Controllable Ag nanostructure patterning in a microfluidic channel for real-time SERS systems.

Science.gov (United States)

Leem, Juyoung; Kang, Hyun Wook; Ko, Seung Hwan; Sung, Hyung Jin

2014-03-07

We present a microfluidic patterning system for fabricating nanostructured Ag thin films via a polyol method. The fabricated Ag thin films can be used immediately in a real-time SERS sensing system. The Ag thin films are formed on the inner surfaces of a microfluidic channel so that a Ag-patterned Si wafer and a Ag-patterned PDMS channel are produced by the fabrication. The optimum sensing region and fabrication duration for effective SERS detection were determined. As SERS active substrates, the patterned Ag thin films exhibit an enhancement factor (EF) of 4.25 × 10(10). The Ag-patterned polymer channel was attached to a glass substrate and used as a microfluidic sensing system for the real-time monitoring of biomolecule concentrations. This microfluidic patterning system provides a low-cost process for the fabrication of materials that are useful in medical and pharmaceutical detection and can be employed in mass production.

Bifurcations and Patterns in Nonlinear Dissipative Systems

Energy Technology Data Exchange (ETDEWEB)

Guenter Ahlers

2005-05-27

This project consists of experimental investigations of heat transport, pattern formation, and bifurcation phenomena in non-linear non-equilibrium fluid-mechanical systems. These issues are studies in Rayleigh-B\\'enard convection, using both pure and multicomponent fluids. They are of fundamental scientific interest, but also play an important role in engineering, materials science, ecology, meteorology, geophysics, and astrophysics. For instance, various forms of convection are important in such diverse phenomena as crystal growth from a melt with or without impurities, energy production in solar ponds, flow in the earth's mantle and outer core, geo-thermal stratifications, and various oceanographic and atmospheric phenomena. Our work utilizes computer-enhanced shadowgraph imaging of flow patterns, sophisticated digital image analysis, and high-resolution heat transport measurements.

Effects of intrinsic stochasticity on delayed reaction-diffusion patterning systems

KAUST Repository

Woolley, Thomas E.; Baker, Ruth E.; Gaffney, Eamonn A.; Maini, Philip K.; Seirin-Lee, Sungrim

2012-01-01

Cellular gene expression is a complex process involving many steps, including the transcription of DNA and translation of mRNA; hence the synthesis of proteins requires a considerable amount of time, from ten minutes to several hours. Since diffusion-driven instability has been observed to be sensitive to perturbations in kinetic delays, the application of Turing patterning mechanisms to the problem of producing spatially heterogeneous differential gene expression has been questioned. In deterministic systems a small delay in the reactions can cause a large increase in the time it takes a system to pattern. Recently, it has been observed that in undelayed systems intrinsic stochasticity can cause pattern initiation to occur earlier than in the analogous deterministic simulations. Here we are interested in adding both stochasticity and delays to Turing systems in order to assess whether stochasticity can reduce the patterning time scale in delayed Turing systems. As analytical insights to this problem are difficult to attain and often limited in their use, we focus on stochastically simulating delayed systems. We consider four different Turing systems and two different forms of delay. Our results are mixed and lead to the conclusion that, although the sensitivity to delays in the Turing mechanism is not completely removed by the addition of intrinsic noise, the effects of the delays are clearly ameliorated in certain specific cases. © 2012 American Physical Society.

Effects of intrinsic stochasticity on delayed reaction-diffusion patterning systems

KAUST Repository

Woolley, Thomas E.

2012-05-22

Cellular gene expression is a complex process involving many steps, including the transcription of DNA and translation of mRNA; hence the synthesis of proteins requires a considerable amount of time, from ten minutes to several hours. Since diffusion-driven instability has been observed to be sensitive to perturbations in kinetic delays, the application of Turing patterning mechanisms to the problem of producing spatially heterogeneous differential gene expression has been questioned. In deterministic systems a small delay in the reactions can cause a large increase in the time it takes a system to pattern. Recently, it has been observed that in undelayed systems intrinsic stochasticity can cause pattern initiation to occur earlier than in the analogous deterministic simulations. Here we are interested in adding both stochasticity and delays to Turing systems in order to assess whether stochasticity can reduce the patterning time scale in delayed Turing systems. As analytical insights to this problem are difficult to attain and often limited in their use, we focus on stochastically simulating delayed systems. We consider four different Turing systems and two different forms of delay. Our results are mixed and lead to the conclusion that, although the sensitivity to delays in the Turing mechanism is not completely removed by the addition of intrinsic noise, the effects of the delays are clearly ameliorated in certain specific cases. © 2012 American Physical Society.

All-fiber maskless lithographic technology to form microcircular interference pattern on Azo polymer film

Science.gov (United States)

Kim, Junki; Jung, Yongmin; Oh, Kyunghwan; Chun, Chaemin; Hong, Jeachul; Kim, Dongyu

2005-03-01

We report a novel all-fiber, maskless lithograpic technology to form various concentric grating patterns for micro zone plate on azo polymer film. The proposed technology is based on the interference pattern out of the cleaved end of a coreless silica fiber (CSF)-single mode fiber (SMF) composite. The light guided along SMF expands into the CSF segment to generate various circular interference patterns depending on the length of CSF. Interference patterns are experimentally observed when the CSF length is over a certain length and the finer spacing between the concentric rings are obtained for a longer CSF. By using beam propagation method (BPM) package, we could further investigated the concentric interference patterns in terms of intensity distribution and fringe spacing as a function of CSF length. These intereference patterns are directly projected over azo polymer film and their intensity distrubution formed surface relief grating (SRG) patterns. Compared to photoresist films azo polymer layers produce surface relief grating (SRG), where the actual mass of layer is modulated rather than refractive index. The geometric parameters of the CSF length as well as diameter and the spacing between the cleaved end of a CSF and azo polymer film, were found to play a major role to generate various concentric structures. With the demonstration of the circular SRG patterns, we confirmed that the proposed technique do have an ample potential to fabricate micro fresnel zone plate, that could find applications in lens arrays for optical beam formings as well as compact photonic devices.

Fluid pipeline system leak detection based on neural network and pattern recognition

International Nuclear Information System (INIS)

Tang Xiujia

1998-01-01

The mechanism of the stress wave propagation along the pipeline system of NPP, caused by turbulent ejection from pipeline leakage, is researched. A series of characteristic index are described in time domain or frequency domain, and compress numerical algorithm is developed for original data compression. A back propagation neural networks (BPNN) with the input matrix composed by stress wave characteristics in time domain or frequency domain is first proposed to classify various situations of the pipeline, in order to detect the leakage in the fluid flow pipelines. The capability of the new method had been demonstrated by experiments and finally used to design a handy instrument for the pipeline leakage detection. Usually a pipeline system has many inner branches and often in adjusting dynamic condition, it is difficult for traditional pipeline diagnosis facilities to identify the difference between inner pipeline operation and pipeline fault. The author first proposed pipeline wave propagation identification by pattern recognition to diagnose pipeline leak. A series of pattern primitives such as peaks, valleys, horizon lines, capstan peaks, dominant relations, slave relations, etc., are used to extract features of the negative pressure wave form. The context-free grammar of symbolic representation of the negative wave form is used, and a negative wave form parsing system with application to structural pattern recognition based on the representation is first proposed to detect and localize leaks of the fluid pipelines

Supra-galactic colour patterns in globular cluster systems

Science.gov (United States)

Forte, Juan C.

2017-07-01

An analysis of globular cluster systems associated with galaxies included in the Virgo and Fornax Hubble Space Telescope-Advanced Camera Surveys reveals distinct (g - z) colour modulation patterns. These features appear on composite samples of globular clusters and, most evidently, in galaxies with absolute magnitudes Mg in the range from -20.2 to -19.2. These colour modulations are also detectable on some samples of globular clusters in the central galaxies NGC 1399 and NGC 4486 (and confirmed on data sets obtained with different instruments and photometric systems), as well as in other bright galaxies in these clusters. After discarding field contamination, photometric errors and statistical effects, we conclude that these supra-galactic colour patterns are real and reflect some previously unknown characteristic. These features suggest that the globular cluster formation process was not entirely stochastic but included a fraction of clusters that formed in a rather synchronized fashion over large spatial scales, and in a tentative time lapse of about 1.5 Gy at redshifts z between 2 and 4. We speculate that the putative mechanism leading to that synchronism may be associated with large scale feedback effects connected with violent star-forming events and/or with supermassive black holes.

Tomography patterns of lung disease in systemic sclerosis

Energy Technology Data Exchange (ETDEWEB)

Bastos, Andrea de Lima; Correa, Ricardo de Amorim; Ferreira, Gilda Aparecida, E-mail: andrealb@ufmg.br [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). Faculdade de Medicina

2016-09-15

Currently, lung impairment is the leading factor responsible for the morbidity and mortality associated with systemic sclerosis. Therefore, the recognition of the various tomography patterns becomes decisive in the clinical management of these patients. In high-resolution computed tomography studies, the most common pattern is that of nonspecific interstitial pneumonia. However, there are other forms of lung involvement that must also be recognized. The aim of this study was to review the literature on the main changes resulting from pulmonary involvement in systemic sclerosis and the corresponding radiological findings, considering the current classification of interstitial diseases. We searched the Medline (PubMed), Lilacs, and SciELO databases in order to select articles related to pulmonary changes in systemic sclerosis and published in English between 2000 and 2015. The pulmonary changes seen on computed tomography in systemic sclerosis are varied and are divided into three main categories: interstitial, alveolar, and vascular. Interstitial changes constitute the most common type of pulmonary involvement in systemic sclerosis. However, alveolar and vascular manifestations must also be recognized and considered in the presence of atypical clinical presentations and inadequate treatment responses. (author)

Tomography patterns of lung disease in systemic sclerosis

Directory of Open Access Journals (Sweden)

Andréa de Lima Bastos

Full Text Available Abstract Currently, lung impairment is the leading factor responsible for the morbidity and mortality associated with systemic sclerosis. Therefore, the recognition of the various tomography patterns becomes decisive in the clinical management of these patients. In high-resolution computed tomography studies, the most common pattern is that of nonspecific interstitial pneumonia. However, there are other forms of lung involvement that must also be recognized. The aim of this study was to review the literature on the main changes resulting from pulmonary involvement in systemic sclerosis and the corresponding radiological findings, considering the current classification of interstitial diseases. We searched the Medline (PubMed, Lilacs, and SciELO databases in order to select articles related to pulmonary changes in systemic sclerosis and published in English between 2000 and 2015. The pulmonary changes seen on computed tomography in systemic sclerosis are varied and are divided into three main categories: interstitial, alveolar, and vascular. Interstitial changes constitute the most common type of pulmonary involvement in systemic sclerosis. However, alveolar and vascular manifestations must also be recognized and considered in the presence of atypical clinical presentations and inadequate treatment responses.

Tomography patterns of lung disease in systemic sclerosis

International Nuclear Information System (INIS)

Bastos, Andrea de Lima; Correa, Ricardo de Amorim; Ferreira, Gilda Aparecida

2016-01-01

Currently, lung impairment is the leading factor responsible for the morbidity and mortality associated with systemic sclerosis. Therefore, the recognition of the various tomography patterns becomes decisive in the clinical management of these patients. In high-resolution computed tomography studies, the most common pattern is that of nonspecific interstitial pneumonia. However, there are other forms of lung involvement that must also be recognized. The aim of this study was to review the literature on the main changes resulting from pulmonary involvement in systemic sclerosis and the corresponding radiological findings, considering the current classification of interstitial diseases. We searched the Medline (PubMed), Lilacs, and SciELO databases in order to select articles related to pulmonary changes in systemic sclerosis and published in English between 2000 and 2015. The pulmonary changes seen on computed tomography in systemic sclerosis are varied and are divided into three main categories: interstitial, alveolar, and vascular. Interstitial changes constitute the most common type of pulmonary involvement in systemic sclerosis. However, alveolar and vascular manifestations must also be recognized and considered in the presence of atypical clinical presentations and inadequate treatment responses. (author)

Advances in metal forming expert system for metal forming

CERN Document Server

Hingole, Rahulkumar Shivajirao

2015-01-01

This comprehensive book offers a clear account of the theory and applications of advanced metal forming. It provides a detailed discussion of specific forming processes, such as deep drawing, rolling, bending extrusion and stamping. The author highlights recent developments of metal forming technologies and explains sound, new and powerful expert system techniques for solving advanced engineering problems in metal forming. In addition, the basics of expert systems, their importance and applications to metal forming processes, computer-aided analysis of metalworking processes, formability analysis, mathematical modeling and case studies of individual processes are presented.

Wittgenstein on Forms of Life, Patterns of Life, and Ways of Living

Directory of Open Access Journals (Sweden)

Daniele Moyal-Sharrock

2015-10-01

Full Text Available This paper aims to distinguish Wittgenstein’s concept of ‘form of life’ from other concepts or expressions that have been confused or conflated with it, such as ‘language-game’, ‘certainty’, ‘patterns of life’, ‘ways of living’ and ‘facts of living’. Competing interpretations of Wittgenstein’s ‘form(s of life’ are reviewed (Baker & Hacker, Cavell, Conway, Garver, and it is concluded that Wittgenstein intended both a singular and a plural use of the concept; with, where the human is concerned, a single human form of life characterized by innumerable forms of human life.

Optimization of control bars patterns and fuel recharges of coupled form

International Nuclear Information System (INIS)

Mejia S, D.M.; Ortiz S, J.J.

2006-01-01

In this work a system coupled for the optimization of fuel recharges and control bars patterns in boiling water reactors (BWR by its initials in English) is presented. It was used a multi state recurrent neural net like optimization technique. This type of neural net has been used in the solution of diverse problems, in particular the design of patterns of control bars and the design of the fuel recharge. However, these problems have been resolved in an independent way with different optimization techniques. The system was developed in FORTRAN 77 language, it calls OCORN (Optimization of Cycles of Operation using Neural Nets) and it solves both problems of combinatory optimization in a coupled way. OCORN begins creating a seed recharge by means of an optimization through the Haling principle. Later on a pattern of control bars for this recharge seed is proposed. Then a new fuel recharge is designed using the control bars patterns previously found. By this way an iterative process begins among the optimization of control bars patterns and the fuel recharge until a stop criteria it is completed. The stop criteria is completed when the fuel recharges and the control bars patterns don't vary in several successive iterations. The final result is an optimal fuel recharge and its respective control bars pattern. In this work the obtained results by this system for a cycle of balance of 18 months divided in 12 steps of burnt are presented. The obtained results are very encouraging, since the fuel recharge and the control bars pattern, its fulfill with the restrictions imposed in each one of the problems. (Author)

Pattern graph rewrite systems

Directory of Open Access Journals (Sweden)

Aleks Kissinger

2014-03-01

Full Text Available String diagrams are a powerful tool for reasoning about physical processes, logic circuits, tensor networks, and many other compositional structures. Dixon, Duncan and Kissinger introduced string graphs, which are a combinatoric representations of string diagrams, amenable to automated reasoning about diagrammatic theories via graph rewrite systems. In this extended abstract, we show how the power of such rewrite systems can be greatly extended by introducing pattern graphs, which provide a means of expressing infinite families of rewrite rules where certain marked subgraphs, called !-boxes ("bang boxes", on both sides of a rule can be copied any number of times or removed. After reviewing the string graph formalism, we show how string graphs can be extended to pattern graphs and how pattern graphs and pattern rewrite rules can be instantiated to concrete string graphs and rewrite rules. We then provide examples demonstrating the expressive power of pattern graphs and how they can be applied to study interacting algebraic structures that are central to categorical quantum mechanics.

On the physical basis of pattern formation in nonlinear systems

International Nuclear Information System (INIS)

Sanduloviciu, M.; Lozneanu, E.; Popescu, S.

2003-01-01

Spatial, respectively spatiotemporal patterns appear in a gaseous conductor (plasma) when an external constraint produces a local gradient of electron kinetic energy. Under such conditions, collective quantum effects related to the spatial separation of the excitation and ionization cross-sections determine the appearance of adjacent opposite space charges. The state of the resulting space charge configuration depends on the self-enhancement process of positive ions production, which destabilizes the system. Thus, a spatial pattern in the form of a stable double layer appears after self-organization when the above gradient is smaller than that for which the double layer transits into a moving phase (spatiotemporal pattern). The proposed explanation, based on investigations performed on self-organization phenomena observed in gaseous conductors, suggests a new possibility to clarify the challenging problems concerning the actual physical basis of pattern formation in semiconductors

Ink-Jet Printer Forms Solar-Cell Contacts

Science.gov (United States)

Alexander, Paul, Jr.; Vest, R. W.; Binford, Don A.; Tweedell, Eric P.

1988-01-01

Contacts formed in controllable patterns with metal-based inks. System forms upper metal contact patterns on silicon photovoltaic cells. Uses metallo-organic ink, decomposes when heated, leaving behind metallic, electrically conductive residue in printed area.

Development of Fractal Pattern Making Application using L-System for Enhanced Machine Controller

Directory of Open Access Journals (Sweden)

Gunawan Alexander A S

2014-03-01

Full Text Available One big issue facing the industry today is an automated machine lack of flexibility for customization because it is designed by the manufacturers based on certain standards. In this research, it is developed customized application software for CNC (Computer Numerically Controlled machines using open source platform. The application is enable us to create designs by means of fractal patterns using L-System, developed by turtle geometry interpretation and Python programming languages. The result of the application is the G-Code of fractal pattern formed by the method of L-System. In the experiment on the CNC machine, the G-Code of fractal pattern which involving the branching structure has been able to run well.

Single camera analyses in studying pattern forming dynamics of player interactions in team sports.

OpenAIRE

Duarte, Ricardo; Fernandes, Orlando; Folgado, Hugo; Araújo, Duarte

2013-01-01

A network of patterned interactions between players characterises team ball sports. Thus, interpersonal coordination patterns are an important topic in the study of performance in such sports. A very useful method has been the study of inter-individual interactions captured by a single camera filming an extended performance area. The appropriate collection of positional data allows investigating the pattern forming dynamics emerging in different performance sub-phases of team ball sports. Thi...

Programmable assembly of pressure sensors using pattern-forming bacteria.

Science.gov (United States)

Cao, Yangxiaolu; Feng, Yaying; Ryser, Marc D; Zhu, Kui; Herschlag, Gregory; Cao, Changyong; Marusak, Katherine; Zauscher, Stefan; You, Lingchong

2017-11-01

Biological systems can generate microstructured materials that combine organic and inorganic components and possess diverse physical and chemical properties. However, these natural processes in materials fabrication are not readily programmable. Here, we use a synthetic-biology approach to assemble patterned materials. We demonstrate programmable fabrication of three-dimensional (3D) materials by printing engineered self-patterning bacteria on permeable membranes that serve as a structural scaffold. Application of gold nanoparticles to the colonies creates hybrid organic-inorganic dome structures. The dynamics of the dome structures' response to pressure is determined by their geometry (colony size, dome height, and pattern), which is easily modified by varying the properties of the membrane (e.g., pore size and hydrophobicity). We generate resettable pressure sensors that process signals in response to varying pressure intensity and duration.

Pattern-Oriented Reengineering of a Network System

Directory of Open Access Journals (Sweden)

Chung-Horng Lung

2004-08-01

Full Text Available Reengineering is to reorganize and modify existing systems to enhance them or to make them more maintainable. Reengineering is usually necessary as systems evolve due to changes in requirements, technologies, and/or personnel. Design patterns capture recurring structures and dynamics among software participants to facilitate reuse of successful designs. Design patterns are common and well studied in network systems. In this project, we reengineer part of a network system with some design patterns to support future evolution and performance improvement. We start with reverse engineering effort to understand the system and recover its high level architecture. Then we apply concurrent and networked design patterns to restructure the main sub-system. Those patterns include Half-Sync/Half-Async, Monitor Object, and Scoped Locking idiom. The resulting system is more maintainable and has better performance.

MODELING OF PATTERN FORMING PROCESS OF AUTOMATIC RADIO DIRECTION FINDER OF PHASE VHF IN THE DEVELOPMENT ENVIRONMENT OF LabVIEW APPLIED PROGRAMS

Directory of Open Access Journals (Sweden)

G. K. Aslanov

2015-01-01

Full Text Available In the article is developed the model demonstrating the forming process of pattern of antenna system of aerodrome quasidopler automatic radiodirection-finder station in the development environment of LabVIEW applied programs of National Instrument company. 

Adaptive Forming of the Beam Pattern of Microstrip Antenna with the Use of an Artificial Neural Network

Directory of Open Access Journals (Sweden)

Janusz Dudczyk

2012-01-01

Full Text Available Microstrip antenna has been recently one of the most innovative fields of antenna techniques. The main advantage of such an antenna is the simplicity of its production, little weight, a narrow profile, and easiness of integration of the radiating elements with the net of generators power systems. As a result of using arrays consisting of microstrip antennas; it is possible to decrease the size and weight and also to reduce the costs of components production as well as whole application systems. This paper presents possibilities of using artificial neural networks (ANNs in the process of forming a beam from radiating complex microstrip antenna. Algorithms which base on artificial neural networks use high parallelism of actions which results in considerable acceleration of the process of forming the antenna pattern. The appropriate selection of learning constants makes it possible to get theoretically a solution which will be close to the real time. This paper presents the training neural network algorithm with the selection of optimal network structure. The analysis above was made in case of following the emission source, setting to zero the pattern of direction of expecting interference, and following emission source compared with two constant interferences. Computer simulation was made in MATLAB environment on the basis of Flex Tool, a programme which creates artificial neural networks.

Patterns and Intelligent Systems

International Nuclear Information System (INIS)

Cordes, Gail A.

2003-01-01

The recognition and analysis of evolving patterns provides a unifying concept for studying and implementing intelligent information processing for open feedback control systems within the nuclear industry. Control is considered as influence of a large system to achieve the goals of the human (who might or might not be part of an open feedback loop) and is not limited to operation of a component within a nuclear power plant. The intelligent control system includes open logic and can automatically react to new data in an unprogrammed way. This application of evolving patterns integrates current research developments in human cognition and scientific semiotics with traditional feedback control. A preliminary implementation of such a system using existing computational techniques is postulated, and tools that are lacking at this time are identified. Proof-of-concept applications for the nuclear industry are referenced

Face recognition system and method using face pattern words and face pattern bytes

Science.gov (United States)

Zheng, Yufeng

2014-12-23

The present invention provides a novel system and method for identifying individuals and for face recognition utilizing facial features for face identification. The system and method of the invention comprise creating facial features or face patterns called face pattern words and face pattern bytes for face identification. The invention also provides for pattern recognitions for identification other than face recognition. The invention further provides a means for identifying individuals based on visible and/or thermal images of those individuals by utilizing computer software implemented by instructions on a computer or computer system and a computer readable medium containing instructions on a computer system for face recognition and identification.

Science on form

International Nuclear Information System (INIS)

Ishizaka, Shozo; Kato, Yoshihiro; Takaki, Ryuji; Toriwaki, Jun-ichiro

1987-01-01

The purpose of the Symposium was to discuss interdisciplinal science aspects of form. 'Form' depends on the material and the changes. But, it is the form that appears evident at once and endures. Form is absorbed from every field as media of information. One part of the work covers the description of non-periodic phenomena, morphogenesis or evolution. Irreducible stubborn facts as diseases or social problems, or whatever else that could not be analyzed are integrally challenged to be systematized by computer simulation. The other part covers the finding of laws for determining how systems behave. Attention should be paid to pattern recognition, image processing and pattern formation. The Symposium proceeded with no parallel sessions, and participants from various fields made exciting discussions in an interdisciplinal atmosphere. (Auth.)

Establishment of neurovascular congruency in the mouse whisker system by an independent patterning mechanism.

Science.gov (United States)

Oh, Won-Jong; Gu, Chenghua

2013-10-16

Nerves and vessels often run parallel to one another, a phenomenon that reflects their functional interdependency. Previous studies have suggested that neurovascular congruency in planar tissues such as skin is established through a "one-patterns-the-other" model, in which either the nervous system or the vascular system precedes developmentally and then instructs the other system to form using its established architecture as a template. Here, we find that, in tissues with complex three-dimensional structures such as the mouse whisker system, neurovascular congruency does not follow the previous model but rather is established via a mechanism in which nerves and vessels are patterned independently. Given the diversity of neurovascular structures in different tissues, guidance signals emanating from a central organizer in the specific target tissue may act as an important mechanism to establish neurovascular congruency patterns that facilitate unique target tissue function. Copyright © 2013 Elsevier Inc. All rights reserved.

Computational applications of the thermodynamic local potential: The case of pattern forming systems

International Nuclear Information System (INIS)

Hubert, J.Z.

1986-09-01

Using the thermodynamic local potential Φ a single variational principle may be formulated for a broad class of pattern formation phenomena (this class contains patterns which are: macroscopic, possess steady states, are degenerate at least with respect to one parameter, approach the steady state via fluctuations in the coarsely grained (macroscopic) phase space and so have no memory of the initial conditions). When a steady state is reached Φ assumes its minimum value with respect to distribution function and a maximum with respect to the actually assumed values of free parameters. (author)

Substrate system for spray forming

Energy Technology Data Exchange (ETDEWEB)

Chu, Men G. (Export, PA); Chernicoff, William P. (Harrisburg, PA)

2002-01-01

A substrate system for receiving a deposit of sprayed metal droplets including a movable outer substrate on which the sprayed metal droplets are deposited. The substrate system also includes an inner substrate disposed adjacent the outer substrate where the sprayed metal droplets are deposited on the outer substrate. The inner substrate includes zones of differing thermal conductivity to resist substrate layer porosity and to resist formation of large grains and coarse constituent particles in a bulk layer of the metal droplets which have accumulated on the outer substrate. A spray forming apparatus and associated method of spray forming a molten metal to form a metal product using the substrate system of the invention is also provided.

Elevational plant species richness patterns and their drivers across non-endemics, endemics and growth forms in the Eastern Himalaya.

Science.gov (United States)

Manish, Kumar; Pandit, Maharaj K; Telwala, Yasmeen; Nautiyal, Dinesh C; Koh, Lian Pin; Tiwari, Sudha

2017-09-01

Despite decades of research, ecologists continue to debate how spatial patterns of species richness arise across elevational gradients on the Earth. The equivocal results of these studies could emanate from variations in study design, sampling effort and data analysis. In this study, we demonstrate that the richness patterns of 2,781 (2,197 non-endemic and 584 endemic) angiosperm species along an elevational gradient of 300-5,300 m in the Eastern Himalaya are hump-shaped, spatial scale of extent (the proportion of elevational gradient studied) dependent and growth form specific. Endemics peaked at higher elevations than non-endemics across all growth forms (trees, shrubs, climbers, and herbs). Richness patterns were influenced by the proportional representation of the largest physiognomic group (herbs). We show that with increasing spatial scale of extent, the richness patterns change from a monotonic to a hump-shaped pattern and richness maxima shift toward higher elevations across all growth forms. Our investigations revealed that the combination of ambient energy (air temperature, solar radiation, and potential evapo-transpiration) and water availability (soil water content and precipitation) were the main drivers of elevational plant species richness patterns in the Himalaya. This study highlights the importance of factoring in endemism, growth forms, and spatial scale when investigating elevational gradients of plant species distributions and advances our understanding of how macroecological patterns arise.

Pattern formation, logistics, and maximum path probability

Science.gov (United States)

Kirkaldy, J. S.

1985-05-01

The concept of pattern formation, which to current researchers is a synonym for self-organization, carries the connotation of deductive logic together with the process of spontaneous inference. Defining a pattern as an equivalence relation on a set of thermodynamic objects, we establish that a large class of irreversible pattern-forming systems, evolving along idealized quasisteady paths, approaches the stable steady state as a mapping upon the formal deductive imperatives of a propositional function calculus. In the preamble the classical reversible thermodynamics of composite systems is analyzed as an externally manipulated system of space partitioning and classification based on ideal enclosures and diaphragms. The diaphragms have discrete classification capabilities which are designated in relation to conserved quantities by descriptors such as impervious, diathermal, and adiabatic. Differentiability in the continuum thermodynamic calculus is invoked as equivalent to analyticity and consistency in the underlying class or sentential calculus. The seat of inference, however, rests with the thermodynamicist. In the transition to an irreversible pattern-forming system the defined nature of the composite reservoirs remains, but a given diaphragm is replaced by a pattern-forming system which by its nature is a spontaneously evolving volume partitioner and classifier of invariants. The seat of volition or inference for the classification system is thus transferred from the experimenter or theoretician to the diaphragm, and with it the full deductive facility. The equivalence relations or partitions associated with the emerging patterns may thus be associated with theorems of the natural pattern-forming calculus. The entropy function, together with its derivatives, is the vehicle which relates the logistics of reservoirs and diaphragms to the analog logistics of the continuum. Maximum path probability or second-order differentiability of the entropy in isolation are

Design Patterns Application in the ERP Systems Improvements

Science.gov (United States)

Jovičić, Bojan; Vlajić, Siniša

Design patterns application have long been present in software engineering. The same is true for ERP systems in business software. Is it possible that ERP systems do not have a good maintenance score? We have found out that there is room for maintenance improvement and that it is possible to improve ERP systems using design patterns. We have conducted comparative analysis of ease of maintenance of the ERP systems. The results show that the average score for our questions is 64%, with most answers for ERP systems like SAP, Oracle EBS, Dynamics AX. We found that 59% of ERP system developer users are not familiar with design patterns. Based on this research, we have chosen Dynamics AX as the ERP system for examination of design patterns improvement possibilities. We used software metrics to measure improvement possibility. We found that we could increase the Conditional Complexity score 17-fold by introducing design patterns.

Dissipative neurodynamics in perception forms cortical patterns that are stabilized by vortices

Science.gov (United States)

Freeman, Walter J.; Vitiello, Giuseppe

2009-06-01

In the engagement of the brain with its environment, large-scale neural interactions in brain dynamics create a mesoscopic order parameter, which is evaluated by measuring brain waves (electrocorticogram, ECoG). Such large-scale interactions emerge from the background activity of the brain that is sustained by mutual excitation in cortical populations and manifest in spatiotemporal patterns of neural activity. Band pass filtering reveals beats in ECoG power that recur at theta rates (3-7 Hz) as null spikes in log10 power. The order parameter transiently approaches zero, and the microscopic activity is both disordered and symmetric. As the null spikes terminate, the order parameter resurges and imposes a mesoscopic spatial pattern of ECoG amplitude modulation that then governs the microscopic gamma activity and retrieves the memory of a stimulus. The brain waves reveal a spatial pattern of phase modulation in the form of a cone. The dissipative many-body model of brain dynamics describes these phase cones as vortices, which are initiated by the null spikes, and which stabilize the amplitude modulated patterns embedded in the turbulent neural noise from which they emerge.

Dissipative neurodynamics in perception forms cortical patterns that are stabilized by vortices

International Nuclear Information System (INIS)

Freeman, Walter J; Vitiello, Giuseppe

2009-01-01

In the engagement of the brain with its environment, large-scale neural interactions in brain dynamics create a mesoscopic order parameter, which is evaluated by measuring brain waves (electrocorticogram, ECoG). Such large-scale interactions emerge from the background activity of the brain that is sustained by mutual excitation in cortical populations and manifest in spatiotemporal patterns of neural activity. Band pass filtering reveals beats in ECoG power that recur at theta rates (3-7 Hz) as null spikes in log 10 power. The order parameter transiently approaches zero, and the microscopic activity is both disordered and symmetric. As the null spikes terminate, the order parameter resurges and imposes a mesoscopic spatial pattern of ECoG amplitude modulation that then governs the microscopic gamma activity and retrieves the memory of a stimulus. The brain waves reveal a spatial pattern of phase modulation in the form of a cone. The dissipative many-body model of brain dynamics describes these phase cones as vortices, which are initiated by the null spikes, and which stabilize the amplitude modulated patterns embedded in the turbulent neural noise from which they emerge.

Understanding of the management information system based on MVC pattern

Science.gov (United States)

Chen, Sida

2018-04-01

With the development of the society, people have come to realize the significance of information, not only linguistically but also in the written form. To build an effective and efficient working flow, a new subject called Management Information System (MIS) came up. MIS is an integrated discipline, which utilizes comprehensive and systematical methods to manage information, and it enhances the work efficiency through building structured information platform. This paper demonstrates the Management Information System from shallow too deep with the understanding of MVC pattern, including its basic structure and application with ASP.NET. Also some discussions about its features are made in the last section.

Pattern dynamics of the reaction-diffusion immune system.

Science.gov (United States)

Zheng, Qianqian; Shen, Jianwei; Wang, Zhijie

2018-01-01

In this paper, we will investigate the effect of diffusion, which is ubiquitous in nature, on the immune system using a reaction-diffusion model in order to understand the dynamical behavior of complex patterns and control the dynamics of different patterns. Through control theory and linear stability analysis of local equilibrium, we obtain the optimal condition under which the system loses stability and a Turing pattern occurs. By combining mathematical analysis and numerical simulation, we show the possible patterns and how these patterns evolve. In addition, we establish a bridge between the complex patterns and the biological mechanism using the results from a previous study in Nature Cell Biology. The results in this paper can help us better understand the biological significance of the immune system.

Towards the first generation micro bulk forming system

DEFF Research Database (Denmark)

Arentoft, Mogens; Eriksen, Rasmus Solmer; Hansen, Hans Nørgaard

2011-01-01

. This work describes a number of prototype system units, which collectively form a desktop sized micro forming production system. The system includes a billet preparation module, an integrated transfer system, a temperature controlled forming tool, including process simulation, and a dedicated micro forming......The industrial demand for micro mechanical components has surged in the later years with the constant introduction of more integrated products. The micro bulk forming process holds a promising pledge of delivering high quality micro mechanical components at low cost and high production rates...... press. The system is demonstrated on an advanced micro forming case where a dental component is formed in medical grade Titanium....

Lowland river systems - processes, form and function

DEFF Research Database (Denmark)

Pedersen, M. L.; Kronvang, B.; Sand-Jensen, K.

2006-01-01

Present day river valleys and rivers are not as dynamic and variable as they used to be. We will here describe the development and characteristics of rivers and their valleys and explain the background to the physical changes in river networks and channel forms from spring to the sea. We seek...... to answer two fundamental questions: How has anthropogenic disturbance of rivers changed the fundamental form and physical processes in river valleys? Can we use our understanding of fl uvial patterns to restore the dynamic nature of channelised rivers and drained fl oodplains in river valleys?...

Rethinking pattern formation in reaction-diffusion systems

Science.gov (United States)

Halatek, J.; Frey, E.

2018-05-01

The present theoretical framework for the analysis of pattern formation in complex systems is mostly limited to the vicinity of fixed (global) equilibria. Here we present a new theoretical approach to characterize dynamical states arbitrarily far from (global) equilibrium. We show that reaction-diffusion systems that are driven by locally mass-conserving interactions can be understood in terms of local equilibria of diffusively coupled compartments. Diffusive coupling generically induces lateral redistribution of the globally conserved quantities, and the variable local amounts of these quantities determine the local equilibria in each compartment. We find that, even far from global equilibrium, the system is well characterized by its moving local equilibria. We apply this framework to in vitro Min protein pattern formation, a paradigmatic model for biological pattern formation. Within our framework we can predict and explain transitions between chemical turbulence and order arbitrarily far from global equilibrium. Our results reveal conceptually new principles of self-organized pattern formation that may well govern diverse dynamical systems.

Identification system by eye retinal pattern

International Nuclear Information System (INIS)

Sunagawa, Takahisa; Shibata, Susumu

1987-01-01

Identification system by eye retinal pattern is introduced from the view-point of history of R and D, measurement, apparatus, evaluation tests, safety and application. According to our evaluation tests, enrolling time is approximately less than 1 min, verification time is a few seconds and false accept rate is 0 %. Evaluation tests at Sandia National Laboratories in USA show the comparison data of false accept rates such as 0 % for eye retinal pattern, 10.5 % for finger-print, 5.8 % for signature dynamics and 17.7 % for speaker voice. The identification system by eye retinal pattern has only three applications in Japan, but there has been a number of experience in USA. This fact suggests that the system will become an important means for physical protections not only in nuclear field but also in other industrial fields in Japan. (author)

Triboelectricity: macroscopic charge patterns formed by self-arraying ions on polymer surfaces.

Science.gov (United States)

Burgo, Thiago A L; Ducati, Telma R D; Francisco, Kelly R; Clinckspoor, Karl J; Galembeck, Fernando; Galembeck, Sergio E

2012-05-15

Tribocharged polymers display macroscopically patterned positive and negative domains, verifying the fractal geometry of electrostatic mosaics previously detected by electric probe microscopy. Excess charge on contacting polyethylene (PE) and polytetrafluoroethylene (PTFE) follows the triboelectric series but with one caveat: net charge is the arithmetic sum of patterned positive and negative charges, as opposed to the usual assumption of uniform but opposite signal charging on each surface. Extraction with n-hexane preferentially removes positive charges from PTFE, while 1,1-difluoroethane and ethanol largely remove both positive and negative charges. Using suitable analytical techniques (electron energy-loss spectral imaging, infrared microspectrophotometry and carbonization/colorimetry) and theoretical calculations, the positive species were identified as hydrocarbocations and the negative species were identified as fluorocarbanions. A comprehensive model is presented for PTFE tribocharging with PE: mechanochemical chain homolytic rupture is followed by electron transfer from hydrocarbon free radicals to the more electronegative fluorocarbon radicals. Polymer ions self-assemble according to Flory-Huggins theory, thus forming the experimentally observed macroscopic patterns. These results show that tribocharging can only be understood by considering the complex chemical events triggered by mechanical action, coupled to well-established physicochemical concepts. Patterned polymers can be cut and mounted to make macroscopic electrets and multipoles.

Numerical and Experimental Study on the Formation and Dispersion Patterns of Multiple Explosively Formed Penetrators

Directory of Open Access Journals (Sweden)

Jian Feng Liu

Full Text Available Abstract Three-dimensional numerical simulations and experiments were performed to examine the formation and spatial dispersion patterns of integral multiple explosively formed penetrators (MEFP warhead with seven hemispherical liners. Numerical results had successfully described the formation process and distribution pattern of MEFP. A group of penetrators consisting of a central penetrator surrounded by 6 penetrators is formed during the formation process of MEFP and moves in the direction of aiming position. The maximum divergence angle of the surrounding penetrator group was 7.8°, and the damage area could reach 0.16 m2 at 1.2 m. The laws of perforation dispersion patterns of MEFP were also obtained through a nonlinear fitting of the perforation information on the target at different standoffs. The terminal effects of the MEFP warhead were performed on three #45 steel targets with a dimension of 160cm ( 160cm ( 1.5cm at various standoffs (60, 80, and 120 cm. The simulation results were validated through penetration experiments at different standoffs. It has shown excellent agreement between simulation and experiment results.

Vitality Forms Processing in the Insula during Action Observation: A Multivoxel Pattern Analysis.

Science.gov (United States)

Di Cesare, Giuseppe; Valente, Giancarlo; Di Dio, Cinzia; Ruffaldi, Emanuele; Bergamasco, Massimo; Goebel, Rainer; Rizzolatti, Giacomo

2016-01-01

Observing the style of an action done by others allows the observer to understand the cognitive state of the agent. This information has been defined by Stern "vitality forms". Previous experiments showed that the dorso-central insula is selectively active both during vitality form observation and execution. In the present study, we presented participants with videos showing hand actions performed with different velocities and asked them to judge either their vitality form (gentle, neutral, rude) or their velocity (slow, medium, fast). The aim of the present study was to assess, using multi-voxel pattern analysis, whether vitality forms and velocities of observed goal-directed actions are differentially processed in the insula, and more specifically whether action velocity is encoded per se or it is an element that triggers neural populations of the insula encoding the vitality form. The results showed that, consistently across subjects, in the dorso-central sector of the insula there were voxels selectively tuned to vitality forms, while voxel tuned to velocity were rare. These results indicate that the dorso-central insula, which previous data showed to be involved in the vitality form processing, contains voxels specific for the action style processing.

Eliciting design patterns for e-learning systems

Science.gov (United States)

Retalis, Symeon; Georgiakakis, Petros; Dimitriadis, Yannis

2006-06-01

Design pattern creation, especially in the e-learning domain, is a highly complex process that has not been sufficiently studied and formalized. In this paper, we propose a systematic pattern development cycle, whose most important aspects focus on reverse engineering of existing systems in order to elicit features that are cross-validated through the use of appropriate, authentic scenarios. However, an iterative pattern process is proposed that takes advantage of multiple data sources, thus emphasizing a holistic view of the teaching learning processes. The proposed schema of pattern mining has been extensively validated for Asynchronous Network Supported Collaborative Learning (ANSCL) systems, as well as for other types of tools in a variety of scenarios, with promising results.

Turing Patterns in a Reaction-Diffusion System

International Nuclear Information System (INIS)

Wu Yanning; Wang Pingjian; Hou Chunju; Liu Changsong; Zhu Zhengang

2006-01-01

We have further investigated Turing patterns in a reaction-diffusion system by theoretical analysis and numerical simulations. Simple Turing patterns and complex superlattice structures are observed. We find that the shape and type of Turing patterns depend on dynamical parameters and external periodic forcing, and is independent of effective diffusivity rate σ in the Lengyel-Epstein model. Our numerical results provide additional insight into understanding the mechanism of development of Turing patterns and predicting new pattern formations.

Vitality Forms Processing in the Insula during Action Observation: A Multivoxel Pattern Analysis

Science.gov (United States)

Di Cesare, Giuseppe; Valente, Giancarlo; Di Dio, Cinzia; Ruffaldi, Emanuele; Bergamasco, Massimo; Goebel, Rainer; Rizzolatti, Giacomo

2016-01-01

Observing the style of an action done by others allows the observer to understand the cognitive state of the agent. This information has been defined by Stern “vitality forms”. Previous experiments showed that the dorso-central insula is selectively active both during vitality form observation and execution. In the present study, we presented participants with videos showing hand actions performed with different velocities and asked them to judge either their vitality form (gentle, neutral, rude) or their velocity (slow, medium, fast). The aim of the present study was to assess, using multi-voxel pattern analysis, whether vitality forms and velocities of observed goal-directed actions are differentially processed in the insula, and more specifically whether action velocity is encoded per se or it is an element that triggers neural populations of the insula encoding the vitality form. The results showed that, consistently across subjects, in the dorso-central sector of the insula there were voxels selectively tuned to vitality forms, while voxel tuned to velocity were rare. These results indicate that the dorso-central insula, which previous data showed to be involved in the vitality form processing, contains voxels specific for the action style processing. PMID:27375461

Evaluation of the utility of a glycemic pattern identification system.

Science.gov (United States)

Otto, Erik A; Tannan, Vinay

2014-07-01

With the increasing prevalence of systems allowing automated, real-time transmission of blood glucose data there is a need for pattern recognition techniques that can inform of deleterious patterns in glycemic control when people test. We evaluated the utility of pattern identification with a novel pattern identification system named Vigilant™ and compared it to standard pattern identification methods in diabetes. To characterize the importance of an identified pattern we evaluated the relative risk of future hypoglycemic and hyperglycemic events in diurnal periods following identification of a pattern in a data set of 536 patients with diabetes. We evaluated events 2 days, 7 days, 30 days, and 61-90 days from pattern identification, across diabetes types and cohorts of glycemic control, and also compared the system to 6 pattern identification methods consisting of deleterious event counts and percentages over 5-, 14-, and 30-day windows. Episodes of hypoglycemia, hyperglycemia, severe hypoglycemia, and severe hyperglycemia were 120%, 46%, 123%, and 76% more likely after pattern identification, respectively, compared to periods when no pattern was identified. The system was also significantly more predictive of deleterious events than other pattern identification methods evaluated, and was persistently predictive up to 3 months after pattern identification. The system identified patterns that are significantly predictive of deleterious glycemic events, and more so relative to many pattern identification methods used in diabetes management today. Further study will inform how improved pattern identification can lead to improved glycemic control. © 2014 Diabetes Technology Society.

Cutting blade dentitions in squaliform sharks form by modification of inherited alternate tooth ordering patterns

Science.gov (United States)

Underwood, Charlie; Johanson, Zerina; Smith, Moya Meredith

2016-11-01

The squaliform sharks represent one of the most speciose shark clades. Many adult squaliforms have blade-like teeth, either on both jaws or restricted to the lower jaw, forming a continuous, serrated blade along the jaw margin. These teeth are replaced as a single unit and successor teeth lack the alternate arrangement present in other elasmobranchs. Micro-CT scans of embryos of squaliforms and a related outgroup (Pristiophoridae) revealed that the squaliform dentition pattern represents a highly modified version of tooth replacement seen in other clades. Teeth of Squalus embryos are arranged in an alternate pattern, with successive tooth rows containing additional teeth added proximally. Asynchronous timing of tooth production along the jaw and tooth loss prior to birth cause teeth to align in oblique sets containing teeth from subsequent rows; these become parallel to the jaw margin during ontogeny, so that adult Squalus has functional tooth rows comprising obliquely stacked teeth of consecutive developmental rows. In more strongly heterodont squaliforms, initial embryonic lower teeth develop into the oblique functional sets seen in adult Squalus, with no requirement to form, and subsequently lose, teeth arranged in an initial alternate pattern.

A system for learning statistical motion patterns.

Science.gov (United States)

Hu, Weiming; Xiao, Xuejuan; Fu, Zhouyu; Xie, Dan; Tan, Tieniu; Maybank, Steve

2006-09-01

Analysis of motion patterns is an effective approach for anomaly detection and behavior prediction. Current approaches for the analysis of motion patterns depend on known scenes, where objects move in predefined ways. It is highly desirable to automatically construct object motion patterns which reflect the knowledge of the scene. In this paper, we present a system for automatically learning motion patterns for anomaly detection and behavior prediction based on a proposed algorithm for robustly tracking multiple objects. In the tracking algorithm, foreground pixels are clustered using a fast accurate fuzzy K-means algorithm. Growing and prediction of the cluster centroids of foreground pixels ensure that each cluster centroid is associated with a moving object in the scene. In the algorithm for learning motion patterns, trajectories are clustered hierarchically using spatial and temporal information and then each motion pattern is represented with a chain of Gaussian distributions. Based on the learned statistical motion patterns, statistical methods are used to detect anomalies and predict behaviors. Our system is tested using image sequences acquired, respectively, from a crowded real traffic scene and a model traffic scene. Experimental results show the robustness of the tracking algorithm, the efficiency of the algorithm for learning motion patterns, and the encouraging performance of algorithms for anomaly detection and behavior prediction.

Pattern transition between periodic Liesegang pattern and crystal growth regime in reaction-diffusion systems

Science.gov (United States)

Lagzi, István; Ueyama, Daishin

2009-01-01

The pattern transition between periodic precipitation pattern formation (Liesegang phenomenon) and pure crystal growth regimes is investigated in silver nitrate and potassium dichromate system in mixed agarose-gelatin gel. Morphologically different patterns were found depending on the quality of the gel, and transition between these typical patterns can be controlled by the concentration of gelatin in mixed gel. Effect of temperature and hydrodynamic force on precipitation pattern structure was also investigated.

Quantification of layered patterns with structural anisotropy: a comparison of biological and geological systems

Directory of Open Access Journals (Sweden)

I. Smolyar

2016-03-01

Full Text Available Large-scale patterns evident from satellite images of aeolian landforms on Earth and other planets; those of intermediate scale in marine and terrestrial sand ripples and sediment profiles; and small-scale patterns such as lamellae in the bones of vertebrates and annuli in fish scales are each represented by layers of different thicknesses and lengths. Layered patterns are important because they form a record of the state of internal and external factors that regulate pattern formation in these geological and biological systems. It is therefore potentially possible to recognize trends, periodicities, and events in the history of the formation of these systems among the incremental sequences. Though the structures and sizes of these 2-D patterns are typically scale-free, they are also characteristically anisotropic; that is, the number of layers and their absolute thicknesses vary significantly during formation. The aim of the present work is to quantify the structure of layered patterns and to reveal similarities and differences in the processing and interpretation of layered landforms and biological systems. To reach this goal we used N-partite graph and Boolean functions to quantify the structure of layers and plot charts for “layer thickness vs. layer number” and “layer area vs. layer number”. These charts serve as a source of information about events in the history of formation of layered systems. The concept of synchronization of layer formation across a 2-D plane is introduced to develop the procedure for plotting “layer thickness vs. layer number” and “layer area vs. layer number”, which takes into account the structural anisotropy of layered patterns and increase signal-to-noise ratio in charts. Examples include landforms on Mars and Earth and incremental layers in human and iguana bones.

Visual search for motion-form conjunctions: is form discriminated within the motion system?

Science.gov (United States)

von Mühlenen, A; Müller, H J

2001-06-01

Motion-form conjunction search can be more efficient when the target is moving (a moving 45 degrees tilted line among moving vertical and stationary 45 degrees tilted lines) rather than stationary. This asymmetry may be due to aspects of form being discriminated within a motion system representing only moving items, whereas discrimination of stationary items relies on a static form system (J. Driver & P. McLeod, 1992). Alternatively, it may be due to search exploiting differential motion velocity and direction signals generated by the moving-target and distractor lines. To decide between these alternatives, 4 experiments systematically varied the motion-signal information conveyed by the moving target and distractors while keeping their form difference salient. Moving-target search was found to be facilitated only when differential motion-signal information was available. Thus, there is no need to assume that form is discriminated within the motion system.

High Performance Embedded System for Real-Time Pattern Matching

CERN Document Server

Sotiropoulou, Calliope Louisa; The ATLAS collaboration; Gkaitatzis, Stamatios; Citraro, Saverio; Giannetti, Paola; Dell'Orso, Mauro

2016-01-01

In this paper we present an innovative and high performance embedded system for real-time pattern matching. This system is based on the evolution of hardware and algorithms developed for the field of High Energy Physics (HEP) and more specifically for the execution of extremely fast pattern matching for tracking of particles produced by proton-proton collisions in hadron collider experiments. A miniaturised version of this complex system is being developed for pattern matching in generic image processing applications. The system works as a contour identifier able to extract the salient features of an image. It is based on the principles of cognitive image processing, which means that it executes fast pattern matching and data reduction mimicking the operation of the human brain. The pattern matching can be executed by a custom designed Associative Memory (AM) chip. The reference patterns are chosen by a complex training algorithm implemented on an FPGA device. Post processing algorithms (e.g. pixel clustering...

High performance embedded system for real-time pattern matching

Energy Technology Data Exchange (ETDEWEB)

Sotiropoulou, C.-L., E-mail: c.sotiropoulou@cern.ch [University of Pisa, Largo B. Pontecorvo 3, 56127 Pisa (Italy); INFN-Pisa Section, Largo B. Pontecorvo 3, 56127 Pisa (Italy); Luciano, P. [University of Cassino and Southern Lazio, Gaetano di Biasio 43, Cassino 03043 (Italy); INFN-Pisa Section, Largo B. Pontecorvo 3, 56127 Pisa (Italy); Gkaitatzis, S. [Aristotle University of Thessaloniki, 54124 Thessaloniki (Greece); Citraro, S. [University of Pisa, Largo B. Pontecorvo 3, 56127 Pisa (Italy); INFN-Pisa Section, Largo B. Pontecorvo 3, 56127 Pisa (Italy); Giannetti, P. [INFN-Pisa Section, Largo B. Pontecorvo 3, 56127 Pisa (Italy); Dell' Orso, M. [University of Pisa, Largo B. Pontecorvo 3, 56127 Pisa (Italy); INFN-Pisa Section, Largo B. Pontecorvo 3, 56127 Pisa (Italy)

2017-02-11

In this paper we present an innovative and high performance embedded system for real-time pattern matching. This system is based on the evolution of hardware and algorithms developed for the field of High Energy Physics and more specifically for the execution of extremely fast pattern matching for tracking of particles produced by proton–proton collisions in hadron collider experiments. A miniaturized version of this complex system is being developed for pattern matching in generic image processing applications. The system works as a contour identifier able to extract the salient features of an image. It is based on the principles of cognitive image processing, which means that it executes fast pattern matching and data reduction mimicking the operation of the human brain. The pattern matching can be executed by a custom designed Associative Memory chip. The reference patterns are chosen by a complex training algorithm implemented on an FPGA device. Post processing algorithms (e.g. pixel clustering) are also implemented on the FPGA. The pattern matching can be executed on a 2D or 3D space, on black and white or grayscale images, depending on the application and thus increasing exponentially the processing requirements of the system. We present the firmware implementation of the training and pattern matching algorithm, performance and results on a latest generation Xilinx Kintex Ultrascale FPGA device. - Highlights: • A high performance embedded system for real-time pattern matching is proposed. • It is based on a system developed for High Energy Physics experiment triggers. • It mimics the operation of the human brain (cognitive image processing). • The process can be executed on 2D and 3D, black and white or grayscale images. • The implementation uses FPGAs and custom designed associative memory (AM) chips.

High performance embedded system for real-time pattern matching

International Nuclear Information System (INIS)

Sotiropoulou, C.-L.; Luciano, P.; Gkaitatzis, S.; Citraro, S.; Giannetti, P.; Dell'Orso, M.

2017-01-01

In this paper we present an innovative and high performance embedded system for real-time pattern matching. This system is based on the evolution of hardware and algorithms developed for the field of High Energy Physics and more specifically for the execution of extremely fast pattern matching for tracking of particles produced by proton–proton collisions in hadron collider experiments. A miniaturized version of this complex system is being developed for pattern matching in generic image processing applications. The system works as a contour identifier able to extract the salient features of an image. It is based on the principles of cognitive image processing, which means that it executes fast pattern matching and data reduction mimicking the operation of the human brain. The pattern matching can be executed by a custom designed Associative Memory chip. The reference patterns are chosen by a complex training algorithm implemented on an FPGA device. Post processing algorithms (e.g. pixel clustering) are also implemented on the FPGA. The pattern matching can be executed on a 2D or 3D space, on black and white or grayscale images, depending on the application and thus increasing exponentially the processing requirements of the system. We present the firmware implementation of the training and pattern matching algorithm, performance and results on a latest generation Xilinx Kintex Ultrascale FPGA device. - Highlights: • A high performance embedded system for real-time pattern matching is proposed. • It is based on a system developed for High Energy Physics experiment triggers. • It mimics the operation of the human brain (cognitive image processing). • The process can be executed on 2D and 3D, black and white or grayscale images. • The implementation uses FPGAs and custom designed associative memory (AM) chips.

Life-forms and seasonal patterns in the pteridophytes in Zambia

Directory of Open Access Journals (Sweden)

Jan Kornaś

2015-01-01

Full Text Available 146 species of pteridophytes occurring in Zambia were classified into Raunkiaer's life-form classes. The hemicryptophytes are dominant and include the most widely distributed species. The phanerophytes (tree-ferns and lianas and the epiphytes are rather scarce and limited to or concentrated in the higher-rainfall areas in the northern part of the country. Simplified diagrams of periodicity were constructed for all Zambian pteridophyte species. Three major types of seasonal pattern of growth and dormancy were distinguished: the evergreen type, the poikilohydrous type, and the "summer-green" type. The first of them is connected with the local conditions of continuously wet non-zonal sites, while the two others clearly reflect the peculiarities of the zonal climate of Zambia.

Synthesis of freeform refractive surfaces forming various radiation patterns using interpolation

Science.gov (United States)

Voznesenskaya, Anna; Mazur, Iana; Krizskiy, Pavel

2017-09-01

Optical freeform surfaces are very popular today in such fields as lighting systems, sensors, photovoltaic concentrators, and others. The application of such surfaces allows to obtain systems with a new quality with a reduced number of optical components to ensure high consumer characteristics: small size, weight, high optical transmittance. This article presents the methods of synthesis of refractive surface for a given source and the radiation pattern of various shapes using a computer simulation cubic spline interpolation.

Automated pattern recognition system for noise analysis

International Nuclear Information System (INIS)

Sides, W.H. Jr.; Piety, K.R.

1980-01-01

A pattern recognition system was developed at ORNL for on-line monitoring of noise signals from sensors in a nuclear power plant. The system continuousy measures the power spectral density (PSD) values of the signals and the statistical characteristics of the PSDs in unattended operation. Through statistical comparison of current with past PSDs (pattern recognition), the system detects changes in the noise signals. Because the noise signals contain information about the current operational condition of the plant, a change in these signals could indicate a change, either normal or abnormal, in the operational condition

Evolution of the insect terminal patterning system--insights from the milkweed bug, Oncopeltus fasciatus.

Science.gov (United States)

Weisbrod, Anat; Cohen, Mira; Chipman, Ariel D

2013-08-01

The anterior and posterior ends of the insect embryo are patterned through the terminal patterning system, which is best known from the fruitfly Drosophila melanogaster. In Drosophila, the RTK receptor Torso and its presumed co-activator Torso-like initiate a signaling cascade, which activates two terminal gap genes, tailless and huckebein. These in turn interact with various patterning genes to define terminal structures. Work on other insect species has shown that this system is poorly conserved, and not all of its components have been found in all cases studied. We place the variability of the system within a broader phylogenetic framework. We describe the expression and knock-down phenotypes of the homologues of terminal patterning genes in the hemimetabolous Oncopeltus fasciatus. We have examined the interactions among these genes and between them and other patterning genes. We demonstrate that all of these genes have different roles in Oncopeltus relative to Drosophila; torso-like is expressed in follicle cells during oogenesis and is involved in the invagination of the blastoderm to form the germ band, and possibly also in defining the growth zone; tailless is regulated by orthodenticle and has a role only in anterior determination; huckebein is expressed only in the middle of the blastoderm; finally, torso was not found in Oncopeltus and its role in terminal patterning seems novel within holometabolous insects. We then use our data, together with published data on other insects, to reconstruct the evolution of the terminal patterning gene network in insects. We suggest that the Drosophila terminal patterning network evolved recently in the lineage leading to the Diptera, and represents an example of evolutionary "tinkering", where pre-existing pathways are co-opted for a new function. Copyright © 2013 Elsevier Inc. All rights reserved.

Embryonic origins of a motor system: motor dendrites form a myotopic map in Drosophila.

Directory of Open Access Journals (Sweden)

Matthias Landgraf

2003-11-01

Full Text Available The organisational principles of locomotor networks are less well understood than those of many sensory systems, where in-growing axon terminals form a central map of peripheral characteristics. Using the neuromuscular system of the Drosophila embryo as a model and retrograde tracing and genetic methods, we have uncovered principles underlying the organisation of the motor system. We find that dendritic arbors of motor neurons, rather than their cell bodies, are partitioned into domains to form a myotopic map, which represents centrally the distribution of body wall muscles peripherally. While muscles are segmental, the myotopic map is parasegmental in organisation. It forms by an active process of dendritic growth independent of the presence of target muscles, proper differentiation of glial cells, or (in its initial partitioning competitive interactions between adjacent dendritic domains. The arrangement of motor neuron dendrites into a myotopic map represents a first layer of organisation in the motor system. This is likely to be mirrored, at least in part, by endings of higher-order neurons from central pattern-generating circuits, which converge onto the motor neuron dendrites. These findings will greatly simplify the task of understanding how a locomotor system is assembled. Our results suggest that the cues that organise the myotopic map may be laid down early in development as the embryo subdivides into parasegmental units.

Divergent methylation pattern in adult stage between two forms of Tetranychus urticae (Acari: Tetranychidae).

Science.gov (United States)

Yang, Si-Xia; Guo, Chao; Zhao, Xiu-Ting; Sun, Jing-Tao; Hong, Xiao-Yue

2017-02-19

The two-spotted spider mite, Tetranychus urticae Koch has two forms: green form and red form. Understanding the molecular basis of how these two forms established without divergent genetic background is an intriguing area. As a well-known epigenetic process, DNA methylation has particularly important roles in gene regulation and developmental variation across diverse organisms that do not alter genetic background. Here, to investigate whether DNA methylation could be associated with different phenotypic consequences in the two forms of T. urticae, we surveyed the genome-wide cytosine methylation status and expression level of DNA methyltransferase 3 (Tudnmt3) throughout their entire life cycle. Methylation-sensitive amplification polymorphism (MSAP) analyses of 585 loci revealed variable methylation patterns in the different developmental stages. In particular, principal coordinates analysis (PCoA) indicates a significant epigenetic differentiation between female adults of the two forms. The gene expression of Tudnmt3 was detected in all examined developmental stages, which was significantly different in the adult stage of the two forms. Together, our results reveal the epigenetic distance between the two forms of T. urticae, suggesting that DNA methylation might be implicated in different developmental demands, and contribute to different phenotypes in the adult stage of these two forms. © 2017 Institute of Zoology, Chinese Academy of Sciences.

Making embedded systems design patterns for great software

CERN Document Server

White, Elecia

2011-01-01

Interested in developing embedded systems? Since they don't tolerate inefficiency, these systems require a disciplined approach to programming. This easy-to-read guide helps you cultivate a host of good development practices, based on classic software design patterns and new patterns unique to embedded programming. Learn how to build system architecture for processors, not operating systems, and discover specific techniques for dealing with hardware difficulties and manufacturing requirements. Written by an expert who's created embedded systems ranging from urban surveillance and DNA scanner

Multivariate statistical pattern recognition system for reactor noise analysis

International Nuclear Information System (INIS)

Gonzalez, R.C.; Howington, L.C.; Sides, W.H. Jr.; Kryter, R.C.

1976-01-01

A multivariate statistical pattern recognition system for reactor noise analysis was developed. The basis of the system is a transformation for decoupling correlated variables and algorithms for inferring probability density functions. The system is adaptable to a variety of statistical properties of the data, and it has learning, tracking, and updating capabilities. System design emphasizes control of the false-alarm rate. The ability of the system to learn normal patterns of reactor behavior and to recognize deviations from these patterns was evaluated by experiments at the ORNL High-Flux Isotope Reactor (HFIR). Power perturbations of less than 0.1 percent of the mean value in selected frequency ranges were detected by the system

Multivariate statistical pattern recognition system for reactor noise analysis

International Nuclear Information System (INIS)

Gonzalez, R.C.; Howington, L.C.; Sides, W.H. Jr.; Kryter, R.C.

1975-01-01

A multivariate statistical pattern recognition system for reactor noise analysis was developed. The basis of the system is a transformation for decoupling correlated variables and algorithms for inferring probability density functions. The system is adaptable to a variety of statistical properties of the data, and it has learning, tracking, and updating capabilities. System design emphasizes control of the false-alarm rate. The ability of the system to learn normal patterns of reactor behavior and to recognize deviations from these patterns was evaluated by experiments at the ORNL High-Flux Isotope Reactor (HFIR). Power perturbations of less than 0.1 percent of the mean value in selected frequency ranges were detected by the system. 19 references

Tidal-induced large-scale regular bed form patterns in a three-dimensional shallow water model

NARCIS (Netherlands)

Hulscher, Suzanne J.M.H.

1996-01-01

The three-dimensional model presented in this paper is used to study how tidal currents form wave-like bottom patterns. Inclusion of vertical flow structure turns out to be necessary to describe the formation, or absence, of all known large-scale regular bottom features. The tide and topography are

Magnetic Assisted Colloidal Pattern Formation

Science.gov (United States)

Yang, Ye

Pattern formation is a mysterious phenomenon occurring at all scales in nature. The beauty of the resulting structures and myriad of resulting properties occurring in naturally forming patterns have attracted great interest from scientists and engineers. One of the most convenient experimental models for studying pattern formation are colloidal particle suspensions, which can be used both to explore condensed matter phenomena and as a powerful fabrication technique for forming advanced materials. In my thesis, I have focused on the study of colloidal patterns, which can be conveniently tracked in an optical microscope yet can also be thermally equilibrated on experimentally relevant time scales, allowing for ground states and transitions between them to be studied with optical tracking algorithms. In particular, I have focused on systems that spontaneously organize due to particle-surface and particle-particle interactions, paying close attention to systems that can be dynamically adjusted with an externally applied magnetic or acoustic field. In the early stages of my doctoral studies, I developed a magnetic field manipulation technique to quantify the adhesion force between particles and surfaces. This manipulation technique is based on the magnetic dipolar interactions between colloidal particles and their "image dipoles" that appear within planar substrate. Since the particles interact with their own images, this system enables massively parallel surface force measurements (>100 measurements) in a single experiment, and allows statistical properties of particle-surface adhesion energies to be extracted as a function of loading rate. With this approach, I was able to probe sub-picoNewton surface interactions between colloidal particles and several substrates at the lowest force loading rates ever achieved. In the later stages of my doctoral studies, I focused on studying patterns formed from particle-particle interaction, which serve as an experimental model of

Genome sequence of the pattern forming Paenibacillus vortex bacterium reveals potential for thriving in complex environments

NARCIS (Netherlands)

Sirota-Madi, A.; Olender, T.; Helman, Y.; Ingham, C.; Brainis, I.; Roth, D.; Hagi, E.; Brodsky, L.; Leshkowitz, D.; Galatenko, V.; Nikolaev, V.; Mugasimangalam, R.C.; Bransburg-Zabary, S.; Gutnick, D.L.; Lancet, D.; Ben-Jacob, E.

2010-01-01

Background: The pattern-forming bacterium Paenibacillus vortex is notable for its advanced social behavior, which is reflected in development of colonies with highly intricate architectures. Prior to this study, only two other Paenibacillus species (Paenibacillus sp. JDR-2 and Paenibacillus larvae)

Comparing urban form correlations of the travel patterns of older and younger adults

DEFF Research Database (Denmark)

Meza, Maria Josefina Figueroa; Nielsen, Thomas Alexander Sick; Siren, Anu Kristiina

2014-01-01

Using disaggregated data from the Danish National Travel Survey conducted between 2006 - 2011, this study compares the travel patterns of older (65 – 84 years of age) and younger (18 – 64 years of age) adults regarding land use, socio-economic conditions and urban structures. The results highlight...... significant differences between travel patterns and their urban form correlates for the older and younger adult populations. Spatial variables such as density and regional accessibility have different and potentially reverse associations with travel among older adults. The car use of older adults...... is not substituted by other modes in high-density settings, as is the case for younger adults. Older adults do not respond to high regional accessibility by reducing distance traveled, but travel longer and are also more likely to continue using a car in high-access conditions. Spatial structural conditions have...

Efficient Mining and Detection of Sequential Intrusion Patterns for Network Intrusion Detection Systems

Science.gov (United States)

Shyu, Mei-Ling; Huang, Zifang; Luo, Hongli

In recent years, pervasive computing infrastructures have greatly improved the interaction between human and system. As we put more reliance on these computing infrastructures, we also face threats of network intrusion and/or any new forms of undesirable IT-based activities. Hence, network security has become an extremely important issue, which is closely connected with homeland security, business transactions, and people's daily life. Accurate and efficient intrusion detection technologies are required to safeguard the network systems and the critical information transmitted in the network systems. In this chapter, a novel network intrusion detection framework for mining and detecting sequential intrusion patterns is proposed. The proposed framework consists of a Collateral Representative Subspace Projection Modeling (C-RSPM) component for supervised classification, and an inter-transactional association rule mining method based on Layer Divided Modeling (LDM) for temporal pattern analysis. Experiments on the KDD99 data set and the traffic data set generated by a private LAN testbed show promising results with high detection rates, low processing time, and low false alarm rates in mining and detecting sequential intrusion detections.

A bio-inspired spatial patterning circuit.

Science.gov (United States)

Chen, Kai-Yuan; Joe, Danial J; Shealy, James B; Land, Bruce R; Shen, Xiling

2014-01-01

Lateral Inhibition (LI) is a widely conserved patterning mechanism in biological systems across species. Distinct from better-known Turing patterns, LI depend on cell-cell contact rather than diffusion. We built an in silico genetic circuit model to analyze the dynamic properties of LI. The model revealed that LI amplifies differences between neighboring cells to push them into opposite states, hence forming stable 2-D patterns. Inspired by this insight, we designed and implemented an electronic circuit that recapitulates LI patterning dynamics. This biomimetic system serve as a physical model to elucidate the design principle of generating robust patterning through spatial feedback, regardless of the underlying devices being biological or electrical.

Image processing system for flow pattern measurements

International Nuclear Information System (INIS)

Ushijima, Satoru; Miyanaga, Yoichi; Takeda, Hirofumi

1989-01-01

This paper describes the development and application of an image processing system for measurements of flow patterns occuring in natural circulation water flows. In this method, the motions of particles scattered in the flow are visualized by a laser light slit and they are recorded on normal video tapes. These image data are converted to digital data with an image processor and then transfered to a large computer. The center points and pathlines of the particle images are numerically analized, and velocity vectors are obtained with these results. In this image processing system, velocity vectors in a vertical plane are measured simultaneously, so that the two dimensional behaviors of various eddies, with low velocity and complicated flow patterns usually observed in natural circulation flows, can be determined almost quantitatively. The measured flow patterns, which were obtained from natural circulation flow experiments, agreed with photographs of the particle movements, and the validity of this measuring system was confirmed in this study. (author)

High Performance Embedded System for Real-Time Pattern Matching

CERN Document Server

Sotiropoulou, Calliope Louisa; The ATLAS collaboration; Gkaitatzis, Stamatios; Citraro, Saverio; Giannetti, Paola; Dell'Orso, Mauro

2016-01-01

We present an innovative and high performance embedded system for real-time pattern matching. This system is based on the evolution of hardware and algorithms developed for the field of High Energy Physics (HEP) and more specifically for the execution of extremely fast pattern matching for tracking of particles produced by proton-proton collisions in hadron collider experiments. A miniaturized version of this complex system is being developed for pattern matching in generic image processing applications. The design uses the flexibility of Field Programmable Gate Arrays (FPGAs) and the powerful Associative Memory Chip (ASIC) to achieve real-time performance. The system works as a contour identifier able to extract the salient features of an image. It is based on the principles of cognitive image processing, which means that it executes fast pattern matching and data reduction mimicking the operation of the human brain.

Slab edge insulating form system and methods

Science.gov (United States)

Lee, Brain E [Corral de Tierra, CA; Barsun, Stephan K [Davis, CA; Bourne, Richard C [Davis, CA; Hoeschele, Marc A [Davis, CA; Springer, David A [Winters, CA

2009-10-06

A method of forming an insulated concrete foundation is provided comprising constructing a foundation frame, the frame comprising an insulating form having an opening, inserting a pocket former into the opening; placing concrete inside the foundation frame; and removing the pocket former after the placed concrete has set, wherein the concrete forms a pocket in the placed concrete that is accessible through the opening. The method may further comprise sealing the opening by placing a sealing plug or sealing material in the opening. A system for forming an insulated concrete foundation is provided comprising a plurality of interconnected insulating forms, the insulating forms having a rigid outer member protecting and encasing an insulating material, and at least one gripping lip extending outwardly from the outer member to provide a pest barrier. At least one insulating form has an opening into which a removable pocket former is inserted. The system may also provide a tension anchor positioned in the pocket former and a tendon connected to the tension anchor.

Normal form and synchronization of strict-feedback chaotic systems

International Nuclear Information System (INIS)

Wang, Feng; Chen, Shihua; Yu Minghai; Wang Changping

2004-01-01

This study concerns the normal form and synchronization of strict-feedback chaotic systems. We prove that, any strict-feedback chaotic system can be rendered into a normal form with a invertible transform and then a design procedure to synchronize the normal form of a non-autonomous strict-feedback chaotic system is presented. This approach needs only a scalar driving signal to realize synchronization no matter how many dimensions the chaotic system contains. Furthermore, the Roessler chaotic system is taken as a concrete example to illustrate the procedure of designing without transforming a strict-feedback chaotic system into its normal form. Numerical simulations are also provided to show the effectiveness and feasibility of the developed methods

Ore-forming environment and ore-forming system of carbonaceous-siliceous-pelitic rock type uranium deposit in China

International Nuclear Information System (INIS)

Qi Fucheng; Zhang Zilong; Li Zhixing; He Zhongbo; Wang Wenquan

2012-01-01

It is proposed that there are four types of ore-forming systems about carbonaceous-siliceous-pelitic rock type uranium deposit in China based on systematic study on structural environment and distribution regularity of uraniferous construction of marine carbonaceous-siliceous-pelitic rock in China: continental margin rift valley ore-forming systems, continental margin rifting deep fracture zone ore-forming systems, landmass boundary borderland basin ore-forming systems and epicontinental mobile belt downfaulted aulacogen ore-forming systems. It is propounded definitely that it is controlled by margin rift valley ore-forming systems and continental margin rifting deep fracture zone ore-forming systems for large-scale uranium mineralization of carbonaceous-siliceous-pelitic rock type uranium deposit in China, which is also controlled by uraniferous marine carbonaceous-siliceous-pelitic rock construction made up of silicalite, siliceous phosphorite and carbonaceous-siliceous-pelitic rock, which settled down accompany with submarine backwash and sub marine volcanic eruption in margin rift valley and continental margin rifting mineralizing environment. Continental mar gin rift valley and continental margin rifting thermal sedimentation or exhalation sedimentation is the mechanism of forming large-scale uraniferous marine carbonaceous-siliceous-pelitic rock construction Early Palaeozoic Era in China or large-scale uranium-polymetallic mineralization. (authors)

Rotation-invariant neural pattern recognition system with application to coin recognition.

Science.gov (United States)

Fukumi, M; Omatu, S; Takeda, F; Kosaka, T

1992-01-01

In pattern recognition, it is often necessary to deal with problems to classify a transformed pattern. A neural pattern recognition system which is insensitive to rotation of input pattern by various degrees is proposed. The system consists of a fixed invariance network with many slabs and a trainable multilayered network. The system was used in a rotation-invariant coin recognition problem to distinguish between a 500 yen coin and a 500 won coin. The results show that the approach works well for variable rotation pattern recognition.

Patterning in systems driven by nonlocal external forces.

Science.gov (United States)

Luneville, L; Mallick, K; Pontikis, V; Simeone, D

2016-11-01

This work focuses on systems displaying domain patterns resulting from competing external and internal dynamics. To this end, we introduce a Lyapunov functional capable of describing the steady states of systems subject to external forces, by adding nonlocal terms to the Landau Ginzburg free energy of the system. Thereby, we extend the existing methodology treating long-range order interactions, to the case of external nonlocal forces. By studying the quadratic term of this Lyapunov functional, we compute the phase diagram in the temperature versus external field and we determine all possible modulated phases (domain patterns) as a function of the external forces and the temperature. Finally, we investigate patterning in chemical reactive mixtures and binary mixtures under irradiation, and we show that the last case opens the path toward micro-structural engineering of materials.

Molecular insights into the origin of the Hox-TALE patterning system.

Science.gov (United States)

Hudry, Bruno; Thomas-Chollier, Morgane; Volovik, Yael; Duffraisse, Marilyne; Dard, Amélie; Frank, Dale; Technau, Ulrich; Merabet, Samir

2014-03-18

Despite tremendous body form diversity in nature, bilaterian animals share common sets of developmental genes that display conserved expression patterns in the embryo. Among them are the Hox genes, which define different identities along the anterior-posterior axis. Hox proteins exert their function by interaction with TALE transcription factors. Hox and TALE members are also present in some but not all non-bilaterian phyla, raising the question of how Hox-TALE interactions evolved to provide positional information. By using proteins from unicellular and multicellular lineages, we showed that these networks emerged from an ancestral generic motif present in Hox and other related protein families. Interestingly, Hox-TALE networks experienced additional and extensive molecular innovations that were likely crucial for differentiating Hox functions along body plans. Together our results highlight how homeobox gene families evolved during eukaryote evolution to eventually constitute a major patterning system in Eumetazoans. DOI: http://dx.doi.org/10.7554/eLife.01939.001.

Laser micromachined wax-covered plastic paper as both sputter deposition shadow masks and deep-ultraviolet patterning masks for polymethylmethacrylate-based microfluidic systems

KAUST Repository

Fan, Yiqiang

2013-12-16

We report a technically innovative method of fabricating masks for both deep-ultraviolet (UV) patterning and metal sputtering on polymethylmethacrylate (PMMA) for microfluidic systems. We used a CO2 laser system to cut the required patterns on wax-covered plastic paper; the laser-patterned wax paper will either work as a mask for deep-UV patterning or as a mask for metal sputtering. A microfluidic device was also fabricated to demonstrate the feasibility of this method. The device has two layers: the first layer is a 1-mm thick PMMA substrate that was patterned by deep-UV exposure to create microchannels. The mask used in this process was the laser-cut wax paper. The second layer, also a 1-mm thick PMMA layer, was gold sputtered with patterned wax paper as the shadow mask. These two pieces of PMMA were then bonded to form microchannels with exposed electrodes. This process is a simple and rapid method for creating integrated microfluidic systems that do not require cleanroom facilities.

Juvenile idiopathic arthritis (JIA): a screening study to measure class II skeletal pattern, TMJ PDS and use of systemic corticosteroids.

LENUS (Irish Health Repository)

Mandall, Nicky A

2010-03-01

To screen patients with oligoarticular and polyarticular forms of Juvenile Idiopathic Arthritis (JIA) to determine (i) the severity of their class II skeletal pattern; (ii) temporomandibular joint signs and symptoms and (iii) use of systemic corticosteroids.

Power Terminal Communication Access Network Monitoring System Scheme Based on Design Patterns

Science.gov (United States)

Yan, Shengchao; Wu, Desheng; Zhu, Jiang

2018-01-01

In order to realize patterns design for terminal communication monitoring system, this paper introduces manager-workers, tasks-workers design patterns, based on common design patterns such as factory method, chain of responsibility, facade. Using these patterns, the communication monitoring system which combines module-groups like networking communication, business data processing and the peripheral support has been designed successfully. Using these patterns makes this system have great flexibility and scalability and improves the degree of systematic pattern design structure.

Pattern Laser Annealing by a Pulsed Laser

Science.gov (United States)

Komiya, Yoshio; Hoh, Koichiro; Murakami, Koichi; Takahashi, Tetsuo; Tarui, Yasuo

1981-10-01

Preliminary experiments with contact-type pattern laser annealing were made for local polycrystallization of a-Si, local evaporation of a-Si and local formation of Ni-Si alloy. These experiments showed that the mask patterns can be replicated as annealed regions with a resolution of a few microns on substrates. To overcome shortcomings due to the contact type pattern annealing, a projection type reduction pattern laser annealing system is proposed for resistless low temperature pattern forming processes.

Pattern-oriented modelling: a 'multi-scope' for predictive systems ecology.

Science.gov (United States)

Grimm, Volker; Railsback, Steven F

2012-01-19

Modern ecology recognizes that modelling systems across scales and at multiple levels-especially to link population and ecosystem dynamics to individual adaptive behaviour-is essential for making the science predictive. 'Pattern-oriented modelling' (POM) is a strategy for doing just this. POM is the multi-criteria design, selection and calibration of models of complex systems. POM starts with identifying a set of patterns observed at multiple scales and levels that characterize a system with respect to the particular problem being modelled; a model from which the patterns emerge should contain the right mechanisms to address the problem. These patterns are then used to (i) determine what scales, entities, variables and processes the model needs, (ii) test and select submodels to represent key low-level processes such as adaptive behaviour, and (iii) find useful parameter values during calibration. Patterns are already often used in these ways, but a mini-review of applications of POM confirms that making the selection and use of patterns more explicit and rigorous can facilitate the development of models with the right level of complexity to understand ecological systems and predict their response to novel conditions.

Influence of system considerations on waste form design

International Nuclear Information System (INIS)

Bauer, A.A.; Matthews, S.C.; Peterson, R.W.

1979-01-01

The design of waste forms is constrained by waste management system considerations imposed during generation, treatment, packaging, transportation, storage, and isolation. In the isolation phase, the waste form provides one of the barriers to release in a multibarrier system that includes the natural geologic and hydrologic barriers as well as other engineered barriers

Pattern formation in three-dimensional reaction-diffusion systems

Science.gov (United States)

Callahan, T. K.; Knobloch, E.

1999-08-01

Existing group theoretic analysis of pattern formation in three dimensions [T.K. Callahan, E. Knobloch, Symmetry-breaking bifurcations on cubic lattices, Nonlinearity 10 (1997) 1179-1216] is used to make specific predictions about the formation of three-dimensional patterns in two models of the Turing instability, the Brusselator model and the Lengyel-Epstein model. Spatially periodic patterns having the periodicity of the simple cubic (SC), face-centered cubic (FCC) or body-centered cubic (BCC) lattices are considered. An efficient center manifold reduction is described and used to identify parameter regimes permitting stable lamellæ, SC, FCC, double-diamond, hexagonal prism, BCC and BCCI states. Both models possess a special wavenumber k* at which the normal form coefficients take on fixed model-independent ratios and both are described by identical bifurcation diagrams. This property is generic for two-species chemical reaction-diffusion models with a single activator and inhibitor.

Spray-formed tooling

Science.gov (United States)

McHugh, K. M.; Key, J. F.

The United States Council for Automotive Research (USCAR) has formed a partnership with the Idaho National Engineering Laboratory (INEL) to develop a process for the rapid production of low-cost tooling based on spray forming technology developed at the INEL. Phase 1 of the program will involve bench-scale system development, materials characterization, and process optimization. In Phase 2, prototype systems will be designed, constructed, evaluated, and optimized. Process control and other issues that influence commercialization will be addressed during this phase of the project. Technology transfer to USCAR, or a tooling vendor selected by USCAR, will be accomplished during Phase 3. The approach INEL is using to produce tooling, such as plastic injection molds and stamping dies, combines rapid solidification processing and net-shape materials processing into a single step. A bulk liquid metal is pressure-fed into a de Laval spray nozzle transporting a high velocity, high temperature inert gas. The gas jet disintegrates the metal into fine droplets and deposits them onto a tool pattern made from materials such as plastic, wax, clay, ceramics, and metals. The approach is compatible with solid freeform fabrication techniques such as stereolithography, selective laser sintering, and laminated object manufacturing. Heat is extracted rapidly, in-flight, by convection as the spray jet entrains cool inert gas to produce undercooled and semi-solid droplets. At the pattern, the droplets weld together while replicating the shape and surface features of the pattern. Tool formation is rapid; deposition rates in excess of 1 ton/h have been demonstrated for bench-scale nozzles.

Spatial pattern and ecological process in the coffee agroforestry system.

Science.gov (United States)

Perfecto, Ivette; Vandermeer, John

2008-04-01

The coffee agroforestry system provides an ideal platform for the study of spatial ecology. The uniform pattern of the coffee plants and shade trees allows for the study of pattern generation through intrinsic biological forces rather than extrinsic habitat patchiness. Detailed studies, focusing on a key mutualism between an ant (Azteca instabilis) and a scale insect (Coccus viridis), conducted in a 45-ha plot in a coffee agroforestry system have provided insights into (1) the quantitative evaluation of spatial pattern of the scale insect Coccus viridis on coffee bushes, (2) the mechanisms for the generation of patterns through the combination of local satellite ant nest formation and regional control from natural enemies, and (3) the consequences of the spatial pattern for the stability of predator-prey (host-parasitoid) systems, for a key coccinelid beetle preying on the scale insects and a phorid fly parasitoid parasitizing the ant.

Synchronized femtosecond laser pulse switching system based nano-patterning technology

Science.gov (United States)

Sohn, Ik-Bu; Choi, Hun-Kook; Yoo, Dongyoon; Noh, Young-Chul; Sung, Jae-Hee; Lee, Seong-Ku; Ahsan, Md. Shamim; Lee, Ho

2017-07-01

This paper demonstrates the design and development of a synchronized femtosecond laser pulse switching system and its applications in nano-patterning of transparent materials. Due to synchronization, we are able to control the location of each irradiated laser pulse in any kind of substrate. The control over the scanning speed and scanning step of the laser beam enables us to pattern periodic micro/nano-metric holes, voids, and/or lines in various materials. Using the synchronized laser system, we pattern synchronized nano-holes on the surface of and inside various transparent materials including fused silica glass and polymethyl methacrylate to replicate any image or pattern on the surface of or inside (transparent) materials. We also investigate the application areas of the proposed synchronized femtosecond laser pulse switching system in a diverse field of science and technology, especially in optical memory, color marking, and synchronized micro/nano-scale patterning of materials.

Improved pattern recognition systems by hybrid methods

International Nuclear Information System (INIS)

Duerr, B.; Haettich, W.; Tropf, H.; Winkler, G.; Fraunhofer-Gesellschaft zur Foerderung der Angewandten Forschung e.V., Karlsruhe

1978-12-01

This report describes a combination of statistical and syntactical pattern recongition methods. The hierarchically structured recognition system consists of a conventional statistical classifier, a structural classifier analysing the topological composition of the patterns, a stage reducing the number of hypotheses made by the first two stages, and a mixed stage based on a search for maximum similarity between syntactically generated prototypes and patterns. The stages work on different principles to avoid mistakes made in one stage in the other stages. This concept is applied to the recognition of numerals written without constraints. If no samples are rejected, a recognition rate of 99,5% is obtained. (orig.) [de

Pattern formation in reaction diffusion systems with finite geometry

International Nuclear Information System (INIS)

Borzi, C.; Wio, H.

1990-04-01

We analyze the one-component, one-dimensional, reaction-diffusion equation through a simple inverse method. We confine the system and fix the boundary conditions as to induce pattern formation. We analyze the stability of those patterns. Our goal is to get information about the reaction term out of the preknowledgment of the pattern. (author). 5 refs

Computational Analysis of G-Quadruplex Forming Sequences across Chromosomes Reveals High Density Patterns Near the Terminal Ends.

Directory of Open Access Journals (Sweden)

Julia H Chariker

Full Text Available G-quadruplex structures (G4 are found throughout the human genome and are known to play a regulatory role in a variety of molecular processes. Structurally, they have many configurations and can form from one or more DNA strands. At the gene level, they regulate gene expression and protein synthesis. In this paper, chromosomal-level patterns of distribution are analyzed on the human genome to identify high-level distribution patterns potentially related to global functional processes. Here we show unique high density banding patterns on individual chromosomes that are highly correlated, appearing in a mirror pattern, across forward and reverse DNA strands. The highest density of G4 sequences occurs within four megabases of one end of most chromosomes and contains G4 motifs that bind with zinc finger proteins. These findings suggest that G4 may play a role in global chromosomal processes such as those found in meiosis.

Autonomic nervous system response patterns specificity to basic emotions.

Science.gov (United States)

Collet, C; Vernet-Maury, E; Delhomme, G; Dittmar, A

1997-01-12

The aim of this study was to test the assumption that the autonomic nervous system responses to emotional stimuli are specific. A series of six slides was randomly presented to the subjects while six autonomic nervous system (ANS) parameters were recorded: skin conductance, skin potential, skin resistance, skin blood flow, skin temperature and instantaneous respiratory frequency. Each slide induced a basic emotion: happiness, surprise, anger, fear, sadness and disgust. Results have been first considered with reference to electrodermal responses (EDR) and secondly through thermo-vascular and respiratory variations. Classical as well as original indices were used to quantify autonomic responses. The six basic emotions were distinguished by Friedman variance analysis. Thus, ANS values corresponding to each emotion were compared two-by-two. EDR distinguished 13 emotion-pairs out of 15. 10 emotion-pairs were separated by skin resistance as well as skin conductance ohmic perturbation duration indices whereas conductance amplitude was only capable of distinguishing 7 emotion-pairs. Skin potential responses distinguished surprise and fear from sadness, and fear from disgust, according to their elementary pattern analysis in form and sign. Two-by-two comparisons of skin temperature, skin blood flow (estimated by the new non-oscillary duration index) and instantaneous respiratory frequency, enabled the distinction of 14 emotion-pairs out of 15. 9 emotion-pairs were distinguished by the non-oscillatory duration index values. Skin temperature was demonstrated to be different i.e. positive versus negative in response to anger and fear. The instantaneous respiratory frequency perturbation duration index was the only one capable of separating sadness from disgust. From the six ANS parameters study, different autonomic patterns were identified, each characterizing one of the six basic emotion used as inducing signals. No index alone, nor group of parameters (EDR and thermovascular

Using geometric algebra to understand pattern rotations in multiple mirror optical systems

International Nuclear Information System (INIS)

Hanlon, J.; Ziock, H.

1997-01-01

Geometric Algebra (GA) is a new formulation of Clifford Algebra that includes vector analysis without notation changes. Most applications of Ga have been in theoretical physics, but GA is also a very good analysis tool for engineering. As an example, the authors use GA to study pattern rotation in optical systems with multiple mirror reflections. The common ways to analyze pattern rotations are to use rotation matrices or optical ray trace codes, but these are often inconvenient. The authors use GA to develop a simple expression for pattern rotation that is useful for designing or tolerancing pattern rotations in a multiple mirror optical system by inspection. Pattern rotation is used in many optical engineering systems, but it is not normally covered in optical system engineering texts. Pattern rotation is important in optical systems such as: (1) the 192 beam National ignition Facility (NIF), which uses square laser beams in close packed arrays to cut costs; (2) visual optical systems, which use pattern rotation to present the image to the observer in the appropriate orientation, and (3) the UR90 unstable ring resonator, which uses pattern rotation to fill a rectangular laser gain region and provide a filled-in laser output beam

Patterns induced by super cross-diffusion in a predator-prey system with Michaelis-Menten type harvesting.

Science.gov (United States)

Liu, Biao; Wu, Ranchao; Chen, Liping

2018-04-01

Turing instability and pattern formation in a super cross-diffusion predator-prey system with Michaelis-Menten type predator harvesting are investigated. Stability of equilibrium points is first explored with or without super cross-diffusion. It is found that cross-diffusion could induce instability of equilibria. To further derive the conditions of Turing instability, the linear stability analysis is carried out. From theoretical analysis, note that cross-diffusion is the key mechanism for the formation of spatial patterns. By taking cross-diffusion rate as bifurcation parameter, we derive amplitude equations near the Turing bifurcation point for the excited modes by means of weakly nonlinear theory. Dynamical analysis of the amplitude equations interprets the structural transitions and stability of various forms of Turing patterns. Furthermore, the theoretical results are illustrated via numerical simulations. Copyright © 2018. Published by Elsevier Inc.

Analysis of Architecture Pattern Usage in Legacy System Architecture Documentation

NARCIS (Netherlands)

Harrison, Neil B.; Avgeriou, Paris

2008-01-01

Architecture patterns are an important tool in architectural design. However, while many architecture patterns have been identified, there is little in-depth understanding of their actual use in software architectures. For instance, there is no overview of how many patterns are used per system or

Pattern-oriented modelling: a ‘multi-scope’ for predictive systems ecology

Science.gov (United States)

Grimm, Volker; Railsback, Steven F.

2012-01-01

Modern ecology recognizes that modelling systems across scales and at multiple levels—especially to link population and ecosystem dynamics to individual adaptive behaviour—is essential for making the science predictive. ‘Pattern-oriented modelling’ (POM) is a strategy for doing just this. POM is the multi-criteria design, selection and calibration of models of complex systems. POM starts with identifying a set of patterns observed at multiple scales and levels that characterize a system with respect to the particular problem being modelled; a model from which the patterns emerge should contain the right mechanisms to address the problem. These patterns are then used to (i) determine what scales, entities, variables and processes the model needs, (ii) test and select submodels to represent key low-level processes such as adaptive behaviour, and (iii) find useful parameter values during calibration. Patterns are already often used in these ways, but a mini-review of applications of POM confirms that making the selection and use of patterns more explicit and rigorous can facilitate the development of models with the right level of complexity to understand ecological systems and predict their response to novel conditions. PMID:22144392

Beam-Forming Concentrating Solar Thermal Array Power Systems

Science.gov (United States)

Cwik, Thomas A. (Inventor); Dimotakis, Paul E. (Inventor); Hoppe, Daniel J. (Inventor)

2016-01-01

The present invention relates to concentrating solar-power systems and, more particularly, beam-forming concentrating solar thermal array power systems. A solar thermal array power system is provided, including a plurality of solar concentrators arranged in pods. Each solar concentrator includes a solar collector, one or more beam-forming elements, and one or more beam-steering elements. The solar collector is dimensioned to collect and divert incoming rays of sunlight. The beam-forming elements intercept the diverted rays of sunlight, and are shaped to concentrate the rays of sunlight into a beam. The steering elements are shaped, dimensioned, positioned, and/or oriented to deflect the beam toward a beam output path. The beams from the concentrators are converted to heat at a receiver, and the heat may be temporarily stored or directly used to generate electricity.

A review and guidance for pattern selection in spatiotemporal system

Science.gov (United States)

Wang, Chunni; Ma, Jun

2018-03-01

Pattern estimation and selection in media can give important clues to understand the collective response to external stimulus by detecting the observable variables. Both reaction-diffusion systems (RDs) and neuronal networks can be treated as multi-agent systems from molecular level, intrinsic cooperation, competition. An external stimulus or attack can cause collapse of spatial order and distribution, while appropriate noise can enhance the consensus in the spatiotemporal systems. Pattern formation and synchronization stability can bridge isolated oscillators and the network by coupling these nodes with appropriate connection types. As a result, the dynamical behaviors can be detected and discussed by developing different spatial patterns and realizing network synchronization. Indeed, the collective response of network and multi-agent system depends on the local kinetics of nodes and cells. It is better to know the standard bifurcation analysis and stability control schemes before dealing with network problems. In this review, dynamics discussion and synchronization control on low-dimensional systems, pattern formation and synchronization stability on network, wave stability in RDs and neuronal network are summarized. Finally, possible guidance is presented when some physical effects such as polarization field and electromagnetic induction are considered.

Pattern formations in chaotic spatio-temporal systems

Indian Academy of Sciences (India)

5Beijing–Hong Kong–Singapore Joint Center of Nonlinear and Complex Systems, ... For theoretical studies most previous work has focused on pattern .... Lyapunov exponents from arbitrary initial conditions, and the plots look rather.

Cutting blade dentitions in squaliform sharks form by modification of inherited alternate tooth ordering patterns

OpenAIRE

Underwood, Charlie J.; Johanson, Z.; Smith, M.M.

2016-01-01

The squaliform sharks represent one of the most speciose shark clades. Many adult squaliforms have blade-like teeth, either on both jaws or restricted to the lower jaw, forming a continuous, serrated blade along the jaw margin. These teeth are replaced as a single unit and successor teeth lack the alternate arrangement present in other elasmobranchs. Micro-CT scans of embryos of squaliforms and a related outgroup (Pristiophoridae) revealed that the squaliform dentition pattern represents a hi...

The 2014 International Society of Urological Pathology (ISUP) Consensus Conference on Gleason Grading of Prostatic Carcinoma: Definition of Grading Patterns and Proposal for a New Grading System.

Science.gov (United States)

Epstein, Jonathan I; Egevad, Lars; Amin, Mahul B; Delahunt, Brett; Srigley, John R; Humphrey, Peter A

2016-02-01

In November, 2014, 65 prostate cancer pathology experts, along with 17 clinicians including urologists, radiation oncologists, and medical oncologists from 19 different countries gathered in a consensus conference to update the grading of prostate cancer, last revised in 2005. The major conclusions were: (1) Cribriform glands should be assigned a Gleason pattern 4, regardless of morphology; (2) Glomeruloid glands should be assigned a Gleason pattern 4, regardless of morphology; (3) Grading of mucinous carcinoma of the prostate should be based on its underlying growth pattern rather than grading them all as pattern 4; and (4) Intraductal carcinoma of the prostate without invasive carcinoma should not be assigned a Gleason grade and a comment as to its invariable association with aggressive prostate cancer should be made. Regarding morphologies of Gleason patterns, there was clear consensus on: (1) Gleason pattern 4 includes cribriform, fused, and poorly formed glands; (2) The term hypernephromatoid cancer should not be used; (3) For a diagnosis of Gleason pattern 4, it needs to be seen at 10x lens magnification; (4) Occasional/seemingly poorly formed or fused glands between well-formed glands is insufficient for a diagnosis of pattern 4; (5) In cases with borderline morphology between Gleason pattern 3 and pattern 4 and crush artifacts, the lower grade should be favored; (6) Branched glands are allowed in Gleason pattern 3; (7) Small solid cylinders represent Gleason pattern 5; (8) Solid medium to large nests with rosette-like spaces should be considered to represent Gleason pattern 5; and (9) Presence of unequivocal comedonecrosis, even if focal is indicative of Gleason pattern 5. It was recognized by both pathologists and clinicians that despite the above changes, there were deficiencies with the Gleason system. The Gleason grading system ranges from 2 to 10, yet 6 is the lowest score currently assigned. When patients are told that they have a Gleason score 6 out

Clonal Selection Based Artificial Immune System for Generalized Pattern Recognition

Science.gov (United States)

Huntsberger, Terry

2011-01-01

The last two decades has seen a rapid increase in the application of AIS (Artificial Immune Systems) modeled after the human immune system to a wide range of areas including network intrusion detection, job shop scheduling, classification, pattern recognition, and robot control. JPL (Jet Propulsion Laboratory) has developed an integrated pattern recognition/classification system called AISLE (Artificial Immune System for Learning and Exploration) based on biologically inspired models of B-cell dynamics in the immune system. When used for unsupervised or supervised classification, the method scales linearly with the number of dimensions, has performance that is relatively independent of the total size of the dataset, and has been shown to perform as well as traditional clustering methods. When used for pattern recognition, the method efficiently isolates the appropriate matches in the data set. The paper presents the underlying structure of AISLE and the results from a number of experimental studies.

A survey on pattern formation of autonomous mobile robots: asynchrony, obliviousness and visibility

International Nuclear Information System (INIS)

Yamauchi, Yukiko

2013-01-01

A robot system consists of autonomous mobile robots each of which repeats Look-Compute-Move cycles, where the robot observes the positions of other robots (Look phase), computes the track to the next location (Compute phase), and moves along the track (Move phase). In this survey, we focus on self-organization of mobile robots, especially their power of forming patterns. The formation power of a robot system is the class of patterns that the robots can form, and existing results show that the robot system's formation power is determined by their asynchrony, obliviousness, and visibility. We briefly survey existing results, with impossibilities and pattern formation algorithms. Finally, we present several open problems related to the pattern formation problem of mobile robots

Glass Forming Ability in Systems with Competing Orderings

Science.gov (United States)

Russo, John; Romano, Flavio; Tanaka, Hajime

2018-04-01

Some liquids, if cooled rapidly enough to avoid crystallization, can be frozen into a nonergodic glassy state. The tendency for a material to form a glass when quenched is called "glass-forming ability," and it is of key significance both fundamentally and for materials science applications. Here, we consider liquids with competing orderings, where an increase in the glass-forming ability is signaled by a depression of the melting temperature towards its minimum at triple or eutectic points. With simulations of two model systems where glass-forming ability can be tuned by an external parameter, we are able to interpolate between crystal-forming and glass-forming behavior. We find that the enhancement of the glass-forming ability is caused by an increase in the structural difference between liquid and crystal: stronger competition in orderings towards the melting point minimum makes a liquid structure more disordered (more complex). This increase in the liquid-crystal structure difference can be described by a single adimensional parameter, i.e., the interface energy cost scaled by the thermal energy, which we call the "thermodynamic interface penalty." Our finding may provide a general physical principle for not only controlling the glass-forming ability but also the emergence of glassy behavior of various systems with competing orderings, including orderings of structural, magnetic, electronic, charge, and dipolar origin.

An optoelectronic system for fringe pattern analysis

Science.gov (United States)

Sciammarella, C. A.; Ahmadshahi, M.

A system capable of retrieving and processing information recorded in fringe patterns is reported. The principal components are described as well as the architecture in which they are assembled. An example of application is given.

The Influence of Gene Expression Time Delays on Gierer–Meinhardt Pattern Formation Systems

KAUST Repository

Seirin Lee, S.

2010-03-23

There are numerous examples of morphogen gradients controlling long range signalling in developmental and cellular systems. The prospect of two such interacting morphogens instigating long range self-organisation in biological systems via a Turing bifurcation has been explored, postulated, or implicated in the context of numerous developmental processes. However, modelling investigations of cellular systems typically neglect the influence of gene expression on such dynamics, even though transcription and translation are observed to be important in morphogenetic systems. In particular, the influence of gene expression on a large class of Turing bifurcation models, namely those with pure kinetics such as the Gierer-Meinhardt system, is unexplored. Our investigations demonstrate that the behaviour of the Gierer-Meinhardt model profoundly changes on the inclusion of gene expression dynamics and is sensitive to the sub-cellular details of gene expression. Features such as concentration blow up, morphogen oscillations and radical sensitivities to the duration of gene expression are observed and, at best, severely restrict the possible parameter spaces for feasible biological behaviour. These results also indicate that the behaviour of Turing pattern formation systems on the inclusion of gene expression time delays may provide a means of distinguishing between possible forms of interaction kinetics. Finally, this study also emphasises that sub-cellular and gene expression dynamics should not be simply neglected in models of long range biological pattern formation via morphogens. © 2010 Society for Mathematical Biology.

Mandibulary dental arch form differences between level four polynomial method and pentamorphic pattern for normal occlusion sample

Directory of Open Access Journals (Sweden)

Y. Yuliana

2011-07-01

Full Text Available The aim of an orthodontic treatment is to achieve aesthetic, dental health and the surrounding tissues, occlusal functional relationship, and stability. The success of an orthodontic treatment is influenced by many factors, such as diagnosis and treatment plan. In order to do a diagnosis and a treatment plan, medical record, clinical examination, radiographic examination, extra oral and intra oral photos, as well as study model analysis are needed. The purpose of this study was to evaluate the differences in dental arch form between level four polynomial and pentamorphic arch form and to determine which one is best suitable for normal occlusion sample. This analytic comparative study was conducted at Faculty of Dentistry Universitas Padjadjaran on 13 models by comparing the dental arch form using the level four polynomial method based on mathematical calculations, the pattern of the pentamorphic arch and mandibular normal occlusion as a control. The results obtained were tested using statistical analysis T student test. The results indicate a significant difference both in the form of level four polynomial method and pentamorphic arch form when compared with mandibular normal occlusion dental arch form. Level four polynomial fits better, compare to pentamorphic arch form.

Web 2.0 systems supporting childhood chronic disease management: a pattern language representation of a general architecture.

Science.gov (United States)

Timpka, Toomas; Eriksson, Henrik; Ludvigsson, Johnny; Ekberg, Joakim; Nordfeldt, Sam; Hanberger, Lena

2008-11-28

Chronic disease management is a global health concern. By the time they reach adolescence, 10-15% of all children live with a chronic disease. The role of educational interventions in facilitating adaptation to chronic disease is receiving growing recognition, and current care policies advocate greater involvement of patients in self-care. Web 2.0 is an umbrella term for new collaborative Internet services characterized by user participation in developing and managing content. Key elements include Really Simple Syndication (RSS) to rapidly disseminate awareness of new information; weblogs (blogs) to describe new trends, wikis to share knowledge, and podcasts to make information available on personal media players. This study addresses the potential to develop Web 2.0 services for young persons with a chronic disease. It is acknowledged that the management of childhood chronic disease is based on interplay between initiatives and resources on the part of patients, relatives, and health care professionals, and where the balance shifts over time to the patients and their families. Participatory action research was used to stepwise define a design specification in the form of a pattern language. Support for children diagnosed with diabetes Type 1 was used as the example area. Each individual design pattern was determined graphically using card sorting methods, and textually in the form Title, Context, Problem, Solution, Examples and References. Application references were included at the lowest level in the graphical overview in the pattern language but not specified in detail in the textual descriptions. The design patterns are divided into functional and non-functional design elements, and formulated at the levels of organizational, system, and application design. The design elements specify access to materials for development of the competences needed for chronic disease management in specific community settings, endorsement of self-learning through online peer

Web 2.0 systems supporting childhood chronic disease management: A pattern language representation of a general architecture

Directory of Open Access Journals (Sweden)

Ekberg Joakim

2008-11-01

Full Text Available Abstract Background Chronic disease management is a global health concern. By the time they reach adolescence, 10–15% of all children live with a chronic disease. The role of educational interventions in facilitating adaptation to chronic disease is receiving growing recognition, and current care policies advocate greater involvement of patients in self-care. Web 2.0 is an umbrella term for new collaborative Internet services characterized by user participation in developing and managing content. Key elements include Really Simple Syndication (RSS to rapidly disseminate awareness of new information; weblogs (blogs to describe new trends, wikis to share knowledge, and podcasts to make information available on personal media players. This study addresses the potential to develop Web 2.0 services for young persons with a chronic disease. It is acknowledged that the management of childhood chronic disease is based on interplay between initiatives and resources on the part of patients, relatives, and health care professionals, and where the balance shifts over time to the patients and their families. Methods Participatory action research was used to stepwise define a design specification in the form of a pattern language. Support for children diagnosed with diabetes Type 1 was used as the example area. Each individual design pattern was determined graphically using card sorting methods, and textually in the form Title, Context, Problem, Solution, Examples and References. Application references were included at the lowest level in the graphical overview in the pattern language but not specified in detail in the textual descriptions. Results The design patterns are divided into functional and non-functional design elements, and formulated at the levels of organizational, system, and application design. The design elements specify access to materials for development of the competences needed for chronic disease management in specific community

Film forming systems for topical and transdermal drug delivery

Directory of Open Access Journals (Sweden)

Kashmira Kathe

2017-11-01

Full Text Available Skin is considered as an important route of administration of drugs for both local and systemic effects. The effectiveness of topical therapy depends on the physicochemical properties of the drug and adherence of the patient to the treatment regimen as well as the system's ability to adhere to skin during the therapy so as to promote drug penetration through the skin barrier. Conventional formulations for topical and dermatological administration of drugs have certain limitations like poor adherence to skin, poor permeability and compromised patient compliance. For the treatment of diseases of body tissues and wounds, the drug has to be maintained at the site of treatment for an effective period of time. Topical film forming systems are such developing drug delivery systems meant for topical application to the skin, which adhere to the body, forming a thin transparent film and provide delivery of the active ingredients to the body tissue. These are intended for skin application as emollient or protective and for local action or transdermal penetration of medicament for systemic action. The transparency is an appreciable feature of this polymeric system which greatly influences the patient acceptance. In the current discussion, the film forming systems are described as a promising choice for topical and transdermal drug delivery. Further the various types of film forming systems (sprays/solutions, gels and emulsions along with their evaluation parameters have also been reviewed.

Urban expansion and transportation : the impact of urban form on commuting patterns on the city fringe of Beijing

NARCIS (Netherlands)

Zhao, Pengjun; Lue, Bin; de Roo, Gert

2010-01-01

A key issue in the development of China's growing megacities in the transport-related environmental costs due to rapid urban expansion. In light of this issue, the authors examine the impact of urban form on commuting patterns on the city fringe of Beijing. Based on household-survey data, the

Stripe patterns in a model for block polymers

NARCIS (Netherlands)

Peletier, M.A.; Veneroni, M.

2009-01-01

We consider a pattern-forming system in two space dimensions defined by an energy Ge. The functional Ge models strong phase separation in AB diblock copolymer melts, and patterns are represented by {0, 1}-valued functions; the values 0 and 1 correspond to the A and B phases. The parameter e is the

Stripe patterns in a model for block polymers

NARCIS (Netherlands)

Peletier, M.A.; Veneroni, M.

2010-01-01

We consider a pattern-forming system in two space dimensions defined by an energy Ge. The functional Ge models strong phase separation in AB diblock copolymer melts, and patterns are represented by {0, 1}-valued functions; the values 0 and 1 correspond to the A and B phases. The parameter e is the

Multiphase patterns in periodically forced oscillatory systems

International Nuclear Information System (INIS)

Elphick, C.; Hagberg, A.; Meron, E.

1999-01-01

Periodic forcing of an oscillatory system produces frequency locking bands within which the system frequency is rationally related to the forcing frequency. We study extended oscillatory systems that respond to uniform periodic forcing at one quarter of the forcing frequency (the 4:1 resonance). These systems possess four coexisting stable states, corresponding to uniform oscillations with successive phase shifts of π/2. Using an amplitude equation approach near a Hopf bifurcation to uniform oscillations, we study front solutions connecting different phase states. These solutions divide into two groups: π fronts separating states with a phase shift of π and π/2 fronts separating states with a phase shift of π/2. We find a type of front instability where a stationary π front 'decomposes' into a pair of traveling π/2 fronts as the forcing strength is decreased. The instability is degenerate for an amplitude equation with cubic nonlinearities. At the instability point a continuous family of pair solutions exists, consisting of π/2 fronts separated by distances ranging from zero to infinity. Quintic nonlinearities lift the degeneracy at the instability point but do not change the basic nature of the instability. We conjecture the existence of similar instabilities in higher 2n:1 resonances (n=3,4,hor-ellipsis) where stationary π fronts decompose into n traveling π/n fronts. The instabilities designate transitions from stationary two-phase patterns to traveling 2n-phase patterns. As an example, we demonstrate with a numerical solution the collapse of a four-phase spiral wave into a stationary two-phase pattern as the forcing strength within the 4:1 resonance is increased. copyright 1999 The American Physical Society

Emergent rotational symmetries in disordered magnetic domain patterns.

Science.gov (United States)

Su, Run; Seu, Keoki A; Parks, Daniel; Kan, Jimmy J; Fullerton, Eric E; Roy, Sujoy; Kevan, Stephen D

2011-12-16

Uniaxial systems often form labyrinthine domains that exhibit short-range order but are macroscopically isotropic and would not be expected to exhibit precise symmetries. However, their underlying frustration results in a multitude of metastable configurations of comparable energy, and driving such a system externally might lead to pattern formation. We find that soft x-ray speckle diffraction patterns of the labyrinthine domains in CoPd/IrMn heterostructures reveal a diverse array of hidden rotational symmetries about the magnetization axis, thereby suggesting an unusual form of emergent order in an otherwise disordered system. These symmetries depend on applied magnetic field, magnetization history, and scattering wave vector. Maps of rotational symmetry exhibit intriguing structures that can be controlled by manipulating the applied magnetic field in concert with the exchange bias condition. © 2011 American Physical Society

Selective laser pyrolysis of metallo-organics as a method of forming patterned thin film superconductors

International Nuclear Information System (INIS)

Mantese, J.V.; Catalan, A.B.; Sell, J.A.; Meyer, M.S.; Mance, A.M.

1990-01-01

This patent describes a method for forming patterned films of superconductive materials forming a solution from the neodecanoates of yttrium, barium and copper. The neodecanoates forming an oxide mixture exhibiting superconductive properties upon subsequent thermal decompositions wherein the oxide mixture is characterized by a ratio of yttrium:barium:copper of approximately 1:2:4, the solution comprising an organic solvent such as xylene; adding to the solution an appropriate dye, depositing a film of the solution having the dye onto a strontium titanate substrate; exposing selective regions of the film with an Argon laser emitting the wavelength of light, such that the exposed regions of the film become insoluble in the xylene; immersing the film into the xylene so that the soluble; unexposed regions of the film are removed from the substrate; heating the film to thermally decompose the neodecanoates into a film containing yttrium, barium and copper oxides; to promote recrystallization and grain growth of the metal oxides within the film and induce a change therein by which the film exhibits superconducting properties

Study of the liquid-film-forming apparatus as an alternative aeration system: design criteria and operating condition.

Science.gov (United States)

Hongprasith, Narapong; Imai, Tsuyoshi; Painmanakul, Pisut

2017-06-01

Aeration is an important factor in aquaculture systems because it is a vital condition for all organisms that live in water and respire aerobically. Generally, mechanical surface aerators are widely used in Thailand due to their advantage for increasing dissolved oxygen (DO) and for their horizontal mixing of aquaculture ponds with large surface areas. However, these systems still have some drawbacks, primarily the low oxygen transfer efficiency (OTE) and energy. Regarding this issue, alternative aeration systems should be studied and applied. Therefore, this research aims to study the aeration mechanism obtained by the diffused-air aeration combined with a liquid-film-forming apparatus (LFFA). The effect of gas flow rates, types, and patterns of aerator installation were investigated in an aquaculture pond of 10 m × 10 m × 1.5 m. The analytical parameters were volumetric mass transfer coefficient (k L a), OTE, and aeration efficiency (AE). From the results, the '4-D' with partitions was proposed as the suitable pattern for the LFFA installation. The advantage could be obtained from high energy performance with 1.2 kg/kW h of AE. Then, the operation conditions can be applied as a design guideline for this alternative aeration system in the aquaculture ponds.

Spatio-temporal patterns in simple models of marine systems

Science.gov (United States)

Feudel, U.; Baurmann, M.; Gross, T.

2009-04-01

Spatio-temporal patterns in marine systems are a result of the interaction of population dynamics with physical transport processes. These physical transport processes can be either diffusion processes in marine sediments or in the water column. We study the dynamics of one population of bacteria and its nutrient in in a simplified model of a marine sediments, taking into account that the considered bacteria possess an active as well as an inactive state, where activation is processed by signal molecules. Furthermore the nutrients are transported actively by bioirrigation and passively by diffusion. It is shown that under certain conditions Turing patterns can occur which yield heterogeneous spatial patterns of the species. The influence of bioirrigation on Turing patterns leads to the emergence of ''hot spots``, i.e. localized regions of enhanced bacterial activity. All obtained patterns fit quite well to observed patterns in laboratory experiments. Spatio-temporal patterns appear in a predator-prey model, used to describe plankton dynamics. These patterns appear due to the simultaneous emergence of Turing patterns and oscillations in the species abundance in the neighborhood of a Turing-Hopf bifurcation. We observe a large variety of different patterns where i) stationary heterogeneous patterns (e.g. hot and cold spots) compete with spatio-temporal patterns ii) slowly moving patterns are embedded in an oscillatory background iii) moving fronts and spiral waves appear.

The Textile Form of Sound

DEFF Research Database (Denmark)

Bendixen, Cecilie

Sound is a part of architecture, and sound is complex. Upon this, sound is invisible. How is it then possible to design visual objects that interact with the sound? This paper addresses the problem of how to get access to the complexity of sound and how to make textile material revealing the form...... goemetry by analysing the sound pattern at a specific spot. This analysis is done theoretically with algorithmic systems and practical with waves in water. The paper describes the experiments and the findings, and explains how an analysis of sound can be catched in a textile form....

Demonstration of electronic pattern switching and 10x pattern demagnification in a maskless micro-ion beam reduction lithography system

International Nuclear Information System (INIS)

Ngo, V.V.; Akker, B.; Leung, K.N.; Noh, I.; Scott, K.L.; Wilde, S.

2002-01-01

A proof-of-principle ion projection lithography (IPL) system called Maskless Micro-ion beam Reduction Lithography (MMRL) has been developed and tested at the Lawrence Berkeley National Laboratory (LBNL) for future integrated circuits (ICs) manufacturing and thin film media patterning [1]. This MMRL system is aimed at completely eliminating the first stage of the conventional IPL system [2] that contains the complicated beam optics design in front of the stencil mask and the mask itself. It consists of a multicusp RF plasma generator, a multi-beamlet pattern generator, and an all-electrostatic ion optical column. Results from ion beam exposures on PMMA and Shipley UVII-HS resists using 75 keV H+ are presented in this paper. Proof-of-principle electronic pattern switching together with 10x reduction ion optics (using a pattern generator made of nine 50-(micro)m switchable apertures) has been performed and is reported in this paper. In addition, the fabrication of a micro-fabricated pattern generator [3] on an SOI membrane is also presented

How to Diagnose and Classify Tattoo Complications in the Clinic: A System of Distinctive Patterns.

Science.gov (United States)

Serup, Jørgen

2017-01-01

Tattoo complications represent a broad spectrum of clinical entities and disease mechanisms. Infections are known, but chronic inflammatory reactions have hitherto been inconsistently reported and given many interpretations and terms. A clinical classification system of distinct patterns with emphasis on inflammatory tattoo reactions is introduced. Allergic reactions prevalent in red tattoos and often associated with azo pigments are manifested as the 'plaque elevation', 'excessive hyperkeratosis', and 'ulceronecrotic' patterns. The allergen is a hapten. Nonallergic reactions prevalent in black tattoos and associated with carbon black are manifested as the 'papulonodular' pattern. Carbon black nanoparticles agglomerate in the dermis over time forming foreign bodies that elicit reactions. Many black tattoos even develop sarcoid granuloma, and the 'papulonodular' pattern is strongly associated with sarcoidosis affecting other organs. Tattoo complications include a large group of less frequent but nevertheless specific entities, i.e. irritant and toxic local events, photosensitivity, urticaria, eczematous rash due to soluble allergen, neurosensitivity and pain syndrome, lymphopathies, pigment diffusion or fan, scars, and other sequels of tattooing or tattoo removal. Keratoacanthoma occurs in tattoos. Carcinoma and melanoma are rare and occur by coincidence only. Different tattoo complications require different therapeutic approaches, and precise diagnosis is thus important as a key to therapy. The proposed new classification with characteristic patterns relies on simple tools, namely patient history, objective findings, and supplementary punch biopsy. By virtue of simplicity and broad access, these methods make the proposed classification widely applicable in clinics and hospitals. The system is reported to the 11th revision of the WHO diagnosis classification used as international standard. © 2017 S. Karger AG, Basel.

On Noether symmetries and form invariance of mechanico-electrical systems

International Nuclear Information System (INIS)

Fu Jingli; Chen Liqun

2004-01-01

This Letter focuses on form invariance and Noether symmetries of mechanico-electrical systems. Based on the invariance of Hamiltonian actions for mechanico-electrical systems under the infinitesimal transformation of the coordinates, the electric quantities and the time, the authors present the Noether symmetry transformation, the Noether quasi-symmetry transformation, the generalized Noether quasi-symmetry transformation and the general Killing equations of Lagrange mechanico-electrical systems and Lagrange-Maxwell mechanico-electrical systems. Using the invariance of the differential equations, satisfied by physical quantities, such as Lagrangian, non-potential general forces, under the infinitesimal transformation, the authors propose the definition and criterions of the form invariance for mechanico-electrical systems. The Letter also demonstrates connection between the Noether symmetries and the form invariance of mechanico-electrical systems. An example is designed to illustrate these results

The Reification of Patterns in the Design of Description-Driven Systems

CERN Document Server

Le Goff, J M; Kovács, Z; McClatchey, R

2001-01-01

To address the issues of reusability and evolvability in designing self- describing systems, this paper proposes a pattern-based, object-oriented, description-driven system architecture. The proposed architecture embodies four pillars - first, the adoption of a multi-layered meta-modeling architecture and reflective meta-level architecture, second, the identification of four data modeling relationships that must be made explicit such that they can be examined and modified dynamically, third, the identification of five design patterns which have emerged from practice and have proved essential in providing reusable building blocks for data management, and fourth, the encoding of the structural properties of the five design patterns by means of one pattern, the Graph pattern. The CRISTAL research project served as the basis onto which the pattern-based meta-object approach has been applied. The proposed architecture allows the realization of reusability and adaptability, and is fundamental in the specification o...

The principles of the pattern recognition of skeletal structures

International Nuclear Information System (INIS)

Motto, J.A.

2006-01-01

Request of the skeletal system form a lage proportion of plain film radiographic examinations. A sound knowledge of normal radiographic appearances is vital if abnormal patterns are to be recognized.The ABCS, SPACED and SASNOES methods of applying pattern recognition to plain radiographers of bones and joints will be presented in an attempt to make pattern recognition and offer an opinion constitutes role extension of radiographers

Normal form of linear systems depending on parameters

International Nuclear Information System (INIS)

Nguyen Huynh Phan.

1995-12-01

In this paper we resolve completely the problem to find normal forms of linear systems depending on parameters for the feedback action that we have studied for the special case of controllable linear systems. (author). 24 refs

Within-twig leaf distribution patterns differ among plant life-forms in a subtropical Chinese forest.

Science.gov (United States)

Meng, Fengqun; Cao, Rui; Yang, Dongmei; Niklas, Karl J; Sun, Shucun

2013-07-01

Amax) had more even leaf distribution patterns than evergreen species (which had low LCP, LSP and Amax); shade-adapted evergreen species had more even leaf distribution patterns than sun-adapted evergreen species. We propose that the leaf distribution pattern (i.e., 'evenness' CV, which is an easily measured functional trait) can be used to distinguish among life-forms in communities similar to the one examined in this study.

Computational study of patterns in simple nonequilibrium systems

International Nuclear Information System (INIS)

Barach, J.P.

1997-01-01

We present computational studies of a two component reaction diffusion system of the Grey and Scott type. The calculation involves a discrete treatment of the diffusion equation and some details of that problem are explained. As the simulation calculation runs over a 200x200 square spatial field ridge like patterns develop if one diffusion coefficient is about twice the size of the other and if the rate parameters are in a narrow range. Pattern development is faster when the reaction rates are larger, within this range. It is shown that for an advancing wave, the lead component has a wider front than the other although in steady state the two components obey a ridge/valley or valley/ridge equilibrium. We investigate ways in which a more complex time dependence could be introduced to the system and display one example of such a possible expansion of the study. A correlation coefficient study shows a modest but distinct difference between our pattern development and a random field. copyright 1997 American Institute of Physics

A novel approach to describing and detecting performance anti-patterns

Science.gov (United States)

Sheng, Jinfang; Wang, Yihan; Hu, Peipei; Wang, Bin

2017-08-01

Anti-pattern, as an extension to pattern, describes a widely used poor solution which can bring negative influence to application systems. Aiming at the shortcomings of the existing anti-pattern descriptions, an anti-pattern description method based on first order predicate is proposed. This method synthesizes anti-pattern forms and symptoms, which makes the description more accurate and has good scalability and versatility as well. In order to improve the accuracy of anti-pattern detection, a Bayesian classification method is applied in validation for detection results, which can reduce false negatives and false positives of anti-pattern detection. Finally, the proposed approach in this paper is applied to a small e-commerce system, the feasibility and effectiveness of the approach is demonstrated further through experiments.

Patterns and Interfaces in Dissipative Dynamics

CERN Document Server

Pismen, L.M

2006-01-01

Spontaneous pattern formation in nonlinear dissipative systems far from equilibrium is a paradigmatic case of emergent behaviour associated with complex systems. It is encountered in a great variety of settings, both in nature and technology, and has numerous applications ranging from nonlinear optics through solid and fluid mechanics, physical chemistry and chemical engineering to biology. Nature creates its variety of forms through spontaneous pattern formation and self-assembly, and this strategy is likely to be imitated by future biomorphic technologies. This book is a first-hand account by one of the leading players in this field, which gives in-depth descriptions of analytical methods elucidating the complex evolution of nonlinear dissipative systems, and brings the reader to the forefront of current research. The introductory chapter on the theory of dynamical systems is written with a view to applications of its powerful methods to spatial and spatio-temporal patterns. It is followed by two chapters t...

Ventilation patterns of the songbird lung/air sac system during different behaviors.

Science.gov (United States)

Mackelprang, Rebecca; Goller, Franz

2013-10-01

Unidirectional, continuous airflow through the avian lung is achieved through an elaborate air sac system with a sequential, posterior to anterior ventilation pattern. This classical model was established through various approaches spanning passively ventilated systems to mass spectrometry analysis of tracer gas flow into various air sacs during spontaneous breathing in restrained ducks. Information on flow patterns in other bird taxa is missing, and these techniques do not permit direct tests of whether the basic flow pattern can change during different behaviors. Here we use thermistors implanted into various locations of the respiratory system to detect small pulses of tracer gas (helium) to reconstruct airflow patterns in quietly breathing and behaving (calling, wing flapping) songbirds (zebra finch and yellow-headed blackbird). The results illustrate that the basic pattern of airflow in these two species is largely consistent with the model. However, two notable differences emerged. First, some tracer gas arrived in the anterior set of air sacs during the inspiration during which it was inhaled, suggesting a more rapid throughput through the lung than previously assumed. Second, differences in ventilation between the two anterior air sacs emerged during calling and wing flapping, indicating that adjustments in the flow pattern occur during dynamic behaviors. It is unclear whether this modulation in ventilation pattern is passive or active. This technique for studying ventilation patterns during dynamic behaviors proves useful for establishing detailed timing of airflow and modulation of ventilation in the avian respiratory system.

Mobile based optical form evaluation system

Directory of Open Access Journals (Sweden)

Asım Sinan YÜKSEL

2016-05-01

Full Text Available Optical forms that contain multiple-choice answers are widely used both for electing students and evaluating student achievements in education systems in our country and worldwide. Optical forms are evaluated by employing optical mark recognition techniques through optical readers. High cost of these machines, limited access to them, long waiting time for evaluation results make the process hard for educationists working in cities or countries. In this study, a mobile application was developed for the educationists who own mobile phones or tablets for the purpose of evaluating students' answer sheets quickly and independent of location and optical readers. Optical form recognition, reading and evaluation processes are done on the image of student's answer sheet that is taken with the mobile phone or tablet of educationist. The Android based mobile application that we developed has a user-friendly interface, high success rate and is the first of our knowledge application that operates on mobile platforms in this field.

Modeling and analyzing stripe patterns in fish skin

Science.gov (United States)

Zheng, Yibo; Zhang, Lei; Wang, Yuan; Liang, Ping; Kang, Junjian

2009-11-01

The formation mechanism of stripe patterns in the skin of tropical fishes has been investigated by a coupled two variable reaction diffusion model. Two types of spatial inhomogeneities have been introduced into a homogenous system. Several Turing modes pumped by the Turing instability give rise to a simple stripe pattern. It is found that the Turing mechanism can only determine the wavelength of stripe pattern. The orientation of stripe pattern is determined by the spatial inhomogeneity. Our numerical results suggest that it may be the most possible mechanism for the forming process of fish skin patterns.

Pattern formation and self-organization in a simple precipitation system

NARCIS (Netherlands)

Volford, Andras; Izsak, F.; Ripzam, Matyas; Lagzi, Istvan

Various types of pattern formation and self-organization phenomena can be observed in biological, chemical, and geochemical systems due to the interaction of reaction with diffusion. The appearance of static precipitation patterns was reported first by Liesegang in 1896. Traveling waves and

Pattern formation induced by cross-diffusion in a predator–prey system

International Nuclear Information System (INIS)

Sun Guiquan; Jin Zhen; Liu Quanxing; Li Li

2008-01-01

This paper considers the Holling–Tanner model for predator–prey with self and cross-diffusion. From the Turing theory, it is believed that there is no Turing pattern formation for the equal self-diffusion coefficients. However, combined with cross-diffusion, it shows that the system will exhibit spotted pattern by both mathematical analysis and numerical simulations. Furthermore, asynchrony of the predator and the prey in the space. The obtained results show that cross-diffusion plays an important role on the pattern formation of the predator–prey system. (general)

A Pattern Construction Scheme for Neural Network-Based Cognitive Communication

Directory of Open Access Journals (Sweden)

Ozgur Orcay

2011-01-01

Full Text Available Inefficient utilization of the frequency spectrum due to conventional regulatory limitations and physical performance limiting factors, mainly the Signal to Noise Ratio (SNR, are prominent restrictions in digital wireless communication. Pattern Based Communication System (PBCS is an adaptive and perceptual communication method based on a Cognitive Radio (CR approach. It intends an SNR oriented cognition mechanism in the physical layer for improvement of Link Spectral Efficiency (LSE. The key to this system is construction of optimal communication signals, which consist of encoded data in different pattern forms (waveforms depending on spectral availabilities. The signals distorted in the communication medium are recovered according to the pre-trained pattern glossary by the perceptual receiver. In this study, we have shown that it is possible to improve the bandwidth efficiency when largely uncorrelated signal patterns are chosen in order to form a glossary that represents symbols for different length data groups and the information can be recovered by the Artificial Neural Network (ANN in the receiver site.

Modular Neural Networks and Type-2 Fuzzy Systems for Pattern Recognition

CERN Document Server

Melin, Patricia

2012-01-01

This book describes hybrid intelligent systems using type-2 fuzzy logic and modular neural networks for pattern recognition applications. Hybrid intelligent systems combine several intelligent computing paradigms, including fuzzy logic, neural networks, and bio-inspired optimization algorithms, which can be used to produce powerful pattern recognition systems. Type-2 fuzzy logic is an extension of traditional type-1 fuzzy logic that enables managing higher levels of uncertainty in complex real world problems, which are of particular importance in the area of pattern recognition. The book is organized in three main parts, each containing a group of chapters built around a similar subject. The first part consists of chapters with the main theme of theory and design algorithms, which are basically chapters that propose new models and concepts, which are the basis for achieving intelligent pattern recognition. The second part contains chapters with the main theme of using type-2 fuzzy models and modular neural ne...

Patterns in Standards and Technologies for Economic Information Systems Interoperability

Directory of Open Access Journals (Sweden)

Vasile Irimia

2012-06-01

Full Text Available This paper presets results from a review of the current standards used for collaboration between economic information systems, including web services and service oriented architecture, EDI, ebXML framework, RosettaNet framework, cXML, xCBL UBL, BPMN, BPEL, WS-CDL, ASN.1, and others. Standards have a key role in promoting economic information system interoperability, and thus enable collaboration. Analyzing the current standards, technologies and applications used for economic information systems interoperability has revealed a common pattern that runs through all of them. From this pattern we construct a basic model of interoperability around which we relate and judge all standards, technologies and applications for economic information systems interoperability.

Short communication: Effect of the feed presentation form on the intake pattern, productive traits and rumen pH of beef cattle fed high concentrate diets

Directory of Open Access Journals (Sweden)

Antonio Gimeno

2014-10-01

Full Text Available Nutritional disorders like ruminal acidosis are common in Spanish beef production system, in which animals are fed diets with a high content in starch. This experiment studied the effect of feed presentation form (concentrate and straw offered separately, CD, or mixed in form of briquettes, BR on the pattern of intake, growth and rumen pH of beef cattle fed high concentrate diets. The experiment was performed with 40 Holstein male calves, 32 of them for determining feed intake pattern and productive rates, and the remaining 8, which were previously provided with a ruminal cannula, to monitor rumen pH in two 21-day consecutive periods following a change-over design. Animals fed BR reduced feed intake rate during the first hour after feeding (18.6 vs. 24.0% of daily intake p<0.001, but this diet promoted a lower rumen pH at all sampling times compared with CD (daily average of 5.98 vs. 6.33; p<0.001 and tended to promote a lower total feed intake (7.08 vs. 9.77 kg DM/d; p<0.001 and daily weight gain (1.43 vs. 1.76 kg/d; p=0.056. Offering the concentrate and the straw mixed in form of briquettes is not useful to prevent ruminal acidosis and improve growth, probably due to both a reduced particle size of straw and avoided self-regulation of straw intake along the day.

Smart dosimetry by pattern recognition using a single photon counting detector system in time over threshold mode

International Nuclear Information System (INIS)

Reza, S; Wong, W S; Fröjdh, E; Norlin, B; Fröjdh, C; Thungström, G; Thim, J

2012-01-01

The function of a dosimeter is to determine the absorbed dose of radiation, for those cases in which, generally, the particular type of radiation is already known. Lately, a number of applications have emerged in which all kinds of radiation are absorbed and are sorted by pattern recognition, such as the Medipix2 application in [1]. This form of smart dosimetry enables measurements where not only the total dosage is measured, but also the contributions of different types of radiation impacting upon the detector surface. Furthermore, the use of a photon counting system, where the energy deposition can be measured in each individual pixel, ensures measurements with a high degree of accuracy in relation to the pattern recognition. In this article a Timepix [2] detector system has been used in the creation of a smart dosimeter for Alpha, Beta and Gamma radiation. When a radioactive particle hits the detector surface it generates charge clusters and those impacting upon the detector surface are read out and image processing algorithms are then used to classify each charge cluster. The individual clusters are calculated and as a result, the dosage for each type of radiation is given. In some cases, several particles can impact in roughly the same place, forming overlapping clusters. In order to handle this problem, a cluster separation method has been added to the pattern recognition algorithm. When the clusters have been separated, they are classified by shape and sorted into the correct type of radiation. The algorithms and methods used in this dosimeter have been developed so as to be simple and computationally effective, in order to enable implementation on a portable device.

Environmentally Benign Tribo-systems for Metal Forming

DEFF Research Database (Denmark)

Bay, Niels; Azushima, A.; Groche, P.

2010-01-01

The growing awareness of environmental issues and the requirements to establish solutions diminishing the impact on working environment as well as external environment has initiated ever increasing efforts to develop new, environmentally benign tribological systems for metal forming. The present ...

Square Turing patterns in reaction-diffusion systems with coupled layers

Energy Technology Data Exchange (ETDEWEB)

Li, Jing [State Key Laboratory for Mesoscopic Physics and School of Physics, Peking University, Beijing 100871 (China); Wang, Hongli, E-mail: hlwang@pku.edu.cn, E-mail: qi@pku.edu.cn [State Key Laboratory for Mesoscopic Physics and School of Physics, Peking University, Beijing 100871 (China); Center for Quantitative Biology, Peking University, Beijing 100871 (China); Ouyang, Qi, E-mail: hlwang@pku.edu.cn, E-mail: qi@pku.edu.cn [State Key Laboratory for Mesoscopic Physics and School of Physics, Peking University, Beijing 100871 (China); Center for Quantitative Biology, Peking University, Beijing 100871 (China); The Peking-Tsinghua Center for Life Sciences, Beijing 100871 (China)

2014-06-15

Square Turing patterns are usually unstable in reaction-diffusion systems and are rarely observed in corresponding experiments and simulations. We report here an example of spontaneous formation of square Turing patterns with the Lengyel-Epstein model of two coupled layers. The squares are found to be a result of the resonance between two supercritical Turing modes with an appropriate ratio. Besides, the spatiotemporal resonance of Turing modes resembles to the mode-locking phenomenon. Analysis of the general amplitude equations for square patterns reveals that the fixed point corresponding to square Turing patterns is stationary when the parameters adopt appropriate values.

Morphogenesis origins of patterns and shapes

CERN Document Server

Bourgine, Paul

2010-01-01

This collective book written for the non-specialist addresses the fundamental issue of the emergence of forms and patterns in physical and living systems. Relying on the seminal works of D’Arcy Thompson, Alan Turing and René Thom, it confronts major examples.

An experimental study on two-phase flow pattern in low pressure natural circulation system

International Nuclear Information System (INIS)

Wu Shaorong; Han Bing; Zhou Lei; Zhang Youjie; Jiang Shengyao; Wu Xinxin

1991-10-01

An experimental study on two-phase flow pattern in the riser of low pressure natural circulation system was performed. The local differential pressure signal was analysed for flow pattern. It is considered that Sr f·d/v can be used to distinguish different flow patterns and it has clear and definite physical meaning. Flow patterns at different inlet temperature with different system pressures (1.5 MPa, 0.24 MPa and 0.1 MPa) are described. It is considered that the flow pattern is only bubble flow without flow pattern change during the period of low quality density-wave instability at 1.5 MPa. There is no density-wave oscillation in the system, when flow pattern is in bubble-intermittent transition area. The effect of flash vaporization on stability at low pressure is discussed

Self-Organisation in Spatial Systems-From Fractal Chaos to Regular Patterns and Vice Versa.

Directory of Open Access Journals (Sweden)

Michal Banaszak

Full Text Available This study offers a new perspective on the evolutionary patterns of cities or urban agglomerations. Such developments can range from chaotic to fully ordered. We demonstrate that in a dynamic space of interactive human behaviour cities produce a wealth of gravitational attractors whose size and shape depend on the resistance of space emerging inter alia from transport friction costs. This finding offers original insights into the complex evolution of spatial systems and appears to be consistent with the principles of central place theory known from the spatial sciences and geography. Our approach is dynamic in nature and forms a generalisation of hierarchical principles in geographic space.

Particles and Patterns in Cellular Automata

International Nuclear Information System (INIS)

Jen, E.; Das, R.; Beasley, C.E.

1999-01-01

This is the final report of a three-year, Laboratory Directed Research and Development (LDRD) project at Los Alamos National Laboratory (LANL). Our objective has been to develop tools for studying particle interactions in a class of dynamical systems characterized by discreteness, determinism, local interaction, and an inherently parallel form of evolution. These systems can be described by cellular automata (CA) and the behavior we studied has improved our understanding of the nature of patterns generated by CAs, their ability to perform global computations, and their relationship to continuous dynamical systems. We have also developed a rule-table mathematics that enables one to custom-design CA rule tables to generate patterns of specified types, or to perform specified computational tasks

Foam patterns

Science.gov (United States)

Chaudhry, Anil R; Dzugan, Robert; Harrington, Richard M; Neece, Faurice D; Singh, Nipendra P; Westendorf, Travis

2013-11-26

A method of creating a foam pattern comprises mixing a polyol component and an isocyanate component to form a liquid mixture. The method further comprises placing a temporary core having a shape corresponding to a desired internal feature in a cavity of a mold and inserting the mixture into the cavity of the mold so that the mixture surrounds a portion of the temporary core. The method optionally further comprises using supporting pins made of foam to support the core in the mold cavity, with such pins becoming integral part of the pattern material simplifying subsequent processing. The method further comprises waiting for a predetermined time sufficient for a reaction from the mixture to form a foam pattern structure corresponding to the cavity of the mold, wherein the foam pattern structure encloses a portion of the temporary core and removing the temporary core from the pattern independent of chemical leaching.

Spiral patterns near Turing instability in a discrete reaction diffusion system

International Nuclear Information System (INIS)

Li, Meifeng; Han, Bo; Xu, Li; Zhang, Guang

2013-01-01

In this paper, linear stability analysis is applied to an exponential discrete Lotka–Volterra system, which describes the competition between two identical species. Conditions for the Turing instability are obtained and the emergence of spiral patterns is demonstrated by means of numerical simulations in the vicinity of the bifurcation point. Moreover, the impact of crucial system parameters on the stability and coherence of spiral patterns is illustrated on several examples

Foundations for a syntatic pattern recognition system for genomic DNA sequences

Energy Technology Data Exchange (ETDEWEB)

Searles, D.B.

1993-03-01

The goal of the proposed work is the creation of a software system that will perform sophisticated pattern recognition and related functions at a level of abstraction and with expressive power beyond current general-purpose pattern-matching systems for biological sequences; and with a more uniform language, environment, and graphical user interface, and with greater flexibility, extensibility, embeddability, and ability to incorporate other algorithms, than current special-purpose analytic software.

Merlin : microsimulation system for predicting leisure activity-travel patterns

NARCIS (Netherlands)

Middelkoop, van M.; Borgers, A.W.J.; Timmermans, H.J.P.

2004-01-01

Development of a model of annual activity-travel patterns of leisure and vacation travel is reported. The simulation system, called Merlin, is a hybrid model system consisting of discrete choice models and rule-based models. It predicts the annual number of day trips and vacations, and the profile

System of marketing: principles of forming, functioning and development

OpenAIRE

Mazko, T.

2010-01-01

Initial positions of system marketing forming, functioning and development are examined as a component subsystem to the enterprise. Principles are offered in relation to the certain states of the system of marketing for enterprise

Eating patterns and food systems: critical knowledge requirements for policy design and implementation

Directory of Open Access Journals (Sweden)

Guyomard Hervé

2012-09-01

Full Text Available Abstract Eating patterns are important for building sustainable food and agricultural systems. This paper begins by presenting the main features of eating patterns worldwide. These eating patterns include the relative convergence of diets, more rapid food transition in emerging and developing countries, development of a more complex food chain, and substantial food losses and waste at distribution and final consumption stages. These patterns have negative consequences on health and the environment. The drivers of these patterns are examined to identify knowledge gaps, the filling of which should facilitate the design and implementation of actions and policies aimed at making food systems more sustainable.

Transformative Learning: Patterns of Psychophysiologic Response and Technology-Enabled Learning and Intervention Systems

Science.gov (United States)

2008-09-01

Psychophysiologic Response and Technology -Enabled Learning and Intervention Systems PRINCIPAL INVESTIGATOR: Leigh W. Jerome, Ph.D...NUMBER Transformative Learning : Patterns of Psychophysiologic Response and Technology - Enabled Learning and Intervention Systems 5b. GRANT NUMBER...project entitled “Transformative Learning : Patterns of Psychophysiologic Response in Technology Enabled Learning and Intervention Systems.” The

The role of organizers in patterning the nervous system.

Science.gov (United States)

Kiecker, Clemens; Lumsden, Andrew

2012-01-01

The foundation for the anatomical and functional complexity of the vertebrate central nervous system is laid during embryogenesis. After Spemann's organizer and its derivatives have endowed the neural plate with a coarse pattern along its anteroposterior and mediolateral axes, this basis is progressively refined by the activity of secondary organizers within the neuroepithelium that function by releasing diffusible signaling factors. Dorsoventral patterning is mediated by two organizer regions that extend along the dorsal and ventral midlines of the entire neuraxis, whereas anteroposterior patterning is controlled by several discrete organizers. Here we review how these secondary organizers are established and how they exert their signaling functions. Organizer signals come from a surprisingly limited set of signaling factor families, indicating that the competence of target cells to respond to those signals plays an important part in neural patterning.

Analysis of pattern formation in systems with competing range interactions

International Nuclear Information System (INIS)

Zhao, H J; Misko, V R; Peeters, F M

2012-01-01

We analyzed pattern formation and identified various morphologies in a system of particles interacting through a non-monotonic potential with a competing range interaction characterized by a repulsive core (r c ) and an attractive tail (r > r c ), using molecular-dynamics simulations. Depending on parameters, the interaction potential models the inter-particle interaction in various physical systems ranging from atoms, molecules and colloids to vortices in low κ type-II superconductors and in recently discovered ‘type-1.5’ superconductors. We constructed a ‘morphology diagram’ in the plane ‘critical radius r c -density n’ and proposed a new approach to characterizing the different types of patterns. Namely, we elaborated a set of quantitative criteria in order to identify the different pattern types, using the radial distribution function (RDF), the local density function and the occupation factor. (paper)

Navigated Pattern Laser System versus Single-Spot Laser System for Postoperative 360-Degree Laser Retinopexy.

Science.gov (United States)

Kulikov, Alexei N; Maltsev, Dmitrii S; Boiko, Ernest V

2016-01-01

Purpose . To compare three 360°-laser retinopexy (LRP) approaches (using navigated pattern laser system, single-spot slit-lamp (SL) laser delivery, and single-spot indirect ophthalmoscope (IO) laser delivery) in regard to procedure duration, procedural pain score, technical difficulties, and the ability to achieve surgical goals. Material and Methods . Eighty-six rhegmatogenous retinal detachment patients (86 eyes) were included in this prospective randomized study. The mean procedural time, procedural pain score (using 4-point Verbal Rating Scale), number of laser burns, and achievement of the surgical goals were compared between three groups (pattern LRP (Navilas® laser system), 36 patients; SL-LRP, 28 patients; and IO-LRP, 22 patients). Results . In the pattern LRP group, the amount of time needed for LRP and pain level were statistically significantly lower, whereas the number of applied laser burns was higher compared to those in the SL-LRP group and in the IO-LRP group. In the pattern LRP, SL-LRP, and IO-LRP groups, surgical goals were fully achieved in 28 (77.8%), 17 (60.7%), and 13 patients (59.1%), respectively ( p > 0.05). Conclusion . The navigated pattern approach allows improving the treatment time and pain in postoperative 360° LRP. Moreover, 360° pattern LRP is at least as effective in achieving the surgical goal as the conventional (slit-lamp or indirect ophthalmoscope) approaches with a single-spot laser.

Feeding patterns of molestus and pipiens forms of Culex pipiens (Diptera: Culicidae) in a region of high hybridization.

Science.gov (United States)

Gomes, Bruno; Sousa, Carla A; Vicente, José L; Pinho, Leonor; Calderón, Isabel; Arez, Eliane; Almeida, António Pg; Donnelly, Martin J; Pinto, João

2013-04-11

Two biological forms of the mosquito Culex pipiens s.s., denoted pipiens and molestus, display behavioural differences that may affect their role as vectors of arboviruses. In this study, the feeding patterns of molestus and pipiens forms were investigated in Comporta (Portugal), where high levels of inter-form admixture have been recorded. Indoor and outdoor mosquito collections were performed in the summer of 2010. Collected Cx. pipiens s.l. females were molecularly identified to species and form by PCR and genotyped for six microsatellites. The source of the blood meal in post-fed females was determined by ELISA and mitochondrial DNA sequencing. The distribution of the forms differed according to the collection method. The molestus form was present only in indoor collections, whereas pipiens and admixed individuals were sampled both indoors and outdoors. In both forms, over 90% of blood meals were made on avian hosts. These included blood meals taken from Passeriformes (Passer domesticus and Turdus merula) by females caught resting inside domestic shelters. Genetic structure and blood meal analyses suggest the presence of a bird biting molestus population in the study area. Both forms were found to rest indoors, mainly in avian shelters, but at least a proportion of females of the pipiens form may bite outdoors in sylvan habitats and then search for anthropogenic resting sites to complete their gonotrophic cycle. This behaviour may potentiate the accidental transmission of arboviruses to humans in the region.

Pattern overlap implies runaway growth in hierarchical tile systems

Directory of Open Access Journals (Sweden)

David Doty

2015-11-01

Full Text Available We show that in the hierarchical tile assembly model, if there is a producible assembly that overlaps a nontrivial translation of itself consistently (i.e., the pattern of tile types in the overlap region is identical in both translations, then arbitrarily large assemblies are producible. The significance of this result is that tile systems intended to controllably produce finite structures must avoid pattern repetition in their producible assemblies that would lead to such overlap.This answers an open question of Chen and Doty (SODA 2012, who showed that so-called "partial-order" systems producing a unique finite assembly and avoiding such overlaps must require time linear in the assembly diameter. An application of our main result is that any system producing a unique finite assembly is automatically guaranteed to avoid such overlaps, simplifying the hypothesis of Chen and Doty's main theorem.

Complex Systems and Patterns

NARCIS (Netherlands)

Pieters, C.P.

2008-01-01

Although the term 'pattern' is often used in science, it is an elusive term and can have different dialectic meanings in various disciplines. Yet, the 'feel' for this term is fairly consistent; it usually requires little explanation to understand what a pattern is, and therefore it usually tends to

Sequentially firing neurons confer flexible timing in neural pattern generators

International Nuclear Information System (INIS)

Urban, Alexander; Ermentrout, Bard

2011-01-01

Neuronal networks exhibit a variety of complex spatiotemporal patterns that include sequential activity, synchrony, and wavelike dynamics. Inhibition is the primary means through which such patterns are implemented. This behavior is dependent on both the intrinsic dynamics of the individual neurons as well as the connectivity patterns. Many neural circuits consist of networks of smaller subcircuits (motifs) that are coupled together to form the larger system. In this paper, we consider a particularly simple motif, comprising purely inhibitory interactions, which generates sequential periodic dynamics. We first describe the dynamics of the single motif both for general balanced coupling (all cells receive the same number and strength of inputs) and then for a specific class of balanced networks: circulant systems. We couple these motifs together to form larger networks. We use the theory of weak coupling to derive phase models which, themselves, have a certain structure and symmetry. We show that this structure endows the coupled system with the ability to produce arbitrary timing relationships between symmetrically coupled motifs and that the phase relationships are robust over a wide range of frequencies. The theory is applicable to many other systems in biology and physics.

A chromia forming thermal barrier coating system

Energy Technology Data Exchange (ETDEWEB)

Taylor, M.P.; Evans, H.E. [Metallurgy and Materials, The University of Birmingham, Birmingham, B15 2TT (United Kingdom); Gray, S.; Nicholls, J.R. [Surface Science and Engineering Centre, Cranfield University, Cranfield, MK43 0AL (United Kingdom)

2011-07-15

Conventional thermal barrier coating (TBC) systems consist of an insulating ceramic topcoat, a bond coat for oxidation protection and the underlying superalloy designed to combat the oxidising conditions in aero- and land-based gas turbines. Under high-temperature oxidation, the use of an alumina forming bond coat is warranted, thus all current TBC systems are optimised for the early formation of a dense, protective thermally grown oxide (TGO) of alumina. This also offers protection against Type I hot corrosion but a chromia layer gives better protection against Type II corrosion and intermediate temperatures, the conditions found in land-based gas turbines. In this paper the authors present the first known results for a chromia forming TBC system. Tests have been performed under oxidising conditions, up to 1000 h, at temperatures between 750 C and 900 C, and under Type I (900 C) and Type II (700 C) hot corrosion conditions up to 500 h. Under all these conditions no cracking, spallation or degradation was observed. Examination showed the formation of an adherent, dense chromia TGO at the bond coat / topcoat interface. These initial results are very encouraging and the TGO thicknesses agree well with comparable results reported in the literature. (Copyright copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Roll forming of eco-friendly stud

Science.gov (United States)

Keum, Y. T.; Lee, S. Y.; Lee, T. H.; Sim, J. K.

2013-12-01

In order to manufacture an eco-friendly stud, the sheared pattern is designed by the Taguchi method and expanded by the side rolls. The seven geometrical shape of sheared pattern are considered in the structural and thermal analyses to select the best functional one in terms of the durability and fire resistance of dry wall. For optimizing the size of the sheared pattern chosen, the L9 orthogonal array and smaller-the-better characteristics of the Taguchi method are used. As the roll gap causes forming defects when the upper-and-lower roll type is adopted for expanding the sheared pattern, the side roll type is introduced. The stress and strain distributions obtained by the FEM simulation of roll-forming processes are utilized for the design of expanding process. The expanding process by side rolls shortens the length of expanding process and minimizes the cost of dies. Furthermore, the stud manufactured by expanding the sheared pattern of the web is an eco-friend because of the scrapless roll-forming process. In addition, compared to the conventionally roll-formed stud, the material cost is lessened about 13.6% and the weight is lightened about 15.5%.

A canonical form of the equation of motion of linear dynamical systems

Science.gov (United States)

Kawano, Daniel T.; Salsa, Rubens Goncalves; Ma, Fai; Morzfeld, Matthias

2018-03-01

The equation of motion of a discrete linear system has the form of a second-order ordinary differential equation with three real and square coefficient matrices. It is shown that, for almost all linear systems, such an equation can always be converted by an invertible transformation into a canonical form specified by two diagonal coefficient matrices associated with the generalized acceleration and displacement. This canonical form of the equation of motion is unique up to an equivalence class for non-defective systems. As an important by-product, a damped linear system that possesses three symmetric and positive definite coefficients can always be recast as an undamped and decoupled system.

Organ involvement in Argentinian systemic sclerosis patients with "late" pattern as compared to patients with "early/active" pattern by nailfold capillaroscopy.

Science.gov (United States)

Marino Claverie, Lucila; Knobel, Elizabeth; Takashima, Lorena; Techera, Lorena; Oliver, Marina; Gonzalez, Paula; Romanini, Félix E; Fonseca, María L; Mamani, Marta N

2013-06-01

Changes in nailfold capillaroscopy in systemic sclerosis patients could be related to the disease severity. The aim of this study was to investigate whether patients with "late" scleroderma (SD) pattern have more organ involvement than patients with "early/active" SD pattern. Forty-six Argentinian patients (44 women and 2 men), with a diagnosis of systemic sclerosis, were distributed in two groups based on the presence of late and early/active patterns. Organ involvement was assessed as follows: pulmonary function by chest radiography, high-resolution chest tomography (HRCT), lung volume tests, and diffusing capacity for carbon monoxide (DLCO); esophageal involvement by manometry; and pulmonary arterial hypertension (PAH) by Doppler echocardiography and six-minute walk test. Honeycombing of the lungs evaluated by HRCT was more frequently present in patients with late pattern compared with early/active patients (p = 0.01). We also found statistically significant differences in lung volume tests (p = 0.03) and DLCO (p = 0.02) between the two SD pattern groups. Esophageal manometry showed a significantly higher frequency of motility disorders in the group with late pattern (p = 0.0024). In this study, patients with late pattern had higher frequency of pulmonary and esophageal involvement compared with patients with early/active pattern.

AN UNUSUAL PATTERN OF GENE FLOW BETWEEN THE TWO SOCIAL FORMS OF THE FIRE ANT SOLENOPSIS INVICTA.

Science.gov (United States)

Ross, Kenneth G; Shoemaker, D DeWayne

1993-10-01

Uncertainty over the role of shifts in social behavior in the process of speciation in social insects has stimulated interest in determining the extent of gene flow between conspecific populations differing in colony social organization. Allele and genotype frequencies at 12 neutral polymorphic protein markers, as well as the numbers of alleles at the sex-determining locus (loci), are shown here to be consistent with significant ongoing gene flow between two geographically adjacent populations of Solenopsis invicta that differ in colony queen number. Data from a thirteenth protein marker that is under strong differential selection in the two social forms confirm that such gene flow occurs. Data from this selected locus, combined with knowledge of the reproductive biology of the two social forms, further suggest that interform gene flow is largely unidirectional and mediated through males only. This unusual pattern of gene flow results from the influence of the unique social enviroments of the two forms on the behavior of workers and on the reproductive physiology of sexuals. © 1993 The Society for the Study of Evolution.

Insect form vision as one potential shaping force of spider web decoration design.

Science.gov (United States)

Cheng, R-C; Yang, E-C; Lin, C-P; Herberstein, M E; Tso, I-M

2010-03-01

Properties of prey sensory systems are important factors shaping the design of signals generated by organisms exploiting them. In this study we assessed how prey sensory preference affected the exploiter signal design by investigating the evolutionary relationship and relative attractiveness of linear and cruciate form web decorations built by Argiope spiders. Because insects have an innate preference for bilaterally symmetrical patterns, we hypothesized that cruciate form decorations were evolved from linear form due to their higher visual attractiveness to insects. We first reconstructed a molecular phylogeny of the Asian members of the genus Argiope using mitochondrial markers to infer the evolutionary relationship of two decoration forms. Results of ancestral character state reconstruction showed that the linear form was ancestral and the cruciate form derived. To evaluate the luring effectiveness of two decoration forms, we performed field experiments in which the number and orientation of decoration bands were manipulated. Decoration bands arranged in a cruciate form were significantly more attractive to insects than those arranged in a linear form, no matter whether they were composed of silks or dummies. Moreover, dummy decoration bands arranged in a cruciate form attracted significantly more insects than those arranged in a vertical/horizontal form. Such results suggest that pollinator insects' innate preference for certain bilateral or radial symmetrical patterns might be one of the driving forces shaping the arrangement pattern of spider web decorations.

Machining and metrology systems for free-form laser printer mirrors

Indian Academy of Sciences (India)

R. Narasimhan (Krishtel eMaging) 1461 1996 Oct 15 13:05:22

optical systems were designed and manufactured for the individual laser wavelength to be ... The design objective in utilizing a free-form mirror has resulted in a corresponding ... Since mass production of these free-form mirrors is required, the ...

An intelligent temporal pattern classification system using fuzzy ...

Indian Academy of Sciences (India)

In this paper, we propose a new pattern classification system by combining Temporal features with Fuzzy Min–Max (TFMM) neural network based classifier for effective decision support in medical diagnosis. Moreover, a Particle Swarm Optimization (PSO) algorithm based rule extractor is also proposed in this work for ...

Vascular pattern formation in plants.

Science.gov (United States)

Scarpella, Enrico; Helariutta, Ykä

2010-01-01

Reticulate tissue systems exist in most multicellular organisms, and the principles underlying the formation of cellular networks have fascinated philosophers, mathematicians, and biologists for centuries. In particular, the beautiful and varied arrangements of vascular tissues in plants have intrigued mankind since antiquity, yet the organizing signals have remained elusive. Plant vascular tissues form systems of interconnected cell files throughout the plant body. Vascular cells are aligned with one another along continuous lines, and vascular tissues differentiate at reproducible positions within organ environments. However, neither the precise path of vascular differentiation nor the exact geometry of vascular networks is fixed or immutable. Several recent advances converge to reconcile the seemingly conflicting predictability and plasticity of vascular tissue patterns. A control mechanism in which an apical-basal flow of signal establishes a basic coordinate system for body axis formation and vascular strand differentiation, and in which a superimposed level of radial organizing cues elaborates cell patterns, would generate a reproducible tissue configuration in the context of an underlying robust, self-organizing structure, and account for the simultaneous regularity and flexibility of vascular tissue patterns. Copyright 2010 Elsevier Inc. All rights reserved.

Analytical derivation of traffic patterns in cache-coherent shared-memory systems

DEFF Research Database (Denmark)

Stuart, Matthias Bo; Sparsø, Jens

2011-01-01

This paper presents an analytical method to derive the worst-case traffic pattern caused by a task graph mapped to a cache-coherent shared-memory system. Our analysis allows designers to rapidly evaluate the impact of different mappings of tasks to IP cores on the traffic pattern. The accuracy...

A regression-based Kansei engineering system based on form feature lines for product form design

Directory of Open Access Journals (Sweden)

Yan Xiong

2016-06-01

Full Text Available When developing new products, it is important for a designer to understand users’ perceptions and develop product form with the corresponding perceptions. In order to establish the mapping between users’ perceptions and product design features effectively, in this study, we presented a regression-based Kansei engineering system based on form feature lines for product form design. First according to the characteristics of design concept representation, product form features–product form feature lines were defined. Second, Kansei words were chosen to describe image perceptions toward product samples. Then, multiple linear regression and support vector regression were used to construct the models, respectively, that predicted users’ image perceptions. Using mobile phones as experimental samples, Kansei prediction models were established based on the front view form feature lines of the samples. From the experimental results, these two predict models were of good adaptability. But in contrast to multiple linear regression, the predict performance of support vector regression model was better, and support vector regression is more suitable for form regression prediction. The results of the case showed that the proposed method provided an effective means for designers to manipulate product features as a whole, and it can optimize Kansei model and improve practical values.

Electromagnetic form factors of composite systems

International Nuclear Information System (INIS)

Nowak, E.J.

1978-01-01

Electromagnetic form factors are examined for a spin-zero, two-body composite system with emphasis on the case of small momentum transfer and/or deep (relativistic) binding. Perturbation theory calculations are first performed using spin-zero and then spin-one-half constituents. A dispersion representation of the bound-state vertex function is conjectured first for scalar and then for fermion constituents. Then a relativistic effective range approximation (RERA) is developed for each case and applied to the calculation of the electromagnetic form factor. The approach is applied to the study of the charge radii of the K 0 and K + mesons. The K/sub l3/ form factor is calculated in the fermion constituent RERA model, and restrictions are imposed on the model parameters from available experimental data. With these restrictions the limits 0.24fm less than or equal to √[abs. value ( 2 >/sub K 0 /)] less than or equal to = 0.36fm and 0.66fm less than or equal to = √( 2 >/sub K + /) less than or equal to 0.79fm are obtained for the kaon charge radii, and -.22 less than or equal to xi less than or equal to -.13 is found for the ratio of the neutral to charged kaon charge radius squared

Self-Assembly, Pattern Formation and Growth Phenomena in Nano-Systems

CERN Document Server

Nepomnyashchy, Alexander A

2006-01-01

Nano-science and nano-technology are rapidly developing scientific and technological areas that deal with physical, chemical and biological processes that occur on nano-meter scale – one millionth of a millimeter. Self-organization and pattern formation play crucial role on nano-scales and promise new, effective routes to control various nano-scales processes. This book contains lecture notes written by the lecturers of the NATO Advanced Study Institute "Self-Assembly, Pattern Formation and Growth Phenomena in Nano-Systems" that took place in St Etienne de Tinee, France, in the fall 2004. They give examples of self-organization phenomena on micro- and nano-scale as well as examples of the interplay between phenomena on nano- and macro-scales leading to complex behavior in various physical, chemical and biological systems. They discuss such fascinating nano-scale self-organization phenomena as self-assembly of quantum dots in thin solid films, pattern formation in liquid crystals caused by light, self-organi...

Tribo-systems for Sheet Metal Forming

DEFF Research Database (Denmark)

Bay, Niels

2009-01-01

The present paper gives an overview of more than 10 years work by the author’s research group through participation in national as well as international framework programmes on developing and testing environmentally friendly lubricants and tool materials and coatings inhibiting galling. Partners ......’s research group has especially been involved in the development of a system of tribo-tests for sheet metal forming and in testing and modelling of friction and limits of lubrication of new, environmentally friendly lubricants and tool materials....

Geotemperature pattern and geothermal resources in North China Basin

Energy Technology Data Exchange (ETDEWEB)

Deng Xiao; Chen Moxing; Xiong Liangping; Zhang Juming [Inst. of Geology. Academis Sinica, Beijing (China)

1995-12-31

Geotemperature pattern of the North China Basin has been studied. Results indicate that the geotemperature pattern of the Basin is in close correlation with its geological structure, mainly controlled by the structural form or the relief of the basement rock. Generally, high heat flow and high geotemperature zone correspond to basement uplifts whereas low heat flow and low geotemperature zone, to basement depressions. As a consequence, a `high-low-high` geotemperature pattern with NE and EW trending was thus formed and is observed in the North China Basin. This pattern has been validated and revealed by mathematical simulation. In the North China Basin, two main thermal water reservoirs are identified: porous type water in the Neogene system and fissure type water in Lower Paleozoic to Mid-Upper Proterozoic limestone bedrocks. The reserve of thermal water and recoverable resource are estimated. Results show that the North China Basin is an area with abundant low-medium temperature thermal water resources. 9 figs., 5 tabs., 10 refs.

SEDRIO/INCORE, an automatic optimal loading pattern search system for PWR NPP reload core using an expert system

International Nuclear Information System (INIS)

Xian Chunyu; Zhang Zongyao

2003-01-01

The expert knowledge library for Daya Bay and Qinshan phase II NPP has been established based on expert knowledge, and the reload core loading pattern heuristic search is performed. The in-core fuel management code system INCORE that has been used in engineering design is employed for neutron calculation, and loading pattern is evaluated by using of cycle length and core radial power peaking factor. The developed system SEDRIO/INCORE has been applied in cycle 4 for unit 2 of Daya Bay NPP and cycle 4 for Phase II in Qinshan NPP. The application demonstrated that the loading patterns obtained by SEDRIO/INCORE system are much better than reference ones from the view of the radial power peak and the cycle length

Predictor-based stabilization for chained form systems with input time delay

Directory of Open Access Journals (Sweden)

Mnif Faïçal

2016-12-01

Full Text Available This note addresses the stabilization problem of nonlinear chained-form systems with input time delay. We first employ the so-called σ-process transformation that renders the feedback system under a linear form. We introduce a particular transformation to convert the original system into a delay-free system. Finally, we apply a state feedback control, which guarantees a quasi-exponential stabilization to all the system states, which in turn converge exponentially to zero. Then we employ the so-called -type control to achieve a quasi-exponential stabilization of the subsequent system. A simulation example illustrated on the model of a wheeled mobile robot is provided to demonstrate the effectiveness of the proposed approach.

Production Planning and Planting Pattern Scheduling Information System for Horticulture

Science.gov (United States)

Vitadiar, Tanhella Zein; Farikhin; Surarso, Bayu

2018-02-01

This paper present the production of planning and planting pattern scheduling faced by horticulture farmer using two methods. Fuzzy time series method use to predict demand on based on sales amount, while linear programming is used to assist horticulture farmers in making production planning decisions and determining the schedule of cropping patterns in accordance with demand predictions of the fuzzy time series method, variable use in this paper is size of areas, production advantage, amount of seeds and age of the plants. This research result production planning and planting patterns scheduling information system with the output is recommendations planting schedule, harvest schedule and the number of seeds will be plant.

Automated system for the determination of patterns of high-intensity LEDs

International Nuclear Information System (INIS)

Baly, L.; Bolaño, L.; Arteche, R.; Broco, Y.; Quesada, I.; Rodríguez, E.

2008-01-01

Determination of high-intensity LEDs lighting patterns is an important step for the simulation and planning of arrays of these devices configurations. Currently there are systems based on CCD cameras able to efficiently solve this problem, however the high cost of these is a limiting factor for use. Another limitation of CCD cameras, is that they are designed for light levels much lower than those produced by a high-intensity LED. In this paper we present an automated system for the determination of the intensity of LEDs based on the scan point to point patterns. The results of the analysis of a type of LED based on arrays of bars with built-in optical system is presented.

Pattern recognition

CERN Document Server

Theodoridis, Sergios

2003-01-01

Pattern recognition is a scientific discipline that is becoming increasingly important in the age of automation and information handling and retrieval. Patter Recognition, 2e covers the entire spectrum of pattern recognition applications, from image analysis to speech recognition and communications. This book presents cutting-edge material on neural networks, - a set of linked microprocessors that can form associations and uses pattern recognition to ""learn"" -and enhances student motivation by approaching pattern recognition from the designer's point of view. A direct result of more than 10

How systems form and how systems break a beginner’s guide for studying the world

CERN Document Server

Ren, Chiang H

2017-01-01

Our world is composed of systems within systems—the machines we build, the information we share, the organizations we form, and elements of nature that surround us. Therefore, nearly every field of study and practice embodies behaviors stemming from system dynamics. Yet the study of systems has remained somewhat fragmented based on philosophies, methodologies, and intentions. Many methodologies for analyzing complex systems extend far beyond the traditional framework of deduction evaluation and may, thus, appear mysterious to the uninitiated. This book seeks to dispel the mysteries of systems analysis by holistically explaining the philosophies, methodologies, and intentions in the context of understanding how all types of systems in our world form and how these systems break. This presentation is made at the level of conceptual understanding, with plenty of figures but no mathematical formulas, for the beginning student and interested readers new to studying systems. Through the conceptual understanding pr...

Complexity, rhizome and magma, three key elements in pattern building in environmental research

International Nuclear Information System (INIS)

Noguera de Echeverri, Ana Patricia

2002-01-01

The following reading synthesizes the rur-urban-agrary environmental research pattern that appear from the research Caldas Agrary Environmental Profile (IDEA, National University, Manizales - Colciencias, 1998 - 2000). This pattern is constructed from three ideas of the contemporary philosophy: complexity, rhizome and magma that comes from another disciplines: the mathematics, botanic, and geology. The genetics-historical method that follows this article, starts with a critical analysis to the relation forms between society and nature that belongs to the modernity, to do then, a presentation of the influence of the ecology in the construction of new relations between society and nature, culture and nature, and the influence of the theory of systems in a systemic view of society, culture, and nature. Finish with a presentation of the pattern ecosystem-culture made for Augusto Angel Maya and the critical-development that becomes form this pattern, that we had named rur-urban-agrary rhizoma. For example we show how this research pattern let us to amplify the methodology of river basins that we use inside the Agrary Environmental Profile

Application of the new pattern recognition system in the new e-nose to detecting Chinese spirits

International Nuclear Information System (INIS)

Gu Yu; Li Qiang

2014-01-01

We present a new pattern recognition system based on moving average and linear discriminant analysis (LDA), which can be used to process the original signal of the new polymer quartz piezoelectric crystal air-sensitive sensor system we designed, called the new e-nose. Using the new e-nose, we obtain the template datum of Chinese spirits via a new pattern recognition system. To verify the effectiveness of the new pattern recognition system, we select three kinds of Chinese spirits to test, our results confirm that the new pattern recognition system can perfectly identify and distinguish between the Chinese spirits. (electromagnetism, optics, acoustics, heat transfer, classical mechanics, and fluid dynamics)

Streamline topology: Patterns in fluid flows and their bifurcations

DEFF Research Database (Denmark)

Brøns, Morten

2007-01-01

Using dynamical systems theory, we consider structures such as vortices and separation in the streamline patterns of fluid flows. Bifurcation of patterns under variation of external parameters is studied using simplifying normal form transformations. Flows away from boundaries, flows close to fix...... walls, and axisymmetric flows are analyzed in detail. We show how to apply the ideas from the theory to analyze numerical simulations of the vortex breakdown in a closed cylindrical container....

Meta-algorithmics patterns for robust, low cost, high quality systems

CERN Document Server

Simske, Steven J

2013-01-01

The confluence of cloud computing, parallelism and advanced machine intelligence approaches has created a world in which the optimum knowledge system will usually be architected from the combination of two or more knowledge-generating systems. There is a need, then, to provide a reusable, broadly-applicable set of design patterns to empower the intelligent system architect to take advantage of this opportunity. This book explains how to design and build intelligent systems that are optimized for changing system requirements (adaptability), optimized for changing system input (robustness), an

Directional radiation pattern in structural-acoustic coupled system

Science.gov (United States)

Seo, Hee-Seon; Kim, Yang-Hann

2005-07-01

In this paper we demonstrate the possibility of designing a radiator using structural-acoustic interaction by predicting the pressure distribution and radiation pattern of a structural-acoustic coupling system that is composed by a wall and two spaces. If a wall separates spaces, then the wall's role in transporting the acoustic characteristics of the spaces is important. The spaces can be categorized as bounded finite space and unbounded infinite space. The wall considered in this study composes two plates and an opening, and the wall separates one space that is highly reverberant and the other that is unbounded without any reflection. This rather hypothetical circumstance is selected to study the general coupling problem between the finite and infinite acoustic domains. We developed an equation that predicts the energy distribution and energy flow in the two spaces separated by a wall, and its computational examples are presented. Three typical radiation patterns that include steered, focused, and omnidirected are presented. A designed radiation pattern is also presented by using the optimal design algorithm.

An investigation of some quantum systems using modified quantization rule form

Energy Technology Data Exchange (ETDEWEB)

Maiz, F., E-mail: fethimaiz@gmail.com [University of Cartage, Nabeul Engineering Preparatory Institute, Merazka, 8000 Nabeul (Tunisia); King Khalid University, Faculty of Science, Physics Department, P.O. Box 9004, Abha 61413 (Saudi Arabia)

2014-09-15

We propose a new simple quantization rule form: J{sub n}=nπ+δ(n), for exactly solvable and nonsolvable quantum systems. Here, J{sub n} is the momentum integral between two turning points, n the principal quantum number, and δ(n) is a function of potential parameters and n. This new quantization rule form is a generalization of the conventional one, already developed for exactly solvable quantum systems. We found that δ(n) is a constant independent of n for exactly solvable quantum systems. We carry out the expression of δ(n) for V-shape potential, and show that it takes this form δ(n)=(π/2)+(1/a+bn+cn{sup 2}) for anharmonic oscillators potential V(x)=αx{sup p}+βx{sup 2}.

Application of pattern recognition technique on randon signals for automatic monitoring of dynamic systems with emphasis on nuclear reactors

International Nuclear Information System (INIS)

Nascimento, J.A. do.

1981-01-01

The time varying or noise component of dynamic system parameters contains information on the system state. Pattern recognition analysis of noise signals for such systems is a powerful technique for assessing 'system normality' or 'correct operation'. Data analysis with modern small computers enables the otherwise unmanageable volumes of data to be processed on line and the results presented in a meaningful form. These informations provide necessary data for maintaining the system at optimum operating conditions. An automatic pattern recognition program, PSDREC, developmed for the surveillance of nuclear reactor and rotating machinery is described, and the relevant theory is outlined. This program, which applies 8 statistical tests to calculated power spectral density (PSD) distributions, was earlier installed in a PDP-11/45 computer at IPEN. In this work it has been used to separately analyse recorded signals from three systems, namely an operational BWR power reactor (neutron signals), a water pump and a diesel motor (vibration signals). The latter two were, respectively, operated over a wide-range of flow and load conditions. The statistical tests were applied to frequency bands of (0,1-40) Hz, (0-1000) Hz and (0,20000) Hz. for the BWR, pump and diesel signal data, respectively. Operation and analysis conditions are given together with representative graphs of the analysed PSD distributions. Results of the tests - discussed in some detail - are considered to be satisfactory. (Author) [pt

Exchange bias of patterned systems: Model and numerical simulation

International Nuclear Information System (INIS)

Garcia, Griselda; Kiwi, Miguel; Mejia-Lopez, Jose; Ramirez, Ricardo

2010-01-01

The magnitude of the exchange bias field of patterned systems exhibits a notable increase in relation to the usual bilayer systems, where a continuous ferromagnetic film is deposited on an antiferromagnet insulator. Here we develop a model, and implement a Monte Carlo calculation, to interpret the experimental observations which is consistent with experimental results, on the basis of assuming a small fraction of spins pinned ferromagnetically in the antiferromagnetic interface layer.

Topological patterns of mesh textures in serpentinites

Science.gov (United States)

Miyazawa, M.; Suzuki, A.; Shimizu, H.; Okamoto, A.; Hiraoka, Y.; Obayashi, I.; Tsuji, T.; Ito, T.

2017-12-01

Serpentinization is a hydration process that forms serpentine minerals and magnetite within the oceanic lithosphere. Microfractures crosscut these minerals during the reactions, and the structures look like mesh textures. It has been known that the patterns of microfractures and the system evolutions are affected by the hydration reaction and fluid transport in fractures and within matrices. This study aims at quantifying the topological patterns of the mesh textures and understanding possible conditions of fluid transport and reaction during serpentinization in the oceanic lithosphere. Two-dimensional simulation by the distinct element method (DEM) generates fracture patterns due to serpentinization. The microfracture patterns are evaluated by persistent homology, which measures features of connected components of a topological space and encodes multi-scale topological features in the persistence diagrams. The persistence diagrams of the different mesh textures are evaluated by principal component analysis to bring out the strong patterns of persistence diagrams. This approach help extract feature values of fracture patterns from high-dimensional and complex datasets.

The evolution of nervous system patterning: insights from sea urchin development

Science.gov (United States)

Angerer, Lynne M.; Yaguchi, Shunsuke; Angerer, Robert C.; Burke, Robert D.

2011-01-01

Recent studies of the sea urchin embryo have elucidated the mechanisms that localize and pattern its nervous system. These studies have revealed the presence of two overlapping regions of neurogenic potential at the beginning of embryogenesis, each of which becomes progressively restricted by separate, yet linked, signals, including Wnt and subsequently Nodal and BMP. These signals act to specify and localize the embryonic neural fields – the anterior neuroectoderm and the more posterior ciliary band neuroectoderm – during development. Here, we review these conserved nervous system patterning signals and consider how the relationships between them might have changed during deuterostome evolution. PMID:21828090

Patterns, structures and regulations of domestic water cycle systems in China

Science.gov (United States)

Chu, Junying; Wang, Hao; Wang, Jianhua; Qin, Dayong

2010-05-01

Domestic water cycle systems serving as one critical component of artificial water cycle at the catchment's scale, is so closely related to public healthy, human rights and social-economic development, and has gained the highest priority in strategic water resource and municipal infrastructure planning. In this paper, three basic patterns of domestic water cycle systems are identified and analyzed, including rural domestic water system (i.e. primary level), urban domestic water system (i.e. intermediate level) and metropolitan domestic water system (i.e. senior level), with different "abstract-transport-consume-discharge" mechanisms and micro-components of water consumption (such as drinking, cooking, toilet flushing, showering or cleaning). The rural domestic water system is general simple with three basic "abstract-consume-discharge" mechanisms and micro-components of basic water consumption such as drinking, cooking, washing and sanitation. The urban domestic water system has relative complex mechanisms of "abstract-supply-consume-treatment-discharge" and more micro-components of water consumption such as bath, dishwashing or car washing. The metropolitan domestic water system (i.e. senior level) has the most complex mechanisms by considering internal water reuse, external wastewater reclamation, and nutrient recycling processes. The detailed structures for different water cycle pattern are presented from the aspects of water quantity, wastewater quality and nutrients flow. With the speed up of urbanization and development of social-economy in China, those three basic patterns are interacting, transforming and upgrading. According to the past experiences and current situations, urban domestic water system (i.e. intermediate level) is the dominant pattern based on indicator of system number or system scale. The metropolitan domestic water system (i.e. senior level) is the idealized model for the future development and management. Current domestic water system

Optimization of the working distance of an ion microprobe-forming system

International Nuclear Information System (INIS)

Melnik, K.I.; Magilin, D.V.; Ponomarev, A.G.

2009-01-01

A high-resolution ion microprobe necessitates the use of a small working distance (the distance from the final quadrupole lens of a probe-forming system to the specimen) in order to produce a large demagnification. But at the same time a small working distance is a source of a number of practical difficulties. We have presented an approach for determining a working distance that provides the best spatial resolution with the main practical limitations taken into account. We used a probe-forming system acceptance as a criterion of optimality. The calculations have revealed the existence of an optimal working distance in a set of common probe-forming systems, but it can be achieved only after changing of a design of a final quadrupole lens. We proposed a possible design of conic lens that allows solving the problem of detectors location and creating a short focus system. Three-dimensional calculations of magnetic field within this lens predicted a good quality of field structure.

Growth of large patterned arrays of neurons using plasma methods

International Nuclear Information System (INIS)

Brown, I G; Bjornstad, K A; Blakely, E A; Galvin, J E; Monteiro, O R; Sangyuenyongpipat, S

2003-01-01

To understand how large systems of neurons communicate, we need to develop, among other things, methods for growing patterned networks of large numbers of neurons. Success with this challenge will be important to our understanding of how the brain works, as well as to the development of novel kinds of computer architecture that may parallel the organization of the brain. We have investigated the use of metal ion implantation using a vacuum-arc ion source, and plasma deposition with a filtered vacuum-arc system, as a means of forming regions of selective neuronal attachment on surfaces. Lithographic patterns created by the treating surface with ion species that enhance or inhibit neuronal cell attachment allow subsequent proliferation and/or differentiation of the neurons to form desired patterned neural arrays. In the work described here, we used glass microscope slides as substrates, and some of the experiments made use of simple masks to form patterns of ion beam or plasma deposition treated regions. PC-12 rat neurons were then cultured on the treated substrates coated with Type I Collagen, and the growth and differentiation was monitored. Particularly good selective growth was obtained using plasma deposition of diamond-like carbon films of about one hundred Angstroms thickness. Neuron proliferation and the elaboration of dendrites and axons after the addition of nerve growth factor both showed excellent contrast, with prolific growth and differentiation on the treated surfaces and very low growth on the untreated surfaces

Growth of large patterned arrays of neurons using plasma methods

Energy Technology Data Exchange (ETDEWEB)

Brown, I G; Bjornstad, K A; Blakely, E A; Galvin, J E; Monteiro, O R; Sangyuenyongpipat, S [Lawrence Berkeley National Laboratory, Berkeley, CA 94720 (United States)

2003-05-01

To understand how large systems of neurons communicate, we need to develop, among other things, methods for growing patterned networks of large numbers of neurons. Success with this challenge will be important to our understanding of how the brain works, as well as to the development of novel kinds of computer architecture that may parallel the organization of the brain. We have investigated the use of metal ion implantation using a vacuum-arc ion source, and plasma deposition with a filtered vacuum-arc system, as a means of forming regions of selective neuronal attachment on surfaces. Lithographic patterns created by the treating surface with ion species that enhance or inhibit neuronal cell attachment allow subsequent proliferation and/or differentiation of the neurons to form desired patterned neural arrays. In the work described here, we used glass microscope slides as substrates, and some of the experiments made use of simple masks to form patterns of ion beam or plasma deposition treated regions. PC-12 rat neurons were then cultured on the treated substrates coated with Type I Collagen, and the growth and differentiation was monitored. Particularly good selective growth was obtained using plasma deposition of diamond-like carbon films of about one hundred Angstroms thickness. Neuron proliferation and the elaboration of dendrites and axons after the addition of nerve growth factor both showed excellent contrast, with prolific growth and differentiation on the treated surfaces and very low growth on the untreated surfaces.

Synergetic aspects of gas-discharge: lateral patterns in dc systems with a high ohmic barrier

Science.gov (United States)

Purwins, H.-G.; Stollenwerk, L.

2014-12-01

The understanding of self-organized patterns in spatially extended nonlinear dissipative systems is one of the most challenging subjects in modern natural sciences. Such patterns are also referred to as dissipative structures. We review this phenomenon in planar low temperature dc gas-discharge devices with a high ohmic barrier. It is demonstrated that for these systems a deep qualitative understanding of dissipative structures can be obtained from the point of view of synergetics. At the same time, a major contribution can be made to the general understanding of dissipative structures. The discharge spaces of the experimentally investigated systems, to good approximation, have translational and rotational symmetry by contraction. Nevertheless, a given system may exhibit stable current density distributions and related patterns that break these symmetries. Among the experimentally observed fundamental patterns one finds homogeneous isotropic states, fronts, periodic patterns, labyrinth structures, rotating spirals, target patterns and localized filaments. In addition, structures are observed that have the former as elementary building blocks. Finally, defect structures as well as irregular patterns are common phenomena. Such structures have been detected in numerous other driven nonlinear dissipative systems, as there are ac gas-discharge devices, semiconductors, chemical solutions, electrical networks and biological systems. Therefore, from the experimental observations it is concluded that the patterns in planar low temperature dc gas-discharge devices exhibit universal behavior. From the theoretical point of view, dissipative structures of the aforementioned kind are also referred to as attractors. The possible sets of attractors are an important characteristic of the system. The number and/or qualitative nature of attractors may change when changing parameters. The related bifurcation behavior is a central issue of the synergetic approach chosen in the present

Synergetic aspects of gas-discharge: lateral patterns in dc systems with a high ohmic barrier

International Nuclear Information System (INIS)

Purwins, H-G; Stollenwerk, L

2014-01-01

The understanding of self-organized patterns in spatially extended nonlinear dissipative systems is one of the most challenging subjects in modern natural sciences. Such patterns are also referred to as dissipative structures. We review this phenomenon in planar low temperature dc gas-discharge devices with a high ohmic barrier. It is demonstrated that for these systems a deep qualitative understanding of dissipative structures can be obtained from the point of view of synergetics. At the same time, a major contribution can be made to the general understanding of dissipative structures. The discharge spaces of the experimentally investigated systems, to good approximation, have translational and rotational symmetry by contraction. Nevertheless, a given system may exhibit stable current density distributions and related patterns that break these symmetries. Among the experimentally observed fundamental patterns one finds homogeneous isotropic states, fronts, periodic patterns, labyrinth structures, rotating spirals, target patterns and localized filaments. In addition, structures are observed that have the former as elementary building blocks. Finally, defect structures as well as irregular patterns are common phenomena. Such structures have been detected in numerous other driven nonlinear dissipative systems, as there are ac gas-discharge devices, semiconductors, chemical solutions, electrical networks and biological systems. Therefore, from the experimental observations it is concluded that the patterns in planar low temperature dc gas-discharge devices exhibit universal behavior. From the theoretical point of view, dissipative structures of the aforementioned kind are also referred to as attractors. The possible sets of attractors are an important characteristic of the system. The number and/or qualitative nature of attractors may change when changing parameters. The related bifurcation behavior is a central issue of the synergetic approach chosen in the present

Disjoint forms in graphical user interfaces

NARCIS (Netherlands)

Evers, S.; Achten, P.M.; Plasmeijer, M.J.; Loidl, H.W.

Forms are parts of a graphical user interface (GUI) that show a set of values and allow the user to update them. The declarative form construction library FunctionalForms is extended with disjoint form combinators to capture some common patterns in which the form structure expresses a choice. We

Predicting glass-forming compositions in the Al-La and Al-La-Ni systems

International Nuclear Information System (INIS)

Gargarella, P.; de Oliveira, M.F.; Kiminami, C.S.; Pauly, S.; Kuehn, U.; Bolfarini, C.; Botta, W.J.; Eckert, J.

2011-01-01

Research highlights: → The glass-forming ability of the Al-La and Al-La-Ni systems was studied using the λ* and the λ.Δe criteria. → Both criteria predicted with just 1% at. of error the best glass-former verified so far in the Al-La system. → Four new glass-former compositions could be predicted in the Al-La-Ni system using the λ.Δe criterion. → The best glass-former reported so far in the Al-La-Ni system was found. - Abstract: In this work, a criterion considering the topological instability (λ) and the differences in the electronegativity of the constituent elements (Δe) was applied to the Al-La and Al-Ni-La systems in order to predict the best glass-forming compositions. The results were compared with literature data and with our own experimental data for the Al-La-Ni system. The alloy described in the literature as the best glass former in the Al-La system is located near the point with local maximum for the λ.Δe criterion. A good agreement was found between the predictions of the λ.Δe criterion and literature data in the Al-La-Ni system, with the region of the best glass-forming ability (GFA) and largest supercooled liquid region (ΔT x ) coinciding with the best compositional region for amorphization indicated by the λ.Δe criterion. Four new glassy compositions were found in the Al-La-Ni system, with the best predicted composition presenting the best glass-forming ability observed so far for this system. Although the λ.Δe criterion needs further refinements for completely describe the glass-forming ability in the Al-La and Al-La-Ni systems, the results demonstrated that this criterion is a good tool to predict new glass-forming compositions.

Note: Experimental observation of nano-channel pattern in light sheet laser interference nanolithography system

Energy Technology Data Exchange (ETDEWEB)

Mohan, Kavya; Mondal, Partha Pratim, E-mail: partha@iap.iisc.ernet.in [Nanobioimaging Laboratory, Department of Instrumentation and Applied Physics, Indian Institute of Science, Bangalore 560012 (India)

2016-06-15

We experimentally observed nano-channel-like pattern in a light-sheet based interference nanolithography system. The optical system created nano-channel-like patterned illumination. Coherent counter-propagating light sheets are made to interfere at and near geometrical focus along the propagation z-axis. This results in the formation of nano-channel-like pattern (of size ≈ 300 nm and inter-channel periodicity of ≈337.5 nm) inside the sample due to constructive and destructive interference. In addition, the technique has the ability to generate large area patterning using larger light-sheets. Exciting applications are in the broad field of nanotechnology (nano-electronics and nano-fluidics).

Stability of Nonlinear Wave Patterns to the Bipolar Vlasov-Poisson-Boltzmann System

Science.gov (United States)

Li, Hailiang; Wang, Yi; Yang, Tong; Zhong, Mingying

2018-04-01

The main purpose of the present paper is to investigate the nonlinear stability of viscous shock waves and rarefaction waves for the bipolar Vlasov-Poisson-Boltzmann (VPB) system. To this end, motivated by the micro-macro decomposition to the Boltzmann equation in Liu and Yu (Commun Math Phys 246:133-179, 2004) and Liu et al. (Physica D 188:178-192, 2004), we first set up a new micro-macro decomposition around the local Maxwellian related to the bipolar VPB system and give a unified framework to study the nonlinear stability of the basic wave patterns to the system. Then, as applications of this new decomposition, the time-asymptotic stability of the two typical nonlinear wave patterns, viscous shock waves and rarefaction waves are proved for the 1D bipolar VPB system. More precisely, it is first proved that the linear superposition of two Boltzmann shock profiles in the first and third characteristic fields is nonlinearly stable to the 1D bipolar VPB system up to some suitable shifts without the zero macroscopic mass conditions on the initial perturbations. Then the time-asymptotic stability of the rarefaction wave fan to compressible Euler equations is proved for the 1D bipolar VPB system. These two results are concerned with the nonlinear stability of wave patterns for Boltzmann equation coupled with additional (electric) forces, which together with spectral analysis made in Li et al. (Indiana Univ Math J 65(2):665-725, 2016) sheds light on understanding the complicated dynamic behaviors around the wave patterns in the transportation of charged particles under the binary collisions, mutual interactions, and the effect of the electrostatic potential forces.

AFOCAL SYSTEMS FORMED BY MIRROR OFF-AXIS PARABOLOID

Directory of Open Access Journals (Sweden)

N. K. Artiukhina

2017-01-01

Full Text Available Mirror systems make it possible to reduce device dimensions and its weight while preserving high input aperture and these systems are characterized by a number of other advantages. Their significant disadvantage is a central screening of an entrance pupil that leads to lower image quality. The paper contains description of the investigations on afocal systems formed by eccentrically cut-out mirror paraboloids (off-axis mirrors where aperture diaphragm is displaced in the meridian plane for a defined value and a central field point is located on the optical axis. The canonic Mersenne systems are accepted as base schemas (modules for these compositions. The paper considers two types of such systems: visible increases – Г > 0 and Г < 0. Algorithms for calculation of centered afocal systems with two and four reflections have been written in the paper and the systems are free from spherical aberration, coma, astigmatism when an input pupil is located in superimposed focal planes of all parabolic mirrors. An aberration in curvature image has been additionally corrected in three-mirror quart-parabolic scheme which is a combination of two classical telescopic Mersenne systems. The paper presents schemes and calculation results. Two-mirror schemes with non-screened input pupil have been studied in the paper and in this case all the system remains centered and an aperture diaphragm is decentered for the distance Cm which is commensurable with the diaphragm size. The paper contains description of the investigated afocal schemes with four reflections from off-axis mirror paraboloids, a prepared algorithm for calculation, the obtained formulas for making combination of canonic afocal systems formed by two mirrors. Computer simulation in software environment Opal and Zemax has been carried out in the paper. Basic description has been prepared while using two alternative methods for the class of decentered systems and aberration characteristics and

Audit, Control and Monitoring Design Patterns (ACMDP for Autonomous Robust Systems (ARS

Directory of Open Access Journals (Sweden)

C. Trad

2008-11-01

Full Text Available This paper proposes the Audit, Control and Monitoring Design Patterns (ACMDP for building Autonomous and Robust Systems (ARS such as Mobile Robot Systems (MRS. These patterns are also applicable to other Mission Critical and Complex Systems (MCCS. This paper presents a proposal which will help ARS project managers and engineers design, build and estimate the probability that an ARS will succeed or fail. Furthermore, this proposal offers the possibility to ARS problems with the help of audit, monitoring and controlling components, adjust the project management pathways, and define the problem sources as well as their possible solutions, in order to deliver an ARS or an MRS.

Huitzoctli: A system to design Control Rod Pattern for BWR's using a hybrid method

International Nuclear Information System (INIS)

Castillo, Alejandro; Ortiz-Servin, Juan Jose; Perusquia, Raul; Morales, Luis B.

2011-01-01

Highlights: → The system was developed to design Control Rod Patterns for Boiling Water Reactors. → The critical reactor core and the thermal limits were fulfilled in all tested cases. → The Fuel Loading Pattern remains without changes during the iterative process. → The system uses the heuristics techniques: Scatter Search and Tabu Search. → The effective multiplication factor k eff at the EOC was improved in all tested cases. - Abstract: Huitzoctli system was developed to design Control Rod Patterns for Boiling Water Reactors (BWR). The main idea is to obtain a Control Rod Pattern under the following considerations: (a) the critical reactor core state is satisfied, (b) the axial power distribution must be adjusted to a target axial power distribution proposal, and (c) the maximum Fraction of Critical Power Ratio (MFLCPR), the maximum Fraction of Linear Power Density (FLPD) and the maximum Fraction of Average Planar Power Density (MPGR) must be fulfilled. Those parameters were obtained using the 3D CM-PRESTO code. In order to decrease the problem complexity, Control Cell Core load strategy was implemented; in the same way, intermediate axial positions and core eighth symmetry were took into account. In this work, the cycle length was divided in 12 burnup steps. The Fuel Loading Pattern is an input data and it remains without changes during the iterative process. The Huitzoctli system was developed to use the combinatorial heuristics techniques Scatter Search and Tabu Search. The first one was used as a global search method and the second one as a local search method. The Control Rod Patterns obtained with the Huitzoctli system were compared to other Control Rod Patterns designs obtained with other optimization techniques, under the same operating conditions. The results show a good performance of the system. In all cases the thermal limits were satisfied, and the axial power distribution was adjusted to the target axial power distribution almost

Isolated Mass-Forming IgG4-Related Cholangitis as an Initial Clinical Presentation of Systemic IgG4-Related Disease

Directory of Open Access Journals (Sweden)

Seokhwi Kim

2016-07-01

Full Text Available IgG4-related disease (IgG4-RD may involve multiple organs. Although it usually presents as diffuse organ involvement, localized mass-forming lesions have been occasionally encountered in pancreas. However, the same pattern has been seldom reported in biliary tract. A 61-year-old male showed a hilar bile duct mass with multiple enlarged lymph nodes in imaging studies and he underwent trisectionectomy under impression of cholangiocarcinoma. Gross examination revealed a mass-like lesion around hilar bile duct. Histopathologically, dense lymphoplasmacytic infiltration and storiform fibrosis were identified without evidence of malignancy. Immunohistochemical stain demonstrated rich IgG4-positive plasma cell infiltration. Follow-up imaging studies disclosed multiple enlarged lymph nodes with involvement of pancreas and perisplenic soft tissue. The lesions have been significantly reduced after steroid treatment, which suggests multi-organ involvement of systemic IgG4-RD. Here, we report an unusual localized mass-forming IgG4-related cholangitis as an initial presentation of IgG4-RD, which was biliary manifestation of systemic IgG4-related autoimmune disease.

Plagioclase Textures and Zoning Patterns in the Miocene Dowdy Ranch Andesite, Central California Coast Ranges: Implications for Open and Closed System Behavior in Magmatic Systems

Science.gov (United States)

Bavishi, D. K.; Metzger, E. P.; Miller, J. S.

2010-12-01

The Miocene Dowdy Range Andesite (DRA) of the Central California Coast Ranges is part of a northwestward-younging sequence of volcanic rocks that were apparently formed by northward movement of the Mendocino triple junction, formation of a slab window, and infilling by asthenospheric mantle. The highly porphyritic andesite contains plagioclase phenocrysts with a wide array of disequilibrium textures and zoning patterns, providing an opportunity to reconstruct andesite-forming processes in a tectonic environment that evolved from subduction to transform motion. The DRA encloses metasedimentary, granulitic, and gabbroic xenoliths (described elsewhere) and displays arc-like trace element chemistry. It features glomeroporphyritic, intersertal and hyalopilitic textures with plagioclase as the dominant phase both as phenocrysts and in the groundmass. Other groundmass minerals include orthopyroxene, clinopyroxene, and ilmenite. Plagioclase exhibits normal, reverse, oscillatory and patchy zoning patterns and sieve and sponge textures, with several populations of plagioclase crystals observed on the scale of a single thin section. The presence of abundant quartz xenocrysts rimmed by augite and absence of mafic enclaves suggest that incorporation of crustal material played an important role in forming the andesite. Preliminary examination of back-scattered electron images and electron microprobe analysis of zoned plagioclase shows both concordant and discordant relationships between An and FeO, suggesting that the andesite was formed by a combination of open and closed system magmatic processes. Plagioclase cores vary from An 45-65%. Clear rims surrounding spongy zones are common and show abrupt and significant (~10-50% An and 5-20% FeO) increases in both An and FeO, as expected for magma recharge by more mafic magma. Clear rim compositions are consistent from sample to sample, suggesting that the phenocrysts experienced a common history during later stages of

Hybrid foundry patterns of bevel gears

Directory of Open Access Journals (Sweden)

Budzik G.

2007-01-01

Full Text Available Possibilities of making hybrid foundry patterns of bevel gears for investment casting process are presented. Rapid prototyping of gears with complex tooth forms is possible with the use of modern methods. One of such methods is the stereo-lithography, where a pattern is obtained as a result of resin curing with laser beam. Patterns of that type are applicable in precision casting. Removing of stereo-lithographic pattern from foundry mould requires use of high temperatures. Resin burning would generate significant amounts of harmful gases. In case of a solid stereo-lithographic pattern, the pressure created during gas burning may cause the mould to crack. A gas volume reduction may be achieved by using patterns of honeycomb structure. However, this technique causes a significant worsening of accuracy of stereo-lithographic patterns in respect of their dimensions and shape. In cooperation with WSK PZL Rzeszów, the Machine Design Department of Rzeszow University of Technology carried out research on the design of hybrid stereo-lithographic patterns. Hybrid pattern consists of a section made by stereo-lithographic process and a section made of casting wax. The latter material is used for stereo-lithographic pattern filling and for mould gating system. The hybrid pattern process consists of two stages: wax melting and then the burn-out of stereolithographic pattern. Use of hybrid patterns reduces the costs of production of stereolithographic patterns. High dimensional accuracy remains preserved in this process.

Formulation of the moiré patterns formed by superimposing of gratings consisting topological defects: moiré technique as a tool in singular optics detections

International Nuclear Information System (INIS)

Rasouli, Saifollah; Yeganeh, Mohammad

2015-01-01

The use of moiré pattern of superimposition of linear forked gratings (LFGs) and Fresnel zone plates (ZPs) has already been reported for study of different physical effects. In spite of a considerable number of applications, there is no comprehensive formulation for this kind of moiré pattern. In this work, we introduce a new family of ZPs containing topological defects that we named defected ZP (DZP) and we present a very simple, uniform, and comprehensive formulation for the moiré pattern of superimposition of two LFGs, two DZPs, and superimposition of an LFG on a DZP, using the reciprocal vector approach. For the case of the two LFGs superimposition, we show that the resulting moiré pattern has a starlike shape or is a large-scale LFG pattern. In the case in which two DZPs are superimposed, we show that the resulting moiré pattern has three general forms: large-scale DZP pattern, starlike pattern, and large-scale LFG pattern. In the superimposition of an LFG on a DZP, in special conditions a new spiral ZP having a topological defect is produced in which its defect number related to the superimposed gratings structures. The presented formulation has potential applications in singular optics measurements. (paper)

The mechanism of Turing pattern formation in a positive feedback system with cross diffusion

International Nuclear Information System (INIS)

Yang, Xiyan; Liu, Tuoqi; Zhang, Jiajun; Zhou, Tianshou

2014-01-01

In this paper, we analyze a reaction–diffusion (R–D) system with a double negative feedback loop and find cases where self diffusion alone cannot lead to Turing pattern formation but cross diffusion can. Specifically, we first derive a set of sufficient conditions for Turing instability by performing linear stability analysis, then plot two bifurcation diagrams that specifically identify Turing regions in the parameter phase plane, and finally numerically demonstrate representative Turing patterns according to the theoretical predictions. Our analysis combined with previous studies actually implies an interesting fact that Turing patterns can be generated not only in a class of monostable R–D systems where cross diffusion is not necessary but also in a class of bistable R–D systems where cross diffusion is necessary. In addition, our model would be a good candidate for experimentally testing Turing pattern formation from the viewpoint of synthetic biology. (paper)

Patterns for election of active computing nodes in high availability distributed data acquisition systems

International Nuclear Information System (INIS)

Nair, Preetha; Padmini, S.; Diwakar, M.P.; Gohel, Nilesh

2013-01-01

Computer based systems for power plant and research reactors are expected to have high availability. Redundancy is a common approach to improve the availability of a system. In redundant configuration the challenge is to select one node as active, and in case of failure of current active node provide automatic fast switchover by electing another node to function as active and restore normal operation. Additional constraints include: exactly one node should be elected as active in an n-way redundant architecture. This paper discusses various high availability configurations developed by Electronics Division and deployed in power and research reactors and patterns followed to elect active nodes of distributed data acquisition systems. The systems are categorized into two: Active/Passive where changeover takes effect only on the failure of Active node, and Active/Active, where changeover is effective in alternate cycles. A novel concept of priority driven state based Active (Master) node election pattern is described for Active/Passive systems which allows multiple redundancy and dynamic election of single master. The paper also discusses the Active/Active pattern, which uncovers failure early by activating all the nodes alternatively in a redundant system. This pattern can be extended to multiple redundant nodes. (author)

Pattern Transitions in Bacterial Oscillating System under Nanofluidic Confinement

Science.gov (United States)

Shen, Jie-Pan; Chou, Chia-Fu

2011-03-01

Successful binary fission in E. coli relies on remarkable oscillatory behavior of the MinCDE protein system to determine the exact division site. The most favorable models to explain this fascinating spatiotemporal regulation on dynamic MinDE pattern formation in cells are based on reaction-diffusion scenario. Although not fully understood, geometric factors caused by bacterial morphology play a crucial role in MinDE dynamics. In the present study, bacteria were cultured, confined and reshaped in various micro/nanofluidic devices, to mimic either curvature changes of cell peripherals. Fluorescence imaging was utilized to detail the mode transitions in multiple MinDE patterns. The understanding of the physics in multiple pattern formations is further complemented via in silico modeling. The study synergizes the join merits of in vivo, in vitro and in silico approaches, to grasp the insight of stochastic dynamics inherited from the noisy mesoscopic biophysics. We acknowledge support from the Foresight Project, Academia Sinica.

Ahmad's NPRT System: A Practical Innovation for Documenting Male Pattern Baldness

OpenAIRE

Ahmad, Muhammad

2016-01-01

Various classifications for male pattern baldness are mentioned in the literature. The 'Norwood's classification is the most commonly used but it has certain limitations. The new system has included 'three' extra features which were not mentioned in any other classification. It provides an opportunity to document the full and correct picture while documenting male pattern baldness. It also aids in assessing the treatment for various degrees of baldness.

Ahmad's NPRT system: A practical innovation for documenting male pattern baldness

Directory of Open Access Journals (Sweden)

Muhammad Ahmad

2016-01-01

Full Text Available Various classifications for male pattern baldness are mentioned in the literature. The 'Norwood's classification is the most commonly used but it has certain limitations. The new system has included 'three' extra features which were not mentioned in any other classification. It provides an opportunity to document the full and correct picture while documenting male pattern baldness. It also aids in assessing the treatment for various degrees of baldness.

Active ultrasound pattern injection system (AUSPIS for interventional tool guidance.

Directory of Open Access Journals (Sweden)

Xiaoyu Guo

Full Text Available Accurate tool tracking is a crucial task that directly affects the safety and effectiveness of many interventional medical procedures. Compared to CT and MRI, ultrasound-based tool tracking has many advantages, including low cost, safety, mobility and ease of use. However, surgical tools are poorly visualized in conventional ultrasound images, thus preventing effective tool tracking and guidance. Existing tracking methods have not yet provided a solution that effectively solves the tool visualization and mid-plane localization accuracy problem and fully meets the clinical requirements. In this paper, we present an active ultrasound tracking and guiding system for interventional tools. The main principle of this system is to establish a bi-directional ultrasound communication between the interventional tool and US imaging machine within the tissue. This method enables the interventional tool to generate an active ultrasound field over the original imaging ultrasound signals. By controlling the timing and amplitude of the active ultrasound field, a virtual pattern can be directly injected into the US machine B mode display. In this work, we introduce the time and frequency modulation, mid-plane detection, and arbitrary pattern injection methods. The implementation of these methods further improves the target visualization and guiding accuracy, and expands the system application beyond simple tool tracking. We performed ex vitro and in vivo experiments, showing significant improvements of tool visualization and accurate localization using different US imaging platforms. An ultrasound image mid-plane detection accuracy of ±0.3 mm and a detectable tissue depth over 8.5 cm was achieved in the experiment. The system performance is tested under different configurations and system parameters. We also report the first experiment of arbitrary pattern injection to the B mode image and its application in accurate tool tracking.

Analysis of image plane's Illumination in Image-forming System

International Nuclear Information System (INIS)

Duan Lihua; Zeng Yan'an; Zhang Nanyangsheng; Wang Zhiguo; Yin Shiliang

2011-01-01

In the detection of optical radiation, the detecting accuracy is affected by optic power distribution of the detector's surface to a large extent. In addition, in the image-forming system, the quality of the image is greatly determined by the uniformity of the image's illumination distribution. However, in the practical optical system, affected by the factors such as field of view, false light and off axis and so on, the distribution of the image's illumination tends to be non uniform, so it is necessary to discuss the image plane's illumination in image-forming systems. In order to analyze the characteristics of the image-forming system at a full range, on the basis of photometry, the formulas to calculate the illumination of the imaging plane have been summarized by the numbers. Moreover, the relationship between the horizontal offset of the light source and the illumination of the image has been discussed in detail. After that, the influence of some key factors such as aperture angle, off-axis distance and horizontal offset on illumination of the image has been brought forward. Through numerical simulation, various theoretical curves of those key factors have been given. The results of the numerical simulation show that it is recommended to aggrandize the diameter of the exit pupil to increase the illumination of the image. The angle of view plays a negative role in the illumination distribution of the image, that is, the uniformity of the illumination distribution can be enhanced by compressing the angle of view. Lastly, it is proved that telecentric optical design is an effective way to advance the uniformity of the illumination distribution.

Direct generation of abruptly focusing vortex beams using a 3/2 radial phase-only pattern.

Science.gov (United States)

Davis, Jeffrey A; Cottrell, Don M; Zinn, Jonathan M

2013-03-20

Abruptly focusing Airy beams have previously been generated using a radial cubic phase pattern that represents the Fourier transform of the Airy beam. The Fourier transform of this pattern is formed using a system length of 2f, where f is the focal length of the Fourier transform lens. In this work, we directly generate these abruptly focusing Airy beams using a 3/2 radial phase pattern encoded onto a liquid crystal display. The resulting optical system is much shorter. In addition, we can easily produce vortex patterns at the focal point of these beams. Experimental results match theoretical predictions.

Patterns of Dynamics : in Honour of Bernold Fiedler's 60th Birthday

CERN Document Server

Hell, Juliette; Sandstede, Björn; Scheel, Arnd

2017-01-01

Theoretical advances in dynamical-systems theory and their applications to pattern-forming processes in the sciences and engineering are discussed in this volume that resulted from the conference Patterns in Dynamics held in honor of Bernold Fiedler, in Berlin, July 25-29, 2016.The contributions build and develop mathematical techniques, and use mathematical approaches for prediction and control of complex systems. The underlying mathematical theories help extract structures from experimental observations and, conversely, shed light on the formation, dynamics, and control of spatio-temporal patterns in applications. Theoretical areas covered include geometric analysis, spatial dynamics, spectral theory, traveling-wave theory, and topological data analysis; also discussed are their applications to chemotaxis, self-organization at interfaces, neuroscience, and transport processes. .

Pattern-recognition software detecting the onset of failures in complex systems

International Nuclear Information System (INIS)

Mott, J.; King, R.

1987-01-01

A very general mathematical framework for embodying learned data from a complex system and combining it with a current observation to estimate the true current state of the system has been implemented using nearly universal pattern-recognition algorithms and applied to surveillance of the EBR-II power plant. In this application the methodology can provide signal validation and replacement of faulty signals on a near-real-time basis for hundreds of plant parameters. The mathematical framework, the pattern-recognition algorithms, examples of the learning and estimating process, and plant operating decisions made using this methodology are discussed. The entire methodology has been reduced to a set of FORTRAN subroutines which are small, fast, robust and executable on a personal computer with a serial link to the system's data acquisition computer, or on the data acquisition computer itself

Pediatric scleroderma: systemic or localized forms.

Science.gov (United States)

Torok, Kathryn S

2012-04-01

Pediatric scleroderma includes 2 major groups of clinical entities, systemic sclerosis (SSc) and localized scleroderma (LS). Although both share a common pathophysiology, their clinical manifestations differ. LS is typically confined to the skin and underlying subcutis, with up to a quarter of patients showing extracutaneous disease manifestations such as arthritis and uveitis. Vascular, cutaneous, gastrointestinal, pulmonary, and musculoskeletal involvement are most commonly seen in children with SSc. Treatment of both forms targets the active inflammatory stage and halts disease progression; however, progress needs to be made toward the development of more effective antifibrotic therapy to help reverse disease damage. Copyright © 2012 Elsevier Inc. All rights reserved.

Transformation processes influencing physico-chemical forms of radionuclides and trace elements in natural water systems

International Nuclear Information System (INIS)

Salbu, B.; Riise, G.; Oughton, D.H.

1995-01-01

In order to assess short and long term consequences of radionuclides and trace elements introduced to aquatic systems, knowledge on source terms, key factors and key processes influencing the speciation is essential. The mobility, bioavailability and subsequent transfer into food chains depend on the physico-chemical forms on radionuclides and trace metals. In addition, transformation processes and especially the interaction with natural organic matter (NOM) influences the distribution pattern. Furthermore, the prevailing climate conditions, e.g. episodic events and temperature are vital for fluxes and for the kinetics of the transformation processes. In the present work processes in catchments and processes associated with acidification, episodic events, climate conditions (temperature) and mixing zone phenomena influencing the speciation of radionuclides and trace metals are highlighted. These processes should be highly relevant for assessing far field consequences of radionuclides potentially released from disposal sites. (authors). 21 refs., 8 figs., 1 tab

Patterns of structural - qualitative changes in the development of complex systems

OpenAIRE

S Holtier

1992-01-01

This paper is an attempt to outline, in an emancipatory fashion, a framework of thinking to deal with the general patterns of development. As decision problems in society are increasingly of a developmental nature compared with simple performance in equilibrium systems, the author pleads in favour of an operational approach centred on 'the algebra' of structural change. It is argued that for describing and understanding development patterns better we need a proper 'structural' and 'ontologica...

Pattern-recognition system application to EBR-II plant-life extension

International Nuclear Information System (INIS)

King, R.W.; Radtke, W.H.; Mott, J.E.

1988-01-01

A computer-based pattern-recognition system, the System State Analyzer (SSA), is being used as part of the EBR-II plant-life extension program for detection of degradation and other abnormalities in plant systems. The SSA is used for surveillance of the EBR-II primary system instrumentation, primary sodium pumps, and plant heat balances. Early results of this surveillance indicate that the SSA can detect instrumentation degradation and system performance degradation over varying time intervals, and can provide derived signal values to replace signals from failed critical sensors. These results are being used in planning for extended-life operation of EBR-II

Evo-devo and accounting for Darwin's endless forms.

Science.gov (United States)

Brakefield, Paul M

2011-07-27

Evo-devo has led to dramatic advances in our understanding of how the processes of development can contribute to explaining patterns of evolutionary diversification that underlie the endless forms of animal life on the Earth. This is increasingly the case not only for the origins of evolutionary novelties that permit new functions and open up new adaptive zones, but also for the processes of evolutionary tinkering that occur within the subsequent radiations of related species. Evo-devo has time and again yielded spectacular examples of Darwin's notions of common ancestry and of descent with modification. It has also shown that the evolution of endless forms is more about the evolution of the regulatory machinery of ancient genes than the origin and elaboration of new genes. Evolvability, especially with respect to the capacity of a developmental system to evolve and to generate the variation in form for natural selection to screen, has become a pivotal focus of evo-devo. As a consequence, a balancing of the concept of endless forms in morphospace with a greater awareness of the potential for developmental constraints and bias is becoming more general. The prospect of parallel horizons opening up for the evolution of behaviour is exciting; in particular, does Sean Carroll's phrase referring to old genes learning new tricks in the evolution of endless forms apply equally as well to patterns of diversity and disparity in behavioural trait-space?

Localization Using Magnetic Patterns for Autonomous Mobile Robot

Directory of Open Access Journals (Sweden)

Won Suk You

2014-03-01

Full Text Available In this paper, we present a method of localization using magnetic landmarks. With this method, it is possible to compensate the pose error (xe, ye, θe of a mobile robot correctly and localize its current position on a global coordinate system on the surface of a structured environment with magnetic landmarks. A set of four magnetic bars forms total six different patterns of landmarks and these patterns can be read by the mobile robot with magnetic hall sensors. A sequential motion strategy for a mobile robot is proposed to find the geometric center of magnetic landmarks by reading the nonlinear magnetic field. The mobile robot first moves into the center region of the landmark where it can read the magnetic pattern, after which tracking and global localization can be easily achieved by recognizing the patterns of neighboring landmarks. Experimental results show the effectiveness of the sequential motion strategy for estimating the center of the first encountered landmark as well as the performance of tracking and global localization of the proposed system.

The neuro-muscular system in cercaria with different patterns of locomotion.

Science.gov (United States)

Tolstenkov, Oleg O; Prokofiev, Vladimir V; Terenina, Nadezhda B; Gustafsson, Margaretha K S

2011-05-01

The neuro-muscular system (NMS) of cercariae with different swimming patterns was studied with immunocytochemical methods and confocal scanning laser microscopy. Specimens of the continuously swimming Cercaria parvicaudata, Maritrema subdolum and Himasthla elongata were compared with specimens of the intermittently swimming Cryptocotyle lingua and the attached Podocotyle atomon. The patterns of F-actin in the musculature, 5-HT immunoreactive (-IR), FMRFamide-IR neuronal elements, α-tubulin-IR elements in the nervous and sensory systems and DAPI-stained nuclei were investigated. The general plan of the NMS was similar in all cercariae studied. No major structural differences in the patterns of muscle fibres were observed. However, in the tail of C. lingua, transverse muscle fibres connecting the bands of longitudinal muscles were found. No major structural differences in the 5-HT- or FMRFamide-IR nervous systems were observed. The number of 5-HT-IR neurones in the cercarial bodies varied between 12 and 14. The number and distribution of the α-tubulin-IR processes on the cercarial bodies and tails differed from each other. The relation between the number and structure of the α-tubulin-IR processes and the host finding strategy of the cercariae is discussed. A detailed schematic picture of the NMS in the tails of C. lingua and M. subdolum is presented.

High-speed imaging of blood splatter patterns

Energy Technology Data Exchange (ETDEWEB)

McDonald, T.E.; Albright, K.A.; King, N.S.P.; Yates, G.J. (Los Alamos National Lab., NM (United States)); Levine, G.F. (California Dept. of Justice, Sacramento, CA (United States). Bureau of Forensic Services)

1993-01-01

The interpretation of blood splatter patterns is an important element in reconstructing the events and circumstances of an accident or crime scene. Unfortunately, the interpretation of patterns and stains formed by blood droplets is not necessarily intuitive and study and analysis are required to arrive at a correct conclusion. A very useful tool in the study of blood splatter patterns is high-speed photography. Scientists at the Los Alamos National Laboratory, Department of Energy (DOE), and Bureau of Forensic Services, State of California, have assembled a high-speed imaging system designed to image blood splatter patterns. The camera employs technology developed by Los Alamos for the underground nuclear testing program and has also been used in a military mine detection program. The camera uses a solid-state CCD sensor operating at approximately 650 frames per second (75 MPixels per second) with a microchannel plate image intensifier that can provide shuttering as short as 5 ns. The images are captured with a laboratory high-speed digitizer and transferred to an IBM compatible PC for display and hard copy output for analysis. The imaging system is described in this paper.

High-speed imaging of blood splatter patterns

Energy Technology Data Exchange (ETDEWEB)

McDonald, T.E.; Albright, K.A.; King, N.S.P.; Yates, G.J. [Los Alamos National Lab., NM (United States); Levine, G.F. [California Dept. of Justice, Sacramento, CA (United States). Bureau of Forensic Services

1993-05-01

The interpretation of blood splatter patterns is an important element in reconstructing the events and circumstances of an accident or crime scene. Unfortunately, the interpretation of patterns and stains formed by blood droplets is not necessarily intuitive and study and analysis are required to arrive at a correct conclusion. A very useful tool in the study of blood splatter patterns is high-speed photography. Scientists at the Los Alamos National Laboratory, Department of Energy (DOE), and Bureau of Forensic Services, State of California, have assembled a high-speed imaging system designed to image blood splatter patterns. The camera employs technology developed by Los Alamos for the underground nuclear testing program and has also been used in a military mine detection program. The camera uses a solid-state CCD sensor operating at approximately 650 frames per second (75 MPixels per second) with a microchannel plate image intensifier that can provide shuttering as short as 5 ns. The images are captured with a laboratory high-speed digitizer and transferred to an IBM compatible PC for display and hard copy output for analysis. The imaging system is described in this paper.

The quadratic-form identity for constructing the Hamiltonian structure of integrable systems

International Nuclear Information System (INIS)

Guo Fukui; Zhang Yufeng

2005-01-01

A usual loop algebra, not necessarily the matrix form of the loop algebra A-tilde n-1 , is also made use of for constructing linear isospectral problems, whose compatibility conditions exhibit a zero-curvature equation from which integrable systems are derived. In order to look for the Hamiltonian structure of such integrable systems, a quadratic-form identity is created in the present paper whose special case is just the trace identity; that is, when taking the loop algebra A-tilde 1 , the quadratic-form identity presented in this paper is completely consistent with the trace identity

Stochastic Modeling of Usage Patterns in a Web-Based Information System.

Science.gov (United States)

Chen, Hui-Min; Cooper, Michael D.

2002-01-01

Uses continuous-time stochastic models, mainly based on semi-Markov chains, to derive user state transition patterns, both in rates and in probabilities, in a Web-based information system. Describes search sessions from transaction logs of the University of California's MELVYL library catalog system and discusses sequential dependency. (Author/LRW)

Wake patterns behind boulders in the rings of Saturn

International Nuclear Information System (INIS)

Brattli, A.; Havnes, O.; Melandsoe, F.

2002-01-01

The flow of charged dust around an electrically charged boulder moving through an environment thought to be typical of planatery rings is studied. As the boulder moves through the ring dust it will excite a V-shaped Mach cone pattern of a form and complexity which varies significantly with boulder size, relative velocity between the boulder and the dust, and with dust plasma conditions. Parameters relevant to the Saturnian ring system are used to compute examples which demonstrate the change in Mach cone patterns with the relevant parameters. Shortcomings of the model are discussed and ways to improve the calculations of Mach cone patterns are pointed out

Interactions between motion and form processing in the human visual system

OpenAIRE

Mather, G.; Pavan, A.; Bellacosa Marotti, R.; Campana, G.; Casco, C.

2013-01-01

The predominant view of motion and form processing in the human visual system assumes that these two attributes are handled by separate and independent modules. Motion processing involves filtering by direction-selective sensors, followed by integration to solve the aperture problem. Form processing involves filtering by orientation-selective and size-selective receptive fields, followed by integration to encode object shape. It has long been known that motion signals can influence form proce...

Simultaneous Patterning of Independent Metal/Metal Oxide Multi-Layer Films Using Two-Tone Photo-Acid Generating Compound Systems

Directory of Open Access Journals (Sweden)

Hideo Honma

2012-10-01

Full Text Available (1 The photo-induced solubility and positive-tone direct photo-patterning of iron, copper and lanthanides chelated with 4-(2-nitrobenzyloxycarbonylcatechol (NBOC or 4-(6-nitroveratryloxycarbonylcatechol (NVOC was investigated. Photo-patterning of iron, copper, cerium, samarium, europium, terbium, dysprosium, holmium, erbium and lutetium complexes was accomplished. Continuous films were formed by the pyrolysis of metal complex films at 500 °C. (2 Based on the difference in the photo-reaction excitation wavelength profile of NBOC and NVOC complexes, a short and simple method for simultaneous micro-patterning of two independent films on each side of a transparent glass substrate was developed. Using the developed procedure, indium tin oxide and/or titanium oxide films were formed on each side of a quartz substrate without use of resist or etching.

Integrable couplings of relativistic Toda lattice systems in polynomial form and rational form, their hierarchies and bi-Hamiltonian structures

Energy Technology Data Exchange (ETDEWEB)

Xu Xixiang [College of Science, Shandong University of Science and Technology, Qingdao 266510 (China)], E-mail: xixiang_xu@yahoo.com.cn

2009-10-02

Integrable couplings of relativistic Toda lattice systems in polynomial form and rational form, and their hierarchies, are derived from a four-by-four discrete matrix eigenvalue problem. The bi-Hamiltonian structure for every integrable coupling in the two hierarchies obtained is established by means of the discrete variational identity. Ultimately, Liouvolle integrability of the obtained integrable couplings is demonstrated.

Stochastic Turing Patterns: Analysis of Compartment-Based Approaches

KAUST Repository

Cao, Yang; Erban, Radek

2014-01-01

© 2014, Society for Mathematical Biology. Turing patterns can be observed in reaction-diffusion systems where chemical species have different diffusion constants. In recent years, several studies investigated the effects of noise on Turing patterns and showed that the parameter regimes, for which stochastic Turing patterns are observed, can be larger than the parameter regimes predicted by deterministic models, which are written in terms of partial differential equations (PDEs) for species concentrations. A common stochastic reaction-diffusion approach is written in terms of compartment-based (lattice-based) models, where the domain of interest is divided into artificial compartments and the number of molecules in each compartment is simulated. In this paper, the dependence of stochastic Turing patterns on the compartment size is investigated. It has previously been shown (for relatively simpler systems) that a modeler should not choose compartment sizes which are too small or too large, and that the optimal compartment size depends on the diffusion constant. Taking these results into account, we propose and study a compartment-based model of Turing patterns where each chemical species is described using a different set of compartments. It is shown that the parameter regions where spatial patterns form are different from the regions obtained by classical deterministic PDE-based models, but they are also different from the results obtained for the stochastic reaction-diffusion models which use a single set of compartments for all chemical species. In particular, it is argued that some previously reported results on the effect of noise on Turing patterns in biological systems need to be reinterpreted.

Stochastic Turing Patterns: Analysis of Compartment-Based Approaches

KAUST Repository

Cao, Yang

2014-11-25

© 2014, Society for Mathematical Biology. Turing patterns can be observed in reaction-diffusion systems where chemical species have different diffusion constants. In recent years, several studies investigated the effects of noise on Turing patterns and showed that the parameter regimes, for which stochastic Turing patterns are observed, can be larger than the parameter regimes predicted by deterministic models, which are written in terms of partial differential equations (PDEs) for species concentrations. A common stochastic reaction-diffusion approach is written in terms of compartment-based (lattice-based) models, where the domain of interest is divided into artificial compartments and the number of molecules in each compartment is simulated. In this paper, the dependence of stochastic Turing patterns on the compartment size is investigated. It has previously been shown (for relatively simpler systems) that a modeler should not choose compartment sizes which are too small or too large, and that the optimal compartment size depends on the diffusion constant. Taking these results into account, we propose and study a compartment-based model of Turing patterns where each chemical species is described using a different set of compartments. It is shown that the parameter regions where spatial patterns form are different from the regions obtained by classical deterministic PDE-based models, but they are also different from the results obtained for the stochastic reaction-diffusion models which use a single set of compartments for all chemical species. In particular, it is argued that some previously reported results on the effect of noise on Turing patterns in biological systems need to be reinterpreted.

Hybrid expert system implementation to determine core reload patterns

International Nuclear Information System (INIS)

Greek, K.J.; Robinson, A.H.

1989-01-01

Determining reactor reload fuel patterns is a computationally intensive problem solving process for which automation can be of significant benefit. Often much effort is expended in the search for an optimal loading. While any modern programming language could be used to automate solution, the specialized tools of artificial intelligence (AI) are the most efficient means of introducing the fuel management expert's knowledge into the search for an optimum reload pattern. Prior research in pressurized water reactor refueling strategies developed FORTRAN programs that automated an expert's basic knowledge to direct a search for an acceptable minimum peak power loading. The dissatisfaction with maintenance of compiled knowledge in FORTRAN programs has served as the motivation for the development of the SHUFFLE expert system. SHUFFLE is written in Smalltalk, an object-oriented programming language, and evaluates loadings as it generates them using a two-group, two-dimensional nodal power calculation compiled in a personal computer-based FORTRAN. This paper reviews the object-oriented representation developed to solve the core reload problem with an expert system tool and its operating prototype, SHUFFLE

Level and pattern of overstory retention influence rates and forms of tree mortality in mature, coniferous forests of the Pacific Northwest, USA

Science.gov (United States)

Lauren S. Urgenson; Charles B. Halpern; Paul D. Anderson

2013-01-01

Mortality of retained trees can compromise the ecological objectives of variable-retention harvest. We used a large-scale experiment replicated at six locations in western Washington and Oregon to examine the influences of retention level (40% vs. 15% of original basal area) and its spatial pattern (aggregated vs.dispersed) on the rate and form of tree mortality for 11...

Discrete-time Calogero-Moser system and Lagrangian 1-form structure

International Nuclear Information System (INIS)

Yoo-Kong, Sikarin; Lobb, Sarah; Nijhoff, Frank

2011-01-01

We study the Lagrange formalism of the (rational) Calogero-Moser (CM) system, both in discrete time and continuous time, as a first example of a Lagrangian 1-form structure in the sense of the recent paper (Lobb and Nijhoff 2009 J. Phys. A: Math. Theor.42 454013). The discrete-time model of the CM system was established some time ago arising as a pole reduction of a semi-discrete version of the Kadomtsev-Petviashvili (KP) equation, and was shown to lead to an exactly integrable correspondence (multivalued map). In this paper, we present the full KP solution based on the commutativity of the discrete-time flows in the two discrete KP variables. The compatibility of the corresponding Lax matrices is shown to lead directly to the relevant closure relation on the level of the Lagrangians. Performing successive continuum limits on both the level of the KP equation and the level of the CM system, we establish the proper Lagrangian 1-form structure for the continuum case of the CM model. We use the example of the three-particle case to elucidate the implementation of the novel least-action principle, which was presented in Lobb and Nijhoff (2009), for the simpler case of Lagrangian 1-forms. (paper)

The generalized Q-S synchronization between the generalized Lorenz canonical form and the Roessler system

International Nuclear Information System (INIS)

Yang Yunqing; Chen Yong

2009-01-01

In this paper, we investigate the generalized Q-S synchronization between the generalized Lorenz canonical form and the Roessler system. Firstly, we transform an arbitrary generalized Lorenz system to the generalized Lorenz canonical form, and the relation between the parameter of the generalized Lorenz system and the parameter of the generalized Lorenz canonical form are shown. Secondly, we extend the scheme present by [Yan ZY. Chaos 2005;15:023902] to study the generalized Q-S synchronization between the generalized Lorenz canonical form and the Roessler system, the more general controller is obtained. By choosing different parameter in the generalized controller obtained here, without much extra effort, we can get the controller of synchronization between the Chen system and the Roessler system, the Lue system and the Roessler system, the classic Lorenz system and the Roessler system, the Hyperbolic Lorenz system and the Roessler system, respectively. Finally, numerical simulations are used to perform such synchronization and verify the effectiveness of the controller.

Attack Pattern Analysis Framework for a Multiagent Intrusion Detection System

Directory of Open Access Journals (Sweden)

Krzysztof Juszczyszyn

2008-08-01

Full Text Available The paper proposes the use of attack pattern ontology and formal framework for network traffic anomalies detection within a distributed multi-agent Intrusion Detection System architecture. Our framework assumes ontology-based attack definition and distributed processing scheme with exchange of communicates between agents. The role of traffic anomalies detection was presented then it has been discussed how some specific values characterizing network communication can be used to detect network anomalies caused by security incidents (worm attack, virus spreading. Finally, it has been defined how to use the proposed techniques in distributed IDS using attack pattern ontology.

Patterns of Force: System Strength, Terrorism and Civil War

DEFF Research Database (Denmark)

Freytag, Andreas; Meierrieks, Daniel; Münch, Angela

2010-01-01

We jointly analyze the genesis of terrorism and civil war, providing a simple conceptual framework to explain why violent opposition groups choose distinct forms of violence (i.e., terrorism and open rebellion). We argue that the distinct modes of violent opposition are chosen by opposition groups...... in response to the strengths and weaknesses of the system they challenge. An empirical test of this hypothesis for 104 countries for 1992 to 2004 indeed shows that the socio-economic strength of a system positively correlates with the likelihood of terrorism, but negatively with the incidence of civil war....... Institutional quality and political participation of opponents reduce the risk of civil war, but do not affect the likelihood of terrorism. We also show that system stability reduces the likelihood of all forms of violent opposition....

Formalization of the classification pattern: survey of classification modeling in information systems engineering.

Science.gov (United States)

Partridge, Chris; de Cesare, Sergio; Mitchell, Andrew; Odell, James

2018-01-01

Formalization is becoming more common in all stages of the development of information systems, as a better understanding of its benefits emerges. Classification systems are ubiquitous, no more so than in domain modeling. The classification pattern that underlies these systems provides a good case study of the move toward formalization in part because it illustrates some of the barriers to formalization, including the formal complexity of the pattern and the ontological issues surrounding the "one and the many." Powersets are a way of characterizing the (complex) formal structure of the classification pattern, and their formalization has been extensively studied in mathematics since Cantor's work in the late nineteenth century. One can use this formalization to develop a useful benchmark. There are various communities within information systems engineering (ISE) that are gradually working toward a formalization of the classification pattern. However, for most of these communities, this work is incomplete, in that they have not yet arrived at a solution with the expressiveness of the powerset benchmark. This contrasts with the early smooth adoption of powerset by other information systems communities to, for example, formalize relations. One way of understanding the varying rates of adoption is recognizing that the different communities have different historical baggage. Many conceptual modeling communities emerged from work done on database design, and this creates hurdles to the adoption of the high level of expressiveness of powersets. Another relevant factor is that these communities also often feel, particularly in the case of domain modeling, a responsibility to explain the semantics of whatever formal structures they adopt. This paper aims to make sense of the formalization of the classification pattern in ISE and surveys its history through the literature, starting from the relevant theoretical works of the mathematical literature and gradually shifting focus

Travel patterns of cancer surgery patients in a regionalized system.

Science.gov (United States)

Smith, Andrew K; Shara, Nawar M; Zeymo, Alexander; Harris, Katherine; Estes, Randy; Johnson, Lynt B; Al-Refaie, Waddah B

2015-11-01

Regionalization of complex surgeries has increased patient travel distances possibly leaving a substantial burden on those at risk for poorer surgical outcomes. To date, little is known about travel patterns of cancer surgery patients in regionalized settings. To inform this issue, we sought to assess travel patterns of those undergoing a major cancer surgery within a regionalized system. We identified 4733 patients who underwent lung, esophageal, gastric, liver, pancreatic, and colorectal resections from 2002-2014 within a multihospital system in the Mid-Atlantic region of the United States. Patient age, race and/or ethnicity, and insurance status were extracted from electronic health records. We used Geographical Information System capabilities in R software to estimate travel distance and map patient addresses based on cancer surgery type and these characteristics. We used visual inspection, analysis of variance, and interaction analyses to assess the distribution of travel distances between patient populations. A total of 48.2% of patients were non-white, 49.9% were aged >65 y, and 54.9% had private insurance. Increased travel distance was associated with decreasing age and those undergoing pancreatic and esophageal resections. Also, black patients tend to travel shorter distances than other racial and/or ethnic groups. These maps offer a preliminary understanding into variations of geospatial travel patterns among patients receiving major cancer surgery in a Mid-Atlantic regionalized setting. Future research should focus on the impact of regionalization on timely delivery of surgical care and other quality metrics. Copyright © 2015 Elsevier Inc. All rights reserved.

Coherent Rabi oscillations in a molecular system and sub-diffraction-limited pattern generation

International Nuclear Information System (INIS)

Liao, Zeyang; Al-Amri, M; Zubairy, M Suhail

2015-01-01

The resolution of a photolithography and optical imaging system is restricted by the diffraction limit. Coherent Rabi oscillations have been shown to be able to overcome the diffraction limit in a simple two-level atomic system (Z Liao, M Al-amri, and M S Zubairy 2010 Phys. Rev. Lett. 105 183601). In this paper, we numerically calculate the wave packet dynamics of a molecular system interacting with an ultrashort laser pulse and show that coherent Rabi oscillations in a molecular system are also possible. Moreover, a sub-diffraction-limited pattern can be generated in this system by introducing spatially modulated Rabi oscillations. We also discuss several techniques to improve the visibility of the sub-diffraction-limited pattern. Our result may have important applications in super-resolution optical lithography and optical imaging. (paper)

Assessment of human respiration patterns via noncontact sensing using Doppler multi-radar system.

Science.gov (United States)

Gu, Changzhan; Li, Changzhi

2015-03-16

Human respiratory patterns at chest and abdomen are associated with both physical and emotional states. Accurate measurement of the respiratory patterns provides an approach to assess and analyze the physical and emotional states of the subject persons. Not many research efforts have been made to wirelessly assess different respiration patterns, largely due to the inaccuracy of the conventional continuous-wave radar sensor to track the original signal pattern of slow respiratory movements. This paper presents the accurate assessment of different respiratory patterns based on noncontact Doppler radar sensing. This paper evaluates the feasibility of accurately monitoring different human respiration patterns via noncontact radar sensing. A 2.4 GHz DC coupled multi-radar system was used for accurate measurement of the complete respiration patterns without any signal distortion. Experiments were carried out in the lab environment to measure the different respiration patterns when the subject person performed natural breathing, chest breathing and diaphragmatic breathing. The experimental results showed that accurate assessment of different respiration patterns is feasible using the proposed noncontact radar sensing technique.

Regulation of Spatiotemporal Patterns by Biological Variability: General Principles and Applications to Dictyostelium discoideum.

Directory of Open Access Journals (Sweden)

Miriam Grace

2015-11-01

Full Text Available Spatiotemporal patterns often emerge from local interactions in a self-organizing fashion. In biology, the resulting patterns are also subject to the influence of the systematic differences between the system's constituents (biological variability. This regulation of spatiotemporal patterns by biological variability is the topic of our review. We discuss several examples of correlations between cell properties and the self-organized spatiotemporal patterns, together with their relevance for biology. Our guiding, illustrative example will be spiral waves of cAMP in a colony of Dictyostelium discoideum cells. Analogous processes take place in diverse situations (such as cardiac tissue, where spiral waves occur in potentially fatal ventricular fibrillation so a deeper understanding of this additional layer of self-organized pattern formation would be beneficial to a wide range of applications. One of the most striking differences between pattern-forming systems in physics or chemistry and those in biology is the potential importance of variability. In the former, system components are essentially identical with random fluctuations determining the details of the self-organization process and the resulting patterns. In biology, due to variability, the properties of potentially very few cells can have a driving influence on the resulting asymptotic collective state of the colony. Variability is one means of implementing a few-element control on the collective mode. Regulatory architectures, parameters of signaling cascades, and properties of structure formation processes can be "reverse-engineered" from observed spatiotemporal patterns, as different types of regulation and forms of interactions between the constituents can lead to markedly different correlations. The power of this biology-inspired view of pattern formation lies in building a bridge between two scales: the patterns as a collective state of a very large number of cells on the one hand

Assembly and patterning of the vascular network of the vertebrate hindbrain

OpenAIRE

Fujita, Misato; Cha, Young R.; Pham, Van N.; Sakurai, Atsuko; Roman, Beth L.; Gutkind, J. Silvio; Weinstein, Brant M.

2011-01-01

The cranial vasculature is essential for the survival and development of the central nervous system and is important in stroke and other brain pathologies. Cranial vessels form in a reproducible and evolutionarily conserved manner, but the process by which these vessels assemble and acquire their stereotypic patterning remains unclear. Here, we examine the stepwise assembly and patterning of the vascular network of the zebrafish hindbrain. The major artery supplying the hindbrain, the basilar...

Complement activating soluble pattern recognition molecules with collagen-like regions, mannan-binding lectin, ficolins and associated proteins

DEFF Research Database (Denmark)

Thiel, Steffen

2007-01-01

Mannan-binding lectin (MBL), L-ficolin, M-ficolin and H-ficolin are all complement activating soluble pattern recognition molecules with recognition domains linked to collagen-like regions. All four may form complexes with four structurally related proteins, the three MBL-associated serine...... proteases (MASPs), MASP-1, MASP-2 and MASP-3, and a smaller MBL-associated protein (MAp19). The four recognition molecules recognize patterns of carbohydrate or acetyl-group containing ligands. After binding to the relevant targets all four are able to activate the complement system. We thus have a system...... where four different and/or overlapping patterns of microbial origin or patterns of altered-self may be recognized, but in all cases the signalling molecules, the MASPs, are shared. MASP-1 and MASP-3 are formed from one gene, MASP1/3, by alternative splicing generating two different mRNAs from a single...

Pattern of Cleanliness with Technology Intervention for Innovation Life

Science.gov (United States)

Hutari Mulyani, Sitti; Hendrik, Billy; Andhika Putra, Rio; Masril, Mardhiah

2017-12-01

Environmental solutions around the world today are making people dependent on technological developments. However, the technology cannot be separated from the community either in the form or its influence, therefore the pattern of behavior of society must also get arrangements for technology to occur as an acceleration of life done properly. This study aims to obtain patterns of community behavior on non-organic waste by using technology intervention. Gap exploration is essential for theoretical and experimental analysis of humans who dispose of unorganic and organic waste out of place. But the field of behavior analysis is uniquely tailored to contribute to this body of work. Sustainable development depends on changing technology to achieve its goals. We report on data collected form an on-line survey, which possible solutions for trash problems. In this paper we present an integrated waste management system with IT that we called I-BSC (Indonesia Bersih (Clean), Sehat (Healty) and Cerdas (Smart)). This I-BSC is not only for deposit bottles and systems but the system aims also to create awareness of waste production and management, which serves as an educational platform in urban environments for further life innovation.

Left Right Patterning, Evolution and Cardiac Development

Science.gov (United States)

Dykes, Iain M.

2018-01-01

Many aspects of heart development are determined by the left right axis and as a result several congenital diseases have their origins in aberrant left-right patterning. Establishment of this axis occurs early in embryogenesis before formation of the linear heart tube yet impacts upon much later morphogenetic events. In this review I discuss the differing mechanisms by which left-right polarity is achieved in the mouse and chick embryos and comment on the evolution of this system. I then discus three major classes of cardiovascular defect associated with aberrant left-right patterning seen in mouse mutants and human disease. I describe phenotypes associated with the determination of atrial identity and venous connections, looping morphogenesis of the heart tube and finally the asymmetric remodelling of the embryonic branchial arch arterial system to form the leftward looped arch of aorta and associated great arteries. Where appropriate, I consider left right patterning defects from an evolutionary perspective, demonstrating how developmental processes have been modified in species over time and illustrating how comparative embryology can aide in our understanding of congenital heart disease. PMID:29755990

Archetypical patterns and trajectories of land systems in Europe

DEFF Research Database (Denmark)

Levers, Christian; Müller, Daniel; Erb, Karlheinz

2018-01-01

-system change, there is a need to develop approaches to reduce this complexity. Using Europe as a case study, we applied a clustering approach based on self-organising maps and 12 land-use indicators to map (1) land-system archetypes for the year 2006, defined as characteristic patterns of land-use extent...... and intensity, and (2) archetypical change trajectories, defined as characteristic changes in these indicators between 1990 and 2006. Our analysis identified 15 land-system archetypes, with low-intensity archetypes dominating (ca. 55 % coverage) followed by high-intensity archetypes (ca. 26 %). In terms...... of change, we identified 17 archetypical change trajectories, clustered in four broad categories. Stable land systems were most widespread (ca. 40 % of the EU27), followed by land systems characterised by land-use conversions (ca. 26 %), de-intensification trends (ca. 18 %), and intensification trends (ca...

An in-process form error measurement system for precision machining

International Nuclear Information System (INIS)

Gao, Y; Huang, X; Zhang, Y

2010-01-01

In-process form error measurement for precision machining is studied. Due to two key problems, opaque barrier and vibration, the study of in-process form error optical measurement for precision machining has been a hard topic and so far very few existing research works can be found. In this project, an in-process form error measurement device is proposed to deal with the two key problems. Based on our existing studies, a prototype system has been developed. It is the first one of the kind that overcomes the two key problems. The prototype is based on a single laser sensor design of 50 nm resolution together with two techniques, a damping technique and a moving average technique, proposed for use with the device. The proposed damping technique is able to improve vibration attenuation by up to 21 times compared to the case of natural attenuation. The proposed moving average technique is able to reduce errors by seven to ten times without distortion to the form profile results. The two proposed techniques are simple but they are especially useful for the proposed device. For a workpiece sample, the measurement result under coolant condition is only 2.5% larger compared with the one under no coolant condition. For a certified Wyko test sample, the overall system measurement error can be as low as 0.3 µm. The measurement repeatability error can be as low as 2.2%. The experimental results give confidence in using the proposed in-process form error measurement device. For better results, further improvement in design and tests are necessary

Patterned layers of adsorbed extracellular matrix proteins: influence on mammalian cell adhesion.

Science.gov (United States)

Dupont-Gillain, C C; Alaerts, J A; Dewez, J L; Rouxhet, P G

2004-01-01

Three patterned systems aiming at the control of mammalian cell behavior are presented. The determinant feature common to these systems is the spatial distribution of extracellular matrix (ECM) proteins (mainly collagen) on polymer substrates. This distribution differs from one system to another with respect to the scale at which it is affected, from the supracellular to the supramolecular scale, and with respect to the way it is produced. In the first system, the surface of polystyrene was oxidized selectively to form micrometer-scale patterns, using photolithography. Adsorption of ECM proteins in presence of a competitor was enhanced on the oxidized domains, allowing selective cell adhesion to be achieved. In the second system, electron beam lithography was used to engrave grooves (depth and width approximately 1 microm) on a poly(methyl methacrylate) (PMMA) substratum. No modification of the surface chemistry associated to the created topography could be detected. Cell orientation along the grooves was only observed when collagen was preadsorbed on the substratum. In the third system, collagen adsorbed on PMMA was dried in conditions ensuring the formation of a nanometer-scale pattern. Cell adhesion was enhanced on such patterned collagen layers compared to smooth collagen layers.

Cellular automaton modeling of biological pattern formation characterization, examples, and analysis

CERN Document Server

Deutsch, Andreas

2017-01-01

This text explores the use of cellular automata in modeling pattern formation in biological systems. It describes several mathematical modeling approaches utilizing cellular automata that can be used to study the dynamics of interacting cell systems both in simulation and in practice. New in this edition are chapters covering cell migration, tissue development, and cancer dynamics, as well as updated references and new research topic suggestions that reflect the rapid development of the field. The book begins with an introduction to pattern-forming principles in biology and the various mathematical modeling techniques that can be used to analyze them. Cellular automaton models are then discussed in detail for different types of cellular processes and interactions, including random movement, cell migration, adhesive cell interaction, alignment and cellular swarming, growth processes, pigment cell pattern formation, tissue development, tumor growth and invasion, and Turing-type patterns and excitable media. In ...

A System of Test Methods for Sheet Metal Forming Tribology

DEFF Research Database (Denmark)

Bay, Niels; Olsson, David Dam; Andreasen, Jan Lasson

2007-01-01

Sheet metal forming of tribologically difficult materials such as stainless steel, Al-alloys and Ti-alloys or forming in tribologically difficult operations like ironing, punching or deep drawing of thick plate requires often use of environmentally hazardous lubricants such as chlorinated paraffin...... oils in order to avoid galling. The present paper describes a systematic research in the development of new, environmentally harmless lubricants focusing on the lubricant testing aspects. A system of laboratory tests has been developed to study the lubricant performance under the very varied conditions...... appearing in different sheet forming operations such as stamping, deep drawing, ironing and punching. The laboratory tests have been especially designed to model the conditions in industrial production....

How Do Multiple-Star Systems Form? VLA Study Reveals "Smoking Gun"

Science.gov (United States)

2006-12-01

Astronomers have used the National Science Foundation's Very Large Array (VLA) radio telescope to image a young, multiple-star system with unprecedented detail, yielding important clues about how such systems are formed. Most Sun-sized or larger stars in the Universe are not single, like our Sun, but are members of multiple-star systems. Astronomers have been divided on how such systems can form, producing competing theoretical models for this process. Multiple Star Formation Graphic Proposed Formation Process for L1551 IRS5 CREDIT: Bill Saxton, NRAO/AUI/NSF Click on image for page of graphics and full information The new VLA study produced a "smoking gun" supporting one of the competing models, said Jeremy Lim, of the Institute of Astronomy & Astrophysics, Academia Sinica, in Taipei, Taiwan, whose study, done with Shigehisa Takakuwa of the National Astronomical Observatory of Japan, is published in the December 10 issue of the Astrophysical Journal. Ironically, their discovery of a third, previously-unknown, young star in the system may support a second theoretical model. "There may be more than one way to make a multiple-star system," Lim explained. The astronomers observed an object called L1551 IRS5, young, still-forming protostars enshrouded in a cloud of gas and dust, some 450 light-years from Earth in the direction of the constellation Taurus. Invisible to optical telescopes because of the gas and dust, this object was discovered in 1976 by astronomers using infrared telescopes. A VLA study in 1998 showed two young stars orbiting each other, each surrounded by a disk of dust that may, in time, congeal into a system of planets. Lim and Takakuwa re-examined the system, using improved technical capabilities that greatly boosted the quality of their images. "In the earlier VLA study, only half of the VLA's 27 antennas had receivers that could collect the radio waves, at a frequency of 43 GigaHertz (GHz), coming from the dusty disks. When we re-observed this

Systemic and intracardiac hemodynamic disturbance in complicated forms of hepatocirrhosis

International Nuclear Information System (INIS)

Mjasnik, B.N.; Chodzibekov, M.C.; Achmedzanova, S.S.

1990-01-01

On the base of radionuclide investigation of systemic and intracardiac hemodynamics was shown that the rate of kinetic variants of hemocirculation does not depend on the stage of portal hypertension in complicated forms of hepatocirrhosis. Blood redistribution in these patients creates volumentrical overload of cardiac ventricles and pulmonary circulation, that is conditioned of additional tension of cardiac muscle and especially of right ventricle myocardium, which reserve rapidly ran out. Operations which increase blood shunt from portal system to superior vena cava raise preload of myocardium that makes the high risk in appearance of cardiac insufficiency, especially of right ventricle in early post operative period. The received data indicated on necessity to take into account the state of intracardiac hemodynamics in selection of surgical approach in patients with complicated forms of hepatocirrhosis. (orig.) [de

Translation symmetry of the Fraunhofer diffraction pattern from a polygonal aperture

International Nuclear Information System (INIS)

Vinogradov, I.R.; Tarlykov, V.A.

1995-01-01

The problem of observing the translation symmetry in the Fraunhofer diffraction pattern is treated. The objective of this study is to show that translation symmetry can be observed in the Fraunhofer diffraction pattern if the diffraction aperture can be represented in the form of a set of parallelogram apertures. It is shown that the diffraction field produced by such an aperture can be represented as a system of point sources modulated with an amplitude factor. 10 refs., 2 figs

An IPC-based Prolog design pattern for integrating backward chaining inference into applications or embedded systems

Directory of Open Access Journals (Sweden)

Li Guoqi

2014-12-01

Full Text Available Prolog is one of the most important candidates to build expert systems and AI-related programs and has potential applications in embedded systems. However, Prolog is not suitable to develop many kinds of components, such as data acquisition and task scheduling, which are also crucial. To make the best use of the advantages and bypass the disadvantages, it is attractive to integrate Prolog with programs developed by other languages. In this paper, an IPC-based method is used to integrate backward chaining inference implemented by Prolog into applications or embedded systems. A Prolog design pattern is derived from the method for reuse, whose principle and definition are provided in detail. Additionally, the design pattern is applied to a target system, which is free software, to verify its feasibility. The detailed implementation of the application is given to clarify the design pattern. The design pattern can be further applied to wide range applications and embedded systems and the method described in this paper can also be adopted for other logic programming languages.

Optimal control of nonlinear continuous-time systems in strict-feedback form.

Science.gov (United States)

Zargarzadeh, Hassan; Dierks, Travis; Jagannathan, Sarangapani

2015-10-01

This paper proposes a novel optimal tracking control scheme for nonlinear continuous-time systems in strict-feedback form with uncertain dynamics. The optimal tracking problem is transformed into an equivalent optimal regulation problem through a feedforward adaptive control input that is generated by modifying the standard backstepping technique. Subsequently, a neural network-based optimal control scheme is introduced to estimate the cost, or value function, over an infinite horizon for the resulting nonlinear continuous-time systems in affine form when the internal dynamics are unknown. The estimated cost function is then used to obtain the optimal feedback control input; therefore, the overall optimal control input for the nonlinear continuous-time system in strict-feedback form includes the feedforward plus the optimal feedback terms. It is shown that the estimated cost function minimizes the Hamilton-Jacobi-Bellman estimation error in a forward-in-time manner without using any value or policy iterations. Finally, optimal output feedback control is introduced through the design of a suitable observer. Lyapunov theory is utilized to show the overall stability of the proposed schemes without requiring an initial admissible controller. Simulation examples are provided to validate the theoretical results.

Two different streams form the dorsal visual system: anatomy and functions.

Science.gov (United States)

Rizzolatti, Giacomo; Matelli, Massimo

2003-11-01

There are two radically different views on the functional role of the dorsal visual stream. One considers it as a system involved in space perception. The other is of a system that codes visual information for action organization. On the basis of new anatomical data and a reconsideration of previous functional and clinical data, we propose that the dorsal stream and its recipient parietal areas form two distinct functional systems: the dorso-dorsal stream (d-d stream) and the ventro-dorsal stream (v-d stream). The d-d stream is formed by area V6 (main d-d extrastriate visual node) and areas V6A and MIP of the superior parietal lobule. Its major functional role is the control of actions "on line". Its damage leads to optic ataxia. The v-d stream is formed by area MT (main v-d extrastriate visual node) and by the visual areas of the inferior parietal lobule. As the d-d stream, v-d stream is responsible for action organization. It, however, also plays a crucial role in space perception and action understanding. The putative mechanisms linking action and perception in the v-d stream is discussed.

Muscle Sensor Model Using Small Scale Optical Device for Pattern Recognitions

Directory of Open Access Journals (Sweden)

Kreangsak Tamee

2013-01-01

Full Text Available A new sensor system for measuring contraction and relaxation of muscles by using a PANDA ring resonator is proposed. The small scale optical device is designed and configured to perform the coupling effects between the changes in optical device phase shift and human facial muscle movement, which can be used to form the relationship between optical phase shift and muscle movement. By using the Optiwave and MATLAB programs, the results obtained have shown that the measurement of the contraction and relaxation of muscles can be obtained after the muscle movements, in which the unique pattern of individual muscle movement from facial expression can be established. The obtained simulation results, that is, interference signal patterns, can be used to form the various pattern recognitions, which are useful for the human machine interface and the human computer interface application and discussed in detail.

Influence of urban form on landscape pattern and connectivity in metropolitan regions: a comparative case study of Phoenix, AZ, USA, and Izmir, Turkey.

Science.gov (United States)

Park, Sohyun; Hepcan, Çiğdem C; Hepcan, Şerif; Cook, Edward A

2014-10-01

Although ecological connectivity conservation in urban areas has recently been recognized as an important issue, less is known about its relationship to urban form and landscape pattern. This study investigates how urban morphology influences regional ecosystem pattern and landscape connectivity. Two metropolitan landscapes, Phoenix, AZ, USA, and Izmir, Turkey, were compared, both of which are fast-growing regions in their national context. A wide range of variables were considered for identifying natural and urban properties. The natural characteristics include typology of urban ecosystems, urban to natural cover ratio, dominant habitat type, urban biodiversity, landscape context, and connectivity conservation efforts. Urban parameters examine urban form, urban extent, urban cover proportion, growth rate, populations, urban gradient, major drivers of urbanization, urban density, and mode/approach of urban development. Twelve landscape metrics were measured and compared across the natural patches. Results show that there is little difference in landscape connectivity in the rural zones of Phoenix and Izmir, although Phoenix has slightly higher connectivity values. The connectivity variance in urbanized areas, however, is significantly dependent on the region. For example, Phoenix urban zones have substantially lower connectivity than either urban or suburban zones in Izmir. Findings demonstrate that small and compact urban settlements with more dense populations are more likely to conserve landscape connectivity compared to multiple-concentric but amalgamated urban form spreading all over the landscape (aka urban sprawl).

Science on form. Proceedings of the first international symposium, University of Tsukuba, Japan, November 26-30, 1985

Energy Technology Data Exchange (ETDEWEB)

Ishizaka, Shozo; Kato, Yoshihiro; Takaki, Ryuji; Toriwaki, Jun-ichiro [eds.

1987-01-01

The purpose of the Symposium was to discuss interdisciplinal science aspects of form. 'Form' depends on the material and the changes. But, it is the form that appears evident at once and endures. Form is absorbed from every field as media of information. One part of the work covers the description of non-periodic phenomena, morphogenesis or evolution. Irreducible stubborn facts as diseases or social problems, or whatever else that could not be analyzed are integrally challenged to be systematized by computer simulation. The other part covers the finding of laws for determining how systems behave. Attention should be paid to pattern recognition, image processing and pattern formation. The Symposium proceeded with no parallel sessions, and participants from various fields made exciting discussions in an interdisciplinal atmosphere. (Auth.).

Exploring Long-Term Behavior Patterns in a Book Recommendation System for Reading

Science.gov (United States)

Chien, Tzu-Chao; Chen, Zhi-Hong; Chan, Tak-Wai

2017-01-01

This study explored the behavior of students who used a book recommendation system, specifically the My-Bookstore system, over a five semester period. This study addressed two main research questions, the first being related to "the most frequent behaviors and behavioral patterns." The results showed that "visiting" behavior…

Pattern formation and chaos in synergetic systems

Energy Technology Data Exchange (ETDEWEB)

Haken, H

1985-01-01

A general approach to the reduction of the equations of systems composed of many subsystems of equations for, in general, few order parameters at instability points is sketched. As special case generalized Ginzburg-Landau equations are obtained. Recent results based on these equations, showing pattern formation in the convection instability and flames, are presented. Bifurcations from tori to other tori are treated, and some general conclusions are drawn. Analogies between fluid dynamics and lasers which led to the prediction of laser light chaos by Haken (1975) are pointed out. Finally the suspension of a class of discrete one-dimensional maps is discussed and explicitly presented for a typical case. 21 references.

Stochastic demand patterns for Markov service facilities with neutral and active periods

International Nuclear Information System (INIS)

Csenki, Attila

2009-01-01

In an earlier paper, a closed form expression was obtained for the joint interval reliability of a Markov system with a partitioned state space S=U union D, i.e. for the probability that the system will reside in the set of up states U throughout the union of some specific disjoint time intervals I l =[θ l ,θ l +ζ l ],l=1,...,k. The deterministic time intervals I l formed a demand pattern specifying the desired active periods. In the present paper, we admit stochastic demand patterns by assuming that the lengths of the active periods, ζ l , as well as the lengths of the neutral periods, θ l -(θ l-1 +ζ l-1 ), are random. We explore two mechanisms for modelling random demand: (1) by alternating renewal processes; (2) by sojourn times of some continuous time Markov chain with a partitioned state space. The first construction results in an expression in terms of a revised version of the moment generating functions of the sojourns of the alternating renewal process. The second construction involves the probability that a Markov chain follows certain patterns of visits to some groups of states and yields an expression using Kronecker matrix operations. The model of a small computer system is analysed to exemplify the ideas

Evaluation of the effect scan pattern has on the trueness and precision of six intraoral digital impression systems.

Science.gov (United States)

Mennito, Anthony S; Evans, Zachary P; Lauer, Abigail W; Patel, Ravi B; Ludlow, Mark E; Renne, Walter G

2018-03-01

Clinicians have been slow to adopt digital impression technologies due possibly to perceived technique sensitivities involved in data acquisition. This research has two aims: determine whether scan pattern and sequence affects the accuracy of the three-dimensional (3D) model created from this digital impression and to compare the 5 imaging systems with regards to their scanning accuracy for sextant impressions. Six digital intraoral impression systems were used to scan a typodont sextant with optical properties similar to natural teeth. The impressions were taken using five different scan patterns and the resulting digital models were overlayed on a master digital model to determine the accuracy of each scanner performing each scan pattern. Furthermore, regardless of scan pattern, each digital impression system was evaluated for accuracy to the other systems in this same manner. No differences of significance were noted in the accuracy of 3D models created using six distinct scan patterns with one exception involving the CEREC Omnicam. Planmeca Planscan was determined to be the truest scanner while 3Shape Trios was determined to be the most precise for sextant impression making. Scan pattern does not significantly affect the accuracy of the resulting digital model for sextant scanning. Companies who make digital impression systems often recommend a scan pattern specific for their system. However, every clinical scanning scenario is different and may require a different approach. Knowing how important scan pattern is with regards to accuracy would be helpful for guiding a growing number of practitioners who are utilizing this technology. © 2018 Wiley Periodicals, Inc.

Morphogenesis and pattern formation in biological systems experiments and models

CERN Document Server

Noji, Sumihare; Ueno, Naoto; Maini, Philip

2003-01-01

A central goal of current biology is to decode the mechanisms that underlie the processes of morphogenesis and pattern formation. Concerned with the analysis of those phenomena, this book covers a broad range of research fields, including developmental biology, molecular biology, plant morphogenesis, ecology, epidemiology, medicine, paleontology, evolutionary biology, mathematical biology, and computational biology. In Morphogenesis and Pattern Formation in Biological Systems: Experiments and Models, experimental and theoretical aspects of biology are integrated for the construction and investigation of models of complex processes. This collection of articles on the latest advances by leading researchers not only brings together work from a wide spectrum of disciplines, but also provides a stepping-stone to the creation of new areas of discovery.

Phylogenetic patterns and phenotypic plasticity of molluscan sexual systems.

Science.gov (United States)

Collin, Rachel

2013-10-01

Molluscs show a wide diversity of sexual systems and strategies. There are both gastropod and bivalve families that are each primarily dioecious, simultaneous hermaphrodites, or sequential hermaphrodites, and other families in which almost every sexual strategy occurs. The multiple evolutionary transitions of sexual systems within molluscs would allow comparative analyses of the associated ecological factors, but data on all but a few groups are too sparse to draw many solid conclusions. The phylogenetic distribution of sexual systems in the Mollusca shows that gastropods and bivalves demonstrate different patterns, possibly associated with the presence/absence of copulation. The distribution of change of sex suggests that, in gastropods, sequential hermaphrodites do not evolve from simultaneous hermaphrodites, and that sex reversal (flip-flopping) occurs in free-spawners but not in copulators. Three well-studied protandrous gastropod groups (calyptraeids, coralliophilids, and patellogastropods) show similar responses to environmental conditions and associations with conspecifics. They all have the following attributes: (1) they are sedentary, (2) they live in groups, patches, or aggregates, and (3) size at sex change varies among sites and among aggregates. In addition the available experimental evidence suggests that (4) the presence of females or large individuals represses growth and sex change of males, and (5) behavior seems to mediate the repressive influence of large females. Available data from other species tend to support these patterns. Finally, the repression of growth of males by females in protandry likely facilitates the evolution of dwarf males.

Exploring How Technology Mediates the Types of Relationships Formed in Sociotechnical Systems

Science.gov (United States)

Chu, Kar-Hai

2012-01-01

This work presents an exploratory study of how technology mediates the different types of relationships that are formed in sociotechnical systems. More people each day are connecting with each other through social networks, online communities, and other forms of virtual environments. Whether for education, information seeking, friendship,…

On the Automated Synthesis of Enterprise Integration Patterns to Adapt Choreography-based Distributed Systems

Directory of Open Access Journals (Sweden)

Marco Autili

2015-12-01

Full Text Available The Future Internet is becoming a reality, providing a large-scale computing environments where a virtually infinite number of available services can be composed so to fit users' needs. Modern service-oriented applications will be more and more often built by reusing and assembling distributed services. A key enabler for this vision is then the ability to automatically compose and dynamically coordinate software services. Service choreographies are an emergent Service Engineering (SE approach to compose together and coordinate services in a distributed way. When mismatching third-party services are to be composed, obtaining the distributed coordination and adaptation logic required to suitably realize a choreography is a non-trivial and error prone task. Automatic support is then needed. In this direction, this paper leverages previous work on the automatic synthesis of choreography-based systems, and describes our preliminary steps towards exploiting Enterprise Integration Patterns to deal with a form of choreography adaptation.

Treatment systems guidelines for primary rectal cancer from the 1996 patterns of care study

International Nuclear Information System (INIS)

Minsky, Bruce D.; Coia, Lawrence; Haller, Daniel; Hoffman, John; John, Madhu; Landry, Jerome; Pisansky, Thomas M.; Willett, Christopher; Mahon, Irene; Owen, Jean; Hanks, Gerald

1998-01-01

Purpose: The Patterns of Care Rectal Cancer Committee was formed to develop consensus recommendations for patients with adenocarcinoma of the rectum limited to the pelvis. Methods and Materials: The Committee was composed of a multidisciplinary group of oncologists, and clinical scenarios were chosen to address most of the major treatment controversies in the combined modality treatment of rectal cancer. A literature search was then conducted and the major articles were identified. A modified Delphi technique was used to arrive at consensus. Serial surveys were conducted by distributing questionnaires to the Committee members to consolidate expert opinion. Voting was conducted using a scoring system and opinions were unified to the highest degree possible. Results: Consensus voting was performed for 4 clinical scenarios. Acceptability ratings for treatment were grouped into 3 broad categories: not acceptable, acceptable, and most acceptable. Based on the treatment options, a decision tree was developed that reflects the consensus of the committee. Conclusion: These options may help guide treatment decisions in rectal cancer

Improving the forming capability of laser dynamic forming by using rubber as a forming medium

Science.gov (United States)

Shen, Zongbao; Liu, Huixia; Wang, Xiao; Wang, Cuntang

2016-04-01

Laser dynamic forming (LDF) is a novel high velocity forming technique, which employs laser-generated shock wave to load the sample. The forming velocity induced by the high energy laser pulse may exceed the critical forming velocity, resulting in the occurrence of premature fracture. To avoid the above premature fracture, rubber is introduced in LDF as a forming medium to prolong the loading duration in this paper. Laser induced shock wave energy is transferred to the sample in different forming stages, so the forming velocity can be kept below the critical forming velocity when the initial laser energy is high for fracture. Bulge forming experiments with and without rubber were performed to study the effect of rubber on loading duration. The experimental results show that, the shock wave energy attenuates during the propagation through the rubber layer, the rubber can avoid the premature fracture. So the plastic deformation can continue, the forming capability of LDF is improved. Due to the severe plastic deformation under rubber compression, adiabatic shear bands (ASB) occur in LDF with rubber. The material softening in ASB leads to the irregular fracture, which is different from the premature fracture pattern (regular fracture) in LDF without rubber. To better understand this deformation behavior, Johnson-Cook model is used to simulate the dynamic response and the evolution of ASB of copper sample. The simulation results also indicate the rubber can prolong the loading duration.

Modeling Multiple Human-Automation Distributed Systems using Network-form Games

Science.gov (United States)

Brat, Guillaume

2012-01-01

The paper describes at a high-level the network-form game framework (based on Bayes net and game theory), which can be used to model and analyze safety issues in large, distributed, mixed human-automation systems such as NextGen.

Optimization of control bars patterns and fuel recharges of coupled form; Optimizacion de patrones de barras de control y recargas de combustible de forma acoplada

Energy Technology Data Exchange (ETDEWEB)

Mejia S, D.M.; Ortiz S, J.J. [ININ, 52750 Ocoyoacac, Estado de Mexico (Mexico)]. e-mail: dulcema6715@hotmail.com

2006-07-01

In this work a system coupled for the optimization of fuel recharges and control bars patterns in boiling water reactors (BWR by its initials in English) is presented. It was used a multi state recurrent neural net like optimization technique. This type of neural net has been used in the solution of diverse problems, in particular the design of patterns of control bars and the design of the fuel recharge. However, these problems have been resolved in an independent way with different optimization techniques. The system was developed in FORTRAN 77 language, it calls OCORN (Optimization of Cycles of Operation using Neural Nets) and it solves both problems of combinatory optimization in a coupled way. OCORN begins creating a seed recharge by means of an optimization through the Haling principle. Later on a pattern of control bars for this recharge seed is proposed. Then a new fuel recharge is designed using the control bars patterns previously found. By this way an iterative process begins among the optimization of control bars patterns and the fuel recharge until a stop criteria it is completed. The stop criteria is completed when the fuel recharges and the control bars patterns don't vary in several successive iterations. The final result is an optimal fuel recharge and its respective control bars pattern. In this work the obtained results by this system for a cycle of balance of 18 months divided in 12 steps of burnt are presented. The obtained results are very encouraging, since the fuel recharge and the control bars pattern, its fulfill with the restrictions imposed in each one of the problems. (Author)

Nonlinear waves and pattern dynamics

CERN Document Server

Pelinovsky, Efim; Mutabazi, Innocent

2018-01-01

This book addresses the fascinating phenomena associated with nonlinear waves and spatio-temporal patterns. These appear almost everywhere in nature from sand bed forms to brain patterns, and yet their understanding still presents fundamental scientific challenges. The reader will learn here, in particular, about the current state-of-the art and new results in: Nonlinear water waves: resonance, solitons, focusing, Bose-Einstein condensation, as well as and their relevance for the sea environment (sea-wind interaction, sand bed forms, fiber clustering) Pattern formation in non-equilibrium media: soap films, chimera patterns in oscillating media, viscoelastic Couette-Taylor flow, flow in the wake behind a heated cylinder, other pattern formation. The editors and authors dedicate this book to the memory of Alexander Ezersky, Professor of Fluid Mechanics at the University of Caen Normandie (France) from September 2007 to July 2016. Before 2007, he had served as a Senior Scientist at the Institute of Applied Physi...

Transformation of nonlinear discrete-time system into the extended observer form

Science.gov (United States)

Kaparin, V.; Kotta, Ü.

2018-04-01

The paper addresses the problem of transforming discrete-time single-input single-output nonlinear state equations into the extended observer form, which, besides the input and output, also depends on a finite number of their past values. Necessary and sufficient conditions for the existence of both the extended coordinate and output transformations, solving the problem, are formulated in terms of differential one-forms, associated with the input-output equation, corresponding to the state equations. An algorithm for transformation of state equations into the extended observer form is proposed and illustrated by an example. Moreover, the considered approach is compared with the method of dynamic observer error linearisation, which likewise is intended to enlarge the class of systems transformable into an observer form.

Patterns Formation in a Self-Gravitating Isentropic Gas

Science.gov (United States)

Humi, Mayer

2018-03-01

In this paper we consider a hydrodynamic model for the matter density distribution in a self gravitating, isentropic 2-d disk of gas where the isentropy coefficient is allowed to be a function of position. For this model we prove analytically the existence of steady state and time dependent solutions in which the matter density in the disk is oscillatory and pattern forming. This research is motivated in part by recent astronomical observations and Laplace conjecture (made in 1796) that planetary systems evolve from a family of isolated rings that are formed within a primitive interstellar gas cloud.

Femtosecond laser-induced herringbone patterns

Science.gov (United States)

Garcell, Erik M.; Lam, Billy; Guo, Chunlei

2018-06-01

Femtosecond laser-induced herringbone patterns are formed on copper (Cu). These novel periodic structures are created following s-polarized, large incident angle, femtosecond laser pulses. Forming as slanted and axially symmetric laser-induced periodic surface structures along the side walls of ablated channels, the result is a series of v-shaped structures that resemble a herringbone pattern. Fluence mapping, incident angle studies, as well as polarization studies have been conducted and provide a clear understanding of this new structure.

Patterns in the bubble-free Belousov-Zhabotinsky reaction dissolved in a microemulsion

Science.gov (United States)

Dähmlow, P.; Almeida, J.; Müller, S. C.

2016-12-01

A newly created system, namely a bubble-free Belousov-Zhabotinsky reaction embedded in a microemulsion is experimentally studied, with 1,4-cyclohexanedione used as substrate. Initially, this system shows oscillations or waves. After some minutes, waves do not form a refractory state in their wake, but the system remains excited. However, within this excited regime, a new wave emerges directly behind the initial one, causing an acceleration of the latter. The excited state lasts for several minutes. Subsequently, three different types of patterns emerge, depending on the initial chemical concentrations: wave turbulence, transient lines (TL) and an intermediate state. TL are neither Turing structures nor excitation waves. The intermediate state is a mixed pattern of TL and wave turbulence.

Development of pattern aware unit (PAU) for the LCLS beam based fast feedback system

International Nuclear Information System (INIS)

Kim, K.H.; Allison, S.; Fairley, D.; Himel, T.M.; Krejcik, P.; Rogind, D.; Williams, E.

2012-01-01

LCLS is now successfully operating at its design beam repetition rate of 120 Hz, but in order to ensure stable beam operation at this high rate we have developed a new timing pattern aware EPICS controller for beam line actuators. Actuators that are capable of responding at 120 Hz are controlled by the new Pattern Aware Unit (PAU) as part of the beam-based feedback system. The beam at the LCLS is synchronized to the 60 Hz AC power line phase and is subject to electrical noise which differs according to which of the six possible AC phases is chosen from the 3-phase site power line. Beam operation at 120 Hz interleaves two of these 60 Hz phases and the feedback must be able to apply independent corrections to the beam pulse according to which of the 60 Hz timing patterns the pulse is synchronized to. The PAU works together with the LCLS Event Timing system which broadcasts a timing pattern that uniquely identifies each pulse when it is measured and allows the feedback correction to be applied to subsequent pulses belonging to the same timing pattern, or time slot, as it is referred to at SLAC. At 120 Hz operation this effectively provides us with two independent, but interleaved feedback loops. Other beam programs at the SLAC facility such as LCLS-II and FACET will be pulsed on other time slots and the PAUs in those systems will respond to their appropriate timing patterns. This paper describes the details of the PAU development: real-time requirements and achievement, scalability, and consistency. The operational results will also be described. (authors)

Turing patterns induced by cross-diffusion in a predator-prey system in presence of habitat complexity

International Nuclear Information System (INIS)

Ghorai, Santu; Poria, Swarup

2016-01-01

In this paper, we have investigated the phenomena of Turing pattern formation in a predator-prey model with habitat complexity in presence of cross diffusion. Using the linear stability analysis, the conditions for the existence of stationary pattern and the existence of Hopf bifurcation are obtained. It is shown analytically that the presence of cross diffusion in the system supports the formation of Turing pattern. Two parameter bifurcation analysis are done analytically and corresponding bifurcation diagrams are presented numerically. A series of simulation results are plotted for different biologically meaningful parameter values. Effects of variation of habitat complexity and the predator mortality rate and birth rate of prey on pattern formation are also reported. It is shown that cross-diffusion can lead to a wide variety of spatial and spatiotemporal pattern formation. It is found that the model exhibits spot and stripe pattern, and coexistence of both spot and strip patterns under the zero flux boundary condition. It is observed that cross-diffusion, habitat complexity, birth rate of prey and predator’s mortality rate play a significant role in the pattern formation of a distributed population system of predator-prey type.

Pattern formation in two-dimensional square-shoulder systems

International Nuclear Information System (INIS)

Fornleitner, Julia; Kahl, Gerhard

2010-01-01

Using a highly efficient and reliable optimization tool that is based on ideas of genetic algorithms, we have systematically studied the pattern formation of the two-dimensional square-shoulder system. An overwhelming wealth of complex ordered equilibrium structures emerge from this investigation as we vary the shoulder width. With increasing pressure three structural archetypes could be identified: cluster lattices, where clusters of particles occupy the sites of distorted hexagonal lattices, lane formation, and compact particle arrangements with high coordination numbers. The internal complexity of these structures increases with increasing shoulder width.

Pattern formation in two-dimensional square-shoulder systems

Energy Technology Data Exchange (ETDEWEB)

Fornleitner, Julia [Institut fuer Festkoerperforschung, Forschungsszentrum Juelich, D-52425 Juelich (Germany); Kahl, Gerhard, E-mail: fornleitner@cmt.tuwien.ac.a [Institut fuer Theoretische Physik and Centre for Computational Materials Science (CMS), Technische Universitaet Wien, Wiedner Hauptstrasse 8-10, A-1040 Wien (Austria)

2010-03-17

Using a highly efficient and reliable optimization tool that is based on ideas of genetic algorithms, we have systematically studied the pattern formation of the two-dimensional square-shoulder system. An overwhelming wealth of complex ordered equilibrium structures emerge from this investigation as we vary the shoulder width. With increasing pressure three structural archetypes could be identified: cluster lattices, where clusters of particles occupy the sites of distorted hexagonal lattices, lane formation, and compact particle arrangements with high coordination numbers. The internal complexity of these structures increases with increasing shoulder width.

Complex temporal and spatial patterns in nonequilibrium systems: Progress report, December 1, 1987-November 30, 1988

International Nuclear Information System (INIS)

Swinney, H.L.

1988-09-01

Dynamical systems methods are being developed and used to characterize nonequilibrium processes and to address outstanding unresolved questions regarding bifurcations and chaos, especially in reaction-diffusion systems. An information-theoretic property, the mutual information, is being examined as a means for detecting and quantifying spatiotemporal chaos. A recent analysis has shown that information on dynamics deduced from noisy data can be used to reduce the noise in those data. These tools from dynamical systems and information theory are being applied to data obtained in laboratory experiments on homogeneous systems and on extended systems. A novel unstirred chemical reactor has been designed for studies of the development and evolution of chemical spatial patterns, and experiments with this reactor have yielded the first sustained chemical spatial patterns in a controlled laboratory environment. These laboratory experiments and numerical and analytic studies of models should provide general insights into spatiotemporal patterns in nonequilibrium systems. 14 refs

Effect of long-term irrigation patterns on phosphorus forms and distribution in the brown soil zone.

Directory of Open Access Journals (Sweden)

Chang Liu

Full Text Available Continuous application of P fertilizers under different irrigation patterns can change soil phosphorus (P chemical behavior and increase soil P levels that are of environmental concern. To assess the effect of long-term different irrigation patterns on soil P fractions and availability, this study examined sequential changes in soil organic P and inorganic P from furrow irrigation (FI, surface drip irrigation (SUR, and subsurface drip irrigation (SDI in the brown soil zone (0-60 cm during 1998 to 2011. Analyses of soil P behavior showed that the levels of total P are frequently high on top soil layers. The total P (TP contents of the entire soil profiles under three irrigation treatments were 830.2-3180.1 mg/kg. The contents of available P (AP were 72.6-319.3 mg P/kg soil through soil profiles. The greatest TP and AP contents were obtained within the upper soil layers in FI. Results of Hedley's P fractionation indicate that HCl-P is a dominant form and the proportion to TP ranges from 29% to 43% in all three methods. The contents of various fractions of P were positively correlated with the levels of total carbon (TC, total inorganic carbon (TIC, and calcium (Ca, whereas the P fractions had negative correlation with pH in all soil samples. Regression models proved that NaHCO3-Po was an important factor in determining the amount of AP in FI. H2O-Po, NaHCO3-Po, and NaOH-Pi were related to available P values in SUR. NaHCO3-Po and NaOH-Po played important roles in SDI. The tomato yield under SUR was higher than SDI and FI. The difference of P availability was also controlled by the physicochemical soil properties under different irrigation schedule. SUR was a reasonable irrigation pattern to improve the utilization efficiency of water and fertilizer.

Psychophysics of human vision: The key to improved camouflage pattern design

CSIR Research Space (South Africa)

Baumbach, J

2010-11-01

Full Text Available determined by the factors mentioned above, but also by the (possible) observer/enemy. The human visual system (which includes the brain) is one of the most powerful observation systems. This paper examined the eye-brain interaction, and how... these properties could aid camouflage pattern development. 2. The Human Visual System The human visual system is very complex, therefore this study was undertaken in order to better understand the human eye-brain interaction. It also assisted in forming a...

Rayleigh-Taylor instability and mushroom-pattern formation in a two-component Bose-Einstein condensate

International Nuclear Information System (INIS)

Sasaki, Kazuki; Suzuki, Naoya; Saito, Hiroki; Akamatsu, Daisuke

2009-01-01

The Rayleigh-Taylor instability at the interface in an immiscible two-component Bose-Einstein condensate is investigated using the mean field and Bogoliubov theories. Rayleigh-Taylor fingers are found to grow from the interface and mushroom patterns are formed. Quantized vortex rings and vortex lines are then generated around the mushrooms. The Rayleigh-Taylor instability and mushroom-pattern formation can be observed in a trapped system.

Implementation theory of distortion-invariant pattern recognition for optical and digital signal processing systems

Science.gov (United States)

Lhamon, Michael Earl

A pattern recognition system which uses complex correlation filter banks requires proportionally more computational effort than single-real valued filters. This introduces increased computation burden but also introduces a higher level of parallelism, that common computing platforms fail to identify. As a result, we consider algorithm mapping to both optical and digital processors. For digital implementation, we develop computationally efficient pattern recognition algorithms, referred to as, vector inner product operators that require less computational effort than traditional fast Fourier methods. These algorithms do not need correlation and they map readily onto parallel digital architectures, which imply new architectures for optical processors. These filters exploit circulant-symmetric matrix structures of the training set data representing a variety of distortions. By using the same mathematical basis as with the vector inner product operations, we are able to extend the capabilities of more traditional correlation filtering to what we refer to as "Super Images". These "Super Images" are used to morphologically transform a complicated input scene into a predetermined dot pattern. The orientation of the dot pattern is related to the rotational distortion of the object of interest. The optical implementation of "Super Images" yields feature reduction necessary for using other techniques, such as artificial neural networks. We propose a parallel digital signal processor architecture based on specific pattern recognition algorithms but general enough to be applicable to other similar problems. Such an architecture is classified as a data flow architecture. Instead of mapping an algorithm to an architecture, we propose mapping the DSP architecture to a class of pattern recognition algorithms. Today's optical processing systems have difficulties implementing full complex filter structures. Typically, optical systems (like the 4f correlators) are limited to phase

Alternatives for high-level waste forms, containers, and container processing systems

International Nuclear Information System (INIS)

Crawford, T.W.

1995-01-01

This study evaluates alternatives for high-level waste forms, containers, container processing systems, and onsite interim storage. Glass waste forms considered are cullet, marbles, gems, and monolithic glass. Small and large containers configured with several combinations of overpack confinement and shield casks are evaluated for these waste forms. Onsite interim storage concepts including canister storage building, bore holes, and storage pad were configured with various glass forms and canister alternatives. All favorable options include the monolithic glass production process as the waste form. Of the favorable options the unshielded 4- and 7-canister overpack options have the greatest technical assurance associated with their design concepts due to their process packaging and storage methods. These canisters are 0.68 m and 0.54 m in diameter respectively and 4.57 m tall. Life-cycle costs are not a discriminating factor in most cases, varying typically less than 15 percent

First-order systems of linear partial differential equations: normal forms, canonical systems, transform methods

Directory of Open Access Journals (Sweden)

Heinz Toparkus

2014-04-01

Full Text Available In this paper we consider first-order systems with constant coefficients for two real-valued functions of two real variables. This is both a problem in itself, as well as an alternative view of the classical linear partial differential equations of second order with constant coefficients. The classification of the systems is done using elementary methods of linear algebra. Each type presents its special canonical form in the associated characteristic coordinate system. Then you can formulate initial value problems in appropriate basic areas, and you can try to achieve a solution of these problems by means of transform methods.

Vector neural net identifying many strongly distorted and correlated patterns

Science.gov (United States)

Kryzhanovsky, Boris V.; Mikaelian, Andrei L.; Fonarev, Anatoly B.

2005-01-01

We suggest an effective and simple algorithm providing a polynomial storage capacity of a network of the form M ~ N2s+1, where N is the dimension of the stored binary patterns. In this problem the value of the free parameter s is restricted by the inequalities N >> slnN >= 1. The algorithm allows us to identify a large number of highly distorted similar patterns. The negative influence of correlations of the patterns is suppressed by choosing a sufficiently large value of the parameter s. We show the efficiency of the algorithm by the example of a perceptron identifier, but it also can be used to increase the storage capacity of full connected systems of associative memory.

A rule-based expert system for control rod pattern of boiling water reactors by hovering around haling exposure shape

International Nuclear Information System (INIS)

Kao, P.-W.; Lin, L.-S.; Yang, J.-T.

2004-01-01

Feasible strategies for automatic BWR control rod pattern generation have been implemented in a rule-based expert system. These strategies are majorly based on a concept for which exposure distributions are hovering around the Haling exposure distribution through a cycle while radial and axial power distributions are dominantly controlled by some abstracted factors indicating the desired distributions. The system can either automatically generate expert-level control rod patterns or search for criteria-satisfied patterns originated from user's input. It has successfully been demonstrated by generating control rod patterns for the the 1775 MWth Chinshan plant in Unit I Cycle 13 alternate loading pattern and Unit 2 Cycle 8 but with longer cycle length. All rod patterns for two cycles result in all-rod-out at EOC and no violation against the four criteria. The demonstrations show that the system is considerably good in choosing initial trial rod patterns and adjusting rod patterns to satisfy the design criteria. (author)

Discontinuous drainage systems formed by highland precipitation and ground-water outflow in the Navua Valles and southwest Hadriacus Mons regions, Mars

Science.gov (United States)

Hargitai, H. I.; Gulick, V. C.; Glines, N. H.

2017-09-01

The Navua Valles are systems of paleodrainages located north of Dao Vallis, which empty into Hellas Planitia, the largest impact basin on Mars. In this study, we mapped and characterized the Navua Valles Region's individual drainage systems, including drainages along the southwestern flank of Hadriacus Mons, and one valley network from the same source as Navua Valles but flowing in the opposite direction. The major drainage systems share morphological characteristics common to both outflow channels and valley networks. The slopes in this region are dissected by two major Navua drainage systems (here Navua A* and B*) and several shorter, sub-parallel valleys formed on the highest gradient (approximately 20 m/km [1.15°]) slopes, at the lowest part of Hellas Basin's rim. The two major drainage systems originate in the highlands, and empty into the basin. Our mapping suggests that water in Navua Valles reached the basin floor in a complicated descent and included several episodes of surface ponding, surface runoff, infiltration, subsurface flow and subsequent outflow. The most prominent channel system, Navua A, forms a repetitive sequence of deep incision into bedrock, followed by a transition into broad channels in erodible materials, and then into unconfined deposits. This successive erosion-transport-deposition sequence continues to repeat along the valley's entire length forming a discontinuous pattern that is consistent with classical fluvial process models. The channels cut into volcanic plains likely emplaced from the formation of Tyrrhenus and Hadriacus Montes. The dendritic source valleys of Navua A originate from the rim of a highland crater while the rest of this subsystem consists of a single, discontinuous channel which is consistent with a single water source zone that likely supplied water for all channels downslope. These drainages may have formed as discontinuous channels, revealing the potential existence of subsurface drainage pathways located

Control of charged droplets using electrohydrodynamic repulsion for circular droplet patterning

International Nuclear Information System (INIS)

Kim, Bumjoo; Sung, Jungwoo; Lim, Geunbae; Nam, Hyoryung; Kim, Sung Jae; Joo, Sang W

2011-01-01

We report a novel method to form a circular pattern of monodisperse microdroplets using an electrohydrodynamic repulsion (EDR) mechanism. EDR is a phenomenon of electrostatical bounced microdroplets from an accumulated droplet on a bottom substrate. In addition to a regular EDR system, by placing a ring electrode between the capillary and ground substrate, two separate regions were created. A parameter study of two regions was carried out for droplet formation and falling velocity to control the radius of the generated droplets and the circular patterns independently. Based on energy conservation theory, our experimental results showed that the free-falling region exerted crucial influences on the sizes of the circular patterns

Useful forms of the Hamiltonian for ion-optical systems

International Nuclear Information System (INIS)

Davies, W.G.

1991-04-01

The symbiosis of differential algebra and the Lie-algebraic formulation of optics provides a set of very powerful tools for analyzing and understanding the orbit dynamics of complex accelerators up to very high orders. In order to use these tools effectively it is usually necessary to express the Hamiltonian in the appropriate coordinate system. In this report, the relativistic Hamiltonian is derived in curvilinear (the fundamental coordinate system for ion-optics), Cartesian and polar coordinates, in forms suitable for solving problems in ion optics and accelerator physics both with and without the help of differential algebra

Voronoi cell patterns: Theoretical model and applications

Science.gov (United States)

González, Diego Luis; Einstein, T. L.

2011-11-01

We use a simple fragmentation model to describe the statistical behavior of the Voronoi cell patterns generated by a homogeneous and isotropic set of points in 1D and in 2D. In particular, we are interested in the distribution of sizes of these Voronoi cells. Our model is completely defined by two probability distributions in 1D and again in 2D, the probability to add a new point inside an existing cell and the probability that this new point is at a particular position relative to the preexisting point inside this cell. In 1D the first distribution depends on a single parameter while the second distribution is defined through a fragmentation kernel; in 2D both distributions depend on a single parameter. The fragmentation kernel and the control parameters are closely related to the physical properties of the specific system under study. We use our model to describe the Voronoi cell patterns of several systems. Specifically, we study the island nucleation with irreversible attachment, the 1D car-parking problem, the formation of second-level administrative divisions, and the pattern formed by the Paris Métro stations.

From Patterns to Function in Living Systems: Dryland Ecosystems as a Case Study

Science.gov (United States)

Meron, Ehud

2018-03-01

Spatial patterns are ubiquitous in animate matter. Besides their intricate structure and beauty they generally play functional roles. The capacity of living systems to remain functional in changing environments is a question of utmost importance, but its intimate relationship to pattern formation is largely unexplored. Here, we address this relationship using dryland vegetation as a case study. Following a brief introduction to pattern-formation theory, we describe a mathematical model that captures several mechanisms of vegetation pattern formation and discuss ecological contexts that showcase different mechanisms. Using this model, we unravel the different vegetation patterns that keep dryland ecosystems viable along the rainfall gradient, identify multistability ranges where fronts separating domains of alternative stable states exist, and highlight the roles of front dynamics in mitigating or reversing desertification. The utility of satellite images in testing model predictions is discussed. An outlook on outstanding open problems concludes this paper.

Chaos synchronization and chaotization of complex chaotic systems in series form by optimal control

International Nuclear Information System (INIS)

Ge Zhengming; Yang, C.-H.

2009-01-01

By the method of quadratic optimum control, a quadratic optimal regulator is used for synchronizing two complex chaotic systems in series form. By this method the least error with less control energy is achieved, and the optimization on both energy and error is realized synthetically. The simulation results of two Quantum-CNN chaos systems in series form prove the effectiveness of this method. Finally, chaotization of the system is given by optimal control.

Fuzzy tree automata and syntactic pattern recognition.

Science.gov (United States)

Lee, E T

1982-04-01

An approach of representing patterns by trees and processing these trees by fuzzy tree automata is described. Fuzzy tree automata are defined and investigated. The results include that the class of fuzzy root-to-frontier recognizable ¿-trees is closed under intersection, union, and complementation. Thus, the class of fuzzy root-to-frontier recognizable ¿-trees forms a Boolean algebra. Fuzzy tree automata are applied to processing fuzzy tree representation of patterns based on syntactic pattern recognition. The grade of acceptance is defined and investigated. Quantitative measures of ``approximate isosceles triangle,'' ``approximate elongated isosceles triangle,'' ``approximate rectangle,'' and ``approximate cross'' are defined and used in the illustrative examples of this approach. By using these quantitative measures, a house, a house with high roof, and a church are also presented as illustrative examples. In addition, three fuzzy tree automata are constructed which have the capability of processing the fuzzy tree representations of ``fuzzy houses,'' ``houses with high roofs,'' and ``fuzzy churches,'' respectively. The results may have useful applications in pattern recognition, image processing, artificial intelligence, pattern database design and processing, image science, and pictorial information systems.

Emerging Interaction Patterns in the Emiliania huxleyi-EhV System.

Science.gov (United States)

Ruiz, Eliana; Oosterhof, Monique; Sandaa, Ruth-Anne; Larsen, Aud; Pagarete, António

2017-03-22

Viruses are thought to be fundamental in driving microbial diversity in the oceanic planktonic realm. That role and associated emerging infection patterns remain particularly elusive for eukaryotic phytoplankton and their viruses. Here we used a vast number of strains from the model system Emiliania huxleyi /Emiliania huxleyi Virus to quantify parameters such as growth rate (µ), resistance (R), and viral production (Vp) capacities. Algal and viral abundances were monitored by flow cytometry during 72-h incubation experiments. The results pointed out higher viral production capacity in generalist EhV strains, and the virus-host infection network showed a strong co-evolution pattern between E. huxleyi and EhV populations. The existence of a trade-off between resistance and growth capacities was not confirmed.

Staffing Patterns in Public School Systems: Current Status and Trends, Update 2001. Research Snapshot.

Science.gov (United States)

Williams, Alicia D.; Protheroe, Nancy; Parks, Michael C.

Staffing patterns in American public-school systems are presented in this report of the 2000-01 school year. The report addresses the following: why information about staffing ratios is important; how many people currently work in public schools; what proportion of these are teachers, administrators, and support staff; current staffing patterns in…

Differential abundances of four forms of Binder of SPerm 1 in the seminal plasma of Bos taurus indicus bulls with different patterns of semen freezability.

Science.gov (United States)

Magalhães, Marcos Jorge; Martins, Leonardo Franco; Senra, Renato Lima; Santos, Thaís Ferreira Dos; Okano, Denise Silva; Pereira, Paulo Roberto Gomes; Faria-Campos, Alessandra; Campos, Sérgio Vale Aguiar; Guimarães, José Domingos; Baracat-Pereira, Maria Cristina

2016-08-01

The Binder of SPerm 1 (BSP1) protein is involved in the fertilization and semen cryopreservation processes and is described to be both beneficial and detrimental to sperm. Previously, the relationship of BSP1 with freezability events has not been completely understood. The objective of this work was to determine the differential abundance of the forms of the BSP1 protein in cryopreserved seminal plasma of Bos taurus indicus bulls with different patterns of semen freezability using proteomics. A wide cohort of adult bulls with high genetic value from an artificial insemination center was used as donors of high quality, fresh semen. Nine bulls presenting different patterns of semen freezability were selected. Two-dimensional gel electrophoresis showed differential abundance in a group of seven protein spots in the frozen/thawed seminal plasma from the bulls, ranging from 15 to 17 kDa, with pI values from 4.6 to 5.8. Four of these spots were confirmed to be BSP1 using mass spectrometry, proteomics, biochemical, and computational analysis (Tukey's test at P semen freezability and its absence in bulls presenting high semen freezability. This is the first report showing that more than two forms of BSP1 are found in the seminal plasma of Nelore adult bulls and not all animals have a similar abundance of each BSP1 form. Different BSP1 forms may be involved in different events of fertilization and the cryopreservation process. Copyright © 2016 Elsevier Inc. All rights reserved.

System-dependent regulations of colour-pattern development: a mutagenesis study of the pale grass blue butterfly

Science.gov (United States)

Iwata, Masaki; Hiyama, Atsuki; Otaki, Joji M.

2013-01-01

Developmental studies on wing colour patterns have been performed in nymphalid butterflies, but efficient genetic manipulations, including mutagenesis, have not been well established. Here, we have performed mutagenesis experiments in a lycaenid butterfly, the pale grass blue Zizeeria maha, to produce colour-pattern mutants. We fed the P-generation larvae an artificial diet containing the mutagen ethyl methane sulfonate (EMS), and the F1- and F2-generation adults showed various aberrant colour patterns: dorsoventral transformation, anterioposterior background colouration gap, weak contrast, disarrangement of spots, reduction of the size of spots, loss of spots, fusion of spots, and ectopic spots. Among them, the disarrangement, reduction, and loss of spots were likely produced by the coordinated changes of many spots of a single wing around the discal spot in a system-dependent manner, demonstrating the existence of the central symmetry system. The present study revealed multiple genetic regulations for system-dependent and wing-wide colour-pattern determination in lycaenid butterflies. PMID:23917124

Nonlinear Dynamic Analysis and Optimization of Closed-Form Planetary Gear System

Directory of Open Access Journals (Sweden)

Qilin Huang

2013-01-01

Full Text Available A nonlinear purely rotational dynamic model of a multistage closed-form planetary gear set formed by two simple planetary stages is proposed in this study. The model includes time-varying mesh stiffness, excitation fluctuation and gear backlash nonlinearities. The nonlinear differential equations of motion are solved numerically using variable step-size Runge-Kutta. In order to obtain function expression of optimization objective, the nonlinear differential equations of motion are solved analytically using harmonic balance method (HBM. Based on the analytical solution of dynamic equations, the optimization mathematical model which aims at minimizing the vibration displacement of the low-speed carrier and the total mass of the gear transmission system is established. The optimization toolbox in MATLAB program is adopted to obtain the optimal solution. A case is studied to demonstrate the effectiveness of the dynamic model and the optimization method. The results show that the dynamic properties of the closed-form planetary gear transmission system have been improved and the total mass of the gear set has been decreased significantly.

Electricity deregulation, spot price patterns and demand-side management

International Nuclear Information System (INIS)

Li, Y.; Flynn, P.C.

2006-01-01

This paper examines extensive hourly or half-hourly power price data from 14 deregulated power markets. It analyzes average diurnal patterns, relationship to system load, volatility, and consistency over time. Diurnal patterns indicate the average price spread between off-peak and on-peak and weekend vs. weekday power consumption. Volatility is measured by price velocity: the average normalized hourly change in power price, calculated daily. The calculated price velocity is broken down into an expected component that arises from the diurnal pattern and an unexpected component that arises from unknown factors. The analysis reveals significant differences among markets, suggesting that demand-side management (DSM) of power consumption is far more difficult in some markets than in others. At one extreme, Spain, Britain and Scandinavia show consistent diurnal price patterns, a stable relationship between price and system load, and a low unexplained component of price volatility. A power consumer in these markets could form a reasonable expectation of a reward for DSM of elective power consumption. At the other extreme, two markets in Australia show erratic diurnal price patterns from year to year, low correlation between price and system load, and a high amount of unexpected price velocity. A power consumer in these markets would have far greater difficulty in realizing a benefit from DSM. Markets that experienced one period of very high prices without a clear external cause, such as California and Alberta, appear to have a significant longer-term erosion of public support for deregulation. (author)

Pattern optimizing verification of self-align quadruple patterning

Science.gov (United States)

Yamato, Masatoshi; Yamada, Kazuki; Oyama, Kenichi; Hara, Arisa; Natori, Sakurako; Yamauchi, Shouhei; Koike, Kyohei; Yaegashi, Hidetami

2017-03-01

Lithographic scaling continues to advance by extending the life of 193nm immersion technology, and spacer-type multi-patterning is undeniably the driving force behind this trend. Multi-patterning techniques such as self-aligned double patterning (SADP) and self-aligned quadruple patterning (SAQP) have come to be used in memory devices, and they have also been adopted in logic devices to create constituent patterns in the formation of 1D layout designs. Multi-patterning has consequently become an indispensible technology in the fabrication of all advanced devices. In general, items that must be managed when using multi-patterning include critical dimension uniformity (CDU), line edge roughness (LER), and line width roughness (LWR). Recently, moreover, there has been increasing focus on judging and managing pattern resolution performance from a more detailed perspective and on making a right/wrong judgment from the perspective of edge placement error (EPE). To begin with, pattern resolution performance in spacer-type multi-patterning is affected by the process accuracy of the core (mandrel) pattern. Improving the controllability of CD and LER of the mandrel is most important, and to reduce LER, an appropriate smoothing technique should be carefully selected. In addition, the atomic layer deposition (ALD) technique is generally used to meet the need for high accuracy in forming the spacer film. Advances in scaling are accompanied by stricter requirements in the controllability of fine processing. In this paper, we first describe our efforts in improving controllability by selecting the most appropriate materials for the mandrel pattern and spacer film. Then, based on the materials selected, we present experimental results on a technique for improving etching selectivity.

Modeling of the fault-controlled hydrothermal ore-forming systems

International Nuclear Information System (INIS)

Pek, A.A.; Malkovsky, V.I.

1993-07-01

A necessary precondition for the formation of hydrothermal ore deposits is a strong focusing of hydrothermal flow as fluids move from the fluid source to the site of ore deposition. The spatial distribution of hydrothermal deposits favors the concept that such fluid flow focusing is controlled, for the most part, by regional faults which provide a low resistance path for hydrothermal solutions. Results of electric analog simulations, analytical solutions, and computer simulations of the fluid flow, in a fault-controlled single-pass advective system, confirm this concept. The influence of the fluid flow focusing on the heat and mass transfer in a single-pass advective system was investigated for a simplified version of the metamorphic model for the genesis of greenstone-hosted gold deposits. The spatial distribution of ore mineralization, predicted by computer simulation, is in reasonable agreement with geological observations. Computer simulations of the fault-controlled thermoconvective system revealed a complex pattern of mixing hydrothermal solutions in the model, which also simulates the development of the modern hydrothermal systems on the ocean floor. The specific feature of the model considered, is the development under certain conditions of an intra-fault convective cell that operates essentially independently of the large scale circulation. These and other results obtained during the study indicate that modeling of natural fault-controlled hydrothermal systems is instructive for the analysis of transport processes in man-made hydrothermal systems that could develop in geologic high-level nuclear waste repositories

Pattern specification in the insect embryo. [uv radiation, Smittia

Energy Technology Data Exchange (ETDEWEB)

Sander, K

1975-01-01

Specification of developmental pathways by specific determining substances prelocalized in the egg cytoplasm is discussed using the so-called germ cell determinants as an example. Some theoretical considerations speak against the assumption that in insects the various elements of the basic body plan are specified by a prelocalized mosaic of specific determinants. Experimental evidence also points towards a largely epigenetic mode of pattern specification. The process of axial pattern specification can be altered drastically by experiment: in some insects, tail ends may be formed in place of head parts and identical sequences of body segments may be specified two or even three times along the longitudinal egg axis. The experimental results indicate that polarity and regional character of pattern elements formed are specified by one and the same influence, and that this influence can be shifted to or simulated in various other egg regions by transposition or elimination of egg components, or by uv irradiation. Evidence obtained from several types of experiment in the chironomid midge Smittia points towards a key role for local metabolism or energy charge in determination of cell polarity and in pattern spcification. A model for embryonic pattern specification involving differential reaction of cells to a system of longitudinal gradients, which was proposed in 1960, can in principle formally account for all results described. Some striking coincidences of model and experimental results with Wolpert's concept of positional information are noted. Finally it is pointed out that universality of mechanisms for pattern specification is much more likely with respect to formal principles than at the level of their physiological realization.

Embedding the Form Generator in a Content Management System

Science.gov (United States)

Delgado, A.; Wicenec, A.; Delmotte, N.; Tejero, A.

2008-08-01

Given the tremendous amount of data generated by ESO's telescopes and the rapid evolution of the World Wide Web, the ESO archive web interface needs to offer more flexible services and advanced functionalities to a growing community of users all over the world. To achieve this endeavour, a query form generator is being developed inside a Content Management System. We present here a progress report.

Synchronization of complex chaotic systems in series expansion form

International Nuclear Information System (INIS)

Ge Zhengming; Yang Chenghsiung

2007-01-01

This paper studies the synchronization of complex chaotic systems in series expansion form by Lyapunov asymptotical stability theorem. A sufficient condition is given for the asymptotical stability of an error dynamics, and is applied to guiding the design of the secure communication. Finally, numerical results are studied for the Quantum-CNN oscillators synchronizing with unidirectional/bidirectional linear coupling to show the effectiveness of the proposed synchronization strategy

A comparison study on algorithms of detecting long forms for short forms in biomedical text

Directory of Open Access Journals (Sweden)

Wu Cathy H

2007-11-01

Full Text Available Abstract Motivation With more and more research dedicated to literature mining in the biomedical domain, more and more systems are available for people to choose from when building literature mining applications. In this study, we focus on one specific kind of literature mining task, i.e., detecting definitions of acronyms, abbreviations, and symbols in biomedical text. We denote acronyms, abbreviations, and symbols as short forms (SFs and their corresponding definitions as long forms (LFs. The study was designed to answer the following questions; i how well a system performs in detecting LFs from novel text, ii what the coverage is for various terminological knowledge bases in including SFs as synonyms of their LFs, and iii how to combine results from various SF knowledge bases. Method We evaluated the following three publicly available detection systems in detecting LFs for SFs: i a handcrafted pattern/rule based system by Ao and Takagi, ALICE, ii a machine learning system by Chang et al., and iii a simple alignment-based program by Schwartz and Hearst. In addition, we investigated the conceptual coverage of two terminological knowledge bases: i the UMLS (the Unified Medical Language System, and ii the BioThesaurus (a thesaurus of names for all UniProt protein records. We also implemented a web interface that provides a virtual integration of various SF knowledge bases. Results We found that detection systems agree with each other on most cases, and the existing terminological knowledge bases have a good coverage of synonymous relationship for frequently defined LFs. The web interface allows people to detect SF definitions from text and to search several SF knowledge bases. Availability The web site is http://gauss.dbb.georgetown.edu/liblab/SFThesaurus.

Application of pattern search method to power system security constrained economic dispatch with non-smooth cost function

International Nuclear Information System (INIS)

Al-Othman, A.K.; El-Naggar, K.M.

2008-01-01

Direct search methods are evolutionary algorithms used to solve optimization problems. (DS) methods do not require any information about the gradient of the objective function at hand while searching for an optimum solution. One of such methods is Pattern Search (PS) algorithm. This paper presents a new approach based on a constrained pattern search algorithm to solve a security constrained power system economic dispatch problem (SCED) with non-smooth cost function. Operation of power systems demands a high degree of security to keep the system satisfactorily operating when subjected to disturbances, while and at the same time it is required to pay attention to the economic aspects. Pattern recognition technique is used first to assess dynamic security. Linear classifiers that determine the stability of electric power system are presented and added to other system stability and operational constraints. The problem is formulated as a constrained optimization problem in a way that insures a secure-economic system operation. Pattern search method is then applied to solve the constrained optimization formulation. In particular, the method is tested using three different test systems. Simulation results of the proposed approach are compared with those reported in literature. The outcome is very encouraging and proves that pattern search (PS) is very applicable for solving security constrained power system economic dispatch problem (SCED). In addition, valve-point effect loading and total system losses are considered to further investigate the potential of the PS technique. Based on the results, it can be concluded that the PS has demonstrated ability in handling highly nonlinear discontinuous non-smooth cost function of the SCED. (author)

Compact holographic optical neural network system for real-time pattern recognition

Science.gov (United States)

Lu, Taiwei; Mintzer, David T.; Kostrzewski, Andrew A.; Lin, Freddie S.

1996-08-01

One of the important characteristics of artificial neural networks is their capability for massive interconnection and parallel processing. Recently, specialized electronic neural network processors and VLSI neural chips have been introduced in the commercial market. The number of parallel channels they can handle is limited because of the limited parallel interconnections that can be implemented with 1D electronic wires. High-resolution pattern recognition problems can require a large number of neurons for parallel processing of an image. This paper describes a holographic optical neural network (HONN) that is based on high- resolution volume holographic materials and is capable of performing massive 3D parallel interconnection of tens of thousands of neurons. A HONN with more than 16,000 neurons packaged in an attache case has been developed. Rotation- shift-scale-invariant pattern recognition operations have been demonstrated with this system. System parameters such as the signal-to-noise ratio, dynamic range, and processing speed are discussed.

Differentiation of mass-forming focal pancreatitis from pancreatic ductal adenocarcinoma: value of characterizing dynamic enhancement patterns on contrast-enhanced MR images by adding signal intensity color mapping

Energy Technology Data Exchange (ETDEWEB)

Kim, Mimi [Hanyang University College of Medicine, Department of Radiology, Hanyang Medical Center, Seoul (Korea, Republic of); Jang, Kyung Mi [Sungkyunkwan University School of Medicine, Department of Radiology, Samsung Medical Center, Seoul (Korea, Republic of); Sungkyunkwan University School of Medicine, Department of Radiology and Center for Imaging Science, Samsung Medical Center, Seoul (Korea, Republic of); Kim, Jae-Hun; Jeong, Woo Kyoung; Kim, Seong Hyun; Kang, Tae Wook; Kim, Young Kon; Cha, Dong Ik [Sungkyunkwan University School of Medicine, Department of Radiology, Samsung Medical Center, Seoul (Korea, Republic of); Kim, Kyunga [Samsung Medical Center, Biostatics and Clinical Epidemiology Center, Research Institute for Future Medicine, Seoul (Korea, Republic of)

2017-04-15

To evaluate the value of dynamic enhancement patterns on contrast-enhanced MR images by adding signal intensity colour mapping (SICM) to differentiate mass-forming focal pancreatitis (MFFP) from pancreatic ductal adenocarcinoma (PDAC). Forty-one clinicopathologically proven MFFPs and 144 surgically confirmed PDACs were enrolled. Laboratory and MR imaging parameters were used to differentiate MFFP from PDAC. In particular, enhancement patterns on MR images adding SICM were evaluated. By using classification tree analysis (CTA), we determined the predictors for the differentiation of MFFP from PDAC. In the CTA, with all parameters except enhancement pattern on SICM images, ductal obstruction grade and T1 hypointensity grade of the pancreatic lesion were the first and second splitting predictor for differentiation of MFFP from PDAC, in order. By adding an enhancement pattern on the SICM images to CTA, the enhancement pattern was the only splitting predictor to differentiate MFFP from PDAC. The CTA model including enhancement pattern on SICM images has sensitivity of 78.0 %, specificity of 99.3 %, and accuracy of 94.6 % for differentiating MFFP from PDAC. The characterization of enhancement pattern for pancreatic lesions on contrast-enhanced MR images adding SICM would be helpful to differentiate MFFP from PDAC. (orig.)

The startle pattern in the minor form of hyperekplexia

NARCIS (Netherlands)

Tijssen, M. A.; Padberg, G. W.; van Dijk, J. G.

1996-01-01

BACKGROUND: The major and minor forms of hereditary hyperekplexia (HE) are characterized by excessive startle responses, which are accompanied by transient stiffness only in major HE; patients with major HE also have continuous stiffness during infancy. A point mutation has been identified for major

High resolution computed tomography in patients with various forms of systemic sclerosis

International Nuclear Information System (INIS)

Lewszuk, A.; Rozycki, J.; Tarasow, E.; Kowal-Bielecka, O.

2008-01-01

Pulmonary lesions are, besides renal and cardiac complications, one of the main causes of mortality among patients with systemic sclerosis (scleroderma). Pathologic changes in the respiratory system take the form of interstitial fibrosis clinically manifested by progressive exertion dyspnea and abnormalities of respiratory restriction type in functional tests. The aim of the study was systematization of pulmonary lesion symptomatology in conventional chest radiography and high resolution computed tomography (HRCT) in patients with various forms of scleroderma, as well as determination of the frequency and localization of the particular lesion types. The study was carried out in a group of 49 patients with systemic sclerosis (47 women and 2 men), who underwent conventional radiography and high resolution computed tomography of the chest. In patients with systemic sclerosis, HRCT revealed most frequently interstitial changes of ground glass type, as well as linear and reticular opacities, whereas bronchiectasis and honeycombing type lesions were less frequent. Pulmonary lesions were seen with increasing frequency towards the lung base and were localized mainly in the posterior, inferior and peripheral parts of the lungs. Comparison of the patients with limited and diffuse scleroderma demonstrated that the diffuse form is associated with more frequent involvement of the respiratory system and more advanced pulmonary lesions. The observed characteristics of pulmonary lesions show similarity between interstitial lung disease in the course of systemic sclerosis and nonspecific interstitial pneumonia (NSIP), which supports classification of interstitial lung disease associated with scleroderma as belonging to that group of interstitial inflammations. (author)

Butterfly patterns in a sheared lamellar-system

Energy Technology Data Exchange (ETDEWEB)

Lindner, P [Institut Max von Laue - Paul Langevin (ILL), 38 - Grenoble (France); Zipfel, J; Richtering, W [Freiburg Univ. (Germany)

1997-04-01

A technologically important extension of `classical` scattering techniques is to investigate soft-matter systems under non-equilibrium conditions. Shear flow is known to have a profound influence on the structure and orientation of complex fluids like thermotropic or lyotropic liquid-crystals, colloidal and polymeric solutions. There is a fundamental interest in understanding the microscopic structure and dynamics of such complex fluids as the macroscopic material properties might change with the application of an external perturbation like shear. The following example illustrates a recent study of the influence of shear on the structure of a lyotropic lamellar phase. Results using a cone-and-plate and the ILL Couette type shear-cell were obtained by rheo-small-angle light scattering (rheo-SALS) and small-angle neutron scattering (SANS) at D11. Because of the broad range of momentum transfer Q available at D11 a characteristic butterfly-pattern with a scattering peak revealing both the structure and the supramolecular structure of the system could be detected at very low Q. (author). 5 refs.

On Assisting a Visual-Facial Affect Recognition System with Keyboard-Stroke Pattern Information

Science.gov (United States)

Stathopoulou, I.-O.; Alepis, E.; Tsihrintzis, G. A.; Virvou, M.

Towards realizing a multimodal affect recognition system, we are considering the advantages of assisting a visual-facial expression recognition system with keyboard-stroke pattern information. Our work is based on the assumption that the visual-facial and keyboard modalities are complementary to each other and that their combination can significantly improve the accuracy in affective user models. Specifically, we present and discuss the development and evaluation process of two corresponding affect recognition subsystems, with emphasis on the recognition of 6 basic emotional states, namely happiness, sadness, surprise, anger and disgust as well as the emotion-less state which we refer to as neutral. We find that emotion recognition by the visual-facial modality can be aided greatly by keyboard-stroke pattern information and the combination of the two modalities can lead to better results towards building a multimodal affect recognition system.

Form of Government and Political System: Conditions of Impossibility

Directory of Open Access Journals (Sweden)

Bogdan Iancu

2012-12-01

Full Text Available Successful constitutions manage to predetermine in juridical frame the political life of a country, by imposing a durable core equilibrium, i.e., a specific political system. The integrative function of the constitution derives from a reflexive political decision, at the constitution-making moment, for a specific form. The current theoretical difficulty in characterizing with precision the political system established by the Constitution of 1991 reflects the syncopated constitutional conflicts of recent years. The instability can be traced back to the continued absence of the preconditions for a genuine constitutional foundation. The initial indecision has been reinforced by later influences, including the EU accession process.

Optimizing Client Latency in a Distributed System by Using the “Remote Façade” Design Pattern

Directory of Open Access Journals (Sweden)

Cosmin RABLOU

2010-01-01

Full Text Available In this paper we investigate the role of the Remote Façade pattern in the optimization of dis-tributed systems. The intent of this pattern is to wrap fine-grained remote objects in a coarse-grained interface and thus greatly reduce the total number of calls executed over the network. The measurement of the performance gain achieved by implementing this pattern is done through testing with a distributed application written in C# and using the latest Microsoft framework for distributed systems (Windows Communication Framework. Furthermore, we will be presenting the scenarios in which the implementation of the Remote Façade pattern brings a significant performance gain. Finally we show further scenarios in which the per-formance brought by this pattern can be investigated.

Atlas Career Path Guidebook: Patterns and Common Practices in Systems Engineers’ Development

Science.gov (United States)

2018-01-16

text mining principles to be used by systems...statistical and text mining principles facilitate the identification of patterns. Figure 1. Helix methodology for career path analysis In order to...illustrate how text mining algorithms might be used to identify similarities in position titles for systems engineers. In broad

Heuristics Miner for E-Commerce Visitor Access Pattern Representation

OpenAIRE

Kartina Diah Kesuma Wardhani; Wawan Yunanto

2017-01-01

E-commerce click stream data can form a certain pattern that describe visitor behavior while surfing the e-commerce website. This pattern can be used to initiate a design to determine alternative access sequence on the website. This research use heuristic miner algorithm to determine the pattern. σ-Algorithm and Genetic Mining are methods used for pattern recognition with frequent sequence item set approach. Heuristic Miner is an evolved form of those methods. σ-Algorithm assume that an activ...

Considering User's Access Pattern in Multimedia File Systems

Science.gov (United States)

Cho, KyoungWoon; Ryu, YeonSeung; Won, Youjip; Koh, Kern

2002-12-01

Legacy buffer cache management schemes for multimedia server are grounded at the assumption that the application sequentially accesses the multimedia file. However, user access pattern may not be sequential in some circumstances, for example, in distance learning application, where the user may exploit the VCR-like function(rewind and play) of the system and accesses the particular segments of video repeatedly in the middle of sequential playback. Such a looping reference can cause a significant performance degradation of interval-based caching algorithms. And thus an appropriate buffer cache management scheme is required in order to deliver desirable performance even under the workload that exhibits looping reference behavior. We propose Adaptive Buffer cache Management(ABM) scheme which intelligently adapts to the file access characteristics. For each opened file, ABM applies either the LRU replacement or the interval-based caching depending on the Looping Reference Indicator, which indicates that how strong temporally localized access pattern is. According to our experiment, ABM exhibits better buffer cache miss ratio than interval-based caching or LRU, especially when the workload exhibits not only sequential but also looping reference property.

Properties of incident reporting systems in relation to statistical trend and pattern analysis

International Nuclear Information System (INIS)

Kalfsbeek, H.W.; Arsenis, S.P.

1990-01-01

This paper describes the properties deemed desirable for an incident reporting system in order to render it useful for extracting valid statistical trend and pattern information. The perspective under which a data collection system is seen in this paper is the following: data are essentially gathered on a set of variables describing an event or incident (the items featuring on a reporting format) in order to learn about (multiple) dependencies (called interactions) between these variables. Hence, the necessary features of the data source are highlighted and potential problem sources limiting the validity of the results to be obtained are identified. In this frame, important issues are the reporting completeness, related to the reporting criteria and reporting frequency, and of course the reporting contents and quality. The choice of the report items (the variables) and their categorization (code dictionary) may influence (bias) the insights gained from trend and pattern analyses, as may the presence or absence of a structure for correlating the reported issues within an incident. The issues addressed in this paper are brought in relation to some real world reporting systems on safety related events in Nuclear Power Plants, so that their possibilities and limitations with regard to statistical trend and pattern analysis become manifest

Patterned microstructures formed with MeV Au implantation in Si(1 0 0)

International Nuclear Information System (INIS)

Rout, Bibhudutta; Greco, Richard R.; Zachry, Daniel P.; Dymnikov, Alexander D.; Glass, Gary A.

2006-01-01

Energetic (MeV) Au implantation in Si(1 0 0) (n-type) through masked micropatterns has been used to create layers resistant to KOH wet etching. Microscale patterns were produced in PMMA and SU(8) resist coatings on the silicon substrates using P-beam writing and developed. The silicon substrates were subsequently exposed using 1.5 MeV Au 3+ ions with fluences as high as 1 x 10 16 ions/cm 2 and additional patterns were exposed using copper scanning electron microscope calibration grids as masks on the silicon substrates. When wet etched with KOH microstructures were created in the silicon due to the resistance to KOH etching cause by the Au implantation. The process of combining the fabrication of masked patterns with P-beam writing with broad beam Au implantation through the masks can be a promising, cost-effective process for nanostructure engineering with Si

Wafer-Level Packaging Method for RF MEMS Applications Using Pre-Patterned BCB Polymer

OpenAIRE

Zhuhao Gong; Yulong Zhang; Xin Guo; Zewen Liu

2018-01-01

A radio-frequency micro-electro-mechanical system (RF MEMS) wafer-level packaging (WLP) method using pre-patterned benzo-cyclo-butene (BCB) polymers with a high-resistivity silicon cap is proposed to achieve high bonding quality and excellent RF performance. In this process, the BCB polymer was pre-defined to form the sealing ring and bonding layer by the spin-coating and patterning of photosensitive BCB before the cavity formation. During anisotropic wet etching of the silicon wafer to gener...

PatterNet: a system to learn compact physical design pattern representations for pattern-based analytics

Science.gov (United States)

Lutich, Andrey

2017-07-01

This research considers the problem of generating compact vector representations of physical design patterns for analytics purposes in semiconductor patterning domain. PatterNet uses a deep artificial neural network to learn mapping of physical design patterns to a compact Euclidean hyperspace. Distances among mapped patterns in this space correspond to dissimilarities among patterns defined at the time of the network training. Once the mapping network has been trained, PatterNet embeddings can be used as feature vectors with standard machine learning algorithms, and pattern search, comparison, and clustering become trivial problems. PatterNet is inspired by the concepts developed within the framework of generative adversarial networks as well as the FaceNet. Our method facilitates a deep neural network (DNN) to learn directly the compact representation by supplying it with pairs of design patterns and dissimilarity among these patterns defined by a user. In the simplest case, the dissimilarity is represented by an area of the XOR of two patterns. Important to realize that our PatterNet approach is very different to the methods developed for deep learning on image data. In contrast to "conventional" pictures, the patterns in the CAD world are the lists of polygon vertex coordinates. The method solely relies on the promise of deep learning to discover internal structure of the incoming data and learn its hierarchical representations. Artificial intelligence arising from the combination of PatterNet and clustering analysis very precisely follows intuition of patterning/optical proximity correction experts paving the way toward human-like and human-friendly engineering tools.

Beam-scanning system for determination of beam profiles and form factors in merged-beam experiments

International Nuclear Information System (INIS)

Keyser, C.J.; Froelich, H.R.; Mitchell, J.B.A.; McGowan, J.W.

1979-01-01

A beam-scanning system for a merged electron-ion beam experiment is described. This system is used to determine the horizontal and vertical beam profiles and the form factors at three different locations along the axis of the beams. Design details of the wedge-shaped scanners and the electronic circuit for obtaining beam profiles and form factors are described. The form factor derivation for merged beams is given and an expression in terms of measured quantities is derived. (author)

Classification of time series patterns from complex dynamic systems

Energy Technology Data Exchange (ETDEWEB)

Schryver, J.C.; Rao, N.

1998-07-01

An increasing availability of high-performance computing and data storage media at decreasing cost is making possible the proliferation of large-scale numerical databases and data warehouses. Numeric warehousing enterprises on the order of hundreds of gigabytes to terabytes are a reality in many fields such as finance, retail sales, process systems monitoring, biomedical monitoring, surveillance and transportation. Large-scale databases are becoming more accessible to larger user communities through the internet, web-based applications and database connectivity. Consequently, most researchers now have access to a variety of massive datasets. This trend will probably only continue to grow over the next several years. Unfortunately, the availability of integrated tools to explore, analyze and understand the data warehoused in these archives is lagging far behind the ability to gain access to the same data. In particular, locating and identifying patterns of interest in numerical time series data is an increasingly important problem for which there are few available techniques. Temporal pattern recognition poses many interesting problems in classification, segmentation, prediction, diagnosis and anomaly detection. This research focuses on the problem of classification or characterization of numerical time series data. Highway vehicles and their drivers are examples of complex dynamic systems (CDS) which are being used by transportation agencies for field testing to generate large-scale time series datasets. Tools for effective analysis of numerical time series in databases generated by highway vehicle systems are not yet available, or have not been adapted to the target problem domain. However, analysis tools from similar domains may be adapted to the problem of classification of numerical time series data.

Patterns of enterprise system implementation - the case of Chinese aerospace corporate transformation

NARCIS (Netherlands)

Ma, Xiaofeng

2008-01-01

This dissertation aims to identify patterns in the managerial processes during an enterprise system implementation (ESI) period. An ESI remains a notorious challenge. In most cases, it concurrently involves business strategy change, organizational change, and technical innovation. This dissertation

Colony shape as a genetic trait in the pattern-forming Bacillus mycoides

Directory of Open Access Journals (Sweden)

Pisaneschi Giuseppe

2002-11-01

Full Text Available Abstract Background Bacillus mycoides Flügge, a Gram-positive, non-motile soil bacterium assigned to Bacillus cereus group, grows on agar as chains of cells linked end to end, forming radial filaments curving clock- or counter-clockwise (SIN or DX morphotypes. The molecular mechanism causing asymmetric curving is not known: our working hypothesis considers regulation of filamentous growth as the prerequisite for these morphotypes. Results SIN and DX strains isolated from the environment were classified as B. mycoides by biochemical and molecular biology tests. Growth on agar of different hardness and nutrient concentration did not abolish colony patterns, nor was conversion between SIN and DX morphotypes ever noticed. A number of morphotype mutants, all originating from one SIN strain, were obtained. Some lost turn direction becoming fluffy, others became round and compact. All mutants lost wild type tight aggregation in liquid culture. Growth on agar was followed by microscopy, exploring the process of colony formation and details of cell divisions. A region of the dcw (division cell wall cluster, including ftsQ, ftsA, ftsZ and murC, was sequenced in DX and SIN strains as a basis for studying cell division. This confirmed the relatedness of DX and SIN strains to the B. cereus group. Conclusions DX and SIN asymmetric morphotypes stem from a close but not identical genomic context. Asymmetry is established early during growth on agar. Wild type bacilli construct mostly uninterrupted filaments with cells dividing at the free ends: they "walk" longer distances compared to mutants, where enhanced frequency of cell separation produces new growing edges resulting in round compact colonies.

Relativistic instant-form approach to the structure of two-body composite systems

International Nuclear Information System (INIS)

Krutov, A.F.; Troitsky, V.E.

2002-01-01

An approach to the electroweak properties of two-particle composite systems is developed. The approach is based on the use of the instant form of relativistic Hamiltonian dynamics. The main feature of this approach is the method of construction of the matrix element of the electroweak current operator. The electroweak current matrix element satisfies the relativistic covariance conditions and in the case of the electromagnetic current also the conservation law automatically. The properties of the system as well as the approximations are formulated in terms of form factors. The approach makes it possible to formulate relativistic impulse approximation in such a way that the Lorentz covariance of the current is ensured. In the electromagnetic case the current conservation law is also ensured. Our approach gives good results for the pion electromagnetic form factor in the whole range of momentum transfers available for experiments at present time, as well as for the lepton decay constant of pions

Entropy criteria applied to pattern selection in systems with free boundaries

Science.gov (United States)

Kirkaldy, J. S.

1985-10-01

The steady state differential or integral equations which describe patterned dissipative structures, typically to be identified with first order phase transformation morphologies like isothermal pearlites, are invariably degenerate in one or more order parameters (the lamellar spacing in the pearlite case). It is often observed that a different pattern is attained at the steady state for each initial condition (the hysteresis or metastable case). Alternatively, boundary perturbations and internal fluctuations during transition up to, or at the steady state, destroy the path coherence. In this case a statistical ensemble of imperfect patterns often emerges which represents a fluctuating but recognizably patterned and unique average steady state. It is cases like cellular, lamellar pearlite, involving an assembly of individual cell patterns which are regularly perturbed by local fluctuation and growth processes, which concern us here. Such weakly fluctuating nonlinear steady state ensembles can be arranged in a thought experiment so as to evolve as subsystems linking two very large mass-energy reservoirs in isolation. Operating on this discontinuous thermodynamic ideal, Onsager’s principle of maximum path probability for isolated systems, which we interpret as a minimal time correlation function connecting subsystem and baths, identifies the stable steady state at a parametric minimum or maximum (or both) in the dissipation rate. This nonlinear principle is independent of the Principle of Minimum Dissipation which is applicable in the linear regime of irreversible thermodynamics. The statistical argument is equivalent to the weak requirement that the isolated system entropy as a function of time be differentiable to the second order despite the macroscopic pattern fluctuations which occur in the subsystem. This differentiability condition is taken for granted in classical stability theory based on the 2nd Law. The optimal principle as applied to isothermal and

Neural-network-based system for recognition of partially occluded shapes and patterns

Science.gov (United States)

Mital, Dinesh P.; Teoh, Eam-Khwang; Amarasinghe, S. K.; Suganthan, P. N.

1996-10-01

The purpose of this paper is to demonstrate how a structural matching approach can be used to perfonn effective rotational invariant fingerprint identification. In this approach, each of the exiracted features is correlated with Live of its nearest neighbouring features to form a local feature gmup for a first-stage matching. After that, the feature with the highest match is used as a central feature whereby all the other features are correlated to form a global feature group for a second.stage matching. The correlation between the features is in terms of distance and relative angle. This approach actually make the matching method rotational invariant A substantial amount of testing was carried out and it shows that this matching technique is capable of matching the four basic fingerprint patterns with an average matching time of4 seconds on a 66Mhz, 486 DX personal computer.

Analysis of Fringe Field Formed Inside LDA Measurement Volume Using Compact Two Hololens Imaging Systems

Science.gov (United States)

Ghosh, Abhijit; Nirala, A. K.; Yadav, H. L.

2018-03-01

We have designed and fabricated four LDA optical setups consisting of aberration compensated four different compact two hololens imaging systems. We have experimentally investigated and realized a hololens recording geometry which is interferogram of converging spherical wavefront with mutually coherent planar wavefront. Proposed real time monitoring and actual fringe field analysis techniques allow complete characterizations of fringes formed at measurement volume and permit to evaluate beam quality, alignment and fringe uniformity with greater precision. After experimentally analyzing the fringes formed at measurement volume by all four imaging systems, it is found that fringes obtained using compact two hololens imaging systems get improved both qualitatively and quantitatively compared to that obtained using conventional imaging system. Results indicate qualitative improvement of non-uniformity in fringe thickness and micro intensity variations perpendicular to the fringes, and quantitative improvement of 39.25% in overall average normalized standard deviations of fringe width formed by compact two hololens imaging systems compare to that of conventional imaging system.

The influence of surface topography on the forming friction of automotive aluminum sheet

Energy Technology Data Exchange (ETDEWEB)

Kramer, Pamela Ann [Univ. of California, Berkeley, CA (United States). Dept. of Materials Science and Mineral Engineering

1998-05-01

Interest in utilizing aluminum alloys in automobiles has increased in recent years as a result of the desire to lower automobile weight and, consequently, increase fuel economy. While aluminum alloy use in cast parts has increased, outer body panel applications are still being investigated. The industry is interested in improving the formability of these sheet alloys by a combination of alloy design and processing. A different avenue of improving the formability of these alloys may be through patterning of the sheet surface. Surface patterns hold the lubricant during the forming process, with a resulting decrease in the sheet-die surface contact. While it has been speculated that an optimum surface pattern would consist of discrete cavities, detailed investigation into the reduction of forming friction by utilizing discrete patterns is lacking. A series of discrete patterns were investigated to determine the dependence of the forming friction of automotive aluminum alloys on pattern lubricant carrying capacity and on material strength. Automotive aluminum alloys used in outer body panel applications were rolled on experimental rolls that had been prepared with a variety of discrete patterns. All patterns for each alloy were characterized before and after testing both optically and, to determine pattern lubricant capacity, using three dimensional laser profilometry. A draw bead simulation (DBS) friction tester was designed and fabricated to determine the forming friction of the patterned sheets. Tensile testing and frictionless DBS testing were performed to ascertain the material properties of each sheet. The most striking result of this work was the inversely linear dependence of forming friction on the lubricant carrying capacity of the discrete patterns.

Classical reconstruction of interference patterns of position-wave-vector-entangled photon pairs by the time-reversal method

Science.gov (United States)

Ogawa, Kazuhisa; Kobayashi, Hirokazu; Tomita, Akihisa

2018-02-01

The quantum interference of entangled photons forms a key phenomenon underlying various quantum-optical technologies. It is known that the quantum interference patterns of entangled photon pairs can be reconstructed classically by the time-reversal method; however, the time-reversal method has been applied only to time-frequency-entangled two-photon systems in previous experiments. Here, we apply the time-reversal method to the position-wave-vector-entangled two-photon systems: the two-photon Young interferometer and the two-photon beam focusing system. We experimentally demonstrate that the time-reversed systems classically reconstruct the same interference patterns as the position-wave-vector-entangled two-photon systems.

Wave of chaos in a diffusive system: Generating realistic patterns of patchiness in plankton-fish dynamics

International Nuclear Information System (INIS)

Upadhyay, Ranjit Kumar; Kumari, Nitu; Rai, Vikas

2009-01-01

We show that wave of chaos (WOC) can generate two-dimensional time-independent spatial patterns which can be a potential candidate for understanding planktonic patchiness observed in marine environments. These spatio-temporal patterns were obtained in computer simulations of a minimal model of phytoplankton-zooplankton dynamics driven by forces of diffusion. We also attempt to figure out the average lifetimes of these non-linear non-equilibrium patterns. These spatial patterns serve as a realistic model for patchiness found in aquatic systems (e.g., marine and oceanic). Additionally, spatio-temporal chaos produced by bi-directional WOCs is robust to changes in key parameters of the system; e.g., intra-specific competition among individuals of phytoplankton and the rate of fish predation. The ideas contained in the present paper may find applications in diverse fields of human endeavor.

Laser-induced superhydrophobic grid patterns on PDMS for droplet arrays formation

Energy Technology Data Exchange (ETDEWEB)

Farshchian, Bahador [Ingram School of Engineering, Texas State University, San Marcos, TX 78666 (United States); Gatabi, Javad R. [Materials Science, Engineering and Commercialization, Texas State University, San Marcos, TX 78666 (United States); Bernick, Steven M.; Park, Sooyeon [Ingram School of Engineering, Texas State University, San Marcos, TX 78666 (United States); Lee, Gwan-Hyoung [Department of Materials Science and Engineering, Yonsei University, Seoul 03722 (Korea, Republic of); Droopad, Ravindranath [Ingram School of Engineering, Texas State University, San Marcos, TX 78666 (United States); Materials Science, Engineering and Commercialization, Texas State University, San Marcos, TX 78666 (United States); Kim, Namwon, E-mail: n_k43@txstate.edu [Ingram School of Engineering, Texas State University, San Marcos, TX 78666 (United States)

2017-02-28

Highlights: • Superhydrophobic grid patterns were processed on the surface of PDMS using a pulsed nanosecond laser. • Droplet arrays form instantly on the laser-patterned PDMS with the superhydrophobic grid pattern when the PDMS sample is simply immersed in and withdrawn from water. • Droplet size can be controlled by controlling the pitch size of superhydrophobic grid and the withdrawal speed. - Abstract: We demonstrate a facile single step laser treatment process to render a polydimethylsiloxane (PDMS) surface superhydrophobic. By synchronizing a pulsed nanosecond laser source with a motorized stage, superhydrophobic grid patterns were written on the surface of PDMS. Hierarchical micro and nanostructures were formed in the irradiated areas while non-irradiated areas were covered by nanostructures due to deposition of ablated particles. Arrays of droplets form spontaneously on the laser-patterned PDMS with superhydrophobic grid pattern when the PDMS sample is simply immersed in and withdrawn from water due to different wetting properties of the irradiated and non-irradiated areas. The effects of withdrawal speed and pitch size of superhydrophobic grid on the size of formed droplets were investigated experimentally. The droplet size increases initially with increasing the withdrawal speed and then does not change significantly beyond certain points. Moreover, larger droplets are formed by increasing the pitch size of the superhydrophobic grid. The droplet arrays formed on the laser-patterned PDMS with wettability contrast can be used potentially for patterning of particles, chemicals, and bio-molecules and also for cell screening applications.

Visualizing systems engineering data with Java

International Nuclear Information System (INIS)

Barter, R; Vinzant, A.

1998-01-01

Systems Engineers are required to deal with complex sets of data. To be useful, the data must be managed effectively, and presented in meaningful terms to a wide variety of information consumers. Two software patterns are presented as the basis for exploring the visualization of systems engineering data. The Model, View, Controller pattern defines an information management system architecture. The Entity, Relation, Attribute pattern defines the information model. MVC Views then form the basis for the user interface between the information consumer and the MVC Controller/Model combination. A Java tool set is described for exploring alternative views into the underlying complex data structures encountered in systems engineering

Cell patterning on poly(sodium 4-styrenesulfonate)-patterned fluoropolymer substrate

Energy Technology Data Exchange (ETDEWEB)

Kim, Wan-Joong [Advanced Radiation Technology Institute, Korea Atomic Energy Research Institute, Jeongeup-si, Jeollabuk-do 580-185 (Korea, Republic of); Department of Polymer Science and Engineering, Chungnam National University, Yuseong-gu, Daejeon 305-764 (Korea, Republic of); Jung, Chang-Hee; Hwang, In-Tae [Advanced Radiation Technology Institute, Korea Atomic Energy Research Institute, Jeongeup-si, Jeollabuk-do 580-185 (Korea, Republic of); Jung, Chan-Hee, E-mail: jch@kaeri.re.kr [Advanced Radiation Technology Institute, Korea Atomic Energy Research Institute, Jeongeup-si, Jeollabuk-do 580-185 (Korea, Republic of); Choi, Jae-Hak, E-mail: jaehakchoi@cnu.ac.kr [Advanced Radiation Technology Institute, Korea Atomic Energy Research Institute, Jeongeup-si, Jeollabuk-do 580-185 (Korea, Republic of); Department of Polymer Science and Engineering, Chungnam National University, Yuseong-gu, Daejeon 305-764 (Korea, Republic of); Hong, Sung-Kwon [Department of Polymer Science and Engineering, Chungnam National University, Yuseong-gu, Daejeon 305-764 (Korea, Republic of)

2013-10-15

Highlights: •PFA films were functionalized by ion-beam induced surface graft polymerization. •Poly(sodium 4-styrenesulfonate) (PSS)-patterned PFA films were prepared. •Well-organized cell patterns were obtained on PSS-patterned PFA films. •This method is useful to fabricate bio-platforms for cell-based biodevices. -- Abstract: The surface functionalization of bio-inert fluoropolymer films through ion beam-induced surface graft polymerization was investigated to control the cellular behavior. The surface of poly(tetrafluoroethylene-co-perfluoropropl vinyl ether) (PFA) films was selectively activated by 150 keV H{sup +} ion implantation in the presence of a pattern mask and sodium 4-styrenesulfonate (SS) was then graft polymerized onto the implanted PFA films to form hydrophilic poly(sodium 4-styrenesulfonate) (PSS)-patterned PFA films. The surface of the resulting PSS-patterned PFA films was investigated in terms of the degree of graft polymerization, chemical structure, chemical composition, wettability, and morphology. The analytical results revealed that PSS was selectively grafted onto the implanted regions of the PFA films. Furthermore, in vitro cell culture on the PSS-patterned PFA films exhibited a preferential adhesion and growth of cells onto the PSS-grafted regions, resulting in well-organized 100 μm cell patterns.

Cell patterning on poly(sodium 4-styrenesulfonate)-patterned fluoropolymer substrate

International Nuclear Information System (INIS)

Kim, Wan-Joong; Jung, Chang-Hee; Hwang, In-Tae; Jung, Chan-Hee; Choi, Jae-Hak; Hong, Sung-Kwon

2013-01-01

Highlights: •PFA films were functionalized by ion-beam induced surface graft polymerization. •Poly(sodium 4-styrenesulfonate) (PSS)-patterned PFA films were prepared. •Well-organized cell patterns were obtained on PSS-patterned PFA films. •This method is useful to fabricate bio-platforms for cell-based biodevices. -- Abstract: The surface functionalization of bio-inert fluoropolymer films through ion beam-induced surface graft polymerization was investigated to control the cellular behavior. The surface of poly(tetrafluoroethylene-co-perfluoropropl vinyl ether) (PFA) films was selectively activated by 150 keV H + ion implantation in the presence of a pattern mask and sodium 4-styrenesulfonate (SS) was then graft polymerized onto the implanted PFA films to form hydrophilic poly(sodium 4-styrenesulfonate) (PSS)-patterned PFA films. The surface of the resulting PSS-patterned PFA films was investigated in terms of the degree of graft polymerization, chemical structure, chemical composition, wettability, and morphology. The analytical results revealed that PSS was selectively grafted onto the implanted regions of the PFA films. Furthermore, in vitro cell culture on the PSS-patterned PFA films exhibited a preferential adhesion and growth of cells onto the PSS-grafted regions, resulting in well-organized 100 μm cell patterns

Children in Greenland: disease patterns and contacts to the health care system

Directory of Open Access Journals (Sweden)

Marius Kløvgaard

2016-12-01

Full Text Available Background: Previous studies of Greenlandic children’s disease pattern and contacts to the health care system are sparse and have focused on the primary health care sector. Objective: We aimed to identify the disease pattern and use of health care facilities of children aged 0–10 in two Greenlandic cohorts. Methods and design: In a retrospective, descriptive follow-up of the Ivaaq (The Greenland Child Cohort and the CLEAR (climate changes, environmental contaminants and reproductive health birth cohorts (total n=1,000, we reviewed medical records of children aged 6–10 in 2012 with residence in Nuuk or Ilulissat (n=332. Data on diseases and health care system contacts were extracted. Diagnoses were validated retrospectively. Primary health care contacts were reviewed for a random sample of 1:6. Results: In 311 children with valid social security number, the total number of health care system contacts was 12,471 equalling 4.6 contacts per child per year. The annual incidence rate of hospital admissions was 1:10 children (total n=266, 1,220 days, 4.6 days/admission, outpatient contacts 2:10 children and primary care 3.6 per child. Contacts were overall more frequent in boys compared with girls, 39.5 versus 34.6 during the study period, p=0.02. The highest annual contact rates for diseases were: hospitalisations/acute respiratory diseases 13.9:1,000; outpatient contacts/otitis media 5.1:1,000; primary care/conjunctivitis or nasopharyngitis 410:1,000 children. Outpatient screening for respiratory tuberculosis accounted 6.2:1,000, primary care non-disease (Z-diagnosis 2,081:1,000 annually. Complete adherence to the child vaccination programme was seen in 40%, while 5% did not receive any vaccinations. Conclusions: In this first study of its kind, the health care contact pattern in Greenlandic children showed a relatively high hospitalisation rate and duration per admission, and a low primary health care contact rate. The overall contact rate and

Development of an online morbidity, mortality, and near-miss reporting system to identify patterns of adverse events in surgical patients.

Science.gov (United States)

Bilimoria, Karl Y; Kmiecik, Thomas E; DaRosa, Debra A; Halverson, Amy; Eskandari, Mark K; Bell, Richard H; Soper, Nathaniel J; Wayne, Jeffrey D

2009-04-01

To design a Web-based system to track adverse and near-miss events, to establish an automated method to identify patterns of events, and to assess the adverse event reporting behavior of physicians. A Web-based system was designed to collect physician-reported adverse events including weekly Morbidity and Mortality (M&M) entries and anonymous adverse/near-miss events. An automated system was set up to help identify event patterns. Adverse event frequency was compared with hospital databases to assess reporting completeness. A metropolitan tertiary care center. Identification of adverse event patterns and completeness of reporting. From September 2005 to August 2007, 15,524 surgical patients were reported including 957 (6.2%) adverse events and 34 (0.2%) anonymous reports. The automated pattern recognition system helped identify 4 event patterns from M&M reports and 3 patterns from anonymous/near-miss reporting. After multidisciplinary meetings and expert reviews, the patterns were addressed with educational initiatives, correction of systems issues, and/or intensive quality monitoring. Only 25% of complications and 42% of inpatient deaths were reported. A total of 75.2% of adverse events resulting in permanent disability or death were attributed to the nature of the disease. Interventions to improve reporting were largely unsuccessful. We have developed a user-friendly Web-based system to track complications and identify patterns of adverse events. Underreporting of adverse events and attributing the complication to the nature of the disease represent a problem in reporting culture among surgeons at our institution. Similar systems should be used by surgery departments, particularly those affiliated with teaching hospitals, to identify quality improvement opportunities.

The impact of recreational MDMA 'ecstasy' use on global form processing.

Science.gov (United States)

White, Claire; Edwards, Mark; Brown, John; Bell, Jason

2014-11-01

The ability to integrate local orientation information into a global form percept was investigated in long-term ecstasy users. Evidence suggests that ecstasy disrupts the serotonin system, with the visual areas of the brain being particularly susceptible. Previous research has found altered orientation processing in the primary visual area (V1) of users, thought to be due to disrupted serotonin-mediated lateral inhibition. The current study aimed to investigate whether orientation deficits extend to higher visual areas involved in global form processing. Forty-five participants completed a psychophysical (Glass pattern) study allowing an investigation into the mechanisms underlying global form processing and sensitivity to changes in the offset of the stimuli (jitter). A subgroup of polydrug-ecstasy users (n=6) with high ecstasy use had significantly higher thresholds for the detection of Glass patterns than controls (n=21, p=0.039) after Bonferroni correction. There was also a significant interaction between jitter level and drug-group, with polydrug-ecstasy users showing reduced sensitivity to alterations in jitter level (p=0.003). These results extend previous research, suggesting disrupted global form processing and reduced sensitivity to orientation jitter with ecstasy use. Further research is needed to investigate this finding in a larger sample of heavy ecstasy users and to differentiate the effects of other drugs. © The Author(s) 2014.

Off-Line Testing of Tribo-Systems for Sheet Metal Forming Production

DEFF Research Database (Denmark)

Bay, Niels; Ceron, Ermanno

2014-01-01

Off-line testing of new tribo-systems for sheet metal forming production is an important issue, when new, environmentally benign lubricants are to be introduced. To obtain useful results it is, however, vital to ensure similar conditions as in the production process regarding the main tribo...... leading to very high tool/workpiece interface pressure and temperature in the second re-draw. Under such conditions only the best lubricant systems work satisfactory, and the paper shows how the performance of different tribo-systems in production may be predicted by off-line testing combined...

Localized States in Physics: Solitons and Patterns

CERN Document Server

Descalzi, Orazio; Residori, Stefania; Assanto, Gaetano

2011-01-01

Systems driven far from thermodynamic equilibrium can create dissipative structures through the spontaneous breaking of symmetries. A particularly fascinating feature of these pattern-forming systems is their tendency to produce spatially confined states. These localized wave packets can exist as propagating entities through space and/or time. Various examples of such systems will be dealt with in this book, including localized states in fluids, chemical reactions on surfaces, neural networks, optical systems, granular systems, population models, and Bose-Einstein condensates.This book should appeal to all physicists, mathematicians and electrical engineers interested in localization in far-from-equilibrium systems. The authors - all recognized experts in their fields - strive to achieve a balance between theoretical and experimental considerations thereby giving an overview of fascinating physical principles, their manifestations in diverse systems, and the novel technical applications on the horizon.

Interactions between motion and form processing in the human visual system.

Science.gov (United States)

Mather, George; Pavan, Andrea; Bellacosa Marotti, Rosilari; Campana, Gianluca; Casco, Clara

2013-01-01

The predominant view of motion and form processing in the human visual system assumes that these two attributes are handled by separate and independent modules. Motion processing involves filtering by direction-selective sensors, followed by integration to solve the aperture problem. Form processing involves filtering by orientation-selective and size-selective receptive fields, followed by integration to encode object shape. It has long been known that motion signals can influence form processing in the well-known Gestalt principle of common fate; texture elements which share a common motion property are grouped into a single contour or texture region. However, recent research in psychophysics and neuroscience indicates that the influence of form signals on motion processing is more extensive than previously thought. First, the salience and apparent direction of moving lines depends on how the local orientation and direction of motion combine to match the receptive field properties of motion-selective neurons. Second, orientation signals generated by "motion-streaks" influence motion processing; motion sensitivity, apparent direction and adaptation are affected by simultaneously present orientation signals. Third, form signals generated by human body shape influence biological motion processing, as revealed by studies using point-light motion stimuli. Thus, form-motion integration seems to occur at several different levels of cortical processing, from V1 to STS.

Patterns of reproductive isolation in a haplodiploid - strong post-mating, prezygotic barriers among three forms of a social spider mite.

Science.gov (United States)

Sato, Yukie; Sakamoto, Hironori; Gotoh, Tetsuo; Saito, Yutaka; Chao, Jung-Tai; Egas, Martijn; Mochizuki, Atsushi

2018-03-22

In speciation research, much attention is paid to the evolution of reproductive barriers, preventing diverging groups from hybridizing back into one gene pool. The prevalent view is that reproductive barriers evolve gradually as a by-product of genetic changes accumulated by natural selection and genetic drift in groups that are segregated spatially and/or temporally. Reproductive barriers, however, can also be reinforced by natural selection against maladaptive hybridization. These mutually compatible theories are both empirically supported by studies, analysing relationships between intensity of reproductive isolation and genetic distance in sympatric taxa and allopatric taxa. Here, we present the - to our knowledge - first comparative study in a haplodiploid organism, the social spider mite Stigmaeopsis miscanthi, by measuring premating and post-mating, pre- and post-zygotic components of reproductive isolation, using three recently diverged forms of the mite that partly overlap in home range. We carried out cross-experiments and measured genetic distances (mitochondrial DNA and nuclear DNA) among parapatric and allopatric populations of the three forms. Our results show that the three forms are reproductively isolated, despite the absence of premating barriers, and that the post-mating, prezygotic component contributes most to reproductive isolation. As expected, the strength of post-mating reproductive barriers positively correlated with genetic distance. We did not find a clear pattern of prezygotic barriers evolving faster in parapatry than in allopatry, although one form did show a trend in line with the ecological and behavioural relationships between the forms. Our study advocates the versatility of haplodiploid animals for investigating the evolution of reproductive barriers. © 2018 European Society For Evolutionary Biology. Journal of Evolutionary Biology © 2018 European Society For Evolutionary Biology.

Transition of spiral calcium waves between multiple stable patterns can be triggered by a single calcium spark in a fire-diffuse-fire model

Science.gov (United States)

Tang, Ai-Hui; Wang, Shi-Qiang

2009-01-01

Spiral patterns have been found in various nonequilibrium systems. The Ca2+-induced Ca2+ release system in single cardiac cells is unique for highly discrete reaction elements, each giving rise to a Ca2+ spark upon excitation. We imaged the spiral Ca2+ waves in isolated cardiac cells and numerically studied the effect of system excitability on spiral patterns using a two-dimensional fire-diffuse-fire model. We found that under certain conditions, the system was able to display multiple stable patterns of spiral waves, each exhibiting different periods and distinct routines of spiral tips. Transition between these different patterns could be triggered by an internal fluctuation in the form of a single Ca2+ spark. PMID:19792039

Transition of spiral calcium waves between multiple stable patterns can be triggered by a single calcium spark in a fire-diffuse-fire model.

Science.gov (United States)

Tang, Ai-Hui; Wang, Shi-Qiang

2009-09-01

Spiral patterns have been found in various nonequilibrium systems. The Ca(2+)-induced Ca(2+) release system in single cardiac cells is unique for highly discrete reaction elements, each giving rise to a Ca(2+) spark upon excitation. We imaged the spiral Ca(2+) waves in isolated cardiac cells and numerically studied the effect of system excitability on spiral patterns using a two-dimensional fire-diffuse-fire model. We found that under certain conditions, the system was able to display multiple stable patterns of spiral waves, each exhibiting different periods and distinct routines of spiral tips. Transition between these different patterns could be triggered by an internal fluctuation in the form of a single Ca(2+) spark.

Manipulation of Superparamagnetic Beads on Patterned Exchange-Bias Layer Systems for Biosensing Applications

Directory of Open Access Journals (Sweden)

Arno Ehresmann

2015-11-01

Full Text Available A technology platform based on a remotely controlled and stepwise transport of an array arrangement of superparamagnetic beads (SPB for efficient molecular uptake, delivery and accumulation in the context of highly specific and sensitive analyte molecule detection for the application in lab-on-a-chip devices is presented. The near-surface transport of SPBs is realized via the dynamic transformation of the SPBs’ magnetic potential energy landscape above a magnetically stripe patterned Exchange-Bias (EB thin film layer systems due to the application of sub-mT external magnetic field pulses. In this concept, the SPB velocity is dramatically influenced by the magnitude and gradient of the magnetic field landscape (MFL above the magnetically stripe patterned EB substrate, the SPB to substrate distance, the magnetic properties of both the SPBs and the EB layer system, respectively, as well as by the properties of the external magnetic field pulses and the surrounding fluid. The focus of this review is laid on the specific MFL design in EB layer systems via light-ion bombardment induced magnetic patterning (IBMP. A numerical approach is introduced for the theoretical description of the MFL in comparison to experimental characterization via scanning Hall probe microscopy. The SPB transport mechanism will be outlined in terms of the dynamic interplay between the EB substrate’s MFL and the pulse scheme of the external magnetic field.

Manipulation of Superparamagnetic Beads on Patterned Exchange-Bias Layer Systems for Biosensing Applications.

Science.gov (United States)

Ehresmann, Arno; Koch, Iris; Holzinger, Dennis

2015-11-13

A technology platform based on a remotely controlled and stepwise transport of an array arrangement of superparamagnetic beads (SPB) for efficient molecular uptake, delivery and accumulation in the context of highly specific and sensitive analyte molecule detection for the application in lab-on-a-chip devices is presented. The near-surface transport of SPBs is realized via the dynamic transformation of the SPBs' magnetic potential energy landscape above a magnetically stripe patterned Exchange-Bias (EB) thin film layer systems due to the application of sub-mT external magnetic field pulses. In this concept, the SPB velocity is dramatically influenced by the magnitude and gradient of the magnetic field landscape (MFL) above the magnetically stripe patterned EB substrate, the SPB to substrate distance, the magnetic properties of both the SPBs and the EB layer system, respectively, as well as by the properties of the external magnetic field pulses and the surrounding fluid. The focus of this review is laid on the specific MFL design in EB layer systems via light-ion bombardment induced magnetic patterning (IBMP). A numerical approach is introduced for the theoretical description of the MFL in comparison to experimental characterization via scanning Hall probe microscopy. The SPB transport mechanism will be outlined in terms of the dynamic interplay between the EB substrate's MFL and the pulse scheme of the external magnetic field.

Square and Rectangular Arrays from Directed Assembly of Sphere-forming Diblock Copolymers in Thin Films

Science.gov (United States)

Ji, Shengxiang; Nagpal, Umang; Liao, Wen; de Pablo, Juan; Nealey, Paul

2010-03-01

Patterns of square and rectangular arrays with nanoscale dimensions are scientifically and technologically important. Fabrication of square array patterns in thin films has been demonstrated by directed assembly of cylinder-forming diblock copolymers on chemically patterned substrates, supramolecular assembly of diblock copolymers, and self-assembly of triblock terpolymers. However, a macroscopic area of square array patterns with long-range order has not been achieved, and the fabrication of rectangular arrays has not been reported so far. Here we report a facile approach for fabricating patterns of square and rectangular arrays by directing the assembly of sphere-forming diblock copolymers on chemically patterned substrates. On stripe patterns, a square arrangement of half spheres, corresponding to the (100) plane of the body-centred cubic (BCC) lattice, formed on film surfaces. When the underlying pattern periods mismatched with the copolymer period, the square pattern could be stretched (up to ˜60%) or compressed (˜15%) to form rectangular arrays. Monte Carlo simulations have been further used to verify the experimental results and the 3-dimensional arrangements of spheres.

Traditional medicine as an alternative form of health care system: A ...

African Journals Online (AJOL)

Traditional medicine as an alternative form of health care system: A preliminary case study of Nangabo sub-county, central Uganda. ... African Journal of Traditional, Complementary and Alternative Medicines ... The findings indicated that most (43%) respondents derive their livelihoods from traditional medicine practices.

Work Organisation, Forms of Employee Learning and National Systems of Education and Training

Science.gov (United States)

Lorenz, Edward; Lundvall, Bengt-Åke; Kraemer-Mbula, Erika; Rasmussen, Palle

2016-01-01

This article uses a multi-level framework to investigate for 17 European nations the links between forms of work organisation and style of employee learning at the workplace on the one hand, and the characteristics of national educational and training systems on the other. The analysis shows that forms of work organisation characterised by…

Modelling biomechanics of bark patterning in grasstrees.

Science.gov (United States)

Dale, Holly; Runions, Adam; Hobill, David; Prusinkiewicz, Przemyslaw

2014-09-01

Bark patterns are a visually important characteristic of trees, typically attributed to fractures occurring during secondary growth of the trunk and branches. An understanding of bark pattern formation has been hampered by insufficient information regarding the biomechanical properties of bark and the corresponding difficulties in faithfully modelling bark fractures using continuum mechanics. This study focuses on the genus Xanthorrhoea (grasstrees), which have an unusual bark-like structure composed of distinct leaf bases connected by sticky resin. Due to its discrete character, this structure is well suited for computational studies. A dynamic computational model of grasstree development was created. The model captures both the phyllotactic pattern of leaf bases during primary growth and the changes in the trunk's width during secondary growth. A biomechanical representation based on a system of masses connected by springs is used for the surface of the trunk, permitting the emergence of fractures during secondary growth to be simulated. The resulting fracture patterns were analysed statistically and compared with images of real trees. The model reproduces key features of grasstree bark patterns, including their variability, spanning elongated and reticulate forms. The patterns produced by the model have the same statistical character as those seen in real trees. The model was able to support the general hypothesis that the patterns observed in the grasstree bark-like layer may be explained in terms of mechanical fractures driven by secondary growth. Although the generality of the results is limited by the unusual structure of grasstree bark, it supports the hypothesis that bark pattern formation is primarily a biomechanical phenomenon.

On the control and prediction of the heating patterns of the annular phased array hyperthermia system

International Nuclear Information System (INIS)

Iskander, M.F.; Turner, P.F.; Knight, G.

1984-01-01

In previous publications the authors examined the electromagnetic (EM) power deposition and heating of the Annular Phased Array (APA) system developed by BSD Medical Corporation, using numerical EM and thermodynamics modeling. In this paper the results of recent efforts to vary and control the heating patterns produced by this system are described. in particular, data from several numerical simulations and experimental measurements are presented which illustrate the effect on the heating patterns achieved by varying the phase difference between the different ports of the APA system. Other heating patterns, produced by inactivating some of the APA ports, are also discussed. The remainder of the paper focuses on the feasibility of predicting the EM power depositions patterns of the APA solely through monitoring the E-field in the water bolus around the patient's body. In particular, it is shown that this E-field distribution depends primarily upon the outer geometry of the human body and is largely insensitive to the detailed distribution of inner tissues. Specific suggestions regarding the types, number, and location of E-field probes that can be used for such measurements are also given

Client-Oriented Approach: Forming the System of Management of the Bank Relations with Clients

OpenAIRE

Zavadska Diana V.

2015-01-01

The aim of the article is to develop the theoretical principles of forming the bank relations with clients as part of the client-oriented strategy implementation. As a result of the conducted research there has been presented the definition of client-orientation, mechanism and system of management. The system of management of the bank relations with clients, the purpose and objectives of its formation have been substantiated. The hierarchy of subjects of forming and managing the process...

Pattern formation in diffusive excitable systems under magnetic flow effects

Science.gov (United States)

Mvogo, Alain; Takembo, Clovis N.; Ekobena Fouda, H. P.; Kofané, Timoléon C.

2017-07-01

We study the spatiotemporal formation of patterns in a diffusive FitzHugh-Nagumo network where the effect of electromagnetic induction has been introduced in the standard mathematical model by using magnetic flux, and the modulation of magnetic flux on membrane potential is realized by using memristor coupling. We use the multi-scale expansion to show that the system equations can be reduced to a single differential-difference nonlinear equation. The linear stability analysis is performed and discussed with emphasis on the impact of magnetic flux. It is observed that the effect of memristor coupling importantly modifies the features of modulational instability. Our analytical results are supported by the numerical experiments, which reveal that the improved model can lead to nonlinear quasi-periodic spatiotemporal patterns with some features of synchronization. It is observed also the generation of pulses and rhythmics behaviors like breathing or swimming which are important in brain researches.

Operation of radiation monitoring system in radwaste form test facility

International Nuclear Information System (INIS)

Ryu, Young Gerl; Kim, Ki Hong; Lee, Jae Won; Kwac, Koung Kil

1998-08-01

RWFTF (RadWaste Form Test Facility) must have a secure radiation monitoring system (RMS) because of having a hot-cell capable of handling high radioactive materials. And then in controlled radiation zone, which is hot-cell and its maintenance and operation / control room, area dose rate, radioactivities in air-bone particulates and stack, and surface contamination are monitored continuously. For the effective management such as higher utilization, maintenance and repair, the status of this radiation monitoring system, the operation and characteristics of all kinds of detectors and other parts of composing this system, and signal treatment and its evaluation were described in this technical report. And to obtain the accuracy detection results and its higher confidence level, the procedure such as maintenance, functional check and system calibration were established and appended to help the operation of RMS. (author). 6 tabs., 30 figs

Fast and slow crystal growth kinetics in glass-forming melts

Energy Technology Data Exchange (ETDEWEB)

Orava, J.; Greer, A. L., E-mail: alg13@cam.ac.uk [WPI-Advanced Institute for Materials Research (WPI-AIMR), Tohoku University, 2-1-1 Katahira, Aoba-ku, Sendai 980-8577, Japan and Department of Materials Science and Metallurgy, 27 Charles Babbage Road, University of Cambridge, Cambridge CB3 0FS (United Kingdom)

2014-06-07

Published values of crystal growth rates are compared for supercooled glass-forming liquids undergoing congruent freezing at a planar crystal-liquid interface. For the purposes of comparison pure metals are considered to be glass-forming systems, using data from molecular-dynamics simulations. For each system, the growth rate has a maximum value U{sub max} at a temperature T{sub max} that lies between the glass-transition temperature T{sub g} and the melting temperature T{sub m}. A classification is suggested, based on the lability (specifically, the propensity for fast crystallization), of the liquid. High-lability systems show “fast” growth characterized by a high U{sub max}, a low T{sub max} / T{sub m}, and a very broad peak in U vs. T / T{sub m}. In contrast, systems showing “slow” growth have a low U{sub max}, a high T{sub max} / T{sub m}, and a sharp peak in U vs. T / T{sub m}. Despite the difference of more than 11 orders of magnitude in U{sub max} seen in pure metals and in silica, the range of glass-forming systems surveyed fit into a common pattern in which the lability increases with lower reduced glass-transition temperature (T{sub g} / T{sub m}) and higher fragility of the liquid. A single parameter, a linear combination of T{sub g} / T{sub m} and fragility, can show a good correlation with U{sub max}. For all the systems, growth at U{sub max} is coupled to the atomic/molecular mobility in the liquid. It is found that, across the diversity of glass-forming systems, T{sub max} / T{sub g} = 1.48 ± 0.15.

Efficient discovery of risk patterns in medical data.

Science.gov (United States)

Li, Jiuyong; Fu, Ada Wai-chee; Fahey, Paul

2009-01-01

This paper studies a problem of efficiently discovering risk patterns in medical data. Risk patterns are defined by a statistical metric, relative risk, which has been widely used in epidemiological research. To avoid fruitless search in the complete exploration of risk patterns, we define optimal risk pattern set to exclude superfluous patterns, i.e. complicated patterns with lower relative risk than their corresponding simpler form patterns. We prove that mining optimal risk pattern sets conforms an anti-monotone property that supports an efficient mining algorithm. We propose an efficient algorithm for mining optimal risk pattern sets based on this property. We also propose a hierarchical structure to present discovered patterns for the easy perusal by domain experts. The proposed approach is compared with two well-known rule discovery methods, decision tree and association rule mining approaches on benchmark data sets and applied to a real world application. The proposed method discovers more and better quality risk patterns than a decision tree approach. The decision tree method is not designed for such applications and is inadequate for pattern exploring. The proposed method does not discover a large number of uninteresting superfluous patterns as an association mining approach does. The proposed method is more efficient than an association rule mining method. A real world case study shows that the method reveals some interesting risk patterns to medical practitioners. The proposed method is an efficient approach to explore risk patterns. It quickly identifies cohorts of patients that are vulnerable to a risk outcome from a large data set. The proposed method is useful for exploratory study on large medical data to generate and refine hypotheses. The method is also useful for designing medical surveillance systems.

Viscoelasticity and pattern formations in stock market indices

Science.gov (United States)

Gündüz, Güngör; Gündüz, Aydın

2017-06-01

The viscoelastic and thermodynamic properties of four stock indices, namely, DJI, Nasdaq-100, Nasdaq-Composite, and S&P were analyzed for a period of 30 years from 1986 to 2015. The asset values (or index) can be placed into Aristotelian `potentiality-actuality' framework by using scattering diagram. Thus, the index values can be transformed into vectorial forms in a scattering diagram, and each vector can be split into its horizontal and vertical components. According to viscoelastic theory, the horizontal component represents the conservative, and the vertical component represents the dissipative behavior. The related storage and the loss modulus of these components are determined and then work-like and heat-like terms are calculated. It is found that the change of storage and loss modulus with Wiener noise (W) exhibit interesting patterns. The loss modulus shows a featherlike pattern, whereas the storage modulus shows figurative man-like pattern. These patterns are formed due to branchings in the system and imply that stock indices do have a kind of `fine-order' which can be detected when the change of modulus values are plotted with respect to Wiener noise. In theoretical calculations it is shown that the tips of the featherlike patterns stay at negative W values, but get closer to W = 0 as the drift in the system increases. The shift of the tip point from W = 0 indicates that the price change involves higher number of positive Wiener number corrections than the negative Wiener. The work-like and heat-like terms also exhibit patterns but with different appearance than modulus patterns. The decisional changes of people are reflected as the arrows in the scattering diagram and the propagation path of these vectors resemble the path of crack propagation. The distribution of the angle between two subsequent vectors shows a peak at 90°, indicating that the path mostly obeys the crack path occurring in hard objects. Entropy mimics the Wiener noise in the evolution

Fuzzy logic of Aristotelian forms

Energy Technology Data Exchange (ETDEWEB)

Perlovsky, L.I. [Nichols Research Corp., Lexington, MA (United States)

1996-12-31

Model-based approaches to pattern recognition and machine vision have been proposed to overcome the exorbitant training requirements of earlier computational paradigms. However, uncertainties in data were found to lead to a combinatorial explosion of the computational complexity. This issue is related here to the roles of a priori knowledge vs. adaptive learning. What is the a-priori knowledge representation that supports learning? I introduce Modeling Field Theory (MFT), a model-based neural network whose adaptive learning is based on a priori models. These models combine deterministic, fuzzy, and statistical aspects to account for a priori knowledge, its fuzzy nature, and data uncertainties. In the process of learning, a priori fuzzy concepts converge to crisp or probabilistic concepts. The MFT is a convergent dynamical system of only linear computational complexity. Fuzzy logic turns out to be essential for reducing the combinatorial complexity to linear one. I will discuss the relationship of the new computational paradigm to two theories due to Aristotle: theory of Forms and logic. While theory of Forms argued that the mind cannot be based on ready-made a priori concepts, Aristotelian logic operated with just such concepts. I discuss an interpretation of MFT suggesting that its fuzzy logic, combining a-priority and adaptivity, implements Aristotelian theory of Forms (theory of mind). Thus, 2300 years after Aristotle, a logic is developed suitable for his theory of mind.

New pattern recognition system in the e-nose for Chinese spirit identification

International Nuclear Information System (INIS)

Zeng Hui; Li Qiang; Gu Yu

2016-01-01

This paper presents a new pattern recognition system for Chinese spirit identification by using the polymer quartz piezoelectric crystal sensor based e-nose. The sensors are designed based on quartz crystal microbalance (QCM) principle, and they could capture different vibration frequency signal values for Chinese spirit identification. For each sensor in an 8-channel sensor array, seven characteristic values of the original vibration frequency signal values, i.e., average value (A), root-mean-square value (RMS), shape factor value (S f ), crest factor value (C f ), impulse factor value (I f ), clearance factor value (CL f ), kurtosis factor value (K v ) are first extracted. Then the dimension of the characteristic values is reduced by the principle components analysis (PCA) method. Finally the back propagation (BP) neutral network algorithm is used to recognize Chinese spirits. The experimental results show that the recognition rate of six kinds of Chinese spirits is 93.33% and our proposed new pattern recognition system can identify Chinese spirits effectively. (paper)

A Closed-Form Technique for the Reliability and Risk Assessment of Wind Turbine Systems

Directory of Open Access Journals (Sweden)

Leonardo Dueñas-Osorio

2012-06-01

Full Text Available This paper proposes a closed-form method to evaluate wind turbine system reliability and associated failure consequences. Monte Carlo simulation, a widely used approach for system reliability assessment, usually requires large numbers of computational experiments, while existing analytical methods are limited to simple system event configurations with a focus on average values of reliability metrics. By analyzing a wind turbine system and its components in a combinatorial yet computationally efficient form, the proposed approach provides an entire probability distribution of system failure that contains all possible configurations of component failure and survival events. The approach is also capable of handling unique component attributes such as downtime and repair cost needed for risk estimations, and enables sensitivity analysis for quantifying the criticality of individual components to wind turbine system reliability. Applications of the technique are illustrated by assessing the reliability of a 12-subassembly turbine system. In addition, component downtimes and repair costs of components are embedded in the formulation to compute expected annual wind turbine unavailability and repair cost probabilities, and component importance metrics useful for maintenance planning and research prioritization. Furthermore, this paper introduces a recursive solution to closed-form method and applies this to a 45-component turbine system. The proposed approach proves to be computationally efficient and yields vital reliability information that could be readily used by wind farm stakeholders for decision making and risk management.

Investigation of R-Factor for steel moment frame combined with cold-formed steel structures under different load patterns using pushover analysis

Directory of Open Access Journals (Sweden)

Siavash Sadeghi

2017-08-01

Full Text Available The use of Lightweight Steel Frames (LSF has grown considerably in recent years all over the world due to its unique advantages such as being cost-effective and light-weight, easy and quick installment. Another application is to use them in order to increase the number of new floors on the existing buildings. But since the behavior of the combined structure is not clear, there is no possibility of increasing new floors with Lightweight Steel Frames. Therefore, through selecting and modeling three buildings of three, five and seven floors with steel moment frames in SAP2000 software and adding one or two new floors using Lightweight Steel Frames (LSF and conducting a non-linear static analysis with three different lateral load pattern, we dealt with the seismic behavior and determined the behavior coefficient of each of the combined structures. The results indicated that the use of cold-formed structures in order to add story do not have a significant impact on R-factor. In addition, R-factor depends on the type of the side loading pattern.

Specific and Complete Local Integration of Patterns in Bayesian Networks

Directory of Open Access Journals (Sweden)

Martin Biehl

2017-05-01

Full Text Available We present a first formal analysis of specific and complete local integration. Complete local integration was previously proposed as a criterion for detecting entities or wholes in distributed dynamical systems. Such entities in turn were conceived to form the basis of a theory of emergence of agents within dynamical systems. Here, we give a more thorough account of the underlying formal measures. The main contribution is the disintegration theorem which reveals a special role of completely locally integrated patterns (what we call ι-entities within the trajectories they occur in. Apart from proving this theorem we introduce the disintegration hierarchy and its refinement-free version as a way to structure the patterns in a trajectory. Furthermore, we construct the least upper bound and provide a candidate for the greatest lower bound of specific local integration. Finally, we calculate the ι -entities in small example systems as a first sanity check and find that ι -entities largely fulfil simple expectations.

Giro form reading machine

Science.gov (United States)

Minh Ha, Thien; Niggeler, Dieter; Bunke, Horst; Clarinval, Jose

1995-08-01

Although giro forms are used by many people in daily life for money remittance in Switzerland, the processing of these forms at banks and post offices is only partly automated. We describe an ongoing project for building an automatic system that is able to recognize various items printed or written on a giro form. The system comprises three main components, namely, an automatic form feeder, a camera system, and a computer. These components are connected in such a way that the system is able to process a bunch of forms without any human interactions. We present two real applications of our system in the field of payment services, which require the reading of both machine printed and handwritten information that may appear on a giro form. One particular feature of giro forms is their flexible layout, i.e., information items are located differently from one form to another, thus requiring an additional analysis step to localize them before recognition. A commercial optical character recognition software package is used for recognition of machine-printed information, whereas handwritten information is read by our own algorithms, the details of which are presented. The system is implemented by using a client/server architecture providing a high degree of flexibility to change. Preliminary results are reported supporting our claim that the system is usable in practice.

Learning Spatiotemporally Encoded Pattern Transformations in Structured Spiking Neural Networks.

Science.gov (United States)

Gardner, Brian; Sporea, Ioana; Grüning, André

2015-12-01

Information encoding in the nervous system is supported through the precise spike timings of neurons; however, an understanding of the underlying processes by which such representations are formed in the first place remains an open question. Here we examine how multilayered networks of spiking neurons can learn to encode for input patterns using a fully temporal coding scheme. To this end, we introduce a new supervised learning rule, MultilayerSpiker, that can train spiking networks containing hidden layer neurons to perform transformations between spatiotemporal input and output spike patterns. The performance of the proposed learning rule is demonstrated in terms of the number of pattern mappings it can learn, the complexity of network structures it can be used on, and its classification accuracy when using multispike-based encodings. In particular, the learning rule displays robustness against input noise and can generalize well on an example data set. Our approach contributes to both a systematic understanding of how computations might take place in the nervous system and a learning rule that displays strong technical capability.

Interactions between motion and form processing in the human visual system

Directory of Open Access Journals (Sweden)

George eMather

2013-05-01

Full Text Available The predominant view of motion and form processing in the human visual system assumes that these two attributes are handled by separate and independent modules. Motion processing involves filtering by direction-selective sensors, followed by integration to solve the aperture problem. Form processing involves filtering by orientation-selective and size-selective receptive fields, followed by integration to encode object shape. It has long been known that motion signals can influence form processing in the well-known Gestalt principle of common fate; texture elements which share a common motion property are grouped into a single contour or texture region. However recent research in psychophysics and neuroscience indicates that the influence of form signals on motion processing is more extensive than previously thought. First, the salience and apparent direction of moving lines depends on how the local orientation and direction of motion combine to match the receptive field properties of motion-selective neurons. Second, orientation signals generated by ‘motion-streaks’ influence motion processing; motion sensitivity, apparent direction and adaptation are affected by simultaneously present orientation signals. Third, form signals generated by human body shape influence biological motion processing, as revealed by studies using point-light motion stimuli. Thus form-motion integration seems to occur at several different levels of cortical processing, from V1 to STS.

Phenomenological description of internal friction spectra in glass-forming and glassy systems

International Nuclear Information System (INIS)

Lomovskij, V.A.

1999-01-01

Dissipative events in different by chemical nature glass-forming systems, including B 2 O 3 , are studied. It is established from the spectra of internal friction of these systems that the maxima of the energy dissipation of the external power impact are positioned both in the area of viscous flow metastable structural liquid state and in the area of solid elastic state

Development of a BWR loading pattern design system based on modified genetic algorithms and knowledge

International Nuclear Information System (INIS)

Martin-del-Campo, Cecilia; Francois, Juan Luis; Avendano, Linda; Gonzalez, Mario

2004-01-01

An optimization system based on Genetic Algorithms (GAs), in combination with expert knowledge coded in heuristics rules, was developed for the design of optimized boiling water reactor (BWR) fuel loading patterns. The system was coded in a computer program named Loading Pattern Optimization System based on Genetic Algorithms, in which the optimization code uses GAs to select candidate solutions, and the core simulator code CM-PRESTO to evaluate them. A multi-objective function was built to maximize the cycle energy length while satisfying power and reactivity constraints used as BWR design parameters. Heuristic rules were applied to satisfy standard fuel management recommendations as the Control Cell Core and Low Leakage loading strategies, and octant symmetry. To test the system performance, an optimized cycle was designed and compared against an actual operating cycle of Laguna Verde Nuclear Power Plant, Unit I

Enabling active and healthy ageing decision support systems with the smart collection of TV usage patterns.

Science.gov (United States)

Billis, Antonis S; Batziakas, Asterios; Bratsas, Charalampos; Tsatali, Marianna S; Karagianni, Maria; Bamidis, Panagiotis D

2016-03-01

Smart monitoring of seniors behavioural patterns and more specifically activities of daily living have attracted immense research interest in recent years. Development of smart decision support systems to support the promotion of health smart homes has also emerged taking advantage of the plethora of smart, inexpensive and unobtrusive monitoring sensors, devices and software tools. To this end, a smart monitoring system has been used in order to extract meaningful information about television (TV) usage patterns and subsequently associate them with clinical findings of experts. The smart TV operating state remote monitoring system was installed in four elderly women homes and gathered data for more than 11 months. Results suggest that TV daily usage (time the TV is turned on) can predict mental health change. Conclusively, the authors suggest that collection of smart device usage patterns could strengthen the inference capabilities of existing health DSSs applied in uncontrolled settings such as real senior homes.

Dichotomous-noise-induced pattern formation in a reaction-diffusion system

Science.gov (United States)

Das, Debojyoti; Ray, Deb Shankar

2013-06-01

We consider a generic reaction-diffusion system in which one of the parameters is subjected to dichotomous noise by controlling the flow of one of the reacting species in a continuous-flow-stirred-tank reactor (CSTR) -membrane reactor. The linear stability analysis in an extended phase space is carried out by invoking Furutzu-Novikov procedure for exponentially correlated multiplicative noise to derive the instability condition in the plane of the noise parameters (correlation time and strength of the noise). We demonstrate that depending on the correlation time an optimal strength of noise governs the self-organization. Our theoretical analysis is corroborated by numerical simulations on pattern formation in a chlorine-dioxide-iodine-malonic acid reaction-diffusion system.

A Malicious Pattern Detection Engine for Embedded Security Systems in the Internet of Things

Directory of Open Access Journals (Sweden)

Doohwan Oh

2014-12-01

Full Text Available With the emergence of the Internet of Things (IoT, a large number of physical objects in daily life have been aggressively connected to the Internet. As the number of objects connected to networks increases, the security systems face a critical challenge due to the global connectivity and accessibility of the IoT. However, it is difficult to adapt traditional security systems to the objects in the IoT, because of their limited computing power and memory size. In light of this, we present a lightweight security system that uses a novel malicious pattern-matching engine. We limit the memory usage of the proposed system in order to make it work on resource-constrained devices. To mitigate performance degradation due to limitations of computation power and memory, we propose two novel techniques, auxiliary shifting and early decision. Through both techniques, we can efficiently reduce the number of matching operations on resource-constrained systems. Experiments and performance analyses show that our proposed system achieves a maximum speedup of 2.14 with an IoT object and provides scalable performance for a large number of patterns.

A Malicious Pattern Detection Engine for Embedded Security Systems in the Internet of Things

Science.gov (United States)

Oh, Doohwan; Kim, Deokho; Ro, Won Woo

2014-01-01

With the emergence of the Internet of Things (IoT), a large number of physical objects in daily life have been aggressively connected to the Internet. As the number of objects connected to networks increases, the security systems face a critical challenge due to the global connectivity and accessibility of the IoT. However, it is difficult to adapt traditional security systems to the objects in the IoT, because of their limited computing power and memory size. In light of this, we present a lightweight security system that uses a novel malicious pattern-matching engine. We limit the memory usage of the proposed system in order to make it work on resource-constrained devices. To mitigate performance degradation due to limitations of computation power and memory, we propose two novel techniques, auxiliary shifting and early decision. Through both techniques, we can efficiently reduce the number of matching operations on resource-constrained systems. Experiments and performance analyses show that our proposed system achieves a maximum speedup of 2.14 with an IoT object and provides scalable performance for a large number of patterns. PMID:25521382

A malicious pattern detection engine for embedded security systems in the Internet of Things.

Science.gov (United States)

Oh, Doohwan; Kim, Deokho; Ro, Won Woo

2014-12-16

With the emergence of the Internet of Things (IoT), a large number of physical objects in daily life have been aggressively connected to the Internet. As the number of objects connected to networks increases, the security systems face a critical challenge due to the global connectivity and accessibility of the IoT. However, it is difficult to adapt traditional security systems to the objects in the IoT, because of their limited computing power and memory size. In light of this, we present a lightweight security system that uses a novel malicious pattern-matching engine. We limit the memory usage of the proposed system in order to make it work on resource-constrained devices. To mitigate performance degradation due to limitations of computation power and memory, we propose two novel techniques, auxiliary shifting and early decision. Through both techniques, we can efficiently reduce the number of matching operations on resource-constrained systems. Experiments and performance analyses show that our proposed system achieves a maximum speedup of 2.14 with an IoT object and provides scalable performance for a large number of patterns.

On the use and computation of the Jordan canonical form in system theory

Science.gov (United States)

Sridhar, B.; Jordan, D.

1974-01-01

This paper investigates various aspects of the application of the Jordan canonical form of a matrix in system theory and develops a computational approach to determining the Jordan form for a given matrix. Applications include pole placement, controllability and observability studies, serving as an intermediate step in yielding other canonical forms, and theorem proving. The computational method developed in this paper is both simple and efficient. The method is based on the definition of a generalized eigenvector and a natural extension of Gauss elimination techniques. Examples are included for demonstration purposes.

NSLS-II filling pattern measurement

International Nuclear Information System (INIS)

Yong Hu; Dalesio, L.B.; Kiman Ha; Pinayev, I.

2012-01-01

Multi-bunch injection will be deployed at NSLS-II. High bandwidth diagnostic beam monitors with high speed digitizers are used to measure bunch-by-bunch charge variation. In order to minimize intensity-correlated orbit oscillations due to uneven bunch patterns, we need to measure the filling pattern (also named bunch pattern or bunch structure). This paper focuses on filling pattern measurements: how to measure bunch structure and make this information available in EPICS-based control system. This measurement requires combination of 3 types of beam monitors (Wall Current Monitor, Fast Current Transformer and Beam Position Monitor), data acquisition and controls (fast digitizer, EPICS software, etc.) and Event Timing system. High-bandwidth filling pattern monitor requires high-speed digitizer to sample its analog output signal. The evaluation results of commercial fast digitizer Agilent Acqiris and high bandwidth detector Bergoz FCT are presented. We have also tested the algorithm software for filling pattern measurement as well as the interface to event timing system. It appears that filling pattern measurement system is well understood and the tests for control hardware and software have given good results

Oscillation-Driven Spike-Timing Dependent Plasticity Allows Multiple Overlapping Pattern Recognition in Inhibitory Interneuron Networks

DEFF Research Database (Denmark)

Garrido, Jesús A.; Luque, Niceto R.; Tolu, Silvia

2016-01-01

The majority of operations carried out by the brain require learning complex signal patterns for future recognition, retrieval and reuse. Although learning is thought to depend on multiple forms of long-term synaptic plasticity, the way this latter contributes to pattern recognition is still poorly...... and at the inhibitory interneuron-interneuron synapses, the interneurons rapidly learned complex input patterns. Interestingly, induction of plasticity required that the network be entrained into theta-frequency band oscillations, setting the internal phase-reference required to drive STDP. Inhibitory plasticity...... effectively distributed multiple patterns among available interneurons, thus allowing the simultaneous detection of multiple overlapping patterns. The addition of plasticity in intrinsic excitability made the system more robust allowing self-adjustment and rescaling in response to a broad range of input...

Effect of mesoscopic fluctuations on equation of state in cluster-forming systems

Directory of Open Access Journals (Sweden)

A. Ciach

2012-06-01

Full Text Available Equation of state for systems with particles self-assembling into aggregates is derived within a mesoscopic theory combining density functional and field-theoretic approaches. We focus on the effect of mesoscopic fluctuations in the disordered phase. The pressure - volume fraction isotherms are calculated explicitly for two forms of the short-range attraction long-range repulsion potential. Mesoscopic fluctuations lead to an increased pressure in each case, except for very small volume fractions. When large clusters are formed, the mechanical instability of the system is present at much higher temperature than found in mean-field approximation. In this case phase separation competes with the formation of periodic phases (colloidal crystals. In the case of small clusters, no mechanical instability associated with separation into dilute and dense phases appears.

Cross-slope Movement Patterns in Landslides

Science.gov (United States)

Petley, D.; Murphy, W.; Bulmer, M. H.; Keefer, D.

2002-12-01

There is growing evidence that there is a significant element of cross-slope movement in many large landslide systems. These movements may result in changing states of stress between landslide blocks that can establish complex displacement patterns. Such motions, which are not considered in traditional two-dimensional limit-equilibrium analyses, are important in the investigation of a variety of landslide types, such as those triggered by earthquakes. In addition, these movements may introduce considerable errors into the interpretation of strain patterns as derived from InSAR studies. Finally, even traditional interpretation techniques may lead to the amount of total displacement being underestimated. These observations suggest that a three dimensional form of analysis may be more appropriate for large landslide complexes. The significance of such cross-slope movements are being investigated using a detailed investigation of the Lishan landslide complex in Central Taiwan. This landslide system, which was reactivated in 1990 related to the construction of a hotel. The total recorded movements have been approximately 1.5 m over an area of sliding that is estimated to be 450 m wide and 200 m long. Extensive damage has been caused to roads and buildings within the town. Remediation work has resulted largely in the stabilization of the landslide complex. Detailed geomorphological mapping has revealed that the landslide complex is composed of two main components. The first, immediately upslope of the hotel construction site, is a relatively shallow earthflow. The second, which has formed a large headscarp upslope from the main road in the centre of the town, is a deeper translational slide. Both appear to have been reactivations of previous failures. While the displacement patterns of the earthflow indicate a relatively simple downslope movement, the vectors derived from kinematic analysis of surface features have indicated that the movement of the deeper

Loading pattern calculated by inverse optimization vs traditional dosimetry systems of intracavitary brachytherapy of cervical cancer: a dosimetric study

International Nuclear Information System (INIS)

Jamema, S.V.; Deshpande, D.D.; Kirisits, C.; Trnkova, P.; Poetter, R.; Mahantshetty, U.; Shrivastava, S.K.; Dinshaw, K.A.

2008-01-01

In the recent past, inverse planning algorithms were introduced for intracavitary brachytherapy planning (ICBT) for cervical cancer. The loading pattern of these algorithms in comparison with traditional systems may not be similar. The purpose of this study was to objectively compare the loading patterns of traditional systems with the inverse optimization. Based on the outcome of the comparison, an attempt was made to obtain a loading pattern that takes into account the experience made with the inverse optimization

Patterns of exchange of forensic DNA data in the European Union through the Pr?m system

OpenAIRE

Santos, Filipe; Machado, Helena

2017-01-01

Article in press This paper presents a study of the 5-year operation (2011–2015) of the transnational exchange of forensic DNA data between Member States of the European Union (EU) for the purpose of combating cross-border crime and terrorism within the so-called Prüm system. This first systematisation of the full official statistical dataset provides an overall assessment of the match figures and patterns of operation of the Prüm system for DNA exchange. These figures and patterns are ana...