48 CFR 432.114 - Unusual contract financing.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Unusual contract financing... CONTRACTING REQUIREMENTS CONTRACT FINANCING Non-Commercial Item Purchase Financing 432.114 Unusual contract financing. The HCA is authorized to approve unusual contract financing. The signed determination and finding...

Development of core-shell coaxially electrospun composite PCL/chitosan scaffolds.

Science.gov (United States)

Surucu, Seda; Turkoglu Sasmazel, Hilal

2016-11-01

This study was related to combining of synthetic Poly (ε-caprolactone) (PCL) and natural chitosan polymers to develop three dimensional (3D) PCL/chitosan core-shell scaffolds for tissue engineering applications. The scaffolds were fabricated with coaxial electrospinning technique and the characterizations of the samples were done by thickness and contact angle (CA) measurements, scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-Ray Photoelectron Spectroscopy (XPS) analyses, mechanical and PBS absorption and shrinkage tests. The average inter-fiber diameter values were calculated for PCL (0.717±0.001μm), chitosan (0.660±0.007μm) and PCL/chitosan core-shell scaffolds (0.412±0.003μm), also the average inter-fiber pore size values exhibited decreases of 66.91% and 61.90% for the PCL and chitosan scaffolds respectively, compared to PCL/chitosan core-shell ones. XPS analysis of the PCL/chitosan core-shell structures exhibited the characteristic peaks of PCL and chitosan polymers. The cell culture studies (MTT assay, Confocal Laser Scanning Microscope (CLSM) and SEM analyses) carried out with L929 ATCC CCL-1 mouse fibroblast cell line proved that the biocompatibility performance of the scaffolds. The obtained results showed that the created micro/nano fibrous structure of the PCL/chitosan core-shell scaffolds in this study increased the cell viability and proliferation on/within scaffolds. Copyright © 2016 Elsevier B.V. All rights reserved.

Bio-functionalized PCL nanofibrous scaffolds for nerve tissue engineering

International Nuclear Information System (INIS)

Ghasemi-Mobarakeh, Laleh; Prabhakaran, Molamma P.; Morshed, Mohammad; Nasr-Esfahani, Mohammad Hossein; Ramakrishna, S.

2010-01-01

Surface properties of scaffolds such as hydrophilicity and the presence of functional groups on the surface of scaffolds play a key role in cell adhesion, proliferation and migration. Different modification methods for hydrophilicity improvement and introduction of functional groups on the surface of scaffolds have been carried out on synthetic biodegradable polymers, for tissue engineering applications. In this study, alkaline hydrolysis of poly (ε-caprolactone) (PCL) nanofibrous scaffolds was carried out for different time periods (1 h, 4 h and 12 h) to increase the hydrophilicity of the scaffolds. The formation of reactive groups resulting from alkaline hydrolysis provides opportunities for further surface functionalization of PCL nanofibrous scaffolds. Matrigel was attached covalently on the surface of an optimized 4 h hydrolyzed PCL nanofibrous scaffolds and additionally the fabrication of blended PCL/matrigel nanofibrous scaffolds was carried out. Chemical and mechanical characterization of nanofibrous scaffolds were evaluated using attenuated total reflectance Fourier transform infrared (ATR-FTIR) spectroscopy, contact angle, scanning electron microscopy (SEM) and tensile measurement. In vitro cell adhesion and proliferation study was carried out after seeding nerve precursor cells (NPCs) on different scaffolds. Results of cell proliferation assay and SEM studies showed that the covalently functionalized PCL/matrigel nanofibrous scaffolds promote the proliferation and neurite outgrowth of NPCs compared to PCL and hydrolyzed PCL nanofibrous scaffolds, providing suitable substrates for nerve tissue engineering.

Electric conductivity of PCl{sub 5}-ZrCl{sub 4}, PCl{sub 5}-TaCl{sub 5}, and PCl{sub 5}-MoCl{sub 5} molten mixtures; Ehlektroprovodnost` rasplavlennykh sistem PCl{sub 5}-ZrCl{sub 4}, PCl{sub 5}-TaCl{sub 5}, i PCl{sub 5}-MoCl{sub 5}

Energy Technology Data Exchange (ETDEWEB)

Salyulev, A B; Red` kin, A A; Moskalenko, N I [Inst. Vysokotemperaturnoj Ehlektrokhimii UrO RAN, Ekaterinburg (Russian Federation)

1997-05-01

When mixing individual molecular melts of PCl{sub 5} with ZrCl{sub 4}, TaCl{sub 5} or with MoCl{sub 5}, an essential (by several orders) increase in electric conductivity (up to 0.02-0.1 Ohm{sup -1}{center_dot}cm{sup -1}), which stems, in all probability, from the appearance of complex ions PCl{sub 4}{sup +}, ZrCl{sub 5}{sup -}, ZrCl{sub 6}{sup 2-}, TaCl{sub 5}{sup -} and MoCl{sub 6}{sup -} in the molten mixtures as a result of chemical interaction. 12 refs., 3 figs., 1 tab.

Strong synergistic effects in PLA/PCL blends: Impact of PLA matrix viscosity.

Science.gov (United States)

Ostafinska, Aleksandra; Fortelný, Ivan; Hodan, Jiří; Krejčíková, Sabina; Nevoralová, Martina; Kredatusová, Jana; Kruliš, Zdeněk; Kotek, Jiří; Šlouf, Miroslav

2017-05-01

Blends of two biodegradable polymers, poly(lactic acid) (PLA) and poly(ϵ-caprolactone) (PCL), with strong synergistic improvement in mechanical performance were prepared by melt-mixing using the optimized composition (80/20) and the optimized preparation procedure (a melt-mixing followed by a compression molding) according to our previous study. Three different PLA polymers were employed, whose viscosity decreased in the following order: PLC ≈ PLA1 > PLA2 > PLA3. The blends with the highest viscosity matrix (PLA1/PCL) exhibited the smallest PCL particles (d∼0.6μm), an elastic-plastic stable fracture (as determined from instrumented impact testing) and the strongest synergistic improvement in toughness (>16× with respect to pure PLA, exceeding even the toughness of pure PCL). According to the available literature, this was the highest toughness improvement in non-compatiblized PLA/PCL blends ever achieved. The decrease in the matrix viscosity resulted in an increase in the average PCL particle size and a dramatic decrease in the overall toughness: the completely stable fracture (for PLA1/PCL) changed to the stable fracture followed by unstable crack propagation (for PLA2/PCL) and finally to the completely brittle fracture (for PLA3/PCL). The stiffness of all blends remained at well acceptable level, slightly above the theoretical predictions based on the equivalent box model. Despite several previous studies, the results confirmed that PLA and PCL could behave as compatible polymers, but the final PLA/PCL toughness is extremely sensitive to the PCL particle size distribution, which is influenced by both processing conditions and PLA viscosity. PLA/PCL blends with high stiffness (due to PLA) and toughness (due to PCL) are very promising materials for medical applications, namely for the bone tissue engineering. Copyright © 2017 Elsevier Ltd. All rights reserved.

Double-bundle PCL reconstruction using autologous hamstring tendons: outcome with a minimum 2-year follow-up

Directory of Open Access Journals (Sweden)

Ricardo de Paula Leite Cury

Full Text Available ABSTRACT OBJECTIVE: To present the outcomes of posterior cruciate ligament (PCL double-bundle reconstruction using autologous hamstring tendons, with a minimum follow-up of two years. METHODS: Evaluation of 16 cases of PCL injury that underwent double-bundle reconstruction with autogenous hamstring tendons, between 2011 and 2013. The final sample consisted of 16 patients, 15 men and one woman, with a mean age of 31 years (21-49. The predominant mechanism was motorcycle accident in half of the cases. There was a mean interval of 15 months between the time of lesion and the surgery (three to 52 months. Five lesions were isolated and 11, associated. Clinical evaluation, application of validated scores, and measurements with use of the KT-1000 were performed. RESULTS: The analysis showed a mean preoperative Lysholm score of 50 points (28-87, progressing to 94 points (85-100 postoperatively. The IKDC score also demonstrated improvement. In the preoperative evaluation, four and 12 patients were respectively classified as C (abnormal and D (very unusual, and in the postoperative evaluation six as A (normal and ten as B (close to normal. In the post-operative evaluation by KT1000 arthrometer, 13 patients showed difference between 0-2 mm and 3 between 3 and 5 mm, when compared with the contralateral side. CONCLUSION: Autologous hamstring tendons are a viable option in double-bundle reconstruction of the PCL, with good clinical results in a minimum follow-up of two years.

PCL-PLLA Semi-IPN Shape Memory Polymers (SMPs): Degradation and Mechanical Properties.

Science.gov (United States)

Woodard, Lindsay N; Page, Vanessa M; Kmetz, Kevin T; Grunlan, Melissa A

2016-12-01

Thermoresponsive shape memory polymers (SMPs) based on poly(ε-caprolactone) (PCL) whose shape may be actuated by a transition temperature (T trans ) have shown utility for a variety of biomedical applications. Important to their utility is the ability to modulate mechanical and degradation properties. Thus, in this work, SMPs are formed as semi-interpenetrating networks (semi-IPNs) comprised of a cross-linked PCL diacrylate (PCL-DA) network and thermoplastic poly(l-lactic acid) (PLLA). The semi-IPN uniquely allows for requisite crystallization of both PCL and PLLA. The influence of PLLA (PCL:PLLA wt% ratio) and PCL-DA molecular weight (n) on film properties are investigated. PCL-PLLA semi-IPNs are able to achieve enhanced mechanical properties and accelerated rates of degradation. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Nanobody-functionalized PEG-b-PCL polymersomes and their targeting study.

Science.gov (United States)

Zou, Tao; Dembele, Fatimata; Beugnet, Anne; Sengmanivong, Lucie; Trepout, Sylvain; Marco, Sergio; de Marco, Ario; Li, Min-Hui

2015-11-20

We prepared and characterized polymersomes functionalized with nanobodies (VHHs) on the basis of biocompatible, biodegradable and FDA-approved poly(ethylene glycol)-block-poly(ϵ-caprolactone) (PEG-b-PCL). Fluorescein isothiocyanate (FITC) and N-beta-maleimidopropyl-oxysuccinimide ester were allowed reacting with H2N-PEG-b-PCL to produce FITC and maleimide (Mal) functionalized copolymers, Mal-PEG-b-PCL and FITC-PEG-b-PCL. A mixture of MeO-PEG-b-PCL, Mal-PEG-b-PCL and FITC-PEG-b-PCL was used to prepare polymersomes by thin film hydration and nanoprecipitation methods. Morphological studies by cryogenic transmission electron microscopy (Cryo-TEM) showed that the nanoparticles exhibited predominantly vesicular structures (polymersomes). Their mean diameters measured by dynamic light scattering were around 150 nm and the zeta-potentials around -1 mV at pH 7.4. The nanoparticles were functionalized with either anti-HER2 (VHH1) or anti-GFP (VHH2) nanobodies using maleimide-cysteine chemistry. Their particle size and zeta-potential increased slightly after nanobody-functionalization. The specific binding of VHH-functionalized polymersomes and control nanoparticles towards HER2 positive breast cancer cells was analyzed by flow cytometry and confocal microscopy. The collected results represent the first report which experimentally demonstrates that VHH1-functionalized PEO-b-PCL polymersomes can target specifically breast cancer cells expressing HER2 receptors. The detailed morphological and cell-binding studies described herein pave the way for future in vivo studies to evaluate the feasibility to use such nanoparticles for targeted drug delivery. Copyright © 2015 Elsevier B.V. All rights reserved.

Three-dimensional electrospun polycaprolactone (PCL)/alginate hybrid composite scaffolds.

Science.gov (United States)

Kim, Min Seong; Kim, GeunHyung

2014-12-19

Micro/nanofibrous scaffolds have been used widely in biomedical applications because the micro/nano-scale fibres resemble natural extracellular matrix and the high surface-to-volume ratio encourages cellular activities (attachment and proliferation). However, poor mechanical properties, low controllability of various shapes and difficulties in obtaining controllable pore structure have been obstacles to their use in hard-tissue regeneration. To overcome these shortcomings, we suggest a new composite system, which uses a combination method of wet electrospinning, rapid prototyping and a physical punching process. Using the process, we obtained polycaprolactone (PCL)/alginate composite scaffolds, consisting of electrospun PCL/alginate fibres and micro-sized PCL struts, with mean pore sizes of 821 ± 55 μm. To show the feasibility of the scaffolds for hard-tissue regeneration, the scaffolds were assessed not only for physical properties, including hydrophilicity, water absorption, and tensile and compressive strength, but also in vitro cellular responses (cell viability and proliferation) and osteogenic differentiation (alkaline phosphatase (ALP) activity, and mineralisation) by culturing with pre-osteoblasts (MC3T3-E1 cells). With the reinforcing micro-sized PCL struts, the elastic modulus of the PCL/alginate scaffold was significantly improved versus a pure PCL scaffold. Additionally, due to the alginate component in the fibrous scaffold, they showed significantly enhanced hydrophilic behaviour, water absorption (∼8-fold) and significant biological activities (∼1.6-fold for cell viability at 7 days, ∼2.3-fold for ALP activity at 14 days and ∼6.4-fold for calcium mineralisation at 14 days) compared with those of a pure PCL fibrous scaffold. Copyright © 2014 Elsevier Ltd. All rights reserved.

Thermal, mechanical and morphological behavior of starch thermoplastic (TPS) and polycaprolactone (PCL)

International Nuclear Information System (INIS)

Campos, Adriana de; Marconcini, Jose M.; Mattoso, Luiz H.C.

2011-01-01

Thermal, mechanical and morphological properties of thermoplastic starch (TPS) and polycaprolactone (PCL) blend obtained by extrusion was studied. The results showed that TPS/PCL blends are immiscible, however it is suggested some interaction in the interphase between TPS and PCL as observed by crystallinity decrease of the blend. The PCL addition in the TPS improves the properties and decreases the cost of the blend. (author)

Use of the V-sign in the diagnosis of bucket-handle meniscal tear of the knee

Energy Technology Data Exchange (ETDEWEB)

Rao, Nisha [Radiology Associates of Tampa, Tampa, FL (United States); Patel, Yogita [Jamaica Hospital Medical Center, Jamaica, NY (United States); Opsha, Oleg; Eisemon, Eric; Beltran, Javier [Maimonides Medical Center, Brooklyn, NY (United States); Chen, Qi [SUNY Downstate Medical Center, Department of Radiology, Brooklyn, NY (United States); Owen, Joshua [Saint Louis University School of Medicine, Department of Radiology, St. Louis, MO (United States); Fogel, Joshua [Brooklyn College of the City University of New York, Department of Economics, Brooklyn, NY (United States)

2012-03-15

Bucket-handle tear is a displaced vertical longitudinal tear of the meniscus. Several signs of the tear have been described on MRI but none in the axial plane. We propose to describe such a sign named the V-sign that is seen at the junction of the displaced fragment and the meniscus, which is in place. MRI imaging of 25 surgically proven bucket-handle tears was reviewed for presence of the V-sign. Two control groups, one with normal menisci (n = 75) and one with surgically proven non-bucket-handle tears (n = 25), were also evaluated. Comparisons for presence or absence of the V-sign were performed among the three groups, and also for other commonly associated signs such as double PCL sign, double delta sign, and presence of ACL tear. Also, sensitivity, specificity, and positive and negative predictive values were calculated. Among those with bucket-handle tear, 72% demonstrated the V-sign while no participant in either control group had the V-sign (P {<=} 0.001). The V-sign occurred in 38% of those with double PCL sign, 55.6% with ACL tear, and 66.7% with double delta sign. The V-sign had higher sensitivity and negative predictive values than other signs related to bucket-handle tear. The V-sign, when seen on an axial plane image, is highly suggestive of bucket-handle tear. Our data suggest the benefit of using the V-sign for detecting bucket-handle tears, perhaps even above other commonly used approaches. (orig.)

Use of the V-sign in the diagnosis of bucket-handle meniscal tear of the knee

International Nuclear Information System (INIS)

Rao, Nisha; Patel, Yogita; Opsha, Oleg; Eisemon, Eric; Beltran, Javier; Chen, Qi; Owen, Joshua; Fogel, Joshua

2012-01-01

Bucket-handle tear is a displaced vertical longitudinal tear of the meniscus. Several signs of the tear have been described on MRI but none in the axial plane. We propose to describe such a sign named the V-sign that is seen at the junction of the displaced fragment and the meniscus, which is in place. MRI imaging of 25 surgically proven bucket-handle tears was reviewed for presence of the V-sign. Two control groups, one with normal menisci (n = 75) and one with surgically proven non-bucket-handle tears (n = 25), were also evaluated. Comparisons for presence or absence of the V-sign were performed among the three groups, and also for other commonly associated signs such as double PCL sign, double delta sign, and presence of ACL tear. Also, sensitivity, specificity, and positive and negative predictive values were calculated. Among those with bucket-handle tear, 72% demonstrated the V-sign while no participant in either control group had the V-sign (P ≤ 0.001). The V-sign occurred in 38% of those with double PCL sign, 55.6% with ACL tear, and 66.7% with double delta sign. The V-sign had higher sensitivity and negative predictive values than other signs related to bucket-handle tear. The V-sign, when seen on an axial plane image, is highly suggestive of bucket-handle tear. Our data suggest the benefit of using the V-sign for detecting bucket-handle tears, perhaps even above other commonly used approaches. (orig.)

Pcl/Chitosan Blended Nanofibrous Tubes Made by Dual Syringe Electrospinning

Directory of Open Access Journals (Sweden)

Hild Martin

2015-03-01

Full Text Available 3D tubular scaffolds made from Poly-(Ɛ-caprolactone (PCL/chitosan (CS nanofibres are very promising candidate as vascular grafts in the field of tissue engineering. In this work, the fabrication of PCL/CS-blended nanofibrous tubes with small diameters by electrospinning from separate PCL and CS solutions is studied. The influence of different CS solutions (CS/polyethylene glycol (PEO/glacial acetic acid (AcOH, CS/trifluoroacetic acid (TFA, CS/ AcOH on fibre formation and producibility of nanofibrous tubes is investigated. Attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR is used to verify the presence of CS in the blended samples. Tensile testing and pore size measurements are done to underline the good prerequisites of the fabricated blended PCL/ CS nanofibrous tubes as potential scaffolds for vascular grafts. Tubes fabricated from the combination of PCL and CS dissolved in AcOH possesses properties, which are favourable for future cell culture studies.

Biodegradable polycaprolactone (PCL) nanosphere encapsulating superoxide dismutase and catalase enzymes.

Science.gov (United States)

Singh, Sushant; Singh, Abhay Narayan; Verma, Anil; Dubey, Vikash Kumar

2013-12-01

Biodegradable polycaprolactone (PCL) nanosphere encapsulating superoxide dismutase (SOD) and catalase (CAT) were successfully synthesized using double emulsion (w/o/w) solvent evaporation technique. Characterization of the nanosphere using dynamic light scattering, field emission scanning electron microscope, and Fourier transform infrared spectroscopy revealed a spherical-shaped nanosphere in a size range of 812 ± 64 nm with moderate protein encapsulation efficiency of 55.42 ± 3.7 % and high in vitro protein release. Human skin HaCat cells were used for analyzing antioxidative properties of SOD- and CAT-encapsulated PCL nanospheres. Oxidative stress condition in HaCat cells was optimized with exposure to hydrogen peroxide (H2O2; 1 mM) as external stress factor and verified through reactive oxygen species (ROS) analysis using H2DCFDA dye. PCL nanosphere encapsulating SOD and CAT together indicated better antioxidative defense against H2O2-induced oxidative stress in human skin HaCat cells in comparison to PCL encapsulating either SOD or CAT alone as well as against direct supplement of SOD and CAT protein solution. Increase in HaCat cells SOD and CAT activities after treatment hints toward uptake of PCL nanosphere into the human skin HaCat cells. The result signifies the role of PCL-encapsulating SOD and CAT nanosphere in alleviating oxidative stress.

Coaxial PCL/PVA electrospun nanofibers: osseointegration enhancer and controlled drug release device

International Nuclear Information System (INIS)

Song, Wei; Shi, Tong; Ren, Weiping; Yu, Xiaowei; Markel, David C

2013-01-01

The failure of prosthesis after total joint replacement is mainly due to dysfunctional osseointegration and implant infection. There is a critical need for orthopedic implants that promote rapid osseointegration and prevent bacterial colonization, particularly when placed in bone compromised by disease or physiology of the patients. The aim of this study was to fabricate a novel coaxial electrospun polycaprolactone (PCL)/polyvinyl alcohol (PVA) core-sheath nanofiber (NF) blended with both hydroxyapatite nanorods (HA) and type I collagen (Col) (PCL Col /PVA HA ). Doxycycline (Doxy) and dexamethasone (Dex) were successfully incorporated into the PCL Col /PVA HA NFs for controlled release. The morphology, surface hydrophilicity and mechanical properties of the PCL/PVA NF mats were analyzed by scanning electron microscopy, water contact angle and atomic force microscopy. The PCL Col /PVA HA NFs are biocompatible and enhance the adhesion and proliferation of murine pre-osteoblastic MC3T3 cells. The release of Doxy and Dex from coaxial PCL Col /PVA HA NFs showed more controlled release compared with the blended NFs. Using an ex vivo porcine bone implantation model we found that the PCL Col /PVA HA NFs bind firmly on the titanium rod surface and the NFs coating remained intact on the surface of titanium rods after pullout. No disruption or delamination was observed after the pullout test. These findings indicate that PCL Col /PVA HA NFs encapsulating drugs have great potential in enhancing implant osseointegration and preventing implant infection. (paper)

Coaxial PCL/PVA electrospun nanofibers: osseointegration enhancer and controlled drug release device.

Science.gov (United States)

Song, Wei; Yu, Xiaowei; Markel, David C; Shi, Tong; Ren, Weiping

2013-09-01

The failure of prosthesis after total joint replacement is mainly due to dysfunctional osseointegration and implant infection. There is a critical need for orthopedic implants that promote rapid osseointegration and prevent bacterial colonization, particularly when placed in bone compromised by disease or physiology of the patients. The aim of this study was to fabricate a novel coaxial electrospun polycaprolactone (PCL)/polyvinyl alcohol (PVA) core-sheath nanofiber (NF) blended with both hydroxyapatite nanorods (HA) and type I collagen (Col) (PCL(Col)/PVA(HA)). Doxycycline (Doxy) and dexamethasone (Dex) were successfully incorporated into the PCL(Col)/PVA(HA) NFs for controlled release. The morphology, surface hydrophilicity and mechanical properties of the PCL/PVA NF mats were analyzed by scanning electron microscopy, water contact angle and atomic force microscopy. The PCL(Col)/PVA(HA) NFs are biocompatible and enhance the adhesion and proliferation of murine pre-osteoblastic MC3T3 cells. The release of Doxy and Dex from coaxial PCL(Col)/PVA(HA) NFs showed more controlled release compared with the blended NFs. Using an ex vivo porcine bone implantation model we found that the PCL(Col)/PVA(HA) NFs bind firmly on the titanium rod surface and the NFs coating remained intact on the surface of titanium rods after pullout. No disruption or delamination was observed after the pullout test. These findings indicate that PCL(Col)/PVA(HA) NFs encapsulating drugs have great potential in enhancing implant osseointegration and preventing implant infection.

Morphology of Poly lactide/Polycaprolactone (PLA/PCL) Nano composite by Scanning Electron Microscopy (SEM)

International Nuclear Information System (INIS)

Siti Zulaiha Hairaldin; Wan Md Zin Wan Yunus; Norazowa Ibrahim

2011-01-01

In this study, Octadecylamine Modified Montmorillonites (ODAMMT) were used to prepare Poly lactide/ Polycaprolactone (PLA/ PCL) nano composites. PLA and PCL mix in 90:10 ratios, using an internal mixer by melt blending technique. The other sample was blend with Natrium Montmorillonite (NaMMT) and Octadecylamine Modified Montmorillonite (ODA-MMT) to produce PLA/ PCL-NaMMT and PLA/ PCL ODAMMT. To characterize the polymer nano composites, X-ray diffraction (XRD), FTIR and SEM analysis were conducted. Comparison of morphology were made up between PLA/ PCL, PLA/ PCL with presence of 7 % of Na-MMT and 7 % ODA-MMT respectively based on SEM micrograph by calculate the number-average diameter. (author)

Biodegradação de filmes de PP/PCL em solo e solo com chorume Study of biodegradation of PP/PCL films in soil and soil with leachate landfill

Directory of Open Access Journals (Sweden)

Adriana de Campos

2010-01-01

Full Text Available Filmes de blenda de poli(ε-caprolactona (PCL e polipropileno (PP foram obtidos por moldagem por compressão. O estudo da biodegradação de filmes de blendas de PP/PCL em solo e solo com chorume foi obtido pela evolução de CO2, perda de massa, ângulo de contato, microscopia eletrônica de varredura (MEV e calorimetria exploratória diferencial (DSC. As análises de evolução de CO2 mostraram que a biodegradação da blenda de PP/PCL em solo com chorume foi maior que a dos homopolímeros, sugerindo que os polímeros na blenda são mais suscetíveis à degradação, o que se deve à não interação entre PP e PCL. Os resultados também mostraram que os microrganismos do solo com chorume provocaram uma erosão superficial. Verificou-se que a biodegradação do PCL é inibida pelos microrganismos do chorume adicionados no solo.Blend films of polycaprolactone (PCL and polypropylene (PP have been obtained by melt-pressing of both components. The biodegradation of PP/PCL blend films in soil and soil with leachate landfill has been assessed with measurements of evolution of CO2, weight loss, contact angle, scanning electronic microscopy (SEM and differential scanning calorimetry (DSC. The respirometric tests showed that the PP/PCL biodegradation in the soil with leachate was higher than the homopolymers, suggesting that the polymers in the blend are more susceptible to biodegradation owing to the lack of interaction between PP and PCL. The results also showed that biodegradation due to microorganisms in the soil with leachate occurred by surface erosion. It was found that the PCL biodegradation is inhibited by the leachate microorganisms added in the soil.

Preparation of bioactive porous HA/PCL composite scaffolds

Energy Technology Data Exchange (ETDEWEB)

Zhao, J.; Guo, L.Y.; Yang, X.B. [Key Laboratory of Advanced Technologies of Materials (Ministry of Education), School of Materials Science and Engineering, Southwest Jiaotong University, Chengdu 610031 (China); Weng, J. [Key Laboratory of Advanced Technologies of Materials (Ministry of Education), School of Materials Science and Engineering, Southwest Jiaotong University, Chengdu 610031 (China)], E-mail: jweng@swjtu.cn

2008-12-30

Porous hydroxyapatite (HA) bioceramic scaffold has been widely attracted the attention to act as a three-dimensional (3D) template for cell adhesion, proliferation, differentiation and thus promoting bone and cartilage regeneration because of its osteoinduction. However, the porous bioceramic scaffold is fragile so that it is not suitable to be applied in clinic for bone repair or replacement. Therefore, it is significant to improve the mechanical property of porous HA bioceramics while the interconnected structure is maintained for tissue ingrowth in vivo. In the present research, a porous composite scaffold composed of HA scaffold and polycaprolactone (PCL) lining was fabricated by the method of polymer impregnating to produce HA scaffold coated with PCL lining. Subsequently, the composite scaffolds were deposited with biomimetic coating for improving the bioactivity. The HA/PCL composite scaffolds with improved mechanical property and bioactivity is expected to be a promising bone substitute in tissue engineering applications.

Preparation of bioactive porous HA/PCL composite scaffolds

International Nuclear Information System (INIS)

Zhao, J.; Guo, L.Y.; Yang, X.B.; Weng, J.

2008-01-01

Porous hydroxyapatite (HA) bioceramic scaffold has been widely attracted the attention to act as a three-dimensional (3D) template for cell adhesion, proliferation, differentiation and thus promoting bone and cartilage regeneration because of its osteoinduction. However, the porous bioceramic scaffold is fragile so that it is not suitable to be applied in clinic for bone repair or replacement. Therefore, it is significant to improve the mechanical property of porous HA bioceramics while the interconnected structure is maintained for tissue ingrowth in vivo. In the present research, a porous composite scaffold composed of HA scaffold and polycaprolactone (PCL) lining was fabricated by the method of polymer impregnating to produce HA scaffold coated with PCL lining. Subsequently, the composite scaffolds were deposited with biomimetic coating for improving the bioactivity. The HA/PCL composite scaffolds with improved mechanical property and bioactivity is expected to be a promising bone substitute in tissue engineering applications

Preserving the PCL during the tibial cut in total knee arthroplasty.

Science.gov (United States)

Cinotti, G; Sessa, P; Amato, M; Ripani, F R; Giannicola, G

2017-08-01

Previous studies have shown that the PCL insertion may be damaged during the tibial cut performed in total knee arthroplasty. We investigated the maximum thickness of a tibial cut that preserves the PCL insertion and to what extent the posterior slope of the tibial cut and that of the patient's tibial plateaus affect the outcome. MR images of 83 knees were analysed. The maximum thickness of a tibial cut that preserves the PCL using a posterior slope of 0°, 3°, 5° and parallel to the patient's slope of the tibial plateau, was evaluated. Correlations between the results and the degrees of the posterior slope of the patient's tibial plateaus were also investigated. The maximum thickness of a tibial cut that preserves the entire PCL insertion was, on average, 5.5, 4.7, 4.2 and 3.1 mm when a posterior slope of 0°, 3°, 5° and parallel to the patients' tibial plateaus was used, respectively. When the 25th percentile was considered, the maximum thickness of a tibial cut that preserved the PCL was 4 and 3 mm with a tibial cut of 0° and 5° of posterior slope, respectively. The maximum thickness of a tibial cut that preserved the PCL was significantly greater in patients with a sagittal slope of the tibial plateaus more than 8° than in those with a sagittal slope less than 8°. In cruciate retaining implants, the PCL insertion may be spared in the majority of patients by performing a tibial cut of 4 mm, or even less when a posterior slope of 3°-5° is used. The clinical relevance of our study is that the execution of a conservative tibial cut, followed by a second tibial resection to achieve the thickness required for the tibial component to be implanted, may be an alternative technique to spare the PCL in CR TKA. II.

Guided-Inquiry Experiments for Physical Chemistry: The POGIL-PCL Model

Science.gov (United States)

Hunnicutt, Sally S.; Grushow, Alexander; Whitnell, Robert

2015-01-01

The POGIL-PCL project implements the principles of process-oriented, guided-inquiry learning (POGIL) in order to improve student learning in the physical chemistry laboratory (PCL) course. The inquiry-based physical chemistry experiments being developed emphasize modeling of chemical phenomena. In each experiment, students work through at least…

Processing and Properties of PCL/Cotton Linter Compounds

OpenAIRE

Bezerra,Elieber Barros; França,Danyelle Campos; Morais,Dayanne Diniz de Souza; Rosa,Morsyleide de Freitas; Morais,João Paulo Saraiva; Araújo,Edcleide Maria; Wellen,Renate Maria Ramos

2017-01-01

Biodegradable compounds of poly(ε-caprolactone) (PCL)/ cotton linter were melting mixed with filling content ranging from 1% to 5% w/w. Cotton linter is an important byproduct of textile industry; in this work it was used in raw state and after acid hydrolysis. According to the results of torque rheometry no decaying of viscosity took place during compounding, evidencing absence of breaking down in molecular weight. The thermal stability increased by 20% as observed in HDT for PCL/cotton...

Data of PCL-b-P(MMA-DMAEMA2 characterization and related assays

Directory of Open Access Journals (Sweden)

Camila Franco

2017-12-01

Full Text Available The data presented here are related to the research paper entitled “PCL-b-P(MMA-co-DMAEMA2 new triblock copolymer for novel pH-sensitive nanocapsules intended for drug delivery to tumors” by Franco et al. [1]. Characterization data of PCL-diol, macroinitiator Br-PCL-Br, homopolymers (PMMA and PDMAEMA and copolymers (batch 1 and batch 2 analyzed by FTIR, SEC and NMR, as well as, characterization of PCL-NS formulation by laser diffraction and DLS analysis, initial nanocapsule formulations and 1C-NC and 2C-NC formulations, including hydrodynamic diameter at different pH media, and DMSO cytotoxicity. Keywords: Methacrylic copolymer, Polycaprolactone, Nanocapsules, pH-sensitive, Cell viability

Maltose conjugation to PCL: Advanced structural characterization and preliminary biological properties

Science.gov (United States)

Secchi, Valeria; Guizzardi, Roberto; Russo, Laura; Pastori, Valentina; Lecchi, Marzia; Franchi, Stefano; Iucci, Giovanna; Battocchio, Chiara; Cipolla, Laura

2018-05-01

The emerging trends in regenerative medicine rely among others on biomaterial-based therapies, with the use of biomaterials as a central delivery system for biochemical and physical cues to manipulate transplanted or ingrowth cells and to orchestrate tissue regeneration. Cell adhesion properties of a biomaterial strongly depend on its surface characteristics. Among others poly(ε-caprolactone) (PCL) is a biocompatible and biodegradable material with low cytotoxicity that is widely adopted as synthetic polymer in several applications. However, it is hydrophobic, which limits its use in tissue engineering. In order to improve its hydrophilicity and cellular compatibility, PCL surface was grafted with maltose through a two-step procedure in which controlled aminolysis of PCL ester bonds by hexanediamine was followed by reductive amination with the carbohydrate reducing end. The modified PCL surface was then characterized in detail by x-ray Photoelectron Spectroscopy (XPS) and Near Edge x-ray Absorption Fine Structure (NEXAFS) spectroscopies. In addition, the biocompatibility of the proposed biomaterial was investigated in preliminary biological assays.

Development of a Spirulina Extract/Alginate-Imbedded PCL Nanofibrous Cosmetic Patch.

Science.gov (United States)

Byeon, Seon Yeong; Cho, Myung Kwon; Shim, Kyou Hee; Kim, Hye Jin; Song, Hyeon Gi; Shin, Hwa Sung

2017-09-28

Cosmetic patches have recently been developed as skin products for personal care owing to rapid advances in the technology of delivery of active ingredients, moisture, and adhesiveness to skin. Alginate and Spirulina are typical marine resources used in cosmetic products. This research involved the development of a Spirulina extract-impregnated alginate nanofiber cosmetic patch supported by a polycaprolactone (PCL) nanofiber cover ( Spi /Alg-PCL NF patch). In addition to the ability of alginate to affect moisture and adhesiveness to skin, the impregnation of Spirulina extract strengthened those abilities as well as its own bioactive effectiveness. All fabrication processing steps were undertaken in aqueous solution. The three components (alginate, Spirulina extract, and PCL) had no detected cytotoxicity in human keratinocyte cell-based examination. In addition, wetting the pre-dried patch on the skin resulted in the Spirulina extract being released within 30 min. The results indicate the excellence of the Spi /Alg-PCL NF patch as a skin-care cosmetic device.

MR imaging of meniscal bucket-handle tears: a review of signs and their relation to arthroscopic classification

International Nuclear Information System (INIS)

Aydingoez, Uestuen; Firat, Ahmet K.; Atay, Ahmet Oe.; Doral, Nedim M.

2003-01-01

Our objective was to review the MR imaging signs of meniscal bucket-handle tears and assess the relevance of these signs to the arthroscopic classification of displaced meniscal tears. Forty-five menisci in 42 patients who had a diagnosis of bucket-handle tear either on MR imaging or on subsequent arthroscopy (in which Dandy's classification of meniscal tears was used) were retrospectively analyzed for MR imaging findings of double posterior cruciate ligament (PCL), fragment within the intercondylar notch, absent bow tie, flipped meniscus, double-anterior horn, and disproportional posterior horn signs. Arthroscopy, which was considered as the gold standard, revealed 41 bucket-handle tears (either diagnosed or not diagnosed by MR imaging) in 38 patients (33 males, 5 females). There was a stastistically significant male preponderance for the occurrence of meniscal bucket-handle tears. Overall, sensitivity and positive predictive value of MR imaging for the detection of meniscal bucket-handle tears were calculated as 90%. Common MR imaging signs of meniscal bucket-handle tears in arthroscopically proven cases of such tears were the fragment in the notch and absent bow tie signs (98% frequency for each). Double-PCL, flipped meniscus, double-anterior horn, and disproportional posterior horn signs, however, were less common (32, 29, 29, and 27%, respectively). An arthroscopically proven bucket-handle tear was found in all patients who displayed at least three of the six MR imaging signs of meniscal bucket-handle tears. The presence of three or more MR imaging signs of meniscal bucket-handle tears is highly suggestive of this condition. (orig.)

Preparation of novel functional Mg/O/PCL/ZnO composite biomaterials and their corrosion resistance

International Nuclear Information System (INIS)

Xi, Zhongxian; Tan, Cui; Xu, Lan; Yang, Na; Li, Qing

2015-01-01

Highlights: • Novel functional Mg/O/PCL/ZnO composite biomaterials were prepared. • The biomaterials were prepared by anodization treatment and dip-coating technique. • The composite biomaterials were smooth and with low porosity. • The prepared biomaterials have good corrosion resistance in SBF. • The composite biomaterials can release zinc ion to promote bone formation. - Abstract: In this study, novel and functional Mg/O/PCL/ZnO (magnesium/anodic film/poly(ε-caprolactone)/zinc oxide) composite biomaterials for enhancing the bioactivity and biocompatibility of the implant was prepared by using anodization treatment and dip-coating technique. The surface morphology, microstructure, adhesion strength and corrosion resistance of the composite biomaterials were investigated using scanning electron microscopy (SEM), adhesion measurements, electrochemical tests and immersion tests respectively. In addition, the biocompatible properties of Mg (magnesium), Mg/PCL (magnesium/poly(ε-caprolactone)) and Mg/O/PCL (magnesium/anodic film/poly(ε-caprolactone)) samples were also investigated. The results show that the Mg/O/PCL/ZnO composite biomaterials were with low porosity and with the ZnO powders dispersed in PCL uniformly. The adhesion tests suggested that Mg/O/PCL/ZnO composite biomaterials had better adhesion strength than that of Mg/PCL composite biomaterials obviously. Besides, an in vitro test for corrosion demonstrated that the Mg/O/PCL/ZnO composite biomaterials had good corrosion resistance and zinc ion was released obviously in SBF

Fabrication and characterization of PCL/gelatin composite nanofibrous scaffold for tissue engineering applications by electrospinning method

International Nuclear Information System (INIS)

Gautam, Sneh; Dinda, Amit Kumar; Mishra, Narayan Chandra

2013-01-01

In the present study, composite nanofibrous tissue engineering-scaffold consisting of polycaprolactone and gelatin, was fabricated by electrospinning method, using a new cost-effective solvent mixture: chloroform/methanol for polycaprolactone (PCL) and acetic acid for gelatin. The morphology of the nanofibrous scaffold was investigated by using field emission scanning electron microscopy (FE-SEM) which clearly indicates that the morphology of nanofibers was influenced by the weight ratio of PCL to gelatin in the solution. Uniform fibers were produced only when the weight ratio of PCL/gelatin is sufficiently high (10:1). The scaffold was further characterized by Fourier transform infrared (FT-IR) spectroscopy, thermogravimetric (TG) analysis, and X-ray diffraction (XRD). FT-IR and TG analysis indicated some interactions between PCL and gelatin molecules within the scaffold, while XRD results demonstrated crystalline nature of PCL/gelatin composite scaffold. Cytotoxicity effect of scaffold on L929 mouse fibroblast cells was evaluated by MTT assay and cell proliferation on the scaffold was confirmed by DNA quantification. Positive results of MTT assay and DNA quantification L929 mouse fibroblast cells indicated that the scaffold made from the combination of natural polymer (gelatin) and synthetic polymer (PCL) may serve as a good candidate for tissue engineering applications. - Highlights: ► PCL/Gelatin scaffold was successfully fabricated by electrospinning method. ► PCL in CHCl 3 /CH 3 OH and gelatin in acetic acid: a novel polymer-solvent system. ► The morphology of nanofibers was influenced by the weight ratio of PCL/gelatin. ► Chemical interactions between PCL and gelatin molecules enhanced cell growth. ► Cell culture studies indicate the suitability of scaffold for tissue regeneration

Graphite nanoplatelets-modified PLA/PCL: Effect of blend ratio and nanofiller localization on structure and properties.

Science.gov (United States)

Kelnar, Ivan; Kratochvíl, Jaroslav; Kaprálková, Ludmila; Zhigunov, Alexander; Nevoralová, Martina

2017-07-01

Structure and properties of poly(lactic acid) (PLA)/poly (ɛ-caprolactone) (PCL) influenced by graphite nanoplatelets (GNP) were studied in dependence on blend composition. Electron microscopy indicates predominant localization of GNP in PCL. GNP-induced changes in viscosity hinder refinement of PCL inclusions, support PCL continuity in the co-continuous system, and lead to reduction of PLA inclusions size without GNP being present at the interface in the PCL-matrix blend. Negligible differences in crystallinity of both phases indicate that mechanical behaviour is mainly influenced by reinforcement and GNP-induced changes in morphology. Addition of 5 parts of GNP leads to ~40% and ~25% increase of stiffness in the PCL- and PLA-matrix systems, respectively, whereas the reinforcing effect is practically eliminated in the co-continuous systems due to GNP-induced lower continuity of PLA which enhances toughness. Impact resistance of the 80/20 blend shows increase with 5 parts content due to synergistic effect of PCL/GNP stacks, whereas minor increase in the blend of the ductile PCL matrix with brittle PLA inclusions is caused by GNP-modification of the component parameters. Results indicate high potential of GNP in preparing biocompatible systems with wide range of structure and properties. Copyright © 2017 Elsevier Ltd. All rights reserved.

Comparison between PCL/hydroxyapatite (HA) and PCL/halloysite nanotube (HNT) composite scaffolds prepared by co-extrusion and gas foaming.

Science.gov (United States)

Jing, Xin; Mi, Hao-Yang; Turng, Lih-Sheng

2017-03-01

In this work, three-dimensional poly(caprolactone) (PCL) tissue engineering scaffolds were prepared by co-extrusion and gas foaming. Biocompatible hydroxyapatite (HA) and halloysite nanotubes (HNT) were added to the polymer matrix to enhance the mechanical properties and bioactivity of the composite scaffolds. The effects of HA and HNT on the rheological behavior, microstructure, and mechanical properties of the composite scaffolds were systematically compared. It was found that the HNT improved viscosity more significantly than HA, and reduced the pore size of scaffolds, while the mechanical performance of PCL/HNT scaffolds was higher than PCL/HA scaffolds with the same filler content. Human mesenchymal stem cells (hMSCs) were used as the cell model to compare the biological properties of two composite scaffolds. The results demonstrated that cells could survive on all scaffolds, and showed a more flourishing living state on the composite scaffolds. The cell differentiation for 5% HA and 1% HNT scaffolds were significantly higher than other scaffolds, while the differentiation of 5% HNT scaffolds was lower than that of 1% HNT scaffolds mainly because of the reduced pore size and pore interconnectivity. Therefore, this study suggested that, with proper filler content and control of microstructure through processing, HNT could be a suitable substitute for HA for bone tissue engineering to reduce the cost and improve mechanical performance. Copyright © 2016. Published by Elsevier B.V.

Active Bilayer PE/PCL Films for Food Packaging Modified with Zinc Oxide and Casein

Directory of Open Access Journals (Sweden)

Ana Rešček

2015-12-01

Full Text Available This paper studies the properties of active polymer food packaging bilayer polyethylene/polycaprolactone (PE/PCL films. Such packaging material consists of primary PE layer coated with thin film of PCL coating modified with active component (zinc oxide or zinc oxide/casein complex with intention to extend the shelf life of food and to maintain the quality and health safety. The influence of additives as active components on barrier, mechanical, thermal and antimicrobial properties of such materials was studied. The results show that, in comparison to the neat PE and PE/PCL films, some of PE/PCL bilayer films with additives exhibit improved barrier properties i.e. decreased water vapour permeability. Higher thermal stability of modified PE/PCL material is obtained due to a modified mechanism of thermal degradation. The samples with the additive nanoparticles homogeneously dispersed in the polymer matrix showed good mechanical properties. Addition of higher ZnO content contributes to the enhanced antibacterial activity of a material.

Surface chemistry of PH 3, PF 3 and PCl 3 on Ru(0001)

Science.gov (United States)

Tao, H.-S.; Diebold, U.; Shinn, N. D.; Madey, T. E.

1994-06-01

The adsorption, desorption and decomposition of PH 3, PF 3 and PCl 3 on Ru(0001) have been studied by soft X-ray photoelectron spectroscopy (SXPS) using synchrotron radiation. Due to large chemical shifts in the P 2p core levels, different phosphorus containing surface species can be identified. We find that PF 3 adsorbs molecularly on Ru(0001) at 80 and 300 K. At 80 K, PH 3 saturates the surface with one layer of atomic hydrogen, elemental phosphorus, subhydride (i.e., PHx (0 PH 3, with a total phosphorus coverage of 0.4 ML. At 300 K, PH 3 decomposes into atomic hydrogen and elemental phosphorus with a phosphorus coverage of 0.8 ML. At 80 K, PCl 3 adsorbs dissociatively into atomic chlorine, elemental phosphorus, PCl and possibly PCl 2 and PCl 3 in the first monolayer. Formation of multilayers of PCl 3 is observed at 80 K. At 300 K, PCl 3 adsorbs dissociatively as atomic chlorine and elemental phosphorus with a saturation phosphorus coverage of 0.1 ML. The variation in total phosphorus uptake at 300 K from PX3 ( X = H, FandCl) adsorption is a result of competition between site blocking by dissociation fragments and displacement reactions. Annealing surfaces with adsorbed phosphorus to 1000 K results in formation of RuzP ( z = 1 or 2), which is manifested by the chemical shifts in the P2p core level, as well as the P LVV Auger transition. The recombination of adsorbed phosphorus and adsorbed X ( = H, FandCl) from decomposition is also observed, but is a minor reaction channel on the surface. Thermochemical data are used to analyze the different stabilities of PX 3 at 300 K, namely, PF 3 adsorbs molecularly and PH 3 and PCl 3 dissociate completely. First, we compare the heat of molecular adsorption and the heat of dissociative adsorption of PX 3 on Ru(0001), using an enthalpy approach, and find results consistent with experimental observations. Second, we compare the total bond energy difference between molecular adsorption and complete dissociation of PX 3 on Ru

Pharmacokinetics and in vivo delivery of curcumin by copolymeric mPEG-PCL micelles.

Science.gov (United States)

Kheiri Manjili, Hamidreza; Ghasemi, Parisa; Malvandi, Hojjat; Mousavi, Mir Sajjad; Attari, Elahe; Danafar, Hossein

2017-07-01

Curcumin (CUR) has been associated with anti-inflammatory, antimicrobial, antioxidant, anti-amyloid, and antitumor effects, but its application is limited because of its low aqueous solubility and poor oral bioavailability. To progress the bioavailability and water solubility of CUR, we synthesized five series of mono methoxy poly (ethylene glycol)-poly (ε-caprolactone) (mPEG-PCL) diblock copolymers. The structure of the copolymers was characterized by H NMR, FTIR, DSC and GPC techniques. In this study, CUR was encapsulated within micelles through a single-step nano-precipitation method, leading to formation of CUR-loaded mPEG-PCL (CUR/mPEG-PCL) micelles. The resulting micelles were characterized further by various techniques such as dynamic light scattering (DLS) and atomic force microscopy (AFM). The cytotoxicity of void CUR, mPEG-PCL and CUR/mPEG-PCL micelles was compared to each other by performing MTT assay of the treated MCF-7 and 4T1 cell line. Study of the in vivo pharmacokinetics of the CUR-loaded micelles was also carried out on selected copolymers in comparison with CUR solution formulations. The results showed that the zeta potential of CUR-loaded micelles was about -11.5mV and the average size was 81.0nm. CUR was encapsulated into mPEG-PCL micelles with loading capacity of 20.65±0.015% and entrapment efficiency of 89.32±0.34%. The plasma AUC (0-t), t 1/2 and C max of CUR micelles were increased by 52.8, 4.63 and 7.51-fold compared to the CUR solution, respectively. In vivo results showed that multiple injections of CUR-loaded micelles could prolong the circulation time and increase the therapeutic efficacy of CUR. These results suggested that mPEG-PCL micelles would be a potential carrier for CUR. Copyright © 2016 Elsevier B.V. All rights reserved.

PEG-b-PCL polymeric nano-micelle inhibits vascular angiogenesis by activating p53-dependent apoptosis in zebrafish.

Science.gov (United States)

Zhou, Tian; Dong, Qinglei; Shen, Yang; Wu, Wei; Wu, Haide; Luo, Xianglin; Liao, Xiaoling; Wang, Guixue

Micro/nanoparticles could cause adverse effects on cardiovascular system and increase the risk for cardiovascular disease-related events. Nanoparticles prepared from poly(ethylene glycol) (PEG)- b -poly( ε -caprolactone) (PCL), namely PEG- b -PCL, a widely studied biodegradable copolymer, are promising carriers for the drug delivery systems. However, it is unknown whether polymeric PEG- b -PCL nano-micelles give rise to potential complications of the cardiovascular system. Zebrafish were used as an in vivo model to evaluate the effects of PEG- b -PCL nano-micelle on cardiovascular development. The results showed that PEG- b -PCL nano-micelle caused embryo mortality as well as embryonic and larval malformations in a dose-dependent manner. To determine PEG- b -PCL nano-micelle effects on embryonic angiogenesis, a critical process in zebrafish cardiovascular development, growth of intersegmental vessels (ISVs) and caudal vessels (CVs) in flk1-GFP transgenic zebrafish embryos using fluorescent stereomicroscopy were examined. The expression of fetal liver kinase 1 (flk1), an angiogenic factor, by real-time quantitative polymerase chain reaction (qPCR) and in situ whole-mount hybridization were also analyzed. PEG- b -PCL nano-micelle decreased growth of ISVs and CVs, as well as reduced flk1 expression in a concentration-dependent manner. Parallel to the inhibitory effects on angiogenesis, PEG- b -PCL nano-micelle exposure upregulated p53 pro-apoptotic pathway and induced cellular apoptosis in angiogenic regions by qPCR and terminal deoxynucleotidyl transferase dUTP nick end labeling (TUNEL) apoptosis assay. This study further showed that inhibiting p53 activity, either by pharmacological inhibitor or RNA interference, could abrogate the apoptosis and angiogenic defects caused by PEG- b -PCL nano-micelles, indicating that PEG- b -PCL nano-micelle inhibits angiogenesis by activating p53-mediated apoptosis. This study indicates that polymeric PEG- b -PCL nano-micelle could

Unusual cause of 'doughnut' sign in brain scanning

International Nuclear Information System (INIS)

Beauchamp, J.M.; Belanger, M.A.; Neitzschman, H.R.

1975-01-01

The ''doughnut'' sign in brain scanning was originally described in association with certain mass lesions having central necrotic, cystic, or avascular areas. A case in which this pattern occurred as a result of a superficial lesion, a large cephalhematoma, is presented. (U.S.)

Atmospheric plasma surface modifications of electrospun PCL/chitosan/PCL hybrid scaffolds by nozzle type plasma jets for usage of cell cultivation

Energy Technology Data Exchange (ETDEWEB)

Surucu, Seda [Department of Metallurgical and Materials Engineering, Atilim University, Incek, Golbasi, 06836, Ankara (Turkey); Masur, Kai [Leibniz Institute for Plasma Science and Technology (Germany); Turkoglu Sasmazel, Hilal, E-mail: hilal.sasmazel@atilim.edu.tr [Department of Metallurgical and Materials Engineering, Atilim University, Incek, Golbasi, 06836, Ankara (Turkey); Von Woedtke, Thomas; Weltmann, Klaus Dieter [Leibniz Institute for Plasma Science and Technology (Germany)

2016-11-01

Highlights: • Electrospun PCL/chitosan/PCL scaffolds introduced to the literature by us were modified with atmospheric pressure plasma jets. • Plasma was fed into the system with different gas flow rates, time and distances. • Topographical and functional changes were examined by various characterization methods. • Optimum plasma treatment parameters for enhanced topography and functionality were determined. • Electrospun hybrid plasma surface modified samples showed the increased biocompatibility performance of L929 fibroblast cells. - Abstract: This paper reports Ar gas, Ar + O{sub 2}, Ar + O{sub 2} + N{sub 2} gas mixtures and dry air plasma modifications by atmospheric pressure argon driven kINPen and air driven Diener (PlasmaBeam) plasma jets to alter surface properties of three dimensional (3D), electrospun PCL/Chitosan/PCL layer by layer hybrid scaffolds to improve human fibroblast (MRC5) cell attachment and growth. The characterizations of the samples were done by contact angle (CA) measurements, scanning electron microscopy (SEM), X-Ray Photoelectron spectroscopy (XPS) analysis. The results showed that the plasma modification carried out under dry air and Ar + O{sub 2} + N{sub 2} gas mixtures were altered effectively the nanotopography and the functionality of the material surfaces. It was found that the samples treated with Ar + O{sub 2} + N{sub 2} gas mixtures for 1 min and dry air for 9 min have better hydrophilicity 78.9° ± 1.0 and 75.6° ± 0.1, respectively compared to the untreated samples (126.5°). Biocompatibility performance of the scaffolds was determined with alamarBlue (aB) assay and MTT assay methods, Giemsa staining, fluorescence microscope, confocal laser scanning microscope (CLSM) and scanning electron microscope (SEM) analyses. The results showed that plasma treated samples increased the hydrophilicity and oxygen functionality and topography of the surfaces significantly, thus affecting the cell viability and proliferation on

Atmospheric plasma surface modifications of electrospun PCL/chitosan/PCL hybrid scaffolds by nozzle type plasma jets for usage of cell cultivation

International Nuclear Information System (INIS)

Surucu, Seda; Masur, Kai; Turkoglu Sasmazel, Hilal; Von Woedtke, Thomas; Weltmann, Klaus Dieter

2016-01-01

Highlights: • Electrospun PCL/chitosan/PCL scaffolds introduced to the literature by us were modified with atmospheric pressure plasma jets. • Plasma was fed into the system with different gas flow rates, time and distances. • Topographical and functional changes were examined by various characterization methods. • Optimum plasma treatment parameters for enhanced topography and functionality were determined. • Electrospun hybrid plasma surface modified samples showed the increased biocompatibility performance of L929 fibroblast cells. - Abstract: This paper reports Ar gas, Ar + O_2, Ar + O_2 + N_2 gas mixtures and dry air plasma modifications by atmospheric pressure argon driven kINPen and air driven Diener (PlasmaBeam) plasma jets to alter surface properties of three dimensional (3D), electrospun PCL/Chitosan/PCL layer by layer hybrid scaffolds to improve human fibroblast (MRC5) cell attachment and growth. The characterizations of the samples were done by contact angle (CA) measurements, scanning electron microscopy (SEM), X-Ray Photoelectron spectroscopy (XPS) analysis. The results showed that the plasma modification carried out under dry air and Ar + O_2 + N_2 gas mixtures were altered effectively the nanotopography and the functionality of the material surfaces. It was found that the samples treated with Ar + O_2 + N_2 gas mixtures for 1 min and dry air for 9 min have better hydrophilicity 78.9° ± 1.0 and 75.6° ± 0.1, respectively compared to the untreated samples (126.5°). Biocompatibility performance of the scaffolds was determined with alamarBlue (aB) assay and MTT assay methods, Giemsa staining, fluorescence microscope, confocal laser scanning microscope (CLSM) and scanning electron microscope (SEM) analyses. The results showed that plasma treated samples increased the hydrophilicity and oxygen functionality and topography of the surfaces significantly, thus affecting the cell viability and proliferation on/within scaffolds.

Enhanced adhesion and proliferation of human umbilical vein endothelial cells on conductive PANI-PCL fiber scaffold by electrical stimulation

International Nuclear Information System (INIS)

Li, Yumei; Li, Xiang; Zhao, Rui; Wang, Chuying; Qiu, Fangping; Sun, Bolun; Ji, He; Qiu, Ju; Wang, Ce

2017-01-01

Recently, electrically conductive biomaterial scaffolds have shown great potential in tissue regeneration. Herein, we reported an electrically conductive polyaniline (PANI) coated poly(ε-caprolactone) (PCL) electrospun micron-fiber scaffold for the enhanced attachment and proliferation of human umbilical vein endothelial cells (HUVECs) under electrical stimulation conditions. After the O 2 plasma treatment toward PCL electrospun fiber, PANI could be polymerized onto their surfaces successfully. The obtained PANI-PCL fibers were characterized by SEM observations, FT-IR spectra, XPS analysis, and water contact angle measurement. The mechanical tests indicated that the fibers could satisfy the practical vascular scaffold requirements. The conductivity of the PANI-PCL fibers was 6.71 × 10 −3 S/cm which could provide a conductive in-vitro platform to study the effect of electrical stimulation on HUVECs proliferation. When PANI-coated PCL fibers were compared with PCL fibers, HUVECs exhibited highly enhanced adhesion and viability, especially under electrical stimulation (ES) of 200, 300, and 400 mV/cm. Proliferation of HUVECs on PANI-PCL fibers was strongly dependent on electrical stimulation intensity. The results showed new insights into conductive scaffolds for vascular tissue engineering. - Highlights: • Electrospun PCL fibers were subjected to an O 2 plasma treatment to improve the hydrophilicity. • PANI was coated onto the surface of PCL fibers successfully after the plasma treatment. • HUVECs could attach, spread, and survive better on PANI-PCL fibers than on pure PCL fibers. • Electrical stimulation benefited proliferation of HUVECs on conductive PANI-PCL scaffold.

Enhanced adhesion and proliferation of human umbilical vein endothelial cells on conductive PANI-PCL fiber scaffold by electrical stimulation

Energy Technology Data Exchange (ETDEWEB)

Li, Yumei [Alan G. MacDiarmid Institute, Jilin University, Changchun 130012 (China); Department of Clinical Pharmacy and Traditional Chinese Medicine Pharmacology, School of Pharmaceutical Sciences, Changchun University of Chinese Medicine, Changchun 130117 (China); Li, Xiang; Zhao, Rui [Alan G. MacDiarmid Institute, Jilin University, Changchun 130012 (China); Wang, Chuying [Department of Clinical Pharmacy and Traditional Chinese Medicine Pharmacology, School of Pharmaceutical Sciences, Changchun University of Chinese Medicine, Changchun 130117 (China); Qiu, Fangping, E-mail: qfp2004@126.com [Chemistry and Biology Science College, Changchun University of Technology, Changchun 130012 (China); Sun, Bolun; Ji, He; Qiu, Ju [Alan G. MacDiarmid Institute, Jilin University, Changchun 130012 (China); Wang, Ce, E-mail: cwang@jlu.edu.cn [Alan G. MacDiarmid Institute, Jilin University, Changchun 130012 (China)

2017-03-01

Recently, electrically conductive biomaterial scaffolds have shown great potential in tissue regeneration. Herein, we reported an electrically conductive polyaniline (PANI) coated poly(ε-caprolactone) (PCL) electrospun micron-fiber scaffold for the enhanced attachment and proliferation of human umbilical vein endothelial cells (HUVECs) under electrical stimulation conditions. After the O{sub 2} plasma treatment toward PCL electrospun fiber, PANI could be polymerized onto their surfaces successfully. The obtained PANI-PCL fibers were characterized by SEM observations, FT-IR spectra, XPS analysis, and water contact angle measurement. The mechanical tests indicated that the fibers could satisfy the practical vascular scaffold requirements. The conductivity of the PANI-PCL fibers was 6.71 × 10{sup −3} S/cm which could provide a conductive in-vitro platform to study the effect of electrical stimulation on HUVECs proliferation. When PANI-coated PCL fibers were compared with PCL fibers, HUVECs exhibited highly enhanced adhesion and viability, especially under electrical stimulation (ES) of 200, 300, and 400 mV/cm. Proliferation of HUVECs on PANI-PCL fibers was strongly dependent on electrical stimulation intensity. The results showed new insights into conductive scaffolds for vascular tissue engineering. - Highlights: • Electrospun PCL fibers were subjected to an O{sub 2} plasma treatment to improve the hydrophilicity. • PANI was coated onto the surface of PCL fibers successfully after the plasma treatment. • HUVECs could attach, spread, and survive better on PANI-PCL fibers than on pure PCL fibers. • Electrical stimulation benefited proliferation of HUVECs on conductive PANI-PCL scaffold.

3D printed porous polycaprolactone/oyster shell powder (PCL/OSP) scaffolds for bone tissue engineering

Science.gov (United States)

Luo, Wenfeng; Zhang, Shuangying; Lan, Yuewei; Huang, Chen; Wang, Chao; Lai, Xuexu; Chen, Hanwei; Ao, Ningjian

2018-04-01

In this work, oyster shell powder (OSP) was used as the bio-filler and combined with polycaprolactone (PCL) through melt blending methodology. The PCL and PCL/OSP scaffolds were prepared using additive manufacturing process. All the 3D printed scaffolds hold a highly porosity and interconnected pore structures. OSP particles are dispersed in the polymer matrix, which helped to improve the degree of crystallinity and mineralization ability of the scaffolds. There was no significant cytotoxicity of the prepared scaffolds towards MG-63 cells, and all the scaffolds showed a well ALP activity. Therefore, PCL/OSP scaffolds had a high potential to be employed in the bone tissue engineering.

Study of thermal and mechanical properties of PCL films; Estudo das propriedades termicas de filmes a base de PCL

Energy Technology Data Exchange (ETDEWEB)

Siqueira, A.R. de; Vieira, A.B. da Silva; Leite, I.F., E-mail: itamaraf@gmail.com [Universidade Federal da Paraiba (UFPB), Joaoo Pessoa, PB (Brazil). Departamento de Engenharia de Materiais

2016-07-01

In the current situation of the market, it is remarkable the concern for the development of materials that offer better properties and biodegradable behavior. The scientific researches seeks development and improvement of materials for applications in products increasingly biodegradable. To do so, this research aims at obtaining films composed of polymer poly(ε-caprolactone)(PCL), aliphatic polyester synthetic and biodegradable, and silicates in layers, specifically in the State of Paraiba, prepared by the method of solution. This mixture makes it possible to form different nanostructures intercalated morphology and/or exfoliated, which therefore provides improvement in the thermal properties of the final product. After analyzing the results of X-ray diffraction (XRD) was observed predominantly exfoliated morphologies to PCL films containing different silicate content and an increase in thermal stability when there was a lower concentration of clay as thermal analysis (TGA). (author)

Electrospinning PCL Scaffolds Manufacture for Three-Dimensional Breast Cancer Cell Culture

Directory of Open Access Journals (Sweden)

Marc Rabionet

2017-08-01

Full Text Available In vitro cell culture is traditionally performed within two-dimensional (2D environments, providing a quick and cheap way to study cell properties in a laboratory. However, 2D systems differ from the in vivo environment and may not mimic the physiological cell behavior realistically. For instance, 2D culture models are thought to induce cancer stem cells (CSCs differentiation, a rare cancer cell subpopulation responsible for tumor initiation and relapse. This fact hinders the development of therapeutic strategies for tumors with a high relapse percentage, such as triple negative breast cancer (TNBC. Thus, three-dimensional (3D scaffolds have emerged as an attractive alternative to monolayer culture, simulating the extracellular matrix structure and maintaining the differentiation state of cells. In this work, scaffolds were fabricated through electrospinning different poly(ε-caprolactone-acetone solutions. Poly(ε-caprolactone (PCL meshes were seeded with triple negative breast cancer (TNBC cells and 15% PCL scaffolds displayed significantly (p < 0.05 higher cell proliferation and elongation than the other culture systems. Moreover, cells cultured on PCL scaffolds exhibited higher mammosphere forming capacity and aldehyde dehydrogenase activity than 2D-cultured cells, indicating a breast CSCs enrichment. These results prove the powerful capability of electrospinning technology in terms of poly(ε-caprolactone nanofibers fabrication. In addition, this study has demonstrated that electrospun 15% PCL scaffolds are suitable tools to culture breast cancer cells in a more physiological way and to expand the niche of breast CSCs. In conclusion, three-dimensional cell culture using PCL scaffolds could be useful to study cancer stem cell behavior and may also trigger the development of new specific targets against such malignant subpopulation.

Laryngopyocele: signs on computed tomography

Energy Technology Data Exchange (ETDEWEB)

Nazaroglu, Hasan E-mail: hnazarog@dicle.edu.tr; Oezates, Mustafa; Uyar, Asur; Deger, Emin; Simsek, Masum

2000-01-01

A laryngocele is an air-filled dilation of the saccule of the larynx. An infected laryngocele is called a laryngopyocele. Our experience with a case of laryngopyocele with signs on computed tomography before and after antibiotic therapy is presented since laryngopyocele is more unusual.

Laryngopyocele: signs on computed tomography

International Nuclear Information System (INIS)

Nazaroglu, Hasan; Oezates, Mustafa; Uyar, Asur; Deger, Emin; Simsek, Masum

2000-01-01

A laryngocele is an air-filled dilation of the saccule of the larynx. An infected laryngocele is called a laryngopyocele. Our experience with a case of laryngopyocele with signs on computed tomography before and after antibiotic therapy is presented since laryngopyocele is more unusual

Surface modification of Polycaprolactone (PCL) microcarrier for performance improvement of human skin fibroblast cell culture

Science.gov (United States)

Samsudin, N.; Hashim, Y. Z. H.; Arifin, M. A.; Mel, M.; Salleh, H. Mohd; Sopyan, I.; Hamid, M. Abdul

2018-01-01

Polycaprolactone (PCL) has many advantages for use in biomedical engineering field. In the present work PCL microcarriers of 150-200 μm were fabricated using oil-in-water (o/w) emulsification coupled with solvent evaporation method. The surface charge of PCL microcarrier was then been improved by using ultraviolet/ozone treatment to introduce oxygen functional group. Immobilisation of gelatin onto PCL microspheres using zero-length crosslinker provides a stable protein-support complex, with no diffusional barrier which is ideal for mass processing. The optimum concentration of carboxyl group (COOH) absorbed on the surface was 1495.9 nmol/g and the amount of gelatin immobilized was 1797.3 μg/g on UV/O3 treated microcarriers as compared to the untreated (320 μg/g) microcarriers. The absorption of functional oxygen groups on the surface and the immobilized gelatin was confirmed with Fourier Transformed Infrared spectroscopy and the enhancement of hydrophilicity of the surface was confirmed using water contact angle measurement which decreased (86.93° - 49.34°) after UV/O3 treatment and subsequently after immobilisation of gelatin. The attachment and growth kinetics for human skin fibroblast cell (HSFC) showed that adhesion occurred much more rapidly for gelatin immobilised surface as compared to untreated PCL and UV/O3 PCL microcarrier.

Effect of organo clay addition on thermal properties of poly lactide/ polycaprolactone (PLA/ PCL) nano composites

International Nuclear Information System (INIS)

Siti Zulaiha Hairaldin; Wan Md Zin Wan Yunus; Norazoma Ibrahim

2010-01-01

In this study, melt blending technique was applied to prepare poly lactide/polycaprolactone (PLA/ PCL) nano composites with various blends. Montmorillonite (MMT) was used as an addition to the matrix. In this study, melt blending technique was applied to prepare poly lactide/polycaprolactone (PLA/ PCL) nano composites. Montmorillonite (MMT) was used as an addition to the matrix with various percentages. The other one is modified clay prepared by modifying the nature of montmorillonite with octadecylamine (ODA) to improve the characteristic of PLA/ PCL blends. X-ray diffraction (XRD) results indicated intercalation of the PLA/ PCL into silicate nano size interlayers galleries of the nano composites. The presence of modified clays in nano composite was confirmed by FTIR spectrum. TGA and DTG results show addition of MMT and modified clay ODA-MMT improved the thermal stability of the PLA/ PCL blends. (author)

Biodegradable blends of urea plasticized thermoplastic starch (UTPS) and poly(ε-caprolactone) (PCL): Morphological, rheological, thermal and mechanical properties.

Science.gov (United States)

Correa, Ana Carolina; Carmona, Vitor Brait; Simão, José Alexandre; Capparelli Mattoso, Luiz Henrique; Marconcini, José Manoel

2017-07-01

Biodegradable blends of urea plasticized thermoplastic starch (UTPS) and poly(ε-caprolactone) (PCL) were prepared in a co-rotating twin screw extruder. The UTPS and PCL content varied in a range of 25wt%. The materials were characterized by capillary rheometry, scanning electron microscopy (SEM), termogravimetry (TGA), differential scanning calorimetry (DSC) and tensile tests. Capillary rheometry showed better interaction between UTPS and PCL at 110°C than at 130°C. SEM showed immiscibility of all blends and good dispersion of UTPS in PCL matrix up to 50wt%. However, a co-continuous morphology was found for UTPS/PCL 75/25. Thermal analysis showed that introducing PCL in UTPS, increased T onset due to higher thermal stability of PCL, and blends presented an intermediate behavior of neat polymers. The presence of PCL in blends improved significantly the mechanical properties of neat UTPS. Because they are totally biodegradable, these blends can be vehicles for controlled or slow release of nutrients to the soil while degraded. Copyright © 2017 Elsevier Ltd. All rights reserved.

Buildings and Terrain of Urban Area Point Cloud Segmentation based on PCL

International Nuclear Information System (INIS)

Liu, Ying; Zhong, Ruofei

2014-01-01

One current problem with laser radar point data classification is building and urban terrain segmentation, this paper proposes a point cloud segmentation method base on PCL libraries. PCL is a large cross-platform open source C++ programming library, which implements a large number of point cloud related efficient data structures and generic algorithms involving point cloud retrieval, filtering, segmentation, registration, feature extraction and curved surface reconstruction, visualization, etc. Due to laser radar point cloud characteristics with large amount of data, unsymmetrical distribution, this paper proposes using the data structure of kd-tree to organize data; then using Voxel Grid filter for point cloud resampling, namely to reduce the amount of point cloud data, and at the same time keep the point cloud shape characteristic; use PCL Segmentation Module, we use a Euclidean Cluster Extraction class with Europe clustering for buildings and ground three-dimensional point cloud segmentation. The experimental results show that this method avoids the multiple copy system existing data needs, saves the program storage space through the call of PCL library method and class, shortens the program compiled time and improves the running speed of the program

2-N, 6-O-sulfated chitosan-assisted BMP-2 immobilization of PCL scaffolds for enhanced osteoinduction

Energy Technology Data Exchange (ETDEWEB)

Cao, Lingyan [Key Laboratory for Ultrafine Materials of Ministry of Education, East China University of Science and Technology, Shanghai 200237 (China); Engineering Research Center for Biomedical Materials of Ministry of Education, East China University of Science and Technology, Shanghai 200237 (China); CSIRO Manufacturing, Bayview Avenue, Clayton, Victoria 3168 (Australia); Department of Prosthodontics, College of Stomatology, Ninth People' s Hospital, School of Medicine, Shanghai Jiao Tong University, 639 Zhizaoju Road, Shanghai 200011 (China); Yu, Yuanman [Key Laboratory for Ultrafine Materials of Ministry of Education, East China University of Science and Technology, Shanghai 200237 (China); Engineering Research Center for Biomedical Materials of Ministry of Education, East China University of Science and Technology, Shanghai 200237 (China); Wang, Jing, E-mail: biomatwj@163.com [Key Laboratory for Ultrafine Materials of Ministry of Education, East China University of Science and Technology, Shanghai 200237 (China); Engineering Research Center for Biomedical Materials of Ministry of Education, East China University of Science and Technology, Shanghai 200237 (China); Werkmeister, Jerome A [CSIRO Manufacturing, Bayview Avenue, Clayton, Victoria 3168 (Australia); McLean, Keith M, E-mail: Keith.McLean@csiro.au [CSIRO Manufacturing, Bayview Avenue, Clayton, Victoria 3168 (Australia); Liu, Changsheng, E-mail: liucs@ecust.edu.cn [Key Laboratory for Ultrafine Materials of Ministry of Education, East China University of Science and Technology, Shanghai 200237 (China); Engineering Research Center for Biomedical Materials of Ministry of Education, East China University of Science and Technology, Shanghai 200237 (China)

2017-05-01

The aim of this study was to develop a 2-N, 6-O-sulfated chitosan (26SCS) modified electrospun fibrous PCL scaffold for bone morphogenetic protein-2 (BMP-2) delivery to improve osteoinduction. The PCL scaffold was modified by an aminolysis reaction using ethylenediamine (ED) and 26SCS was immobilized via electrostatic interactions (PCL-N-S). Scaffolds were characterized by scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS) and contact angle measurements. In vitro BMP-2 adsorption and release kinetics indicated that modified PCL-N-S scaffolds showed higher levels of binding of BMP-2 (about 30–100 times), moderative burst release (about one third), and prolonged releasing time compared to the unmodified PCL scaffold. The bioactivity of released BMP-2 determined by alkaline phosphatase (ALP) activity assay was maintained and improved 8– 12 times with increasing concentration of immobilized 26SCS on the scaffolds. In vitro studies demonstrated that bone marrow mesenchymal stem cells (BMSCs) attached more readily to the PCL-N-S scaffolds with increased spreading. In conclusion, 26SCS modified PCL scaffolds can be a potent system for the sustained and bioactive delivery of BMP-2. - Graphical abstract: Limited self-regenerating capacity of human body makes the reconstruction of critical size bone defect a significant challenge. Although bone morphogenetic protein-2 (BMP-2) is an important differentiation factor inducing bone regeneration, it's short half-life in vivo and potent side effect at high dosage still show lots of concerns in the clinical use. Herein, modification of electrospun PCL scaffolds was presented through immobilizing of sulfated chitosan (26SCS). The modified scaffolds effectively improve the binding capacity of BMP-2 and exhibited an enhanced bioactivity and sustained release in vitro. Thus, the use of 26SCS modified PCL scaffolds combined with BMP-2 could be a useful scaffold for tissue

An additive manufacturing-based PCL-alginate-chondrocyte bioprinted scaffold for cartilage tissue engineering.

Science.gov (United States)

Kundu, Joydip; Shim, Jin-Hyung; Jang, Jinah; Kim, Sung-Won; Cho, Dong-Woo

2015-11-01

Regenerative medicine is targeted to improve, restore or replace damaged tissues or organs using a combination of cells, materials and growth factors. Both tissue engineering and developmental biology currently deal with the process of tissue self-assembly and extracellular matrix (ECM) deposition. In this investigation, additive manufacturing (AM) with a multihead deposition system (MHDS) was used to fabricate three-dimensional (3D) cell-printed scaffolds using layer-by-layer (LBL) deposition of polycaprolactone (PCL) and chondrocyte cell-encapsulated alginate hydrogel. Appropriate cell dispensing conditions and optimum alginate concentrations for maintaining cell viability were determined. In vitro cell-based biochemical assays were performed to determine glycosaminoglycans (GAGs), DNA and total collagen contents from different PCL-alginate gel constructs. PCL-alginate gels containing transforming growth factor-β (TGFβ) showed higher ECM formation. The 3D cell-printed scaffolds of PCL-alginate gel were implanted in the dorsal subcutaneous spaces of female nude mice. Histochemical [Alcian blue and haematoxylin and eosin (H&E) staining] and immunohistochemical (type II collagen) analyses of the retrieved implants after 4 weeks revealed enhanced cartilage tissue and type II collagen fibril formation in the PCL-alginate gel (+TGFβ) hybrid scaffold. In conclusion, we present an innovative cell-printed scaffold for cartilage regeneration fabricated by an advanced bioprinting technology. Copyright © 2013 John Wiley & Sons, Ltd.

Portuguese version of the PTSD Checklist-Military Version (PCL-M)-I: Confirmatory Factor Analysis and reliability.

Science.gov (United States)

Carvalho, Teresa; Cunha, Marina; Pinto-Gouveia, José; Duarte, Joana

2015-03-30

The PTSD Checklist-Military Version (PCL-M) is a brief self-report instrument widely used to assess Post-traumatic Stress Disorder (PTSD) symptomatology in war Veterans, according to DSM-IV. This study sought out to explore the factor structure and reliability of the Portuguese version of the PCL-M. A sample of 660 Portuguese Colonial War Veterans completed the PCL-M. Several Confirmatory Factor Analyses were conducted to test different structures for PCL-M PTSD symptoms. Although the respecified first-order four-factor model based on King et al.'s model showed the best fit to the data, the respecified first and second-order models based on the DSM-IV symptom clusters also presented an acceptable fit. In addition, the PCL-M showed adequate reliability. The Portuguese version of the PCL-M is thus a valid and reliable measure to assess the severity of PTSD symptoms as described in DSM-IV. Its use with Portuguese Colonial War Veterans may ease screening of possible PTSD cases, promote more suitable treatment planning, and enable monitoring of therapeutic outcomes. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

Tailoring degradation of AZ31 alloy by surface pre-treatment and electrospun PCL fibrous coating

Energy Technology Data Exchange (ETDEWEB)

Hanas, T. [Medical Materials Laboratory, Indian Institute of Technology Madras, Chennai 600036 (India); School of Nano Science and Technology, National Institute of Technology Calicut, Calicut, Kerala 673601 (India); Sampath Kumar, T.S., E-mail: tssk@iitm.ac.in [Medical Materials Laboratory, Indian Institute of Technology Madras, Chennai 600036 (India); Perumal, Govindaraj; Doble, Mukesh [Department of Biotechnology - Bhupat and Jyoti Mehta School of Biosciences, Indian Institute of Technology Madras, Chennai 600036 (India)

2016-08-01

AZ31 magnesium alloy was coated with polycaprolactone (PCL) nano-fibrous layer using electrospinning technique so as to control degradation in physiological environment. Before coating, the alloy was treated with HNO{sub 3} to have good adhesion between the coating and substrate. To elucidate the role of pre-treatment and coating, samples only with PCL coating as well as HNO{sub 3} treatment only were prepared for comparison. Best coating adhesion of 4B grade by ASTM D3359–09 tape test was observed for pre-treated samples. The effect of coating on in vitro degradation and biomineralization was studied using supersaturated simulated body fluid (SBF 5 ×). The weight loss and corrosion results obtained by immersion test showed that the combination of HNO{sub 3} pre-treatment and PCL coating is very effective in controlling the degradation rate and improving bioactivity. Cytotoxicity studies using L6 cells showed that PCL coated sample has better cell adhesion and proliferation compared to uncoated samples. Nano-fibrous PCL coating combined with prior acid treatment seems to be a promising method to tailor degradation rate with enhanced bioactivity of Mg alloys. - Highlights: • PCL electrospun coating on HNO{sub 3} pre-treated AZ31 alloy controls biodegradation. • Acid pre-treatment stabilizes the substrate - coating interface. • Electrospun porous coating improves biomineralization. • Coating similar to extracellular matrix enhances cell adhesion.

Functionalization of PCL-3D Electrospun Nanofibrous Scaffolds for Improved BMP2-Induced Bone Formation.

Science.gov (United States)

Miszuk, Jacob M; Xu, Tao; Yao, Qingqing; Fang, Fang; Childs, Josh D; Hong, Zhongkui; Tao, Jianning; Fong, Hao; Sun, Hongli

2018-03-01

Bone morphogenic protein 2 (BMP2) is a key growth factor for bone regeneration, possessing FDA approval for orthopedic applications. BMP2 is often required in supratherapeutic doses clinically, yielding adverse side effects and substantial treatment costs. Considering the crucial role of materials for BMPs delivery and cell osteogenic differentiation, we devote to engineering an innovative bone-matrix mimicking niche to improve low dose of BMP2-induced bone formation. Our previous work describes a novel technique, named thermally induced nanofiber self-agglomeration (TISA), for generating 3D electrospun nanofibrous (NF) polycaprolactone (PCL) scaffolds. TISA process could readily blend PCL with PLA, leading to increased osteogenic capabilities in vitro , however, these bio-inert synthetic polymers produced limited BMP2-induced bone formation in vivo. We therefore hypothesize that functionalization of NF 3D PCL scaffolds with bone-like hydroxyapatite (HA) and BMP2 signaling activator phenamil will provide a favorable osteogenic niche for bone formation at low doses of BMP2. Compared to PCL-3D scaffolds, PCL/HA-3D scaffolds demonstrated synergistically enhanced osteogenic differentiation capabilities of C2C12 cells with phenamil. Importantly, in vivo studies showed this synergism was able to generate significantly increased new bone in an ectopic mouse model, suggesting PCL/HA-3D scaffolds act as a favorable synthetic extracellular matrix for bone regeneration.

Case Report: Unusual computed tomographic features of ...

African Journals Online (AJOL)

A case report of a 57-year old woman who presented with signs and symptoms of intracranial mass. Computed tomographic (CT) and clinical features were unusual and suggestive of a parasaggital Meningioma. However an accurate diagnosis of a tuberculoma was made at surgery and histopathological examination.

Psychometric analysis of the PTSD Checklist-5 (PCL-5) among treatment-seeking military service members.

Science.gov (United States)

Wortmann, Jennifer H; Jordan, Alexander H; Weathers, Frank W; Resick, Patricia A; Dondanville, Katherine A; Hall-Clark, Brittany; Foa, Edna B; Young-McCaughan, Stacey; Yarvis, Jeffrey S; Hembree, Elizabeth A; Mintz, Jim; Peterson, Alan L; Litz, Brett T

2016-11-01

The Posttraumatic Stress Disorder Checklist (PCL-5; Weathers et al., 2013) was recently revised to reflect the changed diagnostic criteria for posttraumatic stress disorder (PTSD) in the fifth edition of the Diagnostic and Statistical Manual of Mental Disorders (DSM-5; American Psychiatric Association, 2013). We investigated the psychometric properties of PCL-5 scores in a large cohort (N = 912) of military service members seeking PTSD treatment while stationed in garrison. We examined the internal consistency, convergent and discriminant validity, and DSM-5 factor structure of PCL-5 scores, their sensitivity to clinical change relative to PTSD Symptom Scale-Interview (PSS-I; Foa, Riggs, Dancu, & Rothbaum, 1993) scores, and their diagnostic utility for predicting a PTSD diagnosis based on various measures and scoring rules. PCL-5 scores exhibited high internal consistency. There was strong agreement between the order of hypothesized and observed correlations among PCL-5 and criterion measure scores. The best-fitting structural model was a 7-factor hybrid model (Armour et al., 2015), which demonstrated closer fit than all other models evaluated, including the DSM-5 model. The PCL-5's sensitivity to clinical change, pre- to posttreatment, was comparable with that of the PSS-I. Optimally efficient cut scores for predicting PTSD diagnosis were consistent with prior research with service members (Hoge, Riviere, Wilk, Herrell, & Weathers, 2014). The results indicate that the PCL-5 is a psychometrically sound measure of DSM-5 PTSD symptoms that is useful for identifying provisional PTSD diagnostic status, quantifying PTSD symptom severity, and detecting clinical change over time in PTSD symptoms among service members seeking treatment. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Structure and magnetic properties of SiO{sub 2}/PCL novel sol–gel organic–inorganic hybrid materials

Energy Technology Data Exchange (ETDEWEB)

Catauro, Michelina, E-mail: michelina.catauro@unina2.it [Department of Industrial and Information Engineering, Second University of Naples, Via Roma 29, 81031 Aversa (Italy); Bollino, Flavia [Department of Industrial and Information Engineering, Second University of Naples, Via Roma 29, 81031 Aversa (Italy); Cristina Mozzati, Maria [Department of Physics, CNISM and INSTM, University of Pavia, Via Bassi 6, 27100 Pavia (Italy); Ferrara, Chiara; Mustarelli, Piercarlo [Department of Chemistry, Section of Physical Chemistry, University of Pavia and INSTM, Via Taramelli 16, 27100 Pavia (Italy)

2013-07-15

Organic–inorganic nanocomposite materials have been synthesized via sol–gel. They consist of an inorganic SiO{sub 2} matrix, in which different percentages of poly(ε-caprolactone) (PCL) have been incorporated. The formation of H-bonds among the carbonyl groups of the polymer chains and Si–OH group of the inorganic matrix has been proved by means of Fourier transform infrared spectroscopy (FT-IR) analysis and has been confirmed by solid-state nuclear magnetic resonance (NMR). X-Ray diffraction (XRD) analysis highlighted the amorphous nature of the synthesized materials. Scanning electron microscope (SEM) micrograph and atomic force microscope (AFM) topography showed their homogeneous morphology and nanostructure nature. Considering the opportunity to synthesize these hybrid materials under microgravity conditions by means of magnetic levitation, superconducting quantum interference device (SQUID) magnetometry has been used to quantify their magnetic susceptibility. This measure has shown that the SiO{sub 2}/PCL hybrid materials are diamagnetic and that their diamagnetic susceptibility is independent of temperature and increases with the PCL amount. - Graphical abstract: Characterization and magnetic properties of SiO{sub 2}/PCL organic–inorganic hybrid materials synthesized via sol–gel. FT-IR, Fourier transform infrared spectroscopy; solid-state NMR: solid-state nuclear magnetic resonance; SQUID: superconducting quantum interference device. - Highlights: • Sol–gel synthesis of SiO{sub 2}/PCL amorphous class I organic–inorganic hybrid materials. • FT-IR and NMR analyses show the hydrogen bonds formation between SiO{sub 2} and PCL. • AFM and SEM analyses confirm that the SiO{sub 2}/PCL are homogenous hybrid materials. • The SQUID measures show that the simples are diamagnetic. • Diamagnetic susceptibility of SiO{sub 2}/PCL materials increases with the PCL amount.

Vascular Tissue Engineering: Effects of Integrating Collagen into a PCL Based Nanofiber Material

Directory of Open Access Journals (Sweden)

Ulf Bertram

2017-01-01

Full Text Available The engineering of vascular grafts is a growing field in regenerative medicine. Although numerous attempts have been made, the current vascular grafts made of polyurethane (PU, Dacron®, or Teflon® still display unsatisfying results. Electrospinning of biopolymers and native proteins has been in the focus of research to imitate the extracellular matrix (ECM of vessels to produce a small caliber, off-the-shelf tissue engineered vascular graft (TEVG as a substitute for poorly performing PU, Dacron, or Teflon prostheses. Blended poly-ε-caprolactone (PCL/collagen grafts have shown promising results regarding biomechanical and cell supporting features. In order to find a suitable PCL/collagen blend, we fabricated plane electrospun PCL scaffolds using various collagen type I concentrations ranging from 5% to 75%. We analyzed biocompatibility and morphological aspects in vitro. Our results show beneficial features of collagen I integration regarding cell viability and functionality, but also adverse effects like the loss of a confluent monolayer at high concentrations of collagen. Furthermore, electrospun PCL scaffolds containing 25% collagen I seem to be ideal for engineering vascular grafts.

Effect of an organoclay on the reaction-induced phase-separation in a dynamically asymmetric epoxy/PCL system

Directory of Open Access Journals (Sweden)

J. Rotrekl

2013-12-01

Full Text Available The addition of layered silicates can significantly affect the phase behaviour of both immiscible thermoplastic blends and partially miscible thermoset systems that undergo reaction-induced phase separation (RIPS during curing. This study focuses on the phase behaviour of polycaprolactone (PCL/epoxy in the presence of organically modified montmorillonite (oMMT. Due to the high dynamic asymmetry caused by the differences in the molecular weights and viscosities of the PCL and the uncured epoxy, the critical point is localised at low PCL concentrations, as indicated by the pseudophase diagram. The addition of oMMT to the system led to the marked shift of the critical point towards higher concentrations of PCL, with an increase in the oMMT content occurring as a consequence of the preferential localisation of the clay in the epoxy phase, making this phase more dynamically slow. Significant changes in morphology, including phase inversion of the PCL/epoxy systems caused by the presence of oMMT, were recorded for PCL concentrations ranging from 10 to 30%.

Determining the mechanical properties of electrospun poly-ε-caprolactone (PCL) nanofibers using AFM and a novel fiber anchoring technique

Energy Technology Data Exchange (ETDEWEB)

Baker, Stephen R.; Banerjee, Soham; Bonin, Keith; Guthold, Martin, E-mail: gutholdm@wfu.edu

2016-02-01

Due to its low cost, biocompatibility and slow bioresorption, poly-ε-caprolactone (PCL) continues to be a suitable material for select biomedical engineering applications. We used a combined atomic force microscopy (AFM)/optical microscopy technique to determine key mechanical properties of individual electrospun PCL nanofibers with diameters between 440–1040 nm. Compared to protein nanofibers, PCL nanofibers showed much lower adhesion, as they slipped on the substrate when mechanically manipulated. We, therefore, first developed a novel technique to anchor individual PCL nanofibers to micrometer-sized ridges on a substrate, and then mechanically tested anchored nanofibers. When held at constant strain, tensile stress relaxed with fast and slow relaxation times of 1.0 ± 0.3 s and 8.8 ± 3.1 s, respectively. The total tensile modulus was 62 ± 26 MPa, the elastic (non-relaxing) component of the tensile modulus was 53 ± 36 MPa. Individual PCL fibers could be stretched elastically (without permanent deformation) to strains of 19–23%. PCL nanofibers are rather extensible; they could be stretched to a strain of at least 98%, and a tensile strength of at least 12 MPa, before they slipped off the AFM tip. PCL nanofibers that had aged for over a month at ambient conditions became stiffer and less elastic. Our technique provides accurate nanofiber mechanical data, which are needed to guide construction of scaffolds for cells and other biomedical devices. - Highlights: • Developed technique to anchor single nanofibers on microridges • Determined mechanical properties of e-spun PCL fibers • E-spun PCL fibers have similar mechanical properties as wet fibrin fibers. • E-spun PCL fiber total elastic modulus is ~ 60 MPa. • E-spun PCL fiber extensibility is > 100%.

Fast micrographia: An unusual but distinctive sign

Directory of Open Access Journals (Sweden)

Umaiorubahan Meenakshisundaram

2013-01-01

Full Text Available Fast micrographia is a rare clinical sign, which is reported in patients with pallidal pathology. A 68-year-old male presented with hypophonia and short shuffling gait with decreased arm swing. About 3 weeks before, he had an acute myocardial infarction and a period of hemodynamic and respiratory distress during which he required mechanical ventilatory support. He was found to have a fast handwriting with micrographia from the outset. His rapid alternating hand and finger movements were normal. Magnetic resonance imaging (MRI of the brain showed features of hypoxic ischemic encephalopathy including hyperintensities on T1 and T2 weighted images in the globus pallidus, and putamen bilaterally.

Study of Enzymatic Degradation Comparison of CPP/Bionolle and CPP/PCL Blend with Modic

International Nuclear Information System (INIS)

Nikham; Makuuchi, K.; Yoshii, Fumeo

2000-01-01

Melt-blending poly propylene-co-ethylene (CPP)/poly butylene succinate (Bionolle), CPP/polyεcaprolactone (PCL) with polypropylene grafted maleic anhydride (Modic) as compatibilizer has been studied. The effect of Modic concentration on the compatibility was evaluated using the ultimate elongation at break, tensile strength and SEM micrographs. The Result show that 20 wt % and 10 % wt of Medic appears to be an optimum concentration for CPP/Bionolle and CPP/PCL blend respectively, as indicated by relatively high elongation at breaks, tensile strength and formation of co-continuous phase in the blend morphology. Enzymatic degradation of the CPP/Bionolle and CPP/PCL blend with 10 wt % of Modic was carried out using lipase AK enzyme in the phospate buffer solution pH 7.0 and incubated at the fixed temperature for 8 days. The result show that about 15 % and 86 % weight loss film of composition CPP/Bionolle>25/75 and CPP/PCL >25/75 blend respectively has been reached

Facile fabrication of aloe vera containing PCL nanofibers for barrier membrane application.

Science.gov (United States)

Carter, Princeton; Rahman, Shekh M; Bhattarai, Narayan

2016-01-01

Guided tissue regeneration (GTR) is a widely used method in dental surgical procedures that utilizes a barrier membrane to exclude migration of epithelium and ensure repopulation of periodontal ligament cells at the sites having insufficient gingiva. Commercial GTR membranes are typically composed of synthetic polymers that have had mild clinical success mostly because of their lack of proper bioactivity and appropriate degradation profile. In this study, a natural polymer, aloe vera was blended with polycaprolactone (PCL) to create nanofibrous GTR membranes by electrospinning. Aloe vera has proven anti-inflammatory properties and enhances the regeneration of periodontium tissues. PCL, a synthetic polymer, is well known to produce miscible polyblends nanofibers with natural polymers. Nanofibrous membranes with varying composition of PCL to aloe vera were fabricated, and several physicochemical and biological properties, such as fiber morphology, wettability, chemical structure, mechanical strength, and cellular compatibility of the membranes were analyzed. PCL/aloe vera membranes with ratios from 100/00 to 70/30 showed good uniformity in fiber morphology and suitable mechanical properties, and retained the integrity of their fibrous structure in aqueous solutions. Experimental results, using cell viability assay and cell attachment observation, showed that the nanofibrous membranes support 3T3 cell viability and could be a potential candidate for GTR therapy.

Biocorrosion and osteoconductivity of PCL/nHAp composite porous film-based coating of magnesium alloy

Science.gov (United States)

Abdal-hay, Abdalla; Amna, Touseef; Lim, Jae Kyoo

2013-04-01

The present study was aimed at designing a novel porous hydroxyapatite/poly(ɛ-caprolactone) (nHAp/PCL) hybrid nanocomposite matrix on a magnesium substrate with high and low porosity. The coated samples were prepared using a dip-coating technique in order to enhance the bioactivity and biocompatibility of the implant and to control the degradation rate of magnesium alloys. The mechanical and biocompatible properties of the coated and uncoated samples were investigated and an in vitro test for corrosion was conducted by electrochemical polarization and measurement of weight loss. The corrosion test results demonstrated that both the pristine PCL and nHAp/PCL composites showed good corrosion resistance in SBF. However, during the extended incubation time, the composite coatings exhibited more uniform and superior resistance to corrosion attack than pristine PCL, and were able to survive severe localized corrosion in physiological solution. Furthermore, the bioactivity of the composite film was determined by the rapid formation of uniform CaP nanoparticles on the sample surfaces during immersion in SBF. The mechanical integrity of the composite coatings displayed better performance (˜34% higher) than the uncoated samples. Finally, our results suggest that the nHAp incorporated with novel PCL composite membranes on magnesium substrates may serve as an excellent 3-D platform for cell attachment, proliferation, migration, and growth in bone tissue. This novel as-synthesized nHAp/PCL membrane on magnesium implants could be used as a potential material for orthopedic applications in the future.

PCL-HA microscaffolds for in vitro modular bone tissue engineering.

Science.gov (United States)

Totaro, Alessandra; Salerno, Aurelio; Imparato, Giorgia; Domingo, Concepción; Urciuolo, Francesco; Netti, Paolo Antonio

2017-06-01

The evolution of microscaffolds and bone-bioactive surfaces is a pivotal point in modular bone tissue engineering. In this study, the design and fabrication of porous polycaprolactone (PCL) microscaffolds functionalized with hydroxyapatite (HA) nanoparticles by means of a bio-safe and versatile thermally-induced phase separation process is reported. The ability of the as-prepared nanocomposite microscaffolds to support the adhesion, growth and osteogenic differentiation of human mesenchymal stem cells (hMSCs) in standard and osteogenic media and using dynamic seeding/culture conditions was investigated. The obtained results demonstrated that the PCL-HA nanocomposite microparticles had an enhanced interaction with hMSCs and induced their osteogenic differentiation, even without the exogenous addition of osteogenic factors. In particular, calcium deposition, alizarin red assay, histological analysis, osteogenic gene expression and collagen I secretion were assessed. The results of these tests demonstrated the formation of bone microtissue precursors after 28 days of dynamic culture. These findings suggest that PCL-HA nanocomposite microparticles represent an excellent platform for in vitro modular bone tissue engineering. Copyright © 2015 John Wiley & Sons, Ltd. Copyright © 2015 John Wiley & Sons, Ltd.

Mechanical properties of electrospun PCL scaffold under in vitro and accelerated degradation conditions

DEFF Research Database (Denmark)

Løvdal, Alexandra Liv Vest; Vange, Jakob; Nielsen, Lene Feldskov

2014-01-01

Within recent years, researchers have looked into using polycaprolactone (PCL) as a synthetic biodegradable scaffold for tissue engineering purposes. This study investigated the mechanical properties of an electrospun PCL, while being exposed to physiological fluids at 37C (in vitro conditions) w...... in buffer (pH 12). The accelerated study showed a linear decrease in both elastic modulus and yield stress as a function of degradation time....

The Fabrication and Characterization of PCL/Rice Husk Derived Bioactive Glass-Ceramic Composite Scaffolds

Directory of Open Access Journals (Sweden)

Farnaz Naghizadeh

2014-01-01

Full Text Available The present study was conducted to fabricate a 3D scaffold using polycaprolactone (PCL and silicate based bioactive glass-ceramic (R-SBgC. Different concentrations of R-SBgC prepared from rice husk ash (RHA were combined with PCL to fabricate a composite scaffold using thermally induced phase separation (TIPS method. The products were then characterized using SEM and EDX. The results demonstrated that R-SBgC in PCL matrix produced a bioactive material which has highly porous structure with interconnected porosities. There appears to be a relationship between the increase in R-SBgC concentration and increased material density and compressive modulus; however, increasing R-SBgC concentration result in reduced scaffold porosity. In conclusion, it is possible to fabricate a PCL/bioactive glass-ceramic composite from processed rice husk. Varying the R-SBgC concentrations can control the properties of this material, which is useful in the development of the ideal scaffold intended for use as a bone substitute in nonload bearing sites.

Electrospun PVA-PCL-HAB scaffold for craniofacial bone regeneration

DEFF Research Database (Denmark)

Prabha, Rahul; Kraft, David Christian Evar; Melsen, Birte

2015-01-01

-caprolactone (PCL)- triphasic bioceramic(HAB) scaffold to biomimic native tissue and we tested its ability to support osteogenic differentiation of stromal stem cells ( MSC) and its suitability for regeneration of craniofa- cial defects. Physiochemical characterizations of the scaffold, including con- tact angle...... body fluid immersed scaffold samples. Culturing human adult dental pulp stem cells (DPSC) and human bone marrow derived MSC seeded on PVA-PCL-HAB scaffold showed enhanced cell proliferation and in vitro osteoblastic differentiation. Cell-containing scaffolds were implanted subcutaneously in immune...... deficient mice. Histologic ex- amination of retrieved implant sections stained with H&E, Col- lagenType I and Human Vimentin antibody demonstrated that the cells survived in vivo in the implants for at least 8 weeks with evidence of osteoblastic differentiation and angiogenesis within the implants. Our...

Enhanced corrosion resistance and biocompatibility of AZ31 Mg alloy using PCL/ZnO NPs via electrospinning

Energy Technology Data Exchange (ETDEWEB)

Kim, Jinwoo [Department of Bionanosystem Engineering, Graduate School, Chonbuk National University, Jeonju 561-756 (Korea, Republic of); Mousa, Hamouda M. [Department of Bionanosystem Engineering, Graduate School, Chonbuk National University, Jeonju 561-756 (Korea, Republic of); Department of Engineering Materials and Mechanical Design, Faculty of Engineering, South Valley University, Qena 83523 (Egypt); Park, Chan Hee, E-mail: biochan@jbnu.ac.kr [Department of Bionanosystem Engineering, Graduate School, Chonbuk National University, Jeonju 561-756 (Korea, Republic of); Division of Mechanical Design Engineering, Chonbuk National University, Jeonju, Jeonbuk 561-756 (Korea, Republic of); Kim, Cheol Sang, E-mail: chskim@jbnu.ac.kr [Department of Bionanosystem Engineering, Graduate School, Chonbuk National University, Jeonju 561-756 (Korea, Republic of); Division of Mechanical Design Engineering, Chonbuk National University, Jeonju, Jeonbuk 561-756 (Korea, Republic of)

2017-02-28

Highlights: • PCL/ZnO composite coating layer by electrospinning techniques showed the nano-scaled and porous surface structure. • Addition of zinc oxide NPs in the PCL fibers led to enhanced coating adhesion and corrosion resistance. • The composite coated surfaces on Mg substrates improved cell attachment and proliferation. - Abstract: In the efforts to improve corrosion resistance and biocompatibility of magnesium alloys, polycarprolactone (PCL) and zinc oxide nanoparticles (ZnO NPs) composite coatings were applied onto AZ31 Mg alloys via electrospinning technique in this study. The PCL/ZnO composite coatings on Mg alloys were characterized by using FE-SEM, EDX, XPS, and FT-IR. Moreover, coating adhesion test, electrochemical corrosion test, and biocompatibility test in vitro were performed to measure coating performance. Our results revealed that the increase in the content of ZnO NPs in the composite coatings not only improved the coating adhesion of composite coatings on Mg alloys, but also increased the corrosion resistance. Furthermore, the biocompatibility of MC3T3-E1 osteoblasts of the PCL/ZnO composite coated samples was superior to the biocompatibility of the bare samples. Such data suggest that applying PCL/ZnO composite coating to the magnesium alloys has suitable potential in biomedical applications.

Enhanced corrosion resistance and biocompatibility of AZ31 Mg alloy using PCL/ZnO NPs via electrospinning

International Nuclear Information System (INIS)

Kim, Jinwoo; Mousa, Hamouda M.; Park, Chan Hee; Kim, Cheol Sang

2017-01-01

Highlights: • PCL/ZnO composite coating layer by electrospinning techniques showed the nano-scaled and porous surface structure. • Addition of zinc oxide NPs in the PCL fibers led to enhanced coating adhesion and corrosion resistance. • The composite coated surfaces on Mg substrates improved cell attachment and proliferation. - Abstract: In the efforts to improve corrosion resistance and biocompatibility of magnesium alloys, polycarprolactone (PCL) and zinc oxide nanoparticles (ZnO NPs) composite coatings were applied onto AZ31 Mg alloys via electrospinning technique in this study. The PCL/ZnO composite coatings on Mg alloys were characterized by using FE-SEM, EDX, XPS, and FT-IR. Moreover, coating adhesion test, electrochemical corrosion test, and biocompatibility test in vitro were performed to measure coating performance. Our results revealed that the increase in the content of ZnO NPs in the composite coatings not only improved the coating adhesion of composite coatings on Mg alloys, but also increased the corrosion resistance. Furthermore, the biocompatibility of MC3T3-E1 osteoblasts of the PCL/ZnO composite coated samples was superior to the biocompatibility of the bare samples. Such data suggest that applying PCL/ZnO composite coating to the magnesium alloys has suitable potential in biomedical applications.

How the Complex Interplay between Different Blocks Determines the Isothermal Crystallization Kinetics of Triple-Crystalline PEO-b-PCL-b-PLLA Triblock Terpolymers

KAUST Repository

Palacios, Jordana K.

2017-12-05

PEO-b-PCL-b-PLLA triblock terpolymers are fascinating triple-crystalline materials. In this work, the isothermal crystallization kinetics of these terpolymers evaluated by differential scanning calorimetry (DSC) is presented for the first time and compared to analogous PCL-b-PLLA diblock copolymers and to PLLA, PCL, and PEO homopolymers. The results are complemented by in situ SAXS/WAXS synchrotron experiments. One-, two-, and three-step crystallization protocols were employed to study the crystallization kinetics of the blocks. At PLLA block crystallization temperatures, both PCL and PEO molten chains caused a strong plasticizing effect on the PLLA block crystallization, and the overall crystallization rate of the PLLA block in the terpolymers was higher than that in the PLLA-b-PCL diblock copolymers. In the case of the PCL block, the crystallization was followed after PLLA was fully crystallized (two-step crystallization). A nucleating effect induced by the previously formed PLLA crystals was observed. However, an antiplasticizing effect on PCL crystallization was detected if the sample is quenched directly from the melt to the PCL crystallization temperature (one-step crystallization). Finally, the crystallization of the PEO block was followed after PLLA and PCL had fully crystallized (three-step crystallization). The PEO crystallization rate highly decreased due to the confinement imposed by the previously formed PLLA and PCL crystals. Complex competitive effects such as plasticization, nucleation, antiplasticization, and confinement occurred during the isothermal crystallization of tricrystalline PEO-b-PCL-b-PLLA triblock terpolymers.

How the Complex Interplay between Different Blocks Determines the Isothermal Crystallization Kinetics of Triple-Crystalline PEO-b-PCL-b-PLLA Triblock Terpolymers

KAUST Repository

Palacios, Jordana K.; Zhao, Junpeng; Hadjichristidis, Nikolaos; Mü ller, Alejandro J.

2017-01-01

PEO-b-PCL-b-PLLA triblock terpolymers are fascinating triple-crystalline materials. In this work, the isothermal crystallization kinetics of these terpolymers evaluated by differential scanning calorimetry (DSC) is presented for the first time and compared to analogous PCL-b-PLLA diblock copolymers and to PLLA, PCL, and PEO homopolymers. The results are complemented by in situ SAXS/WAXS synchrotron experiments. One-, two-, and three-step crystallization protocols were employed to study the crystallization kinetics of the blocks. At PLLA block crystallization temperatures, both PCL and PEO molten chains caused a strong plasticizing effect on the PLLA block crystallization, and the overall crystallization rate of the PLLA block in the terpolymers was higher than that in the PLLA-b-PCL diblock copolymers. In the case of the PCL block, the crystallization was followed after PLLA was fully crystallized (two-step crystallization). A nucleating effect induced by the previously formed PLLA crystals was observed. However, an antiplasticizing effect on PCL crystallization was detected if the sample is quenched directly from the melt to the PCL crystallization temperature (one-step crystallization). Finally, the crystallization of the PEO block was followed after PLLA and PCL had fully crystallized (three-step crystallization). The PEO crystallization rate highly decreased due to the confinement imposed by the previously formed PLLA and PCL crystals. Complex competitive effects such as plasticization, nucleation, antiplasticization, and confinement occurred during the isothermal crystallization of tricrystalline PEO-b-PCL-b-PLLA triblock terpolymers.

Development and properties of duplex MgF2/PCL coatings on biodegradable magnesium alloy for biomedical applications.

Science.gov (United States)

Makkar, Preeti; Kang, Hoe Jin; Padalhin, Andrew R; Park, Ihho; Moon, Byoung-Gi; Lee, Byong Taek

2018-01-01

The present work addresses the performance of polycaprolactone (PCL) coating on fluoride treated (MgF2) biodegradable ZK60 magnesium alloy (Mg) for biomedical application. MgF2 conversion layer was first produced by immersing Mg alloy substrate in hydrofluoric acid solution. The outer PCL coating was then prepared using dip coating technique. Morphology, elements profile, phase structure, roughness, mechanical properties, invitro corrosion, and biocompatibility of duplex MgF2/PCL coating were then characterized and compared to those of fluoride coated and uncoated Mg samples. The invivo degradation behavior and biocompatibility of duplex MgF2/PCL coating with respect to ZK60 Mg alloy were also studied using rabbit model for 2 weeks. SEM and TEM analysis showed that the duplex coating was uniform and comprised of porous PCL film (~3.3 μm) as upper layer with compact MgF2 (~2.2 μm) as inner layer. No significant change in microhardness was found on duplex coating compared with uncoated ZK60 Mg alloy. The duplex coating showed improved invitro corrosion resistance than single layered MgF2 or uncoated alloy samples. The duplex coating also resulted in better cell viability, cell adhesion, and cell proliferation compared to fluoride coated or uncoated alloy. Preliminary invivo studies indicated that duplex MgF2/PCL coating reduced the degradation rate of ZK60 Mg alloy and exhibited good biocompatibility. These results suggested that duplex MgF2/PCL coating on magnesium alloy might have great potential for orthopedic applications.

Effects of Chitosan Alkali Pretreatment on the Preparation of Electrospun PCL/Chitosan Blend Nanofibrous Scaffolds for Tissue Engineering Application

Directory of Open Access Journals (Sweden)

Fatemeh Roozbahani

2013-01-01

Full Text Available Recently, nanofibrous scaffolds have been used in the field of biomedical engineering as wound dressings, tissue engineering scaffolds, and drug delivery applications. The electrospun nanofibrous scaffolds can be used as carriers for several types of drugs, genes, and growth factors. PCL is one of the most commonly applied synthetic polymers for medical use because of its biocompatibility and slow biodegradability. PCL is hydrophobic and has no cell recognition sites on its structure. Electrospinning of chitosan and PCL blend was investigated in formic acid/acetic acid as the solvent with different PCL/chitosan ratios. High viscosity of chitosan solutions makes difficulties in the electrospinning process. Strong hydrogen bonds in a 3D network in acidic condition prevent the movement of polymeric chains exposed to the electrical field. Consequently, the amount of chitosan in PCL/chitosan blend was limited and more challenging when the concentration of PCL increases. The treatment of chitosan in alkali condition under high temperature reduced its molecular weight. Longer treatment time further decreased the molecular weight of chitosan and hence its viscosity. Electrospinning of PCL/chitosan blend was possible at higher chitosan ratio, and SEM images showed a decrease in fiber diameter and narrower distribution with increase in the chitosan ratio.

Influence of PCL on the material properties of collagen based biocomposites and in vitro evaluation of drug release

International Nuclear Information System (INIS)

Kanungo, Ivy; Fathima, Nishter Nishad; Rao, Jonnalagadda Raghava; Nair, Balachandran Unni

2013-01-01

Formulation of biodegradable collagen–poly-ε-caprolactone (PCL) based biomaterials for the sustained release of insulin is the main objective of the present work. PCL has been employed to modulate the physico-chemical behavior of collagen to control the drug release. Designed formulations were employed to statistically optimize insulin release parameter profile at different collagen to PCL molar ratios. Circular dichroism, thermoporometry, FTIR, impedance and scanning electron microscopy techniques have been employed to investigate the effect of PCL on hydration dynamics of the collagen molecule, which in turn changes the dissolution parameters of the drug from the systems. Drug entrapment efficiency has been found to be maximum for collagen to PCL molar ratio of 1:2 (> 90%). In vitro dissolution test reveals that 99% of the drug was released from composite at collagen to PCL molar ratio of 1:3 and 1:4 within 2 h, which indicates that hydrophobicity of the matrix results in weak interaction between lipophilic drug and carrier materials. The least burst release was observed for collagen to PCL molar ratio at 1:2 as synergistic interactions between collagen and PCL was maximum at that particular polymer–polymer ratios. The drug release data indicates super case-II transport of drug (n > 1.0). - Graphical abstract: Collagen–poly-ε-caprolactone based biomaterials for the sustained release of insulin were formulated. Circular dichroism, thermoporometry, FTIR, impedance and scanning electron microscopy techniques have been employed to elucidate the effect of PCL on the structure of the collagen and in vitro drug release. The drug release data fitted to the kinetic model indicates super case-II transport due to the combination of diffusion and polymer relaxation/dissolution (n > 1.0). - Highlights: • Poly-ε-caprolactone influences physico-chemical behavior of collagen. • Poly-ε-caprolactone influences in vitro drug release mechanism from biocomposites. �

Fluorescent, thermo-responsive biotin-P(NIPAAm-co-NDAPM)- b-PCL micelles for cell-tracking and drug delivery

International Nuclear Information System (INIS)

Li Yongyong; Zhang Xianzheng; Cheng Han; Zhu Jingling; Li Unnam; Cheng Sixue; Zhuo Renxi

2007-01-01

An amphiphilic, biotinylated poly(N-isopropylacrylamide-co-N-(3-dimethylamino propyl)methacrylamide)-block- poly(ε-caprolactone) (biotin-P(NIPAAm-co-NDAPM)- b-PCL) block copolymer was synthesized. The cytotoxicity study showed that the copolymer exhibited no apparent cytotoxicity. In aqueous solution, biotin-P(NIPAAm-co-NDAPM)- b-PCL copolymer was able to self-assemble into micelles of around 60 nm in diameter with a critical micellar concentration (CMC) of 36 mg l -1 . Biotin-P(NIPAAm- co-NDAPM)-b-PCL micelles were thermo-responsive and the cloud point temperature was at 36.5 deg. C. The fluorescent group, fluorescein isothiocyanate (FITC) was further introduced to label the biotin-P(NIPAAm-co-NDAPM)- b-PCL copolymer. A cell internalization experiment was conducted and it was found that the fluorescent micelles could be internalized into the cells. The drug release behavior of drug-loading micelles was also examined and the drug-loaded biotin-P(NIPAAm-co-NDAPM)- b-PCL micelles showed slow drug release at 27 deg. C and fast drug release at 37 deg. C

PLDLA/PCL-T Scaffold for Meniscus Tissue Engineering.

Science.gov (United States)

Esposito, Andrea Rodrigues; Moda, Marlon; Cattani, Silvia Mara de Melo; de Santana, Gracy Mara; Barbieri, Juliana Abreu; Munhoz, Monique Moron; Cardoso, Túlio Pereira; Barbo, Maria Lourdes Peris; Russo, Teresa; D'Amora, Ugo; Gloria, Antonio; Ambrosio, Luigi; Duek, Eliana Aparecida de Rezende

2013-04-01

The inability of the avascular region of the meniscus to regenerate has led to the use of tissue engineering to treat meniscal injuries. The aim of this study was to evaluate the ability of fibrochondrocytes preseeded on PLDLA/PCL-T [poly(L-co-D,L-lactic acid)/poly(caprolactone-triol)] scaffolds to stimulate regeneration of the whole meniscus. Porous PLDLA/PCL-T (90/10) scaffolds were obtained by solvent casting and particulate leaching. Compressive modulus of 9.5±1.0 MPa and maximum stress of 4.7±0.9 MPa were evaluated. Fibrochondrocytes from rabbit menisci were isolated, seeded directly on the scaffolds, and cultured for 21 days. New Zealand rabbits underwent total meniscectomy, after which implants consisting of cell-free scaffolds or cell-seeded scaffolds were introduced into the medial knee meniscus; the negative control group consisted of rabbits that received no implant. Macroscopic and histological evaluations of the neomeniscus were performed 12 and 24 weeks after implantation. The polymer scaffold implants adapted well to surrounding tissues, without apparent rejection, infection, or chronic inflammatory response. Fibrocartilaginous tissue with mature collagen fibers was observed predominantly in implants with seeded scaffolds compared to cell-free implants after 24 weeks. Similar results were not observed in the control group. Articular cartilage was preserved in the polymeric implants and showed higher chondrocyte cell number than the control group. These findings show that the PLDLA/PCL-T 90/10 scaffold has potential for orthopedic applications since this material allowed the formation of fibrocartilaginous tissue, a structure of crucial importance for repairing injuries to joints, including replacement of the meniscus and the protection of articular cartilage from degeneration.

Study of thermal and mechanical properties of PCL films

International Nuclear Information System (INIS)

Siqueira, A.R. de; Vieira, A.B. da Silva; Leite, I.F.

2016-01-01

In the current situation of the market, it is remarkable the concern for the development of materials that offer better properties and biodegradable behavior. The scientific researches seeks development and improvement of materials for applications in products increasingly biodegradable. To do so, this research aims at obtaining films composed of polymer poly(ε-caprolactone)(PCL), aliphatic polyester synthetic and biodegradable, and silicates in layers, specifically in the State of Paraiba, prepared by the method of solution. This mixture makes it possible to form different nanostructures intercalated morphology and/or exfoliated, which therefore provides improvement in the thermal properties of the final product. After analyzing the results of X-ray diffraction (XRD) was observed predominantly exfoliated morphologies to PCL films containing different silicate content and an increase in thermal stability when there was a lower concentration of clay as thermal analysis (TGA). (author)

Vectorial Resilient PC(l) of Order k Boolean Functions from AG-Codes

Institute of Scientific and Technical Information of China (English)

Hao CHEN; Liang MA; Jianhua LI

2011-01-01

Propagation criteria and resiliency of vectorial Boolean functions are important for cryptographic purpose (see [1- 4, 7, 8, 10, 11, 16]). Kurosawa, Stoh [8] and Carlet [1]gave a construction of Boolean functions satisfying PC(l) of order k from binary linear or nonlinear codes. In this paper, the algebraic-geometric codes over GF(2m) are used to modify the Carlet and Kurosawa-Satoh's construction for giving vectorial resilient Boolean functions satisfying PC(l) of order k criterion. This new construction is compared with previously known results.

Calcium phosphate coated Keratin-PCL scaffolds for potential bone tissue regeneration.

Science.gov (United States)

Zhao, Xinxin; Lui, Yuan Siang; Choo, Caleb Kai Chuen; Sow, Wan Ting; Huang, Charlotte Liwen; Ng, Kee Woei; Tan, Lay Poh; Loo, Joachim Say Chye

2015-04-01

The incorporation of hydroxyapatite (HA) nanoparticles within or on the surface of electrospun polymeric scaffolds is a popular approach for bone tissue engineering. However, the fabrication of osteoconductive composite scaffolds via benign processing conditions still remains a major challenge to date. In this work, a new method was developed to achieve a uniform coating of calcium phosphate (CaP) onto electrospun keratin-polycaprolactone composites (Keratin-PCL). Keratin within PCL was crosslinked to decrease its solubility, before coating of CaP. A homogeneous coating was achieved within a short time frame (~10min) by immersing the scaffolds into Ca(2+) and (PO4)(3-) solutions separately. Results showed that the incorporation of keratin into PCL scaffolds not only provided nucleation sites for Ca(2+) adsorption and subsequent homogeneous CaP surface deposition, but also facilitated cell-matrix interactions. An improvement in the mechanical strength of the resultant composite scaffold, as compared to other conventional coating methods, was also observed. This approach of developing a biocompatible bone tissue engineering scaffold would be adopted for further in vitro osteogenic differentiation studies in the future. Copyright © 2015 Elsevier B.V. All rights reserved.

MRI imaging of displaced meniscal tears: Report of a case highlighting new potential pitfalls of the MRI signs

International Nuclear Information System (INIS)

Prasad, Abhishek; Brar, Rahat; Rana, Shaleen

2014-01-01

Magnetic resonance imaging (MRI) has been found to be an excellent imaging tool for meniscal injuries. Various MRI signs have been described to detect displaced meniscal injuries, specifically the bucket-handle tears. Although these signs are quite helpful in diagnosing meniscal tears, various pitfalls have also been reported for these signs. Double anterior cruciate ligament (ACL) sign refers to presence of a linear hypointense soft tissue anterior to the ACL, which represented the flipped bucket-handle tear of the meniscus. Disproportional posterior horn and flipped meniscus signs represent asymmetrically thickened horns of the menisci due to overlying displaced meniscal fragments. We report a case wherein MRI of the knee showed tear and displacement of the medial patellofemoral ligament (MPFL) and vastus medialis complex, medial collateral ligament (MCL), and posterior cruciate ligament (PCL) mimicking these signs. To our knowledge, internally displaced MPFL and MCLs have not been described as mimics for displaced meniscal fragments

The nanoscale phase distinguishing of PCL-PB-PCL blended in epoxy resin by tapping mode atomic force microscopy

Science.gov (United States)

Li, Huiqin; Sun, Limin; Shen, Guangxia; Liang, Qi

2012-02-01

In this work, we investigated the bulk phase distinguishing of the poly(ɛ-caprolactone)-polybutadiene-poly(ɛ-caprolactone) (PCL-PB-PCL) triblock copolymer blended in epoxy resin by tapping mode atomic force microscopy (TM-AFM). We found that at a set-point amplitude ratio ( r sp) less than or equal to 0.85, a clear phase contrast could be obtained using a probe with a force constant of 40 N/m. When r sp was decreased to 0.1 or less, the measured size of the PB-rich domain relatively shrank; however, the height images of the PB-rich domain would take reverse (translating from the original light to dark) at r sp = 0.85. Force-probe measurements were carried out on the phase-separated regions by TM-AFM. According to the phase shift angle vs. r sp curve, it could be concluded that the different force exerting on the epoxy matrix or on the PB-rich domain might result in the height and phase image reversion. Furthermore, the indentation depth vs. r sp plot showed that with large tapping force (lower r sp), the indentation depth for the PB-rich domain was nearly identical for the epoxy resin matrix.

The Influence of the Polymer Amount on the Biological Properties of PCL/ZrO2 Hybrid Materials Synthesized via Sol-Gel Technique

Directory of Open Access Journals (Sweden)

Michelina Catauro

2017-10-01

Full Text Available Organic/inorganic hybrid materials are attracting considerable attention in the biomedical area. The sol-gel process provides a convenient way to produce many bioactive organic–inorganic hybrids. Among those, poly(e-caprolactone/zirconia (PCL/ZrO2 hybrids have proved to be bioactive with no toxic materials. The aim of this study was to investigate the effects of these materials on the cellular response as a function of the PCL content, in order to evaluate their potential use in the biomedical field. For this purpose, PCL/ZrO2 hybrids containing 6, 12, 24, and 50 wt % of PCL were synthesized by the sol-gel method. The effects of their presence on the NIH-3T3 fibroblast cell line carrying out direct cell number counting, MTT, cell damage assays, flow cytometry-based analysis of cell-cycle progression, and immunoblotting experiments. The results confirm and extend the findings that PCL/ZrO2 hybrids are free from toxicity. The hybrids containing 12 and 24 wt % PCL, (more than 6 and 50 wt % ones enhance cell proliferation when compared to pure ZrO2 by affecting cell cycle progression. The finding that the content of PCL in PCL/ZrO2 hybrids differently supports cell proliferation suggests that PCL/ZrO2 hybrids could be useful tools with different potential clinical applications.

The Influence of the Polymer Amount on the Biological Properties of PCL/ZrO2 Hybrid Materials Synthesized via Sol-Gel Technique

Science.gov (United States)

Tranquillo, Elisabetta; Illiano, Michela; Sapio, Luigi; Spina, Annamaria; Naviglio, Silvio

2017-01-01

Organic/inorganic hybrid materials are attracting considerable attention in the biomedical area. The sol-gel process provides a convenient way to produce many bioactive organic–inorganic hybrids. Among those, poly(e-caprolactone)/zirconia (PCL/ZrO2) hybrids have proved to be bioactive with no toxic materials. The aim of this study was to investigate the effects of these materials on the cellular response as a function of the PCL content, in order to evaluate their potential use in the biomedical field. For this purpose, PCL/ZrO2 hybrids containing 6, 12, 24, and 50 wt % of PCL were synthesized by the sol-gel method. The effects of their presence on the NIH-3T3 fibroblast cell line carrying out direct cell number counting, MTT, cell damage assays, flow cytometry-based analysis of cell-cycle progression, and immunoblotting experiments. The results confirm and extend the findings that PCL/ZrO2 hybrids are free from toxicity. The hybrids containing 12 and 24 wt % PCL, (more than 6 and 50 wt % ones) enhance cell proliferation when compared to pure ZrO2 by affecting cell cycle progression. The finding that the content of PCL in PCL/ZrO2 hybrids differently supports cell proliferation suggests that PCL/ZrO2 hybrids could be useful tools with different potential clinical applications. PMID:29039803

The German version of the Posttraumatic Stress Disorder Checklist for DSM-5 (PCL-5): psychometric properties and diagnostic utility.

Science.gov (United States)

Krüger-Gottschalk, Antje; Knaevelsrud, Christine; Rau, Heinrich; Dyer, Anne; Schäfer, Ingo; Schellong, Julia; Ehring, Thomas

2017-11-28

The Posttraumatic Stress Disorder (PTSD) Checklist (PCL, now PCL-5) has recently been revised to reflect the new diagnostic criteria of the disorder. A clinical sample of trauma-exposed individuals (N = 352) was assessed with the Clinician Administered PTSD Scale for DSM-5 (CAPS-5) and the PCL-5. Internal consistencies and test-retest reliability were computed. To investigate diagnostic accuracy, we calculated receiver operating curves. Confirmatory factor analyses (CFA) were performed to analyze the structural validity. Results showed high internal consistency (α = .95), high test-retest reliability (r = .91) and a high correlation with the total severity score of the CAPS-5, r = .77. In addition, the recommended cutoff of 33 on the PCL-5 showed high diagnostic accuracy when compared to the diagnosis established by the CAPS-5. CFAs comparing the DSM-5 model with alternative models (the three-factor solution, the dysphoria, anhedonia, externalizing behavior and hybrid model) to account for the structural validity of the PCL-5 remained inconclusive. Overall, the findings show that the German PCL-5 is a reliable instrument with good diagnostic accuracy. However, more research evaluating the underlying factor structure is needed.

Preparation of porous PLLA/PCL blend by a combination of PEO phase and NaCl particulate leaching in PLLA/PCL/PEO/NaCl blend

Czech Academy of Sciences Publication Activity Database

Ezzati, P.; Ghasemi, I.; Karrabi, M.; Azizi, H.; Fortelný, Ivan

2014-01-01

Roč. 23, č. 10 (2014), s. 757-766 ISSN 1026-1265 Institutional support: RVO:61389013 Keywords : PLLA/PCL/PEO ternary blend * bio -scaffold * melts blending Subject RIV: CD - Macromolecular Chemistry Impact factor: 1.806, year: 2014

Determining the mechanical properties of electrospun poly-ε-caprolactone (PCL) nanofibers using AFM and a novel fiber anchoring technique.

Science.gov (United States)

Baker, Stephen R; Banerjee, Soham; Bonin, Keith; Guthold, Martin

2016-02-01

Due to its low cost, biocompatibility and slow bioresorption, poly-ε-caprolactone (PCL) continues to be a suitable material for select biomedical engineering applications. We used a combined atomic force microscopy (AFM)/optical microscopy technique to determine key mechanical properties of individual electrospun PCL nanofibers with diameters between 440-1040nm. Compared to protein nanofibers, PCL nanofibers showed much lower adhesion, as they slipped on the substrate when mechanically manipulated. We, therefore, first developed a novel technique to anchor individual PCL nanofibers to micrometer-sized ridges on a substrate, and then mechanically tested anchored nanofibers. When held at constant strain, tensile stress relaxed with fast and slow relaxation times of 1.0±0.3s and 8.8±3.1s, respectively. The total tensile modulus was 62±26MPa, the elastic (non-relaxing) component of the tensile modulus was 53±36MPa. Individual PCL fibers could be stretched elastically (without permanent deformation) to strains of 19-23%. PCL nanofibers are rather extensible; they could be stretched to a strain of at least 98%, and a tensile strength of at least 12MPa, before they slipped off the AFM tip. PCL nanofibers that had aged for over a month at ambient conditions became stiffer and less elastic. Our technique provides accurate nanofiber mechanical data, which are needed to guide construction of scaffolds for cells and other biomedical devices. Copyright © 2015 The Authors. Published by Elsevier B.V. All rights reserved.

Fabrication and characterization of PVA/Gum tragacanth/PCL hybrid nanofibrous scaffolds for skin substitutes.

Science.gov (United States)

Zarekhalili, Zahra; Bahrami, S Hajir; Ranjbar-Mohammadi, M; Milan, Peiman Brouki

2017-01-01

In this work three dimensional biodegradable nanofiberous scaffolds containing poly(ε-caprolactone) (PCL), poly(vinyl alcohol) (PVA) and gum tragacanth (GT) were successfully fabricated through two nozzles electrospinning process. For this purpose, PVA/GT blend (Blend: B) solution (60:40wt%) was injected from one syringe and poly(ε-caprolactone) solution from the other one. Presence of PVA and PCL in the formulation improved the electrospinning process of GT solution and mechanical properties of the fabricated nanofibers. Scanning electron microscopy (SEM) results showed uniform PVA/GT-PCL blend-hybrid (Blend-Hybrid: B-H) nanofibers with the diameter ranging about 132±27nm. Hybrid nanofibers were evaluated by Fourier transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC) tests. The antibacterial activities of the PVA/GT-PCL (B-H) nanofibers were conducted against Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus and results indicated that the hybrid nanofibers were 95.19% antibacterial against S. aureus bacterium. NIH 3T3 fibroblast cells growth and MTT assay were carried out on the scaffolds. Hydrophilicity nature, favorable mechanical properties of the fabricated hybrid nanofibers, along with their structure in biological media, biocompatibility, as well as antibacterial property indicate scaffolds prepared are suitable for tissue engineering. Copyright © 2016 Elsevier B.V. All rights reserved.

Psychometric properties of the Hare Psychopathy Checklist-Revised (PCL-R) in a representative sample of Canadian federal offenders.

Science.gov (United States)

Storey, Jennifer E; Hart, Stephen D; Cooke, David J; Michie, Christine

2016-04-01

The Hare Psychopathy Checklist-Revised (PCL-R; Hare, 2003) is a commonly used psychological test for assessing traits of psychopathic personality disorder. Despite the abundance of research using the PCL-R, the vast majority of research used samples of convenience rather than systematic methods to minimize sampling bias and maximize the generalizability of findings. This potentially complicates the interpretation of test scores and research findings, including the "norms" for offenders from the United States and Canada included in the PCL-R manual. In the current study, we evaluated the psychometric properties of PCL-R scores for all male offenders admitted to a regional reception center of the Correctional Service of Canada during a 1-year period (n = 375). Because offenders were admitted for assessment prior to institutional classification, they comprise a sample that was heterogeneous with respect to correctional risks and needs yet representative of all offenders in that region of the service. We examined the distribution of PCL-R scores, classical test theory indices of its structural reliability, the factor structure of test items, and the external correlates of test scores. The findings were highly consistent with those typically reported in previous studies. We interpret these results as indicating it is unlikely any sampling limitations of past research using the PCL-R resulted in findings that were, overall, strongly biased or unrepresentative. (c) 2016 APA, all rights reserved).

In vitro degradation of poly (L-co-D,L lactic acid containing PCL-T

Directory of Open Access Journals (Sweden)

Marcia Adriana Tomaz Duarte

2014-01-01

Full Text Available The application of polymer-based bioresorbable temporary devices in the medical field grows continuously, and professionals from several areas act to solve problems related to body functions lost due to diseases, accidents or natural wear. Here we study the influence from poly(caprolactonetriol (PCL-T on the degeneration process in the copolymer poly(L-co-DL-lactic acid (PLDLA membrane, by producing PLDLA/PCL-T blends with 90/10, 70/30 and 50/50 relative concentrations. The data for in vitro degradation showed that PCL-T decreases the rate of PLDLA. This was obtained with the following techniques: Differential Scanning Calorimetry (DSC, Thermogravimetric Analysis (TGA, Gel Permeation Chromatography (GPC and Scanning Electron Microscopy (SEM. Therefore, it is possible to vary the membrane degradation rate by changing the blend composition, which is a tool to tailor a biomaterial.

Evaluation of Single-Bundle versus Double-Bundle PCL Reconstructions with More Than 10-Year Follow-Up

Directory of Open Access Journals (Sweden)

Masataka Deie

2015-01-01

Full Text Available Background. Posterior cruciate ligament (PCL injuries are not rare in acute knee injuries, and several recent anatomical studies of the PCL and reconstructive surgical techniques have generated improved patient results. Now, we have evaluated PCL reconstructions performed by either the single-bundle or double-bundle technique in a patient group followed up retrospectively for more than 10 years. Methods. PCL reconstructions were conducted using the single-bundle (27 cases or double-bundle (13 cases method from 1999 to 2002. The mean age at surgery was 34 years in the single-bundle group and 32 years in the double-bundle group. The mean follow-up period was 12.5 years. Patients were evaluated by Lysholm scoring, the gravity sag view, and knee arthrometry. Results. The Lysholm score after surgery was 89.1±5.6 points for the single-bundle group and 91.9±4.5 points for the double-bundle group. There was no significant difference between the methods in the side-to-side differences by gravity sag view or knee arthrometer evaluation, although several cases in both groups showed a side-to-side difference exceeding 5 mm by the latter evaluation method. Conclusions. We found no significant difference between single- and double-bundle PCL reconstructions during more than 10 years of follow-up.

Efficacy of rhBMP-2 Loaded PCL/β-TCP/bdECM Scaffold Fabricated by 3D Printing Technology on Bone Regeneration

Directory of Open Access Journals (Sweden)

Eun-Bin Bae

2018-01-01

Full Text Available This study was undertaken to evaluate the effect of 3D printed polycaprolactone (PCL/β-tricalcium phosphate (β-TCP scaffold containing bone demineralized and decellularized extracellular matrix (bdECM and human recombinant bone morphogenetic protein-2 (rhBMP-2 on bone regeneration. Scaffolds were divided into PCL/β-TCP, PCL/β-TCP/bdECM, and PCL/β-TCP/bdECM/BMP groups. In vitro release kinetics of rhBMP-2 were determined with respect to cell proliferation and osteogenic differentiation. These three reconstructive materials were implanted into 8 mm diameter calvarial bone defect in male Sprague-Dawley rats. Animals were sacrificed four weeks after implantation for micro-CT, histologic, and histomorphometric analyses. The findings obtained were used to calculate new bone volumes (mm3 and new bone areas (%. Excellent cell bioactivity was observed in the PCL/β-TCP/bdECM and PCL/β-TCP/bdECM/BMP groups, and new bone volume and area were significantly higher in the PCL/β-TCP/bdECM/BMP group than in the other groups (p<.05. Within the limitations of this study, bdECM printed PCL/β-TCP scaffolds can reproduce microenvironment for cells and promote adhering and proliferating the cells onto scaffolds. Furthermore, in the rat calvarial defect model, the scaffold which printed rhBMP-2 loaded bdECM stably carries rhBMP-2 and enhances bone regeneration confirming the possibility of bdECM as rhBMP-2 carrier.

Sequential crystallization and morphology of triple crystalline biodegradable PEO-b-PCL-b-PLLA triblock terpolymers

KAUST Repository

Palacios, Jordana

2016-01-05

The sequential crystallization of poly(ethylene oxide)-b-poly(e-caprolactone)-b-poly(L-lactide) (PEO-b-PCL-b-PLLA) triblock terpolymers, in which the three blocks are able to crystallize separately and sequentially from the melt, is presented. Two terpolymers with identical PEO and PCL block lengths and two different PLLA block lengths were prepared, thus the effect of increasing PLLA content on the crystallization behavior and morphology was evaluated. Wide angle X-Ray scattering (WAXS) experiments performed on cooling from the melt confirmed the triple crystalline nature of these terpolymers and revealed that they crystallize in sequence: the PLLA block crystallizes first, then the PCL block, and finally the PEO block. Differential scanning calorimetry (DSC) analysis further demonstrated that the three blocks can crystallize from the melt when a low cooling rate is employed. The crystallization process takes place from a homogenous melt as indicated by small angle X-Ray scattering (SAXS) experiments. The crystallization and melting enthalpies and temperatures of both PEO and PCL blocks decrease as PLLA content in the terpolymer increases. Polarized light optical microscopy (PLOM) demonstrated that the PLLA block templates the morphology of the terpolymer, as it forms spherulites upon cooling from the melt. The subsequent crystallization of PCL and PEO blocks occurs inside the interlamellar regions of the previously formed PLLA block spherulites. In this way, unique triple crystalline mixed spherulitic superstructures have been observed for the first time. As the PLLA content in the terpolymer is reduced the superstructural morphology changes from spherulites to a more axialitic-like structure.

Stabilization of gold nanoparticles by thiol functionalized poly(ε-Caprolactone) for the labeling of PCL biocarrier

International Nuclear Information System (INIS)

Aryal, Santosh; Remant Bahadur, K.C.; Bhattarai, Narayan; Lee, Byoung Min; Kim, Hak Yong

2006-01-01

Polymer terminated by 2-(2,4-dinitrophenylsulfanyl) ethanol was synthesized by ring opening bulk polymerization of ε-Caprolactone initiated by the reaction product of aluminum isopropoxide and 2-(2,4-dinitrophenylsulfenyl) ethanol. The corresponding thiolyated poly(ε-Caprolactone) (PCL) was obtained after removal of protecting group under slightly basic condition. Both of PCL end capped by protected thiol and thiolyated PCL (PCLS-H) were characterized by 1 H NMR and the molecular weights were determined by gel permeation chromatography (GPC). Decrease in polydispersity after deprotection was observed. The PCLS-H can be grafted to the gold nanoparticles either by direct incorporation or ligand exchange with the existing undecanethiol on the gold nanoparticles. The resulting nanoparticles were characterized by Raman spectroscopy and transmission electron microscope (TEM). Mixed ligands stabilized gold nanoparticles were further used for the labeling of PCL biocarrier by nanoprecipitation. The sizes of these nanoparticles-labeled biocarrier were determined by TEM. This is an easy and convenient way to label biocarrier by the gold nanoparticles based contrasting agent in order to study its consequences in vivo

Active Bilayer PE/PCL Films for Food Packaging Modified with Zinc Oxide and Casein

OpenAIRE

Rešček, Ana; Kratofil Krehula, Ljerka; Katančić, Zvonimir; Hrnjak-Murgić, Zlata

2015-01-01

This paper studies the properties of active polymer food packaging bilayer polyethylene/polycaprolactone (PE/PCL) films. Such packaging material consists of primary PE layer coated with thin film of PCL coating modified with active component (zinc oxide or zinc oxide/casein complex) with intention to extend the shelf life of food and to maintain the quality and health safety. The influence of additives as active components on barrier, mechanical, thermal and antimicrobial properties of such m...

PSMA ligand conjugated PCL-PEG polymeric micelles targeted to prostate cancer cells.

Directory of Open Access Journals (Sweden)

Jian Jin

Full Text Available In this content, a small molecular ligand of prostate specific membrane antigen (SMLP conjugated poly (caprolactone (PCL-b-poly (ethylene glycol (PEG copolymers with different block lengths were synthesized to construct a satisfactory drug delivery system. Four different docetaxel-loaded polymeric micelles (DTX-PMs were prepared by dialysis with particle sizes less than 60 nm as characterized by dynamic light scattering (DLS and transmission electron microscope (TEM. Optimization of the prepared micelles was conducted based on short-term stability and drug-loading content. The results showed that optimized systems were able to remain stable over 7 days. Compared with Taxotere, DTX-PMs with the same ratio of hydrophilic/hydrophobic chain length displayed similar sustained release behaviors. The cytotoxicity of the optimized targeted DTX-PCL12K-PEG5K-SMLP micelles (DTX-PMs2 and non-targeted DTX-PCL12K-mPEG5K micelles (DTX-PMs1 were evaluated by MTT assays using prostate specific membrane antigen (PSMA positive prostate adenocarcinoma cells (LNCaP. The results showed that the targeted micelles had a much lower IC50 than their non-targeted counterparts (48 h: 0.87 ± 0.27 vs 13.48 ± 1.03 µg/ml; 72 h: 0.02 ± 0.008 vs 1.35 ± 0.54 µg/ml. In vitro cellular uptake of PMs2 showed 5-fold higher fluorescence intensity than that of PMs1 after 4 h incubation. According to these results, the novel nano-sized drug delivery system based on DTX-PCL-PEG-SMLP offers great promise for the treatment of prostatic cancer.

The sharp edge: a frequent radiographic sign in neonatal pneumothorax

International Nuclear Information System (INIS)

Oestreich, A.E.

1987-01-01

The sharp edge sign, an unusually sharply defined silhouette of the heart and/or hemidiaphragm on frontal radiographs of the supine neonate, has been valuable in the initial recognition of pneumothorax. In a prospective study of 50 neonatal pneumothoraces, a sharp edge sign was present on the initial pneumothorax film 49 times. In seven of these, only the hemidiaphragm showed a sharp edge, while the heart margin was superimposed on the vertebral column. Greater awareness of the sharp edge sign would promote earlier recognition of neonatal pneumothorax. 6 refs.; 3 figs

Codelivery of curcumin and doxorubicin by MPEG-PCL results in improved efficacy of systemically administered chemotherapy in mice with lung cancer

Directory of Open Access Journals (Sweden)

Wang BL

2013-09-01

Full Text Available Bi-Lan Wang,1,* Yong-mei Shen,1,3,* Qiong-wen Zhang,1,* Yu-li Li,1 Min Luo,1 Ze Liu,1,2 Yan Li,1 Zhi-yong Qian,1 Xiang Gao,1 Hua-shan Shi1,2 1State Key Laboratory of Biotherapy and Cancer Center, West China Hospital, West China Medicine School, Sichuan University, Chengdu, Sichuan, 2State Key Laboratory of Biotherapy and Department of Head and Neck Oncology, West China Hospital, West China Medical School, Sichuan University, Chengdu, Sichuan, 3Sichuang Haoyisheng Pharmacy, Chengdu, People’s Republic of China *These authors contributed equally to this work Abstract: Systemic administration of chemotherapy for cancer often has toxic side effects, limiting the doses that can be used in its treatment. In this study, we developed methoxy poly(ethylene glycol-poly(caprolactone (MPEG-PCL micelles loaded with curcumin and doxorubicin (Cur-Dox/MPEG-PCL that were tolerated by recipient mice and had enhanced antitumor effects and fewer side effects. It was shown that these Cur-Dox/MPEG-PCL micelles could release curcumin and doxorubicin slowly in vitro. The long circulation time of MPEG-PCL micelles and the slow rate of release of curcumin and doxorubicin in vivo may help to maintain plasma concentrations of active drug. We also demonstrated that Cur-Dox/MPEG-PCL had improved antitumor effects both in vivo and in vitro. The mechanism by which Cur-Dox/MPEG-PCL micelles inhibit lung cancer might involve increased apoptosis of tumor cells and inhibition of tumor angiogenesis. We found advantages using Cur-Dox/MPEG-PCL micelles in the treatment of cancer, with Cur-Dox/MPEG-PCL achieving better inhibition of LL/2 lung cancer growth in vivo and in vitro. Our study indicates that Cur-Dox/MPEG-PCL micelles may be an effective treatment strategy for cancer in the future. Keywords: methoxy poly(ethylene glycol, poly(caprolactone, curcumin, doxorubicin, micelles, cancer, treatment

The influence of soil and landfill leachate microorganisms in the degradation of PVC/PCL films cast from DMF

Directory of Open Access Journals (Sweden)

Adriana de Campos

2012-01-01

Full Text Available While the use of plastics continues to increase in our daily lives in a growing range products, these materials are very persistent in the environment. The blending of aliphatic polyesters with other thermoplastic polymers is a profitable way of producing materials with changed physical properties and biodegradability, which can facilitate microbial adhesion to the polymer matrix and help to reduce (post-consumer degradation time of these materials in landfills. This study was an investigation of the biodegradation of films of blends of poly(vinyl chloride (PVC and poly(ε-caprolactone (PCL by soil microorganisms and leachate, by means of respirometry, infrared absorption spectroscopy (FTIR, differential calorimetry scanning (DSC, scanning electron microscopy (SEM, contact angle and weight loss. The results showed that in the soil, the films suffered oxidative biodegradation. The PCL promoted degradation of the PVC in the film of PVC/PCL and the PVC inhibited the rapid degradation of the PCL.

Comparative Study of the Physical, Topographical and Biological Properties of Electrospinning PCL, PLLA, their Blend and Copolymer Scaffolds

Science.gov (United States)

Bolbasov, E.; Goreninskii, S.; Tverdokhlebov, S.; Mishanin, A.; Viknianshchuk, A.; Bezuidenhout, D.; Golovkin, A.

2018-05-01

Biodegradable polymers (blends, copolymers) could be the ideal materials for manufacturing of scaffolds for small diameter vascular graft. Such material characteristics as mechanical properties, chemical structure, nano- and micro topography, surface charge, porosity, wettability etc. are becoming the most important aspects for effectiveness of prosthesis biofunctionalization because of their great impact on cell adhesion, spreading, cell proliferation, differentiation and cell function. The aim of the study is to compare physical, topographical and biological properties of polycaprolactone (PCL), poly-L-lactic acid (PLLA), polycaprolactone + poly-L-lactic acid blend (PCL PLLA), L-lactide/Caprolactone copolymer (PLC7015) scaffolds fabricated with the same fiber thickness using electrospun technology. PCL PLLA scaffolds had the highest average pore area (pactive phase of adhesion process. We propose that physical and topographical properties of PCL, PLLA, their blend and copolymer are of a great dependence of chemical structure but could be changed during the manufacturing process that will lead to changes in biological properties.

Predicting violent infractions in a Swiss state penitentiary: A replication study of the PCL-R in a population of sex and violent offenders

Directory of Open Access Journals (Sweden)

Laubacher Arja

2008-09-01

Full Text Available Abstract Background Research conducted with forensic psychiatric patients found moderate correlations between violence in institutions and psychopathy. It is unclear though, whether the PCL-R is an accurate instrument for predicting aggressive behavior in prisons. Results seem to indicate that the instrument is better suited for predicting verbal rather than physical aggression of prison inmates. Methods PCL-R scores were assessed for a sample of 113 imprisoned sex and violent offenders in Switzerland. Logistic regression analyses were used to estimate physical and verbal aggression as a function of the PCL-R sum score. Additionally, stratified analyses were conducted for Factor 1 and 2. Infractions were analyzed as to their motives and consequences. Results The mean score of the PCL-R was 12 points. Neither the relationship between physical aggression and the sum score of the PCL-R, nor the relationship between physical aggression and either of the two factors of the PCL-R were significant. Both the sum score and Factor 1 predicted the occurrence of verbal aggression (AUC = 0.70 and 0.69, while Factor 2 did not. Conclusion Possible explanations are discussed for the weak relationship between PCL-R scores and physically aggressive behavior during imprisonment. Some authors have discussed whether the low base rate of violent infractions can be considered an explanation for the non-significant relation between PCL-R-score and violence. The base rate in this study, however, with 27%, was not low. It is proposed that the distinction between reactive and instrumental motives of institutional violence must be considered when examining the usefulness of the PCL-R in predicting in-prison physical aggressive behavior.

Immobilization of Platelet-Rich Plasma onto COOH Plasma-Coated PCL Nanofibers Boost Viability and Proliferation of Human Mesenchymal Stem Cells

Directory of Open Access Journals (Sweden)

Anastasiya Solovieva

2017-12-01

Full Text Available The scaffolds made of polycaprolactone (PCL are actively employed in different areas of biology and medicine, especially in tissue engineering. However, the usage of unmodified PCL is significantly restricted by the hydrophobicity of its surface, due to the fact that its inert surface hinders the adhesion of cells and the cell interactions on PCL surface. In this work, the surface of PCL nanofibers is modified by Ar/CO2/C2H4 plasma depositing active COOH groups in the amount of 0.57 at % that were later used for the immobilization of platelet-rich plasma (PRP. The modification of PCL nanofibers significantly enhances the viability and proliferation (by hundred times of human mesenchymal stem cells, and decreases apoptotic cell death to a normal level. According to X-ray photoelectron spectroscopy (XPS, after immobilization of PRP, up to 10.7 at % of nitrogen was incorporated into the nanofibers surface confirming the grafting of proteins. Active proliferation and sustaining the cell viability on nanofibers with immobilized PRP led to an average number of cells of 258 ± 12.9 and 364 ± 34.5 for nanofibers with ionic and covalent bonding of PRP, respectively. Hence, our new method for the modification of PCL nanofibers with PRP opens new possibilities for its application in tissue engineering.

Precision extruding deposition (PED) fabrication of polycaprolactone (PCL) scaffolds for bone tissue engineering

Energy Technology Data Exchange (ETDEWEB)

Shor, Lauren; Gueceri, Selcuk; Chang, Robert; Sun Wei [Department of Mechanical Engineering and Mechanics, Drexel University, Philadelphia, PA (United States); Gordon, Jennifer; Kang Qian; Hartsock, Langdon; An Yuehuei [Department of Orthopedic Surgery, Medical University of South Carolina, Charleston, SC (United States)], E-mail: st963bya@drexel.edu, E-mail: guceri@drexel.edu, E-mail: rcc34@drexel.edu, E-mail: sunwei@drexel.edu, E-mail: kangqk@musc.edu, E-mail: hartsock@musc.edu, E-mail: any@musc.edu

2009-03-01

Bone tissue engineering is an emerging field providing viable substitutes for bone regeneration. Recent advances have allowed scientists and engineers to develop scaffolds for guided bone growth. However, success requires scaffolds to have specific macroscopic geometries and internal architectures conducive to biological and biophysical functions. Freeform fabrication provides an effective process tool to manufacture three-dimensional porous scaffolds with complex shapes and designed properties. A novel precision extruding deposition (PED) technique was developed to fabricate polycaprolactone (PCL) scaffolds. It was possible to manufacture scaffolds with a controlled pore size of 350 {mu}m with designed structural orientations using this method. The scaffold morphology, internal micro-architecture and mechanical properties were evaluated using scanning electron microscopy (SEM), micro-computed tomography (micro-CT) and mechanical testing, respectively. An in vitro cell-scaffold interaction study was carried out using primary fetal bovine osteoblasts. Specifically, the cell proliferation and differentiation was evaluated by Alamar Blue assay for cell metabolic activity, alkaline phosphatase activity and osteoblast production of calcium. An in vivo study was performed on nude mice to determine the capability of osteoblast-seeded PCL to induce osteogenesis. Each scaffold was implanted subcutaneously in nude mice and, following sacrifice, was explanted at one of a series of time intervals. The explants were then evaluated histologically for possible areas of osseointegration. Microscopy and radiological examination showed multiple areas of osseous ingrowth suggesting that the osteoblast-seeded PCL scaffolds evoke osteogenesis in vivo. These studies demonstrated the viability of the PED process to fabricate PCL scaffolds having the necessary mechanical properties, structural integrity, and controlled pore size and interconnectivity desired for bone tissue engineering.

Precision extruding deposition (PED) fabrication of polycaprolactone (PCL) scaffolds for bone tissue engineering

International Nuclear Information System (INIS)

Shor, Lauren; Gueceri, Selcuk; Chang, Robert; Sun Wei; Gordon, Jennifer; Kang Qian; Hartsock, Langdon; An Yuehuei

2009-01-01

Bone tissue engineering is an emerging field providing viable substitutes for bone regeneration. Recent advances have allowed scientists and engineers to develop scaffolds for guided bone growth. However, success requires scaffolds to have specific macroscopic geometries and internal architectures conducive to biological and biophysical functions. Freeform fabrication provides an effective process tool to manufacture three-dimensional porous scaffolds with complex shapes and designed properties. A novel precision extruding deposition (PED) technique was developed to fabricate polycaprolactone (PCL) scaffolds. It was possible to manufacture scaffolds with a controlled pore size of 350 μm with designed structural orientations using this method. The scaffold morphology, internal micro-architecture and mechanical properties were evaluated using scanning electron microscopy (SEM), micro-computed tomography (micro-CT) and mechanical testing, respectively. An in vitro cell-scaffold interaction study was carried out using primary fetal bovine osteoblasts. Specifically, the cell proliferation and differentiation was evaluated by Alamar Blue assay for cell metabolic activity, alkaline phosphatase activity and osteoblast production of calcium. An in vivo study was performed on nude mice to determine the capability of osteoblast-seeded PCL to induce osteogenesis. Each scaffold was implanted subcutaneously in nude mice and, following sacrifice, was explanted at one of a series of time intervals. The explants were then evaluated histologically for possible areas of osseointegration. Microscopy and radiological examination showed multiple areas of osseous ingrowth suggesting that the osteoblast-seeded PCL scaffolds evoke osteogenesis in vivo. These studies demonstrated the viability of the PED process to fabricate PCL scaffolds having the necessary mechanical properties, structural integrity, and controlled pore size and interconnectivity desired for bone tissue engineering

Viscoelastic properties of PLA/PCL blends compatibilized with different methods

Science.gov (United States)

Shin, Boo Young; Han, Do Hung

2017-11-01

The aim of this study was to observe changes in the viscoelastic properties of PLA/PCL (80/20) blends produced using different compatibilization methods. Reactive extrusion and high-energy radiation methods were used for blend compatibilization. Storage and loss moduli, complex viscosity, transient stress relaxation modulus, and tan δ of blends were analyzed and blend morphologies were examined. All compatibilized PLA/PCL blends had smaller dispersed particle sizes than the non-compatibilized blend, and well compatibilized blends had finer morphologies than poorly compatibilized blends. Viscoelastic properties differentiated well compatibilized and poorly compatibilized blends. Well compatibilized blends had higher storage and loss moduli and complex viscosities than those calculated by the log-additive mixing rule due to strong interfacial adhesion, whereas poorly compatibilized blends showed negative deviations due to weak interfacial adhesion. Moreover, well compatibilized blends had much slower stress relaxation than poorly compatibilized blends and didn't show tan δ plateau region caused by slippage at the interface between continuous and dispersed phases.

Psychometric Validation of the English and French Versions of the Posttraumatic Stress Disorder Checklist for DSM-5 (PCL-5)

Science.gov (United States)

Ashbaugh, Andrea R.; Houle-Johnson, Stephanie; Herbert, Christophe; El-Hage, Wissam; Brunet, Alain

2016-01-01

The purpose of this study is to assess the psychometric properties of a French version of the Posttraumatic Stress Disorder Checklist for DSM-5 (PCL-5), a self-report measure of posttraumatic stress disorder (PTSD) symptoms, and to further validate the existing English version of the measure. Undergraduate students (n = 838 English, n = 262 French) completed the PCL-5 as well as other self-report symptom measures of PTSD and depression online. Both the English and French versions PCL-5 total scores demonstrated excellent internal consistency (English: α = .95; French: α = .94), and strong convergent and divergent validity. Strong internal consistency was also observed for each of the four subscales for each version (α’s > .79). Test-retest reliability for the French version of the measure was also very good (r = .89). Confirmatory factor analysis indicated that the four-factor DSM-5 model was not a good fit of the data. The seven-factor hybrid model best fit the data in each sample, but was only marginally superior to the six-factor anhedonia model. The French version of the PCL-5 demonstrated the same psychometric qualities as both the English version of the same measure and previous versions of the PCL. Thus clinicians serving French-speaking clients now have access to this highly used screening instrument. With regards to the structural validity of the PCL-5 and of the new PTSD diagnostic structure of the DSM-5, additional research is warranted. Replication of our results in clinical samples is much needed. PMID:27723815

ESTUDIO FISICOQUÍMICO DE MEZCLAS DE ALMIDÓN TERMOPLÁSTICO (TPS Y POLICAPROLACTONA (PCL

Directory of Open Access Journals (Sweden)

JOSE MINA H.

Full Text Available Se estudiaron las propiedades físico-químicas de un almidón termoplástico (TPS de yuca, plastificado con glicerol, y el efecto de la incorporación de policaprolactona (PCL en el desarrollo de tres mezclas binarias TPS-PCL a proporciones 60-40, 50-50 y 40-60. El estudio inició con la preparación por extrusión del TPS y su posterior mezcla en caliente con la policaprolactona. El análisis de los resultados se enfocó principalmente a la identificación y seguimiento de la retrogradación, que se dio en el almidón termoplástico para diferentes tiempos de acondicionamiento (a 54% H.R. y 25ºC. Con el proceso de plastificación del almidón se generó una masa predominantemente amorfa, evidenciada por los resultados obtenidos con SEM, DRX y FTIR. Con la incorporación de la PCL se obtuvieron mezclas inmiscibles, en las cuales el TPS se constituyó en la fase dispersa y que conservaron una tendencia en la variación de las propiedades con el tiempo de acondicionamiento, similar a la observada en el TPS solo; indicando este hecho que las interacciones físico-químicas generadas entre el TPS y la policaprolactona no fueron lo suficientemente fuertes, como para incidir en la variación estructural del TPS, la cual se dio independiente del contenido de PCL.

Starch/PCL composite nanofibers by co-axial electrospinning technique for biomedical applications.

Science.gov (United States)

Komur, B; Bayrak, F; Ekren, N; Eroglu, M S; Oktar, F N; Sinirlioglu, Z A; Yucel, S; Guler, O; Gunduz, O

2017-03-29

In this study, starch and polycaprolactone (PCL), composite nanofibers were fabricated by co-axial needle electrospinning technique. Processing parameters such as polymer concentration, flow rate and voltage had a marked influence on the composite fiber diameter. Fourier transform infrared spectroscopy, scanning electron microscopy (SEM), mechanical and physical properties (such as density, viscosity and electrical conductivity) of the composite fibres were evaluated. Moreover, a cell culture test was performed in order to determine their cytotoxicity for wound dressing application. The effect of starch ratio in the solution on the properties and morphological structure of the fibers produced was presented. With lower starch concentration values, the fibers have greater ultimate tensile strength characteristic (mostly 4 and 5 wt%). According to SEM results, it can be figured out that the nanofibers fabricated have good spinnability and morphology. The mean diameter of the fibers is about 150 nm. According to results of cell culture study, the finding can be determined that the increase of starch in the fiber also increases the cell viability. Composite nanofibers of starch/PCL have been prepared using a co-axial needle electrospinning technique. PCL was successfully encapsulated within starch. Fiber formation was observed for different ratio of starch. With several test, analysis and measurement performed, some important parameters such as quality and effectuality of each fiber obtained for wound dressing applications were discussed in detail.

Adhesion and metabolic activity of human corneal cells on PCL based nanofiber matrices

Energy Technology Data Exchange (ETDEWEB)

Stafiej, Piotr; Küng, Florian [Department of Ophthalmology, Universität Erlangen-Nürnberg, Schwabachanlage 6, 91054 Erlangen (Germany); Institute of Polymer Materials, Universität Erlangen-Nürnberg, Martensstraße 7, 91054 Erlangen (Germany); Thieme, Daniel; Czugala, Marta; Kruse, Friedrich E. [Department of Ophthalmology, Universität Erlangen-Nürnberg, Schwabachanlage 6, 91054 Erlangen (Germany); Schubert, Dirk W. [Institute of Polymer Materials, Universität Erlangen-Nürnberg, Martensstraße 7, 91054 Erlangen (Germany); Fuchsluger, Thomas A., E-mail: thomas.fuchsluger@uk-erlangen.de [Department of Ophthalmology, Universität Erlangen-Nürnberg, Schwabachanlage 6, 91054 Erlangen (Germany)

2017-02-01

In this work, polycaprolactone (PCL) was used as a basic polymer for electrospinning of random and aligned nanofiber matrices. Our aim was to develop a biocompatible substrate for ophthalmological application to improve wound closure in defects of the cornea as replacement for human amniotic membrane. We investigated whether blending the hydrophobic PCL with poly (glycerol sebacate) (PGS) or chitosan (CHI) improves the biocompatibility of the matrices for cell expansion. Human corneal epithelial cells (HCEp) and human corneal keratocytes (HCK) were used for in vitro biocompatibility studies. After optimization of the electrospinning parameters for all blends, scanning electron microscopy (SEM), attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), and water contact angle were used to characterize the different matrices. Fluorescence staining of the F-actin cytoskeleton of the cells was performed to analyze the adherence of the cells to the different matrices. Metabolic activity of the cells was measured by cell counting kit-8 (CCK-8) for 20 days to compare the biocompatibility of the materials. Our results show the feasibility of producing uniform nanofiber matrices with and without orientation for the used blends. All materials support adherence and proliferation of human corneal cell lines with oriented growth on aligned matrices. Although hydrophobicity of the materials was lowered by blending PCL, no increase in biocompatibility or proliferation, as was expected, could be measured. All tested matrices supported the expansion of human corneal cells, confirming their potential as substrates for biomedical applications. - Highlights: • PCL was blended with chitosan and poly(glycerol sebacate) for electrospinning. • Biocompatibility was proven with two human corneal cell lines. • Both cell lines adhered and proliferated on random and aligned nanofiber matrices. • Cytoskeletal orientation is shown on aligned nanofiber matrices. �

Antioxidative study of Cerium Oxide nanoparticle functionalised PCL-Gelatin electrospun fibers for wound healing application

Directory of Open Access Journals (Sweden)

Hilal Ahmad Rather

2018-06-01

Full Text Available Skin wound healing involves a coordinated cellular response to achieve complete reepithelialisation. Elevated levels of reactive oxygen species (ROS in the wound environment often pose a hindrance in wound healing resulting in impaired wound healing process. Cerium oxide nanoparticles (CeNPs have the ability to protect the cells from oxidative damage by actively scavenging the ROS. Furthermore, matrices like nanofibers have also been explored for enhancing wound healing. In the current study CeNP functionalised polycaprolactone (PCL-gelatin nanofiber (PGNPNF mesh was fabricated by electrospinning and evaluated for its antioxidative potential. Wide angle XRD analysis of randomly oriented nanofibers revealed ∼2.6 times reduced crystallinity than pristine PCL which aided in rapid degradation of nanofibers and release of CeNP. However, bioactive composite made between nanoparticles and PCL-gelatin maintained the fibrous morphology of PGNPNF upto 14 days. The PGNPNF mesh exhibited a superoxide dismutase (SOD mimetic activity due to the incorporated CeNPs. The PGNPNF mesh enhanced proliferation of 3T3-L1 cells by ∼48% as confirmed by alamar blue assay and SEM micrographs of cells grown on the nanofibrous mesh. Furthermore, the PGNPNF mesh scavenged ROS, which was measured by relative DCF intensity and fluorescence microscopy; and subsequently increased the viability and proliferation of cells by three folds as it alleviated the oxidative stress. Overall, the results of this study suggest the potential of CeNP functionalised PCL-gelatin nanofibrous mesh for wound healing applications.

Influence of processing temperature on the rheological behavior of PCL/MMT nanocomposites

International Nuclear Information System (INIS)

Marini, Juliano; Beatrice, Cesar A.G.; Favaro, Marcia M.; Bretas, Rosario E.S.; Branciforti, Marcia C.

2009-01-01

Polycaprolactone (PCL) is a biodegradable polymer; however, this polymer had low mechanical strength, limiting its applications. The addition of a lamellar silicate (MMT) can alter this behavior, especially when the filler is well dispersed and distributed thru the polymeric matrix. In this work the influence of the processing temperature in the structure of PCL/MMT nanocomposites was studied. The nanocomposites were obtained by melt intercalation in a Haake rheometer at two temperatures: 80 and 120 deg C. Wide angle X-ray analysis showed that the intercalation of the polymer chains into the clay's galleries was not influenced by the processing temperature. However, the steady state and dynamic rheological properties showed that the higher the processing temperature the better the dispersion and distribution of the clay thru the matrix, without having polymer degradation. (author)

Acetal-Linked Paclitaxel Polymeric Prodrug Based on Functionalized mPEG-PCL Diblock Polymer for pH-Triggered Drug Delivery

Directory of Open Access Journals (Sweden)

Yinglei Zhai

2017-12-01

Full Text Available The differences in micro-environment between cancer cells and the normal ones offer the possibility to develop stimuli-responsive drug-delivery systems for overcoming the drawbacks in the clinical use of anticancer drugs, such as paclitaxel, doxorubicin, and etc. Hence, we developed a novel endosomal pH-sensitive paclitaxel (PTX prodrug micelles based on functionalized poly(ethylene glycol-poly(ε-caprolactone (mPEG-PCL diblock polymer with an acid-cleavable acetal (Ace linkage (mPEG-PCL-Ace-PTX. The mPEG-PCL-Ace-PTX5 with a high drug content of 23.5 wt % was self-assembled in phosphate buffer (pH 7.4, 10 mM into nanosized micelles with an average diameter of 68.5 nm. The in vitro release studies demonstrated that mPEG-PCL-Ace-PTX5 micelles was highly pH-sensitive, in which 16.8%, 32.8%, and 48.2% of parent free PTX was released from mPEG-PCL-Ace-PTX5 micelles in 48 h at pH 7.4, 6.0, and 5.0, respectively. Thiazolyl Blue Tetrazolium Bromide (MTT assays suggested that the pH-sensitive PTX prodrug micelles displayed higher therapeutic efficacy against MCF-7 cells compared with free PTX. Therefore, the PTX prodrug micelles with acetal bond may offer a promising strategy for cancer therapy.

Comparative Efficacies of a 3D-Printed PCL/PLGA/β-TCP Membrane and a Titanium Membrane for Guided Bone Regeneration in Beagle Dogs

Directory of Open Access Journals (Sweden)

Jin-Hyung Shim

2015-10-01

Full Text Available This study was conducted to evaluate the effects of a 3D-printed resorbable polycaprolactone/poly(lactic-co-glycolic acid/β-tricalcium phosphate (PCL/PLGA/β-TCP membrane on bone regeneration and osseointegration in areas surrounding implants and to compare results with those of a non-resorbable titanium mesh membrane. After preparation of PCL/PLGA/β-TCP membranes using extrusion-based 3D printing technology; mechanical tensile testing and in vitro cell proliferation testing were performed. Implant surgery and guided bone regeneration were performed randomly in three groups (a no membrane group, a titanium membrane group, and a PCL/PLGA/β-TCP membrane group (n = 8 per group. Histological and histometric analyses were conducted to evaluate effects on bone regeneration and osseointegration. Using the results of mechanical testing; a PCL/PLGA/β-TCP ratio of 2:6:2 was selected. The new bone areas (% in buccal defects around implants were highest in the PCL/PLGA/β-TCP group and significantly higher than in the control group (p < 0.05. Bone-to-implant contact ratios (% were also significantly higher in the PCL/PLGA/β-TCP and titanium groups than in the control group (p < 0.05. When the guided bone regeneration procedure was performed using the PCL/PLGA/β-TCP membrane; new bone formation around the implant and osseointegration were not inferior to those of the non-resorbable pre-formed titanium mesh membrane.

Rationalization of specific structure formation in electrospinning process: Study on nano-fibrous PCL- and PLGA-based scaffolds.

Science.gov (United States)

Saeed, Mahdi; Mirzadeh, Hamid; Zandi, Mojgan; Irani, Shiva; Barzin, Jalal

2015-12-01

Formation of specific structures on poly-ɛ-caprolactone (PCL) and poly lactide-co-glycolide (PLGA) based electrospun mats is rationalized and the effect of interactive parameters; high voltage and flow rate on unique surface topography is evaluated. By increasing the collecting time in electrospinning process and enhancing fiber to fiber repulsion, surface characteristics of mats changes from nano- to micro-topography. In this study surface topography of the fabricated mats based on PCL and PLGA were assessed using AFM and SEM techniques to display the distinct phenomenon occurs on collected random fibers. In this research the rationale behind the formation of bump and flower like structures on fibrous mats was discussed. Because of great potential application of the fabricated substrates in the fields of medical purposes, cell-matrix interaction was evaluated and in vitro biological test with human dermal fibroblast and mouse L929 fibroblast cells was performed to study the cell responses to different roughness of nano-fibers collected at different time intervals. Our results show that after 7 days, cell proliferation is improved on PCL collected at 40 min in the case of human fibroblast cells and on PCL collected in 70 min in the case of L929 mouse fibroblast cells. © 2015 Wiley Periodicals, Inc.

Atmospheric plasma surface modifications of electrospun PCL/chitosan/PCL hybrid scaffolds by nozzle type plasma jets for usage of cell cultivation

Science.gov (United States)

Surucu, Seda; Masur, Kai; Turkoglu Sasmazel, Hilal; Von Woedtke, Thomas; Weltmann, Klaus Dieter

2016-11-01

This paper reports Ar gas, Ar + O2, Ar + O2 + N2 gas mixtures and dry air plasma modifications by atmospheric pressure argon driven kINPen and air driven Diener (PlasmaBeam) plasma jets to alter surface properties of three dimensional (3D), electrospun PCL/Chitosan/PCL layer by layer hybrid scaffolds to improve human fibroblast (MRC5) cell attachment and growth. The characterizations of the samples were done by contact angle (CA) measurements, scanning electron microscopy (SEM), X-Ray Photoelectron spectroscopy (XPS) analysis. The results showed that the plasma modification carried out under dry air and Ar + O2 + N2 gas mixtures were altered effectively the nanotopography and the functionality of the material surfaces. It was found that the samples treated with Ar + O2 + N2 gas mixtures for 1 min and dry air for 9 min have better hydrophilicity 78.9° ± 1.0 and 75.6° ± 0.1, respectively compared to the untreated samples (126.5°). Biocompatibility performance of the scaffolds was determined with alamarBlue (aB) assay and MTT assay methods, Giemsa staining, fluorescence microscope, confocal laser scanning microscope (CLSM) and scanning electron microscope (SEM) analyses. The results showed that plasma treated samples increased the hydrophilicity and oxygen functionality and topography of the surfaces significantly, thus affecting the cell viability and proliferation on/within scaffolds.

Production of CNT-taxol-embedded PCL microspheres using an ammonium-based room temperature ionic liquid: as a sustained drug delivery system.

Science.gov (United States)

Kim, Seong Yeol; Hwang, Ji-Young; Seo, Jae-Won; Shin, Ueon Sang

2015-03-15

We describe a one-pot method for the mass production of polymeric microspheres containing water-soluble carbon-nanotube (w-CNT)-taxol complexes using an ammonium-based room temperature ionic liquid. Polycaprolactone (PCL), trioctylmethylammonium chloride (TOMAC; liquid state from -20 to 240°C), and taxol were used, respectively, as a model polymer, room temperature ionic liquid, and drug. Large quantities of white colored PCL powder without w-CNT-taxol complexes and gray colored PCL powders containing w-CNT-taxol (1:1 or 1:2 wt/wt) complexes were produced by phase separation between the hydrophilic TOMAC and the hydrophobic PCL. Both microsphere types had a uniform, spherical structure of average diameter 3-5μm. The amount of taxol embedded in PCL microspheres was determined by HPLC and (1)H NMR to be 8-12μg per 1.0mg of PCL (loading capacity (LC): 0.8-1.2%; entrapment efficiency (EE): 16-24%). An in vitro HPLC release assay showed sustain release of taxol without an initial burst over 60days at an average rate of 0.003-0.0073mg per day. The viability patterns of human breast cancer cells (MCF-7) for PCTx-1 and -2 showed dose-dependent inhibitory effects. In the presence of PCTx-1 and -2, the MCF-7 cells showed high viability in the concentration level of, respectably, <70 and <5μg/mL. Copyright © 2014 Elsevier Inc. All rights reserved.

Surface modification of Ti-30Ta alloy by electrospun PCL deposition

Energy Technology Data Exchange (ETDEWEB)

Wada, C.M.; Rangel, A.L.R.; Souza, M.A. de; Claro, A.P.R.A.; Rezende, M.C.R. [Universidade Estadual Paulista Julio de Mesquita Filho (UNESP), SP (Brazil); Almeida, R. dos S. [Universidade Estadual de Campinas (UNICAMP), SP (Brazil)

2014-07-01

Full text: Surface modifications techniques have been used for change the inert surface of the titanium alloys for better interaction. Ingots of the experimental alloy Ti30Ta were melted in an arc furnace and re-melted ten times at least. They were homogenized under vacuum at 1000 °C for 86. 4 ks to eliminate chemical segregation and cold-worked by swaging. Discs were immersed in aqueous NaOH solution for 24 h, dried at room temperature, immersed in HCl and dried at 40 °C in oven for 24 hours. Followed, PCL fibers were deposited on the Ti30Ta alloy discs surfaces by electrospinning. Plasma treatment was carried out for change PCL electrospun by using stainless steel plasma reactor. Samples were immersed in SBF 5x solution for apatite growth. Surfaces were evaluated by using SEM, X-rays diffraction and contact angle. Samples exhibited hydrophilic behavior after plasma treatment and SBF immersion. Results are very interesting for biomedical applications. (author)

Surface modification of Ti-30Ta alloy by electrospun PCL deposition

International Nuclear Information System (INIS)

Wada, C.M.; Rangel, A.L.R.; Souza, M.A. de; Claro, A.P.R.A.; Rezende, M.C.R.; Almeida, R. dos S.

2014-01-01

Full text: Surface modifications techniques have been used for change the inert surface of the titanium alloys for better interaction. Ingots of the experimental alloy Ti30Ta were melted in an arc furnace and re-melted ten times at least. They were homogenized under vacuum at 1000 °C for 86. 4 ks to eliminate chemical segregation and cold-worked by swaging. Discs were immersed in aqueous NaOH solution for 24 h, dried at room temperature, immersed in HCl and dried at 40 °C in oven for 24 hours. Followed, PCL fibers were deposited on the Ti30Ta alloy discs surfaces by electrospinning. Plasma treatment was carried out for change PCL electrospun by using stainless steel plasma reactor. Samples were immersed in SBF 5x solution for apatite growth. Surfaces were evaluated by using SEM, X-rays diffraction and contact angle. Samples exhibited hydrophilic behavior after plasma treatment and SBF immersion. Results are very interesting for biomedical applications. (author)

Using MMPI-2-RF Correlates to Elucidate the PCL-R and Its Four Facets in a Sample of Male Forensic Psychiatric Patients.

Science.gov (United States)

Klein Haneveld, Evelyn; Kamphuis, Jan H; Smid, Wineke; Forbey, Johnathan D

2017-01-01

This study documents the associations between the MMPI-2-RF (Ben-Porath & Tellegen, 2008 ) scale scores and the Psychopathy Checklist Revised (PCL-R; Hare, 2003 ) facet scores in a forensic psychiatric sample. Objectives were to determine how the MMPI-2-RF scales might enhance substantive understanding of the nature of the 4 PCL-R facets and to discern possible implications for the treatment of psychopathic patients. A sample of 127 male forensic psychiatric offenders admitted to a Dutch forensic psychiatric hospital completed the PCL-R and the MMPI-2. Exploratory stepwise regression analyses assessed the prediction of the PCL-R total and its facet scores from MMPI-2-RF scales at its 3 hierarchical levels. Conceptually meaningful results emerged at each level of the MMPI-2-RF hierarchy, including several consistent differences between predictor sets across the facets. Interestingly, ideas of persecution (RC6) was a specific predictor of PCL-R Facet 2, a facet noted for its association with treatment failure. Results are compared and contrasted to the extant body of empirical work to date, and some tentative clinical implications are offered.

The value of the absent bow tie sign in MRI of bucket-handle tears

International Nuclear Information System (INIS)

Watt, Andrew J.B.; Halliday, Tonya; Raby, Nigel

2000-01-01

AIM: To assess the accuracy of the absent bow tie sign in diagnosing bucket handle meniscal tears (BHT) of the knee menisci. MATERIALS AND METHODS: During a 3-year period, we correlated the MRI and arthroscopic findings and the presence of the various signs. One hundred and seven knees were reviewed: 74 where either MRI or arthroscopy had identified a BHT and 33 which were either normal (31), or a simple tear was identified (2). All cases were reviewed by a single radiologist with a musculoskeletal interest blinded to the original results. Each was assessed for the presence of (1) a central meniscal fragment, (2) the double posterior cruciate ligament (PCL) sign, (3) the bow tie sign and (4) the contribution of a 3D-volume sequence. RESULTS: Optimal results were obtained using standard sequences and a 3D-volume sequence, giving a sensitivity of 74% and positive predictive value of 89%. The bow tie sign gave a sensitivity of 71% and positive predictive value of 76%, significantly less than previous reports. The 18 BHTs diagnosed by arthroscopy but missed by MRI showed other abnormal findings at MRI and were not reported as normal. CONCLUSION: We were not able to reproduce the previously reported high sensitivity and specificity of the absent bow tie sign. Despite optimization of all factors, the accurate diagnosis of a bucket handle tear remains difficult, and is most reliably made by identifying a central meniscal fragment, rather than relying on secondary signs such as the absent bow tie sign. Watt, A.J.B. (2000)

Photocatalytic antibacterial effect of ZnO nanoparticles into coaxial electrospun PCL fibers to prevent infections from skin injuries

Science.gov (United States)

Prado-Prone, G.; Silva-Bermúdez, P.; García-Macedo, J. A.; Almaguer-Flores, A.; Ibarra, C.; Velasquillo-Martínez, C.

2017-02-01

Antibacterial studies of inorganic nanoparticles (nps) have become important due to the increased bacterial resistance against antibiotics. We used Zinc oxide nanoparticles (ZnO nps), which possess excellent photocatalytic properties with a wide band gap (Eg), are listed as "generally recognized as safe" by the Food and Drug Administration (FDA) and have shown antibacterial activity (AA) against many bacterial strains. The AA of ZnO nps is partly attributed to the production of Reactive Oxygen Species (ROS) by photocatalysis. When ZnO nps in aqueous media are illuminated with an energy water and Oxygen molecules to generate hydroxyl-radical (OH• ), superoxide-radical (O2 •- ) and hydrogen-peroxide (H2O2). These ROS induce cell membrane damage resulting in cell death. However, the application of inorganic nps in medical treatments is limited due to the possible long-term side effects of nps release. To prevent its release, ZnO nps were dispersed into Polycaprolactone (PCL) fibers obtained by electrospinning technique. To optimize the use of ZnO nps concentration, we developed coreshell coaxial electrospun fibers where the core corresponded to PCL and the shell to a mixture of ZnO nps/PCL. Thus, ZnO nps were only dispersed on the surface of the fibers increasing its superficial contact area. We evaluated the AA against E. coli of different electrospun ZnO nps/PCL fibers under two different conditions: UVA pre-illumination and darkness. Preliminary results suggest that the AA against E. coli is better when electrospun ZnO nps/PCL were preilluminated with UVA than under darkness conditions.

Developing the PTSD Checklist-I/F for the DSM-IV (PCL-I/F: Assessing PTSD Symptom Frequency and Intensity in a Pilot Study of Male Veterans with Combat-Related PTSD

Directory of Open Access Journals (Sweden)

Ryan Holliday

2015-02-01

Full Text Available The widely used posttraumatic stress disorder (PTSD Checklist (PCL has established reliability and validity, but it does not differentiate posttraumatic symptom frequency from intensity as elements of posttraumatic symptom severity. Thus, the PCL in its existing form may not provide a comprehensive appraisal of posttraumatic symptomatology. Because of this, we modified the PCL to create the PCL-I/F that measures both frequency and intensity of PTSD symptoms via brief self-report. To establish validity and internal consistency of the PCL-I/F, we conducted a pilot study comparing PCL-I/F scores to structured diagnostic interview for PTSD (the Clinician Administered PTSD Scale [CAPS] in a male combat veteran sample of 92 participants. Statistically significant correlations between the PCL-I/F and the CAPS were found, suggesting initial validation of the PCL-I/F to screen and assess frequency and intensity of combat-related PTSD symptoms. Implications are discussed for screening and assessment of PTSD related to combat and non-combat trauma.

Factor structure, internal consistency and reliability of the Posttraumatic Stress Disorder Checklist (PCL: an exploratory study Estrutura fatorial, consistência interna e confiabilidade do Posttraumatic Stress Disorder Checklist (PCL: um estudo exploratório

Directory of Open Access Journals (Sweden)

Eduardo de Paula Lima

2012-01-01

Full Text Available INTRODUCTION: Posttraumatic stress disorder (PTSD is an anxiety disorder resulting from exposure to traumatic events. The Posttraumatic Stress Disorder Checklist (PCL is a self-report measure largely used to evaluate the presence of PTSD. OBJECTIVE: To investigate the internal consistency, temporal reliability and factor validity of the Portuguese language version of the PCL used in Brazil. METHODS: A total of 186 participants were recruited. The sample was heterogeneous with regard to occupation, sociodemographic data, mental health history, and exposure to traumatic events. Subjects answered the PCL at two occasions within a 15 days’ interval (range: 5-15 days. RESULTS: Cronbach’s alpha coefficients indicated high internal consistency for the total scale (0.91 and for the theoretical dimensions of the Diagnostic and Statistical Manual of Mental Disorders, 4th edition (DSM-IV (0.83, 0.81, and 0.80. Temporal reliability (test-retest was high and consistent for different cutoffs. Maximum likelihood exploratory factor analysis (EFA was conducted and oblique rotation (Promax was applied. The Kaiser-Meyer-Olkin (KMO index (0.911 and Bartlett’s test of sphericity (χ² = 1,381.34, p INTRODUÇÃO: O transtorno do estresse pós-traumático (TEPT é um transtorno de ansiedade decorrente da exposição a eventos traumáticos. Entre as medidas de avaliação dos sintomas, destaca-se o Posttraumatic Stress Disorder Checklist (PCL. OBJETIVO: Investigar a consistência interna, a confiabilidade temporal e a validade fatorial da versão do PCL em português, utilizada no Brasil. MÉTODOS: Participaram do estudo 186 indivíduos heterogêneos em relação a ocupação, características sociodemográficas, histórico de saúde mental e exposição a eventos traumáticos. O PCL foi aplicado em dois momentos considerando um intervalo máximo de 15 dias (intervalo: 5-15 dias. RESULTADOS: A consistência interna (alfa de Cronbach foi adequada para a escala

PCL-coated hydroxyapatite scaffold derived from cuttlefish bone: In vitro cell culture studies

International Nuclear Information System (INIS)

Milovac, Dajana; Gamboa-Martínez, Tatiana C.; Ivankovic, Marica; Gallego Ferrer, Gloria; Ivankovic, Hrvoje

2014-01-01

In the present study, we examined the potential of using highly porous poly(ε-caprolactone) (PCL)-coated hydroxyapatite (HAp) scaffold derived from cuttlefish bone for bone tissue engineering applications. The cell culture studies were performed in vitro with preosteoblastic MC3T3-E1 cells in static culture conditions. Comparisons were made with uncoated HAp scaffold. The attachment and spreading of preosteoblasts on scaffolds were observed by Live/Dead staining Kit. The cells grown on the HAp/PCL composite scaffold exhibited greater spreading than cells grown on the HAp scaffold. DNA quantification and scanning electron microscopy (SEM) confirmed a good proliferation of cells on the scaffolds. DNA content on the HAp/PCL scaffold was significantly higher compared to porous HAp scaffolds. The amount of collagen synthesis was determined using a hydroxyproline assay. The osteoblastic differentiation of the cells was evaluated by determining alkaline phosphatase (ALP) activity and collagen type I secretion. Furthermore, cell spreading and cell proliferation within scaffolds were observed using a fluorescence microscope. - Highlights: • Hydroxyapatite/poly(ε-caprolactone) scaffold with interconnected pores was prepared • Cytotoxicity test showed that the scaffold was not cytotoxic towards MC3T3-E1 cells • The scaffold supported the attachment, proliferation and differentiation of cells • A 3D cell colonization was confirmed using the fluorescence microscopy • The scaffold might be a promising candidate for bone tissue engineering

Effects of pre- and post-electrospinning plasma treatments on electrospun PCL nanofibers to improve cell interactions

International Nuclear Information System (INIS)

Asadian, M; Grande, S; Morent, R; Nikiforov, A; De Geyter, N; Declercq, H

2017-01-01

In this study, liquid plasma treatment was used to improve the morphology of Poly-ε-CaproLactone (PCL) NanoFibers (NFs), followed by performing a Dielectric Barrier Discharge (DBD) plasma surface modification to enhance the hydrophilicity of electrospun mats generated from plasma-modified PCL solutions. Cell interaction studies performed after 1 day and 7 days clearly revealed the highly increased cellular interactions on the double plasma-treated nanofibers compared to the pristine ones due to the combination of (1) a better NF morphology and (2) an increased surface hydrophilicity. (paper)

The effect of urea and urea-modified halloysite on performance of PCL

Czech Academy of Sciences Publication Activity Database

Khunová, V.; Kelnar, Ivan; Kristóf, J.; Dybal, Jiří; Kratochvíl, Jaroslav; Kaprálková, Ludmila

2015-01-01

Roč. 120, č. 2 (2015), s. 1283-1291 ISSN 1388-6150 R&D Projects: GA ČR(CZ) GA13-15255S Institutional support: RVO:61389013 Keywords : PCL * urea * halloysite Subject RIV: JI - Composite Materials Impact factor: 1.781, year: 2015

Effect of platy and tubular nanoclays on behaviour of biodegradable PCL/PLA blend and related microfibrillar composites

Science.gov (United States)

Kelnar, Ivan; Kratochvíl, Jaroslav

2016-05-01

Blending of ductile poly(ɛ-caprolactone) (PCL) and rigid polylactic acid (PLA) is a promising way to tailor biodegradable materials with broad range of properties. But the mutual incompatibility of both polyesters leads to compromised behaviour only. Alternative to PCL/PLA blends is application of PLA in the form of short fibres, however, difficult dispergation of flexible fibres including their poor adhesion and limited processing is a significant restriction. More effective is in situ formation of polymeric fibre-reinforced materials using microfibrillar composites (MFC) concept based on melt- or cold-drawing of a polymer blend. Important advantage of MFC is efficient dispersion and bonding of in-situ formed reinforcing fibres This work deals with combination of structure-directing and reinforcing effects of montmorillonite (oMMT) and halloysite nanotubes (HNT) in the PCL/PLA 80/20 blend with in-situ formation of PLA fibrils in the PCL matrix. In the resulting microfibrillar composite, reinforcement by rigid PLA fibrils is combined with strengthening of both components by the nanofiller (NF). Moreover, PLA fibrils formation via melt-drawing is only possible after nanofiller addition due to favourable affecting of rheological parameters of the polymer components. The structure-properties relationship and complex effect of NF on microfibrillar composite performance, causing e.g., quite comparable parameters of both microfibrillar composites in spite of lower reinforcing effect of halloysite nanotubes on components, are discussed.

Cross-cultural and factorial validity of PTSD check list-military version (PCL-M) in Sinhalese language.

Science.gov (United States)

Semage, Saveen N; Sivayogan, Sivagurunadan; Forbes, David; O'Donnell, Meaghan; Monaragala, Roshan M M; Lockwood, Emma; Dunt, David

2013-01-01

There are currently no validated instruments to assess the burden of combat-related Posttraumatic Stress Disorder (PTSD) in Sinhalese-the main spoken language in Sri Lanka. The purpose of this research was to establish the cross-cultural and structural validity of the PTSD Check List-Military Version (PCL-M) translated into Sinhalese. Expert committee consensus generation as well as translation-back translation approaches were used to establish the semantic, conceptual, and content equivalence of the Sinhalese and English versions of the PCL-M. Four translations of each item were made. In the absence of any "gold standard" psychometric instrument in Sinhalese to establish the criterion validity for the PCL-M (SIN), the study utilized more informal checks for assessment of validity and Sri Lankan cutoffs for caseness for PTSD to establish the psychometric strength of the translated instrument along with standard reliability analysis. Confirmatory factor analysis was performed on PCL-M scoring of a random sample of 1,586 soldiers to examine construct validity. Thirteen of the 17 items were selected by popular vote, and the remaining 4 through discussion and consensus. Reliability measured by Cronbach's-α was 0.944 for the total scale and 0.812, 0.869, and 0.895 for the three DSM-IV sub-scales (re-experiencing, avoidance/numbing, and hyperarousal), respectively. The desired cutoff point for the translated instrument was determined to be 44. The five-factor model by Elhai et al. and the four-factor model by King et al. fitted best, demonstrating good fit to all three fit indices, while the four-factor model and the DSM-IV three-factor model by Simms et al. only had acceptable levels of fit for root mean squared error of approximation. χ(2) difference test comparing the two better-fitting models suggests that the five-factor model by Elhai et al. has the better fit. The PCL-M (SIN) version is suitable for use in the study of PTSD in the Sri Lankan military forces, as

PCL tibial avulsion with an associated medial meniscal tear in a child: a case report on diagnosis and management.

LENUS (Irish Health Repository)

2012-02-01

Posterior cruciate ligament (PCL) injuries from tibial avulsions are rare in the paediatric setting. One would need a high index of suspicion as clinical examination may be difficult, especially in the early period. Magnetic resonance imaging is an excellent diagnostic modality for this condition and other associated injuries within the knee. We report a rare case in which the patient had a PCL avulsion off the tibial insertion site with an associated posterior horn medial meniscal tear off the posterior capsule. He was treated through open reduction and internal fixation of the avulsed fragment with suture repair of the meniscal tear. We emphasize the importance of diagnosing and managing associated intra-articular injuries when dealing with the rare condition of PCL tibial avulsion in the paediatric setting.

Effect of Zebularine loaded MePEG-PCL nanoparticles on viability, attachment of in vitro cultured lens epithelial cells

Directory of Open Access Journals (Sweden)

Si-Wei Liu

2015-01-01

Full Text Available AIM: To investigate the effect of zebularine(Zebloaded Poly(ethylene glycol-block-poly(ε-caprolactonemethyl ether(MePEG-PCLnanoparticles(NPson the viability, attachment, and apoptosis of in vitro cultured lens epithelial cells(LECs. METHODS: In vitro cultured infant human lens tissue HLE B-3 immortalized cells were distributed randomly divided into six groups. Each group was administered with free Zeb 50μmol/L(ZebF1 group, 100μmol/L(ZebF2 group, Zeb -loaded MePEG-PCL NPs 50μmol/L(ZebNP1 group, Zeb -loaded MePEG-PCL NPs 100μmol/L(ZebNP2 group, MePEG-PCL empty NPs(NPs groupor blank medium(group Crespectively. A tetrazolium dye assay(MTTtest and modified MTT test were performed to determine cell viability and cell attachment. DNA ladder was used to detect the cell apoptosis. RESULTS: Determined by MTT colorimetric method: Cell proliferation rate of LECs were suppressed by all Zeb administration groups in a concentration-time dependent manner(PPP ZebNP1>ZebF2(PCONCLUSION: Zeb loaded MePEG-PCL NPs had better effect on suppressing the viability and attachment of in vitro cultured LECs than the free Zeb groups, as well as enhancing the apoptosis.

Polydopamine-Functionalized CA-(PCL-ran-PLA) Nanoparticles for Target Delivery of Docetaxel and Chemo-photothermal Therapy of Breast Cancer

Science.gov (United States)

Kong, Na; Deng, Mei; Sun, Xiu-Na; Chen, Yi-Ding; Sui, Xin-Bing

2018-01-01

Current limitations of cancer therapy include the lack of effective strategy for target delivery of chemotherapeutic drugs, and the difficulty of achieving significant efficacy by single treatment. Herein, we reported a synergistic chemo-photothermal strategy based on aptamer (Apt)-polydopamine (pD) functionalized CA-(PCL-ran-PLA) nanoparticles (NPs) for effective delivery of docetaxel (DTX) and enhanced therapeutic effect. The developed DTX-loaded Apt-pD-CA-(PCL-ran-PLA) NPs achieved promising advantages, such as (i) improved drug loading content (LC) and encapsulation efficiency (EE) initiated by star-shaped copolymer CA-(PCL-ran-PLA); (ii) effective target delivery of drugs to tumor sites by incorporating AS1411 aptamers; (iii) significant therapeutic efficacy caused by synergistic chemo-photothermal treatment. In addition, the pD coating strategy with simple procedures could address the contradiction between targeting modification and maintaining formerly excellent bio-properties. Therefore, with excellent bio-properties and simple preparation procedures, the DTX-loaded Apt-pD-CA-(PCL-ran-PLA) NPs effectively increased the local drug concentration in tumor sites, minimized side effects, and significantly eliminated tumors, indicating the promising application of these NPs for cancer therapy. PMID:29527167

Development of a PCL-silica nanoparticles composite membrane for Guided Bone Regeneration

NARCIS (Netherlands)

Castro, A.; Diba, M.; Kersten, M.; Jansen, J.A.; Beucken, J.J.J.P van den; Yang, F.

2018-01-01

The pivotal step in Guided Bone Regeneration (GBR) therapy is the insertion of a membrane for support and barrier functions. Here, we studied the effect of the addition of silica nanoparticles (Si-NPs) in electrospun poly(epsilon-caprolactone) (PCL) membranes to improve the mechanical and

Comparative Efficacies of Collagen-Based 3D Printed PCL/PLGA/?-TCP Composite Block Bone Grafts and Biphasic Calcium Phosphate Bone Substitute for Bone Regeneration

OpenAIRE

Hwang, Kyoung-Sub; Choi, Jae-Won; Kim, Jae-Hun; Chung, Ho Yun; Jin, Songwan; Shim, Jin-Hyung; Yun, Won-Soo; Jeong, Chang-Mo; Huh, Jung-Bo

2017-01-01

The purpose of this study was to compare bone regeneration and space maintaining ability of three-dimensional (3D) printed bone grafts with conventional biphasic calcium phosphate (BCP). After mixing polycaprolactone (PCL), poly (lactic-co-glycolic acid) (PLGA), and ?-tricalcium phosphate (?-TCP) in a 4:4:2 ratio, PCL/PLGA/?-TCP particulate bone grafts were fabricated using 3D printing technology. Fabricated particulate bone grafts were mixed with atelocollagen to produce collagen-based PCL/P...

In Vitro Evaluation of PCL and P(3HB) as Coating Materials for Selective Laser Melted Porous Titanium Implants.

Science.gov (United States)

Grau, Michael; Matena, Julia; Teske, Michael; Petersen, Svea; Aliuos, Pooyan; Roland, Laura; Grabow, Niels; Murua Escobar, Hugo; Gellrich, Nils-Claudius; Haferkamp, Heinz; Nolte, Ingo

2017-11-23

Titanium is widely used as a bone implant material due to its biocompatibility and high resilience. Since its Young's modulus differs from bone tissue, the resulting "stress shielding" could lead to scaffold loosening. However, by using a scaffold-shaped geometry, the Young's modulus can be adjusted. Also, a porous geometry enables vascularisation and bone ingrowth inside the implant itself. Additionally, growth factors can improve these effects. In order to create a deposit and release system for these factors, the titanium scaffolds could be coated with degradable polymers. Therefore, in the present study, synthetic poly-ε-caprolactone (PCL) and the biopolymer poly(3-hydroxybutyrate) (P(3HB)) were tested for coating efficiency, cell adhesion, and biocompatibility to find a suitable coating material. The underlying scaffold was created from titanium by Selective Laser Melting (SLM) and coated with PCL or P(3HB) via dip coating. To test the biocompatibility, Live Cell Imaging (LCI) as well as vitality and proliferation assays were performed. In addition, cell adhesion forces were detected via Single Cell Force Spectroscopy, while the coating efficiency was observed using environmental scanning electron microscopy (ESEM) and energy-dispersive X-ray (EDX) analyses. Regarding the coating efficiency, PCL showed higher values in comparison to P(3HB). Vitality assays revealed decent vitality values for both polymers, while values for PCL were significantly lower than those for blank titanium. No significant differences could be observed between PCL and P(3HB) in proliferation and cell adhesion studies. Although LCI observations revealed decreasing values in cell number and populated area over time on both polymer-coated scaffolds, these outcomes could be explained by the possibility of coating diluent residues accumulating in the culture medium. Overall, both polymers fulfill the requirements regarding biocompatibility. Nonetheless, since only PCL coating ensured the

In Vitro Evaluation of PCL and P(3HB as Coating Materials for Selective Laser Melted Porous Titanium Implants

Directory of Open Access Journals (Sweden)

Michael Grau

2017-11-01

Full Text Available Titanium is widely used as a bone implant material due to its biocompatibility and high resilience. Since its Young’s modulus differs from bone tissue, the resulting “stress shielding” could lead to scaffold loosening. However, by using a scaffold-shaped geometry, the Young’s modulus can be adjusted. Also, a porous geometry enables vascularisation and bone ingrowth inside the implant itself. Additionally, growth factors can improve these effects. In order to create a deposit and release system for these factors, the titanium scaffolds could be coated with degradable polymers. Therefore, in the present study, synthetic poly-ε-caprolactone (PCL and the biopolymer poly(3-hydroxybutyrate (P(3HB were tested for coating efficiency, cell adhesion, and biocompatibility to find a suitable coating material. The underlying scaffold was created from titanium by Selective Laser Melting (SLM and coated with PCL or P(3HB via dip coating. To test the biocompatibility, Live Cell Imaging (LCI as well as vitality and proliferation assays were performed. In addition, cell adhesion forces were detected via Single Cell Force Spectroscopy, while the coating efficiency was observed using environmental scanning electron microscopy (ESEM and energy-dispersive X-ray (EDX analyses. Regarding the coating efficiency, PCL showed higher values in comparison to P(3HB. Vitality assays revealed decent vitality values for both polymers, while values for PCL were significantly lower than those for blank titanium. No significant differences could be observed between PCL and P(3HB in proliferation and cell adhesion studies. Although LCI observations revealed decreasing values in cell number and populated area over time on both polymer-coated scaffolds, these outcomes could be explained by the possibility of coating diluent residues accumulating in the culture medium. Overall, both polymers fulfill the requirements regarding biocompatibility. Nonetheless, since only PCL

Psychometric properties of the PTSD Checklist for Diagnostic and Statistical Manual of Mental Disorders-Fifth Edition (PCL-5) in veterans.

Science.gov (United States)

Bovin, Michelle J; Marx, Brian P; Weathers, Frank W; Gallagher, Matthew W; Rodriguez, Paola; Schnurr, Paula P; Keane, Terence M

2016-11-01

This study examined the psychometric properties of the posttraumatic stress disorder (PTSD) Checklist for Diagnostic and Statistical Manual of Mental Disorders-Fifth Edition (PCL-5; Weathers, Litz, et al., 2013b) in 2 independent samples of veterans receiving care at a Veterans Affairs Medical Center (N = 468). A subsample of these participants (n = 140) was used to define a valid diagnostic cutoff score for the instrument using the Clinician-Administered PTSD Scale for DSM-5 (CAPS-5; Weathers, Blake, et al., 2013) as the reference standard. The PCL-5 test scores demonstrated good internal consistency (α = .96), test-retest reliability (r = .84), and convergent and discriminant validity. Consistent with previous studies (Armour et al., 2015; Liu et al., 2014), confirmatory factor analysis revealed that the data were best explained by a 6-factor anhedonia model and a 7-factor hybrid model. Signal detection analyses using the CAPS-5 revealed that PCL-5 scores of 31 to 33 were optimally efficient for diagnosing PTSD (κ(.5) = .58). Overall, the findings suggest that the PCL-5 is a psychometrically sound instrument that can be used effectively with veterans. Further, by determining a valid cutoff score using the CAPS-5, the PCL-5 can now be used to identify veterans with probable PTSD. However, findings also suggest the need for research to evaluate cluster structure of DSM-5. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

Planetary Vital Signs

Science.gov (United States)

Kennel, Charles; Briggs, Stephen; Victor, David

2016-07-01

The climate is beginning to behave in unusual ways. The global temperature reached unprecedented highs in 2015 and 2016, which led climatologists to predict an enormous El Nino that would cure California's record drought. It did not happen the way they expected. That tells us just how unreliable temperature has become as an indicator of important aspects of climate change. The world needs to go beyond global temperature to a set of planetary vital signs. Politicians should not over focus policy on one indicator. They need to look at the balance of evidence. A coalition of scientists and policy makers should start to develop vital signs at once, since they should be ready at the entry into force of the Paris Agreement in 2020. But vital signs are only the beginning. The world needs to learn how to use the vast knowledge we will be acquiring about climate change and its impacts. Is it not time to use all the tools at hand- observations from space and ground networks; demographic, economic and societal measures; big data statistical techniques; and numerical models-to inform politicians, managers, and the public of the evolving risks of climate change at global, regional, and local scales? Should we not think in advance of an always-on social and information network that provides decision-ready knowledge to those who hold the responsibility to act, wherever they are, at times of their choosing?

Development and characterization of biodegradable polymer blends - PHBV/PCL irradiated with gamma rays

International Nuclear Information System (INIS)

Rosario, F.; Casarin, S.A.; Agnelli, J.A.M.; Souza Junior, O.F. de

2010-01-01

This paper presents the results of a study that aimed to develop PHBV biodegradable polymer blends, in a major concentration with PCL, irradiate the pure polymers and blends in two doses of gamma radiation and to analyze the changes in chemical and mechanical properties. The blends used in this study were from natural biodegradable copolymer poly (hydroxybutyrate-valerate) (PHBV) and synthetic biodegradable polymer poly (caprolactone) (PCL 2201) with low molar mass (2,000 g/mol). Several samples were prepared in a co-rotating twin-screw extruder and afterwards, the tensile specimens were injected for the irradiation treatment with 50 kGy to 100 kGy doses and for the mechanical tests. The characterization of the samples before and after the irradiation treatments was performed through scanning electron microscopy (SEM), dynamic mechanical thermal analysis (DMTA), differential scanning calorimetry (DSC) and mechanical tensile tests. (author)

Reversible TAD Chemistry as a Convenient Tool for the Design of (Re)processable PCL-Based Shape-Memory Materials.

Science.gov (United States)

Defize, Thomas; Riva, Raphaël; Thomassin, Jean-Michel; Alexandre, Michaël; Herck, Niels Van; Prez, Filip Du; Jérôme, Christine

2017-01-01

A chemically cross-linked but remarkably (re)processable shape-memory polymer (SMP) is designed by cross-linking poly(ε-caprolactone) (PCL) stars via the efficient triazolinedione click chemistry, based on the very fast and reversible Alder-ene reaction of 1,2,4-triazoline-3,5-dione (TAD) with indole compounds. Typically, a six-arm star-shaped PCL functionalized by indole moieties at the chain ends is melt-blended with a bisfunctional TAD, directly resulting in a cross-linked PCL-based SMP without the need of post-curing treatment. As demonstrated by the stress relaxation measurement, the labile character of the TAD-indole adducts under stress allows for the solid-state plasticity reprocessing of the permanent shape at will by compression molding of the raw cross-linked material, while keeping excellent shape-memory properties. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Sinus cut-off sign: A helpful sign in the CT diagnosis of diaphragmatic rupture associated with pleural effusion

International Nuclear Information System (INIS)

Kaya, Seyda Ors; Karabulut, Nevzat; Yuncu, Gokhan; Sevinc, Serpil; Kiroglu, Yilmaz

2006-01-01

The objective of our study was to describe the 'sinus cut-off' sign at CT in the diagnosis of diaphragmatic rupture in patients with blunt abdominal trauma complicated with pleural effusion, and evaluate its utility in an experimental model. Between January 2004 and March 2005, we observed an unusual interruption of costophrenic sinus at CT in three patients with blunt abdominal trauma accompanied with pleural effusion. This observation prompted us to evaluate the utility of this sign in an experimental model. Laparotomically, we created 2 cm diapragmatic lacerations at each hemidiaphragm in two rabbits and pushed up the abdominal viscera with omentum through the defect. To simulate hemothorax, we also injected 5-10 mL of diluted contrast material into the pleural space. Using a dual-slice helical CT scanner, limited thoracoabdominal CT examination was performed before and after injection of intrapleural contrast material. The images were analyzed for the presence of CT signs for diaphragmatic injury. The left posterior costophrenic sulcus was interrupted in all of the three patients with left pleural effusion. While it was associated with other findings of diaphragmatic injury, the 'sinus cut-off sign' was the sole finding in one patient. The sinus cut-off sign was observed on the CT scans of 100% of the rabbits with a left and right sided diaphragmatic rupture. The 'sinus cut-off sign' is useful and can increase the CT detection of acute diaphragmatic injury associated with pleural effusion

Construction of non-viral vector (mPEG5k-PCL1.2k)1.4-g-PEI10k and its gene delivery efficacy in vitro

OpenAIRE

Wei HUANG; Ming LV; Zhong-gao GAO; Ming-ji JIN; Fei-fei YANG; Yu-li WANG

2011-01-01

Objective To construct(mPEG5k-PCL1.2k)1.4-g-PEI10k,a copolymer designed as delivery vector for non-viral gene therapy,and explore its cytotoxicity and efficacy in delivery of plasmid DNA(pDNA).Methods The copolymer,mPEG5k-PCL1.2k-OH,was prepared by ring-opening polymerization and then followed by a conversion of hydroxyl terminal(-OH) into N-hydroxysuccinimide(NHS) to prepare mPEG5k-PCL1.2k-NHS.One of the branches,PEI10k,was then reacted with mPEG5k-PCL1.2k-NHS to synthesize a ternary copolym...

Evaluation of 3D printed PCL/PLGA/β-TCP versus collagen membranes for guided bone regeneration in a beagle implant model.

Science.gov (United States)

Won, J-Y; Park, C-Y; Bae, J-H; Ahn, G; Kim, C; Lim, D-H; Cho, D-W; Yun, W-S; Shim, J-H; Huh, J-B

2016-10-07

Here, we compared 3D-printed polycaprolactone/poly(lactic-co-glycolic acid)/β-tricalcium phosphate (PCL/PLGA/β-TCP) membranes with the widely used collagen membranes for guided bone regeneration (GBR) in beagle implant models. For mechanical property comparison in dry and wet conditions and cytocompatibility determination, we analyzed the rate and pattern of cell proliferation of seeded fibroblasts and preosteoblasts using the cell counting kit-8 assay and scanning electron microscopy. Osteogenic differentiation was verified using alizarin red S staining. At 8 weeks following implantation in vivo using beagle dogs, computed tomography and histological analyses were performed after sacrifice. Cell proliferation rates in vitro indicated that early cell attachment was higher in collagen than in PCL/PLGA/β-TCP membranes; however, the difference subsided by day 7. Similar outcomes were found for osteogenic differentiation, with approximately 2.5 times greater staining in collagen than PCL/PLGA/β-TCP, but without significant difference by day 14. In vivo, bone regeneration in the defect area, represented by new bone formation and bone-to-implant contact, paralleled those associated with collagen membranes. However, tensile testing revealed that whereas the PCL/PLGA/β-TCP membrane mechanical properties were conserved in both wet and dry states, the tensile property of collagen was reduced by 99% under wet conditions. Our results demonstrate in vitro and in vivo that PCL/PLGA/β-TCP membranes have similar levels of biocompatibility and bone regeneration as collagen membranes. In particular, considering that GBR is always applied to a wet environment (e.g. blood, saliva), we demonstrated that PCL/PLGA/β-TCP membranes maintained their form more reliably than collagen membranes in a wet setting, confirming their appropriateness as a GBR membrane.

On/Off Power Supply of the Electron Beam Machine HV Automation by Using PCL-718 and PCLD-786

International Nuclear Information System (INIS)

Sudiyanto; Suyono, Djoko; Salam, Aminus; Ngatinu; Sudaryanto; Wiyana, Badi

1996-01-01

HV on/off power supply of the electron beam machine HV automation by using PCL-718 and PCLD-786 have been done. During the simulation experiments by using PCL-718 ADC-12 bit and PCLD-786 driver relay and Turbo-C software have been multiplexes 16 differential digital output channels which controlled on/off ac/dc relay of the electron beam machine power supply. Two PCLD-786 can be cascaded to expand the digital output channels which controlled 32 ac/dc relay

Graphene-containing PCL- coated Porous 13-93B3 Bioactive Glass Scaffolds for Bone Regeneration

Science.gov (United States)

Türk, Mert; Deliormanlı, Aylin M.

2018-04-01

Borate-based 13-93B3 bioactive glass scaffolds were coated with the graphene-containing poly-caprolactone (PCL) solution to prepare electrically conductive composites for biomedical applications. Results revealed that electrical conductivity of the scaffolds increased with increasing concentration of graphene nanoparticles. Significant difference was not observed in hydroxyapatite forming ability of the bare and the graphene-containing scaffolds immersed in simulated body fluid. In vitro cytotoxicity experiments (XTT tests) showed that pre-osteoblastic MC3T3-E1 cell viability percentages of the graphene- containing samples was higher than control group samples after 7 days of incubation. However, a decrease in cell viability rates was obtained after 14 days of incubation for samples coated with PCL containing graphene starting from 3 wt%. Additionally, results obtained in the live-dead assay were consistent with the results of XTT tests. A higher ALP activity was detected in cells cultured on the graphene-containing borate glass scaffolds than those on the bare PCL coated 13-93B3 scaffolds suggesting the presence of graphene nanopowders stimulated an early stage of osteoblastic differentiation. SEM analysis showed that MC3T3-E1 cells exhibited a flat appearance and spread out through the surface in all groups of scaffolds starting from 3 days of incubation.

Ultraporous interweaving electrospun microfibers from PCL-PEO binary blends and their cellular response

DEFF Research Database (Denmark)

Chen, Menglin; Li, Yanfang; Besenbacher, Flemming

2015-01-01

from a blend of polycaprolactone (PCL) and polyethylene oxide (PEO) in a DCM-DMF mixed solution when the ratio between each component reached a threshold and when the electrospinning parameters were delicately controlled. We further investigated their influence on cell infiltration and colonization...

In vitro and in vivo evaluation of electrospun nanofibers of PCL, chitosan and gelatin: A comparative study

International Nuclear Information System (INIS)

Gomes, S.R.; Rodrigues, G.; Martins, G.G.; Roberto, M.A.; Mafra, M.; Henriques, C.M.R.

2015-01-01

Many polymers have been investigated with respect to their use in skin tissue engineering. However, directly comparable data on the role played by different polymers in assisting skin wound healing requires their in vitro and in vivo evaluation under the same conditions. Therefore, we performed a study in order to compare the performance of electrospun nanofiber mats from three different polymers concerning cell–scaffold interaction and wound healing promotion. A polyester (polycaprolactone, PCL), a protein (gelatin from cold water fish skin, GEL) and a polysaccharide (chitosan, CS) were the polymers chosen. Gelatin nanofibers were crosslinked with glutaraldehyde vapor. The scaffolds were characterized physico-chemically, in vitro by seeding with human fetal fibroblasts, HFFF2, and used in vivo as skin substitutes in a rat wound model with total skin removal. In vitro tests revealed that cells adhered and proliferated in all scaffolds. However, cells deep into the scaffold were only observed in the PCL and CS scaffolds. In in vivo tests CS scaffolds had the highest impact on the healing process by decreasing the extent of wound contraction and enhancing the production of a neodermis and re-epithelialization of the wound. - Highlights: • We produced and compared the properties of electrospun PCL, CS and fish GEL. • In vitro, cells adhered and proliferated better on GEL scaffolds. • Deep cell migration was observed in the PCL and CS matrices. • In vivo, both CS and GEL matrices integrated well within the wounds. • Only CS effectively blocked, although only partially, the contraction phenomenon

In vitro and in vivo evaluation of electrospun nanofibers of PCL, chitosan and gelatin: A comparative study

Energy Technology Data Exchange (ETDEWEB)

Gomes, S.R., E-mail: srrg@campus.fct.unl.pt [Centro de Física e Investigação Tecnológica/Departamento de Física Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa, 2829-516 Caparica (Portugal); Rodrigues, G. [Centro de Biologia Ambiental/Departamento de Biologia Animal Faculdade de Ciências da Universidade de Lisboa, Campo Grande, 1749-016 Lisboa (Portugal); Martins, G.G. [Centro de Biologia Ambiental/Departamento de Biologia Animal Faculdade de Ciências da Universidade de Lisboa, Campo Grande, 1749-016 Lisboa (Portugal); Instituto Gulbenkian de Ciência, R. da Quinta Grande, 6, 2780-156 Oeiras (Portugal); Roberto, M.A. [Departamento de Cirurgia Plástica e Reconstrutiva e Unidade de Queimados, Hospital de São José, Rua José António Serrano, 1150-199 Lisboa (Portugal); Mafra, M. [Serviço de Anatomia Patológica, Hospital de São José, Rua José António Serrano, 1150-199 Lisboa (Portugal); Henriques, C.M.R. [Centro de Física e Investigação Tecnológica/Departamento de Física Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa, 2829-516 Caparica (Portugal); and others

2015-01-01

Many polymers have been investigated with respect to their use in skin tissue engineering. However, directly comparable data on the role played by different polymers in assisting skin wound healing requires their in vitro and in vivo evaluation under the same conditions. Therefore, we performed a study in order to compare the performance of electrospun nanofiber mats from three different polymers concerning cell–scaffold interaction and wound healing promotion. A polyester (polycaprolactone, PCL), a protein (gelatin from cold water fish skin, GEL) and a polysaccharide (chitosan, CS) were the polymers chosen. Gelatin nanofibers were crosslinked with glutaraldehyde vapor. The scaffolds were characterized physico-chemically, in vitro by seeding with human fetal fibroblasts, HFFF2, and used in vivo as skin substitutes in a rat wound model with total skin removal. In vitro tests revealed that cells adhered and proliferated in all scaffolds. However, cells deep into the scaffold were only observed in the PCL and CS scaffolds. In in vivo tests CS scaffolds had the highest impact on the healing process by decreasing the extent of wound contraction and enhancing the production of a neodermis and re-epithelialization of the wound. - Highlights: • We produced and compared the properties of electrospun PCL, CS and fish GEL. • In vitro, cells adhered and proliferated better on GEL scaffolds. • Deep cell migration was observed in the PCL and CS matrices. • In vivo, both CS and GEL matrices integrated well within the wounds. • Only CS effectively blocked, although only partially, the contraction phenomenon.

Unusual lightning electric field waveforms observed in Kathmandu, Nepal, and Uppsala, Sweden

Science.gov (United States)

Adhikari, Pitri Bhakta; Sharma, Shriram; Baral, Kedarnath; Rakov, Vladimir A.

2017-11-01

Unusual lightning events have been observed in Uppsala, Sweden, and Kathmandu, Nepal, using essentially the same electric field measuring system developed at Uppsala University. They occurred in the storms that also generated ;normal; lightning events. The unusual events recorded in Uppsala occurred on one thunderstorm day. Similar events were observed in Kathmandu on multiple thunderstorm days. The unusual events were analyzed in this study assuming them to be positive ground flashes (+CGs), although we cannot rule out the possibility that some or most of them were actually cloud discharges (ICs). The unusual events were each characterized by a relatively slow, negative (atmospheric electricity sign convention) electric field waveform preceded by a pronounced opposite-polarity pulse whose duration was some tens of microseconds. To the best of our knowledge, such unusual events have not been reported in the literature. The average amplitudes of the opposite-polarity pulses with respect to those of the following main waveform were found to be about 33% in Uppsala (N = 31) and about 38% in Kathmandu (N = 327). The average durations of the main waveform and the preceding opposite-polarity pulse in Uppsala were 8.24 ms and 57.1 μs, respectively, and their counterparts in Kathmandu were 421 μs and 39.7 μs. Electric field waveforms characteristic of negative ground flashes (-CGs) were also observed, and none of them exhibited an opposite-polarity pulse prior to the main waveform. Possible origins of the unusual field waveforms are discussed.

Comparison of Selective Laser Melted Titanium and Magnesium Implants Coated with PCL

Science.gov (United States)

Matena, Julia; Petersen, Svea; Gieseke, Matthias; Teske, Michael; Beyerbach, Martin; Kampmann, Andreas; Escobar, Hugo Murua; Gellrich, Nils-Claudius; Haferkamp, Heinz; Nolte, Ingo

2015-01-01

Degradable implant material for bone remodeling that corresponds to the physiological stability of bone has still not been developed. Promising degradable materials with good mechanical properties are magnesium and magnesium alloys. However, excessive gas production due to corrosion can lower the biocompatibility. In the present study we used the polymer coating polycaprolactone (PCL), intended to lower the corrosion rate of magnesium. Additionally, improvement of implant geometry can increase bone remodeling. Porous structures are known to support vessel ingrowth and thus increase osseointegration. With the selective laser melting (SLM) process, defined open porous structures can be created. Recently, highly reactive magnesium has also been processed by SLM. We performed studies with a flat magnesium layer and with porous magnesium implants coated with polymers. The SLM produced magnesium was compared with the titanium alloy TiAl6V4, as titanium is already established for the SLM-process. For testing the biocompatibility, we used primary murine osteoblasts. Results showed a reduced corrosion rate and good biocompatibility of the SLM produced magnesium with PCL coating. PMID:26068455

Reduction of Electromagnetic Interference Using ZnO-PCL Nanocomposites at Microwave Frequency

Directory of Open Access Journals (Sweden)

Abubakar Yakubu

2015-01-01

Full Text Available In industrial equipment and home appliance applications, the electromagnetic compatibility compliance directive (ECCD demands that electromagnetic interference side effects be eliminated or marginally minimized. The equipment must not disturb radio and telecommunication as well as other appliances. Additionally the ECCD also governs the immunity of such equipment to interference and seeks to ensure that this equipment is not disturbed by radio emissions when used as intended. Many types of absorbing materials are commercially available. However, many are expensive and not environmentally friendly. It is in the light of the above that we studied the electromagnetic absorption properties of ZnO-PCL nanocomposites prepared from cheap and abundant resources which are environmentally friendly (zinc and polycaprolactone. The test was carried out using a microstrip, open ended coaxial probe, and vector network analyzer. Amongst other findings, result showed that the ZnO-PCL nanocomposite has the capability of attenuating microwave frequency up to −18.2 dB due to their very high specific surface areas attributed to the nanofillers at 12 GHz.

Silver nanoparticles immobilized onto polycaprolactone (PCL)/poly[2-(dimethylamino)ethyl metacrilate) nanofiber meshes

International Nuclear Information System (INIS)

Santos, Fernanda G.; Bonkovoski, Leticia C.; Witt, Maria A.; Rubira, Adley F.; Muniz, Edvani C.

2015-01-01

The present work comprises the fabrication of nanofiber meshes of polycaprolactone (PCL)/poly [(2-dimethylamino) ethyl methacrylate] (PDMAEMA) and the subsequent immobilization of silver nanoparticles, in order to obtain materials with potential application in tissue engineering. The nanofibers composed of different ratios of PDMAEMA / PCL (m/m) were obtained by electrospinning. These nanofiber meshes were then immersed in colloidal suspensions containing the AgNPs under different pH values to immobilize the nanoparticles onto the fiber's surface. A greater amount of AgNPs was deposited when the fibers were immersed in a solution of pH 5, as one can observe from the scanning electron microscopy (SEM) images and the X-ray spectroscopy (EDS) spectra. It was observed that the meshes of the blends suffered morphological changes after immersion in acid solution (pH 5), and, the deposition of AgNPs onto the meshes in general was more effective in acid environment (pH 5). (author)

Controlled release of metronidazole from composite poly-ε-caprolactone/alginate (PCL/alginate) rings for dental implants.

Science.gov (United States)

Lan, Shih-Feng; Kehinde, Timilehin; Zhang, Xiangming; Khajotia, Sharukh; Schmidtke, David W; Starly, Binil

2013-06-01

Dental implants provide support for dental crowns and bridges by serving as abutments for the replacement of missing teeth. To prevent bacterial accumulation and growth at the site of implantation, solutions such as systemic antibiotics and localized delivery of bactericidal agents are often employed. The objective of this study was to demonstrate a novel method of controlled localized delivery of antibacterial agents to an implant site using a biodegradable custom fabricated ring. The study involved incorporating a model antibacterial agent (metronidazole) into custom designed poly-ε-caprolactone/alginate (PCL/alginate) composite rings to produce the intended controlled release profile. The rings can be designed to fit around the body of any root form dental implants of various diameters, shapes and sizes. In vitro release studies indicate that pure (100%) alginate rings exhibited an expected burst release of metronidazole in the first few hours, whereas Alginate/PCL composite rings produced a medium burst release followed by a sustained release for a period greater than 4 weeks. By varying the PCL/alginate weight ratios, we have shown that we can control the amount of antibacterial agents released to provide the minimal inhibitory concentration (MIC) needed for adequate protection. The fabricated composite rings have achieved a 50% antibacterial agent release profile over the first 48 h and the remaining amount slowly released over the remainder of the study period. The PCL/alginate agent release characteristic fits the Ritger-Peppas model indicating a diffusion-based mechanism during the 30-day study period. The developed system demonstrates a controllable drug release profile and the potential for the ring to inhibit bacterial biofilm growth for the prevention of diseases such as peri-implantitis resulting from bacterial infection at the implant site. Copyright © 2013 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Posterior Cruciate Ligament Injuries Associated With Military Survival Swim Training.

Science.gov (United States)

Crowell, Michael S; Mason, John S; Posner, Matthew A; Haley, Chad A

2017-07-01

Posterior cruciate ligament (PCL) injuries are relatively common injuries associated with athletic activities and high-energy trauma. Posterolateral corner (PLC) injuries frequently accompany injury to the PCL. Diagnosis can be challenging and requires a comprehensive history and physical examination. Patients frequently report vague, nonspecific symptoms and the mechanism of injury is often useful in localizing injured structures. Two of the more common mechanisms for PCL injury include a direct blow to the proximal anterior tibia with the knee flexed, as well as a significant knee hyperextension injury. With a PCL tear, patients rarely describe an audible "pop" that is commonly reported in ACL injuries. On physical exam, a frequent finding in PCL tears is a loss of 10 to 20° of knee flexion. Although the most common clinical tests for PCL tears include the posterior drawer test, the posterior sag sign, and the quadriceps active test, there is a lack of high-quality diagnostic accuracy studies. Two cases of U.S. Military Academy Cadets who sustained PCL injuries while removing combat boots during military survival swim training are presented. The results of the clinical examination are accompanied by magnetic resonance imaging results and intraoperative arthroscopic images to highlight key findings. Both patients were evaluated and diagnosed with PCL injures within 10 days of their injuries. Each reported feeling/hearing a "pop," which is atypical in PCL tears. Both patients demonstrated a lack of active and passive knee flexion, which is a commonly reported impairment. One patient was managed nonsurgically with physical therapy and eventually returned to full duty without limitations 9 months after his injury. The other patient, who sustained a combined PCL-PLC injury, underwent a PCL reconstruction and PLC repair and reconstruction 8 weeks after his injury. He returned all training, with the exception of contact/collision sports, 9 months after surgery. Both

Drug loaded homogeneous electrospun PCL/gelatin hybrid nanofiber structures for anti-infective tissue regeneration membranes.

Science.gov (United States)

Xue, Jiajia; He, Min; Liu, Hao; Niu, Yuzhao; Crawford, Aileen; Coates, Phil D; Chen, Dafu; Shi, Rui; Zhang, Liqun

2014-11-01

Infection is the major reason for guided tissue regeneration/guided bone regeneration (GTR/GBR) membrane failure in clinical application. In this work, we developed GTR/GBR membranes with localized drug delivery function to prevent infection by electrospinning of poly(ε-caprolactone) (PCL) and gelatin blended with metronidazole (MNA). Acetic acid (HAc) was introduced to improve the miscibility of PCL and gelatin to fabricate homogeneous hybrid nanofiber membranes. The effects of the addition of HAc and the MNA content (0, 1, 5, 10, 20, 30, and 40 wt.% of polymer) on the properties of the membranes were investigated. The membranes showed good mechanical properties, appropriate biodegradation rate and barrier function. The controlled and sustained release of MNA from the membranes significantly prevented the colonization of anaerobic bacteria. Cells could adhere to and proliferate on the membranes without cytotoxicity until the MNA content reached 30%. Subcutaneous implantation in rabbits for 8 months demonstrated that MNA-loaded membranes evoked a less severe inflammatory response depending on the dose of MNA than bare membranes. The biodegradation time of the membranes was appropriate for tissue regeneration. These results indicated the potential for using MNA-loaded PCL/gelatin electrospun membranes as anti-infective GTR/GBR membranes to optimize clinical application of GTR/GBR strategies. Copyright © 2014 Elsevier Ltd. All rights reserved.

Comparison of the PTSD Checklist (PCL) Administered via a Mobile Device Relative to a Paper Form.

Science.gov (United States)

Price, Matthew; Kuhn, Eric; Hoffman, Julia E; Ruzek, Josef; Acierno, Ron

2015-10-01

Mobile devices are increasingly used to administer self-report measures of mental health symptoms. There are significant differences, however, in the way that information is presented on mobile devices compared to the traditional paper forms that were used to administer such measures. Such differences may systematically alter responses. The present study evaluated if and how responses differed for a self-report measure, the PTSD Checklist (PCL), administered via mobile device relative to paper and pencil. Participants were 153 trauma-exposed individuals who completed counterbalanced administrations of the PCL on a mobile device and on paper. PCL total scores (d = 0.07) and item responses did not meaningfully or significantly differ across administrations. Power was sufficient to detect a difference in total score between administrations determined by prior work of 3.46 with a d = 0.23. The magnitude of differences between administration formats was unrelated to prior use of mobile devices or participant age. These findings suggest that responses to self-report measures administered via mobile device are equivalent to those obtained via paper and they can be used with experienced as well as naïve users of mobile devices. Copyright © 2015 Wiley Periodicals, Inc., A Wiley Company.

Moisture Absorption Behaviour of Biopolymer Polycapralactone (PCL) / Organo Modified Montmorillonite Clay (OMMT) biocomposite films

Science.gov (United States)

Malik, Neetu; Shrivastava, Sharad; Bandhu Ghosh, Subrata

2018-04-01

Bio composite materials were fabricated using mixing biodegradable polymer polycaptalactone (PCL) and Organo Modified Montmorillonite Clay (OMMT) through solution casting. Various samples of bio composite films were prepared by varying the OMMT wt% composition by 0.1%, 0.5%, 1% and 1.5%. Thereafter, the density and water absorption of the composites were investigated with respect to immersion time in water. The moisture absorption results show that with an increase in weight percentage (from 0.1 to wt 1.5%) of OMMT within the bio polymer films, the absorption value of bio-nanocomposite films reduced rapidly from 34.4% to 22.3%. The density of hybrid composites also increased with increase in weight percentage of OMMT. The swelling characteristic of PCL increased with increasing % of OMMT clay. These results indicate that the optimized composition of constituents in composite membrane could effectively reduce the anhydrous conditions of bio-composite film.

Synthesis and solution properties of PCL-b-PHPMA diblock copolymers containing stable nitroxyl radicals

Czech Academy of Sciences Publication Activity Database

Petrova, Svetlana; Klepac, Damir; Konefal, Rafal; Kereiche, S.; Kováčik, L.; Filippov, Sergey K.

2016-01-01

Roč. 49, č. 15 (2016), s. 5407-5417 ISSN 0024-9297 R&D Projects: GA MŠk(CZ) LH15213 Institutional support: RVO:61389013 Keywords : PCL-b-PHPMA diblock copolymers * TEMPO * EPR spectroscodpy Subject RIV: CD - Macromolecular Chemistry Impact factor: 5.835, year: 2016

Unusual Case of Severe Lactic Acidosis in a Liver Transplant Patient

Directory of Open Access Journals (Sweden)

Shweta Yemul Golhar

2017-01-01

Full Text Available Lactic acidosis is a standard indicator for oxygen debt and some other very significant causes. We describe a case of liver transplant patient presenting with vague abdominal pain and lactic acidosis without any liver dysfunction/failure/ischemia/rejection or sepsis. The imaging studies showed vague bowel edema and normal hepatic perfusion. The patient continued to deteriorate with rising lactic acidosis when a repeat CT abdomen eventually showed signs of lymphomatosis peritonei. Biopsy revealed the unusual diagnosis of posttransplant lymphoproliferative disorder. Immediate discontinuation of immunosuppression and initiation of chemotherapy led to clinical improvement. Our intention of presenting this case is to increase awareness of posttransplant lymphoma and propose lactic acidosis as not only an indicator of liver dysfunction or rejection but also an aid for diagnosis of this unusual but fatal and potentially curable condition.

Antibacterial Activity of Culture Extracts of Penicillium chrysogenum PCL501: Effects of Carbon Sources

Directory of Open Access Journals (Sweden)

Blessing M. Onyegeme-Okerenta

2009-05-01

Full Text Available Penicillium chrysogenum PCL501 produced β-lactam antibiotics when fermented with different agro-wastes: cassava shavings, corncob, sawdust and sugarcane pulp. In vitro antibacterial activity of the culture extracts was tested against four clinical bacterial isolates, namely, Bacillus subtilis, Escherichia coli, Klebsiella pneumoniae and Pseudomonas aeruginosa. All the culture extracts and standard drug (commercial Benzyl Penicillin inhibited the growth B. subtilis and E. coli; the potency varied with carbon source. Antibacterial activity of extracts from cultures containing cassava shavings and sugarcane pulp was comparable with that of the standard drug. The MIC against the susceptible organisms was 0.20mg/ml for the standard drug and ranged from 0.40 to 1.50mg/ml for the culture extracts. Neither the culture extracts nor the standard drug inhibited K. pneumoniae and P. aeruginosa; the bacterial strains produced β-lactamase enzymes. Cassava shavings and sugarcane pulp are indicated as suitable cheap carbon sources for the production of antibiotics by Penicillium chrysogenum PCL501.

Stadis{reg_sign} 450 in Merox-sweetened jet fuels

Energy Technology Data Exchange (ETDEWEB)

Henry, C.P. [DuPont, Deepwater, NJ (United States)

1995-05-01

Stadis{reg_sign} 450 has been used in aviation fuels since 1983, and in many cases is the additive of choice due to conductivity retention of treated fuels during distribution, and other characteristics. In the past several years, manufacture of Shell ASA-3 (the other aviation-approved static dissipator additive) has been discontinued; current stores are being drawn down and for some refiners conversion from ASA-3 to Stadis{reg_sign} 450 is underway. In fuels sweetened by hydrogen-treating, Stadis{reg_sign} 450 performs very well and there are few reported difficulties. Chemically sweetened fuels sometimes contain trace materials not removed by the sweetening process. When treated with Stadis{reg_sign} 450 some of these fuels have exhibited two behaviors which are being addressed: in one case, the formation of a precipitate which disarmed coalescers; in several other cases, reduced conductivity response and loss of conductivity during storage coupled with unusually large effects on the microseparatometer water separation properties. In late 1992, a Coordinating Research Council (CRC) Panel on Coalescer Deactivation was formed to address these problems. The results of DuPont and CRC efforts are discussed, along with actions taken and underway to eliminate these problems.

Immobilization of silk fibroin on the surface of PCL nanofibrous scaffolds for tissue engineering applications

DEFF Research Database (Denmark)

Khosravi, Alireza; Ghasemi-Mobarakeh, Laleh; Mollahosseini, Hossein

2018-01-01

Poly(ɛ‐caprolactone) (PCL) is explored in tissue engineering (TE) applications due to its biocompatibility, processability, and appropriate mechanical properties. However, its hydrophobic nature and lack of functional groups in its structure are major drawbacks of PCL‐based scaffolds limiting...

Sequential crystallization and morphology of triple crystalline biodegradable PEO-b-PCL-b-PLLA triblock terpolymers

KAUST Repository

Palacios, Jordana; Mugica, Agurtzane; Zubitur, Manuela; Iturrospe, Amaia; Arbe, A.; Liu, Guoming; Wang, Dujin; Zhao, Junpeng; Hadjichristidis, Nikolaos; Muller, Alejandro

2016-01-01

The sequential crystallization of poly(ethylene oxide)-b-poly(e-caprolactone)-b-poly(L-lactide) (PEO-b-PCL-b-PLLA) triblock terpolymers, in which the three blocks are able to crystallize separately and sequentially from the melt, is presented. Two

The performance of dental pulp stem cells on nanofibrous PCL/gelatin/nHA scaffolds.

NARCIS (Netherlands)

Yang, X.; Yang, F.; Walboomers, X.F.; Bian, Z.; Fan, M.; Jansen, J.A.

2010-01-01

The aim of current study is to investigate the in vitro and in vivo behavior of dental pulp stem cells (DPSCs) seeded on electrospun poly(epsilon-caprolactone) (PCL)/gelatin scaffolds with or without the addition of nano-hydroxyapatite (nHA). For the in vitro evaluation, DNA content, alkaline

Signed directed social network analysis applied to group conflict

DEFF Research Database (Denmark)

Zheng, Quan; Skillicorn, David; Walther, Olivier

2015-01-01

Real-world social networks contain relationships of multiple different types, but this richness is often ignored in graph-theoretic modelling. We show how two recently developed spectral embedding techniques, for directed graphs (relationships are asymmetric) and for signed graphs (relationships...... are both positive and negative), can be combined. This combination is particularly appropriate for intelligence, terrorism, and law enforcement applications. We illustrate by applying the novel embedding technique to datasets describing conflict in North-West Africa, and show how unusual interactions can...

Experimental research of ZrO{sub 2}/BCP/PCL scaffold with complex pore pattern for bone tissue

Energy Technology Data Exchange (ETDEWEB)

Sa, Min Woo; Shin, Hae Ri; Kim, Jong Young [Dept. of Mechanical Engineering, Andong National University, Andong (Korea, Republic of)

2015-11-15

Recently, synthetic biopolymers and bioceramics such as poly (-caprolactone)(PCL), hydroxyapatite, tricalcium phosphate, biphasic calcium phosphate(BCP), and zirconia have been used as substrates to generate various tissues or organs in tissue engineering. Thus, the purpose of this study was the characterization of ZrO{sub 2}/BCP/PCL(ZBP) scaffold for bone tissue regeneration. Based on the result of single-line test, blended 3D ZBP scaffolds with fully interconnected pores and new complex pore pattern of -type and staggered-type were successfully fabricated using a polymer deposition system. Furthermore, the effect of ZBP scaffold on mechanical property was analyzed. In addition, in vitro cell interaction of ZBP scaffold on MG63 cells was evaluated using a cell counting kit-8(CCK-8) assay.

Surface modification of MPEG-b-PCL-based nanoparticles via oxidative self-polymerization of dopamine for malignant melanoma therapy

Directory of Open Access Journals (Sweden)

Xiong W

2015-04-01

Full Text Available Wei Xiong,1,2 Lixia Peng,1,2 Hongbo Chen,3 Qin Li1,2 1Southern Medical University, Guangzhou, 2Department of Plastic Surgery, General Hospital of Guangzhou Military Command of PLA, Guangzhou, People’s Republic of China; 3Division of Life Sciences and Health, Graduate School at Shenzhen, Tsinghua University, Shenzhen, People’s Republic of China Abstract: To enhance the therapeutic effects of chemotherapy on malignant melanoma, paclitaxel (PTX-loaded methoxy poly(ethylene glycol-b-poly(ε-caprolactone nanoparticles (MPEG-b-PCL NPs that had their surfaces modified with polydopamine (PTX-loaded MPEG-b-PCL NPs@PDA were prepared as drug vehicles. The block copolymer MPEG-b-PCL was synthesized by ring-opening polymerization and characterized by proton nuclear magnetic resonance spectroscopy and gel permeation chromatography. The PTX-loaded NPs were prepared by a modified nanoprecipitation technique. The PTX-loaded NPs and PTX-loaded NPs@PDA were characterized in terms of size and size distribution, zeta potential, surface morphology, drug encapsulation efficiency, and drug release. Confocal laser scanning microscopy showed that coumarin-6-loaded NPs@PDA could be internalized by human melanoma cell line A875 cells. The cellular uptake efficiency of NPs was greatly enhanced after PDA modification. The antitumor efficacy of the PTX-loaded NPs@PDA was investigated in vitro by the 3-(4,5-dimethylthiazol-2-yl-2,5-diphenyltetrazolium bromide (MTT assay and in vivo by a xenograft tumor model. The PTX-loaded NPs@PDA could significantly inhibit tumor growth compared to Taxol® and precursor PTX-loaded NPs. All the results suggested that the PTX-loaded MPEG-b-PCL NPs that had their surfaces modified with PDA are promising nanocarriers for malignant melanoma therapy. Keywords: cancer nanotechnology, drug delivery, surface modification, polydopamine, malignant melanoma

Synthesis and self-assembly behavior of amphiphilic diblock copolymer dextran-block-poly(ε-caprolactone (DEX-b-PCL in aqueous media

Directory of Open Access Journals (Sweden)

2010-10-01

Full Text Available An amphiphilic diblock copolymer, dextran-block-poly(ε-caprolactone (DEX-b-PCL, with a series of welldefined chain lengths of each block was prepared by conjugating a dextran chain with a PCL block via aza-Michael addition reaction under mild conditions. For the dextran block, samples with relatively uniform molecular weight, 3.5 and 6.0 kDa, were used, and the PCL blocks were prepared via ring-opening polymerization at defined ratios of ε-caprolactone to initiator in order to give copolymers with mass fraction of dextran (fDEX ranging from 0.16 to 0.45. When these copolymers were allowed to self-assemble in aqueous solution, the morphology of assembled aggregates varied as a function of fDEX when characterized by transmission electron microscope (TEM, fluorescence microscope (FM and dynamic laser scattering (DLS. As fDEX decreases gradually from 0.45 to 0.16, the morphology of the copolymer assembly changes from spherical micelles to worm-like micelles and eventually to polymersomes, together with an increase in particle sizes.

The use of PLDLA/PCL-T scaffold to repair osteochondral defects in vivo

Directory of Open Access Journals (Sweden)

Andrea Rodrigues Esposito

2012-01-01

Full Text Available The physiological repair of osteochondral lesions requires the development of a scaffold that is compatible with the structure of the damaged tissue, cartilage and bone. The aim of this study was to evaluate the biological performance of a PLDLA/PCL-T (90/10 scaffold for repairing osteochondral defects in rabbits. Polymeric scaffolds containing saccharose (75% w/v were obtained by solvent casting and then implanted in the medial knee condyles of 12 New Zealand rabbits after osteochondral damage with a trephine metallic drill (diameter: 3.3 mm in both medial femoral condyles. Each rabbit received the same treatment, i.e., the polymeric scaffold was implanted on the right side while no material was implanted on the left side (control. Four and 12 weeks later histological examination revealed bone neoformation in the implant group, with the presence of hyaline cartilage and mesenchymal tissue. In contrast, the control group showed bone neoformation with necrosis, exacerbated superficial fibrosis, inflammation and cracks in the neoformed tissue. These findings indicate that the PLDLA/PCL-T scaffold was biocompatible and protected the condyles by stabilizing the lesion and allowing subchondral bone tissue and hyaline cartilage formation.

TiO2/PCL hybrid materials synthesized via sol–gel technique for biomedical applications

International Nuclear Information System (INIS)

Catauro, M.; Bollino, F.; Papale, F.; Marciano, S.; Pacifico, S.

2015-01-01

The aim of the present work has been the synthesis of organic/inorganic hybrid materials based on titanium dioxide and poly(ε-caprolactone) (PCL) to be used in the biomedical field. Several materials have been synthesized using sol–gel methods by adding different amounts of polymer to the inorganic sol. The obtained gels have been characterized using Fourier transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM) and atomic force microscopy (AFM). The FT-IR data allowed us to hypothesize that the structure formed was that of an interpenetrating network, realized by hydrogen bonds between Ti-OH groups in the sol–gel intermediate species and carbonyl groups in the polymer repeating units. SEM and AFM analyses highlighted that the obtained materials were nanostructurated hybrids. To evaluate the biological properties of the hybrids, their bioactivity and cytotoxicity were investigated as a function of the PCL amount. The bioactivity of the synthesized systems was proven by the formation of a hydroxyapatite layer on the surface of samples soaked in a fluid simulating human blood plasma (SBF). MTT cytotoxicity tests and Trypan Blue dye exclusion tests were carried out exposing NIH-3T3 mouse embryonic fibroblasts for 24 and 48 h to extracts from the investigated hybrid materials. The results showed that all the hybrids had a non-cytotoxic effect on target cells. - Highlights: • TiO 2 /PCL hybrids were obtained by the sol–gel process for biomedical applications. • Synthesized materials were found to be first-class hybrid nanocomposites. • Hybrids appear to be bioactive, a fundamental characteristic for osseointegration. • MTT and Trypan Blue viability test show that the materials are biocompatible. • The organic phase is able to modulate the biocompatibility of the materials

The preosteoblast response of electrospinning PLGA/PCL nanofibers: effects of biomimetic architecture and collagen I

Directory of Open Access Journals (Sweden)

Qian YZ

2016-08-01

Full Text Available Yunzhu Qian,1,2 Hanbang Chen,1 Yang Xu,1 Jianxin Yang,2 Xuefeng Zhou,3 Feimin Zhang,1 Ning Gu3 1Jiangsu Key Laboratory of Oral Diseases, Nanjing Medical University, Nanjing, 2Center of Stomatology, The Second Affiliated Hospital of Soochow University, Suzhou, 3School of Biological Science and Medical Engineering, Southeast University, Nanjing, People’s Republic of China Abstract: Constructing biomimetic structure and incorporating bioactive molecules is an effective strategy to achieve a more favorable cell response. To explore the effect of electrospinning (ES nanofibrous architecture and collagen I (COL I-incorporated modification on tuning osteoblast response, a resorbable membrane composed of poly(lactic-co-glycolic acid/poly(caprolactone (PLGA/PCL; 7:3 w/w was developed via ES. COL I was blended into PLGA/PCL solution to prepare composite ES membrane. Notably, relatively better cell response was delivered by the bioactive ES-based membrane which was fabricated by modification of 3,4-dihydroxyphenylalanine and COL I. After investigation by field emission scanning electron microscopy, Fourier transform infrared spectroscopy, contact angle measurement, and mechanical test, polyporous three-dimensional nanofibrous structure with low tensile force and the successful integration of COL I was obtained by the ES method. Compared with traditional PLGA/PCL membrane, the surface hydrophilicity of collagen-incorporated membranes was largely enhanced. The behavior of mouse preosteoblast MC3T3-E1 cell infiltration and proliferation on membranes was studied at 24 and 48 hours. The negative control was fabricated by solvent casting. Evaluation of cell adhesion and morphology demonstrated that all the ES membranes were more favorable for promoting the cell adhesion and spreading than the casting membrane. Cell Counting Kit-8 assays revealed that biomimetic architecture, surface topography, and bioactive properties of membranes were favorable for cell

Effect of Ethyl Ester L-Lysine Triisocyanate addition to produce reactive PLA/PCL bio-polyester blends for biomedical applications.

Science.gov (United States)

Visco, Annamaria; Nocita, Davide; Giamporcaro, Alberto; Ronca, Sara; Forte, Giuseppe; Pistone, Alessandro; Espro, Claudia

2017-04-01

We report in this paper the effects of Ethyl Ester L-Lysine Triisocyanate (LTI) on the physical-mechanical properties of Poly(lactide)/Poly(ε-caprolactone) (PLA/PCL) polyesters blends. The PLA/PCL ratios considered were 20/80, 50/50 and 80/20 (wt/wt %) and LTI was added in amounts of 0.0-0.5-1.0 phr. PLA and PCL reacted with LTI during processing in a Brabender twin screw internal mixer to produce block copolymers in-situ. The resulting blends have been characterized by torque measurements, uniaxial tensile tests, Differential Scanning Calorimeter, contact angle measurements with a Phosphate Buffered Saline (PBS) solution, ATR analysis and morphological SEM observations. Experimental results highlighted how LTI enhanced interaction and dispersion of the two components, resulting into a synergic effect in mechanical properties. Mechanical and physical properties can be tailored by changing the blend composition. The most noticeable trend was an increase in ductility of the mixed polymers. Besides, LTI decreased blend's wet ability in PBS and lowered the starting of crystalline phase formation for both polymers, confirming an interaction among them. These reactive blends could find use as biomedical materials, e.g. absorbable suture threads or scaffolds for cellular growth. Copyright © 2017 Elsevier Ltd. All rights reserved.

TiO{sub 2}/PCL hybrid materials synthesized via sol–gel technique for biomedical applications

Energy Technology Data Exchange (ETDEWEB)

Catauro, M., E-mail: michelina.catauro@unina2.it [Department of Industrial and Information Engineering, Second University of Naples, Via Roma 29, 81031 Aversa (Italy); Bollino, F.; Papale, F. [Department of Industrial and Information Engineering, Second University of Naples, Via Roma 29, 81031 Aversa (Italy); Marciano, S.; Pacifico, S. [Department Environmental, Biological and Pharmaceutical Sciences and Technologies, Second University of Naples, Via Vivaldi 43, 81100 Caserta (Italy)

2015-02-01

The aim of the present work has been the synthesis of organic/inorganic hybrid materials based on titanium dioxide and poly(ε-caprolactone) (PCL) to be used in the biomedical field. Several materials have been synthesized using sol–gel methods by adding different amounts of polymer to the inorganic sol. The obtained gels have been characterized using Fourier transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM) and atomic force microscopy (AFM). The FT-IR data allowed us to hypothesize that the structure formed was that of an interpenetrating network, realized by hydrogen bonds between Ti-OH groups in the sol–gel intermediate species and carbonyl groups in the polymer repeating units. SEM and AFM analyses highlighted that the obtained materials were nanostructurated hybrids. To evaluate the biological properties of the hybrids, their bioactivity and cytotoxicity were investigated as a function of the PCL amount. The bioactivity of the synthesized systems was proven by the formation of a hydroxyapatite layer on the surface of samples soaked in a fluid simulating human blood plasma (SBF). MTT cytotoxicity tests and Trypan Blue dye exclusion tests were carried out exposing NIH-3T3 mouse embryonic fibroblasts for 24 and 48 h to extracts from the investigated hybrid materials. The results showed that all the hybrids had a non-cytotoxic effect on target cells. - Highlights: • TiO{sub 2}/PCL hybrids were obtained by the sol–gel process for biomedical applications. • Synthesized materials were found to be first-class hybrid nanocomposites. • Hybrids appear to be bioactive, a fundamental characteristic for osseointegration. • MTT and Trypan Blue viability test show that the materials are biocompatible. • The organic phase is able to modulate the biocompatibility of the materials.

Polymorphic solidification of Linezolid confined in electrospun PCL fibers for controlled release in topical applications.

Science.gov (United States)

Tammaro, Loredana; Saturnino, Carmela; D'Aniello, Sharon; Vigliotta, Giovanni; Vittoria, Vittoria

2015-07-25

Poly(ϵ-caprolactone) (PCL) membranes loaded with Linezolid, chemically N-[[(5S)-3-[3-fluoro-4-(4-morpholinyl)phenyl]-2-oxo-5-oxazolidinyl]methyl]acetamide (empirical formula C16H20FN3O4) have been prepared by electrospinning technique, at different Linezolid concentrations (0.5, 1, 2.5 and 5%, w/w). Structural characterization, morphological analysis and the study of the mechanical properties have been performed on loaded membranes and compared with neat PCL membranes. Linezolid embedded in the membranes is prevalently amorphous, with a low crystallinity showing a different polymorphic form respect to the usual Form I and Form II. The release kinetics of the drug were studied by spectrophotometric analysis (UV-vis). It allowed to discriminate between Linezolid molecules on the surface and encapsulated into the fibers. The antibacterial activity of the electrospun membranes was effective to inhibit Staphylococcus aureus. The properties of the loaded membranes and their capability for local delivery of the antibiotic make them good candidates as drug release devices for topical use. Copyright © 2015 Elsevier B.V. All rights reserved.

Development of Emu oil-loaded PCL/collagen bioactive nanofibers for proliferation and stemness preservation of human adipose-derived stem cells: possible application in regenerative medicine.

Science.gov (United States)

Nejati-Koshki, Kazem; Pilehvar-Soltanahmadi, Younes; Alizadeh, Effat; Ebrahimi-Kalan, Abbas; Mortazavi, Yousef; Zarghami, Nosratollah

2017-12-01

Adipose tissue-derived stem cells (ASCs) are promising candidate in stem cell therapies, and maintaining their stemness potential is vital to achieve effective treatment. Natural-based scaffolds have been recently attracted increasing attention in nanomedicine and drug delivery. In the present study, a polymeric nanofibrous scaffold was developed based on the polycaprolactone/Collagen (PCL/Coll) containing Emu oil as a bioactive material to induce the proliferation of ASCs, while simultaneously preserving the stemness property of those cells. Fabrication of the electrospun Emu oil-loaded PCL/Coll nanofibers was confirmed by using FE-SEM, FTIR, and tensile test. ASCs were seeded on two types of nanofibers (PCL/Coll and Emu oil-loaded PCL/Coll) and their proliferation, cell cycle progression, and stemness gene expressions were evaluated using MTT, propidium iodide staining, and qPCR during 14 days, respectively. The results indicated that ASCs displayed improved adhesion capacity with the higher rates of bioactivity and proliferation on the Emu oil-loaded nanofibers than the other groups. The proliferation capacity of ASCs on Emu oil-loaded PCL/Coll nanofibers was further confirmed by the cell cycle progression analysis. It was also found that Emu oil-loaded nanofibers significantly up-regulated the expression of stemness markers including sox-2, nanog, oct4, klf4, and c-Myc. The results demonstrated that the nanofibers containing Emu oil can reinforce the cell adhesion and enhance ASCs proliferation while preserving their stemness; therefore, using scaffolds containing natural products may have a great potential to enhance the in vitro expansion capacity of ASCs in the field of stem cell therapy and regenerative medicine.

Immobilization of cross linked Col-I–OPN bone matrix protein on aminolysed PCL surfaces enhances initial biocompatibility of human adipogenic mesenchymal stem cells (hADMSC)

Energy Technology Data Exchange (ETDEWEB)

Kim, Young-Hee; Jyoti, Md. Anirban; Song, Ho-Yeon, E-mail: songmic@sch.ac.kr

2014-06-01

In bone tissue engineering surface modification is considered as one of the important ways of fabricating successful biocompatible material. Addition of biologically active functionality on the surfaces has been tried for improving the overall biocompatibility of the system. In this study poly-ε-caprolactone film surfaces have been modified through aminolysis and immobilization process. Collagen type I (COL-I) and osteopontin (OPN), which play an important role in osteogenesis, was immobilized onto PCL films followed by aminolysis treatment using 1,6-hexanediamine. Characterization of animolysed and immobilized surfaces were done by a number techniques using scanning electron microscopy (SEM), FT-IR, XPS, ninhydrin staining, SDS-PAGE and confocal microscopy and compared between the modified and un-modified surfaces. Results of the successive experiments showed that aminolysis treatment was homogeneously achieved which helped to entrap or immobilize Col-I–OPN proteins on surfaces of PCL film. In vitro studies with human adipogenic mesenchymal stem cells (hADMSC) also confirmed the attachment and proliferation of cells was better in modified PCL surfaces than the unmodified surfaces. SEM, confocal microscopy and MTT assay showed a significant increase in cell spreading, attachment and proliferations on the biofunctionalized surfaces compared to the unmodified PCL surfaces at all-time points indicating the success of surface biofunctionalization.

Supercritical CO2 impregnation of PLA/PCL films with natural substances for bacterial growth control in food packaging.

Science.gov (United States)

Milovanovic, Stoja; Hollermann, Gesa; Errenst, Cornelia; Pajnik, Jelena; Frerich, Sulamith; Kroll, Stephen; Rezwan, Kurosch; Ivanovic, Jasna

2018-05-01

Biodegradable polymers with antibacterial properties are highly desirable materials for active food packaging applications. Thymol, a dietary monoterpene phenol with a strong antibacterial activity is abundant in plants belonging to the genus Thymus. This study presents two approaches for supercritical CO 2 impregnation of poly(lactic acid)(PLA)/poly(ε-caprolactone)(PCL) blended films to induce antibacterial properties of the material: (i) a batch impregnation process for loading pure thymol, and (ii) an integrated supercritical extraction-impregnation process for isolation of thyme extract and its incorporation into the films, operated in both batch or semi-continuous modes with supercritical solution circulation. The PCL content in films, impregnation time and CO 2 flow regime were varied to maximize loading of the films with thymol or thyme extract with preserving films' structure and thermal stability. Representative film samples impregnated with thymol and thyme extract were tested against Gram (-) (Escherichia coli) and Gram(+) (Bacillus subtilis) model strains, by measuring their metabolic activity and re-cultivation after exposure to the films. The film containing thymol (35.8 wt%) showed a strong antibacterial activity leading to a total reduction of bacterial cell viability. Proposed processes enable fast, controlled and organic solvent-free fabrication of the PLA/PCL films containing natural antibacterial substances at moderately low temperature, with a compact structure and a good thermal stability, for potential use as active food packaging materials. Copyright © 2018 Elsevier Ltd. All rights reserved.

Personality traits as predictors of inpatient aggression in a high-security forensic psychiatric setting: prospective evaluation of the PCL-R and IPDE dimension ratings.

Science.gov (United States)

Langton, Calvin M; Hogue, Todd E; Daffern, Michael; Mannion, Aisling; Howells, Kevin

2011-05-01

The Dangerous and Severe Personality Disorder (DSPD) initiative in England and Wales provides specialized care to high-risk offenders with mental disorders. This study investigated the predictive utility of personality traits, assessed using the Psychopathy Checklist-Revised (PCL-R) and the International Personality Disorder Examination, with 44 consecutive admissions to the DSPD unit at a high-security forensic psychiatric hospital. Incidents of interpersonal physical aggression (IPA) were observed for 39% of the sample over an average 1.5-year period following admission. Histrionic personality disorder (PD) predicted IPA, and Histrionic, Borderline, and Antisocial PDs all predicted repetitive (2+ incidents of) IPA. PCL-R Factor 1 and Facets 1 and 2 were also significant predictors of IPA. PCL-R Factor 1 and Histrionic PD scores were significantly associated with imminence of IPA. Results were discussed in terms of the utility of personality traits in risk assessment and treatment of specially selected high-risk forensic psychiatric patients in secure settings.

Novel star-type methoxy-poly(ethylene glycol) (PEG)-poly({epsilon}-caprolactone) (PCL) copolymeric nanoparticles for controlled release of curcumin

Energy Technology Data Exchange (ETDEWEB)

Feng Runliang; Zhu Wenxia; Song Zhimei, E-mail: zhimei_song@126.com [University of Jinan, Shandong Academy of Medical Science, Department of Pharmaceutical Engineering, School of Medicine and Life Sciences (China); Zhao Liyan [Hebei North University, Department of Pharmacy (China); Zhai Guangxi [Shandong University, Department of Pharmaceutics, College of Pharmacy (China)

2013-06-15

To improve curcumin's (CURs) water solubility and release property, a novel star methoxy poly(ethylene glycol)-poly({epsilon}-caprolactone) (MPEG-PCL) copolymer was synthesized through O-alkylation, basic hydrolysis and ring-opening polymerization reaction with MPEG, epichlorohydrin, and {epsilon}-caprolactone as raw materials. The structure of the novel copolymer was characterized by {sup 1}H NMR, FT-IR, and GPC. The results of FT-IR and differential scanning calorimeter of CUR-loaded nanoparticles (NPs) prepared by dialysis method showed that CUR was successfully encapsulated into the SMP12 copolymeric NPs with 98.2 % of entrapment efficiency, 10.91 % of drug loading, and 88.4 {+-} 11.2 nm of mean particle diameter in amorphous forms. The dissolubility of nanoparticulate CUR was increased by 1.38 Multiplication-Sign 10{sup 5} times over CUR in water. The obtained blank copolymer showed no hemolysis. A sustained CUR release to a total of approximately 56.13 % was discovered from CUR-NPs in 40 % of ethanol saline solution within 72 h on the use of dialysis method. The release behavior fitted the ambiexponent and biphasic kinetics equation. In conclusion, the copolymeric NPs loading CUR might serve as a potential nanocarrier to improve the solubility and release property of CUR.

Name signs in Danish Sign Language

DEFF Research Database (Denmark)

Bakken Jepsen, Julie

2018-01-01

in spoken languages, where a person working as a blacksmith by his friends might be referred to as ‘The Blacksmith’ (‘Here comes the Blacksmith!’) instead of using the person’s first name. Name signs are found not only in Danish Sign Language (DSL) but in most, if not all, sign languages studied to date....... This article provides examples of the creativity of the users of Danish Sign Language, including some of the processes in the use of metaphors, visual motivation and influence from Danish when name signs are created.......A name sign is a personal sign assigned to deaf, hearing impaired and hearing persons who enter the deaf community. The mouth action accompanying the sign reproduces all or part of the formal first name that the person has received by baptism or naming. Name signs can be compared to nicknames...

45° sign switching of effective exchange bias due to competing anisotropies in fully epitaxial Co3FeN/MnN bilayers

Science.gov (United States)

Hajiri, T.; Yoshida, T.; Filianina, M.; Jaiswal, S.; Borie, B.; Asano, H.; Zabel, H.; Kläui, M.

2018-01-01

We report an unusual angular-dependent exchange bias effect in ferromagnet/antiferromagnet bilayers, where both ferromagnet and antiferromagnet are epitaxially grown. Numerical model calculations predict an approximately 45° period for the sign switching of the exchange-bias field, depending on the ratio between magnetocrystalline anisotropy and exchange-coupling constant. The switching of the sign is indicative of a competition between a fourfold magnetocrystalline anisotropy of the ferromagnet and a unidirectional anisotropy field of the exchange coupling. This predicted unusual angular-dependent exchange bias and its magnetization switching process are confirmed by measurements on fully epitaxial Co3FeN/MnN bilayers by longitudinal and transverse magneto-optic Kerr effect magnetometry. These results provide a deeper understanding of the exchange coupling phenomena in fully epitaxial bilayers with tailored materials and open up a complex switching energy landscape engineering by anisotropies.

Influence of PCL on mechanical properties and bioactivity of ZrO{sub 2}-based hybrid coatings synthesized by sol–gel dip coating technique

Energy Technology Data Exchange (ETDEWEB)

Catauro, Michelina, E-mail: michelina.catauro@unina2.it [Department of Industrial and Information Engineering, Second University of Naples, Via Roma 29, 81031 Aversa (Italy); Bollino, Flavia [Department of Industrial and Information Engineering, Second University of Naples, Via Roma 29, 81031 Aversa (Italy); Veronesi, Paolo [Department of Engineering “Enzo Ferrari”, University of Modena and Reggio Emilia, Via Vignolese 905, 41125 Modena (Italy); Lamanna, Giuseppe [Department of Industrial and Information Engineering, Second University of Naples, Via Roma 29, 81031 Aversa (Italy)

2014-06-01

The biological properties of medical implants can be enhanced through surface modifications such as to provide a firm attachment of the implant. In this study, organic–inorganic hybrid coatings have been synthesized via sol–gel dip coating. They consist of an inorganic ZrO{sub 2} matrix in which different amounts of poly(ε-caprolactone) have been entrapped to improve the mechanical properties of the films. The influence of the PCL amount on the microstructural, biological and mechanical properties of the coating has been investigated. Scanning electron microscopy (SEM) and X-ray diffraction (XRD) analyses have shown that the hybrids used for the coating are homogenous and totally amorphous materials; Fourier transform infrared spectroscopy (FT-IR) has demonstrated that hydrogen bonds arise between the organic and inorganic phases. SEM and atomic force microscopy (AFM) have highlighted the nanostructured nature of the film. SEM and EDS analyses, after soaking the samples in a simulated body fluid (SBF), have pointed out the apatite formation on the coating surface, which proves the bone-bonding ability of the nanocomposite bioactive films. Scratch and nano-indentation tests have shown that the coating hardness, stiffness and Young's modulus decrease in the presence of large amounts of the organic phase. - Highlights: • ZrO{sub 2}/PCL organic-inorganic hybrid coatings synthesis via sol-gel dip coating. • Coatings porosity and bioactivity increase in presence of high PCL amount. • Coatings Hardness and Young’s modulus decrease in presence of high PCL amount.

Spinal cheiro-oral syndrome: a common neurological entity in an unusual site.

Science.gov (United States)

Lin, Hung-Sheng; Yin, Hsin-Ling; Chui, Chi; Lui, Chun-Chung; Chen, Wei-Hsi

2011-01-01

Cheiro-oral syndrome (COS) is an established neurological entity characterized by a sensory impairment confined to the mouth angle and ipsilateral finger(s)/ hand. The current understanding of localization is a concomitant involvement of the spinothalamic and trigeminothalamic tract between the cortex and pons. The cervical spinal cord has not been mentioned in this situation yet, and this unusual location may heretofore increase the risk of misdiagnosis. Six patients who presented with unilateral COS due to cervical cord disorder are reported. All patients were women and their age ranged between 42 and 70 years. Their neurological deficits included unilateral paraesthesiae restricted to cheirooral distribution, positive radicular sign, and mild change of tendon reflex. Cervical spinal stenosis at middle/lower cervical spine with variable magnitude of cord compression and intrinsic cord damage was found. A diagnostic dilemma obviously arises from the lack of tangible neurological signs or typical pattern of myelopathy, in addition to the previous concept of cerebral involvement. A benign course ensued in all reported patients. Cheiro-oral syndrome can be an early neurological sign for cervical cord disorder; it further suggests that it is a strong neurological but weak localizing sign. A reciprocal influence of multiple factors is considered to generate COS at the cervical cord. Therefore, an absence of brain pathology should lead to a thorough examination of the cervical cord in case of COS.

Anterior cruciate ligament tear: comparison of MR features between complete and partial tear

International Nuclear Information System (INIS)

Song, Ki Young; Lee, Joo Hyuk; Park, Jin Hee; Lee, Yu Jin; Rho, Eun Jin; Kim, Young Hoon; Yi, Jeong Geun; Ahn, Joong Mo

1997-01-01

To determine the MRI features which distinguish complete and partial tear of the anterior cruciate ligament(ACL) and to thus improve MRI interpretation. In 80 patients, we analyzed MR findings of direct and indirect signs of ACL tear (complete tear, 61 cases, partial tear, 19 cases) confirmed by arthroscopy or surgery, and compared the relative incidence of each sign in cases of complete and partial tear. Direct and indirect signs were found in 61 (100%) and 60 cases (98.4%), respectively, in complete tears, but in 16 (84.2%) and 15 cases (78.9%), respectively, in partial tears. Poor visualization, discontinuity and hyperintensity were seen in all complete tears but in only nine cases (47.4%) of partial tear. A wavy or abnormal contour was seen in 53 cases (86.9%) of complete tear and 14 (73.7%) of partial tear. A wavy contour without other direct signs was seen in only five cases (26.3%) of partial tear. Three cases (15.8%) of partial tear showed normal MR finding. Indirect signs, i.e. abnormal ACL angle, abnormal ACL-Blumensaat line angle, abnormal posterior cruciate ligament (PCL) line, abnormal PCL angle, PCL buckling, anterior displacement of tibia, posterior displacement of lateral meniscus, bone bruise, Segond fracture, tear of collateral ligaments, PCL, and tear of meniscus were commoner in complete than in partial tears. Two cases of O'Donoghue's triad and two of popliteus injury were seen only in complete tears. Direct and indirect signs of ACL tear were more commonly noted in complete than in partial tears. The latter showed MR features varying from normal to almost complete tear. We suggest that a wavy contour without other direct signs is indicative of a partial tear, and that O'Donoghue's triad and popliteus muscle injury are indirect signs of a complete tear

On the System of Person-Denoting Signs in Estonian Sign Language: Estonian Name Signs

Science.gov (United States)

Paales, Liina

2010-01-01

This article discusses Estonian personal name signs. According to study there are four personal name sign categories in Estonian Sign Language: (1) arbitrary name signs; (2) descriptive name signs; (3) initialized-descriptive name signs; (4) loan/borrowed name signs. Mostly there are represented descriptive and borrowed personal name signs among…

DETAILED CHEMICAL ABUNDANCES OF FOUR STARS IN THE UNUSUAL GLOBULAR CLUSTER PALOMAR 1

International Nuclear Information System (INIS)

Sakari, Charli M.; Venn, Kim A.; Irwin, Mike; Aoki, Wako; Arimoto, Nobuo; Dotter, Aaron

2011-01-01

Detailed chemical abundances for 21 elements are presented for four red giants in the anomalous outer halo globular cluster Palomar 1 (R GC = 17.2 kpc, Z = 3.6 kpc) using high-resolution (R = 36, 000) spectra from the High Dispersion Spectrograph on the Subaru Telescope. Pal 1 has long been considered unusual because of its low surface brightness, sparse red giant branch, young age, and its possible association with two extragalactic streams of stars. This paper shows that its chemistry further confirms its unusual nature. The mean metallicity of the four stars, [Fe/H] = -0.60 ± 0.01, is high for a globular cluster so far from the Galactic center, but is low for a typical open cluster. The [α/Fe] ratios, though in agreement with the Galactic stars within the 1σ errors, agree best with the lower values in dwarf galaxies. No signs of the Na/O anticorrelation are detected in Pal 1, though Na appears to be marginally high in all four stars. Pal 1's neutron-capture elements are also unusual: its high [Ba/Y] ratio agrees best with dwarf galaxies, implying an excess of second-peak over first-peak s-process elements, while its [Eu/α] and [Ba/Eu] ratios show that Pal 1's contributions from the r-process must have differed in some way from normal Galactic stars. Therefore, Pal 1 is unusual chemically, as well in its other properties. Pal 1 shares some of its unusual abundance characteristics with the young clusters associated with the Sagittarius dwarf galaxy remnant and the intermediate-age LMC clusters, and could be chemically associated with the Canis Majoris overdensity; however, it does not seem to be similar to the Monoceros/Galactic Anticenter Stellar Stream.

Assessment of polycaprolacton (PCL) nanocomposite scaffold compared with hydroxyapatite (HA) on healing of segmental femur bone defect in rabbits.

Science.gov (United States)

Eftekhari, Hadi; Jahandideh, Alireza; Asghari, Ahmad; Akbarzadeh, Abolfazl; Hesaraki, Saeed

2017-08-01

Segmental bone loss due to trauma, infection, and tumor resection and even non-union results in the vast demand for replacement and restoration of the function of the lost bone. The objective of this study is to utilize novel inorganic-organic nanocomposites for biomedical applications. Biodegradable implants have shown great promise for the repair of bone defects and have been commonly used as bone substitutes, which traditionally would be treated using metallic implants. In this study, 45 mature male New Zealand white rabbits 6-8 months and weighting 3-3.5 kg were examined. Rabbits were divided into three groups. Surgical procedures were done after an intramuscular injection of Ketamine 10% (ketamine hydrochloride, 50 mg/kg), Rompun 5% (xylazine, 5 mg/kg). Then an approximately 6 mm diameter - 5 mm cylinder bone defect was created in the femur of one of the hind limbs. After inducing the surgical wound, all rabbits were colored and randomly divided into three experimental groups of nine animals each: Group 1 received medical pure nanocomposite polycaprolactone (PCL) granules, Group 2 received hydroxyapatite and Group 3 was a control group with no treatment. Histopathological evaluation was performed on days 15, 30 and 45 after surgery. On day 45 after surgery, the quantity of newly formed lamellar bone in the healing site in PCL group was better than onward compared with HA and control groups. Finally, nanocomposite PCL granules exhibited a reproducible bone-healing potential.

Theoretical and Numerical Approaches for Determining the Reflection and Transmission Coefficients of OPEFB-PCL Composites at X-Band Frequencies.

Science.gov (United States)

Ahmad, Ahmad F; Abbas, Zulkifly; Obaiys, Suzan J; Ibrahim, Norazowa; Hashim, Mansor; Khaleel, Haider

2015-01-01

Bio-composites of oil palm empty fruit bunch (OPEFB) fibres and polycaprolactones (PCL) with a thickness of 1 mm were prepared and characterized. The composites produced from these materials are low in density, inexpensive, environmentally friendly, and possess good dielectric characteristics. The magnitudes of the reflection and transmission coefficients of OPEFB fibre-reinforced PCL composites with different percentages of filler were measured using a rectangular waveguide in conjunction with a microwave vector network analyzer (VNA) in the X-band frequency range. In contrast to the effective medium theory, which states that polymer-based composites with a high dielectric constant can be obtained by doping a filler with a high dielectric constant into a host material with a low dielectric constant, this paper demonstrates that the use of a low filler percentage (12.2%OPEFB) and a high matrix percentage (87.8%PCL) provides excellent results for the dielectric constant and loss factor, whereas 63.8% filler material with 36.2% host material results in lower values for both the dielectric constant and loss factor. The open-ended probe technique (OEC), connected with the Agilent vector network analyzer (VNA), is used to determine the dielectric properties of the materials under investigation. The comparative approach indicates that the mean relative error of FEM is smaller than that of NRW in terms of the corresponding S21 magnitude. The present calculation of the matrix/filler percentages endorses the exact amounts of substrate utilized in various physics applications.

Theoretical and Numerical Approaches for Determining the Reflection and Transmission Coefficients of OPEFB-PCL Composites at X-Band Frequencies.

Directory of Open Access Journals (Sweden)

Ahmad F Ahmad

Full Text Available Bio-composites of oil palm empty fruit bunch (OPEFB fibres and polycaprolactones (PCL with a thickness of 1 mm were prepared and characterized. The composites produced from these materials are low in density, inexpensive, environmentally friendly, and possess good dielectric characteristics. The magnitudes of the reflection and transmission coefficients of OPEFB fibre-reinforced PCL composites with different percentages of filler were measured using a rectangular waveguide in conjunction with a microwave vector network analyzer (VNA in the X-band frequency range. In contrast to the effective medium theory, which states that polymer-based composites with a high dielectric constant can be obtained by doping a filler with a high dielectric constant into a host material with a low dielectric constant, this paper demonstrates that the use of a low filler percentage (12.2%OPEFB and a high matrix percentage (87.8%PCL provides excellent results for the dielectric constant and loss factor, whereas 63.8% filler material with 36.2% host material results in lower values for both the dielectric constant and loss factor. The open-ended probe technique (OEC, connected with the Agilent vector network analyzer (VNA, is used to determine the dielectric properties of the materials under investigation. The comparative approach indicates that the mean relative error of FEM is smaller than that of NRW in terms of the corresponding S21 magnitude. The present calculation of the matrix/filler percentages endorses the exact amounts of substrate utilized in various physics applications.

45○ sign switching of effective exchange bias due to competing anisotropies in fully epitaxial Co3FeN/MnN bilayers.

Science.gov (United States)

Hajiri, Tetsuya; Yoshida, Takuya; Filianina, Mariia; Jaiswal, Samridh; Borie, Benjamin; Asano, H; Zabel, Hartmut; Klaui, Mathias

2017-11-20

We report an unusual angular-dependent exchange bias effect in ferromagnet/antiferromagnet bilayers, where both ferromagnet and antiferromagnet are epitaxially grown. Numerical model calculations predict an approximately 45$^\\circ$ period for the sign switching of the exchange-bias field, depending on the ratio between magnetocrystalline anisotropy and exchange-coupling constant. The switching of the sign is indicative of a competition between a fourfold magnetocrystalline anisotropy of the ferromagnet and a unidirectional anisotropy field of the exchange coupling. This predicted unusual angular-dependent exchange bias and its magnetization switching process are confirmed by measurements on fully epitaxial Co$_3$FeN/MnN bilayers by longitudinal and transverse magneto-optic Kerr effect magnetometry. These results provide a deeper understanding of the exchange coupling phenomena in fully epitaxial bilayers with tailored materials and open up a complex switching energy landscape engineering by anisotropies. © 2017 IOP Publishing Ltd.

A Solvent-Free Surface Suspension Melt Technique for Making Biodegradable PCL Membrane Scaffolds for Tissue Engineering Applications

Directory of Open Access Journals (Sweden)

Ratima Suntornnond

2016-03-01

Full Text Available In tissue engineering, there is limited availability of a simple, fast and solvent-free process for fabricating micro-porous thin membrane scaffolds. This paper presents the first report of a novel surface suspension melt technique to fabricate a micro-porous thin membrane scaffolds without using any organic solvent. Briefly, a layer of polycaprolactone (PCL particles is directly spread on top of water in the form of a suspension. After that, with the use of heat, the powder layer is transformed into a melted layer, and following cooling, a thin membrane is obtained. Two different sizes of PCL powder particles (100 µm and 500 µm are used. Results show that membranes made from 100 µm powders have lower thickness, smaller pore size, smoother surface, higher value of stiffness but lower ultimate tensile load compared to membranes made from 500 µm powder. C2C12 cell culture results indicate that the membrane supports cell growth and differentiation. Thus, this novel membrane generation method holds great promise for tissue engineering.

Using the PCL-R to Help Estimate the Validity of Two Self-Report Measures of Psychopathy with Offenders

Science.gov (United States)

Poythress, Norman G.; Lilienfeld, Scott O.; Skeem, Jennifer L.; Douglas, Kevin S.; Edens, John F.; Epstein, Monica; Patrick, Christopher J.

2010-01-01

Two self-report measures of psychopathy, Levenson's Primary and Secondary Psychopathy scales (LPSP) and the Psychopathic Personality Inventory (PPI), were administered to a large sample of 1,603 offenders. The most widely researched measure of criminal psychopathy, the Hare Psychopathy Checklist-Revised (PCL-R), served as a provisional referent…

A channel multiplexing for the analog input channel of the advantech PCL-718 ADC-12 bit by using PCLD-889 programmable ampliplexer / multiplexer board have been done

International Nuclear Information System (INIS)

Sudiyanto; Aminus, S; Sujono, Djoko; Ngatinu; Sudaryanto; Wiyana, Badi

1996-01-01

A channel multiplexing for the analog input channels of the Advantech PCL-718 ADC-12 bit by using PCLD-889 programmable Amplifier / multiplexer board have been done. The experiments have been prepared by using Turbo-C software where every PCLD-889 board multiplexes 16 differential input channels into one analog output channel, up to 10 PCLD-889 can be cascaded to expand the analog input of PCL-718 ADC-12 bit to 8 x 16 channels

Erysipelas in a free-range layer flock with conjunctival oedema as an unusual clinical sign.

Science.gov (United States)

Schmitt, Ferdinand; Schade, Benjamin; Böhm, Brigitte; Shimoji, Yoshihiro; Pfahler, Corinna

2014-01-01

Erysipelas was diagnosed in a free-range laying flock with a high mortality of up to 7% per day and a severe decrease in egg production to 45%. The disease had a short course and unusual clinical features for erysipelas, including swollen, lacrimating and encrusted eyes. Bacteriologically, trapped poultry red mites and affected animals were culture-positive for Erysipelothrix rhusiopathiae. Isolates from layers and mites were both serotype 1b. Histopathology revealed disseminated intravasal coagulopathy in conjunctival small vessels as the cause of the oedema of the eye adnexes. After treatment with penicillin, mortality and egg production returned to normal levels. Although erysipelas in laying hens is rarely reported, it can develop as an emerging disease in alternative rearing systems and should always be considered if mortality increases in an older flock, especially with a high infestation of poultry red mites.

Fabrication of hydroxyapatite-baghdadite nanocomposite scaffolds coated by PCL/Bioglass with polyurethane polymeric sponge technique

Directory of Open Access Journals (Sweden)

Ebrahim Karamian

2017-07-01

Full Text Available Objecttive (s: Silicate bioceramics like Baghdadite with chemical formula Ca3ZrSi2O9, has attracted the attention of researchers in biomedical field due to its remarkable in-vitro and in-vivo bioactivity and mechanical properties.Materials and Methods: Therefore, in the current study the baghdadite powder with Sol-Gel method was synthesized. Then, hydroxyapatite/Baghdadite (HA/Bagh scaffolds were prepared by the replacing the polyurethane polymeric sponge technique. Afterwhile, the ceramic scaffolds were sintered at 1150ºC for 3 h. The prepared scaffold was then coated by polycaprolactone/bioglass (PCL/BG polymer nanocomposite. Results: Bioactivity and biomineralization in the simulated body fluid (SBF revealed that the nanocomposite scaffolds coate with PCL/BG had significant bioactivity properties. The morophology and microstructure investigation of soaked samples in SBF indicate that bone-like apatite formed on the surfaces. Also, ion release in SBF containing the scaffolds was measured by inductively coupled plasma (ICP analysis. The nucleation positions of apatite crystals were areas with high silicon containing, Si+4 ion positions.Conclusion: The study indicates that scaffold containing 30 wt. % baghdadite had proper bioactivity behaviordue to its ability to form bone-like apatite on the surface of specimens.

A Multimethod Assessment of Juvenile Psychopathy: Comparing the Predictive Utility of the PCL:YV, YPI, and NEO PRI

Science.gov (United States)

Cauffman, Elizabeth; Kimonis, Eva R.; Dmitrieva, Julia; Monahan, Kathryn C.

2009-01-01

The current study compares 3 distinct approaches for measuring juvenile psychopathy and their utility for predicting short- and long-term recidivism among a sample of 1,170 serious male juvenile offenders. The assessment approaches compared a clinical interview method (the Psychopathy Checklist: Youth Version [PCL:YV]; Forth, Kosson, & Hare,…

"Psychometric properties of the PTSD Checklist for Diagnostic and Statistical Manual of Mental Disorders-Fifth Edition (PCL-5) in veterans": Correction to Bovin et al. (2016).

Science.gov (United States)

2017-06-01

Reports an error in "Psychometric properties of the PTSD Checklist for Diagnostic and Statistical Manual of Mental Disorders-Fifth Edition (PCL-5) in veterans" by Michelle J. Bovin, Brian P. Marx, Frank W. Weathers, Matthew W. Gallagher, Paola Rodriguez, Paula P. Schnurr and Terence M. Keane ( Psychological Assessment , 2016[Nov], Vol 28[11], 1379-1391). In the article, the departments and affiliations were incorrectly listed for authors Michelle J. Bovin, Brian P. Marx, Matthew W. Gallagher, Paola Rodriguez, Paula P. Schnurr, and Terence M. Keane. The first department and affiliation for authors Michelle J. Bovin, Brian P. Marx, Matthew W. Gallagher, Paola Rodriguez, and Terence M. Keane and should have read "National Center for PTSD at VA Boston Healthcare System, Boston, Massachusetts". The first department and affiliation for author Paula P. Schnurr should have read "National Center for PTSD, White River Junction, Vermont." The online version of this article has been corrected. (The following abstract of the original article appeared in record 2015-55809-001.) This study examined the psychometric properties of the posttraumatic stress disorder (PTSD) Checklist for Diagnostic and Statistical Manual of Mental Disorders-Fifth Edition (PCL-5; Weathers, Litz, et al., 2013b) in 2 independent samples of veterans receiving care at a Veterans Affairs Medical Center (N = 468). A subsample of these participants (n = 140) was used to define a valid diagnostic cutoff score for the instrument using the Clinician-Administered PTSD Scale for DSM-5 (CAPS-5; Weathers, Blake, et al., 2013) as the reference standard. The PCL-5 test scores demonstrated good internal consistency (α = .96), test-retest reliability (r = .84), and convergent and discriminant validity. Consistent with previous studies (Armour et al., 2015; Liu et al., 2014), confirmatory factor analysis revealed that the data were best explained by a 6-factor anhedonia model and a 7-factor hybrid model. Signal

The Influence of Lyophilized EmuGel Silica Microspheres on the Physicomechanical Properties, In Vitro Bioactivity and Biodegradation of a Novel Ciprofloxacin-Loaded PCL/PAA Scaffold

Directory of Open Access Journals (Sweden)

Mostafa Mabrouk

2016-06-01

Full Text Available A new composite poly(caprolactone (PCL and poly(acrylic acid (PAA (PCL:PAA 1:5 scaffold was synthesized via dispersion of PCL particles into a PAA network. Silica microspheres (Si (2–12 μm were then prepared by a lyophilized micro-emulsion/sol-gel (Emugel system using varying weight ratios. The model drug ciprofloxacin (CFX was used for in situ incorporation into the scaffold. The physicochemical and thermal integrity, morphology and porosity of the system was analyzed by X-Ray Diffraction (XRD, Attenuated Total Refelctance Fourier Transform Infrared (ATR-FTIR, Differential Scanning Calorimetry (DSC, SEM, surface area analysis and liquid displacement, respectively. The mechanical properties of the scaffold were measured by textural analysis and in vitro bioactivity, biodegradation and pH variations were evaluated by XRD, FTIR and SEM after immersion in Simulated Body Fluid (SBF. The in vitro and in vivo studies of the prepared scaffold were considered as future aspects for this study. CFX release was determined in phosphate buffer saline (PBS (pH 7.4; 37 °C. The incorporation of the Si microspheres and CFX into the scaffold was confirmed by XRD, FTIR, DSC and SEM, and the scaffold microstructure was dependent on the concentration of Si microspheres and the presence of CFX. The system displayed enhanced mechanical properties (4.5–14.73 MPa, in vitro bioactivity, biodegradation and controlled CFX release. Therefore, the PCL/PAA scaffolds loaded with Si microspheres and CFX with a porosity of up to 87% may be promising for bone tissue engineering.

Proposal to detect an emission of unusual super-high energy electrons in electron storage rings

Directory of Open Access Journals (Sweden)

Da-peng Qian

2014-01-01

Full Text Available According to an extended Lorentz–Einstein mass formula taken into the uncertainty principle, it is predicted that the electron beams passing accelerating electric field should with a small probability generate abnormal super-high energy electrons which are much higher than the beam energy. Author’s preliminary experiment result at electron storage ring has hinted these signs, so suggests to more strictly detect this unusual phenomenon, and thus to test the extended mass formula as well as a more perfect special relativity.

Modification of Ti6Al4V implant surfaces by biocompatible TiO{sub 2}/PCL hybrid layers prepared via sol-gel dip coating: Structural characterization, mechanical and corrosion behavior

Energy Technology Data Exchange (ETDEWEB)

Catauro, Michelina, E-mail: michelina.catauro@unina2.it [Department of Industrial and Information Engineering, Second University of Naples, Via Roma 21, 81031 Aversa (Italy); Bollino, Flavia [Department of Industrial and Information Engineering, Second University of Naples, Via Roma 21, 81031 Aversa (Italy); Giovanardi, Roberto; Veronesi, Paolo [Department of Engineering “Enzo Ferrari”, University of Modena and Reggio Emilia, Via Vivarelli 10, 41125 Modena (Italy)

2017-05-01

Surface modification of metallic implants is a promising strategy to improve tissue tolerance, osseointegration and corrosion resistance of them. In the present work, bioactive and biocompatible organic-inorganic hybrid coatings were prepared using a sol-gel dip coating route. They consist of an inorganic TiO{sub 2} matrix in which different percentages of poly(ε-caprolactone) (PCL), a biodegradable and biocompatible polymer, were incorporated. The coatings were used to modify the surface of Ti6Al4V substrates in order to improve their wear and corrosion resistance. The chemical structure of the coatings was analyzed by attenuated total reflectance (ATR) Fourier transform infrared (FTIR) spectroscopy. Coating microstructure, mechanical properties and ability to inhibit the corrosion of the substrates were evaluated as a function of the PCL amount. Scanning electron microscopy (SEM) showed that the polymer allows to obtain crack-free coatings, but when high percentages were added uncoated areas appear. Nano-indentation tests revealed that, as expected, surface hardness and elastic modulus decrease as the percentage of polymeric matrix increases, but scratch testing demonstrated that the coatings are effective in preventing scratching of the underlying metallic substrate, at least for PCL contents up to 20 wt%. The electrochemical tests (polarization curves acquired in order to evaluate the corrosion resistance) allowed to asses that the coatings have a significant effect in term of corrosion potential (E{sub corr}) but they do not significantly affect the passivation process that titanium undergoes in contact with the test solution used (modified Dulbecco's phosphate-buffered saline or DPBS). - Highlights: • Bioactive TiO{sub 2}/PCL hybrid coatings on Ti6Al4V were prepared via sol-gel dip coating. • Hybrid coatings are crack-free but when 50 wt% PCL was added, uncoated areas appear. • Coating hardness and elastic modulus decrease as the PCL percentage

Evaluation of the biotissue of PCL and β-TCP

International Nuclear Information System (INIS)

Solomao, Zenaide; Zavaglia, Cecilia A.C.

2011-01-01

The use of biomaterials to replace, repair injured tissues and organs of human beings has increased due to population growth and its higher life expectancy. The tissue engineering is an interdisciplinary field that integrates principles of biology, chemistry, genetics, materials science and biomedical engineering, to produce composite three-dimensional, capable of replacing biological tissues. The development of new biomaterials using the method of evaporation of the solvent can help to solvent this problem. This work aimed to characterized the membranes of poly (ε-caprolactone) dense and porous (scaffolds) of PCL/B-TCP; and make an in vitro evaluation. Techniques were used to: SEM, EDS, XRD, TGA, DSC, mechanical traction tests, test cell viability and activity of alkaline phosphatase (ALP). The hydrolytic degradation was analyzed in phosphate buffer (PBS) and the biocompatibility through standards (ASTM and ABNT) concluding that the materials are biocompatible and are used with great potential for replacement of the bone tissue. (author)

Biological response of human mesenchymal stromal cells to titanium grade 4 implants coated with PCL/ZrO2 hybrid materials synthesized by sol–gel route: in vitro evaluation

International Nuclear Information System (INIS)

Catauro, M.; Bollino, F.; Papale, F.; Mozetic, P.; Rainer, A.; Trombetta, M.

2014-01-01

The surface modification of implantable materials in order to improve their biological proprieties, including tissue tolerance and osseointegration ability, by means of functional coating deposition is a promising strategy to provide a firm fixation of the implants. In this study, organic/inorganic hybrid materials consisting of an inorganic zirconia-based matrix, in which a biocompatible polymer, poly(ε-caprolactone) (PCL), has been incorporated at different percentages, have been synthesized via sol–gel route. Developed materials have been used to coat titanium grade 4 substrates by means of dip coating technique. Scanning electron microscopy (SEM) analysis of the obtained coatings has shown that films crack-free can be obtained for high levels of PCL. Chemical composition and interactions between organic and inorganic moieties have been studied by Attenuated Total Reflectance Fourier Transform InfraRed spectroscopy. The bone-bonding capability of the nanocomposite films has been evaluated in vitro by examining the appearance of an apatite layer on their surface when soaked in a simulated body fluid by means of SEM equipped with EDS microanalysis. In vitro biocompatibility assessment was performed in combination with human mesenchymal stromal cells (hMSCs). Materials were found to be non-toxic and supporting cell proliferation. Additionally, the coating material was not hampering the differentiation of hMSCs in an osteogenic medium. - Highlights: • ZrO 2 /PCL hybrid coatings on Ti grade 4 were obtained by sol–gel dip coating process. • The PCL acts as a plasticizer and allows us to prepare crack-free coatings. • Independent of PCL amount, the films improve the titanium substrates' bioactivity. • The coatings are non-toxic and supportive of cell proliferation at all compositions. • The coatings don't hamper hMSC differentiation in an osteogenic medium

Copy number variation in CEP57L1 predisposes to congenital absence of bilateral ACL and PCL ligaments.

Science.gov (United States)

Liu, Yichuan; Li, Yun; March, Michael E; Nguyen, Kenny; Kenny, Nguyen; Xu, Kexiang; Wang, Fengxiang; Guo, Yiran; Keating, Brendan; Glessner, Joseph; Li, Jiankang; Ganley, Theodore J; Zhang, Jianguo; Deardorff, Matthew A; Xu, Xun; Hakonarson, Hakon

2015-11-11

Absence of the anterior (ACL) or posterior cruciate ligament (PCL) are rare congenital malformations that result in knee joint instability, with a prevalence of 1.7 per 100,000 live births and can be associated with other lower-limb abnormalities such as ACL agnesia and absence of the menisci of the knee. While a few cases of absence of ACL/PCL are reported in the literature, a number of large familial case series of related conditions such as ACL agnesia suggest a potential underlying monogenic etiology. We performed whole exome sequencing of a family with two individuals affected by ACL/PCL. We identified copy number variation (CNV) deletion impacting the exon sequences of CEP57L1, present in the affected mother and her affected daughter based on the exome sequencing data. The deletion was validated using quantitative PCR (qPCR), and the gene was confirmed to be expressed in ACL ligament tissue. Interestingly, we detected reduced expression of CEP57L1 in Epstein-Barr virus (EBV) cells from the two patients in comparison with healthy controls. Evaluation of 3D protein structure showed that the helix-binding sites of the protein remain intact with the deletion, but other functional binding sites related to microtubule attachment are missing. The specificity of the CNV deletion was confirmed by showing that it was absent in ~700 exome sequencing samples as well as in the database of genomic variations (DGV), a database containing large numbers of annotated CNVs from previous scientific reports. We identified a novel CNV deletion that was inherited through an autosomal dominant transmission from an affected mother to her affected daughter, both of whom suffered from the absence of the anterior and posterior cruciate ligaments of the knees.

Estudo das células Neuro2A sobre os biomateriais PCL e PLLA

Directory of Open Access Journals (Sweden)

Luiz Gabriel Maturana

2014-12-01

Full Text Available Os biomateriais poli L-ácido lático (PLLA e o poli caprolactona (PCL são os polímeros mais estudadas na área dos materiais bioreabsorvíveis. Dentre as suas principais características que contribuem para a interação celular, temos a especificidade química da superfície, elétrica, hidrofobicidade e topografia. Ainda, observa-se o tempo de degradação, porosidade, biocompatibilidade com o tecido biológico, bem como, a confecção com as mais variadas formas e dimensões. Já a prática da cultura celular, tem como objetivo estudar a adesão, migração, diferenciação e a proliferação celular utilizando-se um determinado material ou substância. Contudo, poucos trabalhos utilizando os biomateriais ora supracitados e a aplicação em células neuro2A foram realizados. Sabe-se que este tipo celular é derivado de células embrionárias da crista neural, as quais originam em neurônios simpáticos e apresentam como característica a imortalidade, portanto, são excelentes modelos em ensaios in vitro. Nesse sentido, o presente estudo avalia a adesão e a proliferação desta linhagem celular sobre os biopolímeros poli caprolactona (PCL e poli L-ácido lático (PLLA.

Biological response of human mesenchymal stromal cells to titanium grade 4 implants coated with PCL/ZrO{sub 2} hybrid materials synthesized by sol–gel route: in vitro evaluation

Energy Technology Data Exchange (ETDEWEB)

Catauro, M., E-mail: michelina.catauro@unina2.it [Department of Industrial and Information Engineering, Second University of Naples, Via Roma 29, 81031 Aversa (Italy); Bollino, F.; Papale, F. [Department of Industrial and Information Engineering, Second University of Naples, Via Roma 29, 81031 Aversa (Italy); Mozetic, P.; Rainer, A.; Trombetta, M. [Tissue Engineering Lab, Center for Integrated Research, “Università Campus Bio-Medico di Roma”, via Alvaro del Portillo, 00128 Rome (Italy)

2014-12-01

The surface modification of implantable materials in order to improve their biological proprieties, including tissue tolerance and osseointegration ability, by means of functional coating deposition is a promising strategy to provide a firm fixation of the implants. In this study, organic/inorganic hybrid materials consisting of an inorganic zirconia-based matrix, in which a biocompatible polymer, poly(ε-caprolactone) (PCL), has been incorporated at different percentages, have been synthesized via sol–gel route. Developed materials have been used to coat titanium grade 4 substrates by means of dip coating technique. Scanning electron microscopy (SEM) analysis of the obtained coatings has shown that films crack-free can be obtained for high levels of PCL. Chemical composition and interactions between organic and inorganic moieties have been studied by Attenuated Total Reflectance Fourier Transform InfraRed spectroscopy. The bone-bonding capability of the nanocomposite films has been evaluated in vitro by examining the appearance of an apatite layer on their surface when soaked in a simulated body fluid by means of SEM equipped with EDS microanalysis. In vitro biocompatibility assessment was performed in combination with human mesenchymal stromal cells (hMSCs). Materials were found to be non-toxic and supporting cell proliferation. Additionally, the coating material was not hampering the differentiation of hMSCs in an osteogenic medium. - Highlights: • ZrO{sub 2}/PCL hybrid coatings on Ti grade 4 were obtained by sol–gel dip coating process. • The PCL acts as a plasticizer and allows us to prepare crack-free coatings. • Independent of PCL amount, the films improve the titanium substrates' bioactivity. • The coatings are non-toxic and supportive of cell proliferation at all compositions. • The coatings don't hamper hMSC differentiation in an osteogenic medium.

Unusual manifestations of secondary urothelial carcinoma

Directory of Open Access Journals (Sweden)

Chaohui Lisa Zhao

2016-03-01

Full Text Available High-grade papillary urothelial carcinoma regularly invades the bladder wall, adjacent prostate, seminal vesicles, ureters, vagina, rectum, retroperitoneum, and regional lymph nodes. In advanced stages, it may disseminate to the liver, lungs, and bone marrow. On rare occasions, unusual metastatic foci like skin have been reported. The incidence of urothelial carcinoma has increased with associated rise in variants of urothelial carcinoma and unusual metastatic foci. It is imperative that urologists and pathologists are aware of the unusual variants and unusual metastatic locations to expedite the diagnostic process. Hereby we report an unusual case of secondary involvement of spinal nerve by conventional urothelial carcinoma. Also a second case of rhabdoid variant of urothelial carcinoma showing synchronous involvement of bladder and subcutaneous tissue of upper extremity is presented.

Unusual headache syndromes.

Science.gov (United States)

Queiroz, Luiz P

2013-01-01

Some headache syndromes have few cases reported in the literature. Their clinical characteristics, pathogenesis, and treatment may have not been completely defined. They may not actually be uncommon but rather under-recognized and/or underreported. A literature review of unusual headache syndromes, searching PubMed and ISI Web of Knowledge, was performed. After deciding which disorders to study, relevant publications in scientific journals, including original articles, reviews, meeting abstracts, and letters or correspondences to the editors were searched. This paper reviewed the clinical characteristics, the pathogenesis, the diagnosis, and the treatment of five interesting and unusual headache syndromes: exploding head syndrome, red ear syndrome, neck-tongue syndrome, nummular headache, and cardiac cephalgia. Recognizing some unusual headaches, either primary or secondary, may be a challenge for many non-headache specialist physicians. It is important to study them because the correct diagnosis may result in specific treatments that may improve the quality of life of these patients, and this can even be life saving. © 2013 American Headache Society.

Equivalência semântica da versão em português da Post-Traumatic Stress Disorder Checklist - Civilian Version (PCL-C para rastreamento do transtorno de estresse pós-traumático Equivalencia semántica de la versión en portugués de la Post-Traumatic Stress Disorder Checklist - Civilian Version (PCL-C para el rastreo del trastorno de estrés pos-traumático Semantic equivalence of the Portuguese version of the Post-Traumatic Stress Disorder Checklist - Civilian Version (PCL-C for the screening of post-traumatic stress disorder

Directory of Open Access Journals (Sweden)

William Berger

2004-08-01

Full Text Available INTRODUÇÃO: O transtorno do estresse pós-traumático (TEPT é bastante prevalente, atingindo de 2 a 5% da população em alguns países. Seus portadores apresentam pior qualidade de vida, maior número de detenções e problemas legais, e utilizam os serviços de saúde com maior freqüência quando comparados a indivíduos não acometidos. Apesar do crescimento da violência urbana no Brasil, ainda não dispomos de nenhum instrumento adaptado para nossa língua que seja capaz de rastrear o TEPT. Este artigo pretende traduzir, adaptar e avaliar a aplicabilidade da versão em português da Post-Traumatic Stress Disorder Checklist - Civilian Version (PCL-C, uma escala auto-aplicável amplamente utilizada em todo o mundo para rastreamento do transtorno do estresse pós-traumático. MÉTODOS: A comprovação da equivalência semântica da versão em português da PCL-C foi feita através de quatro etapas: tradução; retradução; apreciação formal de equivalência e adaptação; e interlocução com a população-alvo. RESULTADOS: Foi criada uma versão em português da PCL-C que manteve o significado semântico da versão original e mostrou-se de fácil compreensão e aplicabilidade. DISCUSSÃO: A PCL-C foi escolhida para este estudo por ser um instrumento amplamente utilizado em países de língua inglesa e por possuir outras utilidades além do rastreamento do TEPT. A interlocução com a população-alvo, feita com um número relativamente pequeno de indivíduos (n = 21, mostrou que alguns participantes entenderam o termo "estresse" como uma rotina de vida cansativa. CONCLUSÃO: Uma vez obtida a equivalência semântica da versão em português da PCL-C, estudos posteriores deverão determinar suas características psicométricas para a população brasileira.INTRODUCCÍON: El trastorno de estrés postraumático (TEPT es bastante común, afectando del 2 al 5% de la población en algunos países. Quienes lo padecen presentan una inferior

Nipple Discharge: An Early Warning Sign of Breast Cancer

Science.gov (United States)

Parthasarathy, Veda; Rathnam, Usharani

2012-01-01

Nipple discharge (ND) can be the earliest presenting symptom of breast cancer. We hereby present two cases of breast cancer with no palpable mass manifesting as isolated ND, which was whitish in color. In both cases, cytology of the discharge revealed highly pleomorphic cells indicating a high grade malignancy. Mammography showed diffuse, extensive microcalcifications. Simple mastectomy with axillary clearance was done. Histology in both cases revealed diffusely spreading intraductal carcinoma, with focus of microinvasion in one case. ND if scanty or not blood stained is often ignored by the patients and at times, the clinicians. This article highlights that ND can be an early warning sign of intraductal carcinomas that are non-invasive in early stage. Irrespective of the color or nature of the discharge, unilateral ND needs to be evaluated. Proper clinical assessment, cytological evaluation of the ND, and mammography ought to be performed in all such cases. Considering the low level of awareness in women regarding the warning signs of breast cancer, the current focus is to create “breast awareness.” Women should be sensitized to recognize any unusual changes in their breasts and report to their health care providers at the earliest. PMID:23189234

Sign Lowering and Phonetic Reduction in American Sign Language.

Science.gov (United States)

Tyrone, Martha E; Mauk, Claude E

2010-04-01

This study examines sign lowering as a form of phonetic reduction in American Sign Language. Phonetic reduction occurs in the course of normal language production, when instead of producing a carefully articulated form of a word, the language user produces a less clearly articulated form. When signs are produced in context by native signers, they often differ from the citation forms of signs. In some cases, phonetic reduction is manifested as a sign being produced at a lower location than in the citation form. Sign lowering has been documented previously, but this is the first study to examine it in phonetic detail. The data presented here are tokens of the sign WONDER, as produced by six native signers, in two phonetic contexts and at three signing rates, which were captured by optoelectronic motion capture. The results indicate that sign lowering occurred for all signers, according to the factors we manipulated. Sign production was affected by several phonetic factors that also influence speech production, namely, production rate, phonetic context, and position within an utterance. In addition, we have discovered interesting variations in sign production, which could underlie distinctions in signing style, analogous to accent or voice quality in speech.

Hashimoto thyroiditis with an unusual presentation of cardiac tamponade in Noonan syndrome.

Science.gov (United States)

Lee, Mi Ji; Kim, Byung Young; Ma, Jae Sook; Choi, Young Earl; Kim, Young Ok; Cho, Hwa Jin; Kim, Chan Jong

2016-11-01

Noonan syndrome is an autosomal dominant, multisystem disorder. Autoimmune thyroiditis with hypothyroidism is an infrequent feature in patients with Noonan syndrome. A 16-year-old boy was admitted because of chest discomfort and dyspnea; an echocardiogram revealed pericardial effusion. Additional investigations led to a diagnosis of severe hypothyroidism due to Hashimoto thyroiditis. The patient was treated with L-thyroxine at 0.15 mg daily. However, during admission, he developed symptoms of cardiac tamponade. Closed pericardiostomy was performed, after which the patient's chest discomfort improved, and his vital signs stabilized. Herein, we report a case of an adolescent with Noonan syndrome, who was diagnosed with Hashimoto thyroiditis with an unusual presentation of cardiac tamponade.

Large, cold, and unusual molecular cloud in Monoceros

International Nuclear Information System (INIS)

Maddalena, R.J.; Thaddeus, P.; and Columbia University)

1985-01-01

Observations of the J = 1 → 0 rotational transition of CO near the galactic plane in Monoceros (lroughly-equal216 0 ) reveal a molecular cloud with unusually low peak CO temperatures (T/sub R/ -1 ) typical of much warmer clouds. At the assumed distance of 3 kpc, the cloud is large (250 x 100 pc), has a mass of 7-11 x 10 5 M/sub sun/, and is well removed from the galactic midplane (130 pc). Except for a possible H II region, all the signs of star formation usually shown by clouds of comparable mass are missing. The cloud, unlike cloud complexes of similar size, is a single, continuous object that apparently has not been torn apart by star formation. Clouds with such properties are rare in the Galaxy; only one or two similar objects have been found. We discuss the possibility that the cloud is young and not yet forming stars but will evolve into a typical cloud complex once star formation begins

48 CFR 32.114 - Unusual contract financing.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Unusual contract financing... CONTRACTING REQUIREMENTS CONTRACT FINANCING Non-Commercial Item Purchase Financing 32.114 Unusual contract financing. Any contract financing arrangement that deviates from this part is unusual contract financing...

Interaction between a high purity magnesium surface and PCL and PLA coatings during dynamic degradation

International Nuclear Information System (INIS)

Chen Ying; Song Yang; Zhang Shaoxiang; Li Jianan; Zhao Changli; Zhang Xiaonong

2011-01-01

In this study, polycaprolactone (PCL) and polylactic acid (PLA) coatings were prepared on the surface of high purity magnesium (HPMs), respectively, and electrochemical and dynamic degradation tests were used to investigate the degradation behaviors of these polymer-coated HPMs. The experimental results indicated that two uniform and smooth polymer films with thicknesses between 15 and 20 μm were successfully prepared on the HPMs. Electrochemical tests showed that both PCL-coated and PLA-coated HPMs had higher free corrosion potentials (E corr ) and smaller corrosion currents (I corr ) in the modified simulated body fluid (m-SBF) at 37 0 C, compared to those of the uncoated HPMs. Dynamic degradation tests simulating the flow conditions in coronary arteries were carried out on a specific test platform. The weight of the specimens and the pH over the tests were recorded to characterize the corrosion performance of those samples. The surfaces of the specimens after the dynamic degradation tests were also examined. The data implied that there was a special interaction between HPM and its polymer coatings during the dynamic degradation tests, which undermined the corrosion resistance of the coated HPMs. A model was proposed to illustrate the interaction between the polymer coatings and HPM. This study also suggested that this reciprocity may also exist on the implanted magnesium stents coated with biodegradable polymers, which is a potential obstacle for the further development of drug-eluting magnesium stents.

Interaction between a high purity magnesium surface and PCL and PLA coatings during dynamic degradation

Energy Technology Data Exchange (ETDEWEB)

Chen Ying; Song Yang; Zhang Shaoxiang; Li Jianan; Zhao Changli; Zhang Xiaonong, E-mail: xnzhang@sjtu.edu.cn [State Key Laboratory of Metal Matrix Composites, School of Materials Science and Engineering, Shanghai Jiao Tong University, Shanghai 200240 (China)

2011-04-15

In this study, polycaprolactone (PCL) and polylactic acid (PLA) coatings were prepared on the surface of high purity magnesium (HPMs), respectively, and electrochemical and dynamic degradation tests were used to investigate the degradation behaviors of these polymer-coated HPMs. The experimental results indicated that two uniform and smooth polymer films with thicknesses between 15 and 20 {mu}m were successfully prepared on the HPMs. Electrochemical tests showed that both PCL-coated and PLA-coated HPMs had higher free corrosion potentials (E{sub corr}) and smaller corrosion currents (I{sub corr}) in the modified simulated body fluid (m-SBF) at 37 {sup 0}C, compared to those of the uncoated HPMs. Dynamic degradation tests simulating the flow conditions in coronary arteries were carried out on a specific test platform. The weight of the specimens and the pH over the tests were recorded to characterize the corrosion performance of those samples. The surfaces of the specimens after the dynamic degradation tests were also examined. The data implied that there was a special interaction between HPM and its polymer coatings during the dynamic degradation tests, which undermined the corrosion resistance of the coated HPMs. A model was proposed to illustrate the interaction between the polymer coatings and HPM. This study also suggested that this reciprocity may also exist on the implanted magnesium stents coated with biodegradable polymers, which is a potential obstacle for the further development of drug-eluting magnesium stents.

48 CFR 1332.114 - Unusual contract financing.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Unusual contract financing... CONTRACTING REQUIREMENTS CONTRACT FINANCING Non-Commercial Item Purchase Financing 1332.114 Unusual contract financing. The designee authorized to approve unusual contract financing arrangements is set forth in CAM...

Assessing Psychopathy Among Justice Involved Adolescents with the PCL: YV: An Item Response Theory Examination Across Gender

Science.gov (United States)

Tsang, Siny; Schmidt, Karen M.; Vincent, Gina M.; Salekin, Randall T.; Moretti, Marlene M.; Odgers, Candice L.

2014-01-01

This study used an item response theory (IRT) model and a large adolescent sample of justice involved youth (N = 1,007, 38% female) to examine the item functioning of the Psychopathy Checklist – Youth Version (PCL: YV). Items that were most discriminating (or most sensitive to changes) of the latent trait (thought to be psychopathy) among adolescents included “Glibness/superficial charm”, “Lack of remorse”, and “Need for stimulation”, whereas items that were least discriminating included “Pathological lying”, “Failure to accept responsibility”, and “Lacks goals.” The items “Impulsivity” and “Irresponsibility” were the most likely to be rated high among adolescents, whereas “Parasitic lifestyle”, and “Glibness/superficial charm” were the most likely to be rated low. Evidence of differential item functioning (DIF) on four of the 13 items was found between boys and girls. “Failure to accept responsibility” and “Impulsivity” were endorsed more frequently to describe adolescent girls than boys at similar levels of the latent trait, and vice versa for “Grandiose sense of self-worth” and “Lacks goals.” The DIF findings suggest that four PCL: YV items function differently between boys and girls. PMID:25580672

Radiographic features of plasma cell leukemia in the maxilla: A case report

Energy Technology Data Exchange (ETDEWEB)

Wong, Phillip; Kashtwari, Deeba; Nair, Madhu K. [Dept. of Oral and Maxillofacial Radiology, Oral and Maxillofacial Diagnostic Sciences/Radiology, Colleges of Dentistry/Medicine, University of Florida, Gainesville (United States)

2016-12-15

Plasma cell leukemia (PCL) is an aggressive form of multiple myeloma where there is hematogenous spread of abnormal plasma cells into the periphery. This is opposed to multiple myeloma, where the abnormal plasma cells stay in the bone marrow. PCL is more common in males than females, and is also more common in African-Americans than Caucasians. Signs and symptoms of PCL include, but are not limited to, renal insufficiency, hypercalcemia, anemia, lytic bone lesions, thrombocytopenia, hepatomegaly, and splenomegaly. Here, we discussed a case of a 71-year-old Caucasian female recently diagnosed with primary PCL with radiographic features of this disease throughout the body, with an emphasis on the maxillofacial skeleton and relevance from a dental standpoint.

The validity of military screening for mental health problems: diagnostic accuracy of the PCL, K10 and AUDIT scales in an entire military population.

Science.gov (United States)

Searle, Amelia K; Van Hooff, Miranda; McFarlane, Alexander C; Davies, Christopher E; Fairweather-Schmidt, A Kate; Hodson, Stephanie E; Benassi, Helen; Steele, Nicole

2015-03-01

Depression, alcohol use disorders and post-traumatic stress disorder (PTSD) are serious issues among military personnel due to their impact on operational capability and individual well-being. Several military forces screen for these disorders using scales including the Kessler Psychological Distress Scale (K10), Alcohol Use Disorders Identification Test (AUDIT), and Post-traumatic Stress Disorder Checklist (PCL). However, it is unknown whether established cutoffs apply to military populations. This study is the first to test the diagnostic accuracy of these three scales in a population-based military cohort. A large sample of currently-serving Australian Defence Force (ADF) Navy, Army and Air Force personnel (n = 24,481) completed the K10, AUDIT and PCL-C (civilian version). Then, a stratified sub-sample (n = 1798) completed a structured diagnostic interview detecting 30-day disorder. Data were weighted to represent the ADF population (n = 50,049). Receiver operating characteristic (ROC) analyses suggested all three scales had acceptable sensitivity and specificity, with areas under the curve from 0.75 to 0.93. AUDIT and K10 screening cutoffs closely paralleled established cutoffs, whereas the PCL-C screening cutoff resembled that recommended for US military personnel. These self-report scales represent a cost-effective and clinically-useful means of screening personnel for disorder. Military populations may need lower cutoffs than civilians to screen for PTSD. Copyright © 2014 John Wiley & Sons, Ltd.

Genetic and functional characterization of the gene cluster directing the biosynthesis of putisolvin I and II in Pseudomonas putida strain PCL1445

NARCIS (Netherlands)

Dubern, J.F.; Coppoolse, E.R.; Stiekema, W.J.; Bloemberg, G.V.

2008-01-01

Pseudomonas putida PCL1445 secretes two cyclic lipopeptides, putisolvin I and putisolvin II, which possess a surface-tension-reducing ability, and are able to inhibit biofilm formation and to break down biofilms of Pseudomonas species including Pseudomonas aeruginosa. The putisolvin synthetase gene

Efficacy of rhBMP-2 loaded PCL/PLGA/β-TCP guided bone regeneration membrane fabricated by 3D printing technology for reconstruction of calvaria defects in rabbit

International Nuclear Information System (INIS)

Shim, Jin-Hyung; Jeong, Chang-Mo; Huh, Jung-Bo; Jang, Jinah; Jeong, Sung-In; Cho, Dong-Woo; Yoon, Min-Chul

2014-01-01

We successfully fabricated a three-dimensional (3D) printing-based PCL/PLGA/β-TCP guided bone regeneration (GBR) membrane that slowly released rhBMP-2. To impregnate the GBR membrane with intact rhBMP-2, collagen solution encapsulating rhBMP-2 (5 µg ml −1 ) was infused into pores of a PCL/PLGA/β-TCP membrane constructed using a 3D printing system with four dispensing heads. In a release profile test, sustained release of rhBMP-2 was observed for up to 28 d. To investigate the efficacy of the GBR membrane on bone regeneration, PCL/PLGA/β-TCP membranes with or without rhBMP-2 were implanted in an 8 mm calvaria defect of rabbits. Bone formation was evaluated at weeks 4 and 8 histologically and histomorphometrically. A space making ability of the GBR membrane was successfully maintained in both groups, and significantly more new bone was formed at post-implantation weeks 4 and 8 by rhBMP-2 loaded GBR membranes. Interestingly, implantation with rhBMP-2 loaded GBR membranes led to almost entire healing of calvaria defects within 8 weeks. (paper)

Environmentally Friendly Compatibilizers from Soybean Oil for Ternary Blends of Poly(lactic acid-PLA, Poly(ε-caprolactone-PCL and Poly(3-hydroxybutyrate-PHB

Directory of Open Access Journals (Sweden)

María Jesús Garcia-Campo

2017-11-01

Full Text Available Ternary blends of poly(lactic acid (PLA, poly(3-hydroxybutyrate (PHB and poly(ε-caprolactone (PCL with a constant weight percentage of 60%, 10% and 30% respectively were compatibilized with soybean oil derivatives epoxidized soybean oil (ESO, maleinized soybean oil (MSO and acrylated epoxidized soybean oil (AESO. The potential compatibilization effects of the soybean oil-derivatives was characterized in terms of mechanical, thermal and thermomechanical properties. The effects on morphology were studied by field emission scanning electron microscopy (FESEM. All three soybean oil-based compatibilizers led to a noticeable increase in toughness with a remarkable improvement in elongation at break. On the other hand, both the tensile modulus and strength decreased, but in a lower extent to a typical plasticization effect. Although phase separation occurred, all three soybean oil derivatives led somewhat to compatibilization through reaction between terminal hydroxyl groups in all three biopolyesters (PLA, PHB and PCL and the readily reactive groups in the soybean oil derivatives, that is, epoxy, maleic anhydride and acrylic/epoxy functionalities. In particular, the addition of 5 parts per hundred parts of the blend (phr of ESO gave the maximum elongation at break while the same amount of MSO and AESO gave the maximum toughness, measured through Charpy’s impact tests. In general, the herein-developed materials widen the potential of ternary PLA formulations by a cost effective blending method with PHB and PCL and compatibilization with vegetable oil-based additives.

Environmentally Friendly Compatibilizers from Soybean Oil for Ternary Blends of Poly(lactic acid)-PLA, Poly(ε-caprolactone)-PCL and Poly(3-hydroxybutyrate)-PHB.

Science.gov (United States)

Garcia-Campo, María Jesús; Quiles-Carrillo, Luis; Masia, Jaime; Reig-Pérez, Miguel Jorge; Montanes, Nestor; Balart, Rafael

2017-11-22

Ternary blends of poly(lactic acid) (PLA), poly(3-hydroxybutyrate) (PHB) and poly(ε-caprolactone) (PCL) with a constant weight percentage of 60%, 10% and 30% respectively were compatibilized with soybean oil derivatives epoxidized soybean oil (ESO), maleinized soybean oil (MSO) and acrylated epoxidized soybean oil (AESO). The potential compatibilization effects of the soybean oil-derivatives was characterized in terms of mechanical, thermal and thermomechanical properties. The effects on morphology were studied by field emission scanning electron microscopy (FESEM). All three soybean oil-based compatibilizers led to a noticeable increase in toughness with a remarkable improvement in elongation at break. On the other hand, both the tensile modulus and strength decreased, but in a lower extent to a typical plasticization effect. Although phase separation occurred, all three soybean oil derivatives led somewhat to compatibilization through reaction between terminal hydroxyl groups in all three biopolyesters (PLA, PHB and PCL) and the readily reactive groups in the soybean oil derivatives, that is, epoxy, maleic anhydride and acrylic/epoxy functionalities. In particular, the addition of 5 parts per hundred parts of the blend (phr) of ESO gave the maximum elongation at break while the same amount of MSO and AESO gave the maximum toughness, measured through Charpy's impact tests. In general, the herein-developed materials widen the potential of ternary PLA formulations by a cost effective blending method with PHB and PCL and compatibilization with vegetable oil-based additives.

Nano/micro hybrid scaffold of PCL or P3HB nanofibers combined with silk fibroin for tendon and ligament tissue engineering.

Science.gov (United States)

Naghashzargar, Elham; Farè, Silvia; Catto, Valentina; Bertoldi, Serena; Semnani, Dariush; Karbasi, Saeed; Tanzi, Maria Cristina

2015-07-04

A novel biodegradable nano/micro hybrid structure was obtained by electrospinning P3HB or PCL nanofibers onto a twisted silk fibroin (SF) structure, with the aim of fabricating a suitable scaffold for tendon and ligament tissue engineering. The electrospinning (ES) processing parameters for P3HB and PCL were optimized on 2D samples, and applied to produce two different nano/micro hybrid constructs (SF/ES-PCL and SF/ES-P3HB).Morphological, chemico-physical and mechanical properties of the novel hybrid scaffolds were evaluated by SEM, ATR FT-IR, DSC, tensile and thermodynamic mechanical tests. The results demonstrated that the nanofibers were tightly wrapped around the silk filaments, and the crystallinity of the SF twisted yarns was not influenced by the presence of the electrospun polymers. The slightly higher mechanical properties of the hybrid constructs confirmed an increase of internal forces due to the interaction between nano and micro components. Cell culture tests with L929 fibroblasts, in the presence of the sample eluates or in direct contact with the hybrid structures, showed no cytotoxic effects and a good level of cytocompatibility of the nano/micro hybrid structures in term of cell viability, particularly at day 1. Cell viability onto the nano/micro hybrid structures decreased from the first to the third day of culture when compared with the control culture plastic, but appeared to be higher when compared with the uncoated SF yarns. Although additional in vitro and in vivo tests are needed, the original fabrication method here described appears promising for scaffolds suitable for tendon and ligament tissue engineering.

Magnetic field control of 90 Degree-Sign , 180 Degree-Sign , and 360 Degree-Sign domain wall resistance

Energy Technology Data Exchange (ETDEWEB)

Majidi, Roya, E-mail: royamajidi@gmail.com [Department of Physics, Shahid Rajaee Teacher Training University, Lavizan, 16788-15811 Tehran (Iran, Islamic Republic of)

2012-10-01

In the present work, we have compared the resistance of the 90 Degree-Sign , 180 Degree-Sign , and 360 Degree-Sign domain walls in the presence of external magnetic field. The calculations are based on the Boltzmann transport equation within the relaxation time approximation. One-dimensional Neel-type domain walls between two domains whose magnetization differs by angle of 90 Degree-Sign , 180 Degree-Sign , and 360 Degree-Sign are considered. The results indicate that the resistance of the 360 Degree-Sign DW is more considerable than that of the 90 Degree-Sign and 180 Degree-Sign DWs. It is also found that the domain wall resistance can be controlled by applying transverse magnetic field. Increasing the strength of the external magnetic field enhances the domain wall resistance. In providing spintronic devices based on magnetic nanomaterials, considering and controlling the effect of domain wall on resistivity are essential.

Neck Pain in a 12-Year-Old Female: An Unusual Diagnosis.

Science.gov (United States)

Toto, Regina L; Zuckerbraun, Noel S; Manole, Mioara D

2016-08-01

Neck pain in the pediatric population has a broad differential diagnosis, ranging from benign to imminently life-threatening causes. Trauma and infection represent the most common etiologies of pediatric neck pain in the pediatric emergency department (PED) setting. Malignancy, though a rare cause of pediatric neck pain, is important to consider in patients with acquired torticollis or focal neurologic signs. We describe the case of a previously healthy 12-year-old female who presented to the PED with neck pain radiating down her upper extremities. The physical examination revealed diminished strength in her upper extremities compared to her lower extremities. Further evaluation revealed lymphadenopathy in the cervical and mediastinal areas and an epidural tumor in the cervical spinal column. The ultimate diagnosis was Hodgkin lymphoma presenting in an unusual manner with cervical spinal cord compression. WHY SHOULD AN EMERGENCY PHYSICIAN BE AWARE OF THIS?: Neck pain is a common chief complaint among pediatric patients in the emergency setting. This case of spinal cord compression caused by malignancy illustrates the necessity of detailed spinal imaging in patients with neck pain and "red flag" signs, including but not limited to an abnormal neurologic examination. Copyright © 2016 Elsevier Inc. All rights reserved.

Doxorubicin-Loaded PEG-PCL-PEG Micelle Using Xenograft Model of Nude Mice: Effect of Multiple Administration of Micelle on the Suppression of Human Breast Cancer

Directory of Open Access Journals (Sweden)

Ming-Fa Hsieh

2010-12-01

Full Text Available The triblock copolymer is composed of two identical hydrophilic segments: Monomethoxy poly(ethylene glycol (mPEG and one hydrophobic segment poly(ε‑caprolactone (PCL; which is synthesized by coupling of mPEG-PCL-OH and mPEG‑COOH in a mild condition using dicyclohexylcarbodiimide and 4-dimethylamino pyridine. The amphiphilic block copolymer can self-assemble into nanoscopic micelles to accommodate doxorubixin (DOX in the hydrophobic core. The physicochemical properties and in vitro tests, including cytotoxicity of the micelles, have been characterized in our previous study. In this study, DOX was encapsulated into micelles with a drug loading content of 8.5%. Confocal microscopy indicated that DOX was internalized into the cytoplasm via endocystosis. A dose-finding scheme of the polymeric micelle (placebo showed a safe dose of PEG-PCL-PEG micelles was 71.4 mg/kg in mice. Importantly, the circulation time of DOX-loaded micelles in the plasma significantly increased compared to that of free DOX in rats. A biodistribution study displayed that plasma extravasation of DOX in liver and spleen occurred in the first four hours. Lastly, the tumor growth of human breast cancer cells in nude mice was suppressed by multiple injections (5 mg/kg, three times daily on day 0, 7 and 14 of DOX-loaded micelles as compared to multiple administrations of free DOX.

Doxorubicin-Loaded PEG-PCL-PEG Micelle Using Xenograft Model of Nude Mice: Effect of Multiple Administration of Micelle on the Suppression of Human Breast Cancer

Energy Technology Data Exchange (ETDEWEB)

Cuong, Nguyen-Van [Department of Biomedical Engineering, Chung Yuan Christian University, 200, Chung Pei Rd., Chung Li, Taiwan (China); Department of Chemical Engineering, Ho Chi Minh City University of Industry, 12 Nguyen Van Bao St, Ho Chi Minh (Viet Nam); Jiang, Jian-Lin; Li, Yu-Lun [Department of Biomedical Engineering, Chung Yuan Christian University, 200, Chung Pei Rd., Chung Li, Taiwan (China); Chen, Jim-Ray [Department of Pathology, Chang Gung Memorial Hospital at Keelung, Taiwan and Chang Gung University, College of Medicine, Taoyuan, Taiwan (China); Jwo, Shyh-Chuan [Division of General Surgery, Chang Gung Memorial Hospital at Keelung, Taiwan and Chang Gung University, College of Medicine, Taoyuan, Taiwan (China); Hsieh, Ming-Fa, E-mail: mfhsieh@cycu.edu.tw [Department of Biomedical Engineering, Chung Yuan Christian University, 200, Chung Pei Rd., Chung Li, Taiwan (China)

2010-12-28

The triblock copolymer is composed of two identical hydrophilic segments Monomethoxy poly(ethylene glycol) (mPEG) and one hydrophobic segment poly(ε-caprolactone) (PCL); which is synthesized by coupling of mPEG-PCL-OH and mPEG-COOH in a mild condition using dicyclohexylcarbodiimide and 4-dimethylamino pyridine. The amphiphilic block copolymer can self-assemble into nanoscopic micelles to accommodate doxorubixin (DOX) in the hydrophobic core. The physicochemical properties and in vitro tests, including cytotoxicity of the micelles, have been characterized in our previous study. In this study, DOX was encapsulated into micelles with a drug loading content of 8.5%. Confocal microscopy indicated that DOX was internalized into the cytoplasm via endocystosis. A dose-finding scheme of the polymeric micelle (placebo) showed a safe dose of PEG-PCL-PEG micelles was 71.4 mg/kg in mice. Importantly, the circulation time of DOX-loaded micelles in the plasma significantly increased compared to that of free DOX in rats. A biodistribution study displayed that plasma extravasation of DOX in liver and spleen occurred in the first four hours. Lastly, the tumor growth of human breast cancer cells in nude mice was suppressed by multiple injections (5 mg/kg, three times daily on day 0, 7 and 14) of DOX-loaded micelles as compared to multiple administrations of free DOX.

Doxorubicin-Loaded PEG-PCL-PEG Micelle Using Xenograft Model of Nude Mice: Effect of Multiple Administration of Micelle on the Suppression of Human Breast Cancer

International Nuclear Information System (INIS)

Cuong, Nguyen-Van; Jiang, Jian-Lin; Li, Yu-Lun; Chen, Jim-Ray; Jwo, Shyh-Chuan; Hsieh, Ming-Fa

2010-01-01

The triblock copolymer is composed of two identical hydrophilic segments Monomethoxy poly(ethylene glycol) (mPEG) and one hydrophobic segment poly(ε-caprolactone) (PCL); which is synthesized by coupling of mPEG-PCL-OH and mPEG-COOH in a mild condition using dicyclohexylcarbodiimide and 4-dimethylamino pyridine. The amphiphilic block copolymer can self-assemble into nanoscopic micelles to accommodate doxorubixin (DOX) in the hydrophobic core. The physicochemical properties and in vitro tests, including cytotoxicity of the micelles, have been characterized in our previous study. In this study, DOX was encapsulated into micelles with a drug loading content of 8.5%. Confocal microscopy indicated that DOX was internalized into the cytoplasm via endocystosis. A dose-finding scheme of the polymeric micelle (placebo) showed a safe dose of PEG-PCL-PEG micelles was 71.4 mg/kg in mice. Importantly, the circulation time of DOX-loaded micelles in the plasma significantly increased compared to that of free DOX in rats. A biodistribution study displayed that plasma extravasation of DOX in liver and spleen occurred in the first four hours. Lastly, the tumor growth of human breast cancer cells in nude mice was suppressed by multiple injections (5 mg/kg, three times daily on day 0, 7 and 14) of DOX-loaded micelles as compared to multiple administrations of free DOX

Characterization of Polycaprolactone and Rice Husk Silica Composite (PCL-SiO2) by E-Spinning to Apply Supporter for Drug Release

Science.gov (United States)

Song, Sinae; Hilonga, Askwar; Taik Kim, Hee

2018-03-01

Polycaprolactone (PCL) is an interesting material to apply biomedical field owing to its biodegradability and biocompatibility which is suitable for a specific site with longer healing times. Blending the polymer with other materials has degradation property improved with the effective and economic method. This study was conducted to fabricate supporter based on Polycaprolactone and Rice husk silica (PCL-SiO2) by using electrospinning. Nano-porous silica in the composite was synthesized from rice husk having properties of economic, eco-friendly and high surface area. It drew to enhance the amount of drug loading in the carrier. Electrospinning technique is used to fabricate fibrous component by optimization condition obtained from previous mechanical properties experiments. Release experiment was carried out by the degree of dye absorbance at 544nm by ultraviolet–visible spectroscopy, the RhB in SiO2 alternative drug for modelling of drug release was released for 1 ~ 20 days at 37°C in phosphate buffer. Furthermore, the Mechanical property was confirmed by DSC, TGA. Morphology and degree of biodegradation were shown as SEM images and EDS.

Metacarpal sign

Directory of Open Access Journals (Sweden)

Barbara Nieradko-Iwanicka

2018-02-01

Full Text Available Background Archibald's sign, or metacarpal sign is defined as shortening of the IV and V metacarpal bones, is a rare phenomenon found in the Turner syndrome, homocystinuria and in Albright's osteodystrophy. Objectives The aim of the article was to show a rare case of metacarpal sign with atypical shortening of the III and IV metacarpal bones not connected with gonadal dysgenesia, genetic disorders nor osteodystrophy. Material and methods Case report of a 60-year-old female patient. Results Artchibald's metacarpal sign in the described case was accompanied by erosive arthritis in the left lower extremity. No features of genetic disorders nor gonadal disgenesia were found in the patient. Undifferentiated seronegative asymmetric erosive arthritis developed in the patient. The level of parathormon was within the normal range. No signs of tumor were seen in bone scintigraphy. Conclusions Archibald's metacarpal sign may be present in patients without genetic disorders.

Ergonomics and design: traffic sign and street name sign.

Science.gov (United States)

Moroni, Janaina Luisa da Silva; Aymone, José Luís Farinatti

2012-01-01

This work proposes a design methodology using ergonomics and anthropometry concepts applied to traffic sign and street name sign projects. Initially, a literature revision on cognitive ergonomics and anthropometry is performed. Several authors and their design methodologies are analyzed and the aspects to be considered in projects of traffic and street name signs are selected and other specific aspects are proposed for the design methodology. A case study of the signs of "Street of Antiques" in Porto Alegre city is presented. To do that, interviews with the population are made to evaluate the current situation of signs. After that, a new sign proposal with virtual prototyping is done using the developed methodology. The results obtained with new interviews about the proposal show the user satisfaction and the importance of cognitive ergonomics to development of this type of urban furniture.

Sign language comprehension: the case of Spanish sign language.

Science.gov (United States)

Rodríguez Ortiz, I R

2008-01-01

This study aims to answer the question, how much of Spanish Sign Language interpreting deaf individuals really understand. Study sampling included 36 deaf people (deafness ranging from severe to profound; variety depending on the age at which they learned sign language) and 36 hearing people who had good knowledge of sign language (most were interpreters). Sign language comprehension was assessed using passages of secondary level. After being exposed to the passages, the participants had to tell what they had understood about them, answer a set of related questions, and offer a title for the passage. Sign language comprehension by deaf participants was quite acceptable but not as good as that by hearing signers who, unlike deaf participants, were not only late learners of sign language as a second language but had also learned it through formal training.

Unusual cystic pancreatic neoplasms -image-pathological correlations

International Nuclear Information System (INIS)

Hilendarov, A.; Simova, E.; Petrova, A.; Traikova, N.; Deenichin, G.

2013-01-01

The aim is to present the variety of signs and symptoms from the diagnostic imaging methods of atypical neoplasms of the pancreas, presented as a type of cystic lesions. This often leads to unnecessary surgery or inappropriate tracking. In 115 patients (85 men and 30 women) with cystic lesions of the pancreas ultrasonic (US),computer tomography (CT) and magnetic resonance imaging (MRI) were performed and verified through histological and macroscopic pathology preparations. The ultrasound machines equipped with linear and convex transducers, MDCT and MRI imaging systems were used. In 14 of 115 patients atypical neoplasms of the pancreas were diagnosed: two cases with macroscopic serous cystic neoplasms, two nonmucinous cystic neoplasms, two hemorrhagic mucinous neoplasms, two ductal adenocarcinomas with cystic changes, one islet cell cystic tumor, two lymphoepithetial cysts, one lymphangioma, one solid papillary epithelial neoplasm and one mucinous adenocarcinoma. The authors take into consideration and overlapping of clinical symptoms and laboratory tests. Although much of the imaging features and morphological characteristics of cystic neoplasms of the pancreas are well known, should be known about the atypical unusual images in so-called 'typical' cystic neoplasms, cystic images in solid neoplasms and various atypical tumors with cystic lesions. (authors)

Headaches - danger signs

Science.gov (United States)

Migraine headache - danger signs; Tension headache - danger signs; Cluster headache - danger signs; Vascular headache - danger signs ... and other head pain. In: Goldman L, Schafer AI, eds. Goldman-Cecil Medicine . 25th ed. Philadelphia, PA: ...

Supramolecular self-assembly of novel thermo-responsive double-hydrophilic and hydrophobic Y-shaped [MPEO-b-PEtOx-b-(PCL)2] terpolymers

Czech Academy of Sciences Publication Activity Database

Petrova, Svetlana; Venturini, Cristina Garcia; Jäger, Alessandro; Jäger, Eliezer; Hrubý, Martin; Pavlova, Ewa; Štěpánek, Petr

2015-01-01

Roč. 5, č. 77 (2015), s. 62844-62854 ISSN 2046-2069 R&D Projects: GA MŠk(CZ) LH14079; GA MŠk(CZ) 7F14009 Institutional support: RVO:61389013 Keywords : Y-shaped [PEO-b-PEtOx-b-(PCL)2] terpolymers * light scattering * nanoparticles Subject RIV: CD - Macromolecular Chemistry Impact factor: 3.289, year: 2015

Novel thermo-responsive double-hydrophilic and hydrophobic MPEO-b-PEtOx-b-PCL triblock terpolymers: synthesis, characterization and self-assembly studies

Czech Academy of Sciences Publication Activity Database

Petrova, Svetlana; Venturini, Cristina Garcia; Jäger, Alessandro; Jäger, Eliezer; Černoch, Peter; Kereiche, S.; Kováčik, L.; Raška, I.; Štěpánek, Petr

2015-01-01

Roč. 59, 24 February (2015), s. 215-225 ISSN 0032-3861 R&D Projects: GA ČR GAP208/10/1600; GA MŠk(CZ) 7F14009 Institutional support: RVO:61389013 Keywords : MPEO-b-PEtOx-b-PCL triblock terpolymers * light-scattering * thermo-responsive nanoparticles Subject RIV: CF - Physical ; Theoretical Chemistry Impact factor: 3.586, year: 2015

Data on physicochemical properties of active films derived from plantain flour/PCL blends developed under reactive extrusion conditions

Directory of Open Access Journals (Sweden)

Tomy J. Gutiérrez

2017-12-01

Full Text Available The data given below relates to the research paper entitled: “Eco-friendly films prepared from plantain flour/PCL blends under reactive extrusion conditions using zirconium octanoate as a catalyst”, recently published by our research group [1]. This article provides information concerning the physicochemical properties of the above-mentioned film systems: thickness, density, opacity, moisture content and surface moisture. Keywords: Active films, Antimicrobial properties, Cross-linking, Poly(ε-caprolactone, Starchy

Sign language typology: The contribution of rural sign languages

NARCIS (Netherlands)

de Vos, C.; Pfau, R.

2015-01-01

Since the 1990s, the field of sign language typology has shown that sign languages exhibit typological variation at all relevant levels of linguistic description. These initial typological comparisons were heavily skewed toward the urban sign languages of developed countries, mostly in the Western

Biodegradation of blend films PVA/PVC, PVA/PCL in soil and soil with landfill leachate

Directory of Open Access Journals (Sweden)

Adriana de Campos

2011-12-01

Full Text Available This study investigated the biodegradation of blends films of poly(vinyl alcohol/poly(vinyl chloride (PVA/PVC and poly(vinyl alcohol/poly(caprolactone (PVA/PCL blends films prepared with dimethylformamide under a variety of conditions by respirometry, spectrophotometry (FTIR, scanning electron microscopy (SEM, and contact angle. The films were buried in the garden soil and in the soil mixed with the landfill leachate for 120 days at 28ºC. Significant levels of biodegradation were achieved in fairly short incubation times in the soil. The results indicated that PVA was the most biodegradable film in the soil and in the soil with the leachate.

The DWI 'reversal sign' of white matter hypoxic ischaemic injury in older children: an unusual MRI pattern for age

International Nuclear Information System (INIS)

Andronikou, Savvas; Van Toorn, Ronald

2009-01-01

We present two children beyond the neonatal and infant age who suffered global hypoxic events and showed an MRI appearance of reversal of the diffusion-weighted (DWI) and apparent diffusion coefficient (ADC) signal involving exclusively the white matter. This is an unusual distribution for this age group and may represent delayed postanoxic leukoencephalopathy. The appearance of this type of insult has been described as occurring in younger children more frequently than in adults. Awareness of this condition, the fact that it may occur earlier, and the peculiar and possibly deceptive DWI/ADC signal reversal pattern exclusively involving the white matter is critical for making a correct diagnosis and giving a prognosis. (orig.)

Malaysian sign language dataset for automatic sign language ...

African Journals Online (AJOL)

Journal of Fundamental and Applied Sciences. Journal Home · ABOUT ... SL recognition system based on the Malaysian Sign Language (MSL). Implementation results are described. Keywords: sign language; pattern classification; database.

Images in pediatrics: the thymic sail sign and thymic wave sign.

Science.gov (United States)

Alves, Nuno D; Sousa, Marta

2013-01-01

The authors present a radiographic image portraying the "thymic sail sign" and the "thymic wave sign," both normal findings in infant radiographs and present a short description of these signs. These are distinguished from pathologic findings such as the "spinnaker-sail sign" in pneumomediastinum.

Neurobrucellosis: clinical, diagnostic, therapeutic features and outcome. Unusual clinical presentations in an endemic region

Directory of Open Access Journals (Sweden)

Nurgul Ceran

Full Text Available Brucellosis is a zoonotic infection and has endemic characteristics. Neurobrucellosis is an uncommon complication of this infection. The aim of this study was to present unusual clinical manifestations and to discuss the management and outcome of a series of 18 neurobrucellosis cases. Initial clinical manifestations consist of pseudotumor cerebri in one case, white matter lesions and demyelinating syndrome in three cases, intracranial granuloma in one case, transverse myelitis in two cases, sagittal sinus thrombosis in one case, spinal arachnoiditis in one case, intracranial vasculitis in one case, in addition to meningitis in all cases. Eleven patients were male and seven were female. The most prevalent symptoms were headache (83% and fever (44%. All patients were treated with rifampicin, doxycycline plus trimethoprim-sulfamethoxazole or ceftriaxone. Duration of treatment (varied 3-12 months was determined on basis of the CSF response. In four patients presented with left mild sequelae including aphasia, hearing loss, hemiparesis. In conclusion, although mortality is rare in neurobrucellosis, its sequelae are significant. In neurobrucellosis various clinical and neuroradiologic signs and symptoms can be confused with other neurologic diseases. In inhabitants or visitors of endemic areas, neurobrucellosis should be kept in mind in cases that have unusual neurological manifestations.

Unusual Fears in Children with Autism

Science.gov (United States)

Mayes, Susan Dickerson; Calhoun, Susan L.; Aggarwal, Richa; Baker, Courtney; Mathapati, Santosh; Molitoris, Sarah; Mayes, Rebecca D.

2013-01-01

Unusual fears have long been recognized as common in autism, but little research exists. In our sample of 1033 children with autism, unusual fears were reported by parents of 421 (41%) of the children, representing 92 different fears. Many additional children had common childhood fears (e.g., dogs, bugs, and the dark). More than half of children…

Unusual radiological findings of adult-onset pulmonary tuberculosis

International Nuclear Information System (INIS)

Lee, Yong Chul; Lee, Jong Beum; Kim, Sue Hyun

1987-01-01

Usual chest radiographic findings in pulmonary tuberculosis are well described in radiologic literatures for both primary and postprimary phases of disease. During the last decade, many authors have enumerated the unusual manifestations of pulmonary tuberculosis in adult population. These unusual findings usually have been involved in the frequent failure of both radiologist and clinician to recognize that tuberculosis could be the cause of a abnormal chest radiograph in patients who are finally and surprisingly proven to have tuberculosis. Authors have evaluated 249 patients who were admitted and newly proven to have adult-onset pulmonary tuberculosis at Chung-Ang University Hospital from January, 1985 to December, 1986. Unusual findings were noted in 76 (30.5%) of the 249 patients with adult-onset pulmonary tuberculosis. These unusual findings most frequently could be seen in 3rd decades and showed no sex difference in incidence. A broad spectrum of abnormal findings including usual and unusual abnormalities were procedure by adult-onset pulmonary tuberculosis. The unusual radiographic findings were arbitrarily classified. Pleural effusion without parenchymal disease (10.0%), unusual location of infiltrate (5.6%) and atelectasis (3.2%) were relatively common. Hilar and / or mediastinal lymphnode enlargement (1.6%), cavity without parenchymal infiltrates (1.6%), septic lung-like infiltrates (1.6%), completely clear lungs (1.2%), miliary infiltrates (1.2%), fibrocalcific scar-like infiltrates (1.2%), masslike density (1.2%) and rheumatoid lung-like infiltrates (1.2%) were occasionally noted. Pneumothorax without parenchymal disease (0.4%) and bron chocutaneous fistula (0.4%) are. The recognition of these unusual findings could further improve the detection and diagnosis of adult-onset pulmonary tuberculosis

Myasthenia Gravis: Unusual Presentations and Diagnostic Pitfalls.

Science.gov (United States)

Rodolico, Carmelo; Parisi, Daniela; Portaro, Simona; Biasini, Fiammetta; Sinicropi, Stefano; Ciranni, Annamaria; Toscano, Antonio; Messina, Sonia; Musumeci, Olimpia; Vita, Giuseppe; Girlanda, Paolo

2016-08-30

Myasthenia gravis (MG) is an autoimmune disorder presenting with fluctuating, fatigable muscle weakness. Initial symptoms classically involve ocular and proximal limb muscles. Rarely, MG may onset with unusual features, so it can be misdiagnosed with other neuromuscular diseases. To describe unusual and atypical presentations of MG in a large cohort of patients, considering and discussing diagnostic difficulties and pitfalls. We report on 21 out of 508 MG patients, coming to our department in the last 27 years and presenting with atypical or unusual features. The diagnosis was achieved performing a careful clinical examination, a proper neurophysiological assessment, the neostigmine test, the AChR and MuSK antibodies assay and chest CT-scan. Patients with atypical/unusual MG onset were the 4.4% of all MG patients population. We describe seven different clinical categories: asymmetric distal upper limbs weakness, foot drop, isolated triceps brachii weakness and foot drop, post exertional axial weakness with dropped head, acute facial dyplegia, limb-girdle MG and MG with sudden lower limbs weakness and recurrent falls. Atypical and unusual presentations may increase the risk to misdiagnose or delay MG diagnosis. Isolated limb-girdle presentation is the most frequent atypical form in our series.

On the System of Place Name Signs in Estonian Sign Language

Directory of Open Access Journals (Sweden)

Liina Paales

2011-05-01

Full Text Available A place name sign is a linguistic-cultural marker that includes both memory and landscape. The author regards toponymic signs in Estonian Sign Language as representations of images held by the Estonian Deaf community: they reflect the geographical place, the period, the relationships of the Deaf community with hearing community, and the common and distinguishing features of the two cultures perceived by community's members. Name signs represent an element of signlore, which includes various types of creative linguistic play. There are stories hidden behind the place name signs that reveal the etymological origin of place name signs and reflect the community's memory. The purpose of this article is twofold. Firstly, it aims to introduce Estonian place name signs as Deaf signlore forms, analyse their structure and specify the main formation methods. Secondly, it interprets place-denoting signs in the light of understanding the foundations of Estonian Sign Language, Estonian Deaf education and education history, the traditions of local Deaf communities, and also of the cultural and local traditions of the dominant hearing communities. Both perspectives - linguistic and folkloristic - are represented in the current article.

Mechanical study of PLA-PCL fibers during in vitro degradation.

Science.gov (United States)

Vieira, A C; Vieira, J C; Ferra, J M; Magalhães, F D; Guedes, R M; Marques, A T

2011-04-01

The aliphatic polyesters are widely used in biomedical applications since they are susceptible to hydrolytic and/or enzymatic chain cleavage, leading to α-hydroxyacids, generally metabolized in the human body. This is particularly useful for many biomedical applications, especially, for temporary mechanical supports in regenerative medical devices. Ideally, the degradation should be compatible with the tissue recovering. In this work, the evolution of mechanical properties during degradation is discussed based on experimental data. The decrease of tensile strength of PLA-PCL fibers follows the same trend as the decrease of molecular weight, and so it can also be modeled using a first order equation. For each degradation stage, hyperelastic models such as Neo-Hookean, Mooney-Rivlin and second reduced order, allow a reasonable approximation of the material behavior. Based on this knowledge, constitutive models that describe the mechanical behavior during degradation are proposed and experimentally validated. The proposed theoretical models and methods may be adapted and used in other biodegradable materials, and can be considered fundamental tools in the design of regenerative medical devices where strain energy is an important requirement, such as, for example, ligaments, cartilage and stents. Copyright © 2010 Elsevier Ltd. All rights reserved.

Effect of film thickness on morphological evolution in dewetting and crystallization of polystyrene/poly(ε-caprolactone) blend films.

Science.gov (United States)

Ma, Meng; He, Zhoukun; Yang, Jinghui; Chen, Feng; Wang, Ke; Zhang, Qin; Deng, Hua; Fu, Qiang

2011-11-01

In this Article, the morphological evolution in the blend thin film of polystyrene (PS)/poly(ε-caprolactone) (PCL) was investigated via mainly AFM. It was found that an enriched two-layer structure with PS at the upper layer and PCL at the bottom layer was formed during spinning coating. By changing the solution concentration, different kinds of crystal morphologies, such as finger-like, dendritic, and spherulitic-like, could be obtained at the bottom PCL layer. These different initial states led to the morphological evolution processes to be quite different from each other, so the phase separation, dewetting, and crystalline morphology of PS/PCL blend films as a function of time were studied. It was interesting to find that the morphological evolution of PS at the upper layer was largely dependent on the film thickness. For the ultrathin (15 nm) blend film, a liquid-solid/liquid-liquid dewetting-wetting process was observed, forming ribbons that rupture into discrete circular PS islands on voronoi finger-like PCL crystal. For the thick (30 nm) blend film, the liquid-liquid dewetting of the upper PS layer from the underlying adsorbed PCL layer was found, forming interconnected rim structures that rupture into discrete circular PS islands embedded in the single lamellar PCL dendritic crystal due to Rayleigh instability. For the thicker (60 nm) blend film, a two-step liquid-liquid dewetting process with regular holes decorated with dendritic PCL crystal at early annealing stage and small holes decorated with spherulite-like PCL crystal among the early dewetting holes at later annealing stage was observed. The mechanism of this unusual morphological evolution process was discussed on the basis of the entropy effect and annealing-induced phase separation.

LSE-Sign: A lexical database for Spanish Sign Language.

Science.gov (United States)

Gutierrez-Sigut, Eva; Costello, Brendan; Baus, Cristina; Carreiras, Manuel

2016-03-01

The LSE-Sign database is a free online tool for selecting Spanish Sign Language stimulus materials to be used in experiments. It contains 2,400 individual signs taken from a recent standardized LSE dictionary, and a further 2,700 related nonsigns. Each entry is coded for a wide range of grammatical, phonological, and articulatory information, including handshape, location, movement, and non-manual elements. The database is accessible via a graphically based search facility which is highly flexible both in terms of the search options available and the way the results are displayed. LSE-Sign is available at the following website: http://www.bcbl.eu/databases/lse/.

Sign language perception research for improving automatic sign language recognition

NARCIS (Netherlands)

Ten Holt, G.A.; Arendsen, J.; De Ridder, H.; Van Doorn, A.J.; Reinders, M.J.T.; Hendriks, E.A.

2009-01-01

Current automatic sign language recognition (ASLR) seldom uses perceptual knowledge about the recognition of sign language. Using such knowledge can improve ASLR because it can give an indication which elements or phases of a sign are important for its meaning. Also, the current generation of

Acute toxicity evaluation of in situ gel-forming controlled drug delivery system based on biodegradable poly(ε-caprolactone)-poly(ethylene glycol)-poly(ε-caprolactone) copolymer

International Nuclear Information System (INIS)

Fang Fang; Gong Changyang; Dong Pengwei; Fu Shaozhi; Gu Yingchun; Guo Gang; Zhao Xia; Wei Yuquan; Qian Zhiyong

2009-01-01

In this paper, biodegradable poly(ε-caprolactone)-poly(ethylene glycol)-poly(ε-caprolactone) (PCL-PEG-PCL) triblock copolymer was synthesized, and was characterized by FTIR, 1 H-NMR and GPC. The PCL-PEG-PCL/dimethyl sulfoxide (DMSO) solution displayed in situ gelling behavior when subcutaneously injected into the body. Toxicity tests and a histopathological study were performed in BALB/c mice. We focused mainly on acute organ toxicity of BALB/c mice by subcutaneous injection. In the acute toxicity test, the dose of subcutaneous injection was 5 g/kg body weight (b.w.), and the mice were observed continuously for 14 days. For the histopathological study, samples including heart, lung, liver, kidneys, spleen, stomach and intestine were histochemically prepared and stained with hematoxylin-eosin for histopathological examination. No mortality or significant signs of toxicity were observed during the whole observation period, and there is no significant lesion to be shown in histopathological study of major organs in the mice. Therefore, the maximal tolerance dose of dimethyl sulfoxide (DMSO) solution of PCL-PEG-PCL copolymer by subcutaneous injection was calculated to be higher than 5 g/kg b.w. Therefore, the PCL-PEG-PCL/DMSO system was thought to be non-toxic after subcutaneous injection, and it might be a candidate for an in situ gelling controlled drug delivery system.

48 CFR 632.114 - Unusual contract financing.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Unusual contract financing. 632.114 Section 632.114 Federal Acquisition Regulations System DEPARTMENT OF STATE GENERAL CONTRACTING REQUIREMENTS CONTRACT FINANCING Non-Commercial Item Purchase Financing 632.114 Unusual contract financing. The...

48 CFR 2432.114 - Unusual contract financing.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Unusual contract financing... DEVELOPMENT GENERAL CONTRACTING REQUIREMENTS CONTRACT FINANCING Non-Commercial Item Purchase Financing 2432.114 Unusual contract financing. The Senior Procurement Executive is the agency head for the purpose of...

Reduction of Fusarium wilt in watermelon by Pseudomonas chlororaphis PCL1391 and P. fluorescens WCS365

Directory of Open Access Journals (Sweden)

G.T. Tziros

2007-12-01

Full Text Available Fusarium wilt of watermelon (Citrullus lanatus caused by Fusarium oxysporum f. sp. niveum is a devastatine soil-borne disease that causes extensive losses throughout the world. Two known Pseudomonas biocontrol strains were used separately and in combination to assess their antagonistic effectiveness against F. oxysporum f. sp. niveum in pot experiments. P. chlororaphis PCL1391 signifi cantly reduced disease severity. P. fl uorescens WCS365 was less effective in disease suppression, while a combination of the two bacteria had intermediate effects. The biological control of Fusarium wilt with P. chlororaphis offers a potentially useful tool in an integrated pest management program to control Fusarium wilt of watermelon.

Unusual event report from Oskarshamn

International Nuclear Information System (INIS)

1996-01-01

The title of the report was intended to reflect the cause of the shutdown and the report to be regarded as a summary of the deficiencies that had been revealed and remedied. No single deficiency was regarded as reportable as an unusual event, but taken together the identified deficiencies deviated from the assumed safety level to the extent that it should be reported. The unusual event report refers to two main documents presenting measures taken to return to reported safety level, one concerning technical and one organizational measures

'Felson Signs' revisited

International Nuclear Information System (INIS)

George, Phiji P.; Irodi, Aparna; Keshava, Shyamkumar N.; Lamont, Anthony C.

2014-01-01

In this article we revisit, with the help of images, those classic signs in chest radiography described by Dr Benjamin Felson himself, or other illustrious radiologists of his time, cited and discussed in 'Chest Roentgenology'. We briefly describe the causes of the signs, their utility and the differential diagnosis to be considered when each sign is seen. Wherever possible, we use CT images to illustrate the basis of some of these classic radiographic signs.

48 CFR 2832.114 - Unusual contract financing.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 6 2010-10-01 2010-10-01 true Unusual contract financing... Contracting Requirements CONTRACT FINANCING Non-Commercial Item Purchase Financing 2832.114 Unusual contract financing. The HCA, or designee at a level not lower than the BPC, is the official authorized to approve...

sign-by-sign'' correlation

International Nuclear Information System (INIS)

Schmidt, Sabine; Lepori, Domenico; Meuwly, Jean-Yves; Duvoisin, Bertrand; Meuli, Reto; Schnyder, Pierre; Denys, Alban; Michetti, Pierre; Felley, Christian; Melle, Guy van

2003-01-01

Our objective was a prospective comparison of MR enteroclysis (MRE) with multidetector spiral-CT enteroclysis (MSCTE). Fifty patients with various suspected small bowel diseases were investigated by MSCTE and MRE. The MSCTE was performed using slices of 2.5 mm, immediately followed by MRE, obtaining T1- and T2-weighted sequences, including gadolinium-enhanced acquisition with fat saturation. Three radiologists independently evaluated MSCTE and MRE searching for 12 pathological signs. Interobserver agreement was calculated. Sensitivities and specificities resulted from comparison with pathological results (n=29) and patient's clinical evolution (n=21). Most pathological signs, such as bowel wall thickening (BWT), bowel wall enhancement (BWE) and lymphadenopathy (ADP), showed better interobserver agreement on MSCTE than on MRE (BWT: 0.65 vs 0.48; BWE: 0.51 vs 0.37; ADP: 0.52 vs 0.15). Sensitivity of MSCTE was higher than that of MRE in detecting BWT (88.9 vs 60%), BWE (78.6 vs 55.5%) and ADP (63.8 vs 14.3%). Wilcoxon signed-rank test revealed significantly better sensitivity of MSCTE than that of MRE for each observer (p=0.028, p=0.046, p=0.028, respectively). Taking the given study design into account, MSCTE provides better sensitivity in detecting lesions of the small bowel than MRE, with higher interobserver agreement. (orig.)

UNUSUAL LONG AND LUMINOUS OPTICAL TRANSIENT IN THE SUBARU DEEP FIELD

Energy Technology Data Exchange (ETDEWEB)

Urata, Yuji; Tsai, Patrick P. [Institute of Astronomy, National Central University, Chung-Li 32054, Taiwan (China); Huang, Kuiyun [Academia Sinica Institute of Astronomy and Astrophysics, Taipei 106, Taiwan (China); Morokuma, Tomoki; Motohara, Kentaro [Institute of Astronomy, Graduate School of Science, University of Tokyo, Mitaka, Tokyo 181-0015 (Japan); Yasuda, Naoki [Institute for the Physics and Mathematics of the Universe, University of Tokyo, Kashiwa 277-8568 (Japan); Tanaka, Masaomi; Hayashi, Masao; Kashikawa, Nobunari [Optical and Infrared Astronomy Division, National Astronomical Observatory, Mitaka, Tokyo 181-8588 (Japan); Ly, Chun [Space Telescope Science Institute, Baltimore, MD (United States); Malkan, Matthew A., E-mail: urata@astro.ncu.edu.tw [Department of Physics and Astronomy, UCLA, Box 951547, Los Angeles, CA (United States)

2012-11-20

We present observations of SDF-05M05, an unusual optical transient discovered in the Subaru Deep Field (SDF). The duration of the transient is > {approx} 800 days in the observer frame, and the maximum brightness during observation reached approximately 23 mag in the i' and z' bands. The faint host galaxy is clearly identified in all five optical bands of the deep SDF images. The photometric redshift of the host yields z {approx} 0.6 and the corresponding absolute magnitude at maximum is {approx} - 20. This implies that this event shone with an absolute magnitude brighter than -19 mag for approximately 300 days in the rest frame, which is significantly longer than a typical supernova and ultraluminous supernova. The total radiated energy during our observation was 1 Multiplication-Sign 10{sup 51} erg. The light curves and color evolution are marginally consistent with some luminous IIn supernovae. We suggest that the transient may be a unique and peculiar supernova at intermediate redshift.

An unusual neonatal presentation of anomalous origin of the left coronary artery arising from the pulmonary artery.

Science.gov (United States)

Garty, Y; Guri, A; Shinwell, E S; Matitiau, A

2008-01-01

We describe a previously unreported neonatal presentation of an anomalous origin of the left coronary artery arising from the pulmonary artery. This is a full-term female infant after normal pregnancy and delivery. The baby was diagnosed at 2 days of age due to weak femoral pulses noted on the routine nursery discharge examination. The cardiac examination revealed weak pulses everywhere and mild tachypnea and tachycardia. An electrocardiogram showed clear signs of ischemia. Echocardiography demonstrated an anomalous origin of the left coronary artery arising from the pulmonary artery with bidirectional blood flow. There was a severely depressed left ventricular function and mild mitral valve regurgitation. At 4 days of age, the infant underwent complete successful surgical repair with reimplantation of the anomalous coronary artery to the aorta. She recovered slowly but well. Fifteen months later she is doing well with no cardiac residua. A neonatal presentation is very unusual due to protective high pulmonary resistance after birth, with gradual decline in pressure and gradual onset of heart failure. This case may be related to an unusually rapid drop in pulmonary vascular resistance causing very early cardiac ischemia. (c) 2007 S. Karger AG, Basel.

Unusual raptor nests around the world

Science.gov (United States)

Ellis, D.H.; Craig, T.; Craig, E.; Postupalsky, S.; LaRue, C.T.; Nelson, R.W.; Anderson, D.W.; Henny, C.J.; Watson, J.; Millsap, B.A.; Dawson, J.W.; Cole, K.L.; Martin, E.M.; Margalida, A.; Kung, P.

2009-01-01

From surveys in many countries, we report raptors using unusual nesting materials (e.g., paper money, rags, metal, antlers, and large bones) and unusual nesting situations. For example, we documented nests of Steppe Eagles Aquila nipalensis and Upland Buzzards Buteo hemilasius on the ground beside well-traveled roads, Saker Falcon Falco cherrug eyries in attics and a cistern, and Osprey Pandion haliaetus nests on the masts of boats and on a suspended automobile. Other records include a Golden Eagle A. chrysaetos nest 7.0 m in height, believed to be the tallest nest ever described, and, for the same species, we report nesting in rudimentary nests. Some nest sites are within a few meters of known predators or competitors. These unusual observations may be important in revealing the plasticity of a species' behavioral repertoire. ?? 2009 The Raptor Research Foundation, Inc.

Rheological Characterization of Unusual DWPF Slurry Samples

International Nuclear Information System (INIS)

Koopman, D. C.

2005-01-01

A study was undertaken to identify and clarify examples of unusual rheological behavior in Defense Waste Processing Facility (DWPF) simulant slurry samples. Identification was accomplished by reviewing sludge, Sludge Receipt and Adjustment Tank (SRAT) product, and Slurry Mix Evaporator (SME) product simulant rheological results from the prior year. Clarification of unusual rheological behavior was achieved by developing and implementing new measurement techniques. Development of these new methods is covered in a separate report, WSRC-TR-2004-00334. This report includes a review of recent literature on unusual rheological behavior, followed by a summary of the rheological measurement results obtained on a set of unusual simulant samples. Shifts in rheological behavior of slurries as the wt. % total solids changed have been observed in numerous systems. The main finding of the experimental work was that the various unusual DWPF simulant slurry samples exhibit some degree of time dependent behavior. When a given shear rate is applied to a sample, the apparent viscosity of the slurry changes with time rather than remaining constant. These unusual simulant samples are more rheologically complex than Newtonian liquids or more simple slurries, neither of which shows significant time dependence. The study concludes that the unusual rheological behavior that has been observed is being caused by time dependent rheological properties in the slurries being measured. Most of the changes are due to the effect of time under shear, but SB3 SME products were also changing properties while stored in sample bottles. The most likely source of this shear-related time dependence for sludge is in the simulant preparation. More than a single source of time dependence was inferred for the simulant SME product slurries based on the range of phenomena observed. Rheological property changes were observed on the time-scale of a single measurement (minutes) as well as on a time scale of hours

Unusual death due to a bleeding from a varicose vein: a case report

Directory of Open Access Journals (Sweden)

Fragkouli Kleio

2012-09-01

Full Text Available Abstract Background Varicose veins are a common entity presenting a worldwide distribution. Although they are usually benign, sometimes are proved to be a threatening condition. Massive hemorrhage is an unusual complication of this common venous pathology that demands immediate medical intervention. Case presentation We present a case of a 66-year-old woman found dead in her house surrounded by a large quantity of blood. Autopsy revealed a 7 mm ulcer on the internal surface of the left lower leg communicating with a varicose vein, signs of exsanguinations and liver cirrhosis. Toxicological analysis was negative. Conclusion Massive hemorrhage from a ruptured varicosity is a severe medical emergency. Awareness of the risk of massive hemorrhage may provoke preventive treatment to be undertaken so as terminal loss of consciousness and a subsequent unattended death to be averted.

[Emotional processing in patients with a dissocial personality disorder subtype "psychopathy" according to PCL-R].

Science.gov (United States)

Weber, Tatjana; Sommer, Monika; Hajak, Göran; Müller, Jürgen

2004-11-01

Functional MRI was used to test the effects of the deficient emotional responsiveness of psychopathic patients on cognitive processes. We used a Simon-paradigm, in which ten healthy volunteers and ten patients with a diagnosis of "psychopathy" (defined by Hare Psychopathy Checklist Revised) have to select their spatially defined responses on the basis of a nonspatial stimuli feature. For the emotion induction pictures from the International Affective Picture System (IAPS) were selected. At the beginning and intermediated by the Simon-paradigm blocks of positive, negative or neutral pictures were presented. Patients with "psychopathy" exhibited untypical activation patterns in amygdala and prefrontal regions during interferences between negative or positive stimulations and cognitive tasks. These results demonstrated disturbed regulation of emotion-cognition-interaction in "psychopathy" according to PCL-R.

Morphology evolution of poly(L-lactic acid) (PLLA), poly(.epsilon.-caprolactone) (PCL) and polyethylene oxide (PEO) ternary blend and their effects on mechanical properties for bio scaffold applications

Czech Academy of Sciences Publication Activity Database

Ezzati, P.; Ghasemi, I.; Karrabi, M.; Azizi, H.; Fortelný, Ivan

2014-01-01

Roč. 38, č. 4 (2014), s. 449-456 ISSN 0379-153X Institutional support: RVO:61389013 Keywords : PLLA/PCL/PEO ternary blend * bio scaffold * melt blending Subject RIV: CD - Macromolecular Chemistry Impact factor: 0.528, year: 2014

Sign Inference for Dynamic Signed Networks via Dictionary Learning

Directory of Open Access Journals (Sweden)

Yi Cen

2013-01-01

Full Text Available Mobile online social network (mOSN is a burgeoning research area. However, most existing works referring to mOSNs deal with static network structures and simply encode whether relationships among entities exist or not. In contrast, relationships in signed mOSNs can be positive or negative and may be changed with time and locations. Applying certain global characteristics of social balance, in this paper, we aim to infer the unknown relationships in dynamic signed mOSNs and formulate this sign inference problem as a low-rank matrix estimation problem. Specifically, motivated by the Singular Value Thresholding (SVT algorithm, a compact dictionary is selected from the observed dataset. Based on this compact dictionary, the relationships in the dynamic signed mOSNs are estimated via solving the formulated problem. Furthermore, the estimation accuracy is improved by employing a dictionary self-updating mechanism.

Myosin-1 inhibition by PClP affects membrane shape, cortical actin distribution and lipid droplet dynamics in early Zebrafish embryos.

Directory of Open Access Journals (Sweden)

Prabuddha Gupta

Full Text Available Myosin-1 (Myo1 represents a mechanical link between the membrane and actin-cytoskeleton in animal cells. We have studied the effect of Myo1 inhibitor PClP in 1-8 cell Zebrafish embryos. Our results indicate a unique involvement of Myo1 in early development of Zebrafish embryos. Inhibition of Myo1 (by PClP and Myo2 (by Blebbistatin lead to arrest in cell division. While Myo1 isoforms appears to be important for both the formation and the maintenance of cleavage furrows, Myo2 is required only for the formation of furrows. We found that the blastodisc of the embryo, which contains a thick actin cortex (~13 μm, is loaded with cortical Myo1. Myo1 appears to be crucial for maintaining the blastodisc morphology and the actin cortex thickness. In addition to cell division and furrow formation, inhibition of Myo1 has a drastic effect on the dynamics and distribution of lipid droplets (LDs in the blastodisc near the cleavage furrow. All these results above are effects of Myo1 inhibition exclusively; Myo2 inhibition by blebbistatin does not show such phenotypes. Therefore, our results demonstrate a potential role for Myo1 in the maintenance and formation of furrow, blastodisc morphology, cell-division and LD organization within the blastodisc during early embryogenesis.

Awareness of Deaf Sign Language and Gang Signs.

Science.gov (United States)

Smith, Cynthia; Morgan, Robert L.

There have been increasing incidents of innocent people who use American Sign Language (ASL) or another form of sign language being victimized by gang violence due to misinterpretation of ASL hand formations. ASL is familiar to learners with a variety of disabilities, particularly those in the deaf community. The problem is that gang members have…

Automatic sign language recognition inspired by human sign perception

NARCIS (Netherlands)

Ten Holt, G.A.

2010-01-01

Automatic sign language recognition is a relatively new field of research (since ca. 1990). Its objectives are to automatically analyze sign language utterances. There are several issues within the research area that merit investigation: how to capture the utterances (cameras, magnetic sensors,

Inuit Sign Language: a contribution to sign language typology

NARCIS (Netherlands)

Schuit, J.; Baker, A.; Pfau, R.

2011-01-01

Sign language typology is a fairly new research field and typological classifications have yet to be established. For spoken languages, these classifications are generally based on typological parameters; it would thus be desirable to establish these for sign languages. In this paper, different

An Unusual Bone Loss Around Implants

Directory of Open Access Journals (Sweden)

Amirreza Rokn

2013-01-01

Full Text Available AbstractPre-implant disease is an inflammatory process, which can affect the surrounding tissues of a functional Osseointegrated implant that is usually as a result of a disequilibrium between the micro-flora and the body defense system.This case reports a 57 years old male with unusual bone loss around dental implants.This was an unusual case of peri-implantitis which occurred only in the implants on one side of the mouth although they all were unloaded implants.

Unusual presentations in patients with E200K familial Creutzfeldt-Jakob disease.

Science.gov (United States)

Cohen, O S; Kimiagar, I; Korczyn, A D; Nitsan, Z; Appel, S; Hoffmann, C; Rosenmann, H; Kahana, E; Chapman, J

2016-05-01

Familial Creutzfeldt-Jakob disease (fCJD) in Jews of Libyan ancestry is caused by an E200K mutation in the PRNP gene. The typical presenting symptoms include cognitive decline, behavioral changes and gait disturbances; however, some patients may have an unusual presentation such as a stroke-like presentation, alien hand syndrome or visual disturbances. The aim of this paper is to describe uncommon presentations in our series of consecutive patients with E200K fCJD. The study group included consecutive fCJD patients followed up as part of a longitudinal prospective study ongoing since 2003 or hospitalized since 2005. The clinical diagnosis of probable CJD was based on accepted diagnostic criteria and supported by typical magnetic resonance imaging, electroencephalographic findings, elevated cerebrospinal fluid tau protein levels and by genetic testing for the E200K mutation. Disease symptoms and signs were retrieved from the medical files. The study population included 77 patients (42 men) with a mean age of disease onset of 60.6 ± 7.2 years. The most prevalent presenting symptoms were cognitive decline followed by gait impairment and behavioral changes. However, six patients had an unusual presentation including auditory agnosia, monoparesis, stroke-like presentation, facial nerve palsy, pseudobulbar syndrome and alien hand syndrome. Our case series illustrates the wide phenotypic variability of the clinical presentation of patients with fCJD and widens the clinical spectrum of the disease. A high level of clinical suspicion may prove useful in obtaining early diagnosis and therefore avoiding costly and inefficient diagnostic and therapeutic strategies. © 2016 EAN.

Unusual presentation of foreign bodies in esophagus-our experience

Directory of Open Access Journals (Sweden)

Neha A Suman

2015-01-01

Full Text Available Foreign body (FB in esophagus is not a very rare entity. The main risks are to the children under 3 years of age. In this age group, the second molars have not yet developed, the child′s grinding and swallowing mechanisms are poor, and glottis closure is immature. Some patients at risk for FB ingestion may not be able to give an accurate medical history of ingestion, either due to age or mental illness. Coins are the most commonly ingested FBs, with button batteries, fish bone, marble, stone, and pieces of meat, etc., being other forms of ingested FB. In the majority of cases, it is accidental in nature, but can be occasionally homicidal, as was probably in one of our patients. Patient can be asymptomatic or can present with dysphagia, drooling of saliva, FB sensation, vomiting or pain. Patients with long-standing esophageal FBs may present with weight loss, aspiration pneumonia, fever, or signs and symptoms of esophageal perforation including crepitus, pneumomediastinum, or gastrointestinal bleeding. Here, we present four case reports of unusual presentation of FB in esophagus that were successfully removed by rigid esophagoscopy without any complication

Toward the Ideal Signing Avatar

Directory of Open Access Journals (Sweden)

Nicoletta Adamo-Villani

2016-06-01

Full Text Available The paper discusses ongoing research on the effects of a signing avatar's modeling/rendering features on the perception of sign language animation. It reports a recent study that aimed to determine whether a character's visual style has an effect on how signing animated characters are perceived by viewers. The stimuli of the study were two polygonal characters presenting two different visual styles: stylized and realistic. Each character signed four sentences. Forty-seven participants with experience in American Sign Language (ASL viewed the animated signing clips in random order via web survey. They (1 identified the signed sentences (if recognizable, (2 rated their legibility, and (3 rated the appeal of the signing avatar. Findings show that while character's visual style does not have an effect on subjects' perceived legibility of the signs and sign recognition, it has an effect on subjects' interest in the character. The stylized signing avatar was perceived as more appealing than the realistic one.

Significance of satellite sign and spot sign in predicting hematoma expansion in spontaneous intracerebral hemorrhage.

Science.gov (United States)

Yu, Zhiyuan; Zheng, Jun; Ali, Hasan; Guo, Rui; Li, Mou; Wang, Xiaoze; Ma, Lu; Li, Hao; You, Chao

2017-11-01

Hematoma expansion is related to poor outcome in spontaneous intracerebral hemorrhage (ICH). Recently, a non-enhanced computed tomography (CT) based finding, termed the 'satellite sign', was reported to be a novel predictor for poor outcome in spontaneous ICH. However, it is still unclear whether the presence of the satellite sign is related to hematoma expansion. Initial computed tomography angiography (CTA) was conducted within 6h after ictus. Satellite sign on non-enhanced CT and spot sign on CTA were detected by two independent reviewers. The sensitivity and specificity of both satellite sign and spot sign were calculated. Receiver-operator analysis was conducted to evaluate their predictive accuracy for hematoma expansion. This study included 153 patients. Satellite sign was detected in 58 (37.91%) patients and spot sign was detected in 38 (24.84%) patients. Among 37 patients with hematoma expansion, 22 (59.46%) had satellite sign and 23 (62.16%) had spot sign. The sensitivity and specificity of satellite sign for prediction of hematoma expansion were 59.46% and 68.97%, respectively. The sensitivity and specificity of spot sign were 62.16% and 87.07%, respectively. The area under the curve (AUC) of satellite sign was 0.642 and the AUC of spot sign was 0.746. (P=0.157) CONCLUSION: Our results suggest that the satellite sign is an independent predictor for hematoma expansion in spontaneous ICH. Although spot sign has the higher predictive accuracy, satellite sign is still an acceptable predictor for hematoma expansion when CTA is unavailable. Copyright © 2017 Elsevier B.V. All rights reserved.

Computational triadic algebras of signs

Energy Technology Data Exchange (ETDEWEB)

Zadrozny, W. [T.J. Watson Research Center, Yorktown Heights, NY (United States)

1996-12-31

We present a finite model of Peirce`s ten classes of signs. We briefly describe Peirce`s taxonomy of signs; we prove that any finite collection of signs can be extended to a finite algebra of signs in which all interpretants are themselves being interpreted; and we argue that Peirce`s ten classes of signs can be defined using constraints on algebras of signs. The paper opens the possibility of defining multimodal cognitive agents using Peirce`s classes of signs, and is a first step towards building a computational logic of signs based on Peirce`s taxonomies.

Gesture, sign, and language: The coming of age of sign language and gesture studies.

Science.gov (United States)

Goldin-Meadow, Susan; Brentari, Diane

2017-01-01

How does sign language compare with gesture, on the one hand, and spoken language on the other? Sign was once viewed as nothing more than a system of pictorial gestures without linguistic structure. More recently, researchers have argued that sign is no different from spoken language, with all of the same linguistic structures. The pendulum is currently swinging back toward the view that sign is gestural, or at least has gestural components. The goal of this review is to elucidate the relationships among sign language, gesture, and spoken language. We do so by taking a close look not only at how sign has been studied over the past 50 years, but also at how the spontaneous gestures that accompany speech have been studied. We conclude that signers gesture just as speakers do. Both produce imagistic gestures along with more categorical signs or words. Because at present it is difficult to tell where sign stops and gesture begins, we suggest that sign should not be compared with speech alone but should be compared with speech-plus-gesture. Although it might be easier (and, in some cases, preferable) to blur the distinction between sign and gesture, we argue that distinguishing between sign (or speech) and gesture is essential to predict certain types of learning and allows us to understand the conditions under which gesture takes on properties of sign, and speech takes on properties of gesture. We end by calling for new technology that may help us better calibrate the borders between sign and gesture.

Unusual Thermal Hall Effect in a Kitaev Spin Liquid Candidate α -RuCl3

Science.gov (United States)

Kasahara, Y.; Sugii, K.; Ohnishi, T.; Shimozawa, M.; Yamashita, M.; Kurita, N.; Tanaka, H.; Nasu, J.; Motome, Y.; Shibauchi, T.; Matsuda, Y.

2018-05-01

The Kitaev quantum spin liquid displays the fractionalization of quantum spins into Majorana fermions. The emergent Majorana edge current is predicted to manifest itself in the form of a finite thermal Hall effect, a feature commonly discussed in topological superconductors. Here we report on thermal Hall conductivity κx y measurements in α -RuCl3 , a candidate Kitaev magnet with the two-dimensional honeycomb lattice. In a spin-liquid (Kitaev paramagnetic) state below the temperature characterized by the Kitaev interaction JK/kB˜80 K , positive κx y develops gradually upon cooling, demonstrating the presence of highly unusual itinerant excitations. Although the zero-temperature property is masked by the magnetic ordering at TN=7 K , the sign, magnitude, and T dependence of κx y/T at intermediate temperatures follows the predicted trend of the itinerant Majorana excitations.

Signs of Life on Venus

Science.gov (United States)

Ksanfomality, L.

2012-04-01

The search for "habitable zones" in extrasolar planetary systems is based on the premise of "normal" physical conditions in a habitable zone, i.e. pressure, temperature range, and atmospheric composition similar to those on the Earth. However, one should not exclude completely the possibility of the existence of life at relatively high temperatures, despite the fact that at the first glance it seems impossible. The planet Venus with its dense, hot (735 K), oxigenless CO2 - atmosphere and high 92 bar-pressure at the surface could be the natural laboratory for the studies of this type. Amid exoplanets, celestial bodies with the physical conditions similar to the Venusian can be met. The only existing data of actual close-in observations of Venus' surface are the results of a series of missions of the soviet VENERA landers which took place the 1970's and 80's in the atmosphere and on the surface of Venus. For 36 and 29 years since these missions, respectively, I repeatedly returned to the obtained images of the Venus' surface in order to reveal on them any unusual objects observed in the real conditions of Venus. The new analysis of the Venus' panoramas was based on the search of unusual elements in two ways. Since the efficiency of the VENERA landers maintained for a long time they produced a large number of primary television panoramas during the lander's work. Thus, one can try to detect: (a) any differences in successive images (appearance or disappearance of parts of the image or change of their shape), and understand what these changes are related to (e.g., wind), and whether they are related to hypothetical habitability of a planet. Another sign (b) of the wanted object is their morphological peculiarities which distinguishes them from the ordinary surface details. The results of VENERA-9 (1975) and VENERA -13 (1982) are of the main interest. A few relatively large objects ranging from a decimeter to half meter and with unusual morphology were observed in some

SIGNS The sandwich sign

African Journals Online (AJOL)

The sandwich sign is demonstrated on cross-sectional imaging, commonly on CT or ultrasound. It refers to homogeneous soft- tissue masses representing mesenteric lymphadenopathy as the two halves of a sandwich bun, encasing the mesenteric fat and tubular mesenteric vessels that constitute the 'sandwich filling' (Figs ...

Signed Language Working Memory Capacity of Signed Language Interpreters and Deaf Signers

Science.gov (United States)

Wang, Jihong; Napier, Jemina

2013-01-01

This study investigated the effects of hearing status and age of signed language acquisition on signed language working memory capacity. Professional Auslan (Australian sign language)/English interpreters (hearing native signers and hearing nonnative signers) and deaf Auslan signers (deaf native signers and deaf nonnative signers) completed an…

Information structure in Russian Sign Language and Sign Language of the Netherlands

NARCIS (Netherlands)

Kimmelman, V.

2014-01-01

This dissertation explores Information Structure in two sign languages: Sign Language of the Netherlands and Russian Sign Language. Based on corpus data and elicitation tasks we show how topic and focus are expressed in these languages. In particular, we show that topics can be marked syntactically

Warning Signs of Bullying

Science.gov (United States)

... of Aggressive Behavior Print Share Warning Signs for Bullying There are many warning signs that may indicate ... Get help right away . Signs a Child is Bullying Others Kids may be bullying others if they: ...

The Danish Sign Language Dictionary

DEFF Research Database (Denmark)

Kristoffersen, Jette Hedegaard; Troelsgård, Thomas

2010-01-01

The entries of the The Danish Sign Language Dictionary have four sections:  Entry header: In this section the sign headword is shown as a photo and a gloss. The first occurring location and handshape of the sign are shown as icons.  Video window: By default the base form of the sign headword...... forms of the sign (only for classifier entries). In addition to this, frequent co-occurrences with the sign are shown in this section. The signs in the The Danish Sign Language Dictionary can be looked up through:  Handshape: Particular handshapes for the active and the passive hand can be specified...... to find signs that are not themselves lemmas in the dictionary, but appear in example sentences.  Topic: Topics can be chosen as search criteria from a list of 70 topics....

Fabrication and durable antibacterial properties of 3D porous wet electrospun RCSC/PCL nanofibrous scaffold with silver nanoparticles

Energy Technology Data Exchange (ETDEWEB)

Zhang, Mei; Lin, Han [Alan G. MacDiarmid Laboratory, College of Chemistry, Jilin University, Changchun 130012 (China); Wang, Yilong [College of Quartermaster Technology, Jilin University, Changchun, 130062 (China); Yang, Guang [Norman Bethune First Hospital, Jilin University, Changchun 130021 (China); Zhao, He [Alan G. MacDiarmid Laboratory, College of Chemistry, Jilin University, Changchun 130012 (China); Sun, Dahui, E-mail: sundahui1971@sina.com [Norman Bethune First Hospital, Jilin University, Changchun 130021 (China)

2017-08-31

Highlights: • Ranachensinensis skin collagen (RCSC) was used with molecular weight 105∼250KDa. • Wet electrospinning was successfully improved and was used to produce 3D porous structure materials with about 90% porosity. • AgNPs was loaded in AgNPs dispersion liquid. - Abstract: Electrospunnanofibers are used as three-dimensional (3D) scaffold materials that can alter cell attachment and cell proliferation, change the antibacterial properties of materials, and can be used as wound dressings. But the fabrication of porous 3D scaffold structure and the antibacterial properties enhancing are challenges remained to improve. With the states here, a Ranachensinensis skin collagen (RCSC)/poly(ε-caprolactone) (PCL)AgNP-loaded3D nanofiber scaffold is fabricated as a wound dressing material by using an improved wet electrospinning method (blending). The nanoscale of the AgNPs is proved. The 3D porous morphologies of the materials with different AgNP loadings, are determined with field emission scanning electron microscopy (FESEM) and the presence and uniformity distribution of AgNPs is confirmed by Energy dispersive X-ray (EDX) spectroscopy. The silver-ion release rates, antibacterial properties, and cytotoxicities of dressing materials with different AgNP contents are evaluated using ICP-AES, the zone inhibition method, and MTT testing. These results showed that the improved wet electrospun is an effective way to fabricate AgNP loaded 3D scaffold materials with porous structure and nearly 90% porosity and the presence of AgNPs in dressing materials strengthen the antibacterial properties. The RCSC/PCL 3D scaffold materials containing 2.0%AgNP would be promising for dressing materials application nearly without cytotoxicities.

Unusual radiological characteristics of teratoid/rhabdoid brain tumor ...

African Journals Online (AJOL)

We report a case of atypical teratoid rhabdoid brain tumor for 4 months old male child, who presented with unusual radiological findings, that can be confused with other brain tumors ,so we high light these unusual imaging features to aid in making correct diagnosis. Keywords: atypical teratoid–rhabdoid tumor, brain tumor, ...

The testis: the unusual, the rare and the bizarre

International Nuclear Information System (INIS)

Stewart, V.R.; Sidhu, P.S.

2007-01-01

Ultrasound is the preferred technique when imaging the scrotal contents. Although appearances of many of the more common abnormalities present the examiner with no diagnostic difficulty, the more unusual conditions may present a considerable challenge. Many normal variants, unusual and rare abnormalities may be instantly recognized once seen. The current review highlights the more unusual and rare conditions affecting the scrotal contents in order to allow the reader the opportunity to gain knowledge of their existence and to aid future interpretation of the difficult examination

48 CFR 235.070 - Indemnification against unusually hazardous risks.

Science.gov (United States)

2010-10-01

... 48 Federal Acquisition Regulations System 3 2010-10-01 2010-10-01 false Indemnification against unusually hazardous risks. 235.070 Section 235.070 Federal Acquisition Regulations System DEFENSE... DEVELOPMENT CONTRACTING 235.070 Indemnification against unusually hazardous risks. ...

The Phonetics of Head and Body Movement in the Realization of American Sign Language Signs.

Science.gov (United States)

Tyrone, Martha E; Mauk, Claude E

2016-01-01

Because the primary articulators for sign languages are the hands, sign phonology and phonetics have focused mainly on them and treated other articulators as passive targets. However, there is abundant research on the role of nonmanual articulators in sign language grammar and prosody. The current study examines how hand and head/body movements are coordinated to realize phonetic targets. Kinematic data were collected from 5 deaf American Sign Language (ASL) signers to allow the analysis of movements of the hands, head and body during signing. In particular, we examine how the chin, forehead and torso move during the production of ASL signs at those three phonological locations. Our findings suggest that for signs with a lexical movement toward the head, the forehead and chin move to facilitate convergence with the hand. By comparison, the torso does not move to facilitate convergence with the hand for signs located at the torso. These results imply that the nonmanual articulators serve a phonetic as well as a grammatical or prosodic role in sign languages. Future models of sign phonetics and phonology should take into consideration the movements of the nonmanual articulators in the realization of signs. © 2016 S. Karger AG, Basel.

Unusual computed tomography findings and complications in acute appendicitis

International Nuclear Information System (INIS)

Palacio, Glaucia Andrade e Silva; D'Ippolito, Giuseppe

2003-01-01

The objective of this article is to describe and illustrate unusual computed tomography (CT) findings in patients with acute appendicitis. We reviewed the charts of 200 patients with clinical suspicion of acute appendicitis who were submitted to abdominal CT before surgery. Patients with unusual presentation or complications were selected for illustrating the main CT findings. Unusual complications of acute appendicitis were related to anomalous position of the appendix, contiguity to intraperitoneal organs such as the liver, gall bladder, annexes and the bladder and continuous use of anti inflammatory or antibiotics during the diagnostic process. We concluded that CT is a useful diagnostic tool in patients with complicated or unusual presentation acute appendicitis. The first step towards diagnosis in these cases i to have in mind the hypothesis of appendicitis in patients with acute abdominal pain. (author)

New radiation warning sign

International Nuclear Information System (INIS)

Mac Kenzie, C.; Mason, C.

2006-01-01

Full text: Radiation accidents involving orphan radioactive sources have happened as a result of people not recognizing the radiation trefoil symbol or from being illiterate and not understanding a warning statement on the radiation source. The trefoil symbol has no inherent meaning to people that have not been instructed in its use. A new radiation warning sign, to supplement the existing trefoil symbol, has been developed to address these issues. Human Factors experts, United Nations member states, and members of the international community of radiation protection professionals were consulted for input on the design of a new radiation warning sign that would clearly convey the message of 'Danger- Run Away- Stay Away' when in close proximity to a dangerous source of radiation. Cultural differences of perception on various warning symbols were taken into consideration and arrays of possible signs were developed. The signs were initially tested in international children for identification with the desired message and response. Based on these test results and further input from radiation protection professionals, five warning signs were identified as the most successful in conveying the desired message and response. These five signs were tested internationally in eleven countries by a professional survey company to determine the best sign for this purpose. The conclusion of the international testing is presented. The new radiation warning sign is currently a draft ISO standard under committee review. The design of the propose d radiation warning sign and the proposed implementation strategy outlined in the draft ISO standard is presented. (authors)

Green's Theorem for Sign Data

OpenAIRE

Houston, Louis M.

2012-01-01

Sign data are the signs of signal added to noise. It is well known that a constant signal can be recovered from sign data. In this paper, we show that an integral over variant signal can be recovered from an integral over sign data based on the variant signal. We refer to this as a generalized sign data average. We use this result to derive a Green's theorem for sign data. Green's theorem is important to various seismic processing methods, including seismic migration. Results in this paper ge...

Signed languages and globalization

NARCIS (Netherlands)

Hiddinga, A.; Crasborn, O.

2011-01-01

Deaf people who form part of a Deaf community communicate using a shared sign language. When meeting people from another language community, they can fall back on a flexible and highly context-dependent form of communication called international sign, in which shared elements from their own sign

Unusual idiopathic normal pressure hydrocephalus patient with marked asymmetric and upper body parkinsonism

Directory of Open Access Journals (Sweden)

Kyunghun Kang

2016-01-01

Full Text Available Asymmetry of parkinsonian symptoms is strong evidence toward the diagnosis of Parkinson's disease (PD. Lower body parkinsonism is characteristic in idiopathic normal pressure hydrocephalus (INPH. We report an unusual INPH patient with marked asymmetric and upper body parkinsonism. An 83-year-old man presented with gait impairment and asymmetric clumsiness of movement. According to the Unified Parkinson's Disease Rating Scale (UPDRS, the motor subscore was 12 in the left limb and 8 in the right. The score was 14 for both the upper and lower body. After the cerebrospinal fluid tap test (CSFTT, he showed marked improvement in the upper body score. A loss of asymmetry of parkinsonian signs, with greater improvement in the left limb, was presented. Fluorinated N-3-fluoropropyl-2β-carbomethoxy-3β-(4-iodophenyl-nortropane (F-18 FP-CIT positron emission tomography (PET imaging was normal. In the differential diagnosis of elderly patients presenting with parkinsonism compatible with PD, we might need to consider a diagnosis of INPH.

On the temporal dynamics of sign production: An ERP study in Catalan Sign Language (LSC).

Science.gov (United States)

Baus, Cristina; Costa, Albert

2015-06-03

This study investigates the temporal dynamics of sign production and how particular aspects of the signed modality influence the early stages of lexical access. To that end, we explored the electrophysiological correlates associated to sign frequency and iconicity in a picture signing task in a group of bimodal bilinguals. Moreover, a subset of the same participants was tested in the same task but naming the pictures instead. Our results revealed that both frequency and iconicity influenced lexical access in sign production. At the ERP level, iconicity effects originated very early in the course of signing (while absent in the spoken modality), suggesting a stronger activation of the semantic properties for iconic signs. Moreover, frequency effects were modulated by iconicity, suggesting that lexical access in signed language is determined by the iconic properties of the signs. These results support the idea that lexical access is sensitive to the same phenomena in word and sign production, but its time-course is modulated by particular aspects of the modality in which a lexical item will be finally articulated. Copyright © 2015 Elsevier B.V. All rights reserved.

Autocorrelation descriptor improvements for QSAR: 2DA_Sign and 3DA_Sign

Science.gov (United States)

Sliwoski, Gregory; Mendenhall, Jeffrey; Meiler, Jens

2016-03-01

Quantitative structure-activity relationship (QSAR) is a branch of computer aided drug discovery that relates chemical structures to biological activity. Two well established and related QSAR descriptors are two- and three-dimensional autocorrelation (2DA and 3DA). These descriptors encode the relative position of atoms or atom properties by calculating the separation between atom pairs in terms of number of bonds (2DA) or Euclidean distance (3DA). The sums of all values computed for a given small molecule are collected in a histogram. Atom properties can be added with a coefficient that is the product of atom properties for each pair. This procedure can lead to information loss when signed atom properties are considered such as partial charge. For example, the product of two positive charges is indistinguishable from the product of two equivalent negative charges. In this paper, we present variations of 2DA and 3DA called 2DA_Sign and 3DA_Sign that avoid information loss by splitting unique sign pairs into individual histograms. We evaluate these variations with models trained on nine datasets spanning a range of drug target classes. Both 2DA_Sign and 3DA_Sign significantly increase model performance across all datasets when compared with traditional 2DA and 3DA. Lastly, we find that limiting 3DA_Sign to maximum atom pair distances of 6 Å instead of 12 Å further increases model performance, suggesting that conformational flexibility may hinder performance with longer 3DA descriptors. Consistent with this finding, limiting the number of bonds in 2DA_Sign from 11 to 5 fails to improve performance.

What limits production of unusual monoenoic fatty acids in transgenic plants?

Science.gov (United States)

Suh, Mi Chung; Schultz, David J; Ohlrogge, John B

2002-08-01

Unusual monounsaturated fatty acids are major constituents (greater than 80%) in seeds of Coriandrum sativum L. (coriander) and Thunbergia alata Bojer, as well as in glandular trichomes (greater than 80% derived products) of Pelargonium x hortorum (geranium). These diverged fatty acid structures are produced via distinct plastidial acyl-acyl carrier protein (ACP) desaturases. When expressed in Arabidopsis thaliana (L.) Heynh. under strong seed-specific promoters the unusual acyl-ACP desaturases resulted in accumulation of unusual monoene fatty acids at 1-15% of seed fatty acid mass. In this study, we have examined several factors that potentially limit higher production of unusual monoenes in transgenic oilseeds. (i) Immunoblots indicated that the introduced desaturases were expressed at levels equivalent to or higher than the endogenous delta9 18:0-ACP desaturase. However, the level of unusual fatty acid produced in transgenic plants was not correlated with the level of desaturase expression. (ii) The unusual desaturases were expressed in several backgrounds, including antisense 18:0-ACP desaturase plants, in fab1 mutants, and co-expressed with specialized ACP or ferredoxin isoforms. None of these experiments led to high production of expected products. (iii) No evidence was found for degradation of the unusual fatty acids during seed development. (iv) Petroselinic acid added to developing seeds was incorporated into triacylglycerol as readily as oleic acid, suggesting no major barriers to its metabolism by enzymes of glycerolipid assembly. (v) In vitro and in situ assay of acyl-ACP desaturases revealed a large discrepancy of activity when comparing unusual acyl-ACP desaturases with the endogenous delta9 18:0-ACP desaturase. The combined results, coupled with the sensitivity of acyl-ACP desaturase activity to centrifugation and low salt or detergent suggests low production of unusual monoenes in transgenic plants may be due to the lack of, or incorrect assemble of

Unusual dengue virus 3 epidemic in Nicaragua, 2009.

Directory of Open Access Journals (Sweden)

Gamaliel Gutierrez

2011-11-01

Full Text Available The four dengue virus serotypes (DENV1-4 cause the most prevalent mosquito-borne viral disease affecting humans worldwide. In 2009, Nicaragua experienced the largest dengue epidemic in over a decade, marked by unusual clinical presentation, as observed in two prospective studies of pediatric dengue in Managua. From August 2009-January 2010, 212 dengue cases were confirmed among 396 study participants at the National Pediatric Reference Hospital. In our parallel community-based cohort study, 170 dengue cases were recorded in 2009-10, compared to 13-65 cases in 2004-9. In both studies, significantly more patients experienced "compensated shock" (poor capillary refill plus cold extremities, tachycardia, tachypnea, and/or weak pulse in 2009-10 than in previous years (42.5% [90/212] vs. 24.7% [82/332] in the hospital study (p<0.001 and 17% [29/170] vs. 2.2% [4/181] in the cohort study (p<0.001. Signs of poor peripheral perfusion presented significantly earlier (1-2 days in 2009-10 than in previous years according to Kaplan-Meier survival analysis. In the hospital study, 19.8% of subjects were transferred to intensive care, compared to 7.1% in previous years - similar to the cohort study. DENV-3 predominated in 2008-9, 2009-10, and 2010-11, and full-length sequencing revealed no major genetic changes from 2008-9 to 2010-11. In 2008-9 and 2010-11, typical dengue was observed; only in 2009-10 was unusual presentation noted. Multivariate analysis revealed only "2009-10" as a significant risk factor for Dengue Fever with Compensated Shock. Interestingly, circulation of pandemic influenza A-H1N1 2009 in Managua was shifted such that it overlapped with the dengue epidemic. We hypothesize that prior influenza A H1N1 2009 infection may have modulated subsequent DENV infection, and initial results of an ongoing study suggest increased risk of shock among children with anti-H1N1-2009 antibodies. This study demonstrates that parameters other than serotype, viral

British Sign Name Customs

Science.gov (United States)

Day, Linda; Sutton-Spence, Rachel

2010-01-01

Research presented here describes the sign names and the customs of name allocation within the British Deaf community. While some aspects of British Sign Language sign names and British Deaf naming customs differ from those in most Western societies, there are many similarities. There are also similarities with other societies outside the more…

Negation switching invariant signed graphs

Directory of Open Access Journals (Sweden)

Deepa Sinha

2014-04-01

Full Text Available A signed graph (or, $sigraph$ in short is a graph G in which each edge x carries a value $\\sigma(x \\in \\{-, +\\}$ called its sign. Given a sigraph S, the negation $\\eta(S$ of the sigraph S is a sigraph obtained from S by reversing the sign of every edge of S. Two sigraphs $S_{1}$ and $S_{2}$ on the same underlying graph are switching equivalent if it is possible to assign signs `+' (`plus' or `-' (`minus' to vertices of $S_{1}$ such that by reversing the sign of each of its edges that has received opposite signs at its ends, one obtains $S_{2}$. In this paper, we characterize sigraphs which are negation switching invariant and also see for what sigraphs, S and $\\eta (S$ are signed isomorphic.

Cleft lip and palate: series of unusual clinical cases.

Science.gov (United States)

Paranaíba, Lívia Máris Ribeiro; Miranda, Roseli Teixeira de; Martelli, Daniella Reis Barbosa; Bonan, Paulo Rogério Ferreti; Almeida, Hudson de; Orsi Júnior, Julian Miranda; Martelli Júnior, Hercílio

2010-01-01

Cleft lip and/or palate (CL/P) represent the most common congenital anomalies of the face, corresponding to approximately 65% of all malformations of the craniofacial region. to describe unusual clinical cases of non-syndromic CL/P (CL/PNS), diagnosed in a reference service in Minas Gerais, Brazil, and correlate these alterations with possible risk factors. we carried out a retrospective study, between the years of 1992 and the 1st half of 2009, from medical records. Among the 778 cases of CL/PNS diagnosed in the period of 17 years, 5 (0.64%) were unusual CL/PNS, and all patients were male. It was found that among the 5 patients, 2 had incomplete right cleft lip with incomplete cleft palate, 2 were affected by left incomplete cleft lip and incomplete cleft palate, and 1 had a cleft lip and palate associated with complete right cleft palate. Risk factors such as consanguinity, maternal smoking and alcohol consumption, medication usage during pregnancy, history of abortion and/or stillbirths and maternal diseases were not associated with unusual CL/PNS. This study described 5 unusual cases of CL/PNS in a Brazilian population; no associations with the risk factors analyzed were seen. It also confirmed the unusualness of the prevalence of such alterations.

Signs of political economy

Directory of Open Access Journals (Sweden)

Bernard Lamizet

2015-12-01

Full Text Available Like any political system, economy is a system of signs and representations. The Semiotics of economy elaborates its analytical methods to interpret such signs, which give meaning to the economy by representing its performances in public debate and in the media. Four major features distinguish the Semiotics of political economy from other semiotic forms or other systems of information and political representation. First of all, the relationship between the signification of the economy and the real or the imaginary phenomena to which they refer always pertains to the order of values. The second characteristic of economic signs is the significance of the state of lack they express. The third characteristic of signs of the economy is the form of sign production, which can be designated by the concept of emission of signs and their diffusion. Finally, as all signs, the economic sign is arbitrary. In the field of Economics, such arbitrariness does not imply that the Subject is free to superimpose whatever value to the signs themselves, but refers to the rupture between the world and its possible transformation. The very meaning of the word economy is here at stake. Oikos, in Greek (the term from which the word economy is derived refers to a known, familiar space. Economy transforms the real, natural world into a symbolic social world, into a world of relations with others whom we recognise and whose actions are relatively predictable. It might be useful to consider the contemporary issue of debt, its implications and its multiple meanings, which includes both the ethical and moral dimension of the condemnation of debt as well as the imaginary political dimension based on the expression of an idea of independence.

Bilayer porous scaffold based on poly-({epsilon}-caprolactone) nanofibrous membrane and gelatin sponge for favoring cell proliferation

Energy Technology Data Exchange (ETDEWEB)

Zhou Zhihua; Zhou Yang [Department of Chemistry, Nanchang University, 999 Xuefu Avenue, Nanchang 330031 (China); Chen Yiwang, E-mail: ywchen@ncu.edu.cn [Department of Chemistry, Nanchang University, 999 Xuefu Avenue, Nanchang 330031 (China); Institute of Polymers, Nanchang University, 999 Xuefu Avenue, Nanchang 330031 (China); Nie Huarong, E-mail: niehr@iccas.ac.cn [Institute of Polymers, Nanchang University, 999 Xuefu Avenue, Nanchang 330031 (China); Wang Yang [First Affiliated Hospital, Nanchang University, 17 Yongwaizheng Road, Nanchang 330006 (China); Li Fan; Zheng Yan [Institute of Polymers, Nanchang University, 999 Xuefu Avenue, Nanchang 330031 (China)

2011-12-15

Electrospun poly-({epsilon}-caprolactone) (PCL) nanofibers has been widely used in the medical prosthesis. However, poor hydrophilicity and the lack of natural recognition sites for covalent cell-recognition signal molecules to promote cell attachment have limited its utility as tissue scaffolds. In this study, Bilayer porous scaffolds based on PCL electrospun membranes and gelatin (GE) sponges were fabricated through soft hydrolysis of PCL electrospun followed by grafting gelatin onto the fiber surface, through crosslinking and freeze drying treatment of additional gelatin coat and grafted gelatin surface. GE sponges were stably anchored on PCL membrane surface with the aid of grafted GE molecules. The morphologies of bilayer porous scaffolds were observed through SEM. The contact angle of the scaffolds was 0 Degree-Sign , the mechanical properties of scaffolds were measured by tensile test, Young's moduli of PCL scaffolds before and after hydrolysis are 66-77.3 MPa and 62.3-75.4 MPa, respectively. Thus, the bilayer porous scaffolds showed excellent hydrophilic surface and desirable mechanical strength due to the soft hydrolysis and GE coat. The cell culture results showed that the adipose derived mesenchymal stem cells did more favor to adhere and grow on the bilayer porous scaffolds than on PCL electrospun membranes. The better cell affinity of the final bilayer scaffolds not only attributed to the surface chemistry but also the introduction of bilayer porous structure.

Planning Sign Languages: Promoting Hearing Hegemony? Conceptualizing Sign Language Standardization

Science.gov (United States)

Eichmann, Hanna

2009-01-01

In light of the absence of a codified standard variety in British Sign Language and German Sign Language ("Deutsche Gebardensprache") there have been repeated calls for the standardization of both languages primarily from outside the Deaf community. The paper is based on a recent grounded theory study which explored perspectives on sign…

Signs of the arctic: Typological aspects of Inuit Sign Language

NARCIS (Netherlands)

Schuit, J.M.

2014-01-01

In this thesis, the native sign language used by deaf Inuit people is described. Inuit Sign Language (IUR) is used by less than 40 people as their sole means of communication, and is therefore highly endangered. Apart from the description of IUR as such, an additional goal is to contribute to the

Unusual MRI findings in grey matter heteropia

International Nuclear Information System (INIS)

Soto Ares, G.; Hamon-Kerautret, M.; Leclerc, X.; Pruvo, J.P.; Houlette, C.; Godefroy, O.

1998-01-01

We report unusual MRI patterns in patients with grey matter heterotopia. Standard T1- and T2-weighted spin-echo and inversion-recovery sequences were used in 22 patients presenting with seizures or developmental delay. The images were reviewed for signal change surrounding white matter and for atypical size, morphology or topography. We found 10 cases of subependymal heterotopias 11 of focal subcortical heterotopia and of diffuse subcortical heterotopia. On clinical or MRI grounds, 8 cases were considered unusual: 2 of the subependymal type, 2 of focal subcortical heterotopia with white matter abnormalities, 2 of focal subcortical heterotopia with no clinicoradiological correlation 1 of extensive hemispheric subcortical heterotopia and 1 of diffuse subcortical heterotopia confined to the frontal lobe. The classical classification of heterotopia enables easy radiological diagnosis even in cases with unusual patterns. In some cases, heterogeneity and high signal in surrounding white matter can be found. Cortical dysplasia is the most frequent associated malformation. (orig.)

An unusual recurrence of pruritic creeping eruption after treatment

African Journals Online (AJOL)

abp

2015-08-13

Aug 13, 2015 ... However, an unusual recurrence of the disease in a Ghanaian male after standard treatment was observed ... dog or cat hookworm is not an unusual disease. However ... mistaken for fungal infections or inflammatory skin disorders. Indeed .... drug include dizziness, nausea, vomiting and intestinal cramps.

Unusual anatomy of maxillary central incisor with two roots

Directory of Open Access Journals (Sweden)

T S Ashwini Shivakumar

2012-01-01

Full Text Available Introduction: Knowledge of root canal morphology is essential for successful endodontic therapy. Failure to recognize unusual root canal anatomy may lead to unsuccessful endodontic treatment. Case Report: This case report describes the successful endodontic treatment of the maxillary central incisor with unusual anatomy of two roots and two root canals. A 23-year-old male patient was referred for dental consultation with discoloration of the maxillary right central incisor with periapical lesion, which revealed unusual anatomy of root on radiographic examination, and was confirmed upon exploration. Discussion: As described by Vertucci, the maxillary central incisor presents a single root and single root canal in 100% of the cases. However, few cases of maxillary central incisors with two canals were reported in the literature, most of which were associated with developmental anomalies like fusion, germination or dens invaginatus. Clinician should be aware of the unusual anatomical variations that should be detected by the different diagnostic resources available.

Ranks of dense alternating sign matrices and their sign patterns

Czech Academy of Sciences Publication Activity Database

Fiedler, Miroslav; Gao, W.; Hall, F.J.; Jing, G.; Li, Z.; Stroev, M.

2015-01-01

Roč. 471, April (2015), s. 109-121 ISSN 0024-3795 R&D Projects: GA ČR(CZ) GA14-07880S Institutional support: RVO:67985840 Keywords : alternating sign matrix * dense matrix * sign pattern matrix Subject RIV: BA - General Mathematics Impact factor: 0.965, year: 2015 http://www.sciencedirect.com/science/article/pii/S0024379515000257

Sociolinguistic Variation and Change in British Sign Language Number Signs: Evidence of Leveling?

Science.gov (United States)

Stamp, Rose; Schembri, Adam; Fenlon, Jordan; Rentelis, Ramas

2015-01-01

This article presents findings from the first major study to investigate lexical variation and change in British Sign Language (BSL) number signs. As part of the BSL Corpus Project, number sign variants were elicited from 249 deaf signers from eight sites throughout the UK. Age, school location, and language background were found to be significant…

Adolf Kussmaul and Kussmaul's sign

Directory of Open Access Journals (Sweden)

Navreet Singh

2015-01-01

Full Text Available Kussmaul's has provided us with three important signs: Pulses paradoxus, Kussmaul's sign and Kussmaul Breathing. This article discusses Kussmaul's sign, its discovery, first description, pathophyiology and exceptions.

An Unusual Case Report of Bertolotti's Syndrome: Extraforaminal Stenosis and L5 Unilateral Root Compression (Castellvi Type III an LSTV).

Science.gov (United States)

Kapetanakis, Stylianos; Chaniotakis, Constantinos; Paraskevopoulos, Constantinos; Pavlidis, Pavlos

2017-01-01

Castellvi Type III lumbosacral transitional vertebrae (LSTV) is an unusual case of Bertolotti's syndrome (BS) due to extraforaminal stenosis, especially manifesting in elderly patients. We report a case of BS in a 62 years old Greek female. The signs of the clinical examination are low back pain, sciatica, hypoesthesia, and pain to the contribution of L5 nerve. Imaging techniques revealed an LSTV Type III a (complete sacralization between LSTV and sacrum). Despite the fact that LSTV is a congenital lesion, the clinical manifestation of BS may present in the elderly population. The accumulative effect of the gradual degeneration of intervertebral foramen (stenosis) may lead to the compression of extraforaminal portion of the nerve root.

DIFFERENCES BETWEEN AMERICAN SIGN LANGUAGE (ASL AND BRITISH SIGN LANGUAGE (BSL

Directory of Open Access Journals (Sweden)

Zora JACHOVA

2008-06-01

Full Text Available In the communication of deaf people between them­selves and hearing people there are three ba­sic as­pects of interaction: gesture, finger signs and writing. The gesture is a conditionally agreed manner of communication with the help of the hands followed by face and body mimic. The ges­ture and the move­ments pre-exist the speech and they had the purpose to mark something, and later to emphasize the speech expression.Stokoe was the first linguist that realised that the signs are not a whole that can not be analysed. He analysed signs in insignificant parts that he called “chemeres”, and many linguists today call them pho­nemes. He created three main phoneme catego­ries: hand position, location and movement.Sign languages as spoken languages have back­ground from the distant past. They developed par­allel with the development of spoken language and undertook many historical changes. Therefore, to­day they do not represent a replacement of the spoken language, but are languages themselves in the real sense of the word.Although the structures of the English language used in USA and in Great Britain is the same, still their sign languages-ASL and BSL are different.

Oat cell carcinoma of the esophagus: Unusual radiological appearances

Energy Technology Data Exchange (ETDEWEB)

Bedi, D.G.; Shaw, M.T.

1986-08-01

Primary oat cell carcinoma of the esophagus is a very rare tumour. The radiographic appearance of the three cases described in this paper are unusual because they resemble benign lesions such as leiomyoma, fibrous polyp and candidiasis. It would be interesting to investigate whether such an unusual appearance is common for this neoplasm.

An unusual oral habit presenting as Dentin Hypersensitivity | Afolabi ...

African Journals Online (AJOL)

We present the case of a 30-year-old man with an unusual oral habit- office pin chewing and filing of the front tooth which resulted in dentine hypersensitivity. Clinical relevance: The role of daily oral habits and techniques of cessation were suggested in the management of dentine hypersensitivity. Keywords: Unusual oral ...

Signs in neuroradiology - part 1

Energy Technology Data Exchange (ETDEWEB)

Goncalves, Fabricio Guimaraes, E-mail: goncalves.neuroradio@gmail.co [McGill University Health Centre (MUHC), Montreal, Quebec (Canada). Montreal General Hospital; Barra, Filipe Ramos; Jovem, Cassio Lemos [Hospital Universitario de Brasilia, DF (Brazil). Dept. of Radiology and Imaging Diagnosis; Matos, Valter de Lima [Hospital Santa Luzia, Brasilia, DF (Brazil); Amaral, Lazaro Luis Faria do [MedImagem - Hospital da Beneficencia Portuguesa de Sao Paulo, SP (Brazil). Dept. of Neuroradiology; Carpio-O' Donovan, Raquel del [McGill University Health Centre (MUHC), Montreal, Quebec (Canada)

2011-03-15

The use of signs or analogies for interpretation and description of medical images is an old and common practice among radiologists. Comparison of findings with animals, food or objects is not unprecedented and routinely performed. Many signs are quite specific and, in some cases, pathognomonic. Indeed, notwithstanding their degree of specificity, signs may help in the characterization of certain diseases. Several neuroradiological signs have been already described. The authors will present 15 neuroradiology signs in the present essay, approaching their main characteristics, the significance of their role in the clinical practice, as well as their respective imaging findings. (author)

Signs in neuroradiology - part 1

International Nuclear Information System (INIS)

Goncalves, Fabricio Guimaraes; Amaral, Lazaro Luis Faria do

2011-01-01

The use of signs or analogies for interpretation and description of medical images is an old and common practice among radiologists. Comparison of findings with animals, food or objects is not unprecedented and routinely performed. Many signs are quite specific and, in some cases, pathognomonic. Indeed, notwithstanding their degree of specificity, signs may help in the characterization of certain diseases. Several neuroradiological signs have been already described. The authors will present 15 neuroradiology signs in the present essay, approaching their main characteristics, the significance of their role in the clinical practice, as well as their respective imaging findings. (author)

Aggressive Adenoid Cystic Carcinoma With Asymptomatic Spinal Cord Compression Revealed By A “Curtain Sign”

Directory of Open Access Journals (Sweden)

Martin Housset

2008-08-01

Full Text Available The author presents a case with an unusually aggressive evolution of an adenoid cystic carcinoma of the head and neck. The patient presented with sciatica one year after initial diagnosis. She was otherwise asymptomatic. Complete work-up for bone involvement, included bone scan and MRI. The patient had asymptomatic thoracic (T5 vertebral metastasis revealed by a typical curtain sign on MRI. She benefited from radiotherapy and did not develop respiratory distress, paraplegia or pain but died of other metastases.

Kinematic and kinetic analysis of the knee joint before and after a PCL retaining total knee replacement during gait and single step ascent.

Science.gov (United States)

Apostolopoulos, Alexandros; Lallos, Stergios; Mastrokalos, Dimitrios; Michos, Ioannis; Darras, Nikolaos; Tzomaki, Magda; Efstathopoulos, Nikolaos

2011-01-01

The objective of this study was to capture and analyze the kinetics and kinematics and determine the functional performance of the osteoarthritic knee after a posterior cruciate ligament (PCL) retaining total knee arthroplasty. Kinematic and kinetic gait analysis of level walking was performed in 20 subjects (12 female and 8 male) with knee ostoarthritis. These patients were free of any neurological diseases that could affect their normal gait. Mean age was 69.6 ± 6.6 years; mean height was 157.6 cm ± 7.6 cm; and mean weight was 77.2 ± 12.1 kg. Full body gait analyses were performed using the BIOKIN 3D motion analysis system before and 9 months after total knee arthroplasty procedures. Single-step ascending kinetic analyses and plantar pressure distribution analyses were also performed for all subjects. International Knee Society Scores (IKSSs) were also assessed pre- and postoperatively. Significant increases were noted postoperatively in average cadence (preoperative mean = 99.26, postoperative mean = 110.5; p knee adduction moment were also reported postoperatively. All patients showed a significant improvement of knee kinetics and kinematics after a PCL retaining total knee arthroplasty. Significant differences were found in the cadence, step length, stride length, and walk velocity postoperatively. IKSSs also significantly improved. Further research is warranted to determine the clinical relevance of these findings.

Silver nanoparticles immobilized onto polycaprolactone (PCL)/poly[2-(dimethylamino)ethyl metacrilate) nanofiber meshes; Imobilizacao de nanoparticulas de prata em malhas de nanofibras de poli(caprolactona)/poli[(2-dimetilamino)etil metacrilato

Energy Technology Data Exchange (ETDEWEB)

Santos, Fernanda G.; Bonkovoski, Leticia C.; Witt, Maria A.; Rubira, Adley F.; Muniz, Edvani C. [Universidade Estadual de Maringa (GMPC/UEM), Maringa, PR (Brazil). Grupo de Materiais Polimericos e Compositos; Piai, Juliana F., E-mail: jupiai@yahoo.com.br [Universidade Estadual de Maringa (UEM), Umuarama, PR (Brazil)

2015-07-01

The present work comprises the fabrication of nanofiber meshes of polycaprolactone (PCL)/poly [(2-dimethylamino) ethyl methacrylate] (PDMAEMA) and the subsequent immobilization of silver nanoparticles, in order to obtain materials with potential application in tissue engineering. The nanofibers composed of different ratios of PDMAEMA / PCL (m/m) were obtained by electrospinning. These nanofiber meshes were then immersed in colloidal suspensions containing the AgNPs under different pH values to immobilize the nanoparticles onto the fiber's surface. A greater amount of AgNPs was deposited when the fibers were immersed in a solution of pH 5, as one can observe from the scanning electron microscopy (SEM) images and the X-ray spectroscopy (EDS) spectra. It was observed that the meshes of the blends suffered morphological changes after immersion in acid solution (pH 5), and, the deposition of AgNPs onto the meshes in general was more effective in acid environment (pH 5). (author)

Oat cell carcinoma of the esophagus: Unusual radiological appearances

International Nuclear Information System (INIS)

Bedi, D.G.; Shaw, M.T.

1986-01-01

Primary oat cell carcinoma of the esophagus is a very rare tumour. The radiographic appearance of the three cases described in this paper are unusual because they resemble benign lesions such as leiomyoma, fibrous polyp and candidiasis. It would be interesting to investigate whether such an unusual appearance is common for this neoplasm. (orig.)

UNUSUAL MANIFESTATION OF NEUROBORELIOSIS (CASE REPORT).

Science.gov (United States)

Beridze, M; Khizanishvili, N; Mdivani, M; Samushia, O; Gogokhia, N

2017-03-01

The paper reported the verified case of neuroboreliosis with unusual clinical presentation of Parkinsonism. Study aimed at establishing the significance of a precise differential diagnosis with substantial analysis of the symptoms of several diseases to avoid the false diagnosis and to conduct the opportune and adequate therapeutic management. We described the case of the diagnosed neuroboreliosis with clinical expression of Multiple Sclerosis (MS) and Parkinsonism. A 44 years old man was diagnosed as MS according to the McDonald's Criteria, who within two years developed typical clinical signs of Parkinsonism. Patient investigated neurologically, Brain contrast MRI (1.5 Tesla) was performed; Cerebrospinal fluid was researched for oligoclonal bands. Blood IgM and IgG were researched against Chlamidia pneumonie, Micoplasma pneumonie, Borrelia Burgdorferi, Herpes simplex 1/2, Cytomegalovirus by ELISA method. Clinically the patient expressed amimic face, oligobradikinesia, extrapiramidal rigidity in all limbs, resting tremor in upper limb fingers, horizontal nystagmus. Brain MRI showed multiple gadolinium enhanced demyelization lesions in periventricular and sub-cortical white matter. CSF oligoclonal bands were positive without dysfunction of blood-brain barrier. Blood IgM, IgG detected to be negative against Chlamidia pneumonie, Micoplasma pneumonie, cytomegalovirus, Herpes simplex ½, while the blood IgG was strongly positive against Borrelia burgdorferi, confirmed by followed Western blot test. Patient was stabilized by puls-therapy with 1 gr/intravenous Solumedrol (5 days) along with Rocephin treatment (2 gr /iv) for 21 days followed by long term treatment with Antiparkin (Carbidopa 250 mg, Levodopa 25 mg). MS and even Parkinsonism in suspicious cases should thoroughly be investigated for differentiation from chronic Neuroboreliosis.

Fabrication and characterization of SrAl{sub 2}O{sub 4}: Eu{sup 2+} Dy{sup 3+}/CS-PCL electrospun nanocomposite scaffold for retinal tissue regeneration

Energy Technology Data Exchange (ETDEWEB)

Sepahvandi, Azadeh; Eskandari, Mahnaz, E-mail: eskandarim@aut.ac.ir; Moztarzadeh, Fathollah

2016-09-01

Millions of people around the world become blind due to losing a part of the retina cells. In tissue engineering field one way to address this issue is to develop a retina tissue by scaffolds based on structure and signals received These scaffolds can play an essential role in repair and reformation of the damaged retina tissue. Here, SrAl{sub 2}O{sub 4}: Eu{sup 2+}, Dy{sup 3+} nanophosphor were prepared by sol-gel method and then coated with PEG to become biocompatible. Next 10%, 30% and 50% concentration of the coated nanophosphors were dispersed in CS-PCL copolymer and electrospuned to form SrAl{sub 2}O{sub 4}: Eu{sup 2+}, Dy{sup 3+}/CS-PCL scaffolds. The aforementioned photo –luminescence-scaffolds were studied for their optical, mechanical and morphological characteristics finally the effect of these scaffolds on the mice RPCs cells' proliferation and differentiation was observed. The 30% nanophosphor dispersion scaffold while providing adequate mechanical flexibility and integrity, and exhibiting superior proliferation rates and acceptable differentiation into retinal neural cells (particularly photo receptors retinal) is suggested as a promising choice in retinal tissue repair. - Highlights: • The 30% nanophosphor dispersion scaffold for both shorter wavelength and middle intense emission is more near to biocompatible nanophosphors. • 30% dispersed nanophosphor scaffold displays satisfactory mechanical strength and flexibility where its behavior is similar to the retina tissue. • Besides as the most effective signal in this study is the electromagnetic signals emitted by nanophosphors, we attribute the enhanced proliferation to the positive effects of the later, the emitted signals of scaffolds. • The tendency towards spherical morphology implies that emitting light may stimulate the cell signaling toward differentiation • These findings implies that mRPC grown on SrAl{sub 2}O{sub 4}: Eu{sup 2+},Dy{sup 3+}/CS-PCL scaffolds in differentiation

Modifications induced by swift heavy ions on poly(hydroxybutyrate-hydroxyvalerate) (PHB/HV) and poly(ε-caprolactone) (PCL). Part 2. Radicals characterization

International Nuclear Information System (INIS)

Rouxhet, L.; Mestdagh, M.; Legras, R.

2000-01-01

Modifications induced by different energetic heavy ions ( 40 Ar 9+ , 80 Kr 15+ , 129 Xe 24+ , 208 Pb 53+ and 208 Pb 56+ ) on poly(ε-caprolactone) (PCL) and poly(hydroxybutyrate-hydroxyvalerate) (PHB/HV) have been investigated by electron spin resonance (ESR). Indeed, film irradiation by heavy ions leads to, among other phenomena, the formation of radicals in the ion tracks. Thanks to ESR, it is possible to detect these radicals and to identify them or at least to characterize them by following the evolution of the radical signal as a function of parameters, like temperature, or the kinetic of disappearance of the radical species at ambient temperature in vacuum or ambient atmosphere. This study confirmed the generation of radicals by the irradiation of PHB/HV samples with energetic heavy ions reported in the literature. The study on PCL was not pursued after a few preliminary studies, revealing the presence of an ESR signal in the non-irradiated sample. Electronic stopping power has a major influence on radical decrease at ambient temperature. The ion used for the irradiation did not modify very much the radical signal and the evolution of the radicalar signal intensity with temperature. Different reasoning and experiments revealed that the glass transition temperature is a key temperature above which irreversible recombinations of the most stable radicals take place. A simulation study indicated that the most stable radical produced was probably a tertiary radical formed by the stabilization of the secondary radical resulting from the abstraction of a highly mobile hydrogen adjacent to the carbonyl

The crescent sign: dissociation of the polyethylene liner from a modular acetabular component in total hip arthroplasty

International Nuclear Information System (INIS)

White, S.P.; Blom, A.W.; Lee, M.; Smith, E.J.

2005-01-01

To study whether there was a common pattern of clinical symptoms, signs and radiographic features for the dissociation of the polyethylene liner from an acetabular component and to postulate reasons for these features. Retrospective study of notes and radiographs of cases of revision hip arthroplasty for polyethylene liner dissociation of the cementless Harris-Galante I porous-coated acetabular component (Zimmer Inc, Warsaw, IN) at the Avon Orthopaedic Centre, Bristol, UK and St. Mary's Hospital, Bristol, UK between 1995 and 2004. Patients were contacted to confirm preoperative symptoms. Nine cases of late polyethylene liner dissociation of this prosthesis have been revised in these institutions. All patients presented with a reduction in mobility, groin pain and limp. Eight patients reported an audible noise on hip movement. In all cases, radiographs showed radiolucency medial to the femoral neck in association with an eccentrically placed femoral head showing contact with the acetabular metal shell, which we have termed the ''crescent sign.'' There is a typical clinical presentation in this study. The diagnosis can be made from a single anteroposterior pelvic radiograph without the need for previous films for comparison, or the need for arthrography. Clinicians should look specifically for the crescent sign when an eccentrically placed femoral head has been noted, in order to differentiate the more unusual diagnosis of dissociation from that of polyethylene wear. Early revision surgery can prevent damage to the femoral head and metal acetabular shell, thus reducing the complexity of revision surgery. (orig.)

Intramuscular leukemic relapse: clinical signs and imaging findings. A multicentric analysis

Energy Technology Data Exchange (ETDEWEB)

Surov, Alexey [Martin Luther University Halle-Wittenberg, Department of Radiology, Halle (Germany); University of Leipzig, Department of Diagnostic and Interventional Radiology, Leipzig (Germany); Kiratli, Hayyam [Hacettepe University School of Medicine, Department of Ophthalmology, Ankara (Turkey); Im, Soo Ah [Seoul St. Mary' s Hospital, Department of Radiology, Seoul (Korea, Republic of); Manabe, Yasuhiro [National Hospital Organization Okayama Medical Center, Department of Neurology, Okayama (Japan); O' Neill, Alibhe; Shinagare, Atul B. [Brigham and Women' s Hospital, Department of Radiology, Boston, MA (United States); Spielmann, Rolf Peter [Martin Luther University Halle-Wittenberg, Department of Radiology, Halle (Germany)

2014-09-26

Leukemia is a group of malignant diseases involving peripheral blood and bone marrow. Extramedullary tumor manifestation in leukemia can also occur. They more often involve lymph nodes, skin, and bones. Intramuscular leukemic relapse (ILR) is very unusual. The aim of this analysis was to summarize the reported data regarding clinical signs and radiological features of ILR. The PubMed database was searched for publications related to ILR. After an analysis of all identified articles, 20 publications matched the inclusion criteria. The authors of the 20 publications were contacted and provided imaging of their cases for review. The following were recorded: age, gender, primary diagnosis, clinical signs, pattern, localization and size of the intramuscular leukemic relapse. Images of 16 patients were provided [8 computer tomographic (CT) images and 15 magnetic resonance images, MRI]. Furthermore, one patient with ILR was identified in our institutional database. Therefore, images of 17 patients were available for further analysis. Overall, 32 cases with ILR were included in the analysis. In most cases acute myeloid leukemia was diagnosed. Most ILRs were localized in the extremities (44 %) and in the extraocular muscles (44 %). Clinically, ILR manifested as local pain, swelling and muscle weakness. Radiologically, ILR presented most frequently with diffuse muscle infiltration. On postcontrast CT/MRI, most lesions demonstrated homogeneous enhancement. ILRs were hypo-/isointense on T1w and hyperintense on T2w images. ILR manifests commonly as focal pain, swelling and muscle weakness. ILR predominantly involved the extraocular musculature and the extremities. Radiologically, diffuse muscle infiltration was the most common imaging finding. (orig.)

Modeling online social signed networks

Science.gov (United States)

Li, Le; Gu, Ke; Zeng, An; Fan, Ying; Di, Zengru

2018-04-01

People's online rating behavior can be modeled by user-object bipartite networks directly. However, few works have been devoted to reveal the hidden relations between users, especially from the perspective of signed networks. We analyze the signed monopartite networks projected by the signed user-object bipartite networks, finding that the networks are highly clustered with obvious community structure. Interestingly, the positive clustering coefficient is remarkably higher than the negative clustering coefficient. Then, a Signed Growing Network model (SGN) based on local preferential attachment is proposed to generate a user's signed network that has community structure and high positive clustering coefficient. Other structural properties of the modeled networks are also found to be similar to the empirical networks.

Sign language: an international handbook

NARCIS (Netherlands)

Pfau, R.; Steinbach, M.; Woll, B.

2012-01-01

Sign language linguists show here that all the questions relevant to the linguistic investigation of spoken languages can be asked about sign languages. Conversely, questions that sign language linguists consider - even if spoken language researchers have not asked them yet - should also be asked of

Unusual tumour ablations: report of difficult and interesting cases

OpenAIRE

Mauri, Giovanni; Nicosia, Luca; Varano, Gianluca Maria; Shyn, Paul; Sartori, Sergio; Tombesi, Paola; Di Vece, Francesca; Orsi, Franco; Solbiati, Luigi

2017-01-01

Image-guided ablations are nowadays applied in the treatment of a wide group of diseases and in different organs and regions, and every day interventional radiologists have to face more difficult and unusual cases of tumour ablation. In the present case review, we report four difficult and unusual cases, reporting some tips and tricks for a successful image-guided treatment.

Retinoblastoma: a most unusual presentation

African Journals Online (AJOL)

Dr. C. Pedro-Egbe

Although leukocoria and strabismus are the most common presenting signs of retinoblastoma, a retrospective study by Abramson et al. identified 32 distinct presenting signs of retinoblastoma.6-8. A few other studies have also noted some distinct characteristics exhibited by children whose conditions were diagnosed in the ...

Unusual radiological features in Paget's disease of bone

International Nuclear Information System (INIS)

Moore, T.E.; Kathol, M.H.; El-Khoury, G.Y.; Walker, C.W.; Gendall, P.W.; Whitten, C.G.

1994-01-01

The radiological diagnosis of Paget's disease of bone is usually straightforward because most cases conform to well-established classic descriptions. Diagnosis becomes more difficult, however, when radiological appearances are not typical or other disease processes mask or alter the behavior of Paget's disease. Examples are presented to illustrate four categories of unusual radiological presentation of Paget's disease; (1) unusual disease progression, (2) massive post-immobilization lysis, (3) metastatic spread to pagetic bone, and (4) vertebral end-plate destruction that mimics infection. (orig.)

Traffic sign detection and analysis

DEFF Research Database (Denmark)

Møgelmose, Andreas; Trivedi, Mohan M.; Moeslund, Thomas B.

2012-01-01

Traffic sign recognition (TSR) is a research field that has seen much activity in the recent decade. This paper introduces the problem and presents 4 recent papers on traffic sign detection and 4 recent papers on traffic sign classification. It attempts to extract recent trends in the field...

Unusual causes of pneumothorax

Science.gov (United States)

Ouellette, Daniel R.; Parrish, Scott; Browning, Robert F.; Turner, J. Francis; Zarogoulidis, Konstantinos; Kougioumtzi, Ioanna; Dryllis, Georgios; Kioumis, Ioannis; Pitsiou, Georgia; Machairiotis, Nikolaos; Katsikogiannis, Nikolaos; Tsiouda, Theodora; Madesis, Athanasios; Karaiskos, Theodoros

2014-01-01

Pneumothorax is divided to primary and secondary. It is a situation that requires immediate treatment, otherwise it could have severe health consequences. Pneumothorax can be treated either by thoracic surgeons, or pulmonary physicians. In our current work, we will focus on unusual cases of pneumothorax. We will provide the etiology and treatment for each case, also a discussion will be made for each situation. PMID:25337394

The Forbidden Signs

DEFF Research Database (Denmark)

Kilstrup, Mogens

2016-01-01

While the field of semiotics has been active since it was started by Peirce, it appears like the last decade has been especially productive with a number of important new concepts being developed within the biosemiotics community. The novel concept of the Semiotic scaffold by Hoffmeyer is an impo......While the field of semiotics has been active since it was started by Peirce, it appears like the last decade has been especially productive with a number of important new concepts being developed within the biosemiotics community. The novel concept of the Semiotic scaffold by Hoffmeyer...... is an important addition that offers insight into the hardware requirements for bio-semiosis. As any type of semiosis must be dependent upon Semiotic scaffolds, I recently argued that the process of semiosis has to be divided into two separate processes of sign establishment and sign interpretation....... I also show that biological semiosis offers examples of forbidden signs, where the faulty interpretation of signs may lead to decimation of whole evolutionary lines of organisms. A new concept of Evolutionary memory which is applicable to both human and biological semiosis is explained...

Unusual imaging characteristics of complicated hydatid disease

International Nuclear Information System (INIS)

Turgut, Ahmet Tuncay; Altin, Levent; Topcu, Salih; Kilicoglu, Buelent; Altinok, Tamer; Kaptanoglu, Erkan; Karademir, Alp; Kosar, Ugur

2007-01-01

Hydatid disease, a worldwide zoonosis, is caused by the larval stage of the Echinococcus tapeworm. Although the liver and the lungs are the most frequently involved organs in the body, hydatid cysts of other organs are unusual. Radiologically, they usually demonstrate typical imaging findings, but unusual imaging characteristics of complicated cyst of hydatid disease, associated with high morbidity and mortality, are rarely described in the literature. The purpose of this study is to review the general features of hydatidosis and to discuss atypical imaging characteristics of the complicated hydatid disease in the human, with an emphasis on structure and rupture of the cystic lesion as well as ultrasonography (USG), computed tomography (CT), and magnetic resonance imaging (MRI) features of the disease. In our study, the available literature and images of the cases with complicated hydatidosis involving liver, lung, brain, spine and orbit were reviewed retrospectively. In hydatid disease, there are many potential local and systemic complications due to secondary involvement in almost any anatomic location in humans. Radiologically, in addition to the presence of atypical findings such as perifocal edema, non-homogenous contrast enhancement, multiplicity or septations and calcification, various unusual manifestations due to rupture or infection of the cyst have been observed in our cases with complicated hydatid disease. To prevent subsequent acute catastrophic results and the development of recurrences in various organs, it should be kept in mind that complicated hydatid cysts can cause unusual USG, CT, and MRI findings, in addition to typical ones, in endemic areas. Therefore, familiarity with atypical radiological appearances of complicated hydatid disease may be valuable in making a correct diagnosis and treatment

Unusual imaging characteristics of complicated hydatid disease

Energy Technology Data Exchange (ETDEWEB)

Turgut, Ahmet Tuncay [Department of Radiology, Ankara Training and Research Hospital, Ankara (Turkey)]. E-mail: ahmettuncayturgut@yahoo.com; Altin, Levent [Department of Radiology, Numune Training and Research Hospital, Ankara (Turkey); Topcu, Salih [Department of Thoracic Surgery, Faculty of Medicine, Kocaeli University, Izmit (Turkey); Kilicoglu, Buelent [Department of 4th General Surgery, Ankara Training and Research Hospital, Ankara (Turkey); Altinok, Tamer [Department of Thoracic Surgery, Meram Faculty of Medicine, Selcuk University, Konya (Turkey); Kaptanoglu, Erkan [Department of Neurosurgery, Numune Training and Research Hospital, Ankara (Turkey); Karademir, Alp [Department of Radiology, Numune Training and Research Hospital, Ankara (Turkey); Kosar, Ugur [Department of Radiology, Ankara Training and Research Hospital, Ankara (Turkey)

2007-07-15

Hydatid disease, a worldwide zoonosis, is caused by the larval stage of the Echinococcus tapeworm. Although the liver and the lungs are the most frequently involved organs in the body, hydatid cysts of other organs are unusual. Radiologically, they usually demonstrate typical imaging findings, but unusual imaging characteristics of complicated cyst of hydatid disease, associated with high morbidity and mortality, are rarely described in the literature. The purpose of this study is to review the general features of hydatidosis and to discuss atypical imaging characteristics of the complicated hydatid disease in the human, with an emphasis on structure and rupture of the cystic lesion as well as ultrasonography (USG), computed tomography (CT), and magnetic resonance imaging (MRI) features of the disease. In our study, the available literature and images of the cases with complicated hydatidosis involving liver, lung, brain, spine and orbit were reviewed retrospectively. In hydatid disease, there are many potential local and systemic complications due to secondary involvement in almost any anatomic location in humans. Radiologically, in addition to the presence of atypical findings such as perifocal edema, non-homogenous contrast enhancement, multiplicity or septations and calcification, various unusual manifestations due to rupture or infection of the cyst have been observed in our cases with complicated hydatid disease. To prevent subsequent acute catastrophic results and the development of recurrences in various organs, it should be kept in mind that complicated hydatid cysts can cause unusual USG, CT, and MRI findings, in addition to typical ones, in endemic areas. Therefore, familiarity with atypical radiological appearances of complicated hydatid disease may be valuable in making a correct diagnosis and treatment.

Metabolic Alkalosis, Acute Renal Failure and Epileptic Seizures as Unusual Manifestations of an Upside-Down Stomach

Directory of Open Access Journals (Sweden)

Johannes Stephani

2012-07-01

Full Text Available Upside-down stomach represents a critical and rare manifestation of hiatal hernias. Here we report on a 60-year-old male patient who was admitted to our hospital with epileptic seizures and dehydration. Laboratory tests revealed severe metabolic alkalosis (pH 7.56 with low potassium (2.7 mmol/l, hypochloremia (<60 mmol/l, increased hematocrit (53% and high levels of serum creatinine (651 µmol/l. Based on a history of recurrent vomiting, gastroscopy and computed tomography were performed. Both diagnostics showed an upside-down stomach with signs of incarceration. Upon infusion of sodium chloride 0.9%, acid-base state, electrolyte balance and renal function became improved. Subsequently, the patient was referred to the department of surgery for hiatoplasty with fundoplication. This case report highlights severe metabolic and neurological disorders as unusual and life-threatening complications of an upside-down stomach.

Numeral Incorporation in Japanese Sign Language

Science.gov (United States)

Ktejik, Mish

2013-01-01

This article explores the morphological process of numeral incorporation in Japanese Sign Language. Numeral incorporation is defined and the available research on numeral incorporation in signed language is discussed. The numeral signs in Japanese Sign Language are then introduced and followed by an explanation of the numeral morphemes which are…

Unusual causes of obstructive jaundice. Computed tomography

International Nuclear Information System (INIS)

Rodriguez, E.; Pombo, F.; Cao, I.; Fernandez, R.; Riba da, M.

1998-01-01

The purpose of this study is to present selected computed tomography (CT) images showing unusual causes of obstructive jaundice. We reviewed retrospectively the Ct findings of obstructive jaundice in 227 patients. The most common causes of biliary obstruction were adenocarcinoma of the pancreatic head (n=77) and cholangiocarcinoma (n=65). In 13 cases (5.7%), the etiology of obstructive jaundice was unusual or exceptional: tuberculous adenitis (n=3), obstruction of afferent loop (n=2)signet ring cell adenocarcinoma (n=3); in duodenum, gallbladder and papilla of Water), Mirizzi syndrome (n=1), adenocarcinoma of the hepatic flexure (n=1), choledochal cyst (n=1) and pancreatic lymphoma (n=1). (Author) 13 refs

13 CFR 305.12 - Project sign.

Science.gov (United States)

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Project sign. 305.12 Section 305... WORKS AND ECONOMIC DEVELOPMENT INVESTMENTS Requirements for Approved Projects § 305.12 Project sign. The... the construction period of a sign or signs at a conspicuous place at the Project site indicating that...

Nanoporous capsules of block co-polymers of [(MeO-PEG-NH)-b-(L-GluA)]-PCL for the controlled release of anticancer drugs for therapeutic applications

Science.gov (United States)

Amgoth, Chander; Dharmapuri, Gangappa; Kalle, Arunasree M.; Paik, Pradip

2016-03-01

Herein, new nanoporous capsules of the block co-polymers of MeO-PEG-NH-(L-GluA)10 and polycaprolactone (PCL) have been synthesized through a surfactant-free cost-effective self-assembled soft-templating approach for the controlled release of drugs and for therapeutic applications. The nanoporous polymer capsules are designed to be biocompatible and are capable of encapsulating anticancer drugs (e.g., doxorubicin hydrochloride (DOX) and imatinib mesylate (ITM)) with a high extent (˜279 and ˜480 ng μg-1, respectively). We have developed a nanoformulation of porous MeO-PEG-NH-(L-GluA)10-PCL capsules with DOX and ITM. The porous polymer nanoformulations have been programmed in terms of the release of anticancer drugs with a desired dose to treat the leukemia (K562) and human carcinoma cells (HepG2) in vitro and show promising IC50 values with a very high mortality of cancer cells (up to ˜96.6%). Our nanoformulation arrests the cell divisions due to ‘cellular scenescence’ and kills the cancer cells specifically. The present findings could enrich the effectiveness of idiosyncratic nanoporous polymer capsules for use in various other nanomedicinal and biomedical applications, such as for killing cancer cells, immune therapy, and gene delivery.

Modifications induced by swift heavy ions in poly(hydroxybutyrate-hydroxyvalerate) (PHB/HV) and poly(ε-caprolactone) (PCL) films. Part 1. Thermal behaviour and molecular mass modifications

International Nuclear Information System (INIS)

Rouxhet, L.; Legras, R.

2000-01-01

Modifications induced by different energetic heavy ions in poly(ε-caprolactone) (PCL) and poly(hydroxybutyrate-hydroxyvalerate) (PHB/HV) have been investigated by the differential scanning calorimetry (DSC) and steric exclusion chromatography (SEC). A certain dose of damages, depending mainly on the charge and mass of the ion and on the intensity of irradiation, has to be overcome in order to detect any effect on PHB/HV. Actually, at a given intensity of irradiation, superior to 10 10 ions/cm 2 , the level of damage intensity increased with the increase in charge and mass of the ion. Moreover, according to the SEC results, there seems to be a critical mass and/or charge threshold above which the dominant type of damages changes. As a matter of fact, high-density irradiation with Ar 9+ and Kr 15+ resulted mainly in chain scission whereas cross-linking was dominant when irradiating the polymer with Xe 24+ and Pb 56+ . The irradiation of PCL in the conditions studied did not modify significantly the values of the melting point, the crystallisation temperature and the molecular masses of the system studied. The main effect of the irradiation detected by the DSC is the cross-linking of the polymer chains

Nanoporous capsules of block co-polymers of [(MeO-PEG-NH)-b-(L-GluA)]-PCL for the controlled release of anticancer drugs for therapeutic applications

International Nuclear Information System (INIS)

Amgoth, Chander; Paik, Pradip; Dharmapuri, Gangappa; Kalle, Arunasree M

2016-01-01

Herein, new nanoporous capsules of the block co-polymers of MeO-PEG-NH-(L-GluA) 10 and polycaprolactone (PCL) have been synthesized through a surfactant-free cost-effective self-assembled soft-templating approach for the controlled release of drugs and for therapeutic applications. The nanoporous polymer capsules are designed to be biocompatible and are capable of encapsulating anticancer drugs (e.g., doxorubicin hydrochloride (DOX) and imatinib mesylate (ITM)) with a high extent (∼279 and ∼480 ng μg −1 , respectively). We have developed a nanoformulation of porous MeO-PEG-NH-(L-GluA) 10 -PCL capsules with DOX and ITM. The porous polymer nanoformulations have been programmed in terms of the release of anticancer drugs with a desired dose to treat the leukemia (K562) and human carcinoma cells (HepG2) in vitro and show promising IC 50 values with a very high mortality of cancer cells (up to ∼96.6%). Our nanoformulation arrests the cell divisions due to ‘cellular scenescence’ and kills the cancer cells specifically. The present findings could enrich the effectiveness of idiosyncratic nanoporous polymer capsules for use in various other nanomedicinal and biomedical applications, such as for killing cancer cells, immune therapy, and gene delivery. (paper)

"Hearing" the signs:influence of sign language in an inclusive classroom

OpenAIRE

Monney, M. (Mariette)

2017-01-01

Abstract Finding new methods to achieve the goals of Education For All is a constant worry for primary school teachers. Multisensory methods have been proved to be efficient in the past decades. Sign Language, being a visual and kinesthetic language, could become a future educational tool to fulfill the needs of a growing diversity of learners. This ethnographic study describes how Sign Language exposure in inclusive classr...

Kinship in Mongolian Sign Language

Science.gov (United States)

Geer, Leah

2011-01-01

Information and research on Mongolian Sign Language is scant. To date, only one dictionary is available in the United States (Badnaa and Boll 1995), and even that dictionary presents only a subset of the signs employed in Mongolia. The present study describes the kinship system used in Mongolian Sign Language (MSL) based on data elicited from…

Eye Gaze in Creative Sign Language

Science.gov (United States)

Kaneko, Michiko; Mesch, Johanna

2013-01-01

This article discusses the role of eye gaze in creative sign language. Because eye gaze conveys various types of linguistic and poetic information, it is an intrinsic part of sign language linguistics in general and of creative signing in particular. We discuss various functions of eye gaze in poetic signing and propose a classification of gaze…

Clinical study for findings of pneumothoraces on the plain chest film

Energy Technology Data Exchange (ETDEWEB)

Saeki, Mitsuaki

1988-11-01

Two hundred and fifty cases of pneumothoraces in intensive care unit in the last seven and half years were reviewed. In intensive care unit, plain chest films are likely to be obtained on supine position that make difficult to diagnose pneumothorax, because of unusual distribution of air in the pleural cavity. In our institution, they were obtained in supine position in 75 %. In our series of 207 supine chest cases, anteromedial and subpulmonic recesses were involved in 11.6 % and 25.6 % respectively. Twenty five cases (12 %) showed unusual location of air. Several radiographic signs have been previously described to recognize this condition. Basilar hyperlucency was most reliable sign (100 %) of detecting subpulmonary pneumothorax. Double diaphragm sign (60 %) and distinct cardiac apex (46.6 %) were also reliable signs. Almost all cases of unusual pneumothoraces were recognized on supine radiographs. However, CT was useful to detect unusual pneumothorax in patient with pneumomediastinum or pulmonary contusion. Unusual pneumothoraces were seen only in traumatized patients. The importance of careful observation of plain chest films to detecte unusual pneumothorax in patients with blunt chest trauma was stressed.

Unusual cause of a painful right testicle in a 16-year-old man: a case report

Directory of Open Access Journals (Sweden)

Riaz Amjid A

2011-01-01

Full Text Available Abstract Introduction Urgent surgical exploration of the scrotum of a child or teenager who presents with a painful and swollen testicle is paramount if testicular torsion is not to be missed. It is extremely rare for a non-scrotal pathology to present with acute scrotal signs. Here we present such a rare case and emphasize the importance of being aware of this potential clinical pitfall. Case presentation A 16-year-old Caucasian man presented as a surgical emergency with a five to six hour history of a painful, red, and swollen right hemiscrotum. He also complained of vague lower abdominal pain, vomiting, and watery diarrhea. He had a temperature of 38.5°C and a tender, red, and swollen right hemiscrotum. The right testicle appeared elevated. He was mildly tender in his central and upper abdomen and less so in the lower abdomen. No convincing localizing abdominal signs were noted. He had an increased white cell count (15 × 109/L and C-reactive protein (CRP; 300 mg/L. Urgent right hemiscrotal exploration revealed about 5 ml of pus in the tunica vaginalis and a normal testicle. A right iliac fossa incision identified the cause: a perforated retrocecal appendix. Appendectomy was performed, and both the abdomen and scrotum washed copiously with saline before closure. The patient made an uneventful recovery. Conclusion Acute appendicitis presenting with scrotal signs due to a patent processus vaginalis is an extremely rare clinical entity. To date, fewer than five such cases have been reported in the medical literature. It is, therefore, extremely important to be aware of this unusual clinical scenario, as only a high index of suspicion will enable prompt, successful management of both the appendicitis and the scrotal abscess.

Electronic traffic signs: Reflecting upon its transition

Energy Technology Data Exchange (ETDEWEB)

Arbaiza Martin, A.E.; Alba, A.L.; Hernando Mazon, A.; Blanch Mico, M.T.

2016-07-01

In our days we face a fundamental issue concerning road signs. We may display contents in vertical and horizontal format (static signs, variable message signs, road markings), either on a post, a gantry or a dashboard. And we foresee a coming age where the excellent matrix resolution of painted signs will be truly approached by the resolution of full matrix displays. But we also risk a babel context threatening the universal approach encouraged by international catalogues as the 1968 Convention (ECE/TRANS/196, 2007). And the fundamental risk comes from our decisions regarding how the transition from the contents and formats displayed on static message signs to the ones displayed on electronic signs (in gantries or dashboards) should be. Our work explores this issue specifically, considering the transition from Advance Direction Signs (static message signs, class G, 1 in the 1968 Convention) to what could be termed Advance Location Signs (signs concerning the location of variable events with regards to certain landmarks) developed as an adaptation of the G, 1 class to electronic traffic signs.(Author)

Road Signs for UV-Completion

CERN Document Server

Dvali, Gia; Gomez, Cesar

2012-01-01

We confront the concepts of Wilsonian UV-completion versus self-completion by Classicalization in theories with derivatively-coupled scalars. We observe that the information about the UV-completion road is encoded in the sign of the derivative terms. We note that the sign of the derivative couplings for which there is no consistent Wilsonian UV-completion is the one that allows for consistent classicalons. This is an indication that for such a sign the vertex must be treated as fundamental and the theory self-protects against potential inconsistencies, such as superluminality, via self-completion by classicalization. Applying this reasoning to the UV-completion of the Standard Model, we see that the information about the Higgs versus classicalization is encoded in the sign of the scattering amplitude of longitudinal W-bosons. Negative sign excludes Higgs or any other weakly-coupled Wilsonian physics.

The Use of Sign Language Pronouns by Native-Signing Children with Autism

Science.gov (United States)

Shield, Aaron; Meier, Richard P.; Tager-Flusberg, Helen

2015-01-01

We report the first study on pronoun use by an under-studied research population, children with autism spectrum disorder (ASD) exposed to American Sign Language from birth by their deaf parents. Personal pronouns cause difficulties for hearing children with ASD, who sometimes reverse or avoid them. Unlike speech pronouns, sign pronouns are…

Interpretation of unusual events from CERN and DESY

International Nuclear Information System (INIS)

Hall, L.J.; Jaffee, R.L.; Rosner, J.L.

1984-01-01

Several classes of interesting and unusual events from the Sp-barpS and from PETRA are studied with two purposes in mind. Firstly, varieties of background within the standard SU(3)xSU(2)xU(1) model are described, together with estimates of the number of expected events. Secondly, a review of the recent explanations of the events involving new physics is given. Critical assessments of these proposals focus on the assumptions made, expected rates for the unusual events, and the ability to account for events of several categories

Recurring waterbird mortalities and unusual etiologies

Science.gov (United States)

Cole, Rebecca A.; Franson, J. Christian; Boere, Gerard C.; Galbraith, Colin A.; Stroud, David A.

2006-01-01

Over the last decade, the National Wildlife Health Center of the United States Geological Survey has documented various largescale mortalities of birds caused by infectious and non-infectious disease agents. Some of these mortality events have unusual or unidentified etiologies and have been recurring. While some of the causes of mortalities have been elucidated, others remain in various stages of investigation and identification. Two examples are discussed: 1) Leyogonimus polyoon (Class: Trematoda), not found in the New World until 1999, causes severe enteritis and has killed over 15 000 American Coot Fulica americana in the upper mid-western United States. The geographic range of this parasite within North America is predicted to be limited to the Great Lakes Basin. 2) In the early 1990s, estimates of up to 6% of the North American population of the Eared Grebe Podiceps nigricollis died at Salton Sea, California, with smaller mortalities occurring throughout the 1990s. Birds were observed to have unusual preening behaviour, and to congregate at freshwater drains and move onto land. Suggested etiologies included interactions of contaminants, immuno-suppression, an unusual form of a bacterial disease, and an unknown biotoxin. During studies carried out from 2000 to 2003, Eared Grebe mortality did not approach the level seen in the early 1990s and, although bacteria were identified as minor factors, the principal cause of mortality remains undetermined. The potential population impact of these emerging and novel disease agents is currently unknown.

Controllable mineral coatings on PCL scaffolds as carriers for growth factor release.

Science.gov (United States)

Suárez-González, Darilis; Barnhart, Kara; Migneco, Francesco; Flanagan, Colleen; Hollister, Scott J; Murphy, William L

2012-01-01

In this study, we have developed mineral coatings on polycaprolactone scaffolds to serve as templates for growth factor binding and release. Mineral coatings were formed using a biomimetic approach that consisted in the incubation of scaffolds in modified simulated body fluids (mSBF). To modulate the properties of the mineral coating, which we hypothesized would dictate growth factor release, we used carbonate (HCO(3)) concentration in mSBF of 4.2 mm, 25 mm, and 100 mm. Analysis of the mineral coatings formed using scanning electron microscopy indicated growth of a continuous layer of mineral with different morphologies. X-ray diffraction analysis showed peaks associated with hydroxyapatite, the major inorganic constituent of human bone tissue in coatings formed in all HCO(3) concentrations. Mineral coatings with increased HCO(3) substitution showed more rapid dissolution kinetics in an environment deficient in calcium and phosphate but showed re-precipitation in an environment with the aforementioned ions. The mineral coating provided an effective mechanism for growth factor binding and release. Peptide versions of vascular endothelial growth factor (VEGF) and bone morphogenetic protein 2 (BMP2) were bound with efficiencies up to 90% to mineral mineral-coated PCL scaffolds. We also demonstrated sustained release of all growth factors with release kinetics that were strongly dependent in the solubility of the mineral coating. Copyright © 2011 Elsevier Ltd. All rights reserved.

Unusual anatomy of maxillary central incisor with two roots

OpenAIRE

T S Ashwini Shivakumar; Saleem Makandar; Ajay Kadam

2012-01-01

Introduction: Knowledge of root canal morphology is essential for successful endodontic therapy. Failure to recognize unusual root canal anatomy may lead to unsuccessful endodontic treatment. Case Report: This case report describes the successful endodontic treatment of the maxillary central incisor with unusual anatomy of two roots and two root canals. A 23-year-old male patient was referred for dental consultation with discoloration of the maxillary right central incisor with periapical les...

An Unusual Case Report of Bertolotti’s Syndrome: Extraforaminal Stenosis and L5 Unilateral Root Compression (Castellvi Type III an LSTV)

Science.gov (United States)

Kapetanakis, Stylianos; Chaniotakis, Constantinos; Paraskevopoulos, Constantinos; Pavlidis, Pavlos

2017-01-01

Introduction: Castellvi Type III lumbosacral transitional vertebrae (LSTV) is an unusual case of Bertolotti’s syndrome (BS) due to extraforaminal stenosis, especially manifesting in elderly patients. Case Report: We report a case of BS in a 62 years old Greek female. The signs of the clinical examination are low back pain, sciatica, hypoesthesia, and pain to the contribution of L5 nerve. Imaging techniques revealed an LSTV Type III a (complete sacralization between LSTV and sacrum). Conclusion: Despite the fact that LSTV is a congenital lesion, the clinical manifestation of BS may present in the elderly population. The accumulative effect of the gradual degeneration of intervertebral foramen (stenosis) may lead to the compression of extraforaminal portion of the nerve root. PMID:29051870

The predictive accuracy of the black hole sign and the spot sign for hematoma expansion in patients with spontaneous intracerebral hemorrhage.

Science.gov (United States)

Yu, Zhiyuan; Zheng, Jun; Ma, Lu; Guo, Rui; Li, Mou; Wang, Xiaoze; Lin, Sen; Li, Hao; You, Chao

2017-09-01

In patients with spontaneous intracerebral hemorrhage (sICH), hematoma expansion (HE) is associated with poor outcome. Spot sign and black hole sign are neuroimaging predictors for HE. This study was aimed to compare the predictive value of two signs for HE. Within 6 h after onset of sICH, patients were screened for the computed tomography angiography spot sign and the non-contrast computed tomography black hole sign. The sensitivity, specificity, positive predictive value (PPV), and negative predictive value (NPV) of two signs for HE prediction were calculated. The accuracy of two signs in predicting HE was analyzed by receiver-operator analysis. A total of 129 patients were included in this study. Spot sign was identified in 30 (23.3%) patients and black hole sign in 29 (22.5%) patients, respectively. Of 32 patients with HE, spot sign was observed in 19 (59.4%) and black hole sign was found in 14 (43.8%). The occurrence of black hole sign was significantly associated with spot sign (P black hole sign for predicting HE were 43.75, 84.54, 48.28, and 82.00%, respectively. The area under the curve was 0.740 for spot sign and 0.641 for black hole sign. (P = 0.228) Both spot sign and black hole sign appeared to have good predictive value for HE, and spot sign seemed to be a better predictor.

Xanthogranulomatous endometritis: an unusual pathological entity ...

African Journals Online (AJOL)

Xanthogranulomatous endometritis is an unusual pathological entity mimicking endometrial carcinoma. This shows sheets of foamy histiocytes alongwith other inflammatory cells. We, hereby, report a case of 45 year multigravida female with irregular menstrual history, clinically diagnosed as carcinoma and ...

Sociolinguistic Typology and Sign Languages.

Science.gov (United States)

Schembri, Adam; Fenlon, Jordan; Cormier, Kearsy; Johnston, Trevor

2018-01-01

This paper examines the possible relationship between proposed social determinants of morphological 'complexity' and how this contributes to linguistic diversity, specifically via the typological nature of the sign languages of deaf communities. We sketch how the notion of morphological complexity, as defined by Trudgill (2011), applies to sign languages. Using these criteria, sign languages appear to be languages with low to moderate levels of morphological complexity. This may partly reflect the influence of key social characteristics of communities on the typological nature of languages. Although many deaf communities are relatively small and may involve dense social networks (both social characteristics that Trudgill claimed may lend themselves to morphological 'complexification'), the picture is complicated by the highly variable nature of the sign language acquisition for most deaf people, and the ongoing contact between native signers, hearing non-native signers, and those deaf individuals who only acquire sign languages in later childhood and early adulthood. These are all factors that may work against the emergence of morphological complexification. The relationship between linguistic typology and these key social factors may lead to a better understanding of the nature of sign language grammar. This perspective stands in contrast to other work where sign languages are sometimes presented as having complex morphology despite being young languages (e.g., Aronoff et al., 2005); in some descriptions, the social determinants of morphological complexity have not received much attention, nor has the notion of complexity itself been specifically explored.

Sociolinguistic Typology and Sign Languages

Science.gov (United States)

Schembri, Adam; Fenlon, Jordan; Cormier, Kearsy; Johnston, Trevor

2018-01-01

This paper examines the possible relationship between proposed social determinants of morphological ‘complexity’ and how this contributes to linguistic diversity, specifically via the typological nature of the sign languages of deaf communities. We sketch how the notion of morphological complexity, as defined by Trudgill (2011), applies to sign languages. Using these criteria, sign languages appear to be languages with low to moderate levels of morphological complexity. This may partly reflect the influence of key social characteristics of communities on the typological nature of languages. Although many deaf communities are relatively small and may involve dense social networks (both social characteristics that Trudgill claimed may lend themselves to morphological ‘complexification’), the picture is complicated by the highly variable nature of the sign language acquisition for most deaf people, and the ongoing contact between native signers, hearing non-native signers, and those deaf individuals who only acquire sign languages in later childhood and early adulthood. These are all factors that may work against the emergence of morphological complexification. The relationship between linguistic typology and these key social factors may lead to a better understanding of the nature of sign language grammar. This perspective stands in contrast to other work where sign languages are sometimes presented as having complex morphology despite being young languages (e.g., Aronoff et al., 2005); in some descriptions, the social determinants of morphological complexity have not received much attention, nor has the notion of complexity itself been specifically explored. PMID:29515506

Sociolinguistic Typology and Sign Languages

Directory of Open Access Journals (Sweden)

Adam Schembri

2018-02-01

Full Text Available This paper examines the possible relationship between proposed social determinants of morphological ‘complexity’ and how this contributes to linguistic diversity, specifically via the typological nature of the sign languages of deaf communities. We sketch how the notion of morphological complexity, as defined by Trudgill (2011, applies to sign languages. Using these criteria, sign languages appear to be languages with low to moderate levels of morphological complexity. This may partly reflect the influence of key social characteristics of communities on the typological nature of languages. Although many deaf communities are relatively small and may involve dense social networks (both social characteristics that Trudgill claimed may lend themselves to morphological ‘complexification’, the picture is complicated by the highly variable nature of the sign language acquisition for most deaf people, and the ongoing contact between native signers, hearing non-native signers, and those deaf individuals who only acquire sign languages in later childhood and early adulthood. These are all factors that may work against the emergence of morphological complexification. The relationship between linguistic typology and these key social factors may lead to a better understanding of the nature of sign language grammar. This perspective stands in contrast to other work where sign languages are sometimes presented as having complex morphology despite being young languages (e.g., Aronoff et al., 2005; in some descriptions, the social determinants of morphological complexity have not received much attention, nor has the notion of complexity itself been specifically explored.

An unusual coexistence of Addison's disease and ...

African Journals Online (AJOL)

2013-07-17

Jul 17, 2013 ... Case Study: An unusual coexistence of Addison's disease and phaeochromocytoma. 164 ... strongly positive. ... Department of Endocrinology and Metabolism, Ondokuz Mayis University Medical School, Samsun, Turkey.

Adapting tests of sign language assessment for other sign languages--a review of linguistic, cultural, and psychometric problems.

Science.gov (United States)

Haug, Tobias; Mann, Wolfgang

2008-01-01

Given the current lack of appropriate assessment tools for measuring deaf children's sign language skills, many test developers have used existing tests of other sign languages as templates to measure the sign language used by deaf people in their country. This article discusses factors that may influence the adaptation of assessment tests from one natural sign language to another. Two tests which have been adapted for several other sign languages are focused upon: the Test for American Sign Language and the British Sign Language Receptive Skills Test. A brief description is given of each test as well as insights from ongoing adaptations of these tests for other sign languages. The problems reported in these adaptations were found to be grounded in linguistic and cultural differences, which need to be considered for future test adaptations. Other reported shortcomings of test adaptation are related to the question of how well psychometric measures transfer from one instrument to another.

Stable or unstable tear of the anterior cruciate ligament of the knee: an MR diagnosis?

Energy Technology Data Exchange (ETDEWEB)

Dyck, Pieter van; Gielen, Jan L.; Parizel, Paul M. [University Hospital Antwerp and University of Antwerp, Department of Radiology, Edegem (Belgium); Vanhoenacker, Filip M. [University Hospital Antwerp and University of Antwerp, Department of Radiology, Edegem (Belgium); AZ St-Maarten Duffel/Mechelen, Department of Radiology, Duffel (Belgium); Wouters, Kristien [University Hospital Antwerp and University of Antwerp, Department of Scientific Coordination and Biostatistics, Edegem (Belgium); Dossche, Lieven [University Hospital Antwerp and University of Antwerp, Department of Orthopedics, Edegem (Belgium)

2012-03-15

To determine the usefulness of magnetic resonance (MR) imaging to distinguish stable from unstable tears of the anterior cruciate ligament (ACL) of the knee. MR images of 97 patients with surgically confirmed ACL tear were retrospectively reviewed. According to arthroscopic and clinical examination, these patients had 36 stable and 61 unstable (9 partial and 52 complete) ACL tears. MR images were interpreted by two blinded reviewers and scored with respect to previously reported primary and secondary MR signs of ACL injury. Based on a comprehensive assessment of all the MR findings, ACLs were categorized as being stable or unstable. MR accuracy was calculated considering only primary MR signs and considering both primary and secondary MR signs of ACL injury, separately. Accuracy of each individual primary and secondary MR sign was calculated. Considering only primary MR signs, sensitivity, specificity, and accuracy of MR were 77, 92, and 82%, respectively. Considering both primary and secondary MR signs, sensitivity, specificity, and accuracy of MR were 59, 81, and 67%, respectively. Of all MR signs, discontinuity and abnormal orientation had highest test accuracy (79 and 87%, respectively). Anterior tibial translation, uncovering of the posterior horn of the lateral meniscus, and hyperbuckled PCL were only seen in unstable ACLs (specificity 100%), but these secondary findings had low sensitivity (23%). Bone contusion around the lateral knee compartment was seen in both unstable and stable ACLs (accuracy 64%). Previously reported MR imaging signs do not allow accurate distinction between clinically stable and unstable ACL injuries. Anterior tibial translation, uncovering of the posterior horn of the lateral meniscus, and hyperbuckled PCL, if present, are helpful signs in the diagnosis of an unstable tear. The presence of bone marrow edema around the lateral knee compartment is not predictive of ACL insufficiency. (orig.)

Platelet lysate as a serum replacement for skin cell culture on biomimetic PCL nanofibers.

Science.gov (United States)

Sovkova, Vera; Vocetkova, Karolina; Rampichova, Michala; Mickova, Andrea; Buzgo, Matej; Lukasova, Vera; Dankova, Jana; Filova, Eva; Necas, Alois; Amler, Evzen

2018-06-01

Platelets are a popular source of native growth factors for tissue engineering applications. The aim of the study was to verify the use of platelet lysate as a fetal bovine serum (FBS) replacement for skin cell culture. The cytokine content of the platelet lysate was characterized using the Bio-Plex system. The cells (fibroblasts, melanocytes, and keratinocytes) were cultured on PCL nanofibrous scaffolds to mimic their natural microenvironment. The cytokine content of the platelet lysate was determined, and to the cells, a medium containing platelet lysate or platelet lysate in combination with FBS was added. The results showed that 7% (v/v) platelet lysate was sufficient to supplement 10% (v/v) FBS in the culture of fibroblasts and keratinocytes. The combination of platelet lysate and FBS had a rather inhibitory effect on fibroblasts, in contrary to keratinocytes, where the effect was synergic. Platelet lysate did not sufficiently promote proliferation in melanocytes; however, the combination of FBS and platelet lysate yielded a better outcome and resulted in bipolar morphology of the cultured melanocytes. The data indicated that platelet lysate improved cell proliferation and metabolic activity and may be used as an additive to the cell culture media.

Locally aggressive and multifocal phosphaturic mesenchymal tumors: two unusual cases of tumor-induced osteomalacia.

Science.gov (United States)

Higley, Meghan; Beckett, Brooke; Schmahmann, Sandra; Dacey, Elizabeth; Foss, Erik

2015-12-01

Tumor-induced osteomalacia (TIO) has long been recognized as a clinical paraneoplastic syndrome. The identification of a unique histopathologic entity, the phosphaturic mesenchymal tumor (PMT), as a distinct etiology for TIO has been a more recent discovery. The majority of published cases describe a solitary, non-aggressive appearing soft tissue or osseous lesions in patients with osteomalacia; aggressive appearing or multifocal lesions appear to be exceedingly rare. These tumors characteristically secrete fibroblast growth factor 23 (FGF23). Elevated serum levels of FGF23 result in phosphate wasting and osteomalacia. In the majority of cases, laboratory abnormalities and clinical signs and symptoms of osteomalacia precede identification of the causative lesion by years. Following diagnosis, complete resection with wide margins to prevent local recurrence is most often curative. Imaging characteristics of PMT are diverse and remain incompletely defined, as the majority of previous publications are outside of the radiologic literature. We present multiple imaging modalities in two cases of patients with debilitating osteomalacia and unusual appearing PMTs: one with a locally aggressive lesion leading to pathologic fracture, the second presenting with exceedingly rare multifocal PMT.

Sociolinguistic Typology and Sign Languages

OpenAIRE

Adam Schembri; Jordan Fenlon; Kearsy Cormier; Trevor Johnston

2018-01-01

This paper examines the possible relationship between proposed social determinants of morphological ‘complexity’ and how this contributes to linguistic diversity, specifically via the typological nature of the sign languages of deaf communities. We sketch how the notion of morphological complexity, as defined by Trudgill (2011), applies to sign languages. Using these criteria, sign languages appear to be languages with low to moderate levels of morphological complexity. This may partly reflec...

Septic arthritis as the first sign of Candida tropicalis fungaemia in an acute lymphoid leukemia patient

Directory of Open Access Journals (Sweden)

Vicari Perla

2003-01-01

Full Text Available Fungal infections caused by Candida species have increased in incidence during the past two decades in England, North America and Europe. Candidal arthritis is rare in patients who are not intravenous drug users or are who not using a prostheses. We report the case of a 24-year-old man with acute lymphoid leukemia, who developed Candida tropicalis arthritis during an aplastic period after chemotherapy. This is the eighth case described in the literature of C. tropicalis causing arthritis without intra-articular inoculation. We call attention to an unusual first sign of fungal infection: septic arthritis without intra-articular inoculation. However, this case differs from the other seven, since despite therapy a fast and lethal evolution was observed. We reviewed reported cases, incidence, risk factors, mortality and treatment of neutropenic patients with fungal infections.

The rarity of "unusual" [corrected] dispositions of victim bodies: staging and posing.

Science.gov (United States)

Keppel, Robert D; Weis, Joseph G

2004-11-01

The act of leaving a victim's body in an unusual position is a conscious criminal action by an offender to thwart an investigation, shock the finder and investigators of the crime scene, or give perverted pleasure to the killer. The unusual position concepts of posing and staging a murder victim have been documented thoroughly and have been accepted by the courts as a definable phenomenon. One staging case and one posing case are outlined and reveal characteristics of those homicides. From the Washington State Attorney General's Homicide Investigation and Tracking System's database on murder covering the years 1981-2000 (a total of 5,224 cases), the relative frequency of unusual body dispositions is revealed as a very rare occurrence. Only 1.3% of victims are left in an unusual position, with 0.3% being posed and 0.1% being staged. The characteristics of these types of murders also set them apart: compared to all other murders, in staged murders the victims and killers are, on average, older. All victims and offenders in the staged murders are white, with victims being disproportionately white in murders with any kind of unusual body disposition. Likewise, females stand out as victims when the body is posed, staged, or left in other unusual positions. Whereas posed bodies are more likely to include sexual assault, often in serial murders, there is no evidence of either in the staged cases. Lastly, when a body is left in an unusual position, binding is more likely, as well as the use of more "hands on" means of killing the victim, such as stabbing or cutting weapons, bludgeons, ligatures, or hands and feet.

Attitudes of Tourists about the Possibility of Development of Unusual Hotels in Serbia

Directory of Open Access Journals (Sweden)

Klisara Dubravka

2015-01-01

Full Text Available This paper deals with the problem of relatively young type of hotel that is increasingly attracting the attention of the modern tourist. Unusual hotels are very interesting phenomenon, not only for tourists and hospitality professionals, but also for people who are (currently out of the tourist flows. These are facilities with untypical architectural design, non-standard equipped or with services that are not common in the hospitality industry. They often contribute to the attractiveness of the area in which they are located. However, business sustainability of unusual hotels, as well as any other hotel, depends on guests, i.e. number of overnight stays.We present the results of research conducted among tourists in Serbia. The main task is to examined whether tourists are interested in the potential developing of unusual hotels. If so, which subtypes of unusual hotel would be best suited for the territory of Serbia. In order to compare experiences and operating results, parallel survey was conducted among owners of unusual hotels around the world. The results suggest a conclusion - with a favourable investment climate, unusual hotels should have a future in Serbia.

An unusual foreign body of esophagus

Directory of Open Access Journals (Sweden)

Surinder K Singhal

2010-07-01

Full Text Available We report a rare case of an unusually long foreign body (Datun impacted in the esophagus of a 56 year-old gentleman. He was literate, without any psychiatric illness and had been using “Neem” (Azadirachta indica stick for cleaning his teeth for the past twenty years. Neem sticks are used for brushing teeth, perhaps one of the earliest and very effective dental care. On closer questioning he revealed his habit of passing the Neem stick into his throat with the aim of cleaning it too while cleaning his teeth. He presented to our emergency early in the morning with this strange long foreign body impacted in his esophagus which was removed successfully using a Jackson’s adult rigid oesophagoscope. We believe this to be the first case of such an unusually long foreign body to be reported in the literature.

Phonological Development in Hearing Learners of a Sign Language: The Influence of Phonological Parameters, Sign Complexity, and Iconicity

Science.gov (United States)

Ortega, Gerardo; Morgan, Gary

2015-01-01

The present study implemented a sign-repetition task at two points in time to hearing adult learners of British Sign Language and explored how each phonological parameter, sign complexity, and iconicity affected sign production over an 11-week (22-hour) instructional period. The results show that training improves articulation accuracy and that…

Standardization of Sign Languages

Science.gov (United States)

Adam, Robert

2015-01-01

Over the years attempts have been made to standardize sign languages. This form of language planning has been tackled by a variety of agents, most notably teachers of Deaf students, social workers, government agencies, and occasionally groups of Deaf people themselves. Their efforts have most often involved the development of sign language books…

Containing Unusual Resistance

Science.gov (United States)

... used infection control and contact precautions, such as gloves and gowns, to help stop spread. No further spread found during follow-up assessments. SOURCE: CDC Vital Signs, April 2018. Top of Page Infographic SOURCE: AR Investment Map: www. ...

Stabilization of actinides and lanthanides in unusually high oxidation states

International Nuclear Information System (INIS)

Eller, P.G.; Penneman, R.A.

1986-01-01

Chemical environments can be chosen which stabilize actinides and lanthanides in unusually high or low oxidation states and in unusual coordination. In many cases, one can rationalize the observed species as resulting from strong charge/size influences provided by specific sites in host lattices (e.g., Tb(IV) in BaTbO 3 or Am(IV) in polytungstate anions). In other cases, the unusual species can be considered from an acid-base viewpoint (e.g., U(III) in AsF 5 /HF solution or Pu(VII) in Li 5 PuO 6 ). In still other cases, an interplay of steric and redox effects can lead to interesting comparisons (e.g., instability of double fluoride salts of Pu(V) and Pu(VI) relative to U, Np, and Am analogues). Generalized ways to rationalize compounds containing actinides and lanthanides in unusual valences (particularly high valences), including the above and numerous other examples, will form the focus of this paper. Recently developed methods for synthesizing high valent f-element fluorides using superoxidizers and superacids at low temperatures will also be described. 65 refs., 8 figs., 9 tabs

H5N2 Highly Pathogenic Avian Influenza Viruses from the US 2014-2015 outbreak have an unusually long pre-clinical period in turkeys.

Science.gov (United States)

Spackman, Erica; Pantin-Jackwood, Mary J; Kapczynski, Darrell R; Swayne, David E; Suarez, David L

2016-11-22

From December 2014 through June 2015, the US experienced the most costly highly pathogenic avian influenza (HPAI) outbreak to date. Most cases in commercial poultry were caused by an H5N2 strain which was a reassortant with 5 Eurasian lineage genes, including a clade 2.3.4.4 goose/Guangdong/1996 lineage hemagglutinin, and 3 genes from North American wild waterfowl low pathogenicity avian influenza viruses. The outbreak primarily affected turkeys and table-egg layer type chickens. Three isolates were selected for characterization in turkeys: the US index isolate from December 2014 (A/northern pintail/WA/40964/2014), and two poultry isolates from April 2015 (A/chicken/IA/13388/2015 and A/turkey/MN/12528/2015). Four week old broad-breasted white turkeys were inoculated with one of three doses (10 2 , 10 4 or 10 6 50% egg infectious doses [EID 50 ] per bird) of each of the isolates to evaluate infectious dose and pathogenesis. The mean bird infectious dose of A/northern pintail/WA/40964/2014 and A/turkey/MN/12528/2015 was 10 5 EID 50 per bird, but was 10 3 EID 50 per bird for A/chicken/IA/13388/2015, suggesting the latter had greater adaptation to gallinaceous birds. All three isolates had unusually long mean death time of 5.3-5.9 days post challenge, and the primary clinical signs were severe lethargy and neurological signs which started no more than 24 h before death (the average pre-clinical period was 4 days). Infected turkeys also shed high levels of virus by both the oropharyngeal and cloacal routes. The unusually long mean death times, high levels of virus in feces, and increased adaptation of the later viruses may have contributed to the rapid spread of the virus during the peak of the outbreak.

Probable Unusual Transmission of Zika Virus

Centers for Disease Control (CDC) Podcasts

This podcast discusses a study about the probable unusual transmission of Zika Virus Infection from a scientist to his wife, published in the May 2011 issue of Emerging Infectious Diseases. Dr. Brian Foy, Associate Professor at Colorado State University, shares details of this event.

Phonological Similarity in American Sign Language.

Science.gov (United States)

Hildebrandt, Ursula; Corina, David

2002-01-01

Investigates deaf and hearing subjects' ratings of American Sign Language (ASL) signs to assess whether linguistic experience shapes judgments of sign similarity. Findings are consistent with linguistic theories that posit movement and location as core structural elements of syllable structure in ASL. (Author/VWL)

Unusual Presentation of Maydl's Hernia

African Journals Online (AJOL)

Nikhil NBA, Natarajan K, Mohanty A, et al. An. Unusual Case of Maydl's Hernia. Int J Cur Res Rev. 2013;5(6):22-5. 11. Ganesaratnam M. Maydl's hernia: Report of a Series of Seven Cases and Review of Literature. Brit J Surg. 1985;72:737-8. 12. Weledji EP, Mokake M, Ngowe MN. A Rare. Presentation of Maydl's Hernia.

The halo sign and peripancreatic fluid: useful CT signs of hypovolaemic shock complex in adults

International Nuclear Information System (INIS)

Ryan, M.F.; Hamilton, P.A.; Sarrazin, J.; Chu, P.; Benjaminov, O.; Lam, K.

2005-01-01

AIM: To report two new, useful computed tomography (CT) signs of the hypovolaemic shock complex (HSC) in adults admitted after blunt abdominal trauma: the halo sign (ring of fluid around a collapsed intra-hepatic inferior vena cava (IVC)), and peripancreatic retroperitoneal fluid. MATERIALS AND METHODS: CT images of 498 consecutive patients admitted after blunt abdominal trauma were reviewed, of which 27 had CT signs of the HSC. The CT images of these 27 patients were analysed. A control group of 101 patients examined using CT for suspected blunt abdominal trauma who did not have the HSC were chosen for comparison. RESULTS: The most common features involved the vascular compartment: diminished IVC diameter (n=27), a positive halo sign (n=21); diminished anteroposterior diameter of the aorta (n=13); and abnormal vascular enhancement (n=10). Peripancreatic retroperitoneal fluid in the absence of pancreatic injury, pancreatitis or pancreatic disease was observed in eight patients. Hollow visceral abnormalities included: diffuse increased mucosal enhancement of both the small and large bowel (n=19); diffuse thickening of the small bowel wall (n=11); and small bowel dilatation (n=7). Solid visceral abnormalities included both decreased and or increased enhancement. Several concomitant intra- and extra-abdominal injuries were also identified. CONCLUSION: In the setting of blunt abdominal trauma, early abdominal CT can show diffuse abnormalities due to the HSC, which occasionally may alert clinicians of unsuspected shock. Recognition of these signs as distinguished from injured viscera is important in order to avoid unnecessary laparotomy. Two new signs are described: the halo sign and peripancreatic retroperitoneal fluid

The halo sign and peripancreatic fluid: useful CT signs of hypovolaemic shock complex in adults

Energy Technology Data Exchange (ETDEWEB)

Ryan, M.F.; Hamilton, P.A.; Sarrazin, J.; Chu, P.; Benjaminov, O.; Lam, K

2005-05-01

AIM: To report two new, useful computed tomography (CT) signs of the hypovolaemic shock complex (HSC) in adults admitted after blunt abdominal trauma: the halo sign (ring of fluid around a collapsed intra-hepatic inferior vena cava (IVC)), and peripancreatic retroperitoneal fluid. MATERIALS AND METHODS: CT images of 498 consecutive patients admitted after blunt abdominal trauma were reviewed, of which 27 had CT signs of the HSC. The CT images of these 27 patients were analysed. A control group of 101 patients examined using CT for suspected blunt abdominal trauma who did not have the HSC were chosen for comparison. RESULTS: The most common features involved the vascular compartment: diminished IVC diameter (n=27), a positive halo sign (n=21); diminished anteroposterior diameter of the aorta (n=13); and abnormal vascular enhancement (n=10). Peripancreatic retroperitoneal fluid in the absence of pancreatic injury, pancreatitis or pancreatic disease was observed in eight patients. Hollow visceral abnormalities included: diffuse increased mucosal enhancement of both the small and large bowel (n=19); diffuse thickening of the small bowel wall (n=11); and small bowel dilatation (n=7). Solid visceral abnormalities included both decreased and or increased enhancement. Several concomitant intra- and extra-abdominal injuries were also identified. CONCLUSION: In the setting of blunt abdominal trauma, early abdominal CT can show diffuse abnormalities due to the HSC, which occasionally may alert clinicians of unsuspected shock. Recognition of these signs as distinguished from injured viscera is important in order to avoid unnecessary laparotomy. Two new signs are described: the halo sign and peripancreatic retroperitoneal fluid.

Generating potentially nilpotent full sign patterns

NARCIS (Netherlands)

Kim, I.J.; Olesky, D.D.; Shader, B.L.; Driessche, van den P.; Holst, van der H.; Vander Meulen, K.N.

2009-01-01

A sign pattern is a matrix with entries in {+,-, 0}. A full sign pattern has no zero entries. The refined inertia of a matrix pattern is defined and techniques are developed for constructing potentially nilpotent full sign patterns. Such patterns are spectrally arbitrary. These techniques can also

LHCb: Wrong-Sign to Right-Sign Yield in Flavor Tagged $D^0 \\to K\\pi$ Data at LHCb

CERN Multimedia

Bessner, M

2011-01-01

Initial results on wrong-sign $D^0 \\rightarrow K^+ \\pi^-$ decays based on the 2010 dataset are presented: the selection criteria, the yield, the time-integrated ratio of wrong-sign to right-sign ($D^0 \\rightarrow K^- \\pi^+$) decays, and a decay time acceptance corrected ratio. The corrected ratio is measured to be $R_{acc \\, cor} = (0.409 \\pm 0.031 (stat.) \\pm 0.039 (sys.)) \\%$. This analysis is the first step towards the measurement of the time-dependent wrong-sign/right-sign ratio from which $D^0$ mixing parameters may be extracted.

Clinical study for findings of pneumothoraces on the plain chest film

International Nuclear Information System (INIS)

Saeki, Mitsuaki

1988-01-01

Two hundred and fifty cases of pneumothoraces in intensive care unit in the last seven and half years were reviewed. In intensive care unit, plain chest films are likely to be obtained on supine position that make difficult to diagnose pneumothorax, because of unusual distribution of air in the pleural cavity. In our institution, they were obtained in supine position in 75 %. In our series of 207 supine chest cases, anteromedial and subpulmonic recesses were involved in 11.6 % and 25.6 % respectively. Twenty five cases (12 %) showed unusual location of air. Several radiographic signs have been previously described to recognize this condition. Basilar hyperlucency was most reliable sign (100 %) of detecting subpulmonary pneumothorax. Double diaphragm sign (60 %) and distinct cardiac apex (46.6 %) were also reliable signs. Almost all cases of unusual pneumothoraces were recognized on supine radiographs. However, CT was useful to detect unusual pneumothorax in patient with pneumomediastinum or pulmonary contusion. Unusual pneumothoraces were seen only in traumatized patients. The importance of careful observation of plain chest films to detecte unusual pneumothorax in patients with blunt chest trauma was stressed. (author)

An efficient Trojan delivery of tetrandrine by poly(N-vinylpyrrolidone-block-poly(ε-caprolactone (PVP-b-PCL nanoparticles shows enhanced apoptotic induction of lung cancer cells and inhibition of its migration and invasion

Directory of Open Access Journals (Sweden)

Xu H

2013-12-01

Full Text Available Huae Xu,1,2 Zhibo Hou,3 Hao Zhang,4 Hui Kong,2 Xiaolin Li,4 Hong Wang,2 Weiping Xie21Department of Pharmacy, 2Department of Respiratory Medicine, The First Affiliated Hospital of Nanjing Medical University, Nanjing, People's Republic of China; 3First Department of Respiratory Medicine, Nanjing Chest Hospital, Nanjing, People's Republic of China; 4Department of Geriatric Gastroenterology, The First Affiliated Hospital of Nanjing Medical University, Nanjing, People's Republic of ChinaAbstract: Earlier studies have demonstrated the promising antitumor effect of tetrandrine (Tet against a series of cancers. However, the poor solubility of Tet limits its application, while its hydrophobicity makes Tet a potential model drug for nanodelivery systems. We report on a simple way of preparing drug-loaded nanoparticles formed by amphiphilic poly(N-vinylpyrrolidone-block-poly(ε-caprolactone (PVP-b-PCL copolymers with Tet as a model drug. The mean diameters of Tet-loaded PVP-b-PCL nanoparticles (Tet-NPs were between 110 nm and 125 nm with a negative zeta potential slightly below 0 mV. Tet was incorporated into PVP-b-PCL nanoparticles with high loading efficiency. Different feeding ratios showed different influences on sizes, zeta potentials, and the drug loading efficiencies of Tet-NPs. An in vitro release study shows the sustained release pattern of Tet-NPs. It is shown that the uptake of Tet-NPs is mainly mediated by the endocytosis of nanoparticles, which is more efficient than the filtration of free Tet. Further experiments including fluorescence activated cell sorting and Western blotting indicated that this Trojan strategy of delivering Tet in PVP-b-PCL nanoparticles via endocytosis leads to enhanced induction of apoptosis in the non-small cell lung cancer cell A549 line; enhanced apoptosis is achieved by inhibiting the expression of anti-apoptotic Bcl-2 and Bcl-xL proteins. Moreover, Tet-NPs more efficiently inhibit the ability of cell migration and

NPP unusual events: data, analysis and application

International Nuclear Information System (INIS)

Tolstykh, V.

1990-01-01

Subject of the paper are the IAEA cooperative patterns of unusual events data treatment and utilization of the operating safety experience feedback. The Incident Reporting System (IRS) and the Analysis of Safety Significant Event Team (ASSET) are discussed. The IRS methodology in collection, handling, assessment and dissemination of data on NPP unusual events (deviations, incidents and accidents) occurring during operations, surveillance and maintenance is outlined by the reports gathering and issuing practice, the experts assessment procedures and the parameters of the system. After 7 years of existence the IAEA-IRS contains over 1000 reports and receives 1.5-4% of the total information on unusual events. The author considers the reports only as detailed technical 'records' of events requiring assessment. The ASSET approaches implying an in-depth occurrences analysis directed towards level-1 PSA utilization are commented on. The experts evaluated root causes for the reported events and some trends are presented. Generally, internal events due to unexpected paths of water in the nuclear installations, occurrences related to the integrity of the primary heat transport systems, events associated with the engineered safety systems and events involving human factor represent the large groups deserving close attention. Personal recommendations on how to use the events related information use for NPP safety improvement are given. 2 tabs (R.Ts)

Kinematic parameters of signed verbs.

Science.gov (United States)

Malaia, Evie; Wilbur, Ronnie B; Milkovic, Marina

2013-10-01

Sign language users recruit physical properties of visual motion to convey linguistic information. Research on American Sign Language (ASL) indicates that signers systematically use kinematic features (e.g., velocity, deceleration) of dominant hand motion for distinguishing specific semantic properties of verb classes in production ( Malaia & Wilbur, 2012a) and process these distinctions as part of the phonological structure of these verb classes in comprehension ( Malaia, Ranaweera, Wilbur, & Talavage, 2012). These studies are driven by the event visibility hypothesis by Wilbur (2003), who proposed that such use of kinematic features should be universal to sign language (SL) by the grammaticalization of physics and geometry for linguistic purposes. In a prior motion capture study, Malaia and Wilbur (2012a) lent support for the event visibility hypothesis in ASL, but there has not been quantitative data from other SLs to test the generalization to other languages. The authors investigated the kinematic parameters of predicates in Croatian Sign Language ( Hrvatskom Znakovnom Jeziku [HZJ]). Kinematic features of verb signs were affected both by event structure of the predicate (semantics) and phrase position within the sentence (prosody). The data demonstrate that kinematic features of motion in HZJ verb signs are recruited to convey morphological and prosodic information. This is the first crosslinguistic motion capture confirmation that specific kinematic properties of articulator motion are grammaticalized in other SLs to express linguistic features.

Adaptation of a Vocabulary Test from British Sign Language to American Sign Language

Science.gov (United States)

Mann, Wolfgang; Roy, Penny; Morgan, Gary

2016-01-01

This study describes the adaptation process of a vocabulary knowledge test for British Sign Language (BSL) into American Sign Language (ASL) and presents results from the first round of pilot testing with 20 deaf native ASL signers. The web-based test assesses the strength of deaf children's vocabulary knowledge by means of different mappings of…

Extensive Air Showers with unusual structure

Directory of Open Access Journals (Sweden)

Beznosko Dmitriy

2017-01-01

Full Text Available A total of 23500 Extensive Air Showers (EAS with energies above ∼ 1016 eV have been detected during the ∼3500 hours of the Horizon-T (HT detectors system operations before Aug. 2016. Among these EAS, more than a thousand had an unusual spatial and temporary structure that showed pulses with several maxima (modals or modes from several detection points of the HT at the same time. These modes are separated in time from each other starting from tens to thousands of ns. These EAS have been called multi-modal. Analysis shows that the multi-modal EAS that have been detected by Horizon-T have the following properties: 1. Multi-modal EAS have energy above ∼1017 eV. 2. Pulses with several modes are located at large distances from the EAS axis. An overview of the collected data will be provided. General comments about the unusual structure of the multi-modal EAS will be presented.

An Unusual Case of Cystic Fibrosis Associated Pneumocystis jiroveci Pneumonia in an Infant

Directory of Open Access Journals (Sweden)

Ravinder Kaur

2016-01-01

Full Text Available Pneumocystis jiroveci pneumonia (PJP is one of the major infections in patients with impaired immunity. The entity is common in HIV-seropositive individuals but quite very rare in HIV-seronegative individuals especially children. We report here a case of 16-week-old HIV-seronegative infant with chief complaint of chronic cough of one month of evolution. Sweat chloride test for diagnosis of cystic fibrosis was positive. Bronchoalveolar lavage (BAL fluid was collected and Pseudomonas aeruginosa was isolated on culture. Empirical antibiotic regimen comprising ceftriaxone and azithromycin was initiated that was switched to meropenem as per antimicrobial susceptibility report, but the patient did not improve. Subsequently, an immunofluorescence staining of BAL fluid was performed and P. jiroveci cysts were detected. Following a laboratory confirmation of Pneumocystis pneumonia, cotrimoxazole was added and the clinical condition of the patient significantly improved. This is an unusual case wherein unsuspected PJP occurred and since signs and symptoms of the patient persisted even after the initiation of antimicrobial therapy for Pseudomonas infection and resolved only after treatment for PJP was started, it suggests a causative role of P. jiroveci rather than colonization/contamination.

The Legal Recognition of Sign Languages

Science.gov (United States)

De Meulder, Maartje

2015-01-01

This article provides an analytical overview of the different types of explicit legal recognition of sign languages. Five categories are distinguished: constitutional recognition, recognition by means of general language legislation, recognition by means of a sign language law or act, recognition by means of a sign language law or act including…

Visual cortex entrains to sign language.

Science.gov (United States)

Brookshire, Geoffrey; Lu, Jenny; Nusbaum, Howard C; Goldin-Meadow, Susan; Casasanto, Daniel

2017-06-13

Despite immense variability across languages, people can learn to understand any human language, spoken or signed. What neural mechanisms allow people to comprehend language across sensory modalities? When people listen to speech, electrophysiological oscillations in auditory cortex entrain to slow ([Formula: see text]8 Hz) fluctuations in the acoustic envelope. Entrainment to the speech envelope may reflect mechanisms specialized for auditory perception. Alternatively, flexible entrainment may be a general-purpose cortical mechanism that optimizes sensitivity to rhythmic information regardless of modality. Here, we test these proposals by examining cortical coherence to visual information in sign language. First, we develop a metric to quantify visual change over time. We find quasiperiodic fluctuations in sign language, characterized by lower frequencies than fluctuations in speech. Next, we test for entrainment of neural oscillations to visual change in sign language, using electroencephalography (EEG) in fluent speakers of American Sign Language (ASL) as they watch videos in ASL. We find significant cortical entrainment to visual oscillations in sign language sign is strongest over occipital and parietal cortex, in contrast to speech, where coherence is strongest over the auditory cortex. Nonsigners also show coherence to sign language, but entrainment at frontal sites is reduced relative to fluent signers. These results demonstrate that flexible cortical entrainment to language does not depend on neural processes that are specific to auditory speech perception. Low-frequency oscillatory entrainment may reflect a general cortical mechanism that maximizes sensitivity to informational peaks in time-varying signals.

Analysis of factors temporarily impacting traffic sign readability

Directory of Open Access Journals (Sweden)

Majid Khalilikhah

2016-10-01

Full Text Available Traffic sign readability can be affected by the existence of dirt on traffic sign faces. However, among damaged signs, dirty traffic signs are unique since their damage is not permanent and they just can be cleaned instead of replaced. This study aimed to identify the most important factors contributing to traffic sign dirt. To do so, a large number of traffic signs in Utah were measured by deploying a vehicle instrumented with mobile LiDAR imaging and digital photolog technologies. Each individual daytime digital image was inspected for dirt. Location and climate observations obtained from official sources were compiled using ArcGIS throughout the process. To identify contributing factors to traffic sign dirt, the chi-square test was employed. To analyze the data and rank all of the factors based on their importance to the sign dirt, Random forests statistical model was utilized. After analyzing the data, it can be concluded that ground elevation, sign mount height, and air pollution had the highest effect on making traffic signs dirty. The findings of this investigation assist transportation agencies in determining traffic signs with a higher likelihood of sign dirt. In this way, agencies would schedule to clean such traffic signs more frequently.

Nanocomposites Based on PCL and Halloysite Nanotubes Filled with Lysozyme: Effect of Draw Ratio on the Physical Properties and Release Analysis

Directory of Open Access Journals (Sweden)

Valeria Bugatti

2017-08-01

Full Text Available Halloysite nanotubes (HNTs were loaded with lsozyme, as antimicrobial molecule, at a HNTs/lysozyme ratio of 1:1. Such a nano-hybrid was incorporated into a poly (ε-caprolactone (PCL matrix at 10 wt % and films were obtained. The nano-composites were submitted to a cold drawn process at three different draw ratios, λ = 3, 4, and 5, where λ is l(final length/l0(initial length. Morphology, physical, and barrier properties of the starting nanocomposite and drawn samples were studied, and correlated to the release of the lysozyme molecule. It was demonstrated that with a simple mechanical treatment it is possible to obtain controlled release systems for specific active packaging requirements.

Useful radiologic sign in diagnosis of peripheral lung cancer: Nucleohalo sign and its pathologic basis

International Nuclear Information System (INIS)

Wang, H.; Shi, D.

1994-01-01

The authors investigated the x-ray findings of 117 patients with peripheral lung cancer proved by operation and pathology, of them 35(29.9%) cases were found to have the 'nucleohalo sign', 6(13.6%) in 44 cases of solitary metastatic lung cancers, but none in 167 cases of benign lung nodular lesions and 4 cases of primary lung sarcoma and lymphoma. Radiologic and pathologic correlative study of the nucleohalo sign with surgical specimens of 14 lung cancers suggested that the cancerous parenchymas in nuclear areas were more than the interstitices in 12 cases and the other 2 were equal in both parenchymas and interstitices. Instead, the cancerous parenchymas in halo areas were less than cancerous interstitices in all cases. Dynamic observation of the 'nucleohalo sign' showed that this sign was an appearance of a stage in cancer growth. It is considered a very important sign in x-ray diagnosis of peripheral lung cancer, especially in the early diagnosis of lung cancer under or equal to 3 cm in diameter

Unusual Cancers of the Head and Neck

Science.gov (United States)

... more information). Unusual Cancers of the Head and Neck Nasopharyngeal Cancer See the PDQ summary on Childhood ... of PDQ documents can be used freely as text. It cannot be identified as an NCI PDQ ...

Hemorrhagic pleural effusion secondary to an unusual type III hiatal hernia in a 4-year-old great dane.

Science.gov (United States)

Gordon, Lena C; Friend, Edward J; Hamilton, Michael H

2010-01-01

An unusual case of combined axial and paraesophageal (type III) hiatal hernia (HH) in a 4-year-old Great Dane is reported. The main presenting complaint was dyspnea, and no history of trauma was present. A tentative diagnosis of HH with secondary pleural effusion was made based on clinical signs and radiographic findings. Exploratory celiotomy revealed herniation of the gastric cardia, fundus, and body through the esophageal hiatus and an adjacent, distinct defect in the diaphragm. Rupture of the short gastric vessels lead to the formation of a hemorrhagic pleural effusion that impaired ventilation. The esophageal hiatus was surgically reduced in size, and the second defect was closed with nonabsorbable sutures. Esophagopexy and tube gastropexy procedures were also performed. The dog was clinically normal 9 months postoperatively. This type of HH is not currently defined within the traditional classification system and to the authors' knowledge has not been previously reported.

Study on road sign recognition in LabVIEW

Science.gov (United States)

Panoiu, M.; Rat, C. L.; Panoiu, C.

2016-02-01

Road and traffic sign identification is a field of study that can be used to aid the development of in-car advisory systems. It uses computer vision and artificial intelligence to extract the road signs from outdoor images acquired by a camera in uncontrolled lighting conditions where they may be occluded by other objects, or may suffer from problems such as color fading, disorientation, variations in shape and size, etc. An automatic means of identifying traffic signs, in these conditions, can make a significant contribution to develop an Intelligent Transport Systems (ITS) that continuously monitors the driver, the vehicle, and the road. Road and traffic signs are characterized by a number of features which make them recognizable from the environment. Road signs are located in standard positions and have standard shapes, standard colors, and known pictograms. These characteristics make them suitable for image identification. Traffic sign identification covers two problems: traffic sign detection and traffic sign recognition. Traffic sign detection is meant for the accurate localization of traffic signs in the image space, while traffic sign recognition handles the labeling of such detections into specific traffic sign types or subcategories [1].

The sign language skills classroom observation: a process for describing sign language proficiency in classroom settings.

Science.gov (United States)

Reeves, J B; Newell, W; Holcomb, B R; Stinson, M

2000-10-01

In collaboration with teachers and students at the National Technical Institute for the Deaf (NTID), the Sign Language Skills Classroom Observation (SLSCO) was designed to provide feedback to teachers on their sign language communication skills in the classroom. In the present article, the impetus and rationale for development of the SLSCO is discussed. Previous studies related to classroom signing and observation methodology are reviewed. The procedure for developing the SLSCO is then described. This procedure included (a) interviews with faculty and students at NTID, (b) identification of linguistic features of sign language important for conveying content to deaf students, (c) development of forms for recording observations of classroom signing, (d) analysis of use of the forms, (e) development of a protocol for conducting the SLSCO, and (f) piloting of the SLSCO in classrooms. The results of use of the SLSCO with NTID faculty during a trial year are summarized.

Unusual presentation of perirenal lung metastases

International Nuclear Information System (INIS)

D'Souza, D.L.; Heinze, S.B.; Dowling, R.J.

2006-01-01

Lung cancer is not commonly known to metastasise to the perirenal space, with only five such cases previously published. We present an unusual case of perirenal lung metastases manifesting as diffuse perinephric stranding which to our knowledge has not been described before Copyright (2006) Blackwell Publishing Asia Pty Ltd

Comparison of epithelial and fibroblastic cell behavior on nano/micro-topographic PCL membranes produced by crystallinity control.

Science.gov (United States)

Gümüşderelioğlu, Menemşe; Kaya, F Betül; Beşkardeş, Işıl Gerçek

2011-06-15

In this study, the relationship between the cellular morphology and the material surface topography was investigated. Poly(ε-caprolactone) (PCL) membranes were prepared in a wide range of surface wettabilities by means of crystallinity-controlled solvent casting process. Membrane surfaces were characterized by atomic force microscope (AFM), scanning electron microscope (SEM), and static/dynamic water contact angle measurements. It was found that solvent evaporation and non-solvent (methanol) addition to the solvent (THF) are the most decisive parameters to change the surface topography. The non-solvent addition and the decrease in solvent evaporation temperature from room temperature to -20 °C caused increased polymeric chain mobility and crystallization time. Such changes in crystallization parameters led to the formation of micro/nano-sized features on the membrane. Cell culture studies indicated that in contrast to Madin Darby kidney (MDBK) epithelial cells, L929 mouse fibroblast preferred rough and porous surfaces. Copyright © 2011 Elsevier Inc. All rights reserved.

Repetitions in French Belgian Sign Language (LSFB) and Flemish Sign Language (VGT) narratives and conversations

OpenAIRE

Notarrigo, Ingrid; Meurant, Laurence; Van Herreweghe, Mieke; Vermeerbergen, Myriam

2016-01-01

Repetition was described in the nineties by a limited number of sign linguists: Vermeerbergen & De Vriendt (1994) looked at a small corpus of VGT data, Fisher & Janis (1990) analysed “verb sandwiches” in ASL and Pinsonneault (1994) “verb echos” in Quebec Sign Language. More recently the same phenomenon has been the focus of research in a growing number of signed languages, including American (Nunes and de Quadros 2008), Hong Kong (Sze 2008), Russian (Shamaro 2008), Polish (Flilipczak and Most...

Electronic structure of C28, Pa at sign C28, and U at sign C28

International Nuclear Information System (INIS)

Zhao, K.; Pitzer, R.M.

1996-01-01

Electronic structure calculations, including relativistic core potentials and the spin-orbit interaction, have been carried out on the C 28 , Pa at sign C 28 , and U at sign C 28 species. Excitation energies, spin-orbit splittings, the electron affinity, and the ionization potential are computed for C 28 . The ground state of C 28 is described well by the Hartree-Fock wave functions, but other states are not. The computed electron affinity and ionization potential are similar to those of C 60 . Strong metal-cage binding is found for Pa at sign C 28 and U at sign C 28 , similar to that in U(C 8 H 8 ) 2 . The ground electronic states depend on the order of the lowest-energy cage π * and metal 5f orbitals, with (π * ) 1 and (π * ) 1 (5f) 1 found to be the ground electronic configurations for the two complexes. U at sign C 28 is found to be diamagnetic. 30 refs., 1 fig., 13 tabs

Enhanced Radiosensitization Effect of Curcumin Delivered by PVP-PCL Nanoparticle in Lung Cancer

Directory of Open Access Journals (Sweden)

Cuixia Wen

2017-01-01

Full Text Available Curcumin, the principal polyphenolic curcuminoid, has been reported in numerous studies for its antitumor effect in a series of cancers. It is also reported that curcumin possesses radiosensitization effect in some cancers. However, the poor solubility and unsatisfied bioavailability of curcumin significantly undermine its potential application. Here we prepared curcumin loaded nanoparticles by employing PVP-PCL as drug carrier. Characterization studies indicated the satisfied drug loading efficiency and a sustained in vitro release pattern. Quantification uptake study showed that the uptake efficiency of Cum-NPs by lung cancer cells was time- and dose-dependent. In vitro anticancer study demonstrated the superior cytotoxic effect of Cum-NPs with stronger apoptotic induction over free Cum. Most importantly, there is almost no report on the radiosensitization effect of curcumin loaded nanoparticles. Here, Cum-NPs led to more inhibition of the colony forming ability of A549 cells as compared to the equivalent concentration of free Cum as shown in clonogenic assay. Furthermore, Cum-NPs are much more effective in enhancing the tumor growth inhibitory effect of radiation therapy in a A549 xenograft model. Therefore, results from the current study seem to be the first report on the radiosensitization effect of Cum-NPs and paved the way for a curcumin nanodrug delivery system as a potential radiation adjuvant.

salmonella typhi spondyutis: an unusual presentation

African Journals Online (AJOL)

It was relieved by lying flat. She had pre- viously been admitted to King Edward VIII Hospital in. May 1969 with a cough, chest and abdominal pain, ... foot and cranium may be the sites of skeletal involvement. Our case shows several unusual features. Sickle-cell anaemia and haemoglobinopathy were absent. Although.

Unusual Cutaneous Manifestation of Tuberous Sclerosis

Directory of Open Access Journals (Sweden)

K C Shah

1980-01-01

Full Text Available Cutaneous manifestations are found in 60 to 70% cases of tuberous sclerosis and consist of adenoma sebaceum, periungual fibromatas, cafe au lait spots, shagreen patches and white macules. Our patient showed unusual skin manifestations like spotty pigmentation on the chest, back and abdomen and hyperkeratosis palmaris et plantaris.

Eigen-Gradients for Traffic Sign Recognition

Directory of Open Access Journals (Sweden)

Sheila Esmeralda Gonzalez-Reyna

2013-01-01

Full Text Available Traffic sign detection and recognition systems include a variety of applications like autonomous driving, road sign inventory, and driver support systems. Machine learning algorithms provide useful tools for traffic sign identification tasks. However, classification algorithms depend on the preprocessing stage to obtain high accuracy rates. This paper proposes a road sign characterization method based on oriented gradient maps and the Karhunen-Loeve transform in order to improve classification performance. Dimensionality reduction may be important for portable applications on resource constrained devices like FPGAs; therefore, our approach focuses on achieving a good classification accuracy by using a reduced amount of attributes compared to some state-of-the-art methods. The proposed method was tested using German Traffic Sign Recognition Benchmark, reaching a dimensionality reduction of 99.3% and a classification accuracy of 95.9% with a Multi-Layer Perceptron.

An Unusual Metastasis of a Transglottic Squamous Cell Carcinoma to the Forearm

Directory of Open Access Journals (Sweden)

Abdullah Dafir Albeyatti

2013-01-01

Full Text Available Introduction. Each year around 2,200 people in the UK are diagnosed with laryngeal SCC (Office of National Statistics 2009. Compared to pharyngeal carcinoma, it is a highly curable disease with a survival rate of around 60% for all stages and all forms of treatment. Case Presentation. We present the case of a 60-year-old man with a previously treated T4 N2c transglottic squamous cell carcinoma (SCC, who developed an isolated swelling in the extensor compartment of his right forearm at 6 months after radical laryngectomy with bilateral neck dissection. Fine needle aspiration of the forearm lesion revealed SCC consistent with a metastasis from the laryngeal primary. MRI revealed that the lesion was confined to the muscle. Initial staging CT showed no distant metastases or signs of advanced disease, including no evidence of axillary nodal involvement. Conclusion. This case is therefore unusual, as one of only 2 cases reported in the scientific literature of isolated distant muscular metastasis from a laryngeal squamous cell carcinoma. We conclude that any muscular swelling, in the setting of previous head and neck malignancy, should be treated with a high degree of suspicion for metastasis and investigated promptly.

Approaching Sign Language Test Construction: Adaptation of the German Sign Language Receptive Skills Test

Science.gov (United States)

Haug, Tobias

2011-01-01

There is a current need for reliable and valid test instruments in different countries in order to monitor deaf children's sign language acquisition. However, very few tests are commercially available that offer strong evidence for their psychometric properties. A German Sign Language (DGS) test focusing on linguistic structures that are acquired…

Unusual causes of mechanical small bowel obstruction

International Nuclear Information System (INIS)

Shatnawi, Nawaf J.; Bani-Hani, Kamal E.

2005-01-01

We herein report our experience regarding unusual causes of bowel obstruction to increase the awareness of surgeons regarding this disease. From 1991 to 2003, we had experience at the University affiliated hospitals, northern Jordan with 24 patients with small bowel obstruction resulting from unusual causes. We retrospectively reviewed the medical records of these patients with regards to the mode of presentation, cause of obstruction, radiological and operative findings, management and outcome. We recorded 15 patients who underwent previous abdominal surgery. Preoperative diagnosis was correct in only one patient with an internal hernia, but the abdominal CT scan suggested the diagnosis in 5 of the 9 patients who had the scan. The final diagnosis was internal hernias in 11 patients, foreign bodies in 5, ischemic strictures in 3, carcinoid tumors in 2, endometriosis in 2, and metastatic deposit from interstitial bladder carcinoma in one patient. Nine of the 12 patients with recurrent obstruction had either short course or recurrence obstruction during the same hospital admission. W carried out bowel resections in 15 patients (5 resections were due to bowel strangulation). Post operative death occurred in 4 patients. Awareness of these rare causes of intestinal obstruction even in patients with previous abdominal operation might improve the outcome. The tentative diagnosis of adhesion obstruction in patients with unusual obstructive etiology might lead to a higher rate of gangrenous complications. Rigorous preoperative evaluation including careful history and early abdominal CT may show the obstructive cause. (author)

The role of syllables in sign language production.

Science.gov (United States)

Baus, Cristina; Gutiérrez, Eva; Carreiras, Manuel

2014-01-01

The aim of the present study was to investigate the functional role of syllables in sign language and how the different phonological combinations influence sign production. Moreover, the influence of age of acquisition was evaluated. Deaf signers (native and non-native) of Catalan Signed Language (LSC) were asked in a picture-sign interference task to sign picture names while ignoring distractor-signs with which they shared two phonological parameters (out of three of the main sign parameters: Location, Movement, and Handshape). The results revealed a different impact of the three phonological combinations. While no effect was observed for the phonological combination Handshape-Location, the combination Handshape-Movement slowed down signing latencies, but only in the non-native group. A facilitatory effect was observed for both groups when pictures and distractors shared Location-Movement. Importantly, linguistic models have considered this phonological combination to be a privileged unit in the composition of signs, as syllables are in spoken languages. Thus, our results support the functional role of syllable units during phonological articulation in sign language production.

Extensive theoretical study on the excited states of the PCl+ molecule including spin-orbit coupling

Science.gov (United States)

Zhang, Xiaomei; Zhai, Hongsheng; Liu, Siyuan; Liu, Yufang

2017-07-01

The entire 23 Λ-S states of the PCl+ molecule have been studied by using the high-level relativistic MRCI+Q method with full-electron aug-cc-pCVQZ-DK basis set. The potential energy curves(PECs) and wavefunctions of the states have been calculated. From the PECs, the spectroscopic constants of the bound states are also determined, and the good agreements could be found with the experiments. The high density region of states exhibits many PECs' crossings, which lead to complicated interaction of the states. Here, the interactions arising from the dipolar interaction and spin-orbit coupling (SOC) effect have been discussed in detail. Under the influence of the SOC effect, the A2Π state is perturbed by the 14Σ- state. Considering the SOC effect, total 45 Ω states are generated from the original 23 Λ-S states. The transition properties are also predicted, including the transition dipole moments, Franck-Condon factors, and radiative lifetimes. The lifetimes of the transitions A2Π1/2-X2Π1/2 and A2Π3/2-X2Π3/2 are determined to be 478.9 ns and 487.0 ns(v'=0), respectively.

Magnetic vortex excitation as spin torque oscillator and its unusual trajectories

Science.gov (United States)

Natarajan, Kanimozhi; Muthuraj, Ponsudana; Rajamani, Amuda; Arumugam, Brinda

2018-05-01

We report an interesting observation of unusual trajectories of vortex core oscillations in a spin valve pillar. Micromagnetic simulation in the composite free layer spin valve nano-pillar shows magnetic vortex excitation under critical current density. When current density is slightly increased and wave vector is properly tuned, for the first time we observe a star like and square gyration. Surprisingly this star like and square gyration also leads to steady, coherent and sustained oscillations. Moreover, the frequency of gyration is also very high for this unusual trajectories. The power spectral analysis reveals that there is a marked increase in output power and frequency with less distortions. Our investigation explores the possibility of these unusual trajectories to exhibit spin torque oscillations.

Integrated sign management system : ADOT maintenance group

Science.gov (United States)

2003-12-01

The Arizona Department of Transportation (ADOT) maintains and manages an inventory of roadway signs. Before the implementation of this project, sign technicians maintained inventory records on individual laptops to track their daily sign maintenance ...

No Laughing Matter: Gelastic Migraine and Other Unusual Headache Syndromes.

Science.gov (United States)

Mathew, Paul G; Robertson, Carrie E

2016-05-01

Primary and secondary headache disorders have established diagnostic criteria in the International Classification of Headache Disorders IIIb, as well as classic findings, which although not part of the formal criteria are often suggestive of a particular diagnosis. At times, headache disorders can involve unusual symptoms that lack an identifiable secondary cause. This review will discuss some of these unusual symptoms, including headache associated auditory and olfactory symptoms, as well as two case reports involving gelastic migraine and migrainous thoracalgia.

Inventário de Psicopatia de Hare Versão Jovens (PCL:YV: Estudo Preliminar em Amostra Adolescente Brasileira

Directory of Open Access Journals (Sweden)

Ramiro Ronchetti

2010-01-01

Full Text Available This paper presents the preliminary study of the Hare Psychopathy Checklist: Youth Version (PCL:YV reliability developed with 20 male Brazilian adolescents offenders. They had between 16 and 17 years old medium age and were confined in a facility in the metropolitan area of Porto Alegre, the southernmost state capital in the country. A questionnaire with social and demographic data and a semi-structured interview were filled out. Collateral information was also obtained with the monitors of the facility where the research was performed. The results showed a high index of inter-evaluator reliability (W=0.93; p <0.001 in this sample. These findings suggest the continuation of the studies in order of generalizing the findings as well as to give continuity to the process of instrument validation in the Brazilian context.

Segmentation of British Sign Language (BSL): Mind the gap!

OpenAIRE

Orfanidou, E.; McQueen, J.; Adam, R.; Morgan, G.

2015-01-01

This study asks how users of British Sign Language (BSL) recognize individual signs in connected sign sequences. We examined whether this is achieved through modality-specific or modality-general segmentation procedures. A modality-specific feature of signed languages is that, during continuous signing, there are salient transitions between sign locations. We used the sign-spotting task to ask if and how BSL signers use these transitions in segmentation. A total of 96 real BSL signs were prec...

A CONTRASTIVE ANALYSIS OF THE FACTORIAL STRUCTURE OF THE PCL-R: WHICH MODEL FITS BEST THE DATA?

Directory of Open Access Journals (Sweden)

Beatriz Pérez

2015-01-01

Full Text Available The aim of this study was to determine which of the factorial solutions proposed for the Hare Psychopathy Checklist-Revised (PCL-R of two, three, four factors, and unidimensional fitted best the data. Two trained and experienced independent raters scored 197 prisoners from the Villabona Penitentiary (Asturias, Spain, age range 21 to 73 years (M = 36.0, SD = 9.7, of whom 60.12% were reoffenders and 73% had committed violent crimes. The results revealed that the two-factor correlational, three-factor hierarchical without testlets, four-factor correlational and hierarchical, and unidimensional models were a poor fit for the data (CFI ≤ .86, and the three-factor model with testlets was a reasonable fit for the data (CFI = .93. The scale resulting from the three-factor hierarchical model with testlets (13 items classified psychopathy significantly higher than the original 20-item scale. The results are discussed in terms of their implications for theoretical models of psychopathy, decision-making, prison classification and intervention, and prevention. Se diseñó un estudio con el objetivo de conocer cuál de las soluciones factoriales propuestas para la Hare Psychopathy Checklist-Revised (PCL-R de dos, tres y cuatro factores y unidimensional era la que presentaba mejor ajuste a los datos. Para ello, dos evaluadores entrenados y con experiencia evaluaron de forma independiente a 197 internos en la prisión Villabona (Asturias, España, con edades comprendidas entre los 21 y los 73 años (M = 36.0, DT = 9.7, de los cuales el 60.12% eran reincidentes y el 73% había cometido delitos violentos. Los resultados mostraron que los modelos unidimensional, correlacional de 2 factores, jerárquico de 3 factores sin testlest y correlacional y jerárquico de 4 factores, presentaban un pobre ajuste con los datos (CFI ≤ .86 y un ajuste razonable del modelo jerárquico de tres factores con testlets (CFI = .93. La escala resultante del modelo de tres factores

Electronic traffic signs: The interplay between hybrid and full matrix e-signs

Energy Technology Data Exchange (ETDEWEB)

Lucas-Alba, A.; Hernando Mazon, A.; Blanch Mico, A.M.; Gutierrez Perez, D.; Echeverria Villaspi, J.I.; Landa Tejero-Garces, N.

2016-07-01

Road signs constitute a complex and growing communication system where different elements (pictograms, shapes, texts, etc.) are combined following different strategies. In this paper we have confronted drivers with a number of messages (congestion or road works, before, between, after location/s) developed as an adaptation of Advance Location Signs (class G, 1c in the 1968 Convention) to electronic displays. We manipulate two main factors a) the reading strategy (top-down vs. bottom-up) and the type of matrix display (hybrid, dissociating pictogram and text, vs. full matrix), in a repeated measures experimental design. The time taken to answer and the response given (correct, incorrect) was measured for each of the 24 message-blocks. Results show that the organization of the elements displayed is a key determinant for driver comprehension. Further thoughts on the need to understand the interplay between the formats adopted by static vs electronic message signs are provided. (Author)

Unusual Metastases in Renal Cell Carcinoma: A Single Institution Experience and Review of Literature

Science.gov (United States)

Villarreal-Garza, Cynthia; Perez-Alvarez, Sandra I.; Gonzalez-Espinoza, Ivan R.; Leon-Rodriguez, Eucario

2010-01-01

Background To report location and management of atypical metastases from renal cell carcinoma (RCC) in the Instituto Nacional de Ciencias Medicas e Investigacion Salvador Zubiran (INCMNSZ) in Mexico City. Methods Between 1987 to 2009, 545 patients with RCC were retrospectively identified at the INCMNSZ. Patients with unusual metastases confirmed by histopathology were analyzed. Epidemiological, clinical, diagnosis, treatment and outcome data were reviewed. Results Sixty patients developed 98 unusual metastases secondary to RCC. The group was comprised of 35 men (58.3%), with a median age of 60 years at diagnosis. Metachronous unusual metastases with primary renal cancer were observed in 37 individuals (61.7%). Median time from primary RCC diagnosis to the first unusual metastasis was 16.5 months. Median survival from diagnosis of the first unusual metastasis to death was 5.0 months (CI 95%: 2.8-7.2 months). Patients with an initial solitary metastatic lesion in an unusual site (28.3%) had a better survival compared to patients who primarily presented with multiple metastases, 17.0 (CI 95%: 6.1-27.9) Vs 3.0 months (CI 95%: 0.9-5.1), p = 0.001. Unusual metastasis resection (21 patients) improved survival, 25.0 (CI 95%: 5.1-44.9) Vs 3.0 months (CI 95%: 0.8-5.2), p < 0.0001. No survival difference was observed between localization of unsual metastases (p = 0.72). Conclusions In patients with advanced RCC we suggest an individual diagnostic and surgical approach to achieve complete resection with disease-free margins, even in the presence of unusual metastatic sites, multifocality, or history of metastasectomy. These strategy might provide not only palliation for symptoms, but an opportunity for meaningful disease free and overall survival. PMID:29147198

A Comparative Study of Bio artificial Bone Tissue Poly-L-lactic Acid/Polycaprolactone and PLLA Scaffolds Applied in Bone Regeneration

International Nuclear Information System (INIS)

Weng, W.; Song, Sh.; Cao, L.; Chen, X.; Cai, Y.; Li, H.; Zhou, Q.; Zhang, J.; Su, J.

2014-01-01

Bio artificial bone tissue engineering is an increasingly popular technique to repair bone defect caused by injury or disease. This study aimed to investigate the feasibility of PLLA/PCL (poly-L-lactic acid/polycaprolactone) by a comparison study of PLLA/PCL and PLLA scaffolds applied in bone regeneration. Thirty healthy mature New Zealand rabbits on which 15 mm distal ulna defect model had been established were selected and then were divided into three groups randomly: group A (repaired with PLLA scaffold), group B (repaired with PLLA/PCL scaffold), and group C (no scaffold) to evaluate the bone-remodeling ability of the implants. Micro-CT examination revealed the prime bone regeneration ability of group B in three groups. Bone mineral density of surgical site in group B was higher than group A but lower than group C. Meanwhile, the bone regeneration in both groups A and B proceeded with signs of inflammation for the initial fast degradation of scaffolds. As a whole, PLLA/PCL scaffolds in vivo initially degrade fast and were better suited to repair bone defect than PLLA in New Zealand rabbits. Furthermore, for the low mineral density of new bone and rapid degradation of the scaffolds, more researches were necessary to optimize the composite for bone regeneration.

Normothermic thyroid storm: an unusual presentation

Science.gov (United States)

Sabir, Anas Ahmad; Sada, Kabiru; Yusuf, Bashir O.; Aliyu, Idris

2016-01-01

Thyroid storm is a rare life-threatening emergency due to thyrotoxicosis. A 30-year-old female presented with restlessness, tachycardia and vomiting but with normothermia which is an unusual presentation. There is the need for clinicians to be aware of atypical clinical features that can make the diagnosis of thyroid storm difficult. PMID:27540465

Issues in Sign Language Lexicography

DEFF Research Database (Denmark)

Zwitserlood, Inge; Kristoffersen, Jette Hedegaard; Troelsgård, Thomas

2013-01-01

ge lexicography has thus far been a relatively obscure area in the world of lexicography. Therefore, this article will contain background information on signed languages and the communities in which they are used, on the lexicography of sign languages, the situation in the Netherlands as well...

Learning to Detect Traffic Signs

DEFF Research Database (Denmark)

Møgelmose, Andreas; Trivedi, Mohan M.; Moeslund, Thomas B.

2012-01-01

This study compares the performance of sign detection based on synthetic training data to the performance of detection based on real-world training images. Viola-Jones detectors are created for 4 different traffic signs with both synthetic and real data, and varying numbers of training samples. T...

Concise Lexicon for Sign Linguistics

NARCIS (Netherlands)

dr. Jan Nijen Twilhaar; Dr. Beppie van den Bogaerde

2016-01-01

This extensive, well-researched and clearly formatted lexicon of a wide variety of linguistic terms is a long overdue. It is an extremely welcome addition to the bookshelves of sign language teachers, interpreters, linguists, learners and other sign language users, and of course of the Deaf

«Existe-t-il des signes visuels?» Rivisitazione del Traité du signe visueldel Groupe μ

Directory of Open Access Journals (Sweden)

Michele Amadò

2008-06-01

Full Text Available In order to develop its great potential, visual communication needs to be founded on the characteristics of the visual channel and on the typologies of the visual signs (iconic and plastic, therefore, on a specific semiotic and rhetoric distinct from the ones of the linguistic sign. Visual signs, in particular the noblest expressions like the artistic ones, reveal themselves more as aims rather than as means. They do not point away from themselves but to themselves: this connotation is founded on the autonomy of visual signs as regards the reported reality. The respective itineraries can emphasize the possibilities and inherent to a visually constructed logic with nonverbal characteristics.

Signs of Resistance: Peer Learning of Sign Languages within "Oral" Schools for the Deaf

Science.gov (United States)

Anglin-Jaffe, Hannah

2013-01-01

This article explores the role of the Deaf child as peer educator. In schools where sign languages were banned, Deaf children became the educators of their Deaf peers in a number of contexts worldwide. This paper analyses how this peer education of sign language worked in context by drawing on two examples from boarding schools for the deaf in…

Parkinsonian signs are a risk factor for falls.

Science.gov (United States)

Dahodwala, Nabila; Nwadiogbu, Chinwe; Fitts, Whitney; Partridge, Helen; Karlawish, Jason

2017-06-01

Parkinsonian signs are common, non-specific findings in older adults and associated with increased rates of dementia and mortality. It is important to understand which motor outcomes are associated with parkinsonian signs. To determine the role of parkinsonian signs on fall rates among older adults. We conducted a longitudinal study of primary care patients from the University of Pennsylvania Health System. Adults over 55 years were assessed at baseline through surveys and a neurological examination. We recorded falls over the following 2 years. Parkinsonian signs were defined as the presence of 2 of 4 cardinal signs. Incident falls were compared between subjects with and without parkinsonian signs, and modified Poisson regression used to adjust for potential confounders in the relationship between parkinsonian signs and falls. 982 subjects with a mean age of 68 (s.d. 8.8) years participated. 29% of participants fell and 12% exhibited parkinsonian signs at baseline. The unadjusted RR for falls among individuals with parkinsonian signs was 1.36 (95% CI 1.05-1.76, p=0.02). After adjusting for age, cognitive function, urinary incontinence, depression, diabetes, stroke and arthritis, individuals with parkinsonian signs were still 38% more likely to fall than those without parkinsonian signs (RR 1.38, 95% CI 1.04-1.82; p=0.03). Falls among those with parkinsonian signs were more likely to lead to injury (53% vs 37%; p=0.04). Parkinsonian signs are a significant, independent risk factor for falls. Early detection of this clinical state is important in order to implement fall prevention programs among primary care patients. Copyright © 2017 Elsevier B.V. All rights reserved.

Traffic signs recognition for driving assistance

Science.gov (United States)

Sai Sangram Reddy, Yatham; Karthik, Devareddy; Rana, Nikunj; Jasmine Pemeena Priyadarsini, M.; Rajini, G. K.; Naseera, Shaik

2017-11-01

In the current circumstances with the innovative headway, we must be able to provide assistance to the driving in recognising the traffic signs on the roads. At present time, many reviews are being directed moving in the direction of the usage of a keen Traffic Systems. One field of this exploration is driving support systems, and many reviews are being directed to create frameworks which distinguish and perceive street signs in front of the vehicle, and afterward utilize the data to advise the driver or to even control the vehicle by implementing this system on self-driving vehicles. In this paper we propose a method to detect the traffic sign board in a frame using HAAR cascading and then identifying the sign on it. The output may be either given out in voice or can be displayed as per the driver’s convenience. Each of the Traffic Sign is recognised using a database of images of symbols used to train the KNN classifier using open CV libraries.

Abdominal X-ray signs of intra-intestinal drug smuggling.

Science.gov (United States)

Niewiarowski, Sylwia; Gogbashian, Andrew; Afaq, Asim; Kantor, Robin; Win, Zarni

2010-05-01

"Body packers" either swallow or insert drug filled packets rectally or vaginally in order to smuggle illicit drugs. AXR is used routinely to screen suspects for the presence of intra-intestinal drug packages. AXR diagnosis can be difficult as stool or gas within the intestine may resemble ingested foreign bodies. We identify the frequency and co-existence of several signs; tic-tac sign, rosette sign, double condom sign, dense surrounding material, density and discover a new sign; parallelism, which will aid in increasing the radiological accuracy. We retrospectively reviewed 285 AXRs performed for suspicion of drug smuggling during the period of March 2006-March 2009 to identify the frequency of these signs. Of the 285 AXRs performed 59 were positive, 221 negative and five were indeterminate. The tic-tac sign was present in 93%, double condom sign in 73%, dense surrounding wrapping material in 36% and parallelism in 27%. Sixty one percentage of drug packages were iso-dense to faeces and 39% hyperdense. Twenty percentage of the positive abdominal radiographs demonstrated one of the radiographic signs, 39% demonstrated two signs, 32% demonstrated three and 7% four. The most common radiographic sign combination was the tic-tac sign with either dense surrounding material or double condom sign. The most commonly encountered radiographic sign is the tic-tac sign, followed by the double condom sign and dense surrounding material. We also discover a new sign, "parallelism" which although uncommon is highly specific. Accuracy is further increased by comparing the density of packages to faeces and looking for the co-existence of multiple signs. Copyright (c) 2010 Elsevier Ltd and Faculty of Forensic and Legal Medicine. All rights reserved.

The unusual practices within some Neo-Pentecostal churches in South Africa: Reflections and recommendations

Directory of Open Access Journals (Sweden)

Mookgo S. Kgatle

2017-09-01

Full Text Available This article reflects and makes recommendations on the recent unusual practices within some Neo-Pentecostal churches in South Africa. Neo-Pentecostal churches in South Africa refer to churches that have crossed denominational boundaries. These churches idolise the miraculous, healing, deliverance and enactment of bizarre church performances often performed by charismatic and highly influential spiritual leaders. There have been unusual practices within some Neo-Pentecostal churches that include, among others, the eating of grass, eating of snakes, drinking of petrol, spraying of Doom on the congregants and other experiences. There are many possible theological, psychological and socio-economic explanations for these unusual practices. Given the facts that many South Africans experience various socio-economic challenges, it is argued here that the socio-economic factor is the main explanation for the support of these unusual practices. The unusual practices within some Neo-Pentecostal churches in South Africa are critically unpacked by looking at various churches where the incidents happened. The possible theological, psychological and socio-economic explanations for such practices are outlined in detail. Recommendations are made based on the scientific findings on the unusual practices.

Sign rank versus Vapnik-Chervonenkis dimension

Science.gov (United States)

Alon, N.; Moran, Sh; Yehudayoff, A.

2017-12-01

This work studies the maximum possible sign rank of sign (N × N)-matrices with a given Vapnik-Chervonenkis dimension d. For d=1, this maximum is three. For d=2, this maximum is \\widetilde{\\Theta}(N1/2). For d >2, similar but slightly less accurate statements hold. The lower bounds improve on previous ones by Ben-David et al., and the upper bounds are novel. The lower bounds are obtained by probabilistic constructions, using a theorem of Warren in real algebraic topology. The upper bounds are obtained using a result of Welzl about spanning trees with low stabbing number, and using the moment curve. The upper bound technique is also used to: (i) provide estimates on the number of classes of a given Vapnik-Chervonenkis dimension, and the number of maximum classes of a given Vapnik-Chervonenkis dimension--answering a question of Frankl from 1989, and (ii) design an efficient algorithm that provides an O(N/log(N)) multiplicative approximation for the sign rank. We also observe a general connection between sign rank and spectral gaps which is based on Forster's argument. Consider the adjacency (N × N)-matrix of a Δ-regular graph with a second eigenvalue of absolute value λ and Δ ≤ N/2. We show that the sign rank of the signed version of this matrix is at least Δ/λ. We use this connection to prove the existence of a maximum class C\\subseteq\\{+/- 1\\}^N with Vapnik-Chervonenkis dimension 2 and sign rank \\widetilde{\\Theta}(N1/2). This answers a question of Ben-David et al. regarding the sign rank of large Vapnik-Chervonenkis classes. We also describe limitations of this approach, in the spirit of the Alon-Boppana theorem. We further describe connections to communication complexity, geometry, learning theory, and combinatorics. Bibliography: 69 titles.

Acta Medica Indonesiana - The Indonesian Journal of Internal Medicine 333 Supraclavicular Lymphnodes: Unusual Manifestation of Metastase Adenocarcinoma Colon

Directory of Open Access Journals (Sweden)

Harijono Achmad

2015-12-01

Full Text Available We report a patient with supraclavicular lymph node metastasis from an undetectable adenocarcinoma of the transverse colon, who presented with cough and was diagnosed with typhoid fever, bronchitis as well as liver metastasis. There were an abdominal fullness, weight loss, constipation, pencil-like stool with mucous and blood, low-grade fever, bone ache, and tea-color urine. The first colonoscopy revealed lymphocytic ileitis and microscopic findings also showed lymphocytic ileitis. Abdominal USG and CT revealed liver metastasis of unknown origin. Based on the clinical sign and symptoms, we suspected that colorectal carcinoma was the primary site. Then, the second colonoscopy was performed and it revealed a small polyp, which was followed with a biopsy and the result supported a well-differentiated colon adenocarcinoma. Similar result was also revealed by the histopathological evaluation. This is an unusual case of liver and supraclavicular lymph node metastasis arising from a small polyp adenocacinoma of the transverse colon. Key words: liver metastase, colorectal carcinoma, lymph node.

Definitions for warning signs and signs of severe dengue according to the WHO 2009 classification: Systematic review of literature.

Science.gov (United States)

Morra, Mostafa Ebraheem; Altibi, Ahmed M A; Iqtadar, Somia; Minh, Le Huu Nhat; Elawady, Sameh Samir; Hallab, Asma; Elshafay, Abdelrahman; Omer, Omer Abedlbagi; Iraqi, Ahmed; Adhikari, Purushottam; Labib, Jonair Hussein; Elhusseiny, Khaled Mosaad; Elgebaly, Ahmed; Yacoub, Sophie; Huong, Le Thi Minh; Hirayama, Kenji; Huy, Nguyen Tien

2018-04-24

Since warning signs and signs of severe dengue are defined differently between studies, we conducted a systematic review on how researchers defined these signs. We conducted an electronic search in Scopus to identify relevant articles, using key words including dengue, "warning signs," "severe dengue," and "classification." A total of 491 articles were identified through this search strategy and were subsequently screened by 2 independent reviewers for definitions of any of the warning or severe signs in the 2009 WHO dengue classification. We included all original articles published in English after 2009, classifying dengue by the 2009 WHO classification or providing the additional definition or criterion of warning signs and severity (besides the information of 2009 WHO). Analysis of the extracted data from 44 articles showed wide variations among definitions and cutoff values used by physicians to classify patients diagnosed with dengue infection. The establishment of clear definitions for warning signs and severity is essential to prevent unnecessary hospitalization and harmonizing the interpretation and comparability of epidemiological studies dedicated to dengue infection. Copyright © 2018 John Wiley & Sons, Ltd.

Giant seborrheic keratosis of the face – an unusual presentation

Directory of Open Access Journals (Sweden)

Koh Khai Luen

2016-04-01

Full Text Available Seborrheic keratosis is the most common benign epidermal lesion in the world, especially among the elderly. Its inherent benign nature has precluded the need to remove it for medical reasons. Most of the concerns presented to dermatologists or plastic surgeons are of cosmetic reasons, besides some unusual appearances that necessitate cutaneous malignancy evaluation. Unusually large sizes of seborrheic keratosis are rarely reported, and its clinical significance is largely unknown. It has been proven by recent molecular studies that seborrheic keratosis is true neoplasia rather than a mere epidermal hyperplasia, and various authors have reported several cases of concomitant malignancy arising from seborrheic keratosis. Plastic surgeon expertise is often required when faced with an extensive lesion, requiring reconstructive procedures to preserve good aesthetic and functional outcomes. The purpose of this review is to report a case of an unusually large seborrheic keratosis on the face, highlighting its clinical relevance and surgical management.

Rigor mortis in an unusual position: Forensic considerations.

Science.gov (United States)

D'Souza, Deepak H; Harish, S; Rajesh, M; Kiran, J

2011-07-01

We report a case in which the dead body was found with rigor mortis in an unusual position. The dead body was lying on its back with limbs raised, defying gravity. Direction of the salivary stains on the face was also defying the gravity. We opined that the scene of occurrence of crime is unlikely to be the final place where the dead body was found. The clues were revealing a homicidal offence and an attempt to destroy the evidence. The forensic use of 'rigor mortis in an unusual position' is in furthering the investigations, and the scientific confirmation of two facts - the scene of death (occurrence) is different from the scene of disposal of dead body, and time gap between the two places.

Signed Young Modules and Simple Specht Modules

OpenAIRE

Danz, Susanne; Lim, Kay Jin

2015-01-01

By a result of Hemmer, every simple Specht module of a finite symmetric group over a field of odd characteristic is a signed Young module. While Specht modules are parametrized by partitions, indecomposable signed Young modules are parametrized by certain pairs of partitions. The main result of this article establishes the signed Young module labels of simple Specht modules. Along the way we prove a number of results concerning indecomposable signed Young modules that are of independent inter...

Irreducible Specht modules are signed Young modules

OpenAIRE

Hemmer, David J.

2005-01-01

Recently Donkin defined signed Young modules as a simultaneous generalization of Young and twisted Young modules for the symmetric group. We show that in odd characteristic, if a Specht module $S^\\lambda$ is irreducible, then $S^\\lambda$ is a signed Young module. Thus the set of irreducible Specht modules coincides with the set of irreducible signed Young modules. This provides evidence for our conjecture that the signed Young modules are precisely the class of indecomposable self-dual module...

History of metaphoric signs in radiology

Energy Technology Data Exchange (ETDEWEB)

Baker, Stephen R., E-mail: bakersr@umdnj.edu; Noorelahi, Yasser M., E-mail: dr.ynoorelahi@gmail.com; Ghosh, Shanchita, E-mail: Ghoshs1@umdnj.edu; Yang, Lily C., E-mail: yangclily@gmail.com; Kasper, David J., E-mail: dkasp86@gmail.com

2013-09-15

Purpose: To survey the nearly 100 year history of metaphoric sign naming in radiology describing the pace of their overall accumulation in the radiology canon, their specific rates of growth by modality and subspecialty and the characteristics of the referents to which the signs are attached. Materials and methods: A comprehensive list of metaphoric signs was compiled from a search of articles in several major English language radiology journals, from a roster compiled in a monograph on the subject published in 1984 and from a search of several databases to find signs published in the first half of the 20th century. Results: The growth of radiological metaphorical signs naming was slow for several decades after the first one was published in 1918. It then increased rapidly until the 1980s encompassing all modalities and subspecialties. Recently the practice has shown a marked and steady decline. Conclusion: Metaphoric sign naming was a frequently reported contribution to the radiological literature in the second half of the 20th century corresponding with Radiology's growth as a descriptive discipline. Its decline since then may be a consequence of Radiology's evolution into a more analytic, data-driven field of inquiry.

History of metaphoric signs in radiology

International Nuclear Information System (INIS)

Baker, Stephen R.; Noorelahi, Yasser M.; Ghosh, Shanchita; Yang, Lily C.; Kasper, David J.

2013-01-01

Purpose: To survey the nearly 100 year history of metaphoric sign naming in radiology describing the pace of their overall accumulation in the radiology canon, their specific rates of growth by modality and subspecialty and the characteristics of the referents to which the signs are attached. Materials and methods: A comprehensive list of metaphoric signs was compiled from a search of articles in several major English language radiology journals, from a roster compiled in a monograph on the subject published in 1984 and from a search of several databases to find signs published in the first half of the 20th century. Results: The growth of radiological metaphorical signs naming was slow for several decades after the first one was published in 1918. It then increased rapidly until the 1980s encompassing all modalities and subspecialties. Recently the practice has shown a marked and steady decline. Conclusion: Metaphoric sign naming was a frequently reported contribution to the radiological literature in the second half of the 20th century corresponding with Radiology's growth as a descriptive discipline. Its decline since then may be a consequence of Radiology's evolution into a more analytic, data-driven field of inquiry

Pediatric sciatic neuropathies due to unusual vascular causes

NARCIS (Netherlands)

Srinivasan, Jayashri; Escolar, Diane; Ryan, Monique; Darras, Basil; Jones, H. Royden

Four cases of pediatric sciatic neuropathies due to unusual vascular mechanisms are reported. Pediatric sciatic neuropathies were seen after umbilical artery catheterization, embolization of arteriovenous malformation, meningococcemia, and hypereosinophilic vasculitis. Electrophysiologic studies

Transition from Sign-Reversed to Sign-Preserved Cooper-Pairing Symmetry in Sulfur-Doped Iron Selenide Superconductors.

Science.gov (United States)

Wang, Qisi; Park, J T; Feng, Yu; Shen, Yao; Hao, Yiqing; Pan, Bingying; Lynn, J W; Ivanov, A; Chi, Songxue; Matsuda, M; Cao, Huibo; Birgeneau, R J; Efremov, D V; Zhao, Jun

2016-05-13

An essential step toward elucidating the mechanism of superconductivity is to determine the sign or phase of the superconducting order parameter, as it is closely related to the pairing interaction. In conventional superconductors, the electron-phonon interaction induces attraction between electrons near the Fermi energy and results in a sign-preserved s-wave pairing. For high-temperature superconductors, including cuprates and iron-based superconductors, prevalent weak coupling theories suggest that the electron pairing is mediated by spin fluctuations which lead to repulsive interactions, and therefore that a sign-reversed pairing with an s_{±} or d-wave symmetry is favored. Here, by using magnetic neutron scattering, a phase sensitive probe of the superconducting gap, we report the observation of a transition from the sign-reversed to sign-preserved Cooper-pairing symmetry with insignificant changes in T_{c} in the S-doped iron selenide superconductors K_{x}Fe_{2-y}(Se_{1-z}S_{z})_{2}. We show that a rather sharp magnetic resonant mode well below the superconducting gap (2Δ) in the undoped sample (z=0) is replaced by a broad hump structure above 2Δ under 50% S doping. These results cannot be readily explained by simple spin fluctuation-exchange pairing theories and, therefore, multiple pairing channels are required to describe superconductivity in this system. Our findings may also yield a simple explanation for the sometimes contradictory data on the sign of the superconducting order parameter in iron-based materials.

Tritium in Exit Signs | RadTown USA | US EPA

Science.gov (United States)

2017-08-07

Many exit signs contain tritium to light the sign without batteries or electricity. Using tritium in exit signs allows the sign to remain lit if the power goes out. Tritium is most dangerous when it is inhaled or swallowed. Never tamper with a tritium exit sign. If a tritium exit sign is broken, leave the area immediately and notify the building maintenance staff.

Fast Drawing of Traffic Sign Using Mobile Mapping System

Science.gov (United States)

Yao, Q.; Tan, B.; Huang, Y.

2016-06-01

Traffic sign provides road users with the specified instruction and information to enhance traffic safety. Automatic detection of traffic sign is important for navigation, autonomous driving, transportation asset management, etc. With the advance of laser and imaging sensors, Mobile Mapping System (MMS) becomes widely used in transportation agencies to map the transportation infrastructure. Although many algorithms of traffic sign detection are developed in the literature, they are still a tradeoff between the detection speed and accuracy, especially for the large-scale mobile mapping of both the rural and urban roads. This paper is motivated to efficiently survey traffic signs while mapping the road network and the roadside landscape. Inspired by the manual delineation of traffic sign, a drawing strategy is proposed to quickly approximate the boundary of traffic sign. Both the shape and color prior of the traffic sign are simultaneously involved during the drawing process. The most common speed-limit sign circle and the statistic color model of traffic sign are studied in this paper. Anchor points of traffic sign edge are located with the local maxima of color and gradient difference. Starting with the anchor points, contour of traffic sign is drawn smartly along the most significant direction of color and intensity consistency. The drawing process is also constrained by the curvature feature of the traffic sign circle. The drawing of linear growth is discarded immediately if it fails to form an arc over some steps. The Kalman filter principle is adopted to predict the temporal context of traffic sign. Based on the estimated point,we can predict and double check the traffic sign in consecutive frames.The event probability of having a traffic sign over the consecutive observations is compared with the null hypothesis of no perceptible traffic sign. The temporally salient traffic sign is then detected statistically and automatically as the rare event of having a

The Relationship between Clinical Presentation and Unusual Sensory Interests in Autism Spectrum Disorders: A Preliminary Investigation

Science.gov (United States)

Zachor, Ditza A.; Ben-Itzchak, Esther

2014-01-01

Unusual responses to sensory stimuli have been described in autism spectrum disorder (ASD).The study examined the frequencies of "unusual sensory interests" and "negative sensory responses" and their relation to functioning in a large ASD population (n = 679). Having "unusual sensory interests" was reported in 70.4%…

Unusual presentation of cutaneous leiomyoma

Directory of Open Access Journals (Sweden)

Sapnashree Bhaskar

2014-01-01

Full Text Available Herein, we report a case of leiomyoma cutis because of its rarity and unusual presentation. The case presented with a solitary leiomyoma lesion which was painless. However, the adjacent normal appearing area was tender. A biopsy of the lesion as well as of a portion of the adjacent normal appearing area was taken, which confirmed the diagnosis of cutaneous leiomyoma. This may suggest the dormant nature of the disease which has not yet become apparent.

Unusual skeletal metastases from myxoid liposarcoma only detectable by MR imaging

International Nuclear Information System (INIS)

Ishii, T.; Ueda, T.; Myoui, A.; Tamai, N.; Hosono, N.; Yoshikawa, H.

2003-01-01

We present two cases of skeletal metastases from myxoid liposarcoma, occurring several years after treatment of the primary tumors in the lower limb. The present two case reports have unusual radiological features only detectable by MR imaging and not by plain radiographs or bone scans. From the present two cases, we found that a negative plain radiograph of the spine or a negative bone scan could not exclude skeletal metastases from myxoid liposarcoma, and MRI was a more sensitive screening procedure for their detection, especially in T1-weighted images. Unusual radiological features of skeletal metastases from myxoid liposarcoma are not well documented and only a few cases have been previously reported. Our aim is to document two more patients exhibiting the unusual radiological features of skeletal metastases from myxoid liposarcoma to improve their early detection and management. (orig.)

Adult Sail Sign: Radiographic and Computed Tomographic Features

Energy Technology Data Exchange (ETDEWEB)

Lee, Yu-Jin; Han, Daehee; Koh, Young Hwan; Zo, Joo Hee; Kim, Sang-Hyun; Kim, Deog Kyeom; Lee, Jeong Sang; Moon, Hyeon Jong; Kim, Jong Seung; Chun, Eun Ju; Youn, Byung Jae; Lee, Chang Hyun; Kim, Sam Soo (Dept. of Radiology, Cheil General Hospital, Kwandong Univ. College of Medicine, Seoul (KR))

2008-02-15

Background: The sail sign is a well-known radiographic feature of the pediatric chest. This sign can be observed in an adult population as well, but for a different reason. Purpose: To investigate the sail sign appearing in adult chest radiography. Material and Methods: Based on two anecdotal adult cases in which frontal chest radiographs showed the sail sign, we prospectively screened radiographs of 10,238 patients to determine the incidence of the sail sign found in adults in their 40s or older. The cause of the sail sign was assessed using computed tomography (CT). Results: The sail sign was revealed in 10 (seven males, three females; median age 60.6 years) of 10,238 patients. Of these 10 patients with a sail sign on frontal radiographs, eight underwent CT. The frontal radiographs of these 10 patients showed a concave superior margin toward the lung in nine patients, a concave inferior margin in five, and a double-lined inferior margin in three. Lateral radiographs disclosed a focal opacity over the minor fissure in five of six patients, which was either fuzzy (n = 4) or sharp (n = 1) in its upper margin, and was sometimes double lined in the inferior margin (n = 3). CT revealed the anterior mediastinal fat to be the cause of the radiographic sail sign, which stretched laterally from the mediastinum to insinuate into the minor fissure. Conclusion: The incidence of sail sign on adult chest radiographs is about 0.1%. The sign is specific enough to eliminate the need for more sophisticated imaging

Adult Sail Sign: Radiographic and Computed Tomographic Features

International Nuclear Information System (INIS)

Lee, Yu-Jin; Han, Daehee; Koh, Young Hwan; Zo, Joo Hee; Kim, Sang-Hyun; Kim, Deog Kyeom; Lee, Jeong Sang; Moon, Hyeon Jong; Kim, Jong Seung; Chun, Eun Ju; Y oun, Byung Jae; Lee, Chang Hyun; Kim, Sam Soo

2008-01-01

Background: The sail sign is a well-known radiographic feature of the pediatric chest. This sign can be observed in an adult population as well, but for a different reason. Purpose: To investigate the sail sign appearing in adult chest radiography. Material and Methods: Based on two anecdotal adult cases in which frontal chest radiographs showed the sail sign, we prospectively screened radiographs of 10,238 patients to determine the incidence of the sail sign found in adults in their 40s or older. The cause of the sail sign was assessed using computed tomography (CT). Results: The sail sign was revealed in 10 (seven males, three females; median age 60.6 years) of 10,238 patients. Of these 10 patients with a sail sign on frontal radiographs, eight underwent CT. The frontal radiographs of these 10 patients showed a concave superior margin toward the lung in nine patients, a concave inferior margin in five, and a double-lined inferior margin in three. Lateral radiographs disclosed a focal opacity over the minor fissure in five of six patients, which was either fuzzy (n = 4) or sharp (n = 1) in its upper margin, and was sometimes double lined in the inferior margin (n = 3). CT revealed the anterior mediastinal fat to be the cause of the radiographic sail sign, which stretched laterally from the mediastinum to insinuate into the minor fissure. Conclusion: The incidence of sail sign on adult chest radiographs is about 0.1%. The sign is specific enough to eliminate the need for more sophisticated imaging

Adult sail sign: radiographic and computed tomographic features.

Science.gov (United States)

Lee, Yu-Jin; Han, Daehee; Koh, Young Hwan; Zo, Joo Hee; Kim, Sang-Hyun; Kim, Deog Kyeom; Lee, Jeong Sang; Moon, Hyeon Jong; Kim, Jong Seung; Chun, Eun Ju; Youn, Byung Jae; Lee, Chang Hyun; Kim, Sam Soo

2008-02-01

The sail sign is a well-known radiographic feature of the pediatric chest. This sign can be observed in an adult population as well, but for a different reason. To investigate the sail sign appearing in adult chest radiography. Based on two anecdotal adult cases in which frontal chest radiographs showed the sail sign, we prospectively screened radiographs of 10,238 patients to determine the incidence of the sail sign found in adults in their 40s or older. The cause of the sail sign was assessed using computed tomography (CT). The sail sign was revealed in 10 (seven males, three females; median age 60.6 years) of 10,238 patients. Of these 10 patients with a sail sign on frontal radiographs, eight underwent CT. The frontal radiographs of these 10 patients showed a concave superior margin toward the lung in nine patients, a concave inferior margin in five, and a double-lined inferior margin in three. Lateral radiographs disclosed a focal opacity over the minor fissure in five of six patients, which was either fuzzy (n = 4) or sharp (n = 1) in its upper margin, and was sometimes double lined in the inferior margin (n = 3). CT revealed the anterior mediastinal fat to be the cause of the radiographic sail sign, which stretched laterally from the mediastinum to insinuate into the minor fissure. The incidence of sail sign on adult chest radiographs is about 0.1%. The sign is specific enough to eliminate the need for more sophisticated imaging.

Several unusual cases of child abuse.

Science.gov (United States)

Palmer, H; Weston, J T

1976-10-01

All childhood deaths which occurred in New Mexico during 1974 and 1975 were reviewed. Nine fatal instances of abuse were identified representing the entire spectrum of physical abuse: neglect, abuse in a single episode of injury, repetitive abuse, or sexual abuse. Several cases are summarized. These are unusual either in the distribution of pathologic findings or in the problems encountered in court presentation.

Unusual signal intensity of congenital pulmonary airway malformation on fetal magnetic resonance imaging

Energy Technology Data Exchange (ETDEWEB)

Owada, Keiho; Miyazaki, Osamu; Nosaka, Shunsuke [National Center for Child Health and Development, Department of Radiology, Tokyo (Japan); Matsuoka, Kentaro [National Center for Child Health and Development, Department of Pathology, Tokyo (Japan); Sago, Haruhiko [National Center for Child Health and Development, Department of Perinatal Medicine and Maternal Care, Tokyo (Japan)

2015-05-01

Congenital pulmonary airway malformation (CPAM) is classified into pathologically different types. These types are sometimes distinguishable by fetal lung MRI and are usually observed as higher-signal lesions on T2-weighted images than normal lung. We describe a case of unusual CPAM resembling neoplasms, with a lower signal than is found in normal lung. Histopathology showed a large number of mucogenic cells but found no evidence that could explain this feature on fetal MRI. An unusual low-signal mass associated with a pulmonary cyst in fetal lung on MRI may suggest an unusual type 1 CPAM. (orig.)

Unusual signal intensity of congenital pulmonary airway malformation on fetal magnetic resonance imaging

International Nuclear Information System (INIS)

Owada, Keiho; Miyazaki, Osamu; Nosaka, Shunsuke; Matsuoka, Kentaro; Sago, Haruhiko

2015-01-01

Congenital pulmonary airway malformation (CPAM) is classified into pathologically different types. These types are sometimes distinguishable by fetal lung MRI and are usually observed as higher-signal lesions on T2-weighted images than normal lung. We describe a case of unusual CPAM resembling neoplasms, with a lower signal than is found in normal lung. Histopathology showed a large number of mucogenic cells but found no evidence that could explain this feature on fetal MRI. An unusual low-signal mass associated with a pulmonary cyst in fetal lung on MRI may suggest an unusual type 1 CPAM. (orig.)

Time integrated ratio of wrong-sign to right-sign $D^0 \\rightarrow K\\pi$ decays in 2010 data at LHCb

CERN Document Server

The LHCb Collaboration

2011-01-01

First results of the measurement on wrong-sign $D^0 \\rightarrow K^{+} \\pi^{-}$ decays based on the 2010 dataset taken with the LHCb detector are presented. The ratio of wrong-sign to right-sign ($D^0 \\rightarrow K^{-} \\pi^{+}$) $D^0$ decays corrected for the decay time acceptance is determined to be $R_{{\\rm corr}}=(0.409 \\pm 0.031 ({\\rm stat.}) \\pm 0.039 ({\\rm sys.})) \\% $. This analysis is the first step towards a measurement of the time-dependent wrong-sign to right-sign ratio from which the $D^0$ mixing parameters can be extracted.

Impalement of an unusual foreign body on the temporomandibular joint causing severe trismus.

Science.gov (United States)

Ito, Ryohei; Kubota, Kosei; Furudate, Ken; Nakagawa, Hiroshi; Kon, Takao; Tamura, Yoshihiro; Kobayashi, Wataru

2016-12-01

A penetrating injury by a foreign body is comparatively common in the oral and maxillofacial region. On the other hand, injury to the temporomandibular joint (TMJ) by a foreign object is very rare. The TMJ is an anatomically narrow space surrounded by hard bony processes. An unusual case of trauma with severe trismus caused by a foreign body that impaled the TMJ is reported. A 55-year-old man presented with a 5 × 1-cm laceration to the right cheek caused by a flying object propelled during the use of a lawn mower. The edge of the foreign body had a metallic wire, which became imbedded in the wound. His jaw opening was severely limited. Computed tomography revealed that the foreign body was 3 mm in diameter and was impaled on the articular capsule. The object was successfully removed, and the wound and interior of the TMJ were irrigated. Rehabilitation of mouth opening was started on postoperative day 3. On day 9, mouth opening had improved to 35 mm, and he was discharged. After 1 year, mouth opening was 45 mm with no sign of any TMJ disorders. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Peroneal Arteriovenous Fistula and Pseudoaneurysm: An Unusual Presentation

Directory of Open Access Journals (Sweden)

Kevin C. Ching

2014-01-01

Full Text Available Peroneal artery arteriovenous fistulas and pseudoaneurysms are extremely rare with the majority of reported cases due to penetrating, orthopedic, or iatrogenic trauma. Failure to diagnose this unusual vascular pathology may lead to massive hemorrhage or limb threatening ischemia. We report an interesting case of a 14-year-old male who presented with acute musculoskeletal pain of his lower extremity. Initial radiographs were negative. Further imaging workup revealed a peroneal arteriovenous fistula with a large pseudoaneurysm. After initial endovascular intervention was unsuccessful, the vessels were surgically ligated in the operating room. Pathology revealed papillary endothelial hyperplasia consistent with an aneurysm and later genetic testing was consistent with Ehlers-Danlos syndrome Type IV. This case illustrates an unusual cause of acute atraumatic musculoskeletal pain and uncommon presentation of Ehlers-Danlos syndrome.

An unusual case of calcineurine inhibitor pain syndrome.

Science.gov (United States)

Nickavar, Azar; Mehrazma, Mitra; Hallaji, Farideh

2014-09-01

Cyclosporine induced pain syndrome (CIPS) is a newly diagnosed complication of calcineurine inhibitors, mainly observed in solid organ and hematopoetic transplantations. The present case is a male child with steroid resistant nephrotic syndrome on low therapeutic level cyclosporine treatment. He presented with intractable and debilitating leg pain, with no reported history of previous injury or trauma. The pain was reluctant to antimicrobial and sedative treatment. MRI revealed bone marrow and soft tissue edema in the mid shaft of patient's right leg. Inspite of unusual manifestations, CIPS was suggested and cyclosporine discontinued. However, the pain did not improve and was resistant to calcium blocker. Subsequently, core decompression was performed as an unusual treatment of CIPS, revealing normal bone morphology. The pain improved rapidly and the patient was discharged a few days later.

Enhancing the Hydrophilicity and Cell Attachment of 3D Printed PCL/Graphene Scaffolds for Bone Tissue Engineering

Directory of Open Access Journals (Sweden)

Weiguang Wang

2016-12-01

Full Text Available Scaffolds are physical substrates for cell attachment, proliferation, and differentiation, ultimately leading to the regeneration of tissues. They must be designed according to specific biomechanical requirements, i.e., certain standards in terms of mechanical properties, surface characteristics, porosity, degradability, and biocompatibility. The optimal design of a scaffold for a specific tissue strongly depends on both materials and manufacturing processes, as well as surface treatment. Polymeric scaffolds reinforced with electro-active particles could play a key role in tissue engineering by modulating cell proliferation and differentiation. This paper investigates the use of an extrusion-based additive manufacturing system to produce poly(ε-caprolactone (PCL/pristine graphene scaffolds for bone tissue applications and the influence of chemical surface modification on their biological behaviour. Scaffolds with the same architecture but different concentrations of pristine graphene were evaluated from surface property and biological points of view. Results show that the addition of pristine graphene had a positive impact on cell viability and proliferation, and that surface modification leads to improved cell response.

Enhancing the Hydrophilicity and Cell Attachment of 3D Printed PCL/Graphene Scaffolds for Bone Tissue Engineering

Science.gov (United States)

Wang, Weiguang; Caetano, Guilherme; Ambler, William Stephen; Blaker, Jonny James; Frade, Marco Andrey; Mandal, Parthasarathi; Diver, Carl; Bártolo, Paulo

2016-01-01

Scaffolds are physical substrates for cell attachment, proliferation, and differentiation, ultimately leading to the regeneration of tissues. They must be designed according to specific biomechanical requirements, i.e., certain standards in terms of mechanical properties, surface characteristics, porosity, degradability, and biocompatibility. The optimal design of a scaffold for a specific tissue strongly depends on both materials and manufacturing processes, as well as surface treatment. Polymeric scaffolds reinforced with electro-active particles could play a key role in tissue engineering by modulating cell proliferation and differentiation. This paper investigates the use of an extrusion-based additive manufacturing system to produce poly(ε-caprolactone) (PCL)/pristine graphene scaffolds for bone tissue applications and the influence of chemical surface modification on their biological behaviour. Scaffolds with the same architecture but different concentrations of pristine graphene were evaluated from surface property and biological points of view. Results show that the addition of pristine graphene had a positive impact on cell viability and proliferation, and that surface modification leads to improved cell response. PMID:28774112

Worldwide Environmental Compliance Assessment System (ECAS)

Science.gov (United States)

1993-03-01

may greater, it was flushed prior to disposal with a solvent containing less be disposed of as munici- than 50 ppm PCB. ( 1X2X3 ) pal solid waste if...material or proper warning signs and fences are installed and maintained as follows: ( 1X2X3 ) - warning signs are displayed at all entrances at intervals...greater than ,4 pC/L. ( 1X2X3 ) and 3 structures if the ini- tial phase measurement of Priority 1 structures indi- cated radon concentra- tions greater

Cutaneous sporotrichosis: Unusual clinical presentations

Directory of Open Access Journals (Sweden)

Mahajan Vikram

2010-01-01

Full Text Available Three unusual clinical forms of sporotrichosis described in this paper will be a primer for the clinicians for an early diagnosis and treatment, especially in its unusual presentations. Case 1, a 52-year-old man, developed sporotrichosis over pre-existing facial nodulo-ulcerative basal cell carcinoma of seven-year duration, due to its contamination perhaps from topical herbal pastes and lymphocutaneous sporotrichosis over right hand/forearm from facial lesion/herbal paste. Case 2, a 25-year-old woman, presented with disseminated systemic-cutaneous, osteoarticular and possibly pleural (effusion sporotrichosis. There was no laboratory evidence of tuberculosis and treatment with anti-tuberculosis drugs (ATT did not benefit. Both these cases were diagnosed by histopathology/culture of S. schenckii from tissue specimens. Case 3, a 20-year-old girl, had multiple intensely pruritic, nodular lesions over/around left knee of two-year duration. She was diagnosed clinically as a case of prurigo nodularis and histologically as cutaneous tuberculosis, albeit, other laboratory investigations and treatment with ATT did not support the diagnosis. All the three patients responded well to saturated solution of potassium iodide (SSKI therapy. A high clinical suspicion is important in early diagnosis and treatment to prevent chronicity and morbidity in these patients. SSKI is fairly safe and effective when itraconazole is not affordable/ available.

50 CFR 85.43 - Signs and symbols.

Science.gov (United States)

2010-10-01

... sign. (i) You may place the message “P PUMP OUT”, “P PUMPOUT STATION”, “P PORTABLE TOILET DUMP STATION... information signs at pumpout and portable toilet dump stations. Such information should indicate fees... sign at the entrance to a marina advertising the presence of a pumpout and/or portable toilet dump...