Peach bottom instability analysis with a RELAP5/PARCSv2.7 detailed thermal-hydraulic–neutronic model

International Nuclear Information System (INIS)

Abarca, A.; Barrachina, T.; Miró, R.; Ginestar, D.; Verdú, G.

2012-01-01

Highlights: ► A RELAP5-MOD3.3/PARCSv2.7 model developed to characterize oscillations in BWR. ► The TH to neutronic mapping is based on the Lambda modes obtained with VALKIN code. ► The results show that point PT U PV is an unstable point with a bottom-peaked profile. ► The SSA and the Power Modal Decomposition have been applied to the LPRMs data. ► An in-phase coupled with an out-of-phase oscillation appears. - Abstract: In this work, BWR stability analysis has been performed on an operating point (PT U PV) of Peach Bottom NPP which is inside the exclusion region in the operating power-flow map. The simulation has been made with the coupled code RELAP5-MOD3.3/PARCSv2.7. This point is achieved departing from test point 3 by a control rod movement as it is usually performed in Nuclear Power Plants. The thermal-hydraulic model is a detailed model that includes all the reactor vessel components: jet pumps, recirculation pumps, downcomer, reactor core and also the separator and the dryer. The reactor core has been modeled with 72 thermal-hydraulic channels, 71 represent the active core and 1 represents the core bypass. The reactor core thermal-hydraulic to neutronic representation (mapping) has been divided in four quadrants according to the first and second power harmonics (Lambda modes) obtained previously with the VALKIN code. This mapping was chosen in order not to condition the oscillation pattern. The transient starts with the control rod movement. The calculated results show that point PT U PV is an unstable point and the obtained relative axial power distribution shows a bottom-peaked profile, which is characteristic of unstable cores.

RETRAN-3D MOD003 Peach Bottom Turbine Trip 2 Multidimensional Kinetics Analysis Models and Results

International Nuclear Information System (INIS)

Mori, Michitsugu; Ogura, Katsunori; Gose, Garry C.; Wu, J.-Y.

2003-01-01

An analysis of the Peach Bottom Unit 2 Turbine Trip Test 2 (PB2/TT2) has been performed using RETRAN-3D MOD003. The purpose of the analysis was to investigate the PB2/TT2 overpressurization transient using the RETRAN-3D multidimensional kinetics model

MELCOR simulation of long-term station blackout at Peach Bottom

International Nuclear Information System (INIS)

Madni, I.K.

1990-01-01

This paper presents the results from MELCOR (Version 1.8BC) calculations of the Long-Term Station Blackout Accident Sequence, with failure to depressurize the reactor vessel, at the Peach Bottom (BWR Mark I) plant, and presents comparisons with Source Term Code Package (STCP) calculations of the same sequence. This sequence assumes that batteries are available for six hours following loss of all power to the plant. Following battery failure, the reactor coolant system (RCS) inventory is boiled off through the relief valves by continued decay heat generation. This leads to core uncovery, heatup, clad oxidation, core degradation, relocation, and, eventually, vessel failure at high pressure. STCP has calculated the transient out to 13.5 hours after core uncovery. The results include the timing of key events, pressure and temperature response in the reactor vessel and containment, hydrogen production, and the release of source terms to the environment. 12 refs., 23 figs., 3 tabs

Peach bottom cycle 2 stability analysis using RELAP5/PARCS

International Nuclear Information System (INIS)

Maggini, F.; D'Auria, F.; Miro, R.; Verdu, G.; Ginestar, D.

2003-01-01

Boiling channels and systems may oscillate owing to the behaviour of the liquid-steam mixture used for removing the thermal power. A thermal-hydraulic system may be unstable under particular operating conditions. Two kinds of power oscillation have been observed in BWR cores. One is an in-phase (core-wide) and the other is an out-of-phase (regional) oscillation. Since the above feature can make detection more difficult, the latter oscillation is potentially more severe. The problem is well known since the design of the first BWR system. However, to improve the safety systems of these reactors, it is necessary to be able to detect in a reliable way these oscillations from the neutronic signals. The purpose of this work is to characterize the unstable behaviour of a BWR. Within this study, it has been performed a number of perturbation analysis. The coupled codes RELAP5-Mod3.3/PARCS have used for the simulation of the transients. Validation has been performed against Peach Bottom-2 Low-Flow Stability Test PT3. Three dimensional time domain BWR stability analysis were performed on test point 3 for the core wide oscillation mode. In this transient dynamically complex events take place, i.e., neutron kinetics is coupled with thermal-hydraulics and an in-phase oscillation has been developed. The calculated results are compared against the available experimental data. (author)

Sensitivity analyses of the peach bottom turbine trip 2 experiment

International Nuclear Information System (INIS)

Bousbia Salah, A.; D'Auria, F.

2003-01-01

In the light of the sustained development in computer technology, the possibilities for code calculations in predicting more realistic transient scenarios in nuclear power plants have been enlarged substantially. Therefore, it becomes feasible to perform 'Best-estimate' simulations through the incorporation of three-dimensional modeling of reactor core into system codes. This method is particularly suited for complex transients that involve strong feedback effects between thermal-hydraulics and kinetics as well as to transient involving local asymmetric effects. The Peach bottom turbine trip test is characterized by a prompt core power excursion followed by a self limiting power behavior. To emphasize and understand the feedback mechanisms involved during this transient, a series of sensitivity analyses were carried out. This should allow the characterization of discrepancies between measured and calculated trends and assess the impact of the thermal-hydraulic and kinetic response of the used models. On the whole, the data comparison revealed a close dependency of the power excursion with the core feedback mechanisms. Thus for a better best estimate simulation of the transient, both of the thermal-hydraulic and the kinetic models should be made more accurate. (author)

Socio-economic impacts of nuclear generating stations: Peach Bottom case study

International Nuclear Information System (INIS)

Pijawka, K.D.

1982-07-01

This report documents a case study of the socio-economic impacts of the construction and operation of the Peach Bottom nuclear power station. It is part of a major post-licensing study of the socio-economic impacts at twelve nuclear power stations. The case study covers the period beginning with the announcement of plans to construct the reactor and ending in the period 1980 to 1981. The case study deals with changes in the economy, population, settlement patterns and housing, local government and public services, social structure, and public response in the study area during the construction/operation of the reactor. A regional modeling approach is used to trace the impact of the construction/operation on the local economy, labor market, and housing market. Emphasis in the study is on the attribution of socio-economic impacts to the reactor or other causal factors. As part of the study of local public response to the construction/operation of the reactor, the effects of the Three Mile Island accident are examined

A bottom-up model to describe consumers’ preferences towards late season peaches

Energy Technology Data Exchange (ETDEWEB)

Groot, E.; Albisu, L.M.

2015-07-01

Peaches are consumed in Mediterranean countries since ancient times. Nowadays there are few areas in Europe that produce peaches with Protected Designation of Origin (PDO), and the Calanda area is one of them. The aim of this work is to describe consumers’ preferences towards late season PDO Calanda peaches in the city of Zaragoza, Spain, by a bottom-up model. The bottom-up model proves greater amount of information than top-down models. In this approach it is estimated one utility function per consumer. Thus, it is not necessary to make assumptions about preference distributions and correlations across respondents. It was observed that preference distributions were neither normal nor independently distributed. If those preferences were estimated by top-down models, conclusions would be biased. This paper also explores a new way to describe preferences through individual utility functions. Results show that the largest behavioural group gathered origin sensitive consumers. Their utility increased if the peaches were produced in the Calanda area and, especially, when peaches had the PDO Calanda brand. In sequence, the second most valuable attribute for consumers was the price. Peach size and packaging were not so important on purchase choice decision. Nevertheless, it is advisable to avoid trading smallest size peaches (weighting around 160 g/fruit). Traders also have to be careful by using active packaging. It was found that a group of consumers disliked this kind of product, probably, because they perceived it as less natural. (Author)

Final summary report on the Peach Bottom End-of-Life Program

International Nuclear Information System (INIS)

Steward, K.P.

1978-07-01

HTGR design methods verifications have been performed under the Peach Bottom End-of-Life Program by comparison of actual with predicted physics, thermal, fission product, and materials behavior in Peach Bottom. These design methods verifications have utilized the data determined from nondestructive fuel and circuit gamma scanning on-site, from laboratory examinations of samples removed from the primary circuit, and from a complementary program of Peach Bottom fuel element postirradiation examinations at Oak Ridge National Laboratory. Fifty-five driver fuel elements were axially gamma scanned to determine fission product distributions for use in burnup calculations, power profile determinations, and fission product release and redistribution studies. The cesium plateout distribution in the primary circuit was subsequently mapped by gamma scanning the ducting at 12 locations, axially traversing 79 steam generator tubes with Cd Te detectors from the water side, and internally scanning two vertical runs of ducting. Component removal involved trepanning of the primary circuit ducting, obtaining access to the steam generator internals, and removing over 100 superheater, evaporator, and economizer tubing samples. During this phase, macroscopic examinations of the steam generator and ducting internals were performed. Subsequent laboratory examinations of removed samples included radiochemical tests to substantiate in-situ gamma scans and to determine 90 Sr distributions; metallurgical tests to evaluate surface films, microstructural changes, and residual mechanical properties; and tritium permeation tests to provide data for improving HTGR tritium release predictions. The condition and metallurgical integrity of all components examined were found to be excellent, with minimal coolant/substrate interaction and entirely acceptable residual mechanical properties. The suitability of the materials used in the construction of the Peach Bottom HTGR was thereby confirmed

Analysis of containment venting at the Peach Bottom atomic power station

International Nuclear Information System (INIS)

Hanson, D.J.; Blackman, H.S.; Nelson, W.R.; Wright, R.E.; Leonard, M.T.; DiSalvo, R.

1988-01-01

An analysis of the extent to which containment venting would be effective in preventing or mitigating the consequences of severe accidents has been completed for the Peach Bottom Units 2 and 3 (BWR-4s with Mark I containments). The analysis indicates that the effectiveness of venting in preventing containment overpressurization highly depends on the sequence of the severe accident. Containment venting can be effective for several classes of sequences, including transients with failure of long-term decay heat removal and loss-of-coolant accidents with breaks inside the containment. However, based on draft procedures and equipment in place at the time of the evaluation, containment venting has limited potential for further reducing the risk associated with three severe accident sequences currently identified as important risk contributors at Peach Bottom. Means of improving the potential for risk reduction is identified, but their influence on risk is not analyzed. (orig./HP)

Analysis of containment venting at the Peach Bottom Atomic Power Station

International Nuclear Information System (INIS)

Hanson, D.J.; Blackman, H.S.; Nelson, W.R.; Wright, R.E.; Leonard, M.T.; DiSalvo, R.

1986-01-01

An analysis of the extent to which containment venting would be effective in preventing or mitigating the consequences of severe accidents has been completed for the Peach Bottom Atomic Power Station, Units 2 and 3 (BWR-4s with Mark I containments). The analysis indicates that the effectiveness of venting in preventing containment overpressurization highly depends on the sequence of the severe accident. Containment venting can be effective for several classes of sequences, including transients with failure of long-term decay heat removal and loss-of-coolant accidents with breaks inside the containment. However, based on draft procedures and equipment in place at the time of the evaluation, containment venting has limited potential for further reducing the risk associated with three severe accident sequences currently identified as important risk contributors at Peach Bottom. Means of improving the potential for risk reduction is identified, but their influence on risk is not analyzed

Peach Bottom Turbine Trip Simulations with RETRAN Using INER/TPC BWR Transient Analysis Method

International Nuclear Information System (INIS)

Kao Lainsu; Chiang, Show-Chyuan

2005-01-01

The work described in this paper is benchmark calculations of pressurization transient turbine trip tests performed at the Peach Bottom boiling water reactor (BWR). It is part of an overall effort in providing qualification basis for the INER/TPC BWR transient analysis method developed for the Kuosheng and Chinshan plants. The method primarily utilizes an advanced system thermal hydraulics code, RETRAN02/MOD5, for transient safety analyses. Since pressurization transients would result in a strong coupling effect between core neutronic and system thermal hydraulics responses, the INER/TPC method employs the one-dimensional kinetic model in RETRAN with a cross-section data library generated by the Studsvik-CMS code package for the transient calculations. The Peach Bottom Turbine Trip (PBTT) tests, including TT1, TT2, and TT3, have been successfully performed in the plant and assigned as standards commonly for licensing method qualifications for years. It is an essential requirement for licensing purposes to verify integral capabilities and accuracies of the codes and models of the INER/TPC method in simulating such pressurization transients. Specific Peach Bottom plant models, including both neutronics and thermal hydraulics, are developed using modeling approaches and experiences generally adopted in the INER/TPC method. Important model assumptions in RETRAN for the PBTT test simulations are described in this paper. Simulation calculations are performed with best-estimated initial and boundary conditions obtained from plant test measurements. The calculation results presented in this paper demonstrate that the INER/TPC method is capable of calculating accurately the core and system transient behaviors of the tests. Excellent agreement, both in trends and magnitudes between the RETRAN calculation results and the PBTT measurements, shows reliable qualifications of the codes/users/models involved in the method. The RETRAN calculated peak neutron fluxes of the PBTT

Peach Bottom HTGR decommissioning and component removal

International Nuclear Information System (INIS)

Kohler, E.J.; Steward, K.P.; Iacono, J.V.

1977-07-01

The prime objective of the Peach Bottom End-of-Life Program was to validate specific HTGR design codes and predictions by comparison of actual and predicted physics, thermal, fission product, and materials behavior in Peach Bottom. Three consecutive phases of the program provide input to the HTGR design methods verifications: (1) Nondestructive fuel and circuit gamma scanning; (2) removal of steam generator and primary circuit components; and (3) Laboratory examinations of removed components. Component removal site work commenced with establishment of restricted access areas and installation of controlled atmosphere tents to retain relative humidity at <30%. A mock-up room was established to test and develop the tooling and to train operators under simulated working conditions. Primary circuit ducting samples were removed by trepanning, and steam generator access was achieved by a combination of arc gouging and grinding. Tubing samples were removed using internal cutters and external grinding. Throughout the component removal phase, strict health physics, safety, and quality assurance programs were implemented. A total of 148 samples of primary circuit ducting and steam generator tubing were removed with no significant health physics or safety incidents. Additionally, component removal served to provide access fordetermination of cesium plateout distribution by gamma scanning inside the ducts and for macroexamination of the steam generator from both the water and helium sides. Evaluations are continuing and indicate excellent performance of the steam generator and other materials, together with close correlation of observed and predicted fission product plateout distributions. It is concluded that such a program of end-of-life research, when appropriately coordinated with decommissioning activities, can significantly advance nuclear plant and fuel technology development

Characteristics of potential repository wastes: Volume 4, Appendix 4A, Nuclear reactors at educational institutions of the United States; Appendix 4B, Data sheets for nuclear reactors at educational institutions; Appendix 4C, Supplemental data for Fort St. Vrain spent fuel; Appendix 4D, Supplemental data for Peach Bottom 1 spent fuel; Appendix 4E, Supplemental data for Fast Flux Test Facility

International Nuclear Information System (INIS)

1992-07-01

Volume 4 contains the following appendices: nuclear reactors at educational institutions in the United States; data sheets for nuclear reactors at educational institutions in the United States(operational reactors and shut-down reactors); supplemental data for Fort St. Vrain spent fuel; supplemental data for Peach Bottom 1 spent fuel; and supplemental data for Fast Flux Test Facility

Analysis of core damage frequency: Peach Bottom, Unit 2 internal events

International Nuclear Information System (INIS)

Kolaczkowski, A.M.; Cramond, W.R.; Sype, T.T.; Maloney, K.J.; Wheeler, T.A.; Daniel, S.L.

1989-08-01

This document contains the appendices for the accident sequence analysis of internally initiated events for the Peach Bottom, Unit 2 Nuclear Power Plant. This is one of the five plant analyses conducted as part of the NUREG-1150 effort for the Nuclear Regulatory Commission. The work performed and described here is an extensive reanalysis of that published in October 1986 as NUREG/CR-4550, Volume 4. It addresses comments from numerous reviewers and significant changes to the plant systems and procedures made since the first report. The uncertainty analysis and presentation of results are also much improved, and considerable effort was expended on an improved analysis of loss of offsite power. The content and detail of this report is directed toward PRA practitioners who need to know how the work was done and the details for use in further studies. 58 refs., 58 figs., 52 tabs

Analysis of the thermal monitoring data collected at the Peach Bottom Atomic Power Station

International Nuclear Information System (INIS)

Witten, A.J.; Gray, D.D.

1977-01-01

A comprehensive study of the data collected as part of the environmental technical specifications program for Units 2 and 3 of the Peach Bottom Atomic Power Station was conducted for the Office of Nuclear Regulatory Research of the U.S. Nuclear Regulatory Commission. The study included an analysis of both the hydrothermal and ecological data collected from 1967 through 1976. This paper presents the details of the hydrothermal analysis performed under this program. The two primary methods used for temperature monitoring, during both the preoperational and operational periods of the program, are a fixed thermograph network and boat survey measurements. Analysis of the boat survey data provides a fine resolution demonstrating variations in ambient temperature in Conowingo Pond, as well as providing a qualitative picture of the thermal plume produced by the Peach Bottom thermal discharge. The data from 18 thermograph stations was used for a quantitative probability analysis

Station blackout calculations for Peach Bottom

International Nuclear Information System (INIS)

Hodge, S.A.

1985-01-01

A calculational procedure for the Station Blackout Severe Accident Sequence at Browns Ferry Unit One has been repeated with plant-specific application to one of the Peach Bottom Units. The only changes required in code input are with regard to the primary continment concrete, the existence of sprays in the secondary containment, and the size of the refueling bay. Combustible gas mole fractions in the secondary containment of each plant during the accident sequence are determined. It is demonstrated why the current state-of-the-art corium/concrete interaction code is inadequate for application to the study of Severe Accident Sequences in plants with the BWR MK I or MK II containment design

Socioeconomic impacts of nuclear generating stations: Peach Bottom case study. Technical report 1 Oct 78-4 Jan 82

International Nuclear Information System (INIS)

Pijawka, K.D.

1982-07-01

The report documents a case study of the socioeconomic impacts of the construction and operation of the Peach Bottom nuclear power station. It is part of a major post-licensing study of the socioeconomic impacts at twelve nuclear power stations. The case study covers the period beginning with the announcement of plans to construct the reactor and ending in the period, 1980-81. The case study deals with changes in the economy, population, settlement patterns and housing, local government and public services, social structure, and public response in the study area during the construction/operation of the reactor. A regional modeling approach is used to trace the impact of construction/operation on the local economy, labor market, and housing market. Emphasis in the study is on the attribution of socioeconomic impacts to the reactor or other causal factors. As part of the study of local public response to the construction/operation of the reactor, the effects of the Three Mile Island accident are examined

RETRAN-3D Analysis Of The OECD/NRC Peach Bottom 2 Turbine Trip Benchmark

International Nuclear Information System (INIS)

Barten, W.; Coddington, P.

2003-01-01

This paper presents the PSI results on the different Phases of the Peach Bottom BWR Turbine Trip Benchmark using the RETRAN-3D code. In the first part of the paper, the analysis of Phase 1 is presented, in which the system pressure is predicted based on a pre-defined core power distribution. These calculations demonstrate the importance of accurate modelling of the non-equilibrium effects within the steam separator region. In the second part, a selection of the RETRAN-3D results for Phase 2 are given, where the power is predicted using a 3-D core with pre-defined core flow and pressure boundary conditions. A comparison of calculations using the different (Benchmark-specified) boundary conditions illustrates the sensitivity of the power maximum on the various resultant system parameters. In the third part of the paper, the results of the Phase 3 calculation are presented. This phase, which is a combination of the analytical work of Phases 1 and 2, gives good agreement with the measured data. The coupling of the pressure and flow oscillations in the steam line, the mass balance in the core, the (void) reactivity and the core power are all discussed. It is shown that the reactivity effects resulting from the change in the core void can explain the overall behaviour of the transient prior to the reactor scram. The time-dependent, normalized power for different thermal-hydraulic channels in the core is discussed in some detail. Up to the time of reactor scram, the power change was similar in all channels, with differences of the order of only a few percent. The axial shape of the channel powers at the time of maximum (overall) power increased in the core centre (compared with the shape at time zero). These changes occur as a consequence of the relative change in the channel void, which is largest in the region of the onset of boiling, and the influence on the different fuel assemblies of the complex ring pattern of the control rods. (author)

RETRAN-3D Analysis Of The OECD/NRC Peach Bottom 2 Turbine Trip Benchmark

Energy Technology Data Exchange (ETDEWEB)

Barten, W.; Coddington, P

2003-03-01

This paper presents the PSI results on the different Phases of the Peach Bottom BWR Turbine Trip Benchmark using the RETRAN-3D code. In the first part of the paper, the analysis of Phase 1 is presented, in which the system pressure is predicted based on a pre-defined core power distribution. These calculations demonstrate the importance of accurate modelling of the non-equilibrium effects within the steam separator region. In the second part, a selection of the RETRAN-3D results for Phase 2 are given, where the power is predicted using a 3-D core with pre-defined core flow and pressure boundary conditions. A comparison of calculations using the different (Benchmark-specified) boundary conditions illustrates the sensitivity of the power maximum on the various resultant system parameters. In the third part of the paper, the results of the Phase 3 calculation are presented. This phase, which is a combination of the analytical work of Phases 1 and 2, gives good agreement with the measured data. The coupling of the pressure and flow oscillations in the steam line, the mass balance in the core, the (void) reactivity and the core power are all discussed. It is shown that the reactivity effects resulting from the change in the core void can explain the overall behaviour of the transient prior to the reactor scram. The time-dependent, normalized power for different thermal-hydraulic channels in the core is discussed in some detail. Up to the time of reactor scram, the power change was similar in all channels, with differences of the order of only a few percent. The axial shape of the channel powers at the time of maximum (overall) power increased in the core centre (compared with the shape at time zero). These changes occur as a consequence of the relative change in the channel void, which is largest in the region of the onset of boiling, and the influence on the different fuel assemblies of the complex ring pattern of the control rods. (author)

Analysis of Peach Bottom station blackout with MELCOR

International Nuclear Information System (INIS)

Dingman, S.E.; Cole, R.K.; Haskin, F.E.; Summers, R.M.; Webb, S.W.

1987-01-01

A demonstration analysis of station blackout at Peach Bottom has been performed using MELCOR and the results have been compared with those from MARCON 2.1B and the Source Term Code Package (STCP). MELCOR predicts greater in-vessel hydrogen production, earlier melting and core collapse, but later debris discharge than MARCON 2.1B. The drywell fails at vessel breach in MELCOR, but failure is delayed about an hour in MARCON 2.1B. These differences are mainly due to the MELCOR models for candling during melting, in-core axial conduction, and continued oxidation and heat transfer from core debris following lower head dryout. Three sensitivity calculations have been performed with MELCOR to address uncertainties regarding modeling of the core-concrete interactions. The timing of events and the gas and radionuclide release rates are somewhat different in the base case and the three sensitivity cases, but the final conditions and total releases are similar

Fission product behaviour during operation of the second Peach Bottom core

International Nuclear Information System (INIS)

Malinauskas, A.P.; Nordwall, H.J. de; Dyer, F.F.; Wichner, R.P.; Martin, W.J.; Kolb, J.O.

1976-01-01

The Peach Bottom high-temperature, gas-cooled reactor began operation on 1 June 1967 and continued power production until 9 October 1969, accumulating 452 equivalent full power days (EFPD) operation. After reload, power production with Core 2 began 14 July 1970 and terminated 31 October 1974 after 897 EFPD operation. Surveillance of fission product release and behaviour was intensified during Core 2 operation to permit a wider range of measurements to be made. In addition to monitoring the noble gas content of the fuel element purge system and the coolant circuit, the programme was extended to include measurements of radioactive and other condensible species (including dust) entering or exiting the core and steam generator, and of surface concentrations of gamma-emitting nuclides deposited on the primary coolant surfaces. These data, which were obtained over the operating period April 1971 - October 1974, are summarized and discussed. The data demonstrate that caesium behaviour in the coolant circuit during the first two-thirds of Core 2 life was primarily governed by caesium released during Core 1 operation. The data also indicate that whereas the steam generator surfaces attenuate molecular caesium concentrations in the coolant, the dust-borne component is remarkably persistent. Driver fuel elements were removed from the reactor after 385 EFPD, 701 EFPD, and at end-of-life. These fuel elements are at various stages of an intensive post-irradiation examination. Some of the axial and radial concentration profiles of fission products which have been obtained are likewise presented. Although these profiles indicate varied fission product behaviour, the observations can in general be qualitatively described on the basis of the operational histories of the fuel elements. (author)

Critical evaluation of the nonradiological environmental technical specifications. Volume 3. Peach Bottom Atomic Power Station Units 2 and 3

International Nuclear Information System (INIS)

Adams, S.M.; Cunningham, P.A.; Gray, D.D.; Kumar, K.D.; Witten, A.J.

1976-01-01

A comprehensive study of the data collected as part of the environmental Technical Specifications program for Units 2 and 3 of the Peach Bottom Nuclear Power Plant was conducted for the Office of Regulatory Research of the U.S. Nuclear Regulatory Commission. The program included an analysis of both the hydrothermal and ecological monitoring data collected from 1967 through 1976. Specific recommendations are made for improving both the present hydrothermal and ecological monitoring programs. Hydrothermal monitoring would be improved by more complete reporting of in-plant operating parameters. In addition, the present boat surveys could be discontinued, and monitoring efforts could be directed toward expanding the present thermograph network. Ecological monitoring programs were judged to be of high quality because standardized collection techniques, consistent reporting formats, and statistical analyses were performed on all of the data and were presented in an annual report. Sampling for all trophic groups was adequate for the purposes of assessing power plant induced perturbations. Considering the extensive period of preoperational data (six years) and operational data (three years) available for analysis, consideration could be given to reducing monitoring effort after data have been collected for a period when both units are operating at full capacity. In this way, an assessment of the potential ecological impact of the Peach Bottom facility can be made under conditions of maximum plant induced perturbations

Peach Bottom Atomic Power Station recirc pipe dose rates with zinc injection and condenser replacement

International Nuclear Information System (INIS)

DiCello, D.C.; Odell, A.D.; Jackson, T.J.

1995-01-01

Peach Bottom Atomic Power Station (PBAPS) is located near the town of Delta, Pennsylvania, on the west bank of the Susquehanna River. It is situated approximately 20 miles south of Lancaster, Pennsylvania. The site contains two boiling water reactors of General Electric design and each rated at 3,293 megawatts thermal. The units are BWR 4s and went commercial in 1977. There is also a decommissioned high temperature gas-cooled reactor on site, Unit 1. PBAPS Unit 2 recirc pipe was replaced in 1985 and Unit 3 recirc pipes replaced in 1988 with 326 NGSS. The Unit 2 replacement pipe was electropolished, and the Unit 3 pipe was electropolished and passivated. The Unit 2 brass condenser was replaced with a Titanium condenser in the first quarter of 1991, and the Unit 3 condenser was replaced in the fourth quarter of 1991. The admiralty brass condensers were the source of natural zinc in both units. Zinc injection was initiated in Unit 2 in May 1991, and in Unit 3 in May 1992. Contact dose rate measurements were made in standard locations on the 28-inch recirc suction and discharge lines to determine the effectiveness of zinc injection and to monitor radiation build-up in the pipe. Additionally, HPGe gamma scans were performed to determine the isotopic composition of the oxide layer inside the pipe. In particular, the specific (μCi/cm 2 ) of Co-60 and Zn-65 were analyzed

Peach Bottom Atomic Power Station recirc pipe dose rates with zinc injection and condenser replacement

Energy Technology Data Exchange (ETDEWEB)

DiCello, D.C.; Odell, A.D.; Jackson, T.J. [PECO Energy Co., Delta, PA (United States)

1995-03-01

Peach Bottom Atomic Power Station (PBAPS) is located near the town of Delta, Pennsylvania, on the west bank of the Susquehanna River. It is situated approximately 20 miles south of Lancaster, Pennsylvania. The site contains two boiling water reactors of General Electric design and each rated at 3,293 megawatts thermal. The units are BWR 4s and went commercial in 1977. There is also a decommissioned high temperature gas-cooled reactor on site, Unit 1. PBAPS Unit 2 recirc pipe was replaced in 1985 and Unit 3 recirc pipes replaced in 1988 with 326 NGSS. The Unit 2 replacement pipe was electropolished, and the Unit 3 pipe was electropolished and passivated. The Unit 2 brass condenser was replaced with a Titanium condenser in the first quarter of 1991, and the Unit 3 condenser was replaced in the fourth quarter of 1991. The admiralty brass condensers were the source of natural zinc in both units. Zinc injection was initiated in Unit 2 in May 1991, and in Unit 3 in May 1992. Contact dose rate measurements were made in standard locations on the 28-inch recirc suction and discharge lines to determine the effectiveness of zinc injection and to monitor radiation build-up in the pipe. Additionally, HPGe gamma scans were performed to determine the isotopic composition of the oxide layer inside the pipe. In particular, the specific ({mu}Ci/cm{sup 2}) of Co-60 and Zn-65 were analyzed.

Comparative study of the Peach Bottom turbine trip experiment using two different coupled codes approaches

International Nuclear Information System (INIS)

Bambara, M.; Bousbia-Salah, A.; D'Auria, F.

2005-01-01

Full text of publication follows: In the last years a great concern about the neutron-3D/thermal-hydraulic codes coupling took place. Owing to the improved computational technology, 'best estimate' analyses are today a common tool to assess safety features, and they are necessary if an asymmetric behaviour in the core region exists, or if strong interactions between the core neutronics and reactor thermal-hydraulic occur. In order to validate the coupled codes performances, several international programmes were issued. Among these activities, the OECD/NEA BWR Turbine Trip (TT) was chosen for further sensitivity analyses. It consists of a turbine trip (TT) experiment carried out at the Peach Bottom 2 BWR. In this paper, the results of two different coupled codes systems are summarized and compared. The BWR TT simulations were carried out coupling the thermal-hydraulic system code RELAP5/mode 3.2 to the 3D neutron kinetics code Parcs/2.3, and also the system code ATHLET to the neutronics code QUABOX-CUBBOX. An exhaustive overview of the main features is given, and those aspects, which need further developments and experiences, are pointed out. (authors)

Nuclear reactor construction with bottom supported reactor vessel

International Nuclear Information System (INIS)

Sharbaugh, J.E.

1987-01-01

This patent describes an improved liquid metal nuclear reactor construction comprising: (a) a nuclear reactor core having a bottom platform support structure; (b) a reactor vessel for holding a large pool of low pressure liquid metal coolant and housing the core; (c) a containment structure surrounding the reactor vessel and having a sidewall spaced outwardly from the reactor vessel side wall and having a base mat spaced below the reactor vessel bottom end wall; (d) a central small diameter post anchored to the containment structure base mat and extending upwardly to the reactor vessel to axially fix the bottom end wall of the reactor vessel and provide a center column support for the lower end of the reactor core; (e) annular support structure disposed in the reactor vessel on the bottom end wall and extending about the lower end of the core; (f) structural support means disposed between the containment structure base mat and bottom end of the reactor vessel wall and cooperating for supporting the reactor vessel at its bottom end wall on the containment structure base mat to allow the reactor vessel to expand radially but substantially prevent any lateral motions that might be imposed by the occurrence of a seismic event; (g) a bed of insulating material disposed between the containment structure base mat and the bottom end wall of the reactor vessel and uniformly supporting the reactor vessel at its bottom end wall; freely expand radially from the central post as it heats up while providing continuous support thereof; (h) a deck supported upon the wall of the containment vessel above the top open end of the reactor vessel; and (i) extendible and retractable coupling means extending between the deck and the top open end of the reactor vessel and flexibly and sealably interconnecting the reactor vessel at its top end to the deck

Risk-based selection of SSCs at Peach Bottom

International Nuclear Information System (INIS)

Krueger, G.A.; Marie, A.J.

1993-01-01

The purpose of identifying risk significant systems, structures, and components (SSCS) that are within the scope of the maintenance rule is to bring a higher level of attention to a subset of those SSCS. These risk-significant SSCs will have specific performance criteria established for them, and failure to meet this performance criteria will result in establishing goals to ensure the necessary improvement in performance. The Peach Bottom individual plant examination (IPE) results were used to provide insights for the verification of proposed probabilistic risk assessment (PRA) methods set forth in the Industry Maintenance Guidelines for Implementation of the Maintenance Rule. The objective of reviewing the methods for selection of SSCs that are considered risk significant was to ensure the methods used are logical, reproducible, and can be consistently applied

Distribution of fission products in Peach Bottom HTGR fuel element E01-01

International Nuclear Information System (INIS)

Wichner, R.P.; Dyer, F.F.; Martin, W.J.; Fairchild, L.L.

1978-10-01

The fifth in a projected series of six postirradiation examinations of Peach Bottom High-Temperature Gas-Cooled Reactor driver fuel elements is described. The element analyzed received an equivalent of 897 full-power days of irradiation prior to the scheduled termination of Core 2 operation. The examination procedures emphasized the determination of fission product distributions in the graphite portions of the fuel element. Continuous axial scans indicated a 137 Cs inventory of 20.3 Ci in the graphite sleeve and 8.1 Ci in the spine at the time of element withdrawal from the core. In addition, the nuclides 134 Cs, /sup 110 m/Ag, 60 Co, and 154 Eu were found in the graphite portions of the fuel element in significant amounts. Radial distributions of these nuclides plus the beta-emitters 3 H, 14 C, and 90 Sr were obtained at four axial locations of the fueled region of the element sleeve and two axial locations of the element spine. The radial dissection was accomplished by use of a manipulator-operated lathe in a hot cell. In addition to fission product distributions, the appearance of the component parts of the element was recorded photographically, fuel compact and graphite dimensions were recorded at numerous locations, and metallographic examinations of the fuel were performed

Summary of Preliminary Criticality Analysis for Peach Bottom Fuel in the DOE Standardized Spent Nuclear Fuel Canister

International Nuclear Information System (INIS)

Henrikson, D.J.

1999-01-01

The Department of Energy's (DOE's) National Spent Nuclear Fuel Program is developing a standardized set of canisters for DOE spent nuclear fuel (SNF). These canisters will be used for DOE SNF handling, interim storage, transportation, and disposal in the national repository. Several fuels are being examined in conjunction with the DOE SNF canisters. This report summarizes the preliminary criticality safety analysis that addresses general fissile loading limits for Peach Bottom graphite fuel in the DOE SNF canister. The canister is considered both alone and inside the 5-HLW/DOE Long Spent Fuel Co-disposal Waste Package, and in intact and degraded conditions. Results are appropriate for a single DOE SNF canister. Specific facilities, equipment, canister internal structures, and scenarios for handling, storage, and transportation have not yet been defined and are not evaluated in this analysis. The analysis assumes that the DOE SNF canister is designed so that it maintains reasonable geometric integrity. Parameters important to the results are the canister outer diameter, inner diameter, and wall thickness. These parameters are assumed to have nominal dimensions of 45.7-cm (18.0-in.), 43.815-cm (17.25-in), and 0.953-cm (0.375-in.), respectively. Based on the analysis results, the recommended fissile loading for the DOE SNF canister is 13 Peach Bottom fuel elements if no internal steel is present, and 15 Peach Bottom fuel elements if credit is taken for internal steel

Analysis of core damage frequency: Peach Bottom, Unit 2 internal events appendices

International Nuclear Information System (INIS)

Kolaczkowski, A.M.; Cramond, W.R.; Sype, T.T.; Maloney, K.J.; Wheeler, T.A.; Daniel, S.L.

1989-08-01

This document contains the appendices for the accident sequence analysis of internally initiated events for the Peach Bottom, Unit 2 Nuclear Power Plant. This is one of the five plant analyses conducted as part of the NUREG-1150 effort for the Nuclear Regulatory Commission. The work performed and described here is an extensive reanalysis of that published in October 1986 as NUREG/CR-4550, Volume 4. It addresses comments from numerous reviewers and significant changes to the plant systems and procedures made since the first report. The uncertainty analysis and presentation of results are also much improved, and considerable effort was expended on an improved analysis of loss of offsite power. The content and detail of this report is directed toward PRA practitioners who need to know how the work was done and the details for use in further studies. The mean core damage frequency is 4.5E-6 with 5% and 95% uncertainty bounds of 3.5E-7 and 1.3E-5, respectively. Station blackout type accidents (loss of all ac power) contributed about 46% of the core damage frequency with Anticipated Transient Without Scram (ATWS) accidents contributing another 42%. The numerical results are driven by loss of offsite power, transients with the power conversion system initially available operator errors, and mechanical failure to scram. 13 refs., 345 figs., 171 tabs

Postirradiation examination of Peach Bottom HTGR Driver Fuel Element E06-01

International Nuclear Information System (INIS)

Dyer, F.F.; Wichner, R.P.; Martin, W.J.; Fairchild, L.L.; Kedl, R.J.; de Nordwall, H.J.

1976-04-01

The report presented describes the postirradiation examinations of driver fuel element E06-01, which had been irradiated an equivalent of 384 full-power days in Peach Bottom, Unit 1. The fuel element is described in detail and its temperature and irradiation service history briefly outlined. Results presented include: (1) visual observations; (2) critical dimensions of fuel compacts, sleeve, and spine; (3) axial distributions of gamma-emitting nuclides plus 3 H and 90 Sr; (4) radial distributions of these nuclides in the sleeve and spine at three axial locations in the fueled regions and three locations in the upper reflector; (5) metallographic examination of samples of fuel compact material; and (6) burnup determinations via radiochemical analyses at two compact locations

Fission product behaviour in the Peach Bottom and Fort St. Vrain HTGRs

International Nuclear Information System (INIS)

Hanson, D.L.; Baldwin, N.L.; Strong, D.E.

1981-01-01

Actual operating data from the Peach Bottom (PB) and Fort St. Vrain (FSV) High-Temperature Gas-Cooled Reactors (HTGRs) have been compared with code predictions to assess the validity of the methods used to predict the behaviour of fission products in the primary coolant circuit. For both reactors the measured circuit activities were significantly below design values, and the observations generally verify the codes used for large HTGR design. The PB primary circuit after seven years of operation was exceptionally clean. A fuel element purge system virtually eliminated the release of fission gases into the primary coolant circuit. Extensive examinations at end-of-life revealed that only Cs and trace amounts of Sr had plated out in the circuit. Their plateout distributions were in excellent agreement with PAD code predictions. Most of the deposited activity was associated with carbonaceous surface films which resulted from occasional small inleakages of lubricating oil. Primary circuit activities in FSV during the first cycle were also very low. Noble gas activity was about 1% of the design limit; and the circulating iodines were at least one order of magnitude below the limit, although the measurement uncertainties are significant. The plateout per pass of the iodine isotopes increased with decreasing half-life (the value for I-131 is about 1% per pass) as predicted with the PADLOC code. Gamma scanning of two helium circulators indicated very low plateout activities. Iodine-131 was the principal fission product observed, along with small amounts of Cs-134, Cs-137, and Ba/La-140. (author)

Postirradiation examination and evaluation of Peach Bottom fuel test element FTE-6

International Nuclear Information System (INIS)

Wallroth, C.F.; Holzgraf, J.F.; Jensen, D.D.

1977-09-01

Fuel test element FTE-6 was irradiated in the Peach Bottom high-temperature gas-cooled reactor (HTGR) for 645 equivalent full power days. Four fuel varieties, contained in H-327 graphite bodies, were tested. A primary result of this test has been to demonstrate acceptable performance even with calculated high stresses in the graphite bodies. Heterogeneous fuel loadings in the element caused local power peaking and azimuthal power variations, deforming the graphite fuel bodies and thereby causing bowing nearly five times as large as the diametral clearance within the sleeve. The axial stresses resulting from interference between the fuel bodies and sleeve were estimated to have reached 45% of the ultimate material strength at the end of the irradiation. Residual stresses from differential contraction within the fuel body resulted in probable in-plane stress levels of 130% of the material strength at the end-of-life shutdown and of up to 150% of the strength at shutdown during the irradiation cycle. The high in-plane stresses are local peaks at the corners of a sharp notch in the element, which may account for the stresses failing to cause damage. The lack of observable damage, however, indicates that the methods and data used for stress analysis give results that are either fairly accurate or conservative

Analysis of containment venting for the Peach Bottom Atomic Power Station

International Nuclear Information System (INIS)

Hanson, D.J.; Wright, R.E.; Jenkins, J.P.

1986-01-01

The effectiveness of containment venting as a means of preventing or mitigating the consequences of severe accidents was evaluated for Peach Bottom Atomic Power Station Units 2 and 3 (BWR-4s with Mark I containments). Results from this evaluation indicate that the effectiveness of venting in preventing containment failure is highly dependent on the severe accident sequence. Containment venting can be effective for several classes of sequences, including loss-of-coolant accidents with breaks in the containment and transients with a failure of containment heat removal. However, based on draft procedures and equipment in place at the time of the evaluation, containment venting has limited potential for further reducing the risk associated with several sequences currently identified as significant contributors to risk. Means of improving the potential for risk reduction were identified, but their influence on risk was not analyzed

RETRAN-3D analysis of the base case and the four extreme cases of the OECD/NRC Peach Bottom 2 Turbine Trip benchmark

International Nuclear Information System (INIS)

Barten, Werner; Coddington, Paul; Ferroukhi, Hakim

2006-01-01

This paper presents the results of RETRAN-3D calculations of the base case and the four extreme cases of phase 3 of the Peach Bottom 2 OECD/NRC Turbine Trip benchmark for coupled thermal-hydraulic and neutronic codes. The PSI-RETRAN-3D model gives good agreement with the measured data of the base case. In addition to the base case, the analysis of the extreme cases provides a further understanding of the reactor behaviour, which is the result of the dynamic coupling of the whole system, i.e., the interaction between the steam line and vessel flows, the pressure, the Doppler, void and control reactivity and power. For the extreme cases without scram the bank of safety relief valves is able to mitigate the effects of the turbine trip for short times. The 3-D nature of the core power distribution has been investigated by analysing the power density of the different thermal-hydraulic channels. In all cases prior to the reactor scram the course of the power is similar in all the channels with differences of the order of a few percent showing that, by and large, the core acts in a coherent manner. At the time of maximum power, the axial power distribution in the different channels is increased at the core centre with respect to the distribution at time zero, by an amount, which is different for the different channels

77 FR 5281 - State-of-the-Art Reactor Consequence Analyses Reports

Science.gov (United States)

2012-02-02

... NUCLEAR REGULATORY COMMISSION [Docket ID: NRC-2012-0022] State-of-the-Art Reactor Consequence... release of Draft NUREG-1935, ``State-of-the-Art Reactor Consequence Analyses (SOARCA) Report,'' for public... offsite radiological health consequences for potential severe reactor accidents for the Peach Bottom...

SENTINEL trademark technical basis report for Peach Bottom. Final report

International Nuclear Information System (INIS)

1998-04-01

PECO Energy in cooperation with the Electric Power Research Institute (EPRI) installed the SENTINEL trademark software at its Peach Bottom Atomic Power Station (PBAPS). This software incorporates models of the safety and support systems which are used to display the defense in depth present in the plant and a quantitative assessment of the plant risks during proposed on-line maintenance. During the past nine months, PECO Energy personnel have used this display to evaluate the safety of proposed on-line maintenance schedules. The report describes the motivation for and the development of the SENTINEL software. It describes the generation of Safety Function Assessment Trees and Plant Transient Assessment Trees and their use in evaluating the level of defense-in-depth of key plant safety functions and the susceptibility of the plant to critical transient events. Their results are displayed by color indicators ranging from green, through yellow and orange, to red to show increasingly hazardous conditions. The report describes the use of the PBAPS Probabilistic Safety Assessment within the SENTINEL code to calculate an instantaneous core damage frequency and the criteria by which this frequency is translated to a color indicator

Monitoring for shaft cracks on reactor recirculation pumps

International Nuclear Information System (INIS)

Kowal, M.G.; O'Brien, J.T. Jr.

1989-01-01

The article discusses the vibration characteristics associated with a boiling water reactor (BWR) recirculation pump. It also describes the application of diagnostic techniques and shaft crack theory to an on-line diagnostic monitoring system for reactor recirculation pumps employed at Philadelphia Electric Company's Peach Bottom Atomic Power Station. Specific emphasis is placed on the unique monitoring techniques associated with these variable speed vertical pumps

Requirements of, and operating experience with, gas analyses on high temperature reactors

International Nuclear Information System (INIS)

Nieder, R.

1982-06-01

Impurities in the helium coolant of the primary coolant circuit of HTGR's are mainly due to ingress of air or water, occasionally oil. Typical concentrations are given of H 2 O, H 2 , CO 2 , CO, N 2 , CH 4 and Ar in the AVR, Dragon, Peach Bottom and Fort St. Vrain reactors. A characteristic is presented of measuring devices for measuring non-active impurities in helium; measuring methods are described and a list is given of required and actual detection limits. Also given are concentrations of solid fission and activation products and tritium in the primary circuit of the AVR reactor

A resting bottom sodium cooled fast reactor

International Nuclear Information System (INIS)

Costes, D.

2012-01-01

This follows ICAPP 2011 paper 11059 'Fast Reactor with a Cold Bottom Vessel', on sodium cooled reactor vessels in thermal gradient, resting on soil. Sodium is frozen on vessel bottom plate, temperature increasing to the top. The vault cover rests on the safety vessel, the core diagrid welded to a toric collector forms a slab, supported by skirts resting on the bottom plate. Intermediate exchangers and pumps, fixed on the cover, plunge on the collector. At the vessel top, a skirt hanging from the cover plunges into sodium, leaving a thin circular slit partially filled by sodium covered by argon, providing leak-tightness and allowing vessel dilatation, as well as a radial relative holding due to sodium inertia. No 'air conditioning' at 400 deg. C is needed as for hanging vessels, and this allows a large economy. The sodium volume below the slab contains isolating refractory elements, stopping a hypothetical corium flow. The small gas volume around the vessel limits any LOCA. The liner cooling system of the concrete safety vessel may contribute to reactor cooling. The cold resting bottom vessel, proposed by the author for many years, could avoid the complete visual inspection required for hanging vessels. However, a double vessel, containing support skirts, would allow introduction of inspecting devices. Stress limiting thermal gradient is obtained by filling secondary sodium in the intermediate space. (authors)

Bottom reflector for power reactors

International Nuclear Information System (INIS)

Elter, C.; Kissel, K.F.; Schoening, J.; Schwiers, H.G.

1982-01-01

In pebble bed reactors erosion and damage due fuel elements movement on the surface of the bottom reflector should be minimized. This can be achieved by chamfering and/or rounding the cover edges of the graphite blocks and the edges between the drilled holes and the surface of the graphite block. (orig.) [de

Fuel-Cycle and Nuclear Material Disposition Issues Associated with High-Temperature Gas Reactors

International Nuclear Information System (INIS)

Shropshire, D.E.; Herring, J.S.

2004-01-01

The objective of this paper is to facilitate a better understanding of the fuel-cycle and nuclear material disposition issues associated with high-temperature gas reactors (HTGRs). This paper reviews the nuclear fuel cycles supporting early and present day gas reactors, and identifies challenges for the advanced fuel cycles and waste management systems supporting the next generation of HTGRs, including the Very High Temperature Reactor, which is under development in the Generation IV Program. The earliest gas-cooled reactors were the carbon dioxide (CO2)-cooled reactors. Historical experience is available from over 1,000 reactor-years of operation from 52 electricity-generating, CO2-cooled reactor plants that were placed in operation worldwide. Following the CO2 reactor development, seven HTGR plants were built and operated. The HTGR came about from the combination of helium coolant and graphite moderator. Helium was used instead of air or CO2 as the coolant. The helium gas has a significant technical base due to the experience gained in the United States from the 40-MWe Peach Bottom and 330-MWe Fort St. Vrain reactors designed by General Atomics. Germany also built and operated the 15-MWe Arbeitsgemeinschaft Versuchsreaktor (AVR) and the 300-MWe Thorium High-Temperature Reactor (THTR) power plants. The AVR, THTR, Peach Bottom and Fort St. Vrain all used fuel containing thorium in various forms (i.e., carbides, oxides, thorium particles) and mixtures with highly enriched uranium. The operational experience gained from these early gas reactors can be applied to the next generation of nuclear power systems. HTGR systems are being developed in South Africa, China, Japan, the United States, and Russia. Elements of the HTGR system evaluated included fuel demands on uranium ore mining and milling, conversion, enrichment services, and fuel fabrication; fuel management in-core; spent fuel characteristics affecting fuel recycling and refabrication, fuel handling, interim

Construction of reactor vessel bottom of prestressed reinforced concrete

International Nuclear Information System (INIS)

Sitnikov, M.I.; Metel'skij, V.P.

1980-01-01

Methods are described for building reactor vessel bottoms of prestressed reinforced concrete during NPPs construction in Great Britain, France, Germany (F.R.) and the USA. Schematic of operations performed in succession is presented. Considered are different versions of one of the methods for concreting a space under a facing by forcing concrete through a hole in the facing. The method provides tight sticking of the facing to the reactor vessel bottom concrete

Improved nuclear reactor construction with bottom supported reactor vessel

International Nuclear Information System (INIS)

Sharbaugh, J.E.

1987-01-01

An improved liquid metal nuclear reactor construction has a reactor core and a generally cylindrical reactor vessel for holding liquid metal coolant and housing the core within the pool. A generally cylindrical concrete containment structure surrounds the reactor vessel and a central support pedestal is anchored to the containment structure base mat and supports the bottom wall of the reactor vessel and the reactor core. The periphery of the reactor vessel bore is supported by an annular structure which allows thermal expansion but not seismic motion of the vessel, and a bed of thermally insulating material uniformly supports the vessel base whilst allowing expansion thereof. A guard ring prevents lateral seismic motion of the upper end of the reactor vessel. The periphery of the core is supported by an annular structure supported by the vessel base and keyed to the vessel wall so as to be able to expand but not undergo seismic motion. A deck is supported on the containment structure above the reactor vessel open top by annular bellows, the deck carrying the reactor control rods such that heating of the reactor vessel results in upward expansion against the control rods. (author)

Effect of Particle Orientation during Thermal Processing of Canned Peach Halves: A CFD Simulation

Directory of Open Access Journals (Sweden)

Adreas Dimou

2014-05-01

Full Text Available The objective of this work was to apply Computational Fluid Dynamics (CFD to study the effect of particle orientation on fluid flow, temperature evolution, as well as microbial destruction, during thermal processing of still cans filled with peach halves in sugar syrup. A still metal can with four peach halves in 20% sugar syrup was heated at 100 °C for 20 min and thereafter cooled at 20 °C. Infinite heat transfer coefficient between heating medium and external can wall was considered. Peach halves were orderly placed inside the can with the empty space originally occupied by the kernel facing, in all peaches, either towards the top or the bottom of the can. In a third situation, the can was placed horizontally. Simulations revealed differences on particle temperature profiles, as well as process F values and critical point location, based on their orientation. At their critical points, peach halves with the kernel space facing towards the top of the can heated considerably slower and cooled faster than the peaches having their kernel space facing towards the bottom of the can. The horizontal can case exhibited intermediate cooling but the fastest heating rates and the highest F process values among the three cases examined. The results of this study could be used in designing of thermal processes with optimal product quality.

Measuring device for water quality at reactor bottom

Energy Technology Data Exchange (ETDEWEB)

Urata, Hidehiro; Takagi, Jun-ichi

1995-10-27

The present invention concerns measurement for water quality at the bottom of a reactor of a BWR type plant, in which reactor water is sampled and analyzed in a state approximate to conditions in a pressure vessel. Based on the result, hydrogen injection amount is controlled during hydrogen injection operation. Namely, a monitor for water quality is disposed to a sampling line in communication with the bottom of a pressure vessel. A water quality monitor is disposed to a drain sampling line in communication with the bottom of the pressure vessel. A corrosion potentiometer is disposed to the pressure sampling line or the drain sampling line. A dissolved oxygen measuring device is disposed to the pressure vessel sampling line or the drain sampling line. With such a constitution, the reactor water can be sampled and analyzed in a state approximate to the conditions in the pressure vessel. In addition, signals from the water quality monitor are inputted to a hydrogen injection amount control device. As a result, the amount of hydrogen injected to primary coolants can be controlled in a state approximate to the conditions in the pressure vessel. (I.S.).

Measuring device for water quality at reactor bottom

International Nuclear Information System (INIS)

Urata, Hidehiro; Takagi, Jun-ichi.

1995-01-01

The present invention concerns measurement for water quality at the bottom of a reactor of a BWR type plant, in which reactor water is sampled and analyzed in a state approximate to conditions in a pressure vessel. Based on the result, hydrogen injection amount is controlled during hydrogen injection operation. Namely, a monitor for water quality is disposed to a sampling line in communication with the bottom of a pressure vessel. A water quality monitor is disposed to a drain sampling line in communication with the bottom of the pressure vessel. A corrosion potentiometer is disposed to the pressure sampling line or the drain sampling line. A dissolved oxygen measuring device is disposed to the pressure vessel sampling line or the drain sampling line. With such a constitution, the reactor water can be sampled and analyzed in a state approximate to the conditions in the pressure vessel. In addition, signals from the water quality monitor are inputted to a hydrogen injection amount control device. As a result, the amount of hydrogen injected to primary coolants can be controlled in a state approximate to the conditions in the pressure vessel. (I.S.)

Early hydrogen water chemistry in the boiling water reactor: industry-first demonstration

International Nuclear Information System (INIS)

Garcia, Susan E.; Odell, Andrew D.; Giannelli, Joseph F.

2012-09-01

Hydrogen injection into the BWR feedwater during power operation has resulted in significant IGSCC reductions. Further, noble metal application (NMCA) during shutdown or On-line NobleChem TM (OLNC) during power operation has greatly reduced the required hydrogen injection rate by catalyzing the hydrogen-oxygen reaction on the metal surfaces, reducing the electrochemical corrosion potential (ECP) at operating temperature to well below the mitigation ECP of -230 mV (SHE) at reactor water hydrogen to oxidant (O 2 + H 2 O 2 ) molar ratios of ≥2. Since IGSCC rates increase markedly at reduced temperature, and the potential for crack initiation exists, additional crack mitigation was desired. To close this gap in mitigation, the EPRI BWR Startup ECP Reduction research and development program commenced in 2008 to undertake laboratory and feasibility studies for adding a reductant to the reactor water system during start-ups. Under this program, ECP reductions of noble metal treated stainless steel sufficient to mitigate IGSCC at startup temperatures were achieved in the laboratory in the absence of radiation at hydrogen, hydrazine and carbohydrazide to oxygen molar ratios of ≥ 2, ≥1.5 and ≥0.7, respectively. Based on the familiarity of operating BWRs with using hydrogen, a demonstration of hydrogen injection during the startup of an actual BWR using noble metals was planned. This process, named EHWC (Early Hydrogen Water Chemistry), differs from the HDS (Hydrogen During Startup) approach that has been successful in Japan in that HDS injects sufficient hydrogen for bulk oxidant reduction whereas EHWC injects a smaller amount of hydrogen, sufficient to achieve a hydrogen:oxidant molar ratio of at least two at noble metal treated surfaces. The industry-first EHWC demonstration was performed at Exelon's Peach Bottom 3 nuclear power plant in October 2011. Prior to EHWC, Peach Bottom 3 had one NMCA (October 1999) and five annual OLNC applications (starting in 2007

The bottom-supported fast reactor - system simplifications and enhanced safety

International Nuclear Information System (INIS)

Petrozelli, J.; Golan, S.; Kawamura, Yutaka; Kumaoka, Yoshio; Nakagawa, Hiroshi

1992-01-01

The 600-MW(electric) bottom-supported fast reactor (BSFR) incorporates the following key features: (1) modular upper internal structure (UIS); (2) electromagnetic pumps (EMPs); (3) low-sodium-void-worth metal-fuel core; and (4) bottom supported reactor vessel (BSRV), which is entirely supported by the basement, except for the control rods, control rod drives (CRDs), UIS, and the stationary plug; by comparison, a top-supported reactor vessel (TSRV) is completely supported by the operating floor. The diameter of the reactor vessel (RV) is 12.8 m (42 ft), and the height (distance from the basemat to the operating floor) is 19.8 m (65 ft). The RV is supported by a single support cylinder anchored to the basemat. The core has 210 driver assemblies and 192 radial blanket assemblies in an annular configuration. The primary heat transport system components consist of four intermediate heat exchangers (IHXs), four EMPs, and four primary reactor auxillary cooling systems. All these components are supported by the BSRV and hang from their tops. Six modular, vertically movable UIS mechanisms clear the UIS from the space over the core during refueling. The top closure is designed to operate at the reactor outlet temperature and is free to expand and contract. Small bellows between the top closure and each UIS model accommodate differential movements and comprise a portion of the cover gas boundary. A 1200-MW(electric) plant with two 600-MW(electric) (twin) nuclear steam supply systems is being studied

Vent clearing during a simulated loss-of-coolant accident in Mark I boiling-water-reactor pressure-suppression system

International Nuclear Information System (INIS)

Pitts, J.H.; McCauley, E.W.

1978-01-01

The response of the pressure-suspension containment system of Mark I boiling-water reactors to a loss-of-coolant accident (LOCA) is being studied. This response is a design basis for light-water nuclear reactors. Part of the study is being carried out on a 1 / 5 -scale experimental facility that models the pressure-suppression containment system of the Peach Bottom 2 nuclear power plant. The test series reported here focused on the initial or air-clearing phase of a hypothetical LOCA. Measured forces, measured pressures, and the hydrodynamic phenomena (observed with high-speed cameras) show a logical interrelationship

POLCA-T simulation of OECD/NRC BWR turbine trip benchmark exercise 3 best estimate scenario TT2 test and four extreme scenarios

International Nuclear Information System (INIS)

Panayotov, D.

2004-01-01

Westinghouse transient code POLCA-T brings together the system thermal-hydraulics plant models and the 3D neutron kinetics core model. Code validation plan includes the calculations of Peach Bottom end of cycle 2 turbine trip transients and low-flow stability tests. The paper describes the objectives, method, and results of analyses performed in the final phase of OECD/NRC Peach Bottom 2 Boiling Water Reactor Turbine Trip Benchmark. Brief overview of the code features, the method of simulation, the developed 3D core model and system input deck for Peach Bottom 2 are given. The paper presents the results of benchmark exercise 3 best estimate scenario: coupled 3D core neutron kinetics with system thermal-hydraulics analyses. Performed sensitivity studies cover the SCRAM initiation, carry-under, and decay power. Obtained results including total power, steam dome, core exit, lower and upper plenum, main steam line and turbine inlet pressures showed good agreement with measured plant data Thus the POLCA-T code capabilities for correct simulation of turbine trip transients were proved The performed calculations and obtained results for extreme cases demonstrate the POLCA-T code wide range capabilities to simulate transients when scram, steam bypass, and safety and relief valves are not activated. The code is able to handle such transients even when the reactor power and pressure reach values higher than 600 % of rated power, and 10.8 MPa. (authors)

Preparation of footing bottom of Temelin nuclear powerplant reactors

International Nuclear Information System (INIS)

Vyleta, M.

1988-01-01

The Temelin nuclear power site geologically belongs to the so-called monotonous moldanubium deposit. The site features a range of rocks, from easy to sort out rocks and rocks that can be mined using excavators, to difficult to sort out rocks that are necessary to be broken down, to rocks that are difficult to blast. The table in the main building site area was first lowered by 7 m to a ground elevation of 507.3 m, this in an area of 800x500 m. On the main four production unit sites, the working level of the reactor rooms and the engine rooms was lowered to a ground elevation of 502.3 m. The space of the first main production unit in an area of 70x70 m was excavated down to an elevation of 501.2 m, i.e. 1.1 m above the footing bottom of the first reactor. The technology is described in detail of building the footing bottom, based on the division of the whole area in 70 working fields (7x10 m) in which all working operations proceed in a closed cycle. It was thus guaranteed that the footing bottom would not disturbed with blasting operations or damaged as a result of the movement of building machines and vehicles on exposed rock. (Z.M.). 7 figs., 1 refs

Propagation of void fraction uncertainty measures in the RETRAN-3D simulation of the Peach Bottom turbine trip

International Nuclear Information System (INIS)

Vinai, Paolo; Macian-Juan, Rafael; Chawla, Rakesh

2011-01-01

The paper describes the propagation of void fraction uncertainty, as quantified by employing a novel methodology developed at Paul Scherrer Institut, in the RETRAN-3D simulation of the Peach Bottom turbine trip test. Since the transient considered is characterized by a strong coupling between thermal-hydraulics and neutronics, the accuracy in the void fraction model has a very important influence on the prediction of the power history and, in particular, of the maximum power reached. It has been shown that the objective measures used for the void fraction uncertainty, based on the direct comparison between experimental and predicted values extracted from a database of appropriate separate-effect tests, provides power uncertainty bands that are narrower and more realistic than those based, for example, on expert opinion. The applicability of such an approach to best estimate, nuclear power plant transient analysis has thus been demonstrated.

Operating US power reactors

International Nuclear Information System (INIS)

Silver, E.G.

1988-01-01

This update, which appears regularly in each issue of Nuclear Safety, surveys the operations of those power reactors in the US which have been issued operating licenses. Table 1 shows the number of such reactors and their net capacities as of September 30, 1987, the end of the three-month period covered in this report. Table 2 lists the unit capacity and forced outage rate for each licensed reactor for each of the three months (July, August, and September 1987) covered in this report and the cumulative values of these parameters since the beginning of commercial operation. In addition to the tabular data, this article discusses other significant occurrences and developments that affected licensed US power reactors during this reporting period. Status changes at Braidwood Unit 1, Nine Mile Point 2, and Beaver Valley 2 are discussed. Other occurrences discussed are: retraining of control-room operators at Peach Bottom; a request for 25% power for Shoreham, problems at Fermi 2 which delayed the request to go to 75% power; the results of a safety study of the N Reactor at Hanford; a proposed merger of Pacific Gas and Electric with Sacramento Municipal Utility District which would result in the decommissioning of Rancho Seco; the ordered shutdown of Oyster Creek; a minor radioactivity release caused by a steam generator tube rupture at North Anna 1; and 13 fines levied by the NRC on reactor licensees

Computer simulations of a 1/5-scale experiment of a Mark I boiler water reactor pressure-suppression system under hypothetical LOCA conditions

International Nuclear Information System (INIS)

Edwards, L.L.

1978-01-01

The CHAMP computer code was employed to simulate a plane-geometry cross section of a Mark I boiling water reactor toroidal pressure suppression system air discharge experiment under hypothetical loss-of-coolant accident conditions. The experiments were performed at the Lawrence Livermore Laboratory on a 1 / 5 -scale model of the Peach Bottom Nuclear Power Plant

Medium-size high-temperature gas-cooled reactor

International Nuclear Information System (INIS)

Peinado, C.O.; Koutz, S.L.

1980-08-01

This report summarizes high-temperature gas-cooled reactor (HTGR) experience for the 40-MW(e) Peach Bottom Nuclear Generating Station of Philadelphia Electric Company and the 330-MW(e) Fort St. Vrain Nuclear Generating Station of the Public Service Company of Colorado. Both reactors are graphite moderated and helium cooled, operating at approx. 760 0 C (1400 0 F) and using the uranium/thorium fuel cycle. The plants have demonstrated the inherent safety characteristics, the low activation of components, and the high efficiency associated with the HTGR concept. This experience has been translated into the conceptual design of a medium-sized 1170-MW(t) HTGR for generation of 450 MW of electric power. The concept incorporates inherent HTGR safety characteristics [a multiply redundant prestressed concrete reactor vessel (PCRV), a graphite core, and an inert single-phase coolant] and engineered safety features

Limiting factor analysis of high availability nuclear plants (boiling water reactors). Final report

International Nuclear Information System (INIS)

Frederick, L.G.; Brady, R.M.; Shor, S.W.W.; McCusker, J.T.; Alden, W.M.; Kovacs, S.

1979-08-01

The pertinent results are presented of a 16-month study conducted for Electric Power Research Institute by General Electric Company, Bechtel Power Corporation, and Philadelphia Electric Company. The study centered around the Peach Bottom 2 Atomic Power Station, but also included limited study of operations at 20 additional operating boiling water reactors. The purpose of the study was to identify and evaluate key factors limiting plant availability, and to identify potential improvements for eliminating or alleviating those limitations. The key limiting factors were found to be refueling activities; activities related to the reactor fuel; reactor scrams; activities related to 20 operating systems or major components; delays due to radiation, turbid water during refueling operations, facilities/working conditions, and dirt/foreign material; and general maintenance/repair of valves and piping. Existing programs to reduce the effect on plant unavailability are identified, and suggestions for further action are made

Passive safety features of low sodium void worth metal fueled cores in a bottom supported reactor vessel

International Nuclear Information System (INIS)

Chang, Y.I.; Marchaterre, J.F.; Wade, D.C.; Wigeland, R.A.; Kumaoka, Yoshio; Suzuki, Masao; Endo, Hiroshi; Nakagawa, Hiroshi

1991-01-01

A study has been performed on the passive safety features of low-sodium-void-worth metallic-fueled reactors with emphasis on using a bottom-supported reactor vessel design. The reactor core designs included self-sufficient types as well as actinide burners. The analyses covered the reactor response to the unprotected, i.e. unscrammed, transient overpower accident and the loss-of-flow accident. Results are given demonstrating the safety margins that were attained. 4 refs., 4 figs., 2 tabs

Predictions on an HTR coolant composition after operational experience with experimental reactors

International Nuclear Information System (INIS)

Nieder, R.

1981-01-01

Long-term operational experience of the HTR experimental reactors Dragon (1966 - 1975), Peach Bottom (1967 - 1974) and AVR (since 1967) has yielded a large number of common quantitative and qualitative results about the sources and behaviour of helium impurities in the primary circuits. Additional information has also been obtained from experiments made at the three reactors. The results at the AVR are particularly interesting because the gas outlet temperature can be varied from 770 0 C to 950 0 C when the reactor power is kept constant. Hence they can be studied according to the temperature dependence of all chemical reactions. It should be possible to apply the results from the operating measurements and experiments made at the reactors, in particular the interrelation of the impurity concentrations, to future reactors. The absolute values of these impurity concentrations are obtained first and foremost by the corresponding helium purification constants

Influence of vineyard peach selections on vigour and initial yield in peach and nectarine

Directory of Open Access Journals (Sweden)

Zec Gordan

2013-01-01

Full Text Available Seedlings (progenies of eight selected vineyard peach genotypes obtained by self and open pollination were examined in this study during three consecutive years. Two progenies from unselected vineyard peach genotypes with different geographic origin were used as a standard. Peach cv. Autumn Glo and nectarine cv. Stark Red Gold were grafted on F1 generation of eight vineyard peach selections and two standard progenies. Analysis of variance indicated statistically significant differences in vigour and fruit productivity between fruit trees grafted on different progenies of vineyard peach selections. A high correlation was found between rootstock vigour and fruit production of grafted cultivars. In addition, the principal component analysis made it possible to establish similar groups of rootstocks, depending on its influence to vigour, productivity and indexes of efficiency of grafted peach and nectarine cultivar. The most promising rootstocks for those two cultivars were PSK and 7S because grafted AG and SRG have high fruit weight, initial yields and very satisfactory rootstock, scion and canopy efficiency. [Projekat Ministarstva nauke Republike Srbije, br. TR 31063

Thermalydraulic processes in the reactor coolant system of a BWR under severe accident conditions

International Nuclear Information System (INIS)

Hodge, S.A.

1990-01-01

Boiling water reactors (BWRs) incorporate many unique structural features that make their expected response under severe accident conditions very different from that predicted in the case of pressurized water reactor accident sequences. Automatic main steam isolation valve (MIV) closure as the vessel water level approaches the top of the core would cause reactor vessel isolation while automatic recirculation pump trip would limit the in-vessel flows to those characteristic of natural circulation (as disturbed by vessel relief valve actuation). This paper provides a discussion of the BWR control blade, channel box, core plate, control rod guide tube, and reactor vessel safety relief valve (SRV) configuration and the effects of these structural components upon thermal hydraulic processes within the reactor vessel under severe accident conditions. The dominant BWR severe accident sequences as determined by probabilistic risk assessment are described and the expected timing of events for the unmitigated short-term station blackout severe accident sequence at the Peach Bottom atomic power station is presented

State of development of high temperature gas-cooled reactors in foreign countries

International Nuclear Information System (INIS)

Sudo, Yukio

1990-01-01

Emphasis has been placed in the development of high temperature gas-cooled reactors on high thermal efficiency as power reactors and the reactor from which nuclear heat can be utilized. In U.K., as the international project 'Dragon Project', the experimental Dragon reactor for research use with 20 MWt output and exit coolant temperature 750 deg C was constructed, and operated till 1976. Coated fuel particles were developed. In West Germany, the experimental power reactor AVR with 46 MWt and 15 MWe output was operated till 1988. The prototype power reactor THTR-300 with 300 MWe output and 750 deg C exit temperature is in commercial operation. In USA, the experimental power reactor Peach Bottom reactor with 40 MWe output and 728 deg C exit temperature was operated till 1974. The prototype Fort Saint Vrain power reactor with 330 MWe output and 782 deg C exit temperature was operated till 1989. In USSR, the modular VGM with 200 MWh output is at the planning stage. Also in China, high temperature gas-cooled reactors are at the design stage. Switzerland has taken part in various international projects. (K.I.)

Air scaling and modeling studies for the 1/5-scale mark I boiling water reactor pressure suppression experiment

Energy Technology Data Exchange (ETDEWEB)

Lai, W.; McCauley, E.W.

1978-01-04

Results of table-top model experiments performed to investigate pool dynamics effects due to a postulated loss-of-coolant accident (LOCA) for the Peach Bottom Mark I boiling water reactor containment system guided subsequent conduct of the 1/5-scale torus experiment and provided new insight into the vertical load function (VLF). Pool dynamics results were qualitatively correct. Experiments with a 1/64-scale fully modeled drywell and torus showed that a 90/sup 0/ torus sector was adequate to reveal three-dimensional effects; the 1/5-scale torus experiment confirmed this.

Air scaling and modeling studies for the 1/5-scale mark I boiling water reactor pressure suppression experiment

International Nuclear Information System (INIS)

Lai, W.; McCauley, E.W.

1978-01-01

Results of table-top model experiments performed to investigate pool dynamics effects due to a postulated loss-of-coolant accident (LOCA) for the Peach Bottom Mark I boiling water reactor containment system guided subsequent conduct of the 1/5-scale torus experiment and provided new insight into the vertical load function (VLF). Pool dynamics results were qualitatively correct. Experiments with a 1/64-scale fully modeled drywell and torus showed that a 90 0 torus sector was adequate to reveal three-dimensional effects; the 1/5-scale torus experiment confirmed this

Boiling water reactor turbine trip (TT) benchmark

International Nuclear Information System (INIS)

2005-01-01

In the field of coupled neutronics/thermal-hydraulics computation there is a need to enhance scientific knowledge in order to develop advanced modelling techniques for new nuclear technologies and concepts as well as for current applications. Recently developed 'best-estimate' computer code systems for modelling 3-D coupled neutronics/thermal-hydraulics transients in nuclear cores and for coupling core phenomena and system dynamics (PWR, BWR, VVER) need to be compared against each other and validated against results from experiments. International benchmark studies have been set up for this purpose. The present report is the second in a series of four and summarises the results of the first benchmark exercise, which identifies the key parameters and important issues concerning the thermalhydraulic system modelling of the transient, with specified core average axial power distribution and fission power time transient history. The transient addressed is a turbine trip in a boiling water reactor, involving pressurization events in which the coupling between core phenomena and system dynamics plays an important role. In addition, the data made available from experiments carried out at the Peach Bottom 2 reactor (a GE-designed BWR/4) make the present benchmark particularly valuable. (author)

Variability of vineyard peach tree characteristics

Directory of Open Access Journals (Sweden)

Zec Gordan

2008-01-01

Full Text Available Vineyard peach seedlings are the most important rootstock for peach in Serbia and abroad. High variability is a characteristic of the vineyard peach planting material that is used as rootstock in nursery production. Through work of many years, vineyard peach genotypes with qualitative traits were selected and collected. Seedlings that are progeny of the nine selected genotypes and resulted from self and open pollination were examined. The vineyard peach seedlings resulted from uncontrolled pollination and with different geographical origin served as reference. A goal of research was to get vineyard peach genotypes that would give more uniform generative progeny with qualitative traits. This paper presents the results of two-year research of morphological traits of more than 500 vineyard seedlings. Based on the results, positive genotypes were selected for further inbreeding. Further, the seedlings of the selection 6 have the lowest coefficients of variation for trunk thickness, tree height and number of branches, which points to the self-pollination as a good method for getting more uniform progeny. .

77 FR 51580 - Advisory Committee on Reactor Safeguards; Notice of Meeting

Science.gov (United States)

2012-08-24

... Pike, Rockville, Maryland. Thursday, September 6, 2012, Conference Room T2-B1, 11545 Rockville Pike... p.m.-3:15 p.m.: Selected Chapters of the Safety Evaluation Reports (SERs) with Open Items Associated... and Peach Bottom,'' and (2) NUREG/CR-7040, ``Evaluation of JNES Equipment Fragility Tests for Use in...

Commercial scale irradiation for insect disinfestation preserves peach quality

International Nuclear Information System (INIS)

McDonald, Heather; McCulloch, Mary; Caporaso, Fred; Winborne, Ian; Oubichon, Michon; Rakovski, Cyril; Prakash, Anuradha

2012-01-01

Irradiation is approved as a generic quarantine treatment by the US Department of Agriculture, Animal and Plant Health Inspection Service. Due to the effectiveness of irradiation in controlling insects on commodities, there is a growing need to understand the effects of low dose irradiation on fruit quality. The goal of this study was to determine the sensitivity of peaches (Prunus persica) to irradiation, and secondly, to determine the effect of commercial scale treatment on shelf-life, overall quality and consumer liking. Six varieties of peaches were irradiated in small batches at 0.29, 0.49, 0.69 and 0.90 kGy to observe the sensitivity of peaches at different dose levels. Changes in quality were evaluated by 8 trained panelists using descriptive analysis. Sensory characteristics (color, smoothness, aroma, touch firmness, mouth firmness, graininess, overall flavor and off-flavor) were evaluated at 2–4 day intervals and untreated samples served as control. To simulate commercial treatment, peaches were irradiated in pallet quantities at a target dose level of 0.4 kGy. The average absorbed dose was 0.66 kGy with an average dose uniformity ratio of 1.57. Commercially treated peaches were evaluated by 40–80 untrained consumers for acceptability routinely throughout the shelf life. Titratable acidity, Brix, texture and weight loss were also monitored for both commercial and small scale irradiated peaches. There was no dose effect on TA, Brix and weight loss due to irradiation. Peaches irradiated at 0.69 and 0.90 kGy were darker in flesh color, more juicy and less firm as determined by the trained panel and analytical pressure tests. Commercial scale irradiation did not adversely affect shelf life but was seen to enhance ripening. This, however, was perceived as a positive change by consumers. Overall, consumers rated the acceptability of irradiated peaches higher than untreated peaches. Statistical analysis was performed using linear mixed models to find

Boiling water reactor turbine trip (TT) benchmark

International Nuclear Information System (INIS)

2001-06-01

In the field of coupled neutronics/thermal-hydraulics computation there is a need to enhance scientific knowledge in order to develop advanced modelling techniques for new nuclear technologies and concepts, as well as for current nuclear applications Recently developed 'best-estimate' computer code systems for modelling 3-D coupled neutronics/thermal-hydraulics transients in nuclear cores and for the coupling of core phenomena and system dynamics (PWR, BWR, VVER) need to be compared against each other and validated against results from experiments. International benchmark studies have been set up for the purpose. The present volume describes the specification of such a benchmark. The transient addressed is a turbine trip (TT) in a BWR involving pressurization events in which the coupling between core phenomena and system dynamics plays an important role. In addition, the data made available from experiments carried out at the plant make the present benchmark very valuable. The data used are from events at the Peach Bottom 2 reactor (a GE-designed BWR/4). (authors)

High Temperature Gas-Cooled Reactors Lessons Learned Applicable to the Next Generation Nuclear Plant

Energy Technology Data Exchange (ETDEWEB)

J. M. Beck; L. F. Pincock

2011-04-01

The purpose of this report is to identify possible issues highlighted by these lessons learned that could apply to the NGNP in reducing technical risks commensurate with the current phase of design. Some of the lessons learned have been applied to the NGNP and documented in the Preconceptual Design Report. These are addressed in the background section of this document and include, for example, the decision to use TRISO fuel rather than BISO fuel used in the Peach Bottom reactor; the use of a reactor pressure vessel rather than prestressed concrete found in Fort St. Vrain; and the use of helium as a primary coolant rather than CO2. Other lessons learned, 68 in total, are documented in Sections 2 through 6 and will be applied, as appropriate, in advancing phases of design. The lessons learned are derived from both negative and positive outcomes from prior HTGR experiences. Lessons learned are grouped according to the plant, areas, systems, subsystems, and components defined in the NGNP Preconceptual Design Report, and subsequent NGNP project documents.

Preventive protection device and method for bottom of reactor pressure vessel

International Nuclear Information System (INIS)

Hayashi, Eisaku; Kurosawa, Koichi; Furukawa, Hideyasu; Morinaka, Ren; Enomoto, Kunio; Otaka, Masahiro; Yoshikubo, Fujio; Chiba, Noboru; Sato, Kazunori.

1995-01-01

In a preventive protection device for improving stresses in reactor structural components by jetting highly pressurized water with cavitation bubbles from a jetting nozzle toward structural components in a reactor pressure vessel, a fixed structure to a CRD housing is provided with a rotational body attached to the structure, a multi joint arm and a jetting nozzle supported to the multi joint arm. The jetting nozzle is disposed at a position where the center of the jetting deviates from the center of the CRD housing. In addition, a monitoring camera is disposed for displaying the target for preventive protection. The state of stresses on a plurality of targets for preventive protection can be improved by the preventive protection device at a fixed position in the bottom of a reactor pressure vessel where housings stand densely, thereby enabling to attain the preventive protection operation easily and rapidly. (N.H.)

Regulation of anthocyanin biosynthesis in peach fruits.

Science.gov (United States)

Rahim, Md Abdur; Busatto, Nicola; Trainotti, Livio

2014-11-01

MYB10.1 and MYB10.3, with bHLH3, are the likely regulators of anthocyanin biosynthesis in peach fruit. MYB10.1/2/3 forms a cluster on the same genomic fragment where the Anther color ( Ag ) trait is located. Anthocyanins are bioactive compounds responsible for the pigmentation of many plant parts such as leaves, flowers, fruits and roots, and have potential benefits to human health. In peach [Prunus persica (L.) Batsch], peel color is a key determinant for fruit quality and is regulated by flavonoids including anthocyanins. The R2R3 MYB transcription factors (TFs) control the expression of anthocyanin biosynthetic genes with the help of co-activators belonging to the basic-helix-loop-helix (bHLH) and WD40 repeat families. In the peach genome six MYB10-like and three bHLH-like TFs were identified as candidates to be the regulators of the anthocyanin accumulation, which, in yellow flesh fruits, is highest in the peel, abundant in the part of the mesocarp surrounding the stone and lowest in the mesocarp. The expression of MYB10.1 and MYB10.3 correlates with anthocyanin levels of different peach parts. They also have positive correlation with the expression of key structural genes of the anthocyanin pathway, such as CHS, F3H, and UFGT. Functions of peach MYB10s were tested in tobacco and shown to activate key genes in the anthocyanin pathway when bHLHs were co-expressed as partners. Overexpression of MYB10.1/bHLH3 and MYB10.3/bHLH3 activated anthocyanin production by up-regulating NtCHS, NtDFR and NtUFGT while other combinations were not, or much less, effective. As three MYB10 genes are localized in a genomic region where the Ag trait, responsible for anther pigmentation, is localized, it is proposed they are key determinant to introduce new peach cultivars with higher antioxidant level and pigmented fruit.

Carbon Monoxide Fumigation Improved the Quality, Nutrients, and Antioxidant Activities of Postharvest Peach

Science.gov (United States)

Li, Ying; Pei, Fei

2014-01-01

Peaches (Prunus persica cv. Yanhong) were fumigated with carbon monoxide (CO) at 0, 0.5, 5, 10, and 20 μmol/L for 2 hours. The result showed that low concentration CO (0.5–10 μmol/L) might delay the decrease of firmness and titrable acid content, restrain the increase of decay incidence, and postpone the variation of soluble solids content, but treating peaches with high concentration CO (20 μmol/L) demonstrated adverse effects. Further research exhibited that exogenous CO could induce the phenylalnine ammonialyase activity, maintain nutrient contents such as Vitamin C, total flavonoid, and polyphenol, and enhance antioxidant activity according to reducing power and 2,2-diphenyl-1-(2,4,6-trinitrophenyl) hydrazyl radical scavenging activity. Treating peaches with appropriate concentration CO was beneficial to the quality, nutrients, and antioxidant activity of postharvest peaches during storage time. Therefore, CO fumigation might probably become a novel method to preserve postharvest peach and other fruits in the future. PMID:26904651

Inactivation of contaminated fungi and antioxidant effects of peach (Prunus persica L. Batsch cv Dangeumdo) by 0.5-2 kGy gamma irradiation

Energy Technology Data Exchange (ETDEWEB)

Kim, Kyoung-Hee; Kim, Mi-Seon [Department of Food and Nutrition, Chungnam National University, Daejeon 305-764 (Korea, Republic of); Kim, Hong-Gi [Department of Applied Biology, Chungnam National University, Daejeon 305-764 (Korea, Republic of); Yook, Hong-Sun, E-mail: yhsuny@naver.co [Department of Food and Nutrition, Chungnam National University, Daejeon 305-764 (Korea, Republic of)

2010-04-15

The effect of gamma irradiation (0.5-2 kGy) on the physicochemical properties of peaches was investigated during a 6-day storage at 20+-3 deg. C. Gamma irradiation is able to inactivate the four pathogens, namely Botrytis cinerea, Penicillium expansum, Rhizopus stolonifer var. stolonifer and Monilinia fructicola in peaches. Hardness significantly decreased with the increment of irradiation dose level whereas soluble solid and total polyphenol contents increased with increment of irradiation dose level. 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical-scavenging activity of the irradiated peach was higher than that of control, and its activity increased with increment of irradiation dose level. These results suggest that gamma irradiation of peaches improved antioxidant activity, but dramatically affects the hardness throughout the entire storage time.

Inactivation of contaminated fungi and antioxidant effects of peach (Prunus persica L. Batsch cv Dangeumdo) by 0.5-2 kGy gamma irradiation

International Nuclear Information System (INIS)

Kim, Kyoung-Hee; Kim, Mi-Seon; Kim, Hong-Gi; Yook, Hong-Sun

2010-01-01

The effect of gamma irradiation (0.5-2 kGy) on the physicochemical properties of peaches was investigated during a 6-day storage at 20±3 deg. C. Gamma irradiation is able to inactivate the four pathogens, namely Botrytis cinerea, Penicillium expansum, Rhizopus stolonifer var. stolonifer and Monilinia fructicola in peaches. Hardness significantly decreased with the increment of irradiation dose level whereas soluble solid and total polyphenol contents increased with increment of irradiation dose level. 1,1-diphenyl-2-picrylhydrazyl (DPPH) radical-scavenging activity of the irradiated peach was higher than that of control, and its activity increased with increment of irradiation dose level. These results suggest that gamma irradiation of peaches improved antioxidant activity, but dramatically affects the hardness throughout the entire storage time.

Peach Flower Monitoring Using Aerial Multispectral Imaging

Directory of Open Access Journals (Sweden)

Ryan Horton

2017-01-01

Full Text Available One of the tools for optimal crop production is regular monitoring and assessment of crops. During the growing season of fruit trees, the bloom period has increased photosynthetic rates that correlate with the fruiting process. This paper presents the development of an image processing algorithm to detect peach blossoms on trees. Aerial images of peach (Prunus persica trees were acquired from both experimental and commercial peach orchards in the southwestern part of Idaho using an off-the-shelf unmanned aerial system (UAS, equipped with a multispectral camera (near-infrared, green, blue. The image processing algorithm included contrast stretching of the three bands to enhance the image and thresholding segmentation method to detect the peach blossoms. Initial results showed that the image processing algorithm could detect peach blossoms with an average detection rate of 84.3% and demonstrated good potential as a monitoring tool for orchard management.

Neutron dosimetry in the Three-Mile Island Unit 2 reactor cavity with solid-state track recorders

International Nuclear Information System (INIS)

Gold, R.; Roberts, J.H.; Ruddy, F.H.; Preston, C.C.; McElroy, W.N.; Rao, S.V.; Greenborg, J.; Fricke, V.R.

1986-01-01

Solid-state track recorder (SSTR) neutron dosimetry has been conducted in the Three-Mile Island Unit 2 (TMI-2) reactor cavity, for nondestructive assessment of the fuel distribution. Two axial stringers were deployed in the annular gap with 17 SSTR dosimeters located on each stringer. SSTR experimental results reveal that neutron streaming, upward from the bottom of the reactor cavity region, dominates the observed neutron intensity. These absolute thermal neutron flux observations are consistent with the presence of a significant amount of fuel debris lying at the bottom of the reactor vessel. A conservative lower bound estimated from these SSTR data implies that at least 2 tonnes of fuel, which is roughly 4 fuel assemblies, is lying at the bottom of the vessel. This existence of significant neutron streaming also explains the high count rate observed with the source range monitors that are located in the TMI-2 reactor cavity. (author)

Population survey of phytoseiid mites and spider mites on peach leaves and wild plants in Japanese peach orchard.

Science.gov (United States)

Wari, David; Yamashita, Jun; Kataoka, Yoko; Kohara, Yoko; Hinomoto, Norihide; Kishimoto, Hidenari; Toyoshima, Shingo; Sonoda, Shoji

2014-07-01

A population survey of phytoseiid mites and spider mites was conducted on peach leaves and wild plants in Japanese peach orchards having different pesticide practices. The phytoseiid mite species composition on peach leaves and wild plants, as estimated using quantitative sequencing, changed during the survey period. Moreover, it varied among study sites. The phytoseiid mite species compositions were similar between peach leaves and some wild plants, such as Veronica persica, Paederia foetida, Persicaria longiseta, and Oxalis corniculata with larger quantities of phytoseiid mites, especially after mid-summer. A PCR-based method to detect the ribosomal ITS sequences of Tetranychus kanzawai and Panonychus mori from phytoseiid mites was developed. Results showed that Euseius sojaensis (specialized pollen feeder/generalist predator) uses both spider mites as prey in the field.

Solid-state track recorder neutron dosimetry in the Three-Mile Island Unit-2 reactor cavity

International Nuclear Information System (INIS)

Gold, R.; Roberts, J.H.; Ruddy, F.H.; Preston, C.C.; McElroy, W.N.

1985-04-01

Solid-state track recorder (SSTR) neutron dosimetry has been conducted in the Three-Mile Island Unit (TMI-2) reactor cavity (i.e., the annular gap between the pressure vessel and the biological shield) for nondestructive assessment of the fuel distribution. Two axial stringers were deployed in the annular gap with 17 SSTR dosimeters located on each stringer. SSTR experimental results reveal that neutron streaming, upward from the bottom of the reactor cavity region, dominates the observed neutron intensity. These absolute thermal neutron flux observations are consistent with the presence of a significant amount of fuel debris lying at the bottom of the reactor vessel. A conservative lower bound estimated from these SSTR data implies that there are at least 2 tonnes of fuel, which is roughly 4 fuel assemblies, at the bottom of the vessel. The existence of significant neutron streaming also explains the high count rate observed with the source range monitors (SRMs) that are located in the TMI-2 reactor cavity

Consumer peach preferences and purchasing behavior: a mixed methods study.

Science.gov (United States)

Kelley, Kathleen M; Primrose, Rachel; Crassweller, Robert; Hayes, John E; Marini, Richard

2016-05-01

Peaches (Prunus persica (L.) Stokes) are grown in several regions throughout the USA, are eaten fresh, and used as ingredients in value-added processed products. An Internet survey was conducted to investigate Mid-Atlantic consumers' fresh and processed peach purchasing behaviors, and whether packaging certain numbers of peaches together, providing information about nutritional content, and other factors would increase purchases. Additionally, laboratory-based sensory testing was used to better understand peel color, texture, sweetness, sourness, and flavor preferences for cultivars commonly grown in the Mid-Atlantic region. Irrespective of fresh peach consumption frequency, certain value-added products were of interest. For some products, interest in purchasing was higher than reported purchasing behavior. Preference for certain fresh peach characteristics, such as peel color, differed between less frequent fresh peach consumers and those who consumed fresh peaches more often. Of the four peach cultivars included in the sensory test, most were liked; however, there were some cultivar differences pertaining to color, texture, sweetness, tartness, and flavor liking. Potential marketing strategies can be developed based on frequency of fresh peach consumption and household demographics. Data can be used to select peaches that best appeal to consumers. © 2015 Society of Chemical Industry. © 2015 Society of Chemical Industry.

Neutron dosimetry in the Three-Mile Island Unit 2 reactor cavity with solid-state track recorders

International Nuclear Information System (INIS)

Gold, R.; Roberts, J.H.; Ruddy, F.H.; Preston, C.C.; McElroy, W.N.; Rao, S.V.; Greenborg, J.; Fricke, V.R.

1985-01-01

Solid-state track recorder (SSTR) neutron dosimetry has been conducted in the Three-Mile Island Unit 2 (TMI-2) reactor cavity (i.e., the annular gap between the pressure vessel and the biological shield) for nondestructive assessment of the fuel distribution. Two axial stringers were deployed in the annular gap with 17 SSTR dosimeters located on each stringer. SSTR experimental results reveal that neutron streaming, upward from the bottom of the reactor cavity region, dominates the observed neutron intensity. These absolute thermal neutron flux observations are consistent with the presence of a significant amount of fuel debris lying at the bottom of the reactor vessel. A conservative lower bound estimated from these SSTR data implies that at least 2 tonnes of fuel, which is roughly 4 fuel assemblies, is lying at the bottom of the vessel. The existence of significant neutron streaming also explains the high count rate observed with the source range monitors (SRMs) that are located in the TMI-2 reactor cavity

Genetic dissection of Sharka disease tolerance in peach (P. persica L. Batsch).

Science.gov (United States)

Cirilli, Marco; Rossini, Laura; Geuna, Filippo; Palmisano, Francesco; Minafra, Angelantonio; Castrignanò, Tiziana; Gattolin, Stefano; Ciacciulli, Angelo; Babini, Anna Rosa; Liverani, Alessandro; Bassi, Daniele

2017-11-03

Plum pox virus (PPV), agent of Sharka disease, is the most important quarantine pathogen of peach (P. persica L. Batsch). Extensive evaluation of peach germplasm has highlighted the lack of resistant sources, while suggesting the presence of a quantitative disease resistance, expressed as reduction in the intensity of symptoms. Unravelling the genetic architecture of peach response to PPV infection is essential for pyramiding resistant genes and for developing more tolerant varieties. For this purpose, a genome-wide association (GWA) approach was applied in a panel of accessions phenotyped for virus susceptibility and genotyped with the IPSC peach 9 K SNP Array, and coupled with an high-coverage resequencing of the tolerant accession 'Kamarat'. Genome-wide association identified three highly significant associated loci on chromosome 2 and 3, accounting for most of the reduction in PPV-M susceptibility within the analysed peach population. The exploration of associated intervals through whole-genome comparison of the tolerant accession 'Kamarat' and other susceptible accessions, including the PPV-resistant wild-related species P. davidiana, allow the identification of allelic variants in promising candidate genes, including an RTM2-like gene already characterized in A. thaliana. The present study is the first effort to identify genetic factors involved in Sharka disease in peach germplasm through a GWA approach. We provide evidence of the presence of quantitative resistant loci in a collection of peach accessions, identifying major loci and highly informative SNPs that could be useful for marker assisted selection. These results could serve as reference bases for future research aimed at the comprehension of genetic mechanism regulating the complex peach-PPV interaction.

Atmospheric fluoride levels in some Ontario peach orchards

Energy Technology Data Exchange (ETDEWEB)

Drowley, W B; Rayner, A C; Jephcott, C M

1963-10-01

As a result of suture injury to peaches, a survey was taken to determine monthly atmospheric fluoride levels in the soft fruit-growing area of the Niagara Peninsula of Ontario. Although the injury was confined to a few orchards, it was found necessary to locate stations for fluoride sampling over a wide area. The limed-paper candle method was used for fluoride collection. Unwashed and washed peach leaves were analyzed for fluoride content. Fluoride was separated from all samples by the Willard-Winter distillation procedure and estimated colorimetrically. It was found that a general background level of atmospheric fluoride existed in the whole surveyed area and that the levels were highest in and near the area of peach injury. The fluoride content of peach leaves was also highest in this area. The coincidence of high fluoride levels and suture injury to peaches suggests that atmospheric fluoride was the causal agent. When lime sprays were applied to peach trees in the damaged area, a reduction in the incidence of suture injury was observed.

Sensory profile of eleven peach cultivars

Directory of Open Access Journals (Sweden)

Francine Lorena Cuquel

2012-03-01

Full Text Available The goal of this study was to evaluate the sensory profile of eleven peach cultivars grown in an experimental orchard located in the city of Lapa (PR, Brazil in two seasons. The peach cultivars analyzed were Aurora I, Chimarrita, Chiripá, Coral, Eldorado, Granada, Leonense, Maciel, Marli, Premier, and Vanguarda. The sensory analysis was performed by previously trained panelists; 20 of them in the first season and 10 in the second season. The sensory evaluation was performed using Quantitative Descriptive Analysis, in which the following attributes were measured: appearance, aroma, flesh color, flesh firmness, flavor, and juiciness. The results showed preference for sweet, soft, and juicy fruits. Chimarrita, Chiripá, and Coral fruits showed better sensorial performance than the other peach cultivars. It was also verified that the analysis of the attributes aroma, flesh firmness, and flavor is enough for performing the sensory profile of peach fruits for in natura consumption.

PeachVar-DB: A Curated Collection of Genetic Variations for the Interactive Analysis of Peach Genome Data.

Science.gov (United States)

Cirilli, Marco; Flati, Tiziano; Gioiosa, Silvia; Tagliaferri, Ilario; Ciacciulli, Angelo; Gao, Zhongshan; Gattolin, Stefano; Geuna, Filippo; Maggi, Francesco; Bottoni, Paolo; Rossini, Laura; Bassi, Daniele; Castrignanò, Tiziana; Chillemi, Giovanni

2018-01-01

Applying next-generation sequencing (NGS) technologies to species of agricultural interest has the potential to accelerate the understanding and exploration of genetic resources. The storage, availability and maintenance of huge quantities of NGS-generated data remains a major challenge. The PeachVar-DB portal, available at http://hpc-bioinformatics.cineca.it/peach, is an open-source catalog of genetic variants present in peach (Prunus persica L. Batsch) and wild-related species of Prunus genera, annotated from 146 samples publicly released on the Sequence Read Archive (SRA). We designed a user-friendly web-based interface of the database, providing search tools to retrieve single nucleotide polymorphism (SNP) and InDel variants, along with useful statistics and information. PeachVar-DB results are linked to the Genome Database for Rosaceae (GDR) and the Phytozome database to allow easy access to other external useful plant-oriented resources. In order to extend the genetic diversity covered by the PeachVar-DB further, and to allow increasingly powerful comparative analysis, we will progressively integrate newly released data. © The Author 2017. Published by Oxford University Press on behalf of Japanese Society of Plant Physiologists. All rights reserved. For permissions, please email: journals.permissions@oup.com.

Multiple R2R3-MYB transcription factors involved in the regulation of anthocyanin accumulation in peach flower

Directory of Open Access Journals (Sweden)

Hui Zhou

2016-10-01

Full Text Available Anthocyanin accumulation is responsible for flower coloration in peach. Here, we report the identification and functional characterization of eight flavonoid-related R2R3-MYB transcription factors, designated PpMYB10.2, PpMYB9, PpMYBPA1, Peace, PpMYB17, PpMYB18, PpMYB19 and PpMYB20, respectively, in peach flower transcriptome. PpMYB10.2 and PpMYB9 are able to activate transcription of anthocyanin biosynthetic genes, whilst PpMYBPA1 and Peace have a strong activation on the promoters of proanthocyanin (PA biosynthetic genes. PpMYB17-20 show a strong repressive effect on transcription of flavonoid pathway genes such as DFR. These results indicate that anthocyanin accumulation in peach flower is coordinately regulated by a set of R2R3-MYB genes. In addition, PpMYB9 and PpMYB10.2 are closely related but separated into two groups, designated MYB9 and MYB10, respectively. PpMYB9 shows a strong activation on the PpUGT78A2 promoter, but with no effect on the promoter of PpUGT78B (commonly called PpUFGT in previous studies. In contrast, PpMYB10.2 is able to activate the PpUFGT promoter, but not for the PpUGT78A2 promoter. Unlike the MYB10 gene that is universally present in plants, the MYB9 gene is lost in most dicot species. Therefore, the PpMYB9 gene represents a novel group of anthocyanin-related MYB activators, which may have diverged in function from the MYB10 genes. Our study will aid in understanding the complex mechanism regulating floral pigmentation in peach and functional divergence of the R2R3-MYB gene family in plants.

Evaluation of a severe accident management strategy for boiling water reactors -- Drywell flooding

International Nuclear Information System (INIS)

Yu, D.; Xing, L.; Kastenberg, W.E.; Okrent, D.

1994-01-01

Flooding of the drywell has been suggested as a strategy to prevent reactor vessel and containment failure in boiling water reactors. To evaluate the candidate strategy, this study considers accident management as a decision problem (''drywell flooding'' versus ''do nothing'') and develops a decision-oriented framework, namely, the influence diagram approach. This analysis chooses the long-term station blackout sequence for a Mark 1 nuclear power plant (Peach Bottom), and an influence diagram with a single decision node is constructed. The node probabilities in the influence diagram are obtained from US Nuclear Regulatory Commission reports or estimated by probabilistic risk assessment methodology. In assessing potential benefits compared with adverse effects, this analysis uses two consequence measures, i.e., early and late fatalities, as decision criteria. The analysis concludes that even though potential adverse effects exist, such as ex-vessel steam explosions and containment isolation failure, the drywell flooding strategy is preferred to ''do nothing'' when evaluated in terms of these consequence measures

Temperature field in the bottom of concrete reactor vessel; Temperaturno polje u podu betonskog reaktorskog suda

Energy Technology Data Exchange (ETDEWEB)

Jovasevic, V; Tosic, D; Zaric, S; Maksimovic, Lj [Boris Kidric Institute of nuclear sciences, Vinca, Belgrade (Yugoslavia)

1969-07-01

This paper contains detailed scheme of reactor bottom vessel made of concrete and the results of calculated relevant temperature distribution. Method applied for calculation is described taking into account all relevant factors and assuming that thermal conductivity of concrete is homogeneous and independent of temperature.

Turbine trip transient analysis in peach bottom NPP with TRAC-BF1 code and Simtab-1D methodology

International Nuclear Information System (INIS)

Barrachina, T.; Miro, R.; Verdu, G.; Collazo, I.; Gonzalez, P.; Concejal, A.; Ortego, P.; Melara, J.

2010-01-01

In TRAC-BF1 nuclear cross-sections are specified in the input deck in as a polynomial expansion. Therefore, it is necessary to obtain the coefficients of this polynomial function. One of the methods proposed in the literature is the KINPAR methodology. This methodology uses the results from different perturbations of the original state to obtain the coefficients of the polynominal expansion. The simulations are performed using the SIMULATE3 code. In this work, a new methodology to obtain the cross-sections set in 1D is presented. The first step consists of the application of the SIMTAB methodology, developed in UPV, to obtain the 3D cross-sections sets from CASMO4/SIMULATE3. These 3D cross-sections sets are collapsed to 1D, using as a weighting factor the 3D thermal and rapid neutron fluxes obtained from SIMULATE3. The 1D cross-sections obtained are in the same format as the 3D sets, hence, it has been necessary to modify the TRAC-BF1 code in order to be able to read and interpolate between these tabulated 1D cross-sections. With this new methodology it is not necessary to perform simulations of different perturbations of the original state, and also the variation range of the moderator density can be higher than using the former KINPAR methodology. This is important for simulating severe accidents in which the variables vary in a wide range. This new methodology is applied to the simulation of the turbine trip transient Benchmark in Peach Bottom NPP using the TRAC-BF1 code. The results of the transient simulation in TRAC-BF1 using the KINPAR methodology and the new methodology, SIMTAB-1D, are compared. (author)

Cylinder-type bottom reflector

International Nuclear Information System (INIS)

Elter, C.; Fritz, R.; Kissel, K.F.; Schoening, J.

1982-01-01

Proposal of a bottom reflector for gas-cooled nuclear reactor plants with a pebble bed of spherical fuel elements, where the horizontal forces acting from the core and the bottom reflector upon the side reflector are equally distributed. This is attained by the upper edge of the bottom reflector being placed levelly and by the angle of inclination of the recesses varying. (orig.) [de

Apple and peach consumption habits across European countries.

Science.gov (United States)

Konopacka, D; Jesionkowska, K; Kruczyńska, D; Stehr, R; Schoorl, F; Buehler, A; Egger, S; Codarin, S; Hilaire, C; Höller, I; Guerra, W; Liverani, A; Donati, F; Sansavini, S; Martinelli, A; Petiot, C; Carbó, J; Echeverria, G; Iglesias, I; Bonany, J

2010-12-01

The aim of this study was to gain information concerning apple and peach consumption frequency within different European countries in relation to age and gender. The survey was a part of a complex experiment with the aim of evaluating consumers' preferences towards new varieties, and the data is based on the self-reported declarations of respondents, male and female, between 15 and 70 years old. 4271 consumers from 7 European countries were invited to supply information about their apple consumption habits, whereas 499 respondents from 5 countries answered questions relating to frequency of peach and nectarine consumption. In both, the apple and the peach surveys, data analysis of declared intake showed significant differences between nationalities. The highest apple consumption was in Poland, where over 55% declared a consumption of more than 5 apples per week. In comparison, Italian consumers most often indicated eating 3-5 apples per week (39.3%). The lowest apple consumption was in the Netherlands and Spain. In the case of peaches, the highest consumption was indicated in France where 48% of respondents declared a peach consumption of 3-5 per week with 40% eating more than 5 fruits per week. The lowest peach intake was declared in Germany. Irrespective of country women were shown to eat more apples that men. Furthermore, the group of older people (61-70 years) consume apples more often than the adult group (36-60), while within the youngest group of consumers (16-35) eating apples was not at all popular. As with apples females declared a higher peach consumption, and again significantly lower fruit consumption by the youngest group (16-35) was indicated. Although the availability of fruit at the market remains a prime factor in determining apple and peach consumption, our survey confirmed the trends of declining this popular fruit intake by the younger generation, as well as the persistent tendency of lower frequency of fruit consumption among men than women

Physicochemical, antioxidant, and sensorial properties of peach ...

African Journals Online (AJOL)

Preparation of varieties of processed peach products could be a good option to supply in lean season. Objective of the study was to assess the quality characteristics of peach snacks prepared from 11 different cultivars. We investigated the physicochemical (soluble solid, titratable acidity, hardness and dry yield), antioxidant ...

A seismic performance and cost comparison of top and bottom supported liquid metal reactor vessels

International Nuclear Information System (INIS)

Carlson, T.M.; Kiciman, O.K.; Petrozelli, J.F.

1989-01-01

It is the premise of this paper that the revision of a pool LMR from a TSRV configuration to a specific bottom supported reactor vessel (BSRV) configuration can resolve the above TSRV disadvantages related to load path length and diversity, thereby improving seismic performance and simultaneously reducing RV block costs by reducing weights. This paper demonstrates this premise by comparing a reference TSRV block with a specific BSRV block design. Recent capital cost estimates ($/kWe) for U.S. liquid metal reactor (LMR) plant designs reveal that the balance of plant costs could be reduced below that of the balance of plant costs for a comparable light water reactor plant. However, in regions of high seismicity, non-seismically isolated LMR nuclear steam supply system weights are costs per kWe are two to three times the weights and costs of light water reactor nuclear steam supply systems. While all portions of the LMR nuclear steam supply system require examination for potential cost reductions, the focus of this paper is the reactor vessel (RV) block for a large pool plant

Fungicide efficacy in peach rusty spot control in Serbia

OpenAIRE

Dolovac Nenad; Miletić Novica; Aleksić Goran; Savić Dušan; Živković Svetlana; Trkulja Nenad; Bulajić Aleksandra

2010-01-01

Rusty Spot has long been known as a harmful peach disease in many parts of the world. During the past several years, rusty spot infection of the late-maturing peach cultivars (Summerset, Suncrest, Fayette and O’Henry) caused significant yield losses in Serbia. Although the etiology of the disease is still unknown, there are numerous studies attempting to set a strategy for its control and recommend appropriate chemical and other peach protection methods. Ho...

Modified atmosphere packaging extending the storage life of 'douradão' peach

Directory of Open Access Journals (Sweden)

Ligia Regina Radomille de Santana

2010-12-01

Full Text Available 'Douradão' peach is a perishable product and when cold stored is subject to chilling injury. The objective of the experiment was to evaluate the effect of modified atmosphere packaging (MAP and cold storage on quality and storage life of these peaches. Fruits were packed in polypropylene (PP trays and placed inside low density polyethylene (LDPE bags (30, 50, 60, 75 μm thickness with active modified atmosphere (10 kPa CO2 + 1.5kPa O2, balance N2. The control was made with peaches held in nonwrapped PP trays. Fruits were kept at 1 ± 1 °C and 90 ± 5% relative humidity (RH for 28 days and CO2 and O2 within packages was monitored every two days. After 14, 21 and 28 days, samples were withdrawn from MAP and kept in air at 25 ± 1 °C and 90 ± 5% RH for ripening. On the day of removal from the cold storage and after 4 days, peaches were evaluated for weight loss, decay incidence, flesh firmness, woolliness incidence, soluble solids content (SSC, titratable acidity (TA and juice content. The results showed that MAP had influence on reducing weight loss and prevented postharvest decay. MAP of 1-2 kPa O2 and 3-6 kPa CO2 at 1 °C (from 50 and 60 μm LDPE films were effective for keeping good quality of 'Douradão' peaches during 28 days of storage, the ripe fruits showed reduced incidence of woolliness, adequate juiciness and flesh firmness. Packages of 30 and 75 μm LDPE films were ineffective for reducing woolliness during cold storage. MAP fruits showed lower SSC and no relevant effect on TA. Control fruits did not present marketable conditions after 14 days of cold storage.

The Bottom supported fast breeder reactor vessel - an alternative approach to seismic accommodation and reduced cost

International Nuclear Information System (INIS)

Nakagawa, H.; Golan, S.; Petrozelli, J.; Kumaoka, Y.; Kawamura, Y.

1988-01-01

Most FBR vessels are supported by hanging from their top portions. A disadvantage of such a top supported reactor vessel (TSRV) structural configuration is that it may generate high reactor core accelerations. This is due to the long path the seismic vibrations must travel from the basemat up through the building and then down through the RV block to the core. To compensate for this disadvantage, TSRV blocks are often strengthened beyond what is required for other considerations, such as pressure, to satisfy seismic response criteria, thus increasing weights and costs. In addition to long load paths, TSRVs also have common load paths. For example, in a TSRV (with the core supported from the bottom of the RV) the sodium and core loads both travel along the RV pressure boundary. Therefore, one of these loads will likely control the RV thickness leaving excess margin for the other loads. It is the premise of this paper that the revision of a large pool FBR from a TSRV configuration to a specific bottom supported reactor vessel (BSRV) configuration can resolve the above TSRV disadvantages related to load path length and diversity, thereby improving seismic performance and simultaneously reducing RV block costs by reducing weights. This paper demonstrates this premise by comparing a reference TSRV block with a specific BSRV block design

Self-compatible peach (Prunus persica) has mutant versions of the S haplotypes found in self-incompatible Prunus species.

Science.gov (United States)

Tao, Ryutaro; Watari, Akiko; Hanada, Toshio; Habu, Tsuyoshi; Yaegaki, Hideaki; Yamaguchi, Masami; Yamane, Hisayo

2007-01-01

This study demonstrates that self-compatible (SC) peach has mutant versions of S haplotypes that are present in self-incompatible (SI) Prunus species. All three peach S haplotypes, S (1), S (2), and S (2m), found in this study encode mutated pollen determinants, SFB, while only S (2m) has a mutation that affects the function of the pistil determinant S-RNase. A cysteine residue in the C5 domain of the S (2m)-RNase is substituted by a tyrosine residue, thereby reducing RNase stability. The peach SFB mutations are similar to the SFB mutations found in SC haplotypes of sweet cherry (P. avium) and Japanese apricot (P. mume). SFB (1) of the S (1) haplotype, a mutant version of almond (P. dulcis) S (k) haplotype, encodes truncated SFB due to a 155 bp insertion. SFB (2) of the S (2) and S (2m) haplotypes, both of which are mutant versions of the S (a) haplotype in Japanese plum (P. salicina), encodes a truncated SFB due to a 5 bp insertion. Thus, regardless of the functionality of the pistil determinant, all three peach S haplotypes are SC haplotypes. Our finding that peach has mutant versions of S haplotypes that function in almond and Japanese plum, which are phylogenetically close and remote species, respectively, to peach in the subfamily Prunoideae of the Roasaceae, provides insight into the SC/SI evolution in Prunus. We discuss the significance of SC pollen part mutation in peach with special reference to possible differences in the SI mechanisms between Prunus and Solanaceae.

Peach and apricot stone combustion in a bubbling fluidized bed

Energy Technology Data Exchange (ETDEWEB)

Kaynak, B.; Atimtay, Aysel T. [Department of Environmental Engineering, Middle East Technical University, Ankara 06531 (Turkey); Topal, H. [Department of Mechanical Engineering, Engineering and Architecture Faculty, Gazi University, Ankara 06570 (Turkey)

2005-07-25

In this study, a bubbling fluidized bed combustor (BFBC) of 102 mm inside diameter and 900 mm height was used to investigate the combustion characteristics of peach and apricot stones produced as a waste from the fruit juice industry. A lignite coal was also burned in the same combustor. The combustion characteristics of the wastes were compared with that of a lignite coal that is most widely used in Turkey. On-line concentrations of O{sub 2}, CO, CO{sub 2}, SO{sub 2}, NO{sub X} and total hydrocarbons (C{sub m}H{sub n}) were measured in the flue gas during combustion experiments. By changing the operating parameters (excess air ratio, fluidization velocity, and fuel feed rate), the variation of emissions of various pollutants was studied. Temperature distribution along the bed was measured with thermocouples. During the combustion tests, it was observed that the volatile matter from peach and apricot stones quickly volatilizes and mostly burn in the freeboard. The temperature profiles along the bed and the freeboard also confirmed this phenomenon. It was found that as the volatile matter of fruit stones increases, the combustion takes place more in the freeboard region. The results of this study have shown that the combustion efficiencies ranged between 98.8% and 99.1% for coal, 96.0% and 97.5% for peach stone and 93.4% and 96.3% for apricot stones. The coal has zero CO emission, but biomass fuels have very high CO emission which indicates that a secondary air addition is required for the system. SO{sub 2} emission of the coal is around 2400-2800 mg/Nm{sup 3}, whereas the biomass fuels have zero SO{sub 2} emission. NO{sub x} emissions are all below the limits set by the Turkish Air Quality Control Regulation of 1986 (TAQCR) for all tests. As the results of combustion of two biomass fuels are compared with each other, peach stones gave lower CO and NO{sub x} emissions but the SO{sub 2} emissions are a little higher than for apricot stones. These results suggest that

Morphological and genetic perspectives of peach fruit responses to spring frost

Science.gov (United States)

Spring frost is one of the most unpredictable cropping factors in many peach production areas. A severe spring frost can wipe out an entire peach crop whereas a mild spring frost may naturally help thinning as is common practice in commercial peach production. The extent of frost damage depends on t...

Inoculation methods and aggressiveness of five Fusarium species against peach palm

Directory of Open Access Journals (Sweden)

Tiago Miguel Jarek

2018-04-01

Full Text Available ABSTRACT: Fusarium wilt is a major disease which affects peach palm (Bactris gasipaes Kunth.var gasipaes Henderson. This study aimed to evaluate inoculation methods and aggressiveness of isolates of five Fusarium species on peach palm. Fusarium proliferatum can infect the leaves, stem, and roots of peach palm. F. proliferatum, F. oxysporum species complex (FOSC, F. verticillioides, F. solani species complex (FSSC, and Gibberella fujikuroi species complex (GFSC are pathogenic to peach palm. The use of Fusarium-colonized ground corn for root inoculation was effective and reduced the level of damage to plants.

Low dose UV and gamma radiation on storage rot and physicochemical changes in peaches

International Nuclear Information System (INIS)

Lu, J.Y.; Lukombo, S.M.; Stevens, C.; Khan, V.A.; Wilson, C.L.; Pusey, P.L.; Chaultz, E.

1993-01-01

Peach fruit were irradiated with 7.5 x 10(4) ergs/mm(2) of UV (254nm) or 0.1 kGy gamma rays or a combination of both, then stored at 16C for 21 days. The results showed that both UV and gamma rays reduced storage rot and delayed ripening. UV treated peaches had lower sugar concentration, total phenols, anthocyanins and lower weight loss than the gamma treated peaches. The combination of UV and gamma showed no advantage over the use of UV or gamma alone

A new small modular high-temperature gas-cooled reactor plant concept based on proven technology

International Nuclear Information System (INIS)

McDonald, C.F.; Goodjohn, A.J.

1982-01-01

Based on the established and proven high-temperature gas-cooled reactor (HTGR) technologies from the Peach Bottom 1 and Fort St. Vrain utility-operated units, a new small modular HTGR reactor is currently being evaluated. The basic nuclear reactor heat source, with a prismatic core, is being designed so that the decay heat can be removed by passive means (i.e., natural circulation). Although this concept is still in the preconceptual design stage, emphasis is being placed on establishing an inherently safe or benign concept which, when engineered, will have acceptable capital cost and power generation economics. The proposed new HTGR concept has a variety of applications, including electrical power generation, cogeneration, and high-temperature process heat. This paper discusses the simplest application, i.e., a steam Rankine cycle electrical power generating version. The gas-cooled modular reactor concepts presented are based on a graphite moderated prismatic core of low-power density (i.e., 4.1 W/cm 3 ) with a thermal rating of 250 MW(t). With the potential for inherently safe characteristics, a new small reactor could be sited close to industrial and urban areas to provide electrical power and thermal heating needs (i.e., district and space heating). Incorporating a multiplicity of small modular units to provide a larger power output is also discussed. The potential for a small, inherently safe HTGR reactor concept is highlighted

Role of Melatonin in Cell-Wall Disassembly and Chilling Tolerance in Cold-Stored Peach Fruit.

Science.gov (United States)

Cao, Shifeng; Bian, Kun; Shi, Liyu; Chung, Hsiao-Hang; Chen, Wei; Yang, Zhenfeng

2018-06-06

Melatonin reportedly increases chilling tolerance in postharvest peach fruit during cold storage, but information on its effects on cell-wall disassembly in chilling-injured peaches is limited. In this study, we investigated the role of cell-wall depolymerization in chilling-tolerance induction in melatonin-treated peaches. Treatment with 100 μM melatonin alleviated chilling symptoms (mealiness) characterized by a decrease in fruit firmness and increase in juice extractability in treated peaches during storage. The loss of neutral sugars, such as arabinose and galactose, in both the 1,2-cyclohexylenedinitrilotetraacetic acid (CDTA)- and Na 2 CO 3 -soluble fractions was observed at 7 days in treated peaches, but the contents increased after 28 days of storage. Atomic-force-microscopy (AFM) analysis revealed that the polysaccharide widths in the CDTA- and Na 2 CO 3 -soluble fractions in the treated fruit were mainly distributed in a shorter range, as compared with those in the control fruit. In addition, the expression profiles of a series of cell-wall-related genes showed that melatonin treatment maintained the balance between transcripts of PpPME and PpPG, which accompany the up-regulation of several other genes involved in cell-wall disassembly. Taken together, our results suggested that the reduced mealiness by melatonin was probably associated with its positive regulation of numerous cell-wall-modifying enzymes and proteins; thus, the depolymerization of the cell-wall polysaccharides in the peaches treated with melatonin was maintained, and the treated fruit could soften gradually during cold storage.

Feeding behavior of lambs fed diets containing peach palm meal

Directory of Open Access Journals (Sweden)

Alana Batista dos Santos

2016-06-01

Full Text Available The aim of this study was to evaluate the feeding behavior of lambs fed diets containing peach palm meal replacing maize (0, 10, 40, 60, and 85% DM. Thirty Santa Inês sheep with an average initial body weight of 21.6 ± 0.87 kg were distributed in a completely randomized design with five diets and six replicates. Feeding time in min kg–1 DM and min kg–1 NDFap increased by 34 min and 99.6 min, respectively, with each level of substitution of maize for the peach palm meal. Rumination and chewing times, in min kg–1 DM and min kg–1 NDF, also increased in response to the substitution of maize for peach palm meal. When expressed in min day–1, rumination and chewing activities decreased by 12.4 and 14.6 min, respectively, as the amount of peach palm meal in the concentrate was increased. The time spent idle increased linearly (P < 0.05, by 14.6 min day–1, with the replacement levels, compared with the control diet. Peach palm meal in the composition of sheep diets reduces the intakes of dry matter and fiber and decreases the feed and rumination efficiencies. Replacing maize by peach palm meal increases the feeding time and rumination and chewing activities of feedlot lambs.

Candidate gene database and transcript map for peach, a model species for fruit trees.

Science.gov (United States)

Horn, Renate; Lecouls, Anne-Claire; Callahan, Ann; Dandekar, Abhaya; Garay, Lilibeth; McCord, Per; Howad, Werner; Chan, Helen; Verde, Ignazio; Main, Doreen; Jung, Sook; Georgi, Laura; Forrest, Sam; Mook, Jennifer; Zhebentyayeva, Tatyana; Yu, Yeisoo; Kim, Hye Ran; Jesudurai, Christopher; Sosinski, Bryon; Arús, Pere; Baird, Vance; Parfitt, Dan; Reighard, Gregory; Scorza, Ralph; Tomkins, Jeffrey; Wing, Rod; Abbott, Albert Glenn

2005-05-01

Peach (Prunus persica) is a model species for the Rosaceae, which includes a number of economically important fruit tree species. To develop an extensive Prunus expressed sequence tag (EST) database for identifying and cloning the genes important to fruit and tree development, we generated 9,984 high-quality ESTs from a peach cDNA library of developing fruit mesocarp. After assembly and annotation, a putative peach unigene set consisting of 3,842 ESTs was defined. Gene ontology (GO) classification was assigned based on the annotation of the single "best hit" match against the Swiss-Prot database. No significant homology could be found in the GenBank nr databases for 24.3% of the sequences. Using core markers from the general Prunus genetic map, we anchored bacterial artificial chromosome (BAC) clones on the genetic map, thereby providing a framework for the construction of a physical and transcript map. A transcript map was developed by hybridizing 1,236 ESTs from the putative peach unigene set and an additional 68 peach cDNA clones against the peach BAC library. Hybridizing ESTs to genetically anchored BACs immediately localized 11.2% of the ESTs on the genetic map. ESTs showed a clustering of expressed genes in defined regions of the linkage groups. [The data were built into a regularly updated Genome Database for Rosaceae (GDR), available at (http://www.genome.clemson.edu/gdr/).].

[Genome-wide identification and expression analysis of the WRKY gene family in peach].

Science.gov (United States)

Gu, Yan-bing; Ji, Zhi-rui; Chi, Fu-mei; Qiao, Zhuang; Xu, Cheng-nan; Zhang, Jun-xiang; Zhou, Zong-shan; Dong, Qing-long

2016-03-01

The WRKY transcription factors are one of the largest families of transcriptional regulators and play diverse regulatory roles in biotic and abiotic stresses, plant growth and development processes. In this study, the WRKY DNA-binding domain (Pfam Database number: PF03106) downloaded from Pfam protein families database was exploited to identify WRKY genes from the peach (Prunus persica 'Lovell') genome using HMMER 3.0. The obtained amino acid sequences were analyzed with DNAMAN 5.0, WebLogo 3, MEGA 5.1, MapInspect and MEME bioinformatics softwares. Totally 61 peach WRKY genes were found in the peach genome. Our phylogenetic analysis revealed that peach WRKY genes were classified into three Groups: Ⅰ, Ⅱ and Ⅲ. The WRKY N-terminal and C-terminal domains of Group Ⅰ (group I-N and group I-C) were monophyletic. The Group Ⅱ was sub-divided into five distinct clades (groupⅡ-a, Ⅱ-b, Ⅱ-c, Ⅱ-d and Ⅱ-e). Our domain analysis indicated that the WRKY regions contained a highly conserved heptapeptide stretch WRKYGQK at its N-terminus followed by a zinc-finger motif. The chromosome mapping analysis showed that peach WRKY genes were distributed with different densities over 8 chromosomes. The intron-exon structure analysis revealed that structures of the WRKY gene were highly conserved in the peach. The conserved motif analysis showed that the conserved motifs 1, 2 and 3, which specify the WRKY domain, were observed in all peach WRKY proteins, motif 5 as the unknown domain was observed in group Ⅱ-d, two WRKY domains were assigned to GroupⅠ. SqRT-PCR and qRT-PCR results indicated that 16 PpWRKY genes were expressed in roots, stems, leaves, flowers and fruits at various expression levels. Our analysis thus identified the PpWRKY gene families, and future functional studies are needed to reveal its specific roles.

Design of a tool for extracting a plexiglass falls to the bottom of the reactor pool TRIGA MKI

International Nuclear Information System (INIS)

Kankunku, P.K.; Lukanda, M.V.

2011-01-01

This paper presents a particular problem, of extracting a plexiglas from the bottom of thr reactor swimming pool. With rudimentary techniques of extraction (two attempts), we noticed that these techniques were unsuccessful, by the way we proceeded in designing a tool made of steel which solved the problem of plexiglas extraction

CONTRIBUTIONS TO IMPROVING CULTURE TEHNOLOGIES OF PEACHES GROWN ON SANDY SOILS THE SOUTH OF OLTENIA

Directory of Open Access Journals (Sweden)

Anica Durau

2013-12-01

Full Text Available Technological factors with major implications in obtaining high yields and quality in peaches grown on sandy soils are planting row distance and shape of the crown, soil maintenance system, chemical, organic and foliar fertilzation. A smal size combined with the flatening of the crowns of the tres alows a dense planting, also ensure proper mechanization of work and easy penetration of light to the leaves and fruits. Crown form vertical belt proved to be suitable for al planting distances studied, easily made and maintained, having fruit production ranged betwen 15.9 t / ha at a distance of 2 m, 10.3 t / ha at a distance of 2.5 m and 7.9 t / ha at a distance of 3 m. The state of soil nutrient supply influence sucesful peach crop on sandy soils. The fertilzer dose of technology to N10 P80 K10 kg s.a / ha production was 34.9 t / ha. Organic fertilzation also contributes to obtaining high yields of peach. In sandy soil conditions most fruit production of 9.6 t / ha was obtained by fertilzation with organic manure 60t/ha. Besides fertilzation, soil maintenance system is one important link in the technology peach crop on sandy soils. The results found that the biggest peach fruit production was obtained from field maintenance system black-8,2t/ha. Using technology in foliar peaches culture on sandy soils, is an important means of providing nutrients that lead to improved proceses of growth and fructification. The best way is with foliar fertilzation Folibor in dose 5l/ha, the production obtained was 12.4 t /ha.

Individual sugar and acid composition within southeastern peach germplasm

Science.gov (United States)

eaches grown in the southeast are valued for their acidic, sweet flavor. A complex mixture of various sugars and acids at different ratios play a key role in determining these unique peach flavor attributes. To understand the flavor profile of fresh market peaches, individual sugar and acid compone...

A Novel Thermal-Mechanical Detection System for Reactor Pressure Vessel Bottom Failure Monitoring in Severe Accidents

International Nuclear Information System (INIS)

Bi, Daowei; Bu, Jiangtao; Xu, Dongling

2013-06-01

Following the Fukushima Daiichi nuclear accident in Japan, there is an increased need of enhanced capabilities for severe accident management (SAM) program. Among others, a reliable method for detecting reactor pressure vessel (RPV) bottom failure has been evaluated as imperative by many utility owners. Though radiation and/or temperature measurement are potential solutions by tradition, there are some limitations for them to function desirably in such severe accident as that in Japan. To provide reliable information for assessment of accident progress in SAM program, in this paper we propose a novel thermal-mechanical detection system (TMDS) for RPV bottom failure monitoring in severe accidents. The main components of TMDS include thermally sensitive element, metallic cables, tension controlled switch and main control room annunciation device. With TMDS installed, there shall be a reliable means of keeping SAM decision-makers informed whether the RPV bottom has indeed failed. Such assurance definitely guarantees enhancement of severe accident management performance and significantly improve nuclear safety and thus protect the society and people. (authors)

Fungicide Efficacy in Peach Rusty Spot Control in Serbia

Directory of Open Access Journals (Sweden)

Nenad Dolovac

2010-01-01

Full Text Available Rusty Spot has long been known as a harmful peach disease in many parts of the world. During the past several years, rusty spot infection of the late-maturing peach cultivars (Summerset, Suncrest, Fayette and O’Henry caused significant yield losses in Serbia.Although the etiology of the disease is still unknown, there are numerous studies attempting to set a strategy for its control and recommend appropriate chemical and other peach protection methods. However, because of specific environmental conditions in Serbia, recommended protection method using repeated fungicide treatments, starting from petal fall, did not prove to be efficient and the rate of infection in some susceptible peach cultivars reached 100%. In 2003 and 2004 a field trial was conducted in order to test the efficacy of fungicides (a.i. kresoxim-methyl, flusilazole and sulfur for the efficient control of Rusty Spot epidemics. The trial was carried out under conditions of natural infection on the peach cv. Summerset at the locality of Bela Crkva, Serbia. In the ntreated control plots,high disease incidence was recorded with the percentage of affected fruit surface ranging from 33.5% in the first, up to the 35.4% in the second year of the trail. Among fungicides included in the trial, kresoxim-methyl proved to be the most efficient (90.25% in the first and 91.12% in the second year of the trial, flusilazole exhibited lower efficacy (87.28% and 80.61%, respectively while sulfur was the least efficient 82.33% and 80.30%, respectively. Determination of the most efficient fungicide for the peach rusty spot control in Serbia provides basic nformation for further investigations which will include optimization of treatment terms, as well as additional agro-technical control measures.

Production and evaluation of mineral and nutrient contents, chemical composition, and sensory properties of ice creams fortified with laboratory-prepared peach fibre

Science.gov (United States)

Yangılar, Filiz

2016-01-01

Background In the coming years, a nutraceutical food may provide both physical and mental benefits that are commonly attributed to the active components of the food. Objective In this study, we determined the nutrient and mineral contents, sensory properties, and physical and chemical characteristics of ice creams manufactured using peach fibre at different concentrations (1 and 2%). Method A total of five experimental groups were formed: two types (from peach peel and pulp) of flour, two fibre concentrations (1 and 2%), and a control group without fibres. Results Flour obtained from peach pulp and peel was found to have a significant (pice cream samples, especially the rates of Ca, K, Mg, and P, which increased in the samples depending on the content of peach fibre. Sensory ratings and acceptability of ice creams decreased significantly with increasing peach peel fibre, whereas ice creams made with C (control) and B1 (ice creams made from 1% peach pulp fibre) was the highest scored by the panellists. Conclusions Peach fibre concentrates might be used as a good source of nutraceutical ingredients. PMID:27814781

Physics design of advanced steady-state tokamak reactor A-SSTR2

International Nuclear Information System (INIS)

Nishio, Satoshi; Ushigusa, Kenkichi

2000-10-01

Based on design studies on the fusion power reactor such as the DEMO reactor SSTR, the compact power reactor A-SSTR and the DREAM reactor with a high environmental safety and high availability, a new concept of compact and economic fusion power reactor (A-SSTR2) with high safety and high availability is proposed. Employing high temperature superconductor, the toroidal filed coils supplies the maximum field of 23T on conductor which corresponds to 11T at the magnetic axis. A-SSTR2 (R p =6.2m, a p =1.5m, I p =12MA) has a fusion power of 4GW with β N =4. For an easy maintenance and for an enough support against a strong electromagnetic force on coils, a poloidal coils system has no center solenoid coils and consists of 6 coils located on top and bottom of the machine. Physics studies on the plasma equilibrium, controllability of the configuration, the plasma initiation and non-inductive current ramp-up, fusion power controllability and the diverter have shown the validity of the A-SSTR2 concept. (author)

Ultrasonic test results for the reactor pressure vessel of the HTTR. Longitudinal welding line of bottom dome

International Nuclear Information System (INIS)

Nojiri, Naoki; Ohwada, Hiroyuki; Kato, Yasushi

2008-06-01

This paper describes the inspection method, the measured area, etc. of the ultrasonic test of the in-service inspection (ISI) for welding lines of the reactor pressure vessel of the HTTR and the inspection results of the longitudinal welding line of the bottom dome. The pre-service inspection (PSI) results for estimation of occurrence and progression of defects to compare the ISI results is described also. (author)

Gas exchanges in peach palms as a function of the spad chlorophyll meter readings

Directory of Open Access Journals (Sweden)

Maria Luiza Sant'anna Tucci

2011-10-01

Full Text Available The close relationship between the chlorophyll-meters readings and the total chlorophyll and nitrogen contents in leaves, has allowed their evaluation both in annual and perennial species. Besides, some physiological events such as the CO2 assimilation have also been estimated by chlorophyll meters. This work was carried out aiming to evaluate the gas exchanges of peach palms as a function of the chlorophyll SPAD-Meter readings. Three year-old peach palms from Yurimaguas, Peru were studied in Ubatuba, SP, Brazil, spaced 2 x 1 m in area under a natural gradient of organic matter which allowed four plots to be considered, according to the peach palms leaves colors, from light yellow to dark green. The SPAD readings and the stomatal frequency of leaflets were evaluated. The photosynthetic photon flux density (PPFD, μmol m-2 s-1, the leaf temperature (Tleaf, ºC, the CO2 assimilation (A, μmol m-2 s-1, the stomatal conductance (g s, mol m-2 s-1, the transpiration (E, mmol m-2 s-1 and the intercellular CO2 concentration (Ci, μmol mol-1 were evaluated with a portable infrared gas analyzer (LCA-4, ADC BioScientific Ltd., Great Amwell, U.K.. A linear increase in the CO2 assimilation as a function of the SPAD readings (y = -0.34 + 0.19x, R² = 0.99, indicates that they can be a rapid and cheap complementary method to evaluate in peach palms some important physiological events, such as CO2 assimilation.

Development of Reactor Vessel Bottom Mount Instrumentation Nozzle Routine Inspection Device

Energy Technology Data Exchange (ETDEWEB)

Khaled, Atya Ahmed Abdallah; Ihn, Namgung [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of)

2015-10-15

The primary coolant water of pressurized water reactors has created cracks in j-weld of penetrations with Alloy 600 through a process called primary water stress corrosion cracking. On October 6, 2013, BMI nozzle number 3 at Palo Verde Unit 3 (PVNGS-3) exhibited small white de-posits around the annulus. Nozzle attachment to the RV lower head is by J-groove weld to the inside penetration of the nozzle and the weld material is of Alloy 600 material. Above two cases clearly show the necessity of routine inspection of RV lower head penetration during refueling outage. Nondestructive inspection is generally performed to detect fine cracks or defects that may develop during operation. Defects usually occur at weld regions, hence most non-destructive inspection is to scan and check any defects or crack in the weld region. BMI nozzles at the bottom head of a nuclear reactor vessel (RV) are one of such area for inspection. But BMI nozzles have not been inspected during regular refuel outage due to the relative small size of BMI nozzle and limited impact of the consequences of BMI leak. However, there is growing concern since there have been leaks at nuclear power plants (NPPs) as well as recent operating experience. In this study, we propose a system that is conveniently used for nondestructive inspection of BMI nozzles during regular refueling outage without removing all the reactor internals. A 3D model of the inspection system was also developed along with the RV and internals which permits a virtual 3D simulation to check the design concept and usability of the system.

Experiments on graphite block gaps connected with leak flow in bottom-core structure of experimental very high-temperature gas-cooled reactor

International Nuclear Information System (INIS)

Kikuchi, Kenji; Futakawa, Masatoshi; Takizuka, Takakazu; Kaburaki, Hideo; Sanokawa, Konomo

1984-01-01

In order to minimize the leak flow rate of an experimental VHTR (a multi-purpose very high-temperature gas-cooled reactor), the graphite blocks are tightened to reduce the gap distance between blocks by core restrainers surrounded outside of the fixed reflectors of the bottom-core structure and seal elements are placed in the gaps. By using a 1/2.75-scale model of the bottom-core structure, the experiments on the following items have been carried out: a relationship between core restraint force and block gap, a relationship between core restraint force and inclined angle of the model, leak flow characteristics of seal elements etc. The conclusions derived from the experiments are as follows: (1) Core restraint force is significantly effective for decreasing the gap distance between hot plenum blocks, but ineffective for the gap between hot plenum block and fixed reflector. (2) Graphite seal element reduces the leak flow rate from the top surface of hot plenum block into plenum region to one-third. (author)

Effect of water flow rate and water chemistry on corrosion environment in reactor pressure vessel bottom of BWRs

Energy Technology Data Exchange (ETDEWEB)

Ichikawa, Nagayoshi; Hemmi, Yukio; Takagi, Junichi; Urata, Hidehiro [Toshiba Corp., Kawasaki, Kanagawa (Japan)

1999-07-01

To evaluate the corrosion environment at the bottom of the reactor pressure vessel in a BWR and the effect of hydrogen water chemistry on the corrosion of materials in the region, measurements of the corrosion potential of Type-304 stainless steel and nickel base alloy were made in a laboratory test loop. The effect of water chemistry on the corrosion potential of nickel base alloy is found to be similar to the effect on Type-304 stainless steel. Flow analysis and precise evaluations of the corrosion potential of materials in the bottom region were implemented. Corrosion potentials throughout the region were evaluated from the flow analysis results. At the jet pump outlet and shroud support leg, a rather large amount of hydrogen had to be added to reduce the potential. Conversely, a small amount of hydrogen was enough in the case of the stub tube of the control rod drive guide tubing and the ICM housings located in the center of the bottom region. (author)

Effect of water flow rate and water chemistry on corrosion environment in reactor pressure vessel bottom of BWRs

International Nuclear Information System (INIS)

Ichikawa, Nagayoshi; Hemmi, Yukio; Takagi, Junichi; Urata, Hidehiro

1999-01-01

To evaluate the corrosion environment at the bottom of the reactor pressure vessel in a BWR and the effect of hydrogen water chemistry on the corrosion of materials in the region, measurements of the corrosion potential of Type-304 stainless steel and nickel base alloy were made in a laboratory test loop. The effect of water chemistry on the corrosion potential of nickel base alloy is found to be similar to the effect on Type-304 stainless steel. Flow analysis and precise evaluations of the corrosion potential of materials in the bottom region were implemented. Corrosion potentials throughout the region were evaluated from the flow analysis results. At the jet pump outlet and shroud support leg, a rather large amount of hydrogen had to be added to reduce the potential. Conversely, a small amount of hydrogen was enough in the case of the stub tube of the control rod drive guide tubing and the ICM housings located in the center of the bottom region. (author)

Top-down and bottom-up approaches for cost estimating new reactor designs

International Nuclear Information System (INIS)

Berbey, P.; Gautier, G.M.; Duflo, D.; Rouyer, J.L.

2007-01-01

For several years, Generation-4 designs will be 'pre-conceptual' for the less mature concepts and 'preliminary' for the more mature concepts. In this situation, appropriate data for some of the plant systems may be lacking to develop a bottom-up cost estimate. Therefore, a more global approach, the Top-Down Approach (TDA), is needed to help the designers and decision makers in comparing design options. It utilizes more or less simple models for cost estimating the different parts of a design. TDA cost estimating effort applies to a whole functional element whose cost is approached by similar estimations coming from existing data, ratios and models, for a given range of variation of parameters. Modeling is used when direct analogy is not possible. There are two types of models, global and specific ones. Global models are applied to cost modules related to Code Of Account. Exponential formulae such as Ci = Ai + (Bi x Pi n ) are used when there are cost data for comparable modules in nuclear or other industries. Specific cost models are developed for major specific components of the plant: - process equipment such as reactor vessel, steam generators or large heat exchangers. - buildings, with formulae estimating the construction cost from base cost of m3 of building volume. - systems, when unit costs, cost ratios and models are used, depending on the level of detail of the design. Bottom Up Approach (BUA), which is based on unit prices coming from similar equipment or from manufacturer consulting, is very valuable and gives better cost estimations than TDA when it can be applied, that is at a rather late stage of the design. Both approaches are complementary when some parts of the design are detailed enough to be estimated by BUA, and when BUA results are used to check TDA results and to improve TDA models. This methodology is applied to the HTR (High Temperature Reactor) concept and to an advanced PWR design

The Synthesis and Characterization of Peach-Like ZnO

International Nuclear Information System (INIS)

Kamalianfar, A.; Halim, S. A.; Navasery, M.; Din Fasih, Ud; Lim, K. P.; Chen, S. K.; Jahromi, Siamak Pilban; Zahedi, J. A. M.

2012-01-01

Peach-like ZnO microstructures are synthesized using vapor phase transport on MgO (001) substrates with a copper oxide (60 nm) buffer layer. The structure and morphology of the product are investigated using an x-ray diffractometer (XRD) and a field-emission scanning electron microscope. The peaches have an average diameter of 3 μm and a wurtzite structure. To study the optical properties, photoluminescence (PL) and Raman spectroscopy are employed. A strong UV emission at 380 nm in the PL spectra is observed, and a sharp and dominant peak at 437 cm −1 in the Raman spectrum can be assigned to the good crystallization of obtained product. In addition, the growth mechanism of the peach-like ZnO structure is tentatively investigated based on the EDX analysis and growth time

CHAP-2 heat-transfer analysis of the Fort St. Vrain reactor core

International Nuclear Information System (INIS)

Kotas, J.F.; Stroh, K.R.

1983-01-01

The Los Alamos National Laboratory is developing the Composite High-Temperature Gas-Cooled Reactor Analysis Program (CHAP) to provide advanced best-estimate predictions of postulated accidents in gas-cooled reactor plants. The CHAP-2 reactor-core model uses the finite-element method to initialize a two-dimensional temperature map of the Fort St. Vrain (FSV) core and its top and bottom reflectors. The code generates a finite-element mesh, initializes noding and boundary conditions, and solves the nonlinear Laplace heat equation using temperature-dependent thermal conductivities, variable coolant-channel-convection heat-transfer coefficients, and specified internal fuel and moderator heat-generation rates. This paper discusses this method and analyzes an FSV reactor-core accident that simulates a control-rod withdrawal at full power

Burdock fructooligosaccharide enhances biocontrol of Rhodotorula mucilaginosa to postharvest decay of peaches.

Science.gov (United States)

Zhang, Hongyin; Liu, Zhouyang; Xu, Baitian; Chen, Keping; Yang, Qiya; Zhang, Qiuyun

2013-10-15

The influence of adding burdock fructooligosaccharide (BFO) in the culture media on the efficacy of Rhodotorula mucilaginosa in controlling postharvest decay of peaches and its possible mode of action were investigated. The antagonistic activity of R. mucilaginosa to Rhizopus decay and blue mold decay of peaches was greatly enhanced through cultivation in the nutrient yeast dextrose agar (NYDA) medium amended with BFO at the concentration of 0.32%, compared with that cultivated in NYDB without BFO. R. mucilaginosa at 1×10(8) cells/mL cultivation in the NYDB media did not reduce the natural decay incidence of peaches, compared with the control after 30 d at 4 °C followed by 7d at 20 °C. However, R. mucilaginosa cultivation in the NYDB media amended with BFO at the concentration of 0.32% reduced the natural decay incidence of peaches. The population of R. mucilaginosa harvested from NYDB amended with BFO at 0.32% increased rapidly in peach wounds compared to that harvested from NYDB without BFO no matter peaches were stored at 20 °C or 4 °C. The activities of chitinase and β-1,3-glucanase of cell-free culture filtrate of R. mucilaginosa harvested from NYDB amended with BFO at 0.32% were higher than that at other concentrations and the control. Copyright © 2013 Elsevier Ltd. All rights reserved.

Nuclear Safeguards Considerations For The Pebble Bed Modular Reactor (PBMR)

Energy Technology Data Exchange (ETDEWEB)

Phillip Casey Durst; David Beddingfield; Brian Boyer; Robert Bean; Michael Collins; Michael Ehinger; David Hanks; David L. Moses; Lee Refalo

2009-10-01

High temperature reactors (HTRs) have been considered since the 1940s, and have been constructed and demonstrated in the United Kingdom (Dragon), United States (Peach Bottom and Fort Saint Vrain), Japan (HTTR), Germany (AVR and THTR-300), and have been the subject of conceptual studies in Russia (VGM). The attraction to these reactors is that they can use a variety of reactor fuels, including abundant thorium, which upon reprocessing of the spent fuel can produce fissile U-233. Hence, they could extend the stocks of available uranium, provided the fuel is reprocessed. Another attractive attribute is that HTRs typically operate at a much higher temperature than conventional light water reactors (LWRs), because of the use of pyrolytic carbon and silicon carbide coated (TRISO) fuel particles embedded in ceramic graphite. Rather than simply discharge most of the unused heat from the working fluid in the power plant to the environment, engineers have been designing reactors for 40 years to recover this heat and make it available for district heating or chemical conversion plants. Demonstrating high-temperature nuclear energy conversion was the purpose behind Fort Saint Vrain in the United States, THTR-300 in Germany, HTTR in Japan, and HTR-10 and HTR-PM, being built in China. This resulted in nuclear reactors at least 30% or more thermodynamically efficient than conventional LWRs, especially if the waste heat can be effectively utilized in chemical processing plants. A modern variant of high temperature reactors is the Pebble Bed Modular Reactor (PBMR). Originally developed in the United States and Germany, it is now being redesigned and marketed by the Republic of South Africa and China. The team examined historical high temperature and high temperature gas reactors (HTR and HTGR) and reviewed safeguards considerations for this reactor. The following is a preliminary report on this topic prepared under the ASA-100 Advanced Safeguards Project in support of the NNSA Next

Evolutionary Genomics of Peach and Almond Domestication

Directory of Open Access Journals (Sweden)

Dianne Velasco

2016-12-01

Full Text Available The domesticated almond [Prunus dulcis (L. Batsch] and peach [P. persica (Mill. D. A. Webb] originated on opposite sides of Asia and were independently domesticated ∼5000 yr ago. While interfertile, they possess alternate mating systems and differ in a number of morphological and physiological traits. Here, we evaluated patterns of genome-wide diversity in both almond and peach to better understand the impacts of mating system, adaptation, and domestication on the evolution of these taxa. Almond has around seven times the genetic diversity of peach, and high genome-wide FST values support their status as separate species. We estimated a divergence time of ∼8 MYA (million years ago, coinciding with an active period of uplift in the northeast Tibetan Plateau and subsequent Asian climate change. We see no evidence of a bottleneck during domestication of either species, but identify a number of regions showing signatures of selection during domestication and a significant overlap in candidate regions between peach and almond. While we expected gene expression in fruit to overlap with candidate selected regions, instead we find enrichment for loci highly differentiated between the species, consistent with recent fossil evidence suggesting fruit divergence long preceded domestication. Taken together, this study tells us how closely related tree species evolve and are domesticated, the impact of these events on their genomes, and the utility of genomic information for long-lived species. Further exploration of this data will contribute to the genetic knowledge of these species and provide information regarding targets of selection for breeding application, and further the understanding of evolution in these species.

Evolutionary Genomics of Peach and Almond Domestication.

Science.gov (United States)

Velasco, Dianne; Hough, Josh; Aradhya, Mallikarjuna; Ross-Ibarra, Jeffrey

2016-12-07

The domesticated almond [Prunus dulcis (L.) Batsch] and peach [P. persica (Mill.) D. A. Webb] originated on opposite sides of Asia and were independently domesticated ∼5000 yr ago. While interfertile, they possess alternate mating systems and differ in a number of morphological and physiological traits. Here, we evaluated patterns of genome-wide diversity in both almond and peach to better understand the impacts of mating system, adaptation, and domestication on the evolution of these taxa. Almond has around seven times the genetic diversity of peach, and high genome-wide [Formula: see text] values support their status as separate species. We estimated a divergence time of ∼8 MYA (million years ago), coinciding with an active period of uplift in the northeast Tibetan Plateau and subsequent Asian climate change. We see no evidence of a bottleneck during domestication of either species, but identify a number of regions showing signatures of selection during domestication and a significant overlap in candidate regions between peach and almond. While we expected gene expression in fruit to overlap with candidate selected regions, instead we find enrichment for loci highly differentiated between the species, consistent with recent fossil evidence suggesting fruit divergence long preceded domestication. Taken together, this study tells us how closely related tree species evolve and are domesticated, the impact of these events on their genomes, and the utility of genomic information for long-lived species. Further exploration of this data will contribute to the genetic knowledge of these species and provide information regarding targets of selection for breeding application, and further the understanding of evolution in these species. Copyright © 2016 Velasco et al.

Evolutionary Genomics of Peach and Almond Domestication

Science.gov (United States)

Velasco, Dianne; Hough, Josh; Aradhya, Mallikarjuna; Ross-Ibarra, Jeffrey

2016-01-01

The domesticated almond [Prunus dulcis (L.) Batsch] and peach [P. persica (Mill.) D. A. Webb] originated on opposite sides of Asia and were independently domesticated ∼5000 yr ago. While interfertile, they possess alternate mating systems and differ in a number of morphological and physiological traits. Here, we evaluated patterns of genome-wide diversity in both almond and peach to better understand the impacts of mating system, adaptation, and domestication on the evolution of these taxa. Almond has around seven times the genetic diversity of peach, and high genome-wide FST values support their status as separate species. We estimated a divergence time of ∼8 MYA (million years ago), coinciding with an active period of uplift in the northeast Tibetan Plateau and subsequent Asian climate change. We see no evidence of a bottleneck during domestication of either species, but identify a number of regions showing signatures of selection during domestication and a significant overlap in candidate regions between peach and almond. While we expected gene expression in fruit to overlap with candidate selected regions, instead we find enrichment for loci highly differentiated between the species, consistent with recent fossil evidence suggesting fruit divergence long preceded domestication. Taken together, this study tells us how closely related tree species evolve and are domesticated, the impact of these events on their genomes, and the utility of genomic information for long-lived species. Further exploration of this data will contribute to the genetic knowledge of these species and provide information regarding targets of selection for breeding application, and further the understanding of evolution in these species. PMID:27707802

Bottom head failure program plan

International Nuclear Information System (INIS)

Meyer, R.O.

1989-01-01

Earlier this year the NRC staff presented a Revised Severe Accident Research Program Plan (SECY-89-123) to the Commission and initiated work on that plan. Two of the near-term issues in that plan involve failure of the bottom head of the reactor pressure vessel. These two issues are (1) depressurization and DCH and (2) BWR Mark I Containment Shell Meltthrough. ORNL has developed models for several competing failure mechanisms for BWRs. INEL has performed analytical and experimental work directly related to bottom head failure in connection with several programs. SNL has conducted a number of analyses and experimental activities to examine the failure of LWR vessels. In addition to the government-sponsored work mentioned above, EPRI and FAI performed studies on vessel failure for the Industry Degraded Core Rulemaking Program (IDCOR). EPRI examined the failure of a PWR vessel bottom head without penetrations, as found in some Combustion Engineering reactors. To give more attention to this subject as called for by the revised Severe Accident Research Plan, two things are being done. First, work previously done is being reviewed carefully to develop an overall picture and to determine the reliability of assumptions used in those studies. Second, new work is being planned for FY90 to try to complete a reasonable understanding of the failure process. The review and planning are being done in close cooperation with the ACRS. Results of this exercise will be presented in this paper

Development and engineering plan for graphite spent fuels conditioning program

International Nuclear Information System (INIS)

Bendixsen, C.L.; Fillmore, D.L.; Kirkham, R.J.; Lord, D.L.; Phillips, M.B.; Pinto, A.P.; Staiger, M.D.

1993-09-01

Irradiated (or spent) graphite fuel stored at the Idaho Chemical Processing Plant (ICPP) includes Fort St. Vrain (FSV) reactor and Peach Bottom reactor spent fuels. Conditioning and disposal of spent graphite fuels presently includes three broad alternatives: (1) direct disposal with minimum fuel packaging or conditioning, (2) mechanical disassembly of spent fuel into high-level waste and low-level waste portions to minimize geologic repository requirements, and (3) waste-volume reduction via burning of bulk graphite and other spent fuel chemical processing of the spent fuel. A multi-year program for the engineering development and demonstration of conditioning processes is described. Program costs, schedules, and facility requirements are estimated

Application of hydrogen water chemistry to moderate corrosive circumstances around the reactor pressure vessel bottom of boiling water reactors

International Nuclear Information System (INIS)

Uchida, Shunsuke; Ibe, Eishi; Nakata, Kiyatomo; Fuse, Motomasa; Ohsumi, Katsumi; Takashima, Yoshie

1995-01-01

Many efforts to preserve the structural integrity of major piping, components, and structures in a boiling water reactor (BWR) primary cooling system have been directed toward avoiding intergranular stress corrosion cracking (IGSCC). Application of hydrogen water chemistry (HWC) to moderate corrosive circumstances is a promising approach to preserve the structural integrity during extended lifetimes of BWRs. The benefits of HWC application are (a) avoiding the occurrence of IGSCC on structural materials around the bottom of the crack growth rate, even if microcracks are present on the structural materials. Several disadvantage caused by HWC are evaluated to develop suitable countermeasures prior to HWC application. The advantages and disadvantages of HWC are quantitatively evaluated base on both BWR plant data and laboratory data shown in unclassified publications. Their trade-offs are discussed, and suitable applications of HWC are described. It is concluded that an optimal amount of Hydrogen injected into the feedwater can moderate corrosive circumstances, in the region to be preserved, without serious disadvantages. The conclusions have been drawn by combining experimental and theoretical results. Experiments in BWR plants -- e.g., direct measurements of electrochemical corrosion potential and crack growth rate at the RPV bottom -- are planned that would collect data to support the theoretical considerations

Reactor risk reference document: Main report: Draft for comment

International Nuclear Information System (INIS)

1987-02-01

The Reactor Risk Reference Document, NUREG-1150, provides the results of major risk analyses for five different US light-water reactors (Surry, Zion, Sequoyah, Peach Bottom, and Grand Gulf) using state-of-the-art methods. The broad base of probabilistic risk information contained in this document is intended to provide a data base and insights to be used in a number of regulatory applications. It is anticipated that these regulatory actions will include implementation of the NRC Severe Accident Policy Statement, implementation of NRC safety goal policy, consideration of the NRC Backfit Rule, evaluation and possible revision of regulations or regulatory requirements for emergency preparedness, plant siting, and equipment qualification, and establishment of risks-oriented priorities for allocating agency resources. This report has been published in draft form. For the plants analyzed, this document describes the major factors related to internally initiated events that contribute to severe core damage, frequencies and related uncertainty ranges of severe core damage events, the major factors and severe accident phenomena that could lead to containment failure, the conditional probabilities and uncertainty ranges of early containment failure, the consequences and risks of severe accidents, including the sensitivity of these risks to factors such as evacuation or sheltering measures, comparisons of the risks with NRC safety goals, and cost and risk-reduction analyses of plant-specific measures that could reduce risk from severe accidents

Characterization of fuel distribution in the Three Mile Island Unit 2 (TMI-2) reactor system by neutron and gamma-ray dosimetry

International Nuclear Information System (INIS)

Gold, R.; Roberts, J.H.; Ruddy, F.H.; Preston, C.C.; McNeece, J.P.; Kaiser, B.J.; McElroy, W.N.

1984-01-01

Neutron and gamma-ray dosimetry are being used for nondestructive assessment of the fuel distribution throughout the Three Mile Island Unit 2 (TMI-2) reactor core region and primary cooling system. The fuel content of TMI-2 makeup and purification Demineralizer A has been quantified with Si(Li) continuous gamma-ray spectrometry and solid-state track recorder (SSTR) neutron dosimetry. For fuel distribution characterization in the core region, results from SSTR neutron dosimetry exposures in the TMI-2 reactor cavity are presented. These SSTR results are consistent with the presence of a significant amount of fuel debris, equivalent to several fuel assemblies or more, lying at the bottom of the reactor vessel. (Auth.)

Transcriptomic and Functional Analyses Reveal That PpGLK1 Regulates Chloroplast Development in Peach (Prunus persica

Directory of Open Access Journals (Sweden)

Min Chen

2018-01-01

Full Text Available Peach is an ideal species for fruit tree research because of its small, fully sequenced genome. Chloroplast development is dependent on the tight cooperation between the nuclear and plastid genomes, and is regulated by GLK transcription factors. In this work, the pigment content was monitored and the chloroplast-to-chromoplast conversion during the fruit ripening was visualized by transmission electron microscopy. Localization and expression analyses showed that PpGLK1 was located in the nucleus and expressed mainly in the leaves and fruit skin. A transcriptome analysis showed that PpGLK1 and its target genes were significantly differentially expressed in ripening peach fruit skin. PpGLK1 silencing affected chlorophyll accumulation in peach leaves and fruits. Overexpression of PpGLK1 rescued the phenotypes of the Arabidopsis Atglk1Atglk2 double mutant and the tomato uniform ripening mutant. The results of a yeast two-hybrid analysis showed that PpGLK1 is autoactivated and that PpGLK1 (301-542 a.a. interacted with PpARF5. Together, our results indicate that PpGLK1 regulates chloroplast development in green tissues in peach. Therefore, it may be a promising target gene for improving the production and quality of peach by genetic engineering and breeding approaches.

Agronomical Parameters, Sugar Profile and Antioxidant Compounds of “Catherine” Peach Cultivar Influenced by Different Plum Rootstocks

Directory of Open Access Journals (Sweden)

Carolina Font i Forcada

2014-02-01

Full Text Available The influence of seven plum rootstocks (Adesoto, Monpol, Montizo, Puebla de Soto 67 AD, PM 105 AD, St. Julien GF 655/2 and Constantí 1 on individual and total sugars, as well as on antioxidant content in fruit flesh of “Catherine” peaches, was evaluated for three years. Agronomical and basic fruit quality parameters were also determined. At twelve years after budding, significant differences were found between rootstocks for the different agronomic and fruit quality traits evaluated. The Pollizo plum rootstocks Adesoto and PM 105 AD seem to induce higher sweetness to peach fruits, based on soluble solids content, individual (sucrose, fructose and sorbitol and total sugars. A clear tendency was also observed with the rootstock Adesoto, inducing the highest content of phenolics, flavonoids, vitamin C and relative antioxidant capacity (RAC. Thus, the results of this study demonstrate the significant effect of rootstock on the sugar profile and phytochemical characteristics of peach fruits. In addition, this work shows the importance of the sugar profile, because specific sugars play an important role in peach flavour quality, as well as the studied phytochemical compounds when looking for high quality peaches with enhanced health properties.

Effect of controlled atmosphere on postharvest quality of 'Douradão' peaches

Directory of Open Access Journals (Sweden)

Ligia Regina Radomille de Santana

2011-03-01

Full Text Available This study was carried out with one of the most important cultivar grown in the State of Sao Paulo, Brazil, which has gained the preference of consumers, due to its sweet taste, intense skin color and large size; however, these fruits are susceptible to chilling injury when cold stored for long periods. The use of controlled atmosphere (CA with elevated CO2 and reduced O2 concentrations prevent the onset of the chilling symptom. Thus, the effect of three different conditions of controlled atmosphere (CA1, CA2, CA3 and Control was evaluated in order to extend the storage life of 'Douradão' peaches. After 14, 21 and 28 days, samples were withdrawn from CA and kept in fresh air at 25 ± 1 °C and 90 ± 5% RH to complete ripening. On the day of removal and after 4 days, were the peaches quality characteristics were evaluated. The results showed that the use of CA during cold storage reduced weight loss and prevented postharvest decay. CA2 and CA3 treatments were effective in keeping good quality of 'Douradão' peaches during 28 days of cold storage, the ripe fruits showed reduced incidence of woolliness, adequate juiciness and flesh firmness. CA1 and Control treatments did not present marketable conditions after 14 days of cold storage.

Consumption, preferences and habits of purchasing consumers of peaches and nectarines

Directory of Open Access Journals (Sweden)

Gener Augusto Penso

2018-06-01

Full Text Available Abstract In Brazil, there are few studies and information available on consumer preferences for peaches and nectarines. This lack of information, has hindered some aspects of the production chain, as the choice and exploitation of more appropriate cultivars, offer periods, adoption of marketing and marketing strategies, consequently affecting the availability and commercialization of fruits. This study aimed to analyze the consumer preference of peaches and nectarines, evaluate the traits observed for their acquisition, and the marketplace where they are preferably purchased. The research was carried out from November 2016 to February 2017, using the descriptive research methodology, by Survey method and Web 2.0. A structured questionnaire was applied with closed questions. An online form questionnaire was prepared using the Google docs application and also distributed online, through the internet social Medias. 610 people participated in the survey, with predominance of consumers living in the South and Southeast regions of the country, in the age groups of 21 to 30 years old, with a predominance of female participants. Consumption is mainly in the in natura form, and often predominates certain times a year. Consumers buy these fruits mainly in the supermarkets/hypermarkets. The consumers of peaches and nectarines in Brazil have a higher preference for fruits with yellow flesh and red epidermis, followed by fruits with white flesh and intense red epidermis, both preferably with free stone. The main criteria for the acquisition of peaches and nectarines in Brazil are fruit appearance (presence and/or absence of defects, bruises, etc.; followed by price, color of epidermis and fruit size.

Genomic characterization of putative allergen genes in peach/almond and their synteny with apple

Science.gov (United States)

Chen, Lin; Zhang, Shuiming; Illa, Eudald; Song, Lijuan; Wu, Shandong; Howad, Werner; Arús, Pere; Weg, Eric van de; Chen, Kunsong; Gao, Zhongshan

2008-01-01

Background Fruits from several species of the Rosaceae family are reported to cause allergic reactions in certain populations. The allergens identified belong to mainly four protein families: pathogenesis related 10 proteins, thaumatin-like proteins, lipid transfer proteins and profilins. These families of putative allergen genes in apple (Mal d 1 to 4) have been mapped on linkage maps and subsequent genetic study on allelic diversity and hypoallergenic traits has been carried out recently. In peach (Prunus persica), these allergen gene families are denoted as Pru p 1 to 4 and for almond (Prunus dulcis)Pru du 1 to 4. Genetic analysis using current molecular tools may be helpful to establish the cause of allergenicity differences observed among different peach cultivars. This study was to characterize putative peach allergen genes for their genomic sequences and linkage map positions, and to compare them with previously characterized homologous genes in apple (Malus domestica). Results Eight Pru p/du 1 genes were identified, four of which were new. All the Pru p/du 1 genes were mapped in a single bin on the top of linkage group 1 (G1). Five Pru p/du 2 genes were mapped on four different linkage groups, two very similar Pru p/du 2.01 genes (A and B) were on G3, Pru p/du 2.02 on G7,Pru p/du 2.03 on G8 and Pru p/du 2.04 on G1. There were differences in the intron and exon structure in these Pru p/du 2 genes and in their amino acid composition. Three Pru p/du 3 genes (3.01–3.03) containing an intron and a mini exon of 10 nt were mapped in a cluster on G6. Two Pru p/du 4 genes (Pru p/du 4.01 and 4.02) were located on G1 and G7, respectively. The Pru p/du 1 cluster on G1 aligned to the Mal d 1 clusters on LG16; Pru p/du 2.01A and B on G3 to Mal d 2.01A and B on LG9; the Pru p/du 3 cluster on G6 to Mal d 3.01 on LG12; Pru p/du 4.01 on G1 to Mal d 4.03 on LG2; and Pru p/du 4.02 on G7 to Mal d 4.02 on LG2. Conclusion A total of 18 putative peach/almond allergen genes have

Genomic characterization of putative allergen genes in peach/almond and their synteny with apple

Directory of Open Access Journals (Sweden)

Weg Eric

2008-11-01

Full Text Available Abstract Background Fruits from several species of the Rosaceae family are reported to cause allergic reactions in certain populations. The allergens identified belong to mainly four protein families: pathogenesis related 10 proteins, thaumatin-like proteins, lipid transfer proteins and profilins. These families of putative allergen genes in apple (Mal d 1 to 4 have been mapped on linkage maps and subsequent genetic study on allelic diversity and hypoallergenic traits has been carried out recently. In peach (Prunus persica, these allergen gene families are denoted as Pru p 1 to 4 and for almond (Prunus dulcisPru du 1 to 4. Genetic analysis using current molecular tools may be helpful to establish the cause of allergenicity differences observed among different peach cultivars. This study was to characterize putative peach allergen genes for their genomic sequences and linkage map positions, and to compare them with previously characterized homologous genes in apple (Malus domestica. Results Eight Pru p/du 1 genes were identified, four of which were new. All the Pru p/du 1 genes were mapped in a single bin on the top of linkage group 1 (G1. Five Pru p/du 2 genes were mapped on four different linkage groups, two very similar Pru p/du 2.01 genes (A and B were on G3, Pru p/du 2.02 on G7,Pru p/du 2.03 on G8 and Pru p/du 2.04 on G1. There were differences in the intron and exon structure in these Pru p/du 2 genes and in their amino acid composition. Three Pru p/du 3 genes (3.01–3.03 containing an intron and a mini exon of 10 nt were mapped in a cluster on G6. Two Pru p/du 4 genes (Pru p/du 4.01 and 4.02 were located on G1 and G7, respectively. The Pru p/du 1 cluster on G1 aligned to the Mal d 1 clusters on LG16; Pru p/du 2.01A and B on G3 to Mal d 2.01A and B on LG9; the Pru p/du 3 cluster on G6 to Mal d 3.01 on LG12; Pru p/du 4.01 on G1 to Mal d 4.03 on LG2; and Pru p/du 4.02 on G7 to Mal d 4.02 on LG2. Conclusion A total of 18 putative peach

21 CFR 145.170 - Canned peaches.

Science.gov (United States)

2010-04-01

... CONSUMPTION CANNED FRUITS Requirements for Specific Standardized Canned Fruits § 145.170 Canned peaches. (a... by a support through which it can freely move upward or downward. The lower end of the rod is a plane...

A remarkable synergistic effect at the transcriptomic level in peach fruits doubly infected by prunus necrotic ringspot virus and peach latent mosaic viroid.

Science.gov (United States)

Herranz, Mari Carmen; Niehl, Annette; Rosales, Marlene; Fiore, Nicola; Zamorano, Alan; Granell, Antonio; Pallas, Vicente

2013-05-28

Microarray profiling is a powerful technique to investigate expression changes of large amounts of genes in response to specific environmental conditions. The majority of the studies investigating gene expression changes in virus-infected plants are limited to interactions between a virus and a model host plant, which usually is Arabidopsis thaliana or Nicotiana benthamiana. In the present work, we performed microarray profiling to explore changes in the expression profile of field-grown Prunus persica (peach) originating from Chile upon single and double infection with Prunus necrotic ringspot virus (PNRSV) and Peach latent mosaic viroid (PLMVd), worldwide natural pathogens of peach trees. Upon single PLMVd or PNRSV infection, the number of statistically significant gene expression changes was relatively low. By contrast, doubly-infected fruits presented a high number of differentially regulated genes. Among these, down-regulated genes were prevalent. Functional categorization of the gene expression changes upon double PLMVd and PNRSV infection revealed protein modification and degradation as the functional category with the highest percentage of repressed genes whereas induced genes encoded mainly proteins related to phosphate, C-compound and carbohydrate metabolism and also protein modification. Overrepresentation analysis upon double infection with PLMVd and PNRSV revealed specific functional categories over- and underrepresented among the repressed genes indicating active counter-defense mechanisms of the pathogens during infection. Our results identify a novel synergistic effect of PLMVd and PNRSV on the transcriptome of peach fruits. We demonstrate that mixed infections, which occur frequently in field conditions, result in a more complex transcriptional response than that observed in single infections. Thus, our data demonstrate for the first time that the simultaneous infection of a viroid and a plant virus synergistically affect the host transcriptome in

Genetic analysis identifies the region of origin of smuggled peach palm seeds.

Science.gov (United States)

Cristo-Araújo, Michelly; Molles, David Bronze; Rodrigues, Doriane Picanço; Clement, Charles R

2017-04-01

Seeds of a plant, supposedly a palm tree known popularly as peach palm (Bactris gasipaes), were seized by the Federal Police in the state of Pará, Brazil, without documentation of legal origin to authorize transportation and marketing in Brazil. They were alleged to be from the western part of Amazonas, Brazil, near the frontier with Peru and Colombia, justifying the lack of documentation. The species was confirmed to be peach palm. To determine the likely place of origin, a genetic analysis was performed to determine the relationship between the seized seeds and representative populations of peach palm from all of Amazonia, maintained in the Peach palm Core Collection, at the National Research Institute for Amazonia, using nine microsatellite loci. Reynolds' coancestry analysis showed a strong relationship between the seeds and the Pampa Hermosa landrace, around Yurimaguas, Peru. The Structure program, used to infer the probability of an individual belonging to a given population, showed that most seeds grouped with populations close to Yurimaguas, Peru, corroborating the coancestry analysis. The Pampa Hermosa landrace is the main source of spineless peach palm seeds used in the Brazilian heart-of-palm agribusiness, which motivated the smugglers to attempt this biopiracy. Copyright © 2017 Elsevier B.V. All rights reserved.

The effect of ultraviolet irradiation on shelf-life and ripening of peaches and apples

International Nuclear Information System (INIS)

Lu, J.Y.; Stevens, C.; Khan, V.A.; Kabwe, M.; Wilson, C.L.

1991-01-01

''Loring'' and ''Elberta'' peaches and ''Golden Delicious'' apples were irradiated with UV (254nm) to doses of 0.84 X 10(4) to 40 X 10(4) erg/mm2 then stored. ''Loring'' were stored 10 days and ''Elberta'' 20 days at 12 degrees C. ''Golden Delicious'' were stored 30 days at 20-25 degrees C in a dark room. Fruit were examined and differences in percentage rot and in physical-chemical properties determined. Percentage rot decreased with increasing UV dose. Fruit were firmer, pH and soluble solids lower and acidity higher for UV-treated than for nontreated peaches; pH was lower and acidity and ascorbic acid higher in UV treated than in nontreated apples. Percentage weight loss was less for UV-treated apples. The results indicated that UV treatment not only reduced storage rots but also delayed ripening of peaches and apples

Differential metabolic rearrangements after cold storage are correlated with chilling injury resistance of peach fruits

Directory of Open Access Journals (Sweden)

Claudia A Bustamante

2016-09-01

Full Text Available Reconfiguration of the metabolome is a key component involved in the acclimation to cold in plants; however, few studies have been devoted to the analysis of the overall metabolite changes after cold storage of fruits prior to consumption. Here, metabolite profiling of six peach varieties with differential susceptibility to develop mealiness, a chilling-injury (CI symptom, was performed. According to metabolic content at harvest; after cold treatment; and after ripening, either following cold treatment or not; peach fruits clustered in distinct groups, depending on harvest-time, cold treatment, and ripening state. Both common and distinct metabolic responses among the six varieties were found; common changes including dramatic galactinol and raffinose rise; GABA, Asp and Phe increase; and 2-oxo-glutarate and succinate decrease. Raffinose content after long cold treatment quantitatively correlated to the degree of mealiness resistance of the different peach varieties; and thus, raffinose emerges as a candidate biomarker of this CI disorder. Xylose increase after cold treatment was found only in the susceptible genotypes, indicating a particular cell wall reconfiguration of these varieties while being cold-stored. Overall, results indicate that peach fruit differential metabolic rearrangements due to cold treatment, rather than differential metabolic priming before cold, are better related with CI resistance. The plasticity of peach fruit metabolism renders it possible to induce a diverse metabolite array after cold, which is successful, in some genotypes, to avoid CI

Hyperspectral imaging detection of decayed honey peaches based on their chlorophyll content.

Science.gov (United States)

Sun, Ye; Wang, Yihang; Xiao, Hui; Gu, Xinzhe; Pan, Leiqing; Tu, Kang

2017-11-15

Honey peach is a very common but highly perishable market fruit. When pathogens infect fruit, chlorophyll as one of the important components related to fruit quality, decreased significantly. Here, the feasibility of hyperspectral imaging to determine the chlorophyll content thus distinguishing diseased peaches was investigated. Three optimal wavelengths (617nm, 675nm, and 818nm) were selected according to chlorophyll content via successive projections algorithm. Partial least square regression models were established to determine chlorophyll content. Three band ratios were obtained using these optimal wavelengths, which improved spatial details, but also integrates the information of chemical composition from spectral characteristics. The band ratio values were suitable to classify the diseased peaches with 98.75% accuracy and clearly show the spatial distribution of diseased parts. This study provides a new perspective for the selection of optimal wavelengths of hyperspectral imaging via chlorophyll content, thus enabling the detection of fungal diseases in peaches. Copyright © 2017 Elsevier Ltd. All rights reserved.

Impact of glutathione on the allergenicity of the peach lipid transfer protein Pru p 3.

Science.gov (United States)

Gómez-Casado, C; Tordesillas, L; Kinkel, J; Starkl, P; Cuesta-Herranz, J; Roth-Walter F; Díaz-Perales, A; Jensen-Jarolim, E

2015-01-01

The allergenic potential of proteins can be altered under various physicochemical conditions. Glutathione (GSH) is a reducing agent that is used as an antioxidant in food products. We aimed to characterize the natural folding of peach proteins and test the allergenicity of reduced and natural Pru p 3, the major peach allergen. Pru p 3 was purified from peach, and its conformation was analyzed by means of circular dichroism. Using a thiol fluorescent probe, reduced proteins were detected in fresh peach. GSH-reduced Pru p 3 was tested in vitro for T-cell proliferation and in vivo using skin prick testing. GSH-reduced Pru p 3 produced variable skin prick reactions in peach-allergic patients. The proliferative response of peripheral blood mononuclear cells from allergic patients to reduced Pru p 3 tended to be less intense, whereas secretion of the cytokines IFN-γ, IL-5, and IL-10 was comparable. In a pool of sera from peach-allergic patients, reduction hardly impaired IgE-binding. Moreover, the stability of reduced Pru p 3 to gastrointestinal digestion was similar to that of the natural form. GSH can at least transiently reduce Pru p 3. We found that the effect of reduction on the allergenicity of Pru p 3 varied. Therefore, as an additive, GSH does not seem to eliminate the risk of reactions for peach-allergic patients.

Note related to the examination of fitness to service of the vessel bottom and cover of the Flamanville EPR reactor. Pedagogical sheet: Analysis of consequences of the fabrication anomaly of the Flamanville EPR reactor vessel bottom and cover

International Nuclear Information System (INIS)

2017-01-01

After having recalled the context related to the discovery of a fabrication anomaly in the chemical composition of the steel used in the central part of the vessel cover and bottom of the Flamanville EPR reactor, this report presents the approach proposed and adopted by Areva for the justification of the mechanical strength of the vessel cover and bottom. It indicates the main conclusions of the IRSN and ASN on various issues addressed by the audit performed by AREVA: fabrication controls, material characterisation, thermal-mechanical loadings, mechanical analysis of a risk of sudden failure. The next part proposes a pedagogical sheet of consequences of a fabrication anomaly: presentation of vessel structure and specificities, report of the discovery of this anomaly and main consequence (steel embrittlement), expertise approach, expertise conclusions (control of the absence of any deleterious defect, characterisation of material mechanical properties, assessment of thermal-mechanical loadings, assessment of a risk of sudden failure, and in-service follow-up)

Postharvest biological control of brown rot in peaches after cold storage preceded by preharvest chemical control 1

Directory of Open Access Journals (Sweden)

Elizandra Pivotto Pavanello

2015-12-01

Full Text Available ABSTRACT Pathogenic fungi cause skin darkening and peach quality depreciation in post harvest. Therefore, alternative techniques to chemical treatment are necessary in order to reduce risks to human health. The aim of this study was to evaluate the effect of the application of Trichoderma harzianum in association with different fungicides applied before harvest to 'Eldorado' peaches for brown rot control and other quality parameters during storage. The treatments consisted of five preharvest fungicide applications (control, captan, iprodione, iminoctadine and tebuconazole associated with postharvest application of T. harzianum, after cold storage (with and without application, in three evaluation times (zero, two and four days at 20 °C, resulting in a 5x2x3 factorial design. The application of T. harzianum only brought benefits to the control of brown rot when combined with the fungicide captan, at zero day shelf life. After two days, there was a greater skin darkening in peaches treated with T. harzianum compared with peaches without the treatment, except for peaches treated with the fungicide iprodione and T. harzianum The application of T. harzianum during postharvest showed no benefits for the control of brown rot, however, the association with fungicides reduced the incidence of Rhizopus stolonifer during the shelf life.

Bottom-mounted control rod drive mechanism for KJRR

Energy Technology Data Exchange (ETDEWEB)

Lee, Jin Haeng; Kim, Sanghaun; Yoo, Yeon-Sik, E-mail: yooys@kaeri.re.kr; Cho, Yeong-Garp; Huh, Hyung; Lee, Hyokwang; Sun, Jong-Oh; Ryu, Jeong-Soo

2016-04-15

Highlights: • The basic design features and characteristics of the KJRR BMCRDM are described. • The similarities and differences of some research reactor CRDMs are compared. • The current status of the design and development of the CRDM is described. • The future plan of the qualification tests of the CRDM is summarized. - Abstract: The KIJANG research reactor (KJRR), which is currently being designed by Korea Atomic Energy Research Institute, is a pool type research reactor with 15 MW of thermal power. Contrary to the top-mounted control rod drive mechanism (CRDM), the main drive mechanism of the KJRR CRDM is located in a reactivity control mechanism room under the reactor pool bottom. Recently, we accomplished the design and development of a prototype CRDM. In this paper, we introduce the basic design concept of the bottom-mounted CRDM for KJRR, and compare the similarities and differences of some research reactor CRDMs. The current status of the prototype CRDM development based on a finite element analysis and experimental verification, and the future plan of the CRDM qualification tests, are both described.

Personnel radiation exposure in HTGR plants

International Nuclear Information System (INIS)

Su, S.; Engholm, B.A.

1981-01-01

Occupational radiation exposures in high-temperature gas-cooled reactor (HTGR) plants were assessed. The expected rate of dose accumulations for a large HTGR steam cycle unit is 0.07 man-rem/MW(e)y, while the design basis is 0.17 man-rem/MW(e)y. The comparable figure for actual light water reactor experience is 1.3 man-rem/MW(e)y. The favorable HTGR occupational exposure is supported by results from the Peach Bottom Unit No. 1 HTGR and Fort St. Vrain HTGR plants and by operating experience at British gas-cooled reactor stations

Application of autoregressive methods and Lyapunov coefficients for instability studies of nuclear reactors

International Nuclear Information System (INIS)

Aruquipa Coloma, Wilmer

2017-01-01

Nuclear reactors are susceptible to instability, causing oscillations in reactor power in specific working regions characterized by determined values of power and coolant mass flow. During reactor startup, there is a greater probability that these regions of instability will be present; another reason may be due to transient processes in some reactor parameters. The analysis of the temporal evolution of the power reveals a stable or unstable process after the disturbance in a light water reactor of type BWR (Boiling Water Reactor). In this work, the instability problem was approached in two ways. The first form is based on the ARMA (Autoregressive Moving Average models) model. This model was used to calculate the Decay Ratio (DR) and natural frequency (NF) of the oscillations, parameters that indicate if the one power signal is stable or not. In this sense, the DRARMA code was developed. In the second form, the problems of instability were analyzed using the classical concepts of non-linear systems, such as Lyapunov exponents, phase space and attractors. The Lyapunov exponents quantify the exponential divergence of the trajectories initially close to the phase space and estimate the amount of chaos in a system; the phase space and the attractors describe the dynamic behavior of the system. The main aim of the instability phenomena studies in nuclear reactors is to try to identify points or regions of operation that can lead to power oscillations conditions. The two approaches were applied to two sets of signals. The first set comes from signals of instability events of the commercial Forsmark reactors 1 and 2 and were used to validate the DRARMA code. The second set was obtained from the simulation of transient events of the Peach Bottom reactor; for the simulation, the PARCS and RELAP5 codes were used for the neutronic/thermal hydraulic coupling calculation. For all analyzes made in this work, the Matlab software was used due to its ease of programming and

Fast-neutron nuclear reactor vessel

International Nuclear Information System (INIS)

Presciuttini, L.

1984-01-01

The reactor vessel comprises a cylindrical shell, of which axis is vertical, coupled at its lower part with a dished bottom. The reactor core rests on a support plate bearing on the bottom of the vessel. The above dished bottom comprises a spherical sector having the same radius and the same axis as the cylindrical shell and joining the lower part of the shell, and a spherical head of which radius is a little more important than the spherical sector one. A cylindrical support for the reactor core is attached to the vessel at the joint between the two dished sections. The invention applies more particularly to integrated type reactors cooled by liquid sodium [fr

Comparative Transcriptome and Microscopy Analyses Provide Insights into Flat Shape Formation in Peach (Prunus persica

Directory of Open Access Journals (Sweden)

Jian Guo

2018-01-01

Full Text Available Fruit shape is an important external characteristic that consumers use to select preferred fruit cultivars. In peach, the flat fruit cultivars have become more and more popular worldwide. Genetic markers closely linking to the flat fruit trait have been identified and are useful for marker-assisted breeding. However, the cellular and genetic mechanisms underpinning flat fruit formation are still poorly understood. In this study, we have revealed the differences in fruit cell number, cell size, and in gene expression pattern between the traditional round fruit and modern flat fruit cultivars. Flat peach cultivars possessed significantly lower number of cells in the vertical axis because cell division in the vertical direction stopped early in the flat fruit cultivars at 15 DAFB (day after full bloom than in round fruit cultivars at 35 DAFB. This resulted in the reduction in vertical development in the flat fruit. Significant linear relationship was observed between fruit vertical diameter and cell number in vertical axis for the four examined peach cultivars (R2 = 0.9964 at maturation stage, and was also observed between fruit vertical diameter and fruit weight (R2 = 0.9605, which indicated that cell number in vertical direction contributed to the flat shape formation. Furthermore, in RNA-seq analysis, 4165 differentially expressed genes (DEGs were detected by comparing RNA-seq data between flat and round peach cultivars at different fruit development stages. In contrast to previous studies, we discovered 28 candidate genes potentially responsible for the flat shape formation, including 19 located in the mapping site and 9 downstream genes. Our study indicates that flat and round fruit shape in peach is primarily determined by the regulation of cell production in the vertical direction during early fruit development.

Intake, digestibility and performance of lambs fed diets containing peach palm meal.

Science.gov (United States)

dos Santos, Alana Batista; Pereira, Mara Lúcia Albuquerque; de Oliveira Silva, Herymá Giovane; de Carvalho, Gleidson Giordano Pinto; de Jesus Pereira, Taiala Cristina; Ribeiro, Leandro Sampaio Oliveira; Azevêdo, José Augusto Gomes; das Graças Conceição Parada Costa Silva, Maria; Sousa, Larisse Borges; Sousa, Leandro Borges; de Oliveira Alencar, Daiane

2016-03-01

The aim of this study was to evaluate the intake and apparent digestibility of nutrients, performance, and plasma glucose concentration of ram lambs fed diets containing peach palm meal substituting maize (0, 10, 40, 60, and 85 % dry matter (DM)). Thirty Santa Inês rams with an average initial body weight of 21.6 ± 0.87 kg were distributed in a completely randomized design with five diets and six replicates. The substitution of the maize for the peach palm meal affected (P < 0.05) the intakes of DM, organic matter (OM), crude protein (CP), neutral detergent fiber corrected for ash and protein (NDFap), total carbohydrates (TC), total digestible nutrients (TDN), and metabolizable energy (ME), which decreased linearly (P < 0.05); the intake of ether extract (EE), however, fit an increasing linear equation (P < 0.05). The apparent digestibility coefficients of DM, OM, NDFap, and TC decreased linearly (P < 0.05) as the level of peach palm meal in the concentrate was increased. The total weight gain and the average daily gain decreased by 0.09 and 0.001 kg with each level of substitution of the maize for peach palm meal, respectively. It is recommended to substitute 40 % of the maize for peach palm meal.

Mutation scanning of peach floral genes

Directory of Open Access Journals (Sweden)

Wilde H Dayton

2011-05-01

Full Text Available Abstract Background Mutation scanning technology has been used to develop crop species with improved traits. Modifications that improve screening throughput and sensitivity would facilitate the targeted mutation breeding of crops. Technical innovations for high-resolution melting (HRM analysis are enabling the clinic-based screening for human disease gene polymorphism. We examined the application of two HRM modifications, COLD-PCR and QMC-PCR, to the mutation scanning of genes in peach, Prunus persica. The targeted genes were the putative floral regulators PpAGAMOUS and PpTERMINAL FLOWER I. Results HRM analysis of PpAG and PpTFL1 coding regions in 36 peach cultivars found one polymorphic site in each gene. PpTFL1 and PpAG SNPs were used to examine approaches to increase HRM throughput. Cultivars with SNPs could be reliably detected in pools of twelve genotypes. COLD-PCR was found to increase the sensitivity of HRM analysis of pooled samples, but worked best with small amplicons. Examination of QMC-PCR demonstrated that primary PCR products for further analysis could be produced from variable levels of genomic DNA. Conclusions Natural SNPs in exons of target peach genes were discovered by HRM analysis of cultivars from a southeastern US breeding program. For detecting natural or induced SNPs in larger populations, HRM efficiency can be improved by increasing sample pooling and template production through approaches such as COLD-PCR and QMC-PCR. Technical advances developed to improve clinical diagnostics can play a role in the targeted mutation breeding of crops.

Appraisal of genetic diversity of different peach cultivars and genotypes through rapd markers

International Nuclear Information System (INIS)

Bakht, J.; Jamal, N.; Shafi, M

2012-01-01

The present study was amid to investigate the genetic diversity of twenty peach cultivars and genotypes by RAPD primers at the Institute of Biotechnology and Genetic Engineering, KPK Agricultural University Peshawar. The result indicated that fifteen primers (GLCO9, GLC20, GLA20, GLA13, GLB10, GLB20, GLB06, GLB19, GLA19, GLB19, GLD16, GLB15, GLA15, GLB12, GLB11) gave genetic distance among the peach cultivars and genotypes under study by PCR amplification. Average genetic diversity (estimated as genetic distance) ranged between 12 and 58%. The molecular size of most of the bands were from 150 bp to 1000 bp. Based on dendrogram analysis, Khyber 1 and Khyber 2 was grouped in cluster A, and Tex-A6-69 and BY-8-135 in cluster B, Candan and 6A were most closely related cultivars and genotypes among the 20 peach cultivars and genotypes while Lering, Flam crest, Tex x-9, early grand and Floradaking were distinctly grouped when compared with the rest of population. (author)

Effect of the addition of peach palm (Bactris gasipaes peel flour on the color and sensory properties of cakes

Directory of Open Access Journals (Sweden)

Jader MARTÍNEZ-GIRÓN

Full Text Available Abstract This study aimed to evaluate the color and sensorial characteristics of a cake made with different amounts of flour made with peach palm peel flour. The flour was added at different concentrations, 2.5, 5.0, 7.5, and 10% (w/w, including a control (tartrazine. Physiochemical analyses were carried out on the cakes, including total carotenoids, CIE-L*a*b* color coordinates, and sensorial attributes. The results demonstrated that the peach palm peel flour substitution increased the total carotenoid content of the cakes. The color test showed that high levels of peach palm peel flour resulted in a decrease in the values of lightness (L* and hue angle (h°, while the values of browning index (BI and color change (ΔE* increased significantly. The qualification of the sensorial evaluation indicated that the quality attributes were acceptable in the cakes made with wheat flour and 7.5% peach palm peel flour. Therefore, it was concluded that flour obtained from peach palm peel is a by-product that can be used as a natural food dye alternative in bread products.

Co-combustion of peach and apricot stone with coal in a bubbling fluidized bed

Energy Technology Data Exchange (ETDEWEB)

Atimtay, Aysel T.; Kaynak, Burcak [Department of Environmental Engineering, Middle East Technical University, Ankara 06531 (Turkey)

2008-02-15

In this study a bubbling fluidized bed combustor (BFBC) having an inside diameter of 102 mm and a height of 900 mm was used to investigate the co-combustion characteristics of peach and apricot stones produced as a waste from the fruit juice industry with coal. A lignite coal was used for co-combustion. On-line concentrations of O{sub 2}, CO, CO{sub 2}, SO{sub 2}, NO{sub X} and total hydrocarbons (C{sub m}H{sub n}) were measured in the flue gas during combustion experiments. Variations of emissions of various pollutants were studied by changing the operating parameters (excess air ratio, fluidization velocity, and fuel feed rate). Temperature distribution along the bed was measured with thermocouples. For co-combustion of apricot and peach fruit stones with a lignite coal, various ratios of biomass to coal ranging from 0 to 100 wt.% were tested. For the peach stone co-combustion tests, efficiencies are about 98% and for the apricot stone co-combustion tests, efficiencies ranged between 94.7% and 96.9% for 25%, 50% and 75% of apricot stone in the fuel mixture. The results of this study have shown that as the biomass ratio in the fuel mixture increases, the combustion takes place at the upper regions of the main column. This causes higher temperatures in the freeboard than the bed. Also the CO and hydrocarbon (C{sub m}H{sub n}) emissions increase as the biomass percentage increases in the fuel mixture. This causes decrease in the combustion efficiency. These results suggest that peach and apricot stones are potential fuels that can be utilized for clean energy production in small-scale fruit juice industries by using BFBC. The percentage of peach stones or apricot stones in the fuel mixture is suggested to be below 50 wt.% in order to obtain the emission limits of EU. During the design of the BFBC, one has to be careful about the volatile matter (VM) content of the biomass. For the complete combustion of the VM, longer freeboard or secondary air addition should be

The stand prototype of minimum power NRE reactor

International Nuclear Information System (INIS)

Belogurov, A.I.; Grigorenko, L.N.; Mamontov, Yu.I.; Rachuk, V.S.; Stukalov, A.I.; Konyukhov, G.V.

1995-01-01

For ensuring of full-scale development of nuclear rocket engine (NRE) reactor was created stand prototype (reactor IRGIT?) The main differences of its are as follows: 1) Fasteners of technologies channels contents fuel assemblies in bottom are worked out the split. It is provides possibility a distance channels change without disassembly of reactor stand prototype from stand; 2) Cooling of the vessels, the moderator, the reflector and the barrel actuate is carried out by hydrogen; 3) The lower bottom modified for organization the hydrogen efflux in the form a reactor jet; 4) Radiation defence is introduced as part of stand prototype for ensuring of serviceability of stand accessories and tests routine service; 5) Each technology channels is provided of critical nozzle; 6) Control, regulation and defence of reactor has being carried out on stand system

Preliminary materials selection issues for the next generation nuclear plant reactor pressure vessel.

Energy Technology Data Exchange (ETDEWEB)

Natesan, K.; Majumdar, S.; Shankar, P. S.; Shah, V. N.; Nuclear Engineering Division

2007-03-21

In the coming decades, the United States and the entire world will need energy supplies to meet the growing demands due to population increase and increase in consumption due to global industrialization. One of the reactor system concepts, the Very High Temperature Reactor (VHTR), with helium as the coolant, has been identified as uniquely suited for producing hydrogen without consumption of fossil fuels or the emission of greenhouse gases [Generation IV 2002]. The U.S. Department of Energy (DOE) has selected this system for the Next Generation Nuclear Plant (NGNP) Project, to demonstrate emissions-free nuclear-assisted electricity and hydrogen production within the next 15 years. The NGNP reference concepts are helium-cooled, graphite-moderated, thermal neutron spectrum reactors with a design goal outlet helium temperature of {approx}1000 C [MacDonald et al. 2004]. The reactor core could be either a prismatic graphite block type core or a pebble bed core. The use of molten salt coolant, especially for the transfer of heat to hydrogen production, is also being considered. The NGNP is expected to produce both electricity and hydrogen. The process heat for hydrogen production will be transferred to the hydrogen plant through an intermediate heat exchanger (IHX). The basic technology for the NGNP has been established in the former high temperature gas reactor (HTGR) and demonstration plants (DRAGON, Peach Bottom, AVR, Fort St. Vrain, and THTR). In addition, the technologies for the NGNP are being advanced in the Gas Turbine-Modular Helium Reactor (GT-MHR) project, and the South African state utility ESKOM-sponsored project to develop the Pebble Bed Modular Reactor (PBMR). Furthermore, the Japanese HTTR and Chinese HTR-10 test reactors are demonstrating the feasibility of some of the planned components and materials. The proposed high operating temperatures in the VHTR place significant constraints on the choice of material selected for the reactor pressure vessel for

Somatic Embryogenesis in Peach-Palm (Bactris gasipaes) Using Different Explant Sources.

Science.gov (United States)

Steinmacher, Douglas A; Heringer, Angelo Schuabb; Jiménez, Víctor M; Quoirin, Marguerite G G; Guerra, Miguel P

2016-01-01

Peach palm (Bactris gasipaes Kunth) is a member of the family Arecaceae and is a multipurpose but underutilized species. Nowadays, fruit production for subsistence and local markets, and heart-of-palm production for local, national, and international markets are the most important uses of this plant. Conventional breeding programs in peach palm are long-term efforts due to the prolonged generation time, large plant size, difficulties with controlled pollination and other factors. Although it is a caespitose palm, its propagation is currently based on seeds, as off-shoots are difficult to root. Hence, tissue culture techniques are considered to be the most likely strategy for efficient clonal plantlet regeneration of this species. Among various techniques, somatic embryogenesis offers the advantages of potential automated large-scale production and putative genetic stability of the regenerated plantlets. The induction of somatic embryogenesis in peach palm can be achieved by using different explant sources including zygotic embryos, immature inflorescences and thin cell layers from the young leaves and shoot meristems. The choice of a particular explant depends on whether clonal propagation is desired or not, as well as on the plant conditions and availability of explants. Protocols to induce and express somatic embryogenesis from different peach palm explants, up to acclimatization of plantlets, are described in this chapter.

A Non-Targeted Approach Unravels the Volatile Network in Peach Fruit

Science.gov (United States)

Sánchez, Gerardo; Besada, Cristina; Badenes, María Luisa; Monforte, Antonio José; Granell, Antonio

2012-01-01

Volatile compounds represent an important part of the plant metabolome and are of particular agronomic and biological interest due to their contribution to fruit aroma and flavor and therefore to fruit quality. By using a non-targeted approach based on HS-SPME-GC-MS, the volatile-compound complement of peach fruit was described. A total of 110 volatile compounds (including alcohols, ketones, aldehydes, esters, lactones, carboxylic acids, phenolics and terpenoids) were identified and quantified in peach fruit samples from different genetic backgrounds, locations, maturity stages and physiological responses. By using a combination of hierarchical cluster analysis and metabolomic correlation network analysis we found that previously known peach fruit volatiles are clustered according to their chemical nature or known biosynthetic pathways. Moreover, novel volatiles that had not yet been described in peach were identified and assigned to co-regulated groups. In addition, our analyses showed that most of the co-regulated groups showed good intergroup correlations that are therefore consistent with the existence of a higher level of regulation orchestrating volatile production under different conditions and/or developmental stages. In addition, this volatile network of interactions provides the ground information for future biochemical studies as well as a useful route map for breeding or biotechnological purposes. PMID:22761719

Investigation of energy inputs for peach production using sensitivity analysis in Iran

International Nuclear Information System (INIS)

Royan, Mahsa; Khojastehpour, Mehdi; Emadi, Bagher; Mobtaker, Hassan Ghasemi

2012-01-01

Highlights: ► We investigated energy use and inputs–output relationship in peach production. ► Total energy consumption in peach production was 37536.96 MJ ha −1 . ► Diesel fuel with about (26.32%) was the major energy consumer. ► Energy use efficiency and energy productivity were 0.55 and 0.29 kg MJ −1 . ► The machinery energy was the most significant input affecting the output level. - Abstract: The purpose of this research was to investigate the energy balance between the energy inputs and yield in peach production in Golestan province of Iran as a case study. The results showed that total energy consumption in peach production was 37536.96 MJ ha −1 where the diesel fuel with about (26.32%) was the major energy consumer. The direct energy shared about (50.98%) whereas the indirect energy did (49.02%). Energy use efficiency, energy productivity, specific energy and net energy were 0.55, 0.29 kg MJ −1 , 3.41 MJ kg −1 and −16642.03 MJ ha −1 , respectively. Econometric assessment results revealed that the energy inputs of human labor, machinery, diesel fuel, chemical fertilizers and farm yard manure had significant influence on the yield. The impact of human labor energy (1.36) was found as the highest among the other input parameters. Sensitivity analysis indicated that the MPP value of energy inputs was between −2.8 and 11.31. Also the MPP value of human labor was the highest, followed by diesel fuel and farm yard manure energy inputs, respectively.

Ultrasound Assisted Extraction of Phenolic Compounds from Peaches and Pumpkins

Science.gov (United States)

Altemimi, Ammar; Watson, Dennis G.; Choudhary, Ruplal; Dasari, Mallika R.; Lightfoot, David A.

2016-01-01

The ultrasound-assisted extraction (UAE) method was used to optimize the extraction of phenolic compounds from pumpkins and peaches. The response surface methodology (RSM) was used to study the effects of three independent variables each with three treatments. They included extraction temperatures (30, 40 and 50°C), ultrasonic power levels (30, 50 and 70%) and extraction times (10, 20 and 30 min). The optimal conditions for extractions of total phenolics from pumpkins were inferred to be a temperature of 41.45°C, a power of 44.60% and a time of 25.67 min. However, an extraction temperature of 40.99°C, power of 56.01% and time of 25.71 min was optimal for recovery of free radical scavenging activity (measured by 1, 1-diphenyl-2-picrylhydrazyl (DPPH) reduction). The optimal conditions for peach extracts were an extraction temperature of 41.53°C, power of 43.99% and time of 27.86 min for total phenolics. However, an extraction temperature of 41.60°C, power of 44.88% and time of 27.49 min was optimal for free radical scavenging activity (judged by from DPPH reduction). Further, the UAE processes were significantly better than solvent extractions without ultrasound. By electron microscopy it was concluded that ultrasonic processing caused damage in cells for all treated samples (pumpkin, peach). However, the FTIR spectra did not show any significant changes in chemical structures caused by either ultrasonic processing or solvent extraction. PMID:26885655

Conceptual Design of Bottom-mounted Control Rod Drive Mechanism

International Nuclear Information System (INIS)

Lee, Jin Haeng; Kim, Sanghaun; Yoo, Yeonsik; Cho, Yeonggarp; Kim, Dongmin; Kim, Jong In

2013-01-01

The arrangement of the BMCRDMs and irradiation holes in the core is therefore easier than that of the top-mounted CRDM. Hence, many foreign research reactors, such as JRR-3M, JMTR, OPAL, and CARR, have adopted the BMCRDM concept. The purpose of this paper is to introduce the basic design concept on the BMCRDM. The major differences of the CRDMs between HANARO and KJRR are compared, and the design features and individual system of the BMCRDM for the KJRR are described. The Control Rod Drive Mechanism (CRDM) is a device to regulate the reactor power by changing the position of a Control Absorber Rod (CAR) and to shut down the reactor by fully inserting the CAR into the core within a specified time. The Bottom-Mounted CRDM (BMCRDM) for the KiJang Research Reactor (KJRR) is a quite different design concept compared to the top-mounted CRDM such as HANARO and JRTR. The main drive mechanism of the BMCRDM is located in a Reactivity Control Mechanism (RCM) room under the reactor pool bottom, which makes the interference with equipment in the reactor pool reduced

Conceptual Design of Bottom-mounted Control Rod Drive Mechanism

Energy Technology Data Exchange (ETDEWEB)

Lee, Jin Haeng; Kim, Sanghaun; Yoo, Yeonsik; Cho, Yeonggarp; Kim, Dongmin; Kim, Jong In [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2013-05-15

The arrangement of the BMCRDMs and irradiation holes in the core is therefore easier than that of the top-mounted CRDM. Hence, many foreign research reactors, such as JRR-3M, JMTR, OPAL, and CARR, have adopted the BMCRDM concept. The purpose of this paper is to introduce the basic design concept on the BMCRDM. The major differences of the CRDMs between HANARO and KJRR are compared, and the design features and individual system of the BMCRDM for the KJRR are described. The Control Rod Drive Mechanism (CRDM) is a device to regulate the reactor power by changing the position of a Control Absorber Rod (CAR) and to shut down the reactor by fully inserting the CAR into the core within a specified time. The Bottom-Mounted CRDM (BMCRDM) for the KiJang Research Reactor (KJRR) is a quite different design concept compared to the top-mounted CRDM such as HANARO and JRTR. The main drive mechanism of the BMCRDM is located in a Reactivity Control Mechanism (RCM) room under the reactor pool bottom, which makes the interference with equipment in the reactor pool reduced.

Phenotypic characterization of qualitative parameters and antioxidant contents in peach and nectarine fruit and changes after jam preparation.

Science.gov (United States)

Drogoudi, Pavlina; Gerasopoulos, Dimitrios; Kafkaletou, Mina; Tsantili, Eleni

2017-08-01

Sugars and antioxidants in peaches contribute to fresh fruit quality and nutrition; however, information on widely grown cultivars and changes induced after peach jam preparation is limited. In the present study, colour, sugars and antioxidant parameters were determined in fruit and jam from 45 peach and nectarine cultivars. Pronounced varietal differences were found in sorbitol (42-fold range), total phenolics (TPs) and antioxidant capacities (10- to 19-fold range). Sorbitol levels were greater in non-melting peach, followed by nectarine, and lower values were found in melting peach cultivars. Late-harvested peach and nectarine cultivars tended to have a higher soluble solid content and antioxidant potential. Cultivars with relatively high antioxidant contents produced darker and redder jams, containing more antioxidants, than the jam or the fruit from the other cultivars. Jam-TPs were reduced by 48% compared to fruit-TPs, with greater reduction being noted in high antioxidant cultivars. The most favorable jam organoleptic characteristics were found in 'Morsiani 90', 'Amiga', 'Romea' and 'Alirosada', as well as in non-melting compared to melting peach cultivars. The best cultivars for each fruit flesh type and jam were identified. Peach jam could be an alternative substitute when fresh fruit is not available and when it is prepared with high antioxidant cultivars. © 2016 Society of Chemical Industry. © 2016 Society of Chemical Industry.

Decontamination of Beaver Valley steam generators using the CAN-DEREM process

International Nuclear Information System (INIS)

Speranzini, R.A.; Helms, M.

1991-08-01

Three steam generator channelheads at the Beaver Valley Unit 1 Power Station were decontaminated in September and October of 1989 using the CAN-DEREM process. With system volumes of about 12 000 L for each steam generator, this was the first major application of the CAN-DEREM process, following closely after the successful 1989 April CAN-DEREM decontamination of a 1000 L Indian Point-2 recirculating heat exchanger. The Successful applications were the culmination of several years of laboratory study directed at assessing and subsequently altering the CAN-DECON formulation. The studies were initiated after the CAN-DECON process was implicated in causing intergranular attack in sensitized 304 stainless steel after the Peach Bottom-2 recirculating water cooling unit (RWCU) decontamination in early 1984. The degree of attack was similar to that observed on piping from several early Boiling Water Reactors, and this was the only instance of reactor artifacts revealing intergranular attack after a CAN-DECON decontamination. Nevertheless, utilities were reluctant to use CAN-DECON after the Peach Bottom-2 decontamination. In response the utility concerns, the CAN-DECON formulation was modified to produce the even-less-corrosive CAN-DEREM formulation. In this report, the results of the laboratory corrosion study are briefly summarized along with the results of pre-decontamination assessments using Beaver Valley specimens, and the results of the actual steam generator decontaminations. The results show quite clearly the decontamination effectiveness and the low corrosiveness of the CAN-DEREM process. As a result of the successful laboratory program and demonstrations, the CAN-DEREM process is currently being qualified for use in full heat transport systems of Pressurized Water Reactors in a major program being carried out by Westinghouse in the United States

Occupational Allergy to Peach (Prunus persica) Tree Pollen and Potential Cross-Reactivity between Rosaceae Family Pollens.

Science.gov (United States)

Jiang, Nannan; Yin, Jia; Mak, Philip; Wen, Liping

2015-10-01

Orchard workers in north China are highly exposed to orchard pollens, especially peach and other Rosaceae family pollens during pollination season. The aim of this study was to investigate whether occupational allergy to peach tree pollen as a member of Rosaceae family is IgE-mediated and to evaluate the cross-reactivity among Rosaceae family pollens. Allergen skin test and conjunctival challenge test were performed; enzyme linked immune-sorbent assay (ELISA), inhibiting ELISA, western immunoblotting and inhibiting western immunoblotting were done with Rosaceae family orchard pollens, including peach, apricot, cherry, apple and pear tree pollens. Mass spectrometry was also performed to probe the main allergen component and cross-reactive protein. Sensitizations to peach pollen were found in both skin test and conjunctival challenge in the patients. Serum specific IgE to three pollens (peach, apricot and cherry) were detected through ELISA. When peach pollen used as solid phase, ELISA inhibition revealed other four kinds of pollens capable of inducing partial to strong inhibitions (45% to 87%), with the strongest inhibition belonging to apricot pollen (87%). Western blotting showed predominant IgE binding to a 20 KD protein among these pollens, which appeared to be a cross-reactive allergen component through western blotting inhibition. It was recognized as a protein homologous to glutathione s-transferase 16 from Arabidopsis thaliana. Peach and other Rosaceae family tree pollen may serve as a potential cause of IgE mediated occupational respiratory disease in orchard workers in north China.

Effects of infrared radiation heating on peeling performance and quality attributes of clingstone peaches

Science.gov (United States)

Salinity and wastewater disposal problems associated with the conventional wet-lye method for peeling clingstone peaches result in considerable negative environment impacts. This study investigated the efficacy of using infrared (IR) heating as an alternative method for peach peel removal without us...

Recent experiences with ultrasonic inservice inspection systems with phased array probes on spherical bottoms of boiling water reactors

International Nuclear Information System (INIS)

Wustenberg, H.; Brekow, G.; Erhard, A.; Hein, E.

1988-01-01

The special geometry of the spherical bottom of boiling water reactors with control rods and measuring nozzles requires a very special surveillance technique during the in-service inspection. Reside visual inspection an ultrasonic inspection has been established due to the requirements of German authorities. A first application of a new phased array system took place August 1987. The 100% inspection of a spherical bottom had been enabled by the application of phased array probes with electronically controlled skewing angles. The data acquisition had been based on the storage of whole A-scans, which had been pixellized into 256 points. This A-scan storage procedure makes possible the application of a simple and fast algorithm to present the data as TD-(time displacement)-scans. Defect reconstruction by echotomographique approaches are under development. This paper presents the ultrasonic technique applied including the phased array probes, the electronic system, as well as the software package used for the control of the inspection parameters depending on the probe position

Seismic attenuation system for a nuclear reactor

Energy Technology Data Exchange (ETDEWEB)

Liszkai, Tamas; Cadell, Seth

2018-01-30

A system for attenuating seismic forces includes a reactor pressure vessel containing nuclear fuel and a containment vessel that houses the reactor pressure vessel. Both the reactor pressure vessel and the containment vessel include a bottom head. Additionally, the system includes a base support to contact a support surface on which the containment vessel is positioned in a substantially vertical orientation. An attenuation device is located between the bottom head of the reactor pressure vessel and the bottom head of the containment vessel. Seismic forces that travel from the base support to the reactor pressure vessel via the containment vessel are attenuated by the attenuation device in a direction that is substantially lateral to the vertical orientation of the containment vessel.

Pool-type reactor

International Nuclear Information System (INIS)

Hopkins, S.R.

1977-01-01

This invention relates to a pool nuclear reactor fitted with a perfected system to raise the buckets into a vertical position at the bottom of a channel. This reactor has an inclined channel to guide a bucket containing a fuel assembly to introduce it into the reactor jacket or extract it therefrom and a damper at the bottom of the channel to stop the drop of the bucket. An upright vertically movable rod has a horizontally articulated arm with a hook. This can pivot to touch a radial lug on the bucket and pivot the bucket around its base in a vertical position, when the rod moves up [fr

Silage or fresh by-product of peach palm as roughage in the feeding of lambs.

Science.gov (United States)

dos Santos Cabral, Ícaro; Azevêdo, José Augusto Gomes; de Almeida, Flávio Moreira; Pereira, Luiz Gustavo Ribeiro; de Araújo, Gherman Garcia Leal; Nogueira, Abdon Santos; Souza, Lígia Lins; de Oliveira, Gisele Andrade; de Oliveira Filho, Carlos Alberto Alves

2015-03-01

The objective of this study was to evaluate intake and apparent digestibility of agro-industrial by-product of peach palm in diets for lambs. Twenty castrated, crossbred Santa Ines lambs, with average age of 150 days and body weight of 22.4 ± 3.4 kg, were distributed in a completely randomized design with four experimental diets composed of the following: fresh by-product of peach palm enriched with urea + ammonia sulfate (FU); fresh peach palm by-product + concentrate (FP); silage of peach palm by-product + concentrate (SP); and silage of peach palm by-product enriched with 15% of cornmeal + concentrate (SPC). Intake was recorded daily, and the digestibility coefficients were estimated with the internal marker indigestible acid detergent fiber (iADF). Diet FU resulted in the lowest intake and digestibility of the nutrients evaluated. Animals receiving diet FP showed higher intakes of dry matter (DM), organic matter (OM), crude protein (CP), neutral detergent fiber (NDF), total digestible nutrients (TDN), and digestible energy (DE) in relation to animals fed diets SP and SPC. Diets SP and SPC showed higher coefficients of digestibility of DM, OM, CP, and NDF than diet FP. Diet SP reduced the intakes of DM, OM, ether extract (EE), non-fibrous carbohydrate (NFC), TDN, and DE and the digestibility coefficients of DM, OM, and NFC as compared with diet SPC. Feedlot lambs fed a diet with fresh peach palm by-product + concentrate (diet FP) have higher nutrient intake.

Investigation into effects of ionizing radiations on physical-chemical properties of bulgarian sorts of peaches and grapes

International Nuclear Information System (INIS)

Dimitrov, D.; Kalinov, V.; Nikolova, M.; Pavlova, E.

1974-01-01

The aim of this study was to ascertain the degree and direction of those changes in physicochemical characteristics of irradiated peaches and grapes which determine their quality after irradiation and during storage. The following main conclusions are made: irradiation with doses of 200 to 300 krad does not cause significant alterations in the chemical composition and physicochemical characteristics of peaches and grapes; irradiation has a direct effect on the consistancy of peaches and grapes, leading to their softening which is proportional to the radiation dose used; radiation treatment is advisable in the case of peaches and grapes in tended for short-term rather than long-term storage at low temperatures

Hypersensitivity to Tomato (Lycopersicon esculentum) in Peach-Allergic Patients: rPrup 3 and rPrup 1 Are Predictive of Symptom Severity.

Science.gov (United States)

Mascheri, A; Farioli, L; Pravettoni, V; Piantanida, M; Stafylaraki, C; Scibilia, J; Mirone, C; Preziosi, D; Nichelatti, M; Pastorello, E A

2015-01-01

Background: The role of allergens in the severity of tomato allergy symptoms has not yet been studied. To evaluate the relationship between severe allergic reactions to peach and tomato and between tomato allergy symptoms and the pattern of IgE positivity for rPru p 1, rPru p 3, rPru p 4, rBetv 1, rBetv 2, rBetv4, rPhl p 1, and rPhl p 12 in order to identify the role of recombinant allergens in the severity of reactions to tomato. We studied peach-allergic patients with clinical reactions to tomato by performing an open food challenge, skin prick test, and determination of serum specific IgE to tomato and to recombinant peach, birch, and grass allergens. Statistical analysis was carried out to evaluate the relationship between the severity of tomato symptoms and IgE positivity to the different allergens and to peach-induced symptoms. We found a significant association between severe reactions to tomato and severe reactions to peach (P = .01 7) and levels of IgE to rPru p3 (P = .029) and between mild tomato allergy symptoms and levels of IgE to rPru p1 (P = .047), anti-rBetv 1 (P = .0414), anti-rBetv 2 (P = .0457), and Phleum pratense (P = .0022). We observed a significant relationship between peach and symptoms of tomato allergy. IgE positivity for rPru p3 seems to be a surrogate biochemical marker for severe tomato allergy, whereas the presence of anti-rPru p 1 IgE may be an indicator of mild tomato allergy.

Difference in photosynthetic performance among three peach ...

African Journals Online (AJOL)

The effects of low photosynthetic photon flux density (PPFD) on greenhouse grown peach trees ('Qingfeng': Prunus persica L. Batsch, 'NJN76': Prunus persica L. Batsch and 'Maixiang': P. persica var. nectarine) were investigated. Difference in photosynthesis rate (Pn) and stoma morphology among cultivars were studied.

General outline of the operation and utilization of the BR2 reactor

International Nuclear Information System (INIS)

Baugnet, J.M.; Leonard, F.; Gandolfo, J.M.; Lenders, H.

1978-01-01

The BR2 reactor is a high-flux material testing reactor of the thermal heterogeneous type. The fuel is 93% 235 U enriched uranium in the form of plates clad in aluminium. The moderator consists of beryllium and light water, the water being pressurized (12.5kg/cm 2 )and acting also as coolant. The pressure vessel is of aluminium, and is placed in a pool of demineralized water. One should stress the following main features of the design: the experimental channels are skew, the tube bundle presenting the form of a hyperboloid of revolution (see figure 1)-this gives easy access at the top and bottom reactor covers allowing complex instrumented devices, while maintaining a very high neutron flux at the core; great flexibilty of utilization, due to the fact that it is possible to adapt the core configuration to the experimental loading as the fissile charge can be centred on different experimental channels; although BR2 is a thermal reactor, it is possible to achieve neutron spectra very similar to those obtained in a fast reactor, either by the use of absorbing screens or by the use of fissile material within the experimental device; five 200mm diameter channels are available for loading large experimental irradiation devices, as in-pile sodium, gas or water loops. (author)

The BR2 materials testing reactor. Past, ongoing and under-study upgradings

Energy Technology Data Exchange (ETDEWEB)

Baugnet, J M; Roedt, Ch de; Gubel, P; Koonen, E [Centre d' Etude de I' Energie Nucleaire, Studiecentrum voor Kernenergie, C.E.N./S.C.K., Mol (Belgium)

1990-05-01

The BR2 reactor (Mol, Belgium) is a high-flux materials testing reactor. The fuel is 93% {sup 235}U enriched uranium. The nominal power ranges from 60 to 100 MW. The main features of the design are the following: 1) maximum neutron flux, thermal: 1.2 x 10{sup 15} n/cm{sup 2} s; fast (E > 0.1 MeV) : 8.4 x 10{sup 14} n /cm{sup 2} s; 2) great flexibility of utilization: the core configuration and operation mode can be adapted to the experimental loading; 3) neutron spectrum tailoring; 4) availability of five 200 mm diameter channels besides the standard channels (84 mm diameter); 5) access to the top and bottom covers of the reactor authorizing the irradiation of loops. The reactor is used to study the behaviour of fuel elements and structural materials intended for future nuclear power stations of several types (fission and fusion). Irradiations are carried out in connection with performance tests up to very high burn-up or neutron fluence as well as for safety experiments, power cycling experiments, and generally speaking, tests under off-normal conditions. Irradiations for nuclear transmutation (production of high specific activity radio-isotopes and transplutonium elements), neutron-radiography, use of beam tubes for physics studies, and gamma irradiations are also carried out. The BR2 is used in support of Belgian programs, at the request of utilities, industry and universities and in the framework of international agreements. The paper reviews the past and ongoing upgrading and enhancement of reactor capabilities as well as those under study or consideration, namely with regard to: reactor equipment, fuel elements, irradiation facilities, reactor operation conditions and long-term strategy. (author)

New insights into the properties of pubescent surfaces: peach fruit as a model.

Science.gov (United States)

Fernández, Victoria; Khayet, Mohamed; Montero-Prado, Pablo; Heredia-Guerrero, José Alejandro; Liakopoulos, Georgios; Karabourniotis, George; Del Río, Víctor; Domínguez, Eva; Tacchini, Ignacio; Nerín, Cristina; Val, Jesús; Heredia, Antonio

2011-08-01

The surface of peach (Prunus persica 'Calrico') is covered by a dense indumentum, which may serve various protective purposes. With the aim of relating structure to function, the chemical composition, morphology, and hydrophobicity of the peach skin was assessed as a model for a pubescent plant surface. Distinct physicochemical features were observed for trichomes versus isolated cuticles. Peach cuticles were composed of 53% cutan, 27% waxes, 23% cutin, and 1% hydroxycinnamic acid derivatives (mainly ferulic and p-coumaric acids). Trichomes were covered by a thin cuticular layer containing 15% waxes and 19% cutin and were filled by polysaccharide material (63%) containing hydroxycinnamic acid derivatives and flavonoids. The surface free energy, polarity, and work of adhesion of intact and shaved peach surfaces were calculated from contact angle measurements of water, glycerol, and diiodomethane. The removal of the trichomes from the surface increased polarity from 3.8% (intact surface) to 23.6% and decreased the total surface free energy chiefly due to a decrease on its nonpolar component. The extraction of waxes and the removal of trichomes led to higher fruit dehydration rates. However, trichomes were found to have a higher water sorption capacity as compared with isolated cuticles. The results show that the peach surface is composed of two different materials that establish a polarity gradient: the trichome network, which has a higher surface free energy and a higher dispersive component, and the cuticle underneath, which has a lower surface free energy and higher surface polarity. The significance of the data concerning water-plant surface interactions is discussed within a physiological context.

Decolorization of textile industry wastewater in solid state fermentation with Peach-Palm (Bactris gasipaes residue

Directory of Open Access Journals (Sweden)

J. A. Chicatto

2018-02-01

Full Text Available Abstract In this work we have assessed the decolorization of textile effluents throughout their treatment in a solid-state fermentation (SSF system. SSF assays were conducted with peach-palm (Bactris gasipaes residue using the white rot fungus Ganoderma lucidum EF 31. The influence of the dye concentration and of the amounts of peach-palm residue and liquid phase on both the discoloration efficiency and enzyme production was studied. According to our results, independently of experimental conditions employed, laccase was the main ligninolytic enzyme produced by G. lucidum. The highest laccase activity was obtained at very low effluent concentrations, suggesting the existence of an inhibitory effect of higher concentrations on fungal metabolism. The highest percentage of color removal was reached when 10 grams of peach palm residue was moistened with 60 mL of the final effluent. In control tests carried out with the synthetic dye Remazol Brilliant Blue R (RBBR decolorization efficiencies about 20% higher than that achieved with the industrial effluent were achieved. The adsorption of RBBR on peach-palm residue was also investigated. Equilibrium tests showed that the adsorption of this dye followed both Langmuir and Freundlich isotherms. Hence, our experimental results indicate that peach-palm residue is suitable substrate for both laccase production and color removal in industrial effluents.

Decolorization of textile industry wastewater in solid state fermentation with Peach-Palm (Bactris gasipaes) residue.

Science.gov (United States)

Chicatto, J A; Rainert, K T; Gonçalves, M J; Helm, C V; Altmajer-Vaz, D; Tavares, L B B

2018-02-15

In this work we have assessed the decolorization of textile effluents throughout their treatment in a solid-state fermentation (SSF) system. SSF assays were conducted with peach-palm (Bactris gasipaes) residue using the white rot fungus Ganoderma lucidum EF 31. The influence of the dye concentration and of the amounts of peach-palm residue and liquid phase on both the discoloration efficiency and enzyme production was studied. According to our results, independently of experimental conditions employed, laccase was the main ligninolytic enzyme produced by G. lucidum. The highest laccase activity was obtained at very low effluent concentrations, suggesting the existence of an inhibitory effect of higher concentrations on fungal metabolism. The highest percentage of color removal was reached when 10 grams of peach palm residue was moistened with 60 mL of the final effluent. In control tests carried out with the synthetic dye Remazol Brilliant Blue R (RBBR) decolorization efficiencies about 20% higher than that achieved with the industrial effluent were achieved. The adsorption of RBBR on peach-palm residue was also investigated. Equilibrium tests showed that the adsorption of this dye followed both Langmuir and Freundlich isotherms. Hence, our experimental results indicate that peach-palm residue is suitable substrate for both laccase production and color removal in industrial effluents.

Investigation of the aroma of commercial peach (Prunus persica L. Batsch) types by Proton Transfer Reaction-Mass Spectrometry (PTR-MS) and sensory analysis

NARCIS (Netherlands)

Cardoso Ferreira Pinhancos de Bianchi, Tiago; Weesepoel, Yannick; Koot, Alex; Iglesias, Ignasi; Eduardo, Iban; Gratacós-Cubarsí, Marta; Guerrero, Luis; Hortós, Maria; Ruth, van Saskia

2017-01-01

The aim of this study was to investigate the aroma and sensory profiles of various types of peaches (Prunus persica L. Batsch.). Forty-three commercial cultivars comprising peaches, flat peaches, nectarines, and canning peaches (pavías) were grown over two consecutive harvest years. Fruits were

Susceptibility of peach GF 305 seedlings and selected herbaceous plants to plum pox virus isolates from western Slovakia.

Science.gov (United States)

Glasa, M; Matisová, J; Hricovský, I; Kúdela, O

1997-12-01

The susceptibility of peach GF 305 seedlings and herbaceous plants to five plum pox virus (PPV) isolates from orchards of western Slovakia was investigated. PPV was isolated from diseased plum, apricot and peach trees, and transmitted by chip-budding to peach GF 305. The herbaceous plants were infected by mechanical inoculation. The transmission was analysed by symptomatology and double sandwich enzyme-linked immunosorbent assay (DAS-ELISA). Infected peaches developed leaf distortion, tissue clearing along the veins and small chlorotic spots (isolate BOR-3). With exception of BOR-3, the PPV isolates transmitted from peach caused local chlorotic spots on Chenopodium foetidum. The character of symptoms changed when a sap from PPV-infected Nicotiana benthamiana was used as virus inoculum. From N. benthamiana, the PPV isolates could be transmitted to Pisum sativum, cv. Colmo (light green mosaic), N. clevelandii and N. clevelandii x N. glutinosa hybrid (latent infection or chlorotic spots).

Impact evaluation of integrated food-bioenergy systems: A comparative LCA of peach nectar

International Nuclear Information System (INIS)

De Menna, Fabio; Vittuari, Matteo; Molari, Giovanni

2015-01-01

Processed food products present high energy intensity, along with a large amount of food losses and waste. The recovery of residual biomass as integrated renewable energy source could represent an interesting option for the substitution of fossil energy, contributing to the transition of agro-food sector towards a low-carbon economy. Two scenarios were compared, in order to evaluate the impacts of a fossil fuel-based food chain and the potential benefits of the integration of bioenergy production, using peach nectar as case study. In the first scenario, peach nectar is produced, distributed and consumed using fossil energy, while residuals are wasted. In the second scenario, byproducts from the nectar chain are used to produce bioenergy from combustion or anaerobic digestion, which is then consumed to substitute electricity and heat. A comparative life cycle assessment (LCA) based on the same functional unit was performed. Main results show that, in the conventional scenario, most of the damage derives from land use, especially for sugar and glucose production, from the fossil energy consumption of about 15 MJ l −1 , and the related greenhouse gas (GHG) emissions of 0.91 kg CO 2  eq l −1 . Food waste leads to a loss of about 20 kcal l −1 . Bioenergy integration would allow a 13–15% damage reduction, mainly due to the substitution of indirect energy consumption. The effects on human health and ecosystem quality are limited. - Highlights: • Up to 15 MJ l −1 of fossil energy are needed to produce 2.7 MJ of peach nectar. • About 20 out of 648 kcal l −1 of peach and nectar are wasted along the supply chain. • Added ingredients (sugar and glucose) cause a large share of land use impact. • Bioenergy from waste reduces up to 37% of non-renewable energy consumption

Development of automated ultrasonic device for in-service inspection of ABWR pressure vessel bottom head

International Nuclear Information System (INIS)

Kojima, Y.; Matsuyama, A.

1995-01-01

An automated device and its controller have been developed for the bottom head weld examination of pressure vessel of Advanced Boiling Water Reactor (ABWR). The internal pump casings and the housings of control rod prevent a conventional ultrasonic device from scanning the required inspection zone. With this reason, it is required to develop a new device to examine the bottom head area of ABWR. The developed device is characterized by the following features. (1) Composed of a mother vehicle and a compact inspection vehicle. They are connected only by an electric wire without using the conventional arm mechanism. (2) The mother vehicle travels on a track and lift up the inspection vehicle to the vessel. (3) The mother vehicle can automatically attach the inspection vehicle to the bottom head, and detach the inspection vehicle from it. (4) Collision avoidance control function with a touch sensor is installed at the front of the inspection vehicle. The device was successfully demonstrated using a mock-up of reactor pressure vessel

Predictive uncertainty reduction in coupled neutron-kinetics/thermal hydraulics modeling of the BWR-TT2 benchmark

Energy Technology Data Exchange (ETDEWEB)

Badea, Aurelian F., E-mail: aurelian.badea@kit.edu [Karlsruhe Institute of Technology, Vincenz-Prießnitz-Str. 3, 76131 Karlsruhe (Germany); Cacuci, Dan G. [Center for Nuclear Science and Energy/Dept. of ME, University of South Carolina, 300 Main Street, Columbia, SC 29208 (United States)

2017-03-15

Highlights: • BWR Turbine Trip 2 (BWR-TT2) benchmark. • Substantial (up to 50%) reduction of uncertainties in the predicted transient power. • 6660 uncertain model parameters were calibrated. - Abstract: By applying a comprehensive predictive modeling methodology, this work demonstrates a substantial (up to 50%) reduction of uncertainties in the predicted total transient power in the BWR Turbine Trip 2 (BWR-TT2) benchmark while calibrating the numerical simulation of this benchmark, comprising 6090 macroscopic cross sections, and 570 thermal-hydraulics parameters involved in modeling the phase-slip correlation, transient outlet pressure, and total mass flow. The BWR-TT2 benchmark is based on an experiment that was carried out in 1977 in the NPP Peach Bottom 2, involving the closure of the turbine stop valve which caused a pressure wave that propagated with attenuation into the reactor core. The condensation of the steam in the reactor core caused by the pressure increase led to a positive reactivity insertion. The subsequent rise of power was limited by the feedback and the insertion of the control rods. The BWR-TT2 benchmark was modeled with the three-dimensional reactor physics code system DYN3D, by coupling neutron kinetics with two-phase thermal-hydraulics. All 6660 DYN3D model parameters were calibrated by applying a predictive modeling methodology that combines experimental and computational information to produce optimally predicted best-estimate results with reduced predicted uncertainties. Simultaneously, the predictive modeling methodology yields optimally predicted values for the BWR total transient power while reducing significantly the accompanying predicted standard deviations.

Predictive uncertainty reduction in coupled neutron-kinetics/thermal hydraulics modeling of the BWR-TT2 benchmark

International Nuclear Information System (INIS)

Badea, Aurelian F.; Cacuci, Dan G.

2017-01-01

Highlights: • BWR Turbine Trip 2 (BWR-TT2) benchmark. • Substantial (up to 50%) reduction of uncertainties in the predicted transient power. • 6660 uncertain model parameters were calibrated. - Abstract: By applying a comprehensive predictive modeling methodology, this work demonstrates a substantial (up to 50%) reduction of uncertainties in the predicted total transient power in the BWR Turbine Trip 2 (BWR-TT2) benchmark while calibrating the numerical simulation of this benchmark, comprising 6090 macroscopic cross sections, and 570 thermal-hydraulics parameters involved in modeling the phase-slip correlation, transient outlet pressure, and total mass flow. The BWR-TT2 benchmark is based on an experiment that was carried out in 1977 in the NPP Peach Bottom 2, involving the closure of the turbine stop valve which caused a pressure wave that propagated with attenuation into the reactor core. The condensation of the steam in the reactor core caused by the pressure increase led to a positive reactivity insertion. The subsequent rise of power was limited by the feedback and the insertion of the control rods. The BWR-TT2 benchmark was modeled with the three-dimensional reactor physics code system DYN3D, by coupling neutron kinetics with two-phase thermal-hydraulics. All 6660 DYN3D model parameters were calibrated by applying a predictive modeling methodology that combines experimental and computational information to produce optimally predicted best-estimate results with reduced predicted uncertainties. Simultaneously, the predictive modeling methodology yields optimally predicted values for the BWR total transient power while reducing significantly the accompanying predicted standard deviations.

Preliminary shielding design evaluation for reactor assembly of SMART

International Nuclear Information System (INIS)

Kim, Kyo Youn; Kang, Chang M.; Kim, Ha Yong; Zee, Sung Quun; Chang, Moon Hee

1999-03-01

This report describes a preliminary evaluations of SMART shielding design near the reactor core by using the DORT two-dimensional discrete ordinates transport code. The results indicate that maximum neutron fluence at the bottom of reactor vessel is 1.64x10 17 n/cm 2 and that on the radial surface of reactor vessel is 6.71x10 16 n/cm 2 . These results meet the requirement, 1.0x10 20 n/cm 2 , in 10 CFR 50.61 and the integrity of SMART reactor vessel is confirmed during the lifetime of reactor. (Author). 20 refs., 11 tabs., 8 figs

Nuclear reactor buildings

International Nuclear Information System (INIS)

Nagashima, Shoji; Kato, Ryoichi.

1985-01-01

Purpose: To reduce the cost of reactor buildings and satisfy the severe seismic demands in tank type FBR type reactors. Constitution: In usual nuclear reactor buildings of a flat bottom embedding structure, the flat bottom is entirely embedded into the rock below the soils down to the deck level of the nuclear reactor. As a result, although the weight of the seismic structure can be decreased, the amount of excavating the cavity is significantly increased to inevitably increase the plant construction cost. Cross-like intersecting foundation mats are embedded to the building rock into a thickness capable withstanding to earthquakes while maintaining the arrangement of equipments around the reactor core in the nuclear buildings required by the system design, such as vertical relationship between the equipments, fuel exchange systems and sponteneous drainings. Since the rock is hard and less deformable, the rigidity of the walls and the support structures of the reactor buildings can be increased by the embedding into the rock substrate and floor responsivity can be reduced. This enables to reduce the cost and increasing the seismic proofness. (Kamimura, M.)

Prunus hybrids rootstocks for flat peach

Directory of Open Access Journals (Sweden)

Pilar Legua

2012-02-01

Full Text Available Peach (Prunus persica L. is the most important stone fruit tree grown in Spain and is the second most important fruit crop in Europe. The influence of eight Prunus rootstocks (GF-677, Krymsk® 86, PADAC 97-36, PADAC 99-05, PADAC 9912-03, PADAC 0024-01, PAC 0021-01 and PAC 0022-01 on vigor, yield and fruit quality traits of 'UFO 3' flat peach cultivar was studied. The highest trunk cross sectional area was exhibited by GF-677 and the lowest by PADAC 99-05, while intermediate values were found on the other rootstocks. The highest yield efficiency was found on PADAC 99-05, PAC 0021-01, PAC 0022-01 and PADAC 0024-01 and the lowest was shown on Krymsk® 86. The fruit quality parameters measured were color, fruit and stone weights, equatorial diameter, pulp thickness, pulp yield, firmness, pH, soluble solids content and titratable acidity. 'UFO 3' grafted on GF-677 resulted in the largest fruit weight, while the smallest was on PADAC 99-05. Fruits of 'UFO 3' showed a tendency to have higher firmness, higher red colored skin and RI when grafted on PADAC 99-05.

Sensory evaluation of Regina freestone peaches treated with low doses of gamma radiation

International Nuclear Information System (INIS)

O'Mahony, M.; Wong, S.Y.; Odbert, N.

1985-01-01

Sensory appraisal of low post-harvest gamma irradiation dosing (65-75 Krad) of a single batch of peaches revealed significant differences in aroma and in taste components not associated with sweetness, but only slight differences in firmness and appearance. A panel of practiced judges evaluated irradiated and non-irradiated peaches using a technique of minimal cross-sensory inference. The significant differences in aroma and taste also were detected by untrained judges

Prestressed reactor vessel for nuclear power plants

International Nuclear Information System (INIS)

Schoening, J.; Schwiers, H.G.

1982-01-01

With usual pressure vessels for nuclear reactor plants, especially for gas-cooled nuclear reactors, the load occurring due to the inner overpressure, especially the tensile load affecting the vessel top and/or bottom, their axis of inertia being horizontal, shall be compensated without a supplementary modification in design of the top and/or the bottom. This is attained by choosing an appropriate prestressing system of the vessel wall in the field the top and/or the bottom, so that the top and/or the bottom form a tension vault directed towards the interior of the vessel. (orig.) [de

Chromatin-associated regulation of sorbitol synthesis in flower buds of peach.

Science.gov (United States)

Lloret, Alba; Martínez-Fuentes, Amparo; Agustí, Manuel; Badenes, María Luisa; Ríos, Gabino

2017-11-01

PpeS6PDH gene is postulated to mediate sorbitol synthesis in flower buds of peach concomitantly with specific chromatin modifications. Perennial plants have evolved an adaptive mechanism involving protection of meristems within specialized structures named buds in order to survive low temperatures and water deprivation during winter. A seasonal period of dormancy further improves tolerance of buds to environmental stresses through specific mechanisms poorly known at the molecular level. We have shown that peach PpeS6PDH gene is down-regulated in flower buds after dormancy release, concomitantly with changes in the methylation level at specific lysine residues of histone H3 (H3K27 and H3K4) in the chromatin around the translation start site of the gene. PpeS6PDH encodes a NADPH-dependent sorbitol-6-phosphate dehydrogenase, the key enzyme for biosynthesis of sorbitol. Consistently, sorbitol accumulates in dormant buds showing higher PpeS6PDH expression. Moreover, PpeS6PDH gene expression is affected by cold and water deficit stress. Particularly, its expression is up-regulated by low temperature in buds and leaves, whereas desiccation treatment induces PpeS6PDH in buds and represses the gene in leaves. These data reveal the concurrent participation of chromatin modification mechanisms, transcriptional regulation of PpeS6PDH and sorbitol accumulation in flower buds of peach. In addition to its role as a major translocatable photosynthate in Rosaceae species, sorbitol is a widespread compatible solute and cryoprotectant, which suggests its participation in tolerance to environmental stresses in flower buds of peach.

Molecular characterization of peach [Prunus persica (L.) Batsch] germplasm in the United States using microsatellite markers

Science.gov (United States)

Peach [Prunus persica (L.) Batsch] is an important medicinal fruit with immense health benefits and antioxidant activity. In this study, microsatellite markers were used as DNA fingerprinting tools for the identification and characterization of peach germplasm in the United States. Eleven microsatel...

Effects of different products of peach (Prunus persica L. Batsch) from a variety developed in southern Brazil on oxidative stress and inflammatory parameters in vitro and ex vivo

Science.gov (United States)

Gasparotto, Juciano; Somensi, Nauana; Bortolin, Rafael Calixto; Moresco, Karla Suzana; Girardi, Carolina Saibro; Klafke, Karina; Rabelo, Thallita Kelly; Morrone, Maurilio Da Silva; Vizzotto, Márcia; Raseira, Maria do Carmo Bassols; Moreira, José Claudio Fonseca; Gelain, Daniel Pens

2014-01-01

Antioxidant, anti-glycation and anti-inflammatory activities of fresh and conserved peach fruits (Prunus persica L. Batsch) were compared. Fresh peach pulps, peels, preserve peach pulps and the preserve syrup were prepared at equal concentrations. Rat liver, kidney and brain cortex tissue slices were pre-incubated with peach samples, subjected to oxidative stress with FeSO4 and hydrogen peroxide. Fresh peach pulps and peel conferred higher protection against cytotoxicity and oxidative stress than preserve peach pulps in most tissues. Release of tumor necrosis factor-α and interleukin-1β was also significantly decreased by Fresh peach pulps and peel, followed by preserve peach pulps. Total phenolic determination and HPLC analysis of carotenoids showed that the content of secondary metabolites in Fresh peach pulps and peel is significantly higher than in preserve peach pulps, while the syrup had only small or trace amounts of these compounds. Fresh peach pulps and Peel demonstrated high antioxidant and anti-inflammatory effects preventing against induced damage. PMID:25320458

Activated carbon from peach stones using phosphoric acid activation at medium temperatures.

Science.gov (United States)

Kim, Dong-Su

2004-01-01

In the present study, the activation features of phosphoric acid have been investigated using waste peach stones as the raw material in the production of granular activated carbon. Thermogravimetry/differential thermal analysis was conducted to characterize the thermal behavior of peach stone and titration method was used to evaluate the adsorption capacity of the produced activated carbon. It was observed that the iodine value of the activated carbon increased with activation temperature. However, temperatures higher than 500 degrees C caused a thermal destruction, which resulted in the decrease of the adsorption capacity. Activation longer than 1.5 h at 500 degrees C resulted in thermal degradation of the porous structure of the activated carbon. The adsorption capacity was enhanced with increasing of amounts of phosphoric acid, however, excessive phosphoric acid caused a decrease in the iodine value. In addition, it was found that the carbon yields generally decreased with activation temperature and activation time. Scanning electron microscopy analysis was conducted to observe the changes in the poros structure of the activated carbon produced in different temperatures. Activation of carbon by phosphoric acid was found to be superior to that by CaCl2 and gas activation. The activated carbon produced from peach stone was applied as an adsorbent in the treatment of synthesized wastewater containing cadmium ion and its adsorption capacity was found to be as good as that of the commercial one.

R and D on thermal hydraulics of core and core-bottom structure

International Nuclear Information System (INIS)

Inagaki, Yoshiyuki; Hino, Ryutaro; Kunitomi, Kazuhiko; Takase, Kazuyuki; Ioka, Ikuo; Maruyama, So

2004-01-01

Thermal hydraulic tests on the core and core-bottom structure of the high-temperature engineering test reactor (HTTR) were carried out with the helium engineering demonstration loop (HENDEL) under simulated reactor operating conditions. The HENDEL was composed of helium gas circulation loops, mother sections (M 1 and M 2 ) and adaptor section (A), and two test sections, i.e. the fuel stack test section (T 1 ) and in-core structure test section (T 2 ). In the T 1 test section simulating a fuel stack of the core, thermal and hydraulic performances of helium gas flowing through a fuel block were investigated for thermal design of the HTTR core. In the T 2 test section simulating the core-bottom structure, demonstration tests were performed to verify the structural integrity of graphite and metal components, seal performance against helium gas leakage among the graphite permanent blocks and thermal mixing performance of helium gas. The above test results in the T 1 and T 2 test sections were applied to the detailed design and licensing works of the HTTR and the HENDEL-loop was dismantled in 1999

Steam generator materials performance in high temperature gas-cooled reactors

International Nuclear Information System (INIS)

Chafey, J.E.; Roberts, D.I.

1980-11-01

This paper reviews the materials technology aspects of steam generators for HTGRs which feature a graphite-moderated, uranium-thorium, all-ceramic core and utilizes high-pressure helium as the primary coolant. The steam generators are exposed to gas-side temperatures approaching 760 0 C and produce superheated steam at 538 0 C and 16.5 MPa (2400 psi). The prototype Peach Bottom I 40-MW(e) HTGR was operated for 1349 EFPD over 7 years. Examination after decommissioning of the U-tube steam generators and other components showed the steam generators to be in very satisfactory condition. The 330-MW(e) Fort St. Vrain HTGR, now in the final stages of startup, has achieved 70% power and generated more than 1.5 x 10 6 MWh of electricity. The steam generators in this reactor are once-through units of helical configuration, requiring a number of new materials factors including creep-fatigue and water chemistry control. Current designs of larger HTGRs also feature steam generators of helical once-through design. Materials issues that are important in these designs include detailed consideration of time-dependent behavior of both base metals and welds, as required by current American Society of Mechanical Engineers (ASME) Code rules, evaluation of bimetallic weld behavior, evaluation of the properties of large forgings, etc

The crucial role of PpMYB10.1 in anthocyanin accumulation in peach and relationships between its allelic type and skin color phenotype.

Science.gov (United States)

Tuan, Pham Anh; Bai, Songling; Yaegaki, Hideaki; Tamura, Takayuki; Hihara, Seisuke; Moriguchi, Takaya; Oda, Kenji

2015-11-18

Red coloration of fruit skin is one of the most important traits in peach (Prunus persica), and it is mainly due to the accumulation of anthocyanins. Three MYB10 genes, PpMYB10.1, PpMYB10.2, and PpMYB10.3, have been reported as important regulators of red coloration and anthocyanin biosynthesis in peach fruit. In this study, contribution of PpMYB10.1/2/3 to anthocyanin accumulation in the fruit skin was investigated in the Japanese peach cultivars, white-skinned 'Mochizuki' and red-skinned 'Akatsuki'. We then investigated the relationships between allelic type of PpMYB10.1 and skin color phenotype in 23 Japanese peach cultivars for future establishment of DNA-marker. During the fruit development of 'Mochizuki' and 'Akatsuki', anthocyanin accumulation was observed only in the skin of red 'Akatsuki' fruit in the late ripening stages concomitant with high mRNA levels of the last step gene leading to anthocyanin accumulation, UDP-glucose:flavonoid-3-O-glucosyltransferase (UFGT). This was also correlated with the expression level of PpMYB10.1. Unlike PpMYB10.1, expression levels of PpMYB10.2/3 were low in the skin of both 'Mochizuki' and 'Akatsuki' throughout fruit development. Moreover, only PpMYB10.1 revealed expression levels associated with total anthocyanin accumulation in the leaves and flowers of 'Mochizuki' and 'Akatsuki'. Introduction of PpMYB10.1 into tobacco increased the expression of tobacco UFGT, resulting in higher anthocyanin accumulation and deeper red transgenic tobacco flowers; however, overexpression of PpMYB10.2/3 did not alter anthocyanin content and color of transgenic tobacco flowers when compared with wild-type flowers. Dual-luciferase assay showed that the co-infiltration of PpMYB10.1 with PpbHLH3 significantly increased the activity of PpUFGT promoter. We also found close relationships of two PpMYB10.1 allelic types, MYB10.1-1/MYB10.1-2, with the intensity of red skin coloration. We showed that PpMYB10.1 is a major regulator of anthocyanin

Genome-wide analysis of the homeodomain-leucine zipper (HD-ZIP) gene family in peach (Prunus persica).

Science.gov (United States)

Zhang, C H; Ma, R J; Shen, Z J; Sun, X; Korir, N K; Yu, M L

2014-04-08

In this study, 33 homeodomain-leucine zipper (HD-ZIP) genes were identified in peach using the HD-ZIP amino acid sequences of Arabidopsis thaliana as a probe. Based on the phylogenetic analysis and the individual gene or protein characteristics, the HD-ZIP gene family in peach can be classified into 4 subfamilies, HD-ZIP I, II, III, and IV, containing 14, 7, 4, and 8 members, respectively. The most closely related peach HD-ZIP members within the same subfamilies shared very similar gene structure in terms of either intron/exon numbers or lengths. Almost all members of the same subfamily shared common motif compositions, thereby implying that the HD-ZIP proteins within the same subfamily may have functional similarity. The 33 peach HD-ZIP genes were distributed across scaffolds 1 to 7. Although the primary structure varied among HD-ZIP family proteins, their tertiary structures were similar. The results from this study will be useful in selecting candidate genes from specific subfamilies for functional analysis.

[Evaluation of consumer's acceptance of a peach palm snack (Bactris gasipaes) and determination of its potential as a functional food].

Science.gov (United States)

López-Calvo, Rebeca; Pérez, Ana M; Ivankovich Guillén, Carmen; Calderón Villaplana, Sandra; Pineda Castro, Maria Lourdes

2015-03-01

The aim of this study was to evaluate consumers' acceptance of a peach palm snack and to determine its potential as a functional food by chemical characterization. An assessment was conducted with 100 consumers to determine the acceptance of different snack formulations and the results were subjected to cluster analysis. This analysis revealed two groups. Group 2 included people that consume snacks and peach palm frequently and showed the highest grades for the snack evaluated characteristics. All the consumers in group 2 and approximately 85% of the consumers in group 1 indicated that they would buy the product suggesting that there is a niche market for the developed peach palm snack. Also, a qualitative evaluation, using mini focus groups, of the two most widely accepted formulas of the snack (chosen according to previously described study) was performed. The sessions considered the opinion of middle class professionals and housewives. It was determined that the combination of tara gum and carboxymethylcellulose (CMC) allows a positive synergistic effect on the sensory characteristics of the snack, highlighting natural peach flavor and improving crunchiness. In a dry basis, the snack contains per 100 g: 9 ± 4 g of fat, 14.0 ± 0.3 g of dietary fiber, 15500 ± 32 µg of carotenoids and has an antioxidant capacity of 4700 ± 8 µmol TE, which demonstrates its potential as a functional food.

Fate of Escherichia coli O157:H7, Salmonella and Listeria innocua on minimally-processed peaches under different storage conditions.

Science.gov (United States)

Alegre, Isabel; Abadias, Maribel; Anguera, Marina; Usall, Josep; Viñas, Inmaculada

2010-10-01

Consumption of fresh-cut produce has sharply increased recently causing an increase of foodborne illnesses associated with these products. As generally, acidic fruits are considered 'safe' from a microbiological point of view, the aim of this work was to study the growth and survival of Escherichia coli O157:H7, Salmonella and Listeria innocua on minimally-processed peaches. The three foodborne pathogens population increased more than 2 log(10)units on fresh-cut peach when stored at 20 and 25 degrees C after 48 h. At 10 degrees C only L. innocua grew more than 1 log(10)unit and it was the only pathogen able to grow at 5 degrees C. Differences in growth occurred between different peach varieties tested, with higher population increases in those varieties with higher pH ('Royal Glory' 4.73+/-0.25 and 'Diana' 4.12+/-0.18). The use of common strategies on extending shelf life of fresh-cut produce, as modified atmosphere packaging and the use of the antioxidant substance, ascorbic acid (2%w/v), did not affect pathogens' growth at any of the temperatures tested (5 and 25 degrees C). Minimally-processed peaches have shown to be a good substrate for foodborne pathogens' growth regardless use of modified atmosphere and ascorbic acid. Therefore, maintaining cold chain and avoiding contamination is highly necessary. 2010 Elsevier Ltd. All rights reserved.

Reactor BR2

Energy Technology Data Exchange (ETDEWEB)

Gubel, P

2000-07-01

The BR2 reactor is still SCK-CEN's most important nuclear facility. After an extensive refurbishment to compensate for the ageing of the installation, the reactor was restarted in April 1997. Various aspects concerning the operation of the BR2 Reactor, the utilisation of the CALLISTO loop and the irradiation programme, the BR2 R and D programme and the production of isotopes and of NTD-silicon are discussed. Progress and achievements in 1999 are reported.

Reactor BR2

International Nuclear Information System (INIS)

Gubel, P.

2000-01-01

The BR2 reactor is still SCK-CEN's most important nuclear facility. After an extensive refurbishment to compensate for the ageing of the installation, the reactor was restarted in April 1997. Various aspects concerning the operation of the BR2 Reactor, the utilisation of the CALLISTO loop and the irradiation programme, the BR2 R and D programme and the production of isotopes and of NTD-silicon are discussed. Progress and achievements in 1999 are reported

Liquid chromatography/mass spectrometry investigation of the impact of thermal processing and storage on peach procyanidins.

Science.gov (United States)

Hong, Yun-Jeong; Barrett, Diane M; Mitchell, Alyson E

2004-04-21

Normal-phase liquid chromatography/mass spectrometry (LC/MS) was used to determine the levels and fate of procyanidins in frozen and canned Ross clingstone peaches as well as in the syrup used in the canning over a 3 month period. Procyanidin oligomers, monomers through undecamers, were identified in Ross clingstone peaches. Optimized methods allowed for the quantitation of oligomers through octamers. The profile of procyanidins in peaches is similar to profiles found in grapes, chocolate, and beverages linked to health benefits such as tea and wine. The monomer content in frozen peeled peaches was found to be 19.59 mg/kg. Dimers (39.59 mg/kg) and trimers (38.81 mg/kg) constituted the largest percent composition of oligomers in the peaches. Tetramers through octamers were present in levels of 17.81, 12.43, 10.62, 3.94 and 1.75 mg/kg, respectively. Thermal processing resulted in an 11% reduction in monomers, a 9% reduction in dimers, a 12% reduction in trimers, a 6% reduction in tetramers, and a 5% reduction in pentamers. Hexamers and heptamers demonstrated an approximate 30% loss, and octamers were no longer detected. Analysis of the syrup after thermal processing indicates that there is a migration of procyanidin monomers through hexamers into the syrup that can account for the losses observed during the canning process. Storage of canned peaches for 3 months demonstrated a time-related loss in higher oligomers and that by 3 months oligomers larger than tetramers are not observed. At 3 months postcanning, levels of monomers had decreased by 10%, dimers by 16%, trimers by 45%, and tetramers by 80%. A similar trend was observed in the canning syrup.

Reduction in size of bottom-mounted reactivity control mechanism of research reactor for seismic qualification test

Energy Technology Data Exchange (ETDEWEB)

Sun, Jongoh; Kim, Gyeongho; Yoo, Yeonsik; Cho, Yeonggarp; Kim, Jongin [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2013-07-01

A new research reactor employing bottom-mounted reactivity control mechanism (RCM) is under development and its safety function which is a shutdown of the reactor under earthquake events should be verified through a test. However, the real system is too heavy to be excited artificially, and hence the size of a test rig should be reduced somehow. As a preliminary study for development of a seismic test rig, this paper presents how to reduce the length of an extension shaft which is a main component of RCM while it maintains dynamic characteristics of the real system. In this paper, instead of reduction in length of the shaft, the inner/outer radius of the shaft and water gap size between the shaft and its guide tube will be modified in order to match its natural frequency and displacement due to seismic excitation to those of the real system. Furthermore, a proper mass which does not increase the stiffness will be inserted into the hollow shaft. Then, dynamic equation was derived for the beam model and an optimization problem was defined and solved. The result shows that the design modification is reasonable for description of dynamic characteristics of the real system under earthquake events.

Reduction in size of bottom-mounted reactivity control mechanism of research reactor for seismic qualification test

International Nuclear Information System (INIS)

Sun, Jongoh; Kim, Gyeongho; Yoo, Yeonsik; Cho, Yeonggarp; Kim, Jongin

2013-01-01

A new research reactor employing bottom-mounted reactivity control mechanism (RCM) is under development and its safety function which is a shutdown of the reactor under earthquake events should be verified through a test. However, the real system is too heavy to be excited artificially, and hence the size of a test rig should be reduced somehow. As a preliminary study for development of a seismic test rig, this paper presents how to reduce the length of an extension shaft which is a main component of RCM while it maintains dynamic characteristics of the real system. In this paper, instead of reduction in length of the shaft, the inner/outer radius of the shaft and water gap size between the shaft and its guide tube will be modified in order to match its natural frequency and displacement due to seismic excitation to those of the real system. Furthermore, a proper mass which does not increase the stiffness will be inserted into the hollow shaft. Then, dynamic equation was derived for the beam model and an optimization problem was defined and solved. The result shows that the design modification is reasonable for description of dynamic characteristics of the real system under earthquake events

Ecological adaptation of wild peach palm, its in situ conservation and deforestation-mediated extinction in southern Brazilian Amazonia.

Science.gov (United States)

Clement, Charles R; Santos, Ronaldo P; Desmouliere, Sylvain J M; Ferreira, Evandro J L; Neto, João Tomé Farias

2009-01-01

The Arc of Fire across southern Amazonia seasonally attracts worldwide attention as forests are cut and burned for agricultural expansion. These forests contain numerous wild relatives of native South American crops, such as peach palm. Our prospecting expeditions examined critical areas for wild peach palm in the Arc of Fire in Mato Grosso, Pará, Maranhão and Tocantins, as well as areas not previously examined in Amazonas and Amapá states. Recent digitization of the RADAM Brasil project permitted comparison among RADAM's parataxonomists' observations, previous botanical collections and our prospecting. Mapping on soils and vegetation types enabled us to hypothesize a set of ecological preferences. Wild peach palm is best adapted to Ultisols (Acrisols) in open forests across the Arc of Fire and westward into the more humid western Amazonia. Populations are generally small (fewer than 10 plants) on slopes above watercourses. In northern Mato Grosso and southern Pará soybean fields and pastures now occupy numerous areas where RADAM identified wild peach palm. The controversial BR-163 Highway is already eroding wild peach palm as deforestation expands. Many of these populations are now isolated by increasing forest fragmentation, which will lead to decreased reproduction via inbreeding depression and eventual extinction even without complete deforestation. Federal conservation areas are less numerous in the Arc of Fire than in other parts of Brazilian Amazonia, although there are indigenous lands; these conservation areas contain viable populations of wild peach palm and require better protection than they are currently receiving. Ex situ conservation of these populations is not viable given the relative lack of importance of domesticated peach palm and the difficulty of maintaining even economically interesting genetic resources.

Simulation tests for temperature mixing in a core bottom model of the HTR-module

International Nuclear Information System (INIS)

Damm, G.; Wehrlein, R.

1992-01-01

Interatom and Siemens are developing a helium-cooled Modular High Temperature Reactor. Under nominal operating conditions temperature differences of up to 120deg C will occur in the 700deg C hot helium flow leaving the core. In addition, cold gas leakages into the hot gas header can produce even higher temperature differences in the coolant flow. At the outlet of the reactor only a very low temperature difference of maximum ± 15deg C is allowed in order to avoid damages at the heat exchanging components due to alternating thermal loads. Since it is not possible to calculate the complex flow behaviour, experimental investigations of the temperature mixing in the core bottom had to be carried out in order to guarantee the necessary reduction of temperature differences in the helium. The presented air simulation tests in a 1:2.9 scaled plexiglas model of the core bottom showed an extremely high mixing rate of the hot gas header and the hot gas duct of the reactor. The temperature mixing of the simulated coolant flow as well as the leakage flows was larger than 95%. Transfered to reactor conditions this means a temperature difference of only ± 3deg C for the main flow at a quite resonable pressure drop. For the cold gas leakages temperature differences in the hot gas up to 400deg C proved to be permissible. The results of the simulation experiments in the Aerodynamic Test Facility of Interatom permitted to design a shorter bottom reflector of the core. (orig.)

Supercritical fluid extraction of peach (Prunus persica) almond oil: process yield and extract composition.

Science.gov (United States)

Mezzomo, Natália; Mileo, Bruna R; Friedrich, Maria T; Martínez, Julian; Ferreira, Sandra R S

2010-07-01

Peach kernels are industrial residues from the peach processing, contain oil with important therapeutic properties and attractive nutritional aspects because of the high concentration of oleic and linoleic acids. The extraction method used to obtain natural compounds from raw matter is critical for product quality definition. Thus, the aim of this work was to compare peach almond extraction yields obtained by different procedures: soxhlet extractions (Sox) with different solvents; hydrodistillation (HD); ethanolic maceration (Mac) followed by fractionation with various solvents, and supercritical fluid extraction (SFE) at 30, 40 and 50 degrees C and at 100, 200 and 300bar, performed with pure CO(2) and with a co-solvent. The extracts were evaluated with respect to fatty acid composition (FAC), fractionated chemical profile (FCP) and total phenolic content (TPC). The Sox total yields were generally higher than those obtained by SFE. The crossover pressure for SFE was between 260 and 280bar. The FAC results show oleic and linoleic acids as main components, especially for Sox and SFE extracts. The FCP for samples obtained by Sox and Mac indicated the presence of benzaldehyde and benzyl alcohol, components responsible for almond flavor and with important industrial uses, whereas the SFE extracts present a high content of a possible flavonoid. The higher TPC values were obtained by Sox and Mac with ethanol. In general, the maximum pressure in SFE produced the highest yield, TPC and oleic acid content. The use of ethanol at 5% as co-solvent in SFE did not result in a significant effect on any evaluated parameter. The production of peach almond oil through all techniques is substantially adequate and SFE presented advantages, with respect to the quality of the extracts due to the high oleic acid content, as presented by some Sox samples. Copyright (c) 2010 Elsevier Ltd. All rights reserved.

Nuclear reactor core safety device

International Nuclear Information System (INIS)

Colgate, S.A.

1977-01-01

The danger of a steam explosion from a nuclear reactor core melt-down can be greatly reduced by adding a gasifying agent to the fuel that releases a large amount of gas at a predetermined pre-melt-down temperature that ruptures the bottom end of the fuel rod and blows the finely divided fuel into a residual coolant bath at the bottom of the reactor. This residual bath should be equipped with a secondary cooling loop

Stress analyses for reactor pressure vessels by the example of a product line '69 boiling water reactor

International Nuclear Information System (INIS)

Mkrtchyan, Lilit; Schau, Henry; Wolf, Werner; Holzer, Wieland; Wernicke, Robert; Trieglaff, Ralf

2011-01-01

The reactor pressure vessels (RPV) of boiling water reactors (BWR) belonging to the product line '69 have unusually designed heads. The spherical cap-shaped bottom head of the vessel is welded directly to the support flange of the lower shell course. This unusual construction has led repeatedly to controversial discussions concerning the limits and admissibility of stress intensities arising in the junction of the bottom head to the cylindrical shell. In the present paper, stress analyses for the design conditions are performed with the finite element method in order to determine and categorize the occurring stresses. The procedure of stress classification in accordance with the guidelines of German KTA 3201.2 and Section III of the ASME Code (Subsection NB) is described and subsequently demonstrated by the example of a typical BWR vessel. The accomplished investigations yield allowable stress intensities in the considered area. Additionally, limit load analyses are carried out to verify the obtained results. Complementary studies, performed for a torispherical head, prove that the determined maximum peak stresses in the junction between the bottom head and the cylindrical shell are not unusual also for pressure vessels with regular bottom head constructions. (orig.)

Apple and peach consumption habits across European countries

NARCIS (Netherlands)

Konopacka, D.; Jesionkowska, K.; Kruczynska, D.; Schoorl, F.W.

2010-01-01

The aim of this study was to gain information concerning apple and peach consumption frequency within different European countries in relation to age and gender. The survey was a part of a complex experiment with the aim of evaluating consumers’ preferences towards new varieties, and the data is

Refinement of the bottom boundary of the INES scale

International Nuclear Information System (INIS)

Ferjencik, Milos

2010-01-01

No existing edition of the International Nuclear Events Scale (INES) Manual addresses in depth the determination of the bottom boundary of the Scale, although a need for a definition is felt. The article introduces a method for determining the INES bottom boundary applicable to pressurized water reactors. This bottom boundary is put identical with the threshold of degradation of the installation's nuclear safety assurance. A comprehensive flowchart has been developed as the main outcome of the analysis of the nuclear safety assurance violation issue. The use of this flowchart in INES classification to replace the introductory question in the General INES Rating Procedure in the INES Manual is recommended. (orig.)

Performance and characteristics of carcass and non-carcass components of lambs fed peach-palm by-product.

Science.gov (United States)

dos Santos Cabral, Ícaro; Azevêdo, José Augusto Gomes; de Almeida, Flávio Moreira; Pereira, Luiz Gustavo Ribeiro; de Araújo, Gherman Garcia Leal; dos Santos Cruz, Cristiane Leal; Nogueira, Abdon Santos; Souza, Lígia Lins; de Oliveira, Gisele Andrade

2013-11-01

The objective of this study was to evaluate the effects of supplying the by-product of peach-palm (Bactris gasipaes) on performance and characteristics of carcass and non-carcass components of feedlot lambs. Twenty Santa Ines lambs of 150 days average age and 22.4 ± 3.4 kg body weight were confined in individual pens. A completely randomized design was utilized with four experimental diets composed of: fresh peach-palm by-product enriched with urea, fresh peach-palm by-product + concentrate, silage of peach-palm by-product + concentrate, and silage of peach-palm by-product enriched with 15 % corn meal + concentrate. Intake was evaluated daily, and at the end of 42 days of experiments, lambs were slaughtered and the characteristics of carcass and non-carcass parts were evaluated. Performance and carcass characteristics showed differences between the animals' intake of total mixed rations (TMR) and only the diet with roughage. For the lambs that intaked TMR, the form of utilization of roughage (fresh or as silage) affected animal performance but did not change the carcass characteristics. Dry matter intake and feed conversion were influenced by the form of utilization of the silage (with and without additive). Providing fresh by-product plus concentrate improves lamb performance but does not interfere in the carcass characteristics, compared with the use of by-product in the form of silage.

De novo transcriptome assembly of two different peach cultivars grown in Korea

Directory of Open Access Journals (Sweden)

Yeonhwa Jo

2015-12-01

Full Text Available Peach (Prunus persica is one of the most popular stone fruits worldwide. Next generation sequencing (NGS has facilitated genome and transcriptome analyses of several stone fruit trees. In this study, we conducted de novo transcriptome analyses of two peach cultivars grown in Korea. Leaves of two cultivars, referred to as Jangtaek and Mibaek, were harvested and used for library preparation. The two prepared libraries were paired-end sequenced by the HiSeq2000 system. We obtained 8.14 GB and 9.62 GB sequence data from Jangtaek and Mibaek (NCBI accession numbers: SRS1056585 and SRS1056587, respectively. The Trinity program was used to assemble two transcriptomes de novo, resulting in 110,477 (Jangtaek and 136,196 (Mibaek transcripts. TransDecoder identified possible coding regions in assembled transcripts. The identified proteins were subjected to BLASTP search against NCBI's non-redundant database for functional annotation. This study provides transcriptome data for two peach cultivars, which might be useful for genetic marker development and comparative transcriptome analyses.

Investigation of the aroma of commercial peach (Prunus persica L. Batsch) types by Proton Transfer Reaction-Mass Spectrometry (PTR-MS) and sensory analysis.

Science.gov (United States)

Bianchi, Tiago; Weesepoel, Yannick; Koot, Alex; Iglesias, Ignasi; Eduardo, Iban; Gratacós-Cubarsí, Marta; Guerrero, Luis; Hortós, Maria; van Ruth, Saskia

2017-09-01

The aim of this study was to investigate the aroma and sensory profiles of various types of peaches (Prunus persica L. Batsch.). Forty-three commercial cultivars comprising peaches, flat peaches, nectarines, and canning peaches (pavías) were grown over two consecutive harvest years. Fruits were assessed for chemical aroma and sensory profiles. Chemical aroma profile was obtained by proton transfer reaction-mass spectrometry (PTR-MS) and spectral masses were tentatively identified with PTR-Time of Flight-MS (PTR-Tof-MS). Sensory analysis was performed at commercial maturity considering seven aroma/flavor attributes. The four types of peaches showed both distinct chemical aroma and sensory profiles. Flat peaches and canning peaches showed most distinct patterns according to discriminant analysis. The sensory data were related to the volatile compounds by partial least square regression. γ-Hexalactone, γ-octalactone, hotrienol, acetic acid and ethyl acetate correlated positively, and benzeneacetaldehyde, trimethylbenzene and acetaldehyde negatively to the intensities of aroma and ripe fruit sensory scores. Copyright © 2017 Elsevier Ltd. All rights reserved.

Definition of Linear Color Models in the RGB Vector Color Space to Detect Red Peaches in Orchard Images Taken under Natural Illumination

Directory of Open Access Journals (Sweden)

Jordi Palacín

2012-06-01

Full Text Available This work proposes the detection of red peaches in orchard images based on the definition of different linear color models in the RGB vector color space. The classification and segmentation of the pixels of the image is then performed by comparing the color distance from each pixel to the different previously defined linear color models. The methodology proposed has been tested with images obtained in a real orchard under natural light. The peach variety in the orchard was the paraguayo (Prunus persica var. platycarpa peach with red skin. The segmentation results showed that the area of the red peaches in the images was detected with an average error of 11.6%; 19.7% in the case of bright illumination; 8.2% in the case of low illumination; 8.6% for occlusion up to 33%; 12.2% in the case of occlusion between 34 and 66%; and 23% for occlusion above 66%. Finally, a methodology was proposed to estimate the diameter of the fruits based on an ellipsoidal fitting. A first diameter was obtained by using all the contour pixels and a second diameter was obtained by rejecting some pixels of the contour. This approach enables a rough estimate of the fruit occlusion percentage range by comparing the two diameter estimates.

Corrosion problem in the CRENK Triga Mark II research reactor

International Nuclear Information System (INIS)

Kalenga, M.

1990-01-01

In August 1987, a routine underwater optical inspection of the aluminum tank housing the core of the CRENK Triga Mark II reactor, carried out to update safety condition of the reactor, revealed pitting corrosion attacks on the 8 mm thick aluminum tank bottom. The paper discuss the work carried out by the reactor staff to dismantle the reactor in order to allow a more precise investigation of the corrosion problem, to repair the aluminum tank bottom, and to enhance the reactor overall safety condition

Ecological adaptation of wild peach palm, its in situ conservation and deforestation-mediated extinction in southern Brazilian Amazonia.

Directory of Open Access Journals (Sweden)

Charles R Clement

Full Text Available BACKGROUND: The Arc of Fire across southern Amazonia seasonally attracts worldwide attention as forests are cut and burned for agricultural expansion. These forests contain numerous wild relatives of native South American crops, such as peach palm. METHODOLOGY/PRINCIPAL FINDINGS: Our prospecting expeditions examined critical areas for wild peach palm in the Arc of Fire in Mato Grosso, Pará, Maranhão and Tocantins, as well as areas not previously examined in Amazonas and Amapá states. Recent digitization of the RADAM Brasil project permitted comparison among RADAM's parataxonomists' observations, previous botanical collections and our prospecting. Mapping on soils and vegetation types enabled us to hypothesize a set of ecological preferences. Wild peach palm is best adapted to Ultisols (Acrisols in open forests across the Arc of Fire and westward into the more humid western Amazonia. Populations are generally small (fewer than 10 plants on slopes above watercourses. In northern Mato Grosso and southern Pará soybean fields and pastures now occupy numerous areas where RADAM identified wild peach palm. The controversial BR-163 Highway is already eroding wild peach palm as deforestation expands. CONCLUSIONS/SIGNIFICANCE: Many of these populations are now isolated by increasing forest fragmentation, which will lead to decreased reproduction via inbreeding depression and eventual extinction even without complete deforestation. Federal conservation areas are less numerous in the Arc of Fire than in other parts of Brazilian Amazonia, although there are indigenous lands; these conservation areas contain viable populations of wild peach palm and require better protection than they are currently receiving. Ex situ conservation of these populations is not viable given the relative lack of importance of domesticated peach palm and the difficulty of maintaining even economically interesting genetic resources.

Genome-wide identification of WRKY family genes in peach and analysis of WRKY expression during bud dormancy.

Science.gov (United States)

Chen, Min; Tan, Qiuping; Sun, Mingyue; Li, Dongmei; Fu, Xiling; Chen, Xiude; Xiao, Wei; Li, Ling; Gao, Dongsheng

2016-06-01

Bud dormancy in deciduous fruit trees is an important adaptive mechanism for their survival in cold climates. The WRKY genes participate in several developmental and physiological processes, including dormancy. However, the dormancy mechanisms of WRKY genes have not been studied in detail. We conducted a genome-wide analysis and identified 58 WRKY genes in peach. These putative genes were located on all eight chromosomes. In bioinformatics analyses, we compared the sequences of WRKY genes from peach, rice, and Arabidopsis. In a cluster analysis, the gene sequences formed three groups, of which group II was further divided into five subgroups. Gene structure was highly conserved within each group, especially in groups IId and III. Gene expression analyses by qRT-PCR showed that WRKY genes showed different expression patterns in peach buds during dormancy. The mean expression levels of six WRKY genes (Prupe.6G286000, Prupe.1G393000, Prupe.1G114800, Prupe.1G071400, Prupe.2G185100, and Prupe.2G307400) increased during endodormancy and decreased during ecodormancy, indicating that these six WRKY genes may play a role in dormancy in a perennial fruit tree. This information will be useful for selecting fruit trees with desirable dormancy characteristics or for manipulating dormancy in genetic engineering programs.

Cryopreservation of peach palm zygotic embryos.

Science.gov (United States)

Steinmacher, Douglas A; Saldanha, Cleber W; Clement, Charles R; Guerra, Miguel P

2007-01-01

Cryopreservation is a safe and cost-effective option for long-term germplasm conservation of non-orthodox seed species, such as peach palm (Bactris gasipaes). The objective of the present study was to establish a cryopreservation protocol for peach palm zygotic embryos based on the encapsulation-dehydration technique. After excision, zygotic embryos were encapsulated with 3 percent sodium alginate plus 2 M glycerol and 0.4 M sucrose, and pre-treated or not with 1 M sucrose during 24 h, followed by air-drying. Fresh weight water contents of beads decreased from 83 percent and 87 percent to 18 percent and 20 percent for pre-treated or non-pretreated beads, respectively, after 4 h of dehydration. Sucrose pre-treatment at 1 M caused lower zygotic embryo germination and plantlet height in contrast to non-treated beads. All the variables were statistically influenced by dehydration time. Optimal conditions for recovery of cryopreserved zygotic embryos include encapsulation and dehydration for 4 h in a forced air cabinet to 20 percent water content, followed by rapid freezing in liquid nitrogen (-196 degree C) and rapid thawing at 45 degree C. In these conditions 29 percent of the zygotic embryos germinated in vitro. However, plantlets obtained from dehydrated zygotic embryos had stunted haustoria and lower heights. Histological analysis showed that haustorium cells were large, vacuolated, with few protein bodies. In contrast, small cells with high nucleus:cytoplasm ratio formed the shoot apical meristem of the embryos, which were the cell types with favorable characteristics for survival after exposure to liquid nitrogen. Plantlets were successfully acclimatized and showed 41+/-9 percent and 88+/-4 percent survival levels after 12 weeks of acclimatization from cryopreserved and non-cryopreserved treatments, respectively.

Stress analyses for reactor pressure vessels by the example of a product line '69 boiling water reactor

Energy Technology Data Exchange (ETDEWEB)

Mkrtchyan, Lilit; Schau, Henry [TUEV SUED Energietechnik GmbH, Mannheim (Germany). Abt. Strukturverhalten; Wolf, Werner; Holzer, Wieland [TUEV SUED Industrie Service GmbH, Muenchen (Germany). Abt. Behaelter und Turbosatz; Wernicke, Robert; Trieglaff, Ralf [TUEV NORD SysTec GmbH und Co. KG, Hamburg (Germany). Abt. Festigkeit und Konstruktion

2011-08-15

The reactor pressure vessels (RPV) of boiling water reactors (BWR) belonging to the product line '69 have unusually designed heads. The spherical cap-shaped bottom head of the vessel is welded directly to the support flange of the lower shell course. This unusual construction has led repeatedly to controversial discussions concerning the limits and admissibility of stress intensities arising in the junction of the bottom head to the cylindrical shell. In the present paper, stress analyses for the design conditions are performed with the finite element method in order to determine and categorize the occurring stresses. The procedure of stress classification in accordance with the guidelines of German KTA 3201.2 and Section III of the ASME Code (Subsection NB) is described and subsequently demonstrated by the example of a typical BWR vessel. The accomplished investigations yield allowable stress intensities in the considered area. Additionally, limit load analyses are carried out to verify the obtained results. Complementary studies, performed for a torispherical head, prove that the determined maximum peak stresses in the junction between the bottom head and the cylindrical shell are not unusual also for pressure vessels with regular bottom head constructions. (orig.)

Effect of Water Deficit Stress on Peach Growth under Commercial Orchard Management Conditions

Directory of Open Access Journals (Sweden)

M. Rahmati

2015-06-01

Full Text Available In order to study the sensitivity of vegetative growth to water deficit stress of a late-maturing peach (Prunus persica L. cv. Elberta under orchard conditions, an experiment was conducted as randomized complete-block design with three treatments and four repetitions in Shahdiran commercial orchard in Mashhad during 2011. Three irrigation treatments including 360 (low stress, 180 (moderate stress and 90 (severe stress m3ha-1week-1 using a drip irrigation system (minimum stem water potential near harvest: -1.2, -1.5 and -1.7 MPa, respectively from the mid-pit hardening stage (12th of June until harvest (23rd of Sep. applied. Predawn, stem and leaf water potentials, leaf photosynthesis, transpiration, stomatal conductance and leaf temperature, the number of new shoots on fruit bearing shoots and vegetative shoots lengths during growing season as well as leaf area at harvest were measured. The results showed that water deficit stress had negative effects on peach tree water status, thereby resulting in decreased leaf gas exchange and tree vegetative growth. As significant decreased assimilate production of tree was resulted from both decreased leaf assimilation rate (until about 23 % and 50 %, respectively under moderate and severe stress conditions compared to low stress conditions and decreased leaf area of tree (until about 57% and 79%, respectively under moderate and severe stress conditions compared to low stress conditions at harvest. The significant positive correlation between leaf water potential and vegetative growth of peach revealed that shoot growth would decrease by 30% and 50% of maximum at leaf water potential of –1.56 and –2.30 MPa, respectively.

Characterization of Amazon fibers of the peach palm, balsa, and babassu by XDR, TGA and NMR

International Nuclear Information System (INIS)

Martins, Maria A.; Marconcini, Jose M.; Morelli, Carolina L.; Marinelli, Alessandra L.; Bretas, Rosario E.S.

2011-01-01

The aim of this work was to present the results by testing X-ray diffraction (XRD), thermogravimetric analysis (TG), nuclear magnetic resonance (NMR) and determining the moisture content of the peach palm, balsa and babassu fibers for assessing the feasibility of composite materials. The fibers of peach palm, balsa and babassu showed characteristic chemical structure of lignocellulosic material, and good thermal stability up to 220 deg C. The fiber with the highest crystallinity index (Ic) is the peach palm (72%) and the less crystalline is the babassu (37%), while the balsa fibers have Ic equal to 64%. The results have shown that these fibers can be used in the manufacture of composite materials. (author)

A one-step multiplex RT-PCR assay for simultaneous detection of four viruses that infect peach.

Science.gov (United States)

Yu, Y; Zhao, Z; Jiang, D; Wu, Z; Li, S

2013-10-01

A multiplex reverse transcription polymerase chain reaction (mRT-PCR) assay was developed to enable the simultaneous detection and differentiation of four viruses that infect peach, namely Apple chlorotic leaf spot virus (ACLSV), Cherry green ring mottle virus (CGRMV), Prunus necrotic ringspot virus (PNRSV) and Apricot pseudo-chlorotic leaf spot virus (APCLSV). In this study, four pairs of primers, one specific for each virus, were designed; the corresponding PCR products were 632, 439, 346 and 282 bp in length for ACLSV, CGRMV, PNRSV and APCLSV, respectively, and the fragments could be distinguished clearly by agarose gel electrophoresis. The sensitivity and specificity of the method were tested using individual RT-PCR and enzyme-linked immunosorbent assay (ELISA), and the identity of the RT-PCR amplification products was also confirmed by DNA sequencing. The results of RT-PCR and ELISA, along with batch detection using samples collected from peach orchards, revealed that this rapid and simple technique is an effective way to identify the four viruses simultaneously. The mRT-PCR assay described in this study was developed for the simultaneous detection of four peach viruses from infected peach samples is reliable and sensitive. In contrast to conventional uniplex RT-PCR, mRT-PCR is more efficient, reducing costs, time and handling when testing large numbers of samples. This rapid and simple method is useful for large-scale surveys of viruses that infect peach. © 2013 The Society for Applied Microbiology.

Activity of pectin methyl esterase during blanching of peaches

NARCIS (Netherlands)

Tijskens, L.M.M.; Rodis, P.S.; Hertog, M.L.A.T.M.; Proxenia, N.; Dijk, van C.

1999-01-01

The activity of pectin methyl esterase (PE) in peaches during blanching treatments was modelled and analyzed. It was postulated that the enzyme exists in two configurations, one bound and one soluble. The bound configuration can be converted into the soluble configuration. These two configurations

Study on the seismic response of reactor vessel of pool type LMFBR including fluid-structure interaction

International Nuclear Information System (INIS)

Tanimoto, K.; Ito, T.; Fujita, K.; Kurihara, C.; Sawada, Y.; Sakurai, A.

1988-01-01

The paper presents the seismic response of reactor vessel of pool type LMFBR with fluid-structure interaction. The reactor vessel has bottom support arrangement, the same core support system as Super-Phenix in France. Due to the bottom support arrangement, the level of core support is lower than that of the side support arrangement. So, in this reactor vessel, the displacement of the core top tends to increase because of the core's rocking. In this study, we investigated the vibration and seismic response characteristics of the reactor vessel. Therefore, the seismic experiments were carried out using one-eighth scale model and the seismic response including FSI and sloshing were investigated. From this study, the effect of liquid on the vibration characteristics and the seismic response characteristics of reactor vessel were clarified and sloshing characteristics were also clarified. It was confirmed that FEM analysis with FSI can reproduce the seismic behavior of the reactor vessel and is applicable to seismic design of the pool type LMFBR with bottom support arrangement. (author). 5 refs, 14 figs, 2 tabs

Phytosanitary irradiation of peach fruit moth (Lepidoptera: Carposinidae) in apple fruits

International Nuclear Information System (INIS)

Zhan, Guoping; Li, Baishu; Gao, Meixu; Liu, Bo; Wang, Yuejin; Liu, Tao; Ren, Lili

2014-01-01

Peach fruit moth, Carposina sasakii Matsumura, is a serious pest of many pome and stone fruits and presents a quarantine problem in some export markets. It is widely distributed in pome fruit production areas in China, Japan, Korea, North Korea and the Far Eastern Federal District of Russia. In this investigation, gamma radiation dose–response tests were conducted with late eggs (5-d-old) and various larval stages, followed by large-scale confirmatory tests on the most tolerant stage in fruit, the fifth instar. The dose-response tests, with the target radiation dose of 20 (late eggs), 40, 60, 80, 100, 120, 140, and 160 Gy (late fifth instars in vitro) respectively applied to all stages, showed that the tolerance to radiation increased with increasing age and developmental stage. The fifth instar (most advanced instar in fruits) was determined to be the most tolerant stage requiring an estimated minimum absorbed dose of 208.6 Gy (95% CI: 195.0, 226.5 Gy) to prevent adult emergence at 99.9968% efficacy (95% confidence level). In the confirmatory tests, irradiation was applied to 30,850 late fifth instars in apple fruits with a target dose of 200 Gy (171.6–227.8 Gy measured), but only 4 deformed adults emerged that died 2 d afterwards without laying eggs. A dose of 228 Gy may be recommended as a phytosanitary irradiation treatment under ambient atmosphere for the control of peach fruit moth on all commodities with an efficacy of 99.9902% at 95% confidence level. - Highlights: • Dose–response tests were conducted on eggs and all larval stages. • Fifth instar is the most tolerant stage that could be shipped in fruits. • None normal-looking adult emerged from 30,850 fifth instars in confirmatory tests. • A minimum of 228 Gy is suggested for phytosanitary irradiation of peach fruit moth

HPLC-DAD-ESIMS analysis of phenolic compounds in nectarines, peaches, and plums.

Science.gov (United States)

Tomás-Barberán, F A; Gil, M I; Cremin, P; Waterhouse, A L; Hess-Pierce, B; Kader, A A

2001-10-01

The phenolic compounds of 25 peach, nectarine, and plum cultivars were studied and quantified by HPLC-DAD-ESIMS. Hydroxycinnamates, procyanidins, flavonols, and anthocyanins were detected and quantified. White and yellow flesh nectarines and peaches, and yellow and red plums, were analyzed at two different maturity stages with consideration of both peel and flesh tissues. HPLC-MS analyses allowed the identification of procyanidin dimers of the B- and A-types, as well as the presence of procyanidin trimers in plums. As a general rule, the peel tissues contained higher amounts of phenolics, and anthocyanins and flavonols were almost exclusively located in this tissue. No clear differences in the phenolic content of nectarines and peaches were detected or between white flesh and yellow flesh cultivars. There was no clear trend in phenolic content with ripening of the different cultivars. Some cultivars, however, had a very high phenolic content. For example, the white flesh nectarine cultivar Brite Pearl (350-460 mg/kg hydroxycinnamates and 430-550 mg/kg procyanidins in flesh) and the yellow flesh cv. Red Jim (180-190 mg/kg hydroxycinnamates and 210-330 mg/kg procyanidins in flesh), contained 10 times more phenolics than cultivars such as Fire Pearl (38-50 mg/kg hydroxycinnamates and 23-30 mg/kg procyanidins in flesh). Among white flesh peaches, cultivars Snow King (300-320 mg/kg hydroxycinnamates and 660-695 mg/kg procyanidins in flesh) and Snow Giant (125-130 mg/kg hydroxycinnamates and 520-540 mg/kg procyanidins in flesh) showed the highest content. The plum cultivars Black Beaut and Angeleno were especially rich in phenolics.

Characteristics of potential repository wastes. Volume 2

Energy Technology Data Exchange (ETDEWEB)

1992-07-01

The LWR spent fuels discussed in Volume 1 of this report comprise about 99% of all domestic non-reprocessed spent fuel. In this report we discuss other types of spent fuels which, although small in relative quantity, consist of a number of diverse types, sizes, and compositions. Many of these fuels are candidates for repository disposal. Some non-LWR spent fuels are currently reprocessed or are scheduled for reprocessing in DOE facilities at the Savannah River Site, Hanford Site, and the Idaho National Engineering Laboratory. It appears likely that the reprocessing of fuels that have been reprocessed in the past will continue and that the resulting high-level wastes will become part of defense HLW. However, it is not entirely clear in some cases whether a given fuel will be reprocessed, especially in cases where pretreatment may be needed before reprocessing, or where the enrichment is not high enough to make reprocessing attractive. Some fuels may be canistered, while others may require special means of disposal. The major categories covered in this chapter include HTGR spent fuel from the Fort St. Vrain and Peach Bottom-1 reactors, research and test reactor fuels, and miscellaneous fuels, and wastes generated from the decommissioning of facilities.

Characterising root density of peach trees in a semi-arid Chernozem to increase plant density

Science.gov (United States)

Paltineanu, Cristian; Septar, Leinar; Gavat, Corina; Chitu, Emil; Oprita, Alexandru; Moale, Cristina; Calciu, Irina; Vizitiu, Olga; Lamureanu, Gheorghe

2016-01-01

The available information on root system in fully mature peach orchards in semi-arid regions is insufficient. This paper presents a study on the root system density in an irrigated peach orchard from Dobrogea, Romania, using the trench technique. The old orchard has clean cultivation in inter-row and in-row. The objectives of the study were to: test the hypothesis that the roots of fully mature peach trees occupy the whole soil volume; find out if root repulsive effect of adjacent plants occurred for the rootstocks and soil conditions; find relationships between root system and soil properties and analyse soil state trend. Some soil physical properties were significantly deteriorated in inter-row versus in-row, mainly due to soil compaction induced by technological traffic. Density of total roots was higher in-row than inter-row, but the differences were not significant. Root density decreased more intensely with soil depth than with distance from tree trunks. Root density correlated with some soil properties. No repulsive effect of the roots of adjacent peach trees was noted. The decrease of root density with distance from trunk can be used in optimising tree arrangement. The conclusions could also be used in countries with similar growth conditions.

75 FR 3694 - Radio Broadcasting Services, Peach Springs, Arizona

Science.gov (United States)

2010-01-22

...., Fletcher, Heald & Hildreth, PLC, 1300 N. 17th Street - Eleventh Floor, Arlington, Virginia 22209 (Counsel... website, http://www.bcpiweb.com >. The proposed channel at Peach Springs is part of a hybrid application and rulemaking proceeding. In the application (File No. BNPH-20091016ADO), Cochise Media Licenses, the...

Non-destructive grading of peaches by near-infrared spectrometry

Science.gov (United States)

Carlomagno, G.; Capozzo, L.; Attolico, G.; Distante, A.

2004-12-01

This paper describes an experimental study on non-destructive methods for sorting peaches according to their degree of ripeness. The method is based on near-infrared (NIR) transmittance spectrometry in the region between 730 and 900 nm. It estimates the ripeness in terms of internal sugar content and firmness. A station for acquiring the NIR signal has been designed and realized, carefully choosing between several options for each component. Four different stations have been realized and compared during the experimental phase. The signals acquired by the station have been pre-processed using a noise-reducing method based on a packets-wavelet transform. In addition, an outlier detection technique has been applied for identifying irregular behaviors inside each of the considered classes. Finally, a minimum distance classifier estimates the grade of each experimental data. The results obtained in classification show that this early version of the station enables the correct discrimination of peaches with a percentage of 82.5%.

Relationship between endogenous hormonal content and somatic organogenesis in callus of peach (Prunus persica L. Batsch) cultivars and Prunus persica×Prunus dulcis rootstocks.

Science.gov (United States)

Pérez-Jiménez, Margarita; Cantero-Navarro, Elena; Pérez-Alfocea, Francisco; Le-Disquet, Isabel; Guivarc'h, Anne; Cos-Terrer, José

2014-05-01

The relationship between endogenous hormones content and the induction of somatic peach plant was studied. To induce multiple shoots from callus derived from the base of stem explants of the scion cultivars 'UFO-3', 'Flariba' and 'Alice Bigi', and the peach×almond rootstocks 'Garnem' and 'GF677', propagated plants were cultured on Murashige and Skoog salts augmented with 0.1mgL(-1) of indolebutyric acid, 1mgL(-1) of 6-benzylaminopurine and 3% sucrose. The highest regeneration rate was obtained with the peach×almond rootstocks. Endogenous levels of abscisic acid (ABA), indole-3-acetic acid (IAA), zeatin (Z), zeatin riboside (ZR), ethylene precursor 1-aminocyclopropane-1-carboxylic acid (ACC), salicylic acid (SA), and jasmonic acid (JA) were analyzed in the organogenic callus. Lower levels of several hormones, namely Z, ZR, ABA, and ACC were found in the peach×almond rootstock compared to peach cultivars, while IAA and SA presented inconclusive returns. These results suggest that the difference in somatic organogenesis capacity observed in peach and peach×almond hybrids is markedly affected by the endogenous hormonal content of the studied genotypes. Copyright © 2014 Elsevier GmbH. All rights reserved.

Fermentation Characteristics and Lactic Acid Bacteria Succession of Total Mixed Ration Silages Formulated with Peach Pomace

Directory of Open Access Journals (Sweden)

Xiaodong Hu

2015-04-01

Full Text Available The objective of this study was to assess the use of peach pomace in total mixed ration (TMR silages and clarify the differences in aerobic stability between TMR and TMR silages caused by lactic acid bacteria (LAB. The TMR were prepared using peach pomace, alfalfa hay or Leymus chinensis hay, maize meal, soybean meal, cotton meal, limestone, a vitamin-mineral supplement, and salt in a ratio of 6.0:34.0:44.4:7.0:5.0:2.5:1.0:0.1 on a dry matter (DM basis. Fermentation quality, microbial composition, and the predominant LAB were examined during ensiling and aerobic deterioration. The results indicated that the TMR silages with peach pomace were well fermented, with low pH and high lactic acid concentrations. The aerobic stability of TMR silages were significantly higher than that of TMR. Compared with TMR silages with alfalfa hay, TMR silage with Leymus chinensis hay was much more prone to deterioration. Although the dominant LAB were not identical in TMR, the same dominant species, Lactobacillus buchneri and Pediococcus acidilactici, were found in both types of TMR silages after 56 d of ensiling, and they may play an important role in the aerobic stability of TMR silages.

Peach Bottom Atomic Power Station, Unit 1. Semiannual operations report No. 72, January--June 1975

International Nuclear Information System (INIS)

1975-01-01

Defueling of the reactor was completed in June 1975. The fuel will be shipped to Aerojet Nuclear Co. in Idaho for long term storage. The primary coolant and auxiliary helium systems are being shut down. Activities are briefly described concerning health physics and maintenance. (FS)

Use of an influence diagram and fuzzy probability for evaluating accident management in a boiling water reactor

International Nuclear Information System (INIS)

Yu, D.; Kastenberg, W.E.; Okrent, D.

1994-01-01

A new approach is presented for evaluating the uncertainties inherent in severe accident management strategies. At first, this analysis considers accident management as a decision problem (i.e., applying a strategy compared with do nothing) and uses an influence diagram. To evaluate imprecise node probabilities in the influence diagram, the analysis introduces the concept of a fuzzy probability. When fuzzy logic is applied, fuzzy probabilities are easily propagated to obtain results. In addition, the results obtained provide not only information similar to the classical approach, which uses point-estimate values, but also additional information regarding the impact of using imprecise input data. As an illustrative example, the proposed methodology is applied to the evaluation of the drywell flooding strategy for a long-term station blackout sequence at the Peach Bottom nuclear power plant. The results show that the drywell flooding strategy is beneficial for preventing reactor vessel breach. It is also effective for reducing the probability of containment failure for both liner melt-through and late overpressurization. Even though uncertainty exists in the results, flooding is preferred to do nothing when evaluated in terms of two risk measures: early and late fatalities

Eddy current testing system for bottom mounted instrumentation welds

OpenAIRE

Kobayashi Noriyasu; Ueno Souichi; Suganuma Naotaka; Oodake Tatsuya; Maehara Takeshi; Kasuya Takashi; Ichikawa Hiroya

2015-01-01

The capability of eddy current testing (ECT) for the bottom mounted instrumentation (BMI) weld area of reactor vessel in a pressurized water reactor was demonstrated by the developed ECT system and procedure. It is difficult to position and move the probe on the BMI weld area because the area has complexly curved surfaces. The space coordinates and the normal vectors at the scanning points were calculated as the scanning trajectory of probe based on the measured results of surface shape on th...

Micropropagation of peach rootstocks and cultivars.

Science.gov (United States)

Balla, Ildikó; Mansvelt, Lucienne

2013-01-01

Peach (Prunus persica (L.) Batsch) is one of the most popular stone fruits, commercially produced largely in Mediterranean and, to a lesser extent, in continental climatic conditions. Several breeding programs with different aims release annually large numbers of new cultivars. Micropropagation offers a suitable method to provide the growers of sufficient quantities of rootstocks, as well as of pathogen-free planting material of old and new cultivars.An effective four-step micropropagation procedure for cultivar and rootstock production is described here, based on the use of modified MS and WPM media. The health status of the initial shoot tips is very important, also because the growth and proliferation rate of shoot cultures from virus-infected clones are generally very poor. Proliferation and elongation phases depend on the major macro-elements, as well as the content and ratio of plant growth regulators. It is important to grow the cultures at 22°C, as hyperhydricity may develop at higher temperatures. Although sucrose is the most common carbon source used during proliferation and rooting, for some peach cultivars and rootstocks the replacement of sucrose (10 g/L) with glucose (20 g/L) in the rooting medium improves the rooting and survival rates of plants in the acclimatization phase. The rooting rate of the rootstock "Cadaman" is improved with the chelated form of iron FeEDDHA at 150 mg/L. Rooted plants are acclimatized in greenhouse under high humidity conditions.

HTGR nuclear heat source component design and experience

International Nuclear Information System (INIS)

Peinado, C.O.; Wunderlich, R.G.; Simon, W.A.

1982-05-01

The high-temperature gas-cooled reactor (HTGR) nuclear heat source components have been under design and development since the mid-1950's. Two power plants have been designed, constructed, and operated: the Peach Bottom Atomic Power Station and the Fort St. Vrain Nuclear Generating Station. Recently, development has focused on the primary system components for a 2240-MW(t) steam cycle HTGR capable of generating about 900 MW(e) electric power or alternately producing high-grade steam and cogenerating electric power. These components include the steam generators, core auxiliary heat exchangers, primary and auxiliary circulators, reactor internals, and thermal barrier system. A discussion of the design and operating experience of these components is included

Nuclear reactor

International Nuclear Information System (INIS)

Tilliette, Z.

1975-01-01

A description is given of a nuclear reactor and especially a high-temperature reactor in which provision is made within a pressure vessel for a main cavity containing the reactor core and a series of vertical cylindrical pods arranged in spaced relation around the main cavity and each adapted to communicate with the cavity through two collector ducts or headers for the primary fluid which flows downwards through the reactor core. Each pod contains two superposed steam-generator and circulator sets disposed in substantially symmetrical relation on each side of the hot primary-fluid header which conveys the primary fluid from the reactor cavity to the pod, the circulators of both sets being mounted respectively at the bottom and top ends of the pod

Deficit irrigation of peach trees to reduce water consumption

Science.gov (United States)

Lack of water is a major limiting factor for production tree fruits such as peaches in the San Joaquin Valley of California and many other arid- or semi-arid regions in the world. Deficit irrigation can be used in some cropping systems as a water resource management strategy to reduce non-productiv...

Effects of modified atmosphere packaging on ripening of 'Douradão' peach related to pectolytic enzymes activities and chilling injury symptoms

Directory of Open Access Journals (Sweden)

Ligia Regina Radomille de Santana

2011-12-01

Full Text Available The present study evaluated the effects of modified atmosphere packaging on inhibition of the development of chilling injury symptoms in 'Douradão' peach after cold storage and the possible involvement of cell wall enzymes. Fruits were harvested at the middle stadium of ripening, packed in polypropylene trays and placed inside low density polyethylene (LDPE bags (30, 50, 60 and 75 µm of thickness with active modified atmosphere (10 kPa CO2 + 1.5 kPa O2, balance N2. The following treatments were tested: Control: peaches held in nonwrapped trays; MA30: LDPE film - 30 µm; MA50: LDPE film - 50 µm; MA60: LDPE film - 60 µm and MA75: LDPE film - 75 µm. Fruits were kept at 1±1ºC and 90±5% relative humidity (RH for 28 days. After 14, 21 and 28 days, samples were withdrawn from MAP and kept in air at 25±1ºC and 90±5% RH for ripening. On the day of removal and after 4 days, peaches were evaluated for woolliness incidence, pectolytic enzymes activities. The respiratory rate and ethylene synthesis were monitored during 6 days of ripening. The results showed that MA50 and MA60 treatments had positive effect on the inhibition of the development of woolly texture and reduced pectin methylesterase activity on the ripe fruits, keeping good quality of 'Douradão' peach during 28 days of cold storage. The treatments Control, MA30 and MA75 showed higher woolliness incidence and did not present marketable conditions after 14 days of cold storage.

Version VI of the ESTree db: an improved tool for peach transcriptome analysis

Science.gov (United States)

Lazzari, Barbara; Caprera, Andrea; Vecchietti, Alberto; Merelli, Ivan; Barale, Francesca; Milanesi, Luciano; Stella, Alessandra; Pozzi, Carlo

2008-01-01

Background The ESTree database (db) is a collection of Prunus persica and Prunus dulcis EST sequences that in its current version encompasses 75,404 sequences from 3 almond and 19 peach libraries. Nine peach genotypes and four peach tissues are represented, from four fruit developmental stages. The aim of this work was to implement the already existing ESTree db by adding new sequences and analysis programs. Particular care was given to the implementation of the web interface, that allows querying each of the database features. Results A Perl modular pipeline is the backbone of sequence analysis in the ESTree db project. Outputs obtained during the pipeline steps are automatically arrayed into the fields of a MySQL database. Apart from standard clustering and annotation analyses, version VI of the ESTree db encompasses new tools for tandem repeat identification, annotation against genomic Rosaceae sequences, and positioning on the database of oligomer sequences that were used in a peach microarray study. Furthermore, known protein patterns and motifs were identified by comparison to PROSITE. Based on data retrieved from sequence annotation against the UniProtKB database, a script was prepared to track positions of homologous hits on the GO tree and build statistics on the ontologies distribution in GO functional categories. EST mapping data were also integrated in the database. The PHP-based web interface was upgraded and extended. The aim of the authors was to enable querying the database according to all the biological aspects that can be investigated from the analysis of data available in the ESTree db. This is achieved by allowing multiple searches on logical subsets of sequences that represent different biological situations or features. Conclusions The version VI of ESTree db offers a broad overview on peach gene expression. Sequence analyses results contained in the database, extensively linked to external related resources, represent a large amount of

Evaluation of peach palm (Bactris gasipaes Kunth) processed by radiation

International Nuclear Information System (INIS)

Silva, Priscila Vieira da

2009-01-01

The peach palm can be obtained from several species of palms, but the peach palm has attracted great interest by producers, as has characteristics of precocity, rusticity and tillering, producing a palm-quality differentiating it from other palmettos for their sweet flavor and yellowish . The food irradiation has been used as a treatment to ensure microbiological food safety of products to avoid infection. Its use combined with minimal processing could increase the safety and quality of minimally processed vegetables. We aimed at evaluating the effect of gamma radiation and electron beams to control bacteria; assess the physical characteristics through analysis of color and texture in peach palm in natura minimally processed and subjected to ionizing radiation stored at 8 deg C as well as evaluating the sensory characteristics. The results in the microbiological analysis showed that ionizing radiation promotes reduction of microbial load in both treatments. In the analysis of color we can conclude that among all the treatments the sample irradiated with 1.5 kGy showed more differences when compared with the other samples. Observing texture characteristics we could conclude that irradiation changed the texture of the palm, unlike the treatment by electron beams that showed no difference between samples. For the sensory analysis, the gamma radiation with dose of 1.5 kGy, induced changes in sensory properties to the attributes and overall appearance. The dose of 1 kGy caused no significant difference, so a recommended dose for the irradiation of the studied product. (author)

An integrated approach for increasing breeding efficiency in apple and peach in Europe.

Science.gov (United States)

Laurens, Francois; Aranzana, Maria José; Arus, Pere; Bassi, Daniele; Bink, Marco; Bonany, Joan; Caprera, Andrea; Corelli-Grappadelli, Luca; Costes, Evelyne; Durel, Charles-Eric; Mauroux, Jehan-Baptiste; Muranty, Hélène; Nazzicari, Nelson; Pascal, Thierry; Patocchi, Andrea; Peil, Andreas; Quilot-Turion, Bénédicte; Rossini, Laura; Stella, Alessandra; Troggio, Michela; Velasco, Riccardo; van de Weg, Eric

2018-01-01

Despite the availability of whole genome sequences of apple and peach, there has been a considerable gap between genomics and breeding. To bridge the gap, the European Union funded the FruitBreedomics project (March 2011 to August 2015) involving 28 research institutes and private companies. Three complementary approaches were pursued: (i) tool and software development, (ii) deciphering genetic control of main horticultural traits taking into account allelic diversity and (iii) developing plant materials, tools and methodologies for breeders. Decisive breakthroughs were made including the making available of ready-to-go DNA diagnostic tests for Marker Assisted Breeding, development of new, dense SNP arrays in apple and peach, new phenotypic methods for some complex traits, software for gene/QTL discovery on breeding germplasm via Pedigree Based Analysis (PBA). This resulted in the discovery of highly predictive molecular markers for traits of horticultural interest via PBA and via Genome Wide Association Studies (GWAS) on several European genebank collections. FruitBreedomics also developed pre-breeding plant materials in which multiple sources of resistance were pyramided and software that can support breeders in their selection activities. Through FruitBreedomics, significant progresses were made in the field of apple and peach breeding, genetics, genomics and bioinformatics of which advantage will be made by breeders, germplasm curators and scientists. A major part of the data collected during the project has been stored in the FruitBreedomics database and has been made available to the public. This review covers the scientific discoveries made in this major endeavour, and perspective in the apple and peach breeding and genomics in Europe and beyond.

MEANS FOR SHIELDING AND COOLING REACTORS

Science.gov (United States)

Wigner, E.P.; Ohlinger, L.A.; Young, G.J.; Weinberg, A.M.

1959-02-10

Reactors of the water-cooled type and a means for shielding such a rcactor to protect operating personnel from harmful radiation are discussed. In this reactor coolant tubes which contain the fissionable material extend vertically through a mass of moderator. Liquid coolant enters through the bottom of the coolant tubes and passes upwardly over the fissionable material. A shield tank is disposed over the top of the reactor and communicates through its bottom with the upper end of the coolant tubes. A hydrocarbon shielding fluid floats on the coolant within the shield tank. With this arrangements the upper face of the reactor can be opened to the atmosphere through the two superimposed liquid layers. A principal feature of the invention is that in the event radioactive fission products enter thc coolant stream. imposed layer of hydrocarbon reduces the intense radioactivity introduced into the layer over the reactors and permits removal of the offending fuel material by personnel shielded by the uncontaminated hydrocarbon layer.

Measurement of percent hydrogen in the mechanical vacuum pump gas stream during BWR startup

International Nuclear Information System (INIS)

Garcia, Susan E.; Odell, Andrew D.; Giannelli, Joseph F.

2012-09-01

All U.S BWRs use a Mechanical Vacuum Pump (MVP) to establish condenser vacuum during start-ups, normally from the initial heat-up to the point where sufficient reactor steam pressure and flow is available to place the Steam Jet Air Ejector (SJAE) and off-gas treatment system in service. MVP operation is restricted to <5% power and gas stream concentrations of <4% H 2 , the lower flammability limit (LFL) for hydrogen/air mixtures. For a particular plant startup prior to hydrogen injection for hydrogen water chemistry (HWC), the MVP %H 2 would depend on the air in-leakage rate, the H 2 gas generation rate from radiolysis and the gas/steam transport rate from the reactor vessel to the main condenser. The radiolysis rate at low power, which is not precisely known and has not been modeled for the BWR, is normally assumed to increase in proportion to thermal power. Two thirds of the radiolytic gas by volume would be H 2 and one third O 2 . The MVP is not equipped with %H 2 sampling and measurement capability, and many MVP systems include no flow measurement. No U.S plant or literature data on MVP %H 2 were found. The industry-first Early Hydrogen Water Chemistry (EHWC) demonstration at the Peach Bottom 3 nuclear power plant involved hydrogen gas injection into the reactor vessel during startup while the MVP was in service. To support the EHWC project, it was necessary to collect baseline MVP %H 2 data during a startup without hydrogen injection and to monitor MVP %H 2 during the startup with EHWC. The MVP system had no normal sample point, but included test taps in the suction and discharge piping. A sampling method and apparatus was invented (EPRI patent pending), designed, built and applied to obtain %H 2 measurements in the MVP gas stream. The apparatus allowed a gas sample stream to be taken from either the suction (vacuum) or discharge side of the MVP. The gas sample stream was preconditioned to remove moisture (the MVP uses water as a liquid compressant), flowed to

Radionuclide release calculations for selected severe accident scenarios

International Nuclear Information System (INIS)

Denning, R.S.; Leonard, M.T.; Cybulskis, P.; Lee, K.W.; Kelly, R.F.; Jordan, H.; Schumacher, P.M.; Curtis, L.A.

1990-08-01

This report provides the results of source term calculations that were performed in support of the NUREG-1150 study. ''Severe Accident Risks: An Assessment for Five US Nuclear Power Plants.'' This is the sixth volume of a series of reports. It supplements results presented in the earlier volumes. Analyses were performed for three of the NUREG-1150 plants: Peach Bottom, a Mark I, boiling water reactor; Surry, a subatmospheric containment, pressurized water reactor; and Sequoyah, an ice condenser containment, pressurized water reactor. Complete source term results are presented for the following sequences: short term station blackout with failure of the ADS system in the Peach Bottom plant; station blackout with a pump seal LOCA for the Surry plant; station blackout with a pump seal LOCA in the Sequoyah plant; and a very small break with loss of ECC and spray recirculation in the Sequoyah plant. In addition, some partial analyses were performed which did not require running all of the modules of the Source Term Code Package. A series of MARCH3 analyses were performed for the Surry and Sequoyah plants to evaluate the effects of alternative emergency operating procedures involving primary and secondary depressurization on the progress of the accident. Only thermal-hydraulic results are provided for these analyses. In addition, three accident sequences were analyzed for the Surry plant for accident-induced failure of steam generator tubes. In these analyses, only the transport of radionuclides within the primary system and failed steam generator were examined. The release of radionuclides to the environment is presented for the phase of the accident preceding vessel meltthrough. 17 refs., 176 figs., 113 tabs

Breeding in peach, cherry and plum: from a tissue culture, genetic, transcriptomic and genomic perspective

Directory of Open Access Journals (Sweden)

Basilio Carrasco

2013-01-01

Full Text Available This review is an overview of traditional and modern breeding methodologies being used to develop new Prunus cultivars (stone fruits with major emphasis on peach, sweet cherry and Japanese plum. To this end, common breeding tools used to produce seedlings, including in vitro culture tools, are discussed. Additionally, the mechanisms of inheritance of many important agronomical traits are described. Recent advances in stone fruit transcriptomics and genomic resources are providing an understanding of the molecular basis of phenotypic variability as well as the identification of allelic variants and molecular markers. These have potential applications for understanding the genetic diversity of the Prunus species, molecular marker-assisted selection and transgenesis. Simple Sequence Repeat (SSR and Single Nucleotide Polymorphism (SNPs molecular markers are described as useful tools to describe genetic diversity in peach, sweet cherry and Japanese plum. Additionally, the recently sequenced peach genome and the public release of the sweet cherry genome are discussed in terms of their applicability to breeding programs

Efeito do hidrorresfriamento na qualidade de pêssegos 'Chimarrita' e 'Chiripá' Effect of hydrocooling on the quality of 'Chimarrita' and 'Chiripá' peaches

Directory of Open Access Journals (Sweden)

Eduardo Seibert

2007-08-01

Full Text Available No presente trabalho, foram avaliados os efeitos do hidrorresfriamento para manutenção da qualidade em pêssegos 'Chimarrita' e 'Chiripá'. O hidrorresfriamento foi realizado por imersão em água com gelo a 5ºC, sendo o abaixamento da temperatura monitorado por 3 minutos. O tratamento-controle foi transferência para a câmara fria imediatamente após a colheita dos pêssegos. Os frutos foram armazenados a 0ºC ('Chiripá' e 0,5ºC ('Chimarrita' por 7; 14 e 21 dias e avaliados na colheita, nas saídas de frio, seguidos de 2 a 3 dias a 20ºC para o amadurecimento. O hidrorresfriamento foi efetivo em retirar o calor de campo dos frutos. Os frutos hidrorresfriados desidrataram mais na armazenagem, e pêssegos de ambos os tratamentos apresentaram murchamento no amadurecimento. A ocorrência de podridões não diferiu entre pêssegos hidrorresfriados e controles no armazenamento, nas duas cultivares, mas foram maiores no tratamento-controle, no amadurecimento na 'Chimarrita'. A firmeza da polpa foi igual entre os tratamentos na 'Chimarrita' e superior nos pêssegos 'Chiripá' hidrorresfriados durante a armazenagem. No amadurecimento a 20°C, a firmeza de polpa de ambas as cultivares decresceu a valores semelhantes nos frutos-controle e nos hidrorresfriados. Após 21 dias em frio, 50% dos pêssegos da cv. Chiripá e 15% dos pêssegos da cv. Chimarrita, de ambos os tratamentos, apresentaram lanosidade. O distúrbio retenção de firmeza ocorreu em 20% dos pêssegos 'Chiripá' e em 50% dos 'Chimarrita'.In the present work the effects of hydro cooling on the quality of 'Chimarrita' and 'Chiripá' peaches were evaluated. Peaches were hydro cooled by immersion in water at 5ºC with flesh temperatures monitored for 3 minutes and thereafter stored at 0ºC ('Chiripá' or 0,5ºC ('Chimarrita' for 7, 14 or 21 days. Samples were evaluated at harvest, after retrieval from cold storage and after 2 or 3 more days at 20ºC for ripening. Hydrocooled peaches

Adapting the deep burn in-core fuel management strategy for the gas turbine - modular helium reactor to a uranium-thorium fuel

International Nuclear Information System (INIS)

Talamo, Alberto; Gudowski, Waclaw

2005-01-01

In 1966, Philadelphia Electric has put into operation the Peach Bottom I nuclear reactor, it was the first high temperature gas reactor (HTGR); the pioneering of the helium-cooled and graphite-moderated power reactors continued with the Fort St. Vrain and THTR reactors, which operated until 1989. The experience on HTGRs lead General Atomics to design the gas turbine - modular helium reactor (GT-MHR), which adapts the previous HTGRs to the generation IV of nuclear reactors. One of the major benefits of the GT-MHR is the ability to work on the most different types of fuels: light water reactors waste, military plutonium, MOX and thorium. In this work, we focused on the last type of fuel and we propose a mixture of 40% thorium and 60% uranium. In a uranium-thorium fuel, three fissile isotopes mainly sustain the criticality of the reactor: 235 U, which represents the 20% of the fresh uranium, 233 U, which is produced by the transmutation of fertile 232 Th, and 239 Pu, which is produced by the transmutation of fertile 238 U. In order to compensate the depletion of 235 U with the breeding of 233 U and 239 Pu, the quantity of fertile nuclides must be much larger than that one of 235 U because of the small capture cross-section of the fertile nuclides, in the thermal neutron energy range, compared to that one of 235 U. At the same time, the amount of 235 U must be large enough to set the criticality condition of the reactor. The simultaneous satisfaction of the two above constrains induces the necessity to load the reactor with a huge mass of fuel; that is accomplished by equipping the fuel pins with the JAERI TRISO particles. We start the operation of the reactor with loading fresh fuel into all the three rings of the GT-MHR and after 810 days we initiate a refueling and shuffling schedule that, in 9 irradiation periods, approaches the equilibrium of the fuel composition. The analysis of the k eff and mass evolution, reaction rates, neutron flux and spectrum at the

Development and Verification of Tritium Analyses Code for a Very High Temperature Reactor

International Nuclear Information System (INIS)

Oh, Chang H.; Kim, Eung S.

2009-01-01

A tritium permeation analyses code (TPAC) has been developed by Idaho National Laboratory for the purpose of analyzing tritium distributions in the VHTR systems including integrated hydrogen production systems. A MATLAB SIMULINK software package was used for development of the code. The TPAC is based on the mass balance equations of tritium-containing species and a various form of hydrogen (i.e., HT, H2, HTO, HTSO4, and TI) coupled with a variety of tritium source, sink, and permeation models. In the TPAC, ternary fission and neutron reactions with 6Li, 7Li 10B, 3He were taken into considerations as tritium sources. Purification and leakage models were implemented as main tritium sinks. Permeation of HT and H2 through pipes, vessels, and heat exchangers were importantly considered as main tritium transport paths. In addition, electrolyzer and isotope exchange models were developed for analyzing hydrogen production systems including both high-temperature electrolysis and sulfur-iodine process. The TPAC has unlimited flexibility for the system configurations, and provides easy drag-and-drops for making models by adopting a graphical user interface. Verification of the code has been performed by comparisons with the analytical solutions and the experimental data based on the Peach Bottom reactor design. The preliminary results calculated with a former tritium analyses code, THYTAN which was developed in Japan and adopted by Japan Atomic Energy Agency were also compared with the TPAC solutions. This report contains descriptions of the basic tritium pathways, theory, simple user guide, verifications, sensitivity studies, sample cases, and code tutorials. Tritium behaviors in a very high temperature reactor/high temperature steam electrolysis system have been analyzed by the TPAC based on the reference indirect parallel configuration proposed by Oh et al. (2007). This analysis showed that only 0.4% of tritium released from the core is transferred to the product hydrogen

Identification of differentially expressed genes associated with changes in the morphology of Pichia fermentans on apple and peach fruit.

Science.gov (United States)

Fiori, Stefano; Scherm, Barbara; Liu, Jia; Farrell, Robert; Mannazzu, Ilaria; Budroni, Marilena; Maserti, Bianca E; Wisniewski, Michael E; Migheli, Quirico

2012-11-01

Pichia fermentans (strain DISAABA 726) is an effective biocontrol agent against Monilinia fructicola and Botrytis cinerea when inoculated in artificially wounded apple fruit but is an aggressive pathogen when inoculated on wounded peach fruit, causing severe fruit decay. Pichia fermentans grows as budding yeast on apple tissue and exhibits pseudohyphal growth on peach tissue, suggesting that dimorphism may be associated with pathogenicity. Two complementary suppressive subtractive hybridization (SSH) strategies, that is, rapid subtraction hybridization (RaSH) and PCR-based subtraction, were performed to identify genes differentially expressed by P. fermentans after 24-h growth on apple vs. peach fruit. Gene products that were more highly expressed on peach than on apple tissue, or vice versa, were sequenced and compared with available yeast genome sequence databases. Several of the genes more highly expressed, when P. fermentans was grown on peach, were related to stress response, glycolysis, amino acid metabolism, and alcoholic fermentation but surprisingly not to cell wall degrading enzymes such as pectinases or cellulases. The dual activity of P. fermentans as both a biocontrol agent and a pathogen emphasizes the need for a thorough risk analysis of potential antagonists to avoid unpredictable results that could negatively impact the safe use of postharvest biocontrol strategies. © 2012 Federation of European Microbiological Societies. Published by Blackwell Publishing Ltd. All rights reserved.

Is home-based palliative care cost-effective? An economic evaluation of the Palliative Care Extended Packages at Home (PEACH) pilot.

Science.gov (United States)

McCaffrey, Nikki; Agar, Meera; Harlum, Janeane; Karnon, Jonathon; Currow, David; Eckermann, Simon

2013-12-01

The aim of this study was to evaluate the cost-effectiveness of a home-based palliative care model relative to usual care in expediting discharge or enabling patients to remain at home. Economic evaluation of a pilot randomised controlled trial with 28 days follow-up. Mean costs and effectiveness were calculated for the Palliative Care Extended Packages at Home (PEACH) and usual care arms including: days at home; place of death; PEACH intervention costs; specialist palliative care service use; acute hospital and palliative care unit inpatient stays; and outpatient visits. PEACH mean intervention costs per patient ($3489) were largely offset by lower mean inpatient care costs ($2450) and in this arm, participants were at home for one additional day on average. Consequently, PEACH is cost-effective relative to usual care when the threshold value for one extra day at home exceeds $1068, or $2547 if only within-study days of hospital admission are costed. All estimates are high uncertainty. The results of this small pilot study point to the potential of PEACH as a cost-effective end-of-life care model relative to usual care. Findings support the feasibility of conducting a definitive, fully powered study with longer follow-up and comprehensive economic evaluation.

Application of reliability-centered maintenance to boiling water reactor emergency core cooling systems fault-tree analysis

International Nuclear Information System (INIS)

Choi, Y.A.; Feltus, M.A.

1995-01-01

Reliability-centered maintenance (RCM) methods are applied to boiling water reactor plant-specific emergency core cooling system probabilistic risk assessment (PRA) fault trees. The RCM is a technique that is system function-based, for improving a preventive maintenance (PM) program, which is applied on a component basis. Many PM programs are based on time-directed maintenance tasks, while RCM methods focus on component condition-directed maintenance tasks. Stroke time test data for motor-operated valves (MOVs) are used to address three aspects concerning RCM: (a) to determine if MOV stroke time testing was useful as a condition-directed PM task; (b) to determine and compare the plant-specific MOV failure data from a broad RCM philosophy time period compared with a PM period and, also, compared with generic industry MOV failure data; and (c) to determine the effects and impact of the plant-specific MOV failure data on core damage frequency (CDF) and system unavailabilities for these emergency systems. The MOV stroke time test data from four emergency core cooling systems [i.e., high-pressure coolant injection (HPCI), reactor core isolation cooling (RCIC), low-pressure core spray (LPCS), and residual heat removal/low-pressure coolant injection (RHR/LPCI)] were gathered from Philadelphia Electric Company's Peach Bottom Atomic Power Station Units 2 and 3 between 1980 and 1992. The analyses showed that MOV stroke time testing was not a predictor for eminent failure and should be considered as a go/no-go test. The failure data from the broad RCM philosophy showed an improvement compared with the PM-period failure rates in the emergency core cooling system MOVs. Also, the plant-specific MOV failure rates for both maintenance philosophies were shown to be lower than the generic industry estimates

Elaboration of a strategy to control the peach twig borer Anarsia lineatella Zeller in the Sefrou region in Morocco

Directory of Open Access Journals (Sweden)

Asfers Adil

2016-12-01

Full Text Available Trapping by specific sex pheromones initiated in 2009 to monitor three pests, peach twig borer (Anarsia lineatella, oriental fruit moth (Cydia molesta and plum fruit moth (Grapholita funebrana revealed the greater importance of peach twig borer in comparison to the others. The results of monitoring the development of larval stages over time and the accumulated degree-days from biofix show that the pest develops five generations per year, one of which undergoes a diapause. In 2009 and 2010 chemical control based on tolerance threshold of 10 males/trap/2 weeks showed unsatisfactory results. With this method, the percentage of affected fruits increased from 6.8% in 2009 to 18.6% in 2010 despite the application of four treatments of organophosphate-based insecticides in 2009 and the application of four treatments in 2010 using active ingredients from different chemical families (pyrethroid, organophosphate and chlorinicotinyl. On the other hand, management of the peach twig borer by the degree-days method tested and planned on the basis of a bifenthrin treatment between 150 to 204 degree-days accumulated from biofix, gave interesting results where the percentage of affected fruits hardly exceeded 0.5% over the four years of study

Cloning and functional analysis of 9-cis-epoxycarotenoid dioxygenase (NCED) genes encoding a key enzyme during abscisic acid biosynthesis from peach and grape fruits.

Science.gov (United States)

Zhang, Mei; Leng, Ping; Zhang, Guanglian; Li, Xiangxin

2009-08-15

Ripening and senescence are generally controlled by ethylene in climacteric fruits like peaches, and the ripening process of grape, a non-climacteric fruit, may have some relationship to abscisic acid (ABA) function. In order to better understand the role of ABA in ripening and senescence of these two types of fruits, we cloned the 9-cis-epoxycarotenoid dioxygenase (NCED) gene that encodes a key enzyme in ABA biosynthesis from peaches and grapes using an RT-PCR approach. The NCED gene fragments were cloned from peaches (PpNCED1and PpNCED2, each 740bp) and grapes (VVNCED1, 741bp) using degenerate primers designed based on the conserved amino acids sequence of NCEDs in other plants. PpNCED1 showed 78.54% homology with PpNCED2, 74.90% homology with VVNCED1, and both showed high homology to NCEDs from other plants. The expression patterns of PpNCED1 and VVNCED1 were very similar. Both were highly expressed at the beginning of ripening when ABA content becomes high. The maximum ABA preceded ethylene production in peach fruit. ABA in the grape gradually increased from the beginning of ripening and reached the highest level at 20d before the harvest stage. However, ethylene remained at low levels during the entire process of fruit development, including ripening and senescence. ABA content, and ripening and softening of both types of fruits, were promoted or delayed by exogenous ABA or Fluridone (or NDGA) treatment. The roles of ABA and ethylene in the later ripening of fruit are complex. Based on results obtained in this study, we concluded that PpNCED1 and VVNCED1 initiate ABA biosynthesis at the beginning of fruit ripening, and that ABA accumulation might play a key role in the regulation of ripeness and senescence of both peach and grape fruits.

Bottom head assembly

International Nuclear Information System (INIS)

Fife, A.B.

1998-01-01

A bottom head dome assembly is described which includes, in one embodiment, a bottom head dome and a liner configured to be positioned proximate the bottom head dome. The bottom head dome has a plurality of openings extending there through. The liner also has a plurality of openings extending there through, and each liner opening aligns with a respective bottom head dome opening. A seal is formed, such as by welding, between the liner and the bottom head dome to resist entry of water between the liner and the bottom head dome at the edge of the liner. In the one embodiment, a plurality of stub tubes are secured to the liner. Each stub tube has a bore extending there through, and each stub tube bore is coaxially aligned with a respective liner opening. A seat portion is formed by each liner opening for receiving a portion of the respective stub tube. The assembly also includes a plurality of support shims positioned between the bottom head dome and the liner for supporting the liner. In one embodiment, each support shim includes a support stub having a bore there through, and each support stub bore aligns with a respective bottom head dome opening. 2 figs

Effect of gamma irradiation on refrigerator storage of peach fruits

International Nuclear Information System (INIS)

Kalinov, V.

1985-01-01

Peach fruits of cvs. Halle and Elberta were gamma irradiated by 0, 2.0, 2.5 and 3.0 kGy and stored in the usual way (20-25 grad C) or in refrigerator (5 and 0 grad C). The rate of mould decay, reduction in market quality and complex evaluation of the fruits at the time of storage were investigated. Linear regression correlations between the percentage of decay and the time of storage were estimated by probit-logarithmic transformation of the percentage of the decayed fruits. On that basis were assess the probable terms to reach 5% decay (permissible period of storage) and 10% decay. The criteria of quality and taste evaluation of the fruits for these periods were determined. The irradiation of peach fruits with 2.5 and 3.0 kGy prolonged 3 to 5 times the period free of decay (up to 5%) in the case of normal storage conditions as compared to the control (no irradiation). The sharp reduction in quality and the sensorial evaluation for these periods did not justify irradiation in case of usual storage conditions. Irradiation with the same rates in case of refrigeration storage proved a useful supplementary factor prolonging the periods before appearance of decay up to 17 days (i.e. 42% as compared to the control) and the permissible period of storage up to 25 days (25% more than the control). These results were obtained at a dose of 2.5 kGy for cv. Halle fruits, at dose 3.0 kGy for cv. Elberta fruits and at storage temperature of 0 grad C. For the periods up to 5% decay (25 to 26 days) the criteria of quality and the complex evaluation remained above the permissible level. Longer storage was not advisable because physiological damage of the fruit was evident

Pre-harvest application of calcium chloride and chitosan on fruit quality and storability of ‘Early Swelling’ peach during cold storage

Directory of Open Access Journals (Sweden)

Ahmed Abdel Nabi Abdel Gayed

Full Text Available ABSTRACT Studies related with the storage of peach fruits have received great relevance in Egypt. In this study, the effect of pre-harvest sprays of calcium chloride and chitosan, separately and in combination, on quality attributes and storability of peach fruits stored at 0±1 °C was studied. ‘Early Swelling’ peach trees were sprayed twice with 1% or 2% calcium chloride. The first spraying was at pea stage, while the second one was performed at 10 days before harvesting. Chitosan sprays were performed at 0.5 or 1%, alone or in combination with 1 and 2% calcium chloride, at 10 days before harvesting. Untreated trees served as control. Fruits were harvested at maturity stage, then packaged and stored at 0±1 °C and 85-90% of relative humidity. Fruit physical and chemical properties were evaluated at 7-day intervals. Results showed that pre-harvest application with 2% CaCl2+1% chitosan was most effective in minimizing weight loss (% and decay (%, as well as in maintaining maximum firmness and lengthening shelf life. Fruit color was not affected by any of the treatments, while untreated fruits and calcium chloride treatment alone, at both applied concentrations, maintained higher total soluble solids (TSS, %, total phenolic content, and lower titratable acidity percentage.

Physical aspects of liquid-impelled loop reactors

NARCIS (Netherlands)

Sonsbeek, van H.

1992-01-01

The liquid-impelled loop reactor (LLR) is a reactor that consists of two parts : the main tube and the circulation tube. Both parts are in open connection at the bottom and at the top. The reactor is filled with a liquid phase: the continuous phase. Another liquid phase is injected in the

Thermal inactivation of polyphenoloxidase and peroxidase in Jubileu clingstone peach and yeast isolated from its spoiled puree

Directory of Open Access Journals (Sweden)

Andréa Menezes Lopes

2014-03-01

Full Text Available The thermal inactivation of yeast isolated from spoiled Jubileu peach puree and that of polyphenoloxidase (PPO and peroxidase (POD in cv. Jubileu, which is widely cultivated in southern Rio Grande do Sul state, Brazil, were studied. PPO and POD were extracted using the protein powder method and submitted to partial purification by precipitation followed by dialysis. The enzymatic activity was determined measuring the increase in absorbance at 420 nm for PPO and 470 nm for POD. The yeast used in this investigation was isolated from spoiled Jubileu peach puree at 22 °Brix, with total initial microbial count of 22 × 10² UFCmL- 1. Stock cultures were maintained on potato dextrose agar (PDA slants at 4 °C and pH 5 for later use for microbial growth. In all cases, kinetic analysis of the results suggests that the thermal inactivation was well described by a first-order kinetic model, and the temperature dependence was significantly represented by the Arrhenius law. Both enzymes were affected by heat denaturation, and PPO was more thermostable. PPO was also more thermosTable than the yeast isolated from peach puree. The D60-values were 1.53 and 1.87 min for PPO and yeast isolated from spoiled Jubileu peach puree, respectively.

Nitrogen Removal from Milking Center Wastewater via Simultaneous Nitrification and Denitrification Using a Biofilm Filtration Reactor

Directory of Open Access Journals (Sweden)

Seung-Gun Won

2015-06-01

Full Text Available Milking center wastewater (MCW has a relatively low ratio of carbon to nitrogen (C/N ratio, which should be separately managed from livestock manure due to the negative impacts of manure nutrients and harmful effects on down-stream in the livestock manure process with respect to the microbial growth. Simultaneous nitrification and denitrification (SND is linked to inhibition of the second nitrification and reduces around 40% of the carbonaceous energy available for denitrification. Thus, this study was conducted to find the optimal operational conditions for the treatment of MCW using an attached-growth biofilm reactor; i.e., nitrogen loading rate (NLR of 0.14, 0.28, 0.43, and 0.58 kg m−3 d−1 and aeration rate of 0.06, 0.12, and 0.24 m3 h−1 were evaluated and the comparison of air-diffuser position between one-third and bottom of the reactor was conducted. Four sand packed-bed reactors with the effective volume of 2.5 L were prepared and initially an air-diffuser was placed at one third from the bottom of the reactor. After the adaptation period of 2 weeks, SND was observed at all four reactors and the optimal NLR of 0.45 kg m−3 d−1 was found as a threshold value to obtain higher nitrogen removal efficiency. Dissolved oxygen (DO as one of key operational conditions was measured during the experiment and the reactor with an aeration rate of 0.12 m3 h−1 showed the best performance of NH4-N removal and the higher total nitrogen removal efficiency through SND with appropriate DO level of ~0.5 mg DO L−1. The air-diffuser position at one third from the bottom of the reactor resulted in better nitrogen removal than at the bottom position. Consequently, nitrogen in MCW with a low C/N ratio of 2.15 was successfully removed without the addition of external carbon sources.

Determining The Factors Affecting Fruit Hardness of Different Peach Types with Meta Analysis

Directory of Open Access Journals (Sweden)

Hande Küçükönder

2014-09-01

Full Text Available The aim of this study is to determine the factor effective in determining the hardness of Caterina, Suidring, Royal Glory and Tirrenia peach types using meta analysis. In the study, the impact force (Fi and the contact time (tc were detected and the impulse values (I that are expressed as independent variable in the area under the curve were calculated in the measurements performed using the technique of a low-mass lateral impactor multiplicated with peach. Using the theory of elasticity, the independent variables were determined as Fmax (maximum impact force, contact time (tmax, Fmax/tmax, 1/tmax, 1/tmax2,5, Fmax/tmax 1.25 and Fmax2.5 parameters. The correlation coefficient values showing the relationship between these parameters and the dependent variable Magness-Taylor force (MT were calculated and were combined with meta-analysis by using the Hunter-Schmid and Fisher’s Z methods. The Cohen’s classification criterion was used in evaluating the resulting mean effect size (combined correlation value and in determining its direction. As a result of the meta-analysis, the mean effect size according to Hunter-Schmid method was found 0.436 (0.371-0.497 positively directed in 95% confidence interval, while it was found 0.468 (0.390-0.545 according to Fisher’s Z method. The effect sizes in both methods were determined “mid-level” according to the Cohen’s classification. When the significance level of the studies was analyzed with the Z test, all of the ones that taken into the meta analysis has been found statistically significant. As a result of the meta analysis in this study evaluating the relationship of peach types with the fruit hardness, the mean effect size has been found to reach “strong level”. Consequently, “maximum shock acceleration” was found to be a more effective factor comparing to the other factors in determining the the fruit hardness according to the results of meta analysis applied in both methods.

Synthesis of Zeolite-X from Bottom Ash for H2 Adsorption

Science.gov (United States)

Kurniawan, R. Y.; Romadiansyah, T. Q.; Tsamarah, A. D.; Widiastuti, N.

2018-01-01

Zeolite-X was synthesized from bottom ash power plant waste using fusion method on air atmosphere. The fused product dissolved in demineralized water and aluminate solution was added to adjust the SiO2/Al2O3 molar ratio gel prior hydrothermal process. The synthesis results were characterized using X-Ray Diffraction (XRD), Scanning Electron Microscope (SEM), and Fourier Transform Infrared (FTIR). The results showed that the zeolite-X has a high crystallinity with octahedral particle. The pure-form zeolite-X then was characterized and tested for H2 gas adsorption by gravimetric method to determine the H2 gas adsorption capacity of zeolite-X from bottom ash and it was compared to synthetic zeolite-X.

Comparative Study between Ethanolic and β-Cyclodextrin Assisted Extraction of Polyphenols from Peach Pomace

Directory of Open Access Journals (Sweden)

Nada El Darra

2018-01-01

Full Text Available Peach byproducts are often regarded as food waste despite their high content in health-promoting components. Amongst the latter, polyphenols are bioactive molecules with significant health benefits. The present study investigated an eco-friendly and cost-effective method using a GRAS food additive, β-cyclodextrin (β-CD, for the recovery of polyphenols from peach pomace. β-CD assisted extraction of polyphenols was compared to that of conventional solvent (ethanol extraction at the same concentrations (10 mg/mL, 20 mg/mL, 30 mg/mL, 40 mg/mL, and 50 mg/mL in terms of quality (antiradical activity and quantity. The extract obtained by 50 mg/mL β-CD assisted extraction showed the highest polyphenol (0.72 mg GAE/g DM and flavonoid (0.35 mg catechin/g of DM concentrations as maximal antiradical activity (6.82% and a noted antibacterial activity. Our results showed the competitiveness of β-CD assisted extraction to recover a high quantity and quality of polyphenols from peach pomace suggesting β-CD as a green alternative method for phenolic extraction.

Evaluation of fruit quality, bioactive compounds and total antioxidant activity of flat peach cultivars.

Science.gov (United States)

Di Vaio, Claudio; Marallo, Nadia; Graziani, Giulia; Ritieni, Alberto; Di Matteo, Antonio

2015-08-15

Fruit quality traits (fresh weight, dry weight, soluble solids content, titratable acidity and firmness) as well as the content of bioactive compounds (phenolic compounds) and total antioxidant activity were evaluated in four commercial cultivars of peach (Greta, Ufo 4, Rome Star and Ufo 6) and four of nectarine (Neve, Planet 1, Maria Carla and Mesembrina) differing in fruit shape (standard or flat) and flesh colour (white or yellow), important cultivars of the Italian and foreign market. The higher fruit organoleptic quality and nutritional profile of flat peach and nectarine cultivars make them candidates for exploiting new market opportunities and the chance to improve profits of farmers. The results showed that assayed quality parameters differed greatly among cultivars. In particular, flesh color and fruit shape accounted for most of the variation in traits underlying organoleptic and nutritional quality. Overall data suggested that the flat white-fleshed nectarine Planet 1, the yellow-fleshed nectarine Mesembrina and the yellow-fleshed peach Ufo 6, because of their profiles in terms of soluble solids content, titratable acidity and bioactive compounds, have the greatest potential to meet current consumer requirements. © 2014 Society of Chemical Industry.

Nuclear reactor

International Nuclear Information System (INIS)

Rau, P.

1980-01-01

The reactor core of nuclear reactors usually is composed of individual elongated fuel elements that may be vertically arranged and through which coolant flows in axial direction, preferably from bottom to top. With their lower end the fuel elements gear in an opening of a lower support grid forming part of the core structure. According to the invention a locking is provided there, part of which is a control element that is movable along the fuel element axis. The corresponding locking element is engaged behind a lateral projection in the opening of the support grid. The invention is particularly suitable for breeder or converter reactors. (orig.) [de

Nutritional status, yield and composition of peach fruit subjected to the application of organic compost

Directory of Open Access Journals (Sweden)

George Wellington Bastos de Melo

2016-01-01

Full Text Available The purpose of this study was to evaluate the nutritional state, yield and composition of peaches on peach trees subjected to the application of organic compost to the soil. This experiment was conducted during the 2008 and 2009 cropping season in an orchard containing Chimarrita cultivars grafted onto Capdeboscq rootstocks and Haplumbrept soils in the municipality of Farroupilha (RS, Brazil. The treatments included 0, 9, 18, 36, 72 and 144 liters of organic compost per plant-1 year-1. The total nutrient contents in the leaves, yield components, yields per plant and hectare and compositions of the fruits were evaluated in 2008 and 2009 soon after harvest and after 30 days of storage. The application of organic compost to the soil increased the yield components and the yields per plant and hectare in the two treatments with the highest compost additions, which indicated that the addition of 72 L of compost per plant-1 is ideal economically. The organic compost had little effect on the composition of the peach fruit after harvest and after 30 days of storage.

Comparative RNA-seq analysis of early-infected peach leaves by the invasive phytopathogen Xanthomonas arboricola pv. pruni.

Directory of Open Access Journals (Sweden)

Didier Socquet-Juglard

Full Text Available Xanthomonas arboricola pv. pruni is a quarantine bacterial pathogen that threatens peach production by causing necrotic spots on leaves and fruits, thus with the potential of severely reducing yields. The current understanding of the host plant defense responses to the pathogen is very limited. Using whole transcriptome sequencing, differential gene expression was analyzed at two time points, 2 h and 12 h post inoculation (hpi, by comparing the inoculated samples to their respective controls. On the total of 19,781 known peach genes that were expressed in all time points and conditions, 34 and 263 were differentially expressed at 2 and 12 hpi, respectively. Of those, 82% and 40% were up-regulated, respectively; and 18% and 60% were down-regulated, respectively. The functional annotation based on gene ontology (GO analysis highlighted that genes involved in metabolic process and response to stress were particularly represented at 2 hpi whereas at 12 hpi cellular and metabolic processes were the categories with the highest number of genes differentially expressed. Of particular interest among the differentially expressed genes identified were several pathogen-associated molecular pattern (PAMP receptors, disease resistance genes including several RPM1-like and pathogenesis related thaumatin encoding genes. Other genes involved in photosynthesis, in cell wall reorganization, in hormone signaling pathways or encoding cytochrome were also differentially expressed. In addition, novel transcripts were identified, providing another basis for further characterization of plant defense-related genes. Overall, this study gives a first insight of the peach defense mechanisms during the very early stages of infection with a bacterial disease in the case of a compatible interaction.

Influence of microwave radiation on the post harvest decay and quality of peach fruits in cold storage

International Nuclear Information System (INIS)

Azarpajoun, E.; Nikkhah, SH.

2009-01-01

This research has been carried out in Khorasan Agricultural and Natural Resources research center to study the effect of microwave radiation on storage time and control of peach fruit rot. Peach cultivars (Alberta, Red, White and Green of Mashad) were harvested in the first and second decades of June, July and September, sorted and stored at 4°C for 12 hours. Then fruits were treated with a Microwave with the Frequency at 2450 MHZ and two intensities, low (200 w) and high (800 w) for 30, 60 and 120 seconds, the treated and control fruits were laid on in plastic trays, packed in perforated polyethylene bags and stored in cold storage (0°C and 90-95% relative humidity) for 2 months. The qualitative tests including fruit rot, total soluble solids, titrable acidity, weight loss, firmness and color were assayed after 15, 30, 45 and 60 days. Sensory attributes were measured after 60 days storage. The experimental design was factorial in frame of completely randomized design. Multiple range test (Duncan) were used to compare the means. The results showed that treating the fruit with microwave decreased the fruit rot and increased pH, flesh firmness and total soluble solids of treated peach. Microwave radiation with the 800w for 60 seconds maintained the qualitative characteristics of fruits. Panel test confirmed these results. (author)

Searches for scalar top and scalar bottom quarks at LEP2

CERN Document Server

Barate, R; Décamp, D; Ghez, P; Goy, C; Lees, J P; Lucotte, A; Minard, M N; Nief, J Y; Pietrzyk, B; Casado, M P; Chmeissani, M; Comas, P; Crespo, J M; Delfino, M C; Fernández, E; Fernández-Bosman, M; Garrido, L; Juste, A; Martínez, M; Merino, G; Miquel, R; Mir, L M; Padilla, C; Park, I C; Pascual, A; Perlas, J A; Riu, I; Sánchez, F; Teubert, F; Colaleo, A; Creanza, D; De Palma, M; Gelao, G; Iaselli, Giuseppe; Maggi, G; Maggi, M; Marinelli, N; Nuzzo, S; Ranieri, A; Raso, G; Ruggieri, F; Selvaggi, G; Silvestris, L; Tempesta, P; Tricomi, A; Zito, G; Huang, X; Lin, J; Ouyang, Q; Wang, T; Xie, Y; Xu, R; Xue, S; Zhang, J; Zhang, L; Zhao, W; Abbaneo, D; Alemany, R; Bazarko, A O; Becker, U; Bright-Thomas, P G; Cattaneo, M; Cerutti, F; Dissertori, G; Drevermann, H; Forty, Roger W; Frank, M; Hagelberg, R; Hansen, J B; Harvey, J; Janot, P; Jost, B; Kneringer, E; Knobloch, J; Lehraus, Ivan; Mato, P; Minten, Adolf G; Moneta, L; Pacheco, A; Pusztaszeri, J F; Ranjard, F; Rizzo, G; Rolandi, Luigi; Rousseau, D; Schlatter, W D; Schmitt, M; Schneider, O; Tejessy, W; Tomalin, I R; Wachsmuth, H W; Wagner, A; Ajaltouni, Ziad J; Barrès, A; Boyer, C; Falvard, A; Ferdi, C; Gay, P; Guicheney, C; Henrard, P; Jousset, J; Michel, B; Monteil, S; Montret, J C; Pallin, D; Perret, P; Podlyski, F; Proriol, J; Rosnet, P; Rossignol, J M; Fearnley, Tom; Hansen, J D; Hansen, J R; Hansen, P H; Nilsson, B S; Rensch, B; Wäänänen, A; Daskalakis, G; Kyriakis, A; Markou, C; Simopoulou, Errietta; Vayaki, Anna; Blondel, A; Brient, J C; Machefert, F P; Rougé, A; Rumpf, M; Valassi, Andrea; Videau, H L; Focardi, E; Parrini, G; Zachariadou, K; Cavanaugh, R J; Corden, M; Georgiopoulos, C H; Hühn, T; Jaffe, D E; Antonelli, A; Bencivenni, G; Bologna, G; Bossi, F; Campana, P; Capon, G; Casper, David William; Chiarella, V; Felici, G; Laurelli, P; Mannocchi, G; Murtas, F; Murtas, G P; Passalacqua, L; Pepé-Altarelli, M; Curtis, L; Dorris, S J; Halley, A W; Knowles, I G; Lynch, J G; O'Shea, V; Raine, C; Scarr, J M; Smith, K; Teixeira-Dias, P; Thompson, A S; Thomson, E; Thomson, F; Turnbull, R M; Buchmüller, O L; Dhamotharan, S; Geweniger, C; Graefe, G; Hanke, P; Hansper, G; Hepp, V; Kluge, E E; Putzer, A; Sommer, J; Tittel, K; Werner, S; Wunsch, M; Beuselinck, R; Binnie, David M; Cameron, W; Dornan, Peter J; Girone, M; Goodsir, S M; Martin, E B; Morawitz, P; Moutoussi, A; Nash, J; Sedgbeer, J K; Spagnolo, P; Stacey, A M; Williams, M D; Ghete, V M; Girtler, P; Kuhn, D; Rudolph, G; Betteridge, A P; Bowdery, C K; Colrain, P; Crawford, G; Finch, A J; Foster, F; Hughes, G; Jones, R W L; Sloan, Terence; Whelan, E P; Williams, M I; Hoffmann, C; Jakobs, K; Kleinknecht, K; Quast, G; Renk, B; Rohne, E; Sander, H G; Van Gemmeren, P; Zeitnitz, C; Aubert, Jean-Jacques; Benchouk, C; Bonissent, A; Bujosa, G; Carr, J; Coyle, P; Diaconu, C A; Ealet, A; Fouchez, D; Konstantinidis, N P; Leroy, O; Motsch, F; Payre, P; Talby, M; Sadouki, A; Thulasidas, M; Tilquin, A; Trabelsi, K; Aleppo, M; Antonelli, M; Ragusa, F; Berlich, R; Blum, Walter; Büscher, V; Dietl, H; Ganis, G; Gotzhein, C; Kroha, H; Lütjens, G; Lutz, Gerhard; Männer, W; Moser, H G; Richter, R H; Rosado-Schlosser, A; Schael, S; Settles, Ronald; Seywerd, H C J; Saint-Denis, R; Stenzel, H; Wiedenmann, W; Wolf, G; Boucrot, J; Callot, O; Chen, S; Cordier, A; Davier, M; Duflot, L; Grivaz, J F; Heusse, P; Höcker, A; Jacholkowska, A; Jacquet, M; Kim, D W; Le Diberder, F R; Lefrançois, J; Lutz, A M; Nikolic, I A; Schune, M H; Serin, L; Simion, S; Tournefier, E; Veillet, J J; Videau, I; Zerwas, D; Azzurri, P; Bagliesi, G; Bettarini, S; Bozzi, C; Calderini, G; Ciulli, V; Dell'Orso, R; Fantechi, R; Ferrante, I; Giassi, A; Gregorio, A; Ligabue, F; Lusiani, A; Marrocchesi, P S; Messineo, A; Palla, Fabrizio; Sanguinetti, G; Sciabà, A; Sguazzoni, G; Steinberger, Jack; Tenchini, Roberto; Vannini, C; Venturi, A; Verdini, P G; Blair, G A; Bryant, L M; Chambers, J T; Gao, Y; Green, M G; Medcalf, T; Perrodo, P; Strong, J A; Von Wimmersperg-Töller, J H; Botterill, David R; Clifft, R W; Edgecock, T R; Haywood, S; Maley, P; Norton, P R; Thompson, J C; Wright, A E; Bloch-Devaux, B; Colas, P; Fabbro, B; Kozanecki, Witold; Lançon, E; Lemaire, M C; Locci, E; Pérez, P; Rander, J; Renardy, J F; Rosowsky, A; Roussarie, A; Schuller, J P; Schwindling, J; Trabelsi, A; Vallage, B; Black, S N; Dann, J H; Kim, H Y; Litke, A M; McNeil, M A; Taylor, G; Booth, C N; Boswell, R; Brew, C A J; Cartwright, S L; Combley, F; Kelly, M S; Lehto, M H; Newton, W M; Reeve, J; Thompson, L F; Affholderbach, K; Böhrer, A; Brandt, S; Cowan, G D; Foss, J; Grupen, Claus; Lutters, G; Saraiva, P; Smolik, L; Stephan, F; Apollonio, M; Bosisio, L; Della Marina, R; Giannini, G; Gobbo, B; Musolino, G; Pütz, J; Rothberg, J E; Wasserbaech, S R; Williams, R W; Armstrong, S R; Charles, E; Elmer, P; Ferguson, D P S; González, S; Greening, T C; Hayes, O J; Hu, H; Jin, S; McNamara, P A; Nachtman, J M; Nielsen, J; Orejudos, W; Pan, Y B; Saadi, Y; Scott, I J; Walsh, J; Wu Sau Lan; Wu, X; Yamartino, J M; Zobernig, G

1997-01-01

Searches for scalar top and bottom quarks have been performed with data collected by the ALEPH detector at LEP. The data sample consists of 21.7 pb^-1 taken at sqrt{s} = 161, 170, and 172~GeV and 5.7 pb^-1 taken at sqrt{s} = 130 and 136~GeV. No evidence for scalar top quarks or scalar bottom quarks was found in the channels stop --> c chi, stop --> b l snu, and sbottom --> b chi. For the channel stop --> c chi a limit of 67 GeV/c^2 has been set on the scalar top quark mass, independent of the mixing angle between the supersymmetric partners of the left and right-handed states of the top quark. This limit assumes a mass difference between the stop and the chi of at least 10 GeV/c^2. For the channel stop --> b l snu the mixing-angle independent scalar top limit is 70 GeV/c^2, assuming a mass difference between the stop and the snu of at least 10 GeV/c^2. For the channel sbottom --> b chi, a limit of 73 GeV/c^2 has been set on the mass of the supersymmetric partner of the left-handed state of the bottom quark. T...

PARR-2: reactor description and experiments

International Nuclear Information System (INIS)

Wyne, M.F.; Meghji, J.H.

1990-12-01

PARR-2 is a miniature neutron source reactor (MNSR) research reactor has been designed at the rate of 27 kW. Reactor assembly comprises of peaking characteristics with a self limiting flux. In this report reactor description with its assembly and instrumentation control system has been explained. The reactor engineering and physics experiments which can be performed on this reactor are explained in this report. PARR-2 is fueled with HEU fuel pins which are about 90% enriched in U-235. Specific requirements for the safety of the reactor, its building and the personnel, normal instrumentation as required in an industrial environment is sufficient. (A.B.)

Reactor BR2: Introduction

International Nuclear Information System (INIS)

Gubel, P.

2000-01-01

The BR2 reactor is still SCK-CEN's most important nuclear facility. After an extensive refurbishment to compensate for the ageing of the installation, the reactor was restarted in April 1997. A safety audit was conduced by the IAEA, the conclusions of which demonstrated the excellent performance of the plant in terms of operational safety. In 1999, the CALLISTO facility was extensively used for various programmes involving LWR pressure vessel materials, IASCC of LWR structural materials, fusion reactor materials and martensic steels for use in ADS systems. In 1999, BR2's commercial programmes were further developed

Material test reactor fuel research at the BR2 reactor

Energy Technology Data Exchange (ETDEWEB)

Dyck, Steven Van; Koonen, Edgar; Berghe, Sven van den [Institute for Nuclear Materials Science, SCK-CEN, Boeretang, Mol (Belgium)

2012-03-15

The construction of new, high performance material test reactor or the conversion of such reactors' core from high enriched uranium (HEU) to low enriched uranium (LEU) based fuel requires several fuel qualification steps. For the conversion of high performance reactors, high density dispersion or monolithic fuel types are being developed. The Uranium-Molybdenum fuel system has been selected as reference system for the qualification of LEU fuels. For reactors with lower performance characteristics, or as medium enriched fuel for high performance reactors, uranium silicide dispersion fuel is applied. However, on the longer term, the U-Mo based fuel types may offer a more efficient fuel alternative and-or an easier back-end solution with respect to the silicide based fuels. At the BR2 reactor of the Belgian nuclear research center, SCK-CEN in Mol, several types of fuel testing opportunities are present to contribute to such qualification process. A generic validation test for a selected fuel system is the irradiation of flat plates with representative dimensions for a fuel element. By flexible positioning and core loading, bounding irradiation conditions for fuel elements can be performed in a standard device in the BR2. For fuel element designs with curved plates, the element fabrication method compatibility of the fuel type can be addressed by incorporating a set of prototype fuel plates in a mixed driver fuel element of the BR2 reactor. These generic types of tests are performed directly in the primary coolant flow conditions of the BR2 reactor. The experiment control and interpretation is supported by detailed neutronic and thermal-hydraulic modeling of the experiments. Finally, the BR2 reactor offers the flexibility for irradiation of full size prototype fuel elements, as 200mm diameter irradiation channels are available. These channels allow the accommodation of various types of prototype fuel elements, eventually using a dedicated cooling loop to provide the

EBR-2 [Experimental Breeder Reactor-2], IFR [Integral Fast Reactor] prototype testing programs

International Nuclear Information System (INIS)

Lehto, W.K.; Sackett, J.I.; Lindsay, R.W.; Planchon, H.P.; Lambert, J.D.B.

1990-01-01

The Experimental Breeder Reactor-2 (EBR-2) is a sodium cooled power reactor supplying about 20 MWe to the Idaho National Engineering Laboratory (INEL) grid and, in addition, is the key component in the development of the Integral Fast Reactor (IFR). EBR-2's testing capability is extensive and has seen four major phases: (1) demonstration of LMFBR power plant feasibility, (2) irradiation testing for fuel and material development. (3) testing the off-normal performance of fuel and plant systems and (4) operation as the IFR prototype, developing and demonstrating the IFR technology associated with fuel and plant design. Specific programs being carried out in support of the IFR include advanced fuels and materials development and component testing. This paper discusses EBR-2 as the IFR prototype and the associated testing programs. 29 refs

76 FR 31295 - Nectarines and Peaches Grown in California; Notice of Withdrawal

Science.gov (United States)

2011-05-31

... forms to collect information related to the Federal marketing orders for nectarines and peaches grown in... FURTHER INFORMATION CONTACT: Andrew Hatch, Supervisory Marketing Specialist, Marketing Order... Email: [email protected] . SUPPLEMENTARY INFORMATION: Marketing Order Nos. 916 and 917...

Effects of exogenous salicylic acid on physiological traits and CBF gene expression in peach floral organs under freezing stress

Directory of Open Access Journals (Sweden)

Zhang Binbin

2017-01-01

Full Text Available To elucidate the effects of exogenous salicylic acid (SA treatment on the cold resistance of peach flower, the floral organs of two peach cultivars were treated with 20 mg/L SA and stored at 0°C for observation and sample collection. Water application was the control. After a treatment period, the anther relative water content of the control and SA-treated flowers decreased. The extent of the reduction was greater in the control, suggesting that the SA treatment significantly helped to maintain the anther water content of peach. Analysis of the stigma relative electric conductivity revealed that the SA treatment prevented membrane injury during the low temperature treatment. Additionally, we measured CBF gene expression at low temperature in the petal, stigma and ovary. The expression was markedly upregulated in the cold-treated floral organs. CBF gene expression after SA treatment was higher than in the control when cold conditions continued. These results suggest that the effects of SA on ameliorating the freezing injury to peach floral organs and on enhancing cold tolerance may be associated with the induction of CBF gene.

Application of autoregressive methods and Lyapunov coefficients for instability studies of nuclear reactors; Aplicação de métodos autorregressivos e coeficientes de Lyapunov para estudos de instabilidades em reatores nucleares

Energy Technology Data Exchange (ETDEWEB)

Aruquipa Coloma, Wilmer

2017-07-01

Nuclear reactors are susceptible to instability, causing oscillations in reactor power in specific working regions characterized by determined values of power and coolant mass flow. During reactor startup, there is a greater probability that these regions of instability will be present; another reason may be due to transient processes in some reactor parameters. The analysis of the temporal evolution of the power reveals a stable or unstable process after the disturbance in a light water reactor of type BWR (Boiling Water Reactor). In this work, the instability problem was approached in two ways. The first form is based on the ARMA (Autoregressive Moving Average models) model. This model was used to calculate the Decay Ratio (DR) and natural frequency (NF) of the oscillations, parameters that indicate if the one power signal is stable or not. In this sense, the DRARMA code was developed. In the second form, the problems of instability were analyzed using the classical concepts of non-linear systems, such as Lyapunov exponents, phase space and attractors. The Lyapunov exponents quantify the exponential divergence of the trajectories initially close to the phase space and estimate the amount of chaos in a system; the phase space and the attractors describe the dynamic behavior of the system. The main aim of the instability phenomena studies in nuclear reactors is to try to identify points or regions of operation that can lead to power oscillations conditions. The two approaches were applied to two sets of signals. The first set comes from signals of instability events of the commercial Forsmark reactors 1 and 2 and were used to validate the DRARMA code. The second set was obtained from the simulation of transient events of the Peach Bottom reactor; for the simulation, the PARCS and RELAP5 codes were used for the neutronic/thermal hydraulic coupling calculation. For all analyzes made in this work, the Matlab software was used due to its ease of programming and

Reactor BR2. Introduction

International Nuclear Information System (INIS)

Gubel, P.

2001-01-01

The BR2 is a materials testing reactor and is still one of SCK-CEN's important nuclear facilities. After an extensive refurbishment to compensate for the ageing of the installation, the reactor was restarted in April 1997. During the last three years, the availability of the installation was maintained at an average level of 97.6 percent. In the year 2000, the reactor was operated for a total of 104 days at a mean power of 56 MW. In 2000, most irradiation experiments were performed in the CALLISTO PWR loop. The report describes irradiations achieved or under preparation in 2000, including the development of advanced facilities and concept studies for new programmes. An overview of the scientific irradiation programmes as well as of the R and D programme of the BR2 reactor in 2000 is given

Reactor BR2. Introduction

Energy Technology Data Exchange (ETDEWEB)

Gubel, P

2001-04-01

The BR2 is a materials testing reactor and is still one of SCK-CEN's important nuclear facilities. After an extensive refurbishment to compensate for the ageing of the installation, the reactor was restarted in April 1997. During the last three years, the availability of the installation was maintained at an average level of 97.6 percent. In the year 2000, the reactor was operated for a total of 104 days at a mean power of 56 MW. In 2000, most irradiation experiments were performed in the CALLISTO PWR loop. The report describes irradiations achieved or under preparation in 2000, including the development of advanced facilities and concept studies for new programmes. An overview of the scientific irradiation programmes as well as of the R and D programme of the BR2 reactor in 2000 is given.

HYLIFE-II reactor chamber design refinements

International Nuclear Information System (INIS)

House, P.A.

1994-06-01

Mechanical design features of the reactor chamber for the HYLIFE-II inertial confinement fusion power plant are presented. A combination of oscillating and steady, molten salt streams (Li 2 BeF 4 ) are used for shielding and blast protection of the chamber walls. The system is designed for a 6 Hz repetition rate. Beam path clearing, between shots, is accomplished with the oscillating flow. The mechanism for generating the oscillating streams is described. A design configuration of the vessel wall allows adequate cooling and provides extra shielding to reduce thermal stresses to tolerable levels. The bottom portion of the reactor chamber is designed to minimize splash back of the high velocity (>12 m/s) salt streams and also recover up to half of the dynamic head. Cost estimates for a 1 GWe and 2 GWe reactor chamber are presented

Development of biocontrol agents from food microbial isolates for controlling post-harvest peach brown rot caused by Monilinia fructicola.

Science.gov (United States)

Zhou, Ting; Schneider, Karin E; Li, Xiu-Zhen

2008-08-15

An unconventional strategy of screening food microbes for biocontrol activity was used to develop biocontrol agents for controlling post-harvest peach brown rot caused by Monilinia fructicola. Forty-four microbial isolates were first screened for their biocontrol activity on apple fruit. Compared with the pathogen-only check, seven of the 44 isolates reduced brown rot incidence by >50%, including four bacteria: Bacillus sp. C06, Lactobacillus sp. C03-b and Bacillus sp. T03-c, Lactobacillus sp. P02 and three yeasts: Saccharomyces delbrueckii A50, S. cerevisiae YE-5 and S. cerevisiae A41. Eight microbial isolates were selected for testing on peaches by wound co-inoculation with mixtures of individual microbial cultures and conidial suspension of M. fructicola. Only two of them showed significant biocontrol activity after five days of incubation at 22 degrees C. Bacillus sp. C06 suppressed brown rot incidence by 92% and reduced lesion diameter by 88% compared to the pathogen-only check. Bacillus sp.T03-c reduced incidence and lesion diameter by 40% and 62%, respectively. The two isolates were compared with Pseudomonas syringae MA-4, a biocontrol agent for post-harvest peach diseases, by immersing peaches in an aliquot containing individual microbial isolates and the pathogen conidia. Treatments with isolates MA-4, C06 and T03-c significantly controlled brown rot by 91, 100, and 100% respectively. However, only isolates MA-4 and C06 significantly reduced brown rot by 80% and 15%, respectively when bacterial cells alone were applied. On naturally infected peaches, both the bacterial culture and its cell-free filtrate of the isolate C06 significantly controlled peach decay resulting in 77 and 90% reduction, respectively, whereas the treatment using only the bacterial cells generally had no effect. Isolate C06 is a single colony isolate obtained from a mesophilic cheese starter, and has been identified belonging to Bacillus amyloliquefaciens. The results have clearly

7 CFR 319.56-23 - Apricots, nectarines, peaches, plumcot, and plums from Chile.

Science.gov (United States)

2010-01-01

... organization of Chile (Servicio Agricola y Ganadero, referred to in this section as SAG) or a private export...) Responsibilities of Servicio Agricola y Ganadero. SAG will ensure that: (1) Apricots, nectarines, peaches, plumcot...

Physicochemical characterization of the peach palm (Bactris gasipaes Kunth, Arecaceae fruit skin residue flour obtained by convective drying

Directory of Open Access Journals (Sweden)

Jader Martínez-Girón

2017-09-01

Full Text Available The production of flour from residues of peach -palm fruit skin has been a forgotten topic from the view point of its physicochemical properties, because studies reported in the literature have focused on mesocarp flour characterization. The objective of this study was to evaluate the physicochemical properties of the peach palm fruit epicarp flour obtained by convective drying at 60±2 °C through a specific production and storage process. As a result, the flour was found to be a source of bioactive compounds, showing total phenol concentration (23.40±1.30 mg gallic acid/100 g, antioxidant activity (33.10%±3.20, total carotenoids (59.31±1.61 mg β-carotene/100 g, color a* (4.95±0.58, color b* (3.25±0.57, and luminosity (33.95±3.16. On the other hand, there was a high level of total carotenoids (85% and phenolic compounds (94% retention after six months. Additionally, color change showed no significant difference during storage. In conclusion, the flour obtained is a byproduct with properties that can be used as an alternative to agroalimentary substitutes, mainly due to its color and antioxidant activity attributes. It is noteworthy to mention that this is one of the first studies to physicochemically characterize peach palm fruit skin flour from Valle del Cauca (Colombia.

Endogenous hormones response to cytokinins with regard to organogenesis in explants of peach (Prunus persica L. Batsch) cultivars and rootstocks (P. persica × Prunus dulcis).

Science.gov (United States)

Pérez-Jiménez, Margarita; Cantero-Navarro, Elena; Pérez-Alfocea, Francisco; Cos-Terrer, José

2014-11-01

Organogenesis in peach (Prunus persica L. Batsch) and peach rootstocks (P. persica × Prunus dulcis) has been achieved and the action of the regeneration medium on 7 phytohormones, zeatin (Z), zeatin riboside (ZR), indole-3-acetic acid (IAA), abscisic acid (ABA), ethylene precursor 1-aminocyclopropane-1-carboxylic acid (ACC), salicylic acid (SA), and jasmonic acid (JA), has been studied using High performance liquid chromatography - mass spectrometry (HPLC-MS/MS). Three scion peach cultivars, 'UFO-3', 'Flariba' and 'Alice Bigi', and the peach × almond rootstocks 'Garnem' and 'GF677' were cultured in two different media, Murashige and Skoog supplemented with plant growth regulators (PGRs) (regeneration medium) and without PGRs (control medium), in order to study the effects of the media and/or genotypes in the endogenous hormones content and their role in organogenesis. The highest regeneration rate was obtained with the peach × almond rootstocks and showed a lower content of Z, IAA, ABA, ACC and JA. Only Z, ZR and IAA were affected by the action of the culture media. This study shows which hormones are external PGRs-dependent and what is the weight of the genotype and hormones in peach organogenesis that provide an avenue to manipulate in vitro organogenesis in peach. Copyright © 2014 Elsevier Masson SAS. All rights reserved.

Safety features of TR-2 reactor

International Nuclear Information System (INIS)

Tuerker, T.

2001-01-01

TR-2 is a swimming pool type research reactor with 5 MW thermal power and uses standard MTR plate type fuel elements. Each standard fuel element consist of 23 fuel plates with a meat + cladding thickness of 0.127 cm, coolant channel clearance is 0.21 cm. Originally TR-2 is designed for %93 enriched U-Al. Alloy fuel meat.This work is based on the preparation of the Final Safety Analyses Report (FSAR) of the TR-2 reactor. The main aspect is to investigate the behaviour of TR-2 reactor under the accident and abnormal operating conditions, which cowers the accident spectrum unique for the TR-2 reactor. This presentation covers some selected transient analyses which are important for the safety aspects of the TR-2 reactor like reactivity induced startup accidents, pump coast down (Loss of Flow Accident, LOFA) and other accidents which are charecteristic to the TR-2

High-speed BWR power plant simulations on the special-purpose peripheral processor AD10

International Nuclear Information System (INIS)

Wulff, W.; Cheng, H.S.; Lekach, S.V.; Mallen, A.N.

1985-01-01

A newly developed technique is described for fast, on-line simulations of normal and accidental transients in nuclear power plants. The technique is based on the utilization of the special-purpose peripheral processor AD10, which is specifically designed for high-speed systems simulations through integration of large systems of nonlinear ordinary differential equations. The Peach Bottom-II Boiling Water Reactor power plant has been simulated and results are presented. It is shown that the new technique not only advances safety analyses but also supports plant monitoring, failure diagnosis and accident mitigation, as well as the training of nuclear power plant operators. (author)

Study on thermodynamic cycle of high temperature gas-cooled reactor

International Nuclear Information System (INIS)

Qu Xinhe; Yang Xiaoyong; Wang Jie

2017-01-01

The development trend of the (very) High temperature gas-cooled reactor is to gradually increase the reactor outlet temperature. The different power conversion units are required at the different reactor outlet temperature. In this paper, for the helium turbine direct cycle and the combined cycle of the power conversion unit of the High temperature gas-cooled reactor, the mathematic models are established, and three cycle plans are designed. The helium turbine direct cycle is a Brayton cycle with recuperator, precooler and intercooler. In the combined cycle plan 1, the topping cycle is a simple Brayton cycle without recuperator, precooler and intercooler, and the bottoming cycle is based on the steam parameters (540deg, 6 MPa) recommended by Siemens. In the combined cycle plan 2, the topping cycle also is a simple Brayton cycle, and the bottoming cycle which is a Rankine cycle with reheating cycle is based on the steam parameters of conventional subcritical thermal power generation (540degC, 18 MPa). The optimization results showed that the cycle efficiency of the combined cycle plan 2 is the highest, the second is the helium turbine direct cycle, and the combined cycle plan 2 is the lowest. When the reactor outlet temperature is 900degC and the pressure ratio is 2.02, the cycle efficiency of the combined cycle plan 2 can reach 49.7%. The helium turbine direct cycle has a reactor inlet temperature above 500degC due to the regenerating cycle, so it requires a cooling circuit for the internal wall of the reactor pressure vessel. When the reactor outlet temperature increases, the increase of the pressure ratio required by the helium turbine direct cycle increases may bring some difficulties to the design and manufacture of the magnetic bearings. For the combined cycle, the reactor inlet temperature can be controlled below than 370degC, so the reactor pressure vessel can use SA533 steel without cooling the internal wall of the reactor pressure vessel. The pressure

Sodium-cooled nuclear reactor

International Nuclear Information System (INIS)

Hammers, H.W.

1982-01-01

The invention concerns a sodium-cooled nuclear reactor, whose reactor tank contains the primary circuit, shielding surrounding the reactor core and a primary/secondary heat exchanger, particularly a fast breeder reactor on the module principle. In order to achieve this module principle it is proposed to have electromagnetic circulating pumps outside the reactor tank, where the heat exchanger is accomodated in an annular case above the pumps. This case has several openings at the top end to the space above the reactor core, some smaller openings in the middle to the same space and is connected at the bottom to an annular space between the tank wall and the reactor core. As a favoured variant, it is proposed that the annular electromagnetic pumps should be arranged concentrically to the reactor tank, where there is an annual duct on the inside of the reactor tank. In this way the sodium-cooled nuclear reactor is made suitable as a module with a large number of such elements. (orig.) [de

Pre-symptomatic transcriptome changes during cold storage of chilling sensitive and resistant peach cultivars to elucidate chilling injury mechanisms

OpenAIRE

Puig, Clara Pons; Dagar, Anurag; Marti Ibanez, Cristina; Singh, Vikram; Crisosto, Carlos H; Friedman, Haya; Lurie, Susan; Granell, Antonio

2015-01-01

Background: Cold storage induces chilling injury (CI) disorders in peach fruit (woolliness/mealiness, flesh browning and reddening/bleeding) manifested when ripened at shelf life. To gain insight into the mechanisms underlying CI, we analyzed the transcriptome of 'Oded' (high tolerant) and 'Hermoza' (relatively tolerant to woolliness, but sensitive to browning and bleeding) peach cultivars at pre-symptomatic stages. The expression profiles were compared and validated with two previously analy...

Molecular cloning of plane pollen allergen Pla a 3 and its utility as diagnostic marker for peach associated plane pollen allergy.

Science.gov (United States)

Wangorsch, A; Larsson, H; Messmer, M; García-Moral, A; Lauer, I; Wolfheimer, S; Schülke, S; Bartra, J; Vieths, S; Lidholm, J; Scheurer, S

2016-05-01

Non-specific lipid transfer proteins (nsLTP) are considered to provoke allergic symptoms to plane tree pollen, which are frequently associated with peach allergy. The objective was to clone the cDNA of plane pollen nsLTP Pla a 3, to characterize IgE-binding and allergenic potency of recombinant Pla a 3 in comparison to its natural counterpart and peach nsLTP Pru p 3. Natural Pla a 3 was purified from plane pollen and analysed by mass spectrometry (MS). Recombinant Pla a 3 was characterized by SDS-PAGE and CD spectroscopy. Specific IgE to extract, components of plane pollen and Pru p 3 was measured by ImmunoCAP in sera of patients allergic to either plane pollen (n = 10), peach (n = 15) or both (n = 15). Biological potency of the proteins was investigated by in vitro mediator release assays and IgE cross-reactivity by competitive ELISA. Two Pla a 3 isoforms were identified. Recombinant Pla a 3 showed high purity, structural integrity, IgE-binding capacity comparable to nPla a 3 and biological potency. Sensitization to plane pollen extract was confirmed in 24/25 plane pollen allergics. The frequency of sensitization to Pla a 3 was 53% among patients allergic to both plane pollen and peach and 10% among plane pollen allergics tolerating peach where most patients were sensitized to Pla a 1. Pla a 3 and Pru p 3 showed strong bi-directional IgE cross-reactivity in patients allergic to peach and plane pollen, but not in peach allergics tolerating plane pollen. Levels of IgE-binding were generally higher to Pru p 3 than to Pla a 3. Sensitization to Pla a 3 is relevant in a subgroup of plane pollen allergics with concomitant peach allergy. IgE testing with Pla a 3 may serve as a marker to identify plane pollen allergic patients at risk of LTP-mediated food reactions and thereby improve in vitro diagnostic procedures. © 2016 John Wiley & Sons Ltd.

Reactor BR2. Introduction

International Nuclear Information System (INIS)

Gubel, P.

2002-01-01

The BR2 materials testing reactor is one of SCK-CEN's most important nuclear facilities. After an extensive refurbishment to compensate for the ageing of the installation, the reactor was restarted in April 1997. In 2001, the reactor was operated for a total of 123 days at a mean power of 59 MW in order to satisfy the irradiation conditions of the internal and external programmes using mainly the CALLISTO PWR loop. The mean consumption of fresh fuel elements was 5.26 per 1000 MWd. Main achievements in 2001 included the development of a three-dimensional full-scale model of the BR2 reactor for simulation and prediction of irradiation conditions for various experiments; the construction of the FUTURE-MT device designed for the irradiation of fuel plates under representative conditions of geometry, neutron spectrum, heat flux and thermal-hydraulic conditions and the development of in-pile instrumentation and a data acquisition system

Reactor BR2. Introduction

Energy Technology Data Exchange (ETDEWEB)

Gubel, P

2002-04-01

The BR2 materials testing reactor is one of SCK-CEN's most important nuclear facilities. After an extensive refurbishment to compensate for the ageing of the installation, the reactor was restarted in April 1997. In 2001, the reactor was operated for a total of 123 days at a mean power of 59 MW in order to satisfy the irradiation conditions of the internal and external programmes using mainly the CALLISTO PWR loop. The mean consumption of fresh fuel elements was 5.26 per 1000 MWd. Main achievements in 2001 included the development of a three-dimensional full-scale model of the BR2 reactor for simulation and prediction of irradiation conditions for various experiments; the construction of the FUTURE-MT device designed for the irradiation of fuel plates under representative conditions of geometry, neutron spectrum, heat flux and thermal-hydraulic conditions and the development of in-pile instrumentation and a data acquisition system.

Searches for scalar top and scalar bottom quarks at LEP2

Science.gov (United States)

ALEPH Collaboration; Barate, R.; Buskulic, D.; Decamp, D.; Ghez, P.; Goy, C.; Lees, J.-P.; Lucotte, A.; Minard, M.-N.; Nief, J.-Y.; Pietrzyk, B.; Casado, M. P.; Chmeissani, M.; Comas, P.; Crespo, J. M.; Delfino, M.; Fernandez, E.; Fernandez-Bosman, M.; Garrido, Ll.; Juste, A.; Martinez, M.; Merino, G.; Miquel, R.; Mir, Ll. M.; Padilla, C.; Park, I. C.; Pascual, A.; Perlas, J. A.; Riu, I.; Sanchez, F.; Teubert, F.; Colaleo, A.; Creanza, D.; de Palma, M.; Gelao, G.; Iaselli, G.; Maggi, G.; Maggi, M.; Marinelli, N.; Nuzzo, S.; Ranieri, A.; Raso, G.; Ruggieri, F.; Selvaggi, G.; Silvestris, L.; Tempesta, P.; Tricomi, A.; Zito, G.; Huang, X.; Lin, J.; Ouyang, Q.; Wang, T.; Xie, Y.; Xu, R.; Xue, S.; Zhang, J.; Zhang, L.; Zhao, W.; Abbaneo, D.; Alemany, R.; Bazarko, A. O.; Becker, U.; Bright-Thomas, P.; Cattaneo, M.; Cerutti, F.; Dissertori, G.; Drevermann, H.; Forty, R. W.; Frank, M.; Hagelberg, R.; Hansen, J. B.; Harvey, J.; Janot, P.; Jost, B.; Kneringer, E.; Knobloch, J.; Lehraus, I.; Mato, P.; Minten, A.; Moneta, L.; Pacheco, A.; Pusztaszeri, J.-F.; Ranjard, F.; Rizzo, G.; Rolandi, L.; Rousseau, D.; Schlatter, D.; Schmitt, M.; Schneider, O.; Tejessy, W.; Tomalin, I. R.; Wachsmuth, H.; Wagner, A.; Ajaltouni, Z.; Barrès, A.; Boyer, C.; Falvard, A.; Ferdi, C.; Gay, P.; Guicheney, C.; Henrard, P.; Jousset, J.; Michel, B.; Monteil, S.; Montret, J.-C.; Pallin, D.; Perret, P.; Podlyski, F.; Proriol, J.; Rosnet, P.; Rossignol, J.-M.; Fearnley, T.; Hansen, J. D.; Hansen, J. R.; Hansen, P. H.; Nilsson, B. S.; Rensch, B.; Wäänänen, A.; Daskalakis, G.; Kyriakis, A.; Markou, C.; Simopoulou, E.; Vayaki, A.; Blondel, A.; Brient, J. C.; Machefert, F.; Rougé, A.; Rumpf, M.; Valassi, A.; Videau, H.; Focardi, E.; Parrini, G.; Zachariadou, K.; Cavanaugh, R.; Corden, M.; Georgiopoulos, C.; Huehn, T.; Jaffe, D. E.; Antonelli, A.; Bencivenni, G.; Bologna, G.; Bossi, F.; Campana, P.; Capon, G.; Casper, D.; Chiarella, V.; Felici, G.; Laurelli, P.; Mannocchi, G.; Murtas, F.; Murtas, G. P.; Passalacqua, L.; Pepe-Altarelli, M.; Curtis, L.; Dorris, S. J.; Halley, A. W.; Knowles, I. G.; Lynch, J. G.; O'Shea, V.; Raine, C.; Scarr, J. M.; Smith, K.; Teixeira-Dias, P.; Thompson, A. S.; Thomson, E.; Thomson, F.; Turnbull, R. M.; Buchmüller, O.; Dhamotharan, S.; Geweniger, C.; Graefe, G.; Hanke, P.; Hansper, G.; Hepp, V.; Kluge, E. E.; Putzer, A.; Sommer, J.; Tittel, K.; Werner, S.; Wunsch, M.; Beuselinck, R.; Binnie, D. M.; Cameron, W.; Dornan, P. J.; Girone, M.; Goodsir, S.; Martin, E. B.; Morawitz, P.; Moutoussi, A.; Nash, J.; Sedgbeer, J. K.; Spagnolo, P.; Stacey, A. M.; Williams, M. D.; Ghete, V. M.; Girtler, P.; Kuhn, D.; Rudolph, G.; Betteridge, A. P.; Bowdery, C. K.; Colrain, P.; Crawford, G.; Finch, A. J.; Foster, F.; Hughes, G.; Jones, R. W. L.; Sloan, T.; Whelan, E. P.; Williams, M. I.; Hoffmann, C.; Jakobs, K.; Kleinknecht, K.; Quast, G.; Renk, B.; Rohne, E.; Sander, H.-G.; van Gemmeren, P.; Zeitnitz, C.; Aubert, J. J.; Benchouk, C.; Bonissent, A.; Bujosa, G.; Carr, J.; Coyle, P.; Diaconu, C.; Ealet, A.; Fouchez, D.; Konstantinidis, N.; Leroy, O.; Motsch, F.; Payre, P.; Talby, M.; Sadouki, A.; Thulasidas, M.; Tilquin, A.; Trabelsi, K.; Aleppo, M.; Antonelli, M.; Ragusa, F.; Berlich, R.; Blum, W.; Büscher, V.; Dietl, H.; Ganis, G.; Gotzhein, C.; Kroha, H.; Lütjens, G.; Lutz, G.; Männer, W.; Moser, H.-G.; Richter, R.; Rosado-Schlosser, A.; Schael, S.; Settles, R.; Seywerd, H.; St. Denis, R.; Stenzel, H.; Wiedenmann, W.; Wolf, G.; Boucrot, J.; Callot, O.; Chen, S.; Cordier, A.; Davier, M.; Duflot, L.; Grivaz, J.-F.; Heusse, Ph.; Höcker, A.; Jacholkowska, A.; Jacquet, M.; Kim, D. W.; Le Diberder, F.; Lefrançois, J.; Lutz, A.-M.; Nikolic, I.; Schune, M.-H.; Serin, L.; Simion, S.; Tournefier, E.; Veillet, J.-J.; Videau, I.; Zerwas, D.; Azzurri, P.; Bagliesi, G.; Bettarini, S.; Bozzi, C.; Calderini, G.; Ciulli, V.; dell'Orso, R.; Fantechi, R.; Ferrante, I.; Giassi, A.; Gregorio, A.; Ligabue, F.; Lusiani, A.; Marrocchesi, P. S.; Messineo, A.; Palla, F.; Sanguinetti, G.; Sciabà, A.; Sguazzoni, G.; Steinberger, J.; Tenchini, R.; Vannini, C.; Venturi, A.; Verdini, P. G.; Blair, G. A.; Bryant, L. M.; Chambers, J. T.; Gao, Y.; Green, M. G.; Medcalf, T.; Perrodo, P.; Strong, J. A.; von Wimmersperg-Toeller, J. H.; Botterill, D. R.; Clifft, R. W.; Edgecock, T. R.; Haywood, S.; Maley, P.; Norton, P. R.; Thompson, J. C.; Wright, A. E.; Bloch-Devaux, B.; Colas, P.; Fabbro, B.; Kozanecki, W.; Lançon, E.; Lemaire, M. C.; Locci, E.; Perez, P.; Rander, J.; Renardy, J.-F.; Rosowsky, A.; Roussarie, A.; Schuller, J.-P.; Schwindling, J.; Trabelsi, A.; Vallage, B.; Black, S. N.; Dann, J. H.; Kim, H. Y.; Litke, A. M.; McNeil, M. A.; Taylor, G.; Booth, C. N.; Boswell, R.; Brew, C. A. J.; Cartwright, S.; Combley, F.; Kelly, M. S.; Lehto, M.; Newton, W. M.; Reeve, J.; Thompson, L. F.; Affholderbach, K.; Böhrer, A.; Brandt, S.; Cowan, G.; Foss, J.; Grupen, C.; Lutters, G.; Saraiva, P.; Smolik, L.; Stephan, F.; Apollonio, M.; Bosisio, L.; della Marina, R.; Giannini, G.; Gobbo, B.; Musolino, G.; Putz, J.; Rothberg, J.; Wasserbaech, S.; Williams, R. W.; Armstrong, S. R.; Charles, E.; Elmer, P.; Ferguson, D. P. S.; González, S.; Greening, T. C.; Hayes, O. J.; Hu, H.; Jin, S.; McNamara, P. A., III; Nachtman, J. M.; Nielsen, J.; Orejudos, W.; Pan, Y. B.; Saadi, Y.; Scott, I. J.; Walsh, J.; Wu, Sau Lan; Wu, X.; Yamartino, J. M.; Zobernig, G.

1997-11-01

Searches for scalar top and bottom quarks have been performed with data collected by the ALEPH detector at LEP. The data sample consists of 21.7 pb-1 taken at sqrt(s) = 161, 170, and 172 GeV and 5.7 pb-1 taken at sqrt(s) = 130 and 136 GeV. No evidence for scalar top quarks or scalar bottom quarks was found in the channels t~-->cχ, t~-->blν~, and b~-->bχ. For the channel t~-->cχ a limit of 67 GeV/c2has been set on the scalar top quark mass, independent of the mixing angle between the supersymmetric partners of the left and right-handed states of the top quark. This limit assumes a mass difference between the t~ and the χ of at least 10 GeV/c2. For the channel t~-->blν~ the mixing-angle independent scalar top limit is 70 GeV/c2, assuming a mass difference between the t~ and the ν~ of at least 10 GeV/c2. For the channel b~-->bχ, a limit of 73 GeV/c2has been set on the mass of the supersymmetric partner of the left-handed state of the bottom quark. This limit is valid if the mass difference between the b~ and the χ is at least 10 GeV/c2.

Optimization of up-flow anaerobic sludge blanket reactor for ...

African Journals Online (AJOL)

Optimization of up-flow anaerobic sludge blanket reactor for treatment of composite ... AFRICAN JOURNALS ONLINE (AJOL) · Journals · Advanced Search ... Granules grown in the bottom part of UASB reactor were more compact and tense ...

Carbohydrate-free peach (Prunus persica and plum (Prunus domestica juice affects fecal microbial ecology in an obese animal model.

Directory of Open Access Journals (Sweden)

Giuliana D Noratto

Full Text Available BACKGROUND: Growing evidence shows the potential of nutritional interventions to treat obesity but most investigations have utilized non-digestible carbohydrates only. Peach and plum contain high amounts of polyphenols, compounds with demonstrated anti-obesity effects. The underlying process of successfully treating obesity using polyphenols may involve an alteration of the intestinal microbiota. However, this phenomenon is not well understood. METHODOLOGY/PRINCIPAL FINDINGS: Obese Zucker rats were assigned to three groups (peach, plum, and control, n = 10 each, wild-type group was named lean (n = 10. Carbohydrates in the fruit juices were eliminated using enzymatic hydrolysis. Fecal samples were obtained after 11 weeks of fruit or control juice administration. Real-time PCR and 454-pyrosequencing were used to evaluate changes in fecal microbiota. Over 1,500 different Operational Taxonomic Units at 97% similarity were detected in all rats. Several bacterial groups (e.g. Lactobacillus and members of Ruminococcacea were found to be more abundant in the peach but especially in the plum group (plum juice contained 3 times more total polyphenolics compared to peach juice. Principal coordinate analysis based on Unifrac-based unweighted distance matrices revealed a distinct separation between the microbiota of control and treatment groups. These changes in fecal microbiota occurred simultaneously with differences in fecal short-chain acids concentrations between the control and treatment groups as well as a significant decrease in body weight in the plum group. CONCLUSIONS: This study suggests that consumption of carbohydrate-free peach and plum juice has the potential to modify fecal microbial ecology in an obese animal model. The separate contribution of polyphenols and non-polyphenols compounds (vitamins and minerals to the observed changes is unknown.

Estimation of glycaemic index of peach palm (Bactris gasipaes) cooked fruits and chips, and pitahaya (Hylocereus spp.) pulp.

Science.gov (United States)

Jiménez, Gin; Gómez, Georgina; Pérez, Ana M; Blanco-Metzler, Adriana

2012-09-01

The glycaemic index (GI) is a physiological measure of a food's potential to increase postprandial blood glucose, as compared to the effect produced by food taken as reference, such as glucose or white bread. Currently researchers and consumers are interested in low GI foods, since their consumption is associated with better weight control and reduced risk of incidence of chronic diseases, like diabetes. In the present study, the GI value for peach palm cooked fruit, peach palm chips and pitahaya pulp was estimated. The methodology established by the FAO/WHO for determining the GI of food was used. A total of 12 healthy, non-smoking volunteers were selected and they ingested the fore mentioned foods on different occasions, in 25 g portions of available carbohydrates, after 12-14 h overnight fast. Blood glucose levels were measured in 30 min intervals up to 120 min after ingestion. Average GI value was 48 +/- 11 for the pitahaya pulp and 35 +/- 6 for the peach palm cooked fruit, which may be classified as low glyceamic index foods. The GI of peach palm chips was 60 +/- 7, corresponding to a food with a moderate GI. The processing for producing the chips caused an increase in the GI value when compared to the cooked fruit, probably because the stages of miIling, moulding and baking promote availability of starch during hydrolysis by the digestive enzymes.

Development of a Remotely-operated Visual Inspection System for Reactor Vessel Bottommounted Instrument Penetrations of KSNP and Lessons Learned

International Nuclear Information System (INIS)

Jeong, Kyungmin; Choi, Youngsu; Lee, Sunguk; Seo, Yongchil; Kang, Jong Gyu; Kim, Seungho; Jung, Seungho

2006-01-01

In April 2003, South Texas Project Unit 1 made a surprising discovery of boron acid leakage from two nozzles from a bare-metal examination of the reactor vessel bottom-mounted instrument penetrations during a routine refueling outage. A small powdery substance about 150mg was found on the outside of two instrument guide penetration nozzles on the bottom of the reactor. The primary coolant water of pressurized water reactors has caused cracking in penetrations with Alloy 600 through a process called primary water stress corrosion cracking. In South Korea, it is required to conduct 100% visual inspection of the outside of instrument guide penetration nozzles on the bottom of PWRs to confirm the integrity of reactor vessel. This paper describes the remotely-operated visual inspection systems for reactor vessel bottom-mounted instrument penetrations dispatched two times to Youngkwang NPPs and discusses the lessons learned

Adapting the deep burn in-core fuel management strategy for the gas turbine - modular helium reactor to a uranium-thorium fuel

Energy Technology Data Exchange (ETDEWEB)

Talamo, Alberto [Department of Nuclear and Reactor Physics, Royal Institute of Technology, Roslagstullsbacken 21, S-10691, Stockholm (Sweden)]. E-mail: alby@neutron.kth.se; Gudowski, Waclaw [Department of Nuclear and Reactor Physics, Royal Institute of Technology, Roslagstullsbacken 21, S-10691, Stockholm (Sweden)

2005-11-15

In 1966, Philadelphia Electric has put into operation the Peach Bottom I nuclear reactor, it was the first high temperature gas reactor (HTGR); the pioneering of the helium-cooled and graphite-moderated power reactors continued with the Fort St. Vrain and THTR reactors, which operated until 1989. The experience on HTGRs lead General Atomics to design the gas turbine - modular helium reactor (GT-MHR), which adapts the previous HTGRs to the generation IV of nuclear reactors. One of the major benefits of the GT-MHR is the ability to work on the most different types of fuels: light water reactors waste, military plutonium, MOX and thorium. In this work, we focused on the last type of fuel and we propose a mixture of 40% thorium and 60% uranium. In a uranium-thorium fuel, three fissile isotopes mainly sustain the criticality of the reactor: {sup 235}U, which represents the 20% of the fresh uranium, {sup 233}U, which is produced by the transmutation of fertile {sup 232}Th, and {sup 239}Pu, which is produced by the transmutation of fertile {sup 238}U. In order to compensate the depletion of {sup 235}U with the breeding of {sup 233}U and {sup 239}Pu, the quantity of fertile nuclides must be much larger than that one of {sup 235}U because of the small capture cross-section of the fertile nuclides, in the thermal neutron energy range, compared to that one of {sup 235}U. At the same time, the amount of {sup 235}U must be large enough to set the criticality condition of the reactor. The simultaneous satisfaction of the two above constrains induces the necessity to load the reactor with a huge mass of fuel; that is accomplished by equipping the fuel pins with the JAERI TRISO particles. We start the operation of the reactor with loading fresh fuel into all the three rings of the GT-MHR and after 810 days we initiate a refueling and shuffling schedule that, in 9 irradiation periods, approaches the equilibrium of the fuel composition. The analysis of the k {sub eff} and mass

BR2 Reactor: Introduction

International Nuclear Information System (INIS)

Moons, F.

2007-01-01

The irradiations in the BR2 reactor are in collaboration with or at the request of third parties such as the European Commission, the IAEA, research centres and utilities, reactor vendors or fuel manufacturers. The reactor also contributes significantly to the production of radioisotopes for medical and industrial applications, to neutron silicon doping for the semiconductor industry and to scientific irradiations for universities. Along the ongoing programmes on fuel and materials development, several new irradiation devices are in use or in design. Amongst others a loop providing enhanced cooling for novel materials testing reactor fuel, a device for high temperature gas cooled fuel as well as a rig for the irradiation of metallurgical samples in a Pb-Bi environment. A full scale 3-D heterogeneous model of BR2 is available. The model describes the real hyperbolic arrangement of the reactor and includes the detailed 3-D space dependent distribution of the isotopic fuel depletion in the fuel elements. The model is validated on the reactivity measurements of several tens of BR2 operation cycles. The accurate calculations of the axial and radial distributions of the poisoning of the beryllium matrix by 3 He, 6 Li and 3T are verified on the measured reactivity losses used to predict the reactivity behavior for the coming decades. The model calculates the main functionals in reactor physics like: conventional thermal and equivalent fission neutron fluxes, number of displacements per atom, fission rate, thermal power characteristics as heat flux and linear power density, neutron/gamma heating, determination of the fission energy deposited in fuel plates/rods, neutron multiplication factor and fuel burn-up. For each reactor irradiation project, a detailed geometry model of the experimental device and of its neighborhood is developed. Neutron fluxes are predicted within approximately 10 percent in comparison with the dosimetry measurements. Fission rate, heat flux and

Repeatability, correlation and path analysis of physical and chemical characteristics of peach fruits

Directory of Open Access Journals (Sweden)

Rosana Gonçalves Pires Matias

2014-12-01

Full Text Available This study aimed to determine the number of measurements necessary to evaluate physical and chemical characteristics of peach fruits, study the relationships between them and their direct and indirect effects on the content of ascorbic acid and total carotenoids. The characteristics skin and pulp color, fruit weight, suture, equatorial and polar diameters, firmness, soluble solids (SS, titratable acidity (TA, SS/TA ratio, ascorbic acid and total carotenoids were evaluated in 39 cultivars of peach and 3 cultivars of nectarine from the orchard of the Universidade Federal de Viçosa. The repeatability coefficient was estimated by ANOVA and CPCOR. Phenotypic correlation coefficients (rf were estimated and, after the multicollinearity diagnostics, they were unfolded to direct and indirect effects of the explanatory variables on the response variable using path analysis. There was agreement on the magnitude of repeatability coefficients obtained by the two methods; however, they varied among the 14 characteristics. The highest correlations were found between FW, SD, ED and PD. Seven fruits are sufficient to evaluate the physical and chemical characteristics of peach with a correlation coefficient of 90%. The characteristics considered in the path diagrams (b* skin, hº skin, b* pulp, hº pulp, ED, PD, FIR, SS, SS/AT and TC are not the main determinants of the ascorbic acid. The yellow hue of the pulp (hº pulp has the potential to be used in indirect selection for total carotenoids.

Formulation of a peach ice cream as potential symbiotic food

Directory of Open Access Journals (Sweden)

Fernando Josué VILLALVA

Full Text Available Abstract Today’s population increasingly demands and consumes healthy products. For this reason, the food industry has been developing and marketing food with added bioactive components. The aim of this work was to formulate a peach ice cream reduced in calories with an added probiotic (Bifidobacterium lactis Bb-12 and prebiotics (inulin, and to evaluate its sensory quality and acceptability as potential symbiotic food. The moisture content was 76.47%; 7.14% protein; 0.15% fat; 6.37%; carbohydrates; 9.87% inulin; 1.22% ash; 0.201% calcium, 0.155% phosphorus and 0.168% sodium. On the first and 21th day of storage counts of B. lactis Bb – 12 was 4 x 108 CFU/mL and 1.5 x 107 CFU/mL, respectively. It was possible to formulate a peach ice cream reduced in calories, fat, and sugar and with potential symbiotic effect, by addition of B. lactis Bb – 12. A product with suitable organoleptic characteristics, creamy texture, peachy colour, taste and flavour, and no ice crystals was obtained. This ice cream would be a suitable food matrix to incorporate prebiotic and probiotic ingredients as a potential symbiotic food.

Development of inertia-increased reactor internal pump

International Nuclear Information System (INIS)

Tanaka, Masaaki; Matsumura, Seiichi; Kikushima, Jun; Kawamura, Shinichi; Yamashita, Norimichi; Kurosaki, Toshikazu; Kondo, Takahisa

2000-01-01

The Reactor Internal Pump (RIP) was adopted for the Reactor Recirculation System (RRS) of Advanced Boiling Water Reactor (ABWR) plants, and ten RIPs are located at the bottom of the reactor pressure vessel. In order to simplify the power supply system for the RIPs, a new inertia-increased RIP was developed, which allows to eliminate the Motor-Generator (M-G) sets. The rotating inertia was increased approximately 2.5 times of current RIP inertia by addition of flywheel on its main shaft. A full scale proving test of the inertia-increased RIP under actual plant operating conditions using full scale test loop was performed to evaluate vibration characteristics and coast down characteristics. From the results of this proving test, the validity of the new inertia-increased RIP and its power supply system (without M-G sets) was confirmed. (author)

Development of observation techniques in reactor vessel of experimental fast reactor Joyo

International Nuclear Information System (INIS)

Takamatsu, Misao; Imaizumi, Kazuyuki; Nagai, Akinori; Sekine, Takashi; Maeda, Yukimoto

2010-01-01

In-Vessel Observations (IVO) techniques for Sodium cooled Fast Reactors (SFRs) are important in confirming its safety and integrity. And several IVO equipments for an SFR are developed. However, in order to secure the reliability of IVO techniques, it was necessary to demonstrate the performance under the actual reactor environment with high temperature, high radiation dose and remained sodium. During the investigation of an incident that occurred with Joyo, IVO using a standard Video Camera (VC) and a Radiation-Resistant Fiberscope (RRF) took place at (1) the top of the Sub-Assemblies (S/As) and the In-Vessel Storage rack (IVS), (2) the bottom face of the Upper Core Structure (UCS). A simple 6 m overhead view of each S/A, through the fuel handling or inspection holes etc, was photographed using a VC for making observations of the top of S/As and IVS. About 650 photographs were required to create a composite photograph of the top of the entire S/As and IVS, and a resolution was estimated to be approximately 1 mm. In order to observe the bottom face of the UCS, a Remote Handling Device (RHD) equipped with RRFs (approximately 13 m long) was specifically developed for Joyo with a tip that could be inserted into the 70 mm gap between the top of the S/As and the bottom of the UCS. A total of about 35,000 photographs were needed for the full investigation. Regarding the resolution, the sodium flow regulating grid of 0.8 mm in thickness could be discriminated. The performance of IVO equipments under the actual reactor environment was successfully confirmed. And the results provided useful information on incident investigations. In addition, fundamental findings and the experience gained during this study, which included the design of equipment, operating procedures, resolution, lighting adjustments, photograph composition and the durability of the RRF under radiation exposure, provided valuable insights into further improvements and verifications for IVO techniques to

HYLIFE-II reactor chamber mechanical design: Update

International Nuclear Information System (INIS)

House, P.A.

1992-01-01

Mechanical design features of the reactor chamber for the HYLIFE-II inertial confinement fusion power plant are presented. A combination of oscillating and steady, molten salt streams (Li 2 BeF 4 ) are used for shielding and blast protection of the chamber walls. The system is designed for a 6 Hz repetition rate. Beam path clearing, between shots, is accomplished with the oscillating flow. The mechanism for generating the oscillating streams is described. A design configuration of the vessel wall allows adequate cooling and provides extra shielding to reduce thermal stresses to tolerable levels. The bottom portion of the reactor chamber is designed to minimize splash back of the high velocity (17 m/s) salt streams and also recover up to half of the dynamic head. Cost estimates for a 1 GW e and 2 GW e reactor chamber are presented

Stresses in transition region of VVER-1000 reactor vessels

International Nuclear Information System (INIS)

Namgung, I.; Nguye, T.L.

2014-01-01

Most of the western PWR reactor's bottom head is hemi-spherical shape, however for Russian designed VVER family of reactor it is ellipsoidal shape. The transition region from shell side to ellipsoidal head and transition top flange to cylindrical shell develop higher stress concentration than western PWR reactor vessel. This region can be modeled as conical shell with varying thickness. The theoretical derivation of stress in the thick-walled conical cylinder with varying thickness was developed and shown in detail. The results is applied to VVER-1000 reactor vessel of which shell to bottom ellipsoidal shell and shell to upper flange were investigated for stress field. The theoretical calculations were also compared with FEM solutions. An axisymmetric 3D model of VVER-1000 reactor vessel (without closure head) FEM model was created and internal hydrostatic pressure boundary condition was applied. The stress results from FEM and theoretical calculation were compared, and the discrepancies and accuracies of the theoretical results were discussed. (author)

Stresses in transition region of VVER-1000 reactor vessels

Energy Technology Data Exchange (ETDEWEB)

Namgung, I. [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of); Nguye, T.L. [KEPCO International Nuclear Graduate School, Ulsan (Korea, Republic of); National Research Inst. of Mechanical Engineering, Hanoi City, Vietnam (China)

2014-07-01

Most of the western PWR reactor's bottom head is hemi-spherical shape, however for Russian designed VVER family of reactor it is ellipsoidal shape. The transition region from shell side to ellipsoidal head and transition top flange to cylindrical shell develop higher stress concentration than western PWR reactor vessel. This region can be modeled as conical shell with varying thickness. The theoretical derivation of stress in the thick-walled conical cylinder with varying thickness was developed and shown in detail. The results is applied to VVER-1000 reactor vessel of which shell to bottom ellipsoidal shell and shell to upper flange were investigated for stress field. The theoretical calculations were also compared with FEM solutions. An axisymmetric 3D model of VVER-1000 reactor vessel (without closure head) FEM model was created and internal hydrostatic pressure boundary condition was applied. The stress results from FEM and theoretical calculation were compared, and the discrepancies and accuracies of the theoretical results were discussed. (author)

The Status and Inspection of Bottom Mounted Instrumentation Nozzle in Korea

International Nuclear Information System (INIS)

Doh, Euisoon; Kim, Yoonwon; Kim, Jaeyoon; Lee, Tacksu; Lee, Changhun

2012-01-01

The PWSCC Cracking of Alloy 600 material has been issued since CRDM Penetration cracking of Bugey in France in 1990's. And J-groove weld cracking of CRDM at Oconee and PCR Nozzle cracking at Wolf Creek in USA were raising concern of the integrity for Dissimilar Metal Weld of Alloy 600. BMI(Bottom Mounted Instrumentation) Nozzle cracks were found at Takahama unit 1 in Japan and South Texas Project unit 1 in USA in 2003. And recent cracks of Reactor Head Vent line at Yonggwang unit 3 in Korea are enough to cause worry about the integrity for BMI Nozzles in Korea. BMI inspections of Westinghouse type plant were performed by KPS for Kori unit 1 in 2006, Ulchin unit 2 in 2007, and Kori unit 3 in 2008. The first inspection of OCR-1000 plant was carried out on May 2011 at Yonggwang unit 3. KPS developed the inspection technique of OCR-1000 plant for End Effector Module and controller, a quarterly actual sized Bottom head Mock up, Inspection probes meeting the regulatory guide lines and typical configuration of OCR-1000 plant. Two specimens with actual PWSCC cracks were used to demonstrate the Inspection technique of Detection and Sizing. and the quarterly actual sized Bottom head Mock up was very meaningful to check the Interference during the inspection by narrow gap between newly developments led to a successful inspection of the BMI Inspection. And the inspection was concurrently performed with 10 year Reactor Vessel ICI without hurting any critical path of the outage. This BMI inspection is contributing to keep Operational Safety of plants by prevention of Leakage at BMI nozzle and weld. And performing 10 Year ISI for BMI nozzle is very effective to prevent BMI nozzle Break by detecting PWSCC Initiation per PFM Sensitivity study

Microbiological analysis of peach palm in natura submitted to 60Co radiation

International Nuclear Information System (INIS)

Silva, Priscila V.; Araujo, Michel M.; Nunes, Thaise C.F.; Costa, Helbert S.F.; Villavicencio, Anna Lucia C.H.; Hojeije, Khalil Y.

2009-01-01

The palm tree (Bactris gasipaes Kunth) is a species with high potential benefits, because of the nutritional value of its fruits that could be used both in human and animals feeding and mainly for peach palm extraction. It represents a great source of dietary fiber and a moderate source of magnesium and iron. Food irradiation is a worldwide technology that aims to improve the product quality, in order to eliminate diverse microorganisms that can spoil the food. Radiation processing, in the recommended doses, causes very few chemical alterations and nutritional losses in foods, being considered insignificant and/or similar to other food treatments. The objective of this study was to evaluate the effect of irradiation on microbiological counts of mesophilic aerobic in the peach palm in natura. Samples were irradiated with 1.0 and 1.5 kGy using a 60 Co multipurpose irradiator. Radiation treatment appeared to be a useful alternative to reduce microbial contamination in the samples analyzed. (author)

Sensory profile of eleven peach cultivars Perfil sensorial de onze cultivares de pêssegos

Directory of Open Access Journals (Sweden)

Francine Lorena Cuquel

2012-03-01

Full Text Available The goal of this study was to evaluate the sensory profile of eleven peach cultivars grown in an experimental orchard located in the city of Lapa (PR, Brazil in two seasons. The peach cultivars analyzed were Aurora I, Chimarrita, Chiripá, Coral, Eldorado, Granada, Leonense, Maciel, Marli, Premier, and Vanguarda. The sensory analysis was performed by previously trained panelists; 20 of them in the first season and 10 in the second season. The sensory evaluation was performed using Quantitative Descriptive Analysis, in which the following attributes were measured: appearance, aroma, flesh color, flesh firmness, flavor, and juiciness. The results showed preference for sweet, soft, and juicy fruits. Chimarrita, Chiripá, and Coral fruits showed better sensorial performance than the other peach cultivars. It was also verified that the analysis of the attributes aroma, flesh firmness, and flavor is enough for performing the sensory profile of peach fruits for in natura consumption.Este trabalho teve como objetivo avaliar o perfil sensorial de onze cultivares de pêssego produzidos em duas safras em um pomar experimental implantado na Lapa (PR, Brasil. Os cultivares analisados foram Aurora I, Chimarrita, Chiripá, Coral, Eldorado, Granada, Leonense, Maciel, Marli, Premier e Vanguarda. As análises sensoriais foram realizadas por julgadores previamente treinados, sendo 20 julgadores na primeira safra e 10 na segunda. O método de avaliação empregado foi a Análise Descritiva Quantitativa na qual foram mensurados os atributos aparência, aroma, cor de polpa, firmeza de polpa, sabor e suculência dos frutos. Os resultados obtidos demonstraram a preferência por frutos de sabor adocicado, com polpa macia e suculenta. Os cultivares Chimarrita, Chiripá e Coral obtiveram o melhor desempenho nas análises sensoriais. Foi verificado ainda que os atributos aroma, firmeza de polpa e sabor são considerados suficientes para a avaliação do perfil sensorial de

Peach Bottom Atomic Power Station, Units 2 and 3. Annual operating report: January--December 1976

International Nuclear Information System (INIS)

1977-01-01

Unit 2 experienced 11 forced outages, 5 power reductions, and one major refueling outage which lasted about 3 months during which time the feedwater spargers were replaced. Net electrical power generated was 5,569,633 MWH with the generator on line 5,998 hrs. Unit 3 experienced 17 forced outages, 11 power reductions and 2 major outages. The first refueling outage began 12/24/77. Net electrical power generated was 6,049,644 MWH with the unit on line 6,829 hrs. Information is presented concerning operations, personnel exposures, radioactive releases, maintenance, and irradiated fuel examination

Construction for holding together a cylindrical high pressure reactor vessel with hemispherical bottom and lid

International Nuclear Information System (INIS)

Desmarchais, W.E.; Braun, H.E.

1972-01-01

The construction shall prevent that in case of ruptures of the vessel rupture pieces may damage the secondary shielding system. The construction consists of two yokes fitting to the bottom and the lid of the vessel and held together by means of pull rods. The yokes are designed as truncated conshaped shells. The smaller end of the cone shells supports the hemispherical bottom and the lid of the vessel. The larger cone shell ends are tied together by the pull rods. As further improvements there may be arranged hemispherical protective shields between the hemispherical bottom and the lid of the vessel and the smaller end of the cone shells. (P.K.)

Application of MCNPX 2.7.D for reactor core management at the research reactor BR2

International Nuclear Information System (INIS)

Kalcheva, Silva; Koonen, Edgar

2011-01-01

The paper discusses application of the Monte Carlo burn up code MCNPX 2.7.D for whole core criticality and depletion analysis of the Material Testing Research Reactor BR2 at SCK-CEN in Mol, Belgium. Two different approaches in the use of MCNPX 2.7.D are presented. The first methodology couples the evolution of fuel depletion, evaluated by MCNPX 2.7.D in an infinite lattice with a steady-state 3-D power distribution in the full core model. The second method represents fully automatic whole core depletion and criticality calculations in the detailed 3-D heterogeneous geometry model of the BR2 reactor. The accuracy of the method and computational time as function of the number of used unique burn up materials in the model are being studied. The depletion capabilities of MCNPX 2.7.D are compared vs. the developed at the BR2 reactor department MCNPX & ORIGEN-S combined method. Testing of MCNPX 2.7.D on the criticality measurements at the BR2 reactor is presented. (author)

Top-down or bottom-up modelling. An application to CO2 abatement

International Nuclear Information System (INIS)

Laroui, F.; Van Leeuwen, M.J.

1995-06-01

In four articles a comparison is made of bottom-up, or engineers'' models, and top-down models, which comprise macro-econometric models, computable general equilibrium models and also models in the system dynamics tradition. In the first article the history of economic modelling is outlined. In the second article the multi-sector macro-economic Computable General Equilibrium model for the Netherlands is described. It can be used to study the long-term effects of fiscal policy measures on economic and environmental indicators, in particular the effects on the level of CO2-emissions. The aim of article 3 is to describe the structure of the electricity supply industry in the UK and how it can be represented in a bottom-up sub-model within a more general E3 sectoral model of the UK economy. The objective of the last paper (4) is mainly a methodological discussion about integrating top-down and bottom-up models which can be used to assess CO2 abatement policies impacts on economic activity

Homogeneous SLOWPOKE reactors for replacing SLOWPOKE-2 research reactors and the production of radioisotopes

International Nuclear Information System (INIS)

Bonin, H.W.; Hilborn, J.W.; Carlin, G.E.; Gagnon, R.; Busatta, P.

2014-01-01

Inspired from the inherently safe SLOWPOKE-2 research reactor, the Homogeneous SLOWPOKE reactor was conceived with a double goal: replacing the heterogeneous SLOWPOKE-2 reactors when they reach end-of-core life to continue their missions of neutron activation analysis and neutron radiography at universities, and to produce radioisotopes such as 99 Mo for medical applications. A homogeneous reactor core allows a much simpler extraction of radioisotopes (such as 99 Mo) for applications in industry and nuclear medicine. The 20 kW Homogeneous SLOWPOKE reactor was modelled using both the deterministic WIMS-AECL and the probabilistic MCNP 5 reactor simulation codes. The homogeneous fuel mixture was a dilute aqueous solution of Uranyl Sulfate (UO 2 SO 4 ) with 994.2 g of 235 U (enrichment at 20%) providing an excess reactivity at operating temperature (40 o C) of 3.8 mk for a molality determined as 1.46 mol kg -1 for a Zircaloy-2 reactor vessel. Because this reactor is intended to replace the core of SLOWPOKE-2 reactors, the Homogeneous SLOWPOKE reactor core had a height about twice its diameter. The reactor could be controlled by mechanical absorber rods in the beryllium reflector, chemical control in the core, or a combination of both. The safety of the Homogeneous SLOWPOKE reactor was analysed for both normal operation and transient conditions. Thermal-hydraulics calculations used COMSOL Multiphysics and the results showed that natural convection was sufficient to ensure adequate reactor cooling in all situations. The most severe transient simulated resulted from a 5.87 mk step positive reactivity insertion to the reactor in operation at critical and at steady state at 20 o C. Peak temperature and power were determined as 83 o C and 546 kW, respectively, reached 5.1 s after the reactivity insertion. However, the power fell rapidly to values below 20 kW some 35 s after the peak and remained below that value thereafter. Both the temperature and void coefficients are

Homogeneous SLOWPOKE reactors for replacing SLOWPOKE-2 research reactors and the production of radioisotopes

Energy Technology Data Exchange (ETDEWEB)

Bonin, H.W., E-mail: bonin-h@rmc.ca [Royal Military College of Canada, Kingston, Ontario (Canada); Hilborn, J.W. [Canadian Nuclear Laboratories, Chalk River, Ontario (Canada); Carlin, G.E. [Ontario Power Generation, Toronto, Ontario (Canada); Gagnon, R.; Busatta, P. [Canadian Forces (Canada)

2014-07-01

Inspired from the inherently safe SLOWPOKE-2 research reactor, the Homogeneous SLOWPOKE reactor was conceived with a double goal: replacing the heterogeneous SLOWPOKE-2 reactors when they reach end-of-core life to continue their missions of neutron activation analysis and neutron radiography at universities, and to produce radioisotopes such as {sup 99}Mo for medical applications. A homogeneous reactor core allows a much simpler extraction of radioisotopes (such as {sup 99}Mo) for applications in industry and nuclear medicine. The 20 kW Homogeneous SLOWPOKE reactor was modelled using both the deterministic WIMS-AECL and the probabilistic MCNP 5 reactor simulation codes. The homogeneous fuel mixture was a dilute aqueous solution of Uranyl Sulfate (UO{sub 2}SO{sub 4}) with 994.2 g of {sup 235}U (enrichment at 20%) providing an excess reactivity at operating temperature (40 {sup o}C) of 3.8 mk for a molality determined as 1.46 mol kg{sup -1} for a Zircaloy-2 reactor vessel. Because this reactor is intended to replace the core of SLOWPOKE-2 reactors, the Homogeneous SLOWPOKE reactor core had a height about twice its diameter. The reactor could be controlled by mechanical absorber rods in the beryllium reflector, chemical control in the core, or a combination of both. The safety of the Homogeneous SLOWPOKE reactor was analysed for both normal operation and transient conditions. Thermal-hydraulics calculations used COMSOL Multiphysics and the results showed that natural convection was sufficient to ensure adequate reactor cooling in all situations. The most severe transient simulated resulted from a 5.87 mk step positive reactivity insertion to the reactor in operation at critical and at steady state at 20 {sup o}C. Peak temperature and power were determined as 83 {sup o}C and 546 kW, respectively, reached 5.1 s after the reactivity insertion. However, the power fell rapidly to values below 20 kW some 35 s after the peak and remained below that value thereafter. Both the

Origin and Dispersal of Domesticated Peach Palm

Directory of Open Access Journals (Sweden)

Charles R. Clement

2017-11-01

Full Text Available Peach palm (Bactris gasipaes Kunth is a Neotropical palm domesticated by Native Americans. Its domestication resulted in a set of landraces (var. gasipaes, some with very starchy fruit used for fermentation, others with an equilibrium of starch and oil used as snacks. Which of the three wild types (var. chichagui was involved and where the domestication process began are unclear, with three hypotheses under discussion: an origin in southwestern Amazonia; or in northwestern South America; or multiple origins. We reevaluate one of the wild types, defining it as the incipient domesticate, and then evaluate these hypotheses using the Brazilian peach palm Core Collection and selected herbaria samples to: (1 model the potential distributions of wild and domesticated populations; (2 identify the probable origin of domestication with a phylogeographic analysis of chloroplast DNA sequences; and (3 determine the dispersal routes after domestication using spatial analysis of genetic diversity based on 17 nuclear microsatellite loci. The two very small-fruited wild types have distinct distributions in the northern Andes region and across southern Amazonia, both under moderately humid climates, while the incipient domesticate, partly sympatric with the southern wild type, is also found along the Equatorial Andes, in a more humid climatic envelope, more similar to that of the domesticated landraces. Two distribution models for Last Glacial Maximum conditions (CCSM4, MIROC also suggest distinct distributions for the two wild populations. The chloroplast DNA phylogeographic network confirms the area of sympatry of the incipient domesticate and the southern wild type in southwestern Amazonia as the origin of domestication. The spatial patterns of genetic diversity confirm the proposal of two dispersals, one along the Ucayali River, into western Amazonia, northwestern South America and finally Central America; the other along the Madeira River into central and

Mining microsatellites in the peach genome: development of new long-core SSR markers for genetic analyses in five Prunus species.

Science.gov (United States)

Dettori, Maria Teresa; Micali, Sabrina; Giovinazzi, Jessica; Scalabrin, Simone; Verde, Ignazio; Cipriani, Guido

2015-01-01

A wide inventory of molecular markers is nowadays available for individual fingerprinting. Microsatellites, or simple sequence repeats (SSRs), play a relevant role due to their relatively ease of use, their abundance in the plant genomes, and their co-dominant nature, together with the availability of primer sequences in many important agricultural crops. Microsatellites with long-core motifs are more easily scored and were adopted long ago in human genetics but they were developed only in few crops, and Prunus species are not among them. In the present work the peach whole-genome sequence was used to select 216 SSRs containing long-core motifs with tri-, tetra- and penta-nucleotide repeats. Microsatellite primer pairs were designed and tested for polymorphism in the five diploid Prunus species of economic relevance (almond, apricot, Japanese plum, peach and sweet cherry). A set of 26 microsatellite markers covering all the eight chromosomes, was also selected and used in the molecular characterization, population genetics and structure analyses of a representative sample of the five diploid Prunus species, assessing their transportability and effectiveness. The combined probability of identity between two random individuals for the whole set of 26 SSRs was quite low, ranging from 2.30 × 10(-7) in peach to 9.48 × 10(-10) in almond, confirming the usefulness of the proposed set for fingerprinting analyses in Prunus species.

Core monitoring at the WNP-2 reactor

International Nuclear Information System (INIS)

Skeen, D.R.; Torres, R.H.; Burke, W.J.; Jenkins, I.; Jones, S.W.

1992-01-01

The WNP-2 reactor is a 3,323-MW(thermal) boiling water reactor (BWR) that is operated by the Washington Public Power Supply System. The WNP-2 reactor began commercial operation in 1984 and is currently in its eighth cycle. The core monitoring system used for the first cycle of operation was supplied by the reactor vendor. Cycles 2 through 6 were monitored with the POWERPLEX Core Monitoring Software System (CMSS) using the XTGBWR simulation code. In 1991, the supply system upgraded the core monitoring system by installing the POWERPLEX 2 CMSS prior to the seventh cycle of operation for WNP-2. The POWERPLEX 2 CMSS was developed by Siemens Power Corporation (SPC) and is based on SPC's advanced state-of-the-art reactor simulator code MICROBURN-B. The improvements in the POWERPLEX 2 system are possible as a result of advances in minicomputer hardware

Comparison of 2D and 3D Neutron Transport Analyses on Yonggwang Unit 3 Reactor

International Nuclear Information System (INIS)

Maeng, Aoung Jae; Kim, Byoung Chul; Lim, Mi Joung; Kim, Kyung Sik; Jeon, Young Kyou; Yoo, Choon Sung

2012-01-01

10 CFR Part 50 Appendix H requires periodical surveillance program in the reactor vessel (RV) belt line region of light water nuclear power plant to check vessel integrity resulting from the exposure to neutron irradiation and thermal environment. Exact exposure analysis of the neutron fluence based on right modeling and simulations is the most important in the evaluation. Traditional 2 dimensional (D) and 1D synthesis methodologies have been widely applied to evaluate the fast neutron (E > 1.0 MeV) fluence exposure to RV. However, 2D and 1D methodologies have not provided accurate fast neutron fluence evaluation at elevations far above or below the active core region. RAPTOR-M3G (RApid Parallel Transport Of Radiation - Multiple 3D Geometries) program for 3D geometries calculation was therefore developed both by Westinghouse Electronic Company, USA and Korea Reactor Integrity Surveillance Technology (KRIST) for the analysis of In-Vessel Surveillance Test and Ex-Vessel Neutron Dosimetry (EVND). Especially EVND which is installed at active core height between biological shielding material and concrete also evaluates axial neutron fluence by placing three dosimetries each at Top, Middle and Bottom part of the angle representing maximum neutron fluence. The EVND programs have been applied to the Korea Nuclear Plants. The objective of this study is therefore to compare the 3D and the 2D Neutron Transport Calculations and Analyses on the Yonggwang unit 3 Reactor as an example

Reactor-core-reactivity control device

International Nuclear Information System (INIS)

Miura, Teruo; Sakuranaga, Tomonobu.

1983-01-01

Purpose: To improve the reactor safety upon failures of control rod drives by adapting a control rod not to drop out accidentally from the reactor core but be inserted into the reactor core. Constitution: The control rod is entered or extracted as usual from the bottom of the pressure vessel. A space is provided above the reactor core within the pressure vessel, in which the moving scope of the control rod is set between the space above the reactor core and the reactor core. That is, the control rod is situated above the reactor core upon extraction thereof and, if an accident occurs to the control rod drive mechanisms to detach the control rod and the driving rod, the control rod falls gravitationally into the reactor core to improve the reactor safety. In addition, since the speed limiter is no more required to the control rod, the driving force can be decreased to reduce the size of the rod drive mechanisms. (Ikeda, J.)

Phytosanitary irradiation of peach fruit moth (Lepidoptera: Carposinidae) in apple fruits

Science.gov (United States)

Zhan, Guoping; Li, Baishu; Gao, Meixu; Liu, Bo; Wang, Yuejin; Liu, Tao; Ren, Lili

2014-10-01

Peach fruit moth, Carposina sasakii Matsumura, is a serious pest of many pome and stone fruits and presents a quarantine problem in some export markets. It is widely distributed in pome fruit production areas in China, Japan, Korea, North Korea and the Far Eastern Federal District of Russia. In this investigation, gamma radiation dose-response tests were conducted with late eggs (5-d-old) and various larval stages, followed by large-scale confirmatory tests on the most tolerant stage in fruit, the fifth instar. The dose-response tests, with the target radiation dose of 20 (late eggs), 40, 60, 80, 100, 120, 140, and 160 Gy (late fifth instars in vitro) respectively applied to all stages, showed that the tolerance to radiation increased with increasing age and developmental stage. The fifth instar (most advanced instar in fruits) was determined to be the most tolerant stage requiring an estimated minimum absorbed dose of 208.6 Gy (95% CI: 195.0, 226.5 Gy) to prevent adult emergence at 99.9968% efficacy (95% confidence level). In the confirmatory tests, irradiation was applied to 30,850 late fifth instars in apple fruits with a target dose of 200 Gy (171.6-227.8 Gy measured), but only 4 deformed adults emerged that died 2 d afterwards without laying eggs. A dose of 228 Gy may be recommended as a phytosanitary irradiation treatment under ambient atmosphere for the control of peach fruit moth on all commodities with an efficacy of 99.9902% at 95% confidence level.

Decontamination effects of bark washing with a high-pressure washer on Peach [Prunus persica (L.) Batsch] and Japanese Persimmon (Diospyros kaki Thunb.) contaminated with radiocaesium during dormancy

International Nuclear Information System (INIS)

Sato, Mamoru; Abe, Kazuhiro; Kikunaga, Hidetoshi; Ohtsuki, Tsutomu; Takata, Daisuke; Tanoi, Keitaro; Muramatsu, Yasuyuki

2015-01-01

The effect of bark washing with a high-pressure washer on deciduous trees contaminated during dormancy by radiocaesium fallout derived from the Fukushima Daiichi Nuclear Power Plant accident was examined using peach [Prunus persica (L.) Batsch] and Japanese persimmon (Diospyros kaki Thunb.). Eighteen-year-old peach trees ('Akatsuki') were bark-washed twice with a high-pressure washer on July 5 and 27, 2011. Seven-year-old peach trees ('Kawanakajima Hakuto') were bark-washed on January 24, 2012, and thirty-year-old Japanese persimmon trees ('Hachiya') were bark-washed on December 21, 2011. For the peach trees, most of the bark was not removed by washing with a high-pressure washer. In contrast, the rough bark of Japanese persimmon was removed completely. No significant differences in the 137 Cs concentration of 'Akatsuki' fruit were found between the treatments conducted in the summer of 2011. Upon the bark washing of peach 'Akatsuki' trees in summer, the possibility of secondary contamination of leaves via the leachate containing 137 Cs was likely. The 137 Cs concentrations in fruits and leaves of peach 'Kawanakajima Hakuto' collected in summer 2012 were decreased significantly by washing treatment conducted in winter 2011–2012. In the year after treatment, the 137 Cs concentrations in fruits and leaves of Japanese persimmon were significantly decreased by the treatment. The effect of the bark washing on decreasing 137 Cs contents in fruits and leaves was greater in Japanese persimmon than in peach. The results for 'Kawanakajima Hakuto' and 'Hachiya' demonstrated the possibility of additive contamination. (author)

Pulsed fusion reactors

International Nuclear Information System (INIS)

1975-01-01

This summer school specialized in examining specific fusion center systems. Papers on scientific feasibility are first presented: confinement of high-beta plasma, liners, plasma focus, compression and heating and the use of high power electron beams for thermonuclear reactors. As for technological feasibility, lectures were on the theta-pinch toroidal reactors, toroidal diffuse pinch, electrical engineering problems in pulsed magnetically confined reactors, neutral gas layer for heat removal, the conceptual design of a series of laser fusion power plants with ''Saturn'', implosion experiments and the problem of the targets, the high brightness lasers for plasma generation, and topping and bottoming cycles. Some problems common to pulsed reactors were examined: energy storage and transfer, thermomechanical and erosion effects in the first wall and blanket, the problems of tritium production, radiation damage and neutron activation in blankets, and the magnetic and inertial confinement

Reactor containing facility

International Nuclear Information System (INIS)

Akagawa, Katsuhiko.

1992-01-01

A cooling space having a predetermined capacity is formed between a reactor container and concrete walls. A circulation loop disposed to the outside of the concrete walls is connected to the top and the bottom of the cooling space. The circulation loop has a circulation pump and a heat exchanger, and a cooling water supply pipe is connected to the upstream of the circulation pump for introducing cooling water from the outside. Upon occurrence of loss of coolant accident, cooling water is introduced from the cooling water supply pipe to the cooling space between the reactor container and the concrete walls after shut-down of the reactor operation. Then, cooling water is circulated while being cooled by the heat exchanger, to cool the reactor container by cooling water flown in the cooling space. This can cool the reactor container in a short period of time upon occurrence of the loss of coolant accident. Accordingly, a repairing operation for a ruptured portion can be conducted rapidly. (I.N.)

TA-2 Water Boiler Reactor Decommissioning Project

International Nuclear Information System (INIS)

Durbin, M.E.; Montoya, G.M.

1991-06-01

This final report addresses the Phase 2 decommissioning of the Water Boiler Reactor, biological shield, other components within the biological shield, and piping pits in the floor of the reactor building. External structures and underground piping associated with the gaseous effluent (stack) line from Technical Area 2 (TA-2) Water Boiler Reactor were removed in 1985--1986 as Phase 1 of reactor decommissioning. The cost of Phase 2 was approximately $623K. The decommissioning operation produced 173 m 3 of low-level solid radioactive waste and 35 m 3 of mixed waste. 15 refs., 25 figs., 3 tabs

Method of safely operating nuclear reactor

International Nuclear Information System (INIS)

Ochiai, Kanehiro.

1976-01-01

Purpose: To provide a method of safely operating an nuclear reactor, comprising supporting a load applied to a reactor container partly with secondary container facilities thereby reducing the load borne by the reactor container when water is injected into the core to submerge the core in an emergency. Method: In a reactor emergency, water is injected into the reactor core thereby to submerge the core. Further, water is injected into a gap between the reactor container and the secondary container facilities. By the injection of water into the gap between the reactor container and the secondary container facilities a large apparent mass is applied to the reactor container, as a result of which the reactor container undergoes the same vibration as that of the secondary container facilities. Therefore, the load borne by the reactor container itself is reduced and stress at the bottom part of the reactor container is released. This permits the reactor to be operated more safely. (Moriyama, K.)

The Cloning and Functional Characterization of Peach CONSTANS and FLOWERING LOCUS T Homologous Genes PpCO and PpFT.

Directory of Open Access Journals (Sweden)

Xiang Zhang

Full Text Available Flowering is an essential stage of plant growth and development. The successful transition to flowering not only ensures the completion of plant life cycles, it also serves as the basis for the production of economically important seeds and fruits. CONSTANS (CO and FLOWERING LOCUS T (FT are two genes playing critical roles in flowering time control in Arabidopsis. Through homology-based cloning and rapid-amplifications of cDNA ends (RACE, we obtained full-lengths cDNA sequences of Prunus persica CO (PpCO and Prunus persica FT (PpFT from peach (Prunus persica (L. Batsch and investigated their functions in flowering time regulation. PpCO and PpFT showed high homologies to Arabidopsis CO and FT at DNA, mRNA and protein levels. We showed that PpCO and PpFT were nucleus-localized and both showed transcriptional activation activities in yeast cells, consistent with their potential roles as transcription activators. Moreover, we established that the over-expression of PpCO could restore the late flowering phenotype of the Arabidopsis co-2 mutant, and the late flowering defect of the Arabidopsis ft-1 mutant can be rescued by the over-expression of PpFT, suggesting functional conservations of CO and FT genes in peach and Arabidopsis. Our results suggest that PpCO and PpFT are homologous genes of CO and FT in peach and they may function in regulating plant flowering time.

EBR-2 [Experimental Breeder Reactor-2] test programs

International Nuclear Information System (INIS)

Sackett, J.I.; Lehto, W.K.; Lindsay, R.W.; Planchon, H.P.; Lambert, J.D.B.; Hill, D.J.

1990-01-01

The Experimental Breeder Reactor-2 (EBR-2) is a sodium cooled power reactor supplying about 20 MWe to the Idaho National Engineering Laboratory (INEL) grid and, in addition, is the key component in the development of the Integral Fast Reactor (IFR). EBR-2's testing capability is extensive and has seen four major phases: (1) demonstration of LMFBR power plant feasibility, (2) irradiation testing for fuel and material development, (3) testing the off-normal performance of fuel and plant systems and (4) operation as the IFR prototype, developing and demonstrating the IFR technology associated with fuel and plant design. Specific programs being carried out in support of the IFR include advanced fuels and materials development, advanced control system development, plant diagnostics development and component testing. This paper discusses EBR-2 as the IFR prototype and the associated testing programs. 29 refs

English L2 reading getting to the bottom

CERN Document Server

Birch, Barbara M

2014-01-01

English L2 Reading, Third Edition offers teachers research-based insights into bottom-up skills in reading English as a second language and a solid foundation on which to build reading instruction. Core linguistic and psycholinguistic concepts are presented within the context of their application to teaching. The goal is to balance or supplement (not replace) top-down approaches and methodologies with effective low-level options for teaching English reading. The text's pedagogical features- Questions, Study Guide Questions. Discussion Questions, Spotlight on Teaching sections- engage readers o

An integrated approach for increasing breeding efficiency in apple and peach in Europe

NARCIS (Netherlands)

Laurens, Francois; Aranzana, Maria José; Arus, Pere; Bassi, Daniele; Bink, Marco; Bonany, Joan; Caprera, Andrea; Corelli-Grappadelli, Luca; Costes, Evelyne; Durel, Charles Eric; Mauroux, Jehan Baptiste; Muranty, Hélène; Nazzicari, Nelson; Pascal, Thierry; Patocchi, Andrea; Peil, Andreas; Quilot-Turion, Bénédicte; Rossini, Laura; Stella, Alessandra; Troggio, Michela; Velasco, Riccardo; De Weg, Van Eric

2018-01-01

Despite the availability of whole genome sequences of apple and peach, there has been a considerable gap between genomics and breeding. To bridge the gap, the European Union funded the FruitBreedomics project (March 2011 to August 2015) involving 28 research institutes and private companies. Three

Effects of long-term consumption of high fructose corn syrup containing peach nectar on body weight gain in sprague dawley rats

Directory of Open Access Journals (Sweden)

Gulsah OZCAN SINIR

Full Text Available Abstract High fructose corn syrup (HFCS is one of the most used sweeteners in the food industry. Health concerns regarding the consumption of HFCS-containing foods have developed in parallel with the increasing amount of people who become overweight. This study was conducted to investigate whether HFCS-containing peach nectar (pn-HFCS consumption has more detrimental effects on anthropometrical and biochemical parameters compared with sucrose-containing peach nectar (pn-sucrose. Fifty-day-old Sprague Dawley rats were divided into three groups and were fed (A pn-HFCS + ad libitum chow, (B pn-sucrose + ad libitum chow and (C only ad libitum chow for 7 months. The percentage change in body weight (PCBW, body mass index (BMI, and Lee index were calculated, and serum triglyceride, glucose, insulin and leptin concentrations were measured. The PCBW, BMI, Lee index, serum triglyceride, glucose, insulin and leptin concentrations were insignificant among the three groups. We can suggest that peach nectar consumption resulted in more energy intake than the control and since pn-HFCS group consumed more chow than the pn-sucrose group. The results show that long term daily HFCS or sucrose consumption in peach nectar is not associated with weight gain and does not stimulate metabolic changes in Sprague Dawley rats.

Neutron flux measurements in PUSPATI Triga Reactor

International Nuclear Information System (INIS)

Gui Ah Auu; Mohamad Amin Sharifuldin Salleh; Mohamad Ali Sufi.

1983-01-01

Neutron flux measurement in the PUSPATI TRIGA Reactor (PTR) was initiated after its commissioning on 28 June 1982. Initial measured thermal neutron flux at the bottom of the rotary specimen rack (rotating) and in-core pneumatic terminus were 3.81E+11 n/cm 2 sec and 1.10E+12n/cm 2 sec respectively at 100KW. Work to complete the neutron flux data are still going on. The cadmium ratio, thermal and epithermal neutron flux are measured in the reactor core, rotary specimen rack, in-core pneumatic terminus and thermal column. Bare and Cadmium covered gold foils and wires are used for the above measurement. The activities of the irradiated gold foils and wires are determined using Ge(Li) and hyperpure germinium detectors. (author)

Evaluation of different doses of gamma radiation on physicochemical characteristics of peach Prunus persica (cv. Chimarrita) minimally processed

International Nuclear Information System (INIS)

Oliveira, Ana Claudia S.; Silva, Lucia C.A.S.; Perecin, Thalita Neme; Arthur, Valter; Harder, Marcia N.C.; Mansi, Debora N.; Canniatti-Brazaca, Solange G.

2009-01-01

The objective was to evaluate the effect of different doses of gamma radiation on the physico-chemical characteristics of peach Prunus persica (cv. Chimarrita) minimally processed, to increase the useful life of the fruit. The peaches were purchased at Ceasa of Campinas/SP and taken to the Laboratory of Radiobiology and Environment of CENA/USP (Piracicaba/SP), which were washed in tap water, peeled and cut into four pieces. The pieces of peach were dipped in sodium hypochlorite solution of 15 mL/L for 4 minutes and dry in a plastic support. Then it were placed in plastic containers (polypropylene). Subsequently, they were irradiated in a Cobalt-60 source, type Gammacell-220 (dose rate of 0,543 kGy/hour) with doses of: 0 (control), 1.0 and 2.0 kGy and stored at a temperature of 8 deg C. The experimental was developed entirely at random with 3 replicates for each treatment. For the statistic analysis was using the Tuckey test at 5% level of probability. Subsequently, analysis was carried out: color factors (l, a, b), pH, soluble solids (deg Brix), acidity and vitamin C. The tests were performed at 1, 3 and 6 days after irradiation. According to the results concluded that the analysis of color and acidity there was no significant difference between treatments, however, for the soluble solids (deg Brix), vitamin C and texture significant difference showing a decrease proportional to increasing doses of radiation and storage time. But the pH increased in relation to dose and during the analysis. (author)

Microbiological analysis of peach palm in natura submitted to {sup 60}Co radiation

Energy Technology Data Exchange (ETDEWEB)

Silva, Priscila V.; Araujo, Michel M.; Nunes, Thaise C.F.; Costa, Helbert S.F.; Villavicencio, Anna Lucia C.H. [Instituto de Pesquisas Energeticas e Nucleares (IPEN-CNEN/SP), Sao Paulo, SP (Brazil)], e-mail: priscilavsilva@gmail.com, e-mail: villavic@ipen.br; Hojeije, Khalil Y. [Floresta Industria e Comercio Ltda., Sao Paulo, SP (Brazil)

2009-07-01

The palm tree (Bactris gasipaes Kunth) is a species with high potential benefits, because of the nutritional value of its fruits that could be used both in human and animals feeding and mainly for peach palm extraction. It represents a great source of dietary fiber and a moderate source of magnesium and iron. Food irradiation is a worldwide technology that aims to improve the product quality, in order to eliminate diverse microorganisms that can spoil the food. Radiation processing, in the recommended doses, causes very few chemical alterations and nutritional losses in foods, being considered insignificant and/or similar to other food treatments. The objective of this study was to evaluate the effect of irradiation on microbiological counts of mesophilic aerobic in the peach palm in natura. Samples were irradiated with 1.0 and 1.5 kGy using a {sup 60}Co multipurpose irradiator. Radiation treatment appeared to be a useful alternative to reduce microbial contamination in the samples analyzed. (author)

Out-pile test of the capsule with cone shape bottom structures

Energy Technology Data Exchange (ETDEWEB)

Choi, M. H.; Kang, Y. H.; Cho, M. S.; Choo, K. N.; Kim, B. G.; Son, J. M.; Park, S. J.; Shin, Y. T.; Oh, J. M

2004-01-01

The design modification of bottom guide structures for the instrumented capsule which is used for the irradiation test in the research reactor, HANARO is done because of the cutting trouble of the bottom guide arm's pin. The previous structure of the 3-pin arm shape is changed into one body of the cone shape. The specimens of the bottom end cap ring with three different sizes ({phi}68mm, {phi}70mm, {phi}72mm) are designed and manufactured. The out-pile test for the capsule with previous 3-pin arm and new three bottom structures of the cone shape is performed using the one-channel flow test facilities. In order to estimate the compatibility with HANARO, the structural stability and integrity of the capsule, the out-pile test such as a loading/unloading test, a pressure drop test, a thermal performance test, a displacement measurement due to a vibration and an endurance test etc. is conducted, and the outer diameter of the bottom end cap ring to meet the HANARO requirements is selected. From out-pile test results the capsule with cone shape bottom structures is evaluated as to have the structural stability and the benefit from the fluid's flow respect. Also the size satisfied various requirements among three kinds of bottom end cap rings is 70mm in diameter. It is expected that the new bottom structures of the cone shape with 70mm in diameter will be applicable to all material and special capsules which will be designed and manufactured for the purpose of irradiation tests in the future.

Study on the viability of peach and apple pollen treated with gamma rays 60Co

International Nuclear Information System (INIS)

Filev, K.; Angelov, A.

1976-01-01

Pollen from Marygold peach and from Golden Delicious apple varieties was treated with gamma-rays at rates of 0.5, 1.5, 10.0, 50.0, 100, 200, 300, 400 and 500 kR, the irradiation intensity being 1350 r/min. Results point to a different influence of gamma-rays irradiation on the pollen germination. Apple pollen proved more radiosensitive. Least dose of o.5 kR exerted a stimulative effect in the pollen germination. As the irradiation dose rcse, the germination percentage declined. Doses of over 400 kR destroyed completely pollen viability in both fruit species. A linear semi-logarithmical dependence was ascertained between the irradiation rate and pollen germination. 5 and 10 kR proved most suitable for the purposes of the experimental mutagenesis at peach and apple pollen irradiation. (author)

Lining up device for the internal structures of a nuclear reactor vessel

International Nuclear Information System (INIS)

Silverblatt, B.L.

1977-01-01

The invention concerns a nuclear reactor of the type with a vessel, a vessel head carried at the top of this vessel by a core cylinder comprising a flange internally supported by the vessel, and an upper support structure supported between the core cylinder flange and the vessel head to align laterally the head, vessel, flange and support structure. A bottom key device is provided for lining up the flange, support structure and vessel, and an upper key device for laterally lining up support structure and the vessel head and for maintaining this alignment when they are removed simultaneously from the core cylinder and vessel. When re-assembling the reactor, the top support structure and the vessel head are lowered simultaneously so that an opening in the top alignment structure engages in the upper extension of the bottom alignment structure. A plurality of alignment stuctures may be utilised round the circumference of the reactor vessel. The disposition of the invention also facilitates the removal of the core cylinder from the reactor vessel. In this way, the alignment on re-assembly is ensured by the re-entry of the bottom extension under the flange of the core cylinder with the groove or keyway of the reactor vessel [fr

Safety equipment in a reactor

International Nuclear Information System (INIS)

Shiratori, Hirozo; Ishiyama, Satoshi; Ugawa, Yukio.

1976-01-01

Object: To safely retain, even if fuel should be molten and flown through the bottom of a container in a reactor, the molten fuel to remove heat generation of the fuel to prevent occurrence of a critical trouble. Structure: A reactor container housing a core and coolant has thereunder a separation dome in a central portion thereof and a partitioning plate coaxially and circularly disposed in the periphery of the separation dome, with a tray formed of magnesium oxide being disposed. Further, a cooling path system is provided so as to surround the tray. The cooling path system and the reactor container are surrounded and protected by a reactor wall provided with heat insulating refractory bricks, a coolant pouring system extends through the reactor wall, and the coolant is supplied to the tray. (Furukawa, Y.)

LIGHT WATER MODERATED NEUTRONIC REACTOR

Science.gov (United States)

Christy, R.F.; Weinberg, A.M.

1957-09-17

A uranium fuel reactor designed to utilize light water as a moderator is described. The reactor core is in a tank at the bottom of a substantially cylindrical cross-section pit, the core being supported by an apertured grid member and comprised of hexagonal tubes each containing a pluralily of fuel rods held in a geometrical arrangement between end caps of the tubes. The end caps are apertured to permit passage of the coolant water through the tubes and the fuel elements are aluminum clad to prevent corrosion. The tubes are hexagonally arranged in the center of the tank providing an amulus between the core and tank wall which is filled with water to serve as a reflector. In use, the entire pit and tank are filled with water in which is circulated during operation by coming in at the bottom of the tank, passing upwardly through the grid member and fuel tubes and carried off near the top of the pit, thereby picking up the heat generated by the fuel elements during the fission thereof. With this particular design the light water coolant can also be used as the moderator when the uranium is enriched by fissionable isotope to an abundance of U/sup 235/ between 0.78% and 2%.

Top-down versus bottom-up processing of influence diagrams in probabilistic analysis

International Nuclear Information System (INIS)

Timmerman, R.D.; Burns, T.J.; Dodds, H.L. Jr.

1986-01-01

Recent work by Phillips and Selby has shown that influence diagram methodology can be a useful analytical tool in reactor safety studies. In some instances an influence diagram can be used as a graphical representation of probabilistic dependence within a system or event sequence. Under these circumstances, Bayesian statistics is employed to transform the relationships depicted in the influence diagram into the correct expression for a desired marginal probability (e.g. the top node). Top-down and bottom-up algorithms have emerged as the dominant methods for quantifying influence diagrams. The purpose of this paper is to demonstrate a potential error in employing the bottom-up algorithm when dealing with interdependencies

[Effect of supplementation with peach palm as source of vitamin A: study with rats].

Science.gov (United States)

Yuyama, L K; Cozzolino, S M

1996-02-01

The effect of supplementation with peach palm (Bactris gasipaes H.B.K.), as an alternative source of vit. A, in the regional diet of Manaus, AM, Brazil, in which the pulp was cooked and transformed into flour, was studied. The biological trial involved rats which were depleted in zinc and vitamin A, followed by repletion using the regional diet (RD), RD plus peach palm and RD plus vitamin A. The parameters used to determine the utilization of vitamin A were the vitamin A concentrations in the liver and plasma, and the growth of the animals. The diet was prepared according to the data of Shrimpton and Giugliano for families earning less than two legal minimum salaries. Adult post-partum rats were used, with six male pups each, which received a diet based on casein washed with 1% EDTA, without the addition of zinc or vitamin A for a period of 25 days, for the purpose of obtaining newly-weaned animals which were deficient in Zn and Vit.A. A control group received a diet also based on casein washed with 1% EDTA, but with all the nutrients in the quantities suggested by the Committee on Laboratory Animal Diets. The repletion period of the newly-weaned rats was of 30 days and the experimental design was entirely randomized with four groups of eight rats each. The diet supplementation followed the recommendations of the Committee on Laboratory Animal Diets. At the end of the experiment, it was observed that rats which consumed the diet based on the regional diet of Manaus supplemented with either peach palm or vitamin A showed a significantly greater concentration of vitamin A in the liver, 43.3 +/- 6.5 micrograms/g, 42.0 +/- 4.3 micrograms/g, respectively in relation to the regional diet, 5.5 +/- 1.1 micrograms/g (p < 0.05). The amount of zinc present in the regional diet, 10.7 mg per day, was bioavailable as determined by the concentration of zinc in the femurs. The results suggest that the regional diet of Manaus needs to be supplemented with vitamin A to maintain the

BR2 Reactor: Irradiation of fuels

International Nuclear Information System (INIS)

Verwimp, A.

2005-01-01

Safe, reliable and economical operation of reactor fuels, both UO 2 and MOX types, requires in-pile testing and qualification up to high target burn-up levels. In-pile testing of advanced fuels for improved performance is also mandatory. The objectives of research performed at SCK-CEN are to perform Neutron irradiation of LWR (Light Water Reactor) fuels in the BR2 reactor under relevant operating and monitoring conditions, as specified by the experimenter's requirements and to improve the on-line measurements on the fuel rods themselves

Formulation of a peach ice cream as potential symbiotic food

OpenAIRE

VILLALVA, Fernando Josué; CRAVERO BRUNERI, Andrea Paula; VINDEROLA, Gabriel; GONÇALVEZ DE OLIVEIRA, Enzo; PAZ, Noelia Fernanda; RAMÓN, Adriana Noemí

2017-01-01

Abstract Today’s population increasingly demands and consumes healthy products. For this reason, the food industry has been developing and marketing food with added bioactive components. The aim of this work was to formulate a peach ice cream reduced in calories with an added probiotic (Bifidobacterium lactis Bb-12) and prebiotics (inulin), and to evaluate its sensory quality and acceptability as potential symbiotic food. The moisture content was 76.47%; 7.14% protein; 0.15% fat; 6.37%; carbo...

Nutrient critical levels and availability in soils cultivated with peach palm (Bactris gasipaes Kunth. in Santo Domingo de Los Tsáchilas, Ecuador

Directory of Open Access Journals (Sweden)

Carlos Julio Quezada Crespo

2017-04-01

Full Text Available Ecuador is the most important exporter of canned peach palm, however, to date ideal soil fertility characteristics for peach palm growers remain unknown. The aim of this research was to determine optimal levels of soil nutrients for the cultivation of peach palm, specifically with regards to soil cation exchange capacity in order to obtain higher yields. We worked with 20 farmsteads and their soils from the province of Santo Domingo de los Tsáchilas during the second half of 2014. Fields were evaluated based on a relative yield and extractable (modified Olsen nutrient contents in each soil were determined using regression modeling to determine critical levels of each nutrient and specifically to determine the ideal soil cation exchange capacity under peach palm cultivation. Our analysis established critical levels of soil pH (6.3; OM 6.5%; P 12.3 mg.dm-3; K 0.67 cmol.dm-3 K; Ca 5.1 cmol.dm-3 ; Mg 0.97 cmol.dm-3; and S 7.5 mg.dm-3. The ideal Ca: Mg: K soil cation exchange capacity was determined to be 76:14:10.

BWR fuel assembly bottom nozzle with one-way coolant flow valve

International Nuclear Information System (INIS)

Taleyarkhan, R.P.

1987-01-01

In a nuclear reactor having a flow of coolant/moderator fluid therein, at least one fuel assembly installed in the fluid flow, the fuel assembly is described comprising in combination: a bundle of elongated fuel rods disposed in side-by-side relationship so as to form an array of spaced fuel rods; an outer tubular flow channel surrounding the fuel rods so as to direct the flow of coolant/moderator fluid along the fuel rods; bottom and top nozzles mounted at opposite ends of the flow channel and having an inlet and outlet respectively for allowing entry and exit of the flow of coolant/moderator fluid into and from the flow channel and along the fuel rods therein; and a coolant flow direction control device operatively disposed in the bottom nozzle so as to open the inlet thereof to the flow of coolant/moderator fluid in an inflow direction into the flow channel through the bottom nozzle inlet but close the inlet to the flow of coolant/moderator fluid from the flow channel through the bottom nozzle inlet upon reversal of coolant/moderator fluid flow from the inflow direction

Eddy current testing system for bottom mounted instrumentation welds

Directory of Open Access Journals (Sweden)

Kobayashi Noriyasu

2015-01-01

Full Text Available The capability of eddy current testing (ECT for the bottom mounted instrumentation (BMI weld area of reactor vessel in a pressurized water reactor was demonstrated by the developed ECT system and procedure. It is difficult to position and move the probe on the BMI weld area because the area has complexly curved surfaces. The space coordinates and the normal vectors at the scanning points were calculated as the scanning trajectory of probe based on the measured results of surface shape on the BMI mock-up. The multi-axis robot was used to move the probe on the mock-up. Each motion-axis position of the robot corresponding to each scanning point was calculated by the inverse kinematic algorithm. In the mock-up test, the probe was properly contacted with most of the weld surfaces. The artificial stress corrosion cracking of approximately 6 mm in length and the electrical-discharge machining slit of 0.5 mm in length, 1 mm in depth and 0.2 mm in width given on the weld surface were detected. From the probe output voltage, it was estimated that the average probe tilt angle on the surface under scanning was 2.6°.

Response of Green Peach Aphids and Other Arthropods to Garlic Intercropped with Tobacco

NARCIS (Netherlands)

Lai, R.; You, M.; Lotz, L.A.P.; Vasseur, L.

2011-01-01

The green peach aphid, Myzus persicae (Sulzer), is an insect pest that causes extensive damage to tobacco (Nicotiana tabacum L.) in China. Field trials were conducted in 2008 and 2009 at Longyan in the Fujian Province (China) to evaluate the effects of garlic (Allium sativum L.) as a deterrent to

Phytoplasmas in apricot, peach and sour cherry orchards in East Bohemia, Czech Republic

Czech Academy of Sciences Publication Activity Database

Ludvíková, H.; Fránová, Jana; Suchá, J.

2011-01-01

Roč. 64, Suppl. (2011), s. 67-68 ISSN 1721-8861 R&D Projects: GA MŠk OC09021 Institutional research plan: CEZ:AV0Z50510513 Keywords : Candidatus Phytoplasma prunorum * PCR/RFLP * apricot, peach and sour cherry orchards Subject RIV: EE - Microbiology, Virology Impact factor: 0.592, year: 2011

A bulk segregant gene expression analysis of a peach population reveals components of the underlying mechanism of the fruit cold response.

Directory of Open Access Journals (Sweden)

Clara Pons

Full Text Available Peach fruits subjected for long periods of cold storage are primed to develop chilling injury once fruits are shelf ripened at room temperature. Very little is known about the molecular changes occurring in fruits during cold exposure. To get some insight into this process a transcript profiling analyses was performed on fruits from a PopDG population segregating for chilling injury CI responses. A bulked segregant gene expression analysis based on groups of fruits showing extreme CI responses indicated that the transcriptome of peach fruits was modified already during cold storage consistently with eventual CI development. Most peach cold-responsive genes have orthologs in Arabidopsis that participate in cold acclimation and other stresses responses, while some of them showed expression patterns that differs in fruits according to their susceptibility to develop mealiness. Members of ICE1, CBF1/3 and HOS9 regulons seem to have a prominent role in differential cold responses between low and high sensitive fruits. In high sensitive fruits, an alternative cold response program is detected. This program is probably associated with dehydration/osmotic stress and regulated by ABA, auxins and ethylene. In addition, the observation that tolerant siblings showed a series of genes encoding for stress protective activities with higher expression both at harvest and during cold treatment, suggests that preprogrammed mechanisms could shape fruit ability to tolerate postharvest cold-induced stress. A number of genes differentially expressed were validated and extended to individual genotypes by medium-throughput RT-qPCR. Analyses presented here provide a global view of the responses of peach fruits to cold storage and highlights new peach genes that probably play important roles in the tolerance/sensitivity to cold storage. Our results provide a roadmap for further experiments and would help to develop new postharvest protocols and gene directed breeding

A bulk segregant gene expression analysis of a peach population reveals components of the underlying mechanism of the fruit cold response.

Science.gov (United States)

Pons, Clara; Martí, Cristina; Forment, Javier; Crisosto, Carlos H; Dandekar, Abhaya M; Granell, Antonio

2014-01-01

Peach fruits subjected for long periods of cold storage are primed to develop chilling injury once fruits are shelf ripened at room temperature. Very little is known about the molecular changes occurring in fruits during cold exposure. To get some insight into this process a transcript profiling analyses was performed on fruits from a PopDG population segregating for chilling injury CI responses. A bulked segregant gene expression analysis based on groups of fruits showing extreme CI responses indicated that the transcriptome of peach fruits was modified already during cold storage consistently with eventual CI development. Most peach cold-responsive genes have orthologs in Arabidopsis that participate in cold acclimation and other stresses responses, while some of them showed expression patterns that differs in fruits according to their susceptibility to develop mealiness. Members of ICE1, CBF1/3 and HOS9 regulons seem to have a prominent role in differential cold responses between low and high sensitive fruits. In high sensitive fruits, an alternative cold response program is detected. This program is probably associated with dehydration/osmotic stress and regulated by ABA, auxins and ethylene. In addition, the observation that tolerant siblings showed a series of genes encoding for stress protective activities with higher expression both at harvest and during cold treatment, suggests that preprogrammed mechanisms could shape fruit ability to tolerate postharvest cold-induced stress. A number of genes differentially expressed were validated and extended to individual genotypes by medium-throughput RT-qPCR. Analyses presented here provide a global view of the responses of peach fruits to cold storage and highlights new peach genes that probably play important roles in the tolerance/sensitivity to cold storage. Our results provide a roadmap for further experiments and would help to develop new postharvest protocols and gene directed breeding strategies to better

Assessment of extent and degree of thermal damage to polymeric materials in the Three Mile Island Unit 2 reactor building

International Nuclear Information System (INIS)

Alvares, N.J.

1986-01-01

This paper describes assumptions and procedures used to perform thermal damage analysis caused by post loss-of-coolant-accident (LOCA) hydrogen deflagration at Three Mile Island Unit 2 Reactor. Examination of available photographic evidence yields data on the extent and range of thermal and burn damage. Thermal damage to susceptible material in accessible regions of the reactor building was distributed in non-uniform patterns. No clear explanation for non-uniformity was found in examined evidence, e.g., burned materials were adjacent to materials that appear similar but were not burned. Because these items were in proximity to vertical openings that extend the height of the reactor building, the authors assume the unburned materials preferentially absorbed water vapor during periods of high, local steam concentration. A control pendant from the polar crane located in the top of the reactor building sustained asymmetric burn damage of decreasing degree from top to bottom. Evidence suggests the polar-crane pendant side that experienced heaviest damage was exposed to intense radiant energy from a transient fire plume in the reactor containment volume. Simple hydrogen-fire-exposure tests and heat transfer calculations approximate the degree of damage found on inspected materials from the containment building and support for an estimated 8% pre-fire hydrogen

Assessment of extent and degree of thermal damage to polymeric materials in the Three Mile Island Unit 2 Reactor building

International Nuclear Information System (INIS)

Alvares, N.J.

1985-06-01

This paper describes assumptions and procedures used to perform thermal damage analysis caused by post loss-of-coolant-accident (LOCA) hydrogen deflagration at Three Mile Island Unit 2 Reactor. Examination of available photographic evidence yields data on the extent and range of thermal and burn damage. Thermal damage to susceptible material in accessible regions of the reactor building was distributed in non-uniform patterns. No clear explanation for non-uniformity was found in examined evidence, e.g., burned materials were adjacent to materials that appear similar but were not burned. Because these items were in proximity to vertical openings that extend the height of the reactor building, we assume the unburned materials preferentially absorbed water vapor during periods of high, local steam concentration. A control pendant from the polar crane located in the top of the reactor building sustained asymmetric burn damage of decreasing degree from top to bottom. Evidence suggests the polar-crane pendant side that experienced heaviest damage was exposed to intense radiant energy from a transient fire plume in the reactor containment volume. Simple hydrogen-fire-exposure tests and heat transfer calculations approximate the degree of damage found on inspected materials from the containment building and support for an estimated 8% pre-fire hydrogen

Comparison of the genetic determinism of two key phenological traits, flowering and maturity dates, in three Prunus species: peach, apricot and sweet cherry.

Science.gov (United States)

Dirlewanger, E; Quero-García, J; Le Dantec, L; Lambert, P; Ruiz, D; Dondini, L; Illa, E; Quilot-Turion, B; Audergon, J-M; Tartarini, S; Letourmy, P; Arús, P

2012-11-01

The present study investigates the genetic determinism of flowering and maturity dates, two traits highly affected by global climate change. Flowering and maturity dates were evaluated on five progenies from three Prunus species, peach, apricot and sweet cherry, during 3-8 years. Quantitative trait locus (QTL) detection was performed separately for each year and also by integrating data from all years together. High heritability estimates were obtained for flowering and maturity dates. Several QTLs for flowering and maturity dates were highly stable, detected each year of evaluation, suggesting that they were not affected by climatic variations. For flowering date, major QTLs were detected on linkage groups (LG) 4 for apricot and sweet cherry and on LG6 for peach. QTLs were identified on LG2, LG3, LG4 and LG7 for the three species. For maturity date, a major QTL was detected on LG4 in the three species. Using the peach genome sequence data, candidate genes underlying the major QTLs on LG4 and LG6 were investigated and key genes were identified. Our results provide a basis for the identification of genes involved in flowering and maturity dates that could be used to develop cultivar ideotypes adapted to future climatic conditions.

Reactor Core Coolability Analysis during Hypothesized Severe Accidents of OPR1000

International Nuclear Information System (INIS)

Lee, Yongjae; Seo, Seungwon; Kim, Sung Joong; Ha, Kwang Soon; Kim, Hwan-Yeol

2014-01-01

Assessment of the safety features over the hypothesized severe accidents may be performed experimentally or numerically. Due to the considerable time and expenditures, experimental assessment is implemented only to the limited cases. Therefore numerical assessment has played a major role in revisiting severe accident analysis of the existing or newly designed power plants. Computer codes for the numerical analysis of severe accidents are categorized as the fast running integral code and detailed code. Fast running integral codes are characterized by a well-balanced combination of detailed and simplified models for the simulation of the relevant phenomena within an NPP in the case of a severe accident. MAAP, MELCOR and ASTEC belong to the examples of fast running integral codes. Detailed code is to model as far as possible all relevant phenomena in detail by mechanistic models. The examples of detailed code is SCDAP/RELAP5. Using the MELCOR, Carbajo. investigated sensitivity studies of Station Black Out (SBO) using the MELCOR for Peach Bottom BWR. Park et al. conduct regulatory research of the PWR severe accident. Ahn et al. research sensitivity analysis of the severe accident for APR1400 with MELCOR 1.8.4. Lee et al. investigated RCS depressurization strategy and developed a core coolability map for independent scenarios of Small Break Loss-of-Coolant Accident (SBLOCA), SBO, and Total Loss of Feed Water (TLOFW). In this study, three initiating cases were selected, which are SBLOCA without SI, SBO, and TLOFW. The initiating cases exhibit the highest probability of transitioning into core damage according to PSA 1 of OPR 1000. The objective of this study is to investigate the reactor core coolability during hypothesized severe accidents of OPR1000. As a representative indicator, we have employed Jakob number and developed JaCET and JaMCT using the MELCOR simulation. Although the RCS pressures for the respective accident scenarios were different, the JaMCT and Ja

Control of Grapholita molesta (Busck, 1916) (Lepidoptera: Tortricidae) with entomopathogenic nematodes (Rhabditida: Heterorhabditidae, Steinernematidae) in peach orchards.

Science.gov (United States)

de Carvalho Barbosa Negrisoli, Carla Ruth; Negrisoli, Aldomario Santo; Garcia, Mauro Silveira; Dolinski, Claudia; Bernardi, Daniel

2013-10-01

Oriental fruit moth Grapholita molesta (Busck, 1916) (Lepidoptera: Tortricidae) is considered a major pest in temperate fruit trees, such as peach and apple. Entomopathogenic nematodes (EPNs) are regarded as viable for pest management control due to their efficiency against tortricid in these trees. The objective of this study was to evaluate the effectiveness of native EPNs from Rio Grande do Sul state against pre-pupae of G. molesta under laboratory and field conditions. In the laboratory, pre-pupae of G. molesta were placed in corrugated cardboard sheets inside glass tubes and exposed to 17 different EPNs strains at concentrations of 6, 12, 24, 48 and 60 IJs/cm(2) and maintained at 25 °C, 70 ± 10% RH and photophase of 16 h. Insect mortality was recorded 72 h after inoculation of EPNs. Steinernema rarum RS69 and Heterorhabditis bacteriophora RS33 were the most virulent strains and selected for field application (LC95 of 70.5 and 53.8 IJs/cm(2), respectively). Both strains were highly efficient under field conditions when applied in aqueous suspension directed to larvae on peach tree trunk, causing mortality of 94 and 97.0%, respectively. Copyright © 2013 Elsevier Inc. All rights reserved.

Optimal operating parameters of the reactor oscillator in the channel of 6.5/10 MW reactor; Odredjivanje optimalnih radnih tacaka za reaktorski oscilator u kanalu na reaktoru 6,5/10 MW

Energy Technology Data Exchange (ETDEWEB)

Lolic, B; Zecevic, V [The Institute of Nuclear Sciences Boris Kidric, Vinca, Beograd (Yugoslavia)

1961-07-01

Operating conditions for the reactor oscillator in the central vertical experimental channel (VK5) in the RA reactor were studied during 1960. Channel VK5 was chosen because the sensitivity of the reactor is highest in this case. The central vertical experimental channel is placed in the center of the core and its bottom is placed 200 mm from the bottom of the reactor core. Diameter of the channel is is 110 mm and its length 5706 mm. During operation of the reactor oscillator with total modulation of the reactor power, it is very important to determine the oscillator operating point and the oscillation amplitude in such a way to avoid any change in reactor power level. Positive reactivity changes originating from oscillations of the samples should be compensated by the negative reactivity changes so that the effect should be nil. Operating points of the reactor oscillator are in the middle of the straight part of the figure showing the reactivity change dependent on the position of the absorber.

Classification and Discrimination of Different Fungal Diseases of Three Infection Levels on Peaches Using Hyperspectral Reflectance Imaging Analysis

Directory of Open Access Journals (Sweden)

Ye Sun

2018-04-01

Full Text Available Peaches are susceptible to infection from several postharvest diseases. In order to control disease and avoid potential health risks, it is important to identify suitable treatments for each disease type. In this study, the spectral and imaging information from hyperspectral reflectance (400~1000 nm was used to evaluate and classify three kinds of common peach disease. To reduce the large dimensionality of the hyperspectral imaging, principal component analysis (PCA was applied to analyse each wavelength image as a whole, and the first principal component was selected to extract the imaging features. A total of 54 parameters were extracted as imaging features for one sample. Three decayed stages (slight, moderate and severe decayed peaches were considered for classification by deep belief network (DBN and partial least squares discriminant analysis (PLSDA in this study. The results showed that the DBN model has better classification results than the classification accuracy of the PLSDA model. The DBN model based on integrated information (494 features showed the highest classification results for the three diseases, with accuracies of 82.5%, 92.5%, and 100% for slightly-decayed, moderately-decayed and severely-decayed samples, respectively. The successive projections algorithm (SPA was used to select the optimal features from the integrated information; then, six optimal features were selected from a total of 494 features to establish the simple model. The SPA-PLSDA model showed better results which were more feasible for industrial application. The results showed that the hyperspectral reflectance imaging technique is feasible for detecting different kinds of diseased peaches, especially at the moderately- and severely-decayed levels.

Carbohydrate metabolism of vegetative and reproductive sinks in the late-maturing peach cultivar 'Encore'

Science.gov (United States)

Riccardo Lo Bianco; Mark Rieger; Shi-Jean S. Sung

1999-01-01

Activities of NAD+-dependent sorbitol dehydrogenase (SDH), sorbitol oxidase (SOX), sucrose synthase (SS), acid invertase (AI), and neutral invertase (NI) in ?Encore? peach (Prunus persica L.) fruits and developing shoot tips were assayed during the growing season to determine whether carbohydrate metabolizing enzymes could...

Ageing management of the BR2 research reactor

International Nuclear Information System (INIS)

Verpoortem, J. R.; Van Dyck, S.

2014-01-01

At the Belgian nuclear research centre (SCK.CEN) several test reactors are operated. Among these, Belgian Reactor 2 (BR2) is the largest Material Test Reactor (MTR). This water-cooled, beryllium moderated reactor with a maximum thermal power of 100 MW became operational in 1962. Except for two major refurbishment campaigns of one year each, this reactor has been operated continuously over the past 50 years, with a frequency of 5-12 cycles per year. At present, BR2 is used for different research activities, the production of medical isotopes, the production of n-doped silicon and various training and education activities. (Author)

Screening Quality Evaluation Factors of Freeze-Dried Peach (Prunus Persica L. Batsch Powders from Different Ripening Time Cultivars

Directory of Open Access Journals (Sweden)

Chun-ju Liu

2017-01-01

Full Text Available The quality evaluation of processed products is complex. To simplify the quality evaluation process and improve the efficiency, fourteen evaluation factors of freeze-dried powders of seventeen cultivars of peach at different ripening times were analyzed. The most important evaluation indicators and criteria were obtained by analysis of variance (ANOVA, correlation analysis (CA, principal component analysis (PCA, system cluster analysis (SCA, and analytic hierarchy process (AHP. Results showed that the peach powders had the significant differences in quality (P<0.05, and some processing factors were related with some physicochemical and nutritional factors. Five principle components were extracted by PCA and the cumulative contribution achieved was 84.46%. Through the score plot of the first two principal components, a clear differentiation among ripening times was found and three distinct groups were separated according to ripening time. Five characteristic factors were obtained as titratable acid, browning index, hemicellulose, hygroscopicity, and vitamin C by SCA. Their weights of 0.1249, 0.3007, 0.0514, 0.4916, and 0.0315 were obtained by AHP, respectively. The peach cultivars were divided into four evaluation grades by the comprehensive quality score.

An analytical evaluation for the pressure drop characteristics of bottom nozzle flow holes

International Nuclear Information System (INIS)

Yang, S. G.; Kim, H. J.; Lim, H. T.; Park, E. J.; Jeon, K. L.

2002-01-01

An analytical evaluation for the bottom nozzle flow holes was performed to find a best design concept in terms of pressure drop. For this analysis, Computational Fluid Dynamics (CFD), FLUENT 5.5, code was selected as an analytical evaluation tool. The applicability of CFD code was verified by benchmarking study with Vibration Investigation of Small-scale Test Assemblies (VISTA) test data in several flow conditions and typical flow hole shape. From this verification, the analytical data were benchmarked roughly within 17% to the VISTA test data. And, overall trend under various flow conditions looked very similar between both cases. Based on the evaluated results using CFD code, it is concluded that the deburring and multiple chamfer hole features at leading edge are the excellent design concept to decrease pressure drop across bottom nozzle plate. The deburring and multiple chamfer hole features at leading edge on the bottom nozzle plate have 12% and 17% pressure drop benefit against a single chamfer hole feature on the bottom nozzle plate, respectively. These design features are meaningful and applicable as a low pressure drop design concept of bottom nozzle for Pressurized Water Reactor (PWR) fuel assembly

Disruption of Ethylene Responses by Turnip mosaic virus Mediates Suppression of Plant Defense against the Green Peach Aphid Vector.

Science.gov (United States)

Casteel, Clare L; De Alwis, Manori; Bak, Aurélie; Dong, Haili; Whitham, Steven A; Jander, Georg

2015-09-01

Plants employ diverse responses mediated by phytohormones to defend themselves against pathogens and herbivores. Adapted pathogens and herbivores often manipulate these responses to their benefit. Previously, we demonstrated that Turnip mosaic virus (TuMV) infection suppresses callose deposition, an important plant defense induced in response to feeding by its aphid vector, the green peach aphid (Myzus persicae), and increases aphid fecundity compared with uninfected control plants. Further, we determined that production of a single TuMV protein, Nuclear Inclusion a-Protease (NIa-Pro) domain, was responsible for changes in host plant physiology and increased green peach aphid reproduction. To characterize the underlying molecular mechanisms of this phenomenon, we examined the role of three phytohormone signaling pathways, jasmonic acid, salicylic acid, and ethylene (ET), in TuMV-infected Arabidopsis (Arabidopsis thaliana), with or without aphid herbivory. Experiments with Arabidopsis mutants ethylene insensitive2 and ethylene response1, and chemical inhibitors of ET synthesis and perception (aminoethoxyvinyl-glycine and 1-methylcyclopropene, respectively), show that the ET signaling pathway is required for TuMV-mediated suppression of Arabidopsis resistance to the green peach aphid. Additionally, transgenic expression of NIa-Pro in Arabidopsis alters ET responses and suppresses aphid-induced callose formation in an ET-dependent manner. Thus, disruption of ET responses in plants is an additional function of NIa-Pro, a highly conserved potyvirus protein. Virus-induced changes in ET responses may mediate vector-plant interactions more broadly and thus represent a conserved mechanism for increasing transmission by insect vectors across generations. © 2015 American Society of Plant Biologists. All Rights Reserved.

Water experiments on thermal striping in reactor vessel of advanced sodium-cooled fast reactor. Influence of flow collector of backup CR guide tube

International Nuclear Information System (INIS)

Kobayashi, Jun; Ezure, Toshiki; Tanaka, Masaaki; Kamide, Hideki

2016-01-01

Design study of an advanced large-scale sodium-cooled fast reactor (SFR) has been conducted in JAEA. In the region between the bottom of the Upper Internal Structure (UIS) and the core outlet, the hot sodium from the fuel subassembly mixes with the cold sodium from the neighbor control rod (CR) channel. Therefore, temperature fluctuation due to mixing fluids at different temperatures may cause high cycle thermal fatigue at the bottom of the UIS. In the advanced design, installation of a flow guide structure named Flow-Collector (FC) to the backup control rod (BCR) guide tube is considered to enhance reliable operation of self-actuated shutdown system (SASS) and to ensure reactor shutdown operation. Previously, water experiments without the FC model had been examined in JAEA to investigate effective countermeasures to the significant temperature fluctuation generation at the bottom of the UIS. Since the FC may affect the thermal mixing behavior at the bottom of the UIS, influence of the FC on characteristics of the temperature fluctuation around the BCR channels was investigated using a water experimental facility with structure model of the FC. Through the experiment, small influence of the FC on the temperature fluctuation distribution at the bottom of the UIS was indicated. (author)

Report of the Committee on the Survey of Hull Bottom of Nuclear Ship Mutsu

International Nuclear Information System (INIS)

1979-01-01

The nuclear ship Mutsu arrived the Sasebo Shipyard, Sasebo Heavy Industries Co., Ltd., in October, 1978, to repair the shielding for the reactor and to inspect generally the safety. The docking works were not carried out since 1972 for the Mutsu, therefore it was decided to admit the Mutsu in a dock to put the hull in order. To prepare for starting the output test again, it is necessary to grasp the state of the hull part below water line and take appropriate measures as occasions demand, therefore the Japan Nuclear Ship Development Agency established the Committee on the Survey of Hull Bottom of Nuclear Ship Mutsu in July, 1979. Three meetings of the committee were held from July 2 to September 19, and the draft of the report was drawn up. The Mutsu entered No. 5 dock of the Sasebo Shipyard on July 9, and left on July 23, and the survey of the hull bottom was carried out during that period. The results of the survey are reported as follows: the state of bottom shell plates, the state of aft part and the propeller, the state of sea chests, the state of the electrical corrosion protection of bottom shell plates and the state of sea valves. The problem to be specially mentioned was not found, and it was recognized that the sound maintenance has been carried out. (Kako, I.)

DNA-based identification of Armillaria isolates from peach orchards in Mexico state

Science.gov (United States)

Ruben Damian Elias Roman; Ned B. Klopfenstein; Dionicio Alvarado Rosales; Mee-Sook Kim; Anna E. Case; Sara M. Ashiglar; John W. Hanna; Amy L. Ross-Davis; Remigio A. Guzman Plazola

2012-01-01

A collaborative project between the Programa de Fitopatología, Colegio de Postgraduados, Texcoco, Estado de Mexico and the USDA Forest Service - RMRS, Moscow Forest Pathology Laboratory has begun this year (2011) to assess which species of Armillaria are causing widespread and severe damage to the peach orchards from México state, Mexico. We are employing a DNA-based...

Reconstitutable fuel assembly for a nuclear reactor

International Nuclear Information System (INIS)

Ferlan, S.J.; Kmonk, S.; Schallenberger, J.M.

1982-01-01

A reconstitutable fuel assembly for a nuclear reactor which includes a mechanical, rather than metallurgical, arrangement for connecting control rod guide thimbles to the top and bottom nozzles of a fuel assembly. Multiple sleeves enclosing control rod guide thimbles interconnect the top nozzle to the fuel assembly upper grid. Each sleeve is secured to the top nozzle by retaining rings disposed on opposite sides of the nozzle. Similar sleeves enclose the lower end of control rod guide thimbles and interconnect the bottom nozzle with the lowermost grid on the assembly. An end plug fitted in the bottom end of each sleeve extends through the bottom nozzle and is secured thereto by a retaining ring. Should it be necessary to remove a fuel rod from the assembly, the retaining rings in either the top or bottom nozzles may be removed to release the nozzle from the control rod guide thimbles and thus expose either the top or bottom ends of the fuel rods to fuel rod removing mechanisms

A water inner circulation device for a reactor vessel

International Nuclear Information System (INIS)

Eriksson, O.

1976-01-01

A water inner circulation device for a reactor vessel comprising a pump mounted in the reactor vessel and driven by a water-cooled electric motor mounted in a housing outside the reactor vessel, the shaft of the pump passing through the reactor-vessel bottom and being coupled to the motor shaft in a member mechanically connected to the bottom of the reactor vessel in the vicinity of the motor housing, the pump shaft being surrounded by a resilient sealing ring, the reactor vessel communicating with the cooling channels of the pump, when the latter is operating, via a slot surrounding the pump hollow cylindrical shaft, characterized in that the slot inner end is used for/forming a circular space surrounding the pump shaft and surrounded by the motorhousing, in which is coaxially mounted a separating cylindral wall, the upper edge of which is tightly applied against the inner wall of the motor-housing to which it is fastened vertically, the inner surface of said wall being turned towards the outer surface of a circular packing-box, the outer surface of said separating wall constituting a separating radical inner surface for a circular chamber through which flow the motor cooling water. (author)

Distribution of the root system of peach palm under drip irrigation

Directory of Open Access Journals (Sweden)

Adriano da Silva Lopes

2014-07-01

Full Text Available The incorporation of technologies has resulted in increased productivity and the more rational management of peach palm, with irrigation being an important tool for certain regions. Thus, studies leading to proper crop management are extremely important, such as the estimate of the effective depth of the root system, which is indispensable for proper irrigation management. The objective of this study was to evaluate the effects of different irrigation depths, as applied by drip irrigation, on the distribution of the root system of peach palm. This experiment was conducted in Ilha Solteira, São Paulo State, Brazil, with drip irrigation, with the two systems (flow of 0.0023 m3 h-1 consisting of four irrigation treatments corresponding to 0, 50, 100 and 150% of Class ‘A’ pan evaporation. After five years, an analysis of the Bactris gasipaes root system was performed at a distance of 0.0, 0.5 and 1.0 meters from the trunk, collecting sampling at two depths (0.0 to 0.3 m and 0.3 to 0.6 m via the auger method (volumetric analysis. We concluded that the effective depth of the root system used for irrigation management should be a maximum of 0.3 meters.

Chitin enhances biocontrol of Rhodotorula mucilaginosa to postharvest decay of peaches.

Science.gov (United States)

Zhang, Hongyin; Yang, Qiya; Ge, Lingling; Zhang, Guochao; Zhang, Xiaoli; Zhang, Xiaoyun

2016-07-01

Biological control using microbial antagonists is a promising alternative approach to synthetic fungicides. However, effective biological control requires enhancing the consistency and efficacy of the antagonists used to control postharvest diseases. This study investigated the effect of chitin on the biocontrol efficacy of Rhodotorula mucilaginosa against blue mold and Rhizopus decay of peaches and on the protein expression profiles of R. mucilaginosa. The antagonistic activity of R. mucilaginosa harvested from the nutrient yeast dextrose broth (NYDB) with 0.5% chitin added was significantly improved compared with culture in NYDB without chitin. The R. mucilaginosa population cultured in chitin-supplement NYDB and nutrient yeast chitin borth (NYCB) harvested from peach wounds was more than that of R. mucilaginosa cultured in NYDB without chitin throughout the storage period except at 1 d. The protein expression profiles findings revealed that there were several differentially expressed proteins of R. mucilaginosa in the 0.5% chitin-supplemented NYDB and NYCB compared with that of R. mucilaginosa in NYDB. Most of these were cellular proteomes relating to the primary metabolic reactions such as glycoside hydrolases, phosphoribosyl pyrophosphate, and NADH dehydrogenases. Some proteins were also related to signal transmission and stress response. Copyright © 2016 Elsevier B.V. All rights reserved.

Fusion reactor pumped laser

International Nuclear Information System (INIS)

Jassby, D.L.

1988-01-01

A nuclear pumped laser is described comprising: a toroidal fusion reactor, the reactor generating energetic neutrons; an annular gas cell disposed around the outer periphery of the reactor, the cell including an annular reflecting mirror disposed at the bottom of the cell and an annular output window disposed at the top of the cell; a gas lasing medium disposed within the annular cell for generating output laser radiation; neutron reflector material means disposed around the annular cell for reflecting neutrons incident thereon back into the gas cell; neutron moderator material means disposed between the reactor and the gas cell and between the gas cell and the neutron reflector material for moderating the energy of energetic neutrons from the reactor; converting means for converting energy from the moderated neutrons to energy pumping means for pumping the gas lasing medium; and beam compactor means for receiving output laser radiation from the annular output window and generating a single output laser beam therefrom

Reactor core cooling device

International Nuclear Information System (INIS)

Kobayashi, Masahiro.

1986-01-01

Purpose: To safely and effectively cool down the reactor core after it has been shut down but is still hot due to after-heat. Constitution: Since the coolant extraction nozzle is situated at a location higher than the coolant injection nozzle, the coolant sprayed from the nozzle, is free from sucking immediately from the extraction nozzle and is therefore used effectively to cool the reactor core. As all the portions from the top to the bottom of the reactor are cooled simultaneously, the efficiency of the reactor cooling process is increased. Since the coolant extraction nozzle can be installed at a point considerably higher than the coolant injection nozzle, the distance from the coolant surface to the point of the coolant extraction nozzle can be made large, preventing cavitation near the coolant extraction nozzle. Therefore, without increasing the capacity of the heat exchanger, the reactor can be cooled down after a shutdown safely and efficiently. (Kawakami, Y.)

Reactor shutdown device

International Nuclear Information System (INIS)

Inoue, Toyokazu.

1982-01-01

Purpose: To obtain a highly reliable reactor shutdown device capable of checking its function irrespective of the state whether shutdown or operation in a gas-cooled type reactor. Constitution: A hopper is disposed above a guide tube inserted into the reactor core and particulate neutron absorbers are contained in the hopper. An opening for falling particles is disposed to the bottom of the hopper in opposition to the upper end of the guide pipe and the opening is closed by a plug suspended by way of a weld line so as to be capable of dropping. A power source for supplying electrical current to the weld line is disposed. Accordingly, if the current is supplied to the weld line, the line is cut by welding to fall the plug so that the neutron-absorbing particles fall from the opening into the guide pipe to shutdown the reactor, whereby high reliability is obtained for the operation. (Seki, T.)

Characterization biometric and morphophysiological of Peach rootstock seeds using images of their seedling vigor.

Science.gov (United States)

Souza, Aline Das Graças; Smiderle, Oscar Jose; Bianchi, Valmor Joao

2018-04-26

This study aimed to evaluate the efficiency of using the computerized imaging seed analysis system (SAS) in the biometric and morphophysiological characterization of seeds and the initial growth of seedlings from peach rootstocks. The experimental design was completely randomized with five replicates of 20 seeds. The variables analyzed were degree of seed humidity, length and width of seeds measured by SAS technology and manual measurements, mean germination time, germination percentage, radicle length and width, taproot length, length of the aerial part and taproot/aerial part ratio. The highest seed length, germination percentage (100%) and lower germination time (11.3), were obtained with the cv. Capdeboscq while, 'Tsukuba 1', 2' and 3' had intermediate seedlings length, varying from 1.55 to 1.65 cm with mean germination times between 14.5 and 18.0 days and average germination percentage of 96%. The computerized analysis of images is fast and efficient for biometric evaluations such as seed width and length, as well as initial growth of peach tree seedlings. The cvs Capdeboscq, Flordaguard and Tsukuba 2 presented greater radicle width, length and a mean taproot/aerial part ratio equal to 2, as well as higher number of adventitious roots, which indicated a strong positive correlation between radicle length, taproot length and initial seedling growth. The continuity of the research will certainly allow the development of reliable procedures for other species, besides allowing the identification of wider alternatives for the use of this system for the expansion of knowledge in the areas of physiology and evaluation of the physiological potential of seeds. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

Radionuclide distributions and sorption behavior in the Susquehanna--Chesapeake Bay System

International Nuclear Information System (INIS)

Olsen, C.R.; Larsen, I.L.; Lowry, P.D.; McLean, R.I.; Domotor, S.L.

1989-01-01

Radionuclides released into the Susquehanna--Chesapeake System from the Three Mile Island, Peach Bottom, and Calvert Cliffs nuclear power plants are partitioned among dissolved, particulate, and biological phases and may thus exist in a number of physical and chemical forms. In this project, we have measured the dissolved and particulate distributions of fallout 137 Cs; reactor-released 137 Cs, 134 Cs, 65 Zn, 60 Co, and 58 Co; and naturally occurring 7 Be and 210 Pb in the lower Susquehanna River and Upper Chesapeake Bay. In addition, we chemically leached suspended particles and bottom sediments in the laboratory to determine radionuclide partitioning among different particulate-sorbing phases to complement the site-specific field data. This information has been used to document the important geochemical processes that affect the transport, sorption, distribution, and fate of reactor-released radionuclides (and by analogy, other trace contaminants) in this river-estuarine system. Knowledge of the mechanisms, kinetic factors, and processes that affect radionuclide distributions is crucial for predicting their biological availability, toxicity, chemical behavior, physical transport, and accumulation in aquatic systems. The results from this project provide the information necessary for developing accurate radionuclide-transport and biological-uptake models. 76 refs., 12 figs

Reactor theory and power reactors. 1. Calculational methods for reactors. 2. Reactor kinetics

International Nuclear Information System (INIS)

Henry, A.F.

1980-01-01

Various methods for calculation of neutron flux in power reactors are discussed. Some mathematical models used to describe transients in nuclear reactors and techniques for the reactor kinetics' relevant equations solution are also presented

Top-down versus bottom-up processing of influence diagrams in probabilistic analysis

International Nuclear Information System (INIS)

Timmerman, R.D.; Burns, T.J.; Dodds, H.L. Jr.

1984-01-01

Recent work by Phillips et al., and Selby et al., has shown that influence diagram methodology can be a useful analytical tool in reactor safety studies. An influence diagram is a graphical representation of probabilistic dependence within a system or event sequence. Bayesian statistics are employed to transform the relationships depicted in the influence diagram into the correct expression for a desired marginal probability (e.g. the top event). As with fault trees, top-down and bottom-up algorithms have emerged as the dominant methods for quantifying influence diagrams. Purpose of this paper is to demonstrate a potential error in employing the bottom-up algorithm when dealing with interdependencies. In addition, the computing efficiency of both methods is discussed

Pebble-bed reactor

International Nuclear Information System (INIS)

Lohnert, G.; Mueller-Frank, U.; Heil, J.

1976-01-01

A pebble-bed nuclear reactor of large power rating comprises a container having a funnel-shaped bottom forming a pebble run-out having a centrally positioned outlet. A bed of downwardly-flowing substantially spherical nuclear fuel pebbles is positioned in the container and forms a reactive nuclear core maintained by feeding unused pebbles to the bed's top surface while used or burned-out pebbles run out and discharge through the outlet. A substantially conical body with its apex pointing upwardly and its periphery spaced from the periphery of the container spreads the bottom of the bed outwardly to provide an annular flow down the funnel-shaped bottom forming the runout, to the discharge outlet. This provides a largely constant downward velocity of the spheres throughout the diameter of the bed throughout a substantial portion of the down travel, so that all spheres reach about the same burned-out condition when they leave the core, after a single pass through the core area

Reactor container

International Nuclear Information System (INIS)

Furukawa, Hideyasu; Oyamada, Osamu; Uozumi, Hiroto.

1976-01-01

Purpose: To provide a container for a reactor provided with a pressure suppressing chamber pool which can prevent bubble vibrating load, particularly negative pressure generated at the time of starting to release exhaust from a main steam escape-safety valve from being transmitted to a lower liner plate of the container. Constitution: This arrangement is characterized in that a safety valve exhaust pool for main steam escape, in which a pressure suppressing chamber pool is separated and intercepted from pool water in the pressure suppressing chamber pool, a safety valve exhaust pipe is open into said safety valve exhaust pool, and an isolator member, which isolates the bottom liner plate in the pressure suppressing chamber pool from the pool water, is disposed on the bottom of the safety valve exhaust pool. (Nakamura, S.)

Heat dissipating nuclear reactor

Science.gov (United States)

Hunsbedt, A.; Lazarus, J.D.

1985-11-21

Disclosed is a nuclear reactor containment adapted to retain and cool core debris in the unlikely event of a core meltdown and subsequent breach in the reactor vessel. The reactor vessel is seated in a cavity which has a thick metal sidewall that is integral with a thick metal basemat at the bottom of the cavity. The basemat extends beyond the perimeter of the cavity sidewall. Underneath the basemat is a porous bed with water pipes and steam pipes running into it. Water is introduced into the bed and converted into steam which is vented to the atmosphere. A plurality of metal pilings in the form of H-beams extend from the metal base plate downwardly and outwardly into the earth.

Ohmic heating of peaches in the wide range of frequencies (50 Hz to 1 MHz).

Science.gov (United States)

Shynkaryk, Mykola V; Ji, Taehyun; Alvarez, Valente B; Sastry, Sudhir K

2010-09-01

The ohmic heating (OH) rate of peaches was studied at fixed electric field strength of 60 V.cm⁻¹, square-shaped instant reversal bipolar pulses, and frequencies varying within 50 Hz to 1 MHz. Thermal damage of tissue was evaluated from electrical admittivity. It showed that the time for half disruption (τ(T)) of tissue was required more than 10 h at temperatures below 40 °C. However, cellular thermal disruption occurred almost instantly (τ(T) 90 °C). Electrical conductivity σ(o) and admittivity σ(o)* of tissue at T(o)= 0 °C and their temperature coefficients (m, m*) were calculated. For freeze-thawed tissues, σ and σ* as well as m and m* were nearly indifferent to the frequency. However, for the intact tissue, both σ(o), σ(o)* and m, m* were frequency dependent. For freeze-thawed product, the power factor (P) was approximately equal to 1 and indifferent to the frequency and temperature. On the other hand, strong frequency dependence was observed for intact tissue with the minimum P approximately equal to 0.68 in the range of tens of kHz. The time required to reach a target temperature t(f) was evaluated. The t(f) increased with frequency up to the middle of the range of tens of kHz and thereafter continuously decreased. Samples exposed to the low-frequency electric field demonstrated faster electro-thermal damage rates. The textural relaxation data supported more intense damage kinetics at low-frequency OH. It has been demonstrated that a combination of high-frequency OH with pasteurization at moderate temperature followed by rapid cooling minimizes texture degradation of peach tissue. In this study, we investigated the electric field frequency effect on the rate of OH of peaches. It was shown that the time required for reaching the target temperature is strongly dependent upon the frequency. Samples exposed to low-frequency OH demonstrated higher electro-thermal damage rates. It has been shown that the combination of high-frequency OH with

Divergence of the bZIP Gene Family in Strawberry, Peach, and Apple Suggests Multiple Modes of Gene Evolution after Duplication

Directory of Open Access Journals (Sweden)

Xiao-Long Wang

2015-01-01

Full Text Available The basic leucine zipper (bZIP transcription factors are the most diverse members of dimerizing transcription factors. In the present study, 50, 116, and 47 bZIP genes were identified in Malus domestica (apple, Prunus persica (peach, and Fragaria vesca (strawberry, respectively. Species-specific duplication was the main contributor to the large number of bZIPs observed in apple. After WGD in apple genome, orthologous bZIP genes corresponding to strawberry on duplicated regions in apple genome were retained. However, in peach ancestor, these syntenic regions were quickly lost or deleted. Maybe the positive selection contributed to the expansion of clade S to adapt to the development and environment stresses. In addition, purifying selection was mainly responsible for bZIP sequence-specific DNA binding. The analysis of orthologous pairs between chromosomes indicates that these orthologs derived from one gene duplication located on one of the nine ancient chromosomes in the Rosaceae. The comparative analysis of bZIP genes in three species provides information on the evolutionary fate of bZIP genes in apple and peach after they diverged from strawberry.

Effect of regulated deficit irrigation and crop load on the antioxidant compounds of peaches.

Science.gov (United States)

Buendía, Begoña; Allende, Ana; Nicolás, Emilio; Alarcón, Juan J; Gil, Maria I

2008-05-28

The use of regulated deficit irrigation (RDI) strategies is becoming a common practice in areas with low water availability. Little information is available about the effects of RDI on the antioxidant content of fruits. In this study, the influence of RDI on the content of vitamin C, phenolic compounds and carotenoids was investigated. Two irrigation strategies, fully irrigated (FI) and RDI, were compared at two levels of thinning, commercial and half of the commercial crop load. RDI strategies affected the content of vitamin C, phenolics and carotenoids of Flordastar peaches. RDI caused fruit peel stress lowering the content of vitamin C and carotenoids, while increasing the phenolic content, mainly anthocyanins and procyanidins. Fruit weight was the only quality index influenced by the crop load as it increased in FI fruits at low crop load. In general, fruits from commercial crop load had slightly higher content of antioxidants to fruits from low crop load, although these influences were only observed in the peel. Additionally, the influence of irrigation controlled by two sensors related to plant water level, maximum daily trunk shrinkage (MDS) and sap flow (SF) on the antioxidant constituents of peaches was evaluated. The response of the fruits to SF sensor was similar to that observed for RDI strategy. According to the tested water sensors, SF did not act as a good plant-based water indicator for use in irrigation scheduling, as it caused an increase in the content of phenolics, similar to that observed for fruits subjected to RDI. Therefore, selection of RDI strategies and plant water indicators should be taken into account as they affect the content of antioxidants of peaches.

Lipid-dissolved γ-carotene, β-carotene, and lycopene in globular chromoplasts of peach palm (Bactris gasipaes Kunth) fruits.

Science.gov (United States)

Hempel, Judith; Amrehn, Evelyn; Quesada, Silvia; Esquivel, Patricia; Jiménez, Víctor M; Heller, Annerose; Carle, Reinhold; Schweiggert, Ralf M

2014-11-01

High levels of β-carotene, lycopene, and the rare γ-carotene occur predominantly lipid-dissolved in the chromoplasts of peach palm fruits. First proof of their absorption from these fruits is reported. The structural diversity, the physical deposition state in planta, and the human bioavailability of carotenoids from the edible fruits of diverse orange and yellow-colored peach palm (Bactris gasipaes Kunth) varieties were investigated. HPLC-PDA-MS(n) revealed a broad range of carotenes, reaching total carotenoid levels from 0.7 to 13.9 mg/100 g FW. Besides the predominant (all-E)-β-carotene (0.4-5.4 mg/100 g FW), two (Z)-isomers of γ-carotene (0.1-3.9 mg/100 g FW), and one (Z)-lycopene isomer (0.04-0.83 mg/100 g FW) prevailed. Approximately 89-94 % of total carotenoid content pertained to provitamin A carotenoids with retinol activity equivalents ranging from 37 to 609 µg/100 g FW. The physical deposition state of these carotenoids in planta was investigated using light, transmission electron, and scanning electron microscopy. The plastids found in both orange and yellow-colored fruit mesocarps were amylo-chromoplasts of the globular type, containing carotenoids predominantly in a lipid-dissolved form. The hypothesis of lipid-dissolved carotenoids was supported by simple solubility estimations based on carotenoid and lipid contents of the fruit mesocarp. In our study, we report first results on the human bioavailability of γ-carotene, β-carotene, and lycopene from peach palm fruit, particularly proving the post-prandial absorption of the rarely occurring γ-carotene. Since the physical state of carotenoid deposition has been shown to be decisive for carotenoid bioavailability, lipid-dissolved carotenoids in peach palm fruits are expected to be highly bioavailable, however, further studies are required.

Isolation and expression analysis of four HD-ZIP III family genes targeted by microRNA166 in peach.

Science.gov (United States)

Zhang, C H; Zhang, B B; Ma, R J; Yu, M L; Guo, S L; Guo, L

2015-10-30

MicroRNA166 (miR166) is known to have highly conserved targets that encode proteins of the class III homeodomain-leucine zipper (HD-ZIP III) family, in a broad range of plant species. To further understand the relationship between HD-ZIP III genes and miR166, four HD-ZIP III family genes (PpHB14, PpHB15, PpHB8, and PpREV) were isolated from peach (Prunus persica) tissue and characterized. Spatio-temporal expression profiles of the genes were analyzed. Genes of the peach HD-ZIP III family were predicted to encode five conserved domains. Deduced amino acid sequences and tertiary structures of the four peach HD-ZIP III genes were highly conserved, with corresponding genes in Arabidopsis thaliana. The expression level of four targets displayed the opposite trend to that of miR166 throughout fruit development, with the exception of PpHB14 from 35 to 55 days after full bloom (DAFB). This finding indicates that miR166 may negatively regulate its four targets throughout fruit development. As for leaf and phloem, the same trend in expression level was observed between four targets and miR166 from 75 to 105 DAFB. However, the opposite trend was observed for the transcript level between four targets and miR166 from 35 to 55 DAFB. miRNA166 may negatively regulate four targets in some but not all developmental stages for a given tissue. The four genes studied were observed to have, exactly or generally, the same change tendency as individual tissue development, a finding that suggests genes of the HD-ZIP III family in peach may have complementary or cooperative functions in various tissues.

Environmental effects on fruit ripening and average fruit weight for three peach cultivars

Science.gov (United States)

Three peach cultivars, ‘Crimson Lady’ (early), ‘Redhaven’ (mid-season) and ‘Cresthaven’ (late), were planted at twelve locations within the USA in 2009. All trees were grafted on ‘Lovell’ rootstock and came from the same nursery. Five trees of each cultivar were planted at a spacing of 6m by 5m at e...

Pressurized water reactor with a reactor pressure vessel

International Nuclear Information System (INIS)

Werres, L.

1979-01-01

The core barrel is suspended from a flange by means of a grid. The coolant enters the barrel from below through the grid. In order to get a uniform flow over the reactor core there is provided for a guiding device below the grid. It consists of a cylindrical shell with borings uniformly distributed around the shell as well as fins on the inner surface of the shell and slots at the bottom facing the pressure vessel. (GL) [de

BR2 reactor neutron beams

International Nuclear Information System (INIS)

Neve de Mevergnies, M.

1977-01-01

The use of reactor neutron beams is becoming increasingly more widespread for the study of some properties of condensed matter. It is mainly due to the unique properties of the ''thermal'' neutrons as regards wavelength, energy, magnetic moment and overall favorable ratio of scattering to absorption cross-sections. Besides these fundamental reasons, the impetus for using neutrons is also due to the existence of powerful research reactors (such as BR2) built mainly for nuclear engineering programs, but where a number of intense neutron beams are available at marginal cost. A brief introduction to the production of suitable neutron beams from a reactor is given. (author)

Fission product release from SLOWPOKE-2 reactors

Energy Technology Data Exchange (ETDEWEB)

Harnden-Gillis, A M.C. [Queen` s Univ., Kingston, ON (Canada). Dept. of Physics

1994-12-31

Increasing radiation fields at several SLOWPOKE-2 reactors fuelled with highly enriched uranium aluminum alloy fuel have begun to interfere with the daily operation of these reactors. To investigate this phenomenon, samples of reactor container water and gas from the headspace were obtained at four SLOWPOKE-2 reactor facilities and examined by gamma ray spectroscopy methods. These radiation fields are due to the circulation of fission products within the reactor container vessel. The most likely source of the fission product release is an area of uranium-bearing material exposed to the coolant at the end weld line which originated at the time of fuel fabrication. The results of this study are compared with observations from an underwater visual examination of one core and the metallographic examination of archived fuel elements. 19 refs., 4 tabs., 8 figs.

Underground nuclear power station using self-regulating heat-pipe controlled reactors

International Nuclear Information System (INIS)

Hampel, V.E.

1989-01-01

The author presents a nuclear reactor for generating electricity disposed underground at the bottom of a vertical hole that can be drilled using conventional drilling technology. The primary coolant of the reactor core is the working fluid in a plurality of thermodynamically coupled heat pipes emplaced in the hole between the heat source at the bottom of the hole and heat exchange means near the surface of the earth. Additionally, the primary coolant (consisting of the working fluid in the heat pipes in the reactor core) moderates neutrons and regulates their reactivity, thus keeping the power of the reactor substantially constant. At the end of its useful life, the reactor core may be abandoned in place. Isolation from the atmosphere in case of accident or for abandonment is provided by the operation of explosive closures and mechanical valves emplaced along the hole. This invention combines technology developed and tested for small, highly efficient, space-based nuclear electric power plants with the technology of fast-acting closure mechanisms developed and used for underground testing of nuclear weapons. This invention provides a nuclear power installation which is safe from the worst conceivable reactor accident, namely, the explosion of a nuclear weapon near the ground surface of a nuclear power reactor

Underground nuclear power station using self-regulating heat-pipe controlled reactors

Science.gov (United States)

Hampel, Viktor E.

1989-01-01

A nuclear reactor for generating electricity is disposed underground at the bottom of a vertical hole that can be drilled using conventional drilling technology. The primary coolant of the reactor core is the working fluid in a plurality of thermodynamically coupled heat pipes emplaced in the hole between the heat source at the bottom of the hole and heat exchange means near the surface of the earth. Additionally, the primary coolant (consisting of the working flud in the heat pipes in the reactor core) moderates neutrons and regulates their reactivity, thus keeping the power of the reactor substantially constant. At the end of its useful life, the reactor core may be abandoned in place. Isolation from the atmosphere in case of accident or for abandonment is provided by the operation of explosive closures and mechanical valves emplaced along the hole. This invention combines technology developed and tested for small, highly efficient, space-based nuclear electric power plants with the technology of fast-acting closure mechanisms developed and used for underground testing of nuclear weapons. This invention provides a nuclear power installation which is safe from the worst conceivable reactor accident, namely, the explosion of a nuclear weapon near the ground surface of a nuclear power reactor.

Influence of Inter stock Grafting as a Dwarfing Component on Peach Trees Development and Fruit Quality

International Nuclear Information System (INIS)

Hossain, S.; Nasrulhaq, A.; Mizutani, F.

2006-01-01

A field experiment was conducted to investigate the interstock grafting effect as a dwarfing component on Peach tree development and fruit quality. The study was made at the Ehime University Experimental farm located in south-eastern Japan during the period 2001-2005. The results of the field experiment indicated that pruned branches weight and flowers number were lower in interstock than in control trees. However, percent fruit set was a little higher in intersrock treated than in control trees. Fruit yield and fruit weight were lower in interstock treated than control trees. Soluble solids content and maturity index were higher in interstock treated trees than control, with an increasing trend in the period from 2001 to 2005, while titratable acidity showed that the livestock grafting is a useful dwarfing component for controlling the size of peach trees and improvement of fruit quality. (author)

Separation of top and bottom surface conduction in Bi2Te3 thin films

International Nuclear Information System (INIS)

Yu Xinxin; He Liang; Lang Murong; Jiang Wanjun; Kou Xufeng; Tang Jianshi; Huang Guan; Wang, Kang L; Xiu Faxian; Liao Zhiming; Zou Jin; Wang Yong; Zhang Peng

2013-01-01

Quantum spin Hall (QSH) systems are insulating in the bulk with gapless edges or surfaces that are topologically protected and immune to nonmagnetic impurities or geometric perturbations. Although the QSH effect has been realized in the HgTe/CdTe system, it has not been accomplished in normal 3D topological insulators. In this work, we demonstrate a separation of two surface conductions (top/bottom) in epitaxially grown Bi 2 Te 3 thin films through gate dependent Shubnikov–de Haas (SdH) oscillations. By sweeping the gate voltage, only the Fermi level of the top surface is tuned while that of the bottom surface remains unchanged due to strong electric field screening effects arising from the high dielectric constant of Bi 2 Te 3 . In addition, the bulk conduction can be modulated from n- to p-type with a varying gate bias. Our results on the surface control hence pave a way for the realization of QSH effect in topological insulators which requires a selective control of spin transports on the top/bottom surfaces. (paper)

Fuel assembly for a nuclear reactor

International Nuclear Information System (INIS)

Gjertsen, R.K.; Tower, S.N.; Huckestein, E.A.

1982-01-01

A fuel assembly for a nuclear reactor comprises a 5x5 array of guide tubes in a generally 20x20 array of fuel elements, the guide tubes being arranged to accommodate either control rods or water displacer rods. The fuel assembly has top and bottom Inconel (Registered Trade Mark) grids and intermediate Zircaloy grids in engagement with the guide tubes and supporting the fuel elements and guide tubes while allowing flow of reactor coolant through the assembly. (author)

Pressurized water reactor simulator. Workshop material. 2. ed

International Nuclear Information System (INIS)

2005-01-01

The International Atomic Energy Agency (IAEA) has established an activity in nuclear reactor simulation computer programs to assist its Member States in education. The objective is to provide, for a variety of advanced reactor types, insight and practice in their operational characteristics and their response to perturbations and accident situations. To achieve this, the IAEA arranges for the development and distribution of simulation programs and educational material and sponsors courses and workshops. The workshops are in two parts: techniques and tools for reactor simulator development. And the use of reactor simulators in education. Workshop material for the first part is covered in the IAEA Training Course Series No. 12, 'Reactor Simulator Development' (2001). Course material for workshops using a WWER- 1000 reactor department simulator from the Moscow Engineering and Physics Institute, the Russian Federation is presented in the IAEA Training Course Series No. 21, 2nd edition, 'WWER-1000 Reactor Simulator' (2005). Course material for workshops using a boiling water reactor simulator developed for the IAEA by Cassiopeia Technologies Incorporated of Canada (CTI) is presented in the IAEA publication: Training Course Series No.23, 2nd edition, 'Boiling Water Reactor Simulator' (2005). This report consists of course material for workshops using a pressurized water reactor simulator

Development and Field Application Experience of the Reactor Internal Preventive Maintenance Technology

International Nuclear Information System (INIS)

Kanno, A.; Yoshikubo, F.; Morinaka, R.; Tanaka, M.; Hasegawa, K.; Hatou, H.

2012-01-01

A reactor internal preventive maintenance technology, Water Jet Peening (WJP), has been developed as a stress corrosion cracking (SCC) mitigation technology that has been successfully implemented during refuelling outages at 15 Boiling Water Reactors (BWR) and three (3) Advanced BWRs (during the site construction and in the shop fabrication) in Japan. WJP is one of the most successful underwater peening methods, which utilizes the energy generated from the collapsing of bubbles produced by the cavitating water jet nozzle. The energy produced from the cavitations introduces compressive residual stress on the metal surface and subsurface up to a depth of several hundred micrometers. Most recently, we have successfully applied WJP to the bottom head components and to some cracked areas on the shroud support in the Tokai-2 plant. In the case of the bottom head components, we produced inspection and repair tooling as a contingency in the event SCC was identified and would be required to be repaired prior to the implementation of WJP. (author)

Incidence and phylogenetic analyses of Armillaria spp. associated with root disease in peach orchards in the State of Mexico, Mexico

Science.gov (United States)

R. D. Elias-Roman; R. A. Guzman-Plazola; N. B. Klopfenstein; D. Alvarado-Rosales; G. Calderon-Zavala; J. A. Mora-Aguilera; M.-S. Kim; R. Garcia-Espinosa

2013-01-01

Incidence of peach [Prunus persica (L.) Batsch] tree mortality attributed to Armillaria root disease was assessed from 2009 to 2011 in 15 orchards in the State of Mexico, Mexico. Incidence increased gradually every year of assessment, reaching average values of 9.7, 15.3 and 20.3% tree mortality and 23.2, 24.7 and 28.3% disease-impacted area of the orchards during 2009...

Cooperative problem solving capabilities of Peach-fronted Conures (Eupsittula aurea)

DEFF Research Database (Denmark)

Torres Ortiz, Sara; Corregidor, Alejandro; Larsen, Ole Næsbye

We investigated basic cognitive skills of individual Peach-fronted Conures (Eupsittula aurea, PFC) using ’the string-pulling test’ and their cooperative capabilities using ’the loose-string test’. First, 2-4 strings were suspended in different configurations to the underside of a perch. A food...... reward was attached to the end of one of the strings. By varying different spatial configurations of strings and rewards, different cognitive skills could be elucidated. Two females and two males were tested. All individuals solved three out of four string configurations (four straight strings, two slant...... strings, two contact-no contact strings), but all failed in a crossed strings test. Subsequently we tested the birds with a vertical pulley that required the birds to pull the string down to move the food reward upwards and within reach. This test was only solved by the males. The latter test showed...

Preliminary conceptual design and analysis on KALIMER reactor structures

International Nuclear Information System (INIS)

Kim, Jong Bum

1996-10-01

The objectives of this study are to perform preliminary conceptual design and structural analyses for KALIMER (Korea Advanced Liquid Metal Reactor) reactor structures to assess the design feasibility and to identify detailed analysis requirements. KALIMER thermal hydraulic system analysis results and neutronic analysis results are not available at present, only-limited preliminary structural analyses have been performed with the assumptions on the thermal loads. The responses of reactor vessel and reactor internal structures were based on the temperature difference of core inlet and outlet and on engineering judgments. Thermal stresses from the assumed temperatures were calculated using ANSYS code through parametric finite element heat transfer and elastic stress analyses. While, based on the results of preliminary conceptual design and structural analyses, the ASME Code limits for the reactor structures were satisfied for the pressure boundary, the needs for inelastic analyses were indicated for evaluation of design adequacy of the support barrel and the thermal liner. To reduce thermal striping effects in the bottom are of UIS due to up-flowing sodium form reactor core, installation of Inconel-718 liner to the bottom area was proposed, and to mitigate thermal shock loads, additional stainless steel liner was also suggested. The design feasibilities of these were validated through simplified preliminary analyses. In conceptual design phase, the implementation of these results will be made for the design of the reactor structures and the reactor internal structures in conjunction with the thermal hydraulic, neutronic, and seismic analyses results. 4 tabs., 24 figs., 4 refs. (Author)

Effect of Nano Packaging on Storage Life and Quality Attributes of Elberta Peach

Directory of Open Access Journals (Sweden)

Mohammadreza Asghari

2017-12-01

Full Text Available Introduction: Asaclimactericfruit, peach has a highrespiration rateandvery lowshelf life. Nowadays theuse ofappropriatepostharvesttechnologiesto increase fruit postharvest lifeis necessary.Use of nanotechnologyis considered asan effective method to increase fruit postharvest life. Nanotechnology isused extensivelyinallstages of production, processing, storage, packagingand transport ofagriculturalproducts.The objective of this study was to investigate the effect of silver and silica nanocomposites, nanosilver and polypropylene containers on shelf-life and preservation of peach qualitative characteristics (Prunuspersicacv. Elberta such as titrable acidity, soluble solids, ascorbic acid, total antioxidant and total phenolics content in cold storage after the harvest. Materials and Methods: To determine the effect of nanopackaging onshelf life andqualitativecharacteristics ofElberta peaches,the experiment was conducted in a factorial based on a completely randomized design with two treatmentsand four replications.The first factor consisted of nanopackagingnanosilver, silver and silica nanocompositesandpolypropylenepackaging, and the second factor was coldstorage periods of15, 30 and 45 daysattemperaturesfrom 0 to0/5 °C and a relative humidityof 85to 95%.In general, the experiment consisted of 36 experimental units, and each includinga container with four Elberta peach fruits.Data were analyzed by using SAS software, and Microsoft Office Excel 2010 software was used to plot the graphs.Duncan's multiple range test was used to compare the means of treatments. Results and Discussion: At the end of the maintenance period, the highest firmness of peach texture was related to nanosilver containers. The main cause of fruit softening is the destruction of cell wall components, especially pectin, which is caused by certain enzymes such as polygalactronase. Whenstorage timeincreased, polypropylene containers showed a higher weight loss compared to

Radioactive contamination of the Dutch soil in consequence of the nuclear reactor accident at Chernobyl

International Nuclear Information System (INIS)

Koester, H.W.; Mattern, F.C.M.; Pennders, R.M.J.

1987-01-01

As a consequence of the reactor accident in Chernobyl air, contaminated with radioactive materials, spread over the Netherlands. From 2nd May to 6th May, with dry and to a greater extent with wet deposits, important quantities of radionuclides came upon the earth surface. In this period the weather circumstances within the Netherlands differed strongly resulting in distinct variations in deposit. In this document a preliminary picture is given of the contamination of the Dutch bottom on the basis of soil samplings made in the first few months after the accident. No attention is paid to geographic differences in bottom contamination. The contamination of the bottom is expressed in Bq/kg dry soil as well as in Bq/m 2 soil. 5 refs.; 6 tabs. (H.W.)

Neutronics comparative analysis between MNSR and slowpoke-II reactors

International Nuclear Information System (INIS)

Khamis, I.; Khattab, K.

1999-01-01

Neutronics analysis of both MNSR and Slowpoke reactors were made. Calculations including flux distribution, power estimation, excess and shutdown reactivity margins, flooding effects of irradiation sites, and initial investigation of fuel conversion from high to low enriched uranium were discussed. A neutronic 3-D model, dedicated mainly for the MNSR, has been developed to perform such neutronic calculations for both reactors. Well-known cell and core calculation codes such as WIMSD4 and CITATIONS have been used. It was found out that it is possible to lower the fuel enrichment of the Miniature Neutron Source Reactor (MNSR) to 20% using U O 2 as fuel instead of U Al 4 . The number of fuel elements required for the new core is 199. The use of double thickness of the bottom reflector in Slowpoke reactor made it possible to load the reactor with lower enriched fuel compared to MNSR. Values of reactivity flooding effects for single or combination of inner irradiation sites were obtained accurately. Results show good agreement with reported data for MNSR. (author)

Root and aerial growth in early-maturing peach trees under two crop load treatments

Energy Technology Data Exchange (ETDEWEB)

Abrisqueta, I.; Conejero, W.; López-Martínez, L.; Vera, J.; Ruiz Sánchez, M.C.

2017-07-01

The objectives of the paper were to study the pattern of root growth (measured by minirhizotrons) in relation to trunk, fruit and shoot growth and the effects of crop load on tree growth and yield in peach trees. Two crop load (commercial and low) treatments were applied in a mature early-maturing peach tree orchard growing in Mediterranean conditions. Root growth dynamics were measured using minirhizotrons during one growing season. Shoot, trunk and fruit growth were also measured. At harvest, all fruits were weighed, counted and sized. Roots grew throughout the year but at lower rates during the active fruit growth phase. Root growth was asynchronous with shoot growth, while root and trunk growth rates were highest after harvest, when the canopy was big enough to allocate the photo-assimilates to organs that would ensure the following season’s yield. Shoot and fruit growth was greater in the low crop load treatment and was accompanied by a non-significant increase in root growth. High level of fruit thinning decreased the current yield but the fruits were more marketable because of their greater size.

Bottom-Up, Wet Chemical Technique for the Continuous Synthesis of Inorganic Nanoparticles

Directory of Open Access Journals (Sweden)

Annika Betke

2014-01-01

Full Text Available Continuous wet chemical approaches for the production of inorganic nanoparticles are important for large scale production of nanoparticles. Here we describe a bottom-up, wet chemical method applying a microjet reactor. This technique allows the separation between nucleation and growth in a continuous reactor environment. Zinc oxide (ZnO, magnetite (Fe3O4, as well as brushite (CaHPO4·2H2O, particles with a small particle size distribution can be obtained continuously by using the rapid mixing of two precursor solutions and the fast removal of the nuclei from the reaction environment. The final particles were characterized by FT-IR, TGA, DLS, XRD and SEM techniques. Systematic studies on the influence of the different process parameters, such as flow rate and process temperature, show that the particle size can be influenced. Zinc oxide was obtained with particle sizes between 44 nm and 102 nm. The obtained magnetite particles have particle sizes in the range of 46 nm to 132 nm. Brushite behaves differently; the obtained particles were shaped like small plates with edge lengths between 100 nm and 500 nm.

Coolant clean-up system in the primary coolant circuit for nuclear reactor

International Nuclear Information System (INIS)

Saito, Michio.

1981-01-01

Purpose: To maintain the quality of coolants at a prescribed level by distillating coolants in the primary coolant circuit for a BWR type reactor to remove impurities therefrom, taking out the condensates from the top of the distillation column and extracting impurities in a concentrated state from the bottom. Constitution: Coolant water for cooling the core is recycled by a recycling pump by way of a recycling pipeway in a reactor. The coolants extracted from an extraction pipeway connected to the recycling pipeway are fed into a distillation column, where distillation is taken place. Impurities in the coolants, that is, in-core corrosion products, fission products generated in the reactor core, etc. are separated by the distillation, concentrated and solidified in the bottom of the distillation column. While on the other hand, condensates removed with the impurities, that is, coolants cleaned-up are recycled to the coolant water for cooling the reactor core. (Moriyama, K.)

Evaluation of wrapper tube temperatures of fast neutron reactors using the TRANSCOEUR-2 code

Energy Technology Data Exchange (ETDEWEB)

Valentin, B.; Brun P. [CEA/DRN/DEC/SECA/LHC CEN, St Paul Lez Durance (France); Chaigne, G. [FRAMATOME/NOVATOME, Lyon (France)

1995-09-01

This paper deals with the thermal loading estimation of wrapper tubes using the TRANSCOEUR-2 code. This estimation requires a knowledge of two temperature fields: the first involves the peripheral sub-channel temperatures of each sub-assembly calculated by the design code CADET, and the second, outside the sub-assemblies, is the inter-wrapper flow temperature field calculated by the thermal-hydraulic code TRIO-VF with boundary conditions taken from CADET. Theoretical models of the three codes are presented as well as the first TRANSCOEUR-2 wrapper tube temperature calculation performed on the European Fast Reactor (EFR) Core Design 6/91 (CD 6/91) under nominal power conditions. The results show a temperature variation of 115{degrees}C between the bottom of the lower blanket and the top of the upper blanket fuel sub-assemblies in the center of the core and 95{degrees}C at the core periphery. The wrapper tube temperatures are higher in the center than in the external core.

Carbohydrate composition of peach palm (Bactris gasipaes Kunth) by-products flours.

Science.gov (United States)

Bolanho, Beatriz Cervejeira; Danesi, Eliane Dalva Godoy; Beléia, Adelaide Del Pino

2015-06-25

The flours obtained from peach palm by-products are rich in dietary fiber (62-71%) and they can be used as food ingredients. The aim of this work was to investigate the carbohydrate composition of the flours processed from the residual parts (stem and median sheath) of a hearts-of-palm industry. The flours were fractionated, based on their solubility, whose monomeric compounds were determined. The fraction containing mostly cellulose (S5) was the most abundant (26-28%), followed by the sum of fractions (S2, 53, S4) extracted with alkaline solutions (21-22%). The S1 fraction contained the highest percentage of uronic acids, which characterizes the presence of pectin. Xylose and arabinose were found in high proportion in S2 and S3 fractions. The S4 and S5 fractions, rich in glucose, were the main portion of the cell wall material and correspond to the insoluble fraction of the dietary fiber. Copyright © 2015 Elsevier Ltd. All rights reserved.

An underground nuclear power station using self-regulating heat-pipe controlled reactors

Science.gov (United States)

Hampel, V.E.

1988-05-17

A nuclear reactor for generating electricity is disposed underground at the bottom of a vertical hole that can be drilled using conventional drilling technology. The primary coolant of the reactor core is the working fluid in a plurality of thermodynamically coupled heat pipes emplaced in the hole between the heat source at the bottom of the hole and heat exchange means near the surface of the earth. Additionally, the primary coolant (consisting of the working fluid in the heat pipes in the reactor core) moderates neutrons and regulates their reactivity, thus keeping the power of the reactor substantially constant. At the end of its useful life, the reactor core may be abandoned in place. Isolation from the atmosphere in case of accident or for abandonment is provided by the operation of explosive closures and mechanical valves emplaced along the hole. This invention combines technology developed and tested for small, highly efficient, space-based nuclear electric power plants with the technology of fast- acting closure mechanisms developed and used for underground testing of nuclear weapons. This invention provides a nuclear power installation which is safe from the worst conceivable reactor accident, namely, the explosion of a nuclear weapon near the ground surface of a nuclear power reactor. 5 figs.

Produção integrada e convencional de pêssegos cv. Marli Integrated and convetional production of peach cv. Marli

Directory of Open Access Journals (Sweden)

José Luis da Silva Nunes

2004-12-01

Full Text Available O cultivo de pessegueiros é uma atividade de grande importância econômica no Sul do Brasil, onde se destaca o Estado do Rio Grande do Sul como maior produtor brasileiro. Um dos aspectos mais importantes na produção de alimentos da atualidade é a redução no uso de agroquímicos, com menor contaminação do ambiente e riscos reduzidos de resíduos. Este trabalho visou a comparar os sistemas de Produção Convencional (PC e Integrada (PI de pêssegos e foi realizado no ano de 2001, no município de São Jerônimo - RS, latitude 30°05'52" S, longitude 51°39'08" W e altitude de 46 metros. Áreas de um pomar comercial da cv. Marli foram avaliadas em relação às principais práticas de manejo da planta e do solo, controle fitossanitário, aspectos econômicos, bem como à qualidade da fruta. Na área conduzida sob PI, foram utilizadas as práticas de manejo preconizadas pelas Normas de Produção Integrada de Pêssegos (NPIP e, na área conduzida no sistema de PC, as plantas foram manejadas de acordo com as práticas comumente utilizadas pelo produtor. A produção de pêssegos, em ambos os sistemas, não foi afetada. Na área de PI, houve menor número de pêssegos por planta; entretanto, as frutas apresentaram maior peso médio. A maioria dos pêssegos da PI foram classificados como CAT I (diâmetro superior a 57 mm. As frutas produzidas na PC são, na maioria, de CAT II (de 48 a 57 mm. A qualidade pós-colheita não apresentou diferenças em relação à acidez, firmeza e cor. Com base nestes resultados, podemos concluir que é possível produzir pêssegos de qualidade com produtividade no sistema de PI.The peach-trees cultivation is a very economic important activity in South of Brazil, where highlights the State of Rio Grande do Sul as the largest Brazilian producer. One of the most important aspects in actuality is the food prodution with reduction of agrochemicals components, reducing the risks of environment contamination. This work

Study of 'Redhaven' peach and its white-fleshed mutant suggests a key role of CCD4 carotenoid dioxygenase in carotenoid and norisoprenoid volatile metabolism

Directory of Open Access Journals (Sweden)

Tartarini Stefano

2011-01-01

Full Text Available Abstract Background Carotenoids are plant metabolites which are not only essential in photosynthesis but also important quality factors in determining the pigmentation and aroma of flowers and fruits. To investigate the regulation of carotenoid metabolism, as related to norisoprenoids and other volatile compounds in peach (Prunus persica L. Batsch., and the role of carotenoid dioxygenases in determining differences in flesh color phenotype and volatile composition, the expression patterns of relevant carotenoid genes and metabolites were studied during fruit development along with volatile compound content. Two contrasted cultivars, the yellow-fleshed 'Redhaven' (RH and its white-fleshed mutant 'Redhaven Bianca' (RHB were examined. Results The two genotypes displayed marked differences in the accumulation of carotenoid pigments in mesocarp tissues. Lower carotenoid levels and higher levels of norisoprenoid volatiles were observed in RHB, which might be explained by differential activity of carotenoid cleavage dioxygenase (CCD enzymes. In fact, the ccd4 transcript levels were dramatically higher at late ripening stages in RHB with respect to RH. The two genotypes also showed differences in the expression patterns of several carotenoid and isoprenoid transcripts, compatible with a feed-back regulation of these transcripts. Abamine SG - an inhibitor of CCD enzymes - decreased the levels of both isoprenoid and non-isoprenoid volatiles in RHB fruits, indicating a complex regulation of volatile production. Conclusions Differential expression of ccd4 is likely to be the major determinant in the accumulation of carotenoids and carotenoid-derived volatiles in peach fruit flesh. More in general, dioxygenases appear to be key factors controlling volatile composition in peach fruit, since abamine SG-treated 'Redhaven Bianca' fruits had strongly reduced levels of norisoprenoids and other volatile classes. Comparative functional studies of peach carotenoid

Conservation implications of the mating system of the Pampa Hermosa landrace of peach palm analyzed with microsatellite markers.

Science.gov (United States)

Picanço-Rodrigues, Doriane; Astolfi-Filho, Spartaco; Lemes, Maristerra R; Gribel, Rogerio; Sebbenn, Alexandre M; Clement, Charles R

2015-03-01

Peach palm (Bactris gasipaes) is cultivated by many indigenous and traditional communities from Amazonia to Central America for its edible fruits, and is currently important for its heart-of-palm. The objective of this study was to investigate the mating system of peach palm, as this is important for conservation and breeding. Eight microsatellite loci were used to genotype 24 open-pollinated progenies from three populations of the Pampa Hermosa landrace maintained in a progeny trial for genetic improvement. Both the multi-locus outcrossing rates (0.95 to 0.99) and the progeny level multi-locus outcrossing rates (0.9 to 1.0) were high, indicating that peach palm is predominantly allogamous. The outcrossing rates among relatives were significantly different from zero (0.101 to 0.202), providing evidence for considerable biparental inbreeding within populations, probably due to farmers planting seeds of a small number of open-pollinated progenies in the same plot. The correlations of paternity estimates were low (0.051 to 0.112), suggesting a large number of pollen sources (9 to 20) participating in pollination of individual fruit bunches. Effective population size estimates suggest that current germplasm collections are insufficient for long-term ex situ conservation. As with most underutilized crops, on farm conservation is the most important component of an integrated conservation strategy.

Conservation implications of the mating system of the Pampa Hermosa landrace of peach palm analyzed with microsatellite markers

Directory of Open Access Journals (Sweden)

Doriane Picanço-Rodrigues

2015-03-01

Full Text Available Peach palm (Bactris gasipaes is cultivated by many indigenous and traditional communities from Amazonia to Central America for its edible fruits, and is currently important for its heart-of-palm. The objective of this study was to investigate the mating system of peach palm, as this is important for conservation and breeding. Eight microsatellite loci were used to genotype 24 open-pollinated progenies from three populations of the Pampa Hermosa landrace maintained in a progeny trial for genetic improvement. Both the multi-locus outcrossing rates (0.95 to 0.99 and the progeny level multi-locus outcrossing rates (0.9 to 1.0 were high, indicating that peach palm is predominantly allogamous. The outcrossing rates among relatives were significantly different from zero (0.101 to 0.202, providing evidence for considerable biparental inbreeding within populations, probably due to farmers planting seeds of a small number of open-pollinated progenies in the same plot. The correlations of paternity estimates were low (0.051 to 0.112, suggesting a large number of pollen sources (9 to 20 participating in pollination of individual fruit bunches. Effective population size estimates suggest that current germplasm collections are insufficient for long-term ex situ conservation. As with most underutilized crops, on farm conservation is the most important component of an integrated conservation strategy.

SELECTIVITY OF INSECTICIDES USED IN PEACH FARMING TO LARVAE OF Chrysoperla externa (NEUROPTERA: CHRYSOPIDAE IN SEMI-FIELD CONDITIONS

Directory of Open Access Journals (Sweden)

RODOLFO VARGAS CASTILHOS

2017-01-01

Full Text Available The selectivity of five insecticides, regularly used in peach farming, was assessed for larvae of the predator Chrysoperla externa (Hagen (Neuroptera: Chrysopidae by means of bioassay in semi-field conditions. The bioassay was based on the counting of captured larvae after release in peach trees treated with the insecticides (% of active ingredient in spray liquid: deltamethrin (0.001, fenthion (0.050, phosmet (0.100, lufenuron (0.005 and malathion (0.200. Bait-cards with eggs of Anagasta kuehniella (Zeller (Lepidoptera: Pyralidae were used to capture larvae from treated plants; five of them were fixed in plant canopy and five others left on the soil around stem. A protective barrier made up of galvanized steel sheet was used for each plant to avoid loss of larvae. The number of larvae feeding on the bait-cards was measured for four days. According to the number of captured larvae, each insecticide effect was estimated and classified into toxicity categories as stated by the International Organization for Biological and Integratec Control of Noxious Animals and Plants (IOBC. Based on observations, the insect growth regulator lufenuron was harmless, while the neurotoxins deltamethrin and malathion were slightly harmful; and lastly, fenthion and phosmet were moderately harmful to C. externa larvae in semi-field conditions. Thus, lufenuron should be recommended for integrated pest management, since it would preserve this predator species in peach orchards.

Advances in Reactor Physics, Mathematics and Computation. Volume 2

Energy Technology Data Exchange (ETDEWEB)

1987-01-01

These proceedings of the international topical meeting on advances in reactor physics, mathematics and computation, Volume 2, are divided into 7 sessions bearing on: - session 7: Deterministic transport methods 1 (7 conferences), - session 8: Interpretation and analysis of reactor instrumentation (6 conferences), - session 9: High speed computing applied to reactor operations (5 conferences), - session 10: Diffusion theory and kinetics (7 conferences), - session 11: Fast reactor design, validation and operating experience (8 conferences), - session 12: Deterministic transport methods 2 (7 conferences), - session 13: Application of expert systems to physical aspects of reactor design and operation.

Performance improvement inpolymer-based thin film transistor using modified bottom-contact structures with etched SiO{sub 2} layers

Energy Technology Data Exchange (ETDEWEB)

Park, Jeong Woo [R and D Center, Samsung Corning Precision Materials Co., Ltd, Asan (Korea, Republic of); You, Young Jun; Shim, Jae Won [Dept. of Electronics and Electrical Engineering, Dongguk University-Seoul, Seoul (Korea, Republic of)

2017-02-15

Polymer-based thin film transistors (TFTs) with a modified bottom-contact structure and etched SiO{sub 2} layer were developed and investigated. An increase in the field-effect mobility in the developed TFTs compared to TFTs with a normal bottom-contact structure was ascertained. A bottom-contact structure and the photolithographic processing method were used to ensure that the developed TFTs were suitable for commercial applications. Increased mobility of the modified bottom-contact structure was attributed to direct contact of the Au electrode with the active polymer layer.

Safety system for reactor container

International Nuclear Information System (INIS)

Shimizu, Miwako; Seki, Osamu; Mano, Takio.

1995-01-01

A slanted structure is formed below a reactor core where there is a possibility that molten reactor core materials are dropped, and above a water level of a pool which is formed by coolants flown from a reactor recycling system and accumulated on the inner bottom of the reactor container, to prevent molten fuels from dropping at once in the form of a large amount of lump. The molten materials are provisionally received on the structure, gradually formed into small pieces and then dropped. Further, the molten materials are dropped and received provisionally on a group of coolant-flowing pipelines below the structure, to lower the temperature of the molten materials, and then the reactor core molten materials are gradually formed into small pieces and dropped into the pool water. Since they are not dropped directly into the pool water but dropped gradually into the pool water as small droplets, occurrence of steam explosion can be reduced. The occurrence of steam explosion due to dropped molten reactor core material and pool water is suppressed, and the molten materials are kept in the pool water, thereby enabling to maintain the integrity of the reactor container more effectively. (N.H.)

In-vessel maintenance concepts for tokamak fusion reactors

International Nuclear Information System (INIS)