percent yield reductions: Topics by WorldWideScience.org

Sample records for percent yield reductions

Irrigation offsets wheat yield reductions from warming temperatures

Science.gov (United States)

Tack, Jesse; Barkley, Andrew; Hendricks, Nathan

2017-11-01

Temperature increases due to climate change are expected to cause substantial reductions in global wheat yields. However, uncertainty remains regarding the potential role for irrigation as an adaptation strategy to offset heat impacts. Here we utilize over 7000 observations spanning eleven Kansas field-trial locations, 180 varieties, and 29 years to show that irrigation significantly reduces the negative impact of warming temperatures on winter wheat yields. Dryland wheat yields are estimated to decrease about eight percent for every one-degree Celsius increase in temperature, yet irrigation completely offsets this negative impact in our sample. As in previous studies, we find that important interactions exist between heat stress and precipitation for dryland production. Here, uniquely, we observe both dryland and irrigated trials side-by-side at the same locations and find that precipitation does not provide the same reduction in heat stress as irrigation. This is likely to be because the timing, intensity, and volume of water applications influence wheat yields, so the ability to irrigate—rather than relying on rainfall alone—has a stronger influence on heat stress. We find evidence of extensive differences of water-deficit stress impacts across varieties. This provides some evidence of the potential for adapting to hotter and drier climate conditions using optimal variety selection. Overall, our results highlight the critical role of water management for future global food security. Water scarcity not only reduces crop yields through water-deficit stress, but also amplifies the negative effects of warming temperatures.
40 CFR 63.5885 - How do I calculate percent reduction to demonstrate compliance for continuous lamination/casting...

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 12 2010-07-01 2010-07-01 true How do I calculate percent reduction to... Pollutants: Reinforced Plastic Composites Production Testing and Initial Compliance Requirements § 63.5885 How do I calculate percent reduction to demonstrate compliance for continuous lamination/casting...
46 CFR 42.20-7 - Flooding standard: Type “B” vessel, 60 percent reduction.

Science.gov (United States)

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false Flooding standard: Type âBâ vessel, 60 percent reduction... DOMESTIC AND FOREIGN VOYAGES BY SEA Freeboards § 42.20-7 Flooding standard: Type “B” vessel, 60 percent... applied to the following flooding standards: (1) If the vessel is 225 meters (738 feet) or less in length...
The decrease in yield strength in NiAl due to hydrostatic pressure

Science.gov (United States)

Margevicius, R. W.; Lewandowski, J. J.; Locci, I.

1992-01-01

The decrease in yield strength in NiAl due to hydrostatic pressure is examined via a comparison of the tensile flow behavior in the low strain regime at 0.1 MPa for NiAl which was cast, extruded, and annealed for 2 hr at 827 C in argon and very slowly cooled to room temperature. Pressurization to 1.4 GPa produces a subsequent reduction at 0.1 MP in proportional limit by 40 percent as well as a 25-percent reduction in the 0.2-percent offset yield strength, while pressurization with lower pressures produces a similar reduction, although smaller in magnitude.
Assessing Sediment Yield and the Effect of Best Management Practices on Sediment Yield Reduction for Tutuila Island, American Samoa

Science.gov (United States)

Leta, O. T.; Dulai, H.; El-Kadi, A. I.

2017-12-01

Upland soil erosion and sedimentation are the main threats for riparian and coastal reef ecosystems in Pacific islands. Here, due to small size of the watersheds and steep slope, the residence time of rainfall runoff and its suspended load is short. Fagaalu bay, located on the island of Tutuila (American Samoa) has been identified as a priority watershed, due to degraded coral reef condition and reduction of stream water quality from heavy anthropogenic activity yielding high nutrients and sediment loads to the receiving water bodies. This study aimed to estimate the sediment yield to the Fagaalu stream and assess the impact of Best Management Practices (BMP) on sediment yield reduction. For this, the Soil and Water Assessment Tool (SWAT) model was applied, calibrated, and validated for both daily streamflow and sediment load simulation. The model also estimated the sediment yield contributions from existing land use types of Fagaalu and identified soil erosion prone areas for introducing BMP scenarios in the watershed. Then, three BMP scenarios, such as stone bund, retention pond, and filter strip were treated on bare (quarry area), agricultural, and shrub land use types. It was found that the bare land with quarry activity yielded the highest annual average sediment yield of 133 ton per hectare (t ha-1) followed by agriculture (26.1 t ha-1) while the lowest sediment yield of 0.2 t ha-1 was estimated for the forested part of the watershed. Additionally, the bare land area (2 ha) contributed approximately 65% (207 ha) of the watershed's sediment yield, which is 4.0 t ha-1. The latter signifies the high impact as well as contribution of anthropogenic activity on sediment yield. The use of different BMP scenarios generally reduced the sediment yield to the coastal reef of Fagaalu watershed. However, treating the quarry activity area with stone bund showed the highest sediment yield reduction as compared to the other two BMP scenarios. This study provides an estimate
An evaluation of 10 percent and 20 percent benzocaine gels in patients with acute toothaches

Science.gov (United States)

Hersh, Elliot V.; Ciancio, Sebastian G.; Kuperstein, Arthur S.; Stoopler, Eric T.; Moore, Paul A.; Boynes, Sean G.; Levine, Steven C.; Casamassimo, Paul; Leyva, Rina; Mathew, Tanya; Shibly, Othman; Creighton, Paul; Jeffers, Gary E.; Corby, Patricia M.A.; Turetzky, Stanley N.; Papas, Athena; Wallen, Jillian; Idzik-Starr, Cynthia; Gordon, Sharon M.

2013-01-01

Background The authors evaluated the efficacy and tolerability of 10 percent and 20 percent benzocaine gels compared with those of a vehicle (placebo) gel for the temporary relief of toothache pain. They also assessed the compliance with the label dose administration directions on the part of participants with toothache pain. Methods Under double-masked conditions, 576 participants self-applied study gel to an open tooth cavity and surrounding oral tissues. Participants evaluated their pain intensity and pain relief for 120 minutes. The authors determined the amount of gel the participants applied. Results The responders’ rates (the primary efficacy parameter), defined as the percentage of participants who had an improvement in pain intensity as exhibited by a pain score reduction of at least one unit on the dental pain scale from baseline for two consecutive assessments any time between the five- and 20-minute points, were 87.3 percent, 80.7 percent and 70.4 percent, respectively, for 20 percent benzocaine gel, 10 percent benzocaine gel and vehicle gel. Both benzocaine gels were significantly (P ≤ .05) better than vehicle gel; the 20 percent benzocaine gel also was significantly (P ≤ .05) better than the 10 percent benzocaine gel. The mean amount of gel applied was 235.6 milligrams, with 88.2 percent of participants applying 400 mg or less. Conclusions Both 10 percent and 20 percent benzocaine gels were more efficacious than the vehicle gel, and the 20 percent benzocaine gel was more efficacious than the 10 percent benzocaine gel. All treatments were well tolerated by participants. Practical Implications Patients can use 10 percent and 20 percent benzocaine gels to temporarily treat toothache pain safely. PMID:23633700
Characterization of the uranium--2 weight percent molybdenum alloy

International Nuclear Information System (INIS)

Hemperly, V.C.

1976-01-01

The uranium-2 wt percent molybdenum alloy was prepared, processed, and age hardened to meet a minimum 930-MPa yield strength (0.2 percent) with a minimum of 10 percent elongation. These mechanical properties were obtained with a carbon level up to 300 ppM in the alloy. The tensile-test ductility is lowered by the humidity of the laboratory atmosphere
Extreme Weather Impacts on Maize Yield: The Case of Shanxi Province in China

Directory of Open Access Journals (Sweden)

Taoyuan Wei

2016-12-01

Full Text Available Extreme weather can have negative impacts on crop production. In this study, we statistically estimate the impacts of dry days, heat waves, and cold days on maize yield based on household survey data from 1993 to 2011 in ten villages of Shanxi province, China. Our results show that dry days, heat waves, and cold days have negative effects on maize yield, although these effects are marginal if these extreme events do not increase dramatically. Specifically, a one percent increase in extreme-heat-degree-days and consecutive-dry-days results in a maize yield declines of 0.2% and 0.07%, respectively. Maize yield also is reduced by 0.3% for cold days occurring during the growing season from May to September. However, these extreme events can increase dramatically in a warmer world and result in considerable reduction in maize yields. If all the historical temperatures in the villages are shifted up by 2 degrees Celsius, total impacts of these extreme events would lead to a reduction of maize yield by over 30 percent. The impacts may be underestimated since we did not exclude the offset effect of adaptation measures adopted by farmers to combat these extreme events.
Revised estimates for ozone reduction by shuttle operation

Science.gov (United States)

Potter, A. E.

1978-01-01

Previous calculations by five different modeling groups of the effect of space shuttle operations on the ozone layer yielded an estimate of 0.2 percent ozone reduction for the Northern Hemisphere at 60 launches per year. Since these calculations were made, the accepted rate constant for the reaction between hydroperoxyl and nitric oxide to yield hydroxyl and nitrogen dioxide, HO2 + NO yields OH + NO2, was revised upward by more than an order of magnitude, with a resultant increase in the predicted ozone reduction for chlorofluoromethanes by a factor of approximately 2. New calculations of the shuttle effect were made with use of the new rate constant data, again by five different modeling groups. The new value of the shuttle effect on the ozone layer was found to be 0.25 percent. The increase resulting from the revised rate constant is considerably less for space shuttle operations than for chlorofluoromethane production, because the new rate constant also increases the calculated rate of downward transport of shuttle exhaust products out of the stratosphere.
Yield Stress Reduction of DWPF Melter Feed Slurries

International Nuclear Information System (INIS)

Stone, M.E.; Smith, M.E.

2007-01-01

The Defense Waste Processing Facility (DWPF) at the Savannah River Site vitrifies High Level Waste for repository internment. The process consists of three major steps: waste pretreatment, vitrification, and canister decontamination/sealing. The HLW consists of insoluble metal hydroxides and soluble sodium salts. The pretreatment process acidifies the sludge with nitric and formic acids, adds the glass formers as glass frit, then concentrates the resulting slurry to approximately 50 weight percent (wt%) total solids. This slurry is fed to the joule-heated melter where the remaining water is evaporated followed by calcination of the solids and conversion to glass. The Savannah River National Laboratory (SRNL) is currently assisting DWPF efforts to increase throughput of the melter. As part of this effort, SRNL has investigated methods to increase the solids content of the melter feed to reduce the heat load required to complete the evaporation of water and allow more of the energy available to calcine and vitrify the waste. The process equipment in the facility is fixed and cannot process materials with high yield stresses, therefore increasing the solids content will require that the yield stress of the melter feed slurries be reduced. Changing the glass former added during pretreatment from an irregularly shaped glass frit to nearly spherical beads was evaluated. The evaluation required a systems approach which included evaluations of the effectiveness of beads in reducing the melter feed yield stress as well as evaluations of the processing impacts of changing the frit morphology. Processing impacts of beads include changing the settling rate of the glass former (which effects mixing and sampling of the melter feed slurry and the frit addition equipment) as well as impacts on the melt behavior due to decreased surface area of the beads versus frit. Beads were produced from the DWPF process frit by fire polishing. The frit was allowed to free fall through a flame
Long Term Evaluation of Yield Stability Trend for Cereal Crops in Iran

Directory of Open Access Journals (Sweden)

mehdi nassiri mahalati

2016-05-01

Full Text Available During the last few decades cereals yield have increased drastically at the national level however, information about yield stability and its resistance to annual environmental variability are scare. In this study long term stability of grin yield of wheat, barley, rice, corn and overall cereals in Iran were evaluated during a 40-year period (1971-2011. Stability analysis was conducted using two different methods. In the first method the residuals of regression between crop yield and time (years were calculated as stability index. For this different segmented regression models including linear, bi-linear and tri-linear were fitted to yield trend data and the best model for each crop was selected based on statistical measures. Absolute residuals (the difference between actual and predicted yields for each year as well as relative residuals (absolute residuals as percent of predicted yield were estimated. In the second method yield stability was estimated from the slope of the regression line between average annual yield of all cereals (environmental index and the yield of each crop in the same year. Results indicted that in wheat and barley absolute and relative residuals were increased during the study period leading to reduction of stability despite considerable yield increment. However, for rice and corn residuals followed a decreasing trend and therefore yield stability of these crops was increased during the last 40 years. The same result was obtained with the environmental index but in this method reduction of yield stability in barley was lower than wheat. Based on the results, yield and yield stability of cereals crops in Iran increased during the last 40 years. However, the percentage increase in stability is lower than that of yield. Application of nitrogen fertilizers was led to reduction in stability. Yield stability of wheat, barley, rice, corn and overall cereals was improved with increasing their cultivated area.
Basal area or stocking percent: which works best in controlling density in natural shortleaf pine stands

Science.gov (United States)

Ivan L. Sander

1986-01-01

Results from a shortleaf pine thinning study in Missouri show that continually thinning a stand to the same basal area will eventually create an understocked stand and reduce yields. Using stocking percent to control thinning intensity allows basal area to increase as stands get older. The best yield should occur when shortleaf pine is repeatedly thinned to 60 percent...
Secondary scintillation yield of xenon with sub-percent levels of CO2 additive for rare-event detection

Science.gov (United States)

Henriques, C. A. O.; Freitas, E. D. C.; Azevedo, C. D. R.; González-Díaz, D.; Mano, R. D. P.; Jorge, M. R.; Fernandes, L. M. P.; Monteiro, C. M. B.; Gómez-Cadenas, J. J.; Álvarez, V.; Benlloch-Rodríguez, J. M.; Borges, F. I. G. M.; Botas, A.; Cárcel, S.; Carríon, J. V.; Cebrían, S.; Conde, C. A. N.; Díaz, J.; Diesburg, M.; Esteve, R.; Felkai, R.; Ferrario, P.; Ferreira, A. L.; Goldschmidt, A.; Gutiérrez, R. M.; Hauptman, J.; Hernandez, A. I.; Hernando Morata, J. A.; Herrero, V.; Jones, B. J. P.; Labarga, L.; Laing, A.; Lebrun, P.; Liubarsky, I.; López-March, N.; Losada, M.; Martín-Albo, J.; Martínez-Lema, G.; Martínez, A.; McDonald, A. D.; Monrabal, F.; Mora, F. J.; Moutinho, L. M.; Muñoz Vidal, J.; Musti, M.; Nebot-Guinot, M.; Novella, P.; Nygren, D. R.; Palmeiro, B.; Para, A.; Pérez, J.; Querol, M.; Renner, J.; Ripoll, L.; Rodríguez, J.; Rogers, L.; Santos, F. P.; dos Santos, J. M. F.; Simón, A.; Sofka, C.; Sorel, M.; Stiegler, T.; Toledo, J. F.; Torrent, J.; Tsamalaidze, Z.; Veloso, J. F. C. A.; Webb, R.; White, J. T.; Yahlali, N.; NEXT Collaboration

2017-10-01

Xe-CO2 mixtures are important alternatives to pure xenon in Time Projection Chambers (TPC) based on secondary scintillation (electroluminescence) signal amplification with applications in the important field of rare event detection such as directional dark matter, double electron capture and double beta decay detection. The addition of CO2 to pure xenon at the level of 0.05-0.1% can reduce significantly the scale of electron diffusion from 10 mm /√{m} to 2.5 mm /√{m}, with high impact on the discrimination efficiency of the events through pattern recognition of the topology of primary ionization trails. We have measured the electroluminescence (EL) yield of Xe-CO2 mixtures, with sub-percent CO2 concentrations. We demonstrate that the EL production is still high in these mixtures, 70% and 35% relative to that produced in pure xenon, for CO2 concentrations around 0.05% and 0.1%, respectively. The contribution of the statistical fluctuations in EL production to the energy resolution increases with increasing CO2 concentration, being smaller than the contribution of the Fano factor for concentrations below 0.1% CO2.
African crop yield reductions due to increasingly unbalanced Nitrogen and Phosphorus consumption

Science.gov (United States)

van der Velde, Marijn; Folberth, Christian; Balkovič, Juraj; Ciais, Philippe; Fritz, Steffen; Janssens, Ivan A.; Obersteiner, Michael; See, Linda; Skalský, Rastislav; Xiong, Wei; Peñuealas, Josep

2014-05-01

The impact of soil nutrient depletion on crop production has been known for decades, but robust assessments of the impact of increasingly unbalanced nitrogen (N) and phosphorus (P) application rates on crop production are lacking. Here, we use crop response functions based on 741 FAO maize crop trials and EPIC crop modeling across Africa to examine maize yield deficits resulting from unbalanced N:P applications under low, medium, and high input scenarios, for past (1975), current, and future N:P mass ratios of respectively, 1:0.29, 1:0.15, and 1:0.05. At low N inputs (10 kg/ha), current yield deficits amount to 10% but will increase up to 27% under the assumed future N:P ratio, while at medium N inputs (50 kg N/ha), future yield losses could amount to over 40%. The EPIC crop model was then used to simulate maize yields across Africa. The model results showed relative median future yield reductions at low N inputs of 40%, and 50% at medium and high inputs, albeit with large spatial variability. Dominant low-quality soils such as Ferralsols, which are strongly adsorbing P, and Arenosols with a low nutrient retention capacity, are associated with a strong yield decline, although Arenosols show very variable crop yield losses at low inputs. Optimal N:P ratios, i.e. those where the lowest amount of applied P produces the highest yield (given N input) where calculated with EPIC to be as low as 1:0.5. Finally, we estimated the additional P required given current N inputs, and given N inputs that would allow Africa to close yield gaps (ca. 70%). At current N inputs, P consumption would have to increase 2.3-fold to be optimal, and to increase 11.7-fold to close yield gaps. The P demand to overcome these yield deficits would provide a significant additional pressure on current global extraction of P resources.
A major challenge for modeling conservation-based water use reductions in aquifers supporting irrigated agriculture: The specific yield quandary

Science.gov (United States)

Butler, J. J., Jr.; Whittemore, D. O.; Wilson, B. B.; Bohling, G.

2017-12-01

Many large regional aquifers supporting irrigated agriculture are experiencing high rates of water-level decline. The primary means of moderating these rates is to reduce pumping. The key question is what percent pumping reduction will significantly impact decline rates. We have recently developed a water-balance approach to address this question for subareas (100s to 1000s km2 in size) of seasonally pumped aquifers (Butler et al., GRL, 2016). This approach also provides an estimate of specific yield (Sy), which has been difficult to estimate from field data at the scale of modeling analyses. When applied to subareas of the High Plains aquifer in Kansas, this approach reveals that the Sy estimate is much lower (as much as a factor of five or more) than expected for an unconsolidated aquifer. One explanation is that the aquifer is heterogeneous with considerable amounts of fine material, whereas field data, such as drillers' logs, are often biased towards coarser intervals. An additional explanation, which appears to have received little attention, is the impact of entrapped air. In seasonally pumped systems, water levels pass through the same aquifer intervals multiple times, giving ample opportunity for air to be entrapped. This entrapped air imbues the aquifer with a specific yield that is considerably lower than what would be expected from lithology. If unrecognized, a larger-than-actual Sy value is input into the aquifer model. This can lead to the inadvertent use of the same-year recharge assumption, which may not be appropriate for many conditions (e.g., large depths to water), and can also result in artificially low estimates of net inflow for a depleting aquifer. Moreover, failure to recognize this condition can bedevil efforts to model conservation-based water use reductions. In that case, models will leave the range of conditions for which they have been calibrated and can become more vulnerable to parameter errors. Conservation-based water use reductions
Evaluation of Hail Simulated Damage on Marketable Tuber Yield of Potato Agria Cultivar in Ardabil Region

Directory of Open Access Journals (Sweden)

D. Hassanpanah

2012-07-01

Full Text Available This study was conducted at Ardabil Agriculture and Natural Resources Research Station during the year of 2010. A factorial experiment based on randomized complete block design with four replications and two factors were used to evaluate the effect of simulated hail damage to foliage at different growth stages of potato Agria cultivar on marketable tuber yield. The first factor consisted of six levels of foliar damage (0, 20, 40, 60, 80 and 100 percent and the second factor of five levels of plant growth stages (2, 5, 8, 11 and 15 weeks after the growing. Analysis of variance showed that there were significant differences among plants for levels and times of hail damage and their interactions in terms of marketable tuber yield. Percentage of marketable yield reduction at early stages of vegetative growth (2 weeks after growing was minimal. Occurrence of hail damage at the tuberization and bulking stages (5, 8 and 11 weeks after growing severely reduced marketable tuber yield. While, its damage at late growing stages of (14 weeks after growing on tuber yield was not appreciable. Times of hail damage on marketable tuber yield reduction was calculated through the regression. Relative reduction of marketable tuber yield at the early stages of vegetative growth, due to hail damage, against non-marketable tuber yield was higher than of bulking stage.
Instability of Reference Diameter in the Evaluation of Stenosis After Coronary Angioplasty: Percent Diameter Stenosis Overestimates Dilative Effects Due to Reference Diameter Reduction

International Nuclear Information System (INIS)

Hirami, Ryouichi; Iwasaki, Kohichiro; Kusachi, Shozo; Murakami, Takashi; Hina, Kazuyoshi; Matano, Shigeru; Murakami, Masaaki; Kita, Toshimasa; Sakakibara, Noburu; Tsuji, Takao

2000-01-01

Purpose: To examine changes in the reference segment luminal diameter after coronary angioplasty.Methods: Sixty-one patients with stable angina pectoris or old myocardial infarction were examined. Coronary angiograms were recorded before coronary angioplasty (pre-angioplasty) and immediately after (post-angioplasty), as well as 3 months after. Artery diameters were measured on cine-film using quantitative coronary angiographic analysis.Results: The diameters of the proximal segment not involved in the balloon inflation and segments in the other artery did not change significantly after angioplasty, but the reference segment diameter significantly decreased (4.7%). More than 10% luminal reduction was observed in seven patients (11%) and more than 5% reduction was observed in 25 patients (41%). More than 5% underestimation of the stenosis was observed in 22 patients (36%) when the post-angioplasty reference diameter was used as the reference diameter, compared with when the pre-angioplasty measurement was used and more than 10% underestimation was observed in five patients (8%).Conclusion: This study indicated that evaluation by percent diameter stenosis, with the reference diameter from immediately after angioplasty, overestimates the dilative effects of coronary angioplasty, and that it is thus better to evaluate the efficacy of angioplasty using the absolute diameter in addition to percent luminal stenosis
Determination of reduction yield of lithium metal reduction process

International Nuclear Information System (INIS)

Choi, In Kyu; Cho, Young Hwan; Kim, Taek Jin; Jee, Kwang Young

2004-01-01

Metal reduction of spent oxide fuel is the first step for the effective storage of spent fuel in Korea as well as transmutation purpose of long-lived radio-nuclides. During the reduction of uranium oxide by lithium metal to uranium metal, lithium oxide is stoichiometrically produced. By determining the concentration of lithium oxide in lithium chloride, we can estimate that how much uranium oxide is converted to uranium metal. Previous method to determine the lithium oxide concentration in lithium chloride is tedious and timing consuming. This paper describe the on-line monitoring method of lithium oxide during the reduction process
Photosynthesis and yield reductions from wheat stem sawfly (Hymenoptera: Cephidae): interactions with wheat solidness, water stress, and phosphorus deficiency.

Science.gov (United States)

Delaney, Kevin J; Weaver, David K; Peterson, Robert K D

2010-04-01

The impact of herbivory on plants is variable and influenced by several factors. The current study examined causes of variation in the impact of larval stem mining by the wheat stem sawfly, Cephus cinctus Norton (Hymenoptera: Cephidae), on spring wheat, Triticum aestivum L. We performed greenhouse experiments over 2 yr to (1) study whether biotic (hollow versus solid stemmed host wheat) and abiotic (water, phosphorus stress) factors interact with C. cinctus stem mining to influence degree of mined stem physiological (photosynthesis) and yield (grain weight) reductions; and (2) determine whether whole plant yield compensatory responses occur to offset stem-mining reductions. Flag leaf photosynthetic reduction was not detected 16-20 d after infestation, but were detected at 40-42 d and doubled from water or phosphorus stresses. Main stem grain weight decreased from 10 to 25% from stem mining, largely due to reductions in grain size, with greater reductions under low phosphorus and/or water levels. Phosphorus-deficient plants without water stress were most susceptible to C. cinctus, more than doubling the grain weight reduction due to larval feeding relative to other water and phosphorus treatments. Two solid stemmed varieties with stem mining had less grain weight loss than a hollow stemmed variety, so greater internal mechanical resistance may reduce larval stem mining and plant yield reductions. Our results emphasize the importance of sufficient water and macronutrients for plants grown in regions impacted by C. cinctus. Also, solid stemmed varieties not only reduce wheat lodging from C. cinctus, they may reduce harvested grain losses from infested stems.
Is Reduction in Yield Potential of Some Brassicaceous Species Due to Aphid Infestation Associated with the Changes in Stomatal Factors of Photosynthesis

International Nuclear Information System (INIS)

Razaq, M.; Farooq, M.; Abbas, G.; Rehman, H. M.; Iqbal, M.

2016-01-01

Aphids cause heavy yield losses to Brassicaceous species by affecting various physiological and biochemical processes including photosynthesis. In the present study, seasonal activity of aphid population and its impact on some brassicaceous species was assessed. Three brassicaceous species (Brassica campestris, Brassica carinata, Eruca sativa) were grown in field following standard agricultural practices. Plants of control plots retained aphid free by insecticide spray, whereas treatment plots were freely allowed for aphid infestation. There was also intermediate treatment of partial aphid infestation where insecticidal spray was applied two times. Peak populations of both aphid species were observed in the 2nd week of March during which plant photosynthetic attributes were recorded. At the time of maturity, yield attributes were also recorded. From the results, it is obvious that application of insecticide significantly reduced the aphid populations on the three brassicaceous species and enhanced the crop yield. Yield losses due to aphid infestation were maximal in Brassica campestris followed by B. carinata whereas it was minimal in Eruca sativa. Yield losses in Brassica campestris and B. carinata were due to reduction in number of pods per plant, number of seeds per pod and size of seeds, whereas yield losses due to aphid infestation in Eruca sativa was mainly attributed to reduction in number of pods per plant. Although insecticidal spray reduced the aphid population and increased growth and productivity of all brassicaceous species, it did not change photosynthetic capacity of all plants except in Eruca sativa. Moreover, growth and yield reduction was not associated with stomatal factors of photosynthesis. Chlorophyll contents measured as SPAD values were reduced due to aphid infestation which is positively associated with yield reduction. Insecticidal spray increased chlorophyll contents in these three brassicaceous species by reducing aphid population

Effect of Integrated Nutrient Management on Yield and Yield ...

African Journals Online (AJOL)

Declining soil fertility is one of the major problems causing yield reduction of barley ... (VC) with inorganic NP on growth, yield and yield components of food barley. ... The experiments were laid out in a randomized complete block design with ...
Locational variation in green fodder yield, dry matter yield, and forage quality of sorghum

International Nuclear Information System (INIS)

Hussain, A.; Khan, S.; Mohammad, D.

2007-01-01

The present study was designed to find out the variations in for- age yield and quality of sorghum as affected by different environments. The three agroecological zones viz., Agricultural Research Institute (ARI), Sariab, Quetta, Ayub Agricultural Research Institute (AARI), Faisalabad and National Agricultural Research Centre (NARC), Islamabad were selected on the basis of different physiography, geology, temperature, and climate and water availability. Crude protein contents, varied from 6.98 to 8.02 percent, crude fibre contents from 30.84 to 31.68 percent, green fodder yield from 38.91 to 50.64 t/ha and dry matter yield from 8.92 to 10.17 t/ha at the three diverse locations. Maximum crude protein and crude fibre contents were obtained at NARC, Islamabad and AARI, Faisalabad. Maximum green fodder and dry matter yields were also observed at NARC, Islamabad and AARI, Faisalabad. It was also noted that the same genotypes showed differential response when planted under the diverse environments for green fodder yield, dry matter yield, crude protein and crude fibre contents. Therefore, it was concluded that these differences in forage yield and quality traits under diverse environments were due to differences in soil types, soil fertility, temperature, rain- fall and other climatic conditions. (author)
Evaluation Physiological Characteristics and Grain Yield Canola Cultivars under end Seasonal Drought Stress in Weather Condition of Ahvaz

Directory of Open Access Journals (Sweden)

A Seyed Ahmadi

2015-07-01

Full Text Available To evaluate canola cultivars response to physiological characteristics and grain yield end seasonal drought stress in weather condition of Ahvaz, farm experiments were done at research farm of Khuzestan agriculture and natural resources center. During 2007-2008 and 2008-2009 crop years. Farm test comprised drought stress was done as split plot form with randomize complete block design with four replication, treatments consist of drought stress (main factor including 50, 60 and 70 percent of water use content, which was applied from early heading stage until physiological maturity, and three spring canola cultivar including Shirali, Hayola 401 and R.G.S. were considered as sub plots. Measurements include biological yield, grain yield, harvesting index, number of pod per plant 1000 grain weight, number of grain in pod, plant height, and stem diameter, oil and protein percentage. Results showed that drought stress reduced significantly grain yield, biological yield, harvest index and the average of reduction of them during 2 years for per unit reduce moisture from 50% to 70% were 2, 1.35, and 0.81 percent, respectively. During two years, 1000 grain weight, number of pods per plant and number of grain per pod reduced 27, 36 and 20 percent, respectively. Terminal Drought stress reduced significantly plant height, stem diameter, stem number per plant and pod length, this reduced were 12, 46, 36 and 14 percent, respectively. Stem diameter, and stem number per plant reduced more than other characteristics. In this study oil grain decreased 12 % and protein grain increased 18.5% but oil and protein yield decreased 44.9% and 27.1% respectively..Finally, in weather condition of Khuzestan, terminal drought stress on February and March in which has simultaneous with early flowering stage and filling seed, significantly, reduced yield and compounded yield and affects on stem growth and qualities oil and protein negatively. Therefore, with irrigation
Manifestation of external size reduction effects on the yield point of nanocrystalline rhodium using nanopillars approach

International Nuclear Information System (INIS)

Alshehri, Omar; Yavuz, Mustafa; Tsui Ting

2013-01-01

In this study, pure rhodium was fabricated and mechanically investigated at the nanoscale for the first time. The nanopillars approach was employed to study the effects of size on the yield point. Nanopillars with different diameters were fabricated using electroplating followed by uniaxial compression tests. Scanning electron microscopy (SEM) was used as a quality control technique by imaging the pillars before and after compression to ensure the absence of cracks, buckling, barrelling or any other problems. Transmission electron microscopy and SEM were used as microstructural characterization techniques. Due to substrate-induced effects, only the plastic region of the stress–strain curves were investigated, and it was revealed that the yield point increases with size reduction up to certain limit, then decreases with further reduction of the nanopillar size (diameter). The later weakening effect is consistent with the literature, which demonstrates the reversed size effect (the failure of the plasticity theory) in nanocrystalline metals, i.e. smaller is weaker. In this study, however, the effect of size reduction is not only weakening, but is strengthening-then-weakening, which the authors believe is the true behavior of nanocrystalline materials.
Determining the Threshold Value of Basil Yield Reduction and Evaluation of Water Uptake Models under Salinity Stress Condition

Directory of Open Access Journals (Sweden)

M. Sarai Tabrizi

2016-10-01

Full Text Available Introduction: Several mathematical models are being used for assessing the plant response to the salinity of the root zone. The salinity of the soil and water resources is a major challenge for agricultural sector in Iran. Several mathematical models have been developed for plant responses to the salinity stress. However, these models are often applicable in particular conditions. The objectives of this study were to evaluate the threshold value of Basil yield reduction, modeling Basil response to salinity and to evaluate the effectiveness of available mathematical models for the yield estimation of the Basil . Materials and Methods: The extensive experiments were conducted with 13 natural saline water treatments including 1.2, 1.8, 2, 2.2, 2.5, 2.8, 3, 3.5, 4, 5, 6, 8, and 10 dSm-1. Water salinity treatments were prepared by mixing Shoor River water with fresh water. In order to quantify the salinity effect on Basil yield, seven mathematical models including Maas and Hoffman (1977, van Genuchten and Hoffman (1984, Dirksen and Augustijn (1988, and Homaee et al., (2002 were used. One of the relatively recent methods for soil water content measurements is theta probes instrument. Theta probes instrument consists of four probes with 60 mm long and 3 mm diameter, a water proof container (probe structure, and a cable that links input and output signals to the data logger display. The advantages that have been attributed to this method are high precision and direct and rapid measurements in the field and greenhouse. The range of measurements is not limited like tensiometer and is from saturation to wilting point. In this study, Theta probes instrument was calibrated by weighing method for exact irrigation scheduling. Relative transpiration was calculated using daily soil water content changes. A coarse sand layer with 2 centimeters thick was used to decrease evaporation from the surface soil of the pots. Quantity comparison of the used models was done
Ecohydrology of agroecosystems: probabilistic description of yield reduction risk under limited water availability

Science.gov (United States)

Vico, Giulia; Porporato, Amilcare

2013-04-01

Supplemental irrigation represents one of the main strategies to mitigate the effects of climate variability and stabilize yields. Irrigated agriculture currently provides 40% of food production and its relevance is expected to further increase in the near future, in face of the projected alterations of rainfall patterns and increase in food, fiber, and biofuel demand. Because of the significant investments and water requirements involved in irrigation, strategic choices are needed to preserve productivity and profitability, while maintaining a sustainable water management - a nontrivial task given the unpredictability of the rainfall forcing. To facilitate decision making under uncertainty, a widely applicable probabilistic framework is proposed. The occurrence of rainfall events and irrigation applications are linked probabilistically to crop development during the growing season and yields at harvest. Based on these linkages, the probability density function of yields and corresponding probability density function of required irrigation volumes, as well as the probability density function of yields under the most common case of limited water availability are obtained analytically, as a function of irrigation strategy, climate, soil and crop parameters. The full probabilistic description of the frequency of occurrence of yields and water requirements is a crucial tool for decision making under uncertainty, e.g., via expected utility analysis. Furthermore, the knowledge of the probability density function of yield allows us to quantify the yield reduction hydrologic risk. Two risk indices are defined and quantified: the long-term risk index, suitable for long-term irrigation strategy assessment and investment planning, and the real-time risk index, providing a rigorous probabilistic quantification of the emergence of drought conditions during a single growing season in an agricultural setting. Our approach employs relatively few parameters and is thus easily and
The Effect Different Fertilizers, on Germination, Yield, of Vicia vilosa Roth

Directory of Open Access Journals (Sweden)

R Kamaei

2015-09-01

Full Text Available In order to study the interaction of germination, yield of Vicia vilosa Roth to use of biological fertilizer, chemical, and manure, an experiment was conducted as a randomized complete block design with three replications at Research greenhouse, Faculty of Agriculture, Ferdowsi University of Mashhad, Iran, in 2013-2014 growing season. The experimental treatments was included three kinds of bio fertilizers and their integration with each other and vermicompost and chemical fertilizer as following : 1- mycorhhizaarbuscular species Glomus mosseae+vermicompost2- mycorhhiza+Nitrocsin (included bacteries Azospirillum sp. and Azotobacter sp. 3- mycorhhiza arbuscular+ Rhizobium (Rhizobium sp. 4-mycorhhiza arbuscular + Chemical fertilizer NPK 5- mycorhhizaarbuscular (Glomus moseae 6-control. The results showed that, although the treatments has not significant effects on height of stem , it has significant effects on characteristics of root length colonization percent, number the root node, Root dry weight, soggy yield, yield dry and protein Percent. The results showed that the highest percent of root length colonization(76 percent, number the root node (20, Root dry weight (.94 g, soggy yield (1894.5 g m-2, yield dry (473.63 g m-2 and protein Percent (27.33 percent was gained in integrated mycorhhiza and nitrocsine treatment. On the basis of results, the integration of mycrhhoriza and biological rhizobium is suggested as the best fertilizer treatment for Vicia vilosa Roth.
Pyrochemical recovery of plutonium from calcium fluoride reduction slag

Science.gov (United States)

Christensen, D.C.

A pyrochemical method of recovering finely dispersed plutonium metal from calcium fluoride reduction slag is claimed. The plutonium-bearing slag is crushed and melted in the presence of at least an equimolar amount of calcium chloride and a few percent metallic calcium. The calcium chloride reduces the melting point and thereby decreases the viscosity of the molten mixture. The calcium reduces any oxidized plutonium in the mixture and also causes the dispersed plutonium metal to coalesce and settle out as a separate metallic phase at the bottom of the reaction vessel. Upon cooling the mixture to room temperature, the solid plutonium can be cleanly separated from the overlying solid slag, with an average recovery yield on the order of 96 percent.
The Effect of Water Deficit stress on Osmotic Metabolites and Anti Oxidant System and Grain and Oil Yield of Amaranth CV. Koniz

Directory of Open Access Journals (Sweden)

Mehrdad Yarnia

2015-01-01

Full Text Available Drought is one of the most important environmental stresses that highly affect crop growth and yield. But the response of crops to stress depending on the timing of crop growth stages is different. The purpose of this study was to investigate effect of different levels of water stress (irrigation after 50, 80, 110, 140 and 170 mm evaporation from pan on different stages of Amaranth growth (establishment, branching, flowering and grain filling. To find the effects of water deficit stress on this plant it was decided to determine its protein percentage, oil and grain yields under drought stress. Evaluation of physiological characteristics as to the extent of osmotic adjustment and antioxidant activity was also carried out. Results showed that water deficit stress,depending on the severity and duration of stress, caused a reduction between between a minimum of 10 to a maximum of 89 percent in yield, 28 to 70 percent in harvest index, 12 to 32 percent in grain protein and 29 to 97 percent in oil yield. This indicates the high sensitivity of grain and oil yields to severe and prolonged drought stresses. Changes in osmotic substances (proline and soluble carbohydrates showed that this crop under water stress conditions increased proline and soluble carbohydrates by 31 and 50 percents, respectively. Thus, if could be said that under severe droughts the ability of crops to cops with drought will be reduced. Similarly, amaranth, to cope with water stress, increases the amount of antioxidant enzymes like catalase, peroxidase and super oxid dismutase up to 53, 23 and 79%, respectively. Higher amount of super oxid dismutase enzyme produce as the result of drought stress may play an important role to cope with reactive oxygen species and oxidative stresses.
Optimal placement of trailing-edge flaps for helicopter vibration reduction using response surface methods

Science.gov (United States)

Viswamurthy, S. R.; Ganguli, Ranjan

2007-03-01

This study aims to determine optimal locations of dual trailing-edge flaps to achieve minimum hub vibration levels in a helicopter, while incurring low penalty in terms of required trailing-edge flap control power. An aeroelastic analysis based on finite elements in space and time is used in conjunction with an optimal control algorithm to determine the flap time history for vibration minimization. The reduced hub vibration levels and required flap control power (due to flap motion) are the two objectives considered in this study and the flap locations along the blade are the design variables. It is found that second order polynomial response surfaces based on the central composite design of the theory of design of experiments describe both objectives adequately. Numerical studies for a four-bladed hingeless rotor show that both objectives are more sensitive to outboard flap location compared to the inboard flap location by an order of magnitude. Optimization results show a disjoint Pareto surface between the two objectives. Two interesting design points are obtained. The first design gives 77 percent vibration reduction from baseline conditions (no flap motion) with a 7 percent increase in flap power compared to the initial design. The second design yields 70 percent reduction in hub vibration with a 27 percent reduction in flap power from the initial design.
Yield Potential of Hemp (Cannabis sativa L.) Cultivars in Denmark

DEFF Research Database (Denmark)

Deleuran, Lise Christina; Flengmark, Poul Kristiansen

2005-01-01

In order to determine the yield potential of fibre hemp in Denmark, defined as seed yield, biomass, stem and fibre production, five cultivars were evaluated in field trials at two sites during 1998-2000. The total dry matter yield, stem yield, fibre yield, fibre percent, plant height, and seed...
The question about increasing of thermoelectrical Q and percent of the yield of the semiconductor material on the basis of chalcogenides of the bismuth and antimony under conditions of experimental-industrial production

International Nuclear Information System (INIS)

Magerramov, A.A.; Barkhalov, B.S.

2005-01-01

Full text : Different methods of the receiving of monocrystalline ingots of the semiconductor materials for thermo electrical inverter of energy have been considered. On the basis of the analyses of theoretical and experimental data generated series of recommendations, directed to increase thermo electrical Q receiving from thermo electrical materials and increasing percent of yield of semiconductor materials on the basis of chalcogenides of the bismuth and antimony on the basis of industrial production
Response of Yield and Yield Components of Tef [Eragrostis Tef ...

African Journals Online (AJOL)

The partial budget analysis also indicates that applications of 46 kg. N ha-1 and 10 kg P ha-1 are ..... (1994) indicated that where the grain yield response is negative, yield reduction is primarily caused by a .... An Economic Training. Manual.
Forage Yield and Quality Performance of Rabi Cereals Sown Alone and In Blended Population of Variable Seed Ratios

International Nuclear Information System (INIS)

Tahir, M.; Zafar, N.

2016-01-01

Fodder crops are the main source of animal feed in Pakistan. However, the yield per acre is still far below than optimum production level of the livestock. From this perspective, a field trial was conducted using seeds of three cereal crops wheat, oat and barley sown alone and blended together at different seed proportions (100 percent: 0 percent, 75 percent + 25 percent, 50 percent + 50 percent and 25 percent + 75 percent) at the Agronomic Research Area, Department of Agronomy, University of Agriculture, Faisalabad, during 2013-14. The results showed that the crop mixtures and their variable seed ratios showed significant effects on fodder yield and quality traits. The maximum number of tillers, number of leaves plant/sup -1/, leaf area, crop growth rate, fresh weight plant/sup -1/, dry weight plant/sup -1/, green forage yield and dry matter yield were obtained in plots where barley was sown alone at 100 percent seed ratio. The highest crude fiber and total ash percentage was observed in plots where oat was sown alone at 100 percent seed ratio and crude protein percentage was highest when oat was blended together with barley at 75 percent + 25 percent seed ratios. (author)
Photocatalytic reduction of CO2 to CO over copper decorated g-C3N4 nanosheets with enhanced yield and selectivity

Science.gov (United States)

Shi, Guodong; Yang, Lin; Liu, Zhuowen; Chen, Xiao; Zhou, Jianqing; Yu, Ying

2018-01-01

Photocatalytic reduction of CO2 to fuel has attracted considerable attention due to the consumption of fossil fuels and serious environmental problems. Although there are many photocatalysts reported for CO2 reduction, the improvement of activity and selectivity is still in great need of. In this work, a series of Cu nanoparticle decorated g-C3N4 nanosheets with different Cu loadings were fabricated by a facile secondary calcination and subsequent microwave hydrothermal method. The designed catalysts shown good photocatalytic activity and selectivity for CO2 reduction to CO. The optimal sample exhibited a 3-fold augmentation of the CO yield in comparison with pristine g-C3N4 under visible light. It is revealed that with the loading of Cu nanoparticles, the resulting photocatalyst possessed an improved charge carrier transfer and separation efficiency as well as increased surface reactive sites, resulting in a significant enhancement of CO yield. It is anticipated that the designed Cu/C3N4 photocatalyst may provide new insights for two dimensional layer materials and non-noble particles applied to CO2 reduction.
46 CFR 42.20-8 - Flooding standard: Type “B” vessel, 100 percent reduction.

Science.gov (United States)

2010-10-01

... 46 Shipping 2 2010-10-01 2010-10-01 false Flooding standard: Type âBâ vessel, 100 percent... LINES DOMESTIC AND FOREIGN VOYAGES BY SEA Freeboards § 42.20-8 Flooding standard: Type “B” vessel, 100...-11 as applied to the following flooding standards: (1) If the vessel is 225 meters (738 feet) or less...
Effect of Dose and Oxadiargyl Application Time at the Different Growth Stages on Weed Biomass and Tuber Yield of Potato (Solanum tuberosum L.

Directory of Open Access Journals (Sweden)

E. Samadi Kalkhoran

2016-01-01

Full Text Available To evaluate the effects of dose and application time of oxadiargyl, as a postemergence herbicide, on weed biomass and tuber yield of potato, a factorial experiment based on randomized complete block design with 3 replications was conducted at Alaroog Research Station at the University of Mohaghegh-Ardabili in 2013. Treatments consisted of oxadiargyl dosages (0, 0.05, 0.1, 0.2, 0.4, 0.6 and 0.8 lit a.i /ha, and its time of applications at different potato growth stages (potato emergence, stolon initiation and potato tuber bulking, weed free treatment was considered as control. Statistical analysis showed that 0.8 lit a.i/ha of oxadiargyl reduced biomass of weed by 66.16 percent. Oxadiargyl application at emergence time resulted in highest percent reduction of weed biomass. Results, also, showed that application 0.8 lit a.i/ha of oxadiargyl, after weed free condition, increased number of seed tuber and total tuber yield by 82.16 and 51.59 percent respectively, but it reduced number of non seed tuber by 43.17 percent. Application of oxadiargyl at emergence time, as compared with the other application times, resulted in highest increase in the number of seed tuber and total tuber yield, but it did not affected number of non seed tubers. Interaction effect of dose by time of oxadiargyl application revealed that using 0.8 lit a.i/ha dose at potato emergence time increased number of edible tubers by 100%. It may be conducted that application of this dose at potato emergence time was highly efficient in controlling weeds and increasing potato tuber yield.
Computer optimization of cutting yield from multiple ripped boards

Science.gov (United States)

A.R. Stern; K.A. McDonald

1978-01-01

RIPYLD is a computer program that optimizes the cutting yield from multiple-ripped boards. Decisions are based on automatically collected defect information, cutting bill requirements, and sawing variables. The yield of clear cuttings from a board is calculated for every possible permutation of specified rip widths and both the maximum and minimum percent yield...
Interaction Effects of Planting Date and Weed Competition on Yield and Yield Components of Three white Bean Cultivars in Semirom

Directory of Open Access Journals (Sweden)

A. Yadavi

2012-06-01

Full Text Available Unsuitable planting and weed competition are the most important factors that greatly reduce the yield of bean. In order to study the effect of planting date on yield and yield components of three white bean cultivars in weed infest and weed free condition a factorial experiment with randomized complete block design and three replications was carried out at Semirom in 2009. The treatments were planting date (May10, May 25 and June 9 and white bean cultivars (Shekofa, Pak and Daneshkade and two levels of weed infestation (weedy and weed free. Results showed that planting date, weed competition and cultivars had significant effects on yield and yield components of white bean. The 30-day delay in planting date reduced the number of pods per plant, seeds per pod, 100 seed weight and biological yield of white bean cultivars, 22.5, 18, 20.1 and 22.5 percent respectively. Also weed competition, reduced the number of seeds per pod, 100 seed weight and biological yield respectively by 13.5, 5.7 and 27.1 percent. Result of planting date and weed competition interaction effects indicated that the weed competition decreased grain yield (53% in third planting date more than others and delay in planting date was companion with increasing weed density and dry weight in flowering stage of bean. Also Shekofa cultivar had highest grain yield (3379 kg/ha at the first planting date and weed free condition.
Post-anaerobic digestion thermal hydrolysis of sewage sludge and food waste: Effect on methane yields, dewaterability and solids reduction.

Science.gov (United States)

Svensson, Kine; Kjørlaug, Oda; Higgins, Matthew J; Linjordet, Roar; Horn, Svein J

2018-04-01

Post-anaerobic digestion (PAD) treatment technologies have been suggested for anaerobic digestion (AD) to improve process efficiency and assure hygenization of organic waste. Because AD reduces the amount of organic waste, PAD can be applied to a much smaller volume of waste compared to pre-digestion treatment, thereby improving efficiency. In this study, dewatered digestate cakes from two different AD plants were thermally hydrolyzed and dewatered, and the liquid fraction was recirculated to a semi-continuous AD reactor. The thermal hydrolysis was more efficient in relation to methane yields and extent of dewaterability for the cake from a plant treating waste activated sludge, than the cake from a plant treating source separated food waste (SSFW). Temperatures above 165 °C yielded the best results. Post-treatment improved volumetric methane yields by 7% and the COD-reduction increased from 68% to 74% in a mesophilic (37 °C) semi-continuous system despite lowering the solid retention time (from 17 to 14 days) compared to a conventional system with pre-treatment of feed substrates at 70 °C. Results from thermogravimetric analysis showed an expected increase in maximum TS content of dewatered digestate cake from 34% up to 46% for the SSFW digestate cake, and from 17% up to 43% in the sludge digestate cake, after the PAD thermal hydrolysis process (PAD-THP). The increased dewatering alone accounts for a reduction in wet mass of cake leaving the plant of 60% in the case of sludge digestate cake. Additionaly, the increased VS-reduction will contribute to further reduce the mass of wet cake. Copyright © 2018 Elsevier Ltd. All rights reserved.

Simulation of runoff and sediment yield from a hilly watershed in the eastern Himalaya, India using the WEPP model

Science.gov (United States)

Singh, R. K.; Panda, R. K.; Satapathy, K. K.; Ngachan, S. V.

2011-08-01

SummaryA study was undertaken to develop appropriate vegetative as well as structural measures to control sediment yield from a 239.44 ha small multi-vegetated watershed in high rainfall and high land slope conditions of eastern Himalayan range in India using a physically based distributed parameters Water Erosion Prediction Project (WEPP) model. The model was calibrated and validated using field-measured data pertaining to 86 storms of monsoon season 2003 and 98 storms of 2004. The daily simulated runoff and sediment yield of the Umroi watershed for the calibration and validation periods were found to match with their measured counterparts at 95% significance level as shown by the Student's t-tests. The model simulated daily runoff quite well as corroborated by reasonably high Nash-Sutcliffe simulation coefficients of 0.94 and 0.87, low root mean square errors of 1.42 and 1.77 mm, and low percent deviations of -1.71 and -3.01, respectively for calibration and validation periods. The performance of the model for simulating daily sediment yield was also quite good with Nash-Sutcliffe simulation coefficients of 0.95 and 0.90, root mean square errors of 0.08 and 0.09 Mg ha -1 and percent deviations of 3.05 and -5.23, respectively for calibration and validation periods. Subsequently, the calibrated and validated model was used to simulate vegetative (crop, level of fertilization and tillage) and structural (rock-fill check dam and trash barrier) measures and combinations of vegetative and structural control to evaluate their impacts on runoff and sediment yield reduction. Simulations of different vegetative management scenarios indicated that replacing traditional bun agriculture and upland paddy crop with maize, soybean, and peanut would reduce sediment yield by 18.68, 29.60 and 27.70%, respectively. Field cultivator and drill-no-tillage systems have the potential to reduce sediment yield by 13.14 and 21.88%, respectively as compared to the existing practice of
Percent Coverage

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The Percent Coverage is a spreadsheet that keeps track of and compares the number of vessels that have departed with and without observers to the numbers of vessels...
Effect of Nitrogen and biological Fertilizers on Seed Yield and Fatty acid Composition of Sesame cultivars under Yazd conditions

Directory of Open Access Journals (Sweden)

E Shakeri

2013-04-01

Full Text Available To investigate the effect of different levels of nitrogen fertilizer and biofertilizers Azotobacter sp. and Azosprillum sp. on seed yield, oil yield and its percent and fatty acid composition in three sesame (Sesamum indicum L. cultivars an experiment was conducted using splite plot factorial arrangement based on randomized complete block design with three replications at Agricultural and Natural Resources Reasearch Center of Yazd in 2009 cropping season. The treatments included : cultivars ( Darab-14, Jiroft and Yazdi assigned to main plots, nitrogen fertilizer (0, 25 and 50 kg ha-1 and biofertilizer (inoculation and no-inoculation as factorial were randomized in sub-plots. Oil percent was measured using the Soxhlet method and fatty acid composition was measured using GC method. Results showed the significant differenc among three varieties concerning seed yield, oil yield and four fatty acids (oleic, linoleic, palmetic and stearis acid. Seed yield, oil yield, Oleic, Linolenic and Arasshidic acid significantly increased with applying N fertilizer. Seed yield, oil yield and linolenic acid percent significantly increased with applying biofertilizer. Oleic acid percent had negative and significant correlation with Linoleic acid (r = -0.759** and stearic acid (r=-0.774** percent. Generally, results showed the importance of applying biofertilizers against chemical fertilizers to protect the environment from harmful chemical pollution.
Cumulative percent energy deposition of photon beam incident on different targets, simulated by Monte Carlo

International Nuclear Information System (INIS)

Kandic, A.; Jevremovic, T.; Boreli, F.

1989-01-01

Monte Carlo simulation (without secondary radiation) of the standard photon interactions (Compton scattering, photoelectric absorption and pair protection) for the complex slab's geometry is used in numerical code ACCA. A typical ACCA run will yield: (a) transmission of primary photon radiation differential in energy, (b) the spectrum of energy deposited in the target as a function of position and (c) the cumulative percent energy deposition as a function of position. A cumulative percent energy deposition of photon monoenergetic beam incident on simplest and complexity tissue slab and Fe slab are presented in this paper. (author). 5 refs.; 2 figs
Investigation of Yield and Yield Components of Canary Seed Forage (Phalaris canariensis L. in Response to Different Levels of Irrigation, Organic and Chemical Fertilizers and their integration

Directory of Open Access Journals (Sweden)

V Varnaseri Ghandali

2016-12-01

Full Text Available Introduction Canary seed (Phalaris canariensis L. is a forage plant from Poaceae family. This plant is drought tolerant. Canary seed is originally a native to Mediterranean region, which can be grown commercially in several parts of the word, especially in semi-arid conditions. Increasing growth of population and lack of ability of pastures to satisfy the food requirement of animal has led to more interest in cultivating forage plants. In this regard, Canary seed having properties such as high yield per unit area, high tillering power, very fast growth and appropriate nutritional value, is of considerable importance and its cultivation development especially in arid and semi-arid regions can be effective in providing part of the country forage needs. Optimum water requirement is considered as one the important factors to obtain a high growth and yield of the product. On the other hand, Iran is located in arid and semi-arid climate region of the world . Therefore, determination of appropriate amount of irrigation water can lead to the improvement of water use efficiency and preventing the water loss. In order to achieve a high yield and desirable quality in plants one of the important requirements in agricultural planning is the evaluation of different systems of plant feeding. By applying an appropriate method in soil productivity, in addition to protecting the environment, optimization of water usage, reduction of erosion and protection of biodiversity can be increased. Therefore, gradually replacing chemical fertilizers with biological and organic fertilizers will result in providing feed requirements of plants, improvement of physical, chemical and biological conditions of soil and reduction of adverse environmental effects resulting from application of chemical inputs. The aim of this research was to study the effects of deficit irrigation and fertilizer management based on sole chemical and organic fertilizers or their integrated
Refinement and evaluation of the Massachusetts firm-yield estimator model version 2.0

Science.gov (United States)

Levin, Sara B.; Archfield, Stacey A.; Massey, Andrew J.

2011-01-01

to assess the sensitivity of firm-yield estimates to errors in daily-streamflow input data. Results of the Monte Carlo simulations indicate that underestimation in the lowest stream inflows can cause firm yields to be underestimated by an average of 1 to 10 percent. Errors in the stage-storage relation can arise when the point density of bathymetric survey measurements is too low. Existing bathymetric surfaces were resampled using hypothetical transects of varying patterns and point densities in order to quantify the uncertainty in stage-storage relations. Reservoir-volume calculations and resulting firm yields were accurate to within 5 percent when point densities were greater than 20 points per acre of reservoir surface. Methods for incorporating summer water-demand-reduction scenarios into the firm-yield model were developed as well as the ability to relax the no-fail reliability criterion. Although the original firm-yield model allowed monthly reservoir releases to be specified, there have been no previous studies examining the feasibility of controlled releases for downstream flows from Massachusetts reservoirs. Two controlled-release scenarios were tested—with and without a summer water-demand-reduction scenario—for a scenario with a no-fail criterion and a scenario that allows for a 1-percent failure rate over the entire simulation period. Based on these scenarios, about one-third of the reservoir systems were able to support the flow-release scenarios at their 2000–2004 usage rates. Reservoirs with higher storage ratios (reservoir storage capacity to mean annual streamflow) and lower demand ratios (mean annual water demand to annual firm yield) were capable of higher downstream release rates. For the purposes of this research, all reservoir systems were assumed to have structures which enable controlled releases, although this assumption may not be true for many of the reservoirs studied.
Photosynthetic rate, dry matter accumulation and yield inter-relationships jn genotypes of rice

International Nuclear Information System (INIS)

Devendra, R.; Udaya Kumar, M.; Krishna Sastry, K.S.

1980-01-01

The relationship between photosynthetic efficiency, dry matter accumulation and yield in five genotypes of paddy derived from a single cross between Jaya X Halubbalu was studied. Photosynthetic efficiency of younger leaves, on the main tiller was higher than in the older leaves. A significant positive correlation between RuDPcase activity and photosynthetic efficiency was observed in these genotypes. Also a similar positive correlation between dry matter production and photosynthetic efficiency during vegetative period but not during post-anthesis period was observed. Genotypes with high photosynthetic efficiency and also the genotypes with high LAD produced higher dry matter. A reduction in LAD or in photosynthetic efficiency during the post-anthesis period and thus a reduction in source capacity which occurred specially in late types resulted in a lesser ratio between productive and total tillers and also higher percent sterility. Differences in yield amongst the genotypes were not significant, since in the late types MR. 333 and MR. 335, the post-anthesis dry matter production was low due to lesser source capacity. But in the early types, though the total dry matter was less, the post-anthesis source capacity was high. The importance of post-anthesis leaf area of photo-synthetic efficiency in productivity in genotypes of rice is highlighted. (author)
Influence of Inter-Intra Row Spacing on Yield Losses of Tomato ...

African Journals Online (AJOL)

Data on major yield loss agents such as, blossom end rot, decay, insect, disease, sunburn, crack, catface and others minor disorders were collected; as well as total yield, percent of marketable and unmarketable fruit yield parameters were analyzed. Results of the study showed that inter-intra row spacing and cultivar had a ...
Reduction in clover-grass yield caused by different traffic intensities

DEFF Research Database (Denmark)

Green, Ole; Jørgensen, Rasmus Nyholm; Kristensen, Kristian

Different traffic intensities have been shown to have a negative influence on the yield of grass and clover. A full scale grass-clover field trial was established to estimate the effect on clover-grass yields as a function of different wheel loads and tire pressures. The trial comprised 16...... close to the north, south and east border of the field. No significant interactions were found between the timing of crop and soil damage as affected by wheel load and tire pressure. However, at specific times, there was a significant effect of wheel load and secondary by the tire pressure. At all...... measurement times, the yield was lower using a wheel load of 4745 kg than for a wheel load of 2865 kg. Key words (for Electronic Reference Library) Traffic intensities, tire load/pressure, clover/grass, yield loss, ...
European Community Can Reduce CO2 Emissions by Sixty Percent : A Feasibility Study

NARCIS (Netherlands)

Mot, E.; Bartelds, H.; Esser, P.M.; Huurdeman, A.J.M.; Laak, P.J.A. van de; Michon, S.G.L.; Nielen, R.J.; Baar, H.J.W. de

1993-01-01

Carbon dioxide (CO2) emissions in the European Community (EC) can be reduced by roughly 60 percent. A great many measures need to be taken to reach this reduction, with a total annual cost of ECU 55 milliard. Fossil fuel use is the main cause of CO2 emissions into the atmosphere; CO2 emissions are
A dose-response relationship for marketable yield reduction of two lettuce (Lactuca sativa L.) cultivars exposed to tropospheric ozone in Southern Europe.

Science.gov (United States)

Marzuoli, Riccardo; Finco, Angelo; Chiesa, Maria; Gerosa, Giacomo

2017-12-01

The present study investigated the response to ozone (O 3 ) of two cultivars (cv.'Romana' and cv. 'Canasta') of irrigated lettuce grown in an open-top chamber (OTC) experiment in Mediterranean conditions. Two different levels of O 3 were applied, ambient O 3 in non-filtered OTCs (NF-OTCs) and -40% of ambient O 3 in charcoal-filtered OTCs (CF-OTCs), during four consecutive growing cycles. At the end of each growing cycle, the marketable yield (fresh biomass) was assessed while during the growing periods, measurements of the stomatal conductance at leaf level were performed and used to define a stomatal conductance model for calculation of the phytotoxic ozone dose (POD) absorbed by the plants.Results showed that O 3 caused statistically significant yield reductions in the first and in the last growing cycle. In general, the marketable yield of the NF-OTC plants was always lower than the CF-OTC plants for both cultivars, with mean reductions of -18.5 and -14.5% for 'Romana' and 'Canasta', respectively. On the contrary, there was no statistically significant difference in marketable yield due to the cultivar factor or to the interaction between O 3 and cultivar in any of the growing cycle performed.Dose-response relationships for the marketable relative yield based on the POD values were calculated according to different flux threshold values (Y). The best regression fit was obtained using an instantaneous flux threshold of 6 nmol O 3 m -2 s -1 (POD 6 ); the same value was obtained also for other crops. According to the generic lettuce dose-response relationship, an O 3 critical level of 1 mmol O 3 m -2 of POD 6 for a 15% of marketable yield loss was found.
Percent Wetland Cover

Data.gov (United States)

U.S. Environmental Protection Agency — Wetlands act as filters, removing or diminishing the amount of pollutants that enter surface water. Higher values for percent of wetland cover (WETLNDSPCT) may be...
effect of deficit irrigation on growth and yield of okro

African Journals Online (AJOL)

User

reduce the demand for irrigation water (Boland et al., 1993). Deficit irrigation is another way in which water use efficiency can be maximized for higher yields per unit of irrigation water. Stegman (1982) reported that the yield of maize, sprinkler irrigated to induce a 30 - 40 percent depletion of available water between.
Determining the Threshold Value of Basil Yield Reduction and Evaluation of Water Uptake Models under Salinity Stress Condition

OpenAIRE

M. Sarai Tabrizi; H. Babazadeh; M. Homaee; F. Kaveh Kaveh; M. Parsinejad

2016-01-01

Introduction: Several mathematical models are being used for assessing the plant response to the salinity of the root zone. The salinity of the soil and water resources is a major challenge for agricultural sector in Iran. Several mathematical models have been developed for plant responses to the salinity stress. However, these models are often applicable in particular conditions. The objectives of this study were to evaluate the threshold value of Basil yield reduction, modeling Basil respon...
Inspiration: One Percent and Rising

Science.gov (United States)

Walling, Donovan R.

2009-01-01

Inventor Thomas Edison once famously declared, "Genius is one percent inspiration and ninety-nine percent perspiration." If that's the case, then the students the author witnessed at the International Student Media Festival (ISMF) last November in Orlando, Florida, are geniuses and more. The students in the ISMF pre-conference workshop…
On energy consumption for size-reduction and yields from subsequent enzymatic saccharification of pretreated lodgepole pine.

Science.gov (United States)

Zhu, W; Zhu, J Y; Gleisner, R; Pan, X J

2010-04-01

This study investigated the effects of chemical pretreatment and disk-milling conditions on energy consumption for size-reduction and the efficiency of enzymatic cellulose saccharification of a softwood. Lodgepole pine wood chips produced from thinnings of a 100-year-old unmanaged forest were pretreated by hot-water, dilute-acid, and two SPORL processes (Sulfite Pretreatment to Overcome Recalcitrance of Lignocellulose) at acid charge on oven dry (od) wood of 0% and 2.21%. The pretreated wood chips were then milled using a laboratory disk mill under various solids-loadings and disk-plate gaps to produce substrates for enzymatic hydrolysis. We found that post-chemical-pretreatment size-reduction of forest biomass can decrease size-reduction energy consumption by 20-80% depending on the pretreatment applied under 20% solids-loading and a disk-plate gap of 0.76 mm in milling. SPORL with a sodium bisulfite charge of 8% and sulfuric acid charge of 2.21% on wood was the most effective in decreasing size-reduction energy consumption. Solids-loading had the most significant effect on disk-milling energy. When solids-loading was reduced from 30% to 3%, disk-milling energy could be decreased by more than a factor of 10 for wood chips pretreated by both SPORL and dilute-acid at an acid charge of 2.21%. The enzymatic hydrolysis glucose yields (EHGY) from the substrates produced by all pretreatments were independent of the solids-loading in milling, indicating that these energy savings in size-reduction can be realized without affecting EHGY. When wood chips were pretreated by SPORL with 2.21% acid charge, size-reduction energy consumption was decreased to less than 50 Wh/kg od wood at a practical solids-loading of approximately 10-20%, equivalent to that used in size-reduction of agriculture biomass, with excellent EHGY of about 370 g per kg od wood. Similar effects on size-reduction energy savings and excellent EHGY were also achieved when large disk-plate gaps (up to 1.52 mm
Evaluation of Mycorrhizal Fungi, Vermicompost and Humic Acid on Essence Yield and Root Colonization of Fennel

Directory of Open Access Journals (Sweden)

I. Akbari

2016-02-01

humic acid include: h1(no application and h2 (application. Each plot had 5 rows with row spacing of 50 cm and row length of 5 m was considered. Ten grams mycorrhizal fungi were added to the soil under each seed. Humic acid was sprayed in 3 stages (vegetative, reproductive and seed filling stage according to the recommended dose (200 mg per liter. Sampling and measuring of traits were done at the end of the season and after removal of border rows. A 50 gram sample of each plot milled and then essence collected with Clevenger for three hours using water distillation. Percent of fungal colonization obtained with Gridline Intersect Method. Finally, for analysis of data and drawing shapes, MSTAT-C software and Microsoft Excel were used. Comparison of the least significant difference test (LSD was conducted at the 5% level. Results and Discussion Results of this study showed the main effects of experimental factors on seed yield, essence percent and yield were significant. Comparison of mean results showed the highest seed yield (1119.37 kg ha-1 obtained from mycorrhizal colonization. With increasing vermicompost applying, seed yield also increased. So, the greatest and lowest seed yield obtained from 8 ton ha-1 vermicompost and control plots (1315 and 1016 kg ha-1, respectively. With humic acid foliar application, seed yield increased about 18 percent. In this experiment essence percent significantly increased due to mycorrhizal colonization. Essence percent of fennel seeds showed, the highest value of essence percent (2.83% obtained from 8 ton.ha-1 vermicompost and the lowest essence was obtained from control plots (2.15%. Seed essence percent significantly increased due to humic acid foliar application compared with control plots (2.6% and 2.4% respectively. Essence yield significantly increased due to mycorrhizal inoculation (31.67 kg ha-1. Vermicompost application increased essence yield about 64 and 25 percent compared with control plots. Compared to control, humic acid
Yield gap analysis in long-term experiments with intensive rice cultivation

International Nuclear Information System (INIS)

Laureles, E.V.; Correa, T. Jr.; Buresh, R.J.

2007-01-01

The long-term continuous cropping experiment at IRRI is cultivated with three rice crops in a year, making it the world's most intensively cropped long-term rice experiment. The availability of comprehensive rice production records, compiled weather data, and tested crop models provides a means to evaluate long-term trends in measured and potential yields and yield gaps in this rice production system. Yield trends were assessed using the highest yielding cultivar in each cropping season from 1979 to 2005. Potential yield of the highest yielding cultivar in each season was determined using three rice models (ORYZA, TERM, and CERES) run with the actual transplanting and harvest dates for the cultivar. The yield gap was determined from the difference between the simulated potential grain yield and the measured grain yield. Measured and potential yields and the yield gap varied across seasons and years. Measured yields were higher in the dry season than in the early and late wet seasons. The yield gap tended to be higher in the wet season than in the dry season. Climatic parameters, particularly solar radiation, influenced the performance of rice cultivars. The relatively larger yield gaps in the late wet season than in the dry season were associated with increased spikelet sterility. The cumulative measured yield for the three annual rice crop was near 80 percent of the annual yield potential in years with best practices for fertilizer N and crop management. The long term trends suggest that effective timing and rates of N fertilization and effective control of diseases were critical in achieving 80 percent of the annual yield potential
Evaluating Yield and Drought Stress Indices under End Season Drought Stress in Promising Genotypes of Barley

Directory of Open Access Journals (Sweden)

H. Tajalli

2012-08-01

Full Text Available To study the effects of end season drought stress on yield, yield components and drought stress indices in barley, a split plot experiment arranged in randomized complete block design with three replications was conducted at the Agricultural Research Center of Birjand in 2008-2009 crop years. Drought stress, in 2 levels, consists of control (complete irrigation and stopping irrigation at the 50% of heading stage, and 20 promising genotypes of barley were the treatments of the experiment. Results revealed that stopping irrigation lead to declining of 14.64 and 8.12 percent of seed and forage yields against control condition, respectively. Using stress susceptibility index (SSI indicated that genotypes 2, 3, 7, 9, 10 and 15; using STI and GMP indices, genotypes 5, 8, 18 and 20 using MP, genotypes 8, 18 and 20, and TOL, genotypes 2, 3, 7, 9, and 10, were the most drought tolerant genotypes. Correlation between seed yield and stress evaluation indices showed that MP, GMP and STI are the best indices to be used in selection and introducing drought tolerant genotypes of barley. Considering all indices, and given that the best genotypes are those with high yield under normal condition and minimum yield reduction under drought stress, No. 18 and 20 could be introduced as the most tolerant barley genotypes to drought.
Evaluation of Tomato Yield and Quality under Deficit Irrigation conditions and Simultaneous Application of Superabsorbent Polymer, Shading and Mulches

Directory of Open Access Journals (Sweden)

Maryam Bostani

2017-12-01

Full Text Available Introduction Drought is one of the most important environmental factors that influences yield and quality of tomato (Solanum lycopersicum Peralta & Spoonerin arid and semi-arid regions. Drought stress causes different physiological effects on plant growth. Vegetable crops are more sensitive to water shortage and any deficit in providing water requirement of plant leads to considerable reduction of yield. For future global food security, water use in agriculture must become sustainable. Agricultural water-use efficiency and water productivity can be improved by many approaches and strategies. Super absorbent polymers (SAP as a soil improvement substance, covering soil by different types of mulches and blocking a part of sun light by shading have been used effectively to increase the water use efficiency sustainability of production in agricultural systems. But, still there is a limited knowledge on interactions of SAPs, plastic mulches and shading under deficit irrigation on yield and quality of tomato. Material and Methods In order to evaluate the effects of SAP, black plastic mulches and decreasing light intensity under deficit irrigation on yield and quality of tomato ‘Early Urbana VF 132- 7171’ fruits, the current research carried out in a field experiment at department of Horticulture, Ilam University during 2014 using a 3 × 8 × 3 split plot assay based on a randomized complete block design (RCBD with two factor. The main factor was including three irrigation intervals (once after 3, 6 or 9 days equivalent to soils field capacity and sub-factor was including eight treatments viz., mulch, superabsorbent, shading, mulch + superabsorbent, mulch + shading, superabsorbent¬ + shading, mulch + shading + superabsorbent and control. Light intensity was measured by a digital exposure meter ‘Mastech MS6610’. Data were subjected to ANOVA using SAS software version 9.3. Verification of significant differences was done using Duncan's Test at 5

Preparation of Silicon by Calcium Reduction of Purified Rice Husk Ash

International Nuclear Information System (INIS)

Swe Zin Tun

2011-12-01

This research has studied on the possibility of production and preparation of silicon powder from rice husk ash (RHA) as raw material. RHA from gasifier, a waste product of the rice mill is rich in silica which contains 90.43% of silica. RHAs were purified by precipitation method using 1.5N, 2N, 2.5N and 3N of sodium hydroxide solution and 4.5N, 5N, 5.5N and 6.5N of sulphuric acid solution. The highest yield percent of silica was given by using 2.5N sodium hydroxide solution and 5N sulphuric acid solution X-ray fluoresence (XRF), X-rays diffraction (HRD) and Fourier transform infrared (FTRI) spectra were applied for determination of mineral content and chemical bonding in extracted silica and rice husk ash. Metallothermic reduction of purified extracted silica with calcium was investigated within the temperacture range of 700-900 C. The reduction product was characterized by XRD, XRF and scanning electron microcopy (SEM). The effect of temperature and reaction time in which reduction process was studied in this research.
Effect of timing and intensity of defoliation on yield and quality of sugar beet

Directory of Open Access Journals (Sweden)

ali kamandi

2009-06-01

Full Text Available The effect of defoliation on root yield and quality of suagrbeet (Beta vulgaris L. was examined in a field study in Research Station of Faculty of Agriculture, Ferdowsi University of Mashhd during 2005 growing season. The experiment was conducted as a split plot on the basis of randomized complete block design with three replications.Time of Defoliation (May 16th, May 31th, June 18th, July 9th, July 31th, and August 20th were allocated to main plots and defoliation severity (0, 30, 60, and 100% were assigned to subplots. Results showed that root yield, shoot and root dry weight and sugar yield were influenced by defoliation time. However, defoliation time had no significant effects on sugar white content and white sugar yield. Effects of defoliation on plant growth was more pronounced in mid season when about 1500 degree days was accumulated, compared to early or late season. Defoliation intensity resulted in a significant decrease in root yield, shoot fresh weigth, root and shoot dry weight, sugar and white sugar content, and white sugar yield compared with undefoliated control, but molass sugar was increased in all defoliation intensities. sugar and white suagr percent were significantly affected by defoliation time x intensity interaction. Complete defoliation (100% on July 30th and Auguat 19th led to 18 and 21% reduction in sugar and 29 and 28% in white suagar, respectively. However, 100% defoliation in July 8th resulted in 6 and 8% increase in sugar and white sugar, respectively. Keywords: Time of defoliation, defoliation intensity, sugarbeet yield,sugar beet quality.
Beyond Marbles: Percent Change and Social Justice

Science.gov (United States)

Denny, Flannery

2013-01-01

In the author's eighth year of teaching, she hit a wall teaching percent change. Percent change is one of the few calculations taught in math classes that shows up regularly in the media, and one that she often does in her head to make sense of the world around her. Despite this, she had been teaching percent change using textbook problems about…
Potential reductions of street solids and phosphorus in urban watersheds from street cleaning, Cambridge, Massachusetts, 2009-11

Science.gov (United States)

Sorenson, Jason R.

2013-01-01

Material accumulating and washing off urban street surfaces and ultimately into stormwater drainage systems represents a substantial nonpoint source of solids, phosphorus, and other constituent loading to waterways in urban areas. Cost and lack of usable space limit the type and number of structural stormwater source controls available to municipalities and other public managers. Non-structural source controls such as street cleaning are commonly used by cities and towns for construction, maintenance and aesthetics, and may reduce contaminant loading to waterways. Effectiveness of street cleaning is highly variable and potential improvements to water quality are not fully understood. In 2009, the U.S. Geological Survey, in cooperation with the Massachusetts Department of Environmental Protection, the U.S. Environmental Protection Agency, and the city of Cambridge, Massachusetts, and initiated a study to better understand the physical and chemical nature of the organic and inorganic solid material on street surfaces, evaluate the performance of a street cleaner at removing street solids, and make use of the Source Loading and Management Model (SLAMM) to estimate potential reductions in solid and phosphorus loading to the lower Charles River from various street-cleaning technologies and frequencies. Average yield of material on streets collected between May and December 2010, was determined to be about 740 pounds per curb-mile on streets in multifamily land use and about 522 pounds per curb-mile on commercial land-use streets. At the end-of-winter in March 2011, about 2,609 and 4,788 pounds per curb-mile on average were collected from streets in multifamily and commercial land-use types, respectively. About 86 percent of the total street-solid yield from multifamily and commercial land-use streets was greater than or equal to 0.125 millimeters in diameter (or very fine sand). Observations of street-solid distribution across the entire street width indicated that as
26 CFR 1.148-4 - Yield on an issue of bonds.

Science.gov (United States)

2010-04-01

... percent per year and matures on January 1, 2004. Bonds Y and Z are callable by the issuer at par plus... 26 Internal Revenue 2 2010-04-01 2010-04-01 false Yield on an issue of bonds. 1.148-4 Section 1... (CONTINUED) INCOME TAXES (CONTINUED) Tax Exemption Requirements for State and Local Bonds § 1.148-4 Yield on...
Responsiveness of cold tolerant chickpea characteristics in fall and spring planting: II. yield and yield components

Directory of Open Access Journals (Sweden)

ahmad nezami

2009-06-01

Full Text Available Previous research in Mashhad collection chickpeas (MCC has shown that there are some cold tolerant genotypes for fall planting in the highlands. To obtain more detailed information about the reaction of these genotypes to fall and spring planting, the yield and yield component responses of 33 chickpea genotypes (32 cold tolerant genotypes and one susceptible genotypes to four planting dates (28 Sep., 16 Oct., 2 Nov., and 7 Mar. were evaluated in 2000-2001 growing season. The experiment was conducted at the experimental field of college of agriculture, Ferdowsi University of Mashhad as a split plot design with two replications. The planting dates were imposed as main plot and chickpea genotypes as subplot. Effects of planting date and genotype on percent of plant survival (PPS after winter, number. of pod per plant, 100 seed weight, yield and Harvest Index (HI were significant (p
Percent Wetland Cover (Future)

Data.gov (United States)

U.S. Environmental Protection Agency — Wetlands act as filters, removing or diminishing the amount of pollutants that enter surface water. Higher values for percent of wetland cover (WETLNDSPCT) may be...
The effect of cropping sequence on the crop yield and nutrient availability

International Nuclear Information System (INIS)

Sisworo, W.H.; Rasjid, H.

1988-01-01

A two seasons field experiment was conducted to study the carry over effect of previous crop on the succeeding crop yield and plan nutrient (N and P) availability. The experiment consisted of eight treatments were arranged in a randomized block design with six resplications. Cropping sequence was studied that was soybean followed by corn and a continuous corn system. The effect of added P to the previous crops on the succeeding crops yield was also observed. Labelled fertilizer were used in the experiment to measure dinitrogen fixation of two soybean varieties and the amount of available nutrient in the soil by using isotopic dilution technique. The result obtained showed that corn yield was significantly influenced by cropping sequence, but available nutrient was not. Corn grown after soybean produced about 22 percent more grain than those of the continuous corn system. The phosphorus applied to the first season crops increased significantly the succeeding corn yield. The highest amount of accumulation in soybean was 81 kg N/h, around 40 percent of the amount was obtained through fixation. (authors). 19 refs.; 8 tabs
Experimental Observations of In-Situ Secondary Electron Yield Reduction in the PEP-II Particle Accelerator Beam Line

International Nuclear Information System (INIS)

Pivi, Mauro

2010-01-01

Beam instability caused by the electron cloud has been observed in positron and proton storage rings and it is expected to be a limiting factor in the performance of the positron Damping Ring (DR) of future Linear Colliders (LC) such as ILC and CLIC. To test a series of promising possible electron cloud mitigation techniques as surface coatings and grooves, in the Positron Low Energy Ring (LER) of the PEP-II accelerator, we have installed several test vacuum chambers including (i) a special chamber to monitor the variation of the secondary electron yield of technical surface materials and coatings under the effect of ion, electron and photon conditioning in situ in the beam line; (ii) chambers with grooves in a straight magnetic-free section; and (iii) coated chambers in a dedicated newly installed 4-magnet chicane to study mitigations in a magnetic field region. In this paper, we describe the ongoing R and D effort to mitigate the electron cloud effect for the LC damping ring, focusing on the first experimental area and on results of the reduction of the secondary electron yield due to in situ conditioning.
Reduction of UF4 to U-metal

International Nuclear Information System (INIS)

Namkung, H.; Min, B.T.; Kim, J.S.; Whang, S.C.

1982-01-01

In the second years of study for the production of the metallic uranium with reactors which can produce 1 Kg and 4 Kg U-metal, various factors on the yield of U-metal and the leaching condition for uranium recovery with nitric acid are examined. The jolter has been used for the charging with liner (MgF 2 ) while the hand-tamping method for the filling of reaction mixtures (UF 4 -Mg) in the reactor, and their average densities are 1.23g/cc and 2.90g/cc, respectively. The various effects on the yield such as magnesium excess, furnace control temperatue, charge densities of liner and reaction mixtures, have been studied but the yields of crude metal production are in the wide range from 93 % down to about 65 %. Generally, six percent magnesium excess produced higher yields than did either 2 or 10 percent excess. The leaching condition for the uranium recovery from slag are also investigated with dilute nitric acid (3-6N) as well as higher concentrated nitric acid (9.5N) but the leaching yields are same in either solution. Uranium recovery from the slag is very effective with dilute nitric acid (3N) leaching for less than one hour at 60degC. (Author)
Reduction of tobacco smoke components yield in commercial cigarette brands by addition of HUSY, NaY and Al-MCM-41 to the cigarette rod.

Science.gov (United States)

Marcilla, A; Gómez-Siurana, A; Berenguer, D; Martínez-Castellanos, I; Beltrán, M I

2015-01-01

The effect of two zeolites, HUSY, NaY and a mesoporous synthesized Al-MCM-41 material on the smoke composition of ten commercial cigarettes brands has been studied. Cigarettes were prepared by mixing the tobacco with the three powdered materials, and the smoke obtained under the ISO conditions was analyzed. Up to 32 compounds were identified and quantified in the gas fraction and 80 in the total particulate matter (TPM) condensed in the cigarettes filters and in the traps located after the mouth end of the cigarettes. Al-MCM-41 is by far the best additive, providing the highest reductions of the yield for most compounds and brands analyzed. A positive correlation was observed among the TPM and nicotine yields with the reduction obtained in nicotine, CO, and most compounds with the three additives. The amount of ashes in additive free basis increases due to the coke deposited on the solids, especially with Al-MCM-41. Nicotine is reduced with Al-MCM-41 by an average of 34.4% for the brands studied (49.5% for the brand where the major reduction was obtained and 18.5 for the brand behaving the worst). CO is reduced by an average of 18.6% (ranging from 10.3 to 35.2% in the different brands).
Impacts of aerosol pollutant mitigation on lowland rice yields in China

Science.gov (United States)

Zhang, Tianyi; Li, Tao; Yue, Xu; Yang, Xiaoguang

2017-10-01

Aerosol pollution in China is significantly altering radiative transfer processes and is thereby potentially affecting rice photosynthesis and yields. However, the response of rice photosynthesis to aerosol-induced radiative perturbations is still not well understood. Here, we employ a process-based modelling approach to simulate changes in incoming radiation (RAD) and the diffuse radiation fraction (DF) with aerosol mitigation in China and their associated impacts on rice yields. Aerosol reduction has the positive effect of increasing RAD and the negative effect of decreasing DF on rice photosynthesis and yields. In rice production areas where the average RAD during the growing season is lower than 250 W m-2, aerosol reduction is beneficial for higher rice yields, whereas in areas with RAD>250 W m-2, aerosol mitigation causes yield declines due to the associated reduction in the DF, which decreases the light use efficiency. As a net effect, rice yields were estimated to significantly increase by 0.8%-2.6% with aerosol concentrations reductions from 20 to 100%, which is lower than the estimates obtained in earlier studies that only considered the effects of RAD. This finding suggests that both RAD and DF are important processes influencing rice yields and should be incorporated into future assessments of agricultural responses to variations in aerosol-induced radiation under climate change.
Assessing the tobacco harm reduction (THR debate: a systematic review

Directory of Open Access Journals (Sweden)

Yogi Hendlin

2018-03-01

Full Text Available Background Tobacco Harm Reduction (THR has become synonymous with substituting alternative tobacco products for cigarettes. However, there exists much dissension among tobacco control professionals regarding accepting harm reduction methods prolonging nicotine addiction and profiting the tobacco, e-cigarette and pharmaceutical industries. We evaluate the influence of these industries on the academic THR literature and debate. Methods We undertook a comprehensive review of all peer-review papers published on the topic of tobacco harm reduction between 1992 and July 2016. Our initial search yielded 5,172 relevant hits, and after screening, we double-coded 1,067 full-text articles. Codes include the article's stand on THR (weakly or strongly pro-, anti-, or neutral/mixed, major themes, product type, country of author origin, article type (letter/commentary, RTC, longitudinal study, etc., journal quality, and funding source. These results were analyzed in STATA. Results Of the 498 articles we have coded so far, 379 were included. The results show that six percent of all articles are editorials, 36% letters or commentaries, and 21% are non-empirical articles while only 31% are original research and 6% reviews. Thirty-three percent of pro-THR articles disclosed some sort of industry funding. Of these, 30% were funded by the tobacco industry, 22% by the E-cigarette industry and 48% were funded by pharmaceutical industries. Conclusions The THR debate has been influenced by scientists funded by tobacco, electronic-cigarette and surprisingly pharmaceutical industries in the favor of product substitution. Moreover, the majority of this debate is occurring over 'opinion pieces' rather than on the basis of empirical research. Thus, more robust and unbiased scientific evidence is needed to evaluate these alternative products before endorsing them for the public.
A Conceptual Model for Solving Percent Problems.

Science.gov (United States)

Bennett, Albert B., Jr.; Nelson, L. Ted

1994-01-01

Presents an alternative method to teaching percent problems which uses a 10x10 grid to help students visualize percents. Offers a means of representing information and suggests different approaches for finding solutions. Includes reproducible student worksheet. (MKR)
The Algebra of the Cumulative Percent Operation.

Science.gov (United States)

Berry, Andrew J.

2002-01-01

Discusses how to help students avoid some pervasive reasoning errors in solving cumulative percent problems. Discusses the meaning of ."%+b%." the additive inverse of ."%." and other useful applications. Emphasizes the operational aspect of the cumulative percent concept. (KHR)
The Effect of Planting Pattern and Density on Yield and Yield Components of Sesame (Sesamum indicum L.

Directory of Open Access Journals (Sweden)

A Koocheki

2017-06-01

Full Text Available Introduction Crop density enhancement is a method to increase yield per unit area. The spatial distribution of plants is related to radiation absorption. Therefore, it could play an effective role in photosynthesis and yield, since Crop Growth Rate (CGR is a function of used radiation energy in photosynthesis. Totally, increasing radiation absorption efficiency and yield need sufficient leaf area and suitable distribution of leaves in canopy. Ahmad et al., (2002 planted sesame with different inter row- spacing (30, 45 and 60 cm, they reported that the maximum plant height and economic yield were obtained from inter row- spacing of 45 cm. Rahnama and Bakhshandeh (2006 planted sesame with different inter row- spacing (37.5, 50 and 60 cm and the results showed that the number of capsules per plant, seed weight as well as seed oil per plant, increased with increasing inter row- spacing. Karasan et al., (2007 reported that decreasing inter row- spacing resulted in seed yield enhancement and reduction in number of capsules per plant. Material and Methods An experiment using split-plot based on randomized complete blocks design was performed. The experiment was carried with three replications in two years (2012 and 2013 at the agricultural research station of Ferdowsi University of Mashhad. For this purpose, the main plot was the density per square meter with three levels (30, 40 and 50 plants per square meter and the sub main plot was planting pattern (rectangle, square and rhombic. The size of each plot was 2×3 meters. The distance between plots and blocks were 0.5 and 1 meter, respectively. Intra row- spacing for rectangle planting pattern for densities of 30, 40 and 50 plants per square meter was 6, 5 and 4 cm, respectively. In square and rhombic planting patterns, 2 lines was planted in each row and inter row- spacing for densities of 30, 40 and 50 plants per square meter were 18, 16 and 14 cm. economic yield measured at the end of growth season
A logging residue "yield" table for Appalachian hardwoods

Science.gov (United States)

A. Jeff Martin

1976-01-01

An equation for predicting logging-residue volume per acre for Appalachian hardwoods was developed from data collected on 20 timber sales in national forests in West Virginia and Virginia. The independent variables of type-of-cut, products removed, basal area per acre, and stand age explained 95 percent of the variation in residue volume per acre. A "yield"...
Effect of Trichoderma harzianum on Wheat (Triticum aestivum L. Grain Yield under Different Levels of Cadmium Nitrate

Directory of Open Access Journals (Sweden)

F. Taghavi Ghasemkheyli

2014-12-01

Full Text Available A pot experiment was designed to evaluate the effect of Trichoderma spp. on yield and yield components of wheat (cv. N81 under different levels of cadmium nitrate. Experiment was arranged in factorial based on completely randomized design with three replicates. Trichoderma harzianum at two levels (with and without inoculation and four levels of cadmium nitrate (0, 50, 100, 150 mg l-1 were the treatment. Results of ANOVA and mean comparisons showed that inoculation of Trichoderma increased biological yield (46% and straw yield (30% as compared to control. Cadmium pollution has led to significant decrease in harvest index, grain number per spike and partitioning coefficient up to 5, 20, 24 and 38 percent compared to control, respectively. Furthermore, cadmium and fungus interaction were significant in terms of spike number, grain weight per spike, grain yield and tolerance index. Maximum grain yield and tolerance index were recorded in Trichoderma inoculation under cadmium-free plots which nearly increased 65 and 53 percent, respectively. In conclusion, using Trichoderma under cadmium pollution could improve wheat growth, yield and tolerance index
Reduction of tobacco smoke components yield in commercial cigarette brands by addition of HUSY, NaY and Al-MCM-41 to the cigarette rod

Directory of Open Access Journals (Sweden)

A. Marcilla

2015-01-01

Full Text Available The effect of two zeolites, HUSY, NaY and a mesoporous synthesized Al-MCM-41 material on the smoke composition of ten commercial cigarettes brands has been studied. Cigarettes were prepared by mixing the tobacco with the three powdered materials, and the smoke obtained under the ISO conditions was analyzed. Up to 32 compounds were identified and quantified in the gas fraction and 80 in the total particulate matter (TPM condensed in the cigarettes filters and in the traps located after the mouth end of the cigarettes. Al-MCM-41 is by far the best additive, providing the highest reductions of the yield for most compounds and brands analyzed. A positive correlation was observed among the TPM and nicotine yields with the reduction obtained in nicotine, CO, and most compounds with the three additives. The amount of ashes in additive free basis increases due to the coke deposited on the solids, especially with Al-MCM-41. Nicotine is reduced with Al-MCM-41 by an average of 34.4% for the brands studied (49.5% for the brand where the major reduction was obtained and 18.5 for the brand behaving the worst. CO is reduced by an average of 18.6% (ranging from 10.3 to 35.2% in the different brands.
Yield Stress Reduction of Radioactive Waste Slurries by Addition of Surfactants

International Nuclear Information System (INIS)

MICHAEL, STONE

2005-01-01

The Savannah River Site (SRS) and Hanford site are in the process of stabilizing millions of gallons of radioactive waste slurries remaining from production of nuclear materials for the Department of Energy (DOE). The Defense Waste Processing Facility (DWPF) at SRS is currently vitrifying the waste in borosilicate glass while the facilities at the Hanford site are in the design/construction phase. Both processes utilize slurry-fed joule heated melters to vitrify the waste slurries. The rheological properties of the waste slurries limit the total solids content that can be processed by the remote equipment during the pretreatment and melter feed processes. The use of a surface active agent, or surfactant, to increase the solids loading that can be fed to the melters would increase melt rate by reducing the heat load on the melter required to evaporate the water in the feed. The waste slurries are non-Newtonian fluids with rheological properties that were modeled using the Bingham Plastic mod el (this model is typically used by SRNL when studying the DWPF process1).The results illustrate that altering the surface chemistry of the particulates in the waste slurries can lead to a reduction in the yield stress. Dolapix CE64 is an effective surfactant over a wide range of pH values and was effective for all simulants tested. The effectiveness of the additive increased in DWPF simulants as the concentration of the additive was increased. No maxi main effectiveness was observed. Particle size measurements indicate that the additive acted as a flocculant in the DWPF samples and as a dispersant in the RPP samples

Effect of Plant Growth Promoting Rhizobacteria (PGPR on Yield and Yield Components of Sesame (Sesamum indicum l. with Emphasize on Environmental Friendly Operations

Directory of Open Access Journals (Sweden)

P Rezvani Moghaddam

2015-07-01

Full Text Available In order to evaluate the effects of different plant growth promoting rhizobacteria (PGPR on yield and yield components of sesame, an experiment was conducted in the form of Randomized Complete Block Design with three replications at Research Station, Faculty of Agriculture, Ferdowsi University of Mashhad in year 2009. Treatments were: 1 Nitragin (containing of Azotobacter sp., Azospirillum sp. and Pseudomonas sp., 2 Nitroxin (containing of Azotobacter sp. and Azospirillum sp., 3 Super nitro plus (containing of Azospirillum sp., Bacillus sp. and Pseudomonas sp., 4 Phosphate suloblizing bacteria (containing of Bacillus sp. and Pseudomonas sp., 5 Bio Phosphate (containing of Bacillus sp. and Pseudomonas sp., 6 Nitroxin + Phosphate suloblizing bacteria, 7 Nitroxin + Bio Phosphate and control. The results showed that seed yield affected by PGPR and Nitroxin + Phosphate suloblizing bacteria treatment had superior effect on seed yield compared to other treatments. Superior effect of Nitroxin + Phosphate suloblizing bacteria treatment also was shown on plant seed weight and harvest index. Nitragin, Nitroxin + Bio Phosphate, Nitroxin + Phosphate suloblizing bacteria, Bio Phosphate, Phosphate suloblizing bacteria, Nitroxin treatments increased dry weight of capsules per plant of 62, 53, 51, 36 and 30 percent compared to control, respectively. Although, the effect of PGPR was not significant on sesame seed oil content but Bio Phosphate and Nitragin treatments increased seed oil content by 1 and 1.5 percent, respectively. In general, results showed utilization of PGPR can improve seed yield and seed oil content, which can decrease dependence of sesame seed production to chemical fertilizer, decrease negative environmental impacts and as an ecofriendly inputs can help to produce crops and sustainable agriculture guidlines.
Effects of Planting Date and Weeding Regimes on Growth and Yield ...

African Journals Online (AJOL)

acer

the top thirteen oil seed crops, which make up to ... medicine (blood pressure, stress and tension). Also, Irvine (1970) ... high percent of blossoms, better pod set and pod yield with .... essential nutrients, water below the soil and for light and ...
Study of Irrigation Interval and Mulch Effects on Pomological Characteristics and Yield of Sevillana Cultivar in Field Condition

Directory of Open Access Journals (Sweden)

rahmatollah gholami

2018-03-01

Full Text Available Introduction: Olive (Olea europaea L. is one of the drought tolerant ever green fruit trees. Olive is an economically important species of the Mediterranean area, so understanding the mechanisms by which olive plants face drought stress under environmental conditions is essential for the improvement of olive yield and oil quality. Olive is one of the fruit trees which become important in the Iranian fruit industry at the near future. Mulch is an optimizing strategy under which crops are allowed to sustain some degree of water deficit and yield reduction. Increasing crop water-use efficiency (WUE through water conservation in the soil is an important component of dry land farming. Mulching is among the water management practices for increasing WUE. Mulch is referred to as any material that is spread onto the surface of the soil for protection against solar radiation or evaporation. Different materials, such as wheat straw, rice straw, plastic film, grass, wood, and sand, are used as mulches. Materials and Methods: This experiment was conducted to study the effect of irrigation interval and mulch on Pomological characteristics and yield of 11-years old Sevillana olive cultivar. A factorial experiment was carried out in Dallaho Olive Research Station at Sarepole located in Kermanshah province. Field experiment based on randomized complete block design with three replications and two factors (irrigation interval and mulch were conducted in 2015. Each experiment unit consists of 4 trees and 108 trees were used. Irrigation treatments period for experiment were 3, 6 and 10 days interval and mulch treatments for experiment were polyethylene, organic materials and non-mulch (control. Geographical characters was longitude of 45˚, 51΄ E and latitude of 34˚, 30΄ N and the height of sea level 581m. The measured tree characteristics were: Fruit Weight, Pulp Fresh Weight, Pulp Dry Weight, Dry matter, Pulp/Pit ratio, Pit Length, Pit Diameter, Fruit Yield
Determination of percent calcium carbonate in calcium chromate

International Nuclear Information System (INIS)

Middleton, H.W.

1979-01-01

The precision, accuracy and reliability of the macro-combustion method is superior to the Knorr alkalimetric method, and it is faster. It also significantly reduces the calcium chromate waste accrual problem. The macro-combustion method has been adopted as the official method for determination of percent calcium carbonate in thermal battery grade anhydrous calcium chromate and percent calcium carbonate in quicklime used in the production of calcium chromate. The apparatus and procedure can be used to measure the percent carbonate in inorganic materials other than calcium chromate. With simple modifications in the basic apparatus and procedure, the percent carbon and hydrogen can be measured in many organic material, including polymers and polymeric formulations. 5 figures, 5 tables
Nitrogen and Sulphur Relations in Effecting Yield and Quality of Cereals and Oilseed Crops

Directory of Open Access Journals (Sweden)

B.K. Nad

2001-01-01

Full Text Available Nitrogen and sulphur, both vital structural elements, are especially needed for the synthesis of proteins and oils. Investigations revealed the required application of sulphur is one half to one third the amount of nitrogen, and the ratio becomes narrower in mustard (Brassica juncea L., followed by wheat and rice. The efficiency of an increased level of nitrogen required a proportionately higher amount of sulphur. A critical investigation on the effective utilization of applied vis-à-vis absorbed nitrogen in wheat and mustard envisaged accumulation of NO3-N in vegetative parts when sulphur remained proportionately low. Application of sulphur hastened the chemical reduction of absorbed NO3– for its effective utilization. The effect was more pronounced in mustard than in wheat. Easily available forms of sulphur, like ammonium sulphate and gypsum, as compared to pyrite or elemental sulphur, maintained adequate N to S ratio in rice, resulting in a reduction in the percent of unfilled grain, a major consideration in rice yield. A narrow N to S ratio, with both at higher levels, increased the oil content but raised the saponification value of the oil, a measure of free fatty acids. Whereas, a proportionately narrow N to S ratio at moderate dose resulted in adequately higher seed and oil yield with relatively low saponification value, associated with increased iodine value of the oil, indicating respectively low free fatty acids and higher proportion of unsaturated fatty acids, an index for better quality of the oil.
Process energy reduction

International Nuclear Information System (INIS)

Lowthian, W.E.

1993-01-01

Process Energy Reduction (PER) is a demand-side energy reduction approach which complements and often supplants other traditional energy reduction methods such as conservation and heat recovery. Because the application of PER is less obvious than the traditional methods, it takes some time to learn the steps as well as practice to become proficient in its use. However, the benefit is significant, often far outweighing the traditional energy reduction approaches. Furthermore, the method usually results in a better process having less waste and pollution along with improved yields, increased capacity, and lower operating costs
Effect of Nitrogen Foliar Application on Canola Yield (Brassica napus L. and Nitrogen Efficiency across Different Sowing Dates

Directory of Open Access Journals (Sweden)

S Doori

2016-12-01

Full Text Available Introduction Between oil seeds, from the quality, quantity and nutrition index point of view, canola has the top level . Because of the solubility of N fertilizers, the time of urea application, is very important and one of the main reasons of the reduction in N application efficiency is utilization of urea in an inappropriate time. By precisely foliar application of nitrogen, the efficiency of nitrogen transformation to the grain will be very high because in this method the leaf is considered the main organ of nitrogen uptake and a low amount of absorbed nitrogen was transferred to the root and entered the soil. The more division of N application in growth stages and in accordance with plant need and foliar application result in increasing nitrogen use efficiency. The delay in sowing will result in the reduction of yield and this is due to low LAI, and thus low radiation absorb in vegetable phase and shorter reproductive phase with high temperature in flowering and subsequent stages that result in low prolific silique and make disorder in transferring stored material to grain. In this experiment using N foliar application to decrease the adverse effect of delay in sowing is objective. Materials and Methods The experiment was conducted in 2013-2014 in Ramin Agriculture and Natural Resource University of Khuzestan. Experiment was conducted as split plots in a randomized complete blocks design with three replications. In this experiment sowing date]optimum sowing (27 November, 17 December and late sowing (30 December [were assigned to main plots and several time of N-foliar application with 5 percent density from urea (20 liter per ha, ]TO (control, T1 (foliar N application in rosette stage, T2 (foliar N application in budding stage, T3 (foliar N application in flowering stage[ were placed in sub-plots in randomized way. Fertilizing was based on the results of soil examination. Therefore, 162 kg ha-1 of pure nitrogen (from resource urea in the way
Simulating the potential yield and yield gaps of sugar beet due to water and nitrogen limitations in Khorasan province using SUCROS model

Directory of Open Access Journals (Sweden)

R Deihimfard

2015-12-01

Full Text Available Introduction Crop productivity is highly constrained by water and nitrogen limitations in many areas of the world (Kalra et al., 2007. Therefore, there is a need to investigate more on nitrogen and water management to achieve higher production as well as quality. Irrigated sugar beet in the cropping systems of Khorasan province in northeastern of Iran accounts for about 34% of the land area under sugar beet production (~115,000 ha with an average yield of around 36 t.ha-1 (Anonymous, 2009. However, there is a huge yield gap (the difference between potential and water and nitrogen-limited yield mainly due to biotic and abiotic factors causing major reduction in farmers’ yield. Accordingly, yield gap analysis should be carried out to reduce the yield reduction and reach the farmer’s yield to the potential yield. The current study aimed to simulate potential yield as well as yield gap related to water and nitrogen shortage in the major sugar beet-growing areas of Khorasan province of Iran. Materials and methods This study was carried out in 6 locations across Khorasan province, which is located in the northeast of Iran. Long term weather data for 1986 to 2009 were obtained from Iran Meteorological Organization for 6 selected locations. The weather data included daily sunshine hours (h, daily maximum and minimum temperatures (◦C, and daily rainfall (mm. Daily solar radiation was estimated using the Goudriaan (1993 method. The validated SUCROSBEET model (Deihimfard, 2011; Deihimfard et al., 2011 was then used to estimate potential, water and nitrogen-limited yield and yield gap of sugar beet for 6 selected locations across the Khorasan province in the northeast of Iran. This model simulates the impacts of weather, genotype and management factors on crop growth and development, soil water and nitrogen balance on a daily basis and finally it predicts crop yield. The model requires input data, including local weather and soil conditions, cultivar
Uranium tetrafluoride reduction closed bomb. Part I: Reduction process general conditions

International Nuclear Information System (INIS)

Anca Abati, R.; Lopez Rodriguez, M.

1961-01-01

General conditions about the metallo thermic reduction in small bombs (250 and 800 gr. of uranium) has been investigated. Factors such as kind and granulometry of the magnesium used, magnesium excess and preheating temperature, which affect yields and metal quality have been considered. magnesium excess increased yields in a 15% in the small bomb, about the preheating temperature, there is a range between which yields and metal quality does not change. All tests have been made with graphite linings. (Author) 18 refs
Metallothermic reduction of molybdate

International Nuclear Information System (INIS)

Mukherjee, T.K.; Bose, D.K.

1987-01-01

This paper gives a brief account of the investigations conducted so far on metallothermic reduction of high grade molybdenite with particular emphasis on the work carried out in Bhabha Atomic Research Centre. Based on thermochemical considerations, the paper first introduces a number of metallic reductants suitable for use in metallothermic reduction of molybdenite. Aluminium, sodium and tin are found to be suitable reducing agents and very rightly they have found most applications in the research and development efforts on metallothermic reduction of molybdenite. The reduction with tin was conducted on fairly large scale both in vacuum and hydrogen atmosphere. The reaction was reported to be invariant depending mainly on the reduction temperature and a temperature of the order of 1250deg to 1300degC was required for good metal recovery. In comparison to tin, aluminothermic reduction of molybdenite was studied more extensively and it was conducted in closed bomb, vacuum and also in open atmosphere. In aluminothermic reduction, the influence of amount of reducing agent, amount of heat booster, preheating temperature and charging procedure on these metal yield was studied in detail. The reduction generally yielded massive molybdenum metal contaminated with aluminium as the major impurity element. Efforts were made to purify the reduced metal by arc melting, electron beam melting and molten salt electrorefining. 9 refs. (author)
Yield Behavior of Solution Treated and Aged Ti-6Al-4V

Science.gov (United States)

Ring, Andrew J.; Baker, Eric H.; Salem, Jonathan A.; Thesken, John C.

2014-01-01

Post yield uniaxial tension-compression tests were run on a solution treated and aged (STA), titanium 6-percent aluminum 4-percent vanadium (Ti-6Al-4V) alloy to determine the yield behavior on load reversal. The material exhibits plastic behavior almost immediately on load reversal implying a strong Bauschinger effect. The resultant stress-strain data was compared to a 1D mechanics model and a finite element model used to design a composite overwrapped pressure vessel (COPV). Although the models and experimental data compare well for the initial loading and unloading in the tensile regime, agreement is lost in the compressive regime due to the Bauschinger effect and the assumption of perfect plasticity. The test data presented here are being used to develop more accurate cyclic hardening constitutive models for future finite element design analysis of COPVs.
Ultralow Level Mercury Treatment Using Chemical Reduction and Air Stripping: Scoping Report

International Nuclear Information System (INIS)

Looney, B.B.

2000-01-01

Data collected during the first stage of a Savannah River Technology Center (SRTC) Strategic Research and Development Project confirmed the efficacy of chemical reduction and air stripping/sparging as an ultralow level mercury treatment concept for waters containing Hg(II). The process consists of dosing the water with low levels of stannous chloride to convert the mercury to Hg. This form of mercury can easily be removed from the water by air stripping or sparging. Samples of Savannah River Site (SRS) groundwater containing approximately 130 ng/L of total mercury (as Hg(II)) were used for the study. In undosed samples, sparging removed 0 percent of the initial mercury. In the dosed samples, all of the removals were greater than 94 percent, except in one water type at one dose. This sample, which was saturated with dissolved oxygen, showed a 63 percent reduction in mercury following treatment at the lowest dose. Following dosing at minimally effective levels and sparging, treated water contained less than 10 ng/L total mercury. In general, the data indicate that the reduction of mercury is highly favored and that stannous chloride reagent efficiently targets the Hg(II) contaminant in the presence of competing reactions. Based on the results, the authors estimated that the costs of implementing and operating an ultralow level mercury treatment process based on chemical reduction and stripping/sparging are 10 percent to 20 percent of traditional treatment technologies
Using historical wafermap data for automated yield analysis

International Nuclear Information System (INIS)

Tobin, K.W.; Karnowski, T.P.; Gleason, S.S.; Jensen, D.; Lakhani, F.

1999-01-01

To be productive and profitable in a modern semiconductor fabrication environment, large amounts of manufacturing data must be collected, analyzed, and maintained. This includes data collected from in- and off-line wafer inspection systems and from the process equipment itself. This data is increasingly being used to design new processes, control and maintain tools, and to provide the information needed for rapid yield learning and prediction. Because of increasing device complexity, the amount of data being generated is outstripping the yield engineer close-quote s ability to effectively monitor and correct unexpected trends and excursions. The 1997 SIA National Technology Roadmap for Semiconductors highlights a need to address these issues through open-quotes automated data reduction algorithms to source defects from multiple data sources and to reduce defect sourcing time.close quotes SEMATECH and the Oak Ridge National Laboratory have been developing new strategies and technologies for providing the yield engineer with higher levels of assisted data reduction for the purpose of automated yield analysis. In this article, we will discuss the current state of the art and trends in yield management automation. copyright 1999 American Vacuum Society
Relation of watershed setting and stream nutrient yields at selected sites in central and eastern North Carolina, 1997-2008

Science.gov (United States)

Harden, Stephen L.; Cuffney, Thomas F.; Terziotti, Silvia; Kolb, Katharine R.

2013-01-01

Data collected between 1997 and 2008 at 48 stream sites were used to characterize relations between watershed settings and stream nutrient yields throughout central and eastern North Carolina. The focus of the investigation was to identify environmental variables in watersheds that influence nutrient export for supporting the development and prioritization of management strategies for restoring nutrient-impaired streams. Nutrient concentration data and streamflow data compiled for the 1997 to 2008 study period were used to compute stream yields of nitrate, total nitrogen (N), and total phosphorus (P) for each study site. Compiled environmental data (including variables for land cover, hydrologic soil groups, base-flow index, streams, wastewater treatment facilities, and concentrated animal feeding operations) were used to characterize the watershed settings for the study sites. Data for the environmental variables were analyzed in combination with the stream nutrient yields to explore relations based on watershed characteristics and to evaluate whether particular variables were useful indicators of watersheds having relatively higher or lower potential for exporting nutrients. Data evaluations included an examination of median annual nutrient yields based on a watershed land-use classification scheme developed as part of the study. An initial examination of the data indicated that the highest median annual nutrient yields occurred at both agricultural and urban sites, especially for urban sites having large percentages of point-source flow contributions to the streams. The results of statistical testing identified significant differences in annual nutrient yields when sites were analyzed on the basis of watershed land-use category. When statistical differences in median annual yields were noted, the results for nitrate, total N, and total P were similar in that highly urbanized watersheds (greater than 30 percent developed land use) and (or) watersheds with greater
26 CFR 301.6226(b)-1 - 5-percent group.

Science.gov (United States)

2010-04-01

... 26 Internal Revenue 18 2010-04-01 2010-04-01 false 5-percent group. 301.6226(b)-1 Section 301.6226... ADMINISTRATION PROCEDURE AND ADMINISTRATION Assessment In General § 301.6226(b)-1 5-percent group. (a) In general. All members of a 5-percent group shall join in filing any petition for judicial review. The...
Yields of correlated fragment pairs and neutron multiplicity in spontaneous fission of {sup 242}Pu

Energy Technology Data Exchange (ETDEWEB)

Veselsky, M.; Kliman, J.; Morhaccaron, M. [Institute of Physics of Slovak Academy of Sciences, Dubravska 9, 84228 Bratislava (Slovakia); Ramayya, A.V.; Kormicki, J.; Daniel, A.V. [Physics Department, Vanderbilt University, Nashville (United States)] Rasmussen, J.O. [Lawrence Berkeley National Laboratory, Berkeley (United States)] Stoyer, M.A. [Lawrence Livermore National Laboratory, Livermore (United States); Daniel, A.V.; Popeko, G.S.; Oganessian, Yu. Ts. [Joint Institute for Nuclear Research, Dubna (Russia)] Greiner, W. [Institut fur Theoretische Physik, J. W. Goethe Universitaet, Frankfurt a. M. (Germany); Aryaeinejad, R. [Idaho National Engineering Laboratory, Idaho Falls (United States)

1998-10-01

Yields of correlated fragment pairs were obtained in spontaneous fission of {sup 242}Pu. Charge, mass and neutron multiplicity distributions of fragment pairs were determined and compared to available data. The yield of cold fission without neutron emission was determined to about 10{percent} for the set of observed correlated fragment pairs. {copyright} {ital 1998 American Institute of Physics.}
20 percent more yield; 20 Prozent mehr Ertrag

Energy Technology Data Exchange (ETDEWEB)

Anon.

2013-06-15

Interview with Tino Weber, director of Schmack Biogas GmbH, about the opportunities and prospects of bioenergy use by new concepts. [German] Interview mit Tino Weber, Geschaeftsfuehrer der Schmack Biogas GmbH, ueber Chancen und Perspektiven der Bioenergie durch neue Nutzungskonzepte.
Hot spots of wheat yield decline with rising temperatures.

Science.gov (United States)

Asseng, Senthold; Cammarano, Davide; Basso, Bruno; Chung, Uran; Alderman, Phillip D; Sonder, Kai; Reynolds, Matthew; Lobell, David B

2017-06-01

Many of the irrigated spring wheat regions in the world are also regions with high poverty. The impacts of temperature increase on wheat yield in regions of high poverty are uncertain. A grain yield-temperature response function combined with a quantification of model uncertainty was constructed using a multimodel ensemble from two key irrigated spring wheat areas (India and Sudan) and applied to all irrigated spring wheat regions in the world. Southern Indian and southern Pakistani wheat-growing regions with large yield reductions from increasing temperatures coincided with high poverty headcounts, indicating these areas as future food security 'hot spots'. The multimodel simulations produced a linear absolute decline of yields with increasing temperature, with uncertainty varying with reference temperature at a location. As a consequence of the linear absolute yield decline, the relative yield reductions are larger in low-yielding environments (e.g., high reference temperature areas in southern India, southern Pakistan and all Sudan wheat-growing regions) and farmers in these regions will be hit hardest by increasing temperatures. However, as absolute yield declines are about the same in low- and high-yielding regions, the contributed deficit to national production caused by increasing temperatures is higher in high-yielding environments (e.g., northern India) because these environments contribute more to national wheat production. Although Sudan could potentially grow more wheat if irrigation is available, grain yields would be low due to high reference temperatures, with future increases in temperature further limiting production. © 2016 John Wiley & Sons Ltd.
Improvement of Soybean (Glycine max L. Yield with Urea Foliar Application at Growth Stages

Directory of Open Access Journals (Sweden)

Mahmood Tohidi

2017-07-01

Full Text Available To investigate the effects of nitrogen foliar application at different growth stages of soybean on the yield and yield components this experiment was performed in Shush, north of Khuzestan, Iran, during growing season of 2014. The experiment was in split plot based on randomized complete block design with three replications. Experimental treatments consisted of four levels of nitrogen fertilizer foliar applications as control (no nitrogen foliar application, 25, 50 and 75 kg/ha pure nitrogen from urea source (46% pure nitrogen assigned to the main plots and spraying times in three levels, at vegetative stage, flowering stage and podding stage to the subplots. Results showed that the effects of nitrogen foliar application on traits measured in this experiment like leaf area index, number of pod per plant, number of seeds per pod, thousand seed weight, seed yield, biologic yield, harvest index, protein percent and protein yield and also interaction of different levels of nitrogen foliar application and different growth stages, were significant. Oil percent and yield were only significant under the effect of nitrogen foliar application treatments at different growth stages while the interaction of different levels of nitrogen foliar application and different growth stages, were not significant. In this experiment nitrogen foliar application increased seed yield. The highest seed yield amounted to 2466 kg/ha when 50kg/ha of foliar nitrogen applied at vegetative growth stage and lowest seed yield amounted to 1295 kg/ha in the control treatment at the stage of podding. In general, results demonstrated that 50 kg/ha treatment could be considered as the best management option of nitrogen foliar application for soybean at vegetative growth stage.
Strategy for continuous improvement in IC manufacturability, yield, and reliability

Science.gov (United States)

Dreier, Dean J.; Berry, Mark; Schani, Phil; Phillips, Michael; Steinberg, Joe; DePinto, Gary

1993-01-01

Continual improvements in yield, reliability and manufacturability measure a fab and ultimately result in Total Customer Satisfaction. A new organizational and technical methodology for continuous defect reduction has been established in a formal feedback loop, which relies on yield and reliability, failed bit map analysis, analytical tools, inline monitoring, cross functional teams and a defect engineering group. The strategy requires the fastest detection, identification and implementation of possible corrective actions. Feedback cycle time is minimized at all points to improve yield and reliability and reduce costs, essential for competitiveness in the memory business. Payoff was a 9.4X reduction in defectivity and a 6.2X improvement in reliability of 256 K fast SRAMs over 20 months.

Reductions in India's crop yield due to ozone

Science.gov (United States)

Ghude, Sachin D.; Jena, Chinmay; Chate, D. M.; Beig, G.; Pfister, G. G.; Kumar, Rajesh; Ramanathan, V.

2014-08-01

This bottom-up modeling study, supported by emission inventories and crop production, simulates ozone on local to regional scales. It quantifies, for the first time, potential impact of ozone on district-wise cotton, soybeans, rice, and wheat crops in India for the first decade of the 21st century. Wheat is the most impacted crop with losses of 3.5 ± 0.8 million tons (Mt), followed by rice at 2.1 ± 0.8 Mt, with the losses concentrated in central and north India. On the national scale, this loss is about 9.2% of the cereals required every year (61.2 Mt) under the provision of the recently implemented National Food Security Bill (in 2013) by the Government of India. The nationally aggregated yield loss is sufficient to feed about 94 million people living below poverty line in India.
Calculation of the increment reduction in spruce stands by charcoal smoke

Energy Technology Data Exchange (ETDEWEB)

Guede, J

1954-01-01

Chronic damage to spruce trees by charcoal smoke, often hardly noticeable from outward appearance but causing marked reductions of wood increment can be determined by means of a calculation by increment cores. Sulfurous acid anhydride causes the closure of the stomates of needles by which the circulation of water is checked. The assimilation and the wood increment are reduced. The cores are taken from uninjured trees belonging to the dominant class. These trees are liable to irregular variations in the trend of growth only by atmospheric influences and disturbances in the circulation of water. The decrease of increment of a stand can be judged by the trend of growth of the basal area of sample trees. Two methods are applied: in the first method, the difference between the mean total increment before the damage has been caused and that after it is calculated by the yield table in deriving the site quality classes from the basal area growth of dominant stems. This is possible by using the mean diameter of each age class and the frequency curve of basal area for each site class. In the other method, the reduction of basal area increment of sample trees is measured directly. The total reduction of a stand can be judged by the share of the dominant class of stem in the total current growth of the basal area of a sound stand and by the percent of reduction of the sample trees.
Catalyst for reduction of nitrogen oxides

Science.gov (United States)

Ott, Kevin C.

2010-04-06

A Selective Catalytic Reduction (SCR) catalyst was prepared by slurry coating ZSM-5 zeolite onto a cordierite monolith, then subliming an iron salt onto the zeolite, calcining the monolith, and then dipping the monolith either into an aqueous solution of manganese nitrate and cerium nitrate and then calcining, or by similar treatment with separate solutions of manganese nitrate and cerium nitrate. The supported catalyst containing iron, manganese, and cerium showed 80 percent conversion at 113 degrees Celsius of a feed gas containing nitrogen oxides having 4 parts NO to one part NO.sub.2, about one equivalent ammonia, and excess oxygen; conversion improved to 94 percent at 147 degrees Celsius. N.sub.2O was not detected (detection limit: 0.6 percent N.sub.2O).
26 CFR 1.148-5 - Yield and valuation of investments.

Science.gov (United States)

2010-04-01

... directly or indirectly affect the yield or the cost of the investment. (3) The bid specifications include a... widely held commingled fund in which no investor in the fund owns more than 10 percent of the beneficial... periods ending June 30 and December 31), the fund had a daily average of more than 15 investors that were...
The relationships between percent body fat and other ...

African Journals Online (AJOL)

The relationships between percent body fat and other anthropometric nutritional predictors among male and female children in Nigeria. ... A weak significant positive correlation was observed between the percent body fat and height – armspan ratio ... There was evidence of overweight and obesity in both children. The mid ...
The effect of baking soda/hydrogen peroxide dentifrice (Mentadent) and a 0.12 percent chlorhexidine gluconate mouthrinse (Peridex) in reducing gingival bleeding.

Science.gov (United States)

Taller, S H

1993-01-01

The purpose of this study was to determine the effectiveness of a baking soda/hydrogen peroxide dentifrice, Mentadent, and a 0.12 percent chlorhexidine gluconate mouthrinse, Peridex, in reducing gingival bleeding. Forty subjects were divided into three groups; the baking soda group, the chlorhexidine group and the control group. All groups received oral hygiene instruction and brushed and flossed three times per day. Bleeding point scores were evaluated at baseline and at five weeks. The baking soda/hydrogen peroxide group used the supplied dentifrice as their sole toothpaste. The 0.12 percent chlorhexidine group used the mouthrinse twice per day. The control group performed oral hygiene as instructed. At five weeks, the 0.12 percent chlorhexidine mouthrinse significantly reduced gingival bleeding. The dentifrice and control groups revealed no statistically significant reductions. The results indicate that the 0.12 percent chlorhexidine mouthrinse is useful in improving oral health, whereas the baking soda/hydrogen peroxide dentifrice offered no advantages to conventional oral hygiene.
Effect Mycorrhizal Fungi on Reduction of Drought Stress Effect in Some Growth Traits of Sesame (Sesamum indicum L. Genotypes

Directory of Open Access Journals (Sweden)

esmaeel gholinezhad

2018-02-01

and LAR decreased significantly. Severe drought stress reduced RWC, LAI and LAR about 30 and 75 and 50 percent, respectively. The reason of LAI reduction in drought stress conditions was due to decreasing cellular turgecense and falling leaves at the onset of reproductive growth stage. By inoculation with mycorrhizal fungi species Glomus mosseae and Glomus intraradices in compare to non-inoculation, seed yield improved about 33 and 11 percent, respectively. It may be due to the effects of mycorrhizae on absorption of phosphorus and sulfur, lasting more leaves on the plant, maintaining and increasing the leaf size and improving the photosynthesis by more chlorophylls. Mycorrhizae application caused an increase in seed yield and improvement of physiological traits in compare to no inoculation (control. Among different sesame landraces studied in this research, Moghan and Zanjan Tarom landraces showed a superiority in seed yield, LAI, RWC, LWR and the first lateral stem above ground in compare to other landraces. It was also found that a significant proportion of seed yield reduction caused by drought stress was due to deterioration of physiological traits studied in this study. Conclusion The results showed that increasing LAI caused more absorption of light and ultimately seed yield incensement. Among different sesame landraces studied in this research, Moghan and Zanjan Tarom landrace showed a superiority in yield and physiological indices in compare to other landraces. Also it was found that a significant proportion of yield reduction caused by drought stress was due to deterioration of physiological indices studied in this study. Based on the results of this study, application of Mycorrhizae species, especially G. mosseae, is recommended as an effective approach for increasing seed yield and improvement physiological traits in sesame.
Evaluation of Yield and Yield Components of Some Pinto bean (Phaseolus vulgaris L. Genotypes under Late Season Water Deficit Conditions

Directory of Open Access Journals (Sweden)

somayyeh soheili movahhed

2017-10-01

indicated that Ks21189 genotype showed maximum number of pod perplant (9.2, number of grain per pod (2.91, 100 grain weight, grain yield (741.6 Kg.Ha-1, biological yield (2857 Kg.Ha-1 and Harvest Index (27.31% under drought stress conditions. In addition, this genotype had the least reduction for all traits under water limitation conditions in comparison to control. These findings confirm the resistance of Ks21189 genotype to drought stress and stimulating this genotype to least reduction in Grain yield under water limitation conditions. Minimum number of pod per plant (4.52, number of grain per pod (1.62, grain yield (503.1 Kg.Ha-1, biological yield (2301.6 Kg.Ha-1 and Harvest Index (22.66% was obtained in sadri genotype under drought conditions. Sadri genotype was identified as water deficit stress sensitive genotypes with reduction of yield up to 80.18%. In all genotypes, water deficit stress reduced grain yield due to reduced yield components (number of pod per plant, number of grain per pod and 100 grain weight. Conclusion The results of this experiment showed that water deficit stress on yield and yield components of bean genotypes had a negative effect. The highest and lowest yield and yield components were obtained from normal irrigation and drought stress treatments, respectively. Ks21189 genotype was more stable in water deficit treatment than other genotypes; however grain yield reduce in normal irrigation treatment was lower than other genotypes. Therefore, it seems that this genotype can be used as an appropriate genotype for supplemental evaluation in water deficit stress conditions. Correlation analysis showed significant and positive correlation between biological yield, number of pods per plant, number of grains per pod with grain yield. We concluded that genotypes with higher biological yield under drought stress conditions can produce maximum number of pods per plant, number of grains per pod and grain yield. Acknowledgments We would like to express our
Evaluation of veneer yields and grades from yellow-poplar, white oak, and sweetgum from the southeast

Science.gov (United States)

Robert H. McAlister

1980-01-01

Dry volume yields and standard grades of veneer are given for yellow-poplar, sweetgum, and white oak by tree diameter and location within the stem. Results show that the typical stands of mixed southern pine and hardwood timer yield enough veneer to utilize almost 90 percent of the stand volume in the production of COM-PLY lumber and panels
Soil erosion planning using sediment yield index method in the Nun Nadi watershed, India

Directory of Open Access Journals (Sweden)

Hasan Raja Naqvi

2015-06-01

Full Text Available The study identifies the extent of soil loss and proposes a method for prioritization of micro-watershed in the Nun Nadi watershed. The study used the Sediment Yield Index (SYI method, based on weighted overlays of soil, topography, rainfall erosivity and land use parameters in 24 micro watersheds. Accordingly the values and thematic layers were integrated as per the SYI model, and minimum and maximum sediment yield values were calculated. The priority ranks as per the sediment yield values were assigned to all micro-watersheds. Then the values were classified into four priority zones according to their composite scores. Almost 14 percent area of three micro-watersheds (SW5b, SW6a and SW7b showed very high priority; approximately 30.57 percent of the study area fell under the high priority zones. These areas require immediate attention. Conservation methods are suggested, and the locations of check dams are proposed after considering drainage, slope and soil loss. Keywords: Check dam, Prioritization, Nun Nadi watershed, Soil loss, SYI
A new method for the simultaneous enhancement of methane yield and reduction of hydrogen sulfide production in the anaerobic digestion of waste activated sludge.

Science.gov (United States)

Dai, Xiaohu; Hu, Chongliang; Zhang, Dong; Chen, Yinguang

2017-11-01

The biogas generated from anaerobic digestion (AD) also includes undesirable by-product such as hydrogen sulfide (H 2 S), which must be removed before the biogas can be used as a clean energy source. Therefore, it is necessary to find an appropriate strategy to simultaneously enhance the methane yield and reduce H 2 S production. An efficient strategy-pretreating sludge at pH 10 for 8d and adjusting the system at neutral pH to produce methane for 20d-is reported for the synchronous enhancement of methane production and reduction of H 2 S production during AD. The experimental results showed that the cumulative methane yield was 861.2±6.1mL/g volatile solids (VS) of sludge pretreated at pH 10 in semi-continuous stirred anaerobic reactors for 84d, an increase of 49.6% over the yield in the control. Meanwhile, the cumulative production of H 2 S was 144.1×10 -4 mL/g VS, 54.2% lower than that in the control. Copyright © 2017 Elsevier Ltd. All rights reserved.
Effect of Organic Manure Mixture on growth and yield of Radish (RaphanusSativus L

Directory of Open Access Journals (Sweden)

M. Etesami

2016-02-01

Full Text Available Introduction: Today, production of organic farming and gardening is rising. The use of organic fertilizers such as animal manure has a long history. In recent years, the use of fertilizers and manure for providing the nutritional needs of plants, improve soil physical and chemical structure and reduce the environmental issues have been observed. Animal manures can increase soil organic matter and nutrients, improve soil structure and water-holding capacity which in turn increase the quality and quantity of the product to follow. Manure is a valuable source of biological, ecological and environmental benefits is positive and its main use is for agricultural use. Radish is an important root vegetable that belongs to the cruciferous (Brassicaceae. Value radish on high levels of dietary is related to soluble fiber and antioxidants. Radish is a native plant to Asia, China and Europe. The oral part of the botanical garden radish is important and that kind of traditional varieties have long hypocotyls include root and hypocotyls made.The purpose of this test is to evaluate the different mixture amount of animal fertilizers on the growth and yield of radish plants and compare them to each other. Materials and Methods: In order to study of different manure effect on radish growth and yield, an experiment carried out in 2012-2013 in the greenhouse of Gonbad- Kavos University with geographical characteristics 37.16 degrees north, 55.12 ° east and with a height of 45 meters above sea level in a completely randomized design with four replications. Soil and fertilizers used to this experiment were made of the soil and livestock of Gonbad- Kavos University. Soil texture was Clay loam and pH was 7.7 obtained from soil analysis. To obtain the required levels of fertilizer treatments (25, 50, 75, 100, a measure was considered as the basis of each treatment on the basis of the ratio were calculated. The treatments included control (soil, 25 percent cow manure+ 75
Influence of evenness of poultry manure application on grain crops productivity

Directory of Open Access Journals (Sweden)

T. Yu. Anisimova

2015-01-01

Full Text Available Possibility of increase of efficiency of poultry manure application due to more evenness of fertilizer application into the soil was investigated. Machines with a wide range of regulation of an application rate, for example ROU-6 with interval from 4 to 80 t/ha are for this purpose necessary. Efficiency of poultry manure application for grain crops was increased due to using of machines of drum type with optimum doses fertilizing (12-16 t/ha. An assessment of efficiency was carried out. The drums rotation speed, shovel quantity and shape, their installation angle and a design of the directing board were determined. The developed modified working of a spreader of drum type allowed to reduce unevenness of width fertilizing by 12-14 percent, on length of unit pass - by 5 percent. It was established that if the dose increases more than 8 t/ha, the crop productivity growths not significant. At reduction of fertilizing unevenness from 97 to 72 percent yield losses decrease by 54.4 percent. At reduction of fertilizing unevenness more than 97 percent, efficiency worsens by 58 percent. Poultry manure spreading by the machine and tractor unit MTZ-82.1 + ROU-6M afforded an yield by 38 percent higher, in comparison with the machine and tractor unit T-150K + PRT-10. At decrease in unevenness from 82 to 43 percent of barley loss decreased by 29 percent. It was revealed that spreading by machine ROU-6M provided a yield increase by 8.6 percent more, than by machine PRT-10. Yield losses because of spreading unevenness made: by the PRT-10 operating - 30 percent; by the ROU-6M operating - 0.33 percent. The grain yield increase was higher thanks to more evenness of fertilizer application by ROU-6M with the new spreading working element.
Control chart analysis of data regarding 0.2% yield strength (YS) and percent total circumferential elongation (%TCE) for zircaloy clad tubes for PHWR and BWR fuels

International Nuclear Information System (INIS)

Yadav, M.B.; Singh, Hari; Vaidyanathan, S.; Sood, D.D.; Raghavan, S.V.; Bandyopadhyay, A.K.; Kulkarni, P.G.

1992-01-01

Zircaloy cladding tubes for PHWR and BWR fuels are manufactured and tested at Nuclear Fuel Complex (NFC), Hyderabad. Atomic Fuels Division is carrying out the quality assurance of the fuels on behalf of Nuclear Power Corporation (NPC). In this paper an attempt has been made to assess whether the quality of the clad tubes has met the requirements specified for the two mechanical properties of the tubes namely 0.2% yield strength and percent total circumferential elongation using control chart technique. For this purpose data for about 100 lots in each case were used. Process means and process standard deviations for these properties and the control limits for the corresponding control charts were estimated. The main findings are: (i) In case of PHWR tubes the production quality level with respect to 0.2% YS is higher, while that in case of %TCE is lower causing rejection of lots. On the other hand in the case of BWR tubes the production quality levels with respect to both the properties are higher than the required one. (ii) With respect to 0.2% YS, in case of BWR tubes a change in the pattern of distribution is detected beyond the lot serial no.47. However in case of PHWR tubes, though the data falls into two groups, no such pattern is seen. A modification in the acceptance/rejection criterion of the lot has been suggested. It is also pointed out that to have a correct picture of the total variation it is necessary to study the within tube variation. (author). 4 figs, 2 tabs
Green synthesis of gold and silver nanoparticles using gallic acid: catalytic activity and conversion yield toward the 4-nitrophenol reduction reaction

Science.gov (United States)

Park, Jisu; Cha, Song-Hyun; Cho, Seonho; Park, Youmie

2016-06-01

In the present report, gallic acid was used as both a reducing and stabilizing agent to synthesize gold and silver nanoparticles. The synthesized gold and silver nanoparticles exhibited characteristic surface plasmon resonance bands at 536 and 392 nm, respectively. Nanoparticles that were approximately spherical in shape were observed in high-resolution transmission electron microscopy and atomic force microscopy images. The hydrodynamic radius was determined to be 54.4 nm for gold nanoparticles and 33.7 nm for silver nanoparticles in aqueous medium. X-ray diffraction analyses confirmed that the synthesized nanoparticles possessed a face-centered cubic structure. FT-IR spectra demonstrated that the carboxylic acid functional groups of gallic acid contributed to the electrostatic binding onto the surface of the nanoparticles. Zeta potential values of -41.98 mV for the gold nanoparticles and -53.47 mV for the silver nanoparticles indicated that the synthesized nanoparticles possess excellent stability. On-the-shelf stability for 4 weeks also confirmed that the synthesized nanoparticles were quite stable without significant changes in their UV-visible spectra. The synthesized nanoparticles exhibited catalytic activity toward the reduction reaction of 4-nitrophenol to 4-aminophenol in the presence of sodium borohydride. The rate constant of the silver nanoparticles was higher than that of the gold nanoparticles in the catalytic reaction. Furthermore, the conversion yield (%) of 4-nitrophenol to 4-aminophenol was determined using reversed-phase high-performance liquid chromatography with UV detection at 254 nm. The silver nanoparticles exhibited an excellent conversion yield (96.7-99.9 %), suggesting that the synthesized silver nanoparticles are highly efficient catalysts for the 4-nitrophenol reduction reaction.
Green synthesis of gold and silver nanoparticles using gallic acid: catalytic activity and conversion yield toward the 4-nitrophenol reduction reaction

Energy Technology Data Exchange (ETDEWEB)

Park, Jisu [Inje University, College of Pharmacy (Korea, Republic of); Cha, Song-Hyun; Cho, Seonho [Seoul National University, Department of Naval Architecture and Ocean Engineering (Korea, Republic of); Park, Youmie, E-mail: youmiep@inje.ac.kr [Inje University, College of Pharmacy (Korea, Republic of)

2016-06-15

In the present report, gallic acid was used as both a reducing and stabilizing agent to synthesize gold and silver nanoparticles. The synthesized gold and silver nanoparticles exhibited characteristic surface plasmon resonance bands at 536 and 392 nm, respectively. Nanoparticles that were approximately spherical in shape were observed in high-resolution transmission electron microscopy and atomic force microscopy images. The hydrodynamic radius was determined to be 54.4 nm for gold nanoparticles and 33.7 nm for silver nanoparticles in aqueous medium. X-ray diffraction analyses confirmed that the synthesized nanoparticles possessed a face-centered cubic structure. FT-IR spectra demonstrated that the carboxylic acid functional groups of gallic acid contributed to the electrostatic binding onto the surface of the nanoparticles. Zeta potential values of −41.98 mV for the gold nanoparticles and −53.47 mV for the silver nanoparticles indicated that the synthesized nanoparticles possess excellent stability. On-the-shelf stability for 4 weeks also confirmed that the synthesized nanoparticles were quite stable without significant changes in their UV–visible spectra. The synthesized nanoparticles exhibited catalytic activity toward the reduction reaction of 4-nitrophenol to 4-aminophenol in the presence of sodium borohydride. The rate constant of the silver nanoparticles was higher than that of the gold nanoparticles in the catalytic reaction. Furthermore, the conversion yield (%) of 4-nitrophenol to 4-aminophenol was determined using reversed-phase high-performance liquid chromatography with UV detection at 254 nm. The silver nanoparticles exhibited an excellent conversion yield (96.7–99.9 %), suggesting that the synthesized silver nanoparticles are highly efficient catalysts for the 4-nitrophenol reduction reaction.
Green synthesis of gold and silver nanoparticles using gallic acid: catalytic activity and conversion yield toward the 4-nitrophenol reduction reaction

International Nuclear Information System (INIS)

Park, Jisu; Cha, Song-Hyun; Cho, Seonho; Park, Youmie

2016-01-01

In the present report, gallic acid was used as both a reducing and stabilizing agent to synthesize gold and silver nanoparticles. The synthesized gold and silver nanoparticles exhibited characteristic surface plasmon resonance bands at 536 and 392 nm, respectively. Nanoparticles that were approximately spherical in shape were observed in high-resolution transmission electron microscopy and atomic force microscopy images. The hydrodynamic radius was determined to be 54.4 nm for gold nanoparticles and 33.7 nm for silver nanoparticles in aqueous medium. X-ray diffraction analyses confirmed that the synthesized nanoparticles possessed a face-centered cubic structure. FT-IR spectra demonstrated that the carboxylic acid functional groups of gallic acid contributed to the electrostatic binding onto the surface of the nanoparticles. Zeta potential values of −41.98 mV for the gold nanoparticles and −53.47 mV for the silver nanoparticles indicated that the synthesized nanoparticles possess excellent stability. On-the-shelf stability for 4 weeks also confirmed that the synthesized nanoparticles were quite stable without significant changes in their UV–visible spectra. The synthesized nanoparticles exhibited catalytic activity toward the reduction reaction of 4-nitrophenol to 4-aminophenol in the presence of sodium borohydride. The rate constant of the silver nanoparticles was higher than that of the gold nanoparticles in the catalytic reaction. Furthermore, the conversion yield (%) of 4-nitrophenol to 4-aminophenol was determined using reversed-phase high-performance liquid chromatography with UV detection at 254 nm. The silver nanoparticles exhibited an excellent conversion yield (96.7–99.9 %), suggesting that the synthesized silver nanoparticles are highly efficient catalysts for the 4-nitrophenol reduction reaction.
[Predicting the impact of climate change in the next 40 years on the yield of maize in China].

Science.gov (United States)

Ma, Yu-ping; Sun, Lin-li; E, You-hao; Wu, Wei

2015-01-01

Climate change will significantly affect agricultural production in China. The combination of the integral regression model and the latest climate projection may well assess the impact of future climate change on crop yield. In this paper, the correlation model of maize yield and meteorological factors was firstly established for different provinces in China by using the integral regression method, then the impact of climate change in the next 40 years on China's maize production was evaluated combined the latest climate prediction with the reason be ing analyzed. The results showed that if the current speeds of maize variety improvement and science and technology development were constant, maize yield in China would be mainly in an increasing trend of reduction with time in the next 40 years in a range generally within 5%. Under A2 climate change scenario, the region with the most reduction of maize yield would be the Northeast except during 2021-2030, and the reduction would be generally in the range of 2.3%-4.2%. Maize yield reduction would be also high in the Northwest, Southwest and middle and lower reaches of Yangtze River after 2031. Under B2 scenario, the reduction of 5.3% in the Northeast in 2031-2040 would be the greatest across all regions. Other regions with considerable maize yield reduction would be mainly in the Northwest and the Southwest. Reduction in maize yield in North China would be small, generally within 2%, under any scenarios, and that in South China would be almost unchanged. The reduction of maize yield in most regions would be greater under A2 scenario than under B2 scenario except for the period of 2021-2030. The effect of the ten day precipitation on maize yield in northern China would be almost positive. However, the effect of ten day average temperature on yield of maize in all regions would be generally negative. The main reason of maize yield reduction was temperature increase in most provinces but precipitation decrease in a few
7 CFR 762.129 - Percent of guarantee and maximum loss.

Science.gov (United States)

2010-01-01

... loss. (a) General. The percent of guarantee will not exceed 90 percent based on the credit risk to the lender and the Agency both before and after the transaction. The Agency will determine the percentage of... PLP lenders will not be less than 80 percent. (d) Maximum loss. The maximum amount the Agency will pay...
The effect of phosphorus application and liming in corn and soybean intercrop on the plant yield and symbiotic N fixation

International Nuclear Information System (INIS)

Sisworo, W.H.; Abdullah, N.; Rasyid, Havid; Soeminto, Bagyo

1986-01-01

A field experiment consisting of seven treatments and six replications was arranged in a randomized block design. The objectives of experiment were to study the effect of phosphorus placement and liming in corn and soybean intercrop on the plant yield and the amount of N fixed symbiotically by soybean. Results obtained shows the grain yield of soybean was influenced significantly by phosphorus placement, but corn was not. Fertilizer which was banded in the plant rows bellow seeds shows the higher grain yield of soybean that those broad-casted and incorporated with the soil or banded near the plant rows. Liming increased grain yield of soybean or corn as much as 31 percent higher than without lime. Lime also increased the amount of soybean N obtained from symbiotic N fixation. The partitioning of plant N requirement from soil, fixation, and fertilizer were subsequently 58, 36 and 6 percent. (author). 14 refs

Effect of salinity on grain yield and grain quality of wheat (triticum aestivum l.)

International Nuclear Information System (INIS)

Abbas, G.; Saqib, M.; Rafique, Q.; Rahman, A.U.; Akhtar, J.; Haq, M.A.U.

2013-01-01

Salinity is one of the important stresses resulting in the reduction of growth and yield of different crops including wheat. In saline soils the concentration of Na/sup +/ and Cl/sup -/ is higher accompanied with the decreased K/sup +/: Na/sup +/ ratio thus severely affecting the growth and yield of crops. The effect of salinity on the growth and yield of wheat is well documented, whereas there is very little information about salinity tolerance and grain quality of wheat. Present study was conducted to assess the effect of salinity on yield components, ionic relations and grain quality and to understand the relationship among these parameters. A pot experiment was conducted using wheat genotype Pasban-90. There were two treatments i.e. non-saline (0.33 dS m/sup -1/) and saline (15 dS m/sup -1/) with five replications. Salinity resulted in a significant reduction of the grain protein, fat and fiber contents. Similarly yield components were significantly reduced. Maximum reduction was noted in case of number of tillers plant/sup -1/, followed by grain weight plant/sup -1/. High Na/sup +/ and low K/sup +/, P concentration and K/sup +/: Na/sup +/ ratio was observed in the shoot, root and grain. This disturbed ionic composition seems to be apparent cause of yield reduction and deterioration of wheat quality under salinity. (author)
Long-term Low Radiation Decreases Leaf Photosynthesis, Photochemical Efficiency and Grain Yield in Winter Wheat

DEFF Research Database (Denmark)

Mu, H; Jiang, D; Wollenweber, Bernd

2010-01-01

the impact of low radiation on crop growth, photosynthesis and yield. Grain yield losses and leaf area index (LAI) reduction were less than the reduction in solar radiation under both shading treatment in both cultivars. Compared with the control (S0), grain yield only reduced 6.4 % and 9.9 % under 22.......0-22.9 % (S1) and 29.5-49.6 % (S2), which was consistent with the reduction in radiation. The reduction in LAI was partially compensated by increases in the fraction of the top and bottom leaf area to the total leaf area, which facilitated to intercept more solar radiation by the canopy. The decrease......Low radiation reduces wheat grain yield in tree-crop intercropping systems in the major wheat planting area of China. Here, two winter wheat (Triticum aestivum L) cultivars, Yangmai 158 (shading tolerant) and Yangmai 11 (shading sensitive), were shaded from jointing to maturity to evaluate...
Deficit Irrigation Effects on Yield, Yield Components and Seed Production of Three Cultivas of Watermelon (Citrullus lanatus (Thunb Matsum and Nakai

Directory of Open Access Journals (Sweden)

P. Jafari

2015-09-01

Full Text Available A two-year study (2005 - 2006 was carried out to explore the effect of deficit irrigation treatments according to evaporation from a class A basin, including ET= 1 (T1, ET = 0.75 (T2, and ET = 0.5 (T3, on yield, yield components and seed yield of three varieties of watermelon (Charleston Gray, Sugar Baby and Crimson Suite in the Varamin Agricultural Research Center of Iran. A randomized complete block design with a split plot arrangement with four replications was used. The results showed that fruit yield, yield components and seed yield were not significantly different in T1 and T2 treatments in contrary to T3 treatment. Among the yield components, number of fruits per plant most suffered from the negative impact of severe water stress (T3 (1.20 fruit per plant. Rind thickness, percent soluble solids in fruit and seed yield were not affected by water stress. According to phenotypic traits, and correlation coefficients, a significant positive correlation (1% probability level was observed between the weighted average, and the number of fruit with the fruit yield. Crimson Suite cultivar produced the highest yield (2533 kg ha-1 compared to the cultivars Charleston Gray and Sugar Baby. Sugar Baby and Crimson Suite cultivars, with 311.7 and 298.2 kg ha-1, respectively, produced the highest amount of seed. Crimson Suite cultiavr had the highest percentage of soluble solids in fruit (1.35. Rind thickness in Crimson Suites, Charleston Gray and Sugar Baby cultivars were 1.35, 1.13 and 1.10 cm, respectively. The results of this study showed that under a moderate moisture stress condition (ET = 0.75, fruit and seed yield could be similar to the no-water stress conditions.
Nitrogen rate strategies for reducing yield-scaled nitrous oxide emissions in maize

Science.gov (United States)

Zhao, Xu; Nafziger, Emerson D.; Pittelkow, Cameron M.

2017-12-01

Mitigating nitrogen (N) losses from agriculture without negatively impacting crop productivity is a pressing environmental and economic challenge. Reductions in N fertilizer rate are often highlighted as a solution, yet the degree to which crop yields and economic returns may be impacted at the field-level remains unclear, in part due to limited data availability. Farmers are risk averse and potential yield losses may limit the success of voluntary N loss mitigation protocols, thus understanding field-level yield tradeoffs is critical to inform policy development. Using a case study of soil N2O mitigation in the US Midwest, we conducted an ex-post assessment of two economic and two environmental N rate reduction strategies to identify promising practices for maintaining maize yields and economic returns while reducing N2O emissions per unit yield (i.e. yield-scaled emissions) compared to an assumed baseline N input level. Maize yield response data from 201 on-farm N rate experiments were combined with an empirical equation predicting N2O emissions as a function of N rate. Results indicate that the economic strategy aimed at maximizing returns to N (MRTN) led to moderate but consistent reductions in yield-scaled N2O emissions with small negative impacts on yield and slight increases in median returns. The economic optimum N rate strategy reduced yield-scaled N2O emissions in 75% of cases but increased them otherwise, challenging the assumption that this strategy will automatically reduce environmental impacts per unit production. Both environmental strategies, one designed to increase N recovery efficiency and one to balance N inputs with grain N removal, further reduced yield-scaled N2O emissions but were also associated with negative yield penalties and decreased returns. These results highlight the inherent tension between achieving agronomic and economic goals while reducing environmental impacts which is often overlooked in policy discussions. To enable the
Buckwheat yield and its quality as affected by laser biostimulation of its seeds

International Nuclear Information System (INIS)

Koper, R.; Mikos-Bielak, M.

2003-01-01

The influence of various doses of laser radiation applied to buckwheat seed bio stimulation on the yield, and changes of chemical composition was analysed. A 12-25 percent increase of yield was observed in bio stimulated plants. The most positive effects were achieved after seed triple radiation using a laser of 30 mW power for 0.1 s. Bio stimulation caused a slight increase of protein, fat and fiber content a large increase of soluble and reducing sugars and a decrease of starch level
The Effect of Carbonaceous Reductant Selection on Chromite Pre-reduction

Science.gov (United States)

Kleynhans, E. L. J.; Beukes, J. P.; Van Zyl, P. G.; Bunt, J. R.; Nkosi, N. S. B.; Venter, M.

2017-04-01

Ferrochrome (FeCr) production is an energy-intensive process. Currently, the pelletized chromite pre-reduction process, also referred to as solid-state reduction of chromite, is most likely the FeCr production process with the lowest specific electricity consumption, i.e., MWh/t FeCr produced. In this study, the effects of carbonaceous reductant selection on chromite pre-reduction and cured pellet strength were investigated. Multiple linear regression analysis was employed to evaluate the effect of reductant characteristics on the aforementioned two parameters. This yielded mathematical solutions that can be used by FeCr producers to select reductants more optimally in future. Additionally, the results indicated that hydrogen (H)- (24 pct) and volatile content (45.8 pct) were the most significant contributors for predicting variance in pre-reduction and compressive strength, respectively. The role of H within this context is postulated to be linked to the ability of a reductant to release H that can induce reduction. Therefore, contrary to the current operational selection criteria, the authors believe that thermally untreated reductants ( e.g., anthracite, as opposed to coke or char), with volatile contents close to the currently applied specification (to ensure pellet strength), would be optimal, since it would maximize H content that would enhance pre-reduction.
Effect of Bioregulators on Apple Yield and Quality Attributes | Ouma ...

African Journals Online (AJOL)

Experiments were conducted in 1995 and 1996 to investigate the effect of the two bioregulators; Accel and Carbaryl, sprayed two weeks before bloom on Apple fruit set, yield and quality and to relate the degree of fruit set reduction to the yield of three Apple cultivars namely, \\'Empire`, \\'Jon-A-Red\\' and `Braeburn\\'.
Thirty or sixty percent milk replacer reduction for calves: effects on alfalfa hay intake and digestibility, digestive kinetics and ruminal fermentation.

Science.gov (United States)

Broesder, J T; Judkins, M B; Krysl, L J; Gunter, S A; Barton, R K

1990-09-01

Twelve artificially reared, male Holstein calves, ruminally cannulated at 53 d of age, were used in a split-plot design to study the effects of no milk replacer reduction (CON), or reduction by 30% (30R) or 60% (60R) of this value on alfalfa hay intake and digestibility, ruminal fermentation and digestive kinetics. Milk replacer reduction began at 53 d of age and continued until 135 d of age, after which no milk replacer was fed. All calves had ad libitum access to long-stemmed alfalfa hay from birth. Five collection periods were conducted at average calf ages of 72, 87, 108, 129 and 151 d. Reducing the amount of milk replacer fed resulted in a linear increase (P less than .05) in forage OM intake; however, total OM intake (forage + milk) was not different (P greater than .10) among milk reduction groups. Size of particles in feces exhibited quadratic effects in response to milk replacer reduction (P less than .05) but only in the small (less than 150 microns) size groupings. Ruminal pH and ammonia and individual VFA concentrations (except isobutyrate) were not altered by milk reduction (P greater than .10) but increased (P less than .01) with calf age. Milk replacer reduction had a quadratic effect (P less than .05) on fluid outflow rate from the rumen, increasing as milk replacer was reduced. Other fluid and particulate kinetic data, as well as NDF digestion rate and DM digestion showed no effects (P greater than .10) from milk replacer reduction but changed with calf age. Milk replacer reduction increased forage intake but had minimal effects on digestive variables evaluated, suggesting that intake of milk replacer by calves can be reduced by up to 60% without disturbing forage fermentation and passage.
Increase of onion yield through low dose of gamma irradiation of its seeds

International Nuclear Information System (INIS)

Wiendl, F.M.; Wiendl, F.W.; Wiendl, J.A.; Vedovatto, A.; Arthur, V.

1995-01-01

The increase of onions' yield could be achieved by the common farmer through the use of nuclear techniques. This report describes the results obtained with the irradiation of onion seeds, with low doses of gamma radiations (Cobalt-60), at doses of 0 (control), 150, 400 and 700 Gy. Beyond the proper onion's variety als use of low dose rates of 13.1, 39.2 and 52.3 Gy per hour were of the great importance during irradiation. The results showed to be promising both in laboratory studies and in the field, resulting in an increase of onions production: A greater number of seedlings, bulbs and a higher yield in weight per hectar were planted. In the field the most promising dose and dose rate to the variety ''Super-X'' were respectively 150 Gy and 13.1 Gy per hour, yielding an 24.9 percent heavier weight of onions than the control. The other tested variety was ''Granex-33'', which did not respond so favorable to irradiation. However, also with this variety we harvested a 2.1 percent heavier weight than its control, if the onion seeds were irradiated with the dose of 700 Gy at a dose rate of 13.1 Gy per hour. (Author)
Does Asset Allocation Policy Explain 40, 90, 100 Percent of Performance?

OpenAIRE

Roger G. Ibbotson; Paul D. Kaplan

2001-01-01

Does asset allocation policy explain 40 percent, 90 percent, or 100 percent of performance? According to some well-known studies, more than 90 percent of the variability of a typical plan sponsor's performance over time is attributable to asset allocation. However, few people want to explain variability over time. Instead, an analyst might want to know how important it is in explaining the differences in return from one fund to another, or what percentage of the level of a typical fund's retu...
Multi-modal Aedes aegypti mosquito reduction interventions and dengue fever prevention.

Science.gov (United States)

Ballenger-Browning, Kara K; Elder, John P

2009-12-01

To systematically review the effectiveness of biological, chemical and educational dengue fever prevention programs on the reduction of entomologic indicators. Searches of PubMed, GoogleScholar, CabDirect databases and reference lists yielded over 1000 articles containing mosquito abatement interventions. Inclusion criteria were: Vector control programs targeting Aedes aegypti and Aedes albopictus mosquitoes; Studies providing pre- and post-test data. Intervention effectiveness was assessed using Mulla's formula to determine percent reductions for all studies with control groups. Twenty-one studies were reviewed. Twelve dependent variables were presented, however, the Breteau, House and Container indices were the primary measurement tools for monitoring larval populations. Behavioural methods consisting of educational campaigns and maintaining water containers to reduce the mosquito population were applied in eight studies. Eight studies involved the use of biological methods such as predatory organisms or bacteria. Finally, eight studies used chemical control techniques including insecticide sprays, larvicides, insecticide-treated materials, and cleaning water of containers with household chemicals with three studies using a combination of intervention techniques. Post-intervention reduction in entomologic indices ranged from 100% to an increase of 13.9% from baseline. Little evidence exists to support the efficacy of mosquito abatement programs owing to poor study designs and lack of congruent entomologic indices. Creation of a standard entomological index, use of clustered and randomized-controlled trials, and testing the generalizability of proven methods are recommended for future research.
Decomposing global crop yield variability

Science.gov (United States)

Ben-Ari, Tamara; Makowski, David

2014-11-01

Recent food crises have highlighted the need to better understand the between-year variability of agricultural production. Although increasing future production seems necessary, the globalization of commodity markets suggests that the food system would also benefit from enhanced supplies stability through a reduction in the year-to-year variability. Here, we develop an analytical expression decomposing global crop yield interannual variability into three informative components that quantify how evenly are croplands distributed in the world, the proportion of cultivated areas allocated to regions of above or below average variability and the covariation between yields in distinct world regions. This decomposition is used to identify drivers of interannual yield variations for four major crops (i.e., maize, rice, soybean and wheat) over the period 1961-2012. We show that maize production is fairly spread but marked by one prominent region with high levels of crop yield interannual variability (which encompasses the North American corn belt in the USA, and Canada). In contrast, global rice yields have a small variability because, although spatially concentrated, much of the production is located in regions of below-average variability (i.e., South, Eastern and South Eastern Asia). Because of these contrasted land use allocations, an even cultivated land distribution across regions would reduce global maize yield variance, but increase the variance of global yield rice. Intermediate results are obtained for soybean and wheat for which croplands are mainly located in regions with close-to-average variability. At the scale of large world regions, we find that covariances of regional yields have a negligible contribution to global yield variance. The proposed decomposition could be applied at any spatial and time scales, including the yearly time step. By addressing global crop production stability (or lack thereof) our results contribute to the understanding of a key
Genotypic Variability of the Components and their Effects on the Rice Yield: Correlation and Path Analysis Study

Directory of Open Access Journals (Sweden)

Sharkhawat Hossain

2008-06-01

Full Text Available Twenty modern Boro rice varieties were evaluated with a view to find variability and genetic association for grain yield and yield components characters. Genotypic and Phenotypic correlation among these characters were computed. Both genotypic and phenotypic correlation coefficients were significant between plant height and number of effective tillers per plant followed by panicle length. There was a positive significant correlation between yield and number of effective tillers per plant followed by percent filled grain per panicle. Path coefficient showed that number of effective tiller per plant and plant height are the characters that contribute largely to grain yield.
Effect of Sowing Date and Sulfur on Yield, Oil Content and Grain Nitrogen of Safflower (Carthamus tinctorius L. in Autumn Cultivation

Directory of Open Access Journals (Sweden)

N Safara

2016-12-01

Full Text Available Introduction Nowadays oilseed crops are considered as the second most important sources of energy in the diet. In this regard, cultivation of oilseed crops such as safflower (Carthamus tinctorius L. is important due to quality of oil seed and medicinal properties. Different planting dates leads to adaptation of vegetative and reproductive growth of plant to temperature, day-length and various solar radiations and as a result affects plant’s development phase and yield. With delayed planting date , temperature and day length increases and development phase will accelerate. In this condition the crop yield will reduce due to crop growth and developmental period will shorten. Sulfur is an essential element for plant nutrition and its role is greater than Phosphorus. Using sulfur increases the heads per plant and grain yield. In order to investigate the effect of sulfur fertilizer under heat stress condition at the terminal growth stages and its role in reducing the negative effects of high temperature stress on safflower, this research was performed. Materials and Methods In order to study effect of planting date and sulfur manure on yield components, nitrogen and oil percent in safflower, a field experiment was carried out in a randomized complete blocks design with three replications in as split plot arrangement at Ramin Agriculture and Natural Resources University of Khuzestan during 2013-2014. The experimental treatments consisted of four planting dates of 30 November, 21 December, 22 January and 1st February were randomly placed in main plots and four levels of sulfur of 0, 200, 400 and 600 kg ha-1 performed randomly in subplots, Sulfur fertilizer was corporated to soil one week before each planting date. Harvest was performed from the mid-May to early-June, during physiological maturity. To measure the yield on maturity time after the removal of margins, Safflower plants were harvested from one m2 unit area. Nitrogen percent was determined
Diastereoselective and enantioselective reduction of tetralin-1,4-dione

Directory of Open Access Journals (Sweden)

2008-10-01

Full Text Available BackgroundThe chemistry of tetralin-1,4-dione, the stable tautomer of 1,4-dihydroxynaphthalene, has not been explored previously. It is readily accessible and offers interesting opportunities for synthesis.ResultsThe title reactions were explored. L-Selectride reduced the diketone to give preferentially the cis-diol (d.r. 84 : 16. Red-Al gave preferentially the trans-diol (d.r. 13 : 87. NaBH4, LiAlH4, and BH3 gave lower diastereoselectivities (yields: 76–98%. Fractional crystallization allowed isolation of the cis-diol and the trans-diol (55% and 66% yield, respectively. Borane was used to cleanly give the mono-reduction product. Highly enantioselective CBS reductions afforded the trans-diol (72% yield, 99% ee and the mono-reduction product (81%, 95% ee.ConclusionDiastereoselective and enantioselective reductions of the unexplored tetralin-1,4-dione provides a very convenient entry into a number of synthetically highly attractive 1,4-tetralindiols and 4-hydroxy-1-tetralone.
Diastereoselective and enantioselective reduction of tetralin-1,4-dione.

Science.gov (United States)

Kündig, E Peter; Enriquez-Garcia, Alvaro

2008-01-01

The chemistry of tetralin-1,4-dione, the stable tautomer of 1,4-dihydroxynaphthalene, has not been explored previously. It is readily accessible and offers interesting opportunities for synthesis. The title reactions were explored. L-Selectride reduced the diketone to give preferentially the cis-diol (d.r. 84 : 16). Red-Al gave preferentially the trans-diol (d.r. 13 : 87). NaBH(4), LiAlH(4), and BH(3) gave lower diastereoselectivities (yields: 76-98%). Fractional crystallization allowed isolation of the cis-diol and the trans-diol (55% and 66% yield, respectively). Borane was used to cleanly give the mono-reduction product. Highly enantioselective CBS reductions afforded the trans-diol (72% yield, 99% ee) and the mono-reduction product (81%, 95% ee). Diastereoselective and enantioselective reductions of the unexplored tetralin-1,4-dione provides a very convenient entry into a number of synthetically highly attractive 1,4-tetralindiols and 4-hydroxy-1-tetralone.
Diffusive tunneling for alleviating Knudsen-layer reactivity reduction under hydrodynamic mix

Science.gov (United States)

Tang, Xianzhu; McDevitt, Chris; Guo, Zehua

2017-10-01

Hydrodynamic mix will produce small features for intermixed deuterium-tritium fuel and inert pusher materials. The geometrical characteristics of the mix feature have a large impact on Knudsen layer yield reduction. We considered two features. One is planar structure, and the other is fuel cells segmented by inert pusher material which can be represented by a spherical DT bubble enclosed by a pusher shell. The truly 3D fuel feature, the spherical bubble, has the largest degree of yield reduction, due to fast ions being lost in all directions. The planar fuel structure, which can be regarded as 1D features, has modest amount of potential for yield degradation. While the increasing yield reduction with increasing Knudsen number of the fuel region is straightforwardly anticipated, we also show, by a combination of direct simulation and simple model, that once the pusher materials is stretched sufficiently thin by hydrodynamic mix, the fast fuel ions diffusively tunnel through them with minimal energy loss, so the Knudsen layer yield reduction becomes alleviated. This yield recovery can occur in a chunk-mixed plasma, way before the far more stringent, asymptotic limit of an atomically homogenized fuel and pusher assembly. Work supported by LANL LDRD program.
X-ray induced inactivation of the capacity for photosynthetic oxygen evolution and nitrate reduction in blue-green algae

International Nuclear Information System (INIS)

Stevens, S.E. Jr.; Simic, M.G.; Rao, V.S.K.

1975-01-01

The level of inactivation of oxygen evolving photosynthesis in the green alga, Chlorella pyrenoidosa was 12 percent in N 2 at a dose of 100 krad of x irradiation. Under similar conditions, as well as under O 2 , there resulted a 20 percent inactivation of the same function in the blue-green algae, Agmenellum quadruplicatum, strains PR-6 and AQ-6. Nitrate reduction capacity in the mutant AQ-6 was inactivated to 40 percent in N 2 and to 7 percent in O 2 . Catalase and formate provided some protection from irradiation in O 2 , suggesting some inactivation by H 2 O 2 . Most of the damage to the nitrate reduction system resulted from the direct action of x irradiation on a constitutive subunit of the nitrate reductase complex. Moreover, the slight inactivation of the O 2 evolving system, a function which is associated with photosystem II, cannot account for the inactivation of nitrate reduction
Catalyst and method for reduction of nitrogen oxides

Science.gov (United States)

Ott, Kevin C [Los Alamos, NM

2008-05-27

A Selective Catalytic Reduction (SCR) catalyst was prepared by slurry coating ZSM-5 zeolite onto a cordierite monolith, then subliming an iron salt onto the zeolite, calcining the monolith, and then dipping the monolith either into an aqueous solution of manganese nitrate and cerium nitrate and then calcining, or by similar treatment with separate solutions of manganese nitrate and cerium nitrate. The supported catalyst containing iron, manganese, and cerium showed 80 percent conversion at 113 degrees Celsius of a feed gas containing nitrogen oxides having 4 parts NO to one part NO.sub.2, about one equivalent ammonia, and excess oxygen; conversion improved to 94 percent at 147 degrees Celsius. N.sub.2O was not detected (detection limit: 0.6 percent N.sub.2O).
The Texas Ten Percent Plan's Impact on College Enrollment

Science.gov (United States)

Daugherty, Lindsay; Martorell, Paco; McFarlin, Isaac, Jr.

2014-01-01

The Texas Ten Percent Plan (TTP) provides students in the top 10 percent of their high-school class with automatic admission to any public university in the state, including the two flagship schools, the University of Texas at Austin and Texas A&M. Texas created the policy in 1997 after a federal appellate court ruled that the state's previous…

Weight reduction and aortic stiffness in obese children and adolescents

DEFF Research Database (Denmark)

Hvidt, K. N.; Olsen, M. H.; Ibsen, H.

2015-01-01

Little is known about the effect of weight reduction on aortic stiffness and especially so in the young. The present study investigates whether weight reduction influences aortic stiffness in obese children and adolescents. Carotid-femoral pulse wave velocity (cfPWV) and augmentation index at heart...... was found in AIx@HR75 (Delta AIx@HR75: 2.10 +/- 9.73%, P = 0.072), but changes in AIx@HR75 were related to changes in abdominal fat (Delta waist/height ratio: beta = 50.3, 95% CI 6.7-94.0, P = 0.02) and changes in total body fat percent by dual energy X-ray absorptiometry scan (Delta total body fat...... (%): beta = 0.7, 95% CI 0.1-1.3, P = 0.02) when adjusted for gender and relevant baseline confounders. In conclusion, no clear effect of weight reduction was found on aortic stiffness, although changes in AIx@HR75 were associated with changes in both abdominal fat and total body fat percent. The higher cf...
GGE biplot and AMMI application in the study of adaptability and grain yield stability of durum lines under dryland conditions

Directory of Open Access Journals (Sweden)

Behzad Sadeghzadeh

2018-06-01

Full Text Available Introduction Durum wheat (Triticum turgidum var. durum is grown for human consumption, mainly as pasta products, e.g., spaghetti and macaroni, couscous, bulgur, frike, flat breads, etc. Worldwide, the area annually planted to durum wheat is estimated to be around 17-18 million hectares, i.e., 8 percent of total wheat area, with a production averaging about 30 million tons annually, which is 5.5 percent of total wheat production. Although durum is grown in various regions of the world, the great bulk of durum area and production is concentrated in the Mediterranean basin and North America. Eight countries (Algeria, Canada, Italy, Morocco, Syria, Tunisia, Turkey, and USA account for nearly two thirds (2/3 of world durum area and production. In Iran, the area under durum cultivation is about 400-500 thousands hectares with an annual production of 400-500 thousand tons, which covers about 60% of country demands. In spite of the importance of durum for Iranian rural economies, the country has not all succeeded in its research and development efforts to substantially improve durum productivity. The combinations of increasing demand for durum and durum products, as a result of demographic pressure, and relatively low durum productivity partly due to abiotic stresses (i.e. cold, terminal heat, moisture and nutrient deficiency stresses made the country to an importer of durum. These are frequently exacerbated by biotic stresses, e.g., diseases and insects that may severely inhibit crop growth. Materials and methods The main purpose of this study was to achieve high yielding durum wheat genotypes with higher yield stability in different environmental condition, tolerance to environmental stresses such as cold damage, drought and end of season heat stress. Hence, 17 durum wheat lines were evaluated for grain yeild and morphlogical traits in Maragheh, Sararood, Qamloo, Ardabil and Shirvan agricultural research stations in 2011-14. In each location, the
Analysis association of milk fat and protein percent in quantitative ...

African Journals Online (AJOL)

Analysis association of milk fat and protein percent in quantitative trait locus ... African Journal of Biotechnology ... Protein and fat percent as content of milk are high-priority criteria for financial aims and selection of programs in dairy cattle.
Assessment of Cane Yields on Well-drained Ferralsols in the Sugar-cane Estate of Central Cameroon

Directory of Open Access Journals (Sweden)

Van Ranst, E.

1999-01-01

Full Text Available The potential yields of irrigated and of rainfed sugar-cane on three ferrallitic soil series, well represented in the Nkoteng sugar-cane estate of Central Cameroon, are estimated following different methods. The potential yield of irrigated sugar-cane is estimated from the total maximum evapotranspiration during the crop cycle. The potential yield of rainfed sugar-cane is estimated following two methods for the establishment of a water balance and for the determination of a yield reduction as a result of a water deficit. The calculated potential yields are higher than the observed ones. The yield reduction due to rain fed cropping can mainly be attributed to water shortage during the late yield formation and the ripening periods. A supplementary yield decline is due to a combined action of an acid soil reaction, a possible Al-toxicity a low base saturation, an inadequate CEC, organic matter content and P-availability which may adequately explain the actual yield level.
Trends in nutrient concentrations, loads, and yields in streams in the Sacramento, San Joaquin, and Santa Ana Basins, California, 1975-2004

Science.gov (United States)

Kratzer, Charles R.; Kent, Robert; Seleh, Dina K.; Knifong, Donna L.; Dileanis, Peter D.; Orlando, James L.

2011-01-01

San Joaquin Basin but decreased in the Sacramento and Santa Ana Basins from 1982 to 2002. Tile drainage accounted for 22 percent of the total nitrogen load in the San Joaquin River near Vernalis for 1985-2004. Nutrient loads and trends were calculated by using the log-linear multiple-regression model, LOADEST. Loads were calculated for water years 1975-2004 for 22 sites in the Sacramento Basin, 15 sites in the San Joaquin Basin, and 6 sites in the Santa Ana Basin. The average annual load of total nitrogen and total phosphorus for 1985-2004 in subbasins in the Sacramento and San Joaquin Basins were divided by their drainage areas to calculate average annual yield. Total nitrogen yields were greater than 2.45 tons per square mile per year [(tons/mi2)/yr] in about 61 percent of the valley floor in the San Joaquin Basin compared with only about 12 percent of the valley floor in the Sacramento Basin. Total phosphorus yields were greater than 0.34 (tons/mi2)/yr in about 43 percent of the valley floor in the San Joaquin Basin compared with only about 5 percent in the valley floor of the Sacramento Basin. In a stepwise multiple linear-regression analysis of 30 subbasins in the Sacramento and San Joaquin Basins, the most important explanatory variables (out of 11 variables) for the response variable (total nitrogen yield) were the percentage of land use in (1) orchards and vineyards, (2) row crops, and (3) urban categories. For total phosphorus yield, the most important explanatory variable was the amount of fertilizer application plus manure production. Trends were evaluated for three time periods: 1975-2004, 1985-2004, and 1993-2004. Most trends in flow-adjusted concentrations of nutrients in the Sacramento Basin were downward for all three time periods. The decreasing nutrient trends in the American River at Sacramento and the Sacramento River at Freeport for 1975-2004 were attributed to the consolidation of wastewater in the Sacramento metropolitan area in December 1982 to
Bomb reduction of uranium tetrafluoride. Part II: Influence of the addition elements in the reduction process

International Nuclear Information System (INIS)

Anca Abati, R.; Lopez Rodriguez, M.

1962-01-01

This work shows the influence of uranium oxide and uranyl fluoride in the reduction of uranium with Ca and Mg. These additions are more harmful when using smaller bombs. The uranyl fluoride has influence in the reduction process; the curves yield-concentration shows two regions depending upon the salt concentration. The behaviour of this addition in these regions can be explained following the different decompositions that can take place during the reduction process. (Author) 9 refs
Optimization of components in high-yield synthesis of block copolymer-mediated gold nanoparticles

International Nuclear Information System (INIS)

Ray, Debes; Aswal, Vinod Kumar

2012-01-01

The optimization to achieve stable and high-yield gold nanoparticles in block copolymer-mediated synthesis has been examined. Gold nanoparticles are synthesized using block copolymer P85 in gold salt HAuCl 4 ·3H 2 O solution. This method usually has a very limited yield which does not simply increase with the increase in the gold salt concentration. We show that the yield can be enhanced by increasing the block copolymer concentration but is limited to the factor by which the concentration is increased. On the other hand, the presence of an additional reductant (trisodium citrate) in 1:1 molar ratio with gold salt enhances the yield by manyfold. In this case (with additional reductant), the stable and high-yield nanoparticles having size about 14 nm can be synthesized at very low block copolymer concentrations. These nanoparticles thus can be efficiently used for their application such as for adsorption of proteins.
Measurement of Fission Product Yields from Fast-Neutron Fission

Science.gov (United States)

Arnold, C. W.; Bond, E. M.; Bredeweg, T. A.; Fowler, M. M.; Moody, W. A.; Rusev, G.; Vieira, D. J.; Wilhelmy, J. B.; Becker, J. A.; Henderson, R.; Kenneally, J.; Macri, R.; McNabb, D.; Ryan, C.; Sheets, S.; Stoyer, M. A.; Tonchev, A. P.; Bhatia, C.; Bhike, M.; Fallin, B.; Gooden, M. E.; Howell, C. R.; Kelley, J. H.; Tornow, W.

2014-09-01

One of the aims of the Stockpile Stewardship Program is a reduction of the uncertainties on fission data used for analyzing nuclear test data [1,2]. Fission products such as 147Nd are convenient for determining fission yields because of their relatively high yield per fission (about 2%) and long half-life (10.98 days). A scientific program for measuring fission product yields from 235U,238U and 239Pu targets as a function of bombarding neutron energy (0.1 to 15 MeV) is currently underway using monoenergetic neutron beams produced at the 10 MV Tandem Accelerator at TUNL. Dual-fission chambers are used to determine the rate of fission in targets during activation. Activated targets are counted in highly shielded HPGe detectors over a period of several weeks to identify decaying fission products. To date, data have been collected at neutron bombarding energies 4.6, 9.0, 14.5 and 14.8 MeV. Experimental methods and data reduction techniques are discussed, and some preliminary results are presented.
Serum Predictors of Percent Lean Mass in Young Adults.

Science.gov (United States)

Lustgarten, Michael S; Price, Lori L; Phillips, Edward M; Kirn, Dylan R; Mills, John; Fielding, Roger A

2016-08-01

Lustgarten, MS, Price, LL, Phillips, EM, Kirn, DR, Mills, J, and Fielding, RA. Serum predictors of percent lean mass in young adults. J Strength Cond Res 30(8): 2194-2201, 2016-Elevated lean (skeletal muscle) mass is associated with increased muscle strength and anaerobic exercise performance, whereas low levels of lean mass are associated with insulin resistance and sarcopenia. Therefore, studies aimed at obtaining an improved understanding of mechanisms related to the quantity of lean mass are of interest. Percent lean mass (total lean mass/body weight × 100) in 77 young subjects (18-35 years) was measured with dual-energy x-ray absorptiometry. Twenty analytes and 296 metabolites were evaluated with the use of the standard chemistry screen and mass spectrometry-based metabolomic profiling, respectively. Sex-adjusted multivariable linear regression was used to determine serum analytes and metabolites significantly (p ≤ 0.05 and q ≤ 0.30) associated with the percent lean mass. Two enzymes (alkaline phosphatase and serum glutamate oxaloacetate aminotransferase) and 29 metabolites were found to be significantly associated with the percent lean mass, including metabolites related to microbial metabolism, uremia, inflammation, oxidative stress, branched-chain amino acid metabolism, insulin sensitivity, glycerolipid metabolism, and xenobiotics. Use of sex-adjusted stepwise regression to obtain a final covariate predictor model identified the combination of 5 analytes and metabolites as overall predictors of the percent lean mass (model R = 82.5%). Collectively, these data suggest that a complex interplay of various metabolic processes underlies the maintenance of lean mass in young healthy adults.
Evaluation of quantitative relationships between saffron yield and nutrition (on farm trial

Directory of Open Access Journals (Sweden)

mohamad ali behdani

2009-06-01

Full Text Available In order to relate production of saffron and utilization of nutrients, a study was conducted in 2001 and 2002. Four selected locations for this study were Birjand, Gonabad, Qaen and Torbat-Haydariah, which are the main saffron production centers in Iran. This study was performed in 160 saffron farms, aged between 1 and 5 years. Manure, nitrogen and phosphorous fertilizers showed a positive linear relation with yield and length of flowering, while nitrogen and phosphorous showed a negative linear relation with start of flowering period. Yield of saffron showed a significant and positive correlation with the amount of applied manure and the saffron farms with age 4-5 year had highest yield. Our results showed that manure was the most effective factor in production of saffron. The beneficial effects of manure could be due to slow release of nutrients and enhancing soil physical properties. Stepwise regression analysis of yield and fertilizer application showed that 67 percent of yield variations was attributed to manure and phosphorous application.
Effect of planting date on yield of wheat genotypes in Sindh

International Nuclear Information System (INIS)

Khokhar, Z.; Hussain, I.

2010-01-01

Due to reduction in tillering period and increased risk of hot weather during grain filling, late planting results in linear reduction in wheat grain yield. A study was undertaken to determine the effects of planting dates on growth and yield of different wheat genotypes in Sindh. The trial was laid out in RCBD with split plot arrangement having four replications during 2000-01 and 2001-02 at Sakrand, Sindh. Four sowing dates i.e. November 1 and 15, December 1 and 15 were in main plots, whereas six wheat genotypes (V-7001, V-7002, V-7004, MPT-6, Abadgar-93, and Anmol-91) were in sub plots. Because of better tillering, plant growth, growth period, number of grain per unit area and grain weight, November 15 planted wheat had maximum grain yield of 5904 kg ha/sup -1/, followed by November 1 and December 1 which gave 5302 and 4948 kg ha/sup -1 /respectively. Wheat planted on December 15 resulted in minimum grain yield of 4756 kg ha/sup -1/. Wheat genotype, V-7002 had significantly (P<0.05) higher grain yield of 5578 kg ha/sup -1/ in comparison with other genotypes. Whereas genotype MPT-6 had grain yield of 5366 kg ha-1 that was also significantly higher than other genotypes. However, V-7004 had minimum grain yield of 4716 kg ha/sup -1/ in comparison with other genotypes. While evaluating performance of different genotypes on different sowing dates, V-7002 resulted in maximum yield on November 15 and late planting. On the other hand, V-7004 had lower yield on all planting dates. Results from the study revealed that maximum grain yield could be achieved with wheat planted in first fortnight of November and any delay in wheat planting might reduce wheat yield. (author)
Dolochar as a reductant in the reduction roasting of iron ore slimes

Science.gov (United States)

Rath, Swagat S.; Rao, Danda Srinivas

2017-12-01

The present investigation examines the viability of dolochar, a sponge iron industry waste material, as a reductant in the reduction roasting of iron ore slimes, which are another waste generated by iron ore beneficiation plants. Under statistically determined optimum conditions, which include a temperature of 900°C, a reductant-to-feed mass ratio of 0.35, and a reduction time of 30-45 min, the roasted mass, after being subjected to low-intensity magnetic separation, yielded an iron ore concentrate of approximately 64wt% Fe at a mass recovery of approximately 71% from the feed iron ore slime assaying 56.2wt% Fe. X-ray diffraction analyses indicated that the magnetic products contain magnetite and hematite as the major phases, whereas the nonmagnetic fractions contain quartz and hematite.
Photochemical reduction of uranyl ion with triphenylphosphine

International Nuclear Information System (INIS)

Brar, A.S.; Sidhu, M.S.; Sandhu, S.S.

1981-01-01

Photochemical reduction of uranyl ion with triphenylphosphine has been studied in acetone-water medium in the presence of sulphuric acid at 346nm, 400nm and 434nm wavelengths. The photochemical reduction is of second order and increases with increase in hydrogen ion concentration. Absorption spectra of uranyl ion in acidic medium and uranyl ion with triphenylphosphine do not show any ground state complex formation. The value of quantum yield increases with the wavelength of the radiation increase from 346 to 434nm. Plots of reciprocal of quantum yield for the formation of U(IV) versus reciprocal [triphenylphosphine] are linear. Products characterized by UV and visible, IR and TLC show the formation of U(IV) and triphenylphosphine oxide. On the basis of above observations mechanism of the photochemical reduction has been proposed. (author)
Biomass production of 12 winter cereal cover crop cultivars and their effect on subsequent no-till corn yield

Science.gov (United States)

Cover crops can improve the sustainability and resilience of corn and soybean production systems. However, there have been isolated reports of corn yield reductions following winter rye cover crops. Although there are many possible causes of corn yield reductions following winter cereal cover crops,...
Significant reductions in heart and lung doses using semi lateral ...

African Journals Online (AJOL)

Amr Abdul Aziz

decubitus techniques for left sided breast cancer patients: A comparative ... Peer review under responsibility of Alexandria University Faculty of Medicine. ..... Percent of reduction is calculated as new number – original number/original number ...
Responses of Seed Yield, Yield Components and Some Morpho-physiological Traits of Wheat Cultivars (Triticum aestivum to the Application Methods of Fulzyme Biofertilizer

Directory of Open Access Journals (Sweden)

A. Eslami

2014-10-01

Full Text Available To study the effect of application methods of Fulzym biofertilizer (containing Bacillus subtilis on yield, yield components and some morpho-physiological characteristics of four cultivars wheat, an experiment was conducted in field of Astan Quds Razavi in 2010- 2011. The experiment performed was in split plot based on randomized complete block design with three replications. Four wheat cultivars (Falat, Pishtaz, Bahar and Toos were assigned to main plots and four biofertilizer application methods (as seed inoculation, using in irrigation water, seed inoculation and irrigation and control to sub plots. Results indicated that Falat had the lowest plant height (61.5 cm than other varieties. Plant height of Toos and Pishtaz were about 14.5 percent higher than Falat. Application methods of Fulzym increased chlorophyll content and plant height. Highest chlorophyll contents were obtained when seeds inoculated by Fulzyme and used through irrigation. At the end of growing season, it was found that chlorophyll content of Falat and Toos flag leaves were higher than Pishtaz and Bahar. It was also revealed that Bahar when Fulzyme was used showed a better response to treatments than other varieties as for as biological and seed yields were concerned. Highest seed yield produced by irrigation and combination of seed inoculation and irrigation (9063 and 8609 kg.ha-1 and lowest seed yield (5858 kg.ha-1 to Falat in the control treatment.
Association between Empirically Estimated Monsoon Dynamics and Other Weather Factors and Historical Tea Yields in China: Results from a Yield Response Model

Directory of Open Access Journals (Sweden)

Rebecca Boehm

2016-04-01

Full Text Available Farmers in China’s tea-growing regions report that monsoon dynamics and other weather factors are changing and that this is affecting tea harvest decisions. To assess the effect of climate change on tea production in China, this study uses historical weather and production data from 1980 to 2011 to construct a yield response model that estimates the partial effect of weather factors on tea yields in China, with a specific focus on East Asian Monsoon dynamics. Tea (Camellia sinensis (L. Kunze has not been studied using these methods even though it is an important crop for human nutrition and the economic well-being of rural communities in many countries. Previous studies have approximated the monsoon period using historical average onset and retreat dates, which we believe limits our understanding of how changing monsoon patterns affect crop productivity. In our analysis, we instead estimate the monsoon season across China’s tea growing regions empirically by identifying the unknown breakpoints in the year-by-province cumulative precipitation. We find that a 1% increase in the monsoon retreat date is associated with 0.481%–0.535% reduction in tea yield. In the previous year, we also find that a 1% increase in the date of the monsoon retreat is associated with a 0.604% decrease in tea yields. For precipitation, we find that a 1% increase in average daily precipitation occurring during the monsoon period is associated with a 0.184%–0.262% reduction in tea yields. In addition, our models show that 1% increase in the average daily monsoon precipitation from the previous growing season is associated with 0.258%–0.327% decline in yields. We also find that a 1% decrease in solar radiation in the previous growing season is associated with 0.554%-0.864% decrease in tea yields. These findings suggest the need for adaptive management and harvesting strategies given climate change projections and the known negative association between excess
Yield gap analysis of Chickpea under semi-arid conditions: A simulation study

Directory of Open Access Journals (Sweden)

seyed Reza Amiri Deh ahmadi

2016-05-01

Full Text Available Yield gap analysis provides an essential framework to prioritize research and policy efforts aimed at reducing yield constraints. To identify options for increasing chickpea yield, the SSM-chickpea model was parameterized and evaluated to analyze yield potentials, water limited yields and yield gaps for nine regions representing major chickpea-growing areas of Razavi Khorasan province. The average potential yield of chickpea for the locations was 2251 kg ha-1, while the water limited yield was 1026 kg ha-1 indicating a 54% reduction in yield due to adverse soil moisture conditions. Also, the average irrigated and rainfed actual yields were respectively 64% and 79% less than simulated potential and water limited yields. Maximum and minimum yield gap between potential yield and actual yield were observed in Quchan and Torbat-jam respectively. Generally, yield gap showed an increasing trend from the north (including Nishabur, Mashhad, Quchan and Daregaz regions to the south of the province (Torbat- Jam and Gonabad. In addition, yield gap between simulated water limited potential yield and rainfed actual yield were very low because both simulated water limiting potential and average rainfed actual yields were low in these regions. Yield gap analysis provides an essential framework to prioritize research and policy efforts aimed at reducing yield constraints. To identify options for increasing chickpea yield, the SSM-chickpea model was parameterized and evaluated to analyze yield potentials, water limited yields and yield gaps for nine regions representing major chickpea-growing areas of Razavi Khorasan province. The average potential yield of chickpea for the locations was 2251 kg ha-1, while the water limited yield was 1026 kg ha-1 indicating a 54% reduction in yield due to adverse soil moisture conditions. Also, the average irrigated and rainfed actual yields were respectively 64% and 79% less than simulated potential and water limited yields
Yield potential of a radiation induced early-dwarf mutant in linseed

International Nuclear Information System (INIS)

Nayar, G.G.

1975-01-01

An early maturing dwarf mutant, TL-1 was isolated in the high yielding linseed (Linum usitatissimum L.) wariety Neelum following seed irradiation with 50 kR gamma rays. The yield components of the mutant have been evaluated for its productivity in the M 7 generation. TL-1 is compact and significantly short in height (41.8 +- 2.71 cm) as compared to Neelum (79.2 +- 3.08 cm). In flowering the mutant is 30 days earlier than the parent under Trombay conditions. TL-1 and Neelum did not differ significantly in their mean number of primary branches. Although the mean seed yield per plant is lower, in 1000 seed weight the mutant is markedly superior to the parent. The oil content in TL-1 is significantly higher by 3.5 percent points than Neelum and its oil is lighter in colour. By growing more plants per unit area with reduced spacing, the yield potential of TL-1 was considerably increased. The productivity of oil per hectare per day of TL-1 was higher than Neelum. (author)
Plant growth analysis used as secondary traits in selection for high yield on groundnut

International Nuclear Information System (INIS)

Manshuri, A.G.; Nugrahaeni

1996-01-01

Groundnut growth and yield can be expressed as the product to solar radiation interception (Qi), conversion efficiency of radiation to total dry matter (Ek) and partitioning efficiency to economic yield (Ep) or harvest index. Groundnut genotypes differ in characters related to Qi, Ek and Ep, and the characters have the possibility to be used as secondary traits in selection for high yield. Extinction coefficient (k) and leaf area index (LAI) are the influential factors in increasing Qi. Variability in leaf size lead to the description of the existence of variability in k value within the genotypes under study. LAI three is the level necessary to attain 90 percent total radiation absorption in groundnut. An increased of LAI exceeding four would be inefficient for increasing the fraction of radiation absorption. Convertion efficiency of radiation to total dry matter (Ek) related to the rate of plant photosynthesis and respiration, inspite of the need study the field, however, the study was still limited. Harvest index can be used as a secondary trait to identify high yield genotypes. There was a positive correlation between pod yield and harvest index. An increased of harvest index by 1 percent caused an increased of dry pod as high as 0.365 g/plant. ICG 1697, ICGV 86844 and ICGV 87161 gave yield more than 3.5 t/ha, and their total dry matter (TDM) were 49.2, 52.5 and 40.7 g/plant, whereas their harvest indexes (HI) were 0.47, 0.46 and 0.55, respectively. Theoretically, improvement of the groundnut pod yield can be attained by using variety which has TDM 52.5 g/plant and HI 0.55. Using HI as secondary selection criteria, five genotypes were selected, i.e., G/C/LM-88-B-25 (HI 0.59), local Irian and local Lombok (HI 0.57), ICGV 87161 and LM/ICGV 87165-B-2-1 (HI 0.55). Two genotypes were selected for their high TDM, namely ICGV 86844 and LM/ICGV 87165-88-B-82 [in

Effect of Dust Deposition on Yield and Yield Components of Chickpea (Cicer arietinum L. under Rain Fed and Supplemental Irrigation Conditions in Kermanshah

Directory of Open Access Journals (Sweden)

hamze felegari

2017-10-01

of poding stage and Washing at the end of vegetative and poding stages. Experiment was a randomized complete block design with three replications. The Analysis of variance using SAS softwares was performed for studied parameters. The means were compared using Duncan test at level of 0.05 probabilities. Results and Discussion Dust particles deposited on chickpea leaves resulted in the reduction of the total dry matter and seed yield. Interaction of supplemental irrigation and dust deposition on biological yield, seed yield, harvest index, number of seeds per plant, number of pods per plant and number of lateral branches were significant. The highest biological and seed yield were obtained due to the interaction of Supplemental irrigation and Control (no dust deposition with 341 and 144 g.m-2, respectively. Zia-Khan et al., (2015 reported the mean reduction of yield in the dusted treatment was about 28%, indicating that the stress conditions in this experiment were relatively severe. Chaurasi et al (2013 reported a decrease in dry matter of groundnut planted in the vicinity of a cement factory, and an increasing rate of groundnut dry matter accumulation was observed while the distance of farm and factory increased.. By cleaning the dust particles of the leaves at the end of growth and poding stages, carbon assimilation and finally grain yield slightly increased. This findings are also according to Zia-khan et al., 2014. Chouhan & Joshi (2010 reported that the growth of wheat at 0.5km distance from a Cement industry was lesser than to plants farther from the cement industry. Armbrust, (1986 Reported a decrease in dry matter accumulation after three days of dust application. Conclusions According to the results of this experiment, the drought stress and the dust deposition on leaf surfaces, cause a reduction in light absorption of leaves, reduction stomata conductance, photosynthesis and transpiration and increase leaf temperature. The results of this study show that
12 CFR 741.4 - Insurance premium and one percent deposit.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 6 2010-01-01 2010-01-01 false Insurance premium and one percent deposit. 741... Insurance premium and one percent deposit. (a) Scope. This section implements the requirements of Section... payment of an insurance premium. (b) Definitions. For purposes of this section: (1) Available assets ratio...
Effects of physical agitation on yield of greenhouse-grown soybean

Science.gov (United States)

Jones, R. S.; Mitchell, C. A.

1992-01-01

Agronomic and horticultural crop species experience reductions in growth and harvestable yield after exposure to physical agitation (also known as mechanical stress), as by wind or rain. A greenhouse study was conducted to test the influence of mechanical stress on soybean yield and to determine if exposure to mechanical stress during discrete growth periods has differential effects on seed yield. A modified rotatory shaker was used to apply seismic (i.e., shaking) stress. Brief, periodic episodes of seismic stress reduced stem length, total seed dry weight, and seed number of soybean [Glycine max (L.) Merr.]. Lodging resistance was greater for plants stressed during vegetative growth or throughout vegetative and reproductive growth than during reproductive growth only. Seed dry weight yield was reduced regardless of the timing or duration of stress application, but was lowest when applied during reproductive development. Seismic stress applied during reproductive growth stages R1 to R2 (Days 3 to 4) was as detrimental to seed dry weight accumulation as was stress applied during growth stages R1 to R6 (Days 39 to 42). Seed dry weight per plant was highly correlated with seed number per plant, and seed number was correlated with the seed number of two- and three-seeded pods. Dry weight per 100 seeds was unaffected by seismic-stress treatment. Growth and yield reductions resulting from treatments applied only during the vegetative stage imply that long-term mechanical effects were induced, from which the plants did not fully recover. It is unclear which yield-controlling physiological processes were affected by mechanical stress. Both transient and long-term effects on yield-controlling processes remain to be elucidated.
Extrusion of the uranium-0.75 weight percent titanium alloy

International Nuclear Information System (INIS)

Jackson, R.J.; Lundberg, M.R.; Boland, J.F.

1975-01-01

Procedures are described for extruding the U--0.75 wt percent Ti alloy in the high alpha region (600 to 640 0 C) , and in the upper gamma region (900 to 1000 0 C). The casting of sound extrusion billets has importance in the production of sound extrusions, and procedures are given for casting sound billets up to 1,100 kilograms . Also important in producing sound extrusions is the use of glass lubricants. Reduction ratios of greater than 50 to 1 were achieved on reasonably sized billets. Extrusion constants of 48,000 pounds per square inch (psi) [296 megapascals (MPa)] for alpha phase (630 0 C) and 8,000 psi (56 MPa) for gamma phase (950 0 C) were achieved. Gamma-phase extrusion has preference over alpha-phase extrusion in that larger billets can be used and temperature control is not as critical. However alpha-phase extrusion offers better surface finish, less die wear, and fewer oxidation problems. Billets up to 14 inches in diameter have been successfully gamma-extruded and plans exist for extruding billets up to 20 inches (508 millimetres) in diameter. (U.S.)
Matter power spectrum and the challenge of percent accuracy

International Nuclear Information System (INIS)

Schneider, Aurel; Teyssier, Romain; Potter, Doug; Stadel, Joachim; Reed, Darren S.; Onions, Julian; Pearce, Frazer R.; Smith, Robert E.; Springel, Volker; Scoccimarro, Roman

2016-01-01

Future galaxy surveys require one percent precision in the theoretical knowledge of the power spectrum over a large range including very nonlinear scales. While this level of accuracy is easily obtained in the linear regime with perturbation theory, it represents a serious challenge for small scales where numerical simulations are required. In this paper we quantify the precision of present-day N -body methods, identifying main potential error sources from the set-up of initial conditions to the measurement of the final power spectrum. We directly compare three widely used N -body codes, Ramses, Pkdgrav3, and Gadget3 which represent three main discretisation techniques: the particle-mesh method, the tree method, and a hybrid combination of the two. For standard run parameters, the codes agree to within one percent at k ≤1 h Mpc −1 and to within three percent at k ≤10 h Mpc −1 . We also consider the bispectrum and show that the reduced bispectra agree at the sub-percent level for k ≤ 2 h Mpc −1 . In a second step, we quantify potential errors due to initial conditions, box size, and resolution using an extended suite of simulations performed with our fastest code Pkdgrav3. We demonstrate that the simulation box size should not be smaller than L =0.5 h −1 Gpc to avoid systematic finite-volume effects (while much larger boxes are required to beat down the statistical sample variance). Furthermore, a maximum particle mass of M p =10 9 h −1 M ⊙ is required to conservatively obtain one percent precision of the matter power spectrum. As a consequence, numerical simulations covering large survey volumes of upcoming missions such as DES, LSST, and Euclid will need more than a trillion particles to reproduce clustering properties at the targeted accuracy.
Determination of expected alcohol yield from molasses by laboratory fermentation

Energy Technology Data Exchange (ETDEWEB)

Medintseva, L L

1960-01-01

Molasses (750 g, 18 to 19% dry weight) in 31 media, supplemented with nutrients was fermented with the industrial yeast strain. The expected alcohol yield was calculated for 1 kg conventional starch as B = V/P..pi.. 0.95, where V is the amount of alcohol distilled from the fermented medium in ml, P is the weight of molasses in g, is the fermentable sugar content of the molasses in percent, and 0.95 is the conversion factor from sucrose to starch.
Effect of Mulch and Water Stress on Some Physiological Traits, Yield Components and Grain Yield of Red Kidney bean (Phaseolus vulgaris L.

Directory of Open Access Journals (Sweden)

R Amini

2016-02-01

Full Text Available Introduction Water use in agricultural production as one of the most important environmental factors affecting plant growth and development, especially in arid and semi-arid climatic conditions of Iran is of special importance (21. One of the ways of alleviating water scarcity is by enhancing its use efficiency or productivity. Improving water use efficiency in arid and semi-arid areas depends on effective conservation of moisture and efficient use of limited water. Mulching is one of the management practices for increasing water use efficiency (WUE . Straw mulch is commonly used as mulch. Straw mulching has potential for increasing soil water storage (16. Mulches modify the microclimate and growing conditions of crops (16, conserve more water and increase water use efficiency (34. Red kidney bean (Phaseolus vulgaris L. is the most important food legume (25 and is an important source of proteins and minerals (28. The majority of red kidney bean production is under drought conditions, and thus yield reductions due to drought are very common (29. This research was carried out to evaluate the effect of wheat straw mulch and water stress on physiological traits, yield components and grain yield of red kidney bean cultivars. Materials and Methods A field experiment was conducted in 2012 at the Research Farm of the Faculty of Agriculture, University of Tabriz, Iran (latitude 38°05_N, longitude 46°17_E, altitude 1360 m above sea level. In order to investigate the effect of mulch on grain yield and yield components of red kidney bean (Phaseolus vulgaris L. cultivars at different water stress treatments, a factorial experiment was conducted based on RCB design with three replications. The factors were including water stress treatment (I1 and I2, irrigation after 60 and 120 mm evaporation from class A pan, respectively; mulch application at two levels (M1: (no mulch and M2: 2 ton ha-1 wheat straw mulch and red kidney bean cultivars including Akhtar and
Simulating crop yield losses in Switzerland for historical and present Tambora climate scenarios

Science.gov (United States)

Flückiger, Simon; Brönnimann, Stefan; Holzkämper, Annelie; Fuhrer, Jürg; Krämer, Daniel; Pfister, Christian; Rohr, Christian

2017-07-01

Severe climatic anomalies in summer 1816, partly due to the eruption of Tambora in April 1815, contributed to delayed growth and poor harvests of important crops in Central Europe. Coinciding with adverse socio-economic conditions, this event triggered the last subsistence crisis in the western World. Here, we model reductions in potential crop yields for 1816 and 1817 and address the question, what impact a similar climatic anomaly would have today. We reconstructed daily weather for Switzerland for 1816/17 on a 2 km grid using historical observations and an analogue resampling method. These data were used to simulate potential crop yields for potato, grain maize, and winter barley using the CropSyst model calibrated for current crop cultivars. We also simulated yields for the same weather anomalies, but referenced to a present-day baseline temperature. Results show that reduced temperature delayed growth and harvest considerably, and in combination with reduced solar irradiance led to a substantial reduction (20%-50%) in the potential yield of potato in 1816. Effects on winter barley were smaller. Significant reductions were also modelled for 1817 and were mainly due to a cold late spring. Relative reductions for the present-day scenario for the two crops were almost indistinguishable from the historical ones. An even stronger response was found for maize, which was not yet common in 1816/17. Waterlogging, which we assessed using a stress-day approach, likely added to the simulated reductions. The documented, strong east-west gradient in malnutrition across Switzerland in 1817/18 could not be explained by biophysical yield limitations (though excess-water limitation might have contributed), but rather by economic, political and social factors. This highlights the importance of these factors for a societies’ ability to cope with extreme climate events. While the adaptive capacity of today’s society in Switzerland is much greater than in the early 19th century
Reduction of UF4 to U metal

International Nuclear Information System (INIS)

Suh, I.S.; Kim, J.H.; Min, B.T.; Whang, S.C.; Im, K.S.

1983-01-01

The operating conditions for the production of uranium metal by reduction of UFsub(4) with magnesium powder have been thoroughly investigated using the reactor 1 Kg nominal capacity. UFsub(4) powders which were produced from the conversion plant in KAERI are used and MgFsub(2), by-product of the reduction, are used as liner after pulverizing. 95% of average yield of uranium metal are obtained with 6% excess of magnesium powder in size of -πo + 50 mesh and its density is 18.5 g/cc, and furthermore the yield is increased when mafnesium powders are used after washed with trichloro-ethylene and dried. (Author)
Sugarcane yield estimation for climatic conditions in the state of Goiás

Directory of Open Access Journals (Sweden)

Jordana Moura Caetano

Full Text Available ABSTRACT Models that estimate potential and depleted crop yield according to climatic variable enable the crop planning and production quantification for a specific region. Therefore, the objective of this study was to compare methods to sugarcane yield estimates grown in the climatic condition in the central part of Goiás, Brazil. So, Agroecological Zone Method (ZAE and the model proposed by Scarpari (S were correlated with real data of sugarcane yield from an experimental area, located in Santo Antônio de Goiás, state of Goiás, Brazil. Data yield refer to the crops of 2008/2009 (sugarcane plant, 2009/2010, 2010/2011 and 2011/2012 (ratoon sugarcane. Yield rates were calculated as a function of atmospheric water demand and water deficit in the area under study. Real and estimated yields were adjusted in function of productivity loss due to cutting stage of sugarcane, using an average reduction in productivity observed in the experimental area and the average reduction in the state of Goiás. The results indicated that the ZAE method, considering the water deficit, displayed good yield estimates for cane-plant (d > 0.90. Water deficit decreased the yield rates (r = -0.8636; α = 0.05 while the thermal sum increased that rate for all evaluated harvests (r > 0.68; α = 0.05.
49 CFR 173.182 - Barium azide-50 percent or more water wet.

Science.gov (United States)

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Barium azide-50 percent or more water wet. 173.182 Section 173.182 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS... Class 1 and Class 7 § 173.182 Barium azide—50 percent or more water wet. Barium azide—50 percent or more...
Redução da área foliar e o rendimento do pepino japonês Leaf area reduction and the yield of the japanese cucumber

Directory of Open Access Journals (Sweden)

Edson Shigueaki Nomura

2000-06-01

Full Text Available Para verificar o efeito da redução da área foliar sobre a produção e qualidade dos frutos de pepino japonês (híbrido Hokuho nº 2, enxertado sobre abóbora 'Excite Ikky' cultivado em ambiente protegido, foram avaliados seis tratamentos com cinco repetições e cinco plantas por parcela, no delineamento experimental em blocos ao acaso. O tratamento 1 foi constituído por plantas com crescimento livre; no tratamento 2 (padrão as plantas foram conduzidas com desbrotas nos ramos laterais; no tratamento 3 as plantas foram conduzidas semelhante ao padrão, mas com eliminação de frutos tortos ainda jovens (In order to verify the defoliation effect on yield and quality of japanese cucumber ('Hokuho' grafted over 'Excite Ikky' squash under protected cultivation, five replicates of five plants per plot were used to evaluate six treatments in a randomized block design. Treatment 1 consisted of free growth plants; treatment 2 (standard of disprouted plants; treatment 3, young curved fruits (<5 cm removed; treatments 4, 5 and 6, plants removing 25%, 50% and 75% of their leaves, respectively. There were no differences in plant height, but plants of treatments 5 and 6 had greater number of nodes per plant, although they were smaller and less vigorous, presenting a smaller number of sproutings. Despite having plants with higher total yield, in treatment 1, most of them were curved and the harvest was more difficult. Plants of treatment 3 had a greater commercial yield, because all the young curved fruits were removed and the plants compensated their yield, producing other fruits with better quality and plants had better sprouting. The higher the defoliation level the greater was the yield reduction.
Soil Moisture Anomaly as Predictor of Crop Yield Deviation in Germany

Science.gov (United States)

Peichl, Michael; Thober, Stephan; Schwarze, Reimund; Meyer, Volker; Samaniego, Luis

2016-04-01

indicate that wet and dry soil moisture anomalies have a causal effect on crop yields. However, the effects vary in magnitude and direction for each crop depending on the month. For instance dry soil moisture anomalies in July, August and September reduce silo maize yield more than ten percent with respect to average conditions. Extreme wetness, however, increases silo maize yield in the same time period. A negative effect is observed for winter wheat during this period for both wet and dry anomalies. The reduction due to dry anomalies is smaller for winter wheat than for silo maize. This study shows that the impact of soil moisture anomalies varies dependent on months and crops. These evolving patterns provide new insights to improve adaptation measures for extreme soil moisture conditions. References Auffhammer, M., and W. Schlenker. 2014. "Empirical studies on agricultural impacts and adaptation." Energy Economics 46:555-561. COPA-COGECA. 2003. "Assessment of the impact of the heat wave and drought of the summer 2003 on agriculture and forestry." In Committee of Agricultural Organisations in the European Union General Committee for Agricultural Cooperation in the European Union, Brussels. p. 15.
49 CFR 178.55 - Specification 4B240ET welded or brazed cylinders.

Science.gov (United States)

2010-10-01

... of the testing machine may not exceed 1/8 inch per minute during yield strength determination. (l... test must be conducted to determine yield strength, tensile strength, elongation, and reduction of area... cases and a yield strength not over 73 percent of tensile strength. In this instance the flattening test...
Growth and yield of different brassica genotypes under saline sodic conditions

International Nuclear Information System (INIS)

Ali, A.; Mahmood, I.A.; Salim, M.

2013-01-01

A field study was conducted at farmer's salt-affected field (ECe=12.3 dS m/sup -1/; pH=9.7; SAR=46.2) in Hafizabad to test growth and yield response of six Brassica cultivars (BARD-I, Dunkled, Rainbow, BRS-II, Sultan Raya and cv. 95102-5) under saline sodic conditions. Data on growth and yield parameters were collected randomly (average of five plants per replication) at the time of crop maturity. Ionic concentration in plant tissues and oil content in seeds were also determined. Comparatively more number of branches and pods per plant were produced by cultivar Dunkled closely followed by BARD-I while maximum seed yield (241.7 and 235.1 kg ha ) was obtained from Dunkled and Sultan Raya, respectively which was statistically at par. However, BRS-II and Rainbow showed significantly more percent oil contents in their seeds but genotype Dunkled showed minimum Na+ and K+ concentration in their tissues. (author)
Effects of Different Agricultural Wastes on Some Growth Factors, Yield and Crude Polysaccharide Content of Fruit of “Reishi” A Medicinal Mushroom

Directory of Open Access Journals (Sweden)

Masoud Azimi

2017-02-01

, biological yield andcrude polysaccharide content and polysaccharide contents of fruits. Material and Methods:The main portion of the medium for production of Ganodermalucidum was wood chips as 5-10 mm long that supplemented with different agricultural wastes included black seed waste, tea waste, hazelnut waste, coconut waste, almond wasteand sesame waste, with two types of bran (wheat and rice. The statistical design was afactorial experiment on the basis of completely randomized design with threereplications. The treatment were included Wood chips (80 percent + black seed waste (10 percent + rice bran (10 percent Wood chips (80 percent + tea waste (10 percent + rice bran (10 percent Wood chips (80 percent + sesame waste (10 percent + rice bran (10 percent Wood chips (80 percent + hazelnut waste (10 percent + rice bran (10 percent Wood chips (80 percent + coconut waste (10 percent + rice bran (10 percent Wood chips (80 percent + black seed waste (10 percent + wheat bran (10 percent Wood chips (80 percent + almond waste (10 percent + wheat bran (10 percent Wood chips (80 percent + sesame waste (10 percent + wheat bran (10 percent Wood chips (80 percent + hazelnut waste (10 percent + wheat bran (10 percent Wood chips (80 percent + coconut waste (10 percent + wheat bran (10 percent At first Wood chips soaked in water for 2 days until the their moisture reached60-65 then the other agricultural waste materials added on the basis of the treatments and the autoclavable propylene bags filledwith the mixture and autoclaved for 2 hours at 121ºC. After cooling, all bags inoculated with wheat spawn of the Ganodermalucidium and the bags putunderdark condition in growth chamber with 85-95% humidity at 30ºC. After full colonization of the bags, they transfer to the light condition (200-500 Lux at 25ºC until primordial formation. Then the light increased to 500-700 Lux until fruiting body formation. Results and Discussion: The results of analysis of variance showed that the use of these
Effect of Timing of Potassium Application on Millet (Setaria italica Yield and Grain Protein Content in Different Irrigation Regimes

Directory of Open Access Journals (Sweden)

A. Hayati

2011-05-01

Full Text Available The research on reducing the water consumption in conventional cropping system is one of the important strategies to improve the water use efficiency in agriculture. In order to investigate the effect of time of potassium application under different irrigation regimes on millet grain yield and protein percent, a field experiment was carried out in Agricultural Research Center of Yasuj, Iran, in 2009. The experiment was conducted as split plot design in a randomized complete blocks design with 3 replications. Irrigation regime included 7, 14 and 21-day intervals as main factor and sub-plots included time of potassium fertilizer application in four stages: planting, tillering, stem development and flowering. The results showed that the effect of irrigation interval was significant on 1000-seed weight, grain and biological yield, number of grains per spike, harvest index, protein content, and chlorophyll a, b and total of leaves. By increasing the irrigation interval, all the above-mentioned traits decreased, except the protein percent that increased. The 1000-seed weight, grain and biological yield, harvest index and protein content were affected significantly by the time of potassium application. Maximum grain yield was obtained by interaction of 7- day irrigation interval and potassium application at the stem development stage. Maximum grain protein content was measured in potassium application at flowering stage. In general, increasing the irrigation interval, and subsequent water stress, reduced plant growth and yield components. Application of potassium fertilizer at early growth stages increased yield and yield components, while in reproductive stages increased seed quality.
HVM die yield improvement as a function of DRSEM ADC

Science.gov (United States)

Maheshwary, Sonu; Haas, Terry; McGarvey, Steve

2010-03-01

Given the current manufacturing technology roadmap and the competitiveness of the global semiconductor manufacturing environment in conjunction with the semiconductor manufacturing market dynamics, the market place continues to demand a reduced die manufacturing cost. This continuous pressure on lowering die cost in turn drives an aggressive yield learning curve, a key component of which is defect reduction of manufacturing induced anomalies. In order to meet and even exceed line and die yield targets there is a need to revamp defect classification strategies and place a greater emphasize on increasing the accuracy and purity of the Defect Review Scanning Electron Microscope (DRSEM) Automated Defect Classification (ADC) results while placing less emphasis on the ADC results of patterned/un-patterned wafer inspection systems. The increased emphasis on DRSEM ADC results allows for a high degree of automation and consistency in the classification data and eliminates variance induced by the manufacturing staff. This paper examines the use of SEM based Auto Defect Classification in a high volume manufacturing environment as a key driver in the reduction of defect limited yields.
Effect of Black and Clear Polyethylene Mulch on Yield and Yield Components of Melon in Salinity Stress Condition

Directory of Open Access Journals (Sweden)

Peyman Jafari

2017-02-01

Full Text Available Introduction: The term of Mulch, is the German word (Molsh means the soft, however, not soft, and made of plant debris or synthetic substances. Many positive effects attributed to the use of plastic mulch such as adjusting the temperature in the root environment, conserve moisture, reduce weeds, increase root growth, reduce soil erosion, and soil condensation and improve germination and early plant establishment. The use of mulch can reduce the harmful effects of salt in plants. Materials and Methods: To evaluate the effects of black and clear polyethylene mulch on yield and yield components of melon in salinity stress condition, a study was conducted in 2011 using split plot randomized based on complete block design with three replications in Varamin region. Three salinity levels of irrigation water of 2, 5 and 8 dS-1 as main factor and three plastic mulch treatments (no mulch, clear mulch and black mulch were considered as sub-plots. At harvest and after determining the yield and number of fruits harvested from each plot, the average number of fruits per plant was measured and fruit pulp thickness was recorded with calipers. Results Discussion The results showed interactive effects of salinity and mulch on fruit yield, number of fruits per plant, average fruit weight, fruit length, days to first harvest and fruit soluble solids percentage were statistically significant. In salinity levels of 2, 5 and 8 dS m-1, fruit yield increased, respectively, 19.6, 59, and 45.4 %in clear mulch compared to control. Similarly these increases for the black mulch were equal to 15.7, 41.9, and 21.4 percent, respectively. With 2, 5 and 8 dS m-1 salinity levels, fruit yield in the first harvest were 7.44, 7.72, and 6.98 t ha -1, respectively, which was significantly higher than without mulch and black mulch. Mulch can reduce evaporation and increase the level of moisture in the soil and thereby dilute the salt and reduce the harmful effects of salinity. Some
Smelting reduction of MgO in molten slag by liquid ferrosilicon

Energy Technology Data Exchange (ETDEWEB)

Tang, Q.; Gao, J.; Chen, X.; Wei, X.

2016-10-01

The smelting reduction of magnesium oxide was researched in this paper. The effect of molten slag composition and reduction temperature on percent reduction of magnesium oxide were discussed, and kinetics of smelting reduction of magnesium oxide in molten slag was studied. The results showed that the reduction extent of magnesium oxide increased by increasing either one of the following factors: the initial mass ratio of Al{sub 2}O{sub 3}/SiO{sub 2}, the addition of CaF{sub 2}, the initial molar ratio of Si/2MgO, and reaction temperature. The overall smelting reduction was controlled by mass transfer in slag with an apparent activation energy 586 kJ mol{sup -}1. (Author)

Accurate quantum yields by laser gain vs absorption spectroscopy - Investigation of Br/Br(asterisk) channels in photofragmentation of Br2 and IBr

Science.gov (United States)

Haugen, H. K.; Weitz, E.; Leone, S. R.

1985-01-01

Various techniques have been used to study photodissociation dynamics of the halogens and interhalogens. The quantum yields obtained by these techniques differ widely. The present investigation is concerned with a qualitatively new approach for obtaining highly accurate quantum yields for electronically excited states. This approach makes it possible to obtain an accuracy of 1 percent to 3 percent. It is shown that measurement of the initial transient gain/absorption vs the final absorption in a single time-resolved signal is a very accurate technique in the study of absolute branching fractions in photodissociation. The new technique is found to be insensitive to pulse and probe laser characteristics, molecular absorption cross sections, and absolute precursor density.
The buffer value of groundwater when well yield is limited

Science.gov (United States)

Foster, T.; Brozović, N.; Speir, C.

2017-04-01

A large proportion of the total value of groundwater in conjunctive use systems is associated with the ability to smooth out shortfalls in surface water supply during droughts. Previous research has argued that aquifer depletion in these regions will impact farmers negatively by reducing the available stock of groundwater to buffer production in future periods, and also by increasing the costs of groundwater extraction. However, existing studies have not considered how depletion may impact the productivity of groundwater stocks in conjunctive use systems through reductions in well yields. In this work, we develop a hydro-economic modeling framework to quantify the effects of changes in well yields on the buffer value of groundwater, and apply this model to an illustrative case study of tomato production in California's Central Valley. Our findings demonstrate that farmers with low well yields are forced to forgo significant production and profits because instantaneous groundwater supply is insufficient to buffer surface water shortfalls in drought years. Negative economic impacts of low well yields are an increasing function of surface water variability, and are also greatest for farmers operating less efficient irrigation systems. These results indicate that impacts of well yield reductions on the productivity of groundwater are an important economic impact of aquifer depletion, and that failure to consider this feedback may lead to significant errors in estimates of the value of groundwater management in conjunctive use systems.
Exposure reduction in panoramic radiography

International Nuclear Information System (INIS)

Kapa, S.F.; Platin, E.

1990-01-01

Increased receptor speed in panoramic radiography is useful in reducing patient exposure if it doesn't substantially decrease the diagnostic quality of the resultant image. In a laboratory investigation four rare earth screen/film combinations were evaluated ranging in relative speed from 400 to 1200. The results indicated that an exposure reduction of approximately 15 percent can be achieved by substituting a 1200 speed system for a 400 speed system without significantly affecting the diagnostic quality of the image
Effects of Super-Absorbent Polymer Application on Yield and Yield Components of Rapeseed (Brassica napus L.

Directory of Open Access Journals (Sweden)

Fariborz SHEKARI

2015-09-01

Full Text Available Limitation of water resources and its great impact on agricultural and natural resources play a crucial role in the efficiency of water use. Applying super absorbent polymer to the soil may be one of the methods to minimize the stress of weather dryness in arid and semi-arid regions. In order to evaluate the effects of hydrophilic polymer application on yield and water use efficiency of rapeseed plants, an experiment was conducted under field condition in 2012 at the Research Farm of the Faculty of Agriculture, University of Maragheh. Treatments’ factors were: (i 3 super absorbent polymers (SAP (Taravat A200 levels of 0 (without application, 75 and 150 kg ha-1 A200 application, (ii three irrigation levels of 80, 120 and 180 mm evaporation from class A basin in main plots, (iii two cultivars ʻHyola 401ʼ and ʻRVSʼ in sub plots as factorial split plot combination based on completely randomized block design with three replications. The results showed that in all of the measured traits within the experiment there were significant differences between SAP levels. Furthermore, increasing irrigation interval led to an increase in a thousand seeds’ weight, but decreased seed yield. Increasing water stress raised seed oil percent and infertile silique and subsequently resulted in reduced oil yield. ʻHyola 401ʼ was more susceptible to embryo abortion compared with ʻRVSʼ. As a conclusion of the research, SAP (A200 application in quantities smaller than 75 kg ha-1 may be recommended for rapeseed production under field condition.
Effect of Different Levels of Nitrogen Fertilizer and Vermi-Compost on Yield and Quality of Sweet Corn (Zea mays Hybrid Chase

Directory of Open Access Journals (Sweden)

S. Habibi

2014-04-01

Full Text Available In order to investigate the effect of source and rate of nitrogen fertilizer on yield and quality of sweet corn, a field study was conducted in 2011 cropping season in Agriculture Experiment Station of College of Agriculture, University of Guilan. A randomized complete block design with three replications was used. Treatment consisted of four levels of nitrogen fertilizer (0, 46, 92 and 138 kg N ha-1 and integrated N of chemical and biological (23 kg N ha-1 + 1 ton ha-1 Vermi-compost, 46 kg N ha-1 + 2 ton ha-1 Vermi-compost, and 69 kg N ha-1 +3 ton ha-1 Vermi-compost and organic sources (2, 4 and 6 ton ha-1. Effect of source and rate of nitrogen fertilizer on fresh ear yield, grain yield canned, grain protein amount and dry matter digestibility percent had significant. With increscent nitrogen at treatments nitrogen fertilizer, organic ant integrated farming yield fresh ear, grain yield, grain protein amount and dry matter digestibility percent increased. Maximum yield fresh ear was obtained with 69 kg N ha-1 + 3 ton ha-1 Vermi-compost with an average 14595.9 kg ha-1. Maximum forage yield and dry forage yield obtained with an average 18619.5 and 3593 kg ha-1 at treatment with 69 kg N ha-1 + 3 ton ha-1 Vermi-compost. Results of this research showed that the best grain yield and quality, and forage yield and quality of sweet corn were obtained in integrated farming and organic methods in Rasht region conditions and same climatology conditions.
Measurements of the neutron yield from a coaxial gun plasma

International Nuclear Information System (INIS)

Zolototrubov, I.M.; Krasnikov, A.A.; Kurishchenko, A.M.; Novikov, Yu.M.; Poryatuj, V.S.; Tolstolutskij, A.G.

1977-01-01

Neutron yield from deuterium plasma produced by a pulse coaxial accelerator was measured. The maximum neutron yield with 5 kj stored in a condenser battery is 3x10 6 neutron/pulse. The basis of the method of measuring neutron yield from the plasma was through the induced activity. It was shown that application of even a small uniform longitudinal magnetic field (up to 1 kOe) on the accelerator decreases several times the neutron yield. It is also shown that a small amount of stored discharge energy can produce high-temperature plasma at the output of pulse coaxial accelerator in the absense of the direct magnetic field. It is supposed that the reason for the reduction of neutron yield level in the case of applying the magnetic field is decreasing plasma density because of increasing the bunch cross-section
analysis of profitability and poverty reduction of yoghurt processing

African Journals Online (AJOL)

Admin

KEY WORDS: Profitability, poverty reduction, yoghurt, processing, employment ... 70% percent of the rural working population (Joshua,. 1999). With about 76 out of every 120 people living ... traditionally the difference between total revenue and ... (70%) of the respondents were males while 30% were females. The age ...
Nitrite reduction mechanism on a Pd surface.

Science.gov (United States)

Shin, Hyeyoung; Jung, Sungyoon; Bae, Sungjun; Lee, Woojin; Kim, Hyungjun

2014-11-04

Nitrate (NO3-) is one of the most harmful contaminants in the groundwater, and it causes various health problems. Bimetallic catalysts, usually palladium (Pd) coupled with secondary metallic catalyst, are found to properly treat nitrate-containing wastewaters; however, the selectivity toward N2 production over ammonia (NH3) production still requires further improvement. Because the N2 selectivity is determined at the nitrite (NO2-) reduction step on the Pd surface, which occurs after NO3- is decomposed into NO2- on the secondary metallic catalyst, we here performed density functional theory (DFT) calculations and experiments to investigate the NO2- reduction pathway on the Pd surface activated by hydrogen. Based on extensive DFT calculations on the relative energetics among ∼100 possible intermediates, we found that NO2- is easily reduced to NO* on the Pd surface, followed by either sequential hydrogenation steps to yield NH3 or a decomposition step to N* and O* (an adsorbate on Pd is denoted using an asterisk). Based on the calculated high migration barrier of N*, we further discussed that the direct combination of two N* to yield N2 is kinetically less favorable than the combination of a highly mobile H* with N* to yield NH3. Instead, the reduction of NO2- in the vicinity of the N* can yield N2O* that can be preferentially transformed into N2 via diverse reaction pathways. Our DFT results suggest that enhancing the likelihood of N* encountering NO2- in the solution phase before combination with surface H* is important for maximizing the N2 selectivity. This is further supported by our experiments on NO2- reduction by Pd/TiO2, showing that both a decreased H2 flow rate and an increased NO2- concentration increased the N2 selectivity (78.6-93.6% and 57.8-90.9%, respectively).
Pediatric radiology fellows' experience with intussusception reduction

International Nuclear Information System (INIS)

Stein-Wexler, Rebecca; Bateni, Cyrus; Wootton-Gorges, Sandra L.; Li, Chin-Shang

2011-01-01

Intussusception reduction allows young children to avoid surgery. However, graduating residents have had relatively little training in intussusception reduction and, for the most part, consider themselves ill-prepared to perform this procedure. The goal of this study was to assess the extent of training in intussusception reduction during one year of a pediatric radiology fellowship and to determine whether graduating fellows consider themselves adequately trained in this technique. Pediatric radiology fellows were surveyed during June 2010 and asked to characterize their fellowship, to indicate the number of intussusception reductions performed (both the total number and those performed with faculty oversight but without active faculty involvement), and to assess the adequacy of their training. There were 31 responses, representing almost 1/3 of current fellows. Pediatric radiology fellows perform on average 6.9 reductions, 3.8 of which are with faculty oversight but without active faculty involvement. Ninety percent consider themselves well-trained in the technique, whereas 10% are uncertain (none consider their training inadequate). Almost all pediatric radiology fellows consider their training in intussusception reduction to be adequate. (orig.)
Practical methods of dose reduction to the bladder wall

International Nuclear Information System (INIS)

Smith, E.M.; Warner, G.G.

1976-01-01

The radiation dose to the bladder wall following the administration of radionuclides to patients can be reduced by a factor between 25 percent and 75 percent when the effective half-life for the radioactivity entering the urine is two hours or less. A significant but smaller reduction in dose to the gonads may also be achieved in situations where the major fraction of the administered activity is rapidly excreted in the urine. This reduction in dose is achieved by ensuring that the patient has between 50 and 150 ml of urine in his bladder when the radioactivity is injected, and is encouraged to void between one and two hours after the activity has been administered. The interrelationship of voiding schedule, effective half-life, initial urine volume, and demand urination has been analyzed in these studies. In addition, the significance of the rate of urine production and volume of urine in the bladder on the radiation dose to the bladder is demonstrated
MISSE 2 PEACE Polymers Experiment Atomic Oxygen Erosion Yield Error Analysis

Science.gov (United States)

McCarthy, Catherine E.; Banks, Bruce A.; deGroh, Kim, K.

2010-01-01

Atomic oxygen erosion of polymers in low Earth orbit (LEO) poses a serious threat to spacecraft performance and durability. To address this, 40 different polymer samples and a sample of pyrolytic graphite, collectively called the PEACE (Polymer Erosion and Contamination Experiment) Polymers, were exposed to the LEO space environment on the exterior of the International Space Station (ISS) for nearly 4 years as part of the Materials International Space Station Experiment 1 & 2 (MISSE 1 & 2). The purpose of the PEACE Polymers experiment was to obtain accurate mass loss measurements in space to combine with ground measurements in order to accurately calculate the atomic oxygen erosion yields of a wide variety of polymeric materials exposed to the LEO space environment for a long period of time. Error calculations were performed in order to determine the accuracy of the mass measurements and therefore of the erosion yield values. The standard deviation, or error, of each factor was incorporated into the fractional uncertainty of the erosion yield for each of three different situations, depending on the post-flight weighing procedure. The resulting error calculations showed the erosion yield values to be very accurate, with an average error of 3.30 percent.
Matter power spectrum and the challenge of percent accuracy

Energy Technology Data Exchange (ETDEWEB)

Schneider, Aurel; Teyssier, Romain; Potter, Doug; Stadel, Joachim; Reed, Darren S. [Institute for Computational Science, University of Zurich, Winterthurerstrasse 190, 8057 Zurich (Switzerland); Onions, Julian; Pearce, Frazer R. [School of Physics and Astronomy, University of Nottingham, Nottingham NG7 2RD (United Kingdom); Smith, Robert E. [Department of Physics and Astronomy, University of Sussex, Brighton, BN1 9QH (United Kingdom); Springel, Volker [Heidelberger Institut für Theoretische Studien, 69118 Heidelberg (Germany); Scoccimarro, Roman, E-mail: aurel@physik.uzh.ch, E-mail: teyssier@physik.uzh.ch, E-mail: dpotter@physik.uzh.ch, E-mail: stadel@physik.uzh.ch, E-mail: julian.onions@nottingham.ac.uk, E-mail: reed@physik.uzh.ch, E-mail: r.e.smith@sussex.ac.uk, E-mail: volker.springel@h-its.org, E-mail: Frazer.Pearce@nottingham.ac.uk, E-mail: rs123@nyu.edu [Center for Cosmology and Particle Physics, Department of Physics, New York University, NY 10003, New York (United States)

2016-04-01

Future galaxy surveys require one percent precision in the theoretical knowledge of the power spectrum over a large range including very nonlinear scales. While this level of accuracy is easily obtained in the linear regime with perturbation theory, it represents a serious challenge for small scales where numerical simulations are required. In this paper we quantify the precision of present-day N -body methods, identifying main potential error sources from the set-up of initial conditions to the measurement of the final power spectrum. We directly compare three widely used N -body codes, Ramses, Pkdgrav3, and Gadget3 which represent three main discretisation techniques: the particle-mesh method, the tree method, and a hybrid combination of the two. For standard run parameters, the codes agree to within one percent at k ≤1 h Mpc{sup −1} and to within three percent at k ≤10 h Mpc{sup −1}. We also consider the bispectrum and show that the reduced bispectra agree at the sub-percent level for k ≤ 2 h Mpc{sup −1}. In a second step, we quantify potential errors due to initial conditions, box size, and resolution using an extended suite of simulations performed with our fastest code Pkdgrav3. We demonstrate that the simulation box size should not be smaller than L =0.5 h {sup −1}Gpc to avoid systematic finite-volume effects (while much larger boxes are required to beat down the statistical sample variance). Furthermore, a maximum particle mass of M {sub p}=10{sup 9} h {sup −1}M{sub ⊙} is required to conservatively obtain one percent precision of the matter power spectrum. As a consequence, numerical simulations covering large survey volumes of upcoming missions such as DES, LSST, and Euclid will need more than a trillion particles to reproduce clustering properties at the targeted accuracy.
United States home births increase 20 percent from 2004 to 2008.

Science.gov (United States)

MacDorman, Marian F; Declercq, Eugene; Mathews, T J

2011-09-01

After a gradual decline from 1990 to 2004, the percentage of births occurring at home increased from 2004 to 2008 in the United States. The objective of this report was to examine the recent increase in home births and the factors associated with this increase from 2004 to 2008. United States birth certificate data on home births were analyzed by maternal demographic and medical characteristics. In 2008, there were 28,357 home births in the United States. From 2004 to 2008, the percentage of births occurring at home increased by 20 percent from 0.56 percent to 0.67 percent of United States births. This rise was largely driven by a 28 percent increase in the percentage of home births for non-Hispanic white women, for whom more than 1 percent of births occur at home. At the same time, the risk profile for home births has been lowered, with substantial drops in the percentage of home births of infants who are born preterm or at low birthweight, and declines in the percentage of home births that occur to teen and unmarried mothers. Twenty-seven states had statistically significant increases in the percentage of home births from 2004 to 2008; only four states had declines. The 20 percent increase in United States home births from 2004 to 2008 is a notable development that will be of interest to practitioners and policymakers. (BIRTH 38:3 September 2011). © 2011, Copyright the Authors. Journal compilation © 2011, Wiley Periodicals, Inc.
Radiology residents' experience with intussusception reduction

International Nuclear Information System (INIS)

Bateni, Cyrus; Stein-Wexler, Rebecca; Wootton-Gorges, Sandra L.; Li, Chin-Shang

2011-01-01

Residents should be exposed to adequate procedural volume to act independently upon completion of training. Informal inquiry led us to question whether residents encounter enough intussusception reductions to become comfortable with the procedure. We sought to determine radiology residents' exposure to intussusception reductions, and whether their experiences vary by region or institution. U.S. radiology residency program directors were asked to encourage their residents to complete a 12-question online survey describing characteristics of their pediatric radiology department, experiences with intussusception reduction, and confidence in their own ability to perform the procedure. Six hundred sixty-four residents responded during the study period. Of those, 308 (46.4%) had not experienced an intussusception reduction, and 228 (34%) had experienced only one or two. Twenty-two percent of fourth-year residents had never experienced an intussusception reduction, and 21% had experienced only one. Among second- through fourth-year residents, only 99 (18.3%) felt confident that they could competently reduce an intussusception (P < 0.0001), and 336 (62.2%) thought they would benefit from a computer-assisted training model simulating intussusception reduction (P < 0.0001). Radiology residents have limited opportunity to learn intussusception reduction and therefore lack confidence. Most think they would benefit from additional training with a computer-simulation model. (orig.)
Effects of land cover change on moisture availability and potential crop yield in the world’s breadbaskets

International Nuclear Information System (INIS)

Bagley, Justin E; Desai, Ankur R; Dirmeyer, Paul A; Foley, Jonathan A

2012-01-01

The majority of the world’s food production capability is inextricably tied to global precipitation patterns. Changes in moisture availability—whether from changes in climate from anthropogenic greenhouse gas emissions or those induced by land cover change (LCC)—can have profound impacts on food production. In this study, we examined the patterns of evaporative sources that contribute to moisture availability over five major global food producing regions (breadbaskets), and the potential for land cover change to influence these moisture sources by altering surface evapotranspiration. For a range of LCC scenarios we estimated the impact of altered surface fluxes on crop moisture availability and potential yield using a simplified linear hydrologic model and a state-of-the-art ecosystem and crop model. All the breadbasket regions were found to be susceptible to reductions in moisture owing to perturbations in evaporative source (ES) from LCC, with reductions in moisture availability ranging from 7 to 17% leading to potential crop yield reductions of 1–17%, which are magnitudes comparable to the changes anticipated with greenhouse warming. The sensitivity of these reductions in potential crop yield to varying magnitudes of LCC was not consistent among regions. Two variables explained most of these differences: the first was the magnitude of the potential moisture availability change, with regions exhibiting greater reductions in moisture availability also tending to exhibit greater changes in potential yield; the second was the soil moisture within crop root zones. Regions with mean growing season soil moisture fractions of saturation >0.5 typically had reduced impacts on potential crop yield. Our results indicate the existence of LCC thresholds that have the capability to create moisture shortages adversely affecting crop yields in major food producing regions, which could lead to future food supply disruptions in the absence of increased irrigation or other
Drag reduction in channel flow using nonlinear control

Science.gov (United States)

Keefe, Laurence R.

1993-01-01

Two nonlinear control schemes have been applied to the problem of drag reduction in channel flow. Both schemes have been tested using numerical simulations at a mass flux Reynolds numbers of 4408, utilizing 2D nonlinear neutral modes for goal dynamics. The OGY-method, which requires feedback, reduces drag to 60-80 percent of the turbulent value at the same Reynolds number, and employs forcing only within a thin region near the wall. The H-method, or model-based control, fails to achieve any drag reduction when starting from a fully turbulent initial condition, but shows potential for suppressing or retarding laminar-to-turbulent transition by imposing instead a transition to a low drag, nonlinear traveling wave solution to the Navier-Stokes equation. The drag in this state corresponds to that achieved by the OGY-method. Model-based control requires no feedback, but in experiments to date has required the forcing be imposed within a thicker layer than the OGY-method. Control energy expenditures in both methods are small, representing less than 0.1 percent of the uncontrolled flow's energy.
Impact of Sowing Date Induced Temperature and Management Practices on Development Events and Yield of Mustard

Directory of Open Access Journals (Sweden)

MSA Khan, MA Aziz

2015-12-01

Full Text Available The experiment was conducted at the research field of the Agronomy Division, Bangladesh Agricultural Research Institute (BARI, Joydebpur, Gazipur, during rabi season of 2014-2015 to find out the relationship between different development events of mustard crop and sowing dates induced temperature as well as to minimize the yield reduction of the crop by adopting appropriate management practices. The mustard var. BARI Sarisha-15 was sown on 06, 25 November and 14 December 2014. Crop accumulated lower growing degree days (GDD i.e., 72.15, 521.10 and 1070 to 1154 °C were observed for the events of emergence, 50 % flowering and maturity on 14 December sowing. Late sown plants took minimum time from flowering to maturity (36 days due to increased temperature and high variability in both maximum and minimum temperature. The highest seed yield (1569 kg ha-1 was recorded from 06 November sowing with high management practices while the lowest seed yield (435 kg ha-1 from 14 December sowing with low management practices. At high management practices the crop yielded 1183 kg ha-1 at 14 December sowing. Yield reduction at late sowing condition was reduced to some extent with high management practices. The seed yield reductions at 14 December sowing as compared to high management practices at 06 November sowing were 72, 43 and 25% under low, medium and high management, respectively.
Fusion yield rate recovery by escaping hot-spot fast ions in the neighboring fuel layer

Science.gov (United States)

Tang, Xian-Zhu; McDevitt, C. J.; Guo, Zehua; Berk, H. L.

2014-02-01

Free-streaming loss by fast ions can deplete the tail population in the hot spot of an inertial confinement fusion (ICF) target. Escaping fast ions in the neighboring fuel layer of a cryogenic target can produce a surplus of fast ions locally. In contrast to the Knudsen layer effect that reduces hot-spot fusion reactivity due to tail ion depletion, the inverse Knudsen layer effect increases fusion reactivity in the neighboring fuel layer. In the case of a burning ICF target in the presence of significant hydrodynamic mix which aggravates the Knudsen layer effect, the yield recovery largely compensates for the yield reduction. For mix-dominated sub-ignition targets, the yield reduction is the dominant process.
Effects of Management Practices on Meloidogyne incognita and Snap Bean Yield.

Science.gov (United States)

Smittle, D A; Johnson, A W

1982-01-01

Phenamiphos applied at 6.7 kg ai/ha through a solid set or a center pivot irrigation system with 28 mm of water effectively controlled root-knot nematodes, Meloidogyne incognita, and resulted in greater snap bean growth and yields irrespective of growing season, tillage method, or cover crop system. The percentage yield increases attributed to this method of M. incognita control over nontreated controls were 45% in the spring crop, and 90% and 409% in the fall crops following winter rye and fallow, respectively. Root galling was not affected by tillage systems or cover crop, but disk tillage resulted in over 50% reduction in bean yield compared with yields from the subsoil-bed tillage system.
Comparison of energy and yield parameters in maize crop

International Nuclear Information System (INIS)

Memon, S.Q.; Mirjat, M.S.; Amjad, N.

2013-01-01

The aim of this study was to determine direct and indirect input energy in maize production and to investigate the efficiency of energy consumption in maize crop. Result showed that emergence percent, plant height, number of grains per cob and grain yield were the highest in deep tillage as compared to conventional and zero tillage. Total energy input and output were the highest in deep tillage with NPK at the rate 150-75-75kg/ha. The net energy gain was found the highest in deep tillage followed by conventional tillage and the lowest net energy gain in zero tillage. (author)

Distribution of assimilates derived from canopy leaves at different milky stage of intergeneric high-yielding hybrid rice

International Nuclear Information System (INIS)

Tang Jianjun

1997-01-01

Distribution characteristics of assimilates derived from 14 C-glucose fed on different canopy leaves of the high-yielding intergeneric hybrid rice Yuanyou 1 and GER-1, intra-varietal 3-line hybrid rice Shanyou 63, maternal and paternal parents of intergeneric hybrid rice at various ripening stage from flowering stage to late milky stage were studied with pot experiments under greenhouse in 1993 and 1994 in Guangzhou. The results indicates that there exists a significant difference in exportation of radioactivity from the leaf fed, partitioning of radioactivity exported into different organs and importation accumulation percent of total radioactivity in the rice panicle Yuanyou 1 has a high average exportation percent, importation accumulation percent and a stable and sustainable grain-filling process, which results in a high seed-setting rate with large spikelet population
The effects of crosscutting before gang-ripping on dimension part yields from no. 1 and 2A common red oak lumber

Science.gov (United States)

Charles, J. Gatchell; Janice K. Wiedenbeck; Elizabeth S. Walker; Elizabeth S. Walker

1996-01-01

Mills should have the option to crosscut red oak lumber prior to gang-ripping to remove crook and worthless material and to take advantage of the quality differences between board ends. At least half of No: 1 and 2A Common red oak boards will have end-to-end yield differences of at least 10 percent. Preprocessing will cause a slight decrease in overall yield but will...
How I Love My 80 Percenters

Science.gov (United States)

Maturo, Anthony J.

2002-01-01

Don't ever take your support staff for granted. By support staff, I mean the people in personnel, logistics, and finance; the ones who can make things happen with a phone call or a signature, or by the same token frustrate you to no end by their inaction; these are people you must depend on. I've spent a lot of time thinking about how to cultivate relationships with my support staff that work to the advantage of both of us. The most important thing that have learned working with people, any people--and I will tell you how I learned this in a minute--is there are some folks you just can't motivate, so forget it, don't try; others you certainly can with a little psychology and some effort; and the best of the bunch, what I call the 80 percenters, you don't need to motivate because they're already on the team and performing beautifully. The ones you can't change are rocks. Face up to it, and just kick them out of your way. I have a reputation with the people who don't want to perform or be part of the team. They don't come near me. If someone's a rock, I pick up on it right away, and I will walk around him or her to find someone better. The ones who can be motivated I take time to nurture. I consider them my projects. A lot of times these wannabes are people who want to help but don't know how. Listen, you can work with them. Lots of people in organizations have the mindset that all that matters are the regulations. God forbid if you ever work outside those regulations. They've got one foot on that regulation and they're holding it tight like a baby holds a blanket. What you're looking for is that first sign that their minds are opening. Usually you hear it in their vocabulary. What used to sound like "We can't do that ... the regulations won't allow it ... we have never done this before," well, suddenly that changes to "We have options ... let's take a look at the options ... let me research this and get back to you." The 80 percenters you want to nurture too, but
High yield silicon carbide from alkylated or arylated pre-ceramic polymer

International Nuclear Information System (INIS)

Baney, R.H.; Gaul, J.H.

1982-01-01

Alkylated or arylated methylpolysilanes which exhibit ease of handling and are used to obtain silicon carbide ceramic materials in high yields contain 0 to 60 mole percent (CH 3 ) 2 Si double bond units and 40 to 100 mole percent CH 3 Si triple bond units, wherein there is also bonded to the silicon atoms other silicon atoms and additional alkyl radicals of 1 to 4 carbon atoms or phenyl. They may be prepared by reaction of a Grignard reagent RMgX, where X is halogen and R is Csub(1-4)-alkyl or phenyl, with a starting material which is a solid at 25 0 C, and is identical to the product except that the remaining bonds on the silicon atoms are attached to another silicon atom, or a chlorine or a bromine atom. Ceramics result from heating the polysilane products to 1200 0 C, optionally with fillers. (author)
Secondary electron yields of carbon-coated and polished stainless steel

International Nuclear Information System (INIS)

Ruzic, D.; Moore, R.; Manos, D.; Cohen, S.

1982-01-01

To increase the power throughput to a plasma of an existing lower hybrid waveguide, secondary electron production on the walls and subsequent electron multiplication must be reduced. Since carbon has a low secondary electron coefficient (delta), measurements were performed for several UHV compatible carbon coatings (Aquadag/sup X/, vacuum pyrolyzed Glyptal/sup X/, and lamp black deposited by electrophoresis) as a function of primary beam voltage (35 eV to 10 keV), surface roughness (60 through 600 grit mechanical polishing and electropolishing), coating thickness, and angle of incidence (theta). Also measured were uncoated stainless steel, Mo, Cu, Ti, TiC, and ATJ graphite. The yields were obtained by varying the sample bias and measuring the collected current while the samples were in the electron beam of a scanning Auger microprobe. This technique allows delta measurements of Auger characterized surfaces with < or =0.3 mm spatial resolution. Results show delta to have a typical energy dependence, with a peak occurring at 200 to 300 eV for normal incidence, and at higher energy for larger theta. In general, delta increases with theta more for smooth surfaces than for rough ones. Ninety percent of the secondary electrons have energies less than 25 eV. Some carbonized coating and surface treatment combinations give delta/sub max/ = 0.88 +- 0.01 for normal electron beam incidence: a reduction of almost 40% compared to untreated stainless steel
Comparison of reduction agents in the synthesis of infinite-layer LaNiO2 films

International Nuclear Information System (INIS)

Ikeda, Ai; Manabe, Takaaki; Naito, Michio

2014-01-01

Highlights: • Reduction agents were compared from a viewpoint of the facility for topotactic reduction of LaNiO 3 to LaNiO 2 films. • TiH 2 and CaH 2 yielded infinite-layer LaNiO 2 with low and metallic resistivity. • H 2 released from metal hydrides plays a dominant role in the topotactic reduction. - Abstract: Reduction agents, such as activated carbon, TiH 2 , and CaH 2 , were compared from a viewpoint of the facility for the topotactic reduction of LaNiO 3 to LaNiO 2 films. Activated carbon did not yield infinite-layer LaNiO 2 whereas both of TiH 2 and CaH 2 yielded infinite-layer LaNiO 2 with low resistivity (∼1 mΩ cm at 300 K) as well as metallic behavior down to 70 K. Thermal desorption spectroscopy indicated that H 2 released from metal hydrides plays a dominant role in the topotactic reduction
Injecting drug use, sexual risk, HIV knowledge and harm reduction uptake in a large prison in Bali, Indonesia.

Science.gov (United States)

Sawitri, Anak Agung Sagung; Hartawan, Anak Agung Gede; Craine, Noel; Sari, Ayu Kartika; Septarini, Ni Wayan; Wirawan, Dewa Nyoman

2016-01-01

The purpose of this paper is to describe HIV-related risk behavior and knowledge of HIV among inmates of Kerobokan prison Bali, Indonesia. A cross-sectional survey of inmates of using a structured questionnaire and sample framework to reflect narcotic use among inmates and the prison gender mix. Among 230 inmates recruited to the study self-reported prevalence of injecting drug use was 7.4 percent (95 percent CI 4.0-10.8 percent). Respondents who participated in a prison based methadone treatment program were all still injecting drugs, these made up 13/17 of the IDU. In total, 47 percent (95 percent CIs 45-55 percent) of respondents who reported injecting also reported sharing needles within the last week. Sexual intercourse while in prison was reported by 3.0 percent (95 percent CI 0.82-5.26 percent) of study respondents. One-third of non-injectors were unaware of the preventative role of condom use. This study suggests that despite harm reduction initiatives within Kerobokan prison HIV risk behavior continues and there is a considerable lack of awareness of the importance of condom use in preventing HIV. The authors relied on self-reported risk behavior that may be subject to reporting bias. The sampling strategy may not reflect the true ratio inmates using or not using narcotics. The current harm reduction approach, including methadone substitution treatment should be optimized within the Indonesian prison setting. This is the first study reporting HIV-related risk behavior from an Indonesian prison with an established methadone substitution program.
New formula for calculation of cobalt-60 percent depth dose

International Nuclear Information System (INIS)

Tahmasebi Birgani, M. J.; Ghorbani, M.

2005-01-01

On the basis of percent depth dose calculation, the application of - dosimetry in radiotherapy has an important role to play in reducing the chance of tumor recurrence. The aim of this study is to introduce a new formula for calculating the central axis percent depth doses of Cobalt-60 beam. Materials and Methods: In the present study, based on the British Journal of Radiology table, nine new formulas are developed and evaluated for depths of 0.5 - 30 cm and fields of (4*4) - (45*45) cm 2 . To evaluate the agreement between the formulas and the table, the average of the absolute differences between the values was used and the formula with the least average was selected as the best fitted formula. The Microsoft Excel 2000 and the Data fit 8.0 soft wares were used to perform the calculations. Results: The results of this study indicated that one amongst the nine formulas gave a better agreement with the percent depth doses listed in the table of British Journal of Radiology . The new formula has two parts in terms of log (A/P). The first part as a linear function with the depth in the range of 0.5 to 5 cm and the other one as a second order polynomial with the depth in the range of 6 to 30 cm. The average of - the differences between the tabulated and the calculated data using the formula (Δ) is equal to 0.3 152. Discussion and Conclusion: Therefore, the calculated percent depth dose data based on this formula has a better agreement with the published data for Cobalt-60 source. This formula could be used to calculate the percent depth dose for the depths and the field sizes not listed in the British Journal of Radiology table
Knorr-Rabe partial reduction of pyrroles: Application to the synthesis of indolizidine alkaloids

Directory of Open Access Journals (Sweden)

Ryan John H

2008-01-01

Full Text Available Abstract Background The Birch reduction of electron rich pyrroles does not occur readily. However, dissolving metal reduction with zinc under acidic conditions gives 3-pyrrolines (2,5-dihydropyrroles in reasonable yield. This dissolving metal reduction was first reported by Knorr and Rabe in 1901 but since then has only been reported for the reduction of electron rich pyrroles. Results The partial reduction of bicyclic α-ketopyrrole derivatives has been performed under dissolving metal conditions with zinc and hydrochloric acid to give excellent yields of hexahydroindolizidines. This reduction method has been utilised for the diastereoselective synthesis of 5-alkylindolizidines and the stereoselectivity obtained is opposite to that of catalytic hydrogenation. Conclusion An efficient stereoselective synthesis of indolizidine alkaloids has been developed from α-ketopyrrole intermediates using a modified version of Knorr and Rabe's pyrrole reduction.
Estimates of nitrate loads and yields from groundwater to streams in the Chesapeake Bay watershed based on land use and geology

Science.gov (United States)

Terziotti, Silvia; Capel, Paul D.; Tesoriero, Anthony J.; Hopple, Jessica A.; Kronholm, Scott C.

2018-03-07

The water quality of the Chesapeake Bay may be adversely affected by dissolved nitrate carried in groundwater discharge to streams. To estimate the concentrations, loads, and yields of nitrate from groundwater to streams for the Chesapeake Bay watershed, a regression model was developed based on measured nitrate concentrations from 156 small streams with watersheds less than 500 square miles (mi2 ) at baseflow. The regression model has three predictive variables: geologic unit, percent developed land, and percent agricultural land. Comparisons of estimated and actual values within geologic units were closely matched. The coefficient of determination (R2 ) for the model was 0.6906. The model was used to calculate baseflow nitrate concentrations at over 83,000 National Hydrography Dataset Plus Version 2 catchments and aggregated to 1,966 total 12-digit hydrologic units in the Chesapeake Bay watershed. The modeled output geospatial data layers provided estimated annual loads and yields of nitrate from groundwater into streams. The spatial distribution of annual nitrate yields from groundwater estimated by this method was compared to the total watershed yields of all sources estimated from a Chesapeake Bay SPAtially Referenced Regressions On Watershed attributes (SPARROW) water-quality model. The comparison showed similar spatial patterns. The regression model for groundwater contribution had similar but lower yields, suggesting that groundwater is an important source of nitrogen for streams in the Chesapeake Bay watershed.
Fission-product yields for thermal-neutron fission of curium-243

International Nuclear Information System (INIS)

Breederland, D.G.

1982-01-01

Cumulative fission yields for 25 gamma rays emitted during the decay of 23 fission products produced by thermal-neutron fission of 243 Cm have been determined. Using Ge(Li) spectroscopy, 33 successive pulse-height spectra of gamma rays emitted from a 77-ng sample of 243 Cm over a period of approximately two and one-half months were analyzed. Reduction of these spectra resulted in the identification and matching of gamma-ray energies and half-lives to specific radionuclides. Using these results, 23 cumulative fission-product yields were calculated. Only those radionuclides having half-lives between 6 hours and 65 days were observed. Prior to this experiment, no fission-product yields had been recorded for 243 Cm
STUDY ON THE INFLUENCE OF SUCCESSIVE AND ALTERNATE CROPPING ON SOYBEAN YIELD AND QUALITY%重迎茬对大豆产量与品质影响的研究

Institute of Scientific and Technical Information of China (English)

刘忠堂; 于龙生

2000-01-01

本研究采取在五个生态区设置9圃固定轮作区与相应生态区生产地块调查相结合的方法，研究大豆迎茬，重茬一年、二年、三年对大豆生育，叶面积指数、干物质积累，构成产量因子及产量与品质的影响。三年研究结果表明，重、迎茬大豆均较正茬大豆减产，减产幅度随重、迎茬年限增加而加剧。以迎茬减产最少为6．1％，重茬一、二、三年分别减产9．9％，13．8％和19％。不同生态区减产程度不同。重迎茬对大豆生育，干物质积累及构成产量因子的影响与对产量的影响有相同趋势。重迎茬对大豆子实商品品质的影响较大，主要是百粒重降低，病粒率与虫食率增加，使大豆商品品质降低。对化学品质的影响在本研究周期中(指重茬三年)未见明显变化%The study was conducted at nine fixed rotation plots in five ecologic regions. Thepupose is to study the influence of soybean alternate, two, three and four years successivecropping on soybean growth, leaf area index, dry matter accumulation, yield charactersyield and pod quality. The results of three years showh that the soybean yield of successiveand alternate cropping decreased in comparson with that of normal on more cropping. Themore the years of successive and alternate cropping the more the soybean yield reduction.Yield reduction of alternate, tow, three and four years successive cropping are seperately6. 1, 9. 9, 13. 8 and 19 ％ less than normal rotation. The yield reduction of alternate crop-ping is the least among them. The level of yield reduction is various in different ecologic re-gions. The influnce trend of successive and alternate cropping to soybean growth, dry mat-ter accumulation, yield characters is the same as those to yield. Successive and alternatecropping have a significant effect on soybean commodity quality, such as, lower 100--seed weight, higher percent disease seeds and damaged seeds by
Weed Competition and its Effects on Pwani Hybrid 1 Maize Grain Yields in Coastal Kenya

International Nuclear Information System (INIS)

Kamau, G.M.; Saha, H.M.

1999-01-01

Weed competition is a serious constraint to maize production in coastal Kenya. A trial to asses the effects of weed competition on performance of maize was planted at Regional Research Centre-Mtwapa and Msabaha Research Sub-centre-Malindi in 1992. Pwani hybrid 1 maize was used in the trials. Weeding was done at weekly intervals from germination up to the sixth week in an additive weed removal system and plots maintained weed free afterwards. A weedy and a weed free plot were used as checks. Data on plant counts plant heights, weed biomass, weed identification and maize grain yield at 15 % MC were all recorded. There was a significant difference between weed and weedy free plots for grain yield, plant height and weed biomass for both sites. A 53% maize grain yield reduction due to weed competition was recorded. A 3% grain yield reduction equivalent to 1.03 bags for every week's delay in weeding after the first to weeks was realised for both sites. There was a corresponding grain yield loss as delay in weeding increased
Crop yield network and its response to changes in climate system

Science.gov (United States)

Yokozawa, M.

2013-12-01

Crop failure (reduction in crop yield) due to extreme weather and climate change could lead to unstable food supply, reflecting the recent globalization in world agricultural production. Specifically, in several major production countries producing large amount of main cereal crops, wheat, maize, soybean and rice, abrupt crop failures in wide area are significantly serious for world food supply system. We examined the simultaneous changes in crop yield in USA, China and Brazil, in terms of the changes in climate system such as El Nino, La nina and so on. In this study, we defined a crop yield networks, which represent the correlation between yearly changes in crop yields and climate resources during the crop growing season in two regions. The climate resources during the crop growing season represents here the average temperature and the accumulated precipitation during the crop growing season of a target crop. As climate data, we used a reanalysis climate data JRA-25 (Japan Meteorological Agency). The yearly changes in crop yields are based on a gridded crop productivity database with a resolution of 1.125 degree in latitude/longitude (Iizumi et al. 2013). It is constructed from the agriculture statistics issued by local administrative bureau in each country, which covers the period during 1982 to 2006 (25 years). For the regions being lack of data, the data was interpolated referring to NPP values estimated by satellite data. Crop yield network is constructed as follows: (1) let DY(i,y) be negative difference in crop yield of year y from the trend yield at grid i; (2) define the correlation of the differences Cij(y) = DY(i, y) DY(j, y); (3) if Cij(y) > Q, then grids i and j are mutually linked for a threshold value Q. Links between grids make a crop yield network. It is here noted that only negative differences are taken into account because we focused on the lean year cases (i.e. yields of both grids were lower than those in the long-term trend). The arrays of
Cleaning of a copper matte smelting slag from a water-jacket furnace by direct reduction of heavy metals.

Science.gov (United States)

Maweja, Kasonde; Mukongo, Tshikele; Mutombo, Ilunga

2009-05-30

Cleaning experiments of a copper matte smelting slag from the water-jacket furnace was undertaken by direct reduction in a laboratory-scale electric furnace. The effects of coal-to-slag ratio, w, and the reduction time, t, were considered for two different coal/slag mixing procedures. In the first procedure, metallurgical coal was added to the molten slag, whereas in the second procedure, coal was premixed with the solid slag before charging into the furnace. The recovery of heavy metals (Cu, Co), and the fuming of Pb and Zn were investigated. Contamination of the metal phase by iron and the acidity index of the final slag were analysed as these may impede the economical viability of the process. The lower w value of 2.56% yielded a recovery rate of less than 60% for copper and less than 50% for cobalt, and around 70% for zinc. However, increasing w to 5% allowed the recovery of 70-90% for Cu, Co and Zn simultaneously after 30-60 min reduction of the molten slag. After reduction, the cleaned slags contained only small amounts of copper and cobalt (zinc was efficient as the %Pb of the residual slag dropped to levels lower than 0.04% after 30 min of reduction. Ninety percent of the lead was removed from the initial slag and collected in the dusts. The zinc content of the cleaned slags quickly dropped to between 1 and 3 wt% from the initial 8.2% after 30 min reduction for w value of 5 and after 60 min reduction for w value of 2.56. The dusts contained about 60% Zn and 10% Pb. Recovery of lead from fuming of the slag was higher than 90% in all the experimental conditions considered in this study.
Guidance for growth factors, projections, and control strategies for the 15 percent rate-of-progress plans

International Nuclear Information System (INIS)

1993-03-01

Section 182(b)(1) of the Clean Air Act (Act) requires all ozone nonattainment areas classified as moderate and above to submit a State Implementation Plan (SIP) revision by November 15, 1993, which describes, in part, how the areas will achieve an actual volatile organic compound (VOC) emissions reduction of at least 15 percent during the first 6 years after enactment of the Clean Air Act Amendments of 1990 (CAAA). In addition, the SIP revision must describe how any growth in emissions from 1990 through 1996 will be fully offset. It is important to note that section 182(b)(1) also requires the SIP for moderate areas to provide for reductions in VOC and nitrogen oxides (NOx) emissions as necessary to attain the national primary ambient air quality standard for ozone by November 15, 1996. The guidance document focuses on the procedures for developing 1996 projected emissions inventories and control measures which moderate and above ozone nonattainment areas must include in their rate-of-progress plans. The document provides technical guidance to support the policy presented in the 'General Preamble: Implementation of Title I of the CAAA of 1990' (57 FR 13498)
Adapting SWAT hillslope erosion model to predict sediment concentrations and yields in large Basins.

Science.gov (United States)

Vigiak, Olga; Malagó, Anna; Bouraoui, Fayçal; Vanmaercke, Matthias; Poesen, Jean

2015-12-15

The Soil and Water Assessment Tool (SWAT) is used worldwide for water quality assessment and planning. This paper aimed to assess and adapt SWAT hillslope sediment yield model (Modified Universal Soil Loss Equation, MUSLE) for applications in large basins, i.e. when spatial data is coarse and model units are large; and to develop a robust sediment calibration method for large regions. The Upper Danube Basin (132,000km(2)) was used as case study representative of large European Basins. The MUSLE was modified to reduce sensitivity of sediment yields to the Hydrologic Response Unit (HRU) size, and to identify appropriate algorithms for estimating hillslope length (L) and slope-length factor (LS). HRUs gross erosion was broadly calibrated against plot data and soil erosion map estimates. Next, mean annual SWAT suspended sediment concentrations (SSC, mg/L) were calibrated and validated against SSC data at 55 gauging stations (622 station-years). SWAT annual specific sediment yields in subbasin reaches (RSSY, t/km(2)/year) were compared to yields measured at 33 gauging stations (87station-years). The best SWAT configuration combined a MUSLE equation modified by the introduction of a threshold area of 0.01km(2) where L and LS were estimated with flow accumulation algorithms. For this configuration, the SSC residual interquartile was less than +/-15mg/L both for the calibration (1995-2004) and the validation (2005-2009) periods. The mean SSC percent bias for 1995-2009 was 24%. RSSY residual interquartile was within +/-10t/km(2)/year, with a mean RSSY percent bias of 12%. Residuals showed no bias with respect to drainage area, slope, or spatial distribution. The use of multiple data types at multiple sites enabled robust simulation of sediment concentrations and yields of the region. The MUSLE modifications are recommended for use in large basins. Based on SWAT simulations, we present a sediment budget for the Upper Danube Basin. Copyright © 2015. Published by Elsevier B.V.
Effects of Super-Absorbent Polymer Application on Yield and Yield Components of Rapeseed (Brassica napus L.

Directory of Open Access Journals (Sweden)

Fariborz SHEKARI

2015-09-01

Full Text Available Limitation of water resources and its great impact on agricultural and natural resources play a crucial role in the efficiency of water use. Applying super absorbent polymer to the soil may be one of the methods to minimize the stress of weather dryness in arid and semi-arid regions. In order to evaluate the effects of hydrophilic polymer application on yield and water use efficiency of rapeseed plants, an experiment was conducted under field condition in 2012 at the Research Farm of the Faculty of Agriculture, University of Maragheh. Treatments’ factors were: (i 3 super absorbent polymers (SAP (Taravat A200 levels of 0 (without application, 75 and 150 kg ha-1 A200 application, (ii three irrigation levels of 80, 120 and 180 mm evaporation from class A basin in main plots, (iii two cultivars ʻHyola 401ʼ and ʻRVSʼ in sub plots as factorial split plot combination based on completely randomized block design with three replications. The results showed that in all of the measured traits within the experiment there were significant differences between SAP levels. Furthermore, increasing irrigation interval led to an increase in a thousand seeds’ weight, but decreased seed yield. Increasing water stress raised seed oil percent and infertile silique and subsequently resulted in reduced oil yield. ʻHyola 401ʼ was more susceptible to embryo abortion compared with ʻRVSʼ. As a conclusion of the research, SAP (A200 application in quantities smaller than 75 kg ha-1 may be recommended for rapeseed production under field condition.
Blackleg (Leptosphaeria maculans) Severity and Yield Loss in Canola in Alberta, Canada

Science.gov (United States)

Hwang, Sheau-Fang; Strelkov, Stephen E.; Peng, Gary; Ahmed, Hafiz; Zhou, Qixing; Turnbull, George

2016-01-01

Blackleg, caused by Leptosphaeria maculans, is an important disease of oilseed rape (Brassica napus L.) in Canada and throughout the world. Severe epidemics of blackleg can result in significant yield losses. Understanding disease-yield relationships is a prerequisite for measuring the agronomic efficacy and economic benefits of control methods. Field experiments were conducted in 2013, 2014, and 2015 to determine the relationship between blackleg disease severity and yield in a susceptible cultivar and in moderately resistant to resistant canola hybrids. Disease severity was lower, and seed yield was 120%–128% greater, in the moderately resistant to resistant hybrids compared with the susceptible cultivar. Regression analysis showed that pod number and seed yield declined linearly as blackleg severity increased. Seed yield per plant decreased by 1.8 g for each unit increase in disease severity, corresponding to a decline in yield of 17.2% for each unit increase in disease severity. Pyraclostrobin fungicide reduced disease severity in all site-years and increased yield. These results show that the reduction of blackleg in canola crops substantially improves yields. PMID:27447676
Blackleg (Leptosphaeria maculans Severity and Yield Loss in Canola in Alberta, Canada

Directory of Open Access Journals (Sweden)

Sheau-Fang Hwang

2016-07-01

Full Text Available Blackleg, caused by Leptosphaeria maculans, is an important disease of oilseed rape (Brassica napus L. in Canada and throughout the world. Severe epidemics of blackleg can result in significant yield losses. Understanding disease-yield relationships is a prerequisite for measuring the agronomic efficacy and economic benefits of control methods. Field experiments were conducted in 2013, 2014, and 2015 to determine the relationship between blackleg disease severity and yield in a susceptible cultivar and in moderately resistant to resistant canola hybrids. Disease severity was lower, and seed yield was 120%–128% greater, in the moderately resistant to resistant hybrids compared with the susceptible cultivar. Regression analysis showed that pod number and seed yield declined linearly as blackleg severity increased. Seed yield per plant decreased by 1.8 g for each unit increase in disease severity, corresponding to a decline in yield of 17.2% for each unit increase in disease severity. Pyraclostrobin fungicide reduced disease severity in all site-years and increased yield. These results show that the reduction of blackleg in canola crops substantially improves yields.

Drag Reduction Obtained by the Addition of a Boattail to a Box Shaped Vehicle. M.S. Thesis

Science.gov (United States)

Peterson, R. L.

1981-01-01

Coast down tests were performed on a box shaped ground vehicle used to simulate the aerodynamic drag of high volume transports such as delivery vans, motor homes and trucks. The results of these tests define the reduction in aerodynamic drag that can be obtained by the addition of either a boattail or a truncated boattail to an otherwise blunt based vehicle. Test velocities ranged up to 96.6 km/h (60 mph) with Reynolds numbers to 1.3 x 10 the 7th power. The full boattail provided an average 32 percent reduction in drag at highway speeds whereas the truncated boattail provided an average 31 percent reduction in drag as compared to the configuration having the blunt base. These results are compared with one tenth scale wind tunnel model data.
Relationship between breast sound speed and mammographic percent density

Science.gov (United States)

Sak, Mark; Duric, Nebojsa; Boyd, Norman; Littrup, Peter; Myc, Lukasz; Faiz, Muhammad; Li, Cuiping; Bey-Knight, Lisa

2011-03-01

Despite some shortcomings, mammography is currently the standard of care for breast cancer screening and diagnosis. However, breast ultrasound tomography is a rapidly developing imaging modality that has the potential to overcome the drawbacks of mammography. It is known that women with high breast densities have a greater risk of developing breast cancer. Measuring breast density is accomplished through the use of mammographic percent density, defined as the ratio of fibroglandular to total breast area. Using an ultrasound tomography (UST) prototype, we created sound speed images of the patient's breast, motivated by the fact that sound speed in a tissue is proportional to the density of the tissue. The purpose of this work is to compare the acoustic performance of the UST system with the measurement of mammographic percent density. A cohort of 251 patients was studied using both imaging modalities and the results suggest that the volume averaged breast sound speed is significantly related to mammographic percent density. The Spearman correlation coefficient was found to be 0.73 for the 175 film mammograms and 0.69 for the 76 digital mammograms obtained. Since sound speed measurements do not require ionizing radiation or physical compression, they have the potential to form the basis of a safe, more accurate surrogate marker of breast density.
Effect of Drought Stress at Different Growth Stages on Yield and Yield Components of Six Rice (Oryza sativa L. Genotypes

Directory of Open Access Journals (Sweden)

Sharifunnessa Moonmoon

2017-12-01

Full Text Available Drought stress affects plant growth and development and ultimately, reduced grain yield of rice. But stress at different growth stages may respond differently which is still unclear. Therefore, a pot experiment was carried out with six rice genotypes to determine the critical growth stage where drought stress effect on yield reduction and to find stress tolerance mechanism in rice genotypes. Drought stress (control i.e. no stress and 40% field capacity, FC was imposed on Binadhan-13, Kalizira, BRRI dhan34, Ukunimodhu, RM-100-16 and NERICA mutant rice genotypes at maximum tillering, panicle initiation and grain filling stages and discontinued when the specific stage was over. The experiment was laid out in a complete randomized design with three replications. Drought stress affected number of effective tiller hill-1, number of spikelets panicle-1, filled grains hill-1, 1000-grain weight and grain yield. Binadhan-13 produced the highest grain yield and the lowest sterility under drought stress at grain filling stage. Percentage of spikelet sterility increased under drought stress (40% FC especially at the panicle initiation stage resulting low grain yield. Among the tested genotypes Binadhan-13 performed well by reducing spikelet sterility under drought stress condition. For 1000-grain weight and grain yield, grain filling stage was found more crucial. From the current research, drought tolerance mechanism was found in genotypes Binadhan-13 and NERICA mutant. [Fundam Appl Agric 2017; 2(3.000: 285-289
The Effect of Potassium on Growth and Yield of Strawberry (Fragaria Ananassa (Duchesne ex Weston) Duchesne ex Rozier)

International Nuclear Information System (INIS)

Bibi, S; Rhaman, I.; Ijaz, F.; Afzal, A.; Khan, M.; Khan, R.

2016-01-01

Fragaria ananassa (Duchesne ex Weston) Duchesne ex-Rozier (Strawberry) variety chandler of Agriculture Research Station (ARS) Baffa, Mansehra was evaluated for different growth and yield parameters under five treatments. In this experiment Potassium was used in 5 different treatments of 3 replications (T0 = Control, T1 = 200 g/6.75m/sup 2/, T2 = 400 g/6.75m/sup 2/, T3 = 600 g/6.75m/sup 2/, T4 = 800 g/6.75m/sup 2/). The results showed maximum value under T3 (405g/6.75m/sup 2/) for characteristics like survival percentage (83.54 percent), plant height (32.05 cm), canopy size (13.62 cm), crown diameter (2.73 cm), number of branches (35.83), number of leaves (67.00), leaf length (5.87 cm), root length (3.51 cm), total number of fruits (43.93), days to 50 percent fruiting (233.67), fruit diameter (3.96 cm), fruit weight (411.40g). Moreover, transplanting date (20 Sep, 2013) is suitable to get maximum yield of strawberry variety Chandler. The findings of this experiment showed that great variations in morphological, physical and agronomic traits of strawberry variety and can be utilized to develop high yield and better quality of strawberry. (author)
Experience with high percent step load decrease from full power in NPP Krsko

International Nuclear Information System (INIS)

Vukovic, V.

2000-01-01

The control system of NPP Kriko, is designed to automatically control the reactor in the power range between 15 and 100 percent of rated power for the following designed transients; - 10 percent step change in load; 5 percent per minute loading and unloading; step full load decrease with the aid of automatically initiated and controlled steam dump. Because station operation below 15 percent of rated power is designed for a period of time during startup or standby conditions, automatic control below 15 percent is not provided. The steam dump accomplishes the following functional tasks: it permits the nuclear plants to accept a sudden 95 percent loss of load without incurring reactor trip; it removes stored energy and residual heat following a reactor trip and brings the plant to equilibrium no-load conditions without actuation of the steam generator safety valves; it permits control of the steam generator pressure at no-load conditions and permits a manually controlled cooldown of the plant. The first two functional tasks are controlled by Tavg. The third is controlled by steam pressure. Interlocks minimise any possibility of an inadvertent actuation of steam dump system. This paper discusses relationships between designed (described) characteristics of plant and the data which are obtained during startup and/or first ten years of operation. (author)
Effects of Plant Density on Sweet and Baby Corn (Hybrid KSC 403 Yield and Yield Components

Directory of Open Access Journals (Sweden)

H Bavi

2016-07-01

GlM procedure. Means of all treatments were comprised using least significant difference (LSD at 5 % probability level. Results and Discussion The effects of plant density on yield components of baby corn was significant. Increasing the plant densities increased the ear number and percentage of non-standard ears. The Highest yield of ear without husk, standard and non-standard were obtained (2649.5, 766.97, and 3043.9 kg.ha-1, respectively with 13 plants.m-2. In sweet corn, increasing plant density from 7 to 13 plants.m-2, decreased row per ear, grain per row and thousand grain weight. Highest grain yield (1232.5 kg ha-1 and green ear (12607.2 kg ha-1 of sweet corn were obtained with plant density of 9.m-2. Conclusions Analysis of correlation showed that in both baby and sweet corn, there were positive and significant correlations between yield and its components. There was the high number of non-standard ears in all experimental treatments. In sweet corn, the standard ear without husk yield has positive and significant correlation with all traits except the percentage of standard ear and sheathed ear weight. In addition, unsuitable climate conditions during silking stage reduced the yield of sweet corn through the high number of aborted florets. Yield of sweet corn yield showed negative and significant correlation with grain row per ear and grain per row. However, increasing the ear number.m-2 increased yield in higher plant densities up to 9 plant.m-2 density. Generally, the baby corn had high yield with good quality in this region, but, standard ear percent of the baby corn of the hybrid KSC 403 was very low. On the other hand, sweet corn grain yield was low due to high air temperatures during pollination and maturity stages.
Grain Yield, Its Components, Genetic Diversity and Heritability in Chickpea (Cicer arietinum L.

Directory of Open Access Journals (Sweden)

M. Kakaei

2015-09-01

Full Text Available The current research was carried out to investigate grain yield and components and their genetic diversity and heritability of some important agronomic traits, in 19 chickpea genotypes, based on a randomized complete block design with 3 replications in Research Field of Bu-Ali Sina University, Hamadan, Iran in 2011-2012 growing seasons. The ANOVA results showed that, there were highly significant differences (p < 0.01 among genotypes for the SPAD number, number of sub-branch per plant, pod number per plant, 100-kernel weight, grain yield, biological yield, and harvest index. The mean comparisons results indicated that the genotypes 14, 12, 4 and 19 (with 234.7, 240, 250.3 and 259.4 kilogram of grain yield per ha, respectively and the genotypes 18, 8, 15, and 6 (with 151.01, 167.6, 167.8 and 189 kilogram of grain yield per ha, respectively had the maximum and minimum economic yield, respectively. According to phonotypical correlation results, there were positive and significant (p < 0.01 correlations between grain yield and pod number per plant (0.623**, plant height (0.432**, harvest index (0.425** and biomass (0.349**. Step-wise regression indicated that the pod number per plant, harvest index, biomass, number of sub-branch per plant, and plant height were the most effective traits on economic yield and they explained 84.68 percent of the variation in economic yield. Furthermore, harvest index and seed number per plant had the maximum and minimum heritability, respectively, indicating that they could be hired as sources of variation for improving the grain yield and selecting superior genotypes.
49 CFR 178.50 - Specification 4B welded or brazed steel cylinders.

Science.gov (United States)

2010-10-01

... of the testing machine may not exceed 1/8 inch per minute during yield strength determination. (l... conducted to determine yield strength, tensile strength, elongation, and reduction of area of material as... strength not over 73 percent of tensile strength. In this instance, a flattening test is not required. (2...
49 CFR 178.38 - Specification 3B seamless steel cylinders.

Science.gov (United States)

2010-10-01

... speed of the testing machine may not exceed 1/8 inch per minute during yield strength determination. (l... physical test must be conducted to determine yield strength, tensile strength, elongation, and reduction of... strength not over 73 percent of tensile strength. In this instance, the flattening test is not required. (2...
School Designed To Use 80 Percent Less Energy

Science.gov (United States)

American School and University, 1975

1975-01-01

The new Terraset Elementary School in Reston, Virginia, uses earth as a cover for the roof area and for about 80 percent of the wall area. A heat recovery system will be used with solar collectors playing a primary role in heating and cooling. (Author/MLF)
Yield and drougth tolerance of six varieties of common bean (Phaseolus vulgaris L. under field condition

Directory of Open Access Journals (Sweden)

Yanitza Meriño Hernandez

2015-01-01

Full Text Available In two moisture conditions (drought and irrigation were evaluated six varieties of common bean (Phaseolus vulgaris L., with a factorial randomized complete blocks. The objectives of the study was to evaluate the effect caused by drought conditions crop varieties, identify high performance and features that enable them to adapt to varying conditions of soil moisture. With the data in yields between the two humidity conditions intensity indices of drought (IIS, susceptibility to drought (ISS, relative efficiency (IER, geometric mean (GM and percent yield losses were calculated . The results were statistically processed using the Statistica software version 8.0 for Windows, if significant differences Tukey test was applied to p<0.05. The selection based on levels ISS, MG, IER and PPR identified high yielding varieties adapted to drought and favorable moisture conditions.
Evaluation of Irrigation Regimes and Use of Organic Fertilizers on Qualitive and Quantitive Yield of Borage (Borago officinalis L.

Directory of Open Access Journals (Sweden)

Rana Gholinezhad

2016-10-01

Full Text Available To study the effects of irrigation regimes and organic fertilizers (compost and vermicompost on mucilage percentage and some quality characteristics of borago (Borago officinalis a field experiment was conducted in a split plot arrangement based on randomized complete block design with three replications at the Research Farm, Faculty of Agriculture, University of Zabol, Iran during 2012. Irrigation regimes were S1: 100% FC, as control, S2: 80% FC (moderate stress and S3: 60% FC (severe stress and application of organic fertilizers: N1: without fertilizer as control, N2: 40 t.ha-1 compost, N3: 4 t.ha-1 vermicompost were assigned to main plots and sub plots, respectively. The results showed that N, P and K, as well as the amount of chlorophyll a, carotenoid and total chlorophyll content decreased with increasing drought stress, but decreasing effects of fertilizers levels on traits were not high. Stress conditions and application of compost increased sodium percentage. By increasing drought stress, soluble carbohydrates and mucilage percent also increased. Highest mucilage percent (2.37 was obtained from moderate stress treatment. Highest total dry yield (13.48 t.ha-1 was also due to non-stress conditions. This was not significantly different mild stress. Application of organic fertilizers, particularly compost, resulted in greater performance. It can be concluded that acceptable yield of dry borage and higher mucilage percent can be obtained from irrigation at 80 percent field capacity and use of compost in Zabol climatic condition.
Effect of Two Advanced Noise Reduction Technologies on the Aerodynamic Performance of an Ultra High Bypass Ratio Fan

Science.gov (United States)

Hughes, Christoper E.; Gazzaniga, John A.

2013-01-01

A wind tunnel experiment was conducted in the NASA Glenn Research Center anechoic 9- by 15-Foot Low-Speed Wind Tunnel to investigate two new advanced noise reduction technologies in support of the NASA Fundamental Aeronautics Program Subsonic Fixed Wing Project. The goal of the experiment was to demonstrate the noise reduction potential and effect on fan model performance of the two noise reduction technologies in a scale model Ultra-High Bypass turbofan at simulated takeoff and approach aircraft flight speeds. The two novel noise reduction technologies are called Over-the-Rotor acoustic treatment and Soft Vanes. Both technologies were aimed at modifying the local noise source mechanisms of the fan tip vortex/fan case interaction and the rotor wake-stator interaction. For the Over-the-Rotor acoustic treatment, two noise reduction configurations were investigated. The results showed that the two noise reduction technologies, Over-the-Rotor and Soft Vanes, were able to reduce the noise level of the fan model, but the Over-the-Rotor configurations had a significant negative impact on the fan aerodynamic performance; the loss in fan aerodynamic efficiency was between 2.75 to 8.75 percent, depending on configuration, compared to the conventional solid baseline fan case rubstrip also tested. Performance results with the Soft Vanes showed that there was no measurable change in the corrected fan thrust and a 1.8 percent loss in corrected stator vane thrust, which resulted in a total net thrust loss of approximately 0.5 percent compared with the baseline reference stator vane set.
National Land Cover Database (NLCD) Percent Developed Imperviousness Collection

Data.gov (United States)

U.S. Geological Survey, Department of the Interior — The National Land Cover Database (NLCD) Percent Developed Imperviousness Collection is produced through a cooperative project conducted by the Multi-Resolution Land...
In the field of energy cost reduction, what is the potential?; En matiere de reduction des depenses d`energie: quel est le gisement?

Energy Technology Data Exchange (ETDEWEB)

Millet, B. [Departement Industrie, CEREN (France)

1996-12-31

Through a segmentation of the fuel and electric power consumptions in the various industrial sectors and energy consumption process types in France in 1990, the energy conservation potential in the French metalworking and mechanical industry is analyzed and its evolution up to 2005 is assessed. It is shown that the reduction potential amounts to 450 kTep or 20 percent of the metalworking and metallic construction industry energy consumption, with an important part for the out-of-process sector (space heating, compressed air production, lighting). In the process sector, important reductions could be realized in thermal treatments and metal heating prior forming
Effects of Foliar Applications of Sulfur, Nitrogen and Phosphorus on Castor Bean (Ricinus cmmunis L. Seed Yield and its Components under Water Deficit Conditions

Directory of Open Access Journals (Sweden)

M. Mosavi

2015-08-01

Full Text Available To determine the effects of foliar applications of some macroelements on castor seed yield and its components under drought stress conditions, an experiment was conducted at the Agricultural Research Center of East Azerbaijan province. A factorial experiment, based on randomized complete block design with three replications, was carried out during 2013 growing season. Treatment factors consisted of irrigations with two levels (no water deficit and water deficit during grain filling stage and of foliar applications of macroelements with four levels [control, wettable sulfur (0.2 percent, nitrogen (urea: 0.6 percent and phosphor (super phosphate triple: 0.4 percent. Traits studied were: plant height, number of inflorescence, number of lateral branches, number of leaves, leaf temperature, relative water content, number of seeds per plant, 1000-kernal weight and seed yield. All traits, except number of inflorescence, were affected significantly by drought stress. Water deficit reduced plant height, number of leaves, number of seeds per plant, 1000-kernal weight, seed yield, relative water content, while it increased leaf temperature. Number of lateral branches was affected significantly by interaction between factors. Maximum latral branches (1.86 were obtained under non-stress treatment with nitrogen foliar application. Moderate drought stress had significant effect on leaf temperature and relative water content. It seems that, these traits can be used in determination of water deficit effects on castor bean.
Atmospheric stabilization of CO2 emissions: Near-term reductions and absolute versus intensity-based targets

International Nuclear Information System (INIS)

Timilsina, Govinda R.

2008-01-01

This study analyzes CO 2 emissions reduction targets for various countries and geopolitical regions by the year 2030 to stabilize atmospheric concentrations of CO 2 at 450 ppm (550 ppm including non-CO 2 greenhouse gases) level. It also determines CO 2 intensity cuts that would be required in those countries and regions if the emission reductions were to be achieved through intensity-based targets without curtailing their expected economic growth. Considering that the stabilization of CO 2 concentrations at 450 ppm requires the global trend of CO 2 emissions to be reversed before 2030, this study develops two scenarios: reversing the global CO 2 trend in (i) 2020 and (ii) 2025. The study shows that global CO 2 emissions would be limited at 42 percent above 1990 level in 2030 if the increasing trend of global CO 2 emissions were to be reversed by 2020. If reversing the trend is delayed by 5 years, global CO 2 emissions in 2030 would be 52 percent higher than the 1990 level. The study also finds that to achieve these targets while maintaining expected economic growth, the global average CO 2 intensity would require a 68 percent drop from the 1990 level or a 60 percent drop from the 2004 level by 2030
[Tobacco reduction in a prison of France].

Science.gov (United States)

Harcouët, L; Balanger, S; Meunier, N; Mourgues, A; Grabar, S; Haouili, B; Guillevin, L

2008-05-01

Little is known about free nicotine transdermal patch efficacy on tobacco reduction in prisoners. The objective is to study this efficacy in prison as well as motivations to reduce and influence of socioeconomic conditions and other addictions in prisoners' aspiration to stop smoking. A prospective study was proposed to prisoners candidate to tobacco cessation. Assessment was made by questionnaires and visits to physicians working at the prison. Nicotinic patches were systematically proposed to patients with a starting 15 mg/16 h dose (or 10 mg/16 h if the dependence was low), followed by a 10 and 5 mg/16 h dose reduction. Prisoners motivated to smoking cessation (N=73) generally had multiaddictive behaviours and precarious socioeconomic profile. Thirty percent of prisoners self-reported a reduction of 50% of their cigarettes consumption until they left prison. Median duration of this successful treatment was 45 days. Median duration of treatment response for patients who relapsed in prison (15 %) was 75 days. No predictive factor of success was found. Tobacco reduction is possible in prison even if living conditions are not favourable.
Future wheat yields in Western Australia under a warmer and drier climate

International Nuclear Information System (INIS)

Farre, Imma; Foster, Ian; Charles, Steve

2007-01-01

Full text: Full text: Climate change projections for the mid 21st century for southern Western Australia indicate an increase in temperatures, a decrease in rainfall and higher C02 concentrations. These changes could have adverse impacts on some agricultural systems, but they may also offer new opportunities (i.e. in areas where the risk of waterlogging may be reduced). In this paper we studied the potential impacts of climate change on wheat production by combining three modelling systems. Daily climate data for current and future conditions from the CCAM climate model was statistically downscaled to individual locations in the Western Australia wheatbelt. This climate data was then input to the APSIM-Wheat simulation model to evaluate yields and phenology under current and future climate for several soil types. The aim was to investigate the usefulness of such a modelling cascade in defining key risks to wheat cropping from projected climate change. In an earlier stage of the project, we compared climate simulation from several climate models (CSIRO Mk3, CCAM, ECHAM and HADCM), and selected the CCAM model as best representing the climate of southern Western Australia. This was used for a more detailed study of the impacts on wheat cropping. The APSIM model simulates crop development, yield, water uptake and nitrogen accumulation in response to temperature, radiation, C02 level, water and nitrogen supply. It offers a framework for investigating interactions and testing some simple adaptation options. The CCAM model simulated total annual rainfall reductions of 5-11% for 2050 across the locations studied (consistent with other model projections). Total annual rainfall reductions tended to be higher in the high-rainfall locations than in the low- or medium-rainfall locations. The highest seasonal rainfall reduction was predicted for April-June, resulting in later sowing opportunities and decreasing expected yields. The impacts of climate change varied depending on
The unbearable lightness of "light" cigarettes: a comparison of smoke yields in six varieties of Canadian "light" cigarettes.

Science.gov (United States)

Gendreau, Paul L; Vitaro, Frank

2005-01-01

Labelling cigarettes as "light" or "mild" is claimed to be one of the biggest marketing scams in Canadian history. Arguably, such labelling implies that these varieties of cigarettes are less harmful than "regular" cigarettes. In Canada, a food product can be labelled "light" if there is a 25% reduction from the "reference food" and if the constituent being reduced is clearly identified (e.g., light in fat). Cigarette labelling does not comply with these regulations, however. To examine whether or not some tobacco constituents meet the 25% reduction criterion, we compared yields of 41 toxic and/or carcinogenic smoke constituents in six varieties of "light" cigarettes to the yields of "regular" cigarettes. We selected cigarettes from the two most popular Canadian brands, Du Maurier and Players. Using a set of data provided by Imperial Tobacco Canada and made available to the public by the Government of British Columbia, we compared yields measured under a laboratory protocol (modified ISO) that was designed to provide a more rigorous evaluation of the differences between varieties of cigarettes and a more accurate assessment of smokers' potential smoke intake than the traditional protocol (standard ISO). For all six varieties of "light" cigarettes, the yields of nicotine were higher by an average of 5% (range: 1% to 13%). The 25% reduction criterion was not met for any variety of "light" cigarettes concerning yields of tar. For all cigarettes tested, yields of tar were reduced on average by only 16% (range: 5% to 22%). For carbon monoxide (CO), only Player's Smooth Light had an over 25% reduction (30%) compared with Player's Regular. Conversely, yield of CO was 24% higher for Du Maurier Lights compared with Du Maurier Regular. As for the other smoke constituents, the majority (75%) were not reduced by 25% or more in "light" cigarettes, and a sizeable proportion of yields (e.g., acrylonitrile, benzene, chromium, m+p cresol, mercury, nickel, toluene) were larger in

Yield efficiency for nine apple cultivars grafted on two rootstocks

Directory of Open Access Journals (Sweden)

João Caetano Fioravanço

Full Text Available ABSTRACT: Currently, using smaller trees is one of the most important trends in apple cultivation. It is expected that reduced size plants produce lower amount of fruit, but with high yield and yield efficiency. The aim of this study was to evaluate the yield efficiency (YE of nine apple tree cultivars, grafted on two rootstocks, from the second to the seventh year after planting. The YE indexes oscillated from one to the other year, regardless of rootstock. Correlations between YE and yield per tree and between YE and trunk cross sectional area (TCSA confirmed that efficiency can be increased by the production increment or by the plant's vigor reduction. The usefulness of cumulative YE (ƩYE is highlighted to compare apple tree cultivars after the third year of production. The highest ƩYE indexes were observed for 'Royal Gala' and 'Baigent', on M-9 rootstock, and for 'Gala Real' and 'Maxi-Gala', on Marubakaido/M-9 rootstock.
Quantitative Effects of Early and Late Blights on Tomato Yields in Cameroon

Directory of Open Access Journals (Sweden)

Fontem, DA.

2003-01-01

Full Text Available Early blight caused by Alternaria solani and late blight caused by Phytophthora infestans are the major diseases of tomato (Lycopersicon esculentum in Cameroon. The effect of both diseases on fruit yield was evaluated during the 1995 growing season in Dschang, Cameroon.Ten varieties were planted in the first trial (March-July and nine in the second (July- November. In both trials, plots were sprayed weekly with Ridomil Plus (2.0 kg/ha before flowering and with maneb (1.6 kg/ha after flowering. Early blight was more severe in the early part of the first trial, while late blight caused most damage during the second. Marketable yields varied according to variety. High yields in sprayed plots were obtained in Dona F1 (61.63 t/ha and Heinz 1370 (68.24 t/ha during the first trial, and in Fline (58.35 t/ha, Mecline (64.25 t/ha, and Moboline (55.16 t/ha during the second trial. Percent fruit infection in sprayed plots caused by both diseases varied according to variety from 12 to 65% in the first season and from 14 to 52% in the second, while losses in marketable yields for both blights were as high as 100% in unsprayed plots.
The metabolic costs of improving ethanol yield by reducing glycerol formation capacity under anaerobic conditions in Saccharomyces cerevisiae.

Science.gov (United States)

Pagliardini, Julien; Hubmann, Georg; Alfenore, Sandrine; Nevoigt, Elke; Bideaux, Carine; Guillouet, Stephane E

2013-03-28

Finely regulating the carbon flux through the glycerol pathway by regulating the expression of the rate controlling enzyme, glycerol-3-phosphate dehydrogenase (GPDH), has been a promising approach to redirect carbon from glycerol to ethanol and thereby increasing the ethanol yield in ethanol production. Here, strains engineered in the promoter of GPD1 and deleted in GPD2 were used to investigate the possibility of reducing glycerol production of Saccharomyces cerevisiae without jeopardising its ability to cope with process stress during ethanol production. For this purpose, the mutant strains TEFmut7 and TEFmut2 with different GPD1 residual expression were studied in Very High Ethanol Performance (VHEP) fed-batch process under anaerobic conditions. Both strains showed a drastic reduction of the glycerol yield by 44 and 61% while the ethanol yield improved by 2 and 7% respectively. TEFmut2 strain showing the highest ethanol yield was accompanied by a 28% reduction of the biomass yield. The modulation of the glycerol formation led to profound redox and energetic changes resulting in a reduction of the ATP yield (YATP) and a modulation of the production of organic acids (acetate, pyruvate and succinate). Those metabolic rearrangements resulted in a loss of ethanol and stress tolerance of the mutants, contrarily to what was previously observed under aerobiosis. This work demonstrates the potential of fine-tuned pathway engineering, particularly when a compromise has to be found between high product yield on one hand and acceptable growth, productivity and stress resistance on the other hand. Previous study showed that, contrarily to anaerobiosis, the resulting gain in ethanol yield was accompanied with no loss of ethanol tolerance under aerobiosis. Moreover those mutants were still able to produce up to 90 gl-1 ethanol in an anaerobic SSF process. Fine tuning metabolic strategy may then open encouraging possibilities for further developing robust strains with improved
Calculations of secondary electron yield of graphene coated copper for vacuum electronic applications

Directory of Open Access Journals (Sweden)

H. K. A. Nguyen

2018-01-01

Full Text Available The suppression of secondary electron yield (SEY which can possibly lead to multipactor is an important goal for several applications. Though some techniques have focused on geometric modifications to lower the SEY, the use of graphene coatings as thin as a few monolayers is a promising new development that deserves attention either as a standalone technique or in concert with geometric alterations. Here we report on Monte Carlo based numerical studies of SEY on graphene coated copper with comparisons to recent experimental data. Our predicted values are generally in good agreement with reported measurements. Suppression of the secondary electron yield by as much as 50 percent (over copper with graphene coating is predicted at energies below 125 eV, and bodes well for multipactor suppression in radio frequency applications.
An investigation of drag reduction for tractor trailer vehicles with air deflector and boattail. [wind tunnel tests

Science.gov (United States)

Muirhead, V. U.

1981-01-01

A wind tunnel investigation was conducted to determine the influence of several physical variables on the aerodynamic drag of a trailer model. The physical variables included: a cab mounted wind deflector, boattail on trailer, flow vanes on trailer front, forced transition on trailer, and decreased gap between tractor and trailer. Tests were conducted at yaw angles (relative wind angles) of 0, 5, 10, 20, and 30 degrees and Reynolds numbers of 3.58 x 10 to the 5th power 6.12 x 10 to the 5th power based upon the equivalent diameter of the vehicles. The wind deflector on top of the cab produced a calculated reduction in fuel consumption of about 5 percent of the aerodynamic portion of the fuel budget for a wind speed of 15.3 km/hr (9.5 mph) over a wind angle range of 0 deg to 180 deg and for a vehicle speed of 88.5 km/hr (55 mph). The boattail produced a calculated 7 percent to 8 percent reduction in fuel consumption under the same conditions. The decrease in gap reduced the calculated fuel consumption by about 5 percent of the aerodynamic portion of the fuel budget.
Brazilian Soybean Yields and Yield Gaps Vary with Farm Size

Science.gov (United States)

Jeffries, G. R.; Cohn, A.; Griffin, T. S.; Bragança, A.

2017-12-01

Understanding the farm size-specific characteristics of crop yields and yield gaps may help to improve yields by enabling better targeting of technical assistance and agricultural development programs. Linking remote sensing-based yield estimates with property boundaries provides a novel view of the relationship between farm size and yield structure (yield magnitude, gaps, and stability over time). A growing literature documents variations in yield gaps, but largely ignores the role of farm size as a factor shaping yield structure. Research on the inverse farm size-productivity relationship (IR) theory - that small farms are more productive than large ones all else equal - has documented that yield magnitude may vary by farm size, but has not considered other yield structure characteristics. We examined farm size - yield structure relationships for soybeans in Brazil for years 2001-2015. Using out-of-sample soybean yield predictions from a statistical model, we documented 1) gaps between the 95th percentile of attained yields and mean yields within counties and individual fields, and 2) yield stability defined as the standard deviation of time-detrended yields at given locations. We found a direct relationship between soy yields and farm size at the national level, while the strength and the sign of the relationship varied by region. Soybean yield gaps were found to be inversely related to farm size metrics, even when yields were only compared to farms of similar size. The relationship between farm size and yield stability was nonlinear, with mid-sized farms having the most stable yields. The work suggests that farm size is an important factor in understanding yield structure and that opportunities for improving soy yields in Brazil are greatest among smaller farms.
Comparison of reduction agents in the synthesis of infinite-layer LaNiO{sub 2} films

Energy Technology Data Exchange (ETDEWEB)

Ikeda, Ai [Department of Applied Physics, Tokyo University of Agriculture and Technology, Naka-cho 2-24-16, Koganei, Tokyo 184-8588 (Japan); Research Fellow of the Japan Society for the Promotion of Science, Ichiban-cho 8, Chiyoda, Tokyo 102-8472 (Japan); Manabe, Takaaki [National Institute of Advanced Industrial Science and Technology (AIST), Higashi 1-1-1, Tsukuba, Ibaraki 305-8565 (Japan); Naito, Michio, E-mail: minaito@cc.tuat.ac.jp [Department of Applied Physics, Tokyo University of Agriculture and Technology, Naka-cho 2-24-16, Koganei, Tokyo 184-8588 (Japan)

2014-11-15

Highlights: • Reduction agents were compared from a viewpoint of the facility for topotactic reduction of LaNiO{sub 3} to LaNiO{sub 2} films. • TiH{sub 2} and CaH{sub 2} yielded infinite-layer LaNiO{sub 2} with low and metallic resistivity. • H{sub 2} released from metal hydrides plays a dominant role in the topotactic reduction. - Abstract: Reduction agents, such as activated carbon, TiH{sub 2}, and CaH{sub 2}, were compared from a viewpoint of the facility for the topotactic reduction of LaNiO{sub 3} to LaNiO{sub 2} films. Activated carbon did not yield infinite-layer LaNiO{sub 2} whereas both of TiH{sub 2} and CaH{sub 2} yielded infinite-layer LaNiO{sub 2} with low resistivity (∼1 mΩ cm at 300 K) as well as metallic behavior down to 70 K. Thermal desorption spectroscopy indicated that H{sub 2} released from metal hydrides plays a dominant role in the topotactic reduction.
Development of high yielding mutants in lentil

International Nuclear Information System (INIS)

Rajput, M.A.; Sarwar, G.; Siddiqui, K.A.

2001-01-01

Full text: Lentil (Lens culinaris Medik.) locally known as Masoor, is the second most important rabi pulse crop, after chickpea, in Pakistan. It is cultivated on an area of over 63,400 ha, which constitutes about 4.83% of the total area under pulses. The annual production of the crop is 28,200 tones with an average yield of 445 kg/ha. Yield at the national level is very low, about one-half of the world's yield, which is mainly due to non-availability of high yield potential genotypes. Keeping in view the importance of mutants in developing a large number of new varieties, an induced mutations programme was initiated at AEARC, Tandojam during 1987-88, to develop high yielding varieties in lentil. For this, seeds of two lentil varieties, 'Masoor-85' and 'ICARDA-8' had been irradiated with gamma-rays ranging from 100-600 Gy in NIAB, Faisalabad during 1990. Selections were made in M2 on the basis of earliness, plant height, branches/plant and 100 grain weight. After confirming these mutants in M3 they were promoted in station yield trials and studied continuously for three consecutive years (1993- 1995). Overall results revealed that these mutants have consistent improvement of earliness in flowering and maturity. Plant height also increased in all mutant lines except AEL 23/40/91 where reduction in this attribute was observed as compared to parent variety. Mutant lines AEL 49/20/91 and AEL 13/30/91 showed improvement in 100 grain weight. The improvement of some agronomic characters enhanced the yield of mutant lines in comparison to parent varieties (Masoor-85 and ICARDA-8). The diversity in yield over the respective parents was computed from 6.94 to 60.12%. From these encouraging results it is hoped that mutant lines like AEL 12/30/91 and AEL 49/20/91 may serve as potential lentil genotypes in future. (author)
National Land Cover Database (NLCD) Percent Tree Canopy Collection

Data.gov (United States)

U.S. Geological Survey, Department of the Interior — The National Land Cover Database (NLCD) Percent Tree Canopy Collection is a product of the U.S. Forest Service (USFS), and is produced through a cooperative project...
Simultaneous Reduction in Noise and Cross-Contamination Artifacts for Dual-Energy X-Ray CT

Directory of Open Access Journals (Sweden)

Baojun Li

2013-01-01

Full Text Available Purpose. Dual-energy CT imaging tends to suffer from much lower signal-to-noise ratio than single-energy CT. In this paper, we propose an improved anticorrelated noise reduction (ACNR method without causing cross-contamination artifacts. Methods. The proposed algorithm diffuses both basis material density images (e.g., water and iodine at the same time using a novel correlated diffusion algorithm. The algorithm has been compared to the original ACNR algorithm in a contrast-enhanced, IRB-approved patient study. Material density accuracy and noise reduction are quantitatively evaluated by the percent density error and the percent noise reduction. Results. Both algorithms have significantly reduced the noises of basis material density images in all cases. The average percent noise reduction is 69.3% and 66.5% with the ACNR algorithm and the proposed algorithm, respectively. However, the ACNR algorithm alters the original material density by an average of 13% (or 2.18 mg/cc with a maximum of 58.7% (or 8.97 mg/cc in this study. This is evident in the water density images as massive cross-contaminations are seen in all five clinical cases. On the contrary, the proposed algorithm only changes the mean density by 2.4% (or 0.69 mg/cc with a maximum of 7.6% (or 1.31 mg/cc. The cross-contamination artifacts are significantly minimized or absent with the proposed algorithm. Conclusion. The proposed algorithm can significantly reduce image noise present in basis material density images from dual-energy CT imaging, with minimized cross-contaminations compared to the ACNR algorithm.
Effects of Different Amounts of Nitrogen and Azotobarvar on Growth Characteristics and Yield of Chickpea (Cicer arietinum L.

Directory of Open Access Journals (Sweden)

ghobad mohammadpoor

2017-09-01

Full Text Available Introduction One of the most important agricultural efforts is to minimize the use of chemicals nitrogen fertilizers and to replace it with biological nitrogen fertilizers to produce healthy productions. In dry conditions the use of industrial nitrogen fertilizers depends on the amount of rainfall and consumed cautiously. Low consumption of nitrogen sources reduce crop growth and yield and higher than optimum applications of chemical Nitrogen sources can cause many environmental disorders. This is while Azotobacter as a soil bacteria also fixes nitrogen, produce vitamins, growth hormones and antibiotics and also increases the photosynthesis, plant growth and grain yield and reduces the need to application of chemical Nitrogen. Materials and Methods In order to study the effect of biological and industrial nitrogen fertilizers on growth, yield and yield components of chickpea (Bivanij variety, an experiment was conducted with split plot arrangement based on randomized complete block design (RCBD with four replications under rainfed conditions in the Telesm village, Dalahoo, Kermanshah, during 2013 agricultural season. Climate of the region is temperate and semi-arid with 535.6 mm of rainfall. Soil texture is clay - loam with 0.02 percent of nitrogen. Basic amount of Nitrogen fertilizer was considered 30 Kg.ha-1 Urea and four levels of chemical nitrogen fertilizers including: %50 of base fertilizer, %100 of base fertilizer, %150 of base fertilizer and no fertilizer (control were assumed as main plot factors. Similarly, the basic amount of Azotobarvar bio-fertilizer was considered as 100 g.ha-1 and four levels of it including %50 of base fertilizer, %100 of base fertilizer, %150 of base fertilizer and no bio-fertilizer (control were assumed as sub plot factors. Bio-fertilizers are inoculated to seeds and planting was done manually on 19 March 2013. Density was considered 40 plants per square meter with 25 cm intervals between rows and 10 cm on the
Automated multispectra alpha spectrometer and data reduction system

International Nuclear Information System (INIS)

Hochel, R.C.

1975-12-01

A complete hardware and software package for the accumulation and rapid analysis of multiple alpha pulse height spectra has been developed. The system utilizes a 4096-channel analyzer capable of accepting up to sixteen inputs from solid-state surface barrier detectors via mixer-router modules. The analyzer is interfaced to a desk-top programmable calculator and thermal line printer. A chained software package including spectrum printout, peak analysis, plutonium-238 and plutonium-239 data reduction, and automatic energy calibration routines was written. With the chained program a complete printout, peak analysis, and plutonium data reduction of a 512-channel alpha spectrum are obtained in about three minutes with an accuracy within five percent of hand analyses
Upland rice yield as affected by Brachiaria coverage management

Directory of Open Access Journals (Sweden)

Adriano S. Nascente

2015-01-01

Full Text Available An important point in no-tillage system is the time between cover crop glyphosate desiccation and rice sowing. This study aimed to verify the effect of Brachiaria ruziziensis management time before rice sowing on rice yield and its components. The experiment was conducted under greenhouse conditions and consisted of four types of B. ruziziensis management: with Brachiaria and with herbicide (WBWH, without Brachiaria shoots and with herbicide (NBWH, without Brachiaria shoots and without herbicide (NBNH, and with Brachiaria and without herbicide (WBNH, at four times: 30, 20, 10, and 0 days, preceding the rice sowing. The amount of B. ruziziensis dry matter increased as the management was done closer to the rice sowing date. The WBWH and WBNH managements (this one causes the lowest rice grain yield must be done 30 days before rice sowing; while NBWH management must be done ten or more days before rice sowing. On the other hand, NBNH management (this one favors the best rice grain yield can be done until rice sowing day. Despite some reduction in rice yield caused by the B. ruziziensis management, when it was done at the proper time the rice grain yield was similar to the control (without Brachiaria sowing and without herbicide application.
Modeling percent tree canopy cover: a pilot study

Science.gov (United States)

John W. Coulston; Gretchen G. Moisen; Barry T. Wilson; Mark V. Finco; Warren B. Cohen; C. Kenneth Brewer

2012-01-01

Tree canopy cover is a fundamental component of the landscape, and the amount of cover influences fire behavior, air pollution mitigation, and carbon storage. As such, efforts to empirically model percent tree canopy cover across the United States are a critical area of research. The 2001 national-scale canopy cover modeling and mapping effort was completed in 2006,...
Effect of climatic change and afforestation on water yield in the Rocky Mountain Area of North China

Directory of Open Access Journals (Sweden)

Yang Zhao

2015-04-01

Full Text Available Aim of study: We studied effects of climatic variability and afforestation on water yield to make a quantitative assessment of the hydrological effects of afforestation on basin water yield in the Rocky Mountain Area of North China. Area of study: Seven typical forest sub-watersheds in Chaobai River watershed, located near Beijing’s Miyun Reservoir, were selected as our study object. Material and methods: Annual water yield model and Separate evaluation method were applied to quantify the respective contributions of changes in climate and different vegetation types on variations in runoff. Main results: Statistical analysis indicated precipitation did not vary significantly whereas the annual runoff decreased significantly in the past decades. Although forest increased significantly in the late 20th century, climatic variations have the strongest contribution to the reductions in runoff, with the average contribution reaching 63.24%, while the remainder caused by human activities. Afforestation has a more positive impact on the reduction in runoff, with a contribution of 65.5%, which was more than the grassland of 17.6% and the farmland of 16.9%. Research highlights: Compared to the impact of climatic change, we believe the large-scale afforestation may not be the main reason for the reductions in basin water yield.
Impacts of climate change on peanut yield in China simulated by CMIP5 multi-model ensemble projections

Science.gov (United States)

Xu, Hanqing; Tian, Zhan; Zhong, Honglin; Fan, Dongli; Shi, Runhe; Niu, Yilong; He, Xiaogang; Chen, Maosi

2017-09-01

Peanut is one of the major edible vegetable oil crops in China, whose growth and yield are very sensitive to climate change. In addition, agriculture climate resources are expected to be redistributed under climate change, which will further influence the growth, development, cropping patterns, distribution and production of peanut. In this study, we used the DSSAT-Peanut model to examine the climate change impacts on peanut production, oil industry and oil food security in China. This model is first calibrated using site observations including 31 years' (1981-2011) climate, soil and agronomy data. This calibrated model is then employed to simulate the future peanut yield based on 20 climate scenarios from 5 Global Circulation Models (GCMs) developed by the InterSectoral Impact Model Intercomparison Project (ISIMIP) driven by 4 Representative Concentration Pathways (RCPs). Results indicate that the irrigated peanut yield will decrease 2.6% under the RCP 2.6 scenario, 9.9% under the RCP 4.5 scenario and 29% under the RCP 8.5 scenario, respectively. Similarly, the rain-fed peanut yield will also decrease, with a 2.5% reduction under the RCP 2.6 scenario, 11.5% reduction under the RCP 4.5 scenario and 30% reduction under the RCP 8.5 scenario, respectively.
Yield Estimation of Sugar Beet Based on Plant Canopy Using Machine Vision Methods

Directory of Open Access Journals (Sweden)

S Latifaltojar

2014-09-01

Full Text Available Crop yield estimation is one of the most important parameters for information and resources management in precision agriculture. This information is employed for optimizing the field inputs for successive cultivations. In the present study, the feasibility of sugar beet yield estimation by means of machine vision was studied. For the field experiments stripped images were taken during the growth season with one month intervals. The image of horizontal view of plants canopy was prepared at the end of each month. At the end of growth season, beet roots were harvested and the correlation between the sugar beet canopy in each month of growth period and corresponding weight of the roots were investigated. Results showed that there was a strong correlation between the beet yield and green surface area of autumn cultivated sugar beets. The highest coefficient of determination was 0.85 at three months before harvest. In order to assess the accuracy of the final model, the second year of study was performed with the same methodology. The results depicted a strong relationship between the actual and estimated beet weights with R2=0.94. The model estimated beet yield with about 9 percent relative error. It is concluded that this method has appropriate potential for estimation of sugar beet yield based on band imaging prior to harvest
Effect of Fungicide Applications on Grain Sorghum (Sorghum bicolor L. Growth and Yield

Directory of Open Access Journals (Sweden)

Dan D. Fromme

2017-01-01

Full Text Available Field studies were conducted in the upper Texas Gulf Coast and in central Louisiana during the 2013 through 2015 growing seasons to evaluate the effects of fungicides on grain sorghum growth and development when disease pressure was low or nonexistent. Azoxystrobin and flutriafol at 1.0 L/ha and pyraclostrobin at 0.78 L/ha were applied to the plants of two grain sorghum hybrids (DKS 54-00, DKS 53-67 at 25% bloom and compared with the nontreated check for leaf chlorophyll content, leaf temperature, and plant lodging during the growing season as well as grain mold, test weight, yield, and nitrogen and protein content of the harvested grain. The application of a fungicide had no effect on any of the variables tested with grain sorghum hybrid responses noted. DKS 53-67 produced higher yield, greater test weight, higher percent protein, and N than DKS 54-00. Results of this study indicate that the application of a fungicide when little or no disease is present does not promote overall plant health or increase yield.
CRED Cumulative Map of Percent Scleractinian Coral Cover at Sarigan

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This map displays optical validation observation locations and percent coverage of scleractinian coral overlaid on bathymetry.
CRED Cumulative Map of Percent Scleractinian Coral Cover at Saipan

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This map displays optical validation observation locations and percent coverage of scleractinian coral overlaid on bathymetry.

CRED Cumulative Map of Percent Scleractinian Coral Cover at Tutuila

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This map displays optical validation observation locations and percent coverage of scleractinian coral overlaid on bathymetry.
CRED Cumulative Map of Percent Scleractinian Coral Cover at Anatahan

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This map displays optical validation observation locations and percent coverage of scleractinian coral overlaid on bathymetry.
CRED Cumulative Map of Percent Scleractinian Coral Cover at Alamagan

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This map displays optical validation observation locations and percent coverage of scleractinian coral overlaid on bathymetry.
CRED Cumulative Map of Percent Scleractinian Coral Cover at Agrihan

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This map displays optical validation observation locations and percent coverage of scleractinian coral overlaid on bathymetry.
CRED Cumulative Map of Percent Scleractinian Coral Cover at Pagan

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This map displays optical validation observation locations and percent coverage of scleractinian coral overlaid on bathymetry.
CRED Cumulative Map of Percent Scleractinian Coral Cover at Asuncion

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This map displays optical validation observation locations and percent coverage of scleractinian coral overlaid on bathymetry.
CRED Cumulative Map of Percent Scleractinian Coral Cover at Aguijan

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This map displays optical validation observation locations and percent coverage of scleractinian coral overlaid on bathymetry.
Cost-Reduction Roadmap for Residential Solar Photovoltaics (PV), 2017-2030

Energy Technology Data Exchange (ETDEWEB)

Cook, Jeffrey J. [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Ardani, Kristen B. [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Margolis, Robert M. [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Fu, Ran [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2018-01-03

The installed cost of solar photovoltaics (PV) has fallen rapidly in recent years and is expected to continue declining in the future. In this report, we focus on the potential for continued PV cost reductions in the residential market. From 2010 to 2017, the levelized cost of energy (LCOE) for residential PV declined from 52 cents per kilowatt-hour (cents/kWh) to 16 cents/kWh (Fu et al. 2017). The U.S. Department of Energy's (DOE's) Solar Energy Technologies Office (SETO) recently set new LCOE targets for 2030, including a target of 5 cents/kWh for residential PV. We present a roadmap for achieving the SETO 2030 residential PV target. Because the 2030 target likely will not be achieved under business-as-usual trends (NREL 2017), we examine two key market segments that demonstrate significant opportunities for cost savings and market growth: installing PV at the time of roof replacement and installing PV as part of the new home construction process. Within both market segments, we identify four key cost-reduction opportunities: market maturation, business model integration, product innovation, and economies of scale. To assess the potential impact of these cost reductions, we compare modeled residential PV system prices in 2030 to the National Renewable Energy Laboratory's (NREL's) quarter one 2017 (Q1 2017) residential PV system price benchmark (Fu et al. 2017). We use a bottom-up accounting framework to model all component and project-development costs incurred when installing a PV system. The result is a granular accounting for 11 direct and indirect costs associated with installing a residential PV system in 2030. All four modeled pathways demonstrate significant installed-system price savings over the Q1 2017 benchmark, with the visionary pathways yielding the greatest price benefits. The largest modeled cost savings are in the supply chain, sales and marketing, overhead, and installation labor cost categories. When we translate these
Genotype X Environment Interaction for Yield of Pickling Cucumber in 24 U.S. Environments

Directory of Open Access Journals (Sweden)

Dia Mahendra

2018-02-01

Full Text Available Reliable yield performance is important in cucumber because seed companies prefer to market cultivars adapted to multiple rather than single regions of the U.S. Also, growers benefit by using a cultivar that performs well in many environments. Future performance of cultivars is also important. The objectives of the study were to (i evaluate the yield of cucumber genotypes over successive years and in different locations, and (ii identify cucumber genotypes with high stability for yield. A diverse set of 22 pickling genotypes was evaluated over 3 years (1986, 1987 and 1988 and in 7 locations across the United States. Yield traits were evaluated using once-over harvest and counting the number of fruit that were marketable, culled or oversize. Total yield, marketable yield (total minus culled fruit, early yield (number of oversize fruit, percent culls and fruit per plant were calculated. Data were analyzed with SASGxE and RGxE programs using SAS and R programming languages, respectively. There were strong effects of environment(E as well as genotype(G xE interaction for all traits. Genotypes ‘Regal F1’, ‘Calypso F1’, ‘Carolina F1’, ‘Gy 3’, ‘Gy 14’ and ‘Fremont F1’ had high marketable yield and medium to high stability for all traits. There was an advantage of hybrids over inbreds for trait performance. Hybrids fell into a single cluster with large prediction intervals. Based on the stability statistics and divisive clusters, it appears possible to breed stable cucumber genotypes with high yield. The genotype with highest performance for marketable yield, greatest stability for yield, lowest 1-R2 ratio value (diverse and representative were ‘Marbel F1’ and Gy 14.
Completion of the first approach to critical for the seven percent critical experiment

International Nuclear Information System (INIS)

Barber, A. D.; Harms, G. A.

2009-01-01

The first approach-to-critical experiment in the Seven Percent Critical Experiment series was recently completed at Sandia. This experiment is part of the Seven Percent Critical Experiment which will provide new critical and reactor physics benchmarks for fuel enrichments greater than five weight percent. The inverse multiplication method was used to determine the state of the system during the course of the experiment. Using the inverse multiplication method, it was determined that the critical experiment went slightly supercritical with 1148 fuel elements in the fuel array. The experiment is described and the results of the experiment are presented. (authors)
A numerical integration-based yield estimation method for integrated circuits

International Nuclear Information System (INIS)

Liang Tao; Jia Xinzhang

2011-01-01

A novel integration-based yield estimation method is developed for yield optimization of integrated circuits. This method tries to integrate the joint probability density function on the acceptability region directly. To achieve this goal, the simulated performance data of unknown distribution should be converted to follow a multivariate normal distribution by using Box-Cox transformation (BCT). In order to reduce the estimation variances of the model parameters of the density function, orthogonal array-based modified Latin hypercube sampling (OA-MLHS) is presented to generate samples in the disturbance space during simulations. The principle of variance reduction of model parameters estimation through OA-MLHS together with BCT is also discussed. Two yield estimation examples, a fourth-order OTA-C filter and a three-dimensional (3D) quadratic function are used for comparison of our method with Monte Carlo based methods including Latin hypercube sampling and importance sampling under several combinations of sample sizes and yield values. Extensive simulations show that our method is superior to other methods with respect to accuracy and efficiency under all of the given cases. Therefore, our method is more suitable for parametric yield optimization. (semiconductor integrated circuits)
A numerical integration-based yield estimation method for integrated circuits

Energy Technology Data Exchange (ETDEWEB)

Liang Tao; Jia Xinzhang, E-mail: tliang@yahoo.cn [Key Laboratory of Ministry of Education for Wide Bandgap Semiconductor Materials and Devices, School of Microelectronics, Xidian University, Xi' an 710071 (China)

2011-04-15

A novel integration-based yield estimation method is developed for yield optimization of integrated circuits. This method tries to integrate the joint probability density function on the acceptability region directly. To achieve this goal, the simulated performance data of unknown distribution should be converted to follow a multivariate normal distribution by using Box-Cox transformation (BCT). In order to reduce the estimation variances of the model parameters of the density function, orthogonal array-based modified Latin hypercube sampling (OA-MLHS) is presented to generate samples in the disturbance space during simulations. The principle of variance reduction of model parameters estimation through OA-MLHS together with BCT is also discussed. Two yield estimation examples, a fourth-order OTA-C filter and a three-dimensional (3D) quadratic function are used for comparison of our method with Monte Carlo based methods including Latin hypercube sampling and importance sampling under several combinations of sample sizes and yield values. Extensive simulations show that our method is superior to other methods with respect to accuracy and efficiency under all of the given cases. Therefore, our method is more suitable for parametric yield optimization. (semiconductor integrated circuits)
WHK Student Internship Enrollment, Mentor Participation Up More than 50 Percent | Poster

Science.gov (United States)

By Nancy Parrish, Staff Writer The Werner H. Kirsten Student Internship Program (WHK SIP) has enrolled the largest class ever for the 2013–2014 academic year, with 66 students and 50 mentors. This enrollment reflects a 53 percent increase in students and a 56 percent increase in mentors, compared to 2012–2013 (43 students and 32 mentors), according to Julie Hartman, WHK SIP
Evaluation of Yield and Chemical Characteristics of some Peanut Mutants Induced by Gamma Irradiation

International Nuclear Information System (INIS)

Abd El-daem, G.A.; Anwar, M.M.

2013-01-01

This study was conducted to evaluate some promising mutants in peanut for yielding ability over three generation (M5, M6 and M7) and to evaluate yield attributes as will as chemical characteristics of these mutants in M7 generation induced by 100 Gy gamma radiation. The obtained results showed that the increase of yield / plot over three generation as a percentage of control was 5% for mutant 7, 10.2 % for mutant 10; 22% for mutant 9 and 22.9% for mutant 8. This increase in yield may be due to increase of one or more of yield attributes for most mutant lines. The significant increase for. No .of pods and seeds/ plant, weight of pods and seeds/ plant and 100- seed weight in M7 as compared to the control. For saturated fatty acid composition, results revealed that total saturated fatty acids ranged from 17.79% for mutant 8 to 21.75 for mutant 2 compared to 24.21% for control. Reduction of total saturated fatty acid was noticed for different mutants compared to that of the original variety. However, for total unsaturated fatty acids, results indicated that total unsaturated fatty acid composition ranged from 77.95% for mutant 9 to 82.09% for mutant 8 compared to 75.49% for control. Higher total unsaturated fatty acids for all mutant lines were obtained than that of the control, however, total saturated (TS)/ total unsaturated (TU) ratio was decreased for all mutants compared to control. The physical and chemical contents of Peanut oils showed that the refractive indices were ranged from 1.4620 to 1.4718 specific gravity were in range of 0.9146 to 0.9177. Acid value was range from 0.54 to 0.89% lodine value was ranged from 94.56 to 101.85. Saponification value was ranged from 185.2 to 190.7 and unsaponifiable matter was ranged from 0.98 to 1.33. The peroxide values ranged from 1.15 to 2.33 meq/kg oil. Also, fortified yoghurt made with replaced mutant peanut oil by 50% as milk fat substitute. Data showed that chemical composition and organolyptic properties had the
The autoprotonation in reduction mechanism of pesticide ioxynil

Energy Technology Data Exchange (ETDEWEB)

Sokolova, Romana, E-mail: sokolova@jh-inst.cas.c [J. Heyrovsky Institute of Physical Chemistry, v.v.i., Academy of Sciences of the Czech Republic, Dolejskova 3, 18223 Prague (Czech Republic); Hromadova, Magdalena; Ludvik, Jiri; Pospisil, Lubomir [J. Heyrovsky Institute of Physical Chemistry, v.v.i., Academy of Sciences of the Czech Republic, Dolejskova 3, 18223 Prague (Czech Republic); Giannarelli, Stefania [Department of Chemistry and Industrial Chemistry, University of Pisa, Via Risorgimento 35, 56100 Pisa (Italy)

2010-11-30

The reduction mechanism of ioxynil (3,5-diiodo-4-hydroxy-benzonitrile) was studied in dimethylsulfoxide using the electrochemical methods (tast polarography, cyclic voltammetry and controlled potential electrolysis) combined with GC/MS identification of products. The reduction is accompanied by the cleavage of iodide yielding 3-iodo-4-hydroxybenzonitrile. Surprisingly, this process requires only one electron for the exhaustive electrolysis of the starting compound. We showed that the apparent one electron reduction observed in the aprotic solvent is due to the autoprotonation by another molecule of ioxynil. The overall one electron reduction (uptake of two electrons per two molecules of ioxynil) is changed in the presence of a strong proton donor to a two electron process per one molecule.
Identification of target genes to control acetate yield during aerobic fermentation with Saccharomyces cerevisiae.

Science.gov (United States)

Curiel, José Antonio; Salvadó, Zoel; Tronchoni, Jordi; Morales, Pilar; Rodrigues, Alda Joao; Quirós, Manuel; Gonzalez, Ramón

2016-09-15

Aerobic fermentation of grape must, leading to respiro-fermentative metabolism of sugars, has been proposed as way of reducing alcohol content in wines. Two factors limit the usefulness of Saccharomyces cerevisiae for this application, the Crabtree effect, and excess volatile acidity under aerobic conditions. This work aimed to explore the impact on ethanol acetate production of different S. cerevisiae strains deleted for genes previously related with the Crabtree phenotype. Recombinant strains were constructed on a wine industrial genetic background, FX10. All yeast strains, including FX10, showed respiro-fermentative metabolism in natural grape must under aerobic conditions, as well as a concomitant reduction in ethanol yield. This indicates that the Crabtree effect is not a major constrain for reaching relevant respiration levels in grape must. Indeed, only minor differences in ethanol yield were observed between the original and some of the recombinant strains. In contrast, some yeast strains showed a relevant reduction of acetic acid production. This was identified as a positive feature for the feasibility of alcohol level reduction by respiration. Reduced acetic acid production was confirmed by a thorough analysis of these and some additional deletion strains (involving genes HXK2, PYK1, REG1, PDE2 and PDC1). Some recombinant yeasts showed altered production of glycerol and pyruvate derived metabolites. REG1 and PDC1 deletion strains showed a strong reduction of acetic acid yield in aerobic fermentations. Since REG1 defective strains may be obtained by non-GMO approaches, these gene modifications show good promise to help reducing ethanol content in wines.
The Effects of Different Nitrogen Sources on Yield and Yield Components of Sweet Corn (Zea mays L. saccharata

Directory of Open Access Journals (Sweden)

ali mojab ghasroddashti

2017-09-01

percent level calculated for mean comparison. Results and Discussion Results indicated that the different sources of nitrogen had significant effect on the number of grains per row and the number of grains per ear as well as ear and canned yield except for the number of ears per m2 and number of row per ear. Mean comparison indicated that the highest ear yield (2178 g.m-2 was obtained in the treatments of 100 kg N + 4 tons of poultry manure (T6 and the lowest yield (1188 g.m-2 in control (T9. Using of organic sources of nitrogen with chemical fertilizer led to increase ear yield. In other words, integrated treatments had better effect on yield than chemical and organic treatments. In addition, the highest canned harvest index (42.8 ton.ha-1 and ear harvest index (48.7 ton.ha-1 was related to 100 kg net nitrogen + 12 ton municipal solid waste compost (T8 treatments. Municipal solid waste compost and poultry manure in the 100 and 150 kg nitrogen levels caused to increase of canned harvest index and ear harvest index. This matter is indicative more effect of municipal solid waste compost than poultry manure on two indices.Generally, the combined use of organic manures and chemical fertilizers could be an appropriate method to increase sweet corn yield and soil fertility. According to the obtained results, T6 treatment can be recommended. Conclusion Based on the obtained results, it seems that single application of organic fertilizers cannot lead to maximum yield, therefore, to obtain the optimal yield integrated application of organic and chemical fertilizers (T6 can be recommended for farmers in the region.
Nitrogen efficiency in oats on grain yield with stability

Directory of Open Access Journals (Sweden)

José A. G. da Silva

Full Text Available ABSTRACT Nitrogen (N is the nutrient most absorbed by the oat crop. Unfavorable climate conditions decrease its efficiency, generating instability and reduction in yield. The objective of this study was to improve N use efficiency in oat grain yield by the economic value of the product and of the input and by models that scale the stability, considering systems of succession of high and reduced residual-N release in favorable and unfavorable years for cultivation. The study was conducted in the years 2013, 2014 and 2015 in two systems of succession (soybean/oat, maize/oat in randomized blocks with eight replicates, using the N-fertilizer doses of 0, 30, 60 and 120 kg ha-1. The N-fertilizer dose for maximum economic efficiency in oats should be considered based on the meteorological trends of the cultivation year. N use optimization by models that determine the stability is an innovative proposal to increase fertilization efficiency on the yield. The N-fertilizer dose of 60 kg ha-1 promotes greater efficiency with predictability and yield, regardless of the agricultural year and the system of succession.
Concentrations, loads, and yields of select constituents from major tributaries of the Mississippi and Missouri Rivers in Iowa, water years 2004-2008

Science.gov (United States)

Garrett, Jessica D.

2012-01-01

suspended sediment, increased with streamflow. Nitrogen concentrations (total nitrogen and nitrate plus nitrite) increased with low and moderate streamflows, but decreased with high streamflows. Seasonal patterns observed in constituent concentrations were affected by streamflow, algae blooms, and pesticide application. The various landform regions produced different water-quality responses across the study basins; for example, total phosphorus, suspended sediment, and turbidity were greatest from the steep, loess-dominated southwestern Iowa basins. Nutrient concentrations, though not regulated for drinking water at the study sites, were high compared to drinking-water limits and criteria for protection of aquatic life proposed for other Midwestern states (Iowa criteria for aquatic life have not been proposed). Nitrate plus nitrite concentrations exceeded the drinking-water limit [10 milligrams per liter (mg/L)] in 11 percent of all samples at the 10 sites, and exceeded Minnesota's proposed aquatic life criteria (4.9 mg/L) in 68 percent of samples. The Wisconsin standard for total phosphorus (0.1 mg/L) was exceeded in 92 percent of samples. Ammonia standards, current during sample collection and at publication of this report, for protection of aquatic life were met for all samples, but draft criteria proposed in 2009 to protect more sensitive species like mussels, were exceeded at three sites. Loads and yields also differed among sites and years. The Big Sioux, Little Sioux, and Des Moines Rivers produced the greatest sulfate yields. Mississippi River tributaries had greater chloride yields than Missouri River tributaries. The Big Sioux River also had the lowest silica yields and total nitrogen and nitrate yields, whereas nitrogen yields were greater in the northeastern rivers. The Boyer and Nishnabotna River total phosphorus yields were the greatest in the study. The Boyer River orthophosphate yields were greatest except in 2008, when the Maquoketa River produced the
Topotactic reduction yielding black titanium oxide nanostructures as metallic electronic conductors.

Science.gov (United States)

Tominaka, Satoshi

2012-10-01

Detailed analyses of reduced, single crystal, rutile-type TiO(2) via high-resolution transmission electron microscopy (TEM) are reported which reveal that the reduction proceeds topotactically via interstitial diffusion of Ti ions at low temperature, around 350 °C. This important finding encouraged the production of various nanostructured reduced titanium oxides from TiO(2) precursors with morphology retention, and in the process, the synthesis of black titanium oxide nanorods using TiO(2) nanorods was demonstrated. Interestingly, as opposed to the semiconductive behavior of Ti(2)O(3) synthesized at high temperature, topotactically synthesized Ti(2)O(3) exhibits metallic electrical resistance, and the value at room temperature is quite low (topotactically synthesized Ti(2)O(3). This work shows that topotactically reduced titanium oxides can have fascinating properties as well as nanostructures.

A comparison of methods of determining the 100 percent survival of preserved red cells

International Nuclear Information System (INIS)

Valeri, C.R.; Pivacek, L.E.; Ouellet, R.; Gray, A.

1984-01-01

Studies were done to compare three methods to determine the 100 percent survival value from which to estimate the 24-hour posttransfusion survival of preserved red cells. The following methods using small aliquots of 51 Cr-labeled autologous preserved red cells were evaluated: First, the 125 I-albumin method, which is an indirect measurement of the recipient's red cell volume derived from the plasma volume measured using 125 I-labeled albumin and the total body hematocrit. Second, the body surface area method (BSA) in which the recipient's red cell volume is derived from a body surface area nomogram. Third, an extrapolation method, which extrapolates to zero time the radioactivity associated with the red cells in the recipient's circulation from 10 to 20 or 15 to 30 minutes after transfusion. The three methods gave similar results in all studies in which less than 20 percent of the transfused red cells were nonviable (24-hour posttransfusion survival values of between 80-100%), but not when more than 20 percent of the red cells were nonviable. When 21 to 35 percent of the transfused red cells were nonviable (24-hour posttransfusion survivals of 65 to 79%), values with the 125 I-albumin method and the body surface area method were about 5 percent lower (p less than 0.001) than values with the extrapolation method. When greater than 35 percent of the red cells were nonviable (24-hour posttransfusion survival values of less than 65%), values with the 125 I-albumin method and the body surface area method were about 10 percent lower (p less than 0.001) than those obtained by the extrapolation method
Effect Of Gamma Radiation On Plant Mineral Content And Yield Of Barley Grown Under Saline Conditions

International Nuclear Information System (INIS)

Charabaji, T.; Khalifa, K.; Al-Ain, F.

2004-01-01

A field experiment was conducted at Al-Hijanah, an area located at about 35 km south east of Damascus. Seeds of two barley varieties [Arabi Abiad (AA) and Pakistani PK 30163 (PK)] were irradiated with 2 doses 0 and 15 Gy of gamma irradiation. They were sown on saline soil (16.4-18.7 dS/m) and irrigated with saline water ( 7-8 dS/m) A dose of 15 Gy of gamma irradiation was shown to positively effect the percent germination of PK but had no similar effect on AA. -Physiological Maturity Stage: The same dose (15 Gy) increased shoot dry weight, but had a negative effect on K + and Na + contents in the PK variety. As for the AA variety, Mg ++ and P contents were increased, whereas Na + and Cl- were slightly decreased. -Harvest Stage: Gamma irradiation had a positive effect on total yield, grain yield, nitrogen yield and harvest index of the PK variety. A positive effect was produced on straw yield, 1000-grain weight and N% of a Avariety. (Authors)
PHOTOSYNTHETIC EFFICIENCY IN JUVENILE STAGE AND WINTER BARLEY BREEDING FOR IMPROVED GRAIN YIELD AND STABILITY

Directory of Open Access Journals (Sweden)

Josip Kovačević

2011-06-01

Full Text Available Photosynthetic efficiency parameters (Fv/Fm, ET0/ABS and PIABS were investigated at the end of tillering stage of winter barley grown in stress environment (21.3% vol. water content of soil and control (water content 30.4% vol. in relation to grain yield per vegetative pot. The trial was conducted in vegetative pots according to the RBD method of two-factorial experiment with 10 winter barley cultivars (7 tworowed and 3 six-rowed and 2 treatments in 3 repetitions. The stressed variant was exposed to water reduction three times (end of tillering stage, flag leaf to beginning of heading stage, grain filling stage. From sowing to maturity, the air temperature varied from -3.9°C to 32.9°C and water content from 16.4 % to 39.0 % of soil volume in vegetative pot. Significant differences were found for grain yield among the cultivars. The short-term drought stress caused significant reductions in grain yield per pot. The photosynthetic efficiency parameters were significant between cultivars, but significant effects for treatments and interaction were only detected for the Fv/Fm parameter. Photosynthetic efficiency parameters did not have significant correlation coefficients with grain yield and its stability in both treatments. Stability indexes of the parameters PIABS and Fv/Fm had positive but not significant correlations with grain yield in stressed variant (0.465 and 0.452 and stability index of grain yield (0.337 and 0.481.
Comparison of reduction agents in the synthesis of infinite-layer LaNiO2 films

Science.gov (United States)

Ikeda, Ai; Manabe, Takaaki; Naito, Michio

2014-11-01

Reduction agents, such as activated carbon, TiH2, and CaH2, were compared from a viewpoint of the facility for the topotactic reduction of LaNiO3 to LaNiO2 films. Activated carbon did not yield infinite-layer LaNiO2 whereas both of TiH2 and CaH2 yielded infinite-layer LaNiO2 with low resistivity (∼1 mΩ cm at 300 K) as well as metallic behavior down to 70 K. Thermal desorption spectroscopy indicated that H2 released from metal hydrides plays a dominant role in the topotactic reduction.
Maize growth and yield in Peshawar under changing climate

International Nuclear Information System (INIS)

Shah, A.; Akmal, M.; Asim, M.

2012-01-01

Global climate change is consequence of accumulating greenhouse gases (Carbon) at lower atmosphere which might affects crops growth and yield. Maize is an important summer cereals, grown on considerable area in Pakistan every year. We, therefore, study the delay sowing response with changing climate on maize. Field experiment was conducted at Agronomy Research Farm, Agricultural University Peshawar, Pakistan in a randomized complete block design. Sowing was done from June 8 to July 24, 2010 with ten days intervals. Mazie (cv. Azam) was planted in rows at 0.75 m distance in NS orientations. Crop was raised under the uniform recommended cultural practices. Data regarding days to emergence, tasseling and maturity showed a consecutive decrease when so wing was delayed form June 08 onwards. However, the crop life cycle (i.e. vegetative and reproductive durations) initially remained uniform but expanded for late sowing dates (July). Delay sowing showed an increase in the leaf area index with an abrupt decline for the late sown crop. Nonetheless, plant stand at harvest remained static during the growth for all sowing dates. A stable to moderate reduction was noticed in ear length (cm) when sowings was delayed from Jun 08 onwards. Grain rows cob/-1 did not influence by the delay sowing in the season. Moreover, delay sowing did not show any significant (P<0.05) change for the grain number. However, thousand grains weight was initially remained stable but declined (P<0.05) by delay in sowing. Biological yield, dry matter and grains yield (g m/sup -2/) revealed almost a similar decreasing trend when sowing was delayed. Dry matter to grain yield relationship was linear (r/sup 2/ = 0.95) and revealed a mean loss of 1.65 g m/sup 2/ when sowing delayed from June 08 to July 24 in the season. Radiation use efficiency (RUE), the growth function, was also declined by the delay in sowing. We inferred that losses in leaf area indices, ear length and grain weights were basis of the
Response of high yielding rice varieties to NaCl salinity in ...

African Journals Online (AJOL)

STORAGESEVER

2008-11-05

Nov 5, 2008 ... the percentage of fertility, stem weight and white grain weight (Kavousi, 1995). ... yield falling in accordance with rising salinity or electrical conduction of ... Due to the effect of salinity on height reduction and its significant effect ..... leaf elongation in maize Is not Mediated by changes in cell wall. Acidification ...
Relativistic dynamical reduction models and nonlocality

International Nuclear Information System (INIS)

Ghirardi, G.C.; Grassi, R.

1990-09-01

We discuss some features of continuous dynamical models yielding state vector reduction and we briefly sketch some recent attempts to get a relativistic generalization of them. Within the relativistic context we analyze in detail the local an nonlocal features of the reduction mechanism and we investigate critically the possibility of attributing objective properties to individual systems in the micro and macroscopic cases. At the nonrelativistic level, two physically equivalent versions of continuous reduction mechanisms have been presented. However, only one of them can be taken as a starting point for the above considered relativistic generalization. By resorting to counterfactual arguments we show that the reason for this lies in the fact that the stochasticity involved in the two approaches has different conceptual implications. (author). 7 refs, 4 figs
Quantification of ozone exposure- and stomatal uptake-yield response relationships for soybean in Northeast China.

Science.gov (United States)

Zhang, Weiwei; Feng, Zhaozhong; Wang, Xiaoke; Liu, Xiaobing; Hu, Enzhu

2017-12-01

High ground-level O 3 is a new threat to agricultural production in Northeast China with the increasing ambient O 3 concentration. Little is known about its impacts on soybean production in this key agricultural region. Accumulated O 3 exposure-response and stomatal O 3 flux-response relationships were developed during two continuous growing seasons to evaluate O 3 -induced yield reduction of four typical soybean cultivars in Northeast China. Results showed that critical levels of AOT40 (accumulated hourly O 3 concentrations over a threshold of 40nmol·mol -1 ), SUM06 (sum of all hourly average O 3 concentrations over 0.06μmol·mol -1 ) and W126 (sum of O 3 concentrations weighted by a sigmoidal function) in relation to 5% reduction in relative seed yield were 4.2, 7.6 and 6.8μmol·mol -1 ·h, respectively. The effect of O 3 on plants was influenced by leaf position in canopy. An improved Jarvis stomatal conductance model including leaf (node) position fitted well with field measurements. The best linear relationship between stomatal O 3 flux and relative soybean yield was obtained when phytotoxic ozone dose was integrated over a threshold of 9.6nmol·m -2 ·s -1 (POD 9.6 ) to represent the detoxification capacity of soybean. POD 9.6 and the commonly used POD 6 in relation to 5% reduction in relative seed yield of soybean were 0.9mmol·m -2 and 1.8mmol·m -2 , respectively. O 3 concentrations above ~38nmol·mol -1 contributed to POD 9.6 and caused seed yield loss in soybean. Current annual yield loss of soybean at ambient O 3 was estimated to range between 23.4% and 30.2%. The O 3 dose-response relationships and corresponding thresholds obtained here will benefit regional O 3 risk assessment on soybean production in Northeast China. Copyright © 2017 Elsevier B.V. All rights reserved.
Carcass yield traits of kids from a complete diallel of Boer, Kiko, and Spanish meat goat breeds semi-intensively managed on humid subtropical pasture.

Science.gov (United States)

Browning, R; Phelps, O; Chisley, C; Getz, W R; Hollis, T; Leite-Browning, M L

2012-03-01

Bucklings (n = 275) from a complete diallel of Boer, Kiko, and Spanish meat goats were slaughtered at 7 mo of age (4 mo postweaning) to evaluate genetic effects on carcass yield. Breed of sire did not affect (P > 0.05) live, carcass, and primal weights. Conversely, breed of dam was a consistently significant source of variation for carcass weight traits. Kiko dams produced kids with heavier (P 0.05) from Boer or Kiko. Subjective conformation scores for muscularity were affected (P 0.05) by breeds of sire or dam. Direct effects of Boer were negative for carcass weight, dressing percent, and shoulder weight and positive for proportional leg weight. Direct effects of Kiko were positive for carcass weight and shoulder weight and negative for proportional leg weight. Direct effects of Spanish did not differ (P > 0.10) from 0 for any trait tested. Heterosis levels were similar among breed pairings. Heterosis was substantial (P ≤ 0.05) for live, carcass, and primal weights (5 to 9%) but not for dressing percent, proportional boneless meat yield, or primal weight proportions (genetic variation was observed among goat breeds for carcass yield traits. Dam breed was more influential than sire breed. Boer germplasm was not superior to Kiko or Spanish germplasm for carcass yield when semi-intensively managed on humid, subtropical pasture. Results emphasize the importance of comparative breed evaluations to provide industry with reliable information on carcass yield among goat genotypes.
Effects of UV-B radiation on soybean yield and seed quality: a 6-year field study

International Nuclear Information System (INIS)

Teramura, A.H.; Sullivan, J.H.; Lydon, J.

1990-01-01

Two soybean [Glycine max (L.) Merr.] cultivars, Essex and Williams, were grown in the field for 6 consecutive seasons under ambient and supplemental levels of ultravio-Set-B radiation to determine the potential for alterations in yield or seed quality with a reduction in the stratospheric ozone column. The supplemental UV-B fluences simulated a 16 or 25% ozone depletion. The data presented here represent the first field experiment conducted over multiple seasons which assesses the effects of increased UV-B radiation on seed yield. Overall, the cultivar Essex was found to be sensitive to UV-B radiation (yield reductions of 20%) while the cultivar Williams was tolerant. However, the effectiveness of UV-B radiation in altering yield was strongly influenced by the seasonal microclimate, and the 2 cultivars responded differently to these changing factors. Yield was reduced most in Essex during seasons in which water availability was high and was reduced in Williams only when water was severely limiting. The results of these experiments demonstrate the necessity for multiple-year experiments and the need to increase our understanding of the interaction between UV-B radiation and other environmental stresses in order to assess the potential consequences of stratospheric ozone depletion. (author)
Optimizing rice yields while minimizing yield-scaled global warming potential.

Science.gov (United States)

Pittelkow, Cameron M; Adviento-Borbe, Maria A; van Kessel, Chris; Hill, James E; Linquist, Bruce A

2014-05-01

To meet growing global food demand with limited land and reduced environmental impact, agricultural greenhouse gas (GHG) emissions are increasingly evaluated with respect to crop productivity, i.e., on a yield-scaled as opposed to area basis. Here, we compiled available field data on CH4 and N2 O emissions from rice production systems to test the hypothesis that in response to fertilizer nitrogen (N) addition, yield-scaled global warming potential (GWP) will be minimized at N rates that maximize yields. Within each study, yield N surplus was calculated to estimate deficit or excess N application rates with respect to the optimal N rate (defined as the N rate at which maximum yield was achieved). Relationships between yield N surplus and GHG emissions were assessed using linear and nonlinear mixed-effects models. Results indicate that yields increased in response to increasing N surplus when moving from deficit to optimal N rates. At N rates contributing to a yield N surplus, N2 O and yield-scaled N2 O emissions increased exponentially. In contrast, CH4 emissions were not impacted by N inputs. Accordingly, yield-scaled CH4 emissions decreased with N addition. Overall, yield-scaled GWP was minimized at optimal N rates, decreasing by 21% compared to treatments without N addition. These results are unique compared to aerobic cropping systems in which N2 O emissions are the primary contributor to GWP, meaning yield-scaled GWP may not necessarily decrease for aerobic crops when yields are optimized by N fertilizer addition. Balancing gains in agricultural productivity with climate change concerns, this work supports the concept that high rice yields can be achieved with minimal yield-scaled GWP through optimal N application rates. Moreover, additional improvements in N use efficiency may further reduce yield-scaled GWP, thereby strengthening the economic and environmental sustainability of rice systems. © 2013 John Wiley & Sons Ltd.
Evaluation of Yield and Yield Components of Oilseed Rape in the Wheat-Oilseed Rape Strip Intercropping Influenced by Chemical and Biological Fertilizers

Directory of Open Access Journals (Sweden)

R Amirmardfar

2015-01-01

Full Text Available To evaluate the effects of wheat (Triticum aestivum and oilseed rape (Brassica napus strip intercropping on yield components, seed and biological yields of oilseed rape, field experiments were carried out as factorial based on randomized complete block design with three replications at Research Farm of Tabriz University, Tabriz, Iran during 2010-2012 cropping seasons. The first factor consisted of four types of wheat and oilseed rape cropping system, sole crop of oilseed rape (A1,: strip intercropping with 8:3 (A2, 12:4 (A3 and 16:5 (A4 of wheat and oilseed rape rows, respectively and the other factor consisted of two fertilizer levels, B1: 100% chemical fertilizers (urea and triple superphosphate and B2: 50% chemical fertilizers + biofertilizers (Nitrazhin and Barvar2. The results showed that strip intercropping of wheat- oilseed rape resulted in significant increase in yield components, seed yield per occupied unit area and biological yield per occupied unit area of oilseed rape as compared with mono-cropping. The number of silique per plant in intercropping systems was significantly higher than that of mono-cropping. The highest seed yield was obtained in the 16:5 rows of wheat-oilseed rape with 343.76 g.m-2 and the lowest mean was observed in mono-cropping of oilseed rape with 260.21 g.m-2. Biological yield per occupied unit area and seed yield per intercropped unit area in B1 were significantly greater than that of B2, but this treatment had no significant effect on the other traits. Because, B1 and B2 had no significant difference in seed yield per occupied unit area and due to the importance of reduction in chemical fertilizers consumption and food and environmental health care, strip intercropping of wheat-oilseed rape under 50% chemical fertilizers + biofertilizers can be recommended as a suitable cultural method.
Age-specific association between percent body fat and pulmonary ...

African Journals Online (AJOL)

This study describes the association between percent body fat and pulmonary function among apparently normal twenty male children tidal volume aged 4 years and twenty male children aged 10 years in Ogbomoso. The mean functional residual capacity of the lung in male children aged 10 years was significantly higher ...
Identification of a novel percent mammographic density locus at 12q24.

Science.gov (United States)

Stevens, Kristen N; Lindstrom, Sara; Scott, Christopher G; Thompson, Deborah; Sellers, Thomas A; Wang, Xianshu; Wang, Alice; Atkinson, Elizabeth; Rider, David N; Eckel-Passow, Jeanette E; Varghese, Jajini S; Audley, Tina; Brown, Judith; Leyland, Jean; Luben, Robert N; Warren, Ruth M L; Loos, Ruth J F; Wareham, Nicholas J; Li, Jingmei; Hall, Per; Liu, Jianjun; Eriksson, Louise; Czene, Kamila; Olson, Janet E; Pankratz, V Shane; Fredericksen, Zachary; Diasio, Robert B; Lee, Adam M; Heit, John A; DeAndrade, Mariza; Goode, Ellen L; Vierkant, Robert A; Cunningham, Julie M; Armasu, Sebastian M; Weinshilboum, Richard; Fridley, Brooke L; Batzler, Anthony; Ingle, James N; Boyd, Norman F; Paterson, Andrew D; Rommens, Johanna; Martin, Lisa J; Hopper, John L; Southey, Melissa C; Stone, Jennifer; Apicella, Carmel; Kraft, Peter; Hankinson, Susan E; Hazra, Aditi; Hunter, David J; Easton, Douglas F; Couch, Fergus J; Tamimi, Rulla M; Vachon, Celine M

2012-07-15

Percent mammographic density adjusted for age and body mass index (BMI) is one of the strongest risk factors for breast cancer and has a heritable component that remains largely unidentified. We performed a three-stage genome-wide association study (GWAS) of percent mammographic density to identify novel genetic loci associated with this trait. In stage 1, we combined three GWASs of percent density comprised of 1241 women from studies at the Mayo Clinic and identified the top 48 loci (99 single nucleotide polymorphisms). We attempted replication of these loci in 7018 women from seven additional studies (stage 2). The meta-analysis of stage 1 and 2 data identified a novel locus, rs1265507 on 12q24, associated with percent density, adjusting for age and BMI (P = 4.43 × 10(-8)). We refined the 12q24 locus with 459 additional variants (stage 3) in a combined analysis of all three stages (n = 10 377) and confirmed that rs1265507 has the strongest association in the 12q24 region (P = 1.03 × 10(-8)). Rs1265507 is located between the genes TBX5 and TBX3, which are members of the phylogenetically conserved T-box gene family and encode transcription factors involved in developmental regulation. Understanding the mechanism underlying this association will provide insight into the genetics of breast tissue composition.
Nonsurgical reduction of the interventricular septum in patients with hypertrophic cardiomyopathy.

Science.gov (United States)

Shamim, Waqar; Yousufuddin, Mohammed; Wang, Duolao; Henein, Michael; Seggewiss, Hubert; Flather, Marcus; Coats, Andrew J S; Sigwart, Ulrich

2002-10-24

In patients with hypertrophic cardiomyopathy and obstruction of the left ventricular outflow tract, nonsurgical reduction of the septum is a treatment option when medical therapy has failed. We investigated the long-term effects of nonsurgical reduction of the septum on functional capacity and electrocardiographic and echocardiographic characteristics. Sixty-four consecutive patients with hypertrophic cardiomyopathy and a mean (+/-SD) age of 48.5+/-17.2 years underwent nonsurgical reduction of the septum by injection of ethanol into the septal perforator branch of the left anterior descending coronary artery. These patients were assessed by exercise testing, electrocardiography, and resting and dobutamine (stress-induced) echocardiography after a mean period of 3.0+/-1.3 years. At follow-up, patients had significant improvements in New York Heart Association class, peak oxygen consumption (from 18.4+/-5.8 to 30.0+/-4.4 ml per kilogram of body weight per minute, P<0.001), and left ventricular outflow tract gradients (resting gradient, from 64+/-36 to 16+/-15 mm Hg; P<0.001; stress-induced gradient, from 132+/-34 to 45+/-19 mm Hg; P<0.001). Procedure-related complications included right bundle-branch block in all patients, complete heart block in 31 patients (48 percent), and significant increases in QRS and corrected QT intervals. Seventeen patients (27 percent) required permanent pacing. R-wave amplitude was significantly decreased (from 32+/-8 to 17+/-7 mV, P<0.001). The dimensions of the left ventricular cavity increased, and the interventricular septal thickness was reduced. Nonsurgical septal reduction leads to sustained improvements in both subjective and objective measures of exercise capacity in association with a persistent reduction in resting and stress-induced left ventricular outflow tract gradients. It is also associated with a high incidence of procedure-related complete heart block, however, often requiring permanent pacing. Copyright 2002
Safflower (Carthamus tinctorius L. yield as affected by nitrogen fertilization and different water regimes

Directory of Open Access Journals (Sweden)

Reginaldo Ferreira-Santos

2018-04-01

Full Text Available Due to its origin and hardiness, safflower is usually cultivated in low-fertility soils with few inputs and no irrigation. In Brazil, little is known about its response to nitrogen (N and irrigation. This study was carried out near the city of Engenheiro Coelho, SP, Brazil, in 2014, in order to determine the effect of increasing nitrogen application rates (0, 50, 100, 150, 200, 250, 300, 350, 400, 450, 500, 550 and 600 kg ha-1 on safflower cultivation under irrigation and rainfed conditions. The use of irrigation during drought periods allowed stress reduction and significantly increased yield components and grain yield. Safflower yield was influenced by the interaction between water regimes and nitrogen rates. Grain yield may vary depending on several factors, however, maximum yield was achieved with rates of 208 and 214 kg N ha-1 under irrigation and rainfed conditions, respectively. For oil yield, 200 kg N ha-1 were sufficient, regardless of the water regime.
SERIAL PERCENT-FREE PSA IN COMBINATION WITH PSA FOR POPULATION-BASED EARLY DETECTION OF PROSTATE CANCER

Science.gov (United States)

Ankerst, Donna Pauler; Gelfond, Jonathan; Goros, Martin; Herrera, Jesus; Strobl, Andreas; Thompson, Ian M.; Hernandez, Javier; Leach, Robin J.

2016-01-01

PURPOSE To characterize the diagnostic properties of serial percent-free prostate-specific antigen (PSA) in relation to PSA in a multi-ethnic, multi-racial cohort of healthy men. MATERIALS AND METHODS 6,982 percent-free PSA and PSA measures were obtained from participants in a 12 year+ Texas screening study comprising 1625 men who never underwent biopsy, 497 who underwent one or more biopsies negative for prostate cancer, and 61 diagnosed with prostate cancer. Area underneath the receiver-operating-characteristic-curve (AUC) for percent-free PSA, and the proportion of patients with fluctuating values across multiple visits were determined according to two thresholds (under 15% versus 25%) were evaluated. The proportion of cancer cases where percent-free PSA indicated a positive test before PSA > 4 ng/mL did and the number of negative biopsies that would have been spared by percent-free PSA testing negative were computed. RESULTS Percent-free PSA fluctuated around its threshold of PSA tested positive earlier than PSA in 71.4% (34.2%) of cancer cases, and among men with multiple negative biopsies and a PSA > 4 ng/mL, percent-free PSA would have tested negative in 31.6% (65.8%) instances. CONCLUSIONS Percent-free PSA should accompany PSA testing in order to potentially spare unnecessary biopsies or detect cancer earlier. When near the threshold, both tests should be repeated due to commonly observed fluctuation. PMID:26979652
Warming and nitrogen fertilization effects on winter wheat yields in northern China varied between four years

DEFF Research Database (Denmark)

Liu, Liting; Hu, Chunsheng; Olesen, Jørgen E

2013-01-01

per m2. This suggests that the wheat yield loss may be related to reduction of spike number, which was affected by decreased soil water content under warming. Warming tended to give larger yield reductions at higher nitrogen fertilizer rates, and this may be related to larger water consumption...... with both higher nitrogen and temperature leading to water shortages. These effects indicate that wheat yield loss from warming was primarily associated with more severe water shortage from greater evapotranspiration under warming. The large crop canopy in the fertilized plot may further have enhanced......). The volumetric water content decreased significantly before heading by 9.3, 3.9, 2.4 and 1.2 vol% in the soil depth of 0.10, 0.20, 0.40, 0.60 m in N2 and by 5.9, 1.4, 1.3 and 1.2 vol% in N1 from heating compared with no heating. The duration of the entire growth period was shortened by on average 7 days...
Evaluation of the effect of the reduction of the hip spastic dislocation in adolescent and young adult with cerebral paralysis

International Nuclear Information System (INIS)

Contreras Calderon, Jose; Zambrano, Gladis Cecilia; Villanueva, Erland; Turriago, Camilo Andres

2006-01-01

We present the results obtained in the Instituto de Ortopedia Infantil Roosevelt for the treatment of the hip dislocation in adolescent patients and young adults with spastic cerebral palsy with the open reduction of the hip, accompanied by femoral osteotomy and, if as necessary, pelvic osteotomy. 14 hips (10 patients) were intervened from January of 1996 to July of 2003. Pain was completely released in 54 percent and improved in 36 percent of cases. Abduction improved in 63 percent of patients allowing the perinea cleaning in 63 percent and better tolerance to scar in 64% of the cases. Our complications were one patient developed a sacred pressure ulcer with the spica cast treated with a free flap transposition; one hip had redislocation at 31 months from surgery; another hip had instability without clinical repercussion; one patient had a not displaced supracondylar femoral fracture treated with immobilization. The results of our study showed that the open reduction of the spastic hip in adolescents and young adults is a procedure that improves, in most of the cases, the stability, mobility and pain of the hip and provides better quality life for these patients
Acid-catalyzed reductive amination of aldoses with 8-aminopyrene-1,3,6-trisulfonate.

Science.gov (United States)

Evangelista, R A; Guttman, A; Chen, F T

1996-02-01

The reductive amination of monosaccharides with 8-aminopyrene-1,3,6-trisulfonate (APTS) in seven different organic acids including the commonly used acetic acid was investigated by capillary electrophoresis (CE) with laser-induced fluorescence (LIF) detection. The correlation between the yields of the saccharide-APTS adducts and pKa of the organic acid catalyst is consistent with general acid catalysis of the rate-determining step of the reductive amination reaction. Derivatization in the presence of organic acids of higher strength than acetic acid produced substantially higher yields of APTS-sugar adducts, an effect which is more pronounced for N-acetylamino sugars. Optimum yields were obtained using citric acid as a catalyst. Conversion of a few nanomoles of neutral saccharides to the APTS derivatives is achieved at 75 degrees C in less than 60 min.

Evaluation of Thiobacillus Bacteria and Mycorrhizal Symbiosis on Yield and Yield Components of Garlic (Allium sativum at Different Levels of Sulfur

Directory of Open Access Journals (Sweden)

parvin Hejazi rad

2017-09-01

weight increased significantly at 75s and 1505 in combination with Thiobacillus and mycorrhiza. Also the effects of 150S and150S + M, 150S + T were significant on tuber dry weight. The highest tuber dry weight was obtained in combination of 150S with Thiobacillus and mycorrhiza. The effect of 75s was not significant on tuber dry weight but application of 150S increased significantly dry tuber weight (about 50% over the control plots. Adding Thiobacillus to sulfur treatments (75s and 1505 had a significant effect on tuber dry weight and increased about 38 and 72 percent compared to the control, respectively. Chlorophylla content increased significantly in all treatments compare to the control. While the effects of 150S + M, 150S + T, 150S + M + T were significant on chlorophyllb. The effects of 75S, 75S + M, 75S + T, 75S + M + T, 150S, 150S + M, 150S + T and 150S + M + T were significant on carotenoid. Allicin yield increased significantly in all treatments except mycorrhiza compared to the control. Application of 150 kg sulfur per hectare +Thiobacillus+mycorrhizas increased essential oil yield up to 3 times compare to the control. As a result the essential oil yield increased significantly in treatments of 75 and 150 kg sulfur per hectare compared to the control. Conclusion Tuber dry weight increased significantly with sulfur application in combination with Thiobacillus and mycorrhiza. Chlorophylla content increased significantly in all treatments. Allicin yield increased significantly in all treatments except mycorrhiza. Application of sulfur, increased essential oil yield.
Study of reduction and complexation of technetium in the presence of humate

International Nuclear Information System (INIS)

Tkac, P.

2003-06-01

Reduction of pertechnetate was studied by different reduction systems: Sn 2+ , Fe 2+ , ascorbic acid, mixture of ascorbic acid and Fe 3+ , and thiourea. Reduction of pertechnetate by Sn 2+ ions (5 · 10 -2 - 5 · 10 -7 mol.dm -3 ) was studied in pH range of 0.94-6.4. For effective reduction of Tc(VII) an acidic environment (pH 2+ ions higher than 1 · 10 -5 mol.dm-3 was necessary. Reduction of Tc(VII) by Fe 2+ (0.01 mol.dm -3 FeSO 4 ) was strongly dependent on pH and for reduction yield higher than 95 %, pH = 8 and higher was needed. In the presence of ascorbic acid (1 - 5 %) no significant reduction was observed. When a 5 % solution of ascorbic acid was prepared by dilution of ascorbic acid in 2 mol.dm -3 HCl, 60 % reduction after 30 minutes of reaction was observed. Reduction of Tc(VII) in the presence of ascorbic acid was most effectively observed in the presence of Fe 3+ ions. The yield of reduction was about 98 % after 20 minutes of reaction. Reduction of pertechnetate by thiourea was studied in acidic solution (HCl). Different conditions were used for reduction of 99m TcO 4 - and 99 TcO 4 - , respectively. The best yield for a routine preparation of [ 99 Tc(tu) 6 ] 3+ (tu = thiourea) was observed when 70 mg of thiourea was dissolved in 5 ml of 0.5 mol.dm -3 HCl and 0.2 - 0.5 ml of 6 · 10 -2 mol.dm -3 TcO 4 - was added. The mixture was allowed to react at least 20 hours. In the case of 99m Tc, 35 mg of thiourea was diluted in 5 ml of 2 mol.dm -3 HCl and 0.1 - 0.5 ml of pertechnetate generator solution was added. Reaction mixture was heated at 100 grad C for at least 30 minutes under nitrogen atmosphere. The yield of pertechnetate reduction for both preparation methods was about 99 %. The thiourea complex of technetium was chosen for preparation of technetium-humic complex, because it is well known as the most suitable precursor for preparation of new technetium complexes with Tc 3+ . Gel chromatography of natrium humate was carried out before preparation of
CRED Cumulative Map of Percent Scleractinian Coral Cover at Kauai, 2005

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This map displays optical validation observation locations and percent coverage of scleractinian coral overlaid on bathymetry.
CRED Cumulative Map of Percent Scleractinian Coral Cover at Niihau, 2005

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This map displays optical validation observation locations and percent coverage of scleractinian coral overlaid on bathymetry.
CRED Cumulative Map of Percent Scleractinian Coral Cover at Stingray Shoals

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This map displays optical validation observation locations and percent coverage of scleractinian coral overlaid on bathymetry.
CRED Cumulative Map of Percent Scleractinian Coral Cover at Molokai, 2005

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This map displays optical validation observation locations and percent coverage of scleractinian coral overlaid on bathymetry.
CRED Cumulative Map of Percent Scleractinian Coral Cover at Ofu & Olosega

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This map displays optical validation observation locations and percent coverage of scleractinian coral overlaid on bathymetry.
CRED Cumulative Map of Percent Scleractinian Coral Cover at Ta'u

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This map displays optical validation observation locations and percent coverage of scleractinian coral overlaid on bathymetry.
CRED Cumulative Map of Percent Scleractinian Coral Cover at Guam, 2003

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This map displays optical validation observation locations and percent coverage of scleractinian coral overlaid on bathymetry.
Yield trends and yield gap analysis of major crops in the world

OpenAIRE

Hengsdijk, H.; Langeveld, J.W.A.

2009-01-01

This study aims to quantify the gap between current and potential yields of major crops in the world, and the production constraints that contribute to this yield gap. Using an expert-based evaluation of yield gaps and the literature, global and regional yields and yield trends of major crops are quantified, yield gaps evaluated by crop experts, current yield progress by breeding estimated, and different yield projections compared. Results show decreasing yield growth for wheat and rice, but ...
Equity yields

NARCIS (Netherlands)

Vrugt, E.; van Binsbergen, J.H.; Koijen, R.S.J.; Hueskes, W.

2013-01-01

We study a new data set of dividend futures with maturities up to ten years across three world regions: the US, Europe, and Japan. We use these asset prices to construct equity yields, analogous to bond yields. We decompose the equity yields to obtain a term structure of expected dividend growth
Frustrated Lewis pairs-assisted reduction of carbonyl compounds

DEFF Research Database (Denmark)

Marek, Ales; Pedersen, Martin Holst Friborg

2015-01-01

An alternative and robust method for the reduction of carbonyl groups by frustrated Lewis pairs (FLPs) is reported in this paper. With its very mild reaction conditions, good to excellent yields, absolute regioselectivity and the non-metallic character of the reagent, it provides an excellent too...
Aerial imaging for FABs: productivity and yield aspects

Science.gov (United States)

Englard, Ilan; Cohen, Yaron; Elblinger, Yair; Attal, Shay; Berns, Neil; Shoval, Lior; Ben-Yishai, Michael; Mangan, Shmoolik

2009-03-01

The economy of wafer fabs is changing faster for 3x geometry requirements and below. Mask set and exposure tool costs are almost certain to increase the overall cost per die requiring manufacturers to develop productivity and yield improvements to defray the lithography cell economic burden. Lithography cell cost effectiveness can be significantly improved by increasing mask availability while reducing the amount of mask sets needed during a product life cycle. Further efficiency can be gained from reducing send-ahead wafers and qualification cycle time, and elimination of inefficient metrology. Yield is the overriding die cost modulator and is significantly more sensitive to lithography as a result of masking steps required to fabricate the integrated circuit. Thus, for productivity to increase with minimal yield risk, the sample space of reticle induced source of variations should be large, with shortest measurement acquisition time possible. This paper presents the latest introduction of mask aerial imaging technology for the fab, Aera2TM for Lithography with IntenCTM, as an enabler for efficient lithography manufacturing. IntenCD is a high throughput, high density mask-based critical dimension (CD) mapping technology, with the potential for increasing productivity and yield in a wafer production environment. Connecting IntenCD to a feed forward advance process control (APC) reduces significantly the amount of traditional CD metrology required for robust wafer CD uniformity (CDU) correction and increases wafer CD uniformity. This in turn improves the lithography process window and yield and contributes to cost reduction and cycle time reduction of new reticles qualification. Advanced mask technology has introduced a new challenge. Exposure to 193nm wavelength stimulates haze growth on the mask and imposes a regular cleaning schedule. Cleaning eventually causes mask degradation. Haze growth impacts mask CD uniformity and induce global transmission fingerprint
Effects of Sowing Date, Planting Pattern and Nitrogen Levels on Leaf and Flower Essential Oil, Yield and Component Yield Grain of Buckwheat (Fagopyroum esculentum Moench

Directory of Open Access Journals (Sweden)

M. R Sobhani

2017-12-01

Full Text Available Introduction Buckwheat which has been scientifically named Fagopyrum esculentum can be considered as a yearling broad-leaved plant belonging to the family of Polygonaceae which is known as false Cereal. Its seeds are in use as a nutritional and medicinal product that is due to the rutin content of them. As the population is rapidly increasing worldwide, a solution must be found to supply necessary food. What agriculture science is responsible for is to produce more products with better quality in order to meet this increasing population’s needs so that food poverty and starvation are more likely to be removed and keep food safety. Considering the fact that buckwheat is of a variety of medical, industrial and food applications and in our country and some other ones, it has not been seriously cultivated, this plant must be used as a new plant and it should be extensively applied in multiple planting systems (summer planting for commercial goals through producing seeds while its nutritional value is more than grain and it can be regarded as a rich source of high quality protein, amino acid necessary for lysine, high starch percent, minerals and vitamins for different applications involving cake flour, frumenty and soup and improving the optimal rate of rutin as a secondary metabolite having effective medical features concerning our country’s climatic conditions. Materials and Methods In order to investigate the effects of sowing date, planting patterns and nitrogen on leaf and flower rutin, yield and yield component of Buckwheat plant, a field study was conducted during 2010 and 2011 in Agricultural Research Institute of Arak, Iran. The experimental design was regarded as the randomized complete block design in the form of split plot factorial with three replications. Planting treatments as the fundamental elements may be implemented at two levels including the mounds with the width of 50 cm associated with two planting rows regarding the
Analysis association of milk fat and protein percent in quantitative ...

African Journals Online (AJOL)

SAM

2014-05-14

May 14, 2014 ... African Journal of Biotechnology. Full Length ... quantitative trait locus (QTLs) on chromosomes 1, 6, 7 and 20 in ... Protein and fat percent as content of milk are high-priority criteria for financial aims and selection of programs ...
A reductive aminase from Aspergillus oryzae

Science.gov (United States)

Aleku, Godwin A.; France, Scott P.; Man, Henry; Mangas-Sanchez, Juan; Montgomery, Sarah L.; Sharma, Mahima; Leipold, Friedemann; Hussain, Shahed; Grogan, Gideon; Turner, Nicholas J.

2017-10-01

Reductive amination is one of the most important methods for the synthesis of chiral amines. Here we report the discovery of an NADP(H)-dependent reductive aminase from Aspergillus oryzae (AspRedAm, Uniprot code Q2TW47) that can catalyse the reductive coupling of a broad set of carbonyl compounds with a variety of primary and secondary amines with up to >98% conversion and with up to >98% enantiomeric excess. In cases where both carbonyl and amine show high reactivity, it is possible to employ a 1:1 ratio of the substrates, forming amine products with up to 94% conversion. Steady-state kinetic studies establish that the enzyme is capable of catalysing imine formation as well as reduction. Crystal structures of AspRedAm in complex with NADP(H) and also with both NADP(H) and the pharmaceutical ingredient (R)-rasagiline are reported. We also demonstrate preparative scale reductive aminations with wild-type and Q240A variant biocatalysts displaying total turnover numbers of up to 32,000 and space time yields up to 3.73 g l-1 d-1.
Effect of Seed Priming on Sugar Beet Root Yield under Low Irrigation and Presence of Weed

Directory of Open Access Journals (Sweden)

ali absalan

2017-09-01

that priming improved root yield under condition of reduction of irrigation water and the presence of weeds in both areas. The results showed that priming methods caused reducing yield losing of the roots in the presence of weeds. In this regard, treatment of running water for 48 hours + Seed-start did better in both areas. Conclusions In the end, due to the positive effects of priming, such as running water 48 hours and Seed-start on quantitative yield of sugar beet these methods are recommended. Materials and Methods: In the spring of 1393, a field trial was conducted simultaneously in two regions of the Jovain and Jajarm.The experimental was conducted as split plot (split-split plot in randomized complete block design with three replications.The main factor was irrigation with four levels of 100, 90, 80 and 70% water,sub-plots are including different methods of priming: control, priming with running water for 48 hours, priming with running water for 48 hours + Humic acid, priming with running water for 48 hours + Seed-start and priming with running water for 48 hours + Humic acid + Fulzym, sub-sub plots are including weeds competition with (absence and presence of weeds. Results and Discussion: The results for two regions showed that by reducing the amount of irrigation water sugar beet tuber yield significantly reduced. Results show that the effect of priming treatment of running water for 48 hours + Seed-start and running water for 48 hours + Humic acid + Fulzym to have achieved the highest sugar beet tuber yield for two areas. The result of the interaction effect showed that priming improved tuber yield under condition of reduction of irrigation water and the presence of weeds in both areas. The results showed that priming methods caused reducing yield losing of the tubers in the presence of weeds. In this regard, treatment of running water for 48 hours + Seed-start did better in both areas. Conclusions: In the end, due to the positive effects of priming, such as
Photochemical reductions of benzil and benzoin in the presence of triethylamine and TiO2 photocatalyst

International Nuclear Information System (INIS)

Park, Joon Woo; Kim, Eun Kyung; Koh Park, Kwang Hee

2002-01-01

This paper reports the photochemical reduction of benzil 1 to benzoin 2 and the reduction of 2 to hydrobenzoin 4 in deoxygenated solvents in the presence of triethylamine (TEA) and/or TiO 2 . Without TEA or TiO 2 , the photolysis of 1 resulted in very low yield of 2. The presence of TEA or TiO 2 increased the rate of disappearance of 1 and the yield of 2, which were further increased considerably by the presence of water. The photoreduction of 1 to 2 proceeds through an electron transfer to 1 from TEA or hole-scavenged excited TiO 2 followed by protonation. In the reaction medium of 88:7:2:3 CH 3 CN/CH 3 OH/H 2 O/TEA with 2.5 mg/mL of TiO 2 , the yield of 2 was as high as 85% at 50% conversion of 1. The photolysis of 2 in homogeneous media resulted in photo-cleavage to benzoyl and hydroxybenzyl radicals, which are mostly converted to benzaldehyde. The reduction product 4 is formed in low yield through the dimerization of hydroxybenzyl radicals. The addition of TEA increased the conversion rate of 2 and the yield of 4 significantly. This was attributed to the scavenging effect of TEA for benzoyl radical to produce N,N-diethylbenzamide and the photoreduction of benzaldehyde in the presence of TEA. The ratio of (±) and meso isomers of 4 obtained from the photochemical reaction is about 1.1. This ratio is the same as that from the photochemical reduction of benzaldehyde in the presence of TEA. In the TiO 2 -sensitized photochemical reduction of 2, meso-4 was obtained in moderate yield. The reduction of 2 to 4 proceeds through two consecutive electron/proton transfer processes on the surface of the photocatalyst without involvement of α-cleavage. The radical 11 initially formed from 2 by one electron/proton process can also combine with hydroxy methyl radical, which is generated after hole trapping of excited TiO 2 by methanol, to product 1,2-diphenylpropenone after dehydration reaction
ANALYSIS OF PARAMETERIZATION VALUE REDUCTION OF SOFT SETS AND ITS ALGORITHM

Directory of Open Access Journals (Sweden)

Mohammed Adam Taheir Mohammed

2016-02-01

Full Text Available In this paper, the parameterization value reduction of soft sets and its algorithm in decision making are studied and described. It is based on parameterization reduction of soft sets. The purpose of this study is to investigate the inherited disadvantages of parameterization reduction of soft sets and its algorithm. The algorithms presented in this study attempt to reduce the value of least parameters from soft set. Through the analysis, two techniques have been described. Through this study, it is found that parameterization reduction of soft sets and its algorithm has yielded a different and inconsistency in suboptimal result.
Catalytic reduction of 4-nitrophenol over Ni-Pd nanodimers supported on nitrogen-doped reduced graphene oxide

Energy Technology Data Exchange (ETDEWEB)

Liu, Lijun, E-mail: liulj@wtu.edu.cn [College of Chemistry and Chemical Engineering, Wuhan Textile University, Wuhan 430073, People' s Republic of China (China); Department of Chemical and Petroleum Engineering, University of Pittsburgh, Pittsburgh, PA 15261 (United States); Chen, Ruifen; Liu, Weikai [College of Chemistry and Chemical Engineering, Wuhan Textile University, Wuhan 430073, People' s Republic of China (China); Wu, Jiamin [Department of Chemical and Petroleum Engineering, University of Pittsburgh, Pittsburgh, PA 15261 (United States); Gao, Di, E-mail: gaod@pitt.edu [Department of Chemical and Petroleum Engineering, University of Pittsburgh, Pittsburgh, PA 15261 (United States)

2016-12-15

Catalytic reduction of toxic 4-nitrophenol to 4-aminophenol over magnetically recoverable nanocatalysts has attracted much attention. Herein, we report a Ni-Pd/NrGO catalyst through the growth of Ni-Pd nanodimers (NDs) on nitrogen-doped reduced graphene oxide (NrGO). The Ni-Pd NDs show a heterogeneous nanostructure with Ni and Pd subparts contacting with each other, remarkably different from the frequently-observed core/shell nanoparticles (NPs) or nanoalloy. The formation of Ni-Pd NDs follows an initial deposition of Pd NPs on the graphene and in-situ catalytic generation of Ni subparts over the newly-generated Pd NPs. The resulting Ni-Pd/NrGO exhibits a superior catalytic activity towards the reduction of 4-nitrophenol at room temperature with a high rate constant (3400 s{sup -1} g{sup -1}) and a low activated energy (29.1 kJ mol{sup -1}) as compared to unsupported Ni-Pd NDs and supported monometallic catalysts. The conversion rate of 4-NP is calculated to be 99.5% and the percent yield (%) of 4-AP is as high as 99.1%. A synergistic catalysis mechanism is rationally proposed, which is ascribed to the electronic modification of Ni-Pd metals due to the strong metal/support interaction (SMSI) effect as well as the electron transfer between Ni and Pd. The hybrid catalyst shows soft ferromagnetic properties and can be magnetically separated and recycled without obvious loss of activity.

Simulation of Water Quality in the Tull Creek and West Neck Creek Watersheds, Currituck Sound Basin, North Carolina and Virginia

Science.gov (United States)

Garcia, Ana Maria

2009-01-01

A study of the Currituck Sound was initiated in 2005 to evaluate the water chemistry of the Sound and assess the effectiveness of management strategies. As part of this study, the Soil and Water Assessment Tool (SWAT) model was used to simulate current sediment and nutrient loadings for two distinct watersheds in the Currituck Sound basin and to determine the consequences of different water-quality management scenarios. The watersheds studied were (1) Tull Creek watershed, which has extensive row-crop cultivation and artificial drainage, and (2) West Neck Creek watershed, which drains urban areas in and around Virginia Beach, Virginia. The model simulated monthly streamflows with Nash-Sutcliffe model efficiency coefficients of 0.83 and 0.76 for Tull Creek and West Neck Creek, respectively. The daily sediment concentration coefficient of determination was 0.19 for Tull Creek and 0.36 for West Neck Creek. The coefficient of determination for total nitrogen was 0.26 for both watersheds and for dissolved phosphorus was 0.4 for Tull Creek and 0.03 for West Neck Creek. The model was used to estimate current (2006-2007) sediment and nutrient yields for the two watersheds. Total suspended-solids yield was 56 percent lower in the urban watershed than in the agricultural watershed. Total nitrogen export was 45 percent lower, and total phosphorus was 43 percent lower in the urban watershed than in the agricultural watershed. A management scenario with filter strips bordering the main channels was simulated for Tull Creek. The Soil and Water Assessment Tool model estimated a total suspended-solids yield reduction of 54 percent and total nitrogen and total phosphorus reductions of 21 percent and 29 percent, respectively, for the Tull Creek watershed.
Influence of Climate Factors on Rice Yields in Cambodia

Directory of Open Access Journals (Sweden)

Dek Vimean Pheakdey

2017-12-01

Full Text Available Temperature and precipitation have been known as the key determinant factors to affect rice production in climate change. In this study, the relationship between climate variables and rice yields during 1993–2012 in Cambodia was analyzed and evaluated. The Ordinary Least Squares analysis was applied to examine the relationship of three climate variables (TCV including maximum temperature, minimum temperature and rainfall against seasonal rice yields. By this period, a remarkable increasing trend of annual temperature was observed whilst rainfall was not significantly changed. The TCV explains approximately 63% and 56% of the variability of rice yields in wet and dry seasons, respectively. It is found that in Cambodia, non-climate factors such as fertilizers, water, cultivars, and soil fertility cause 40% variation to rice yields, whereas the remaining 60% can be influenced by climate variability. The levels of temperature difference (LTD between maximum and minimum temperatures of the wet season (WS and dry season (DS were 7.0 and 8.6 oC, respectively. The lower value of LTD may cause the reduction of rice in WS (2.2 tons/ha as compared to that of DS (3.0 tons/ha. Rice yield has increased 50.5% and 33.8% in DS and WS, respectively, may due to the improvement of rice cultivation practices in Cambodia such as the better use of fertilizers, pest and weed control, and irrigation, and more effective rice cultivated protocol, as the increased trend of temperature may detrimentally affect rice yield. The breeding of heat and drought tolerance rice varieties and development of irrigation system are effective to reduce the negative influence from climate change to rice production in Cambodia.
CP violation in D{sup 0} {yields}(K{sup -}K{sup +},{pi}{sup -}{pi}{sup +}) from diquarks

Energy Technology Data Exchange (ETDEWEB)

Chen, Chuan-Hung [National Cheng Kung Univ., Tainan (China). Dept. of Physics; National Center for Theoretical Sciences, Hsinchu (China); Geng, Chao-Quiang [National Center for Theoretical Sciences, Hsinchu (China); National Tsing Hua Univ., Hsinchu (China). Dept. of Physics; Wang, Wei [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany)

2012-02-15

The explanation of the large CP asymmetries in D{sup 0}{yields}({pi}{sup +}{pi}{sup -},K{sup +}K{sup -}) decays observed by the LHCb collaboration is likely to call for new physics beyond the CKM paradigm. We explore new contributions caused by the color-sextet scalar diquark, and demonstrate that the diquark with the mass of order 1 TeV and nominal couplings with quarks can generate the CP asymmetries at the percent level. Using the experimental data on branching ratios and CP asymmetries of D{sup 0}{yields}({pi}{sup +}{pi}{sup -},K{sup +}K{sup -}), we derive the constraints on the diquark mass and couplings, which can be further examined on hadron colliders in the dijet final states. (orig.)
Progress on Footprint Reduction at the Hanford Site - 12406

Energy Technology Data Exchange (ETDEWEB)

McKenney, Dale E. [CH2M HILL, Plateau Remediation Company, Richland, Washington 99352 (United States); Seeley, Paul [Cenibark International, Inc., Richland, Washington 99352 (United States); Farabee, Al [U.S. Department of Energy, Richland Operations Office, Richland, Washington 99352 (United States)

2012-07-01

The Department of Energy (DOE) Office of Environmental Management (EM) continues to reduce the footprint of legacy sites throughout the EM complex. Footprint reduction is being accomplished by focusing cleanup activities on decontamination and demolition of excess contaminated facilities, soil and groundwater remediation, and solid waste disposition. All of these initiatives are being accomplished with established technologies in proven regulatory frameworks. Ultimately, completion of these environmental cleanup activities will reduce the monitoring and maintenance costs associated with managing large federal facilities, allowing EM to place more focus on other high priority cleanup efforts and facilitate a successful transition to land-term stewardship of these sites. Through the American Recovery and Reinvestment Act (ARRA) investment, the Department's cleanup footprint has been reduced by 45 percent to date, from 2411 km{sup 2} (931 mi{sup 2}) to 1336 km{sup 2} (516 mi{sup 2}s). With this significant progress on footprint reduction, the Department is on track towards their goal to reduce its overall footprint by approximately 90 percent by 2015. In addition, some areas cleaned up may become available for alternate uses (i.e. recreation, conservation, preservation, industrialization or development). Much of the work to reduce the complex's footprint occurred at the Savannah River Site in South Carolina and the Hanford Site in Washington, but cleanup continues across the complex. Footprint reduction is progressing well at the Hanford Site, supported predominantly through ARRA investment. To date, 994 km{sup 2} (384 mi{sup 2}) (65%) of footprint reduction have been achieved at Hanford, with a goal to achieve a 90% reduction by Fiscal Year 2015. The DOE EM and DOE Richland Operations Office, continue to make great progress to reduce the legacy footprint of the Hanford Site. Footprint reduction is being accomplished by focusing cleanup activities on
Measurement of the fission yields of selected prompt and decay fission product gamma-rays of spontaneously fissioning 252Cf and 244Cm

International Nuclear Information System (INIS)

Reber, E.L.; Gehrke, R.J.; Aryaeinejad, R.; Hartwell, J.K.

2005-01-01

Gamma-ray spectrometry measurements have been made of the fission yields of selected γ -rays emitted by the spontaneously fissioning isotopes 252 Cf and 244 Cm. The measured γ-rays were selected based on their relative abundance in the spectrum and their freedom from interference or, in a few instances, ease of interference correction. From these data and the cumulative and independent yield data of England and Rider, those γ-rays that are primarily produced by radioactive decay, as opposed to direct yield, were converted into the decays per spontaneous fission expressed in percent and compared to cumulative yield values of England and Rider. For those γ-rays whose production is dominated by direct (independent) yield, the ratio of γ-rays per spontaneous fission is reported. The γ-ray yield can be compared to the independent yield values of England and Rider when 100% of the direct feeding passes through the γ-ray. In those cases where both cumulative and independent yields contribute to the observed γ-ray emission rate, a direct comparison is not possible but a method to quantify the contribution from each is proposed. (author)
Study of extraterrestrial disposal of radioactive wastes. Part 3: Preliminary feasibility screening study of space disposal of the actinide radioactive wastes with 1 percent and 0.1 percent fission product contamination

Science.gov (United States)

Hyland, R. E.; Wohl, M. L.; Finnegan, P. M.

1973-01-01

A preliminary study was conducted of the feasibility of space disposal of the actinide class of radioactive waste material. This waste was assumed to contain 1 and 0.1 percent residual fission products, since it may not be feasible to completely separate the actinides. The actinides are a small fraction of the total waste but they remain radioactive much longer than the other wastes and must be isolated from human encounter for tens of thousands of years. Results indicate that space disposal is promising but more study is required, particularly in the area of safety. The minimum cost of space transportation would increase the consumer electric utility bill by the order of 1 percent for earth escape and 3 percent for solar escape. The waste package in this phase of the study was designed for normal operating conditions only; the design of next phase of the study will include provisions for accident safety. The number of shuttle launches per year required to dispose of all U.S. generated actinide waste with 0.1 percent residual fission products varies between 3 and 15 in 1985 and between 25 and 110 by 2000. The lower values assume earth escape (solar orbit) and the higher values are for escape from the solar system.
The Effect of Different Storage Temperatures on the Agronomic Characteristics and Yield of Two Varieties of Potatoes

Directory of Open Access Journals (Sweden)

A. H Jalali

2016-10-01

Full Text Available Introduction Potato (Solanum tuberosum ssp. is an autotetraploid (2n=4x=24 species and a key member of the Solanaceae family. Physiological age is usually be determined from potato tuber initiation and afterwards. Potato seed tubers physiological preparedness for growth is an important factor in determining the productive potential of the seed potatoes. Physiological age is considered as an internal biological clock that usually covers all aspects of the production while chronological age is determined only by the length of harvest and planting time (Gregory, 1985. In most cases, the current practice for storing potato tubers is to wound-heal seed-tubers at 10-15º C during the initial l0 days of storage (Curing and then reduce and maintain the temperature at a holding level of 4 ° C until planting while the technique of physiological aging of seed tubers, was not only one tuber storage temperature (4°C and then transferred to a higher temperature (similar natural germination conditions, but different thermal treatments during storage conditions is used in order to increase the physiological age. Some researchers argue that thermal storage is essential to obtain quantitative and qualitative performance which its value is higher than 250 GDD. The physiological age of seed tubers 900-600 GDD in some studies to increase performance by 90 percent and was associated uniformity producing tubers..In temperate regions with spring planting date, the short growing season and high summer temperature is considered as limiting factor for potato production. For this purpose the present study was carried out to evaluate the effect of different storage temperatures on the physiological age of seed and its effect on yield and earliness of two potato cultivars. Materials and Methods The Effects of six different thermal treatments storage in a three-month period, including two treatments of 440 degree- day (T1 and T2, two treatments of 880 degree-day (T3 and T4
Charge Yield at Low Electric Fields: Considerations for Bipolar Integrated Circuits

Science.gov (United States)

Johnston, A. H.; Swimm, R. T.; Thorbourn, D. O.

2013-01-01

A significant reduction in total dose damage is observed when bipolar integrated circuits are irradiated at low temperature. This can be partially explained by the Onsager theory of recombination, which predicts a strong temperature dependence for charge yield under low-field conditions. Reduced damage occurs for biased as well as unbiased devices because the weak fringing field in thick bipolar oxides only affects charge yield near the Si/SiO2 interface, a relatively small fraction of the total oxide thickness. Lowering the temperature of bipolar ICs - either continuously, or for time periods when they are exposed to high radiation levels - provides an additional degree of freedom to improve total dose performance of bipolar circuits, particularly in space applications.
Reversal of diastereofacial selectivity in hydride reductions of N-tert-butanesulfinyl imines.

Science.gov (United States)

Colyer, John T; Andersen, Neil G; Tedrow, Jason S; Soukup, Troy S; Faul, Margaret M

2006-09-01

A variety of N-tert-butanesulfinyl imines were reduced with NaBH4 in THF containing 2% water to provide the corresponding secondary sulfinamides in high yield and diastereoselectivity. By using the same sulfinyl imine starting materials and changing the reductant to L-Selectride, the stereoselectivity could be efficiently reversed to afford the opposite product diastereomer in high yield and selectivity.
Rate and Timing Effects of Growth Regulating Herbicides Applications on Grain Sorghum (Sorghum bicolor Growth and Yield

Directory of Open Access Journals (Sweden)

Thierry E. Besançon

2016-01-01

Full Text Available Dicamba and 2,4-D are among the most common and inexpensive herbicides used to control broadleaf weeds. However, different studies have pointed the risk of crop injury and grain sorghum yield reduction with postemergence applications of 2,4-D. No research data on grain sorghum response to 2,4-D or dicamba exists in the Southeastern United States. Consequently, a study was conducted to investigate crop growth and yield response to 2,4-D (100, 220, and 330 g acid equivalent ha−1 and dicamba (280 g acid equivalent ha−1 applied on 20 to 65 cm tall sorghum. Greater stunting resulted from 2,4-D applied at 330 g acid equivalent ha−1 or below 45 cm tall sorghum whereas lodging prevailed with 2,4-D at 330 g acid equivalent ha−1 and dicamba applied beyond 35 cm tall crop. Regardless of local environmental conditions, 2,4-D applied up to 35 cm tall did not negatively impact grain yield. There was a trend for yields to be somewhat lower when 2,4-D was applied on 45 or 55 cm tall sorghum whereas application on 65 cm tall sorghum systematically decreased yields. More caution should be taken with dicamba since yield reduction has been reported as early as applications made on 35 cm tall sorghum for a potentially dicamba sensitive cultivar.
Class Size Reduction in California: Summary of the 1998-99 Evaluation Findings.

Science.gov (United States)

Stecher, Brian M.; Bohrnstedt, George W.

This report discusses the results of the third year--1998-99--of California's Class Size Reduction (CSR) program. Assessments of the program show that CSR was almost fully implemented by 1998-99, with over 92 percent of students in K-3 in classes of 20 or fewer students. Those K-3 classes that had not been reduced in size were concentrated in…
Effects of genetic selection for milk yield on energy balance, levels of hormones, and metabolites in lactating cattle, and possible links to reduced fertility

NARCIS (Netherlands)

Veerkamp, R.F.; Beerda, B.; Lende, van der T.

2003-01-01

Selection for a higher milk yield increases metabolic load via a higher yield per se and/or via physiological processes that facilitate milk yield, and it is difficult to differentiate between these two. Here, we aim to identify important pathways that contribute to the reduction in fertility
Computer simulation of yielding supports under static and short-term dynamic load

Directory of Open Access Journals (Sweden)

Kumpyak Oleg

2018-01-01

Full Text Available Dynamic impacts that became frequent lately cause large human and economic losses, and their prevention methods are not always effective and reasonable. The given research aims at studying the way of enhancing explosion safety of building structures by means of yielding supports. The paper presents results of numerical studies of strength and deformation property of yielding supports in the shape of annular tubes under static and short-term dynamic loading. The degree of influence of yielding supports was assessed taking into account three peculiar stages of deformation: elastic; elasto-plastic; and elasto-plastic with hardening. The methodology for numerical studies performance was described using finite element analysis with program software Ansys Mechanical v17.2. It was established that rigidity of yielding supports influences significantly their stress-strain state. The research determined that with the increase in deformable elements rigidity dependence between load and deformation of the support in elastic and plastic stages have linear character. Significant reduction of the dynamic response and increase in deformation time of yielding supports were observed due to increasing the plastic component. Therefore, it allows assuming on possibility of their application as supporting units in RC beams.
Effect of Timing and Amount of Irrigation Water on Bean Yield and Water Use Efficiency in Arid and Semi-arid Conditions

Directory of Open Access Journals (Sweden)

S.S. Nurbakhsh

2016-02-01

consumption was affected by irrigation time. Among full irrigation treatments, irrigation at 2 p.m. and 6 a.m. had the highest and lowest water consumption, respectively. The total amount of water used in irrigation at 8 a.m., 2:00 p.m. and 6 p.m. compared to 6:00 a.m. was increased by1.6, 9.5 and 4.1 percent, respectively. The results showed that irrigation at 2:00 p.m., caused a significant reduction in yield. Moreover, water use efficiency in 6 a.m. treatments had increased 18.5 percent more than that of the 2:00 p.m. irrigation treatment. The time of irrigation did not have a meaningful effect on bush height, the number of minor branches, the pod's length. The effect of the amount of irrigation water was meaningful on bush height, number of minor branches, seeds yield, the number of pods in the bush, pods length and seed weight. Seed yield at 8:00 a.m., 2:00 p.m. and 6:00 p.m. treatments has shown 0.29, 17.1 and 7.6 percent decrease in comparison with 6:00 a.m. irrigation treatment, respectively. Moreover, 100-seed weights were significantly affected by the irrigation time. The maximum and minimum weights of 100-seed weights were obtained at 6:00 a.m. and 6:00 p.m. irrigation, respectively. Analysis of variance showed that the number of pods per plant was affected by irrigation time. The maximum number of pods per plant was 101 which belong to the 6:00 a.m. treatment. In this experiment in the case of irrigation at 2:00 p.m., the number of pods per plant was significantly decreased in full and deficit irrigation. The results showed that although the irrigation frequency was the same, irrigation at maximum evapo-transpiration caused the plant to be under stress and the yield was reduced. In other word, it can be said that time of irrigation had no meaningful effect on the appearance and shape of the plant while it was effective in terms of the yield. Overall assessments showed that maximum of the measured features were obtained in the case of 6:00 a.m. treatment
Effects of Vermi-compost Fertilizer Application and Foliar Spraying on Yield and Yield Component of Isabgol (Plantago ovate L. Medicinal Plant

Directory of Open Access Journals (Sweden)

Asghar Rahimi

2017-12-01

which were soaked in water for 24 hours under aerated condition using air pump. For preparation of tea compost, 500 g of vermi-compost, 25 cc humic acid, 5 g yeast, 25 cc seaweed extract, 25 cc sugar beet molasses were hanging in a fine lace fabric in 50-liter plastic water container for 24 hours while the air was flowing to container and the liquid extract separated as compost tea with fine lace fabric. Results and Discussion Analyze of variance showed that the effect of different levels of vermi-compost and foliar application on the spike number, mucilage yield and seed yield were significant but their interaction have no significant effect. Seed number, mucilage percent and SPAD number significantly affected by foliar application treatments but the vermi-compost treatments and their interactions had no significant effect on them. Also different levels of vermi-compost, foliar application and their interaction have significantly effect on leaf area and dry weight. Vermi-compost have available plant nutrient solution which increase leaf area indices compared with none use vermi-compost treatment. Arancon et al. (2004 reported that using 5 and 10 t.ha-1 vermi-compost significantly increased leaf area and shoot dry matter in strawberry. Conclusion The results of this research showed that the highest dry weight, spike number, harvest index, mucilage yield and seed yield observed in 16 t.ha-1 application of vermi-compost whit no significant difference related to 8 and 12 t.ha-1 vermi-compost. It is also resulted that foliar application of tea compost significantly affected SPAD, leaf area, shoot dry weight, spike number, seed and mucilage yield. Totally, it seems that using biological fertilizer (vermi-compost in amount of 8 t.ha-1 with foliar application of tea compost economically would be suitable for increasing seed yield and yield component of isabgol.
Reductions in Perceived Injustice are Associated With Reductions in Disability and Depressive Symptoms After Total Knee Arthroplasty.

Science.gov (United States)

Yakobov, Esther; Scott, Whitney; Stanish, William D; Tanzer, Michael; Dunbar, Michael; Richardson, Glen; Sullivan, Michael J L

2018-05-01

Perceptions of injustice have been associated with problematic recovery outcomes in individuals with a wide range of debilitating pain conditions. It has been suggested that, in patients with chronic pain, perceptions of injustice might arise in response to experiences characterized by illness-related pain severity, depressive symptoms, and disability. If symptoms severity and disability are important contributors to perceived injustice (PI), it follows that interventions that yield reductions in symptom severity and disability should also contribute to reductions in perceptions of injustice. The present study examined the relative contributions of postsurgical reductions in pain severity, depressive symptoms, and disability to the prediction of reductions in perceptions of injustice. The study sample consisted of 110 individuals (69 women and 41 men) with osteoarthritis of the knee scheduled for total knee arthroplasty (TKA). Patients completed measures of perceived injustice, depressive symptoms, pain, and disability at their presurgical evaluation, and at 1-year follow-up. The results revealed that reductions in depressive symptoms and disability, but not pain severity, were correlated with reductions in perceived injustice. Regression analyses revealed that reductions in disability and reductions in depressive symptoms contributed modest but significant unique variance to the prediction of postsurgical reductions in perceived injustice. The present findings are consistent with current conceptualizations of injustice appraisals that propose a central role for symptom severity and disability as determinants of perceptions of injustice in patients with persistent pain. The results suggest that the inclusion of psychosocial interventions that target depressive symptoms and perceived injustice might augment the impact of rehabilitation programs made available for individuals recovering from TKA.
Uranium tetrafluoride reduction closed bomb. Part I: Reduction process general conditions; Reduccion del tetrafluoruro de uranio en bomba cerrada. Part I. estudio de las variables generales del proceso de reduccion

Energy Technology Data Exchange (ETDEWEB)

Anca Abati, R; Lopez Rodriguez, M

1961-07-01

General conditions about the metallo thermic reduction in small bombs (250 and 800 gr. of uranium) has been investigated. Factors such as kind and granulometry of the magnesium used, magnesium excess and preheating temperature, which affect yields and metal quality have been considered. magnesium excess increased yields in a 15% in the small bomb, about the preheating temperature, there is a range between which yields and metal quality does not change. All tests have been made with graphite linings. (Author) 18 refs.
Modelling of the process yields of a whey fermentation

Energy Technology Data Exchange (ETDEWEB)

Blakebrough, N; Moresi, M

1981-01-01

The biomass yields (y) and COD reduction efficiencies (eta) of a whey fermentation by Kluyveromyces fragilis were studied in a 100-l fermenter at various stirrer speeds and lactose concentrations, and compared to those obtained in 10-l and 15-l fermenters at constant values of the oxygen transfer coefficient (kla) and air velocity. The empirical models previously constructed by using the 15-l fermenter data could be used to predict the yields on the other scales by calculating for each run the 15-l fermenter which would provide the same oxygen transfer coefficient measured by the sulfite method on each fermenter under study. To make this model independent of stirrer speeds used in each generic fermenter, the effect of aeration and mixing was incorporated into an overall parameter (kla) and the values of y and eta were correlated only with temperature, lactose level and kla, since these variables were approximately orthogonal. The validity of this model was finally checked against the yields reported by Wasserman et al. (1961) in a 6-cubic metre fermenter, thus confirming the capability of the model to provide a reliable basis for further scale-up on the production scale. (Refs. 17).
Effects of ambient and elevated level of ozone on Brassica campestris L. with special reference to yield and oil quality parameters.

Science.gov (United States)

Tripathi, Ruchika; Agrawal, S B

2012-11-01

Tropospheric ozone (O(3)) has become a serious threat to growth and yield of important agricultural crops over Asian regions including India. Effect of elevated O(3) (ambient+10ppb) was studied on Brassica campestris L. (cv. Sanjukta and Vardan) in open top chambers under natural field conditions. Eight hourly mean ambient O(3) concentration varied from 26.3ppb to 69.5ppb during the growth period. Plants under O(3) exposure showed reductions in photosynthetic rate, reproductive parameters, yield as well as seed and oil quality. Cultivar Sanjukta showed more reduction in photosynthetic characteristics, reproductive structures and seed and oil quality. However, total yield was more affected in Vardan. Exposure of O(3) increased the degree of unsaturation and level of PUFA, ω-6fatty acid, linolenic acid and erucic acid in oil indicating the deterioration of its quality. The study further confirmed that there is a correspondence between O(3) induced change in photosynthetic processes, reproductive development and yield and did not find any compensatory response in the final yield. Copyright © 2012 Elsevier Inc. All rights reserved.
Effects of Chemical and Organic Fertilizers on Growth, Yield and Yield Component of Tomato (Lycopersicon sculentum L.

Directory of Open Access Journals (Sweden)

R Mirzaei Talarposhti

2017-03-01

all of the treatments the total amount of applied nitrogen was equal (ca. 150 kg ha-1. Tomato seedlings were transplanted in experimental plots when the height of seedling reached to 15-20 cm. Total amount of tomato yield calculated at the end of growing season after four harvests. At the end of growing season by using five plants from each plot the dry weight of shoot, plant height, number of lateral branches and the number of fruits measured. Analysis of variance was performed using SAS and mean comparisons done by Duncan’s multiple range test (P ≤ 0.05. Results and Discussion Based on results effects of experimental treatments on shoot dry matter, plant height, number of lateral branches, number of flowers and fruits per plant and leaf area index (LAI was significant. Using all type of fertilizers comparing to control treatment resulted in increase shoot dry matter and the highest amount of shoot dry matter observed in VM and CF treatments. Different treatments have significant effect on plant height and highest amount of this trait observed in PM treatment. There was no significant difference between CM and control treatment for plant height and number of lateral branches but the highest number of lateral branches observed in MC treatment. The highest LAI (6.2 observed in VC and CF whereas the lowest LAI (3.3 was in control treatment. Effect of treatments on total yield also was significant and highest amounts of yield observed in CF (22.9 ton ha-1 and VC (20.8 ton ha-1 but the lowest was in control treatment (7.5 ton ha-1. Treatment effect on all of yield component except mean weight of fruit was significant and by using CF and VC the number of flower per plant comparing to control treatment increased 143 and 129 percent respectively. Conclusions Although in this experiment the highest amount of crop yield obtained in CF treatment, but by replacement of chemical fertilizer with vermicompost tomato yield decreased just about 10%, so it seems that by

Partial Reduction of Esters to Aldehydes Using a Novel Modified Red-Al Reducing Agent

Energy Technology Data Exchange (ETDEWEB)

Shin, Won Kyu; Kang, Daehoon; An, Duk Keun [Kangwon National Univ., Chunchon (Korea, Republic of)

2014-07-15

We have developed a convenient alternative method for the synthesis of aldehydes from both aromatic and aliphatic esters in very good to excellent yields in the absence of any additives using a modified Red-Al that was easily prepared by reacting commercially available Red-Al with cis-2,6-dimethyl morpholine. The advantages of the present methodology are as follows: simple preparation procedure of the reducing agent, improved product yields, convenient reaction temperature, and short reaction times. Therefore, the new reagent has great potential to be a useful alternative partial reducing agent for the synthesis of aldehydes from esters in organic synthesis. Aldehydes are valuable building blocks and reactive intermediates in organic synthesis. The general and classical syntheses of aldehydes from esters involve reduction-oxidation and partial reduction using efficient partial reducing agents. Obviously, one-step partial reduction methods are more useful than two-step reduction-oxidation methods owing to their simplicity, and generality in organic synthesis.
Photochemical reductions of benzil and benzoin in the presence of triethylamine and TiO{sub 2} photocatalyst

Energy Technology Data Exchange (ETDEWEB)

Park, Joon Woo; Kim, Eun Kyung [Ewha Womans Univ., Seoul (Korea, Republic of); Koh Park, Kwang Hee [Chungnam National Univ., Daejon (Korea, Republic of)

2002-09-01

This paper reports the photochemical reduction of benzil 1 to benzoin 2 and the reduction of 2 to hydrobenzoin 4 in deoxygenated solvents in the presence of triethylamine (TEA) and/or TiO{sub 2}. Without TEA or TiO{sub 2}, the photolysis of 1 resulted in very low yield of 2. The presence of TEA or TiO{sub 2} increased the rate of disappearance of 1 and the yield of 2, which were further increased considerably by the presence of water. The photoreduction of 1 to 2 proceeds through an electron transfer to 1 from TEA or hole-scavenged excited TiO{sub 2} followed by protonation. In the reaction medium of 88:7:2:3 CH{sub 3}CN/CH{sub 3}OH/H{sub 2}O/TEA with 2.5 mg/mL of TiO{sub 2}, the yield of 2 was as high as 85% at 50% conversion of 1. The photolysis of 2 in homogeneous media resulted in photo-cleavage to benzoyl and hydroxybenzyl radicals, which are mostly converted to benzaldehyde. The reduction product 4 is formed in low yield through the dimerization of hydroxybenzyl radicals. The addition of TEA increased the conversion rate of 2 and the yield of 4 significantly. This was attributed to the scavenging effect of TEA for benzoyl radical to produce N,N-diethylbenzamide and the photoreduction of benzaldehyde in the presence of TEA. The ratio of ({+-}) and meso isomers of 4 obtained from the photochemical reaction is about 1.1. This ratio is the same as that from the photochemical reduction of benzaldehyde in the presence of TEA. In the TiO{sub 2}-sensitized photochemical reduction of 2, meso-4 was obtained in moderate yield. The reduction of 2 to 4 proceeds through two consecutive electron/proton transfer processes on the surface of the photocatalyst without involvement of {alpha}-cleavage. The radical 11 initially formed from 2 by one electron/proton process can also combine with hydroxy methyl radical, which is generated after hole trapping of excited TiO{sub 2} by methanol, to product 1,2-diphenylpropenone after dehydration reaction.
The Effect of Sowing Date and Plant Density on Yield and Yield Components of Roselle (Hibiscus sabdariffa L. under Jiroft Climate Conditions

Directory of Open Access Journals (Sweden)

B Parsa Motlagh

2017-03-01

and biomass. After drying the plants were weighed in open air and the shade. In addition, properties of the height, the number of bolls per plant, the number of branches per plant, sepal dry weight per plant and seed weight per plant, randomly were picked and measured by the five plants of adjacent lines of each plot middle rows. Sepal and seed harvest index, was calculated from the sepal and seed yield proportion to total biomass, respectively. Results and Discussion The results indicated that sowing date and intra- rows of plants had a significant effect on most of the studied traits. Delayed sowing date reduced plant height, the number of branches, the number of bolls per plant, dry boll weight per plant, sepal yield, seed yield and biomass yield. Sepal harvest index and seed harvest index were not affected by sowing date treatment. By reducing the distance between the row increased height, sepal yield, seed yield, biomass yield and the number of branches per plant, the number of bolls per plant, dry boll weight per plant, seed weight per plant and seed harvest index was decreased. The intra-row had not a significant effect on sepal harvest index. Yield of the seed and sepal in 50cm row spacing showed increment than 75 and 100 cm row spacing about 9%, 19% and 16.5%, 50%, respectively. In this study, according to long-term growth of Roselle plant, it seems that in the distance between 50 cm plant row and with doubling plant density than a distance of 100 cm, has been provided less space and food material for plant. Therefore it causes intensifying the Inter- specific competition and the number of bolls per plant, boll weight, seed weight and sepal weight per plant decreased. But increasing the number of plants per area unit led to increased seed and sepal yield. Conclusions According to the obtained results of this study can be say that the delay in sowing date led to reduce the number of bolls, dry boll and sepal weight, as well as reduction of seed and sepal yield
Yield, yield components and dry matter digestibility of alfalfa experimental populations

Directory of Open Access Journals (Sweden)

Katić Slobodan

2010-01-01

Full Text Available Alfalfa is the most important forage crop grown in the temperate regions. It is cultivated for production of vegetative aerial mass used fresh or as hay, and recently as haylage and silage. In many centres worldwide, efforts are made to breed and create new alfalfa cultivars with both higher yields and of higher nutritional value. The aim of this paper was to determine yield and digestibility of 12 experimental populations of alfalfa, and to compare their results to the yields of well-known domestic alfalfa commercial cultivars. The results show significant differences in yield of green forage and dry matter among alfalfa populations, as well as in yield components, height, proportion of leaves in yield and growth rate (tab. 1, 2 and 3. Differences between in vitro digestible dry matter (% and yields of in vitro digestible dry matter (t ha-1 were also significant (tab. 5 and 6. Yield and quality of experimental populations were at the same level or higher than of control cultivars. Synthetic SINUSA exceeded the control cutivars (NS Mediana ZMS V and Banat VS in yield and quality of dry matter. .
An integrated, probabilistic model for improved seasonal forecasting of agricultural crop yield under environmental uncertainty

Directory of Open Access Journals (Sweden)

Nathaniel K. Newlands

2014-06-01

Full Text Available We present a novel forecasting method for generating agricultural crop yield forecasts at the seasonal and regional-scale, integrating agroclimate variables and remotely-sensed indices. The method devises a multivariate statistical model to compute bias and uncertainty in forecasted yield at the Census of Agricultural Region (CAR scale across the Canadian Prairies. The method uses robust variable-selection to select the best predictors within spatial subregions. Markov-Chain Monte Carlo (MCMC simulation and random forest-tree machine learning techniques are then integrated to generate sequential forecasts through the growing season. Cross-validation of the model was performed by hindcasting/backcasting it and comparing its forecasts against available historical data (1987-2011 for spring wheat (Triticum aestivum L.. The model was also validated for the 2012 growing season by comparing its forecast skill at the CAR, provincial and Canadian Prairie region scales against available statistical survey data. Mean percent departures between wheat yield forecasted were under-estimated by 1-4 % in mid-season and over-estimated by 1 % at the end of the growing season. This integrated methodology offers a consistent, generalizable approach for sequentially forecasting crop yield at the regional-scale. It provides a statistically robust, yet flexible way to concurrently adjust to data-rich and data-sparse situations, adaptively select different predictors of yield to changing levels of environmental uncertainty, and to update forecasts sequentially so as to incorporate new data as it becomes available. This integrated method also provides additional statistical support for assessing the accuracy and reliability of model-based crop yield forecasts in time and space.
Using artificial neural network and satellite data to predict rice yield in Bangladesh

Science.gov (United States)

Akhand, Kawsar; Nizamuddin, Mohammad; Roytman, Leonid; Kogan, Felix; Goldberg, Mitch

2015-09-01

Rice production in Bangladesh is a crucial part of the national economy and providing about 70 percent of an average citizen's total calorie intake. The demand for rice is constantly rising as the new populations are added in every year in Bangladesh. Due to the increase in population, the cultivation land decreases. In addition, Bangladesh is faced with production constraints such as drought, flooding, salinity, lack of irrigation facilities and lack of modern technology. To maintain self sufficiency in rice, Bangladesh will have to continue to expand rice production by increasing yield at a rate that is at least equal to the population growth until the demand of rice has stabilized. Accurate rice yield prediction is one of the most important challenges in managing supply and demand of rice as well as decision making processes. Artificial Neural Network (ANN) is used to construct a model to predict Aus rice yield in Bangladesh. Advanced Very High Resolution Radiometer (AVHRR)-based remote sensing satellite data vegetation health (VH) indices (Vegetation Condition Index (VCI) and Temperature Condition Index (TCI) are used as input variables and official statistics of Aus rice yield is used as target variable for ANN prediction model. The result obtained with ANN method is encouraging and the error of prediction is less than 10%. Therefore, prediction can play an important role in planning and storing of sufficient rice to face in any future uncertainty.
YIELD FORMING EFFECT OF APPLICATION OF COMPOSTS CONTAINING POLYMER MATERIALS ENRICHED IN BIOCOMPONENTS

Directory of Open Access Journals (Sweden)

Florian Gambuś

2014-01-01

Full Text Available In a pot experiment the impact of composts containing polymeric materials modified with biocomponents on the diversity of crops of oats and mustard was examined. The composts used in the study were produced in the laboratory from wheat and rape straw, and pea seed cleaning waste with 8-percent addition of chopped biopolymer materials (films which were prepared in the Central Mining Institute (GIG in Katowice. Three polymers differing in content of starch and density were selected for the composting. The pot experiment was conducted on three substrates: light and medium soil and on the sediment obtained after flotation of zinc and lead ores, coming from the landfill ZGH “Boleslaw” S.A. in Bukowno. The need for using such materials and substrates results from the conditions of processing some morphological fractions of municipal waste and from improving methods of reclamation. Yield enhancing effect of composts depends on the substrate on which the compost was used, cultivated plants and crop succession. Application of composts prepared with 8% of polymeric materials based on polyethylene, modified with starch as biocomponent, resulted in significantly lower yields in sandy (light soil in case of oats and, in some cases, in medium soil. Subsequent plant yield did not differ significantly between the objects fertilized with compost.
Plant yield and nitrogen content of a digitgrass in response to azospirillum inoculation

Energy Technology Data Exchange (ETDEWEB)

Schank, S.C.; Weier, K.L.; MacRae, I.C.

1981-02-01

Two Australian soils, a vertisol (pH 6.8, 0.299% N) and a sandy yellow podzol (pH 6.2, 0.042% N), were used with digitgrass, Digitaria sp. X46-2 (PI 421785), in a growth room experiment. Comparisons were made between plants inoculated with live and autoclaved bacterial suspensions of Australian and Brazilian isolates of Azospirillum brasilense. Seedlings were inoculated on days 10 and 35. Acetylene-reducing activity was measured five times during the experiment. Dry matter yields of the digitgrass on the podzol (low N) inoculated with liver bacteria were 23% higher than those of the controls. On the vertisol (high N), yield increases from inoculation with live bacteria were 8.5%. The higher-yielding plants had significantly lower precent nitrogen, but when total nitrogen of the tops was calculated, the inoculated plants had a higher total N than did the controls (P = 0.04). Acetylene-reducing activity was variable in the experiment, ranging from 0.5 to 11.9 mu mol of C2H2 core -1 day -1. Live bacterial treatment induced a proliferation of roots, possible earlier maturity, higher percent dry matter, and a higher total N in the tops. (Refs. 21).
Slope Controls Grain Yield and Climatic Yield in Mountainous Yunnan province, China

Science.gov (United States)

Duan, X.; Rong, L.; Gu, Z.; Feng, D.

2017-12-01

Mountainous regions are increasingly vulnerable to food insecurity because of limited arable land, growing population pressure, and climate change. Development of sustainable mountain agriculture will require an increased understanding of the effects of environmental factors on grain and climatic yields. The objective of this study was to explore the relationships between actual grain yield, climatic yield, and environmental factors in a mountainous region in China. We collected data on the average grain yield per unit area in 119 counties in Yunnan province from 1985 to 2012, and chose 17 environmental factors for the same period. Our results showed that actual grain yield ranged from 1.43 to 6.92 t·ha-1, and the climatic yield ranged from -0.15 to -0.01 t·ha-1. Lower climatic yield but higher grain yield was generally found in central areas and at lower slopes and elevations in the western and southwestern counties of Yunnan province. Higher climatic yield but lower grain yield were found in northwestern parts of Yunnan province on steep slopes. Annual precipation and temperature had a weak influence on the climatic yield. Slope explained 44.62 and 26.29% of the variation in grain yield and climatic yield. The effects of topography on grain and climatic yields were greater than climatic factors. Slope was the most important environmental variable for the variability in climatic and grain yields in the mountainous Yunnan province due to the highly heterogeneous topographic conditions. Conversion of slopes to terraces in areas with higher climatic yields is an effective way to maintain grain production in response to climate variability. Additionally, soil amendments and soil and water conservation measures should be considered to maintain soil fertility and aid in sustainable development in central areas, and in counties at lower slopes and elevations in western and southwestern Yunnan province.
Extreme Cost Reductions with Multi-Megawatt Centralized Inverter Systems

Energy Technology Data Exchange (ETDEWEB)

Schwabe, Ulrich [Alencon LLC; Fishman, Oleg [Alencon LLC

2015-03-20

The objective of this project was to fully develop, demonstrate, and commercialize a new type of utility scale PV system. Based on patented technology, this includes the development of a truly centralized inverter system with capacities up to 100MW, and a high voltage, distributed harvesting approach. This system promises to greatly impact both the energy yield from large scale PV systems by reducing losses and increasing yield from mismatched arrays, as well as reduce overall system costs through very cost effective conversion and BOS cost reductions enabled by higher voltage operation.
Large-volume reduction mammaplasty: the effect of body mass index on postoperative complications.

Science.gov (United States)

Gamboa-Bobadilla, G Mabel; Killingsworth, Christopher

2007-03-01

Eighty-six women underwent modified inferior pedicled reduction mammaplasty. All were grouped according to body mass index (BMI): 14 in the overweight group, 51 in the obese group, and 21 in the morbidly obese group. The mean ages were 34, 35, and 36, respectively, for the 3 groups and were not statistically different. The mean resection weight in the overweight group was 929 g, 1316 g for the obese group, and 1760 g for the morbidly obese group. Wound healing complications increased with BMI; the overweight, obese, and morbidly obese groups had 21%, 43%, and 71% of complications, respectively. The results were not statistically different. The rate of repeat operations increased proportionally with the BMI to 7%, 8%, and 19%, respectively. Postoperative BMI was measured in 30 patients. Fifty percent of this group had limited preoperative activity secondary to breast enlargement. The mean postoperative follow-up period was 43 months. Forty-seven percent of this group continued to have limited activity after breast reduction with a mean BMI of 37.8 kg/m2. The mean BMI of all women was 37.41 kg/m2 with a total BMI change of -0.4 kg/m2, suggesting that most women do not lose a significant amount of weight after breast reduction. There was no statistical difference in long-term BMI.
Biofuel manufacturing from woody biomass: effects of sieve size used in biomass size reduction.

Science.gov (United States)

Zhang, Meng; Song, Xiaoxu; Deines, T W; Pei, Z J; Wang, Donghai

2012-01-01

Size reduction is the first step for manufacturing biofuels from woody biomass. It is usually performed using milling machines and the particle size is controlled by the size of the sieve installed on a milling machine. There are reported studies about the effects of sieve size on energy consumption in milling of woody biomass. These studies show that energy consumption increased dramatically as sieve size became smaller. However, in these studies, the sugar yield (proportional to biofuel yield) in hydrolysis of the milled woody biomass was not measured. The lack of comprehensive studies about the effects of sieve size on energy consumption in biomass milling and sugar yield in hydrolysis process makes it difficult to decide which sieve size should be selected in order to minimize the energy consumption in size reduction and maximize the sugar yield in hydrolysis. The purpose of this paper is to fill this gap in the literature. In this paper, knife milling of poplar wood was conducted using sieves of three sizes (1, 2, and 4 mm). Results show that, as sieve size increased, energy consumption in knife milling decreased and sugar yield in hydrolysis increased in the tested range of particle sizes.
Yield trends and yield gap analysis of major crops in the world

NARCIS (Netherlands)

Hengsdijk, H.; Langeveld, J.W.A.

2009-01-01

This study aims to quantify the gap between current and potential yields of major crops in the world, and the production constraints that contribute to this yield gap. Using an expert-based evaluation of yield gaps and the literature, global and regional yields and yield trends of major crops are
A GUIDED SWAT MODEL APPLICATION ON SEDIMENT YIELD MODELING IN PANGANI RIVER BASIN: LESSONS LEARNT

Directory of Open Access Journals (Sweden)

Preksedis Marco Ndomba

2008-12-01

Full Text Available The overall objective of this paper is to report on the lessons learnt from applying Soil and Water Assessment Tool (SWAT in a well guided sediment yield modelling study. The study area is the upstream of Pangani River Basin (PRB, the Nyumba Ya Mungu (NYM reservoir catchment, located in the North Eastern part of Tanzania. It should be noted that, previous modeling exercises in the region applied SWAT with preassumption that inter-rill or sheet erosion was the dominant erosion type. In contrast, in this study SWAT model application was guided by results of analysis of high temporal resolution of sediment flow data and hydro-meteorological data. The runoff component of the SWAT model was calibrated from six-years (i.e. 1977–1982 of historical daily streamflow data. The sediment component of the model was calibrated using one-year (1977–1988 daily sediment loads estimated from one hydrological year sampling programme (between March and November, 2005 rating curve. A long-term period over 37 years (i.e. 1969–2005 simulation results of the SWAT model was validated to downstream NYM reservoir sediment accumulation information. The SWAT model captured 56 percent of the variance (CE and underestimated the observed daily sediment loads by 0.9 percent according to Total Mass Control (TMC performance indices during a normal wet hydrological year, i.e., between November 1, 1977 and October 31, 1978, as the calibration period. SWAT model predicted satisfactorily the long-term sediment catchment yield with a relative error of 2.6 percent. Also, the model has identified erosion sources spatially and has replicated some erosion processes as determined in other studies and field observations in the PRB. This result suggests that for catchments where sheet erosion is dominant SWAT model may substitute the sediment-rating curve. However, the SWAT model could not capture the dynamics of sediment load delivery in some seasons to the catchment outlet.
A GUIDED SWAT MODEL APPLICATION ON SEDIMENT YIELD MODELING IN PANGANI RIVER BASIN: LESSONS LEARNT

Directory of Open Access Journals (Sweden)

Preksedis M. Ndomba

2008-01-01

Full Text Available The overall objective of this paper is to report on the lessons learnt from applying Soil and Water Assessment Tool (SWAT in a well guided sediment yield modelling study. The study area is the upstream of Pangani River Basin (PRB, the Nyumba Ya Mungu (NYM reservoir catchment, located in the North Eastern part of Tanzania. It should be noted that, previous modeling exercises in the region applied SWAT with preassumption that inter-rill or sheet erosion was the dominant erosion type. In contrast, in this study SWAT model application was guided by results of analysis of high temporal resolution of sediment flow data and hydro-meteorological data. The runoff component of the SWAT model was calibrated from six-years (i.e. 1977¿1982 of historical daily streamflow data. The sediment component of the model was calibrated using one-year (1977-1988 daily sediment loads estimated from one hydrological year sampling programme (between March and November, 2005 rating curve. A long-term period over 37 years (i.e. 1969-2005 simulation results of the SWAT model was validated to downstream NYM reservoir sediment accumulation information. The SWAT model captured 56 percent of the variance (CE and underestimated the observed daily sediment loads by 0.9 percent according to Total Mass Control (TMC performance indices during a normal wet hydrological year, i.e., between November 1, 1977 and October 31, 1978, as the calibration period. SWAT model predicted satisfactorily the long-term sediment catchment yield with a relative error of 2.6 percent. Also, the model has identified erosion sources spatially and has replicated some erosion processes as determined in other studies and field observations in the PRB. This result suggests that for catchments where sheet erosion is dominant SWAT model may substitute the sediment-rating curve. However, the SWAT model could not capture the dynamics of sediment load delivery in some seasons to the catchment outlet.
EnviroAtlas - Cleveland, OH - Estimated Percent Tree Cover Along Walkable Roads

Data.gov (United States)

U.S. Environmental Protection Agency — This EnviroAtlas dataset estimates tree cover along walkable roads. The road width is estimated for each road and percent tree cover is calculated in a 8.5 meter...
EnviroAtlas - Austin, TX - Estimated Percent Tree Cover Along Walkable Roads

Data.gov (United States)

U.S. Environmental Protection Agency — This EnviroAtlas dataset estimates tree cover along walkable roads. The road width is estimated for each road and percent tree cover is calculated in a 8.5 meter...
EnviroAtlas - Portland, ME - Estimated Percent Tree Cover Along Walkable Roads

Data.gov (United States)

U.S. Environmental Protection Agency — This EnviroAtlas dataset estimates tree cover along walkable roads. The road width is estimated for each road and percent tree cover is calculated in a 8.5 meter...
EnviroAtlas - Woodbine, IA - Estimated Percent Tree Cover Along Walkable Roads

Data.gov (United States)

U.S. Environmental Protection Agency — This EnviroAtlas dataset estimates tree cover along walkable roads. The road width is estimated for each road and percent tree cover is calculated in a 8.5 meter...
EnviroAtlas - Milwaukee, WI - Estimated Percent Tree Cover Along Walkable Roads

Data.gov (United States)

U.S. Environmental Protection Agency — This EnviroAtlas dataset estimates tree cover along walkable roads. The road width is estimated for each road and percent tree cover is calculated in a 8.5 meter...

EnviroAtlas - Tampa, FL - Estimated Percent Tree Cover Along Walkable Roads

Data.gov (United States)

U.S. Environmental Protection Agency — This EnviroAtlas dataset estimates tree cover along walkable roads. The road width is estimated for each road and percent tree cover is calculated in a 8.5 meter...
EnviroAtlas - Pittsburgh, PA - Estimated Percent Tree Cover Along Walkable Roads

Data.gov (United States)

U.S. Environmental Protection Agency — This EnviroAtlas dataset estimates tree cover along walkable roads. The road width is estimated for each road and percent tree cover is calculated in a 8.5 meter...
EnviroAtlas - Phoenix, AZ - Estimated Percent Tree Cover Along Walkable Roads

Data.gov (United States)

U.S. Environmental Protection Agency — This EnviroAtlas dataset estimates tree cover along walkable roads. The road width is estimated for each road and percent tree cover is calculated in a 8.5 meter...
EnviroAtlas - Durham, NC - Estimated Percent Tree Cover Along Walkable Roads

Data.gov (United States)

U.S. Environmental Protection Agency — This EnviroAtlas dataset estimates tree cover along walkable roads. The road width is estimated for each road and percent tree cover is calculated in a 8.5 meter...
EnviroAtlas - Portland, OR - Estimated Percent Tree Cover Along Walkable Roads

Data.gov (United States)

U.S. Environmental Protection Agency — This EnviroAtlas dataset estimates tree cover along walkable roads. The road width is estimated for each road and percent tree cover is calculated in a 8.5 meter...
EnviroAtlas - Paterson, NJ - Estimated Percent Tree Cover Along Walkable Roads

Data.gov (United States)

U.S. Environmental Protection Agency — This EnviroAtlas dataset estimates tree cover along walkable roads. The road width is estimated for each road and percent tree cover is calculated in a 8.5 meter...
EnviroAtlas - Memphis, TN - Estimated Percent Tree Cover Along Walkable Roads

Data.gov (United States)

U.S. Environmental Protection Agency — This EnviroAtlas dataset estimates tree cover along walkable roads. The road width is estimated for each road and percent tree cover is calculated in a 8.5 meter...
EnviroAtlas - Fresno, CA - Estimated Percent Tree Cover Along Walkable Roads

Data.gov (United States)

U.S. Environmental Protection Agency — This EnviroAtlas dataset estimates tree cover along walkable roads. The road width is estimated for each road and percent tree cover is calculated in a 8.5 meter...
EnviroAtlas Estimated Percent Tree Cover Along Walkable Roads Web Service

Data.gov (United States)

U.S. Environmental Protection Agency — This EnviroAtlas dataset estimates tree cover along walkable roads. The road width is estimated for each road and percent tree cover is calculated in a 8.5 meter...
Amazing 7-day, super-simple, scripted guide to teaching or learning percents

CERN Document Server

Hernandez, Lisa

2014-01-01

Welcome to The Amazing 7-Day, Super-Simple, Scripted Guide to Teaching or Learning Percents. I have attempted to do just what the title says: make learning percents super simple. I have also attempted to make it fun and even ear-catching. The reason for this is not that I am a frustrated stand-up comic, but because in my fourteen years of teaching the subject, I have come to realize that my jokes, even the bad ones, have a crazy way of sticking in my students' heads. And should I use a joke (even a bad one) repetitively, the associations become embedded in their brains, many times to their cha
Physiological basis of barley yield under near optimal and stress conditions

Directory of Open Access Journals (Sweden)

Pržulj Novo

2004-01-01

Full Text Available Average barley yield fall below its potential due to incidence of stresses. Water stress is the main environmental factor limiting yield. The component a priori more sensitive to most stresses is the amount of radiation absorbed. The effect of stresses influence on the total amount of radiation absorbed by barley crop during its vegetation and the photosynthetic efficiency of radiation conversion. Growth inhibition is accompanied by reductions in leaf and cell wall extensibility. Grain yield under drought conditions is source limited. Supply of assimilates to the developing inflorescence plays a critical role in establishing final grain number and grain size. Grain weight is negatively affected by drought, high temperature, and any other factors that may reduce grain filling duration and grain filling rate. Awns and glaucousness confer better performance of barley under drought stress conditions. Barley responds with an increased accumulation of a number of proteins when subjected to different stress inducing cell dehydration. Screening techniques that are able to identify desirable genotypes based on the evaluation of physiological traits related to stress evasion and stress resistance maybe useful in breeding barley for resistance to stress, particularly drought stress. Crop management and breeding can reduce the incidence of stress on yield. The effect of these practices is sustained by an understanding of their physiology. In this paper the physiological basis of the processes determining barley yield and the incidence of stresses on photosynthetic metabolism that determine grain yield of barley is discussed. .
High Titer and Yields Achieved with Novel, Low-Severity Pretreatment Strategy

Energy Technology Data Exchange (ETDEWEB)

2016-03-01

NREL researchers obtained high concentration sugar syrups in enzymatic hydrolysis that are fermentable to ethanol and other advanced biofuels and intermediate products at high yields. The novel DMR process is simpler and bypasses all severe pretreatment methods, thus reducing the environmental impact. The results are unprecedented. Researchers achieved a high concentration of sugars (230g/L of monomeric sugar and 270 g/L total sugar) and this low toxicity, highly fermentable syrup yielded 86 g/L ethanol (> 90 percent conversion). In addition, the lignin streams from this process can readily be converted to jet or renewable diesel blendstocks through a hydrodeoxygenation step. The NREL-developed, low severity DMR process may potentially replace higher severity chemical pretreatments and associated expensive reactors constructed of exotic alloys with a simpler process, using commercial-scale equipment commonly associated with the pulp and paper industry, to produce high concentration, low toxicity sugar streams and highly reactive lignin streams from non-food renewable biomass for biological and catalytic upgrading to advanced biofuels and chemicals. The simpler DMR process with black liquor recycling could reduce environmental and life-cycle impacts, and repurpose shuttered pulp and paper mills to help revitalize rural economies.
Mixed Compound of DCPTA and CCC Increases Maize Yield by Improving Plant Morphology and Up-Regulating Photosynthetic Capacity and Antioxidants.

Directory of Open Access Journals (Sweden)

Yongchao Wang

Full Text Available DCPTA (2-diethylaminoethyl-3, 4-dichlorophenylether and CCC (2-chloroethyltrimethyl- ammonium chloride have a great effect on maize growth, but applying DCPTA individually can promote the increase of plant height, resulting in the rise of lodging percent. Plant height and lodging percent decrease in CCC-treated plants, but the accumulation of biomass reduce, resulting in yield decrease. Based on the former experiments, the performance of a mixture which contained 40 mg DCPTA and 20 mg CCC as active ingredients per liter of solution, called PCH was tested with applying 40mg/L DCPTA and 20mg/L CCC individually. Grain yield, yield components, internode characters, leaf area per plant, plant height and lodging percent as well as chlorophyll content, chlorophyll fluorescence, enzymatic antioxidants, membranous peroxide and organic osmolyte were analyzed in two years (2011 and 2012, using maize hybrid, Zhengdan 958 (ZD 958 at density of 6.75 plants m-2. CCC, DCPTA and PCH were sprayed on the whole plant leaves at 7 expanded leaves stage and water was used as control. Compared to control, PCH significantly increased grain yield (by 9.53% and 6.68% from 2011 to 2012. CCC significantly decreased kernel number per ear (by 6.78% and 5.69% and thousand kernel weight (TKW (by 8.57% and 6.55% from 2011 to 2012. Kernel number per ear and TKW increased in DCPTA-treated and PCH-treated plants, but showed no significant difference between them. In CCC-treated and PCH-treated plants, internode length and plant height decreased, internode diameter increased, resulting in the significant decline of lodging percent. With DCPTA application, internode diameter increased, but internode length and plant height increased at the same time, resulting in the augment of lodging percent. Bending strength and puncture strength were increased by applying different plant growth regulators (PGRs. In PCH-treated plants, bending strength and puncture strength were greater than other
Some Morphological Characters and Yield of Common Field Bean (Vicia faba.L

Directory of Open Access Journals (Sweden)

L Golchin

2014-05-01

Full Text Available To evalauate the influences of irrigation time with wastewater of Iran mayhes factory (producing leaven on some morphological characters and yield of faba bean, a factorial experiment carried out on the base of randomized complete block design (CRBD in Iran Mayehs factory farm in spring2012. Experimental factors consisted of irrigation times at 3 levels I1 = one irrigation with determined amount of wastewater, I2 = two irrigations with determined amount of wastewater, I3 = irrigation during the growth period of plants with determined amount of wastewater and wastewater concentration at 6 levels (P0 = irrigation with normal water (control, P15=15% wastewaters + normal water, P30= 30% wastewaters + normal, P45= 45% wastewaters + normal water, P60= 60% wastewaters + normal water, P100= all wastewater with three replications. Results showed that the effect irrigation numbers on traits such as plant height, number of pods per plant and seed yield was significant. Results also revealed that the effect of weastwater concentration on1000seed weight was significant. The interaction of number of irrigations by weastwater concentrations on stem dry weight was also signification. Evaluation of different treatments showed that 45 percent concentration of wastewater was increased traits under study. It seems, that controlled irrigation of bean with wastewater of factory (producing yeast can be effective in improving its yield in the region.
Reductive amination with zinc powder in aqueous media

Directory of Open Access Journals (Sweden)

Giovanni B. Giovenzana

2011-08-01

Full Text Available Zinc powder in aqueous alkaline media was employed to perform reductive amination of aldehydes with primary amines. The corresponding secondary amines were obtained in good yields along with minor amounts of hydrodimerization byproducts. The protocol is a green alternative to the use of complex hydrides in chlorinated or highly flammable solvents.
MFT homogeneity study at TNX: Final report on the low weight percent solids concentration

International Nuclear Information System (INIS)

Jenkins, W.J.

1993-01-01

A statistical design and analysis of both elemental analyses and weight percent solids analyses data was utilized to evaluate the MFT homogeneity at low heel levels and low agitator speed at both high and low solids feed concentrations. The homogeneity was also evaluated at both low and high agitator speed at the 6000+ gallons static level. The dynamic level portion of the test simulated feeding the Melter from the MFT to evaluate the uniformity of the solids slurry composition (Frit-PHA-Sludge) entering the melter from the MFT. This final report provides the results and conclusions from the second half of the study, the low weight percent solids concentration portion, as well as a comparison with the results from the first half of the study, the high weight percent solids portion
Analysis of Yield and Yield Related Traits Variability of Winter Wheat (Triticum aestivum L. Cv. Izolda and Double Haploid Lines

Directory of Open Access Journals (Sweden)

Kozdój Janusz

2015-12-01

Full Text Available The yield-forming potential of winter wheat is determined by several factors, namely total number of shoots per plant and total number of spikelets per spike. The field experiments were conducted during three vegetation seasons at the Plant Breeding and Acclimatization Institute – National Research Institute (PBAI–NRI, located in Radzików, Poland. The objective of this study was a comparative analysis of the structural yield-forming factor levels, which determine grain yield per spike and per plant of the DH lines and standard Izolda cultivar. Results indicate that several DH lines showed some differences in tested morphological structures of plant, yield factor levels and in grain yield per spike and per plant in comparison to standard Izolda, regardless of the year. Mean grain yield per plant of DH lines was 26.5% lower in comparison to standard Izolda only in the second year of study. It was caused by a reduction of productive tillers number. Structural yield-forming potential of DH lines was used in 38% and 59% and in case of Izolda in 47% and 61% (the second and the third year of experiment, respectively. The mean grain yield per spike of DH lines was 14.8% lower than Izolda cultivar only in third year of experiment and it was caused by about 12% lower number of grains per spike. Structural yield-forming potential of DH spikes was used in 82.4%, 85.4% and 84.9% and in case of Izolda in 83.8%, 87% and 89.5% (the first, the second and the third year of experiment, respectively. The grain yield per winter wheat plant (both DH lines and standard Izolda was significantly correlated with the number of productive tillers per plant (r = 0.80. The grain yield per winter wheat spike (both DH lines and Izolda cultivar was significantly and highly correlated with the number of grains per spike (r = 0.96, number of fertile spikelets per spike (r = 0.87 and the spike length (r = 0.80. Variation of spike and plant structural yield-forming factors
On yield gaps and yield gains in intercropping

NARCIS (Netherlands)

Gou, Fang; Yin, Wen; Hong, Yu; Werf, van der Wopke; Chai, Qiang; Heerink, Nico; Ittersum, van Martin K.

2017-01-01

Wheat-maize relay intercropping has been widely used by farmers in northwest China, and based on field experiments agronomists report it has a higher productivity than sole crops. However, the yields from farmers’ fields have not been investigated yet. Yield gap analysis provides a framework to
Evaluating Equating Results: Percent Relative Error for Chained Kernel Equating

Science.gov (United States)

Jiang, Yanlin; von Davier, Alina A.; Chen, Haiwen

2012-01-01

This article presents a method for evaluating equating results. Within the kernel equating framework, the percent relative error (PRE) for chained equipercentile equating was computed under the nonequivalent groups with anchor test (NEAT) design. The method was applied to two data sets to obtain the PRE, which can be used to measure equating…
Reduction of uterine prolapse in a sow by laparotomy.

Science.gov (United States)

Raleigh, P J

1977-01-29

In the past, total uterine prolapse in the sow has been regarded as a grave condition because manipulative reposition through the vulva and vagina is extremely difficult, if not impossible, and amputation is merely a salvage procedure with a mortality rate approaching 100 percent. Laparotomy as a means of facilitating reduction of the prolapse in the sow appears to have been overlooked although it is a standard procedure in dogs and cats. This report describes a case of uterine prolapse in a sow successfully treated by laparotomy.

Tradeoffs between water requirements and yield stability in annual vs. perennial crops

Science.gov (United States)

Vico, Giulia; Brunsell, Nathaniel A.

2018-02-01

Population growth and changes in climate and diets will likely further increase the pressure on agriculture and water resources globally. Currently, staple crops are obtained from annuals plants. A shift towards perennial crops may enhance many ecosystem services, but at the cost of higher water requirements and lower yields. It is still unclear when the advantages of perennial crops overcome their disadvantages and perennial crops are thus a sustainable solution. Here we combine a probabilistic description of the soil water balance and crop development with an extensive dataset of traits of congeneric annuals and perennials to identify the conditions for which perennial crops are more viable than annual ones with reference to yield, yield stability, and effective use of water. We show that the larger and more developed roots of perennial crops allow a better exploitation of soil water resources and a reduction of yield variability with respect to annual species, but their yields remain lower when considering grain crops. Furthermore, perennial crops have higher and more variable irrigation requirements and lower water productivity. These results are important to understand the potential consequences for yield, its stability, and water resource use of a shift from annual to perennial crops and, more generally, if perennial crops may be more resilient than annual crops in the face of climatic fluctuations.
Linkages among climate change, crop yields and Mexico-US cross-border migration.

Science.gov (United States)

Feng, Shuaizhang; Krueger, Alan B; Oppenheimer, Michael

2010-08-10

Climate change is expected to cause mass human migration, including immigration across international borders. This study quantitatively examines the linkages among variations in climate, agricultural yields, and people's migration responses by using an instrumental variables approach. Our method allows us to identify the relationship between crop yields and migration without explicitly controlling for all other confounding factors. Using state-level data from Mexico, we find a significant effect of climate-driven changes in crop yields on the rate of emigration to the United States. The estimated semielasticity of emigration with respect to crop yields is approximately -0.2, i.e., a 10% reduction in crop yields would lead an additional 2% of the population to emigrate. We then use the estimated semielasticity to explore the potential magnitude of future emigration. Depending on the warming scenarios used and adaptation levels assumed, with other factors held constant, by approximately the year 2080, climate change is estimated to induce 1.4 to 6.7 million adult Mexicans (or 2% to 10% of the current population aged 15-65 y) to emigrate as a result of declines in agricultural productivity alone. Although the results cannot be mechanically extrapolated to other areas and time periods, our findings are significant from a global perspective given that many regions, especially developing countries, are expected to experience significant declines in agricultural yields as a result of projected warming.
CRED Cumulative Map of Percent Scleractinian Coral Cover at Raita Bank, 2001

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This map displays optical validation observation locations and percent coverage of scleractinian coral overlaid on bathymetry.
CRED Cumulative Map of Percent Scleractinian Coral Cover at Eleven-Mile Bank

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This map displays optical validation observation locations and percent coverage of scleractinian coral overlaid on bathymetry.
CRED Cumulative Map of Percent Scleractinian Coral Cover at Gardner Pinnacles, 2003

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This map displays optical validation observation locations and percent coverage of scleractinian coral overlaid on bathymetry.
CRED Cumulative Map of Percent Scleractinian Coral Cover at French Frigate Shoals

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This map displays optical validation observation locations and percent coverage of scleractinian coral overlaid on bathymetry.
A Mixed Application of Geographically Weighted Regression and Unsupervised Classification for Analyzing Latex Yield Variability in Yunnan, China

Directory of Open Access Journals (Sweden)

Oh Seok Kim

2017-05-01

Full Text Available This paper introduces a mixed method approach for analyzing the determinants of natural latex yields and the associated spatial variations and identifying the most suitable regions for producing latex. Geographically Weighted Regressions (GWR and Iterative Self-Organizing Data Analysis Technique (ISODATA are jointly applied to the georeferenced data points collected from the rubber plantations in Xishuangbanna (in Yunnan province, south China and other remotely-sensed spatial data. According to the GWR models, Age of rubber tree, Percent of clay in soil, Elevation, Solar radiation, Population, Distance from road, Distance from stream, Precipitation, and Mean temperature turn out statistically significant, indicating that these are the major determinants shaping latex yields at the prefecture level. However, the signs and magnitudes of the parameter estimates at the aggregate level are different from those at the lower spatial level, and the differences are due to diverse reasons. The ISODATA classifies the landscape into three categories: high, medium, and low potential yields. The map reveals that Mengla County has the majority of land with high potential yield, while Jinghong City and Menghai County show lower potential yield. In short, the mixed method can offer a means of providing greater insights in the prediction of agricultural production.
Foliar copper uptake by maize plants: effects on growth and yield

Directory of Open Access Journals (Sweden)

Rogério Hidalgo Barbosa

2013-09-01

Full Text Available A slight increase in the levels of a certain nutrient can cause a significant increase in crop yield or can cause phytotoxicity symptoms. Thus, the aim of this study was to evaluate the effect of foliar application of copper (Cu on the growth and yield of DG-501 maize. The experiment was carried out between December 2009 and April 2010 in conventional tillage. When plants were with six to eight leaves, Cu (0, 100, 200, 300, 400, 500 and 600g ha-1 was applied to the leaves. Treatments were arranged in randomized complete block with five replications. When 50% of the plants were in flowering, it was evaluated the plant height, culm diameter, height of the first ear insertion, leaf area, and chlorophyll content. At harvest, it was evaluated diameter and length of the ear, yield and thousand grain weight. There was a linear reduction in the plant height and in the height of the first ear insertion with increasing Cu doses. On the other hand, chlorophyll content, leaf area, diameter and length of ear, thousand grain weight and yield increased at doses up to 100g ha-1 Cu, however, decreased at higher doses. Therefore, foliar Cu application at doses higher than 100g ha-1 has toxic effect in maize plants with losses in growth and yield.
Yield response of cotton, maize, soybean, sugar beet, sunflower and wheat to deficit irrigation

International Nuclear Information System (INIS)

Kirda, C.; Kanber, R.; Tulucu, K.

1995-01-01

Results of several field experiments on deficit irrigation programmes in Turkey are discussed. Deficit irrigation of sugar beet with water stress imposed (i e.,irrigation omitted)during ripening,stage saved nearly 22 % water, yet with no significant yield decrease. An experiment, conducted in Turkey Region, the European part of Turkey,and aimed at studying water production functions of sunflower(i e,yield vs water consumption), revealed that water stress imposed at either head forming or seed filling stags influence yield the least , and 40 % savings of irrigation water supply , compared with traditional practices in the region, can be achieved without significant yield reduction. Water stress imposed at vegetative and flowering stages of maize hindered the yield most significantly. The results showed that deficit irrigation can be a feasible option under limited supply of irrigation if stress occurs during yield formation stage. A four year field experiments aiming at developing deficit irrigation strategies for soybean showed that soybean was at the most sensitive to water stress during flowering and pod filling stages, and irrigation during these stages would ensure high yields. Results of experiments on cotton showed that irrigations omitted during yield formation stage did not significantly hinder the yield. Similarly wheat give good yield response if irrigated at booting,heading and milking stages, depending on w heather conditions. In areas where rainfall at planting is limited, supplementary irrigation during this period can ensure good establishment of wheat crop. 1 tab; 9 figs; 59 refs (Author)
Effect of Biological and Chemical Fertilizers on Oil, Seed Yield and some Agronomic Traits of Safflower under Different Irrigation Regimes

Directory of Open Access Journals (Sweden)

Hamidreza Fanaei

2017-08-01

Nitrokara application (100 g.ha-1 were sub plots. Bio-fertilizers mixed with seeds before planting based on manufacturer's recommendations. Fertilizers were applied at ratio of 123 kg.ha-1 potassium based on (K2O, of sulphatedipotash, 44 kg.ha-1 phosphor based on (P2O5 of super-phosphate triple respectively, (based on the results of above soil analysis along with one-third of 99 kg.ha-1 pure N based on Urea prior to sowing. Other two-third of N was applied at the start stem and heading stages respectively. All other agricultural practices (weeds control and irrigation, were performed when they were required and as recommended for commercial safflower production. A random sample of five plants was selected from each plot in physiological ripening to estimate the different parameters. Data were analyzed by using Mstat-C statistical package (Mstat-C, Version 1.41, Crop and Sciences Department, Michigan State University, USA. Duncan Multiple Range Test was used to do mean comparisons. Results and discussion Analysis of variance showed that the effect of irrigation and fertilizer resources on yield, yield components, oil yield and RWC were significant. Results showed that seed yield in treatment non stress with mean 1539 than stop irrigation in vegetative phase (rosset, stem elongation, heading, and stop irrigation in reproductive phase (flowering, and seed filling had increased 45 and 27 percent, respectively. High yield by increasing yield components under water supply reported by Behdani & Mosavifar, (2011. However there was no significant difference from aspect seed yield between biological fertilizers, but Nitrokara bio-fertilizer showed 19 percent increase than non-application - chemical fertilizer (control. Biofertilizer able during a biological process, chanced the nutrients from unusable to usable form for plants in soils. By increasing stress severity, leaf relative water content (RWC than (control irrigation in all growth stages decreased, so lowest RWC obversed when
Fast and inexpensive synthesis of pentacene with high yield using 6,13-pentacenequinone as precursor

Science.gov (United States)

Mota, María L.; Rodriguez, Bibiana; Carrillo, Amanda; Ambrosio, Roberto C.; Luque, Priscy A.; Mireles, Marcela; Vivaldo, Israel; Quevedo, Manuel A.

2018-02-01

Pentacene is an important semiconductor in the field of organic electronics. In this work is presented an alternative synthesis procedure to obtain pentacene from 6,13-pentacenequinone as a precursor. Synthesis of pentacene was performed in two reactions, Diels-Adler cycloaddition of 6,13-pentacenequinone followed by 6,13-pentacenequinone reduction to pentacene, employing LiAlH4 as reducing agent. The products were characterized by Fourier Transform Infrared Spectroscopy (FTIR), 1H-Nuclear Magnetic Resonance Spectroscopy (1H-NMR), X-Ray Diffraction (XRD), Thermogravimetric Analysis (TGA) and Ultraviolet-Visible Spectroscopy (UV-VIS). In this work, 6,13-pentacenequinone was synthetized with a high yield (55%) using an alternative method. The optimization process resulted in an overall reduction of reaction time while exhibiting high yield. The method presented here provides an affordable pentacene synthesis route with high purity, which can be further applied for research and development of organic electronic applications.
Low Carbon Rice Farming Practices in the Mekong Delta Yield Significantly Higher Profits and Lower Greenhouse Gas Emissions

Science.gov (United States)

Rudek, J.; Van Sanh, N.; Tinh, T. K.; Tin, H. Q.; Thu Ha, T.; Pha, D. N.; Cui, T. Q.; Tin, N. H.; Son, N. N.; Thanh, H. H.; Kien, H. T.; Kritee, K.; Ahuja, R.

2014-12-01

The Vietnam Low-Carbon Rice Project (VLCRP) seeks to significantly reduce GHG emissions from rice cultivation, an activity responsible for more than 30% of Vietnam's overall GHG emissions, while improving livelihoods for the rice farmer community by decreasing costs and enhancing yield as well as providing supplemental farmer income through the sale of carbon credits. The Mekong Delta makes up 12% of Vietnam's land area, but produces more than 50% of the country's rice, including more than 90% of the rice for export. Rice cultivation is the main source of income for 80% of farmers in the Mekong Delta. VLCRP was launched in late 2012 in the Mekong Delta in two major rice production provinces, Kien Giang and An Giang. To date, VLCRP has completed 11 crop seasons (in Kien Giang and An Giang combined), training over 400 farmer households in applying VLCRP's package of practices (known as 1 Must - 6 Reductions) and building technical capacity to its key stakeholders and rice farmer community leaders. By adopting the 1 Must- 6 Reductions practices (including reduced seeding density, reduced fertilizer and pesticide application, and alternative wetting and drying water management), rice farmers reduce their input costs while maintaining or improving yields, and decreasing greenhouse gas emissions. The VLCRP package of practices also deliver other environmental and social co-benefits, such as reduced water pollution, improved habitat for fishery resources and reduced health risks for farmers through the reduction of agri-chemicals. VLCRP farmers use significantly less inputs (50% reduction in seed, 30% reduction in fertilizer, 40-50% reduction in water) while improving yields 5-10%, leading to an increase in profit from 10% to as high as 60% per hectare. Preliminary results indicate that the 1 Must- 6 Reductions practices have led to approximately 40-65% reductions in greenhouse gas emissions, equivalent to 4 tons of CO2e/ha/yr in An Giang and 35 tons of CO2e/ha/yr in Kien
Traits in Spring Wheat Cultivars Associated with Yield Loss Caused by a Heat Stress Episode after Anthesis

DEFF Research Database (Denmark)

Vignjevic, Marija; Wang, Xiao; Olesen, Jørgen E

2015-01-01

with heat tolerance. Fifteen spring wheat (Triticum aestivum L.) cultivars were grown in pots under semifield conditions, and heat stress (35/26 °C) and control treatments (20/12 °C) were applied in growth chambers for 5 days starting 14 days after flowering. The heat stress treatment reduced final yield...... in the grain-filling period was negatively correlated with grain nitrogen yield (r = −0.60). A positive correlation (r = 0.73) was found between the treatment effect on green leaf area (GLA) and the reduction in yield resulting from heat stress. The amount of stem water-soluble carbohydrates (WSC...
The Effect of Tariff Reduction in Agricultural Sector on Macroeconomic Variables: Using Global Trade Analysis Project (GTAP

Directory of Open Access Journals (Sweden)

H. Heidari

2016-03-01

model includes 3 regions: Iran, ECO and CIS countries as commercial partners of Iran, and the rest of the world, 5 production factors: land, skilled labor, unskilled labor, capital, and natural resources, and finally, 3 production sectors: agriculture, industry, and services. Two scenarios are simulated in this study: first, 50 percent imports value tariff reduction, and zero import tax target rate on intermediate goods for agriculture production in Iran is been considering. For the second scenario, we set a zero target rate for all cases mentioned above. It should be noted that according to Social Accounting Matrix gathered for Iran currently, the average tariff rate on imports of agricultural products from selected commercial partners is 27.67 percent and 7.82 percent from Iran to these countries. Results and Discussion: Results showed that 50 percent reduction in tariffs, increases social welfare, while full elimination of agricultural tariffs leads to a loss in welfare. The welfare analysis illustrated that the efficiency of resource allocation in agriculture sector increased in the first scenario, while in the second scenario, the share of efficient allocation of resources in welfare was negative. Despite equal reduction in tariff rate on the value of imports from these countries to Iran and vice versa, trade balance of Iran has been worse, while it was beneficial for trade balance of her commercial partners. However, agricultural sector had positive share in trade balance of Iran, but the negative effect of industrial sector on trade balance, totally, reduced trade balance of Iran in large quantities. The first scenario increased agricultural production, but increased production was lower in the second scenario..However, the industrial sector production was slightly reduced. On the other hand, more production in agriculture lead more production factors demand, such as skilled and unskilled labors, and capital using in this sector. Moreover, price of production
Ni-Catalyzed Carbon-Carbon Bond-Forming Reductive Amination.

Science.gov (United States)

Heinz, Christoph; Lutz, J Patrick; Simmons, Eric M; Miller, Michael M; Ewing, William R; Doyle, Abigail G

2018-02-14

This report describes a three-component, Ni-catalyzed reductive coupling that enables the convergent synthesis of tertiary benzhydryl amines, which are challenging to access by traditional reductive amination methodologies. The reaction makes use of iminium ions generated in situ from the condensation of secondary N-trimethylsilyl amines with benzaldehydes, and these species undergo reaction with several distinct classes of organic electrophiles. The synthetic value of this process is demonstrated by a single-step synthesis of antimigraine drug flunarizine (Sibelium) and high yielding derivatization of paroxetine (Paxil) and metoprolol (Lopressor). Mechanistic investigations support a sequential oxidative addition mechanism rather than a pathway proceeding via α-amino radical formation. Accordingly, application of catalytic conditions to an intramolecular reductive coupling is demonstrated for the synthesis of endo- and exocyclic benzhydryl amines.
Do Voluntary Pollution Reduction Programs (VPRs) Spur Innovation in Environmental Technology

OpenAIRE

Carrion-Flores, Carmen E.; Innes, Robert; Sam, Abdoul G.

2006-01-01

In the context of the EPA's 33/50 program, we study whether a VPR can prompt firms to develop new environmental technologies that yield future emission reduction benefits. Because pollutant reductions generally require costly reformulations of products and/or production processes, environmental over-compliance induced by a VPR may potentially spur environmental innovation that can reduce these costs. Conversely, a VPR may induce a participating firm to divert resources from environmental rese...
Asymmetric Reduction of tert-Butanesulfinyl Ketimines by N-Heterocyclic Carbene Boranes.

Science.gov (United States)

Liu, Tao; Chen, Ling-yan; Sun, Zhihua

2015-11-20

N-heterocyclic carbene borane (NHC-borane) based on a triazole core is demonstrated for the first time to be efficient for reduction of a variety of tert-butanesulfinyl ketimines. Up to 95% yield and up to >99% diastereomeric excess were achieved. NHC-borane exhibited excellent activities that are more efficient than or comparable to commonly used reductive reagents such as NaBH4, NaBH3CN, l-selectride, Ru catalyst, or BH3-THF.
Non-Hardware ("Soft") Cost-Reduction Roadmap for Residential and Small Commercial Solar Photovoltaics, 2013-2020

Energy Technology Data Exchange (ETDEWEB)

Ardani, K.; Seif, D.; Margolis, R.; Morris, J.; Davidson, C.; Truitt, S.; Torbert, R.

2013-08-01

The objective of this analysis is to roadmap the cost reductions and innovations necessary to achieve the U.S. Department of Energy (DOE) SunShot Initiative's total soft-cost targets by 2020. The roadmap focuses on advances in four soft-cost areas: (1) customer acquisition; (2) permitting, inspection, and interconnection (PII); (3) installation labor; and (4) financing. Financing cost reductions are in terms of the weighted average cost of capital (WACC) for financing PV system installations, with real-percent targets of 3.0% (residential) and 3.4% (commercial).
Energy impacts of heat island reduction strategies in the Greater Toronto Area, Canada; FINAL

International Nuclear Information System (INIS)

Konopacki, Steven; Akbari, Hashem

2001-01-01

In 2000, the Toronto Atmospheric Fund (TAF) embarked on an initiative to quantify the potential benefits of Heat Island Reduction (HIR) strategies (shade trees, reflective roofs and pavements) in reducing cooling energy use in buildings, lowering the ambient air temperature and improve air quality. This report summarizes the efforts of Lawrence Berkeley National Laboratory (LBNL) to assess the impacts of HIR measures on building cooling- and heating-energy use. We discuss our efforts to calculate annual energy savings and peak-power avoidance of HIR strategies in the building sector of the Greater Toronto Area. The analysis is focused on three major building types that offer most saving potentials: residence, office and retail store. Using an hourly building energy simulation model, we quantify the energy saving potentials of (1) using cool roofs on individual buildings[direct effect], (2) planting deciduous shade trees near south and west walls of building[direct effect], (3) planting coniferous wind-shielding vegetation near building[direct effect], (4) ambient cooling by a large-scale program of urban reforestation with reflective building roofs and pavements[indirect effect], (5) and the combined direct and indirect effects. Results show potential annual energy savings of over$11M (with uniform residential and commercial electricity and gas prices of$0.084/kWh and$5.54/GJ) could be realized by ratepayers from the combined direct and indirect effects of HIR strategies. Of that total, about 88 percent was from the direct impact roughly divided equally among reflective roofs, shade trees and wind-shielding, and the remainder (12 percent) from the indirect impact of the cooler ambient air temperature. The residential sector accounts for over half (59 percent) of the total, offices 13 percent and retail stores 28 percent. Savings from cool roofs were about 20 percent, shade trees 30 percent, wind shielding of tree 37 percent, and indirect effect 12 percent. These
Using NOAA/AVHRR based remote sensing data and PCR method for estimation of Aus rice yield in Bangladesh

Science.gov (United States)

Nizamuddin, Mohammad; Akhand, Kawsar; Roytman, Leonid; Kogan, Felix; Goldberg, Mitch

2015-06-01

Rice is a dominant food crop of Bangladesh accounting about 75 percent of agricultural land use for rice cultivation and currently Bangladesh is the world's fourth largest rice producing country. Rice provides about two-third of total calorie supply and about one-half of the agricultural GDP and one-sixth of the national income in Bangladesh. Aus is one of the main rice varieties in Bangladesh. Crop production, especially rice, the main food staple, is the most susceptible to climate change and variability. Any change in climate will, thus, increase uncertainty regarding rice production as climate is major cause year-to-year variability in rice productivity. This paper shows the application of remote sensing data for estimating Aus rice yield in Bangladesh using official statistics of rice yield with real time acquired satellite data from Advanced Very High Resolution Radiometer (AVHRR) sensor and Principal Component Regression (PCR) method was used to construct a model. The simulated result was compared with official agricultural statistics showing that the error of estimation of Aus rice yield was less than 10%. Remote sensing, therefore, is a valuable tool for estimating crop yields well in advance of harvest, and at a low cost.

Effects of Intercropping on Biological Yield, Percentage of Nitrogen and Morphological Characteristics of Coriander and Fenugreek

Directory of Open Access Journals (Sweden)

R. Bigonah

2014-12-01

Full Text Available In order to study the intercropping arrangements of coriander (Coriandrum sativum L. and fenugreek (Trigonella foenum-graecum L., a field experiment was conducted during growing season of 2010 at Agriculture Research Station, College of Agriculture, Ferdowsi University of Mashhad, Iran. A randomized complete block design with three replications was used. Treatments included: mono-crop of fenugreek (A, %25 of optimum density of coriander + %175 of optimum density of fenugreek (B, %50 of optimum density of coriander + %150 of optimum density of fenugreek (C, %75 of optimum density of coriander + %125 of optimum density of fenugreek (D, %100 of optimum density of coriander + %100 of optimum density of fenugreek (E, mono-crop of coriander (F, %125 of optimum density of coriander + %75 of optimum density of fenugreek (G, %150 of optimum density of coriander + %50 of optimum density of fenugreek (H, %175 of optimum density of coriander + %25 of optimum density of fenugreek (I. Biological yield harvested in coriander at %5 flowering stage and in fenugreek at %20 flowering stage. The result showed that B treatment had highest plant height and biological yield of fenugreek, highest total land equivalent ratio and also B treatment had lowest essential oil contents of leaf, essential oil yield and biological yield of coriander. I treatment had lowest biological yield of fenugreek and it had highest essential oil contents of leaf, essential oil yield and plant height in coriander. Also A and E treatments had highest percent of nitrogen of biomass in fenugreek and coriander, respectively.
S O{sub 2} emission reduction through the use of the humid oxidation process

Energy Technology Data Exchange (ETDEWEB)

Fink, Jurgen [TIBRAS, Titanio do Brasil S.A., Salvador, BA (Brazil)

1994-12-31

The SO{sub 2} emission reduction unit to be installed in TIBRAS consists of six reactors supplied with activates carbon beds which will remove the SO{sub 2} (0.11 volume percent) contained in the residual gas (150.000 cubic meters per hour) produced in three rotary calciner kilns. The SO{sub 2} reacts with the water in the carbon pores forming diluted sulfuric acid. The activated carbon is fabricated from coke from peat. The weak H{sub 2} SO{sub 4} is reused in the titanium dioxide pigment process. This process is supposed to reduce TIBRAS SO{sub 2} emissions by 50 to 85 percent in addition to eliminating two stacks. 2 figs., 5 tabs.
S O{sub 2} emission reduction through the use of the humid oxidation process

Energy Technology Data Exchange (ETDEWEB)

Fink, Jurgen [TIBRAS, Titanio do Brasil S.A., Salvador, BA (Brazil)

1993-12-31

The SO{sub 2} emission reduction unit to be installed in TIBRAS consists of six reactors supplied with activates carbon beds which will remove the SO{sub 2} (0.11 volume percent) contained in the residual gas (150.000 cubic meters per hour) produced in three rotary calciner kilns. The SO{sub 2} reacts with the water in the carbon pores forming diluted sulfuric acid. The activated carbon is fabricated from coke from peat. The weak H{sub 2} SO{sub 4} is reused in the titanium dioxide pigment process. This process is supposed to reduce TIBRAS SO{sub 2} emissions by 50 to 85 percent in addition to eliminating two stacks. 2 figs., 5 tabs.
Matter power spectrum and the challenge of percent accuracy

OpenAIRE

Schneider, Aurel; Teyssier, Romain; Potter, Doug; Stadel, Joachim; Onions, Julian; Reed, Darren S.; Smith, Robert E.; Springel, Volker; Pearce, Frazer R.; Scoccimarro, Roman

2015-01-01

Future galaxy surveys require one percent precision in the theoretical knowledge of the power spectrum over a large range including very nonlinear scales. While this level of accuracy is easily obtained in the linear regime with perturbation theory, it represents a serious challenge for small scales where numerical simulations are required. In this paper we quantify the precision of present-day $N$-body methods, identifying main potential error sources from the set-up of initial conditions to...
Reduction of 2-chloro-N-phenylpropanamide and 2-methyl-N-phenylaziridine with lithium aluminium hydride

DEFF Research Database (Denmark)

Vilhelmsen, Mie Højer; Østergaard, Lars Frøsig; Nielsen, Mogens Brøndsted

2008-01-01

in the reduction and can be isolated from reactions with less LiAlH4. Reduction of 2-methyl-N-phenylaziridine itself proceeds non-regioselectively to provide a mixture of propyl- and isopropylanilines. Formation of the amines by reduction of the aziridine is much slower than formation by reduction of the 2......-chloropropanamide, which indicates that Lewis acid catalysis (by aluminium chlorohydrides) facilitates the reduction of the aziridine. In addition, Lewis acid catalysis increases the relative yield of the propylamine product. The reduction of 2-chloro-N-phenylpropanamide furnishes 2-phenylamino-1-propanol as a by...
Modelling of the process yields of a whey fermentation

Energy Technology Data Exchange (ETDEWEB)

Blakebrough, N; Moresi, M

1981-09-01

The biomass yields (y) and COD reduction efficiencies (eta) of a whey fermentation by Kluyveromyces fragilis were studied in a 100-l fermenter at various stirrer speeds and lactose concentrations, and compared to those obtained in 10-l and 15-l fermenters at constant values of the oxygen transfer coefficient (ksub(L)a) and air velocity. The empirical models previously constructed by using the 15-l fermenter data could be used to predict the yields on the other scales by calculating for each run the 15-l fermenter which would provide the same oxygen transfer coefficient measured by the sulphite method on each fermenter under study. To make this model independent of stirrer speeds used in each generic fermenter, the effect of aeration and mixing was incorporated into an overall parameter (ksub(L)a) and the values of y and eta were correlated only with temperature, lactose level and ksub(L)a since these variables were approximately orthogonal.
Effect of Plant Density and Weed Interference on Yield and Yied Components of Grain Sorghum

Directory of Open Access Journals (Sweden)

S. Sarani

2018-01-01

all measured traits except seed yield were significantly affected by plant density. Although the increase in plant density from 10 to 30 plants m-2 significantly decreased panicle number per plant, number of seed per panicle and 1000-seed weight by 45.5, 16.2 and 12.3%, respectively but significantly increased number of panicle per m2 by 54.3%. This subject caused seed yield did not show significant changes as plant density per area unit was changed. Also, means comparison showed that increase in density from 10 to 30 plants m-2 had positive significant effect on biological yield so that its increased by 56.7%. Interference treatment had significant effect on all measured traits except number of panicle per plant. Traits of 1000-seed weight, seed yield and biological yield decreased considerably by extending of weeds interference period and the highest seed yield with 350.04.37 g. m-2 achieved in treatment of weed free until end of growth season which were 18.9, 47.6 and 73 percent more than interference until 6-8 leaf stage, interference until stage of panicle emergence, interference until end of growth season, respectively. Also, weed interference until the end of growing season of sorghum reduced biological yield by 59.9 percent compared to treatment of weed free until end of growth season. The highest weed density with 182 plants per m2 was observed in interference until 6-8 leaf stage and weed density per unit area reduced by increase in interference period. Despite the declining in weed density, weeds dry weight per m2 was increased by increasing interference period until the end of growth season. On other word, weeds were in early development, with high density and low dry mass accumulation, which are desirable from a technical point of view for weed control. Conclusions This research showed that increase in plant density non significantly increased on seed yield but change of density from 10 to 30 plants m-2 had positive significant effect on biological yield
Assessing water quality of the Chesapeake Bay by the impact of sea level rise and warming

Science.gov (United States)

Wang, P.; Linker, L.; Wang, H.; Bhatt, G.; Yactayo, G.; Hinson, K.; Tian, R.

2017-08-01

The influence of sea level rise and warming on circulation and water quality of the Chesapeake Bay under projected climate conditions in 2050 were estimated by computer simulation. Four estuarine circulation scenarios in the estuary were run using the same watershed load in 1991-2000 period. They are, 1) the Base Scenario, which represents the current climate condition, 2) a Sea Level Rise Scenario, 3) a Warming Scenario, and 4) a combined Sea Level Rise and Warming Scenario. With a 1.6-1.9°C increase in monthly air temperatures in the Warming Scenario, water temperature in the Bay is estimated to increase by 0.8-1°C. Summer average anoxic volume is estimated to increase 1.4 percent compared to the Base Scenario, because of an increase in algal blooms in the spring and summer, promotion of oxygen consumptive processes, and an increase of stratification. However, a 0.5-meter Sea Level Rise Scenario results in a 12 percent reduction of anoxic volume. This is mainly due to increased estuarine circulation that promotes oxygen-rich sea water intrusion in lower layers. The combined Sea Level Rise and Warming Scenario results in a 10.8 percent reduction of anoxic volume. Global warming increases precipitation and consequently increases nutrient loads from the watershed by approximately 5-7 percent. A scenario that used a 10 percent increase in watershed loads and current estuarine circulation patterns yielded a 19 percent increase in summer anoxic volume, while a scenario that used a 10 percent increase in watershed loads and modified estuarine circulation patterns by the aforementioned sea level rise and warming yielded a 6 percent increase in summer anoxic volume. Impacts on phytoplankton, sediments, and water clarity were also analysed.
Mutagenic effect of gamma-rays on improvement of yield attributing traits of greengram (Vigna radiata (L.) Wilczek)

International Nuclear Information System (INIS)

Das, T.R.; Baisakh, B.

2014-01-01

Seed samples of two morphologically distinct varieties (Sujata and OBGG-52) of greengram were treated with three doses of Gamma-rays (200 Gy, 400 Gy and 600 Gy). Mutagenic treatments in general showed reduction in mean values of germination, survival and plant growth traits in comparison to control in M 1 generation and the magnitude of reduction was directly related to the dose of the mutagens. The spectrum of chlorophyll mutations includes albina, xantha, chlorina, striata and viridis in both the varieties. The varied morphological mutations observed in leaf of both the genotypes were tricotyledonary, quadrifoliate, pentafoliate and lobed leaf. Early flowering, late flowering, tall plant, trailing type, profused poded, bold poded and sterile plant were also observed as an effect of mutagen in both the genotypes. The M 2 populations showed wider range of variations than the parent varieties. Magnitude of changes varied with mutagen dose and the varieties. Higher the dose of treatment, greater the shift in the mean and variance of different yield parameters. Genetic advance estimates showed that selection in M 2 populations would be effective in improving the yield/plant. Following selection among M 2 plants and M 3 progenies on the basis of higher yield, high yielding mutant cultures in both varieties were isolated in M 4 and evaluated in M 5 generation. Gamma-ray dose of 200 Gy was most effective for improving the yield traits in both the genotypes as it brought out improvement in pods/plant, pod length and 100-seed wt. where as 400 Gy improved 100- seed wt. in only Sujata and 600 Gy improved pod length and seeds/pod only. Isolation of high yielding lines from the gamma-rays treated population of greengram proved that different doses of gamma rays induced improvement of different yield attributing characters in greengram. (author)
Optimising yield and resource utilisation of summer maize under the conditions of increasing density and reducing nitrogen fertilization

Science.gov (United States)

Wei, Shanshan; Wang, Xiangyu; Zhu, Qicen; Jiang, Dong; Dong, Shuting

2017-12-01

The inefficient use of resources always poses risks of maize ( Zea mays L.) yield reduction in China. We performed this research to monitor the effects of increasing plant density and reducing nitrogen (N) rate on radiation-use efficiency (RUE), N efficiency traits, grain yield (GY) and their inter-relationships. Besides, whether GY and resource-use efficiency can both be maximized was examined. Hence, a 2-year field experiment was conducted using a widely grown variety "Denghai 618" in Shandong, China. Treatments contained two different plant densities [67,500 (D1) and 97,500 (D2) plant ha-1] and three N levels [0 (N-2), 180 (N-1), 360 (Nck) kg ha-1], set D1Nck as control. Significant increases in grain yield, biomass, RUE, above-ground N uptake (AGN) and N efficiency were observed when density increased from D1 to D2. Declining N application was accompanied by reductions in yield, RUE and AGN especially under high density, yet an obvious improvement in N recovery efficiency (NRE), agronomic N efficiency and N partial factor productivity. The increased GY was positive related with population biomass ( r = 0.895**), RUE ( r = 0.769**) and AGN ( r = 0.923**), whereas it has no significant correlation with N efficiency. In this study, D2Nck obtained 18.8, 17.9, 24.8 and 29.7% higher grain yield, RUE, AGN and NRE respectively, compared to control, optimizing both yield and the efficiencies of radiation and N use. Furthermore, higher yield and RUE with more desirable N efficiency may be possible via optimizing density and N rate combination.
Impact of Humic Acid on Yield and Quality of Sugar Beet (Beta vulgaris L. Grown on Calcareous Soil

Directory of Open Access Journals (Sweden)

Ghorbanali RASSAM

2015-09-01

Full Text Available A field experiment was performed to determine the effects of using humic acid with irrigation on quantitative and qualitative yield traits of sugar beet grown on calcareous soils in Esfaraen, located in the North-East of Iran. Treatments consisted of three levels of humic acid concentration (zero or control, 2.5 and 5 L ha-1 and the number of applications (once 45 days after planting; twice, 45 and 75 days after planting; three times, respectively 45, 75 and 105 days after planting. The effect of the two experimental factors on sugar beet yield traits such as the content of sucrose, refined sugar, molasses forming substances, root yield and refined sugar yield were evaluated. The results proved the existence of a significant interaction between humic acid concentration and the number of applications on all parameters under study. The application of humic acid caused a significant increase of sucrose, refined sugar, root yield and refined sugar yield and a reduction in molasses forming substances content, compared to the control. The increased amount of sucrose and refined sugar content in all applications in concentration of 2.5 L ha-1 humic acid was more than with 5 L ha-1. Similarly, the content of molasses forming substances showed more reduction in 2.5 L ha-1 than in 5 L ha-1 treatment. However, the results revealed that the highest root yield and refined sugar yield, as the main qualitative and quantitative parameters of sugar beet yield, were achieved by three times application of 5 L ha-1 that had 24 and 37% increase compared to control.
Water yield issues in the jarrah forest of south-western Australia

Science.gov (United States)

Ruprecht, J. K.; Stoneman, G. L.

1993-10-01

The jarrah forest of south-western Australia produces little streamflow from moderate rainfall. Water yield from water supply catchments for Perth, Western Australia, are low, averaging 71 mm (7% of annual rainfall). The low water yields are attributed to the large soil water storage available for continuous use by the forest vegetation. A number of water yield studies in south-western Australia have examined the impact on water yield of land use practices including clearing for agricultural development, forest harvesting and regeneration, forest thinning and bauxite mining. A permanent reduction in forest cover by clearing for agriculture led to permanent increases of water yield of approximately 28% of annual rainfall in a high rainfall catchment. Thinning of a high rainfall catchment led to an increase in water yield of 20% of annual rainfall. However, it is not clear for how long the increased water yield will persist. Forest harvesting and regeneration have led to water yield increases of 16% of annual rainfall. The subsequent recovery of vegetation cover has led to water yields returning to pre-disturbance levels after an estimated 12-15 years. Bauxite mining of a high rainfall catchment led to a water yield increase of 8% of annual rainfall, followed by a return to pre-disturbance water yield after 12 years. The magnitude of specific streamflow generation mechanisms in small catchments subject to forest disturbance vary considerably, typically in a number of distinct stages. The presence of a permanent groundwater discharge area was shown to be instrumental in determining the magnitude of the streamflow response after forest disturbance. The long-term prognosis for water yield from areas subject to forest thinning, harvesting and regeneration, and bauxite mining are uncertain, owing to the complex interrelationship between vegetation cover, tree height and age, and catchment evapotranspiration. Management of the forest for water yield needs to acknowledge
VARIABILITY OF YIELD AND YIELD COMPONENTS IN “EGUSI ...

African Journals Online (AJOL)

journal

Estimate of expected genetic advance in seed yield plant-1 ranged between. 25.90-48.40%. ..... values in fruit and seed yield characters have been reported in culinary melon, ... and Khund, A. 2004. Extent of heterosis and heritability in some.
China: The Impact of Climate Change to 2030. A Commissioned Research Report

Science.gov (United States)

2009-04-01

Production of certain varieties of maize that have a relatively long growth period and high yield have increased overall productivity. Since the 1950s...reductions in yields of rice, maize and wheat of up to 37 percent. In the next 20-50 years, agricultural production may be seriously affected...coal is its cheapest and largest domestic fossil resource, China faces a daunting challenge for closing its energy gap and mitigating greenhouse gas
IFC Jobs Study : Assessing Private Sector Contributions to Job Creation and Poverty Reduction

OpenAIRE

International Finance Corporation

2013-01-01

This report is the result of an open-source study to assess the direct and indirect effects of private sector activity on job creation. The report examines how and under what conditions the private sector can best contribute to job creation and poverty reduction. The private sector, which provides some 90 percent of jobs in developing countries, must be at the core of any response to this ...
Fission product yields

International Nuclear Information System (INIS)

Valenta, V.; Hep, J.

1978-01-01

Data are summed up necessary for determining the yields of individual fission products from different fissionable nuclides. Fractional independent yields, cumulative and isobaric yields are presented here for the thermal fission of 235 U, 239 Pu, 241 Pu and for fast fission (approximately 1 MeV) of 235 U, 238 U, 239 Pu, 241 Pu; these values are included into the 5th version of the YIELDS library, supplementing the BIBFP library. A comparison is made of experimental data and possible improvements of calculational methods are suggested. (author)
Thermogravimetric study of reduction of oxides present in oxidized nickel-base alloy powders

Science.gov (United States)

Herbell, T. P.

1976-01-01

Carbon, hydrogen, and hydrogen plus carbon reduction of three oxidized nickel-base alloy powders (a solid solution strengthened alloy both with and without the gamma prime formers aluminum and titanium and the solid solution strengthened alloy NiCrAlY) were evaluated by thermogravimetry. Hydrogen and hydrogen plus carbon were completely effective in reducing an alloy containing chromium, columbium, tantalum, molybdenum, and tungsten. However, with aluminum and titanium present the reduction was limited to a weight loss of about 81 percent. Carbon alone was not effective in reducing any of the alloys, and none of the reducing conditions were effective for use with NiCrAlY.
Scale effects and variability of forest–water yield relationships on the Loess Plateau, China

Science.gov (United States)

Chao Bi; Huaxing Bi; Ge Sun; Yifang Chang; Lubo Gao

2014-01-01

The relationship between forests and water yield on the Loess Plateau is a concern to forest hydrologists and local governments. Most research indicates that forests reduce runoff but the degree of reduction is different at different sites. Data on precipitation, runoff depth, evapotranspiration and forest cover were collected for 67 watersheds through synthesizing...
Exploring the effects of nitrogen fertilization management alternatives on nitrate loss and crop yields in tile-drained fields in Illinois.

Science.gov (United States)

Jeong, Hanseok; Bhattarai, Rabin

2018-05-01

It is vital to manage the excessive use of nitrogen (N) fertilizer in corn production, the single largest consumer of N fertilizer in the United States, in order to achieve more sustainable agroecosystems. This study comprehensively explored the effects of N fertilization alternatives on nitrate loss and crop yields using the Root Zone Water Quality Model (RZWQM) in tile-drained fields in central Illinois. The RZWQM was tested for the prediction of tile flow, nitrate loss, and crop yields using eight years (1993-2000) of observed data and showed satisfactory model performances from statistical and graphical evaluations. Our model simulations demonstrated the maximum return to nitrogen (MRTN) rate (193 kgha -1 ), a newly advised N recommendation by the Illinois Nutrient Loss Reduction Strategy (INLRS), can be further reduced. Nitrate loss was reduced by 10.3% and 29.8%, but corn yields decreased by 0.3% and 1.9% at 156 and 150 kgha -1 of N fertilizer rate in the study sites A and E, respectively. Although adjustment of N fertilization timing presented a further reduction in nitrate loss, there was no optimal timing to ensure nitrate loss reduction and corn productivity. For site A, 100% spring application was the most productive and 40% fall, 10% pre-plant, and 50% side dress application generated the lowest nitrate loss. For site E, the conventional N application timing was verified as the best practice in both corn production and nitrate loss reduction. Compared to surface broadcast placement, injected N fertilizer in spring increased corn yield, but may also escalate nitrate loss. This study presented the need of an adaptive N fertilizer management due to the heterogeneity in agricultural systems, and raised the importance of timing and placement of N fertilizer, as well as further reduction in fertilizer rate to devise a better in-field N management practice. Copyright © 2018 Elsevier Ltd. All rights reserved.
Impact of urbanization on the sediment yield in tropical watershed using temporal land-use changes and a GIS-based model

Directory of Open Access Journals (Sweden)

Bello Al-Amin D.

2017-09-01

Full Text Available Abundant rainfall areas promote sediment yield at both sub-watershed and watershed scale due to soil erosion and increase siltation of river channel, but it can be curtailed through planned urbanization. The urbanization of Skudai watershed is analysed from historical and future perspective. A GIS-based model (Hydrological Simulation Programme-FORTRAN-HSPF is used to modelled sediment flow using basin-wide simulation, and the output result is utilized in evaluating sediment yield reduction due to increased urbanization by swapping multiple temporal land-use of decadent time-steps. The analysis indicates that sediment yield reduces with increase urban built-up and decrease forest and agricultural land. An estimated 12 400 tons of sediment will be reduced for every 27% increase in built-up areas under high rainfall condition and 1 490 tons at low rainfall. The sensitivity analysis of land-use classes shows that built-up, forest and barren are more sensitive to sediment yield reduction compared to wetland and agricultural land at both high and low rainfall. The result of the study suggests that increased urbanization reduced sediment yield in proportion to the rainfall condition and can be used as an alternative approach for soil conservation at watershed scale independent of climate condition.

Characterization of yield reduction in Ethiopia using a GIS-based crop water balance model

Science.gov (United States)

Senay, G.B.; Verdin, J.

2003-01-01

In many parts of sub-Saharan Africa, subsistence agriculture is characterized by significant fluctuations in yield and production due to variations in moisture availability to staple crops. Widespread drought can lead to crop failures, with associated deterioration in food security. Ground data collection networks are sparse, so methods using geospatial rainfall estimates derived from satellite and gauge observations, where available, have been developed to calculate seasonal crop water balances. Using conventional crop production data for 4 years in Ethiopia (1996-1999), it was found that water-limited and water-unlimited growing regions can be distinguished. Furthermore, maize growing conditions are also indicative of conditions for sorghum. However, another major staple, teff, was found to behave sufficiently differently from maize to warrant studies of its own.
Linkages among climate change, crop yields and Mexico–US cross-border migration

Science.gov (United States)

Feng, Shuaizhang; Krueger, Alan B.; Oppenheimer, Michael

2010-01-01

Climate change is expected to cause mass human migration, including immigration across international borders. This study quantitatively examines the linkages among variations in climate, agricultural yields, and people's migration responses by using an instrumental variables approach. Our method allows us to identify the relationship between crop yields and migration without explicitly controlling for all other confounding factors. Using state-level data from Mexico, we find a significant effect of climate-driven changes in crop yields on the rate of emigration to the United States. The estimated semielasticity of emigration with respect to crop yields is approximately −0.2, i.e., a 10% reduction in crop yields would lead an additional 2% of the population to emigrate. We then use the estimated semielasticity to explore the potential magnitude of future emigration. Depending on the warming scenarios used and adaptation levels assumed, with other factors held constant, by approximately the year 2080, climate change is estimated to induce 1.4 to 6.7 million adult Mexicans (or 2% to 10% of the current population aged 15–65 y) to emigrate as a result of declines in agricultural productivity alone. Although the results cannot be mechanically extrapolated to other areas and time periods, our findings are significant from a global perspective given that many regions, especially developing countries, are expected to experience significant declines in agricultural yields as a result of projected warming. PMID:20660749
Effect of deformation on crystallite characteristic and yield stress of zircaloy-4

International Nuclear Information System (INIS)

Sugondo; Futichah

2007-01-01

The effect of deformation (rolling) on micro strain, crystallite size, crystallite density, and yield strength of Zircaloy-4 was characterized by x-ray diffraction. The goal of this investigation is to characterize the cladding materials of PWR and the target is to have data on the crystallography of Zircaloy-4. The as-received material with the composition 1.3% Sn, 0.22% Fe, 0.1% Cr, and Zr balanced was cut 10 mm × 100 mm in size using diamond blade. The samples were cleaned and heated at 1100 °C for 2 hours and then quenched in cold water. Then the sample were cleaned and heated at 750 °C for 2 hours. Afterward the samples were cold rolled with 40%, 75%, and 80% reduction in thickness. After the preparation was completed, the crystals of the samples were characterized using X-ray diffraction. The processes being analysed were quenching followed by annealing, plastic deformation of annealing and reduction from 40% to 80%, and the constancy of the c/a ratio. From the analyses, three conclusions were obtained. Firstly, the annealing process at 750 °C of Zircaloy-4 from the quenched samples resulted in the recrystallization and the grain growth which was proven by the increase of micro strain from 25.05% to 32.83%, the increase of crystallite size from 10.1015 Å to 287.4798 Å, the decrease of dislocation density from 2.94E+16 m/m3 to 3.63E+13 m/m3, and the decrease of yield strength from 1125.52 MPa to 304.44 MPa. Secondly, the process of reduction of Zircaloy-4 from the annealed samples reduced to 80% resulted in the plastic deformation and crystallite which was shown by the decrease of micro strain from 32.83% to 3.15%, the decrease of crystallite size from 287.4798 Å to 10.9764 Å, the increase of dislocation density from 3.63E+13 m/m3 to 2.49E+16 m/m3, and the increase of yield strength from 304.44 MPa to 1057.69 MPa. Thirdly, the process of plastic deformation of Zircaloy-4 was limited by the constancy of the c/a ratio which was verified by the decrease
Investigation of relationship between sediment yield and landslide in Iran

Directory of Open Access Journals (Sweden)

Samad Shadfar

2012-07-01

Full Text Available Landslides have been made irreversible damage to urban areas and economic in Iran. In this research, at first, for Investigation of relationship between landslide and sediment yield was recognized some of effective factors on Landslide. These Factors were processed with use of ILWIS and Arc GIS software’s. Landslide hazard zonation was done using Density Area and Index Overlay methods in GIS and evaluated them using Quality Sum index. In after phase, were determined sediment yield in each of them. Finally, occurrence rate landslide investigated in sediment yield zones. The results indicated that, slope, lithology and distance from the hydrographic network have the greatest impact on landslides. Most of the landslides have occurred in the 15-40% slope class, units of conglomerate and marl, and within one km of drainage network. On the other hand, the relationship between landslide frequency and distance of the fault was not a linear relationship and Almost 60 %of landslides have occurred distance of one km of the faults. Evaluation using Quality Sum index showed that the density Area has a more logical answer and as Appropriate method will be introduced in the basin. Investigation of deposition potential in sub-basins showed that Javaherdeh sub basin with 92.74 deposition potential is the first priority. Nedasht and latmohalleh sub basins, each with a deposition potential of 20.08 are the next priorities. Relationship between landslide area and deposition potential were identified as 8/91% of the landslides in the area of low And about 79 percent of landslides are located in high and very high deposition potentials.
Centralised electricity production from winter cereals biomass grown under central-northern Spain conditions: Global warming and energy yield assessments

International Nuclear Information System (INIS)

Sastre, C.M.; Maletta, E.; González-Arechavala, Y.; Ciria, P.; Santos, A.M.; Val, A. del; Pérez, P.; Carrasco, J.

2014-01-01

Highlights: • We assess the sustainability of electricity production from winter cereals biomass. • Productivity ranks are generated from different genotypes cultivated in real farms. • GHG and energy balances show better performance compared to natural gas electricity. • Cereals yields below 8 odt/ha do not accomplish objective 60% of GHG savings. • Marginal yields and sustainability criteria are discussed suggesting optimization. - Abstract: The goal of this paper is to assess the sustainability of electricity production from winter cereals grown in one of the most important Spanish agricultural areas, Castilla y León Region, situated in central-northern Spain. This study analyses greenhouse gases (GHG) emissions and energy balances of electricity production in a 25 MWe power plant that was powered using straw biomass from three annual winter cereals (rye, triticale and oat) grown as dedicated energy crops. The results of these analyses were compared with those of electricity produced from natural gas in Spanish power plants. Assessments were performed using a wide range of scenarios, mainly based on the biomass yield variability obtained in demonstration plots of twelve different winter cereal genotypes. Demonstration plots were established in two different locations (provinces of Soria and León) of the Castilla y León Region during two crop seasons (2009/2010 and 2010/2011) using common management practices and input rates for rain-fed agriculture in these regions. Our results suggest that production of electricity from winter cereals biomass combustion yielded considerable reductions in terms of GHG emissions when compared to electricity from natural gas. Nevertheless, the results show that low biomass yields that are relatively frequent for Spanish farmers on low productivity lands may produce no significant reductions in GHG in comparison with electricity from natural gas. Consequently, the agronomic management of winter cereals should be re
yield and yield componemts of extra early maize (zea mays l.)

African Journals Online (AJOL)

SHARIFAI

maize crop and improve the soil structures and chemical nutrients of the soil. The significant interaction between intra-row spacing and poultry manure on cob diameter, 100 grain weight and grain yield showed the importance of poultry manure on yield and yield components of maize crop. Poultry manure increases both ...
An adapted yield criterion for the evolution of subsequent yield surfaces

Science.gov (United States)

Küsters, N.; Brosius, A.

2017-09-01

In numerical analysis of sheet metal forming processes, the anisotropic material behaviour is often modelled with isotropic work hardening and an average Lankford coefficient. In contrast, experimental observations show an evolution of the Lankford coefficients, which can be associated with a yield surface change due to kinematic and distortional hardening. Commonly, extensive efforts are carried out to describe these phenomena. In this paper an isotropic material model based on the Yld2000-2d criterion is adapted with an evolving yield exponent in order to change the yield surface shape. The yield exponent is linked to the accumulative plastic strain. This change has the effect of a rotating yield surface normal. As the normal is directly related to the Lankford coefficient, the change can be used to model the evolution of the Lankford coefficient during yielding. The paper will focus on the numerical implementation of the adapted material model for the FE-code LS-Dyna, mpi-version R7.1.2-d. A recently introduced identification scheme [1] is used to obtain the parameters for the evolving yield surface and will be briefly described for the proposed model. The suitability for numerical analysis will be discussed for deep drawing processes in general. Efforts for material characterization and modelling will be compared to other common yield surface descriptions. Besides experimental efforts and achieved accuracy, the potential of flexibility in material models and the risk of ambiguity during identification are of major interest in this paper.
Effect of genotype and applied management on alfalfa yield and quality

Directory of Open Access Journals (Sweden)

Milić Dragan

2014-01-01

Full Text Available It is essential to apply advanced management for successful production of alfalfa hay with premium quality (high content of protein and minerals. The maximum yield and the best quality of alfalfa in Serbia can be obtained by cutting four or five times per year. In alfalfa stands, use of cutting system with three cuts per year is inefficient and does not allow full exploitation of cultivar genetic potential and environmental conditions. It is possible, and economically beneficial to grow alfalfa on pseudoglay soils after application of lime and organic manure, with recommended rates 2.5 t ha-1 lime and 30 t ha-1 manure. Cutting alfalfa at the beginning of flowering stage (5 cuts per year provides hay with better quality - higher content of crude protein and lower portion of fibre fractions (neutral detergent fibre, acid detergent fibre, acid detergent lignin, and there is no reduction in dry matter yield. There is no differences in alfalfa quality after application of lower (2.5 t ha-1 and higher dose (5.0 t ha-1 of lime + 30 t ha-1 of organic manure, but there is significant increase of dry matter yield and protein yield per hectare followed by higher level of metabolic energy per unit area. Upon the results of this study, base of successful alfalfa production would be to develop management system and cultivars for different environments that would maximize hay yields without significant loses of quality.
Establishing a high yielding streptomyces-based cell-free protein synthesis system.

Science.gov (United States)

Li, Jian; Wang, He; Kwon, Yong-Chan; Jewett, Michael C

2017-06-01

Cell-free protein synthesis (CFPS) has emerged as a powerful platform for applied biotechnology and synthetic biology, with a range of applications in synthesizing proteins, evolving proteins, and prototyping genetic circuits. To expand the current CFPS repertoire, we report here the development and optimization of a Streptomyces-based CFPS system for the expression of GC-rich genes. By developing a streamlined crude extract preparation protocol and optimizing reaction conditions, we were able to achieve active enhanced green fluorescent protein (EGFP) yields of greater than 50 μg/mL with batch reactions lasting up to 3 h. By adopting a semi-continuous reaction format, the EGFP yield could be increased to 282 ± 8 μg/mL and the reaction time was extended to 48 h. Notably, our extract preparation procedures were robust to multiple Streptomyces lividans and Streptomyces coelicolor strains, although expression yields varied. We show that our optimized Streptomyces lividans system provides benefits when compared to an Escherichia coli-based CFPS system for increasing percent soluble protein expression for four Streptomyces-originated high GC-content genes that are involved in biosynthesis of the nonribosomal peptides tambromycin and valinomycin. Looking forward, we believe that our Streptomyces-based CFPS system will contribute significantly towards efforts to express complex natural product gene clusters (e.g., nonribosomal peptides and polyketides), providing a new avenue for obtaining and studying natural product biosynthesis pathways. Biotechnol. Bioeng. 2017;114: 1343-1353. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.
Effect of algal biofertilizer on yield and protein content of rice

Energy Technology Data Exchange (ETDEWEB)

Antarikanonda, P.; Amarit, P.; Chetsumon; Tancharoenrat, P.

Four strains of nitrogen fixing blue-green algae, namely Anabaena siamensis, Anabaena lutea, Nostoc sp. 46 and Nostoc sp. 79. Mixed cultures were applied as biofertilizers to four paddy soil samples, taken from Rangsit, Khok Sumrong, Sakhon Nakorn and Surin areas. Pots which were arranged in completely randomized design consisted of 3 replications and 2 treatment in each replication. These treatments comprise an unbiofertilizer and a biofertilizer which biofertilizer rate was applied equally at 4 grams of blue green algae per 10 kilograms of soil sample. The results showed that algal biofertilizer enhanced the growth and yield of the rice significantly, which was noticeable in the dry weight of the straw and grain of rice, for all sources of soil. Grain yield of rice in these soils increased form the check of 32.07, 34.87, 8.86 and 21.49 to 53.14, 49.53, 20.02, and 49.60 grams per pot, respectively. The responsiveness of rice which received algal biofertilizer was different. The percentage increase in yield ranged from 42% in Khok Sumrong soil and 66% in Rangsit soil, to 126 and 131% in Sakhon Nakorn and Surin soil, respectively. Significant increase in protein content of rice with the application of algal biofertilizer was from the check of 5.03, 5.14, 6.75 and 5.25 to 6.45, 6.53, 7.80 and 7.11 percent respectively. The difference in plant N-uptake level, after the application algal biofertilizer gave 383.50, 310.00, 222.20 and 480.70 milligrams per pot, respectively.
The role of ants, birds and bats for ecosystem functions and yield in oil palm plantations.

Science.gov (United States)

Denmead, Lisa H; Darras, Kevin; Clough, Yann; Diaz, Patrick; Grass, Ingo; Hoffmann, Munir P; Nurdiansyah, Fuad; Fardiansah, Rico; Tscharntke, Teja

2017-07-01

One of the world's most important and rapidly expanding crops, oil palm, is associated with low levels of biodiversity. Changes in predator communities might alter ecosystem services and subsequently sustainable management but these links have received little attention to date. Here, for the first time, we manipulated ant and flying vertebrate (birds and bats) access to oil palms in six smallholder plantations in Sumatra (Indonesia) and measured effects on arthropod communities, related ecosystem functions (herbivory, predation, decomposition and pollination) and crop yield. Arthropod predators increased in response to reductions in ant and bird access, but the overall effect of experimental manipulations on ecosystem functions was minimal. Similarly, effects on yield were not significant. We conclude that ecosystem functions and productivity in oil palm are, under current levels of low pest pressure and large pollinator populations, robust to large reductions of major predators. © 2017 by the Ecological Society of America.
Effects of fertilization and three years of throughfall reduction on leaf physiology of loblolly pine

Science.gov (United States)

Charles J. Pell; Lisa J. Samuelson

2016-01-01

Climate models project decreased soil water availability in the southeastern United States, whichÂ may impact loblolly pine (Pinus taeda L.) productivity. In conjunction with an interdisciplinary project known asÂ PINEMAP, the objective of this study was to investigate the interactive effects of fertilization and a 30 percentÂ reduction in throughfall on physiological...
Preparation of hafnium metal by calciothermic reduction of HfO2

International Nuclear Information System (INIS)

Sharma, I.G.; Vijay, P.L.; Sehra, J.C.; Sundaram, C.V.

1975-01-01

Hafnium metal powder has been produced by the calciothermic reduction of hafnium oxide. The influence of various experimental parameters - such as amount of calcium in excess of stoichiometric requirement, temperature, and time of reduction - on the yield and purity of the metal has been studied. The metal powder obtained by reduction at 960 0 C (two hours) with a calcium excess of 70% analysed 600 ppm of oxygen and 147 ppm of nitrogen. A reduction efficiency of 96% has been achieved under these conditions. The refining of the powder by electron beam melting, fused salt electrolysis, and iodide process has been studied. The oxygen content in the metal could be brought down from 6900 to 148 ppm by electron beam melt-refining. (author)
Neglecting rice milling yield and quality underestimates economic losses from high-temperature stress.

Directory of Open Access Journals (Sweden)

Nathaniel B Lyman

Full Text Available Future increases in global surface temperature threaten those worldwide who depend on rice production for their livelihoods and food security. Past analyses of high-temperature stress on rice production have focused on paddy yield and have failed to account for the detrimental impact of high temperatures on milling quality outcomes, which ultimately determine edible (marketable rice yield and market value. Using genotype specific rice yield and milling quality data on six common rice varieties from Arkansas, USA, combined with on-site, half-hourly and daily temperature observations, we show a nonlinear effect of high-temperature stress exposure on yield and milling quality. A 1 °C increase in average growing season temperature reduces paddy yield by 6.2%, total milled rice yield by 7.1% to 8.0%, head rice yield by 9.0% to 13.8%, and total milling revenue by 8.1% to 11.0%, across genotypes. Our results indicate that failure to account for changes in milling quality leads to understatement of the impacts of high temperatures on rice production outcomes. These dramatic losses result from reduced paddy yield and increased percentages of chalky and broken kernels, which together decrease the quantity and market value of milled rice. Recently published estimates show paddy yield reductions of up to 10% across the major rice-producing regions of South and Southeast Asia due to rising temperatures. The results of our study suggest that the often-cited 10% figure underestimates the economic implications of climate change for rice producers, thus potentially threatening future food security for global rice producers and consumers.
Exact Solutions of Generalized Modified Boussinesq, Kuramoto-Sivashinsky, and Camassa-Holm Equations via Double Reduction Theory

Directory of Open Access Journals (Sweden)

Zulfiqar Ali

2013-01-01

Full Text Available We find exact solutions of the Generalized Modified Boussinesq (GMB equation, the Kuromoto-Sivashinsky (KS equation the and, Camassa-Holm (CH equation by utilizing the double reduction theory related to conserved vectors. The fourth order GMB equation involves the arbitrary function and mixed derivative terms in highest derivative. The partial Noether’s approach yields seven conserved vectors for GMB equation and one conserved for vector KS equation. Due to presence of mixed derivative term the conserved vectors for GMB equation derived by the Noether like theorem do not satisfy the divergence relationship. The extra terms that constitute the trivial part of conserved vectors are adjusted and the resulting conserved vectors satisfy the divergence property. The double reduction theory yields two independent solutions and one reduction for GMB equation and one solution for KS equation. For CH equation two independent solutions are obtained elsewhere by double reduction theory with the help of conserved Vectors.
Inheritance of grain yield and its correlation with yield components in ...

African Journals Online (AJOL)

SAM

2014-03-19

Mar 19, 2014 ... 7 × 7 incomplete diallel cross of seven wheat parents during the crop season of 2009 to 2010. Mean square of general ... Genetic background and yield traits of the seven parents. Parent. Pedigree. Released year ..... Correlation and path analysis for yield and yield contributing characters in wheat (Triticum ...
GLOBAL GOVERNANCE AND POVERTY REDUCTION THIS MILLENNIUM: NIGERIAN EXPERIENCE

Directory of Open Access Journals (Sweden)

John N. N. Ugoani

2015-12-01

Full Text Available Issue of global poverty became very worrisome that the United Nations Millennium Summit in 2000 placed it at the heart of global agenda to halve 1990 extreme poverty and hunger rates by the end of 2015. This means that the percentage of improvised people defined by the World Bank as those living on less than $1.25 a day must fall to 25 percent by the end of this year, while the proportion of people without adequate food security must be reduced to 12.5 percent. To achieve the aim, global leaders agreed to set a time-bound and measurable goals and targets. The United Nations believes that achieving the target which involves improvements in standards of living, universal primary education, empowerment of women, reduction in mortality rates, unemployment, among others, requires a global partnership with national governments, multinational agencies through global governance architecture. The ideal of global governance is a process of co-operative leadership that brings together national governments, multilateral public agencies and civil society to achieve commonly accepted goals. It provides strategic direction and then marshals collective energies to address global challenges. It is inclusive, dynamic and operates across national and sectoral boundaries and interests. It is this perspective of global governance that drives the Millennium Development Goals agenda toward global poverty reduction. This perspective is making positive contributions with some regions in the world heading toward the achievement of the target. Even those countries in sub-saharan Africa where most of the global poor live and who are lagging behind, are making frantic efforts to do so, with the assistance of global bodies like the world bank, IMF, UNIDO, among others. The beauty of global governance is that it appears to be more democratic than authoritarian, more openly political than bureaucratic, and more integrated than specialized. This is the level that drives the
The Induced Dimension Reduction method applied to convection-diffusion-reaction problems

NARCIS (Netherlands)

Astudillo, R.; Van Gijzen, M.B.

2016-01-01

Discretization of (linearized) convection-diffusion-reaction problems yields a large and sparse non symmetric linear system of equations, Ax = b. (1) In this work, we compare the computational behavior of the Induced Dimension Reduction method (IDR(s)) [10], with other short-recurrences Krylov
Projected land use changes impacts on water yields in the karst mountain areas of China

Science.gov (United States)

Lang, Yanqing; Song, Wei; Deng, Xiangzheng

2018-04-01

Human-induced land use changes over short time scales have significant impacts on water yield, especially in China because of the rapid social economic development. As the biggest developing country of the world, China's economy is expected to continuously grow with a high speed in the next few decades. Therefore, what kind of land use changes will occur in the future in China? How these changes will influence the water yields? To address this issue, we assessed the water yields in the karst mountain area of China during the periods of 1990-2010 and 2010-2030 by coupling an Integrated Valuation of Ecosystem Services and Tradeoffs (InVEST) model and a Conversion of Land Use and its Effects (CLUE) model. Three different land use scenarios i.e. natural growth, economic development, and ecological protection, were developed in 2030 using the CLUE model. It was concluded that, given land use changes between 1990 and 2010, total water yields in the karst mountain area are characterized by a trend towards fluctuating reduction. However, total water yields of 2030 in the economic development scenario revealed an increase of 1.25% compared to the actual water yields in 2010. The economy development in karst mountain areas of China in the future has a slight positive influence on water yields.
Evidence for a weakening strength of temperature-corn yield relation in the United States during 1980–2010

Energy Technology Data Exchange (ETDEWEB)

Leng, Guoyong

2017-12-01

Temperature is known to be correlated with crop yields, causing reduction of crop yield with climate warming without adaptations or CO2 fertilization effects. The historical temperature-crop yield relation has often been used for informing future changes. This relationship, however, may change over time following alternations in other environmental factors. Results show that the strength of the relationship between the interannual variability of growing season temperature and corn yield (RGST_CY) has declined in the United States between 1980 and 2010 with a loss in the statistical significance. The regression slope which represents the anomalies in corn yield that occur in association with 1 degree temperature anomaly has decreased significantly from -6.9%/K of the first half period to -2.4%/K~-3.5%/K of the second half period. This implies that projected corn yield reduction will be overestimated by a fact of 2 in a given warming scenario, if the corn-temperature relation is derived from the earlier historical period. Changes in RGST_CY are mainly observed in Midwest Corn Belt and central High Plains, and are well reproduced by 11 process-based crop models. In Midwest rain-fed systems, the decrease of negative temperature effects coincides with an increase in water availability by precipitation. In irrigated areas where water stress is minimized, the decline of beneficial temperature effects is significantly related to the increase in extreme hot days. The results indicate that an extrapolation of historical yield response to temperature may bias the assessment of agriculture vulnerability to climate change. Efforts to reduce climate impacts on agriculture should pay attention not only to climate change, but also to changes in climate-crop yield relations. There are some caveats that should be acknowledged as the analysis is restricted to the changes in the linear relation between growing season mean temperature and corn yield for the specific study period.

EnviroAtlas - Des Moines, IA - Estimated Percent Tree Cover Along Walkable Roads

Data.gov (United States)

U.S. Environmental Protection Agency — This EnviroAtlas dataset estimates tree cover along walkable roads. The road width is estimated for each road and percent tree cover is calculated in a 8.5 meter...
EnviroAtlas - Green Bay, WI - Estimated Percent Tree Cover Along Walkable Roads

Data.gov (United States)

U.S. Environmental Protection Agency — This EnviroAtlas dataset estimates tree cover along walkable roads. The road width is estimated for each road and percent tree cover is calculated in a 8.5 meter...
EnviroAtlas - New York, NY - Estimated Percent Tree Cover Along Walkable Roads

Data.gov (United States)

U.S. Environmental Protection Agency — This EnviroAtlas dataset estimates tree cover along walkable roads. The road width is estimated for each road and percent tree cover is calculated in a 8.5 meter...
EnviroAtlas - New Bedford, MA - Estimated Percent Tree Cover Along Walkable Roads

Data.gov (United States)

U.S. Environmental Protection Agency — This EnviroAtlas dataset estimates tree cover along walkable roads. The road width is estimated for each road and percent tree cover is calculated in a 8.5 meter...
THE DEEP2 GALAXY REDSHIFT SURVEY: DESIGN, OBSERVATIONS, DATA REDUCTION, AND REDSHIFTS

International Nuclear Information System (INIS)

Newman, Jeffrey A.; Cooper, Michael C.; Davis, Marc; Faber, S. M.; Guhathakurta, Puragra; Koo, David C.; Phillips, Andrew C.; Conroy, Charlie; Harker, Justin J.; Lai, Kamson; Coil, Alison L.; Dutton, Aaron A.; Finkbeiner, Douglas P.; Gerke, Brian F.; Rosario, David J.; Weiner, Benjamin J.; Willmer, C. N. A.; Yan Renbin; Kassin, Susan A.; Konidaris, N. P.

2013-01-01

We describe the design and data analysis of the DEEP2 Galaxy Redshift Survey, the densest and largest high-precision redshift survey of galaxies at z ∼ 1 completed to date. The survey was designed to conduct a comprehensive census of massive galaxies, their properties, environments, and large-scale structure down to absolute magnitude M B = –20 at z ∼ 1 via ∼90 nights of observation on the Keck telescope. The survey covers an area of 2.8 deg 2 divided into four separate fields observed to a limiting apparent magnitude of R AB = 24.1. Objects with z ∼ 0.7 to be targeted ∼2.5 times more efficiently than in a purely magnitude-limited sample. Approximately 60% of eligible targets are chosen for spectroscopy, yielding nearly 53,000 spectra and more than 38,000 reliable redshift measurements. Most of the targets that fail to yield secure redshifts are blue objects that lie beyond z ∼ 1.45, where the [O II] 3727 Å doublet lies in the infrared. The DEIMOS 1200 line mm –1 grating used for the survey delivers high spectral resolution (R ∼ 6000), accurate and secure redshifts, and unique internal kinematic information. Extensive ancillary data are available in the DEEP2 fields, particularly in the Extended Groth Strip, which has evolved into one of the richest multiwavelength regions on the sky. This paper is intended as a handbook for users of the DEEP2 Data Release 4, which includes all DEEP2 spectra and redshifts, as well as for the DEEP2 DEIMOS data reduction pipelines. Extensive details are provided on object selection, mask design, biases in target selection and redshift measurements, the spec2d two-dimensional data-reduction pipeline, the spec1d automated redshift pipeline, and the zspec visual redshift verification process, along with examples of instrumental signatures or other artifacts that in some cases remain after data reduction. Redshift errors and catastrophic failure rates are assessed through more than 2000 objects with duplicate
Effects of cutting frequency on alfalfa yield and yield components in ...

African Journals Online (AJOL)

Effects of cutting frequency on alfalfa yield and yield components in Songnen Plain, Northeast China. J Chen, F Tang, R Zhu, C Gao, G Di, Y Zhang. Abstract. The productivity and quality of alfalfa (Medicago sativa L.) is strongly influenced by cutting frequency (F). To clarify that the yield and quality of alfalfa if affected by F, ...
Heterogeneous catalysis in fluoride melts - reduction of uranium(V) by hydrogen

Energy Technology Data Exchange (ETDEWEB)

Kelmers, A D; Bennett, M R [Oak Ridge National Lab., Tenn. (USA)

1976-01-01

A necessary step in fuel reprocessing for the Molten-Salt Breeder Reactor is the reduction of pentavalent uranium to tetravalent uranium by hydrogen gas. The pentavalent uranium is dissolved in a mixed fluoride melt. Results are presented which show that the hydrogen reduction is rate limited, possibly due to the dissociation of hydrogen molecules to yield active hydrogen atoms; and that by the application of platinum catalysts a 10- to 100-fold increase in the reaction rate can be achieved.
40 CFR 60.1445 - What are the emission limits for air curtain incinerators that burn 100 percent yard waste?

Science.gov (United States)

2010-07-01

... curtain incinerators that burn 100 percent yard waste? 60.1445 Section 60.1445 Protection of Environment... Air Curtain Incinerators That Burn 100 Percent Yard Waste § 60.1445 What are the emission limits for air curtain incinerators that burn 100 percent yard waste? If your air curtain incinerator combusts...
Photo catalytic reduction of benzophenone on TiO2: Effect of preparation method and reaction conditions

International Nuclear Information System (INIS)

Albiter E, E.; Valenzuela Z, M. A.; Alfaro H, S.; Flores V, S. O.; Rios B, O.; Gonzalez A, V. J.; Cordova R, I.

2010-01-01

The photo catalytic reduction of benzophenone was studied focussing on improving the yield to benzhydrol. TiO 2 was synthesized by means of a hydrothermal technique. TiO 2 (Degussa TiO 2 -P25) was used as a reference. Catalysts were characterized by X-ray diffraction and nitrogen physisorption. The photo catalytic reduction was carried out in a batch reactor at 25 C under nitrogen atmosphere, acetonitrile as solvent and isopropanol as electron donor. A 200 W Xe-Hg lamp (λ= 360 nm) was employed as irradiation source. The chemical composition of the reaction system was determined by HPLC. Structural and textural properties of the synthesized TiO 2 depended on the type of acid used during sol formation step. Using HCl, a higher specific surface area and narrower pore size distribution of TiO 2 was obtained in comparison with acetic acid. As expected, the photochemical reduction of benzophenone yielded benzopinacol as main product, whereas, benzhydrol is only produced in presence of TiO 2 (i.e. photo catalytic route). In general, the hydrothermally synthesized catalysts were less active and with a lower yield to benzhydrol. The optimal reaction conditions to highest values of benzhydrol yield (70-80%) were found at 2 g/L (catalyst loading) and 0.5 m M of initial concentration of benzophenone, using commercial TiO 2 -P25. (Author)
High-yield synthesis and optical response of gold nanostars

Energy Technology Data Exchange (ETDEWEB)

Kumar, Pandian Senthil [Departamento de Quimica Fisica and Unidad Asociada CSIC-Universidade de Vigo, 36310 Vigo (Spain); Pastoriza-Santos, Isabel [Departamento de Quimica Fisica and Unidad Asociada CSIC-Universidade de Vigo, 36310 Vigo (Spain); RodrIguez-Gonzalez, Benito [Departamento de Quimica Fisica and Unidad Asociada CSIC-Universidade de Vigo, 36310 Vigo (Spain); Abajo, F Javier GarcIa de [Instituto de Optica-CSIC, Serrano 121, 28006 Madrid (Spain); Liz-Marzan, Luis M [Departamento de Quimica Fisica and Unidad Asociada CSIC-Universidade de Vigo, 36310 Vigo (Spain)

2008-01-09

Multipod Au nanoparticles (nanostars) with single crystalline tips were synthesized in extremely high yield through the reduction of HAuCl{sub 4} in a concentrated solution of poly(vinylpyrrolidone) (PVP) in N,N-dimethylformamide (DMF), in the presence of preformed Au nanoparticle seeds, but with no need for external energy sources. Nanostar dispersions display a well-defined optical response, which was found (through theoretical modeling) to comprise a main mode confined within the tips and a secondary mode confined in the central body. Calculations of the surface enhanced Raman scattering (SERS) response additionally show that this morphology will be relevant for sensing applications.
High-yield synthesis and optical response of gold nanostars

Science.gov (United States)

Senthil Kumar, Pandian; Pastoriza-Santos, Isabel; Rodríguez-González, Benito; García de Abajo, F. Javier; Liz-Marzán, Luis M.

2008-01-01

Multipod Au nanoparticles (nanostars) with single crystalline tips were synthesized in extremely high yield through the reduction of HAuCl4 in a concentrated solution of poly(vinylpyrrolidone) (PVP) in N,N-dimethylformamide (DMF), in the presence of preformed Au nanoparticle seeds, but with no need for external energy sources. Nanostar dispersions display a well-defined optical response, which was found (through theoretical modeling) to comprise a main mode confined within the tips and a secondary mode confined in the central body. Calculations of the surface enhanced Raman scattering (SERS) response additionally show that this morphology will be relevant for sensing applications.
High-yield synthesis and optical response of gold nanostars

International Nuclear Information System (INIS)

Kumar, Pandian Senthil; Pastoriza-Santos, Isabel; RodrIguez-Gonzalez, Benito; Abajo, F Javier GarcIa de; Liz-Marzan, Luis M

2008-01-01

Multipod Au nanoparticles (nanostars) with single crystalline tips were synthesized in extremely high yield through the reduction of HAuCl 4 in a concentrated solution of poly(vinylpyrrolidone) (PVP) in N,N-dimethylformamide (DMF), in the presence of preformed Au nanoparticle seeds, but with no need for external energy sources. Nanostar dispersions display a well-defined optical response, which was found (through theoretical modeling) to comprise a main mode confined within the tips and a secondary mode confined in the central body. Calculations of the surface enhanced Raman scattering (SERS) response additionally show that this morphology will be relevant for sensing applications
Photochemical reduction of uranyl ion by acetonitrile and propionitrile

International Nuclear Information System (INIS)

Brar, A.S.; Chander, R.; Sandhu, S.S.

1979-01-01

The photochemical reduction of uranyl ion by acetonitrile, propionitrile, benzonitrile, phenylacetonitrile, cyanoacetic acid and malononitrile in aqueous or aq. acetone medium using radiations >= 400 nm from a medium pressure mercury vapour lamp has been investigated. Except acetonitrile and propionitrile all other nitriles fail to bring about the reduction of uranyl ion. The reduction with aceto- and propionitriles has been found to obey pseudo-first order kinetics. The magnitude of rate of reduction with propionitrile is higher than that with acetonitrile. The pseudo-first order rate constants and quenching constant have been calculated from the kinetic data. It has been found that physical and chemical quenching compete with each other. The plot of reciprocal of quantum yield versus reciprocal (nitrile) is linear with a small intercept on the ordinate axis. Absorption spectra of uranyl ion in pure water, in the presence of acid and in the presence of acid+nitrile reveal that there is no ground state interaction between uranyl ion and the nitrile. A mechanism of photochemical reduction of uranyl ion based on α-hydrogen abstraction from the nitrile has been proposed. (auth.)
Two-stage Catalytic Reduction of NOx with Hydrocarbons

Energy Technology Data Exchange (ETDEWEB)

Umit S. Ozkan; Erik M. Holmgreen; Matthew M. Yung; Jonathan Halter; Joel Hiltner

2005-12-21

A two-stage system for the catalytic reduction of NO from lean-burn natural gas reciprocating engine exhaust is investigated. Each of the two stages uses a distinct catalyst. The first stage is oxidation of NO to NO{sub 2} and the second stage is reduction of NO{sub 2} to N{sub 2} with a hydrocarbon. The central idea is that since NO{sub 2} is a more easily reduced species than NO, it should be better able to compete with oxygen for the combustion reaction of hydrocarbon, which is a challenge in lean conditions. Early work focused on demonstrating that the N{sub 2} yield obtained when NO{sub 2} was reduced was greater than when NO was reduced. NO{sub 2} reduction catalysts were designed and silver supported on alumina (Ag/Al{sub 2}O{sub 3}) was found to be quite active, able to achieve 95% N{sub 2} yield in 10% O{sub 2} using propane as the reducing agent. The design of a catalyst for NO oxidation was also investigated, and a Co/TiO{sub 2} catalyst prepared by sol-gel was shown to have high activity for the reaction, able to reach equilibrium conversion of 80% at 300 C at GHSV of 50,000h{sup -1}. After it was shown that NO{sub 2} could be more easily reduced to N{sub 2} than NO, the focus shifted on developing a catalyst that could use methane as the reducing agent. The Ag/Al{sub 2}O{sub 3} catalyst was tested and found to be inactive for NOx reduction with methane. Through iterative catalyst design, a palladium-based catalyst on a sulfated-zirconia support (Pd/SZ) was synthesized and shown to be able to selectively reduce NO{sub 2} in lean conditions using methane. Development of catalysts for the oxidation reaction also continued and higher activity, as well as stability in 10% water, was observed on a Co/ZrO{sub 2} catalyst, which reached equilibrium conversion of 94% at 250 C at the same GHSV. The Co/ZrO{sub 2} catalyst was also found to be extremely active for oxidation of CO, ethane, and propane, which could potential eliminate the need for any separate
40 CFR 62.15375 - What are the emission limits for air curtain incinerators that burn 100 percent yard waste?

Science.gov (United States)

2010-07-01

... curtain incinerators that burn 100 percent yard waste? 62.15375 Section 62.15375 Protection of Environment... Combustion Units Constructed on or Before August 30, 1999 Air Curtain Incinerators That Burn 100 Percent Yard Waste § 62.15375 What are the emission limits for air curtain incinerators that burn 100 percent yard...
40 CFR 62.15380 - How must I monitor opacity for air curtain incinerators that burn 100 percent yard waste?

Science.gov (United States)

2010-07-01

... curtain incinerators that burn 100 percent yard waste? 62.15380 Section 62.15380 Protection of Environment... Combustion Units Constructed on or Before August 30, 1999 Air Curtain Incinerators That Burn 100 Percent Yard Waste § 62.15380 How must I monitor opacity for air curtain incinerators that burn 100 percent yard...
40 CFR 60.1920 - What are the emission limits for air curtain incinerators that burn 100 percent yard waste?

Science.gov (United States)

2010-07-01

... curtain incinerators that burn 100 percent yard waste? 60.1920 Section 60.1920 Protection of Environment... or Before August 30, 1999 Model Rule-Air Curtain Incinerators That Burn 100 Percent Yard Waste § 60.1920 What are the emission limits for air curtain incinerators that burn 100 percent yard waste? If...
Bomb reduction of uranium tetrafluoride. Part II: Influence of the addition elements in the reduction process; Reduccion del tetrafluoruro de uranio en bomba cerrada. Parte II: Influencia de elementos de adicion en la reducion

Energy Technology Data Exchange (ETDEWEB)

Anca Abati, R; Lopez Rodriguez, M

1962-07-01

This work shows the influence of uranium oxide and uranyl fluoride in the reduction of uranium with Ca and Mg. These additions are more harmful when using smaller bombs. The uranyl fluoride has influence in the reduction process; the curves yield-concentration shows two regions depending upon the salt concentration. The behaviour of this addition in these regions can be explained following the different decompositions that can take place during the reduction process. (Author) 9 refs.
Technological yields of sources for radiation processing

International Nuclear Information System (INIS)

Zagorski, Z.P.

1990-01-01

The present report is prepared for planners of radiation processing of any material. Sources with cobalt-60 are treated marginally, because most probably, there will be no installation of technically meaningful activity in Poland before the year 2000. Calculations are focused on accelerators of electrons, divided into two groups: versatile linacs of energy up to 13 MeV and accelerators of lower energy, below 2 MeV, of better energetical yield but of limited applications. The calculations are connected with the confrontation of the author's technological expectations during the preparation of the linac project in the late '60s, with the results of twenty years of exploitation of the machine. One has to realize that from the 150 kV input power from the mains, only 5 kV of bent and scanned beam is recovered on the conveyor. That power is only partially used for radiation induced phenomena, sometimes only a few percent, because of the demanded homogeneity of the dose, of the mode of packing of the object and its shape, of losses at the edges of the scanned area and in the spaces between boxes, and of losses during the dead time due to the tuning of the machine and dosimetric operations. The use of lower energy accelerators may be more economical in case of objects of optimum type. At the first stage, that is of the conversion of electrical power into that of the low energy electron beam, the yield is 2-3 times better than in the case of linacs. Attention has been paid to the technological aspects of electron beam conversion into the more penetrating bremsstrahlung similar to gamma radiation. The advantages of these technologies, which make it possible to control the shape of the processed object are stressed. Ten parameters necessary for a proper calculation of technological yields of radiation processing are listed. Additional conditions which must be taken into account in the comparison of the cost of radiation processing with the cost of other technologies are also
Evaluation of the Effect of Different Irrigation Levels of Drip Irrigation (Tape on Yield and Yield Components of Corn

Directory of Open Access Journals (Sweden)

mohammad karimi

2016-02-01

irrigation water in drip tape systems in one and two rows planting patterns with different plant densities. The experiment was conducted on randomized complete blocks as a split plot (Split block design with 3 replicates in the Qazvin region. Four levels of irrigation including: 80, 100 and 120 percent of water requirement with drip irrigation (tape and 100% water requirement with furrow irrigation (control treatment as main plots and method of planting (one and two rows with three levels of crop density including: 75000, 90000 and 105000 as subplots were considered. After harvesting, grain yield, number of rows per ear, number of kernels per ear row, number of grains per ear and 1000-kernel weigh were measured. Results and Discussion: The results of simple variance analysis of attributes showed that the method of planting has a significant difference on the level of 5% for grain yield, but on the other the measured attributes did not have any significant effect. The respective effect of planting method and crop density showed a significant difference on the level of 5% for grain yield, number of kernels per ear and the 1000-grain weight, whereas it did not have any significant effect on the other measured attributes. The respective effects of irrigation method, planting method and crop density showed a significant difference on the level of 1% for the attributes of the number of kernels per ear. The planting in one row resulted in significantly higher grain yields than the other planting patterns. In mean comparisons of the interactions between irrigation methods, crop density and planting method, grain yield in drip irrigation at a level of 120% water requirement in the two rows planting pattern and crop density equal to 75000 plants was shown in the lead on the level of 10%. The results showed that the yields of the treatments were only affected by the method of planting and planting of one row lead the planting of two rows. According to means comparison and water use

Sulfate Reduction Remediation of a Metals Plume Through Organic Injection

International Nuclear Information System (INIS)

Phifer, M.A.

2003-01-01

Laboratory testing and a field-scale demonstration for the sulfate reduction remediation of an acidic/metals/sulfate groundwater plume at the Savannah River Site has been conducted. The laboratory testing consisted of the use of anaerobic microcosms to test the viability of three organic substrates to promote microbially mediated sulfate reduction. Based upon the laboratory testing, soybean oil and sodium lactate were selected for injection during the subsequent field-scale demonstration. The field-scale demonstration is currently ongoing. Approximately 825 gallons (3,123 L) of soybean oil and 225 gallons (852 L) of 60 percent sodium lactate have been injected into an existing well system within the plume. Since the injections, sulfate concentrations in the injection zone have significantly decreased, sulfate-reducing bacteria concentrations have significantly increased, the pH has increased, the Eh has decreased, and the concentrations of many metals have decreased. Microbially mediated sulfate reduction has been successfully promoted for the remediation of the acidic/metals/sulfate plume by the injection of soybean oil and sodium lactate within the plume
CRED Cumulative Map of Percent Scleractinian Coral Cover at Kure Atoll, 2002-2004

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This map displays optical validation observation locations and percent coverage of scleractinian coral overlaid on bathymetry.
CRED Cumulative Map of Percent Scleractinian Coral Cover at Laysan Island, 2002-2004

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This map displays optical validation observation locations and percent coverage of scleractinian coral overlaid on bathymetry.
CRED Cumulative Map of Percent Scleractinian Coral Cover at Palmyra Atoll, 2002-2004

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This map displays optical validation observation locations and percent coverage of scleractinian coral overlaid on bathymetry.
CRED Cumulative Map of Percent Scleractinian Coral Cover at Lisianski Island, 2001-2004

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This map displays optical validation observation locations and percent coverage of scleractinian coral overlaid on bathymetry.
CRED Cumulative Map of Percent Scleractinian Coral Cover at Maro Reef, 2001-2004

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This map displays optical validation observation locations and percent coverage of scleractinian coral overlaid on bathymetry.
CRED Cumulative Map of Percent Scleractinian Coral Cover at Baker Island, 2002-2004

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This map displays optical validation observation locations and percent coverage of scleractinian coral overlaid on bathymetry.
Central subspace dimensionality reduction using covariance operators.

Science.gov (United States)

Kim, Minyoung; Pavlovic, Vladimir

2011-04-01

We consider the task of dimensionality reduction informed by real-valued multivariate labels. The problem is often treated as Dimensionality Reduction for Regression (DRR), whose goal is to find a low-dimensional representation, the central subspace, of the input data that preserves the statistical correlation with the targets. A class of DRR methods exploits the notion of inverse regression (IR) to discover central subspaces. Whereas most existing IR techniques rely on explicit output space slicing, we propose a novel method called the Covariance Operator Inverse Regression (COIR) that generalizes IR to nonlinear input/output spaces without explicit target slicing. COIR's unique properties make DRR applicable to problem domains with high-dimensional output data corrupted by potentially significant amounts of noise. Unlike recent kernel dimensionality reduction methods that employ iterative nonconvex optimization, COIR yields a closed-form solution. We also establish the link between COIR, other DRR techniques, and popular supervised dimensionality reduction methods, including canonical correlation analysis and linear discriminant analysis. We then extend COIR to semi-supervised settings where many of the input points lack their labels. We demonstrate the benefits of COIR on several important regression problems in both fully supervised and semi-supervised settings.
The induced dimension reduction method applied to convection-diffusion-reaction problems

NARCIS (Netherlands)

Astudillo Rengifo, R.A.; van Gijzen, M.B.

2016-01-01

Discretization of (linearized) convection-diusion-reaction problems yields
a large and sparse non symmetric linear system of equations,
Ax = b: (1)
In this work, we compare the computational behavior of the Induced Dimension
Reduction method (IDR(s)) [10], with other
SOIL N, P AND K CONCENTRATIONS AND RICE YIELD INCREASED DUE TO THE APPLICATION OF Azolla pinnata

Directory of Open Access Journals (Sweden)

A. Arivin Rivaie*

2014-01-01

Full Text Available Many studies showed that application of Azolla pinnata as biofertilizer improved soil fertility some agricultural crops, including rice, whereas farmers in Lampung consider that A. pinnata suppresses growth of rice seedlings, so they throw it field by raising irrigation water surface. Information on effects A. pinnata application on changes in nutrient availability and rice yield obtained from paddy fields of regions still rare. A study was carried out to investigate effects of different rates of A. pinnata on changes in N, P, K concentrations in paddy soils, N uptake, and rice yield. A well-irrigated paddy field was incorporated with A. pinnata, and then rice seedlings of Ciherang variety had been grown from June up to December 2009. Results: application of A. pinnata at dose of five t per ha increased concentration of N, P and K as well as rice yield. A. pinnata had a relatively high N content, ie 2.43 percent. Application of A. pinnata of 7.5 t per ha increased significantly available soil P, indicated that A. pinnata requires a fairly high P to grow optimally. Application of A. pinnata of 7.5 t per ha gave highest dry grain yield, suggests that application A. pinnata did not suppress rice yield, even use of A. pinnata as organic matter source will help to conserve fossil fuels and foreign exchange as well as will allow more paddy fields that can be fertilized by N.
Does One Know the Properties of a MICE Solid or Liquid Absorber to Better than 0.3 Percent?

International Nuclear Information System (INIS)

Green, Michael A.; Yang, Stephanie Q.

2006-01-01

This report discusses the report discusses whether the MICE absorbers can be characterized to ±0.3 percent, so that one predict absorber ionization cooling within the absorber. This report shows that most solid absorbers can be characterized to much better than ±0.3 percent. The two issues that dominate the characterization of the liquid cryogen absorbers are the dimensions of the liquid in the vessel and the density of the cryogenic liquid. The thickness of the window also plays a role. This report will show that a liquid hydrogen absorber can be characterized to better than ±0.3 percent, but a liquid helium absorber cannot be characterized to better and ±1 percent
How Accurately Do Maize Crop Models Simulate the Interactions of Atmospheric CO2 Concentration Levels With Limited Water Supply on Water Use and Yield?

Science.gov (United States)

Durand, Jean-Louis; Delusca, Kenel; Boote, Ken; Lizaso, Jon; Manderscheid, Remy; Weigel, Hans Johachim; Ruane, Alexander Clark; Rosenzweig, Cynthia E.; Jones, Jim; Ahuja, Laj;

2017-01-01

This study assesses the ability of 21 crop models to capture the impact of elevated CO2 concentration [CO2] on maize yield and water use as measured in a 2-year Free Air Carbon dioxide Enrichment experiment conducted at the Thunen Institute in Braunschweig, Germany (Manderscheid et al. 2014). Data for ambient [CO2] and irrigated treatments were provided to the 21 models for calibrating plant traits, including weather, soil and management data as well as yield, grain number, above ground biomass, leaf area index, nitrogen concentration in biomass and grain, water use and soil water content. Models differed in their representation of carbon assimilation and evapotranspiration processes. The models reproduced the absence of yield response to elevated [CO2] under well-watered conditions, as well as the impact of water deficit at ambient [CO2], with 50 percent of models within a range of plus/minus 1 Mg ha(exp. -1) around the mean. The bias of the median of the 21 models was less than 1 Mg ha(exp. -1). However under water deficit in one of the two years, the models captured only 30 percent of the exceptionally high [CO2] enhancement on yield observed. Furthermore the ensemble of models was unable to simulate the very low soil water content at anthesis and the increase of soil water and grain number brought about by the elevated [CO2] under dry conditions. Overall, we found models with explicit stomatal control on transpiration tended to perform better. Our results highlight the need for model improvement with respect to simulating transpirational water use and its impact on water status during the kernel-set phase.

40 CFR 60.1450 - How must I monitor opacity for air curtain incinerators that burn 100 percent yard waste?

Science.gov (United States)

2010-07-01

... curtain incinerators that burn 100 percent yard waste? 60.1450 Section 60.1450 Protection of Environment... Air Curtain Incinerators That Burn 100 Percent Yard Waste § 60.1450 How must I monitor opacity for air curtain incinerators that burn 100 percent yard waste? (a) Use EPA Reference Method 9 in appendix A of...
40 CFR 60.1925 - How must I monitor opacity for air curtain incinerators that burn 100 percent yard waste?

Science.gov (United States)

2010-07-01

... curtain incinerators that burn 100 percent yard waste? 60.1925 Section 60.1925 Protection of Environment... or Before August 30, 1999 Model Rule-Air Curtain Incinerators That Burn 100 Percent Yard Waste § 60.1925 How must I monitor opacity for air curtain incinerators that burn 100 percent yard waste? (a) Use...
Biochemical and anatomical changes and yield reduction in rice (Oryza sativa L.) under varied salinity regimes.

Science.gov (United States)

Hakim, M A; Juraimi, Abdul Shukor; Hanafi, M M; Ismail, Mohd Razi; Selamat, Ahmad; Rafii, M Y; Latif, M A

2014-01-01

Five Malaysian rice (Oryza sativa L.) varieties, MR33, MR52, MR211, MR219, and MR232, were tested in pot culture under different salinity regimes for biochemical response, physiological activity, and grain yield. Three different levels of salt stresses, namely, 4, 8, and 12 dS m(-1), were used in a randomized complete block design with four replications under glass house conditions. The results revealed that the chlorophyll content, proline, sugar content, soluble protein, free amino acid, and yield per plant of all the genotypes were influenced by different salinity levels. The chlorophyll content was observed to decrease with salinity level but the proline increased with salinity levels in all varieties. Reducing sugar and total sugar increased up to 8 dS m(-1) and decreased up to 12 dS m(-1). Nonreducing sugar decreased with increasing the salinity levels in all varieties. Soluble protein and free amino acid also decreased with increasing salinity levels. Cortical cells of MR211 and MR232 did not show cell collapse up to 8 dS m(-1) salinity levels compared to susceptible checks (IR20 and BRRI dhan29). Therefore, considering all parameters, MR211 and MR232 showed better salinity tolerance among the tested varieties. Both cluster and principal component analyses depict the similar results.
Biochemical and Anatomical Changes and Yield Reduction in Rice (Oryza sativa L. under Varied Salinity Regimes

Directory of Open Access Journals (Sweden)

M. A. Hakim

2014-01-01

Full Text Available Five Malaysian rice (Oryza sativa L. varieties, MR33, MR52, MR211, MR219, and MR232, were tested in pot culture under different salinity regimes for biochemical response, physiological activity, and grain yield. Three different levels of salt stresses, namely, 4, 8, and 12 dS m−1, were used in a randomized complete block design with four replications under glass house conditions. The results revealed that the chlorophyll content, proline, sugar content, soluble protein, free amino acid, and yield per plant of all the genotypes were influenced by different salinity levels. The chlorophyll content was observed to decrease with salinity level but the proline increased with salinity levels in all varieties. Reducing sugar and total sugar increased up to 8 dS m−1 and decreased up to 12 dS m−1. Nonreducing sugar decreased with increasing the salinity levels in all varieties. Soluble protein and free amino acid also decreased with increasing salinity levels. Cortical cells of MR211 and MR232 did not show cell collapse up to 8 dS m−1 salinity levels compared to susceptible checks (IR20 and BRRI dhan29. Therefore, considering all parameters, MR211 and MR232 showed better salinity tolerance among the tested varieties. Both cluster and principal component analyses depict the similar results.
The economic payoff for global warming emissions reduction

International Nuclear Information System (INIS)

Shelton, Sam V.; Schaefer, Laura A.

1999-01-01

In order to meet the 1997 Kyoto treaty targets, U.S. carbon emissions must be severely curtailed. While top-down economic models predict that cutting carbon emissions will produce high costs, higher efficiency technology, such as residential electric heat pump water heaters, can cause carbon reduction to become profitable. In a single-family residence, replacing an electric resistance water heater with a heat pump water heater can reduce carbon emissions by 0.6 tons per year and produce savings of $1200 over a twelve-year period., rather than costs. National implementation of this single technology would reduce electric power plant carbon emissions by 5 percent. (Author)
Effect of nitrogen fertilizer application timing on nitrogen use efficiency and grain yield of winter wheat in Ireland

Directory of Open Access Journals (Sweden)

Efretuei A.

2016-06-01

Full Text Available The objectives of this work were to determine the effects of initiating application of fertilizer nitrogen (N to winter wheat at different growth stages (GSs on grain yield and N use efficiency (NUE. A factorial experiment was carried out in two growing seasons (2011 and 2012 with five timings of first N application (GS 24/26 [tillering], GS 30, GS 31, GS 32 or GS 37 and an unfertilized control, two sowing densities (100 and 400 seeds/m2 and a cattle slurry treatment (with or without slurry. The latter was included to simulate variation in soil N supply (SNS. Delaying the first application of N from the tillering stage until GS 30 had no significant effect on grain yield in either year. Further delaying the initial N application until GS 31 caused a significant yield reduction in 2011, in comparison to GS 30 application, but not in 2012. Differences in efficiency of recovery and use of fertilizer N by the crop among the first three application timings were small. There was no evidence to support alteration in the timing of the first application of N in response to low plant density. Slurry application did not influence SNS, so the interaction between SNS and fertilizer N application timing could not be determined. It is concluded that in order to maximise yield and NUE, the first N application should be applied to winter wheat between late tillering and GS 30 and that delaying the first N until GS 31 can lead to yield reductions compared to the yield obtained with earlier application.
The Effect of Different Fertilizer Management on Yield and Yield Components of Black Seed (Nigella sativa L.

Directory of Open Access Journals (Sweden)

P rezvani moghaddam

2017-08-01

Full Text Available Introduction Given the importance of nitrogen for improving the quantitative and qualitative yield of crops (Rodrigues et al., 2006 and the need for application of chemical fertilizers in intensive agriculture to get the maximum production, nitrogen supply in adequate amounts by ecologically avowed resources is known as one of the main challenges during transition from conventional to organic farming (Rodrigues et al., 2006. Considering the sustainable nitrogen management, reconstruction and rehabilitation of agroecosystems depends on reduction the nitrogen losses due to leaching, soil erosion and volatilization (Kizilkaya, 2008. For this purpose, the use of eco-friendly bio based fertilizers that are derived from natural origin, known as effective and enforceable approaches. In this regards, the proper use of manure and free-living aerobic bacteria of soils, such as Azotobacter and Azospirillum as well as mycorrhizal inoculation which can be used as a biological fertilizers, can particularly be considered (Kizilkaya, 2008. With regard to all mentioned above, the current study was aimed to evaluate the effects of biological, organic and inorganic resources of nitrogen on yield and yield components of black seed (Nigella sativa L.. Materials and methods The field experiment was conducted at Faculty of Agriculture, Ferdowsi University of Mashhad, Iran, in years of 2009-2010. Experimental site was located in a semi-arid region, Khorasan Province, Northeast of Iran. The soil texture was silty loam, pH 8.36, electrical conductivity 3.72 dS.m-1, total N 0.095% and 0.195% organic carbon. The available P and K contents were 5.76 and 0.378 ppm, respectively. Experimental design was arranged by using a completely randomized block design with three replications. Experimental treatments included chemical fertilizer (urea, urea + nitroxin, urea + mycorrhizae, urea + nitroxin + mycorrhizae, urea + biosulfur, manure, manure + nitroxin, manure + mycorrhizae
Bond yield curve construction

Directory of Open Access Journals (Sweden)

Kožul Nataša

2014-01-01

Full Text Available In the broadest sense, yield curve indicates the market's view of the evolution of interest rates over time. However, given that cost of borrowing it closely linked to creditworthiness (ability to repay, different yield curves will apply to different currencies, market sectors, or even individual issuers. As government borrowing is indicative of interest rate levels available to other market players in a particular country, and considering that bond issuance still remains the dominant form of sovereign debt, this paper describes yield curve construction using bonds. The relationship between zero-coupon yield, par yield and yield to maturity is given and their usage in determining curve discount factors is described. Their usage in deriving forward rates and pricing related derivative instruments is also discussed.

Low LET radiolysis escape yields for reducing radicals and H2 in pressurized high temperature water

Science.gov (United States)

Sterniczuk, Marcin; Yakabuskie, Pamela A.; Wren, J. Clara; Jacob, Jasmine A.; Bartels, David M.

2016-04-01

Low Linear Energy Transfer (LET) radiolysis escape yields (G values) are reported for the sum (G(radH)+G(e-)aq) and for G(H2) in subcritical water up to 350 °C. The scavenger system 1-10 mM acetate/0.001 M hydroxide/0.00048 M N2O was used with simultaneous mass spectroscopic detection of H2 and N2 product. Temperature-dependent measurements were carried out with 2.5 MeV electrons from a van de Graaff accelerator, while room temperature calibration measurements were done with a 60Co gamma source. The concentrations and dose range were carefully chosen so that initial spur chemistry is not perturbed and the N2 product yield corresponds to those reducing radicals that escape recombination in pure water. In comparison with a recent review recommendation of Elliot and Bartels (AECL report 153-127160-450-001, 2009), the measured reducing radical yield is seven percent smaller at room temperature but in fairly good agreement above 150 °C. The H2 escape yield is in good agreement throughout the temperature range with several previous studies that used much larger radical scavenging rates. Previous analysis of earlier high temperature measurements of Gesc(radOH) is shown to be flawed, although the actual G values may be nearly correct. The methodology used in the present report greatly reduces the range of possible error and puts the high temperature escape yields for low-LET radiation on a much firmer quantitative foundation than was previously available.
Wastewater impact on physiology, biomass and yield of canola (brassica napus L.)

International Nuclear Information System (INIS)

Khan, I.U.; Khan, M.J.

2012-01-01

The impact of domestic/municipal wastewater (mww) of Dera Ismail Khan, Pakistan was assessed through its effects on biomass, physiology and yield of canola (Brassica napus L.). The pot experiments were conducted in a completely randomized design with three replications in net house during winter season 2006-07 and 2007-08 at Gomal University, Dera Ismail Khan, Pakistan. Treatments included were T0 (tube well/tap water), T/sub 1/ (20% mww), T/sub 2/ (40% mww), T/sub 3/ (80% mww) and T/sub 4/ (100% mww/raw-form municipal wastewater). The quality and chemical composition of wastewater was deviating from international (Anon., 1985) as well as NEQS (2005) standard. Analysis of wastewater showed that biochemical oxygen demand (BOD), chemical oxygen demand (COD), sodium adsorption ratio (SAR) and total suspended solids (TSS) were above the permissible limit of irrigation. In pods per plant, the reduction was 61.55% by recording 110 pods per plant with T/sub 4/ (100% mww) as compared to control T0 (286.1 pods per plant). Similarly pod length (reduced by 59.72%), seeds per pod (reduced by 42.53%), Seeds per plant (reduced by 82%), seed weight per plant (reduced by 88%), 100-seed weight (reduced by 19.54%) and straw yield (reduced by 54.23%) were significantly reduced by applying 100% wastewater. The most affected yield contributing traits were seeds per plant and seed weight per plant with 82% and 88% reduction, respectively due to T/sub 4/ (100% mww). On average, the decrease was 60% in the first stage and a further decrement of 4.83% was observed when the obtained seeds were re-sown in 2007-08. Results revealed that utilizing municipal wastewater of the area under investigation for irrigation purpose of food and feed crops might not be safe. The major reason seems to be the high salinity and sodium adsorption ratio that restricted crop growth and yield. (author)
Making biodiversity-friendly cocoa pay: combining yield, certification, and REDD for shade management.

Science.gov (United States)

Waldron, A; Justicia, R; Smith, L E

2015-03-01

The twin United Nations' Millennium Development Goals of biodiversity preservation and poverty reduction both strongly depend on actions in the tropics. In particular, traditional agroforestry could be critical to both biological conservation and human livelihoods in human-altered rainforest areas. However, traditional agroforestry is rapidly disappearing, because the system itself is economically precarious, and because the forest trees that shade traditional crops are now perceived to be overly detrimental to agricultural yield. Here, we show a case where the commonly used agroforestry shade metric, canopy cover, would indeed suggest complete removal of shade trees to maximize yield, with strongly negative biodiversity and climate implications. However, a yield over 50% higher was achievable if approximately 100 shade trees per hectare were planted in a spatially organized fashion, a win-win for biodiversity and the smallholder. The higher yield option was detected by optimizing simultaneously for canopy cover, and a second shade metric, neighboring tree density, which was designed to better capture the yield value of ecological services flowing from forest trees. Nevertheless, even a 50% yield increase may prove insufficient to stop farmers converting away from traditional agroforestry. To further increase agroforestry rents, we apply our results to the design of a sustainable certification (eco-labelling) scheme for cocoa-based products in a biodiversity hotspot, and consider their implications for the use of the United Nations REDD (reducing emissions from deforestation and forest degradation) program in agroforestry systems. Combining yield boost, certification, and REDD has the potential to incentivize eco-friendly agroforestry and lift smallholders out of poverty, simultaneously.
TEM investigation of irradiated U-7 weight percent Mo dispersion fuel

International Nuclear Information System (INIS)

Van den Berghe, S.

2009-01-01

In the FUTURE experiment, fuel plates containing U-7 weight percent Mo atomized powder were irradiated in the BR2 reactor. At a burn-up of approximately 33 percent 235 U (6.5 percent FIMA or 1.41 10 21 fissions/cm 3 meat), the fuel plates showed an important deformation and the irradiation was stopped. The plates were submitted to detailed PIE at the Laboratory for High and Medium level Activity. The results of these examinations were reported in the scientific report of last year and published in open literature. Since then, the microstructural aspects of the FUTURE fuel were studied in more detail using transmission electron microscopy (TEM), in an attempt to understand the nature of the interaction phase and the fission gas behavior in the atomized U(Mo) fuel. The FUTURE experiment is regarded as the definitive proof that the classical atomized U(Mo) dispersion fuel is not stable under irradiation, at least in the conditions required for normal operation of plate-type fuel. The main cause for the instability was identified to be the irradiation behavior of the U(Mo)-Al interaction phase which is formed between the U(Mo) particles and the pure aluminum matrix during irradiation. It is assumed to become amorphous under irradiation and as such cannot retain the fission gas in stable bubbles. As a consequence, gas filled voids are generated between the interaction layer and the matrix, resulting in fuel plate pillowing and failure. The objective of the TEM investigation was the confirmation of this assumption of the amorphisation of the interaction phase. A deeper understanding of the actual nature of this layer and the fission gas behaviour in these fuels in general can allow a more oriented search for a solution to the fuel failures
7755 EFFECT OF NPK FERTILIZER ON FRUIT YIELD AND YIELD ...

African Journals Online (AJOL)

Win7Ent

2013-06-03

Jun 3, 2013 ... peasant farmers in Nigeria. With the increased ... did not significantly (p=0.05) increase the fruit yield nor the seed yield. Key words: NPK fertilizer, Fruit ..... SAS (Statistical Analysis System) Version 9.1. SAS Institute Inc., Cary, ...
Scaling Properties of Dimensionality Reduction for Neural Populations and Network Models.

Directory of Open Access Journals (Sweden)

Ryan C Williamson

2016-12-01

Full Text Available Recent studies have applied dimensionality reduction methods to understand how the multi-dimensional structure of neural population activity gives rise to brain function. It is unclear, however, how the results obtained from dimensionality reduction generalize to recordings with larger numbers of neurons and trials or how these results relate to the underlying network structure. We address these questions by applying factor analysis to recordings in the visual cortex of non-human primates and to spiking network models that self-generate irregular activity through a balance of excitation and inhibition. We compared the scaling trends of two key outputs of dimensionality reduction-shared dimensionality and percent shared variance-with neuron and trial count. We found that the scaling properties of networks with non-clustered and clustered connectivity differed, and that the in vivo recordings were more consistent with the clustered network. Furthermore, recordings from tens of neurons were sufficient to identify the dominant modes of shared variability that generalize to larger portions of the network. These findings can help guide the interpretation of dimensionality reduction outputs in regimes of limited neuron and trial sampling and help relate these outputs to the underlying network structure.
Decontamination and size reduction of plutonium contaminated process exhaust ductwork and glove boxes

International Nuclear Information System (INIS)

LaFrate, P.; Elliott, J.; Valasquez, M.

1996-01-01

The Los Alamos National Laboratory (LANL) Decommissioning Program has decontaminated and demolished two filter plenum buildings at Technical Area 21 (TA-21). During the project a former hot cell was retrofitted to perform decontamination and size reduction of highly Pu contaminated process exhaust (1,100 ft) and gloveboxes. Pu-238/239 concentrations were as high a 1 Ci per linear foot and averaged approximately 1 mCi/ft. The Project decontamination objective was to reduce the plutonium contamination on surfaces below transuranic levels. If possible, metal surfaces were decontaminated further to meet Science and Ecology Group (SEG) waste classification guidelines to enable the metal to be recycled at their facility in oak Ridge, Tennessee. Project surface contamination acceptance criteria for low-level radioactive waste (LLRW), transuranic waste, and SEG waste acceptance criteria will be presented. Ninety percent of all radioactive waste for the project was characterized as LLRW. Twenty percent of this material was shipped to SEG. Process exhaust and glove boxes were brought to the project decontamination area, an old hot cell in Building 4 North. This paper focuses on process exhaust and glovebox decontamination methodology, size reduction techniques, waste characterization, airborne contamination monitoring, engineering controls, worker protection, lessons learned, and waste minimization. Decontamination objectives are discussed in detail
Influence of sowing dates on phenological development and yield of dual purpose wheat cultivars

International Nuclear Information System (INIS)

Munsif, F.; Arif, M.; Ali, K.

2015-01-01

Dual-purpose wheat is getting recognition among community in diverse farming systems. Success of the system depends on management decisions regarding appropriate sowing dates, choice of cultivars, harvesting time and stage. A comprehensive understanding of how these factors influence the growth and phenology of dual purpose wheat is needed for comparison of grain only wheat to dual purpose system to feed the ever increasing population under this system. The existing higher yielding varieties (Saleem-2000, Bathoor-2007, Fakhre Sarhad-99, Uqab-2000, Siran-2008, and Ghaznavi-98) of wheat were sown on various planting dates from early to normal (15th, 30th October and 14th November) and were given cut after 70 days of sowing. The experiment was arranged in randomized complete block design having split plot arrangement with three replications. Results of the study indicated that booting, heading and physiological maturity were significantly influenced by planting dates, among the cultivars and cutting imposed 70 days after sowing. Mid October sowing prolonged booting, heading, anthesis, maturity and had long stature plants and higher grain yield than sowing in mid November. Uqab-2000 booted, headed and reached to anthesis and maturity earlier followed by Ghaznavi-98, Bathoor-2007 and Saleem-2000. Uqab-2000 and Siran-2008 had higher grain yield than other cultivars. Booting, heading, anthesis and maturity were significantly delayed in cutting as compared to no cut plots. Wheat varieties Bathoor-2007, Uqab-2000 and Fakhre Sarhad-99 produced taller plants compared to Saleem-2000. It is concluded that early sowing on mid October had prolonged phenological traits and higher yield of wheat with long stature plants than later sowing (15th November) and variety Fakhre Sarhad-99 unlike Uqab-2000 was late with respect to phenological development. Cutting prior to stem elongation had not delayed the maturity from three days without substantial yield reduction which revealed that
Is current irrigation sustainable in the United States? An integrated assessment of climate change impact on water resources and irrigated crop yields

Science.gov (United States)

Blanc, Elodie; Caron, Justin; Fant, Charles; Monier, Erwan

2017-08-01

While climate change impacts on crop yields has been extensively studied, estimating the impact of water shortages on irrigated crop yields is challenging because the water resources management system is complex. To investigate this issue, we integrate a crop yield reduction module and a water resources model into the MIT Integrated Global System Modeling framework, an integrated assessment model linking a global economic model to an Earth system model. We assess the effects of climate and socioeconomic changes on water availability for irrigation in the U.S. as well as subsequent impacts on crop yields by 2050, while accounting for climate change projection uncertainty. We find that climate and socioeconomic changes will increase water shortages and strongly reduce irrigated yields for specific crops (i.e., cotton and forage), or in specific regions (i.e., the Southwest) where irrigation is not sustainable. Crop modeling studies that do not represent changes in irrigation availability can thus be misleading. Yet, since the most water-stressed basins represent a relatively small share of U.S. irrigated areas, the overall reduction in U.S. crop yields is small. The response of crop yields to climate change and water stress also suggests that some level of adaptation will be feasible, like relocating croplands to regions with sustainable irrigation or switching to less irrigation intensive crops. Finally, additional simulations show that greenhouse gas (GHG) mitigation can alleviate the effect of water stress on irrigated crop yields, enough to offset the reduced CO2 fertilization effect compared to an unconstrained GHG emission scenario.
Yielding physically-interpretable emulators - A Sparse PCA approach

Science.gov (United States)

Galelli, S.; Alsahaf, A.; Giuliani, M.; Castelletti, A.

2015-12-01

Projection-based techniques, such as Principal Orthogonal Decomposition (POD), are a common approach to surrogate high-fidelity process-based models by lower order dynamic emulators. With POD, the dimensionality reduction is achieved by using observations, or 'snapshots' - generated with the high-fidelity model -, to project the entire set of input and state variables of this model onto a smaller set of basis functions that account for most of the variability in the data. While reduction efficiency and variance control of POD techniques are usually very high, the resulting emulators are structurally highly complex and can hardly be given a physically meaningful interpretation as each basis is a projection of the entire set of inputs and states. In this work, we propose a novel approach based on Sparse Principal Component Analysis (SPCA) that combines the several assets of POD methods with the potential for ex-post interpretation of the emulator structure. SPCA reduces the number of non-zero coefficients in the basis functions by identifying a sparse matrix of coefficients. While the resulting set of basis functions may retain less variance of the snapshots, the presence of a few non-zero coefficients assists in the interpretation of the underlying physical processes. The SPCA approach is tested on the reduction of a 1D hydro-ecological model (DYRESM-CAEDYM) used to describe the main ecological and hydrodynamic processes in Tono Dam, Japan. An experimental comparison against a standard POD approach shows that SPCA achieves the same accuracy in emulating a given output variable - for the same level of dimensionality reduction - while yielding better insights of the main process dynamics.
Colored plastic mulch microclimates affect strawberry fruit yield and quality.

Science.gov (United States)

Shiukhy, Saeid; Raeini-Sarjaz, Mahmoud; Chalavi, Vida

2015-08-01

Significant reduction of strawberry (Fragaria × ananassa, Duch.) fruit yield and quality, as a consequence of conventional cultivation method, is common in the Caspian Sea region, Iran. Recently, growers started using plastic mulches to overcome these shortcomings. Plastic mulches have different thermal and radiation properties and could affect strawberry fruit yield and quality. In the present study, the effect of different colored plastic mulches (black, red, and white) along with conventional practice was tested on yield and quality of strawberry Camarosa cultivar, in a completely randomized block design. Colored plastic mulches had highly significant effect on fruit weight, size, and phytochemical contents. In the most harvest times, mean fruit weight was significantly higher in red plastic relative to white and control treatments. Total fruit weight of plastic mulches was not significantly different, while all were statistically higher than that of control. Fruit size significantly increased over red plastic mulch. Total fruit numbers over plastic mulches were significantly higher than that of control treatment. The content of phenolic compounds was similar between treatments, while anthocyanin content, IC(50) value, and flavonoid content significantly were affected by colored plastics. In conclusion, colored plastic mulches could affect strawberry fruit weight and quality through altering strawberry thermal and radiation environment.
Grain Yield and Water Use Efficiency of Five Sorghum Cultivars under Different Irrigation Regimes in Kerman

Directory of Open Access Journals (Sweden)

H Vahidi

2016-02-01

Full Text Available Introduction Reduction of the forage and grain yield of sorghum genotypes under different levels of deficit irrigation has been reported. The plants that have higher water use efficiency (WUE, have a better chance of survival in arid regions. On average, WUE of sorghum in clay, loamy soil has been reported equal to 1.46 kg m-3. Effects of drought stress and different levels of nitrogen on yield of two cultivars of sorghum were investigated and results showed significant effects on plant height, leaf area index, fresh and dry weight of leaf, dry weight of stem and forage yield. The purpose of this research is to investigate the effect of deficit irrigation on grain yield and WUE of sorghum cultivars in Kerman. Materials and Methods This study has been conducted in the research station of Shahid Bahonar University of Kerman with 56o 58' E longitude, 30o 15' N latitude and 1753.8 altitudes. According to the regional information from 1952 to 2005, the average temperature is 17.1 oC, the average rainfall is 154.1 mm, the average annual relative humidity is 32%. The climate of Kerman according to De Martonne method can be classified as semiarid. The experimental design was split-plot based on RCBD with three replications. Three levels of irrigation (after 50, 80 and 110 mm evaporation from class A pan were assigned to the main plots and the five sub-plots of sorghum cultivars (Speedfeed, Pegah, Payam, Sepideh and Kimia. On the 20th of May all sorghum cultivars were planted at the distance of 10 cm from each other on ridges. On the 7th of October, with considering margins, four square meters of the two middle lines were selected to determine the grain and biological yield. The samples were weighed with a digital scale and heated for 48 hours in the degree of 75 oC-and then the dry weight of each samples were measured again. Finally, the data were analyzed by SAS software (v. 9.1. Comparision of the averages attributes was performed using, Duncan�
Exploring a suitable nitrogen fertilizer rate to reduce greenhouse gas emissions and ensure rice yields in paddy fields

Energy Technology Data Exchange (ETDEWEB)

Zhong, Yiming; Wang, Xiaopeng; Yang, Jingping, E-mail: jpyang@zju.edu.cn; Zhao, Xing; Ye, Xinyi

2016-09-15

The application rate of nitrogen fertilizer was believed to dramatically influence greenhouse gas (GHG) emissions from paddy fields. Thus, providing a suitable nitrogen fertilization rate to ensure rice yields, reducing GHG emissions and exploring emission behavior are important issues for field management. In this paper, a two year experiment with six rates (0, 75, 150, 225, 300, 375 kg N/ha) of nitrogen fertilizer application was designed to examine GHG emissions by measuring carbon dioxide (CO{sub 2}), methane (CH{sub 4}), nitrous oxide (N{sub 2}O) flux and their cumulative global warming potential (GWP) from paddy fields in Hangzhou, Zhejiang in 2013 and 2014. The results indicated that the GWP and rice yields increased with an increasing application rate of nitrogen fertilizer. Emission peaks of CH{sub 4} mainly appeared at the vegetative phase, and emission peaks of CO{sub 2}, and N{sub 2}O mainly appeared at reproductive phase of rice growth. The CO{sub 2} flux was significantly correlated with soil temperature, while the CH{sub 4} flux was influenced by logging water remaining period and N{sub 2}O flux was significantly associated with nitrogen application rates. This study showed that 225 kg N/ha was a suitable nitrogen fertilizer rate to minimize GHG emissions with low yield-scaled emissions of 3.69 (in 2013) and 2.23 (in 2014) kg CO{sub 2}-eq/kg rice yield as well as to ensure rice yields remained at a relatively high level of 8.89 t/ha in paddy fields. - Highlights: • Exploiting co-benefits of rice yield and reduction of greenhouse gas emission. • Global warming potential and rice yield increased with nitrogen fertilizer rate up. • Emission peaks of CH{sub 4,} CO{sub 2} and N{sub 2}O appeared at vegetative and reproductive phase. • 225 kg N/ha rate benefits both rice yields and GWP reduction.
Nitrogen fixation in Leucaena leucocephala and effects of pruning s on cereal yields

International Nuclear Information System (INIS)

Bekunda, M.

1998-01-01

Leucaena leucocephala was interplanted with reference tree species, Cassia siamea and Cassia spectabilis, and estimates of percent N derived from N 2 fixation (%Ndfa) were made, by the isotope-dilution method, at 4, 6, 14, 20 and 30 months after transplanting. The %Ndfa values were low and variable throughout the growth period, except after thinning at 14 months when there was a five-fold increase. The two non-fixing reference species outperformed the N 2 -fixing Leucaena in above-ground vegetative production, and provided different fixed-N estimates. Prunings from the L. leucocephala and C. Siamea trees were applied separately to soil as green manure. Maize was planted to test the effects of the Leucaena green manure on soil fertility, and millet was the test crop for the Cassia. Whether surface-applied or incorporated, the prunings significantly improved yields, which were generally similar among rates and methods of application. The proportions of cereal N obtained from prunings ranged from 8 to 33%, with no cereal-yield correlation. The data indicate that multipurpose tree prunings are of potential use to farmers as organic sources of nutrients, even at relatively low application rates, without need for incorporation into the soil. (author)
Use of almond shell and almond hull as substrates for sweet pepper cultivation. Effects on fruit yield and mineral content

Energy Technology Data Exchange (ETDEWEB)

Valverde, M.; Madrid, R.; Garcia, A. L.; Amor, F. M. del; Rincon, L.

2013-05-01

The use of almond by products as substrate in greenhouses for growing vegetables has a great economic interest. The objective of this work was to assess the use of two almond by-products (almond shell-AS and almond hull-AH), which had been previously conditioned without composting, as substrates for pepper (cv. Caprino F1) production and to study their effects on the yield, fruit size, and fruit mineral content. Physical, physico-chemical, and chemical characteristics of the almond by-products were determined both initially and during the pepper growing season. Initially, all values of the parameters studied ? except sulfur and iron ? differed significantly between the two substrates. During cultivation, the 18 substrate parameters and variables tested - except bulk density - exhibited significant variations with time for AS; the same occurred for AH, exceptions being pH, total nitrogen Nt, N-NH4, bulk density, and manganese. The changes in both substrates for the K, N, and S concentrations were significant. The nutrient levels in AH were higher than for AS. The almond shell and almond hull substrates produced slight decreases in total fruit yield with respect to the control (0.79 and 3.22 for AS and AH, respectively), with a lesser decrease for AS, due to reductions in the number of fruits per plant rather than to reductions in individual fruit weight. The plants grown on the AS and AH substrates showed a decrease in total fruit yield, due to reductions in the number of fruits per plant rather than reductions in individual fruit weight. (Author) 37 refs.
Genetic variations in ARE1 mediate grain yield by modulating nitrogen utilization in rice.

Science.gov (United States)

Wang, Qing; Nian, Jinqiang; Xie, Xianzhi; Yu, Hong; Zhang, Jian; Bai, Jiaoteng; Dong, Guojun; Hu, Jiang; Bai, Bo; Chen, Lichao; Xie, Qingjun; Feng, Jian; Yang, Xiaolu; Peng, Juli; Chen, Fan; Qian, Qian; Li, Jiayang; Zuo, Jianru

2018-02-21

In crops, nitrogen directly determines productivity and biomass. However, the improvement of nitrogen utilization efficiency (NUE) is still a major challenge in modern agriculture. Here, we report the characterization of are1, a genetic suppressor of a rice fd-gogat mutant defective in nitrogen assimilation. ARE1 is a highly conserved gene, encoding a chloroplast-localized protein. Loss-of-function mutations in ARE1 cause delayed senescence and result in 10-20% grain yield increases, hence enhance NUE under nitrogen-limiting conditions. Analysis of a panel of 2155 rice varieties reveals that 18% indica and 48% aus accessions carry small insertions in the ARE1 promoter, which result in a reduction in ARE1 expression and an increase in grain yield under nitrogen-limiting conditions. We propose that ARE1 is a key mediator of NUE and represents a promising target for breeding high-yield cultivars under nitrogen-limiting condition.
Cytogenetic determination of the effect of irradiation on in vitro lymphocyte transformation rates

International Nuclear Information System (INIS)

Lloyd, D.C.; Dolphin, G.W.; Purrott, R.J.

1976-01-01

The effect of x irradiation on the yield of transformed cells in 48-hr cultures has been studied in human peripheral-blood lymphocytes. Cytogenetic damage was used as a marker, aberration yields being obtained for mixed cultures prepared from equal numbers of normal and irradiated lymphocytes and from pure cultures of irradiated cells. Comparison of data from these two types of culture shows that the yield observed ranged from 90 percent of that expected at 50 rads to 11 percent at 700 rads. Poisson analysis demonstrated that for all doses, cells with high levels of structural damage were not selectively eliminated. The extent to which mitotic delay contributes to the reduction in numbers of transformed cells was examined by varying the time in cultures from 36 to 72 hr. The implication of this work in the field of radiation-dose estimation by chromosome-aberration analysis is discussed
On energy consumption for size-reduction and yields from subsequent enzymatic saccharification of pretreated lodgepole pine

Science.gov (United States)

W. Zhu; Junyong Zhu; Roland Gleisner; X.J. Pan

2010-01-01

This study investigated the effects of chemical pretreatment and disk-milling conditions on energy consumption for size-reduction and the efficiency of enzymatic cellulose saccharification of a softwood. Lodgepole pine wood chips produced from thinnings of a 100-year-old unmanaged forest were pretreated by hot-water, dilute-acid, and two SPORL processes (Sulfite...
Carbon and Mo transformations during the synthesis of mesoporous Mo2C/carbon catalysts by carbothermal hydrogen reduction

Science.gov (United States)

Wang, Haiyan; Liu, Shida; Liu, Bing; Montes, Vicente; Hill, Josephine M.; Smith, Kevin J.

2018-02-01

The synthesis of mesoporous Mo2C/carbon catalysts by carbothermal hydrogen reduction is reported. Petroleum coke (petcoke) was activated with KOH at 800 °C to obtain high surface area microporous activated petcoke (APC; 2000 m2/g). The APC was wet impregnated with ammonium heptamolybdate (AHM: 10 wt% Mo), dried and reduced in H2 at temperatures from 400 to 800 °C, to yield Mo2C/APC catalysts. Increased reduction temperature increased the Mo2C yield and the mesoporous volume of the Mo2C/APC. At a reduction temperature of 750 °C the mesopore volume of the catalyst doubled compared to the APC support and accounted for 37% of the total pore volume. Maintaining the final CHR temperature for 90 min further increased the Mo2C yield and mesoporosity of the catalyst. The role of Mo2C in the catalytic hydrogenation of the APC and mesopore generation is demonstrated. The activity of the Mo2C/carbon catalysts in the hydrodeoxygenation of 4-methyl phenol increased with increased CHR temperature and catalyst mesoporosity.
Image-guided percutaneous disc sampling: impact of antecedent antibiotics on yield

International Nuclear Information System (INIS)

Agarwal, V.; Wo, S.; Lagemann, G.M.; Tsay, J.; Delfyett, W.T.

2016-01-01

Aim: To evaluate the effect of antecedent antimicrobial therapy on diagnostic yield from percutaneous image-guided disc-space sampling. Materials and methods: A retrospective review of the electronic health records of all patients who underwent image-guided percutaneous sampling procedures for suspected discitis/osteomyelitis over a 5-year period was performed. One hundred and twenty-four patients were identified. Demographics, medical history, and culture results were recorded as well as duration of presenting symptoms and whether antecedent antibiotic therapy had been administered. Results: Of the 124 patients identified who underwent image-guided percutaneous disc-space sampling, 73 had received antecedent antibiotic treatment compared with 51 who had not. The overall positive culture rate for the present study population was 24% (n=30). The positive culture rate from patients previously on antibiotics was 21% (n=15) compared with 29% (n=15) for patients who had not received prior antibiotic treatment, which is not statistically significant (p=0.26). Eighty-six percent (n=63) of patients who had antecedent antibiotics received treatment for 4 or more days prior to their procedure, whereas 14% (n=10) received treatment for 1–3 days prior to their procedure. The difference in culture positivity rate between these two groups was not statistically significant (p=0.43). Culture results necessitated a change in antibiotic therapy in a third of the patients who had received antecedent antibiotic therapy. Conclusion: Antecedent antibiotic therapy, regardless of duration, did not result in significantly diminished diagnostic yield from percutaneous sampling for suspected discitis/osteomyelitis. The present results suggest that percutaneous biopsy may nonetheless yield positive diagnostic information despite prior antimicrobial therapy. If the diagnostic information may impact choice of therapeutic regimen, percutaneous biopsy should still be considered in cases where

Some links on this page may take you to non-federal websites. Their policies may differ from this site.