WorldWideScience

Sample records for pattern high quality

  1. New process for high optical quality InAs quantum dots grown on patterned GaAs(001) substrates

    International Nuclear Information System (INIS)

    Alonso-Gonzalez, Pablo; Gonzalez, Luisa; Gonzalez, Yolanda; Fuster, David; Fernandez-Martinez, Ivan; Martin-Sanchez, Javier; Abelmann, Leon

    2007-01-01

    This work presents a selective ultraviolet (UV)-ozone oxidation-chemical etching process that has been used, in combination with laser interference lithography (LIL), for the preparation of GaAs patterned substrates. Further molecular beam epitaxy (MBE) growth of InAs results in ordered InAs/GaAs quantum dot (QD) arrays with high optical quality from the first layer of QDs formed on the patterned substrate. The main result is the development of a patterning technology that allows the engineering of customized geometrical displays of QDs with the same optical quality as those formed spontaneously on flat non-patterned substrates

  2. High quality single shot diffraction patterns using ultrashort megaelectron volt electron beams from a radio frequency photoinjector

    Energy Technology Data Exchange (ETDEWEB)

    Musumeci, P.; Moody, J. T.; Scoby, C. M.; Gutierrez, M. S. [Department of Physics and Astronomy, UCLA, Los Angeles, California 90095 (United States); Bender, H. A.; Wilcox, N. S. [National Security Technologies, LLC, Los Alamos Operations, Los Alamos, New Mexico 87544 (United States)

    2010-01-15

    Single shot diffraction patterns using a 250-fs-long electron beam have been obtained at the UCLA Pegasus laboratory. High quality images with spatial resolution sufficient to distinguish closely spaced peaks in the Debye-Scherrer ring pattern have been recorded by scattering the 1.6 pC 3.5 MeV electron beam generated in the rf photoinjector off a 100-nm-thick Au foil. Dark current and high emittance particles are removed from the beam before sending it onto the diffraction target using a 1 mm diameter collimating hole. These results open the door to the study of irreversible phase transformations by single shot MeV electron diffraction.

  3. High quality single shot diffraction patterns using ultrashort megaelectron volt electron beams from a radio frequency photoinjector.

    Science.gov (United States)

    Musumeci, P; Moody, J T; Scoby, C M; Gutierrez, M S; Bender, H A; Wilcox, N S

    2010-01-01

    Single shot diffraction patterns using a 250-fs-long electron beam have been obtained at the UCLA Pegasus laboratory. High quality images with spatial resolution sufficient to distinguish closely spaced peaks in the Debye-Scherrer ring pattern have been recorded by scattering the 1.6 pC 3.5 MeV electron beam generated in the rf photoinjector off a 100-nm-thick Au foil. Dark current and high emittance particles are removed from the beam before sending it onto the diffraction target using a 1 mm diameter collimating hole. These results open the door to the study of irreversible phase transformations by single shot MeV electron diffraction.

  4. High quality single shot diffraction patterns using ultrashort megaelectron volt electron beams from a radio frequency photoinjector

    International Nuclear Information System (INIS)

    Musumeci, P.; Moody, J. T.; Scoby, C. M.; Gutierrez, M. S.; Bender, H. A.; Wilcox, N. S.

    2010-01-01

    Single shot diffraction patterns using a 250-fs-long electron beam have been obtained at the UCLA Pegasus laboratory. High quality images with spatial resolution sufficient to distinguish closely spaced peaks in the Debye-Scherrer ring pattern have been recorded by scattering the 1.6 pC 3.5 MeV electron beam generated in the rf photoinjector off a 100-nm-thick Au foil. Dark current and high emittance particles are removed from the beam before sending it onto the diffraction target using a 1 mm diameter collimating hole. These results open the door to the study of irreversible phase transformations by single shot MeV electron diffraction.

  5. Architectural patterns and quality attributes interaction

    NARCIS (Netherlands)

    Me, G.; Calero Munoz, C.; Lago, P.; Muccini, H.

    2016-01-01

    Architectural patterns and styles represent common solutions to recurrent problems. They encompass architectural knowledge about how to achieve holistic system quality. The relation between patterns (or styles) and quality attributes has been regularly addressed in the literature. However, there is

  6. Quality-Attribute-Based Economic Valuation of Architectural Patterns

    National Research Council Canada - National Science Library

    Ozkaya, Ipek; Kazman, Rick; Klein, Mark

    2007-01-01

    .... Architectural patterns can be used to achieve quality attribute requirements. Consequently, architectural patterns generate value based on the present and future utility of the quality attributes they achieve...

  7. International Business Research: Coauthorship Patterns and Quality

    Science.gov (United States)

    Chan, Kam C; Fung, Hung-Gay; Leung, Wai K.

    2008-01-01

    The authors investigate published international business research in four international business journals over a 10-year period, 1995-2004: (a) patterns of coauthorship across regions, and (b) the relation between coauthorship patterns and the quality of international business (IB) articles. A cross-region coauthorship enhances the quality of an…

  8. Dietary patterns and quality in West-African immigrants in Madrid

    Directory of Open Access Journals (Sweden)

    Vioque Jesús

    2009-01-01

    Full Text Available Abstract Background Eating patterns of immigrants deserve to be better documented because they may reflect the extent of acculturation and associated health risks. The study assessed dietary patterns and quality in Bubi immigrants (from Equatorial Guinea using cluster analysis and comparing different diet quality indexes. Methods A random sample of 83 Bubi men and 130 women living in Madrid were studied. A 99-item food frequency questionnaire was administered, body weights and heights were self-reported and socio-demographic and health information was collected during interviews. Usual intakes were collapsed into 19 food groups. Cluster analysis of standardized food intakes per 1000 kcalories was performed. Dietary quality was appraised using the Alternative Mediterranean Diet Score, the Alternative Healthy Eating Index and scores of micronutrient adequacy and prevention based on WHO/FAO recommendations. Results Two dietary patterns were identified. The 'Healthier' pattern, so confirmed by two dietary quality indexes, featured a higher consumption of fish, fruits, vegetables, legumes, dairy products and bread while the 'Western' pattern included more processed meat, animal fat, and sweetened foods and drinks. One third of the subjects were in the 'Healthier' food cluster, with the same proportion of men and women. Age ≥ 30 and residence in Madrid ≥ 11 years were independently associated with the healthier diet. Consumption of traditional foods was unrelated to dietary pattern, however. Overall, Bubi diets were somewhat protective because of high intakes of fruits and vegetables and monounsaturated fat (olive oil, but not with respect to sugar, cholesterol, omega-3 fatty acids and fibre. Less than two thirds of subjects had adequate intakes of iron, calcium and folate in both dietary phenotypes. Body mass index, physical exercise, and self-reported health and cardiovascular disease condition showed no significant association with the dietary

  9. Nutritional quality of dietary patterns of children: are there differences inside and outside school?

    Directory of Open Access Journals (Sweden)

    Diva Aliete dos Santos Vieira

    Full Text Available Abstract: Objectives: To describe the dietary patterns of children inside and outside school and investigate their associations with sociodemographic factors and nutritional status. Methods: This was a multicenter cross-sectional study in which children of both sexes, aged 1-6 years, attending private and public daycare centers and preschools in Brazil, were evaluated (n = 2979. Demographic, socioeconomic and dietary data (weighed food records and estimated food records were collected. Dietary patterns were derived by factor analysis from 36 food groups. Results: Four dietary patterns were identified inside school, and three outside. Inside school, the "traditional" pattern was associated to low income and presented high nutritional quality. The "dual" pattern was associated with low income and with high intake of added sugar and glycemic load. The "snack" pattern was associated with children enrolled at private schools and with high intake of added sugar and glycemic load. The "bread and butter" pattern was associated with high intake of added sugar and trans fat. Outside school, the "traditional" pattern was associated with high intake of saturated fat, trans fats, sodium, and total fiber. The "bread and butter" pattern was associated with high intake of trans fats and glycemic load, whereas the "snack" pattern was associated with overweight, private schools, high income, and high intake of trans fats, sodium, and total fiber. Conclusion: There are differences in the nutritional quality of dietary patterns inside and outside school, and heterogeneity in adherence to these patterns were observed across regions and socioeconomic classes.

  10. Nutritional quality of dietary patterns of children: are there differences inside and outside school?

    Science.gov (United States)

    Vieira, Diva Aliete Dos Santos; Castro, Michelle Alessandra; Fisberg, Mauro; Fisberg, Regina Mara

    To describe the dietary patterns of children inside and outside school and investigate their associations with sociodemographic factors and nutritional status. This was a multicenter cross-sectional study in which children of both sexes, aged 1-6 years, attending private and public daycare centers and preschools in Brazil, were evaluated (n=2979). Demographic, socioeconomic and dietary data (weighed food records and estimated food records) were collected. Dietary patterns were derived by factor analysis from 36 food groups. Four dietary patterns were identified inside school, and three outside. Inside school, the "traditional" pattern was associated to low income and presented high nutritional quality. The "dual" pattern was associated with low income and with high intake of added sugar and glycemic load. The "snack" pattern was associated with children enrolled at private schools and with high intake of added sugar and glycemic load. The "bread and butter" pattern was associated with high intake of added sugar and trans fat. Outside school, the "traditional" pattern was associated with high intake of saturated fat, trans fats, sodium, and total fiber. The "bread and butter" pattern was associated with high intake of trans fats and glycemic load, whereas the "snack" pattern was associated with overweight, private schools, high income, and high intake of trans fats, sodium, and total fiber. There are differences in the nutritional quality of dietary patterns inside and outside school, and heterogeneity in adherence to these patterns were observed across regions and socioeconomic classes. Copyright © 2016 Sociedade Brasileira de Pediatria. Published by Elsevier Editora Ltda. All rights reserved.

  11. Empirically derived dietary patterns and health-related quality of life in the SUN project.

    Science.gov (United States)

    Ruano, Cristina; Henriquez, Patricia; Martínez-González, Miguel Ángel; Bes-Rastrollo, Maira; Ruiz-Canela, Miguel; Sánchez-Villegas, Almudena

    2013-01-01

    The analysis of dietary patterns has become a valuable tool to examine diet-disease relationships but little is known about their effects on quality of life. Our aim was to ascertain the association between major dietary patterns and mental and physical quality of life after 4 years of follow-up. This analysis included 11,128 participants from the "Seguimiento Universidad de Navarra" (SUN) cohort. Dietary habits were assessed using a validated food-frequency questionnaire. Factor analysis was used to derive dietary patterns. Quality of life was measured with the validated Spanish version of the SF-36 Health Survey. Two major dietary patterns were identified, the 'Western' dietary pattern (rich in red meats, processed pastries and fast-food) and the "Mediterranean" dietary pattern (high in fruits, vegetables and olive oil). After controlling for confounders, the Western dietary pattern was associated with quality of life in all domains. The magnitude of these differences between the subjects in the highest (quintile 5) and the lowest quintile of adherence to the Western pattern ranged from -0.8 (for mental health) to -3.5 (for vitality). On the contrary, the Mediterranean dietary pattern was associated with better quality of life domains: differences ranged from +1.3 (for physical functioning) to +3.4 (for vitality) when comparing extreme quintiles of adherence. Additional sensitivity analyses did not change the reported differences. Whereas baseline adherence to a Western dietary pattern was inversely associated with self-perceived quality of life after 4 years of follow-up, baseline adherence to a Mediterranean dietary pattern was directly associated with better scores in quality of life four years later in the SUN Project.

  12. Empirically derived dietary patterns and health-related quality of life in the SUN project.

    Directory of Open Access Journals (Sweden)

    Cristina Ruano

    Full Text Available The analysis of dietary patterns has become a valuable tool to examine diet-disease relationships but little is known about their effects on quality of life. Our aim was to ascertain the association between major dietary patterns and mental and physical quality of life after 4 years of follow-up.This analysis included 11,128 participants from the "Seguimiento Universidad de Navarra" (SUN cohort. Dietary habits were assessed using a validated food-frequency questionnaire. Factor analysis was used to derive dietary patterns. Quality of life was measured with the validated Spanish version of the SF-36 Health Survey.Two major dietary patterns were identified, the 'Western' dietary pattern (rich in red meats, processed pastries and fast-food and the "Mediterranean" dietary pattern (high in fruits, vegetables and olive oil. After controlling for confounders, the Western dietary pattern was associated with quality of life in all domains. The magnitude of these differences between the subjects in the highest (quintile 5 and the lowest quintile of adherence to the Western pattern ranged from -0.8 (for mental health to -3.5 (for vitality. On the contrary, the Mediterranean dietary pattern was associated with better quality of life domains: differences ranged from +1.3 (for physical functioning to +3.4 (for vitality when comparing extreme quintiles of adherence. Additional sensitivity analyses did not change the reported differences.Whereas baseline adherence to a Western dietary pattern was inversely associated with self-perceived quality of life after 4 years of follow-up, baseline adherence to a Mediterranean dietary pattern was directly associated with better scores in quality of life four years later in the SUN Project.

  13. Snacking patterns, diet quality, and cardiovascular risk factors in adults

    Science.gov (United States)

    2014-01-01

    Background The relationship of snacking patterns on nutrient intake and cardiovascular risk factors (CVRF) in adults is unknown. The aim of this study was to examine the associations of snacking patterns with nutrient intake, diet quality, and a selection of CVRF in adults participating in the 2001-2008 National Health and Nutrition Examination Survey. Methods 24-hour dietary recalls were used to determine intake and cluster analysis was used to identify the snacking patterns. Height and weight were obtained and the health indices that were evaluated included diastolic and systolic blood pressure, high density lipoprotein-cholesterol, low density lipoprotein cholesterol, triacylglycerides, blood glucose, and insulin. Results The sample was participants (n = 18,988) 19+ years (50% males; 11% African-Americans; 72% white, 12% Hispanic-Americans, and 5% other). Cluster analyses generated 12 distinct snacking patterns, explaining 61% of the variance in snacking. Comparisons of snacking patterns were made to the no snack pattern. It was found that miscellaneous snacks constituted the most common snacking pattern (17%) followed by cakes/cookies/pastries (12%) and sweets (9%). Most snacking patterns were associated with higher energy intakes. Snacking patterns cakes/cookies/pastries, vegetables/legumes, crackers/salty snacks, other grains and whole fruit were associated with lower intakes of saturated fatty acids. Added sugars intakes were higher in the cakes/cookies/pastries, sweets, milk desserts, and soft drinks patterns. Five snack patterns (cakes/cookies/pastries, sweets, vegetable/legumes, milk desserts, soft drinks) were associated with lower sodium intakes. Several snack patterns were associated with higher intakes of potassium, calcium, fiber, vitamin A, and magnesium. Five snacking patterns (miscellaneous snacks; vegetables/legumes; crackers/salty snacks; other grains; and whole fruit) were associated with better diet quality scores. Alcohol was associated with

  14. Patterns of communication in high-fidelity simulation.

    Science.gov (United States)

    Anderson, Judy K; Nelson, Kimberly

    2015-01-01

    High-fidelity simulation is commonplace in nursing education. However, critical thinking, decision making, and psychomotor skills scenarios are emphasized. Scenarios involving communication occur in interprofessional or intraprofessional settings. The importance of effective nurse-patient communication is reflected in statements from the American Nurses Association and Quality and Safety Education for Nurses, and in the graduate outcomes of most nursing programs. This qualitative study examined the patterns of communication observed in video recordings of a medical-surgical scenario with 71 senior students in a baccalaureate program. Thematic analysis revealed patterns of (a) focusing on tasks, (b) communicating-in-action, and (c) being therapeutic. Additional categories under the patterns included missing opportunities, viewing the "small picture," relying on informing, speaking in "medical tongues," offering choices…okay?, feeling uncomfortable, and using therapeutic techniques. The findings suggest the importance of using high-fidelity simulation to develop expertise in communication. In addition, the findings reinforce the recommendation to prioritize communication aspects of scenarios and debriefing for all simulations. Copyright 2015, SLACK Incorporated.

  15. An improved multi-exposure approach for high quality holographic femtosecond laser patterning

    International Nuclear Information System (INIS)

    Zhang, Chenchu; Hu, Yanlei; Li, Jiawen; Lao, Zhaoxin; Ni, Jincheng; Chu, Jiaru; Huang, Wenhao; Wu, Dong

    2014-01-01

    High efficiency two photon polymerization through single exposure via spatial light modulator (SLM) has been used to decrease the fabrication time and rapidly realize various micro/nanostructures, but the surface quality remains a big problem due to the speckle noise of optical intensity distribution at the defocused plane. Here, a multi-exposure approach which used tens of computer generate holograms successively loaded on SLM is presented to significantly improve the optical uniformity without losing efficiency. By applying multi-exposure, we found that the uniformity at the defocused plane was increased from ∼0.02 to ∼0.6 according to our simulation. The fabricated two series of letters “HELLO” and “USTC” under single-and multi-exposure in our experiment also verified that the surface quality was greatly improved. Moreover, by this method, several kinds of beam splitters with high quality, e.g., 2 × 2, 5 × 5 Daman, and complex nonseperate 5 × 5, gratings were fabricated with both of high quality and short time (<1 min, 95% time-saving). This multi-exposure SLM-two-photon polymerization method showed the promising prospect in rapidly fabricating and integrating various binary optical devices and their systems

  16. An improved multi-exposure approach for high quality holographic femtosecond laser patterning

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Chenchu; Hu, Yanlei, E-mail: huyl@ustc.edu.cn, E-mail: jwl@ustc.edu.cn; Li, Jiawen, E-mail: huyl@ustc.edu.cn, E-mail: jwl@ustc.edu.cn; Lao, Zhaoxin; Ni, Jincheng; Chu, Jiaru; Huang, Wenhao; Wu, Dong [Department of Precision Machinery and Precision Instrumentation, University of Science and Technology of China, Hefei 230026 (China)

    2014-12-01

    High efficiency two photon polymerization through single exposure via spatial light modulator (SLM) has been used to decrease the fabrication time and rapidly realize various micro/nanostructures, but the surface quality remains a big problem due to the speckle noise of optical intensity distribution at the defocused plane. Here, a multi-exposure approach which used tens of computer generate holograms successively loaded on SLM is presented to significantly improve the optical uniformity without losing efficiency. By applying multi-exposure, we found that the uniformity at the defocused plane was increased from ∼0.02 to ∼0.6 according to our simulation. The fabricated two series of letters “HELLO” and “USTC” under single-and multi-exposure in our experiment also verified that the surface quality was greatly improved. Moreover, by this method, several kinds of beam splitters with high quality, e.g., 2 × 2, 5 × 5 Daman, and complex nonseperate 5 × 5, gratings were fabricated with both of high quality and short time (<1 min, 95% time-saving). This multi-exposure SLM-two-photon polymerization method showed the promising prospect in rapidly fabricating and integrating various binary optical devices and their systems.

  17. [Changes of regional environment quality pattern in China since 1986-2008].

    Science.gov (United States)

    Guan, Wei-Hua; Sun, Ming-Kun; Lu, Yu-Qi

    2011-03-01

    For further study of regional differences and the pattern of changes in environmental quality in China since 1986-2008, we perform the principal component analysis, standard deviation, Mann-Kendall and cluster analysis on 18 environmental quality indexes in 28 provinces of China in this paper. Those indexes refer to pollutant emission, pollutants treatment capacities and pollutant emission of per unit land area, etc. The paper indicates that regional environmental quality in China has been increased slightly during this period. It can be divided into four stages: 1986-2000, 2000-2001, 2001-2005 and 2005-2008. The overall patterns of regional environmental quality is the West is higher than the East in general, while the environmental quality of the eastern part have been changed somewhat. For more details, the regional environmental quality in China in 1986 is composed of two parts, the eastern part and the western part, while in 2000 and 2001 the eastern part, the middle part and the western part appears as the overall pattern. For the year of 2005, the regional environmental quality in the western is higher than that of the eastern; meanwhile, the eastern can be divided into the northern part, the middle part and the southern part, and the environmental quality in northern part is better than that of the southern part, southern part is better than that of the middle part. This pattern hardly changed in 2008, except that the area with poor environment quality region had expanded. Pollutant emission of per unit land area played as a main factor; yet both the pollutant emission and the reuse of pollutants impacted the pattern specifically. In addition, the national macro policies, the regional policies, the regional economic and the industrial structure can be primary reason for the change of regional environmental quality pattern in China as well.

  18. A high quality finger vascular pattern dataset collected using a custom designed capturing device

    NARCIS (Netherlands)

    Ton, B.T.; Veldhuis, Raymond N.J.

    2013-01-01

    The number of finger vascular pattern datasets available for the research community is scarce, therefore a new finger vascular pattern dataset containing 1440 images is prsented. This dataset is unique in its kind as the images are of high resolution and have a known pixel density. Furthermore this

  19. High resolution laser patterning of ITO on PET substrate

    Science.gov (United States)

    Zhang, Tao; Liu, Di; Park, Hee K.; Yu, Dong X.; Hwang, David J.

    2013-03-01

    Cost-effective laser patterning of indium tin oxide (ITO) thin film coated on flexible polyethylene terephthalate (PET) film substrate for touch panel was studied. The target scribing width was set to the order of 10 μm in order to examine issues involved with higher feature resolution. Picosecond-pulsed laser and Q-switched nanosecond-pulsed laser at the wavelength of 532nm were applied for the comparison of laser patterning in picosecond and nanosecond regimes. While relatively superior scribing quality was achieved by picosecond laser, 532 nm wavelength showed a limitation due to weaker absorption in ITO film. In order to seek for cost-effective solution for high resolution ITO scribing, nanosecond laser pulses were applied and performance of 532nm and 1064nm wavelengths were compared. 1064nm wavelength shows relatively better scribing quality due to the higher absorption ratio in ITO film, yet at noticeable substrate damage. Through single pulse based scribing experiments, we inspected that reduced pulse overlapping is preferred in order to minimize the substrate damage during line patterning.

  20. A Lebanese dietary pattern promotes better diet quality among older adults: findings from a national cross-sectional study.

    Science.gov (United States)

    Jomaa, Lamis; Hwalla, Nahla; Itani, Leila; Chamieh, Marie Claire; Mehio-Sibai, Abla; Naja, Farah

    2016-04-19

    Proper nutrition is critical for healthy aging and maintaining functional independence. Limited research has been done on the assessment of dietary patterns of older adults and their association with diet quality indices. This study was conducted to identify, characterize, and evaluate the dietary patterns and diet quality of older adults in Lebanon, a middle-income country undergoing nutrition transition. A cross-sectional population-based study was conducted on a nationally representative sample of community-dwelling older adults aged >50 years (n = 525). Socio-demographic, anthropometric, and lifestyle variables were collected through interviews, and dietary intake was assessed using a semi-quantitative food frequency questionnaire (FFQ). Five commonly used diet quality indices (DQIs) were calculated, including the Alternative Healthy Eating Index (AHEI), the alternate Mediterranean diet score (aMed), the Dietary Approach to Stop Hypertension (DASH) style diet score, and the Lebanese Mediterranean Diet index. Dietary patterns (DPs) were derived using exploratory factor analysis. Associations of identified DPs with energy, energy-adjusted nutrients, and DQIs were evaluated by Pearson's correlations. Multiple linear regression analyses were used to examine correlates of DPs. Three DPs were derived: Lebanese, Western, and High Protein/Alcohol patterns. The Lebanese pattern had highest correlations with fiber, folate, vitamin C, and all five DQIs. The Western was positively associated with energy and sodium and was inversely correlated with fiber, most vitamins, and a number of DQIs, namely AHEI, aMED, and DASH-style diet score. Highest correlations with intakes of proteins and fat were observed for the High Protein/Alcohol pattern. The Lebanese pattern was associated with female gender, education, nonsmoking and physical activity, whereas the Western pattern was associated with adverse health behaviors, including smoking, skipping breakfast, and physical inactivity

  1. Spatial Pattern, Transportation and Air Quality Nexus: The Case of Iskandar Malaysia

    Directory of Open Access Journals (Sweden)

    Azalia Mohd Yusop

    2016-09-01

    Full Text Available Spatial pattern, transportation, and air quality are three development entities which significantly affecting one another. This nexus exhibits the urbanization imprint accouter transportation generating air pollution as a reflection of spatial distribution. The integration among them is a vital part of development as it affects the societal living environment. It provides unfavorable air quality and directly cause health problems. The developing region of Iskandar Malaysia exhibits huge spatial distribution transformation accompanied by large percentage of urbanization rate, but seems less integration of land use and transportation planning which causes the exaggeration of air pollution. We carry out the research on the nexus of spatial distribution, transportation and air quality in Iskandar Malaysia by analyzing and evaluating the interconnectivity of these three entities. The spatial analysis and evaluation on the land use development pattern and spatial policy shows that the Iskandar development region are growing in the polycentric manners, where the spatial development policy drives the distributional growth of new sub-centers. We undertook a household-based travel survey that reveals the poly-centricity reflected by the de-concentration of workplaces which shifted from the single point towards multiple centers. On the other hand, this phenomenon has created a distributional traffic pattern amid the high dependency on the private vehicles of the citizens in Iskandar Malaysia. With a predominantly fossil fuel consuming vehicles, this has generated air pollution. Based on the traffic survey and the dependency of the citizens on private cars for their daily mobility, the concentration of air pollution is seemingly at risk. This research reflects that Iskandar Malaysia development region currently undergoes towards polycentric development with some new urban centers. We found that land use and transportation planning policies require serious

  2. Scale effects on spatially varying relationships between urban landscape patterns and water quality.

    Science.gov (United States)

    Sun, Yanwei; Guo, Qinghai; Liu, Jian; Wang, Run

    2014-08-01

    Scientific interpretation of the relationships between urban landscape patterns and water quality is important for sustainable urban planning and watershed environmental protection. This study applied the ordinary least squares regression model and the geographically weighted regression model to examine the spatially varying relationships between 12 explanatory variables (including three topographical factors, four land use parameters, and five landscape metrics) and 15 water quality indicators in watersheds of Yundang Lake, Maluan Bay, and Xinglin Bay with varying levels of urbanization in Xiamen City, China. A local and global investigation was carried out at the watershed-level, with 50 and 200 m riparian buffer scales. This study found that topographical features and landscape metrics are the dominant factors of water quality, while land uses are too weak to be considered as a strong influential factor on water quality. Such statistical results may be related with the characteristics of land use compositions in our study area. Water quality variations in the 50 m buffer were dominated by topographical variables. The impact of landscape metrics on water quality gradually strengthen with expanding buffer zones. The strongest relationships are obtained in entire watersheds, rather than in 50 and 200 m buffer zones. Spatially varying relationships and effective buffer zones were verified in this study. Spatially varying relationships between explanatory variables and water quality parameters are more diversified and complex in less urbanized areas than in highly urbanized areas. This study hypothesizes that all these varying relationships may be attributed to the heterogeneity of landscape patterns in different urban regions. Adjustment of landscape patterns in an entire watershed should be the key measure to successfully improving urban lake water quality.

  3. Assessment on air quality pattern: a case study in Putrajaya, Malaysia

    African Journals Online (AJOL)

    Nowadays, air quality problem has become a major issue in Malaysia for the past two decades, This study aims to determine the pattern of the air quality status, investigate the significant pollutant, relationship between air pollutants and API and evaluate the pattern of air pollution. Data from Putrajaya monitoring station ...

  4. Weekly patterns, diet quality and energy balance.

    Science.gov (United States)

    McCarthy, Sinéad

    2014-07-01

    Human behaviour is made up of many repeated patterns and habitual behaviours. Our day to day lives are punctuated by work, education, domestic chores, sleep and food. Changes in daily patterns such as not working in paid employment or attending school on the weekend contribute significantly to changes in dietary patterns of food consumption, patterns of physical activity and ultimately energy balance. The aim of this paper is to adopt a life-course perspective and explore the changes in dietary quality and physical activity patterns across the week from young children to elderly adults with a focus on Western cultures. Research literature indicates that the dietary quality is somewhat poorer on the weekends, characterised by higher fat intakes, higher alcohol intakes and consequently higher energy intakes. This increase in energy intake is not necessarily offset by an increase in activity, rather an increase in sedentary behaviours. Some research has observed an increase of more than 100 cal per day over the weekend in American adults. Over the course of one year, this can result in a significant increase in body mass. Some of the interventions in tackling obesity and diet related behaviours must focus on the changes in the weekend behaviour of consumers in terms of both food and activity. These efforts should also focus on increasing consumer awareness of the long term consequences of the short lived weekend excess as well as putting in place practical measures and interventions that are evidence based and targeted to consumer needs. Copyright © 2014 Elsevier Inc. All rights reserved.

  5. Spectroscopic vector analysis for fast pattern quality monitoring

    Science.gov (United States)

    Sohn, Younghoon; Ryu, Sungyoon; Lee, Chihoon; Yang, Yusin

    2018-03-01

    In semiconductor industry, fast and effective measurement of pattern variation has been key challenge for assuring massproduct quality. Pattern measurement techniques such as conventional CD-SEMs or Optical CDs have been extensively used, but these techniques are increasingly limited in terms of measurement throughput and time spent in modeling. In this paper we propose time effective pattern monitoring method through the direct spectrum-based approach. In this technique, a wavelength band sensitive to a specific pattern change is selected from spectroscopic ellipsometry signal scattered by pattern to be measured, and the amplitude and phase variation in the wavelength band are analyzed as a measurement index of the pattern change. This pattern change measurement technique is applied to several process steps and verified its applicability. Due to its fast and simple analysis, the methods can be adapted to the massive process variation monitoring maximizing measurement throughput.

  6. High-resolution patterning of graphene by screen printing with a silicon stencil for highly flexible printed electronics.

    Science.gov (United States)

    Hyun, Woo Jin; Secor, Ethan B; Hersam, Mark C; Frisbie, C Daniel; Francis, Lorraine F

    2015-01-07

    High-resolution screen printing of pristine graphene is introduced for the rapid fabrication of conductive lines on flexible substrates. Well-defined silicon stencils and viscosity-controlled inks facilitate the preparation of high-quality graphene patterns as narrow as 40 μm. This strategy provides an efficient method to produce highly flexible graphene electrodes for printed electronics. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  7. Qualitative Analysis of the Impact of SOA Patterns on Quality Attributes

    NARCIS (Netherlands)

    Galster, Matthias; Avgeriou, Paris; Tang, A; Muccini, H

    2012-01-01

    Software architecture patterns are proven and reusable solutions to common architecture design problems. One characteristic of architecture patterns is that they affect quality attributes (e.g., performance, reliability). Over the past years, architecture patterns for service-based systems have been

  8. Dietary pattern and health-related quality of life among breast cancer survivors.

    Science.gov (United States)

    Kim, Na-Hui; Song, Sihan; Jung, So-Youn; Lee, Eunsook; Kim, Zisun; Moon, Hyeong-Gon; Noh, Dong-Young; Lee, Jung Eun

    2018-05-10

    There is limited evidence for the association between dietary pattern and quality of life among breast cancer survivors. We examined the association between dietary patterns and health-related quality of life (HRQoL) among Korean breast cancer survivors. Our study included a total of 232 women, aged 21 to 79 years, who had been diagnosed with stage I to III breast cancer and who underwent breast cancer surgery at least 6 months prior to our baseline evaluation. We assessed HRQoL using the European Organization for Research and Treatment of Cancer Quality of Life Questionnaire Core 30 (EORTC QLQ-C30) and the Quality of Life Questionnaire Breast Cancer Module 23 (QLQ-BR23). We conducted a factor analysis to identify the major dietary patterns and used a generalized linear model to obtain the least squares mean (LS mean) and 95% confidence interval (CI) for HRQoL according to the dietary pattern scores. We identified 2 major dietary patterns: the Healthy dietary pattern and the Western dietary pattern. We found that breast cancer survivors who had higher Healthy dietary pattern scores tended to have lower dyspnea scores but higher insomnia scores, compared to breast cancer survivors with lower Healthy dietary pattern scores. For dyspnea, the LS mean (95% CI) was 8.86 (5.05-15.52) in the bottom quartile and 2.87 (1.62-5.08) in the top quartile (p for trend = 0.005). This association was limited to survivors with stage I for dyspnea or survivors with stage II or III for insomnia. Healthy dietary patterns were associated with better scores for dyspnea but worse scores for insomnia among breast cancer survivors. Other components of EORTC QLQ did not vary by dietary patterns overall, but they warrant further investigation for subgroups of breast cancer survivors.

  9. Snacking patterns, diet quality, and cardiovascular risk factors in adults

    Science.gov (United States)

    The relationship of snacking patterns on nutrient intake and cardiovascular risk factors in adults is unknown. The aim of this study was to examine the associations of snacking patterns with nutrient intake, diet quality, and a selection of cardiovascular risk factors in adults participating in the ...

  10. Breakfast Dietary Patterns among Mexican Children Are Related to Total-Day Diet Quality.

    Science.gov (United States)

    Afeiche, Myriam C; Taillie, Lindsey Smith; Hopkins, Sinead; Eldridge, Alison L; Popkin, Barry M

    2017-03-01

    Background: Mexico has experienced shifts in food availability and consumption patterns over the past few decades from traditional diets to those containing more high-energy density foods, resulting in the development of unhealthful dietary patterns among children and adults. However, to our knowledge it is not known whether breakfast consumption patterns contribute to the overall daily diet of Mexican children. Objective: We examined total-day diet among breakfast consumers compared with breakfast skippers, identified and investigated breakfast dietary patterns in relation to energy and nutrient intakes at breakfast and across the day, and examined these patterns in relation to sociodemographic characteristics. Methods: With the use of nationally representative dietary data (one 24-h recall) from the 2012 Mexican National Health and Nutrition Survey, 3760 children aged 4-13 y were categorized into mutually exclusive breakfast patterns with the use of cluster analysis. The association between breakfast patterns and breakfast skippers with dietary intake at breakfast and for the total day was investigated with the use of multivariate linear regression. Results: Most children (83%) consumed breakfast. Six breakfast dietary patterns were identified (milk and sweetened breads, tortillas and beans, sweetened beverages, sandwiches and quesadillas, eggs, and cereal and milk) and reflected both traditional and more Westernized dietary patterns. Sugar-sweetened beverages were consumed across all patterns. Compared with all breakfast dietary patterns, breakfast skippers had the lowest intake of several nutrients of public health concern. Nutrients to limit that were high at breakfast tended to be high for the total day and vice versa for nutrients to encourage. Conclusions: There was not a single pattern that complied perfectly with the Mexican School Breakfast Guidelines, but changes such as increasing dietary fiber by encouraging more whole grains, fruits, vegetables, and

  11. Investigating the effect of electron emission pattern on RF gun beam quality

    Energy Technology Data Exchange (ETDEWEB)

    Rajabi, A. [Laser and Plasma Research Institute, Shahid Beheshti University, G.C., Velenjak, 1983963113, Tehran (Iran, Islamic Republic of); Shokri, B., E-mail: b-shokri@sbu.ac.ir [Laser and Plasma Research Institute, Shahid Beheshti University, G.C., Velenjak, 1983963113, Tehran (Iran, Islamic Republic of); Physics Department, Shahid Beheshti University, G.C., Velenjak, 1983963113, Tehran (Iran, Islamic Republic of)

    2016-05-11

    Thermionic radio frequency gun is one of the most promising choices to gain a high quality electron beam, used in the infrared free electron lasers and synchrotron radiation injectors. To study the quality of the beam in a compact electron source, the emission pattern effect on the beam dynamics should be investigated. In the presented work, we developed a 3D simulation code to model the real process of thermionic emission and to investigate the effect of emission pattern, by considering geometrical constraints, on the beam dynamics. According to the results, the electron bunch emittance varies considerably with the emission pattern. Simulation results have been validated via comparison with the well-known simulation codes such as ASTRA simulation code and CST microwave studio, as well as other simulation results in the literature. It was also demonstrated that by using a continuous wave laser beam for heating the cathode, the emission pattern full width at half maximum (FWHM) of the transverse emission distribution is proportional to FWHM of the Gaussian profile for the laser beam. Additionally, by using the developed code, the effect of wall structure around the cathode on the back bombardment effect has been studied. According to the results, for a stable operation of the RF gun, one should consider the nose cone in vicinity of the cathode surface to reduce the back-bombardment effect. - Highlights: • We developed a 3D code to simulate the beam dynamics of thermionic RF gun. • Te impact of the emission pattern on the beam dynamic was investigated. • Different emission pattern results different emittance in the gun exit. • Using a nosecone around the cathode adjacent wall reduces back bombardment effect.

  12. Luminance and image quality analysis of an organic electroluminescent panel with a patterned microlens array attachment

    International Nuclear Information System (INIS)

    Lin, Hoang Yan; Chen, Kuan-Yu; Ho, Yu-Hsuan; Fang, Jheng-Hao; Hsu, Sheng-Chih; Lee, Jiun-Haw; Lin, Jia-Rong; Wei, Mao-Kuo

    2010-01-01

    Luminance and image quality observed from the normal direction of a commercial 2.0 inch panel based on organic electroluminescence (OEL) technology attached to regular and patterned microlens array films (MAFs) were studied and analyzed. When applying the regularly arranged MAF on the panel, a luminance enhancement of 23% was observed, accompanied by a reduction of the image quality index as low as 74%. By removing the microlenses on the emitting areas, the patterned MAF enhances the luminance efficiency of the OEL by 52% keeping the image quality index of the display as high as 94%, due to the effective light extraction in the glass substrate being less than the critical angle. 3D simulation based on a ray-tracing model was also established to investigate the spatial distribution of light rays radiated from an OEL pixel with different microstructures which showed consistent results with the experimental results

  13. Associations Between Dietary Patterns and Longitudinal Quality of Life Changes in Colorectal Cancer Patients: The ColoCare Study.

    Science.gov (United States)

    Gigic, Biljana; Boeing, Heiner; Toth, Reka; Böhm, Jürgen; Habermann, Nina; Scherer, Dominique; Schrotz-King, Petra; Abbenhardt-Martin, Clare; Skender, Stephanie; Brenner, Hermann; Chang-Claude, Jenny; Hoffmeister, Michael; Syrjala, Karen; Jacobsen, Paul B; Schneider, Martin; Ulrich, Alexis; Ulrich, Cornelia M

    2018-01-01

    Quality of life (QoL) is an important clinical outcome in cancer patients. We investigated associations between dietary patterns and QoL changes in colorectal cancer (CRC) patients. The study included 192 CRC patients with available EORTC QLQ-C30 data before and 12 months post-surgery and food frequency questionnaire data at 12 months post-surgery. Principal component analysis was used to identify dietary patterns. Multivariate regression models assessed associations between dietary patterns and QoL changes over time. We identified four major dietary patterns: "Western" dietary pattern characterized by high consumption of potatoes, red and processed meat, poultry, and cakes, "fruit&vegetable" pattern: high intake of vegetables, fruits, vegetable oils, and soy products, "bread&butter" pattern: high intake of bread, butter and margarine, and "high-carb" pattern: high consumption of pasta, grains, nonalcoholic beverages, sauces and condiments. Patients following a "Western" diet had lower chances to improve in physical functioning (OR = 0.45 [0.21-0.99]), constipation (OR = 0.30 [0.13-0.72]) and diarrhea (OR: 0.44 [0.20-0.98]) over time. Patients following a "fruit&vegetable" diet showed improving diarrhea scores (OR: 2.52 [1.21-5.34]. A "Western" dietary pattern after surgery is inversely associated with QoL in CRC patients, whereas a diet rich in fruits and vegetables may be beneficial for patients' QoL over time.

  14. Spatial and temporal air quality pattern recognition using environmetric techniques: a case study in Malaysia.

    Science.gov (United States)

    Syed Abdul Mutalib, Sharifah Norsukhairin; Juahir, Hafizan; Azid, Azman; Mohd Sharif, Sharifah; Latif, Mohd Talib; Aris, Ahmad Zaharin; Zain, Sharifuddin M; Dominick, Doreena

    2013-09-01

    The objective of this study is to identify spatial and temporal patterns in the air quality at three selected Malaysian air monitoring stations based on an eleven-year database (January 2000-December 2010). Four statistical methods, Discriminant Analysis (DA), Hierarchical Agglomerative Cluster Analysis (HACA), Principal Component Analysis (PCA) and Artificial Neural Networks (ANNs), were selected to analyze the datasets of five air quality parameters, namely: SO2, NO2, O3, CO and particulate matter with a diameter size of below 10 μm (PM10). The three selected air monitoring stations share the characteristic of being located in highly urbanized areas and are surrounded by a number of industries. The DA results show that spatial characterizations allow successful discrimination between the three stations, while HACA shows the temporal pattern from the monthly and yearly factor analysis which correlates with severe haze episodes that have happened in this country at certain periods of time. The PCA results show that the major source of air pollution is mostly due to the combustion of fossil fuel in motor vehicles and industrial activities. The spatial pattern recognition (S-ANN) results show a better prediction performance in discriminating between the regions, with an excellent percentage of correct classification compared to DA. This study presents the necessity and usefulness of environmetric techniques for the interpretation of large datasets aiming to obtain better information about air quality patterns based on spatial and temporal characterizations at the selected air monitoring stations.

  15. Automatic Classification of Station Quality by Image Based Pattern Recognition of Ppsd Plots

    Science.gov (United States)

    Weber, B.; Herrnkind, S.

    2017-12-01

    The number of seismic stations is growing and it became common practice to share station waveform data in real-time with the main data centers as IRIS, GEOFON, ORFEUS and RESIF. This made analyzing station performance of increasing importance for automatic real-time processing and station selection. The value of a station depends on different factors as quality and quantity of the data, location of the site and general station density in the surrounding area and finally the type of application it can be used for. The approach described by McNamara and Boaz (2006) became standard in the last decade. It incorporates a probability density function (PDF) to display the distribution of seismic power spectral density (PSD). The low noise model (LNM) and high noise model (HNM) introduced by Peterson (1993) are also displayed in the PPSD plots introduced by McNamara and Boaz allowing an estimation of the station quality. Here we describe how we established an automatic station quality classification module using image based pattern recognition on PPSD plots. The plots were split into 4 bands: short-period characteristics (0.1-0.8 s), body wave characteristics (0.8-5 s), microseismic characteristics (5-12 s) and long-period characteristics (12-100 s). The module sqeval connects to a SeedLink server, checks available stations, requests PPSD plots through the Mustang service from IRIS or PQLX/SQLX or from GIS (gempa Image Server), a module to generate different kind of images as trace plots, map plots, helicorder plots or PPSD plots. It compares the image based quality patterns for the different period bands with the retrieved PPSD plot. The quality of a station is divided into 5 classes for each of the 4 bands. Classes A, B, C, D define regular quality between LNM and HNM while the fifth class represents out of order stations with gain problems, missing data etc. Over all period bands about 100 different patterns are required to classify most of the stations available on the

  16. Observations on quality senior health business: success patterns and policy implications.

    Science.gov (United States)

    Yang, Ya-Ting; Hsu, Yi-Hsin Elsa; Chen, Ya-Mei; Su, Shyi; Chang, Yao-Mao; Iqbal, Usman; Yujiro, Handa; Lin, Neng-Pai

    2016-04-01

    Population ageing is a global issue that affects almost every country. Most ageing researches focused on demand side and studies related to supply side were relatively scarce. This study selected quality enterprises focus on ageing health and analysed their patterns on providing quality services successfully. Our study selected quality senior health enterprises and explored their success patterns through face-to-face semi-structured in-depth interviews with CEO of each enterprise in 2013. Thirty-three quality senior health enterprises in Taiwan. Thirty-three CEO's of enterprises were interviewed individually. None. Core values and vision, historical development, organization structure, services/products provided, delivering channels, customer relationships and further development strategies. Our results indicated success patterns for senior enterprises that there were meeting diversified lifestyles and substitutive needs for the elderly and their caregivers, providing a total solution for actual/virtual integration and flexible one-stop shopping services. We classified these enterprises by used degree of clicks-and-mortar of services and residing situation of the elderly. Industry characteristics and policy implications were summarized. Our observations will serve as a primary evidenced base for enterprises developing their senior market, and also for opening dialogue between customers and enterprises to facilitate valuable opportunities for co-creation between the supply and demand sides. © The Author 2016. Published by Oxford University Press in association with the International Society for Quality in Health Care; all rights reserved.

  17. Patterned growth of carbon nanotubes obtained by high density plasma chemical vapor deposition

    Science.gov (United States)

    Mousinho, A. P.; Mansano, R. D.

    2015-03-01

    Patterned growth of carbon nanotubes by chemical vapor deposition represents an assembly approach to place and orient nanotubes at a stage as early as when they are synthesized. In this work, the carbon nanotubes were obtained at room temperature by High Density Plasmas Chemical Vapor Deposition (HDPCVD) system. This CVD system uses a new concept of plasma generation, where a planar coil coupled to an RF system for plasma generation was used with an electrostatic shield for plasma densification. In this mode, high density plasmas are obtained. We also report the patterned growth of carbon nanotubes on full 4-in Si wafers, using pure methane plasmas and iron as precursor material (seed). Photolithography processes were used to pattern the regions on the silicon wafers. The carbon nanotubes were characterized by micro-Raman spectroscopy, the spectra showed very single-walled carbon nanotubes axial vibration modes around 1590 cm-1 and radial breathing modes (RBM) around 120-400 cm-1, confirming that high quality of the carbon nanotubes obtained in this work. The carbon nanotubes were analyzed by atomic force microscopy and scanning electron microscopy too. The results showed that is possible obtain high-aligned carbon nanotubes with patterned growth on a silicon wafer with high reproducibility and control.

  18. Similarity-dissimilarity plot for visualization of high dimensional data in biomedical pattern classification.

    Science.gov (United States)

    Arif, Muhammad

    2012-06-01

    In pattern classification problems, feature extraction is an important step. Quality of features in discriminating different classes plays an important role in pattern classification problems. In real life, pattern classification may require high dimensional feature space and it is impossible to visualize the feature space if the dimension of feature space is greater than four. In this paper, we have proposed a Similarity-Dissimilarity plot which can project high dimensional space to a two dimensional space while retaining important characteristics required to assess the discrimination quality of the features. Similarity-dissimilarity plot can reveal information about the amount of overlap of features of different classes. Separable data points of different classes will also be visible on the plot which can be classified correctly using appropriate classifier. Hence, approximate classification accuracy can be predicted. Moreover, it is possible to know about whom class the misclassified data points will be confused by the classifier. Outlier data points can also be located on the similarity-dissimilarity plot. Various examples of synthetic data are used to highlight important characteristics of the proposed plot. Some real life examples from biomedical data are also used for the analysis. The proposed plot is independent of number of dimensions of the feature space.

  19. A long way to quality-driven pattern-based architecting

    NARCIS (Netherlands)

    Me, Gianantonio; Calero, Coral; Lago, Patricia

    2016-01-01

    The relation between architectural patterns (or styles) and quality attributes has been widely addressed in the literature. However, the knowledge is fragmented over a wide range of heterogeneous studies. Our aim is to build a systematic body of knowledge to support architectural decision-making and

  20. Patterns of fish diversity and assemblage structure and water quality in the longest Asian tropical river (Mekong)

    Science.gov (United States)

    Chea, R.; Lek, S.; Grenouillet, G.

    2016-12-01

    Although the Mekong River is one of the world's 35 biodiversity hotspots, the large-scale patterns of fish diversity and assemblage structure remain poorly addressed. The present study aimed to investigate the spatial variability of water quality in the Lower Mekong Basin and the fish distribution patterns in the Lower Mekong River (LMR) and to identify their environmental determinants. Daily fish catch data at 38 sites distributed along the LMR were related to 15 physicochemical and 19 climatic variables. As a result, four different clusters were defined according to the similarity in assemblage composition and 80 indicator species were identified. While fish species richness was highest in the Mekong delta and lowest in the upper part of the LMR, the diversity index was highest in the middle part of the LMR and lowest in the delta. We found that fish assemblages changed along the environmental gradients and that the main drivers affecting the fish assemblage structure were the seasonal variation of temperature, precipitation, dissolved oxygen, pH, and total phosphorus. Specifically, upstream assemblages were characterized by cyprinids and Pangasius catfish, well suited to low temperature, high dissolved oxygen and high pH. Fish assemblages in the delta were dominated by perch-like fish and clupeids, more tolerant to high temperatures, and high levels of nutrients (nitrates and total phosphorus) and salinity. Overall, the patterns were consistent between seasons. Our study contributes to establishing the first holistic fish community study in the LMR. Overall of the LMR water quality, we found that the water in the mainstream was less polluted than its tributaries; eutrophication and salinity could be key factors affecting water quality in LMR. Moreover, the seasonal variation of water quality seemed to be less marked than spatial variation occurring along the longitudinal gradient of Mekong River. Significant degradations were mainly associated with human

  1. Self-Organized Crystallization Patterns from Evaporating Droplets of Common Wheat Grain Leakages as a Potential Tool for Quality Analysis

    Directory of Open Access Journals (Sweden)

    Maria Olga Kokornaczyk

    2011-01-01

    Full Text Available We studied the evaporation-induced pattern formation in droplets of common wheat kernel leakages prepared out of ancient and modern wheat cultivars as a possible tool for wheat quality analysis. The experiments showed that the substances which passed into the water during the soaking of the kernels created crystalline structures with different degrees of complexity while the droplets were evaporating. The forms ranged from spots and simple structures with single ramifications, through dendrites, up to highly organized hexagonal shapes and fractal-like structures. The patterns were observed and photographed using dark field microscopy in small magnifications. The evaluation of the patterns was performed both visually and by means of the fractal dimension analysis. From the results, it can be inferred that the wheat cultivars differed in their pattern-forming capacities. Two of the analyzed wheat cultivars showed poor pattern formation, whereas another two created well-formed and complex patterns. Additionally, the wheat cultivars were analyzed for their vigor by means of the germination test and measurement of the electrical conductivity of the grain leakages. The results showed that the more vigorous cultivars also created more complex patterns, whereas the weaker cultivars created predominantly poor forms. This observation suggests a correlation between the wheat seed quality and droplet evaporation patterns.

  2. Landscaping practices, land use patterns and stormwater quantity and quality in urban watersheds

    Science.gov (United States)

    Miles, B.; Band, L. E.

    2011-12-01

    Increasing quantity and decreasing quality of urban stormwater threatens biodiversity in local streams and reservoirs, jeopardizes water supplies, and ultimately contributes to estuarine eutrophication. To estimate the effects that present and alternative landscaping practices and land use patterns may have on urban stormwater quantity and quality, simulations of existing land use/land cover using the Regional Hydro-Ecologic Simulation System (RHESSys), a process-based surface hydrology and biogeochemistry model, were developed for watersheds in Baltimore, MD (as part of the Baltimore Ecosystem Study (BES) NSF Long-Term Ecological Research (LTER) site) and Durham, NC (as part of the NSF Urban Long-Term Research Area (ULTRA) program). The influence of land use patterns and landscaping practices on nutrient export in urban watersheds has been explored as part of the BES; this work has focused on improving our understanding of how residential landscaping practices (i.e. lawn fertilization rates) vary across land use and socioeconomic gradients. Elsewhere, others have explored the political ecology of residential landscaping practices - seeking to understand the economic, political, and cultural influences on the practice of high-input residential turf-grass management. Going forward, my research will synthesize and extend this prior work. Rather than pre-supposing predominant residential land use patterns and landscaping practices (i.e. lower-density periphery development incorporating high-input turf landscapes) alternate land use and landscaping scenarios (e.g. higher-density/transit-oriented development, rain gardens, vegetable gardens, native plant/xeriscaping) will be developed through interviews/focus groups with stakeholders (citizens, public officials, developers, non-profits). These scenarios will then be applied to the RHESSys models already developed for catchments in Baltimore and Durham. The modeled scenario results will be used to identify alternate land

  3. A guide to calculating habitat-quality metrics to inform conservation of highly mobile species

    Science.gov (United States)

    Bieri, Joanna A.; Sample, Christine; Thogmartin, Wayne E.; Diffendorfer, James E.; Earl, Julia E.; Erickson, Richard A.; Federico, Paula; Flockhart, D. T. Tyler; Nicol, Sam; Semmens, Darius J.; Skraber, T.; Wiederholt, Ruscena; Mattsson, Brady J.

    2018-01-01

    Many metrics exist for quantifying the relative value of habitats and pathways used by highly mobile species. Properly selecting and applying such metrics requires substantial background in mathematics and understanding the relevant management arena. To address this multidimensional challenge, we demonstrate and compare three measurements of habitat quality: graph-, occupancy-, and demographic-based metrics. Each metric provides insights into system dynamics, at the expense of increasing amounts and complexity of data and models. Our descriptions and comparisons of diverse habitat-quality metrics provide means for practitioners to overcome the modeling challenges associated with management or conservation of such highly mobile species. Whereas previous guidance for applying habitat-quality metrics has been scattered in diversified tracks of literature, we have brought this information together into an approachable format including accessible descriptions and a modeling case study for a typical example that conservation professionals can adapt for their own decision contexts and focal populations.Considerations for Resource ManagersManagement objectives, proposed actions, data availability and quality, and model assumptions are all relevant considerations when applying and interpreting habitat-quality metrics.Graph-based metrics answer questions related to habitat centrality and connectivity, are suitable for populations with any movement pattern, quantify basic spatial and temporal patterns of occupancy and movement, and require the least data.Occupancy-based metrics answer questions about likelihood of persistence or colonization, are suitable for populations that undergo localized extinctions, quantify spatial and temporal patterns of occupancy and movement, and require a moderate amount of data.Demographic-based metrics answer questions about relative or absolute population size, are suitable for populations with any movement pattern, quantify demographic

  4. Associations of key diet-quality indexes with mortality in the Multiethnic Cohort: the Dietary Patterns Methods Project.

    Science.gov (United States)

    Harmon, Brook E; Boushey, Carol J; Shvetsov, Yurii B; Ettienne, Reynolette; Reedy, Jill; Wilkens, Lynne R; Le Marchand, Loic; Henderson, Brian E; Kolonel, Laurence N

    2015-03-01

    Healthy dietary patterns have been linked positively with health and longevity. However, prospective studies in diverse populations in the United States addressing dietary patterns and mortality are limited. We assessed the ability of the following 4 diet-quality indexes [the Healthy Eating Index-2010 (HEI-2010), the Alternative HEI-2010 (AHEI-2010), the alternate Mediterranean diet score (aMED), and the Dietary Approaches to Stop Hypertension (DASH)] to predict the reduction in risk of mortality from all causes, cardiovascular disease (CVD), and cancer. White, African American, Native Hawaiian, Japanese American, and Latino adults (n = 215,782) from the Multiethnic Cohort completed a quantitative food-frequency questionnaire. Scores for each dietary index were computed and divided into quintiles for men and women. Mortality was documented over 13-18 y of follow-up. HRs and 95% CIs were computed by using adjusted Cox models. High HEI-2010, AHEI-2010, aMED, and DASH scores were all inversely associated with risk of mortality from all causes, CVD, and cancer in both men and women (P-trend dietary pattern that achieves a high diet-quality index score is associated with lower risk of mortality from all causes, CVD, and cancer in adult men and women. © 2015 American Society for Nutrition.

  5. The Desire for (Danish) Quality in High and Low Income Countries

    DEFF Research Database (Denmark)

    Nguyen, Daniel Xuyen

    with sales. These correlations are significantly different across destination countries within product categories, but across years for a given product-destination pair. While some existing theories perform better than others at predicting these patterns, none can reconcile the variation across countries......We estimate the correlation between firm prices and sales within a CN8 product-country-year market. We do this for every market to which at least 16 different Danish firms exported between 1999 and 2006. Approximately 60% of Danish exports are to markets in which the price is negatively correlated....... To fully explain the patterns, We introduce a model in which the price-sales correlation can be interpreted as the market's desire for high quality goods over low cost substitutes. We discover an inverted U shaped relation between a country's desire for quality and its per capita GDP, which we term...

  6. Nutritional quality of dietary patterns of children: are there differences inside and outside school?

    Directory of Open Access Journals (Sweden)

    Diva Aliete dos Santos Vieira

    2017-01-01

    Conclusion: There are differences in the nutritional quality of dietary patterns inside and outside school, and heterogeneity in adherence to these patterns were observed across regions and socioeconomic classes.

  7. Convenience-based food purchase patterns: identification and associations with dietary quality, sociodemographic factors and attitudes.

    Science.gov (United States)

    Peltner, Jonas; Thiele, Silke

    2018-02-01

    The present study aimed to derive food purchase patterns considering the convenience level of foods. Associations between identified patterns and dietary quality were analysed, as well as household characteristics associated with the dietary patterns. A Convenience Food Classification Scheme (CFCS) was developed. After classifying basic food groups into the CFCS, the formed groups were used to apply a factor analysis to identify convenience-based food purchase patterns. For these patterns nutrient and energy densities were examined. Using regression analysis, associations between the adherence to the patterns and household characteristic and attitude variables were analysed. The study used representative German food purchase data from 2011. Approximately 12 million purchases of 13 131 households were recorded in these data. Three convenience-based patterns were identified: a low-convenience, a semi-convenience and a ready-to-eat food pattern. Tighter adherence to the semi-convenience pattern was shown to result in the lowest nutrient and highest energy densities. Important factors influencing adherence to the patterns were household size, presence of children and attitudes. Working full-time was negatively associated with adherence to the low-convenience pattern and positively with the ready-to-eat pattern. Convenience foods were an important part of households' food baskets which in some cases led to lower nutritional quality. Therefore, it is important to offer convenience foods higher in nutrient density and lower in energy density. Interventions targeted on enhancing cooking skills could be an effective strategy to increase purchases of unprocessed foods, which, in turn, could also contribute to an improved diet quality.

  8. Extracting Patterns from Educational Traces via Clustering and Associated Quality Metrics

    NARCIS (Netherlands)

    Mihaescu, Marian; Tanasie, Alexandru; Dascalu, Mihai; Trausan-Matu, Stefan

    2016-01-01

    Clustering algorithms, pattern mining techniques and associated quality metrics emerged as reliable methods for modeling learners’ performance, comprehension and interaction in given educational scenarios. The specificity of available data such as missing values, extreme values or outliers,

  9. The quality of high-energy X-ray beams

    International Nuclear Information System (INIS)

    LaRiviere, P.D.

    1989-01-01

    Supplement 17 of the British Journal of Radiology is a survey of central-axis depth doses for radiotherapy machines, patterned largely on BJR Supplement 11 (1972). Inspection of high-energy X-ray depth doses for a 10 x 10 cm field at an SSD of 100 cm disclosed large differences between the two sets of data, especially for qualities above 8 MV, e.g. a depth dose of 80% at 10 cm is rated at about 19 MV according to BJR Supplement 11, and 23 MV according to BJR Supplement 17. It was found that Supplement 17 depth-dose data above 8 MV were erratic, but Supplement 11 data could be represented by an analytical expression, providing a unique means of assigning MV quality. It was also found that dose-weighted average energy of the filtered beam plotted smoothly against depth dose. For dosimetric purposes, it is suggested that this parameter be used as a true measure of beam quality, removing discrepancies introduced by the use of nominal MV for this purpose. (author)

  10. From image processing to classification: IV. Classification of electrophoretic patterns by neural networks and statistical methods enable quality assessment of wheat varieties for breadmaking

    DEFF Research Database (Denmark)

    Jensen, Kirsten; Kesmir, Can; Søndergaard, Ib

    1996-01-01

    The end-use quality of products made from doughs consisting of wheat flour and water is often dependent upon the storage (gluten) proteins of the grain endosperm. Today the electrophoretic patterns of the high molecular weight (HMW) glutenin subunits are used for quality selections in wheat breed...

  11. Association between diet quality, dietary patterns and cardiometabolic health in Australian adults: a cross-sectional study.

    Science.gov (United States)

    Livingstone, Katherine M; McNaughton, Sarah A

    2018-02-12

    Diet quality indices score dietary intakes against recommendations, whereas dietary patterns consider the pattern and combination of dietary intakes. Studies evaluating both methodologies in relation to cardiometabolic health in a nationally representative sample are limited. The aim of the present study was to investigate the relationship between diet quality, dietary patterns and markers of cardiometabolic health in Australian adults. Dietary data, using two 24-h dietary recalls, were collected from adults in the cross-sectional Australian Health Survey 2011-2013 (n = 2121; 46.4 (SE 0.48) years). Diet quality was estimated using the Dietary Guideline Index (DGI). Dietary patterns (DPs), derived using reduced rank regression, were estimated using fiber density, SFA: PUFA and total sugars intake as intermediate markers. Multi-variable adjusted linear regression analyses were used to examine associations between diet quality and DPs and blood biomarkers, body mass index, waist circumference, diastolic and systolic blood pressure and an overall cardiometabolic risk score. DGI was associated with lower glucose (coef - 0.009, SE 0.004; P-trend = 0.033), body mass index (coef - 0.017, SE 0.007; P-trend = 0.019) and waist circumference (coef - 0.014, SE 0.005; P-trend = 0.008). Two dietary patterns were derived: dietary pattern-1 was characterized by higher intakes of pome fruit and wholegrain bread, while dietary pattern-2 was characterized by higher intakes of added sugars and tropical fruit. Dietary pattern-1 was associated with lower body mass index (coef - 0.028, SE 0.007; P-trendDietary pattern-2 was associated with lower HDL-cholesterol (coef - 0.026, SE 0.012; P-trend = 0.028). There was a trend towards lower diastolic blood pressure. No associations with other markers were observed. Better diet quality and healthier dietary patterns were primarily associated with favorable anthropometric markers of cardiometabolic health. Findings

  12. Strong adherence to a healthy dietary pattern is associated with better semen quality, especially in men with poor semen quality.

    Science.gov (United States)

    Oostingh, Elsje C; Steegers-Theunissen, Régine P M; de Vries, Jeanne H M; Laven, Joop S E; Koster, Maria P H

    2017-04-01

    To study associations between periconceptional dietary patterns and semen quality parameters. Prospective periconception cohort study. Tertiary hospital. One hundred and twenty-nine male partners of pregnant women who participated in the Rotterdam Periconception Cohort (Predict study). None. Semen quality parameters-ejaculate volume, sperm concentration, total sperm count, progressive motility, immotile sperm, and total motile sperm count (TMSC). Men included in our study were on average 35 (±6 standard deviation) years old and had a body mass index of 26.4 ± 4 kg/m 2 . Two dietary patterns were identified using principle component analysis, which were labeled as "healthy" and "unhealthy." An increase of one factor score (stated as β) represented an increase of 1 standard deviation. Sperm concentration (β = 0.278; 95% CI, 0.112-0.444), total sperm count (β = 1.369; 95% CI, 0.244-2.495), progressive motility (β = 4.305; 95% CI, 0.675-7.936), and TMSC (β = 0.319; 95% CI, 0.113-0.526) were all positively associated with a strong adherence to the healthy dietary pattern. Subgroup analysis showed that these associations were mainly present in men with a TMSC strong adherence to the unhealthy dietary pattern. The positive associations between strong adherence to a healthy dietary pattern and semen parameters in men with poor semen quality support the importance of preconceptional tailored nutritional counseling and coaching of couples who are trying to conceive. Copyright © 2017 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

  13. Pattern centric design based sensitive patterns and process monitor in manufacturing

    Science.gov (United States)

    Hsiang, Chingyun; Cheng, Guojie; Wu, Kechih

    2017-03-01

    When design rule is mitigating to smaller dimension, process variation requirement is tighter than ever and challenges the limits of device yield. Masks, lithography, etching and other processes have to meet very tight specifications in order to keep defect and CD within the margins of the process window. Conventionally, Inspection and metrology equipments are utilized to monitor and control wafer quality in-line. In high throughput optical inspection, nuisance and review-classification become a tedious labor intensive job in manufacturing. Certain high-resolution SEM images are taken to validate defects after optical inspection. These high resolution SEM images catch not only optical inspection highlighted point, also its surrounding patterns. However, this pattern information is not well utilized in conventional quality control method. Using this complementary design based pattern monitor not only monitors and analyzes the variation of patterns sensitivity but also reduce nuisance and highlight defective patterns or killer defects. After grouping in either single or multiple layers, systematic defects can be identified quickly in this flow. In this paper, we applied design based pattern monitor in different layers to monitor process variation impacts on all kinds of patterns. First, the contour of high resolutions SEM image is extracted and aligned to design with offset adjustment and fine alignment [1]. Second, specified pattern rules can be applied on design clip area, the same size as SEM image, and form POI (pattern of interest) areas. Third, the discrepancy of contour and design measurement at different pattern types in measurement blocks. Fourth, defective patterns are reported by discrepancy detection criteria and pattern grouping [4]. Meanwhile, reported pattern defects are ranked by number and severity by discrepancy. In this step, process sensitive high repeatable systematic defects can be identified quickly Through this design based process pattern

  14. Egg Speckling Patterns Do Not Advertise Offspring Quality or Influence Male Provisioning in Great Tits

    Science.gov (United States)

    Stoddard, Mary Caswell; Fayet, Annette L.; Kilner, Rebecca M.; Hinde, Camilla A.

    2012-01-01

    Many passerine birds lay white eggs with reddish brown speckles produced by protoporphyrin pigment. However, the function of these spots is contested. Recently, the sexually selected eggshell coloration (SSEC) hypothesis proposed that eggshell color is a sexually selected signal through which a female advertises her quality (and hence the potential quality of her future young) to her male partner, thereby encouraging him to contribute more to breeding attempts. We performed a test of the SSEC hypothesis in a common passerine, the great tit Parus major. We used a double cross-fostering design to determine whether males change their provisioning behavior based on eggshell patterns they observe at the nest. We also tested the assumption that egg patterning reflects female and/or offspring quality. Because birds differ from humans in their color and pattern perception, we used digital photography and models of bird vision to quantify egg patterns objectively. Neither male provisioning nor chick growth was related to the pattern of eggs males observed during incubation. Although heavy females laid paler, less speckled eggs, these eggs did not produce chicks that grew faster. Therefore, we conclude that the SSEC hypothesis is an unlikely explanation for the evolution of egg speckling in great tits. PMID:22815730

  15. Egg speckling patterns do not advertise offspring quality or influence male provisioning in great tits.

    Directory of Open Access Journals (Sweden)

    Mary Caswell Stoddard

    Full Text Available Many passerine birds lay white eggs with reddish brown speckles produced by protoporphyrin pigment. However, the function of these spots is contested. Recently, the sexually selected eggshell coloration (SSEC hypothesis proposed that eggshell color is a sexually selected signal through which a female advertises her quality (and hence the potential quality of her future young to her male partner, thereby encouraging him to contribute more to breeding attempts. We performed a test of the SSEC hypothesis in a common passerine, the great tit Parus major. We used a double cross-fostering design to determine whether males change their provisioning behavior based on eggshell patterns they observe at the nest. We also tested the assumption that egg patterning reflects female and/or offspring quality. Because birds differ from humans in their color and pattern perception, we used digital photography and models of bird vision to quantify egg patterns objectively. Neither male provisioning nor chick growth was related to the pattern of eggs males observed during incubation. Although heavy females laid paler, less speckled eggs, these eggs did not produce chicks that grew faster. Therefore, we conclude that the SSEC hypothesis is an unlikely explanation for the evolution of egg speckling in great tits.

  16. Low-calorie- and calorie-sweetened beverages: diet quality, food intake, and purchase patterns of US household consumers.

    Science.gov (United States)

    Piernas, Carmen; Mendez, Michelle A; Ng, Shu Wen; Gordon-Larsen, Penny; Popkin, Barry M

    2014-03-01

    Few studies have investigated the diet quality of consumers of low-calorie-sweetened (LCS) and calorie-sweetened (CS) beverages. The objective was to examine the dietary quality and adherence to dietary purchasing and consumption patterns of beverage consumers from 2000 to 2010. We analyzed purchases for 140,352 households from the Homescan longitudinal data set 2000-2010 and dietary intake from NHANES 2003-2010 (n = 34,393). We defined mutually exclusive consumer profiles as main exposures: LCS beverages, CS beverages, LCS & CS beverages, and non/low consumers. As main outcomes, we explored dietary quality by using total energy and macronutrients (kcal/d). We performed factor analyses and applied factor scores to derive dietary patterns as secondary outcomes. Using multivariable linear (NHANES) and random-effects (Homescan) models, we investigated the associations between beverage profiles and dietary patterns. We found "prudent" and "breakfast" patterns in Homescan and NHANES, "ready-to-eat meals/fast-food" and "prudent/snacks/LCS desserts" patterns in Homescan, and "protein/potatoes" and "CS desserts/sweeteners" patterns in NHANES. In both data sets, compared with non/low consumers, both CS- and LCS-beverage consumers had a significantly higher total energy from foods, higher energy from total and SFAs, and lower probability of adherence to prudent and breakfast patterns. In Homescan, LCS-beverage consumers had a higher probability of adherence to 2 distinct patterns: a prudent/snacks/LCS dessert pattern and a ready-to-eat meals/fast-food purchasing pattern. Our findings suggest that overall dietary quality is lower in LCS-, CS-, and LCS & CS-beverage consumers relative to non/low consumers. Our study highlights the importance of targeting foods that are linked with sweetened beverages (either LCS or CS) in intervention and policy efforts that aim to improve nutrition in the United States.

  17. From image processing to classification: IV. Classification of electrophoretic patterns by neural networks and statistical methods enable quality assessment of wheat varieties for bread making

    DEFF Research Database (Denmark)

    Jensen, K.; Kesmir, Can; Søndergaard, Ib

    1996-01-01

    The end-use quality of products made from doughs consisting of wheat flour and water is often dependent upon the storage (gluten) proteins of the grain endosperm. Today the electrophoretic patterns of the high molecular weight (HMW) glutenin subunits are used for quality selections in wheat breed...

  18. Age-Related Patterns in Cancer Pain and Its Psychosocial Impact: Investigating the Role of Variability in Physical and Mental Health Quality of Life.

    Science.gov (United States)

    Gauthier, Lynn R; Dworkin, Robert H; Warr, David; Pillai Riddell, Rebecca; Macpherson, Alison K; Rodin, Gary; Zimmermann, Camilla; Lawrence Librach, S; Moore, Malcolm; Shepherd, Frances A; Gagliese, Lucia

    2017-03-03

    Age-related patterns in cancer pain remain equivocal. Most studies ignore heterogeneity across multiple domains of well-being, and the potential role of physical (PH) and mental health (MH) quality of life (QOL) in these age-related patterns is unknown. We investigated the relationships between age and cancer pain intensity, qualities, and interference, and physical and psychosocial adaptation and the interaction between age and PH and MH QOL on pain and adaptation to cancer pain. In this cross-sectional study, 244 patients with advanced cancer and pain completed measures of pain, QOL, physical function, and psychosocial well-being. Pearson's correlations and ANOVAs assessed relationships between age and demographic and clinical factors, pain, and physical and psychosocial measures. Regression models tested the role of age and its interaction with PH and MH QOL on pain and physical and psychosocial adaptation. Older age was associated with a lower likelihood of receiving an opioid prescription, greater likelihood of having comorbidities, and worse functional status. When we did not account for these factors, age was not associated with pain and most adaptation indices. When we did account for these factors and PH QOL, older age was associated with lower non-neuropathic and neuropathic pain and several indices of psychosocial adaptation. Most interestingly, older age was associated with lower non-neuropathic pain among those with high, but not low, MH QOL. This study addresses knowledge gaps about factors underlying age-related patterns in cancer pain. Impaired MH QOL may be a proxy for age-related patterns in cancer pain. This study investigated age-related patterns in the experience of cancer pain and the role of quality of life in resilience and vulnerability to pain and adaptation to pain. Older age is associated with lower non-neuropathic pain among those with high, but not low, mental health quality of life, suggesting that impaired mental health quality of

  19. Easy fabrication of high quality nickel mold for deep polymer microfluidic channels

    International Nuclear Information System (INIS)

    Wong, Ten It; Tan, Christina Yuan Ling; Zhou, Xiaodong; Limantoro, Julian; Fong, Kin Phang; Quan, Chenggen; Sun, Ling Ling

    2016-01-01

    Mass fabrication of disposable microfluidic chips with hot embossing is a key technology for microfluidic chip based biosensors. In this work, we develop a new method of fabricating high quality and highly durable nickel molds for hot embossing polymer chips. The process involves the addition of a thick, patterned layer of negative photoresist AZ-125nxT to a 4″ silicon wafer, followed by nickel electroplating and delamination of the nickel mold. Our investigations found that compared to a pillar mask, a hole mask can minimize the diffraction effect in photolithography of a thick photoresist, reduce the adhesion of the AZ-125nxT to the photomask in photolithography, and facilitate clean development of the photoresist patterns. By optimizing the hot embossing and chip bonding parameters, microfluidic chips with deep channels are achieved. (paper)

  20. Quality inspection of anisotropic scintillating crystals through measurement of interferometric fringe pattern parameters

    CERN Document Server

    Cocozzella, N; Majni, G; Paone, N; Rinaldi, D T

    2001-01-01

    Scintillating crystals are widely used as detectors in radiographic systems, computerized axial tomography devices and in calorimeters employed in high-energy physics. This paper results from a project motivated by the development of the CMS calorimeter at CERN, which will make use of a large number of scintillating crystals. In order to prevent crystals from breaking because of internal residual stress, a quality control system based on optic inspection of interference fringe patterns was developed. The principle of measurement procedures was theoretically modelled, and then a dedicated polariscope was designed and built, in order to observe the crystals under induced stresses or to evaluate the residual internal stresses. The results are innovative and open a new perspective for scintillating crystals quality control: the photoelastic constant normal to the optic axis of the lead tungstate crystals (PbWO sub 4) was measured, and the inspection procedure developed is applicable to mass production, not only t...

  1. Meta-algorithmics patterns for robust, low cost, high quality systems

    CERN Document Server

    Simske, Steven J

    2013-01-01

    The confluence of cloud computing, parallelism and advanced machine intelligence approaches has created a world in which the optimum knowledge system will usually be architected from the combination of two or more knowledge-generating systems. There is a need, then, to provide a reusable, broadly-applicable set of design patterns to empower the intelligent system architect to take advantage of this opportunity. This book explains how to design and build intelligent systems that are optimized for changing system requirements (adaptability), optimized for changing system input (robustness), an

  2. Zerodur polishing process for high surface quality and high efficiency

    International Nuclear Information System (INIS)

    Tesar, A.; Fuchs, B.

    1992-08-01

    Zerodur is a glass-ceramic composite importance in applications where temperature instabilities influence optical and mechanical performance, such as in earthbound and spaceborne telescope mirror substrates. Polished Zerodur surfaces of high quality have been required for laser gyro mirrors. Polished surface quality of substrates affects performance of high reflection coatings. Thus, the interest in improving Zerodur polished surface quality has become more general. Beyond eliminating subsurface damage, high quality surfaces are produced by reducing the amount of hydrated material redeposited on the surface during polishing. With the proper control of polishing parameters, such surfaces exhibit roughnesses of < l Angstrom rms. Zerodur polishing was studied to recommend a high surface quality polishing process which could be easily adapted to standard planetary continuous polishing machines and spindles. This summary contains information on a polishing process developed at LLNL which reproducibly provides high quality polished Zerodur surfaces at very high polishing efficiencies

  3. Drinking Patterns Among Older Couples: Longitudinal Associations With Negative Marital Quality.

    Science.gov (United States)

    Birditt, Kira S; Cranford, James A; Manalel, Jasmine A; Antonucci, Toni C

    2018-04-16

    Research with younger couples indicates that alcohol use has powerful effects on marital quality, but less work has examined the effects of drinking among older couples. This study examined whether dyadic patterns of drinking status among older couples are associated with negative marital quality over time. Married participants (N = 4864) from the Health and Retirement Study reported on alcohol consumption (whether they drink alcohol and average amount consumed per week) and negative marital quality (e.g., criticism and demands) across two waves (Wave 1 2006/2008 and Wave 2 2010/2012). Concordant drinking couples reported decreased negative marital quality over time, and these links were significantly greater among wives. Wives who reported drinking alcohol reported decreased negative marital quality over time when husbands also reported drinking and increased negative marital quality over time when husbands reported not drinking. The present findings stress the importance of considering the drinking status rather than the amount of alcohol consumed of both members of the couple when attempting to understand drinking and marital quality among older couples. These findings are particularly salient given the increased drinking among baby boomers and the importance of marital quality for health among older couples.

  4. A study on family communication pattern and parenting styles with quality of life in adolescent

    International Nuclear Information System (INIS)

    Sanavi, F.S.; Baghbanian, A.; Shovey, M.F.; Moghaddam, A.A

    2013-01-01

    Objective: To investigate the relationship between parenting styles and family communication patterns with adolescent's quality of life. Methods: The cross-sectional study was carried out on 439 randomly selected adolescents in the city of Zahedan, Iran, from January to July 2011. The subjects were asked to complete the KIDSCREEN-52 health-related quality of life questionnaire, while their parents were asked to complete the Diana Brinder's Test to show their parenting styles. SPSS 15 was used to analyse data. Results: Most parents had authoritative parenting style (n=380; 86.6%). Pluralistic (n=170; 38.7%) and consensual (n=152; 34.6%) patterns were the most frequent styles of communication in families. Data suggested a significant relationship between parenting style and some dimensions of quality of life, including physical well-being, psychological well-being, social support and peers, and autonomy (p<0.05). There was also a significant relationship between family communication patterns and parent relation and home life (p<0.001) as well as autonomy (p<0.006). Conclusion: Families play a critical role in increasing adolescents, health-related quality-of-life. Effort should be made to address problems facing parents while raising their children. (author)

  5. Data Auditor: Analyzing Data Quality Using Pattern Tableaux

    Science.gov (United States)

    Srivastava, Divesh

    Monitoring databases maintain configuration and measurement tables about computer systems, such as networks and computing clusters, and serve important business functions, such as troubleshooting customer problems, analyzing equipment failures, planning system upgrades, etc. These databases are prone to many data quality issues: configuration tables may be incorrect due to data entry errors, while measurement tables may be affected by incorrect, missing, duplicate and delayed polls. We describe Data Auditor, a tool for analyzing data quality and exploring data semantics of monitoring databases. Given a user-supplied constraint, such as a boolean predicate expected to be satisfied by every tuple, a functional dependency, or an inclusion dependency, Data Auditor computes "pattern tableaux", which are concise summaries of subsets of the data that satisfy or fail the constraint. We discuss the architecture of Data Auditor, including the supported types of constraints and the tableau generation mechanism. We also show the utility of our approach on an operational network monitoring database.

  6. [Quality management is associated with high quality services in health care].

    Science.gov (United States)

    Nielsen, Tenna Hassert; Riis, Allan; Mainz, Jan; Jensen, Anne-Louise Degn

    2013-12-09

    In these years, quality management has been the focus in order to meet high quality services for the patients in Danish health care. This article provides information on quality management and quality improvement and it evaluates its effectiveness in achieving better organizational structures, processes and results in Danish health-care organizations. Our findings generally support that quality management is associated with high quality services in health care.

  7. Toward a Simple Framework for Understanding the Influence of Litter Quality on Vertical and Horizontal Patterns of Soil Organic Matter Pools

    Science.gov (United States)

    Craig, M.; Phillips, R.

    2016-12-01

    Decades of research have revealed that plant litter quality fundamentally influences soil organic matter (SOM) properties. Yet we lack the predictive frameworks necessary to up-scale our understanding of these dynamics in biodiverse systems. Given that ectomycorrhizal (EM) and arbuscular mycorrhizal (AM) plants are thought to differ in their litter quality, we ask whether this dichotomy represents a framework for understanding litter quality effects on SOM in temperate forests. To do this, we sampled soils from 250 spatially referenced locations within a 25-Ha plot where 28,000 trees had been georeferenced, and analyzed spatial patterns of plant and SOM properties. We then examined the extent to which the dominance of AM- versus EM-trees relates to 1) the quality of litter inputs to forest soils and 2) the horizontal and vertical distribution of SOM fractions. We found that leaf litters produced by EM-associated trees were generally of lower quality, having a lower concentration of soluble compounds and higher C:N. Concomitant with this, we observed higher soil C:N under EM trees. Interestingly, this reflected greater N storage in AM-dominated soils rather than greater C storage in EM-dominated soils. These patterns were driven by the storage of SOM in N-rich fractions in AM-dominated soils. Specifically, trees with high litter quality were associated with greater amounts of deep and mineral-associated SOM; pools that are generally considered stable. Our results support the recent contention that high-quality plant inputs should lead to the formation of stable SOM and suggest that the AM-EM framework may provide a way forward for representing litter quality effects on SOM in earth system models.

  8. The impact of traffic-flow patterns on air quality in urban street canyons

    International Nuclear Information System (INIS)

    Thaker, Prashant; Gokhale, Sharad

    2016-01-01

    We investigated the effect of different urban traffic-flow patterns on pollutant dispersion in different winds in a real asymmetric street canyon. Free-flow traffic causes more turbulence in the canyon facilitating more dispersion and a reduction in pedestrian level concentration. The comparison of with and without a vehicle-induced-turbulence revealed that when winds were perpendicular, the free-flow traffic reduced the concentration by 73% on the windward side with a minor increase of 17% on the leeward side, whereas for parallel winds, it reduced the concentration by 51% and 29%. The congested-flow traffic increased the concentrations on the leeward side by 47% when winds were perpendicular posing a higher risk to health, whereas reduced it by 17–42% for parallel winds. The urban air quality and public health can, therefore, be improved by improving the traffic-flow patterns in street canyons as vehicle-induced turbulence has been shown to contribute significantly to dispersion. - Highlights: • CFD is used to study impact of traffic-flow patterns on urban air quality. • Facilitating free-flow patterns induce more turbulence in street canyons. • Traffic-generated turbulence alters pollutant levels in urban street canyons. - This study investigates the effect of vehicle-induced-turbulence generated during free-flow traffic pattern in reduction of air pollutant concentrations in urban street canyons.

  9. High-speed imaging of blood splatter patterns

    Energy Technology Data Exchange (ETDEWEB)

    McDonald, T.E.; Albright, K.A.; King, N.S.P.; Yates, G.J. (Los Alamos National Lab., NM (United States)); Levine, G.F. (California Dept. of Justice, Sacramento, CA (United States). Bureau of Forensic Services)

    1993-01-01

    The interpretation of blood splatter patterns is an important element in reconstructing the events and circumstances of an accident or crime scene. Unfortunately, the interpretation of patterns and stains formed by blood droplets is not necessarily intuitive and study and analysis are required to arrive at a correct conclusion. A very useful tool in the study of blood splatter patterns is high-speed photography. Scientists at the Los Alamos National Laboratory, Department of Energy (DOE), and Bureau of Forensic Services, State of California, have assembled a high-speed imaging system designed to image blood splatter patterns. The camera employs technology developed by Los Alamos for the underground nuclear testing program and has also been used in a military mine detection program. The camera uses a solid-state CCD sensor operating at approximately 650 frames per second (75 MPixels per second) with a microchannel plate image intensifier that can provide shuttering as short as 5 ns. The images are captured with a laboratory high-speed digitizer and transferred to an IBM compatible PC for display and hard copy output for analysis. The imaging system is described in this paper.

  10. High-speed imaging of blood splatter patterns

    Energy Technology Data Exchange (ETDEWEB)

    McDonald, T.E.; Albright, K.A.; King, N.S.P.; Yates, G.J. [Los Alamos National Lab., NM (United States); Levine, G.F. [California Dept. of Justice, Sacramento, CA (United States). Bureau of Forensic Services

    1993-05-01

    The interpretation of blood splatter patterns is an important element in reconstructing the events and circumstances of an accident or crime scene. Unfortunately, the interpretation of patterns and stains formed by blood droplets is not necessarily intuitive and study and analysis are required to arrive at a correct conclusion. A very useful tool in the study of blood splatter patterns is high-speed photography. Scientists at the Los Alamos National Laboratory, Department of Energy (DOE), and Bureau of Forensic Services, State of California, have assembled a high-speed imaging system designed to image blood splatter patterns. The camera employs technology developed by Los Alamos for the underground nuclear testing program and has also been used in a military mine detection program. The camera uses a solid-state CCD sensor operating at approximately 650 frames per second (75 MPixels per second) with a microchannel plate image intensifier that can provide shuttering as short as 5 ns. The images are captured with a laboratory high-speed digitizer and transferred to an IBM compatible PC for display and hard copy output for analysis. The imaging system is described in this paper.

  11. Pattern recognition in high energy physics

    International Nuclear Information System (INIS)

    Tenner, A.G.

    1980-01-01

    In high energy physics experiments tracks of elementary particles are recorded by different types of equipment. Coordinates of points of these tracks have to be measured for the geometrical reconstruction and the further analysis of the observed events. Pattern recognition methods may facilitate the detection of tracks or whole events and the separation of relevant from non-relevant information. They may also serve for the automation of measurement. Generally, all work is done by digital computation. In a bubble chamber tracks appear as strings of vapour bubbles that can be recorded photographically. Two methods of pattern recognition are discussed. The flying spot digitizer encodes the pattern on the photograph into point coordinates in the memory of a computer. The computer carries out the pattern recognition procedure entirely on the basis of the stored information. Cathode ray instruments scan the photograph by means of a computer steered optical device. Data acquisition from the film is performed in a feedback loop of the computation. In electronic experimental equipment tracks are defined by the spacial distribution of hits of counters (wire counters, scintillation counters, spark chambers). Pattern recognition is generally performed in various stages both by on-line and off-line equipment. Problems in the data handling arise both from the great abundance of data and from the time limits imposed on the on-line computation by high measuring rates. The on-line computation is carried out by hardwired logic, small computers, and to an increasing extent by microprocessors. (Auth.)

  12. Curriculum enactment patterns and associated factors from teachers' perspectives

    Science.gov (United States)

    Son, Ji-Won; Kim, Ok-Kyeong

    2016-12-01

    As part of a larger effort to improve teacher capacity for high-quality mathematics instruction, we investigated the factors that are associated with different enactment patterns at three levels: contextual (e.g., type and quality of textbook), individual (e.g., teacher knowledge), and teachers' opportunity-to-learn (e.g., professional development experiences). Analysis of 183 teachers' self-reports on their practices revealed three notable findings. First, the factors at the three levels were all found to be significantly related to the different patterns of enacted curriculum. However, the use of quality textbooks and the alignment of teachers' views and instructional goals with curriculum goals were found to be the two factors that are most strongly associated with the enactment pattern of high-level problems and high-level teacher questions in instruction. Furthermore, teachers with the enactment pattern of increasing lower cognitive demand of problems into higher ones tended to rate their curriculum knowledge higher than teachers with the enactment pattern of using low-level problems and teacher questions in their teaching. In particular, deviation from and dissatisfaction with their assigned low-quality textbooks were found to be critical factors that are associated with the enactment pattern of increasing lower cognitive demands of problems in instruction.

  13. A high-resolution stochastic model of domestic activity patterns and electricity demand

    International Nuclear Information System (INIS)

    Widen, Joakim; Waeckelgard, Ewa

    2010-01-01

    Realistic time-resolved data on occupant behaviour, presence and energy use are important inputs to various types of simulations, including performance of small-scale energy systems and buildings' indoor climate, use of lighting and energy demand. This paper presents a modelling framework for stochastic generation of high-resolution series of such data. The model generates both synthetic activity sequences of individual household members, including occupancy states, and domestic electricity demand based on these patterns. The activity-generating model, based on non-homogeneous Markov chains that are tuned to an extensive empirical time-use data set, creates a realistic spread of activities over time, down to a 1-min resolution. A detailed validation against measurements shows that modelled power demand data for individual households as well as aggregate demand for an arbitrary number of households are highly realistic in terms of end-use composition, annual and diurnal variations, diversity between households, short time-scale fluctuations and load coincidence. An important aim with the model development has been to maintain a sound balance between complexity and output quality. Although the model yields a high-quality output, the proposed model structure is uncomplicated in comparison to other available domestic load models.

  14. Water quality and herbivory interactively drive coral-reef recovery patterns in American Samoa.

    Directory of Open Access Journals (Sweden)

    Peter Houk

    Full Text Available BACKGROUND: Compared with a wealth of information regarding coral-reef recovery patterns following major disturbances, less insight exists to explain the cause(s of spatial variation in the recovery process. METHODOLOGY/PRINCIPAL FINDINGS: This study quantifies the influence of herbivory and water quality upon coral reef assemblages through space and time in Tutuila, American Samoa, a Pacific high island. Widespread declines in dominant corals (Acropora and Montipora resulted from cyclone Heta at the end of 2003, shortly after the study began. Four sites that initially had similar coral reef assemblages but differential temporal dynamics four years following the disturbance event were classified by standardized measures of 'recovery status', defined by rates of change in ecological measures that are known to be sensitive to localized stressors. Status was best predicted, interactively, by water quality and herbivory. Expanding upon temporal trends, this study examined if similar dependencies existed through space; building multiple regression models to identify linkages between similar status measures and local stressors for 17 localities around Tutuila. The results highlighted consistent, interactive interdependencies for coral reef assemblages residing upon two unique geological reef types. Finally, the predictive regression models produced at the island scale were graphically interpreted with respect to hypothesized site-specific recovery thresholds. CONCLUSIONS/SIGNIFICANCE: Cumulatively, our study purports that moving away from describing relatively well-known patterns behind recovery, and focusing upon understanding causes, improves our foundation to predict future ecological dynamics, and thus improves coral reef management.

  15. Low-calorie- and calorie-sweetened beverages: diet quality, food intake, and purchase patterns of US household consumers123

    Science.gov (United States)

    Piernas, Carmen; Mendez, Michelle A; Ng, Shu Wen; Gordon-Larsen, Penny; Popkin, Barry M

    2014-01-01

    Background: Few studies have investigated the diet quality of consumers of low-calorie-sweetened (LCS) and calorie-sweetened (CS) beverages. Objective: The objective was to examine the dietary quality and adherence to dietary purchasing and consumption patterns of beverage consumers from 2000 to 2010. Design: We analyzed purchases for 140,352 households from the Homescan longitudinal data set 2000–2010 and dietary intake from NHANES 2003–2010 (n = 34,393). We defined mutually exclusive consumer profiles as main exposures: LCS beverages, CS beverages, LCS & CS beverages, and non/low consumers. As main outcomes, we explored dietary quality by using total energy and macronutrients (kcal/d). We performed factor analyses and applied factor scores to derive dietary patterns as secondary outcomes. Using multivariable linear (NHANES) and random-effects (Homescan) models, we investigated the associations between beverage profiles and dietary patterns. Results: We found “prudent” and “breakfast” patterns in Homescan and NHANES, “ready-to-eat meals/fast-food” and “prudent/snacks/LCS desserts” patterns in Homescan, and “protein/potatoes” and “CS desserts/sweeteners” patterns in NHANES. In both data sets, compared with non/low consumers, both CS- and LCS-beverage consumers had a significantly higher total energy from foods, higher energy from total and SFAs, and lower probability of adherence to prudent and breakfast patterns. In Homescan, LCS-beverage consumers had a higher probability of adherence to 2 distinct patterns: a prudent/snacks/LCS dessert pattern and a ready-to-eat meals/fast-food purchasing pattern. Conclusions: Our findings suggest that overall dietary quality is lower in LCS-, CS-, and LCS & CS–beverage consumers relative to non/low consumers. Our study highlights the importance of targeting foods that are linked with sweetened beverages (either LCS or CS) in intervention and policy efforts that aim to improve nutrition in the

  16. Safe and high quality food production using low quality waters and improved irrigation systems and management

    DEFF Research Database (Denmark)

    Plauborg, Finn; Andersen, Mathias Neumann; Liu, Fulai

    2010-01-01

    uneven irrigation patterns can increase the water use efficiency as well as the quality of vegetable crops. Furthermore, recent innovations in the water treatment and irrigation industry have shown potential for the use of low quality water resources, such as reclaimed water or surface water in peri...

  17. Family Food Preparation and Its Effects on Adolescent Dietary Quality and Eating Patterns.

    Science.gov (United States)

    Berge, Jerica M; MacLehose, Richard F; Larson, Nicole; Laska, Melissa; Neumark-Sztainer, Dianne

    2016-11-01

    The purpose of the study was to describe parent and adolescent involvement in food preparation for the family and to examine whether adolescents' food preparation involvement was related to their dietary quality (e.g., fruit and vegetable intake, sugar-sweetened beverage consumption, and various common nutrients) and eating patterns (e.g., frequency of breakfast, family meals, fast food intake). Data from two linked population-based studies, Eating and Activity in Teens 2010 and Families and Eating and Activity among Teens were used in cross-sectional analyses. Mothers (n = 1,875), stepmothers (n = 18), fathers (n = 977), stepfathers (n = 105), and adolescents (n = 2,108) from socioeconomically and racially/ethnically diverse households participated in the study. Adolescents completed food frequency questionnaires and surveys in school. Parents individually completed surveys by mail or phone. Linear regression was used to estimate differences in adolescent dietary quality and eating patterns between those who do and do not engage in meal preparation. Parent and adolescent report of "usually preparing food for the family" was related to several sociodemographic characteristics, including race/ethnicity (minority populations), parent education (college or higher), parent employment status (part time or stay-at-home caregiver), household size (≤3 children), and adolescent gender (female). Adolescent involvement in food preparation for the family was significantly associated with several markers of better dietary quality and better eating patterns. In contrast, parent involvement in food preparation for the family was unrelated to adolescent dietary intake. Results suggest that involving adolescents in food preparation for the family is related to better adolescent dietary quality and eating patterns. Public health interventions and health care providers may want to encourage adolescents to help with food preparation for the family. Additionally, adolescents

  18. Multi-scale analysis of relationship between landscape pattern and urban river water quality in different seasons.

    Science.gov (United States)

    Xiao, Rui; Wang, Guofeng; Zhang, Qianwen; Zhang, Zhonghao

    2016-05-05

    Water quality is highly dependent on the landscape characteristics. In this study, we investigated the relationships between water quality and landscape pattern (composition and configuration) in Huzhou City, China. The water quality variables, including pH, dissolved oxygen (DO), chemical oxygen demand (CODMn), Biochemical Oxygen Demand (BOD), NH3-N, petroleum, dissolved total phosphorus (DTP), and total nitrogen (TN) in low water, normal water and flood periods were identified by investigating 34 sampling sites in Huzhou City during the period from 2001 to 2007. Landscape composition and landscape configuration metrics were calculated for different scales. It was found that scales and seasons both play important role when analyzing the relationships between landscape characteristics of different land use types. The results implied that some water quality parameters such as CODMn, petroleum are more polluted in flood period than the other two seasons at different scales, while DTP and TN are more polluted in low water period. Influences of different landscape metrics on water quality should operate at different spatial scales. The results shown in this paper will effectively provide scientific basis for the policy making in sustainable development of water environment.

  19. Dietary Patterns and Their Associations with the Diet Quality Index-International (DQI-I) in Korean Women with Gestational Diabetes Mellitus.

    Science.gov (United States)

    Shin, Moon-Kyung; Kim, Yoo-Sun; Kim, Jung-Hyun; Kim, Sung-Hoon; Kim, Yuri

    2015-10-01

    The aim of this study was to examine dietary pattern, nutritional intake, and diet quality of Korean pregnant women with gestational diabetes mellitus (GDM). Between October 2008 and May 2012, 166 pregnant women diagnosed with GDM completed a questionnaire and dietary intake was assessed using a 3-day food record. Blood pressure, fasting plasma glucose, and glycated hemoglobin (HbA1c) concentrations were measured and oral glucose tolerance test (OGTT) was performed. Two major dietary patterns ("carbohydrate and vegetable" and "western" patterns) were identified through factor analysis. Dietary pattern scores for each dietary pattern were categorized into tertiles. The dietary quality index-international (DQI-I) was used to measure overall diet quality. Subjects with higher carbohydrate and vegetable pattern scores reported less physical activity (p pattern scores were associated with higher sodium intakes (p = 0.02), but lower intakes of fat (p = 0.002) and other micronutrients. On the other hand, higher western pattern scores were associated with higher fat intake (p = 0.0001), but lower intakes of sodium (p = 0.01) and other micronutrients. Higher scores for both dietary patterns were associated with lower scores in the moderation category of the DQI-I (p dietary pattern.

  20. Development of dietary pattern evaluation tool for adults and correlation with Dietary Quality Index

    OpenAIRE

    Lee, Yeo Do; Kim, Kyung Won; Choi, Kyung-Suk; Kim, Misung; Cho, Yeo Jin; Sohn, Cheongmin

    2016-01-01

    BACKGROUND/OBJECTIVES As the prevalence of chronic diseases has risen, the need for straightforward diagnostic tools for monitoring nutrition status to improve nutrition counseling and disease prevention has likewise increased. This study developed an easily usable dietary behavior pattern diagnosis checklist and investigated its correlation with dietary quality index. SUBJECTS/METHODS A draft dietary pattern evaluation tool was generated by analyzing previous studies. The draft questionnaire...

  1. GHG reduction potential of changes in consumption patterns and higher quality levels: Evidence from Swiss household consumption survey

    Energy Technology Data Exchange (ETDEWEB)

    Girod, Bastien, E-mail: bastien.girod@env.ethz.c [ETH Zurich, Institute for Environmental Decisions, Natural and Social Science Interface, Universitaetstrasse 22, CHN J72.1, 8092 Zurich (Switzerland); Haan, Peter de [ETH Zurich, Institute for Environmental Decisions, Natural and Social Science Interface, Universitaetstrasse 22, CHN J72.1, 8092 Zurich (Switzerland)

    2009-12-15

    An effective consumer-oriented climate policy requires knowing the GHG reduction potential of sustainable consumption. The aim of this study is to draw lessons from differences in consumption between households with high and low GHG emissions. We evaluate a survey of 14,500 households and use a method that allows measuring changes in price level of consumption. Comparing the 10% of households with the highest GHG emissions per capita with the lowest 10% - controlling for differences in expenditure level and household structure - we find a range 5-17 tons of CO{sub 2}-equivalent per capita and year. The observed differences stem mainly from heating, electricity use, car use, and travel by aircraft. Consumption patterns with low GHG emissions are characterized by less spending on mobility, but more on leisure and quality oriented consumption (leading to higher prices per unit). Further characteristics are: a higher share of organic food, low meat consumption and fewer detached single family houses. Our findings imply that a significant reduction in GHG emissions would be possible by adopting real-world consumption patterns observable in society. The twin challenge is to shift consumption towards more climate friendly patterns, and to prevent any trend towards high emitting consumption patterns.

  2. GHG reduction potential of changes in consumption patterns and higher quality levels. Evidence from Swiss household consumption survey

    Energy Technology Data Exchange (ETDEWEB)

    Girod, Bastien; De Haan, Peter [ETH Zurich, Institute for Environmental Decisions, Natural and Social Science Interface, Universitaetstrasse 22, CHN J72.1, 8092 Zurich (Switzerland)

    2009-12-15

    An effective consumer-oriented climate policy requires knowing the GHG reduction potential of sustainable consumption. The aim of this study is to draw lessons from differences in consumption between households with high and low GHG emissions. We evaluate a survey of 14,500 households and use a method that allows measuring changes in price level of consumption. Comparing the 10% of households with the highest GHG emissions per capita with the lowest 10% - controlling for differences in expenditure level and household structure - we find a range 5-17 tons of CO{sub 2}-equivalent per capita and year. The observed differences stem mainly from heating, electricity use, car use, and travel by aircraft. Consumption patterns with low GHG emissions are characterized by less spending on mobility, but more on leisure and quality oriented consumption (leading to higher prices per unit). Further characteristics are: a higher share of organic food, low meat consumption and fewer detached single family houses. Our findings imply that a significant reduction in GHG emissions would be possible by adopting real-world consumption patterns observable in society. The twin challenge is to shift consumption towards more climate friendly patterns, and to prevent any trend towards high emitting consumption patterns. (author)

  3. GHG reduction potential of changes in consumption patterns and higher quality levels: Evidence from Swiss household consumption survey

    International Nuclear Information System (INIS)

    Girod, Bastien; Haan, Peter de

    2009-01-01

    An effective consumer-oriented climate policy requires knowing the GHG reduction potential of sustainable consumption. The aim of this study is to draw lessons from differences in consumption between households with high and low GHG emissions. We evaluate a survey of 14,500 households and use a method that allows measuring changes in price level of consumption. Comparing the 10% of households with the highest GHG emissions per capita with the lowest 10% - controlling for differences in expenditure level and household structure - we find a range 5-17 tons of CO 2 -equivalent per capita and year. The observed differences stem mainly from heating, electricity use, car use, and travel by aircraft. Consumption patterns with low GHG emissions are characterized by less spending on mobility, but more on leisure and quality oriented consumption (leading to higher prices per unit). Further characteristics are: a higher share of organic food, low meat consumption and fewer detached single family houses. Our findings imply that a significant reduction in GHG emissions would be possible by adopting real-world consumption patterns observable in society. The twin challenge is to shift consumption towards more climate friendly patterns, and to prevent any trend towards high emitting consumption patterns.

  4. Strong adherence to a healthy dietary pattern is associated with better semen quality, especially in men with poor semen quality

    NARCIS (Netherlands)

    Oostingh, Elsje C.; Steegers-Theunissen, Régine P.M.; Vries, de Jeanne H.M.; Laven, Joop S.E.; Koster, Maria P.H.

    2017-01-01

    Objective: To study associations between periconceptional dietary patterns and semen quality parameters. Design: Prospective periconception cohort study. Setting: Tertiary hospital. Patient(s): One hundred and twenty-nine male partners of pregnant women who participated in the Rotterdam

  5. High performance embedded system for real-time pattern matching

    Energy Technology Data Exchange (ETDEWEB)

    Sotiropoulou, C.-L., E-mail: c.sotiropoulou@cern.ch [University of Pisa, Largo B. Pontecorvo 3, 56127 Pisa (Italy); INFN-Pisa Section, Largo B. Pontecorvo 3, 56127 Pisa (Italy); Luciano, P. [University of Cassino and Southern Lazio, Gaetano di Biasio 43, Cassino 03043 (Italy); INFN-Pisa Section, Largo B. Pontecorvo 3, 56127 Pisa (Italy); Gkaitatzis, S. [Aristotle University of Thessaloniki, 54124 Thessaloniki (Greece); Citraro, S. [University of Pisa, Largo B. Pontecorvo 3, 56127 Pisa (Italy); INFN-Pisa Section, Largo B. Pontecorvo 3, 56127 Pisa (Italy); Giannetti, P. [INFN-Pisa Section, Largo B. Pontecorvo 3, 56127 Pisa (Italy); Dell' Orso, M. [University of Pisa, Largo B. Pontecorvo 3, 56127 Pisa (Italy); INFN-Pisa Section, Largo B. Pontecorvo 3, 56127 Pisa (Italy)

    2017-02-11

    In this paper we present an innovative and high performance embedded system for real-time pattern matching. This system is based on the evolution of hardware and algorithms developed for the field of High Energy Physics and more specifically for the execution of extremely fast pattern matching for tracking of particles produced by proton–proton collisions in hadron collider experiments. A miniaturized version of this complex system is being developed for pattern matching in generic image processing applications. The system works as a contour identifier able to extract the salient features of an image. It is based on the principles of cognitive image processing, which means that it executes fast pattern matching and data reduction mimicking the operation of the human brain. The pattern matching can be executed by a custom designed Associative Memory chip. The reference patterns are chosen by a complex training algorithm implemented on an FPGA device. Post processing algorithms (e.g. pixel clustering) are also implemented on the FPGA. The pattern matching can be executed on a 2D or 3D space, on black and white or grayscale images, depending on the application and thus increasing exponentially the processing requirements of the system. We present the firmware implementation of the training and pattern matching algorithm, performance and results on a latest generation Xilinx Kintex Ultrascale FPGA device. - Highlights: • A high performance embedded system for real-time pattern matching is proposed. • It is based on a system developed for High Energy Physics experiment triggers. • It mimics the operation of the human brain (cognitive image processing). • The process can be executed on 2D and 3D, black and white or grayscale images. • The implementation uses FPGAs and custom designed associative memory (AM) chips.

  6. High performance embedded system for real-time pattern matching

    International Nuclear Information System (INIS)

    Sotiropoulou, C.-L.; Luciano, P.; Gkaitatzis, S.; Citraro, S.; Giannetti, P.; Dell'Orso, M.

    2017-01-01

    In this paper we present an innovative and high performance embedded system for real-time pattern matching. This system is based on the evolution of hardware and algorithms developed for the field of High Energy Physics and more specifically for the execution of extremely fast pattern matching for tracking of particles produced by proton–proton collisions in hadron collider experiments. A miniaturized version of this complex system is being developed for pattern matching in generic image processing applications. The system works as a contour identifier able to extract the salient features of an image. It is based on the principles of cognitive image processing, which means that it executes fast pattern matching and data reduction mimicking the operation of the human brain. The pattern matching can be executed by a custom designed Associative Memory chip. The reference patterns are chosen by a complex training algorithm implemented on an FPGA device. Post processing algorithms (e.g. pixel clustering) are also implemented on the FPGA. The pattern matching can be executed on a 2D or 3D space, on black and white or grayscale images, depending on the application and thus increasing exponentially the processing requirements of the system. We present the firmware implementation of the training and pattern matching algorithm, performance and results on a latest generation Xilinx Kintex Ultrascale FPGA device. - Highlights: • A high performance embedded system for real-time pattern matching is proposed. • It is based on a system developed for High Energy Physics experiment triggers. • It mimics the operation of the human brain (cognitive image processing). • The process can be executed on 2D and 3D, black and white or grayscale images. • The implementation uses FPGAs and custom designed associative memory (AM) chips.

  7. Differential DNA Methylation Patterns Are Related to Phellogen Origin and Quality of Quercus suber Cork.

    Science.gov (United States)

    Inácio, Vera; Barros, Pedro M; Costa, Augusta; Roussado, Cristóvão; Gonçalves, Elsa; Costa, Rita; Graça, José; Oliveira, M Margarida; Morais-Cecílio, Leonor

    2017-01-01

    DNA methylation is thought to influence Quercus suber cork quality, which is the main constraint for its economic valorisation. However, a deep knowledge of the cytosine methylation patterns disclosing the epigenetic variability of trees with different cork quality types is totally missing. This study investigates the hypothesis that variations in DNA methylation contribute to differences in cork cellular characteristics directly related to original or traumatic phellogen activity. We used MSAPs (Methylation Sensitive Amplified Polymorphism) to assess DNA methylation patterns of cork and leaf tissues of Q. suber adult trees growing in three cork oak stands. The relationship between the detected polymorphisms and the diversity of cork quality traits was explored by a marker-trait analysis focusing on the most relevant quality characteristics. Populations differed widely in cork quality, but only slightly in degree of epigenetic differentiation. Four MSAP markers (1.3% of the total) were significantly associated with the most noteworthy quality traits: wood inclusions (nails) and porosity. This evidence supports the potential role of cytosine methylation in the modulation of differential phellogen activity either involved in localized cell death or in pore production, resulting in different cork qualities. Although, the underlying basis of the methylation polymorphism of loci affecting cork quality traits remain unclear, the disclosure of markers statistically associated with cork quality strengthens the potential role of DNA methylation in the regulation of these traits, namely at the phellogen level.

  8. Biofouling patterns in spacer filled channels: High resolution imaging for characterization of heterogeneous biofilms

    KAUST Repository

    Staal, Marc

    2017-08-15

    Biofilms develop in heterogeneous patterns at a µm scale up to a cm scale, and patterns become more pronounced when biofilms develop under complex hydrodynamic flow regimes. Spatially heterogeneous biofilms are especially known in spiral wound reverse osmosis (RO) and nanofiltration (NF) membrane filtration systems used for desalination and wastewater reuse to produce high quality (drinking) water. These spiral wound membrane modules contain mesh-like spacer structures used to create an intermembrane space and improve water mixing. Spacers create inhomogeneous water flow patterns resulting in zones favouring biofilm growth, possibly leading to biofouling thus hampering water production. Oxygen sensing planar optodes were used to visualize variations in oxygen decrease rates (ODR). ODR is an indication of biofilm activity. In this study, ODR images of multiple repetitive spacer areas in a membrane fouling simulator were averaged to produce high resolution, low noise ODR images. Averaging 40 individual spacer areas improved the ODR distribution image significantly and allowed comparison of biofilm patterning over a spacer structure at different positions in an RO filter. This method clearly showed that most active biofilm accumulated on and in direct vicinity of the spacer. The averaging method was also used to calculate the deviation of ODR patterning from individual spacer areas to the average ODR pattern, proposing a new approach to determine biofilm spatial heterogeneity. This study showed that the averaging method can be applied and that the improved, averaged ODR images can be used as an analytical, in-situ, non-destructive method to assess and quantify the effect of membrane installation operational parameters or different spacer geometries on biofilm development in spiral wound membrane systems characterized by complex hydrodynamic conditions.

  9. Nutrition Facts Panel use is associated with diet quality and dietary patterns among Latinos with type 2 diabetes.

    Science.gov (United States)

    Kollannoor-Samuel, Grace; Segura-Pérez, Sofia; Shebl, Fatma M; Hawley, Nicola L; Damio, Grace; Chhabra, Jyoti; Vega-López, Sonia; Fernandez, Maria Luz; Pérez-Escamilla, Rafael

    2017-11-01

    The study aims were to (i) identify determinants of Nutrition Facts Panel (NFP) use and (ii) describe the association between NFP use and dietary intake among Latinos with type 2 diabetes. Baseline cross-sectional data from a clinical trial were used to assess the association between NFP use and dietary intake. Diet was measured using two methods: (i) a diet quality score (the Healthy Eating Index-2010) derived from a single 24 h recall and (ii) dietary pattern (exploratory factor analyses) from an FFQ. Multivariable logistic and non-parametric quantile regressions were conducted, as appropriate. Settings Hartford County, Connecticut, USA. Latino adults (n 203), ≥21 years of age, with diagnosed type 2 diabetes, glycosylated Hb≥7 %, and without medical conditions limiting physical activity. Participants' education level, diabetes-related knowledge and English speaking were positively associated with NFP use. At the higher percentiles of diet quality score, NFP use was significantly associated with higher diet quality. Similarly, NFP users were more likely to consume a 'healthy' dietary pattern (P=0·003) and less likely to consume a 'fried snack' pattern (P=0·048) compared with NFP non-users. The association between reported NFP use and diet quality was positive and significantly stronger among participants who reported consuming a healthier diet. While NFP use was associated with a healthier dietary pattern, not using NFP was associated with a less-healthy, fried snack pattern. Longitudinal studies are needed to understand whether improving NFP use could be an effective intervention to improve diet quality among Latinos with type 2 diabetes.

  10. High Performance Embedded System for Real-Time Pattern Matching

    CERN Document Server

    Sotiropoulou, Calliope Louisa; The ATLAS collaboration; Gkaitatzis, Stamatios; Citraro, Saverio; Giannetti, Paola; Dell'Orso, Mauro

    2016-01-01

    In this paper we present an innovative and high performance embedded system for real-time pattern matching. This system is based on the evolution of hardware and algorithms developed for the field of High Energy Physics (HEP) and more specifically for the execution of extremely fast pattern matching for tracking of particles produced by proton-proton collisions in hadron collider experiments. A miniaturised version of this complex system is being developed for pattern matching in generic image processing applications. The system works as a contour identifier able to extract the salient features of an image. It is based on the principles of cognitive image processing, which means that it executes fast pattern matching and data reduction mimicking the operation of the human brain. The pattern matching can be executed by a custom designed Associative Memory (AM) chip. The reference patterns are chosen by a complex training algorithm implemented on an FPGA device. Post processing algorithms (e.g. pixel clustering...

  11. Improving image-quality of interference fringes of out-of-plane vibration using temporal speckle pattern interferometry and standard deviation for piezoelectric plates.

    Science.gov (United States)

    Chien-Ching Ma; Ching-Yuan Chang

    2013-07-01

    Interferometry provides a high degree of accuracy in the measurement of sub-micrometer deformations; however, the noise associated with experimental measurement undermines the integrity of interference fringes. This study proposes the use of standard deviation in the temporal domain to improve the image quality of patterns obtained from temporal speckle pattern interferometry. The proposed method combines the advantages of both mean and subtractive methods to remove background noise and ambient disturbance simultaneously, resulting in high-resolution images of excellent quality. The out-of-plane vibration of a thin piezoelectric plate is the main focus of this study, providing information useful to the development of energy harvesters. First, ten resonant states were measured using the proposed method, and both mode shape and resonant frequency were investigated. We then rebuilt the phase distribution of the first resonant mode based on the clear interference patterns obtained using the proposed method. This revealed instantaneous deformations in the dynamic characteristics of the resonant state. The proposed method also provides a frequency-sweeping function, facilitating its practical application in the precise measurement of resonant frequency. In addition, the mode shapes and resonant frequencies obtained using the proposed method were recorded and compared with results obtained using finite element method and laser Doppler vibrometery, which demonstrated close agreement.

  12. Spatial patterns of water quality in Xingu River Basin (Amazonia prior to the Belo Monte dam impoundment

    Directory of Open Access Journals (Sweden)

    JL. Rodrigues-Filho

    Full Text Available Abstract The Xingu River, one of the most important of the Amazon Basin, is characterized by clear and transparent waters that drain a 509.685 km2 watershed with distinct hydrological and ecological conditions and anthropogenic pressures along its course. As in other basins of the Amazon system, studies in the Xingu are scarce. Furthermore, the eminent construction of the Belo Monte for hydropower production, which will alter the environmental conditions in the basin in its lower middle portion, denotes high importance of studies that generate relevant information that may subsidize a more balanced and equitable development in the Amazon region. Thus, the aim of this study was to analyze the water quality in the Xingu River and its tributaries focusing on spatial patterns by the use of multivariate statistical techniques, identifying which water quality parameters were more important for the environmental changes in the watershed. Data sampling were carried out during two complete hydrological cycles in twenty-five sampling stations. The data of twenty seven variables were analyzed by Spearman's correlation coefficients, cluster analysis (CA, and principal component analysis (PCA. The results showed a high auto-correlation between variables (> 0.7. These variables were removed from multivariate analyzes because they provided redundant information about the environment. The CA resulted in the formation of six clusters, which were clearly observed in the PCA and were characterized by different water quality. The statistical results allowed to identify a high spatial variation in the water quality, which were related to specific features of the environment, different uses, influences of anthropogenic activities and geochemical characteristics of the drained basins. It was also demonstrated that most of the sampling stations in the Xingu River basin showed good water quality, due to the absence of local impacts and high power of depuration of the

  13. Spatial patterns of water quality in Xingu River Basin (Amazonia) prior to the Belo Monte dam impoundment.

    Science.gov (United States)

    Rodrigues-Filho, J L; Abe, D S; Gatti-Junior, P; Medeiros, G R; Degani, R M; Blanco, F P; Faria, C R L; Campanelli, L; Soares, F S; Sidagis-Galli, C V; Teixeira-Silva, V; Tundisi, J E M; Matsmura-Tundisi, T; Tundisi, J G

    2015-08-01

    The Xingu River, one of the most important of the Amazon Basin, is characterized by clear and transparent waters that drain a 509.685 km2 watershed with distinct hydrological and ecological conditions and anthropogenic pressures along its course. As in other basins of the Amazon system, studies in the Xingu are scarce. Furthermore, the eminent construction of the Belo Monte for hydropower production, which will alter the environmental conditions in the basin in its lower middle portion, denotes high importance of studies that generate relevant information that may subsidize a more balanced and equitable development in the Amazon region. Thus, the aim of this study was to analyze the water quality in the Xingu River and its tributaries focusing on spatial patterns by the use of multivariate statistical techniques, identifying which water quality parameters were more important for the environmental changes in the watershed. Data sampling were carried out during two complete hydrological cycles in twenty-five sampling stations. The data of twenty seven variables were analyzed by Spearman's correlation coefficients, cluster analysis (CA), and principal component analysis (PCA). The results showed a high auto-correlation between variables (> 0.7). These variables were removed from multivariate analyzes because they provided redundant information about the environment. The CA resulted in the formation of six clusters, which were clearly observed in the PCA and were characterized by different water quality. The statistical results allowed to identify a high spatial variation in the water quality, which were related to specific features of the environment, different uses, influences of anthropogenic activities and geochemical characteristics of the drained basins. It was also demonstrated that most of the sampling stations in the Xingu River basin showed good water quality, due to the absence of local impacts and high power of depuration of the river itself.

  14. Developing Visual Editors for High-Resolution Haptic Patterns

    DEFF Research Database (Denmark)

    Cuartielles, David; Göransson, Andreas; Olsson, Tony

    2012-01-01

    In this article we give an overview of our iterative work in developing visual editors for creating high resolution haptic patterns to be used in wearable, haptic feedback devices. During the past four years we have found the need to address the question of how to represent, construct and edit high...... resolution haptic patterns so that they translate naturally to the user’s haptic experience. To solve this question we have developed and tested several visual editors...

  15. A study on family communication pattern and parenting styles with quality of life in adolescent.

    Science.gov (United States)

    Sanavi, Fariba Shahhraki; Baghbanian, Abdolvahab; Shovey, Mehdi Faraji; Ansari-Moghaddam, Alireza

    2013-11-01

    To investigate the relationship between parenting styles and family communication patterns with adolescent's quality of life. The cross-sectional study was carried out on 439 randomly selected adolescents in the city of Zahedan, Iran, from January to July 2011.The subjects were asked to complete the KIDSCREEN-52 health-related quality of life questionnaire, while their parents were asked to complete the Diana Brinder's Test to show their parenting styles. SPSS 15 was used to analyse data. Most parents had 'authoritative' parenting style (n = 380; 86.6%). Pluralistic (n = 170; 38.7%) and consensual (n = 152; 34.6%) patterns were the most frequent styles of communication in families. Data suggested a significant relationship between parenting style and some dimensions of quality of life, including physical well-being, psychological well-being, social support and peers, and autonomy (p parent relation and home life (p parents while raising their children.

  16. Fringe pattern denoising using coherence-enhancing diffusion.

    Science.gov (United States)

    Wang, Haixia; Kemao, Qian; Gao, Wenjing; Lin, Feng; Seah, Hock Soon

    2009-04-15

    Electronic speckle pattern interferometry is one of the methods measuring the displacement on object surfaces in which fringe patterns need to be evaluated. Noise is one of the key problems affecting further processing and reducing measurement quality. We propose an application of coherence-enhancing diffusion to fringe-pattern denoising. It smoothes a fringe pattern along directions both parallel and perpendicular to fringe orientation with suitable diffusion speeds to more effectively reduce noise and improve fringe-pattern quality. It is a generalized work of Tang's et al.'s [Opt. Lett.33, 2179 (2008)] model that only smoothes a fringe pattern along fringe orientation. Since our model diffuses a fringe pattern with an additional direction, it is able to denoise low-density fringes as well as improve denoising effectiveness for high-density fringes. Theoretical analysis as well as simulation and experimental verifications are addressed.

  17. Effect of Gamma Radiation and Electron Beam on Microbiological Quality and Protein Patterns of 4 Selected Beans

    International Nuclear Information System (INIS)

    Chookaew, S.; Eamsir, J.; Pewlong, W.; Sajjabut, S.

    2014-01-01

    The aim of the present study was to evaluate the effect of gamma ray and electron beam on microbiological quality and protein pattern of four selected beans: mung beans, soy beans, peanuts and black beans. All beans samples were exposed to irradiation at doses of 0, 0.5, 1, and 2 kGy before evaluated for their microbiological quality using AOAC method and protein analysis by gel electrophoresis. Results showed that the amount of bacteria, yeast and mold of irradiated mung beans and peanuts were reduced, whereas these microbiological quality values remained relatively the same for irradiated soy beans and black beans compared to non-irradiated samples. In terms of protein analysis, the protein patterns of the irradiated beans were of the same quality as the non-irradiated samples. To further tested the effect of irradiation on the bean's protein at higher doses, all four selected beans were exposed to gamma ray at 10, 50, 100, 150 and 200 kGy. We found that the protein patterns of mung beans, peanuts and black beans were altered at doses above 50 kGy.

  18. Nanometer-scale patterning of high-Tc superconductors for Josephson junction-based digital circuits

    International Nuclear Information System (INIS)

    Wendt, J.R.; Plut, T.A.; Corless, R.F.; Martens, J.S.; Berkowitz, S.; Char, K.; Johansson, M.; Hou, S.Y.; Phillips, J.M.

    1994-01-01

    A straightforward method for nanometer-scale patterning of high-T c superconductor thin films is discussed. The technique combines direct-write electron beam lithography with well-controlled aqueous etches and is applied to the fabrication of Josephson junction nanobridges in high-quality, epitaxial thin-film YBa 2 Cu 3 O 7 . We present the results of our studies of the dimensions, yield, uniformity, and mechanism of the junctions along with the performance of a representative digital circuit based on these junctions. Direct current junction parameter statistics measured at 77 K show critical currents of 27.5 μA±13% for a sample set of 220 junctions. The Josephson behavior of the nanobridge is believed to arise from the aggregation of oxygen vacancies in the nanometer-scale bridge

  19. High-quality and small-capacity e-learning video featuring lecturer-superimposing PC screen images

    Science.gov (United States)

    Nomura, Yoshihiko; Murakami, Michinobu; Sakamoto, Ryota; Sugiura, Tokuhiro; Matsui, Hirokazu; Kato, Norihiko

    2006-10-01

    Information processing and communication technology are progressing quickly, and are prevailing throughout various technological fields. Therefore, the development of such technology should respond to the needs for improvement of quality in the e-learning education system. The authors propose a new video-image compression processing system that ingeniously employs the features of the lecturing scene. While dynamic lecturing scene is shot by a digital video camera, screen images are electronically stored by a PC screen image capturing software in relatively long period at a practical class. Then, a lecturer and a lecture stick are extracted from the digital video images by pattern recognition techniques, and the extracted images are superimposed on the appropriate PC screen images by off-line processing. Thus, we have succeeded to create a high-quality and small-capacity (HQ/SC) video-on-demand educational content featuring the advantages: the high quality of image sharpness, the small electronic file capacity, and the realistic lecturer motion.

  20. Temporal Dietary Patterns Derived among the Adult Participants of the National Health and Nutrition Examination Survey 1999-2004 Are Associated with Diet Quality.

    Science.gov (United States)

    Eicher-Miller, Heather A; Khanna, Nitin; Boushey, Carol J; Gelfand, Saul B; Delp, Edward J

    2016-02-01

    Temporal dietary patterns, the distribution of energy or nutrient intakes observed over a period of time, is an emerging area of dietary patterns research that incorporates time of dietary intake with frequency and amount of intake to determine population clusters that may have similar characteristics or outcomes related to diet quality. We examined whether differences in diet quality were present between clusters of individuals with similar daily temporal dietary patterns. The first-day 24-hour dietary recall data from the cross-sectional National Health and Nutrition Examination Survey, 1999-2004, were used to determine proportional energy intake, time of intake, frequency of intake occasions, and mean diet quality. Data from 9,326 US adults aged 20 to 65 years were included. The mean diet quality, classified by the Healthy Eating Index-2005, of participant clusters with similar temporal dietary patterns derived on the basis of individual proportional energy intake, time of intake, and frequency of intake, were inferentially compared using multiple linear regression that controlled for potential confounders and other covariates (PDiet quality differences were present between US population clusters exhibiting similar daily temporal dietary patterns (Pdiet quality, demonstrating that elements beyond food and nutrient intake, such as time, can be incorporated with dietary patterns to determine links to diet quality that enhance knowledge of the complicated interplay of time and dietary patterns. Copyright © 2016 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

  1. Food purchase patterns: empirical identification and analysis of their association with diet quality, socio-economic factors, and attitudes.

    Science.gov (United States)

    Thiele, Silke; Peltner, Jonas; Richter, Almut; Mensink, Gert B M

    2017-10-12

    Empirically derived food purchase patterns provide information about which combinations of foods were purchased from households. The objective of this study was to identify what kinds of patterns exist, which level of diet quality they represent and which factors are associated with the patterns. The study made use of representative German consumption data in which approximately 12 million food purchases from 13,125 households are recorded. In accordance with healthy diet criteria the food purchases were assigned to 18 food groups of the German Food Pyramid. Based on these groups a factor analysis with a principal component technique was applied to identify food patterns. For these patterns nutrient and energy densities were examined. Using regression analysis, associations between pattern scores and socio-economic as well as attitude variables, reflecting personal statements about healthy eating, were analyzed. In total, three food purchase patterns could be identified: a natural, a processed and a traditional one. The first one was characterized by a higher purchasing of natural foods, the second by an increased purchasing of processed foods and the third by a meat-oriented diet. In each pattern there were specific diet quality criteria that could be improved whereas others were in line with actual dietary guidelines. In addition to socio-demographic factors, attitudes were significantly associated with the purchase patterns. The findings of this study are interesting from a public health perspective, as it can be assumed that measures focusing on specific aspects of diet quality are more promising than general ones. However, it is a major challenge to identify the population groups with their specific needs of improvement. As the patterns were associated with both socio-economic and attitude variables these grouping criteria could be used to define target groups.

  2. High-quality compressive ghost imaging

    Science.gov (United States)

    Huang, Heyan; Zhou, Cheng; Tian, Tian; Liu, Dongqi; Song, Lijun

    2018-04-01

    We propose a high-quality compressive ghost imaging method based on projected Landweber regularization and guided filter, which effectively reduce the undersampling noise and improve the resolution. In our scheme, the original object is reconstructed by decomposing of regularization and denoising steps instead of solving a minimization problem in compressive reconstruction process. The simulation and experimental results show that our method can obtain high ghost imaging quality in terms of PSNR and visual observation.

  3. "Liquid-liquid-solid"-type superoleophobic surfaces to pattern polymeric semiconductors towards high-quality organic field-effect transistors.

    Science.gov (United States)

    Wu, Yuchen; Su, Bin; Jiang, Lei; Heeger, Alan J

    2013-12-03

    Precisely aligned organic-liquid-soluble semiconductor microwire arrays have been fabricated by "liquid-liquid-solid" type superoleophobic surfaces directed fluid drying. Aligned organic 1D micro-architectures can be built as high-quality organic field-effect transistors with high mobilities of >10 cm(2) ·V(-1) ·s(-1) and current on/off ratio of more than 10(6) . All these studies will boost the development of 1D microstructures of organic semiconductor materials for potential application in organic electronics. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  4. Fabrication of high-quality brazed joints

    International Nuclear Information System (INIS)

    Orlov, A.V.

    1980-01-01

    Problem of ensuring of joint high-quality when brazing different parts in power engineering is considered. To obtain high-quality joints it is necessary to correctly design brazed joint and to choose a gap width, overlap length and fillet radius; to clean up carefully the surfaces to be brazed and fix them properly one relative to another; to apply a solder so as to provide its flowing into the gap and sticking in it; to exactly regulate thermal conditions of brazing. High quality and reliability of brazed joints are ensured by the application of solders based on noble metals, and cheap solders based on nickel, manganese and copper. Joints brazed with nickel base solders may operate at temperatures as high as 888 deg C

  5. Quantitative phosphoproteomic analysis of caprine muscle with high and low meat quality.

    Science.gov (United States)

    Liu, Manshun; Wei, Yanchao; Li, Xin; Quek, Siew Young; Zhao, Jing; Zhong, Huazhen; Zhang, Dequan; Liu, Yongfeng

    2018-07-01

    During the conversion of muscle to meat, protein phosphorylation can regulate various biological processes that have important effects on meat quality. To investigate the phosphorylation pattern of protein on rigor mortis, goat longissimus thoracis and external intercostals were classified into two groups (high quality and low quality), and meat quality was evaluated according to meat quality attributes (Warner-Bratzler shear force, Color, pH and drip loss). A quantitative mass spectrometry-based phosphoproteomic study was conducted to analyze the caprine muscle at 12h postmortem applying the TiO 2 -SIMAC-HILIC (TiSH) phosphopeptide enrichment strategy. A total of 2125 phosphopeptides were identified from 750 phosphoproteins. Among them, 96 proteins had differed in phosphorylation levels. The majority of these proteins are involved in glucose metabolism and muscle contraction. The differential phosphorylation level of proteins (PFK, MYL2 and HSP27) in two groups may be the crucial factors of regulating muscle rigor mortis. This study provides a comprehensive view for the phosphorylation status of caprine muscle at rigor mortis, it also gives a better understanding of the regulation of protein phosphorylation on various biological processes that affect the final meat quality attributes. Copyright © 2018. Published by Elsevier Ltd.

  6. Nutrient Intake, Diet Quality, and Weight Measures in Breakfast Patterns Consumed by Children Compared with Breakfast Skippers: NHANES 2001-2008.

    Science.gov (United States)

    O'Neil, Carol E; Nicklas, Theresa A; Fulgoni, Victor L

    2015-01-01

    Most studies showing that children consuming breakfast have better nutrient intakes, diet quality, and lower weight than breakfast skippers have the incorrect premise that breakfast meals are homogeneous. The purpose of this study was to classify breakfast meals into patterns and determine the association of the breakfast patterns with daily and breakfast nutrient intakes, diet quality, and weight. Data from children (2-18 years of age; N = 14,200) participating in the National Health and Nutrition Examination Survey 2001-2008 were used. Intake was determined from one day 24-hour dietary recalls. Diet quality was measured using the Healthy Eating Index-2005 (HEI-2005). Body mass index (BMI) z-scores were determined. Twelve patterns (including No Breakfast [∼19% of population]), explaining 63% of the variance in energy from breakfast, were examined. Covariate adjusted general linear models were used to compare outcome variables of consumers of different patterns with breakfast skippers. The p value was Bonferroni corrected (eat Cereal (RTEC)/ LFM, RTEC/LFM, Cooked Cereal/Milk/FJ, and Whole Fruit patterns had higher total HEI-2005 scores than breakfast skippers; those consuming the MPF/ Grain/FJ pattern had lower diet quality than breakfast skippers. Consumption of the Grain/ LFM/Sweets/FJ, PSRTEC/whole milk, Soft Drinks/ FJ/Grain/Potatoes, RTEC/whole milk, and Cooked Cereal/ Milk/ FJ patterns was associated with lower BMI z-scores than seen in breakfast skippers. There are dietary and weight advantages of consuming breakfast, especially breakfasts that include grains, cereals, LFM, and fruit/ FJ, in contrast to the potential adverse effects of skipping breakfast.

  7. A Quality-Oriented Urban Development Pattern? Two Case Studies in Shanghai

    Directory of Open Access Journals (Sweden)

    Xin Yi

    Full Text Available ABSTRACT: This article concentrates on the transformation of development patterns due to economic transitions in Shanghai through two case studies looking at different spatial levels. In the transformation process, the improvement of spatial quality in the existing urban space will play the central role in achieving a balance in the future among the relevant economic, social and environmental aspects. Relatedly, economic growth is no longer seen as the only important goal. Social and environmental issues have gained more and more attention, and are increasingly seen as the basic foundation for sustainable development. Given that such significant changes have occurred within a very short period of time, the author will discuss different critical factors and related symptoms as embodied in urban planning practice. Two case studies regarding the transformation in goal setting and the implementation process will be introduced, with a focus on the issues of accessibility and quality of life. One case relates to the development plan for Hongqiao Business Park, which is one of three focus development areas for Shanghai and is located near the comprehensive Hongqiao Transport Hub. The other case considers an area located to the south of the area of interest in the first case; both areas are well connected with each other. A new development strategy for the development of new towns in knowledge economy clusters has been advanced in the outskirts of Shanghai's city center, and has also influenced such efforts on the regional level, i.e., where the Huangpu River flows through the planning area and connects to other parts of the broader Shanghai region. KEYWORDS: Quality-oriented, urban development pattern, economic transition, Shanghai

  8. Sleep patterns and habits in high school students in Iran

    Directory of Open Access Journals (Sweden)

    Moini Rozita

    2008-03-01

    Full Text Available Abstract Background Sleep patterns and habits in high school students in Iran have not been well studied to date. This paper aims to re-address this balance and analyse sleep patterns and habits in Iranian children of high school age. Methods The subjects were 1,420 high school students randomly selected by stratified cluster sampling. This was a self-report study using a questionnaire which included items about usual sleep/wake behaviours over the previous month, such as sleep schedule, falling asleep in class, difficulty falling asleep, tiredness or sleepiness during the day, difficulty getting up in the morning, nightmares, and taking sleeping pills. Results The mean duration of night sleep was 7.7 h, with no difference between girls, boys, and school year (grade. The mean time of waking in the morning was not different between genders. About 9.9% of the girls and 4.6% of the boys perceived their quality of sleep as being bad, and 58% of them reported sleepiness during the day. About 4.2% of the subjects had used medication to enhance sleep. The time of going to bed was associated with grade level and gender. Sleep latency was not associated with gender and grade leve, l and 1.4% experienced bruxism more than four times a week. Conclusion Our results are in contrast with that of previous studies that concluded sleep duration is shorter in Asia than in Europe, that boys woke-up significantly later than girls, and that the frequency of sleep latency category was associated with gender and grade level. The magnitude of the daytime sleepiness, daytime sleepiness during classes, sleep latency, and incidences of waking up at night represent major public health concerns for Iran.

  9. High Performance Embedded System for Real-Time Pattern Matching

    CERN Document Server

    Sotiropoulou, Calliope Louisa; The ATLAS collaboration; Gkaitatzis, Stamatios; Citraro, Saverio; Giannetti, Paola; Dell'Orso, Mauro

    2016-01-01

    We present an innovative and high performance embedded system for real-time pattern matching. This system is based on the evolution of hardware and algorithms developed for the field of High Energy Physics (HEP) and more specifically for the execution of extremely fast pattern matching for tracking of particles produced by proton-proton collisions in hadron collider experiments. A miniaturized version of this complex system is being developed for pattern matching in generic image processing applications. The design uses the flexibility of Field Programmable Gate Arrays (FPGAs) and the powerful Associative Memory Chip (ASIC) to achieve real-time performance. The system works as a contour identifier able to extract the salient features of an image. It is based on the principles of cognitive image processing, which means that it executes fast pattern matching and data reduction mimicking the operation of the human brain.

  10. Quality inspection of anisotropic scintillating lead tungstate (PbWO4) crystals through measurement of interferometric fringe pattern parameters

    International Nuclear Information System (INIS)

    Cocozzella, N.; Lebeau, M.; Majni, G.; Paone, N.; Rinaldi, D.

    2001-01-01

    Scintillating crystals are widely used as detectors in radiographic systems, computerized axial tomography devices and in calorimeters employed in high-energy physics. This paper results from a project motivated by the development of the CMS calorimeter at CERN, which will make use of a large number of scintillating crystals. In order to prevent crystals from breaking because of internal residual stress, a quality control system based on optic inspection of interference fringe patterns was developed. The principle of measurement procedures was theoretically modelled, and then a dedicated polariscope was designed and built, in order to observe the crystals under induced stresses or to evaluate the residual internal stresses. The results are innovative and open a new perspective for scintillating crystals quality control: the photoelastic constant normal to the optic axis of the lead tungstate crystals (PbWO 4 ) was measured, and the inspection procedure developed is applicable to mass production, not only to optimize the crystal processing, but also to establish a quality inspection procedure

  11. Quality inspection of anisotropic scintillating lead tungstate (PbWO 4) crystals through measurement of interferometric fringe pattern parameters

    Science.gov (United States)

    Cocozzella, N.; Lebeau, M.; Majni, G.; Paone, N.; Rinaldi, D.

    2001-08-01

    Scintillating crystals are widely used as detectors in radiographic systems, computerized axial tomography devices and in calorimeters employed in high-energy physics. This paper results from a project motivated by the development of the CMS calorimeter at CERN, which will make use of a large number of scintillating crystals. In order to prevent crystals from breaking because of internal residual stress, a quality control system based on optic inspection of interference fringe patterns was developed. The principle of measurement procedures was theoretically modelled, and then a dedicated polariscope was designed and built, in order to observe the crystals under induced stresses or to evaluate the residual internal stresses. The results are innovative and open a new perspective for scintillating crystals quality control: the photoelastic constant normal to the optic axis of the lead tungstate crystals (PbWO 4) was measured, and the inspection procedure developed is applicable to mass production, not only to optimize the crystal processing, but also to establish a quality inspection procedure.

  12. High-quality PVD graphene growth by fullerene decomposition on Cu foils.

    Science.gov (United States)

    Azpeitia, J; Otero-Irurueta, G; Palacio, I; Martinez, J I; Del Árbol, N Ruiz; Santoro, G; Gutiérrez, A; Aballe, L; Foerster, M; Kalbac, M; Vales, V; Mompeán, F J; García-Hernández, M; Martín-Gago, J A; Munuera, C; López, M F

    2017-08-01

    We present a new protocol to grow large-area, high-quality single-layer graphene on Cu foils at relatively low temperatures. We use C 60 molecules evaporated in ultra high vacuum conditions as carbon source. This clean environment results in a strong reduction of oxygen-containing groups as depicted by X-ray photoelectron spectroscopy (XPS). Unzipping of C 60 is thermally promoted by annealing the substrate at 800ºC during evaporation. The graphene layer extends over areas larger than the Cu crystallite size, although it is changing its orientation with respect to the surface in the wrinkles and grain boundaries, producing a modulated ring in the low energy electron diffraction (LEED) pattern. This protocol is a self-limiting process leading exclusively to one single graphene layer. Raman spectroscopy confirms the high quality of the grown graphene. This layer exhibits an unperturbed Dirac-cone with a clear n-doping of 0.77 eV, which is caused by the interaction between graphene and substrate. Density functional theory (DFT) calculations show that this interaction can be induced by a coupling between graphene and substrate at specific points of the structure leading to a local sp 3 configuration, which also contribute to the D-band in the Raman spectra.

  13. Availability of high quality weather data measurements

    DEFF Research Database (Denmark)

    Andersen, Elsa; Johansen, Jakob Berg; Furbo, Simon

    In the period 2016-2017 the project “Availability of high quality weather data measurements” is carried out at Department of Civil Engineering at the Technical University of Denmark. The aim of the project is to establish measured high quality weather data which will be easily available...... for the building energy branch and the solar energy branch in their efforts to achieve energy savings and for researchers and students carrying out projects where measured high quality weather data are needed....

  14. Limitations of patterning thin films by shadow mask high vacuum chemical vapor deposition

    International Nuclear Information System (INIS)

    Reinke, Michael; Kuzminykh, Yury; Hoffmann, Patrik

    2014-01-01

    A key factor in engineering integrated devices such as electro-optic switches or waveguides is the patterning of high quality crystalline thin films into specific geometries. In this contribution high vacuum chemical vapor deposition (HV-CVD) was employed to grow titanium dioxide (TiO 2 ) patterns onto silicon. The directed nature of precursor transport – which originates from the high vacuum environment during the process – allows shading certain regions on the substrate by shadow masks and thus depositing patterned thin films. While the use of such masks is an emerging field in stencil or shadow mask lithography, their use for structuring thin films within HV-CVD has not been reported so far. The advantage of the employed technique is the precise control of lateral spacing and of the distance between shading mask and substrate surface which is achieved by manufacturing them directly on the substrate. As precursor transport takes place in the molecular flow regime, the precursor impinging rates (and therefore the film growth rates) on the surface can be simulated as function of the reactor and shading mask geometry using a comparatively simple mathematical model. In the current contribution such a mathematical model, which predicts impinging rates on plain or shadow mask structured substrates, is presented. Its validity is confirmed by TiO 2 -deposition on plain silicon substrates (450 °C) using titanium tetra isopropoxide as precursor. Limitations of the patterning process are investigated by the deposition of TiO 2 on structured substrates and subsequent shadow mask lift-off. The geometry of the deposits is according to the mathematical model. Shading effects due to the growing film enables to fabricate deposits with predetermined variations in topography and non-flat top deposits which are complicated to obtain by classical clean room processes. As a result of the enhanced residual pressure of decomposition products and titanium precursors and the

  15. An Approach to Improve the Quality of Infrared Images of Vein-Patterns

    Directory of Open Access Journals (Sweden)

    Chih-Lung Lin

    2011-12-01

    Full Text Available This study develops an approach to improve the quality of infrared (IR images of vein-patterns, which usually have noise, low contrast, low brightness and small objects of interest, thus requiring preprocessing to improve their quality. The main characteristics of the proposed approach are that no prior knowledge about the IR image is necessary and no parameters must be preset. Two main goals are sought: impulse noise reduction and adaptive contrast enhancement technologies. In our study, a fast median-based filter (FMBF is developed as a noise reduction method. It is based on an IR imaging mechanism to detect the noisy pixels and on a modified median-based filter to remove the noisy pixels in IR images. FMBF has the advantage of a low computation load. In addition, FMBF can retain reasonably good edges and texture information when the size of the filter window increases. The most important advantage is that the peak signal-to-noise ratio (PSNR caused by FMBF is higher than the PSNR caused by the median filter. A hybrid cumulative histogram equalization (HCHE is proposed for adaptive contrast enhancement. HCHE can automatically generate a hybrid cumulative histogram (HCH based on two different pieces of information about the image histogram. HCHE can improve the enhancement effect on hot objects rather than background. The experimental results are addressed and demonstrate that the proposed approach is feasible for use as an effective and adaptive process for enhancing the quality of IR vein-pattern images.

  16. The Association between Parent Diet Quality and Child Dietary Patterns in Nine- to Eleven-Year-Old Children from Dunedin, New Zealand.

    Science.gov (United States)

    Davison, Brittany; Saeedi, Pouya; Black, Katherine; Harrex, Harriet; Haszard, Jillian; Meredith-Jones, Kim; Quigg, Robin; Skeaff, Sheila; Stoner, Lee; Wong, Jyh Eiin; Skidmore, Paula

    2017-05-11

    Previous research investigating the relationship between parents' and children's diets has focused on single foods or nutrients, and not on global diet, which may be more important for good health. The aim of the study was to investigate the relationship between parental diet quality and child dietary patterns. A cross-sectional survey was conducted in 17 primary schools in Dunedin, New Zealand. Information on food consumption and related factors in children and their primary caregiver/parent were collected. Principal component analysis (PCA) was used to investigate dietary patterns in children and diet quality index (DQI) scores were calculated in parents. Relationships between parental DQI and child dietary patterns were examined in 401 child-parent pairs using mixed regression models. PCA generated two patterns; 'Fruit and Vegetables' and 'Snacks'. A one unit higher parental DQI score was associated with a 0.03SD (CI: 0.02, 0.04) lower child 'Snacks' score. There was no significant relationship between 'Fruit and Vegetables' score and parental diet quality. Higher parental diet quality was associated with a lower dietary pattern score in children that was characterised by a lower consumption frequency of confectionery, chocolate, cakes, biscuits and savoury snacks. These results highlight the importance of parental modelling, in terms of their dietary choices, on the diet of children.

  17. Comparison of bar pattern and edge method for MTF measurement in radiology quality control

    Energy Technology Data Exchange (ETDEWEB)

    Alvarez, M.; Alves, A.F.F; Bacchim Neto, F.A.; Pavan, A.L.M.; Rosa, M.E.D.; Miranda, J.R.A.; Pina, D.R. de, E-mail: drpina@fmb.unesp.br [Universidade Estadual Paulista Julio de Mesquita Filho (UNESP), Botucatu, SP (Brazil)

    2015-08-15

    Spatial resolution is one of the parameters that is routinely checked during acceptance procedures and regular quality control measurements. The spatial resolution of a radiographic imaging device is most appropriately expressed in terms of its modulation transfer function (MTF), which indicates the decline of detector spatial resolution with spatial frequency. Traditionally used methods of MTF measurement involve imaging either a narrow slit or a sharp edge to obtain the detector line spread function (LSF), whose frequency transform leads to the MTF. In this work is presented a study of the measurement of the limiting spatial resolution using the MTF method and the line-pair bar-pattern method. Our aim is to compare the bar-pattern method with the MTF method and then evaluate what method is the best for the dairy quality control tests and when is better to perform one test or other. These acquisition procedures were tested according to its reproducibility and variation due to noise. (author)

  18. Highly qualified does not equal high quality: A study of urban stakeholders' perceptions of quality in science teaching

    Science.gov (United States)

    Miranda, Rommel Joseph

    By employing qualitative methods, this study sought to determine the perceptions that urban stakeholders hold about what characteristics should distinguish a high school science teacher whom they would consider to demonstrate high quality in science teaching. A maximum variation sample of six science teachers, three school administrators, six parents and six students from a large urban public school district were interviewed using semi-structured, in-depth interview techniques. From these data, a list of observable characteristics which urban stakeholders hold as evidence of high quality in science teaching was generated. Observational techniques were utilized to determine the extent to which six urban high school science teachers, who meet the NCLB Act criteria for being "highly qualified", actually possessed the characteristics which these stakeholders hold as evidence of high quality in science teaching. Constant comparative analysis was used to analyze the data set. The findings suggest that urban stakeholders perceive that a high school science teacher who demonstrates high quality in science teaching should be knowledgeable about their subject matter, their student population, and should be resourceful; should possess an academic background in science and professional experience in science teaching; should exhibit professionalism, a passion for science and teaching, and a dedication to teaching and student learning; should be skillful in planning and preparing science lessons and in organizing the classroom, in presenting the subject matter to students, in conducting a variety of hands-on activities, and in managing a classroom; and should assess whether students complete class goals and objectives, and provide feedback about grades for students promptly. The findings further reveal that some of the urban high school science teachers who were deemed to be "highly qualified", as defined by the NCLB Act, engaged in practices that threatened quality in science

  19. Effect of Cutting Pattern and Fertilization Level on Species Diversity and Evaluation of Grassland Quality

    Directory of Open Access Journals (Sweden)

    Josef Raus

    2014-01-01

    Full Text Available The effects of fertilization level and cutting pattern on the species diversity and quality of a meadow stand were assessed in 2004–2012 in the small plot trial established in 2003 in Vatín, Vysočina Region, Czech Republic. Four levels of fertilization (none; N0 + P30 + K60 kg∙ha−1; N90 + P30 + K60 kg∙ha−1; N180 + P30 + K60 kg∙ha−1 were combined with four treatments of exploitation intensity (4 cuts per year, first cut on 15th May, every next after 45 days; 3 cuts per year, first cut on 30th May, every next after 60 days; 2 cuts per year, first cut on 15th June, next after 90 days; 2 cuts per year, first cut on 30th June, next after 90 days. Numbers of species, Simpson’s diversity index and evaluation of grassland quality according to Novák (2004 were evaluated. Numbers of species and Simpson’s diversity index were significantly affected by both fertilization level and cutting pattern. Species richness decreased along with increasing fertilization rates from 29.4 (no fertilization to 27.8 (N180PK. When comparing cutting pattern treatments the highest species richness was found in four-cut swards (29.6 in average of fertilization levels and it declines towards late double-cut regime (27.2. The Simpson’s index generally increased from two-cut swards to four-cut and from fertilized treatments to control. Grassland quality was significantly affected by cutting pattern. Values increased from four-cut swards (38.1 to two-cut ones (43.8 and 44.0 in early and late harvest respectively.

  20. Mining of high utility-probability sequential patterns from uncertain databases.

    Directory of Open Access Journals (Sweden)

    Binbin Zhang

    Full Text Available High-utility sequential pattern mining (HUSPM has become an important issue in the field of data mining. Several HUSPM algorithms have been designed to mine high-utility sequential patterns (HUPSPs. They have been applied in several real-life situations such as for consumer behavior analysis and event detection in sensor networks. Nonetheless, most studies on HUSPM have focused on mining HUPSPs in precise data. But in real-life, uncertainty is an important factor as data is collected using various types of sensors that are more or less accurate. Hence, data collected in a real-life database can be annotated with existing probabilities. This paper presents a novel pattern mining framework called high utility-probability sequential pattern mining (HUPSPM for mining high utility-probability sequential patterns (HUPSPs in uncertain sequence databases. A baseline algorithm with three optional pruning strategies is presented to mine HUPSPs. Moroever, to speed up the mining process, a projection mechanism is designed to create a database projection for each processed sequence, which is smaller than the original database. Thus, the number of unpromising candidates can be greatly reduced, as well as the execution time for mining HUPSPs. Substantial experiments both on real-life and synthetic datasets show that the designed algorithm performs well in terms of runtime, number of candidates, memory usage, and scalability for different minimum utility and minimum probability thresholds.

  1. Fast High-Quality Noise

    DEFF Research Database (Denmark)

    Frisvad, Jeppe Revall; Wyvill, Geoff

    2007-01-01

    At the moment the noise functions available in a graphics programmer's toolbox are either slow to compute or they involve grid-line artifacts making them of lower quality. In this paper we present a real-time noise computation with no grid-line artifacts or other regularity problems. In other words......, we put a new tool in the box that computes fast high-quality noise. In addition to being free of artifacts, the noise we present does not rely on tabulated data (everything is computed on the fly) and it is easy to adjust quality vs. quantity for the noise. The noise is based on point rendering (like...... spot noise), but it extends to more than two dimensions. The fact that it is based on point rendering makes art direction of the noise much easier....

  2. Assuring quality in high-consequence engineering

    Energy Technology Data Exchange (ETDEWEB)

    Hoover, Marcey L.; Kolb, Rachel R.

    2014-03-01

    In high-consequence engineering organizations, such as Sandia, quality assurance may be heavily dependent on staff competency. Competency-dependent quality assurance models are at risk when the environment changes, as it has with increasing attrition rates, budget and schedule cuts, and competing program priorities. Risks in Sandia's competency-dependent culture can be mitigated through changes to hiring, training, and customer engagement approaches to manage people, partners, and products. Sandia's technical quality engineering organization has been able to mitigate corporate-level risks by driving changes that benefit all departments, and in doing so has assured Sandia's commitment to excellence in high-consequence engineering and national service.

  3. A high throughput DNA extraction method with high yield and quality

    Directory of Open Access Journals (Sweden)

    Xin Zhanguo

    2012-07-01

    Full Text Available Abstract Background Preparation of large quantity and high quality genomic DNA from a large number of plant samples is a major bottleneck for most genetic and genomic analyses, such as, genetic mapping, TILLING (Targeting Induced Local Lesion IN Genome, and next-generation sequencing directly from sheared genomic DNA. A variety of DNA preparation methods and commercial kits are available. However, they are either low throughput, low yield, or costly. Here, we describe a method for high throughput genomic DNA isolation from sorghum [Sorghum bicolor (L. Moench] leaves and dry seeds with high yield, high quality, and affordable cost. Results We developed a high throughput DNA isolation method by combining a high yield CTAB extraction method with an improved cleanup procedure based on MagAttract kit. The method yielded large quantity and high quality DNA from both lyophilized sorghum leaves and dry seeds. The DNA yield was improved by nearly 30 fold with 4 times less consumption of MagAttract beads. The method can also be used in other plant species, including cotton leaves and pine needles. Conclusion A high throughput system for DNA extraction from sorghum leaves and seeds was developed and validated. The main advantages of the method are low cost, high yield, high quality, and high throughput. One person can process two 96-well plates in a working day at a cost of $0.10 per sample of magnetic beads plus other consumables that other methods will also need.

  4. Nutrient Intake, Diet Quality, and Weight Measures in Breakfast Patterns Consumed by Children Compared with Breakfast Skippers: NHANES 2001-2008

    Directory of Open Access Journals (Sweden)

    Carol E. O'Neil

    2015-08-01

    Full Text Available Most studies showing that children consuming breakfast have better nutrient intakes, diet quality, and lower weight than breakfast skippers have the incorrect premise that breakfast meals are homogeneous. The purpose of this study was to classify breakfast meals into patterns and determine the association of the breakfast patterns with daily and breakfast nutrient intakes, diet quality, and weight. Data from children (2-18 years of age; N = 14,200 participating in the National Health and Nutrition Examination Survey 2001-2008 were used. Intake was determined from one day 24-hour dietary recalls. Diet quality was measured using the Healthy Eating Index-2005 (HEI-2005. Body mass index (BMI z-scores were determined. Twelve patterns (including No Breakfast [~19% of population], explaining 63% of the variance in energy from breakfast, were examined. Covariate adjusted general linear models were used to compare outcome variables of consumers of different patterns with breakfast skippers. The p value was Bonferroni corrected (< 0.05/12 = < 0.0042. Consumers of the Eggs/Grain/Meat, Poultry, Fish (MPF/Fruit Juice (FJ and MPF/Grain/FJ patterns showed higher daily intakes of saturated fats, solid fats, and sodium and lower daily intakes of added sugars than breakfast skippers. Consumers of most breakfast patterns showed higher daily intakes of some nutrients of public health concern (dietary fiber, vitamin D, calcium, and potassium; however, those consuming the Grain or MPF/Grain/FJ pattern did not. Consumers of the Grain/Lower Fat Milk (LFM/Sweets/FJ, Presweetened (PS Ready-to-eat Cereal (RTEC/LFM, RTEC/LFM, Cooked Cereal/Milk/FJ, and Whole Fruit patterns had higher total HEI-2005 scores than breakfast skippers; those consuming the MPF/Grain/FJ pattern had lower diet quality than breakfast skippers. Consumption of the Grain/LFM/Sweets/FJ, PSRTEC/whole milk, Soft Drinks/FJ/Grain/Potatoes, RTEC/whole milk, and Cooked Cereal/Milk/FJ patterns was associated

  5. A combined high-sugar and high-saturated-fat dietary pattern is associated with more depressive symptoms in a multi-ethnic population

    NARCIS (Netherlands)

    Vermeulen, Esther; Stronks, Karien; Snijder, Marieke B.; Schene, Aart H.; Lok, Anja; Vries, de Jeanne H.; Visser, Marjolein; Brouwer, Ingeborg A.; Nicolaou, Mary

    2017-01-01

    Objective: To identify a high-sugar (HS) dietary pattern, a high-saturated-fat (HF) dietary pattern and a combined high-sugar and high-saturated-fat (HSHF) dietary pattern and to explore if these dietary patterns are associated with depressive symptoms. Design: We used data from the HELIUS (Healthy

  6. Concrete Waste Recycling Process for High Quality Aggregate

    International Nuclear Information System (INIS)

    Ishikura, Takeshi; Fujii, Shin-ichi

    2008-01-01

    Large amount of concrete waste generates during nuclear power plant (NPP) dismantling. Non-contaminated concrete waste is assumed to be disposed in a landfill site, but that will not be the solution especially in the future, because of decreasing tendency of the site availability and natural resources. Concerning concrete recycling, demand for roadbeds and backfill tends to be less than the amount of dismantled concrete generated in a single rural site, and conventional recycled aggregate is limited of its use to non-structural concrete, because of its inferior quality to ordinary natural aggregate. Therefore, it is vital to develop high quality recycled aggregate for general uses of dismantled concrete. If recycled aggregate is available for high structural concrete, the dismantling concrete is recyclable as aggregate for industry including nuclear field. Authors developed techniques on high quality aggregate reclamation for large amount of concrete generated during NPP decommissioning. Concrete of NPP buildings has good features for recycling aggregate; large quantity of high quality aggregate from same origin, record keeping of the aggregate origin, and little impurities in dismantled concrete such as wood and plastics. The target of recycled aggregate in this development is to meet the quality criteria for NPP concrete as prescribed in JASS 5N 'Specification for Nuclear Power Facility Reinforced Concrete' and JASS 5 'Specification for Reinforced Concrete Work'. The target of recycled aggregate concrete is to be comparable performance with ordinary aggregate concrete. The high quality recycled aggregate production techniques are assumed to apply for recycling for large amount of non-contaminated concrete. These techniques can also be applied for slightly contaminated concrete dismantled from radiological control area (RCA), together with free release survey. In conclusion: a technology on dismantled concrete recycling for high quality aggregate was developed

  7. The Association between Parent Diet Quality and Child Dietary Patterns in Nine- to Eleven-Year-Old Children from Dunedin, New Zealand

    Directory of Open Access Journals (Sweden)

    Brittany Davison

    2017-05-01

    Full Text Available Previous research investigating the relationship between parents’ and children’s diets has focused on single foods or nutrients, and not on global diet, which may be more important for good health. The aim of the study was to investigate the relationship between parental diet quality and child dietary patterns. A cross-sectional survey was conducted in 17 primary schools in Dunedin, New Zealand. Information on food consumption and related factors in children and their primary caregiver/parent were collected. Principal component analysis (PCA was used to investigate dietary patterns in children and diet quality index (DQI scores were calculated in parents. Relationships between parental DQI and child dietary patterns were examined in 401 child-parent pairs using mixed regression models. PCA generated two patterns; ‘Fruit and Vegetables’ and ‘Snacks’. A one unit higher parental DQI score was associated with a 0.03SD (CI: 0.02, 0.04 lower child ‘Snacks’ score. There was no significant relationship between ‘Fruit and Vegetables’ score and parental diet quality. Higher parental diet quality was associated with a lower dietary pattern score in children that was characterised by a lower consumption frequency of confectionery, chocolate, cakes, biscuits and savoury snacks. These results highlight the importance of parental modelling, in terms of their dietary choices, on the diet of children.

  8. Complementary therapy use and quality of life in persons with high-grade gliomas.

    Science.gov (United States)

    Fox, Sherry; Laws, Edward R; Anderson, Frederick; Farace, Elana

    2006-08-01

    Studies have indicated that 30%-80% of cancer patients use complementary and alternative practices and products (CAPPs), but little is known about CAPPs use by persons with brain tumors. This secondary analysis of Glioma Outcomes Project data compared CAPPs users with nonusers, compared those who stopped using CAPPs with those who continued use, described frequency and patterns of CAPPs use, and compared the relationship of CAPPs use to self-reported quality of life (QOL) over time, in 186 persons with high-grade gliomas. CAPPs users at all three measurement points rated QOL higher, although not significantly higher, than nonusers. Study findings support further exploration of CAPPs use and its effects on key outcomes in persons with high-grade gliomas.

  9. Argumentation Quality of Socio-scientific Issue between High School Students and Postgraduate Students about Cancer

    Science.gov (United States)

    Anisa, A.; Widodo, A.; Riandi, R.

    2017-09-01

    Argumentation is one factor that can help improve critical thinking skills. Arguing means to defend statements with the various data, denials, evidence, and reinforcement that support the statement. The research aimed to capture the quality of argument skills by students in grade 12 high school students and in postgraduate student on social-scientific issues of cancer. Both group subjects are not in the same school or institution, chosen purposively with the subject of 39 high school students of grade 12 in one district of West Java and 13 students of Biology education postgraduate in one of University in West Java - Indonesia. The results of the quality structure of arguments in both subject groups show the same pattern, which is claim - warrant - and ground, with the quality of counterclaim aspects on the postgraduate students look better than grade 12 students. This provides an illustration that the ability in argumentation between students and teachers in the socio-scientific issue of cancer should be evaluate so that the learning process would be more refined in schools.

  10. The perspective awareness model - Eliciting multiple perspectives to formulate high quality decisions

    International Nuclear Information System (INIS)

    Boucher, Laurel

    2013-01-01

    A great deal of attention is given to the importance of communication in environmental remediation and radioactive waste management. However, very little attention is given to eliciting multiple perspectives so as to formulate high quality decisions. Plans that are based on a limited number of perspectives tend to be narrowly focused whereas those that are based on a wide variety of perspectives tend to be comprehensive, higher quality, and more apt to be put into application. In addition, existing methods of dialogue have built-in limitations in that they typically draw from the predominant thinking patterns which focus in some areas but ignore others. This can result in clarity but a lack of comprehensiveness. This paper presents a Perspective Awareness Model which helps groups such as partnering teams, interagency teams, steering committees, and working groups elicit a wide net of perspectives and viewpoints. The paper begins by describing five factors that makes cooperation among such groups challenging. Next, a Perspective Awareness Model that makes it possible to manage these five factors is presented. The two primary components of this model --- the eight 'Thinking Directions' and the 'Shared Documentation' --- are described in detail. Several examples are given to illustrate how the Perspective Awareness Model can be used to elicit multiple perspectives to formulate high quality decisions in the area of environmental remediation and radioactive waste management. (authors)

  11. Attachment quality is related to the synchrony of mother and infant monitoring patterns.

    Science.gov (United States)

    Biro, Szilvia; Alink, Lenneke R A; Huffmeijer, Renske; Bakermans-Kranenburg, Marian J; Van IJzendoorn, Marinus H

    2017-06-01

    We investigated whether attachment quality is related to infant-mother dyadic patterns in monitoring animated social situations. Sixty 12-month-old infants and their mothers participated in an eye-tracking study in which they watched abstractly depicted distress interactions involving the separation of a "baby" and a "parent" character followed by reunion or further separation of the two characters. We measured infants' and their mothers' relative fixation duration to the two characters in the animations. We found that infant attachment disorganization moderated the correspondence between the monitoring patterns of infant-mother dyads during the final part of the animations resulting in reunion or separation. Organized infants and their mothers showed complementary monitoring patterns: the more the mothers focused their attention on the "baby" character, the more the infants focused their attention on the "parent" character, and vice versa. Disorganized infant-mother dyads showed the opposite pattern although the correlation was nonsignificant: mothers and their infants focused on the same character. The attachment-related differences in the nature of the synchrony in the attentional processes of infants and their mothers suggest that by 12 months the dyads' representations of social situations reflect their shared social-emotional experiences.

  12. Air Quality Pattern Assessment in Malaysia Using Multivariate Techniques

    International Nuclear Information System (INIS)

    Hamza Ahmad Isiyaka; Azman Azid

    2015-01-01

    This study aims to investigate the spatial characteristics in the pattern of air quality monitoring sites, identify the most discriminating parameters contributing to air pollution, and predict the level of air pollution index (API) in Malaysia using multivariate techniques. Five parameters observed for five years (2000-2004) were used. Hierarchical agglomerative cluster analysis classified the five air quality monitoring sites into two independent groups based on the characteristics of activities in the monitoring stations. Discriminate analysis for standard, backward stepwise and forward stepwise mode gave a correct assignation of more than 87 % in the confusion matrix. This result indicates that only three parameters (PM_1_0, SO_2 and NO_2) with a p<0.0001 discriminate best in polluting the air. The major possible sources of air pollution were identified using principal component analysis that account for more than 58 % and 60 % in the total variance. Based on the findings, anthropogenic activities (vehicular emission, industrial activities, construction sites, bush burning) have a strong influence in the source of air pollution. Furthermore, artificial neural network (ANN) was used to predict the level of air pollution index at R"2 = 0.8493 and RMSE = 5.9184. This indicates that ANN can predict more than 84 % of the API. (author)

  13. Urgency for sustainable development in coastal urban areas with reference to weather pattern, land use, and water quality.

    Science.gov (United States)

    Sheela, A M; Letha, J; Swarnalatha, K; Baiju, K V; Sankar, Divya

    2014-05-01

    Water pollution is one of the most critical problems affecting mankind. Weather pattern and land use of catchment area have significant role in quality of water bodies. Due to climate change, there is frequent variation in weather pattern all over the world. There is also rapid change in land use due to increase in population and urbanization. The study was carried out to analyze the effect of change in weather pattern during the monsoon periods of 2008 and 2012 on water quality of a tropical coastal lake system. The nature and extent of variation in different water quality parameters namely electrical conductivity (EC), magnesium (Mg), sodium (Na), chloride (Cl), sulphate (SO4), turbidity, Secchi disk depth, biochemical oxygen demand (BOD), phosphate (PO4), calcium (Ca), and water temperature as well as the effect of various land use activities in the lake basin on water quality have also been studied. There is significant reduction in precipitation, EC, Mg, Na, Cl, SO4, turbidity, and Secchi disk depths whereas a significant rise in the BOD, PO4, Ca, and water temperature were observed in 2012. This significant reduction in electrical conductivity during 2012 revealed that because of less precipitation, the lake was separated from the sea by the sandbar during most of the monsoon period and thereby interrupted the natural flushing process. This caused the accumulation of organic matter including phosphate and thereby resulting reduction in clarity and chlorophyll-a (algae) in the lake. The unsustainable development activities of Thiruvanathapuram city are mainly responsible for the degradation of water bodies. The lack of maintenance and augmentation activities namely replacement of old pipes and periodical cleaning of pipe lines of the old sewer system in the city results in the bypass of sewage into water bodies. Because of the existence of the old sewerage system, no effort has been taken by the individual establishment/house of the city to provide their own

  14. Effect of forage quality in faeces from different ruminant species fed high and low quality forage

    DEFF Research Database (Denmark)

    Jalali, A R; Nørgaard, P; Nielsen, M O

    2010-01-01

    Effect of forage quality in faeces from different ruminant species fed high and low quality forage......Effect of forage quality in faeces from different ruminant species fed high and low quality forage...

  15. Application of a simulation model of water quality in the improvement of high basin of Rio Negro - Antioquia

    International Nuclear Information System (INIS)

    Molina Perez, Francisco; Wills Toro, Alvaro; Ramirez Cardona, Juan F

    1995-01-01

    The present article consigns the application of a model of water quality: QUAL2E, of the high basin of the Rio Negro in the East Antioquia. The system Rio Negro was divided in 16 homogeneous tracts, in which 15 seating capacity stations and sampling were located, this way 5 in the Rio Negro and 10 in the main flowing gulches. In the period October of 1993 to May of 1994, they were carried out 10 samplings of quality of the water, coupling this way, the basic data for the hydrological scenarios of summer, intermission and winter. Later on it was carried out the calibration of the pattern for the summer and the validation for winter; the parameters were refined especially suspended solids, dissolved oxygen and DBO5. The use of the pattern allows carrying out the prospective for the quality of the water in the region facilitating a better one taking of decisions in the related with the use of the resource and actions of prevention and control

  16. Low index contrast heterostructure photonic crystal cavities with high quality factors and vertical radiation coupling

    Science.gov (United States)

    Ge, Xiaochen; Minkov, Momchil; Fan, Shanhui; Li, Xiuling; Zhou, Weidong

    2018-04-01

    We report here design and experimental demonstration of heterostructure photonic crystal cavities resonating near the Γ point with simultaneous strong lateral confinement and highly directional vertical radiation patterns. The lateral confinement is provided by a mode gap originating from a gradual modulation of the hole radii. High quality factor resonance is realized with a low index contrast between silicon nitride and quartz. The near surface-normal directional emission is preserved when the size of the core region is scaled down. The influence of the cavity size parameters on the resonant modes is also investigated theoretically and experimentally.

  17. TOTAL QUALITY MANAGEMENT IN HIGH EDUCATION

    Directory of Open Access Journals (Sweden)

    Hasan SERİN, Alper AYTEKİN

    2009-01-01

    Full Text Available The approach of Total Quality Management (TQM has been even more common and most recently its use in high education has been discussed. Likewise the enterprises producing various products, universities have also inputs, processes, and outputs. Due to conditions of competition, universities have to improve the qualities of these inputs, processes, and outputs, according to satisfaction, demands, and expectations of internal and external customers. If the TQM has been implemented in the universities with a manner that aims for customer satisfaction (students, lecturers, public and private establishments, and families, supports constant development, ensures participatory approach, and encourages working in groups, it will provide universities with effectiveness, efficiency, dynamics, and economics. In this study, common problems of universities, definitions of quality and TQM in high education, customer concept at universities, and factors affecting the quality of education have been explained. Besides, in order TQM approach to be successfully implemented in the universities, various suggestions have been presented.

  18. Effect of low and high glycaemic index drink on sleep pattern in children

    International Nuclear Information System (INIS)

    Jalilolghadr, S.; Afaghi, A.; Connor, H.O.; Chow, C.M.

    2011-01-01

    Objectives: To evaluate the effect of high and low glycaemic index drinks on children's sleep pattern. Methods: Eight children underwent 3 nights of full polysomnography study, one familiarization and two test nights consecutively. On the test nights, 1 hour before bedtime, the children had a milk drink of either low or high GI in a random order. The glycaemic loads (GL) were 7.4 and 52.8 for low and high GI drink respectively. Results: The mean of total arousal index in the first half of night after the high GI was greater than that of low GI drink. (12.9 +- 4.6 vs. 9.9 +- 2.2, P=0.03). NREM arousal index in the first half of night after the high GI was also higher than that of low GI drink. (12.7+- 4.8 vs. 9.6 +- 2.3, P=0.05). Other sleep parameters did not show any significant difference in low GI and high GI diets. Conclusion: NREM and total arousal indices were higher in those who consumed high GI drinks compared with low GI, one hour before sleep. It seems that the high quantity consumption of carbohydrates close to the bedtime is accompanied by frequent arousals and may affect the sleep quality. (author)

  19. The PWR loading pattern optimization in X-IMAGE

    International Nuclear Information System (INIS)

    Stevens, J.G.; Smith, K.S.; Rempe, K.R.; Downar, T.J.

    1993-01-01

    The design of reactor core loading patterns is difficult due to the staggering number of patterns. The integer nature and nonlinear neutronic response of core design preclude simple prescriptions for generation of the feasible patterns, much less optimization among feasible candidates. Fortunately, recent developments in optimization, graphical user interfaces (GUIs), and the speed and low cost of engineering workstations combine to make loading pattern automation possible. The optimization module SIMAN has been added to X-IMAGE to automatically generate high-quality core loadings

  20. Analysis of high-quality modes in open chaotic microcavities

    International Nuclear Information System (INIS)

    Fang, W.; Yamilov, A.; Cao, H.

    2005-01-01

    We present a numerical study of the high-quality modes in two-dimensional dielectric stadium microcavities. Although the classical ray mechanics is fully chaotic in a stadium billiard, all of the high-quality modes show a 'strong scar' around unstable periodic orbits. When the deformation (ratio of the length of the straight segments over the diameter of the half circles) is small, the high-quality modes correspond to whispering-gallery-type trajectories and their quality factors decrease monotonically with increasing deformation. At large deformation, each high-quality mode is associated with multiple unstable periodic orbits. Its quality factor changes nonmonotonically with the deformation, and there exists an optimal deformation for each mode at which its quality factor reaches a local maximum. This unusual behavior is attributed to the interference of waves propagating along different constituent orbits that could minimize light leakage out of the cavity

  1. AIDS knowledge, attitude and behavioural patterns among high ...

    African Journals Online (AJOL)

    AIDS knowledge, attitude and behavioural patterns among high school students in ... Incorporating sex education into the curriculum of secondary schools will be a welcome development in stemming the tide of this dreaded disease.

  2. The Epidemiology of Sleep Quality, Sleep Patterns, Consumption of Caffeinated Beverages, and Khat Use among Ethiopian College Students.

    Science.gov (United States)

    Lemma, Seblewengel; Patel, Sheila V; Tarekegn, Yared A; Tadesse, Mahlet G; Berhane, Yemane; Gelaye, Bizu; Williams, Michelle A

    2012-01-01

    Objective. To evaluate sleep habits, sleep patterns, and sleep quality among Ethiopian college students; and to examine associations of poor sleep quality with consumption of caffeinated beverages and other stimulants. Methods. A total of 2,230 undergraduate students completed a self-administered comprehensive questionnaire which gathered information about sleep complaints, sociodemographic and lifestyle characteristics,and theuse of caffeinated beverages and khat. We used multivariable logistic regression procedures to estimate odds ratios for the associations of poor sleep quality with sociodemographic and behavioral factors. Results. Overall 52.7% of students were classified as having poor sleep quality (51.8% among males and 56.9% among females). In adjusted multivariate analyses, caffeine consumption (OR = 1.55; 95% CI: 1.25-1.92), cigarette smoking (OR = 1.68; 95% CI: 1.06-2.63), and khat use (OR = 1.72, 95% CI: 1.09-2.71) were all associated with increased odds of long-sleep latency (>30 minutes). Cigarette smoking (OR = 1.74; 95% CI: 1.11-2.73) and khat consumption (OR = 1.91; 95% CI: 1.22-3.00) were also significantly associated with poor sleep efficiency (sleep medicine. Conclusion. Findings from the present study demonstrate the high prevalence of poor sleep quality and its association with stimulant use among college students. Preventive and educational programs for students should include modules that emphasize the importance of sleep and associated risk factors.

  3. High Variability in Outcome Reporting Patterns in High-Impact ACL Literature.

    Science.gov (United States)

    Makhni, Eric C; Padaki, Ajay S; Petridis, Petros D; Steinhaus, Michael E; Ahmad, Christopher S; Cole, Brian J; Bach, Bernard R

    2015-09-16

    ACL (anterior cruciate ligament) reconstruction is one of the most commonly performed and studied procedures in modern sports medicine. A multitude of objective and subjective patient outcome measures exists; however, nonstandardized reporting patterns of these metrics may create challenges in objectively analyzing pooled results from different studies. The goal of this study was to document the variability in outcome reporting patterns in high-impact orthopaedic studies of ACL reconstruction. All clinical studies pertaining to ACL reconstruction in four high-impact-factor orthopaedic journals over a five-year period were reviewed. Biomechanical, basic science, and imaging studies were excluded, as were studies with fewer than fifty patients, yielding 119 studies for review. Incorporation of various objective and subjective outcomes was noted for each study. Substantial variability in reporting of both objective and subjective measures was noted in the study cohort. Although a majority of studies reported instrumented laxity findings, there was substantial variability in the type and method of laxity reporting. Most other objective outcomes, including range of motion, strength, and complications, were reported in <50% of all studies. Return to pre-injury level of activity was infrequently reported (24% of studies), as were patient satisfaction and pain assessment following surgery (8% and 13%, respectively). Of the patient-reported outcomes, the International Knee Documentation Committee (IKDC), Lysholm, and Tegner scores were most often reported (71%, 63%, and 42%, respectively). Substantial variability in outcome reporting patterns exists among high-impact studies of ACL reconstruction. Such variability may create challenges in interpreting results and pooling them across different studies. Copyright © 2015 by The Journal of Bone and Joint Surgery, Incorporated.

  4. High-technology exports of EEC countries: Persistence and diversity of specialization patterns

    International Nuclear Information System (INIS)

    Papagni, E.

    1992-01-01

    This analysis of the persistence and diversity of specialization patterns in EEC high technology exports is based on a package of products selected from the Eurostat database, COMEXT. High technology goods are considered as an innovative output indicator. A test of hypotheses of hysteresis and diversity of trade patterns at a national level is performed to verify some claims made by the 'evolutionary' theory of innovation and trade. The three-mode principal component analysis carried out confirms the persistence of specialization patterns of each EEC country in high technology exports, and highlights their sharp differences

  5. Influences of the land use pattern on water quality in low-order streams of the Dongjiang River basin, China: A multi-scale analysis.

    Science.gov (United States)

    Ding, Jiao; Jiang, Yuan; Liu, Qi; Hou, Zhaojiang; Liao, Jianyu; Fu, Lan; Peng, Qiuzhi

    2016-05-01

    Understanding the relationships between land use patterns and water quality in low-order streams is useful for effective landscape planning to protect downstream water quality. A clear understanding of these relationships remains elusive due to the heterogeneity of land use patterns and scale effects. To better assess land use influences, we developed empirical models relating land use patterns to the water quality of low-order streams at different geomorphic regions across multi-scales in the Dongjiang River basin using multivariate statistical analyses. The land use pattern was quantified in terms of the composition, configuration and hydrological distance of land use types at the reach buffer, riparian corridor and catchment scales. Water was sampled under summer base flow at 56 low-order catchments, which were classified into two homogenous geomorphic groups. The results indicated that the water quality of low-order streams was most strongly affected by the configuration metrics of land use. Poorer water quality was associated with higher patch densities of cropland, orchards and grassland in the mountain catchments, whereas it was associated with a higher value for the largest patch index of urban land use in the plain catchments. The overall water quality variation was explained better by catchment scale than by riparian- or reach-scale land use, whereas the spatial scale over which land use influenced water quality also varied across specific water parameters and the geomorphic basis. Our study suggests that watershed management should adopt better landscape planning and multi-scale measures to improve water quality. Copyright © 2016 Elsevier B.V. All rights reserved.

  6. High beam quality and high energy short-pulse laser with MOPA

    Science.gov (United States)

    Jin, Quanwei; Pang, Yu; Jiang, JianFeng; Tan, Liang; Cui, Lingling; Wei, Bin; Sun, Yinhong; Tang, Chun

    2018-03-01

    A high energy, high beam quality short-pulse diode-pumped Nd:YAG master oscillator power-amplifier (MOPA) laser with two amplifier stages is demonstrated. The two-rod birefringence compensation was used as beam quality controlling methods, which presents a short-pulse energy of 40 mJ with a beam quality value of M2 = 1.2 at a repetition rate of 400Hz. The MOPA system delivers a short-pulse energy of 712.5 mJ with a pulse width of 12.4 ns.The method of spherical aberration compensation is improved the beam quality, a M2 factor of 2.3 and an optical-to-optical efficiency of 27.7% is obtained at the maximum laser out power.The laser obtained 1.4J out energy with polarization integration.

  7. High quality-factor optical resonators

    International Nuclear Information System (INIS)

    Henriet, Rémi; Salzenstein, Patrice; Coillet, Aurélien; Saleh, Khaldoun; Chembo, Yanne K; Ristic, Davor; Ferrari, Maurizio; Mortier, Michel; Rasoloniaina, Alphonse; Dumeige, Yannick; Féron, Patrice; Cibiel, Gilles; Llopis, Olivier

    2014-01-01

    Various resonators are investigated for microwave photonic applications. Micro-sphere, disk and fiber ring resonators were designed, realized and characterized. Obtained quality factors are as high as Q = 10 10 . (paper)

  8. How do architecture patterns and tactics interact? A model and annotation

    NARCIS (Netherlands)

    Harrison, Neil B.; Avgeriou, Paris

    2010-01-01

    Software architecture designers inevitably work with both architecture patterns and tactics. Architecture patterns describe the high-level structure and behavior of software systems as the solution to multiple system requirements, whereas tactics are design decisions that improve individual quality

  9. Simple micro-patterning of high conductive polymer with UV-nano-imprinted patterned substrate and ethylene glycol-based second doping

    International Nuclear Information System (INIS)

    Takamatsu, Seiichi; Kurihara, Kazuma; Yamashita, Takahiro; Itoh, Toshihiro

    2014-01-01

    We have developed a simple micro-patterning process for high conductive polymer (i.e., poly (3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS)) with a patterned substrate by using an ultraviolet (UV) nano-imprint and an ethylene glycol-based second doping technique. In the patterning process, the PEDOT:PSS water dispersion is first coated only on the hydrophilic area, which is fabricated by UV nano-imprinting, forming patterned PEDOT:PSS on the substrate. The patterned PEDOT:PSS film is then immersed in the ethylene glycol as a second doping technique for increasing its conductivity. The proposed process provides simplicity in terms of shorter process steps of the UV nano-imprinting and PEDOT:PSS coating and higher conductivity of patterned PEDOT:PSS film than existing complicated micro-fabrication processes for organic materials. The 200 nm wide nano-imprinted pillar structures change the wettability of the substrate where the contact angle of the substrate is decreased from 66.8° to 33.3°. The patterning resolution with the nano-imprinted pattern substrate is down to 100 µm, which is useful for sensor applications. The conductivity increase delivers a low sheet resistance (120 Ω sq −1 ) of patterned PEDOT:PSS film. Then, the patterning of PEDOT:PSS sensor shapes with its 300 µm wide feature line and high conductivity are demonstrated. Therefore, our process leads to applications to a variety of PEDOT:PSS-based sensors. (paper)

  10. CORRELATION BETWEEN FAMILY COMMUNICATION PATTERNS AND JUVENILE DELINQUENCY IN JUNIOR HIGH SCHOOL

    Directory of Open Access Journals (Sweden)

    Zurriyatun Thoyibah

    2017-08-01

    Full Text Available Background: Adolescents who are in transition period have high risk behavior of juvenile delinquency. Communication between parents and adolescents effectively and openly could help adolescents to avoid delinquency behavior. Objective: This study aims to examine the relationship between family communication patterns and juvenile delinquency in Junior High School. Methods: This research employed a cross-sectional design with correlation description approach. There were 243 students selected using simple random sampling from the 7th and 8th grade students of Junior High School. A questionnaire of juvenile delinquency and family communication pattern were used in this study. Data were analyzed using Chi Square test. Result: The research showed that the majority juvenile delinquency category was low (65% and the majority of communication pattern was in functional category (73.3%. There was a significant relationship between family communication pattern and juvenile delinquency (p<0.05. Conclusion: Communication pattern within family have significant association with juvenile delinquency.

  11. No-reference stereoscopic image quality measurement based on generalized local ternary patterns of binocular energy response

    International Nuclear Information System (INIS)

    Zhou, Wujie; Yu, Lu

    2015-01-01

    Perceptual no-reference (NR) quality measurement of stereoscopic images has become a challenging issue in three-dimensional (3D) imaging fields. In this article, we propose an efficient binocular quality-aware features extraction scheme, namely generalized local ternary patterns (GLTP) of binocular energy response, for general-purpose NR stereoscopic image quality measurement (SIQM). More specifically, we first construct the binocular energy response of a distorted stereoscopic image with different stimuli of amplitude and phase shifts. Then, the binocular quality-aware features are generated from the GLTP of the binocular energy response. Finally, these features are mapped to the subjective quality score of the distorted stereoscopic image by using support vector regression. Experiments on two publicly available 3D databases confirm the effectiveness of the proposed metric compared with the state-of-the-art full reference and NR metrics. (paper)

  12. High-quality cardiopulmonary resuscitation: current and future directions.

    Science.gov (United States)

    Abella, Benjamin S

    2016-06-01

    Cardiopulmonary resuscitation (CPR) represents the cornerstone of cardiac arrest resuscitation care. Prompt delivery of high-quality CPR can dramatically improve survival outcomes; however, the definitions of optimal CPR have evolved over several decades. The present review will discuss the metrics of CPR delivery, and the evidence supporting the importance of CPR quality to improve clinical outcomes. The introduction of new technologies to quantify metrics of CPR delivery has yielded important insights into CPR quality. Investigations using CPR recording devices have allowed the assessment of specific CPR performance parameters and their relative importance regarding return of spontaneous circulation and survival to hospital discharge. Additional work has suggested new opportunities to measure physiologic markers during CPR and potentially tailor CPR delivery to patient requirements. Through recent laboratory and clinical investigations, a more evidence-based definition of high-quality CPR continues to emerge. Exciting opportunities now exist to study quantitative metrics of CPR and potentially guide resuscitation care in a goal-directed fashion. Concepts of high-quality CPR have also informed new approaches to training and quality improvement efforts for cardiac arrest care.

  13. Quality management manual for production of high quality cassava flour

    DEFF Research Database (Denmark)

    Dziedzoave, Nanam Tay; Abass, Adebayo Busura; Amoa-Awua, Wisdom K.

    The high quality cassava flour (HQCF) industry has just started to evolve in Africa and elsewhere. The sustainability of the growing industry, the profitability of small- and medium-scale enterprises (SMEs) that are active in the industry and good-health of consumers can best be guaranteed through...... the adoption of proper quality and food safety procedures. Cassava processing enterprises involved in the productionof HQCF must therefore be commited to the quality and food safety of the HQCF. They must have the right technology, appropriate processing machhinery, standard testing instruments...... and the necessary technical expertise. This quality manual was therefore developed to guide small- to medium-scale cassava in the design and implematation of Hazard Analysis Critical Control Point (HACCP) system and Good manufacturing Practices (GMP) plans for HQCF production. It describes the HQCF production...

  14. A Data-Driven Modeling Strategy for Smart Grid Power Quality Coupling Assessment Based on Time Series Pattern Matching

    Directory of Open Access Journals (Sweden)

    Hao Yu

    2018-01-01

    Full Text Available This study introduces a data-driven modeling strategy for smart grid power quality (PQ coupling assessment based on time series pattern matching to quantify the influence of single and integrated disturbance among nodes in different pollution patterns. Periodic and random PQ patterns are constructed by using multidimensional frequency-domain decomposition for all disturbances. A multidimensional piecewise linear representation based on local extreme points is proposed to extract the patterns features of single and integrated disturbance in consideration of disturbance variation trend and severity. A feature distance of pattern (FDP is developed to implement pattern matching on univariate PQ time series (UPQTS and multivariate PQ time series (MPQTS to quantify the influence of single and integrated disturbance among nodes in the pollution patterns. Case studies on a 14-bus distribution system are performed and analyzed; the accuracy and applicability of the FDP in the smart grid PQ coupling assessment are verified by comparing with other time series pattern matching methods.

  15. Subsidiary Linkage Patterns

    DEFF Research Database (Denmark)

    Andersson, Ulf; Perri, Alessandra; Nell, Phillip C.

    2012-01-01

    channels for spillovers to competitors. We find a curvilinear relationship between the extent of competitive pressure and the quality of a subsidiary's set of local linkages. Furthermore, the extent to which a subsidiary possesses capabilities moderates this relationship: Very capable subsidiaries...... in strongly competitive environments tend to shy away from high quality linkages. We discuss our findings in light of the literature on spillovers and inter-organizational linkages.......This paper investigates the pattern of subsidiaries' local vertical linkages under varying levels of competition and subsidiary capabilities. Contrary to most previous literature, we explicitly account for the double role of such linkages as conduits of learning prospects as well as potential...

  16. Dietary intake patterns and diet quality in a nationally representative sample of women with and without severe headache or migraine.

    Science.gov (United States)

    Evans, E Whitney; Lipton, Richard B; Peterlin, B Lee; Raynor, Hollie A; Thomas, J Graham; O'Leary, Kevin C; Pavlovic, Jelena; Wing, Rena R; Bond, Dale S

    2015-04-01

    The role of diet in migraine is not well understood. We sought to characterize usual dietary intake patterns and diet quality in a nationally representative sample of women with and without severe headache or migraine. We also examined whether the relationship between migraine and diet differs by weight status. In this analysis, women with migraine or severe headache status was determined by questionnaire for 3069 women, ages 20-50 years, who participated in the National Health and Nutrition Examination Study, 1999-2004. Women who experienced severe headaches or migraines were classified as migraine for the purposes of this analysis. Dietary intake patterns (micro- and macronutrient intake and eating frequency) and diet quality, measured by the Healthy Eating Index, 2005, were determined using one 24-hour dietary recall. Dietary intake patterns did not significantly differ between women with and without migraine. Normal weight women with migraine had significantly lower diet quality (Healthy Eating Index, 2005 total scores) than women without migraine (52.5 ± 0.9 vs. 45.9 ± 1.0; P quality differs by migraine status in normal weight women. Prospective analyses are needed to establish how diet relates to migraine onset, characteristics, and clinical features in individuals of varying weight status. © 2015 American Headache Society.

  17. The Epidemiology of Sleep Quality, Sleep Patterns, Consumption of Caffeinated Beverages, and Khat Use among Ethiopian College Students

    Directory of Open Access Journals (Sweden)

    Seblewengel Lemma

    2012-01-01

    Full Text Available Objective. To evaluate sleep habits, sleep patterns, and sleep quality among Ethiopian college students; and to examine associations of poor sleep quality with consumption of caffeinated beverages and other stimulants. Methods. A total of 2,230 undergraduate students completed a self-administered comprehensive questionnaire which gathered information about sleep complaints, sociodemographic and lifestyle characteristics,and theuse of caffeinated beverages and khat. We used multivariable logistic regression procedures to estimate odds ratios for the associations of poor sleep quality with sociodemographic and behavioral factors. Results. Overall 52.7% of students were classified as having poor sleep quality (51.8% among males and 56.9% among females. In adjusted multivariate analyses, caffeine consumption (OR=1.55; 95% CI: 1.25–1.92, cigarette smoking (OR=1.68; 95% CI: 1.06–2.63, and khat use (OR=1.72, 95% CI: 1.09–2.71 were all associated with increased odds of long-sleep latency (>30 minutes. Cigarette smoking (OR=1.74; 95% CI: 1.11–2.73 and khat consumption (OR=1.91; 95% CI: 1.22–3.00 were also significantly associated with poor sleep efficiency (<85%, as well as with increased use of sleep medicine. Conclusion. Findings from the present study demonstrate the high prevalence of poor sleep quality and its association with stimulant use among college students. Preventive and educational programs for students should include modules that emphasize the importance of sleep and associated risk factors.

  18. Quality Assurance Strategy for Existing Homes: Final Quality Management Primer for High Performing Homes

    Energy Technology Data Exchange (ETDEWEB)

    Del Bianco, M.; Taggart, J.; Sikora, J.; Wood, A.

    2012-12-01

    This guide is designed to help Building America (BA) Teams understand quality management and its role in transitioning from conventional to high performance home building and remodeling. It explains what quality means, the value of quality management systems, the unique need for QMS when building high performing homes, and the first steps to a implementing a comprehensive QMS. This document provides a framework and context for BA teams when they encounter builders and remodelers.

  19. Quality Assurance Strategy for Existing Homes. Final Quality Management Primer for High Performing Homes

    Energy Technology Data Exchange (ETDEWEB)

    Del Bianco, M. [NAHB Research Center Industry Partnership, Upper Marlboro, MD (United States); Taggart, J. [NAHB Research Center Industry Partnership, Upper Marlboro, MD (United States); Sikora, J. [NAHB Research Center Industry Partnership, Upper Marlboro, MD (United States); Wood, A. [NAHB Research Center Industry Partnership, Upper Marlboro, MD (United States)

    2012-12-01

    This guide is designed to help Building America (BA) teams understand quality management and its role in transitioning from conventional to high performance home building and remodeling. It explains what quality means, the value of quality management systems, the unique need for QMS when building high performing homes, and the first steps to a implementing a comprehensive QMS. This document provides a framework and context for BA teams when they encounter builders and remodelers.

  20. Dietary Patterns, Nutrition Knowledge, Lifestyle, and Health-Related Quality of Life: Associations with Anti-Hypertension Medication Adherence in a Sample of Australian Adults.

    Science.gov (United States)

    Khalesi, Saman; Irwin, Christopher; Sun, Jing

    2017-12-01

    Poor anti-hypertension medication (AHT) adherence can increase disease costs and adverse outcomes. Hypertensive individuals who have a better nutrition knowledge may lead a healthier lifestyle, have a better health-related quality of life (HRQoL) and greater confidence to change behaviour. On this basis, they may have better treatment adherence. To explore the association between the above-mentioned variables and AHT adherence in a group of Australian adults with high blood pressure (BP) in a cross-sectional clinical and community-based study. Adults with high BP (n = 270) completed a questionnaire including: food frequency questionnaire (FFQ), nutrition knowledge, HRQoL, self-efficacy of diet and exercise, lifestyle and AHT adherence sections. Bivariate analysis and hierarchical logistic regression were used to explore the data. Three dietary patterns were identified from the FFQ, using factor and cluster analyses (Western, Snack and Alcohol, and Balanced). We observed that following a Western dietary pattern, having lower exercise self-efficacy and shorter sleep duration were more dominant in the poor AHT adherence individuals compared to their counterparts. A positive association was observed between self-efficacy and sleep duration with AHT adherence. A Western dietary pattern was prevalent in high BP participants which slightly reduced the likelihood of good adherence. A healthier dietary pattern, better exercise self-efficacy and adequate sleep (more than six hours a night) may increase the likelihood of AHT adherence in individuals with high BP. Interventions focusing on improving these variables are required to confirm the findings of this study.

  1. Patterning of high mobility electron gases at complex oxide interfaces

    DEFF Research Database (Denmark)

    Trier, Felix; Prawiroatmodjo, G. E. D. K.; von Soosten, Merlin

    2015-01-01

    Oxide interfaces provide an opportunity for electronics. However, patterning of electron gases at complex oxide interfaces is challenging. In particular, patterning of complex oxides while preserving a high electron mobility remains underexplored and inhibits the study of quantum mechanical effects...... of amorphous-LSM (a-LSM) thin films, which acts as a hard mask during subsequent depositions. Strikingly, the patterned modulation-doped interface shows electron mobilities up to ∼8 700 cm2/V s at 2 K, which is among the highest reported values for patterned conducting complex oxide interfaces that usually...... where extended electron mean free paths are paramount. This letter presents an effective patterning strategy of both the amorphous-LaAlO3/SrTiO3 (a-LAO/STO) and modulation-doped amorphous-LaAlO3/La7/8Sr1/8MnO3/SrTiO3 (a-LAO/LSM/STO) oxide interfaces. Our patterning is based on selective wet etching...

  2. The Epidemiology of Sleep Quality, Sleep Patterns, Consumption of Caffeinated Beverages, and Khat Use among Ethiopian College Students

    OpenAIRE

    Lemma, Seblewengel; Patel, Sheila V.; Tarekegn, Yared A.; Tadesse, Mahlet G.; Berhane, Yemane; Gelaye, Bizu; Williams, Michelle A.

    2012-01-01

    Objective:. To evaluate sleep habits, sleep patterns, and sleep quality among Ethiopian college students; and to examine associations of poor sleep quality with consumption of caffeinated beverages and other stimulants. Methods:. A total of 2,230 undergraduate students completed a self-administered comprehensive questionnaire which gathered information about sleep complaints, sociodemographic and lifestyle characteristics,and theuse of caffeinated beverages and khat. We used multivariable log...

  3. Inequality in Preschool Quality? Community-Level Disparities in Access to High-Quality Learning Environments

    Science.gov (United States)

    Bassok, Daphna; Galdo, Eva

    2016-01-01

    In recent years, unequal access to high-quality preschool has emerged as a growing public policy concern. Because of data limitations, it is notoriously difficult to measure disparities in access to early learning opportunities across communities and particularly challenging to quantify gaps in access to "high-quality" programs. Research…

  4. Effects of Diet on Sleep Quality.

    Science.gov (United States)

    St-Onge, Marie-Pierre; Mikic, Anja; Pietrolungo, Cara E

    2016-09-01

    There is much emerging information surrounding the impact of sleep duration and quality on food choice and consumption in both children and adults. However, less attention has been paid to the effects of dietary patterns and specific foods on nighttime sleep. Early studies have shown that certain dietary patterns may affect not only daytime alertness but also nighttime sleep. In this review, we surveyed the literature to describe the role of food consumption on sleep. Research has focused on the effects of mixed meal patterns, such as high-carbohydrate plus low-fat or low-carbohydrate diets, over the short term on sleep. Such studies highlight a potential effect of macronutrient intakes on sleep variables, particularly alterations in slow wave sleep and rapid eye movement sleep with changes in carbohydrate and fat intakes. Other studies instead examined the intake of specific foods, consumed at a fixed time relative to sleep, on sleep architecture and quality. Those foods, specifically milk, fatty fish, tart cherry juice, and kiwifruit, are reviewed here. Studies provide some evidence for a role of certain dietary patterns and foods in the promotion of high-quality sleep, but more studies are necessary to confirm those preliminary findings. © 2016 American Society for Nutrition.

  5. Low-quality birds do not display high-quality signals: The cysteine-pheomelanin mechanism of honesty

    Science.gov (United States)

    Galván, Ismael; Wakamatsu, Kazumasa; Camarero, Pablo R; Mateo, Rafael; Alonso-Alvarez, Carlos

    2015-01-01

    The mechanisms that make that the costs of producing high-quality signals are unaffordable to low-quality signalers are a current issue in animal communication. The size of the melanin-based bib of male house sparrows Passer domesticus honestly signals quality. We induced the development of new bibs while treating males with buthionine-sulfoximine (BSO), a substance that depletes the levels of the antioxidant glutathione (GSH) and the amino acid cysteine, two elements that switch melanogenesis from eumelanin to pheomelanin. Final bib size is negatively related to pheomelanin levels in the bib feathers. BSO reduced cysteine and GSH levels in all birds, but improved phenotypes (bibs larger than controls) were only expressed by high-quality birds (BSO birds with largest bibs initially). Negative associations between final bib size and cysteine levels in erythrocytes, and between pheomelanin and cysteine levels, were observed in high-quality birds only. These findings suggest that a mechanism uncoupling pheomelanin and cysteine levels may have evolved in low-quality birds to avoid producing bibs of size not corresponding to their quality and greater relative costs. Indeed, greater oxidative stress in cells was not observed in low-quality birds. This may represent the first mechanism maintaining signal honesty without producing greater relative costs on low-quality signalers. PMID:25330349

  6. High Power Picosecond Laser Surface Micro-texturing of H13 Tool Steel and Pattern Replication onto ABS Plastics via Injection Moulding

    Science.gov (United States)

    Otanocha, Omonigho B.; Li, Lin; Zhong, Shan; Liu, Zhu

    2016-03-01

    H13 tool steels are often used as dies and moulds for injection moulding of plastic components. Certain injection moulded components require micro-patterns on their surfaces in order to modify the physical properties of the components or for better mould release to reduce mould contamination. With these applications it is necessary to study micro-patterning to moulds and to ensure effective pattern transfer and replication onto the plastic component during moulding. In this paper, we report an investigation into high average powered (100 W) picosecond laser interactions with H13 tool steel during surface micro-patterning (texturing) and the subsequent pattern replication on ABS plastic material through injection moulding. Design of experiments and statistical modelling were used to understand the influences of laser pulse repetition rate, laser fluence, scanning velocity, and number of scans on the depth of cut, kerf width and heat affected zones (HAZ) size. The characteristics of the surface patterns are analysed. The process parameter interactions and significance of process parameters on the processing quality and efficiency are characterised. An optimum operating window is recommended. The transferred geometry is compared with the patterns generated on the dies. A discussion is made to explain the characteristics of laser texturing and pattern replication on plastics.

  7. Comprehensive Chemical Fingerprinting of High-Quality Cocoa at Early Stages of Processing: Effectiveness of Combined Untargeted and Targeted Approaches for Classification and Discrimination.

    Science.gov (United States)

    Magagna, Federico; Guglielmetti, Alessandro; Liberto, Erica; Reichenbach, Stephen E; Allegrucci, Elena; Gobino, Guido; Bicchi, Carlo; Cordero, Chiara

    2017-08-02

    This study investigates chemical information of volatile fractions of high-quality cocoa (Theobroma cacao L. Malvaceae) from different origins (Mexico, Ecuador, Venezuela, Columbia, Java, Trinidad, and Sao Tomè) produced for fine chocolate. This study explores the evolution of the entire pattern of volatiles in relation to cocoa processing (raw, roasted, steamed, and ground beans). Advanced chemical fingerprinting (e.g., combined untargeted and targeted fingerprinting) with comprehensive two-dimensional gas chromatography coupled with mass spectrometry allows advanced pattern recognition for classification, discrimination, and sensory-quality characterization. The entire data set is analyzed for 595 reliable two-dimensional peak regions, including 130 known analytes and 13 potent odorants. Multivariate analysis with unsupervised exploration (principal component analysis) and simple supervised discrimination methods (Fisher ratios and linear regression trees) reveal informative patterns of similarities and differences and identify characteristic compounds related to sample origin and manufacturing step.

  8. Understanding adolescents' sleep patterns and school performance: a critical appraisal.

    Science.gov (United States)

    Wolfson, Amy R; Carskadon, Mary A

    2003-12-01

    The present paper reviews and critiques studies assessing the relation between sleep patterns, sleep quality, and school performance of adolescents attending middle school, high school, and/or college. The majority of studies relied on self-report, yet the researchers approached the question with different designs and measures. Specifically, studies looked at (1) sleep/wake patterns and usual grades, (2) school start time and phase preference in relation to sleep habits and quality and academic performance, and (3) sleep patterns and classroom performance (e.g., examination grades). The findings strongly indicate that self-reported shortened total sleep time, erratic sleep/wake schedules, late bed and rise times, and poor sleep quality are negatively associated with academic performance for adolescents from middle school through the college years. Limitations of the current published studies are also discussed in detail in this review.

  9. An Overview of Food Patterns and Diet Quality in Qatar: Findings from the National Household Income Expenditure Survey

    OpenAIRE

    Akram, Hammad

    2017-01-01

    Abstract Introduction Availability of accurate data pertaining to a population’s dietary patterns and associated health outcomes is critical for proper development and implementation of related policies. This article is a first attempt to share the food patterns, amounts and diet quality among households (HH) in Qatar. Methods Data from the 2012-2013 Qatar National Household Income and Expenditure Survey (HIES) was used. This cross-sectional survey included 3723 HH (1826 Qatar...

  10. Emblems of Quality in Higher Education. Developing and Sustaining High-Quality Programs.

    Science.gov (United States)

    Haworth, Jennifer Grant; Conrad, Clifton F.

    This book proposes an "engagement" theory of program quality to evaluate and improve higher education programs at all degree levels. Based on interviews with 781 participants in a national study of Masters degree programs, it focuses on the interactive roles of students, faculty, and administrators in developing high-quality programs…

  11. U.S. High School Graduation Rates: Patterns and Explanations

    OpenAIRE

    Richard J. Murnane

    2013-01-01

    I survey the evidence on patterns in U.S. high school graduation rates over the period 1970–2010 and report the results of new research conducted to fill in holes in the evidence. I begin by pointing out the strengths and limitations of existing data sources. I then describe six striking patterns in graduation rates. They include stagnation over the last three decades of the twentieth century, significant race-, income-, and gender-based gaps, and significant increases in graduation rates o...

  12. High performance GaN-based LEDs on patterned sapphire substrate with patterned composite SiO2/Al2O3 passivation layers and TiO2/Al2O3 DBR backside reflector.

    Science.gov (United States)

    Guo, Hao; Zhang, Xiong; Chen, Hongjun; Zhang, Peiyuan; Liu, Honggang; Chang, Hudong; Zhao, Wei; Liao, Qinghua; Cui, Yiping

    2013-09-09

    GaN-based light-emitting diodes (LEDs) on patterned sapphire substrate (PSS) with patterned composite SiO(2)/Al(2)O(3) passivation layers and TiO(2)/Al(2)O(3) distributed Bragg reflector (DBR) backside reflector have been proposed and fabricated. Highly passivated Al(2)O(3) layer deposited on indium tin oxide (ITO) layer with excellent uniformity and quality has been achieved with atomic layer deposition (ALD) technology. With a 60 mA current injection, an enhancement of 21.6%, 59.7%, and 63.4% in the light output power (LOP) at 460 nm wavelength was realized for the LED with the patterned composite SiO(2)/Al(2)O(3) passivation layers, the LED with the patterned composite SiO(2)/Al(2)O(3) passivation layers and Ag mirror + 3-pair TiO(2)/SiO(2) DBR backside reflector, and the LED with the patterned composite SiO(2)/Al(2)O(3) passivation layer and Ag mirror + 3-pair ALD-grown TiO(2)/Al(2)O(3) DBR backside reflector as compared with the conventional LED only with a single SiO(2) passivation layer, respectively.

  13. Long quantum channels for high-quality entanglement transfer

    International Nuclear Information System (INIS)

    Banchi, L; Apollaro, T J G; Cuccoli, A; Verrucchi, P; Vaia, R

    2011-01-01

    High-quality quantum-state and entanglement transfer can be achieved in an unmodulated spin bus operating in the ballistic regime, which occurs when the endpoint qubits A and B are nonperturbatively coupled to the chain by a suitable exchange interaction j 0 . Indeed, the transition amplitude characterizing the transfer quality exhibits a maximum for a finite optimal value j opt 0 (N), where N is the channel length. We show that j opt 0 (N) scales as N -1/6 for large N and that it ensures a high-quality entanglement transfer even in the limit of arbitrarily long channels, almost independently of the channel initialization. For instance, for any chain length the average quantum-state transmission fidelity exceeds 90% and decreases very little in a broad neighbourhood of j opt 0 (N). We emphasize that, taking the reverse point of view, should j 0 be experimentally constrained, high-quality transfer can still be obtained by adjusting the channel length to its optimal value. (paper)

  14. Identifying suitable substrates for high-quality graphene-based heterostructures

    Science.gov (United States)

    Banszerus, L.; Janssen, H.; Otto, M.; Epping, A.; Taniguchi, T.; Watanabe, K.; Beschoten, B.; Neumaier, D.; Stampfer, C.

    2017-06-01

    We report on a scanning confocal Raman spectroscopy study investigating the strain-uniformity and the overall strain and doping of high-quality chemical vapour deposited (CVD) graphene-based heterostuctures on a large number of different substrate materials, including hexagonal boron nitride (hBN), transition metal dichalcogenides, silicon, different oxides and nitrides, as well as polymers. By applying a hBN-assisted, contamination free, dry transfer process for CVD graphene, high-quality heterostructures with low doping densities and low strain variations are assembled. The Raman spectra of these pristine heterostructures are sensitive to substrate-induced doping and strain variations and are thus used to probe the suitability of the substrate material for potential high-quality graphene devices. We find that the flatness of the substrate material is a key figure for gaining, or preserving high-quality graphene.

  15. Stability and Patterns of Classroom Quality in German Early Childhood Education and Care

    Science.gov (United States)

    Kuger, Susanne; Kluczniok, Katharina; Kaplan, David; Rossbach, Hans-Guenther

    2016-01-01

    Many education systems worldwide have dedicated a significant amount of resources to improve quality levels in early childhood education and care. Research can contribute to this goal by providing information about conditions of high-quality education and care and reasons for changes in the quality provided to children. This study therefore…

  16. Mathematical modeling of high-rate Anammox UASB reactor based on granular packing patterns

    International Nuclear Information System (INIS)

    Tang, Chong-Jian; He, Rui; Zheng, Ping; Chai, Li-Yuan; Min, Xiao-Bo

    2013-01-01

    Highlights: ► A novel model was conducted to estimate volumetric nitrogen conversion rates. ► The packing patterns of the granules in Anammox reactor are investigated. ► The simple cubic packing pattern was simulated in high-rate Anammox UASB reactor. ► Operational strategies concerning sludge concentration were proposed by the modeling. -- Abstract: A novel mathematical model was developed to estimate the volumetric nitrogen conversion rates of a high-rate Anammox UASB reactor based on the packing patterns of granular sludge. A series of relationships among granular packing density, sludge concentration, hydraulic retention time and volumetric conversion rate were constructed to correlate Anammox reactor performance with granular packing patterns. It was suggested that the Anammox granules packed as the equivalent simple cubic pattern in high-rate UASB reactor with packing density of 50–55%, which not only accommodated a high concentration of sludge inside the reactor, but also provided large pore volume, thus prolonging the actual substrate conversion time. Results also indicated that it was necessary to improve Anammox reactor performance by enhancing substrate loading when sludge concentration was higher than 37.8 gVSS/L. The established model was carefully calibrated and verified, and it well simulated the performance of granule-based high-rate Anammox UASB reactor

  17. Mathematical modeling of high-rate Anammox UASB reactor based on granular packing patterns

    Energy Technology Data Exchange (ETDEWEB)

    Tang, Chong-Jian, E-mail: chjtangzju@yahoo.com.cn [Department of Environmental Engineering, School of Metallurgical Science and Engineering, Central South University, Changsha 410083 (China); National Engineering Research Center for Control and Treatment of Heavy Metal Pollution, Changsha 410083 (China); He, Rui; Zheng, Ping [Department of Environmental Engineering, Zhejiang University, Zijingang Campus, Hangzhou 310058 (China); Chai, Li-Yuan; Min, Xiao-Bo [Department of Environmental Engineering, School of Metallurgical Science and Engineering, Central South University, Changsha 410083 (China); National Engineering Research Center for Control and Treatment of Heavy Metal Pollution, Changsha 410083 (China)

    2013-04-15

    Highlights: ► A novel model was conducted to estimate volumetric nitrogen conversion rates. ► The packing patterns of the granules in Anammox reactor are investigated. ► The simple cubic packing pattern was simulated in high-rate Anammox UASB reactor. ► Operational strategies concerning sludge concentration were proposed by the modeling. -- Abstract: A novel mathematical model was developed to estimate the volumetric nitrogen conversion rates of a high-rate Anammox UASB reactor based on the packing patterns of granular sludge. A series of relationships among granular packing density, sludge concentration, hydraulic retention time and volumetric conversion rate were constructed to correlate Anammox reactor performance with granular packing patterns. It was suggested that the Anammox granules packed as the equivalent simple cubic pattern in high-rate UASB reactor with packing density of 50–55%, which not only accommodated a high concentration of sludge inside the reactor, but also provided large pore volume, thus prolonging the actual substrate conversion time. Results also indicated that it was necessary to improve Anammox reactor performance by enhancing substrate loading when sludge concentration was higher than 37.8 gVSS/L. The established model was carefully calibrated and verified, and it well simulated the performance of granule-based high-rate Anammox UASB reactor.

  18. An Overview of Food Patterns and Diet Quality in Qatar: Findings from the National Household Income Expenditure Survey

    OpenAIRE

    Al-Thani, Mohammed; Al-Thani, Al-Anoud; Al-Mahdi, Nasser; Al-Kareem, Hefzi; Barakat, Darine; Al-Chetachi, Walaa; Tawfik, Afaf; Akram, Hammad

    2017-01-01

    Introduction Availability of accurate data pertaining to a population?s dietary patterns and associated health outcomes is critical for proper development and implementation of related policies. This article is a first?attempt to share the food patterns, amounts and diet quality among households (HH) in Qatar. Methods Data from the 2012-2013 Qatar National Household Income and Expenditure Survey (HIES) was used. This cross-sectional survey included 3723 HH (1826 Qatari HH and 1897 non-Qatari ...

  19. PANTHER. Pattern ANalytics To support High-performance Exploitation and Reasoning.

    Energy Technology Data Exchange (ETDEWEB)

    Czuchlewski, Kristina Rodriguez [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Hart, William E. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2015-09-01

    Sandia has approached the analysis of big datasets with an integrated methodology that uses computer science, image processing, and human factors to exploit critical patterns and relationships in large datasets despite the variety and rapidity of information. The work is part of a three-year LDRD Grand Challenge called PANTHER (Pattern ANalytics To support High-performance Exploitation and Reasoning). To maximize data analysis capability, Sandia pursued scientific advances across three key technical domains: (1) geospatial-temporal feature extraction via image segmentation and classification; (2) geospatial-temporal analysis capabilities tailored to identify and process new signatures more efficiently; and (3) domain- relevant models of human perception and cognition informing the design of analytic systems. Our integrated results include advances in geographical information systems (GIS) in which we discover activity patterns in noisy, spatial-temporal datasets using geospatial-temporal semantic graphs. We employed computational geometry and machine learning to allow us to extract and predict spatial-temporal patterns and outliers from large aircraft and maritime trajectory datasets. We automatically extracted static and ephemeral features from real, noisy synthetic aperture radar imagery for ingestion into a geospatial-temporal semantic graph. We worked with analysts and investigated analytic workflows to (1) determine how experiential knowledge evolves and is deployed in high-demand, high-throughput visual search workflows, and (2) better understand visual search performance and attention. Through PANTHER, Sandia's fundamental rethinking of key aspects of geospatial data analysis permits the extraction of much richer information from large amounts of data. The project results enable analysts to examine mountains of historical and current data that would otherwise go untouched, while also gaining meaningful, measurable, and defensible insights into

  20. Sleep-wake and melatonin pattern in craniopharyngioma patients.

    Science.gov (United States)

    Pickering, Line; Jennum, Poul; Gammeltoft, Steen; Poulsgaard, Lars; Feldt-Rasmussen, Ulla; Klose, Marianne

    2014-06-01

    To assess the influence of craniopharyngioma or consequent surgery on melatonin secretion, and the association with fatigue, sleepiness, sleep pattern and sleep quality. Cross-sectional study. A total of 15 craniopharyngioma patients were individually matched to healthy controls. In this study, 24-h salivary melatonin and cortisol were measured. Sleep-wake patterns were characterised by actigraphy and sleep diaries recorded for 2 weeks. Sleepiness, fatigue, sleep quality and general health were assessed by Multidimensional Fatigue Inventory, Pittsburgh Sleep Quality Index, Epworth Sleepiness Scale and Short-Form 36. Patients had increased mental fatigue, daytime dysfunction, sleep latency and lower general health (all, P≤0.05), and they tended to have increased daytime sleepiness, general fatigue and impaired sleep quality compared with controls. The degree of hypothalamic injury was associated with an increased BMI and lower mental health (P=0.01). High BMI was associated with increased daytime sleepiness, daytime dysfunction, mental fatigue and lower mental health (all, P≤0.01). Low midnight melatonin was associated with reduced sleep time and efficiency (P≤0.03) and a tendency for increased sleepiness, impaired sleep quality and physical health. Midnight melatonin remained independently related to sleep time after adjustment for cortisol. Three different patterns of melatonin profiles were observed; normal (n=6), absent midnight peak (n=6) and phase-shifted peak (n=2). Only patients with absent midnight peak had impaired sleep quality, increased daytime sleepiness and general and mental fatigue. Craniopharyngioma patients present with changes in circadian pattern and daytime symptoms, which may be due to the influence of the craniopharyngioma or its treatment on the hypothalamic circadian and sleep regulatory nuclei. © 2014 European Society of Endocrinology.

  1. A Filtration-based Method of Preparing High-quality Nuclei from Cross-linked Skeletal Muscle for Chromatin Immunoprecipitation.

    Science.gov (United States)

    Nohara, Kazunari; Chen, Zheng; Yoo, Seung-Hee

    2017-07-06

    Chromatin immunoprecipitation (ChIP) is a powerful method to determine protein binding to chromatin DNA. Fiber-rich skeletal muscle, however, has been a challenge for ChIP due to technical difficulty in isolation of high-quality nuclei with minimal contamination of myofibrils. Previous protocols have attempted to purify nuclei before cross-linking, which incurs the risk of altered DNA-protein interaction during the prolonged nuclei preparation process. In the current protocol, we first cross-linked the skeletal muscle tissue collected from mice, and the tissues were minced and sonicated. Since we found that ultracentrifugation was not able to separate nuclei from myofibrils using cross-linked muscle tissue, we devised a sequential filtration procedure to obtain high-quality nuclei devoid of significant myofibril contamination. We subsequently prepared chromatin by using an ultrasonicator, and ChIP assays with anti-BMAL1 antibody revealed robust circadian binding pattern of BMAL1 to target gene promoters. This filtration protocol constitutes an easily applicable method to isolate high-quality nuclei from cross-linked skeletal muscle tissue, allowing consistent sample processing for circadian and other time-sensitive studies. In combination with next-generation sequencing (NGS), our method can be deployed for various mechanistic and genomic studies focusing on skeletal muscle function.

  2. The impact of traffic-flow patterns on air quality in urban street canyons.

    Science.gov (United States)

    Thaker, Prashant; Gokhale, Sharad

    2016-01-01

    We investigated the effect of different urban traffic-flow patterns on pollutant dispersion in different winds in a real asymmetric street canyon. Free-flow traffic causes more turbulence in the canyon facilitating more dispersion and a reduction in pedestrian level concentration. The comparison of with and without a vehicle-induced-turbulence revealed that when winds were perpendicular, the free-flow traffic reduced the concentration by 73% on the windward side with a minor increase of 17% on the leeward side, whereas for parallel winds, it reduced the concentration by 51% and 29%. The congested-flow traffic increased the concentrations on the leeward side by 47% when winds were perpendicular posing a higher risk to health, whereas reduced it by 17-42% for parallel winds. The urban air quality and public health can, therefore, be improved by improving the traffic-flow patterns in street canyons as vehicle-induced turbulence has been shown to contribute significantly to dispersion. Copyright © 2015 Elsevier Ltd. All rights reserved.

  3. Ultrasmooth Patterned Metals for Plasmonics and Metamaterials

    Science.gov (United States)

    Nagpal, Prashant; Lindquist, Nathan C.; Oh, Sang-Hyun; Norris, David J.

    2009-07-01

    Surface plasmons are electromagnetic waves that can exist at metal interfaces because of coupling between light and free electrons. Restricted to travel along the interface, these waves can be channeled, concentrated, or otherwise manipulated by surface patterning. However, because surface roughness and other inhomogeneities have so far limited surface-plasmon propagation in real plasmonic devices, simple high-throughput methods are needed to fabricate high-quality patterned metals. We combined template stripping with precisely patterned silicon substrates to obtain ultrasmooth pure metal films with grooves, bumps, pyramids, ridges, and holes. Measured surface-plasmon-propagation lengths on the resulting surfaces approach theoretical values for perfectly flat films. With the use of our method, we demonstrated structures that exhibit Raman scattering enhancements above 107 for sensing applications and multilayer films for optical metamaterials.

  4. Quality Estimation for Vascular Pattern Recognition

    DEFF Research Database (Denmark)

    Hartung, Daniel; Martin, Sophie; Busch, Christoph

    2011-01-01

    The quality of captured samples is a critical aspect in biometric systems. In this paper we present a quality estimation algorithm for vascular images, which uses global and local features based on a Grey Level Co-Occurrence Matrix (GLCM) and optionally available metadata. An evaluation of the al...

  5. Automated system for the determination of patterns of high-intensity LEDs

    International Nuclear Information System (INIS)

    Baly, L.; Bolaño, L.; Arteche, R.; Broco, Y.; Quesada, I.; Rodríguez, E.

    2008-01-01

    Determination of high-intensity LEDs lighting patterns is an important step for the simulation and planning of arrays of these devices configurations. Currently there are systems based on CCD cameras able to efficiently solve this problem, however the high cost of these is a limiting factor for use. Another limitation of CCD cameras, is that they are designed for light levels much lower than those produced by a high-intensity LED. In this paper we present an automated system for the determination of the intensity of LEDs based on the scan point to point patterns. The results of the analysis of a type of LED based on arrays of bars with built-in optical system is presented.

  6. High precision patterning of ITO using femtosecond laser annealing process

    International Nuclear Information System (INIS)

    Cheng, Chung-Wei; Lin, Cen-Ying

    2014-01-01

    Highlights: • We have reported a process of fabrication of crystalline indium tin oxide (c-ITO) patterns using femtosecond laser-induced crystallization with a Gaussian beam profile followed by chemical etching. • The experimental results have demonstrated that the ablation and crystallization threshold fluences of a-ITO thin film are well-defined, the line width of the c-ITO patterns is controllable. • Fast fabrication of the two parallel sub-micro (∼0.5 μm) c-ITO line patterns using a single femtosecond laser beam and a single scanning path can be achieved. • A long-length sub-micro c-ITO line pattern is fabricated, and the feasibility of fabricating c-ITO patterns is confirmed, which are expected to be used in micro-electronics devices. - Abstract: High precision patterning of crystalline indium tin oxide (c-ITO) patterns on amorphous ITO (a-ITO) thin films by femtosecond laser-induced crystallization with a Gaussian beam profile followed by chemical etching is demonstrated. In the proposed approach, the a-ITO thin film is selectively transformed into a c-ITO structure via a low heat affect zone and the well-defined thresholds (ablation and crystallization) supplied by the femtosecond laser pulse. The experimental results show that by careful control of the laser fluence above the crystallization threshold, c-ITO patterns with controllable line widths and ridge-free characteristics can be accomplished. By careful control of the laser fluence above the ablation threshold, fast fabrication of the two parallel sub-micro c-ITO line patterns using a single femtosecond laser beam and single scanning path can be achieved. Along-length sub-micro c-ITO line pattern is fabricated, and the feasibility of fabricating c-ITO patterns is confirmed, which are expected to be used in micro-electronics devices

  7. The association between diet quality, dietary patterns and depression in adults: a systematic review

    Science.gov (United States)

    2013-01-01

    Background Recent evidence suggests that diet modifies key biological factors associated with the development of depression; however, associations between diet quality and depression are not fully understood. We performed a systematic review to evaluate existing evidence regarding the association between diet quality and depression. Method A computer-aided literature search was conducted using Medline, CINAHL, and PsycINFO, January 1965 to October 2011, and a best-evidence analysis performed. Results Twenty-five studies from nine countries met eligibility criteria. Our best-evidence analyses found limited evidence to support an association between traditional diets (Mediterranean or Norwegian diets) and depression. We also observed a conflicting level of evidence for associations between (i) a traditional Japanese diet and depression, (ii) a “healthy” diet and depression, (iii) a Western diet and depression, and (iv) individuals with depression and the likelihood of eating a less healthy diet. Conclusion To our knowledge, this is the first review to synthesize and critically analyze evidence regarding diet quality, dietary patterns and depression. Further studies are urgently required to elucidate whether a true causal association exists. PMID:23802679

  8. High quality data: An evaluation of AIM data quality and data quality procedures

    Science.gov (United States)

    The goal of every monitoring program is to collect high-quality data which can then be used to provide information to decision makers. The Bureau of Land Management (BLM) Assessment, Inventory, and Monitoring (AIM) program is one such data set which provides rangeland status, condition, and trend in...

  9. Health-related quality of life in children with high-functioning autism.

    Science.gov (United States)

    Potvin, Marie-Christine; Snider, Laurie; Prelock, Patricia A; Wood-Dauphinee, Sharon; Kehayia, Eva

    2015-01-01

    The health-related quality of life of school-aged children with high-functioning autism is poorly understood. The objectives of this study were to compare the health-related quality of life of children with high-functioning autism to that of typically developing peers and to compare child-self and parent-proxy reports of health-related quality of life of children. A cross-sectional study of children with high-functioning autism (n = 30) and peers (n = 31) was conducted using the Pediatric Quality of Life Inventory 4.0 Generic Core Scales. Children with high-functioning autism had significantly poorer health-related quality of life than peers whether reported by themselves (p children and parental scores suggested variance in points of view. This study specifically investigated health-related quality of life in children with high-functioning autism as compared to a sample of peers, from the child's perspective. It strengthens earlier findings that children with high-functioning autism experience poorer health-related quality of life than those without this disorder and points to the importance of clinicians working with families to identify areas in a child's life that promote or hinder their sense of well-being. © The Author(s) 2013.

  10. Pattern of interstitial lung disease detected by high resolution ...

    African Journals Online (AJOL)

    Background: Diffuse lung diseases constitute a major cause of morbidity and mortality worldwide. High Resolution Computed Tomography (HRCT) is the recommended imaging technique in the diagnosis, assessment and followup of these diseases. Objectives: To describe the pattern of HRCT findings in patients with ...

  11. Mother-Child Interactional Patterns in High- and Low-Risk Mothers.

    Science.gov (United States)

    Dolz, Laura; Cerezo, M. Angeles; Milner, Joel S.

    1997-01-01

    A study of 10 high-risk (of child physical abuse) and 10 demographically similar low-risk Spanish mother-child dyads investigated interactional patterns in the home. High-risk mothers made fewer neutral approaches to their children, displayed more negative behaviors toward their children, and made more indiscriminate responses to their children's…

  12. Image Quality in High-resolution and High-cadence Solar Imaging

    Science.gov (United States)

    Denker, C.; Dineva, E.; Balthasar, H.; Verma, M.; Kuckein, C.; Diercke, A.; González Manrique, S. J.

    2018-03-01

    Broad-band imaging and even imaging with a moderate bandpass (about 1 nm) provides a photon-rich environment, where frame selection (lucky imaging) becomes a helpful tool in image restoration, allowing us to perform a cost-benefit analysis on how to design observing sequences for imaging with high spatial resolution in combination with real-time correction provided by an adaptive optics (AO) system. This study presents high-cadence (160 Hz) G-band and blue continuum image sequences obtained with the High-resolution Fast Imager (HiFI) at the 1.5-meter GREGOR solar telescope, where the speckle-masking technique is used to restore images with nearly diffraction-limited resolution. The HiFI employs two synchronized large-format and high-cadence sCMOS detectors. The median filter gradient similarity (MFGS) image-quality metric is applied, among others, to AO-corrected image sequences of a pore and a small sunspot observed on 2017 June 4 and 5. A small region of interest, which was selected for fast-imaging performance, covered these contrast-rich features and their neighborhood, which were part of Active Region NOAA 12661. Modifications of the MFGS algorithm uncover the field- and structure-dependency of this image-quality metric. However, MFGS still remains a good choice for determining image quality without a priori knowledge, which is an important characteristic when classifying the huge number of high-resolution images contained in data archives. In addition, this investigation demonstrates that a fast cadence and millisecond exposure times are still insufficient to reach the coherence time of daytime seeing. Nonetheless, the analysis shows that data acquisition rates exceeding 50 Hz are required to capture a substantial fraction of the best seeing moments, significantly boosting the performance of post-facto image restoration.

  13. Associating co-authorship patterns with publications in high-impact journals.

    Science.gov (United States)

    Bales, Michael E; Dine, Daniel C; Merrill, Jacqueline A; Johnson, Stephen B; Bakken, Suzanne; Weng, Chunhua

    2014-12-01

    To develop a method for investigating co-authorship patterns and author team characteristics associated with the publications in high-impact journals through the integration of public MEDLINE data and institutional scientific profile data. For all current researchers at Columbia University Medical Center, we extracted their publications from MEDLINE authored between years 2007 and 2011 and associated journal impact factors, along with author academic ranks and departmental affiliations obtained from Columbia University Scientific Profiles (CUSP). Chi-square tests were performed on co-authorship patterns, with Bonferroni correction for multiple comparisons, to identify team composition characteristics associated with publication impact factors. We also developed co-authorship networks for the 25 most prolific departments between years 2002 and 2011 and counted the internal and external authors, inter-connectivity, and centrality of each department. Papers with at least one author from a basic science department are significantly more likely to appear in high-impact journals than papers authored by those from clinical departments alone. Inclusion of at least one professor on the author list is strongly associated with publication in high-impact journals, as is inclusion of at least one research scientist. Departmental and disciplinary differences in the ratios of within- to outside-department collaboration and overall network cohesion are also observed. Enrichment of co-authorship patterns with author scientific profiles helps uncover associations between author team characteristics and appearance in high-impact journals. These results may offer implications for mentoring junior biomedical researchers to publish on high-impact journals, as well as for evaluating academic progress across disciplines in modern academic medical centers. Copyright © 2014 Elsevier Inc. All rights reserved.

  14. Colour change in a structural ornament is related to individual quality, parasites and mating patterns in the blue tit

    Science.gov (United States)

    Badás, E. P.; Martínez, J.; Rivero-de Aguilar, J.; Ponce, C.; Stevens, M.; Merino, S.

    2018-02-01

    Carry-over effects refer to processes that occur in one season and influence fitness in the following. In birds, two costly activities, namely reproduction and moult, are restricted to a small time window, and sometimes overlap. Thus, colour in newly moulted feathers is likely to be affected by the costs of reproduction. Using models of bird vision we investigated male colour change in a free-living population of blue tits ( Cyanistes caeruleus) in three sampling occasions: spring 1, winter and spring 2. We related crown, tail, breast and cheek feather colouration after the moult (winter) to the intensity of infections by blood parasites during reproduction (spring 1). In the following spring (spring 2), we explored mating patterns with respect to changes in feather colour (springs 1 vs. 2). Males that were less intensely infected by the malaria parasite Plasmodium while breeding showed purer white cheek feathers in winter, which may indicate higher feather quality. Increased brightness in the white cheek was associated with better body condition during reproduction. In the following season, males with brighter cheeks paired with females that had noticeably brighter cheek patches compared to the male's previous mate. These results suggest that the conditions experienced during reproduction are likely to affect moult and thus feather colouration, at least in the white patch. High quality individuals may allocate resources efficiently during reproduction increasing future reproductive success through variation in mating patterns. Carry-over effects from reproduction might extend not only to the non-breeding phase, but also to the following breeding season.

  15. A high-fat, high-glycaemic index, low-fibre dietary pattern is prospectively associated with type 2 diabetes in a British birth cohort.

    Science.gov (United States)

    Pastorino, Silvia; Richards, Marcus; Pierce, Mary; Ambrosini, Gina L

    2016-05-01

    The combined association of dietary fat, glycaemic index (GI) and fibre with type 2 diabetes has rarely been investigated. The objective was to examine the relationship between a high-fat, high-GI, low-fibre dietary pattern across adult life and type 2 diabetes risk using reduced rank regression. Data were from the MRC National Survey of Health and Development. Repeated measures of dietary intake estimated using 5-d diet diaries were available at the age of 36, 43 and 53 years for 1180 study members. Associations between dietary pattern scores at each age, as well as longitudinal changes in dietary pattern z-scores, and type 2 diabetes incidence (n 106) from 53 to 60-64 years were analysed. The high-fat, high-GI, low-fibre dietary pattern was characterised by low intakes of fruit, vegetables, low-fat dairy products and whole-grain cereals, and high intakes of white bread, fried potatoes, processed meat and animal fats. There was an increasing trend in OR for type 2 diabetes with increasing quintile of dietary pattern z-scores at the age of 43 years among women but not among men. Women in the highest z-score quintile at the age of 43 years had an OR for type 2 diabetes of 5·45 (95 % CI 2·01, 14·79). Long-term increases in this dietary pattern, independently of BMI and waist circumference, were also detrimental among women: for each 1 sd unit increase in dietary pattern z-score between 36 and 53 years, the OR for type 2 diabetes was 1·67 (95 % CI 1·20, 2·43) independently of changes in BMI and waist circumference in the same periods. A high-fat, high-GI, low-fibre dietary pattern was associated with increased type 2 diabetes risk in middle-aged British women but not in men.

  16. Orchestrated structure evolution: accelerating direct-write nanomanufacturing by combining top-down patterning with bottom-up growth

    Energy Technology Data Exchange (ETDEWEB)

    Kitayaporn, Sathana; Baneyx, Francois; Schwartz, Daniel T [Department of Chemical Engineering, University of Washington, Seattle, WA 98195-1750 (United States); Hoo, Ji Hao; Boehringer, Karl F, E-mail: dts@uw.edu [Department of Electrical Engineering, University of Washington, Seattle, WA 98195-1750 (United States)

    2010-05-14

    Direct-write nanomanufacturing with scanning beams and probes is flexible and can produce high quality products, but it is normally slow and expensive to raster point-by-point over a pattern. We demonstrate the use of an accelerated direct-write nanomanufacturing method called 'orchestrated structure evolution' (OSE), where a direct-write tool patterns a small number of growth 'seeds' that subsequently grow into the final thin film pattern. Through control of seed size and spacing, it is possible to vary the ratio of 'top-down' to 'bottom-up' character of the patterning processes, ranging from conventional top-down raster patterning to nearly pure bottom-up space-filling via seed growth. Electron beam lithography (EBL) and copper electrodeposition were used to demonstrate trade-offs between process time and product quality over nano- to microlength scales. OSE can reduce process times for high-cost EBL patterning by orders of magnitude, at the expense of longer (but inexpensive) copper electrodeposition processing times. We quantify the degradation of pattern quality that accompanies fast OSE patterning by measuring deviations from the desired patterned area and perimeter. We also show that the density of OSE-induced grain boundaries depends upon the seed separation and size. As the seed size is reduced, the uniformity of an OSE film becomes more dependent on details of seed nucleation processes than normally seen for conventionally patterned films.

  17. Patterned magnetic thin films for ultra high density recording

    NARCIS (Netherlands)

    Haast, M.A.M.

    This thesis describes the results of a research project in the field of high bit-density data-storage media. More specifically, the material aspects of the novel recording technique using patterned media have been studied. The aim of the work was the design, realization and characterization of such

  18. Gustatory stimuli representing different perceptual qualities elicit distinct patterns of neuropeptide secretion from taste buds.

    Science.gov (United States)

    Geraedts, Maartje C P; Munger, Steven D

    2013-04-24

    Taste stimuli that evoke different perceptual qualities (e.g., sweet, umami, bitter, sour, salty) are detected by dedicated subpopulations of taste bud cells that use distinct combinations of sensory receptors and transduction molecules. Here, we report that taste stimuli also elicit unique patterns of neuropeptide secretion from taste buds that are correlated with those perceptual qualities. We measured tastant-dependent secretion of glucagon-like peptide-1 (GLP-1), glucagon, and neuropeptide Y (NPY) from circumvallate papillae of Tas1r3(+/+), Tas1r3(+/-) and Tas1r3 (-/-) mice. Isolated tongue epithelia were mounted in modified Ussing chambers, permitting apical stimulation of taste buds; secreted peptides were collected from the basal side and measured by specific ELISAs. Appetitive stimuli (sweet: glucose, sucralose; umami: monosodium glutamate; polysaccharide: Polycose) elicited GLP-1 and NPY secretion and inhibited basal glucagon secretion. Sweet and umami stimuli were ineffective in Tas1r3(-/-) mice, indicating an obligatory role for the T1R3 subunit common to the sweet and umami taste receptors. Polycose responses were unaffected by T1R3 deletion, consistent with the presence of a distinct polysaccharide taste receptor. The effects of sweet stimuli on peptide secretion also required the closing of ATP-sensitive K(+) (KATP) channels, as the KATP channel activator diazoxide inhibited the effects of glucose and sucralose on both GLP-1 and glucagon release. Both sour citric acid and salty NaCl increased NPY secretion but had no effects on GLP-1 or glucagon. Bitter denatonium showed no effects on these peptides. Together, these results suggest that taste stimuli of different perceptual qualities elicit unique patterns of neuropeptide secretion from taste buds.

  19. Impact of land use on urban mobility patterns, emissions and air quality in a Portuguese medium-sized city.

    Science.gov (United States)

    Bandeira, Jorge M; Coelho, Margarida C; Sá, Maria Elisa; Tavares, Richard; Borrego, Carlos

    2011-02-15

    The main objective of this work was to evaluate the impact of urban development trends in mobility patterns of a medium sized Portuguese city and air quality consequences, using a sequential modeling process, comprising i) land use and transportation, TRANUS model; ii) road traffic air pollutants emissions, TREM model and; iii) air quality, TAPM model. This integrated methodology was applied to a medium sized Portuguese city. In order to evaluate the implementation of the methodology, a preliminary study was performed, which consisted on the comparison of modeled mobility patterns and CO and PM(10) concentrations with measured data used in the definition of the current scenario. The comparison between modeled and monitored mobility patterns at the morning peak hour for a weekday showed an RMSE of 31%. Regarding CO concentrations, an underestimation of the modeled results was observed. Nevertheless, the modeled PM(10) concentrations were consistent with the monitored data. Overall, the results showed a reasonable consistency of the modeled data, which allowed the use of the integrated modeling system for the study scenarios. The future scenarios consisted on the definition of different mobility patterns and vehicle technology characteristics, according to two main developing trends: (1) "car pooling" scenario, which imposes a mean occupancy rate of 3 passengers by vehicle and (2) the "Euro 6" scenario, which establishes that all vehicles accomplish at least the Euro 6 standard technology. Reductions of 54% and 83% for CO, 44% and 95% for PM(10), 44% and 87% for VOC and 44% and 79% for NO(x) emissions were observed in scenarios 1 and 2, respectively. Concerning air quality, a reduction of about 100 μg m(-3) of CO annual average concentration was observed in both scenarios. The results of PM(10) annual concentrations showed a reduction of 1.35 μg m(-3) and 2.7 μg m(-3) for scenarios 1 and 2 respectively. Copyright © 2010 Elsevier B.V. All rights reserved.

  20. Real-World Solutions for Developing High-Quality PHP Frameworks and Applications

    CERN Document Server

    Bergmann, Sebastian

    2011-01-01

    Learn to develop high-quality applications and frameworks in PHP Packed with in-depth information and step-by-step guidance, this book escorts you through the process of creating, maintaining and extending sustainable software of high quality with PHP. World-renowned PHP experts present real-world case studies for developing high-quality applications and frameworks in PHP that can easily be adapted to changing business requirements. . They offer different approaches to solving  typical development and quality assurance problems that every developer needs to know and master.Details the process

  1. Directly patternable high refractive index ferroelectric sol–gel resist

    Energy Technology Data Exchange (ETDEWEB)

    Garoli, D., E-mail: denis.garoli@iit.it [Istituto Italiano di Tecnologia, Via Morego 16, 16136 Genova (Italy); Della Giustina, G. [Industrial Engineering Department, University of Padova and INSTM, Via Marzolo 9, 35131 Padova (Italy)

    2015-08-15

    The development of a ferroelectric negative tone sol–gel resist for Ultraviolet (UV) and Electron Beam (EB) lithography is presented. A new system based on Lead Zirconate Titanate (PZT, with formula PbZr{sub 0.52}Ti{sub 0.48}O{sub 3}) was synthesized by sol–gel method. The lithographic performances were investigated and several structures spanning from the micron range down to less than 50 nm have been achieved by UV and EB lithography. The system interaction with UV light and Electron beam was thoroughly characterized by FT-IT spectroscopy. The exposed PZT was annealed at high temperatures in order to study the crystalline phase evolution, the optical constants values and stability of patterned structures. After exposure and annealing, the refractive index of the material can vary from 1.68 up to 2.33 (@400 nm), while the ferroelectric behaviour seems to be maintained after high temperature annealing. These results suggest a possible application of PZT resist not only as ferroelectric but also as nanopatternable high refractive index material. Moreover, direct nanopatterning by means of Focused Ion Beam (FIB) lithography was verified and the potentiality for the preparation of high aspect ratio hollow nanostructures will be presented. - Highlights: • A new formula directly patternable PZT high refractive index resist is presented. • The gel is sensitive to both UV and electron beam exposure. • The refractive index can vary from 1.68 up to 2.33 (@400 nm). • Direct nanopatterning by means of Focused Ion Beam (FIB) lithography was verified. • High aspect ratio hollow nanostructures will be presented.

  2. Exploring the Pattern of Internal Communication in Total Quality Management Implementation in Manufacturing Companies

    Directory of Open Access Journals (Sweden)

    Samsudin Sharina

    2017-01-01

    Full Text Available Communication is an important aspect of organizational dynamic process and it is irrefutable one of the critical success factors of the Total Quality Management (TQM implementation. Although there are increasing awareness concerning the importance of internal organizational communication, knowledge appears to have rarely translated into practice or there is lack of guidance to effectively practicing it. Therefore, a study was proposed to investigate the pattern of internal communication practice in TQM implementation. This paper concerns on focusing into internal communication practices in TQM implementation factors and the communication patterns in terms of message forms and mediums of communication to convey TQM messages. Reliability and Factor analysis were carried out to confirm items that form each factor in internal communication in TQM implementation. Based on the analysis of survey questionnaires distributed to 104 large manufacturing companies implementing TQM in Malaysia, it was found that there are certain communication patterns practice by the management when conveying and disseminating TQM messages, but they have no specific guidelines. Therefore, the internal communication practices are not well planned. Finally, it is suggested that further research should be carried out to explain clearly the role and strategy of communication on this issue in order to boost the success of TQM implementation particularly in manufacturing company.

  3. Patterning crystalline indium tin oxide by high repetition rate femtosecond laser-induced crystallization

    International Nuclear Information System (INIS)

    Cheng, Chung-Wei; Lin, Cen-Ying; Shen, Wei-Chih; Lee, Yi-Ju; Chen, Jenq-Shyong

    2010-01-01

    A method is proposed for patterning crystalline indium tin oxide (c-ITO) patterns on amorphous ITO (a-ITO) thin films by femtosecond laser irradiation at 80 MHz repetition rate followed by chemical etching. In the proposed approach, the a-ITO film is transformed into a c-ITO film over a predetermined area via the heat accumulation energy supplied by the high repetition rate laser beam, and the unirradiated a-ITO film is then removed using an acidic etchant solution. The fabricated c-ITO patterns are observed using scanning electron microscopy and cross-sectional transmission electron microscopy. The crystalline, optical, electrical properties were measured by X-ray diffraction, spectrophotometer, and four point probe station, respectively. The experimental results show that a high repetition rate reduces thermal shock and yields a corresponding improvement in the surface properties of the c-ITO patterns.

  4. The perception of lexical stress in German: effects of segmental duration and vowel quality in different prosodic patterns.

    Science.gov (United States)

    Kohler, Klaus J

    2012-01-01

    Several decades of research, focusing on English, Dutch and German, have set up a hierarchy of acoustic properties for cueing lexical stress. It attributes the strongest cue to criterial-level f0 change, followed by duration, but low weight to energy and to stressed-vowel spectra. This paper re-examines the established view with new data from German. In the natural productions of the German word pair Kaffee 'coffee' - Café 'locality' (with initial vs. final stress in a North German pronunciation), vowel duration was manipulated in a complementary fashion across the two syllables in five steps, spanning the continuum from initial to final stress on each word. The two base words provided different vowel qualities as the second variable, the intervocalic fricative was varied in two values, long and short, taken from Café and Kaffee, and the generated test words were inserted in a low f0 tail and in a high f0 hat-pattern plateau, which both eliminated f0 change as a cue to lexical stress. The sentence stimuli were judged in two listening experiments by 16 listeners in each as to whether the first or the second syllable of the test word was stressed. The results show highly significant effects of vowel duration, vowel quality and fricative duration. The combined vowel-quality and fricative variable can outweigh vowel duration as a cue to lexical stress. The effect of the prosodic frame is only marginal, especially related to a rhythmic factor. The paper concludes that there is no general hierarchy with a fixed ranking of the variables traditionally adduced to signal lexical stress. Every prosodic embedding of segmental sequences defines the hierarchy afresh. Copyright © 2012 S. Karger AG, Basel.

  5. High-speed classification of coherent X-ray diffraction patterns on the K computer for high-resolution single biomolecule imaging

    Energy Technology Data Exchange (ETDEWEB)

    Tokuhisa, Atsushi [RIKEN SPring-8 Center, 1-1-1 Kouto, Sayo-cho, Sayo-gun, Hyogo 679-5148 (Japan); Arai, Junya [The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-0033 (Japan); Joti, Yasumasa [JASRI, 1-1-1 Kouto, Sayo-cho, Sayo-gun, Hyogo 679-5198 (Japan); Ohno, Yoshiyuki; Kameyama, Toyohisa; Yamamoto, Keiji; Hatanaka, Masayuki; Gerofi, Balazs; Shimada, Akio; Kurokawa, Motoyoshi; Shoji, Fumiyoshi [RIKEN Advanced Institute for Computational Science, 7-1-26 Minatojima-minami-machi, Chuo-ku, Kobe, Hyogo 650-0047 (Japan); Okada, Kensuke [RIKEN SPring-8 Center, 1-1-1 Kouto, Sayo-cho, Sayo-gun, Hyogo 679-5148 (Japan); Sugimoto, Takashi [JASRI, 1-1-1 Kouto, Sayo-cho, Sayo-gun, Hyogo 679-5198 (Japan); Yamaga, Mitsuhiro; Tanaka, Ryotaro [RIKEN SPring-8 Center, 1-1-1 Kouto, Sayo-cho, Sayo-gun, Hyogo 679-5148 (Japan); Yokokawa, Mitsuo; Hori, Atsushi [RIKEN Advanced Institute for Computational Science, 7-1-26 Minatojima-minami-machi, Chuo-ku, Kobe, Hyogo 650-0047 (Japan); Ishikawa, Yutaka, E-mail: ishikawa@is.s.u-tokyo.ac.jp [The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-0033 (Japan); Hatsui, Takaki, E-mail: ishikawa@is.s.u-tokyo.ac.jp [RIKEN SPring-8 Center, 1-1-1 Kouto, Sayo-cho, Sayo-gun, Hyogo 679-5148 (Japan); Go, Nobuhiro [Japan Atomic Energy Agency, 8-1-7 Umemidai, Kizugawa, Kyoto 619-0215 (Japan)

    2013-11-01

    A code with an algorithm for high-speed classification of X-ray diffraction patterns has been developed. Results obtained for a set of 1 × 10{sup 6} simulated diffraction patterns are also reported. Single-particle coherent X-ray diffraction imaging using an X-ray free-electron laser has the potential to reveal the three-dimensional structure of a biological supra-molecule at sub-nanometer resolution. In order to realise this method, it is necessary to analyze as many as 1 × 10{sup 6} noisy X-ray diffraction patterns, each for an unknown random target orientation. To cope with the severe quantum noise, patterns need to be classified according to their similarities and average similar patterns to improve the signal-to-noise ratio. A high-speed scalable scheme has been developed to carry out classification on the K computer, a 10PFLOPS supercomputer at RIKEN Advanced Institute for Computational Science. It is designed to work on the real-time basis with the experimental diffraction pattern collection at the X-ray free-electron laser facility SACLA so that the result of classification can be feedback for optimizing experimental parameters during the experiment. The present status of our effort developing the system and also a result of application to a set of simulated diffraction patterns is reported. About 1 × 10{sup 6} diffraction patterns were successfully classificatied by running 255 separate 1 h jobs in 385-node mode.

  6. Blueprint for action: steps toward a high-quality, high-value maternity care system.

    Science.gov (United States)

    Angood, Peter B; Armstrong, Elizabeth Mitchell; Ashton, Diane; Burstin, Helen; Corry, Maureen P; Delbanco, Suzanne F; Fildes, Barbara; Fox, Daniel M; Gluck, Paul A; Gullo, Sue Leavitt; Howes, Joanne; Jolivet, R Rima; Laube, Douglas W; Lynne, Donna; Main, Elliott; Markus, Anne Rossier; Mayberry, Linda; Mitchell, Lynn V; Ness, Debra L; Nuzum, Rachel; Quinlan, Jeffrey D; Sakala, Carol; Salganicoff, Alina

    2010-01-01

    Childbirth Connection hosted a 90th Anniversary national policy symposium, Transforming Maternity Care: A High Value Proposition, on April 3, 2009, in Washington, DC. Over 100 leaders from across the range of stakeholder perspectives were actively engaged in the symposium work to improve the quality and value of U.S. maternity care through broad system improvement. A multi-disciplinary symposium steering committee guided the strategy from its inception and contributed to every phase of the project. The "Blueprint for Action: Steps Toward a High Quality, High Value Maternity Care System", issued by the Transforming Maternity Care Symposium Steering Committee, answers the fundamental question, "Who needs to do what, to, for, and with whom to improve the quality of maternity care over the next five years?" Five stakeholder workgroups collaborated to propose actionable strategies in 11 critical focus areas for moving expeditiously toward the realization of the long term "2020 Vision for a High Quality, High Value Maternity Care System", also published in this issue. Following the symposium these workgroup reports and recommendations were synthesized into the current blueprint. For each critical focus area, the "Blueprint for Action" presents a brief problem statement, a set of system goals for improvement in that area, and major recommendations with proposed action steps to achieve them. This process created a clear sightline to action that if enacted could improve the structure, process, experiences of care, and outcomes of the maternity care system in ways that when anchored in the culture can indeed transform maternity care. Copyright 2010 Jacobs Institute of Women

  7. High-resolution patterning of silver conductive lines by adhesion contrast planography

    International Nuclear Information System (INIS)

    Kusaka, Yasuyuki; Ushijima, Hirobumi; Koutake, Masayoshi

    2015-01-01

    We developed printed electronics compatible planographic printing methods that enable single-micrometer-order patterning with high rectangularity and thickness uniformity. Instead of conventional planographic printing methods where selective wetting is used for pattern generation, an adhesive latent image produced on a silicone surface is exploited for patterning in the proposed printing methodologies. We further investigated the fundamental mechanisms of the proposed methods by focusing on adhesion contrasts between the blanket, printing area, and non-printing area of a printing plate (PP) and determined that printing is feasible when a simple magnitude relation of adhesions is satisfied for thin layers of size ranging from approximately 50 nm to 100 nm. Latent image formation can be carried out via a simple ultraviolet exposure of the silicone surface, thereby enabling the rapid prototyping of printed device fabrications. The easily preparable, single material-based flat PPs developed in this study have the advantages of flexibility in pattern designs, washing process, fabrication cost, and pattern-rewriting capability compared with the conventional printing methods in which raised surfaces such as stamps or clichés are required for patterning. (paper)

  8. High-speed scanning stroboscopic fringe-pattern projection technology for three-dimensional shape precision measurement.

    Science.gov (United States)

    Yang, Guowei; Sun, Changku; Wang, Peng; Xu, Yixin

    2014-01-10

    A high-speed scanning stroboscopic fringe-pattern projection system is designed. A high-speed rotating polygon mirror and a line-structured laser cooperate to produce stable and unambiguous stroboscopic fringe patterns. The system combines the rapidity of the grating projection with the high accuracy of the line-structured laser light source. The fringe patterns have fast frame rate, great density, high precision, and high brightness, with convenience and accuracy in adjusting brightness, frequency, linewidth, and the amount of phase shift. The characteristics and the stability of this system are verified by experiments. Experimental results show that the finest linewidth can reach 40 μm and that the minimum fringe cycle is 80 μm. Circuit modulation makes the light source system flexibly adjustable, easy to control in real time, and convenient to project various fringe patterns. Combined with different light intensity adjustment algorithms and 3D computation models, the 3D topography with high accuracy can be obtained for objects measured under different environments or objects with different sizes, morphologies, and optical properties. The proposed system shows a broad application prospect for fast 3D shape precision measurements, particularly in the industrial field of 3D online detection for precision devices.

  9. Chemical mechanical polishing of BTO thin film for vertical sidewall patterning of high-density memory capacitor

    International Nuclear Information System (INIS)

    Kim, Nam-Hoon; Ko, Pil-Ju; Seo, Yong-Jin; Lee, Woo-Sun

    2006-01-01

    Most high-k materials cannot to be etched easily. Problems such as low etch rate, poor sidewall angle, plasma damage, and process complexity have emerged in high-density DRAM fabrication. Chemical mechanical polishing (CMP) by the damascene process has been used to pattern high-k materials for high-density capacitor. Barium titanate (BTO) thin film, a typical high-k material, was polished with three types of silica slurry having different pH values. Sufficient removal rate with adequate selectivity to realize the pattern mask of tetra-ethyl ortho-silicate (TEOS) film for the vertical sidewall angle was obtained. The changes of X-ray diffraction pattern and dielectric constant by CMP process were negligible. Planarization was also achieved for the subsequent multilevel processes. Our new CMP approach will provide a guideline for effective patterning of high-k materials by CMP

  10. Soil cover patterns influence on the land environmental functions, agroecological quality, land-use and monitoring efficiency in the Central Russia

    Science.gov (United States)

    Vasenev, Ivan; Yashin, Ivan; Lukin, Sergey; Valentini, Riccardo

    2015-04-01

    First decades of XXI century actualized for soil researches the principal methodical problem of most modern geosciences: what spatial and temporal scale would be optimal for land quality evaluation and land-use practice optimizing? It is becoming obvious that this question cannot have one solution and have to be solved with especial attention on the features of concrete region and landscape, land-use history and practical issues, land current state and environmental functions, soil cover patterns and variability, governmental requirements and local society needs, best available technologies and their potential profitability. Central Russia is one of the most dynamical economic regions with naturally high and man-made complicated landscape and soil cover variability, long-term land-use history and self-contradictory issues, high potential of profitable farming and increased risks of land degradation. Global climate and technological changes essentially complicate the originally high and sharply increased in XX century farming land heterogeneity in the Central Russia that actualizes system analysis of its zonal, intra-zonal and azonal soil cover patterns according to their influence on land environmental functions, agroecological quality, and land-use and monitoring efficiency variability. Developed by the Laboratory of agroecological monitoring, ecosystem modeling & prediction (LAMP / RTSAU with support of RF Governmental projects #11.G34.31.0079 and #14.120.14.4266) regional systems of greenhouse gases environmental monitoring RusFluxNet (6 fixed & 1 mobile eddy covariance stations with zonal functional sets of key plots with chamber investigations in 5 Russian regions) and of agroecological monitoring (in representative key plots with different farming practice in 9 RF regions) allow to do this analysis in frame of enough representative regional multi-factorial matrix of soil cover patterns, bioclimatic conditions, landscape features, and land-use history and

  11. Adoption and impact of high quality bambara flour (HQBF ...

    African Journals Online (AJOL)

    Adoption and impact of high quality bambara flour (HQBF) technology in the ... consumer acceptability/quality of products, credit, availability of raw materials, and ... as a result of 12.5 per cent increase in demand for bambara-based products.

  12. Development of a high-quality cut-off wall using electrophoresis

    International Nuclear Information System (INIS)

    Kawachi, T.; Murahashi, H.

    1991-01-01

    Techniques to build a high-quality cut-off wall have been developed for storage facilities of low-level radioactive waste (LLW) as an emergency measures to prevent leakages. The cut-off wall is highly impermeable, nucleid-adsorptive and have long-term durability. Electrophoresis is used to form impermeable membrane of bentonite as main features of the cut-off wall. First of all, laboratory tests have been conducted to study ways of building barriers on site and to collect data on the barriers properties. Afterwards, on-site construction tests of a high-quality cut-off wall have been carried out. In this paper, we describe the process and results on the studies of the high-quality cut-off wall using electrophoresis

  13. Timing of high-quality child care and cognitive, language, and preacademic development.

    Science.gov (United States)

    Li, Weilin; Farkas, George; Duncan, Greg J; Burchinal, Margaret R; Vandell, Deborah Lowe

    2013-08-01

    The effects of high- versus low-quality child care during 2 developmental periods (infant-toddlerhood and preschool) were examined using data from the National Institute of Child Health and Human Development Study of Early Child Care. Propensity score matching was used to account for differences in families who used different combinations of child care quality during the 2 developmental periods. Findings indicated that cognitive, language, and preacademic skills prior to school entry were highest among children who experienced high-quality care in both the infant-toddler and preschool periods, somewhat lower among children who experienced high-quality child care during only 1 of these periods, and lowest among children who experienced low-quality care during both periods. Irrespective of the care received during infancy-toddlerhood, high-quality preschool care was related to better language and preacademic outcomes at the end of the preschool period; high-quality infant-toddler care, irrespective of preschool care, was related to better memory skills at the end of the preschool period. (PsycINFO Database Record (c) 2013 APA, all rights reserved).

  14. Health-Related Quality of Life in Children with High-Functioning Autism

    Science.gov (United States)

    Potvin, Marie-Christine; Snider, Laurie; Prelock, Patricia A.; Wood-Dauphinee, Sharon; Kehayia, Eva

    2015-01-01

    The health-related quality of life of school-aged children with high-functioning autism is poorly understood. The objectives of this study were to compare the health-related quality of life of children with high-functioning autism to that of typically developing peers and to compare child-self and parent-proxy reports of health-related quality of…

  15. High quality digital holographic reconstruction on analog film

    Science.gov (United States)

    Nelsen, B.; Hartmann, P.

    2017-05-01

    High quality real-time digital holographic reconstruction, i.e. at 30 Hz frame rates, has been at the forefront of research and has been hailed as the holy grail of display systems. While these efforts have produced a fascinating array of computer algorithms and technology, many applications of reconstructing high quality digital holograms do not require such high frame rates. In fact, applications such as 3D holographic lithography even require a stationary mask. Typical devices used for digital hologram reconstruction are based on spatial-light-modulator technology and this technology is great for reconstructing arbitrary holograms on the fly; however, it lacks the high spatial resolution achievable by its analog counterpart, holographic film. Analog holographic film is therefore the method of choice for reconstructing highquality static holograms. The challenge lies in taking a static, high-quality digitally calculated hologram and effectively writing it to holographic film. We have developed a theoretical system based on a tunable phase plate, an intensity adjustable high-coherence laser and a slip-stick based piezo rotation stage to effectively produce a digitally calculated hologram on analog film. The configuration reproduces the individual components, both the amplitude and phase, of the hologram in the Fourier domain. These Fourier components are then individually written on the holographic film after interfering with a reference beam. The system is analogous to writing angularly multiplexed plane waves with individual component phase control.

  16. Sleep Patterns in Adults with a Diagnosis of High-Functioning Autism Spectrum Disorder.

    Science.gov (United States)

    Baker, Emma K; Richdale, Amanda L

    2015-11-01

    To examine sleep patterns and sleep problems and their relationship with daytime functioning in adults with a diagnosis of an autism spectrum disorder and no comorbid intellectual disability (high-functioning autism spectrum disorder [HFASD]) compared to neurotypical (NT) adults. Cross-sectional. Home-based study. 36 adults with HFASD and 36 age-, intelligence quotient- and sex-matched NT adults. Participants completed an online questionnaire battery including the Pittsburgh Sleep Quality Index (PSQI), a 14-d sleep wake diary and 14-d actigraphy data collection. Adults with HFASD had significantly more general sleep disturbances and higher scores on the PSQI, longer sleep onset latencies (actigraphy), and poorer sleep efficiency (diary) and these results remained significant after accounting for the False Discovery Rate. Those adults with HFASD who did not have a comorbid diagnosis of anxiety/depression had significantly shorter total sleep time (diary and actigraphy) compared to NT adults. Compared to NT adults, the HFASD group self-reported significantly poorer refreshment scores upon waking in the morning and higher scores on the daytime dysfunction due to sleepiness subscale of the PSQI. These findings support the notion that problems related to sleep, in particular insomnia, continue into adulthood in individuals with high-functioning autism spectrum disorder. © 2015 Associated Professional Sleep Societies, LLC.

  17. Pattern transition between periodic Liesegang pattern and crystal growth regime in reaction-diffusion systems

    Science.gov (United States)

    Lagzi, István; Ueyama, Daishin

    2009-01-01

    The pattern transition between periodic precipitation pattern formation (Liesegang phenomenon) and pure crystal growth regimes is investigated in silver nitrate and potassium dichromate system in mixed agarose-gelatin gel. Morphologically different patterns were found depending on the quality of the gel, and transition between these typical patterns can be controlled by the concentration of gelatin in mixed gel. Effect of temperature and hydrodynamic force on precipitation pattern structure was also investigated.

  18. Stochastic optimization of loading pattern for PWR

    International Nuclear Information System (INIS)

    Smuc, T.; Pevec, D.

    1994-01-01

    The application of stochastic optimization methods in solving in-core fuel management problems is restrained by the need for a large number of proposed solutions loading patterns, if a high quality final solution is wanted. Proposed loading patterns have to be evaluated by core neutronics simulator, which can impose unrealistic computer time requirements. A new loading pattern optimization code Monte Carlo Loading Pattern Search has been developed by coupling the simulated annealing optimization algorithm with a fast one-and-a-half dimensional core depletion simulator. The structure of the optimization method provides more efficient performance and allows the user to empty precious experience in the search process, thus reducing the search space size. Hereinafter, we discuss the characteristics of the method and illustrate them on the results obtained by solving the PWR reload problem. (authors). 7 refs., 1 tab., 1 fig

  19. Low-grade squamous intraepithelial lesion, cannot exclude high-grade squamous intraepithelial lesion: a category with an increased outcome of high-grade lesions: use as a quality assurance measure.

    Science.gov (United States)

    Nishino, Ha T; Wilbur, David C; Tambouret, Rosemary H

    2012-08-01

    "Low-grade squamous intraepithelial lesion (LSIL), cannot exclude high-grade squamous intraepithelial lesion" (LSIL-H) is an increasingly used, equivocal interpretive category in gynecologic cytology. In an effort to evaluate its potential usefulness as a measure of quality assurance, we studied patterns of use of the LSIL-H diagnosis compared with "LSIL" and "high-grade squamous intraepithelial lesion" (HSIL) with corresponding histologic outcomes for 10 cytopathologists in our practice. In our laboratory, while the overall rate of associated cervical intraepithelial neoplasia 2 or greater on histologic follow-up for LSIL-H was intermediate between that of LSIL and HSIL, the outcomes for individual cytopathologists varied widely. Monitoring this particular utilization-outcome data with periodic confidential feedback to individual cytopathologists offers an opportunity for practice improvement within a laboratory and serves as an additional measure of quality assurance. These data may be useful for establishing and/or realigning the diagnostic criteria for this equivocal cytologic interpretation endorsed by a pathology practice.

  20. Smoking and high-risk mammographic parenchymal patterns: a case-control study

    International Nuclear Information System (INIS)

    Sala, Evis; Warren, Ruth; McCann, Jenny; Duffy, Stephen; Luben, Robert; Day, Nicholas

    2000-01-01

    Current smoking was strongly and inversely associated with high-risk patterns, after adjustment for concomitant risk factors. Relative to never smokers, current smokers were significantly less likely to have a high-risk pattern. Similar results were obtained when the analysis was confined to postmenopausal women. Past smoking was not related to the mammographic parenchymal patterns. The overall effect in postmenopausal women lost its significance when adjusted for other risk factors for P2/DY patterns that were found to be significant in the present study, although the results are still strongly suggestive. The present data indicate that adjustment for current smoking status is important when evaluating the relationship between mammographic parenchymal pattern and breast cancer risk. They also indicate that smoking is a prominent potential confounder when analyzing effects of other risk factors such as obesity-related variables. It appears that parenchymal patterns may act as an informative biomarker of the effect of cigarette smoking on breast cancer risk. Overall, epidemiological studies [1,2,3,4] have reported no substantial association between cigarette smoking and the risk of breast cancer. Some studies [5,6,7] reported a significant increase of breast cancer risk among smokers. In recent studies that addressed the association between breast cancer and cigarette smoking, however, there was some suggestion of a decreased risk [8,9,10], especially among current smokers, ranging from approximately 10 to 30% [9,10]. Brunet et al [11] reported that smoking might reduce the risk of breast cancer by 44% in carriers of BRCA1 or BRCA2 gene mutations. Wolfe [12] described four different mammographic patterns created by variations in the relative amounts of fat, epithelial and connective tissue in the breast, designated N1, P1, P2 and DY. Women with either P2 or DY pattern are considered at greater risk for breast cancer than those with N1 or P1 pattern [12

  1. Nutritional quality and patterns of lunch menus at child care centers in South Korea and Japan.

    Science.gov (United States)

    Kwon, Sooyoun; Yeoh, Yoonjae; Abe, Satoko

    2018-01-01

    This study aimed to investigate the nutritional quality and patterns of lunch menus provided by child care centers in South Korea and Japan. The weekly lunch menus from Monday to Saturday that child care centers provided in November 2014 in South Korea and Japan were analyzed. For Korea, a total of 72 meals provided by 12 centers in Seoul were analyzed by referring to the homepage of the Center for Children's Foodservice Management, which serviced menus for child care centers. For Japan, a total of 30 meals provided by 5 child care centers in Tokyo were analyzed. Nutrient content and pattern in lunch menus were evaluated. The lunch menus in Korea and Japan provided 359.5 kcal (25.7% of the estimated energy requirement) and 376.3 kcal (29.5% of the estimated energy requirement), respectively. 'Rice + Soup + Main dish + Side dish I + Side dish II' were provided in 66.7% of meals in Korea, while various patterns with rice and soup as their bases were provided in Japan. The lunch menus of child care centers in Korea and Japan provide similar amounts of energy, protein, carbohydrate, vitamin A, calcium, and other nutrients. However, there were significant differences in the lunch menu patterns in Korea and Japan. This study provides information about the nutritional content and pattern of lunch menus at child care centers in Asian countries with rice as a staple food.

  2. Consistently high sports/exercise activity is associated with better sleep quality, continuity and depth in midlife women: the SWAN sleep study.

    Science.gov (United States)

    Kline, Christopher E; Irish, Leah A; Krafty, Robert T; Sternfeld, Barbara; Kravitz, Howard M; Buysse, Daniel J; Bromberger, Joyce T; Dugan, Sheila A; Hall, Martica H

    2013-09-01

    To examine relationships between different physical activity (PA) domains and sleep, and the influence of consistent PA on sleep, in midlife women. Cross-sectional. Community-based. 339 women in the Study of Women's Health Across the Nation Sleep Study (52.1 ± 2.1 y). None. Sleep was examined using questionnaires, diaries and in-home polysomnography (PSG). PA was assessed in three domains (Active Living, Household/Caregiving, Sports/Exercise) using the Kaiser Physical Activity Survey (KPAS) up to 4 times over 6 years preceding the sleep assessments. The association between recent PA and sleep was evaluated using KPAS scores immediately preceding the sleep assessments. The association between the historical PA pattern and sleep was examined by categorizing PA in each KPAS domain according to its pattern over the 6 years preceding sleep assessments (consistently low, inconsistent/consistently moderate, or consistently high). Greater recent Sports/Exercise activity was associated with better sleep quality (diary "restedness" [P sleep continuity (diary sleep efficiency [SE; P = 0.02]) and depth (higher NREM delta electroencephalographic [EEG] power [P = 0.04], lower NREM beta EEG power [P Sports/Exercise activity was also associated with better Pittsburgh Sleep Quality Index scores (P = 0.02) and higher PSG-assessed SE (P sleep and Active Living or Household/Caregiving activity (either recent or historical pattern) were noted. Consistently high levels of recreational physical activity, but not lifestyle- or household-related activity, are associated with better sleep in midlife women. Increasing recreational physical activity early in midlife may protect against sleep disturbance in this population.

  3. Seasonal patterns in reproductive success of temperate-breeding birds: Experimental tests of the date and quality hypotheses.

    Science.gov (United States)

    Harriman, Vanessa B; Dawson, Russell D; Bortolotti, Lauren E; Clark, Robert G

    2017-04-01

    For organisms in seasonal environments, individuals that breed earlier in the season regularly attain higher fitness than their late-breeding counterparts. Two primary hypotheses have been proposed to explain these patterns: The quality hypothesis contends that early breeders are of better phenotypic quality or breed on higher quality territories, whereas the date hypothesis predicts that seasonally declining reproductive success is a response to a seasonal deterioration in environmental quality. In birds, food availability is thought to drive deteriorating environmental conditions, but few experimental studies have demonstrated its importance while also controlling for parental quality. We tested predictions of the date hypothesis in tree swallows ( Tachycineta bicolor ) over two breeding seasons and in two locations within their breeding range in Canada. Nests were paired by clutch initiation date to control for parental quality, and we delayed the hatching date of one nest within each pair. Subsequently, brood sizes were manipulated to mimic changes in per capita food abundance, and we examined the effects of manipulations, as well as indices of environmental and parental quality, on nestling quality, fledging success, and return rates. Reduced reproductive success of late-breeding individuals was causally related to a seasonal decline in environmental quality. Declining insect biomass and enlarged brood sizes resulted in nestlings that were lighter, in poorer body condition, structurally smaller, had shorter and slower growing flight feathers and were less likely to survive to fledge. Our results provide evidence for the importance of food resources in mediating seasonal declines in offspring quality and survival.

  4. Moulting patterns of Alabio and Mojosari ducks and their relation on blood lipids (tryglycerides, egg production and egg quality

    Directory of Open Access Journals (Sweden)

    Maijon Purba

    2005-06-01

    Full Text Available Moulting is a biological condition that can happen in poultry. It is resulted from the complex interaction which involves the function of thyroxine hormone. Moulting can reduce or even stop the egg production. A study was conducted to observe the moulting patterns of local ducks (Alabio and Mojosari and to determine the relation of moulting with blood lipids (triglycerides, egg production and quality. Each breed consisted of ten female dukcs were observed for moulting pattern, blood triglycerides, egg production and quality. Fourty ducks were used for simulation of egg production. Data from moulting patterns,egg production and quality were analyzed using t-based on Least Square means with Statistical Analysis System. The relation of breeds and moulting patterns with triglycerides were analyzed using Analysis of Variance (ANOVA for a completely randomized design in a factorial arrangement of 2x2. The main factor was kind of breeds, while the subfactor was the period of moulting, before and during moulting. There were not interaction in every variables between both factors. The average moulting periode of Alabio was significantly (P<0.05 shorter than that of Mojosari (69 vs 76 days. There were 40% of Alabio ducks moulting for 61-70 days, while 40% of Mojosari ducks moulting for 71-80 days. Egg production of Alabio ducks before and after moulting were higher than those Mojosari ducks. The triglycerides content of Alabio and Mojosari ducks was decreased during moulting, in Alabio ducks they were 32.02 and 27.64 μg/ml before and during moulting, while in Mojosari ducks they were 32.83 and 29.32 μg/ml respectively. Egg weight, albumin weight, yolk weight, and haugh unit of the two breeds increased after moulting, while yolk colour decreased. The average yolk colour of Alabio ducks before and after moulting were 6.90 and 5.11, while in Mojosari ducks they were 7.90 and 4.60 respectively.

  5. Electrode patterning of ITO thin films by high repetition rate fiber laser

    International Nuclear Information System (INIS)

    Lin, H.K.; Hsu, W.C.

    2014-01-01

    Indium tin oxide (ITO) thin films are deposited on glass substrates using a radio frequency magnetron sputtering system. As-deposited ITO thin film was 100 nm in thickness and a transmittance of ITO film on glass substrate was 79% at 550 nm. Conductive electrodes are then patterned on the ITO films using a high repetition rate fiber laser system followed by a wet chemical etching process. The electrical, optical and structural properties of the patterned samples are evaluated by means of a four-point probe technique, spectrophotometer, X-ray diffraction (XRD), scanning electron microscopy (SEM) and atomic force microscopy (AFM). The results show that the samples annealed with a pulse repetition rate of 150 kHz or 400 kHz have a low sheet resistivity of 21 Ω/□ and a high optical transmittance of 90%. In addition, it is shown that a higher pulse repetition rate reduces both the residual stress and the surface roughness of the patterned specimens. Therefore, the present results suggest that a pulse repetition rate of 400 kHz represents the optimal processing condition for the patterning of crack-free ITO-coated glass substrates with good electrical and optical properties.

  6. Electrode patterning of ITO thin films by high repetition rate fiber laser

    Energy Technology Data Exchange (ETDEWEB)

    Lin, H.K., E-mail: HKLin@mail.npust.edu.tw; Hsu, W.C.

    2014-07-01

    Indium tin oxide (ITO) thin films are deposited on glass substrates using a radio frequency magnetron sputtering system. As-deposited ITO thin film was 100 nm in thickness and a transmittance of ITO film on glass substrate was 79% at 550 nm. Conductive electrodes are then patterned on the ITO films using a high repetition rate fiber laser system followed by a wet chemical etching process. The electrical, optical and structural properties of the patterned samples are evaluated by means of a four-point probe technique, spectrophotometer, X-ray diffraction (XRD), scanning electron microscopy (SEM) and atomic force microscopy (AFM). The results show that the samples annealed with a pulse repetition rate of 150 kHz or 400 kHz have a low sheet resistivity of 21 Ω/□ and a high optical transmittance of 90%. In addition, it is shown that a higher pulse repetition rate reduces both the residual stress and the surface roughness of the patterned specimens. Therefore, the present results suggest that a pulse repetition rate of 400 kHz represents the optimal processing condition for the patterning of crack-free ITO-coated glass substrates with good electrical and optical properties.

  7. Texture Based Quality Analysis of Simulated Synthetic Ultrasound Images Using Local Binary Patterns

    Directory of Open Access Journals (Sweden)

    Prerna Singh

    2017-12-01

    Full Text Available Speckle noise reduction is an important area of research in the field of ultrasound image processing. Several algorithms for speckle noise characterization and analysis have been recently proposed in the area. Synthetic ultrasound images can play a key role in noise evaluation methods as they can be used to generate a variety of speckle noise models under different interpolation and sampling schemes, and can also provide valuable ground truth data for estimating the accuracy of the chosen methods. However, not much work has been done in the area of modeling synthetic ultrasound images, and in simulating speckle noise generation to get images that are as close as possible to real ultrasound images. An important aspect of simulated synthetic ultrasound images is the requirement for extensive quality assessment for ensuring that they have the texture characteristics and gray-tone features of real images. This paper presents texture feature analysis of synthetic ultrasound images using local binary patterns (LBP and demonstrates the usefulness of a set of LBP features for image quality assessment. Experimental results presented in the paper clearly show how these features could provide an accurate quality metric that correlates very well with subjective evaluations performed by clinical experts.

  8. Effects of parent-child affective quality during high school years on subsequent substance use.

    Directory of Open Access Journals (Sweden)

    Ekaterina S. Ralston

    2012-04-01

    Full Text Available The literature indicates that the quality of affective relationships between youth and parents is associated with lower levels of a range of problem behaviors during childhood, early and late adolescence. While the protective effect of parental monitoring on substance use in the high school and post high school years has been demonstrated, there is a knowledge gap concerning effects of parent-child affective quality (PCAQ during the same periods. We tested a conceptual theoretical model to examine the effects of PCAQ on substance use following high school. The sample was from a RCT that assessed adolescents in rural Iowa from the seventh grade through two years after high school (N=456. We specified direct effects of PCAQ in 12th grade on drunkenness, smoking and illicit drug use during the two years immediately following high school graduation. We also specified the effects of early substance use initiation (alcohol, tobacco and marijuana use reported at baseline on later use. The direct effect of PCAQ in 12th grade on substance use was significant for all substances during at least one of the two years past graduation (ypg. Results were: drunkenness 1 ypg, β=-.126, p<.05; smoking 1 ypg, β=-.119, p<.05; 2 ypg, β=-.146, p<.05; illicit drug use 2 ypg, β=-.165, p<.05. Some significant indirect effects of PCAQ at baseline, via PCAQ at 12th grade, were found. Results also indicated significant direct effects of early initiation on two of the three substances, albeit with a different pattern of effects over time for each substance by years post high school. Importantly, while early initiation remains the strongest predictor of long-term tobacco and illicit drug use, results show how PCAQ might reduce its harmful effects.

  9. Development of High Resolution Data for Irrigated Area and Cropping Patterns in India

    Science.gov (United States)

    K a, A.; Mishra, V.

    2015-12-01

    Information of crop phenology and its individual effect on irrigation is essential to improve the simulation of land surface states and fluxes. We use moderate resolution imaging spectroradiometer (MODIS) - Normalized difference vegetation index (NDVI) at 250 m resolution for monitoring temporal changes in irrigation and cropping patterns in India. We used the obtained dataset of cropping pattern for quantifying the effect of irrigation on land surface states and fluxes by using an uncoupled land surface model. The cropping patterns are derived by using the planting, heading, harvesting, and growing dates for each agro-ecological zone separately. Moreover, we developed a high resolution irrigated area maps for the period of 1999-2014 for India. The high resolution irrigated area was compared with relatively coarse resolution (~ 10km) irrigated area from the Food and Agricultural Organization. To identify the seasonal effects we analyzed the spatial and temporal change of irrigation and cropping pattern for different temporal seasons. The new irrigation area information along with cropping pattern was used to study the water budget in India using the Noah Land surface Model (Noah LSM) for the period of 1999-2014.

  10. Disruptive Innovation Patterns Driven by Mega-Projects: A Sustainable Development Pattern Case of China’s High-Speed Rail

    Directory of Open Access Journals (Sweden)

    Bingxiu Gui

    2018-04-01

    Full Text Available Sustainable development of mega-projects has drawn many concerns around the world. The theory of disruptive innovation in mega-projects is a typical sustainable development pattern but still lacks systematic understanding. This article takes China’s high-speed rail (CHSR project as an example to analyze the disruptive innovation pattern of mega-projects. First, this paper systematically traces the theories of disruptive innovation and summarizes the connotations of disruptive innovation. Simultaneously, from the historical development of several typical mega-projects in China, this paper summarizes the connotations of mega-projects. Based on two connotations, this paper summarizes the theoretical basis of disruptive innovation in mega-projects. Second, this paper takes the CHSR project as a case to analyze its innovation pattern from the analysis of the development process, operation mechanism and influence in sustainability; the disruptive innovation pattern is put forward afterward. Third, the discussion is drawn from the perspectives of the characteristics, scope of application and innovation environment of the disruptive innovation of CHSR. Last, the conclusions of this article are summarized.

  11. Patterns of adaptation to children's food allergies.

    Science.gov (United States)

    Fedele, D A; McQuaid, E L; Faino, A; Strand, M; Cohen, S; Robinson, J; Atkins, D; Hourihane, J O'B; Klinnert, M D

    2016-04-01

    Families with food allergy (FA) are at risk of reduced quality of life and elevated anxiety. A moderate level of anxiety may be beneficial to sustain vigilance for food avoidance; however, excessive anxiety may increase risk for burden and maladjustment. The current study presents a framework for understanding the patterns of adaptation to FA across families and to identify typologies of families that would benefit from intervention. Participants included 57 children, 6-12 years old with documented FA, and their mothers. Families were assessed using the Food Allergy Management and Adaptation Scale. Families also completed measures of quality of life, anxiety, FA management, and psychosocial impairment. A hierarchical cluster analysis revealed that 56 of the 57 families of food-allergic children were categorized into four groups that differed on their adequacy of family FA management, levels of anxiety, and balanced psychosocial functioning: balanced responders (n = 23; 41%), high responders (n = 25; 45%), and low responders (n = 3; 5%). The fourth group, anxious high responders (n = 5; 9%), was characterized by extremely high maternal FA anxiety scores and low scores for balanced integration of FA management and psychosocial functioning. Families in clusters differed across illness and psychosocial outcome variables. Families with FA were characterized by patterns of FA management, anxiety, and ability to integrate FA demands into daily life. Identified adaptation patterns correspond with clinical impressions and provide a framework for identifying families in need of intervention. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  12. A comprehensive analysis of earthquake damage patterns using high dimensional model representation feature selection

    Science.gov (United States)

    Taşkin Kaya, Gülşen

    2013-10-01

    Recently, earthquake damage assessment using satellite images has been a very popular ongoing research direction. Especially with the availability of very high resolution (VHR) satellite images, a quite detailed damage map based on building scale has been produced, and various studies have also been conducted in the literature. As the spatial resolution of satellite images increases, distinguishability of damage patterns becomes more cruel especially in case of using only the spectral information during classification. In order to overcome this difficulty, textural information needs to be involved to the classification to improve the visual quality and reliability of damage map. There are many kinds of textural information which can be derived from VHR satellite images depending on the algorithm used. However, extraction of textural information and evaluation of them have been generally a time consuming process especially for the large areas affected from the earthquake due to the size of VHR image. Therefore, in order to provide a quick damage map, the most useful features describing damage patterns needs to be known in advance as well as the redundant features. In this study, a very high resolution satellite image after Iran, Bam earthquake was used to identify the earthquake damage. Not only the spectral information, textural information was also used during the classification. For textural information, second order Haralick features were extracted from the panchromatic image for the area of interest using gray level co-occurrence matrix with different size of windows and directions. In addition to using spatial features in classification, the most useful features representing the damage characteristic were selected with a novel feature selection method based on high dimensional model representation (HDMR) giving sensitivity of each feature during classification. The method called HDMR was recently proposed as an efficient tool to capture the input

  13. Study of Patterns and Subjective Quality of Sleep and Their Correlation with Personality Traits among Medical Students of Hamadan University of Medical Sciences

    Directory of Open Access Journals (Sweden)

    A. Farhadi Nasab

    2008-04-01

    Full Text Available Introduction & Objective: Sleep quality can affect human health and daily function. On the other hand, every person has relatively stable personality trait which lives with and has occupational, social and interpersonal interaction. Regarding the importance of sleep quality, and because less considerations have been devoted to correlation between sleep disturbances and personality traits, the present investigation was done. The purpose of this study was to determine personality traits and sleep patterns among medical students in Hamadan medical university and the relationship between traits inquestion sleep patterns as well. Materials & Methods: This descriptive and Cross – Sectional study involving 150 randomly selected medical students. Pittsburgh questionnaire, MMPI and a checking list for demographic information were employed. Data processing and statistical analysis were performed using SPSS10.Results: The findings of this study have showed that 48 percent of our cases have suffered from sleep disturbances. The number of personality traits such as narcissistic, histrionic and borderline (cluster B observed among students had greater frequencies than other traits. The average of night and day sleep time was 8.95±2.01. No meaningful correlation has been found between sleep disturbances and personality traits in our cases.Conclusion: A great number of medical students suffer from sleep disturbances, because it may highly affect student’s health and their daily function. More and wider studies should be done.

  14. Prediction of bread-making quality using size exclusion high ...

    African Journals Online (AJOL)

    Variation in the distribution of protein molecular weight in wheat (Triticum aestivum), influences breadmaking quality of wheat cultivars, resulting in either poor or good bread. The objective of this study was to predict breadmaking quality of wheat cultivars using size exclusion high performance liquid chromatography.

  15. Exome sequencing generates high quality data in non-target regions

    Directory of Open Access Journals (Sweden)

    Guo Yan

    2012-05-01

    Full Text Available Abstract Background Exome sequencing using next-generation sequencing technologies is a cost efficient approach to selectively sequencing coding regions of human genome for detection of disease variants. A significant amount of DNA fragments from the capture process fall outside target regions, and sequence data for positions outside target regions have been mostly ignored after alignment. Result We performed whole exome sequencing on 22 subjects using Agilent SureSelect capture reagent and 6 subjects using Illumina TrueSeq capture reagent. We also downloaded sequencing data for 6 subjects from the 1000 Genomes Project Pilot 3 study. Using these data, we examined the quality of SNPs detected outside target regions by computing consistency rate with genotypes obtained from SNP chips or the Hapmap database, transition-transversion (Ti/Tv ratio, and percentage of SNPs inside dbSNP. For all three platforms, we obtained high-quality SNPs outside target regions, and some far from target regions. In our Agilent SureSelect data, we obtained 84,049 high-quality SNPs outside target regions compared to 65,231 SNPs inside target regions (a 129% increase. For our Illumina TrueSeq data, we obtained 222,171 high-quality SNPs outside target regions compared to 95,818 SNPs inside target regions (a 232% increase. For the data from the 1000 Genomes Project, we obtained 7,139 high-quality SNPs outside target regions compared to 1,548 SNPs inside target regions (a 461% increase. Conclusions These results demonstrate that a significant amount of high quality genotypes outside target regions can be obtained from exome sequencing data. These data should not be ignored in genetic epidemiology studies.

  16. Decision-making patterns and self-confidence in high school adolescents

    Directory of Open Access Journals (Sweden)

    Alejandro César Antonio Luna Bernal

    2014-07-01

    Full Text Available The present study aimed to analyse the factor structure of the Melbourne Decision Making Questionnaire (DMQ-II, and to examine the relationships between the factors identified and Self-confidence, in order to conceptualize the decision-making process in adolescents under the Conflict Model of Decision Making. Participants were 992 Mexican high-school students, aged between 15 and 19 years. The three factors were identified as decision-making patterns in adolescents: a Vigilance, b Hipervigilance/Procrastination and c Buck-passing. The Self-confidence showed a positive effect on Vigilance, and a negative effect on theother two patterns. Results are discussed considering the literature on decision making in adolescence.

  17. Geographic techniques and recent applications of remote sensing to landscape-water quality studies

    Science.gov (United States)

    Griffith, J.A.

    2002-01-01

    This article overviews recent advances in studies of landscape-water quality relationships using remote sensing techniques. With the increasing feasibility of using remotely-sensed data, landscape-water quality studies can now be more easily performed on regional, multi-state scales. The traditional method of relating land use and land cover to water quality has been extended to include landscape pattern and other landscape information derived from satellite data. Three items are focused on in this article: 1) the increasing recognition of the importance of larger-scale studies of regional water quality that require a landscape perspective; 2) the increasing importance of remotely sensed data, such as the imagery-derived normalized difference vegetation index (NDVI) and vegetation phenological metrics derived from time-series NDVI data; and 3) landscape pattern. In some studies, using landscape pattern metrics explained some of the variation in water quality not explained by land use/cover. However, in some other studies, the NDVI metrics were even more highly correlated to certain water quality parameters than either landscape pattern metrics or land use/cover proportions. Although studies relating landscape pattern metrics to water quality have had mixed results, this recent body of work applying these landscape measures and satellite-derived metrics to water quality analysis has demonstrated their potential usefulness in monitoring watershed conditions across large regions.

  18. Wafer-Level Packaging Method for RF MEMS Applications Using Pre-Patterned BCB Polymer

    OpenAIRE

    Zhuhao Gong; Yulong Zhang; Xin Guo; Zewen Liu

    2018-01-01

    A radio-frequency micro-electro-mechanical system (RF MEMS) wafer-level packaging (WLP) method using pre-patterned benzo-cyclo-butene (BCB) polymers with a high-resistivity silicon cap is proposed to achieve high bonding quality and excellent RF performance. In this process, the BCB polymer was pre-defined to form the sealing ring and bonding layer by the spin-coating and patterning of photosensitive BCB before the cavity formation. During anisotropic wet etching of the silicon wafer to gener...

  19. Effects of lighting pattern and photoperiod on egg production and egg quality of a native chicken under free-range condition.

    Science.gov (United States)

    Geng, A L; Zhang, Y; Zhang, J; Wang, H H; Chu, Q; Liu, H G

    2018-04-14

    The paper aimed to study the effects of lighting pattern and photoperiod alone and in combination on egg production, egg quality in Beijing You Chicken (BYC). A total of 630 19-wk-old BYC laying hens were randomly allocated to 6 groups with 105 birds each, 3 replicates per group, reared in individually lit floor pens with separate outdoor areas. A 2 × 3 factorial experiment (2 lighting patterns: continuous and intermittent lighting; 3 photoperiods: 16, 14, 12 h) was arranged, including 16L:8D (6:00 to 22:00) for group 1; 12L:2D:4L:6D (6:00 to 18:00, 20:00 to 24:00) for group 2; 14L:10D (6:00 to 20:00) for group 3; 10L:2D:4L:8D (6:00 to 16:00, 18:00 to 22:00) for group 4; 12L:12D (6:00 to 18:00) for group 5, and 8L:4D:4L:8D (6:00 to 14:00, 18:00 to 22:00) for group 6, respectively. Egg production parameters were calculated for 22 to 43, 44 to 57, and 22 to 57 wk, and egg quality parameters were measured at the end of 37 and 57 wk. The results showed that the egg production of BYC was not significantly affected by lighting pattern, photoperiod alone, or in combination during 22 to 43 and 22 to 57 wk (P > 0.05), but average feed intake in 12 h groups was significantly higher than those in 14 and 16 h groups during 22 to 43 and 22 to 57 wk (P Egg mass and feed egg ratio were significantly affected by lighting pattern, photoperiod alone, and in combination during 44 to 57 wk (P Egg mass was significantly higher (P = 0.05) and feed egg ratio was significantly lower (P = 0.03) in continuous groups than in intermittent groups. There were significant effects for eggshell thickness, albumen height, haugh unit, and egg grade by lighting pattern alone (P egg production was not significantly affected by lighting pattern alone during 22 to 57 wk (P > 0.05), but the photoperiod significantly affected average feed intake (P egg production during 44 to 57 wk, and intermittent lighting is better for egg quality of the native bird at 37 wk; 3) 12 h lighting is enough for meeting

  20. High-resolution liquid patterns via three-dimensional droplet shape control.

    Science.gov (United States)

    Raj, Rishi; Adera, Solomon; Enright, Ryan; Wang, Evelyn N

    2014-09-25

    Understanding liquid dynamics on surfaces can provide insight into nature's design and enable fine manipulation capability in biological, manufacturing, microfluidic and thermal management applications. Of particular interest is the ability to control the shape of the droplet contact area on the surface, which is typically circular on a smooth homogeneous surface. Here, we show the ability to tailor various droplet contact area shapes ranging from squares, rectangles, hexagons, octagons, to dodecagons via the design of the structure or chemical heterogeneity on the surface. We simultaneously obtain the necessary physical insights to develop a universal model for the three-dimensional droplet shape by characterizing the droplet side and top profiles. Furthermore, arrays of droplets with controlled shapes and high spatial resolution can be achieved using this approach. This liquid-based patterning strategy promises low-cost fabrication of integrated circuits, conductive patterns and bio-microarrays for high-density information storage and miniaturized biochips and biosensors, among others.

  1. High resolution imaging of surface patterns of single bacterial cells

    International Nuclear Information System (INIS)

    Greif, Dominik; Wesner, Daniel; Regtmeier, Jan; Anselmetti, Dario

    2010-01-01

    We systematically studied the origin of surface patterns observed on single Sinorhizobium meliloti bacterial cells by comparing the complementary techniques atomic force microscopy (AFM) and scanning electron microscopy (SEM). Conditions ranged from living bacteria in liquid to fixed bacteria in high vacuum. Stepwise, we applied different sample modifications (fixation, drying, metal coating, etc.) and characterized the observed surface patterns. A detailed analysis revealed that the surface structure with wrinkled protrusions in SEM images were not generated de novo but most likely evolved from similar and naturally present structures on the surface of living bacteria. The influence of osmotic stress to the surface structure of living cells was evaluated and also the contribution of exopolysaccharide and lipopolysaccharide (LPS) by imaging two mutant strains of the bacterium under native conditions. AFM images of living bacteria in culture medium exhibited surface structures of the size of single proteins emphasizing the usefulness of AFM for high resolution cell imaging.

  2. Deterministic patterned growth of high-mobility large-crystal graphene: a path towards wafer scale integration

    Science.gov (United States)

    Miseikis, Vaidotas; Bianco, Federica; David, Jérémy; Gemmi, Mauro; Pellegrini, Vittorio; Romagnoli, Marco; Coletti, Camilla

    2017-06-01

    We demonstrate rapid deterministic (seeded) growth of large single-crystals of graphene by chemical vapour deposition (CVD) utilising pre-patterned copper substrates with chromium nucleation sites. Arrays of graphene single-crystals as large as several hundred microns are grown with a periodicity of up to 1 mm. The graphene is transferred to target substrates using aligned and contamination- free semi-dry transfer. The high quality of the synthesised graphene is confirmed by Raman spectroscopy and transport measurements, demonstrating room-temperature carrier mobility of 21 000 cm2 V-1 s-1 when transferred on top of hexagonal boron nitride. By tailoring the nucleation of large single-crystals according to the desired device geometry, it will be possible to produce complex device architectures based on single-crystal graphene, thus paving the way to the adoption of CVD graphene in wafer-scale fabrication.

  3. Key factors for a high-quality VR experience

    Science.gov (United States)

    Champel, Mary-Luc; Doré, Renaud; Mollet, Nicolas

    2017-09-01

    For many years, Virtual Reality has been presented as a promising technology that could deliver a truly new experience to users. The media and entertainment industry is now investigating the possibility to offer a video-based VR 360 experience. Nevertheless, there is a substantial risk that VR 360 could have the same fate as 3DTV if it cannot offer more than just being the next fad. The present paper aims at presenting the various quality factors required for a high-quality VR experience. More specifically, this paper will focus on the main three VR quality pillars: visual, audio and immersion.

  4. Effects of Birkeland current limitation on high-latitude convection patterns

    International Nuclear Information System (INIS)

    Marklund, G.T.; Raadu, M.A.; Lindqvist, P.-A.

    1984-12-01

    It is shown how the high-latitude convection pattern may be mo- dified by substorm-enhanced polarization electric fields. These are generated whenever the flow of those Birkeland currents which are associated with ionospheric conductivity gradients is limited. Such Birkeland currents are fed mainly by the enhanced Pedersen current in the evening and morning sectors of the auro- ral oval and by the enhanced Hall current around local midnight. As the current limitation increases, the ionospheric potential, represented here by a symmetric two-cell pattern, will rotate clockwise and deform, just as the associated Birkeland current distribution. The resulting patterns are shown to agree well with observations. A pronounced westward intrusion of the equi- potential contours occurs in the auroral oval, and may be asso- ciated with the Westward Travelling Surge. This feature does not however require any assumed longitudinal conductivity gradi- ents. Rather it falls out naturally when the limitation of the enhanced Pedersen current is taken into account. (Author)

  5. Sleep quality and its relationship with quality of life among high-risk pregnant women (gestational diabetes and hypertension).

    Science.gov (United States)

    Saadati, Fatemeh; Sehhatiei Shafaei, Fahimeh; Mirghafourvand, Mozhgan

    2018-01-01

    Sleep is one of the most basic human requirements. This research aims at determining the status of sleep quality and its relationship with quality of life among high-risk pregnant women in Tabriz, Iran, in 2015. This research was a sectional study done on 364 qualified women in 28-36 weeks of pregnancy suffering from mild preeclampsia and gestational diabetes. The sampling was done as convenience. Personal-social-midwifery questionnaire, Pittsburg sleep quality, and quality of life in pregnancy (QOL-ORAV) were used for gathering data. Multivariate linear regression model was used for determining the relationship between sleep quality and its subsets with quality of life and controlling confounders. In the current study, the prevalence of sleep disturbance was 96.4%. Mean (SD) of the total score of sleep quality was 10.1 (4.1) and the total score of quality of life was 61.7 (17.3). According to Pearson's correlation test, there was statistically significant relationship between quality of life and sleep quality and all its subsets except sleep duration and use of sleep medication (p quality of life. The findings of current research show that sleep quality is low among high-risk pregnant women and quality of life is medium. So, it is necessary that required training is given by health cares for improving sleep quality and quality of life to mothers.

  6. The quality of school lunch consumed reflects overall eating patterns in 11-16-year-old schoolchildren in Finland.

    Science.gov (United States)

    Tilles-Tirkkonen, Tanja; Pentikäinen, Saara; Lappi, Jenni; Karhunen, Leila; Poutanen, Kaisa; Mykkänen, Hannu

    2011-12-01

    To explore how the quality of school lunch consumed reflected overall eating patterns in school-aged children. Children filled in an Internet-based questionnaire about their eating patterns. The children were then divided into balanced and imbalanced school lunch eaters on the basis of their responses in the questionnaire. A balanced school lunch consisted of, by the definition used in the present study, a main dish, salad and bread. Eleven primary schools and one middle school in eastern Finland. A total of 531 schoolchildren (247 boys and 284 girls) aged 11-16 years. The school lunch was balanced in 46·5% of children. Eating a balanced school lunch was associated with overall healthier eating patterns outside school. Children who ate a balanced school lunch had more regular meal times and consumed healthier snacks. They ate fruit or berries and vegetables, dairy products and wholegrain foods more often, consumed fewer salty snacks, pizzas, meat pies and drank fewer soft drinks and energy drinks. Their eating patterns at home were also healthier, with vegetables being offered at every family dinner and fruit being offered daily, whereas soft drinks were offered seldom. The choices made by children in their school lunch reflect the overall eating patterns among school-aged children. Eating a balanced school lunch is associated with more regular meal patterns, the availability of healthier foods at home and an overall healthier diet, suggesting that healthy eating patterns are learnt at home.

  7. Next Generation High Quality Videoconferencing Service for the LHC

    CERN Multimedia

    CERN. Geneva

    2012-01-01

    In recent times, we have witnessed an explosion of video initiatives in the industry worldwide. Several advancements in video technology are currently improving the way we interact and collaborate. These advancements are forcing tendencies and overall experiences: any device in any network can be used to collaborate, in most cases with an overall high quality. To cope with this technology progresses, CERN IT Department has taken the leading role to establish strategies and directions to improve the user experience in remote dispersed meetings and remote collaboration at large in the worldwide LHC communities. Due to the high rate of dispersion in the LHC user communities, these are critically dependent of videoconferencing technology, with a need of robustness and high quality for the best possible user experience. We will present an analysis of the factors that influenced the technical and strategic choices to improve the reliability, efficiency and overall quality of the LHC remote sessions. In particular, ...

  8. Comprehensive Technical Support for High-Quality Anthracite Production: A Case Study in the Xinqiao Coal Mine, Yongxia Mining Area, China

    Directory of Open Access Journals (Sweden)

    Wei Zhang

    2015-12-01

    Full Text Available The effective production of high-quality anthracite has attracted increasing global attention. Based on the coal occurrence in Yongxia Mining Area and mining conditions of a coalface in Xinqiao Coal Mine, we proposed a systematic study on the technical support for the production of high-quality anthracite. Six key steps were explored, including coal falling at the coalface, transport, underground bunker storage, main shaft hoisting, coal preparation on the ground, and railway wagon loading. The study resulted in optimized running parameters for the shearers, and the rotating patterns of the shearer drums was altered (one-way cutting was employed. Mining height and roof supporting intensity were reduced. Besides, loose presplitting millisecond blasting and mechanized mining were applied to upgrade the coal quantity and the lump coal production rate. Additionally, the coalface end transloading, coalface crush, transport systems, underground storage, and main shaft skip unloading processes were improved, and fragmentation-prevention techniques were used in the washing and railway wagon loading processes. As a result, the lump coal production rate was maintained at a high level and fragmentation was significantly reduced. Because of using the parameters and techniques determined in this research, high-quality coal production and increased profits were achieved. The research results could provide theoretical guidance and methodology for other anthracite production bases.

  9. Chemical and structural composition of Atlantic Canadian moose (Alces alces) incisors with patterns of high breakage

    Energy Technology Data Exchange (ETDEWEB)

    MacKenzie, Cynthia S. Kendall; Clough, Michael J. [Biology Department, Saint Mary' s University, Halifax, Nova Scotia, Canada B3H 3C3 (Canada); Broders, Hugh G., E-mail: hugh.broders@smu.ca [Biology Department, Saint Mary' s University, Halifax, Nova Scotia, Canada B3H 3C3 (Canada); Tubrett, Mike [Inco Innovation Centre, ICP-MS Facility, Memorial University of Newfoundland, P.O. Box 4200, St. John' s, Newfoundland, Canada A1C 5S7 (Canada)

    2011-11-15

    Analysis of mammalian teeth can provide information regarding local environmental conditions. For example, a high incidence of breakage and wear within a population may indicate poor food quality. Individuals consuming a diet causing high mechanical stress on their teeth, and/or lacking the appropriate minerals for proper development, could experience degradation of tooth condition. Previously, we documented a high rate of incisor tooth breakage, with age, in two genetically distinct moose populations in Atlantic Canada. In this study, multi-element ({sup 11}B, {sup 63}Cu, {sup 64}Zn, {sup 75}As, {sup 85}Rb, {sup 88}Sr, {sup 111}Cd, {sup 118}Sn, {sup 137}Ba, {sup 208}Pb, {sup 232}Th, and {sup 238}U) analyses using laser ablation ICP-MS were performed on moose incisors from multiple North American regions. The purpose was to determine whether the elemental composition of moose incisors varies among regions, and whether that variation is related to tooth degradation among Atlantic Canadian populations. A principal components analysis revealed that nearly 50% of the elemental variation in the inner enamel matrix of moose teeth was explained by three groupings of elements. The element groupings revealed differences among geographic regions, but did not explain the variation between incisors that were broken and those that were not. Regression models indicate that the elemental group which includes Cu, Pb, and Zn is related to decreases in incisal integrity. It is likely that other environmental factors contribute to the occurrence of increased incisor breakage in affected populations. The relationship between food resource quantity and quality, as a function of moose density, is hypothesized to explain loss of tooth integrity. - Highlights: {yields} Multi-element analysis of 1300 moose incisors using laser ablation ICP-MS. {yields} Three element groupings explain 50% of tooth composition variation among regions. {yields} Regional differences in tooth composition

  10. Highly efficient silver patterning without photo-resist using simple silver precursors

    International Nuclear Information System (INIS)

    Byun, Younghun; Hwang, Eoc-Chae; Lee, Sang-Yun; Lyu, Yi-Yeol; Yim, Jin-Heong; Kim, Jin-Young; Chang, Seok; Pu, Lyong Sun; Kim, Ji Man

    2005-01-01

    Highly efficient method for silver patterning without photo-resist was developed by using high photosensitive organo-silver precursors, which were prepared by a simple reaction of silver salts and excess of amines. The FT-IR and GC-MS spectra were recorded depending on UV exposure time, for (n-PrNH 2 )Ag(NO 3 ).0.5MeCN and (n-PrNH 2 )Ag(NO 2 ).0.5MeCN, to understand the photolysis mechanism. The results indicate not only dissociation of coordinated amine and acetonitrile, but also decomposition of corresponding anion upon UV irradiation. When a precursor thin film was exposed to broadband UV irradiation, a partially reduced and insoluble silver species were formed within several minutes. After development, the irradiated areas were treated with a reducing agent to obtain pure metallic patterns. Subsequently, annealing step was followed at 100-350 deg. C to increase the adhesion of interface and cohesion of silver particles. The line resolution of 5 μm was obtained by the present silver precursors. Film thickness was also controllable from 50 to 250 nm by repetition of the above procedure. The average electrical conductivity was in the range of 3-43 Ω cm, measured by four-point probe technique. AES depth profile of the silver pattern thus obtained showed carbon and oxygen contents are less than 1% through the whole range. Even though sulfur contaminant exists on the surface, it was believed that nearly pure silver pattern was generated

  11. Optimization of nitridation conditions for high quality inter-polysilicon dielectric layers

    NARCIS (Netherlands)

    Klootwijk, J.H.; Bergveld, H.J.; van Kranenburg, H.; Woerlee, P.H.; Wallinga, Hans

    1996-01-01

    Nitridation of deposited high temperature oxides (HTO) was studied to form high quality inter-polysilicon dielectric layers for embedded non volatile memories. Good quality dielectric layers were obtained earlier by using an optimized deposition of polysilicon and by performing a post-dielectric

  12. Empirically Derived Dietary Patterns in UK Adults Are Associated with Sociodemographic Characteristics, Lifestyle, and Diet Quality

    Science.gov (United States)

    Cade, Janet; Dawson, Jeremy; Holdsworth, Michelle

    2018-01-01

    The aim of this study was to examine empirical dietary patterns in UK adults and their association with sociodemographic characteristics, lifestyle factors, self-reported nutrient intake, nutrient biomarkers, and the Nutrient-based Diet Quality Score (NDQS) using National Diet and Nutrition Survey data 2008–2012 (n = 2083; mean age 49 years; 43.3% male). Four patterns explained 13.6% of the total variance: ‘Snacks, fast food, fizzy drinks’ (SFFFD), ‘Fruit, vegetables, oily fish’ (FVOF), ‘Meat, potatoes, beer’ (MPB), and ‘Sugary foods, dairy’ (SFD). ‘SFFFD’ was associated positively with: being male; smoking; body mass index (BMI); urinary sodium; intake of non-milk extrinsic sugars (NMES), fat and starch; and negatively with: age; plasma carotenoids; and NDQS. ‘FVOF’ was associated positively with: being non-white; age; income; socioeconomic classification (National Statistics Socio-economic Classifications; NSSEC); plasma carotenoids; intake of non-starch polysaccharides and polyunsaturated fatty acids. It was negatively associated with: being male, smoking, BMI, urinary sodium, intake of saturated fat; and NMES and NDQS. Whilst the patterns explained only 13.6% of the total variance, they were associated with self-reported nutrient intake, biomarkers of nutrient intake, sociodemographic and lifestyle variables, and the NDQS. These findings provide support for dietary patterns analyses as a means of exploring dietary intake in the UK population to inform public health nutrition policy and guidance. PMID:29415478

  13. Patterning high explosives at the nanoscale

    Energy Technology Data Exchange (ETDEWEB)

    Nafday, Omkar A.; Pitchimani, Rajasekar; Weeks, Brandon L. [Department of Chemical Engineering, Texas Tech University, Lubbock, TX 79409 (United States); Haaheim, Jason [NanoInk Inc., 8025 Lamon Ave., Skokie, IL 60077 (United States)

    2006-10-15

    For the first time, we have shown that spin coating and Dip pen nanolithography (DPN trademark) are simple methods of preparing energetic materials such as PETN and HMX on the nanoscale, requiring no heating of the energetic material. Nanoscale patterning has been demonstrated by the DPN method while continuous thin films were produced using the spin coating method. Results are presented for preparing continuous PETN thin films of nanometer thickness by the spin coating method and for controlling the architecture of arbitrary nanoscale patterns of PETN and HMX by the DPN method. These methods are simple for patterning energetic materials and can be extended beyond PETN and HMX, opening the door for fundamental studies at the nanoscale. (Abstract Copyright [2006], Wiley Periodicals, Inc.)

  14. Producing high-quality slash pine seeds

    Science.gov (United States)

    James Barnett; Sue Varela

    2003-01-01

    Slash pine is a desirable species. It serves many purposes and is well adapted to poorly drained flatwoods and seasonally flooded areas along the lower Coastal Plain of the Southeastern US. The use of high-quality seeds has been shown to produce uniform seedlings for outplanting, which is key to silvicultural success along the Coastal Plain and elsewhere. We present...

  15. Breeding and maintaining high-quality insects

    DEFF Research Database (Denmark)

    Jensen, Kim; Kristensen, Torsten Nygård; Heckmann, Lars-Henrik

    2017-01-01

    Insects have a large potential for sustainably enhancing global food and feed production, and commercial insect production is a rising industry of high economic value. Insects suitable for production typically have fast growth, short generation time, efficient nutrient utilization, high...... reproductive potential, and thrive at high density. Insects may cost-efficiently convert agricultural and industrial food by-products into valuable protein once the technology is finetuned. However, since insect mass production is a new industry, the technology needed to efficiently farm these animals is still...... in a starting phase. Here, we discuss the challenges and precautions that need to be considered when breeding and maintaining high-quality insect populations for food and feed. This involves techniques typically used in domestic animal breeding programs including maintaining genetically healthy populations...

  16. High Quality Virtual Reality for Architectural Exhibitions

    DEFF Research Database (Denmark)

    Kreutzberg, Anette

    2016-01-01

    This paper will summarise the findings from creating and implementing a visually high quality Virtual Reality (VR) experiment as part of an international architecture exhibition. It was the aim to represent the architectural spatial qualities as well as the atmosphere created from combining natural...... and artificial lighting in a prominent not yet built project. The outcome is twofold: Findings concerning the integration of VR in an exhibition space and findings concerning the experience of the virtual space itself. In the exhibition, an important aspect was the unmanned exhibition space, requiring the VR...... experience to be self-explanatory. Observations of different visitor reactions to the unmanned VR experience compared with visitor reactions at guided tours with personal instructions are evaluated. Data on perception of realism, spatial quality and light in the VR model were collected with qualitative...

  17. Authentication and distinction of Shenmai injection with HPLC fingerprint analysis assisted by pattern recognition techniques

    Directory of Open Access Journals (Sweden)

    Xue-Feng Lu

    2012-10-01

    Full Text Available In this paper, the feasibility and advantages of employing high performance liquid chromatographic (HPLC fingerprints combined with pattern recognition techniques for quality control of Shenmai injection were investigated and demonstrated. The Similarity Evaluation System was employed to evaluate the similarities of samples of Shenmai injection, and the HPLC generated chromatographic data were analyzed using hierarchical clustering analysis (HCA and soft independent modeling of class analogy (SIMCA. Consistent results were obtained to show that the authentic samples and the blended samples were successfully classified by SIMCA, which could be applied to accurate discrimination and quality control of Shenmai injection. Furthermore, samples could also be grouped in accordance with manufacturers. Our results revealed that the developed method has potential perspective for the original discrimination and quality control of Shenmai injection. Keywords: Shenmai injection, High performance liquid chromatography, Fingerprint, Pattern recognition

  18. Replication of patterned thin-film structures for use in plasmonics and metamaterials

    Science.gov (United States)

    Norris, David J; Han, Sang Eon; Bhan, Aditya; Nagpal, Prashant; Lindquist, Nathan Charles; Oh, Sang-Hyun

    2015-02-03

    The present invention provides templating methods for replicating patterned metal films from a template substrate such as for use in plasmonic devices and metamaterials. Advantageously, the template substrate is reusable and can provide plural copies of the structure of the template substrate. Because high-quality substrates that are inherently smooth and flat are available, patterned metal films in accordance with the present invention can advantageously provide surfaces that replicate the surface characteristics of the template substrate both in the patterned regions and in the unpatterned regions.

  19. Carbon nuclear magnetic resonance spectroscopic fingerprinting of commercial gasoline: pattern-recognition analyses for screening quality control purposes.

    Science.gov (United States)

    Flumignan, Danilo Luiz; Boralle, Nivaldo; Oliveira, José Eduardo de

    2010-06-30

    In this work, the combination of carbon nuclear magnetic resonance ((13)C NMR) fingerprinting with pattern-recognition analyses provides an original and alternative approach to screening commercial gasoline quality. Soft Independent Modelling of Class Analogy (SIMCA) was performed on spectroscopic fingerprints to classify representative commercial gasoline samples, which were selected by Hierarchical Cluster Analyses (HCA) over several months in retails services of gas stations, into previously quality-defined classes. Following optimized (13)C NMR-SIMCA algorithm, sensitivity values were obtained in the training set (99.0%), with leave-one-out cross-validation, and external prediction set (92.0%). Governmental laboratories could employ this method as a rapid screening analysis to discourage adulteration practices. Copyright 2010 Elsevier B.V. All rights reserved.

  20. New process for high optical quality InAs quantum dots grown on patterned GaAs(001) substrates

    NARCIS (Netherlands)

    Alonso-González, Pablo; González, Luisa; González, Yolanda; Fuster, David; Fernández-Martinez, Ivan; Martin-Sánchez, Javier; Abelmann, Leon

    2007-01-01

    This work presents a selective ultraviolet (UV)-ozone oxidation-chemical etching process that has been used, in combination with laser interference lithography (LIL), for the preparation of GaAs patterned substrates. Further molecular beam epitaxy (MBE) growth of InAs results in ordered InAs/GaAs

  1. Caloric beverage drinking patterns are differentially associated with diet quality and adiposity among Spanish girls and boys.

    Science.gov (United States)

    Schröder, Helmut; Mendez, Michelle A; Ribas, Lourdes; Funtikova, Anna N; Gomez, Santiago F; Fíto, Montserrat; Aranceta, Javier; Serra-Majem, Lluis

    2014-09-01

    The present study assesses the impact of beverage consumption pattern on diet quality and anthropometric proxy measures for abdominal adiposity in Spanish adolescents. Data were obtained from a representative national sample of 1,149 Spanish adolescents aged 10-18 years. Height, weight, and waist circumferences were measured. Dietary assessment was performed with a 24-h recall. Beverage patterns were identified by cluster analysis. Adherence to the Mediterranean diet was measured by the KIDMED index. Three beverage clusters were identified for boys--"whole milk" (62.5 %), "low-fat milk" (17.5 %) and "soft drinks" (20.1 %)-and for girls--"whole milk" (57.8 %), "low-fat milk" (20.8 %) and juice (21.4 %), accounting for 8.3, 9.6, 13.9, 8.6, 11.5 and 12.9 % of total energy intake, respectively. Each unit of increase in the KIDMED index was associated with a 14.0 % higher (p = 0.004) and 11.0 % lower (p = 0.048) probability of membership in the "low-fat milk" and "soft drinks" cluster in girls and boys, respectively, compared with the "whole milk" cluster. Boys in the "soft drinks" cluster had a higher risk of 1-unit increase in BMI z score (29.0 %, p = 0.040), 1-cm increase in waist circumference regressed on height and age (3.0 %, p = 0.027) and 0.1-unit increase in waist/height ratio (21.4 %, p = 0.031) compared with the "whole milk" cluster. A caloric beverage pattern dominated by intake of "soft drinks" is related to general and abdominal adiposity and diet quality in Spanish male adolescents.

  2. A high-transparency, micro-patternable chip for X-ray diffraction analysis of microcrystals under native growth conditions

    Energy Technology Data Exchange (ETDEWEB)

    Murray, Thomas D. [University of California, Berkeley, CA 94720 (United States); Johns Hopkins University School of Medicine, Baltimore, MD 21205 (United States); Lyubimov, Artem Y. [Stanford University, Stanford, CA 94305 (United States); Ogata, Craig M. [Argonne National Laboratory, Argonne, IL 60439 (United States); Vo, Huy [Johns Hopkins University, Baltimore, MD 21205 (United States); Uervirojnangkoorn, Monarin; Brunger, Axel T., E-mail: brunger@stanford.edu [Stanford University, Stanford, CA 94305 (United States); Berger, James M., E-mail: brunger@stanford.edu [Johns Hopkins University School of Medicine, Baltimore, MD 21205 (United States); University of California, Berkeley, CA 94720 (United States)

    2015-09-26

    A highly X-ray-transparent, silicon nitride-based device has been designed and fabricated to harvest protein microcrystals for high-resolution X-ray diffraction data collection using microfocus beamlines and XFELs. Microcrystals present a significant impediment to the determination of macromolecular structures by X-ray diffraction methods. Although microfocus synchrotron beamlines and X-ray free-electron lasers (XFELs) can enable the collection of interpretable diffraction data from microcrystals, there is a need for efficient methods of harvesting small volumes (<2 µl) of microcrystals grown under common laboratory formats and delivering them to an X-ray beam source under native growth conditions. One approach that shows promise in overcoming the challenges intrinsic to microcrystal analysis is to pair so-called ‘fixed-target’ sample-delivery devices with microbeam-based X-ray diffraction methods. However, to record weak diffraction patterns it is necessary to fabricate devices from X-ray-transparent materials that minimize background scattering. Presented here is the design of a new micro-diffraction device consisting of three layers fabricated from silicon nitride, photoresist and polyimide film. The chip features low X-ray scattering and X-ray absorption properties, and uses a customizable blend of hydrophobic and hydrophilic surface patterns to help localize microcrystals to defined regions. Microcrystals in their native growth conditions can be loaded into the chips with a standard pipette, allowing data collection at room temperature. Diffraction data collected from hen egg-white lysozyme microcrystals (10–15 µm) loaded into the chips yielded a complete, high-resolution (<1.6 Å) data set sufficient to determine a high-quality structure by molecular replacement. The features of the chip allow the rapid and user-friendly analysis of microcrystals grown under virtually any laboratory format at microfocus synchrotron beamlines and XFELs.

  3. A high-transparency, micro-patternable chip for X-ray diffraction analysis of microcrystals under native growth conditions

    International Nuclear Information System (INIS)

    Murray, Thomas D.; Lyubimov, Artem Y.; Ogata, Craig M.; Vo, Huy; Uervirojnangkoorn, Monarin; Brunger, Axel T.; Berger, James M.

    2015-01-01

    A highly X-ray-transparent, silicon nitride-based device has been designed and fabricated to harvest protein microcrystals for high-resolution X-ray diffraction data collection using microfocus beamlines and XFELs. Microcrystals present a significant impediment to the determination of macromolecular structures by X-ray diffraction methods. Although microfocus synchrotron beamlines and X-ray free-electron lasers (XFELs) can enable the collection of interpretable diffraction data from microcrystals, there is a need for efficient methods of harvesting small volumes (<2 µl) of microcrystals grown under common laboratory formats and delivering them to an X-ray beam source under native growth conditions. One approach that shows promise in overcoming the challenges intrinsic to microcrystal analysis is to pair so-called ‘fixed-target’ sample-delivery devices with microbeam-based X-ray diffraction methods. However, to record weak diffraction patterns it is necessary to fabricate devices from X-ray-transparent materials that minimize background scattering. Presented here is the design of a new micro-diffraction device consisting of three layers fabricated from silicon nitride, photoresist and polyimide film. The chip features low X-ray scattering and X-ray absorption properties, and uses a customizable blend of hydrophobic and hydrophilic surface patterns to help localize microcrystals to defined regions. Microcrystals in their native growth conditions can be loaded into the chips with a standard pipette, allowing data collection at room temperature. Diffraction data collected from hen egg-white lysozyme microcrystals (10–15 µm) loaded into the chips yielded a complete, high-resolution (<1.6 Å) data set sufficient to determine a high-quality structure by molecular replacement. The features of the chip allow the rapid and user-friendly analysis of microcrystals grown under virtually any laboratory format at microfocus synchrotron beamlines and XFELs

  4. Dietary Patterns and the Risk of Colorectal Cancer.

    Science.gov (United States)

    Fung, Teresa T; Brown, Lisa S

    2013-03-01

    Diet and lifestyle play a significant role in the development of colorectal cancer, but the full complexity of the association is not yet understood. Dietary pattern analysis is an important new technique that may help to elucidate the relationship. This review examines the most common techniques for extrapolating dietary patterns and reviews dietary pattern/colorectal cancer studies published between September 2011 and August 2012. The studies reviewed are consistent with prior research but include a more diverse international population. Results from investigations using a priori dietary patterns (i.e., diet quality scores) and a posteriori methods, which identify existing eating patterns (i.e., principal component analysis), continue to support the benefits of a plant-based diet with some dairy as a means to lower the risk of colorectal cancer, whereas a diet high in meats, refined grains, and added sugar appears to increase risk. The association between colorectal cancer and alcohol remains unclear.

  5. Mechanical-plowing-based high-speed patterning on hard material via advanced-control and ultrasonic probe vibration

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Zhihua; Zou, Qingze, E-mail: qzzou@rci.rutgers.edu [Mechanical and Aerospace Engineering Department, Rutgers, the State University of New Jersey, Piscataway, New Jersey 08854 (United States); Tan, Jun; Jiang, Wei [Electrical and Computer Engineering Department, Rutgers, the State University of New Jersey, Piscataway, New Jersey 08854 (United States)

    2013-11-15

    In this paper, we present a high-speed direct pattern fabrication on hard materials (e.g., a tungsten-coated quartz substrate) via mechanical plowing. Compared to other probe-based nanolithography techniques based on chemical- and/or physical-reactions (e.g., the Dip-pen technique), mechanical plowing is meritorious for its low cost, ease of process control, and capability of working with a wide variety of materials beyond conductive and/or soft materials. However, direct patterning on hard material faces two daunting challenges. First, the patterning throughput is ultimately hindered by the “writing” (plowing) speed, which, in turn, is limited by the adverse effects that can be excited/induced during high-speed, and/or large-range plowing, including the vibrational dynamics of the actuation system (the piezoelectric actuator, the cantilever, and the mechanical fixture connecting the cantilever to the actuator), the dynamic cross-axis coupling between different axes of motion, and the hysteresis and the drift effects related to the piezoelectric actuators. Secondly, it is very challenging to directly pattern on ultra-hard materials via plowing. Even with a diamond probe, the line depth of the pattern via continuous plowing on ultra-hard materials such as tungsten, is still rather small (<0.5 nm), particularly when the “writing” speed becomes high. To overcome these two challenges, we propose to utilize a novel iterative learning control technique to achieve precision tracking of the desired pattern during high-speed, large-range plowing, and introduce ultrasonic vibration of the probe in the normal (vertical) direction during the plowing process to enable direct patterning on ultra hard materials. The proposed approach was implemented to directly fabricate patterns on a mask with tungsten coating and quartz substrate. The experimental results demonstrated that a large-size pattern of four grooves (20 μm in length with 300 nm spacing between lines) can be

  6. Global patterns of fragmentation and connectivity of mammalian carnivore habitat

    OpenAIRE

    Crooks, Kevin R.; Burdett, Christopher L.; Theobald, David M.; Rondinini, Carlo; Boitani, Luigi

    2011-01-01

    Although mammalian carnivores are vulnerable to habitat fragmentation and require landscape connectivity, their global patterns of fragmentation and connectivity have not been examined. We use recently developed high-resolution habitat suitability models to conduct comparative analyses and to identify global hotspots of fragmentation and connectivity for the world's terrestrial carnivores. Species with less fragmentation (i.e. more interior high-quality habitat) had larger geographical ranges...

  7. A combined high-sugar and high-saturated-fat dietary pattern is associated with more depressive symptoms in a multi-ethnic population: The HELIUS (Healthy Life in an Urban Setting) study

    NARCIS (Netherlands)

    Vermeulen, E.; Stronks, K.; Snijder, M.B.; Schene, A.H.; Lok, A.; Vries, J.H. de; Visser, M.; Brouwer, I.A.; Nicolaou, M.

    2017-01-01

    OBJECTIVE: To identify a high-sugar (HS) dietary pattern, a high-saturated-fat (HF) dietary pattern and a combined high-sugar and high-saturated-fat (HSHF) dietary pattern and to explore if these dietary patterns are associated with depressive symptoms. DESIGN: We used data from the HELIUS (Healthy

  8. A combined high-sugar and high-saturated-fat dietary pattern is associated with more depressive symptoms in a multi-ethnic population: the HELIUS (Healthy Life in an Urban Setting) study

    NARCIS (Netherlands)

    Vermeulen, Esther; Stronks, Karien; Snijder, Marieke B.; Schene, Aart H.; Lok, Anja; De Vries, Jeanne H.; Visser, Marjolein; Brouwer, Ingeborg A.; Nicolaou, Mary

    OBJECTIVE: To identify a high-sugar (HS) dietary pattern, a high-saturated-fat (HF) dietary pattern and a combined high-sugar and high-saturated-fat (HSHF) dietary pattern and to explore if these dietary patterns are associated with depressive symptoms. DESIGN: We used data from the HELIUS (Healthy

  9. A low cost high resolution pattern generator for electron-beam lithography

    International Nuclear Information System (INIS)

    Pennelli, G.; D'Angelo, F.; Piotto, M.; Barillaro, G.; Pellegrini, B.

    2003-01-01

    A simple, very low cost pattern generator for electron-beam lithography is presented. When it is applied to a scanning electron microscope, the system allows a high precision positioning of the beam for lithography of very small structures. Patterns are generated by a suitable software implemented on a personal computer, by using very simple functions, allowing an easy development of new writing strategies for a great adaptability to different user necessities. Hardware solutions, as optocouplers and battery supply, have been implemented for reduction of noise and disturbs on the voltages controlling the positioning of the beam

  10. Estimation of fringe orientation for optical fringe patterns with poor quality based on Fourier transform.

    Science.gov (United States)

    Tang, Chen; Wang, Zhifang; Wang, Linlin; Wu, Jian; Gao, Tao; Yan, Si

    2010-02-01

    Fringe orientation represents an important property of fringes. The estimation of orientation from a poor quality fringe image is still a challenging problem faced in this area. This paper introduces a new approach for estimating optical fringe orientation with a poor quality image. This approach is based on the power spectrum analysis of the Fourier transform. We evaluate the performance of this algorithm via application to a variety of test cases and comparison with the widely used gradient-based method and accumulate-differences method. The experimental results show that our method is capable of calculating fringe orientation robustly even when the quality of fringe images is considerably low because of high or low density, high noise, and low contrast. Under the same conditions, our accuracy is even better than that obtained with the gradient-based and accumulate-differences methods, especially for fringe images with poor quality.

  11. Female Pattern Hair Loss: a clinical and pathophysiological review.

    Science.gov (United States)

    Ramos, Paulo Müller; Miot, Hélio Amante

    2015-01-01

    Female Pattern Hair Loss or female androgenetic alopecia is the main cause of hair loss in adult women and has a major impact on patients' quality of life. It evolves from the progressive miniaturization of follicles that lead to a subsequent decrease of the hair density, leading to a non-scarring diffuse alopecia, with characteristic clinical, dermoscopic and histological patterns. In spite of the high frequency of the disease and the relevance of its psychological impact, its pathogenesis is not yet fully understood, being influenced by genetic, hormonal and environmental factors. In addition, response to treatment is variable. In this article, authors discuss the main clinical, epidemiological and pathophysiological aspects of female pattern hair loss.

  12. Several grain dietary patterns are associated with better diet quality and improved shortfall nutrient intakes in US children and adolescents: a study focusing on the 2015-2020 Dietary Guidelines for Americans.

    Science.gov (United States)

    Papanikolaou, Yanni; Jones, Julie Miller; Fulgoni, Victor L

    2017-02-20

    The present study identified the most commonly consumed grain food patterns in US children and adolescents (2-18 years-old; N = 8,367) relative to those not consuming grains and compared diet quality and nutrient intakes, with focus on 2015-2020 Dietary Guidelines for Americans (2015-2020 DGA) shortfall nutrients. Cluster analysis using data from the National Health and Nutrition Examination Survey 2005-2010, identified 8 unique grain food patterns: a) no consumption of main grain groups, b) cakes, cookies and pies, c) yeast bread and rolls, d) cereals, e) pasta, cooked cereals and rice, f) crackers and salty snacks, g) pancakes, waffles and French toast and other grains, and h) quick breads. Energy intake was higher for all grain cluster patterns examined, except 'cereals', compared to no grains. Children and adolescents in the 'yeast bread and rolls', 'cereals', 'pasta, cooked cereals and rice', and 'crackers and salty snacks' patterns had a higher diet quality relative to no grains (all p dietary fiber intake was greater in five of the seven grain patterns, ranging from 1.8 - 2.8 g more per day (all p patterns, except cakes, cookies and pies had higher EA daily folate relative to children in the no grains pattern (all p pattern (all p patterns relative to no grains (all p patterns in children and adolescents were associated with improved 2015-2020 DGA shortfall nutrient intakes and diet quality as compared to those consuming no grains.

  13. Integration study of high quality teaching resources in universities

    Directory of Open Access Journals (Sweden)

    Honglu Liu

    2012-12-01

    Full Text Available Purpose: The development level and quality of education depend on the merits and efficiency in the use of teaching resources, especially in the case of obvious contradiction between the demand and supply of teaching resources. So to integrate teaching resources, improve the efficiency in the use of high quality teaching resources, and take the road of content development to enhance the competitiveness of education has become very important and urgent.Design/methodology/approach: On the basis of analysis on the teaching resources of universities and the problems they faced, this paper introduced the basic concepts of cloud storage, and built the integration architecture of high quality teaching resources in universities based on the cloud storage.Findings and Originality/value: The HDFS-based cloud storage proposed in this paper is a dynamically adjustable and Internet-based storage solution, and the users can access storage targets using the network through a common and easy-to-use protocol and application programming interfaces. This new technology is useful for end users benefits. With the continuous development and improvement of cloud storage, it will necessarily result in more and more applications in the institutions of higher learning and education network.Originality/value: This paper introduced the cloud storage into the integration of high quality teaching resources in universities first and as a new form of service, it can be a good solution.

  14. A combined high-sugar and high-saturated-fat dietary pattern is associated with more depressive symptoms in a multi-ethnic population: the HELIUS (Healthy Life in an Urban Setting) study

    NARCIS (Netherlands)

    Vermeulen, Esther; Stronks, Karien; Snijder, Marieke B.; Schene, Aart H.; Lok, Anja; de Vries, Jeanne H.; Visser, Marjolein; Brouwer, Ingeborg A.; Nicolaou, Mary

    2017-01-01

    To identify a high-sugar (HS) dietary pattern, a high-saturated-fat (HF) dietary pattern and a combined high-sugar and high-saturated-fat (HSHF) dietary pattern and to explore if these dietary patterns are associated with depressive symptoms. We used data from the HELIUS (Healthy Life in an Urban

  15. High-quality InN films on MgO (100) substrates: The key role of 30° in-plane rotation

    International Nuclear Information System (INIS)

    Compeán García, V. D.; López Luna, E.; Rodríguez, A. G.; Vidal, M. A.; Orozco Hinostroza, I. E.; Escobosa Echavarría, A.

    2014-01-01

    High crystalline layers of InN were grown on MgO(100) substrates by gas source molecular beam epitaxy. Good quality films were obtained by means of an in-plane rotation process induced by the annealing of an InN buffer layer to minimize the misfit between InN and MgO. In situ reflection high-energy electron diffraction showed linear streaky patterns along the [011 ¯ 0] azimuth and a superimposed diffraction along the [112 ¯ 0] azimuth, which correspond to a 30° α-InN film rotation. This rotation reduces the mismatch at the MgO/InN interface from 19.5% to less than 3.5%, increasing the structural quality, which was analyzed by high-resolution X-ray diffraction and Raman spectroscopy. Only the (0002) c plane diffraction of α-InN was observed and was centered at 2θ = 31.4°. Raman spectroscopy showed two modes corresponding to the hexagonal phase: E1(LO) at 591 cm −1 and E2(high) at 488 cm −1 . Hall effect measurements showed a carrier density of 9 × 10 18  cm −3 and an electron Hall mobility of 340 cm 2 /(V s) for a film thickness of 140 nm

  16. Landscape-scale patterns of fire and drought on the high plains, USA

    Science.gov (United States)

    Paulette Ford; Charles Jackson; Matthew Reeves; Benjamin Bird; Dave Turner

    2015-01-01

    We examine 31 years (1982-2012) of temperature, precipitation and natural wildfire occurrence data for Federal and Tribal lands to determine landscape-scale patterns of drought and fire on the southern and central High Plains of the western United States. The High Plains states of Colorado, Kansas, Nebraska, New Mexico, Oklahoma, South Dakota, Texas and...

  17. Canine serum protein patterns using high-resolution electrophoresis (HRE).

    Science.gov (United States)

    Abate, O; Zanatta, R; Malisano, T; Dotta, U

    2000-03-01

    Serum protein values were determined in 26 healthy dogs using agarose gel electrophoresis (SPE), splitting the electrophoretic separation into six regions: albumin, alpha(1), alpha(2), beta(1), beta(2)and gamma globulins. High-resolution electrophoresis (HRE) was used to separate single proteins. Serum proteins from dogs (26 healthy and 20 affected by various diseases) were then characterized by electrophoretic immunofixation (IFE) and Sudan black staining on HRE film. Haemoglobin and normal canine plasma and serum were used to identify haptoglobin and fibrinogen, respectively. In the standard pattern, determined by HRE, the following proteins were identified: albumin, alpha(1)-lipoprotein (alpha(1)-region), haptoglobin and alpha(2)-macroglobulin (alpha(2)-region), beta -lipoprotein and C3 (beta(1)-region), transferrin and IgM (beta(2)-region), IgG (mostly in gamma -region and partly in beta(2)-region). The HRE pattern shown by healthy dogs could be compared with those of dogs affected by various diseases to obtain clinical information. Copyright 2000 Harcourt Publishers Ltd.

  18. EXPERT-ANALITICAL MONITORING OF LEARNING PROCESS QUALITY IN HIGH SCHOOL

    Directory of Open Access Journals (Sweden)

    T. M. Korotun

    2010-10-01

    Full Text Available The technological model is proposed for monitoring process of learning process quality in high school compliant with current European and home standards. The mathematical methods are elaborated for diverse activities as to learning process objects quality determination unified support. They self-consistently combine: automatic expert evaluation with Bayesian net and Value tree models; Delphi technique enhancement; best practices for education quality assessment. Quality estimates’ consistency index is introduced for their choice and acceptability analysis. Its permanent increasing over monitoring stages is guaranteed. The tools for these stages’ automatic support are described.

  19. Combined microfluidization and ultrasonication: a synergistic protocol for high-efficient processing of SWCNT dispersions with high quality

    Energy Technology Data Exchange (ETDEWEB)

    Luo, Sida, E-mail: s.luo@buaa.edu.cn [Beihang University, School of Mechanical Engineering and Automation (China); Liu, Tao, E-mail: tliu@fsu.edu [Florida State University, High-Performance Materials Institute (United States); Wang, Yong; Li, Liuhe [Beihang University, School of Mechanical Engineering and Automation (China); Wang, Guantao; Luo, Yun [China University of Geosciences, Center of Safety Research, School of Engineering and Technology (China)

    2016-08-15

    High-efficient and large-scale production of high-quality CNT dispersions is necessary for meeting the future needs to develop various CNT-based electronic devices. Herein, we have designed novel processing protocols by combining conventional ultrasonication process with a new microfluidization technique to produce high-quality SWCNT dispersions with improved processing efficiency. To judge the quality of SWCNT dispersions, one critical factor is the degree of exfoliation, which could be quantified by both geometrical dimension of the exfoliated nanotubes and percentage of individual tubes in a given dispersion. In this paper, the synergistic effect of the combined protocols was systematically investigated through evaluating SWCNT dispersions with newly developed characterization techniques, namely preparative ultracentrifuge method (PUM) and simultaneous Raman scattering and photoluminescence spectroscopy (SRSPL). The results of both techniques draw similar conclusions that as compared with either of the processes operated separately, a low-pass microfluidization followed by a reasonable duration of ultrasonication could substantially improve the processing efficiency to produce high-quality SWCNT dispersions with averaged particle length and diameter as small as ~600 and ~2 nm, respectively.Graphical abstract.

  20. Scalable Sub-micron Patterning of Organic Materials Toward High Density Soft Electronics.

    Science.gov (United States)

    Kim, Jaekyun; Kim, Myung-Gil; Kim, Jaehyun; Jo, Sangho; Kang, Jingu; Jo, Jeong-Wan; Lee, Woobin; Hwang, Chahwan; Moon, Juhyuk; Yang, Lin; Kim, Yun-Hi; Noh, Yong-Young; Jaung, Jae Yun; Kim, Yong-Hoon; Park, Sung Kyu

    2015-09-28

    The success of silicon based high density integrated circuits ignited explosive expansion of microelectronics. Although the inorganic semiconductors have shown superior carrier mobilities for conventional high speed switching devices, the emergence of unconventional applications, such as flexible electronics, highly sensitive photosensors, large area sensor array, and tailored optoelectronics, brought intensive research on next generation electronic materials. The rationally designed multifunctional soft electronic materials, organic and carbon-based semiconductors, are demonstrated with low-cost solution process, exceptional mechanical stability, and on-demand optoelectronic properties. Unfortunately, the industrial implementation of the soft electronic materials has been hindered due to lack of scalable fine-patterning methods. In this report, we demonstrated facile general route for high throughput sub-micron patterning of soft materials, using spatially selective deep-ultraviolet irradiation. For organic and carbon-based materials, the highly energetic photons (e.g. deep-ultraviolet rays) enable direct photo-conversion from conducting/semiconducting to insulating state through molecular dissociation and disordering with spatial resolution down to a sub-μm-scale. The successful demonstration of organic semiconductor circuitry promise our result proliferate industrial adoption of soft materials for next generation electronics.

  1. Direct patterning of highly-conductive graphene@copper composites using copper naphthenate as a resist for graphene device applications.

    Science.gov (United States)

    Bi, Kaixi; Xiang, Quan; Chen, Yiqin; Shi, Huimin; Li, Zhiqin; Lin, Jun; Zhang, Yongzhe; Wan, Qiang; Zhang, Guanhua; Qin, Shiqiao; Zhang, Xueao; Duan, Huigao

    2017-11-09

    We report an electron-beam lithography process to directly fabricate graphene@copper composite patterns without involving metal deposition, lift-off and etching processes using copper naphthenate as a high-resolution negative-tone resist. As a commonly used industrial painting product, copper naphthenate is extremely cheap with a long shelf time but demonstrates an unexpected patterning resolution better than 10 nm. With appropriate annealing under a hydrogen atmosphere, the produced graphene@copper composite patterns show high conductivity of ∼400 S cm -1 . X-ray diffraction, conformal Raman spectroscopy and X-ray photoelectron spectroscopy were used to analyze the chemical composition of the final patterns. With the properties of high resolution and high conductivity, the patterned graphene@copper composites could be used as conductive pads and interconnects for graphene electronic devices with ohmic contacts. Compared to common fabrication processes involving metal evaporation and lift-off steps, this pattern-transfer-free fabrication process using copper naphthenate resist is direct and simple but allows comparable device performance in practical device applications.

  2. Image Correlation Pattern Optimization for Micro-Scale In-Situ Strain Measurements

    Science.gov (United States)

    Bomarito, G. F.; Hochhalter, J. D.; Cannon, A. H.

    2016-01-01

    -matched shape functions. An important implication, as discussed by Sutton et al., is that in the presence of highly localized deformations (e.g., crack fronts), error can be reduced by minimizing the subset size. In other words, smaller subsets allow the more accurate resolution of localized deformations. Contrarily, the choice of optimal subset size has been widely studied and a general consensus is that larger subsets with more information content are less prone to random error. Thus, an optimal subset size balances the systematic error from under matched deformations with random error from measurement noise. The alternative approach pursued in the current work is to choose a small subset size and optimize the information content within (i.e., optimizing an applied DIC pattern), rather than finding an optimal subset size. In the literature, many pattern quality metrics have been proposed, e.g., sum of square intensity gradient (SSSIG), mean subset fluctuation, gray level co-occurrence, autocorrelation-based metrics, and speckle-based metrics. The majority of these metrics were developed to quantify the quality of common pseudo-random patterns after they have been applied, and were not created with the intent of pattern generation. As such, it is found that none of the metrics examined in this study are fit to be the objective function of a pattern generation optimization. In some cases, such as with speckle-based metrics, application to pixel by pixel patterns is ill-conditioned and requires somewhat arbitrary extensions. In other cases, such as with the SSSIG, it is shown that trivial solutions exist for the optimum of the metric which are ill-suited for DIC (such as a checkerboard pattern). In the current work, a multi-metric optimization method is proposed whereby quality is viewed as a combination of individual quality metrics. Specifically, SSSIG and two auto-correlation metrics are used which have generally competitive objectives. Thus, each metric could be viewed as a

  3. Examination of Operation Quality for High-frequent Railway Operation

    DEFF Research Database (Denmark)

    Landex, Alex; Kaas, Anders H.

    2009-01-01

    take the first train in their direction. The article examines four different approaches to examine operation quality for high-frequent operation that are based on the experiences of the passengers. These approaches are the service frequency of the operation, travel time extension, a combination......The examination of operation quality for high-frequent operation requires other approaches than the typical evaluation of punctuality (trains on time) and reliability (operated trains). This is because passengers in high-frequent railway systems do not necessarily notice train delays as they just...... of the service frequency and travel time approaches, and passenger delays. The service frequency and travel time approaches are simple measurements with low complexity and complement each other. Therefore, the article recommends combining the service frequency and travel time approaches to get a more accurate...

  4. Physico-Chemical and microbial water quality assessment of Densu ...

    African Journals Online (AJOL)

    Water quality assessment conducted in the Densu basin of Ghana between July ... High nutrient loads observed in the basin were due to domestic, agricultural and ... a pattern which is an intermediate between fresh and sea water systems.

  5. High-Resolution Spin-on-Patterning of Perovskite Thin Films for a Multiplexed Image Sensor Array.

    Science.gov (United States)

    Lee, Woongchan; Lee, Jongha; Yun, Huiwon; Kim, Joonsoo; Park, Jinhong; Choi, Changsoon; Kim, Dong Chan; Seo, Hyunseon; Lee, Hakyong; Yu, Ji Woong; Lee, Won Bo; Kim, Dae-Hyeong

    2017-10-01

    Inorganic-organic hybrid perovskite thin films have attracted significant attention as an alternative to silicon in photon-absorbing devices mainly because of their superb optoelectronic properties. However, high-definition patterning of perovskite thin films, which is important for fabrication of the image sensor array, is hardly accomplished owing to their extreme instability in general photolithographic solvents. Here, a novel patterning process for perovskite thin films is described: the high-resolution spin-on-patterning (SoP) process. This fast and facile process is compatible with a variety of spin-coated perovskite materials and perovskite deposition techniques. The SoP process is successfully applied to develop a high-performance, ultrathin, and deformable perovskite-on-silicon multiplexed image sensor array, paving the road toward next-generation image sensor arrays. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  6. Endorectal high dose rate brachytherapy quality assurance

    International Nuclear Information System (INIS)

    Devic, S.; Vuong, T.; Evans, M.; Podgorsak, E.

    2008-01-01

    We describe our quality assurance method for preoperative high dose rate (HDR) brachytherapy of endorectal tumours. Reproduction of the treatment planning dose distribution on a daily basis is crucial for treatment success. Due to the cylindrical symmetry, two types of adjustments are necessary: applicator rotation and dose distribution shift along the applicator axis. (author)

  7. Mediterranean and western dietary patterns are related to markers of testicular function among healthy men

    DEFF Research Database (Denmark)

    Cutillas-Tolín, A; Mínguez-Alarcón, L; Mendiola, J

    2015-01-01

    STUDY QUESTION: Are there any associations of dietary patterns with semen quality, reproductive hormone levels, and testicular volume, as markers of testicular function? SUMMARY ANSWER: These results suggest that traditional Mediterranean diets may have a positive impact on male reproductive...... potential. WHAT IS KNOWN ALREADY: The Mediterranean diet has been related to lower risk of multiple chronic diseases, but its effects on reproduction potential are unclear. STUDY DESIGN, SIZE, DURATION: Cross-sectional sample of 215 male university students recruited from October 2010 to November 2011...... to analyze the relation between diet patterns with semen quality parameters, reproductive hormone levels and testicular volume adjusting for potential confounders. MAIN RESULTS AND THE ROLE OF CHANCE: We identified two dietary patterns: a Mediterranean (characterized by high intakes of vegetables, fruits...

  8. Nutrient intake, diet quality, and weight/adiposity parameters in breakfast patterns compared with no breakfast in adults: National Health and Nutrition Examination Survey 2001-2008.

    Science.gov (United States)

    O'Neil, Carol E; Nicklas, Theresa A; Fulgoni, Victor L

    2014-12-01

    The effect of different breakfast consumption patterns on nutrient intake, diet quality, and weight/adiposity status is unknown. To compare nutrient intake, diet quality, and weight/adiposity measures of consumers assigned to different breakfast patterns with breakfast skippers. These associations were assessed in adults 19+ years (N=18,988) participating in the 2001-2008 National Health and Nutrition Examination Survey. Intake was determined from 1-day 24-hour dietary recall. Diet quality was quantified using the Healthy Eating Index-2005. Body mass index (calculated as kg/m(2)) and waist circumferences were determined. Twelve patterns (including No Breakfast [approximately 19% of population]), explaining 58% of the variance in energy from the breakfast meal, were examined. Covariate adjusted general linear models were used to compare nutrient intakes, Healthy Eating Index-2005 scores, and body mass index/waist circumference of consumers of different patterns with breakfast skippers. The P value was Bonferroni corrected (Juice and Presweetened Ready-to-Eat Cereal (RTEC)/Lower-Fat Milk patterns had lower daily intakes of nutrients to limit (added sugars, saturated fatty acids, solid fats, cholesterol, and sodium) than breakfast skippers. Consumers of the Grain/100% Fruit Juice; Presweetened RTEC/Lower-Fat Milk; and RTEC/Lower-Fat Milk/Whole Fruit/100% Fruit Juice patterns had higher daily intakes of all shortfall nutrients examined (dietary fiber; vitamins A, D, and C; calcium, potassium, folate, iron, and magnesium) than breakfast skippers. Consumers of the Grain/100% Fruit Juice; Grain; Presweetened RTEC/Lower-Fat Milk; RTEC/Lower-Fat Milk/Whole Fruit/100% Fruit Juice; Cooked Cereal; Lower-Fat Milk/Whole Fruit; and Whole Fruit patterns had higher Healthy Eating Index-2005 scores than breakfast skippers. Consumers of the Grain/100% Fruit Juice; Presweetened RTEC/Lower-Fat Milk; RTEC/Lower-Fat Milk/Whole Fruit/100% Fruit Juice; and Cooked Cereal patterns had lower

  9. U.S. High School Graduation Rates: Patterns and Explanations. NBER Working Paper No. 18701

    Science.gov (United States)

    Murnane, Richard J.

    2013-01-01

    I survey the evidence on patterns in U.S. high school graduation rates over the period 1970-2010 and report the results of new research conducted to fill in holes in the evidence. I begin by pointing out the strengths and limitations of existing data sources. I then describe six striking patterns in graduation rates. They include stagnation over…

  10. Automated, high accuracy classification of Parkinsonian disorders: a pattern recognition approach.

    Directory of Open Access Journals (Sweden)

    Andre F Marquand

    Full Text Available Progressive supranuclear palsy (PSP, multiple system atrophy (MSA and idiopathic Parkinson's disease (IPD can be clinically indistinguishable, especially in the early stages, despite distinct patterns of molecular pathology. Structural neuroimaging holds promise for providing objective biomarkers for discriminating these diseases at the single subject level but all studies to date have reported incomplete separation of disease groups. In this study, we employed multi-class pattern recognition to assess the value of anatomical patterns derived from a widely available structural neuroimaging sequence for automated classification of these disorders. To achieve this, 17 patients with PSP, 14 with IPD and 19 with MSA were scanned using structural MRI along with 19 healthy controls (HCs. An advanced probabilistic pattern recognition approach was employed to evaluate the diagnostic value of several pre-defined anatomical patterns for discriminating the disorders, including: (i a subcortical motor network; (ii each of its component regions and (iii the whole brain. All disease groups could be discriminated simultaneously with high accuracy using the subcortical motor network. The region providing the most accurate predictions overall was the midbrain/brainstem, which discriminated all disease groups from one another and from HCs. The subcortical network also produced more accurate predictions than the whole brain and all of its constituent regions. PSP was accurately predicted from the midbrain/brainstem, cerebellum and all basal ganglia compartments; MSA from the midbrain/brainstem and cerebellum and IPD from the midbrain/brainstem only. This study demonstrates that automated analysis of structural MRI can accurately predict diagnosis in individual patients with Parkinsonian disorders, and identifies distinct patterns of regional atrophy particularly useful for this process.

  11. Certain dietary patterns are beneficial for the metabolic syndrome: reviewing the evidence.

    Science.gov (United States)

    Calton, Emily K; James, Anthony P; Pannu, Poonam K; Soares, Mario J

    2014-07-01

    The metabolic syndrome (MetS) is a global public health issue of increasing magnitude. The Asia-Pacific region is expected to be hardest hit due to large population numbers, rising obesity, and insulin resistance (IR). This review assessed the protective effects of dietary patterns and their components on MetS. A literature search was conducted using prominent electronic databases and search terms that included in combination: diet, dietary components, dietary patterns, and metabolic syndrome. Articles were restricted to prospective studies and high quality randomized controlled trials that were conducted on humans, reported in the English language, and within the time period of 2000 to 2012. Traditional factors such as age, gender, physical activity, and obesity were associated with risk of MetS; however, these potential confounders were not always accounted for in study outcomes. Three dietary patterns emerged from the review; a Mediterranean dietary pattern, dietary approaches to stop hypertension diet, and the Nordic Diet. Potential contributors to their beneficial effects on prevalence of MetS or reduction in MetS components included increases in fruits, vegetables, whole grains, dairy and dairy components, calcium, vitamin D, and whey protein, as well as monounsaturated fatty acids, and omega-3 fatty acids. Additional prospective and high quality randomized controlled trial studies that investigate Mediterranean dietary pattern, the dietary approaches to stop hypertension diet, and the Nordic Diet would cement the protective benefits of these diets against the MetS. Copyright © 2014 Elsevier Inc. All rights reserved.

  12. High-resolution electron-beam patternable nanocomposite containing metal nanoparticles for plasmonics

    International Nuclear Information System (INIS)

    Abargues, R; Marques-Hueso, J; Canet-Ferrer, J; Pedrueza, E; Valdes, J L; Jimenez, E; MartInez-Pastor, J P

    2008-01-01

    Polymer nanocomposites containing noble metal nanoparticles are promising materials for plasmonic applications. In this paper, we report on a high-resolution negative-tone nanocomposite resist based on poly(vinyl alcohol) where silver nanoparticles and nanopatterns are simultaneously generated by electron-beam lithography. Our results indicate nanostructures with a relatively high concentration of nanoparticles and, consequently, an electromagnetic coupling among the nanoparticles. Therefore, the patternable nanocomposite described in this work may be a suitable material for future plasmonic circuitry

  13. The effect of pattern overlap on the accuracy of high resolution electron backscatter diffraction measurements

    Energy Technology Data Exchange (ETDEWEB)

    Tong, Vivian, E-mail: v.tong13@imperial.ac.uk [Department of Materials, Imperial College London, Prince Consort Road, London SW7 2AZ (United Kingdom); Jiang, Jun [Department of Materials, Imperial College London, Prince Consort Road, London SW7 2AZ (United Kingdom); Wilkinson, Angus J. [Department of Materials, University of Oxford, Parks Road, Oxford OX1 3PH (United Kingdom); Britton, T. Ben [Department of Materials, Imperial College London, Prince Consort Road, London SW7 2AZ (United Kingdom)

    2015-08-15

    High resolution, cross-correlation-based, electron backscatter diffraction (EBSD) measures the variation of elastic strains and lattice rotations from a reference state. Regions near grain boundaries are often of interest but overlap of patterns from the two grains could reduce accuracy of the cross-correlation analysis. To explore this concern, patterns from the interior of two grains have been mixed to simulate the interaction volume crossing a grain boundary so that the effect on the accuracy of the cross correlation results can be tested. It was found that the accuracy of HR-EBSD strain measurements performed in a FEG-SEM on zirconium remains good until the incident beam is less than 18 nm from a grain boundary. A simulated microstructure was used to measure how often pattern overlap occurs at any given EBSD step size, and a simple relation was found linking the probability of overlap with step size. - Highlights: • Pattern overlap occurs at grain boundaries and reduces HR-EBSD accuracy. • A test is devised to measure the accuracy of HR-EBSD in the presence of overlap. • High pass filters can sometimes, but not generally, improve HR-EBSD measurements. • Accuracy of HR-EBSD remains high until the reference pattern intensity is <72%. • 9% of points near a grain boundary will have significant error for 200nm step size in Zircaloy-4.

  14. Growth and characterization of Ge nanostructures selectively grown on patterned Si

    International Nuclear Information System (INIS)

    Cheng, M.H.; Ni, W.X.; Luo, G.L.; Huang, S.C.; Chang, J.J.; Lee, C.Y.

    2008-01-01

    By utilizing different distribution of strain fields around the edges of oxide, which are dominated by a series of sizes of oxide-patterned windows, long-range ordered self-assembly Ge nanostructures, such as nano-rings, nano-disks and nano-dots, were selectively grown by ultra high vacuum chemical vapor deposition (UHV-CVD) on Si (001) substrates. High-resolution double-crystal symmetrical ω/2θ scans and two-dimensional reciprocal space mapping (2D-RSM) technologies employing the triple axis X-ray diffractometry have been used to evaluate the quality and strain status of as-deposited as well as in-situ annealed Ge nanostructures. Furthermore, we also compare the quality and strain status of Ge epilayers grown on planar unpatterned Si substrates. It was found that the quality of all Ge epitaxial structures is improved after in-situ annealing process and the quality of Ge nano-disk structures is better than that of Ge epilayers on planar unpatterned Si substrates, because oxide sidewalls are effective dislocation sinks. We also noted that the degree of relaxation for as-deposited Ge epilayers on planar unpatterned Si substrates is less than that for as-deposited Ge nano-disk structures. After in-situ annealing process, all Ge epitaxial structures are almost at full relaxation whatever Ge epitaxial structures grew on patterned or unpatterned Si substrates

  15. Eating patterns, dietary quality and obesity.

    Science.gov (United States)

    Nicklas, T A; Baranowski, T; Cullen, K W; Berenson, G

    2001-12-01

    Obesity among children has reached epidemic proportions. Today, an estimated one in four children in the United States is overweight. while 11% arc obese. Children who are overweight tend to remain so up to 20 years of age; in general, they have a 1.5- to twofold higher risk for becoming overweight as adults. The prevalence of overweight has increased approximately twofold in the 20-year period from 1974 to 1994, with the largest increases observed among 19- to 24-year-olds. The annual increases in weight and obesity that occurred from 1983 to 1994 were 50% higher than those from 1973 to 1982. Overweight youth are 2.4 times as likely to have a high serum total cholesterol level, and 43.5 times as likely to have three cardiovascular risk factors. Although the total energy intake of children has remained the same, and the macronutrient density of the diet has changed, the percentage of energy from fat has decreased, while that from carbohydrates and protein has increased. Children have been consuming lower amounts of fats/oils, vegetables/soups, breads/grains, mixed meats, desserts, candy, and eggs. and increasing amounts of fruits/fruit juices, beverages. poultry, snacks, condiments, and cheese. Changes in specific eating patterns may explain the increase in adiposity among children; e.g., increases have occurred in the number of meals eaten at restaurants, food availability, portion sizes, snacking and meal-skipping. Successful prevention and treatment of obesity in childhood could reduce the adult incidence of cardiovascular disease. Because substantial weight loss is difficult to maintain, the prevention of obesity by promoting healthier lifestyles should be one of our highest priorities in the new millennium.

  16. The Barriers to High-Quality Inpatient Pain Management: A Qualitative Study.

    Science.gov (United States)

    Lin, Richard J; Reid, M Carrington; Liu, Lydia L; Chused, Amy E; Evans, Arthur T

    2015-09-01

    The current literature suggests deficiencies in the quality of acute pain management among general medical inpatients. The aim of this qualitative study is to identify potential barriers to high-quality acute pain management among general medical inpatients at an urban academic medical center during a 2-year period. Data are collected using retrospective chart reviews, survey questionnaires, and semistructured, open-ended interviews of 40 general medical inpatients who have experienced pain during their hospitalization. Our results confirm high prevalence and disabling impacts of pain and significant patient- and provider-related barriers to high-quality acute pain management. We also identify unique system-related barriers such as time delay and pain management culture. Efforts to improve the pain management experience of general medical inpatients will need to address all these barriers. © The Author(s) 2014.

  17. When high-volume PCI operators in high-volume hospitals move to lower volume hospitals-Do they still maintain high volume and quality of outcomes?

    Science.gov (United States)

    Lu, Tsung-Hsueh; Li, Sheng-Tun; Liang, Fu-Wen; Lee, Jo-Chi; Yin, Wei-Hsian

    2017-10-31

    The aim of this quasi-experimental study was to examine whether high-volume percutaneous coronary intervention (PCI) operators still maintain high volume and quality of outcomes when they moved to lower volume hospitals. Systematic reviews have indicated that high-volume PCI operators and hospitals have higher quality outcomes. However, little is known on whether high PCI volume and high quality outcomes are mainly due to operator characteristics (i.e., skill and experience) and is portable across organizations or whether it is due to hospital characteristics (i.e., equipment, team, and management system) and is less portable. We used Taiwan National Health Insurance claims data 2000-2012 to identify 98 high-volume PCI operators, 10 of whom moved from one hospital to another during the study period. We compared the PCI volume, risk-adjusted mortality ratio, and major adverse cardiovascular event (MACE) ratio before and after moving. Of the 10 high-volume operators who moved, 6 moved from high- to moderate- or low-volume hospitals, with median annual PCI volumes (interquartile range) of 130 (117-165) in prior hospitals and 54 (46-84) in subsequent hospitals (the hospital the operator moved to), and the remaining 4 moved from high to high-volume hospitals, with median annual PCI volumes (interquartile range) of 151 (133-162) in prior hospitals and 193 (178-239) in subsequent hospitals. No significant differences were observed in the risk-adjusted mortality ratios and MACE ratios between high-volume operators and matched controls before and after moving. High-volume operators cannot maintain high volume when they moved from high to moderate or low-volume hospitals; however, the quality of care is maintained. High PCI volume and high-quality outcomes are less portable and more hospital bound. © 2017 Wiley Periodicals, Inc.

  18. Characteristics of primary care practices associated with high quality of care.

    Science.gov (United States)

    Beaulieu, Marie-Dominique; Haggerty, Jeannie; Tousignant, Pierre; Barnsley, Janet; Hogg, William; Geneau, Robert; Hudon, Éveline; Duplain, Réjean; Denis, Jean-Louis; Bonin, Lucie; Del Grande, Claudio; Dragieva, Natalyia

    2013-09-03

    No primary practice care model has been shown to be superior in achieving high-quality primary care. We aimed to identify the organizational characteristics of primary care practices that provide high-quality primary care. We performed a cross-sectional observational study involving a stratified random sample of 37 primary care practices from 3 regions of Quebec. We recruited 1457 patients who had 1 of 2 chronic care conditions or 1 of 6 episodic care conditions. The main outcome was the overall technical quality score. We measured organizational characteristics by use of a validated questionnaire and the Team Climate Inventory. Statistical analyses were based on multilevel regression modelling. The following characteristics were strongly associated with overall technical quality of care score: physician remuneration method (27.0; 95% confidence interval [CI] 19.0-35.0), extent of sharing of administrative resources (7.6; 95% CI 0.8-14.4), presence of allied health professionals (15.3; 95% CI 5.4-25.2) and/or specialist physicians (19.6; 95% CI 8.3-30.9), the presence of mechanisms for maintaining or evaluating competence (7.7; 95% CI 3.0-12.4) and average organizational access to the practice (4.9; 95% CI 2.6-7.2). The number of physicians (1.2; 95% CI 0.6-1.8) and the average Team Climate Inventory score (1.3; 95% CI 0.1-2.5) were modestly associated with high-quality care. We identified a common set of organizational characteristics associated with high-quality primary care. Many of these characteristics are amenable to change through practice-level organizational changes.

  19. Identification of long-term trends and seasonality in high-frequency water quality data from the Yangtze River basin, China.

    Science.gov (United States)

    Duan, Weili; He, Bin; Chen, Yaning; Zou, Shan; Wang, Yi; Nover, Daniel; Chen, Wen; Yang, Guishan

    2018-01-01

    Comprehensive understanding of the long-term trends and seasonality of water quality is important for controlling water pollution. This study focuses on spatio-temporal distributions, long-term trends, and seasonality of water quality in the Yangtze River basin using a combination of the seasonal Mann-Kendall test and time-series decomposition. The used weekly water quality data were from 17 environmental stations for the period January 2004 to December 2015. Results show gradual improvement in water quality during this period in the Yangtze River basin and greater improvement in the Uppermost Yangtze River basin. The larger cities, with high GDP and population density, experienced relatively higher pollution levels due to discharge of industrial and household wastewater. There are higher pollution levels in Xiang and Gan River basins, as indicated by higher NH4-N and CODMn concentrations measured at the stations within these basins. Significant trends in water quality were identified for the 2004-2015 period. Operations of the three Gorges Reservoir (TGR) enhanced pH fluctuations and possibly attenuated CODMn, and NH4-N transportation. Finally, seasonal cycles of varying strength were detected for time-series of pollutants in river discharge. Seasonal patterns in pH indicate that maxima appear in winter, and minima in summer, with the opposite true for CODMn. Accurate understanding of long-term trends and seasonality are necessary goals of water quality monitoring system efforts and the analysis methods described here provide essential information for effectively controlling water pollution.

  20. Identification of long-term trends and seasonality in high-frequency water quality data from the Yangtze River basin, China

    Science.gov (United States)

    He, Bin; Chen, Yaning; Zou, Shan; Wang, Yi; Nover, Daniel; Chen, Wen; Yang, Guishan

    2018-01-01

    Comprehensive understanding of the long-term trends and seasonality of water quality is important for controlling water pollution. This study focuses on spatio-temporal distributions, long-term trends, and seasonality of water quality in the Yangtze River basin using a combination of the seasonal Mann-Kendall test and time-series decomposition. The used weekly water quality data were from 17 environmental stations for the period January 2004 to December 2015. Results show gradual improvement in water quality during this period in the Yangtze River basin and greater improvement in the Uppermost Yangtze River basin. The larger cities, with high GDP and population density, experienced relatively higher pollution levels due to discharge of industrial and household wastewater. There are higher pollution levels in Xiang and Gan River basins, as indicated by higher NH4-N and CODMn concentrations measured at the stations within these basins. Significant trends in water quality were identified for the 2004–2015 period. Operations of the three Gorges Reservoir (TGR) enhanced pH fluctuations and possibly attenuated CODMn, and NH4-N transportation. Finally, seasonal cycles of varying strength were detected for time-series of pollutants in river discharge. Seasonal patterns in pH indicate that maxima appear in winter, and minima in summer, with the opposite true for CODMn. Accurate understanding of long-term trends and seasonality are necessary goals of water quality monitoring system efforts and the analysis methods described here provide essential information for effectively controlling water pollution. PMID:29466354

  1. Influences on the quality of young children's diets: the importance of maternal food choices.

    Science.gov (United States)

    Fisk, Catherine M; Crozier, Sarah R; Inskip, Hazel M; Godfrey, Keith M; Cooper, Cyrus; Robinson, Siân M

    2011-01-01

    It is recognised that eating habits established in early childhood may track into adult life. Developing effective interventions to promote healthier patterns of eating throughout the life course requires a greater understanding of the diets of young children and the factors that influence early dietary patterns. In a longitudinal UK cohort study, we assessed the diets of 1640 children at age 3 years using an interviewer-administered FFQ and examined the influence of maternal and family factors on the quality of the children's diets. To describe dietary quality, we used a principal components analysis-defined pattern of foods that is consistent with healthy eating recommendations. This was termed a 'prudent' diet pattern and was characterised by high intakes of fruit, vegetables and wholemeal bread, but by low intakes of white bread, confectionery, chips and roast potatoes. The key influence on the quality of the children's diets was the quality of their mother's diets; alone it accounted for almost a third of the variance in child's dietary quality. Mothers who had better-quality diets, which complied with dietary recommendations, were more likely to have children with comparable diets. This relationship remained strong even after adjustment for all other factors considered, including maternal educational attainment, BMI and smoking, and the child's birth order and the time spent watching television. Our data provide strong evidence of shared family patterns of diet and suggest that interventions to improve the quality of young women's diets could be effective in improving the quality of their children's diets.

  2. High-quality InN films on MgO (100) substrates: The key role of 30° in-plane rotation

    Energy Technology Data Exchange (ETDEWEB)

    Compeán García, V. D.; López Luna, E.; Rodríguez, A. G.; Vidal, M. A. [Coordinación para la Innovación y Aplicación de la Ciencia y Tecnología (CIACyT), Universidad Autónoma de San Luis Potosí (UASLP), Álvaro Obregón 64, 78000 San Luis Potosí (Mexico); Orozco Hinostroza, I. E. [Instituto Potosino de Investigación Científica y Tecnológica, Camino a la Presa San José 2055, Col. Lomas 4a Sección, 78216 San Luis Potosí (Mexico); Escobosa Echavarría, A. [Electric Engineering Department, Centro de Investigación y Estudios Avanzados del IPN, Apartado Postal 14-740, 07000 México D.F. (Mexico)

    2014-05-12

    High crystalline layers of InN were grown on MgO(100) substrates by gas source molecular beam epitaxy. Good quality films were obtained by means of an in-plane rotation process induced by the annealing of an InN buffer layer to minimize the misfit between InN and MgO. In situ reflection high-energy electron diffraction showed linear streaky patterns along the [011{sup ¯}0] azimuth and a superimposed diffraction along the [112{sup ¯}0] azimuth, which correspond to a 30° α-InN film rotation. This rotation reduces the mismatch at the MgO/InN interface from 19.5% to less than 3.5%, increasing the structural quality, which was analyzed by high-resolution X-ray diffraction and Raman spectroscopy. Only the (0002) c plane diffraction of α-InN was observed and was centered at 2θ = 31.4°. Raman spectroscopy showed two modes corresponding to the hexagonal phase: E1(LO) at 591 cm{sup −1} and E2(high) at 488 cm{sup −1}. Hall effect measurements showed a carrier density of 9 × 10{sup 18} cm{sup −3} and an electron Hall mobility of 340 cm{sup 2}/(V s) for a film thickness of 140 nm.

  3. A combined high-sugar and high-saturated-fat dietary pattern is associated with more depressive symptoms in a multi-ethnic population: the HELIUS (Healthy Life in an Urban Setting) study.

    Science.gov (United States)

    Vermeulen, Esther; Stronks, Karien; Snijder, Marieke B; Schene, Aart H; Lok, Anja; de Vries, Jeanne H; Visser, Marjolein; Brouwer, Ingeborg A; Nicolaou, Mary

    2017-09-01

    To identify a high-sugar (HS) dietary pattern, a high-saturated-fat (HF) dietary pattern and a combined high-sugar and high-saturated-fat (HSHF) dietary pattern and to explore if these dietary patterns are associated with depressive symptoms. We used data from the HELIUS (Healthy Life in an Urban Setting) study and included 4969 individuals aged 18-70 years. Diet was assessed using four ethnic-specific FFQ. Dietary patterns were derived using reduced rank regression with mono- and disaccharides, saturated fat and total fat as response variables. The nine-item Patient Health Questionnaire (PHQ-9) was used to assess depressive symptoms by using continuous scores and depressed mood (identified using the cut-off point: PHQ-9 sum score ≥10). The Netherlands. Three dietary patterns were identified; an HSHF dietary pattern (including chocolates, red meat, added sugars, high-fat dairy products, fried foods, creamy sauces), an HS dietary pattern (including sugar-sweetened beverages, added sugars, fruit (juices)) and an HF dietary pattern (including high-fat dairy products, butter). When comparing extreme quartiles, consumption of an HSHF dietary pattern was associated with more depressive symptoms (Q1 v. Q4: β=0·18, 95 % CI 0·07, 0·30, P=0·001) and with higher odds of depressed mood (Q1 v. Q4: OR=2·36, 95 % CI 1·19, 4·66, P=0·014). No associations were found between consumption of the remaining dietary patterns and depressive symptoms. Higher consumption of an HSHF dietary pattern is associated with more depressive symptoms and with depressed mood. Our findings reinforce the idea that the focus should be on dietary patterns that are high in both sugar and saturated fat.

  4. High yield growth of patterned vertically aligned carbon nanotubes using inkjet-printed catalyst.

    Science.gov (United States)

    Beard, James D; Stringer, Jonathan; Ghita, Oana R; Smith, Patrick J

    2013-10-09

    This study reports on the fabrication of vertically aligned carbon nanotubes localized at specific sites on a growth substrate by deposition of a nanoparticle suspension using inkjet printing. Carbon nanotubes were grown with high yield as vertically aligned forests to a length of approximately 400 μm. The use of inkjet printing for catalyst fabrication considerably improves the production rate of vertically aligned patterned nanotube forests compared with conventional patterning techniques, for example, electron beam lithography or photolithography.

  5. High throughput soft embossing process for micro-patterning of PEDOT thin films

    DEFF Research Database (Denmark)

    Fanzio, Paola; Cagliani, Alberto; Peterffy, Kristof G.

    2017-01-01

    The patterning of conductive polymers is a major challenge in the implementation of these materials in several research and industrial applications, spanning from photovoltaics to biosensors. Within this context, we have developed a reliable technique to pattern a thin layer of the conductive...... polymer poly(3,4-ethylenedioxythiophene) (PEDOT) by means of a low cost and high throughput soft embossing process. We were able to reproduce a functional conductive pattern with a minimum dimension of 1 μm and to fabricate electrically decoupled electrodes. Moreover, the conductivity of the PEDOT films...... has been characterized, finding that a post-processing treatment with Ethylene Glycol allows an increase in conductivity and a decrease in water solubility of the PEDOT film. Finally, cyclic voltammetry demonstrates that the post-treatment also ensures the electrochemical activity of the film. Our...

  6. Determination of gene expression patterns using high-throughput RNA in situ hybridizaion to whole-mount Drosophila embryos

    Energy Technology Data Exchange (ETDEWEB)

    Weiszmann, R.; Hammonds, A.S.; Celniker, S.E.

    2009-04-09

    We describe a high-throughput protocol for RNA in situ hybridization (ISH) to Drosophila embryos in a 96-well format. cDNA or genomic DNA templates are amplified by PCR and then digoxigenin-labeled ribonucleotides are incorporated into antisense RNA probes by in vitro transcription. The quality of each probe is evaluated before ISH using a RNA probe quantification (dot blot) assay. RNA probes are hybridized to fixed, mixed-staged Drosophila embryos in 96-well plates. The resulting stained embryos can be examined and photographed immediately or stored at 4oC for later analysis. Starting with fixed, staged embryos, the protocol takes 6 d from probe template production through hybridization. Preparation of fixed embryos requires a minimum of 2 weeks to collect embryos representing all stages. The method has been used to determine the expression patterns of over 6,000 genes throughout embryogenesis.

  7. Highly Parallelized Pattern Matching Execution for the ATLAS Experiment

    CERN Document Server

    Citraro, Saverio; The ATLAS collaboration

    2015-01-01

    The trigger system of the ATLAS experiment at LHC will extend its rejection capabilities during operations in 2015-2018 by introducing the Fast TracKer system (FTK). FTK is a hardware based system capable of finding charged particle tracks by analyzing hits in silicon detectors at the rate of 105 events per second. The core of track reconstruction is performed into two pipelined steps. At first step the candidate tracks are found by matching combination of low resolution hits to predefined patterns; then they are used in the second step to seed a more precise track fitting algorithm. The key FTK component is an Associative Memory (AM) system that is used to perform pattern matching with high degree of parallelism. The AM system implementation, the AM Serial Link Processor, is based on an extremely powerful network of 2 Gb/s serial links to sustain a huge traffic of data. We report on the design of the Serial Link Processor consisting of two types of boards, the Little Associative Memory Board (LAMB), a mezzan...

  8. Highly Parallelized Pattern Matching Execution for the ATLAS Experiment

    CERN Document Server

    Citraro, Saverio; The ATLAS collaboration

    2015-01-01

    Abstract– The Associative Memory (AM) system of the Fast Tracker (FTK) processor has been designed to perform pattern matching using as input the data from the silicon tracker in the ATLAS experiment. The AM is the primary component of the FTK system and is designed using ASIC technology (the AM chip) to execute pattern matching with a high degree of parallelism. The FTK system finds track candidates at low resolution that are seeds for a full resolution track fitting. The AM system implementation is named “Serial Link Processor” and is based on an extremely powerful network of 2 Gb/s serial links to sustain a huge traffic of data. This paper reports on the design of the Serial Link Processor consisting of two types of boards, the Little Associative Memory Board (LAMB), a mezzanine where the AM chips are mounted, and the Associative Memory Board (AMB), a 9U VME motherboard which hosts four LAMB daughterboards. We also report on the performance of the prototypes (both hardware and firmware) produced and ...

  9. PATTERN OF INTERSTITIAL LUNG DISEASE AS SEEN BY HIGH RESOLUTION COMPUTERISED TOMOGRAPHY.

    Science.gov (United States)

    Onyambu, C K; Waigwa, M N

    2012-09-01

    Diffuse lung diseases constitute a major cause of morbidity and mortality worldwide. High Resolution Computed Tomography (HRCT) is the recommended imaging technique in the diagnosis, assessment and followup of these diseases. To describe the pattern of HRCT findings in patients with suspected interstitial lung disease. Kenyatta National Hospital (KNH), Nairobi Hospital and MP Shah Hospital; all situated in Nairobi, during the period February to August 2010. One hundred and one patients sent for HRCT in the six month study period. A total of 101 patients were recruited with age range 18 to 100 years, with a mean age of 53.6 (SD 19.7) years and a median age of 54 years. The male-female ratio was 1.2:1. Cough [80.2% (n = 81)] was the most common presenting complaint followed by dyspnoea (53.5%, n = 53) and chest pain [24.8% (n = 25)]. Overall, the predominant pattern of involvement on chest HRCT was reticular pattern seen in 56.1% (n = 82) of patients, followed by honey-comb pattern (37.8%, n = 82). The study demonstrated marked lung parenchymal destruction in most cases; a poor prognostic indicator which could have been due to delayed referral. HRCT has a high pick up rate of subtle parenchymal lung lesions as well as defining the lesions and their distribution compared to plain chest radiography. This is important in narrowing the differential diagnosis as well as for pre-biopsy planning. The diagnosis of ILD requires a multidisciplinary approach including a detailed clinical history, physical findings, and laboratory investigations, radiological and histological assessment.

  10. Patterns and Factors of High School Dropout Risks of Racial and Linguistic Groups

    Science.gov (United States)

    Kim, Sunha; Chang, Mido; Singh, Kusum; Allen, Katherine R.

    2015-01-01

    This study examined the dropout trajectories of racial and linguistic minority students and explored the effects of students' contextual factors on their high school dropout risks. Our motivation was to identify the dropout patterns of Black, Hispanic, and Hispanic English language learner (ELL) students, who have comparatively high dropout rates,…

  11. Isolation of high quality RNA from pistachio (Pistacia vera L.) and other woody plants high in secondary metabolites.

    Science.gov (United States)

    Moazzam Jazi, Maryam; Rajaei, Saideh; Seyedi, Seyed Mahdi

    2015-10-01

    The quality and quantity of RNA are critical for successful downstream transcriptome-based studies such as microarrays and RNA sequencing (RNA-Seq). RNA isolation from woody plants, such as Pistacia vera, with very high amounts of polyphenols and polysaccharides is an enormous challenge. Here, we describe a highly efficient protocol that overcomes the limitations posed by poor quality and low yield of isolated RNA from pistachio and various recalcitrant woody plants. The key factors that resulted in a yield of 150 μg of high quality RNA per 200 mg of plant tissue include the elimination of phenol from the extraction buffer, raising the concentration of β-mercaptoethanol, long time incubation at 65 °C, and nucleic acid precipitation with optimized volume of NaCl and isopropyl alcohol. Also, the A260/A280 and A260/A230 of extracted RNA were about 1.9-2.1and 2.2-2.3, respectively, revealing the high purity. Since the isolated RNA passed highly stringent quality control standards for sensitive reactions, including RNA sequencing and real-time PCR, it can be considered as a reliable and cost-effective method for RNA extraction from woody plants.

  12. Quack: A quality assurance tool for high throughput sequence data.

    Science.gov (United States)

    Thrash, Adam; Arick, Mark; Peterson, Daniel G

    2018-05-01

    The quality of data generated by high-throughput DNA sequencing tools must be rapidly assessed in order to determine how useful the data may be in making biological discoveries; higher quality data leads to more confident results and conclusions. Due to the ever-increasing size of data sets and the importance of rapid quality assessment, tools that analyze sequencing data should quickly produce easily interpretable graphics. Quack addresses these issues by generating information-dense visualizations from FASTQ files at a speed far surpassing other publicly available quality assurance tools in a manner independent of sequencing technology. Copyright © 2018 The Authors. Published by Elsevier Inc. All rights reserved.

  13. Interstitial lung diseases with fibrosis - the pattern at high resolution

    International Nuclear Information System (INIS)

    Jarzemska, A.; Lasek, W.; Nawrocka, E.; Meder, G.; Zapala, M.

    2003-01-01

    Surgical lung biopsy, either open thoracotomy or video-assisted thoracoscopy is recommended in the diagnosis of interstitial lung diseases (ILD). In some cases, however, the repetitive pattern of radiological features in high-resolution computed tomography is often sufficient to confirm the diagnosis in a non-invasive manner. The purpose of the study was to determine whether patients with ILD can be selected on the basis of the HRCT pattern. Thin-section CT scans were performed in 40 patients with histologically proven idiopathic interstitial pneumonia (26 patients with usual interstitial pneumonia UIP, 2 patients with desquamative interstitial pneumonia DIP, 2 patients with bronchiolitis obliterans organizing pneumonia BOOP, 2 patients with non-specific interstitial pneumonia NSIP, 11 patients with hypersensitivity pneumonitis, and 3 patients with pulmonary histiocytosis X). The location and the intensity of lesions were taken into consideration. Clinical and histopathological findings were compared. HRCT features of interstitial lung diseases such as nodules and cystic spaces in hypersensitivity pneumonitis and pulmonary histiocytosis, and ground-glass opacities in idiopathic interstitial pneumonias (IIP) were statistically significant for differential diagnosis in ILD cases. Combination of honeycombing and ground-glass opacities found in UIP and nodules found in DIP were also statistically significant features in IIP subtypes diagnosis. In some cases, HRCT patterns of hypersensitivity pneumonitis, pulmonary histiocytosis X and IPF combined with clinical findings allowed for the accurate diagnosis without resorting to lung biopsy. Within a group of idiopathic interstitial pneumonia only in usual interstitial pneumonia characteristic pattern in thin-section CT can be defined. In other subgroups some typical features can imply a diagnosis. (author)

  14. [Quality of sleep and academic performance in high school students].

    Science.gov (United States)

    Bugueño, Maithe; Curihual, Carolina; Olivares, Paulina; Wallace, Josefa; López-AlegrÍa, Fanny; Rivera-López, Gonzalo; Oyanedel, Juan Carlos

    2017-09-01

    Sleeping and studying are the day-to-day activities of a teenager attending school. To determine the quality of sleep and its relationship to the academic performance among students attending morning and afternoon shifts in a public high school. Students of the first and second year of high school answered an interview about socio-demographic background, academic performance, student activities and subjective sleep quality; they were evaluated using the Pittsburgh Sleep Quality Index (PSQI). The interview was answered by 322 first year students aged 15 ± 5 years attending the morning shift and 364 second year students, aged 16 ± 0.5 years, attending the afternoon shift. The components: sleep latency, habitual sleep efficiency, sleep disturbance, drug use and daytime dysfunction were similar and classified as good in both school shifts. The components subjective sleep quality and duration of sleep had higher scores among students of the morning shift. The mean grades during the first semester of the students attending morning and afternoon shifts were 5.9 and 5.8, respectively (of a scale from 1 to 7). Among students of both shifts, the PSQI scale was associated inversely and significantly with academic performance. A bad sleep quality influences academic performance in these students.

  15. extraction of high quality dna from polysaccharides-secreting ...

    African Journals Online (AJOL)

    cistvr

    A DNA extraction method using CTAB was used for the isolation of genomic DNA from ten. Xanthomonas campestris pathovars, ten isolates of Xanthomonas albilineans and one isolate of. Pseudomonas rubrisubalbicans. High quality DNA was obtained that was ideal for molecular analy- ses. Extracellular polysaccharides ...

  16. Calculation of Debye-Scherrer diffraction patterns from highly stressed polycrystalline materials

    Energy Technology Data Exchange (ETDEWEB)

    MacDonald, M. J., E-mail: macdonm@umich.edu [Applied Physics Program, University of Michigan, Ann Arbor, Michigan 48109 (United States); SLAC National Accelerator Laboratory, Menlo Park, California 94025 (United States); Vorberger, J. [Helmholtz Zentrum Dresden-Rossendorf, 01328 Dresden (Germany); Gamboa, E. J.; Glenzer, S. H.; Fletcher, L. B. [SLAC National Accelerator Laboratory, Menlo Park, California 94025 (United States); Drake, R. P. [Climate and Space Sciences and Engineering, Applied Physics, and Physics, University of Michigan, Ann Arbor, Michigan 48109 (United States)

    2016-06-07

    Calculations of Debye-Scherrer diffraction patterns from polycrystalline materials have typically been done in the limit of small deviatoric stresses. Although these methods are well suited for experiments conducted near hydrostatic conditions, more robust models are required to diagnose the large strain anisotropies present in dynamic compression experiments. A method to predict Debye-Scherrer diffraction patterns for arbitrary strains has been presented in the Voigt (iso-strain) limit [Higginbotham, J. Appl. Phys. 115, 174906 (2014)]. Here, we present a method to calculate Debye-Scherrer diffraction patterns from highly stressed polycrystalline samples in the Reuss (iso-stress) limit. This analysis uses elastic constants to calculate lattice strains for all initial crystallite orientations, enabling elastic anisotropy and sample texture effects to be modeled directly. The effects of probing geometry, deviatoric stresses, and sample texture are demonstrated and compared to Voigt limit predictions. An example of shock-compressed polycrystalline diamond is presented to illustrate how this model can be applied and demonstrates the importance of including material strength when interpreting diffraction in dynamic compression experiments.

  17. Model-assisted template extraction SRAF application to contact holes patterns in high-end flash memory device fabrication

    Science.gov (United States)

    Seoud, Ahmed; Kim, Juhwan; Ma, Yuansheng; Jayaram, Srividya; Hong, Le; Chae, Gyu-Yeol; Lee, Jeong-Woo; Park, Dae-Jin; Yune, Hyoung-Soon; Oh, Se-Young; Park, Chan-Ha

    2018-03-01

    Sub-resolution assist feature (SRAF) insertion techniques have been effectively used for a long time now to increase process latitude in the lithography patterning process. Rule-based SRAF and model-based SRAF are complementary solutions, and each has its own benefits, depending on the objectives of applications and the criticality of the impact on manufacturing yield, efficiency, and productivity. Rule-based SRAF provides superior geometric output consistency and faster runtime performance, but the associated recipe development time can be of concern. Model-based SRAF provides better coverage for more complicated pattern structures in terms of shapes and sizes, with considerably less time required for recipe development, although consistency and performance may be impacted. In this paper, we introduce a new model-assisted template extraction (MATE) SRAF solution, which employs decision tree learning in a model-based solution to provide the benefits of both rule-based and model-based SRAF insertion approaches. The MATE solution is designed to automate the creation of rules/templates for SRAF insertion, and is based on the SRAF placement predicted by model-based solutions. The MATE SRAF recipe provides optimum lithographic quality in relation to various manufacturing aspects in a very short time, compared to traditional methods of rule optimization. Experiments were done using memory device pattern layouts to compare the MATE solution to existing model-based SRAF and pixelated SRAF approaches, based on lithographic process window quality, runtime performance, and geometric output consistency.

  18. Managing quality inside a high-technology project organization

    OpenAIRE

    Jokinen, T. (Tauno)

    2004-01-01

    Abstract This action research addresses the deployment of Total Quality Management (TQM) principles in a high-technology new product development organisation. During the period of study, the organisation grew fast. High-technology product development and hypergrowth provided a unique combination of extreme conditions for the study. The existing concepts of TQM are presented as an organised map enabling strategic analysis for an implementation plan. The history of TQM dates back to the ...

  19. High quality transportation fuels from renewable feedstock

    Energy Technology Data Exchange (ETDEWEB)

    Lindfors, Lars Peter

    2010-09-15

    Hydrotreating of vegetable oils is novel process for producing high quality renewable diesel. Hydrotreated vegetable oils (HVO) are paraffinic hydrocarbons. They are free of aromatics, have high cetane numbers and reduce emissions. HVO can be used as component or as such. HVO processes can also be modified to produce jet fuel. GHG savings by HVO use are significant compared to fossil fuels. HVO is already in commercial production. Neste Oil is producing its NExBTL diesel in two plants. Production of renewable fuels will be limited by availability of sustainable feedstock. Therefore R and D efforts are made to expand feedstock base further.

  20. Temporal Patterns in Seawater Quality from Dredging in Tropical Environments.

    Directory of Open Access Journals (Sweden)

    Ross Jones

    Full Text Available Maintenance and capital dredging represents a potential risk to tropical environments, especially in turbidity-sensitive environments such as coral reefs. There is little detailed, published observational time-series data that quantifies how dredging affects seawater quality conditions temporally and spatially. This information is needed to test realistic exposure scenarios to better understand the seawater-quality implications of dredging and ultimately to better predict and manage impacts of future projects. Using data from three recent major capital dredging programs in North Western Australia, the extent and duration of natural (baseline and dredging-related turbidity events are described over periods ranging from hours to weeks. Very close to dredging i.e. <500 m distance, a characteristic features of these particular case studies was high temporal variability. Over several hours suspended sediment concentrations (SSCs can range from 100-500 mg L-1. Less turbid conditions (10-80 mg L-1 can persist over several days but over longer periods (weeks to months averages were <10 mg L-1. During turbidity events all benthic light was sometimes extinguished, even in the shallow reefal environment, however a much more common feature was very low light 'caliginous' or daytime twilight periods. Compared to pre-dredging conditions, dredging increased the intensity, duration and frequency of the turbidity events by 10-, 5- and 3-fold respectively (at sites <500 m from dredging. However, when averaged across the entire dredging period of 80-180 weeks, turbidity values only increased by 2-3 fold above pre-dredging levels. Similarly, the upper percentile values (e.g., P99, P95 of seawater quality parameters can be highly elevated over short periods, but converge to values only marginally above baseline states over longer periods. Dredging in these studies altered the overall probability density distribution, increasing the frequency of extreme values. As

  1. Globally Stable Microresonator Turing Pattern Formation for Coherent High-Power THz Radiation On-Chip

    Science.gov (United States)

    Huang, Shu-Wei; Yang, Jinghui; Yang, Shang-Hua; Yu, Mingbin; Kwong, Dim-Lee; Zelevinsky, T.; Jarrahi, Mona; Wong, Chee Wei

    2017-10-01

    In nonlinear microresonators driven by continuous-wave (cw) lasers, Turing patterns have been studied in the formalism of the Lugiato-Lefever equation with emphasis on their high coherence and exceptional robustness against perturbations. Destabilization of Turing patterns and the transition to spatiotemporal chaos, however, limit the available energy carried in the Turing rolls and prevent further harvest of their high coherence and robustness to noise. Here, we report a novel scheme to circumvent such destabilization, by incorporating the effect of local mode hybridizations, and we attain globally stable Turing pattern formation in chip-scale nonlinear oscillators with significantly enlarged parameter space, achieving a record-high power-conversion efficiency of 45% and an elevated peak-to-valley contrast of 100. The stationary Turing pattern is discretely tunable across 430 GHz on a THz carrier, with a fractional frequency sideband nonuniformity measured at 7.3 ×10-14 . We demonstrate the simultaneous microwave and optical coherence of the Turing rolls at different evolution stages through ultrafast optical correlation techniques. The free-running Turing-roll coherence, 9 kHz in 200 ms and 160 kHz in 20 minutes, is transferred onto a plasmonic photomixer for one of the highest-power THz coherent generations at room temperature, with 1.1% optical-to-THz power conversion. Its long-term stability can be further improved by more than 2 orders of magnitude, reaching an Allan deviation of 6 ×10-10 at 100 s, with a simple computer-aided slow feedback control. The demonstrated on-chip coherent high-power Turing-THz system is promising to find applications in astrophysics, medical imaging, and wireless communications.

  2. Improving high quality, equitable maternal health services in Malawi ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Improving high quality, equitable maternal health services in Malawi (IMCHA) ... In response, the Ministry of Health implemented a Standards-Based Management and Recognition for Reproductive Health initiative to improve ... Total funding.

  3. High-Quality GaN Epilayers Achieved by Facet-Controlled Epitaxial Lateral Overgrowth on Sputtered AlN/PSS Templates.

    Science.gov (United States)

    He, Chenguang; Zhao, Wei; Zhang, Kang; He, Longfei; Wu, Hualong; Liu, Ningyang; Zhang, Shan; Liu, Xiaoyan; Chen, Zhitao

    2017-12-13

    It is widely believed that the lack of high-quality GaN wafers severely hinders the progress in GaN-based devices, especially for defect-sensitive devices. Here, low-cost AlN buffer layers were sputtered on cone-shaped patterned sapphire substrates (PSSs) to obtain high-quality GaN epilayers. Without any mask or regrowth, facet-controlled epitaxial lateral overgrowth was realized by metal-organic chemical vapor deposition. The uniform coating of the sputtered AlN buffer layer and the optimized multiple modulation guaranteed high growth selectivity and uniformity of the GaN epilayer. As a result, an extremely smooth surface was achieved with an average roughness of 0.17 nm over 3 × 3 μm 2 . It was found that the sputtered AlN buffer layer could significantly suppress dislocations on the cones. Moreover, the optimized three-dimensional growth process could effectively promote dislocation bending. Therefore, the threading dislocation density (TDD) of the GaN epilayer was reduced to 4.6 × 10 7 cm -2 , which is about an order of magnitude lower than the case of two-step GaN on the PSS. In addition, contamination and crack in the light-emitting diode fabricated on the obtained GaN were also effectively suppressed by using the sputtered AlN buffer layer. All of these advantages led to a high output power of 116 mW at 500 mA with an emission wavelength of 375 nm. This simple, yet effective growth technique is believed to have great application prospects in high-performance TDD-sensitive optoelectronic and electronic devices.

  4. High throughput electrospinning of high-quality nanofibers via an aluminum disk spinneret

    Science.gov (United States)

    Zheng, Guokuo

    In this work, a simple and efficient needleless high throughput electrospinning process using an aluminum disk spinneret with 24 holes is described. Electrospun mats produced by this setup consisted of fine fibers (nano-sized) of the highest quality while the productivity (yield) was many times that obtained from conventional single-needle electrospinning. The goal was to produce scaled-up amounts of the same or better quality nanofibers under variable concentration, voltage, and the working distance than those produced with the single needle lab setting. The fiber mats produced were either polymer or ceramic (such as molybdenum trioxide nanofibers). Through experimentation the optimum process conditions were defined to be: 24 kilovolt, a distance to collector of 15cm. More diluted solutions resulted in smaller diameter fibers. Comparing the morphologies of the nanofibers of MoO3 produced by both the traditional and the high throughput set up it was found that they were very similar. Moreover, the nanofibers production rate is nearly 10 times than that of traditional needle electrospinning. Thus, the high throughput process has the potential to become an industrial nanomanufacturing process and the materials processed by it may be used as filtration devices, in tissue engineering, and as sensors.

  5. Coupling of high-quality-factor optical resonators

    International Nuclear Information System (INIS)

    Salzenstein, Patrice; Henriet, Rémi; Coillet, Aurélien; Chembo, Yanne K; Mortier, Michel; Sérier-Brault, Hélène; Rasoloniaina, Alphonse; Dumeige, Yannick; Féron, Patrice

    2013-01-01

    We improve theoretically and experimentally the problem of the coupling between a high Q-factor resonator and its external coupler. We have observed oscillations of ringing induced by the sweeping of the excitation frequency of an active microsphere. Thanks to this approach, the quality factor of an optical resonator was measured and we obtained Q = 5.8 × 10 8 . (paper)

  6. High-picture quality industrial CT scanner

    International Nuclear Information System (INIS)

    Shoji, Takao; Nishide, Akihiko; Fujii, Masashi.

    1989-01-01

    Industrial X-ray-CT-scanners, which provide cross-sectional images of a tested sample without destroying it, are attracting attention as a new nondestructive inspection device. In 1982, Toshiba commenced the development of industrial CT scanners, and introduced the 'TOSCANER' -3000 and-4000 series. Now, the state of the art 'TOSCANER'-20000 series of CT systems has been developed incorporating the latest computer tomography and image processing technology, such as the T9506 image processor. One of the advantages of this system is its applicability to a wide range of X-ray energy . The 'TOSCANER'-20000 series can be utilized for inspecting castings and other materials with relatively low-transparency to X-rays, as well as ceramics, composite materials and other materials with high X-ray transparency. A further feature of the new system is its high-picture quality, with a high-spatial resolution resulting from a pixel size of 0.2x0.2(mm). (author)

  7. A Typology of Interactional Patterns Between Youth and Their Stepfathers: Associations with Family Relationship Quality and Youth Well-Being.

    Science.gov (United States)

    Jensen, Todd M

    2018-03-09

    Stepfamilies are an increasingly common family form, many of which are headed by a resident mother and stepfather. Stepfather-child relationships exert notable influence on stepfamily stability and individual well-being. Although various stepfather roles have been observed, more research is warranted by which stepfather-child interactions are explored holistically and across a variety of life domains (e.g., recreational, personal, academic, and disciplinary). Thus, the primary purpose of the current study is to explore varying interactional patterns between youth and their stepfathers. A latent class analysis is conducted using a representative sample of 1,183 youth (53% female; mean age = 15.64 years, SD = 1.70 years; 62% non-Hispanic White) residing in mother-stepfather families from Wave I of the National Longitudinal Study of Adolescent to Adult Health. Latent-class enumeration processes support a four-class solution, with latent classes representing inactive, academically oriented, casually connected, and versatile and involved patterns of youth-stepparent interaction. Notable differences and similarities are evident across patterns with respect to family relationship quality, youth well-being, and socio-demographic characteristics. Differences are most stark between the inactive and versatile and involved patterns. Ultimately, the results showcase notable variation in youth-stepparent interactional patterns, and one size does not necessarily fit all stepfamilies. Family practitioners should be mindful of variation in youth-stepparent interactional patterns and assist stepfamilies in seeking out stepparent-child dynamics that are most compatible with the needs and dynamics of the larger family system. © 2018 Family Process Institute.

  8. Computer-aided control of high-quality cast iron

    Directory of Open Access Journals (Sweden)

    S. Pietrowski

    2008-04-01

    Full Text Available The study discusses the possibility of control of the high-quality grey cast iron and ductile iron using the author’s genuine computer programs. The programs have been developed with the help of algorithms based on statistical relationships that are said to exist between the characteristic parameters of DTA curves and properties, like Rp0,2, Rm, A5 and HB. It has been proved that the spheroidisation and inoculation treatment of cast iron changes in an important way the characteristic parameters of DTA curves, thus enabling a control of these operations as regards their correctness and effectiveness, along with the related changes in microstructure and mechanical properties of cast iron. Moreover, some examples of statistical relationships existing between the typical properties of ductile iron and its control process were given for cases of the melts consistent and inconsistent with the adopted technology.A test stand for control of the high-quality cast iron and respective melts has been schematically depicted.

  9. Sleep patterns in high school and university students: a longitudinal study.

    Science.gov (United States)

    Urner, Martin; Tornic, Jure; Bloch, Konrad E

    2009-08-01

    We performed a longitudinal study to investigate whether changes in social zeitgebers and age alter sleep patterns in students during the transition from high school to university. Actimetry was performed on 24 high-school students (mean age+/-SD: 18.4+/-0.9 yrs; 12 females) for two weeks. Recordings were repeated in the same subjects 5 yrs later when they were university students. The sleep period duration and its center, the mid-sleep time, and total sleep time were estimated by actimetry. Actigraphic total sleep time was similar when in high school and at the university on school days (6.31+/-0.47 vs. 6.45+/-0.80 h, p = ns) and longer on leisure days by 1.10+/-1.10 h (p school days) when in high school, but not at the university. Compared to the high school situation, the mid-sleep time was delayed when at the university on school days (03:11+/-0.6 vs. 03:55+/-0.7 h, p sleep times on school and leisure days when in high school were significantly correlated with the corresponding values 5 yrs later when at the university (r = 0.58 and r = 0.55, p sleep time between school and leisure days when students attended high school and the delayed mid-sleep time on school days when students attended university are consistent with a circadian phase shift due to changes in class schedules, other zeitgebers, and lifestyle preferences. Age-related changes may also have occurred, although some individuality of the sleep pattern was maintained during the 5 yr study span. These findings have important implications for optimizing school and work schedules in students of different age and level of education.

  10. Effect of high hydrostatic pressure on overall quality parameters of watermelon juice.

    Science.gov (United States)

    Liu, Y; Zhao, X Y; Zou, L; Hu, X S

    2013-06-01

    High hydrostatic pressure as a kind of non-thermal processing might maintain the quality of thermo-sensitive watermelon juice. So, the effect of high hydrostatic pressure treatment on enzymes and quality of watermelon juice was investigated. After high hydrostatic pressure treatment, the activities of polyphenol oxidase, peroxidase, and pectin methylesterase of juice decreased significantly with the pressure (P  0.05). No significant difference was observed in lycopene and total phenolics after high hydrostatic pressure treatment when compared to the control (P > 0.05). Cloudiness and viscosity increased with pressure (P  0.05). a*- and b*-value both unchanged after high hydrostatic pressure treatment (P > 0.05) while L*-value increased but the values had no significant difference among treated juices. Browning degree after high hydrostatic pressure treatment decreased with increase in pressure and treatment time (P hydrostatic pressure had little effect on color of juice. The results of this study demonstrated the efficacy of high hydrostatic pressure in inactivating enzymes and maintaining the quality of watermelon juice.

  11. Quality-Attribute-Based Economic Valuation of Architectural Patterns

    National Research Council Canada - National Science Library

    Ozkaya, Ipek; Kazman, Rick; Klein, Mark

    2007-01-01

    .... This report makes the case that architectural patterns carry economic value, in part in the form of real options, providing software architects the right, but not the obligation, to take subsequent design actions...

  12. Radiological patterns of pulmonary tuberculosis in the paediatric age group

    International Nuclear Information System (INIS)

    Lamont, A.C.; Cremin, B.J.; Pelteret, R.M.; Cape Town Univ.

    1986-01-01

    The radiological patterns of culture-proven pulmonary tuberculosis in 154 children under the age of 14 years were studied. Good quality radiographs were an essential requirement to the study, and in cases where lymphadenopathy was in doubt, tomograms or high kV magnification films were obtained. The radiographical terms used were defined and the results of film review were analysed to show the prevalent patterns. These are summarized at the end of the article. It is felt that awareness of the radiographic patterns in paediatric pulmonary tuberculosis will be of value of those working in communities where tuberculosis is unusual or rare, in immigrant communities, and also for the investigation of children who are inadvertently exposed to the disease. (orig.)

  13. Experimental studies on improving the performance of electrochemical machining of high carbon, high chromium die steel using jet patterns

    Directory of Open Access Journals (Sweden)

    V. Sathiyamoorthy

    2014-03-01

    Full Text Available Electrochemical machining (ECM is a non-traditional process used mainly to cut hard or difficult-to-cut metals, where the application of a more traditional process is not convenient. Stiff market competition and ever-growing demand for better, durable and reliable products has brought about a material revolution, which has greatly expanded the families of difficult-to-machine materials namely highcarbon,high-chromium die steel; stainless steel and superalloys. This investigation attempts to analyze the effect of electrolyte distribution on material removal rate (MRR and surface roughness (SR on electrochemical machining of high-carbon, high-chromium die steel using NaCl aqueous solution. Three electrolyte jet patterns namely straight jet in circular, inclined jet in circular and straight jet in spiral were used for this experimentation. The results reveal that electrolyte distribution significantly improves the performance of ECM and the straight jet in spiral pattern performs satisfactorily in obtaining better MRR and surface roughness.

  14. High quality ceramic coatings sprayed by high efficiency hypersonic plasma spraying gun

    International Nuclear Information System (INIS)

    Zhu Sheng; Xu Binshi; Yao JiuKun

    2005-01-01

    This paper introduced the structure of the high efficiency hypersonic plasma spraying gun and the effects of hypersonic plasma jet on the sprayed particles. The optimised spraying process parameters for several ceramic powders such as Al 2 O 3 , Cr 2 O 3 , ZrO 2 , Cr 3 C 2 and Co-WC were listed. The properties and microstructure of the sprayed ceramic coatings were investigated. Nano Al 2 O 3 -TiO 2 ceramic coating sprayed by using the high efficiency hypersonic plasma spraying was also studied. Compared with the conventional air plasma spraying, high efficiency hypersonic plasma spraying improves greatly the ceramic coatings quality but at low cost. (orig.)

  15. High quality electron beams from a laser wakefield accelerator

    Energy Technology Data Exchange (ETDEWEB)

    Wiggins, S M; Issac, R C; Welsh, G H; Brunetti, E; Shanks, R P; Anania, M P; Cipiccia, S; Manahan, G G; Aniculaesei, C; Ersfeld, B; Islam, M R; Burgess, R T L; Vieux, G; Jaroszynski, D A [SUPA, Department of Physics, University of Strathclyde, Glasgow (United Kingdom); Gillespie, W A [SUPA, Division of Electronic Engineering and Physics, University of Dundee, Dundee (United Kingdom); MacLeod, A M [School of Computing and Creative Technologies, University of Abertay Dundee, Dundee (United Kingdom); Van der Geer, S B; De Loos, M J, E-mail: m.wiggins@phys.strath.ac.u [Pulsar Physics, Burghstraat 47, 5614 BC Eindhoven (Netherlands)

    2010-12-15

    High quality electron beams have been produced in a laser-plasma accelerator driven by femtosecond laser pulses with a peak power of 26 TW. Electrons are produced with an energy up to 150 MeV from the 2 mm gas jet accelerator and the measured rms relative energy spread is less than 1%. Shot-to-shot stability in the central energy is 3%. Pepper-pot measurements have shown that the normalized transverse emittance is {approx}1{pi} mm mrad while the beam charge is in the range 2-10 pC. The generation of high quality electron beams is understood from simulations accounting for beam loading of the wakefield accelerating structure. Experiments and self-consistent simulations indicate that the beam peak current is several kiloamperes. Efficient transportation of the beam through an undulator is simulated and progress is being made towards the realization of a compact, high peak brilliance free-electron laser operating in the vacuum ultraviolet and soft x-ray wavelength ranges.

  16. Isolation of high-quality total RNA from leaves of Myrciaria dubia "CAMU CAMU".

    Science.gov (United States)

    Gómez, Juan Carlos Castro; Reátegui, Alina Del Carmen Egoavil; Flores, Julián Torres; Saavedra, Roberson Ramírez; Ruiz, Marianela Cobos; Correa, Sixto Alfredo Imán

    2013-01-01

    Myrciaria dubia is a main source of vitamin C for people in the Amazon region. Molecular studies of M. dubia require high-quality total RNA from different tissues. So far, no protocols have been reported for total RNA isolation from leaves of this species. The objective of this research was to develop protocols for extracting high-quality total RNA from leaves of M. dubia. Total RNA was purified following two modified protocols developed for leaves of other species (by Zeng and Yang, and by Reid et al.) and one modified protocol developed for fruits of the studied species (by Silva). Quantity and quality of purified total RNA were assessed by spectrophotometric and electrophoretic analysis. Additionally, quality of total RNA was evaluated with reverse-transcription polymerase chain reaction (RT-PCR). With these three modified protocols we were able to isolate high-quality RNA (A260nm/A280nm >1.9 and A260nm/A230nm >2.0). Highest yield was produced with the Zeng and Yang modified protocol (384±46µg ARN/g fresh weight). Furthermore, electrophoretic analysis showed the integrity of isolated RNA and the absence of DNA. Another proof of the high quality of our purified RNA was the successful cDNA synthesis and amplification of a segment of the M. dubia actin 1 gene. We report three modified protocols for isolation total RNA from leaves of M. dubia. The modified protocols are easy, rapid, low in cost, and effective for high-quality and quantity total RNA isolation suitable for cDNA synthesis and polymerase chain reaction.

  17. Negative Binomial charts for monitoring high-quality processes

    NARCIS (Netherlands)

    Albers, Willem/Wim

    Good control charts for high quality processes are often based on the number of successes between failures. Geometric charts are simplest in this respect, but slow in recognizing moderately increased failure rates p. Improvement can be achieved by waiting until r > 1 failures have occurred, i.e. by

  18. Computational Analysis of G-Quadruplex Forming Sequences across Chromosomes Reveals High Density Patterns Near the Terminal Ends.

    Directory of Open Access Journals (Sweden)

    Julia H Chariker

    Full Text Available G-quadruplex structures (G4 are found throughout the human genome and are known to play a regulatory role in a variety of molecular processes. Structurally, they have many configurations and can form from one or more DNA strands. At the gene level, they regulate gene expression and protein synthesis. In this paper, chromosomal-level patterns of distribution are analyzed on the human genome to identify high-level distribution patterns potentially related to global functional processes. Here we show unique high density banding patterns on individual chromosomes that are highly correlated, appearing in a mirror pattern, across forward and reverse DNA strands. The highest density of G4 sequences occurs within four megabases of one end of most chromosomes and contains G4 motifs that bind with zinc finger proteins. These findings suggest that G4 may play a role in global chromosomal processes such as those found in meiosis.

  19. High quality mask storage in an advanced Logic-Fab

    Science.gov (United States)

    Jähnert, Carmen; Fritsche, Silvio

    2012-02-01

    High efficient mask logistics as well as safe and high quality mask storage are essential requirements within an advanced lithography area of a modern logic waferfab. Fast operational availability of the required masks at the exposure tool with excellent mask condition requires a safe mask handling, safeguarding of high mask quality over the whole mask usage time without any quality degradation and an intelligent mask logistics. One big challenge is the prevention of haze on high advanced phase shift masks used in a high volume production line for some thousands of 248nm or 193nm exposures. In 2008 Infineon Dresden qualified a customer specific developed semi-bare mask storage system from DMSDynamic Micro Systems in combination with a high advanced mask handling and an interconnected complex logistic system. This high-capacity mask storage system DMS M1900.22 for more than 3000 masks with fully automated mask and box handling as well as full-blown XCDA purge has been developed and adapted to the Infineon Lithotoollandscape using Nikon and SMIF reticle cases. Advanced features for ESD safety and mask security, mask tracking via RFID and interactions with the exposure tools were developed and implemented. The stocker is remote controlled by the iCADA-RSM system, ordering of the requested mask directly from the affected exposure tool allows fast access. This paper discusses the advantages and challenges for this approach as well as the practical experience gained during the implementation of the new system which improves the fab performance with respect to mask quality, security and throughput. Especially the realization of an extremely low and stable humidity level in addition with a well controlled air flow at each mask surface, preventing masks from haze degradation and particle contamination, turns out to be a notable technical achievement. The longterm stability of haze critical masks has been improved significantly. Relevant environmental parameters like

  20. IMPACT OF RESILIENCE, ICT SUPPORT AND QUALITY OF STUDENT'S LIFE ON QUALITY OF HIGH EDUCATION PROCESS

    Directory of Open Access Journals (Sweden)

    Zorica Lazic

    2016-12-01

    Full Text Available Answers to the questions of how and in what way the quality of life of students, resilience and ICT support affects the quality of high education we will get through this work where main objective is to define a network of processes and process management ensuring more quality and more innovative managing and service provision, therefore satisfying the needs of service users - in this case the students of the university. To collect the relevant data in the thematic analysis of this paper, the method of interviewing by questionnaires was applied. The sample survey was conducted among undergraduate students, teachers and staff of the Teacher Training Faculty in Uzice.

  1. Quality assurance in digital radiography

    International Nuclear Information System (INIS)

    Busch, H.P.; Lehmann, K.J.

    1989-01-01

    At present, there is no standard way of evaluating performance characteristics of digital radiography systems. Continuous measurements of performance parameters are necessary in order to obtain images of high quality. Parameters of quality assurance in digital radiography, which can be evaluated with simple, quick methods, are spatial resolution, low-contrast detectability, dynamic range and exposure dose. Spatial resolution was determined by a lead bar pattern, whereas the other parameters were measured by commercially available phantoms. Performance measurements of 10 digital subtraction angiography (DSA) units and one digital radiography system for unsubtracted digital radiography were assessed. From these results, recommendations for performance parameter levels will be discussed. (author)

  2. Allelic variation at Glu-1 loci and its association with grain quality of ...

    African Journals Online (AJOL)

    The high molecular weight glutenin subunits (HMW-GS) are important determinants of wheat flour quality. The HMW-GS patterns of the major released wheat cultivars in Sudan, in addition to some advanced lines, were analyzed using SDS-PAGE. The associations of the HMW-GS quality scores (Glu-1 QS) with the flour ...

  3. Patterns for election of active computing nodes in high availability distributed data acquisition systems

    International Nuclear Information System (INIS)

    Nair, Preetha; Padmini, S.; Diwakar, M.P.; Gohel, Nilesh

    2013-01-01

    Computer based systems for power plant and research reactors are expected to have high availability. Redundancy is a common approach to improve the availability of a system. In redundant configuration the challenge is to select one node as active, and in case of failure of current active node provide automatic fast switchover by electing another node to function as active and restore normal operation. Additional constraints include: exactly one node should be elected as active in an n-way redundant architecture. This paper discusses various high availability configurations developed by Electronics Division and deployed in power and research reactors and patterns followed to elect active nodes of distributed data acquisition systems. The systems are categorized into two: Active/Passive where changeover takes effect only on the failure of Active node, and Active/Active, where changeover is effective in alternate cycles. A novel concept of priority driven state based Active (Master) node election pattern is described for Active/Passive systems which allows multiple redundancy and dynamic election of single master. The paper also discusses the Active/Active pattern, which uncovers failure early by activating all the nodes alternatively in a redundant system. This pattern can be extended to multiple redundant nodes. (author)

  4. Learning Disabilities and Achieving High-Quality Education Standards

    Science.gov (United States)

    Gartland, Debi; Strosnider, Roberta

    2017-01-01

    This is an official document of the National Joint Committee on Learning Disabilities (NJCLD), of which Council for Learning Disabilities is a long-standing, active member. With this position paper, NJCLD advocates for the implementation of high-quality education standards (HQES) for students with learning disabilities (LD) and outlines the…

  5. CCD Astrophotography High-Quality Imaging from the Suburbs

    CERN Document Server

    Stuart, Adam

    2006-01-01

    This is a reference book for amateur astronomers who have become interested in CCD imaging. Those glorious astronomical images found in astronomy magazines might seem out of reach to newcomers to CCD imaging, but this is not the case. Great pictures are attainable with modest equipment. Adam Stuart’s many beautiful images, reproduced in this book, attest to the quality of – initially – a beginner’s efforts. Chilled-chip astronomical CCD-cameras and software are also wonderful tools for cutting through seemingly impenetrable light-pollution. CCD Astrophotography from the Suburbs describes one man’s successful approach to the problem of getting high-quality astronomical images under some of the most light-polluted conditions. Here is a complete and thoroughly tested program that will help every CCD-beginner to work towards digital imaging of the highest quality. It is equally useful to astronomers who have perfect observing conditions, as to those who have to observe from light-polluted city skies.

  6. High variability of dung beetle diversity patterns at four mountains of the Trans-Mexican Volcanic Belt

    Directory of Open Access Journals (Sweden)

    Alfonsina Arriaga-Jiménez

    2018-02-01

    Full Text Available Insect diversity patterns of high mountain ecosystems remain poorly studied in the tropics. Sampling dung beetles of the subfamilies Aphodiinae, Scarabaeinae, and Geotrupinae was carried out at four volcanoes in the Trans-Mexican Volcanic Belt (TMVB in the Mexican transition zone at 2,700 and 3,400 MASL, and on the windward and leeward sides. Sampling units represented a forest–shrubland–pasture (FSP mosaic typical of this mountain region. A total of 3,430 individuals of 29 dung beetle species were collected. Diversity, abundance and compositional similarity (CS displayed a high variability at all scales; elevation, cardinal direction, or FSP mosaics did not show any patterns of higher or lower values of those measures. The four mountains were different regarding dispersion patterns and taxonomic groups, both for species and individuals. Onthophagus chevrolati dominated all four mountains with an overall relative abundance of 63%. CS was not related to distance among mountains, but when O. chevrolati was excluded from the analysis, CS values based on species abundance decreased with increasing distance. Speciation, dispersion, and environmental instability are suggested as the main drivers of high mountain diversity patterns, acting together at different spatial and temporal scales. Three species new to science were collected (>10% of all species sampled. These discoveries may indicate that speciation rate is high among these volcanoes—a hypothesis that is also supported by the elevated number of collected species with a restricted montane distribution. Dispersion is an important factor in driving species composition, although naturally limited between high mountains; horizontal colonization events at different time scales may best explain the observed species composition in the TMVB, complemented by vertical colonization events to a lesser extent. Environmental instability may be the main factor causing the high variability of diversity

  7. High variability of dung beetle diversity patterns at four mountains of the Trans-Mexican Volcanic Belt.

    Science.gov (United States)

    Arriaga-Jiménez, Alfonsina; Rös, Matthias; Halffter, Gonzalo

    2018-01-01

    Insect diversity patterns of high mountain ecosystems remain poorly studied in the tropics. Sampling dung beetles of the subfamilies Aphodiinae, Scarabaeinae, and Geotrupinae was carried out at four volcanoes in the Trans-Mexican Volcanic Belt (TMVB) in the Mexican transition zone at 2,700 and 3,400 MASL, and on the windward and leeward sides. Sampling units represented a forest-shrubland-pasture (FSP) mosaic typical of this mountain region. A total of 3,430 individuals of 29 dung beetle species were collected. Diversity, abundance and compositional similarity (CS) displayed a high variability at all scales; elevation, cardinal direction, or FSP mosaics did not show any patterns of higher or lower values of those measures. The four mountains were different regarding dispersion patterns and taxonomic groups, both for species and individuals. Onthophagus chevrolati dominated all four mountains with an overall relative abundance of 63%. CS was not related to distance among mountains, but when O. chevrolati was excluded from the analysis, CS values based on species abundance decreased with increasing distance. Speciation, dispersion, and environmental instability are suggested as the main drivers of high mountain diversity patterns, acting together at different spatial and temporal scales. Three species new to science were collected (>10% of all species sampled). These discoveries may indicate that speciation rate is high among these volcanoes-a hypothesis that is also supported by the elevated number of collected species with a restricted montane distribution. Dispersion is an important factor in driving species composition, although naturally limited between high mountains; horizontal colonization events at different time scales may best explain the observed species composition in the TMVB, complemented by vertical colonization events to a lesser extent. Environmental instability may be the main factor causing the high variability of diversity and abundance patterns

  8. Correlates of food patterns in young Latino children at high risk of obesity.

    Science.gov (United States)

    Kaiser, Lucia L; Aguilera, Alberto L; Horowitz, Marcel; Lamp, Catherine; Johns, Margaret; Gomez-Camacho, Rosa; Ontai, Lenna; de la Torre, Adela

    2015-11-01

    The present paper examines the influence of age and gender on food patterns of Latino children. Data are from baseline of a 5-year, quasi-experimental obesity prevention study: Niños Sanos, Familia Sana (NSFS; Healthy Children, Healthy Families). In 2012, the researchers interviewed Latino parents, using a thirty-item questionnaire to ask about their children's food consumption and feeding practices. Statistical tests included t tests and ANCOVA. Rural communities in California's Central Valley, USA. Two hundred and seventeen parents (87-89% born in Mexico) and their children (aged 2-8 years). Fifty-one per cent of the children were overweight or obese (≥85th percentile of BMI for age and gender). Mean BMI Z-scores were not significantly different in boys (1·10 (SD 1·07)) and girls (0·92 (SD 1·04); P=0·12). In bivariate analysis, children aged 2-4 years consumed fast and convenience foods less often (P=0·04) and WIC (Supplemental Nutrition Program for Women, Infants, and Children)-allowable foods more often than children aged 5-8 years (P=0·01). In ANCOVA, neither age nor gender was significantly related to food patterns. Mother's acculturation level was positively related to children's consumption of fast and convenience foods (P=0·0002) and negatively related to consumption of WIC foods (P=0·01). Providing role modelling and structure in scheduling meals and snacks had a positive effect on the vegetable pattern (P=0·0007), whereas meal skipping was associated with more frequent fast and convenience food consumption (P=0·04). Acculturation and child feeding practices jointly influence food patterns in Latino immigrant children and indicate a need for interventions that maintain diet quality as children transition to school.

  9. Patterning solution-processed organic single-crystal transistors with high device performance

    Directory of Open Access Journals (Sweden)

    Yun Li

    2011-06-01

    Full Text Available We report on the patterning of organic single-crystal transistors with high device performance fabricated via a solution process under ambient conditions. The semiconductor was patterned on substrates via surface selective deposition. Subsequently, solvent-vapor annealing was performed to reorganize the semiconductor into single crystals. The transistors exhibited field-effect mobility (μFET of up to 3.5 cm2/V s. Good reliability under bias-stress conditions indicates low density of intrinsic defects in crystals and low density of traps at the active interfaces. Furthermore, the Y function method clearly suggests that the variation of μFET of organic crystal transistors was caused by contact resistance. Further improvement of the device with higher μFET with smaller variation can be expected when lower and more uniform contact resistance is achieved.

  10. The influence of knowledge management implementation toward the quality of high schools

    Directory of Open Access Journals (Sweden)

    Hilda Ainissyifa

    2012-09-01

    Full Text Available The purpose of this study is to analyze the influence of knowledge management implementation toward the quality of high schools. This study was conducted among five high schools under an education foundation. The analysis models used in the study were correlation analysis and t-test. The respondents were used as the profession references are 86 teachers. The result of the study shows that knowledge management implementation has a positive and significant influence toward the quality of high schools.

  11. Boiling curve in high quality flow boiling

    International Nuclear Information System (INIS)

    Shiralkar, B.S.; Hein, R.A.; Yadigaroglu, G.

    1980-01-01

    The post dry-out heat transfer regime of the flow boiling curve was investigated experimentally for high pressure water at high qualities. The test section was a short round tube located downstream of a hot patch created by a temperature controlled segment of tubing. Results from the experiment showed that the distance from the dryout point has a significant effect on the downstream temperatures and there was no unique boiling curve. The heat transfer coefficients measured sufficiently downstream of the dryout point could be correlated using the Heineman correlation for superheated steam, indicating that the droplet deposition effects could be neglected in this region

  12. Spatial and temporal patterns of dissolved organic matter quantity and quality in the Mississippi River Basin, 1997–2013

    Science.gov (United States)

    Stackpoole, Sarah M.; Stets, Edward G.; Clow, David W.; Burns, Douglas A.; Aiken, George R.; Aulenbach, Brent T.; Creed, Irena F.; Hirsch, Robert M.; Laudon, Hjalmar; Pellerin, Brian; Striegl, Robert G.

    2017-01-01

    Recent studies have found insignificant or decreasing trends in time-series dissolved organic carbon (DOC) datasets, questioning the assumption that long-term DOC concentrations in surface waters are increasing in response to anthropogenic forcing, including climate change, land use, and atmospheric acid deposition. We used the weighted regressions on time, discharge, and season (WRTDS) model to estimate annual flow-normalized concentrations and fluxes to determine if changes in DOC quantity and quality signal anthropogenic forcing at 10 locations in the Mississippi River Basin. Despite increases in agriculture and urban development throughout the basin, net increases in DOC concentration and flux were significant at only 3 of 10 sites from 1997 to 2013 and ranged between −3.5% to +18% and −0.1 to 19%, respectively. Positive shifts in DOC quality, characterized by increasing specific ultraviolet absorbance at 254 nm, ranged between +8% and +45%, but only occurred at one of the sites with significant DOC quantity increases. Basinwide reductions in atmospheric sulfate deposition did not result in large increases in DOC either, likely because of the high buffering capacity of the soil. Hydroclimatic factors including annual discharge, precipitation, and temperature did not significantly change during the 17-year timespan of this study, which contrasts with results from previous studies showing significant increases in precipitation and discharge over a century time scale. Our study also contrasts with those from smaller catchments, which have shown stronger DOC responses to climate, land use, and acidic deposition. This temporal and spatial analysis indicated that there was a potential change in DOC sources in the Mississippi River Basin between 1997 and 2013. However, the overall magnitude of DOC trends was not large, and the pattern in quantity and quality increases for the 10 study sites was not consistent throughout the basin.

  13. CBE growth of high-quality ZnO epitaxial layers

    Energy Technology Data Exchange (ETDEWEB)

    El-Shaer, A.; Bakin, A.; Mofor, A.C.; Kreye, M.; Waag, A. [Institute of Semiconductor Technology, Technical University Braunschweig, Hans-Sommer-Strasse 66, 38106 Braunschweig (Germany); Blaesing, J.; Krost, A. [Institute of Experimental Physics, Otto-von-Guericke-University Magdeburg (Germany); Stoimenos, J. [Physics Department, Aristotele University, Univ. Campus, 54006 Thessaloniki (Greece); Pecz, B. [Research Institute for Technical Physics and Materials Science, Hungarian Academy of Sciences, P.O. Box 49, 1525 Budapest (Hungary); Heuken, M. [Aixtron AG, Kackertstr. 15-17, 52072 Aachen (Germany)

    2006-03-15

    Further improvements on the recently reported novel approach to zinc oxide Chemical Beam Epitaxy (CBE) are presented. Hydrogen peroxide is employed as a very efficient novel oxidant. ZnO layers with a thickness from 100 nm to 600 nm were grown on c-sapphire using a MgO buffer. PL-mapping as well as conductivity mapping shows a good uniformity across the 2 inch ZnO-on-sapphire epiwafers. The measured surface roughness for the best layers is as low as 0.26 nm. HRXRD measurements of the obtained ZnO layers show excellent quality of the single crystalline ZnO. The FWHM of the HRXRD (0002) rocking curves measured for the 2 inch ZnO-on-sapphire wafers is as low as 27 arcsec with a very high lateral homogeneity across the whole wafer. Plane view HRTEM observations reveal the very good quality of the ZnO films. The results indicate that CBE is a suitable technique to fabricate ZnO of very high structural quality, which can eventually be used as an alternative to bulk ZnO substrates. (copyright 2006 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  14. Sleep Pattern, Duration and Quality in Relation with Glycemic Control in People with Type 2 Diabetes Mellitus

    Directory of Open Access Journals (Sweden)

    Mohammad Hossein Gozashti

    2016-11-01

    Full Text Available Sleep disturbances have been shown to be associated with diabetes control, but the relation between planned wakings or napping with glycemic indices has not been evaluated yet. This study evaluated the relation between sleep quality, duration, and pattern, including daytime napping of people with diabetes and their glycemic control. A cross-sectional correlation research design was used for this study. We enrolled 118 people with type 2 diabetes receiving oral agents without major complications at the Shahid Bahonar Center, Kerman. The age, weight, height, serum HbA1c, as well as other glycemic indices and lipid profile were measured. BMI was also calculated. All participants were requested to fill in the Pittsburgh Sleep Quality Index (PSQI questionnaire to evaluate their sleep quality. In addition, they were inquired about their sleep schedule during day and night. Pearson correlation and multiple regression analyses were conducted to examine the correlation between HbA1c and sleep pattern variables. The variables were also compared between participants with or without napping using t-test. All analyses were performed with the SPSS version 19 (SPSS, Chicago, IL, USA. The mean age was 58±11 years and mean HbA1c (% was 7.8±11 (62±13 mmol/mol. Sleep duration and the number of sleep segments significantly predicted HbA1c (F (2,114=5.232, P=0.007, R2=0.084. A one-hour increment in sleep duration was associated with a 0.174% (1.4 mmol/mol decrement in HbA1c. PSQI score did not contribute to the regression model. Moreover, participants who napped (66% had a lower HbA1c (7.6±1 compared to others (8.1±1.3 (P=0.04. We concluded that napping and segmented sleep are associated with a better glycemic control in type 2 diabetes and there is a linear correlation between sleep duration and better glycemic control.

  15. Sleep Pattern, Duration and Quality in Relation with Glycemic Control in People with Type 2 Diabetes Mellitus.

    Science.gov (United States)

    Gozashti, Mohammad Hossein; Eslami, Nazanin; Radfar, Mohammad Hadi; Pakmanesh, Hamid

    2016-11-01

    Sleep disturbances have been shown to be associated with diabetes control, but the relation between planned wakings or napping with glycemic indices has not been evaluated yet. This study evaluated the relation between sleep quality, duration, and pattern, including daytime napping of people with diabetes and their glycemic control. A cross-sectional correlation research design was used for this study. We enrolled 118 people with type 2 diabetes receiving oral agents without major complications at the Shahid Bahonar Center, Kerman. The age, weight, height, serum HbA1c, as well as other glycemic indices and lipid profile were measured. BMI was also calculated. All participants were requested to fill in the Pittsburgh Sleep Quality Index (PSQI) questionnaire to evaluate their sleep quality. In addition, they were inquired about their sleep schedule during day and night. Pearson correlation and multiple regression analyses were conducted to examine the correlation between HbA1c and sleep pattern variables. The variables were also compared between participants with or without napping using t-test. All analyses were performed with the SPSS version 19 (SPSS, Chicago, IL, USA). The mean age was 58±11 years and mean HbA1c (%) was 7.8±11 (62±13 mmol/mol). Sleep duration and the number of sleep segments significantly predicted HbA1c (F (2,114)=5.232, P=0.007, R2=0.084). A one-hour increment in sleep duration was associated with a 0.174% (1.4 mmol/mol) decrement in HbA1c. PSQI score did not contribute to the regression model. Moreover, participants who napped (66%) had a lower HbA1c (7.6±1) compared to others (8.1±1.3) (P=0.04). We concluded that napping and segmented sleep are associated with a better glycemic control in type 2 diabetes and there is a linear correlation between sleep duration and better glycemic control.

  16. High quality factor GaAs microcavity with buried bullseye defects

    DEFF Research Database (Denmark)

    Winkler, K.; Gregersen, Niels; Hayrynen, T.

    2018-01-01

    The development of high quality factor solid-state microcavities with low mode volumes has paved the way towards on-chip cavity quantum electrodynamics experiments and the development of high-performance nanophotonic devices. Here, we report on the implementation of a new kind of solid...

  17. Low-cost high-quality crystalline germanium based flexible devices

    KAUST Repository

    Nassar, Joanna M.

    2014-06-16

    High performance flexible electronics promise innovative future technology for various interactive applications for the pursuit of low-cost, light-weight, and multi-functional devices. Thus, here we show a complementary metal oxide semiconductor (CMOS) compatible fabrication of flexible metal-oxide-semiconductor capacitors (MOSCAPs) with high-κ/metal gate stack, using a physical vapor deposition (PVD) cost-effective technique to obtain a high-quality Ge channel. We report outstanding bending radius ~1.25 mm and semi-transparency of 30%.

  18. Low-cost high-quality crystalline germanium based flexible devices

    KAUST Repository

    Nassar, Joanna M.; Hussain, Aftab M.; Rojas, Jhonathan Prieto; Hussain, Muhammad Mustafa

    2014-01-01

    High performance flexible electronics promise innovative future technology for various interactive applications for the pursuit of low-cost, light-weight, and multi-functional devices. Thus, here we show a complementary metal oxide semiconductor (CMOS) compatible fabrication of flexible metal-oxide-semiconductor capacitors (MOSCAPs) with high-κ/metal gate stack, using a physical vapor deposition (PVD) cost-effective technique to obtain a high-quality Ge channel. We report outstanding bending radius ~1.25 mm and semi-transparency of 30%.

  19. Food patterns and dietary quality associated with organic food consumption during pregnancy; data from a large cohort of pregnant women in Norway

    Directory of Open Access Journals (Sweden)

    Torjusen Hanne

    2012-08-01

    Full Text Available Abstract Background Little is known about the consumption of organic food during pregnancy. The aim of this study was to describe dietary characteristics associated with frequent consumption of organic food among pregnant women participating in the Norwegian Mother and Child Cohort Study (MoBa. Methods The present study includes 63 808 women who during the years 2002–2007 answered two questionnaires, a general health questionnaire at gestational weeks 15 and a food frequency questionnaire at weeks 17-22. The exploration of food patterns by Principal component analyses (PCA was followed by ANOVA analyses investigating how these food patterns as well as intake of selected food groups were associated with consumption of organic food. Results The first principal component (PC1 identified by PCA, accounting for 12% of the variation, was interpreted as a ‘health and sustainability component’, with high positive loadings for vegetables, fruit and berries, cooking oil, whole grain bread and cereal products and negative loadings for meat, including processed meat, white bread, and cakes and sweets. Frequent consumption of organic food, which was reported among 9.1% of participants (n = 5786, was associated with increased scores on the ‘health and sustainability component’ (p  Conclusion The present study showed that pregnant Norwegian women reporting frequent consumption of organically produced food had dietary pattern and quality more in line with public advice for healthy and sustainable diets. A methodological implication is that the overall diet needs to be included in future studies of potential health outcomes related to consumption of organic food during pregnancy.

  20. High-quality GaN epitaxially grown on Si substrate with serpentine channels

    Science.gov (United States)

    Wei, Tiantian; Zong, Hua; Jiang, Shengxiang; Yang, Yue; Liao, Hui; Xie, Yahong; Wang, Wenjie; Li, Junze; Tang, Jun; Hu, Xiaodong

    2018-06-01

    A novel serpentine-channeled mask was introduced to Si substrate for low-dislocation GaN epitaxial growth and the fully coalesced GaN film on the masked Si substrate was achieved for the first time. Compared with the epitaxial lateral overgrowth (ELOG) growth method, this innovative mask only requires one-step epitaxial growth of GaN which has only one high-dislocation region per mask opening. This new growth method can effectively reduce dislocation density, thus improving the quality of GaN significantly. High-quality GaN with low dislocation density ∼2.4 × 107 cm-2 was obtained, which accounted for about eighty percent of the GaN film in area. This innovative technique is promising for the growth of high-quality GaN templates and the subsequent fabrication of high-performance GaN-based devices like transistors, laser diodes (LDs), and light-emitting diodes (LEDs) on Si substrate.

  1. Extreme ultraviolet patterning of tin-oxo cages

    Science.gov (United States)

    Haitjema, Jarich; Zhang, Yu; Vockenhuber, Michaela; Kazazis, Dimitrios; Ekinci, Yasin; Brouwer, Albert M.

    2017-07-01

    We report on the extreme ultraviolet (EUV) patterning performance of tin-oxo cages. These cage molecules were already known to function as a negative tone photoresist for EUV radiation, but in this work, we significantly optimized their performance. Our results show that sensitivity and resolution are only meaningful photoresist parameters if the process conditions are optimized. We focus on contrast curves of the materials using large area EUV exposures and patterning of the cages using EUV interference lithography. It is shown that baking steps, such as postexposure baking, can significantly affect both the sensitivity and contrast in the open-frame experiments as well as the patterning experiments. A layer thickness increase reduced the necessary dose to induce a solubility change but decreased the patterning quality. The patterning experiments were affected by minor changes in processing conditions such as an increased rinsing time. In addition, we show that the anions of the cage can influence the sensitivity and quality of the patterning, probably through their effect on physical properties of the materials.

  2. Study on quality assurance for high-level radioactive waste disposal project

    International Nuclear Information System (INIS)

    Takada, Susumu

    2005-01-01

    The U.S. Department of Energy (DOE) has developed comparatively detailed quality assurance requirements for the high-level radioactive waste disposal systems. Quality assurance is recognized as a key issue for confidence building and smooth implementation of the HLW program in Japan, and Japan is at an initial phase of repository development. Then the quality assurance requirements at site research and site selection, site characterization, and site suitability analysis used in the Yucca Mountain project were examined in detail and comprehensive descriptions were developed using flow charts. Additionally, the applicability to the Japan high-level radioactive waste disposal project was studied. The examination and study were performed for the following QA requirements: The requirements that have the relative importance at site research and site selection, site characterization, and site suitability analysis (such as planning and performing scientific investigations, sample control, data control, model development and use, technical report review, software control, and control of the electric management of data). The requirements that have the relative importance at the whole repository phases (such as quality assurance program, document control, and control of quality assurance records). (author)

  3. Effect of high-oxygen and high-carbon-dioxide atmospheres on strawberry flavor and other quality traits.

    Science.gov (United States)

    Pérez, A G; Sanz, C

    2001-05-01

    The effect of high-oxygen atmospheres on strawberry flavor was studied. Strawberry fruits (Fragariax ananassa Duch. cv. Camarosa) were stored at 8 degrees C in four different atmospheres: air, 5% O(2)/20% CO(2), 80% O(2)/20% CO(2), and 90% O(2)/10% CO(2). Changes in several quality parameters were evaluated. Atmospheres combining high O(2) and high CO(2) were the most effective in preventing fungal growth and enhancing strawberry firmness. Other quality parameters such as color, titrable acidity, sugars and organic acids distribution, off-flavor development, and aroma were only mildly affected by superatmospheric O(2) levels. After one week of storage, unexpected high contents of off-flavor related compounds were found in the 80% O(2)/20% CO(2) and 90% O(2)/10% CO(2) atmospheres. Evidence of an altered ester biosynthesis was also found in fruits stored under these high-O(2) atmospheres. Data obtained suggest that stress induced by high CO(2) and stress induced by high O(2) have an additive effect on strawberry flavor alteration.

  4. A safe inexpensive method to isolate high quality plant and fungal ...

    African Journals Online (AJOL)

    STORAGESEVER

    2008-08-18

    Aug 18, 2008 ... quality DNA from plant and fungal species. This method uses potassium acetate to remove proteins and polysaccharides in an SDS extraction buffer. Further DNA purification is achieved using a low salt. CTAB treatment. This SDS/CTAB protocol was used to isolate high quality genomic DNA subject to.

  5. Use of Sine Shaped High-Frequency Rhythmic Visual Stimuli Patterns for SSVEP Response Analysis and Fatigue Rate Evaluation in Normal Subjects.

    Science.gov (United States)

    Keihani, Ahmadreza; Shirzhiyan, Zahra; Farahi, Morteza; Shamsi, Elham; Mahnam, Amin; Makkiabadi, Bahador; Haidari, Mohsen R; Jafari, Amir H

    2018-01-01

    Background: Recent EEG-SSVEP signal based BCI studies have used high frequency square pulse visual stimuli to reduce subjective fatigue. However, the effect of total harmonic distortion (THD) has not been considered. Compared to CRT and LCD monitors, LED screen displays high-frequency wave with better refresh rate. In this study, we present high frequency sine wave simple and rhythmic patterns with low THD rate by LED to analyze SSVEP responses and evaluate subjective fatigue in normal subjects. Materials and Methods: We used patterns of 3-sequence high-frequency sine waves (25, 30, and 35 Hz) to design our visual stimuli. Nine stimuli patterns, 3 simple (repetition of each of above 3 frequencies e.g., P25-25-25) and 6 rhythmic (all of the frequencies in 6 different sequences e.g., P25-30-35) were chosen. A hardware setup with low THD rate ( 90% for CCA and LASSO (for TWs > 1 s). High frequency rhythmic patterns group with low THD rate showed higher accuracy rate (99.24%) than simple patterns group (98.48%). Repeated measure ANOVA showed significant difference between rhythmic pattern features ( P rhythmic [3.85 ± 2.13] compared to the simple patterns group [3.96 ± 2.21], ( P = 0.63). Rhythmic group had lower within group VAS variation (min = P25-30-35 [2.90 ± 2.45], max = P35-25-30 [4.81 ± 2.65]) as well as least individual pattern VAS (P25-30-35). Discussion and Conclusion: Overall, rhythmic and simple pattern groups had higher and similar accuracy rates. Rhythmic stimuli patterns showed insignificantly lower fatigue rate than simple patterns. We conclude that both rhythmic and simple visual high frequency sine wave stimuli require further research for human subject SSVEP-BCI studies.

  6. Switching field distribution and magnetization reversal process of FePt dot patterns

    Energy Technology Data Exchange (ETDEWEB)

    Ishio, S., E-mail: ishio@gipc.akita-u.ac.jp [Department of Materials Science and Engineering, Akita University, Akita 010-8502 (Japan); Takahashi, S.; Hasegawa, T.; Arakawa, A.; Sasaki, H. [Department of Materials Science and Engineering, Akita University, Akita 010-8502 (Japan); Yan, Z.; Liu, X. [Venture Business Laboratory, Akita University, Tegata Gakuen-machi, Akita 010-8502 (Japan); Kondo, Y.; Yamane, H.; Ariake, J. [Akita Prefectural R and D Center, 4-21 Sanuki, Akita 010-1623 (Japan); Suzuki, M.; Kawamura, N.; Mizumaki, M. [Japan Synchrotron Radiation Research Institute, 1-1-1, Kouto, Sayo-cho, Sayo-gun, Hyogo 679-5198 (Japan)

    2014-06-01

    The fabrication of FePt nanodots with a high structural quality and the control of their switching fields are key issues in realizing high density bit pattern recording. We have prepared FePt dot patterns for dots with 15–300 nm diameters by electron beam lithography and re-annealing, and studied the relation between magnetization reversal process and structure of FePt nanodots. The switching field (H{sub sw}) of dot patterns re-annealed at 710 °C for 240 min showed a bimodal distribution, where a higher peak was found at 5–6 T, and a lower peak was found at ∼2 T. It was revealed by cross-sectional TEM analysis that the structure of dots in the pattern can be classified into two groups. One group has a high degree of order with well-defined [0 0 1] crystalline growth, and the other group includes structurally-disturbed dots like [1 1 1] growth and twin crystals. This structural inhomogeneity causes the magnetic switching field distribution observed. - Highlights: • FePt dot patterns with 15–100 nm dot diameters were prepared by EB lithography. • Maximum coercivity of 30 kOe was found in the dot pattern with 30 nm in diameter. • Magnetization reversal was studied on the base of TEM analysis and LLG simulation.

  7. Perceived parenting styles, personality traits and sleep patterns in adolescents.

    Science.gov (United States)

    Brand, Serge; Hatzinger, Martin; Beck, Johannes; Holsboer-Trachsler, Edith

    2009-10-01

    The present study examined the role of parenting styles with respect to adolescents' sleep patterns and symptoms of depression and anxiety. A total of 246 adolescents (age: 17.58+/-1.62) took part in the study. They completed several questionnaires with regard to parenting styles and to symptoms of anxiety and depression; additionally, they filled in a questionnaire assessing sleep-related personality traits and completed a sleep log for 7 consecutive days. Results showed a high overlap between parenting styles of both parents, though with a different relation to adolescents' sleep. Adverse parenting styles were highly correlated with low sleep quality, negative mood, increased daytime sleepiness, and with increased symptoms of anxiety and depression. Adolescents with low positive and high negative parenting styles displayed the most unfavorable sleep-related personality traits. Results suggest that parenting styles are related to young people's sleep pattern even at the beginning of late adolescence.

  8. Wellbeing Understanding in High Quality Healthcare Informatics and Telepractice.

    Science.gov (United States)

    Fiorini, Rodolfo A; De Giacomo, Piero; L'Abate, Luciano

    2016-01-01

    The proper use of healthcare informatics technology and multidimensional conceptual clarity are fundamental to create and boost outstanding clinical and telepractice results. Avoiding even terminology ambiguities is mandatory for high quality of care service. For instance, well-being or wellbeing is a different way to write the same concept only, or there is a good deal of ambiguity around the meanings of these terms the way they are written. In personal health, healthcare and healthcare informatics, this kind of ambiguity and lack of conceptual clarity has been called out repeatedly over the past 50 years. It is time to get the right, terse scenario. We present a brief review to develop and achieve ultimate wellbeing understanding for practical high quality healthcare informatics and telepractice application. This article presents an innovative point of view on deeper wellbeing understanding towards its increased clinical effective application.

  9. Construction of High-Quality Camel Immune Antibody Libraries.

    Science.gov (United States)

    Romão, Ema; Poignavent, Vianney; Vincke, Cécile; Ritzenthaler, Christophe; Muyldermans, Serge; Monsion, Baptiste

    2018-01-01

    Single-domain antibodies libraries of heavy-chain only immunoglobulins from camelids or shark are enriched for high-affinity antigen-specific binders by a short in vivo immunization. Thus, potent binders are readily retrieved from relatively small-sized libraries of 10 7 -10 8 individual transformants, mostly after phage display and panning on a purified target. However, the remaining drawback of this strategy arises from the need to generate a dedicated library, for nearly every envisaged target. Therefore, all the procedures that shorten and facilitate the construction of an immune library of best possible quality are definitely a step forward. In this chapter, we provide the protocol to generate a high-quality immune VHH library using the Golden Gate Cloning strategy employing an adapted phage display vector where a lethal ccdB gene has to be substituted by the VHH gene. With this procedure, the construction of the library can be shortened to less than a week starting from bleeding the animal. Our libraries exceed 10 8 individual transformants and close to 100% of the clones harbor a phage display vector having an insert with the length of a VHH gene. These libraries are also more economic to make than previous standard approaches using classical restriction enzymes and ligations. The quality of the Nanobodies that are retrieved from immune libraries obtained by Golden Gate Cloning is identical to those from immune libraries made according to the classical procedure.

  10. River-floodplain Hydrologic Connectivity: Impact on Temporal and Spatial Floodplain Water Quality and Productivity Patterns

    Science.gov (United States)

    Gallo, E. L.; Ahearn, D.; Dahlgren, R. A.; Grosholz, E.

    2003-12-01

    Nutrient spiraling and cycling are critical processes for floodplain systems, but these have not been well studied in western North America. Floodplain production and function relies on the integrity of river-floodplain interactions, particularly during periods of hydrologic connectivity. The purpose of this study was to: (1) determine the importance of the timing and duration of river-floodplain hydrologic connectivity, (2) link flood event water quality to subsequent primary and secondary production, and (3) identify temporal and spatial patterns of floodplain production. The Cosumnes River watershed transports surface runoff and snowmelt from the Sierra Nevadas to the Sacramento-San Joaquin Delta. It is one of the few watersheds in California that has no major water diversions or impoundments; therefore the river responds to the natural watershed hydrology. The study site in southern Sacramento County is an unmanaged experimental floodplain, one of the few remaining floodplains in California. Weekly and flood-event water quality and macroinvertebrate sampling was conducted during the flood season from January through June in 2001 and 2002. Both water years were characterized by historically low river flows. On average, volatile suspended solids in the water column increased from 5 mg/l to 10 mg/l during early season periods of hydrologic connectivity (December - February), suggesting that during watershed flushing flood events, the river acts as a source of nutrients and organic matter to the floodplain. Following a flood event, invertebrate concentrations decreased on average from 26,000 individuals/m3 to 9,000 individuals/m3 for zooplankton and from 350 individuals/m2 to 65 individuals/m2 for benthic macro-invertebrate, suggesting a net dilution of invertebrates during flood events. Chlorophyll a (chl-a) levels were also diluted during flood events, on average from 25 ppb to 5 ppb. Zooplankton densities and chl-a levels quickly rose after flood events. On

  11. Air Quality Standards for Particulate Matter (PM) at high altitude cities

    International Nuclear Information System (INIS)

    Bravo Alvarez, H.; Sosa Echeverria, R.; Sanchez Alvarez, P.; Krupa, S.

    2013-01-01

    The Air Quality Standards for Particulate Matter (PM) at high altitude urban areas in different countries, must consider the pressure and temperature due to the effect that these parameters have on the breath volume. This paper shows the importance to correct Air Quality Standards for PM considering pressure and temperature at different altitudes. Specific factors were suggested to convert the information concerning PM, from local to standard conditions, and adjust the Air Quality Standards for different high altitudes cities. The correction factors ranged from: 1.03 for Santiago de Chile to 1.47 for El Alto Bolivia. Other cities in this study include: Mexico City, México; La Paz, Bolivia; Bogota, Cali and Medellin, Colombia; Quito, Ecuador and Cuzco, Peru. If these corrections are not considered, the atmospheric concentrations will be underestimated. - Highlights: ► AQS for particulate matter concentrations adjusted by pressure and temperature. ► Particulate matter concentrations can be underestimated in high altitude Cities. ► Particulate matter concentrations must be compared under the same conditions. - In order to compare high altitude atmospheric PM concentrations with AQS, one must consider T and P of the sampling site.

  12. Synthesis of freeform refractive surfaces forming various radiation patterns using interpolation

    Science.gov (United States)

    Voznesenskaya, Anna; Mazur, Iana; Krizskiy, Pavel

    2017-09-01

    Optical freeform surfaces are very popular today in such fields as lighting systems, sensors, photovoltaic concentrators, and others. The application of such surfaces allows to obtain systems with a new quality with a reduced number of optical components to ensure high consumer characteristics: small size, weight, high optical transmittance. This article presents the methods of synthesis of refractive surface for a given source and the radiation pattern of various shapes using a computer simulation cubic spline interpolation.

  13. Providing high-quality care in primary care settings: how to make trade-offs.

    Science.gov (United States)

    Beaulieu, Marie-Dominique; Geneau, Robert; Del Grande, Claudio; Denis, Jean-Louis; Hudon, Eveline; Haggerty, Jeannie L; Bonin, Lucie; Duplain, Réjean; Goudreau, Johanne; Hogg, William

    2014-05-01

    To gain a deeper understanding of how primary care (PC) practices belonging to different models manage resources to provide high-quality care. Multiple-case study embedded in a cross-sectional study of a random sample of 37 practices. Three regions of Quebec. Health care professionals and staff of 5 PC practices. Five cases showing above-average results on quality-of-care indicators were purposefully selected to contrast on region, practice size, and PC model. Data were collected using an organizational questionnaire; the Team Climate Inventory, which was completed by health care professionals and staff; and 33 individual interviews. Detailed case histories were written and thematic analysis was performed. The core common feature of these practices was their ongoing effort to make trade-offs to deliver services that met their vision of high-quality care. These compromises involved the same 3 areas, but to varying degrees depending on clinic characteristics: developing a shared vision of high-quality care; aligning resource use with that vision; and balancing professional aspirations and population needs. The leadership of the physician lead was crucial. The external environment was perceived as a source of pressure and dilemmas rather than as a source of support in these matters. Irrespective of their models, PC practices' pursuit of high-quality care is based on a vision in which accessibility is a key component, balanced by appropriate management of available resources and of external environment expectations. Current PC reforms often create tensions rather than support PC practices in their pursuit of high-quality care. Copyright© the College of Family Physicians of Canada.

  14. Urban public health assessment and pattern analysis: comparison of four cities in different countries

    Science.gov (United States)

    Su, Meirong; Chen, Chen; Lu, Weiwei; Liu, Gengyuan; Yang, Zhifeng; Chen, Bin

    2013-06-01

    Urban public health is an important global issue, and receives extensive attention. It is necessary to compare urban public health status among different cities, so that each city can define its own health patterns and limiting factors. The following assessment indicators were established to evaluate urban public health status: living conditions, physical health, education and culture, environmental quality, and social security. A weighted-sum model was used in combination with these indicators to compare the urban public health status in four cities—Beijing, New York, London, and Tokyo—using data for 2000-2009. Although the urban public health level of Beijing was lower than that of the other cities, it showed the greatest increase in this level over the study period. Different patterns of urban public health were identified: London had the most balanced, steady pattern (almost all factors performed well and developed stably); New York and Tokyo showed balanced, but unsteady patterns (most factors remained high, though social security and environmental quality fluctuated); Beijing had the most unbalanced, unsteady pattern (the different factors were at different levels, and education and culture and social security fluctuated). For enhanced urban public health status, environmental quality and education and culture clearly need to be improved in Beijing. This study demonstrates that a comparison of different cities is helpful in identifying limiting factors for urban public health and providing an orientation for future urban development.

  15. Stainless steel fabrication for high quality requirements in the nuclear industry

    International Nuclear Information System (INIS)

    Wareing, A.J.

    1990-01-01

    In this paper the author explains the welding procedures and practices adopted within the nuclear industry to achieve the high quality and standards of welds required. The changeover to mechanised welding, orbital TIG welding and synergic MIG welding, has resulted in consistent achievement of high quality standards as well as optimising the productivity. However, the use of mechanised welding machines does require the welder operating them to be fully trained and qualified. The formally organised training courses are described and the cost savings and production rates achieved by utilising the mechanised method are discussed. (author)

  16. Adaptive enhancement of optical fringe patterns by selective reconstruction using FABEMD algorithm and Hilbert spiral transform.

    Science.gov (United States)

    Trusiak, Maciej; Patorski, Krzysztof; Wielgus, Maciej

    2012-10-08

    Presented method for fringe pattern enhancement has been designed for processing and analyzing low quality fringe patterns. It uses a modified fast and adaptive bidimensional empirical mode decomposition (FABEMD) for the extraction of bidimensional intrinsic mode functions (BIMFs) from an interferogram. Fringe pattern is then selectively reconstructed (SR) taking the regions of selected BIMFs with high modulation values only. Amplitude demodulation and normalization of the reconstructed image is conducted using the spiral phase Hilbert transform (HS). It has been tested using computer generated interferograms and real data. The performance of the presented SR-FABEMD-HS method is compared with other normalization techniques. Its superiority, potential and robustness to high fringe density variations and the presence of noise, modulation and background illumination defects in analyzed fringe patterns has been corroborated.

  17. High-Resolution Electronics: Spontaneous Patterning of High-Resolution Electronics via Parallel Vacuum Ultraviolet (Adv. Mater. 31/2016).

    Science.gov (United States)

    Liu, Xuying; Kanehara, Masayuki; Liu, Chuan; Sakamoto, Kenji; Yasuda, Takeshi; Takeya, Jun; Minari, Takeo

    2016-08-01

    On page 6568, T. Minari and co-workers describe spontaneous patterning based on the parallel vacuum ultraviolet (PVUV) technique, enabling the homogeneous integration of complex, high-resolution electronic circuits, even on large-scale, flexible, transparent substrates. Irradiation of PVUV to the hydrophobic polymer surface precisely renders the selected surface into highly wettable regions with sharply defined boundaries, which spontaneously guides a metal nanoparticle ink into a series of circuit lines and gaps with the widths down to a resolution of 1 μm. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  18. Process to Continuously Melt, Refine and Cast High Quality Steel

    Energy Technology Data Exchange (ETDEWEB)

    None

    2005-09-01

    The purpose of this project is to conduct research and development targeted at designing a revolutionary steelmaking process. This process will deliver high quality steel from scrap to the casting mold in one continuous process and will be safer, more productive, and less capital intensive to build and operate than conventional steelmaking. The new process will produce higher quality steel faster than traditional batch processes while consuming less energy and other resources.

  19. Variation in marital quality in a national sample of divorced women.

    Science.gov (United States)

    James, Spencer L

    2015-06-01

    Previous work has compared marital quality between stably married and divorced individuals. Less work has examined the possibility of variation among divorcés in trajectories of marital quality as divorce approaches. This study addressed that hole by first examining whether distinct trajectories of marital quality can be discerned among women whose marriages ended in divorce and, second, the profile of women who experienced each trajectory. Latent class growth analyses with longitudinal data from a nationally representative sample were used to "look backward" from the time of divorce. Although demographic and socioeconomic variables from this national sample did not predict the trajectories well, nearly 66% of divorced women reported relatively high levels of both happiness and communication and either low or moderate levels of conflict. Future research including personality or interactional patterns may lead to theoretical insights about patterns of marital quality in the years leading to divorce. (c) 2015 APA, all rights reserved).

  20. Holographic memory for high-density data storage and high-speed pattern recognition

    Science.gov (United States)

    Gu, Claire

    2002-09-01

    As computers and the internet become faster and faster, more and more information is transmitted, received, and stored everyday. The demand for high density and fast access time data storage is pushing scientists and engineers to explore all possible approaches including magnetic, mechanical, optical, etc. Optical data storage has already demonstrated its potential in the competition against other storage technologies. CD and DVD are showing their advantages in the computer and entertainment market. What motivated the use of optical waves to store and access information is the same as the motivation for optical communication. Light or an optical wave has an enormous capacity (or bandwidth) to carry information because of its short wavelength and parallel nature. In optical storage, there are two types of mechanism, namely localized and holographic memories. What gives the holographic data storage an advantage over localized bit storage is the natural ability to read the stored information in parallel, therefore, meeting the demand for fast access. Another unique feature that makes the holographic data storage attractive is that it is capable of performing associative recall at an incomparable speed. Therefore, volume holographic memory is particularly suitable for high-density data storage and high-speed pattern recognition. In this paper, we review previous works on volume holographic memories and discuss the challenges for this technology to become a reality.

  1. [Analysis of dietary pattern and diabetes mellitus influencing factors identified by classification tree model in adults of Fujian].

    Science.gov (United States)

    Yu, F L; Ye, Y; Yan, Y S

    2017-05-10

    Objective: To find out the dietary patterns and explore the relationship between environmental factors (especially dietary patterns) and diabetes mellitus in the adults of Fujian. Methods: Multi-stage sampling method were used to survey residents aged ≥18 years by questionnaire, physical examination and laboratory detection in 10 disease surveillance points in Fujian. Factor analysis was used to identify the dietary patterns, while logistic regression model was applied to analyze relationship between dietary patterns and diabetes mellitus, and classification tree model was adopted to identify the influencing factors for diabetes mellitus. Results: There were four dietary patterns in the population, including meat, plant, high-quality protein, and fried food and beverages patterns. The result of logistic analysis showed that plant pattern, which has higher factor loading of fresh fruit-vegetables and cereal-tubers, was a protective factor for non-diabetes mellitus. The risk of diabetes mellitus in the population at T2 and T3 levels of factor score were 0.727 (95 %CI: 0.561-0.943) times and 0.736 (95 %CI : 0.573-0.944) times higher, respectively, than those whose factor score was in lowest quartile. Thirteen influencing factors and eleven group at high-risk for diabetes mellitus were identified by classification tree model. The influencing factors were dyslipidemia, age, family history of diabetes, hypertension, physical activity, career, sex, sedentary time, abdominal adiposity, BMI, marital status, sleep time and high-quality protein pattern. Conclusion: There is a close association between dietary patterns and diabetes mellitus. It is necessary to promote healthy and reasonable diet, strengthen the monitoring and control of blood lipids, blood pressure and body weight, and have good lifestyle for the prevention and control of diabetes mellitus.

  2. 76 FR 45397 - Export Inspection and Weighing Waiver for High Quality Specialty Grain Transported in Containers

    Science.gov (United States)

    2011-07-29

    ...-AB18 Export Inspection and Weighing Waiver for High Quality Specialty Grain Transported in Containers... permanent a waiver due to expire on July 31, 2012, for high quality specialty grain exported in containers... of high quality specialty grain exported in containers are small entities that up until recently...

  3. Quality of life of people living with HIV/AIDS and on highly active ...

    African Journals Online (AJOL)

    Quality of life of people living with HIV/AIDS and on highly active ... the Short Form-36 Health Survey (SF-36) was used to measure quality of life among patients on ... instrument for use in Ethiopia to assess the quality of life of people living with ...

  4. A Systematic Process for Developing High Quality SaaS Cloud Services

    Science.gov (United States)

    La, Hyun Jung; Kim, Soo Dong

    Software-as-a-Service (SaaS) is a type of cloud service which provides software functionality through Internet. Its benefits are well received in academia and industry. To fully utilize the benefits, there should be effective methodologies to support the development of SaaS services which provide high reusability and applicability. Conventional approaches such as object-oriented methods do not effectively support SaaS-specific engineering activities such as modeling common features, variability, and designing quality services. In this paper, we present a systematic process for developing high quality SaaS and highlight the essentiality of commonality and variability (C&V) modeling to maximize the reusability. We first define criteria for designing the process model and provide a theoretical foundation for SaaS; its meta-model and C&V model. We clarify the notion of commonality and variability in SaaS, and propose a SaaS development process which is accompanied with engineering instructions. Using the proposed process, SaaS services with high quality can be effectively developed.

  5. Development of high sensitivity and high speed large size blank inspection system LBIS

    Science.gov (United States)

    Ohara, Shinobu; Yoshida, Akinori; Hirai, Mitsuo; Kato, Takenori; Moriizumi, Koichi; Kusunose, Haruhiko

    2017-07-01

    The production of high-resolution flat panel displays (FPDs) for mobile phones today requires the use of high-quality large-size photomasks (LSPMs). Organic light emitting diode (OLED) displays use several transistors on each pixel for precise current control and, as such, the mask patterns for OLED displays are denser and finer than the patterns for the previous generation displays throughout the entire mask surface. It is therefore strongly demanded that mask patterns be produced with high fidelity and free of defect. To enable the production of a high quality LSPM in a short lead time, the manufacturers need a high-sensitivity high-speed mask blank inspection system that meets the requirement of advanced LSPMs. Lasertec has developed a large-size blank inspection system called LBIS, which achieves high sensitivity based on a laser-scattering technique. LBIS employs a high power laser as its inspection light source. LBIS's delivery optics, including a scanner and F-Theta scan lens, focus the light from the source linearly on the surface of the blank. Its specially-designed optics collect the light scattered by particles and defects generated during the manufacturing process, such as scratches, on the surface and guide it to photo multiplier tubes (PMTs) with high efficiency. Multiple PMTs are used on LBIS for the stable detection of scattered light, which may be distributed at various angles due to irregular shapes of defects. LBIS captures 0.3mμ PSL at a detection rate of over 99.5% with uniform sensitivity. Its inspection time is 20 minutes for a G8 blank and 35 minutes for G10. The differential interference contrast (DIC) microscope on the inspection head of LBIS captures high-contrast review images after inspection. The images are classified automatically.

  6. Theoretical study of the high-latitude ionosphere's response to multicell convection patterns

    International Nuclear Information System (INIS)

    Sojka, J.J.; Schunk, R.W.

    1987-01-01

    It is well known that the convection electric fields have an important effect on the ionosphere at high latitudes and that a quantitative understanding of their effect requires a knowledge of the plasma convection pattern. When the interplanetary magnetic field (IMF) is southward, plasma convection at F region altitudes displays a two-cell pattern with antisunward flow over the polar cap and return flow at lower latitudes. However, when the IMF is northward, multiple convection cells can exist, with both sunward flow and auroral precipitation (theta aurora) in the polar cap. The characteristic ionospheric signatures associated with multicell convection patterns were studied with the aid of a three-dimensional time-dependent ionospheric model. Two-, three-, and four-cell patterns were considered and the ionosphere's response was calculated for the same cross-tail potential and for solar maximum and winter conditions in the northern hemisphere. As expected, there are major distinguishing ionospheric features associated with the different convection patterns, particularly in the polar cap. For two-cell convection the antisunward flow the plasma from the dayside into the polar cap. For two-cell convection the antisunward flow of plasma from the dayside into the polar cap acts to maintain the densities in this region in winter. For four-cell convection, on the other hand, the two aditional convection cells in the polar cap are in darkness most of the time, and the resulting O + decay acts to produce twin polar holes that are separated by a sun-aligned ridge of enhanced ionization due to theta aurora precipitation

  7. Standing crop dry matter accumulation and quality patterns of ...

    African Journals Online (AJOL)

    Nine-week production curves and quality values of eight subtropical pasture species were studied under supplemental spray irrigation to characterize their productive capacity, periodicity and quality.All species exhibited a slow dry matter regrowth rate for two to three weeks after defoliation to 7,5 or 10 cm height. Thereafter ...

  8. Gardosian Patterns in Tribology

    Science.gov (United States)

    DellaCorte, Christopher

    2004-01-01

    The following paper is a memorial retrospective on selected research of Dr. Michael N. Gardos. Dr. Gardos spent his professional career engaged in tribological research which often extended the scientific boundaries of the field. Several of the concepts he put forth into the tribology community were initially met with grave skepticism but over time his views have been largely embraced but not widely acknowledged. His approach to new research topics was often characterized by these qualities: 1) pioneering points of view, 2) the use of the model experiment, and 3) the presence of multiple research agendas for each single experiment. I have chosen to name his research approach as "Gardosian Patterns" in honor of his contributions to Tribology. Three specific examples of these patterns will be reviewed. One is the concept of atomic level tailoring of materials to control macroscopic properties. A second is the use of a model ball polishing experiment to identify high fracture toughness ceramics for use in rolling element bearings. A third Gardosian Pattern example is his pioneering work with the tribology of diamond and diamond films in which he proposed controlling friction via surface bond tailoring. In these examples, Gardos utilized conventional research tools in unconventional ways and, at times, even developed new tools which have become part of the mainstream. His remarkable career has left a positive and lasting mark on Tribology.

  9. High quality flux control system for electron gun evaporation

    International Nuclear Information System (INIS)

    Appelbloom, A.M.; Hadley, P.; van der Marel, D.; Mooij, J.E.

    1991-01-01

    This paper reports on a high quality flux control system for electron gun evaporation developed and tested for the MBE growth of high temperature superconductors. The system can be applied to any electron gun without altering the electron gun itself. Essential elements of the system are a high bandwidth mass spectrometer, control electronics and a high voltage modulator to sweep the electron beam over the melt at high frequencies. the sweep amplitude of the electron beam is used to control the evaporation flux at high frequencies. The feedback loop of the system has a bandwidth of over 100 Hz, which makes it possible to grow superlattices and layered structures in a fast and precisely controlled manner

  10. Obtainment of sugarcane (Saccharum spp. hybrid biotechnological seed of high genetic and phytosanitary quality in Ecuador

    Directory of Open Access Journals (Sweden)

    Miguel M. Ramos-Leal

    2015-01-01

    Full Text Available Methods for obtaining healthy plants are mainly based on the combined use of meristem in vitro culture and hydrothermotherapy. This work was carried out in order to obtain free- pathogen plants for using as seeds, emphasizing ratoon stunting disease (RSD of sugarcane. The work was performed using a group of sugarcane cultivars, which was confirmed the variety identification by means of peroxidases isozymes electrophoretic patterns. Plant sanitation was performed in three successive steps by means of hydrothermal treatment at 52 oC during 2h and using the fungicide vitavax, a second hydrothermal treatment at 51 °C during 10 min to the meristem and a third step in which vitroplantlets were propagated in presence of the antibiotic gentamicin. RSD detection was done by using the staining transpiration methods (STM of functional bundles. Results allowed the creation of a germoplasm bank of sugarcane plants free of the most important systemic bacterial pathogens, with high genetic quality, which provided basic seed of excellent quality for establishing seedlings. Conservation included an in vitro-plantlets bank and the creation of a "DNA bank" which allows preserving the genetic fond in laboratory conditions. Finally a methodology for obtaining free-pathogens plants from buds and meristems is included.

  11. High quality factor GaAs microcavity with buried bullseye defects

    Science.gov (United States)

    Winkler, K.; Gregersen, N.; Häyrynen, T.; Bradel, B.; Schade, A.; Emmerling, M.; Kamp, M.; Höfling, S.; Schneider, C.

    2018-05-01

    The development of high quality factor solid-state microcavities with low mode volumes has paved the way towards on-chip cavity quantum electrodynamics experiments and the development of high-performance nanophotonic devices. Here, we report on the implementation of a new kind of solid-state vertical microcavity, which allows for confinement of the electromagnetic field in the lateral direction without deep etching. The confinement originates from a local elongation of the cavity layer imprinted in a shallow etch and epitaxial overgrowth technique. We show that it is possible to improve the quality factor of such microcavities by a specific in-plane bullseye geometry consisting of a set of concentric rings with subwavelength dimensions. This design results in a smooth effective lateral photonic potential and therefore in a reduction of lateral scattering losses, which makes it highly appealing for experiments in the framework of exciton-polariton physics demanding tight spatial confinement.

  12. Plans, Patterns, and Move Categories Guiding a Highly Selective Search

    Science.gov (United States)

    Trippen, Gerhard

    In this paper we present our ideas for an Arimaa-playing program (also called a bot) that uses plans and pattern matching to guide a highly selective search. We restrict move generation to moves in certain move categories to reduce the number of moves considered by the bot significantly. Arimaa is a modern board game that can be played with a standard Chess set. However, the rules of the game are not at all like those of Chess. Furthermore, Arimaa was designed to be as simple and intuitive as possible for humans, yet challenging for computers. While all established Arimaa bots use alpha-beta search with a variety of pruning techniques and other heuristics ending in an extensive positional leaf node evaluation, our new bot, Rat, starts with a positional evaluation of the current position. Based on features found in the current position - supported by pattern matching using a directed position graph - our bot Rat decides which of a given set of plans to follow. The plan then dictates what types of moves can be chosen. This is another major difference from bots that generate "all" possible moves for a particular position. Rat is only allowed to generate moves that belong to certain categories. Leaf nodes are evaluated only by a straightforward material evaluation to help avoid moves that lose material. This highly selective search looks, on average, at only 5 moves out of 5,000 to over 40,000 possible moves in a middle game position.

  13. Use of Sine Shaped High-Frequency Rhythmic Visual Stimuli Patterns for SSVEP Response Analysis and Fatigue Rate Evaluation in Normal Subjects

    Directory of Open Access Journals (Sweden)

    Ahmadreza Keihani

    2018-05-01

    Full Text Available Background: Recent EEG-SSVEP signal based BCI studies have used high frequency square pulse visual stimuli to reduce subjective fatigue. However, the effect of total harmonic distortion (THD has not been considered. Compared to CRT and LCD monitors, LED screen displays high-frequency wave with better refresh rate. In this study, we present high frequency sine wave simple and rhythmic patterns with low THD rate by LED to analyze SSVEP responses and evaluate subjective fatigue in normal subjects.Materials and Methods: We used patterns of 3-sequence high-frequency sine waves (25, 30, and 35 Hz to design our visual stimuli. Nine stimuli patterns, 3 simple (repetition of each of above 3 frequencies e.g., P25-25-25 and 6 rhythmic (all of the frequencies in 6 different sequences e.g., P25-30-35 were chosen. A hardware setup with low THD rate (<0.1% was designed to present these patterns on LED. Twenty two normal subjects (aged 23–30 (25 ± 2.1 yrs were enrolled. Visual analog scale (VAS was used for subjective fatigue evaluation after presentation of each stimulus pattern. PSD, CCA, and LASSO methods were employed to analyze SSVEP responses. The data including SSVEP features and fatigue rate for different visual stimuli patterns were statistically evaluated.Results: All 9 visual stimuli patterns elicited SSVEP responses. Overall, obtained accuracy rates were 88.35% for PSD and > 90% for CCA and LASSO (for TWs > 1 s. High frequency rhythmic patterns group with low THD rate showed higher accuracy rate (99.24% than simple patterns group (98.48%. Repeated measure ANOVA showed significant difference between rhythmic pattern features (P < 0.0005. Overall, there was no significant difference between the VAS of rhythmic [3.85 ± 2.13] compared to the simple patterns group [3.96 ± 2.21], (P = 0.63. Rhythmic group had lower within group VAS variation (min = P25-30-35 [2.90 ± 2.45], max = P35-25-30 [4.81 ± 2.65] as well as least individual pattern VAS (P25

  14. A periodic pattern of SNPs in the human genome

    DEFF Research Database (Denmark)

    Madsen, Bo Eskerod; Villesen, Palle; Wiuf, Carsten

    2007-01-01

    By surveying a filtered, high-quality set of SNPs in the human genome, we have found that SNPs positioned 1, 2, 4, 6, or 8 bp apart are more frequent than SNPs positioned 3, 5, 7, or 9 bp apart. The observed pattern is not restricted to genomic regions that are known to cause sequencing...... periodic DNA. Our results suggest that not all SNPs in the human genome are created by independent single nucleotide mutations, and that care should be taken in analysis of SNPs from periodic DNA. The latter may have important consequences for SNP and association studies....... or alignment errors, for example, transposable elements (SINE, LINE, and LTR), tandem repeats, and large duplicated regions. However, we found that the pattern is almost entirely confined to what we define as "periodic DNA." Periodic DNA is a genomic region with a high degree of periodicity in nucleotide usage...

  15. Time-Efficient High-Resolution Large-Area Nano-Patterning of Silicon Dioxide

    Directory of Open Access Journals (Sweden)

    Li Lin

    2017-01-01

    Full Text Available A nano-patterning approach on silicon dioxide (SiO2 material, which could be used for the selective growth of III-V nanowires in photovoltaic applications, is demonstrated. In this process, a silicon (Si stamp with nanopillar structures was first fabricated using electron-beam lithography (EBL followed by a dry etching process. Afterwards, the Si stamp was employed in nanoimprint lithography (NIL assisted with a dry etching process to produce nanoholes on the SiO2 layer. The demonstrated approach has advantages such as a high resolution in nanoscale by EBL and good reproducibility by NIL. In addition, high time efficiency can be realized by one-spot electron-beam exposure in the EBL process combined with NIL for mass production. Furthermore, the one-spot exposure enables the scalability of the nanostructures for different application requirements by tuning only the exposure dose. The size variation of the nanostructures resulting from exposure parameters in EBL, the pattern transfer during nanoimprint in NIL, and subsequent etching processes of SiO2 were also studied quantitatively. By this method, a hexagonal arranged hole array in SiO2 with a hole diameter ranging from 45 to 75 nm and a pitch of 600 nm was demonstrated on a four-inch wafer.

  16. Dietary patterns during high school and risk of colorectal adenoma in a cohort of middle-aged women.

    Science.gov (United States)

    Nimptsch, Katharina; Malik, Vasanti S; Fung, Teresa T; Pischon, Tobias; Hu, Frank B; Willett, Walter C; Fuchs, Charles S; Ogino, Shuji; Chan, Andrew T; Giovannucci, Edward; Wu, Kana

    2014-05-15

    Adolescent diet may be etiologically relevant for later risk of colorectal adenoma, a precursor of colorectal cancer. We aimed to examine associations between adolescent dietary patterns (derived using factor analysis) and risk of colorectal adenoma in middle adulthood. We analyzed data from 17,221 women participating in the Nurses' Health Study II, who had completed a validated high school (HS) food frequency questionnaire in 1998 when they were 34-51 years old, and had subsequently undergone at least one lower bowel endoscopy. Between 1998 and 2007, 1,299 women were diagnosed with at least one colorectal adenoma. In multivariable models adjusted for adult dietary patterns, a higher "prudent" pattern during HS, characterized by high consumption of vegetables, fruit and fish was associated with a statistically significantly lower risk of rectal (odds ratio [OR] highest vs. lowest quintile, 0.45, 95% CI 0.27-0.75, p-trend = 0.005), but not colon adenomas. A higher "Western" pattern during HS, characterized by high consumption of desserts and sweets, snack foods and red and processed meat, was significantly associated with rectal (OR 1.78, 95% CI 1.12-2.85, p-trend = 0.005) and advanced (OR 1.58, 95% CI 1.07-2.33, p-trend = 0.08), but not associated with colon or non-advanced adenomas. This study suggests that overall eating patterns during high school may influence later risk of rectal and advanced adenoma, independent of adult diet. Our results support the hypothesis that diet during early life may influence colorectal carcinogenesis. © 2013 UICC.

  17. A design technique of low cost but high quality peak stretcher

    Energy Technology Data Exchange (ETDEWEB)

    Lo, H Y; Su, C S; Hsu, J Y; Wang, L

    1981-03-01

    This paper presents the design of low cost but high quality pulse peak stretcher incorporated with a LSI of 12 bit ADC and SKD-85 microcomputer. The conflict between the capacitor high charging speed and longer holding time for realizing a high quality stretcher is discussed and solved. For a lager number of channels available in a dual ramp Wilkinson-type ADC, two-stage stretchers connected in series are designed. The first stage is a fast-discharge to keep the output stretched pulse follow-up the input quickly and the second-stage (main stretcher) is a slow-discharge to keep the transient of the circuit minimum. Both of these two peak stretchers are described and the experiment results are photographically recorded.

  18. High-Si content BARC for dual-BARC systems such as trilayer patterning

    Science.gov (United States)

    Kennedy, Joseph; Xie, Song-Yuan; Wu, Ze-Yu; Katsanes, Ron; Flanigan, Kyle; Lee, Kevin; Slezak, Mark; Liu, Zhi; Lin, Shang-Ho

    2009-03-01

    This work discusses the requirements and performance of Honeywell's middle layer material, UVAS, for tri-layer patterning. UVAS is a high Si content polymer synthesized directly from Si containing starting monomer components. The monomers are selected to produce a film that meets the requirements as a middle layer for tri-layer patterning (TLP) and gives us a level of flexibility to adjust the properties of the film to meet the customer's specific photoresist and patterning requirements. Results of simulations of the substrate reflectance versus numerical aperture, UVAS thickness, and under layer film are presented. ArF photoresist line profiles and process latitude versus UVAS bake at temperatures as low as 150ºC are presented and discussed. Immersion lithographic patterning of ArF photoresist line space and contact hole features will be presented. A sequence of SEM images detailing the plasma etch transfer of line space photoresist features through the middle and under layer films comprising the TLP film stack will be presented. Excellent etch selectivity between the UVAS and the organic under layer film exists as no edge erosion or faceting is observed as a result of the etch process. A detailed study of the impact of a PGMEA solvent photoresist rework process on the lithographic process window of a TLP film stack was performed with the results indicating that no degradation to the UVAS film occurs.

  19. High dose-rate brachytherapy source position quality assurance using radiochromic film

    International Nuclear Information System (INIS)

    Evans, M.D.C.; Devic, S.; Podgorsak, E.B.

    2007-01-01

    Traditionally, radiographic film has been used to verify high-dose-rate brachytherapy source position accuracy by co-registering autoradiographic and diagnostic images of the associated applicator. Filmless PACS-based clinics that do not have access to radiographic film and wet developers may have trouble performing this quality assurance test in a simple and practical manner. We describe an alternative method for quality assurance using radiochromic-type film. In addition to being easy and practical to use, radiochromic film has some advantages in comparison with traditional radiographic film when used for HDR brachytherapy quality assurance

  20. High Quality Education and Learning for All through Open Education

    NARCIS (Netherlands)

    Stracke, Christian M.

    2016-01-01

    Keynote at the International Lensky Education Forum 2016, Yakutsk, Republic of Sakha, Russian Federation, by Stracke, C. M. (2016, 16 August): "High Quality Education and Learning for All through Open Education"

  1. High repeatability from 3D experimental platform for quantitative analysis of cellular branch pattern formations.

    Science.gov (United States)

    Hagiwara, Masaya; Nobata, Rina; Kawahara, Tomohiro

    2018-04-24

    Three-dimensional (3D) cell and tissue cultures more closely mimic biological environments than two-dimensional (2D) cultures and are therefore highly desirable in culture experiments. However, 3D cultures often fail to yield repeatable experimental results because of variation in the initial culture conditions, such as cell density and distribution in the extracellular matrix, and therefore reducing such variation is a paramount concern. Here, we present a 3D culture platform that demonstrates highly repeatable experimental results, obtained by controlling the initial cell cluster shape in the gel cube culture device. A micro-mould with the desired shape was fabricated by photolithography or machining, creating a 3D pocket in the extracellular matrix contained in the device. Highly concentrated human bronchial epithelial cells were then injected in the pocket so that the cell cluster shape matched the fabricated mould shape. Subsequently, the cubic device supplied multi-directional scanning, enabling high-resolution capture of the whole tissue structure with only a low-magnification lens. The proposed device significantly improved the repeatability of the developed branch pattern, and multi-directional scanning enabled quantitative analysis of the developed branch pattern formations. A mathematical simulation was also conducted to reveal the mechanisms of branch pattern formation. The proposed platform offers the potential to accelerate any research field that conducts 3D culture experiments, including tissue regeneration and drug development.

  2. Safety and quality management at the high flux reactor Petten

    International Nuclear Information System (INIS)

    Zurita, A.; Ahlf, J.

    1995-01-01

    The High Flux Reactor (HFR) is one high power multi-purpose materials testing research reactor of the tank-in-pool type, cooled and moderated by light-water. It is operated at 45 MW at a prescribed schedule of 11 cycles per year, each comprising 25 operation days and three shut-down days. Since the licence for the operation of HFR was granted in 1962, a total of 14 amendments to the original licence have been made following different modifications in the installations. In the meantime, international nuclear standards were developed, especially in the framework of the NUSS programme of the IAEA, which were adopted by the Dutch Licensing Authorities. In order to implement the new standards, the situation at the HFR was comprehensively reviewed in the course of an audit performed by the Dutch Licensing Authorities in 1988. This also resulted in formulating the task of setting-up an 'HFR - Integral Quality Assurance Handbook' (HFR-IQAD) involving both organizations JRCIAM and ECN, which had the unique framework and basic guideline to assure the safe and efficient operation and exploitation of the HFR and to promote safety and quality in all aspects of HFR related activities. The assurance of safe and efficient operation and exploitation of the HFR is condensed together under the concepts of safety and quality of services and is achieved through the safety and quality management. (orig.)

  3. Highχ block copolymers for directed self-assembly patterning without the need for topcoat or solvent annealing

    Science.gov (United States)

    Xu, Kui; Hockey, Mary Ann; Calderas, Eric; Guerrero, Douglas; Sweat, Daniel; Fiehler, Jeffrey

    2017-03-01

    High-χ block copolymers for directed self-assembly (DSA) patterning that do not need topcoat or solvent annealing have been developed. A variety of functionalities have been successfully added into the block copolymers, such as balanced surface energy between the polymer blocks, outstandingly high χ, tunable glass transition temperature (Tg), and selective crosslinking. Perpendicular orientation control, as desired for patterning, of the block copolymers can be simply achieved by thermal annealing due to the equal surface energy of the polymer blocks at the annealing temperatures, which allows avoiding solvent annealing or top-coat. The χ value can be tuned up to achieve L0 as low as 8-10 nm for lamellar-structured block copolymers and hole/pillar size as small as 5-6 nm for cylinder-structured block copolymers. The Tg of the block copolymers can be tuned to improve the kinetics of thermal annealing by enhancing the polymer chain mobility. Block-selective crosslinking facilitates the pattern transfer by mitigating pattern collapse during wet etching and improving oxygen plasma etching selectivity between the polymer blocks. This paper provides an introductory review of our high-χ block copolymer materials with various functionalities for achieving improved DSA performance.

  4. Serial high resolution CT in non-specific interstitial pneumonia: prognostic value of the initial pattern

    Energy Technology Data Exchange (ETDEWEB)

    Screaton, N.J. [Department of Radiology, Addenbrooke' s Hospital, Cambridge (United Kingdom)]. E-mail: nicholas.screaton@papworth.nhs.uk; Hiorns, M.P. [Department of Radiology, Great Ormond Street Hospital, London (United Kingdom); Lee, K.S. [Samsung Medical Centre, Seoul (Korea); Franquet, T. [Hospital de Saint Pau, Universidad Autonoma de Barcelona, Barcelona (Spain); Johkoh, T. [Department of Medical Physics and Radiology, Osaka University Graduate School of Medicine, Osaka (Japan); Fujimoto, K. [Department of Radiology, Kurume University School of Medicine, Kurume (Japan); Ichikado, K. [First Department of Internal Medicine, Kumamoto University School of Medicine, Kumamoto (Japan); Colby, T.V. [Department of Laboratory Medicine/Pathology, Mayo Clinic Scottsdale, AZ (United States); Mueller, N.L. [Department of Radiology, Vancouver General Hospital, Vancouver (Canada)

    2005-01-01

    AIM: To assess the relationship between initial CT pattern and serial changes in CT findings and pulmonary function tests (PFTs) in patients with non-specific interstitial pneumonia (NSIP). MATERIALS AND METHODS: Serial high resolution (HR) CTs and PFTs were retrospectively analyzed in 38 cases of histologically proven NSIP, including 4 with cellular NSIP, 13 with mixed cellular and fibrotic NSIP, and 21 with fibrotic NSIP. The presence and extent of various CT findings were assessed. A fibrosis index (defined as the ratio of the extent of a reticular/honeycomb pattern to the overall extent of abnormal parenchyma) was derived. RESULTS: The predominant CT pattern was reticular/honeycomb in 27 (84%) cases and ground-glass/consolidation in 6 (16%) cases. Between scans, mean disease extent reduced by 5.2%. Disease extent reduced by >10% in 13 (34%) and increased by >10% in 6 (16%) patients. Histopathological subtype of NSIP did not correlate with individual CT pattern, predominant pattern, fibrosis index or serial change in disease extent on CT or PFTs. Response on follow-up CT was associated with fibrosis index, predominant pattern and extent of consolidation on initial CT. CONCLUSION: In NSIP disease, progression on CT correlates with the predominant CT pattern, fibrosis index, and extent of consolidation but not with histopathological subtype. An inflammatory (ground-glass/consolidation) predominant pattern is associated with better outcome in terms of disease extent on HRCT.

  5. INTERACTIONS BETWEEN MODULATED LUMINANCE PATTERNS AND RANDOM-DOT PATTERNS

    NARCIS (Netherlands)

    CORNELISSEN, FW; KOOIJMAN, AC

    1994-01-01

    It has been suggested that density modulated random-dot patterns can be used to study higher order pattern vision [Van Meeteren and Barlow (1981) Vision Research, 21, 765-777]. The high contrast dots of which the pattern is composed, are assumed to be reliably transduced-and transmitted by the lower

  6. Causality Between Urban Concentration and Environmental Quality

    Directory of Open Access Journals (Sweden)

    Amin Pujiati

    2015-08-01

    Full Text Available Population is concentrated in urban areas can cause the external diseconomies on environment if it exceeds the carrying capacity of the space and the urban economy. Otherwise the quality of the environment is getting better, led to the concentration of population in urban areas are increasingly high. This study aims to analyze the relationship of causality between the urban concentration and environmental quality in urban agglomeration areas. The data used in the study of secondary data obtained from the Central Bureau of statistics and the City Government from 2000 to 2013. The analytical method used is the Granger causality and descriptive. Granger causality study results showed no pattern of reciprocal causality, between urban concentration and the quality of the environment, but there unidirectional relationship between the urban concentration and environmental quality. This means that increasing urban concentration led to decreased environmental quality.

  7. Exploring the behavioural patterns of knowledge dimensions and cognitive processes in peer-moderated asynchronous online discussions

    Directory of Open Access Journals (Sweden)

    Hajar Ghadirian

    2018-05-01

    Full Text Available Peer moderation has been used as a beneficial strategy in asynchronous online discussions to assist student learning performance. However, most studies in peer-moderated asynchronous online discussions (PMAOD have focused only on learning effectiveness and perceptions of students rather than on students’ knowledge dimensions and cognitive processing patterns. This study combined quantitative content analysis (QCA and lag sequential analysis (LSA to explore student knowledge dimensions and cognitive processing patterns in PMAOD. The participants were 84 students in an undergraduate blended course from University Putra Malaysia (UPM, Malaysia. The Revised Bloom Taxonomy (RBT was used as the codification scheme to code the discussion transcripts of participants assigned the role of peer moderators in a reciprocal manner over seven weeks. Behavioural distributions and patterns of high- and low-quality discussion groups were compared. Results showed that students were primarily sharing knowledge dimensions and cognitive processes of metacognition and understanding, respectively. Additionally, it was found that there was a modest proportion of off-topic discussions. Nonetheless, by means of LSA, it was found that PMAOD exhibited a certain degree of self-sustainability in knowledge and cognitive process behaviours, with the exceptions of procedural knowledge and the cognitive process of applyingand, in terms of diversity in knowledge dimension and cognitive processing, high-quality discussion groups outperformed low-quality groups.

  8. Quality and efficiency in high dimensional Nearest neighbor search

    KAUST Repository

    Tao, Yufei; Yi, Ke; Sheng, Cheng; Kalnis, Panos

    2009-01-01

    Nearest neighbor (NN) search in high dimensional space is an important problem in many applications. Ideally, a practical solution (i) should be implementable in a relational database, and (ii) its query cost should grow sub-linearly with the dataset size, regardless of the data and query distributions. Despite the bulk of NN literature, no solution fulfills both requirements, except locality sensitive hashing (LSH). The existing LSH implementations are either rigorous or adhoc. Rigorous-LSH ensures good quality of query results, but requires expensive space and query cost. Although adhoc-LSH is more efficient, it abandons quality control, i.e., the neighbor it outputs can be arbitrarily bad. As a result, currently no method is able to ensure both quality and efficiency simultaneously in practice. Motivated by this, we propose a new access method called the locality sensitive B-tree (LSB-tree) that enables fast highdimensional NN search with excellent quality. The combination of several LSB-trees leads to a structure called the LSB-forest that ensures the same result quality as rigorous-LSH, but reduces its space and query cost dramatically. The LSB-forest also outperforms adhoc-LSH, even though the latter has no quality guarantee. Besides its appealing theoretical properties, the LSB-tree itself also serves as an effective index that consumes linear space, and supports efficient updates. Our extensive experiments confirm that the LSB-tree is faster than (i) the state of the art of exact NN search by two orders of magnitude, and (ii) the best (linear-space) method of approximate retrieval by an order of magnitude, and at the same time, returns neighbors with much better quality. © 2009 ACM.

  9. Eating patterns, diet quality and energy balance: from the macro- to the microscopic.

    Science.gov (United States)

    Lowe, Michael R

    2014-07-01

    As a discussant for the 2013 IBRC Symposium on Eating Patterns, Diet Quality and Energy Balance at Purdue University, I describe here several reflections I had on the papers as a whole. I initially focus on the keynote address by Dr. Leonard. His address suggested that the evolutionary development of Homo sapiens during the past 2 million years may have "prepared" humans to seek and consume food beyond their immediate energy needs, a predisposition that may have rendered humans particularly vulnerable to modern food environments. Additional observations include: 1) the importance of differentiating between a given appetitive variable (e.g., snacking) as a potential cause versus consequence of an outcome of interest (e.g., obesity), 2) the need to move beyond research on the consummatory phase of appetite to the anticipatory phase of appetite, and 3) the opportunity that exists to take the many obesogenic nutritional influences documented in the symposium and "turn them on their heads" to facilitate, rather than undermine, long-term weight control. Copyright © 2014 Elsevier Inc. All rights reserved.

  10. High-resolution X-ray television and high-resolution video recorders

    International Nuclear Information System (INIS)

    Haendle, J.; Horbaschek, H.; Alexandrescu, M.

    1977-01-01

    The improved transmission properties of the high-resolution X-ray television chain described here make it possible to transmit more information per television image. The resolution in the fluoroscopic image, which is visually determined, depends on the dose rate and the inertia of the television pick-up tube. This connection is discussed. In the last few years, video recorders have been increasingly used in X-ray diagnostics. The video recorder is a further quality-limiting element in X-ray television. The development of function patterns of high-resolution magnetic video recorders shows that this quality drop may be largely overcome. The influence of electrical band width and number of lines on the resolution in the X-ray television image stored is explained in more detail. (orig.) [de

  11. Patterning of Perovskite Single Crystals

    KAUST Repository

    Corzo, Daniel

    2017-06-12

    As the internet-of-things hardware integration continues to develop and the requirements for electronics keep diversifying and expanding, the necessity for specialized properties other than the classical semiconductor performance becomes apparent. The success of emerging semiconductor materials depends on the manufacturability and cost as much as on the properties and performance they offer. Solution-based semiconductors are an emerging concept that offers the advantage of being compatible with large-scale manufacturing techniques and have the potential to yield high-quality electronic devices at a lower cost than currently available solutions. In this work, patterns of high-quality MAPbBr3 perovskite single crystals in specific locations are achieved through the modification of the substrate properties and solvent engineering. The fabrication of the substrates involved modifying the surface adhesion forces through functionalization with self-assembled monolayers and patterning them by photolithography processes. Spin coating and blade coating were used to deposit the perovskite solution on the modified silicon substrates. While single crystal perovskites were obtained with the modification of substrates alone, solvent engineering helped with improving the Marangoni flows in the deposited droplets by increasing the contact angle and lowering the evaporation rate, therefore controlling and improving the shape of the grown perovskite crystals. The methodology is extended to other types of perovskites such as the transparent MAPbCl3 and the lead-free MABi2I9, demonstrating the adaptability of the process. Adapting the process to electrode arrays opened up the path towards the fabrication of optoelectronic devices including photodetectors and field-effect transistors, for which the first iterations are demonstrated. Overall, manufacturing and integration techniques permitting the fabrication of single crystalline devices, such as the method in this thesis work, are

  12. Peripheral atherectomy practice patterns in the United States from the Vascular Quality Initiative.

    Science.gov (United States)

    Mohan, Sathish; Flahive, Julie M; Arous, Edward J; Judelson, Dejah R; Aiello, Francesco A; Schanzer, Andres; Simons, Jessica P

    2018-06-21

    Peripheral atherectomy has been shown to have technical success in single-arm studies, but clinical advantages over angioplasty and stenting have not been demonstrated, leaving its role unclear. We sought to describe patterns of atherectomy use in a real-world U.S. cohort to understand how it is currently being applied. The Vascular Quality Initiative was queried to identify all patients who underwent peripheral vascular intervention from January 2010 to September 2016. Descriptive statistics were performed to analyze demographics of the patients, comorbidities, indication, treatment modalities, and lesion characteristics. The intermittent claudication (IC) and critical limb ischemia (CLI) cohorts were analyzed separately. Of 85,605 limbs treated, treatment indication was IC in 51% (n = 43,506) and CLI in 49% (n = 42,099). Atherectomy was used in 15% (n = 13,092) of cases, equivalently for IC (15%; n = 6674) and CLI (15%; n = 6418). There was regional variation in use of atherectomy, ranging from a low of 0% in one region to a high of 32% in another region. During the study period, there was a significant increase in the proportion of cases that used atherectomy (11% in 2010 vs 18% in 2016; P < .0001). Compared with nonatherectomy cases, those with atherectomy use had higher incidence of prior peripheral vascular intervention (IC, 55% vs 43% [P < .0001]; CLI, 47% vs 41% [P < .0001]), greater mean number of arteries treated (IC, 1.8 vs 1.6 [P < .0001]; CLI, 2.1 vs 1.7 [P < .0001]), and lower proportion of prior leg bypass (IC, 10% vs 14% [P < .0001]; CLI, 11% vs 17% [P < .0001]). There was lower incidence of failure to cross the lesion (IC, 1% vs 4% [P < .0001]; CLI, 4% vs 7% [P < .0001]) but higher incidence of distal embolization (IC, 1.9% vs 0.8% [P < .0001]; CLI, 3.0% vs 1.4% [P < .0001]) and, in the CLI cohort, arterial perforation (1.4% vs 1.0%; P = .01). Despite a lack of evidence for atherectomy over angioplasty and stenting, its use has

  13. High School Sport Specialization Patterns of Current Division I Athletes.

    Science.gov (United States)

    Post, Eric G; Thein-Nissenbaum, Jill M; Stiffler, Mikel R; Brooks, M Alison; Bell, David R; Sanfilippo, Jennifer L; Trigsted, Stephanie M; Heiderscheit, Bryan C; McGuine, Timothy A

    Sport specialization is a strategy to acquire superior sport performance in 1 sport but is associated with increased injury risk. Currently, the degree of high school specialization among Division I athletes is unknown. College athletes will display increased rates of specialization as they progress through their high school careers. Descriptive epidemiological study. Level 4. Three hundred forty-three athletes (115 female) representing 9 sports from a Midwest Division I University completed a previously utilized sport specialization questionnaire regarding sport participation patterns for each grade of high school. McNemar and chi-square tests were used to investigate associations of grade, sport, and sex with prevalence of sport specialization category (low, moderate, high) (a priori P ≤ 0.05). Specialization increased throughout high school, with 16.9% (n = 58) and 41.1% (n = 141) of athletes highly specialized in 9th and 12th grades, respectively. Football athletes were less likely to be highly specialized than nonfootball athletes for each year of high school ( P 0.23). The majority of Division I athletes were not classified as highly specialized throughout high school, but the prevalence of high specialization increased as athletes progressed through high school. Nonfootball athletes were more likely to be highly specialized than football athletes at each grade level. Most athletes who are recruited to participate in collegiate athletics will eventually specialize in their sport, but it does not appear that early specialization is necessary to become a Division I athlete. Athletes should be counseled regarding safe participation in sport during high school to minimize injury and maximize performance.

  14. Safe and High Quality Food Production using Low Quality Waters and Improved Irrigation Systems and Management, EU Project

    DEFF Research Database (Denmark)

    Plauborg, Finn; Jensen, Christian Richardt; Dalsgaard, Anders

    2009-01-01

    : the safety and quality of food products, and the increasing competition for clean freshwater. SAFIR is funded for the period 2005-2009 under the Food Quality and Safety thematic area of the EU 6th Framework Research Programme. The challenge for the next years will be to produce safe and high quality foods...... a multi-disciplinary team, with food safety and quality experts, engineers, agronomists and economists from17 research institutes and private companies in Europe, Israel and China working together. The project assesses potential risks to farmers. Coupled with farm management and economic models, a new...... intelligent tool for efficient and safe use and re-use of low-quality water are being developed. Already published results indicate water saving in the order of 25-30% in agricultural crops as potatoes and tomatoes are possible without yield reduction. Slightly treated waste water can be used safely when...

  15. Bullying as a risk for poor sleep quality among high school students in China.

    Directory of Open Access Journals (Sweden)

    Ying Zhou

    Full Text Available To determine whether involvement in bullying as a bully, victim, or bully-victim was associated with a higher risk of poor sleep quality among high school students in China.A cross-sectional study was conducted. A total of 23,877 high school students were surveyed in six cities in Guangdong Province. All students were asked to complete the adolescent health status questionnaire, which included the Chinese version of the Pittsburgh Sleep Quality Index (PSQI and bullying involvement. Descriptive statistics were used to evaluate sleep quality and the prevalence of school bullying. Multi-level logistic regression analyses were conducted to examine the association between being victimized and bullying others with sleep quality.Among the 23,877 students, 6,127 (25.66% reported having poor sleep quality, and 10.89% reported being involved in bullying behaviors. Of the respondents, 1,410 (5.91% were pure victims of bullying, 401 (1.68% were bullies and 784 (3.28% were bully-victims. Frequently being involved in bullying behaviors (being bullied or bullying others was related to increased risks of poor sleep quality compared with adolescents who were not involved in bullying behaviors. After adjusting for age, sex, and other confounding factors, the students who were being bullied (OR=2.05, 95%CI=1.81-2.32, bullied others (OR=2.30, 95%CI=1.85-2.86 or both (OR=2.58, 95%CI=2.20-3.03 were at a higher risk for poor sleep quality.Poor sleep quality among high school students is highly prevalent, and school bullying is prevalent among adolescents in China. The present results suggested that being involved in school bullying might be a risk factor for poor sleep quality among adolescents.

  16. Bullying as a risk for poor sleep quality among high school students in China.

    Science.gov (United States)

    Zhou, Ying; Guo, Lan; Lu, Ci-yong; Deng, Jian-xiong; He, Yuan; Huang, Jing-hui; Huang, Guo-liang; Deng, Xue-qing; Gao, Xue

    2015-01-01

    To determine whether involvement in bullying as a bully, victim, or bully-victim was associated with a higher risk of poor sleep quality among high school students in China. A cross-sectional study was conducted. A total of 23,877 high school students were surveyed in six cities in Guangdong Province. All students were asked to complete the adolescent health status questionnaire, which included the Chinese version of the Pittsburgh Sleep Quality Index (PSQI) and bullying involvement. Descriptive statistics were used to evaluate sleep quality and the prevalence of school bullying. Multi-level logistic regression analyses were conducted to examine the association between being victimized and bullying others with sleep quality. Among the 23,877 students, 6,127 (25.66%) reported having poor sleep quality, and 10.89% reported being involved in bullying behaviors. Of the respondents, 1,410 (5.91%) were pure victims of bullying, 401 (1.68%) were bullies and 784 (3.28%) were bully-victims. Frequently being involved in bullying behaviors (being bullied or bullying others) was related to increased risks of poor sleep quality compared with adolescents who were not involved in bullying behaviors. After adjusting for age, sex, and other confounding factors, the students who were being bullied (OR=2.05, 95%CI=1.81-2.32), bullied others (OR=2.30, 95%CI=1.85-2.86) or both (OR=2.58, 95%CI=2.20-3.03) were at a higher risk for poor sleep quality. Poor sleep quality among high school students is highly prevalent, and school bullying is prevalent among adolescents in China. The present results suggested that being involved in school bullying might be a risk factor for poor sleep quality among adolescents.

  17. The Role of Dosimetry in High-Quality EMI Risk Assessment

    National Research Council Canada - National Science Library

    2006-01-01

    The Final Proceedings for The role of EMF dosimetry in high quality risk assessment 13 September 2006 - 15 September 2006 In the last three decades the use of devices that emit electromagnetic fields (EMF...

  18. Sleep–wake and melatonin pattern in craniopharyngioma patients

    DEFF Research Database (Denmark)

    Pickering, Line; Jennum, Poul; Gammeltoft, Steen

    2014-01-01

    OBJECTIVE: To assess the influence of craniopharyngioma or consequent surgery on melatonin secretion, and the association with fatigue, sleepiness, sleep pattern and sleep quality. DESIGN: Cross-sectional study. METHODS: A total of 15 craniopharyngioma patients were individually matched to healthy......). Only patients with absent midnight peak had impaired sleep quality, increased daytime sleepiness and general and mental fatigue. CONCLUSION: Craniopharyngioma patients present with changes in circadian pattern and daytime symptoms, which may be due to the influence of the craniopharyngioma or its...

  19. A Dynamic Panel Model of the Associations of Sweetened Beverage Purchases With Dietary Quality and Food-Purchasing Patterns

    Science.gov (United States)

    Piernas, Carmen; Ng, Shu Wen; Mendez, Michelle A.; Gordon-Larsen, Penny; Popkin, Barry M.

    2015-01-01

    Investigating the association between consumption of sweetened beverages and dietary quality is challenging because issues such as reverse causality and unmeasured confounding might result in biased and inconsistent estimates. Using a dynamic panel model with instrumental variables to address those issues, we examined the independent associations of beverages sweetened with caloric and low-calorie sweeteners with dietary quality and food-purchasing patterns. We analyzed purchase data from the Homescan survey, an ongoing, longitudinal, nationally representative US survey, from 2000 to 2010 (n = 34,294). Our model included lagged measures of dietary quality and beverage purchases (servings/day in the previous year) as exposures to predict the outcomes (macronutrient (kilocalories per capita per day; %), total energy, and food purchases) in the next year after adjustment for other sociodemographic covariates. Despite secular declines in purchases (kilocalories per capita per day) from all sources, each 1-serving/day increase in consumption of either beverage type resulted in higher purchases of total daily kilocalories and kilocalories from food, carbohydrates, total sugar, and total fat. Each 1-serving/day increase in consumption of either beverage was associated with more purchases of caloric-sweetened desserts or sweeteners, which accounted for a substantial proportion of the increase in total kilocalories. We concluded that consumers of both beverages sweetened with low-calorie sweeteners and beverages sweetened with caloric sweeteners had poorer dietary quality, exhibited higher energy from all purchases, sugar, and fat, and purchased more caloric-sweetened desserts/caloric sweeteners compared with nonconsumers. PMID:25834139

  20. A Narrative Review of High-Quality Literature on the Effects of Resident Duty Hours Reforms.

    Science.gov (United States)

    Lin, Henry; Lin, Emery; Auditore, Stephanie; Fanning, Jon

    2016-01-01

    To summarize current high-quality studies evaluating the effect and efficacy of resident duty hours reforms (DHRs) on patient safety and resident education and well-being. The authors searched PubMed and Medline in August 2012 and again in May 2013 for literature (1987-2013) about the effects of DHRs. They assessed the quality of articles using the Medical Education Research Study Quality Instrument (MERSQI) scoring system. They considered randomized controlled trials (RCTs), partial RCTs, and all studies with a MERSQI score ≥ 14 to be "high-quality" methodology studies. A total of 72 high-quality studies met inclusion criteria. Most studies showed no change or slight improvement in mortality and complication rates after DHRs. Resident well-being was generally improved, but there was a perceived negative impact on education (knowledge acquisition, skills, and cognitive performance) following DHRs. Eleven high-quality studies assessed the impact of DHR interventions; all reported a neutral to positive impact. Seven high-quality studies assessed costs associated with DHRs and demonstrated an increase in hospital costs. The results of most studies that allow enough time for DHR interventions to take effect suggest a benefit to patient safety and resident well-being, but the effect on the quality of training remains unknown. Additional methodologically sound studies on the impact of DHRs are necessary. Priorities for future research include approaches to optimizing education and clinical proficiency and studies on the effect of intervention strategies on both education and patient safety. Such studies will provide additional information to help improve duty hours policies.

  1. larvalign: Aligning Gene Expression Patterns from the Larval Brain of Drosophila melanogaster.

    Science.gov (United States)

    Muenzing, Sascha E A; Strauch, Martin; Truman, James W; Bühler, Katja; Thum, Andreas S; Merhof, Dorit

    2018-01-01

    The larval brain of the fruit fly Drosophila melanogaster is a small, tractable model system for neuroscience. Genes for fluorescent marker proteins can be expressed in defined, spatially restricted neuron populations. Here, we introduce the methods for 1) generating a standard template of the larval central nervous system (CNS), 2) spatial mapping of expression patterns from different larvae into a reference space defined by the standard template. We provide a manually annotated gold standard that serves for evaluation of the registration framework involved in template generation and mapping. A method for registration quality assessment enables the automatic detection of registration errors, and a semi-automatic registration method allows one to correct registrations, which is a prerequisite for a high-quality, curated database of expression patterns. All computational methods are available within the larvalign software package: https://github.com/larvalign/larvalign/releases/tag/v1.0.

  2. Anisotropic photoconductivity and current deflection induced in Bi12SiO20 by high contrast interference pattern

    DEFF Research Database (Denmark)

    Kukhtarev, N.V.; Lyuksyutov, S; Buchhave, Preben

    1996-01-01

    We have predicted and observed an anisotropic photocurrent induced in the cubic crystal Bi/sub 12/SiO/sub 20/ by a high-contrast interference pattern. The transverse current detected when the interference pattern is tilted is caused by deflection of the direct current generated by an external...

  3. Quality of life from a transcultural nursing perspective.

    Science.gov (United States)

    Leininger, M

    1994-01-01

    The author presents research findings derived from Leininger's theory of culture care diversity and universality bearing upon quality of life. She holds that since quality of life is culturally constituted and patterned, it needs to be studied and understood from a transcultural nursing perspective in order to advance nursing as a discipline and profession. Five major cultures are presented to illustrate culturally constituted dominant care patterns related to quality of life. These comparative data reflect more diversity than universality among the cultures. The author encourages nurse researchers to move beyond present-day overemphasis on individualism and to discover dominant transcultural care values and patterns of emic and etic knowledge focused on quality of life, health, and well-being.

  4. High cardiac vagal control is related to better subjective and objective sleep quality.

    Science.gov (United States)

    Werner, Gabriela G; Ford, Brett Q; Mauss, Iris B; Schabus, Manuel; Blechert, Jens; Wilhelm, Frank H

    2015-03-01

    Cardiac vagal control (CVC) has been linked to both physical and mental health. One critical aspect of health, that has not received much attention, is sleep. We hypothesized that adults with higher CVC--operationalized by high-frequency heart rate variability (HF-HRV)--will exhibit better sleep quality assessed both subjectively (i.e., with Pittsburgh Sleep Quality Index) and objectively (i.e., with polysomnography). HF-HRV was measured in 29 healthy young women during an extended neutral film clip. Participants then underwent full polysomnography to obtain objective measures of sleep quality and HF-HRV during a night of sleep. As expected, higher resting HF-HRV was associated with higher subjective and objective sleep quality (i.e., shorter sleep latency and fewer arousals). HF-HRV during sleep (overall or separated by sleep phases) showed less consistent relationships with sleep quality. These findings indicate that high waking CVC may be a key predictor of healthy sleep. Copyright © 2015 The Authors. Published by Elsevier B.V. All rights reserved.

  5. Snacking Patterns of Preschool-Aged Children: Opportunity for Improvement.

    Science.gov (United States)

    Hutchinson, Joy M; Watterworth, Jessica C; Haines, Jess; Duncan, Alison M; Mirotta, Julia A; Ma, David W L; Buchholz, Andrea C

    2018-03-01

    Dietary patterns established in childhood track into adulthood. Despite this, little research has explored preschoolers' snacking. This study examined snacking patterns (frequency, quality, quantity) of preschool-aged boys and girls. Cross-sectional data were collected on 52 children (23 males; 3.4 ± 1.1 years of age; BMI 16.1 ± 1.4 kg/m 2 ) enrolled in the Guelph Family Health Study pilot. Parent-reported 3-day food records were analyzed for children's snacking patterns including frequency (number of snacking occasions per day), quantity (percent energy from snacks) and quality (inclusion of food groups from Eating Well with Canada's Food Guide, macronutrient distribution, sugary and salty snacks). Mann-Whitney U tests examined sex differences in snacking patterns. Ninety-six percent of children snacked daily, consuming a mean of 2.3 ± 0.7 snacks per day. Snacks accounted for one-third of daily energy. 78% of boys' versus 63% of girls' snacks contained a food group (P = 0.016). Boys consumed significantly fewer sugary snacks (0.5 ± 0.4 vs 0.9 ± 0.6 snacks per day, P = 0.016), although the percent of snack calories from sugar for both boys and girls was high (group mean 37.2 ± 6.7%). Nearly all preschoolers in this study snacked daily, and consumed a variety of snack foods. Boys' and girls' snacking preferences begin to diverge early in life. Preschool children should be encouraged to consume healthful snacks.

  6. Multivariate analysis of 2-DE protein patterns - Practical approaches

    DEFF Research Database (Denmark)

    Jacobsen, Charlotte; Jacobsen, Susanne; Grove, H.

    2007-01-01

    Practical approaches to the use of multivariate data analysis of 2-DE protein patterns are demonstrated by three independent strategies for the image analysis and the multivariate analysis on the same set of 2-DE data. Four wheat varieties were selected on the basis of their baking quality. Two...... of the varieties were of strong baking quality and hard wheat kernel and two were of weak baking quality and soft kernel. Gliadins at different stages of grain development were analyzed by the application of multivariate data analysis on images of 2-DEs. Patterns related to the wheat varieties, harvest times...

  7. Mother employment status and nutritional patterns in Japanese junior high schoolchildren.

    Science.gov (United States)

    Gaina, A; Sekine, M; Chandola, T; Marmot, M; Kagamimori, S

    2009-07-01

    To investigate associations between mothers' employment (full, part time and no employment) and nutrition habits (regularity of breakfast, snack, dinner, meal speed and portion size) in a sample of Japanese junior high schoolchildren, 12-13 years of age. A total of 10 453 children aged 12-13 years from the Toyama birth cohort study (fourth phase) participated, of whom 8906 children (89% response rate) responded to all questions related to the examined variables. Nutrition habits consisted of breakfast, snack, dinner, meal speed and meal portion. Children's obesity/overweight was measured by body mass index (BMI). Fathers' employment had no effect on their children's nutrition patterns. Children of full-time employed mothers were the most likely to snack and to skip dinner. Children of part-time employed mothers ate larger meal portions, and those of non-employed mothers reported faster meal speeds. BMI was significantly (P<0.001) higher among children of full-time employed mothers (19.3), and lowest among non-employed mothers (19.00). Children of full-time employed mothers are more likely to be overweight, but not obese compared with other children. There was a strong relationship between mother's employment and nutrition patterns in this cohort of Japanese schoolchildren; special programs focused on children's nutrition patterns should take into account the mothers' employment status.

  8. Patterns of data modeling

    CERN Document Server

    Blaha, Michael

    2010-01-01

    Best-selling author and database expert with more than 25 years of experience modeling application and enterprise data, Dr. Michael Blaha provides tried and tested data model patterns, to help readers avoid common modeling mistakes and unnecessary frustration on their way to building effective data models. Unlike the typical methodology book, "Patterns of Data Modeling" provides advanced techniques for those who have mastered the basics. Recognizing that database representation sets the path for software, determines its flexibility, affects its quality, and influences whether it succ

  9. Selection of process parameters for producing high quality defatted sesame flour at pilot scale.

    Science.gov (United States)

    Manikantan, M R; Sharma, Rajiv; Yadav, D N; Gupta, R K

    2015-03-01

    The present work was undertaken to study the effect of pearling duration, soaking time, steaming duration and drying temperature on the quality of sesame seeds and mechanically extracted partially defatted sesame cake. On the basis of quality attributes i.e. high protein, low crude fibre, low residual oil and low oxalic acid, the optimum process parameters were selected. The combination of 20 min of pearling duration, 15 min of soaking, 15 min of steaming at 100 kPa pressure and drying at 50 °C yielded high quality partially defatted protein rich sesame flour as compared to untreated defatted sesame flour. The developed high quality partially defatted protein rich sesame flour may be used in various food applications as a vital ingredient to increase the nutritional significance of the prepared foodstuffs.

  10. From existing in situ, high-resolution measurement technologies to lab-on-a-chip - the future of water quality monitoring?

    Science.gov (United States)

    Wade, A. J.; Palmer-Felgate, E. J.; Halliday, S. J.; Skeffington, R. A.; Loewenthal, M.; Jarvie, H. P.; Bowes, M. J.; Greenway, G. M.; Haswell, S. J.; Bell, I. M.; Joly, E.; Fallatah, A.; Neal, C.; Williams, R. J.; Gozzard, E.; Newman, J. R.

    2012-05-01

    This paper introduces new insights into the hydrochemical functioning of lowland river-systems using field-based spectrophotometric and electrode technologies. The streamwater concentrations of nitrogen species and phosphorus fractions were measured at hourly intervals on a continuous basis at two contrasting sites on tributaries of the River Thames, one draining a rural catchment, the River Enborne, and one draining a more urban system, The Cut. The measurements complement those from an existing network of multi-parameter water quality sondes maintained across the Thames catchment and weekly monitoring based on grab samples. The results of the sub-daily monitoring show that streamwater phosphorus concentrations display highly complex, seemingly chaotic, dynamics under storm conditions dependent on the antecedent catchment wetness, and that diurnal phosphorus and nitrogen cycles occur under low flow conditions. The diurnal patterns highlight the dominance of sewage inputs in controlling the streamwater phosphorus and nitrogen concentrations at low flows, even at a distance of 7 km from the nearest sewage works in the rural, River Enborne, and that the time of sample collection is important when judging water quality against ecological thresholds or standards. An exhaustion of the supply of phosphorus from diffuse and septic tank sources during storm events was evident and load estimation was not improved by sub-daily monitoring beyond that achieved by daily sampling because of the eventual reduction in the phosphorus mass entering the stream during events. The dominance of respiration over photosynthesis in The Cut indicated a prevalence of heterotrophic algae, and the seasonal patterns in respiration and photosynthesis corresponded with those of temperature and light in this nutrient over-enriched stream. These results highlight the utility of sub-daily water quality measurements but the deployment of modified wet-chemistry technologies into the field was limited

  11. Methods and systems for fabricating high quality superconducting tapes

    Science.gov (United States)

    Majkic, Goran; Selvamanickam, Venkat

    2018-02-13

    An MOCVD system fabricates high quality superconductor tapes with variable thicknesses. The MOCVD system can include a gas flow chamber between two parallel channels in a housing. A substrate tape is heated and then passed through the MOCVD housing such that the gas flow is perpendicular to the tape's surface. Precursors are injected into the gas flow for deposition on the substrate tape. In this way, superconductor tapes can be fabricated with variable thicknesses, uniform precursor deposition, and high critical current densities.

  12. The use of citation indicators to identify and support high-quality research in Poland.

    Science.gov (United States)

    Pilc, Andrzej

    2008-01-01

    In large, mostly English-speaking countries, where the "critical mass" of scientists working in different subfields of science is achieved, the peer review system may be sufficient to assess the quality of scientific research. However, in smaller countries, outside the Anglo-American circle, it is important to introduce different systems to identify research of high quality. In Poland, a parametric system for assessing the quality of research has been introduced. It was largely based on the impact factor of scientific journals. While the use of this indicator to assess research quality is highly questionable, the implementation of the system in the Polish reality is even worse. Therefore it is important to change and improve the system currently used by the Ministry of Science and Higher Education to both evaluate and, more importantly, finance science in Poland. Here, a system based on three factors, i.e. the impact factor, the institutional h-index, and the institutional number of citations, is proposed. The scientific quality of institutions in Division VI: Medical Sciences of the Polish Academy of Sciences were evaluated and the results were compared with the existing system. Moreover, a method to identify high-quality researchers and institutions at the national level based on the quantity of highly cited papers is shown. Additionally, an attempt to identify the highest quality Polish research on an international level is proposed. This is based on the number of individual citations, the individual h-index, the number of publications, and the priority of the discovery.

  13. Innovative and high quality education through Open Education and OER

    OpenAIRE

    Stracke, Christian M.

    2017-01-01

    Online presentation and webinar by Stracke, C. M. (2017, 18 December) on "Innovative and high quality education through Open Education and OER" for the Belt and Road Open Education Learning Week by the Beijing Normal University, China.

  14. Global patterns of fragmentation and connectivity of mammalian carnivore habitat.

    Science.gov (United States)

    Crooks, Kevin R; Burdett, Christopher L; Theobald, David M; Rondinini, Carlo; Boitani, Luigi

    2011-09-27

    Although mammalian carnivores are vulnerable to habitat fragmentation and require landscape connectivity, their global patterns of fragmentation and connectivity have not been examined. We use recently developed high-resolution habitat suitability models to conduct comparative analyses and to identify global hotspots of fragmentation and connectivity for the world's terrestrial carnivores. Species with less fragmentation (i.e. more interior high-quality habitat) had larger geographical ranges, a greater proportion of habitat within their range, greater habitat connectivity and a lower risk of extinction. Species with higher connectivity (i.e. less habitat isolation) also had a greater proportion of high-quality habitat, but had smaller, not larger, ranges, probably reflecting shorter distances between habitat patches for species with restricted distributions; such species were also more threatened, as would be expected given the negative relationship between range size and extinction risk. Fragmentation and connectivity did not differ among Carnivora families, and body mass was associated with connectivity but not fragmentation. On average, only 54.3 per cent of a species' geographical range comprised high-quality habitat, and more troubling, only 5.2 per cent of the range comprised such habitat within protected areas. Identification of global hotspots of fragmentation and connectivity will help guide strategic priorities for carnivore conservation.

  15. Teaching Surgical Procedures with Movies: Tips for High-quality Video Clips

    OpenAIRE

    Jacquemart, Mathieu; Bouletreau, Pierre; Breton, Pierre; Mojallal, Ali; Sigaux, Nicolas

    2016-01-01

    Summary: Video must now be considered as a precious tool for learning surgery. However, the medium does present production challenges, and currently, quality movies are not always accessible. We developed a series of 7 surgical videos and made them available on a publicly accessible internet website. Our videos have been viewed by thousands of people worldwide. High-quality educational movies must respect strategic and technical points to be reliable.

  16. Teaching Surgical Procedures with Movies: Tips for High-quality Video Clips.

    Science.gov (United States)

    Jacquemart, Mathieu; Bouletreau, Pierre; Breton, Pierre; Mojallal, Ali; Sigaux, Nicolas

    2016-09-01

    Video must now be considered as a precious tool for learning surgery. However, the medium does present production challenges, and currently, quality movies are not always accessible. We developed a series of 7 surgical videos and made them available on a publicly accessible internet website. Our videos have been viewed by thousands of people worldwide. High-quality educational movies must respect strategic and technical points to be reliable.

  17. Sleep quality and sleep patterns in relation to consumption of energy drinks, caffeinated beverages, and other stimulants among Thai college students.

    Science.gov (United States)

    Lohsoonthorn, Vitool; Khidir, Hazar; Casillas, Gardenia; Lertmaharit, Somrat; Tadesse, Mahlet G; Pensuksan, Wipawan C; Rattananupong, Thanapoom; Gelaye, Bizu; Williams, Michelle A

    2013-09-01

    Poor sleep and heavy use of caffeinated beverages have been implicated as risk factors for a number of adverse health outcomes. Caffeine consumption and use of other stimulants are common among college students globally. However, to our knowledge, no studies have examined the influence of caffeinated beverages on the sleep quality of college students in Southeast Asian populations. We conducted this study to evaluate the patterns of sleep quality and to examine the extent to which poor sleep quality is associated with consumption of energy drinks, caffeinated beverages, and other stimulants among 2,854 Thai college students. A questionnaire was administered to ascertain demographic and behavioral characteristics. The Pittsburgh Sleep Quality Index was used to assess sleep habits and quality. Chi-square tests and multivariate logistic regression models were used to identify statistically significant associations. Overall, the prevalence of poor sleep quality was found to be 48.1 %. A significant percent of students used stimulant beverages (58.0 %). Stimulant use (odds ratios (OR) 1.50; 95 % confidence intervals (95 % CI) 1.28-1.77) was found to be statistically significant and positively associated with poor sleep quality. Alcohol consumption (OR 3.10; 95 % CI 1.72-5.59) and cigarette smoking (OR 1.43; 95 % CI 1.02-1.98) also had a statistically significant association with increased daytime dysfunction due to sleepiness. In conclusion, stimulant use is common among Thai college students and is associated with several indices of poor sleep quality. Our findings underscore the need to educate students on the importance of sleep and the influences of dietary and lifestyle choices on their sleep quality and overall health.

  18. Comparative Genomics in Switchgrass Using 61,585 High-Quality Expressed Sequence Tags

    Directory of Open Access Journals (Sweden)

    Christian M. Tobias

    2008-11-01

    Full Text Available The development of genomic resources for switchgrass ( L., a perennial NAD-malic enzyme type C grass, is required to enable molecular breeding and biotechnological approaches for improving its value as a forage and bioenergy crop. Expressed sequence tag (EST sequencing is one method that can quickly sample gene inventories and produce data suitable for marker development or analysis of tissue-specific patterns of expression. Toward this goal, three cDNA libraries from callus, crown, and seedling tissues of ‘Kanlow’ switchgrass were end-sequenced to generate a total of 61,585 high-quality ESTs from 36,565 separate clones. Seventy-three percent of the assembled consensus sequences could be aligned with the sorghum [ (L. Moench] genome at a -value of <1 × 10, indicating a high degree of similarity. Sixty-five percent of the ESTs matched with gene ontology molecular terms, and 3.3% of the sequences were matched with genes that play potential roles in cell-wall biogenesis. The representation in the three libraries of gene families known to be associated with C photosynthesis, cellulose and β-glucan synthesis, phenylpropanoid biosynthesis, and peroxidase activity indicated likely roles for individual family members. Pairwise comparisons of synonymous codon substitutions were used to assess genome sequence diversity and indicated an overall similarity between the two genome copies present in the tetraploid. Identification of EST–simple sequence repeat markers and amplification on two individual parents of a mapping population yielded an average of 2.18 amplicons per individual, and 35% of the markers produced fragment length polymorphisms.

  19. Comparison of phase unwrapping algorithms for topography reconstruction based on digital speckle pattern interferometry

    Science.gov (United States)

    Li, Yuanbo; Cui, Xiaoqian; Wang, Hongbei; Zhao, Mengge; Ding, Hongbin

    2017-10-01

    Digital speckle pattern interferometry (DSPI) can diagnose the topography evolution in real-time, continuous and non-destructive, and has been considered as a most promising technique for Plasma-Facing Components (PFCs) topography diagnostic under the complicated environment of tokamak. It is important for the study of digital speckle pattern interferometry to enhance speckle patterns and obtain the real topography of the ablated crater. In this paper, two kinds of numerical model based on flood-fill algorithm has been developed to obtain the real profile by unwrapping from the wrapped phase in speckle interference pattern, which can be calculated through four intensity images by means of 4-step phase-shifting technique. During the process of phase unwrapping by means of flood-fill algorithm, since the existence of noise pollution, and other inevitable factors will lead to poor quality of the reconstruction results, this will have an impact on the authenticity of the restored topography. The calculation of the quality parameters was introduced to obtain the quality-map from the wrapped phase map, this work presents two different methods to calculate the quality parameters. Then quality parameters are used to guide the path of flood-fill algorithm, and the pixels with good quality parameters are given priority calculation, so that the quality of speckle interference pattern reconstruction results are improved. According to the comparison between the flood-fill algorithm which is suitable for speckle pattern interferometry and the quality-guided flood-fill algorithm (with two different calculation approaches), the errors which caused by noise pollution and the discontinuous of the strips were successfully reduced.

  20. Bridging existing governance gaps: five evidence-based actions that boards can take to pursue high quality care.

    Science.gov (United States)

    Leggat, Sandra G; Balding, Cathy

    2017-11-13

    Objective To explore the impact of the organisational quality systems on quality of care in Victorian health services. Methods During 2015 a total of 55 focus groups were conducted with more than 350 managers, clinical staff and board members in eight Victorian health services to explore the effectiveness of health service quality systems. A review of the quality and safety goals and strategies outlined in the strategic and operating plans of the participating health services was also undertaken. Results This paper focuses on the data related to the leadership role of health service boards in ensuring safe, high-quality care. The findings suggest that health service boards are not fully meeting their governance accountability to ensure consistently high-quality care. The data uncovered major clinical governance gaps between stated board and executive aspirations for quality and safety and the implementation of these expectations at point of care. These gaps were further compounded by quality system confusion, over-reliance on compliance, and inadequate staff engagement. Conclusion Based on the existing evidence we propose five specific actions boards can take to close the gaps, thereby supporting improved care for all consumers. What is known about this topic? Effective governance is essential for high-quality healthcare delivery. Boards are required to play an active role in their organisation's pursuit of high quality care. What does this paper add? Recent government reports suggest that Australian health service boards are not fully meeting their governance requirements for high quality, safe care delivery, and our research pinpoints key governance gaps. What are the implications for practitioners? Based on our research findings we outline five evidence-based actions for boards to improve their governance of quality care delivery. These actions focus on an organisational strategy for high-quality care, with the chief executive officer held accountable for

  1. Ramadan major nutrient patterns are associated with anthropometric measurements and physical activity in Tehran, Iran

    Directory of Open Access Journals (Sweden)

    Mahdieh Akhoundan

    2015-05-01

    Full Text Available During Ramadan fasting quantity and quality of dietary intake may change. There was no data on nutrient patterns in Ramadan fasting. The purpose of this study was to identify Ramadan major nutrient patterns among those who fast in Tehran, Iran. 510 fasting people aged 18-65 years and BMI 18.5-40 Kg/m2 were recruited in our study by 2-stage cluster sampling method in June-July 2014. Data on the socio-demographic and physical activity level were collected by questionnaire. Usual diet during Ramadan was estimated by valid and reliable food frequency questionnaire. BMI was calculated based on measured height and weight. Three nutrient patterns derived by conducting principal component factor analysis on 30 major nutrients. Micronutrient and fiber pattern which characterized by high intake of vitamin K, total fiber, iron, manganese, magnesium, β-carotene, folate, vitamin B12, potassium and calcium was adversely associated with weight (b=-0.16, P= 0.004. High protein pattern had great loadings on protein, riboflavin, phosphorous and zinc which physical activity level was decreased by tertiles of this pattern (b=0.13, P=0.02. High carbohydrate pattern which presented high positive loadings on carbohydrate and thiamin and negative loading on total fat, poly unsaturated fatty acids and monounsaturated fatty acids was positively associated with BMI (b= 0.12, P=0.03. Adherence to different Ramadan nutrient patterns is associated with weight, BMI and physical activity level. People on high in carbohydrate may have a higher BMI and low micronutrient density diet that should be considered in Ramadan fasting nutrition educational programs.

  2. Key factors for a high-quality peritoneal dialysis program--the role of the PD team and continuous quality improvement.

    Science.gov (United States)

    Fang, Wei; Ni, Zhaohui; Qian, Jiaqi

    2014-06-01

    The proportion of end-stage renal disease (ESRD) patients on peritoneal dialysis (PD) has increased very fast in China over the last decade. Renji Hospital, affiliated with Shanghai Jiaotong University School of Medicine, is a recognized high-quality PD unit with a high PD utilization rate, excellent patient and technique survival (1-year and 5-year patient survival rate of 93% and 71%, and 1-year and 5-year technique survival of 96% and 82%, respectively), low peritonitis rate and a well-documented good quality of life of the treated patients. We believe that a dedicated and experienced PD team, a structured patient training program, continuous patient support, establishing and utilizing standardized protocols, starting PD with low dialysis dose, monitoring key performance indicators (KPIs), and continuous quality improvement (CQI) are the key factors underlying this successful PD program. Copyright © 2014 International Society for Peritoneal Dialysis.

  3. Integrated Pathology Informatics Enables High-Quality Personalized and Precision Medicine: Digital Pathology and Beyond.

    Science.gov (United States)

    Volynskaya, Zoya; Chow, Hung; Evans, Andrew; Wolff, Alan; Lagmay-Traya, Cecilia; Asa, Sylvia L

    2018-03-01

    - The critical role of pathology in diagnosis, prognosis, and prediction demands high-quality subspecialty diagnostics that integrates information from multiple laboratories. - To identify key requirements and to establish a systematic approach to providing high-quality pathology in a health care system that is responsible for services across a large geographic area. - This report focuses on the development of a multisite pathology informatics platform to support high-quality surgical pathology and hematopathology using a sophisticated laboratory information system and whole slide imaging for histology and immunohistochemistry, integrated with ancillary tools, including electron microscopy, flow cytometry, cytogenetics, and molecular diagnostics. - These tools enable patients in numerous geographic locations access to a model of subspecialty pathology that allows reporting of every specimen by the right pathologist at the right time. The use of whole slide imaging for multidisciplinary case conferences enables better communication among members of patient care teams. The system encourages data collection using a discrete data synoptic reporting module, has implemented documentation of quality assurance activities, and allows workload measurement, providing examples of additional benefits that can be gained by this electronic approach to pathology. - This approach builds the foundation for accurate big data collection and high-quality personalized and precision medicine.

  4. High-frequency background modulation fringe patterns based on a fringe-wavelength geometry-constraint model for 3D surface-shape measurement.

    Science.gov (United States)

    Liu, Xinran; Kofman, Jonathan

    2017-07-10

    A new fringe projection method for surface-shape measurement was developed using four high-frequency phase-shifted background modulation fringe patterns. The pattern frequency is determined using a new fringe-wavelength geometry-constraint model that allows only two corresponding-point candidates in the measurement volume. The correct corresponding point is selected with high reliability using a binary pattern computed from intensity background encoded in the fringe patterns. Equations of geometry-constraint parameters permit parameter calculation prior to measurement, thus reducing measurement computational cost. Experiments demonstrated the ability of the method to perform 3D shape measurement for a surface with geometric discontinuity, and for spatially isolated objects.

  5. Evolution of potent odorants within the volatile metabolome of high-quality hazelnuts (Corylus avellana L.): evaluation by comprehensive two-dimensional gas chromatography coupled with mass spectrometry.

    Science.gov (United States)

    Rosso, Marta Cialiè; Liberto, Erica; Spigolon, Nicola; Fontana, Mauro; Somenzi, Marco; Bicchi, Carlo; Cordero, Chiara

    2018-01-09

    Within the pattern of volatiles released by food products (volatilome), potent odorants are bio-active compounds that trigger aroma perception by activating a complex array of odor receptors (ORs) in the regio olfactoria. Their informative role is fundamental to select optimal post-harvest and storage conditions and preserve food sensory quality. This study addresses the volatile metabolome from high-quality hazelnuts (Corylus avellana L.) from the Ordu region (Turkey) and Tonda Romana from Italy, and investigates its evolution throughout the production chain (post-harvest, industrial storage, roasting) to find functional correlations between technological strategies and product quality. The volatile metabolome is analyzed by headspace solid-phase microextration combined with comprehensive two-dimensional gas chromatography and mass spectrometry. Dedicated pattern recognition, based on 2D data (targeted fingerprinting), is used to mine analytical outputs, while principal component analysis (PCA), Fisher ratio, hierarchical clustering, and analysis of variance are used to find decision makers among the most informative chemicals. Low-temperature drying (18-20 °C) has a decisive effect on quality; it correlates negatively with bacteria and mold metabolic activity, nut viability, and lipid oxidation products (2-methyl-1-propanol, 3-methyl-1-butanol, 2-ethyl-1-hexanol, 2-octanol, 1-octen-3-ol, hexanal, octanal and (E)-2-heptanal). Protective atmosphere storage (99% N 2 -1% O 2 ) effectively limits lipid oxidation for 9-12 months after nut harvest. The combination of optimal drying and storage preserves the aroma potential; after roasting at different shelf-lives, key odorants responsible for malty and buttery (2- and 3-methylbutanal, 2,3-butanedione and 2,3-pentanedione), earthy (methylpyrazine, 2-ethyl-5-methyl pyrazine and 3-ethyl-2,5-dimethyl pyrazine) and caramel-like and musty notes (2,5-dimethyl-4-hydroxy-3(2H)-furanone - furaneol and acetyl pyrrole) show no

  6. Recent developments in high-quality drying of vegetables, fruits, and aquatic products.

    Science.gov (United States)

    Zhang, Min; Chen, Huizhi; Mujumdar, Arun S; Tang, Juming; Miao, Song; Wang, Yuchuan

    2017-04-13

    Fresh foods like vegetables, fruits, and aquatic products have high water activity and they are highly heat-sensitive and easily degradable. Dehydration is one of the most common methods used to improve food shelf-life. However, drying methods used for food dehydration must not only be efficient and economic but also yield high-quality products based on flavor, nutrients, color, rehydration, uniformity, appearance, and texture. This paper reviews some new drying technologies developed for dehydration of vegetables, fruits, and aquatic products. These include: infrared drying, microwave drying, radio frequency drying, electrohydrodynamic drying, etc., as well as hybrid drying methods combining two or more different drying techniques. A comprehensive review of recent developments in high-quality drying of vegetables, fruits and aquatic products is presented and recommendations are made for future research.

  7. High-quality ZnO growth, doping, and polarization effect

    Science.gov (United States)

    Kun, Tang; Shulin, Gu; Jiandong, Ye; Shunming, Zhu; Rong, Zhang; Youdou, Zheng

    2016-03-01

    The authors have reported their recent progress in the research field of ZnO materials as well as the corresponding global advance. Recent results regarding (1) the development of high-quality epitaxy techniques, (2) the defect physics and the Te/N co-doping mechanism for p-type conduction, and (3) the design, realization, and properties of the ZnMgO/ZnO hetero-structures have been shown and discussed. A complete technology of the growth of high-quality ZnO epi-films and nano-crystals has been developed. The co-doping of N plus an iso-valent element to oxygen has been found to be the most hopeful path to overcome the notorious p-type hurdle. High mobility electrons have been observed in low-dimensional structures utilizing the polarization of ZnMgO and ZnO. Very different properties as well as new physics of the electrons in 2DEG and 3DES have been found as compared to the electrons in the bulk. Project supported by the National Natural Science Foundation of China (Nos. 61025020, 61274058, 61322403, 61504057, 61574075), the Natural Science Foundation of Jiangsu Province (Nos. BK2011437, BK20130013, BK20150585), the Priority Academic Program Development of Jiangsu Higher Education Institutions, and the Fundamental Research Funds for the Central Universities.

  8. NSLS-II filling pattern measurement

    International Nuclear Information System (INIS)

    Yong Hu; Dalesio, L.B.; Kiman Ha; Pinayev, I.

    2012-01-01

    Multi-bunch injection will be deployed at NSLS-II. High bandwidth diagnostic beam monitors with high speed digitizers are used to measure bunch-by-bunch charge variation. In order to minimize intensity-correlated orbit oscillations due to uneven bunch patterns, we need to measure the filling pattern (also named bunch pattern or bunch structure). This paper focuses on filling pattern measurements: how to measure bunch structure and make this information available in EPICS-based control system. This measurement requires combination of 3 types of beam monitors (Wall Current Monitor, Fast Current Transformer and Beam Position Monitor), data acquisition and controls (fast digitizer, EPICS software, etc.) and Event Timing system. High-bandwidth filling pattern monitor requires high-speed digitizer to sample its analog output signal. The evaluation results of commercial fast digitizer Agilent Acqiris and high bandwidth detector Bergoz FCT are presented. We have also tested the algorithm software for filling pattern measurement as well as the interface to event timing system. It appears that filling pattern measurement system is well understood and the tests for control hardware and software have given good results

  9. A practical approach to optimizing the preparation of speckle patterns for digital-image correlation

    International Nuclear Information System (INIS)

    Lionello, Giacomo; Cristofolini, Luca

    2014-01-01

    The quality of strain measurements by digital image correlation (DIC) strongly depends on the quality of the pattern on the specimen’s surface. An ideal pattern should be highly contrasted, stochastic, and isotropic. In addition, the speckle pattern should have an average size that exceeds the image pixel size by a factor of 3–5. (Smaller speckles cause poor contrast, and larger speckles cause poor spatial resolution.) Finally, the ideal pattern should have a limited scatter in terms of speckle sizes. The aims of this study were: (i) to define the ideal speckle size in relation to the specimen size and acquisition system; (ii) provide practical guidelines to identify the optimal settings of an airbrush gun, in order to produce a pattern that is as close as possible to the desired one while minimizing the scatter of speckle sizes. Patterns of different sizes were produced using two different airbrush guns with different settings of the four most influential factors (dilution, airflow setting, spraying distance, and air pressure). A full-factorial DOE strategy was implemented to explore the four factors at two levels each: 36 specimens were analyzed for each of the 16 combinations. The images were acquired using the digital cameras of a DIC system. The distribution of speckle sizes was analyzed to calculate the average speckle size and the standard deviation of the corresponding truncated Gaussian distribution. A mathematical model was built to enable prediction of the average speckle size in relation to the airbrush gun settings. We showed that it is possible to obtain a pattern with a highly controlled average and a limited scatter of speckle sizes, so as to match the ideal distribution of speckle sizes for DIC. Although the settings identified here apply only to the specific equipment being used, this method can be adapted to any airbrush to produce a desired speckle pattern. (technical design note)

  10. A NEW APPROACH FOR IMPROVING QUALITY OF WEB APPLICATIONS USING DESIGN PATTERNS

    OpenAIRE

    J. Srikanth R. Savithri

    2012-01-01

    Design patterns are descriptions of communicating objects and classes that are customized to solve a general design problem in a particular context, they describes the problem and its corresponding solution. Professional software engineers always use Design patterns for introducing abstractions in software and by the way they can build complex web applications. The right adoption of Design Patterns while designing web applications can promote the factors like reusability and consistency of th...

  11. Patterned, highly stretchable and conductive nanofibrous PANI/PVDF strain sensors based on electrospinning and in situ polymerization

    Science.gov (United States)

    Yu, Gui-Feng; Yan, Xu; Yu, Miao; Jia, Meng-Yang; Pan, Wei; He, Xiao-Xiao; Han, Wen-Peng; Zhang, Zhi-Ming; Yu, Liang-Min; Long, Yun-Ze

    2016-01-01

    A facile fabrication strategy via electrospinning and followed by in situ polymerization to fabricate a patterned, highly stretchable, and conductive polyaniline/poly(vinylidene fluoride) (PANI/PVDF) nanofibrous membrane is reported. Owing to the patterned structure, the nanofibrous PANI/PVDF strain sensor can detect a strain up to 110%, for comparison, which is 2.6 times higher than the common nonwoven PANI/PVDF mat and much larger than the previously reported values (usually less than 15%). Meanwhile, the conductivity of the patterned strain sensor shows a linear response to the applied strain in a wide range from 0% to about 85%. Additionally, the patterned PANI/PVDF strain sensor can completely recover to its original electrical and mechanical values within a strain range of more than 22%, and exhibits good durability over 10 000 folding-unfolding tests. Furthermore, the strain sensor also can be used to detect finger motion. The results demonstrate promising application of the patterned nanofibrous membrane in flexible electronic fields.A facile fabrication strategy via electrospinning and followed by in situ polymerization to fabricate a patterned, highly stretchable, and conductive polyaniline/poly(vinylidene fluoride) (PANI/PVDF) nanofibrous membrane is reported. Owing to the patterned structure, the nanofibrous PANI/PVDF strain sensor can detect a strain up to 110%, for comparison, which is 2.6 times higher than the common nonwoven PANI/PVDF mat and much larger than the previously reported values (usually less than 15%). Meanwhile, the conductivity of the patterned strain sensor shows a linear response to the applied strain in a wide range from 0% to about 85%. Additionally, the patterned PANI/PVDF strain sensor can completely recover to its original electrical and mechanical values within a strain range of more than 22%, and exhibits good durability over 10 000 folding-unfolding tests. Furthermore, the strain sensor also can be used to detect finger

  12. Methods and systems for fabricating high quality superconducting tapes

    Energy Technology Data Exchange (ETDEWEB)

    Majkic, Goran; Selvamanickam, Venkat

    2018-02-13

    An MOCVD system fabricates high quality superconductor tapes with variable thicknesses. The MOCVD system can include a gas flow chamber between two parallel channels in a housing. A substrate tape is heated and then passed through the MOCVD housing such that the gas flow is perpendicular to the tape's surface. Precursors are injected into the gas flow for deposition on the substrate tape. In this way, superconductor tapes can be fabricated with variable thicknesses, uniform precursor deposition, and high critical current densities.

  13. Diffusion Patterns in Convergence among High-Technology Industries: A Co-Occurrence-Based Analysis of Newspaper Article Data

    Directory of Open Access Journals (Sweden)

    Hyeokseong Lee

    2016-10-01

    Full Text Available Firms in high-technology industries have faced great technological and market uncertainty and volatility in the past few decades. In order to be competitive and sustainable in this environment, firms have been pursuing technological innovation, product differentiation, vertical integration, and alliances, which eventually drive industry convergence, defined as the process of blurring boundaries between previously distinct industries. Although industry convergence has greatly affected industrial structure and the economy, little research has investigated this phenomenon, especially its diffusion patterns; thus, it is still unclear which industries are converging more rapidly or have a higher potential for convergence. This paper explores these issues by investigating industry convergence in U.S. high-technology industries, using a large set of newspaper articles from 1987 to 2012. We perform a co-occurrence-based analysis to obtain information on industry convergence and estimate its diffusion patterns using an internal-influence logistic model. We find heterogeneous diffusion patterns, depending on convergent-industry pairs and their wide dispersion. In addition, we find that the potential degree of industry convergence is significantly negatively associated with its growth rate, which indicates that a great deal of time will be required for industry convergence between high-technology industries with this high potential to achieve a high degree of convergence.

  14. Food patterns and dietary quality associated with organic food consumption during pregnancy; data from a large cohort of pregnant women in Norway.

    Science.gov (United States)

    Torjusen, Hanne; Lieblein, Geir; Næs, Tormod; Haugen, Margaretha; Meltzer, Helle Margrete; Brantsæter, Anne Lise

    2012-08-06

    Little is known about the consumption of organic food during pregnancy. The aim of this study was to describe dietary characteristics associated with frequent consumption of organic food among pregnant women participating in the Norwegian Mother and Child Cohort Study (MoBa). The present study includes 63 808 women who during the years 2002-2007 answered two questionnaires, a general health questionnaire at gestational weeks 15 and a food frequency questionnaire at weeks 17-22. The exploration of food patterns by Principal component analyses (PCA) was followed by ANOVA analyses investigating how these food patterns as well as intake of selected food groups were associated with consumption of organic food. The first principal component (PC1) identified by PCA, accounting for 12% of the variation, was interpreted as a 'health and sustainability component', with high positive loadings for vegetables, fruit and berries, cooking oil, whole grain bread and cereal products and negative loadings for meat, including processed meat, white bread, and cakes and sweets. Frequent consumption of organic food, which was reported among 9.1% of participants (n = 5786), was associated with increased scores on the 'health and sustainability component' (p organic food had a diet with higher density of fiber and most nutrients such as folate, beta-carotene and vitamin C, and lower density of sodium compared to participants with no or low organic consumption. The present study showed that pregnant Norwegian women reporting frequent consumption of organically produced food had dietary pattern and quality more in line with public advice for healthy and sustainable diets. A methodological implication is that the overall diet needs to be included in future studies of potential health outcomes related to consumption of organic food during pregnancy.

  15. Food patterns and dietary quality associated with organic food consumption during pregnancy; data from a large cohort of pregnant women in Norway

    Science.gov (United States)

    2012-01-01

    Background Little is known about the consumption of organic food during pregnancy. The aim of this study was to describe dietary characteristics associated with frequent consumption of organic food among pregnant women participating in the Norwegian Mother and Child Cohort Study (MoBa). Methods The present study includes 63 808 women who during the years 2002–2007 answered two questionnaires, a general health questionnaire at gestational weeks 15 and a food frequency questionnaire at weeks 17-22. The exploration of food patterns by Principal component analyses (PCA) was followed by ANOVA analyses investigating how these food patterns as well as intake of selected food groups were associated with consumption of organic food. Results The first principal component (PC1) identified by PCA, accounting for 12% of the variation, was interpreted as a ‘health and sustainability component’, with high positive loadings for vegetables, fruit and berries, cooking oil, whole grain bread and cereal products and negative loadings for meat, including processed meat, white bread, and cakes and sweets. Frequent consumption of organic food, which was reported among 9.1% of participants (n = 5786), was associated with increased scores on the ‘health and sustainability component’ (p food had a diet with higher density of fiber and most nutrients such as folate, beta-carotene and vitamin C, and lower density of sodium compared to participants with no or low organic consumption. Conclusion The present study showed that pregnant Norwegian women reporting frequent consumption of organically produced food had dietary pattern and quality more in line with public advice for healthy and sustainable diets. A methodological implication is that the overall diet needs to be included in future studies of potential health outcomes related to consumption of organic food during pregnancy. PMID:22862737

  16. Dietary patterns and colorectal cancer.

    Science.gov (United States)

    Tayyem, Reema F; Bawadi, Hiba A; Shehadah, Ihab; Agraib, Lana M; AbuMweis, Suhad S; Al-Jaberi, Tareq; Al-Nusairr, Majed; Bani-Hani, Kamal E; Heath, Dennis D

    2017-06-01

    Dietary pattern and lifestyle have been reported to be important risk factors in the development of colorectal cancer (CRC). However, the mechanism of action of dietary factors in CRC disease is unclear. The aim of this study is the examination of several dietary choices and their potential association with the risk of developing CRC. Dietary data was collected from 220 subjects who were previously diagnosed with CRC, and 281 control subjects (matched by age, gender, occupation and marital status). The data was collected between January 2010 and December 2012, using interview-based questionnaires. Multivariate logistic regression was used to estimate the relationship between dietary choices and risk of developing colorectal cancer. Factor analysis revealed three major dietary patterns. The first pattern we identified as the "Healthy Pattern", the second was identified as "High Sugar/High Tea Pattern" and the third as "Western Pattern". In the Healthy Pattern group we found a 10.54% variation in food intake, while the intake variation was 11.64% in the Western Pattern. After adjusting for confounding factors, the Western Pattern food choice was found to be significantly associated with an increased risk of developing CRC (OR = 1.88; 95% CI = 1.12-3.16). The results for the Healthy and High-Sugar/High Tea Patterns showed a decrease, but the statistic was not significant for the risk of CRC development. The Western Pattern of dietary choice was directly associated with CRC. The association between the dietary food choice in the Healthy and High-Sugar/High Tea Patterns and colorectal cancer needs further study in our Jordanian population. Copyright © 2016 Elsevier Ltd and European Society for Clinical Nutrition and Metabolism. All rights reserved.

  17. Production of high quality water for oil sands application

    Energy Technology Data Exchange (ETDEWEB)

    Beaudette-Hodsman, C.; Macleod, B. [Pall Corp., Mississauga, ON (Canada); Venkatadri, R. [Pall Corp., East Hills, NY (United States)

    2008-10-15

    This paper described a pressurized microfiltration membrane system installed at an oil sands extraction site in Alberta. The system was designed to complement a reverse osmosis (RO) system installed at the site to produce the high quality feed water required by the system's boilers. Groundwater in the region exhibited moderate total suspended solids and high alkalinity and hardness levels, and the RO system required feed water with a silt density index of 3 or less. The conventional pretreatment system used at the site was slowing down production due to the severe fouling of the RO membranes. The new microfiltration system contained an automated PVDF hollow fiber microfiltration membrane system contained in a trailer. Suspended particles and bacteria were captured within the filter, and permeate was sent to the RO unit. Within 6 hours of being installed, the unit was producing water with SDI values in the range of 1.0 to 2.5. It was concluded that the microfiltration system performed reliably regardless of wide variations in feed water quality and flow rates. 3 refs., 1 tab., 8 figs.

  18. Feasibility of using of a simplified question in assessing diet quality of adolescents.

    Science.gov (United States)

    Rodrigues, Paulo Rogério Melo; Gonçalves-Silva, Regina Maria Veras; Ferreira, Márcia Gonçalves; Pereira, Rosangela Alves

    2017-05-01

    This study aims to analyze the applicability of a simplified question in assessing diet quality of adolescents in a cross-sectional school-based study carried out in a sample of high school students. Diet quality self-perception was obtained when the participant was inquired about own diet considering "excellent", "good", "fair" or "poor" responses. We evaluated meals habits and food intake through food frequency questionnaire. The revised version of the Brazilian Healthy Eating Index (BHEI-R) was estimated and we identified three dietary patterns using factor analysis. "Good" self-perceived diet quality was reported by 56% of adolescents and was associated with regular consumption of fruits and vegetables, meal profile and high healthy eating index scores. However, consumption of foods harmful to health was not perceived as characteristic that affects diet quality. The evaluated question showed sensitivity of 28% to detect good quality diets and specificity of 79% to identify low nutritional value diets. The use of a simplified question to assess dietary habits of adolescents is limited, since the consumption of high-fat, high-sugar and high-sodium food was not recognized as an indicator of low quality diet.

  19. Links among high-performance work environment, service quality, and customer satisfaction: an extension to the healthcare sector.

    Science.gov (United States)

    Scotti, Dennis J; Harmon, Joel; Behson, Scott J

    2007-01-01

    Healthcare managers must deliver high-quality patient services that generate highly satisfied and loyal customers. In this article, we examine how a high-involvement approach to the work environment of healthcare employees may lead to exceptional service quality, satisfied patients, and ultimately to loyal customers. Specifically, we investigate the chain of events through which high-performance work systems (HPWS) and customer orientation influence employee and customer perceptions of service quality and patient satisfaction in a national sample of 113 Veterans Health Administration ambulatory care centers. We present a conceptual model for linking work environment to customer satisfaction and test this model using structural equations modeling. The results suggest that (1) HPWS is linked to employee perceptions of their ability to deliver high-quality customer service, both directly and through their perceptions of customer orientation; (2) employee perceptions of customer service are linked to customer perceptions of high-quality service; and (3) perceived service quality is linked with customer satisfaction. Theoretical and practical implications of our findings, including suggestions of how healthcare managers can implement changes to their work environments, are discussed.

  20. Spatial patterning of water quality in Biscayne Bay, Florida as a function of land use and water management.

    Science.gov (United States)

    Caccia, Valentina G; Boyer, Joseph N

    2005-11-01

    An objective classification analysis was performed on a water quality data set from 25 sites collected monthly during 1994-2003. The water quality parameters measured included: TN, TON, DIN, NH4+, NO3-, NO2-, TP, SRP, TN:TP ratio, TOC, DO, CHL A, turbidity, salinity and temperature. Based on this spatial analysis, Biscayne Bay was divided into five zones having similar water quality characteristics. A robust nutrient gradient, driven mostly by dissolved inorganic nitrogen, from alongshore to offshore in the main Bay, was a large determinant in the spatial clustering. Two of these zones (Alongshore and Inshore) were heavily influenced by freshwater input from four canals which drain the South Dade agricultural area, Black Point Landfill, and sewage treatment plant. The North Bay zone, with high turbidity, phytoplankton biomass, total phosphorus, and low DO, was affected by runoff from five canals, the Munisport Landfill, and the urban landscape. The South Bay zone, an embayment surrounded by mangrove wetlands with little urban development, was high in dissolved organic constituents but low in inorganic nutrients. The Main Bay was the area most influenced by water exchange with the Atlantic Ocean and showed the lowest nutrient concentrations. The water quality in Biscayne Bay is therefore highly dependent of the land use and influence from the watershed.

  1. Beverage consumption patterns among 4-19 y old children in 2009-14 NHANES show that the milk and 100% juice pattern is associated with better diets.

    Science.gov (United States)

    Maillot, Matthieu; Rehm, Colin D; Vieux, Florent; Rose, Chelsea M; Drewnowski, Adam

    2018-05-24

    Patterns of beverage consumption among children and adolescents can be indicative of food choices and total diet quality. Analyses of beverage consumption patterns among 8119 children aged 4-19 y were based on the first 24-h recall of the National Health and Nutrition Examination Survey (2009-14 NHANES). Four pre-defined beverage patterns were: 1) milk pattern; 2) 100% juice pattern; 3) milk and 100% juice pattern; and 4) other caloric beverages. Food- and nutrient-based diet quality measures included the Healthy Eating Index 2010. Most children drank other caloric beverages, as opposed to milk (17.8%), 100% juice (5.6%), or milk and 100% juice (13.5%). Drinkers of milk and 100% juice had diets that did not differ from each other in total calories, total and added sugars, fiber, or vitamin E. Milk drinkers consumed more dairy and had higher intakes of calcium, potassium, vitamin A and vitamin D as compared to all other patterns. Juice drinkers consumed more total fruit, same amounts of whole fruit, and had higher intakes of vitamin C as compared to the other consumption patterns. Drinkers of both milk and 100% juice had the highest HEI 2010 scores of all the consumption patterns. Beverage consumption patterns built around milk and/or 100% juice were relatively uncommon. Promoting the drinking of milk and 100% juice, in preference to other caloric beverages, may be an effective strategy to improve children's diet quality. Restricting milk and 100% juice consumption may encourage the selection of other caloric beverages.

  2. High brightness--multiple beamlets source for patterned X-ray production

    Science.gov (United States)

    Leung, Ka-Ngo [Hercules, CA; Ji, Qing [Albany, CA; Barletta, William A [Oakland, CA; Jiang, Ximan [El Cerrito, CA; Ji, Lili [Albany, CA

    2009-10-27

    Techniques for controllably directing beamlets to a target substrate are disclosed. The beamlets may be either positive ions or electrons. It has been shown that beamlets may be produced with a diameter of 1 .mu.m, with inter-aperture spacings of 12 .mu.m. An array of such beamlets, may be used for maskless lithography. By step-wise movement of the beamlets relative to the target substrate, individual devices may be directly e-beam written. Ion beams may be directly written as well. Due to the high brightness of the beamlets from extraction from a multicusp source, exposure times for lithographic exposure are thought to be minimized. Alternatively, the beamlets may be electrons striking a high Z material for X-ray production, thereafter collimated to provide patterned X-ray exposures such as those used in CAT scans. Such a device may be used for remote detection of explosives.

  3. Physical activity patterns of college students with and without high school physical education.

    Science.gov (United States)

    Everhart, Brett; Kernodle, Michael; Ballard, Kesley; McKey, Cathy; Eason, Billy; Weeks, Megan

    2005-06-01

    The purpose of this study was to examine differences in physical activity patterns of high school graduates in Texas who completed physical education class credit during high school and those who did not but who were varsity athletes. A questionnaire was designed and tested for reliability prior to being administered to 201 college students. Analysis indicated that participants who completed high school physical education class credit do not currently participate in regular physical activity as much as those who were not required to complete such credit. Conversely, athletes who did not participate in physical education reported currently engaging in more cardiovascular exercise and team sports than the physical education students during high school.

  4. Antenatal dietary patterns and depressive symptoms during pregnancy and early post-partum.

    Science.gov (United States)

    Baskin, Rachel; Hill, Briony; Jacka, Felice N; O'Neil, Adrienne; Skouteris, Helen

    2017-01-01

    Perinatal depression is a debilitating disorder experienced during pregnancy and/or the first year post-partum. Recently, maternal dietary intake during pregnancy has emerged as a possible area of intervention for the prevention of mental disorders in women and their offspring. However, the relationship between antenatal diet quality and perinatal depressive symptoms remains poorly understood. The current study explored the predictive role of antenatal diet quality for antenatal and post-natal depressive symptoms. Pregnant women (n = 167) were recruited between February 2010 and December 2011. Women completed the Edinburgh Postnatal Depression Scale at time 1 [T1, mean weeks gestation = 16.70, standard deviation (SD) = 0.91], time 2 (T2, mean weeks gestation = 32.89, SD = 0.89) and time 3 (T3, mean weeks post-partum = 13.51, SD = 1.97) and a food frequency questionnaire at T1 and T2. Diet quality was determined by extracting dietary patterns via principal components analysis. Two dietary patterns were identified: 'healthy' (including fruit, vegetables, fish and whole grains) and 'unhealthy' (including sweets, refined grains, high-energy drinks and fast foods). Associations between dietary patterns and depressive symptoms were investigated by path analyses. While both 'healthy' and 'unhealthy' path models showed good fit, only one significant association consistent with study hypotheses was found, an 'unhealthy' diet was associated with increased depressive symptoms at 32 weeks gestation. Given that this association was cross-sectional, it was not possible to make any firm conclusions about the predictive nature of either dietary patterns or depressive symptoms. Dietary intervention studies or larger prospective studies are therefore recommended. © 2015 John Wiley & Sons Ltd.

  5. Does High School Facility Quality Affect Student Achievement? A Two-Level Hierarchical Linear Model

    Science.gov (United States)

    Bowers, Alex J.; Urick, Angela

    2011-01-01

    The purpose of this study is to isolate the independent effects of high school facility quality on student achievement using a large, nationally representative U.S. database of student achievement and school facility quality. Prior research on linking school facility quality to student achievement has been mixed. Studies that relate overall…

  6. Normative data on the diurnal pattern of the Karolinska Sleepiness Scale ratings and its relation to age, sex, work, stress, sleep quality and sickness absence/illness in a large sample of daytime workers.

    Science.gov (United States)

    Åkerstedt, Torbjorn; Hallvig, David; Kecklund, Göran

    2017-10-01

    Self-rated sleepiness responds to sleep loss, time of day and work schedules. There is, however, a lack of a normative reference showing the diurnal pattern during a normal working day, compared with a day off, as well as differences depending on stress, sleep quality, sex, age and being sick listed. The present study sought to provide such data for the Karolinska Sleepiness Scale. Participants were 431 individuals working in medium-sized public service units. Sleepiness (Karolinska Sleepiness Scale, scale 1-9) was rated at six times a day for a working week and 2 days off (>90.000 ratings). The results show a clear circadian pattern, with high values during the morning (4.5 at 07:00 hours) and evening (6.0 at 22:00 hours), and with low values (3-4) during the 10:00-16:00 hours span. Women had significantly higher (0.5 units) Karolinska Sleepiness Scale values than men, as did younger individuals (0.3 units), those with stress (1.3 units above the low-stress group) and those with poor sleep quality (1.0 units above those with qood sleep quality). Days off showed reduced sleepiness (0.7 units), while being sick listed was associated with an increased sleepiness (0.8 units). Multiple regression analysis of mean sleepiness during the working week yielded mean daytime stress, mean sleep quality, age, and sex as predictors (not sleep duration). Improved sleep quality accounted for the reduced sleepiness during days off, but reduced stress was a second factor. Similar results were obtained in a longitudinal mixed-model regression analysis across the 7 days of the week. The percentage of ratings at Karolinska Sleepiness Scale risk levels (8 + 9) was 6.6%, but most of these were obtained at 22:00 hours. It was concluded that sleepiness ratings are strongly associated with time of day, sleep quality, stress, work day/day off, being ill, age, and sex. © 2017 European Sleep Research Society.

  7. Development of new technologies for high quality thin film and its application to energy engineering; Hikari seigyo to sokudo senbetsu ni yoru chokinshitsu usumaku no seisaku to energy bun`ya eno tekiyo

    Energy Technology Data Exchange (ETDEWEB)

    Hijikata, K; Inoue, T; Nagasaki, T; Suzuki, Y; Sato, I [Tokyo Institute of Technology, Tokyo (Japan); Nakabeppu, O [The University of Tokyo, Tokyo (Japan). Faculty of Engineering

    1997-02-01

    This paper describes laser irradiation and velocity selective deposition experiments for fabricating high quality thin films. For the formation of Ag thin film by vacuum deposition method, YAG laser was irradiated to atoms or clusters parallel or perpendicular to the NaCl single crystal substrate, to deposit them on the substrate. For another experiment, Ag atoms selected in the given velocity were deposited on the (001) NaCl substrate by passing the molecular beam through the velocity selector. When laser was not irradiated, the thin film showed a random structure. Epitaxial growth was accelerated by the laser irradiation. When the selective velocity was set in 353 m/s at the constant intensity of molecular beam, the diffraction pattern of the thin film showed net pattern. When the selective velocity was set in 529 m/s, a structure in which ring pattern was overlapped on the net pattern was obtained. 2 figs.

  8. (-201) β-Gallium oxide substrate for high quality GaN materials

    KAUST Repository

    Roqan, Iman S.

    2015-03-13

    (-201) oriented β-Ga2O3 has the potential to be used as a transparent and conductive substrate for GaN-growth. The key advantages of Ga2O3 are its small lattice mismatches (4.7%), appropriate structural, thermal and electrical properties and a competitive price compared to other substrates. Optical characterization show that GaN layers grown on (-201) oriented β-Ga2O3 are dominated by intense bandedge emission with a high luminescence efficiency. Atomic force microscopy studies show a modest threading dislocation density of ~108 cm-2, while complementary Raman spectroscopy indicates that the GaN epilayer is of high quality with slight compressive strain. Room temperature time-findings suggest that the limitation of the photoluminescence lifetime (~500 ps) is due to nonradiative recombination arising from threading dislocation. Therefore, by optimizing the growth conditions, high quality material with significant optical efficiency can be obtained.

  9. Facile growth of a single-crystal pattern: a case study of HKUST-1.

    Science.gov (United States)

    Li, Shaozhou; Lu, Guang; Huang, Xiao; Li, Hai; Sun, Yinghui; Zhang, Hua; Chen, Xiaodong; Huo, Fengwei

    2012-12-18

    In order to fabricate metal-organic framework (MOF) based devices, it is desirable to precisely position high-quality and mono-sized MOF crystals on supports. In this work, we demonstrate a facile solution procedure for the fabrication of oriented and monodispersed single-crystal MOF pattern. We expect that such capability will expand the scope of applications of MOFs to advanced fields.

  10. Approaches to hazard-oriented groundwater management based on multivariate analysis of groundwater quality

    OpenAIRE

    Page, Rebecca Mary

    2011-01-01

    Drinking water extracted near rivers in alluvial aquifers is subject to potential microbial contamination due to rapidly infiltrating river water during high discharge events. The heterogeneity of river-groundwater interaction and hydrogeological characteristics of the aquifer renders a complex pattern of groundwater quality. The quality of the extracted drinking water can be managed using decision support and HACCP (Hazard Analysis and Critical Control Point) systems, but the detection of po...

  11. High quality voice synthesis middle ware; Kohinshitsu onsei gosei middle war

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    Toshiba Corp. newly developed a natural voice synthesis system, TOS Drive TTS (TOtally speaker Driven Text-To-Speech) system, in which natural high-quality read-aloud is greatly improved, and also developed as its application a voice synthesis middle ware. In the newly developed system, using as a model a narrator's voice recorded preliminarily, a metrical control dictionary is automatically learned that reproduces the characteristics of metrical patters such as intonation or rhythm of a human voice, as is a voice bases dictionary that reproduces the characteristics of a voice quality, enabling natural voice synthesis to be realized that picks up human voice characteristics. The system is high quality and also very compact, while the voice synthesis middle ware utilizing this technology is adaptable to various platforms such as MPU or OS. The system is very suitable for audio response in the ITS field having car navigation systems as the core; besides, expanded application is expected to an audio response system that used to employ a sound recording and reproducing system. (translated by NEDO)

  12. Comparison of good- and bad-quality cork: application of high-throughput sequencing of phellogenic tissue.

    Science.gov (United States)

    Teixeira, Rita Teresa; Fortes, Ana Margarida; Pinheiro, Carla; Pereira, Helena

    2014-09-01

    Cork is one of the most valuable non-wood forest products and plays an important role in Mediterranean economies. The production of high-quality cork is dependent on both genome and environment, posing constraints on the industry because an ever-growing amount of bad-quality cork (BQC) development has been observed. In order to identify genes responsible for production of cork of superior quality we performed a comparative analysis using the 454 pyrosequencing approach on phellogenic tissue of good- and bad-quality samples. The transcriptional profiling showed a high number of genes differentially expressed (8.48%) from which 78.8% displayed annotation. Genes more highly represented in BQC are involved in DNA synthesis, RNA processing, proteolysis, and transcription factors related to the abiotic stress response. Putative stomatal/lenticular-associated genes which may be responsible for the disadvantageous higher number of lenticular channels in BQC are also more highly represented. BQC also showed an elevated content of free phenolics. On the other hand, good-quality cork (GQC) can be distinguished by highly expressed genes encoding heat-shock proteins. Together the results provide valuable new information about the molecular events leading to cork formation and provide putative biomarkers associated with cork quality that can be useful in breeding programmes. © The Author 2014. Published by Oxford University Press on behalf of the Society for Experimental Biology. All rights reserved. For permissions, please email: journals.permissions@oup.com.

  13. A Flexible High-Performance Photoimaging Device Based on Bioinspired Hierarchical Multiple-Patterned Plasmonic Nanostructures.

    Science.gov (United States)

    Lee, Yoon Ho; Lee, Tae Kyung; Kim, Hongki; Song, Inho; Lee, Jiwon; Kang, Saewon; Ko, Hyunhyub; Kwak, Sang Kyu; Oh, Joon Hak

    2018-03-01

    In insect eyes, ommatidia with hierarchical structured cornea play a critical role in amplifying and transferring visual signals to the brain through optic nerves, enabling the perception of various visual signals. Here, inspired by the structure and functions of insect ommatidia, a flexible photoimaging device is reported that can simultaneously detect and record incoming photonic signals by vertically stacking an organic photodiode and resistive memory device. A single-layered, hierarchical multiple-patterned back reflector that can exhibit various plasmonic effects is incorporated into the organic photodiode. The multiple-patterned flexible organic photodiodes exhibit greatly enhanced photoresponsivity due to the increased light absorption in comparison with the flat systems. Moreover, the flexible photoimaging device shows a well-resolved spatiotemporal mapping of optical signals with excellent operational and mechanical stabilities at low driving voltages below half of the flat systems. Theoretical calculation and scanning near-field optical microscopy analyses clearly reveal that multiple-patterned electrodes have much stronger surface plasmon coupling than flat and single-patterned systems. The developed methodology provides a versatile and effective route for realizing high-performance optoelectronic and photonic systems. © 2018 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  14. Context, culture and (non-verbal) communication affect handover quality.

    Science.gov (United States)

    Frankel, Richard M; Flanagan, Mindy; Ebright, Patricia; Bergman, Alicia; O'Brien, Colleen M; Franks, Zamal; Allen, Andrew; Harris, Angela; Saleem, Jason J

    2012-12-01

    Transfers of care, also known as handovers, remain a substantial patient safety risk. Although research on handovers has been done since the 1980s, the science is incomplete. Surprisingly few interventions have been rigorously evaluated and, of those that have, few have resulted in long-term positive change. Researchers, both in medicine and other high reliability industries, agree that face-to-face handovers are the most reliable. It is not clear, however, what the term face-to-face means in actual practice. We studied the use of non-verbal behaviours, including gesture, posture, bodily orientation, facial expression, eye contact and physical distance, in the delivery of information during face-to-face handovers. To address this question and study the role of non-verbal behaviour on the quality and accuracy of handovers, we videotaped 52 nursing, medicine and surgery handovers covering 238 patients. Videotapes were analysed using immersion/crystallisation methods of qualitative data analysis. A team of six researchers met weekly for 18 months to view videos together using a consensus-building approach. Consensus was achieved on verbal, non-verbal, and physical themes and patterns observed in the data. We observed four patterns of non-verbal behaviour (NVB) during handovers: (1) joint focus of attention; (2) 'the poker hand'; (3) parallel play and (4) kerbside consultation. In terms of safety, joint focus of attention was deemed to have the best potential for high quality and reliability; however, it occurred infrequently, creating opportunities for education and improvement. Attention to patterns of NVB in face-to-face handovers coupled with education and practice can improve quality and reliability.

  15. Fabrication of high-quality single-crystal Cu thin films using radio-frequency sputtering.

    Science.gov (United States)

    Lee, Seunghun; Kim, Ji Young; Lee, Tae-Woo; Kim, Won-Kyung; Kim, Bum-Su; Park, Ji Hun; Bae, Jong-Seong; Cho, Yong Chan; Kim, Jungdae; Oh, Min-Wook; Hwang, Cheol Seong; Jeong, Se-Young

    2014-08-29

    Copper (Cu) thin films have been widely used as electrodes and interconnection wires in integrated electronic circuits, and more recently as substrates for the synthesis of graphene. However, the ultra-high vacuum processes required for high-quality Cu film fabrication, such as molecular beam epitaxy (MBE), restricts mass production with low cost. In this work, we demonstrated high-quality Cu thin films using a single-crystal Cu target and radio-frequency (RF) sputtering technique; the resulting film quality was comparable to that produced using MBE, even under unfavorable conditions for pure Cu film growth. The Cu thin film was epitaxially grown on an Al2O3 (sapphire) (0001) substrate, and had high crystalline orientation along the (111) direction. Despite the 10(-3) Pa vacuum conditions, the resulting thin film was oxygen free due to the high chemical stability of the sputtered specimen from a single-crystal target; moreover, the deposited film had >5× higher adhesion force than that produced using a polycrystalline target. This fabrication method enabled Cu films to be obtained using a simple, manufacturing-friendly process on a large-area substrate, making our findings relevant for industrial applications.

  16. High-quality poly-dispersed mixtures applied in additive 3D technologies.

    Science.gov (United States)

    Gerasimov, M. D.; Brazhnik, Yu V.; Gorshkov, P. S.; Latyshev, S. S.

    2018-03-01

    The paper describes the new mixer design to obtain high-quality poly-dispersed powders applied in additive 3D technologies. It also considers a new mixing principle of dry powder particles ensuring the distribution of such particles in the total volume, which is close to ideal. The paper presents the mathematical model of mixer operation providing for the quality assessment of the ready mixtures. Besides, it demonstrates experimental results and obtained rational values of mixer process parameters.

  17. Methods for slow axis beam quality improvement of high power broad area diode lasers

    Science.gov (United States)

    An, Haiyan; Xiong, Yihan; Jiang, Ching-Long J.; Schmidt, Berthold; Treusch, Georg

    2014-03-01

    For high brightness direct diode laser systems, it is of fundamental importance to improve the slow axis beam quality of the incorporated laser diodes regardless what beam combining technology is applied. To further advance our products in terms of increased brightness at a high power level, we must optimize the slow axis beam quality despite the far field blooming at high current levels. The later is caused predominantly by the built-in index step in combination with the thermal lens effect. Most of the methods for beam quality improvements reported in publications sacrifice the device efficiency and reliable output power. In order to improve the beam quality as well as maintain the efficiency and reliable output power, we investigated methods of influencing local heat generation to reduce the thermal gradient across the slow axis direction, optimizing the built-in index step and discriminating high order modes. Based on our findings, we have combined different methods in our new device design. Subsequently, the beam parameter product (BPP) of a 10% fill factor bar has improved by approximately 30% at 7 W/emitter without efficiency penalty. This technology has enabled fiber coupled high brightness multi-kilowatt direct diode laser systems. In this paper, we will elaborate on the methods used as well as the results achieved.

  18. Quality assurance system for sitting high risk facilities

    International Nuclear Information System (INIS)

    Rodriguez, Aymee; Peralta, Jose L.; Fernandez, Manuel

    1999-01-01

    The paper shows how we have conceived and designed the quality assurance system for the site selection process of an area for sitting the facility of high risk in correspondence with the approved methodology. The results obtained in the implementation of the system have permitted the satisfactory performance of each one the expected stage, defining the most favorable sectors in order to continue the studies of the repository site for the disposal of low and intermedium. (author)

  19. Responses of Aboriginal and Torres Strait Islander Primary Health-Care Services to Continuous Quality Improvement Initiatives.

    Science.gov (United States)

    Larkins, Sarah; Woods, Cindy E; Matthews, Veronica; Thompson, Sandra C; Schierhout, Gill; Mitropoulos, Maxwell; Patrao, Tania; Panzera, Annette; Bailie, Ross Stewart

    2015-01-01

    Indigenous primary health-care (PHC) services participating in continuous quality improvement (CQI) cycles show varying patterns of performance over time. Understanding this variation is essential to scaling up and sustaining quality improvement initiatives. The aim of this study is to examine trends in quality of care for services participating in the ABCD National Research Partnership and describe patterns of change over time and examine health service characteristics associated with positive and negative trends in quality of care. PHC services providing care for Indigenous people in urban, rural, and remote northern Australia that had completed at least three annual audits of service delivery for at least one aspect of care (n = 73). Longitudinal clinical audit data from use of four clinical audit tools (maternal health, child health, preventive health, Type 2 diabetes) between 2005 and 2013 were analyzed. Health center performance was classified into six patterns of change over time: consistent high improvement (positive), sustained high performance (positive), decline (negative), marked variability (negative), consistent low performance (negative), and no specific increase or decrease (neutral). Backwards stepwise multiple logistic regression analyses were used to examine the associations between health service characteristics and positive or negative trends in quality of care. Trends in quality of care varied widely between health services across the four audit tools. Regression analyses of health service characteristics revealed no consistent statistically significant associations of population size, remoteness, governance model, or accreditation status with positive or negative trends in quality of care. The variable trends in quality of care as reflected by CQI audit tools do not appear to be related to easily measurable health service characteristics. This points to the need for a deeper or more nuanced understanding of factors that moderate the

  20. Relationships between lifestyle patterns and cardio-renal-metabolic parameters in patients with type 2 diabetes mellitus: A cross-sectional study.

    Directory of Open Access Journals (Sweden)

    Takeshi Ogihara

    Full Text Available While individuals tend to show accumulation of certain lifestyle patterns, the effect of such patterns in real daily life on cardio-renal-metabolic parameters remains largely unknown. This study aimed to assess clustering of lifestyle patterns and investigate the relationships between such patterns and cardio-renal-metabolic parameters.The study participants were 726 Japanese type 2 diabetes mellitus (T2DM outpatients free of history of cardiovascular diseases. The relationship between lifestyle patterns and cardio-renal-metabolic parameters was investigated by linear and logistic regression analyses.Factor analysis identified three lifestyle patterns. Subjects characterized by evening type, poor sleep quality and depressive status (type 1 pattern had high levels of HbA1c, alanine aminotransferase and albuminuria. Subjects characterized by high consumption of food, alcohol and cigarettes (type 2 pattern had high levels of γ-glutamyl transpeptidase, triglycerides, HDL-cholesterol, blood pressure, and brachial-ankle pulse wave velocity. Subjects characterized by high physical activity (type 3 pattern had low uric acid and mild elevation of alanine aminotransferase and aspartate aminotransferase. In multivariate regression analysis adjusted by age, gender and BMI, type 1 pattern was associated with higher HbA1c levels, systolic BP and brachial-ankle pulse wave velocity. Type 2 pattern was associated with higher HDL-cholesterol levels, triglycerides, aspartate aminotransferase, ɤ- glutamyl transpeptidase levels, and diastolic BP.The study identified three lifestyle patterns that were associated with distinct cardio-metabolic-renal parameters in T2DM patients.UMIN000010932.

  1. Relationships between lifestyle patterns and cardio-renal-metabolic parameters in patients with type 2 diabetes mellitus: A cross-sectional study.

    Science.gov (United States)

    Ogihara, Takeshi; Mita, Tomoya; Osonoi, Yusuke; Osonoi, Takeshi; Saito, Miyoko; Tamasawa, Atsuko; Nakayama, Shiho; Someya, Yuki; Ishida, Hidenori; Gosho, Masahiko; Kanazawa, Akio; Watada, Hirotaka

    2017-01-01

    While individuals tend to show accumulation of certain lifestyle patterns, the effect of such patterns in real daily life on cardio-renal-metabolic parameters remains largely unknown. This study aimed to assess clustering of lifestyle patterns and investigate the relationships between such patterns and cardio-renal-metabolic parameters. The study participants were 726 Japanese type 2 diabetes mellitus (T2DM) outpatients free of history of cardiovascular diseases. The relationship between lifestyle patterns and cardio-renal-metabolic parameters was investigated by linear and logistic regression analyses. Factor analysis identified three lifestyle patterns. Subjects characterized by evening type, poor sleep quality and depressive status (type 1 pattern) had high levels of HbA1c, alanine aminotransferase and albuminuria. Subjects characterized by high consumption of food, alcohol and cigarettes (type 2 pattern) had high levels of γ-glutamyl transpeptidase, triglycerides, HDL-cholesterol, blood pressure, and brachial-ankle pulse wave velocity. Subjects characterized by high physical activity (type 3 pattern) had low uric acid and mild elevation of alanine aminotransferase and aspartate aminotransferase. In multivariate regression analysis adjusted by age, gender and BMI, type 1 pattern was associated with higher HbA1c levels, systolic BP and brachial-ankle pulse wave velocity. Type 2 pattern was associated with higher HDL-cholesterol levels, triglycerides, aspartate aminotransferase, ɤ- glutamyl transpeptidase levels, and diastolic BP. The study identified three lifestyle patterns that were associated with distinct cardio-metabolic-renal parameters in T2DM patients. UMIN000010932.

  2. Soft X-ray generation via inverse compton scattering between high quality electron beam and high power laser

    International Nuclear Information System (INIS)

    Masakazu Washio; Kazuyuki Sakaue; Yoshimasa Hama; Yoshio Kamiya; Tomoko Gowa; Akihiko Masuda; Aki Murata; Ryo Moriyama; Shigeru Kashiwagi; Junji Urakawa

    2007-01-01

    High quality beam generation project based on High-Tech Research Center Project, which has been approved by Ministry of Education, Culture, Sports, Science and Technology in 1999, has been conducted by advance research institute for science and engineering, Waseda University. In the project, laser photo-cathode RF-gun has been selected for the high quality electron beam source. RF cavities with low dark current, which were made by diamond turning technique, have been successfully manufactured. The low emittance electron beam was realized by choosing the modified laser injection technique. The obtained normalized emmitance was about 3 m.mrad at 100 pC of electron charge. The soft x-ray beam generation with the energy of 370 eV, which is in the energy region of so-called water window, by inverse Compton scattering has been performed by the collision between IR laser and the low emmitance electron beams. (Author)

  3. 'Crazy-Paving' Patterns on High-Resolution CT Scans in Patients with Pulmonary Complications after Hematopoietic Stem Cell Transplantation

    International Nuclear Information System (INIS)

    Marchiori, Edson; Escuissato, Dante L.; Gasparetto, Taisa Davaus; Considera, Daniela Peixoto; Franquet, Tomas

    2009-01-01

    To describe the pulmonary complications following hematopoietic stem cell transplantation (HSCT) that can present with a 'crazy-paving' pattern in high-resolution CT scans. Retrospective review of medical records from 2,537 patients who underwent HSCT. The 'crazy-paving' pattern consists of interlobular and intralobular septal thickening superimposed on an area of ground-glass attenuation on high-resolution CT scans. The CT scans were retrospectively reviewed by two radiologists, who reached final decisions by consensus. We identified 10 cases (2.02%), seven male and three female, with pulmonary complications following HSCT that presented with the 'crazy-paving' pattern. Seven (70%) patients had infectious pneumonia (adenovirus, herpes simplex, influenza virus, cytomegalovirus, respiratory syncytial virus, and toxoplasmosis), and three patients presented with non-infectious complications (idiopathic pneumonia syndrome and acute pulmonary edema). The 'crazy-paving' pattern was bilateral in all cases, with diffuse distribution in nine patients (90%), predominantly in the middle and inferior lung regions in seven patients (70%), and involving the anterior and posterior regions of the lungs in nine patients (90%). The 'crazy-paving' pattern is rare in HSCT recipients with pulmonary complications and is associated with infectious complications more commonly than non-infectious conditions

  4. Large scale, highly conductive and patterned transparent films of silver nanowires on arbitrary substrates and their application in touch screens

    International Nuclear Information System (INIS)

    Madaria, Anuj R; Kumar, Akshay; Zhou Chongwu

    2011-01-01

    The application of silver nanowire films as transparent conductive electrodes has shown promising results recently. In this paper, we demonstrate the application of a simple spray coating technique to obtain large scale, highly uniform and conductive silver nanowire films on arbitrary substrates. We also integrated a polydimethylsiloxane (PDMS)-assisted contact transfer technique with spray coating, which allowed us to obtain large scale high quality patterned films of silver nanowires. The transparency and conductivity of the films was controlled by the volume of the dispersion used in spraying and the substrate area. We note that the optoelectrical property, σ DC /σ Op , for various films fabricated was in the range 75-350, which is extremely high for transparent thin film compared to other candidate alternatives to doped metal oxide film. Using this method, we obtain silver nanowire films on a flexible polyethylene terephthalate (PET) substrate with a transparency of 85% and sheet resistance of 33 Ω/sq, which is comparable to that of tin-doped indium oxide (ITO) on flexible substrates. In-depth analysis of the film shows a high performance using another commonly used figure-of-merit, Φ TE . Also, Ag nanowire film/PET shows good mechanical flexibility and the application of such a conductive silver nanowire film as an electrode in a touch panel has been demonstrated.

  5. Large scale, highly conductive and patterned transparent films of silver nanowires on arbitrary substrates and their application in touch screens.

    Science.gov (United States)

    Madaria, Anuj R; Kumar, Akshay; Zhou, Chongwu

    2011-06-17

    The application of silver nanowire films as transparent conductive electrodes has shown promising results recently. In this paper, we demonstrate the application of a simple spray coating technique to obtain large scale, highly uniform and conductive silver nanowire films on arbitrary substrates. We also integrated a polydimethylsiloxane (PDMS)-assisted contact transfer technique with spray coating, which allowed us to obtain large scale high quality patterned films of silver nanowires. The transparency and conductivity of the films was controlled by the volume of the dispersion used in spraying and the substrate area. We note that the optoelectrical property, σ(DC)/σ(Op), for various films fabricated was in the range 75-350, which is extremely high for transparent thin film compared to other candidate alternatives to doped metal oxide film. Using this method, we obtain silver nanowire films on a flexible polyethylene terephthalate (PET) substrate with a transparency of 85% and sheet resistance of 33 Ω/sq, which is comparable to that of tin-doped indium oxide (ITO) on flexible substrates. In-depth analysis of the film shows a high performance using another commonly used figure-of-merit, Φ(TE). Also, Ag nanowire film/PET shows good mechanical flexibility and the application of such a conductive silver nanowire film as an electrode in a touch panel has been demonstrated.

  6. Inkjet-Printed Biofunctional Thermo-Plasmonic Interfaces for Patterned Neuromodulation.

    Science.gov (United States)

    Kang, Hongki; Lee, Gu-Haeng; Jung, Hyunjun; Lee, Jee Woong; Nam, Yoonkey

    2018-02-27

    Localized heat generation by the thermo-plasmonic effect of metal nanoparticles has great potential in biomedical engineering research. Precise patterning of the nanoparticles using inkjet printing can enable the application of the thermo-plasmonic effect in a well-controlled way (shape and intensity). However, a universally applicable inkjet printing process that allows good control in patterning and assembly of nanoparticles with good biocompatibility is missing. Here we developed inkjet-printing-based biofunctional thermo-plasmonic interfaces that can modulate biological activities. We found that inkjet printing of plasmonic nanoparticles on a polyelectrolyte layer-by-layer substrate coating enables high-quality, biocompatible thermo-plasmonic interfaces across various substrates (rigid/flexible, hydrophobic/hydrophilic) by induced contact line pinning and electrostatically assisted nanoparticle assembly. We experimentally confirmed that the generated heat from the inkjet-printed thermo-plasmonic patterns can be applied in micrometer resolution over a large area. Lastly, we demonstrated that the patterned thermo-plasmonic effect from the inkjet-printed gold nanorods can selectively modulate neuronal network activities. This inkjet printing process therefore can be a universal method for biofunctional thermo-plasmonic interfaces in various bioengineering applications.

  7. Time-Efficient High-Resolution Large-Area Nano-Patterning of Silicon Dioxide

    DEFF Research Database (Denmark)

    Lin, Li; Ou, Yiyu; Aagesen, Martin

    2017-01-01

    A nano-patterning approach on silicon dioxide (SiO2) material, which could be used for the selective growth of III-V nanowires in photovoltaic applications, is demonstrated. In this process, a silicon (Si) stamp with nanopillar structures was first fabricated using electron-beam lithography (EBL....... In addition, high time efficiency can be realized by one-spot electron-beam exposure in the EBL process combined with NIL for mass production. Furthermore, the one-spot exposure enables the scalability of the nanostructures for different application requirements by tuning only the exposure dose. The size...

  8. HPLC fingerprint analysis combined with chemometrics for pattern recognition of ginger.

    Science.gov (United States)

    Feng, Xu; Kong, Weijun; Wei, Jianhe; Ou-Yang, Zhen; Yang, Meihua

    2014-03-01

    Ginger, the fresh rhizome of Zingiber officinale Rosc. (Zingiberaceae), has been used worldwide; however, for a long time, there has been no standard approbated internationally for its quality control. To establish an efficacious and combinational method and pattern recognition technique for quality control of ginger. A simple, accurate and reliable method based on high-performance liquid chromatography with photodiode array (HPLC-PDA) detection was developed for establishing the chemical fingerprints of 10 batches of ginger from different markets in China. The method was validated in terms of precision, reproducibility and stability; and the relative standard deviations were all less than 1.57%. On the basis of this method, the fingerprints of 10 batches of ginger samples were obtained, which showed 16 common peaks. Coupled with similarity evaluation software, the similarities between each fingerprint of the sample and the simulative mean chromatogram were in the range of 0.998-1.000. Then, the chemometric techniques, including similarity analysis, hierarchical clustering analysis and principal component analysis were applied to classify the ginger samples. Consistent results were obtained to show that ginger samples could be successfully classified into two groups. This study revealed that HPLC-PDA method was simple, sensitive and reliable for fingerprint analysis, and moreover, for pattern recognition and quality control of ginger.

  9. A pattern framework for software quality assessment and tradeoff analysis

    NARCIS (Netherlands)

    Folmer, Eelke; Boscht, Jan

    The earliest design decisions often have a significant impact on software quality and are the most costly to revoke. One of the challenges in architecture design is to reduce the frequency of retrofit problems in software designs; not being able to improve the quality of a system cost effectively, a

  10. Low-loss high-confinement waveguides and microring resonators in AlGaAs-on-insulator

    DEFF Research Database (Denmark)

    Ottaviano, Luisa; Pu, Minhao; Semenova, Elizaveta

    2016-01-01

    AlGaAs is a promising material for integrated nonlinearphotonics due to its intrinsic high nonlinearity. However,the challenging fabrication of deep etched AlGaAs devices makes it difficult to realize high-performance devices such as low-loss dispersion engineered waveguides and high quality...... microring resonators. Here, we report a process tomake high-quality AlGaAs-on-insulator (AlGaAsOI) waferswhere high confinement waveguides can be realized. Using optimized patterning processes, we fabricated AlGaAsOI waveguides with propagation losses as low as 1 dB/cmand microring resonators with quality...

  11. Comparison of Spontaneously Elicited Language Patterns in Specific Language Impairment and High-Functioning Autism.

    Science.gov (United States)

    Craig, Megan; Trauner, Doris

    2018-02-01

    We aimed to characterize differences in the use of language in children with specific language impairment and high-functioning autism by analyzing verbal responses on standardized tests. The overall goal was to provide clinicians with additional tools with which to aid in distinguishing the two neurodevelopmental disorders. This study included 16 children with specific language impairment, 28 children with high-functioning autism, and 52 typically developing participants between the ages of six and 14. Groups were matched for age, and specific language impairment and high-functioning autism groups were matched on verbal and performance IQ. Responses from standardized tests were examined for response length, grammatical errors, filler words, perseverations, revisions (repeated attempts to begin or continue a sentence), off-topic attention shifts (lapses in attention to the task), and rambling. Data were analyzed using parametric and nonparametric methods. Specific language impairment responses were longer and contained more filler words than did those of the other two groups, whereas high-functioning autism responses exhibited more grammatical errors, off-topic attention shifts, and rambling. Specific language impairment and high-functioning autism responses showed higher rates of perseveration compared with controls. There were no significant differences in revisions among the three groups. Differences in language patterns of participants with specific language impairment and high-functioning autism may be useful to the clinician in helping to differentiate isolated language impairment from high-functioning autism. The results also support the conclusion that the two conditions are separable, and each exhibits a different pattern of language dysfunction. Copyright © 2017 Elsevier Inc. All rights reserved.

  12. Effects of Modeling and Tempo Patterns as Practice Techniques on the Performance of High School Instrumentalists.

    Science.gov (United States)

    Henley, Paul T.

    2001-01-01

    Examines the effect of modeling conditions and tempo patterns on high school instrumentalists' performance. Focuses on high school students (n=60) who play wind instruments. Reports that the with-model condition was superior in rhythm and tempo percentage gain when compared to the no-model condition. Includes references. (CMK)

  13. Silicon/copper dome-patterned electrodes for high-performance hybrid supercapacitors

    Science.gov (United States)

    Liu, Xuyan; Jung, Hun-Gi; Kim, Sang-Ok; Choi, Ho-Suk; Lee, Sangwha; Moon, Jun Hyuk; Lee, Joong Kee

    2013-12-01

    This study proposes a method for manufacturing high-performance electrode materials in which controlling the shape of the current collector and electrode material for a Li-ion capacitor (LIC). In particular, the proposed LIC manufacturing method maintains the high voltage of a cell by using a microdome-patterned electrode material, allowing for reversible reactions between the Li-ion and the active material for an extended period of time. As a result, the LICs exhibit initial capacities of approximately 42 F g-1, even at 60 A g-1. The LICs also exhibit good cycle performance up to approximately 15,000 cycles. In addition, these advancements allow for a considerably higher energy density than other existing capacitor systems. The energy density of the proposed LICs is approximately nine, two, and 1.5 times higher than those of the electrochemical double layer capacitor (EDLC), AC/LiMn2O4 hybrid capacitor, and intrinsic Si/AC LIC, respectively.

  14. Wet treatment of low-quality coal; Tratamiento de Carbones de Baja Calidad

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-12-31

    This project was aimed at the theoretical investigation of the wet oxidation destruction process of low-quality coal under occurrence of oxygen, which could permit the use of slack with a high ratio of inert materials with the above-mentioned technology. This first stage of the project is posed as the theoretical stage in which the proposed patterns are examined and then the pattern which is considered the most profitable one of all the patterns examined up to now is selected. Then the computer simulation was carried out using the process simulator ASPEN PLUS which is used in order to simulate all the stages of the life-cycle of a treatment plant. Afterwards the kinetic equation for the oxidation process of low-quality coal was examined. It can be deduced from the theoretical studies carried out that the technology of wet oxidation can be applied to the treatment of slacks. At a second stage of the project this technology will be examined at an experimental level. (Author)

  15. Quality assurance requirements and methods for high level waste package acceptability

    International Nuclear Information System (INIS)

    1992-12-01

    This document should serve as guidance for assigning the necessary items to control the conditioning process in such a way that waste packages are produced in compliance with the waste acceptance requirements. It is also provided to promote the exchange of information on quality assurance requirements and on the application of quality assurance methods associated with the production of high level waste packages, to ensure that these waste packages comply with the requirements for transportation, interim storage and waste disposal in deep geological formations. The document is intended to assist both the operators of conditioning facilities and repositories as well as national authorities and regulatory bodies, involved in the licensing of the conditioning of high level radioactive wastes or in the development of deep underground disposal systems. The document recommends the quality assurance requirements and methods which are necessary to generate data for these parameters identified in IAEA-TECDOC-560 on qualitative acceptance criteria, and indicates where and when the control methods can be applied, e.g. in the operation or commissioning of a process or in the development of a waste package design. Emphasis is on the control of the process and little reliance is placed on non-destructive or destructive testing. Qualitative criteria, relevant to disposal of high level waste, are repository dependent and are not addressed here. 37 refs, 3 figs, 2 tabs

  16. Synthesis and spectroscopic study of high quality alloy Cdx S ...

    Indian Academy of Sciences (India)

    Wintec

    In the present study, we report the synthesis of high quality CdxZn1–xS nanocrystals alloy at. 150°C with .... (XRD) using a Siemens model D 500, powder X-ray ... decays were analysed using IBH DAS6 software. 3. ... This alloying process is.

  17. Complexity in action: Untangling latent relationships between land quality, economic structures and socio-spatial patterns in Italy.

    Directory of Open Access Journals (Sweden)

    Luca Salvati

    Full Text Available Land quality, a key economic capital supporting local development, is affected by biophysical and anthropogenic factors. Taken as a relevant attribute of economic systems, land quality has shaped the territorial organization of any given region influencing localization of agriculture, industry and settlements. In regions with long-established human-landscape interactions, such as the Mediterranean basin, land quality has determined social disparities and polarization in the use of land, reflecting the action of geographical gradients based on elevation and population density. The present study investigates latent relationships within a large set of indicators profiling local communities and land quality on a fine-grained resolution scale in Italy with the aim to assess the potential impact of land quality on the regional socioeconomic structure. The importance of land quality gradients in the socioeconomic configuration of urban and rural regions was verified analyzing the distribution of 149 socioeconomic and environmental indicators organized in 5 themes and 17 research dimensions. Agriculture, income, education and labour market variables discriminate areas with high land quality from areas with low land quality. While differential land quality in peri-urban areas may reflect conflicts between competing actors, moderate (or low quality of land in rural districts is associated with depopulation, land abandonment, subsidence agriculture, unemployment and low educational levels. We conclude that the socioeconomic profile of local communities has been influenced by land quality in a different way along urban-rural gradients. Policies integrating environmental and socioeconomic measures are required to consider land quality as a pivotal target for sustainable development. Regional planning will benefit from an in-depth understanding of place-specific relationships between local communities and the environment.

  18. Complexity in action: Untangling latent relationships between land quality, economic structures and socio-spatial patterns in Italy.

    Science.gov (United States)

    Salvati, Luca; Tombolini, Ilaria; Gemmiti, Roberta; Carlucci, Margherita; Bajocco, Sofia; Perini, Luigi; Ferrara, Agostino; Colantoni, Andrea

    2017-01-01

    Land quality, a key economic capital supporting local development, is affected by biophysical and anthropogenic factors. Taken as a relevant attribute of economic systems, land quality has shaped the territorial organization of any given region influencing localization of agriculture, industry and settlements. In regions with long-established human-landscape interactions, such as the Mediterranean basin, land quality has determined social disparities and polarization in the use of land, reflecting the action of geographical gradients based on elevation and population density. The present study investigates latent relationships within a large set of indicators profiling local communities and land quality on a fine-grained resolution scale in Italy with the aim to assess the potential impact of land quality on the regional socioeconomic structure. The importance of land quality gradients in the socioeconomic configuration of urban and rural regions was verified analyzing the distribution of 149 socioeconomic and environmental indicators organized in 5 themes and 17 research dimensions. Agriculture, income, education and labour market variables discriminate areas with high land quality from areas with low land quality. While differential land quality in peri-urban areas may reflect conflicts between competing actors, moderate (or low) quality of land in rural districts is associated with depopulation, land abandonment, subsidence agriculture, unemployment and low educational levels. We conclude that the socioeconomic profile of local communities has been influenced by land quality in a different way along urban-rural gradients. Policies integrating environmental and socioeconomic measures are required to consider land quality as a pivotal target for sustainable development. Regional planning will benefit from an in-depth understanding of place-specific relationships between local communities and the environment.

  19. Fast pattern recognition with the ATLAS L1 track trigger for the HL-LHC

    CERN Document Server

    Martensson, Mikael; The ATLAS collaboration

    2016-01-01

    A fast hardware based track trigger for high luminosity upgrade of the Large Hadron Collider (HL- LHC) is being developed in ATLAS. The goal is to achieve trigger levels in high pileup collisions that are similar or even better than those achieved at low pile-up running of LHC by adding tracking information to the ATLAS hardware trigger which is currently based on information from calorimeters and muon trigger chambers only. Two methods for fast pattern recognition are investigated. The first is based on matching tracker hits to pattern banks of simulated high momentum tracks which are stored in a custom made Associative Memory (AM) ASIC. The second is based on the Hough transform where detector hits are transformed into 2D Hough space with one variable related to track pt and one to track direction. Hits found by pattern recognition will be sent to a track fitting step which calculates the track parameters . The speed and precision of the track fitting depends on the quality of the hits selected by the patte...

  20. Formation of a high quality electron beam using photo cathode RF electron gun

    International Nuclear Information System (INIS)

    Washio, Masakazu

    2000-01-01

    Formation of a high quality electron beam using photo cathode RF electron gun is expected for formation of a next generation high brilliant X-ray beam and a source for electron and positron collider. And, on a field of material science, as is possible to carry out an experiment under ultra short pulse and extremely high precision in time, it collects large expectation. Recently, formation of high quality beam possible to develop for multi directions and to use by everyone in future has been able to realize. Here were explained on electron beam source, principle and component on RF electron gun, working features on RF gun, features and simulation of RF gun under operation, and some views in near future. (G.K.)