Comparison of airline passenger oxygen systems.

Science.gov (United States)

Byrne, N J

1995-08-01

The principal sources of oxygen for inflight passenger use, scheduled and unscheduled, are examined. Present practices of assessment of the passenger's "fitness to fly" are described. Three partner airlines, British Airways, U.S. Air, and Qantas, catering for more than 8000 oxygen requests annually, are compared. Analysis of customer use suggests that medical oxygen requests are frequently not clinically justified. The growth in demand, for both scheduled and unscheduled use of an expensive resource, supports the need for a "recommended best practice" among carriers. Passengers with respiratory disorders who will most benefit from inflight oxygen are vulnerable either to hypoxia or asthma.

39 CFR 3050.26 - Documentation of demand elasticities and volume forecasts.

Science.gov (United States)

2010-07-01

... 39 Postal Service 1 2010-07-01 2010-07-01 false Documentation of demand elasticities and volume... § 3050.26 Documentation of demand elasticities and volume forecasts. By January 20 of each year, the Postal Service shall provide econometric estimates of demand elasticity for all postal products...

78 FR 16036 - Service Level Environmental Impact Statement for the Texas Oklahoma Passenger Rail Study Corridor...

Science.gov (United States)

2013-03-13

... transportation modes such as auto, air travel, intercity bus, and existing rail and the physical characteristics... alternatives to provide higher speed passenger rail service to meet future intercity travel demand and to... truck traffic demand, intercity truck traffic demand, and passenger travel demand compete for highway...

Complex Security System for Premises Under Conditions of Large Volume of Passenger Traffic

Directory of Open Access Journals (Sweden)

Yakubov Vladimir

2016-01-01

Full Text Available Subsystems of the design of a complex security system for premises under conditions of large volume of passenger traffic are considered. These subsystems provide video- and thermal imaging control, radio wave tomography, and gas analysis. Simultaneous application of all examined variants will essentially increase the probability of timely prevention of dangerous situations with the probability of false alarm as low as possible. It is important that finally, this will provide protection of population and will facilitate the work of intelligence services.

Projected Demand and Potential Impacts to the National Airspace System of Autonomous, Electric, On-Demand Small Aircraft

Science.gov (United States)

Smith, Jeremy C.; Viken, Jeffrey K.; Guerreiro, Nelson M.; Dollyhigh, Samuel M.; Fenbert, James W.; Hartman, Christopher L.; Kwa, Teck-Seng; Moore, Mark D.

2012-01-01

Electric propulsion and autonomy are technology frontiers that offer tremendous potential to achieve low operating costs for small-aircraft. Such technologies enable simple and safe to operate vehicles that could dramatically improve regional transportation accessibility and speed through point-to-point operations. This analysis develops an understanding of the potential traffic volume and National Airspace System (NAS) capacity for small on-demand aircraft operations. Future demand projections use the Transportation Systems Analysis Model (TSAM), a tool suite developed by NASA and the Transportation Laboratory of Virginia Polytechnic Institute. Demand projections from TSAM contain the mode of travel, number of trips and geographic distribution of trips. For this study, the mode of travel can be commercial aircraft, automobile and on-demand aircraft. NASA's Airspace Concept Evaluation System (ACES) is used to assess NAS impact. This simulation takes a schedule that includes all flights: commercial passenger and cargo; conventional General Aviation and on-demand small aircraft, and operates them in the simulated NAS. The results of this analysis projects very large trip numbers for an on-demand air transportation system competitive with automobiles in cost per passenger mile. The significance is this type of air transportation can enhance mobility for communities that currently lack access to commercial air transportation. Another significant finding is that the large numbers of operations can have an impact on the current NAS infrastructure used by commercial airlines and cargo operators, even if on-demand traffic does not use the 28 airports in the Continental U.S. designated as large hubs by the FAA. Some smaller airports will experience greater demand than their current capacity allows and will require upgrading. In addition, in future years as demand grows and vehicle performance improves other non-conventional facilities such as short runways incorporated into

How Important is the Integration of Public Passenger Transport

Directory of Open Access Journals (Sweden)

Mrníková Michaela

2017-11-01

Full Text Available The significance of the issue of an effective mode of passenger transport is currently increasing. On the one hand, there is the increasing economic demand of public passenger transport, on the other hand, there is the growing traffic share of individual automobile transport. The objective of the paper is to analyze public passenger transport without mutual integration of individual transport systems resulting in the fact that it is not sufficiently able to compete with individual automobile transport. It is proposed the integration of different modes of public passenger transport as a way to increase the competitiveness of public passenger transport. Aim of this paper is to analyze the individual elements of integration systems and describe why integration of public passenger transport systems is needed.

Passenger and Cell Phone Conversations in Simulated Driving

Science.gov (United States)

Drews, Frank A.; Pasupathi, Monisha; Strayer, David L.

2008-01-01

This study examines how conversing with passengers in a vehicle differs from conversing on a cell phone while driving. We compared how well drivers were able to deal with the demands of driving when conversing on a cell phone, conversing with a passenger, and when driving without any distraction. In the conversation conditions, participants were…

Modeling and Simulating Passenger Behavior for a Station Closure in a Rail Transit Network.

Directory of Open Access Journals (Sweden)

Haodong Yin

Full Text Available A station closure is an abnormal operational situation in which the entrances or exits of a rail transit station have to be closed for some time due to an unexpected incident. A novel approach is developed to estimate the impacts of the alternative station closure scenarios on both passenger behavioral choices at the individual level and passenger demand at the disaggregate level in a rail transit network. Therefore, the contributions of this study are two-fold: (1 A basic passenger behavior optimization model is mathematically constructed based on 0-1 integer programming to describe passengers' responses to alternative origin station closure scenarios and destination station closure scenarios; this model also considers the availability of multi-mode transportation and the uncertain duration of the station closure; (2 An integrated solution algorithm based on the passenger simulation is developed to solve the proposed model and to estimate the effects of a station closure on passenger demand in a rail transit network. Furthermore, 13 groups of numerical experiments based on the Beijing rail transit network are performed as case studies with 2,074,267 records of smart card data. The comparisons of the model outputs and the manual survey show that the accuracy of our proposed behavior optimization model is approximately 80%. The results also show that our model can be used to capture the passenger behavior and to quantitatively estimate the effects of alternative closure scenarios on passenger flow demand for the rail transit network. Moreover, the closure duration and its overestimation greatly influence the individual behavioral choices of the affected passengers and the passenger demand. Furthermore, if the rail transit operator can more accurately estimate the closure duration (namely, as g approaches 1, the impact of the closure can be somewhat mitigated.

Modeling and Simulating Passenger Behavior for a Station Closure in a Rail Transit Network.

Science.gov (United States)

Yin, Haodong; Han, Baoming; Li, Dewei; Wu, Jianjun; Sun, Huijun

2016-01-01

A station closure is an abnormal operational situation in which the entrances or exits of a rail transit station have to be closed for some time due to an unexpected incident. A novel approach is developed to estimate the impacts of the alternative station closure scenarios on both passenger behavioral choices at the individual level and passenger demand at the disaggregate level in a rail transit network. Therefore, the contributions of this study are two-fold: (1) A basic passenger behavior optimization model is mathematically constructed based on 0-1 integer programming to describe passengers' responses to alternative origin station closure scenarios and destination station closure scenarios; this model also considers the availability of multi-mode transportation and the uncertain duration of the station closure; (2) An integrated solution algorithm based on the passenger simulation is developed to solve the proposed model and to estimate the effects of a station closure on passenger demand in a rail transit network. Furthermore, 13 groups of numerical experiments based on the Beijing rail transit network are performed as case studies with 2,074,267 records of smart card data. The comparisons of the model outputs and the manual survey show that the accuracy of our proposed behavior optimization model is approximately 80%. The results also show that our model can be used to capture the passenger behavior and to quantitatively estimate the effects of alternative closure scenarios on passenger flow demand for the rail transit network. Moreover, the closure duration and its overestimation greatly influence the individual behavioral choices of the affected passengers and the passenger demand. Furthermore, if the rail transit operator can more accurately estimate the closure duration (namely, as g approaches 1), the impact of the closure can be somewhat mitigated.

Influence of the seasonal factor on the long-distance passenger correspondence

Directory of Open Access Journals (Sweden)

K. Dolia

2017-12-01

Full Text Available Up-today intercity passenger transportation is needed to consider fluctuations in demand for services over time. Designated fluctuations in demand mainly linked to the onset of a period of national or religious celebrations holidays, mass vacation in summer, internal and international sports and cultural activities, ect. Therefore, these demand irregularity of using public intercity transport should be considered when managing transportation. In issue to meet the needs of passengers moving within existing fluctuations in demand can decide to change the parameters of the components of the transport system. These changes include variety in amount or type of vehicles, schedules, changes in traffic patterns routes, introduction of these routes, limiting of the passenger’s purchasing ability fares and so on. It is important to determine the passenger’s place in the social, economic or cultural development of the population overemphasized. Therefore, regulation of activity of the public transport services must satisfy the possibility of these services within acceptable financial, time and physical burden for passengers. So, component optimization efficiency of intercity passengers’ transportation should take place in harmony with the social and economic development of society. The requirements set out not to satisfy the demand of passengers to move through extra large fare, lack of communication between bus transport areas with constant correspondence, failure to comply with increasing comfort haulage transport of tiredness or lack of means of transport are unacceptable phenomena. On the one hand the importance of the social dimension in long-distance traffic route of transport. In accordance with the meaning specified the need for balanced decision-making on the management system of passenger traffic. Invention compromise between technical and economic level to meet the demand and requirements of the conservation of expenditure

Modeling and Simulating Passenger Behavior for a Station Closure in a Rail Transit Network

Science.gov (United States)

Yin, Haodong; Han, Baoming; Li, Dewei; Wu, Jianjun; Sun, Huijun

2016-01-01

A station closure is an abnormal operational situation in which the entrances or exits of a rail transit station have to be closed for some time due to an unexpected incident. A novel approach is developed to estimate the impacts of the alternative station closure scenarios on both passenger behavioral choices at the individual level and passenger demand at the disaggregate level in a rail transit network. Therefore, the contributions of this study are two-fold: (1) A basic passenger behavior optimization model is mathematically constructed based on 0–1 integer programming to describe passengers’ responses to alternative origin station closure scenarios and destination station closure scenarios; this model also considers the availability of multi-mode transportation and the uncertain duration of the station closure; (2) An integrated solution algorithm based on the passenger simulation is developed to solve the proposed model and to estimate the effects of a station closure on passenger demand in a rail transit network. Furthermore, 13 groups of numerical experiments based on the Beijing rail transit network are performed as case studies with 2,074,267 records of smart card data. The comparisons of the model outputs and the manual survey show that the accuracy of our proposed behavior optimization model is approximately 80%. The results also show that our model can be used to capture the passenger behavior and to quantitatively estimate the effects of alternative closure scenarios on passenger flow demand for the rail transit network. Moreover, the closure duration and its overestimation greatly influence the individual behavioral choices of the affected passengers and the passenger demand. Furthermore, if the rail transit operator can more accurately estimate the closure duration (namely, as g approaches 1), the impact of the closure can be somewhat mitigated. PMID:27935963

A Passenger Travel Demand Model for Copenhagen

DEFF Research Database (Denmark)

Overgård, Christian Hansen; Jovicic, Goran

2003-01-01

The passenger travel model for Copenhagen is a state-of-practice nested logit model in which the sub-models - i.e. generation, distribution and mode choice models - are connected via measure of accessibility. The model includes in its structure a large set of explanatory variables at all three...... aims to provide a detailed description of the model, which can be used as a guide to the future development of similar models. Also, an application of the model in a study of road pricing in denmark is described. This gives the reader an idea of how such a policy measure can be modelled as well...

Passenger Perspectives in Railway Timetabling: A Literature Review

DEFF Research Database (Denmark)

Jensen, Jens Parbo; Nielsen, Otto Anker; Prato, Carlo Giacomo

2016-01-01

When looking at railway planning, a discrepancy exists between planners who focus on the train operations and publish fixed railway schedules, and passengers who look not only at the schedules but also at the entirety of their trip, from access to waiting to on-board travel and egress. Looking...... with fluctuating passenger demand. A key aspect is the robustness of railway timetables. Empirical evidence indicates that passengers give more importance to travel time certainty than travel time reductions, as passengers associate an inherent disutility with travel time uncertainty. This disutility may...... be broadly interpreted as an anxiety cost for the need for having contingency plans in case of disruptions, and may be looked at as the motivator for the need for delay-robust railway timetables. Interestingly, passenger-oriented optimisation studies considering robustness in railway planning typically limit...

Demand modelling of passenger air travel: An analysis and extension. Volume 1: Background and summary

Science.gov (United States)

Jacobson, I. D.

1978-01-01

The framework for a model of travel demand which will be useful in predicting the total market for air travel between two cities is discussed. Variables to be used in determining the need for air transportation where none currently exists and the effect of changes in system characteristics on attracting latent demand are identified. Existing models are examined in order to provide insight into their strong points and shortcomings. Much of the existing behavioral research in travel demand is incorporated to allow the inclusion of non-economic factors, such as convenience. The model developed is characterized as a market segmentation model. This is a consequence of the strengths of disaggregation and its natural evolution to a usable aggregate formulation. The need for this approach both pedagogically and mathematically is discussed.

Influence of diffusion of fuel-efficient motor vehicles on gasoline demand for individual user owned passenger cars

International Nuclear Information System (INIS)

Sakaguchi, Takahiro

2000-01-01

Trends in the demand for petrol in Japan for cars owned by individuals are discussed with reference to expected improvements in fuel efficiency for new models and the results of a survey of user preferences for fuel-efficient vehicles. Demand for petrol in Japan has continued to increase in line with the number of cars used by individual owners. A questionnaire on motor vehicles sent to households found that, while cost and body style were the primary factors in car purchase, three-quarters of respondents would consider buying a low fuel consumption (LFC) version of the model chosen. The influence of LFC vehicles on future demand for petrol was estimated for up to 2015 by combining market timing with consumer preferences. Comparison of the estimated petrol consumption by LFC cars with the Government's requirement for reduced energy use by the transport sector in order to meet its climate change targets indicated a shortfall and a need to increase consumer demand for LFC vehicles. Government measures to reduce energy use in the transport sector, fuel efficiency targets for 2010, major LFC cars, fuel efficiency improvements by major Japanese motor manufacturers and scenarios for assessing the influence of LFC cars are summarised in five tables. Trends in petrol consumption and estimated use by individual user owned passenger cars are shown graphically

Occupant Volume Integrity Evaluation in Passenger Rail Cars

Science.gov (United States)

2012-02-01

This research, which is intended to enable the growth of high-speed and intercity passenger rail transportation, was sponsored by the Federal Railroad Administration (FRA) Office of Research and Development, as part of the train Occupant Protection r...

Research on Demand for Bus Transport and Transport Habits of High School Students in Žilina Region

Directory of Open Access Journals (Sweden)

Konečný Vladimír

2017-11-01

Full Text Available The paper deals with the analysis of demand for bus transport to examine determinants of demand and practices of high school students based on survey of their transport habits in Žilina Region. Transport habits of students are individual and variable in time. This group of passengers is dependent on public passenger transport services because of their travelling to schools. Significant part of demand for public passenger transport is also formed by this this group of passengers. The knowledge of student's transport habits may help in process of adaptation of offering and quality of transport serviceability what may subsequently stabilize demand for public passenger transport.

Fundamental Travel Demand Model Example

Science.gov (United States)

Hanssen, Joel

2010-01-01

Instances of transportation models are abundant and detailed "how to" instruction is available in the form of transportation software help documentation. The purpose of this paper is to look at the fundamental inputs required to build a transportation model by developing an example passenger travel demand model. The example model reduces the scale to a manageable size for the purpose of illustrating the data collection and analysis required before the first step of the model begins. This aspect of the model development would not reasonably be discussed in software help documentation (it is assumed the model developer comes prepared). Recommendations are derived from the example passenger travel demand model to suggest future work regarding the data collection and analysis required for a freight travel demand model.

Open-source Software for Demand Forecasting of Clinical Laboratory Test Volumes Using Time-series Analysis.

Science.gov (United States)

Mohammed, Emad A; Naugler, Christopher

2017-01-01

Demand forecasting is the area of predictive analytics devoted to predicting future volumes of services or consumables. Fair understanding and estimation of how demand will vary facilitates the optimal utilization of resources. In a medical laboratory, accurate forecasting of future demand, that is, test volumes, can increase efficiency and facilitate long-term laboratory planning. Importantly, in an era of utilization management initiatives, accurately predicted volumes compared to the realized test volumes can form a precise way to evaluate utilization management initiatives. Laboratory test volumes are often highly amenable to forecasting by time-series models; however, the statistical software needed to do this is generally either expensive or highly technical. In this paper, we describe an open-source web-based software tool for time-series forecasting and explain how to use it as a demand forecasting tool in clinical laboratories to estimate test volumes. This tool has three different models, that is, Holt-Winters multiplicative, Holt-Winters additive, and simple linear regression. Moreover, these models are ranked and the best one is highlighted. This tool will allow anyone with historic test volume data to model future demand.

Open-source software for demand forecasting of clinical laboratory test volumes using time-series analysis

Directory of Open Access Journals (Sweden)

Emad A Mohammed

2017-01-01

Full Text Available Background: Demand forecasting is the area of predictive analytics devoted to predicting future volumes of services or consumables. Fair understanding and estimation of how demand will vary facilitates the optimal utilization of resources. In a medical laboratory, accurate forecasting of future demand, that is, test volumes, can increase efficiency and facilitate long-term laboratory planning. Importantly, in an era of utilization management initiatives, accurately predicted volumes compared to the realized test volumes can form a precise way to evaluate utilization management initiatives. Laboratory test volumes are often highly amenable to forecasting by time-series models; however, the statistical software needed to do this is generally either expensive or highly technical. Method: In this paper, we describe an open-source web-based software tool for time-series forecasting and explain how to use it as a demand forecasting tool in clinical laboratories to estimate test volumes. Results: This tool has three different models, that is, Holt-Winters multiplicative, Holt-Winters additive, and simple linear regression. Moreover, these models are ranked and the best one is highlighted. Conclusion: This tool will allow anyone with historic test volume data to model future demand.

Estimating passenger numbers in trains using existing weighing capabilities

DEFF Research Database (Denmark)

Nielsen, Bo Friis; Frølich, Laura; Nielsen, Otto Anker

2013-01-01

trains to control braking. This technique makes passenger counting cheaper and ensures a complete sample. The paper compares numbers estimated by this technique with manual counts and counts from an infrared system in trains in urban Copenhagen. It shows that the weighing system provides more accurate......Knowing passenger numbers is important for the planning and operation of the urban rail systems. Manual and electronic counting systems (typically infrared or video) are expensive and therefore entail small sample sizes. They usually count boarding and alighting passengers, which means that errors...... in estimates of total numbers of passengers propagate along train runs. Counting errors in manual and electronic counting systems are typically flow-dependent, making uncertainty a function of volume. This paper presents a new counting technique that exploits the weighing systems installed in most modern...

Research on Multi-leg Inventory Control Based on Passenger Choice

OpenAIRE

Fan, Wei; Su, Qiubo; Ip, Wai Hung

2014-01-01

To remedy the lack of mathematical programming and the Expected Marginal Seat Revenue (EMSR) model for multi-leg seat inventory control, this paper proposes a method based on passenger choice. Except for data about which seats passengers decide to opt for, there is no need to obtain distributions of passengers’ demands or other “a priori” information. The proposed method can discover the real factors that affect passengers’ choices, and then estimate the probabilities of seat choices and the ...

Alighting and Boarding Time Model of Passengers at a LRT Station in Kuala Lumpur

Directory of Open Access Journals (Sweden)

Hor Peay San

2017-01-01

Full Text Available A research was conducted to study the factors affecting the alighting and boarding rate of passengers and establish a prediction model for alighting and boarding time of passengers for a passenger rail service in Malaysia. Data was collected at the KL Sentral LRT station during the morning and evening peak hours for a period of 5 working days. Results show that passenger behaviour, passenger volume, crowdedness in train and mixture of flow has significant effects on the alighting and boarding time though mixture of flow is not significant in the prediction model produced due to the passenger behaviour at the platform.

ISSUES OF ORGANIZING THE PASSENGER TRANSPORTATION ON US RAILWAYS

Directory of Open Access Journals (Sweden)

R. H. Korobiova

2017-04-01

Full Text Available Purpose. The paper focuses on a study of the US railway transport organization management during passenger transportation. Methodology. Studies were carried out on the basis of the analysis of literature sources and reporting data on passenger transportation in the USA. Findings. Negative trends in the work of the passenger complex of the Ukrainian railways are the slowdown in the volumes of transportation, the progressive aging of the rolling stock and the overall activity running at a loss for Ukrzaliznytsia. In this regard, the actual task for domestic rail transport is the implementation of industry reforms. Therefore, the paper presented the study of the experience of organizing the passenger transportation on US railways, whose peculiarity is the extremely high degree of competition between modes of transport. As a result of the conducted analysis for working conditions of the US and Ukrainian railways, the general conditions for the functioning of the railways in both countries connected with passenger transportation securing have been established. It was found that general condition for execution of railway passenger transportation for the United States and Ukraine is the subsidization of this activity and combined use of infrastructure for the freight and passengers’ transportations. In this connection, when developing approaches to reforming the passenger economy of Ukraine's railways, it is advisable to use the experience of the United States in assessing the social effectiveness of rail transport, the impact of passenger transportation on the conditions of freight trains handling, and combined use of railway infrastructure by freight and passenger companies. Originality. The author determined the general trends in the development of passenger railway transportation in the US and Ukraine. Practical value. The resulted methods of organizing the operation of the US railway passenger transportation complex can be adapted to solve

Energy study of rail passenger transportation. Volume 2. Description of operating systems. Final report

Energy Technology Data Exchange (ETDEWEB)

Henderson, C.; Ellis, H. T.; Wilhelm, J. P.

1979-08-01

The rail passenger systems of the US are described in terms of selected physical, operating, and economic characteristics, and relates services rendered to energy usage and costs. Rail passenger transportation exists in 4 distinct forms: intercity railroads, suburban railroads, heavy-rail transit, and light-rail transit. Each form varies in technical equipment, design of facilities, operating practices, size of systems. Specific data for the national rail passenger network and the Boston, Chicago, Cleveland, New York, Philadelphia, Pittsburgh, and San Francisco regions and the Washington Metropolitan area transit authority are presented.

"Good Passengers and Not Good Passengers:" Adolescent Drivers' Perceptions About Inattention and Peer Passengers.

Science.gov (United States)

McDonald, Catherine C; Sommers, Marilyn S

The purpose of this qualitative focus group elicitation research study was to explore teen driver perceptions of peer passengers and driver inattention. We utilized focus groups for data collection and content analysis to analyze the data, both of which were guided by the theory of planned behavior. We conducted 7 focus groups with 30 teens, ages 16-18, licensed for ≤1year to examine attitudes, perceived behavioral control, and norms related to driving inattention and peer passengers. The sample was 50% male, mean age 17.39 (SD 0.52) with mean length of licensure 173.7days (SD 109.2). Three themes emerged: 1) "Good and not good" passengers; 2) Passengers and technology as harmful and helpful; and 3) The driver is in charge. While passengers can be a source of distraction, our participants also identified passenger behaviors that reduced risk, such as assistance with technology and guidance for directions. An understanding of teens' perceptions of peer passengers can contribute to the development of effective interventions targeting teen driver inattention. Nurses are well-positioned to contribute to these teen crash prevention efforts. Copyright © 2016 Elsevier Inc. All rights reserved.

Future Parking Demand at Rail Stations in Klang Valley

Directory of Open Access Journals (Sweden)

Ho Phooi Wai

2017-01-01

Full Text Available Klang Valley, Malaysia is currently undergoing a massive development of rail transportation system expansion where the current integrated rail transit system will see new extensions of two MRT lines and an LRT line by year 2020. By year 2017, the first MRT line will be ready to run with 31 new rail stations connected to the current passenger rail network. The existing Park and Ride facilities in Klang Valley are commonly known as being unable to sufficiently cater for the current parking space demand. Therefore, with the expansion of many additional rail stations which are rapidly under construction, there are doubts that the future parking space at rail stations will be able to accommodate the sudden rise of rail passengers. Although the authorities are increasing parking bays at various locations, will the future parking demand at rail stations be sufficient? This paper studies the factors influencing parking demand in terms of population, car ownership, new car registrations and passenger rail ridership and estimating the future parking demand using Linear Regression method. Result shows that the forecasted parking demand at rail stations after the implementation of the first new MRT system in 2017 is 2.7 times more than in 2014.

Convenient Airports: Point of View of the Passengers

Science.gov (United States)

Magri, Adival Aparecido, Jr.; Alves, Claudio Jorge Pinto

2003-01-01

The competition among airlines or among airports aiming at to increase the demand for its services has been more and more incited. Knowledge the perception of the users for the offered services means to meet the customer's needs and expectations in order either to keep the customer, and therefore keep a significant advantage over competitors. The passenger of the air transportation wants rapidity, security and convenience. Convenience can be translated by comfort that the passenger wants for the price that he can pay. In this paper had been identified. as a result of a survey achieved in six Brazilian airports during 2002, the best indicators in the passenger's perception. These indicators among any others were listed m the handbook of Airports Council International (ACI). Distinctive perceptions were observed among passengers with different travel motivations. This survey had been carried through in the airports of Brasilia, Porto Alegre, Salvador. Fortaleza, Curitiba and Bel6m. Considering this survey we can identified the most attractive airport among them. This work is a way to help improve quality of service, in particular, m these six airports of the Brazilian network. The results should be published and made available to all the parties concerned (airport authority, airlines and service providers) and should lead to corrective action when the passenger is not satisfied with the service.

150 Passenger Commercial Aircraft

Science.gov (United States)

Bucovsky, Adrian; Romli, Fairuz I.; Rupp, Jessica

2002-01-01

It has been projected that the need for a short-range mid-sized, aircraft is increasing. The future strategy to decrease long-haul flights will increase the demand for short-haul flights. Since passengers prefer to meet their destinations quickly, airlines will increase the frequency of flights, which will reduce the passenger load on the aircraft. If a point-to-point flight is not possible, passengers will prefer only a one-stop short connecting flight to their final destination. A 150-passenger aircraft is an ideal vehicle for these situations. It is mid-sized aircraft and has a range of 3000 nautical miles. This type of aircraft would market U.S. domestic flights or inter-European flight routes. The objective of the design of the 150-passenger aircraft is to minimize fuel consumption. The configuration of the aircraft must be optimized. This aircraft must meet CO2 and NOx emissions standards with minimal acquisition price and operating costs. This report contains all the work that has been performed for the completion of the design of a 150 passenger commercial aircraft. The methodology used is the Technology Identification, Evaluation, and Selection (TIES) developed at Georgia Tech Aerospace Systems Design laboratory (ASDL). This is an eight-step conceptual design process to evaluate the probability of meeting the design constraints. This methodology also allows for the evaluation of new technologies to be implemented into the design. The TIES process begins with defining the problem with a need established and a market targeted. With the customer requirements set and the target values established, a baseline concept is created. Next, the design space is explored to determine the feasibility and viability of the baseline aircraft configuration. If the design is neither feasible nor viable, new technologies can be implemented to open up the feasible design space and allow for a plausible solution. After the new technologies are identified, they must be evaluated

“Good passengers and not good passengers:” Adolescent drivers’ perceptions about inattention and peer passengers

Science.gov (United States)

Sommers, Marilyn S.

2016-01-01

Purpose The purpose of this qualitative focus group elicitation research study was to explore teen driver perceptions of peer passengers and driver inattention. Design & Methods We utilized focus groups for data collection and content analysis to analyze the data, both of which were guided by the Theory of Planned Behavior. We conducted 7 focus groups with 30 teens, ages 16–18, licensed for ≤1 year to examine attitudes, perceived behavioral control, and norms related to driving inattention and peer passengers. Results The sample was 50% male, mean age 17.39 (sd 0.52) with mean length of licensure 173.7 days (sd 109.2). Three themes emerged: 1) “Good and not good” passengers; 2) Passengers and technology as harmful and helpful; and 3) The driver is in charge. Conclusions While passengers can be a source of distraction, our participants also identified passenger behaviors that reduced risk, such as assistance with technology and guidance for directions. Practical Implications An understanding of teens’ perceptions of peer passengers can contribute to the development of effective interventions targeting teen driver inattention. Nurses are well-positioned to contribute to these teen crash prevention efforts. PMID:27496828

The influence of passenger flow on the topology characteristics of urban rail transit networks

Science.gov (United States)

Hu, Yingyue; Chen, Feng; Chen, Peiwen; Tan, Yurong

2017-05-01

Current researches on the network characteristics of metro networks are generally carried out on topology networks without passenger flows running on it, thus more complex features of the networks with ridership loaded on it cannot be captured. In this study, we incorporated the load of metro networks, passenger volume, into the exploration of network features. Thus, the network can be examined in the context of operation, which is the ultimate purpose of the existence of a metro network. To this end, section load was selected as an edge weight to demonstrate the influence of ridership on the network, and a weighted calculation method for complex network indicators and robustness were proposed to capture the unique behaviors of a metro network with passengers flowing in it. The proposed method was applied on Beijing Subway. Firstly, the passenger volume in terms of daily origin and destination matrix was extracted from exhausted transit smart card data. Using the established approach and the matrix as weighting, common indicators of complex network including clustering coefficient, betweenness and degree were calculated, and network robustness were evaluated under potential attacks. The results were further compared to that of unweighted networks, and it suggests indicators of the network with consideration of passenger volumes differ from that without ridership to some extent, and networks tend to be more vulnerable than that without load on it. The significance sequence for the stations can be changed. By introducing passenger flow weighting, actual operation status of the network can be reflected more accurately. It is beneficial to determine the crucial stations and make precautionary measures for the entire network’s operation security.

FORECASTING OF PASSENGER TRAFFIC UPON IMPLEMENTATION OF HIGH-SPEED RUNNING

Directory of Open Access Journals (Sweden)

M. B. Kurhan

2017-02-01

Full Text Available Purpose. Forecasting of passenger traffic flows in the future is an essential and integral part of the complex process of designing of high-speed network (HSN. HSN direction and its parameters are determined by the volume of passenger traffic, the estimated value of which depends on the economic performance of the country, as well as the material status of citizens living in HSN concentration area, transport mobility of population, development of competing modes of transport and so on. The purpose of this work is to analyse the existing methods of passenger traffic forecasting, to evaluate errors of the existing models concerning determination of traffic volumes and to specify the scientific approach to the development of high-speed rail transport in Ukraine. Methodology. The existing forecasting methods are reduced to the following ones: Delphi approach, extrapolation method, factor and correlation analysis, simulation method. The method described in this paper is based on scientific approaches such as analysis – a comprehensive and detailed study of various aspects of the known forecasting methods, comparing of existing methods for establishing differences and similarities, as well as deduction – use of general knowledge to get the new particular one. Thus, the unified indicators determined for the country as a whole, such as gross domestic product, national income, total population and others cannot be used to forecast the traffic flow on specific areas of HSN construction. Therefore, it is necessary to move from the overall forecast to traffic volume forecast on particular direction. Findings. The conclusions are derived from the analysis of different approaches and methods of passenger flow forecasting. It is proposed to create typical techniques of traffic flow forecasting using modern mathematical methods that would allow avoiding unreasonable decisions and shortening project development time. The resulting recommendations will help

Rationalization of Public Road Passenger Transport by Merging Bus Lines on the Example of Zadar County

Directory of Open Access Journals (Sweden)

Goran Kos

2012-07-01

Full Text Available This study consists of the analysis of public passenger transport in Zadar County, that is, transport on the County and school lines and suggestions of transport rationalization. The rationalization comprises the application of the County and school lines integration, as well as suggestions of other measures which aim to reduce transport costs financed by Zadar County. The objectives to rationalize public passenger transport have been defined, all County transport lines of schoolchildren and other passengers have been analysed as well as actual deficiencies in the city, County and school transport needs. Road transport infrastructure, carriers and transportation vehicles have been analysed. The future transport demand has been reviewed and the prediction of passengers on lines has been provided. Within the next five to ten years no relevant changes will take place, meaning that the balance in transport supply and demand will not be disrupted significantly. This study presents the measures for transport cost reduction and increase in the safety level in the performance of public transport.

Passenger Vessel Damage Stability Study for 1990 SOLAS Amendments. Volume 2. Appendix B

Science.gov (United States)

1994-09-01

0.1 Note: Drafts are measured at A.P. and F.P alang ship’s centertine GE SUMMARY (Bvaluated per IKO (SOLAB󈨞) Rules for Passenger Ships) Available...Drafts are measured at A.P. and F.P alang ship’s centertine 03 SUNMIRY (Nvaluated per liO (8OLA1󈨞) Rules for Passenger Ships) Available Required...156.0 ------------------------------------ i- ------------ Note: Drafts are mesured at A.P. and F.P alang ship’s center ,Irw GZ SUMMARY (2valuateG per

Local fluctuations of the signed traded volumes and the dependencies of demands: a copula analysis

Science.gov (United States)

Wang, Shanshan; Guhr, Thomas

2018-03-01

We investigate how the local fluctuations of the signed traded volumes affect the dependence of demands between stocks. We analyze the empirical dependence of demands using copulas and show that they are well described by a bivariate K copula density function. We find that large local fluctuations strongly increase the positive dependence but lower slightly the negative one in the copula density. This interesting feature is due to cross-correlations of volume imbalances between stocks. Also, we explore the asymmetries of tail dependencies of the copula density, which are moderate for the negative dependencies but strong for the positive ones. For the latter, we reveal that large local fluctuations of the signed traded volumes trigger stronger dependencies of demands than of supplies, probably indicating a bull market with persistent raising of prices.

A reliable and consistent production technology for high volume compacted graphite iron castings

Directory of Open Access Journals (Sweden)

Liu Jincheng

2014-07-01

Full Text Available The demands for improved engine performance, fuel economy, durability, and lower emissions provide a continual challenge for engine designers. The use of Compacted Graphite Iron (CGI has been established for successful high volume series production in the passenger vehicle, commercial vehicle and industrial power sectors over the last decade. The increased demand for CGI engine components provides new opportunities for the cast iron foundry industry to establish efficient and robust CGI volume production processes, in China and globally. The production window range for stable CGI is narrow and constantly moving. Therefore, any one step single addition of magnesium alloy and the inoculant cannot ensure a reliable and consistent production process for complicated CGI engine castings. The present paper introduces the SinterCast thermal analysis process control system that provides for the consistent production of CGI with low nodularity and reduced porosity, without risking the formation of flake graphite. The technology is currently being used in high volume Chinese foundry production. The Chinese foundry industry can develop complicated high demand CGI engine castings with the proper process control technology.

Research on strategy and optimization method of PRT empty vehicles resource allocation based on traffic demand forecast

Science.gov (United States)

Xiang, Yu; Tao, Cheng

2018-05-01

During the operation of the personal rapid transit system(PRT), the empty vehicle resources is distributed unevenly because of different passenger demand. In order to maintain the balance between supply and demand, and to meet the passenger needs of the ride, PRT empty vehicle resource allocation model is constructed based on the future demand forecasted by historical demand in this paper. The improved genetic algorithm is implied in distribution of the empty vehicle which can reduce the customers waiting time and improve the operation efficiency of the PRT system so that all passengers can take the PRT vehicles in the shortest time. The experimental result shows that the improved genetic algorithm can allocate the empty vehicle from the system level optimally, and realize the distribution of the empty vehicle resources reasonably in the system.

Rail passengers rights

Directory of Open Access Journals (Sweden)

Đurđev Dušanka J.

2016-01-01

Full Text Available The legal framework of rail passengers rights is set out in a combination of international and European law: an international measure, the rather unwieldy Uniform Rules concerning the Contract for International Carriage of Passengers and Luggage by Rail, forming part of the Convention concerning International Carriage by Rail of 9 May 1980 (as amended by the Vilnius Protocol of 3 June 1999 ['CIV'], lays down a basic framework which is then fleshed out by more recent EU legislation, Regulation (EC No 1371/2007 on Rail Passengers ' Rights and Obligations. Regulation 1371/2007/EC on rail passenger rights and obligations sets out minimum quality standards that have to be guaranteed to all passengers on all lines. .

NPS Transit System Passenger Boardings Study: Converting Ticket Sales to Passenger Boardings.

Science.gov (United States)

2016-01-01

This report examines the reporting of passenger boardings (unlinked passenger trips) by NPS transit systems that use a ticket sales conversion methodology. By studying and validating the park units' passenger boarding methodology from converting tick...

Simulating the impact of policy, energy prices and technological progress on the passenger car fleet in Austria-A model based analysis 2010-2050

International Nuclear Information System (INIS)

Kloess, Maximilian; Mueller, Andreas

2011-01-01

This paper investigates the effects of policy, fuel prices and technological progress on the Austrian passenger car fleet in terms of energy consumption and greenhouse gas (GHG) emissions. To analyse these effects a simulation model is used. We model the car fleet from a bottom-up perspective, with a detailed coverage of vehicle specifications and propulsion technologies. The model focuses on the technological trend toward electrified propulsion systems and their potential effects on the fleet's energy consumption and GHG emissions. To represent the impact of prices and income on the development of the fleet, we combine the fleet model with top-down demand models. We developed two scenarios for the time frame 2010-2050, using two different sets of assumptions for regulatory development and conditions of increasing fossil fuel prices and continuous technological progress in vehicle propulsion technologies. The results indicate that material cuts in energy consumption and GHG emissions can be achieved with changes to the political framework for passenger cars. Appropriate taxation of fuels and cars can stabilise demand for individual motorised transport and lead to an improvement in vehicle efficiency by fostering the adoption of efficient vehicle propulsion technologies and low carbon fuels. - Highlights: → We present a simulation model for future energy demand and greenhouse gas emissions in passenger car transport. → We develop scenarios up to 2050 assuming two different policy schemes. → Policy strongly affects energy demand and greenhouse gas emissions in passenger car transport. → Policy can slow down growth in demand for passenger car transport. → Policy can promote the diffusion of more efficient propulsion technologies and low carbon fuels.

Energy demand: Facts and trends

Energy Technology Data Exchange (ETDEWEB)

Chateau, B; Lapillonne, B

1982-01-01

The relationship between economic development and energy demand is investigated in this book. It gives a detailed analysis of the energy demand dynamics in industrialized countries and compares the past evolution of the driving factors behind energy demand by sector and by end-uses for the main OECD countries: residential sector (space heating, water heating, cooking...), tertiary sector, passenger and goods transport by mode, and industry (with particular emphasis on the steel and cement industry). This analysis leads to a more precise understanding of the long-term trends of energy demand; highlighting the influence on these trends of energy prices, especially after the oil price shocks, and of the type of economic development pattern.

Cost characteristics of tilt-rotor, conventional air and high speed rail short-haul intercity passenger service

Science.gov (United States)

Schoendorfer, David L.; Morlok, Edward K.

1985-01-01

The cost analysis done to support an assessment of the potential for a small tilt-rotor aircraft to operate in short-haul intercity passenger service is described in detail. Anticipated costs of tilt-rotor air service were compared to the costs of two alternatives: conventional air and high speed rail (HSR). Costs were developed for corridor service, varying key market characteristics including distance, passenger volumes, and minimum frequency standards. The resulting cost vs output information can then be used to compare modal costs for essentially identical service quality and passenger volume or for different service levels and volumes for each mode, as appropriate. Extensive sensitivity analyses are performed. The cost-output features of these technologies are compared. Tilt-rotor is very attractive compared to HSR in terms of costs over the entire range of volume. It also has costs not dramatically different from conventional air, but tilt-rotor costs are generally higher. Thus some of its other advantages, such as the VTOL capability, must offset the cost disadvantage for it to be a preferred or competitive mode in any given market. These issues are addressed in the companion report which considers strategies for tilt-rotor development in commercial air service.

the determinants of demand for public transport services in kumasi

African Journals Online (AJOL)

dmosman.admin

The objective of the study was to establish the major factors influencing demand as well as de- velop a demand model for urban passenger transport services in Kumasi, Ghana. ... Cities in developing countries often spend be- ... the total urban road network was in “Good” ... several other functions of a national, regional.

Optimization of a passenger railway transportation plan considering mobility flows and service quality

NARCIS (Netherlands)

Brethome, L.; Bouvet-Agnelli, C.; Chevrier, R.; van Oort, N.; Rodriguez, J

2017-01-01

This research focuses on designing transportation plan for SNCF Transilien (French rail-way operator for the Parisian suburban mass transit). The objective is to develop methods and decision support tools to propose a timetable adapted to the passenger demand in the Parisian mass transit system,

Modelling the Dynamic Impacts of High Speed Rail Operation on Regional Public Transport—From the Perspective of Energy Economy

Directory of Open Access Journals (Sweden)

Ching-Chih Chou

2018-05-01

Full Text Available While the introduction of a high speed rail (HSR provides passengers with another more environmentally friendly, convenient, and time-saving transport option, it also disrupts the existing passenger transport market. This study adopts time series analysis to model the dynamic competition in a regional passenger transport market when an HSR is introduced. The analyses include examining the long-run equilibrium and causal relationships, and the short-run causality and dynamic relationships between transport modes. In addition, based on the model we conduct impulse response tests and variance decomposition tests to further interpret the interactions between two transport modes. An empirical study is carried out, and the findings indicate that the HSR has a negative impact on conventional rail and air transport in the long-run. In the short-run dynamics, the air passenger transport volume could be regarded as a good predictor of HSR passenger volume. In turn, the HSR passenger volume could be used to predict conventional rail transport volume. The operations of HSR and conventional rail are complementary in the short term. From the short-run market viewpoint, the HSR and conventional rail meet different kinds of passenger demand. Therefore, a previous increased passenger volume for the HSR implies an overall increasing demand for regional transport. Consequently, the past increased HSR passenger volume could be used to predict the growth of conventional rail transport. Through the impulse response test, we can further track the responses of the three transport modes to the shocks from themselves and each other.

Modeling and Optimization of Collaborative Passenger Control in Urban Rail Stations under Mass Passenger Flow

Directory of Open Access Journals (Sweden)

Lili Wang

2015-01-01

Full Text Available With the rapid development of urban rail transit, the phenomenon of outburst passenger flows flocking to stations is occurring much more frequently. Passenger flow control is one of the main methods used to ensure passengers’ safety. While most previous studies have only focused on control measures inside the target station, ignoring the collaboration between stops, this paper puts emphasis on joint passenger control methods during the occurrence of large passenger flows. To provide a theoretic description for the problem under consideration, an integer programming model is built, based on the analysis of passenger delay and the processes by which passengers alight and board. Taking average passenger delay as the objective, the proposed model aims to disperse the pressure of oversaturated stations into others, achieving the optimal state for the entire line. The model is verified using a case study and the results show that restricted access measures taken collaboratively by stations produce less delay and faster evacuation. Finally, a sensitivity analysis is conducted, from which we find that the departure interval and maximum conveying capacity of the train affect passenger delay markedly in the process of passenger control and infer that control measures should be taken at stations near to the one experiencing an emergency.

Industrial Sector Technology Use Model (ISTUM): industrial energy use in the United States, 1974-2000. Volume 3. Appendix on service and fuel demands. Final report

Energy Technology Data Exchange (ETDEWEB)

1979-10-01

This book is the third volume of the ISTUM report. The first volume of the report describes the primary model logic and the model's data inputs. The second volume lists and evaluates the results of one model run. This and the fourth volume give supplementary information in two sets of model data - the energy consumption base and technology descriptions. Chapter III of Vol. I, Book 1 describes the ISTUM demand base and explains how that demand base was developed. This volume serves as a set of appendices to that chapter. The chapter on demands in Vol. I describes the assumptions and methodology used in constructing the ISTUM demand base; this volume simply lists tables of data from that demand base. This book divides the demand tables into two appendices. Appendix III-1 contains detailed tables on ISTUM fuel-consumption estimates, service-demand forecasts, and size and load-factor distributions. Appendix III-2 contains tables detailing ISTUM allocations of each industry's fuel consumption to service sectors. The tables show how the ECDB was used to develop the ISTUM demand base.

Transport energy demand modeling of South Korea using artificial neural network

International Nuclear Information System (INIS)

Geem, Zong Woo

2011-01-01

Artificial neural network models were developed to forecast South Korea's transport energy demand. Various independent variables, such as GDP, population, oil price, number of vehicle registrations, and passenger transport amount, were considered and several good models (Model 1 with GDP, population, and passenger transport amount; Model 2 with GDP, number of vehicle registrations, and passenger transport amount; and Model 3 with oil price, number of vehicle registrations, and passenger transport amount) were selected by comparing with multiple linear regression models. Although certain regression models obtained better R-squared values than neural network models, this does not guarantee the fact that the former is better than the latter because root mean squared errors of the former were much inferior to those of the latter. Also, certain regression model had structural weakness based on P-value. Instead, neural network models produced more robust results. Forecasted results using the neural network models show that South Korea will consume around 37 MTOE of transport energy in 2025. - Highlights: → Transport energy demand of South Korea was forecasted using artificial neural network. → Various variables (GDP, population, oil price, number of registrations, etc.) were considered. → Results of artificial neural network were compared with those of multiple linear regression.

Improving car passengers' comfort and experience by supporting the use of handheld devices

NARCIS (Netherlands)

Veen, S.A.T. van; Hiemstra-van Mastrigt, S.; Kamp, I.; Vink, P.

2014-01-01

Background: There is a demand for interiors to support other activities in a car than controlling the vehicle. Currently, this is the case for the car passengers and-in the future-autonomous driving cars will also facilitate drivers to perform other activities. One of these activities is working

Effect of fare and travel time on the demand for domestic air transportation

Science.gov (United States)

Eriksen, S. E.; Liu, E. W.

1979-01-01

An econometric travel demand model was presented. The model was used for analyzing long haul domestic passenger markets in the United States. The results showed the sensitivities of demand to changes in fares and speed reflecting technology through more efficient aircraft designs.

Improving car passengers' comfort and experience by supporting the use of handheld devices

NARCIS (Netherlands)

Van Veen, S.A.T.; Van Mastrigt, S.; Kamp, I.; Vink, P.

2014-01-01

BACKGROUND: There is a demand for interiors to support other activities in a car than controlling the vehicle. Currently, this is the case for the car passengers and – in the future – autonomous driving cars will also facilitate drivers to perform other activities. One of these activities is working

Analysis of bus passenger comfort perception based on passenger load factor and in-vehicle time.

Science.gov (United States)

Shen, Xianghao; Feng, Shumin; Li, Zhenning; Hu, Baoyu

2016-01-01

Although bus comfort is a crucial indicator of service quality, existing studies tend to focus on passenger load and ignore in-vehicle time, which can also affect passengers' comfort perception. Therefore, by conducting surveys, this study examines passengers' comfort perception while accounting for both factors. Then, using the survey data, it performs a two-way analysis of variance and shows that both in-vehicle time and passenger load significantly affect passenger comfort. Then, a bus comfort model is proposed to evaluate comfort level, followed by a sensitivity analysis. The method introduced in this study has theoretical implications for bus operators attempting to improve bus service quality.

Intermodal Passenger Connectivity Database -

Data.gov (United States)

Department of Transportation — The Intermodal Passenger Connectivity Database (IPCD) is a nationwide data table of passenger transportation terminals, with data on the availability of connections...

The modeling of attraction characteristics regarding passenger flow in urban rail transit network based on field theory.

Science.gov (United States)

Li, Man; Wang, Yanhui; Jia, Limin

2017-01-01

Aimed at the complicated problems of attraction characteristics regarding passenger flow in urban rail transit network, the concept of the gravity field of passenger flow is proposed in this paper. We establish the computation methods of field strength and potential energy to reveal the potential attraction relationship among stations from the perspective of the collection and distribution of passenger flow and the topology of network. As for the computation methods of field strength, an optimum path concept is proposed to define betweenness centrality parameter. Regarding the computation of potential energy, Compound Simpson's Rule Formula is applied to get a solution to the function. Taking No. 10 Beijing Subway as a practical example, an analysis of simulation and verification is conducted, and the results shows in the following ways. Firstly, the bigger field strength value between two stations is, the stronger passenger flow attraction is, and the greater probability of the formation of the largest passenger flow of section is. Secondly, there is the greatest passenger flow volume and circulation capacity between two zones of high potential energy.

The modeling of attraction characteristics regarding passenger flow in urban rail transit network based on field theory.

Directory of Open Access Journals (Sweden)

Man Li

Full Text Available Aimed at the complicated problems of attraction characteristics regarding passenger flow in urban rail transit network, the concept of the gravity field of passenger flow is proposed in this paper. We establish the computation methods of field strength and potential energy to reveal the potential attraction relationship among stations from the perspective of the collection and distribution of passenger flow and the topology of network. As for the computation methods of field strength, an optimum path concept is proposed to define betweenness centrality parameter. Regarding the computation of potential energy, Compound Simpson's Rule Formula is applied to get a solution to the function. Taking No. 10 Beijing Subway as a practical example, an analysis of simulation and verification is conducted, and the results shows in the following ways. Firstly, the bigger field strength value between two stations is, the stronger passenger flow attraction is, and the greater probability of the formation of the largest passenger flow of section is. Secondly, there is the greatest passenger flow volume and circulation capacity between two zones of high potential energy.

14 CFR 91.517 - Passenger information.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 2 2010-01-01 2010-01-01 false Passenger information. 91.517 Section 91... Multiengine Airplanes and Fractional Ownership Program Aircraft § 91.517 Passenger information. (a) Except as... belts and when smoking is prohibited. (c) If passenger information signs are installed, no passenger or...

75 FR 26839 - Metrics and Standards for Intercity Passenger Rail Service under Section 207 of the Passenger...

Science.gov (United States)

2010-05-12

... and Standards for Intercity Passenger Rail Service under Section 207 of the Passenger Rail Investment... performance and service quality of intercity passenger train operations. In compliance with the statute, the... Intercity Passenger Rail Service,'' on the FRA's Web site. Simultaneously, the FRA published a notice in the...

19 CFR 4.50 - Passenger lists.

Science.gov (United States)

2010-04-01

... VESSELS IN FOREIGN AND DOMESTIC TRADES Passengers on Vessels § 4.50 Passenger lists. (a) The master of... passenger and crew lists, as required by § 4.7(a) of this part. If the vessel is arriving from noncontiguous... 19 Customs Duties 1 2010-04-01 2010-04-01 false Passenger lists. 4.50 Section 4.50 Customs Duties...

A long-distance travel demand model for Europe

DEFF Research Database (Denmark)

Rich, Jeppe; Mabit, Stefan Lindhard

2012-01-01

of different level-of-service variables. The results suggest that the perception of both travel time and cost varies with journey length in a non-linear way. For car drivers and car passengers, elasticities increase with the length of the journey, whereas the opposite is true for rail, bus, and air passengers...... relevant from a political and environmental point of view. The paper presents the first tour-based long-distance travel demand model for passenger trips in and between 42 European countries. The model is part of a new European transport model developed for the European Commission, the TRANSTOOLS II model......, and will serve as an important tool for transport policy analysis at a European level. The model is formulated as a nested logit model and estimated based on travel diary data with segmentation into business, private, and holiday trips. We analyse the estimation results and present elasticities for a number...

Panorama 2009 - trends and challenges in passenger mobility

International Nuclear Information System (INIS)

2008-01-01

Current demand for mobility encourages people to seek fast, individual means of transport. The automobile accounts for the bulk of passenger travel worldwide. This mode of transport is a source of annoying and harmful effects including noise, accidents, deteriorating infrastructure, traffic congestion and pollution (local and atmospheric). Some of these issues are now under regulation and have become less acute, but traffic congestion and greenhouse gas emissions are still major problems. Before assessing any policy undertaken to curb nuisance levels and harmful effects, one must be familiar with global mobility trends and the challenges involved

Develop and pilot test smart phone/tablet app for paratransit demand-response passenger pick-up alerts to assist passengers with disabilities and reduce no-shows and dwell times.

Science.gov (United States)

2016-12-01

This research produced an arrival notification system for paratransit passengers with disabilities. Almost all existing curb-to-curb paratransit services have significantly large pick-up time window ranging from 20 to 40 minutes from the scheduled ti...

Vulnerability analysis and passenger source prediction in urban rail transit networks.

Directory of Open Access Journals (Sweden)

Junjie Wang

Full Text Available Based on large-scale human mobility data collected in San Francisco and Boston, the morning peak urban rail transit (URT ODs (origin-destination matrix were estimated and the most vulnerable URT segments, those capable of causing the largest service interruptions, were identified. In both URT networks, a few highly vulnerable segments were observed. For this small group of vital segments, the impact of failure must be carefully evaluated. A bipartite URT usage network was developed and used to determine the inherent connections between urban rail transits and their passengers' travel demands. Although passengers' origins and destinations were easy to locate for a large number of URT segments, a few show very complicated spatial distributions. Based on the bipartite URT usage network, a new layer of the understanding of a URT segment's vulnerability can be achieved by taking the difficulty of addressing the failure of a given segment into account. Two proof-of-concept cases are described here: Possible transfer of passenger flow to the road network is here predicted in the cases of failures of two representative URT segments in San Francisco.

An empirical study of direct rebound effect for passenger transport in urban China

International Nuclear Information System (INIS)

Wang, H.; Zhou, P.; Zhou, D.Q.

2012-01-01

Transport sector accounts for about 8% of total energy consumption in China and this share will likely increase in the visible future. Improving energy efficiency has been considered as a major way for reducing transport energy use, whereas its effectiveness might be affected by the rebound effect. This paper estimates the direct rebound effect for passenger transport in urban China by using the linear approximation of the Almost Ideal Demand System model and simulation analysis. Our empirical results reveal the existence of direct rebound effect for passenger transport in urban China. A majority of the expected reduction in transport energy consumption from efficiency improvement could be offset due to the existence of rebound effect. We have further investigated the relationship between the magnitude of direct rebound effect and households' expenditure. It was found that the direct rebound effect for passenger transport tends to decline with the increase of per capita household consumption expenditure. - Highlights: ► The magnitude of direct rebound effect for urban passenger transport in China is 96%. ► The rebound effect in China could be larger than that in developed countries. ► The rebound effect in China declined with the increase of per capita expenditure.

Forecasted electric power demands for the Baltimore Gas and Electric Company. Volume 1 and Volume 2. Documentation manual

International Nuclear Information System (INIS)

Estomin, S.L.; Beach, J.E.; Goldsmith, J.V.

1991-05-01

The two-volume report presents the results of an econometric forecast of peak load and electric power demand for the Baltimore Gas and Electric Company (BG ampersand E) through the year 2009. Separate energy sales models were estimated for residential sales in Baltimore City, residential sales in the BG ampersand E service area excluding Baltimore City, commercial sales, industrial sales, streetlighting sales, and Company use plus losses. Econometric equations were also estimated for electric space heating and air conditioning saturation in Baltimore City and in the remainder of the BG ampersand E service territory. In addition to the energy sales models and the electric space conditioning saturation models, econometric models of summer and winter peak demand on the BG ampersand E system were estimated

Passengers, Information, and Disruptions

NARCIS (Netherlands)

E. van der Hurk (Evelien)

2015-01-01

markdownabstract__Abstract__ Passengers traveling in public transport generate a detailed digital track record of their journey through using automated fare collection systems and carrying mobile devices. This information on passenger behavior has only recently become available to public

A volume flexible inventory model with trapezoidal demand under inflation

Directory of Open Access Journals (Sweden)

kapil mehrotra

2014-02-01

Full Text Available Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Abstract   This article experiment. Further, the effects of different parameters are analysed by performing sensitivity analyses on the optimal policy. explores an economic production quantity model (EPQ model for deteriorating items with time-dependent demand following trapezoidal pattern taking the volume flexibility into account. We have also considered the inflation and time value of money. The solution of the model aims at determining the optimal production run-time in order to maximize the profit. The model is also illustrated by means of numerical

Optimizing Bus Passenger Complaint Service through Big Data Analysis: Systematized Analysis for Improved Public Sector Management

Directory of Open Access Journals (Sweden)

Weng-Kun Liu

2016-12-01

Full Text Available With the advances in industry and commerce, passengers have become more accepting of environmental sustainability issues; thus, more people now choose to travel by bus. Government administration constitutes an important part of bus transportation services as the government gives the right-of-way to transportation companies allowing them to provide services. When these services are of poor quality, passengers may lodge complaints. The increase in consumer awareness and developments in wireless communication technologies have made it possible for passengers to easily and immediately submit complaints about transportation companies to government institutions, which has brought drastic changes to the supply–demand chain comprised of the public sector, transportation companies, and passengers. This study proposed the use of big data analysis technology including systematized case assignment and data visualization to improve management processes in the public sector and optimize customer complaint services. Taichung City, Taiwan, was selected as the research area. There, the customer complaint management process in public sector was improved, effectively solving such issues as station-skipping, allowing the public sector to fully grasp the service level of transportation companies, improving the sustainability of bus operations, and supporting the sustainable development of the public sector–transportation company–passenger supply chain.

Intercity Travel Demand Analysis Model

Directory of Open Access Journals (Sweden)

Ming Lu

2014-01-01

Full Text Available It is well known that intercity travel is an important component of travel demand which belongs to short distance corridor travel. The conventional four-step method is no longer suitable for short distance corridor travel demand analysis for the time spent on urban traffic has a great impact on traveler's main mode choice. To solve this problem, the author studied the existing intercity travel demand analysis model, then improved it based on the study, and finally established a combined model of main mode choice and access mode choice. At last, an integrated multilevel nested logit model structure system was built. The model system includes trip generation, destination choice, and mode-route choice based on multinomial logit model, and it achieved linkage and feedback of each part through logsum variable. This model was applied in Shenzhen intercity railway passenger demand forecast in 2010 as a case study. As a result, the forecast results were consistent with the actuality. The model's correctness and feasibility were verified.

Determinants of injuries in passenger vessel accidents.

Science.gov (United States)

Yip, Tsz Leung; Jin, Di; Talley, Wayne K

2015-09-01

This paper investigates determinants of crew and passenger injuries in passenger vessel accidents. Crew and passenger injury equations are estimated for ferry, ocean cruise, and river cruise vessel accidents, utilizing detailed data of individual vessel accidents that were investigated by the U.S. Coast Guard during the time period 2001-2008. The estimation results provide empirical evidence (for the first time in the literature) that crew injuries are determinants of passenger injuries in passenger vessel accidents. Copyright © 2015 Elsevier Ltd. All rights reserved.

Passenger and freight transport perspectives for 2035. Background report for transport policy discussion; Henkiloe- ja tavaraliikenteen kehityskuva 2035. Taustaraportti liikennepoliittiseen keskusteluun

Energy Technology Data Exchange (ETDEWEB)

Luukkonen, T.; Maekelae, T.; Pollanen, M.; Kalenoja, H.; Mantynen, J.; Rantala, J.

2012-07-01

This study aims to image the perspectives for future transport on the basis of existing estimates and expert views. The results of this study offer a justified perception of how Finnish passenger and freight transport will develop up to year 2035. The study also includes six 'what if' analysis which address how six individual and important changes could affect transports. The development of population and the economy are key factors in the operating environment of passenger and freight transport. To a large extent, they determine the development of the demand for passenger and freight transport. Earlier population forecasts have underestimated population growth in Finland. Uncertainty also surrounds regional demographic development, which is connected both to the development of community structure and land use, and to time use and consumption habits associated with travel preferences. The development of the economy, which also involves considerable uncertainty, is connected to population through developments in employment and income levels, among others, while growing workplace areas also attract people and increase commuting, for example. Changing travel habits and ageing of the population influence the overall demand for passenger transport. Efforts are being made to promote walking, cycling and the use of public transport. In the future these means of transport will be supported by factors such as increased awareness of the environment and health, and concentration of population in cities. While the aim is to constrain the growth of passenger car traffic, rising income levels and travel distances in the operating environment will serve to increase passenger car traffic and the demand for long-distance train, flight and bus traffic. The supply of different transport methods and the costs of their use will, for their part, affect transport mode distribution. The development of the economy and various sectors will determine the demand for freight

International Passenger and Freight Report

Data.gov (United States)

Department of Transportation — The International Passenger and Freight report is a summarization of all passengers and all freight transported between the U.S. and foreign countries combined, with...

Telemedical Advice to Long Distance Passenger Ferries

DEFF Research Database (Denmark)

Jensen, Olaf Chresten; Bøggild, Niels Bo; Kristensen, Søren

consultations with passenger ferries to identify areas for possible improvements. Methods: Data from the journals for one year from Radio Medical Denmark consultations with the medical Data from the journals for one year from Radio Medical Denmark consultations with the medical responsible officers on passenger...... ferries was analysed retrospectively. Results: Two hundred and fourteen RM records, 73% among passenger and 27% among crewmember Two hundred and fourteen RM records, 73% among passenger and 27% among crewmember patients were analysed. Passenger patients were generally older and more serious ill than...

Rational Formations of a Metro Train Improve Its Efficiencies of Both Traction Energy Utilization and Passenger Transport

Directory of Open Access Journals (Sweden)

Xuesong Feng

2013-01-01

Full Text Available Based on simulations of passenger transports of two representative types of metro trains in China, this study analyzes efficiencies of energy consumption and passenger transport of a metro train in the effect of its target speed, formation scale (FS (i.e., length and mass of the formation, relative traction capacity (RTC (i.e., ratio of the motoring cars to all its cars, and so forth. It is found that increasing energy cost efficiency of a metro train with decreasing its target speed is evidently accelerated with reducing its RTC below 0.50 at the expense of obviously lowering its passenger transport efficiency. Moreover, if the passenger capacity of the train is sufficiently utilized, increasing its FS for the same RTC is easy to have its passenger transport efficiency improved significantly even for a meanwhile much decreased target speed with consuming energy less intensively. Therefore, metro trains in peak hours may take comparatively big FSs, relatively high target speeds, and RTCs over 0.50 to meet usually urgent and large-scale travel demands in such time. In contrast, trains in nonpeak hours ought to have small FSs, relatively low target speeds, and RTCs smaller than 0.50 for mainly avoiding energy waste.

Parents as passengers during pediatric transport.

Science.gov (United States)

Lewis, M M; Holditch-Davis, D; Brunssen, S

1997-01-01

The transport environment presents a unique setting in which the feasibility, advantages, and disadvantages of passengers accompanying a patient must be assessed carefully. The purpose of this study was to describe the current practice of including parents as passengers during pediatric interfacility transport. One-hundred-eighty-eight critical care transport programs in the United States responded to a voluntary mail survey, providing information about current policies, practices, and crew perceptions of the advantages and disadvantages of carrying parents as passengers. Extra seating for passengers was available in 96% of ambulances, 86% of fixed-wing aircraft, and 54% of helicopters used for pediatric transport. Parents traveled as passengers in all types of vehicles; most frequently in ambulances and fixed-wing aircraft. Twenty percent of helicopter programs allowed parent passengers on more than half of their pediatric transports in this vehicle. Advantages of parent passengers included emotional benefit for the parent and child, availability of parents for history and consent, good public relations, and having the parent present if the child dies. Disadvantages included potential parent anxiety, crew distraction, and space limitations. This study reflects the widely diverse policies, practices, and opinions relevant to this topic and confirms a need for further study.

Dynamic Passenger Assignment during Disruptions in Railway Systems

NARCIS (Netherlands)

Zhu, Y.; Goverde, R.M.P.

2017-01-01

Passenger-oriented rescheduling problems receive increasing attention. However, the passenger assignment models used for evaluating the rescheduling solutions are usually simplified by many assumptions. To estimate passenger inconvenience more accurately, this paper establishes a dynamic passenger

Access improvement to aircraft passengers' hand luggage.

Science.gov (United States)

Alberda, W; Kampinga, O; Kassels, R; van Kester, R; Noriega, J; Vink, P

2015-01-01

Efficient use of space and passenger comfort in aircraft interiors are major issues. There is not much research available about the flying experience regarding passengers' personal belongings. The objective of this study is to explore concepts within the current aircraft seats which improve the passenger experience related to their personal belongings like wallets, mobile phones and laptops. Through on-site observations, interviews and online questionnaires, data regarding the number of personal belongings taken into the airplane and opinions about access to hand luggage were gathered. These data were used to develop different concepts to optimize the aircraft interior, which were evaluated by passengers. Almost every passenger carries a phone (88%), wallet (94%), travel documents (98%) and keys (76%) with them and they like to have these stored close by. Passengers rate the concept that provides integrated storage in the tray table of the aircraft seat the best. Extra storage possibility in the table-tray seems a promising solution according to the passengers.

Network structure of subway passenger flows

Science.gov (United States)

Xu, Q.; Mao, B. H.; Bai, Y.

2016-03-01

The results of transportation infrastructure network analyses have been used to analyze complex networks in a topological context. However, most modeling approaches, including those based on complex network theory, do not fully account for real-life traffic patterns and may provide an incomplete view of network functions. This study utilizes trip data obtained from the Beijing Subway System to characterize individual passenger movement patterns. A directed weighted passenger flow network was constructed from the subway infrastructure network topology by incorporating trip data. The passenger flow networks exhibit several properties that can be characterized by power-law distributions based on flow size, and log-logistic distributions based on the fraction of boarding and departing passengers. The study also characterizes the temporal patterns of in-transit and waiting passengers and provides a hierarchical clustering structure for passenger flows. This hierarchical flow organization varies in the spatial domain. Ten cluster groups were identified, indicating a hierarchical urban polycentric structure composed of large concentrated flows at urban activity centers. These empirical findings provide insights regarding urban human mobility patterns within a large subway network.

Forecasted electric power demands for the Delmarva Power and Light Company. Volume 1 and Volume 2. Documentation manual

International Nuclear Information System (INIS)

Estomin, S.L.; Beach, J.E.

1990-10-01

The two-volume report presents the results of an econometric forecast of peak load and electric power demands for the Delmarva Power and Light Company (DP ampersand L) through the year 2008. Separate sets of models were estimated for the three jurisdictions served by DP ampersand L: Delaware, Maryland and Virginia. For both Delaware and Maryland, econometric equations were estimated for residential, commercial, industrial, and streetlighting sales. For Virginia, equations were estimated for residential, commercial plus industrial, and streetlighting sales; separate industrial and commercial equations were not estimated for Virginia due to the relatively small size of DP ampersand L's Virginia Industrial load. Wholesale sales were econometrically estimated for the DP ampersand L system as a whole. In addition to the energy sales models, an econometric model of annual (summer) peak demand was estimated for the Company

Technology assessment of future intercity passenger transportation systems. Volume 7: Study recommendations

Science.gov (United States)

1976-01-01

Research and analysis tasks to alleviate negative impacts, to augment positive impacts, or to better understand the impacts produced by the potential introduction of the alternate transportation technologies are identified. The project team's recommendations on research and analysis efforts which have resulted from the technology assessment are provided. Many of the recommendations apply to the future supply of intercity passenger transportation services, categorized by mode. Other recommendations pertain to broad issues in intercity transportation--e.g., finance, regulation, traveler values--that will affect all modes.

Teen Drivers' Perceptions of Their Peer Passengers: Qualitative Study.

Science.gov (United States)

Ehsani, Johnathon P; Haynie, Denise L; Luthers, Christina; Perlus, Jessamyn; Gerber, Eli; Ouimet, Marie Claude; Klauer, Sheila G; Simons-Morton, Bruce

The presence of peer passengers increases teenage drivers' fatal crash risk. Distraction and social influence are the two main factors that have been associated with increased risk. Teen drivers' perceptions of their peer passengers on these factors could inform our understanding of the conditions under which peer passengers increase crash risk or promote safer driving. The purpose of this study was to examine teen drivers' perceptions of their peer passengers on distraction and social influence. A convenience sample of male and female drivers participated in a semi-structured interview that included questions on their perceptions of the effects of peer passengers on driving on distraction and social influence. The analysis of the interviews was guided by a grounded theory approach. Teenage drivers were aware of the risk that peer passengers posed. Some described having passengers in the vehicle as distracting, and recognized that the level of distraction increased with the number of passengers in the vehicle. Drivers that felt responsible for the safety of their peer passengers described strategies they used to control the in-vehicle environment. Drivers described driving with passengers as a performance, and articulated direct and indirect sources of pressure, gender norms, and unspoken expectations of their passengers as influencing their driving behavior. The influence of passengers is situation specific and dependent on whom the passenger(s) may be. Passenger influence may be either protective or harmful, depending on the circumstances. Some passengers exert direct influence, but often their influence appears more indirect and subtle.

Meeting Air Transportation Demand in 2025 by Using Larger Aircraft and Alternative Routing to Complement NextGen Operational Improvements

Science.gov (United States)

Smith, Jeremy C.; Guerreiro, Nelson M.; Viken, Jeffrey K.; Dollyhigh, Samuel M.; Fenbert, James W.

2010-01-01

A study was performed that investigates the use of larger aircraft and alternative routing to complement the capacity benefits expected from the Next Generation Air Transportation System (NextGen) in 2025. National Airspace System (NAS) delays for the 2025 demand projected by the Transportation Systems Analysis Models (TSAM) were assessed using NASA s Airspace Concept Evaluation System (ACES). The shift in demand from commercial airline to automobile and from one airline route to another was investigated by adding the route delays determined from the ACES simulation to the travel times used in the TSAM and re-generating new flight scenarios. The ACES simulation results from this study determined that NextGen Operational Improvements alone do not provide sufficient airport capacity to meet the projected demand for passenger air travel in 2025 without significant system delays. Using larger aircraft with more seats on high-demand routes and introducing new direct routes, where demand warrants, significantly reduces delays, complementing NextGen improvements. Another significant finding of this study is that the adaptive behavior of passengers to avoid congested airline-routes is an important factor when projecting demand for transportation systems. Passengers will choose an alternative mode of transportation or alternative airline routes to avoid congested routes, thereby reducing delays to acceptable levels for the 2025 scenario; the penalty being that alternative routes and the option to drive increases overall trip time by 0.4% and may be less convenient than the first-choice route.

Experimental analysis of fuzzy controlled energy efficient demand controlled ventilation economizer cycle variable air volume air conditioning system

Directory of Open Access Journals (Sweden)

Rajagopalan Parameshwaran

2008-01-01

Full Text Available In the quest for energy conservative building design, there is now a great opportunity for a flexible and sophisticated air conditioning system capable of addressing better thermal comfort, indoor air quality, and energy efficiency, that are strongly desired. The variable refrigerant volume air conditioning system provides considerable energy savings, cost effectiveness and reduced space requirements. Applications of intelligent control like fuzzy logic controller, especially adapted to variable air volume air conditioning systems, have drawn more interest in recent years than classical control systems. An experimental analysis was performed to investigate the inherent operational characteristics of the combined variable refrigerant volume and variable air volume air conditioning systems under fixed ventilation, demand controlled ventilation, and combined demand controlled ventilation and economizer cycle techniques for two seasonal conditions. The test results of the variable refrigerant volume and variable air volume air conditioning system for each techniques are presented. The test results infer that the system controlled by fuzzy logic methodology and operated under the CO2 based mechanical ventilation scheme, effectively yields 37% and 56% per day of average energy-saving in summer and winter conditions, respectively. Based on the experimental results, the fuzzy based combined system can be considered to be an alternative energy efficient air conditioning scheme, having significant energy-saving potential compared to the conventional constant air volume air conditioning system.

Increased mechanical cost of walking in children with diplegia: the role of the passenger unit cannot be neglected.

Science.gov (United States)

Van de Walle, P; Hallemans, A; Truijen, S; Gosselink, R; Heyrman, L; Molenaers, G; Desloovere, K

2012-01-01

Gait efficiency in children with cerebral palsy is decreased. To date, most research did not include the upper body as a separate functional unit when exploring these changes in gait efficiency. Since children with spastic diplegia often experience problems with trunk control, they could benefit from separate evaluation of the so-called 'passenger unit'. Therefore, the aim of the current study was to improve insights in the role of the passenger unit in decreased gait efficiency in children with diplegia. Mechanical cost of walking was investigated by calculating work by the integrated joint power approach in 18 children with diplegia and 25 age-related typical developing controls. The total mechanical work in children with diplegia was 1.5 times higher than in typical children. In children with diplegia work at the lower limbs was increased by 37% compared to typical children. Substantially higher increases, up to 222%, were noted at the passenger unit. Trunk and head were the main contributors to the increased work of the passenger unit, but the role of the arms cannot be neglected. Due to these disproportional increases in locomotor and passenger unit, the demands of the passenger unit in pathological gait can no longer be considered minor, as in typical gait. Therefore, the role of the passenger unit must be recognized in the decrease of gait efficiency in children with spastic diplegia and should be part of the evaluation of gait efficiency in clinical practice. Copyright © 2012 Elsevier Ltd. All rights reserved.

46 CFR 115.910 - Passenger Ship Safety Certificate.

Science.gov (United States)

2010-10-01

...) The route specified on the Certificate of Inspection and the SOLAS Passenger Ship Safety Certificate... 46 Shipping 4 2010-10-01 2010-10-01 false Passenger Ship Safety Certificate. 115.910 Section 115... MORE THAN 150 PASSENGERS OR WITH OVERNIGHT ACCOMMODATIONS FOR MORE THAN 49 PASSENGERS INSPECTION AND...

Optimizing Bus Frequencies under Uncertain Demand: Case Study of the Transit Network in a Developing City

Directory of Open Access Journals (Sweden)

Zhengfeng Huang

2013-01-01

Full Text Available Various factors can make predicting bus passenger demand uncertain. In this study, a bilevel programming model for optimizing bus frequencies based on uncertain bus passenger demand is formulated. There are two terms constituting the upper-level objective. The first is transit network cost, consisting of the passengers’ expected travel time and operating costs, and the second is transit network robustness performance, indicated by the variance in passenger travel time. The second term reflects the risk aversion of decision maker, and it can make the most uncertain demand be met by the bus operation with the optimal transit frequency. With transit link’s proportional flow eigenvalues (mean and covariance obtained from the lower-level model, the upper-level objective is formulated by the analytical method. In the lower-level model, the above two eigenvalues are calculated by analyzing the propagation of mean transit trips and their variation in the optimal strategy transit assignment process. The genetic algorithm (GA used to solve the model is tested in an example network. Finally, the model is applied to determining optimal bus frequencies in the city of Liupanshui, China. The total cost of the transit system in Liupanshui can be reduced by about 6% via this method.

PASSENGER FLOWS PREDICTION IN MAJOR TRANSPORTATION HUBS

Directory of Open Access Journals (Sweden)

O. O. Ozerova

2013-11-01

Full Text Available Purpose. An effective organization of passenger traffic, due to the reliability prediction of traffic flow in passenger transport hubs. In order to determine the parameters of prospective passenger transport areas it is essential to analyze the impact of various factors and determine the most influential ones. Methodology. The article presents the method of paired linear correlation for a more influential factors on passengers in intercity and commuter and possible use in predicting the linear regression equations. Passenger transport vessel areas and branches of industry are interconnected and are in the ratio of passengers and production. Findings. It is found that the coefficient of correlation is in complex dependence on the duration of the period of retrospective analysis. Evaluation of reliability correlation coefficients and coefficients of predictive models led to the conclusion that the population gives the most accurate prediction of passenger flows, providing account of changes in Ukraine during the period of transformation. Originality. Equations of dependence on the impact of macroeconomic indicators were obtained and the evaluation of the reliability results was received. Practical value. The results of analysis and calculations will make short-term forecasting of traffic flow.

Baseline Projection Data Book: GRI baseline projection of U.S. Energy Supply and Demand to 2010. 1992 Edition. Volume 1 and Volume 2

International Nuclear Information System (INIS)

Holtberg, P.D.; Woods, T.J.; Lihn, M.L.; Koklauner, A.K.

1992-01-01

The 1992 Baseline Projection Data Book provides backup data in tabular form for the 1992 GRI Baseline Projection of U.S. Energy Supply and Demand to 2010. Summary tables and data for the residential, commercial, industrial, electric utility, and transportation sectors are presented in the volume

US Advanced Freight and Passenger MAGLEV System

Science.gov (United States)

Morena, John J.; Danby, Gordon; Powell, James

1996-01-01

Japan and Germany will operate first generation Maglev passenger systems commercially shortly after 2000 A.D. The United States Maglev systems will require sophisticated freight and passenger carrying capability. The U.S. freight market is larger than passenger transport. A proposed advanced freight and passenger Maglev Project in Brevard County Florida is described. Present Maglev systems cost 30 million dollars or more per mile. Described is an advanced third generation Maglev system with technology improvements that will result in a cost of 10 million dollars per mile.

Getting passengers out : evacuation behaviours

NARCIS (Netherlands)

Boer, L.C.

2003-01-01

When disaster strikes, mass transportation means mass evacuation. The issue is especially urgent if, despite precautions, a train comes to a stop in a tunnel and there is a fire. Adequate behaviour of passengers is a major success factor of an evacuation. Passengers should replace their original

Optimal boarding method for airline passengers

Energy Technology Data Exchange (ETDEWEB)

Steffen, Jason H.; /Fermilab

2008-02-01

Using a Markov Chain Monte Carlo optimization algorithm and a computer simulation, I find the passenger ordering which minimizes the time required to board the passengers onto an airplane. The model that I employ assumes that the time that a passenger requires to load his or her luggage is the dominant contribution to the time needed to completely fill the aircraft. The optimal boarding strategy may reduce the time required to board and airplane by over a factor of four and possibly more depending upon the dimensions of the aircraft. I explore some features of the optimal boarding method and discuss practical modifications to the optimal. Finally, I mention some of the benefits that could come from implementing an improved passenger boarding scheme.

Telemedical advice to long-distance passenger ferries

DEFF Research Database (Denmark)

Jensen, Olaf C; Bo Bøggild, Niels; Kristensen, Søren

2005-01-01

BACKGROUND: Radio medical (RM) advice for seafarers and traveling passengers is important and can be crucial for the optimal medical treatment on board ships. The aim of this study was to analyze the data from consultations with passenger ferries to identify areas for possible improvements. METHODS......: Data from the journals for 1 year from Radio Medical Denmark consultations with the medical officers on passenger ferries were analyzed retrospectively. RESULTS: Two hundred fourteen RM records, 73% pertaining to passengers and 27% for crew members, were analyzed. Passenger patients were generally...... complaints, and more than half of these involved severe or considerable pain. Only acetaminophen (paracetamol) and opioids were in the ferry medicine chest. At least 77 patients would have benefited from use of nonsteroidal anti-inflammatory drugs. CONCLUSIONS: The paramedical assistance and the medicine...

Level of service at airport passenger terminals

Directory of Open Access Journals (Sweden)

Tasić Tamara D.

2016-01-01

Full Text Available Airport terminals are designed by level of service standards which are regulated by International Air Transport Association (IATA. Level of service offered to passengers, regarding to the primary processes, is not necessarily equivalent to the level of service perceived by them. The fact that passengers spending longer times in terminals makes the secondary processes more important in passenger experience. Aiming to improving airport attractiveness, and business success, passenger perception is approached by paying close attention. This paper discusses the two aspects of level of service. Concept of level of service used in air traffic industry with purpose of designing and planning of passenger terminal is derived from the Highway Capacity Manual. Subject of the paper regards last changes which have been introduced during 2014. Second part of the paper explains the needs of examining and analyzing passenger perception from the management point of view, and gives overview of methods which are conducted during researches. Similarities and differences are shown among measurements of level of service and perceived level of service, including the importance of these aspects mutual complementing.

49 CFR 223.15 - Requirements for existing passenger cars.

Science.gov (United States)

2010-10-01

... 49 Transportation 4 2010-10-01 2010-10-01 false Requirements for existing passenger cars. 223.15... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION SAFETY GLAZING STANDARDS-LOCOMOTIVES, PASSENGER CARS AND CABOOSES Specific Requirements § 223.15 Requirements for existing passenger cars. (a) Passenger cars built or...

The Effect of Passengers on Teen Driver Behavior

Science.gov (United States)

2012-04-01

A number of studies have shown that passengers substantially increase the risk of crashes for young, novice drivers. This increased risk may result from distractions that young passengers create for drivers. Alternatively, the presence of passengers ...

Comparison of policies on vehicle ownership and use between Beijing and Shanghai and their impacts on fuel consumption by passenger vehicles

International Nuclear Information System (INIS)

Hao Han; Wang Hewu; Ouyang Minggao

2011-01-01

The fast growth of vehicle population in China has caused problems such as traffic congestion and excessive fuel consumption. There have been demands for policy control on growth in private vehicle travel demand. Beijing and Shanghai are China's first two cities to implement policies on vehicle ownership and use. In this paper, we compared policies in the two cities and estimated their impacts on fuel consumption by passenger vehicles. The limitation of vehicle use in Beijing provides limited but immediate reduction in fuel consumption. The limitation of vehicle ownership in Shanghai provides large potential of fuel conservation in a longer term. Under current policy, fuel consumptions by passenger vehicles in Beijing and Shanghai in 2020 were estimated to reach 7.5 and 3.9 billion liters, respectively. The experiences of Beijing and Shanghai are highly relevant for cities in China and abroad that are facing the same problems. - Research Highlights: → Beijing and Shanghai are the first two cities in China to implement policies on vehicle ownership and use. This paper compared policies in the two cities and evaluated their effectiveness. → A bottom-up model was established to simulate the fuel consumption by passenger vehicles. By using this model, fuel consumptions by passenger vehicles in Beijing and Shanghai from 1990 to 2020 under two scenarios of current policy and no policy were estimated. Under current policy, fuel consumptions by passenger vehicles in Beijing and Shanghai in 2020 were estimated to reach 7.5 and 3.9 billion liters, respectively. → This paper discussed the benefits and negative impacts of policies in Beijing and Shanghai, which are highly relevant for cities in China and abroad that are facing the problems of traffic congestion and excessive vehicle fuel consumption.

Carbon emissions from international cruise ship passengers' travel to and from New Zealand

International Nuclear Information System (INIS)

Howitt, Oliver J.A.; Revol, Vincent G.N.; Smith, Inga J.; Rodger, Craig J.

2010-01-01

Greenhouse gas emissions from international transport contribute to anthropogenic global warming, yet these emissions are not liable under the Kyoto Protocol. International attention is being given to quantifying such emissions. This paper presents the results of research into international cruise ship journeys to and from New Zealand. CO 2 emissions from such journeys were calculated using an activity based, or 'bottom-up', model. Emissions factors for individual journeys by cruise ships to or from New Zealand in 2007 ranged between 250 and 2200 g of CO 2 per passenger-kilometre (g CO 2 per p-km), with a weighted mean of 390 g CO 2 per p-km. The weighted mean energy use per passenger night for the 'hotel' function of these cruise vessels was estimated as 1600 MJ per visitor night, 12 times larger than the value for a land-based hotel. Using a simple price elasticities calculation, international cruise journeys for transport purposes were found to have a greater relative decrease in demand than plane journeys when the impact of carbon pricing was analysed. The potential to decrease the CO 2 emissions per p-km was examined, and if passenger accommodation was compacted and some luxury amenities dispensed with values similar to those of economy-class air travel were obtained.

Compact gasoline fuel processor for passenger vehicle APU

Science.gov (United States)

Severin, Christopher; Pischinger, Stefan; Ogrzewalla, Jürgen

Due to the increasing demand for electrical power in today's passenger vehicles, and with the requirements regarding fuel consumption and environmental sustainability tightening, a fuel cell-based auxiliary power unit (APU) becomes a promising alternative to the conventional generation of electrical energy via internal combustion engine, generator and battery. It is obvious that the on-board stored fuel has to be used for the fuel cell system, thus, gasoline or diesel has to be reformed on board. This makes the auxiliary power unit a complex integrated system of stack, air supply, fuel processor, electrics as well as heat and water management. Aside from proving the technical feasibility of such a system, the development has to address three major barriers:start-up time, costs, and size/weight of the systems. In this paper a packaging concept for an auxiliary power unit is presented. The main emphasis is placed on the fuel processor, as good packaging of this large subsystem has the strongest impact on overall size. The fuel processor system consists of an autothermal reformer in combination with water-gas shift and selective oxidation stages, based on adiabatic reactors with inter-cooling. The configuration was realized in a laboratory set-up and experimentally investigated. The results gained from this confirm a general suitability for mobile applications. A start-up time of 30 min was measured, while a potential reduction to 10 min seems feasible. An overall fuel processor efficiency of about 77% was measured. On the basis of the know-how gained by the experimental investigation of the laboratory set-up a packaging concept was developed. Using state-of-the-art catalyst and heat exchanger technology, the volumes of these components are fixed. However, the overall volume is higher mainly due to mixing zones and flow ducts, which do not contribute to the chemical or thermal function of the system. Thus, the concept developed mainly focuses on minimization of those

Reform of refined oil product pricing mechanism and energy rebound effect for passenger transportation in China

International Nuclear Information System (INIS)

Lin, Boqiang; Liu, Xia

2013-01-01

Improving energy efficiency is the primary method adopted by the Chinese government in an effort to achieve energy conservation target in the transport sector. However, the offsetting effect of energy rebound would greatly reduce its real energy-saving potentials. We set up a Linear Approximation of the Almost Ideal Demand System Model (LA-AIDS model) to estimate the rebound effect for passenger transportation in China. Real energy conservation effect of improving energy efficiency can also be obtained in the process. The result shows that the rebound effect is approximately 107.2%. This figure signifies the existence of ‘backfire effect’, indicating that efficiency improvement in practice does not always lead to energy-saving. We conclude that one important factor leading to the rebound effect, is the refined oil pricing mechanism. China's refined oil pricing mechanism has been subjected to criticism in recent years. The results of simulation analysis show that the rebound could be reduced to approximately 90.7% if the refined oil pricing mechanism is reformed. In this regard, we suggest further reforms in the current refined oil pricing mechanism. - Highlights: ► We set up the LA-AIDS model to estimate traffic service demand for urban residents. ► The size of the rebound effect for passenger transportation in China is evaluated. ► The rebound effect for passenger transportation in China is 107.2%. ► Reform of oil pricing could reduced the rebound to 90.7%. ► Reform of oil pricing might be an effective method for mitigating rebound effect

Carbon dioxide emissions from passenger transport in China since 1949: Implications for developing sustainable transport

International Nuclear Information System (INIS)

Loo, Becky P.Y.; Li, Linna

2012-01-01

This paper traces the historical evolution and spatial disparity of CO 2 emissions from passenger transport in China. The general trends of CO 2 emissions from four passenger transport modes are estimated by both the distance-based and fuel-based methods. The results suggest that CO 2 emissions from road transport represented the leading source of passenger transport CO 2 emissions in China. Moreover, they have continued to grow rapidly. Air transport was the second largest contributor since 1998. Emissions from rail and water transport have remained relatively stable with lower emission intensity. At the provincial level, great regional disparity was noticeable, especially in road transport. Moreover, the decomposition analysis shows that income growth was the principal factor leading to the growth of passenger transport CO 2 emissions in China for both the 1949–1979 and 1980–2009 periods. The second most important factor was increased transport intensity and modal shifts for the former and the latter period, respectively. The main factor contributed to emission reduction was the lower emission intensity supported by policies, although the effect was weak. In the future, more policies to encourage modal shifts toward sustainable transport modes and travel reduction should be encouraged. - Highlights: ► CO 2 emissions from passenger transport in China were estimated. ► Road transport was the largest contributor to CO 2 emission. Air transport followed. ► Factors influencing CO 2 emissions growth are analyzed by decomposition analysis. ► Income growth, higher travel intensity and modal shift were driving CO 2 emissions up. ► Policies to promote modal shifts and travel demand reduction should be encouraged.

Passenger transport and household activity patterns

DEFF Research Database (Denmark)

Jørgensen, Kaj

1997-01-01

Review of Danish passenger transport patterns and analysis of energy consumption, emissions and safety impacts for selected typical households' travelling......Review of Danish passenger transport patterns and analysis of energy consumption, emissions and safety impacts for selected typical households' travelling...

Analyzing injury severity of bus passengers with different movements.

Science.gov (United States)

Li, Duo; Zhao, Yifei; Bai, Qiang; Zhou, Bei; Ling, Hongbiao

2017-07-04

Though public transport vehicles are rarely involved in mass casualty accidents, when they are, the number of injuries and fatalities is usually high due to the high passenger capacity. Of the few studies that have been conducted on bus safety, the majority focused on vehicle safety features, road environmental factors, as well as driver characteristics. Nevertheless, few studies have attempted to investigate the underlying risk factors related to bus occupants. This article presents an investigation aimed at identifying the risk factors affecting injury severity of bus passengers with different movements. Three different passenger movement types including standing, seated, and boarding/alighting were analyzed individually using classification and regression tree (CART) method based on publicly available accident database of Great Britain. According to the results of exploratory analyses, passenger age and vehicle maneuver are associated with passenger injury severity in all 3 types of accidents. Moreover, the variable "skidding and overturning" is associated with injury severity of seated passengers and driver age is correlated with injury severity of standing and boarding/alighting passengers. The CART method shows its ability to identify and easily explain the complicated patterns affecting passenger injury severity. Several countermeasures to reduce bus passenger injury severity are recommended.

Energy consumption and environmental effects of passenger transport modes. A life cycle study on passenger transport modes

International Nuclear Information System (INIS)

Kalenoja, H.

1996-01-01

Energy consumption and environmental effects of different passenger transport modes vary on the different stages of the fuel chain and during the production and maintenance of vehicles and infrastructure. Energy consumption and the environmental effects calculated per passenger mileage depend strongly on the vehicle occupancy. The properties of transport modes on urban areas and on the long distance transport have been evaluated in this study. The energy consumption and environmental effects calculated per passenger mileage have been assessed for passenger car, bus, tram, train, airplane and ferry. The emissions have been evaluated during the whole fuel chain. In this study only the airborne emissions have been taken into account. In the energy consumption calculations the energy content of vehicles and the infrastructure, energy consumption during the fuel chain and during the end use have been taken into consideration. (au)

[Comfort of crew and passengers and atmospheric pressure, noise, wind speed in high-speed train of Shijiazhuang-Taiyuan passenger dedicated line].

Science.gov (United States)

Zhai, Yi-biao; Huo, Wei; Liu, Qiao-ying; Chen, Bao-shan; Zhang, Jin-long; Shi, Lei

2012-11-01

To explore the crew and passengers' comfort on the Shijiazhuang-Taiyuan passenger dedicated line and physical factors, such as air pressure, noise, wind speed. Comfort investigation of all the crew (n = 244) and passengers (n = 377) on the Shijiazhuang-Taiyuan passenger dedicated line at speed of 250 km/h and 200 km/h and the detection of the air pressure, noise and wind speed were performed in 2011. Significantly higher ratio of comfortable feeling, lower ratio of seriously discomfortable feeling were observed in crew and passengers at 200 km/h compared with those at 250 km/h (P noise in passengers at 200 km/h. No significant difference was observed in ear discomfort induced by air pressure and noise among crew, and the duration of disappearance of discomfortable feeling among passengers between 200 km/h and 250 km/h. The noise in carriages exceeded the related standard when the high-speed train passing through the tunnels. The individuals feel more comfortable at 200 km/h than 250 km/h in this line., which may be related with rapid variation of wind speed and noise when the train passes through the tunnels with high speed.

English Communication Problems and Needs From Social Engagement Perspective as Experienced by Airport Passenger-Handlers

OpenAIRE

Cahyani, Anisa Putri; Drajati, Nur Arifah

2017-01-01

Airport and airlines service demand qualified employees to have proficient English communication skill to support smooth flow of airport and flights operation, primarily the workers involved in passenger-handling. English for Specific Purpose (ESP) course which fulfills the target needs could help such situation. This small scale study presents stakeholders' comments about the staffs' English communication ability and needs in the work setting (data collected through semi-structured interview...

Strategy for Alternative Occupant Volume Testing

Science.gov (United States)

2009-10-20

This paper describes plans for a series of quasi-static : compression tests of rail passenger equipment. These tests are : designed to evaluate the strength of the occupant volume under : static loading conditions. The research plan includes a detail...

Energy Efficient and Environmentally Friendly Hybrid Conversion of Inland Passenger Vessel

Directory of Open Access Journals (Sweden)

Litwin Wojciech

2017-12-01

Full Text Available The development and growing availability of modern technologies, along with more and more severe environment protection standards which frequently take a form of legal regulations, are the reason why attempts are made to find a quiet and economical propulsion system not only for newly built watercraft units, but also for modernised ones. Correct selection of the propulsion and supply system for a given vessel affects significantly not only the energy efficiency of the propulsions system but also the environment - as this selection is crucial for the noise and exhaust emission levels. The paper presents results of experimental examination of ship power demand performed on a historic passenger ship of 25 m in length. Two variants, referred to as serial and parallel hybrid propulsion systems, were examined with respect to the maximum length of the single-day route covered by the ship. The recorded power demands and environmental impact were compared with those characteristic for the already installed conventional propulsion system. Taking into account a high safety level expected to be ensured on a passenger ship, the serial hybrid system was based on two electric motors working in parallel and supplied from two separate sets of batteries. This solution ensures higher reliability, along with relatively high energy efficiency. The results of the performed examination have revealed that the serial propulsion system is the least harmful to the environment, but its investment cost is the highest. In this context, the optimum solution for the ship owner seems to be a parallel hybrid system of diesel-electric type

Passenger safety, health, and comfort: a review.

Science.gov (United States)

Rayman, R B

1997-05-01

Since the birth of aviation medicine approximately 80 yrs ago, practitioners and scientists have given their attention primarily to flight deck crew, cabin crew, and ground support personnel. However, in more recent years we have broadened our horizons to include the safety, health, and comfort of passengers flying commercial aircraft. This will be even more compelling as more passengers take to the air in larger aircraft and flying longer hours to more distant destinations. Further, we can expect to see more older passengers because people in many countries are living longer, healthier lives. The author first discusses the stresses imposed by ordinary commercial flight upon travelers such as airport tumult, barometric pressure changes, immobility, jet lag, noise/ vibration, and radiation. Medical considerations are next addressed describing inflight illness and medical care capability aboard U.S. air carriers. Passenger safety, cabin air quality, and the preventive medicine aspects of air travel are next reviewed in the context of passenger safety, health, and comfort. Recommendations are addressed to regulator agencies, airlines aircraft manufacturers, and the aerospace medicine community.

Assessment of effects of maturity of Japan`s economy and society and improvement in automotive fuel consumption on demand for automotive fuels; Nippon keizai shakai no seijukuka to nenpi kaizen ga jidoshayo nenryo juyo ni ataeru eikyo hyoka

Energy Technology Data Exchange (ETDEWEB)

Shimomura, S. [The Institute of Energy Economics, Tokyo (Japan)

1998-04-01

This paper evaluates impacts of the maturity of Japan`s economy and society and the improvement in automotive fuel efficiency on the demand for automotive fuels by FY 2010. Standard case and lower order case were examined. When the traffic volume of passenger cars in FY 1995 is assumed to be 100, it become 121 and 119 in standard and lower order cases, respectively. The traffic volume of lorries become 106 and 102 in standard and lower order cases, respectively, which showed a rather small growth. Deterioration rate of the fuel consumption was estimated by considering the difference in fuel consumption of new cars and existing cars. Although the fuel consumption will be lowered by FY 2000 when the cassation rate of ordinary passenger cars will rapidly increase, the impact will be lowered after that. For lorries for commercial use, the running fuel consumption will be gradually lowered due to the increased carrying capacity and vehicle weight a lorry with improving the transportation efficiency. Decreased running speed by traffic jam is also a cause of the deterioration of fuel consumption. When a policy of improvement in the fuel consumption is promoted in a background of CO2 issues, the fuel consumption of each vehicle will be gradually improved. The peak of fuel demand will be in FY 2005 by considering the changes in economical and social structures and the improvement in fuel consumption for the environmental protection. 5 figs., 3 tabs.

Methods to estimate railway capacity and passenger delays

DEFF Research Database (Denmark)

Landex, Alex

that an evaluation of passenger delays obtained with simulation software (in this case RailSys) and the passenger delay model is comparable with the daily operation of the Copenhagen suburban railway network. Using a microscopic simulation model, the thesis demonstrates that it is possible to compare travel times...... of additional travel time. The differences between the different kinds of delay (train delays, passenger delays and scheduled waiting time) are illustrated through simple, but representative, case examples in CHAPTER 10. The examples demonstrate that 3rd generation passenger delay models are more realistic than...... depend on the given infrastructure and timetable and can result in longer travel times for trains and passengers. Furthermore, the thesis shows that the network effects can result in reduced capacity as some trains or train services can make it impossible to operate other planned/desired trains or train...

Individual Travel Behavior Modeling of Public Transport Passenger Based on Graph Construction

Directory of Open Access Journals (Sweden)

Quan Liang

2018-01-01

Full Text Available This paper presents a novel method for mining the individual travel behavior regularity of different public transport passengers through constructing travel behavior graph based model. The individual travel behavior graph is developed to represent spatial positions, time distributions, and travel routes and further forecasts the public transport passenger’s behavior choice. The proposed travel behavior graph is composed of macronodes, arcs, and transfer probability. Each macronode corresponds to a travel association map and represents a travel behavior. A travel association map also contains its own nodes. The nodes of a travel association map are created when the processed travel chain data shows significant change. Thus, each node of three layers represents a significant change of spatial travel positions, travel time, and routes, respectively. Since a travel association map represents a travel behavior, the graph can be considered a sequence of travel behaviors. Through integrating travel association map and calculating the probabilities of the arcs, it is possible to construct a unique travel behavior graph for each passenger. The data used in this study are multimode data matched by certain rules based on the data of public transport smart card transactions and network features. The case study results show that graph based method to model the individual travel behavior of public transport passengers is effective and feasible. Travel behavior graphs support customized public transport travel characteristics analysis and demand prediction.

Update on alternative occupant volume testing

Science.gov (United States)

2010-04-27

This paper describes the conduct of the first of a series of quasi-static compression tests of rail passenger equipment being done to examine occupant volume strength. Budd Pioneer car 244 has been chosen as the test article for examination of altern...

Stress analysis on passenger deck due to modification from passenger ship to vehicle-carrying ship

Science.gov (United States)

Zubaydi, A.; Sujiatanti, S. H.; Hariyanto, T. R.

2018-03-01

Stress is a basic concept in learning about material mechanism. The main focus that needs to be brought to attention in analyzing stress is strength, which is the structural capacity to carry or distribute loads. The structural capacity not only measured by comparing the maximum stress with the material’s yield strength but also with the permissible stress required by the Indonesian Classification Bureau (BKI), which certainly makes it much safer. This final project analyzes stress in passenger deck that experiences modification due to load changes, from passenger load to vehicle one, carrying: 6-wheels truck with maximum weight of 14 tons, a passenger car with maximum weight of 3.5 tons, and a motorcycle with maximum weight of 0.4 tons. The deck structure is modelled using finite element software. The boundary conditions given to the structural model are fix and simple constraint. The load that works on this deck is the deck load which comes from the vehicles on deck with three vehicles’ arrangement plans. After that, software modelling is conducted for analysis purpose. Analysis result shows a variation of maximum stress that occurs i.e. 135 N/mm2, 133 N/mm2, and 152 N/mm2. Those maximum stresses will not affect the structure of passenger deck’s because the maximum stress that occurs indicates smaller value compared to the Indonesian Classification Bureau’s permissible stress (175 N/mm2) as well as the material’s yield strength (235 N/mm2). Thus, the structural strength of passenger deck is shown to be capable of carrying the weight of vehicles in accordance with the three vehicles’ arrangement plans.

Cell dispensing in low-volume range with the immediate drop-on-demand technology (I-DOT).

Science.gov (United States)

Schober, Lena; Büttner, Evy; Laske, Christopher; Traube, Andrea; Brode, Tobias; Traube, Andreas Florian; Bauernhansl, Thomas

2015-04-01

Handling and dosing of cells comprise the most critical step in the microfabrication of cell-based assay systems for screening and toxicity testing. Therefore, the immediate drop-on-demand technology (I-DOT) was developed to provide a flexible noncontact liquid handling system enabling dispensing of cells and liquid without the risk of cross-contamination down to a precise volume in the nanoliter range. Liquid is dispensed from a source plate within nozzles at the bottom by a short compressed air pulse that is given through a quick release valve into the well, thus exceeding the capillary pressure in the nozzle. Droplets of a defined volume can be spotted directly onto microplates or other cell culture devices. We present a study on the performance and biological impact of this technology by applying the cell line MCF-7, human fibroblasts, and human mesenchymal stem cells (hMSCs). For all cell types tested, viability after dispensing is comparable to the control and exhibits similar proliferation rates in the absence of apoptotic cells, and the differentiation potential of hMSCs is not impaired. The immediate drop-on-demand technology enables accurate cell dosage and offers promising potential for single-cell applications. © 2014 Society for Laboratory Automation and Screening.

Rescheduling of Railway Rolling Stock with Dynamic Passenger Flows

NARCIS (Netherlands)

L.G. Kroon (Leo); G. Maróti (Gábor); L.K. Nielsen (Lars Kjaer)

2010-01-01

textabstractTraditional rolling stock rescheduling applications either treat passengers as static objects whose influence on the system is unchanged in a disrupted situation, or they treat passenger behavior as a given input. In case of disruptions however, we may expect the flow of passengers to

49 CFR 541.5 - Requirements for passenger motor vehicles.

Science.gov (United States)

2010-10-01

... TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION FEDERAL MOTOR VEHICLE THEFT PREVENTION STANDARD § 541.5 Requirements for passenger motor vehicles. (a) Each passenger motor vehicle subject to... 49 Transportation 6 2010-10-01 2010-10-01 false Requirements for passenger motor vehicles. 541.5...

Young drivers and their young passengers.

NARCIS (Netherlands)

2015-01-01

More than one-third of all fatalities among car passengers occurs in the 10-24-year age group. The majority of these young passengers die in a car driven by an 18 to 24-year old. Compared with the composition of the population, these are high proportions, yet the exposure (for example in distance

36 CFR 1005.4 - Commercial passenger-carrying motor vehicles.

Science.gov (United States)

2010-07-01

... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Commercial passenger-carrying motor vehicles. 1005.4 Section 1005.4 Parks, Forests, and Public Property PRESIDIO TRUST COMMERCIAL AND PRIVATE OPERATIONS § 1005.4 Commercial passenger-carrying motor vehicles. Passenger-carrying motor...

Intercity passenger rail : the congress faces critical decisions about the role of and funding for intercity passenger rail systems

Science.gov (United States)

2001-07-25

With the growth in the nation's highway and aviation systems in the : previous decades, intercity passenger rail service lost its competitive edge. Highways have enabled cars to be competitive with conventional passenger trains (those operating up to...

Alternative fuels from forest residues for passenger cars - an assessment under German framework conditions

OpenAIRE

Hurtig, O.; Leible, L.; Kälber, S.; Kappler, g.; Spicher, U.

2014-01-01

Background Due to the available volumes, biogenic residues are a promising resource for renewable fuels for passenger cars to reduce greenhouse gas (GHG) emissions. In this study, we compare three fuels from forest residues under German framework conditions: biogenic electricity, substitute natural gas (SNG), and Fischer-Tropsch (FT) diesel. Methods Fuels from forest residues are compared with regard to their technical efficiency (here defined as ‘pkm per kg b...

46 CFR 71.75-5 - Passenger Ship Safety Certificate.

Science.gov (United States)

2010-10-01

... 46 Shipping 3 2010-10-01 2010-10-01 false Passenger Ship Safety Certificate. 71.75-5 Section 71.75-5 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) PASSENGER VESSELS INSPECTION AND... Passenger Ship Safety Certificate. (a) All vessels on an international voyage are required to have a...

International Oil Supplies and Demands. Volume 1

Energy Technology Data Exchange (ETDEWEB)

1991-09-01

The eleventh Energy Modeling Forum (EMF) working group met four times over the 1989--90 period to compare alternative perspectives on international oil supplies and demands through 2010 and to discuss how alternative supply and demand trends influence the world`s dependence upon Middle Eastern oil. Proprietors of eleven economic models of the world oil market used their respective models to simulate a dozen scenarios using standardized assumptions. From its inception, the study was not designed to focus on the short-run impacts of disruptions on oil markets. Nor did the working group attempt to provide a forecast or just a single view of the likely future path for oil prices. The model results guided the group`s thinking about many important longer-run market relationships and helped to identify differences of opinion about future oil supplies, demands, and dependence.

International Oil Supplies and Demands. Volume 2

Energy Technology Data Exchange (ETDEWEB)

1992-04-01

The eleventh Energy Modeling Forum (EMF) working group met four times over the 1989--1990 period to compare alternative perspectives on international oil supplies and demands through 2010 and to discuss how alternative supply and demand trends influence the world`s dependence upon Middle Eastern oil. Proprietors of eleven economic models of the world oil market used their respective models to simulate a dozen scenarios using standardized assumptions. From its inception, the study was not designed to focus on the short-run impacts of disruptions on oil markets. Nor did the working group attempt to provide a forecast or just a single view of the likely future path for oil prices. The model results guided the group`s thinking about many important longer-run market relationships and helped to identify differences of opinion about future oil supplies, demands, and dependence.

Environmental Performance Evaluation of Ro-Ro Passenger Ferry Transportation

DEFF Research Database (Denmark)

Kristensen, Hans Otto Holmegaard; Hagemeister, Constantin

2012-01-01

/or emissions per transport unit, is related to the same unit for the different transport forms. For Ro-Ro passenger ferries it can be difficult to find a suitable common transport unit, as they often transport a mix of cargo, such as passengers, passenger cars, trucks, lorries, busses and other rolling...

Mortality of German travellers on passenger vessels.

Science.gov (United States)

Oldenburg, Marcus; Herzog, Jan; Püschel, Klaus; Harth, Volker

2016-01-01

In the past two decades, more and more Germans decided to spend their holidays on a passenger vessel. This study examined the frequencies and causes of deaths of German travellers aboard passenger vessels of all flags. The shipboard deaths of all German travellers within the time period from 1998 to 2008 were counted using the German civil central register in Berlin. The available documentation in this register provides information on frequencies, circumstances and causes of deaths on ships. In the above-mentioned period of time, the total cohort of German travellers on cruise ships is estimated to be 5.97 million persons. During the 11-year examination period, 135 shipboard deaths of German passengers [102 males (75.6%) and 33 females (24.4%)] were recorded. Out of these travellers, 110 died on cruise ships. When considering only the passengers on cruise ships (without those on ferries) an average crude mortality rate of 1.8 per 100,000 German passengers was calculated. The crude mortality rate of shipboard death for males and females was 2.5 and 0.8 per 100,000 German passengers with a mean age of 71.2 years [standard deviation (SD) 16.0 years] and 73.3 years (SD 16.0 years), respectively. Significantly, more deceased travellers older than 70 years were observed on traditional cruise ships and resort vessels than on passenger ferries (P = 0.001). The causes of death were documented in 85 cases (63.0%). Out of these documented deaths, 82 (96.5%) cases were regarded to be natural causes (particularly circulatory diseases) and 3 (3.5%) as unnatural causes (twice drowning and once an accidental fall). In spite of the large proportion of unknown causes of death, this study argues for a high significance of internal causes of deaths among German passengers. Thus, ship's doctors-particularly those on traditional cruise ships-should be well experienced in internal and geriatric medicines. © The Author 2016. Published by Oxford University Press on behalf of

Real-time passenger counting by active linear cameras

Science.gov (United States)

Khoudour, Louahdi; Duvieubourg, Luc; Deparis, Jean-Pierre

1996-03-01

The companies operating subways are very much concerned with counting the passengers traveling through their transport systems. One of the most widely used systems for counting passengers consists of a mechanical gate equipped with a counter. However, such simple systems are not able to count passengers jumping above the gates. Moreover, passengers carrying large luggage or bags may meet some difficulties when going through such gates. The ideal solution is a contact-free counting system that would bring more comfort of use for the passengers. For these reasons, we propose to use a video processing system instead of these mechanical gates. The optical sensors discussed in this paper offer several advantages including well defined detection areas, fast response time and reliable counting capability. A new technology has been developed and tested, based on linear cameras. Preliminary results show that this system is very efficient when the passengers crossing the optical gate are well separated. In other cases, such as in compact crowd conditions, reasonable accuracy has been demonstrated. These results are illustrated by means of a number of sequences shot in field conditions. It is our belief that more precise measurements could be achieved, in the case of compact crowd, by other algorithms and acquisition techniques of the line images that we are presently developing.

Carbon emissions from international cruise ship passengers' travel to and from New Zealand

Energy Technology Data Exchange (ETDEWEB)

Howitt, Oliver J.A.; Revol, Vincent G.N.; Smith, Inga J.; Rodger, Craig J. [Department of Physics, University of Otago, PO Box 56, Dunedin (New Zealand)

2010-05-15

Greenhouse gas emissions from international transport contribute to anthropogenic global warming, yet these emissions are not liable under the Kyoto Protocol. International attention is being given to quantifying such emissions. This paper presents the results of research into international cruise ship journeys to and from New Zealand. CO{sub 2} emissions from such journeys were calculated using an activity based, or 'bottom-up', model. Emissions factors for individual journeys by cruise ships to or from New Zealand in 2007 ranged between 250 and 2200 g of CO{sub 2} per passenger-kilometre (g CO{sub 2} per p-km), with a weighted mean of 390 g CO{sub 2} per p-km. The weighted mean energy use per passenger night for the 'hotel' function of these cruise vessels was estimated as 1600 MJ per visitor night, 12 times larger than the value for a land-based hotel. Using a simple price elasticities calculation, international cruise journeys for transport purposes were found to have a greater relative decrease in demand than plane journeys when the impact of carbon pricing was analysed. The potential to decrease the CO{sub 2} emissions per p-km was examined, and if passenger accommodation was compacted and some luxury amenities dispensed with values similar to those of economy-class air travel were obtained. (author)

The role of efficiency improvements vs. price effects for modeling passenger car transport demand and energy demand—Lessons from European countries

International Nuclear Information System (INIS)

Ajanovic, Amela; Haas, Reinhard

2012-01-01

The objective of this paper is to analyze the impact of changes in fuel prices and fuel intensity (i.e. liters of fuel used per 100 kilometers) on overall fuel (gasoline and diesel) consumption and on the demand for vehicle km driven in car passenger transport. This is important for deriving effective policy portfolios consisting of fuel taxes and technical standards such as fuel intensity mandates or specific CO 2 emission limits. To extract these impacts, we apply cointegration analyses to six European countries and their aggregate over the period 1970–2007. We consider the impact of fuel prices, household income and fuel intensity on fuel consumption. Furthermore, we investigate how changes in fuel prices and fuel intensity interact, analyzing the rebound effect due to lower fuel intensity and due to the switch to diesel. Because we find a high rebound effect with 44% more km driven if fuel intensity is improved 100%, the major conclusion of our analysis for policy makers is that technical standards as the only policy instrument will have limited success. Rather we recommend increased fuel taxes along with fuel intensity standards so that the taxes compensate for the rebound due to the standards. - Highlights: ► We find a high rebound effect with 44% more km driven if fuel intensity is improved. ► Technical standards as the only policy instrument will have limited success. ► Fuel taxes accompanied to fuel intensity standards may compensate the rebound effect.

14 CFR 135.113 - Passenger occupancy of pilot seat.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Passenger occupancy of pilot seat. 135.113... Operations § 135.113 Passenger occupancy of pilot seat. No certificate holder may operate an aircraft type certificated after October 15, 1971, that has a passenger seating configuration, excluding any pilot seat, of...

Estimates the Emission of Passenger Cars Based on the First Developed Driving Cycle in Nakhon Ratchasima Municipality, Thailand

Directory of Open Access Journals (Sweden)

Muangnak Noppatsorn

2017-01-01

Full Text Available This study aims to estimate emissions of passenger cars traveled on the highways in Nakhon Ratchasima Municipality (NRM based on recently developed driving cycles. A mobile phone application (SafeMate was used to record speed-time of passenger car on the highways both weekday and weekend. The results showed that the driving cycles of the passenger cars on highway 224 and 304 were quite different. More traffic congestion on highway 224 impacted the average speeds, ranging from 10 to 34 km/h with longer idling time. The average speeds on highway 304 ranged from 49 to 69 km/h with more cruise time. The combined driving cycles on both highways showed the average speeds of 20-40 km/h depending upon the time of days. The traffic density on weekday was higher than the weekend. Peak-hour weekday showed lower traffic flow than off-peak hour which was the opposite of the weekend. Based on the derived driving cycles, the passenger car traveled on the highways in NRM emitted CO, NOx and HC approximately 90.7-129.8, 25.5-34.5 and 6.9-11.7 tons/year, respectively. The passenger cars were estimated to emit about 13,927.7-20,419.3 tons/year of carbon dioxide on the highways. The highway 2 accounted more of the emissions due to the traffic volume and coverage distance in NRM.

Principles of Logistics Applied to Railway Passenger Transport

Directory of Open Access Journals (Sweden)

Vojtek Martin

2017-01-01

Full Text Available Main challenge of logistics is delivering right assortment of products in exact amount, to exact place, in exact time, ecologically and for exact price. Logistics deals with freight transport but when the word ‘products’ is changed to ‘passengers’, then many principles can be applied to passenger transport. Railway passenger transport is the key part of passenger transport system, so it is necessary to optimize it on logistics philosophy at first.

Alternative occupied volume integrity (OVI) tests and analyses.

Science.gov (United States)

2013-10-01

FRA, supported by the Volpe Center, conducted research on alternative methods of evaluating occupied volume integrity (OVI) in passenger railcars. Guided by this research, an alternative methodology for evaluating OVI that ensures an equivalent or gr...

Enabling technologies for demand management: Transport

International Nuclear Information System (INIS)

Smith, Roderick A.

2008-01-01

Rising transport demand is likely to be the biggest hurdle to reducing our greenhouse gas emissions. Globally and nationally, transport is consuming an ever increasing share of our total energy use. Furthermore, the bulk of energy used in transport comes from the burning of petroleum products. This brief paper summarises options arising from the two routes to reduce energy demand in transport: improved and more efficient use of existing and possible new transport modes, and the reduction of transport demand. In both areas, the prospects in the immediate and longer-term future are hedged with difficulties. Automobiles and aircraft have improved considerably in recent decades, but future improvements are likely to be incremental. The introduction of hydrogen as a fuel is appealing, but there are technical problems to be solved. Active reduction of demand for transport will require a decoupling of the link between demand and growth in gross domestic product. Globally, this will be very difficult to achieve. Various modes of public transport exist that are efficient in terms of their energy use per passenger kilometre. But they need large investments to make them more attractive than the automobile. However, population concentration in mega-cities, allied with congestion, will make such innovation essential. Policy measures can be assisted in their implementation by new technology, but will remain politically problematic

Delay Management with Re-Routing of Passengers

NARCIS (Netherlands)

T.A.B. Dollevoet (Twan); D. Huisman (Dennis); M.E. Schmidt (Marie); A. Schöbel (Anita)

2010-01-01

textabstractThe question of delay management is whether trains should wait for a delayed feeder train or should depart on time. In classical delay management models passengers always take their originally planned route. In this paper, we propose a model where re-routing of passengers is

Salmonella outbreak among railway and airline passengers.

Science.gov (United States)

Hatakka, M

1992-01-01

A widespread outbreak by Salmonella infantis, infecting a total of 226 people, occurred in Finland at the beginning of August 1986. Of those infected, 107 were railway passengers, 91 were airline passengers and 28 were employed in a food processing establishment. The outbreak among the railway passengers was caused by egg sandwiches, the airline passengers were infected by a meal served on board and the catering employees by the breakfast served in the establishment. The outbreak was caused by food prepared in the establishment's kitchen. The employees' breakfasts had probably been contaminated by an employee who was a symptom-free Salmonella infantis carrier, and a number of the employees subsequently became infected, leading to widespread contamination of the food prepared in the establishment. The spread of the outbreak was further influenced by a heatwave at the time and by shortcomings in the cold storage facilities. The kitchen's hygiene supervision and the quality control of its output were reorganized after the outbreak.

Study of LH2 fueled subsonic passenger transport aircraft

Science.gov (United States)

Brewer, G. D.; Morris, R. E.

1976-01-01

The potential of using liquid hydrogen as fuel in subsonic transport aircraft was investigated to explore an expanded matrix of passenger aircraft sizes. Aircraft capable of carrying 130 passengers 2,780 km (1500 n.mi.); 200 passengers 5,560 km (3000 n.mi.); and 400 passengers on a 9,265 km (5000 n.mi.) radius mission, were designed parametrically. Both liquid hydrogen and conventionally fueled versions were generated for each payload/range in order that comparisons could be made. Aircraft in each mission category were compared on the basis of weight, size, cost, energy utilization, and noise.

Research on the waiting time of passengers and escalator energy consumption at the railway station

Energy Technology Data Exchange (ETDEWEB)

Ma, Wei-wu; Liu, Xiao-yan; Li, Liqing; Shi, Xiangnan; Zhou, Chenn Q. [School of Energy Science and Engineering, Central South University, Changsha 410083 (China)

2009-12-15

Based on the Little Formula and the classical queuing model of multi-channel M vertical stroke D vertical stroke n, the relation of the average queue length, the maximum waiting time and the escalator service intensity were identified and the waiting time simulation model was established. With the passenger delivery data at A railway station in China and the probability distribution model of waiting time, a detailed analysis was made on the escalator allocation, power and energy consumption on holidays, ordinary working days and the largest-passengers-volume days; meanwhile, the fixed and variable energy consumption were compared and studied when the waiting time are 5, 10 and 30 s. The result shows that the waiting time settings affect the allocation and the energy consumption of the escalators and the fixed energy consumption takes 70%. (author)

Delay-based Passenger Car Equivalent at Signalized Intersections in Iran

Directory of Open Access Journals (Sweden)

Habibollah Nassiri

2017-04-01

Full Text Available Due to their different sizes and operational characteristics, vehicles other than passenger cars have a different influence on traffic operations especially at intersections. The passenger car equivalent (PCE is the parameter that shows how many passenger cars must be substituted for a specific heavy vehicle to represent its influence on traffic operation. PCE is commonly estimated using headway-based methods that consider the excess headway utilized by heavy vehicles. In this research, the PCE was estimated based on the delay parameter at three signalized intersections in Tehran, Iran. The data collected were traffic volume, travel time for each movement, signalization, and geometric design information. These data were analysed and three different models, one for each intersection, were constructed and calibrated using TRAF-NETSIM simulation software for unsaturated traffic conditions. PCE was estimated under different scenarios and the number of approach movements at each intersection. The results showed that for approaches with only one movement, PCE varies from 1.1 to 1.65. Similarly, for approaches with two and three movements, the PCE varies from 1.07 to 1.99 and from 0.76 to 3.6, respectively. In addition, a general model was developed for predicting PCE for intersections with all of the movements considered. The results obtained from this model showed that the average PCE of 1.5 is similar to the value recommended by the HCM (Highway Capacity Manual 1985. However, the predicted PCE value of 1.9 for saturated threshold is closer to the PCE value of 2 which was recommended by the HCM 2000 and HCM 2010.

75 FR 16552 - High-Speed Intercity Passenger Rail (HSIPR) Program

Science.gov (United States)

2010-04-01

...; Enhancing intercity travel options; Ensuring a state of good repair of key intercity passenger rail assets... DEPARTMENT OF TRANSPORTATION Federal Railroad Administration High-Speed Intercity Passenger Rail... selections for the High-Speed Intercity Passenger Rail (HSIPR) Program. This notice builds on the program...

Passengers, Crowding and Complexity : Models for passenger oriented public transport

NARCIS (Netherlands)

P.C. Bouman (Paul)

2017-01-01

markdownabstractPassengers, Crowding and Complexity was written as part of the Complexity in Public Transport (ComPuTr) project funded by the Netherlands Organisation for Scientific Research (NWO). This thesis studies in three parts how microscopic data can be used in models that have the potential

Passengers' attitudes and behaviour towards motorcycle helmet use ...

African Journals Online (AJOL)

Passengers' attitudes and behaviour towards motorcycle helmet use in Ilorin, ... Remember me ... The purpose of this study was to examine the attitudes, knowledge, and behavior of motorcycle passengers to helmet use in Ilorin metropolis, ...

The seated bus passenger--a review.

Science.gov (United States)

Levis, J A

1978-09-01

The paper describes the inter-relationship of anthropometry, rig studies and dynamic testing of aspects related to problems of the seated bus passenger. It seeks to draw together sub-sections of a very large study sponsored by the government through the Transport and Road Research Laboratory and undertaken by the Human Factors Group of Leyland Truck and Bus. It is relevant to all those designing passenger carrying transport systems.

Manikin families representing obese airline passengers in the US.

Science.gov (United States)

Park, Hanjun; Park, Woojin; Kim, Yongkang

2014-01-01

Aircraft passenger spaces designed without proper anthropometric analyses can create serious problems for obese passengers, including: possible denial of boarding, excessive body pressures and contact stresses, postural fixity and related health hazards, and increased risks of emergency evacuation failure. In order to help address the obese passenger's accommodation issues, this study developed male and female manikin families that represent obese US airline passengers. Anthropometric data of obese individuals obtained from the CAESAR anthropometric database were analyzed through PCA-based factor analyses. For each gender, a 99% enclosure cuboid was constructed, and a small set of manikins was defined on the basis of each enclosure cuboid. Digital human models (articulated human figures) representing the manikins were created using a human CAD software program. The manikin families were utilized to develop design recommendations for selected aircraft seat dimensions. The manikin families presented in this study would greatly facilitate anthropometrically accommodating large airline passengers.

Passenger vehicles that minimize the costs of ownership and environmental damages in the Indian market

International Nuclear Information System (INIS)

Gilmore, Elisabeth A.; Patwardhan, Anand

2016-01-01

Highlights: • Full costs (private and social) are evaluated for Indian passenger cars. • Diesel has low ownership costs, but higher climate and health damages. • Compressed natural gas cars have lower costs and damages than petrol cars. • Electric cars have higher damages due to electricity generation emissions. • CNG and less carbon intensive electricity minimizes Indian cars’ full cost. - Abstract: Rapid expansion of population and income growth in developing countries, such as India, is increasing the demand for many goods and services, including four-wheeled passenger cars. Passenger cars provide personal mobility; however, they also have negative implications for human wellbeing from increased air pollutants and greenhouse gases (GHG). Here, we evaluate the range of passenger vehicles available in the Indian market to identify options that minimize costs, human health effects and climate damages. Our approach is to compare alternative fuel/powertrain vehicles with similar conventional gasoline fueled vehicles and assess the differences in full (private and societal) costs for each pair. Private costs are the combination of capital costs and the discounted expected future fuel costs over the vehicle lifetime. The costs to human health from air quality are calculated using intake fractions to estimate exposure and literature values for the damage costs adjusted by benefits transfer methods. We use the Social Cost of Carbon to estimate climate damages. We find that, on average, the net present value (NPV) of the full costs of compressed natural gas (CNG) vehicles are lower than comparable gasoline vehicles, while, diesel vehicles have higher costs. Presently, electric vehicles have higher private costs (due to high capital costs) and societal costs (due to electricity generation emissions). Either a less carbon intensive electricity grid or an increase in the CNG fleet would minimize total costs, human health effects and GHG emissions from the

The Simultaneous Vehicle Scheduling and Passenger Service Problem

DEFF Research Database (Denmark)

Petersen, Hanne Løhmann; Larsen, Allan; Madsen, Oli B.G.

2013-01-01

, by modifying the timetable. The planning approach is referred to as the simultaneous vehicle scheduling and passenger service problem (SVSPSP). The SVSPSP is modelled as an integer programming problem and solved using a large neighborhood search metaheuristic. The proposed framework is tested on data inspired......Passengers using public transport systems often experience waiting times when transferring between two scheduled services. In this paper we propose a planning approach that seeks to obtain a favourable trade-off between the two contrasting objectives, passenger service and operating cost...

The Simultaneous Vehicle Scheduling and Passenger Service Problem

DEFF Research Database (Denmark)

Petersen, Hanne Løhmann; Larsen, Allan; Madsen, Oli B.G.

modifications of the timetable during the vehicle scheduling phase. This planning approach is referred to as the Simultaneous Vehicle Scheduling and Passenger Service Problem (SVSPSP). The SVSPSP is solved using a large neighbourhood search metaheuristic. The proposed framework is tested on data inspired......Passengers using public transport systems often experience waiting times when transferring between two scheduled services. We propose a planning approach which seeks to obtain a favorable trade-off between the conflicting objectives passenger service and operating cost, by allowing some moderate...

Radiation Exposure of Passengers to Cosmic Radiation

International Nuclear Information System (INIS)

Salah El-Din, T.; Gomaa, M.A.; Sallah, N.

2010-01-01

The main aim of the present study is to review exposure of Egyptian passengers and occupational workers to cosmic radiation during their work. Computed effective dose of passengers by computer code CARI-6 using during either short route, medium route or long route as well as recommended allowed number of flights per year

Econometric Forecasting Models for Air Traffic Passenger of Indonesia

Directory of Open Access Journals (Sweden)

Viktor Suryan

2017-01-01

Full Text Available One of the major benefits of the air transport services operating in bigger countries is the fact that they provide a vital social economic linkage. This study is an attempt to establish the determinants of the passenger air traffic in Indonesia. The main objective of the study is to determine the economic variables that affect the number of airline passengers using the econometrics model of projection with an emphasis on the use of panel data and to determine the economic variables that affect the number of airline passengers using the econometrics model of projection with an emphasis on the use of time series data. This research also predicts the upcoming number of air traffic passenger until 2030. Air transportation and the economic activity in a country are interdependent. This work first uses the data at the country level and then at the selected airport level for review. The methodology used in this study has adopted the study for both normal regression and panel data regression techniques. Once all these steps are performed, the final equation is taken up for the forecast of the passenger inflow data in the Indonesian airports. To forecast the same, the forecasted numbers of the GDP (Gross Domestic Product and population (independent variables were chosen as a part of the literature review exercise are used. The result of this study shows the GDP per capita have significant related to a number of passengers which the elasticity 2.23 (time-series data and 1.889 for panel data. The exchange rate variable is unrelated to a number of passengers as shown in the value of elasticity. In addition, the total of population gives small value for the elasticity. Moreover, the number of passengers is also affected by the dummy variable (deregulation. With three scenarios: low, medium and high for GDP per capita, the percentage of growth for total number of air traffic passenger from the year 2015 to 2030 is 199.3%, 205.7%, and 320.9% respectively.

Spanish version of Bus Drivers' Job Demands Scale (BDJD-24).

Science.gov (United States)

Boada-Grau, Joan; Prizmic-Kuzmica, Aldo-Javier; González-Fernández, Marcos-David; Vigil-Colet, Andreu

2013-01-01

Karasek and Theorell's Job Demands-Control Model argues that adverse health-related outcomes, both psychological and physiological, arise from a combination of high job demand and a low level of job control. The objective was to adapt Meijman and Kompier's Bus Drivers' Job Demands Scale (BDJD-24), which enables us to assess the job demands of bus drivers, to Spanish. The final version of the Spanish adaptation was applied to a sample made up of 287 bus drivers living in Spain (80.1% men and 19.9% women), whose average age was 40.44 (SD= 11.78). The results yielded a three-factor structure for the scale used: Time Pressure, Safety, and Passengers. These findings confirm that the Spanish version replicates the factor structure of the original English scale. The reliability of the three subscales was acceptable, ranging from .75 to .84. Furthermore, the subscales were also related to different external correlates and to other scales and showed good convergent and criterion validity. The present instrument can be used to evaluate job demands of bus drivers, as its psychometrics are substantially sound.

Do Convertible Bond Issuers Cater to Investor Demand?

NARCIS (Netherlands)

de Jong, Abe; Duca, Eric; Dutordoir, Marie

2013-01-01

We examine the impact of fluctuations in investor demand for convertible securities on convertible bond issue volumes, pricing, and design. We find evidence of a positive impact of investor demand proxies on convertible bond issue volumes. We also document significantly lower convertible bond

Gasoline demand in Europe. New insights

International Nuclear Information System (INIS)

Pock, Markus

2010-01-01

This study utilizes a panel data set from 14 European countries over the period 1990-2004 to estimate a dynamic model specification for gasoline demand. Previous studies estimating gasoline consumption per total passenger cars ignore the recent increase in the number of diesel cars in most European countries leading to biased elasticity estimates. We apply several common dynamic panel estimators to our small sample. Results show that specifications neglecting the share of diesel cars overestimate short-run income, price and car ownership elasticities. It appears that the results of standard pooled estimators are more reliable than common IV/GMM estimators applied to our small data set. (author)

Gasoline demand in Europe. New insights

Energy Technology Data Exchange (ETDEWEB)

Pock, Markus [Department of Economics and Finance, HealthEcon IHS - Institute for Advanced Studies, Vienna Stumpergasse 56, 1060 Vienna (Austria)

2010-01-15

This study utilizes a panel data set from 14 European countries over the period 1990-2004 to estimate a dynamic model specification for gasoline demand. Previous studies estimating gasoline consumption per total passenger cars ignore the recent increase in the number of diesel cars in most European countries leading to biased elasticity estimates. We apply several common dynamic panel estimators to our small sample. Results show that specifications neglecting the share of diesel cars overestimate short-run income, price and car ownership elasticities. It appears that the results of standard pooled estimators are more reliable than common IV/GMM estimators applied to our small data set. (author)

Designing Train Passenger Seat by Kansei Engineering in Indonesia

Directory of Open Access Journals (Sweden)

Hapsari Sakya Nabila

2017-01-01

Full Text Available Public transport adoption is still major problem in Indonesia. Integrating impression and emotion to service may change the image of public transport, leading to fast adoption rate. As product development technique, Kansei Engineering is well known to facilitate that integration. This paper communicates the implementation of Kansei Engineering (KE in designing train passenger seat in Indonesia. The train between Bandung-Solo (8 hours journey was chosen to be the investigated object. The train was selected to be refurbished by introducing a new passenger seat design, emphasizing on the improvement of passenger experience. As the first step of KE type I technique, travel experience of the existing passengers were taken into the consideration for selecting Kansei words. It was found that the relevant Kansei words to design passenger train seat in Indonesia were: comfort, people-friendly, multifunction, safe, soft, spacious, relaxing, superior, maintainable, strong, producible, minimalist, attractive, modern, unique, and durable. Upon understanding the semantic meaning of those words, physical properties and technical specification were produced by consulting to the related members. Finally, a passenger seat with synthetic leather cover, modular design, foldable table, individual power point, bluesilver color, and adjusted to Indonesian’s anthropometry data was proposed as the final design

High-Speed Train Stop-Schedule Optimization Based on Passenger Travel Convenience

OpenAIRE

Dingjun Chen; Shaoquan Ni; Chang’an Xu; Hongxia Lv; Simin Wang

2016-01-01

The stop-schedules for passenger trains are important to the operation planning of high-speed trains, and they decide the quality of passenger service and the transportation efficiency. This paper analyzes the specific manifestation of passenger travel convenience and proposes the concepts of interstation accessibility and degree of accessibility. In consideration of both the economic benefits of railway corporations and the travel convenience of passengers, a multitarget optimization model i...

Airline Passengers

OpenAIRE

Wittmer, Andreas; Hinnen, Gieri

2016-01-01

Airlines create value for employees, investors, governments, customers and consumers. This chapter focuses on the customers and consumers of the airline product. Airline customers, who include passengers and corporate travel providers, exert considerable market power in the air transport industry through their purchasing decisions and travel behaviour. As a purchaser of a commercial aviation product, customers are responsible for stimulating product and service innovation and their behaviour ...

Demand outlook for jet fuel in Brazil; Perspectivas da demanda de querosene de aviacao (QAV) no Brasil

Energy Technology Data Exchange (ETDEWEB)

Saide, Clara Santos Martins; Aragao, Amanda P.; Machado, Giovani V.; Cavalcanti, Marcelo C.B.; Valle, Ricardo Nascimento e Silva do [Empresa de Pesquisa Energetica (EPE), Rio de Janeiro, RJ (Brazil)

2012-07-01

The purpose of this study is to forecast the demand for jet fuel for the next years, by applying aggregate models. The relevance of this issue is evidenced by the strong growth of air transport in recent years and the growth prospects of the sector, especially regarding the evolution of the use of this modal in middle-income population classes, since the number of trips per capita in Brazil is still much lower than in developed countries. The key variables in the models' specifications proposed in this study are: Brazil's GDP, the activity level of the sector (measured in passenger-kilometers and ton-kilometers, respectively, for air transport of passengers and cargo) and energy intensity. Findings show that the demand for jet fuel is expected to grow by an average of 6-8% per year until 2020, under the assumptions of an average GDP growth of 4.7% per year and energy efficiency gains of 1% per year. (author)

Getting Frustrated: Modelling Emotion Contagion in Stranded Passengers

NARCIS (Netherlands)

van der Wal, C. Natalie; Couwenberg, Maik; Bosse, T.

2017-01-01

Train passengers can get stranded due to a variety of events, such as a delay, technical malfunctioning or a natural disaster. Stranded passengers can get frustrated, which could escalate in misbehaviours. Examples are verbal and physical violence or dangerous behaviours such as opening emergency

Simulation-Based Dynamic Passenger Flow Assignment Modelling for a Schedule-Based Transit Network

Directory of Open Access Journals (Sweden)

Xiangming Yao

2017-01-01

Full Text Available The online operation management and the offline policy evaluation in complex transit networks require an effective dynamic traffic assignment (DTA method that can capture the temporal-spatial nature of traffic flows. The objective of this work is to propose a simulation-based dynamic passenger assignment framework and models for such applications in the context of schedule-based rail transit systems. In the simulation framework, travellers are regarded as individual agents who are able to obtain complete information on the current traffic conditions. A combined route selection model integrated with pretrip route selection and entrip route switch is established for achieving the dynamic network flow equilibrium status. The train agent is operated strictly with the timetable and its capacity limitation is considered. A continuous time-driven simulator based on the proposed framework and models is developed, whose performance is illustrated through a large-scale network of Beijing subway. The results indicate that more than 0.8 million individual passengers and thousands of trains can be simulated simultaneously at a speed ten times faster than real time. This study provides an efficient approach to analyze the dynamic demand-supply relationship for large schedule-based transit networks.

Diarrhea and related factors among passengers on world cruises departing from Japan.

Science.gov (United States)

Yamakawa, Michiyo; Sasai, Megumi; Kasai, Yosuke; Tsuda, Toshihide; Suzuki, Etsuji

2018-01-25

Despite growth in the number of cruises worldwide, evidence about diarrhea experienced by cruise ship passengers remains sparse. We investigated rates of diarrhea and related factors among passengers on world cruises departing from Japan. Targeting passengers on five world cruises (n = 4180) from 2012 to 2013 (85-103 travel days), we calculated rates of health seeking behavior for diarrhea by sex, age group, and number of roommates for each cruise. We estimated rate ratios and 95% confidence intervals, using the group aged 20-39 years, women, and 2-4 roommates as referent categories. We found 5.04-6.00 cases per 10,000 person-days in the five cruises, with an elevated number after calling at ports. Older passengers (>60 years) and passengers with fewer roommates had an elevated risk of health seeking behavior for diarrhea, although passengers aged 60 years and without roommates. Older passengers and passengers with fewer roommates may be more likely to seek medical treatment for diarrhea during travel on a world cruise, and should take preventive measures. Copyright © 2018. Published by Elsevier Ltd.

Methods for analysis of passenger trip performance in a complex networked transportation system

Science.gov (United States)

Wang, Danyi

2007-12-01

The purpose of the Air Transportation System (ATS) is to provide safe and efficient transportation service of passengers and cargo. The on-time performance of a passenger's trip is a critical performance measurement of the Quality of Service (QOS) provided by any Air Transportation System. QOS has been correlated with airline profitability, productivity, customer loyalty and customer satisfaction (Heskett et al. 1994). Btatu and Barnhart have shown that official government and airline on-time performance metrics (i.e. flight-centric measures of air transportation) fail to accurately reflect the passenger experience (Btatu and Barnhart, 2005). Flight-based metrics do not include the trip delays accrued by passengers who were re-booked due to cancelled flights or missed connections. Also, flight-based metrics do not quantify the magnitude of the delay (only the likelihood) and thus fails to provide the consumer with a useful assessment of the impact of a delay. Passenger-centric metrics have not been developed because of the unavailability of airline proprietary data, which is also protected by anti-trust collusion concerns and civil liberty privacy restrictions. Moveover, the growth of the ATS is trending out of the historical range. The objectives of this research were to (1) estimate ATS-wide passenger trip delay using publicly accessible flight data, and (2) investigate passenger trip dynamics out of the range of historical data by building a passenger flow simulation model to predict impact on passenger trip time given anticipated changes in the future. The first objective enables researchers to conduct historical analysis on passenger on-time performance without proprietary itinerary data, and the second objective enables researchers to conduct experiments outside the range of historic data. The estimated passenger trip delay was for 1,030 routes between the 35 busiest airports in the United States in 2006. The major findings of this research are listed as

Cooling performance and evaluation of automotive refrigeration system for a passenger car

Science.gov (United States)

Prajitno, Deendarlianto, Majid, Akmal Irfan; Mardani, Mahardeka Dhias; Wicaksono, Wendi; Kamal, Samsul; Purwanto, Teguh Pudji; Fauzun

2016-06-01

A new design of automotive refrigeration system for a passenger car was proposed. To ensure less energy consumption and optimal thermal comfort, the performance of the system were evaluated. This current research was aimed to evaluate the refrigeration characteristics of the system for several types of cooling load. In this present study, a four-passenger wagon car with 1500 cc gasoline engine that equipped by a belt driven compressor (BDC) was used as the tested vehicle. To represent the tropical condition, a set of lamps and wind sources are installed around the vehicle. The blower capacity inside a car is varied from 0.015 m/s to 0.027 m/s and the compressor speed is varied at variable 820, 1400, and 2100 rpm at a set temperature of 22°C. A set of thermocouples that combined by data logger were used to measure the temperature distribution. The system uses R-134a as the refrigerant. In order to determine the cooling capacity of the vehicle, two conditions were presented: without passengers and full load conditions. As the results, cooling capacity from any possible heating sources and transient characteristics of temperature in both systems for the cabin, engine, compressor, and condenser are presented in this work. As the load increases, the outlet temperature of evaporator also increases due to the increase of condensed air. This phenomenon also causes the increase of compressor work and compression ratio which associated to the addition of specific volume in compressor inlet.

Oil substitution and energy conservation in passenger transport - by the use of electric multiple units

Energy Technology Data Exchange (ETDEWEB)

Padiyar, K P

1983-11-01

India's National Transport Policy of accelerating the electrification of railways to a target of 1000 route kilometers per year and phasing out diesel engines is justified because of indigenous coal for power generation and the flexibility and better performance of electric equipment. This article examines the growth of passenger traffic and the corresponding decline in rail's share of that traffic since 1950 to illustrate the urgency of pursuing rail electrification. Traffic forecasts through the year 2000 emphasize that railway capacity is not keeping pace with demand, which results in discouraging public use. 8 tables. (DCK)

Ejection of a rear facing, golf cart passenger.

Science.gov (United States)

Schau, Kyle; Masory, Oren

2013-10-01

The following report details the findings of a series of experiments and simulations performed on a commercially available, shuttle style golf cart during several maneuvers involving rapid accelerations of the vehicle. It is determined that the current set of passive restraints on these types of golf carts are not adequate in preventing ejection of a rear facing passenger during rapid accelerations in the forward and lateral directions. Experimental data and simulations show that a hip restraint must be a minimum of 13 in. above the seat in order to secure a rear facing passenger during sharp turns, compared to the current restraint height of 5 in. Furthermore, it is determined that a restraint directly in front of the rear facing passenger is necessary to prevent ejection. In addressing these issues, golf cart manufacturers could greatly reduce the likelihood of injury due to ejection of a rear facing, golf cart passenger. Copyright © 2013 Elsevier Ltd. All rights reserved.

Ghana Journal of Development Studies, Volume 7, Number 2

African Journals Online (AJOL)

UDS-CAPTURED

Ghana Journal of Development Studies, Volume 7, Number 2 2010. 53 ... The use of motorcycles for urban passenger transport in Nigeria popularly called okada is a source of ..... Gap in Mexico Washington, DC: The World Bank. Becker, S. G. ...

A Model of Bus Bunching under Reliability-based Passenger Arrival Patterns

OpenAIRE

Fonzone, Achille; Schmöcker, Jan-Dirk; Liu, Ronghui

2015-01-01

If bus service departure times are not completely unknown to the passengers, non-uniform passenger arrival patterns can be expected. We propose that passengers decide their arrival time at stops based on a continuous logit model that considers the risk of missing services. Expected passenger waiting times are derived in a bus system that allows also for overtaking between bus services. We then propose an algorithm to derive the dwell time of subsequent buses serving a stop in order to illustr...

49 CFR 583.10 - Outside suppliers of passenger motor vehicle equipment.

Science.gov (United States)

2010-10-01

... 49 Transportation 7 2010-10-01 2010-10-01 false Outside suppliers of passenger motor vehicle... CONTENT LABELING § 583.10 Outside suppliers of passenger motor vehicle equipment. (a) For each unique type of passenger motor vehicle equipment for which a manufacturer or allied supplier requests information...

The Research of China's Civil Aviation Passenger Multi-Channel Service Technology Platform

Science.gov (United States)

Zhibing, Xue; Xinming, Wang

IATA is promoting Simplifying the Business. The traditional passenger services and business process, such as ticketing, airport counters, had a great influence. The airlines have the passenger service and convenience as the next product development requirements. With civil aviation industry and their company's products construction, the authors propose a solution of passenger multi-channel service product platform. The solution is to streamline the business as the breakthrough point, around the convenience of passengers travel services to travelers as the center, using the current mainstream and the latest IT technology to establish passenger service product platform. The solution will promote DCS e-ticketing business development and service channel diversity. In this paper, the research results have been applied in the product platform construction of the authors' company. The practice shows that through traditional business with the latest IT technologies, traditional passenger services into the emerging service model, passenger service product platform has strong advantages and characteristics. Based on the platform, various types of service products is growing rapidly.

46 CFR 176.910 - Passenger Ship Safety Certificate.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Passenger Ship Safety Certificate. 176.910 Section 176... 100 GROSS TONS) INSPECTION AND CERTIFICATION International Convention for Safety of Life at Sea, 1974, as Amended (SOLAS) § 176.910 Passenger Ship Safety Certificate. (a) A vessel, which carries more than...

36 CFR 13.1316 - Commercial transport of passengers by motor vehicles.

Science.gov (United States)

2010-07-01

... passengers by motor vehicles. 13.1316 Section 13.1316 Parks, Forests, and Public Property NATIONAL PARK... National Park General Provisions § 13.1316 Commercial transport of passengers by motor vehicles. Commercial transport of passengers by motor vehicles on Exit Glacier Road is allowed without a written permit. However...

49 CFR 583.11 - Allied suppliers of passenger motor vehicle equipment.

Science.gov (United States)

2010-10-01

... 49 Transportation 7 2010-10-01 2010-10-01 false Allied suppliers of passenger motor vehicle... CONTENT LABELING § 583.11 Allied suppliers of passenger motor vehicle equipment. (a) For each unique type of passenger motor vehicle equipment which an allied supplier supplies to the manufacturer with which...

Human Factors Engineering in Designing the Passengers' Cockpit of the Malaysian Commercial Suborbital Spaceplane

Science.gov (United States)

Ridzuan Zakaria, Norul; Mettauer, Adrian; Abu, Jalaluddin; Hassan, Mohd Roshdi; Ismail, Anwar Taufeek; Othman, Jamaluddin; Shaari, Che Zhuhaida; Nasron, Nasri

2010-09-01

The design of the passengers’ cabin or cockpit of commercial suborbital spaceplane is a new and exciting frontier in human factors engineering, which emphasizes on comfort and safety. There is a program to develop small piloted 3 seats commercial suborbital spaceplane by a group of Malaysians with their foreign partners, and being relatively small and due to its design philosophy, the spaceplane does not require a cabin, but only a cockpit for its 2 passengers. In designing the cockpit, human factors engineering and safety principles are given priority. The cockpit is designed with the intention to provide comfort and satisfaction to the passengers without compromising the safety, in such a way that there are passenger-view wide angled video camera to observe the passengers at all time in flight, “rear-view”, “under-the-floor-view” and “fuselage-view” video cameras for the passengers, personalized gauges and LCDs on the dashboard to provide vital and useful information during the flight to the passengers, and biomedical engineered products which not only entertain the passengers, but also provide important information on the passengers to the ground crews who are responsible in the comfort and safety of the passengers. The passenger-view video-camera, which record the passengers with Earth visible through the glass canopy as the background, not only provides live visual of the passengers for safety reason, but also provide the most preferred memorable video collection for the passengers, while other video cameras provide the opportunity to view at various angles from unique positions to both the passengers and the ground observers. The gauges and LCDs on the dashboard provide access to the passengers to information such as the gravity, orientation, rate of climb and flight profile of the spaceplane, graphical presentation of the spaceplane in flight, and live video from the onboard video cameras. There is also a control stick for each passenger to

Applied Two-Class Overbooking Model in Thailand's Passenger Airline Data

Directory of Open Access Journals (Sweden)

Murati Somboon

2017-12-01

Full Text Available In this study, a mathematical model, which combines two of the most important airline revenue management strategies, namely overbooking and seat inventory control, is applied in Thailand's passenger airline data. Using this model, it is possible to find a closed-form solution for both the optimal booking limit and the optimal overbooking limit, simultaneously. Numerical study was set to evaluate the performance of the two-class overbooking model and to test three hypotheses using real-life data. Our two-class overbooking model outperformed the fixed-booking limit policy. Moreover, three hypotheses: the effect of varying the number of update booking limit points, the effect of an incorrect initial mean for demand, and the effect of a number of smoothing constants on an exponential smoothing method were tested using real-life data. At the 0.05 significance level, it was found that different numbers of update booking limit points affected profit, incorrect initial mean for demand did not affect profit when a high number of update booking limit points was set, and all of the smoothing constants in exponential smoothing method affected profit to some extent.

78 FR 51812 - Urbanized Area Formula Grants; Passenger Ferry Grant Program

Science.gov (United States)

2013-08-21

... authorized by the Moving Ahead for Progress in the 21st Century Act (MAP-21), Public Law 112- 141, July 6... accommodate walk-on passengers. 2. Eligible Projects Under this competitive program, eligible projects are... the number of trips (passengers and vehicles), the number of walk-on passengers, and transfers to...

Modeling real-world fuel consumption and carbon dioxide emissions with high resolution for light-duty passenger vehicles in a traffic populated city

International Nuclear Information System (INIS)

Zhang, Shaojun; Wu, Ye; Un, Puikei; Fu, Lixin; Hao, Jiming

2016-01-01

Modeling fuel consumption of light-duty passenger vehicles has created substantial concerns due to the uncertainty from real-world operating conditions. Macao is world-renowned for its tourism industry and high population density. An empirical model is developed to estimate real-world fuel consumption and carbon dioxide emissions for gasoline-powered light-duty passenger vehicles in Macao by considering local fleet configuration and operating conditions. Thanks to increasingly stringent fuel consumption limits in vehicle manufacturing countries, estimated type-approval fuel consumption for light-duty passenger vehicles in Macao by model year was reduced from 7.4 L/100 km in 1995 to 5.9 L/100 km in 2012, although a significant upsizing trend has considerably offset potential energy-saving benefit. However, lower driving speed and the air-conditioning usage tend to raise fleet-average fuel consumption and carbon dioxide emission factors, which are estimated to be 10.1 L/100 km and 240 g/km in 2010. Fleet-total fuel consumption and carbon dioxide emissions are modeled through registered vehicle population-based and link-level traffic demand approaches and the results satisfactorily coincide with the historical record of fuel sales in Macao. Temporal and spatial variations in fuel consumption and carbon dioxide emissions from light-duty passenger vehicles further highlight the importance of effective traffic management in congested areas of Macao. - Highlights: • A fuel consumption model is developed for Macao's light-duty passenger cars. • Increased vehicle size partially offset energy benefit from tightened fuel consumption standard. • Lower speed and use of air-conditioning greatly increase fuel use of Macao light-duty passenger cars. • A high resolution inventory of fuel use and carbon dioxide emissions is built with link-level traffic data. • Policy suggestions are provided to mitigate fuel use in a traffic populated city.

Research on the compressive strength of a passenger vehicle roof

Science.gov (United States)

Zhao, Guanglei; Cao, Jianxiao; Liu, Tao; Yang, Na; Zhao, Hongguang

2017-05-01

To study the compressive strength of a passenger vehicle roof, this paper makes the simulation test on the static collapse of the passenger vehicle roof and analyzes the stress and deformation of the vehicle roof under pressure in accordance with the Roof Crush Resistance of Passenger Cars (GB26134-2010). It studies the optimization on the major stressed parts, pillar A, pillar B and the rail of roof, during the static collapse process of passenger vehicle roof. The result shows that the thickness of pillar A and the roof rail has significant influence on the compressive strength of the roof while that of pillar B has minor influence on the compressive strength of the roof.

CFD Investigation on Long-Haul Passenger Bus

Science.gov (United States)

Tan, C. F.; Tee, B. T.; Law, H. C.; Lim, T. L.

2015-09-01

Air flow distribution is one of the important factors that will influence the bus passenger comfort during long haul travel. Poor air flow distribution not only cause discomfort to the bus passenger but also influence their travel mode as well. The main purpose of this study is to investigate the air flow performance of the bus air-conditioning system through CFD simulation approach. A 3D CAD model of air ducts was drawn and hence analysed by using CFD software, namely ANSYS Fluent, to determine the airflow rate for every outlets of the air-conditioning system. The simulated result was then validated with experimental data obtained from prototype model of air duct. Based on the findings, new design concepts is proposed with the aim to meet the industry requirement as well as to improve the bus passenger comfort during long haul travel.

APPLICATION OF NFC TECHNOLOGY IN PASSENGER RAIL TRANSPORT

Directory of Open Access Journals (Sweden)

Henryk KOMSTA

2016-09-01

Full Text Available The article discusses the possibility of the application of the NFC technology as a system of selling tickets in passenger rail transport. The NFC (Near Field Communication technology is a wireless and contactless technology of transmission of radio data over short distances (max. 5 cm. This technology is very similar to the RFID (Radio Frequency Identification technology. It is assumed that this technology will spread rapidly and that already in 2015 around 85% of the payments in the EU will be made via mobile phones. This paper presents a research of passenger interest in this method of payment for tickets in the passenger rail transport in Slovakia. Further, an analysis of the applications of the NFC technology as a system of selling tickets in passenger rail transport, including the protection of data in mobile phones, the processes in case of losing a mobile phone and ensuring the communication between both parties was presented in the article. The last part of this analysis shows the possibility of purchasing tickets regardless of the carrier and the transport type.

THE PROBLEMS OF PASSENGER TRANSPORTATIONS IN AN INTERNATIONAL COMMUNICATION

Directory of Open Access Journals (Sweden)

Yu. S. Barash

2010-05-01

Full Text Available The basic aspects of international passenger transportations in Ukraine are represented. The analysis of present situation in these transportations is carried out. Some variants of solving the problems of passenger transportations in an international communication are considered.

Integrating passenger and freight transportation : model formulation and insights

NARCIS (Netherlands)

Ghilas, V.; Demir, E.; Woensel, van T.

2013-01-01

Integrating passenger and freight ows creates attractive business opportunities because the same transportation needs can be met with fewer vehicles and emissions. This paper seeks an integrated solution for the transportation of passenger and freight simultaneously, so that fewer vehicles are

Child Passenger Safety (A Cup of Health with CDC)

Centers for Disease Control (CDC) Podcasts

Proper installation and use of car seats and booster seats for child passengers can save their lives. CDC recommends drivers ensure children are always buckled up. In this podcast, Bethany West discusses how to keep young passengers as safe as possible.

Spatial-Temporal Similarity Correlation between Public Transit Passengers Using Smart Card Data

Directory of Open Access Journals (Sweden)

Hamed Faroqi

2017-01-01

Full Text Available The increasing availability of public transit smart card data has enabled several studies to focus on identifying passengers with similar spatial and/or temporal trip characteristics. However, this paper goes one step further by investigating the relationship between passengers’ spatial and temporal characteristics. For the first time, this paper investigates the correlation of the spatial similarity with the temporal similarity between public transit passengers by developing spatial similarity and temporal similarity measures for the public transit network with a novel passenger-based perspective. The perspective considers the passengers as agents who can make multiple trips in the network. The spatial similarity measure takes into account direction as well as the distance between the trips of the passengers. The temporal similarity measure considers both the boarding and alighting time in a continuous linear space. The spatial-temporal similarity correlation between passengers is analysed using histograms, Pearson correlation coefficients, and hexagonal binning. Also, relations between the spatial and temporal similarity values with the trip time and length are examined. The proposed methodology is implemented for four-day smart card data including 80,000 passengers in Brisbane, Australia. The results show a nonlinear spatial-temporal similarity correlation among the passengers.

The Hybrid Airline Model. Generating Quality for Passengers

Directory of Open Access Journals (Sweden)

Bogdan AVRAM

2017-12-01

Full Text Available This research aims to investigate the different strategies adopted by the airline companies in adapting to the ongoing changes while developing products and services for passengers in order to increase their yield, load factor and passenger satisfaction. Finding a balance between costs and services quality in the airline industry is a crucial task for every airline wanting to gain a competitive advantage on the market. Also, the rise of the hybrid business operating model has brought up many challenges for airlines as the line between legacy carriers and low-cost carriers is getting thinner in terms of costs and innovative ideas to create a superior product for the passengers.

Air pollution co-benefits of low carbon policies in road transport: a sub-national assessment for India

Science.gov (United States)

Mittal, Shivika; Hanaoka, Tatsuya; Shukla, Priyadarshi R.; Masui, Toshihiko

2015-08-01

This letter assesses low carbon scenarios for India at the subnational level in the passenger road transport sector. We estimate the future passenger mobility demand and assess the impact of carbon mitigation policies using the Asia-Pacific Integrated Assessment/Enduse models. This letter focuses on the transitions of energy and emissions of passenger transport in India in alternate scenarios i.e. the business-as-usual scenario and a low carbon scenario that aligns to the 2 °C temperature stabilization target agreed under the global climate change negotiations. The modelling results show that passenger mobility demand will rise in all sub-national regions of India in the coming few decades. However, the volume and modal structure will vary across regions. Modelling assessment results show that aligning global low carbon policies with local policies has potential to deliver significant air quality co-benefits. This analysis provides insights into the comparative dynamics of environmental policymaking at sub-national levels.

Air pollution co-benefits of low carbon policies in road transport: a sub-national assessment for India

International Nuclear Information System (INIS)

Mittal, Shivika; Hanaoka, Tatsuya; Masui, Toshihiko; Shukla, Priyadarshi R

2015-01-01

This letter assesses low carbon scenarios for India at the subnational level in the passenger road transport sector. We estimate the future passenger mobility demand and assess the impact of carbon mitigation policies using the Asia–Pacific Integrated Assessment/Enduse models. This letter focuses on the transitions of energy and emissions of passenger transport in India in alternate scenarios i.e. the business-as-usual scenario and a low carbon scenario that aligns to the 2 °C temperature stabilization target agreed under the global climate change negotiations. The modelling results show that passenger mobility demand will rise in all sub-national regions of India in the coming few decades. However, the volume and modal structure will vary across regions. Modelling assessment results show that aligning global low carbon policies with local policies has potential to deliver significant air quality co-benefits. This analysis provides insights into the comparative dynamics of environmental policymaking at sub-national levels. (letter)

Bus-stop Based Real Time Passenger Information System - Case Study Maribor

Science.gov (United States)

Čelan, Marko; Klemenčič, Mitja; Mrgole, Anamarija L.; Lep, Marjan

2017-10-01

Real time passenger information system is one of the key element of promoting public transport. For the successful implementation of real time passenger information systems, various components should be considered, such as: passenger needs and requirements, stakeholder involvement, technological solution for tracking, data transfer, etc. This article carrying out designing and evaluation of real time passenger information (RTPI) in the city of Maribor. The design phase included development of methodology for selection of appropriate macro and micro location of the real-time panel, development of a real-time passenger algorithm, definition of a technical specification, financial issues and time frame. The evaluation shows that different people have different requirements; therefore, the system should be adaptable to be used by various types of people, according to the age, the purpose of journey, experience of using public transport, etc. The average difference between perceived waiting time for a bus is 35% higher than the actual waiting time and grow with the headway increase. Experiences from Maribor have shown that the reliability of real time passenger system (from technical point of view) must be close to 100%, otherwise the system may have negative impact on passengers and may discourage the use of public transport. Among considered events of arrivals during the test period, 92% of all prediction were accurate. The cost benefit analysis has focused only on potential benefits from reduced perceived users waiting time and foreseen costs of real time information system in Maribor for 10 years’ period. Analysis shows that the optimal number for implementing real time passenger information system at the bus stops in Maribor is set on 83 bus stops (approx. 20 %) with the highest number of passenger. If we consider all entries at the chosen bus stops, the total perceived waiting time on yearly level could be decreased by about 60,000 hours.

Passenger car fuel consumption survey

Energy Technology Data Exchange (ETDEWEB)

1984-03-01

This survey originated from a proposal to monitor the fuel consumption and fuel economy of personal use passenger cars operated in Canada. Its purpose is to establish a data base which would contain information on total distance travelled, total amount of fuel consumed, average distance obtained per unit of fuel, total expenditures on fuel, and seasonal fluctuations in fuel consumption and in distance travelled. Among the needs served by this data base are the monitoring of passenger car fuel economy standards and the estimation of pasenger car fuel requirements in conditions involving fuel shortages. Survey methodology is by telephone interview to trace selected vehicles to the registered owners, at which time a fuel purchase diary is then mailed to the principal driver of the car. The results are tabulated on a quarterly basis and to be released as they become available in bulletins similar to this. Data are presented for each province and the total for Canada is given. During the fourth quarter of 1982, it is estimated that there were 7.3 million personal use passenger cars operated in Canada. These cars were driven 28 billion kilometers and consumed 4.3 billion litres of fuel. Their average litres/100 kilometres and the average fuel consumption was 590 litres. 8 tabs.

Weasel works SA-150: Design study of a 100 to 150 passenger transport aircraft

Science.gov (United States)

Alkema, Kevin; Comeaux, Michael; Gilbert, Timothy; Para, Victor; Toepfer, George

1993-01-01

As the year 2000 rapidly approaches, the airlines are faced with an extremely competitive and environmentally restrictive marketplace. In order to survive, commercial air carriers will need to find new ways to lower their direct operating costs, increase load factors and comply with tightening federal and international constraints. The SA-150 has been designed to meet these demands by focusing on the areas of aerodynamic efficiency, an improved level of passenger comfort, and a limited application of advanced technology. The SA-150 has been optimized for a 500 nmi. mission to help the airlines meet the challenges of the short haul, quick turnaround flight. With a maximum capacity of 124 passengers, and full baggage, the SA-150 is also capable of covering a range of 1500 nmi. This additional range capability will provide the airlines with flexibility when scheduling their routes. The aircraft features a 'V' tail, fly-by-wire system and is powered by two turbofans mounted under a twelve aspect ratio wing. The SA-150 will have an initial production run of 800 units and have a purchase price of $37.7 million in 1993 dollars.

Social and economic analysis of the demand for public transport in Vilnius

Directory of Open Access Journals (Sweden)

D. Griškevičienė

2003-08-01

Full Text Available To determine the demand for public transport on the market, a survey was conducted in 2001 - 2002 concerning the situation in the suburban zones of newly - built up districts where public transport is either inaccessible or poorly developed. The analysis was based on major social and economic factors determining the demand for transport. They are: demographic structure and development, restructuring of productive forces and space planning; employment and unemployment; income and poverty; social insurance, pensions and welfare; the household structure; income and expenditures; mobility of the inhabitants and motorization. The accessibility of transport services to passengers and the choice of transport facilities is closely related to their purchasing power. The offer of public transport services is lower than the demand, especially in the suburbs. As a result, the competition of automobiles is very strong there: the preference given to a car is determined by inaccessibility of public transport on the route for 22 % of the inhabitants, while for 20 % the reason was long way to a bus stop or large intervals in the schedule of public transport facilities. Based on the results obtained, the public transport system in Vilnius should be developed along three main lines: 1 raising the quality of public transport provided on fixed routes; 2 revising and updating the system of fares; 3 integrating the suburban public transport system into the central city transport system. These are the priority tasks associated with general goals of improving the system of public transport so that it could satisfy the needs of the passengers in the city.

Integrated Mode Choice, Small Aircraft Demand, and Airport Operations Model User's Guide

Science.gov (United States)

Yackovetsky, Robert E. (Technical Monitor); Dollyhigh, Samuel M.

2004-01-01

A mode choice model that generates on-demand air travel forecasts at a set of GA airports based on changes in economic characteristics, vehicle performance characteristics such as speed and cost, and demographic trends has been integrated with a model to generate itinerate aircraft operations by airplane category at a set of 3227 airports. Numerous intermediate outputs can be generated, such as the number of additional trips diverted from automobiles and schedule air by the improved performance and cost of on-demand air vehicles. The total number of transported passenger miles that are diverted is also available. From these results the number of new aircraft to service the increased demand can be calculated. Output from the models discussed is in the format to generate the origin and destination traffic flow between the 3227 airports based on solutions to a gravity model.

Passenger flow analysis of Beijing urban rail transit network using fractal approach

Science.gov (United States)

Li, Xiaohong; Chen, Peiwen; Chen, Feng; Wang, Zijia

2018-04-01

To quantify the spatiotemporal distribution of passenger flow and the characteristics of an urban rail transit network, we introduce four radius fractal dimensions and two branch fractal dimensions by combining a fractal approach with passenger flow assignment model. These fractal dimensions can numerically describe the complexity of passenger flow in the urban rail transit network and its change characteristics. Based on it, we establish a fractal quantification method to measure the fractal characteristics of passenger follow in the rail transit network. Finally, we validate the reasonability of our proposed method by using the actual data of Beijing subway network. It has been shown that our proposed method can effectively measure the scale-free range of the urban rail transit network, network development and the fractal characteristics of time-varying passenger flow, which further provides a reference for network planning and analysis of passenger flow.

Deduction of passengers' route choices from smart card data

NARCIS (Netherlands)

van der Hurk, E.; Kroon, L.G.; Maroti, G.; Vervest, P.

2015-01-01

Deducing passengers' route choices from smart card data provides public transport operators the opportunity to evaluate and improve their passenger service. Particularly in the case of disruptions, when traditional route choice models may not be valid, this is an advantage. This paper proposes a

Analysing passenger arrivals rates and waiting time at bus stops

OpenAIRE

Kaparias, I.; Rossetti, C.; Trozzi, V.

2015-01-01

The present study investigates the rather under-explored topic of passenger waiting times at public transport facilities. Using data collected from part of London’s bus network by means of physical counts, measurements and observations, and complemented by on-site passenger interviews, the waiting behaviour is analysed for a number of bus stops served by different numbers of lines. The analysis employs a wide range of statistical methods and tools, and concentrates on three aspects: passenger...

49 CFR 223.17 - Identification of equipped locomotives, passenger cars and cabooses.

Science.gov (United States)

2010-10-01

... cars and cabooses. 223.17 Section 223.17 Transportation Other Regulations Relating to Transportation...-LOCOMOTIVES, PASSENGER CARS AND CABOOSES Specific Requirements § 223.17 Identification of equipped locomotives, passenger cars and cabooses. Each locomotive, passenger car and caboose that is fully equipped with glazing...

Dynamics of Air Passenger Transportation in Eastern Romania

Directory of Open Access Journals (Sweden)

Dan Păuna

2013-10-01

Full Text Available The concept of an air route mile is, of course, entirely different from that of a road or rail route mile. An air route is a direct service between two cities. The too-rapid development of the air route system must inevitably result in an average intensity of operations on the route, and this means the frequencies are low or high, or the airplanes used are profitable or unprofitable. The purpose of this paper is to emphasize air passenger dynamics in Romania and to calculate specific indicators regarding this calculation for the airports in eastern Romania in 2011t., this, because the air passenger featurea indicator passenger – kilometer, starting with 2009 no longer calculate for aviation and shipping.

Passenger baggage object database (PBOD)

Science.gov (United States)

Gittinger, Jaxon M.; Suknot, April N.; Jimenez, Edward S.; Spaulding, Terry W.; Wenrich, Steve A.

2018-04-01

Detection of anomalies of interest in x-ray images is an ever-evolving problem that requires the rapid development of automatic detection algorithms. Automatic detection algorithms are developed using machine learning techniques, which would require developers to obtain the x-ray machine that was used to create the images being trained on, and compile all associated metadata for those images by hand. The Passenger Baggage Object Database (PBOD) and data acquisition application were designed and developed for acquiring and persisting 2-D and 3-D x-ray image data and associated metadata. PBOD was specifically created to capture simulated airline passenger "stream of commerce" luggage data, but could be applied to other areas of x-ray imaging to utilize machine-learning methods.

Generation of predictive price and trading volume patterns in a model of dynamically evolving free market supply and demand

Directory of Open Access Journals (Sweden)

J. K. Wang

2001-01-01

Full Text Available I present a model of stock market price fluctuations incorporating effects of share supply as a history-dependent function of previous purchases and share demand as a function of price deviation from moving averages. Price charts generated show intervals of oscillations switching amplitude and frequency suddenly in time, forming price and trading volume patterns well-known in market technical analysis. Ultimate price trends agree with traditional predictions for specific patterns. The consideration of dynamically evolving supply and demand in this model resolves the apparent contradiction with the Efficient Market Hypothesis: perceptions of imprecise equity values by a world of investors evolve over non-negligible periods of time, with dependence on price history.

Deduction of passengers' route choice from smart card data

NARCIS (Netherlands)

Van Der Hurk, Evelien; Kroon, Leo; Maroti, Gabor; Vervest, Peter

2013-01-01

Deducing passengers' route choice from smart card data provides public transport operators the opportunity to evaluate passenger service. Especially in case of disruptions when route choice models may not be valid this is an advantage. This paper proposes a method for deducing the chosen route of

The Danish national passenger model – Model specification and results

DEFF Research Database (Denmark)

Rich, Jeppe; Hansen, Christian Overgaard

2016-01-01

The paper describes the structure of the new Danish National Passenger model and provides on this basis a general discussion of large-scale model design, cost-damping and model validation. The paper aims at providing three main contributions to the existing literature. Firstly, at the general level......, the paper provides a description of a large-scale forecast model with a discussion of the linkage between population synthesis, demand and assignment. Secondly, the paper gives specific attention to model specification and in particular choice of functional form and cost-damping. Specifically we suggest...... a family of logarithmic spline functions and illustrate how it is applied in the model. Thirdly and finally, we evaluate model sensitivity and performance by evaluating the distance distribution and elasticities. In the paper we present results where the spline-function is compared with more traditional...

Examining Passenger Flow Choke Points at Airports Using Discrete Event Simulation

Science.gov (United States)

Brown, Jeremy R.; Madhavan, Poomima

2011-01-01

The movement of passengers through an airport quickly, safely, and efficiently is the main function of the various checkpoints (check-in, security. etc) found in airports. Human error combined with other breakdowns in the complex system of the airport can disrupt passenger flow through the airport leading to lengthy waiting times, missing luggage and missed flights. In this paper we present a model of passenger flow through an airport using discrete event simulation that will provide a closer look into the possible reasons for breakdowns and their implications for passenger flow. The simulation is based on data collected at Norfolk International Airport (ORF). The primary goal of this simulation is to present ways to optimize the work force to keep passenger flow smooth even during peak travel times and for emergency preparedness at ORF in case of adverse events. In this simulation we ran three different scenarios: real world, increased check-in stations, and multiple waiting lines. Increased check-in stations increased waiting time and instantaneous utilization. while the multiple waiting lines decreased both the waiting time and instantaneous utilization. This simulation was able to show how different changes affected the passenger flow through the airport.

Optimal planning of the Nordic transmission system with 100% electric vehicle penetration of passenger cars by 2050

International Nuclear Information System (INIS)

Graabak, Ingeborg; Wu, Qiuwei; Warland, Leif; Liu, Zhaoxi

2016-01-01

This paper presents the optimal planning of the Nordic backbone transmission system with 100% electric vehicle penetration of passenger cars by 2050. Electric vehicles will play an important role in the future energy systems and can reduce the greenhouse gas emission from the transport sector. However, the electric vehicles will increase the electricity consumption and might induce congestions in the transmission systems. In order to deal with the electricity consumption increase from the electric vehicle integration into the power system and maximize the social welfare, the optimal investments of the Nordic transmission system are studied. Case studies were conducted using the market simulation model EMPS (Efi's multi-area power market simulator) and two electric vehicle charging scenarios: a spot price based scenario and a dumb charging scenario. The electric vehicle charging power is assumed to be 3.68 kW with 1 phase 16 A. The complete electrification of the private passenger fleet increases the yearly power demand in the Nordic region with ca 7.5%. The profitable increases in transmission capacities are highest for dumb charging, but are very low for both dumb and spot price based charging compared to a Reference case. - Highlights: • The electric vehicle distribution is done using population and car statistics. • The 100% penetration electric vehicle demand is obtained for Nordic countries. • The optimal investments in the Nordic transmission system with electric vehicles are studied.

Drivers' and conductors' views on the causes and ways of preventing workplace violence in the road passenger transport sector in Maputo City, Mozambique

Directory of Open Access Journals (Sweden)

Tillgren Per

2011-10-01

neighborhoods. Finally, there is a need for an institution to judge alleged cases of employees not handing over demanded revenues to their employer. Conclusions The causes of WPV lie in problems regarding money, behavior, environment, organization and crime. Suggestions for prevention include education, control to avoid critical situations, and a judicial system to assess malpractices. Further research in the road passenger transport sector in Maputo City, Mozambique and similar settings is warranted.

Performance Analysis of Stop-Skipping Scheduling Plans in Rail Transit under Time-Dependent Demand.

Science.gov (United States)

Cao, Zhichao; Yuan, Zhenzhou; Zhang, Silin

2016-07-13

Stop-skipping is a key method for alleviating congestion in rail transit, where schedules are sometimes difficult to implement. Several mechanisms have been proposed and analyzed in the literature, but very few performance comparisons are available. This study formulated train choice behavior estimation into the model considering passengers' perception. If a passenger's train path can be identified, this information would be useful for improving the stop-skipping schedule service. Multi-performance is a key characteristic of our proposed five stop-skipping schedules, but quantified analysis can be used to illustrate the different effects of well-known deterministic and stochastic forms. Problems in the novel category of forms were justified in the context of a single line rather than transit network. We analyzed four deterministic forms based on the well-known A/B stop-skipping operating strategy. A stochastic form was innovatively modeled as a binary integer programming problem. We present a performance analysis of our proposed model to demonstrate that stop-skipping can feasibly be used to improve the service of passengers and enhance the elasticity of train operations under demand variations along with an explicit parametric discussion.

Factors related to seatbelt-wearing among rear-seat passengers in Malaysia.

Science.gov (United States)

Ng, Choy Peng; Law, Teik Hua; Wong, Shaw Voon; Kulanthayan, S

2013-01-01

The benefit of wearing a rear seatbelt in reducing the risk of motor vehicle crash-related fatalities and injuries has been well documented in previous studies. Wearing a seatbelt not only reduces the risk of injury to rear-seat passengers, but also reduces the risk of injury to front-seat occupant who could be crushed by unbelted rear-seat passengers in a motor vehicle crash. Despite the benefits of wearing a rear seatbelt, its rate of use in Malaysia is generally low. The objective of this study was to identify factors that are associated with the wearing of a seatbelt among rear-seat passengers in Malaysia. Multinomial logistic regression analysis of the results of a questionnaire survey of 1651 rear-seat passengers revealed that rear-seat passengers who were younger, male, single and less educated and who had a perception of a low level of legislation enforcement, a lower risk-aversion and less driving experience (only for passengers who are also drivers) were less likely to wear a rear seatbelt. There was also a significant positive correlation between driver seatbelt and rear seatbelt-wearing behaviour. This implies that, in regards to seatbelt-wearing behaviour, drivers are more likely to adopt the same seatbelt-wearing behaviour when travelling as rear-seat passengers as they do when driving. These findings are crucial to the development of new interventions to increase the compliance rate of wearing a rear seatbelt. Copyright © 2012 Elsevier Ltd. All rights reserved.

The effect of passengers on teen driver behavior : traffic tech.

Science.gov (United States)

2012-04-01

A number of studies have shown that passengers substantially : increase the risk of crashes for young, novice drivers. : This increased risk may result from distractions that young : passengers create for drivers. Alternatively, the presence : of pas...

76 FR 77716 - Alternate Passenger Rail Service Pilot Program

Science.gov (United States)

2011-12-14

...-0108; Notice No. 2] RIN 2130-AC19 Alternate Passenger Rail Service Pilot Program AGENCY: Federal... rule is in response to a statutory mandate that FRA complete a rulemaking proceeding to develop a pilot... enactment of the Passenger Rail Investment and Improvement Act of 2008. The final rule develops this pilot...

Developing a Risk Model for Fire in Passenger Ships - Based on Bayesian Belief Network

OpenAIRE

Dokmo, Hanne Bjørkås

2016-01-01

Passenger ships, especially cruise ships, are rapidly increasing in size. With larger vessels, comes a greater risk to the passengers if something where to happen. A fire on a passenger vessel can spread quickly, and with as much as thousands of people needing to be evacuated many things could go wrong. The issue of the safety on board is therefore crucial to consider, seeing as the consequences could be tremendous. There are three types of passenger ships; Passenger vessel, RoPax vessel and ...

Effects of passengers on bus driver celeration behavior and incident prediction.

Science.gov (United States)

Af Wåhlberg, A E

2007-01-01

Driver celeration (speed change) behavior of bus drivers has previously been found to predict their traffic incident involvement, but it has also been ascertained that the level of celeration is influenced by the number of passengers carried as well as other traffic density variables. This means that the individual level of celeration is not as well estimated as could be the case. Another hypothesized influence of the number of passengers is that of differential quality of measurements, where high passenger density circumstances are supposed to yield better estimates of the individual driver component of celeration behavior. Comparisons were made between different variants of the celeration as predictor of traffic incidents of bus drivers. The number of bus passengers was held constant, and cases identified by their number of passengers per kilometer during measurement were excluded (in 12 samples of repeated measurements). After holding passengers constant, the correlations between celeration behavior and incident record increased very slightly. Also, the selective prediction of incident record of those drivers who had had many passengers when measured increased the correlations even more. The influence of traffic density variables like the number of passengers have little direct influence on the predictive power of celeration behavior, despite the impact upon absolute celeration level. Selective prediction on the other hand increased correlations substantially. This unusual effect was probably due to how the individual propensity for high or low celeration driving was affected by the number of stops made and general traffic density; differences between drivers in this respect were probably enhanced by the denser traffic, thus creating a better estimate of the theoretical celeration behavior parameter C. The new concept of selective prediction was discussed in terms of making estimates of the systematic differences in quality of the individual driver data.

Predicting Passenger Survival Rates on the Titanic

OpenAIRE

Prateek Chanda

2017-01-01

The sinking of the RMS Titanic is one of the most infamous shipwrecks in history. On April 15, 1912, during her maiden voyage, the Titanic sank after colliding with an iceberg, killing 1502 out of 2224 passengers and crew. This sensational tragedy shocked the international community and led to better safety regulations for ships. One of the reasons that the shipwreck led to such loss of life was that there were not enough lifeboats for the passengers and crew. Although there was some el...

Cosmic radiation exposure to airline flight passenger

International Nuclear Information System (INIS)

Momose, Mitsuhiro

2000-01-01

At the high altitudes, airline flight passengers can be exposed to some levels of cosmic radiation. The purpose of this study was to quantify this radiation exposure. Cosmic radiation was measured during 5 flights using a personal dosimeter (PDM-102, Aloka). Cosmic radiation equivalent dose rates ranged from 0.7 to 1.43 microsieverts per hour, the average rate was 1.08. For the passenger who travels only occasionally, the cosmic radiation levels are well below occupational limits, and the risks are extremely small. (author)

Cosmic radiation exposure to airline flight passenger

Energy Technology Data Exchange (ETDEWEB)

Momose, Mitsuhiro [Shinshu Univ., Matsumoto, Nagano (Japan). School of Medicine

2000-08-01

At the high altitudes, airline flight passengers can be exposed to some levels of cosmic radiation. The purpose of this study was to quantify this radiation exposure. Cosmic radiation was measured during 5 flights using a personal dosimeter (PDM-102, Aloka). Cosmic radiation equivalent dose rates ranged from 0.7 to 1.43 microsieverts per hour, the average rate was 1.08. For the passenger who travels only occasionally, the cosmic radiation levels are well below occupational limits, and the risks are extremely small. (author)

Passengers' perception of the safety demonstration on board an aircraft

Science.gov (United States)

Ruenruoy, Ratchada

The cabin safety demonstration on board an aircraft is one of the methods to provide safety information for passengers before aircraft takeoff. However, passengers' enthusiasm toward safety demonstrations is normally low. Therefore, the study of passengers' perception toward safety briefings on board an aircraft is important in increasing the safety awareness for the travelling public on commercial aircraft. A survey was distributed to measure the perceptions of Middle Tennessee State University (MTSU) faculty and staff, Aerospace students, and international students who have traveled in the last year. It was generally found that watching the cabin safety demonstration before aircraft takeoff was believed to be important for passengers. However, the attention to the safety demonstration remained low because the safety briefings were not good enough in terms of clear communication, particularly in the recorded audio demonstration and the live safety demonstration methods of briefing.

Route planning for airport personnel transporting passengers with reduced mobility

DEFF Research Database (Denmark)

Reinhardt, Line Blander; Clausen, Tommy; Pisinger, David

transportation for the passengers with reduced mobility. It is often necessary for a passenger with reduced mobility to use several different modes of transport during their journey through the airport. Synchronization occurs at the locations where transport modes are changed as to not leave passengers...... unattended. A description of the problem together with a mathematical model is presented. The objective is to maximize the quality of service by scheduling as many of the passengers as possible, while ensuring a smooth transport with short waiting times. A simulated annealing based heuristic for solving...... the problem is presented. The algorithm makes use of an abstract representation of a candidate solution which in each step is transformed to an actual schedule by use of a greedy heuristic. Local search is performed on the abstract representation using advanced neighborhoods which modify large parts...

Natural selection shaped the rise and fall of passenger pigeon genomic diversity.

Science.gov (United States)

Murray, Gemma G R; Soares, André E R; Novak, Ben J; Schaefer, Nathan K; Cahill, James A; Baker, Allan J; Demboski, John R; Doll, Andrew; Da Fonseca, Rute R; Fulton, Tara L; Gilbert, M Thomas P; Heintzman, Peter D; Letts, Brandon; McIntosh, George; O'Connell, Brendan L; Peck, Mark; Pipes, Marie-Lorraine; Rice, Edward S; Santos, Kathryn M; Sohrweide, A Gregory; Vohr, Samuel H; Corbett-Detig, Russell B; Green, Richard E; Shapiro, Beth

2017-11-17

The extinct passenger pigeon was once the most abundant bird in North America, and possibly the world. Although theory predicts that large populations will be more genetically diverse, passenger pigeon genetic diversity was surprisingly low. To investigate this disconnect, we analyzed 41 mitochondrial and 4 nuclear genomes from passenger pigeons and 2 genomes from band-tailed pigeons, which are passenger pigeons' closest living relatives. Passenger pigeons' large population size appears to have allowed for faster adaptive evolution and removal of harmful mutations, driving a huge loss in their neutral genetic diversity. These results demonstrate the effect that selection can have on a vertebrate genome and contradict results that suggested that population instability contributed to this species's surprisingly rapid extinction. Copyright © 2017, American Association for the Advancement of Science.

Modernisation of passengers stock deposit at the regional division Braşov

Directory of Open Access Journals (Sweden)

Elena SIMA

2010-08-01

Full Text Available The purpose of this paper is to present the latest accomplishments at the Regional Division Brasov regarding the modernisation of stock depot for passengers but also future programs that will continue this process. The rolling stock used in passenger transport was followed: passenger wagons, sleeping wagons, diesel engines, electric engines.   Passenger transport organisation should aim the accomplishment of the following requirements: ensuring passengers’ security on the route and in stations; reducing travel time (by increasing trains’ speed, choosing the best routes, reducing stops at stations, ensuring certain fast links at railway junctions; intensive usage of rolling stock, of fixed installations; the appropriate combination of freight with passenger transport, passengers’ good serving at stations and trains, especially by ensuring a timetable which would provide convenient hours and reliable connections at railway junctions.

Synchronized dial-a-ride transportation of disabled passengers at airports

DEFF Research Database (Denmark)

Reinhardt, Line Blander; Clausen, Tommy; Pisinger, David

2013-01-01

The largest airports have a daily average throughput of more than 500 passengers with reduced mobility. The problem of transporting these passengers is in some cases a multi-modal transportation problem with synchronization constraints. A description of the problem together with a mathematical...... model is presented. The objective is to schedule as many of the passengers as possible, while ensuring a smooth transport with short waiting times. A simulated annealing based heuristic for solving the problem is presented. The algorithm makes use of an abstract representation of a candidate solution...

Computation of thermal comfort inside a passenger car compartment

International Nuclear Information System (INIS)

Mezrhab, A.; Bouzidi, M.

2006-01-01

This paper describes a numerical model to study the behaviour of thermal comfort inside the passenger car compartment according to climatic conditions and materials that compose the vehicle. The specifically developed numerical model is based on the nodal method and the finite difference method. Its specificities are: (i) the transient mode, (ii) the taking into account of the combined convection, conduction and radiation heat transfer, (iii) the coupling of two spectral bands (short-wave and long-wave radiation) and two solar fluxes (beam and diffuse). The compartment is subdivided in several solid nodes (materials constituting the compartment) and fluid nodes (volumes of air inside the compartment). The establishment of the heat balance for each node gives the evolution of its temperature. Effects of solar radiation, types of glazing, car colour and radiative properties of materials constituting the compartment are investigated

Demand-side management project for Tenaga Nasional Berhad. Energy efficiency guidelines. Progress report No. 3. Volume 1. Final report. Export trade information

Energy Technology Data Exchange (ETDEWEB)

NONE

1993-05-01

This study, conducted by the California Energy Commission, was funded by the U.S. Trade and Development Agency. The report summarizes a demand-side management study performed for the Tenaga Nasional Berhad Headquarters Building. The purpose of the study was to identify and evaluate demand side management measures (DSMs) that would reduce energy costs of the facility. Volume 1 is divided into the following sections: (1.0) Executive Summary; (2.0) Facility Background; (3.0) Ventilating and Air Conditioning Systems Description; (4.0) Lightning System Description; Figures, Tables, and Appendices.

Assessing Rates of Global Warming Emissions from Port- Fuel Injection and Gasoline Direct Injection Engines in Light-Duty Passenger Vehicles

Science.gov (United States)

Short, D.; , D., Vi; Durbin, T.; Karavalakis, G.; Asa-Awuku, A. A.

2013-12-01

Passenger vehicles are known emitters of climate warming pollutants. CO2 from automobile emissions are an anthropogenic greenhouse gas (GHG) and a large contributor to global warming. Worldwide, CO2 emissions from passenger vehicles are responsible for 11% of the total CO2 emissions inventory. Black Carbon (BC), another common vehicular emission, may be the second largest contributor to global warming (after CO2). Currently, 52% of BC emissions in the U.S are from the transportation sector, with ~10% originating from passenger vehicles. The share of pollutants from passenger gasoline vehicles is becoming larger due to the reduction of BC from diesel vehicles. Currently, the majority of gasoline passenger vehicles in the United States have port- fuel injection (PFI) engines. Gasoline direct injection (GDI) engines have increased fuel economy compared to the PFI engine. GDI vehicles are predicted to dominate the U.S. passenger vehicle market in the coming years. The method of gasoline injection into the combustion chamber is the primary difference between these two technologies, which can significantly impact primary emissions from light-duty vehicles (LDV). Our study will measure LDV climate warming emissions and assess the impact on climate due to the change in U.S vehicle technologies. Vehicles were tested on a light- duty chassis dynamometer for emissions of CO2, methane (CH4), and BC. These emissions were measured on F3ederal and California transient test cycles and at steady-state speeds. Vehicles used a gasoline blend of 10% by volume ethanol (E10). E10 fuel is now found in 95% of gasoline stations in the U.S. Data is presented from one GDI and one PFI vehicle. The 2012 Kia Optima utilizes GDI technology and has a large market share of the total GDI vehicles produced in the U.S. In addition, The 2012 Toyota Camry, equipped with a PFI engine, was the most popular vehicle model sold in the U.S. in 2012. Methane emissions were ~50% lower for the GDI technology

Distribution pattern of public transport passenger in Yogyakarta, Indonesia

Science.gov (United States)

Narendra, Alfa; Malkhamah, Siti; Sopha, Bertha Maya

2018-03-01

The arrival and departure distribution pattern of Trans Jogja bus passenger is one of the fundamental model for simulation. The purpose of this paper is to build models of passengers flows. This research used passengers data from January to May 2014. There is no policy that change the operation system affecting the nature of this pattern nowadays. The roads, buses, land uses, schedule, and people are relatively still the same. The data then categorized based on the direction, days, and location. Moreover, each category was fitted into some well-known discrete distributions. Those distributions are compared based on its AIC value and BIC. The chosen distribution model has the smallest AIC and BIC value and the negative binomial distribution found has the smallest AIC and BIC value. Probability mass function (PMF) plots of those models were compared to draw generic model from each categorical negative binomial distribution models. The value of accepted generic negative binomial distribution is 0.7064 and 1.4504 of mu. The minimum and maximum passenger vector value of distribution are is 0 and 41.

Ultrafine particle air pollution inside diesel-propelled passenger trains.

Science.gov (United States)

Abramesko, Victoria; Tartakovsky, Leonid

2017-07-01

Locomotives with diesel engines are used worldwide and are an important source of air pollution. Pollutant emissions by locomotive engines affect the air quality inside passenger trains. This study is aimed at investigating ultrafine particle (UFP) air pollution inside passenger trains and providing a basis for assessing passenger exposure to this pollutant. The concentrations of UFPs inside the carriages of push-pull trains are dramatically higher when the train operates in pull mode. This clearly shows that locomotive engine emissions are a dominant factor in train passengers' exposure to UFPs. The highest levels of UFP air pollution are observed inside the carriages of pull trains close to the locomotive. In push mode, the UFP number concentrations were lower by factors of 2.6-43 (depending on the carriage type) compared to pull mode. The UFP concentrations are substantially lower in diesel multiple-unit trains than in trains operating in pull mode. A significant influence of the train movement regime on the UFP NC inside a carriage is observed. Copyright © 2017 Elsevier Ltd. All rights reserved.

Trends in passenger transport energy use in South Korea

International Nuclear Information System (INIS)

Eom, Jiyong; Schipper, Lee

2010-01-01

Having a clear understanding of transport energy use trends is crucial to identifying opportunities and challenges for efficient energy use for the transport sector. To this date, however, no detailed analysis has been conducted with regard to rapidly growing passenger transport energy use in South Korea. Using bottom-up data developed from a variety of recent sources, we described the trends of transport activity, energy use, and CO 2 emissions from South Korea's transport sector since 1986 with a particular focus on its passenger transport. By decomposing the trends in passenger transport energy use into activity, modal structure, and energy intensity, we showed that while travel activity has been the major driver of the increase in passenger transport energy use in South Korea, the increase was to some extent offset by the recent favorable structural shift toward bus travel and away from car travel. We also demonstrated that while bus travel has become less energy intensive since the Asian Financial Crisis, car travel has become increasingly energy intensive.

76 FR 5825 - U.S.-Korea Free Trade Agreement: Passenger Vehicle Sector Update

Science.gov (United States)

2011-02-02

...: Passenger Vehicle Sector Update AGENCY: United States International Trade Commission. ACTION: Institution of...) instituted investigation No. 332-523, U.S.-Korea Free Trade Agreement: Passenger Vehicle Sector Update. DATES... concluded negotiations to modify the FTA, including certain provisions relating to the passenger vehicle...

Customer premises services market demand assessment 1980 - 2000: Volume 2

Science.gov (United States)

Gamble, R. B.; Saporta, L.; Heidenrich, G. A.

1983-01-01

Potential customer premises service (CPS), telecommunication services, potential CPS user classes, a primary research survey, comparative economics, market demand forcasts, distance distribution of traffic, segmentation of market demand, and a nationwide traffic distribution model are discussed.

On-demand high-capacity ride-sharing via dynamic trip-vehicle assignment.

Science.gov (United States)

Alonso-Mora, Javier; Samaranayake, Samitha; Wallar, Alex; Frazzoli, Emilio; Rus, Daniela

2017-01-17

Ride-sharing services are transforming urban mobility by providing timely and convenient transportation to anybody, anywhere, and anytime. These services present enormous potential for positive societal impacts with respect to pollution, energy consumption, congestion, etc. Current mathematical models, however, do not fully address the potential of ride-sharing. Recently, a large-scale study highlighted some of the benefits of car pooling but was limited to static routes with two riders per vehicle (optimally) or three (with heuristics). We present a more general mathematical model for real-time high-capacity ride-sharing that (i) scales to large numbers of passengers and trips and (ii) dynamically generates optimal routes with respect to online demand and vehicle locations. The algorithm starts from a greedy assignment and improves it through a constrained optimization, quickly returning solutions of good quality and converging to the optimal assignment over time. We quantify experimentally the tradeoff between fleet size, capacity, waiting time, travel delay, and operational costs for low- to medium-capacity vehicles, such as taxis and van shuttles. The algorithm is validated with ∼3 million rides extracted from the New York City taxicab public dataset. Our experimental study considers ride-sharing with rider capacity of up to 10 simultaneous passengers per vehicle. The algorithm applies to fleets of autonomous vehicles and also incorporates rebalancing of idling vehicles to areas of high demand. This framework is general and can be used for many real-time multivehicle, multitask assignment problems.

Child Passenger Safety (A Cup of Health with CDC)

Centers for Disease Control (CDC) Podcasts

2016-09-29

Proper installation and use of car seats and booster seats for child passengers can save their lives. CDC recommends drivers ensure children are always buckled up. In this podcast, Bethany West discusses how to keep young passengers as safe as possible.  Created: 9/29/2016 by MMWR.   Date Released: 9/29/2016.

Prospects of introduction of innovative technology overhead passenger traffic on the basis of the passenger ropeways for the modernization of the public transport system of the Bryansk city

Directory of Open Access Journals (Sweden)

Lagerev A.V.

2017-06-01

Full Text Available In relation to the current situation in the field of public transport in the Bryansk city was shown the main problems in the implementation of innovative technology for the aerial passenger transport on the basis of suspended passenger ropeways (Cable metro. Shows the advantages of the cable metro-based mechatronic technology transportation compared to the traditional suspended passenger ropeways. Was made the technical and economic feasibility analysis of the construction of the cable metro in conditions of a highly urbanized urban environment of large cities, metropolises and urban agglomerations. Presented the statistical data on the development of vehicles in the Bryansk city in the period 2004-2016 years and based on the analysis of these data shows the feasibility of the development of aerial passenger transport as the most high-speed and environmentally friendly mode of transport compared with automobile and electric transport. Considered the possible sources of financing of design and construction works and shows the commercial attractiveness of the project to potential investors in the framework of public-private partnerships. For existing urban development and major transport flows of the Bryansk city was formulated proposals for the location of future transport cable metro lines, order their gaskets, the formation routes of movement of the rolling stock. Made the estimation of labor and financial costs for the implementation of the project of modernization of the public transport system of the city of Bryansk on the basis of the suspended passenger ropeways. The proposed option has the following characteristics: the number of transport lines - 6, total length - 54.8 km, total number of passenger boarding stations - 26, hub passenger stations – 6, the total number of intermediate supports – 100...110 pieces with a span between supports of 400...600 m. the cost of construction of transport lines and the purchase of necessary

Customer premises services market demand assessment 1980 - 2000. Volume 1: Executive summary

Science.gov (United States)

Gamble, R. B.; Saporta, L.; Heidenrich, G. A.

1983-01-01

Estimates of market demand for domestic civilian telecommunications services for the years 1980 to 2000 are provided. Overall demand, demand or satellite services, demand for satellite delivered Customer Premises Service (CPS), and demand for 30/20 GHz Customer Premises Services are covered. Emphasis is placed on the CPS market and demand is segmented by market, by service, by user class and by geographic region. Prices for competing services are discussed and the distribution of traffic with respect to distance is estimated. A nationwide traffic distribution model for CPS in terms of demand for CPS traffic and earth stations for each of the major SMSAs in the United States are provided.

Backyard Spaceships - Passenger-Related Microlights for Hobby Rocketry

Science.gov (United States)

Sivier, D.

The FINDS and CATS prizes have introduced to contemporary astronautics the competitive spirit, which led to such spectacular advances in the fledgling aviation industry. This pioneering spirit is also shared by present day microlight aircraft enthusiasts. If the expected expansion of commercial passenger spaceflight with mass space tourism occurs, then it may create a demand for extreme short-range crewed rockets as a new form of leisure craft, just as microlight aircraft recreate the experience of large aircraft flight on a smaller scale. If the technologies, materials and procedures used in microlight and balloon aviation are applied to those of high power solid propellant rocketry, then similar `microlight' rockets with a mass of 500 kg, powered by 20 kg of fuel and able to reach altitudes of c.3,200 m, may be a possibility. Apart from the leisure and sporting opportunities offered by such craft, which would also encourage technological experimentation and progress, they would also greatly benefit astronautical education by adding the practical human experience of rocket flight to ground studies' curricula.

Safety of railroad passenger vehicle dynamics : OMNISIM simulation and test correlations for passenger rail cars

Science.gov (United States)

2002-07-01

The purpose of the work is to validate the safety assessment methodology previously developed for passenger rail vehicle dynamics, which requires the application of simulation tools as well as testing of vehicles under different track scenarios. This...

Logistic system as an essential element of modern organization of railway passenger traffic

Directory of Open Access Journals (Sweden)

O.A. Khodoskina

2012-04-01

Full Text Available The role and place of passenger transport services in the modern structure of rail transportation is considered. The need for approach to rail passenger transport as a logistics system, which is characterized by a set of parameters corresponding to the concept of logistics system in general and taking into account the peculiarities of railway passenger transportation is determined. The features of formation of such a system, taking into account the generally accepted theoretical approach and the specifics of rail transport are also presented. The concept of logistic system for railway vehicles is given; its overall structure is reviewed. The structure of the particular transport is defined by rail freight and in passenger traffic. Is an example of a mathematical model of the logistics system of rail passenger services on the basis of sets of incoming and outgoing parameters is determined. The structure of technologic process for goods and passenger transportation by rail from the perspective of logistics is characterized.

Passenger thermal comfort and behavior: a field investigation in commercial aircraft cabins.

Science.gov (United States)

Cui, W; Wu, T; Ouyang, Q; Zhu, Y

2017-01-01

Passengers' behavioral adjustments warrant greater attention in thermal comfort research in aircraft cabins. Thus, a field investigation on 10 commercial aircrafts was conducted. Environment measurements were made and a questionnaire survey was performed. In the questionnaire, passengers were asked to evaluate their thermal comfort and record their adjustments regarding the usage of blankets and ventilation nozzles. The results indicate that behavioral adjustments in the cabin and the use of blankets or nozzle adjustments were employed by 2/3 of the passengers. However, the thermal comfort evaluations by these passengers were not as good as the evaluations by passengers who did not perform any adjustments. Possible causes such as differences in metabolic rate, clothing insulation and radiation asymmetry are discussed. The individual difference seems to be the most probable contributor, suggesting possibly that passengers who made adjustments had a narrower acceptance threshold or a higher expectancy regarding the cabin environment. Local thermal comfort was closely related to the adjustments and significantly influenced overall thermal comfort. Frequent flying was associated with lower ratings for the cabin environment. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

75 FR 78063 - Passenger Weight and Inspected Vessel Stability Requirements

Science.gov (United States)

2010-12-14

... for determining the maximum passenger capacity of small passenger pontoon vessels either by: Dividing.... 176.110 explicitly calling attention to the OCMI's prerogative to consider a vessel's suitability for... factors to which vessel masters should give special attention in both sections, and a requirement in Sec...

Commercial Passenger Fishing Vessel Fishery

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains the logbook data from U.S.A. Commercial Passenger Fishing Vessels (CPFV) fishing in the U.S.A. EEZ and in waters off of Baja California, from...

Fire-resistant materials for aircraft passenger seat construction

Science.gov (United States)

Fewell, L. L.; Tesoro, G. C.; Moussa, A.; Kourtides, D. A.

1979-01-01

The thermal response characteristics of fabric and fabric-foam assemblies are described. The various aspects of the ignition behavior of contemporary aircraft passenger seat upholstery fabric materials relative to fabric materials made from thermally stable polymers are evaluated. The role of the polymeric foam backing on the thermal response of the fabric-foam assembly is also ascertained. The optimum utilization of improved fire-resistant fabric and foam materials in the construction of aircraft passenger seats is suggested.

Forecasting of passenger traffic in Moscow metro applying artificial neural networks

International Nuclear Information System (INIS)

Ivanov, V.V.; Natsional'nyj Issledovatel'skij Yadernyj Univ. MIFI, Moscow; FKU Rostransmodernizatsiya, Moscow

2016-01-01

Methods for the forecasting of passenger traffic in Moscow metro have been developed using artificial neural networks. To this end, the factors primarily determining passenger traffic in the subway have been analyzed and selected [ru

Validating the passenger traffic model for Copenhagen

DEFF Research Database (Denmark)

Overgård, Christian Hansen; VUK, Goran

2006-01-01

The paper presents a comprehensive validation procedure for the passenger traffic model for Copenhagen based on external data from the Danish national travel survey and traffic counts. The model was validated for the years 2000 to 2004, with 2004 being of particular interest because the Copenhagen...... matched the observed traffic better than those of the transit assignment model. With respect to the metro forecasts, the model over-predicts metro passenger flows by 10% to 50%. The wide range of findings from the project resulted in two actions. First, a project was started in January 2005 to upgrade...

CONCEPTUAL APPROACHES TO CREATE CONTROL MECHANISM BY PASSENGER COMMUTATION SERVICES

Directory of Open Access Journals (Sweden)

V. O. Zadoya

2010-11-01

Full Text Available In the article the basic approaches of improving a management mechanism for passenger suburban railway transportations are considered, and the classification of reformation models for passenger suburban railway transportations depending on scales, degree of independence, department subordination and amount of proprietors of future company is offered.

A trade-off analysis design tool. Aircraft interior noise-motion/passenger satisfaction model

Science.gov (United States)

Jacobson, I. D.

1977-01-01

A design tool was developed to enhance aircraft passenger satisfaction. The effect of aircraft interior motion and noise on passenger comfort and satisfaction was modelled. Effects of individual aircraft noise sources were accounted for, and the impact of noise on passenger activities and noise levels to safeguard passenger hearing were investigated. The motion noise effect models provide a means for tradeoff analyses between noise and motion variables, and also provide a framework for optimizing noise reduction among noise sources. Data for the models were collected onboard commercial aircraft flights and specially scheduled tests.

An Evacuation Model for Passenger Ships That Includes the Influence of Obstacles in Cabins

Directory of Open Access Journals (Sweden)

Baocheng Ni

2017-01-01

Full Text Available Passenger behavior and ship environment are the key factors affecting evacuation efficiency. However, current studies ignore the interior layout of passenger ship cabins and treat the cabins as empty rooms. To investigate the influence of obstacles (e.g., tables and stools on cabin evacuation, we propose an agent-based social force model for advanced evacuation analysis of passenger ships; this model uses a goal-driven submodel to determine a plan and an extended social force submodel to govern the movement of passengers. The extended social force submodel considers the interaction forces between the passengers, crew, and obstacles and minimises the range of these forces to improve computational efficiency. We drew the following conclusions based on a series of evacuation simulations conducted in this study: (1 the proposed model endows the passenger with the behaviors of bypassing and crossing obstacles, (2 funnel-shaped exits from cabins can improve evacuation efficiency, and (3 as the exit angle increases, the evacuation time also increases. These findings offer ship designers some insight towards increasing the safety of large passenger ships.

46 CFR 25.45-2 - Cooking systems on vessels carrying passengers for hire.

Science.gov (United States)

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Cooking systems on vessels carrying passengers for hire... REQUIREMENTS Cooking, Heating, and Lighting Systems § 25.45-2 Cooking systems on vessels carrying passengers for hire. (a) No fuel may be used in any cooking system on any vessel carrying passengers for hire...

Ballistic Resistance of Armored Passenger Vehicles: Test Protocols and Quality Methods

Energy Technology Data Exchange (ETDEWEB)

Jeffrey M. Lacy; Robert E. Polk

2005-07-01

This guide establishes a test methodology for determining the overall ballistic resistance of the passenger compartment of assembled nontactical armored passenger vehicles (APVs). Because ballistic testing of every piece of every component of an armored vehicle is impractical, if not impossible, this guide describes a testing scheme based on statistical sampling of exposed component surface areas. Results from the test of the sampled points are combined to form a test score that reflects the probability of ballistic penetration into the passenger compartment of the vehicle.

Peer Passenger Norms and Pressure: Experimental Effects on Simulated Driving Among Teenage Males.

Science.gov (United States)

Bingham, C Raymond; Simons-Morton, Bruce G; Pradhan, Anuj K; Li, Kaigang; Almani, Farideh; Falk, Emily B; Shope, Jean T; Buckley, Lisa; Ouimet, Marie Claude; Albert, Paul S

2016-08-01

Serious crashes are more likely when teenage drivers have teenage passengers. One likely source of this increased risk is social influences on driving performance. This driving simulator study experimentally tested the effects of peer influence (i.e., risk-accepting compared to risk-averse peer norms reinforced by pressure) on the driving risk behavior (i.e., risky driving behavior and inattention to hazards) of male teenagers. It was hypothesized that peer presence would result in greater driving risk behavior (i.e., increased driving risk and reduced latent hazard anticipation), and that the effect would be greater when the peer was risk-accepting. Fifty-three 16- and 17-year-old male participants holding a provisional U.S., State of Michigan driver license were randomized to either a risk-accepting or risk-averse condition. Each participant operated a driving simulator while alone and separately with a confederate peer passenger. The simulator world included scenarios designed to elicit variation in driving risk behavior with a teen passenger present in the vehicle. Significant interactions of passenger presence (passenger present vs. alone) by risk condition (risk-accepting vs. risk-averse) were observed for variables measuring: failure to stop at yellow light intersections (Incident Rate Ratio (IRR)=2.16; 95% Confidence Interval [95CI]=1.06, 4.43); higher probability of overtaking (IRR=10.17; 95CI=1.43, 73.35); shorter left turn latency (IRR=0.43; 95CI=0.31,0.60); and, failure to stop at an intersection with an occluded stop sign (IRR=7.90; 95CI=2.06,30.35). In all cases, greater risky driving by participants was more likely with a risk-accepting passenger versus a risk-averse passenger present and a risk-accepting passenger present versus driving alone. Exposure of male teenagers to a risk-accepting confederate peer passenger who applied peer influence increased simulated risky driving behavior compared with exposure to a risk-averse confederate peer

Ad libitum or demand/semi-demand feeding versus scheduled interval feeding for preterm infants.

Science.gov (United States)

McCormick, Felicia M; Tosh, Karen; McGuire, William

2010-02-17

Scheduled interval feeding of prescribed enteral volumes is current standard practice for preterm infants. However, feeding preterm infants in response to their hunger and satiation cues (ad libitum or demand/semi demand) rather than at scheduled intervals might help in the establishment of independent oral feeding, increase nutrient intake and growth rates, and allow earlier hospital discharge. To assess the effect of a policy of feeding preterm infants on an ad libitum or demand/semi-demand basis versus feeding prescribed volumes at scheduled intervals on growth rates and the time to hospital discharge. We used the standard search strategy of the Cochrane Neonatal Review Group. This included searches of the Cochrane Central Register of Controlled Trials (CENTRAL, The Cochrane Library, Issue 4, 2009), MEDLINE (1966 to Oct 2009), EMBASE (1980 to Oct 2009), CINAHL (1982 to Oct 2009), conference proceedings, and previous reviews. Randomised or quasi-randomised controlled trials (including cluster randomised trials) that compared a policy of feeding preterm infants on an ad libitum or demand/semi-demand basis versus feeding at scheduled intervals. We used the standard methods of the Cochrane Neonatal Review Group with separate evaluation of trial quality and data extraction by two review authors. We found eight randomised controlled trials that compared ad libitum or demand/semi-demand regimens with scheduled interval regimes in preterm infants in the transition phase from intragastric tube to oral feeding. The trials were generally small and of variable methodological quality. The duration of the intervention and the duration of data collection and follow-up in most of the trials was not likely to have allowed detection of measurable effects on growth. Three trials reported that feeding preterm infants using an ad libitum or demand/semi-demand feeding regimen allowed earlier discharge from hospital (by about two to four days) but other trials did not confirm this

Dynamic Pricing for Airline Revenue Management under Passenger Mental Accounting

Directory of Open Access Journals (Sweden)

Yusheng Hu

2015-01-01

Full Text Available Mental accounting is a far-reaching concept, which is often used to explain various kinds of irrational behaviors in human decision making process. This paper investigates dynamic pricing problems for single-flight and multiple flights settings, respectively, where passengers may be affected by mental accounting. We analyze dynamic pricing problems by means of the dynamic programming method and obtain the optimal pricing strategies. Further, we analytically show that the passenger mental accounting depth has a positive effect on the flight’s expected revenue for the single flight and numerically illustrate that the passenger mental accounting depth has a positive effect on the optimal prices for the multiple flights.

Tripartite equilibrium strategy for a carbon tax setting problem in air passenger transport.

Science.gov (United States)

Xu, Jiuping; Qiu, Rui; Tao, Zhimiao; Xie, Heping

2018-03-01

Carbon emissions in air passenger transport have become increasing serious with the rapidly development of aviation industry. Combined with a tripartite equilibrium strategy, this paper proposes a multi-level multi-objective model for an air passenger transport carbon tax setting problem (CTSP) among an international organization, an airline and passengers with the fuzzy uncertainty. The proposed model is simplified to an equivalent crisp model by a weighted sum procedure and a Karush-Kuhn-Tucker (KKT) transformation method. To solve the equivalent crisp model, a fuzzy logic controlled genetic algorithm with entropy-Bolitzmann selection (FLC-GA with EBS) is designed as an integrated solution method. Then, a numerical example is provided to demonstrate the practicality and efficiency of the optimization method. Results show that the cap tax mechanism is an important part of air passenger trans'port carbon emission mitigation and thus, it should be effectively applied to air passenger transport. These results also indicate that the proposed method can provide efficient ways of mitigating carbon emissions for air passenger transport, and therefore assist decision makers in formulating relevant strategies under multiple scenarios.

Investigating risky, distracting, and protective peer passenger effects in a dual process framework.

Science.gov (United States)

Ross, Veerle; Jongen, Ellen M M; Brijs, Kris; Brijs, Tom; Wets, Geert

2016-08-01

Prior studies indicated higher collision rates among young novice drivers with peer passengers. This driving simulator study provided a test for a dual process theory of risky driving by examining social rewards (peer passengers) and cognitive control (inhibitory control). The analyses included age (17-18 yrs, n=30; 21-24 yrs, n=20). Risky, distracting, and protective effects were classified by underlying driver error mechanisms. In the first drive, participants drove alone. In the second, participants drove with a peer passenger. Red-light running (violation) was more prevalent in the presence of peer passengers, which provided initial support for a dual process theory of risk driving. In a subgroup with low inhibitory control, speeding (violation) was more prevalent in the presence of peer passengers. Reduced lane-keeping variability reflected distracting effects. Nevertheless, possible protective effects for amber-light running and hazard handling (cognition and decision-making) were found in the drive with peer passengers. Avenues for further research and possible implications for targets of future driver training programs are discussed. Copyright © 2016 Elsevier Ltd. All rights reserved.

Optimal Path Choice in Railway Passenger Travel Network Based on Residual Train Capacity

Directory of Open Access Journals (Sweden)

Fei Dou

2014-01-01

Full Text Available Passenger’s optimal path choice is one of the prominent research topics in the field of railway passenger transport organization. More and more different train types are available, increasing path choices from departure to destination for travelers are unstoppable. However, travelers cannot avoid being confused when they hope to choose a perfect travel plan based on various travel time and cost constraints before departure. In this study, railway passenger travel network is constructed based on train timetable. Both the generalized cost function we developed and the residual train capacity are considered to be the foundation of path searching procedure. The railway passenger travel network topology is analyzed based on residual train capacity. Considering the total travel time, the total travel cost, and the total number of passengers, we propose an optimal path searching algorithm based on residual train capacity in railway passenger travel network. Finally, the rationale of the railway passenger travel network and the optimal path generation algorithm are verified positively by case study.

The Dependence of Airport Profit on Passenger Satisfaction and Operational Efficiency

Directory of Open Access Journals (Sweden)

Roman Vokáč

2017-04-01

Full Text Available Since the airports are in fact commercial companies, their main objective is to make profit. Therefore, it is important for the airports to identify the business activities that may increase the income as well as those that may reduce the costs. The terminal process, handling the passengers’ baggage both on their departure and arrival, is a basic process at all airports that are intended for the commercial air transport. The quality of the terminal process provided by the airports has a significant impact on the passengers especially in terms of their satisfaction. In this text, the passenger satisfaction is regarded as a key factor of the terminal process affecting a whole range of other areas. Its high efficiency leads to cost reduction from the perspective of the airport. As it is proposed here, there is a connection between the passenger satisfaction and the process efficiency. For example, the queues that form due to the check-in process may be a result of the imbalance between the passenger arrival rate and the service rate. Therefore, there is a necessity of improving not only the passenger satisfaction but also the process efficiency.

[Injuries sustained by bus passengers in the municipality of Odense 1996-1999].

Science.gov (United States)

Barsi, T; Faergemann, C; Larsen, L B

2001-10-22

Owing to several recent bus-related accidents in Denmark, we wished to investigate injuries sustained by passengers. From our ongoing registration of patients treated in the casualty department at Odense University Hospital, we identified all residents of Odense Municipality who had sustained injuries as bus passengers from 1996 to 1999. Market analysis and demographic information were used to calculate the incidence and risk. Over this four-year period, 327 consecutive injuries had been sustained by 246 bus passengers, 72 men and 174 women, mean ages 44 and 53 years. The incidence rate was 3.3 injured per 10,000 inhabitants per year, with no increasing tendency during the study period. The risk was 2.2 injured per 1,000,000 bus passengers per year, highest in women and increasing with age. Injuries most frequently occurred when the bus stopped (31%), as passengers were boarding or alighting (23%), or during collision with another vehicle (20%). Most commonly injured areas were the lower (30%) and upper (28%) extremities and the head or neck (27%). Contusions and sprains were the most common injuries (59%). The most common fractures were those of the humerus and hip region. Bus passenger injuries are not a growing problem. The incidence increases with age.

Demand controlled ventilation in a bathroom

DEFF Research Database (Denmark)

Mortensen, Dorthe Kragsig; Nielsen, Toke Rammer; Topp, Claus

2008-01-01

consumption during periods where the demand for ventilation is low and poor indoor climate during periods where the demand for ventilation is high. Controlling the ventilation rate by demand can improve the energy performance of the ventilation system and the indoor climate. This paper compares the indoor...... climate and energy consumption of a Constant Air Volume (CAV) system and a Demand Controlled Ventilation (DCV) system for two different bathroom designs. The air change rate of the CAV system corresponded to 0.5h-1. The ventilation rate of the DCV system was controlled by occupancy and by the relative...

Passenger transportation problems of the public limited liability company “Lietuvos Geležinkeliai”

Directory of Open Access Journals (Sweden)

Stasys DAILYDKA

2009-01-01

Full Text Available The article provides an overview of passenger transportation on local and international routes by the Lithuanian railways. It identifies the reasons due to which passenger transportation has become increasingly loss-making. Also, factors that may encourage a greater number of people to travel by train are disclosed. The development of this sector up to 2030 is reviewed, i.e. a forecast for increasing the number of passengers, a perspective for the development of electric, diesel trains, passenger wagon fleet, and the levels of estimated investments are provided. It was established that after implementation of the measures envisaged, losses in the passenger transportation field could be cut by 2–3 times.

Simulation to assess the efficacy of US airport entry scrreening of passengers for pandemic influenza

Energy Technology Data Exchange (ETDEWEB)

Mcmahon, Benjamin [Los Alamos National Laboratory

2009-01-01

We present our methodology and stochastic discrete-event simulation developed to model the screening of passengers for pandemic influenza at the US port-of-entry airports. Our model uniquely combines epidemiology modelling, evolving infected states and conditions of passengers over time, and operational considerations of screening in a single simulation. The simulation begins with international aircraft arrivals to the US. Passengers are then randomly assigned to one of three states -- not infected, infected with pandemic influenza and infected with other respiratory illness. Passengers then pass through various screening layers (i.e. pre-departure screening, en route screening, primary screening and secondary screening) and ultimately exit the system. We track the status of each passenger over time, with a special emphasis on false negatives (i.e. passengers infected with pandemic influenza, but are not identified as such) as these passengers pose a significant threat as they could unknowingly spread the pandemic influenza virus throughout our nation.

Passenger Flow Forecasting Research for Airport Terminal Based on SARIMA Time Series Model

Science.gov (United States)

Li, Ziyu; Bi, Jun; Li, Zhiyin

2017-12-01

Based on the data of practical operating of Kunming Changshui International Airport during2016, this paper proposes Seasonal Autoregressive Integrated Moving Average (SARIMA) model to predict the passenger flow. This article not only considers the non-stationary and autocorrelation of the sequence, but also considers the daily periodicity of the sequence. The prediction results can accurately describe the change trend of airport passenger flow and provide scientific decision support for the optimal allocation of airport resources and optimization of departure process. The result shows that this model is applicable to the short-term prediction of airport terminal departure passenger traffic and the average error ranges from 1% to 3%. The difference between the predicted and the true values of passenger traffic flow is quite small, which indicates that the model has fairly good passenger traffic flow prediction ability.

The need for holding tracks at major intersections for synchronizing freight-train movements with fixed-headway passenger services; Wartegleisbedarf in Grossknoten fuer Synchronisation von Gueterverkehr mit vertaktetem Reiseverkehr

Energy Technology Data Exchange (ETDEWEB)

Mutschink, K. [DB Netz AG, Leipzig (Germany)

2005-05-01

Nearly all the big railway interesections have some facilities for passenger trains and others for freight trains. Most passenger trains today run according to fixed-headway timetables. Freight movements, on the other hand, are still basically need-driven with fluctuations in both timing and volumes. Handling both types of train as harmoniously as possible on shared lines calls for a combination of the meticulous planning of timetables and the correct dimensioning of the infrastructure. It is particularly in the vicinity of major intersections, where long-distance and local passenger trains (both with their fixed headways) converge within certain time windows, that approaching freight trains can only be effectively routed from their arrival lines to their departure lines if timing is properly synchronized. This may require the provision of a number of holding tracks for freight trains, and the essence of this article is how to compute that number using a procedure based on recognized scientific-management methods as applied to railways. This approach is centred on concepts such as certain 'no go' times for freight trains and the precise matching of train paths with the infrastructure. It does, however, take other parameters into account too, and these include the performance characteristics of each line (such as minimum headways), trains approaching ahead of their scheduled time and service constraints (such as ensuring connections and maintaining balanced intervals between passenger trains). The statistical appraisal, which is performed analytically, is designed to make sure that any results that are worked out are not slavishly dependent on the timetable, since (as mentioned above) freight movements in future will continue to be subject to fluctuations in volumes and timing. (orig.)

Passenger bus industry weather information application.

Science.gov (United States)

2011-03-21

Adverse weather significantly affects the United States national transportation system, including commercial companies : that rely on highways to support their enterprises. The Passenger Bus (Motorcoach) Industry (PBI) is one such affected : user who...

Reasons and remedies of inland passenger vessels accidents in Bangladesh

Science.gov (United States)

Rashid, Cdr Kaosar; Islam, Muhammad Rabiul

2017-12-01

The waterways are very important means of communication in Bangladesh. Every year over 95 million passengers are carried through this route. But, this important mode of transport is ridden with tragic disasters every year, incurring a heavy toll of human lives. In last twenty years (1994 to 2014), around 5,500 people have died and 1,500 gone missing in 658 launch disasters. The inland routes of Barisal, Bhola, Chandpur and Patuakhali and their connected water ways to Dhaka and Chittagong are found to be more accident prone. Lack of Awareness, boundless operation of unfit vessels, overloading of passengers, recruitment of unskilled crews, poor capacity of relevant bodies and low standard maintenance of Inland Water Transport (IWT) channels, poor weather forecasting, profit centered attitude of vessel owners and corruption are initiating these deadly accidents. Despite of a number of initiatives by the government, concerned departments and foreign consultants, the safety aspect of the inland passenger vessels still remains in dark. Combined effort of Department of Shipping, BIWTA, and the attitude of vessels owners as well as passengers are very essential in this respect.

A Study of Airline Passenger Susceptibility to Atmospheric Turbulence Hazard

Science.gov (United States)

Stewart, Eric C.

2000-01-01

A simple, generic, simulation math model of a commercial airliner has been developed to study the susceptibility of unrestrained passengers to large, discrete gust encounters. The math model simulates the longitudinal motion to vertical gusts and includes (1) motion of an unrestrained passenger in the rear cabin, (2) fuselage flexibility, (3) the lag in the downwash from the wing to the tail, and (4) unsteady lift effects. Airplane and passenger response contours are calculated for a matrix of gust amplitudes and gust lengths of a simulated mountain rotor. A comparison of the model-predicted responses to data from three accidents indicates that the accelerations in actual accidents are sometimes much larger than the simulated gust encounters.

Customers' expectations of complaint handling by airline service: privilege status and reasonability of demands from a social learning perspective.

Science.gov (United States)

Chiou, Wen-Bin; Chang, Ming-Hsu; Yang, Chao-Chin

2009-04-01

In the airline industry, membership and cabin class are noticeable servicescape features of customers' privilege status. Customers may learn that higher privilege customers are more desired and endured by the airline. From the customers' point of view, those with higher privilege may expect their demands to be complied with when they complain. The present study employed hypothetical scenarios to investigate how the privilege status of passengers and reasonability of their demands influenced their expectations toward the compliance of airline personnel. Analysis showed that higher privilege customers were more likely to expect airline personnel to comply with their demands. Moreover, participants with medium or high levels of privilege status had greater expectations of compliance even when demands were unreasonable. In sum, customer expectations toward complaint handling reflected predictions based on social learning.

Models for Train Passenger Forecasting of Java and Sumatra

Science.gov (United States)

Sartono

2017-04-01

People tend to take public transportation to avoid high traffic, especially in Java. In Jakarta, the number of railway passengers is over than the capacity of the train at peak time. This is an opportunity as well as a challenge. If it is managed well then the company can get high profit. Otherwise, it may lead to disaster. This article discusses models for the train passengers, hence, finding the reasonable models to make a prediction overtimes. The Box-Jenkins method is occupied to develop a basic model. Then, this model is compared to models obtained using exponential smoothing method and regression method. The result shows that Holt-Winters model is better to predict for one-month, three-month, and six-month ahead for the passenger in Java. In addition, SARIMA(1,1,0)(2,0,0) is more accurate for nine-month and twelve-month oversee. On the other hand, for Sumatra passenger forecasting, SARIMA(1,1,1)(0,0,2) gives a better approximation for one-month ahead, and ARIMA model is best for three-month ahead prediction. The rest, Trend Seasonal and Liner Model has the least of RMSE to forecast for six-month, nine-month, and twelve-month ahead.

Passenger choice attributes in choosing a secondary airport: A study of passenger attributes in using Lanseria International Airport

Directory of Open Access Journals (Sweden)

Elmarie Kriel

2016-11-01

Full Text Available Background: The economic deregulation of the airline industry in South Africa in 1991 was a landmark event and brought about various changes in the air transport market, both locally and internationally. One important after-effect of deregulation was the entry of low-cost carriers (LCCs in 2001, which increased competition in the market and offered passengers the freedom to choose between full-cost carriers and LCCs. It is generally accepted that LCCs have been very successful across the globe, and the main reason for this lies in their simplified lower cost business models. One way of achieving lower costs is for LCCs to operate from secondary or alternative airports. This trend is observed in most regions of the world. In South Africa, and more specifically the Gauteng province, Lanseria International Airport is considered as an alternative airport to OR Tambo International Airport (the main international airport of South Africa and located about 30 km east of the Johannesburg Central Business District [CBD]. Currently, two LCCs operate from this airport with a third LCC airline indicating that it will shortly begin operations from this airport. Objectives: The research presented here reflects on the aspects passengers consider when selecting a secondary airport for their travel needs. It also compares the research findings of passenger attributes when choosing Lanseria Airport as a secondary airport in 2010 to a similar study in 2013 after another LCC commenced operations from the airport. Method: In this exploratory research a face-to-face survey was used as the quantitative data collection method in order to identify the factors that influenced passengers’ airport choice decisions at Lanseria International Airport. Results: From this research it emerged that when airports in a metropolitan area are close to one another, one of the main considerations for passengers is access time when selecting an airport. Even after a second LCC started

Passenger Rail Car Egress -- TRB Workshop

Science.gov (United States)

2011-11-01

The Federal Railroad Administrations (FRA) Office of Railroad Policy and Development is exploring how to enhance regulations that address the safe, timely, and effective emergency evacuation of occupants from passenger rail vehicles in various eme...

Strategic Insights. Volume 10, Issue 2, Summer 2011

Science.gov (United States)

2011-06-01

messages to demand the “tax” began to include a personal reference code for each “ client ,” illustrating the efficiency of its financing and...Alasdair M. (Eds.), Contemporary Research on Terrorism (Aberdeen: Aberdeen UP, 1987): 121-129. San Martín, José Ignacio, Servicio especial. A las órdenes...11 Elaborating, Haddad explained that the main idea was to hijack an El Al airliner and to hold its passengers and crew hostage. Haddad claimed that

Energy Use of Passenger Cars

DEFF Research Database (Denmark)

Jørgensen, Kaj

1998-01-01

Analysis of the Danish sale and stock of passenger cars, focusing particularly on aspects influencing energy use. The project has tracked the development of vehicle weight, power and fuel economy for both the sale of new cars (from 1980 to 1997)and the stock. In addition, the energy use...

HRTPO strategic campaign and vision plan for passenger rail : phase 1 overview.

Science.gov (United States)

2010-03-17

SUBJECT: : TEMS (Transportation Economics & Management Systems, Inc.), the consultant specializing in : passenger rail planning, was secured by the HRTPO and its partner DRPT to evaluate the potential : passenger rail service alternative defined by t...

Rail industry job analysis : passenger conductor.

Science.gov (United States)

2013-02-01

This document describes the results of a job analysis that was conducted for the position of railroad Passenger Conductor. Key aspects of the position were identified, including main tasks and knowledge, skills, abilities, and other characteristics (...

How to mix per-flight and per-passenger based airport charges

NARCIS (Netherlands)

Czerny, A.I.; Zhang, A.

2015-01-01

This paper investigates the questions of why carriers advocate for higher per-passenger airport charges and lower per-flight charges, and whether and when this proposal is welfare-enhancing. Specifically, the paper compares the optimal mix of per-flight and per-passenger based airport charges from

A statistical mechanics model for free-for-all airplane passenger boarding

Science.gov (United States)

Steffen, Jason H.

2008-12-01

I discuss a model for free-for-all passenger boarding which is employed by some discount air carriers. The model is based on the principles of statistical mechanics, where each seat in the aircraft has an associated energy which reflects the preferences of travelers. As each passenger enters the airplane they select their seats using Boltzmann statistics, proceed to that location, load their luggage, sit down, and the partition function seen by remaining passengers is modified to reflect this fact. I discuss the various model parameters and make qualitative comparisons of this passenger boarding model with those that involve assigned seats. The model can be used to predict the probability that certain seats will be occupied at different times during the boarding process. These results might provide a useful description of this boarding method. The model is a relatively unusual application of undergraduate level physics and describes a situation familiar to many students and faculty.

A statistical mechanics model for free-for-all airplane passenger boarding

International Nuclear Information System (INIS)

Steffen, Jason H.; Fermilab

2008-01-01

I discuss a model for free-for-all passenger boarding which is employed by some discount air carriers. The model is based on the principles of statistical mechanics where each seat in the aircraft has an associated energy which reflects the preferences of travelers. As each passenger enters the airplane they select their seats using Boltzmann statistics, proceed to that location, load their luggage, sit down, and the partition function seen by remaining passengers is modified to reflect this fact. I discuss the various model parameters and make qualitative comparisons of this passenger boarding model with those that involve assigned seats. The model can be used to predict the probability that certain seats will be occupied at different times during the boarding process. These results might provide a useful description of this boarding method. The model is a relatively unusual application of undergraduate level physics and describes a situation familiar to many students and faculty

A statistical mechanics model for free-for-all airplane passenger boarding

Energy Technology Data Exchange (ETDEWEB)

Steffen, Jason H.; /Fermilab

2008-08-01

I discuss a model for free-for-all passenger boarding which is employed by some discount air carriers. The model is based on the principles of statistical mechanics where each seat in the aircraft has an associated energy which reflects the preferences of travelers. As each passenger enters the airplane they select their seats using Boltzmann statistics, proceed to that location, load their luggage, sit down, and the partition function seen by remaining passengers is modified to reflect this fact. I discuss the various model parameters and make qualitative comparisons of this passenger boarding model with those that involve assigned seats. The model can be used to predict the probability that certain seats will be occupied at different times during the boarding process. These results might provide a useful description of this boarding method. The model is a relatively unusual application of undergraduate level physics and describes a situation familiar to many students and faculty.

Computational Fluid Dynamic Analysis of Enhancing Passenger Cabin Comfort Using PCM

Science.gov (United States)

Purusothaman, M.; Valarmathi, T. N.; Dada Mohammad, S. K.

2016-09-01

The main purpose of this study is to determine a cost effective way to enhance passenger cabin comfort by analyzing the effect of solar radiation of a open parked vehicle, which is exposed to constant solar radiation on a hot and sunny day. Maximum heat accumulation occurs in the car cabin due to the solar radiation. By means of computational fluid dynamics (CFD) analysis, a simulation process is conducted for the thermal regulation of the passenger cabin using a layer of phase change material (PCM) on the roof structure of a stationary car when exposed to ambient temperature on a hot sunny day. The heat energy accumulated in the passenger cabin is absorbed by a layer of PCM for phase change process. The installation of a ventilation system which uses an exhaust fan to create a natural convection scenario in the cabin is also considered to enhance passenger comfort along with PCM.

14 CFR 382.133 - What are the requirements concerning the evaluation and use of passenger-supplied electronic...

Science.gov (United States)

2010-01-01

... evaluation and use of passenger-supplied electronic devices that assist passengers with respiration in the... What are the requirements concerning the evaluation and use of passenger-supplied electronic devices... to use in the passenger cabin during air transportation, a ventilator, respirator, continuous...

Relieving the Impact of Transit Signal Priority on Passenger Cars through a Bilevel Model

Directory of Open Access Journals (Sweden)

Ding Wang

2017-01-01

Full Text Available Transit signal priority (TSP is an effective control strategy to improve transit operations on the urban network. However, the TSP may sacrifice the right-of-way of vehicles from side streets which have only few transit vehicles; therefore, how to minimize the negative impact of TSP strategy on the side streets is an important issue to be addressed. Concerning the typical mixed-traffic flow pattern and heavy transit volume in China, a bilevel model is proposed in this paper: the upper-level model focused on minimizing the vehicle delay in the nonpriority direction while ensuring acceptable delay variation in transit priority direction, and the lower-level model aimed at minimizing the average passenger delay in the entire intersection. The parameters which will affect the efficiency of the bilevel model have been analyzed based on a hypothetical intersection. Finally, a real-world intersection has been studied, and the average vehicle delay in the nonpriority direction decreased 11.28 s and 22.54 s (under different delay variation constraint compared to the models that only minimize average passenger delay, while the vehicle delay in the priority direction increased only 1.37 s and 2.87 s; the results proved the practical applicability and efficiency of the proposed bilevel model.

Drivers' attitudes toward front or rear child passenger belt use and seat belt reminders at these seating positions.

Science.gov (United States)

Kidd, David G; McCartt, Anne T

2014-01-01

Passengers, especially those in rear seating positions, use seat belts less frequently than drivers. In-vehicle technology can inform drivers when their passengers are unbuckled and encourage passengers to use belts. The current study collected information about drivers' attitudes toward passenger belt use and belt reminders for front passengers and children in back seats. A national telephone survey of 1218 people 18 and older was conducted, of which 477 respondents were drivers who transport a front seat passenger at least once a week and 254 were drivers who transport an 8- to 15-year-old child in the back seat. Respondents were asked about their attitudes toward belt use by their front passengers or rear child passengers and preferences for different passenger belt reminder features. Ninety percent of drivers who regularly transport front seat passengers said that the passengers always use seat belts. Reported belt use was even higher among 8- to 15-year-old children in the back seat (97%). Among the drivers whose children do not always buckle up, about half said their child unbuckled the belt during the trip. Almost every full-time belt use driver (96%) would encourage front passengers to buckle up if not belted, compared to 57 percent of part-time belt users and nonusers. In contrast, nearly every driver who transports children in the back seat would encourage their belt use, regardless of the driver's belt use habits. Most drivers who transport front passengers wanted passenger belt reminders to encourage passengers to buckle up. Most of these drivers wanted a chime/buzzer or warning light or text display and wanted the reminder to last indefinitely. Most drivers who transport child passengers in the rear seat wanted the vehicle to indicate whether child passengers are unbuckled. A large majority of these drivers wanted notifications via a visual diagram of seating positions and belt use, a chime/buzzer, and a warning light or text display. These drivers

Short-term exposure to PM 10, PM 2.5, ultrafine particles and CO 2 for passengers at an intercity bus terminal

Science.gov (United States)

Cheng, Yu-Hsiang; Chang, Hsiao-Peng; Hsieh, Cheng-Ju

2011-04-01

The Taipei Bus Station is the main transportation hub for over 50 bus routes to eastern, central, and southern Taiwan. Daily traffic volume at this station is about 2500 vehicles, serving over 45,000 passengers daily. The station is a massive 24-story building housing a bus terminal, a business hotel, a shopping mall, several cinemas, offices, private residential suites, and over 900 parking spaces. However, air quality inside this bus terminal is a concern as over 2500 buses are scheduled to run daily. This study investigates the PM 10, PM 2.5, UFP and CO 2 levels inside and outside the bus terminal. All measurements were taken between February and April 2010. Measurement results show that coarse PM inside the bus terminal was resuspended by the movement of large numbers of passengers. The fine and ultrafine PM in the station concourse were from outside vehicles. Moreover, fine and ultrafine PM at waiting areas were exhausted directly from buses in the building. The CO 2 levels at waiting areas were likely elevated by bus exhaust and passengers exhaling. The PM 10, PM 2.5 and CO 2 levels at the bus terminal were lower than Taiwan's EPA suggested standards for indoor air quality. However, UFP levels at the bus terminal were significantly higher than those in the urban background by about 10 times. Therefore, the effects of UFPs on the health of passengers and workers must be addressed at this bus terminal since the levels of UFPs are higher than >1.0 × 10 5 particles cm -3.

Passengers, Participants, Partners and Practitioners. Working with Risk To Empower Groups.

Science.gov (United States)

Brown, Heather

2000-01-01

Participant responsibility in outdoor education programs is placed on a continuum from passenger status through participant and partner to practitioner. Corresponding leader roles are directive, coaching, supporting, and delegating. The disempowering effects of the passenger approach to risk management and the value of teaching a group to manage…

An Optimization Method of Passenger Assignment for Customized Bus

OpenAIRE

Yang Cao; Jian Wang

2017-01-01

This study proposes an optimization method of passenger assignment on customized buses (CB). Our proposed method guarantees benefits to passengers by balancing the elements of travel time, waiting time, delay, and economic cost. The optimization problem was solved using a Branch and Bound (B&B) algorithm based on the shortest path for the selected stations. A simulation-based evaluation of the proposed optimization method was conducted. We find that a CB service can save 38.33% in average tra...

77 FR 25105 - Reporting of Ancillary Airline Passenger Revenues

Science.gov (United States)

2012-04-27

...This document announces a public meeting on a Notice of Proposed Rulemaking (NPRM) issued on July 15, 2011. The NPRM proposed changes regarding reporting of airline ancillary passenger revenues, computation of mishandled baggage rates, and collection of separate statistics for mishandled wheelchairs and scooters used by passengers with disabilities. During the public meeting, DOT staff will provide a summary of the proposals in the NPRM and seek input on costs and benefits associated with the implementation of the proposals.

Drastic population fluctuations explain the rapid extinction of the passenger pigeon.

Science.gov (United States)

Hung, Chih-Ming; Shaner, Pei-Jen L; Zink, Robert M; Liu, Wei-Chung; Chu, Te-Chin; Huang, Wen-San; Li, Shou-Hsien

2014-07-22

To assess the role of human disturbances in species' extinction requires an understanding of the species population history before human impact. The passenger pigeon was once the most abundant bird in the world, with a population size estimated at 3-5 billion in the 1800s; its abrupt extinction in 1914 raises the question of how such an abundant bird could have been driven to extinction in mere decades. Although human exploitation is often blamed, the role of natural population dynamics in the passenger pigeon's extinction remains unexplored. Applying high-throughput sequencing technologies to obtain sequences from most of the genome, we calculated that the passenger pigeon's effective population size throughout the last million years was persistently about 1/10,000 of the 1800's estimated number of individuals, a ratio 1,000-times lower than typically found. This result suggests that the passenger pigeon was not always super abundant but experienced dramatic population fluctuations, resembling those of an "outbreak" species. Ecological niche models supported inference of drastic changes in the extent of its breeding range over the last glacial-interglacial cycle. An estimate of acorn-based carrying capacity during the past 21,000 y showed great year-to-year variations. Based on our results, we hypothesize that ecological conditions that dramatically reduced population size under natural conditions could have interacted with human exploitation in causing the passenger pigeon's rapid demise. Our study illustrates that even species as abundant as the passenger pigeon can be vulnerable to human threats if they are subject to dramatic population fluctuations, and provides a new perspective on the greatest human-caused extinction in recorded history.

Modeling of passengers' safety perception for buses on mountainous roads.

Science.gov (United States)

Khoo, Hooi Ling; Ahmed, Muaid

2018-04-01

This study had developed a passenger safety perception model specifically for buses taking into consideration the various factors, namely driver characteristics, environmental conditions, and bus characteristics using Bayesian Network. The behaviour of bus driver is observed through the bus motion profile, measured in longitudinal, lateral, and vertical accelerations. The road geometry is recorded using GPS and is computed with the aid of the Google map while the perceived bus safety is rated by the passengers in the bus in real time. A total of 13 variables were derived and used in the model development. The developed Bayesian Network model shows that the type of bus and the experience of the driver on the investigated route could have an influence on passenger's perception of their safety on buses. Road geometry is an indirect influencing factor through the driver's behavior. The findings of this model are useful for the authorities to structure an effective strategy to improve the level of perceived bus safety. A high level of bus safety will definitely boost passenger usage confidence which will subsequently increase ridership. Copyright © 2018 Elsevier Ltd. All rights reserved.

Inferring Passenger Denial Behavior of Taxi Drivers from Large-Scale Taxi Traces.

Directory of Open Access Journals (Sweden)

Sihai Zhang

Full Text Available How to understand individual human actions is a fundamental question to modern science, which drives and incurs many social, technological, racial, religious and economic phenomena. Human dynamics tries to reveal the temporal pattern and internal mechanism of human actions in letter or electronic communications, from the perspective of continuous interactions among friends or acquaintances. For interactions between stranger to stranger, taxi industry provide fruitful phenomina and evidence to investigate the action decisions. In fact, one striking disturbing events commonly reported in taxi industry is passenger refusing or denial, whose reasons vary, including skin color, blind passenger, being a foreigner or too close destination, religion reasons and anti specific nationality, so that complaints about taxi passenger refusing have to be concerned and processed carefully by local governments. But more universal factors for this phenomena are of great significance, which might be fulfilled by big data research to obtain novel insights in this question. In this paper, we demonstrate the big data analytics application in revealing novel insights from massive taxi trace data, which, for the first time, validates the passengers denial in taxi industry and estimates the denial ratio in Beijing city. We first quantify the income differentiation facts among taxi drivers. Then we find out that choosing the drop-off places also contributes to the high income for taxi drivers, compared to the previous explanation of mobility intelligence. Moreover, we propose the pick-up, drop-off and grid diversity concepts and related diversity analysis suggest that, high income taxi drivers will deny passengers in some situations, so as to choose the passengers' destination they prefer. Finally we design an estimation method for denial ratio and infer that high income taxi drivers will deny passengers with 8.52% likelihood in Beijing. Our work exhibits the power of big

Passenger train emergency systems : development of prototype railEXODUS software for U.S. passenger rail car egress.

Science.gov (United States)

2014-11-01

The Federal Railroad Administration (FRA), U.S. Department of Transportation (U.S. DOT), is sponsoring a research program, which includes investigation of the applicability of time-based egress performance requirements to U.S. passenger rail cars. Th...

Motorcycle crashes potentially preventable by three crash avoidance technologies on passenger vehicles.

Science.gov (United States)

Teoh, Eric R

2018-07-04

The objective of this study was to identify and quantify the motorcycle crash population that would be potential beneficiaries of 3 crash avoidance technologies recently available on passenger vehicles. Two-vehicle crashes between a motorcycle and a passenger vehicle that occurred in the United States during 2011-2015 were classified by type, with consideration of the functionality of 3 classes of passenger vehicle crash avoidance technologies: frontal crash prevention, lane maintenance, and blind spot detection. Results were expressed as the percentage of crashes potentially preventable by each type of technology, based on all known types of 2-vehicle crashes and based on all crashes involving motorcycles. Frontal crash prevention had the largest potential to prevent 2-vehicle motorcycle crashes with passenger vehicles. The 3 technologies in sum had the potential to prevent 10% of fatal 2-vehicle crashes and 23% of police-reported crashes. However, because 2-vehicle crashes with a passenger vehicle represent fewer than half of all motorcycle crashes, these technologies represent a potential to avoid 4% of all fatal motorcycle crashes and 10% of all police-reported motorcycle crashes. Refining the ability of passenger vehicle crash avoidance systems to detect motorcycles represents an opportunity to improve motorcycle safety. Expanding the capabilities of these technologies represents an even greater opportunity. However, even fully realizing these opportunities can affect only a minority of motorcycle crashes and does not change the need for other motorcycle safety countermeasures such as helmets, universal helmet laws, and antilock braking systems.

The effect of extended periodic inspection of passenger cars and vans

DEFF Research Database (Denmark)

Pilegaard, Ninette; Bernhoft, Inger Marie

The purpose of this note is to perform a calculation of the costs and benefits of extended period-ic inspection of passenger cars and vans in Denmark, provided that the first inspection of pas-senger cars and vans is performed after four years, then one inspection after two years and thereafter...

An observational comparison of the older and younger bus passenger experience in a developing world city.

Science.gov (United States)

Aceves-González, Carlos; May, Andrew; Cook, Sharon

2016-06-01

This study was an unobtrusive observational analysis of 333 older and younger bus passengers in Guadalajara, Mexico. A set of data were collected for each observed passenger, as well as more general observations related to driver behaviour, bus design and bus service characteristics. There were significant differences between older and younger passengers in terms of boarding and alighting times, use of handrails, seat location preferences, passenger stability and coping strategies in order to maintain postural stability. The conditions of travel are conducive to a poor passenger experience for the older passengers in particular. Although the problems may be attributed to bus design and driver behaviour typical of that in developing countries, they are also influenced by the wider transport infrastructure, and a lack of a regulatory regime which places drivers under time pressure and in direct competition with each other. Practitioner Summary: Bus services must cater for all ages of passengers, including the elderly. This unobtrusive observational study investigated the passenger experience in a developing world city. Bus and wider service design were found to compromise the journey experience, with the older users being particularly negatively impacted. Design recommendations are provided.

77 FR 24381 - Security Zone; Passenger Vessel SAFARI EXPLORER Arrival/Departure, Kaunakakai Harbor, Molokai, HI

Science.gov (United States)

2012-04-24

...-AA87 Security Zone; Passenger Vessel SAFARI EXPLORER Arrival/ Departure, Kaunakakai Harbor, Molokai, HI... channel's entrance during the arrival and departure of the Passenger Vessel Safari Explorer in Kaunakakai... entrance during the arrival and departure of the Passenger Vessel Safari Explorer in Kaunakakai Harbor...

Influence of Unsteady Aerodynamics on Driving Dynamics of Passenger Cars

OpenAIRE

Huemer, J.; Stickel, T.; Sagan, E.; Schwarz, M.; Wall, W.A.

2015-01-01

Recent approaches towards numerical investigations with CFD-Methods on unsteady aerodynamic loads of passenger cars identified major differences compared to steady state aerodynamic excitations. Furthermore innovative vehicle concepts like electric-vehicles or hybrid drives further challenge the basic layout of passenger cars. Therefore the relevance of unsteady aerodynamic loads on cross-wind stability of changing basic vehicle architectures should be analysed. In order to assure and improve...

High Speed Vessels to Market : Comparative Case Studies in the Passenger Trade

Science.gov (United States)

2001-08-01

The Volpe Center chose to study several existing catamarans and high speed monohulls in comparison to representative SWATH family craft, including the SLICE 400 (passenger) and SLICE 600 (passenger/90 car) variants, the former similar in size and per...

Role of mobile passenger lymphocytes in the rejection of renal and cardiac allografts in the rat. A passenger lymphocyte-mediated graft-versus-host reaction amplifies the host response

International Nuclear Information System (INIS)

van Vrieshilfgaarde, R.; Hermans, P.; Terpstra, J.L.; van Breda Viresman, P.J.

1980-01-01

It is demonstrated that passenger lymphocytes migrate out of rat renal allografts into host spleens in a radioresistant fashion. These mobile passenger lymphocytes within BN kidney and heart transplants are immunocompetent, since they elicit a graft-versus-host (GVH) reaction in the spleens of (LEW x BN)F2 hybrid hosts. The greater GVH reaction in (LEW x BN)F1 recipients of BN kidneys reflects the greater number of mobile passenger lymphocytes in the kidney when compared to the heart. The mobile passenger lymphocytes within BN renal allografts also cause a proliferative response in the spleens of the LEW hosts as well as an accelerated rejection of BN renal allografts when compared to BN cardiac allografts, for the differences between BN kidney and heart, both in terms of splenomegaly elicited in LEW as well as tempo of rejection, are abolished by total body x-irradiation of the donor with 900 rad. Results indicate that a mobile passenger lymphocyte mediated GVH reaction in the central lymphoid organs of the host augments the host response to allogenic kidneys and contributes materially to first-set renal allograft rejection; this GVH reaction on the other hand is not conspicuously present in LEW recipients of BN cardiac allografts and has therefore little effect on first-set cardiac allograft rejection

Experimental verification of numerical calculations of railway passenger seats

Science.gov (United States)

Ligaj, B.; Wirwicki, M.; Karolewska, K.; Jasińska, A.

2018-04-01

The construction of railway seats is based on industry regulations and the requirements of end users, i.e. passengers. The two main documents in this context are the UIC 566 (3rd Edition, dated 7 January 1994) and the EN 12663-1: 2010+A1:2014. The study was to carry out static load tests of passenger seat frames. The paper presents the construction of the test bench and the results of experimental and numerical studies of passenger seat rail frames. The test bench consists of a frame, a transverse beam, two electric cylinders with a force value of 6 kN, and a strain gauge amplifier. It has a modular structure that allows for its expansion depending on the structure of the seats. Comparing experimental results with numerical results for points A and B allowed to determine the existing differences. It follows from it that higher stress values are obtained by numerical calculations in the range of 0.2 MPa to 35.9 MPa.

CONCERNING THE PROBLEM OF SEMANTIC CONTRADICTIONS ARISING WHEN USING THE TERMS “INTERMODAL” AND “MULTIMODAL” PASSENGER CARRIAGES

Directory of Open Access Journals (Sweden)

Norayr Oganesovich Bludyan

2017-05-01

Full Text Available This article examines Russian and foreign regulatory documents, concerning the issues of intermodal/multimodal passenger carriages, shows the essence of intermodal transportation in passenger transport, includes the analysis of various approaches to the concepts of “intermodal passenger transportations” and “multimodal passenger transportations” and contains proposals for legislative consolidation of the mentioned terms and for the implementation of intermodal technologies in passenger transport.

Passenger oriented railway disruption management by adapting timetables and rolling stock schedules

NARCIS (Netherlands)

Veelenturf, L.P.; Kroon, L.G.; Maróti, G.

2017-01-01

In passenger railway operations, unforeseen events require railway operators to adjust their timetable and their resource schedules. The passengers will also adapt their routes to their destinations. When determining the new timetable and rolling stock schedule, the railway operator has to take

Statistical analysis of passenger-crowding in bus transport network of Harbin

Science.gov (United States)

Hu, Baoyu; Feng, Shumin; Li, Jinyang; Zhao, Hu

2018-01-01

Passenger flow data is indispensable but rare in the study of public transport networks. In this study, we focus on the passenger-crowding characteristics of the bus transport network of Harbin (BTN-H) based on passenger flow investigation. The three frequency histograms for all the uplinks and downlinks in Harbin are presented, including passengers on the bus at each section, crowding coefficients, and position parameters of crowded sections. The differences in crowding position are analyzed on each route. The distributions of degree and crowding degree (in directed space L) follow an exponential law. The new finding indicates that there are many stations with few crowded sections and a few stations with many crowded sections. The distributions of path length and crowded length (in directed space P) are presented based on the minimum transfer times, and it is found that they can be fitted by a composite Gaussian function and a Gaussian function, respectively. The stations and paths can be divided into three crowd levels. We conclude that BTN-H is crowded from a network-based perspective.

Disruption Management in Passenger Railway Transportation

DEFF Research Database (Denmark)

Groth, Julie Jespersen; Potthoff, Daniel; Clausen, Jens

2009-01-01

This paper deals with disruption management in passenger railway transportation. In the disruption management process, many actors belonging to different organizations play a role. In this paper we therefore describe the process itself and the roles of the different actors. Furthermore, we discuss...

Effects on traffic of a magnetic levitation system Frankfurt -96 Paris

Energy Technology Data Exchange (ETDEWEB)

Schmitt, A; Keimel, H; Wuerdemann, G; Halten, W

1982-01-01

The study is based on an analysis and forecast of the volume and structure of passenger travel in the region under consideration for a situation without a Maglev system. For the case with a Maglev line Frankfurt-Paris, both the substitutional effects of this system on the travel demand of aeroplane, train and car and the newly generated traffic are estimated. As a result for 1990 a total of 6.6 million passenger trips per year on the Maglev system is expected, most of these (c. 60%) coming from original passenger train traffic. On account of feeder services to the Maglev system, demand for the existing rail system (in passenger kilometers) is diminished by only 20%. 15-20% of the total demand for the Maglev system between Frankfurt and Paris is estimated to originate from O-D-air-travel in the corridor (which is supposed to be totally substitutionable) and another 10-15% both from substituted car travel and from newly generated travel. Balances are struck for travel cost, travel time, and trip kilometers spent in the without- and with-case. Sensitivity analysis have been carried out for supply variants of the Maglev system and the classic rail system. Beside the study method there are some statements regarding inspected travel market shares which are supposed to be transferable to other planning cases.

Regional disparity of urban passenger transport associated GHG (greenhouse gas) emissions in China: A review

International Nuclear Information System (INIS)

Hao, Han; Geng, Yong; Wang, Hewu; Ouyang, Minggao

2014-01-01

With China’s urbanization and motorization, greenhouse gas (GHG) emissions from urban passenger transport increased rapidly over recent years. As we estimated, China’s urban passenger transport associated motorized travel, energy consumption and lifecycle GHG emissions reached 2815 billion passenger kilometers (pkm), 77 million tons of oil equivalent (toe) and 335 million ton CO 2 equivalent in 2010, over half of which were located in eastern provinces. Over national level, GHG emissions by private passenger vehicles, business passenger vehicles, taxis, motorcycles, E-bikes, transit buses and urban rails accounted for 57.7%, 13.0%, 7.7%, 8.6%, 1.8%, 10.5% and 0.7% of the total. Significant regional disparity was observed. The province-level per capita GHG emissions ranged from 285 kg/capita in Guizhou to 1273 kg/capita in Beijing, with national average of 486 kg/capita. Depending on province context and local policy orientation, the motorization pathways of China’s several highest motorized provinces are quite diverse. We concluded that motorization rate and transport structure were the substantial factors determining urban passenger transport associated GHG emissions. Considering the great potential of urban passenger transport growth in China, policies guiding the optimization of transport structure should be in place with priority in eastern provinces. - Highlights: • Province-leveled motorized travel, energy consumption and GHG emissions in China were studied. • Significant regional disparities on urban passenger transport were observed. • Region-specific sustainable transport energy policies were discussed

ANALYTICAL AND SIMULATION PLANNING MODEL OF URBAN PASSENGER TRANSPORT

Directory of Open Access Journals (Sweden)

Andrey Borisovich Nikolaev

2017-09-01

Full Text Available The article described the structure of the analytical and simulation models to make informed decisions in the planning of urban passenger transport. Designed UML diagram that describes the relationship of classes of the proposed model. A description of the main agents of the model developed in the simulation AnyLogic. Designed user interface integration with GIS map. Also provides simulation results that allow concluding about her health and the possibility of its use in solving planning problems of urban passenger transport.

Decision on risk-averse dual-channel supply chain under demand disruption

Science.gov (United States)

Yan, Bo; Jin, Zijie; Liu, Yanping; Yang, Jianbo

2018-02-01

We studied dual-channel supply chains using centralized and decentralized decision-making models. We also conducted a comparative analysis of the decisions before and after demand disruption. The study shows that the amount of change in decision-making is a linear function of the amount of demand disruption, and it is independent of the risk-averse coefficient. The optimal sales volume decision of the disturbing supply chain is related to market share and demand disruption in the decentralized decision-making model. The optimal decision is only influenced by demand disruption in the centralized decision-making model. The stability of the sales volume of the two models is related to market share and demand disruption. The optimal system production of the two models shows robustness, but their stable internals are different.

CONCEPT OF THE MINIMUM ENERGY PASSENGER CAR WITH USE OF UNCONVENTIONAL ENERGY SOURCES

Directory of Open Access Journals (Sweden)

V. A. Gabrinets

2014-06-01

Full Text Available Purpose. The paper is aimed to consider the concept of creation of the minimum energy passenger car with use of nonconventional energy sources and the walls that have enhanced thermal insulation properties. Мethodology. The types of heat losses, as well as their value were analyzed. The alternative sources of energy are considered for heating. Their potential contribution to the overall energy balance of the passenger car is analyzed. Impact on the car design of the enhanced wall thermal insulation, solar energy inflow through the transparent windows and energy release of passengers are quantitatively evaluated. Findings. With the maximum possible use of all unconventional energy sources and the rational scheme solutions of conditioning and heating systems energy the costs for these needs for a passenger car can be reduced by 40-50%. Originality. New types of energy to maintain the heat balance of the car in the winter period is proposed to use firstly. New schematics solutions for environmental control system of the car both in winter and in summer periods were offered. Practical value. Introduction of the proposed scheme solutions and approaches to ensure the comfortable conditions for passengers may be implemented on an existing park of passenger cars and do not require a major re-equipment of systems that have already been installed.

14 CFR 399.32 - Zone of limited suspension for domestic passenger fares.

Science.gov (United States)

2010-01-01

... TRANSPORTATION (AVIATION PROCEEDINGS) POLICY STATEMENTS STATEMENTS OF GENERAL POLICY Policies Relating to Rates and Tariffs § 399.32 Zone of limited suspension for domestic passenger fares. (a) Applicability. This section sets forth the Board's policy on passenger fares for scheduled service by certificated air...

Analysis of network-wide transit passenger flows based on principal component analysis

NARCIS (Netherlands)

Luo, D.; Cats, O.; van Lint, J.W.C.

2017-01-01

Transit networks are complex systems in which the passenger flow dynamics are difficult to capture and understand. While there is a growing ability to monitor and record travelers' behavior in the past decade, knowledge on network-wide passenger flows, which are essentially high-dimensional

The Cognitive Demands of Writing

NARCIS (Netherlands)

Torrance, Mark; Jeffery, Gaynor

1999-01-01

Writing is a complex activity that places demands on cognitive resources. This volume presents original theory and research exploring the ways in which the sub-components of the writing process (generating and organizing content, producing grammatical sentences, etc.) differ in their cognitive

Simulation of storage performance on hydropneumatic driveline in dual hybrid hydraulic passenger car

Directory of Open Access Journals (Sweden)

Wasbari Faizil

2017-01-01

Full Text Available The charging process is one of the critical processes in the hydro-pneumatic driveline storage system. It converts the kinetic energy of the vehicle braking and coasting to the compression energy. This energy is stored in the storage device called the accumulator. The system is planned to be used on the dual hydro-pneumatic hybrid driveline and applied to a hydraulic hybrid passenger car. The aim of this paper is to find the effect of charging parameters on the storage performance through simulation. Through the storage behaviour, the desirable and optimal sizing of the accumulator can be selected. The paper emphasized on the effect of pressure elevation, pre-charge pressure, effective volume, thermal reaction and required time of the accumulator’s charging process. The circuit of charging process has been designed and simulated by using the hydraulic tool in the Automation Studio software. The simulation results were corroborated through the component specification for data rationality. Through the simulation, it was found that pre-charge pressure had a significant effect on the charging process. It determined the efficiency of the effective volume. The higher the pressure elevation, the higher the effective volume. Nevertheless, the more energy required to compress the nitrogen gas in the bladder. Besides, in term of volume displacement, higher volume displacement reduced charging time and lower the fluid temperature. The simulation had been positively highlighted the critical point in charging process which later on, benefited the sizing process in the component selection specification.

Efficiency improvement of transport service by trolley buses based on the levels of their power demand

Directory of Open Access Journals (Sweden)

V. V. Aulin

2014-12-01

Full Text Available Purpose. Use efficiency improvement of trolley buses in passenger traffic based on power levels of electric energy input and terms adjustment of their maintenance. Methodology. In order to achieve this goal conformance of electric energy input by trolleybus to the transported amount of passengers taking into account characteristics of the route is offered to establish. The major indicators of the trolleybus operation are: speed of a race on lines, number of tractive motor firing, voltage and amperage in the network that were taken with accountants from a dashboard. Research results were tabulated and recorded with DVR. Along with the study of power consumption of electric energy input by a trolleybus passenger count was carried out too. Findings. The directly proportional dependence between the level of energy consumption by a trolleybus and the number of passengers for constant performance route was determined. Originality. As the criteria for evaluating the effectiveness of the trolleybus operation on the route is proposed to use the ratio between electricity consumption and number of passengers for these characteristics of the route. This is confirmed experimentally. The obtained formulas give the possibility to balance the force work and consequently the volume of energy consumption during the trolleybus movement on the rise and the descent. Practical value. The proposed criterion can be used to adjust the terms of maintenance on the individual program, that means individual maintenance (IM. Type of work performed at the IM should be determined on the basis of diagnostic data of the vehicle (V. The principles of IM were formulated: 1 the primary task is planned and preventative strategy to identify and eliminate troubleshooting and technical actions; 2 operational control of the vehicle (V technical condition on the basis of prediction of its state using the proposed criteria, that takes into account the dependence of power consumption to

Operations Research in PassengerRaiway Transportation

NARCIS (Netherlands)

D. Huisman (Dennis); L.G. Kroon (Leo); R.M. Lentink (Ramon); M.J.C.M. Vromans (Michiel)

2005-01-01

textabstractIn this paper we give an overview of state-of-the-art Operations Research models and techniques used in passenger railway transportation. For each planning phase (strategic, tactical and operational), we describe the planning problems arising there and discuss some models and algorithms

Study to develop improved fire resistant aircraft passenger seat materials

Science.gov (United States)

Duskin, F. E.; Schutter, K. J.; Sieth, H. H.; Trabold, E. L.

1980-01-01

The Phase 3 study of the NASA 'Improved Fire Resistant Aircraft Seat Materials' involved fire tests of improved materials in multilayered combinations representative of cushion configurations. Tests were conducted to determine their thermal, smoke, and fire resistance characteristics. Additionally, a 'Design Guideline' for Fire Resistant Passenger Seats was written outlining general seat design considerations. Finally, a three-abreast 'Tourist Class' passenger seat assembly fabricated from the most advanced fire-resistant materials was delivered.

Effects of vehicle power on passenger vehicle speeds.

Science.gov (United States)

McCartt, Anne T; Hu, Wen

2017-07-04

During the past 2 decades, there have been large increases in mean horsepower and the mean horsepower-to-vehicle weight ratio for all types of new passenger vehicles in the United States. This study examined the relationship between travel speeds and vehicle power, defined as horsepower per 100 pounds of vehicle weight. Speed cameras measured travel speeds and photographed license plates and drivers of passenger vehicles traveling on roadways in Northern Virginia during daytime off-peak hours in spring 2013. The driver licensing agencies in the District of Columbia, Maryland, and Virginia provided vehicle information numbers (VINs) by matching license plate numbers with vehicle registration records and provided the age, gender, and ZIP code of the registered owner(s). VINs were decoded to obtain the curb weight and horsepower of vehicles. The study focused on 26,659 observed vehicles for which information on horsepower was available and the observed age and gender of drivers matched vehicle registration records. Log-linear regression estimated the effects of vehicle power on mean travel speeds, and logistic regression estimated the effects of vehicle power on the likelihood of a vehicle traveling over the speed limit and more than 10 mph over the limit. After controlling for driver characteristics, speed limit, vehicle type, and traffic volume, a 1-unit increase in vehicle power was associated with a 0.7% increase in mean speed, a 2.7% increase in the likelihood of a vehicle exceeding the speed limit by any amount, and an 11.6% increase in the likelihood of a vehicle exceeding the limit by 10 mph. All of these increases were highly significant. Speeding persists as a major factor in crashes in the United States. There are indications that travel speeds have increased in recent years. The current findings suggest the trend toward substantially more powerful vehicles may be contributing to higher speeds. Given the strong association between travel speed and crash

Data Base Development of Automobile and Light Truck Maintenance : Volume I. Test and Appendixes A-D

Science.gov (United States)

1978-08-01

The volume describes the development of the life cycle maintenance costs for 212 sales-leading 1970 through 1975 passenger cars and light trucks. These costs provide a data base for the Department of Transportation, which describes the costs for part...

Intercity Passenger Parametric Analysis: Overview: Maglev Analysis

Science.gov (United States)

1990-04-02

This document provides information intended to clarify consideration of some of the technically-based questions which arise in connection with intercity passenger transportation, and to provide insight into the characteristics and potential roles o...

Demand estimation of bus as a public transport based on gravity model

Directory of Open Access Journals (Sweden)

Asmael Noor

2018-01-01

Full Text Available Bus as a public transport is a suitable service to meet the travel demand between any two zones. Baghdad faced with severe traffic problems along with the development in city size and economy. Passengers have to wait lots of time during commutation to work because of the serious traffic jams. In the last years, rate of car ownership has increased as income levels have gone up and cars have become a preferable mode of transport. Bus, as the only public mode of transport available, is suffering from inconvenience, slowness, and inflexibility. A big emphasis must be given to the public transport system because it introduces an active utilization of limited resources, energy and land. This study determines the demand of public routes for buses using boarding / alighting values to generate a model and assign these demand values to the bus network. Five public routes were selected to collect the required data. Ride check and Point check survey was conducted for each selected route. The results of this study were public demand assigned to the selected bus routes, dwell time, load factor and headway. It is observed that R1 and R3 have the heaviest travel demand; they need special study to improve bus performance and make better transit. The model developed with only limited data available to predict travel demand will assist transportation planners and related agencies in decision making.

46 CFR 72.15-20 - Ventilation for crew quarters and passenger spaces.

Science.gov (United States)

2010-10-01

... shown that a natural system will provide adequate ventilation. However, vessels which trade regularly in... 46 Shipping 3 2010-10-01 2010-10-01 false Ventilation for crew quarters and passenger spaces. 72... VESSELS CONSTRUCTION AND ARRANGEMENT Ventilation § 72.15-20 Ventilation for crew quarters and passenger...

Demand Forecasting in the Smart Grid Paradigm: Features and Challenges

Energy Technology Data Exchange (ETDEWEB)

Khodayar, Mohammad E.; Wu, Hongyu

2015-07-01

Demand forecasting faces challenges that include a large volume of data, increasing number of factors that affect the demand profile, uncertainties in the generation profile of the distributed and renewable generation resources and lack of historical data. A hierarchical demand forecasting framework can incorporate the new technologies, customer behaviors and preferences, and environmental factors.

Experimental Investigation of the Dietary Ecology of the Extinct Passenger Pigeon, Ectopistes migratorius

Directory of Open Access Journals (Sweden)

Ben J. Novak

2018-03-01

Full Text Available For tens of thousands of years, passenger pigeons (Ectopistes migratorius were a dominant member of eastern North American forest communities, with megaflocks comprising up to several billion individuals. The extinction of passenger pigeons in the early twentieth century undoubtedly influenced associated species and ecosystems as interactions stemming from the pigeons disappeared suddenly. Here, we strive to better understand what was probably one of the most significant of these interactions—that between passenger pigeons and seed bearing trees. Using the band-tailed pigeon (Patagioenas fasciata and the rock dove (Columba livia as physical and ecological proxies, we evaluated passenger pigeon dietary range and potential to disperse seeds. Our findings suggest that the passenger pigeon's dietary range, observed historically to be taxonomically broad, was constrained to certain seed sizes due to bill gape size. In addition, we conclude that the digestive process invariably destroyed consumed seeds but the potential for a nutrition/dispersal mutualism might still have existed via regurgitation and post-mortem release of crop contents. Our results highlight the range of ecological interactions that can be lost with species' extinction and the inherent challenge of understanding the consequences of those interactions.

Analysis of WBV on standing and seated passengers during off-peak operation in KL monorail

Science.gov (United States)

Hasnan, K.; Bakhsh, Q.; Ahmed, A.; Ali, D.; Jamali, A. R.

2018-03-01

In this study, the Whole-Body Vibration (WBV) was analyzed on the standing and seated passenger during off-peak operating hours when train was on the track. The experiments were conducted on two car train at one constant location (bogie-1, which is near to driver’s cabin) during downward direction from KL sentral station towards Titiwangsa station. The aim of this study was to analyze that, in which posture of passenger’s exposures the maximum level of WBV. Since, one passenger was performed the whole journey in standing posture whereas, the other passenger was in seated posture. The result obtained from experiments for the RMS accelerations (Arms), maximum acceleration (Amax) and minimum acceleration (Amin) during the trip. As per standard ISO 2631-1, the daily vibration exposure (A8), Vibration Dose value (VDV) and Crest Factor (CF) of this trip for both standing and sitting orientations were calculated. Results shows that the seated passenger was exposed to longer periods of continuous vibration as compared to the standing passenger. Whereas, the Vibration Dose value (VDV) value was greater than the action value as per ISO 2631-1 and within the limit values. The study concluded that whole body vibration transmitted towards both passengers either standing or seated during their journey. But in overall results comparison of both orientations, the seated passengers gained higher vibration than the standing one.

Estimating bus passenger waiting times from incomplete bus arrivals data

OpenAIRE

McLeod, F.N.

2007-01-01

This paper considers the problem of estimating bus passenger waiting times at bus stops using incomplete bus arrivals data. This is of importance to bus operators and regulators as passenger waiting time is a key performance measure. Average waiting times are usually estimated from bus headways, that is, time gaps between buses. It is both time-consuming and expensive to measure bus arrival times manually so methods using automatic vehicle location systems are attractive; however, these syste...

Airline Passenger Profiling Based on Fuzzy Deep Machine Learning.

Science.gov (United States)

Zheng, Yu-Jun; Sheng, Wei-Guo; Sun, Xing-Ming; Chen, Sheng-Yong

2017-12-01

Passenger profiling plays a vital part of commercial aviation security, but classical methods become very inefficient in handling the rapidly increasing amounts of electronic records. This paper proposes a deep learning approach to passenger profiling. The center of our approach is a Pythagorean fuzzy deep Boltzmann machine (PFDBM), whose parameters are expressed by Pythagorean fuzzy numbers such that each neuron can learn how a feature affects the production of the correct output from both the positive and negative sides. We propose a hybrid algorithm combining a gradient-based method and an evolutionary algorithm for training the PFDBM. Based on the novel learning model, we develop a deep neural network (DNN) for classifying normal passengers and potential attackers, and further develop an integrated DNN for identifying group attackers whose individual features are insufficient to reveal the abnormality. Experiments on data sets from Air China show that our approach provides much higher learning ability and classification accuracy than existing profilers. It is expected that the fuzzy deep learning approach can be adapted for a variety of complex pattern analysis tasks.

Influence patterns of transportation parameters in suburban traffic on fatigue of passengers during bus waiting

Directory of Open Access Journals (Sweden)

Тетяна Михайлівна Григорова

2015-05-01

Full Text Available The change of transport fatigue of suburban traffic passengers during waiting transport waiting is investigated. The results of the processing site examinations allow defining the regularities of the influence of parameters of transportation process of passengers to change index activity of regulatory systems in passenger waiting at stopping points of suburban traffic. The discovered patterns were mathematically formalized

[Evaluation of tidal volume delivered by ventilators during volume-controlled ventilation].

Science.gov (United States)

Zhou, Juan; Yan, Yong; Cao, Desen

2014-12-01

To study the ways which ensure the delivery of enough tidal volume to patients under various conditions close to the demand of the physician. The volume control ventilation model was chosen, and the simulation lung type was active servo lung ASL 5000 or Michigan lung 1601. The air resistance, air compliance and lung type in simulation lungs were set. The tidal volume was obtained from flow analyzer PF 300. At the same tidal volume, the displaying values of tidal volume of E5, Servo i, Evital 4, and Evital XL ventilators with different lung types of patient, compliance of gas piping, leakage, gas types, etc. were evaluated. With the same setting tidal volume of a same ventilator, the tidal volume delivered to patients was different with different lung types of patient, compliance of gas piping, leakage, gas types, etc. Reducing compliance and increasing resistance of the patient lungs caused high peak airway pressure, the tidal volume was lost in gas piping, and the tidal volume be delivered to the patient lungs was decreased. If the ventilator did not compensate to leakage, the tidal volume delivered to the patient lungs was decreased. When the setting gas type of ventilator did not coincide with that applying to the patient, the tidal volume be delivered to the patient lungs might be different with the setting tidal volume of ventilator. To ensure the delivery of enough tidal volume to patients close to the demand of the physician, containable factors such as the compliance of gas piping, leakage, and gas types should be controlled.

Heterogeneity of passenger exposure to air pollutants in public transport microenvironments

Science.gov (United States)

Yang, Fenhuan; Kaul, Daya; Wong, Ka Chun; Westerdahl, Dane; Sun, Li; Ho, Kin-fai; Tian, Linwei; Brimblecombe, Peter; Ning, Zhi

2015-05-01

Epidemiologic studies have linked human exposure to pollutants with adverse health effects. Passenger exposure in public transport systems contributes an important fraction of daily burden of air pollutants. While there is extensive literature reporting the concentrations of pollutants in public transport systems in different cities, there are few studies systematically addressing the heterogeneity of passenger exposure in different transit microenvironments, in cabins of different transit vehicles and in areas with different characteristics. The present study investigated PM2.5 (particulate matter with aerodynamic diameters smaller than 2.5 μm), black carbon (BC), ultrafine particles (UFP) and carbon monoxide (CO) pollutant concentrations in various public road transport systems in highly urbanized city of Hong Kong. Using a trolley case housing numerous portable air monitors, we conducted a total of 119 trips during the campaign. Transit microenvironments, classified as 1). busy and secondary roadside bus stops; 2). open and enclosed termini; 3). above- and under-ground Motor Rail Transport (MTR) platforms, were investigated and compared to identify the factors that may affect passenger exposures. The pollutants inside bus and MTR cabins were also investigated together with a comparison of time integrated exposure between the transit modes. Busy roadside and enclosed termini demonstrated the highest average particle concentrations while the lowest was found on the MTR platforms. Traffic-related pollutants BC, UFP and CO showed larger variations than PM2.5 across different microenvironments and areas confirming their heterogeneity in urban environments. In-cabin pollutant concentrations showed distinct patterns with BC and UFP high in diesel bus cabins and CO high in LPG bus cabins, suggesting possible self-pollution issues and/or penetration of on-road pollutants inside cabins during bus transit. The total passenger exposure along selected routes, showed bus

Exposure to particulate matter in traffic: A comparison of cyclists and car passengers

Science.gov (United States)

Int Panis, Luc; de Geus, Bas; Vandenbulcke, Grégory; Willems, Hanny; Degraeuwe, Bart; Bleux, Nico; Mishra, Vinit; Thomas, Isabelle; Meeusen, Romain

2010-06-01

Emerging evidence suggests that short episodes of high exposure to air pollution occur while commuting. These events can result in potentially adverse health effects. We present a quantification of the exposure of car passengers and cyclists to particulate matter (PM). We have simultaneously measured concentrations (PNC, PM2.5 and PM10) and ventilatory parameters (minute ventilation (VE), breathing frequency and tidal volume) in three Belgian locations (Brussels, Louvain-la-Neuve and Mol) for 55 persons (38 male and 17 female). Subjects were first driven by car and then cycled along identical routes in a pairwise design. Concentrations and lung deposition of PNC and PM mass were compared between biking trips and car trips. Mean bicycle/car ratios for PNC and PM are close to 1 and rarely significant. The size and magnitude of the differences in concentrations depend on the location which confirms similar inconsistencies reported in literature. On the other hand, the results from this study demonstrate that bicycle/car differences for inhaled quantities and lung deposited dose are large and consistent across locations. These differences are caused by increased VE in cyclists which significantly increases their exposure to traffic exhaust. The VE while riding a bicycle is 4.3 times higher compared to car passengers. This aspect has been ignored or severely underestimated in previous studies. Integrated health risk evaluations of transport modes or cycling policies should therefore use exposure estimates rather than concentrations.

Computation of order and volume fill rates for a base stock inventory control system with heterogeneous demand to investigate which customer class gets the best service

DEFF Research Database (Denmark)

Larsen, Christian

We consider a base stock inventory control system serving two customer classes whose demands are generated by two independent compound renewal processes. We show how to derive order and volume fill rates of each class. Based on assumptions about first order stochastic dominance we prove when one...

Air quality and passenger comfort in an air-conditioned bus micro-environment.

Science.gov (United States)

Zhu, Xiaoxuan; Lei, Li; Wang, Xingshen; Zhang, Yinghui

2018-04-12

In this study, passenger comfort and the air pollution status of the micro-environmental conditions in an air-conditioned bus were investigated through questionnaires, field measurements, and a numerical simulation. As a subjective analysis, passengers' perceptions of indoor environmental quality and comfort levels were determined from questionnaires. As an objective analysis, a numerical simulation was conducted using a discrete phase model to determine the diffusion and distribution of pollutants, including particulate matter with a diameter air quality and dissatisfactory thermal comfort conditions in Jinan's air-conditioned bus system. To solve these problems, three scenarios (schemes A, B, C) were designed to alter the ventilation parameters. According to the results of an improved simulation of these scenarios, reducing or adding air outputs would shorten the time taken to reach steady-state conditions and weaken the airflow or lower the temperature in the cabin. The airflow pathway was closely related to the layout of the air conditioning. Scheme B lowered the temperature by 0.4 K and reduced the airflow by 0.01 m/s, while scheme C reduced the volume concentration of PM 10 to 150 μg/m 3 . Changing the air supply angle could further improve the airflow and reduce the concentration of PM 10 . With regard to the perception of airflow and thermal comfort, the scheme with an airflow provided by a 60° nozzle was considered better, and the concentration of PM 10 was reduced to 130 μg/m 3 .

METHODICAL APPROACH TO DEFINING INFRASTRUCTURE COMPONENT OF THE COSTS FOR THE PARTICULAR PASSENGER TRAIN TRAFFIC

Directory of Open Access Journals (Sweden)

Yu. S. Barash

2015-06-01

Full Text Available Purpose. In the scientific paper a methodical approach concerning determining the infrastructure component of the costs for traffic of the particular passenger train should be developed. It takes into account the individual characteristics of the particular train traffic. Methodology. To achieve the research purposes was used a method which is based on apportionment of expenses for the traffic of a particular passenger train taking into account the factors affecting the magnitude of costs. This methodology allows allocating properly infrastructure costs for a particular train and, consequently, to determine the accurate profitability of each train. Findings. All expenditures relating to passenger traffic of a long distance were allocated from first cost of passenger and freight traffic. These costs are divided into four components. Three groups of expenses were allocated in infrastructure component, which are calculated according to the certain principle taking into account the individual characteristics of the particular train traffic. Originality. The allocation method of all passenger transportation costs of all Ukrzaliznytsia departments for a particular passenger train was improved. It is based on principles of general indicators formation of each department costs, which correspond to the main influential factors of operating trains. The methodical approach to determining the cost of infrastructure component is improved, which takes into account the effect of the speed and weight of a passenger train on the wear of the railway track superstructure and contact network. All this allows allocating to reasonably the costs of particular passenger train traffic and to determine its profitability. Practical value. Implementing these methods allows calculating the real, economically justified costs of a particular train that will correctly determine the profitability of a particular passenger train and on this basis it allows to make management

Clustering method for counting passengers getting in a bus with single camera

Science.gov (United States)

Yang, Tao; Zhang, Yanning; Shao, Dapei; Li, Ying

2010-03-01

Automatic counting of passengers is very important for both business and security applications. We present a single-camera-based vision system that is able to count passengers in a highly crowded situation at the entrance of a traffic bus. The unique characteristics of the proposed system include, First, a novel feature-point-tracking- and online clustering-based passenger counting framework, which performs much better than those of background-modeling-and foreground-blob-tracking-based methods. Second, a simple and highly accurate clustering algorithm is developed that projects the high-dimensional feature point trajectories into a 2-D feature space by their appearance and disappearance times and counts the number of people through online clustering. Finally, all test video sequences in the experiment are captured from a real traffic bus in Shanghai, China. The results show that the system can process two 320×240 video sequences at a frame rate of 25 fps simultaneously, and can count passengers reliably in various difficult scenarios with complex interaction and occlusion among people. The method achieves high accuracy rates up to 96.5%.

Effect of passenger position on fear of danger experienced during sudden bus stops.

Science.gov (United States)

Aoki, Takeo; Uetake, Teruo; Shimoda, Masahiro

2009-06-01

The purpose of this study was to identify the effect of bus passengers' positions on their fear of danger when a bus stopped suddenly. A temporary bus running course with one bus stop was set up on the campus of the Tokyo University of Agriculture and Technology (TUAT). The bus ran the course 14 times with the bus stopping twice during the course, once at the bus stop and again just after re-starting from the bus stop. The driver was asked to brake more strongly than usual when stopping. Sixteen students (15 males and 1 female) between the ages of 18 and 21 years participated. In turn, all participants were asked to take 14 different postures in the bus. Participants were also asked to report their level of fear on a rating scale each time the bus stopped. The study showed that (1) passengers' fear of danger at the first sudden stop was typically higher than that at the second stop, (2) standing passengers who held hand straps experienced more fear than those who held fixed safety devices, (3) bus passengers sitting on the centre of the rear seat had a great risk of injury if the bus stopped suddenly, and (4) when passengers faced the window and stood transversely with respect to from the moving direction of the bus and the bus stopped suddenly, passengers' fear of danger was affected by the side of the bus on which they stood as well as which hand they used to grasp a safety device.

Voluntary medical male circumcision: matching demand and supply with quality and efficiency in a high-volume campaign in Iringa Region, Tanzania.

Science.gov (United States)

Mahler, Hally R; Kileo, Baldwin; Curran, Kelly; Plotkin, Marya; Adamu, Tigistu; Hellar, Augustino; Koshuma, Sifuni; Nyabenda, Simeon; Machaku, Michael; Lukobo-Durrell, Mainza; Castor, Delivette; Njeuhmeli, Emmanuel; Fimbo, Bennett

2011-11-01

The government of Tanzania has adopted voluntary medical male circumcision (VMMC) as an important component of its national HIV prevention strategy and is scaling up VMMC in eight regions nationwide, with the goal of reaching 2.8 million uncircumcised men by 2015. In a 2010 campaign lasting six weeks, five health facilities in Tanzania's Iringa Region performed 10,352 VMMCs, which exceeded the campaign's target by 72%, with an adverse event (AE) rate of 1%. HIV testing was almost universal during the campaign. Through the adoption of approaches designed to improve clinical efficiency-including the use of the forceps-guided surgical method, the use of multiple beds in an assembly line by surgical teams, and task shifting and task sharing-the campaign matched the supply of VMMC services with demand. Community mobilization and bringing client preparation tasks (such as counseling, testing, and client scheduling) out of the facility and into the community helped to generate demand. This case study suggests that a campaign approach can be used to provide high-volume quality VMMC services without compromising client safety, and provides a model for matching supply and demand for VMMC services in other settings.

A data mining approach to investigate the factors influencing the crash severity of motorcycle pillion passengers.

Science.gov (United States)

Tavakoli Kashani, Ali; Rabieyan, Rahim; Besharati, Mohammad Mehdi

2014-12-01

Motorcycle passengers comprise a considerable proportion of traffic crash victims. During a 5 year period (2006-2010) in Iran, an average of 3.4 pillion passengers are killed daily due to motorcycle crashes. This study investigated the main factors influencing crash severity of this group of road users. The Classification and Regression Trees (CART) method was employed to analyze the injury severity of pillion passengers in Iran over a 4 y ear period (2009-2012). The predictive accuracy of the model built with a total of 16 variables was 74%, which showed a considerable improvement compared to previous studies. The results indicate that area type, land use, and injured part of the body (head, neck, etc.) are the most influential factors affecting the fatality of motorcycle passengers. Results also show that helmet usage could reduce the fatality risk among motorcycle passengers by 28%. The findings of this study might help develop more targeted countermeasures to reduce the death rate of motorcycle pillion passengers. Copyright © 2014 Elsevier Ltd. All rights reserved.

Integrated Optimization of Bus Line Fare and Operational Strategies Using Elastic Demand

Directory of Open Access Journals (Sweden)

Chunyan Tang

2017-01-01

Full Text Available An optimization approach for designing a transit service system is proposed. Its objective would be the maximization of total social welfare, by providing a profitable fare structure and tailoring operational strategies to passenger demand. These operational strategies include full route operation (FRO, limited stop, short turn, and a mix of the latter two strategies. The demand function is formulated to reflect the attributes of these strategies, in-vehicle crowding, and fare effects on demand variation. The fare is either a flat fare or a differential fare structure; the latter is based on trip distance and achieved service levels. This proposed methodology is applied to a case study of Dalian, China. The optimal results indicate that an optimal combination of operational strategies integrated with a differential fare structure results in the highest potential for increasing total social welfare, if the value of parameter ε related to additional service fee is low. When this value increases up to more than a threshold, strategies with a flat fare show greater benefits. If this value increases beyond yet another threshold, the use of skipped stop strategies is not recommended.

Comparing data quality and cost from three modes of on-board transit passenger surveys.

Science.gov (United States)

2015-06-01

This report presents the findings from a research project investigating the relative data quality and administration costs for three : different modes of surveying bus passengers that produce results generalizable to the full passenger population. Th...

76 FR 28947 - Bus Testing: Calculation of Average Passenger Weight and Test Vehicle Weight, and Public Meeting...

Science.gov (United States)

2011-05-19

...-0015] RIN 2132-AB01 Bus Testing: Calculation of Average Passenger Weight and Test Vehicle Weight, and... of proposed rulemaking (NPRM) regarding the calculation of average passenger weights and test vehicle... passenger weights and actual transit vehicle loads. Specifically, FTA proposed to change the average...

49 CFR 1242.45 - Passenger and other revenue equipment (account XX-27-45).

Science.gov (United States)

2010-10-01

... 49 Transportation 9 2010-10-01 2010-10-01 false Passenger and other revenue equipment (account XX-27-45). 1242.45 Section 1242.45 Transportation Other Regulations Relating to Transportation... RAILROADS 1 Operating Expenses-Equipment § 1242.45 Passenger and other revenue equipment (account XX-27-45...

CO2 emissions change from the sales authorization of diesel passenger cars: Korean case study

International Nuclear Information System (INIS)

Jeong, Suk Jae; Kim, Kyung Sup; Park, Jin-Won

2009-01-01

The climatic change is a matter of grave concern to the whole world. As a countermeasure against the climatic change convention, the Korean government has authorized the sale of diesel passenger cars since 2005. In this paper, we analyze the effects of the sales authorization of diesel passenger cars in its role as a countermeasure. Their share, carbon emissions, and pollutant emissions of each type of passenger car are analyzed using system dynamics. The result is that the carbon emissions are decreased by 5.4% but the pollutant emissions are increased by 5%. If the pollutant emissions are controlled, the sales authorization of diesel passenger cars would be a good countermeasure against the climatic change convention.

Small passenger car transmission test-Chevrolet 200 transmission

Science.gov (United States)

Bujold, M. P.

1980-01-01

The small passenger car transmission was tested to supply electric vehicle manufacturers with technical information regarding the performance of commerically available transmissions which would enable them to design a more energy efficient vehicle. With this information the manufacturers could estimate vehicle driving range as well as speed and torque requirements for specific road load performance characteristics. A 1979 Chevrolet Model 200 automatic transmission was tested per a passenger car automatic transmission test code (SAE J651b) which required drive performance, coast performance, and no load test conditions. The transmission attained maximum efficiencies in the mid-eighty percent range for both drive performance tests and coast performance tests. Torque, speed and efficiency curves map the complete performance characteristics for Chevrolet Model 200 transmission.

Commercial suborbital space tourism-proposal on passenger's medical selection

Science.gov (United States)

Kluge, Götz; Stern, Claudia; Trammer, Martin; Chaudhuri, Indra; Tuschy, Peter; Gerzer, Rupert

2013-12-01

Commercial human spaceflight has excellent economic and technical perspectives in the next decades. Passengers will be persons from a general population differing from culture, age, gender and health status. They all will have to withstand physical loads of spaceflight such as acceleration and deceleration forces, microgravity, vibration, noise and radiation. There is a necessity to mitigate all negative impacts on the passengers' health. Besides precautionary measures in construction and equipment, a diligent medical selection and pre-flight training is recommended. To ensure an easy and at the same time qualified selection procedure, it is necessary to define medical selection criteria and training methods. As experiences with suborbital spaceflight of private passengers are still few we recommend to implement in the beginning of this new era maximum safety standards. Having performed a satisfactory number of successful flights, some of the selection criteria and training sessions might be loosened or modified. This judicious approach is in the interest of the spaceflight participants as well as of the providing companies. As a guideline we propose a four step approach that allows a quick decision concerning the fitness of participants to fly as well as an intensive preparation of the passengers. For the first two steps positive experiences from medical screening and examination of professional pilots can be utilised. According to JAR-FCL 3 (Joint Aviation Requirements-Flight Crew Licensing, Chapter 3) a questionnaire with medical interview targeting the medical background of the respective person and including no-go criteria provides a first estimation for applicants and medical examiners whether there will be a chance to be accepted as a passenger. The second step of selection comprises the physical examination of the applicant adjusted to the professional pilot's examination procedure. As the physical challenges of the suborbital flight will exceed the impact

Are the Costs of Reducing Greenhouse Gases from Passenger Vehicles Negative?

OpenAIRE

Parry, Ian W.H.

2006-01-01

Energy models suggest that the cost of reducing carbon emissions from the transportation sector is high relative to other sectors, such as electricity generation. However, this paper shows that taxes to reduce passenger vehicle emissions produce large net benefits, rather than costs, when account is taken of (a) their impact on reducing non-carbon externalities from passenger vehicle use, and (b) interactions with the broader fiscal system. Both of these considerations also strengthen the cas...

Cosmic radiation during air travel: trends in exposure of aircrews and airline passengers

NARCIS (Netherlands)

Blaauboer RO; LSO

2004-01-01

An unfavourable effect of flying is the enhanced exposure of both passengers and aircrew to cosmic radiation at high altitudes. On the basis of a detailed survey on passengers arriving at or departing from Amsterdam Schiphol Airport in the 1988-1997 period, estimates of individual effective dose for

49 CFR 176.166 - Transport of Class 1 (explosive) materials on passenger vessels.

Science.gov (United States)

2010-10-01

... 49 Transportation 2 2010-10-01 2010-10-01 false Transport of Class 1 (explosive) materials on....166 Transport of Class 1 (explosive) materials on passenger vessels. (a) Only the following Class 1 (explosive) materials may be transported as cargo on passenger vessels: (1) Division 1.4 (explosive...

Serviceability of passenger trains during acquisition projects

NARCIS (Netherlands)

Parada Puig, J.E.

2015-01-01

Acquiring assets that can be serviced cost effectively is a fundamental goal during large acquisition projects at NS, the largest railway company in the Netherlands. Buying passenger trains and providing their required services requires important strategic decisions involving both the trains and

Passenger thermal perceptions, thermal comfort requirements, and adaptations in short- and long-haul vehicles.

Science.gov (United States)

Lin, Tzu-Ping; Hwang, Ruey-Lung; Huang, Kuo-Tsang; Sun, Chen-Yi; Huang, Ying-Che

2010-05-01

While thermal comfort in mass transportation vehicles is relevant to service quality and energy consumption, benchmarks for such comfort that reflect the thermal adaptations of passengers are currently lacking. This study reports a field experiment involving simultaneous physical measurements and a questionnaire survey, collecting data from 2,129 respondents, that evaluated thermal comfort in short- and long-haul buses and trains. Experimental results indicate that high air temperature, strong solar radiation, and low air movement explain why passengers feel thermally uncomfortable. The overall insulation of clothing worn by passengers and thermal adaptive behaviour in vehicles differ from those in their living and working spaces. Passengers in short-haul vehicles habitually adjust the air outlets to increase thermal comfort, while passengers in long-haul vehicles prefer to draw the drapes to reduce discomfort from extended exposure to solar radiation. The neutral temperatures for short- and long-haul vehicles are 26.2 degrees C and 27.4 degrees C, while the comfort zones are 22.4-28.9 degrees C and 22.4-30.1 degrees C, respectively. The results of this study provide a valuable reference for practitioners involved in determining the adequate control and management of in-vehicle thermal environments, as well as facilitating design of buses and trains, ultimately contributing to efforts to achieve a balance between the thermal comfort satisfaction of passengers and energy conserving measures for air-conditioning in mass transportation vehicles.

14 CFR 135.122 - Stowage of food, beverage, and passenger service equipment during aircraft movement on the...

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false Stowage of food, beverage, and passenger....122 Stowage of food, beverage, and passenger service equipment during aircraft movement on the surface... when any food, beverage, or tableware furnished by the certificate holder is located at any passenger...

Multiple imputation of missing passenger boarding data in the national census of ferry operators

Science.gov (United States)

2008-08-01

This report presents findings from the 2006 National Census of Ferry Operators (NCFO) augmented with imputed values for passengers and passenger miles. Due to the imputation procedures used to calculate missing data, totals in Table 1 may not corresp...

A contribution towards establishing more comfortable space weather to cope with increased human space passengers for ISS shuttles

Science.gov (United States)

Kalu, A.

Space Weather is a specialized scienctific descipline in Meteorology which has recently emerged from man's continued research efforts to create a familiar spacecraft environment which is physiologically stable and life sustaining for astronauts and human passengers in distant space travels. As the population of human passengers in space shuttles rapidly increases, corresponding research on sustained micro-climate of spacecrafts is considered necessary and timely. This is because existing information is not meant for a large population in spacecrafts. The paper therefore discusses the role of meteorology (specifically micrometeorology) in relation to internal communication, spacecraft instrumentation and physiologic comfort of astronauts and space passengers (the later may not necessarily be trained astronauts, but merely business men or tourist space travellers for business transactions in the International Space Station (ISS)). It is recognized that me eorology which is a fundamental science amongt multidiscplinary sciences has been found to be vital in space travels and communication. Space weather therefore appears in slightly different format where temperature and humidity changes and variability within the spacecraft exert very significant influences on the efficiency of astronauts and the effectiveness of the various delicate instrument gadgets aimed at reducing the frequency of computer failures and malfunction of other instruments on which safety of the spacecraft depends. Apart from the engineering and technological problems which space scientists must have to overcome when human population in space shuttles increases as we now expect, based on evidence from successful missions to ISS, the maint enace of physiologic comfort state of astronauts, which, as far as scientifically possible, should be as near as possible to their Earth-Atmosphere condition. This is one of the most important and also most difficult conditions to attain. It demands a mor e

Biodiesel intercity passenger rail revenue service test.

Science.gov (United States)

2013-10-01

Amtrak, with the support of the Federal Railroad Administration, operated a P-32 passenger locomotive in revenue service for a : period of 12 months, on a blend of 20 percent pure biodiesel and 80 percent #2 ultra-low sulfur diesel (ULSD) fuel. The G...

Analyzing Factors Of In-flight Services Of Garuda Indonesia And Batik Air Towards Passengers Satisfaction

OpenAIRE

Tumewu, Ferdinand; Tulandi, Victor Michael

2014-01-01

Transportation services play an important role in supporting any activity, of human. Various types of the transportation that we use. Among them, are air transportation or airplane. Talk about the satisfaction of airline passenger, nowadays many airlines competing to provide the best service for the passengers, one of the things that can influence passenger satisfaction is through airline service especially in-flight service. The objective of this research is to identify the factors of in-fli...

In-flight Meals, Passengers- Level of Satisfaction and Re-flying Intention

OpenAIRE

Mohd Zahari; M. S; Salleh; N. K.; Kamaruddin; M. S. Y; Kutut; M. Z.

2011-01-01

Service quality has become a centerpiece for airline companies in vying with one another and keeps their image in the minds of passengers. Many airlines have pushed service quality through service personalization which includes both ground and on board especially from the viewpoint of retaining satisfied passengers and attracting new ones. Besides those, in-flight meals/food service is another important aspect of the airline operation. The in flight meals/food services now are seen as part of...

Outlook of Japan's economy and energy demand for FY2017

International Nuclear Information System (INIS)

Aoshima, Momoko; Yorita, Y.; Tsunoda, M.

2017-01-01

This paper disclosed the prospects of Japan's economy and energy demand as the standard scenario, with the following major preconditions in mind: (1) world economy grows moderately, (2) supply and demand of crude oil are gently balanced, (3) exchange rate is Yen110/$, (4) nuclear power generation gradually moves back to operation, and the number of cumulative reopening units until the end of FY2017 reaches 14, and (5) supply and demand of electric power can secure 3% supply reserve ratio necessary for stable supply of electricity nationwide. In addition, this paper carried out evaluation analyses on the following various influences: macro economy, production activity, primary energy domestic supply, final energy consumption, electricity sales volume and power source composition (electric power companies), city gas sales volume (gas companies), fuel oil and LPG sales volume and crude oil throughput, renewable energy power generation, impact of nuclear power plant restart base, income/expenditure for on renewable energy generation, and impact of realization of large scale coal thermal power plant plan. (A.O.)

Child passenger injury risk in sibling versus non-sibling teen driver crashes: a US study.

Science.gov (United States)

Senserrick, Teresa M; Kallan, Michael J; Winston, Flaura K

2007-06-01

Several international jurisdictions allow family exemptions to graduated driver licensing passenger restrictions. The objective of this research was to examine differences in injury risk to US child passengers in crashes involving sibling versus non-sibling teen drivers, and to compare outcomes with crashes involving adult drivers. Insurance claim and telephone survey data were collected on 16 233 child passengers (representing 289 329 children) in 17 US jurisdictions. There was a trend toward higher restraint non-use by child passengers in the non-sibling group than in the sibling group (9.6% vs 4.7%; p = 0.08). Children in the sibling group had a 40% lower risk of injury than those in the non-sibling group (adjusted OR 0.60, 95% CI 0.40 to 0.90); however, injury risk was higher in the sibling group than in children traveling with adults (adjusted OR 1.57, 95% CI 1.09 to 2.26). Child passengers riding with sibling teen drivers may be safer than those riding with non-sibling teens, but not as safe as those riding with adult drivers.

Energy scenarios for European passenger transport in the year 2030

Energy Technology Data Exchange (ETDEWEB)

Rienstra, S.A.; Nijkamp, P. [Systems and Control Group, Faculty of Mechanical and Marine Engineering, Delft University of Technology, Delft (Netherlands)] Smokers, R.T.M. [ECN Policy Studies, Petten (Netherlands)

1995-11-01

In this paper four energy scenarios for West-European passenger transport are developed. To start with, the present transport system as a baseline case is described and analysed. Next, for each scenario it is outlined how the passenger transport system may look like in terms of the use of various existing and future transport technologies and the corresponding modal split. Based on this information, expected energy consumption features of the various transport modes are described, data on the present fuel supply and electricity generation system are provided, and estimations of the future energy system are given. Then, the energy consumption and CO2 emissions associated with the future passenger transport systems are calculated and these impacts are compared with the current system. The conclusion is that a large-scale reduction of CO2 emissions is possible in several ways, but that each option will cause many problems because drastic policy measures will have to be introduced, which may affect economic growth and the lifestyles of individuals. 4 figs., 11 tabs., 22 refs.

Weight and volume estimates for aluminum-air batteries designed for electric vehicle applications

Science.gov (United States)

Cooper, J. F.

1980-01-01

The weights and volumes of reactants, electrolyte, and hardware components are estimated for an aluminum-air battery designed for a 40-kW (peak), 70-kWh aluminum-air battery. Generalized equations are derived which express battery power and energy content as functions of total anode area, aluminum-anode weight, and discharge current density. Equations are also presented which express total battery weight and volume as linear combinations of the variables, anode area and anode weight. The sizing and placement of battery components within the engine compartment of typical five-passenger vehicles is briefly discussed.

MATHEMATICAL MODEL OF UNSTEADY HEAT TRANSFER OF PASSENGER CAR WITH HEATING SYSTEM

Directory of Open Access Journals (Sweden)

E. V. Biloshytskyi

2018-02-01

Full Text Available Purpose. The existing mathematical models of unsteady heat processes in a passenger car do not fully reflect the thermal processes, occurring in the car wits a heating system. In addition, unsteady heat processes are often studied in steady regime, when the heat fluxes and the parameters of the thermal circuit are constant and do not depend on time. In connection with the emergence of more effective technical solutions to the life support system there is a need for creating a new mathematical apparatus, which would allow taking into account these features and their influence on the course of unsteady heat processes throughout the travel time. The purpose of this work is to create a mathematical model of the heat regime of a passenger car with a heating system that takes into account the unsteady heat processes. Methodology. To achieve this task the author composed a system of differential equations, describing unsteady heat processes during the heating of a passenger car. For the solution of the composed system of equations, the author used the method of elementary balances. Findings. The paper presents the developed numerical algorithm and computer program for simulation of transitional heat processes in a locomotive traction passenger car, which allows taking into account the various constructive solutions of the life support system of passenger cars and to simulate unsteady heat processes at any stage of the trip. Originality. For the first time the author developed a mathematical model of heat processes in a car with a heating system, that unlike existing models, allows to investigate the unsteady heat engineering performance in the cabin of the car under different operating conditions and compare the work of various life support systems from the point of view their constructive solutions. Practical value. The work presented the developed mathematical model of the unsteady heat regime of the passenger car with a heating system to estimate

Building Airline Passenger Loyalty Through an Understanding of Customer Value: A Relationship Segmentation of Airline Passengers

OpenAIRE

Leick, Ryan

2007-01-01

This thesis explores means of restoring profitability to the airline industry by cultivating intrinsically motivated brand loyalty between passengers and airlines in today’s fragile environment. The air transport industry is caught up in traditional transaction-based strategies. Airlines rely on archaic frequent flyer programs (FFPs) to maintain loyalty which deter customers from choosing alternative airlines by increasing the cost associated with switching. In contrast, oth...

A new simulation model for assessing aircraft emergency evacuation considering passenger physical characteristics

International Nuclear Information System (INIS)

Liu, Yu; Wang, Weijie; Huang, Hong-Zhong; Li, Yanfeng; Yang, Yuanjian

2014-01-01

Conducting a real aircraft evacuation trial is oftentimes unaffordable as it is extremely expensive and may cause severe injury to participants. Simulation models as an alternative have been used to overcome the aforementioned issues in recent years. This paper proposes a new simulation model for emergency evacuation of civil aircraft. Its unique features and advantages over the existing models are twofold: (1) passengers' critical physical characteristics, e.g. waist size, gender, age, and disabilities, which impact the movement and egress time of individual evacuee from a statistical viewpoint, are taken into account in the new model. (2) Improvements are made to enhance the accuracy of the simulation model from three aspects. First, the staggered mesh discretization method together with the agent-based approach is utilized to simulate movements of individual passengers in an emergency evacuation process. Second, each node discretized to represent cabin space in the new model can contain more than one passenger if they are moving in the same direction. Finally, each individual passenger is able to change his/her evacuation route in a real-time manner based upon the distance from the current position to the target exit and the queue length. The effectiveness of the proposed simulation model is demonstrated on Boeing 767-300 aircraft. - Highlights: • A new simulation model of aircraft emergency evacuation is developed. • Some critical physical characteristics of passengers', e.g. waist size, gender, age, and disabilities, are taken into account in the new model. • An agent-based approach along with a multi-level fine network representation is used. • Passengers are able to change their evacuation routes in a real-time manner based upon distance and length of queue

Headway Deviation Effects on Bus Passenger Loads : Analysis of Tri-Met's Archived AVL-APC Data

Science.gov (United States)

2003-01-01

In this paper we empirically analyze the relationship between transit service headway deviations and passenger loads, using archived data from Tri-Met's automatic vehicle location and automatic passenger counter systems. The analysis employs twostage...

Specific climate impact of passenger and freight transport

Science.gov (United States)

2010-01-01

Emissions of short-lived species contribute significantly to : the climate impact of transportation. The magnitude of the effects : varies over time for each transport mode. This paper compares : first the absolute climate impacts of current passenge...

Crippling test of a Budd Pioneer passenger car

Science.gov (United States)

2012-04-16

This research program was sponsored by the Federal Railroad Administration (FRA) Office of Research and Development in support of the advancement of improved safety standards for passenger rail vehicles. FRA and the Volpe National Transportation Syst...

Sustainable passenger road transport scenarios to reduce fuel consumption, air pollutants and GHG (greenhouse gas) emissions in the Mexico City Metropolitan Area

International Nuclear Information System (INIS)

Chavez-Baeza, Carlos; Sheinbaum-Pardo, Claudia

2014-01-01

This paper presents passenger road transport scenarios that may assist the MCMA (Mexico City Metropolitan Area) in achieving lower emissions in both criteria air pollutants (CO, NO x , NMVOC (non-methane volatile organic compounds), and PM 10 ) and GHG (greenhouse gas) (CH 4 , N 2 O and CO 2 ), while also promoting better mobility and quality of life in this region. We developed a bottom-up model to estimate the historical trends of energy demand, criteria air pollutants and GHG emissions caused by passenger vehicles circulating in the Mexico City Metropolitan Area (MCMA) in order to construct a baseline scenario and two mitigation scenarios that project their impact to 2028. Mitigation scenario “eff” considers increasing fuel efficiencies and introducing new technologies for vehicle emission controls. Mitigation scenario “BRT” considers a modal shift from private car trips to a Bus Rapid Transport system. Our results show significant reductions in air pollutants and GHG emissions. Incentives and environmental regulations are needed to enable these scenarios. - Highlights: • More than 4.2 million passenger vehicles in the MCMA (Mexico City Metropolitan Area) that represent 61% of criteria pollutants and 44% of GHG (greenhouse gas) emissions. • Emissions of CO, NO x and NMVOC (non-methane volatile organic compounds) in baseline scenario decrease with respect to its 2008 value because emission standards. • Emissions of PM 10 and GHG increase in baseline scenario. • Emissions of PM 10 and GHG decrease in eff + BRT scenario from year 2020. • Additional reductions are possible with better standards for diesel vehicles and other technologies

Noise in the passenger cars of high-speed trains.

Science.gov (United States)

Hong, Joo Young; Cha, Yongwon; Jeon, Jin Yong

2015-12-01

The aim of this study is to investigate the effects of both room acoustic conditions and spectral characteristics of noises on acoustic discomfort in a high-speed train's passenger car. Measurement of interior noises in a high-speed train was performed when the train was operating at speeds of 100 km/h and 300 km/h. Acoustic discomfort caused by interior noises was evaluated by paired comparison methods based on the variation of reverberation time (RT) in a passenger car and the spectral differences in interior noises. The effect of RT on acoustic discomfort was not significant, whereas acoustic discomfort significantly varied depending on spectral differences in noise. Acoustic discomfort increased with increment of the sound pressure level (SPL) ratio at high frequencies, and variation in high-frequency noise components were described using sharpness. Just noticeable differences of SPL with low- and high-frequency components were determined to be 3.7 and 2.9 dB, respectively. This indicates that subjects were more sensitive to differences in SPLs at the high-frequency range than differences at the low-frequency range. These results support that, for interior noises, reduction in SPLs at high frequencies would significantly contribute to improved acoustic quality in passenger cars of high-speed trains.

Intercity passenger rail : financial performance of Amtrak's routes

Science.gov (United States)

1998-05-14

Since it began operations in 1971, the National Railroad Passenger Corporation : (Amtrak) has never been profitable and has received about $21 billion in federal : subsidies for operating and capital expenses. In December 1994, at the : direction of ...

14 CFR 250.5 - Amount of denied boarding compensation for passengers denied boarding involuntarily.

Science.gov (United States)

2010-01-01

... 14 Aeronautics and Space 4 2010-01-01 2010-01-01 false Amount of denied boarding compensation for passengers denied boarding involuntarily. 250.5 Section 250.5 Aeronautics and Space OFFICE OF THE SECRETARY... boarding compensation for passengers denied boarding involuntarily. (a) Subject to the exceptions provided...

Marketing Research on Passenger Satisfaction With Public Transport Service in the City of Belgrade

Directory of Open Access Journals (Sweden)

Branislav Radnović

2015-03-01

Full Text Available The aim of this paper is to determine, based on conducted marketing research, the level of passenger satisfaction with public transport services for the purpose of making better marketing decisions in the example of the City of Belgrade. The main task is to test the hypothesis on the existence of significant influence of factors, such as quality service, attitude and behaviour of employees (e.g. driver, adequate informing, quality of vehicles, line routes and timetable, on passenger satisfaction. Correlation coefficient and regression analysis were used for interpreting the obtained results and examining the formulated hypothesis. Empirical research has shown that there is a significant correlation between the aforementioned factors and passenger satisfaction with public transport services. The obtained results provided recommendations and guidelines for improving and increasing the quality of public transport services. The research results also provide the basis for future research that could examine the relationship between passenger satisfaction with services and sub-groups within the analyzed factors.

46 CFR 25.25-17 - Survival craft requirements for uninspected passenger vessels of at least 100 gross tons.

Science.gov (United States)

2010-10-01

... 46 Shipping 1 2010-10-01 2010-10-01 false Survival craft requirements for uninspected passenger... Survival craft requirements for uninspected passenger vessels of at least 100 gross tons. (a) Each uninspected passenger vessel of at least 100 gross tons must have adequate survival craft with enough capacity...

Passenger Perception towards E-ticketing Services, Airline Industry

Directory of Open Access Journals (Sweden)

Dr.Sc. Nail Reshidi

2014-02-01

Full Text Available This paper aims to identify the critical dominant incidents and key instigators that influence on usage or lack of usage of e-ticketing by Kosovo Air Passengers. The research at hand utilizes the Grounded Theory of Barney Glaser and Anselm Strauss, and the Critical Incident Technique in order to identify the factors that influence on the (diss satisfaction of the travellers in using e-ticketing. For the purpose of this paper, the empirical data were gathered through interviews by using open ended questions. Among 93 interviews with the random selected passengers, 13 interviews were deemed as invalid. The empirical results highlighted the need for raising the consciousness regarding the efficacy and the advantages of eticketing. On the other hand, many other passengers cannot conceive the possibility of travelling without use of e-ticketing, given that in the past they spent much time in finding the right agent, desired destination, purchase difficulties in making reservation, confirmation, changes, or they had to carry large amounts of cash money to buy tickets which raised insecurity concerns. Research is limited only to the description of critical incidents that occurred in Prishtina International Airport. Majority of the respondents were highly-educated with high income status. These characteristics create a bias and constrain our ability to extrapolate from the findings. Nevertheless, the study serves as a point for more in-depth analysis and discussion on e-ticketing behaviour in Airline industry.

Recombinant Passenger Proteins Can Be Conveniently Purified by One-Step Affinity Chromatography.

Science.gov (United States)

Wang, Hua-zhen; Chu, Zhi-zhan; Chen, Chang-chao; Cao, Ao-cheng; Tong, Xin; Ouyang, Can-bin; Yuan, Qi-hang; Wang, Mi-nan; Wu, Zhong-kun; Wang, Hai-hong; Wang, Sheng-bin

2015-01-01

Fusion tag is one of the best available tools to date for enhancement of the solubility or improvement of the expression level of recombinant proteins in Escherichia coli. Typically, two consecutive affinity purification steps are often necessitated for the purification of passenger proteins. As a fusion tag, acyl carrier protein (ACP) could greatly increase the soluble expression level of Glucokinase (GlcK), α-Amylase (Amy) and GFP. When fusion protein ACP-G2-GlcK-Histag and ACP-G2-Amy-Histag, in which a protease TEV recognition site was inserted between the fusion tag and passenger protein, were coexpressed with protease TEV respectively in E. coli, the efficient intracellular processing of fusion proteins was achieved. The resulting passenger protein GlcK-Histag and Amy-Histag accumulated predominantly in a soluble form, and could be conveniently purified by one-step Ni-chelating chromatography. However, the fusion protein ACP-GFP-Histag was processed incompletely by the protease TEV coexpressed in vivo, and a large portion of the resulting target protein GFP-Histag aggregated in insoluble form, indicating that the intracellular processing may affect the solubility of cleaved passenger protein. In this context, the soluble fusion protein ACP-GFP-Histag, contained in the supernatant of E. coli cell lysate, was directly subjected to cleavage in vitro by mixing it with the clarified cell lysate of E. coli overexpressing protease TEV. Consequently, the resulting target protein GFP-Histag could accumulate predominantly in a soluble form, and be purified conveniently by one-step Ni-chelating chromatography. The approaches presented here greatly simplify the purification process of passenger proteins, and eliminate the use of large amounts of pure site-specific proteases.

High-speed and intercity passenger rail testing strategy.

Science.gov (United States)

2013-05-01

This high-speed and intercity passenger rail (HSIPR) testing strategy addresses the requirements for testing of high-speed train sets and technology before introduction to the North American railroad system. The report documents the results of a surv...

Structure and impacts of fuel economy standards for passenger cars in China

International Nuclear Information System (INIS)

Wagner, David Vance; An Feng; Wang Cheng

2009-01-01

By the end of 2006, there were about 24 million total passenger cars on the roads in China, nearly three times as many as in 2001. To slow the increase in energy consumption by these cars, China began implementing passenger car fuel economy standards in two phases beginning in 2005. Phase 1 fuel consumption limits resulted in a sales-weighted new passenger car average fuel consumption decrease of about 11%, from just over 9 l/100 km to approximately 8 l/100 km, from 2002 to 2006. However, we project that upon completion of Phase 2 limits in 2009, the average fuel consumption of new passenger cars in China may drop only by an additional 1%, to approximately 7.9 l/100 km. This is due to the fact that a majority of cars sold in 2006 already meets the stricter second phase fuel consumption limits. Simultaneously, other trends in the Chinese vehicle market, including increases in average curb weight and increases in standards-exempt imported vehicles, threaten to offset the efficiency gains achieved from 2002 to 2006. It is clear that additional efforts and policies beyond Phase 2 fuel consumption limits are required to slow and, ultimately, reverse the trend of rapidly rising energy consumption and greenhouse gases from China's transportation sector.

General principles of control method of passenger car bodies bending vibration parameters

Science.gov (United States)

Skachkov, A. N.; Samoshkin, S. L.; Korshunov, S. D.; Kobishchanov, V. V.; Antipin, D. Ya

2018-03-01

Weight reduction of passenger cars is a promising direction of reducing the cost of their production and increasing transportation profitability. One way to reduce the weight of passenger cars is the lightweight metal body design by means of using of high-strength aluminum alloys, low-alloy and stainless steels. However, it has been found that the limit of the lightweight metal body design is not determined by the total mode of deformation, but its flexural rigidity, as the latter influences natural frequencies of body bending vibrations. With the introduction of mandatory certification for compliance with the Customs Union technical regulations, the following index was confirmed: “first natural frequency of body bending vibrations in the vertical plane”. This is due to the fact that vibration, noise and car motion depend on this index. To define the required indexes, the principles of the control method of bending vibration parameters of passenger car bodies are proposed in this paper. This method covers all stages of car design – development of design documentation, manufacturing and testing experimental and pilot models, launching the production. The authors also developed evaluation criteria and the procedure of using the results for introduction of control method of bending vibration parameters of passenger car bodies.

Carbon emission allowance allocation with a mixed mechanism in air passenger transport.

Science.gov (United States)

Qiu, Rui; Xu, Jiuping; Zeng, Ziqiang

2017-09-15

Air passenger transport carbon emissions have become a great challenge for both governments and airlines because of rapid developments in the aviation industry in recent decades. In this paper, a mixed mechanism composed of a cap-and-trade mechanism and a carbon tax mechanism is developed to assist governments in allocating carbon emission allowances to airlines operating on the routes. Combined this mixed mechanism with an equilibrium strategy, a bi-level multi-objective model is proposed for an air passenger transport carbon emission allowance allocation problem, in which a government is considered as a leader and the airlines as the followers. An interactive solution approach integrating a genetic algorithm and an interactive evolutionary mechanism is designed to search for satisfactory solutions of the proposed model. A case study is then presented to show its practicality and efficiency in mitigating carbon emissions. Sensitivity analyses under different tradable and taxable levels are also conducted, which can give the government insights as to the tradeoffs between lowering carbon intensity and improving airlines' operations. The computational results demonstrate that the mixed mechanism can assist greatly in carbon emission mitigation for air passenger transport and therefore, it should be established as part of air passenger transport carbon emission policies. Copyright © 2017 Elsevier Ltd. All rights reserved.

The Application of Online Check-in in the Process of Passenger Handling in Air Transportation

Directory of Open Access Journals (Sweden)

František Adamčík

2017-11-01

Full Text Available Passenger handling is one of the most important activities any passenger is obliged to carry out prior to boarding the plane to depart. For the handling process to be safeguarded, it is inevitable to perform the services involved in it fast and efficiently so as to prevent idle times or delays during the procedures potentially resulting in delay of flight. By gradual development of the so-called web-based information technologies, some of the activities involved in the handling process can be delegated to the passengers themselves, thereby achieving a faster course of the passenger handling process. In this contribution the authors are dealing with the status quo of the on-line web-based check-in process in air transportation forecasting the expected course of events in these services in the future. Next, based on analyzing functions and characteristics of similar solutions available in the market, the authors are putting forward their new proposal of their own design of a self-service, on-line system of passenger handling with the aim to simplify and expedite the entire handling process. It is the aim of the authors to develop a competitive design in terms of costs as well as new function and services not offered by the hitherto existing with emphasis on improving efficiency of passenger handling at the airports. The resulting solution thanks to internet based technologies is platform independent and fully applicable to the process of airport passenger handling. To an equal extent, the solutions are being applied by the authors to the educational process, as a training tool for the preparation of the aviation personnel and also as part of simulation models for research in the field of airport processes optimization.

The Passenger Satisfaction Survey in the Regional Integrated Public Transport System

Directory of Open Access Journals (Sweden)

Martina Valaskova

2008-11-01

Full Text Available This article describes the Quality criteria Method of the Servicesin the Integrated Public Transport System in Slovak Republic.The proposed method is based on the detailed list of theQuality criteria of the Services in Public Transport from theview of passengers. The criteria are determined based on theSlovak Technical Norm STN EN 138 16 which is related toquality of transport. The method has been applied in RegionalIntegrated Public Transport System of Zilina (ZRIDS in theform of Passenger Quality Satisfaction Survey.

Cost/benefit tradeoffs for reducing the energy consumption of the commercial air transportation system. Volume 2: Market and economic analyses

Science.gov (United States)

Vanabkoude, J. C.

1976-01-01

The impact of the most promising fuel conserving options on fuel consumption, passenger demand, operating costs, and airline profits when implemented into the U.S. domestic and international airline fleets is assessed. The potential fuel savings achievable in the U.S. scheduled air transportation system over the forecast period, 1973-1990, are estimated.

The Simultaneous Vehicle Scheduling and Passenger Service Problem with Flexible Dwell Times

DEFF Research Database (Denmark)

Fonseca, Joao Filipe Paiva; Larsen, Allan; van der Hurk, Evelien

In this talk, we deal with a generalization of the well-known Vehicle Scheduling Problem(VSP) that we call Simultaneous Vehicle Scheduling and Passenger Service Problem with Flexible Dwell Times (SVSPSP-FDT). The SVSPSP-FDT generalizes the VSP because the original timetables of the trips can...... be changed (i.e., shifted and stretched) in order to minimize a new objective function that aims at minimizing the operational costs plus the waiting times of the passengers at transfer points. Contrary to most generalizations of the VSP, the SVSPSP-FDT establishes the possibility of changing trips' dwell...... times at important transfer points based on expected passenger ows. We introduce a compact mixed integer linear formulation of the SVSPSP-FDT able to address small instances. We also present a meta-heuristic approach to solve medium/large instances of the problem. The e ectiveness of the proposed...

Probabilistic Analysis of Collision Damages with Application to ro-Ro Passenger Vessels

DEFF Research Database (Denmark)

Pedersen, Preben Terndrup; Hansen, Peter Friis; Nielsen, Lars Peter

1997-01-01

To quantify the risks involved in Ro-ro passenger vessel traffic, rational criteria for prediction and evaluation of collision accidents have to be developed. This implies that probabilities as well as the inherent consequences have to be analyzed and assessed.The present report outlines a method...... for evaluation of the probability of a Ro-Ro passenger vessel on a given route being struck by another ship. Given a collision has taken place the spatial distribution of the collision damages is calculated. Results are presented in terms of probability distributions, for indentation depth, length and height...... of the holes and for the vertical location. The main benefit of the formulated procedure is that it allows comparisons of various navigation routes by assessing the relative frequencies of collisions. The derived procedure is applied to two typical Ro-Ro passenger vessel routes....

49 CFR 39.93 - What wheelchairs and other assistive devices may passengers with a disability bring onto a...

Science.gov (United States)

2010-10-01

... 49 Transportation 1 2010-10-01 2010-10-01 false What wheelchairs and other assistive devices may passengers with a disability bring onto a passenger vessel? 39.93 Section 39.93 Transportation Office of the... and Services to Passengers With Disabilities § 39.93 What wheelchairs and other assistive devices may...

49 CFR 39.43 - May PVOs impose special charges on passengers with a disability for providing services required...

Science.gov (United States)

2010-10-01

... to passengers with a disability are available only in a type or class of service or part of a vessel that are more expensive than the type or class of service or part of a vessel that the passenger... of the Secretary of Transportation TRANSPORTATION FOR INDIVIDUALS WITH DISABILITIES: PASSENGER...

Passengers waste production during flights.

Science.gov (United States)

Tofalli, Niki; Loizia, Pantelitsa; Zorpas, Antonis A

2017-12-20

We assume that during flights the amount of waste that is produced is limited. However, daily, approximately 8000 commercial airplanes fly above Europe's airspace while at the same time, more than 17,000 commercial flights exist in the entire world. Using primary data from airlines, which use the Larnaca's International Airport (LIA) in Cyprus, we have tried to understand why wastes are produced during a typical flight such as food waste, paper, and plastics, as well as how passengers affect the production of those wastes. The compositional analysis took place on 27 flights of 4 different airlines which used LIA as final destination. The evaluation indicated that the passenger's habits and ethics, and the policy of each airline produced different kinds of waste during the flights and especially food waste (FW). Furthermore, it was observed that the only waste management strategy that exists in place in the airport is the collection and the transportation of all those wastes from aircrafts and from the airport in the central unit for further treatment. Hence, this research indicated extremely difficulties to implement any specific waste minimization, or prevention practice or other sorting methods during the flights due to the limited time of the most flights (less than 3 h), the limited available space within the aircrafts, and the strictly safety roles that exist during the flights.

31 CFR 515.569 - Foreign passengers' baggage.

Science.gov (United States)

2010-07-01

..., Authorizations, and Statements of Licensing Policy § 515.569 Foreign passengers' baggage. The importation of Cuban-origin goods, otherwise prohibited by this part, brought into the United States as baggage by any person arriving in the United States other than a citizen or resident of the United States is hereby...

An open-access modeled passenger flow matrix for the global air network in 2010.

Science.gov (United States)

Huang, Zhuojie; Wu, Xiao; Garcia, Andres J; Fik, Timothy J; Tatem, Andrew J

2013-01-01

The expanding global air network provides rapid and wide-reaching connections accelerating both domestic and international travel. To understand human movement patterns on the network and their socioeconomic, environmental and epidemiological implications, information on passenger flow is required. However, comprehensive data on global passenger flow remain difficult and expensive to obtain, prompting researchers to rely on scheduled flight seat capacity data or simple models of flow. This study describes the construction of an open-access modeled passenger flow matrix for all airports with a host city-population of more than 100,000 and within two transfers of air travel from various publicly available air travel datasets. Data on network characteristics, city population, and local area GDP amongst others are utilized as covariates in a spatial interaction framework to predict the air transportation flows between airports. Training datasets based on information from various transportation organizations in the United States, Canada and the European Union were assembled. A log-linear model controlling the random effects on origin, destination and the airport hierarchy was then built to predict passenger flows on the network, and compared to the results produced using previously published models. Validation analyses showed that the model presented here produced improved predictive power and accuracy compared to previously published models, yielding the highest successful prediction rate at the global scale. Based on this model, passenger flows between 1,491 airports on 644,406 unique routes were estimated in the prediction dataset. The airport node characteristics and estimated passenger flows are freely available as part of the Vector-Borne Disease Airline Importation Risk (VBD-Air) project at: www.vbd-air.com/data.

Simulation of fuel demand for wood-gas in combustion engine

Directory of Open Access Journals (Sweden)

Botwinska Katarzyna

2017-01-01

Full Text Available In the era of the oil crisis and proceeding contamination of the natural environment, it is attempted to substitute fossil raw materials with alternative carriers. For many years, road transport has been considered as one of the main sources of the substances deteriorating air quality. Applicable European directives oblige the member states to implement biofuels and biocomponents into the general fuel market, however, such process is proceeding gradually and relatively slowly. So far, alternative fuels have been used on a large scale to substitute diesel fuel or petrol. Derivatives of vegetable raw materials, such as vegetable oils or their esters and ethanol extracted from biomass, are used to that end. It has been noticed that there is no alternative to LPG which, due to financial reasons, is more and more popular as fuel in passenger cars. In relation to solutions adopted in the past, it has been decided to analyse the option of powering a modern passenger car with wood gas - syngas. Such fuel has been practically used since the 1920's. To that end, a computer simulation created in SciLab environment was carried out. Passenger car Fiat Seicento, fitted with Fire 1.1 8V petrol engine with power of 40kW, whose parameters were used to prepare the model, was selected as the model vehicle. The simulation allows the determination of engine demand on the given fuel. Apart from the wood gas included in the title, petrol, methane and LPG were used. Additionally, the created model enables the determination of the engine power at the time of the indicated fuels supply. The results obtained in the simulation revealed considerable decrease in the engine power when the wood gas was supplied and the increased consumption of this fuel. On the basis of the analysis of the professional literature describing numerous inconveniences connected with the use of this fuel as well as the obtained results, it has been established that using the wood gas as alternative

Simulation of fuel demand for wood-gas in combustion engine

Science.gov (United States)

Botwinska, Katarzyna; Mruk, Remigiusz; Tucki, Karol; Wata, Mateusz

2017-10-01

In the era of the oil crisis and proceeding contamination of the natural environment, it is attempted to substitute fossil raw materials with alternative carriers. For many years, road transport has been considered as one of the main sources of the substances deteriorating air quality. Applicable European directives oblige the member states to implement biofuels and biocomponents into the general fuel market, however, such process is proceeding gradually and relatively slowly. So far, alternative fuels have been used on a large scale to substitute diesel fuel or petrol. Derivatives of vegetable raw materials, such as vegetable oils or their esters and ethanol extracted from biomass, are used to that end. It has been noticed that there is no alternative to LPG which, due to financial reasons, is more and more popular as fuel in passenger cars. In relation to solutions adopted in the past, it has been decided to analyse the option of powering a modern passenger car with wood gas - syngas. Such fuel has been practically used since the 1920's. To that end, a computer simulation created in SciLab environment was carried out. Passenger car Fiat Seicento, fitted with Fire 1.1 8V petrol engine with power of 40kW, whose parameters were used to prepare the model, was selected as the model vehicle. The simulation allows the determination of engine demand on the given fuel. Apart from the wood gas included in the title, petrol, methane and LPG were used. Additionally, the created model enables the determination of the engine power at the time of the indicated fuels supply. The results obtained in the simulation revealed considerable decrease in the engine power when the wood gas was supplied and the increased consumption of this fuel. On the basis of the analysis of the professional literature describing numerous inconveniences connected with the use of this fuel as well as the obtained results, it has been established that using the wood gas as alternative fuel is currently

Influence of unsteady aerodynamics on driving dynamics of passenger cars

Science.gov (United States)

Huemer, Jakob; Stickel, Thomas; Sagan, Erich; Schwarz, Martin; Wall, Wolfgang A.

2014-11-01

Recent approaches towards numerical investigations with computational fluid dynamics methods on unsteady aerodynamic loads of passenger cars identified major differences compared with steady-state aerodynamic excitations. Furthermore, innovative vehicle concepts such as electric-vehicles or hybrid drives further challenge the basic layout of passenger cars. Therefore, the relevance of unsteady aerodynamic loads on cross-wind stability of changing basic vehicle architectures should be analysed. In order to assure and improve handling and ride characteristics at high velocity of the actual range of vehicle layouts, the influence of unsteady excitations on the vehicle response was investigated. For this purpose, a simulation of the vehicle dynamics through multi-body simulation was used. The impact of certain unsteady aerodynamic load characteristics on the vehicle response was quantified and key factors were identified. Through a series of driving simulator tests, the identified differences in the vehicle response were evaluated regarding their significance on the subjective driver perception of cross-wind stability. Relevant criteria for the subjective driver assessment of the vehicle response were identified. As a consequence, a design method for the basic layout of passenger cars and chassis towards unsteady aerodynamic excitations was defined.

49 CFR 37.189 - Service requirement for OTRB demand-responsive systems.

Science.gov (United States)

2010-10-01

... normal reservation policies or to displace another passenger who has reserved a seat on the bus. The... all passengers to reserve space on the bus three months before the trip date. This requirement applies... passenger who is a wheelchair user would have to request an accessible bus at the time he or she made his...

E-Services and Positioning of Passenger Ports in the Context of Cruise Tourism Promotion

Directory of Open Access Journals (Sweden)

Andriela Vitić-Ćetković

2014-02-01

Full Text Available The paper positions the passenger sea ports in the context of cruise tourism on the basis of e-services they offer. The e-services of eleven passenger ports are categorized and then quantitatively evaluated by binary and ranking approaches. In general, the port e-services might be categorized according to their functionality as navigational, ship and passenger-related ones, logistics, business, marketing, entertainment, security, safety, environmental, etc. These services can be bidirectional informational and/or transactional. In this paper, only those port e-services related directly to the passengers’ needs, within the frame of cruise tourism, are taken into consideration and categorized as core, or as value-added ones, and as informational and/or transactional ones. Then, each of them is assigned an appropriate binary value (0/1, depending on whether the considered passenger port offers the related e-service or not. These values are employed in the evaluation of the analyzed passenger port e-services offered, and as a base for their positioning. The appropriate weights coefficients, obtained by ranking (Saaty method, were used in the process of the considered port final positioning on the cruise tourism e-market. Some additional analyses and recommendations in the direction of further positioning and promotion of the port of Kotor (Montenegro, as rising cruise tourism port (destination, are given as well.

Sulphur demand growing. [Alberta

Energy Technology Data Exchange (ETDEWEB)

1975-01-20

Sulfur markets look better going into 1975 than they have for several years, as North American demand growth is being filled largely by elemental sulfur producers and overseas. Demand is rising as fast as the capacity of Canadian transportation and handling facilities. It will take a long time to make much of a dent in the total Alberta stockpile of 14 million long tons at the end of 1974, with involuntary production from sour gas plants exceeding sales volume since 1972. However, there is some encouragement in the approaching peakout of production combined with a substantial increase in price since the low point of the cycle at the beginning of 1973, and a predicted rise of at least 20% in domestic (North American) sales this year over 1974.

Increasing the availability of urban passenger transport on objective ...

African Journals Online (AJOL)

Increasing the availability of urban passenger transport on objective control data ... mathematical modeling, probability theory and mathematical statistics, expert ... intended for development of methods and means of operative management of ...

Changes in the Trade and Promotion of Passenger Air Transport

Directory of Open Access Journals (Sweden)

Cornelia Petroman

2010-10-01

Full Text Available Passenger air carriers will be able to systematically overbook transport capacities on certain aerial routes due to the quick adaptation to modern trading means, to the modern promotion of services and to the modern means of information of potential travellers. Though ticket booking in aerial transport made its debut as a simple process of automation of ticket sale, it soon turned into a strong marketing instrument with unexpected effects on competitiveness on the market of tourism aerial transport. The use of modern ways of operating Computer Reservation Systems and Billing Settlement Plans by passenger air companies and by tour operators improves service standards.

46 CFR 78.47-45 - Markings for lifesaving appliances, instructions to passengers, and stowage locations.

Science.gov (United States)

2010-10-01

... 46 Shipping 3 2010-10-01 2010-10-01 false Markings for lifesaving appliances, instructions to...-45 Markings for lifesaving appliances, instructions to passengers, and stowage locations. Lifesaving appliances, instructions to passengers, and stowage locations must be marked in accordance with subchapter W...

Construction of Monitoring Model and Algorithm Design on Passenger Security during Shipping Based on Improved Bayesian Network

Science.gov (United States)

Wang, Jiali; Zhang, Qingnian; Ji, Wenfeng

2014-01-01

A large number of data is needed by the computation of the objective Bayesian network, but the data is hard to get in actual computation. The calculation method of Bayesian network was improved in this paper, and the fuzzy-precise Bayesian network was obtained. Then, the fuzzy-precise Bayesian network was used to reason Bayesian network model when the data is limited. The security of passengers during shipping is affected by various factors, and it is hard to predict and control. The index system that has the impact on the passenger safety during shipping was established on basis of the multifield coupling theory in this paper. Meanwhile, the fuzzy-precise Bayesian network was applied to monitor the security of passengers in the shipping process. The model was applied to monitor the passenger safety during shipping of a shipping company in Hainan, and the effectiveness of this model was examined. This research work provides guidance for guaranteeing security of passengers during shipping. PMID:25254227

An Integrated Rolling Stock Planning Model for the Copenhagen Suburban Passenger Railway

DEFF Research Database (Denmark)

Thorlacius, Per; Larsen, Jesper; Laumanns, Marco

A central issue for operators of passenger railways is providing sufficient number of seats for passengers while at the same time minimising operating costs. This is the task of rolling stock planning. Due to the large number of practical, railway specific requirements that a rolling stock plan has...... to take into account, rolling stock plans are often constructed in a step-by-step manner, taking some requirements into consideration in each step. This may make it difficult in the final step to produce a plan that is feasible with regard to all of the requirements and at the same time economically...... attractive. This paper proposes an integrated rolling stock planning model that simultaneously takes into account all practical requirements for rolling stock planning at DSB S-tog, the suburban passenger train operator of the City of Copenhagen. The model is then used to improve existing rolling stock plans...

An integrated rolling stock planning model for the Copenhagen suburban passenger railway

DEFF Research Database (Denmark)

Thorlacius, Per; Larsen, Jesper; Laumanns, Marco

2015-01-01

A central issue for operators of passenger railways is providing sufficient number of seats for passengers while at the same time minimising operating costs. This is the task of rolling stock planning. Due to the large number of practical, railway specific requirements that a rolling stock plan has...... to take into account, rolling stock plans are often constructed in a step-by-step manner, taking some requirements into consideration in each step. This may make it difficult in the final step to produce a plan that is feasible with regard to all of the requirements and at the same time economically...... attractive. This paper proposes an integrated rolling stock planning model that simultaneously takes into account all practical requirements for rolling stock planning at DSB S-tog, the suburban passenger train operator of the City of Copenhagen. The model is then used to improve existing rolling stock plans...

76 FR 41726 - Reporting Ancillary Airline Passenger Revenues

Science.gov (United States)

2011-07-15

...., third checked bag or more) Overweight/Oversized Baggage/Sports Equipment Carry-On Baggage 4. In-Flight Medical Equipment 5. In-Flight Entertainment/Internet Access 6. Sleep Sets 7. In-Flight Food/Non Alcoholic... baggage performance is outdated. Airline passengers would [[Page 41728

A comparison between the order and the volume fill rates for a base-stock inventory control system under a compound renewal demand process

OpenAIRE

Larsen, Christian; Thorstenson, Anders

2006-01-01

The order fill rate is less commonly used than the volume fill rate (most often just denoted fill rate) as a performance measure for inventory control systems. However, in settings where the focus is on filling customer orders rather than total quantities, the order fill rate should be the preferred measure. In this paper we consider a continuous review, base-stock policy, where all replenishment orders have the same constant lead time and all unfilled demands are backordered. We develop exac...

Driving decisions when leaving electronic music dance events: driver, passenger, and group effects.

Science.gov (United States)

Johnson, Mark B; Voas, Robert B; Miller, Brenda A

2012-01-01

The goal of this article was to identify characteristics of drivers and passengers that predicted peer groups whose drivers exit dance clubs with alcohol levels indicative of impairment (blood alcohol content [BAC] ≥ 0.05 g/dL). We used the portal survey methodology to randomly sample groups of electronic music dance event (EMDE) patrons as they entered and exited a club. From May through November 2010, data were collected from 38 EMDEs hosted by 8 clubs in the San Francisco Bay area. Data included in these analyses are results from breath samples for measuring BAC and self-report data on demographics, recent drinking history drinking, drinking intentions, travel to and from the clubs, and the familiarity/experience with other group members. These data were collected from a subset of 175 drivers and 272 passengers. Although drivers drank less than passengers, one driver in 5 groups had a BAC indicative of elevated crash risk (BAC ≥ 0.05 g/dL). Groups of drivers and/or passengers with a recent history of binge drinking were more likely to have drivers with BACs ≥ 0.05 g/dL. One unanticipated finding was that drivers who knew more group members relatively well were more likely to exit the club with a BAC ≥ 0.05 g/dL. Additionally, we found that groups with all female passengers were at greater risk for having a driver whose BAC was ≥ 0.05 g/dL. Some group characteristics predicted drivers who exit clubs with BACs ≥ 0.05 g/dL. One intervention strategy to promote safety might be to encourage group members to reconsider who is sober enough to drive away from the club; for some groups, a change of drivers would be a safer choice, because a passenger may have a relatively safe BAC. Groups of females appear to have a particularly elevated risk of having a driver whose BAC exceeds 0.05 g/dL, and new intervention efforts should be particularly directed to these at-risk groups.

Monitoring urban transport air pollution and energy demand in Rawalpindi and Islamabad using leap model

Energy Technology Data Exchange (ETDEWEB)

Shabbir, Rabia; Ahmad, Sheikh Saeed [Department of Environmental Sciences, Fatima Jinnah Women University, Rawalpindi (Pakistan)

2010-05-15

A research associated with urban transportation was carried out in Rawalpindi and Islamabad to analyze the status of emission of air pollutants and energy demands. The study included a discussion of past trends and future scenarios in order to reduce the future emissions. A simple model of passenger transport has been developed using computer based software called Long-Range Energy Alternatives Planning System (LEAP). The LEAP model was used to estimate total energy demand and the vehicular emissions for the base year 2000 and extrapolated till 2030 for the future predictions. Transport database in Rawalpindi and Islamabad, together with fuel consumption values for the vehicle types and emission factors of NO{sub x}, SO{sub 2} and PM{sub 10} corresponding to the actual vehicle types, formed the basis of the transport demand, energy consumption and total emission calculations. Apart from base scenario, the model was run under three alternative scenarios to study the impact of different urban transport policy initiatives that would reduce energy demand and emissions in transport sector of Rawalpindi and Islamabad. The prime objective was to arrive at an optimal transport policy, which limits the future growth of fuel consumption as well as air pollution. (author)

46 CFR 196.37-37 - Markings for lifesaving appliances, instructions to passengers, and stowage locations.

Science.gov (United States)

2010-10-01

... 46 Shipping 7 2010-10-01 2010-10-01 false Markings for lifesaving appliances, instructions to..., etc. § 196.37-37 Markings for lifesaving appliances, instructions to passengers, and stowage locations. Lifesaving appliances, instructions to passengers, and stowage locations must be marked in accordance with...

46 CFR 97.37-42 - Markings for lifesaving appliances, instructions to passengers, and stowage locations.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Markings for lifesaving appliances, instructions to..., Etc. § 97.37-42 Markings for lifesaving appliances, instructions to passengers, and stowage locations. Lifesaving appliances, instructions to passengers, and stowage locations must be marked in accordance with...

Air passenger transport and the greenhouse effect

International Nuclear Information System (INIS)

Hubert, M.

2004-11-01

The commercial aviation sector accounts for 2.5 % of total worldwide anthropogenic carbon dioxide (CO 2 ) emissions. Water vapour (H 2 O) and NO x emissions, the formation of condensation trails and increased formation of cirrus clouds due to altitude (indirect effects) also accentuate the greenhouse effect. The Intergovernmental Panel on Climate Change (IPCC) estimates that the effects apart from CO 2 emissions are relatively higher for aviation than for other human activities. For one tonne of CO 2 emissions, the radiative forcing of aviation is twice as important as other activities. On this basis, a Paris-New York return trip for one passenger on a charter flight corresponds to a quarter of the total climate impact caused by the annual consumption of a French person. Increased mobility and a rise in international tourism suggest that past trends in the growth of air passenger transport will continue. The improvements in energy efficiency achieved are seemingly not sufficient to prevent a significant increase in the impact of air transport on climate change. (author)

Assessment of the vibration on the foam legged and sheet metal-legged passenger seat

Directory of Open Access Journals (Sweden)

L. Dahil

2015-10-01

Full Text Available In this study, it was aim ed to decrease the vibration reaching to passenger from the legs of vehicle seats. In order to determine the levels of vibrations reaching at passengers, a test pad placed under the passenger seat was used, and HVM100 device was used for digitizing the information obtained. By transferring the vibration data to system by using HVM100 device, the acceleration graphics were prepared with Blaze software. As a result, it was determined that the acceleration values of seat legs made of foam material were lower than that of seat legs made of 2 mm thick sheet metal, so they damped the vibration better.

Improvement of the directional stability of passenger car trailer couplings with actively controlled steering

Science.gov (United States)

Desens, Jens

The stabilization of pendulum oscillations of passenger car trailer couplings, using active steering, was examined. A linear model of the couplings was presented. Each axle was provided with a controller. The controllers were optimized, with regard to necessary sensors, in order to minimize costs. The rear and the front axles were provided with a control unit in order to compute the potential prevailing in the active steering of several axles. It was shown that the passenger car rear axle was the most suitable for coupling stabilization. The experiment was simulated, using a complex coupling model. The developed controller allowed the passenger car trailer to be driven at a speed higher than 150 km per hour.

Long-run gasoline demand for passenger cars: the role of income distribution

International Nuclear Information System (INIS)

Storchmann, Karl

2005-01-01

It is commonly agreed that the level of income and prices are crucial determinants of the consumption of motor gasoline. The respective long run price and income elasticities are regularly calculated using cross sectional models. Despite the acknowledgement of the role of income distribution, it plays no role in intercountry cross sectional models. This is due to a lack of appropriate data. This paper shows that the omission of distributional characteristics provides misleading elasticities. Using available distributional measures this paper is referring to an income threshold, which is crucial to the acquisition of an automobile. It is shown that on the one hand, in poor countries an unequal income distribution is needed to enable at least some people to buy automobiles. On the other hand, in wealthy countries an unequal income distribution would exclude some people from acquiring automobiles. Hence, depending on the income level, inequality has a diverging impact on the ability to buy durable goods. The second part of this paper develops a pooled 90-country model to examine this approach empirically. It could be shown that distribution variables are highly significant to explain the demand for automobiles and motor gasoline. Moreover, the consideration of the distribution of income leads to a considerable decrease in income elasticity values. This is mainly due to the positive correlation between income level and income equality within the sample

Fast Heuristics for Delay Management with Passenger Rerouting

NARCIS (Netherlands)

T.A.B. Dollevoet (Twan); D. Huisman (Dennis)

2011-01-01

textabstractDelay management models determine which connections should be maintained in case of a delayed feeder train. Recently, delay management models are developed that take into account that passengers will adjust their routes when they miss a connection. However, for large-scale real-world

Activity Demands During Multi-Directional Team Sports: A Systematic Review.

Science.gov (United States)

Taylor, Jeffrey B; Wright, Alexis A; Dischiavi, Steven L; Townsend, M Allison; Marmon, Adam R

2017-12-01

Late-stage rehabilitation programs often incorporate 'sport-specific' demands, but may not optimally simulate the in-game volume or intensity of such activities as sprinting, cutting, jumping, and lateral movement. The aim of this review was to characterize, quantify, and compare straight-line running and multi-directional demands during sport competition. A systematic review of PubMed, CINAHL, SPORTDiscus, and Cochrane Central Register of Controlled Trials databases was conducted. Studies that reported time-motion analysis data on straight-line running, accelerations/decelerations, activity changes, jumping, cutting, or lateral movement over the course of an entire competition in a multi-directional sport (soccer, basketball, lacrosse, handball, field hockey, futsal, volleyball) were included. Data was organized based on sport, age level, and sex and descriptive statistics of the frequency, intensity, time, and volume of the characteristics of running and multi-directional demands were extracted from each study. Eighty-one studies were included in the review (n = 47 soccer, n = 11 basketball, n = 9 handball, n = 7 field hockey, n = 3 futsal, n = 4 volleyball). Variability of sport demand data was found across sports, sexes, and age levels. Specifically, soccer and field hockey demanded the most volume of running, while basketball required the highest ratio of high-intensity running to sprinting. Athletes change activity between 500 and 3000 times over the course of a competition, or once every 2-4 s. Studies of soccer reported the most frequent cutting (up to 800 per game), while studies of basketball reported the highest frequency of lateral movement (up to 450 per game). Basketball (42-56 per game), handball (up to 90 per game), and volleyball (up to 35 per game) were found to require the most jumping. These data may provide an incomplete view of an athlete's straight-line running load, considering that only competition and not practice data was

[The peculiar features of conducting comprehensive expertises of the injuries inflicted inside the passenger car compartment].

Science.gov (United States)

Fetisov, V A; Gusarov, A A; Smirenin, S A

2016-01-01

The present article deals with the problem of forensic medical diagnostics of the injuries inflicted inside the passenger car compartment during motor vehicle accidents. The authors place special emphasis on the fact of a significant increase in the number of road traffic accidents (RTA) with such consequences throughout the world. The modern automobile industry pays much attention to the enhancement of the car safety features by significantly improving the design of passenger compartments. It accounts for a change in the traditional character of the injuries to both the driver and the passengers resulting from motor vehicle accidents. This, in turn, creates difficulties for the forensic medical experts as regards personality identification of the subjects who happened to be inside the car at the moment of the collision especially in the case of unascertainable circumstances of the accident and/or the involvement of several victims. The authors describe peculiarities of the injuries inflicted inside the passenger car compartment during road traffic accidents including such that result from bringing the driver and the passengers closer to the construction elements of the car (stage I), their direct contact with these elements (stage II), and subsequent displacement (stage III).

The Role of Customer Engagement in Enhancing Passenger Loyalty in IndonesianAirline Industry: Relationship Marketing Approach

Directory of Open Access Journals (Sweden)

Raditha Hapsari

2015-09-01

Full Text Available Scholars and practitioners agree that organisations cannot rely on transactional marketing since customers demand more personalized goods and services. Consequently, organisations need to build a relationships based on a mutual exchange with their customers to satisfy their needs and wants and customer relationship emerged to enhance long-term customer profitability. Customer perceived value have been widely accepted as important antecedents improving customer loyalty. However, only a few published studies have the integrated customer engagement construct with the other important marketing constructs to examine the interrelationship among them. This research aims to examine the interrelationships among perceived value, customer engagement and customer loyalty. Focus group discussions, and a survey of 250 Indonesian airline passengers in East Java Province, Indonesia, were conducted to satisfy the research objectives. In order to carry out a comprehensive investigation of the relationship between variables, a quantitative approach is used in this study. The methods used to analyse the data are Confirmatory Factor Analysis (CFA to test the model fit and Structural Equation Modelling (SEM to test the hypothesis. Sobel’s test is also used to test the mediating role of customer engagement. The findings of this study indicate while customer perceived value consistently influences loyalty, customer engagement is also proven to be an antecedent of loyalty. Furthermore, customer engagement is also proven to play a mediating role which strengthens the relationship between perceived value and loyalty. The results of the empirical analysis is supported by previous studies that suggest customer engagement is a new construct that has an important role to play in enhancing passenger loyalty.

Driver injury in near- and far-side impacts: Update on the effect of front passenger belt use.

Science.gov (United States)

Parenteau, Chantal S; Viano, David C

2018-04-03

This is a study that updates earlier research on the influence of a front passenger on the risk for severe driver injury in near-side and far-side impacts. It includes the effects of belt use by the driver and passenger, identifies body regions involved in driver injury, and identifies the sources for severe driver head injury. 1997-2015 NASS-CDS data were used to investigate the risk for Maximum Abbreviated Injury Scale (MAIS) 4 + F driver injury in near-side and far-side impacts by front passenger belt use and as a sole occupant in the driver seat. Side impacts were identified with GAD1 = L or R without rollover (rollover ≤ 0). Front-outboard occupants were included without ejection (ejection = 0). Injury severity was defined by MAIS and fatality (F) by TREATMNT = 1 or INJSEV = 4. Weighted data were determined. The risk for MAIS 4 + F was determined using the number of occupants with known injury status MAIS 0 + F. Standard errors were determined. Overall, belted drivers had greater risks for severe injury in near-side than far-side impacts. As a sole driver, the risk was 0.969 ± 0.212% for near-side and 0.313 ± 0.069% for far-side impacts (P impacts. The risk was 2.17 times greater with an unbelted passenger (NS). The driver's risk was 0.782 ± 0.431% with an unbelted passenger and 0.361% ± 0.114% with a belted passenger in far-side impacts. The risk was 1.57 times greater with an unbelted passenger (P impacts, the leading sources for AIS 4+ head injury were the left B-pillar, roof, and other vehicle. For far-side impacts, the leading sources were the other occupant, right interior, and roof (8.5%). Seat belt use by a passenger lowered the risk of severe driver injury in side impacts. The reduction was 54% in near-side impacts and 36% in far-side impacts. Belted drivers experienced mostly head and thoracic AIS 4+ injuries. Head injuries in the belted drivers were from contact with the side interior and the other occupant, even with a belted passenger.

The contribution to the greenhouse effect by passenger cars and heating is increasing

International Nuclear Information System (INIS)

Bouchereau, J.M.

2000-12-01

Between 1990 and 1998, the domestic sector contribution to the greenhouse effect increased from 25 % to 27 %. During this period, there was a 20 % rise in greenhouse gas emissions from passenger cars. These emissions amounted to 20 million tonnes of carbon equivalent out of a total of 175 million tonnes in 1998 (all sectors taken together). Carbon dioxide emissions from the tertiary sector increased by 2,3 % annually between 1980 and 1998, particularly as a result of increased road freight transport. Although technological progress has been made on fuel consumption of vehicles, greater use of passenger cars combined with decreasing running costs has led to gross emissions in France being 2 % more in 1998 than in 1990. In 1998, the transport sector (passenger cars and freight transport) was responsible for three-quarters of this increase. (author)

CAD/CAE-technologies application for assessment of passenger safety on railway transport in emergency

Science.gov (United States)

Antipin, D. Ya; Shorokhov, S. G.; Bondarenko, O. I.

2018-03-01

A possibility of using current software products realizing CAD/CAE-technologies for the assessment of passenger safety in emergency cases on railway transport has been analyzed. On the basis of the developed solid computer model of an anthropometric dummy, the authors carried out an analysis of possible levels of passenger injury during accident collision of a train with an obstacle.

Increasing fuel efficiency of passenger cars with the “climate-control” system as a method of improving the ecological safety of the urban infrastructure

Science.gov (United States)

Burakova, L. N.; Burakova, A. D.; Burakova, O. D.; Dovbysh, V. O.

2018-01-01

Motor vehicle should provide safety and a high ecological standard of living for the population. One of the methods to improve the ecological friendliness of motor vehicles in particular passenger cars (cars), which are considered in this article, is the growth of their fuel economy. It is established that fuel consumption and the amount of specific emissions of harmful substances with exhaust gases of cars when using the “climate control” system depend on the effective ambient temperature, the color of the opaque car body elements, the power of the car engine and the interior volume. However, the simplest controlled factor is the color of the opaque car body elements, which is characterized by the coefficient of light reflection. In the course of experimental studies, we established the dependences of a change in fuel consumption and a share of reducing emissions of harmful substances with exhaust gases of passenger cars with the “climate control” system on the coefficient of light reflection. A method has been developed to reduce fuel consumption and the amount of specific emissions of harmful substances with the exhaust gases of passenger cars when using the “climate control” system, which involves painting the vehicle roof white and allows reducing fuel consumption by 5.5-10.3% and the amount of specific emissions of harmful substances by 0.37-1.13% (CO) and 0.47-1.08% (CH).

Trends in income and price elasticities of transport demand (1850–2010)

International Nuclear Information System (INIS)

Fouquet, Roger

2012-01-01

The purpose of this paper is to estimate trends in income and price elasticities and to offer insights for the future growth in transport use, with particular emphasis on the impact of energy and technological transitions. The results indicate that income and price elasticities of passenger transport demand in the United Kingdom were very large (3.1 and −1.5, respectively) in the mid-nineteenth century, and declined since then. In 2010, long run income and price elasticity of aggregate land transport demand were estimated to be 0.8 and −0.6. These trends suggest that future elasticities related to transport demand in developed economies may decline very gradually and, in developing economies, where elasticities are often larger, they will probably decline more rapidly as the economies develop. Because of the declining trends in elasticities, future energy and technological transitions are not likely to generate the growth rates in energy consumption that occurred following transitions in the nineteenth century. Nevertheless, energy and technological transitions, such as the car and the airplane, appear to have delayed and probably will delay declining trends in income and price elasticity of aggregate transport demand. - Highlights: ► Estimates trends in income and price elasticities of aggregate UK land transport demand (1850–2010). ► Income and price elasticities were very large in late 1800s and declined since then. ► In 2010, they were estimated to be 0.8 and −0.6. ► Future elasticities are likely to decline gradually in developed economies and faster in developing economies. ► Energy transitions may delay the decline in elasticities.

Passenger Transportation and Travel Curriculum Guide. Final Report.

Science.gov (United States)

Lininger, Carol

This curriculum guide provides materials for a course in passenger transportation and travel. The four-credit, competency-based program provides students with skills necessary to obtain employment in the aviation industry, travel agencies, hotel/motel management, and car rental agencies. An overview of vocational-technical education at the school…

14 CFR 382.129 - What other requirements apply when passengers' wheelchairs, other mobility aids, and other...

Science.gov (United States)

2010-01-01

... passengers' wheelchairs, other mobility aids, and other assistive devices must be disassembled for stowage... Stowage of Wheelchairs, Other Mobility Aids, and Other Assistive Devices § 382.129 What other requirements apply when passengers' wheelchairs, other mobility aids, and other assistive devices must be...

An epidemiological study of rates of illness in passengers and crew at a busy Caribbean cruise port.

Science.gov (United States)

Marshall, Cathy Ann; Morris, Euclid; Unwin, Nigel

2016-04-12

The Caribbean has one of the largest cruise ship industries in the world, with close to 20 million visitors per year. The potential for communicable disease outbreaks on vessels and the transmission by ship between countries is high. Barbados has one of the busiest ports in the Caribbean. Our aim was to describe and analyse the epidemiology of illnesses experienced by passengers and crew arriving at the Bridgetown Port, Barbados between 2009 and 2013. Data on the illnesses recorded were extracted from the passenger and crew arrival registers and passenger and crew illness logs for all ships and maritime vessels arriving at Barbados' Ports and passing through its territorial waters between January 2009 and December 2013. Data were entered into an Epi Info database and most of the analysis undertaken using Epi Info Version 7. Rates per 100,000 visits were calculated, and confidence intervals on these were derived using the software Openepi. There were 1031 cases of illness from over 3 million passenger visits and 1 million crew visits during this period. The overall event rate for communicable illnesses was 15.7 (95 % CI 14.4-17.1) per 100,000 passengers, and for crew was 24.0 (21.6-26.6) per 100, 000 crew. Gastroenteritis was the predominant illness experienced by passengers and crew followed by influenza. The event rate for gastroenteritis among passengers was 13.7 (12.5-15.0) per 100,000 and 14.4 (12.6, 16.5) for crew. The event rate for non-communicable illnesses was 3.4 per 100,000 passengers with myocardial infarction being the main diagnosis. The event rate for non-communicable illnesses among crew was 2.1 per 100,000, the leading cause being injuries. The predominant illnesses reported were gastroenteritis and influenza similar to previous published reports from around the world. This study is the first of its type in the Caribbean and the data provide a baseline for future surveillance and for comparison with other countries and regions.

The flight of the Passenger Pigeon: phylogenetics and biogeographic history of an extinct species.

Science.gov (United States)

Johnson, Kevin P; Clayton, Dale H; Dumbacher, John P; Fleischer, Robert C

2010-10-01

The human-caused extinction of the Passenger Pigeon (Ectopistes migratorius) is one of the best known and documented of any bird. This event was particularly alarming because the Passenger Pigeon went from being one of the most numerous avian species in the world to extinct in a period of decades, when the last individual died in captivity in a Cincinnati Zoo in 1914. While a great deal of information exists on the likely direct and indirect causes of its demise, as well as information on life-history, the phylogenetic relationships of this species have been subject to considerable speculation. Here we use DNA sequences obtained from museum specimens to resolve the phylogenetic position of this species with respect to other pigeons and doves (Columbiformes). We show that the Passenger Pigeon is not related to the New World mourning doves (Zenaida) as many authors have suggested, but is the sister taxon of all other New World pigeons (Patagioenas). Biogeographic analysis suggests the Passenger Pigeon lineage may have colonized North America from Asia, and subsequently dispersed into South America, leading to a more extensive radiation of New World pigeons. Copyright 2010. Published by Elsevier Inc.

Designing interior space for drivers of passenger vehicle

Directory of Open Access Journals (Sweden)

Spasojević-Brkić Vesna K.

2014-01-01

Full Text Available The current study is a review of our previous papers with certain improvements, so it proves the hypothesis that passenger vehicles are still not sufficiently adapted to man in terms of ergonomics, especially from the aspect of interior space. In the ergonomic adjustment of passenger vehicles, the limits of anthropomeasures and technical limitations, are the most important. The methodology mainly uses operative investigations, and the 'man-vehicle' system is optimized within existing limitations. Here, we also explain original methodology for modeling that space. The fact that there is a point '0' as the origin point of a coordinate system with x, y and z axes of the man-vehicle system, which can be considered to be more or less fixed, enabled us to determine more accurately the mechanical and mathematical codependence in this system. The paper also proves that the anthropomeasures of length have mechanical and mathematical functions which also determine the width, i.e. all three dimensions and provides the design of the space behind the windscreen glass, the position of the steering wheel and the position of the foot commands with space for feet and knees determined, as well as the total space which the driver occupies. It is proved that the floor-ceiling height of a vehicle is primarily affected by the anthropomeasures of seating height and lower leg, while width is affected by the anthropomeasures of lower and upper leg and only then by shoulder width, so that the interior space for the driver of a passenger vehicle is 1250 mm and the width for knees spread at seat level is 926 mm maximum.

Direct energy rebound effect for road passenger transport in China: A dynamic panel quantile regression approach

International Nuclear Information System (INIS)

Zhang, Yue-Jun; Peng, Hua-Rong; Liu, Zhao; Tan, Weiping

2015-01-01

The transport sector appears a main energy consumer in China and plays a significant role in energy conservation. Improving energy efficiency proves an effective way to reduce energy consumption in transport sector, whereas its effectiveness may be affected by the rebound effect. This paper proposes a dynamic panel quantile regression model to estimate the direct energy rebound effect for road passenger transport in the whole country, eastern, central and western China, respectively, based on the data of 30 provinces from 2003 to 2012. The empirical results reveal that, first of all, the direct rebound effect does exist for road passenger transport and on the whole country, the short-term and long-term direct rebound effects are 25.53% and 26.56% on average, respectively. Second, the direct rebound effect for road passenger transport in central and eastern China tends to decrease, increase and then decrease again, whereas that in western China decreases and then increases, with the increasing passenger kilometers. Finally, when implementing energy efficiency policy in road passenger transport sector, the effectiveness of energy conservation in western China proves much better than that in central China overall, while the effectiveness in central China is relatively better than that in eastern China. - Highlights: • The direct rebound effect (RE) for road passenger transport in China is estimated. • The direct RE in the whole country, eastern, central, and western China is analyzed. • The short and long-term direct REs are 25.53% and 26.56% within the sample period. • Western China has better energy-saving performance than central and eastern China.

The energy demand in the Narino Department

International Nuclear Information System (INIS)

Unidad de Planeacion Minero Energetica, UPME

2000-01-01

In the object of making a first approach of regional energy requirements analysis and the good way of satisfying them, the UPME undertook a global energy study for the Narino Department. In this study (UPME 1999) was carried out an analysis of the energy demand and of the socioeconomic factors that determine it; they were also studied the consumptions and the current energy offer and the alternatives of future evolution, with the purpose of having the basic tools of a departmental energy plan. The present article refers specifically to the analysis of the demand and it seeks to show the readers the complexity and the volume of necessary information to carry out the demand studies. They are multiple factors that determine the energy demand in the Narino Department. The size, growth populations, geographical distribution and cultural characteristic, the border condition, the faulty infrastructure of communications, the agricultural economic structure and the low entrance per capita

49 CFR 1331.5 - Additional standards for retaining antitrust immunity by passenger bus industry rate bureaus.

Science.gov (United States)

2010-10-01

... immunity by passenger bus industry rate bureaus. 1331.5 Section 1331.5 Transportation Other Regulations... standards for retaining antitrust immunity by passenger bus industry rate bureaus. (a) Rate bureaus must... tariff structure modifies in a relatively non-uniform fashion the relationship between most rates...

Modeling the effect of operator and passenger characteristics on the fatality risk of motorcycle crashes.

Science.gov (United States)

Tavakoli Kashani, Ali; Rabieyan, Rahim; Besharati, Mohammad Mehdi

2016-01-01

In Iran more than 25% of crash fatalities belong to motorcycle operators and passengers in the recent years, from which about 20% are related to passenger fatalities. The aim of this study was to investigate the motorcycle operator and passenger characteristics as well as other contributory factors that may affect the fatality risk of motorcyclists involved in traffic crashes. To this end, motorcycle crash data between 2009 and 2012 was extracted from Iran traffic crash database and a logistic regression analysis was performed to obtain odds ratio estimates for each of the study variables. The fatality risk of motorcyclists has a direct relationship with the number of pillion passengers carried. Results also indicate that the amount of increase in the likelihood of having a fatality in a motorcycles crash is considerably higher when the operator is accompanied by a male passenger of the same age. Furthermore, results showed that if the crash is occurred in the darkness, on curves, in rural areas and on highways, then the crash would be more likely to be fatal. Moreover, the head-on collisions, older operators, unlicensed operators and not using a safety helmet were found to increase the likelihood of a fatality in a motorcycle crash. Preventative measures such as, imposing stricter rules regarding safety helmet usage and confining the number of pillion passengers to one, might be implemented to reduce the fatality risk in motorcycle crashes. In addition, more appropriate infrastructures for penalizing offending motorcyclists could also reduce the frequency of law violations such as not wearing helmet or riding without motorcycle license, which in turn, would result into a reduction in the fatality risk of motorcycle crashes. © 2016 KUMS, All rights reserved.

Practice Oriented Algorithmic Disruption Management in Passenger Railways

NARCIS (Netherlands)

J.C. Wagenaar (Joris)

2016-01-01

markdownabstractHow to deal with a disruption is a question railway companies face on a daily basis. This thesis focusses on the subject how to handle a disruption such that the passenger service is upheld as much as possible. The current mathematical models for disruption management can not yet be

Demand and supply in Russian gas market

International Nuclear Information System (INIS)

Milovidov, K.N.

1997-01-01

The big volume of gas supplies for current and future energy and natural gas balances in Russia is important to understand the likely future dynamics of demand for gas. The path of future demand in Russia is uncertain and the range of possible scenarios is wide. For creating the new gas consumption structure, more deep diversification and development of the gas distribution systems, large investments and considerable periods of time are necessary. The factors usually studied in detail in the conditions of market economy can not be used here as a basis for strategic planning due to several reasons. (R.P.)

Examining the Relationship Between Passenger Airline Aircraft Maintenance Outsourcing and Aircraft Safety

Science.gov (United States)

Monaghan, Kari L.

The problem addressed was the concern for aircraft safety rates as they relate to the rate of maintenance outsourcing. Data gathered from 14 passenger airlines: AirTran, Alaska, America West, American, Continental, Delta, Frontier, Hawaiian, JetBlue, Midwest, Northwest, Southwest, United, and USAir covered the years 1996 through 2008. A quantitative correlational design, utilizing Pearson's correlation coefficient, and the coefficient of determination were used in the present study to measure the correlation between variables. Elements of passenger airline aircraft maintenance outsourcing and aircraft accidents, incidents, and pilot deviations within domestic passenger airline operations were analyzed, examined, and evaluated. Rates of maintenance outsourcing were analyzed to determine the association with accident, incident, and pilot deviation rates. Maintenance outsourcing rates used in the evaluation were the yearly dollar expenditure of passenger airlines for aircraft maintenance outsourcing as they relate to the total airline aircraft maintenance expenditures. Aircraft accident, incident, and pilot deviation rates used in the evaluation were the yearly number of accidents, incidents, and pilot deviations per miles flown. The Pearson r-values were calculated to measure the linear relationship strength between the variables. There were no statistically significant correlation findings for accidents, r(174)=0.065, p=0.393, and incidents, r(174)=0.020, p=0.793. However, there was a statistically significant correlation for pilot deviation rates, r(174)=0.204, p=0.007 thus indicating a statistically significant correlation between maintenance outsourcing rates and pilot deviation rates. The calculated R square value of 0.042 represents the variance that can be accounted for in aircraft pilot deviation rates by examining the variance in aircraft maintenance outsourcing rates; accordingly, 95.8% of the variance is unexplained. Suggestions for future research include

Emergency department visits by pediatric patients sustained as a passenger on a motorcycle.

Science.gov (United States)

Tadros, Allison; Owen, Stephanie; Hoffman, Shelley M; Davis, Stephen M; Sharon, Melinda J

2018-01-02

Currently only 5 out of the 50 states in the United States have laws restricting the age of passengers permitted to ride on a motorcycle. This study sought to characterize the visits by patients under the age of 16 to U.S. emergency departments (EDs) for injuries sustained as a passenger on a motorcycle. In this retrospective cohort study, data were obtained from the Nationwide Emergency Department Sample (NEDS) for the years 2006 to 2011. Pediatric patients who were passengers on a motorcycle that was involved in a crash were identified using International Classification of Diseases, Ninth Revision (ICD-9) External Cause of Injury codes. We also examined gender, age, disposition, regional differences, common injuries, and charges. Between 2006 and 2011 there were an estimated 9,689 visits to U.S. EDs by patients under the age of 16 who were passengers on a motorcycle involved in a crash. The overall average patient age was 9.4 years, and they were predominately male (54.5%). The majority (85%) of these patients were treated and released. The average charges for discharged patients were $2,116.50 and amounted to roughly $17,500,000 during the 6 years. The average cost for admission was $51,446 per patient and totaled over $54 million. The most common primary injuries included superficial contusions; sprains and strains; upper limb fractures; open wounds of head, neck, and trunk; and intracranial injuries. Although there were only about 9,700 visits to U.S. EDs for motorcycle crashes involving passengers less than 16 years old for 2006 to 2011, the total cost of visits that resulted in either ED discharge or hospital admission amounted to over $71 million.

Choosing the tariff for city passenger transportation in Kiev

OpenAIRE

Pilipenko, N.

2006-01-01

This article deals with basic problems of tariff policy of city passenger transportations by busses fleets of communal pattern ownership in Kiev. Principles of perfection of method of calculation of tariffs have been offered by introduction of rout and unique tariff.

Disruption Management of Rolling Stock in Passenger Railway Transportation

NARCIS (Netherlands)

L.K. Nielsen (Lars Kjaer); G. Maróti (Gábor)

2009-01-01

textabstractThis paper deals with real-time disruption management of rolling stock in passenger railway transportation. We present a generic framework for modeling disruptions in railway rolling stock schedules. The framework is presented as an online combinatorial decision problem where the

Volume and outcome of organ transplantation

NARCIS (Netherlands)

Banta, H.D.; Engel, G.L.; Schersten, T.

1992-01-01

In general, technically demanding medical procedures are associated with better outcomes when they are carried out in institutions and by physicians with higher volumes of practice. This paper examines the evidence for a volume-outcome relationship in the case of organ transplantation. Although few

Design for air-to-air refuelling operations; new passenger and tanker aircraft design for AAR scenarios

NARCIS (Netherlands)

Li, M.O.

2014-01-01

Air-to-air refuelling is a way to improve fuel efficiency of the overall transport system without waiting for the improvement of basic aviation technology. To take full advantage of such an operation, both passenger aircraft and tanker aircraft (which deliver required fuel to the passenger aircraft

46 CFR 115.620 - Description of the Alternative Hull Examination (AHE) Program for certain passenger vessels.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Description of the Alternative Hull Examination (AHE... ACCOMMODATIONS FOR MORE THAN 49 PASSENGERS INSPECTION AND CERTIFICATION Hull and Tailshaft Examinations § 115.620 Description of the Alternative Hull Examination (AHE) Program for certain passenger vessels. The Alternative...

ANALYTICAL ESTIMATION OF MINIMUM AND MAXIMUM TIME EXPENDITURES OF PASSENGERS AT AN URBAN ROUTE STOP

Directory of Open Access Journals (Sweden)

Gorbachov, P.

2013-01-01

Full Text Available This scientific paper deals with the problem related to the definition of average time spent by passengers while waiting for transport vehicles at urban stops as well as the results of analytical modeling of this value at traffic schedule unknown to the passengers and of two options of the vehicle traffic management on the given route.

Master equation approach to the intra-urban passenger flow and application to the Metropolitan Seoul Subway system

Energy Technology Data Exchange (ETDEWEB)

Lee, Keumsook [Department of Geography, Sungshin University, Seoul 136-742 (Korea, Republic of); Goh, Segun; Choi, M Y [Department of Physics and Astronomy and Center for Theoretical Physics, Seoul National University, Seoul 151-747 (Korea, Republic of); Park, Jong Soo [School of Information Technology, Sungshin University, Seoul 136-742 (Korea, Republic of); Jung, Woo-Sung, E-mail: kslee@sungshin.ac.kr, E-mail: mychoi@snu.ac.kr [Department of Physics and Basic Science Research Institute, Pohang University of Science and Technology, Pohang 790-784 (Korea, Republic of)

2011-03-18

The master equation approach is proposed to describe the evolution of passengers in a subway system. With the transition rate constructed from simple geographical consideration, the evolution equation for the distribution of subway passengers is found to bear skew distributions including log-normal, Weibull, and power-law distributions. This approach is then applied to the Metropolitan Seoul Subway system: analysis of the trip data of all passengers in a day reveals that the data in most cases fit well to the log-normal distributions. Implications of the results are also discussed.

Master equation approach to the intra-urban passenger flow and application to the Metropolitan Seoul Subway system

International Nuclear Information System (INIS)

Lee, Keumsook; Goh, Segun; Choi, M Y; Park, Jong Soo; Jung, Woo-Sung

2011-01-01

The master equation approach is proposed to describe the evolution of passengers in a subway system. With the transition rate constructed from simple geographical consideration, the evolution equation for the distribution of subway passengers is found to bear skew distributions including log-normal, Weibull, and power-law distributions. This approach is then applied to the Metropolitan Seoul Subway system: analysis of the trip data of all passengers in a day reveals that the data in most cases fit well to the log-normal distributions. Implications of the results are also discussed.

New fuel consumption standards for Chinese passenger vehicles and their effects on reductions of oil use and CO2 emissions of the Chinese passenger vehicle fleet

International Nuclear Information System (INIS)

Wang Zhao; Jin Yuefu; Wang Michael; Wei Wu

2010-01-01

A new fuel consumption standard for passenger vehicles in China, the so-called Phase 3 standard, was approved technically in 2009 and will take effect in 2012. This standard aims to introduce advanced energy-saving technologies into passenger vehicles and to reduce the average fuel consumption rate of Chinese new passenger vehicle fleet in 2015 to 7 L/100 km. The Phase 3 standard follows the evaluating system by specifying fuel consumption targets for sixteen individual mass-based classes. Different from compliance with the Phases 1 and 2 fuel consumption standards, compliance of the Phase 3 standard is based on corporate average fuel consumption (CAFC) rates for individual automobile companies. A transition period from 2012 to 2014 is designed for manufacturers to gradually adjust their production plans and introduce fuel-efficient technologies. In this paper, we, the designers of the Phase 3 standard, present the design of the overall fuel consumption reduction target, technical feasibility, and policy implications of the Phase 3 standard. We also explore several enforcement approaches for the Phase 3 standard with financial penalties of non-compliance as a priority. Finally, we estimate the overall effect of the Phase 3 standard on oil savings and CO 2 emission reductions.

76 FR 27897 - Security and Safety Zone Regulations, Large Passenger Vessel Protection, Captain of the Port...

Science.gov (United States)

2011-05-13

... DEPARTMENT OF HOMELAND SECURITY Coast Guard 33 CFR Part 165 [Docket No. USCG-2011-0342] Security and Safety Zone Regulations, Large Passenger Vessel Protection, Captain of the Port Columbia River... will enforce the security and safety zone in 33 CFR 165.1318 for large passenger vessels operating in...

China's fuel economy standards for passenger vehicles. Rationale, policy process, and impacts

International Nuclear Information System (INIS)

Oliver, Hongyan H.; Gallagher, Kelly Sims; Tian, Donglian; Zhang, Jinhua

2009-01-01

China issued its first Fuel Economy Standards (FES) for light-duty passenger vehicles (LDPV) in September 2004, and the first and second phases of the FES took effective in July 2005 and January 2008, respectively. The stringency of the Chinese FES ranks third globally, following the Japanese and European standards. In this paper, we first review the policy-making background, including the motivations, key players, and the process; and then explain the content and the features of the FES and why there was no compliance flexibility built into it. Next, we assess the various aspects of the standard's impact, including fuel economy improvement, technology changes, shift of market composition, and overall fuel savings. Lastly, we comment on the prospect of tightening the existing FES and summarize the complementary policies that have been adopted or may be considered by the Chinese government for further promoting efficient vehicles and reducing transport energy consumption. The Chinese experience is highly relevant for countries that are also experiencing or anticipating rapid growth in personal vehicles, those wishing to moderate an increase in oil demand, or those desirous of vehicle technology upgrades. (author)

Maintenance in Railway Rolling Stock Rescheduling for Passenger Railways

NARCIS (Netherlands)

J.C. Wagenaar (Joris); L.G. Kroon (Leo)

2015-01-01

textabstractThis paper addresses the Rolling Stock Rescheduling Problem (RSRP), while taking maintenance appointments into account. After a disruption, the rolling stock of passenger trains has to be rescheduled in order to maintain a feasible rolling stock circulation. A limited number of rolling

Consumer preferences in the design of airport passenger areas

NARCIS (Netherlands)

Van Oel, C.J.; Van den Berkhof, F.W.

2013-01-01

In recent decades, commercial developments have become increasingly important for the overall profit of airports. However, little is known about consumer preferences regarding the design of passenger areas, which is striking as the design of terminal buildings affects consumers' emotional state and

Renewable Electricity Futures Study. Volume 3: End-Use Electricity Demand

Energy Technology Data Exchange (ETDEWEB)

Hostick, D.; Belzer, D.B.; Hadley, S.W.; Markel, T.; Marnay, C.; Kintner-Meyer, M.

2012-06-01

The Renewable Electricity Futures (RE Futures) Study investigated the challenges and impacts of achieving very high renewable electricity generation levels in the contiguous United States by 2050. The analysis focused on the sufficiency of the geographically diverse U.S. renewable resources to meet electricity demand over future decades, the hourly operational characteristics of the U.S. grid with high levels of variable wind and solar generation, and the potential implications of deploying high levels of renewables in the future. RE Futures focused on technical aspects of high penetration of renewable electricity; it did not focus on how to achieve such a future through policy or other measures. Given the inherent uncertainties involved with analyzing alternative long-term energy futures as well as the multiple pathways that might be taken to achieve higher levels of renewable electricity supply, RE Futures explored a range of scenarios to investigate and compare the impacts of renewable electricity penetration levels (30%-90%), future technology performance improvements, potential constraints to renewable electricity development, and future electricity demand growth assumptions. RE Futures was led by the National Renewable Energy Laboratory (NREL) and the Massachusetts Institute of Technology (MIT).

Predicting traffic volumes and estimating the effects of shocks in massive transportation systems.

Science.gov (United States)

Silva, Ricardo; Kang, Soong Moon; Airoldi, Edoardo M

2015-05-05

Public transportation systems are an essential component of major cities. The widespread use of smart cards for automated fare collection in these systems offers a unique opportunity to understand passenger behavior at a massive scale. In this study, we use network-wide data obtained from smart cards in the London transport system to predict future traffic volumes, and to estimate the effects of disruptions due to unplanned closures of stations or lines. Disruptions, or shocks, force passengers to make different decisions concerning which stations to enter or exit. We describe how these changes in passenger behavior lead to possible overcrowding and model how stations will be affected by given disruptions. This information can then be used to mitigate the effects of these shocks because transport authorities may prepare in advance alternative solutions such as additional buses near the most affected stations. We describe statistical methods that leverage the large amount of smart-card data collected under the natural state of the system, where no shocks take place, as variables that are indicative of behavior under disruptions. We find that features extracted from the natural regime data can be successfully exploited to describe different disruption regimes, and that our framework can be used as a general tool for any similar complex transportation system.

Data Science in Supply Chain Management: Data-Related Influences on Demand Planning

Science.gov (United States)

Jin, Yao

2013-01-01

Data-driven decisions have become an important aspect of supply chain management. Demand planners are tasked with analyzing volumes of data that are being collected at a torrential pace from myriad sources in order to translate them into actionable business intelligence. In particular, demand volatilities and planning are vital for effective and…

Bus accident severity and passenger injury: evidence from Denmark

DEFF Research Database (Denmark)

Prato, Carlo Giacomo; Kaplan, Sigal

2014-01-01

Purpose Bus safety is a concern not only in developing countries, but also in the U.S. and Europe. In Denmark, disentangling risk factors that are positively or negatively related to bus accident severity and injury occurrence to bus passengers can contribute to promote safety as an essential...... principle of sustainable transit and advance the vision “every accident is one too many”. Methods Bus accident data were retrieved from the national accident database for the period 2002–2011. A generalized ordered logit model allows analyzing bus accident severity and a logistic regression enables...... examining occurrence of injury to bus passengers. Results Bus accident severity is positively related to (i) the involvement of vulnerable road users, (ii) high speed limits, (iii) night hours, (iv) elderly drivers of the third party involved, and (v) bus drivers and other drivers crossing in yellow or red...

Peak oil demand: the role of fuel efficiency and alternative fuels in a global oil production decline.

Science.gov (United States)

Brandt, Adam R; Millard-Ball, Adam; Ganser, Matthew; Gorelick, Steven M

2013-07-16

Some argue that peak conventional oil production is imminent due to physical resource scarcity. We examine the alternative possibility of reduced oil use due to improved efficiency and oil substitution. Our model uses historical relationships to project future demand for (a) transport services, (b) all liquid fuels, and (c) substitution with alternative energy carriers, including electricity. Results show great increases in passenger and freight transport activity, but less reliance on oil. Demand for liquids inputs to refineries declines significantly after 2070. By 2100 transport energy demand rises >1000% in Asia, while flattening in North America (+23%) and Europe (-20%). Conventional oil demand declines after 2035, and cumulative oil production is 1900 Gbbl from 2010 to 2100 (close to the U.S. Geological Survey median estimate of remaining oil, which only includes projected discoveries through 2025). These results suggest that effort is better spent to determine and influence the trajectory of oil substitution and efficiency improvement rather than to focus on oil resource scarcity. The results also imply that policy makers should not rely on liquid fossil fuel scarcity to constrain damage from climate change. However, there is an unpredictable range of emissions impacts depending on which mix of substitutes for conventional oil gains dominance-oil sands, electricity, coal-to-liquids, or others.

Time Series Forecasting of the Number of Malaysia Airlines and AirAsia Passengers

Science.gov (United States)

Asrah, N. M.; Nor, M. E.; Rahim, S. N. A.; Leng, W. K.

2018-04-01

The standard practice in forecasting process involved by fitting a model and further analysis on the residuals. If we know the distributional behaviour of the time series data, it can help us to directly analyse the model identification, parameter estimation, and model checking. In this paper, we want to compare the distributional behaviour data from the number of Malaysia Airlines (MAS) and AirAsia passenger’s. From the previous research, the AirAsia passengers are govern by geometric Brownian motion (GBM). The data were normally distributed, stationary and independent. Then, GBM was used to forecast the number of AirAsia passenger’s. The same methods were applied to MAS data and the results then were compared. Unfortunately, the MAS data were not govern by GBM. Then, the standard approach in time series forecasting will be applied to MAS data. From this comparison, we can conclude that the number of AirAsia passengers are always in peak season rather than MAS passengers.

Addressing the minimum fleet problem in on-demand urban mobility.

Science.gov (United States)

Vazifeh, M M; Santi, P; Resta, G; Strogatz, S H; Ratti, C

2018-05-01

Information and communication technologies have opened the way to new solutions for urban mobility that provide better ways to match individuals with on-demand vehicles. However, a fundamental unsolved problem is how best to size and operate a fleet of vehicles, given a certain demand for personal mobility. Previous studies 1-5 either do not provide a scalable solution or require changes in human attitudes towards mobility. Here we provide a network-based solution to the following 'minimum fleet problem', given a collection of trips (specified by origin, destination and start time), of how to determine the minimum number of vehicles needed to serve all the trips without incurring any delay to the passengers. By introducing the notion of a 'vehicle-sharing network', we present an optimal computationally efficient solution to the problem, as well as a nearly optimal solution amenable to real-time implementation. We test both solutions on a dataset of 150 million taxi trips taken in the city of New York over one year 6 . The real-time implementation of the method with near-optimal service levels allows a 30 per cent reduction in fleet size compared to current taxi operation. Although constraints on driver availability and the existence of abnormal trip demands may lead to a relatively larger optimal value for the fleet size than that predicted here, the fleet size remains robust for a wide range of variations in historical trip demand. These predicted reductions in fleet size follow directly from a reorganization of taxi dispatching that could be implemented with a simple urban app; they do not assume ride sharing 7-9 , nor require changes to regulations, business models, or human attitudes towards mobility to become effective. Our results could become even more relevant in the years ahead as fleets of networked, self-driving cars become commonplace 10-14 .

Demand prediction model for regional railway services considering spatial effects between stations

Energy Technology Data Exchange (ETDEWEB)

Cordera Piñera, R.; Sañudo, R.; Olio, L. Dell' ; Ibeas, A.

2016-07-01

The railways are a priority transport mode for the European Union given their safety record and environmental sustainability. Therefore it is important to have quantitative models available which allow passenger demand for rail travel to be simulated for planning purposes and to evaluate different policies. The aim of this article is to specify and estimate trip distribution models between railway stations by considering the most influential demand variables. Two types of models were estimated: Poisson regression and gravity. The input data were the ticket sales on a regional line in Cantabria (Spain) which were provided by the Spanish railway infrastructure administrator (ADIF – RAM). The models have also considered the possible existence of spatial effects between train stations. The results show that the models have a good fit to the available data, especial the gravity models constrained by origins and destinations. Furthermore, the gravity models which considered the existence of spatial effects between stations had a significantly better fit than the Poisson models and the gravity models that did not consider this phenomenon. The proposed models have therefore been shown to be good support tools for decision making in the field of railway planning. (Author)

IMPROVEMENT OF LIFE SUPPORT SYSTEMS OF PASSENGER ROLLING STOCK: PATENT REVIEW

Directory of Open Access Journals (Sweden)

S. R. Kolesnykov

2018-02-01

Full Text Available Purpose. Inventors and researchers of the world are focused on improvements of basic life support systems including provision of quality microclimate parameters in a car of the rolling stock. The research is aimed at reviewing and analyzing patents in the field of climate comfort, heating, ventilation and air conditioning (CCHVAC of railway passenger cars (the chronological framework: 2011-2017 from the date of publication. Мethodology. During the study there were reviewed patents (foreign and domestic ones in the field of CCHVAC in passenger vehicles, in particular railway cars, their optimization and ways of managing them. Patent search was carried out according to certain search criteria: keywords, time frames and in various patent systems of the world. An interdisciplinary approach was used. Findings. Based on the search results, 157 patents were found, 21 documents of which were selected for analysis. Patents are systematized into three groups: "New technical and technological solutions in systems and functioning facilities of HVAC ", "New and improved solutions for HVAC system management in a vehicle", "Air ozonation in passenger cars". It is established that all patents have one of the aspects that have solutions to the issues of more environmentally friendly, energy efficient and safe application of CCHVAC systems in railway transport. Originality. It was proved a high level of link penetration in various technical fields, which include patents with CCHVAC. It is established that it is characteristic for them to designate the majority of patent solutions for use not in the purely railway industry, but in transport in general. Practical value. Confirmation of the high level of link penetration in various technical fields will make it possible to reflect technical problems with CCHVAC and technologies for their solution throughout the world. This will contribute to a more intensive technological upgrade in the improvement of life support

Computation of order and volume fill rates for a base stock inventory control system with heterogeneous demand to investigate which customer class gets the best service

OpenAIRE

Larsen, Christian

2006-01-01

We consider a base stock inventory control system serving two customer classes whose demands are generated by two independent compound renewal processes. We show how to derive order and volume fill rates of each class. Based on assumptions about first order stochastic dominance we prove when one customer class will get the best service. That theoretical result is validated through a series of numerical experiments which also reveal that it is quite robust.

An epidemiological study of rates of illness in passengers and crew at a busy Caribbean cruise port

Directory of Open Access Journals (Sweden)

Cathy Ann Marshall

2016-04-01

Full Text Available Abstract Background The Caribbean has one of the largest cruise ship industries in the world, with close to 20 million visitors per year. The potential for communicable disease outbreaks on vessels and the transmission by ship between countries is high. Barbados has one of the busiest ports in the Caribbean. Our aim was to describe and analyse the epidemiology of illnesses experienced by passengers and crew arriving at the Bridgetown Port, Barbados between 2009 and 2013. Methods Data on the illnesses recorded were extracted from the passenger and crew arrival registers and passenger and crew illness logs for all ships and maritime vessels arriving at Barbados’ Ports and passing through its territorial waters between January 2009 and December 2013. Data were entered into an Epi Info database and most of the analysis undertaken using Epi Info Version 7. Rates per 100,000 visits were calculated, and confidence intervals on these were derived using the software Openepi. Results There were 1031 cases of illness from over 3 million passenger visits and 1 million crew visits during this period. The overall event rate for communicable illnesses was 15.7 (95 % CI 14.4–17.1 per 100,000 passengers, and for crew was 24.0 (21.6–26.6 per 100, 000 crew. Gastroenteritis was the predominant illness experienced by passengers and crew followed by influenza. The event rate for gastroenteritis among passengers was 13.7 (12.5–15.0 per 100,000 and 14.4 (12.6, 16.5 for crew. The event rate for non-communicable illnesses was 3.4 per 100,000 passengers with myocardial infarction being the main diagnosis. The event rate for non-communicable illnesses among crew was 2.1 per 100,000, the leading cause being injuries. Conclusions The predominant illnesses reported were gastroenteritis and influenza similar to previous published reports from around the world. This study is the first of its type in the Caribbean and the data provide a baseline for future surveillance

Toward a Shared Urban Transport System Ensuring Passengers & Goods Cohabitation

Directory of Open Access Journals (Sweden)

Anna Trentini

2010-07-01

Full Text Available The paper presents radical new urban transportation system concepts, potentially allowing changing the economic and environmental costs of passenger and freight transportation. The driver focuses on the concept of sharing, which means to make a joint use of transport resources, between passengers and goods flows. From a field observation of several existing solutions, an inductive reasoning enables us to move from a set of specific facts to establish an archetype for a radical new urban transportation system. Once the archetype defined, it is translated in real life through the example of the On Route proposal for London. The research frame of this paper is the ANR C-Goods (City Goods Operation Optimization using Decision support System project. Started in February 2009 the project involves four partners , and will end on 2011.

THE FUTURE OF PASSENGER AIR TRANSPORT – VERY LARGE AIRCRAFT AND OUT KEY HUMAN FACTORS AFFECTING THE OPERATION AND SAFETY OF PASSENGER AIR TRANSPORT

Directory of Open Access Journals (Sweden)

Petra Skolilova

2017-12-01

Full Text Available The article outlines some human factors affecting the operation and safety of passenger air transport given the massive increase in the use of the VLA. Decrease of the impact of the CO2 world emissions is one of the key goals for the new aircraft design. The main wave is going to reduce the burned fuel. Therefore, the eco-efficiency engines combined with reasonable economic operation of the aircraft are very important from an aviation perspective. The prediction for the year 2030 says that about 90% of people, which will use long-haul flights to fly between big cities. So, the A380 was designed exactly for this time period, with a focus on the right capacity, right operating cost and right fuel burn per seat. There is no aircraft today with better fuel burn combined with eco-efficiency per seat, than the A380. The very large aircrafts (VLAs are the future of the commercial passenger aviation. Operating cost versus safety or CO2 emissions versus increasing automation inside the new generation aircraft. Almost 80% of the world aircraft accidents are caused by human error based on wrong action, reaction or final decision of pilots, the catastrophic failures of aircraft systems, or air traffic control errors are not so frequent. So, we are at the beginning of a new age in passenger aviation and the role of the human factor is more important than ever.

Self-propelled pedestrian dynamics model: Application to passenger movement and infection propagation in airplanes

OpenAIRE

Namilae, S.; Srinivasan, A.; Mubayi, A.; Scotch, M.; Pahle, R.

2017-01-01

Reducing the number of contacts between passengers on an airplane can potentially curb the spread of infectious diseases. In this paper, a social force based pedestrian movement model is formulated and applied to evaluate the movement and contacts among passengers during boarding and deplaning of an airplane. Within the social force modeling framework, we introduce location dependence on the self-propelling momentum of pedestrian particles. The model parameters are varied over a large design ...

Telemedical Maritime Assistance Service (TMAS) to Swedish merchant and passengers ships 1997-2012

DEFF Research Database (Denmark)

Westlund, Karin; Attvall, Stig; Nilsson, Ralph

2016-01-01

BACKGROUND: Telemedical Maritime Assistance Service (TMAS) for seafarers and traveling passengers is important and can be crucial for the optimal medical treatment on board ships. The aim of this study was to analyse and to compare the data from consultations and evacuations from merchant ships...... Classification for Primary Care (ICPC-2). The distribution of symptoms, accidents and diseases, treatments/actions taken, evacuations and the communication forms were analysed. RESULTS: One thousand ninety-five contacts for seafarers from merchant ships and 651 passenger patients from Swedish ferries were...

Consumer Demand for Healthy Diet: New Evidence from the Healthy Eating Index

OpenAIRE

Gao, Zhifeng; Yu, Xiaohua; Lee, Jonq-Ying

2011-01-01

A large volume of literature has been focusing on the measure of diet quality and consumer demand for food. However, little has estimated consumer demand for diet quality. In this article, we systematically estimate consumer demand for diet quality using the healthy eating index (HEI) developed by the U.S. Department of Agriculture. The Results show that consumers have insufficient consumption of the food containing dark green, orange vegetable, legumes and total grain. Age and education have...

The effect on road load due to variations in valid coast down tests for passenger cars

NARCIS (Netherlands)

Mensch, P. van; Ligterink, N.E.; Cuelenaere, R.F.A.

2014-01-01

Real-world CO2 emissions of passenger cars very often deviate from the Type Approval value. The Type Approval value for CO2 emissions of passenger cars is based on a chassis dynamometer test in a laboratory. The total vehicle resistance of a vehicle, or 'road load', is simulated on the chassis

Fuel economy of new passenger cars in Mexico: Trends from 1988 to 2008 and prospects

International Nuclear Information System (INIS)

Sheinbaum-Pardo, Claudia; Chávez-Baeza, Carlos

2011-01-01

This paper analyzes trends in fuel economy (kilometers per liter) of new passenger vehicles in Mexico over a period of 20 years from 1988 to 2008. Results show that in this period, fuel economy of the new passenger vehicle fleet, including multipurpose vehicles (a category similar to sport utility vehicles, SUVs), increased by only 6.3%. A simple Laspeyres index analysis was developed to evaluate both the impact of changes in vehicle sales structure by category and the changes in fuel economy. Results show that increased sales of heavier, multipurpose vehicles in place of subcompact and compact vehicles, impacted negatively on the fleet average fuel economy. If the structure of sales had continued in the same proportions across all categories as in 1988, fuel economy would have increased by 11.0%, instead of the actual 6.3%. This result coincides with trends in other countries. The paper also presents different scenarios of passenger car fuel economy for the year 2020, and its implications for gasoline consumption and CO 2 emissions. The results may influence the new passenger vehicle fuel economy standard that is currently under discussion in Mexico.

Power plant site evaluation, electric energy demand forecasts - Douglas Point Site. Volume 3. Final report

International Nuclear Information System (INIS)

Wilson, J.W.

1975-07-01

This is part of a series of reports containing an evaluation of the proposed Douglas Point nuclear generating station site located on the Potomac River in Maryland 30 miles south of Washington, D.C. This report contains chapters on the Potomac Electric Power Company's market, forecasting future demand, modelling, a residential demand model, a nonresidential demand model, the Southern Maryland Electric Cooperative Model, short term predictive accuracy, and total system requirements

Competitive Position of Dependent Passenger Car Maintenance Companies – Influences, Developments and Challenges in the German Market

Directory of Open Access Journals (Sweden)

Werdich Karl

2015-06-01

Full Text Available The presented paper concerns itself with passenger car maintenance companies and their competitiveness. Internal and external influences, change drivers and general changes in the companies and their organisation were identified and analysed. The influence of the development of technology and the diffusion of innovations are highlighted in particular. Under consideration of the competitiveness factors, current and future challenges for the passenger car maintenance companies were worked out. Based on these analyses, future tasks, problem statements and challenges were compiled for passenger car maintenance companies from which other subjects of scientific investigation in area of strategic and economic importance arose.

Outline of energy (electricity) supply and demand outlook in Asian APEC countries

International Nuclear Information System (INIS)

Fujime, Kazuya

1995-01-01

Oil: Japan's oil demand is projected to be on a gradual decline in the future due to implementation of policy measures aimed at achieving that objective, while consumption of oil in three areas - China, NIES and six ASEAN countries -- is projected to increase to reach a level nearly three times as large as Japan's demand by 2010. Supply of oil in the region is projected to level off, making it necessary for the region to increase its reliance on other areas for additional volumes of oil supply. Coal: Demand for coal is projected to grow against a background of expansion of coal-fired power generation. Coal demand in China, in particular, is projected to grow to such an extent that China may become a net coal importer, thus having a great impact on coal supply and demand in Asian countries. Natural gas: Demand for natural gas is projected to grow in the region, centering on NIES and ASEAN countries. Although production in ASEAN countries is expected to increase, the region is anticipated to increase its reliance on other areas for natural gas supply from medium - and long term perspectives. Oil products: Demand for oil products is projected to grow due to stepped-up industrialization and motorization in China, NIES and ASEAN countries. From medium - and long-term perspectives, considerable volumes of additional oil product supply will become necessary, unless large-scale refineries are newly built or expanded within the region centering on China. (author)

76 FR 55335 - Alternate Passenger Rail Service Pilot Program

Science.gov (United States)

2011-09-07

... provides that the proposed pilot program would not be made available to more than two Amtrak intercity... operation; provisions for accommodating the traveling public, including proposed arrangements for stations... program developed by this part will not be made available to more than two Amtrak intercity passenger rail...

Assessment of Passenger Satisfaction with Public Bus Transport Services: A Case Study of Lucknow City (India

Directory of Open Access Journals (Sweden)

Singh Sanjay

2016-12-01

Full Text Available The main aim of this study is threefold. First, it tries to assess the passenger satisfaction with public bus transport services in the city of Lucknow in India. Second, it tries to examine the service quality attributes that influence the passenger satisfaction. Third, it tries to evaluate the relative importance of service quality attributes to find out the priority for service quality improvements to enhance passenger satisfaction. The study is based on a survey of objective as well as subjective questions conducted between May and July 2014. Five major bus stops of Lucknow were selected for the survey. Total 148 respondents were randomly selected to elicit their overall satisfaction and factors that influence their satisfaction in the use of public bus transport services in Lucknow using a self-rated questionnaire. The collected sample of responses is subjected to principal component analysis, a statistical technique for dimensionality reduction of the dataset, and descriptive analysis. The result of theses analyses shows that passengers are mostly dissatisfied with public bus transport services in Lucknow. Using principal component analysis, five underlying factors were extracted that influenced passenger satisfaction with public bus transport services in the city. Out of these five factors, comfort and safety has the greatest impact on overall satisfaction, followed by the adequacy of capacity of public bus transport services, orderly and clean environment inside buses, elegant design of buses and bus stops, and accessibility to public bus transport services in the city. The study thus provides a direction for public bus transport administration in the city to understand the gaps that exist and try to fill them to improve its services so that passenger satisfaction can be enhanced and consequently more people can be attracted towards public bus transport.

Renewable Electricity Futures Study. Volume 3. End-Use Electricity Demand

Energy Technology Data Exchange (ETDEWEB)

Hostick, Donna [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Belzer, David B. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hadley, Stanton W. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Markel, Tony [National Renewable Energy Lab. (NREL), Golden, CO (United States); Marnay, Chris [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Kintner-Meyer, Michael [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2012-06-15

The Renewable Electricity Futures (RE Futures) Study investigated the challenges and impacts of achieving very high renewable electricity generation levels in the contiguous United States by 2050. The analysis focused on the sufficiency of the geographically diverse U.S. renewable resources to meet electricity demand over future decades, the hourly operational characteristics of the U.S. grid with high levels of variable wind and solar generation, and the potential implications of deploying high levels of renewables in the future. RE Futures focused on technical aspects of high penetration of renewable electricity; it did not focus on how to achieve such a future through policy or other measures. Given the inherent uncertainties involved with analyzing alternative long-term energy futures as well as the multiple pathways that might be taken to achieve higher levels of renewable electricity supply, RE Futures explored a range of scenarios to investigate and compare the impacts of renewable electricity penetration levels (30%–90%), future technology performance improvements, potential constraints to renewable electricity development, and future electricity demand growth assumptions. RE Futures was led by the National Renewable Energy Laboratory (NREL) and the Massachusetts Institute of Technology (MIT). Learn more at the RE Futures website. http://www.nrel.gov/analysis/re_futures/

Rapid jetting status inspection and accurate droplet volume measurement for a piezo drop-on-demand inkjet print head using a scanning mirror for display applications

Science.gov (United States)

Shin, Dong-Youn; Kim, Minsung

2017-02-01

Despite the inherent fabrication simplicity of piezo drop-on-demand inkjet printing, the non-uniform deposition of colourants or electroluminescent organic materials leads to faulty display products, and hence, the importance of rapid jetting status inspection and accurate droplet volume measurement increases from a process perspective. In this work, various jetting status inspections and droplet volume measurement methods are reviewed by discussing their advantages and disadvantages, and then, the opportunities for the developed prototype with a scanning mirror are explored. This work demonstrates that jetting status inspection of 384 fictitious droplets can be performed within 17 s with maximum and minimum measurement accuracies of 0.2 ± 0.5 μ m for the fictitious droplets of 50 μ m in diameter and -1.2 ± 0.3 μ m for the fictitious droplets of 30 μ m in diameter, respectively. In addition to the new design of an inkjet monitoring instrument with a scanning mirror, two novel methods to accurately measure the droplet volume by amplifying a minute droplet volume difference and then converting to other physical properties are suggested and the droplet volume difference of ±0.3% is demonstrated to be discernible using numerical simulations, even with the low measurement accuracy of 1 μ m . When the fact is considered that the conventional vision-based method with a CCD camera requires the optical measurement accuracy less than 25 nm to measure the volume of an in-flight droplet in the nominal diameter of 50 μ m at the same volume measurement accuracy, the suggested method with the developed prototype offers a whole new opportunity to inkjet printing for display applications.

Costs of mitigating CO2 emissions from passenger aircraft

Science.gov (United States)

Schäfer, Andreas W.; Evans, Antony D.; Reynolds, Tom G.; Dray, Lynnette

2016-04-01

In response to strong growth in air transportation CO2 emissions, governments and industry began to explore and implement mitigation measures and targets in the early 2000s. However, in the absence of rigorous analyses assessing the costs for mitigating CO2 emissions, these policies could be economically wasteful. Here we identify the cost-effectiveness of CO2 emission reductions from narrow-body aircraft, the workhorse of passenger air transportation. We find that in the US, a combination of fuel burn reduction strategies could reduce the 2012 level of life cycle CO2 emissions per passenger kilometre by around 2% per year to mid-century. These intensity reductions would occur at zero marginal costs for oil prices between US$50-100 per barrel. Even larger reductions are possible, but could impose extra costs and require the adoption of biomass-based synthetic fuels. The extent to which these intensity reductions will translate into absolute emissions reductions will depend on fleet growth.

Energy saving and CO2 mitigation through restructuring Jordan's transportation sector: The diesel passenger cars scenario

International Nuclear Information System (INIS)

Al-Hinti, I.; Al-Ghandoor, A.; Akash, B.; Abu-Nada, E.

2007-01-01

The transportation sector is responsible for 37% of the total final energy consumption in Jordan, with passenger cars taking a share of 57% in this sector. Improvement of the energy efficiency of the transportation sector can help in alleviating socio-economic pressures resulting from the inflating fuel bill and in lowering the relatively high CO 2 emission intensity. Current legislations mandate that all passenger cars operating in Jordan are to be powered with spark ignition engines using gasoline fuel. This paper examines potential benefits that can be achieved through the introduction of diesel cars to the passenger cars market in Jordan. Three scenarios are suggested for implementation and investigated with a forecasting model on the basis of local and global trends over the period 2007-2027. It is demonstrated that introducing diesel passenger cars can slow down the growth of energy consumption in the transportation sector resulting in significant savings in the national fuel bill. It is also shown that this is an effective and feasible option for cutting down CO 2 emissions

75 FR 16562 - High-Speed Intercity Passenger Rail (HSIPR) Program

Science.gov (United States)

2010-04-01

...), passenger traffic and services (marketing, ticketing, station, and on- board services), and general... retention, ``green'' environmental outcomes, potential energy savings, and effects on community livability. Program Management Approach--A phased program implementation strategy including a preliminary description...

The Research on Safety Management Information System of Railway Passenger Based on Risk Management Theory

Science.gov (United States)

Zhu, Wenmin; Jia, Yuanhua

2018-01-01

Based on the risk management theory and the PDCA cycle model, requirements of the railway passenger transport safety production is analyzed, and the establishment of the security risk assessment team is proposed to manage risk by FTA with Delphi from both qualitative and quantitative aspects. The safety production committee is also established to accomplish performance appraisal, which is for further ensuring the correctness of risk management results, optimizing the safety management business processes and improving risk management capabilities. The basic framework and risk information database of risk management information system of railway passenger transport safety are designed by Ajax, Web Services and SQL technologies. The system realizes functions about risk management, performance appraisal and data management, and provides an efficient and convenient information management platform for railway passenger safety manager.

Demand Forecast of Petroleum Product Consumption in the Chinese Transportation Industry

Directory of Open Access Journals (Sweden)

Shouyang Wang

2012-03-01

Full Text Available In this paper, petroleum product (mainly petrol and diesel consumption in the transportation sector of China is analyzed. This was based on the Bayesian linear regression theory and Markov Chain Monte Carlo method (MCMC, establishing a demand-forecast model of petrol and diesel consumption introduced into the analytical framework with explanatory variables of urbanization level, per capita GDP, turnover of passengers (freight in aggregate (TPA, TFA, and civilian vehicle number (CVN and explained variables of petrol and diesel consumption. Furthermore, we forecast the future consumer demand for oil products during “The 12th Five Year Plan” (2011–2015 based on the historical data covering from 1985 to 2009, finding that urbanization is the most sensitive factor, with a strong marginal effect on petrol and diesel consumption in this sector. From the viewpoint of prediction interval value, urbanization expresses the lower limit of the predicted results, and CVN the upper limit of the predicted results. Predicted value from other independent variables is in the range of predicted values which display a validation range and reference standard being much more credible for policy makers. Finally, a comparison between the predicted results from autoregressive integrated moving average models (ARIMA and others is made to assess our task.

MobiCat - a solar-electrical passenger boat; MobiCat solar-elektrisches Passagierschiff

Energy Technology Data Exchange (ETDEWEB)

Minder, R.

2003-07-01

This final report for the Swiss Federal Office of Energy presents the results of the 'MobiCat' project which included the design, construction and operation of a solar-electric powered passenger ship for inland waterways. The vessel is of a catamaran with a length of 33 m and a width of 11 m. The electrical energy is produced by a 20 kW{sub p} array of photovoltaic panels and stored in two 480 V lead-acid battery blocks rated at 240 Ah each. The ship is powered by two 81 kW industrial AC drives. With a passenger capacity of 150 persons MobiCat is the largest solar-powered ship world-wide. The report discusses the generally positive operational experience and the wide interest both by the public and the media that the project has attracted. The MobiCat has become the most popular charter ship on the lake of Biel/Bienne in Switzerland. The author states that the ultimate goals of the project - to demonstrate the feasibility of large solar-powered passenger ships and to present new sustainable mobility solutions on inland waterways - have been fully reached.

Controlling air pollution from passenger ferries: cost-effectiveness of seven technological options.

Science.gov (United States)

Farrell, Alexander E; Corbett, James J; Winebrake, James J

2002-12-01

Continued interest in improving air quality in the United States along with renewed interest in the expansion of urban passenger ferry service has created concern about air pollution from ferry vessels. This paper presents a methodology for estimating the air pollution emissions from passenger ferries and the costs of emissions control strategies. The methodology is used to estimate the emissions and costs of retrofitting or re-powering ferries with seven technological options (combinations of propulsion and emission control systems) onto three vessels currently in service in San Francisco Bay. The technologies include improved engine design, cleaner fuels (including natural gas), and exhaust gas cleanup devices. The three vessels span a range of ages and technologies, from a 25-year-old monohull to a modern, high-speed catamaran built only four years ago. By looking at a range of technologies, vessel designs, and service conditions, a sense of the broader implications of controlling emissions from passenger ferries across a range of vessels and service profiles is provided. Tier 2-certified engines are the most cost-effective choice, but all options are cost-effective relative to other emission control strategies already in place in the transportation system.

Optimizing renewable energy, demand response and energy storage to replace conventional fuels in Ontario, Canada

International Nuclear Information System (INIS)

Richardson, David B.; Harvey, L.D. Danny

2015-01-01

Electricity systems with high penetrations of renewable energy require a mix of resources to balance supply with demand, and to maintain safe levels of system reliability. A load balancing methodology is developed to determine the optimal lowest-cost mix of renewable energy resources, demand response, and energy storage to replace conventional fuels in the Province of Ontario, Canada. Three successive cumulative scenarios are considered: the displacement of fossil fuel generation, the planned retirement of an existing nuclear reactor, and the electrification of the passenger vehicle fleet. The results show that each of these scenarios is achievable with energy generation costs that are not out of line with current and projected electricity generation costs. These transitions, especially that which proposes the electrification of the vehicle fleet, require significant investment in new generation, with installed capacities much higher than that of the current system. Transitions to mainly renewable energy systems require changes in our conceptualization of, and approach to, energy system planning. - Highlights: • Model three scenarios to replace conventional fuels with renewables, storage and DR (demand response). • Determine optimal low-cost mix of resources for each scenario. • Scenarios require much higher installed capacities than current system. • Energy transitions require changes in approach to energy system planning.

75 FR 68021 - Draft Finding of No Significant Impact on the Tier 1 Ohio 3C Quick Start Passenger Rail Tier-1...

Science.gov (United States)

2010-11-04

... purpose of the 3C ``Quick Start'' Passenger Rail Project is to reestablish intercity conventional speed... predictable and consistent travel times. It is intended to provide travel options and develop the passenger... through the High Speed Intercity Passenger Rail Program (HSIPR Program) administered by the FRA and funded...

Causal analysis of passenger train accidents on freight rail corridors.

Science.gov (United States)

2013-11-01

A number of economic, technical and political factors have limited the development of new, dedicated, very-high-speed rail systems in North America. Consequently, most, near-term development of improved or expanded passenger rail service in the U.S. ...

Economic and demographic impacts of passenger rail systems : the impact of intercity passenger rails on population and employment change in the United States, 2000-2010.