WorldWideScience

Sample records for passenger transport technology

  1. APPLICATION OF NFC TECHNOLOGY IN PASSENGER RAIL TRANSPORT

    Directory of Open Access Journals (Sweden)

    Henryk KOMSTA

    2016-09-01

    Full Text Available The article discusses the possibility of the application of the NFC technology as a system of selling tickets in passenger rail transport. The NFC (Near Field Communication technology is a wireless and contactless technology of transmission of radio data over short distances (max. 5 cm. This technology is very similar to the RFID (Radio Frequency Identification technology. It is assumed that this technology will spread rapidly and that already in 2015 around 85% of the payments in the EU will be made via mobile phones. This paper presents a research of passenger interest in this method of payment for tickets in the passenger rail transport in Slovakia. Further, an analysis of the applications of the NFC technology as a system of selling tickets in passenger rail transport, including the protection of data in mobile phones, the processes in case of losing a mobile phone and ensuring the communication between both parties was presented in the article. The last part of this analysis shows the possibility of purchasing tickets regardless of the carrier and the transport type.

  2. CAD/CAE-technologies application for assessment of passenger safety on railway transport in emergency

    Science.gov (United States)

    Antipin, D. Ya; Shorokhov, S. G.; Bondarenko, O. I.

    2018-03-01

    A possibility of using current software products realizing CAD/CAE-technologies for the assessment of passenger safety in emergency cases on railway transport has been analyzed. On the basis of the developed solid computer model of an anthropometric dummy, the authors carried out an analysis of possible levels of passenger injury during accident collision of a train with an obstacle.

  3. Technology of Urban, Interurban and Rural Passenger Transport

    Directory of Open Access Journals (Sweden)

    Gordana Štefančić

    2006-01-01

    Full Text Available The work will consider the significance of various publictransport modes, since different methods of travel that form thetransport system are interconnected. The application of thelevel of service in one mode influences other transport modesand changes depending on the type of travel and is divided inthree groups: urban, interurban and rural travel. In consideringthe significance of urban public transport there are three levelsof trip-end generation/attraction, with which six types of urbantravel can be identified. lnterurban travel is presented throughtwo main transport modes, rail and bus. Apart from businesstrips, air travel is relatively insignificant, primarily because ofthe prices and small distances. In rural areas, characterized bylow population density, there is the problem of travelling of theelderly people, as well as those without cars, as the difficulty ofproviding economic public transport services has increased becausethe number of carried passengers is small. This results inthe reduction in mobility and the quality of life. Attempts havebeen made to improve the standard of provision of public transportservices by introducing unconventional transport means.

  4. STUDY OF THE EXPERIENCE OF USE OF INTERMODAL TECHNOLOGY IN THE ORGANIZATION OF PASSENGER TRANSPORTATIONS

    Directory of Open Access Journals (Sweden)

    Liudmila Andreevna Paramonova

    2017-05-01

    Full Text Available This article examines the practice of applying intermodal technology and a single transportation document in the organization of passenger transportations, contains a review of the projects on the use of intermodal technology from theoretical point of view, an analysis of the implemented models.

  5. Technology assessment of future intercity passenger transportation systems. Volume 7: Study recommendations

    Science.gov (United States)

    1976-01-01

    Research and analysis tasks to alleviate negative impacts, to augment positive impacts, or to better understand the impacts produced by the potential introduction of the alternate transportation technologies are identified. The project team's recommendations on research and analysis efforts which have resulted from the technology assessment are provided. Many of the recommendations apply to the future supply of intercity passenger transportation services, categorized by mode. Other recommendations pertain to broad issues in intercity transportation--e.g., finance, regulation, traveler values--that will affect all modes.

  6. Prospects of introduction of innovative technology overhead passenger traffic on the basis of the passenger ropeways for the modernization of the public transport system of the Bryansk city

    Directory of Open Access Journals (Sweden)

    Lagerev A.V.

    2017-06-01

    Full Text Available In relation to the current situation in the field of public transport in the Bryansk city was shown the main problems in the implementation of innovative technology for the aerial passenger transport on the basis of suspended passenger ropeways (Cable metro. Shows the advantages of the cable metro-based mechatronic technology transportation compared to the traditional suspended passenger ropeways. Was made the technical and economic feasibility analysis of the construction of the cable metro in conditions of a highly urbanized urban environment of large cities, metropolises and urban agglomerations. Presented the statistical data on the development of vehicles in the Bryansk city in the period 2004-2016 years and based on the analysis of these data shows the feasibility of the development of aerial passenger transport as the most high-speed and environmentally friendly mode of transport compared with automobile and electric transport. Considered the possible sources of financing of design and construction works and shows the commercial attractiveness of the project to potential investors in the framework of public-private partnerships. For existing urban development and major transport flows of the Bryansk city was formulated proposals for the location of future transport cable metro lines, order their gaskets, the formation routes of movement of the rolling stock. Made the estimation of labor and financial costs for the implementation of the project of modernization of the public transport system of the city of Bryansk on the basis of the suspended passenger ropeways. The proposed option has the following characteristics: the number of transport lines - 6, total length - 54.8 km, total number of passenger boarding stations - 26, hub passenger stations – 6, the total number of intermediate supports – 100...110 pieces with a span between supports of 400...600 m. the cost of construction of transport lines and the purchase of necessary

  7. Assistive technology and passengers with special assistance needs in air transport: contributions to cabin design

    Directory of Open Access Journals (Sweden)

    Carina Campese

    2016-06-01

    Full Text Available Abstract There has been significant growth in air transport worldwide, as well as in Brazil. However, studies have emphasized that disabled, obese, and elderly passengers face difficulties when using this means of transport. Among these difficulties, issues related to passengers’ own assistive devices, including damage, loss, or the impossibility of using during the entire flight, stand out. Therefore, the present study aims to understand the trends in assistive technology focusing on cabin design. This research is based upon literature review, interviews with manufacturers and research centers, visits to specialized trade fairs, and patent search. The results revealed a great diversity of assistive products, its trends, and an increase in their use, which affect aircraft cabin design, especially in terms of space, access, and stowage of these devices.

  8. Technology assessment of future intercity passenger transporation systems. Volume 2: Identification of issues affecting intercity transportation

    Science.gov (United States)

    1976-01-01

    Papers on major issues and trends that affect the future of intercity transportation are presented. Specific areas covered include: political, social, technological, institutional, and economic mechanisms, the workings of which determine how future intercity transporation technologies will evolve and be put into service; the major issues of intercity transportation from the point of view of reform, including candidate transporation technologies; and technical analysis of trends affecting the evolution of intercity transportation technologies.

  9. Passenger transport research

    CSIR Research Space (South Africa)

    Mokonyama, Mathetha T

    2008-03-01

    Full Text Available In South Africa, airport and airline services epitomise what many would like to see in everyday public transport. The CSIR investigates what it will take to provide a commercial public transport service in South Africa which resembles commercial air...

  10. Passenger transport and household activity patterns

    DEFF Research Database (Denmark)

    Jørgensen, Kaj

    1997-01-01

    Review of Danish passenger transport patterns and analysis of energy consumption, emissions and safety impacts for selected typical households' travelling......Review of Danish passenger transport patterns and analysis of energy consumption, emissions and safety impacts for selected typical households' travelling...

  11. Passengers, Crowding and Complexity : Models for passenger oriented public transport

    NARCIS (Netherlands)

    P.C. Bouman (Paul)

    2017-01-01

    markdownabstractPassengers, Crowding and Complexity was written as part of the Complexity in Public Transport (ComPuTr) project funded by the Netherlands Organisation for Scientific Research (NWO). This thesis studies in three parts how microscopic data can be used in models that have the potential

  12. Environmental Assessment of Bus Transport in the Trondheim Region - Evaluation of Relevant Bus and Fuel Technologies and their Potential for Mitigating Emissions from Passenger Transportation

    OpenAIRE

    Buø, Tonje

    2015-01-01

    The overall aim of this thesis is to assess the carbon footprint of transport by bus in the Trondheim region. Bus transportation is promoted as a strategy both to combat local pollution problems in urban areas and to mitigate global greenhouse gas emissions from passenger transport. Still, the environmental impacts of bus transport have received fairly limited attention in research. The environmental impacts of bus transport are calculated through life cycle assessment. A model is develo...

  13. Parents as passengers during pediatric transport.

    Science.gov (United States)

    Lewis, M M; Holditch-Davis, D; Brunssen, S

    1997-01-01

    The transport environment presents a unique setting in which the feasibility, advantages, and disadvantages of passengers accompanying a patient must be assessed carefully. The purpose of this study was to describe the current practice of including parents as passengers during pediatric interfacility transport. One-hundred-eighty-eight critical care transport programs in the United States responded to a voluntary mail survey, providing information about current policies, practices, and crew perceptions of the advantages and disadvantages of carrying parents as passengers. Extra seating for passengers was available in 96% of ambulances, 86% of fixed-wing aircraft, and 54% of helicopters used for pediatric transport. Parents traveled as passengers in all types of vehicles; most frequently in ambulances and fixed-wing aircraft. Twenty percent of helicopter programs allowed parent passengers on more than half of their pediatric transports in this vehicle. Advantages of parent passengers included emotional benefit for the parent and child, availability of parents for history and consent, good public relations, and having the parent present if the child dies. Disadvantages included potential parent anxiety, crew distraction, and space limitations. This study reflects the widely diverse policies, practices, and opinions relevant to this topic and confirms a need for further study.

  14. PASSENGER FLOWS PREDICTION IN MAJOR TRANSPORTATION HUBS

    Directory of Open Access Journals (Sweden)

    O. O. Ozerova

    2013-11-01

    Full Text Available Purpose. An effective organization of passenger traffic, due to the reliability prediction of traffic flow in passenger transport hubs. In order to determine the parameters of prospective passenger transport areas it is essential to analyze the impact of various factors and determine the most influential ones. Methodology. The article presents the method of paired linear correlation for a more influential factors on passengers in intercity and commuter and possible use in predicting the linear regression equations. Passenger transport vessel areas and branches of industry are interconnected and are in the ratio of passengers and production. Findings. It is found that the coefficient of correlation is in complex dependence on the duration of the period of retrospective analysis. Evaluation of reliability correlation coefficients and coefficients of predictive models led to the conclusion that the population gives the most accurate prediction of passenger flows, providing account of changes in Ukraine during the period of transformation. Originality. Equations of dependence on the impact of macroeconomic indicators were obtained and the evaluation of the reliability results was received. Practical value. The results of analysis and calculations will make short-term forecasting of traffic flow.

  15. THE PROBLEMS OF PASSENGER TRANSPORTATIONS IN AN INTERNATIONAL COMMUNICATION

    Directory of Open Access Journals (Sweden)

    Yu. S. Barash

    2010-05-01

    Full Text Available The basic aspects of international passenger transportations in Ukraine are represented. The analysis of present situation in these transportations is carried out. Some variants of solving the problems of passenger transportations in an international communication are considered.

  16. Environmental Performance Evaluation of Ro-Ro Passenger Ferry Transportation

    DEFF Research Database (Denmark)

    Kristensen, Hans Otto Holmegaard; Hagemeister, Constantin

    2012-01-01

    /or emissions per transport unit, is related to the same unit for the different transport forms. For Ro-Ro passenger ferries it can be difficult to find a suitable common transport unit, as they often transport a mix of cargo, such as passengers, passenger cars, trucks, lorries, busses and other rolling...

  17. Development of Indian passenger transport

    Energy Technology Data Exchange (ETDEWEB)

    Ramanathan, R. [Indira Ghandi Institute of Development Research, Mumbai (India)

    1998-05-01

    The Indian transport sector has been studied using logistic substitution. The share of rail transport is declining, while road and air transport are increasing. These developments are not desirable from an energy-efficiency perspective. (author)

  18. Disruption Management in Passenger Railway Transportation

    DEFF Research Database (Denmark)

    Groth, Julie Jespersen; Potthoff, Daniel; Clausen, Jens

    2009-01-01

    This paper deals with disruption management in passenger railway transportation. In the disruption management process, many actors belonging to different organizations play a role. In this paper we therefore describe the process itself and the roles of the different actors. Furthermore, we discuss...

  19. Operations Research in PassengerRaiway Transportation

    NARCIS (Netherlands)

    D. Huisman (Dennis); L.G. Kroon (Leo); R.M. Lentink (Ramon); M.J.C.M. Vromans (Michiel)

    2005-01-01

    textabstractIn this paper we give an overview of state-of-the-art Operations Research models and techniques used in passenger railway transportation. For each planning phase (strategic, tactical and operational), we describe the planning problems arising there and discuss some models and algorithms

  20. Driverless operation for public passenger transport systems

    Energy Technology Data Exchange (ETDEWEB)

    Kehl, R. [Siemens AG, Erlangen (Germany). Bereich Verkehrstechnik

    2001-07-01

    The author presents the automation of new and existing lines as a possible solution to the twin problems of the growing need for public transport and the threat of collapse facing many public transport systems in the big conurbations as they wrestle against overloading. It emerges that automatic, driverless operation is a suitable approach to making systems more flexible and more attractive. Automation can increase the capacities of existing systems significantly and thus help them gain more passengers. (orig.)

  1. Integrated Intermodal Passenger Transportation System

    Science.gov (United States)

    Klock, Ryan; Owens, David; Schwartz, Henry; Plencner, Robert

    2012-01-01

    Modern transportation consists of many unique modes of travel. Each of these modes and their respective industries has evolved independently over time, forming a largely incoherent and inefficient overall transportation system. Travelers today are forced to spend unnecessary time and efforts planning a trip through varying modes of travel each with their own scheduling, pricing, and services; causing many travelers to simply rely on their relatively inefficient and expensive personal automobile. This paper presents a demonstration program system to not only collect and format many different sources of trip planning information, but also combine these independent modes of travel in order to form optimal routes and itineraries of travel. The results of this system show a mean decrease in inter-city travel time of 10 percent and a 25 percent reduction in carbon dioxide emissions over personal automobiles. Additionally, a 55 percent reduction in carbon dioxide emissions is observed for intra-city travel. A conclusion is that current resources are available, if somewhat hidden, to drastically improve point to point transportation in terms of time spent traveling, the cost of travel, and the ecological impact of a trip. Finally, future concepts are considered which could dramatically improve the interoperability and efficiency of the transportation infrastructure.

  2. How Important is the Integration of Public Passenger Transport

    Directory of Open Access Journals (Sweden)

    Mrníková Michaela

    2017-11-01

    Full Text Available The significance of the issue of an effective mode of passenger transport is currently increasing. On the one hand, there is the increasing economic demand of public passenger transport, on the other hand, there is the growing traffic share of individual automobile transport. The objective of the paper is to analyze public passenger transport without mutual integration of individual transport systems resulting in the fact that it is not sufficiently able to compete with individual automobile transport. It is proposed the integration of different modes of public passenger transport as a way to increase the competitiveness of public passenger transport. Aim of this paper is to analyze the individual elements of integration systems and describe why integration of public passenger transport systems is needed.

  3. Energy scenarios for European passenger transport in the year 2030

    Energy Technology Data Exchange (ETDEWEB)

    Rienstra, S.A.; Nijkamp, P. [Systems and Control Group, Faculty of Mechanical and Marine Engineering, Delft University of Technology, Delft (Netherlands)] Smokers, R.T.M. [ECN Policy Studies, Petten (Netherlands)

    1995-11-01

    In this paper four energy scenarios for West-European passenger transport are developed. To start with, the present transport system as a baseline case is described and analysed. Next, for each scenario it is outlined how the passenger transport system may look like in terms of the use of various existing and future transport technologies and the corresponding modal split. Based on this information, expected energy consumption features of the various transport modes are described, data on the present fuel supply and electricity generation system are provided, and estimations of the future energy system are given. Then, the energy consumption and CO2 emissions associated with the future passenger transport systems are calculated and these impacts are compared with the current system. The conclusion is that a large-scale reduction of CO2 emissions is possible in several ways, but that each option will cause many problems because drastic policy measures will have to be introduced, which may affect economic growth and the lifestyles of individuals. 4 figs., 11 tabs., 22 refs.

  4. Principles of Logistics Applied to Railway Passenger Transport

    Directory of Open Access Journals (Sweden)

    Vojtek Martin

    2017-01-01

    Full Text Available Main challenge of logistics is delivering right assortment of products in exact amount, to exact place, in exact time, ecologically and for exact price. Logistics deals with freight transport but when the word ‘products’ is changed to ‘passengers’, then many principles can be applied to passenger transport. Railway passenger transport is the key part of passenger transport system, so it is necessary to optimize it on logistics philosophy at first.

  5. Intercity passenger transportation: energy efficiency and conservation case study

    Energy Technology Data Exchange (ETDEWEB)

    Khan, A.M.

    1981-01-01

    To demonstrate a methodology for energy analysis and to advance technical knowledge on the energy conservation potential in intercity passenger transportation, this paper reports findings of a case study of the Toronto-Ottawa-Montreal multimodal system. From a total (direct and indirect) energy perspective for origin-destination travel, energy efficiency and conservation potential of technological improvements, modal shifts and increased load factors are reported. 11 refs.

  6. ISSUES OF ORGANIZING THE PASSENGER TRANSPORTATION ON US RAILWAYS

    Directory of Open Access Journals (Sweden)

    R. H. Korobiova

    2017-04-01

    Full Text Available Purpose. The paper focuses on a study of the US railway transport organization management during passenger transportation. Methodology. Studies were carried out on the basis of the analysis of literature sources and reporting data on passenger transportation in the USA. Findings. Negative trends in the work of the passenger complex of the Ukrainian railways are the slowdown in the volumes of transportation, the progressive aging of the rolling stock and the overall activity running at a loss for Ukrzaliznytsia. In this regard, the actual task for domestic rail transport is the implementation of industry reforms. Therefore, the paper presented the study of the experience of organizing the passenger transportation on US railways, whose peculiarity is the extremely high degree of competition between modes of transport. As a result of the conducted analysis for working conditions of the US and Ukrainian railways, the general conditions for the functioning of the railways in both countries connected with passenger transportation securing have been established. It was found that general condition for execution of railway passenger transportation for the United States and Ukraine is the subsidization of this activity and combined use of infrastructure for the freight and passengers’ transportations. In this connection, when developing approaches to reforming the passenger economy of Ukraine's railways, it is advisable to use the experience of the United States in assessing the social effectiveness of rail transport, the impact of passenger transportation on the conditions of freight trains handling, and combined use of railway infrastructure by freight and passenger companies. Originality. The author determined the general trends in the development of passenger railway transportation in the US and Ukraine. Practical value. The resulted methods of organizing the operation of the US railway passenger transportation complex can be adapted to solve

  7. Air passenger transport and the greenhouse effect

    International Nuclear Information System (INIS)

    Hubert, M.

    2004-11-01

    The commercial aviation sector accounts for 2.5 % of total worldwide anthropogenic carbon dioxide (CO 2 ) emissions. Water vapour (H 2 O) and NO x emissions, the formation of condensation trails and increased formation of cirrus clouds due to altitude (indirect effects) also accentuate the greenhouse effect. The Intergovernmental Panel on Climate Change (IPCC) estimates that the effects apart from CO 2 emissions are relatively higher for aviation than for other human activities. For one tonne of CO 2 emissions, the radiative forcing of aviation is twice as important as other activities. On this basis, a Paris-New York return trip for one passenger on a charter flight corresponds to a quarter of the total climate impact caused by the annual consumption of a French person. Increased mobility and a rise in international tourism suggest that past trends in the growth of air passenger transport will continue. The improvements in energy efficiency achieved are seemingly not sufficient to prevent a significant increase in the impact of air transport on climate change. (author)

  8. Integrating passenger and freight transportation : model formulation and insights

    NARCIS (Netherlands)

    Ghilas, V.; Demir, E.; Woensel, van T.

    2013-01-01

    Integrating passenger and freight ows creates attractive business opportunities because the same transportation needs can be met with fewer vehicles and emissions. This paper seeks an integrated solution for the transportation of passenger and freight simultaneously, so that fewer vehicles are

  9. Disruption Management in Passenger Railway Transportation

    DEFF Research Database (Denmark)

    Jespersen-Groth, Julie; Potthoff, Daniel; Clausen, Jens

    This paper deals with disruption management in passenger railway transportation. In the disruption management process, many actors belonging to different organizations play a role. In this paper we therefore describe the process itself and the roles of the different actors. Furthermore, we discuss...... the three main subproblems in railway disruption management: timetable adjustment, and rolling stock and crew re-scheduling. Next to a general description of these problems, we give an overview of the existing literature and we present some details of the specific situations at DSB S-tog and NS....... These are the railway operators in the suburban area of Copenhagen, Denmark, and on the main railway lines in the Netherlands, respectively. Since not much research has been carried out yet on Operations Research models for disruption management in the railway context, models and techniques that have been developed...

  10. Specific climate impact of passenger and freight transport

    Science.gov (United States)

    2010-01-01

    Emissions of short-lived species contribute significantly to : the climate impact of transportation. The magnitude of the effects : varies over time for each transport mode. This paper compares : first the absolute climate impacts of current passenge...

  11. Energy Chain Analysis of Passenger Car Transport

    Directory of Open Access Journals (Sweden)

    Hans Jakob Walnum

    2011-02-01

    Full Text Available Transport makes up 20 percent of the World’s energy use; in OECD countries this has exceeded 30 percent. The International Energy Agency (IEA estimates that the global energy consumption will increase by 2.1 percent annually, a growth rate that is higher than for any other sector. The high energy consumption means that transportation accounts for nearly 30 percent of CO2 emission in OECD countries and is also one of the main sources of regional and local air pollution. In this article, we analyze energy consumption and greenhouse gas emissions from passenger car transport using an energy chain analysis. The energy chain analysis consists of three parts: the net direct energy use, the energy required for vehicle propulsion; the gross direct chain, which includes the net direct energy consumption plus the energy required to produce it; and, finally, the indirect energy chain, which includes the energy consumption for production, maintenance and operation of infrastructure plus manufacturing of the vehicle itself. In addition to energy consumption, we also analyze emissions of greenhouse gases measured by CO2-equivalents. We look at the trade-offs between energy use and greenhouse gas emissions to see whether some drivetrains and fuels perform favourable on both indicators. Except for the case of electric cars, where hydropower is the only energy source in the Norwegian context, no single car scores favourably on both energy consumption and greenhouse gas emissions.

  12. Study of LH2 fueled subsonic passenger transport aircraft

    Science.gov (United States)

    Brewer, G. D.; Morris, R. E.

    1976-01-01

    The potential of using liquid hydrogen as fuel in subsonic transport aircraft was investigated to explore an expanded matrix of passenger aircraft sizes. Aircraft capable of carrying 130 passengers 2,780 km (1500 n.mi.); 200 passengers 5,560 km (3000 n.mi.); and 400 passengers on a 9,265 km (5000 n.mi.) radius mission, were designed parametrically. Both liquid hydrogen and conventionally fueled versions were generated for each payload/range in order that comparisons could be made. Aircraft in each mission category were compared on the basis of weight, size, cost, energy utilization, and noise.

  13. Determiantion of elasticity coefficient of demand for suburban passenger transport

    Directory of Open Access Journals (Sweden)

    Тетяна Михайлівна Григорова

    2015-06-01

    Full Text Available The regularity of changes in demand for suburban passenger road transport, depending on the value, is investigated. The results of the survey of passengers about changes of fare on the chosen route are given. It is built the curve of elasticity of demand for suburban bus transport use in labor and cultural and social movements. The equilibrium tariff for suburban road transport is defined

  14. Increasing the availability of urban passenger transport on objective ...

    African Journals Online (AJOL)

    Increasing the availability of urban passenger transport on objective control data ... mathematical modeling, probability theory and mathematical statistics, expert ... intended for development of methods and means of operative management of ...

  15. Route planning for airport personnel transporting passengers with reduced mobility

    DEFF Research Database (Denmark)

    Reinhardt, Line Blander; Clausen, Tommy; Pisinger, David

    transportation for the passengers with reduced mobility. It is often necessary for a passenger with reduced mobility to use several different modes of transport during their journey through the airport. Synchronization occurs at the locations where transport modes are changed as to not leave passengers...... unattended. A description of the problem together with a mathematical model is presented. The objective is to maximize the quality of service by scheduling as many of the passengers as possible, while ensuring a smooth transport with short waiting times. A simulated annealing based heuristic for solving...... the problem is presented. The algorithm makes use of an abstract representation of a candidate solution which in each step is transformed to an actual schedule by use of a greedy heuristic. Local search is performed on the abstract representation using advanced neighborhoods which modify large parts...

  16. Energy consumption and environmental effects of passenger transport modes. A life cycle study on passenger transport modes

    International Nuclear Information System (INIS)

    Kalenoja, H.

    1996-01-01

    Energy consumption and environmental effects of different passenger transport modes vary on the different stages of the fuel chain and during the production and maintenance of vehicles and infrastructure. Energy consumption and the environmental effects calculated per passenger mileage depend strongly on the vehicle occupancy. The properties of transport modes on urban areas and on the long distance transport have been evaluated in this study. The energy consumption and environmental effects calculated per passenger mileage have been assessed for passenger car, bus, tram, train, airplane and ferry. The emissions have been evaluated during the whole fuel chain. In this study only the airborne emissions have been taken into account. In the energy consumption calculations the energy content of vehicles and the infrastructure, energy consumption during the fuel chain and during the end use have been taken into consideration. (au)

  17. Changes in the Trade and Promotion of Passenger Air Transport

    Directory of Open Access Journals (Sweden)

    Cornelia Petroman

    2010-10-01

    Full Text Available Passenger air carriers will be able to systematically overbook transport capacities on certain aerial routes due to the quick adaptation to modern trading means, to the modern promotion of services and to the modern means of information of potential travellers. Though ticket booking in aerial transport made its debut as a simple process of automation of ticket sale, it soon turned into a strong marketing instrument with unexpected effects on competitiveness on the market of tourism aerial transport. The use of modern ways of operating Computer Reservation Systems and Billing Settlement Plans by passenger air companies and by tour operators improves service standards.

  18. Trends in passenger transport energy use in South Korea

    International Nuclear Information System (INIS)

    Eom, Jiyong; Schipper, Lee

    2010-01-01

    Having a clear understanding of transport energy use trends is crucial to identifying opportunities and challenges for efficient energy use for the transport sector. To this date, however, no detailed analysis has been conducted with regard to rapidly growing passenger transport energy use in South Korea. Using bottom-up data developed from a variety of recent sources, we described the trends of transport activity, energy use, and CO 2 emissions from South Korea's transport sector since 1986 with a particular focus on its passenger transport. By decomposing the trends in passenger transport energy use into activity, modal structure, and energy intensity, we showed that while travel activity has been the major driver of the increase in passenger transport energy use in South Korea, the increase was to some extent offset by the recent favorable structural shift toward bus travel and away from car travel. We also demonstrated that while bus travel has become less energy intensive since the Asian Financial Crisis, car travel has become increasingly energy intensive.

  19. Fuel and vehicle technology choices for passenger vehicles in achieving stringent CO2 targets: connections between transportation and other energy sectors.

    Science.gov (United States)

    Grahn, M; Azar, C; Williander, M I; Anderson, J E; Mueller, S A; Wallington, T J

    2009-05-01

    The regionalized Global Energy Transition (GET-R 6.0) model has been modified to include a detailed description of light-duty vehicle options and used to investigate the potential impact of carbon capture and storage (CCS) and concentrating solar power (CSP) on cost-effective fuel/vehicle technologies in a carbon-constrained world. Total CO2 emissions were constrained to achieve stabilization at 400-550 ppm, by 2100, at lowesttotal system cost The dominantfuel/vehicle technologies varied significantly depending on CO2 constraint future cost of vehicle technologies, and availability of CCS and CSP. For many cases, no one technology dominated on a global scale. CCS provides relatively inexpensive low-CO2 electricity and heatwhich prolongs the use of traditional ICEVs. CSP displaces fossil fuel derived electricity, prolongs the use of traditional ICEVs, and promotes electrification of passenger vehicles. In all cases considered, CCS and CSP availability had a major impact on the lowest cost fuel/vehicle technologies, and alternative fuels are needed in response to expected dwindling oil and natural gas supply potential by the end of the century.

  20. Small transport aircraft technology

    Science.gov (United States)

    Williams, L. J.

    1983-01-01

    Information on commuter airline trends and aircraft developments is provided to upgrade the preliminary findings of a NASA-formed small transport aircraft technology (STAT) team, established to determine whether the agency's research and development programs could help commuter aircraft manufacturers solve technical problems related to passenger acceptance and use of 19- to 50-passenger aircraft. The results and conclusions of the full set of completed STAT studies are presented. These studies were performed by five airplane manufacturers, five engine manufacturers, and two propeller manufacturers. Those portions of NASA's overall aeronautics research and development programs which are applicable to commuter aircraft design are summarized. Areas of technology that might beneficially be expanded or initiated to aid the US commuter aircraft manufacturers in the evolution of improved aircraft for the market are suggested.

  1. ANALYTICAL AND SIMULATION PLANNING MODEL OF URBAN PASSENGER TRANSPORT

    Directory of Open Access Journals (Sweden)

    Andrey Borisovich Nikolaev

    2017-09-01

    Full Text Available The article described the structure of the analytical and simulation models to make informed decisions in the planning of urban passenger transport. Designed UML diagram that describes the relationship of classes of the proposed model. A description of the main agents of the model developed in the simulation AnyLogic. Designed user interface integration with GIS map. Also provides simulation results that allow concluding about her health and the possibility of its use in solving planning problems of urban passenger transport.

  2. Defense Transportation Regulation. Part I: Passenger Movement

    Science.gov (United States)

    1998-03-01

    indicates apart action and the "N" in the special handling block identifies the passenger as a no-show. NAME RIC CHANL MSN- NBR /TVL-PD STS...will be retained and annotated with the origin, destination, ticket or token number(s) (when issued), and date issued to traveler. A rubber stamp...J. D. Pierce, TO. The use of a rubber stamp signature of the person authorized to sign GTRs is strictly prohibited. b. Other person(s) (acting TOs

  3. Passenger Transportation and Travel Curriculum Guide. Final Report.

    Science.gov (United States)

    Lininger, Carol

    This curriculum guide provides materials for a course in passenger transportation and travel. The four-credit, competency-based program provides students with skills necessary to obtain employment in the aviation industry, travel agencies, hotel/motel management, and car rental agencies. An overview of vocational-technical education at the school…

  4. Disruption Management of Rolling Stock in Passenger Railway Transportation

    NARCIS (Netherlands)

    L.K. Nielsen (Lars Kjaer); G. Maróti (Gábor)

    2009-01-01

    textabstractThis paper deals with real-time disruption management of rolling stock in passenger railway transportation. We present a generic framework for modeling disruptions in railway rolling stock schedules. The framework is presented as an online combinatorial decision problem where the

  5. Choosing the tariff for city passenger transportation in Kiev

    OpenAIRE

    Pilipenko, N.

    2006-01-01

    This article deals with basic problems of tariff policy of city passenger transportations by busses fleets of communal pattern ownership in Kiev. Principles of perfection of method of calculation of tariffs have been offered by introduction of rout and unique tariff.

  6. Toward a Shared Urban Transport System Ensuring Passengers & Goods Cohabitation

    Directory of Open Access Journals (Sweden)

    Anna Trentini

    2010-07-01

    Full Text Available The paper presents radical new urban transportation system concepts, potentially allowing changing the economic and environmental costs of passenger and freight transportation. The driver focuses on the concept of sharing, which means to make a joint use of transport resources, between passengers and goods flows. From a field observation of several existing solutions, an inductive reasoning enables us to move from a set of specific facts to establish an archetype for a radical new urban transportation system. Once the archetype defined, it is translated in real life through the example of the On Route proposal for London. The research frame of this paper is the ANR C-Goods (City Goods Operation Optimization using Decision support System project. Started in February 2009 the project involves four partners , and will end on 2011.

  7. Influence patterns of transportation parameters in suburban traffic on fatigue of passengers during bus waiting

    Directory of Open Access Journals (Sweden)

    Тетяна Михайлівна Григорова

    2015-05-01

    Full Text Available The change of transport fatigue of suburban traffic passengers during waiting transport waiting is investigated. The results of the processing site examinations allow defining the regularities of the influence of parameters of transportation process of passengers to change index activity of regulatory systems in passenger waiting at stopping points of suburban traffic. The discovered patterns were mathematically formalized

  8. Disruption Management in Passenger Transportation - from Air to Tracks

    DEFF Research Database (Denmark)

    Clausen, Jens

    2007-01-01

    of the world has show a dramatic increase as well. Public transportation by e.g. rail has come into focus, and hence also the service level provided by suppliers ad public transportation. These transportation systems are likewise very vulnerable to disruptions. In the airline industry there is a long tradition......Over the last 10 years there has been a tremendous growth in air transportation of passengers. Both airports and airspace are close to saturation with respect to capacity, leading to delays caused by disruptions. At the same time the amount of vehicular trac around and in all larger cities...

  9. Models in Planning Urban Public Passenger Transport

    Directory of Open Access Journals (Sweden)

    Gordana Štefančić

    2007-07-01

    Full Text Available The solving of complex problems in public transport requiresthe usage of models that are based on the estimate of demandin planning the transport routes. The intention is to predictwhat is going to happen in the future, if the proposed solutionsare implemented. In the majority of cases, the publictransport system is formed as a network and stored in the computermemory in order to start the evaluation process by specifYingthe number of trip origins and destinations in each zone.The trip distribution model which is used to calculate the numberof trips between each pair in the zone is based on the overalltravel frictions from zone to zone.

  10. 36 CFR 13.1316 - Commercial transport of passengers by motor vehicles.

    Science.gov (United States)

    2010-07-01

    ... passengers by motor vehicles. 13.1316 Section 13.1316 Parks, Forests, and Public Property NATIONAL PARK... National Park General Provisions § 13.1316 Commercial transport of passengers by motor vehicles. Commercial transport of passengers by motor vehicles on Exit Glacier Road is allowed without a written permit. However...

  11. The Application of Online Check-in in the Process of Passenger Handling in Air Transportation

    Directory of Open Access Journals (Sweden)

    František Adamčík

    2017-11-01

    Full Text Available Passenger handling is one of the most important activities any passenger is obliged to carry out prior to boarding the plane to depart. For the handling process to be safeguarded, it is inevitable to perform the services involved in it fast and efficiently so as to prevent idle times or delays during the procedures potentially resulting in delay of flight. By gradual development of the so-called web-based information technologies, some of the activities involved in the handling process can be delegated to the passengers themselves, thereby achieving a faster course of the passenger handling process. In this contribution the authors are dealing with the status quo of the on-line web-based check-in process in air transportation forecasting the expected course of events in these services in the future. Next, based on analyzing functions and characteristics of similar solutions available in the market, the authors are putting forward their new proposal of their own design of a self-service, on-line system of passenger handling with the aim to simplify and expedite the entire handling process. It is the aim of the authors to develop a competitive design in terms of costs as well as new function and services not offered by the hitherto existing with emphasis on improving efficiency of passenger handling at the airports. The resulting solution thanks to internet based technologies is platform independent and fully applicable to the process of airport passenger handling. To an equal extent, the solutions are being applied by the authors to the educational process, as a training tool for the preparation of the aviation personnel and also as part of simulation models for research in the field of airport processes optimization.

  12. Strategic Network Modelling for Passenger Transport Pricing

    NARCIS (Netherlands)

    Smits, E.-S.

    2017-01-01

    In the last decade the Netherlands has experienced an economic recession. Now, in 2017, the economy is picking up again. This growth does not only come with advantages because economic growth demands more from the transport system. Congestion is increasing again, the capacity of the train system is

  13. Toward a shared urban transport system passengers & Goods Cohabitation

    Directory of Open Access Journals (Sweden)

    Anna Trentini

    2011-10-01

    Full Text Available The paper presents radical new urban transportation system concepts, potentially allowing changing the economic and environmental costs of passenger and freight transportation. The driver focuses on the concept of sharing, which means to make a joint use of transport resources, between passengers and goods flows. From a field observation of several existing solutions, an inductive reasoning enables us to move from a set of specific facts to establish an archetype for a radical new urban transportation system. Once the archetype defined, it is translated in real life through the example of the On Route proposal for London.The research frame of this paper is the ANR ( French National Research Agency C-Goods (City Goods Operation Optimization using Decision support System project. Started in February 2009 the project involves four partners, (The multi-disciplinary French engineer school EIGSI (Ecole d’Ingénieurs en Génie des Systèmes Industriels, the French university ENMP (Ecole Nationale Supérieure des Mines de Paris, the Poitiers Urban Community (CAP, and the consulting service Interface Transport, specialized in transport economy and will end on 2012.

  14. Scenarios in decision-making. An application to CO2 emission reduction strategies in passenger transport

    Energy Technology Data Exchange (ETDEWEB)

    Rienstra, S.A.; Vleugel, J.M; Nijkamp, P. [Department of Social Economics, Vrije Universiteit, Amsterdam (Netherlands)] Smokers, R.T.M. [ECN Policy Studies, Petten (Netherlands)

    1995-12-01

    The usefulness of scenarios for decision-makers is analyzed. First, a theoretical introduction to the scenario methodology is presented. Next, four energy scenarios for West-European passenger transport are developed. To start with, the present transport system as a baseline case is described and analysed. For each scenario it is outlined how the passenger transport system may look like in terms of the use of various existing and future transport technologies and the corresponding modal split. Expected energy consumption features of the various transport modes are described, data on the present fuel supply and electricity generation system are presented, as well as estimations of the future energy system. The energy consumption and CO2 emissions associated with the future passenger transport systems are assessed and these impacts are compared with the current system. The conclusion is that these scenarios provide interesting policy options for decision-makers. A large-scale reduction of CO2 emissions is possible in several ways, but each way will cause many problems, since drastic policy measures will have to be introduced, which may affect economic growth and the lifestyles of individuals. 5 figs., 11 tabs., 24 refs.

  15. 49 CFR 176.166 - Transport of Class 1 (explosive) materials on passenger vessels.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Transport of Class 1 (explosive) materials on....166 Transport of Class 1 (explosive) materials on passenger vessels. (a) Only the following Class 1 (explosive) materials may be transported as cargo on passenger vessels: (1) Division 1.4 (explosive...

  16. Present and future energy consumption for passenger transportation in Germany

    Energy Technology Data Exchange (ETDEWEB)

    Kuhne, M.; Wolffram, U.

    1981-01-01

    Passenger transportation in Germany was investigated in order to determine real energy consumption. For typical passengers, energy consumption for overland travel and charter flights was studied. The energy needed for air traffic was compared with that for transportation overland (railway, car, bus), taking into account transportation to the airport or railway station. Transportation makes up about 17% of German primary energy consumption, i.e., road traffic 14%, railway traffic 1.6%, and air traffic 1%. Specific energy consumption (overland travel) of intercity trains, airplanes and cars is in the proportion 1.0 to 3.7 to 4.0 (1980) and is expected to be 1 to 2.4 to 3.1 by the year 2000. For holiday trips, specific energy consumption for bus, train, car and airplane travel is in the proportion 1.0 to 1.4 to 3.6 to 3.4 (1980) and is expected to be 1 to 1.4 to 2.5 to 2.9 by 2000. (ESA)

  17. Carbon dioxide emissions from passenger transport in China since 1949: Implications for developing sustainable transport

    International Nuclear Information System (INIS)

    Loo, Becky P.Y.; Li, Linna

    2012-01-01

    This paper traces the historical evolution and spatial disparity of CO 2 emissions from passenger transport in China. The general trends of CO 2 emissions from four passenger transport modes are estimated by both the distance-based and fuel-based methods. The results suggest that CO 2 emissions from road transport represented the leading source of passenger transport CO 2 emissions in China. Moreover, they have continued to grow rapidly. Air transport was the second largest contributor since 1998. Emissions from rail and water transport have remained relatively stable with lower emission intensity. At the provincial level, great regional disparity was noticeable, especially in road transport. Moreover, the decomposition analysis shows that income growth was the principal factor leading to the growth of passenger transport CO 2 emissions in China for both the 1949–1979 and 1980–2009 periods. The second most important factor was increased transport intensity and modal shifts for the former and the latter period, respectively. The main factor contributed to emission reduction was the lower emission intensity supported by policies, although the effect was weak. In the future, more policies to encourage modal shifts toward sustainable transport modes and travel reduction should be encouraged. - Highlights: ► CO 2 emissions from passenger transport in China were estimated. ► Road transport was the largest contributor to CO 2 emission. Air transport followed. ► Factors influencing CO 2 emissions growth are analyzed by decomposition analysis. ► Income growth, higher travel intensity and modal shift were driving CO 2 emissions up. ► Policies to promote modal shifts and travel demand reduction should be encouraged.

  18. Trends in passenger transport and freight energy use in Spain

    International Nuclear Information System (INIS)

    Mendiluce, Maria; Schipper, Lee

    2011-01-01

    This paper provides for the first time a complete analysis of recent trends in activity, carbon emissions, modal shares, energy intensities, vehicle use and fuels in the Spanish transport system from 1990 to 2008 and discusses policy options. Passenger and freight activities have increased in Spain and are projected to continue, presenting a challenge for sustainable mobility efforts; emissions have increased, mainly fueled by the rise in activity; modal shares have pulled away from public transport, with a decrease in bus and rail, towards an increase in car and air travel; energy intensities, though initially decreasing, are currently increasing; and fuel use has taken over 37% of Spanish final energy consumption. To target these issues the Spanish government has focused its efforts in targeting energy efficiency through dieselization, which has not led to positive results. More recently policies and measures have been directed towards redirecting modal shares and diversifying the fuel mix. Little has been done to reduce activity besides some anecdotic public awareness campaigns. Activity reduction may be achieved with regulations, restrictions and mobility plans; by increasing high speed rail and rail freight transport; by improving intermodality and tying the Spanish rail network with the EU; and with more urban transport planning at local level. - Highlights: → Complete analysis of recent trends in Spanish transport system from 1990 to 2008. → Passenger and freight activities have driven GHG emissions increase. → Modal shares have pulled away from public transport. → Policy efforts targeted energy efficiency and redirecting modal shares and diversifying the fuel mix. → Little has been done to reduce activity.

  19. Rationalization of Public Road Passenger Transport by Merging Bus Lines on the Example of Zadar County

    OpenAIRE

    Goran Kos; Predrag Brlek; Igor Franolić

    2012-01-01

    This study consists of the analysis of public passenger transport in Zadar County, that is, transport on the County and school lines and suggestions of transport rationalization. The rationalization comprises the application of the County and school lines integration, as well as suggestions of other measures which aim to reduce transport costs financed by Zadar County. The objectives to rationalize public passenger transport have been defined, all County transport lines of schoolchildren and ...

  20. Behavioural Models for Route Choice of Passengers in Multimodal Public Transport Networks

    DEFF Research Database (Denmark)

    Anderson, Marie Karen

    in the estimation of route choice models of public transport users based upon observed choices. Public transport route choice models have not benefitted from the same technological enhancements as car models because of the necessity (i) to collect additional information concerning lines and transfers, and (ii...... modes, public transport modes, lines, transfers, egress modes) is large. This thesis proposes a doubly stochastic approach for generating alternative routes that are relevant to travellers, since the method allows accounting for both perceived costs of the network elements and heterogeneity......The subject of this thesis is behavioural models for route choice of passengers in multimodal public transport networks. While research in sustainable transport has dedicated much attention toward the determinants of choice between car and sustainable travel options, it has devoted less attention...

  1. U. K. surface passenger transport sector. Energy consumption and policy options for conservation

    Energy Technology Data Exchange (ETDEWEB)

    Maltby, D; Monteath, I G; Lawler, K A

    1978-12-01

    Forecasts of U.K. energy consumption in this sector for four future scenarios based on different economic growth rates, energy prices, and energy conservation policies, show that by the year 2000, private transport will probably account for 76-94% of total energy consumption in surface passenger transport. A 33% increase in the average miles-per-gallon fuel consumption through technological improvements in private vehicles, conversion of private vehicles to diesel oil, additional fuel taxation equivalent to 25 or 50% fuel price increase, a 10% reduction in average car engine size (encouraged by taxation), and changes in public transport technology offer energy savings of about 20, 5-10, 6.3 or 12.5, 2-4, and 2%, respectively. There is considerable uncertainty about the outcome of these options.

  2. Behavioral pattern of commercial public transport passengers in Lagos metropolis

    Directory of Open Access Journals (Sweden)

    Oluwaseyi Joseph Afolabi

    2017-05-01

    Full Text Available This study examined the travel behavior of commercial public transport passengers in Lagos State, Nigeria. The descriptive research survey was used in order to assess the opinions of the respondents using the questionnaire. A total of 84 samples were used as representative population, while two null hypotheses were formulated and tested using the Pearson Product Moment Correlation Coefficient at 0.05 level of significant. The results that were obtained indicated that a positive correlation exists between frequency of   travel and commuters income in Lagos Metropolis and also that a positive correlation exists between frequency of travel and distance covered by commuters in Lagos Metropolis. Secondary data was also sourced to serve as complement to the primary data, thus allowing for a robust research. Descriptive statistical tools such as percentages were also adopted to present the socio-economic characteristics in the area. Findings showed that about 57% of sampled population are male, 62 % are civil servants, 48% of respondents travel for business purposes. Also, that majority of the respondents (50% said that the commercial public transport is highly prone to accident, while about 64% of the respondents commute on daily basis. It was established that lack of transport infrastructure coupled with poor road maintenance were seen as the leading causes of inaccessibility of the area.

  3. Investigations into a potential laser-NASP transport technology

    Science.gov (United States)

    1990-01-01

    Laser propelled flight/transport technology is surveyed. A detailed conceptual design is presented for an on-place Mercury-Lightcraft: other designs are briefly explored for larger, 15-place Executive Lightcraft, and 150 to 350 passenger Jumbo Lightcraft.

  4. Controlling air pollution from passenger ferries: cost-effectiveness of seven technological options.

    Science.gov (United States)

    Farrell, Alexander E; Corbett, James J; Winebrake, James J

    2002-12-01

    Continued interest in improving air quality in the United States along with renewed interest in the expansion of urban passenger ferry service has created concern about air pollution from ferry vessels. This paper presents a methodology for estimating the air pollution emissions from passenger ferries and the costs of emissions control strategies. The methodology is used to estimate the emissions and costs of retrofitting or re-powering ferries with seven technological options (combinations of propulsion and emission control systems) onto three vessels currently in service in San Francisco Bay. The technologies include improved engine design, cleaner fuels (including natural gas), and exhaust gas cleanup devices. The three vessels span a range of ages and technologies, from a 25-year-old monohull to a modern, high-speed catamaran built only four years ago. By looking at a range of technologies, vessel designs, and service conditions, a sense of the broader implications of controlling emissions from passenger ferries across a range of vessels and service profiles is provided. Tier 2-certified engines are the most cost-effective choice, but all options are cost-effective relative to other emission control strategies already in place in the transportation system.

  5. Passenger transportation problems of the public limited liability company “Lietuvos Geležinkeliai”

    Directory of Open Access Journals (Sweden)

    Stasys DAILYDKA

    2009-01-01

    Full Text Available The article provides an overview of passenger transportation on local and international routes by the Lithuanian railways. It identifies the reasons due to which passenger transportation has become increasingly loss-making. Also, factors that may encourage a greater number of people to travel by train are disclosed. The development of this sector up to 2030 is reviewed, i.e. a forecast for increasing the number of passengers, a perspective for the development of electric, diesel trains, passenger wagon fleet, and the levels of estimated investments are provided. It was established that after implementation of the measures envisaged, losses in the passenger transportation field could be cut by 2–3 times.

  6. Options for sustainable passenger transport: an assessment of policy choices

    NARCIS (Netherlands)

    Vleugel, J.M.; Rienstra, S.A.

    1995-01-01

    If the current trends in transport are not changed, a sustainable transport system is not feasible. In order to achieve such a state, new technologiesmay be an interesting option. In this context several success and failure factors for the introduction of new technologies are analyzed in this

  7. Synchronized dial-a-ride transportation of disabled passengers at airports

    DEFF Research Database (Denmark)

    Reinhardt, Line Blander; Clausen, Tommy; Pisinger, David

    2013-01-01

    The largest airports have a daily average throughput of more than 500 passengers with reduced mobility. The problem of transporting these passengers is in some cases a multi-modal transportation problem with synchronization constraints. A description of the problem together with a mathematical...... model is presented. The objective is to schedule as many of the passengers as possible, while ensuring a smooth transport with short waiting times. A simulated annealing based heuristic for solving the problem is presented. The algorithm makes use of an abstract representation of a candidate solution...

  8. A unit for environmentally adapted technology for transportation of passengers and goods. Individual personal transportation, electric and hybrid vehicles - a preliminary study; Enhet foer miljoeanpassad teknik foer person- och godstransporter - Individuell persontrafik, el- och hybridfordon - Foerstudie

    Energy Technology Data Exchange (ETDEWEB)

    Bauner, D; Lumsden, K [Chalmers Univ. of Technology, Goeteborg (Sweden). Dept. of Transportation and Logistics

    1996-02-01

    A unit for environmentally adapted transport at Chalmers Univ of Technology offers the possibility to enhance competence, to bestow decision makers with information and permits working with the processes needed. Regarding electric propulsion road vehicles, such a unit can coordinate the experiences from the Swedish projects. Further, it may maintain a secretariat and a managerial function to the database which will provide information to research councils, transport administrations and other government organizations, cities etc. The unit may also coordinate and submit research results and, in a long-term perspective, establish and administer field and laboratory vehicle testing. The unit may also function as a link between the vehicle industry and environmental organizations. The initial activities should include the establishment of a national database for electric vehicles and a full-time research post. The present study deals with individual personal transportation. Corresponding studies should be carried out for other areas in order to form a consistent profile for the unit. 38 refs

  9. Reducing the local environmental impacts of passenger transport

    Energy Technology Data Exchange (ETDEWEB)

    Maentynen, J; Kalenoja, H; Maekelae, S [Tampere Univ. of Technology (Finland). Inst. of Transportation Engineering

    1996-12-31

    The local injurious effects of traffic appear mostly in densely populated areas, where the demand for transport is high. The local environmental effects of transportation can be reduced by measures of urban planning, traffic planning, vehicle technology and economical restrictions. Land use planning, concentration of urban structure and promoting distance working are examples of expedients of urban planning. The methods of urban planning usually affect very slowly on transport structure, but they also have a significant and continuous influence on travel demand. The methods of traffic planning generally tend to increase the fluency of traffic flow or reduce private car traffic with diverse restrictions by supporting environmentally more favourable vehicles or modes of travel. The improvements in vehicle technology can be significant in the short run. By economical regulations it is possible to guide the demand for traffic to a desirable direction. The local injurious effects of traffic vary by the size of urban areas. Local conditions, such as urban structure, population density, structure of employment, and composition of transport structure, influence on travel pattern and modal split. In Tampere University of Technology several measures to reduce environmental effects and energy consumption of transportation has been evaluated. This article presents three types of categories. As technological measures the introduction of electric vehicles and the alternative bus fuels have been studied. In addition, the effects of introducing midibuses, the car pool system and the increasing of vehicle occupancy have been evaluated as measures, which generally increase transportation system efficiency. (author)

  10. Reducing the local environmental impacts of passenger transport

    Energy Technology Data Exchange (ETDEWEB)

    Maentynen, J.; Kalenoja, H.; Maekelae, S. [Tampere Univ. of Technology (Finland). Inst. of Transportation Engineering

    1995-12-31

    The local injurious effects of traffic appear mostly in densely populated areas, where the demand for transport is high. The local environmental effects of transportation can be reduced by measures of urban planning, traffic planning, vehicle technology and economical restrictions. Land use planning, concentration of urban structure and promoting distance working are examples of expedients of urban planning. The methods of urban planning usually affect very slowly on transport structure, but they also have a significant and continuous influence on travel demand. The methods of traffic planning generally tend to increase the fluency of traffic flow or reduce private car traffic with diverse restrictions by supporting environmentally more favourable vehicles or modes of travel. The improvements in vehicle technology can be significant in the short run. By economical regulations it is possible to guide the demand for traffic to a desirable direction. The local injurious effects of traffic vary by the size of urban areas. Local conditions, such as urban structure, population density, structure of employment, and composition of transport structure, influence on travel pattern and modal split. In Tampere University of Technology several measures to reduce environmental effects and energy consumption of transportation has been evaluated. This article presents three types of categories. As technological measures the introduction of electric vehicles and the alternative bus fuels have been studied. In addition, the effects of introducing midibuses, the car pool system and the increasing of vehicle occupancy have been evaluated as measures, which generally increase transportation system efficiency. (author)

  11. Regional disparity of urban passenger transport associated GHG (greenhouse gas) emissions in China: A review

    International Nuclear Information System (INIS)

    Hao, Han; Geng, Yong; Wang, Hewu; Ouyang, Minggao

    2014-01-01

    With China’s urbanization and motorization, greenhouse gas (GHG) emissions from urban passenger transport increased rapidly over recent years. As we estimated, China’s urban passenger transport associated motorized travel, energy consumption and lifecycle GHG emissions reached 2815 billion passenger kilometers (pkm), 77 million tons of oil equivalent (toe) and 335 million ton CO 2 equivalent in 2010, over half of which were located in eastern provinces. Over national level, GHG emissions by private passenger vehicles, business passenger vehicles, taxis, motorcycles, E-bikes, transit buses and urban rails accounted for 57.7%, 13.0%, 7.7%, 8.6%, 1.8%, 10.5% and 0.7% of the total. Significant regional disparity was observed. The province-level per capita GHG emissions ranged from 285 kg/capita in Guizhou to 1273 kg/capita in Beijing, with national average of 486 kg/capita. Depending on province context and local policy orientation, the motorization pathways of China’s several highest motorized provinces are quite diverse. We concluded that motorization rate and transport structure were the substantial factors determining urban passenger transport associated GHG emissions. Considering the great potential of urban passenger transport growth in China, policies guiding the optimization of transport structure should be in place with priority in eastern provinces. - Highlights: • Province-leveled motorized travel, energy consumption and GHG emissions in China were studied. • Significant regional disparities on urban passenger transport were observed. • Region-specific sustainable transport energy policies were discussed

  12. Intermodal Passenger Connectivity Database -

    Data.gov (United States)

    Department of Transportation — The Intermodal Passenger Connectivity Database (IPCD) is a nationwide data table of passenger transportation terminals, with data on the availability of connections...

  13. Rationalization of Public Road Passenger Transport by Merging Bus Lines on the Example of Zadar County

    Directory of Open Access Journals (Sweden)

    Goran Kos

    2012-07-01

    Full Text Available This study consists of the analysis of public passenger transport in Zadar County, that is, transport on the County and school lines and suggestions of transport rationalization. The rationalization comprises the application of the County and school lines integration, as well as suggestions of other measures which aim to reduce transport costs financed by Zadar County. The objectives to rationalize public passenger transport have been defined, all County transport lines of schoolchildren and other passengers have been analysed as well as actual deficiencies in the city, County and school transport needs. Road transport infrastructure, carriers and transportation vehicles have been analysed. The future transport demand has been reviewed and the prediction of passengers on lines has been provided. Within the next five to ten years no relevant changes will take place, meaning that the balance in transport supply and demand will not be disrupted significantly. This study presents the measures for transport cost reduction and increase in the safety level in the performance of public transport.

  14. Exploring Concepts of Operations for On-Demand Passenger Air Transportation

    Science.gov (United States)

    Nneji, Victoria Chibuogu; Stimpson, Alexander; Cummings, Mary; Goodrich, Kenneth H.

    2017-01-01

    In recent years, a surge of interest in "flying cars" for city commutes has led to rapid development of new technologies to help make them and similar on-demand mobility platforms a reality. To this end, this paper provides analyses of the stakeholders involved, their proposed operational concepts, and the hazards and regulations that must be addressed. Three system architectures emerged from the analyses, ranging from conventional air taxi to revolutionary fully autonomous aircraft operations, each with vehicle safety functions allocated differently between humans and machines. Advancements for enabling technologies such as distributed electric propulsion and artificial intelligence have had major investments and initial experimental success, but may be some years away from being deployed for on-demand passenger air transportation at scale.

  15. Tripartite equilibrium strategy for a carbon tax setting problem in air passenger transport.

    Science.gov (United States)

    Xu, Jiuping; Qiu, Rui; Tao, Zhimiao; Xie, Heping

    2018-03-01

    Carbon emissions in air passenger transport have become increasing serious with the rapidly development of aviation industry. Combined with a tripartite equilibrium strategy, this paper proposes a multi-level multi-objective model for an air passenger transport carbon tax setting problem (CTSP) among an international organization, an airline and passengers with the fuzzy uncertainty. The proposed model is simplified to an equivalent crisp model by a weighted sum procedure and a Karush-Kuhn-Tucker (KKT) transformation method. To solve the equivalent crisp model, a fuzzy logic controlled genetic algorithm with entropy-Bolitzmann selection (FLC-GA with EBS) is designed as an integrated solution method. Then, a numerical example is provided to demonstrate the practicality and efficiency of the optimization method. Results show that the cap tax mechanism is an important part of air passenger trans'port carbon emission mitigation and thus, it should be effectively applied to air passenger transport. These results also indicate that the proposed method can provide efficient ways of mitigating carbon emissions for air passenger transport, and therefore assist decision makers in formulating relevant strategies under multiple scenarios.

  16. Certification and safety aspects relating to the transport of passengers on high altitude balloons in Europe

    Science.gov (United States)

    Schoenmaker, Annelie

    2014-07-01

    High-altitude balloons typically fly between 25 and 50 km in altitude, which, while below the Karman line of 100 km, is yet far above the altitudes typically flown by aircraft. For example, the highest-flying commercial aircraft - the Concorde - had a maximum cruising altitude of only 18 km. zero2infinity, a Spanish company, is currently developing a pressurized pod named “bloon” which will be capable of lifting six people, including two pilot crew members and four paying passengers, to an altitude of 36 km through the use of high-altitude balloons. The boundary between Airspace and Outer Space has never been legally defined, mostly because of the lack of activities taking place between the altitude where airplanes fly and the lowest orbiting spacecraft. High-altitude balloons do fly at these in-between altitudes and the prospect of commercializing access to these parts of the stratosphere poses some questions in a new light. Given the relatively low altitude at which they fly, it may well be that these types of balloons would be considered to operate exclusively within air space. However, given the technology involved in crewed high altitude balloon flights, which is more similar to spacecraft engineering than to traditional hot-air or gas ballooning, it is necessary to evaluate the various legal regimes, codes, and regulations that would apply to such flights, especially regarding licenses and liabilities. For high altitude balloon flights commencing in Europe, the European Aviation Safety Agency (EASA) would very likely be the competent certification or licensing agency for these flights, although there would likely be input from various national aviation authorities as well. However, because the European Commission (EC) has not yet issued regulations regarding commercial spaceflight, particularly the use of high altitude balloons, new rules and regulations governing such flights may still need to be drafted and promulgated. With the development of

  17. The Passenger Satisfaction Survey in the Regional Integrated Public Transport System

    Directory of Open Access Journals (Sweden)

    Martina Valaskova

    2008-11-01

    Full Text Available This article describes the Quality criteria Method of the Servicesin the Integrated Public Transport System in Slovak Republic.The proposed method is based on the detailed list of theQuality criteria of the Services in Public Transport from theview of passengers. The criteria are determined based on theSlovak Technical Norm STN EN 138 16 which is related toquality of transport. The method has been applied in RegionalIntegrated Public Transport System of Zilina (ZRIDS in theform of Passenger Quality Satisfaction Survey.

  18. Dynamics of Air Passenger Transportation in Eastern Romania

    Directory of Open Access Journals (Sweden)

    Dan Păuna

    2013-10-01

    Full Text Available The concept of an air route mile is, of course, entirely different from that of a road or rail route mile. An air route is a direct service between two cities. The too-rapid development of the air route system must inevitably result in an average intensity of operations on the route, and this means the frequencies are low or high, or the airplanes used are profitable or unprofitable. The purpose of this paper is to emphasize air passenger dynamics in Romania and to calculate specific indicators regarding this calculation for the airports in eastern Romania in 2011t., this, because the air passenger featurea indicator passenger – kilometer, starting with 2009 no longer calculate for aviation and shipping.

  19. Methods for analysis of passenger trip performance in a complex networked transportation system

    Science.gov (United States)

    Wang, Danyi

    2007-12-01

    The purpose of the Air Transportation System (ATS) is to provide safe and efficient transportation service of passengers and cargo. The on-time performance of a passenger's trip is a critical performance measurement of the Quality of Service (QOS) provided by any Air Transportation System. QOS has been correlated with airline profitability, productivity, customer loyalty and customer satisfaction (Heskett et al. 1994). Btatu and Barnhart have shown that official government and airline on-time performance metrics (i.e. flight-centric measures of air transportation) fail to accurately reflect the passenger experience (Btatu and Barnhart, 2005). Flight-based metrics do not include the trip delays accrued by passengers who were re-booked due to cancelled flights or missed connections. Also, flight-based metrics do not quantify the magnitude of the delay (only the likelihood) and thus fails to provide the consumer with a useful assessment of the impact of a delay. Passenger-centric metrics have not been developed because of the unavailability of airline proprietary data, which is also protected by anti-trust collusion concerns and civil liberty privacy restrictions. Moveover, the growth of the ATS is trending out of the historical range. The objectives of this research were to (1) estimate ATS-wide passenger trip delay using publicly accessible flight data, and (2) investigate passenger trip dynamics out of the range of historical data by building a passenger flow simulation model to predict impact on passenger trip time given anticipated changes in the future. The first objective enables researchers to conduct historical analysis on passenger on-time performance without proprietary itinerary data, and the second objective enables researchers to conduct experiments outside the range of historic data. The estimated passenger trip delay was for 1,030 routes between the 35 busiest airports in the United States in 2006. The major findings of this research are listed as

  20. Energy study of rail passenger transportation. Volume 2. Description of operating systems. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Henderson, C.; Ellis, H. T.; Wilhelm, J. P.

    1979-08-01

    The rail passenger systems of the US are described in terms of selected physical, operating, and economic characteristics, and relates services rendered to energy usage and costs. Rail passenger transportation exists in 4 distinct forms: intercity railroads, suburban railroads, heavy-rail transit, and light-rail transit. Each form varies in technical equipment, design of facilities, operating practices, size of systems. Specific data for the national rail passenger network and the Boston, Chicago, Cleveland, New York, Philadelphia, Pittsburgh, and San Francisco regions and the Washington Metropolitan area transit authority are presented.

  1. Rapid Passenger Transport in North America in 21st Century

    Directory of Open Access Journals (Sweden)

    Wolf Tietze

    2012-10-01

    Full Text Available The occurrence of outstanding transport innovations maylead to monumental reconstruction in large urbanised regionssuch as North America. The decisive factor in this is the introductionofTransrapid, a new rapid transport technology basedon the principle of magnetic levitation (Maglev.This paper uses the urban network of North America Eastof the 1 O(Jh meridian, together with the smaller region of California,to demonstrate the advantages of innovative transporttechnology as the optimal link between road and air transport.Despite requiring less energy input, achieving better adaptationto the topography of the country, causing less noise and beingsubject to less wear and tear, Transrapid achieves almost twicethe speed of conventional trains.

  2. Harnessing innovation in passenger transport research in Africa

    CSIR Research Space (South Africa)

    Mokonyama, Mathetha T

    2006-07-01

    Full Text Available flight paths in the aviation industry, in the light of the increased competitiveness and travel demand. Within the context of advancing initiatives such as the New Partnership for Africa’s Development (NEPAD) objectives, Ssamula and Del Mistro... Conference (SATC), Pretoria, pp. 439-447. [7] Krysman, S. Schmitz, P. 2005. The use of cellphone technology in activity and travel data collection, Proceedings of the 24th Southern African Transport Conference (SATC), Pretoria, pp. 696-705. [8...

  3. Innovative Technologies in Transportation

    Science.gov (United States)

    2004-12-01

    An historical overview of the transportation infrastructure of the United States and Texas is provided. Data for trends in transportation is analyzed and projections for the future are postulated. A survey of current technologies in transportation is...

  4. Distribution pattern of public transport passenger in Yogyakarta, Indonesia

    Science.gov (United States)

    Narendra, Alfa; Malkhamah, Siti; Sopha, Bertha Maya

    2018-03-01

    The arrival and departure distribution pattern of Trans Jogja bus passenger is one of the fundamental model for simulation. The purpose of this paper is to build models of passengers flows. This research used passengers data from January to May 2014. There is no policy that change the operation system affecting the nature of this pattern nowadays. The roads, buses, land uses, schedule, and people are relatively still the same. The data then categorized based on the direction, days, and location. Moreover, each category was fitted into some well-known discrete distributions. Those distributions are compared based on its AIC value and BIC. The chosen distribution model has the smallest AIC and BIC value and the negative binomial distribution found has the smallest AIC and BIC value. Probability mass function (PMF) plots of those models were compared to draw generic model from each categorical negative binomial distribution models. The value of accepted generic negative binomial distribution is 0.7064 and 1.4504 of mu. The minimum and maximum passenger vector value of distribution are is 0 and 41.

  5. Price and income elasticities of demand for passenger transport fuels in Spain. Implications for public policies

    International Nuclear Information System (INIS)

    Romero-Jordan, Desiderio; Del Rio, Pablo; Jorge-Garcia, Marta; Burguillo, Mercedes

    2010-01-01

    The significant increase in passenger transport activity (cars) experienced by Spain and its associated increase in energy consumption have several associated negative aspects, including a greater dependence on foreign energy sources and higher GHG emissions. Therefore, reducing the level of transport activity would bring important socioeconomic and environmental benefits. The aim of this paper, which focuses on energy consumption in the passenger transport, is fourfold: (1) to provide a diagnostic of energy consumption in the Spanish passenger transport system and the related problems; (2) to develop a model to calculate price and income elasticities of demand for transport fuel; (3) to apply this model to the Spanish passenger transport sector; (4) to infer policy recommendations derived from the results of the diagnostic and the model. It is claimed that, in view of those low price elasticities and high income elasticities and if a reduction in the scale of transport activity is deemed socially desirable, a combination of instruments is necessary. Fuel taxes play an important role within this combination. Apart from their long-term effects, the low price elasticity of demand for transport fuel would allow the collection of a significant amount of revenues, which could eventually be earmarked to encourage reductions in private transport demand and modal shifts with other instruments. (author)

  6. Price and income elasticities of demand for passenger transport fuels in Spain. Implications for public policies

    Energy Technology Data Exchange (ETDEWEB)

    Romero-Jordan, Desiderio [Universidad Rey Juan Carlos, Madrid (Spain); Del Rio, Pablo [Institute for Public Goods and Policies (IPP), Consejo Superior de Investigaciones Cientificas (CSIC), C/Albasanz, 26-28, Madrid 28037 (Spain); Jorge-Garcia, Marta [Universidad de Leon (Spain); Burguillo, Mercedes [Universidad de Alcala (Spain)

    2010-08-15

    The significant increase in passenger transport activity (cars) experienced by Spain and its associated increase in energy consumption have several associated negative aspects, including a greater dependence on foreign energy sources and higher GHG emissions. Therefore, reducing the level of transport activity would bring important socioeconomic and environmental benefits. The aim of this paper, which focuses on energy consumption in the passenger transport, is fourfold: (1) to provide a diagnostic of energy consumption in the Spanish passenger transport system and the related problems; (2) to develop a model to calculate price and income elasticities of demand for transport fuel; (3) to apply this model to the Spanish passenger transport sector; (4) to infer policy recommendations derived from the results of the diagnostic and the model. It is claimed that, in view of those low price elasticities and high income elasticities and if a reduction in the scale of transport activity is deemed socially desirable, a combination of instruments is necessary. Fuel taxes play an important role within this combination. Apart from their long-term effects, the low price elasticity of demand for transport fuel would allow the collection of a significant amount of revenues, which could eventually be earmarked to encourage reductions in private transport demand and modal shifts with other instruments. (author)

  7. Assessment of Passenger Satisfaction with Public Bus Transport Services: A Case Study of Lucknow City (India

    Directory of Open Access Journals (Sweden)

    Singh Sanjay

    2016-12-01

    Full Text Available The main aim of this study is threefold. First, it tries to assess the passenger satisfaction with public bus transport services in the city of Lucknow in India. Second, it tries to examine the service quality attributes that influence the passenger satisfaction. Third, it tries to evaluate the relative importance of service quality attributes to find out the priority for service quality improvements to enhance passenger satisfaction. The study is based on a survey of objective as well as subjective questions conducted between May and July 2014. Five major bus stops of Lucknow were selected for the survey. Total 148 respondents were randomly selected to elicit their overall satisfaction and factors that influence their satisfaction in the use of public bus transport services in Lucknow using a self-rated questionnaire. The collected sample of responses is subjected to principal component analysis, a statistical technique for dimensionality reduction of the dataset, and descriptive analysis. The result of theses analyses shows that passengers are mostly dissatisfied with public bus transport services in Lucknow. Using principal component analysis, five underlying factors were extracted that influenced passenger satisfaction with public bus transport services in the city. Out of these five factors, comfort and safety has the greatest impact on overall satisfaction, followed by the adequacy of capacity of public bus transport services, orderly and clean environment inside buses, elegant design of buses and bus stops, and accessibility to public bus transport services in the city. The study thus provides a direction for public bus transport administration in the city to understand the gaps that exist and try to fill them to improve its services so that passenger satisfaction can be enhanced and consequently more people can be attracted towards public bus transport.

  8. The Cooperative Organization And Rural Passenger Transportation: An Approach to Community Development.

    Science.gov (United States)

    Stommes, Eileen S.

    The need for passenger transportation is widely recognized by rural communities. Shrinking federal funding has led many communities and human service agencies to experiment with innovative approaches to provide transportation services. One such approach is the use of cooperative organizations to provide needed services. A study conducted by the…

  9. Direct energy rebound effect for road passenger transport in China: A dynamic panel quantile regression approach

    International Nuclear Information System (INIS)

    Zhang, Yue-Jun; Peng, Hua-Rong; Liu, Zhao; Tan, Weiping

    2015-01-01

    The transport sector appears a main energy consumer in China and plays a significant role in energy conservation. Improving energy efficiency proves an effective way to reduce energy consumption in transport sector, whereas its effectiveness may be affected by the rebound effect. This paper proposes a dynamic panel quantile regression model to estimate the direct energy rebound effect for road passenger transport in the whole country, eastern, central and western China, respectively, based on the data of 30 provinces from 2003 to 2012. The empirical results reveal that, first of all, the direct rebound effect does exist for road passenger transport and on the whole country, the short-term and long-term direct rebound effects are 25.53% and 26.56% on average, respectively. Second, the direct rebound effect for road passenger transport in central and eastern China tends to decrease, increase and then decrease again, whereas that in western China decreases and then increases, with the increasing passenger kilometers. Finally, when implementing energy efficiency policy in road passenger transport sector, the effectiveness of energy conservation in western China proves much better than that in central China overall, while the effectiveness in central China is relatively better than that in eastern China. - Highlights: • The direct rebound effect (RE) for road passenger transport in China is estimated. • The direct RE in the whole country, eastern, central, and western China is analyzed. • The short and long-term direct REs are 25.53% and 26.56% within the sample period. • Western China has better energy-saving performance than central and eastern China.

  10. Well-to-Wheel Analysis of Solar Hydrogen Production and Utilization for Passenger Car Transportation

    Energy Technology Data Exchange (ETDEWEB)

    Felder, R.; Meier, A.

    2006-07-01

    A well-to-wheel analysis is conducted for solar hydrogen production, transport, and usage in future passenger car transportation. Solar hydrogen production methods and selected conventional production Technologies are examined using a life cycle assessment (LCA). Utilization of hydrogen in fuel cells is compared with advanced gasoline and diesel power trains. Solar scenarios show distinctly lower greenhouse gas (GHG) emissions than fossil-based scenarios. For example, using solar hydrogen in fuel cell cars reduces life cycle GHG emissions by 75% compared to advanced fossil fuel power trains and by more than 90% if car and road infrastructure are not considered. Solar hydrogen production allows a reduction of fossil energy requirements by a factor of up to 10 compared to using conventional Technologies. Major environmental impacts are associated with the construction of the steel-intensive infrastructure for solar energy collection due to mineral and fossil resource consumption as well as discharge of pollutants related to today's steel production technology. (Author)

  11. Air passenger transport and the greenhouse effect; Transport aerien de passagers et effet de serre

    Energy Technology Data Exchange (ETDEWEB)

    Hubert, M

    2004-11-01

    The commercial aviation sector accounts for 2.5 % of total worldwide anthropogenic carbon dioxide (CO{sub 2}) emissions. Water vapour (H{sub 2}O) and NO{sub x} emissions, the formation of condensation trails and increased formation of cirrus clouds due to altitude (indirect effects) also accentuate the greenhouse effect. The Intergovernmental Panel on Climate Change (IPCC) estimates that the effects apart from CO{sub 2} emissions are relatively higher for aviation than for other human activities. For one tonne of CO{sub 2} emissions, the radiative forcing of aviation is twice as important as other activities. On this basis, a Paris-New York return trip for one passenger on a charter flight corresponds to a quarter of the total climate impact caused by the annual consumption of a French person. Increased mobility and a rise in international tourism suggest that past trends in the growth of air passenger transport will continue. The improvements in energy efficiency achieved are seemingly not sufficient to prevent a significant increase in the impact of air transport on climate change. (author)

  12. An empirical study of direct rebound effect for passenger transport in urban China

    International Nuclear Information System (INIS)

    Wang, H.; Zhou, P.; Zhou, D.Q.

    2012-01-01

    Transport sector accounts for about 8% of total energy consumption in China and this share will likely increase in the visible future. Improving energy efficiency has been considered as a major way for reducing transport energy use, whereas its effectiveness might be affected by the rebound effect. This paper estimates the direct rebound effect for passenger transport in urban China by using the linear approximation of the Almost Ideal Demand System model and simulation analysis. Our empirical results reveal the existence of direct rebound effect for passenger transport in urban China. A majority of the expected reduction in transport energy consumption from efficiency improvement could be offset due to the existence of rebound effect. We have further investigated the relationship between the magnitude of direct rebound effect and households' expenditure. It was found that the direct rebound effect for passenger transport tends to decline with the increase of per capita household consumption expenditure. - Highlights: ► The magnitude of direct rebound effect for urban passenger transport in China is 96%. ► The rebound effect in China could be larger than that in developed countries. ► The rebound effect in China declined with the increase of per capita expenditure.

  13. Instilling safety culture in the passenger rail transport industry within the South African context

    Directory of Open Access Journals (Sweden)

    Khulumane (John Maluleke

    2013-07-01

    Full Text Available South Africa has two major rail operators that constitute the rail transport industry. These are Transnet Freight Rail (TFR, which operates freight and the Passenger Rail Agency of South Africa (PRASA. Although the Railway Safety Regulator (2011:29 reported the year on year declining trend of collisions, the main concern is that the costs incurred for each year’s incidents is escalating. This article is concerned with the declining safety standards of these operators as evidenced by 742 collisions recorded during the 2011/2012 financial year for both operators. The focus is mainly on collisions during the movement of rolling stock within the PRASA environment. The analysis of the occurrences is narrowed down, with the emphasis on the province of Gauteng. In the analysis of the causes of these collisions, the problems that led to the root causes of these collisions is reported. Of critical importance is that every transport operator is faced with the challenges of how to effectively respond to the basic transport needs and requirements of the travelling public. The transport users’ need is to travel between the two geographical points. During the journey between these geographical points, the operator has safety and security requirements and must provide a reliable, accessible and affordable transport system. As the travelling public becomes more affluent, the transport needs become open ended and require much more rational public choices. The rail transport system remains a vital or indispensable business sector of the economy. By investing in new technology, rolling stock and infrastructure, we woud see an increase in innovation, competitiveness, and an elevated standard of living.

  14. Environmental and Financial Evaluation of Passenger Vehicle Technologies in Belgium

    OpenAIRE

    Messagie, Maarten; Lebeau, Kenneth; Coosemans, Thierry; Macharis, Cathy; Mierlo, Joeri van

    2013-01-01

    Vehicles with alternative drive trains are regarded as a promising substitute for conventional cars, considering the growing concern about oil depletion and the environmental impact of our transportation system. However, “clean” technologies will only be viable when they are cost-efficient. In this paper, the environmental impacts and the financial costs of different vehicle technologies are calculated for an average Belgian driver. Environmentally friendly vehicles are compared with conventi...

  15. Motorcycle crashes potentially preventable by three crash avoidance technologies on passenger vehicles.

    Science.gov (United States)

    Teoh, Eric R

    2018-07-04

    The objective of this study was to identify and quantify the motorcycle crash population that would be potential beneficiaries of 3 crash avoidance technologies recently available on passenger vehicles. Two-vehicle crashes between a motorcycle and a passenger vehicle that occurred in the United States during 2011-2015 were classified by type, with consideration of the functionality of 3 classes of passenger vehicle crash avoidance technologies: frontal crash prevention, lane maintenance, and blind spot detection. Results were expressed as the percentage of crashes potentially preventable by each type of technology, based on all known types of 2-vehicle crashes and based on all crashes involving motorcycles. Frontal crash prevention had the largest potential to prevent 2-vehicle motorcycle crashes with passenger vehicles. The 3 technologies in sum had the potential to prevent 10% of fatal 2-vehicle crashes and 23% of police-reported crashes. However, because 2-vehicle crashes with a passenger vehicle represent fewer than half of all motorcycle crashes, these technologies represent a potential to avoid 4% of all fatal motorcycle crashes and 10% of all police-reported motorcycle crashes. Refining the ability of passenger vehicle crash avoidance systems to detect motorcycles represents an opportunity to improve motorcycle safety. Expanding the capabilities of these technologies represents an even greater opportunity. However, even fully realizing these opportunities can affect only a minority of motorcycle crashes and does not change the need for other motorcycle safety countermeasures such as helmets, universal helmet laws, and antilock braking systems.

  16. Small Transport Aircraft Technology /STAT/ Propulsion Study

    Science.gov (United States)

    Heldenbrand, R. W.; Baerst, C. F.; Rowse, J. H.

    1980-01-01

    The NASA Small Transport Aircraft Technology (STAT) Propulsion Study was established to identify technology requirements and define the research and development required for new commuter aircraft. Interim results of the studies defined mission and design characteristics for 30- and 50-passenger aircraft. Sensitivities were defined that relate changes in engine specific fuel consumption (SFC), weight, and cost (including maintenance) to changes in the aircraft direct operating cost (DOC), takeoff gross weight, and empty weight. A comparison of performance and economic characteristics is presented between aircraft powered by 1980 production engines and those powered by a 1990 advanced technology baseline engine.

  17. Comparative Analysis of Passenger Traffic Fleets in Asian Cities: Technology, Driving Activities, and Emission

    Science.gov (United States)

    KIM Oanh, N. T.; Huynh, H. V.; Saikawa, E.

    2015-12-01

    The road transport sector is the major emission source of toxic air pollutants and greenhouse gases (GHGs) in large Asian cities. This paper comparatively analyzed on-road passenger traffic fleets (cars, buses, taxis, motorcycles), using local data collected in cities of Bangkok (BKK), Kathmandu, Hanoi, Ho Chi Minh City (HCMC), and Yangon. Surveys were done in 2010-2014 to obtain information on vehicle technology, driving activities (speed, distance, number, and types of starts), traffic density, and fuel characteristics. Large shares of pre-Euro vehicles were still observed, especially for public buses. The most advanced technology was Euro4, which was observed in small shares (<5%) of the personal car fleets in BKK, HCMC, and Yangon. Euro3 was generally the most advanced technology found in other fleets in these cities. Motorcycles (MC) was the most dominant fleet in all cities, except in Yangon, where they were not allowed. Low vehicle speeds, mainly below 25 km/h, were observed for all vehicle types, indicating traffic jams. Natural gas and LPG had considerable shares in BKK and Yangon while for other cities diesel and gasoline were still the two major fuels used in transportation. Running emission factors (EF) of buses and taxis in Kathmandu were considerably higher than other cities due to its hilly topography, low speeds, high mileage, and less advanced vehicle technologies. The number of passenger vehicles per 1000 people were 400-500 in HCMC and Hanoi (mainly by MC) and in BKK (also by cars), moderate in Kathmandu (200) and the lowest in Yangon (40) because of the MC ban. Annual emissions of the passenger fleets were calculated for each city using the International Vehicle Emission (IVE) for 14 species. BC and OC emissions were estimated using their fractions of PM10 emission. Annual emission per capita of toxic air pollutants and GHGs was analyzed. For example, the emission in kg/year/person for CO, VOC, NOx and PM10 in these cities was 24-150 for CO, 0

  18. Integrated assessment of energy efficiency technologies and CO_2 abatement cost curves in China’s road passenger car sector

    International Nuclear Information System (INIS)

    Peng, Bin-Bin; Fan, Ying; Xu, Jin-Hua

    2016-01-01

    Highlights: • Energy efficiency technologies in Chinese passenger cars are classified in detail. • CO_2-reduction potential and abatement cost are analyzed for technology bundles. • Marginal abatement cost curve is established from both micro and macro perspectives. • Spark ignition, diesel and hybrid electric vehicle paths should be firstly promoted. • Technology promotion should start from the area of taxies and high-performance cars. - Abstract: Road transport is one of the main sources of energy consumption and CO_2 emissions. It is essential to conserve energy and reduce emissions by promoting energy efficiency technologies (EETs) in this sector. This study first identifies EETs for the passenger cars and then classifies them into various technology bundles. It then analyzes the CO_2-reduction potentials and emissions abatement costs of 55 type-path, 246 type-path-technology, and 465 type-path-subtechnology bundles from micro-vehicular and macro-industrial perspectives during 2010–2030, based on which marginal abatement cost (MAC) curve for China’s road passenger car sector is established. Results show that the cumulative CO_2-reduction potential of EETs on passenger cars in China during 2010–2030 is about 2698.8 Mt, but only 4% is cost-effective. The EETs with low emissions abatement costs are mainly available in the spark ignition (SI), diesel, and hybrid electric vehicle (HEV) paths on the taxis and high-performance cars, and also in the transmission, vehicle body and SI technologies on the private cars, which could be promoted at present. The technologies with large emissions reduction potential are mainly available in the plug-in hybrid electric vehicle (PHEV) and electric vehicle (EV) paths, which would be the main channels for reducing carbon emissions in the long run.

  19. Radiation safety of crew and passengers of air transportation in civil aviation. Provisional standards

    Science.gov (United States)

    Aksenov, A. F.; Burnazyan, A. I.

    1985-01-01

    The purpose and application of the provisional standards for radiation safety of crew and passengers in civil aviation are given. The radiation effect of cosmic radiation in flight on civil aviation air transport is described. Standard levels of radiation and conditions of radiation safety are discussed.

  20. Optimization of a passenger railway transportation plan considering mobility flows and service quality

    NARCIS (Netherlands)

    Brethome, L.; Bouvet-Agnelli, C.; Chevrier, R.; van Oort, N.; Rodriguez, J

    2017-01-01

    This research focuses on designing transportation plan for SNCF Transilien (French rail-way operator for the Parisian suburban mass transit). The objective is to develop methods and decision support tools to propose a timetable adapted to the passenger demand in the Parisian mass transit system,

  1. Carbon emission allowance allocation with a mixed mechanism in air passenger transport.

    Science.gov (United States)

    Qiu, Rui; Xu, Jiuping; Zeng, Ziqiang

    2017-09-15

    Air passenger transport carbon emissions have become a great challenge for both governments and airlines because of rapid developments in the aviation industry in recent decades. In this paper, a mixed mechanism composed of a cap-and-trade mechanism and a carbon tax mechanism is developed to assist governments in allocating carbon emission allowances to airlines operating on the routes. Combined this mixed mechanism with an equilibrium strategy, a bi-level multi-objective model is proposed for an air passenger transport carbon emission allowance allocation problem, in which a government is considered as a leader and the airlines as the followers. An interactive solution approach integrating a genetic algorithm and an interactive evolutionary mechanism is designed to search for satisfactory solutions of the proposed model. A case study is then presented to show its practicality and efficiency in mitigating carbon emissions. Sensitivity analyses under different tradable and taxable levels are also conducted, which can give the government insights as to the tradeoffs between lowering carbon intensity and improving airlines' operations. The computational results demonstrate that the mixed mechanism can assist greatly in carbon emission mitigation for air passenger transport and therefore, it should be established as part of air passenger transport carbon emission policies. Copyright © 2017 Elsevier Ltd. All rights reserved.

  2. The Research of China's Civil Aviation Passenger Multi-Channel Service Technology Platform

    Science.gov (United States)

    Zhibing, Xue; Xinming, Wang

    IATA is promoting Simplifying the Business. The traditional passenger services and business process, such as ticketing, airport counters, had a great influence. The airlines have the passenger service and convenience as the next product development requirements. With civil aviation industry and their company's products construction, the authors propose a solution of passenger multi-channel service product platform. The solution is to streamline the business as the breakthrough point, around the convenience of passengers travel services to travelers as the center, using the current mainstream and the latest IT technology to establish passenger service product platform. The solution will promote DCS e-ticketing business development and service channel diversity. In this paper, the research results have been applied in the product platform construction of the authors' company. The practice shows that through traditional business with the latest IT technologies, traditional passenger services into the emerging service model, passenger service product platform has strong advantages and characteristics. Based on the platform, various types of service products is growing rapidly.

  3. Passenger transport and CO 2 emissions: What does the French transport survey tell us?

    Science.gov (United States)

    Nicolas, Jean-Pierre; David, Damien

    The aim of this article is to analyse CO 2 emissions caused by passenger transport in France: which socio-demographic groups travel, for what kinds of journey (local or long distance), how and why? Research focusing on the analysis of individual travel can improve the understanding of CO 2 emissions by identifying upstream socio-economic factors, and also enable a better assessment of the potential social impact of measures introduced to limit greenhouse gases due to transport. Calculations are based on the latest French national transport survey (1994). Distances covered and CO 2 emissions were estimated for each journey and for each surveyed individual. A socio-demographic characteristic typology was built and results were obtained through this analysis. If equity and accessibility issues are to be taken into account, planned policies cannot be of the same type if linked to mobility segments. An environmental tax system to limit CO 2 emission increases appears appropriate for long-distance trips. Results are more varied for local journeys, which are often more of a necessity. Nevertheless, income brackets, and measures concerning urban planning or the growth of new car fleets, seem more pertinent.

  4. Individual Travel Behavior Modeling of Public Transport Passenger Based on Graph Construction

    OpenAIRE

    Quan Liang; Jiancheng Weng; Wei Zhou; Selene Baez Santamaria; Jianming Ma; Jian Rong

    2018-01-01

    This paper presents a novel method for mining the individual travel behavior regularity of different public transport passengers through constructing travel behavior graph based model. The individual travel behavior graph is developed to represent spatial positions, time distributions, and travel routes and further forecasts the public transport passenger’s behavior choice. The proposed travel behavior graph is composed of macronodes, arcs, and transfer probability. Each macronode corresponds...

  5. 03. Disruption Management in PassengerTransportation - from Air to Tracks

    OpenAIRE

    Clausen, Jens

    2007-01-01

    Over the last 10 years there has been a tremendous growth in air transportation of passengers. Both airports and airspace are close to saturation with respect to capacity, leading to delays caused by disruptions. At the same time the amount of vehicular traffic around and in all larger cities of the world has show a dramatic increase as well. Public transportation by e.g. rail has come into focus, and hence also the service level provided by suppliers ad public transportatio...

  6. Energy saving and CO2 mitigation through restructuring Jordan's transportation sector: The diesel passenger cars scenario

    International Nuclear Information System (INIS)

    Al-Hinti, I.; Al-Ghandoor, A.; Akash, B.; Abu-Nada, E.

    2007-01-01

    The transportation sector is responsible for 37% of the total final energy consumption in Jordan, with passenger cars taking a share of 57% in this sector. Improvement of the energy efficiency of the transportation sector can help in alleviating socio-economic pressures resulting from the inflating fuel bill and in lowering the relatively high CO 2 emission intensity. Current legislations mandate that all passenger cars operating in Jordan are to be powered with spark ignition engines using gasoline fuel. This paper examines potential benefits that can be achieved through the introduction of diesel cars to the passenger cars market in Jordan. Three scenarios are suggested for implementation and investigated with a forecasting model on the basis of local and global trends over the period 2007-2027. It is demonstrated that introducing diesel passenger cars can slow down the growth of energy consumption in the transportation sector resulting in significant savings in the national fuel bill. It is also shown that this is an effective and feasible option for cutting down CO 2 emissions

  7. Marketing Research on Passenger Satisfaction With Public Transport Service in the City of Belgrade

    Directory of Open Access Journals (Sweden)

    Branislav Radnović

    2015-03-01

    Full Text Available The aim of this paper is to determine, based on conducted marketing research, the level of passenger satisfaction with public transport services for the purpose of making better marketing decisions in the example of the City of Belgrade. The main task is to test the hypothesis on the existence of significant influence of factors, such as quality service, attitude and behaviour of employees (e.g. driver, adequate informing, quality of vehicles, line routes and timetable, on passenger satisfaction. Correlation coefficient and regression analysis were used for interpreting the obtained results and examining the formulated hypothesis. Empirical research has shown that there is a significant correlation between the aforementioned factors and passenger satisfaction with public transport services. The obtained results provided recommendations and guidelines for improving and increasing the quality of public transport services. The research results also provide the basis for future research that could examine the relationship between passenger satisfaction with services and sub-groups within the analyzed factors.

  8. THE FUTURE OF PASSENGER AIR TRANSPORT – VERY LARGE AIRCRAFT AND OUT KEY HUMAN FACTORS AFFECTING THE OPERATION AND SAFETY OF PASSENGER AIR TRANSPORT

    Directory of Open Access Journals (Sweden)

    Petra Skolilova

    2017-12-01

    Full Text Available The article outlines some human factors affecting the operation and safety of passenger air transport given the massive increase in the use of the VLA. Decrease of the impact of the CO2 world emissions is one of the key goals for the new aircraft design. The main wave is going to reduce the burned fuel. Therefore, the eco-efficiency engines combined with reasonable economic operation of the aircraft are very important from an aviation perspective. The prediction for the year 2030 says that about 90% of people, which will use long-haul flights to fly between big cities. So, the A380 was designed exactly for this time period, with a focus on the right capacity, right operating cost and right fuel burn per seat. There is no aircraft today with better fuel burn combined with eco-efficiency per seat, than the A380. The very large aircrafts (VLAs are the future of the commercial passenger aviation. Operating cost versus safety or CO2 emissions versus increasing automation inside the new generation aircraft. Almost 80% of the world aircraft accidents are caused by human error based on wrong action, reaction or final decision of pilots, the catastrophic failures of aircraft systems, or air traffic control errors are not so frequent. So, we are at the beginning of a new age in passenger aviation and the role of the human factor is more important than ever.

  9. The Impact of Intelligent Transportation System Implementations on the Sustainable Growth of Passenger Transport in EU Regions

    Directory of Open Access Journals (Sweden)

    Ewa Stawiarska

    2018-04-01

    Full Text Available This article discusses original studies that demonstrate the relation between developed elements of the transportation network (road system density; railway system density; number of regional railway and bus connections, length of regional railway and bus connections, online accessibility to transportation services and other services related to the development of IT techniques to benefit mass transit and the regional GNP. A new development relative to preceding studies (as quoted is that the correlation coefficients calculated do not indicate any essential interrelations between elements of the transport system, or even the number of regional passenger transport services and regional GNP. A determination of the remaining data interrelations indicated the elements of the network which are considered essential to the development of mass transit, as resulting from a study carried out for the first time in 2015 for the Górnośląska-Zagłębioska Metropolis. Considering the fact that the number of railway connections has proven to be the most important determinant of the overall number of passenger transport services, the second part of the article presents studies that focus on the modeling of the railway network, applying the graph theory (extensively applied for ITS. Selected optimized models were analyzed and assessed in terms of possible implementability of specific improvements and the resultant growth in the number of passenger transport services. The research method applied was not novel, but the conclusions drawn from it were surprising, as they indicated that an optimized network of railway connections would not cause any significant increase in the number of passenger transport services. Successive surveys (supplementing statistical analyses have confirmed the importance of ITS in increasing the share of mass transit in overall transit. (1 The study was carried out in Polish regions, with particular emphasis on Silesia. (2 Its

  10. Markets and system developments in rail-guided passenger transport

    Energy Technology Data Exchange (ETDEWEB)

    Koch, Guenter [DB International GmbH, Karlsruhe (Germany); Grein, Ottmar [DB International GmbH, Frankfurt am Main (Germany)

    2013-03-01

    The way people are transported is an ever-changing process - and that applies to the railway systems too. If anything, this process of change has sped up in recent years. The authors of this report present an overview of the markets for rail-guided forms of transport and the various systems that exist. (orig.)

  11. Some issues of logistics management applied to the passenger transportation process on suburban routes

    Directory of Open Access Journals (Sweden)

    Тetyana М. Grigorova

    2014-12-01

    Full Text Available Considered are some questions that address the problem of logistic management of suburban transport services. Using the logistic approach to the passenger transportation process management we get possibility to determine the need for consideration of the transport process parameters’ impact on the passengers’ fatigability that affects their productivity in the workplace. Basing on the analysis of the results obtained in-field, we implemented a mathematical description of the functional link between the passenger’s regulatory systems activity index, and the negatively affecting factors. It is revealed that the change in the passenger’s regulatory systems activity index on approaching the suburban line terminal station is described with sufficient accuracy by a non-linear regression equation, which includes as variables the regulatory systems activity index value before approaching to the station, the age of the passenger, the pedestrian walking pace, the time of approaching to the stop station.

  12. Individual Travel Behavior Modeling of Public Transport Passenger Based on Graph Construction

    Directory of Open Access Journals (Sweden)

    Quan Liang

    2018-01-01

    Full Text Available This paper presents a novel method for mining the individual travel behavior regularity of different public transport passengers through constructing travel behavior graph based model. The individual travel behavior graph is developed to represent spatial positions, time distributions, and travel routes and further forecasts the public transport passenger’s behavior choice. The proposed travel behavior graph is composed of macronodes, arcs, and transfer probability. Each macronode corresponds to a travel association map and represents a travel behavior. A travel association map also contains its own nodes. The nodes of a travel association map are created when the processed travel chain data shows significant change. Thus, each node of three layers represents a significant change of spatial travel positions, travel time, and routes, respectively. Since a travel association map represents a travel behavior, the graph can be considered a sequence of travel behaviors. Through integrating travel association map and calculating the probabilities of the arcs, it is possible to construct a unique travel behavior graph for each passenger. The data used in this study are multimode data matched by certain rules based on the data of public transport smart card transactions and network features. The case study results show that graph based method to model the individual travel behavior of public transport passengers is effective and feasible. Travel behavior graphs support customized public transport travel characteristics analysis and demand prediction.

  13. 29 CFR 500.104 - Department of Labor standards for passenger automobiles and station wagons and transportation of...

    Science.gov (United States)

    2010-07-01

    ... holding on an incline. Brake systems shall be free of leaks. (c) Tires. Tires shall have at least 2/32... 29 Labor 3 2010-07-01 2010-07-01 false Department of Labor standards for passenger automobiles and... of Labor standards for passenger automobiles and station wagons and transportation of seventy-five...

  14. Statistical analysis of passenger-crowding in bus transport network of Harbin

    Science.gov (United States)

    Hu, Baoyu; Feng, Shumin; Li, Jinyang; Zhao, Hu

    2018-01-01

    Passenger flow data is indispensable but rare in the study of public transport networks. In this study, we focus on the passenger-crowding characteristics of the bus transport network of Harbin (BTN-H) based on passenger flow investigation. The three frequency histograms for all the uplinks and downlinks in Harbin are presented, including passengers on the bus at each section, crowding coefficients, and position parameters of crowded sections. The differences in crowding position are analyzed on each route. The distributions of degree and crowding degree (in directed space L) follow an exponential law. The new finding indicates that there are many stations with few crowded sections and a few stations with many crowded sections. The distributions of path length and crowded length (in directed space P) are presented based on the minimum transfer times, and it is found that they can be fitted by a composite Gaussian function and a Gaussian function, respectively. The stations and paths can be divided into three crowd levels. We conclude that BTN-H is crowded from a network-based perspective.

  15. CONCERNING THE PROBLEM OF SEMANTIC CONTRADICTIONS ARISING WHEN USING THE TERMS “INTERMODAL” AND “MULTIMODAL” PASSENGER CARRIAGES

    Directory of Open Access Journals (Sweden)

    Norayr Oganesovich Bludyan

    2017-05-01

    Full Text Available This article examines Russian and foreign regulatory documents, concerning the issues of intermodal/multimodal passenger carriages, shows the essence of intermodal transportation in passenger transport, includes the analysis of various approaches to the concepts of “intermodal passenger transportations” and “multimodal passenger transportations” and contains proposals for legislative consolidation of the mentioned terms and for the implementation of intermodal technologies in passenger transport.

  16. Simulating the impact of policy, energy prices and technological progress on the passenger car fleet in Austria-A model based analysis 2010-2050

    International Nuclear Information System (INIS)

    Kloess, Maximilian; Mueller, Andreas

    2011-01-01

    This paper investigates the effects of policy, fuel prices and technological progress on the Austrian passenger car fleet in terms of energy consumption and greenhouse gas (GHG) emissions. To analyse these effects a simulation model is used. We model the car fleet from a bottom-up perspective, with a detailed coverage of vehicle specifications and propulsion technologies. The model focuses on the technological trend toward electrified propulsion systems and their potential effects on the fleet's energy consumption and GHG emissions. To represent the impact of prices and income on the development of the fleet, we combine the fleet model with top-down demand models. We developed two scenarios for the time frame 2010-2050, using two different sets of assumptions for regulatory development and conditions of increasing fossil fuel prices and continuous technological progress in vehicle propulsion technologies. The results indicate that material cuts in energy consumption and GHG emissions can be achieved with changes to the political framework for passenger cars. Appropriate taxation of fuels and cars can stabilise demand for individual motorised transport and lead to an improvement in vehicle efficiency by fostering the adoption of efficient vehicle propulsion technologies and low carbon fuels. - Highlights: → We present a simulation model for future energy demand and greenhouse gas emissions in passenger car transport. → We develop scenarios up to 2050 assuming two different policy schemes. → Policy strongly affects energy demand and greenhouse gas emissions in passenger car transport. → Policy can slow down growth in demand for passenger car transport. → Policy can promote the diffusion of more efficient propulsion technologies and low carbon fuels.

  17. Urban passenger transport energy saving and emission reduction potential: A case study for Tianjin, China

    International Nuclear Information System (INIS)

    Peng, Binbin; Du, Huibin; Ma, Shoufeng; Fan, Ying; Broadstock, David C.

    2015-01-01

    Highlights: • Potential to reduce urban passenger transport is projected between 2010 and 2040. • Four scenarios reflecting different policy mixes are considered. • The potential for energy conservation and emission reductions are obtained. • Vehicle population regulation is most effective in energy saving and reducing overall GHG. • Emission standards are the most effective measure to reduce pollutant emissions. - Abstract: With rapid growth of the vehicle population, urban passenger transport in China is largely responsible for increases in energy consumption, greenhouse gas (GHG) emissions, and also atmospheric pollutants (NO x , CO, HC, PM). In this paper, we first develop an urban passenger transport energy saving and emission reduction potential evaluation model using the “Long Range Energy Alternatives Planning (LEAP)” tool; and then take Tianjin city as an empirical case to evaluate the reduction potential of final energy consumption, GHG emissions and pollutants emissions of Tianjin’s urban passenger transport sector between 2010 and 2040 under four scenarios, i.e. BAU (business as usual) scenario, PP (the 12th five-year plan policy) scenario, CP (comprehensive policy) scenario and HP (hybrid policy of PP and CP) scenario. The results show that due to the public transport promotion, energy consumption and CO 2 emissions in 2040 can be reduced by 22% and 22.6% in the PP scenario, compared to BAU. The largest reductions in energy consumption, CO 2 and atmospheric pollutants emissions can be achieved under CP scenario, in which vehicle population regulation is the most effective to be implemented. Emissions standard regulation is the most effective measure to reduce atmospheric pollutant emissions in all the scenarios and green energy promotion is especially effective to reduce NO x and PM

  18. Environmental and Financial Evaluation of Passenger Vehicle Technologies in Belgium

    Directory of Open Access Journals (Sweden)

    Maarten Messagie

    2013-11-01

    Full Text Available Vehicles with alternative drive trains are regarded as a promising substitute for conventional cars, considering the growing concern about oil depletion and the environmental impact of our transportation system. However, “clean” technologies will only be viable when they are cost-efficient. In this paper, the environmental impacts and the financial costs of different vehicle technologies are calculated for an average Belgian driver. Environmentally friendly vehicles are compared with conventional petrol and diesel vehicles. The assessments are done from a life cycle perspective. The effect on human health, resources and ecosystems is considered when calculating the environmental impact. The total cost of ownership (TCO model includes the purchase price, registration and road taxes, insurance, fuel or electricity cost, maintenance, tires replacement, technical control, battery leasing and battery replacement. In the presented analysis different vehicle technologies and fuels are compared (petrol, diesel, hybrid electric vehicles (HEVs, battery electric vehicles (BEVs and plug-in hybrid electric vehicles (PHEVs on their level of environmental impact and cost per kilometer. The analysis shows a lower environmental impact for electric vehicles. However, electric vehicles have a higher total cost of ownership compared to conventional vehicles, even though the fuel operating costs are significantly lower. The purchase cost of electric vehicles is highly linked to the size of the battery pack, and not to the size of the electric vehicle. This explains the relative high cost for the electric city cars and the comparable cost for the medium and premium cars.

  19. NASA Green Flight Challenge: Conceptual Design Approaches and Technologies to Enable 200 Passenger Miles per Gallon

    Science.gov (United States)

    Wells, Douglas P.

    2011-01-01

    The Green Flight Challenge is one of the National Aeronautics and Space Administration s Centennial Challenges designed to push technology and make passenger aircraft more efficient. Airliners currently average around 50 passenger-miles per gallon and this competition will push teams to greater than 200 passenger-miles per gallon. The aircraft must also fly at least 100 miles per hour for 200 miles. The total prize money for this competition is $1.65 Million. The Green Flight Challenge will be run by the Comparative Aircraft Flight Efficiency (CAFE) Foundation September 25 October 1, 2011 at Charles M. Schulz Sonoma County Airport in California. Thirteen custom aircraft were developed with electric, bio-diesel, and other bio-fuel engines. The aircraft are using various technologies to improve aerodynamic, propulsion, and structural efficiency. This paper will explore the feasibility of the rule set, competitor vehicles, design approaches, and technologies used.

  20. Energy for road passenger transport and sustainable development: assessing policies and goals interactions

    DEFF Research Database (Denmark)

    Meza, Maria Josefina Figueroa; Ribeiro, Suzana Kahn

    2013-01-01

    and sustainable development goals. Essential, uncertain and limited interactions are mapped out as a result, their overview indicates that a full reconciliation between these policies and sustainability goals is not always attainable. The careful alignment and contextual examination of interactions between...... measures and goals as exemplified in this approach can help inform practical transport energy policy that better match an agenda for sustainable development.......Development that is sustainable requires an operational, efficient and safe transportation system fueled by clean, low-carbon, secure and affordable energy. The energy used in road passenger transport enables social and economic development and is the target of interventions to fight pressing urban...

  1. The influence of territory planning and social development on strategic decisions in passenger transport development

    Directory of Open Access Journals (Sweden)

    D. Griškevičienė

    2004-10-01

    Full Text Available The main factors of space planning and social development which play an important role in making strategic decisions in passenger transportation have been analysed. A number of strategic aims based on major principles of territory transport planning have been formulated. The investigation made has shown that the operation of public transport is not closely connected with the main carcass of urban territories. This decreases the efficiency of public transport, making it less popular and competitive compared to automobiles. The creation of the strategy of public transport development for the period of its integration into the EU system requires the use of methods taking into account territory planning and social and economic development of the country. The integration of new territories into the existing transportation system, optimization of routes and the increase of transport service quality are aimed to provide higher living standards and better social and economic conditions for the inhabitants. The appropriate tactical decisions in planning the development of modern passenger transport may be made only if the harmonized and well-grounded strategic aims are defined.

  2. Transportation Costs and Subsidy Distribution Model for Urban and Suburban Public Passenger Transport

    Directory of Open Access Journals (Sweden)

    Marko Ševrović

    2015-03-01

    Full Text Available Public transport (PT subsidy provides the means to impose the optimal combination of fare and Level of Service (LoS offered to passengers. In regions where one PT operator services multiple local communities on multiple lines it becomes hard to uniformly link the actual cost of a line and thus the LoS offered, to a particular local community. This leads to possible disproportions in the overall subsidy distribution that can result in being unfair to some local communities, mainly the ones that are sparsely populated or geographically isolated. In order to extricate this problem the appropriate level of PT subsidisation according to the average values in the European cities was investigated and the current subsidy policies in Croatia were investigated. Based on this research and the hypothesis that the offered LoS must be reflected in the subsidy amount a new subsidy distribution model was established that involves a series of analytical procedures and processes. This model introduces several factors used for the calculation of the actual share in costs. Thus, the amount of subsidies for individual lines in a region can be determined based on the actual service offered to the local community, The proposed model has been tested and successfully implemented in the Dubrovnik-Neretva County in the Republic of Croatia.

  3. Heterogeneity of passenger exposure to air pollutants in public transport microenvironments

    Science.gov (United States)

    Yang, Fenhuan; Kaul, Daya; Wong, Ka Chun; Westerdahl, Dane; Sun, Li; Ho, Kin-fai; Tian, Linwei; Brimblecombe, Peter; Ning, Zhi

    2015-05-01

    Epidemiologic studies have linked human exposure to pollutants with adverse health effects. Passenger exposure in public transport systems contributes an important fraction of daily burden of air pollutants. While there is extensive literature reporting the concentrations of pollutants in public transport systems in different cities, there are few studies systematically addressing the heterogeneity of passenger exposure in different transit microenvironments, in cabins of different transit vehicles and in areas with different characteristics. The present study investigated PM2.5 (particulate matter with aerodynamic diameters smaller than 2.5 μm), black carbon (BC), ultrafine particles (UFP) and carbon monoxide (CO) pollutant concentrations in various public road transport systems in highly urbanized city of Hong Kong. Using a trolley case housing numerous portable air monitors, we conducted a total of 119 trips during the campaign. Transit microenvironments, classified as 1). busy and secondary roadside bus stops; 2). open and enclosed termini; 3). above- and under-ground Motor Rail Transport (MTR) platforms, were investigated and compared to identify the factors that may affect passenger exposures. The pollutants inside bus and MTR cabins were also investigated together with a comparison of time integrated exposure between the transit modes. Busy roadside and enclosed termini demonstrated the highest average particle concentrations while the lowest was found on the MTR platforms. Traffic-related pollutants BC, UFP and CO showed larger variations than PM2.5 across different microenvironments and areas confirming their heterogeneity in urban environments. In-cabin pollutant concentrations showed distinct patterns with BC and UFP high in diesel bus cabins and CO high in LPG bus cabins, suggesting possible self-pollution issues and/or penetration of on-road pollutants inside cabins during bus transit. The total passenger exposure along selected routes, showed bus

  4. Latest Progress in Research on the SpaceLiner High-Speed Passenger Transportation Concept

    OpenAIRE

    Sippel, Martin; van Foreest, Arnold

    2007-01-01

    A vision aimed at revolutionizing ultra-long distance travel between different points on earth could be realized by a high-speed intercontinental passenger transport using rocket based, suborbital launchers. The paper gives an overview on the latest progress in conceptual design of the DLR SpaceLiner presenting geometrical size and mass data and describing results of trajectory simulations. The rockets are based on an advanced but technically conservative approach not relying on e...

  5. Panorama 2015 - Road passenger transport policies in Europe

    International Nuclear Information System (INIS)

    Cheze, Benoit; Gastineau, Pascal

    2014-12-01

    For a long time synonymous with independence and freedom, the car and its different uses are now increasingly controlled - or even constrained - by European governments. In the most recent example, on 8 December 2014, the Mayor of Paris Anne Hidalgo stated her wish to eradicate diesel from the streets of Paris (in the next five years) to combat air pollution. Going beyond the impact of the announcement itself, this pollution prevention plan comes on top of a whole series of measures recently implemented in Europe: reduction of the speed limit, congestion charging in London and Stockholm, eco-tax in France, 'environmental bonus' for electric vehicles, etc. These different policies, which are not always clearly aligned, aim to reduce the nuisances caused by road transport without compromising mobility. This note aims to explain them by offering an overview of the main transport policies in Europe. (authors)

  6. The quality of service in passenger transport terminals

    Science.gov (United States)

    Oprea, C.; Roşca, E.; Popa, M.; Ilie, A.; Dinu, O.; Roşca, M.

    2016-11-01

    The quality of service in transport terminals is differently perceived by engineers, economists, transport operators and sociologists. The traveler's perception is nevertheless decisive. The quality of service is well connected with the inside design of terminals, with the facilities in terminals and with the provided service standards. In order to provide a high level of service, the activities taking place in the public transport terminal and the maximum travelers flow size must be carefully analyzed and dimensioned. The purpose of modelling is to find the best route for each traveler from origin (entrance) to destination (exit) through all the intermediate service points, taking into consideration the instant network conditions. In developing the model we consider the walking, the waiting and the serving time. Using a simulation program written in ARENA we determine the waiting time. For validation, the model is used to evaluate the performance level in Bucharest Basarab station. By comparing the total walking distance for the possible routes and the utility function that describes the utility of all activities from entrance to exit we can find the optimal route.

  7. Ecological Pressure of Carbon Footprint in Passenger Transport: Spatio-Temporal Changes and Regional Disparities

    Directory of Open Access Journals (Sweden)

    Fei Ma

    2018-01-01

    Full Text Available Passenger transport has become a significant producer of carbon emissions in China, thus strongly contributing to climate change. In this paper, we first propose a model of ecological pressure of the carbon footprint in passenger transport (EPcfpt. In the model, the EPcfpt values of all the provinces and autonomous regions of China are calculated and analyzed during the period of 2006–2015. For the outlier EPcfpt values of Beijing, Shanghai and Tianjin, the research areas are classified into two scenarios: the first scenario (all the provinces and autonomous regions and the second scenario (not including Beijing, Shanghai and Tianjin. The global spatial autocorrelation analysis of the first scenario shows that the EPcfpt might be randomly distributed, while it shows positive spatial autocorrelation in the second scenario. Furthermore, we carry out the local spatial autocorrelation analysis of the second scenario, and find that the low aggregation areas are the most common type and are mainly located in the west of China. Then the disparities in EPcfpt between China’s Eight Comprehensive Economic Zones are further analyzed. Finally, we put forward a number of policy recommendations in relation to the spatio-temporal changes and the regional disparities of EPcfpt in China. This study provides related references for proposing effective policy measures to reduce the ecological pressure of carbon emissions from the passenger transport sector.

  8. The effectiveness of policy on consumer choices for private road passenger transport emissions reductions in six major economies

    Science.gov (United States)

    Mercure, J.-F.; Lam, A.

    2015-06-01

    The effectiveness of fiscal policy to influence vehicle purchases for emissions reductions in private passenger road transport depends on its ability to incentivise consumers to make choices oriented towards lower emissions vehicles. However, car purchase choices are known to be strongly socially determined, and this sector is highly diverse due to significant socio-economic differences between consumer groups. Here, we present a comprehensive dataset and analysis of the structure of the 2012 private passenger vehicle fleet-years in six major economies across the World (UK, USA, China, India, Japan and Brazil) in terms of price, engine size and emissions distributions. We argue that choices and aggregate elasticities of substitution can be predicted using this data, enabling us to evaluate the effectiveness of potential fiscal and technological change policies on fleet-year emissions reductions. We provide tools to do so based on the distributive structure of prices and emissions in segments of a diverse market, both for conventional as well as unconventional engine technologies. We find that markets differ significantly between nations, and that correlations between engine sizes, emissions and prices exist strongly in some markets and not strongly in others. We furthermore find that markets for unconventional engine technologies have patchy coverages of varying levels. These findings are interpreted in terms of policy strategy.

  9. The role of transportation technologies in reducing greenhouse gas emissions

    International Nuclear Information System (INIS)

    Anon.

    1995-11-01

    The potential role of passenger transportation technologies in reducing greenhouse gas emissions was discussed. The technologies considered in the report were those that affect ground transportation of passengers and were in at least the early stages of development in 1995. They were: (1) technologies to improve the fuel efficiency of cars and light trucks, (2) alternative fuels for internal combustion engines, (3) electric hybrid vehicles, (4) advanced technology transit buses, (5) intelligent transportation systems, (6) high speed rail, and (7) bicycles. For each option, the advantages and disadvantages were described. The feasibility of establishing a high-speed rail system serving Canada's most densely populated region, the Windsor to Quebec City corridor, was discussed. Economic and environmental studies of such a proposal are underway. tabs

  10. General factors that affects the increase of population mobility and principles of optimization of high-speed passenger transportations

    OpenAIRE

    Momot, A.

    2014-01-01

    Purpose. Analyze the main factors that influence the increased mobility of the population in the transport market of Ukraine. Methods. The article uses an improved method of determining the optimal areas of high-speed passenger trains and determines the value of rational transportation of passengers in different directions of speed traffic, as well as the method of marginal income. Results. In this article we analyzed seven major factors that influence the increased mobility of the population...

  11. Traffic lanes for vehicles of mass public passenger transport on city streets

    Directory of Open Access Journals (Sweden)

    Gladović Pavle V.

    2015-01-01

    Full Text Available Some of the basic measures of regulating public mass passenger transport in a city network are the introduction and management of traffic lanes reserved for the public transportation. These traffic lanes are important for several reasons: faster moving and shorter travelling time for the vehicles, reducing operating costs, improving the safety, increasing passenger comfort, maintaining of the timetable quality, etc. In most cities, an intensive use of the public transport is concentrated in the morning and the afternoon peak period. The state of the public transport system during these periods is reflected in the crowds inside the vehicles, long vehicle queues at intersections and at bus stops, which cause congestion on the streets and result in delays of public transport vehicles. This paper provides an overview of the current situation on an example in the city of Belgrade. The capacity and the quality of service for the street surfaces reserved for the public transportation vehicles were analysed on the aforementioned example.

  12. Beyond emission targets: how to decarbonize the passenger transport sector? Results from the Deep Decarbonization Pathways Project for Transport (DDPP-T)

    International Nuclear Information System (INIS)

    2017-11-01

    Reaching the ambitious climate objective of the Paris Agreement requires decreasing significantly sectoral emissions from the transport sector. However, the ambition pledged for the transport sector under the Nationally Determined Contributions (NDCs) remains very limited. The DDPP-T analyzes Paris-compatible sectoral strategies for the passenger transport that can serve to inform the 2018 Facilitative Dialogue and the preparation of future, more ambitious, NDCs by 2020. In a context of an expected steep increase in global mobility demand, deep decarbonization will require a mix of different 'well-known' options: the rapid diffusion of low-carbon vehicles and low-carbon fuels and the modal shift towards low-carbon modes like public transport and non-motorized transport (cycling and walking). However, while crucial, these options are not 'silver bullets' that on their own meet the decarbonization challenge, given their intrinsic individual limitations. The project adopts an integrated approach of sectoral deep decarbonization strategies articulating the diffusion of low-carbon technologies with the future of mobility and all its drivers, such as the demographic and economic situation, the localization of population centers, the transport and urban planning, the lifestyles and the features of mobility services. The strategies are context-specific in order to capture different country circumstances, and consider a long-term horizon to inform the short-term conditions enabling structural changes of the transport system. Building on four country analyses (France, Japan, Mexico and the United Kingdom), this Issue Brief derives five cross-cutting messages for a deep decarbonization of the passenger transport sector. Key messages: - Deep decarbonization of the passenger transport sector requires strong actions on four pillars of transformation. Only a consistent articulation of these synergistic pillars allows an effective deep decarbonization. - Deep

  13. Passenger transport in Nigeria: Environmental and economic analysis with policy recommendations

    International Nuclear Information System (INIS)

    Gujba, H.; Mulugetta, Y.; Azapagic, A.

    2013-01-01

    This paper presents the life cycle environmental impacts and economic costs of the passenger transport sector in Nigeria for 2003–2030. Four scenarios are considered: business as usual (BAU); increased use of public transport (buses) at the expense of cars (LOWCAR) and motorcycles (LOWMC), respectively; and high economic growth with increased car ownership and decline of public transport (HICAR). The findings show that for the BAU scenario the life cycle environmental impacts double over the period, despite the assumption of increased fuel and vehicle efficiency of 35% over time. The total fuel costs at the sectoral level increase three times, from US$3.4 billion/yr in 2003 to US$9.7 billion in 2030. Increasing the use of buses would reduce the environmental impacts on average by 15–20% compared to BAU; at the same time, the total fuel costs would be 25–30% lower. If the use of cars grows much faster due to a high economic growth as in HICAR, the environmental impacts and fuel costs would increase by 16% and 26%, respectively. These results demonstrate clearly that future transport policy in Nigeria should promote and incentivise public (bus) transport as a much more environmentally and economically sustainable option than transport by cars and motorcycles. - Highlights: ► The life cycle environmental impacts of passenger transport in Nigeria estimated for 2003–2030. ► The tradeoffs between economic costs and environmental impacts discussed. ► Scenarios considered: business as usual; sustainable transport; high economic growth. ► Public transport is more sustainable than transport by cars and motorcycles. ► Ending gas flaring would improve substantially environmental, economic and social impacts

  14. Reform of refined oil product pricing mechanism and energy rebound effect for passenger transportation in China

    International Nuclear Information System (INIS)

    Lin, Boqiang; Liu, Xia

    2013-01-01

    Improving energy efficiency is the primary method adopted by the Chinese government in an effort to achieve energy conservation target in the transport sector. However, the offsetting effect of energy rebound would greatly reduce its real energy-saving potentials. We set up a Linear Approximation of the Almost Ideal Demand System Model (LA-AIDS model) to estimate the rebound effect for passenger transportation in China. Real energy conservation effect of improving energy efficiency can also be obtained in the process. The result shows that the rebound effect is approximately 107.2%. This figure signifies the existence of ‘backfire effect’, indicating that efficiency improvement in practice does not always lead to energy-saving. We conclude that one important factor leading to the rebound effect, is the refined oil pricing mechanism. China's refined oil pricing mechanism has been subjected to criticism in recent years. The results of simulation analysis show that the rebound could be reduced to approximately 90.7% if the refined oil pricing mechanism is reformed. In this regard, we suggest further reforms in the current refined oil pricing mechanism. - Highlights: ► We set up the LA-AIDS model to estimate traffic service demand for urban residents. ► The size of the rebound effect for passenger transportation in China is evaluated. ► The rebound effect for passenger transportation in China is 107.2%. ► Reform of oil pricing could reduced the rebound to 90.7%. ► Reform of oil pricing might be an effective method for mitigating rebound effect

  15. Enabling technologies for demand management: Transport

    International Nuclear Information System (INIS)

    Smith, Roderick A.

    2008-01-01

    Rising transport demand is likely to be the biggest hurdle to reducing our greenhouse gas emissions. Globally and nationally, transport is consuming an ever increasing share of our total energy use. Furthermore, the bulk of energy used in transport comes from the burning of petroleum products. This brief paper summarises options arising from the two routes to reduce energy demand in transport: improved and more efficient use of existing and possible new transport modes, and the reduction of transport demand. In both areas, the prospects in the immediate and longer-term future are hedged with difficulties. Automobiles and aircraft have improved considerably in recent decades, but future improvements are likely to be incremental. The introduction of hydrogen as a fuel is appealing, but there are technical problems to be solved. Active reduction of demand for transport will require a decoupling of the link between demand and growth in gross domestic product. Globally, this will be very difficult to achieve. Various modes of public transport exist that are efficient in terms of their energy use per passenger kilometre. But they need large investments to make them more attractive than the automobile. However, population concentration in mega-cities, allied with congestion, will make such innovation essential. Policy measures can be assisted in their implementation by new technology, but will remain politically problematic

  16. Avoiding, transforming, transitioning: pathways to sustainable low carbon passenger transport in developing countries

    DEFF Research Database (Denmark)

    Meza, Maria Josefina Figueroa; Fulton, Lewis; Tiwari, Geetam

    2013-01-01

    This review examines conditions affecting road passenger transport in developing countries that can be instrumental to building a pathway for reducing carbon emissions while concurrently meeting sustainable development goals. By contrasting present and future status of these conditions a vision...... in motorized travel are also necessary from OECD countries; the focus there is given to what level of pricing and regulatory interventions could change behavior. The articulation of detailed visions can help clarify and prioritize areas where policy efforts can have great impact. Strong actions are necessary...

  17. Oil substitution and energy conservation in passenger transport - by the use of electric multiple units

    Energy Technology Data Exchange (ETDEWEB)

    Padiyar, K P

    1983-11-01

    India's National Transport Policy of accelerating the electrification of railways to a target of 1000 route kilometers per year and phasing out diesel engines is justified because of indigenous coal for power generation and the flexibility and better performance of electric equipment. This article examines the growth of passenger traffic and the corresponding decline in rail's share of that traffic since 1950 to illustrate the urgency of pursuing rail electrification. Traffic forecasts through the year 2000 emphasize that railway capacity is not keeping pace with demand, which results in discouraging public use. 8 tables. (DCK)

  18. US Advanced Freight and Passenger MAGLEV System

    Science.gov (United States)

    Morena, John J.; Danby, Gordon; Powell, James

    1996-01-01

    Japan and Germany will operate first generation Maglev passenger systems commercially shortly after 2000 A.D. The United States Maglev systems will require sophisticated freight and passenger carrying capability. The U.S. freight market is larger than passenger transport. A proposed advanced freight and passenger Maglev Project in Brevard County Florida is described. Present Maglev systems cost 30 million dollars or more per mile. Described is an advanced third generation Maglev system with technology improvements that will result in a cost of 10 million dollars per mile.

  19. THE BRAZILIAN SUPREME COURT'S PRECEDENTS AND THE CURIOUS TAXING DIFFERENCE ON THE AIR AND INLAND PASSENGER TRANSPORT

    Directory of Open Access Journals (Sweden)

    Marciano Seabra de Godoi

    2016-07-01

    Full Text Available The study aims to the taxing of transport service provision, particularly the passenger transport, as well as the odd difference of treatment created directly by the Brazilian Supreme Court’s precedents, applying distinguished regimes for air passenger and inland. It discusses the evolution of legislation on the subject and, specially, it examines critically how the Supreme Court’s case law stood on the issue, through the judgment of many direct actions of unconstitutionality (ADI. The study considers legally inconsistent these precedents, in which is unconstitutional the tax collection over the air transport, but constitutional over the inland one.

  20. Evaluation of Alternatives for the Passenger Road Transport Sector in Europe: A Life-Cycle Assessment Approach

    Directory of Open Access Journals (Sweden)

    Filipe Paulino

    2018-01-01

    Full Text Available The road passenger transport is responsible for a large share of energy consumption and pollutants emission in Europe. Efforts have been made in the definition of new policies to reduce the environmental impacts of this sector. However, an integrated and consistent assessment of the most promising policies is required, using specific European indicators. For that matter, a life-cycle analysis was applied to the road passenger transport, for the European Union with 27 countries (EU27 in 2010, following a basket-of-products methodology and considering three main stages: production, use, and end-of-life of vehicles. Simapro 8 software was used, along with Ecoinvent 3 database and the impact assessment method International Reference Life Cycle Data System (ILCD 2011 Midpoint+. Changes in vehicle production processes, vehicle constitution, and energy sources for vehicle propulsion were analyzed. The policies resulting in a decrease in all impact categories are the use of smaller or lightweight vehicles by positively influencing use, production, and end-of-life of vehicles. The use of more recent vehicles technology or diesel vehicles show substantial reductions in, respectively, five and eight impact categories (out of 15, justifying their adoption in the European fleet. Generally, the most notorious policies compared to the actual transport paradigm, like compressed natural gas (CNG, biofuels, or electric vehicles use, show the greatest reduction in climate change (up to 46% but also a very significant rise of impacts in the categories that in the conventional basket-of-products already resulted in the worst indicators after normalization.

  1. Passengers, Information, and Disruptions

    NARCIS (Netherlands)

    E. van der Hurk (Evelien)

    2015-01-01

    markdownabstract__Abstract__ Passengers traveling in public transport generate a detailed digital track record of their journey through using automated fare collection systems and carrying mobile devices. This information on passenger behavior has only recently become available to public

  2. Rational Formations of a Metro Train Improve Its Efficiencies of Both Traction Energy Utilization and Passenger Transport

    Directory of Open Access Journals (Sweden)

    Xuesong Feng

    2013-01-01

    Full Text Available Based on simulations of passenger transports of two representative types of metro trains in China, this study analyzes efficiencies of energy consumption and passenger transport of a metro train in the effect of its target speed, formation scale (FS (i.e., length and mass of the formation, relative traction capacity (RTC (i.e., ratio of the motoring cars to all its cars, and so forth. It is found that increasing energy cost efficiency of a metro train with decreasing its target speed is evidently accelerated with reducing its RTC below 0.50 at the expense of obviously lowering its passenger transport efficiency. Moreover, if the passenger capacity of the train is sufficiently utilized, increasing its FS for the same RTC is easy to have its passenger transport efficiency improved significantly even for a meanwhile much decreased target speed with consuming energy less intensively. Therefore, metro trains in peak hours may take comparatively big FSs, relatively high target speeds, and RTCs over 0.50 to meet usually urgent and large-scale travel demands in such time. In contrast, trains in nonpeak hours ought to have small FSs, relatively low target speeds, and RTCs smaller than 0.50 for mainly avoiding energy waste.

  3. Improvement of urban passenger transport ticketing systems by deploying intelligent transport systems

    Directory of Open Access Journals (Sweden)

    G. Jakubauskas

    2006-12-01

    Full Text Available The main advantages and disadvantages of conventional and intelligent ticketing systems and possible positive outcomes when introducing intelligent transport solutions – namely smart cards or e‑ticketing instead of conventional ones (paper tickets and magnetic cards are analysed in the paper. Two ideas of creating an intelligent ticketing system in an urban public transport are scrutinized. The first is electronic ticket and related equipment, the second – e-ticket and functional areas of it. In the article analysis has also been made on practical outcomes related with introduction of smart cards and e-ticketing. Practical tests and trials as well as a subsequent implementation of electronic tickets have proved unchallenged advantages of contactless smart cards against the contact ones. Nevertheless, a new age of modern technologies calls even for more effective solutions – namely virtual-ticketing systems that might be achieved through introduction of mobile technologies. Therefore, the main focus in the paper is made on the analysis of e-ticket.

  4. REDUCING ENERGY CONSUMPTION BY PASSENGER CAR WITH USING OF NON-ELECTRICAL HYBRID DRIVE TECHNOLOGY

    Directory of Open Access Journals (Sweden)

    Tomas Skrucany

    2017-03-01

    Full Text Available Not only electrical hybrid technology is used for drivetrain of passenger cars. Also other systems using non-electrical principles (hydraulic or air pressure, mechanical energy storage can be found in current vehicles. There is a quantification of the spared energy by using a hybrid vehicle in the paper. Driving cy-cle ECE 15 was chosen as a platform for simulation of driving resistances.

  5. An instrument to measure passenger satisfaction of a public transport system

    Directory of Open Access Journals (Sweden)

    Viviane Leite Dias de Mattos

    2017-03-01

    Full Text Available This study proposes an instrument, based on fuzzy logic, to measure the satisfaction with the public transport. It is based on previous studies, expert opinion and results of two surveys conducted among the data samples of the studied population: a university community. Qualitative techniques (questionaries and interviews were used for validating content, while the construct validation uses quantitative techniques (Factor Analysis and Reliability Analysis. An experiment is also performed to define some properties of fuzzy controllers: membership function and method of defuzzification. The final instrument consists of twenty items in four dimensions, namely: service, stops/terminals, vehicle and safety. It is considered valid and reliable by the present study. It can be used as a tool to understand the satisfaction of the passengers of public transport system investigated. It can also provide subsidies for managers to improve their work quality.

  6. Emergence of criticality in the transportation passenger flow: scaling and renormalization in the Seoul bus system.

    Science.gov (United States)

    Goh, Segun; Lee, Keumsook; Choi, Moo Young; Fortin, Jean-Yves

    2014-01-01

    Social systems have recently attracted much attention, with attempts to understand social behavior with the aid of statistical mechanics applied to complex systems. Collective properties of such systems emerge from couplings between components, for example, individual persons, transportation nodes such as airports or subway stations, and administrative districts. Among various collective properties, criticality is known as a characteristic property of a complex system, which helps the systems to respond flexibly to external perturbations. This work considers the criticality of the urban transportation system entailed in the massive smart card data on the Seoul transportation network. Analyzing the passenger flow on the Seoul bus system during one week, we find explicit power-law correlations in the system, that is, power-law behavior of the strength correlation function of bus stops and verify scale invariance of the strength fluctuations. Such criticality is probed by means of the scaling and renormalization analysis of the modified gravity model applied to the system. Here a group of nearby (bare) bus stops are transformed into a (renormalized) "block stop" and the scaling relations of the network density turn out to be closely related to the fractal dimensions of the system, revealing the underlying structure. Specifically, the resulting renormalized values of the gravity exponent and of the Hill coefficient give a good description of the Seoul bus system: The former measures the characteristic dimensionality of the network whereas the latter reflects the coupling between distinct transportation modes. It is thus demonstrated that such ideas of physics as scaling and renormalization can be applied successfully to social phenomena exemplified by the passenger flow.

  7. Emergence of criticality in the transportation passenger flow: scaling and renormalization in the Seoul bus system.

    Directory of Open Access Journals (Sweden)

    Segun Goh

    Full Text Available Social systems have recently attracted much attention, with attempts to understand social behavior with the aid of statistical mechanics applied to complex systems. Collective properties of such systems emerge from couplings between components, for example, individual persons, transportation nodes such as airports or subway stations, and administrative districts. Among various collective properties, criticality is known as a characteristic property of a complex system, which helps the systems to respond flexibly to external perturbations. This work considers the criticality of the urban transportation system entailed in the massive smart card data on the Seoul transportation network. Analyzing the passenger flow on the Seoul bus system during one week, we find explicit power-law correlations in the system, that is, power-law behavior of the strength correlation function of bus stops and verify scale invariance of the strength fluctuations. Such criticality is probed by means of the scaling and renormalization analysis of the modified gravity model applied to the system. Here a group of nearby (bare bus stops are transformed into a (renormalized "block stop" and the scaling relations of the network density turn out to be closely related to the fractal dimensions of the system, revealing the underlying structure. Specifically, the resulting renormalized values of the gravity exponent and of the Hill coefficient give a good description of the Seoul bus system: The former measures the characteristic dimensionality of the network whereas the latter reflects the coupling between distinct transportation modes. It is thus demonstrated that such ideas of physics as scaling and renormalization can be applied successfully to social phenomena exemplified by the passenger flow.

  8. Next Generation Fuel Cell Technology for Passenger Cars and Buses

    OpenAIRE

    Mohrdieck, Dr.

    2009-01-01

    Daimler is presenting its latest fuel cell vehicle, the Mercedes-Benz B-Class F-CELL in 2009. Being one of the first series-produced fuel cell vehicles so far, the B-Class F-CELL will be a milestone on the road to commercialization of hydrogen-powered fuel cell vehicles. Equipped with advanced fuel cell technology it is suited for everyday operation and designed to fully meet customers´ expectations. From 2010 onwards, this zero emission vehicle is going to be operated by selected customers i...

  9. Level of service for pedestrian movement towards the performance of passenger information in public transport stations in Klang Valley

    Science.gov (United States)

    Ramli, M. Z.; Hanipah, M. H.; Lee, L. G.; Loo, K. F.; Wong, J. K.; Zawawi, M. H.; Fuad, N. F. S.

    2017-09-01

    Rapid growth in car ownership in Malaysia plays a major role to traffic congestion. Hence, public transportation is crucial to cater the residents in high-density area especially in Klang Valley. Signage information in public transport station is one of an important passenger information system. Poor placement of sign information will decrease the efficiency of passenger flow and caused congestion in the station. Passenger information system is very useful for trip planning and decision making. Therefore, it is interesting to study the performance of passenger information system in focusing the movement behavior of pedestrian at non-peak period. Thus, the study on pedestrian movement during non-peak period on weekdays and weekends in mass transit stations and bus transit stations in Klang Valley was carried out by using video observation. The observation of the pedestrian movement was made in Mass Transit Station 1 in the middle of Kuala Lumpur and Mass Transit Station 2 in southern of Kuala Lumpur. The other site was focused at Bus Transit Station 1 in Putrajaya and Bus Transit Station 2 in Kajang. Findings shown that Mass Transit Station 1 having the best facility in terms of passenger information which the level of service obtained is LOS A, while the lowest level of service which is LOS E was obtained in Bus Transit Station 2.

  10. Weasel works SA-150: Design study of a 100 to 150 passenger transport aircraft

    Science.gov (United States)

    Alkema, Kevin; Comeaux, Michael; Gilbert, Timothy; Para, Victor; Toepfer, George

    1993-01-01

    As the year 2000 rapidly approaches, the airlines are faced with an extremely competitive and environmentally restrictive marketplace. In order to survive, commercial air carriers will need to find new ways to lower their direct operating costs, increase load factors and comply with tightening federal and international constraints. The SA-150 has been designed to meet these demands by focusing on the areas of aerodynamic efficiency, an improved level of passenger comfort, and a limited application of advanced technology. The SA-150 has been optimized for a 500 nmi. mission to help the airlines meet the challenges of the short haul, quick turnaround flight. With a maximum capacity of 124 passengers, and full baggage, the SA-150 is also capable of covering a range of 1500 nmi. This additional range capability will provide the airlines with flexibility when scheduling their routes. The aircraft features a 'V' tail, fly-by-wire system and is powered by two turbofans mounted under a twelve aspect ratio wing. The SA-150 will have an initial production run of 800 units and have a purchase price of $37.7 million in 1993 dollars.

  11. Environmental assessment of passenger transportation should include infrastructure and supply chains

    International Nuclear Information System (INIS)

    Chester, Mikhail V; Horvath, Arpad

    2009-01-01

    To appropriately mitigate environmental impacts from transportation, it is necessary for decision makers to consider the life-cycle energy use and emissions. Most current decision-making relies on analysis at the tailpipe, ignoring vehicle production, infrastructure provision, and fuel production required for support. We present results of a comprehensive life-cycle energy, greenhouse gas emissions, and selected criteria air pollutant emissions inventory for automobiles, buses, trains, and airplanes in the US, including vehicles, infrastructure, fuel production, and supply chains. We find that total life-cycle energy inputs and greenhouse gas emissions contribute an additional 63% for onroad, 155% for rail, and 31% for air systems over vehicle tailpipe operation. Inventorying criteria air pollutants shows that vehicle non-operational components often dominate total emissions. Life-cycle criteria air pollutant emissions are between 1.1 and 800 times larger than vehicle operation. Ranges in passenger occupancy can easily change the relative performance of modes.

  12. 41 CFR 301-73.201 - What method of payment may be used for contract passenger transportation service?

    Science.gov (United States)

    2010-07-01

    ... Contracts and Property Management Federal Travel Regulation System TEMPORARY DUTY (TDY) TRAVEL ALLOWANCES AGENCY RESPONSIBILITIES 73-TRAVEL PROGRAMS Contract Passenger Transportation Services § 301-73.201 What... contractor-issued travel charge card(s), or your agency centrally billed or other established account, or a...

  13. International Passenger and Freight Report

    Data.gov (United States)

    Department of Transportation — The International Passenger and Freight report is a summarization of all passengers and all freight transported between the U.S. and foreign countries combined, with...

  14. The Local-Level Management of Climate Change: the Case of Urban Passenger Transportation in France

    International Nuclear Information System (INIS)

    Cochran, Ian Thomas

    2012-01-01

    The reduction of GHG emissions is one of the largest and most pressing collective-action problems facing humanity. Addressing this transversal, trans-boundary policy challenge requires action at multiple scales of governance: from behavioral changes by individuals to modifications of local, national and international regulatory frameworks and decision-making processes. Taking an interdisciplinary approach, this project draws on theories on collective action, institutional economics, multilevel governance, and indicators in decision making to analyze what appears to be an increasingly poly-centric governance approach to achieving cross-scale action on GHG mitigation. This dissertation addresses the over-arching question of what governance changes are needed to deliver lasting GHG emissions reductions in the urban passenger transport sector in France? This analysis suggests that achieving greenhouse gas mitigation is dependent not only on the ability of actors to coordinate action, but also on the information tools needed to integrate these issues into decision-making at multiple levels of government and across policy priorities. Thus, GHG mitigation must be linked as an often-complementary issue with existing policy priorities. The findings resulting from this dissertation have a number of contributions to make both to the theoretical literature as well as to general policy practice and the specific decision-making process in France in terms of transport, urban planning and climate governance. (author)

  15. Logistic system as an essential element of modern organization of railway passenger traffic

    Directory of Open Access Journals (Sweden)

    O.A. Khodoskina

    2012-04-01

    Full Text Available The role and place of passenger transport services in the modern structure of rail transportation is considered. The need for approach to rail passenger transport as a logistics system, which is characterized by a set of parameters corresponding to the concept of logistics system in general and taking into account the peculiarities of railway passenger transportation is determined. The features of formation of such a system, taking into account the generally accepted theoretical approach and the specifics of rail transport are also presented. The concept of logistic system for railway vehicles is given; its overall structure is reviewed. The structure of the particular transport is defined by rail freight and in passenger traffic. Is an example of a mathematical model of the logistics system of rail passenger services on the basis of sets of incoming and outgoing parameters is determined. The structure of technologic process for goods and passenger transportation by rail from the perspective of logistics is characterized.

  16. Developing pathways to low carbon land-based passenger transport in Great Britain by 2050

    International Nuclear Information System (INIS)

    Bristow, Abigail L.; Tight, Miles; Pridmore, Alison; May, Anthony D.

    2008-01-01

    The key aim of this paper is to examine strategic pathways to low carbon personal transport in Britain and to compare these with the current trajectory of transport policy. A 2050 baseline was established using trend information, forecasts and best evidence from the literature on response to policy intervention. A range of strategies are tested including: technological development, pricing, public transport and soft measures. We conclude that even dramatic technological advance cannot meet the more stringent targets for carbon reduction in the absence of considerable behavioural change. The most promising combinations of measures involve clear price signals to encourage both a reduction in the use of motorised transport and the development and purchase of more efficient vehicles; decarbonisation of public transport and facilitating measures to enhance access whilst reducing the need for motorised travel

  17. Sustainable passenger road transport scenarios to reduce fuel consumption, air pollutants and GHG (greenhouse gas) emissions in the Mexico City Metropolitan Area

    International Nuclear Information System (INIS)

    Chavez-Baeza, Carlos; Sheinbaum-Pardo, Claudia

    2014-01-01

    This paper presents passenger road transport scenarios that may assist the MCMA (Mexico City Metropolitan Area) in achieving lower emissions in both criteria air pollutants (CO, NO x , NMVOC (non-methane volatile organic compounds), and PM 10 ) and GHG (greenhouse gas) (CH 4 , N 2 O and CO 2 ), while also promoting better mobility and quality of life in this region. We developed a bottom-up model to estimate the historical trends of energy demand, criteria air pollutants and GHG emissions caused by passenger vehicles circulating in the Mexico City Metropolitan Area (MCMA) in order to construct a baseline scenario and two mitigation scenarios that project their impact to 2028. Mitigation scenario “eff” considers increasing fuel efficiencies and introducing new technologies for vehicle emission controls. Mitigation scenario “BRT” considers a modal shift from private car trips to a Bus Rapid Transport system. Our results show significant reductions in air pollutants and GHG emissions. Incentives and environmental regulations are needed to enable these scenarios. - Highlights: • More than 4.2 million passenger vehicles in the MCMA (Mexico City Metropolitan Area) that represent 61% of criteria pollutants and 44% of GHG (greenhouse gas) emissions. • Emissions of CO, NO x and NMVOC (non-methane volatile organic compounds) in baseline scenario decrease with respect to its 2008 value because emission standards. • Emissions of PM 10 and GHG increase in baseline scenario. • Emissions of PM 10 and GHG decrease in eff + BRT scenario from year 2020. • Additional reductions are possible with better standards for diesel vehicles and other technologies

  18. Highway Passenger Transport Based Express Parcel Service Network Design: Model and Algorithm

    Directory of Open Access Journals (Sweden)

    Yuan Jiang

    2017-01-01

    Full Text Available Highway passenger transport based express parcel service (HPTB-EPS is an emerging business that uses unutilised room of coach trunk to ship parcels between major cities. While it is reaping more and more express market, the managers are facing difficult decisions to design the service network. This paper investigates the HPTB-EPS network design problem and analyses the time-space characteristics of such network. A mixed-integer programming model is formulated integrating the service decision, frequency, and network flow distribution. To solve the model, a decomposition-based heuristic algorithm is designed by decomposing the problem as three steps: construction of service network, service path selection, and distribution of network flow. Numerical experiment using real data from our partner company demonstrates the effectiveness of our model and algorithm. We found that our solution could reduce the total cost by up to 16.3% compared to the carrier’s solution. The sensitivity analysis demonstrates the robustness and flexibility of the solutions of the model.

  19. Rail security : some actions taken to enhance passenger and freight rail security, but significant challenges remain : testimony before the Committee on Commerce, Science, and Transportation, U.S. Senate

    Science.gov (United States)

    2004-03-23

    Passenger and freight rail services are important links in the nation's transportation system. Terrorist attacks on passenger and/or freight rail services have the potential to cause widespread injury, loss of life, and economic disruption. The recen...

  20. Airline Passengers

    OpenAIRE

    Wittmer, Andreas; Hinnen, Gieri

    2016-01-01

    Airlines create value for employees, investors, governments, customers and consumers. This chapter focuses on the customers and consumers of the airline product. Airline customers, who include passengers and corporate travel providers, exert considerable market power in the air transport industry through their purchasing decisions and travel behaviour. As a purchaser of a commercial aviation product, customers are responsible for stimulating product and service innovation and their behaviour ...

  1. Passenger and freight transport perspectives for 2035. Background report for transport policy discussion; Henkiloe- ja tavaraliikenteen kehityskuva 2035. Taustaraportti liikennepoliittiseen keskusteluun

    Energy Technology Data Exchange (ETDEWEB)

    Luukkonen, T.; Maekelae, T.; Pollanen, M.; Kalenoja, H.; Mantynen, J.; Rantala, J.

    2012-07-01

    This study aims to image the perspectives for future transport on the basis of existing estimates and expert views. The results of this study offer a justified perception of how Finnish passenger and freight transport will develop up to year 2035. The study also includes six 'what if' analysis which address how six individual and important changes could affect transports. The development of population and the economy are key factors in the operating environment of passenger and freight transport. To a large extent, they determine the development of the demand for passenger and freight transport. Earlier population forecasts have underestimated population growth in Finland. Uncertainty also surrounds regional demographic development, which is connected both to the development of community structure and land use, and to time use and consumption habits associated with travel preferences. The development of the economy, which also involves considerable uncertainty, is connected to population through developments in employment and income levels, among others, while growing workplace areas also attract people and increase commuting, for example. Changing travel habits and ageing of the population influence the overall demand for passenger transport. Efforts are being made to promote walking, cycling and the use of public transport. In the future these means of transport will be supported by factors such as increased awareness of the environment and health, and concentration of population in cities. While the aim is to constrain the growth of passenger car traffic, rising income levels and travel distances in the operating environment will serve to increase passenger car traffic and the demand for long-distance train, flight and bus traffic. The supply of different transport methods and the costs of their use will, for their part, affect transport mode distribution. The development of the economy and various sectors will determine the demand for freight

  2. ON PROBABILITY FUNCTION OF TRIP ROUTE CHOICE IN PASSENGER TRANSPORT SYSTEM OF CITIES

    Directory of Open Access Journals (Sweden)

    N. Nefedof

    2014-02-01

    Full Text Available The results of statistical processing of experimental research data in Kharkiv, aimed at determining the relation between the passenger trip choice probability and the actual vehicles waiting time at bus terminals are presented.

  3. Technology Roadmaps: Biofuels for Transport

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    Biofuels could provide up to 27% of total transport fuel worldwide by 2050. The use of transport fuels from biomass, when produced sustainably, can help cut petroleum use and reduce CO2 emissions in the transport sector, especially in heavy transport. Sustainable biofuel technologies, in particular advanced biofuels, will play an important role in achieving this roadmap vision. The roadmap describes the steps necessary to realise this ambitious biofuels target; identifies key actions by different stakeholders, and the role for government policy to adopt measures needed to ensure the sustainable expansion of both conventional and advanced biofuel production.

  4. Advanced transport aircraft technology

    Energy Technology Data Exchange (ETDEWEB)

    Winblade, R L

    1980-06-01

    Various elements of the NASA aircraft energy efficiency program are described. Regarding composite structures, the development of three secondary and three medium-primary components to validate structural and fabrication technology is discussed. In laminar flow control, the design of advanced airfoils having large regions of supercritical flow with features which simplify laminarization are considered. Emphasis is placed on engine performance improvement, directed at developing advanced components to reduce fuel consumption in current production engines, and engine diagnostics aimed at identifying the sources and causes of performance deterioration in high-bypass turbofan engines. In addition, the results of propeller aerodynamic and acoustic tests have substantiated the feasibility of achieving the propeller efficiency goal of 80% and confirmed that the effect of blade sweep on reducing propeller source noise was 5-6 dB.

  5. Fuel efficiency of the Austrian passenger vehicle fleet-Analysis of trends in the technological profile and related impacts on CO2 emissions

    International Nuclear Information System (INIS)

    Meyer, I.; Wessely, S.

    2009-01-01

    This paper analyzes trends in the technological profile of the Austrian personnel vehicle fleet from 1990 to 2007. This includes the parameters of power, engine size and weight, which beyond the technological efficiency of the motor engine itself, are considered to be the main determinants of the fuel efficiency of the average car stock. Investigating the drivers of ever rising transport related greenhouse gas emissions is crucial in order to derive policies that strive towards more energy-efficient on-road passenger mobility. We focus on the efficacy of technological efficiency improvements in mitigating climate-relevant emissions from car use in light of shifting demand patterns towards bigger, heavier and more powerful cars. The analysis is descriptive in nature and based on a bottom-up database that was originally collated for the purpose of the present study. Technological data on car models, which includes tested fuel consumption, engine size, power and weight, is related to registered car stock and, in parts, to newly registered cars. From this, we obtain an original database of the Austrian passenger car fleet, i.e. information on consumer choice of specific car models, segregated by gasoline and diesel fuelled engines. Conclusions are derived for policies aimed at reducing the fossil fuel consumption of the moving vehicle fleet in order to contribute to a low carbon society.

  6. Market penetration analysis of hydrogen vehicles in Norwegian passenger transport towards 2050

    International Nuclear Information System (INIS)

    Rosenberg, Eva; Fidje, Audun; Espegren, Kari Aamodt; Stiller, Christoph; Svensson, Ann Mari; Moeller-Holst, Steffen

    2010-01-01

    The Norwegian energy system is characterized by high dependency on electricity, mainly hydro power. If the national targets to reduce emissions of greenhouse gases should be met, a substantial reduction of CO 2 emissions has to be obtained from the transport sector. This paper presents the results of the analyses of three Norwegian regions with the energy system model MARKAL during the period 2005-2050. The MARKAL models were used in connection with an infrastructure model H2INVEST. The analyses show that a transition to a hydrogen fuelled transportation sector could be feasible in the long run, and indicate that with substantial hydrogen distribution efforts, fuel cell cars can become competitive compared to other technologies both in urban (2025) and rural areas (2030). In addition, the result shows the importance of the availability of local energy resources for hydrogen production, like the advantages of location close to chemical industry or surplus of renewable electricity. (author)

  7. Improving public transportation systems with self-organization: A headway-based model and regulation of passenger alighting and boarding.

    Science.gov (United States)

    Carreón, Gustavo; Gershenson, Carlos; Pineda, Luis A

    2017-01-01

    The equal headway instability-the fact that a configuration with regular time intervals between vehicles tends to be volatile-is a common regulation problem in public transportation systems. An unsatisfactory regulation results in low efficiency and possible collapses of the service. Computational simulations have shown that self-organizing methods can regulate the headway adaptively beyond the theoretical optimum. In this work, we develop a computer simulation for metro systems fed with real data from the Mexico City Metro to test the current regulatory method with a novel self-organizing approach. The current model considers overall system's data such as minimum and maximum waiting times at stations, while the self-organizing method regulates the headway in a decentralized manner using local information such as the passenger's inflow and the positions of neighboring trains. The simulation shows that the self-organizing method improves the performance over the current one as it adapts to environmental changes at the timescale they occur. The correlation between the simulation of the current model and empirical observations carried out in the Mexico City Metro provides a base to calculate the expected performance of the self-organizing method in case it is implemented in the real system. We also performed a pilot study at the Balderas station to regulate the alighting and boarding of passengers through guide signs on platforms. The analysis of empirical data shows a delay reduction of the waiting time of trains at stations. Finally, we provide recommendations to improve public transportation systems.

  8. Impacts of privatising Britain's rail passenger services -- franchising, refranchising, and Ten Year Transport Plan targets

    OpenAIRE

    Richard D Knowles

    2004-01-01

    Britain's passenger rail services were privatised in 1996/97 to reduce public subsidies and produce customer benefits through the private sector competing for medium or long-term franchises. Private sector franchisees were committed to investment in rolling stock, services, and infrastructure and were expected to deliver more market-oriented and cost-effective services whilst subsidies decreased on an annual sliding scale. The author analyses why some franchisees have been unable to achieve t...

  9. Drivers' attitudes toward front or rear child passenger belt use and seat belt reminders at these seating positions.

    Science.gov (United States)

    Kidd, David G; McCartt, Anne T

    2014-01-01

    Passengers, especially those in rear seating positions, use seat belts less frequently than drivers. In-vehicle technology can inform drivers when their passengers are unbuckled and encourage passengers to use belts. The current study collected information about drivers' attitudes toward passenger belt use and belt reminders for front passengers and children in back seats. A national telephone survey of 1218 people 18 and older was conducted, of which 477 respondents were drivers who transport a front seat passenger at least once a week and 254 were drivers who transport an 8- to 15-year-old child in the back seat. Respondents were asked about their attitudes toward belt use by their front passengers or rear child passengers and preferences for different passenger belt reminder features. Ninety percent of drivers who regularly transport front seat passengers said that the passengers always use seat belts. Reported belt use was even higher among 8- to 15-year-old children in the back seat (97%). Among the drivers whose children do not always buckle up, about half said their child unbuckled the belt during the trip. Almost every full-time belt use driver (96%) would encourage front passengers to buckle up if not belted, compared to 57 percent of part-time belt users and nonusers. In contrast, nearly every driver who transports children in the back seat would encourage their belt use, regardless of the driver's belt use habits. Most drivers who transport front passengers wanted passenger belt reminders to encourage passengers to buckle up. Most of these drivers wanted a chime/buzzer or warning light or text display and wanted the reminder to last indefinitely. Most drivers who transport child passengers in the rear seat wanted the vehicle to indicate whether child passengers are unbuckled. A large majority of these drivers wanted notifications via a visual diagram of seating positions and belt use, a chime/buzzer, and a warning light or text display. These drivers

  10. Drivers' and conductors' views on the causes and ways of preventing workplace violence in the road passenger transport sector in Maputo City, Mozambique

    Directory of Open Access Journals (Sweden)

    Tillgren Per

    2011-10-01

    Full Text Available Abstract Background Workplace violence (WPV is an occupational health hazard in both low and high income countries. To design WPV prevention programs, prior knowledge and understanding of conditions in the targeted population are essential. This study explores and describes the views of drivers and conductors on the causes of WPV and ways of preventing it in the road passenger transport sector in Maputo City, Mozambique. Methods The design was qualitative. Participants were purposefully selected from among transport workers identified as victims of WPV in an earlier quantitative study, and with six or more years of experience in the transport sector. Data were collected in semi-structured interviews. Seven open questions covered individual views on causes of WPV and its prevention, based on the interviewees' experiences of violence while on duty. Thirty-two transport professionals were interviewed. The data were analyzed by means of qualitative content analysis. Results The triggers and causes of violence included fare evasion, disputes over revenue owing to owners, alcohol abuse, overcrowded vehicles, and unfair competition for passengers. Failures to meet passenger expectations, e.g. by-passing parts of a bus route or missing stops, were also important. There was disrespect on the part of transport workers, e.g. being rude to passengers and jumping of queues at taxi ranks, and there were also robberies. Proposals for prevention included: training for workers on conflict resolution, and for employers on passenger-transport administration; and, promoting learning among passengers and workers on how to behave when traveling collectively. Regarding control and supervision, there were expressed needs for the recording of mileage, and for the sanctioning of workers who transgress queuing rules at taxi ranks. The police or supervisors should prevent drunken passengers from getting into vehicles, and drivers should refuse to go to dangerous, secluded

  11. Transportation Technology: Rail Transport and Logistics

    Science.gov (United States)

    Lang, Aaron B.

    2011-01-01

    Transportation can simply be defined as the movement of goods, services, and people from one location to another. Without an efficient means to transport goods from place to place, the economy would be nothing like it is today. Throughout the history of the United States, American railroads have paved the way toward creating a nation of great…

  12. RF Coupling into the Fuel Tank of a Large Transport Aircraft from Intentionally Transmitting Peds in the Passenger Cabin

    Science.gov (United States)

    Nguyen, Truong X.; Dudley, Kenneth L.; Scearce, Stephen A.; Ely, Jay J.; Richardson, Robert E.; Hatfield, Michael O.

    2000-01-01

    An investigation was performed to study the potential for radio frequency (RF) power radiated from Portable Electronic Devices (PEDs) to create an arcing/sparking event within the fuel tank of a large transport aircraft. This paper describes the experimental methods used for measuring RF coupling to the fuel tank and Fuel Quantity Indication System (FQIS) wiring from PED sources located in the passenger cabin. To allow comparison of voltage/current data obtained in a laboratory chamber FQIS installation to an actual aircraft FQIS installation, aircraft fuel tank RF reverberation characteristics were also measured. Results from the measurements, along with a survey of threats from typical intentional transmitting PEDs are presented. The resulting worst-case power coupled onto fuel tank FQIS wiring is derived. The same approach can be applied to measure RF coupling into various other aircraft systems.

  13. Modelling the resilience of rail passenger transport networks affected by large-scale disruptive events : the case of HSR (high speed rail)

    NARCIS (Netherlands)

    Janic, M.

    2018-01-01

    This paper deals with modelling the dynamic resilience of rail passenger transport networks affected by large-scale disruptive events whose impacts deteriorate the networks’ planned infrastructural, operational, economic, and social-economic performances represented by the selected indicators.

  14. Transport Technologies and Policy Scenarios to 2050 (Executive Summary)

    International Nuclear Information System (INIS)

    World Energy Council

    2007-01-01

    Transport is one of the major global consumers of energy, currently representing between 20 and 25 percent of aggregate energy consumption and CO 2 emissions. Strong growth in energy consumption to 2050 in all sectors, with the transport proportion projected to remain stable up to 2050. Transport therefore has an important role to lay in contributing to the primary objective of the World Energy Council: sustainable energy for all. Passenger vehicle technology is expected to remain dependent on petroleum fuels and internal combustion engines (ICE) for the foreseeable future, since these elements remain the most convenient and affordable for mass personal mobility. Enhancement of ICEs through clean diesels, hybrids and new combustion techniques will ensure increased efficiency, continuing the consistent historical annual improvement in vehicle efficiency. Policy makers must first agree on the overall objective, whether it be a reduction in energy consumption or greenhouse gas emissions. Technological development must be complemented by rational policy that will encourage and enable the technologies to emerge

  15. Novas tecnologias e mutações regulatórias nos transportes públicos municipais de passageiros: um estudo a partir do caso UBER / New technologies and regulatory changes in municipal passenger transportation: a study from the UBER case

    OpenAIRE

    Binenbojm, Gustavo; Universidade do Estado do Rio de Janeiro - UERJ

    2016-01-01

    Trabalho enviado em 16 de outubro de 2016. Aceito em 31 de outubro de 2016.DOI: 10.12957/rdc.2016.26051ResumoO presente estudo tem por objetivo analisar os efeitos disruptivos do fenômeno UBER sobre a regulação do mercado de transporte individual de passageiros, em especial o mercado de táxi. Em suma, o texto sustenta que a nova tecnologia associada a novas formas de gerenciamento criaram um novo modelo de negócios que supera, em termos de eficiência e bem-estar dos consumidores, a regulação ...

  16. Multimodal route choice models of public transport passengers in the Greater Copenhagen Area

    DEFF Research Database (Denmark)

    Anderson, Marie Karen; Nielsen, Otto Anker; Prato, Carlo Giacomo

    2014-01-01

    Understanding route choice behavior is crucial to explain travelers’ preferences and to predict traffic flows under different scenarios. A growing body of literature has concentrated on public transport users without, however, concentrating on multimodal public transport networks because......,641 public transport users in the Greater Copenhagen Area.A two-stage approach consisting of choice set generation and route choice model estimation allowed uncovering the preferences of the users of this multimodal large-scale public transport network. The results illustrate the rates of substitution...... not only of the in-vehicle times for different public transport modes, but also of the other time components (e.g., access, walking, waiting, transfer) composing the door-to-door experience of using a multimodal public transport network, differentiating by trip length and purpose, and accounting...

  17. Space Transportation Technology Workshop: Propulsion Research and Technology

    Science.gov (United States)

    2000-01-01

    This viewgraph presentation gives an overview of the Space Transportation Technology Workshop topics, including Propulsion Research and Technology (PR&T) project level organization, FY 2001 - 2006 project roadmap, points of contact, foundation technologies, auxiliary propulsion technology, PR&T Low Cost Turbo Rocket, and PR&T advanced reusable technologies RBCC test bed.

  18. Technology evaluation for time sensitive data transport

    DEFF Research Database (Denmark)

    Wessing, Henrik; Breach, Tony; Colmenero, Alberto

    . The NREN communities must provide underlying network infrastructures and transport technologies to facilitate ser-vices with such requirements to the network. In this paper we investigate and evaluate circuit and packet based transport technologies from classic best effort IP over MPLS flavours, Provider...... Backbone Bridging (PBB), “Transparent Interconnect of Lots of Links” (TRILL) to Optical Transport Network (OTN) and SDH. The transport technologies are evaluated theoreti-cally, using simulations and/or experimentally. Each transport technology is evaluated based on its performances and capabilities...... overhead and restoration time. Thirdly, complexity and automation possibilities for establishment of paths for high demanding applica-tions, and finally how the technologies are backed by research communities and major vendors like Ciena, Alcatel-Lucent, Nokia-Siemens and Huawei. The technologies...

  19. Design for air-to-air refuelling operations; new passenger and tanker aircraft design for AAR scenarios

    NARCIS (Netherlands)

    Li, M.O.

    2014-01-01

    Air-to-air refuelling is a way to improve fuel efficiency of the overall transport system without waiting for the improvement of basic aviation technology. To take full advantage of such an operation, both passenger aircraft and tanker aircraft (which deliver required fuel to the passenger aircraft

  20. Capacity, information and minority games in public transport

    NARCIS (Netherlands)

    Bouman, P.C.; Kroon, L.; Vervest, P.; Maroti, G.

    2016-01-01

    Many public transport operators are faced with high peak demands. This leads to crowded vehicles and discomfort for the passengers. The increasing availability of information technologies creates new opportunities for passengers to avoid crowding and for operators to inform passengers and reallocate

  1. 49 CFR 223.15 - Requirements for existing passenger cars.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Requirements for existing passenger cars. 223.15... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION SAFETY GLAZING STANDARDS-LOCOMOTIVES, PASSENGER CARS AND CABOOSES Specific Requirements § 223.15 Requirements for existing passenger cars. (a) Passenger cars built or...

  2. Small transport aircraft technology propeller study

    Science.gov (United States)

    Black, B. M.; Magliozzi, B.; Rohrbach, C.

    1983-01-01

    A study to define potential benefits of advanced technology propeller for 1985-1990 STAT commuter airplanes was completed. Two baselines, a Convair, 30 passenger, 0.47 Mach number airplane and a Lockheed, 50 passenger, 0.70 Mach number airplane, were selected from NASA-Ames sponsored airframe contracts. Parametric performance, noise level, weight and cost trends for propellers with varying number of blades, activity factor, camber and diameter incorporating blade sweep, tip proplets, advanced composite materials, advanced airfoils, advanced prevision synchrophasing and counter-rotation are presented. The resulting DOC, fuel burned, empty weight and acquisition cost benefits are presented for resizings of the two baseline airplanes. Six-bladed propeller having advanced composite blades, advanced airfoils, tip proplets and advanced prevision synchrophasers provided the maximum DOC improvements for both airplanes. DOC and fuel burned were reduced by 8.3% and 17.0% respectively for the Convair airplane and by 24.9% and 41.2% respectively for the Lockheed airplane. The larger reductions arose from a baseline definition with very heavy fuselage acoustic treatment. An alternate baseline, with a cabin noise 13dB in excess of the objective, was also studied.

  3. Getting passengers out : evacuation behaviours

    NARCIS (Netherlands)

    Boer, L.C.

    2003-01-01

    When disaster strikes, mass transportation means mass evacuation. The issue is especially urgent if, despite precautions, a train comes to a stop in a tunnel and there is a fire. Adequate behaviour of passengers is a major success factor of an evacuation. Passengers should replace their original

  4. New values of time and reliability in passenger transport in the Netherlands

    NARCIS (Netherlands)

    Kouwenhoven, M.; de Jong, G.; Koster, P.R.; van den Berg, V.A.C.; Verhoef, E.T.; Bates, J.; Warffemius, P.

    2014-01-01

    We have established new values of time (VOTs) and values of travel time reliability (VORs) for use in cost-benefit analysis (CBA) of transport projects in The Netherlands. This was the first national study in The Netherlands (and one of the first world-wide) to investigate these topics empirically

  5. ENVIRONMENTAL ASSESSMENT OF ROAD TRANSPORT IN A PASSENGER CAR USING THE LIFE CYCLE APPROACH

    Directory of Open Access Journals (Sweden)

    Piotr FOLĘGA

    2017-06-01

    Full Text Available Environmental issues are an increasingly important aspect of management in the transport sector; new methods have been developed for assessment of the environment in the transport sector using the life cycle approach. The paper presents the application of Well to Wheel (WTW and Life Cycle Assessment (LCA in the transport sector. The WTW method focuses on energy analysis and greenhouse gas emissions during the life cycle of fuels. WTW is used to support decision-making on the environmental aspects of transport, particularly with regard to fuel life cycle management, but this method omits important stages in the life cycle, particularly the ones regarding important circular economy guidelines such as reduction of natural resource consumption, impact on human health, etc. The LCA method provides a much broader approach to environmental assessment than WTW. LCA takes into consideration environmental impact in the whole life cycle of the vehicle, from the stage of production, through the period of exploitation, and finally its disposal.

  6. Decomposing passenger transport futures : Comparing results of global integrated assessment models

    NARCIS (Netherlands)

    Edelenbosch, O. Y.; McCollum, D. L.; van Vuuren, Detlef; Bertram, C.; Carrara, S.; Daly, H.; Fujimori, S.; Kitous, A.; Kyle, P.; Ó Broin, E.; Karkatsoulis, P.; Sano, F.

    The transport sector is growing fast in terms of energy use and accompanying greenhouse gas emissions. Integrated assessment models (IAMs) are used widely to analyze energy system transitions over a decadal time frame to help inform and evaluating international climate policy. As part of this, IAMs

  7. Technological alternatives for plutonium transport

    International Nuclear Information System (INIS)

    1978-12-01

    This paper considers alternative transport modes (air, sea, road, rail) for moving (1) plutonium from a reprocessing plant to a store or a fuel fabrication facility, and (2) MOX fuel from the latter to a reactor. These transport modes and differing forms of plutonium are considered in terms of: their proliferation resistance and safeguards; environmental and safety aspects; and economic aspects. It is tentatively proposed that the transport of plutonium could continue by air or sea where long distances are involved and by road or rail over shorter distances; this would be acceptable from the non-proliferation, environmental impact and economic aspects - there may be advantages in protection if plutonium is transported in the form of mixed oxide

  8. Modelling public transport passenger flows in the era of intelligent transport systems COST Action TU1004 (TransITs)

    CERN Document Server

    Noekel, Klaus

    2016-01-01

    This book shows how transit assignment models can be used to describe and predict the patterns of network patronage in public transport systems. It provides a fundamental technical tool that can be employed in the process of designing, implementing and evaluating measures and/or policies to improve the current state of transport systems within given financial, technical and social constraints. The book offers a unique methodological contribution to the field of transit assignment because, moving beyond “traditional” models, it describes more evolved variants that can reproduce: • intermodal networks with high- and low-frequency services; • realistic behavioural hypotheses underpinning route choice; • time dependency in frequency-based models; and • assumptions about the knowledge that users have of network conditions that are consistent with the present and future level of information that intelligent transport systems (ITS) can provide. The book also considers the practical perspective of practit...

  9. Advanced technology for future regional transport aircraft

    Science.gov (United States)

    Williams, L. J.

    1982-01-01

    In connection with a request for a report coming from a U.S. Senate committee, NASA formed a Small Transport Aircraft Technology (STAT) team in 1978. STAT was to obtain information concerning the technical improvements in commuter aircraft that would likely increase their public acceptance. Another area of study was related to questions regarding the help which could be provided by NASA's aeronautical research and development program to commuter aircraft manufacturers with respect to the solution of technical problems. Attention is given to commuter airline growth, current commuter/region aircraft and new aircraft in development, prospects for advanced technology commuter/regional transports, and potential benefits of advanced technology. A list is provided of a number of particular advances appropriate to small transport aircraft, taking into account small gas turbine engine component technology, propeller technology, three-dimensional wing-design technology, airframe aerodynamics/propulsion integration, and composite structure materials.

  10. Electric vehicles and India's low carbon passenger transport: A long-term co-benefits assessment

    DEFF Research Database (Denmark)

    Dhar, Subash; Pathak, Minal; Shukla, Priyadarshi

    2017-01-01

    Electric vehicles have attracted the attention of India's policy makers as clean technology alternatives due to their multiple advantages like higher efficiency and lower air pollution in short to medium term and reduced CO2 emissions as electricity gets decarbonized in the long-run under low...... carbon scenarios. This paper uses an energy system model ANSWER-MARKAL to analyse the role of electric vehicles (EV) in India. The modelling assessment spans the period 2010 to 2050 and analyses future EV demand in India under three scenarios: i) a ‘Reference’ scenario which includes the continuation...

  11. Space transportation propulsion USSR launcher technology, 1990

    Science.gov (United States)

    1991-01-01

    Space transportation propulsion U.S.S.R. launcher technology is discussed. The following subject areas are covered: Energia background (launch vehicle summary, Soviet launcher family) and Energia propulsion characteristics (booster propulsion, core propulsion, and growth capability).

  12. Electric vehicles and India's low carbon passenger transport: A long-term co-benefits assessment

    DEFF Research Database (Denmark)

    Dhar, Subash; Pathak, Minal; Shukla, Priyadarshi

    2017-01-01

    Electric vehicles have attracted the attention of India's policy makers as clean technology alternatives due to their multiple advantages like higher efficiency and lower air pollution in short to medium term and reduced CO2 emissions as electricity gets decarbonized in the long-run under low......) are related to sourcing of raw materials for batteries and battery reprocessing and disposal. The findings show that: i) in the reference scenario, the EVs 2-wheelers will achieve a significant share by 2050. Electric 4-wheelers though would have a small share even in 2050; ii) EV push policies though lead...... to significant diffusion of electric 2- wheelers in India by 2030. These policies enhance diffusion of electric 4-wheelers only if financial incentives are sustained in the long-term, iii) the application of global carbon price on the Indian economy in the 2° C stabilization scenario increases competitiveness...

  13. Transportation technology quick reference file

    Energy Technology Data Exchange (ETDEWEB)

    Shepherd, E.W. (ed.)

    1981-05-01

    This publication is a collection of items written by different authors on subjects relating to the transportation of radioactive materials. The purpose of the document is to meet the continuing need for information on specific subjects for dissemination to the public at their request. The subjects included were selected on the basis of the questions most often asked about radioactive materials and their transportation. Additional subjects are being considered and will be included in the future. The loose-leaf notebook format is used to facilitate the updating of this material. The data used in many of the papers represent the best available at time of publication and will be updated as more current information becomes available.

  14. Transportation technology quick reference file

    International Nuclear Information System (INIS)

    Shepherd, E.W.

    1981-05-01

    This publication is a collection of items written by different authors on subjects relating to the transportation of radioactive materials. The purpose of the document is to meet the continuing need for information on specific subjects for dissemination to the public at their request. The subjects included were selected on the basis of the questions most often asked about radioactive materials and their transportation. Additional subjects are being considered and will be included in the future. The loose-leaf notebook format is used to facilitate the updating of this material. The data used in many of the papers represent the best available at time of publication and will be updated as more current information becomes available

  15. Transportation

    National Research Council Canada - National Science Library

    Allshouse, Michael; Armstrong, Frederick Henry; Burns, Stephen; Courts, Michael; Denn, Douglas; Fortunato, Paul; Gettings, Daniel; Hansen, David; Hoffman, D. W; Jones, Robert

    2007-01-01

    .... The ability of the global transportation industry to rapidly move passengers and products from one corner of the globe to another continues to amaze even those wise to the dynamics of such operations...

  16. Sensor Technologies for Intelligent Transportation Systems.

    Science.gov (United States)

    Guerrero-Ibáñez, Juan; Zeadally, Sherali; Contreras-Castillo, Juan

    2018-04-16

    Modern society faces serious problems with transportation systems, including but not limited to traffic congestion, safety, and pollution. Information communication technologies have gained increasing attention and importance in modern transportation systems. Automotive manufacturers are developing in-vehicle sensors and their applications in different areas including safety, traffic management, and infotainment. Government institutions are implementing roadside infrastructures such as cameras and sensors to collect data about environmental and traffic conditions. By seamlessly integrating vehicles and sensing devices, their sensing and communication capabilities can be leveraged to achieve smart and intelligent transportation systems. We discuss how sensor technology can be integrated with the transportation infrastructure to achieve a sustainable Intelligent Transportation System (ITS) and how safety, traffic control and infotainment applications can benefit from multiple sensors deployed in different elements of an ITS. Finally, we discuss some of the challenges that need to be addressed to enable a fully operational and cooperative ITS environment.

  17. Sensor Technologies for Intelligent Transportation Systems

    Science.gov (United States)

    Guerrero-Ibáñez, Juan; Zeadally, Sherali

    2018-01-01

    Modern society faces serious problems with transportation systems, including but not limited to traffic congestion, safety, and pollution. Information communication technologies have gained increasing attention and importance in modern transportation systems. Automotive manufacturers are developing in-vehicle sensors and their applications in different areas including safety, traffic management, and infotainment. Government institutions are implementing roadside infrastructures such as cameras and sensors to collect data about environmental and traffic conditions. By seamlessly integrating vehicles and sensing devices, their sensing and communication capabilities can be leveraged to achieve smart and intelligent transportation systems. We discuss how sensor technology can be integrated with the transportation infrastructure to achieve a sustainable Intelligent Transportation System (ITS) and how safety, traffic control and infotainment applications can benefit from multiple sensors deployed in different elements of an ITS. Finally, we discuss some of the challenges that need to be addressed to enable a fully operational and cooperative ITS environment. PMID:29659524

  18. Sensor Technologies for Intelligent Transportation Systems

    Directory of Open Access Journals (Sweden)

    Juan Guerrero-Ibáñez

    2018-04-01

    Full Text Available Modern society faces serious problems with transportation systems, including but not limited to traffic congestion, safety, and pollution. Information communication technologies have gained increasing attention and importance in modern transportation systems. Automotive manufacturers are developing in-vehicle sensors and their applications in different areas including safety, traffic management, and infotainment. Government institutions are implementing roadside infrastructures such as cameras and sensors to collect data about environmental and traffic conditions. By seamlessly integrating vehicles and sensing devices, their sensing and communication capabilities can be leveraged to achieve smart and intelligent transportation systems. We discuss how sensor technology can be integrated with the transportation infrastructure to achieve a sustainable Intelligent Transportation System (ITS and how safety, traffic control and infotainment applications can benefit from multiple sensors deployed in different elements of an ITS. Finally, we discuss some of the challenges that need to be addressed to enable a fully operational and cooperative ITS environment.

  19. Strategic Technologies for Deep Space Transport

    Science.gov (United States)

    Litchford, Ronald J.

    2016-01-01

    Deep space transportation capability for science and exploration is fundamentally limited by available propulsion technologies. Traditional chemical systems are performance plateaued and require enormous Initial Mass in Low Earth Orbit (IMLEO) whereas solar electric propulsion systems are power limited and unable to execute rapid transits. Nuclear based propulsion and alternative energetic methods, on the other hand, represent potential avenues, perhaps the only viable avenues, to high specific power space transport evincing reduced trip time, reduced IMLEO, and expanded deep space reach. Here, key deep space transport mission capability objectives are reviewed in relation to STMD technology portfolio needs, and the advanced propulsion technology solution landscape is examined including open questions, technical challenges, and developmental prospects. Options for potential future investment across the full compliment of STMD programs are presented based on an informed awareness of complimentary activities in industry, academia, OGAs, and NASA mission directorates.

  20. Real-time passenger counting by active linear cameras

    Science.gov (United States)

    Khoudour, Louahdi; Duvieubourg, Luc; Deparis, Jean-Pierre

    1996-03-01

    The companies operating subways are very much concerned with counting the passengers traveling through their transport systems. One of the most widely used systems for counting passengers consists of a mechanical gate equipped with a counter. However, such simple systems are not able to count passengers jumping above the gates. Moreover, passengers carrying large luggage or bags may meet some difficulties when going through such gates. The ideal solution is a contact-free counting system that would bring more comfort of use for the passengers. For these reasons, we propose to use a video processing system instead of these mechanical gates. The optical sensors discussed in this paper offer several advantages including well defined detection areas, fast response time and reliable counting capability. A new technology has been developed and tested, based on linear cameras. Preliminary results show that this system is very efficient when the passengers crossing the optical gate are well separated. In other cases, such as in compact crowd conditions, reasonable accuracy has been demonstrated. These results are illustrated by means of a number of sequences shot in field conditions. It is our belief that more precise measurements could be achieved, in the case of compact crowd, by other algorithms and acquisition techniques of the line images that we are presently developing.

  1. Provisional standards of radiation safety of flight personnel and passengers in air transport of the civil aviation

    Science.gov (United States)

    1977-01-01

    Provisional standards for radiation affecting passenger aircraft are considered. Agencies responsible for seeing that the regulations are enforced are designated while radiation sources and types of radiation are defined. Standard levels of permissible radiation are given and conditions for radiation safety are discussed. Dosimetric equipment on board aircraft is delineated and regulation effective dates are given.

  2. Provisional standards of radiation safety of flight personnel and passengers in air transport of the civil aviation

    International Nuclear Information System (INIS)

    Provisional standards for radiation affecting passenger aircraft are considered. Agencies responsible for seeing that the regulations are enforced are designated while radiation sources and types of radiation are defined. Standard levels of permissible radiation are given and conditions for radiation safety are discussed. Dosimetric equipment on board aircraft is delineated and regulation effective dates are given

  3. 150 Passenger Commercial Aircraft

    Science.gov (United States)

    Bucovsky, Adrian; Romli, Fairuz I.; Rupp, Jessica

    2002-01-01

    It has been projected that the need for a short-range mid-sized, aircraft is increasing. The future strategy to decrease long-haul flights will increase the demand for short-haul flights. Since passengers prefer to meet their destinations quickly, airlines will increase the frequency of flights, which will reduce the passenger load on the aircraft. If a point-to-point flight is not possible, passengers will prefer only a one-stop short connecting flight to their final destination. A 150-passenger aircraft is an ideal vehicle for these situations. It is mid-sized aircraft and has a range of 3000 nautical miles. This type of aircraft would market U.S. domestic flights or inter-European flight routes. The objective of the design of the 150-passenger aircraft is to minimize fuel consumption. The configuration of the aircraft must be optimized. This aircraft must meet CO2 and NOx emissions standards with minimal acquisition price and operating costs. This report contains all the work that has been performed for the completion of the design of a 150 passenger commercial aircraft. The methodology used is the Technology Identification, Evaluation, and Selection (TIES) developed at Georgia Tech Aerospace Systems Design laboratory (ASDL). This is an eight-step conceptual design process to evaluate the probability of meeting the design constraints. This methodology also allows for the evaluation of new technologies to be implemented into the design. The TIES process begins with defining the problem with a need established and a market targeted. With the customer requirements set and the target values established, a baseline concept is created. Next, the design space is explored to determine the feasibility and viability of the baseline aircraft configuration. If the design is neither feasible nor viable, new technologies can be implemented to open up the feasible design space and allow for a plausible solution. After the new technologies are identified, they must be evaluated

  4. Accelerating technological change. Towards a more sustainable transport system

    NARCIS (Netherlands)

    van der Vooren, A.

    2014-01-01

    This thesis provides insights into the mechanisms of technological change by capturing the complexity that characterises the current technological transition of the transport system into existing evolutionary models of technological change. The transition towards a more sustainable transport system

  5. Transport Network Technologies – Study and Testing

    DEFF Research Database (Denmark)

    Bozorgebrahimi, K.; Channegowda, M.; Colmenero, A.

    Following on from the theoretical research into Carrier Class Transport Network Technologies (CCTNTs) documented in DJ1.1.1, this report describes the extensive testing performed by JRA1 Task 1. The tests covered EoMPLS, Ethernet OAM, Synchronous Ethernet, PBB-TE, MPLS-TP, OTN and GMPLS...

  6. Green Propulsion Technologies for Advanced Air Transports

    Science.gov (United States)

    Del Rosario, Ruben

    2015-01-01

    Air transportation is critical to U.S. and Global economic vitality. However, energy and climate issues challenge aviations ability to be sustainable in the long term. Aviation must dramatically reduce fuel use and related emissions. Energy costs to U.S. airlines nearly tripled between 1995 and 2011, and continue to be the highest percentage of operating costs. The NASA Advanced Air Transports Technology Project addresses the comprehensive challenge of enabling revolutionary energy efficiency improvements in subsonic transport aircraft combined with dramatic reductions in harmful emissions and perceived noise to facilitate sustained growth of the air transportation system. Advanced technologies and the development of unconventional aircraft systems offer the potential to achieve these improvements. The presentation will highlight the NASA vision of revolutionary systems and propulsion technologies needed to achieve these challenging goals. Specifically, the primary focus is on the N+3 generation; that is, vehicles that are three generations beyond the current state of the art, requiring mature technology solutions in the 2025-30 timeframe, which are envisioned as being powered by Hybrid Electric Propulsion Systems.

  7. Optimizing Bus Passenger Complaint Service through Big Data Analysis: Systematized Analysis for Improved Public Sector Management

    Directory of Open Access Journals (Sweden)

    Weng-Kun Liu

    2016-12-01

    Full Text Available With the advances in industry and commerce, passengers have become more accepting of environmental sustainability issues; thus, more people now choose to travel by bus. Government administration constitutes an important part of bus transportation services as the government gives the right-of-way to transportation companies allowing them to provide services. When these services are of poor quality, passengers may lodge complaints. The increase in consumer awareness and developments in wireless communication technologies have made it possible for passengers to easily and immediately submit complaints about transportation companies to government institutions, which has brought drastic changes to the supply–demand chain comprised of the public sector, transportation companies, and passengers. This study proposed the use of big data analysis technology including systematized case assignment and data visualization to improve management processes in the public sector and optimize customer complaint services. Taichung City, Taiwan, was selected as the research area. There, the customer complaint management process in public sector was improved, effectively solving such issues as station-skipping, allowing the public sector to fully grasp the service level of transportation companies, improving the sustainability of bus operations, and supporting the sustainable development of the public sector–transportation company–passenger supply chain.

  8. The prospect for modal shifts in passenger transport worldwide and impacts on energy use and CO2

    International Nuclear Information System (INIS)

    Cuenot, Francois; Fulton, Lew; Staub, John

    2012-01-01

    Travel statistics for most countries are subject to numerous uncertainties. But as presented in this paper, the IEA has developed a sufficient database to estimate passenger travel by mode for major countries and regions around the world, and produce consistent travel and energy use estimates, perhaps the first of their kind. For example, we estimate that in 2005 total global passenger travel using motorised modes was about 40 trillion kilometres, or about 6000 per person. The IEA has also developed a set of travel projections to 2050, including a Baseline and a “Modal Shift” scenario. This paper provides the result of this analysis and estimates the potential impacts on CO 2 from a 25% reduction in car and air travel by 2050 relative to the Baseline in that year. The modelling effort and policy analysis used to support the findings are also described.

  9. 49 CFR 541.5 - Requirements for passenger motor vehicles.

    Science.gov (United States)

    2010-10-01

    ... TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR VEHICLE THEFT PREVENTION STANDARD § 541.5 Requirements for passenger motor vehicles. (a) Each passenger motor vehicle subject to... 49 Transportation 6 2010-10-01 2010-10-01 false Requirements for passenger motor vehicles. 541.5...

  10. Technologies for climate change mitigation - transport sector

    Energy Technology Data Exchange (ETDEWEB)

    Salter, R.; Newman, P. (Curtin Univ. Sustainability Policy (CUSP) Institute, Perth, WA (Australia)); Dhar, S. (UNEP Risoe Centre, Roskilde (Denmark))

    2011-03-15

    The options outlined in this guidebook are designed to assist you in the process of developing transport services and facilities in your countries and localities - transport that better serves people's needs and enhances their lives while at the same time producing fewer greenhouse gas emissions. This is a new challenge, as previously improving transport generally led to increased greenhouse gases. The challenge now is to provide transport that: 1) is cheaper, more extensive and better quality 2) reduces pollution, congestion, traffic accidents and other threats to health and wellbeing 3) is accessible to all 4) supports economic development 5) reduces greenhouse emissions overall. This can be achieved if: 1) mass transit, walking and cycling are supported and encouraged, and integrated in a way that allows seamless multimodal travel, including networks of taxis, auto-rickshaws and small buses. 2) the mass transit services - including trains, buses and light-rail - are frequent, extensive, attractive, comfortable, affordable and faster than alternatives, with features like integrated ticketing and real time information accessible through mobile phones and other sources 3) private vehicle use and air travel are discouraged through pricing and other demand management measures, and through the availability of better alternative modes 4) there is support for the adoption of cleaner, lower carbon fuels and technologies and better maintenance practices for all transport modes, including private vehicles, water transport, auto-rickshaws and freight vehicles 5) the overall need for travel is reduced through the development of denser localities with more mixed land use and better access to mass transit (which reduces overall travel in ways that will be explained) 6) travel space is better managed to give higher priority to more sustainable transport modes, to promote safety, and to prevent traffic from adversely affecting residents and businesses. As you address these

  11. Technologies for climate change mitigation - transport sector

    Energy Technology Data Exchange (ETDEWEB)

    Salter, R; Newman, P [Curtin Univ. Sustainability Policy (CUSP) Institute, Perth, WA (Australia); Dhar, S [UNEP Risoe Centre, Roskilde (Denmark)

    2011-03-15

    The options outlined in this guidebook are designed to assist you in the process of developing transport services and facilities in your countries and localities - transport that better serves people's needs and enhances their lives while at the same time producing fewer greenhouse gas emissions. This is a new challenge, as previously improving transport generally led to increased greenhouse gases. The challenge now is to provide transport that: 1) is cheaper, more extensive and better quality 2) reduces pollution, congestion, traffic accidents and other threats to health and wellbeing 3) is accessible to all 4) supports economic development 5) reduces greenhouse emissions overall. This can be achieved if: 1) mass transit, walking and cycling are supported and encouraged, and integrated in a way that allows seamless multimodal travel, including networks of taxis, auto-rickshaws and small buses. 2) the mass transit services - including trains, buses and light-rail - are frequent, extensive, attractive, comfortable, affordable and faster than alternatives, with features like integrated ticketing and real time information accessible through mobile phones and other sources 3) private vehicle use and air travel are discouraged through pricing and other demand management measures, and through the availability of better alternative modes 4) there is support for the adoption of cleaner, lower carbon fuels and technologies and better maintenance practices for all transport modes, including private vehicles, water transport, auto-rickshaws and freight vehicles 5) the overall need for travel is reduced through the development of denser localities with more mixed land use and better access to mass transit (which reduces overall travel in ways that will be explained) 6) travel space is better managed to give higher priority to more sustainable transport modes, to promote safety, and to prevent traffic from adversely affecting residents and businesses. As you address these

  12. "Good Passengers and Not Good Passengers:" Adolescent Drivers' Perceptions About Inattention and Peer Passengers.

    Science.gov (United States)

    McDonald, Catherine C; Sommers, Marilyn S

    The purpose of this qualitative focus group elicitation research study was to explore teen driver perceptions of peer passengers and driver inattention. We utilized focus groups for data collection and content analysis to analyze the data, both of which were guided by the theory of planned behavior. We conducted 7 focus groups with 30 teens, ages 16-18, licensed for ≤1year to examine attitudes, perceived behavioral control, and norms related to driving inattention and peer passengers. The sample was 50% male, mean age 17.39 (SD 0.52) with mean length of licensure 173.7days (SD 109.2). Three themes emerged: 1) "Good and not good" passengers; 2) Passengers and technology as harmful and helpful; and 3) The driver is in charge. While passengers can be a source of distraction, our participants also identified passenger behaviors that reduced risk, such as assistance with technology and guidance for directions. An understanding of teens' perceptions of peer passengers can contribute to the development of effective interventions targeting teen driver inattention. Nurses are well-positioned to contribute to these teen crash prevention efforts. Copyright © 2016 Elsevier Inc. All rights reserved.

  13. Bus-stop Based Real Time Passenger Information System - Case Study Maribor

    Science.gov (United States)

    Čelan, Marko; Klemenčič, Mitja; Mrgole, Anamarija L.; Lep, Marjan

    2017-10-01

    Real time passenger information system is one of the key element of promoting public transport. For the successful implementation of real time passenger information systems, various components should be considered, such as: passenger needs and requirements, stakeholder involvement, technological solution for tracking, data transfer, etc. This article carrying out designing and evaluation of real time passenger information (RTPI) in the city of Maribor. The design phase included development of methodology for selection of appropriate macro and micro location of the real-time panel, development of a real-time passenger algorithm, definition of a technical specification, financial issues and time frame. The evaluation shows that different people have different requirements; therefore, the system should be adaptable to be used by various types of people, according to the age, the purpose of journey, experience of using public transport, etc. The average difference between perceived waiting time for a bus is 35% higher than the actual waiting time and grow with the headway increase. Experiences from Maribor have shown that the reliability of real time passenger system (from technical point of view) must be close to 100%, otherwise the system may have negative impact on passengers and may discourage the use of public transport. Among considered events of arrivals during the test period, 92% of all prediction were accurate. The cost benefit analysis has focused only on potential benefits from reduced perceived users waiting time and foreseen costs of real time information system in Maribor for 10 years’ period. Analysis shows that the optimal number for implementing real time passenger information system at the bus stops in Maribor is set on 83 bus stops (approx. 20 %) with the highest number of passenger. If we consider all entries at the chosen bus stops, the total perceived waiting time on yearly level could be decreased by about 60,000 hours.

  14. Problems and opportunities of the public organisation of passenger transport on the example of bus transport in Estonia. Reisijateveo riikliku korralduse probleemid ja võimalused Eesti bussitranspordi näitel

    Directory of Open Access Journals (Sweden)

    Jüri Sepp

    2013-01-01

    Full Text Available The purpose of the article is to show the need and opportunities for the public organisation of bus transport in Estonia. In order to achieve this goal, it is necessary to investigate Estonian and international experience in the organisation of passenger transport, its theoretical background and the resulting special measures. If we look at a specific transport service, the exclusion of the consumption thereof for a non-payer is no problem either in principle or technically. Here, public goods and market failure are not as much related to a specific transport service, but to the general availability thereof to the majority of the population. This is exactly the circumstance that the market may not necessarily guarantee. Here, the economic policy theory offers two solutions, which application in Estonian case are analysed in this article: 1 the cross-subsidisation of some lines at the expense of others, which, of course, presumes the prevention of the so-called price skimming with the establishment of regional monopolies and granting of special rights for them; 2 if cross-subsidisation cannot ensure a wide enough access to passenger transport, subsidisation must be added

  15. Advanced technologies for intelligent transportation systems

    CERN Document Server

    Picone, Marco; Amoretti, Michele; Zanichelli, Francesco; Ferrari, Gianluigi

    2015-01-01

    This book focuses on emerging technologies in the field of Intelligent Transportation Systems (ITSs) namely efficient information dissemination between vehicles, infrastructures, pedestrians and public transportation systems. It covers the state-of-the-art of Vehicular Ad-hoc Networks (VANETs), with centralized and decentralized (Peer-to-Peer) communication architectures, considering several application scenarios. With a detailed treatment of emerging communication paradigms, including cross networking  and distributed algorithms. Unlike most of the existing books, this book presents a multi-layer overview of information dissemination systems, from lower layers (MAC) to high layers (applications). All those aspects are investigated considering the use of mobile devices, such as smartphones/tablets and embedded systems, i.e. technologies that during last years completely changed the current market, the user expectations, and communication networks. The presented networking paradigms are supported and validate...

  16. Hybrid Electric Propulsion Technologies for Commercial Transports

    Science.gov (United States)

    Bowman, Cheryl; Jansen, Ralph; Jankovsky, Amy

    2016-01-01

    NASA Aeronautics Research Mission Directorate has set strategic research thrusts to address the major drivers of aviation such as growth in demand for high-speed mobility, addressing global climate and capitalizing in the convergence of technological advances. Transitioning aviation to low carbon propulsion is one of the key strategic research thrust and drives the search for alternative and greener propulsion system for advanced aircraft configurations. This work requires multidisciplinary skills coming from multiple entities. The Hybrid Gas-Electric Subproject in the Advanced Air Transportation Project is energizing the transport class landscape by accepting the technical challenge of identifying and validating a transport class aircraft with net benefit from hybrid propulsion. This highly integrated aircraft of the future will only happen if airframe expertise from NASA Langley, modeling and simulation expertise from NASA Ames, propulsion expertise from NASA Glenn, and the flight research capabilities from NASA Armstrong are brought together to leverage the rich capabilities of U.S. Industry and Academia.

  17. CLEAN HYDROGEN TECHNOLOGY FOR 3-WHEEL TRANSPORTATION IN INDIA

    Energy Technology Data Exchange (ETDEWEB)

    Krishna Sapru

    2005-11-15

    Hydrogen is a clean burning, non-polluting transportation fuel. It is also a renewable energy carrier that can be produced from non-fossil fuel resources such as solar, wind and biomass. Utilizing hydrogen as an alternative fuel for vehicles will diversify the resources of energy, and reduce dependence on oil in the transportation sector. Additionally, clean burning hydrogen fuel will also alleviate air pollution that is a very severe problem in many parts of world, especially major metropolitan areas in developing countries, such as India and China. In our efforts to foster international collaborations in the research, development, and demonstration of hydrogen technologies, through a USAID/DOE cost-shared project, Energy Conversion Devices, Inc.,(www.ovonic.com) a leading materials and alternative energy company, in collaboration with Bajaj Auto Limited, India's largest three-wheeler taxi manufacturer, has successfully developed and demonstrated prototype hydrogen ICE three-wheelers in the United States and India. ECD's proprietary Ovonic solid-state hydrogen storage technology is utilized on-board to provide a means of compact, low pressure, and safe hydrogen fuel. These prototype hydrogen three-wheelers have demonstrated comparable performance to the original CNG version of the vehicle, achieving a driving range of 130 km. The hydrogen storage system capable of storing 1 kg hydrogen can be refilled to 80% of its capacity in about 15 minutes at a pressure of 300 psi. The prototype vehicles developed under this project have been showcased and made available for test rides to the public at exhibits such as the 16th NHA annual meeting in April 2005, Washington, DC, and the SIAM (Society of Indian Automotive Manufacturers) annual conference in August 2005, New Delhi, India. Passengers have included members of the automotive industry, founders of both ECD and Bajaj, members of the World Bank, the Indian Union Minister for Finance, the President of the Asia

  18. Rural public transportation technologies : user needs and applications : final report

    Science.gov (United States)

    1998-07-01

    The Rural Public Transportation Technologies: User Needs and Applications study was conducted as part of the U.S. Department of Transportations (DOT) overall Rural Intelligent Transportation System (ITS) Program. The study examined the opportuniti...

  19. Rural Public Transportation Technologies: User Needs and Applications. Executive Summary

    Science.gov (United States)

    1998-07-01

    The Rural Public Transportation Technologies: User Needs and Applications study was conducted as part of the U.S. Department of Transportation's (DOT) overall Rural Intelligent Transportation System (ITS) Program. The study examined the opportunities...

  20. Solving public passenger transportation problems: a need for policy reorientation. [Brokerage or consumer-oriented approach needed

    Energy Technology Data Exchange (ETDEWEB)

    Davis, F.W. Jr.; Oen, K.

    1977-01-01

    Public transportation has declined because policymakers and outdated regulations have restricted the evolution of transportation systems which more closely reflect the mobility and lifestyles of today. Public policy needs to take a consumer-oriented approach to public transportation by recognizing that all consumers do not have the same transportation needs and that one or two modes of transportation cannot satisfy these needs. This report argues that if public transportation is to become an efficient method of satisfying the transportation needs of a community, a brokerage or consumer-oriented approach should be adopted. The transportation broker will match specific individual needs with a broad array of transportation services, and overcome institutional, legal, and operational barriers to the development of new forms of transportation service. 51 references or footnotes.

  1. RESEARCH ABOUT THE USERS´ PERCEPTION OF ACCOUNTING AND TAX BOOKKEEPING MODULES OF AN ERP SYSTEM FOR THE CARGO AND PASSENGERS ROAD TRANSPORTATION SECTOR

    Directory of Open Access Journals (Sweden)

    Ivam Ricardo Peleias

    2009-10-01

    Full Text Available This research evaluated the users´perception of accounting and tax bookkeeping modules of an ERP – Enterprise Resources Planning System for the cargo and passengers road transportation sector. It´s a survey research, which combined empiric investigation, bibliographical review, as well as field research. It was applied a questionnaire containing 20 questions to characterize the sample and 30 assertive ones, answered by 37 users of the system. The collected data were treated by Qualitative Analysis, Descriptive Statistics, Cluster Analysis and Comparative Analysis among the clusters. The results demonstrate how these users perceive the importance and the facilities with the use of the system, as well as grouped such users in 3 opinion clusters (optimistic, realists and pessimistic and indicated points that can be improved in the system.

  2. Innovative technology summary report: Transportable vitrification system

    International Nuclear Information System (INIS)

    1998-09-01

    At the end of the cold war, many of the Department of Energy's (DOE's) major nuclear weapons facilities refocused their efforts on finding technically sound, economic, regulatory compliant, and stakeholder acceptable treatment solutions for the legacy of mixed wastes they had produced. In particular, an advanced stabilization process that could effectively treat the large volumes of settling pond and treatment sludges was needed. Based on this need, DOE and its contractors initiated in 1993 the EM-50 sponsored development effort required to produce a deployable mixed waste vitrification system. As a consequence, the Transportable Vitrification System (TVS) effort was undertaken with the primary requirement to develop and demonstrate the technology and associated facility to effectively vitrify, for compliant disposal, the applicable mixed waste sludges and solids across the various DOE complex sites. After 4 years of development testing with both crucible and pilot-scale melters, the TVS facility was constructed by Envitco, evaluated and demonstrated with surrogates, and then successfully transported to the ORNL ETTP site and demonstrated with actual mixed wastes in the fall of 1997. This paper describes the technology, its performance, the technology applicability and alternatives, cost, regulatory and policy issues, and lessons learned

  3. Sustainable mobility. Sustainable development and the passenger transportation facilities structure in the Randstad, Netherlands; Duurzame mobiliteit. Duurzame ontwikkeling en de voorzieningenstructuur van het personenvervoer in de Randstad

    Energy Technology Data Exchange (ETDEWEB)

    Baggen, J.

    1994-06-23

    The environmental problems in the Netherlands and the necessity of a sustainable development are outlined in chapter 1. Sustainable development is situated and studied in the area of tension of environment/ecology and economy. Sustainable mobility is located in the area of tension between amenity and accessibility. In chapter 2 a conceptual framework is created to indicate ways that result in a lasting compatibility of (car)mobility with both physical environment and social-economic development. In chapter 3 instruments are chosen for the empirical part of this study: reduction of unwanted car mobility by construction of alternative infrastructure (public transport) in combination with a reduction (prevention) of mobility needs by means of physical planning. A theoretical system description of transport systems in their spatial and regional-economic context is given, resulting in a layout for present and future transport systems, based on transport mode (private and public transport), function (main route or feeder) and spatial level (from international to local). In chapter 4 spatial levels are the basis for a description and analysis of developments and policy in the fields of physical planning, transport and environment. Chapter 6 gives a description and an analysis of present facilities structures and their effects on amenity in the area of study. In chapter 7 a number of land-use scenarios for facilities structures and effects on amenity of passenger transport in future are designed for the Randstad in 2015. These scenarios are chosen on the basis of a number of factors that effect land-use planning: the exogenous effects of demographic developments and endogenous effects of physical planning on future land-use of the study area. A combination of these two factors results in four land-use scenarios. They are mainly supplemented with various configurations of housing locations on the basis of different physical planning principles. (Abstract Truncated)

  4. Cálculo de estructuras para semirremolques de pasajeros de grandes dimensiones // Calculation of structures for semi - trailers of large dimensions using in passengers transportation

    Directory of Open Access Journals (Sweden)

    L Otero Pereiro

    1998-01-01

    .____________________________________________________________________AbstractThe Finite Elements Method (FEM developed until the present time is a powerful computerized calculation system applied inthe tensions and deformations analysis of solids and structures and much literature has been published on FEM as calculationmethod,The need of solving the problems of passengers transportation, mainly in Havana City, in the difficult conditions of Cubanspecial period, conducted to the development of a semi - trailer with the necessary characteristics to fulfil this function , whichby their attributes constitutes the only one in his gender for this purpose.It is, the first time that in our country is executed the calculation of a self - potable reticulated structure of similar magnitude,with satisfactory concrete results.It is approached the creation of a physic - mathematical model that simulates the real structure, conditioned to the limitations ofthe calculation program, offering a similar behavior in the efforts and deformations that are produced, with a study of thedifferent variants of results.In the work are obtained some results on the possible consequences the calculation of the complete structure or separating it bysections, being necessary the establishment of a methodical for the definition of those sections that they can be analyzedseparately, as well as the order of importance of this analysis.It was accomplished the experimental determination of the dynamic load coefficient, as well as the establishment of the physic- mathematical model adapted for the calculation of the structure of a semi - trailer for passengers transportation applying theFinite Elements Method.It was effected a test to statics load del frame to corroborate the validity of the physic - mathematical model of the structure.Additionally, It is proposed a technical solution within the technological possibilities of the constructing company to avoid thestructure breakage of the equipment.

  5. The contribution to the greenhouse effect by passenger cars and heating is increasing

    International Nuclear Information System (INIS)

    Bouchereau, J.M.

    2000-12-01

    Between 1990 and 1998, the domestic sector contribution to the greenhouse effect increased from 25 % to 27 %. During this period, there was a 20 % rise in greenhouse gas emissions from passenger cars. These emissions amounted to 20 million tonnes of carbon equivalent out of a total of 175 million tonnes in 1998 (all sectors taken together). Carbon dioxide emissions from the tertiary sector increased by 2,3 % annually between 1980 and 1998, particularly as a result of increased road freight transport. Although technological progress has been made on fuel consumption of vehicles, greater use of passenger cars combined with decreasing running costs has led to gross emissions in France being 2 % more in 1998 than in 1990. In 1998, the transport sector (passenger cars and freight transport) was responsible for three-quarters of this increase. (author)

  6. Passenger transport modal split based on budgets and implication for energy consumption: Approach and application in China

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Shuwei; Liu, Deshun [School of Public Policy and Management (SPPM) and Institute of Energy, Environment, and Economy, Tsinghua University, Beijing 100084 (China); Jiang, Kejun [Energy Research Institute, National Development and Reform Commission, Beijing 100084 (China)

    2007-09-15

    Transport will be the strongest growing energy demand sector in the future, especially in developing countries like China, and it needs more attention. The evolution of transport structure is very important in the dynamic of transport development, and therefore worth emphasis. In this study, a modal split model maximizing spatial welfare and constrained by travel money budget and time budget is developed. This approach differs from the general econometric-based approach used in most existing macro transport studies and deals with the cost and speed of transport modes as important variables explicitly. The model is then applied to China's transport sector together with sensitivity test despite many data problems. The decomposition of energy consumption generated from bottom-up model based on this modal split identified the importance of modal split and turnover expansion in the next 30 years, which should be a stronger area of focus in transportation studies. (author)

  7. Passenger transport modal split based on budgets and implication for energy consumption: Approach and application in China

    International Nuclear Information System (INIS)

    Zhang, Shuwei; Liu, Deshun; Jiang, Kejun

    2007-01-01

    Transport will be the strongest growing energy demand sector in the future, especially in developing countries like China, and it needs more attention. The evolution of transport structure is very important in the dynamic of transport development, and therefore worth emphasis. In this study, a modal split model maximizing spatial welfare and constrained by travel money budget and time budget is developed. This approach differs from the general econometric-based approach used in most existing macro transport studies and deals with the cost and speed of transport modes as important variables explicitly. The model is then applied to China's transport sector together with sensitivity test despite many data problems. The decomposition of energy consumption generated from bottom-up model based on this modal split identified the importance of modal split and turnover expansion in the next 30 years, which should be a stronger area of focus in transportation studies. (author)

  8. Environmentally acceptable mobility in Europe: New strategies for passenger and goods transport. A contribution to ecologically compatible mobility. Documentation; Umweltgerecht mobil in Europa: Menschen und Gueter auf neuen Wegen. Ein Beitrag zur oekologisch vertraeglichen Mobilitaet. Dokumentation

    Energy Technology Data Exchange (ETDEWEB)

    Link, F.G. [Akademie fuer Natur- und Umweltschutz beim Ministerium fuer Umwelt und Verkehr des Landes Baden-Wuerttemberg, Stuttgart (Germany); Diekmann, P.; Holzwarth, J. [comps.] [Ministerium fuer Umwelt und Verkehr des Landes Baden-Wuerttemberg, Stuttgart (Germany)

    1998-11-01

    The traffic sector, with its transport systems and structures which for the most part are not ecologically acceptable, is a significant obstacle to sustainable development. As a contribution to a future-orientated, optimized consideration of both the need for mobility and the necessity of environmental protection, this volume presents big and small steps that can be taken to prevent traffic from the view of politicians, practicians and scientists in the field of passenger and goods transport. (orig.)

  9. Adaptive advisory system for economy class passenger with spinal cord injury during air travel

    NARCIS (Netherlands)

    Tan, C.F.; Chen, W.; Verbunt, M.N.C.; Bartneck, C.; Rauterberg, G.W.M.

    2009-01-01

    Today, air travel is popular as a way of transportation for different purpose such as business and tourism. The numbers of air travel passengers are increasing every year. At the same time the flight distance is increased because of better fuel efficiency and technology advancement of airplanes.

  10. 77 FR 18305 - Agency Information Collection; Activity Under OMB Review; Report of Passengers Denied Confirmed...

    Science.gov (United States)

    2012-03-27

    ... Confirmed Space--BTS Form 251 AGENCY: Research & Innovative Technology Administration (RITA), Bureau of Transportation Statistics (BTS), DOT. ACTION: Notice. SUMMARY: In compliance with the Paperwork Reduction Act of... BTS collecting reports on the number of passengers holding confirmed reservations that voluntarily or...

  11. Passenger Fee

    Data.gov (United States)

    Department of Homeland Security — TSA has implemented congressionally mandated security fees to help finance the increased cost of securing the nation's aviation transportation system. The revenue...

  12. Passenger bus industry weather information application.

    Science.gov (United States)

    2011-03-21

    Adverse weather significantly affects the United States national transportation system, including commercial companies : that rely on highways to support their enterprises. The Passenger Bus (Motorcoach) Industry (PBI) is one such affected : user who...

  13. Intercity Passenger Parametric Analysis: Overview: Maglev Analysis

    Science.gov (United States)

    1990-04-02

    This document provides information intended to clarify consideration of some of the technically-based questions which arise in connection with intercity passenger transportation, and to provide insight into the characteristics and potential roles o...

  14. 41 CFR 102-118.150 - What are the major mandatory terms and conditions governing the use of passenger transportation...

    Science.gov (United States)

    2010-07-01

    ...) Interest shall accrue from the voucher payment date on overcharges made hereunder and shall be paid at the... (Continued) FEDERAL MANAGEMENT REGULATION TRANSPORTATION 118-TRANSPORTATION PAYMENT AND AUDIT Ordering and... responsible for charges exceeding those applicable to the type, class, or character authorized in...

  15. Technology strategy for subsea processing and transport; Technology Target Areas; TTA6 - Subsea processing and transportation

    Energy Technology Data Exchange (ETDEWEB)

    2008-07-01

    OG21 (www.OG21.org) Norway's official technology strategy for the petroleum sector issued a revised strategy document in November 2005 (new strategy planned in 2009). In this document 'Subsea processing and transport' was identified as one of the eight new technology target areas (TTAs). The overall OG21 strategy document is on an aggregated level, and therefore the Board of OG21 decided that a sub-strategy for each TTA was needed. This document proposes the sub-strategy for the technology target area 'Subsea processing and transport' which covers the technology and competence necessary to effectively transport well stream to a platform or to onshore facilities. This includes multiphase flow modelling, flow assurance challenges to avoid problems with hydrates, asphaltenes and wax, subsea or downhole fluid conditioning including bulk water removal, and optionally complete water removal, and sand handling. It also covers technologies to increase recovery by pressure boosting from subsea pumping and/or subsea compression. Finally it covers technologies to facilitate subsea processing such as control systems and power supply. The vision of the Subsea processing and transport TTA is: Norway is to be the leading international knowledge- and technology cluster in subsea processing and transport: Sustain increased recovery and accelerated production on the NCS by applying subsea processing and efficient transport solutions; Enable >500 km gas/condensate multiphase well stream transport; Enable >200 km oil-dominated multiphase well stream transport; Enable well stream transport of complex fluids; Enable subsea separation, boosting compression, and water injection; Enable deepwater developments; Enable environmentally friendly and energy efficient field development. Increase the export of subsea processing and transport technology: Optimize technology from the NCS for application worldwide; Develop new technology that can meet the challenges found in

  16. THE GRAPHICAL MODELING, SIMULATION AND REALIZATION OF AN EQUIPMENT WITH OPTO-REFLECTIVE SENSORS FOR THE MANAGEMENT OF URBAN PUBLIC TRANSPORT PASSENGERS

    Directory of Open Access Journals (Sweden)

    CRIȘAN Horea George

    2015-06-01

    Full Text Available The development of an equipment capable to carry out a real-time evaluation above loading of urban buses, allows the optimization of the urban transport vehicles distribution on a network segment, reducing waiting times, the passenger crowds in buses and at the same time decreasing the need of buses maintenance, issues with direct effects on the growth of the carriers economic profit. A solution based on optical detection is one that can generate results with high accuracy in relatively low cost conditions. This advantage can be obtained only if the constructive version of the equipment is properly designed, taking into account the geometric parameters of the light slots emitted and received by the sensors. Therefore, using three-dimensional CAD modelling, it was realized an optimal constructive variant. This graphical method also allows it the viewing, variation and synchronization of sensors geometrical parameters, so in this way, the equipment can produce the desired effect. Further, it has been carried out a graphical simulation of the designed equipment function, in order to validate the obtained results. Later, the designed equipment was achieved and tested under laboratory conditions, in order to be implemented and used under real conditions, on the buses of an urban public transport operator.

  17. The seated bus passenger--a review.

    Science.gov (United States)

    Levis, J A

    1978-09-01

    The paper describes the inter-relationship of anthropometry, rig studies and dynamic testing of aspects related to problems of the seated bus passenger. It seeks to draw together sub-sections of a very large study sponsored by the government through the Transport and Road Research Laboratory and undertaken by the Human Factors Group of Leyland Truck and Bus. It is relevant to all those designing passenger carrying transport systems.

  18. Rural Public Transportation Technologies: User Needs and Applications. Final Report

    Science.gov (United States)

    1998-08-01

    The Rural Public Transportation Technologies: User Needs and Applications Study was conducted as part of the U.S. DOT's overall Rural Intelligent Transportation System (ITS) Program. The study examined the opportunities and challenges of planning and...

  19. Theoretical Analysis and Experimental Study on the Coating Removal from Passenger-Vehicle Plastics for Recycling by Using Water Jet Technology

    Science.gov (United States)

    Zhang, Hongshen; Chen, Ming

    2015-11-01

    The recovery and utilization of automotive plastics are a global concern because of the increasing number of end-of-life vehicles. In-depth studies on technologies for the removal of coatings from automotive plastics can contribute to the high value-added levels of the recycling and utilization of automotive plastic. The liquid waste generated by removing chemical paint by using traditional methods is difficult to handle and readily produces secondary pollution. Therefore, new, clean, and highly efficient techniques of paint removal must be developed. In this article, a method of coating removal from passenger-vehicle plastics was generated based on high-pressure water jet technology to facilitate the recycling of these plastics. The established technology was theoretically analyzed, numerically simulated, and experimentally studied. The high-pressure water jet equipment for the removal of automotive-plastic coatings was constructed through research and testing, and the detailed experiments on coating removal rate were performed by using this equipment. The results showed that high-pressure water jet technology can effectively remove coatings on the surfaces of passenger-vehicle plastics. The research also revealed that the coating removal rate increased as jet pressure ( P) increased and then decreased when jet moving speed ( Vn) increased. The rate decreased as the distance from nozzle to work piece ( S nw ) and the nozzle angle ( Φ) increased. The mathematical model for the rate of removal of coatings from bumper surfaces by water jet was derived based on the experiment data and can effectively predict coating removal rate under different operating conditions.

  20. Transmission Control of Transport and Technological Cars in Acceleration Mode

    Directory of Open Access Journals (Sweden)

    B. I. Plujnikov

    2015-01-01

    Full Text Available In most structures a transmission of the transport-technological machine (TTM is controlled by automatic systems. In their creating it is necessary to specify the appropriate parameters and algorithms. In the total balance of the machine run time the acceleration mode is the most important. Therefore, an algorithm of the transmission gear ratio change during acceleration largely provides desirable rating of machines.It is known that the process of acceleration is estimated by its dynamic quality and fuel economy. To reach the best rating of both simultaneously is impossible. Therefore, as the criteria of estimate, were chosen the time and fuel consumption during acceleration to a fixed speed value.From a mathematical point of view, these criteria represent the sum of integrals, each of which defines the time or the fuel consumption during acceleration with a certain transmission gear ratio. The problem is formulated as follows: to determine the speed values of the TTM at the moments when the transmission gear ratio is changed providing the minimum values during fixed fuel supply for the estimate criteria. The latter condition in a certain way limits the task, but in explicit form there is no this control action in the dependence data.Given the variety of possible design options for the TTM, the solution is given by a specific example that simplifies the mathematics and makes it easier to understand the results obtained. As a TTM, is considered a passenger car with petrol engine and automatic transmission, which includes a hydrodynamic transformer and three-speed gearbox.A chosen way of solving the problem involves using the theory of ordinary maxima and minima, which allows finding the unknown values of independent variables. The expressions of sub-integral functions are in explicit form obtained and studied for meeting the necessary and sufficient conditions for existence of the extreme point. The result was a proof that in the case of

  1. Requirements Elicitation of Passengers With Reduced Mobility for the Design of High Quality, Accessible and Inclusive Public Transport Services

    Directory of Open Access Journals (Sweden)

    Starzyńska Beata

    2015-09-01

    Full Text Available In this article the authors present the methodology adopted and the results obtained in the first stage of the research encompassing focus group interviews (FGI about the needs of public transport users in a selected city (Poznań. The elicitation and assessment of the requirements were carried out for three groups of people with disabilities using public transport in the city of Poznań: blind and partially sighted people, deaf and hearing-impaired people, as well as people with locomotor dysfunctions. A study carried out on the basis of a scenario especially designed for the FGI purpose has made it possible to identify barriers for people with disabilities and, consequently, to formulate their pre-trip,on-trip and post-trip requirements when it comes to urban public transport services. The results will be used to construct a questionnaire to be used further on in the project.

  2. The Research on Safety Management Information System of Railway Passenger Based on Risk Management Theory

    Science.gov (United States)

    Zhu, Wenmin; Jia, Yuanhua

    2018-01-01

    Based on the risk management theory and the PDCA cycle model, requirements of the railway passenger transport safety production is analyzed, and the establishment of the security risk assessment team is proposed to manage risk by FTA with Delphi from both qualitative and quantitative aspects. The safety production committee is also established to accomplish performance appraisal, which is for further ensuring the correctness of risk management results, optimizing the safety management business processes and improving risk management capabilities. The basic framework and risk information database of risk management information system of railway passenger transport safety are designed by Ajax, Web Services and SQL technologies. The system realizes functions about risk management, performance appraisal and data management, and provides an efficient and convenient information management platform for railway passenger safety manager.

  3. The role of efficiency improvements vs. price effects for modeling passenger car transport demand and energy demand—Lessons from European countries

    International Nuclear Information System (INIS)

    Ajanovic, Amela; Haas, Reinhard

    2012-01-01

    The objective of this paper is to analyze the impact of changes in fuel prices and fuel intensity (i.e. liters of fuel used per 100 kilometers) on overall fuel (gasoline and diesel) consumption and on the demand for vehicle km driven in car passenger transport. This is important for deriving effective policy portfolios consisting of fuel taxes and technical standards such as fuel intensity mandates or specific CO 2 emission limits. To extract these impacts, we apply cointegration analyses to six European countries and their aggregate over the period 1970–2007. We consider the impact of fuel prices, household income and fuel intensity on fuel consumption. Furthermore, we investigate how changes in fuel prices and fuel intensity interact, analyzing the rebound effect due to lower fuel intensity and due to the switch to diesel. Because we find a high rebound effect with 44% more km driven if fuel intensity is improved 100%, the major conclusion of our analysis for policy makers is that technical standards as the only policy instrument will have limited success. Rather we recommend increased fuel taxes along with fuel intensity standards so that the taxes compensate for the rebound due to the standards. - Highlights: ► We find a high rebound effect with 44% more km driven if fuel intensity is improved. ► Technical standards as the only policy instrument will have limited success. ► Fuel taxes accompanied to fuel intensity standards may compensate the rebound effect.

  4. Research and new technologies in transportation. Vol. 1. High-speed railway systems: Maglev technology. Forschung und neue Technologien im Verkehr. Bd. 1. Schnellbahnsysteme: Magnetbandtechnolgie

    Energy Technology Data Exchange (ETDEWEB)

    1988-01-01

    High-speed magnetic levitation technology opens up a new dimension for long-distance passenger transport with speeds ranging between ground travel and flying. The status of development and test results of the German TRANSRAPID magnetic levitation system and corresponding activities abroad will be reported on. Both the new vehicle technology of the TRANSRAPID 07 and results of application studies at home and abroad will be presented. High-speed magnetic railway technology - status and development perspectives; readiness for service, safety and reliability, application studies. The book comprises 11 papers read at the symposium on the subject of high-speed trains. 14 papers have been recorded separately in this database. (orig./HW).

  5. Applications of superconductor technologies to transportation

    Science.gov (United States)

    Rote, D. M.; Herring, J. S.; Sheahen, T. P.

    1989-06-01

    This report assesses transportation applications of superconducting devices, such as rotary motors and generators, linear synchronous motors, energy storage devices, and magnets. Among conventional vehicles, ships appear to have the greatest potential for maximizing the technical benefits of superconductivity, such as smaller, lighter, and more-efficient motors and, possibly, more-efficient generators. Smaller-scale applications include motors for pipeline pumps, all-electric and diesel-electric locomotives, self-propelled rail cars, and electric highway vehicles. For diesel-electric locomotives, superconducting units would eliminate space limitations on tractive power. Superconducting magnetic energy storage devices appear most suitable for regenerative braking or power assistance in grade climbing, rather than for long-term energy storage. With toroidal devices (especially for onboard temporary energy storage), external fields would be eliminated. With regard to new vehicle technologies, the use of superconducting devices would only marginally enhance the benefits of inductive-power-coupled vehicles over conventional electric vehicles, but could enable magnetically levitated (maglev) vehicles to obtain speeds of 520 km/h or more. This feature, together with the quiet, smooth ride, might make maglev vehicles an attractive alternative to intercity highway-vehicle or airlane trips in the range of 100 to 600 miles. Electromagnetic airport applications are not yet feasible.

  6. SpaceLiner - a Visionary Concept of an Ultra Fast Passenger Transport under Investigation in FAST20XX

    OpenAIRE

    Sippel, Martin

    2009-01-01

    A strategic vision has been proposed by DLR which ultimately has the potential to enable sustainable low-cost space transportation to orbit. The baseline idea is simple and quite conventional: Strongly surging the number of launches per year and hence dramatically shrinking manufacturing and operating cost of launcher hardware. The obvious challenge of the vision is to identify the very application creating this new, large-size market. All recent assessments of the launch business are soberin...

  7. Vulnerability effects of passengers' intermodal transfer distance preference and subway expansion on complementary urban public transportation systems

    International Nuclear Information System (INIS)

    Hong, Liu; Yan, Yongze; Ouyang, Min; Tian, Hui; He, Xiaozheng

    2017-01-01

    The vulnerability studies on urban public transportation systems have attracted growing attentions in recent years, due to their important role in the economy development of a city and the well-beings of its citizens. This paper proposes a vulnerability model of complementary urban public transportation systems (CUPTSs) composed of bus systems and subway systems, with the consideration of passengers’ intermodal transfer distance preference (PITDP) to capture different levels of complementary strength between the two systems. Based on the model, this paper further introduces a CUPTSs-aimed vulnerability analysis method from two specific aspects: (a) vulnerability effects of different PITDP values, which facilitate the design of policies to change PITDP to reduce system vulnerability; (b) vulnerability effects of different subway expansion plans, which facilitate the vulnerability investigation of current expansion plan and the identification of the optimal expansion plan from the system vulnerability perspective. The proposed CUPTSs-aimed vulnerability analysis method is applied to investigate the complementary bus and subway systems in the city of Wuhan, China. The insights from this study are helpful to analyze other CUPTSs for valuable planning suggestions from the vulnerability perspective. - Highlights: • We model complementary urban public transportation systems’ (CUPTSs) vulnerability. • We use a PITDP metric to capture different levels of complementary relationship. • We study vulnerability under different PITDP and different subway expansion plans. • We analyze dynamic vulnerability of CUPTSs during their expansion process.

  8. Transport Technologies and Policy Scenarios to 2050

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2007-10-15

    As part of the major WEC study on Scenarios to 2050, a specific investigation was undertaken on measures required in the transport sector to secure sustainable energy and sustainable mobility in the future. This report outlines the results conducted by a study group of international WEC transport experts and gives concrete policy recommendations to develop sustainable transport systems.

  9. 75 FR 24773 - Research and Innovative Technology Administration Advisory Council on Transportation Statistics...

    Science.gov (United States)

    2010-05-05

    ... DEPARTMENT OF TRANSPORTATION Bureau of Transportation Statistics Research and Innovative Technology Administration Advisory Council on Transportation Statistics; Notice of Meeting AGENCY: Research... Transportation, Research and Innovative Technology Administration, Bureau of Transportation Statistics, Attention...

  10. 2015 International Conference on Information Technology and Intelligent Transportation Systems

    CERN Document Server

    Jain, Lakhmi; Zhao, Xiangmo

    2017-01-01

    This volume includes the proceedings of the 2015 International Conference on Information Technology and Intelligent Transportation Systems (ITITS 2015) which was held in Xi’an on December 12-13, 2015. The conference provided a platform for all professionals and researchers from industry and academia to present and discuss recent advances in the field of Information Technology and Intelligent Transportation Systems. The presented information technologies are connected to intelligent transportation systems including wireless communication, computational technologies, floating car data/floating cellular data, sensing technologies, and video vehicle detection. The articles focusing on intelligent transport systems vary in the technologies applied, from basic management systems to more application systems including topics such as emergency vehicle notification systems, automatic road enforcement, collision avoidance systems and some cooperative systems. The conference hosted 12 invited speakers and over 200 part...

  11. Land Transport Emergency Response Technology Report

    International Nuclear Information System (INIS)

    DOTSON, LORI J.; PIERCE, JIM D.

    2003-01-01

    Sandia National Laboratories was tasked by the Japan Nuclear Cycle Development Institute (JNC) to provide assistance in developing an emergency response plan for radioactive material transportation activities. Those tasks included compiling radioactive materials (RAM) transportation accident data FR-om the open literature and databases, investigating emergency response plans for radioactive materials transport in the United States, and developing specific recommendations for the JNC' nuclear material transport emergency response plan, based on information gathered during the first two tasks. These recommendations include developing a RAM database, a public transparency Internet website, an emergency response inFR-astructure designed specifically for transportation needs, and a clear set of directives to provide authority in the case of transportation accidents or incidents involving RAM

  12. CONCEPTUAL APPROACHES TO CREATE CONTROL MECHANISM BY PASSENGER COMMUTATION SERVICES

    Directory of Open Access Journals (Sweden)

    V. O. Zadoya

    2010-11-01

    Full Text Available In the article the basic approaches of improving a management mechanism for passenger suburban railway transportations are considered, and the classification of reformation models for passenger suburban railway transportations depending on scales, degree of independence, department subordination and amount of proprietors of future company is offered.

  13. LEDs APPLICATION IN THE SERVICE OF URBAN PASSENGER TRANSPORT IN THE CITY OF URUAPAN MICHOACÁN

    Directory of Open Access Journals (Sweden)

    Carlos Castillo-Arevalo

    2017-07-01

    Full Text Available The use of urban transport in the city of Uruapan Michoacán and the rest of the country is essential. The bus routes are identified by labeled numbers, however in the darkness of early morning, evening or rainy day, they is difficult to identify, because of the material used (white shoes paint. Through high-brightness LEDs, displays can be built based on seven-segment digits that display the route number. Without using programmable devices it is possible to turn on/off each segment and easily get any number from 0 to 9, also it is possible to the cost of equipment and get less fragile circuits.

  14. “Good passengers and not good passengers:” Adolescent drivers’ perceptions about inattention and peer passengers

    Science.gov (United States)

    Sommers, Marilyn S.

    2016-01-01

    Purpose The purpose of this qualitative focus group elicitation research study was to explore teen driver perceptions of peer passengers and driver inattention. Design & Methods We utilized focus groups for data collection and content analysis to analyze the data, both of which were guided by the Theory of Planned Behavior. We conducted 7 focus groups with 30 teens, ages 16–18, licensed for ≤1 year to examine attitudes, perceived behavioral control, and norms related to driving inattention and peer passengers. Results The sample was 50% male, mean age 17.39 (sd 0.52) with mean length of licensure 173.7 days (sd 109.2). Three themes emerged: 1) “Good and not good” passengers; 2) Passengers and technology as harmful and helpful; and 3) The driver is in charge. Conclusions While passengers can be a source of distraction, our participants also identified passenger behaviors that reduced risk, such as assistance with technology and guidance for directions. Practical Implications An understanding of teens’ perceptions of peer passengers can contribute to the development of effective interventions targeting teen driver inattention. Nurses are well-positioned to contribute to these teen crash prevention efforts. PMID:27496828

  15. High-speed civil transport issues and technology program

    Science.gov (United States)

    Hewett, Marle D.

    1992-01-01

    A strawman program plan is presented, consisting of technology developments and demonstrations required to support the construction of a high-speed civil transport. The plan includes a compilation of technology issues related to the development of a transport. The issues represent technical areas in which research and development are required to allow airframe manufacturers to pursue an HSCT development. The vast majority of technical issues presented require flight demonstrated and validated solutions before a transport development will be undertaken by the industry. The author believes that NASA is the agency best suited to address flight demonstration issues in a concentrated effort. The new Integrated Test Facility at NASA Dryden Flight Research Facility is considered ideally suited to the task of supporting ground validations of proof-of-concept and prototype system demonstrations before night demonstrations. An elaborate ground hardware-in-the-loop (iron bird) simulation supported in this facility provides a viable alternative to developing an expensive fill-scale prototype transport technology demonstrator. Drygen's SR-71 assets, modified appropriately, are a suitable test-bed for supporting flight demonstrations and validations of certain transport technology solutions. A subscale, manned or unmanned flight demonstrator is suitable for flight validation of transport technology solutions, if appropriate structural similarity relationships can be established. The author contends that developing a full-scale prototype transport technology demonstrator is the best alternative to ensuring that a positive decision to develop a transport is reached by the United States aerospace industry.

  16. Disruptive technologies and transportation : final report.

    Science.gov (United States)

    2016-06-01

    Disruptive technologies refer to innovations that, at first, may be considered unproven, lacking refinement, relatively unknown, or even impractical, but ultimately they supplant existing technologies and/or applications. In general, disruptive techn...

  17. The research into development of passanger transport by land

    Directory of Open Access Journals (Sweden)

    J. Butkevičius

    2004-10-01

    Full Text Available This is the first scientific work in Lithuania carrying out a complex research into passenger transport by land, covering all problematic issues related to the field such as development, market planning, organization, management, competition, contractual relations, financing, development of transport technologies, implementation of new transport technologies elaborating the theoretical base for the development of passenger transport. The research shows the analysis of the movement of passenger transport volumes and determines the regularity of these changes. The forecast of passenger transport by land is based on a multiple analysis. The work determines the perspective markets of rail and road transport as well as elaborates the principles of the improvement of road and rail transport interaction.The author originates the principles of the development of passenger transport technologies and the principles of the implementation of advanced technologies. The author also founds the principles of planning, organization and management of land transport as well as the principles of security of equal conditions of competition and contractual relations between customers and haulers.

  18. Maglev vehicles and superconductor technology: Integration of high-speed ground transportation into the air travel system

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, L.R.; Rote, D.M.; Hull, J.R.; Coffey, H.T.; Daley, J.G.; Giese, R.F.

    1989-04-01

    This study was undertaken to (1) evaluate the potential contribution of high-temperature superconductors (HTSCs) to the technical and economic feasibility of magnetically levitated (maglev) vehicles, (2) determine the status of maglev transportation research in the United States and abroad, (3) identify the likelihood of a significant transportation market for high-speed maglev vehicles, and (4) provide a preliminary assessment of the potential energy and economic benefits of maglev systems. HTSCs should be considered as an enhancing, rather than an enabling, development for maglev transportation because they should improve reliability and reduce energy and maintenance costs. Superconducting maglev transportation technologies were developed in the United States in the late 1960s and early 1970s. Federal support was withdrawn in 1975, but major maglev transportation programs were continued in Japan and West Germany, where full-scale prototypes now carry passengers at speeds of 250 mi/h in demonstration runs. Maglev systems are generally viewed as very-high-speed train systems, but this study shows that the potential market for maglev technology as a train system, e.g., from one downtown to another, is limited. Rather, aircraft and maglev vehicles should be seen as complementing rather than competing transportation systems. If maglev systems were integrated into major hub airport operations, they could become economical in many relatively high-density US corridors. Air traffic congestion and associated noise and pollutant emissions around airports would also be reduced. 68 refs., 26 figs., 16 tabs.

  19. Program strategy document for the Nuclear Materials Transportation Technology Center

    International Nuclear Information System (INIS)

    Jefferson, R.M.

    1979-07-01

    A multiyear program plan is presented which describes the program of the Nuclear Materials Transportation Technology Center (TIC) at Sandia Laboratories. The work element plans, along with their corresponding work breakdown structures, are presented for TTC activities in the areas of Technology and Information Center, Systems Development, Technology, and Institutional Issues for the years from 1979 to 1985

  20. Test facilities for radioactive materials transport packages (Transportation Technology Center Inc., Pueblo, Colorado, USA)

    International Nuclear Information System (INIS)

    Conlon, P.C.L.

    2001-01-01

    Transportation Technology Center, Inc. is capable of conducting tests on rail vehicle systems designed for transporting radioactive materials including low level waste debris, transuranic waste, and spent nuclear fuel and high level waste. Services include rail vehicle dynamics modelling, on-track performance testing, full scale structural fatigue testing, rail vehicle impact tests, engineering design and technology consulting, and emergency response training. (author)

  1. 49 CFR 223.17 - Identification of equipped locomotives, passenger cars and cabooses.

    Science.gov (United States)

    2010-10-01

    ... cars and cabooses. 223.17 Section 223.17 Transportation Other Regulations Relating to Transportation...-LOCOMOTIVES, PASSENGER CARS AND CABOOSES Specific Requirements § 223.17 Identification of equipped locomotives, passenger cars and cabooses. Each locomotive, passenger car and caboose that is fully equipped with glazing...

  2. Sensor technology for hazardous cargo transportation safety.

    Science.gov (United States)

    2013-08-01

    The overall goal of this research project was to develop oxidant vapor detection devices that can be : used to ensure the safety of hazardous freight transportation systems. Two nanotechnology-based : systems originally developed for improvised explo...

  3. Working together : transportation opportunities for technology reinvestment

    Science.gov (United States)

    1993-05-10

    On May 10, 1993, nearly 100 representatives of the major defense companies, federal agencies, national laboratories, universities, and state governments met at the U.S. Department of Trans;pportation's Volpe National Transportation Systems Center, Ca...

  4. Predicting the impacts of new technology aircraft on international air transportation demand

    Science.gov (United States)

    Ausrotas, R. A.

    1981-01-01

    International air transportation to and from the United States was analyzed. Long term and short term effects and causes of travel are described. The applicability of econometric methods to forecast passenger travel is discussed. A nomograph is developed which shows the interaction of economic growth, airline yields, and quality of service in producing international traffic.

  5. HRTPO strategic campaign and vision plan for passenger rail : phase 1 overview.

    Science.gov (United States)

    2010-03-17

    SUBJECT: : TEMS (Transportation Economics & Management Systems, Inc.), the consultant specializing in : passenger rail planning, was secured by the HRTPO and its partner DRPT to evaluate the potential : passenger rail service alternative defined by t...

  6. Sustainable transportation : technology, engineering, and science - summer camp instructor's guide.

    Science.gov (United States)

    2014-03-01

    This document reproduces the instructors guide for a ten day transportation engineering summer camp that was held at the University of Idaho in July 2013. The instructors guide is split into three units: Unit 1: Vehicle Technology, Unit 2: Traf...

  7. Economic and environmental impacts of alternative transportation technologies.

    Science.gov (United States)

    2013-04-01

    This project has focused on comparing alternative transportation technologies in terms of their : environmental and economic impacts. The research is data-driven and quantitative, and examines the : dynamics of impact. We have developed new theory an...

  8. Changing technology in transportation : automated vehicles in freight.

    Science.gov (United States)

    2017-06-27

    The world of transportation is on the verge of undergoing an impactful transformation. Over the past decade, automotive computing technology has progressed far more rapidly than anticipated. Most major auto manufacturers integrated automated features...

  9. Accessible transportation technologies research initiative (ATTRI) : online dialogue.

    Science.gov (United States)

    2014-08-01

    In coordination with Easter Seals Project ACTION (ESPA) and with support from Noblis, ATTRI held an online dialogue from May 15-June 6, 2014 to garner input on : mobility and transportation technology for travelers with disabilities. Participants wer...

  10. Technology assessments in transportation: survey of recent literature

    Energy Technology Data Exchange (ETDEWEB)

    LaBelle, S.J.

    1980-03-01

    A survey and an evaluation of recent studies of transportation systems done in a technology-assessment framework were undertaken as the basis for a detailed statement of work for a US Department of Energy technology assessment of transportation energy-conservation strategies. Several bibliographies were searched and numerous professionals in the field of technology assessment were contacted regarding current work. Detailed abstracts were prepared for studies judged to be sufficiently broad in coverage of impacts assessed, yet detailed in coverage of all or part of the nation's transportation systems. Some studies were rich in data but not comprehensive in their analytical approach; brief abstracts were prepared for these. An explanation of the criteria used to screen the studies, as well as abstracts of 37 reports, are provided in this compendium of transportation-technology-assessment literature.

  11. 2015 OST-R Transportation Technology Scan : A Look Ahead.

    Science.gov (United States)

    2015-12-01

    This report identifies emerging technologies and innovative applications that may begin to have significant impact on our transportation systems within three to five years. They represent several industries and disciplines and could affect all major ...

  12. Divers of Passenger Demand

    OpenAIRE

    Wittmer, Andreas

    2011-01-01

    -Overview drivers of passenger demand -Driver 1: Economic growth in developing countries -Driver 2: International business travel in developed countries -Driver 3: International leisure travel in developed countries

  13. Analysing passenger arrivals rates and waiting time at bus stops

    OpenAIRE

    Kaparias, I.; Rossetti, C.; Trozzi, V.

    2015-01-01

    The present study investigates the rather under-explored topic of passenger waiting times at public transport facilities. Using data collected from part of London’s bus network by means of physical counts, measurements and observations, and complemented by on-site passenger interviews, the waiting behaviour is analysed for a number of bus stops served by different numbers of lines. The analysis employs a wide range of statistical methods and tools, and concentrates on three aspects: passenger...

  14. 14 CFR 382.133 - What are the requirements concerning the evaluation and use of passenger-supplied electronic...

    Science.gov (United States)

    2010-01-01

    ... evaluation and use of passenger-supplied electronic devices that assist passengers with respiration in the... What are the requirements concerning the evaluation and use of passenger-supplied electronic devices... to use in the passenger cabin during air transportation, a ventilator, respirator, continuous...

  15. Connected Vehicle Technologies for Efficient Urban Transportation

    Science.gov (United States)

    2016-10-24

    Connected vehicle technology is employed to optimize the vehicle's control system in real-time to reduce congestion, improve fuel economy, and reduce emissions. This project's goal was to develop a two-way communication system to upload vehicle data ...

  16. Overview of Advanced Technology Transportation, 2004 Update

    Energy Technology Data Exchange (ETDEWEB)

    Eudy, L.; Zuboy, J.

    2004-08-01

    Document offers a ''snapshot'' of current vehicle technologies and trends. DOE program managers use this document to plan test and evaluation activities that focus resources where they have the greatest impact.

  17. Modelling the Transport Process in Marine Container Technology

    Directory of Open Access Journals (Sweden)

    Serđo Kos

    2003-01-01

    Full Text Available The paper introduces a mathematical problem that occursin marine container technology when programming the transportof a beforehand established number of ISO containers effectedby a full container ship from several ports of departure toseveral ports of destination at the minimum distance (time innavigation or at minimum transport costs. The application ofthe proposed model may have an effect on cost reduction incontainer transport thereby improving the operation process inmarine transport technology. The model has been tested by usinga numerical example with real data. In particular, it describesthe application of the dual variables in the analysis ofoptimum solution.

  18. National Space Transportation System (NSTS) technology needs

    Science.gov (United States)

    Winterhalter, David L.; Ulrich, Kimberly K.

    1990-01-01

    The National Space Transportation System (NSTS) is one of the Nation's most valuable resources, providing manned transportation to and from space in support of payloads and scientific research. The NSTS program is currently faced with the problem of hardware obsolescence, which could result in unacceptable schedule and cost impacts to the flight program. Obsolescence problems occur because certain components are no longer being manufactured or repair turnaround time is excessive. In order to achieve a long-term, reliable transportation system that can support manned access to space through 2010 and beyond, NASA must develop a strategic plan for a phased implementation of enhancements which will satisfy this long-term goal. The NSTS program has initiated the Assured Shuttle Availability (ASA) project with the following objectives: eliminate hardware obsolescence in critical areas, increase reliability and safety of the vehicle, decrease operational costs and turnaround time, and improve operational capability. The strategy for ASA will be to first meet the mandatory needs - keep the Shuttle flying. Non-mandatory changes that will improve operational capability and enhance performance will then be considered if funding is adequate. Upgrade packages should be developed to install within designated inspection periods, grouped in a systematic approach to reduce cost and schedule impacts, and allow the capability to provide a Block 2 Shuttle (Phase 3).

  19. Proceedings of the 2008 transportation technologies and fuels forum

    International Nuclear Information System (INIS)

    2008-01-01

    As a large emitter of pollutants, the transportation industry is now seeking to develop a sustainable transportation plan for the future by developing methods of reducing emissions and improving the fuel efficiency of vehicles. This forum discussed recent innovations in vehicle transportation technologies. Industry leaders, government representatives, and researchers discussed methods of reducing greenhouse gases (GHGs) and air pollution in the transportation sector. Advanced combustion technologies were outlined, and recent developments in hybrid electric-powered vehicles were discussed. Research related to fuel cells, hydrogen fuels and biofuels was presented. The impacts of polluting vehicles on public health were also discussed. The forum was divided into the following 5 sessions: (1) setting the scene, (2) future fuels, (3) emissions, (4) EVs now, and (5) the road to the future. The sessions were followed by a panel on technology roadmaps. The forum featured 14 presentations, of which 4 have been catalogued separately for inclusion in this database. tabs., figs.

  20. THE POSSIBILITY OF REDUCING THE IMPACT OF TRAFFIC NOISE ON THE PERSON IN THE PASSENGER CARS OF A RAILWAY TRANSPORT IS THE METHOD, BASED ON THE MASKING EFFECT

    Directory of Open Access Journals (Sweden)

    S. V. Shmakov

    2008-01-01

    Full Text Available The problem of reduction of the long-term traffic noise effect on the person in coach passenger spaces is examined. The method of solving the problem is offered. The corresponding calculations and analysis of results are performed. The functional diagram on technical realization of this method is proposed.

  1. The outlook of innovative optical-electronic technologies implementation in transportation

    Science.gov (United States)

    Shilina, Elena V.; Ryabichenko, Roman B.

    2005-06-01

    Information and telecommunication technologies (ITT) are already tool economic development of society and their role will grow. The first task is providing of information security of ITT that is necessary for it distribution in "information" society. The state policy of the leading world countries (USA, France, Japan, Great Britain and China) is focused on investment huge funds in innovative technologies development. Within the next 4-6 years the main fiber-optic transfer lines will have data transfer speed 40 Gbit/s, number of packed channels 60-200 that will provide effective data transfer speed 2,4-8 Tbit/s. Photonic-crystalline fibers will be promising base of new generation fiber-optic transfer lines. The market of information imaging devices and digital photo cameras will be grown in 3-5 times. Powerful lasers based on CO2 and Nd:YAG will be actively used in transport machinery construction when producing aluminum constructions of light rolling-stock. Light-emitting diodes (LEDs) will be base for energy saving and safety light sources used for vehicles and indoor lighting. For example, in the USA cost reducing for lighting will be 200 billion dollars. Implementation analysis of optic electronic photonic technologies (OPT) in ground and aerospace systems shows that they provide significant increasing of traffic safety, crew and passengers comfort with help of smart vehicles construction and non-contact dynamic monitoring both transport facilities (for example, wheel flanges) and condition of rail track (road surface), equipping vehicles with night vision equipment. Scientific-technical programs of JSC "RZD" propose application of OPT in new generation systems: axle-box units for coaches and freight cars monitoring when they are moved, track condition analysis, mechanical stress and permanent way irregularity detection, monitoring geometric parameters of aerial contact wire, car truck, rail and wheel pair roll surface, light signals automatic detection from

  2. Tourism Transport, Technology, and Carbon Dioxide Emissions

    NARCIS (Netherlands)

    Peeters, P.M.

    2010-01-01

    Technological development from horse-drawn carriages to the new Airbus A380 has led to a remarkable increase in both the capacity and speed of tourist travel. This development has an endogenous systemic cause and will continue to increase carbon dioxide emissions/energy consumption if left

  3. Information-communications technologies (ICT) and transport

    NARCIS (Netherlands)

    Cohen, G.; Salomon, I.; Nijkamp, P.

    2002-01-01

    Cities around the world attempt to imitate the Silicon Valley model by adopting public policies aimed at attracting new high-tech industries and Research and Development activities. The adoption of Information and Communications Technologies (ICT) as elements in a public policy is based on the

  4. Space Transportation Materials and Structures Technology Workshop. Volume 2: Proceedings

    International Nuclear Information System (INIS)

    Cazier, F.W. Jr.; Gardner, J.E.

    1993-02-01

    The Space Transportation Materials and Structures Technology Workshop was held on September 23-26, 1991, in Newport News, Virginia. The workshop, sponsored by the NASA Office of Space Flight and the NASA Office of Aeronautics and Space Technology, was held to provide a forum for communication within the space materials and structures technology developer and user communities. Workshop participants were organized into a Vehicle Technology Requirements session and three working panels: Materials and Structures Technologies for Vehicle Systems, Propulsion Systems, and Entry Systems. Separate abstracts have been prepared for papers in this report

  5. Rail passengers rights

    Directory of Open Access Journals (Sweden)

    Đurđev Dušanka J.

    2016-01-01

    Full Text Available The legal framework of rail passengers rights is set out in a combination of international and European law: an international measure, the rather unwieldy Uniform Rules concerning the Contract for International Carriage of Passengers and Luggage by Rail, forming part of the Convention concerning International Carriage by Rail of 9 May 1980 (as amended by the Vilnius Protocol of 3 June 1999 ['CIV'], lays down a basic framework which is then fleshed out by more recent EU legislation, Regulation (EC No 1371/2007 on Rail Passengers ' Rights and Obligations. Regulation 1371/2007/EC on rail passenger rights and obligations sets out minimum quality standards that have to be guaranteed to all passengers on all lines. .

  6. Traffic and transport technology-road, railway, and water-borne transportation

    Science.gov (United States)

    1990-01-01

    This is "Part 2: Case Studies - Chapter 9" of the book, "The Japanese Experience in Technology", and includes the following subsections: Modernization and the railway; The transportation network; Issues in railway policy; Original design and producti...

  7. Future Vehicle Technologies : high performance transportation innovations

    Energy Technology Data Exchange (ETDEWEB)

    Pratt, T. [Future Vehicle Technologies Inc., Maple Ridge, BC (Canada)

    2010-07-01

    Battery management systems (BMS) were discussed in this presentation, with particular reference to the basic BMS design considerations; safety; undisclosed information about BMS; the essence of BMS; and Future Vehicle Technologies' BMS solution. Basic BMS design considerations that were presented included the balancing methodology; prismatic/cylindrical cells; cell protection; accuracy; PCB design, size and components; communications protocol; cost of manufacture; and expandability. In terms of safety, the presentation addressed lithium fires; high voltage; high voltage ground detection; crash/rollover shutdown; complete pack shutdown capability; and heat shields, casings, and impact protection. BMS bus bar engineering considerations were discussed along with good chip design. It was concluded that FVTs advantage is a unique skillset in automotive technology and the development of speed and cost effectiveness. tabs., figs.

  8. Deduction of passengers' route choice from smart card data

    NARCIS (Netherlands)

    Van Der Hurk, Evelien; Kroon, Leo; Maroti, Gabor; Vervest, Peter

    2013-01-01

    Deducing passengers' route choice from smart card data provides public transport operators the opportunity to evaluate passenger service. Especially in case of disruptions when route choice models may not be valid this is an advantage. This paper proposes a method for deducing the chosen route of

  9. Deduction of passengers' route choices from smart card data

    NARCIS (Netherlands)

    van der Hurk, E.; Kroon, L.G.; Maroti, G.; Vervest, P.

    2015-01-01

    Deducing passengers' route choices from smart card data provides public transport operators the opportunity to evaluate and improve their passenger service. Particularly in the case of disruptions, when traditional route choice models may not be valid, this is an advantage. This paper proposes a

  10. Network structure of subway passenger flows

    Science.gov (United States)

    Xu, Q.; Mao, B. H.; Bai, Y.

    2016-03-01

    The results of transportation infrastructure network analyses have been used to analyze complex networks in a topological context. However, most modeling approaches, including those based on complex network theory, do not fully account for real-life traffic patterns and may provide an incomplete view of network functions. This study utilizes trip data obtained from the Beijing Subway System to characterize individual passenger movement patterns. A directed weighted passenger flow network was constructed from the subway infrastructure network topology by incorporating trip data. The passenger flow networks exhibit several properties that can be characterized by power-law distributions based on flow size, and log-logistic distributions based on the fraction of boarding and departing passengers. The study also characterizes the temporal patterns of in-transit and waiting passengers and provides a hierarchical clustering structure for passenger flows. This hierarchical flow organization varies in the spatial domain. Ten cluster groups were identified, indicating a hierarchical urban polycentric structure composed of large concentrated flows at urban activity centers. These empirical findings provide insights regarding urban human mobility patterns within a large subway network.

  11. Level of service at airport passenger terminals

    Directory of Open Access Journals (Sweden)

    Tasić Tamara D.

    2016-01-01

    Full Text Available Airport terminals are designed by level of service standards which are regulated by International Air Transport Association (IATA. Level of service offered to passengers, regarding to the primary processes, is not necessarily equivalent to the level of service perceived by them. The fact that passengers spending longer times in terminals makes the secondary processes more important in passenger experience. Aiming to improving airport attractiveness, and business success, passenger perception is approached by paying close attention. This paper discusses the two aspects of level of service. Concept of level of service used in air traffic industry with purpose of designing and planning of passenger terminal is derived from the Highway Capacity Manual. Subject of the paper regards last changes which have been introduced during 2014. Second part of the paper explains the needs of examining and analyzing passenger perception from the management point of view, and gives overview of methods which are conducted during researches. Similarities and differences are shown among measurements of level of service and perceived level of service, including the importance of these aspects mutual complementing.

  12. Avaliação multicriterial de desempenho: um estudo de caso na indústria de transporte coletivo de passageiros Multicriterial performance assessment: a case study in the urban passenger transportation sector

    Directory of Open Access Journals (Sweden)

    Miguel Afonso Sellitto

    2006-05-01

    Full Text Available O objetivo deste trabalho é apresentar uma proposta de estrutura multicriterial de avaliação de desempenho em organizações. O trabalho inicia descrevendo e contextualizando conceitos relativos aos sistemas de medição de desempenho em organizações. Também descreve modelos de gestão baseados nos critérios de excelência do prêmio Malcolm Baldridge e na teoria da mentalidade enxuta. A seguir propõe um método para a construção de uma estrutura flexível de avaliação de desempenho e descreve um caso de aplicação que a exemplifica: a avaliação do desempenho de aspectos da mentalidade enxuta inseridos em uma operação de transporte coletivo. Ao final discutem-se os resultados do caso, comparam-se estes com o método de avaliação vigente em duas empresas da indústria e encaminha-se a continuidade da pesquisa.This paper proposes a multicriterial framework for strategic performance assessment, beginning with a presentation of concepts of performance measurement, and a description of management models based on the Malcolm Baldridge Quality Award and lean thinking. A method is then outlined for building a flexible framework for performance assessment and a case study is described: an evaluation of the performance of aspects of lean thinking in an urban passenger transportation operation. The paper concludes with a discussion of the findings of the case study using the proposed method, comparing it with the evaluation method currently used by two companies in the sector under study.

  13. Investigation of air transportation technology at Princeton University, 1986

    Science.gov (United States)

    Stengel, Robert F.

    1988-01-01

    The Air Transportation Technology Program at Princeton proceeded along four avenues: Guidance and control strategies for penetration of microbursts and wind shear; Application of artificial intelligence in flight control systems; Computer aided control system design; and Effects of control saturation on closed loop stability and response of open loop unstable aircraft. Areas of investigation relate to guidance and control of commercial transports as well as general aviation aircraft. Interaction between the flight crew and automatic systems is a subject of prime concern.

  14. An Integrated Safety Analysis Methodology for Emerging Air Transport Technologies

    Science.gov (United States)

    Kostiuk, Peter F.; Adams, Milton B.; Allinger, Deborah F.; Rosch, Gene; Kuchar, James

    1998-01-01

    The continuing growth of air traffic will place demands on NASA's Air Traffic Management (ATM) system that cannot be accommodated without the creation of significant delays and economic impacts. To deal with this situation, work has begun to develop new approaches to providing a safe and economical air transportation infrastructure. Many of these emerging air transport technologies will represent radically new approaches to ATM, both for ground and air operations.

  15. 75 FR 16552 - High-Speed Intercity Passenger Rail (HSIPR) Program

    Science.gov (United States)

    2010-04-01

    ...; Enhancing intercity travel options; Ensuring a state of good repair of key intercity passenger rail assets... DEPARTMENT OF TRANSPORTATION Federal Railroad Administration High-Speed Intercity Passenger Rail... selections for the High-Speed Intercity Passenger Rail (HSIPR) Program. This notice builds on the program...

  16. 49 CFR 583.10 - Outside suppliers of passenger motor vehicle equipment.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 7 2010-10-01 2010-10-01 false Outside suppliers of passenger motor vehicle... CONTENT LABELING § 583.10 Outside suppliers of passenger motor vehicle equipment. (a) For each unique type of passenger motor vehicle equipment for which a manufacturer or allied supplier requests information...

  17. 49 CFR 583.11 - Allied suppliers of passenger motor vehicle equipment.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 7 2010-10-01 2010-10-01 false Allied suppliers of passenger motor vehicle... CONTENT LABELING § 583.11 Allied suppliers of passenger motor vehicle equipment. (a) For each unique type of passenger motor vehicle equipment which an allied supplier supplies to the manufacturer with which...

  18. Transportation and information trends in technology and policy

    CERN Document Server

    Piyushimita

    2013-01-01

    Transformations in wireless connectivity and location-aware technologies hold the promise of bringing a sea-change in the way transportation information is generated and used in the future. Sensors in the transportation system, when integrated with those in other sectors (for example, energy, utility and health) have the potential to foster novel new ways of improving livability and sustainability.The end-result of these developments has been somewhat contradictory. Although automation in the transportation environment has become increasingly widespread, the level of involvement and active par

  19. Study of Advanced Propulsion Systems for Small Transport Aircraft Technology (STAT) Program

    Science.gov (United States)

    Baerst, C. F.; Heldenbrand, R. W.; Rowse, J. H.

    1981-01-01

    Definitions of takeoff gross weight, performance, and direct operating cost for both a 30 and 50 passenger airplane were established. The results indicate that a potential direct operating cost benefit, resulting from advanced technologies, of approximately 20 percent would be achieved for the 1990 engines. Of the numerous design features that were evaluated, only maintenance-related items contributed to a significant decrease in direct operating cost. Recommendations are made to continue research and technology programs for advanced component and engine development.

  20. Development in the technology of internal combustion engines for passenger cars over the next 10 to 15 years

    Energy Technology Data Exchange (ETDEWEB)

    Willand, J [Daimler Benz (Germany)

    1996-12-01

    The mainly use of fossil fuels and their limited resources and also the requirement of a 25% reduction of CO{sub 2}-emissions in Germany caused by the motor traffic, force the pressure on the car manufacturer to reduce the fuel consumption by respecting the emission limits given by the legislative institutions. The development of the worldwide vehicle population shows, that we can expect that markets like eastern Europe and developing countries will book the biggest amount of growing during the next decades. Related to this fact is also the amount of CO{sub 2}-Emissions caused by this countries. Of interest is that the emissions produced by cars will stagnate which is basically caused by the falling fuel consumption and in opposition the emissions of heavy trucks will expand over proportional. The reason is the strong expanding infrastructure in new markets and the fast growing number of heavy trucks in those countries. The target for Mercedes Benz is to reach a fuel economy until 2005 for the vehicle fleet of a maximum 6,0 liter / 100 km. Results concerning fuel economy could only be achieved on the base of progressive technologies. (EG)

  1. Technology and equipment to improve reliability of pipeline transport

    Science.gov (United States)

    Suleimanov, D. F.; Shulayev, N. S.; Bondar, K. E.; Laponov, S. V.; Uzinger, A. A.

    2017-10-01

    The article is dedicated to development of technology and hardware design of method pipeline transport reliability improving by improving the isolated coating properties modified by microwave radiation. The article describes the technology of the modification process of the coating and instrumentation production, which allows improving operational properties not only in stationary conditions in the manufacture of the insulation coating, but also during its replacement in the field.

  2. Upgrading of waste oils into transportation fuels using hydrotreating technologies

    OpenAIRE

    Sudipta De; Rafael Luque

    2014-01-01

    The generation of organic waste continues to increase, causing severe environmental pollution. Waste valorization is currently an emerging technology that can address this problem with an extra benefit of producing a range of valued products. In this contribution, we report the current developments in hydrotreating technologies for upgrading waste oil fractions into usable transportation fuels. Particular focus is given on the catalysts selection for a general hydroprocessing technique as wel...

  3. High-Speed Train Stop-Schedule Optimization Based on Passenger Travel Convenience

    OpenAIRE

    Dingjun Chen; Shaoquan Ni; Chang’an Xu; Hongxia Lv; Simin Wang

    2016-01-01

    The stop-schedules for passenger trains are important to the operation planning of high-speed trains, and they decide the quality of passenger service and the transportation efficiency. This paper analyzes the specific manifestation of passenger travel convenience and proposes the concepts of interstation accessibility and degree of accessibility. In consideration of both the economic benefits of railway corporations and the travel convenience of passengers, a multitarget optimization model i...

  4. Reducing global NOx emissions: developing advanced energy and transportation technologies.

    Science.gov (United States)

    Bradley, Michael J; Jones, Brian M

    2002-03-01

    Globally, energy demand is projected to continue to increase well into the future. As a result, global NOx emissions are projected to continue on an upward trend for the foreseeable future as developing countries increase their standards of living. While the US has experienced improvements in reducing NOx emissions from stationary and mobile sources to reduce ozone, further progress is needed to reduce the health and ecosystem impacts associated with NOx emissions. In other parts of the world, (in developing countries in particular) NOx emissions have been increasing steadily with the growth in demand for electricity and transportation. Advancements in energy and transportation technologies may help avoid this increase in emissions if appropriate policies are implemented. This paper evaluates commercially available power generation and transportation technologies that produce fewer NOx emissions than conventional technologies, and advanced technologies that are on the 10-year commercialization horizon. Various policy approaches will be evaluated which can be implemented on the regional, national and international levels to promote these advanced technologies and ultimately reduce NOx emissions. The concept of the technology leap is offered as a possibility for the developing world to avoid the projected increases in NOx emissions.

  5. Transportation Beyond 2000: Technologies Needed for Engineering Design

    Science.gov (United States)

    Huebner, Lawrence D. (Compiler); Asbury, Scott C. (Compiler); Lamar, John E. (Compiler); McKinley, Robert E., Jr. (Compiler); Scott, Robert C. (Compiler); Small, William J. (Compiler); Torres, Abel O. (Compiler)

    1996-01-01

    The purpose of the workshop was to acquaint the staff of the NASA Langley Research Center with the broad spectrum of transportation challenges and concepts foreseen within the next 20 years. The hope is that material presented at the workshop and contained in this document will stimulate innovative high-payoff research directed towards the efficiency of future transportation systems. The workshop included five sessions designed to stress the factors that will lead to a revolution in the way we will travel in the 21st century. The first session provides the historical background and a general perspective for future transportation, including emerging transportation alternatives such as working at a distance. Personal travel is the subject of Session Two. The third session looks at mass transportation, including advanced rail vehicles, advanced commuter aircraft, and advanced transport aircraft. The fourth session addresses some of the technologies required for the above revolutionary transportation systems to evolve. The workshop concluded with a wrap-up panel discussion, Session Five. The topics presented herein all have viable technical components and are at a stage in their development that, with sufficient engineering research, one or more of these could make a significant impact on transportation and our social structure.

  6. 49 CFR 39.93 - What wheelchairs and other assistive devices may passengers with a disability bring onto a...

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 1 2010-10-01 2010-10-01 false What wheelchairs and other assistive devices may passengers with a disability bring onto a passenger vessel? 39.93 Section 39.93 Transportation Office of the... and Services to Passengers With Disabilities § 39.93 What wheelchairs and other assistive devices may...

  7. 49 CFR 39.43 - May PVOs impose special charges on passengers with a disability for providing services required...

    Science.gov (United States)

    2010-10-01

    ... to passengers with a disability are available only in a type or class of service or part of a vessel that are more expensive than the type or class of service or part of a vessel that the passenger... of the Secretary of Transportation TRANSPORTATION FOR INDIVIDUALS WITH DISABILITIES: PASSENGER...

  8. SAFETY AND QUALITY CONTROL OF TRANSPORT SERVICES ON RAILWAY TRANSPORT

    Directory of Open Access Journals (Sweden)

    I. P. Sadlovska

    2010-10-01

    Full Text Available The article presents the provisions to improve procedure of licensing of passenger and freight transportation, technical specifications for services related to the passenger and freight transportations.

  9. Analyzing Factors Of In-flight Services Of Garuda Indonesia And Batik Air Towards Passengers Satisfaction

    OpenAIRE

    Tumewu, Ferdinand; Tulandi, Victor Michael

    2014-01-01

    Transportation services play an important role in supporting any activity, of human. Various types of the transportation that we use. Among them, are air transportation or airplane. Talk about the satisfaction of airline passenger, nowadays many airlines competing to provide the best service for the passengers, one of the things that can influence passenger satisfaction is through airline service especially in-flight service. The objective of this research is to identify the factors of in-fli...

  10. Crippling test of a Budd Pioneer passenger car

    Science.gov (United States)

    2012-04-16

    This research program was sponsored by the Federal Railroad Administration (FRA) Office of Research and Development in support of the advancement of improved safety standards for passenger rail vehicles. FRA and the Volpe National Transportation Syst...

  11. Occupant Volume Integrity Evaluation in Passenger Rail Cars

    Science.gov (United States)

    2012-02-01

    This research, which is intended to enable the growth of high-speed and intercity passenger rail transportation, was sponsored by the Federal Railroad Administration (FRA) Office of Research and Development, as part of the train Occupant Protection r...

  12. Analyzing injury severity of bus passengers with different movements.

    Science.gov (United States)

    Li, Duo; Zhao, Yifei; Bai, Qiang; Zhou, Bei; Ling, Hongbiao

    2017-07-04

    Though public transport vehicles are rarely involved in mass casualty accidents, when they are, the number of injuries and fatalities is usually high due to the high passenger capacity. Of the few studies that have been conducted on bus safety, the majority focused on vehicle safety features, road environmental factors, as well as driver characteristics. Nevertheless, few studies have attempted to investigate the underlying risk factors related to bus occupants. This article presents an investigation aimed at identifying the risk factors affecting injury severity of bus passengers with different movements. Three different passenger movement types including standing, seated, and boarding/alighting were analyzed individually using classification and regression tree (CART) method based on publicly available accident database of Great Britain. According to the results of exploratory analyses, passenger age and vehicle maneuver are associated with passenger injury severity in all 3 types of accidents. Moreover, the variable "skidding and overturning" is associated with injury severity of seated passengers and driver age is correlated with injury severity of standing and boarding/alighting passengers. The CART method shows its ability to identify and easily explain the complicated patterns affecting passenger injury severity. Several countermeasures to reduce bus passenger injury severity are recommended.

  13. Development of alpha radioactivity monitor using ionized air transport technology

    International Nuclear Information System (INIS)

    Maekawa, Tatsuyuki

    2008-01-01

    A novel alpha radioactivity monitor using ionized air transport technology has been developed for future constitution of 'Clearance Level' for uranium and TRU radioactive waste. We carried out optimum design and realized two kinds of practical alpha activity monitor, combining with radiation detector technology, ionized air physics and computational fluid dynamics. The results will bring paradigm shift on the alpha-ray measurement such as converting 'closely contacting and scanning measurement' to 'remotely measurement in the block', and drastically improve the efficiency of measurement operation. We hope that this technology will be widely endorsed as the practical method for the alpha clearance measurement in future. (author)

  14. DOE/PNC joint program on transportation technology

    International Nuclear Information System (INIS)

    Kubo, M.; Kajitani, M.; Seya, M.; Yoshimura, H.R.; Moya, J.L.; May, R.A.; Huerta, M.; Stenberg, D.R.

    1986-01-01

    This paper summarizes the work performed in a cooperative program on transportation technology between the Department of Energy (DOE) and the Power Reactor and Nuclear Fuel Development Corporation (PNC) of Japan. This work was performed at Sandia National Laboratories (SNL) in Albuquerque, New Mexico. The joint program emphasized the safety analysis for truck transportation of special nuclear materials (SNM) in Japan. Tasks included structural analyses and testing, thermal testing, leak rate studies and tests, and transportation risk assessments. The purpose of this paper is to present the results of full-scale structural and thermal tests conducted on a PNC development SNM transport system. Correlation of full-scale impact test results with structural analysis and scale model testing will also be reviewed

  15. From microsystems technology to the Saenger II space transportation system

    Science.gov (United States)

    Vogels, Hanns Arnt

    The role of space projects as drivers and catalysts of technology advances is discussed and illustrated from the perspective of the West German aerospace industry, summarizing a talk presented at the 1986 meeting of the German aerospace society DGLR. The history of space-transportation-system (STS) technology since the 1950s is traced, emphasizing the needs for greater payload weights and lower costs, and the design concept of Saenger II, a proposed two-stage ESA STS employing a hypersonic jet transport aircraft as its first stage, is outlined. It is argued that experience gained in developing the rocket-launched Hermes STS will be applicable to the second stage of Saenger II. Recent developments in microsystems (combining microelectronics, micromechanics, and microoptics), advanced materials (fiber-reinforced plastics, metals, and ceramics), and energy technology (hydrogen-based systems and solar cells) are surveyed, and their applicability to STSs is considered.

  16. Transports of delight how technology materializes human imagination

    CERN Document Server

    Hancock, Peter

    2017-01-01

    This inspiring book shows how the spiritual side of life, with its thoughts, feelings, and aspirations, is intimately bound up with our material technologies. From the wonder of Gothic Cathedrals, to the quiet majesty of lighter than air flight, to the ultimate in luxury of the north Atlantic steamers, Peter Hancock explores how these sequential heights of technology have enabled our dreams of being transported to new and uncharted realms to become reality. Sometimes literally, sometimes figuratively, technology has always been there to make material the visions of our imagination. This book shows how this has essentially been true for all technologies from Stonehenge to space station. But technology is far from perfect. Indeed, the author argues here that some of the most public and tragic of its failures still remain instructive, emblematic, and even inspiring. He reports on examples such as a Cathedral of the Earth (Beauvais), a Cathedral of the Seas (Titanic), and a Cathedral of the Air (Hindenburg) and t...

  17. 49 CFR 1242.45 - Passenger and other revenue equipment (account XX-27-45).

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 9 2010-10-01 2010-10-01 false Passenger and other revenue equipment (account XX-27-45). 1242.45 Section 1242.45 Transportation Other Regulations Relating to Transportation... RAILROADS 1 Operating Expenses-Equipment § 1242.45 Passenger and other revenue equipment (account XX-27-45...

  18. Mitigation potential of greenhouse gas emission and implications on fuel consumption due to clean energy vehicles as public passenger transport in Kathmandu Valley of Nepal: A case study of trolley buses in Ring Road

    International Nuclear Information System (INIS)

    Pradhan, Shreekar; Ale, Bhakta Bahadur; Amatya, Vishwa Bhusan

    2006-01-01

    This paper estimates the consequences in fuel consumption and greenhouse gas emission due to the possible intervention of the electric run trolley buses in the existing public transport system in a particular road up to the year 2025 in Kathmandu Valley. It projects the scenarios on the basis that the passenger travel demand is the function of population and income. Basically, it uses the Long Range Energy Alternatives Planning System software to develop Business as Usual scenario and the five alternative scenarios. The alternative scenarios are 100% replacement of vehicles catering to mass-transit in the concerned routes, 50% replacement, 25% replacement, stopping future growth of other vehicles catering to mass-transit in the concerned routes and 25% replacement in the first year, and combination scenarios. The results estimate that the passenger travel demand will increase by three folds from the year 2003 to the year 2025. It projects the three-fold increase of the existing vehicle activity by the year 2025 in Business as Usual scenario. The fuel consumption will increase by 2.4 times compared to the year 2003. It estimates the total greenhouse gas (GHG) emission as 8.5 thousands tons in year 2003 which will increase by more than 3 times in year 2025. It estimates that 174.3 thousands t CO 2 e can be avoided in combination scenario. The paper concludes that the intervention of clean energy transport in the existing public transport can have a significant positive impact on the GHG emission and current fuel consumption

  19. Investigation of air transportation technology at Princeton University, 1984

    Science.gov (United States)

    Stengel, Robert F.

    1987-01-01

    The Air Transportation Technology Program at Princeton University, a program emphasizing graduate and undergraduate student research, proceeded along four avenues during 1984: (1) guidance and control strategies for penetration of microbursts and wind shear; (2) application of artificial intelligence in flight control systems; (3) effects of control saturation on closed loop stability; and (4) response of open loop unstable aircraft. Areas of investigation relate to guidance and control of commercial transports as well as to general aviation aircraft. Interaction between the flight crew and automatic systems is a subject of principle concern. These areas of investigation are briefly discussed.

  20. Development of hotcell transportation system technology for high radioactive material

    International Nuclear Information System (INIS)

    Seo, K. S.; Seo, C. S.; Lee, J. C.

    2012-04-01

    In the first stage of the research, the transportation and storage characteristics analysis of the pyroprocess materials, the development of horizontal type hot cell transportation system, and the design of interim storage system for the pyroprocess material are conducted. The optimized capacity, transportation frequency and operation period of pyroprocess facility are found using the logistics analysis program developed in this project. A new hot cell transportation system was designed. Through the safety analysis and test for the hot cell transportation system, the design license has been approved. A new type hot cell docking system with superior performance has been developed with a patented rotating lid system. We have reached to a unique concept of interim storage of pyroprocess materials and selected a system through a comparative evaluation of existing ones. In the second stage of the research, transportation/storage/sealing devices for PRIDE recovered material/wastes were developed. And test model for the devices in engineering scale facility were also developed. The design requirements for a vertical docking system were evaluated and the performance assessment using a scaled mock-up was conducted. Integrated storage management technology was evaluated for an efficient management of process materials. A heat transfer simulation and characteristics analysis for the storage system were conducted. The derivation of design requirements, design and fabrication of a canister test model, and preliminary safety assessment were conducted

  1. Advanced Air Transportation Technologies Project, Final Document Collection

    Science.gov (United States)

    Mogford, Richard H.; Wold, Sheryl (Editor)

    2008-01-01

    This CD ROM contains a compilation of the final documents of the Advanced Air Transportation Technologies (AAIT) project, which was an eight-year (1996 to 2004), $400M project managed by the Airspace Systems Program office, which was part of the Aeronautics Research Mission Directorate at NASA Headquarters. AAIT focused on developing advanced automation tools and air traffic management concepts that would help improve the efficiency of the National Airspace System, while maintaining or enhancing safety. The documents contained in the CD are final reports on AAIT tasks that serve to document the project's accomplishments over its eight-year term. Documents include information on: Advanced Air Transportation Technologies, Autonomous Operations Planner, Collaborative Arrival Planner, Distributed Air/Ground Traffic Management Concept Elements 5, 6, & 11, Direct-To, Direct-To Technology Transfer, Expedite Departure Path, En Route Data Exchange, Final Approach Spacing Tool - (Active and Passive), Multi-Center Traffic Management Advisor, Multi Center Traffic Management Advisor Technology Transfer, Surface Movement Advisor, Surface Management System, Surface Management System Technology Transfer and Traffic Flow Management Research & Development.

  2. Upgrading of waste oils into transportation fuels using hydrotreating technologies

    Directory of Open Access Journals (Sweden)

    Sudipta De

    2014-12-01

    Full Text Available The generation of organic waste continues to increase, causing severe environmental pollution. Waste valorization is currently an emerging technology that can address this problem with an extra benefit of producing a range of valued products. In this contribution, we report the current developments in hydrotreating technologies for upgrading waste oil fractions into usable transportation fuels. Particular focus is given on the catalysts selection for a general hydroprocessing technique as well as the competitive role of those catalysts in hydrotreating and hydrocracking processes.

  3. Development of alpha radioactivity measurement using ionized air transportation technology

    International Nuclear Information System (INIS)

    Kanemoto, Shigeru; Naito, Susumu; Sano, Akira; Sato, Mitsuyoshi; Fukumoto, Masahiko; Miyamoto, Yasuaki; Nanbu, Kenichi; Takahashi, Hiroyuki

    2005-01-01

    Alpha radioactivity Measurement using ionized Air Transportation technology (AMAT) is developed to measure alpha contaminated wastes with large and complex surfaces. An outline of this project was described in this text. A major problem of AMAT technology is that the theoretical relation between alpha radioactivity and observed ion current is unclear because of the complicated behavior of ionized air molecules. An ion current prediction model covering from ionization of air molecules to ion detection was developed based on atmospheric electrodynamics. This model was described in this text, too. (author)

  4. Analysing Models as a Knowledge Technology in Transport Planning

    DEFF Research Database (Denmark)

    Gudmundsson, Henrik

    2011-01-01

    critical analytic literature on knowledge utilization and policy influence. A simple scheme based in this literature is drawn up to provide a framework for discussing the interface between urban transport planning and model use. A successful example of model use in Stockholm, Sweden is used as a heuristic......Models belong to a wider family of knowledge technologies, applied in the transport area. Models sometimes share with other such technologies the fate of not being used as intended, or not at all. The result may be ill-conceived plans as well as wasted resources. Frequently, the blame...... device to illuminate how such an analytic scheme may allow patterns of insight about the use, influence and role of models in planning to emerge. The main contribution of the paper is to demonstrate that concepts and terminologies from knowledge use literature can provide interpretations of significance...

  5. Reducing Weight for Transportation Applications: Technology Challenges and Opportunities

    Science.gov (United States)

    Taub, Alan I.

    Today's land, sea and air transportation industries — as a business necessity — are focused on technology solutions that will make vehicles more sustainable in terms of energy, the environment, safety and affordability. Reducing vehicle weight is a key enabler for meeting these challenges as well as increasing payload and improving performance. The potential weight reductions from substituting lightweight metals (advanced high-strength steels, aluminum, magnesium and titanium alloys) are well established. For magnesium castings, weight savings of 60% have been reported [1]. The value of weight reduction depends on the transportation sector and ranges from about 5/kg saved for automobiles to over 500/kg saved for aircraft [2]. The challenge is to optimize the material properties and develop robust, high volume, manufacturing technologies and the associated supply chain to fabricate components and subsystems at the appropriate cost for each application.

  6. Workshop on technology issues of superconducting Maglev transportation systems

    International Nuclear Information System (INIS)

    Wegrzyn, J.E.; Shaw, D.T.

    1991-01-01

    There exists a critical need in the United States to improve its ground transportation system. One suggested system that offers many advantages over the current transportation infrastructure is Maglev. Maglev represents the latest evolution in very high and speed ground transportation, where vehicles are magnetically levitated, guided, and propelled over elevated guideways at speeds of 300 miles per hour. Maglev is not a new concept but is, however, receiving renewed interest. The objective of this workshop was to further promote these interest by bringing together a small group of specialists in Maglev technology to discuss Maglev research needs and to identify key research issues to the development of a successful Maglev system. The workshop was organized into four sessions based on the following technical areas: Materials, Testing, and Shielding; Magnet Design and Cryogenic Systems; Propulsion and Levitation Systems; and, System Control and Integration

  7. Space Station technology testbed: 2010 deep space transport

    Science.gov (United States)

    Holt, Alan C.

    1993-01-01

    A space station in a crew-tended or permanently crewed configuration will provide major R&D opportunities for innovative, technology and materials development and advanced space systems testing. A space station should be designed with the basic infrastructure elements required to grow into a major systems technology testbed. This space-based technology testbed can and should be used to support the development of technologies required to expand our utilization of near-Earth space, the Moon and the Earth-to-Jupiter region of the Solar System. Space station support of advanced technology and materials development will result in new techniques for high priority scientific research and the knowledge and R&D base needed for the development of major, new commercial product thrusts. To illustrate the technology testbed potential of a space station and to point the way to a bold, innovative approach to advanced space systems' development, a hypothetical deep space transport development and test plan is described. Key deep space transport R&D activities are described would lead to the readiness certification of an advanced, reusable interplanetary transport capable of supporting eight crewmembers or more. With the support of a focused and highly motivated, multi-agency ground R&D program, a deep space transport of this type could be assembled and tested by 2010. Key R&D activities on a space station would include: (1) experimental research investigating the microgravity assisted, restructuring of micro-engineered, materials (to develop and verify the in-space and in-situ 'tuning' of materials for use in debris and radiation shielding and other protective systems), (2) exposure of microengineered materials to the space environment for passive and operational performance tests (to develop in-situ maintenance and repair techniques and to support the development, enhancement, and implementation of protective systems, data and bio-processing systems, and virtual reality and

  8. Passengers waste production during flights.

    Science.gov (United States)

    Tofalli, Niki; Loizia, Pantelitsa; Zorpas, Antonis A

    2017-12-20

    We assume that during flights the amount of waste that is produced is limited. However, daily, approximately 8000 commercial airplanes fly above Europe's airspace while at the same time, more than 17,000 commercial flights exist in the entire world. Using primary data from airlines, which use the Larnaca's International Airport (LIA) in Cyprus, we have tried to understand why wastes are produced during a typical flight such as food waste, paper, and plastics, as well as how passengers affect the production of those wastes. The compositional analysis took place on 27 flights of 4 different airlines which used LIA as final destination. The evaluation indicated that the passenger's habits and ethics, and the policy of each airline produced different kinds of waste during the flights and especially food waste (FW). Furthermore, it was observed that the only waste management strategy that exists in place in the airport is the collection and the transportation of all those wastes from aircrafts and from the airport in the central unit for further treatment. Hence, this research indicated extremely difficulties to implement any specific waste minimization, or prevention practice or other sorting methods during the flights due to the limited time of the most flights (less than 3 h), the limited available space within the aircrafts, and the strictly safety roles that exist during the flights.

  9. Factor Analysis of Passenger Cars Using as a Taxi

    Directory of Open Access Journals (Sweden)

    Deriugin O.V.

    2016-05-01

    Full Text Available A procedure to select passenger cars has been proposed. The procedure helps substantiate choice of effective transportation means in accordance with taxi class to meet consumption requirements of those taking part in transportation process from the viewpoint of comfort, safety, and minimum expenditures in the context of such transportation type.

  10. Analysis of the quality of the whole journey (door-to-door) passenger expierence

    Energy Technology Data Exchange (ETDEWEB)

    Herrero Tomas, M.D.; Gonzalez Viosca, E.

    2016-07-01

    European cities increasingly face problems caused by transport and traffic. A key factor for all transport operators is the quality of the passenger experience as this particularly, affects the uptake of the service. A comprehensive study (METPEX FP7 EU project - www.metpex.eu) developed by a consortium of 16 European partners has analysed the quality of the whole journey (door-to-door) passenger experience, including private or individual forms transport and attending to specific need of users’ groups. For this purpose, a tool with a technological basis was used to collect data from 8 trial cities: Bucharest (Romania), Coventry (United Kingdom), Dublin (Ireland), Grevena (Greece), Rome (Italy), Stockholm (Sweden), Valencia (Spain) and Vilnius (Lithuania); and five FIA motorist networks countries. For a correct evaluation of quality experience, it was deployed a subset of key variables derived from the comprehensive set of potential satisfaction factors that were studied for each pilot city. In this paper, results of the travel experience are showed, including analysis of variables affecting behavior and feelings of passengers. (Author)

  11. High-speed and intercity passenger rail testing strategy.

    Science.gov (United States)

    2013-05-01

    This high-speed and intercity passenger rail (HSIPR) testing strategy addresses the requirements for testing of high-speed train sets and technology before introduction to the North American railroad system. The report documents the results of a surv...

  12. The use of advanced communications and internet technology in car transportation to facilitate improvements for both driver and passengers

    OpenAIRE

    Saftah, Rehab Omar

    2015-01-01

    People love and at the same time need to travel. The society grows and develops based on a distributed environment, and the people’s ability to move freely from one place to another is fundamental to keep it functional. Along with trains and commercial trucks for moving goods and materials, the car gives individuals the virtually unlimited ability to travel anywhere in the country in just a matter of hours or days. This thesis focuses on the usage of advanced communications internet techno...

  13. IMPROVEMENT OF LIFE SUPPORT SYSTEMS OF PASSENGER ROLLING STOCK: PATENT REVIEW

    Directory of Open Access Journals (Sweden)

    S. R. Kolesnykov

    2018-02-01

    Full Text Available Purpose. Inventors and researchers of the world are focused on improvements of basic life support systems including provision of quality microclimate parameters in a car of the rolling stock. The research is aimed at reviewing and analyzing patents in the field of climate comfort, heating, ventilation and air conditioning (CCHVAC of railway passenger cars (the chronological framework: 2011-2017 from the date of publication. Мethodology. During the study there were reviewed patents (foreign and domestic ones in the field of CCHVAC in passenger vehicles, in particular railway cars, their optimization and ways of managing them. Patent search was carried out according to certain search criteria: keywords, time frames and in various patent systems of the world. An interdisciplinary approach was used. Findings. Based on the search results, 157 patents were found, 21 documents of which were selected for analysis. Patents are systematized into three groups: "New technical and technological solutions in systems and functioning facilities of HVAC ", "New and improved solutions for HVAC system management in a vehicle", "Air ozonation in passenger cars". It is established that all patents have one of the aspects that have solutions to the issues of more environmentally friendly, energy efficient and safe application of CCHVAC systems in railway transport. Originality. It was proved a high level of link penetration in various technical fields, which include patents with CCHVAC. It is established that it is characteristic for them to designate the majority of patent solutions for use not in the purely railway industry, but in transport in general. Practical value. Confirmation of the high level of link penetration in various technical fields will make it possible to reflect technical problems with CCHVAC and technologies for their solution throughout the world. This will contribute to a more intensive technological upgrade in the improvement of life support

  14. Kansas Department of Transportation research & technology news, vol. 6 #2, December 2013.

    Science.gov (United States)

    2013-12-01

    Research & Technology News is a newsletter published by the Kansas Department of : Transportation, Bureau of Researchs Technology Transfer Section, in cooperation with : the Federal Highway Administration and the U.S. Department of Transportation.

  15. Consumer Views on Transportation and Advanced Vehicle Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Singer, Mark [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2015-09-01

    Vehicle manufacturers, U.S. Department of Energy laboratories, universities, private researchers, and organizations from countries around the globe are pursuing advanced vehicle technologies that aim to reduce gasoline and diesel consumption. This report details study findings of broad American public sentiments toward issues surrounding advanced vehicle technologies and is supported by the U.S. Department of Energy Vehicle Technology Office (VTO) in alignment with its mission to develop and deploy these technologies to improve energy security, increase mobility flexibility, reduce transportation costs, and increase environmental sustainability. Understanding and tracking consumer sentiments can influence the prioritization of development efforts by identifying barriers to and opportunities for broad acceptance of new technologies. Predicting consumer behavior toward developing technologies and products is inherently inexact. A person's stated preference given in an interview about a hypothetical setting may not match the preference that is demonstrated in an actual situation. This difference makes tracking actual consumer actions ultimately more valuable in understanding potential behavior. However, when developing technologies are not yet available and actual behaviors cannot be tracked, stated preferences provide some insight into how consumers may react in new circumstances. In this context this report provides an additional source to validate data and a new resource when no data are available. This report covers study data captured from December 2005 through June 2015 relevant to VTO research efforts at the time of the studies. Broadly the report covers respondent sentiments about vehicle fuel economy, future vehicle technology alternatives, ethanol as a vehicle fuel, plug-in electric vehicles, and willingness to pay for vehicle efficiency. This report represents a renewed effort to publicize study findings and make consumer sentiment data available to

  16. The Simultaneous Vehicle Scheduling and Passenger Service Problem

    DEFF Research Database (Denmark)

    Petersen, Hanne Løhmann; Larsen, Allan; Madsen, Oli B.G.

    2013-01-01

    , by modifying the timetable. The planning approach is referred to as the simultaneous vehicle scheduling and passenger service problem (SVSPSP). The SVSPSP is modelled as an integer programming problem and solved using a large neighborhood search metaheuristic. The proposed framework is tested on data inspired......Passengers using public transport systems often experience waiting times when transferring between two scheduled services. In this paper we propose a planning approach that seeks to obtain a favourable trade-off between the two contrasting objectives, passenger service and operating cost...

  17. The Simultaneous Vehicle Scheduling and Passenger Service Problem

    DEFF Research Database (Denmark)

    Petersen, Hanne Løhmann; Larsen, Allan; Madsen, Oli B.G.

    modifications of the timetable during the vehicle scheduling phase. This planning approach is referred to as the Simultaneous Vehicle Scheduling and Passenger Service Problem (SVSPSP). The SVSPSP is solved using a large neighbourhood search metaheuristic. The proposed framework is tested on data inspired......Passengers using public transport systems often experience waiting times when transferring between two scheduled services. We propose a planning approach which seeks to obtain a favorable trade-off between the conflicting objectives passenger service and operating cost, by allowing some moderate...

  18. The Trojan. [supersonic transport

    Science.gov (United States)

    1992-01-01

    The Trojan is the culmination of thousands of engineering person-hours by the Cones of Silence Design Team. The goal was to design an economically and technologically viable supersonic transport. The Trojan is the embodiment of the latest engineering tools and technology necessary for such an advanced aircraft. The efficient design of the Trojan allows for supersonic cruise of Mach 2.0 for 5,200 nautical miles, carrying 250 passengers. The per aircraft price is placed at $200 million, making the Trojan a very realistic solution for tomorrows transportation needs. The following is a detailed study of the driving factors that determined the Trojan's super design.

  19. Fixed Wing Project: Technologies for Advanced Air Transports

    Science.gov (United States)

    Del Rosario, Ruben; Koudelka, John M.; Wahls, Richard A.; Madavan, Nateri

    2014-01-01

    The NASA Fundamental Aeronautics Fixed Wing (FW) Project addresses the comprehensive challenge of enabling revolutionary energy efficiency improvements in subsonic transport aircraft combined with dramatic reductions in harmful emissions and perceived noise to facilitate sustained growth of the air transportation system. Advanced technologies and the development of unconventional aircraft systems offer the potential to achieve these improvements. Multidisciplinary advances are required in aerodynamic efficiency to reduce drag, structural efficiency to reduce aircraft empty weight, and propulsive and thermal efficiency to reduce thrust-specific energy consumption (TSEC) for overall system benefit. Additionally, advances are required to reduce perceived noise without adversely affecting drag, weight, or TSEC, and to reduce harmful emissions without adversely affecting energy efficiency or noise.The presentation will highlight the Fixed Wing project vision of revolutionary systems and technologies needed to achieve these challenging goals. Specifically, the primary focus of the FW Project is on the N+3 generation; that is, vehicles that are three generations beyond the current state of the art, requiring mature technology solutions in the 2025-30 timeframe.

  20. Advanced Technology Subsonic Transport Study: N+3 Technologies and Design Concepts

    Science.gov (United States)

    Raymer, Daniel P.; Wilson, Jack; Perkins, H. Douglas; Rizzi, Arthur; Zhang, Mengmeng; RamirezPuentes, Alfredo

    2011-01-01

    Conceptual Research Corporation, the Science of the Possible, has completed a two-year study of concepts and technologies for future airliners in the 180-passenger class. This NASA-funded contract was primarily focused on the ambitious goal of a 70 percent reduction in fuel consumption versus the market-dominating Boeing 737-800. The study is related to the N+3 contracts awarded in 2008 by NASA s Aeronautics Research Mission Directorate to teams led by Boeing, GE Aviation, MIT, and Northrop Grumman, but with more modest goals and funding. CRC s contract featured a predominant emphasis on propulsion and fuel consumption, but since fuel consumption depends upon air vehicle design as much as on propulsion technology, the study included notional vehicle design, analysis, and parametric studies. Other NASA goals including NOx and noise reduction are of long-standing interest but were not highlighted in this study, other than their inclusion in the propulsion system provided to CRC by NASA. The B-737-800 was used as a benchmark, parametric tool, and design point of departure. It was modeled in the RDS-Professional aircraft design software then subjected to extensive parametric variations of parasitic drag, drag-due-to-lift, specific fuel consumption, and unsized empty weight. These studies indicated that the goal of a 70 percent reduction in fuel consumption could be attained with roughly a 30 percent improvement in all four parameters. The results were then fit to a Response Surface and coded for ease of use in subsequent trade studies. Potential technologies to obtain such savings were identified and discussed. More than 16 advanced concept designs were then prepared, attempting to investigate almost every possible emerging concept for application to this class airliner. A preliminary assessment of these concepts was done based on their total wetted area after design normalization of trimmed maximum lift. This assessment points towards a Tailless Airliner concept which

  1. 75 FR 36300 - Enhancing Airline Passenger Protections

    Science.gov (United States)

    2010-06-25

    ...The Department of Transportation is clarifying its notice of proposed rulemaking (NPRM) published in the Federal Register on June 8, 2010, which, among other issues, solicits comments on options to provide greater access to air travel for persons with peanut allergies. The June 8 document also proposes action to strengthen the rights of air travelers in the event of oversales, flight cancellations and long delays, and to ensure that passengers have accurate and adequate information to make informed decisions when selecting flights.

  2. 75 FR 45562 - Enhancing Airline Passenger Protections

    Science.gov (United States)

    2010-08-03

    ...This action extends the comment period for an NPRM on enhancing airline passenger protections that was published in the Federal Register on June 8, 2010. The Department of Transportation is extending the period for interested persons to submit comments on this rulemaking from August 9, 2010, to September 23, 2010. This extension is a result of requests from a number of airline associations, one airport association, and two airlines to extend the comment period for the proposal.

  3. Essentials of energy technology sources, transport, storage, conservation

    CERN Document Server

    Fricke, Jochen

    2013-01-01

    An in-depth understanding of energy technology, sources, conversion, storage, transport and conservation is crucial for developing a sustainable and economically viable energy infrastructure. This need, for example, is addressed in university courses with a special focus on the energy mix of renewable and depletable energy resources. Energy makes our lives comfortable, and the existence of amenities such as heaters, cars, warm water, household appliances and electrical light is characteristic for a developed economy. Supplying the industrial or individual energy consumer with energy 24 hours

  4. SBIR Advanced Technologies in Aviation and Air Transportation System 2016

    Science.gov (United States)

    Nguyen, Hung D.; Steele, Gynelle C.; Kaszeta, Richard W.; Gold, Calman; Corke, Thomas C.; McGowan, Ryan; Matlis, Eric; Eichenlaub, Jesse; Davis, Joshua T.; Shah, Parthiv N.

    2017-01-01

    This report is intended to provide a broad knowledge of various topics associated with NASA's Aeronautics Research Mission Directorate (ARMD), with particular interest on the NASA SBIR contracts awarded from 2011-2012 executed by small companies. The content of this report focuses on the high-quality, cutting-edge research that will lead to revolutionary concepts, technologies, and capabilities that enable radical change to both the airspace system and the aircraft that fly within it, facilitating a safer, more environmentally friendly, and more efficient air transportation system.

  5. Policies and Predictions for a Low-Carbon Transition by 2050 in Passenger Vehicles in East Asia: Based on an Analysis Using the E3ME-FTT Model

    Directory of Open Access Journals (Sweden)

    Aileen Lam

    2018-05-01

    Full Text Available In this paper we apply a model of technological diffusion, Future Technology Transformations in the Transport Sector (FTT: Transport, linked to the E3ME macroeconomic model, to study possible future technological transitions in personal passenger transport in four East Asian countries. We assess how targeted policies could impact on these transitions by defining four scenarios based on policies that aim to reduce emissions from transport. For each country we find that an integrated approach of tax incentives, subsidies, regulations (fuel economy efficiency, kick-start programs and biofuel programs yield the most significant emission reductions because, when combined, they accelerate effectively the diffusion of electric vehicles in the region.

  6. Sustainable ground transportation – review of technologies, challenges and opportunities

    Energy Technology Data Exchange (ETDEWEB)

    Agarwal, Ramesh K. [Department of Mechanical Engineering and Materials Science, Washington University, St. Louis, MO 63130 (United States)

    2013-07-01

    Currently there are nearly 750 million ground vehicles in service worldwide. They are responsible for 50% of petroleum (oil) consumption and 60% of all greenhouse gas (GHG) emissions worldwide. The number of vehicles is forecasted to double by 2050. Therefore the environmental issues such as noise, emissions and fuel burn have become important for energy and environmental sustainability. This paper provides an overview of specific energy and environmental issues related to ground transportation. The technologies related to reduction in energy requirements such as reducing the vehicle mass by using the high strength low weight materials and reducing the viscous drag by active flow control and smoothing the operational profile, and reducing the contact friction by special tire materials are discussed along with the portable energy sources for reducing the GHG emissions such as low carbon fuels (biofuels), Lithium-ion batteries with high energy density and stability, and fuel cells. The technological challenges and opportunities for innovations are discussed.

  7. Field transportable beta spectrometer. Innovative technology summary report

    International Nuclear Information System (INIS)

    1998-12-01

    The objective of the Large-Scale Demonstration Project (LSDP) is to select and demonstrate potentially beneficial technologies at the Argonne National Laboratory-East (ANL) Chicago Pile-5 Test Reactor (CP-5). The purpose of the LSDP is to demonstrate that by using innovative and improved deactivation and decommissioning (D and D) technologies from various sources, significant benefits can be achieved when compared to baseline D and D technologies. One such capability being addressed by the D and D Focus Area is rapid characterization for facility contaminants. The technology was field demonstrated during the period January 7 through January 9, 1997, and offers several potential benefits, including faster turn-around time, cost reduction, and reduction in secondary waste. This report describes a PC controlled, field-transportable beta counter-spectrometer which uses solid scintillation coincident counting and low-noise photomultiplier tubes to count element-selective filters and other solid media. The dry scintillation counter used in combination with an element-selective technology eliminates the mess and disposal costs of liquid scintillation cocktails. Software in the instrument provides real-time spectral analysis. The instrument can detect and measure Tc-99, Sr-90, and other beta emitters reaching detection limits in the 20 pCi range (with shielding). Full analysis can be achieved in 30 minutes. The potential advantages of a field-portable beta counter-spectrometer include the savings gained from field generated results. The basis for decision-making is provided with a rapid turnaround analysis in the field. This technology would be competitive with the radiometric analysis done in fixed laboratories and the associated chain of custody operations

  8. Kajian Keamanan Pengoperasian Public Transport Tinjauan Terhadap Kekuatan Rangka Body Bus

    OpenAIRE

    Sudiro, B. M

    2010-01-01

    In order to meet the safety and security of the public transportation, design specification of construction body bus or bus frame structures should have an appropriate structural strength and comply with standard design including the safety factor and selection of material besides static and dynamic testing of the part of body bus. It is also realized that a bus carrying passengers have to give secure to the passengers also driver.The fact that a technology concerning with metal works indus...

  9. ADA access to passenger vessels : finding safety equivalence solutions for weathertight doors with coamings : Phase 2 : a risk management approach to reconfiguration design solutions

    Science.gov (United States)

    2005-03-01

    This report examines a risk management methodology to provide for both marine safety and disability access at weathertight doors into passenger accommodation spaces on U.S. passenger vessels. The Architectural and Transportation Barriers Compliance B...

  10. Implementation of advanced technologies and other means in dangerous freight transportation

    Directory of Open Access Journals (Sweden)

    N. Batarlienė

    2007-12-01

    Full Text Available This article examines types of modern technologies application possibilities in dangerous freight transportation. It is noted that the solution to transport technology problems is based on the improvement of technological supply, the rational usage of informational modeling methodology of the whole transportation process. The aspects of mobile solution of public information and transport are named in this paper. The article presents concrete vehicles and freight tracking on their trips analysis, the principles and methods of their operation. Tracking and localization systems are playing a great role in the transportation of dangerous freight. The newly developed remote identification system for transport facilities and freight are presented.

  11. Assessing Rates of Global Warming Emissions from Port- Fuel Injection and Gasoline Direct Injection Engines in Light-Duty Passenger Vehicles

    Science.gov (United States)

    Short, D.; , D., Vi; Durbin, T.; Karavalakis, G.; Asa-Awuku, A. A.

    2013-12-01

    Passenger vehicles are known emitters of climate warming pollutants. CO2 from automobile emissions are an anthropogenic greenhouse gas (GHG) and a large contributor to global warming. Worldwide, CO2 emissions from passenger vehicles are responsible for 11% of the total CO2 emissions inventory. Black Carbon (BC), another common vehicular emission, may be the second largest contributor to global warming (after CO2). Currently, 52% of BC emissions in the U.S are from the transportation sector, with ~10% originating from passenger vehicles. The share of pollutants from passenger gasoline vehicles is becoming larger due to the reduction of BC from diesel vehicles. Currently, the majority of gasoline passenger vehicles in the United States have port- fuel injection (PFI) engines. Gasoline direct injection (GDI) engines have increased fuel economy compared to the PFI engine. GDI vehicles are predicted to dominate the U.S. passenger vehicle market in the coming years. The method of gasoline injection into the combustion chamber is the primary difference between these two technologies, which can significantly impact primary emissions from light-duty vehicles (LDV). Our study will measure LDV climate warming emissions and assess the impact on climate due to the change in U.S vehicle technologies. Vehicles were tested on a light- duty chassis dynamometer for emissions of CO2, methane (CH4), and BC. These emissions were measured on F3ederal and California transient test cycles and at steady-state speeds. Vehicles used a gasoline blend of 10% by volume ethanol (E10). E10 fuel is now found in 95% of gasoline stations in the U.S. Data is presented from one GDI and one PFI vehicle. The 2012 Kia Optima utilizes GDI technology and has a large market share of the total GDI vehicles produced in the U.S. In addition, The 2012 Toyota Camry, equipped with a PFI engine, was the most popular vehicle model sold in the U.S. in 2012. Methane emissions were ~50% lower for the GDI technology

  12. Designing Train Passenger Seat by Kansei Engineering in Indonesia

    Directory of Open Access Journals (Sweden)

    Hapsari Sakya Nabila

    2017-01-01

    Full Text Available Public transport adoption is still major problem in Indonesia. Integrating impression and emotion to service may change the image of public transport, leading to fast adoption rate. As product development technique, Kansei Engineering is well known to facilitate that integration. This paper communicates the implementation of Kansei Engineering (KE in designing train passenger seat in Indonesia. The train between Bandung-Solo (8 hours journey was chosen to be the investigated object. The train was selected to be refurbished by introducing a new passenger seat design, emphasizing on the improvement of passenger experience. As the first step of KE type I technique, travel experience of the existing passengers were taken into the consideration for selecting Kansei words. It was found that the relevant Kansei words to design passenger train seat in Indonesia were: comfort, people-friendly, multifunction, safe, soft, spacious, relaxing, superior, maintainable, strong, producible, minimalist, attractive, modern, unique, and durable. Upon understanding the semantic meaning of those words, physical properties and technical specification were produced by consulting to the related members. Finally, a passenger seat with synthetic leather cover, modular design, foldable table, individual power point, bluesilver color, and adjusted to Indonesian’s anthropometry data was proposed as the final design

  13. Status of solid polymer electrolyte fuel cell technology and potential for transportation applications

    Science.gov (United States)

    McElroy, J. F.; Nuttall, L. J.

    The solid polymer electrolyte (SPE) fuel cell represents the first fuel cell technology known to be used operationally. Current activities are mainly related to the development of a space regenerative fuel cell system for energy storage on board space stations, or other large orbiting vehicles and platforms. During 1981, a study was performed to determine the feasibility of using SPE fuel cells for automotive or other vehicular applications, using methanol as the fuel. The results of this study were very encouraging. Details concerning a conceptual automotive fuel cell power plant study are discussed, taking into account also a layout of major components for compact passenger car installation.

  14. Aviation safety and automation technology for subsonic transports

    Science.gov (United States)

    Albers, James A.

    1991-01-01

    Discussed here are aviation safety human factors and air traffic control (ATC) automation research conducted at the NASA Ames Research Center. Research results are given in the areas of flight deck and ATC automations, displays and warning systems, crew coordination, and crew fatigue and jet lag. Accident investigation and an incident reporting system that is used to guide the human factors research is discussed. A design philosophy for human-centered automation is given, along with an evaluation of automation on advanced technology transports. Intelligent error tolerant systems such as electronic checklists are discussed along with design guidelines for reducing procedure errors. The data on evaluation of Crew Resource Management (CRM) training indicates highly significant positive changes in appropriate flight deck behavior and more effective use of available resources for crew members receiving the training.

  15. Accessible Transportation Technologies Research Initiative (ATTRI) : User Needs Assessment: Stakeholder Engagement Report.

    Science.gov (United States)

    2016-05-01

    The Accessible Transportation Technologies Research Initiative (ATTRI) is a joint U.S. Department of Transportation (U.S. DOT) initiative that is co-led by the Federal Highway Administration (FHWA) and the Federal Transit Administration (FTA). ATTRI ...

  16. FUEL/CARBON PRICE VS. ABATEMENT TECHNOLOGY IN FREIGHT TRANSPORT

    Directory of Open Access Journals (Sweden)

    Eugen Ferdinand Spangenberg

    2017-12-01

    Full Text Available The current situation is the exponential increase in greenhouse gases (GHG, which is mainly caused by industrial and transport activities. The recent Paris agreement in 2015 (Framework Convention on Climate Change COP21, UNFCCC made it clear to everyone that CO2 emissions are to be limited in all areas of life. Alternative fuels with a lower environmental impact than carbon (CO2 emissions are hard to find if the overall footprint is to be taken into account. Nevertheless, there are some fuels that have less impact on climate change. One the other hand, the production of biofuels is a controversial matter, although it is a viable alternative to emissions reduction. CNG or LNG-powered vehicles are also better in terms of environmental pollution, but are hardly better with regard to CO2 impact when a Life Cycle Assessment (LCA is carried out. LNG (liquid natural gas, for example, is the future fuel in the maritime sector because of the stricter environmental regulations (SOx,NOx in the shipping industry. The battery-powered vehicle is another example of an environmentally friendly solution. The afore-mentioned measures can be considered as “abatement“ necessary in order to limit CO2 impact. The study shows that there are significant differences in the environmental impact between transport systems and the corresponding drive-system or associated energy base. The polluter should pay, which is a common basic principle in economic research. The Emission Trading Scheme (ETS has been introduced in order to ensure a reduction in CO2 output – emissions come with a price tag. An overall view is necessary, both en-vironmental and economic impact must be reconciled (cf. Spangenberg - TQI. The future viability of the transport system as we know it may change significantly over time if new environmental requirements or e.g. CO2 taxes or ETS are introduced in the freight sector. The abatement of CO2 should be effected primarily through technological

  17. Decomposition analysis of CO2 emissions from passenger cars: The cases of Greece and Denmark

    International Nuclear Information System (INIS)

    Papagiannaki, Katerina; Diakoulaki, Danae

    2009-01-01

    The paper presents a decomposition analysis of the changes in carbon dioxide (CO 2 ) emissions from passenger cars in Denmark and Greece, for the period 1990-2005. A time series analysis has been applied based on the logarithmic mean Divisia index I (LMDI I) methodology, which belongs to the wider family of index decomposition approaches. The particularity in road transport that justifies a profound analysis is its remarkably rapid growth during the last decades, followed by a respective increase in emissions. Denmark and Greece have been selected based on the challenging differences of specific socio-economic characteristics of these two small EU countries, as well as on the availability of detailed data used in the frame of the analysis. In both countries, passenger cars are responsible for half of the emissions from road transport as well as for their upward trend, which provokes the implementation of a decomposition analysis focusing exactly on this segment of road transport. The factors examined in the present decomposition analysis are related to vehicles ownership, fuel mix, annual mileage, engine capacity and technology of cars. The comparison of the results discloses the differences in the transportation profiles of the two countries and reveals how they affect the trend of CO 2 emissions.

  18. Modernisation of passengers stock deposit at the regional division Braşov

    Directory of Open Access Journals (Sweden)

    Elena SIMA

    2010-08-01

    Full Text Available The purpose of this paper is to present the latest accomplishments at the Regional Division Brasov regarding the modernisation of stock depot for passengers but also future programs that will continue this process. The rolling stock used in passenger transport was followed: passenger wagons, sleeping wagons, diesel engines, electric engines.   Passenger transport organisation should aim the accomplishment of the following requirements: ensuring passengers’ security on the route and in stations; reducing travel time (by increasing trains’ speed, choosing the best routes, reducing stops at stations, ensuring certain fast links at railway junctions; intensive usage of rolling stock, of fixed installations; the appropriate combination of freight with passenger transport, passengers’ good serving at stations and trains, especially by ensuring a timetable which would provide convenient hours and reliable connections at railway junctions.

  19. Building Airline Passenger Loyalty Through an Understanding of Customer Value: A Relationship Segmentation of Airline Passengers

    OpenAIRE

    Leick, Ryan

    2007-01-01

    This thesis explores means of restoring profitability to the airline industry by cultivating intrinsically motivated brand loyalty between passengers and airlines in today’s fragile environment. The air transport industry is caught up in traditional transaction-based strategies. Airlines rely on archaic frequent flyer programs (FFPs) to maintain loyalty which deter customers from choosing alternative airlines by increasing the cost associated with switching. In contrast, oth...

  20. 78 FR 16036 - Service Level Environmental Impact Statement for the Texas Oklahoma Passenger Rail Study Corridor...

    Science.gov (United States)

    2013-03-13

    ... transportation modes such as auto, air travel, intercity bus, and existing rail and the physical characteristics... alternatives to provide higher speed passenger rail service to meet future intercity travel demand and to... truck traffic demand, intercity truck traffic demand, and passenger travel demand compete for highway...

  1. 14 CFR 399.32 - Zone of limited suspension for domestic passenger fares.

    Science.gov (United States)

    2010-01-01

    ... TRANSPORTATION (AVIATION PROCEEDINGS) POLICY STATEMENTS STATEMENTS OF GENERAL POLICY Policies Relating to Rates and Tariffs § 399.32 Zone of limited suspension for domestic passenger fares. (a) Applicability. This section sets forth the Board's policy on passenger fares for scheduled service by certificated air...

  2. ANALYTICAL ESTIMATION OF MINIMUM AND MAXIMUM TIME EXPENDITURES OF PASSENGERS AT AN URBAN ROUTE STOP

    Directory of Open Access Journals (Sweden)

    Gorbachov, P.

    2013-01-01

    Full Text Available This scientific paper deals with the problem related to the definition of average time spent by passengers while waiting for transport vehicles at urban stops as well as the results of analytical modeling of this value at traffic schedule unknown to the passengers and of two options of the vehicle traffic management on the given route.

  3. New technologies in Islamic countries. Power engineering, transport, oil industry, machinery construction, building construction and information technologies problems

    International Nuclear Information System (INIS)

    Sharipova, N.S.

    1999-01-01

    The published proceedings contain brief presentations concerning new technologies in power engineering, transport, oil industry, machinery construction, building construction and information technologies presented to the International scientific and technical conference: New technologies in Islamic countries, which was organized within frame work of 6 General Assembly of Federation of engineering Institutes of Islamic countries (FEIIC). (author)

  4. New technologies in Islamic countries. Power engineering, transport, oil industry, machinery construction, building construction and information technologies problems

    International Nuclear Information System (INIS)

    Sharipova, N.S.

    1999-01-01

    This issue contains papers, which reflect the most important achievements of new technologies in power engineering, transport, oil industry, machinery construction, building construction and information technologies presented to the International Scientific and Technical Conference: New technologies in Islamic countries, which was organized within frame work of 6 General Assembly of Federation of Engineering Institutes of Islamic Countries (FEIIC). (author)

  5. Intelligent products for enhancing the utilization of tracking technology in transportation

    NARCIS (Netherlands)

    Meyer, Gerben G.; Buijs, Paul; Szirbik, Nick B.; Wortmann, J.C.

    2014-01-01

    Purpose – Many transportation companies struggle to effectively utilize the information provided by tracking technology for performing operational control. The research as presented in this paper aims to identify the problems underlying the inability to utilize tracking technology within this

  6. Research on Demand for Bus Transport and Transport Habits of High School Students in Žilina Region

    Directory of Open Access Journals (Sweden)

    Konečný Vladimír

    2017-11-01

    Full Text Available The paper deals with the analysis of demand for bus transport to examine determinants of demand and practices of high school students based on survey of their transport habits in Žilina Region. Transport habits of students are individual and variable in time. This group of passengers is dependent on public passenger transport services because of their travelling to schools. Significant part of demand for public passenger transport is also formed by this this group of passengers. The knowledge of student's transport habits may help in process of adaptation of offering and quality of transport serviceability what may subsequently stabilize demand for public passenger transport.

  7. Rural public transportation technologies : user needs and applications

    Science.gov (United States)

    1998-09-01

    Rural Intelligent Transportation Systems (ITS) have the ability to meet the needs of travelers in and through rural areas as well as the needs of agencies responsible for the operation and maintenance of rural transportation systems. To assist in the...

  8. Rural Public Transportation Technologies: User Needs and Applications. Tech Brief.

    Science.gov (United States)

    1998-09-01

    Rural Intelligent Transportation Systems (ITS) have the ability to meet the needs of travelers in and through rural areas as well as the needs of agencies responsible for the operation and maintenance of rural transportation systems. To assist in the...

  9. Long-term Energy Efficiency Improvement for Transport, Technology Assessments

    NARCIS (Netherlands)

    Van Binsbergen, A.J.; Erkens, A.; Hamel, B.

    1994-01-01

    In part one of this report, general transport and transport-flow measures are described. By using other modes of transport than road-vehicles, it is possible to save energy. An advanced park-and-ride system can lead to a 27% reduction in energy use per passengerkilometre; in 2040 at most 10% of the

  10. 49 CFR 39.39 - How do PVOs ensure that passengers with disabilities are able to use accessible cabins?

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 1 2010-10-01 2010-10-01 false How do PVOs ensure that passengers with disabilities are able to use accessible cabins? 39.39 Section 39.39 Transportation Office of the Secretary of... to Services § 39.39 How do PVOs ensure that passengers with disabilities are able to use accessible...

  11. An RFID-based luggage and passenger tracking system for airport security control applications

    Science.gov (United States)

    Vastianos, George E.; Kyriazanos, Dimitris M.; Kountouriotis, Vassilios I.; Thomopoulos, Stelios C. A.

    2014-06-01

    Market analysis studies of recent years have shown a steady and significant increase in the usage of RFID technology. Key factors for this growth were the decreased costs of passive RFIDs and their improved performance compared to the other identification technologies. Besides the benefits of RFID technologies into the supply chains, warehousing, traditional inventory and asset management applications, RFID has proven itself worth exploiting on experimental, as well as on commercial level in other sectors, such as healthcare, transport and security. In security sector, airport security is one of the biggest challenges. Airports are extremely busy public places and thus prime targets for terrorism, with aircraft, passengers, crew and airport infrastructure all subject to terrorist attacks. Inside this labyrinth of security challenges, the long range detection capability of the UHF passive RFID technology can be turned into a very important tracking tool that may outperform all the limitations of the barcode tracking inside the current airport security control chain. The Integrated Systems Lab of NCSR Demokritos has developed an RFID based Luggage and Passenger tracking system within the TASS (FP7-SEC-2010-241905) EU research project. This paper describes application scenarios of the system categorized according to the structured nature of the environment, the system architecture and presents evaluation results extracted from measurements with a group of different massive production GEN2 UHF RFID tags that are widely available in the world market.

  12. 14 CFR 91.517 - Passenger information.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Passenger information. 91.517 Section 91... Multiengine Airplanes and Fractional Ownership Program Aircraft § 91.517 Passenger information. (a) Except as... belts and when smoking is prohibited. (c) If passenger information signs are installed, no passenger or...

  13. GREY STATISTICS METHOD OF TECHNOLOGY SELECTION FOR ADVANCED PUBLIC TRANSPORTATION SYSTEMS

    Directory of Open Access Journals (Sweden)

    Chien Hung WEI

    2003-01-01

    Full Text Available Taiwan is involved in intelligent transportation systems planning, and is now selecting its prior focus areas for investment and development. The high social and economic impact associated with which intelligent transportation systems technology are chosen explains the efforts of various electronics and transportation corporations for developing intelligent transportation systems technology to expand their business opportunities. However, there has been no detailed research conducted with regard to selecting technology for advanced public transportation systems in Taiwan. Thus, the present paper demonstrates a grey statistics method integrated with a scenario method for solving the problem of selecting advanced public transportation systems technology for Taiwan. A comprehensive questionnaire survey was conducted to demonstrate the effectiveness of the grey statistics method. The proposed approach indicated that contactless smart card technology is the appropriate technology for Taiwan to develop in the near future. The significance of our research results implies that the grey statistics method is an effective method for selecting advanced public transportation systems technologies. We feel our information will be beneficial to the private sector for developing an appropriate intelligent transportation systems technology strategy.

  14. Violence Against Drivers and Conductors in the Road Passenger ...

    African Journals Online (AJOL)

    This cross-sectional study examined the extent, nature and risk factors of workplace violence in the road passenger transport sector in Maputo, the capital city of Mozambique. A random sample of 504 participants was selected from a population of 2 618 registered bus, minibus, and taxi drivers/conductors. The results ...

  15. EVs and post 2020 CO2 targets for passenger cars

    NARCIS (Netherlands)

    Smokers, R.T.M.; Verbeek, M.; Zyl, S. van

    2013-01-01

    This paper analyses what post 2020 targets may be necessary for the European CO2 legislation for passenger cars in order to reach the overall sectoral goal of 60% reduction of transport's greenhouse gas emissions by 2050 relative to 1990, as defined in the European Commission's White Paper. The

  16. Chicago to Iowa City intercity passenger rail route : business plan.

    Science.gov (United States)

    2011-03-21

    This business plan describes the methods by which the Iowa Department of Transportation (DOT will partner with Iowa counties and cities to fund Iowas share of the operating and maintenance cost for the Chicago-Iowa City passenger-rail service, an ...

  17. Environmentally sustainable transport in the CEI countries

    International Nuclear Information System (INIS)

    Thaler, R.; Wiederkehr, P.

    2004-01-01

    Moving people and freight in an environmentally sustainable manner that reduces environmental pollution and health hazards is a key challenge for transport and environment policies in Europe. Present mobility patterns of passenger and freight transport in Central and Eastern Europe do not correspond to the objectives of sustainable development. This paper presents the results of a transport futures study for the CEI region as a whole using backcasting methodology with long-term sustainability criteria to be met by 2030. Achieving environmentally sustainable transport (EST) doesn't mean less transport and mobility than we have today, but it means primarily maintaining a balanced modal split that results in less environmental and health impacts than it would be under projected future trends. Rail, trams, busses and new forms of flexible inter-modal public transport mobility would have to take a large share and rail transport for passenger and freight as well as inland shipping would have to be nearly doubled by 2030 while road freight could still increase if it is based on alternative fuels reducing its impacts. Technological advancements for passenger cars and lorries, fuels and infrastructure will play an important part to achieve EST, but also ''smart'' mobility management (e.g. transport avoidance, increasing load factors and modal shift), innovative mobility services and freight logistics would be critical. The implementation of these policies and strategies will require coherent and comprehensive packages of instruments and measures, including: economic instruments, regulatory instruments, changes in infrastructure investment, mobility management, information and education programmes as well as better integration of land use, transport and environment policies. Realising EST will provide new opportunities for businesses to develop and invest in innovative solutions for passenger and freight transport. Overall, achieving EST would constitute a net benefit for

  18. Passenger train emergency systems : development of prototype railEXODUS software for U.S. passenger rail car egress.

    Science.gov (United States)

    2014-11-01

    The Federal Railroad Administration (FRA), U.S. Department of Transportation (U.S. DOT), is sponsoring a research program, which includes investigation of the applicability of time-based egress performance requirements to U.S. passenger rail cars. Th...

  19. USING RFID AND GIS TECHNOLOGIES FOR ADVANCED LUGGAGE TRACKING

    Directory of Open Access Journals (Sweden)

    Zoltan KATO

    2015-06-01

    Full Text Available By purchasing a plane ticket or a cargo service, the passenger or the customer signs a contract with the airline company. From that moment on the airline company is responsible for all aspects of air travel, including the passenger' luggage (recording, handling to / from the aircraft etc.. Safe transport of passengers' luggage or cargo packages on airlines raises numerous problems for airlines and requires flexible, efficient solutions, appropriate to the specific requirements of each client. Annually millions of luggages get lost in airports around the world. This causes inconvenience to passengers and loss of resources and additional costs for the airlines. The aim of this paper is to examine how RFID(Radio Frequency Identification technology could be useful for advanced shipment tracking (Track and Trace in the airlines industry, by using rewritable passive RFID tags.

  20. Aviation security : TSA is increasing procurement and deployment of the advanced imaging technology, but challenges to this effort and other areas of aviation security remain : testimony before the Subcommittee on Transportation Security and Infrastructur

    Science.gov (United States)

    2010-03-17

    The attempted bombing of Northwest flight 253 highlighted the importance of detecting improvised explosive devices on passengers. This testimony focuses on (1) the Transportation Security Administrations (TSA) efforts to procure and deploy advance...

  1. NPS Transit System Passenger Boardings Study: Converting Ticket Sales to Passenger Boardings.

    Science.gov (United States)

    2016-01-01

    This report examines the reporting of passenger boardings (unlinked passenger trips) by NPS transit systems that use a ticket sales conversion methodology. By studying and validating the park units' passenger boarding methodology from converting tick...

  2. Beyond Traffic 2045 Reimagining Transportation: Technology, Disruptive Innovation, and the Future of Transportation

    Science.gov (United States)

    2016-06-01

    This report summarizes key findings from the Beyond Traffic 2045 Reimagining Transportation thought leadership speaker series held at Volpe, the National Transportation Systems Center, in the fall and winter of 2015.

  3. Econometric Forecasting Models for Air Traffic Passenger of Indonesia

    Directory of Open Access Journals (Sweden)

    Viktor Suryan

    2017-01-01

    Full Text Available One of the major benefits of the air transport services operating in bigger countries is the fact that they provide a vital social economic linkage. This study is an attempt to establish the determinants of the passenger air traffic in Indonesia. The main objective of the study is to determine the economic variables that affect the number of airline passengers using the econometrics model of projection with an emphasis on the use of panel data and to determine the economic variables that affect the number of airline passengers using the econometrics model of projection with an emphasis on the use of time series data. This research also predicts the upcoming number of air traffic passenger until 2030. Air transportation and the economic activity in a country are interdependent. This work first uses the data at the country level and then at the selected airport level for review. The methodology used in this study has adopted the study for both normal regression and panel data regression techniques. Once all these steps are performed, the final equation is taken up for the forecast of the passenger inflow data in the Indonesian airports. To forecast the same, the forecasted numbers of the GDP (Gross Domestic Product and population (independent variables were chosen as a part of the literature review exercise are used. The result of this study shows the GDP per capita have significant related to a number of passengers which the elasticity 2.23 (time-series data and 1.889 for panel data. The exchange rate variable is unrelated to a number of passengers as shown in the value of elasticity. In addition, the total of population gives small value for the elasticity. Moreover, the number of passengers is also affected by the dummy variable (deregulation. With three scenarios: low, medium and high for GDP per capita, the percentage of growth for total number of air traffic passenger from the year 2015 to 2030 is 199.3%, 205.7%, and 320.9% respectively.

  4. TRANSPORTATION ECONOMIC TRENDS 2017

    Science.gov (United States)

    2018-01-05

    The report has eight chapters: - Chapter 1 introduces the Transportation Services Index, a monthly summary of freight and passenger movement. - Chapter 2 explains what transportation contributes to the American economy. - Chapter 3 examines the costs...

  5. Análise de modelo para projeto e desenvolvimento de serviços: uma pesquisa-ação em uma empresa de transporte rodoviário de passageiros Analysis of a service project and a development model: an action-research in a road passengers transport company

    Directory of Open Access Journals (Sweden)

    Vanessa Cristhina Gatto Chimendes

    2008-12-01

    Full Text Available O objetivo deste trabalho é analisar a implantação de um modelo de referência para o projeto e desenvolvimento de serviços em uma empresa de transporte rodoviário de passageiros. O intuito principal é minimizar três problemas relativos ao processo de desenvolvimento de serviços, pela ausência de: uma abordagem sistemática; documentos e registros que assegurem o controle do histórico de criação e melhorias para os serviços; testes documentados para verificação e validação do serviço desenvolvido. O modelo de referência foi escolhido por meio da análise de variância multivariada (Manova e a pesquisa empregou a estratégia da pesquisa-ação. O objeto de estudo foi o desenvolvimento de um serviço de bilhetagem eletrônica para uma empresa de transporte rodoviário. A pesquisa proporcionou recomendações para o aperfeiçoamento do modelo de referência e para a implantação de um processo sistemático de desenvolvimento de serviços para a empresa.The aim of this work is to analyze the implementation of a reference model for the project and development of services in a road passenger Transport Company. The main goals were to minimize three problems related to services development process: the absence of systematic approach, the absence of documents and records that assure the control of the services development description, and the absence of tests documentation for the verification and validation of the developed service. The reference model was chosen by using multivariate analysis of variance and the action-research strategy. A smart card payment system service development for the road passengers' transport was the object of study. The research provided recommendations of improvements for the reference model and for the implementation of a systematic service development process in the company.

  6. Research and technology strategy to help overcome the environmental problems in relation to transport

    International Nuclear Information System (INIS)

    Gwilliam, K.M.; Geerlings, H.

    1992-04-01

    This report has been prepared for the Strategic Analysis in Science and Technology Unit (SAST) of the Directorate-General for Science, Research and Development of the Commission of the European Communities. The background of the project to which this report contributes is a recognition of the growing impact of transportation on the environment, both as a function of growth in trade and as a leisure activity. The project is directed towards the elucidation of the many interactions between technology, transport and environment, in order to provide the Commission with (a) recommendations on the priorities for Community research and development in transport technology and other related areas of technology, and (b) an understanding of the implications of technological change on policy options, within the Community with regard to transport and environment and other related areas, such as energy and regional planning

  7. Convenient Airports: Point of View of the Passengers

    Science.gov (United States)

    Magri, Adival Aparecido, Jr.; Alves, Claudio Jorge Pinto

    2003-01-01

    The competition among airlines or among airports aiming at to increase the demand for its services has been more and more incited. Knowledge the perception of the users for the offered services means to meet the customer's needs and expectations in order either to keep the customer, and therefore keep a significant advantage over competitors. The passenger of the air transportation wants rapidity, security and convenience. Convenience can be translated by comfort that the passenger wants for the price that he can pay. In this paper had been identified. as a result of a survey achieved in six Brazilian airports during 2002, the best indicators in the passenger's perception. These indicators among any others were listed m the handbook of Airports Council International (ACI). Distinctive perceptions were observed among passengers with different travel motivations. This survey had been carried through in the airports of Brasilia, Porto Alegre, Salvador. Fortaleza, Curitiba and Bel6m. Considering this survey we can identified the most attractive airport among them. This work is a way to help improve quality of service, in particular, m these six airports of the Brazilian network. The results should be published and made available to all the parties concerned (airport authority, airlines and service providers) and should lead to corrective action when the passenger is not satisfied with the service.

  8. Transport infrastructure and technology: Investment, externalities, and general equilibrium effects

    Energy Technology Data Exchange (ETDEWEB)

    Van den Bergh, Jeroen C.J.M.; Nijkamp, P. [Faculty of Economics, Free University, Amsterdam (Netherlands)

    1993-04-01

    The paper addresses the use of general equilibrium models to analyze transportation policies. After a discussion of possible approaches, a representative set of static and dynamic models is developed and investigated, which focus on the interaction between general equilibrium, transport, infrastructure and environment. It is shown that each of these allows one to deal with specific types of policy questions. More technical modelling issues are dealt with as well, e.g. returns to scale, production functions, and disaggregation. Finally, attention is devoted to freight transport in a multisectoral production setting. 5 figs., 8 refs.

  9. JB-300: An advanced medium size transport for 2005

    Science.gov (United States)

    Debrouwer, Giles; Graham, Katherine; Ison, Jim; Juarez, Vince; Moskalik, Steve; Pankonin, Jon; Weinstein, Arnold

    1993-01-01

    In the fall of 1992, the TAC Team was presented with a Request for Proposal (PFP) for a mid-size (250-350 passenger) commercial transport. The aircraft was to be extremely competitive in the areas of passenger comfort, performance, and economic aspects. Through the use of supercritical airfoils, a technologically advanced Very High By-pass Ratio (VHBR) turbofan engine, a low overall drag configuration, a comparable interior layout, and mild use of composites, the JB-300 offers an economically viable choice to the airlines. The cents per passenger mile of the JB-300 is 1.76, which is considerably lower than current aircraft in the same range. Overall, the JB-300 is a technologically advanced aircraft, which will meet the demands of the 21st century.

  10. Benefits assessment of advanced public transportation system technologies, update 2000

    Science.gov (United States)

    This report was performed under the Federal Transit Administration's (FTA) Advanced Public Transportation Systems (APTS) Program. This program focuses on the development and demonstration of innovative advanced navigation, information and communicati...

  11. Sustainable Passenger Transportation: Dynamic Ride-Sharing

    NARCIS (Netherlands)

    N.A.H. Agatz (Niels); A. Erera (Alan); M.W.P. Savelsbergh (Martin); X. Wang (Xing)

    2010-01-01

    textabstractRide-share systems, which aim to bring together travelers with similar itineraries and time schedules, may provide significant societal and environmental benefits by reducing the number of cars used for personal travel and improving the utilization of available seat capacity. Effective

  12. Telecommunications' usage and public transport passengers' travel ...

    African Journals Online (AJOL)

    Ethiopian Journal of Environmental Studies and Management. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 8 (2015) >. Log in or Register to get access to full text downloads.

  13. Transport system as an element of sustainable economic growth in the tourist region

    OpenAIRE

    Mrnjavac, Edna

    2001-01-01

    Transport system is a whole composed of technical, technological, organisational, economic and legislative elements with the aim to perform transfer, loading and unloading of goods and passengers. Taking in consideration that most economic activities demand participation of certain transport system elements, any economic growth is impossible without an adequate transport system development. In order to secure environmental sustainable economic growth the economic policy subjects have to pay s...

  14. Effects of energy constraints on transportation systems. [Twenty-six papers

    Energy Technology Data Exchange (ETDEWEB)

    Mittal, R. K. [ed.

    1977-12-01

    Twenty-six papers are presented on a variety of topics including: energy and transportaton facts and figures; long-range planning under energy constraints; technology assessment of alternative fuels; energy efficiency of intercity passenger and freight movement; energy efficiency of intracity passenger movement; federal role; electrification of railroads; energy impact of the electric car in an urban enviroment; research needs and projects in progress--federal viewpoint; research needs in transportation energy conservation--data needs; and energy intensity of various transportation modes--an overview. A separate abstract was prepared for each of the papers for inclusion in Energy Research Abstracts (ERA) and in Energy Abstracts for Policy Analysis (EAPA).

  15. An investigation on energy consumption trend in Japan. Transportation sector

    International Nuclear Information System (INIS)

    Suzuki, Takayoshi

    2005-08-01

    Although energy consumption in the industry sector has almost been stable, energy consumption in the transportation (passenger and freight) sector has increased much after the oil crisis. The increase of energy consumption in the passenger sector can be attributed to the increase in transportation by private passenger vehicles; while the increase in the freight sector was due to the modal shift to trucks. Among transportation methods, automobiles, i.e. passenger vehicles and trucks, are now dominant in terms of energy consumption and also in terms of amount of transportation. Therefore implementing energy conservation measures relating to automobiles is very important in order to suppress the energy consumption in the transportation sector. This report summarizes the results of investigation on energy conservation measures, especially relevant to automobiles. It was found from the investigation that most promising and effective technologies or measures are promoting market penetration of vehicles satisfying ''top runner standard'', development and employment of hybrid vehicles, and introduction of vehicles with ''idling-stop'' systems. (author)

  16. The Adaptation of Ways and Methods of Risk Minimization in Local Payment Systems in Public Transport

    Directory of Open Access Journals (Sweden)

    Avdaev Mausar Yushaevich

    2014-12-01

    Full Text Available The problems of risk management gain special relevance in the conditions of payment systems development in public passenger transport in Russia. The risk carriers as well as the sources of their occurrence are revealed; the characteristics of private risks of individual participants in the system of public passenger transport are presented. The directions of risk management in relation to the payment system in public transport are reasoned and structured. It is proved that the choice of specific ways to minimize the risks in local payment systems in public transport is conditioned by the following factors – the nature of the payment system integration in public transport areas, the temporary nature of risk components effect due to the improvement of organizational, economic and technological factors, the change of the stages of payment systems development, the evaluation of risks effects. The article reasons the possibility of using and adjusting traditional ways (risk evasion, risk compensation, decrease in risk level, risk transfer, distribution of risk between participants and the methods of risk management in the payment systems in public transport according to the stages of their development and functioning for the processing center, passenger motor transport organizations, financial center and passengers (payers. The authors justify the directions of integrating the local payment systems of public transport in the national payment system, taking into account the risks involved in the activity of its members.

  17. Applicability of CHSST Maglev technology for U.S. urban transportation

    Science.gov (United States)

    2003-06-01

    This report discusses the Chubu HSST technology applicability to U.S. urban transportation. This low speed system based on the principle of electromagnetic levitation by attractive suspension and propulsion by vehicle mounted linear induction motors ...

  18. Sustainable transportation : technology, engineering, and science : summer camp instructor’s guide.

    Science.gov (United States)

    2014-03-01

    This document reproduces the instructors guide for a ten day transportation engineering summer camp that was held at the University of Idaho in July 2013. The instructors guide is split into three units: Unit 1: Vehicle Technology, Unit 2: Traf...

  19. Application of information technology to transportation logistics and security at Northern Kentucky University.

    Science.gov (United States)

    2013-02-28

    This research grant provided the opportunity to research and deploy beneficial transportation technologies to support transit needs. Working with the Transit Authority of Northern Kentucky (TANK), solutions were developed that can apply to transit ag...

  20. PTC test bed upgrades to provide ACSES testing support capabilities at transportation technology center.

    Science.gov (United States)

    2015-06-01

    FRA Task Order 314 upgraded the Positive Train Control (PTC) Test Bed at the Transportation Technology Center to support : testing of PTC systems, components, and related equipment associated with the Advanced Civil Speed Enforcement System : (ACSES)...

  1. Propulsion Study for Small Transport Aircraft Technology (STAT)

    Science.gov (United States)

    Gill, J. C.; Earle, R. V.; Staton, D. V.; Stolp, P. C.; Huelster, D. S.; Zolezzi, B. A.

    1980-01-01

    Propulsion requirements were determined for 0.5 and 0.7 Mach aircraft. Sensitivity studies were conducted on both these aircraft to determine parametrically the influence of propulsion characteristics on aircraft size and direct operating cost (DOC). Candidate technology elements and design features were identified and parametric studies conducted to select the STAT advanced engine cycle. Trade off studies were conducted to determine those advanced technologies and design features that would offer a reduction in DOC for operation of the STAT engines. These features were incorporated in the two STAT engines. A benefit assessment was conducted comparing the STAT engines to current technology engines of the same power and to 1985 derivatives of the current technology engines. Research and development programs were recommended as part of an overall technology development plan to ensure that full commercial development of the STAT engines could be initiated in 1988.

  2. Dynamic Passenger Assignment during Disruptions in Railway Systems

    NARCIS (Netherlands)

    Zhu, Y.; Goverde, R.M.P.

    2017-01-01

    Passenger-oriented rescheduling problems receive increasing attention. However, the passenger assignment models used for evaluating the rescheduling solutions are usually simplified by many assumptions. To estimate passenger inconvenience more accurately, this paper establishes a dynamic passenger

  3. Reasons and remedies of inland passenger vessels accidents in Bangladesh

    Science.gov (United States)

    Rashid, Cdr Kaosar; Islam, Muhammad Rabiul

    2017-12-01

    The waterways are very important means of communication in Bangladesh. Every year over 95 million passengers are carried through this route. But, this important mode of transport is ridden with tragic disasters every year, incurring a heavy toll of human lives. In last twenty years (1994 to 2014), around 5,500 people have died and 1,500 gone missing in 658 launch disasters. The inland routes of Barisal, Bhola, Chandpur and Patuakhali and their connected water ways to Dhaka and Chittagong are found to be more accident prone. Lack of Awareness, boundless operation of unfit vessels, overloading of passengers, recruitment of unskilled crews, poor capacity of relevant bodies and low standard maintenance of Inland Water Transport (IWT) channels, poor weather forecasting, profit centered attitude of vessel owners and corruption are initiating these deadly accidents. Despite of a number of initiatives by the government, concerned departments and foreign consultants, the safety aspect of the inland passenger vessels still remains in dark. Combined effort of Department of Shipping, BIWTA, and the attitude of vessels owners as well as passengers are very essential in this respect.

  4. Instrumento de avaliação para melhorias em processos organizacionais: caso do transporte coletivo rodoviário urbano de Porto Alegre Assessment instrument for organizational process improvement: the case of urban passengers transportation in Porto Alegre

    Directory of Open Access Journals (Sweden)

    Miriam Borchardt

    2007-08-01

    Full Text Available Este artigo apresenta os dados obtidos a partir de estudos de casos em três empresas de transporte coletivo rodoviário urbano de Porto Alegre, estudos estes realizados no segundo semestre de 2004. O objetivo da pesquisa foi desenvolver um instrumento gerencial para a avaliação do potencial de melhoria dos processos destas organizações. Para desenvolver o instrumento de diagnóstico foi considerada a realidade do setor de transporte por ônibus nesta capital e a base teórica referente aos sistemas de gestão baseados na melhoria dos processos, tais como os critérios de excelência do prêmio ANTP de Qualidade, os princípios da Mentalidade Enxuta e do Lean Management. A definição do valor a ser oferecido pelo serviço de transporte, com base na percepção dos usuários, é um ponto que aparece como de grande potencial de melhoria, bem como o equilíbrio entre demanda e capacidade instalada.This paper presents data and information collected in the second semester of 2004, in a multiple case study developed in three city public bus transportation companies, operating in Porto Alegre. The goal of the research was to develop an instrument for assessing the potential for streamlining processes in companies. To do so, it was considered the business scenario of companies and industry, and the theoretical framework presented in Lean Thinking, ean Management, Award Excellence Criteria of industry. Issues related to perceived value present the major gaps between the degree of importance and degree of application attributed by these companies. Secondary gaps refer to balancing service capacity and demand.

  5. Investigation of air transportation technology at Princeton University, 1983

    Science.gov (United States)

    Stengel, Robert F.

    1987-01-01

    Progress is discussed for each of the following areas: voice recognition technology for flight control; guidance and control strategies for penetration of microbursts and wind shear; application of artificial intelligence in flight control systems; and computer-aided aircraft design.

  6. 49 CFR 369.11 - Quarterly reports of passenger revenues, expenses, and statistics.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 5 2010-10-01 2010-10-01 false Quarterly reports of passenger revenues, expenses, and statistics. 369.11 Section 369.11 Transportation Other Regulations Relating to Transportation..., and statistics. Commencing with reports for the quarter ended March 31, 1968, and for subsequent...

  7. 19 CFR 4.50 - Passenger lists.

    Science.gov (United States)

    2010-04-01

    ... VESSELS IN FOREIGN AND DOMESTIC TRADES Passengers on Vessels § 4.50 Passenger lists. (a) The master of... passenger and crew lists, as required by § 4.7(a) of this part. If the vessel is arriving from noncontiguous... 19 Customs Duties 1 2010-04-01 2010-04-01 false Passenger lists. 4.50 Section 4.50 Customs Duties...

  8. Maritime transport operation in conditions of globalization

    Directory of Open Access Journals (Sweden)

    Tomasz Nowosielski

    2011-06-01

    Full Text Available The contemporary world economy is subject to dynamic integration processes that cause the most open countries in the free import and export goods. Intensive trade relations requires intercontinental free access to well-functioning transport systems. In the case of trade with distant partners, especially on other continents, an important criterion for the organization of cargo handling is a long range. Technological development of means of transport has meant that transport services have become a cheap and highly accessible to passengers and cargo.

  9. An observational comparison of the older and younger bus passenger experience in a developing world city.

    Science.gov (United States)

    Aceves-González, Carlos; May, Andrew; Cook, Sharon

    2016-06-01

    This study was an unobtrusive observational analysis of 333 older and younger bus passengers in Guadalajara, Mexico. A set of data were collected for each observed passenger, as well as more general observations related to driver behaviour, bus design and bus service characteristics. There were significant differences between older and younger passengers in terms of boarding and alighting times, use of handrails, seat location preferences, passenger stability and coping strategies in order to maintain postural stability. The conditions of travel are conducive to a poor passenger experience for the older passengers in particular. Although the problems may be attributed to bus design and driver behaviour typical of that in developing countries, they are also influenced by the wider transport infrastructure, and a lack of a regulatory regime which places drivers under time pressure and in direct competition with each other. Practitioner Summary: Bus services must cater for all ages of passengers, including the elderly. This unobtrusive observational study investigated the passenger experience in a developing world city. Bus and wider service design were found to compromise the journey experience, with the older users being particularly negatively impacted. Design recommendations are provided.

  10. 49 CFR 1331.5 - Additional standards for retaining antitrust immunity by passenger bus industry rate bureaus.

    Science.gov (United States)

    2010-10-01

    ... immunity by passenger bus industry rate bureaus. 1331.5 Section 1331.5 Transportation Other Regulations... standards for retaining antitrust immunity by passenger bus industry rate bureaus. (a) Rate bureaus must... tariff structure modifies in a relatively non-uniform fashion the relationship between most rates...

  11. Energy Use of Passenger Cars

    DEFF Research Database (Denmark)

    Jørgensen, Kaj

    1998-01-01

    Analysis of the Danish sale and stock of passenger cars, focusing particularly on aspects influencing energy use. The project has tracked the development of vehicle weight, power and fuel economy for both the sale of new cars (from 1980 to 1997)and the stock. In addition, the energy use...

  12. Commercial Passenger Fishing Vessel Fishery

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains the logbook data from U.S.A. Commercial Passenger Fishing Vessels (CPFV) fishing in the U.S.A. EEZ and in waters off of Baja California, from...

  13. THE IMPACT OF INFORMATION AND COMMUNICATION TECHNOLOGY ON ROAD FREIGHT TRANSPORTATION

    Directory of Open Access Journals (Sweden)

    Ryuichi YOSHIMOTO

    2005-01-01

    Full Text Available Surveying the recent trend toward e-commerce and computerization in the trucking industry, this paper establishes a framework for analyzing the impact of information and communication technology on road freight transportation in terms of commerce, logistics and fleet management, and proposes hypothetical mechanisms of influence. The authors note that the rapid growth of e-commerce and freight fleet management systems make it difficult to arrive at firm, statistics-based conclusions about their impact on road freight transportation, but suggest that more sophisticated government management of transportation demand as well as freight fleet management systems could cancel out the negative impact of e-commerce on road transportation.

  14. 2013 International Conference on Electrical and Information Technologies for Rail Transportation

    CERN Document Server

    Liu, Zhigang; Qin, Yong; Zhao, Minghua; Diao, Lijun

    2014-01-01

    Proceedings of the 2013 International Conference on Electrical and Information Technologies for Rail Transportation (EITRT2013) collects the latest research in this field, including a wealth of state-of-the-art research theories and applications in intelligent computing, information processing, communication technology, automatic control, etc. The objective of the proceedings is to provide a major interdisciplinary forum for researchers, engineers, academics and industrial professionals to present the most innovative research on and developments in the field of rail transportation electrical and information technologies. Contributing authors from academia, industry and the government also offer inside views of new, interdisciplinary solutions.

  15. Mobile internet technologies and their application to intelligent transportation systems

    Science.gov (United States)

    2003-01-01

    The worlds of mobile communication and the Internet are rapidly converging. This new domain, which is being touted as the "Wireless Web" or "Mobile Internet", is in its infancy and will require a number of complex technologies to mature and converge ...

  16. Allegheny Portage Railroad: Developing Transportation Technology. Teaching with Historic Places.

    Science.gov (United States)

    Eick, Brian; Wallner, Rick

    1999-01-01

    Presents a lesson that will help students discover the innovative technologies of the Allegheny Portage Railroad that can be used when teaching about early 19th-century expansion and industrialization. Expounds that students' skills in geography and history will be strengthened through map reading, examination of pictures, and analysis of…

  17. Investigation of air transportation technology at Princeton University, 1985

    Science.gov (United States)

    Stengel, Robert F.

    1987-01-01

    The program proceeded along five avenues during 1985. Guidance and control strategies for penetration of microbursts and wind shear, application of artificial intelligence in flight control and air traffic control systems, the use of voice recognition in the cockpit, the effects of control saturation on closed-loop stability and response of open-loop unstable aircraft, and computer aided control system design are among the topics briefly considered. Areas of investigation relate to guidance and control of commercial transports as well as general aviation aircraft. Interaction between the flight crew and automatic systems is the subject of principal concern.

  18. Innovative technology summary report: Road Transportable Analytical Laboratory (RTAL)

    International Nuclear Information System (INIS)

    1998-10-01

    The Road Transportable Analytical Laboratory (RTAL) has been used in support of US Department of Energy (DOE) site and waste characterization and remediation planning at Fernald Environmental Management Project (FEMP) and is being considered for implementation at other DOE sites, including the Paducah Gaseous Diffusion Plant. The RTAL laboratory system consists of a set of individual laboratory modules deployable independently or as an interconnected group to meet each DOE site's specific analysis needs. The prototype RTAL, deployed at FEMP Operable Unit 1 Waste Pits, has been designed to be synergistic with existing analytical laboratory capabilities, thereby reducing the occurrence of unplanned rush samples that are disruptive to efficient laboratory operations

  19. Integrated energy planning for transportation sector - A case study for Iran with techno-economic approach

    Energy Technology Data Exchange (ETDEWEB)

    Sadeghi, Mehdi [Economics Department, Imam Sadiq University, Tehran (Iran); Mirshojaeian Hosseini, Hossein [Tehran University, Tehran (Iran)

    2008-02-15

    Transportation sectors in developing countries suffer from some diseases that one of them is ever-increasing energy consumption. Integrated National Energy Planning (INEP) in transportation sector is a solution for these countries to alter their suboptimal pattern and rationalize their energy consumption. One of the INEP targets is determining optimal patterns of fuels and transportation technologies to satisfy future demand of freight and passenger transportation at the lowest cost levels. Following the above target, this paper is concerned with the optimal consumption pattern of fuels focusing on vehicle technologies within the next 25 years (up to 2029). Using Energy Flow Optimization Model-ENVironment (EFOM-ENV) model, various steps as designing of ''Reference Energy System (RES)'' of the model, data processing and scenario analysis are followed. Based on the modeling results, substitution of urban railroad technologies (subway, LRT and monorail), all of passenger CNG technologies (cars, buses and minibuses), rural railroad freight technologies (electrical, gas oil and LNG freight trains) and finally, CNG and LNG heavy and light trucks with current passenger and freight vehicle technologies are suggested. This scenario will decline fuel consumption by about 14% totally, that the most part of it belongs to gasoline and gas oil (24% and 17%, respectively). Total discounted cost of transportation system will decline from 806.20 to 691.74 billion dollars (14%) during the time horizon. (author)

  20. Telemedical Advice to Long Distance Passenger Ferries

    DEFF Research Database (Denmark)

    Jensen, Olaf Chresten; Bøggild, Niels Bo; Kristensen, Søren

    consultations with passenger ferries to identify areas for possible improvements. Methods: Data from the journals for one year from Radio Medical Denmark consultations with the medical Data from the journals for one year from Radio Medical Denmark consultations with the medical responsible officers on passenger...... ferries was analysed retrospectively. Results: Two hundred and fourteen RM records, 73% among passenger and 27% among crewmember Two hundred and fourteen RM records, 73% among passenger and 27% among crewmember patients were analysed. Passenger patients were generally older and more serious ill than...

  1. Determinants of injuries in passenger vessel accidents.

    Science.gov (United States)

    Yip, Tsz Leung; Jin, Di; Talley, Wayne K

    2015-09-01

    This paper investigates determinants of crew and passenger injuries in passenger vessel accidents. Crew and passenger injury equations are estimated for ferry, ocean cruise, and river cruise vessel accidents, utilizing detailed data of individual vessel accidents that were investigated by the U.S. Coast Guard during the time period 2001-2008. The estimation results provide empirical evidence (for the first time in the literature) that crew injuries are determinants of passenger injuries in passenger vessel accidents. Copyright © 2015 Elsevier Ltd. All rights reserved.

  2. FINANCING PUBLIC TRANSPORT SERVICES FROM PUBLIC FUNDS

    Directory of Open Access Journals (Sweden)

    Miloš POLIAK

    2017-12-01

    Full Text Available The paper deals with the issue of efficiency of public passenger transport through financial support from public funds from the perspective of improving road safety. The aim is to verify the hypothesis that financing public passenger transport from public funds is a significant tool to influence the number of passengers carried by individual automobile transport, and thus it can be used a tool for influencing road safety in a particular territory. The first part of the paper analyses the sources for financial support of public passenger transport. The next part describes the assumptions for improving road safety through increasing the support of public passenger transport. The last part analyses possible impacts of financing public passenger transport on the road safety in relation to the specified hypothesis.

  3. Future earth orbit transportation systems/technology implications

    Science.gov (United States)

    Henry, B. Z.; Decker, J. P.

    1976-01-01

    Assuming Space Shuttle technology to be state-of-the-art, projected technological advances to improve the capabilities of single-stage-to-orbit (SSTO) derivatives are examined. An increase of about 30% in payload performance can be expected from upgrading the present Shuttle system through weight and drag reductions and improvements in the propellants and engines. The ODINEX (Optimal Design Integration Executive Computer Program) program has been used to explore design options. An advanced technology SSTO baseline system derived from ODINEX analysis has a conventional wing-body configuration using LOX/LH engines, three with two-position nozzles with expansion ratios of 40 and 200 and four with fixed nozzles with an expansion ratio of 40. Two assisted-takeoff approaches are under consideration in addition to a concept in which the orbital vehicle takes off empty using airbreathing propulsion and carries out a rendezvous with two large cryogenic tankers carrying propellant at an altitude of 6100 m. Further approaches under examination for propulsion, aerothermodynamic design, and design integration are described.

  4. Development of high temperature molten salt transport technology for pyrometallurgical reprocessing

    International Nuclear Information System (INIS)

    Hijikata, Takatoshi; Koyama, Tadafumi

    2009-01-01

    Pyrometallurgical reprocessing technology is currently being focused in many countries for closing actinide fuel cycle because of its favorable economic potential and an intrinsic proliferation-resistant feature due to the inherent difficulty of extracting weapons-usable plutonium. The feasibility of pyrometallurgical reprocessing has been demonstrated through many laboratory scale experiments. Hence the development of the engineering technology necessary for pyrometallurgical reprocessing is a key issue for industrial realization. The development of high-temperature transport technologies for molten salt and liquid cadmium is crucial for pyrometallurgical processing; however, there have been very few transport studies on high-temperature fluids. In this study, a salt transport test rig was installed in an argon glove box with the aim of developing technologies for transporting molten salt at approximately 773 K. The gravitation transport of the molten salt at approximately 773 K could be well controlled at a velocity from 0.1 to 1.2 m/s by adjusting the valve. Consequently, the flow in the molten salt can be controlled from laminar flow to turbulent flow. It was demonstrated that; using a centrifugal pump, molten salt at approximately 773 K could be transported at a controlled rate from 2.5 to 8 dm 3 /min against a 1 m head. (author)

  5. Are the Costs of Reducing Greenhouse Gases from Passenger Vehicles Negative?

    OpenAIRE

    Parry, Ian W.H.

    2006-01-01

    Energy models suggest that the cost of reducing carbon emissions from the transportation sector is high relative to other sectors, such as electricity generation. However, this paper shows that taxes to reduce passenger vehicle emissions produce large net benefits, rather than costs, when account is taken of (a) their impact on reducing non-carbon externalities from passenger vehicle use, and (b) interactions with the broader fiscal system. Both of these considerations also strengthen the cas...

  6. Feasibility Study of Cargo Airship Transportation Systems Powered by New Green Energy Technologies

    Science.gov (United States)

    Skuza, Jonathan R.; Park, Yeonjoon; Kim, Hyun Jung; Seaman, Shane T.; King, Glen C.; Choi, Sang H.; Song, Kyo D.; Yoon, Hargsoon; Lee, Kunik

    2014-01-01

    The development of transportation systems that use new and sustainable energy technologies is of utmost importance due to the possible future shortfalls that current transportation modes will encounter because of increased volume and costs. The introduction and further research and development of new transportation and energy systems by materials researchers at the National Aeronautics and Space Administration (NASA) Langley Research Center (LaRC) and the Department of Transportation are discussed in this Technical Memorandum. In this preliminary study, airship concepts were assessed for cargo transportation using various green energy technologies capable of 24-hour operation (i.e., night and day). Two prototype airships were successfully constructed and tested at LaRC to demonstrate their feasibility: one with commercially available solar cells for operation during the daytime and one with microwave rectennas (i.e., rectifying antennas) developed in-house for night-time operation. The test results indicate the feasibility of a cargo transportation airship powered by new green energy sources and wireless power technology. Future applications will exploit new green energy sources that use materials and devices recently developed or are in the process of being developed at LaRC. These include quantum well SiGe solar cells; low, mid-, and high temperature thermoelectric modules; and wireless microwave and optical rectenna devices. This study examines the need and development of new energy sources for transportation, including the current status of research, materials, and potential applications.

  7. Modeling and Simulating Passenger Behavior for a Station Closure in a Rail Transit Network.

    Directory of Open Access Journals (Sweden)

    Haodong Yin

    Full Text Available A station closure is an abnormal operational situation in which the entrances or exits of a rail transit station have to be closed for some time due to an unexpected incident. A novel approach is developed to estimate the impacts of the alternative station closure scenarios on both passenger behavioral choices at the individual level and passenger demand at the disaggregate level in a rail transit network. Therefore, the contributions of this study are two-fold: (1 A basic passenger behavior optimization model is mathematically constructed based on 0-1 integer programming to describe passengers' responses to alternative origin station closure scenarios and destination station closure scenarios; this model also considers the availability of multi-mode transportation and the uncertain duration of the station closure; (2 An integrated solution algorithm based on the passenger simulation is developed to solve the proposed model and to estimate the effects of a station closure on passenger demand in a rail transit network. Furthermore, 13 groups of numerical experiments based on the Beijing rail transit network are performed as case studies with 2,074,267 records of smart card data. The comparisons of the model outputs and the manual survey show that the accuracy of our proposed behavior optimization model is approximately 80%. The results also show that our model can be used to capture the passenger behavior and to quantitatively estimate the effects of alternative closure scenarios on passenger flow demand for the rail transit network. Moreover, the closure duration and its overestimation greatly influence the individual behavioral choices of the affected passengers and the passenger demand. Furthermore, if the rail transit operator can more accurately estimate the closure duration (namely, as g approaches 1, the impact of the closure can be somewhat mitigated.

  8. Modeling and Simulating Passenger Behavior for a Station Closure in a Rail Transit Network.

    Science.gov (United States)

    Yin, Haodong; Han, Baoming; Li, Dewei; Wu, Jianjun; Sun, Huijun

    2016-01-01

    A station closure is an abnormal operational situation in which the entrances or exits of a rail transit station have to be closed for some time due to an unexpected incident. A novel approach is developed to estimate the impacts of the alternative station closure scenarios on both passenger behavioral choices at the individual level and passenger demand at the disaggregate level in a rail transit network. Therefore, the contributions of this study are two-fold: (1) A basic passenger behavior optimization model is mathematically constructed based on 0-1 integer programming to describe passengers' responses to alternative origin station closure scenarios and destination station closure scenarios; this model also considers the availability of multi-mode transportation and the uncertain duration of the station closure; (2) An integrated solution algorithm based on the passenger simulation is developed to solve the proposed model and to estimate the effects of a station closure on passenger demand in a rail transit network. Furthermore, 13 groups of numerical experiments based on the Beijing rail transit network are performed as case studies with 2,074,267 records of smart card data. The comparisons of the model outputs and the manual survey show that the accuracy of our proposed behavior optimization model is approximately 80%. The results also show that our model can be used to capture the passenger behavior and to quantitatively estimate the effects of alternative closure scenarios on passenger flow demand for the rail transit network. Moreover, the closure duration and its overestimation greatly influence the individual behavioral choices of the affected passengers and the passenger demand. Furthermore, if the rail transit operator can more accurately estimate the closure duration (namely, as g approaches 1), the impact of the closure can be somewhat mitigated.

  9. Transportation Electrification Beyond Light Duty: Technology and Market Assessment

    Energy Technology Data Exchange (ETDEWEB)

    Tartaglia, Katie [Energetics Inc., Columbia, MD (United States); Birky, Alicia [Energetics Inc., Columbia, MD (United States); Laughlin, Michael [Energetics Inc., Columbia, MD (United States); Price, Rebecca [Energetics Inc., Columbia, MD (United States); Lin, Zhenhong [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2017-07-01

    Commercial fleets form the backbone of the nation’s economy, getting people and the things they need to the places they need to go and performing services necessary to keep public and private physical infrastructure in working order. Commercial fleets include a wide range of vehicle and equipment types, typical uses, and sizes, and involve millions of on-road and offroad vehicles. This diversity means there is no single solution to the challenges these vehicles pose for reducing petroleum dependence, impact on air quality, and emission of greenhouse gases. This document focuses on electrification of government, commercial, and industrial fleets. These fleets have been divided into three market segments based on equipment use: service fleets, goods movement, and people movement. In particular, it addresses highway vehicles not used for personal transport; non-highway modes, including air, rail, and water; and non-road equipment used directly or in support of these uses.

  10. Evaluating efficiency of passenger railway stations: a DEA approach

    OpenAIRE

    Khadem Sameni, Melody; Preston, John; Khadem Sameni, Mona

    2016-01-01

    Stations are bottlenecks for railway transportation as they are where traffics merge and diverge. Numerous activities such as passengers boarding, alighting and interchanging, train formation and technical checks are also done at these points. The number of platforms is limited and it is vital to do all the work efficiently. For the first time in the literature, we implement a methodology based on data envelopment analysis which is benchmarked from ports and airport efficiency studies. It can...

  11. Models for Train Passenger Forecasting of Java and Sumatra

    Science.gov (United States)

    Sartono

    2017-04-01

    People tend to take public transportation to avoid high traffic, especially in Java. In Jakarta, the number of railway passengers is over than the capacity of the train at peak time. This is an opportunity as well as a challenge. If it is managed well then the company can get high profit. Otherwise, it may lead to disaster. This article discusses models for the train passengers, hence, finding the reasonable models to make a prediction overtimes. The Box-Jenkins method is occupied to develop a basic model. Then, this model is compared to models obtained using exponential smoothing method and regression method. The result shows that Holt-Winters model is better to predict for one-month, three-month, and six-month ahead for the passenger in Java. In addition, SARIMA(1,1,0)(2,0,0) is more accurate for nine-month and twelve-month oversee. On the other hand, for Sumatra passenger forecasting, SARIMA(1,1,1)(0,0,2) gives a better approximation for one-month ahead, and ARIMA model is best for three-month ahead prediction. The rest, Trend Seasonal and Liner Model has the least of RMSE to forecast for six-month, nine-month, and twelve-month ahead.

  12. The environmental performance of current and future passenger vehicles: Life cycle assessment based on a novel scenario analysis framework

    International Nuclear Information System (INIS)

    Bauer, Christian; Hofer, Johannes; Althaus, Hans-Jörg; Del Duce, Andrea; Simons, Andrew

    2015-01-01

    Highlights: • We perform Life Cycle Assessment (LCA) of current and future passenger vehicles. • We include gasoline, diesel and natural gas as well as battery and fuel cell cars. • An integrated vehicle simulation framework guarantees consistency. • Only electric cars with “clean” electricity and H_2 allow for pollution mitigation. • Complete LCA is mandatory for environmental evaluation of vehicle technologies. - Abstract: This paper contains an evaluation of the environmental performance of a comprehensive set of current and future mid-size passenger vehicles. We present a comparative Life Cycle Assessment (LCA) based on a novel integrated vehicle simulation framework, which allows for consistency in vehicle parameter settings and consideration of future technological progress. Conventional and hybrid gasoline, diesel and natural gas cars as well as battery and fuel cell electric vehicles (BEV and FCV) are analyzed, taking into account electricity and hydrogen production chains from fossil, nuclear and renewable energy resources. Our results show that a substantial mitigation of climate change can be obtained with electric passenger vehicles, provided that non-fossil energy resources are used for electricity and hydrogen production. However, in terms of other environmental burdens such as acidification, particulate matter formation, and toxicity, BEV may in some cases and FCV are likely to perform worse than modern fossil fueled cars as a consequence of emissions along vehicle and fuel production chains. Therefore, the electrification of road transportation should be accompanied by an integration of life cycle management in vehicle manufacturing chains as well as energy and transport policies in order to counter potential environmental drawbacks.

  13. Impacts of urban form on future US passenger-vehicle greenhouse gas emissions

    Energy Technology Data Exchange (ETDEWEB)

    Hankey, Steve; Marshall, Julian D. [Department of Civil Engineering, University of Minnesota, 500 Pillsbury Drive SE, Minneapolis, MN 55455 (United States)

    2010-09-15

    Urban form - for example, sprawl versus infill development - impacts people's daily travel patterns and annual vehicle-kilometers traveled (VKT). This paper explores how urban form impacts greenhouse gas (GHG) emissions from passenger-vehicles, the largest source of urban transportation GHG emissions. Our research uses a recently published urban scaling rule to develop six scenarios for high- and low-sprawl US urban growth. We develop and apply a Monte Carlo approach that describes ensemble statistics for several dozen urban areas rather than forecasting changes in individual urban areas. Then, employing three vehicle- and fuel-technology scenarios, we estimate total passenger VKT and resulting GHG emissions for US urban areas. Our results indicate that comprehensive compact development could reduce US 2000-2020 cumulative emissions by up to 3.2 GtCO{sub 2}e (15-20% of projected cumulative emissions). In general, vehicle GHG mitigation may involve three types of approaches: more-efficient vehicles, lower-GHG fuels, and reduced VKT. Our analyses suggest that all three categories must be evaluated; otherwise, improvements in one or two areas (e.g., vehicle fuel economy, fuel carbon content) can be offset by backsliding in a third area (e.g., VKT growth). (author)

  14. Impacts of urban form on future US passenger-vehicle greenhouse gas emissions

    International Nuclear Information System (INIS)

    Hankey, Steve; Marshall, Julian D.

    2010-01-01

    Urban form - for example, sprawl versus infill development - impacts people's daily travel patterns and annual vehicle-kilometers traveled (VKT). This paper explores how urban form impacts greenhouse gas (GHG) emissions from passenger-vehicles, the largest source of urban transportation GHG emissions. Our research uses a recently published urban scaling rule to develop six scenarios for high- and low-sprawl US urban growth. We develop and apply a Monte Carlo approach that describes ensemble statistics for several dozen urban areas rather than forecasting changes in individual urban areas. Then, employing three vehicle- and fuel-technology scenarios, we estimate total passenger VKT and resulting GHG emissions for US urban areas. Our results indicate that comprehensive compact development could reduce US 2000-2020 cumulative emissions by up to 3.2 GtCO 2 e (15-20% of projected cumulative emissions). In general, vehicle GHG mitigation may involve three types of approaches: more-efficient vehicles, lower-GHG fuels, and reduced VKT. Our analyses suggest that all three categories must be evaluated; otherwise, improvements in one or two areas (e.g., vehicle fuel economy, fuel carbon content) can be offset by backsliding in a third area (e.g., VKT growth).

  15. Estimate of the technological costs of CO{sub 2} emission reductions in passenger cars. Emission reduction potentials and their costs; Technikkostenschaetzung fuer die CO{sub 2}-Emissionsminderung bei Pkw. Emissionsminderungspotenziale und ihre Kosten

    Energy Technology Data Exchange (ETDEWEB)

    Herbener, Reinhard; Jahn, Helge; Wetzel, Frank [Umweltbundesamt, Dessau-Rosslau (Germany). Fachgebiet I 3.2 - Schadstoffminderung und Energieeinsparung im Verkehr

    2008-08-06

    The Federal Environmental Office intended to identify the current fuel consumption reduction potential and the cost of efficiency-enhancing measures on passenger cars. For this purpose, an extensive bibliographic search was carried out, and experts from research institutes and from the automobile supplier industry were asked for their opinion. The results are published in table form. (orig.)

  16. Implications Of Technology Learning in Energy-Economy Models of the Transport Sector

    International Nuclear Information System (INIS)

    Krzyzanowski, D.A.; Kypreos, S.; Gutzwiller, L.; Barreto, L.

    2005-07-01

    Diffusion of hydrogen fuelled fuel cell vehicles is foreseen by many as the future for the transportation sector. However, high technological advancement over conventional power trains and improved performance of fuel cells as technology, do not guarantee that fuel cell vehicles will actually play a significant role in the transportation sector in the coming decades. In this study, an attempt is made to evaluate selected factors, which may have a stimulating or hindering effect on the market diffusion of fuel cell vehicles. The analysis evaluates the influence of technological learning of fuel cell stack components, prices of fuel cells, hydrogen and crude oil based fuels as well as governmental initiatives to penalise for CO 2 emissions coming from the transportation sector, on market diffusion of fuel cell vehicles in the coming years. (author)

  17. Implications Of Technology Learning in Energy-Economy Models of the Transport Sector

    Energy Technology Data Exchange (ETDEWEB)

    Krzyzanowski, D.A.; Kypreos, S.; Gutzwiller, L.; Barreto, L

    2005-07-01

    Diffusion of hydrogen fuelled fuel cell vehicles is foreseen by many as the future for the transportation sector. However, high technological advancement over conventional power trains and improved performance of fuel cells as technology, do not guarantee that fuel cell vehicles will actually play a significant role in the transportation sector in the coming decades. In this study, an attempt is made to evaluate selected factors, which may have a stimulating or hindering effect on the market diffusion of fuel cell vehicles. The analysis evaluates the influence of technological learning of fuel cell stack components, prices of fuel cells, hydrogen and crude oil based fuels as well as governmental initiatives to penalise for CO{sub 2} emissions coming from the transportation sector, on market diffusion of fuel cell vehicles in the coming years. (author)

  18. Vacuum technologies developed for at-400A Type B transportation and storage package

    International Nuclear Information System (INIS)

    Franklin, K.W.; Cockrell, G.D.

    1995-01-01

    The AT-400A TYPE B transportation and storage container will be used at Pantex Plant for the transportation and interim storage of plutonium pits. The AT-400A was designed by a joint effort between Sandia National Labs, Los Alamos National Labs, Lawrence Livermore National Laboratory, and Mason and Hanger-Silas Mason Co., Inc. In order to meet the requirements for transportation and storage, five different vacuum technologies had to be developed. The goals of the various vacuum technologies were to verify the plutonium pit was sealed, perform the assembly verification leak check in accordance with ANSI N-14.5 and to provide a final inert gas backfill in the containment vessel. This paper will discuss the following five vacuum technologies: (1) Pit Leak Testing, (2) Containment Vessel Purge and Backfill with tracer gas, (3) Containment Vessel Leak Testing, (4) Containment Vessel Purge and Final Backfill, and (5) Leak Testing of the Containment Vessel Gas Transfer tube

  19. Passenger baggage object database (PBOD)

    Science.gov (United States)

    Gittinger, Jaxon M.; Suknot, April N.; Jimenez, Edward S.; Spaulding, Terry W.; Wenrich, Steve A.

    2018-04-01

    Detection of anomalies of interest in x-ray images is an ever-evolving problem that requires the rapid development of automatic detection algorithms. Automatic detection algorithms are developed using machine learning techniques, which would require developers to obtain the x-ray machine that was used to create the images being trained on, and compile all associated metadata for those images by hand. The Passenger Baggage Object Database (PBOD) and data acquisition application were designed and developed for acquiring and persisting 2-D and 3-D x-ray image data and associated metadata. PBOD was specifically created to capture simulated airline passenger "stream of commerce" luggage data, but could be applied to other areas of x-ray imaging to utilize machine-learning methods.

  20. Proton exchange membrane fuel cell technology for transportation applications

    Energy Technology Data Exchange (ETDEWEB)

    Swathirajan, S. [General Motors R& D Center, Warren, MI (United States)

    1996-04-01

    Proton Exchange Membrane (PEM) fuel cells are extremely promising as future power plants in the transportation sector to achieve an increase in energy efficiency and eliminate environmental pollution due to vehicles. GM is currently involved in a multiphase program with the US Department of Energy for developing a proof-of-concept hybrid vehicle based on a PEM fuel cell power plant and a methanol fuel processor. Other participants in the program are Los Alamos National Labs, Dow Chemical Co., Ballard Power Systems and DuPont Co., In the just completed phase 1 of the program, a 10 kW PEM fuel cell power plant was built and tested to demonstrate the feasibility of integrating a methanol fuel processor with a PEM fuel cell stack. However, the fuel cell power plant must overcome stiff technical and economic challenges before it can be commercialized for light duty vehicle applications. Progress achieved in phase I on the use of monolithic catalyst reactors in the fuel processor, managing CO impurity in the fuel cell stack, low-cost electrode-membrane assembles, and on the integration of the fuel processor with a Ballard PEM fuel cell stack will be presented.

  1. Technology and human purpose: the problem of solids transport on the Earth's surface

    Science.gov (United States)

    Haff, P. K.

    2012-11-01

    Displacement of mass of limited deformability ("solids") on the Earth's surface is opposed by friction and (the analog of) form resistance - impediments relaxed by rotational motion, self-powering of mass units, and transport infrastructure. These features of solids transport first evolved in the biosphere prior to the emergence of technology, allowing slope-independent, diffusion-like motion of discrete objects as massive as several tons, as illustrated by animal foraging and movement along game trails. However, high-energy-consumption technology powered by fossil fuels required a mechanism that could support fast advective transport of solids, i.e., long-distance, high-volume, high-speed, unidirectional, slope-independent transport across the land surface of materials like coal, containerized fluids, minerals, and economic goods. Pre-technology nature was able to sustain regional- and global-scale advection only in the limited form of piggybacking on geophysical flows of water (river sediment) and air (dust). The appearance of a mechanism for sustained advection of solids independent of fluid flows and gravity appeared only upon the emergence of human purpose. Purpose enables solids advection by, in effect, simulating a continuous potential gradient, otherwise lacking, between discrete and widely separated fossil-fuel energy sources and sinks. Invoking purpose as a mechanism in solids advection is an example of the need to import anthropic principles and concepts into the language and methodology of modern Earth system dynamics. As part of the emergence of a generalized solids advection mechanism, several additional transport requirements necessary to the function of modern large-scale technological systems were also satisfied. These include spatially accurate delivery of advected payload, targetability to essentially arbitrarily located destinations (such as cities), and independence of structure of advected payload from transport mechanism. The latter property

  2. Swiss fuel cell passenger and pleasure boats

    Energy Technology Data Exchange (ETDEWEB)

    Affolter, J.-F.

    2000-07-01

    This paper published by the University of Applied Science in Yverdon-les-Bains, Switzerland, looks at the development of electrically driven small boats that are powered by fuel cells. The various implementations of the test boats are described. Starting with a 100-watt PEM fuel cell built by the Paul Scherrer Institute (PSI) and the University of Applied Science in Solothurn, Switzerland, for educational purposes, a small pedal-boat was electrified. The paper describes the development of four further prototypes and introduces a new project for a 6-passenger leisure boat powered by a 2 kW PEFC fuel cell. Apart from the fuel cells, various other components such as propellers and control electronics are discussed as are the remaining problems still to be solved before the cells and boats can be marketed. Since they were carried out at a technical university, these projects are said to have provided an excellent way of teaching new technologies to students.

  3. An assessment of advanced displays and controls technology applicable to future space transportation systems

    Science.gov (United States)

    Hatfield, Jack J.; Villarreal, Diana

    1990-01-01

    The topic of advanced display and control technology is addressed along with the major objectives of this technology, the current state of the art, major accomplishments, research programs and facilities, future trends, technology issues, space transportation systems applications and projected technology readiness for those applications. The holes that may exist between the technology needs of the transportation systems versus the research that is currently under way are addressed, and cultural changes that might facilitate the incorporation of these advanced technologies into future space transportation systems are recommended. Some of the objectives are to reduce life cycle costs, improve reliability and fault tolerance, use of standards for the incorporation of advancing technology, and reduction of weight, volume and power. Pilot workload can be reduced and the pilot's situational awareness can be improved, which would result in improved flight safety and operating efficiency. This could be accomplished through the use of integrated, electronic pictorial displays, consolidated controls, artificial intelligence, and human centered automation tools. The Orbiter Glass Cockpit Display is an example examined.

  4. Production Costs of Alternative Transportation Fuels. Influence of Crude Oil Price and Technology Maturity

    Energy Technology Data Exchange (ETDEWEB)

    Cazzola, Pierpaolo; Morrison, Geoff; Kaneko, Hiroyuki; Cuenot, Francois; Ghandi, Abbas; Fulton, Lewis

    2013-07-01

    This study examines the production costs of a range of transport fuels and energy carriers under varying crude oil price assumptions and technology market maturation levels. An engineering ''bottom-up'' approach is used to estimate the effect of the input cost of oil and of various technological assumptions on the finished price of these fuels. In total, the production costs of 20 fuels are examined for crude oil prices between USD 60 and USD 150 per barrel. Some fuel pathways can be competitive with oil as their production, transport and storage technology matures, and as oil price increases. Rising oil prices will offer new opportunities to switch to alternative fuels for transport, to diversify the energy mix of the transport sector, and to reduce the exposure of the whole system to price volatility and potential distuption of supply. In a time of uncertainty about the leading vehicle technology to decarbonize the transport sector, looking at the fuel cost brings key information to be considered to keep mobility affordable yet sustainable.

  5. Transformative Reduction of Transportation Greenhouse Gas Emissions. Opportunities for Change in Technologies and Systems

    Energy Technology Data Exchange (ETDEWEB)

    Vimmerstedt, Laura [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Brown, Austin [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Newes, Emily [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Markel, Tony [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Schroeder, Alex [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Zhang, Yimin [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Chipman, Peter [U.S. Department of Transportation, Washington, D.C. (United States); Johnson, Shawn [U.S. Department of Transportation, Washington, D.C. (United States)

    2015-04-30

    The transportation sector is changing, influenced by concurrent, ongoing, dynamic trends that could dramatically affect the future energy landscape, including effects on the potential for greenhouse gas emissions reductions. Battery cost reductions and improved performance coupled with a growing number of electric vehicle model offerings are enabling greater battery electric vehicle market penetration, and advances in fuel cell technology and decreases in hydrogen production costs are leading to initial fuel cell vehicle offerings. Radically more efficient vehicles based on both conventional and new drivetrain technologies reduce greenhouse gas emissions per vehicle-mile. Net impacts also depend on the energy sources used for propulsion, and these are changing with increased use of renewable energy and unconventional fossil fuel resources. Connected and automated vehicles are emerging for personal and freight transportation systems and could increase use of low- or non-emitting technologies and systems; however, the net effects of automation on greenhouse gas emissions are uncertain. The longstanding trend of an annual increase in transportation demand has reversed for personal vehicle miles traveled in recent years, demonstrating the possibility of lower-travel future scenarios. Finally, advanced biofuel pathways have continued to develop, highlighting low-carbon and in some cases carbon-negative fuel pathways. We discuss the potential for transformative reductions in petroleum use and greenhouse gas emissions through these emerging transportation-sector technologies and trends and present a Clean Transportation Sector Initiative scenario for such reductions, which are summarized in Table ES-1.

  6. Passenger car fuel consumption survey

    Energy Technology Data Exchange (ETDEWEB)

    1984-03-01

    This survey originated from a proposal to monitor the fuel consumption and fuel economy of personal use passenger cars operated in Canada. Its purpose is to establish a data base which would contain information on total distance travelled, total amount of fuel consumed, average distance obtained per unit of fuel, total expenditures on fuel, and seasonal fluctuations in fuel consumption and in distance travelled. Among the needs served by this data base are the monitoring of passenger car fuel economy standards and the estimation of pasenger car fuel requirements in conditions involving fuel shortages. Survey methodology is by telephone interview to trace selected vehicles to the registered owners, at which time a fuel purchase diary is then mailed to the principal driver of the car. The results are tabulated on a quarterly basis and to be released as they become available in bulletins similar to this. Data are presented for each province and the total for Canada is given. During the fourth quarter of 1982, it is estimated that there were 7.3 million personal use passenger cars operated in Canada. These cars were driven 28 billion kilometers and consumed 4.3 billion litres of fuel. Their average litres/100 kilometres and the average fuel consumption was 590 litres. 8 tabs.

  7. Literature review of the passenger airline business models : Full service carrier, low-cost carrier and charter airlines

    NARCIS (Netherlands)

    Carmona Benitez, R.B.; Lodewijks, G.

    2008-01-01

    The deregulation and liberalization of the air transportation industry have developed three main passenger business models: full service carriers, low-cost carriers, and charter airlines. Deregulation removed regulated fares and routes increasing competition and yields. Airlines business models main

  8. Hybrid-Electric and Distributed Propulsion Technologies for Large Commercial Transports: A NASA Perspective

    Science.gov (United States)

    Madavan, Nateri K.; Del Rosario, Ruben; Jankovsky, Amy L.

    2015-01-01

    Develop and demonstrate technologies that will revolutionize commercial transport aircraft propulsion and accelerate development of all-electric aircraft architectures. Enable radically different propulsion systems that can meet national environmental and fuel burn reduction goals for subsonic commercial aircraft. Focus on future large regional jets and single-aisle twin (Boeing 737- class) aircraft for greatest impact on fuel burn, noise and emissions. Research horizon is long-term but with periodic spinoff of technologies for introduction in aircraft with more- and all-electric architectures. Research aligned with new NASA Aeronautics strategic R&T thrusts in areas of transition to low-carbon propulsion and ultra-efficient commercial transports.

  9. Transport Schemes for Fiber-Wireless Technology: Transmission Performance and Energy Efficiency

    Directory of Open Access Journals (Sweden)

    Christina Lim

    2014-04-01

    Full Text Available Fiber-wireless technology has been actively researched as a potential candidate for next generation broadband wireless signal distribution. Despite the popularity, this hybrid scheme has many technical challenges that impede the uptake and commercial deployment. One of the inherent issues is the transport of the wireless signals over a predominantly digital optical network in today’s telecommunication infrastructure. Many different approaches have been introduced and demonstrated with digitized RF transport of the wireless signals being the most compatible with the existing optical fiber networks. In this paper, we review our work in the area of digitized RF transport to address the inherent issues related to analog transport in the fiber-wireless links and compare the transmission performance and energy efficiency with the other transport strategies.

  10. Towards Life Cycle Sustainability Assessment of Alternative Passenger Vehicles

    Directory of Open Access Journals (Sweden)

    Nuri Cihat Onat

    2014-12-01

    Full Text Available Sustainable transportation and mobility are key components and central to sustainable development. This research aims to reveal the macro-level social, economic, and environmental impacts of alternative vehicle technologies in the U.S. The studied vehicle technologies are conventional gasoline, hybrid, plug-in hybrid with four different all-electric ranges, and full battery electric vehicles (BEV. In total, 19 macro level sustainability indicators are quantified for a scenario in which electric vehicles are charged through the existing U.S. power grid with no additional infrastructure, and an extreme scenario in which electric vehicles are fully charged with solar charging stations. The analysis covers all life cycle phases from the material extraction, processing, manufacturing, and operation phases to the end-of-life phases of vehicles and batteries. Results of this analysis revealed that the manufacturing phase is the most influential phase in terms of socio-economic impacts compared to other life cycle phases, whereas operation phase is the most dominant phase in the terms of environmental impacts and some of the socio-economic impacts such as human health and economic cost of emissions. Electric vehicles have less air pollution cost and human health impacts compared to conventional gasoline vehicles. The economic cost of emissions and human health impact reduction potential can be up to 45% and 35%, respectively, if electric vehicles are charged through solar charging stations. Electric vehicles have potential to generate income for low and medium skilled workers in the U.S. In addition to quantified sustainability indicators, some sustainability metrics were developed to compare relative sustainability performance alternative passenger vehicles. BEV has the lowest greenhouse gas emissions and ecological land footprint per $ of its contribution to the U.S. GDP, and has the lowest ecological footprint per unit of its energy consumption. The

  11. The impact of changing technology on the demand for air transportation

    Science.gov (United States)

    Kneafsey, J. T.; Taneja, N. K.

    1978-01-01

    Demand models for air transportation that are sensitive to the impact of changing technology were developed. The models are responsive to potential changes in technology, and to changing economic, social, and political factors as well. In addition to anticipating the wide differences in the factors influencing the demand for long haul and short haul air travel, the models were designed to clearly distinguish among the unique features of these markets.

  12. Technical Data Management Center: a focal point for meteorological and other environmental transport computing technology

    International Nuclear Information System (INIS)

    McGill, B.; Maskewitz, B.F.; Trubey, D.K.

    1981-01-01

    The Technical Data Management Center, collecting, packaging, analyzing, and distributing information, computer technology and data which includes meteorological and other environmental transport work is located at the Oak Ridge National Laboratory, within the Engineering Physics Division. Major activities include maintaining a collection of computing technology and associated literature citations to provide capabilities for meteorological and environmental work. Details of the activities on behalf of TDMC's sponsoring agency, the US Nuclear Regulatory Commission, are described

  13. Transportation Security Administration

    Science.gov (United States)

    ... content Official website of the Department of Homeland Security Transportation Security Administration A - Z Index Blog What Can I ... Search form Search the Site Main menu Travel Security Screening Special Procedures TSA Pre✓® Passenger Support Travel ...

  14. Transport statistics 1996

    CSIR Research Space (South Africa)

    Shepperson, L

    1997-12-01

    Full Text Available This publication contains transport and related statistics on roads, vehicles, infrastructure, passengers, freight, rail, air, maritime and road traffic, and international comparisons. The information compiled in this publication has been gathered...

  15. Integrated energy planning for transportation sector-A case study for Iran with techno-economic approach

    Energy Technology Data Exchange (ETDEWEB)

    Sadeghi, Mehdi [Economics Department, Imam Sadiq University, Tehran (Iran, Islamic Republic of)], E-mail: Sadeghi@isu.ac.ir; Mirshojaeian Hosseini, Hossein [Tehran University, Tehran (Iran, Islamic Republic of)], E-mail: mirshojaeian@ut.ac.ir

    2008-02-15

    Transportation sectors in developing countries suffer from some diseases that one of them is ever-increasing energy consumption. Integrated National Energy Planning (INEP) in transportation sector is a solution for these countries to alter their suboptimal pattern and rationalize their energy consumption. One of the INEP targets is determining optimal patterns of fuels and transportation technologies to satisfy future demand of freight and passenger transportation at the lowest cost levels. Following the above target, this paper is concerned with the optimal consumption pattern of fuels focusing on vehicle technologies within the next 25 years (up to 2029). Using Energy Flow Optimization Model-ENVironment (EFOM-ENV) model, various steps as designing of 'Reference Energy System (RES)' of the model, data processing and scenario analysis are followed. Based on the modeling results, substitution of urban railroad technologies (subway, LRT and monorail), all of passenger CNG technologies (cars, buses and minibuses), rural railroad freight technologies (electrical, gas oil and LNG freight trains) and finally, CNG and LNG heavy and light trucks with current passenger and freight vehicle technologies are suggested. This scenario will decline fuel consumption by about 14% totally, that the most part of it belongs to gasoline and gas oil (24% and 17%, respectively). Total discounted cost of transportation system will decline from 806.20 to 691.74 billion dollars (14%) during the time horizon.

  16. Integrated energy planning for transportation sector-A case study for Iran with techno-economic approach

    International Nuclear Information System (INIS)

    Sadeghi, Mehdi; Mirshojaeian Hosseini, Hossein

    2008-01-01

    Transportation sectors in developing countries suffer from some diseases that one of them is ever-increasing energy consumption. Integrated National Energy Planning (INEP) in transportation sector is a solution for these countries to alter their suboptimal pattern and rationalize their energy consumption. One of the INEP targets is determining optimal patterns of fuels and transportation technologies to satisfy future demand of freight and passenger transportation at the lowest cost levels. Following the above target, this paper is concerned with the optimal consumption pattern of fuels focusing on vehicle technologies within the next 25 years (up to 2029). Using Energy Flow Optimization Model-ENVironment (EFOM-ENV) model, various steps as designing of 'Reference Energy System (RES)' of the model, data processing and scenario analysis are followed. Based on the modeling results, substitution of urban railroad technologies (subway, LRT and monorail), all of passenger CNG technologies (cars, buses and minibuses), rural railroad freight technologies (electrical, gas oil and LNG freight trains) and finally, CNG and LNG heavy and light trucks with current passenger and freight vehicle technologies are suggested. This scenario will decline fuel consumption by about 14% totally, that the most part of it belongs to gasoline and gas oil (24% and 17%, respectively). Total discounted cost of transportation system will decline from 806.20 to 691.74 billion dollars (14%) during the time horizon

  17. Panorama 2009 - trends and challenges in passenger mobility

    International Nuclear Information System (INIS)

    2008-01-01

    Current demand for mobility encourages people to seek fast, individual means of transport. The automobile accounts for the bulk of passenger travel worldwide. This mode of transport is a source of annoying and harmful effects including noise, accidents, deteriorating infrastructure, traffic congestion and pollution (local and atmospheric). Some of these issues are now under regulation and have become less acute, but traffic congestion and greenhouse gas emissions are still major problems. Before assessing any policy undertaken to curb nuisance levels and harmful effects, one must be familiar with global mobility trends and the challenges involved

  18. Passenger thermal perceptions, thermal comfort requirements, and adaptations in short- and long-haul vehicles.

    Science.gov (United States)

    Lin, Tzu-Ping; Hwang, Ruey-Lung; Huang, Kuo-Tsang; Sun, Chen-Yi; Huang, Ying-Che

    2010-05-01

    While thermal comfort in mass transportation vehicles is relevant to service quality and energy consumption, benchmarks for such comfort that reflect the thermal adaptations of passengers are currently lacking. This study reports a field experiment involving simultaneous physical measurements and a questionnaire survey, collecting data from 2,129 respondents, that evaluated thermal comfort in short- and long-haul buses and trains. Experimental results indicate that high air temperature, strong solar radiation, and low air movement explain why passengers feel thermally uncomfortable. The overall insulation of clothing worn by passengers and thermal adaptive behaviour in vehicles differ from those in their living and working spaces. Passengers in short-haul vehicles habitually adjust the air outlets to increase thermal comfort, while passengers in long-haul vehicles prefer to draw the drapes to reduce discomfort from extended exposure to solar radiation. The neutral temperatures for short- and long-haul vehicles are 26.2 degrees C and 27.4 degrees C, while the comfort zones are 22.4-28.9 degrees C and 22.4-30.1 degrees C, respectively. The results of this study provide a valuable reference for practitioners involved in determining the adequate control and management of in-vehicle thermal environments, as well as facilitating design of buses and trains, ultimately contributing to efforts to achieve a balance between the thermal comfort satisfaction of passengers and energy conserving measures for air-conditioning in mass transportation vehicles.

  19. An Airline-Based Multilevel Analysis of Airfare Elasticity for Passenger Demand

    Science.gov (United States)

    Castelli, Lorenzo; Ukovich, Walter; Pesenti, Raffaele

    2003-01-01

    Price elasticity of passenger demand for a specific airline is estimated. The main drivers affecting passenger demand for air transportation are identified. First, an Ordinary Least Squares regression analysis is performed. Then, a multilevel analysis-based methodology to investigate the pattern of variation of price elasticity of demand among the various routes of the airline under study is proposed. The experienced daily passenger demands on each fare-class are grouped for each considered route. 9 routes were studied for the months of February and May in years from 1999 to 2002, and two fare-classes were defined (business and economy). The analysis has revealed that the airfare elasticity of passenger demand significantly varies among the different routes of the airline.

  20. Modeling and Simulating Passenger Behavior for a Station Closure in a Rail Transit Network

    Science.gov (United States)

    Yin, Haodong; Han, Baoming; Li, Dewei; Wu, Jianjun; Sun, Huijun

    2016-01-01

    A station closure is an abnormal operational situation in which the entrances or exits of a rail transit station have to be closed for some time due to an unexpected incident. A novel approach is developed to estimate the impacts of the alternative station closure scenarios on both passenger behavioral choices at the individual level and passenger demand at the disaggregate level in a rail transit network. Therefore, the contributions of this study are two-fold: (1) A basic passenger behavior optimization model is mathematically constructed based on 0–1 integer programming to describe passengers’ responses to alternative origin station closure scenarios and destination station closure scenarios; this model also considers the availability of multi-mode transportation and the uncertain duration of the station closure; (2) An integrated solution algorithm based on the passenger simulation is developed to solve the proposed model and to estimate the effects of a station closure on passenger demand in a rail transit network. Furthermore, 13 groups of numerical experiments based on the Beijing rail transit network are performed as case studies with 2,074,267 records of smart card data. The comparisons of the model outputs and the manual survey show that the accuracy of our proposed behavior optimization model is approximately 80%. The results also show that our model can be used to capture the passenger behavior and to quantitatively estimate the effects of alternative closure scenarios on passenger flow demand for the rail transit network. Moreover, the closure duration and its overestimation greatly influence the individual behavioral choices of the affected passengers and the passenger demand. Furthermore, if the rail transit operator can more accurately estimate the closure duration (namely, as g approaches 1), the impact of the closure can be somewhat mitigated. PMID:27935963

  1. METHODICAL APPROACH TO DEFINING INFRASTRUCTURE COMPONENT OF THE COSTS FOR THE PARTICULAR PASSENGER TRAIN TRAFFIC

    Directory of Open Access Journals (Sweden)

    Yu. S. Barash

    2015-06-01

    Full Text Available Purpose. In the scientific paper a methodical approach concerning determining the infrastructure component of the costs for traffic of the particular passenger train should be developed. It takes into account the individual characteristics of the particular train traffic. Methodology. To achieve the research purposes was used a method which is based on apportionment of expenses for the traffic of a particular passenger train taking into account the factors affecting the magnitude of costs. This methodology allows allocating properly infrastructure costs for a particular train and, consequently, to determine the accurate profitability of each train. Findings. All expenditures relating to passenger traffic of a long distance were allocated from first cost of passenger and freight traffic. These costs are divided into four components. Three groups of expenses were allocated in infrastructure component, which are calculated according to the certain principle taking into account the individual characteristics of the particular train traffic. Originality. The allocation method of all passenger transportation costs of all Ukrzaliznytsia departments for a particular passenger train was improved. It is based on principles of general indicators formation of each department costs, which correspond to the main influential factors of operating trains. The methodical approach to determining the cost of infrastructure component is improved, which takes into account the effect of the speed and weight of a passenger train on the wear of the railway track superstructure and contact network. All this allows allocating to reasonably the costs of particular passenger train traffic and to determine its profitability. Practical value. Implementing these methods allows calculating the real, economically justified costs of a particular train that will correctly determine the profitability of a particular passenger train and on this basis it allows to make management

  2. Border-wide assessment of intelligent transportation system (ITS) technology : current and future concepts.

    Science.gov (United States)

    2012-07-01

    The purpose of this effort was to conduct a border-wide assessment of the use of intelligent transportation systems (ITS) technologies and operational concepts at and near land border crossings between the U.S. and Mexico. The work focused on tolling...

  3. Hyperloop: The Future of Transportation

    KAUST Repository

    Ahlborn, Dirk

    2017-01-11

    What is Hyperloop? Hyperloop is a new way to move people or things anywhere in the world quickly, safely, efficiently, on-demand and with minimal impact to the environment. The system, using updated technologies, by Elon Musk, relies on electric propulsion to accelerate a passenger or cargo vehicle through a tube in a low-pressure environment. The autonomous vehicle levitates slightly above the track and glides at faster-than-airline speeds over long distances. We eliminate direct emissions, noise, delay, weather concerns and pilot error. Itメs the next mode of transportation.

  4. Fuel-cycle greenhouse gas emissions impacts of alternative transportation fuels and advanced vehicle technologies.

    Energy Technology Data Exchange (ETDEWEB)

    Wang, M. Q.

    1998-12-16

    At an international conference on global warming, held in Kyoto, Japan, in December 1997, the United States committed to reduce its greenhouse gas (GHG) emissions by 7% over its 1990 level by the year 2012. To help achieve that goal, transportation GHG emissions need to be reduced. Using Argonne's fuel-cycle model, I estimated GHG emissions reduction potentials of various near- and long-term transportation technologies. The estimated per-mile GHG emissions results show that alternative transportation fuels and advanced vehicle technologies can help significantly reduce transportation GHG emissions. Of the near-term technologies evaluated in this study, electric vehicles; hybrid electric vehicles; compression-ignition, direct-injection vehicles; and E85 flexible fuel vehicles can reduce fuel-cycle GHG emissions by more than 25%, on the fuel-cycle basis. Electric vehicles powered by electricity generated primarily from nuclear and renewable sources can reduce GHG emissions by 80%. Other alternative fuels, such as compressed natural gas and liquefied petroleum gas, offer limited, but positive, GHG emission reduction benefits. Among the long-term technologies evaluated in this study, conventional spark ignition and compression ignition engines powered by alternative fuels and gasoline- and diesel-powered advanced vehicles can reduce GHG emissions by 10% to 30%. Ethanol dedicated vehicles, electric vehicles, hybrid electric vehicles, and fuel-cell vehicles can reduce GHG emissions by over 40%. Spark ignition engines and fuel-cell vehicles powered by cellulosic ethanol and solar hydrogen (for fuel-cell vehicles only) can reduce GHG emissions by over 80%. In conclusion, both near- and long-term alternative fuels and advanced transportation technologies can play a role in reducing the United States GHG emissions.

  5. Fuel-cycle greenhouse gas emissions impacts of alternative transportation fuels and advanced vehicle technologies

    International Nuclear Information System (INIS)

    Wang, M. Q.

    1998-01-01

    At an international conference on global warming, held in Kyoto, Japan, in December 1997, the United States committed to reduce its greenhouse gas (GHG) emissions by 7% over its 1990 level by the year 2012. To help achieve that goal, transportation GHG emissions need to be reduced. Using Argonne's fuel-cycle model, I estimated GHG emissions reduction potentials of various near- and long-term transportation technologies. The estimated per-mile GHG emissions results show that alternative transportation fuels and advanced vehicle technologies can help significantly reduce transportation GHG emissions. Of the near-term technologies evaluated in this study, electric vehicles; hybrid electric vehicles; compression-ignition, direct-injection vehicles; and E85 flexible fuel vehicles can reduce fuel-cycle GHG emissions by more than 25%, on the fuel-cycle basis. Electric vehicles powered by electricity generated primarily from nuclear and renewable sources can reduce GHG emissions by 80%. Other alternative fuels, such as compressed natural gas and liquefied petroleum gas, offer limited, but positive, GHG emission reduction benefits. Among the long-term technologies evaluated in this study, conventional spark ignition and compression ignition engines powered by alternative fuels and gasoline- and diesel-powered advanced vehicles can reduce GHG emissions by 10% to 30%. Ethanol dedicated vehicles, electric vehicles, hybrid electric vehicles, and fuel-cell vehicles can reduce GHG emissions by over 40%. Spark ignition engines and fuel-cell vehicles powered by cellulosic ethanol and solar hydrogen (for fuel-cell vehicles only) can reduce GHG emissions by over 80%. In conclusion, both near- and long-term alternative fuels and advanced transportation technologies can play a role in reducing the United States GHG emissions

  6. Research Algorithm on Building Intelligent Transportation System based on RFID Technology

    Directory of Open Access Journals (Sweden)

    Chuanqi Chen

    2013-05-01

    Full Text Available Intelligent transportation system to all aspects of organic integration of human, vehicle, road and environment of the transport system, so that the operation of functional integration and intelligent vehicle, road. Intelligent transportation system (ITS to improve the efficiency of traffic system by increasing the effective use and management of traffic information is mainly composed of information collection and input, output, control strategy, implementation of the subsystems of data transmission and communication subsystem. The RFID reader to wireless communication through the antenna and RFID tag can achieve a write operation on the tag identification codes and memory read data. The paper proposes research on building intelligent transportation system based on RFID technology. Experimental results show that ITS system can effectively improve the traffic situation, improve the utilization rate of the existing road resource and save social cost.

  7. The Effect of Passengers on Teen Driver Behavior

    Science.gov (United States)

    2012-04-01

    A number of studies have shown that passengers substantially increase the risk of crashes for young, novice drivers. This increased risk may result from distractions that young passengers create for drivers. Alternatively, the presence of passengers ...

  8. Analysis of bus passenger comfort perception based on passenger load factor and in-vehicle time.

    Science.gov (United States)

    Shen, Xianghao; Feng, Shumin; Li, Zhenning; Hu, Baoyu

    2016-01-01

    Although bus comfort is a crucial indicator of service quality, existing studies tend to focus on passenger load and ignore in-vehicle time, which can also affect passengers' comfort perception. Therefore, by conducting surveys, this study examines passengers' comfort perception while accounting for both factors. Then, using the survey data, it performs a two-way analysis of variance and shows that both in-vehicle time and passenger load significantly affect passenger comfort. Then, a bus comfort model is proposed to evaluate comfort level, followed by a sensitivity analysis. The method introduced in this study has theoretical implications for bus operators attempting to improve bus service quality.

  9. Environmentally sustainable transport in Germany

    International Nuclear Information System (INIS)

    Verron, H.; Friedrich, A.

    2004-01-01

    The study reported in this paper is part of an OECD project with several case studies in different countries. The purpose of the project was to look for possible ways to reduce the environmental impact of transport to a level which is compatible with sustainability. The participants in the case studies agreed upon quantifying criteria for carbon dioxide, nitrogen oxides and volatile organic compounds, which should describe environmentally sustainable transport (EST), and each case study constructed a business-as-usual scenario and three EST scenarios, considering the period from 1990 to 2030. Each EST scenario should meet the criteria in a backcasting effort, EST1 looking for solely technical solutions, EST2 restricting and shifting transport volumes while ignoring technological progress, and EST3 combining components of both strategies. In the German case study criteria were additionally quantified for particulate matter, noise and land-take for transport purposes. The German EST1 scenario is based on hybrid electric hypercars, hydrogen for public transport, freight and aviation, and electricity from renewable sources. In the EST2 scenario total transport activity for passenger and freight transport had to be reduced by 40% and 25% respectively, compared to 1990 in order to meet the criteria. In the EST3 scenario, while highly energy efficient conventional propulsion systems and engines were used, total passenger transport decreased only slightly and freight transport even increased. Implementation measures were then defined on the basis of the EST3 scenario. Emission regulation, fuel tax, and road pricing for heavy duty vehicles were the key features in order to achieve EST in this case study. They were complemented by additional sets of measures, designed to prevent urban sprawl, diminish freight traffic growth, increase liveability of towns, improve the infrastructure and service conditions of alternative modes as well as provide energy supply by regenerative

  10. Young drivers and their young passengers.

    NARCIS (Netherlands)

    2015-01-01

    More than one-third of all fatalities among car passengers occurs in the 10-24-year age group. The majority of these young passengers die in a car driven by an 18 to 24-year old. Compared with the composition of the population, these are high proportions, yet the exposure (for example in distance

  11. Radiation Exposure of Passengers to Cosmic Radiation

    International Nuclear Information System (INIS)

    Salah El-Din, T.; Gomaa, M.A.; Sallah, N.

    2010-01-01

    The main aim of the present study is to review exposure of Egyptian passengers and occupational workers to cosmic radiation during their work. Computed effective dose of passengers by computer code CARI-6 using during either short route, medium route or long route as well as recommended allowed number of flights per year

  12. Applications of ZigBee Technology in the Safety Monitoring System of Low Gas Pipeline Transportation

    Directory of Open Access Journals (Sweden)

    Wei Deyu

    2015-01-01

    Full Text Available The existing safety monitoring system of low gas pipeline transportation establishes a wired communication network monitoring system mainly on the basis of industrial bus. It has problems such as large transmission signal attenuation, complex wiring, high-labor intensity, inconvenient installation and maintenance, high maintenance cost, and so on. Featuring low cost, power-saving, reliability, stability and flexibility, the wireless sensor network established by ZigBee wireless communication technology can realize the real-time all-dimensional dynamic monitoring on parameters of low gas pipeline transportation system and overcome the shortcomings and deficiencies of wired network system.

  13. Test facilities for radioactive material transport packages (AEA Technology plc, Winfrith,UK)

    International Nuclear Information System (INIS)

    Gillard, J.E.

    2001-01-01

    Transport containers for radioactive materials are tested to demonstrate compliance with national and international standards. Transport package design, testing, assessment and approval requires a wide range of skills and facilities. The comprehensive capability of AEA Technology in these areas is described. The facilities described include drop-test cranes and targets (up to 700 tonne); pool fires, furnaces and rigs for thermal tests, including heat dissipation on prototype flasks; shielding facilities; criticality simulations and leak test techniques. These are illustrated with photographs demonstrating the comprehensive nature of package testing services supplied to customers. (author)

  14. Test facilities for radioactive material transport packages (AEA Technology plc, Winfrith,UK)

    Energy Technology Data Exchange (ETDEWEB)

    Gillard, J.E

    2001-07-01

    Transport containers for radioactive materials are tested to demonstrate compliance with national and international standards. Transport package design, testing, assessment and approval requires a wide range of skills and facilities. The comprehensive capability of AEA Technology in these areas is described. The facilities described include drop-test cranes and targets (up to 700 tonne); pool fires, furnaces and rigs for thermal tests, including heat dissipation on prototype flasks; shielding facilities; criticality simulations and leak test techniques. These are illustrated with photographs demonstrating the comprehensive nature of package testing services supplied to customers. (author)

  15. Engine technology challenges for a 21st century high speed civil transport

    Science.gov (United States)

    Shaw, Robert J.

    1991-01-01

    Recent NASA funded studies by Boeing and Douglas suggest an opportunity exists for a 21st Century High Speed Civil Transport (HSCT) to become part of the international air transportation system. However, before this opportunity for high speed travel can be realized, certain environmental and and economic barrier issues must be overcome. These challenges are outlined. Research activities which NASA has planned to address these barrier issues and to provide a technology base to allow U.S. manufacturers to make an informed go/no go decision on developing the HSCT are discussed.

  16. Transport, spatio-economic equilibrium and global sustainability. Markets, technology and policy

    Energy Technology Data Exchange (ETDEWEB)

    Verhoef, E.T.; Van den Bergh, J.C.J.M. [Dep. of Spatial Economics. Fac. of Economics and Econometrics. Vrije Univ., Amsterdam (Netherlands)

    1995-03-01

    Interdependencies between transport, spatial economy, technology and environment are investigated in the context of regulatory environmental policies aiming at meeting a global environmental target, defined in terms of the environmental utilization space as a prerequisite for global sustainability. A small scale model, based on the adapted spatial price equilibrium methodology presented elsewhere was discussed, serving as an illustration of the formal analysis discussed there. Notwithstanding the model`s simplicity, the simulation results are found to be interesting in that they provide some revealing comparative static insights into issues that are believed to be quite important in the formulation of environmental and transport policies. 12 figs., 12 refs.

  17. Wireless Communications in Smart Rail Transportation Systems

    Directory of Open Access Journals (Sweden)

    César Briso-Rodríguez

    2017-01-01

    Full Text Available Railway, subway, airplane, and other transportation systems have drawn an increasing interest on the use of wireless communications for critical and noncritical services to improve performance, reliability, and passengers experience. Smart transportation systems require the use of critical communications for operation and control, and wideband services can be provided using noncritical communications. High speed train (HST is one of the best test cases for the analysis of communication links and specification of the general requirements for train control and supervision, passenger communications, and onboard and infrastructure wireless sensors. In this paper, we analyze in detail critical and noncritical networks mainly using the HST as a test case. First, the different types of links for smart rail transportation are described, specifying the main requirements of the transportation systems, communications, and their applications for different services. Then, we propose a network architecture and requirements of the communication technologies for critical and noncritical data. Finally, an analysis is made for the future technologies, including the fifth-generation (5G communications, millimeter wave (mmWave, terahertz (THz, and satellites for critical and high-capacity communications in transportation.

  18. Transportation energy use in Mexico

    Energy Technology Data Exchange (ETDEWEB)

    Sheinbaum, C.; Meyers, S.; Sathaye, J.

    1994-07-01

    This report presents data on passenger travel and freight transport and analysis of the consequent energy use in Mexico during the 1970--1971 period. We describe changes in modal shares for passenger travel and freight transport, and analyze trends in the energy intensity of different modes. We look in more detail at transportation patterns, energy use, and the related environmental problems in the Mexico City Metropolitan Area, and also discuss policies that have been implemented there to reduce emissions from vehicles.

  19. Technology data for energy plants. Individual heating plants and energy transport

    Energy Technology Data Exchange (ETDEWEB)

    2012-05-15

    The present technology catalogue is published in co-operation between the Danish Energy Agency and Energinet.dk and includes technology descriptions for a number of technologies for individual heat production and energy transport. The primary objective of the technology catalogue is to establish a uniform, commonly accepted and up-to-date basis for the work with energy planning and the development of the energy sector, including future outlooks, scenario analyses and technical/economic analyses. The technology catalogue is thus a valuable tool in connection with energy planning and assessment of climate projects and for evaluating the development opportunities for the energy sector's many technologies, which can be used for the preparation of different support programmes for energy research and development. The publication of the technology catalogue should also be viewed in the light of renewed focus on strategic energy planning in municipalities etc. In that respect, the technology catalogue is considered to be an important tool for the municipalities in their planning efforts. (LN)

  20. Concept Layout Model of Transportation Terminals

    OpenAIRE

    Yao, Li-ya; Sun, Li-shan; Wang, Wu-hong; Xiong, Hui

    2012-01-01

    Transportation terminal is the key node in transport systems. Efficient terminals can improve operation of passenger transportation networks, adjust the layout of public transportation networks, provide a passenger guidance system, and regulate the development of commercial forms, as well as optimize the assembly and distribution of modern logistic modes, among others. This study aims to clarify the relationship between the function and the structure of transportation terminals and establish ...

  1. Energy policy in transport and transport policy

    International Nuclear Information System (INIS)

    Van Dender, Kurt

    2009-01-01

    Explanations for, and indirect evidence of, imperfections in the market for private passenger vehicle fuel economy suggest there is a reasonable case for combining fuel economy standards and fuel or carbon taxes to contribute to an energy policy that aims to reduce greenhouse gas emissions and improve energy security. Estimates of key elasticities, including the rebound effect, indicate that the positive and negative side-effects of fuel economy measures on transport activities and external costs are limited. However, an energy policy for transport does not replace a transport policy that aims to manage the main transport externalities including congestion and local pollution. Conventional marginal cost estimates and standard cost-benefit reasoning suggest that policies that address congestion and local pollution likely bring benefits at least as large as those from fuel economy measures. But the large uncertainty on the possible effects of greenhouse gas emissions constitutes a strong challenge for standard cost-benefit reasoning. Emerging results from methods to cope with this uncertainty suggest that policies to stimulate the widespread adoption of low-carbon technologies in transport are justified.

  2. Energy policy in transport and transport policy

    Energy Technology Data Exchange (ETDEWEB)

    Van Dender, Kurt [Joint Transport Research Centre of the International Transport Forum and the OECD, 2 rue Andre Pascale, F-75775 Paris Cedex 16 (France)

    2009-10-15

    Explanations for, and indirect evidence of, imperfections in the market for private passenger vehicle fuel economy suggest there is a reasonable case for combining fuel economy standards and fuel or carbon taxes to contribute to an energy policy that aims to reduce greenhouse gas emissions and improve energy security. Estimates of key elasticities, including the rebound effect, indicate that the positive and negative side-effects of fuel economy measures on transport activities and external costs are limited. However, an energy policy for transport does not replace a transport policy that aims to manage the main transport externalities including congestion and local pollution. Conventional marginal cost estimates and standard cost-benefit reasoning suggest that policies that address congestion and local pollution likely bring benefits at least as large as those from fuel economy measures. But the large uncertainty on the possible effects of greenhouse gas emissions constitutes a strong challenge for standard cost-benefit reasoning. Emerging results from methods to cope with this uncertainty suggest that policies to stimulate the widespread adoption of low-carbon technologies in transport are justified. (author)

  3. Measurement and evaluation of alpha radioactivity using ionized air transport technology

    International Nuclear Information System (INIS)

    Maekawa, Tatsuyuki; Yamaguchi, Hiromi

    2009-01-01

    A novel alpha radioactivity monitor using ionized air transport technology has been developed for future constitution of 'clearance level' for uranium and TRU radioactive waste. This technology will bring paradigm shift on alpha-ray measurement, such as converting 'closely contacting and scanning measurement' to 'remotely contacting measurement in the block', and drastically improve the efficiency of measurement operation. In this article, the origin and chronicle of this technology were simply explained and our newest accomplishment was described. Furthermore, using measurement data obtained in our development process, measurement and evaluation examples of alpha radioactivity were shown for practical operations as informative guides. We hope that this technology will be widely endorsed as a practical method for alpha clearance measurement in the near future. (author)

  4. Optimal Path Choice in Railway Passenger Travel Network Based on Residual Train Capacity

    Directory of Open Access Journals (Sweden)

    Fei Dou

    2014-01-01

    Full Text Available Passenger’s optimal path choice is one of the prominent research topics in the field of railway passenger transport organization. More and more different train types are available, increasing path choices from departure to destination for travelers are unstoppable. However, travelers cannot avoid being confused when they hope to choose a perfect travel plan based on various travel time and cost constraints before departure. In this study, railway passenger travel network is constructed based on train timetable. Both the generalized cost function we developed and the residual train capacity are considered to be the foundation of path searching procedure. The railway passenger travel network topology is analyzed based on residual train capacity. Considering the total travel time, the total travel cost, and the total number of passengers, we propose an optimal path searching algorithm based on residual train capacity in railway passenger travel network. Finally, the rationale of the railway passenger travel network and the optimal path generation algorithm are verified positively by case study.

  5. Location Planning for Dynamic Wireless Charging Systems for Electric Airport Passenger Buses

    Directory of Open Access Journals (Sweden)

    Stefan Helber

    2018-01-01

    Full Text Available The majority of the ground vehicles operating on the airside parts of commercial airports are currently powered by diesel engines. These include vehicles such as apron buses, fuel trucks, and aircraft tractors. Hence, these vehicles contribute to the overall CO 2 emissions of the aviation transport system and thus negatively influence its environmental footprint. To reduce this damaging environmental impact, these vehicles could potentially be electrified with on-board batteries as their energy sources. However, the conductive charging of such vehicles via stationary cable connections is rather time-consuming. A dynamic wireless charging system to supply public transportation passenger buses with electric energy while in motion has recently been installed on the Korea Advanced Institute of Science and Technology (KAIST campus and in the Korean city of Gumi. In this paper, we study configuration problems related to the use of this technology to make airport operations more environmentally sustainable. We concentrate on the power supply for apron buses and analyze the location planning problems related to the distribution of the required power supply and the wireless charging units in the apron road system. To this end, we develop a formal optimization model and discuss the first numerical results.

  6. Path creation in Nordic energy and road transport systems – The role of technological characteristics

    DEFF Research Database (Denmark)

    Hansen, Teis; Klitkou, Antje; Borup, Mads

    2017-01-01

    This paper reviews path-creation processes in road transport systems in the Nordic countries: e-mobility in Denmark, hydrogen and fuel-cell electrical vehicles in Norway, and advanced biofuels in Finland and Sweden. The study builds on the path creation literature, which seeks to explain the emer......This paper reviews path-creation processes in road transport systems in the Nordic countries: e-mobility in Denmark, hydrogen and fuel-cell electrical vehicles in Norway, and advanced biofuels in Finland and Sweden. The study builds on the path creation literature, which seeks to explain...... the emergence of new technological pathways. Drawing on recent insights concerning the differences between design- and manufacturing-intensive technologies, the paper analyses the influence of technological characteristics on path creation processes. The case comparison indicates that technological...... characteristics seem to have greater influence on the content of activities in the later phase rather than the early phase of path creation processes. The analysis also emphasises that barriers to path creation processes differ depending on technological characteristics. This highlights the importance...

  7. Workshop on Critical Issues in Microgravity Fluids, Transport, and Reaction Processes in Advanced Human Support Technology

    Science.gov (United States)

    Chiaramonte, Francis P.; Joshi, Jitendra A.

    2004-01-01

    This workshop was designed to bring the experts from the Advanced Human Support Technologies communities together to identify the most pressing and fruitful areas of research where success hinges on collaborative research between the two communities. Thus an effort was made to bring together experts in both advanced human support technologies and microgravity fluids, transport and reaction processes. Expertise was drawn from academia, national laboratories, and the federal government. The intent was to bring about a thorough exchange of ideas and develop recommendations to address the significant open design and operation issues for human support systems that are affected by fluid physics, transport and reaction processes. This report provides a summary of key discussions, findings, and recommendations.

  8. Recent Cooperative Research Activities of HDD and Flexible Media Transport Technologies in Japan

    Science.gov (United States)

    Ono, Kyosuke

    This paper presents the recent status of industry-university cooperative research activities in Japan on the mechatronics of information storage and input/output equipment. There are three research committees for promoting information exchange on technical problems and research topics of head-disk interface in hard disk drives (HDD), flexible media transport and image printing processes which are supported by the Japan Society of Mechanical Engineering (JSME), the Japanese Society of Tribologists (JAST) and the Japan Society of Precision Engineering (JSPE). For hard disk drive technology, the Storage Research Consortium (SRC) is supporting more than 40 research groups in various different universities to perform basic research for future HDD technology. The past and present statuses of these activities are introduced, particularly focusing on HDD and flexible media transport mechanisms.

  9. Test facilities for radioactive material transport packages (AEA Technology, Winfrith, UK)

    International Nuclear Information System (INIS)

    Burgess, M.H.

    1991-01-01

    Transport packages for radioactive materials are tested to demonstrate compliance with national and international regulations. The involvement of AEA Technology is traced from the establishment of the early IAEA Regulations. Transport package design, testing, assessment and approval requires a wide variety of skills and facilities. The comprehensive capability of AEA Technology in these areas is described with references to practical experience in the form of a short bibliography. The facilities described include drop-test cranes and targets (up to 700te); air guns for impacts up to sonic velocities; pool fires, furnaces and rigs for thermal tests including heat dissipation on prototype flasks; shielding facilities and instruments; criticality simulations and leak test instruments. These are illustrated with photographs demonstrating the comprehensive nature of package testing services supplied to customers. (author)

  10. Key technology studies of GY-20 and GY-40 High-capacity cobalt-60 transport casks

    International Nuclear Information System (INIS)

    Liu Huifang; Zhang Xin

    2012-01-01

    GY-20 and GY-40 high-capacity cobalt-60 transport casks are used to transport cobalt-60 industrial irradiators and cobalt-60 bundles. The radioactive contents have special features of high-activity and high residual heat, so only a few countries such as Canada, England and Russia have design capacity. The key technologies and corresponding solutions were studied for the design and manufacture of the cask taking into account the structural, thermal, mechanics and shield requests. A series of tests prove that the cask structure design, design criteria for lead coating structure and quality control measurements are reasonable and effective, and the cask shield integrity can be ensured for all conditions. The casks have ability to transport high-activity sealed sources safely, and the design of cask satisfies the requirement of design code and standard. It can provide reference for other B type package. (authors)

  11. Application of fuzzy neural network technologies in management of transport and logistics processes in Arctic

    Science.gov (United States)

    Levchenko, N. G.; Glushkov, S. V.; Sobolevskaya, E. Yu; Orlov, A. P.

    2018-05-01

    The method of modeling the transport and logistics process using fuzzy neural network technologies has been considered. The analysis of the implemented fuzzy neural network model of the information management system of transnational multimodal transportation of the process showed the expediency of applying this method to the management of transport and logistics processes in the Arctic and Subarctic conditions. The modular architecture of this model can be expanded by incorporating additional modules, since the working conditions in the Arctic and the subarctic themselves will present more and more realistic tasks. The architecture allows increasing the information management system, without affecting the system or the method itself. The model has a wide range of application possibilities, including: analysis of the situation and behavior of interacting elements; dynamic monitoring and diagnostics of management processes; simulation of real events and processes; prediction and prevention of critical situations.

  12. Technology status review and carbon abatement potential of renewable transport fuels in the UK

    Energy Technology Data Exchange (ETDEWEB)

    Woods, J; Bauen, A

    2003-07-01

    The document reviews the technology for the production of renewable transport fuels (RTFs) and includes a discussion on the costs of the different RTF options and the role they might play in helping reduce emissions of greenhouse gases. The motivation for using RTFs in the UK are (1) to reduce transport sector costs; (2) reduce greenhouse gas emissions; (3) improve air quality; (4) improve energy security in the transport sector and (5) assist rural development through domestic production of biomass-based fuels. The RTFs of most interest at present are ethanol produced in the fermentation of sugar and starchy crops, and biodiesel from oil crops. Figures for the UK potential for RTFs are given. It is pointed out however that given the finite availability of renewable sources and the competition for other applications, the use of RTFs will need to be efficient for sustainability. The report was prepared by Imperial College London as part of the DTI New and Renewable Energy Programme.

  13. Mobility chains analysis of technologies for passenger cars and light duty vehicles fueled with biofuels : application of the Greet model to project the role of biomass in America's energy future (RBAEF) project.

    Energy Technology Data Exchange (ETDEWEB)

    Wu, M.; Wu, Y.; Wang, M; Energy Systems

    2008-01-31

    The Role of Biomass in America's Energy Future (RBAEF) is a multi-institution, multiple-sponsor research project. The primary focus of the project is to analyze and assess the potential of transportation fuels derived from cellulosic biomass in the years 2015 to 2030. For this project, researchers at Dartmouth College and Princeton University designed and simulated an advanced fermentation process to produce fuel ethanol/protein, a thermochemical process to produce Fischer-Tropsch diesel (FTD) and dimethyl ether (DME), and a combined heat and power plant to co-produce steam and electricity using the ASPEN Plus{trademark} model. With support from the U.S. Department of Energy (DOE), Argonne National Laboratory (ANL) conducted, for the RBAEF project, a mobility chains or well-to-wheels (WTW) analysis using the Greenhouse gases, Regulated Emissions, and Energy use in Transportation (GREET) model developed at ANL. The mobility chains analysis was intended to estimate the energy consumption and emissions associated with the use of different production biofuels in light-duty vehicle technologies.

  14. A robust transfer inference algorithm for public transport journeys during disruptions

    NARCIS (Netherlands)

    Yap, M.D.; Cats, O.; van Oort, N.; Hoogendoorn, S.P.

    2017-01-01

    Disruptions in public transport have major impact on passengers and disproportional effects on passenger satisfaction. The availability of smart card data gives opportunities to better quantify disruption impacts on passengers’ experienced journey travel time and comfort. For this, accurate journey

  15. Digital Advertising System in Urban Transport System of Žilina Town

    Directory of Open Access Journals (Sweden)

    Madleňák Radovan

    2014-09-01

    Full Text Available The Internet and information and communication technologies (ICT have changed everything: news, commerce, advertising, relating to others, getting information and transport too. It has changed how the people work, how they practice religion, how they date, how they spend the free time and how they travel. One of the technological innovations that are based on usage ICT in advertising space is digital signage. This article presents the results of research dedicated to investigate the relationships between customers-passengers and this new ICT technology in real environment. The results of the research stimulate the discussion about the future advertising practices in Žilina town. Based on the wide analysis of opportunities the digital signage technology in advertising practices, the presented marketing research investigates how passengers accept virtual advertising technology in urban transport system of Žilina town. Authors highlight the advantages of interactivity between digital signage technology and consumers. The conclusions of this article triggers further investigations in the area of the interactions between the digital advertising technology and passengers, and the passengers’ perception and acceptation of shopping activities on the basis of advertising in digital signage medias.

  16. Climate change : transportation table

    International Nuclear Information System (INIS)

    Ogilvie, K.

    1999-01-01

    The Kyoto Protocol sets greenhouse gas (GHG) reduction targets for the post-2000 period. If ratified, Canada will be committed to reduce emissions of GHGs by 6 per cent below 1990 levels during the period 2008-2012. A recommended national strategy is to establish 'issue tables' that will advise the Ministers of Energy and Environment on preferred options to reach the Kyoto target and to identify early actions that can be taken. The 'Transportation Table' which is the focus of this paper, is one of the 15 sectoral tables. The Transportation Table will identify by July 1999, specific measures to mitigate GHG emissions from Canada's transportation sector. Currently, GHG emissions from the transportation sector are predicted to be 27 per cent above 1990 levels by 2010. Fuel taxes, emissions trading, and research into improved vehicle technologies and automotive fuels are some of the recommended options which can help reduce emissions trading from the transportation sector. Studies are underway to deal with emissions from transport in two sub-groups, freight and passenger. 1 fig

  17. Influence of methane in CO2 transport and storage for CCS technology.

    Science.gov (United States)

    Blanco, Sofía T; Rivas, Clara; Fernández, Javier; Artal, Manuela; Velasco, Inmaculada

    2012-12-04

    CO(2) Capture and Storage (CCS) is a good strategy to mitigate levels of atmospheric greenhouse gases. The type and quantity of impurities influence the properties and behavior of the anthropogenic CO(2), and so must be considered in the design and operation of CCS technology facilities. Their study is necessary for CO(2) transport and storage, and to develop theoretical models for specific engineering applications to CCS technology. In this work we determined the influence of CH(4), an important impurity of anthropogenic CO(2), within different steps of CCS technology: transport, injection, and geological storage. For this, we obtained new pressure-density-temperature (PρT) and vapor-liquid equilibrium (VLE) experimental data for six CO(2) + CH(4) mixtures at compositions which represent emissions from the main sources in the European Union and United States. The P and T ranges studied are within those estimated for CO(2) pipelines and geological storage sites. From these data we evaluated the minimal pressures for transport, regarding the density and pipeline's capacity requirements, and values for the solubility parameter of the mixtures, a factor which governs the solubility of substances present in the reservoir before injection. We concluded that the presence of CH(4) reduces the storage capacity and increases the buoyancy of the CO(2) plume, which diminishes the efficiency of solubility and residual trapping of CO(2), and reduces the injectivity into geological formations.

  18. Advanced transport systems analysis, modeling, and evaluation of performances

    CERN Document Server

    Janić, Milan

    2014-01-01

    This book provides a systematic analysis, modeling and evaluation of the performance of advanced transport systems. It offers an innovative approach by presenting a multidimensional examination of the performance of advanced transport systems and transport modes, useful for both theoretical and practical purposes. Advanced transport systems for the twenty-first century are characterized by the superiority of one or several of their infrastructural, technical/technological, operational, economic, environmental, social, and policy performances as compared to their conventional counterparts. The advanced transport systems considered include: Bus Rapid Transit (BRT) and Personal Rapid Transit (PRT) systems in urban area(s), electric and fuel cell passenger cars, high speed tilting trains, High Speed Rail (HSR), Trans Rapid Maglev (TRM), Evacuated Tube Transport system (ETT), advanced commercial subsonic and Supersonic Transport Aircraft (STA), conventionally- and Liquid Hydrogen (LH2)-fuelled commercial air trans...

  19. Access improvement to aircraft passengers' hand luggage.

    Science.gov (United States)

    Alberda, W; Kampinga, O; Kassels, R; van Kester, R; Noriega, J; Vink, P

    2015-01-01

    Efficient use of space and passenger comfort in aircraft interiors are major issues. There is not much research available about the flying experience regarding passengers' personal belongings. The objective of this study is to explore concepts within the current aircraft seats which improve the passenger experience related to their personal belongings like wallets, mobile phones and laptops. Through on-site observations, interviews and online questionnaires, data regarding the number of personal belongings taken into the airplane and opinions about access to hand luggage were gathered. These data were used to develop different concepts to optimize the aircraft interior, which were evaluated by passengers. Almost every passenger carries a phone (88%), wallet (94%), travel documents (98%) and keys (76%) with them and they like to have these stored close by. Passengers rate the concept that provides integrated storage in the tray table of the aircraft seat the best. Extra storage possibility in the table-tray seems a promising solution according to the passengers.

  20. Potential of greenhouse gas emission reduction in Thai road transport by ethanol bus technology

    International Nuclear Information System (INIS)

    Chollacoop, Nuwong; Saisirirat, Peerawat; Sukkasi, Sittha; Tongroon, Manida; Fukuda, Tuenjai; Fukuda, Atsushi; Nivitchanyong, Siriluck

    2013-01-01

    Highlights: ► Energy demand modeling in Thai road transportation sector was developed. ► Such model was used to assess environment impact by ethanol bus technology (ED95). ► Ethanol bus technology (ED95) shows beneficial impacts to Thailand. ► Increase in ethanol demand and decrease in GHG emission in Thailand by ethanol bus. ► Ethanol bus (ED95) has been successfully demonstrated in Thailand. -- Abstract: Over decades, Thailand energy consumption has been concentrated in three main sectors, namely manufacturing, power and transportation. Energy consumption in transportation sector has also been dominated by road transport due to limited coverage by rail and water transportation. Hence, road transport has been a major contributor for greenhouse gas emission in Thailand over recent years. Along with global warming concern throughout the world, Thailand has taken various adaptation and mitigation measures, especially the strong policy push to use carbon–neutral biofuel in transportation sector due to Thailand competitive advantage in agriculture sector. National Renewable Energy Plan (2008–2022) has set challenging targets of 9 and 4.5 million liters/day of ethanol and biodiesel consumption by 2022, respectively. Various blends of ethanol in gasoline (10%, 20% and 85%) and biodiesel in diesel (up to 5%) have been commercially available. However, since current consumption of diesel is twice as much of gasoline, ethanol blend in gasoline would widen the imbalance consumption of gasoline and diesel. The present study however offers an insight into a possibility to use ethanol as diesel substitute. A case study of ethanol bus technology was investigated by recourse to energy demand modeling. Necessary data, such as a number of vehicles (NVs) for various vehicle types, vehicle kilometer of travel (VKT) and fuel economy (FE) were collected, with reasonable assumptions made for those unavailable data, to construct predicative energy demand model. Scenario