Organ acquisition cost centers Part I: medicare regulations--truth or consequence.

Science.gov (United States)

Abecassis, M

2006-12-01

Organ Acquisition Cost Centers (OACC) were designed to encourage and incentivize hospitals to provide transplantation services. The purpose of this article (Part I) is to familiarize transplant professionals and transplant center administrators with the regulations that govern OACC. An historical perspective of the evolution of these regulations is necessary to better understand the basic principles underlying this complex area of transplant finance. There is a wide variation in transplant center OACC reporting, suggesting under-reporting by some and overreporting by others. Correct reporting is essential since OACC are auditable. We have surveyed 13 audits by the Office of the Inspector General (OIG) of transplant center OACC in an attempt to identify trends in reporting practices by transplant centers that are not deemed acceptable by the OIG. We discuss these findings in the context of some basic definitions that refer specifically to cost accounting principles necessary for accurate reporting of OACC.

CNC Turning Center Operations and Prove Out. Computer Numerical Control Operator/Programmer. 444-334.

Science.gov (United States)

Skowronski, Steven D.

This student guide provides materials for a course designed to instruct the student in the recommended procedures used when setting up tooling and verifying part programs for a two-axis computer numerical control (CNC) turning center. The course consists of seven units. Unit 1 discusses course content and reviews and demonstrates set-up procedures…

RoboCon: A general purpose telerobotic control center

Energy Technology Data Exchange (ETDEWEB)

Draper, J.V.; Noakes, M.W. [Oak Ridge National Lab., TN (United States). Robotics and Process Systems Div.; Schempf, H. [Carnegie Mellon Univ., Pittsburgh, PA (United States); Blair, L.M. [Human Machine Interfaces, Inc., Knoxville, TN (United States)

1997-02-01

This report describes human factors issues involved in the design of RoboCon, a multi-purpose control center for use in US Department of Energy remote handling applications. RoboCon is intended to be a flexible, modular control center capable of supporting a wide variety of robotic devices.

RoboCon: A general purpose telerobotic control center

International Nuclear Information System (INIS)

Draper, J.V.; Noakes, M.W.; Blair, L.M.

1997-01-01

This report describes human factors issues involved in the design of RoboCon, a multi-purpose control center for use in US Department of Energy remote handling applications. RoboCon is intended to be a flexible, modular control center capable of supporting a wide variety of robotic devices

Pediatric issues in disaster management, part 2: evacuation centers and family separation/reunification.

Science.gov (United States)

Mace, Sharon E; Sharieff, Ghazala; Bern, Andrew; Benjamin, Lee; Burbulys, Dave; Johnson, Ramon; Schreiber, Merritt

2010-01-01

Although children and infants are likely to be victims in a disaster and are more vulnerable in a disaster than adults, disaster planning and management has often overlooked the specific needs of pediatric patients. We discuss key components of disaster planning and management for pediatric patients including emergency medical services, hospital/facility issues, evacuation centers, family separation/reunification, children with special healthcare needs, mental health issues, and overcrowding/surge capacity. Specific policy recommendations and an appendix with detailed practical information and algorithms are included. The first part of this three part series on pediatric issues in disaster management addresses the emergency medical system from the field to the hospital and surge capacity including the impact of crowding. The second part addresses the appropriate set up and functioning of evacuation centers and family separation and reunification. The third part deals with special patient populations: the special healthcare needs patient and mental health issues.

A source-controlled data center network model.

Science.gov (United States)

Yu, Yang; Liang, Mangui; Wang, Zhe

2017-01-01

The construction of data center network by applying SDN technology has become a hot research topic. The SDN architecture has innovatively separated the control plane from the data plane which makes the network more software-oriented and agile. Moreover, it provides virtual multi-tenancy, effective scheduling resources and centralized control strategies to meet the demand for cloud computing data center. However, the explosion of network information is facing severe challenges for SDN controller. The flow storage and lookup mechanisms based on TCAM device have led to the restriction of scalability, high cost and energy consumption. In view of this, a source-controlled data center network (SCDCN) model is proposed herein. The SCDCN model applies a new type of source routing address named the vector address (VA) as the packet-switching label. The VA completely defines the communication path and the data forwarding process can be finished solely relying on VA. There are four advantages in the SCDCN architecture. 1) The model adopts hierarchical multi-controllers and abstracts large-scale data center network into some small network domains that has solved the restriction for the processing ability of single controller and reduced the computational complexity. 2) Vector switches (VS) developed in the core network no longer apply TCAM for table storage and lookup that has significantly cut down the cost and complexity for switches. Meanwhile, the problem of scalability can be solved effectively. 3) The SCDCN model simplifies the establishment process for new flows and there is no need to download flow tables to VS. The amount of control signaling consumed when establishing new flows can be significantly decreased. 4) We design the VS on the NetFPGA platform. The statistical results show that the hardware resource consumption in a VS is about 27% of that in an OFS.

A source-controlled data center network model

Science.gov (United States)

Yu, Yang; Liang, Mangui; Wang, Zhe

2017-01-01

The construction of data center network by applying SDN technology has become a hot research topic. The SDN architecture has innovatively separated the control plane from the data plane which makes the network more software-oriented and agile. Moreover, it provides virtual multi-tenancy, effective scheduling resources and centralized control strategies to meet the demand for cloud computing data center. However, the explosion of network information is facing severe challenges for SDN controller. The flow storage and lookup mechanisms based on TCAM device have led to the restriction of scalability, high cost and energy consumption. In view of this, a source-controlled data center network (SCDCN) model is proposed herein. The SCDCN model applies a new type of source routing address named the vector address (VA) as the packet-switching label. The VA completely defines the communication path and the data forwarding process can be finished solely relying on VA. There are four advantages in the SCDCN architecture. 1) The model adopts hierarchical multi-controllers and abstracts large-scale data center network into some small network domains that has solved the restriction for the processing ability of single controller and reduced the computational complexity. 2) Vector switches (VS) developed in the core network no longer apply TCAM for table storage and lookup that has significantly cut down the cost and complexity for switches. Meanwhile, the problem of scalability can be solved effectively. 3) The SCDCN model simplifies the establishment process for new flows and there is no need to download flow tables to VS. The amount of control signaling consumed when establishing new flows can be significantly decreased. 4) We design the VS on the NetFPGA platform. The statistical results show that the hardware resource consumption in a VS is about 27% of that in an OFS. PMID:28328925

Poison control center - emergency number

Science.gov (United States)

For a POISON EMERGENCY call: 1-800-222-1222 ANYWHERE IN THE UNITED STATES This national hotline number will let you ... is a free and confidential service. All local poison control centers in the United States use this ...

Centers for Disease Control and Prevention

Science.gov (United States)

... PDF file Microsoft PowerPoint file Microsoft Word file Microsoft Excel ... Centers for Disease Control and Prevention Page maintained by: Office of Associate Director of Communication, Division of Public ...

A control center design revisited: learning from users’ appropriation

DEFF Research Database (Denmark)

Souza da Conceição, Carolina; Cordeiro, Cláudia

2014-01-01

This paper aims to present the lessons learned during a control center design project by revisiting another control center from the same company designed two and a half years before by the same project team. In light of the experience with the first project and its analysis, the designers and res...

The ORNL Controlled Fusion Atomic Data Center

International Nuclear Information System (INIS)

Schultz, D.R.; Krstic, P.S.; Ownby, F.M.; Meyer, F.W.; Havener, C.C.; Bannister, M.E.; Liu, W.; Jeffery, D.J.; Stancil, P.C.

1997-01-01

The principal mission of the Controlled Fusion Atomic Data Center is the collection evaluation, and dissemination of atomic collision data relevant to fusion energy development. With the advent of the widespread use of the World Wide Web, the data center's resources are being placed on-line to facilitate their use by end-users (cf. http://www-cfadc.phy.ornl.gov/). As this development continues, initially disparate, individually compiled resources will be transformed into integrated tools for retrieving recommended data, or displaying and manipulating the information available. The data center's present capabilities, recent data production/evaluation efforts, and goals for future development are highlighted here

Poison control center - Emergency number (image)

Science.gov (United States)

For a poison emergency call 1-800-222-1222 anywhere in the United States. This national hotline number will let you ... is a free and confidential service. All local poison control centers in the U.S. use this national ...

The ORNL Controlled Fusion Atomic Data Center: Overview of Activities 2011

International Nuclear Information System (INIS)

Schultz, D.R.

2011-01-01

The Controlled Fusion Atomic Data Center (CFADC) of the Oak Ridge National Laboratory continued operation aimed at collecting, evaluating, and disseminating atomic, molecular, and particle-surface interaction (AM and PSI) data needed by both the U.S. and international plasma science communities. This work has been carried out within an overarching atomic physics research group which produces much of the required data through an active experimental and theoretical science program. The production of an annotated bibliography of AM and PSI literature relevant to plasma science continues to be among the most important activities of the data center, forming the basis for the CFADC on-line bibliographic search engine and a significant part of the IAEA A+M Data Unit's 'International Bulletin on Atomic and Molecular Data for Fusion.' Also chief among the data center's activities are responses to specific data requests from the plasma science community, leading to either rapid feedback using existing data resources or long term data production projects, as well as participation in IAEA Coordinated Research Programs including recently 'Data for Surface Composition Dynamics Relevant to Erosion Processes' and 'Atomic and Molecular Data for Plasma Modeling.' Highlights of recent data production projects include the following: Experimental and theoretical data for inelastic electron-hydrocarbon reactions, large scale computational results for particle reflection from surfaces, measurements of chemical sputtering from carbon, inaugural experiments considering molecular ion collisions with neutral hydrogen, and expansion of the database of elastic and related transport cross sections calculated for intrinsic and extrinsic impurities in hydrogen plasmas. Progress is being hampered owing to news from the US Department of Energy that it plans to close out the program after a ramp down of funding in 2012, following a distinguished 52 year history of contributions to the US and

Learning System Center App Controller

CERN Document Server

Naeem, Nasir

2015-01-01

This book is intended for IT professionals working with Hyper-V, Azure cloud, VMM, and private cloud technologies who are looking for a quick way to get up and running with System Center 2012 R2 App Controller. To get the most out of this book, you should be familiar with Microsoft Hyper-V technology. Knowledge of Virtual Machine Manager is helpful but not mandatory.

The role of poison control centers in CBRN incidents

International Nuclear Information System (INIS)

Borron, S. W.; Haynes, J.; Young, P.

2009-01-01

Poison Control Centers (PCCs) have historically played a limited, parallel role in management of CBRN incidents; they are frequently called for advice by the public or health care providers when such incidents occur, but in many cases are not considered an integral part of the CBRN disaster emergency response team, lacking a 'place' in the Incident Command Structure (ICS). This is unfortunate, as PCCs represent an important public health resource. The roughly 60 centers in the U.S. are available 24/7, 365 days/year. Telephones are manned by professionals, including pharmacists and nurses with additional specialized training in poisoning response. PCC medical directors are generally trained in Emergency Medicine, Pediatrics or Preventive Medicine, with subspecialty training in Medical Toxicology. Many toxicologists attend specialized training in the radiation emergency management at REAC/TS. PCCs have extensive databases for poisoning management coupled with GIS surveillance. This combination of expertise and information renders PCCs well prepared to advice on decontamination and treatment of CBRN-contaminated victims. Their toxicology expertise allows their participation in risk assessment. PCCs are highly trusted by the community, enhancing their role in risk communication. We recently initiated a program that provides guidance on activation of PCCs by the Region 6 Regional Response Team (RRT6), Co-Chaired by the US Environmental Protection Agency (EPA) and the US Coast Guard, serving as the federal component of the National Response System for the states of Arkansas, Louisiana, New Mexico, Oklahoma, and Texas. The program will be described, with emphasis on how PCCs may work within ICS.(author)

FFTF Work Control Center

International Nuclear Information System (INIS)

Talbot, M.D.

1986-01-01

A centralized Work Control Center (WCC) is responsible for assuring that maintenance and modification of the Fast Flux Test Facility (FFTF) is performed in accordance with written procedures that ensure design integrity, personnel and public safety, and equipment and system availability for the computerized Master Information Data Acquisition System (MIDAS). Each maintenance task is logged into MIDAS from a Work Request from that has been reviewed and prioritized by the WCC. Thereafter, MIDAS is used to track schedule, manpower and material requirements; authorize field work; and close out the maintenance activity

Systems engineering and integration of control centers in support of multiple programs. [ground control for STS payloads and unmanned vehicles

Science.gov (United States)

Miller, David N.

1989-01-01

The NASA Johnson Space Center's new Multiprogram Control Center (MPCC) addresses the control requirements of complex STS payloads as well as unmanned vehicles. An account is given of the relationship of the MPCC to the STS Mission Control Center, with a view to significant difficulties that may be encountered and solutions thus far devised for generic problems. Examples of MPCC workstation applications encompass telemetry decommutation, engineering unit conversion, data-base management, trajectory processing, and flight design.

American Association of Poison Control Centers

Science.gov (United States)

... add poison control as a contact in your smartphone. Take the pledge! National Poison Prevention Week is March 19-25! Be a part of the conversation by following #PreventPoison and #NPPW2017 on social media, and check out AAPCC's NPPW webpage and press ...

Connecting inventory control and repair shop control : a differentiated control structure for repairable spare parts

NARCIS (Netherlands)

Driessen, M.A.; Rustenburg, W.D.; Houtum, van G.J.J.A.N.; Wiers, V.C.S.

2014-01-01

This paper presents a control structure for integrating decisions on spare parts inventory control and the control of repair shops for maintenance spare parts. A dierentiated control structure is proposed for the various repair shop types recognized in practice. Decisions functions are mapped and

Xingo`s control center; Centro de controle de Xingo

Energy Technology Data Exchange (ETDEWEB)

Parente, Benedito; Souza, Antonio; Ferraz, Adelson; Florentino, Luiz; Costa, Carlos [Companhia Hidroeletrica do Sao Francisco (CHESF), Recife, PE (Brazil)

1995-12-31

This work describes the development activities of the Xingo`s Control Center, since its production until its commissioning. It emphasizes the applicative programs developed by the CHESF`s, an electric power utility of Brazil (Northeast and Southeast of Brazil, team together with the furnisher`s team. The results of factory and field tests are commented 7 refs.

Intelligent control of HVAC systems. Part II: perceptron performance analysis

Directory of Open Access Journals (Sweden)

Ioan URSU

2013-09-01

Full Text Available This is the second part of a paper on intelligent type control of Heating, Ventilating, and Air-Conditioning (HVAC systems. The whole study proposes a unified approach in the design of intelligent control for such systems, to ensure high energy efficiency and air quality improving. In the first part of the study it is considered as benchmark system a single thermal space HVAC system, for which it is assigned a mathematical model of the controlled system and a mathematical model(algorithm of intelligent control synthesis. The conception of the intelligent control is of switching type, between a simple neural network, a perceptron, which aims to decrease (optimize a cost index,and a fuzzy logic component, having supervisory antisaturating role for neuro-control. Based on numerical simulations, this Part II focuses on the analysis of system operation in the presence only ofthe neural control component. Working of the entire neuro-fuzzy system will be reported in a third part of the study.

Complete Quantum Control of a Single Silicon-Vacancy Center in a Diamond Nanopillar

Science.gov (United States)

Zhang, Jingyuan Linda; Lagoudakis, Konstantinos G.; Tzeng, Yan-Kai; Dory, Constantin; Radulaski, Marina; Kelaita, Yousif; Shen, Zhi-Xun; Melosh, Nicholas A.; Chu, Steven; Vuckovic, Jelena

Coherent quantum control of a quantum bit (qubit) is an important step towards its use in a quantum network. SiV- center in diamond offers excellent physical qualities such as low inhomogeneous broadening, fast photon emission, and a large Debye-Waller factor, while the fast spin manipulation and techniques to extend the spin coherence time are under active investigation. Here, we demonstrate full coherent control over the state of a single SiV- center in a diamond nanopillar using ultrafast optical pulses. The high quality of the chemical vapor deposition grown SiV- centers allows us to coherently manipulate and quasi-resonantly read out the state of the single SiV- center. Moreover, the SiV- centers being coherently controlled are integrated into diamond nanopillar arrays in a site-controlled, individually addressable manner with high yield, low strain, and high spectral stability, which paves the way for scalable on chip optically accessible quantum system in a quantum photonic network. Financial support is provided by the DOE Office of Basic Energy Sciences, Division of Materials Sciences through Stanford Institute for Materials and Energy Sciences (SIMES) under contract DE-AC02-76SF00515.

75 FR 30409 - Centers for Disease Control and Prevention

Science.gov (United States)

2010-06-01

... applications received in response to ``Workplace Health Research Network (WHRN)--Coordinating Center, SIP 10-031 and WHRN--Collaborating Centers, SIP 10-032, initial review.'' Contact Person for More Information..., Disability, and Injury Prevention and Control Special Interest Projects (SIPs): Workplace Health Research...

Quality control of injection moulded micro mechanical parts

DEFF Research Database (Denmark)

Gasparin, Stefania; Tosello, Guido; Hansen, Hans Nørgaard

2009-01-01

Quality control of micro components is an increasing challenge. Smaller mechanical parts are characterized by smaller tolerance to be verified. This paper focuses on the dimensional verification of micro injection moulded components selected from an industrial application. These parts are measured...... using an Optical Coordinate Measuring Machine (OCMM), which guarantees fast surface scans suitable for in line quality control. The uncertainty assessment of the measurements is calculated following the substitution method. To investigate the influence parameters in optical coordinate metrology two...

Aging Management Guideline for commercial nuclear power plants: Motor control centers

International Nuclear Information System (INIS)

Toman, G.; Gazdzinski, R.; O'Hearn, E.

1994-02-01

This Aging Management Guideline (AMG) provides recommended methods for effective detection and mitigation of age-related degradation mechanisms in Boiling Water Reactor (BWR) and Pressurized Water Reactor (PWR) commercial nuclear power plant motor control centers important to license renewal. The intent of this AMG is to assist plant maintenance and operations personnel in maximizing the safe, useful life of these components. It also supports the documentation of effective aging management programs required under the License Renewal Rule 10 CFR Part 54. This AMG is presented in a manner that allows personnel responsible for performance analysis and maintenance to compare their plant-specific aging mechanisms (expected or already experienced) and aging management program activities to the more generic results and recommendations presented herein

A minimum attention control center for nuclear power plants

International Nuclear Information System (INIS)

Meijer, C.H.

1986-01-01

Control Centers for Nuclear Power Plants have characteristically been designed for maximum attention by the operating staffs of these plants. Consequently, the monitoring, control and diagnostics oriented cognitive activities by these staffs, were mostly ''data-driven'' in nature. This paper addresses a control center concept, under development by Combustion Engineering, that promotes a more ''information-driven'' cognitive interaction process between the operator and the plant. The more ''intelligent'' and therefore less attentive nature of such interactive process utilizes computer implemented cognitive engineered algorithms. The underlying structure of these algorithms is based upon the Critical Function/Success Path monitoring principle. The paper highlights a typical implementation of the minimum attention concept for the handling of unfamiliar safety related events. (author)

Intelligent control of HVAC systems. Part I: Modeling and synthesis

Directory of Open Access Journals (Sweden)

Adrian TOADER

2013-03-01

Full Text Available This is the first part of a work on intelligent type control of Heating, Ventilating and Air-Conditioning (HVAC systems. The study is performed from the perspective of giving a unitary control method to ensure high energy efficiency and air quality improving. To illustrate the proposed HVAC control technique, in this first part it is considered as benchmark problem a single thermal space HVAC system. The construction of the mathematical model is performed only with a view to obtain a framework of HVAC intelligent control validation by numerical simulations. The latter will be reported in a second part of the study.

Inventory Control of Spare Parts for Operating Nuclear Power plants

Energy Technology Data Exchange (ETDEWEB)

Park, Jong-Hyuck; Jang, Se-Jin; Hwang, Eui-Youp; Yoo, Sung-Soo; Yoo, Keun-Bae; Lee, Sang-Guk; Hong, Sung-Yull [Korea Electric Power Research Institute, Taejon (Korea, Republic of)

2006-07-01

Inventory control of spare parts plays an increasingly important role in operation management. The trade-off is clear: on one hand a large number of spare parts ties up a large amount of capital, while on the other hand too little inventory may result in extremely costly emergency actions. This is why during the last few decades inventory of spare parts control has been the topics of many publications. Recently management systems such as manufacturing resources planning (MRP) and enterprise resource planning (ERP) have been added. However, most of these contributions have similar theoretical background. This means the concepts and techniques are mainly based on mathematical assumptions and modeling inventory of spare parts situations Nuclear utilities in Korea have several problems to manage the optimum level of spare parts though they used MRP System. Because most of items have long lead time and they are imported from United States, Canada, France and so on. In this paper, we will examine the available inventory optimization models which are applicable to nuclear power plant and then select optimum model and assumptions to make inventory of spare parts strategies. Then we develop the computer program to select and determine optimum level of spare parts which should be automatically controlled by KHNP ERP system. The main contribution of this paper is an inventory of spare parts control model development, which can be applied to nuclear power plants in Korea.

Inventory Control of Spare Parts for Operating Nuclear Power plants

International Nuclear Information System (INIS)

Park, Jong-Hyuck; Jang, Se-Jin; Hwang, Eui-Youp; Yoo, Sung-Soo; Yoo, Keun-Bae; Lee, Sang-Guk; Hong, Sung-Yull

2006-01-01

Inventory control of spare parts plays an increasingly important role in operation management. The trade-off is clear: on one hand a large number of spare parts ties up a large amount of capital, while on the other hand too little inventory may result in extremely costly emergency actions. This is why during the last few decades inventory of spare parts control has been the topics of many publications. Recently management systems such as manufacturing resources planning (MRP) and enterprise resource planning (ERP) have been added. However, most of these contributions have similar theoretical background. This means the concepts and techniques are mainly based on mathematical assumptions and modeling inventory of spare parts situations Nuclear utilities in Korea have several problems to manage the optimum level of spare parts though they used MRP System. Because most of items have long lead time and they are imported from United States, Canada, France and so on. In this paper, we will examine the available inventory optimization models which are applicable to nuclear power plant and then select optimum model and assumptions to make inventory of spare parts strategies. Then we develop the computer program to select and determine optimum level of spare parts which should be automatically controlled by KHNP ERP system. The main contribution of this paper is an inventory of spare parts control model development, which can be applied to nuclear power plants in Korea

Future applications of artificial intelligence to Mission Control Centers

Science.gov (United States)

Friedland, Peter

1991-01-01

Future applications of artificial intelligence to Mission Control Centers are presented in the form of the viewgraphs. The following subject areas are covered: basic objectives of the NASA-wide AI program; inhouse research program; constraint-based scheduling; learning and performance improvement for scheduling; GEMPLAN multi-agent planner; planning, scheduling, and control; Bayesian learning; efficient learning algorithms; ICARUS (an integrated architecture for learning); design knowledge acquisition and retention; computer-integrated documentation; and some speculation on future applications.

Online social networking and US poison control centers: Facebook as a means of information distribution.

Science.gov (United States)

Vo, Kathy; Smollin, Craig

2015-06-01

Online social networking services such as Facebook provide a novel medium for the dissemination of public health information by poison control centers in the United States. We performed a cross-sectional study of poison control center Facebook pages to describe and assess the use of this medium. Facebook pages associated with poison control centers were identified during a continuous two-week period from December 24, 2012 to January 7, 2013. Data were extracted from each page, including affiliated poison control center; page duration, measured in years since registration; number of subscribers; number of postings by general toxicological category; and measures of user-generated activity including "likes", "shares", and comments per posting. Among the 56 US poison control centers, 39 Facebook pages were identified, of which 29 were currently active. The total number of active pages has increased by 140% from 2009 to 2013 (average of 25% per year). The total number of all subscribers to active pages was 11,211, ranging from 40 to 2,456 (mean 387, SD 523), equal to 0.006% of all Facebook users in the United States. The number of subscribers per page was associated with page duration, number of postings, and type of postings. The types of toxicological postings were public education (45%), self-promotion (28%), childhood safety (12%), drugs of abuse (8%), environmental poisonings (6%), and general overdoses (1%). Slightly over half of all poison control centers in the United States are supplementing their outreach and education efforts through Facebook. In general, the more active the poison control center on Facebook, the more page followers and follower engagement gained.

Mosquito Control: Do Your Part

Centers for Disease Control (CDC) Podcasts

Everyone can do their part to help control mosquitoes that can carry viruses like West Nile, Zika, dengue and chikungunya. In each episode of this podcast, you will learn ways to help reduce the number of mosquitoes in and around your home.

Contradictions of Control, Part 1: Administrators and Teachers.

Science.gov (United States)

McNeil, Linda M.

1988-01-01

Bureaucratic controls are at war with educational goals in our school system. This disharmony drastically affects the teacher/student relationship. The first in a three-part series, this article summarizes complex ethnographic data from the report "Contradictions of Control: School Structure and School Knowledge." Includes 6 references. (MD)

Glycemic control, compliance, and satisfaction for diabetic gravidas in centering group care.

Science.gov (United States)

Parikh, Laura I; Jelin, Angie C; Iqbal, Sara N; Belna, Sarah L; Fries, Melissa H; Patel, Misbah; Desale, Sameer; Ramsey, Patrick S

2017-05-01

To determine if diabetic gravidas enrolled in Centering® group care have improved glycemic control compared to those attending standard prenatal care. To compare compliance and patient satisfaction between the groups. We conducted a prospective cohort study of diabetics enrolled in centering group care from October 2013 to December 2015. Glycemic control, compliance and patient satisfaction (five-point Likert scale) were evaluated. Student's t-test, Chi-Square and mixed effects model were used to compare outcomes. We compared 20 patients in centering to 28 standard prenatal care controls. Mean fasting blood sugar was lower with centering group care (91.0 versus 105.5 mg/dL, p =0.017). There was no difference in change in fasting blood sugar over time between the two groups (p = 0.458). The percentage of time patients brought their blood glucose logs did not differ between the centering group and standard prenatal care (70.7 versus 73.9%, p = 0.973). Women in centering group care had better patient satisfaction scores for "ability to be seen by a physician" (5 versus 4, p = 0.041) and "time in waiting room" (5 versus 4, p =0.001). Fasting blood sugar was lower for patients in centering group care. Change in blood sugar over time did not differ between groups. Diabetic gravidas enrolled in centering group care report improved patient satisfaction.

77 FR 72868 - The Centers for Disease Control (CDC)/Health Resources and Services Administration (HRSA...

Science.gov (United States)

2012-12-06

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention The Centers for Disease Control (CDC)/Health Resources and Services Administration (HRSA) Advisory Committee on HIV, Viral... announcements of meetings and other committee management activities, for both the Centers for Disease Control...

77 FR 58847 - Board of Scientific Counselors, National Center for Injury Prevention and Control (BSC, NCIPC)

Science.gov (United States)

2012-09-24

... the causes, diagnosis, treatment, control, and prevention of physical and mental diseases, and other... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of Scientific Counselors, National Center for Injury Prevention and Control (BSC, NCIPC) In accordance with...

78 FR 29754 - Board of Scientific Counselors, National Center for Injury Prevention and Control, (BSC, NCIPC)

Science.gov (United States)

2013-05-21

... relating to the causes, diagnosis, treatment, control, and prevention of physical and mental diseases, and... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of Scientific Counselors, National Center for Injury Prevention and Control, (BSC, NCIPC) In accordance with...

Aircraft Turbine Engine Control Research at NASA Glenn Research Center

Science.gov (United States)

Garg, Sanjay

2014-01-01

This lecture will provide an overview of the aircraft turbine engine control research at NASA (National Aeronautics and Space Administration) Glenn Research Center (GRC). A brief introduction to the engine control problem is first provided with a description of the current state-of-the-art control law structure. A historical aspect of engine control development since the 1940s is then provided with a special emphasis on the contributions of GRC. The traditional engine control problem has been to provide a means to safely transition the engine from one steady-state operating point to another based on the pilot throttle inputs. With the increased emphasis on aircraft safety, enhanced performance and affordability, and the need to reduce the environmental impact of aircraft, there are many new challenges being faced by the designers of aircraft propulsion systems. The Controls and Dynamics Branch (CDB) at GRC is leading and participating in various projects in partnership with other organizations within GRC and across NASA, other government agencies, the U.S. aerospace industry, and academia to develop advanced propulsion controls and diagnostics technologies that will help meet the challenging goals of NASA programs under the Aeronautics Research Mission. The second part of the lecture provides an overview of the various CDB technology development activities in aircraft engine control and diagnostics, both current and some accomplished in the recent past. The motivation for each of the research efforts, the research approach, technical challenges and the key progress to date are summarized. The technologies to be discussed include system level engine control concepts, gas path diagnostics, active component control, and distributed engine control architecture. The lecture will end with a futuristic perspective of how the various current technology developments will lead to an Intelligent and Autonomous Propulsion System requiring none to very minimum pilot interface

MOD control center automated information systems security evolution

Science.gov (United States)

Owen, Rich

1991-01-01

The role of the technology infusion process in future Control Center Automated Information Systems (AIS) is highlighted. The following subject areas are presented in the form of the viewgraphs: goals, background, threat, MOD's AISS program, TQM, SDLC integration, payback, future challenges, and bottom line.

Optical and microwave control of germanium-vacancy center spins in diamond

Science.gov (United States)

Siyushev, Petr; Metsch, Mathias H.; Ijaz, Aroosa; Binder, Jan M.; Bhaskar, Mihir K.; Sukachev, Denis D.; Sipahigil, Alp; Evans, Ruffin E.; Nguyen, Christian T.; Lukin, Mikhail D.; Hemmer, Philip R.; Palyanov, Yuri N.; Kupriyanov, Igor N.; Borzdov, Yuri M.; Rogers, Lachlan J.; Jelezko, Fedor

2017-08-01

A solid-state system combining a stable spin degree of freedom with an efficient optical interface is highly desirable as an element for integrated quantum-optical and quantum-information systems. We demonstrate a bright color center in diamond with excellent optical properties and controllable electronic spin states. Specifically, we carry out detailed optical spectroscopy of a germanium-vacancy (GeV ) color center demonstrating optical spectral stability. Using an external magnetic field to lift the electronic spin degeneracy, we explore the spin degree of freedom as a controllable qubit. Spin polarization is achieved using optical pumping, and a spin relaxation time in excess of 20 μ s is demonstrated. We report resonant microwave control of spin transitions, and use this as a probe to measure the Autler-Townes effect in a microwave-optical double-resonance experiment. Superposition spin states were prepared using coherent population trapping, and a pure dephasing time of about 19 ns was observed at a temperature of 2.0 K.

Iowa Water Center | Iowa Water Center

Science.gov (United States)

Home Iowa State University Extension Iowa Water Center Submitted by mollyd on April 24, 2012 - 09 :42 Advancing the state of water knowledge and management The Iowa Water Center is a part of a nationwide network of university-based water centers created to encourage interdisciplinary water research

Building an outpatient imaging center: A case study at genesis healthcare system, part 2.

Science.gov (United States)

Yanci, Jim

2006-01-01

In the second of 2 parts, this article will focus on process improvement projects utilizing a case study at Genesis HealthCare System located in Zanesville, OH. Operational efficiency is a key step in developing a freestanding diagnostic imaging center. The process improvement projects began with an Expert Improvement Session (EIS) on the scheduling process. An EIS session is a facilitated meeting that can last anywhere from 3 hours to 2 days. Its intention is to take a group of people involved with the problem or operational process and work to understand current failures or breakdowns in the process. Recommendations are jointly developed to overcome any current deficiencies, and a work plan is structured to create ownership over the changes. A total of 11 EIS sessions occurred over the course of this project, covering 5 sections: Scheduling/telephone call process, Pre-registration, Verification/pre-certification, MRI throughput, CT throughput. Following is a single example of a project focused on the process improvement efforts. All of the process improvement projects utilized a quasi methodology of "DMAIC" (Define, Measure, Analyze, Improve, and Control).

75 FR 78997 - Centers for Disease Control and Prevention/Health Resources and Services Administration (CDC/HRSA...

Science.gov (United States)

2010-12-17

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Centers for Disease Control and Prevention/Health Resources and Services Administration (CDC/HRSA) Advisory Committee... and other committee management activities, for both the Centers for Disease Control and Prevention and...

Size-controlled fluorescent nanodiamonds: A facile method of fabrication and color-center counting

KAUST Repository

Mahfouz, Remi

2013-01-01

We present a facile method for the production of fluorescent diamond nanocrystals (DNCs) of different sizes and efficiently quantify the concentration of emitting defect color centers (DCCs) of each DNC size. We prepared the DNCs by ball-milling commercially available micrometer-sized synthetic (high pressure, high temperature (HPHT)) diamonds and then separated the as-produced DNCs by density gradient ultracentrifugation (DGU) into size-controlled fractions. A protocol to enhance the uniformity of the nitrogen-vacancy (NV) centers in the diamonds was devised by depositing the DNCs as a dense monolayer on amino-silanized silicon substrates and then subjecting the monolayer to He+ beam irradiation. Using a standard confocal setup, we analyzed the average number of NV centers per crystal, and obtained a quantitative relationship between the DNC particle size and the NV number per crystal. This relationship was in good agreement with results from previous studies that used more elaborate setups. Our findings suggest that nanocrystal size separation by DGU may be used to control the number of defects per nanocrystal. The efficient approaches described herein to control and quantify DCCs are valuable to researchers as they explore applications for color centers and new strategies to create them. © 2013 The Royal Society of Chemistry.

The Air Force Center for Optimal Design and Control

National Research Council Canada - National Science Library

Burns, John

1997-01-01

This report contains a summary and highlights of the research funded by the Air Force under AFOSR URI Grant F49620-93-1-0280, titled 'Center for Optimal Design and Control of Distributed Parameter Systems' (CODAC...

Oral health in Brazil - Part II: Dental Specialty Centers (CEOs

Directory of Open Access Journals (Sweden)

Vinícius Pedrazzi

2008-08-01

Full Text Available The concepts of health promotion, self-care and community participation emerged during the 1970s and, since then, their application has grown rapidly in the developed world, showing evidence of effectiveness. In spite of this, a major part of the population in the developing countries still has no access to specialized dental care such as endodontic treatment, dental care for patients with special needs, minor oral surgery, periodontal treatment and oral diagnosis. This review focuses on a program of the Brazilian Federal Government named CEOs (Dental Specialty Centers, which is an attempt to solve the dental care deficit of a population that is suffering from oral diseases and whose oral health care needs have not been addressed by the regular programs offered by the SUS (Unified National Health System. Literature published from 2000 to the present day, using electronic searches by Medline, Scielo, Google and hand-searching was considered. The descriptors used were Brazil, Oral health, Health policy, Health programs, and Dental Specialty Centers. There are currently 640 CEOs in Brazil, distributed in 545 municipal districts, carrying out dental procedures with major complexity. Based on this data, it was possible to conclude that public actions on oral health must involve both preventive and curative procedures aiming to minimize the oral health distortions still prevailing in developing countries like Brazil.

Controlled coupling of NV defect centers to plasmonic and photonic nanostructures

Energy Technology Data Exchange (ETDEWEB)

Barth, Michael, E-mail: michael.barth@physik.hu-berlin.d [Institute of Physics, Humboldt-Universitaet zu Berlin, Hausvogteiplatz 5-7, D-10117 Berlin (Germany); Schietinger, Stefan; Schroeder, Tim; Aichele, Thomas; Benson, Oliver [Institute of Physics, Humboldt-Universitaet zu Berlin, Hausvogteiplatz 5-7, D-10117 Berlin (Germany)

2010-09-15

Nitrogen-vacancy (NV) defect centers in diamond have recently emerged as promising candidates for a number of applications in the fields of quantum optics and quantum information, such as single photon generation and spin qubit operations. The performance of these defect centers can strongly be enhanced through coupling to plasmonic and photonic nanostructures, such as metal particles and optical microcavities. Here, we demonstrate the controlled assembly of such hybrid structures via manipulation with scanning near-field probes. In particular, we investigate the plasmonic enhancement of the single photon emission through coupling to gold nanospheres as well as the coupling of diamond nanocrystals to the optical modes of microsphere resonators and photonic crystal cavities. These systems represent prototypes of fundamental nanophotonic/plasmonic elements and provide control on the generation and coherent transfer of photons on the level of a single quantum emitter.

Use of the Human Centered Design concept when designing ergonomic NPP control rooms

International Nuclear Information System (INIS)

Skrehot, Petr A.; Houser, Frantisek; Riha, Radek; Tuma, Zdenek

2015-01-01

Human-Centered Design is a concept aimed at reconciling human needs on the one hand and limitations posed by the design disposition of the room being designed on the other hand. This paper describes the main aspects of application of the Human-Centered Design concept to the design of nuclear power plant control rooms. (orig.)

CAMMESA control center controllers qualification; Habilitacion de operadores del centro de control de CAMMESA

Energy Technology Data Exchange (ETDEWEB)

Kaller, Daniel J [CAMMESA, Compania Administradora del Mercado Mayorista Electrico S.A., Buenos Aires (Argentina)

2001-07-01

The safety and quality of the Interconnection Argentine System (IAS) operation, basically depend on the personnel performance in the CAMMESA Operation Control Center (COC), which is the IAS maximum operative hierarchy, and whose mission is to coordinate the IAS and the dispatch of the AWEM (Argentine Wholesale Electric Market) in real time. With the goal of improving the COC controllers' qualification in order to prevent critical situations and to solve the emergences based on an efficient way, in 1999 the process of 'Habilitation of OCC Controllers' was accomplished according to the resolution number 208/98 from the Energy General Office. This technical contribution describes the executed stages and the acquired experiences when applying the mentioned procedure indicating the main found difficulties, reached results and obtained benefits.

Energy Center Structure Optimization by using Smart Technologies in Process Control System

Science.gov (United States)

Shilkina, Svetlana V.

2018-03-01

The article deals with practical application of fuzzy logic methods in process control systems. A control object - agroindustrial greenhouse complex, which includes its own energy center - is considered. The paper analyzes object power supply options taking into account connection to external power grids and/or installation of own power generating equipment with various layouts. The main problem of a greenhouse facility basic process is extremely uneven power consumption, which forces to purchase redundant generating equipment idling most of the time, which quite negatively affects project profitability. Energy center structure optimization is largely based on solving the object process control system construction issue. To cut investor’s costs it was proposed to optimize power consumption by building an energy-saving production control system based on a fuzzy logic controller. The developed algorithm of automated process control system functioning ensured more even electric and thermal energy consumption, allowed to propose construction of the object energy center with a smaller number of units due to their more even utilization. As a result, it is shown how practical use of microclimate parameters fuzzy control system during object functioning leads to optimization of agroindustrial complex energy facility structure, which contributes to a significant reduction in object construction and operation costs.

Dimensional control and check of field machining parts for reactor internals installation

International Nuclear Information System (INIS)

Zhang Caifang

2010-01-01

Some key issues of dimensional control for reactor internals installation are analyzed, and important technical requirements of crucial quality control elements on the measurement, machining, and checking of reactor internals filed machining parts are discussed. Moreover, provisions on quality control and risk prevention of reactor internals filed machining parts are presented in this paper. (author)

75 FR 7483 - Advisory Committee to the Director (ACD), Centers for Disease Control (CDC) and Prevention-Ethics...

Science.gov (United States)

2010-02-19

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Advisory Committee to the Director (ACD), Centers for Disease Control (CDC) and Prevention--Ethics Subcommittee (ES); Correction AGENCY: Centers for Disease Control and Prevention (CDC), HHS. ACTION: Notice of meeting; meeting...

Voice Over Internet Protocol (VoIP) in a Control Center Environment

Science.gov (United States)

Pirani, Joseph; Calvelage, Steven

2010-01-01

The technology of transmitting voice over data networks has been available for over 10 years. Mass market VoIP services for consumers to make and receive standard telephone calls over broadband Internet networks have grown in the last 5 years. While operational costs are less with VoIP implementations as opposed to time division multiplexing (TDM) based voice switches, is it still advantageous to convert a mission control center s voice system to this newer technology? Marshall Space Flight Center (MSFC) Huntsville Operations Support Center (HOSC) has converted its mission voice services to a commercial product that utilizes VoIP technology. Results from this testing, design, and installation have shown unique considerations that must be addressed before user operations. There are many factors to consider for a control center voice design. Technology advantages and disadvantages were investigated as they refer to cost. There were integration concerns which could lead to complex failure scenarios but simpler integration for the mission infrastructure. MSFC HOSC will benefit from this voice conversion with less product replacement cost, less operations cost and a more integrated mission services environment.

Numerical analysis of thermal environment control in high density data center

Energy Technology Data Exchange (ETDEWEB)

Kwon, Oh Kyung; Kim, Hyeon Joong; Cha, Dong An [Korea Institute of Industrial Technology, Cheonan (Korea, Republic of)

2012-08-15

Increasing heat generation in CPUs can hamper effective recirculation and by pass because of the large temperature difference between the exhaust and the intake air through a server room. This increases the overall temperature inside a data center and decreases the efficiency of the data center's cooling system. The purpose of the data center's cooling system is to separate the intake and exhaust air by controlling the computer room air conditioner(CRAC). In this study, ICEPAK is used to conduct a numerical analysis of a data center's cooling system. The temperature distribution and the entire room are analyzed for different volumetric flow rates. The optimized volumetric flow rate is found for each CPU power. The heat removal and temperature distribution for CPU powers of 100, 120, and 140W are found to be the best for a volumetric flow rate of 0.15m'3'/s. The numerical analysis is verified through RTI indicators, and the results appear to be the most reliable when the RTI value is 81.

'Motor control center obsolescence'

International Nuclear Information System (INIS)

Irish, C.S.

2003-01-01

A significant and growing problem within the global nuclear industry is the aging of motor control center (MCC) components. MCC's have a very important role in the safety and critical to generation requirements of a nuclear power plant. Although many OEM's MCC's such as ITE/Telemechanique, GE, Westinghouse, Cutler Hammer, Klockner Moeller, etc. have been used throughout the global nuclear industry, they all have one common aspect obsolescence. Obsolescence of various components within the MCC's such as molded case circuit breakers, starters, relays, heaters, contactors, etc. are impacting the reliability of the MCC to serve its intended function. The paper will discuss the options which the nuclear industry is faced with to increase the reliability of the MCC's while maintaining design control, qualification and meeting budget constraints. The options as listed below shall be discussed in detail with examples to enhance the readers understanding of the situation: 1) Component by component replacement: The hurdles associated with trying to find equivalent components to replace the obsolete components while still worki (mechanically and electrically) in the original cubicle will be presented. 2) Complete MCC cubicle with new internal components replacement: The process of supplying a replacement cubicle, with all new internal components and new door to replace the original cubicle will be discussed. The presentation will conclude with a comparison of the advantages and dis-advantages of the two methods to bring the MCC to an as new condition with the overall goal of increasing reliability. (author)

Application of PLC in the crane control system of MJTR

International Nuclear Information System (INIS)

Li Ziqiang; Ji Xiangdong

2004-01-01

The paper describes the application of PLC (Programmable Controller) in the control system of the bridge crane. PLC is the essential part of the control system, which uses some equipment such as frequency transformer and photoelectric switch to implement remote, manual and automatic centering functions. This paper emphasizes the programming of the automatic hole centering

The psychology of computer displays in the modern mission control center

Science.gov (United States)

Granaas, Michael M.; Rhea, Donald C.

1988-01-01

Work at NASA's Western Aeronautical Test Range (WATR) has demonstrated the need for increased consideration of psychological factors in the design of computer displays for the WATR mission control center. These factors include color perception, memory load, and cognitive processing abilities. A review of relevant work in the human factors psychology area is provided to demonstrate the need for this awareness. The information provided should be relevant in control room settings where computerized displays are being used.

Analysis of intentional drug poisonings using Ohio Poison Control Center Data, 2002-2014.

Science.gov (United States)

Pringle, Kelsey; Caupp, Sarah; Shi, Junxin; Wheeler, Krista K; Spiller, Henry A; Casavant, Marcel J; Xiang, Henry

2017-08-01

Pharmaceutical drug poisonings, especially those that are intentional, are a serious problem for adolescents and young adults. Poison control center data is a viable tool to track intentional drug poisonings in near real-time. To determine intentional drug poisoning rates among adolescents and young adults in Ohio using poison control center data. We analyzed data from 2002 to 2014 obtained by Ohio's three poison control centers. Inclusion variables were calls made to the centers that had appropriate subject age (10-29 years old), subject sex, involved substance (all drug classes), and medical outcome (no effect, minor effect, moderate effect, major effect, and death). Intentional drug poisoning reports were also separated into subgroups to compare suspected suicide reports to misuse and abuse reports. Finally, resident population estimates were used to generate 2014 intentional drug poisoning rates for each county in Ohio. The most common age group for intentional drug poisonings was 18-24. Females reported more suspected suicide drug poisonings while males reported more misuse/abuse drug poisonings. The most reported drug class across all ages was analgesics. Of the 88 counties in Ohio, Hamilton, Williams, Washington, and Guernsey counties had the highest rates of intentional drug poisonings. The high report rate of suspected suicides and analgesic class drugs demonstrates the need for preventative measures for adolescents and young adults in Ohio. Any interventions, along with legislative changes, will need to take place in our local communities.

Personal networks and locus of control in large urban centers of Argentina

Directory of Open Access Journals (Sweden)

Pablo De Grande

2013-12-01

Full Text Available This study analyzes the relationship between locus of control and interpersonal relations structures in Argentina. After a representative sample (n = 1500 of households in seven major urban centers (>200,000 inhabitants, it examines the relationship between the externality of locus of control and different aspects of personal networks of each respondent. The results show that people having more relations experiment lower levels of externality of locus of control. Likewise, lower levels of externality are informed when personal ties outside the neighborhood are available, as well as ties high educational level. In this regard, significant associations are verified between control and personal relations structures.

Model Predictive Control of the Exit Part Temperature for an Austenitization Furnace

Directory of Open Access Journals (Sweden)

Hari S. Ganesh

2016-12-01

Full Text Available Quench hardening is the process of strengthening and hardening ferrous metals and alloys by heating the material to a specific temperature to form austenite (austenitization, followed by rapid cooling (quenching in water, brine or oil to introduce a hardened phase called martensite. The material is then often tempered to increase toughness, as it may decrease from the quench hardening process. The austenitization process is highly energy-intensive and many of the industrial austenitization furnaces were built and equipped prior to the advent of advanced control strategies and thus use large, sub-optimal amounts of energy. The model computes the energy usage of the furnace and the part temperature profile as a function of time and position within the furnace under temperature feedback control. In this paper, the aforementioned model is used to simulate the furnace for a batch of forty parts under heuristic temperature set points suggested by the operators of the plant. A model predictive control (MPC system is then developed and deployed to control the the part temperature at the furnace exit thereby preventing the parts from overheating. An energy efficiency gain of 5.3 % was obtained under model predictive control compared to operation under heuristic temperature set points tracked by a regulatory control layer.

Controlled Nonlinear Stochastic Delay Equations: Part I: Modeling and Approximations

International Nuclear Information System (INIS)

Kushner, Harold J.

2012-01-01

This two-part paper deals with “foundational” issues that have not been previously considered in the modeling and numerical optimization of nonlinear stochastic delay systems. There are new classes of models, such as those with nonlinear functions of several controls (such as products), each with is own delay, controlled random Poisson measure driving terms, admissions control with delayed retrials, and others. There are two basic and interconnected themes for these models. The first, dealt with in this part, concerns the definition of admissible control. The classical definition of an admissible control as a nonanticipative relaxed control is inadequate for these models and needs to be extended. This is needed for the convergence proofs of numerical approximations for optimal controls as well as to have a well-defined model. It is shown that the new classes of admissible controls do not enlarge the range of the value functions, is closed (together with the associated paths) under weak convergence, and is approximatable by ordinary controls. The second theme, dealt with in Part II, concerns transportation equation representations, and their role in the development of numerical algorithms with much reduced memory and computational requirements.

Geotectonic aspects of the proterozoic triple junction in the center-south part of Goias state

International Nuclear Information System (INIS)

Valente, C.R.

1986-01-01

The scope of this paper is to made up, in a regional synthesis the tectonical framework of intracontinental proterozoic rifts, from the point of view of an evolutive model through plate tectonic mechanism. based upon lithoenvironment and geotectonics. In this context, this analysis take into account the tectonical interpretation and typification of Canastra, Cuiaba, Estrondo and Tocantins Groups. Structurally these geological entities are found to be settled in rifts of triple junction, in the center-south part of Goias State, individualized among the Oriental Plate (Sao Francisco Craton and Goias Central Massif) Occidental Plate (Amazonic Craton) and Meridional Plate (Paramirim Craton and Parana Block). (author)

CNC Turning Center Advanced Operations. Computer Numerical Control Operator/Programmer. 444-332.

Science.gov (United States)

Skowronski, Steven D.; Tatum, Kenneth

This student guide provides materials for a course designed to introduce the student to the operations and functions of a two-axis computer numerical control (CNC) turning center. The course consists of seven units. Unit 1 presents course expectations and syllabus, covers safety precautions, and describes the CNC turning center components, CNC…

Opioid Prescribing Practices of Neurosurgeons: Analysis of Medicare Part D.

Science.gov (United States)

Khalid, Syed I; Adogwa, Owoicho; Lilly, Daniel T; Desai, Shyam A; Vuong, Victoria D; Mehta, Ankit I; Cheng, Joseph

2018-04-01

The Centers for Disease Control have declared that the United States is amidst a continuing opioid epidemic, with drug overdose-related death tripling between 1999 and 2014. Among the 47,055 overdose-related deaths that occurred in 2014, 28,647 (60.9%) of them involved an opioid. The Part D Prescriber Public Use File, which is based on beneficiaries enrolled in the Medicare Part D prescription drug program, was used to query information on prescription drug events incurred by Medicare beneficiaries with a Part D prescription drug plan from 31 June 2014 to 30 June 2015. Only those providers with the specialty description of neurosurgeon, as reported on the provider's Part B claims, were included in this study. A total of 271,502 beneficiaries, accounting for 971,581 claims and 22,152,689 day supplies of medication, accounted for the $52,956,428.40 paid by the Centers for Medicare and Medicaid Services for medication that the 4085 neurosurgeons submitted to the Centers for Medicare and Medicaid Services Part D program in the 2014 calendar year. During the same year, 402,767 (41.45%) claims for 158,749 (58.47%) beneficiaries accounted for 6,458,624 (29.16%) of the day supplies of medications and $13,962,630.11 (26.37%) of the total money spent by the Centers for Medicare and Medicaid Services Part D that year. Nationwide, the ratio of opioid claims to total Medicare Part D beneficiaries was 1.48. No statistically significant regional differences were found. The opioid misuse epidemic is a complex and national issue with patterns of prescription not significantly different between regions. All neurosurgeons must be cognizant of their prescribing practices so as to best support the resolution of this public health crisis. Copyright © 2017. Published by Elsevier Inc.

Lean Production Control at a High-Variety, Low-Volume Parts Manufacturer

NARCIS (Netherlands)

Bokhorst, Jos A. C.; Slomp, Jannes

2010-01-01

Eaton Electric General Supplies, a parts manufacturing unit that supplies parts for Eaton's electrical business unit, implemented several lean control elements in its high-variety, low-volume production units. These control elements include a constant work-in-process mechanism to limit and control

The Current State of Poison Control Centers in Pakistan and the Need for Capacity Building

Directory of Open Access Journals (Sweden)

Nadeem Khan

2014-03-01

Full Text Available Background: Chemical exposure is a major health problem globally. Poison control centers (PCCs play a leading role both in developed and developing countries in the prevention and control of poisonous chemical exposures. In this study, we aimed to assess the current state of PCCs in Pakistan and highlight capacity building needs in these centers. Methods: A cross-sectional survey of the two registered PCCs was done during August – December 2011. Necessary services of the PCCs were evaluated and the data were recorded on a predesigned checklist. Results: Both PCCs are affiliated to a tertiary care hospital. Clinical services to poisoned patients were available 24 hours a day / 7 days a week. Information on common local products was available to poison center staff. Both centers were involved in undergraduate and post graduate teaching. Telephone poison information service was not available in either of centers. There was a limited capacity for qualitative and analytical toxicology. Common antidotes were available. There were limited surveillance activities to capture toxic risks existing in the community and also a deficiency was observed in chemical disaster planning. Conclusion: PCCs in Pakistan need capacity building for specialized training in toxicology, toxicovigilance, chemical disaster planning, analytical laboratory tests and telephone service for consultation in poisoning cases.   How to cite this article: Khan NU, Mir MU, Khan UR, Khan AR, Ara J, Raja K, et al. The Current State of Poison Control Centers in Pakistan and the Need for Capacity Building. Asia Pac J Med Toxicol 2014;3:31-5.

Infection prevention and control practice for Crimean-Congo hemorrhagic fever-A multi-center cross-sectional survey in Eurasia.

Science.gov (United States)

Fletcher, Tom E; Gulzhan, Abuova; Ahmeti, Salih; Al-Abri, Seif S; Asik, Zahide; Atilla, Aynur; Beeching, Nick J; Bilek, Heval; Bozkurt, Ilkay; Christova, Iva; Duygu, Fazilet; Esen, Saban; Khanna, Arjun; Kader, Çiğdem; Mardani, Masoud; Mahmood, Faisal; Mamuchishvili, Nana; Pshenichnaya, Natalia; Sunbul, Mustafa; Yalcin, Tuğba Y; Leblebicioglu, Hakan

2017-01-01

Crimean Congo Hemorrhagic Fever (CCHF) is a life threatening acute viral infection that presents significant risk of nosocomial transmission to healthcare workers. Evaluation of CCHF infection prevention and control (IP&C) practices in healthcare facilities that routinely manage CCHF cases in Eurasia. A cross-sectional CCHF IP&C survey was designed and distributed to CCHF centers in 10 endemic Eurasian countries in 2016. Twenty-three responses were received from centers in Turkey, Pakistan, Russia, Georgia, Kosovo, Bulgaria, Oman, Iran, India and Kazakhstan. All units had dedicated isolation rooms for CCHF, with cohorting of confirmed cases in 15/23 centers and cohorting of suspect and confirmed cases in 9/23 centers. There was adequate personal protective equipment (PPE) in 22/23 facilities, with 21/23 facilities reporting routine use of PPE for CCHF patients. Adequate staffing levels to provide care reported in 14/23 locations. All centers reported having a high risk CCHFV nosocomial exposure in last five years, with 5 centers reporting more than 5 exposures. Education was provided annually in most centers (13/23), with additional training requested in PPE use (11/23), PPE donning/doffing (12/23), environmental disinfection (12/23) and waste management (14/23). Staff and patient safety must be improved and healthcare associated CCHF exposure and transmission eliminated. Improvements are recommended in isolation capacity in healthcare facilities, use of PPE and maintenance of adequate staffing levels. We recommend further audit of IP&C practice at individual units in endemic areas, as part of national quality assurance programs.

Control of uncertain systems by feedback linearization with neural networks augmentation. Part II. Controller validation by numerical simulation

Directory of Open Access Journals (Sweden)

Adrian TOADER

2010-09-01

Full Text Available The paper was conceived in two parts. Part I, previously published in this journal, highlighted the main steps of adaptive output feedback control for non-affine uncertain systems, having a known relative degree. The main paradigm of this approach was the feedback linearization (dynamic inversion with neural network augmentation. Meanwhile, based on new contributions of the authors, a new paradigm, that of robust servomechanism problem solution, has been added to the controller architecture. The current Part II of the paper presents the validation of the controller hereby obtained by using the longitudinal channel of a hovering VTOL-type aircraft as mathematical model.

Evaluation of completeness of selected poison control center data fields.

Science.gov (United States)

Jaramillo, Jeanie E; Marchbanks, Brenda; Willis, Branch; Forrester, Mathias B

2010-08-01

Poison control center data are used in research and surveillance. Due to the large volume of information, these efforts are dependent on data being recorded in machine readable format. However, poison center records include non-machine readable text fields and machine readable coded fields, some of which are duplicative. Duplicating this data increases the chance of inaccurate/incomplete coding. For surveillance efforts to be effective, coding should be complete and accurate. Investigators identified a convenience sample of 964 records and reviewed the substance code determining if it matched its text field. They also reviewed the coded clinical effects and treatments determining if they matched the notes text field. The substance code matched its text field for 91.4% of the substances. The clinical effects and treatments codes matched their text field for 72.6% and 82.4% of occurrences respectively. This under-reporting of clinical effects and treatments has surveillance and public health implications.

"Carbon in Underland": A multidisciplinary approach to producing an informative animated video for the Center for Nanoscale Control of Geological CO2

Science.gov (United States)

Molins, S.; Cappuccio, J. A.; Berry, I.; Miller, J.; Bourg, I. C.; Kelly, L. M.

2011-12-01

As part of the 'Science for Our Nation's Energy Future, Summit and Forum', each of the 46 Energy Frontier Research Centers (EFRCs) created in 2009 by the US Department of Energy was invited to design a short, engaging film with the central goal to educate, inspire, and entertain an intelligent but not expert audience about the extraordinary science, innovation and people in their center. The Center for Nanoscale Control of Geological CO2 (NCGC) is an EFRC that is building a next generation understanding of molecular-to-pore-scale processes critical to controlling the flow,transport, and ultimate mineralization in porous rock media, in particular as applied to geologic sequestration of CO2. In response to the invitation, the NCGC assembled a team that included several young scientists, the Center project manager, and members from the Public Affairs and Creative Services Office of the Lawrence Berkeley National Laboratory with the objective of preparing a submission. A videographer from the Creative Services Office was responsible for overall management including production, art direction, and editing, while scientists from the Center were responsible for scientific content and original storyline concept. The Center project manager facilitated the communication between team members. A group of scientists together with the project manager developed the original idea, which was refined and given shape as a script in dialogue form by a science writer from Public Affairs. The objective was to communicate scientific content in an entertaining manner with a simple storyline. In a second phase, the script was revised further by scientists for content. Clips from experiments and modeling simulations were requested from the Center's scientists to illustrate the scientific content. Video production and animation were done by the videographer and an animator in an iterative process that involve feedback from the Center team. The final cut was edited to meet the maximum length

Undisturbed stance control in healthy adults is achieved differently along anteroposterior and mediolateral axes: evidence from visual feedback of various signals from center of pressure trajectories.

Science.gov (United States)

Rougier, Patrice R

2009-05-01

Provided through the screen of a monitor, the participant's resultant center of pressure (CPRes) movements from a force platform device, modified the postural performance of a healthy individual. However, these effects could largely vary with the axis that researchers consider (mediolateral [ML] or anteroposterior [AP]), because they know these controls are involved in 2 distinct ankle and hip mechanisms. To demonstrate this organization, the author tested a group of healthy adults in several conditions that gave the whole or some part of the information in the CPRes displacements. Compared with the CPRes feedback, left and right plantar CP or body weight distribution feedback deteriorated the control of the vertically projected center of gravity (CGv) along the ML and AP axes, whose amplitudes increased, respectively. These data highlight the primary role of loading or unloading and pressure variations in the achievement of postural control along each ML or AP axis, respectively. It is interesting that merging these 2 pieces of information (CPRes displacements) helped participants optimize their postural performance.

Engineering of Fermi level by nin diamond junction for control of charge states of NV centers

Science.gov (United States)

Murai, T.; Makino, T.; Kato, H.; Shimizu, M.; Murooka, T.; Herbschleb, E. D.; Doi, Y.; Morishita, H.; Fujiwara, M.; Hatano, M.; Yamasaki, S.; Mizuochi, N.

2018-03-01

The charge-state control of nitrogen-vacancy (NV) centers in diamond is very important toward its applications because the NV centers undergo stochastic charge-state transitions between the negative charge state (NV-) and the neutral charge state (NV0) of the NV center upon illumination. In this letter, engineering of the Fermi level by a nin diamond junction was demonstrated for the control of the charge state of the NV centers in the intrinsic (i) layer region. By changing the size (d) of the i-layer region between the phosphorus-doped n-type layer regions (nin) from 2 μm to 10 μm, we realized the gradual change in the NV- charge-state population in the i-layer region from 60% to 80% under 532 nm excitation, which can be attributed to the band bending in the i-layer region. Also, we quantitatively simulated the changes in the Fermi level in the i-layer region depending on d with various concentrations of impurities in the i-layer region.

Active Vibration Control of Plate Partly Treated with ACLD Using Hybrid Control

Directory of Open Access Journals (Sweden)

Dongdong Zhang

2014-01-01

Full Text Available A finite element model of plate partly treated with ACLD treatments is developed based on the constitutive equations of elastic, piezoelectric, viscoelastic materials and Hamilton’s principle. The Golla-Hughes-Mctavish (GHM method is employed to describe the frequency-dependent characteristics of viscoelastic material (VEM. A model reduction is completed by using iterative dynamic condensation and balance model reduction method to design an effective control system. The emphasis is concerned on hybrid (combined feedback/feedforward control system to attenuate the vibration of plates with ACLD treatments. The optimal linear quadratic Gaussian (LQG controller is considered as a feedback channel and the adaptive filtered-reference LMS (FxLMS controller is used as a feedforward channel. They can be utilized individually or in a hybrid way to suppress the vibration of plate/ACLD system. The results show that the hybrid controller which combines feedback/feedforward together can reduce the displacement amplitude of plate/ACLD system subjected to a complicated disturbance substantially without requiring more control effort. Furthermore, the hybrid controller has more rapid and stable convergence rate than the adaptive feedforward FxLMS controller. Meanwhile, perfect robustness to phase error of the cancellation path in feedforward controller and the weight matrices in feedback LQG controller is demonstrated in proposed hybrid controller. Therefore, its application in structural engineering can be highly appreciated.

DataCenterCooling. Climatization for extreme low energy consumption. Part 1; DataCenterKoeling. Klimatisering voor extreem laag energiegebruik. Deel 1

Energy Technology Data Exchange (ETDEWEB)

Havenaar, D.

2012-12-15

A data center (or computer center) for IT equipment (e.g. servers) has various amenities (e.g. air conditioning, fire alarm system and backup energy / power emergency supply). Additionally, a datacenter consist of fast Internet connections and physical security measures with access and camera control. Previously, each company had irs own server space with energy consuming comfort air conditioning systems in which their ICT equipment was placed [Dutch] Een datacenter (rekencentrum) voor bedrijfskritische ICT-apparatuur zoals servers, heeft diverse voorzieningen (klimaatbeheersing, brandmeldsysteem en back-up energie/noodstroomvoorziening. Daarnaast bevat een datacenter snelle internetverbindingen en is het voorzien van fysieke veiligheidsmaatregelen met toegangscontrole en camerabewaking. Voorheen hadden bedrijven ieder hun eigen serverruimte met energie verslindende comfort airco installaties) waarin hun ICT-apparatuur was geplaatst.

DataCenterCooling. Climatization for extreme low energy consumption. Part 2; DataCenterKoeling. Klimatisering voor extreem laag energiegebruik. Deel 2

Energy Technology Data Exchange (ETDEWEB)

Havenaar, D.

2013-01-15

A data center (or computer center) for IT equipment (e.g. servers) has various amenities (e.g. air conditioning, fire alarm system and backup energy / power emergency supply). Additionally, a datacenter consist of fast Internet connections and physical security measures with access and camera control. Previously, each company had irs own server space with energy consuming comfort air conditioning systems in which their ICT equipment was placed [Dutch] Een datacenter (rekencentrum) voor bedrijfskritische ICT-apparatuur zoals servers, heeft diverse voorzieningen (klimaatbeheersing, brandmeldsysteem en back-up energie/noodstroomvoorziening. Daarnaast bevat een datacenter snelle internetverbindingen en is het voorzien van fysieke veiligheidsmaatregelen met toegangscontrole en camerabewaking. Voorheen hadden bedrijven ieder hun eigen serverruimte met energie verslindende comfort airco installaties) waarin hun ICT-apparatuur was geplaatst.

Sixth NASA Glenn Research Center Propulsion Control and Diagnostics (PCD) Workshop

Science.gov (United States)

Litt, Jonathan S. (Compiler)

2018-01-01

The Intelligent Control and Autonomy Branch at NASA Glenn Research Center hosted the Sixth Propulsion Control and Diagnostics Workshop on August 22-24, 2017. The objectives of this workshop were to disseminate information about research being performed in support of NASA Aeronautics programs; get feedback from peers on the research; and identify opportunities for collaboration. There were presentations and posters by NASA researchers, Department of Defense representatives, and engine manufacturers on aspects of turbine engine modeling, control, and diagnostics.

Control Systems Security Center Comparison Study of Industrial Control System Standards against the Control Systems Protection Framework Cyber-Security Requirements

Energy Technology Data Exchange (ETDEWEB)

Robert P. Evans

2005-09-01

Cyber security standards, guidelines, and best practices for control systems are critical requirements that have been delineated and formally recognized by industry and government entities. Cyber security standards provide a common language within the industrial control system community, both national and international, to facilitate understanding of security awareness issues but, ultimately, they are intended to strengthen cyber security for control systems. This study and the preliminary findings outlined in this report are an initial attempt by the Control Systems Security Center (CSSC) Standard Awareness Team to better understand how existing and emerging industry standards, guidelines, and best practices address cyber security for industrial control systems. The Standard Awareness Team comprised subject matter experts in control systems and cyber security technologies and standards from several Department of Energy (DOE) National Laboratories, including Argonne National Laboratory, Idaho National Laboratory, Pacific Northwest National Laboratory, and Sandia National Laboratories. This study was conducted in two parts: a standard identification effort and a comparison analysis effort. During the standard identification effort, the Standard Awareness Team conducted a comprehensive open-source survey of existing control systems security standards, regulations, and guidelines in several of the critical infrastructure (CI) sectors, including the telecommunication, water, chemical, energy (electric power, petroleum and oil, natural gas), and transportation--rail sectors and sub-sectors. During the comparison analysis effort, the team compared the requirements contained in selected, identified, industry standards with the cyber security requirements in ''Cyber Security Protection Framework'', Version 0.9 (hereafter referred to as the ''Framework''). For each of the seven sector/sub-sectors listed above, one standard was

Is function-based control room design human-centered?

International Nuclear Information System (INIS)

Norros, L.; Savioja, P.

2006-01-01

Function-based approaches to system interface design appears an appealing possibility in helping designers and operators to cope with the vast amount of information needed to control complex processes. In this paper we provide evidence of operator performance analyses showing that outcome-centered performance measures may not be sufficiently informative for design. We need analyses indicating habitual patterns of using information, operator practices. We argue that practices that portray functional orienting to the task support mastery of the process. They also create potential to make use of function-based information presentation. We see that functional design is not an absolute value. Instead, such design should support communication of the functional significance of the process information to the operators in variable situations. Hence, it should facilitate development of practices that focus to interpreting this message. Successful function-based design facilitates putting operations into their contexts and is human-centered in an extended sense: It aids making sense in the complex, dynamic and uncertain environment. (authors)

Effects of voluntary and automatic control of center of pressure sway during quiet standing.

Science.gov (United States)

Ueta, Kozo; Okada, Yohei; Nakano, Hideki; Osumi, Michihiro; Morioka, Shu

2015-01-01

The authors investigated the effects of voluntary and automatic control on the spatial variables (envelope area, maximal amplitude, and root mean square [RMS]) of center of pressure (COP) displacement during quiet standing and identified differences in their postural control strategies (mean velocity [MV], mean power frequency [MPF], and power density). COP data were recorded under relaxed (experimental control), still (voluntary control), and dual (automatic control) conditions. RMS was significantly lower in the still and dual conditions than in the relaxed condition. MV, MPF, and power density were significantly higher in the still condition than in the dual condition. These results indicate that both voluntary and automatic control decrease the spatial variables of COP displacement; however, their postural control strategies are different.

Graphical user interfaces for McCellan Nuclear Radiation Center (MNRC)

International Nuclear Information System (INIS)

Brown-VanHoozer, S. A.

1998-01-01

McClellan's Nuclear Radiation Center (MNRC) control console is in the process of being replaced due to spurious scrams, outdated software, and obsolete parts. The intent of the new control console is to eliminate the existing problems by installing a UNIX-based computer system with industry-standard interface software and incorporating human factors during all stages of the graphical user interface (GUI) development and control console design

Design electronic of manual control for cobalt unit Alcyon II of the National Center of Radiotherapy

International Nuclear Information System (INIS)

Morraz V, E.; Campos, X.

2002-01-01

A manual control for the cobalt unit, of French production, it was designed by the team of electronic of the national center of radiotherapy with materials found in the national trade. The control has the same characteristics that the original one and it is also adapted a switch from which you can control the lights of the room of the cobalt

Centering and alignment device of a fuel assembling under a heart upper sheet of a pressure water nuclear reactor and centering piece replacement process

International Nuclear Information System (INIS)

Bougis, J.C.

1994-01-01

The crossing opening of the heart upper sheet contains a central part and two end parts of which diameter is higher than the central part one. The centering piece contains a head putting down, thanks to a support part, on a retaining of the opening, a centering and positioning smooth part and a threaded part. The device also contains a nut screwed on the threaded part of the centering piece so far as to come supporting on a retaining of the opening. The nut is made not unscrewed thanks to a stopping washer soldered inside the end part of the crossing opening. (Author). 3 figs., 5 refs

76 FR 28438 - Board of Scientific Counselors (BSC), National Center for Injury Prevention and Control (NCIPC)

Science.gov (United States)

2011-05-17

... below concerns RFA CE10-004, the National Academic Centers of Excellence in Youth Violence Prevention... Violence Prevention (U01). Contact Person for More Information: Gwendolyn Haile Cattledge, PhD, M.S.E.H., F... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of...

Electrical, Electronic, and Electromechanical (EEE) Parts Management and Control Requirements for Space Flight Hardware and Critical Ground Support Equipment...aka... The NASA EEE Parts Standard, NASA-STD 8739.10

Science.gov (United States)

Majewicz, Peter; Sampson, Michael

2016-01-01

Describes development and content of a new NASA Standard for Electrical Electronic and Electromechanical (EEE) parts. This Standard reflects current practices, instead of changing them. Most NASA Centers utilize local documents, but there is minimal consistency across the Agency. A gap analysis clearly shows the differences that exist among the different centers and with respect to the NASA Parts Policy. Once approved, the new standard can be referenced in contracts and agreements with organizations outside of NASA.

Management of pelvic inflammatory disease by primary care physicians. A comparison with Centers for Disease Control and Prevention guidelines.

Science.gov (United States)

Hessol, N A; Priddy, F H; Bolan, G; Baumrind, N; Vittinghoff, E; Reingold, A L; Padian, N S

1996-01-01

The Centers for Disease Control and Prevention published recommendations for clinicians on the management of pelvic inflammatory disease, but it is unknown if providers are aware of the guidelines or follow them. To compare pelvic inflammatory disease screening, diagnosis, treatment, and reporting practices among primary care physicians with the Centers for Disease Control and Prevention guidelines for pelvic inflammatory disease. A weighted random sample of California primary care physicians surveyed in November 1992 and January 1993. Of the 1,165 physicians surveyed, 553 (48%) returned completed questionnaires. Among respondents, 302 (55%) reported having treated a case of pelvic inflammatory disease during the last 12 months, and of these, 52% answered that they were unsure of or do not follow the Centers for Disease Control and Prevention guidelines for pelvic inflammatory disease. Pediatricians and those with more years since residency were less likely to deviate from the Centers for Disease Control and Prevention guidelines for pelvic inflammatory disease, and family practitioners were more likely to deviate from the guidelines. Pelvic inflammatory disease is commonly encountered by primary care physicians in California. Training and experience were important predictors of compliance with the Centers for Disease Control and Prevention recommendations; however, substantial divergence from the guidelines occurs.

Maintenance cost control at the Pacific Missile Test Center.

OpenAIRE

Jenson, Richard J.

1980-01-01

Approved for public release; distribution is unlimited The Pacific Missile Test Center (PMTC) is the Navy's largest Major Range and Test Facility Base, with an investment of over one billion dollars. The majority of this investment is in range test equipment and facilities including radar, telemetry, communication and command/ control systems. Concern is growing over the "excessively obsolete condition of PMTC technical equipment." Improvement of factors concerned with...

Design and Operational Evaluation of the Traffic Management Advisor at the Ft. Worth Air Route Traffic Control Center

Science.gov (United States)

Swenson, Harry N.; Vincent, Danny; Tobias, Leonard (Technical Monitor)

1997-01-01

NASA and the FAA have designed and developed and an automation tool known as the Traffic Management Advisor (TMA). The system was operationally evaluated at the Ft. Worth Air Route Traffic Control Center (ARTCC). The TMA is a time-based strategic planning tool that provides Traffic Management Coordinators and En Route Air Traffic Controllers the ability to efficiently optimize the capacity of a demand impacted airport. The TMA consists of trajectory prediction, constraint-based runway scheduling, traffic flow visualization and controllers advisories. The TMA was used and operationally evaluated for forty-one rush traffic periods during a one month period in the Summer of 1996. The evaluations included all shifts of air traffic operations as well as periods of inclement weather. Performance data was collected for engineering and human factor analysis and compared with similar operations without the TMA. The engineering data indicates that the operations with the TMA show a one to two minute per aircraft delay reduction during rush periods. The human factor data indicate a perceived reduction in en route controller workload as well as an increase in job satisfaction. Upon completion of the evaluation, the TMA has become part of the normal operations at the Ft. Worth ARTCC.

Comparison of mental health, happiness, and emotion control with adolescents’ residential centers of state welfare organization and family reared adolescents

Directory of Open Access Journals (Sweden)

Laila Bawi

2016-03-01

Full Text Available Background and Objective: Many research indicated that adolescents’ residential centers have the high possibility to diagnose with psychological disorders. Therefore, the aim of this study was investigated the mental health, happiness and emotion control among adolescents’ residential centers of state welfare organization.Materials and Methods: This research is a causal –comparative research. The 80 adolescents’ residential centers were chosen through available sampling and 80 adolescents of schools of Alborz city were selected through cluster method. Statistical analysis was conducted by using the independent t-test. The research instruments were Emotion Control Questionnaire (ECQ, General Health Questionnaire (GHQ, Goldenberg, and Oxford Happiness Inventory (OHI.Results: The significantly different was observed in mental health, happiness and emotion control between two adolescents groups (p<0.05.Conclusion: The results indicate that the institutional-reared decrease the level of mental health, happiness and emotion control in adolescents. Thus, counselors should be considered these factors in therapeutic intervention to enhancing the mental health of adolescents’ residential centers.

Spacecraft control center automation using the generic inferential executor (GENIE)

Science.gov (United States)

Hartley, Jonathan; Luczak, Ed; Stump, Doug

1996-01-01

The increasing requirement to dramatically reduce the cost of mission operations led to increased emphasis on automation technology. The expert system technology used at the Goddard Space Flight Center (MD) is currently being applied to the automation of spacecraft control center activities. The generic inferential executor (GENIE) is a tool which allows pass automation applications to be constructed. The pass script templates constructed encode the tasks necessary to mimic flight operations team interactions with the spacecraft during a pass. These templates can be configured with data specific to a particular pass. Animated graphical displays illustrate the progress during the pass. The first GENIE application automates passes of the solar, anomalous and magnetospheric particle explorer (SAMPEX) spacecraft.

Quantum Control of a Nitrogen-Vacancy Center using Surface Acoustic Waves in the Resolved Sideband Limit

Science.gov (United States)

Golter, David; Oo, Thein; Amezcua, Maira; Wang, Hailin

Micro-electromechanical systems research is producing increasingly sophisticated tools for nanophononic applications. Such technology is well-suited for achieving chip-based, integrated acoustic control of solid-state quantum systems. We demonstrate such acoustic control in an important solid-state qubit, the diamond nitrogen-vacancy (NV) center. Using an interdigitated transducer to generate a surface acoustic wave (SAW) field in a bulk diamond, we observe phonon-assisted sidebands in the optical excitation spectrum of a single NV center. This exploits the strong strain sensitivity of the NV excited states. The mechanical frequencies far exceed the relevant optical linewidths, reaching the resolved-sideband regime. This enables us to use the SAW field for driving Rabi oscillations on the phonon-assisted optical transition. These results stimulate the further integration of SAW-based technologies with the NV center system.

System of automatic control over data Acquisition and Transmission to IGR NNC RK Data Center

International Nuclear Information System (INIS)

Komarov, I.I.; Gordienko, D.D.; Kunakov, A.V.

2005-01-01

Automated system for seismic and acoustic data acquisition and transmission in real time was established in Data Center IGR NNC RK, which functions very successively. The system monitors quality and volume of acquired information and also controls the status of the system and communication channels. Statistical data on system operation are accumulated in created database. Information on system status is reflected on the Center Web page. (author)

Hypertension Control and co-morbidities in primary health care centers in Riyadh

Energy Technology Data Exchange (ETDEWEB)

Al-Tuwijri, Abdulmohsin A [Dept. of Family Medicine, Ministry of Health, Riyadh (Saudi Arabia); Al-Rukban, Mohammed Othman [Dept. of Family and Community Medicine, Coll. of Medicine, King Saud Univ., Riyadh (Saudi Arabia)

2006-07-01

The prevalence of hypertension in Saudi Arabia has been assessed only in preliminary reports. The aim of this study was to determine the degree of control of blood pressure and the prevalence of common hypertension co-morbidities among hypertensive patients attending primary health care (PHC) centers in Riyadh. A cross sectional study was conducted by reviewing medical records of hypertensive patients during May and June 2001. Two hundred fifty-five medical records selected by a stratified randomization process according to the distribution of the 73 PHC centers in the city and the total number of hypertensive patients registered in the mini-clinic of each PHC-center. Trained mini-clinic nurses collected data using a data collection form developed for this purpose. Of 255 patients, 121 (47.5%) were males and 134 (52.5%) were females, the mean age was 57.2+-11.1 years and 8.3% were smokers. The majority 204 (85.7%) had greater than normal body weight. Only 101 (40.4%) had controlled systolic BP. The most common co-morbidity was diabetes mellitus found in 98 (38.4%), followed by dislipidemia in 50 (19.6%), bronchial asthma in 28 (11.0%) and renal diseases in 12 (4.7%). Except for osteoporosis, which was reported by females only (P=0.003), the occurrences of hypertensive co-morbidities did not vary from other demographic characteristics. This study demonstrated poor blood pressure control in the mini-clinics in the PHC-centers. To improve the quality of care for hypertensive patients, we recommend an improvement in PHC physician knowledge of and attitudes toward the importance of achieving targeted blood pressure levels. (author)

Hypertension Control and co-morbidities in primary health care centers in Riyadh

International Nuclear Information System (INIS)

Al-Tuwijri, Abdulmohsin A.; Al-Rukban, Mohammed Othman

2006-01-01

The prevalence of hypertension in Saudi Arabia has been assessed only in preliminary reports. The aim of this study was to determine the degree of control of blood pressure and the prevalence of common hypertension co-morbidities among hypertensive patients attending primary health care (PHC) centers in Riyadh. A cross sectional study was conducted by reviewing medical records of hypertensive patients during May and June 2001. Two hundred fifty-five medical records selected by a stratified randomization process according to the distribution of the 73 PHC centers in the city and the total number of hypertensive patients registered in the mini-clinic of each PHC-center. Trained mini-clinic nurses collected data using a data collection form developed for this purpose. Of 255 patients, 121 (47.5%) were males and 134 (52.5%) were females, the mean age was 57.2+-11.1 years and 8.3% were smokers. The majority 204 (85.7%) had greater than normal body weight. Only 101 (40.4%) had controlled systolic BP. The most common co-morbidity was diabetes mellitus found in 98 (38.4%), followed by dislipidemia in 50 (19.6%), bronchial asthma in 28 (11.0%) and renal diseases in 12 (4.7%). Except for osteoporosis, which was reported by females only (P=0.003), the occurrences of hypertensive co-morbidities did not vary from other demographic characteristics. This study demonstrated poor blood pressure control in the mini-clinics in the PHC-centers. To improve the quality of care for hypertensive patients, we recommend an improvement in PHC physician knowledge of and attitudes toward the importance of achieving targeted blood pressure levels. (author)

75 FR 4830 - Advisory Committee to the Director (ACD), Centers for Disease Control (CDC) and Prevention-Ethics...

Science.gov (United States)

2010-01-29

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Advisory Committee to the Director (ACD), Centers for Disease Control (CDC) and Prevention--Ethics Subcommittee (ES..., CDC, regarding a broad range of public health ethics questions and issues arising from programs...

Using magnetic levitation for non-destructive quality control of plastic parts.

Science.gov (United States)

Hennek, Jonathan W; Nemiroski, Alex; Subramaniam, Anand Bala; Bwambok, David K; Yang, Dian; Harburg, Daniel V; Tricard, Simon; Ellerbee, Audrey K; Whitesides, George M

2015-03-04

Magnetic levitation (MagLev) enables rapid and non-destructive quality control of plastic parts. The feasibility of MagLev as a method to: i) rapidly assess injection-molded plastic parts for defects during process optimization, ii) monitor the degradation of plastics after exposure to harsh environmental conditions, and iii) detect counterfeit polymers by density is demonstrated. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

ONAV - An Expert System for the Space Shuttle Mission Control Center

Science.gov (United States)

Mills, Malise; Wang, Lui

1992-01-01

The ONAV (Onboard Navigation) Expert System is being developed as a real-time console assistant to the ONAV flight controller for use in the Mission Control Center at the Johnson Space Center. Currently, Oct. 1991, the entry and ascent systems have been certified for use on console as support tools, and were used for STS-48. The rendezvous system is in verification with the goal to have the system certified for STS-49, Intelsat retrieval. To arrive at this stage, from a prototype to real-world application, the ONAV project has had to deal with not only Al issues but operating environment issues. The Al issues included the maturity of Al languages and the debugging tools, verification, and availability, stability and size of the expert pool. The environmental issues included real time data acquisition, hardware suitability, and how to achieve acceptance by users and management.

Multi-echelon, multi-indenture spare parts inventory control subject to system availability and budget constraints

International Nuclear Information System (INIS)

Costantino, Francesco; Di Gravio, Giulio; Tronci, Massimo

2013-01-01

Inventory management of spare parts is one of the most critical issues in the aeronautical industry, given the required level of system availability related to the strategic importance and high stocking costs of the components. Even if a large number of spare parts increases warehousing costs, every single shortage have a greater impact: the adoption of best-in-class inventory management techniques becomes crucial. On these considerations, the paper presents an innovative model of spare parts allocation for the Italian Air Force with the aim of minimizing backorders and, at the same time, ensuring an availability of 99% depending on the actual flight plan. The model, solved by a marginal analysis, considers an original configuration of features combining different skills of maintenance centers in a hierarchical multi-echelon, multi-item, multi-indenture structure. A real case is provided in order to analyze the solving method and the results. -- Highlights: •We studied a problem of allocations for spare parts of aeronautical systems. •The model presents different repair capabilities of maintenance centers. •The model fits constraints on budget and on total operational availability. •The model is solved by a marginal analysis with a backorder/price ratio. •A numerical example shows a spare parts allocation with relative considerations

Virtual Parts Engineering Research Center

Science.gov (United States)

2010-05-20

engineering 10 materials. High strength alloys , composites (polymer composites and metallic composites), and the like cannot merely be replaced by...ceramics, smart materials, shape memory alloys , super plastic materials and nano- structured materials may be more appropriate substitutes in a reverse...molding process using thermosetting Bakelite. For remanufacturing the part in small quantities, machining has been identified as the most economical

Re-centering variable friction device for vibration control of structures subjected to near-field earthquakes

Science.gov (United States)

Ozbulut, Osman E.; Hurlebaus, Stefan

2011-11-01

This paper proposes a re-centering variable friction device (RVFD) for control of civil structures subjected to near-field earthquakes. The proposed hybrid device has two sub-components. The first sub-component of this hybrid device consists of shape memory alloy (SMA) wires that exhibit a unique hysteretic behavior and full recovery following post-transformation deformations. The second sub-component of the hybrid device consists of variable friction damper (VFD) that can be intelligently controlled for adaptive semi-active behavior via modulation of its voltage level. In general, installed SMA devices have the ability to re-center structures at the end of the motion and VFDs can increase the energy dissipation capacity of structures. The full realization of these devices into a singular, hybrid form which complements the performance of each device is investigated in this study. A neuro-fuzzy model is used to capture rate- and temperature-dependent nonlinear behavior of the SMA components of the hybrid device. An optimal fuzzy logic controller (FLC) is developed to modulate voltage level of VFDs for favorable performance in a RVFD hybrid application. To obtain optimal controllers for concurrent mitigation of displacement and acceleration responses, tuning of governing fuzzy rules is conducted by a multi-objective heuristic optimization. Then, numerical simulation of a multi-story building is conducted to evaluate the performance of the hybrid device. Results show that a re-centering variable friction device modulated with a fuzzy logic control strategy can effectively reduce structural deformations without increasing acceleration response during near-field earthquakes.

Aplicación de RT-Linux en el control de motores de pasos. Parte II; Appication of RT-Linux in the Control of Steps Motors. Part II

Directory of Open Access Journals (Sweden)

Ernesto Duany Renté

2011-02-01

Full Text Available Este trabajo complementa al presentado anteriormente: "Aplicación de RT-Linux en el control de motoresde pasos. Primera parte", de manera que se puedan relacionar a las tareas de adquisición y control para laobtención de un sistema lo más exacto posible. Las técnicas empleadas son las de tiempo real aprovechandolas posibilidades del microkernel RT-Linux y los software libres contenidos en sistemas Unix/Linux. Lasseñales se obtienen mediante un conversor AD y mostradas en pantalla empleando el Gnuplot.  The work presented in this paper is a complement to the control and acquisition tasks which were explainedin "Application of RT-Linux in the Control of Steps Motors. First Part", so that those both real time taskscan be fully related in order to make the whole control system more accurate. The employed techniquesare those of Real Time Taking advantage of the possibilities of the micro kernel RT-Linux and the freesoftware distributed in the Unix/Linux operating systems. The signals are obtained by means of an ADconverter and are shown in screen using Gnuplot.

Preclinical students’ experiences in early clerkships after skills training partly offered in primary health care centers: a qualitative study from Indonesia

Science.gov (United States)

2012-01-01

Background Students may encounter difficulties when they have to apply clinical skills trained in their pre-clinical studies in clerkships. Early clinical exposure in the pre-clinical phase has been recommended to reduce these transition problems. The aim of this study is to explore differences in students' experiences during the first clerkships between students exclusively trained in a skills laboratory and peers for whom part of their skills training was substituted by early clinical experiences (ECE). Methods Thirty pre-clinical students trained clinical skills exclusively in a skills laboratory; 30 peers received part of their skills training in PHC centers. Within half a year after commencing their clerkships all 60 students shared their experiences in focus group discussions (FGDs). Verbatim transcripts of FGDs were analyzed using Atlas-Ti software. Results Clerkship students who had participated in ECE in PHC centers felt better prepared to perform their clinical skills during the first clerkships than peers who had only practiced in a skills laboratory. ECE in PHC centers impacted positively in particular on students’ confidence, clinical reasoning, and interpersonal communication. Conclusion In the Indonesian setting ECE in PHC centers reduce difficulties commonly encountered by medical students in the first clerkships. PMID:22640419

REPLACEMENT SPARE PART INVENTORY MONITORING USING ADAPTIVE NEURO FUZZY INFERENCE SYSTEM

Directory of Open Access Journals (Sweden)

Hartono Hartono

2016-01-01

Full Text Available Abstract   The amount of inventory is determined on the basis of the demand. So that users can know the demand forecasts need to be done on the request. This study uses the data to implement a replacement parts on the electronic module production equipment in the telecommunications transmission systems, switching, access and power, ie by replacing the electronic module in the system is trouble  or damaged parts of a good electronic module spare parts inventory, while the faulty electronic modules shipped to the Repair Center for repaired again, so that the results of these improvements can replenish spare part  inventory. Parameters speed on improvement process of electronic module broken (repaired, in the form of an average repair time at the repair centers, in order to get back into the electronic module that is ready for used as spare parts in compliance with the safe supply inventory  warehouse.  This research using the method  of  Adaptive Neuro Fuzzy Inference System (ANFIS in developing a decision support system for inventory control of spare parts available in Warehouse Inventory taking into account several parameters supporters, namely demand, improvement and fulfillment of spare parts and repair time. This study uses a recycling input parameter repair faulty electronic module of the customer to immediately replace the module in inventory warehouse,  do improvements in the Repair Center. So the acceleration restoration factor is very influential as the input spare parts inventory supply in the warehouse and using the Adaptive Neuro-Fuzzy Inference System (ANFIS method.   Keywords: ANFIS, inventory control, replacement

76 FR 57744 - Advisory Committee to the Director (ACD), Centers for Disease Control and Prevention (CDC)-Ethics...

Science.gov (United States)

2011-09-16

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Advisory Committee to the Director (ACD), Centers for Disease Control and Prevention (CDC)--Ethics Subcommittee (ES) Correction: This notice was published in the Federal Register on September 8, 2011, Volume 76, Number 174...

[Using the subcutaneous approach for symptoms control in a health center].

Science.gov (United States)

Pascual López, L; Portaceli Armiñana, A; Ros Sáez, A

2001-01-01

To describe the use of the subcutaneous tract for symptoms control in patients those are in phase of palliative treatment of their illness. Observational study. Primary care. Patients seen in a health center, in phase of palliative treatment of their illness, that needed for symptoms control the subcutaneous administration of drugs. Most of the patients were in terminal phase (19), the fundamental cause (17 cases) that justified the use of the subcutaneous tract was the difficulty to take drugs by oral tract in the last days of life, attention on death throes. The infusion continuous through injector type travenol, at an infusion speed of 2 ml/h, it was the most common way of drug administration (19 patients). The drugs and initial average dose most used were: morphine 19 patients dose 100 mg/24 h, hyoscine butylbromide (Buscapina), 13 patients, 60 mg/24 h, haloperidol 12 patients, 4 mg/24 h. The patients death was the main cause that justified the retirement of the continuous infusion (17 people sick), happening in its own home. Symptoms control was good or very good in the most of patients (14). The experience on using the subcutaneous tract for symptoms control in our health center is positive, being the fundamental cause for its use symptoms control in the last days of the patients life. The continuous subcutaneous infusion should be used in primary attention, as an usual technique for the symptoms control in patients that are in phase of palliative treatment of their illness.

Adaptation of center of mass control under microgravity in a whole-body lifting task

NARCIS (Netherlands)

Kingma, I.; Toussaint, H.M.; Commissaris, D.A.C.M.; Savelsbergh, G.J.P.

1999-01-01

Human balance in stance is usually defined as the preservation of the vertical projection of the center of mass (COM) on the support area formed by the feet. Under microgravity conditions, the control of equilibrium seems to be no longer required. However, several reports indicate preservation of

Adaptation effects in static postural control by providing simultaneous visual feedback of center of pressure and center of gravity.

Science.gov (United States)

Takeda, Kenta; Mani, Hiroki; Hasegawa, Naoya; Sato, Yuki; Tanaka, Shintaro; Maejima, Hiroshi; Asaka, Tadayoshi

2017-07-19

The benefit of visual feedback of the center of pressure (COP) on quiet standing is still debatable. This study aimed to investigate the adaptation effects of visual feedback training using both the COP and center of gravity (COG) during quiet standing. Thirty-four healthy young adults were divided into three groups randomly (COP + COG, COP, and control groups). A force plate was used to calculate the coordinates of the COP in the anteroposterior (COP AP ) and mediolateral (COP ML ) directions. A motion analysis system was used to calculate the coordinates of the center of mass (COM) in both directions (COM AP and COM ML ). The coordinates of the COG in the AP direction (COG AP ) were obtained from the force plate signals. Augmented visual feedback was presented on a screen in the form of fluctuation circles in the vertical direction that moved upward as the COP AP and/or COG AP moved forward and vice versa. The COP + COG group received the real-time COP AP and COG AP feedback simultaneously, whereas the COP group received the real-time COP AP feedback only. The control group received no visual feedback. In the training session, the COP + COG group was required to maintain an even distance between the COP AP and COG AP and reduce the COG AP fluctuation, whereas the COP group was required to reduce the COP AP fluctuation while standing on a foam pad. In test sessions, participants were instructed to keep their standing posture as quiet as possible on the foam pad before (pre-session) and after (post-session) the training sessions. In the post-session, the velocity and root mean square of COM AP in the COP + COG group were lower than those in the control group. In addition, the absolute value of the sum of the COP - COM distances in the COP + COG group was lower than that in the COP group. Furthermore, positive correlations were found between the COM AP velocity and COP - COM parameters. The results suggest that the novel visual feedback

Joint Center Estimation Using Single-Frame Optimization: Part 1: Numerical Simulation

OpenAIRE

Eric Frick; Salam Rahmatalla

2018-01-01

The biomechanical models used to refine and stabilize motion capture processes are almost invariably driven by joint center estimates, and any errors in joint center calculation carry over and can be compounded when calculating joint kinematics. Unfortunately, accurate determination of joint centers is a complex task, primarily due to measurements being contaminated by soft-tissue artifact (STA). This paper proposes a novel approach to joint center estimation implemented via sequential applic...

Quality assurance in a cask fleet parts control system

International Nuclear Information System (INIS)

Fernandez, C.; McCreery, P.N.; Shappert, L.B.

1991-01-01

Applicable portions of the eighteen Quality Assurance criteria of Subpart H, 10 CFR 71 are incorporated into a relational data base system which has been designed to manage the spare parts control system for a fleet of spent nuclear fuel casks. The system includes not only parts in warehouse storage but parts in use in the field plus casks, ancillary equipment, test equipment, support devices, and even personnel. It provides a high degree of assurance that any device for which a condition for certification has expired will be flagged for recertification testing or removal from service well before the critical date

IEEE Std 649-1980: IEEE standard for qualifying Class 1E motor control centers for nuclear power generating stations

International Nuclear Information System (INIS)

Anon.

1992-01-01

This standard describes the basic principles, requirements, and methods for qualifying Class 1E motor control centers for outside containment applications in nuclear power generating stations. Qualification of motor control centers located inside containment in a nuclear power generating station is beyond the scope of this standard. The purpose of this standard is (1) to define specific qualification requirements for Class 1E motor control centers in accordance with the more general qualification requirements of IEEE Std 323-1974, IEE Standard for Qualifying Class 1E Equipment for Nuclear Power Generating Stations; (2) to provide guidance in establishing a qualification program for demonstrating the design adequacy of Class 1E motor control centers in nuclear power generating station applications

Nuclear Energy Center Site Survey, 1975. Part I. Summary and conclusions

International Nuclear Information System (INIS)

1976-01-01

The Nuclear Energy Center Site Survey is a study of a potential siting approach for projected power and fuel-cycle facilities that would cluster sizable groups of such facilities on a relatively small number of sites, as contrasted with current dispersed siting practices. Three basic types of nuclear energy centers (NECs) are considered: power-plant centers, involving ten to forty units of 1200-megawatt electric capacity each; fuel-cycle centers, involving fuel reprocessing plants, mixed-oxide fuel fabrication facilities, and high-level and transuranic radioactive waste management facilities, with a capacity corresponding to the fuel throughput of power plants with a total capacity of approximately 50,000 to 300,000 MWe; and combined centers, containing both power plants and fuel cycle facilities in representative possible combinations. Included among the principal issues considered in evaluation of feasibility of nuclear energy centers are dissipation of the waste heat from the power-generating facilities; transmission system design, reliability, and economics; radiological impact; and environmental impact

77 FR 41188 - Advisory Committee on Breast Cancer in Young Women, Centers for Disease Control and Prevention...

Science.gov (United States)

2012-07-12

... Committee on Breast Cancer in Young Women, Centers for Disease Control and Prevention: Notice of Charter..., that the Advisory Committee on Breast Cancer in Young Women, Centers for Disease Control and Prevention... Committee on Breast Cancer in Young Women, HHS, CDC, 4770 Buford Highway, NE., Mailstop K52, Atlanta...

Infection prevention and control and the refugee population: Experiences from the University of Louisville Global Health Center.

Science.gov (United States)

Carrico, Ruth M; Goss, Linda; Wiemken, Timothy L; Bosson, Rahel S; Peyrani, Paula; Mattingly, William A; Pauly, Allison; Ford, Rebecca A; Kotey, Stanley; Ramirez, Julio A

2017-06-01

During 2016, approximately 140,000 individuals entered the United States as part of the federal government refugee resettlement program and established themselves in communities in virtually every state. No national database regarding refugee health currently exists; therefore, little is known about existing infectious diseases, conditions, and cultural practices that impact successful acculturation. The objective of this report is to identify what is currently known about refugees and circumstances important to infection prevention and control with respect to their roles as new community members, employees, and consumers of health care. Using data from the University of Louisville Global Health Center's Newly Arriving Refugee Surveillance System, health issues affecting refugees from the perspective of a community member, an employee, and a patient were explored. Lack of immunity to vaccine-preventable diseases is the most widespread issue impacting almost every adult, adolescent, and child refugee resettled in Kentucky. Health issues of concern from an infection prevention and control perspective include latent tuberculosis infection, HIV, hepatitis B, hepatitis C, syphilis, and parasites. Other health conditions that may also be important include anemia, obesity, oral health, diabetes, and cardiovascular disease. Refugee resettlement provides motivation for collaborative work among those responsible for infection prevention and control in all settings, their public health partners, and those responsible for and interested in community workforce concerns. Copyright © 2017 Association for Professionals in Infection Control and Epidemiology, Inc. Published by Elsevier Inc. All rights reserved.

Nonsomatotopic organization of the higher motor centers in octopus.

Science.gov (United States)

Zullo, Letizia; Sumbre, German; Agnisola, Claudio; Flash, Tamar; Hochner, Binyamin

2009-10-13

Hyperredundant limbs with a virtually unlimited number of degrees of freedom (DOFs) pose a challenge for both biological and computational systems of motor control. In the flexible arms of the octopus, simplification strategies have evolved to reduce the number of controlled DOFs. Motor control in the octopus nervous system is hierarchically organized. A relatively small central brain integrates a huge amount of visual and tactile information from the large optic lobes and the peripheral nervous system of the arms and issues commands to lower motor centers controlling the elaborated neuromuscular system of the arms. This unique organization raises new questions on the organization of the octopus brain and whether and how it represents the rich movement repertoire. We developed a method of brain microstimulation in freely behaving animals and stimulated the higher motor centers-the basal lobes-thus inducing discrete and complex sets of movements. As stimulation strength increased, complex movements were recruited from basic components shared by different types of movement. We found no stimulation site where movements of a single arm or body part could be elicited. Discrete and complex components have no central topographical organization but are distributed over wide regions.

Electric Power Research Institute Environmental Control Technology Center: Report to the Steering Committee, June 1996

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-06-01

Operations and maintenance continued this month at the Electric Power Research Institute`s (EPRI`s) Environmental Control Technology Center (ECTC). Testing for the Hazardous Air Pollutant (HAP) test block was conducted using the 4.0 MW Spray Dryer Absorber System (SDA) and Pulse Jet Fabric Filter (PJFF) - Carbon Injection System. Investigations also continued across the B&W/CHX Heat Exchanger unit, while the 1.0 MW Selective Catalytic Reduction (SCR) unit remained idle this month in a cold-standby mode as monthly inspections were conducted. Pilot Testing Highlights Testing efforts in June were focused on the HAP test block and the Trace Elements Removal (TER) test block. Both programs were conducted on the 4.0 MW wet FGD pilot unit and PJFF unit. The HAP test block was temporarily concluded in June to further review the test data. This program began in March as part of the DOE Advanced Power Systems Program; the mission of this program is to accelerate the commercialization of affordable, high-efficiency, low-emission, coal-fueled electric generating technologies. The 1996 HAP test block focuses on three research areas, including: Catalytic oxidation of vapor-phase elemental mercury; Enhanced particulate-phase HAPs removal by electrostatic charging of liquid droplets; and Enhanced mercury removal by addition of additives to FGD process liquor. The TER test block is part of EPRI`s overall program to develop control technology options for reduction of trace element emissions. This experimental program investigates mercury removal and mercury speciation under different operating conditions.

Quality assurance in a cask fleet parts control system

International Nuclear Information System (INIS)

Fernandez, C.; Shappert, L.B.

1992-01-01

This paper discusses applicable portions of the eighteen Quality Assurance criteria of Subpart H, 10 CFR 71 which are incorporated into a relational data base system which has been designed to manage the spare parts control system for a fleet of spent nuclear fuel casks. The system includes not only parts in warehouse storage but parts in use in the field plus casks, ancillary equipment, test equipment, support devices, and even personnel. It provides a high degree of assurance that any device for which a condition for certification has expired will be flagged for recertification testing or removal from service well before the critical date

A survey on control schemes for distributed solar collector fields. Part II: Advanced control approaches

Energy Technology Data Exchange (ETDEWEB)

Camacho, E.F.; Rubio, F.R. [Universidad de Sevilla, Escuela Superior de Ingenieros, Departamento de Ingenieria de Sistemas y Automatica, Camino de Los Descubrimientos s/n, E-41092 Sevilla (Spain); Berenguel, M. [Universidad de Almeria, Departamento de Lenguajes y Computacion, Area de Ingenieria de Sistemas y Automatica, Carretera Sacramento s/n, E-04120 La Canada, Almeria (Spain); Valenzuela, L. [Plataforma Solar de Almeria - CIEMAT, Carretera Senes s/n, P.O. Box 22, E-04200 Tabernas (Almeria) (Spain)

2007-10-15

This article presents a survey of the different advanced automatic control techniques that have been applied to control the outlet temperature of solar plants with distributed collectors during the last 25 years. A classification of the modeling and control approaches described in the first part of this survey is used to explain the main features of each strategy. The treated strategies range from classical advanced control strategies to those with few industrial applications. (author)

Factors affecting sustainable animal trypanosomosis control in parts ...

African Journals Online (AJOL)

This study examined the factors affecting sustainable trypanosomiasis control in parts of Kaduna State within the sub-humid savannah ecological zone of Nigeria. Focus group discussions were ... More awareness and preference for pour-on and aerial spraying were higher than the use of traps, target or screens. Rearing of ...

Internet Protocol Display Sharing Solution for Mission Control Center Video System

Science.gov (United States)

Brown, Michael A.

2009-01-01

With the advent of broadcast television as a constant source of information throughout the NASA manned space flight Mission Control Center (MCC) at the Johnson Space Center (JSC), the current Video Transport System (VTS) characteristics provides the ability to visually enhance real-time applications as a broadcast channel that decision making flight controllers come to rely on, but can be difficult to maintain and costly. The Operations Technology Facility (OTF) of the Mission Operations Facility Division (MOFD) has been tasked to provide insight to new innovative technological solutions for the MCC environment focusing on alternative architectures for a VTS. New technology will be provided to enable sharing of all imagery from one specific computer display, better known as Display Sharing (DS), to other computer displays and display systems such as; large projector systems, flight control rooms, and back supporting rooms throughout the facilities and other offsite centers using IP networks. It has been stated that Internet Protocol (IP) applications are easily readied to substitute for the current visual architecture, but quality and speed may need to be forfeited for reducing cost and maintainability. Although the IP infrastructure can support many technologies, the simple task of sharing ones computer display can be rather clumsy and difficult to configure and manage to the many operators and products. The DS process shall invest in collectively automating the sharing of images while focusing on such characteristics as; managing bandwidth, encrypting security measures, synchronizing disconnections from loss of signal / loss of acquisitions, performance latency, and provide functions like, scalability, multi-sharing, ease of initial integration / sustained configuration, integration with video adjustments packages, collaborative tools, host / recipient controllability, and the utmost paramount priority, an enterprise solution that provides ownership to the whole

Measuring patient-centered medical home access and continuity in clinics with part-time clinicians.

Science.gov (United States)

Rosland, Ann-Marie; Krein, Sarah L; Kim, Hyunglin Myra; Greenstone, Clinton L; Tremblay, Adam; Ratz, David; Saffar, Darcy; Kerr, Eve A

2015-05-01

Common patient-centered medical home (PCMH) performance measures value access to a single primary care provider (PCP), which may have unintended consequences for clinics that rely on part-time PCPs and team-based care. Retrospective analysis of 110,454 primary care visits from 2 Veterans Health Administration clinics from 2010 to 2012. Multi-level models examined associations between PCP availability in clinic, and performance on access and continuity measures. Patient experiences with access and continuity were compared using 2012 patient survey data (N = 2881). Patients of PCPs with fewer half-day clinic sessions per week were significantly less likely to get a requested same-day appointment with their usual PCP (predicted probability 17% for PCPs with 2 sessions/week, 20% for 5 sessions/week, and 26% for 10 sessions/week). Among requests that did not result in a same-day appointment with the usual PCP, there were no significant differences in same-day access to a different PCP, or access within 2 to 7 days with patients' usual PCP. Overall, patients had >92% continuity with their usual PCP at the hospital-based site regardless of PCP sessions/week. Patients of full-time PCPs reported timely appointments for urgent needs more often than patients of part-time PCPs (82% vs 71%; P Part-time PCP performance appeared worse when using measures focused on same-day access to patients' usual PCP. However, clinic-level same-day access, same-week access to the usual PCP, and overall continuity were similar for patients of part-time and full-time PCPs. Measures of in-person access to a usual PCP do not capture alternate access approaches encouraged by PCMH, and often used by part-time providers, such as team-based or non-face-to-face care.

Space Flight Operations Center local area network

Science.gov (United States)

Goodman, Ross V.

1988-01-01

The existing Mission Control and Computer Center at JPL will be replaced by the Space Flight Operations Center (SFOC). One part of the SFOC is the LAN-based distribution system. The purpose of the LAN is to distribute the processed data among the various elements of the SFOC. The SFOC LAN will provide a robust subsystem that will support the Magellan launch configuration and future project adaptation. Its capabilities include (1) a proven cable medium as the backbone for the entire network; (2) hardware components that are reliable, varied, and follow OSI standards; (3) accurate and detailed documentation for fault isolation and future expansion; and (4) proven monitoring and maintenance tools.

Electronic structure of deep impurity centers in silicon

International Nuclear Information System (INIS)

Oosten, A.B. van.

1989-01-01

This thesis reports an experimental study of deep level impurity centers in silicon, with much attention for theoretical interpretation of the data. A detailed picture of the electronic structure of several centers was obtained by magnetic resonance techniques, such as electron paramagnetic resonance (EPR), electron-nuclear double resonance (ENDOR) and field scanned ENDOR (FSE). The thesis consists of two parts. The first part deals with chalcogen (sulfur, selenium and tellurium) related impurities, which are mostly double donors. The second part is about late transition metal (nickel, palladium and platinum) impurities, which are single (Pd,Pt) or double (Ni) acceptor centers. (author). 155 refs.; 51 figs.; 23 tabs

Assessment of operators' mental workload using physiological and subjective measures in cement, city traffic and power plant control centers.

Science.gov (United States)

Fallahi, Majid; Motamedzade, Majid; Heidarimoghadam, Rashid; Soltanian, Ali Reza; Miyake, Shinji

2016-01-01

The present study aimed to evaluate the operators' mental workload (MW) of cement, city traffic control and power plant control centers using subjective and objective measures during system vital parameters monitoring. This cross-sectional study was conducted from June 2014 to February 2015 at the cement, city traffic control and power plant control centers. Electrocardiography and electroencephalography data were recorded from forty males during performing their daily working in resting, low mental workload (LMW), high mental workload (HMW) and recovery conditions (each block 5 minutes). The NASA-Task Load Index (TLX) was used to evaluate the subjective workload of the operators. The results showed that increasing MW had a significant effect on the operators subjective responses in two conditions ([1,53] = 216.303, P < 0.001, η2 = 0.803). Also,the Task-MW interaction effect on operators subjective responses was significant (F [3, 53] = 12.628,P < 0.001, η2 = 0.417). Analysis of repeated measures analysis of variance (ANOVA) indicated that increasing mental demands had a significant effect on heart rate, low frequency/high frequency ratio, theta and alpha band activity. The results suggested that when operators' mental demands especially in traffic control and power plant tasks increased, their mental fatigue and stress level increased and their mental health deteriorated. Therefore, it may be necessary to implement an ergonomic program or administrative control to manage mental probably health in these control centers. Furthermore, by evaluating MW, the control center director can organize the human resources for each MW condition to sustain the appropriate performance as well as improve system functions.

Joint Center Estimation Using Single-Frame Optimization: Part 1: Numerical Simulation.

Science.gov (United States)

Frick, Eric; Rahmatalla, Salam

2018-04-04

The biomechanical models used to refine and stabilize motion capture processes are almost invariably driven by joint center estimates, and any errors in joint center calculation carry over and can be compounded when calculating joint kinematics. Unfortunately, accurate determination of joint centers is a complex task, primarily due to measurements being contaminated by soft-tissue artifact (STA). This paper proposes a novel approach to joint center estimation implemented via sequential application of single-frame optimization (SFO). First, the method minimizes the variance of individual time frames’ joint center estimations via the developed variance minimization method to obtain accurate overall initial conditions. These initial conditions are used to stabilize an optimization-based linearization of human motion that determines a time-varying joint center estimation. In this manner, the complex and nonlinear behavior of human motion contaminated by STA can be captured as a continuous series of unique rigid-body realizations without requiring a complex analytical model to describe the behavior of STA. This article intends to offer proof of concept, and the presented method must be further developed before it can be reasonably applied to human motion. Numerical simulations were introduced to verify and substantiate the efficacy of the proposed methodology. When directly compared with a state-of-the-art inertial method, SFO reduced the error due to soft-tissue artifact in all cases by more than 45%. Instead of producing a single vector value to describe the joint center location during a motion capture trial as existing methods often do, the proposed method produced time-varying solutions that were highly correlated ( r > 0.82) with the true, time-varying joint center solution.

Joint Center Estimation Using Single-Frame Optimization: Part 1: Numerical Simulation

Directory of Open Access Journals (Sweden)

Eric Frick

2018-04-01

Full Text Available The biomechanical models used to refine and stabilize motion capture processes are almost invariably driven by joint center estimates, and any errors in joint center calculation carry over and can be compounded when calculating joint kinematics. Unfortunately, accurate determination of joint centers is a complex task, primarily due to measurements being contaminated by soft-tissue artifact (STA. This paper proposes a novel approach to joint center estimation implemented via sequential application of single-frame optimization (SFO. First, the method minimizes the variance of individual time frames’ joint center estimations via the developed variance minimization method to obtain accurate overall initial conditions. These initial conditions are used to stabilize an optimization-based linearization of human motion that determines a time-varying joint center estimation. In this manner, the complex and nonlinear behavior of human motion contaminated by STA can be captured as a continuous series of unique rigid-body realizations without requiring a complex analytical model to describe the behavior of STA. This article intends to offer proof of concept, and the presented method must be further developed before it can be reasonably applied to human motion. Numerical simulations were introduced to verify and substantiate the efficacy of the proposed methodology. When directly compared with a state-of-the-art inertial method, SFO reduced the error due to soft-tissue artifact in all cases by more than 45%. Instead of producing a single vector value to describe the joint center location during a motion capture trial as existing methods often do, the proposed method produced time-varying solutions that were highly correlated (r > 0.82 with the true, time-varying joint center solution.

Controlled Nonlinear Stochastic Delay Equations: Part II: Approximations and Pipe-Flow Representations

International Nuclear Information System (INIS)

Kushner, Harold J.

2012-01-01

This is the second part of a work dealing with key issues that have not been addressed in the modeling and numerical optimization of nonlinear stochastic delay systems. We consider new classes of models, such as those with nonlinear functions of several controls (such as products), each with is own delay, controlled random Poisson measure driving terms, admissions control with delayed retrials, and others. Part I was concerned with issues concerning the class of admissible controls and their approximations, since the classical definitions are inadequate for our models. This part is concerned with transportation equation representations and their approximations. Such representations of nonlinear stochastic delay models have been crucial in the development of numerical algorithms with much reduced memory and computational requirements. The representations for the new models are not obvious and are developed. They also provide a template for the adaptation of the Markov chain approximation numerical methods.

Control of the motion of the body's center of mass in relation to the center of pressure during high-heeled gait.

Science.gov (United States)

Chien, Hui-Lien; Lu, Tung-Wu; Liu, Ming-Wei

2013-07-01

High-heeled shoes are associated with instability and falling, leading to injuries such as fracture and ankle sprain. Knowledge of the motion of the body's center of mass (COM) with respect to the center of pressure (COP) during high-heeled gait may offer insights into the balance control strategies and provide a basis for approaches that minimize the risk of falling and associated adverse effects. The study aimed to investigate the influence of the base and height of the heels on the COM motion in terms of COM-COP inclination angles (IA) and the rate of change of IA (RCIA). Fifteen females who regularly wear high heels walked barefoot and with narrow-heeled shoes with three heel heights (3.9cm, 6.3cm and 7.3cm) while kinematic and ground reaction force data were measured and used to calculate the COM and COP, as well as the temporal-distance parameters. The reduced base of the heels was found to be the primary factor for the reduced normalized walking speed and the reduced frontal IA throughout the gait cycle. This was achieved mainly through the control of the RCIA during double-leg stance (DLS). The heel heights affected mainly the peak RCIA during DLS, which were not big enough to affect the IA. These results suggest young adults adopt a conservative strategy for balance control during narrow-heeled gait. The results will serve as baseline data for future evaluation of patients and/or older adults during narrow-heeled gait with the aim of reducing the risk of falling. Copyright © 2012 Elsevier B.V. All rights reserved.

Calls to Florida Poison Control Centers about mercury: Trends over 2003-2013.

Science.gov (United States)

Gribble, Matthew O; Deshpande, Aniruddha; Stephan, Wendy B; Hunter, Candis M; Weisman, Richard S

2017-11-01

The aim of this analysis was to contrast trends in exposure-report calls and informational queries (a measure of public interest) about mercury to the Florida Poison Control Centers over 2003-2013. Poison-control specialists coded calls to Florida Poison Control Centers by substance of concern, caller demographics, and whether the call pertained to an exposure event or was an informational query. For the present study, call records regarding mercury were de-identified and provided along with daily total number of calls for statistical analysis. We fit Poisson models using generalized estimating equations to summarize changes across years in counts of daily calls to Florida Poison Control Centers, adjusting for month. In a second stage of analysis, we further adjusted for the total number of calls each day. We also conducted analyses stratified by age of the exposed. There was an overall decrease over 2003-2013 in the number of total calls about mercury [Ratio per year: 0.89, 95% CI: (0.88, 0.90)], and calls about mercury exposure [Ratio per year: 0.84, 95% CI: (0.83, 0.85)], but the number of informational queries about mercury increased over this time [Ratio per year: 1.15 (95% CI: 1.12, 1.18)]. After adjusting for the number of calls of that type each day (e.g., call volume), the associations remained similar: a ratio of 0.88 (95% CI: 0.87, 0.89) per year for total calls, 0.85 (0.83, 0.86) for exposure-related calls, and 1.17 (1.14, 1.21) for informational queries. Although, the number of exposure-related calls decreased, informational queries increased over 2003-2013. This might suggest an increased public interest in mercury health risks despite a decrease in reported exposures over this time period. Copyright © 2017 Elsevier Inc. All rights reserved.

A decade of building massage therapy services at an academic medical center as part of a healing enhancement program.

Science.gov (United States)

Rodgers, Nancy J; Cutshall, Susanne M; Dion, Liza J; Dreyer, Nikol E; Hauschulz, Jennifer L; Ristau, Crystal R; Thomley, Barb S; Bauer, Brent A

2015-02-01

The use of complementary and integrative medicine therapies is steadily becoming an integral part of health care. Massage therapy is increasingly offered to hospitalized patients for various conditions to assist with the management of common symptoms such as pain, anxiety, and tension. This article summarizes a decade of building the massage therapy service at a large tertiary care medical center, from the early pilot studies and research to the current program offerings, and the hopes and dreams for the future. Copyright © 2014 Elsevier Ltd. All rights reserved.

Model Development for Auto Spare Parts Inventory Control and ...

African Journals Online (AJOL)

2012-12-01

Dec 1, 2012 ... essential motivating factors for providing control in manufacturing companies has never showed any sign ... The management of these parts can only be done with the aid of a computer; ... perform a discrete event simulation of.

IEEE Std 649-1991: IEEE standard for qualifying Class 1E motor control centers for nuclear power generating stations

International Nuclear Information System (INIS)

Anon.

1993-01-01

The basic principles, requirements, and methods for qualifying Class 1E motor control centers for both harsh and mild environment applications in nuclear power generating stations are described. In addition to defining specific qualification requirements for Class 1E motor control centers and their components in accordance with the more general qualification requirements of IEEE Std 323-1983, this standard is intended to provide guidance in establishing a qualification program for demonstrating the adequacy of Class 1E motor control centers in nuclear power generating station applications

Free-Piston Stirling Convertor Controller Development at NASA Glenn Research Center

Science.gov (United States)

Regan, Timothy

2004-01-01

The free-piston Stirling convertor end-to-end modeling effort at NASA Glenn Research Center (GRC) has produced a software-based test bed in which free-piston Stirling convertors can be simulated and evaluated. The simulation model includes all the components of the convertor - the Stirling cycle engine, linear alternator, controller, and load. This paper is concerned with controllers. It discusses three controllers that have been studied using this model. Case motion has been added to the model recently so that effects of differences between convertor components can be simulated and ameliorative control engineering techniques can be developed. One concern when applying a system comprised of interconnected mass-spring-damper components is to prevent operation in any but the intended mode. The design mode is the only desired mode of operation, but all other modes are considered in controller design.

Gravity Plant Physiology Facility (GPPF) Team in the Spacelab Payload Operations Control Center (SL

Science.gov (United States)

1992-01-01

The primary payload for Space Shuttle Mission STS-42, launched January 22, 1992, was the International Microgravity Laboratory-1 (IML-1), a pressurized manned Spacelab module. The goal of IML-1 was to explore in depth the complex effects of weightlessness of living organisms and materials processing. Around-the-clock research was performed on the human nervous system's adaptation to low gravity and effects of microgravity on other life forms such as shrimp eggs, lentil seedlings, fruit fly eggs, and bacteria. Materials processing experiments were also conducted, including crystal growth from a variety of substances such as enzymes, mercury iodide, and a virus. The Huntsville Operations Support Center (HOSC) Spacelab Payload Operations Control Center (SL POCC) at the Marshall Space Flight Center (MSFC) was the air/ground communication channel used between the astronauts and ground control teams during the Spacelab missions. Featured is the Gravity Plant Physiology Facility (GPPF) team in the SL POCC during the IML-1 mission.

Critical Point Facility (CPE) Group in the Spacelab Payload Operations Control Center (SL POCC)

Science.gov (United States)

1992-01-01

The primary payload for Space Shuttle Mission STS-42, launched January 22, 1992, was the International Microgravity Laboratory-1 (IML-1), a pressurized manned Spacelab module. The goal of IML-1 was to explore in depth the complex effects of weightlessness of living organisms and materials processing. Around-the-clock research was performed on the human nervous system's adaptation to low gravity and effects of microgravity on other life forms such as shrimp eggs, lentil seedlings, fruit fly eggs, and bacteria. Materials processing experiments were also conducted, including crystal growth from a variety of substances such as enzymes, mercury iodide, and a virus. The Huntsville Operations Support Center (HOSC) Spacelab Payload Operations Control Center (SL POCC) at the Marshall Space Flight Center (MSFC) was the air/ground communication channel used between the astronauts and ground control teams during the Spacelab missions. Featured is the Critical Point Facility (CPE) group in the SL POCC during STS-42, IML-1 mission.

Assessment of operators’ mental workload using physiological and subjective measures in cement, city traffic and power plant control centers

Science.gov (United States)

Fallahi, Majid; Motamedzade, Majid; Heidarimoghadam, Rashid; Soltanian, Ali Reza; Miyake, Shinji

2016-01-01

Background: The present study aimed to evaluate the operators’ mental workload (MW) of cement, city traffic control and power plant control centers using subjective and objective measures during system vital parameters monitoring. Methods: This cross-sectional study was conducted from June 2014 to February 2015 at the cement, city traffic control and power plant control centers. Electrocardiography and electroencephalography data were recorded from forty males during performing their daily working in resting, low mental workload (LMW), high mental workload (HMW) and recovery conditions (each block 5 minutes). The NASA-Task Load Index (TLX) was used to evaluate the subjective workload of the operators. Results: The results showed that increasing MW had a significant effect on the operators subjective responses in two conditions ([1,53] = 216.303, P < 0.001, η2 = 0.803). Also,the Task-MW interaction effect on operators subjective responses was significant (F [3, 53] = 12.628,P < 0.001, η2 = 0.417). Analysis of repeated measures analysis of variance (ANOVA) indicated that increasing mental demands had a significant effect on heart rate, low frequency/high frequency ratio, theta and alpha band activity. Conclusion: The results suggested that when operators’ mental demands especially in traffic control and power plant tasks increased, their mental fatigue and stress level increased and their mental health deteriorated. Therefore, it may be necessary to implement an ergonomic program or administrative control to manage mental probably health in these control centers. Furthermore, by evaluating MW, the control center director can organize the human resources for each MW condition to sustain the appropriate performance as well as improve system functions. PMID:27386425

NASA Marshall Space Flight Center Controls Systems Design and Analysis Branch

Science.gov (United States)

Gilligan, Eric

2014-01-01

Marshall Space Flight Center maintains a critical national capability in the analysis of launch vehicle flight dynamics and flight certification of GN&C algorithms. MSFC analysts are domain experts in the areas of flexible-body dynamics and control-structure interaction, thrust vector control, sloshing propellant dynamics, and advanced statistical methods. Marshall's modeling and simulation expertise has supported manned spaceflight for over 50 years. Marshall's unparalleled capability in launch vehicle guidance, navigation, and control technology stems from its rich heritage in developing, integrating, and testing launch vehicle GN&C systems dating to the early Mercury-Redstone and Saturn vehicles. The Marshall team is continuously developing novel methods for design, including advanced techniques for large-scale optimization and analysis.

Patient-centered recruitment and retention for a randomized controlled study.

Science.gov (United States)

Chhatre, Sumedha; Jefferson, Ashlie; Cook, Ratna; Meeker, Caitlin R; Kim, Ji Hyun; Hartz, Kayla Marie; Wong, Yu-Ning; Caruso, Adele; Newman, Diane K; Morales, Knashawn H; Jayadevappa, Ravishankar

2018-03-27

Recruitment and retention strategies for patient-centered outcomes research are evolving and research on the subject is limited. In this work, we present a conceptual model of patient-centered recruitment and retention, and describe the recruitment and retention activities and related challenges in a patient-centered comparative effectiveness trial. This is a multicenter, longitudinal randomized controlled trial in localized prostate cancer patients. We recruited 743 participants from three sites over 15 months period (January 2014 to March 2015), and followed them for 24 months. At site 1, of the 773 eligible participants, 551 (72%) were enrolled. At site 2, 34 participants were eligible and 23 (68%) enrolled. Of the 434 eligible participants at site 3, 169 (39%) enrolled. We observed that strategies related to the concepts of trust (e.g., physician involvement, ensuring protection of information), communication (e.g., brochures and pamphlets in physicians' offices, continued contact during regular clinic visits and calling/emailing assessment), attitude (e.g., emphasizing the altruistic value of research, positive attitude of providers and research staff), and expectations (e.g., full disclosure of study requirements and time commitment, update letters) facilitated successful patient recruitment and retention. A stakeholders' advisory board provided important input for the recruitment and retention activities. Active engagement, reminders at the offices, and personalized update letters helped retention during follow-up. Usefulness of telephone recruitment was site specific and, at one site, the time requirement for telephone recruitment was a challenge. We have presented multilevel strategies for successful recruitment and retention in a clinical trial using a patient-centered approach. Our strategies were flexible to accommodate site-level requirements. These strategies as well as the challenges can aid recruitment and retention efforts of future large

Optimization of traffic distribution control in software-configurable infrastructure of virtual data center based on a simulation model

Directory of Open Access Journals (Sweden)

I. P. Bolodurina

2017-01-01

Full Text Available Currently, the proportion of use of cloud computing technology in today's business processes of companies is growing steadily. Despite the fact that it allows you to reduce the cost of ownership and operation of IT infrastructure, there are a number of problems related to the control of data centers. One such problem is the efficiency of the use of available companies compute and network resources. One of the directions of optimization is the process of traffic control of cloud applications and services in data centers. Given the multi-tier architecture of modern data center, this problem does not quite trivial. The advantage of modern virtual infrastructure is the ability to use software-configurable networks and software-configurable data storages. However, existing solutions with algorithmic optimization does not take into account a number of features forming network traffic with multiple classes of applications. Within the framework of the exploration solved the problem of optimizing the distribution of traffic cloud applications and services for the software-controlled virtual data center infrastructure. A simulation model describing the traffic in data center and software-configurable network segments involved in the processing of user requests for applications and services located network environment that includes a heterogeneous cloud platform and software-configurable data storages. The developed model has allowed to implement cloud applications traffic management algorithm and optimize access to the storage system through the effective use of the channel for data transmission. In experimental studies found that the application of the developed algorithm can reduce the response time of cloud applications and services, and as a result improve the performance of processing user requests and to reduce the number of failures.

What do we mean by Human-Centered Design of Life-Critical Systems?

Science.gov (United States)

Boy, Guy A

2012-01-01

Human-centered design is not a new approach to design. Aerospace is a good example of a life-critical systems domain where participatory design was fully integrated, involving experimental test pilots and design engineers as well as many other actors of the aerospace engineering community. This paper provides six topics that are currently part of the requirements of the Ph.D. Program in Human-Centered Design of the Florida Institute of Technology (FIT.) This Human-Centered Design program offers principles, methods and tools that support human-centered sustainable products such as mission or process control environments, cockpits and hospital operating rooms. It supports education and training of design thinkers who are natural leaders, and understand complex relationships among technology, organizations and people. We all need to understand what we want to do with technology, how we should organize ourselves to a better life and finally find out whom we are and have become. Human-centered design is being developed for all these reasons and issues.

Nuclear Energy Center Site Survey, 1975. Part II. The U.S. electric power system and the potential role of nuclear energy centers

International Nuclear Information System (INIS)

1976-01-01

Information related to Nuclear Energy Centers (NEC) in the U.S. is presented concerning the U.S. electric power system today; electricity demand history and forecasts; history and forecasts of the electric utility industry; regional notes; the status, history, and forecasts of the nuclear role; power plant siting problems and practices; nuclear facilities siting problems and practices; origin and evolution of the nuclear energy center concept; conceptualized description of nuclear energy centers; potential role of nuclear energy centers; assumptions, criteria, and bases; typical evolution of a nuclear energy center; and the nuclear fuel cycle

A Comparison of the Views of Internal Controllers/Auditors and Branch/Call Center Personnel of the Banks for Operational Risk: A Case for Turkish Banking Sector

Directory of Open Access Journals (Sweden)

Sinemis Zengin

2016-10-01

Full Text Available The aim of this paper is to compare the views of internal controllers/auditors and branch/call center personnel of the banks with respect to the operational risk. Within this scope, we made two different surveys to the personnel in Turkish banks in order to achieve this objective. The first survey was conducted by 310 branch and call center personnel whereas 151 personnel in internal control and audit departments of the banks carried out the second survey. The major finding in this study is that there is a difference in the views of these two groups regarding the evaluation of operational risk. In general, internal controllers/auditors look at the operational risk more negatively than branch/call center personnel. The personnel who control and audit operations in the bank think that operational risk knowledge level of branch/call center personnel is less sufficient, operational risk levels are higher, the controls to avoid this risk are less efficient than branch/call center personnel consider.

Sentinel-3 Mission Performance Center: paving the way of high-quality controlled data

Science.gov (United States)

Bruniquel, Jerome; Féménias, Pierre; Goryl, Philippe; Bonekamp, Hans

2015-04-01

As part of the Sentinel-3 mission and in order to ensure the highest quality of products, ESA and EUMETSAT set up the Sentinel-3 Mission Performance Centre (S-3 MPC). This facility is part of the Payload Data Ground Segment (PDGS) and aims at controlling the quality of all generated products, from L0 to L2. The S-3 MPC is composed of a Coordinating Centre (CC), where the core infrastructure is hosted, which is in charge of the main routine activities (especially the quality control of data) and the overall service management. Expert Support Laboratories (ESLs) are involved in calibration and validation activities and provide specific assessment of the products (e.g., analysis of trends, ad hoc analysis of anomalies, etc.). The S-3 MPC interacts with the Processing Archiving Centers (PACs) and the marine centre at EUMETSAT. The S-3 MPC service contract is currently carried out by 23-partners consortium led by ACRI-ST, France. The S-3 MPC contract was kick-offed in September 2014 with a first set-up phase of 12 months. After the launch of S3-A (planned before end of 2015), the S-3 MPC will start its second phase to support commissioning activities. Then a routine operation phase of up to 5 years will begin, including the commissioning activities related to S3-B. The main S-3 MPC activities are: - Calibration: to update on-board and on-ground configuration data in order to meet product quality requirements. - Validation: to assess, by independent means with respect to the methods and tools used for calibration, the quality of the generated data products. Validation functions provide feedback to calibration and data processors corrective and perfective maintenance activities. - Verification: to confirm that the specified requirements on a system have been satisfied. - Quality Control: to routinely monitor the status of the sensor and to check if the derived products (Level 0, Level 1 and Level 2) meet the quality requirements along mission lifetime. - Algorithm

75 FR 12769 - National Center for Complementary and Alternative Medicine Announcement of Workshop on Control...

Science.gov (United States)

2010-03-17

... Complementary and Alternative Medicine Announcement of Workshop on Control/Comparison Groups for Trials of Non... Complementary and Alternative Medicine (NCCAM) was established in 1998 with the mission of exploring... Center for Complementary and Alternative Medicine, National Institutes of Health. [FR Doc. 2010-5767...

A Study of Active Rotor-Blade Vibration Control using Electro-Magnetic Actuation - Part II: Experiment

DEFF Research Database (Denmark)

Christensen, Rene Hardam; Santos, Ilmar

2004-01-01

. The remaining two sets of actuators are applied to act directly onto the hub, working as an active radial bearing controlling the rotor lateral movement. The rig is equipped with sensors measuring blade and rotor vibrations. Actuators and sensors are connected to a digital signal processor running the control......This is the second paper in a two-part study on active rotor-blade vibration control. This part presents an experimental contribution into the work of active controller design for rotor-blade systems. The primary aim is to give an experimental validation and show the applicability...... algorithm. Measurement signals and actuator control signals from the sensors and actuators fixed in the rotating disc are transmitted to the control unit through a slip-ring device. Various measured responses of both the controlled and the non-controlled system with identical blades and with deliberately...

[Displacement of the posterior part of the eyeball in myopia].

Science.gov (United States)

Akizawa, Yasuko; Masahiro, Ida

2006-12-01

The principal aim of this study was to investigate displacement of the posterior part of the eyeball within the muscle cone in myopic eyes, particularly in moderately myopic subjects as well as in high myopes. Secondly, the correlation of the amount of displacement and the outer axial length of the globe was studied. The direction of displacement was also examined to clarify whether the eyeball tends to shift toward a certain direction. Seven patients with moderate myopia (moderate myopia group), fifteen patients with high myopia without esotropia (high myopia group), five patients with high myopia and esotropia (myopic esotropia group), and twenty-two controls (control group) were examined. Using magnetic resonance imaging, the outer axial length and the displacement of the posterior portion of the eyeball in the muscle cone were measured. In order to eliminate interindividual differences in the facial configuration, the coronal scanning was done perpendicularly to the orbital axis. The displacement was measured in a plane 4 mm anterior to the globe-optic nerve junction. The displacement was represented by the distance and direction of the globe center from the center of the muscle cone. In the moderate myopia group, there was no displacement of the posterior part of the eyeball in the muscle cone. It was the same as in the control group. But among the three groups, the displacement (mean standard deviation) was significantly greater in the myopic esotropia group (1.53 +/- 0.49 mm) and the high myopia group (0.94 +/- 0.52 mm) than in the control group (0.11 +/- 0.18 mm) (one way ANOVA and multiple comparison). The outer axial length and the distance of the displacement in all cases was significantly correlated (r = 0.87, p = 0.01). Moreover, the posterior part of the eyeball of the myopic esotropia group and the high myopia group was displaced superiorly and temporally. The posterior part of the eyeball of myopic eyes was displaced superotemporally in the muscle

Comparison of quality control for trauma management between Western and Eastern European trauma center

Directory of Open Access Journals (Sweden)

Gambale Giorgio

2008-11-01

Full Text Available Abstract Background Quality control of trauma care is essential to define the effectiveness of trauma center and trauma system. To identify the troublesome issues of the system is the first step for validation of the focused customized solutions. This is a comparative study of two level I trauma centers in Italy and Romania and it has been designed to give an overview of the entire trauma care program adopted in these two countries. This study was aimed to use the results as the basis for recommending and planning changes in the two trauma systems for a better trauma care. Methods We retrospectively reviewed a total of 182 major trauma patients treated in the two hospitals included in the study, between January and June 2002. Every case was analyzed according to the recommended minimal audit filters for trauma quality assurance by The American College of Surgeons Committee on Trauma (ACSCOT. Results Satisfactory yields have been reached in both centers for the management of head and abdominal trauma, airway management, Emergency Department length of stay and early diagnosis and treatment. The main significant differences between the two centers were in the patients' transfers, the leadership of trauma team and the patients' outcome. The main concerns have been in the surgical treatment of fractures, the outcome and the lacking of documentation. Conclusion The analyzed hospitals are classified as Level I trauma center and are within the group of the highest quality level centers in their own countries. Nevertheless, both of them experience major lacks and for few audit filters do not reach the mmum standard requirements of ACS Audit Filters. The differences between the western and the eastern European center were slight. The parameters not reaching the minimum requirements are probably occurring even more often in suburban settings.

Ayahuasca Exposure: Descriptive Analysis of Calls to US Poison Control Centers from 2005 to 2015.

Science.gov (United States)

Heise, C William; Brooks, Daniel E

2017-09-01

Ayahuasca is a hallucinogenic plant preparation which usually contains the vine Banisteriopsis caapi and the shrub Psychotria viridis. This tea originates from the Amazon Basin where it is used in religious ceremonies. Because interest in these religious groups spreading as well as awareness of use of ayahuasca for therapeutic and recreational purposes, its use is increasing. Banisteriopsis caapi is rich in β-carbolines, especially harmine, tetrahydroharmine and harmaline, which have monoamine oxidase inhibiting (MAOI) activity. Psychotria viridis contains the 5HT2A/2C/1A receptor agonist hallucinogen N,N-dimethyltryptamine (DMT). Usual desired effects include hallucination, dissociation, mood alteration and perception change. Undesired findings previously reported are nausea, vomiting, hypertension, and tachycardia. All human exposure calls reported to the American Association of Poison Controls Centers' (AAPCC) National Poison Data System (NPDS) between September 1, 2005 and September 1, 2015 were reviewed. Cases were filtered for specific plant derived ayahuasca-related product codes. Abstracted data included the following: case age and gender, exposure reason, exposure route, clinical manifestations, treatments given, medical outcomes and fatality. Five hundred and thirty-eight exposures to ayahuasca botanical products were reported. The majority of the calls to poison control centers came from healthcare facilities (83%). The most common route of exposure was ingestion. Most cases were men (437, 81%, 95% CI 77.7% - 84.3%). The median age was 21 (IQR 18-29). Most exposures were acute. Three hundred thirty-seven (63%) were reported to have a major or moderate clinical effect. The most common clinical manifestations reported were hallucinations (35%), tachycardia (34%), agitation (34%), hypertension (16%), mydriasis (13%) and vomiting (6%). Benzodiazepines were commonly given (30%). There were 28 cases in the series who required endotracheal intubation (5

Operator-centered control of a semi-autonomous industrial robot

International Nuclear Information System (INIS)

Spelt, P.F.; Jones, S.L.

1994-01-01

This paper presents work done by Oak Ridge National Laboratory and Remotec, Inc., to develop a new operator-centered control system for Remotec's Andros telerobot. Andros robots are presently used by numerous electric utilities, the armed forces, and numerous law enforcement agencies to perform tasks which are hazardous for human operators. This project has automated task components and enhanced the video graphics display of the robot's position in the environment to significantly reduce operator workload. The procedure of automating a telerobot requires the addition of computer power to the robot, along with a variety of sensors and encoders to provide information about the robots performance in and relationship to its environment The resulting vehicle serves as a platform for research on strategies to integrate automated tasks with those performed by a human operator. The addition of these capabilities will greatly enhance the safety and efficiency of performance in hazardous environments

Report on the Audit of the Acquisition of the Tactical Air Operations Center/Modular Control Equipment

Science.gov (United States)

1991-06-06

This is our final report on the Audit of the Acquisition of the Tactical Air Operations Center/Modular Control Equipment (TAOC/MCE) for your...matters of concern that could affect the acquisition of the TAOC/MCE. We performed the audit from March through December 1990. The audit objective was...controls related to the audit objectives. The audit was made in accordance with the Inspector General’s critical program management element approach

Graphical user interfaces for McClellan Nuclear Radiation Center

International Nuclear Information System (INIS)

Brown-VanHoozer, S.A.; Power, M.; Forsmann, H.

1998-01-01

The control console of the TRIGA reactor at McClellan's Nuclear Radiation Center (MNRC) is in the process of being replaced because of spurious scrams, outdated software, and obsolete parts. The intent of the new control console is to eliminate the existing problems by installing a UNIX-based computer system with industry-standard interface software and by incorporating human factors during all stages of the graphical user interface (GUI) development and control console design. This paper gives a brief description of some of the guidelines used in developing the MNRC's GUIs as continuous, real-time displays

Global financial centers: shifting power balance

NARCIS (Netherlands)

Aalbers, M.B.

2009-01-01

London and New York are the most important global financial centers in the world. Tokyo used to be considered the third global financial center, but has lost its position in the last 20 years, partly as a result of a sustained recession and partly because both Japanese society and Japanese economy

Mathematical model for adaptive control system of ASEA robot at Kennedy Space Center

Science.gov (United States)

Zia, Omar

1989-01-01

The dynamic properties and the mathematical model for the adaptive control of the robotic system presently under investigation at Robotic Application and Development Laboratory at Kennedy Space Center are discussed. NASA is currently investigating the use of robotic manipulators for mating and demating of fuel lines to the Space Shuttle Vehicle prior to launch. The Robotic system used as a testbed for this purpose is an ASEA IRB-90 industrial robot with adaptive control capabilities. The system was tested and it's performance with respect to stability was improved by using an analogue force controller. The objective of this research project is to determine the mathematical model of the system operating under force feedback control with varying dynamic internal perturbation in order to provide continuous stable operation under variable load conditions. A series of lumped parameter models are developed. The models include some effects of robot structural dynamics, sensor compliance, and workpiece dynamics.

Trust Control of VTOL Aircraft Part Deux

Science.gov (United States)

Dugan, Daniel C.

2014-01-01

Thrust control of Vertical Takeoff and Landing (VTOL) aircraft has always been a debatable issue. In most cases, it comes down to the fundamental question of throttle versus collective. Some aircraft used throttle(s), with a fore and aft longitudinal motion, some had collectives, some have used Thrust Levers where the protocol is still "Up is Up and Down is Down," and some have incorporated both throttles and collectives when designers did not want to deal with the Human Factors issues. There have even been combinations of throttles that incorporated an arc that have been met with varying degrees of success. A previous review was made of nineteen designs without attempting to judge the merits of the controller. Included in this paper are twelve designs entered in competition for the 1961 Tri-Service VTOL transport. Entries were from a Bell/Lockheed tiltduct, a North American tiltwing, a Vanguard liftfan, and even a Sikorsky tiltwing. Additional designs were submitted from Boeing Wichita (direct lift), Ling-Temco-Vought with its XC-142 tiltwing, Boeing Vertol's tiltwing, Mcdonnell's compound and tiltwing, and the Douglas turboduct and turboprop designs. A private party submitted a re-design of the Breguet 941 as a VTOL transport. It is important to document these 53 year-old designs to preserve a part of this country's aviation heritage.

Completion of the fabrication and assembly of the internal parts and pressure vessel of the LABGENE reactor

International Nuclear Information System (INIS)

Guimaraes, Leonam dos Santos

2005-01-01

The Navy's Technological Center in Sao Paulo (CTMSP) has successfully concluded in 2005 the final assembly of the internals of the Laboratory of Energy Generation's Reactor (LABGENE). This structure together with the fuel elements and the control rods drives mechanisms are part of a PWR type Nuclear Reactor. (author)

Test bed control center design concept for Tank Waste Retrieval Manipulator Systems

International Nuclear Information System (INIS)

Sundstrom, E.; Draper, J.V.; Fausz, A.

1995-01-01

This paper describes the design concept for the control center for the Single Shell Tank Waste Retrieval Manipulator System test bed and the design process behind the concept. The design concept supports all phases of the test bed mission, including technology demonstration, comprehensive system testing, and comparative evaluation for further development and refinement of the TWRMS for field operations

Re-Engineering the ISS Payload Operations Control Center During Increased Utilization and Critical Onboard Events

Science.gov (United States)

Dudley, Stephanie R. B.; Marsh, Angela L.

2014-01-01

With an increase in utilization and hours of payload operations being executed onboard the International Space Station (ISS), upgrading the NASA Marshall Space Flight Center (MSFC) Huntsville Operations Support Center (HOSC) ISS Payload Control Area (PCA) was essential to gaining efficiencies and assurance of current and future payload health and science return. PCA houses the Payload Operations Integration Center (POIC) responsible for the execution of all NASA payloads onboard the ISS. POIC Flight Controllers are responsible for the operation of voice, stowage, command, telemetry, video, power, thermal, and environmental control in support of ISS science experiments. The methodologies and execution of the PCA refurbishment were planned and performed within a four-month period in order to assure uninterrupted operation of ISS payloads and minimal impacts to payload operations teams. To vacate the PCA, three additional HOSC control rooms were reconfigured to handle ISS real-time operations, Backup Control Center (BCC) to Mission Control in Houston, simulations, and testing functions. This involved coordination and cooperation from teams of ISS operations controllers, multiple engineering and design disciplines, management, and construction companies performing an array of activities simultaneously and in sync delivering a final product with no issues that impacted the schedule. For each console operator discipline, studies of Information Technology (IT) tools and equipment layouts, ergonomics, and lines of sight were performed. Infusing some of the latest IT into the project was an essential goal in ensuring future growth and success of the ISS payload science returns. Engineering evaluations led to a state of the art Video Wall implementation and more efficient ethernet cabling distribution providing the latest products and the best solution for the POIC. These engineering innovations led to cost savings for the project. Constraints involved in the management of

The Universe Observing Center a modern center to teach and communicate astronomy

Science.gov (United States)

Ribas, Salvador J.

2011-06-01

The Universe Observing Center is one of the parts of the Parc Astronòmic Montsec (PAM). PAM is an initiative of the Catalan government, through the Consorci del Montsec (Montsec Consortium), to take advantage of the capabilities and potential of the Montsec region to develop scientific research, training and outreach activities, particularly in the field of Astronomy. The choice of the Montsec mountains to install the PAM was motivated by the magnificent conditions for observing the sky at night; the sky above Montsec is the best (natural sky free of light pollution) in Catalonia for astronomical observations. The PAM has two main parts: the Observatori Astronòmic del Montsec (OAdM) and the Universe Observing Center (COU). The OAdM is a professional observatory with an 80-cm catadioptric telescope (Joan Oró Telescope). This telescope is a robotic telescope that can be controlled from anywhere in the world via the Internet. The COU is a large multipurpose center which is intended to become an educational benchmark for teaching and communicate astronomy and other sciences in Catalonia. The management of the COU has three main goals: 1) Teach primary and secondary school students in our Educational Training Camp. 2) Teach university students housing the practical astronomy lectures of the universities. 3) Communicate astronomy to the general public. The COU comprises special areas for these purposes: the Telescopes Park with more than 20 telescopes, a coelostat for solar observations and two dome containing full-automated telescopes. The most special equipment is ``The Eye of Montsec'', with its 12m dome containing a multimedia digital planetarium and a platform for direct observation of the sky and the environment. During 2009 we expect around 10000 visitors in Montsec area to enjoy science with Montsec dark skies and an special natural environment.

ASTEC and MODEL: Controls software development at Goddard Space Flight Center

Science.gov (United States)

Downing, John P.; Bauer, Frank H.; Surber, Jeffrey L.

1993-01-01

The ASTEC (Analysis and Simulation Tools for Engineering Controls) software is under development at the Goddard Space Flight Center (GSFC). The design goal is to provide a wide selection of controls analysis tools at the personal computer level, as well as the capability to upload compute-intensive jobs to a mainframe or supercomputer. In the last three years the ASTEC (Analysis and Simulation Tools for Engineering Controls) software has been under development. ASTEC is meant to be an integrated collection of controls analysis tools for use at the desktop level. MODEL (Multi-Optimal Differential Equation Language) is a translator that converts programs written in the MODEL language to FORTRAN. An upgraded version of the MODEL program will be merged into ASTEC. MODEL has not been modified since 1981 and has not kept with changes in computers or user interface techniques. This paper describes the changes made to MODEL in order to make it useful in the 90's and how it relates to ASTEC.

Italy INAF Data Center Report

Science.gov (United States)

Negusini, M.; Sarti, P.

2013-01-01

This report summarizes the activities of the Italian INAF VLBI Data Center. Our Data Center is located in Bologna, Italy and belongs to the Institute of Radioastronomy, which is part of the National Institute of Astrophysics.

78 FR 64505 - Board of Scientific Counselors, National Center for Injury Prevention and Control, (BSC, NCIPC)

Science.gov (United States)

2013-10-29

... Scientific Counselors, National Center for Injury Prevention and Control, (BSC, NCIPC) In accordance with... reviews progress toward injury prevention goals and provides evidence in injury prevention- related... matters, including the: (1) Review of extramural research concepts for funding opportunity announcements...

In-Plane Shielding for CT: Effect of Off-Centering, Automatic Exposure Control and Shield-to-Surface Distance

Energy Technology Data Exchange (ETDEWEB)

Kalra, Mannudeep K.; Dang, Pragya; Singh, Sarabjeet; Saini, Sanjay; Shepard, Jo Anne O. [Massachusetts General Hospital, Boston (United States)

2009-04-15

To assess effects of off-centering, automatic exposure control, and padding on attenuation values, noise, and radiation dose when using in-plane bismuth-based shields for CT scanning. A 30 cm anthropomorphic chest phantom was scanned on a 64-multidetector CT, with the center of the phantom aligned to the gantry isocenter. Scanning was repeated after placing a bismuth breast shield on the anterior surface with no gap and with 1, 2, and 6 cm of padding between the shield and the phantom surface. The 'shielded' phantom was also scanned with combined modulation and off-centering of the phantom at 2 cm, 4 cm and 6 cm below the gantry isocenter. CT numbers, noise, and surface radiation dose were measured. The data were analyzed using an analysis of variance. The in-plane shield was not associated with any significant increment for the surface dose or CT dose index volume, which was achieved by comparing the radiation dose measured by combined modulation technique to the fixed mAs (p > 0.05). Irrespective of the gap or the surface CT numbers, surface noise increased to a larger extent compared to Hounsfield unit (HU) (0-6 cm, 26-55%) and noise (0-6 cm, 30-40%) in the center. With off-centering, in-plane shielding devices are associated with less dose savings, although dose reduction was still higher than in the absence of shielding (0 cm off-center, 90% dose reduction; 2 cm, 61%) (p < 0.0001). Streak artifacts were noted at 0 cm and 1 cm gaps but not at 2 cm and 6 cm gaps of shielding to the surface distances. In-plane shields are associated with greater image noise, artificially increased attenuation values, and streak artifacts. However, shields reduce radiation dose regardless of the extent of off-centering. Automatic exposure control did not increase radiation dose when using a shield.

Relating calls to US poison centers for potential exposures to medications to Centers for Disease Control and Prevention reporting of influenza-like illness.

Science.gov (United States)

Beauchamp, Gillian A; McKeown, Nathanael J; Rodriguez, Sergio; Spyker, Daniel A

2016-03-01

The Centers for Disease Control (CDC) monitors influenza like illness (ILI) and the National Poison Data System (NPDS) warehouses call data uploaded by US poison centers regarding reported exposures to medication. We examined the relationship between calls to poison centers regarding reported exposures to medications commonly used to treat ILI and weekly reports of ILI. The CDC reports ILI, by age group, for each of 10 Health and Human Services (HHS) regions. We examined NPDS summary data from calls reported to poison centers regarding reported exposures to acetaminophen, cough/cold medications, and promethazine, for the same weeks, age groups, and HHS regions for influenza seasons 2000-2013. ILI and NPDS exposures were examined using graphical plots, descriptive statistics, stepwise regression analysis, and Geographic Information Systems (GIS). About 5,101,841 influenza-like illness cases were reported to the CDC, and 2,122,940 calls regarding reported exposures to medications commonly used to treat ILI, were reported by poison centers to the NPDS over the 13 flu seasons. Analysis of stepwise models of the linear untransformed data involving 24 NPDS data groups and for 60 ILI measures, over the 13 influenza seasons, demonstrated that reported exposures to medications used to treat ILI correlated with reported cases of ILI with a median R(2 )=( )0.489 (min R(2 )=( )0.248, max R(2 )=( )0.717), with mean ± SD of R(2 )=( )0.494 ± 0.121. Median number of parameters used (degrees of freedom - 1) was 7. NPDS data regarding poison center calls for selected ILI medication exposures were highly correlated with CDC ILI data. Since NPDS data are available in real time, it provides complimentary ILI monitoring. This approach may provide public health value in predicting other illnesses which are not currently as thoroughly monitored.

Using Web 2.0 (and Beyond?) in Space Flight Operations Control Centers

Science.gov (United States)

Scott, David W.

2010-01-01

Word processing was one of the earliest uses for small workstations, but we quickly learned that desktop computers were far more than e-typewriters. Similarly, "Web 2.0" capabilities, particularly advanced search engines, chats, wikis, blogs, social networking, and the like, offer tools that could significantly improve our efficiency at managing the avalanche of information and decisions needed to operate space vehicles in realtime. However, could does not necessarily equal should. We must wield two-edged swords carefully to avoid stabbing ourselves. This paper examines some Web 2.0 tools, with an emphasis on social media, and suggests which ones might be useful or harmful in real-time space operations co rnotl environments, based on the author s experience as a Payload Crew Communicator (PAYCOM) at Marshall Space Flight Center s (MSFC) Payload Operations Integration Center (POIC) for the International Space Station (ISS) and on discussions with other space flight operations control organizations and centers. There is also some discussion of an offering or two that may come from beyond the current cyber-horizon.

Environmental control and life support testing at the Marshall Space Flight Center

Science.gov (United States)

Schunk, Richard G.; Humphries, William R.

1987-01-01

The Space Station Environmental Control and Life Support System (ECLSS) test program at the Marshall Space Flight Center (MSFC) is addressed. The immediate goals and current activities of the test program are discussed. Also described are the Core Module Integration Facility (CMIF) and the initial ECLSS test configuration. Future plans for the ECLSS test program and the CMIF are summarized.

Preliminary study of S-CO{sub 2} cycle control logic for part load operation

Energy Technology Data Exchange (ETDEWEB)

Ahn, Yoonhan; Lee, Jeong Ik [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of)

2016-05-15

The benefits of S-CO{sub 2} cycle are relatively high efficiency under the mild turbine inlet temperature region, simple layout configuration and small foot-print. In addition, the safety of the SFR system can be inherently enhanced as the violent sodium-water reaction can be substituted with the mild sodium-CO{sub 2} reaction. 75MWe S-CO{sub 2} recompression cycle with radial type turbomachineries and PCHE was designed. Under various part load conditions (30-100% thermal load), off-design performance of the designed system was assessed, and different control logics were first tested. It was identified that the inventory control strategy is the most efficient logic for the part load operation. In the system operation, the compressor surge condition is seriously considered and controlled to avoid the system damage.

The efficacy of incentives to motivate continued fitness-center attendance in college first-year students: a randomized controlled trial.

Science.gov (United States)

Pope, Lizzy; Harvey, Jean

2014-01-01

To determine whether fitness-center attendance established with the provision of weekly monetary incentives persisted after the discontinuation, or decreased frequency, of incentives. One hundred seventeen first-year college students participated during the 2011-2012 academic year. A randomized controlled trial with control, discontinued-incentive, and continued-incentive conditions was conducted. During fall semester, students in incentive conditions received weekly monetary payments for meeting fitness-center attendance goals. During spring semester, discontinued-incentive condition participants no longer received incentives, whereas continued-incentive condition participants received payments on a variable-interval schedule. ID-card attendance records tracked fitness-center attendance. Goal completion decreased from 63% in the incentive groups during the fall semester to 3% in the discontinued-incentive condition, and 39% in the continued-incentive condition during the spring semester. There was not a significant interaction between condition and body mass index change, F(6, 332) = 0.67, p = .68. Incentive discontinuation resulted in students no longer meeting fitness-center attendance goals. A variable-interval reward schedule better maintained attendance.

Real Time Part Input Control of a Pull Production System by Finding IF-THEN Rules

Science.gov (United States)

Ramli, Rizauddin; Yamamoto, Hidehiko; Abu Qudeiri, Jaber

This paper considers the part input problem of a production system where two Flexible Transfer Lines (FTLs) consisting of an up-stream production line and a down-stream production line while operating under Just In Time (JIT) production management. The up-stream production line processes the raw material after receiving them from suppliers, and after processing them, delivers the processed product to a down-stream production line via a conveyer. In this paper, we have proposed a novel idea for a part input real time control system, known as Algorithm for Real Time Control of Part Input Systems (ARTCOPS). The algorithm is useful when FTLs are in operation under a production order that is different from the pre-decided production schedule. Simulations of virtual production systems have been carried out to verify that ARTCOPS is useful in real time control, although the production orders are different from the pre-decided production scheduling.

32 CFR Appendix B to Part 327 - Internal Management Control Review Checklist

Science.gov (United States)

2010-07-01

... 32 National Defense 2 2010-07-01 2010-07-01 false Internal Management Control Review Checklist B... B to Part 327—Internal Management Control Review Checklist (a) Task: Personnel and/or Organization... See footnote 2 to this Appendix B. (1) I attest that the above listed internal controls provide...

Kennedy Space Center Press Site (SWMU 074) Interim Measure Report

Science.gov (United States)

Applegate, Joseph L.

2015-01-01

This report summarizes the Interim Measure (IM) activities conducted at the Kennedy Space Center (KSC) Press Site ("the Press Site"). This facility has been designated as Solid Waste Management Unit 074 under KSC's Resource Conservation and Recovery Act Corrective Action program. The activities were completed as part of the Vehicle Assembly Building (VAB) Area Land Use Controls Implementation Plan (LUCIP) Elimination Project. The purpose of the VAB Area LUCIP Elimination Project was to delineate and remove soil affected with constituents of concern (COCs) that historically resulted in Land Use Controls (LUCs). The goal of the project was to eliminate the LUCs on soil. LUCs for groundwater were not addressed as part of the project and are not discussed in this report. This report is intended to meet the Florida Department of Environmental Protection (FDEP) Corrective Action Management Plan requirement as part of the KSC Hazardous and Solid Waste Amendments permit and the U.S. Environmental Protection Agency's (USEPA's) Toxic Substance Control Act (TSCA) self-implementing polychlorinated biphenyl (PCB) cleanup requirements of 40 Code of Federal Regulations (CFR) 761.61(a).

Industrial center of gathering, warehousing and storage. Annual report 2015

International Nuclear Information System (INIS)

2016-01-01

This report first presents the installations of the Cires (industrial center for regrouping, warehousing and storage), its equipment and buildings, its activities (storage of very-low-activity wastes, regrouping and warehousing of non-electronuclear wastes). It reviews the arrangements regarding safety and radiation protection: radioactive waste storage safety, safety of non-electronuclear waste regrouping and warehousing, relationship with the regional directorate of environment, planning and housing (DREAL), quality audits, staff safety, and radiation protection. It addresses the actions undertaken for the monitoring of the environment and of releases by the installations: radiological control in various locations (measurements in soils, waters, underground waters, and atmospheric releases), physical and chemical controls. The next part reports actions regarding transparency and information (visits, conferences, exhibitions, relationship with the local information and control commission)

Industrial center of gathering, warehousing and storage. Annual report 2016

International Nuclear Information System (INIS)

2016-01-01

This report first presents the installations of the Cires (industrial center for regrouping, warehousing and storage), its equipment and buildings, its activities (storage of very-low-activity wastes, regrouping and warehousing of non-electronuclear wastes). It reviews the arrangements regarding safety and radiation protection: radioactive waste storage safety, safety of non-electronuclear waste regrouping and warehousing, relationship with the regional directorate of environment, planning and housing (DREAL), quality audits, staff safety, and radiation protection. It addresses the actions undertaken for the monitoring of the environment and of releases by the installations: radiological control in various locations (measurements in soils, waters, underground waters, and atmospheric releases), physical and chemical controls. The next part reports actions regarding transparency and information (visits, conferences, exhibitions, relationship with the local information and control commission)

Active tilting-pad journal bearings supporting flexible rotors: Part II–The model-based feedback-controlled lubrication

DEFF Research Database (Denmark)

Salazar, Jorge Andrés González; Santos, Ilmar

2017-01-01

This is part II of a twofold paper series dealing with the design and implementation of model-based controllers meant for assisting the hybrid and developing the feedback-controlled lubrication regimes in active tilting pad journal bearings (active TPJBs). In both papers theoretical and experimen...... derived in part I. Results show further suppression of resonant vibrations when using the feedback-controlled or active lubrication, overweighting the reduction already achieved with hybrid lubrication, thus improving the whole machine dynamic performance.......This is part II of a twofold paper series dealing with the design and implementation of model-based controllers meant for assisting the hybrid and developing the feedback-controlled lubrication regimes in active tilting pad journal bearings (active TPJBs). In both papers theoretical...... and experimental analyses are presented with focus on the reduction of rotor lateral vibration. This part is devoted to synthesising model-based LQG optimal controllers (LQR regulator + Kalman Filter) for the feedback-controlled lubrication and is based upon the mathematical model of the rotor-bearing system...

Displacement of the posterior part of the eyeball in myopia

International Nuclear Information System (INIS)

Akizawa, Yasuko; Ida, Masahiro

2006-01-01

The principal aim of this study was to investigate displacement of the posterior part of the eyeball within the muscle cone in myopic eyes, particularly in moderately myopic subjects as well as in high myopes. Secondly, the correlation of the amount of displacement and the outer axial length of the globe was studied. The direction of displacement was also examined to clarify whether the eyeball tends to shift toward a certain direction. Seven patients with moderate myopia (moderate myopia group), fifteen patients with high myopia without esotropia (high myopia group), five patients with high myopia and esotropia (myopic esotropia group), and twenty-two controls (control group) were examined. Using magnetic resonance imaging, the outer axial length and the displacement of the posterior portion of the eyeball in the muscle cone were measured. In order to eliminate interindividual differences in the facial configuration, the coronal scanning was done perpendicularly to the orbital axis. The displacement was measured in a plane 4 mm anterior to the globe-optic nerve junction. The displacement was represented by the distance and direction of the globe center from the center of the muscle cone. In the moderate myopia group, there was no displacement of the posterior part of the eyeball in the muscle cone. It was the same as in the control group. But among the three groups, the displacement (mean±standard deviation) was significantly greater in the myopic esotropia group (1.53±0.49 mm) and the high myopia group (0.94±0.52 mm) than in the control group (0.11±0.18 mm) (one way ANOVA and multiple comparison). The outer axial length and the distance of the displacement in all cases was significantly correlated (r=0.87, p=0.01). Moreover, the posterior part of the eyeball of the myopic esotropia group and the high myopia group was displaced superiorly and temporally. The posterior part of the eyeball of myopic eyes was displaced superotemporally in the muscle cone

Test Platform for Advanced Digital Control of Brushless DC Motors (MSFC Center Director's Discretionary Fund)

Science.gov (United States)

Gwaltney, D. A.

2002-01-01

A FY 2001 Center Director's Discretionary Fund task to develop a test platform for the development, implementation. and evaluation of adaptive and other advanced control techniques for brushless DC (BLDC) motor-driven mechanisms is described. Important applications for BLDC motor-driven mechanisms are the translation of specimens in microgravity experiments and electromechanical actuation of nozzle and fuel valves in propulsion systems. Motor-driven aerocontrol surfaces are also being utilized in developmental X vehicles. The experimental test platform employs a linear translation stage that is mounted vertically and driven by a BLDC motor. Control approaches are implemented on a digital signal processor-based controller for real-time, closed-loop control of the stage carriage position. The goal of the effort is to explore the application of advanced control approaches that can enhance the performance of a motor-driven actuator over the performance obtained using linear control approaches with fixed gains. Adaptive controllers utilizing an exact model knowledge controller and a self-tuning controller are implemented and the control system performance is illustrated through the presentation of experimental results.

FAA Alleged Waste and Mismanagement of Air Route Traffic Control Centers Critical and Essential Power Systems Project

Science.gov (United States)

1996-10-16

The Office of Inspector General (OIG) reviewed a complaint from Congressman Deal on behalf of a constituent. The constituent alleged waste and mismanagement occurred in the Federal Aviation Administration (FAA) Air Route Traffic Control Centers Criti...

A multi-center randomized controlled trial to compare a self-ligating bracket with a conventional bracket in a UK population: Part 1: Treatment efficiency.

Science.gov (United States)

O'Dywer, Lian; Littlewood, Simon J; Rahman, Shahla; Spencer, R James; Barber, Sophy K; Russell, Joanne S

2016-01-01

To use a two-arm parallel trial to compare treatment efficiency between a self-ligating and a conventional preadjusted edgewise appliance system. A prospective multi-center randomized controlled clinical trial was conducted in three hospital orthodontic departments. Subjects were randomly allocated to receive treatment with either a self-ligating (3M SmartClip) or conventional (3M Victory) preadjusted edgewise appliance bracket system using a computer-generated random sequence concealed in opaque envelopes, with stratification for operator and center. Two operators followed a standardized protocol regarding bracket bonding procedure and archwire sequence. Efficiency of each ligation system was assessed by comparing the duration of treatment (months), total number of appointments (scheduled and emergency visits), and number of bracket bond failures. One hundred thirty-eight subjects (mean age 14 years 11 months) were enrolled in the study, of which 135 subjects (97.8%) completed treatment. The mean treatment time and number of visits were 25.12 months and 19.97 visits in the SmartClip group and 25.80 months and 20.37 visits in the Victory group. The overall bond failure rate was 6.6% for the SmartClip and 7.2% for Victory, with a similar debond distribution between the two appliances. No significant differences were found between the bracket systems in any of the outcome measures. No serious harm was observed from either bracket system. There was no clinically significant difference in treatment efficiency between treatment with a self-ligating bracket system and a conventional ligation system.

Initial Flight Test of the Production Support Flight Control Computers at NASA Dryden Flight Research Center

Science.gov (United States)

Carter, John; Stephenson, Mark

1999-01-01

The NASA Dryden Flight Research Center has completed the initial flight test of a modified set of F/A-18 flight control computers that gives the aircraft a research control law capability. The production support flight control computers (PSFCC) provide an increased capability for flight research in the control law, handling qualities, and flight systems areas. The PSFCC feature a research flight control processor that is "piggybacked" onto the baseline F/A-18 flight control system. This research processor allows for pilot selection of research control law operation in flight. To validate flight operation, a replication of a standard F/A-18 control law was programmed into the research processor and flight-tested over a limited envelope. This paper provides a brief description of the system, summarizes the initial flight test of the PSFCC, and describes future experiments for the PSFCC.

Information system design of inventory control spare parts maintenance (valuation class 5000) (case study: plant kw)

Science.gov (United States)

Fitriana, Rina; Moengin, Parwadi; Riana, Mega

2016-02-01

Plat KW hadn't using optimal inventory level planning yet and hadn't have an information system that well computerized. The research objective is to be able to design an information system related inventory control of spare parts maintenance. The study focused on five types of spare parts with the highest application rate during February 2013- March 2015 and included in the classification of fast on FSN analysis Grinding stones Cut 4". Cable Tie 15". Welding RB 26-32MM. Ring Plat ½" and Ring Plate 5/8 ". Inventory calculation used Economic Order Quantity (EOQ). Safety Stock (SS) and Reorder Point (ROP) methods. System analysis conducted using the framework PIECES with the proposed inventory control system. the performance of the plant KW relating to the supply of spare parts maintenance needs can be more efficient as well as problems at the company can be answered and can perform inventory cost savings amounting Rp.267.066. A computerized information system of inventory control spare parts maintenance provides a menu that can be accessed by each departments as the user needed.

Energy Frontier Research Center, Center for Materials Science of Nuclear Fuels

Energy Technology Data Exchange (ETDEWEB)

Todd R. Allen

2011-12-01

This is a document required by Basic Energy Sciences as part of a mid-term review, in the third year of the five-year award period and is intended to provide a critical assessment of the Center for Materials Science of Nuclear Fuels (strategic vision, scientific plans and progress, and technical accomplishments).

Controlling Precision Stepper Motors in Flight Using (Almost) No Parts

Science.gov (United States)

Randall, David

2010-01-01

This concept allows control of high-performance stepper motors with minimal parts count and minimal flight software complexity. Although it uses a small number of common flight-qualified parts and simple control algorithms, it is capable enough to meet demanding system requirements. Its programmable nature makes it trivial to implement changes to control algorithms both during integration & test and in flight. Enhancements such as microstepping, half stepping, back-emf compensation, and jitter reduction can be tailored to the requirements of a large variety of stepper motor based applications including filter wheels, focus mechanisms, antenna tracking subsystems, pointing and mobility. The hardware design (using an H-bridge motor controller IC) was adapted from JPL's MER mission, still operating on Mars. This concept has been fully developed and incorporated into the MCS instrument on MRO, currently operating in Mars orbit. It has been incorporated into the filter wheel mechanism and linear stage (focus) mechanism for the AMT instrument. On MCS/MRO, two of these circuits control the elevation and azimuth of the MCS telescope/radiometer assembly, allowing the instrument to continuously monitor the limb of the Martian atmosphere. Implementation on MCS/MRO resulted in a 4:1 reduction in the volume and mass required for the motor driver electronics (100:25 square inches of PCB space), producing a very compact instrument. In fact, all of the electronics for the MCS instrument are packaged within the movable instrument structure. It also saved approximately 3 Watts of power. Most importantly, the design enabled MCS to meet very its stringent maximum allowable torque disturbance requirements.

Recovery Act: Federspiel Controls (now Vigilent) and State of California Department of General Services Data Center Energy Efficient Cooling Control Demonstration. Final technical project report

Energy Technology Data Exchange (ETDEWEB)

Federspiel, Clifford; Evers, Myah

2011-09-30

Eight State of California data centers were equipped with an intelligent energy management system to evaluate the effectiveness, energy savings, dollar savings and benefits that arise when powerful artificial intelligence-based technology measures, monitors and actively controls cooling operations. Control software, wireless sensors and mesh networks were used at all sites. Most sites used variable frequency drives as well. The system dynamically adjusts temperature and airflow on the fly by analyzing real-time demands, thermal behavior and historical data collected on site. Taking into account the chaotic interrelationships of hundreds to thousands of variables in a data center, the system optimizes the temperature distribution across a facility while also intelligently balancing loads, outputs, and airflow. The overall project will provide a reduction in energy consumption of more than 2.3 million kWh each year, which translates to $240,000 saved and a reduction of 1.58 million pounds of carbon emissions. Across all sites, the cooling energy consumption was reduced by 41%. The average reduction in energy savings across all the sites that use VFDs is higher at 58%. Before this case study, all eight data centers ran the cooling fans at 100% capacity all of the time. Because of the new technology, cooling fans run at the optimum fan speed maintaining stable air equilibrium while also expending the least amount of electricity. With lower fan speeds, the life of the capital investment made on cooling equipment improves, and the cooling capacity of the data center increases. This case study depicts a rare technological feat: The same process and technology worked cost effectively in eight very different environments. The results show that savings were achieved in centers with diverse specifications for the sizes, ages and types of cooling equipment. The percentage of cooling energy reduction ranged from 19% to 78% while keeping temperatures substantially within the

Dimensional metrology for process and part quality control in micro manufacturing

DEFF Research Database (Denmark)

Hansen, Hans Nørgaard; Tosello, Guido; Gasparin, Stefania

2011-01-01

dimensions are scaled down and geometrical complexity of objects is increased, the available measurement technologies appear not sufficient. New solutions for measuring principles and instrumentation, tolerancing rules and procedures as well as traceability and calibration are necessary if micro......Micro manufacturing has gained interest over the last decade as the demand for micro mechanical components has increased. The need for dimensional metrology at micro scale is evident both in terms of quality assurance of components and products and in terms of process control. As critical...... manufacturing is to develop into industrial manufacturing solutions. In this paper the application of dimensional precision metrology to both component and process quality control will be demonstrated. The parts investigated are micro injection moulded polymer parts, typical for the field of micro manufacturing....

77 FR 31018 - Board of Scientific Counselors (BSC), National Center for Injury Prevention and Control (NCIPC)

Science.gov (United States)

2012-05-24

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Board of... Violence or Sexual Violence Perpetration (R01), FOA CE12-003. In accordance with Section 10(a)(2) of the..., discussion of competitive applications following initial review of applications received in response to FOA...

Design and implementation of robust decentralized control laws for the ACES structure at Marshall Space Flight Center

Science.gov (United States)

Collins, Emmanuel G., Jr.; Phillips, Douglas; Hyland, David C.

1990-01-01

An experiment was conducted to design controllers that would provide substantial reduction of line-of-sight control errors. The satisfaction of this objective required the controllers to attenuate the beam vibration significantly. Particular emphasis was placed on controller simplicity (i.e., reduced-order and decentralized controller architectures). Complexity reduction in control law implementation is of paramount interest due to stringent limitations on throughput of even state-of-the-art space qualified processors. The results of this experiment successfully demonstrate active vibrator control for a flexible structure. The testbed is the ACES structure at the NASA Marshall Space Flight Center. The ACES structure is dynamically traceable to future space systems and especially allows the study of line-of-sight control issues.

Design of analog networks in the control theory formulation. Part 2: Numerical results

OpenAIRE

Zemliak, A. M.

2005-01-01

The paper presents numerical results of design of nonlinear electronic networks based on the problem formulation in terms of the control theory. Several examples illustrate the prospects of the approach suggested in the first part of the work.

Adaptation of Control Center Software to Commerical Real-Time Display Applications

Science.gov (United States)

Collier, Mark D.

1994-01-01

NASA-Marshall Space Flight Center (MSFC) is currently developing an enhanced Huntsville Operation Support Center (HOSC) system designed to support multiple spacecraft missions. The Enhanced HOSC is based upon a distributed computing architecture using graphic workstation hardware and industry standard software including POSIX, X Windows, Motif, TCP/IP, and ANSI C. Southwest Research Institute (SwRI) is currently developing a prototype of the Display Services application for this system. Display Services provides the capability to generate and operate real-time data-driven graphic displays. This prototype is a highly functional application designed to allow system end users to easily generate complex data-driven displays. The prototype is easy to use, flexible, highly functional, and portable. Although this prototype is being developed for NASA-MSFC, the general-purpose real-time display capability can be reused in similar mission and process control environments. This includes any environment depending heavily upon real-time data acquisition and display. Reuse of the prototype will be a straight-forward transition because the prototype is portable, is designed to add new display types easily, has a user interface which is separated from the application code, and is very independent of the specifics of NASA-MSFC's system. Reuse of this prototype in other environments is a excellent alternative to creation of a new custom application, or for environments with a large number of users, to purchasing a COTS package.

Safety concerns with the Centers for Disease Control opioid calculator

Directory of Open Access Journals (Sweden)

Fudin J

2017-12-01

Full Text Available Jeffrey Fudin,1–4 Mena Raouf,2 Erica L Wegrzyn,2–4 Michael E Schatman5,61Scientific and Clinical Affairs, Remitigate, LLC, Delmar, NY, USA; 2Stratton VA Medical Center, Albany, NY, USA; 3Western New England University College of Pharmacy, Springfield, MA, USA; 4Albany College of Pharmacy & Health Sciences, Albany, NY, USA; 5Research and Network Development, Boston Pain Care, Waltham, MA, USA; 6Department of Public Health & Community Medicine, Tufts University School of Medicine, Boston, MA, USAMorphine milligram equivalence (MME and other comparable acronyms have been employed in federal pain guidelines and used by policy makers to limit opioid prescribing.1–5 On March 18, 2016, the Centers for Disease Control (CDC released its Guideline for Prescribing Opioids for Chronic Pain.1 The guidelines provided 12 recommendations for “primary care clinicians prescribing opioids for chronic pain outside of active cancer treatment, palliative care, and end-of-life care”. One of the CDC recommendations states that clinicians “should avoid increasing dosage to ≥90 MME/day or carefully justify a decision to titrate dosage to ≥90 MME/day”.1

Laser polarization dependent and magnetically control of group velocity in a dielectric medium doped with nanodiamond nitrogen vacancy centers

Energy Technology Data Exchange (ETDEWEB)

Asadpour, Seyyed Hossein; Rahimpour Soleimani, H., E-mail: Rahimpour@guilan.ac.ir

2014-03-01

In this paper, group velocity control of Gaussian beam in a dielectric medium doped with nanodiamond nitrogen vacancy (NV) centers under optical excitation is discussed. The shape of transmitted and reflected pulses from dielectric can be tuned by changing the intensity of magnetic field and polarization of the control beam. The effect of intensity of control beam on group velocity is also investigated.

Adaptive Control of Non-Minimum Phase Modal Systems Using Residual Mode Filters2. Parts 1 and 2

Science.gov (United States)

Balas, Mark J.; Frost, Susan

2011-01-01

Many dynamic systems containing a large number of modes can benefit from adaptive control techniques, which are well suited to applications that have unknown parameters and poorly known operating conditions. In this paper, we focus on a direct adaptive control approach that has been extended to handle adaptive rejection of persistent disturbances. We extend this adaptive control theory to accommodate problematic modal subsystems of a plant that inhibit the adaptive controller by causing the open-loop plant to be non-minimum phase. We will modify the adaptive controller with a Residual Mode Filter (RMF) to compensate for problematic modal subsystems, thereby allowing the system to satisfy the requirements for the adaptive controller to have guaranteed convergence and bounded gains. This paper will be divided into two parts. Here in Part I we will review the basic adaptive control approach and introduce the primary ideas. In Part II, we will present the RMF methodology and complete the proofs of all our results. Also, we will apply the above theoretical results to a simple flexible structure example to illustrate the behavior with and without the residual mode filter.

MINIMIZING GLOVEBOX GLOVE BREACHES, PART IV: CONTROL CHARTS

International Nuclear Information System (INIS)

Cournoyer, Michael E.; Lee, Michelle B.; Schreiber, Stephen B.

2007-01-01

At the Los Alamos National Laboratory (LANL) Plutonium Facility, plutonium. isotopes and other actinides are handled in a glovebox environment. The spread of radiological contamination, and excursions of contaminants into the worker's breathing zone, are minimized and/or prevented through the use of glovebox technology. Evaluating the glovebox configuration, the glovebo gloves are the most vulnerable part of this engineering control. Recognizing this vulnerability, the Glovebox Glove Integrity Program (GGIP) was developed to minimize and/or prevent unplanned openings in the glovebox environment, i.e., glove failures and breaches. In addition, LANL implement the 'Lean Six Sigma (LSS)' program that incorporates the practices of Lean Manufacturing and Six Sigma technologies and tools to effectively improve administrative and engineering controls and work processes. One tool used in LSS is the use of control charts, which is an effective way to characterize data collected from unplanned openings in the glovebox environment. The benefit management receives from using this tool is two-fold. First, control charts signal the absence or presence of systematic variations that result in process instability, in relation to glovebox glove breaches and failures. Second, these graphical representations of process variation detennine whether an improved process is under control. Further, control charts are used to identify statistically significant variations (trends) that can be used in decision making to improve processes. This paper discusses performance indicators assessed by the use control charts, provides examples of control charts, and shows how managers use the results to make decisions. This effort contributes to LANL Continuous Improvement Program by improving the efficiency, cost effectiveness, and formality of glovebox operations.

78 FR 11521 - Control of Communicable Disease; Foreign-Requirements for Importers of Nonhuman Primates (NHP)

Science.gov (United States)

2013-02-15

... Part 71 Control of Communicable Disease; Foreign--Requirements for Importers of Nonhuman Primates (NHP... Primates (NHP) AGENCY: Centers for Disease Control and Prevention (CDC), Department of Health and Human... live nonhuman primates (NHPs) by extending existing requirements for the importation of Macaca...

Optimality with feedback control in relativistic dynamics of a mass point. Part 1

International Nuclear Information System (INIS)

Blaquiere, A.; Pauchard, M.; Tahri-Yousfi, N.; Wickers, D.

1984-01-01

This article is an account of part of a research task currently in progress; it deals with relativistic dynamics of a mass-point from the point of view of the theory of optimal feedback control. In the first part, the theoretical frame is presented with an application to the case of special Relativity. This application shows that the way followed in this article is a natural one for approaching Wave mechanics, and that it closely parallels the way along which Louis de Broglie introduced Wave mechanics [fr

Surgical Outcome of Intermittent Exotropia With Improvement in Control Grade Subsequent to Part-time Preoperative Occlusion Therapy.

Science.gov (United States)

Bang, Seung Pil; Lee, Dong Cheol; Lee, Se Youp

2018-01-01

To evaluate the effect of improvement in the control grade of intermittent exotropia using part-time occlusion therapy on the final postoperative outcome. Control of intermittent exotropia was graded as good, fair, or poor in 89 consecutive patients with intermittent exotropia during their first visit. The patients were reevaluated after part-time preoperative occlusion therapy and divided into two groups (improvement and no improvement) according to whether they showed improvement in control grade. The surgical success rate was compared retrospectively between the two groups. The mean angle of deviation on the first visit was 27.61 ± 5.40 prism diopters (PD) at distance and 29.82 ± 5.28 PD at near. There were significant improvements in the angles of deviation for distance (26.17 ± 5.09 PD) and near (27.26 ± 5.56 PD) after part-time occlusion (both P Part-time occlusion therapy improves the control grade of intermittent exotropia, leading to a better likelihood of successful surgery and a reduction of the angles of deviation for distance and near. [J Pediatr Ophthalmol Strabismus. 2018;55(1):59-64.]. Copyright 2017, SLACK Incorporated.

Electrolysis activities at FCH Test Center

DEFF Research Database (Denmark)

Ravn Nielsen, Eva; Nygaard, Frederik Berg

FCH Test Center for fuel cell and hydrogen technologies was established in 2010 at Risø DTU in Denmark. Today, the test center is part of DTU Energy Conversion. The center gives industry access to advanced testing and demonstration of components and systems. A number of national projects and EU...... projects regarding water electrolysis involve FCH Test Center as a partner. This presentation gives an overview of the activities....

Quality control and process capability assessment for injection-moulded micro mechanical parts

DEFF Research Database (Denmark)

Gasparin, Stefania; Tosello, Guido; Hansen, Hans Nørgaard

2013-01-01

Quality control of micro components is an increasing challenge. Smaller mechanical parts are characterized by smaller tolerance to be verified. This paper focuses on the dimensional verification of micro injection-moulded components selected from an industrial application. These parts are measured...... using an optical coordinate measuring machine, which guarantees fast surface scans suitable for inline quality control. The uncertainty assessment of the measurements is calculated and three analyses are carried out and discussed in order to investigate the influence parameters in optical coordinate...... metrology. The estimation of the total variability of the optical measurements and the instrument repeatability are reported; moreover, the measurement system capability is evaluated according to the measurement system capability indices Cg and Cgk....

The Development of a Virtual Company to Support the Reengineering of the NASA/Goddard Hubble Space Telescope Control Center System

Science.gov (United States)

Lehtonen, Ken

1999-01-01

This is a report to the Third Annual International Virtual Company Conference, on The Development of a Virtual Company to Support the Reengineering of the NASA/Goddard Hubble Space Telescope (HST) Control Center System. It begins with a HST Science "Commercial": Brief Tour of Our Universe showing various pictures taken from the Hubble Space Telescope. The presentation then reviews the project background and goals. Evolution of the Control Center System ("CCS Inc.") is then reviewed. Topics of Interest to "virtual companies" are reviewed: (1) "How To Choose A Team" (2) "Organizational Model" (3) "The Human Component" (4) "'Virtual Trust' Among Teaming Companies" (5) "Unique Challenges to Working Horizontally" (6) "The Cultural Impact" (7) "Lessons Learned".

Emergency Flight Control Using Only Engine Thrust and Lateral Center-of-Gravity Offset: A First Look

Science.gov (United States)

Burcham, Frank W., Jr.; Burken, John; Maine, Trindel A.; Bull, John

1997-01-01

Normally, the damage that results in a total loss of the primary flight controls of a jet transport airplane, including all engines on one side, would be catastrophic. In response, NASA Dryden has conceived an emergency flight control system that uses only the thrust of a wing-mounted engine along with a lateral center-of-gravity (CGY) offset from fuel transfer. Initial analysis and simulation studies indicate that such a system works, and recent high-fidelity simulation tests on the MD-11 and B-747 suggest that the system provides enough control for a survivable landing. This paper discusses principles of flight control using only a wing engine thrust and CGY offset, along with the amount of CGY offset capability of some transport airplanes. The paper also presents simulation results of the throttle-only control capability and closed-loop control of ground track using computer-controlled thrust.

The Space Technology-7 Disturbance Reduction System Precision Control Flight Validation Experiment Control System Design

Science.gov (United States)

O'Donnell, James R.; Hsu, Oscar C.; Maghami, Peirman G.; Markley, F. Landis

2006-01-01

As originally proposed, the Space Technology-7 Disturbance Reduction System (DRS) project, managed out of the Jet Propulsion Laboratory, was designed to validate technologies required for future missions such as the Laser Interferometer Space Antenna (LISA). The two technologies to be demonstrated by DRS were Gravitational Reference Sensors (GRSs) and Colloidal MicroNewton Thrusters (CMNTs). Control algorithms being designed by the Dynamic Control System (DCS) team at the Goddard Space Flight Center would control the spacecraft so that it flew about a freely-floating GRS test mass, keeping it centered within its housing. For programmatic reasons, the GRSs were descoped from DRS. The primary goals of the new mission are to validate the performance of the CMNTs and to demonstrate precise spacecraft position control. DRS will fly as a part of the European Space Agency (ESA) LISA Pathfinder (LPF) spacecraft along with a similar ESA experiment, the LISA Technology Package (LTP). With no GRS, the DCS attitude and drag-free control systems make use of the sensor being developed by ESA as a part of the LTP. The control system is designed to maintain the spacecraft s position with respect to the test mass, to within 10 nm/the square root of Hz over the DRS science frequency band of 1 to 30 mHz.

Production and survival of projection neurons in a forebrain vocal center of adult male canaries

International Nuclear Information System (INIS)

Kirn, J.R.; Alvarez-Buylla, A.; Nottebohm, F.

1991-01-01

Neurons are produced in the adult canary telencephalon. Many of these cells are incorporated into the high vocal center (nucleus HVC), which participates in the control of learned song. In the present work, 3H-thymidine and fluorogold were employed to follow the differentiation and survival of HVC neurons born in adulthood. We found that many HVC neurons born in September grow long axons to the robust nucleus of the archistriatum (nucleus RA) and thus become part of the efferent pathway for song control. Many of these new neurons have already established their connections with RA by 30 d after their birth. By 240 d, 75-80% of the September-born HVC neurons project to RA. Most of these new projection neurons survive at least 8 months. The longevity of HVC neurons born in September suggests that these cells remain part of the vocal control circuit long enough to participate in the yearly renewal of the song repertoire

32 CFR Appendix G to Part 505 - Management Control Evaluation Checklist

Science.gov (United States)

2010-07-01

... CIVIL AUTHORITIES AND PUBLIC RELATIONS ARMY PRIVACY ACT PROGRAM Pt. 505, App. G Appendix G to Part 505—Management Control Evaluation Checklist (a) Function. The function covered by this checklist is DA Privacy...

Superconducting Qubit with Integrated Single Flux Quantum Controller Part I: Theory and Fabrication

Science.gov (United States)

Beck, Matthew; Leonard, Edward, Jr.; Thorbeck, Ted; Zhu, Shaojiang; Howington, Caleb; Nelson, Jj; Plourde, Britton; McDermott, Robert

As the size of quantum processors grow, so do the classical control requirements. The single flux quantum (SFQ) Josephson digital logic family offers an attractive route to proximal classical control of multi-qubit processors. Here we describe coherent control of qubits via trains of SFQ pulses. We discuss the fabrication of an SFQ-based pulse generator and a superconducting transmon qubit on a single chip. Sources of excess microwave loss stemming from the complex multilayer fabrication of the SFQ circuit are discussed. We show how to mitigate this loss through judicious choice of process workflow and appropriate use of sacrificial protection layers. Present address: IBM T.J. Watson Research Center.

Tobacco control and gender in Southeast Asia. Part I: Malaysia and the Philippines.

Science.gov (United States)

Morrow, Martha; Barraclough, Simon

2003-09-01

In the World Health Organization's Western Pacific Region, being born male is the single greatest risk marker for tobacco use. While the literature demonstrates that risks associated with tobacco use may vary according to sex, gender refers to the socially determined roles and responsibilities of men and women, who initiate, continue and quit using tobacco for complex and often different reasons. Cigarette advertising frequently appeals to gender roles. Yet tobacco control policy tends to be gender-blind. Using a broad gender-sensitivity framework, this contradiction is explored in four Western Pacific countries. Part I of the study discusses issues surrounding gender and tobacco, and analyses developments in Malaysia and the Philippines. Part II deals with Singapore and Vietnam. In all four countries, gender was salient for the initiation and maintenance of smoking, and in Malaysia and the Philippines was highly significant in cigarette promotion. Yet, with a few exceptions, gender was largely unrecognized in control policy. Suggestions for overcoming this weakness in order to enhance tobacco control are made in Part II.

Promoting physical activity, healthy eating and gross motor skills development among preschoolers attending childcare centers: Process evaluation of the Healthy Start-Départ Santé intervention using the RE-AIM framework.

Science.gov (United States)

Ward, Stéphanie; Chow, Amanda Froehlich; Humbert, M Louise; Bélanger, Mathieu; Muhajarine, Nazeem; Vatanparast, Hassan; Leis, Anne

2018-06-01

The Healthy Start-Départ Santé intervention was developed to promote physical activity, gross motor skills and healthy eating among preschoolers attending childcare centers. This process evaluation aimed to report the reach, effectiveness, adoption, implementation and maintenance of the Healthy Start-Départ Santé intervention. The RE-AIM framework was used to guide this process evaluation. Data were collected across 140 childcare centers who received the Healthy Start-Départ Santé intervention in the provinces of Saskatchewan and New Brunswick, Canada. Quantitative data were collected through director questionnaires at 10 months and 2 years after the initial training and analyzed using descriptive statistics. Qualitative data were collected throughout the intervention. The intervention was successful in reaching a large number of childcare centres and engaging both rural and urban communities across Saskatchewan and New Brunswick. Centres reported increasing opportunities for physical activity and healthy eating, which were generally low-cost, easy and quick to implement. However, these changes were rarely transformed into formal written policies. A total of 87% of centers reported using the physical activity resource and 68% using the nutrition resource on a weekly basis. Implementation fidelity of the initial training was high. Of those centers who received the initial training, 75% participated in the mid-point booster session training. Two year post-implementation questionnaires indicated that 47% of centers were still using the Active Play Equipment kit, while 42% were still using the physical activity resource and 37% were still using the nutrition resource. Key challenges to implementation and sustainability identified during the evaluation were consistent among all of the REAIM elements. These challenges included lack of time, lack of support from childcare staff and low parental engagement. Findings from this study suggest the implementation of

Interobserver agreement of Centers for Disease Control and Prevention criteria for classifying infections in critically ill patients

NARCIS (Netherlands)

Klein Klouwenberg, Peter M. C.; Ong, David S. Y.; Bos, Lieuwe D. J.; de Beer, Friso M.; van Hooijdonk, Roosmarijn T. M.; Huson, Mischa A.; Straat, Marleen; van Vught, Lonneke A.; Wieske, Luuk; Horn, Janneke; Schultz, Marcus J.; van der Poll, Tom; Bonten, Marc J. M.; Cremer, Olaf L.

2013-01-01

Correct classification of the source of infection is important in observational and interventional studies of sepsis. Centers for Disease Control and Prevention criteria are most commonly used for this purpose, but the robustness of these definitions in critically ill patients is not known. We

Fort Mason Center: Pier 2 Project

Energy Technology Data Exchange (ETDEWEB)

Nester, Patrick [Fort Mason Center, San Francisco, CA (United States)

2014-08-30

The rooftop Photovoltaic (PV) panels and radiant piping project was constructed by Fort Mason Center as part of its $21 million comprehensive rehabilitation of the Pier 2 shed which include the shed’s electrical, natural gas and water systems. Fort Mason Center improved performance while reducing energy and water usage and costs to demonstrate the efficiencies and opportunities available to large multi-function facilities. The scalable demand of these facilities required a layered approach to conservation, control and production. The project employed a comprehensive retrofit of electrical natural gas, and plumbing systems to maximize efficiency and lower carbon footprint specifically to demonstrate the effectiveness of these strategies in a public setting with varied and diverse use. The project was completed in July 2014 and met the expected outcomes regarding increased comfort and operational efficiency throughout the Pier 2 shed as well as on site electrical generation of current consumption. The entire Pier 2 shed project won a 2015 California Preservation Foundation design award for historic rehabilitation.

Nuclear Energy Center Site Survey, 1975. Part III. Technical considerations

International Nuclear Information System (INIS)

1976-01-01

Studies of the technical feasibility of nuclear energy centers (NECs) and the comparison between NEC technical feasibility and that of nuclear facilities on dispersed sites are reviewed. The conclusions related to technical feasibility of NEC are summarized. Technical feasibility was found to rest mainly on five major issues: heat dissipation, transmission, facility construction, radiological impact, and environmental impact. Although general conclusions can be reached in these five areas, it is recognized that they are interdependent, and detailed site-by-site analysis will be necessary. Some general conclusions on technical feasibility of NECs are presented, then detailed conclusions derived from the technical evaluation of NECs compared to dispersed site facilities are presented. The findings of this study on each of the five major feasibility issues are then discussed in sequence. The study concludes that nuclear energy centers, as defined herein, are technically feasible

RECOVERY ACT: DYNAMIC ENERGY CONSUMPTION MANAGEMENT OF ROUTING TELECOM AND DATA CENTERS THROUGH REAL-TIME OPTIMAL CONTROL (RTOC): Final Scientific/Technical Report

Energy Technology Data Exchange (ETDEWEB)

Ron Moon

2011-06-30

This final scientific report documents the Industrial Technology Program (ITP) Stage 2 Concept Development effort on Data Center Energy Reduction and Management Through Real-Time Optimal Control (RTOC). Society is becoming increasingly dependent on information technology systems, driving exponential growth in demand for data center processing and an insatiable appetite for energy. David Raths noted, 'A 50,000-square-foot data center uses approximately 4 megawatts of power, or the equivalent of 57 barrels of oil a day1.' The problem has become so severe that in some cases, users are giving up raw performance for a better balance between performance and energy efficiency. Historically, power systems for data centers were crudely sized to meet maximum demand. Since many servers operate at 60%-90% of maximum power while only utilizing an average of 5% to 15% of their capability, there are huge inefficiencies in the consumption and delivery of power in these data centers. The goal of the 'Recovery Act: Decreasing Data Center Energy Use through Network and Infrastructure Control' is to develop a state of the art approach for autonomously and intelligently reducing and managing data center power through real-time optimal control. Advances in microelectronics and software are enabling the opportunity to realize significant data center power savings through the implementation of autonomous power management control algorithms. The first step to realizing these savings was addressed in this study through the successful creation of a flexible and scalable mathematical model (equation) for data center behavior and the formulation of an acceptable low technical risk market introduction strategy leveraging commercial hardware and software familiar to the data center market. Follow-on Stage 3 Concept Development efforts include predictive modeling and simulation of algorithm performance, prototype demonstrations with representative data center equipment to

Trends in Teenagers' Nonopiod Substance Exposures Reported to Poison Control Centers, 2010-2015.

Science.gov (United States)

Wright, Brad; Mestan, Samantha; Ahrens, Monica; Bottei, Edward

2018-05-01

To describe current trends in nonopioid substance exposures and associated outcomes among teenagers nationwide. In this cross-sectional study, we used 2010-2015 data from the American Association of Poison Control Centers' National Poison Data System and Poisson tests to document trends in the rate of calls to poison control centers involving adolescents stratified by sex, exposures by substance category, proportion of intentional exposures, and severity of exposures. The number of calls per 1000 persons increased from 5.7 to 6.8 for teenage girls and decreased from 4.7 to 4.3 for boys. Reported exposures to prescription and over-the-counter medications and illicit street drugs increased between 24% and 73%, and reported opioid exposures decreased by 16%. Among teenage girls, intentional exposures increased from 57% to 68%, with cases increasingly managed in health care facilities and more likely to result in worse health outcomes. The increase in intentional nonopioid substance exposures among teenage girls, with serious and potentially life-threatening consequences, is a matter of serious concern. Similar trends were not observed among teenage boys. Copyright © 2017 Elsevier Inc. All rights reserved.

Integrating CHWs as Part of the Team Leading Diabetes Group Visits: A Randomized Controlled Feasibility Study.

Science.gov (United States)

Vaughan, Elizabeth M; Johnston, Craig A; Cardenas, Victor J; Moreno, Jennette P; Foreyt, John P

2017-12-01

Purpose The purpose of the study was to evaluate the feasibility of integrating Community Health Workers (CHWs) as part of the team leading diabetes group visits. Methods This was a randomized controlled study that integrated CHWs as part of the team leading diabetes group visits for low-income Hispanic adults (n = 50). Group visits met for 3 hours each month for a 6-month duration. Main measures included baseline and 6-month clinical outcomes (ie, A1C, lipids), concordance with 8 standard of care guidelines (ie, screens for cervical, breast, and colon cancer) from the US Preventive Task Force and American Diabetes Association, and participant acceptability. Results Compared to control participants, the intervention group resulted in significantly better clinical outcomes or guideline concordance for the following areas: target A1C levels, retinal eye exams, diabetes foot exams, mammograms, and urine microalbumin. Significantly more individuals in the control group gained weight, whereas a greater number of participants in the intervention group lost weight. Intervention participants found the group visits highly acceptable. Conclusions Integrating CHWs as part a comprehensive diabetes group visit program is a feasible and effective system-level intervention to improve glycemic control and achieve guideline concordance.

Sustaining a Focus on Health Equity at the Centers for Disease Control and Prevention Through Organizational Structures and Functions.

Science.gov (United States)

Dean, Hazel D; Roberts, George W; Bouye, Karen E; Green, Yvonne; McDonald, Marian

2016-01-01

The public health infrastructure required for achieving health equity is multidimensional and complex. The infrastructure should be responsive to current and emerging priorities and capable of providing the foundation for developing, planning, implementing, and evaluating health initiatives. This article discusses these infrastructure requirements by examining how they are operationalized in the organizational infrastructure for promoting health equity at the Centers for Disease Control and Prevention, utilizing the nation's premier public health agency as a lens. Examples from the history of the Centers for Disease Control and Prevention's work in health equity from its centers, institute, and offices are provided to identify those structures and functions that are critical to achieving health equity. Challenges and facilitators to sustaining a health equity organizational infrastructure, as gleaned from the Centers for Disease Control and Prevention's experience, are noted. Finally, we provide additional considerations for expanding and sustaining a health equity infrastructure, which the authors hope will serve as "food for thought" for practitioners in state, tribal, or local health departments, community-based organizations, or nongovernmental organizations striving to create or maintain an impactful infrastructure to achieve health equity.

Cortical Activation during Landmark-Centered vs. Gaze-Centered Memory of Saccade Targets in the Human: An FMRI Study

Directory of Open Access Journals (Sweden)

Ying Chen

2017-06-01

Full Text Available A remembered saccade target could be encoded in egocentric coordinates such as gaze-centered, or relative to some external allocentric landmark that is independent of the target or gaze (landmark-centered. In comparison to egocentric mechanisms, very little is known about such a landmark-centered representation. Here, we used an event-related fMRI design to identify brain areas supporting these two types of spatial coding (i.e., landmark-centered vs. gaze-centered for target memory during the Delay phase where only target location, not saccade direction, was specified. The paradigm included three tasks with identical display of visual stimuli but different auditory instructions: Landmark Saccade (remember target location relative to a visual landmark, independent of gaze, Control Saccade (remember original target location relative to gaze fixation, independent of the landmark, and a non-spatial control, Color Report (report target color. During the Delay phase, the Control and Landmark Saccade tasks activated overlapping areas in posterior parietal cortex (PPC and frontal cortex as compared to the color control, but with higher activation in PPC for target coding in the Control Saccade task and higher activation in temporal and occipital cortex for target coding in Landmark Saccade task. Gaze-centered directional selectivity was observed in superior occipital gyrus and inferior occipital gyrus, whereas landmark-centered directional selectivity was observed in precuneus and midposterior intraparietal sulcus. During the Response phase after saccade direction was specified, the parietofrontal network in the left hemisphere showed higher activation for rightward than leftward saccades. Our results suggest that cortical activation for coding saccade target direction relative to a visual landmark differs from gaze-centered directional selectivity for target memory, from the mechanisms for other types of allocentric tasks, and from the directionally

Advanced Outage and Control Center: Strategies for Nuclear Plant Outage Work Status Capabilities

Energy Technology Data Exchange (ETDEWEB)

Gregory Weatherby

2012-05-01

The research effort is a part of the Light Water Reactor Sustainability (LWRS) Program. LWRS is a research and development program sponsored by the Department of Energy, performed in close collaboration with industry to provide the technical foundations for licensing and managing the long-term, safe and economical operation of current nuclear power plants. The LWRS Program serves to help the US nuclear industry adopt new technologies and engineering solutions that facilitate the continued safe operation of the plants and extension of the current operating licenses. The Outage Control Center (OCC) Pilot Project was directed at carrying out the applied research for development and pilot of technology designed to enhance safe outage and maintenance operations, improve human performance and reliability, increase overall operational efficiency, and improve plant status control. Plant outage management is a high priority concern for the nuclear industry from cost and safety perspectives. Unfortunately, many of the underlying technologies supporting outage control are the same as those used in the 1980’s. They depend heavily upon large teams of staff, multiple work and coordination locations, and manual administrative actions that require large amounts of paper. Previous work in human reliability analysis suggests that many repetitive tasks, including paper work tasks, may have a failure rate of 1.0E-3 or higher (Gertman, 1996). With between 10,000 and 45,000 subtasks being performed during an outage (Gomes, 1996), the opportunity for human error of some consequence is a realistic concern. Although a number of factors exist that can make these errors recoverable, reducing and effectively coordinating the sheer number of tasks to be performed, particularly those that are error prone, has the potential to enhance outage efficiency and safety. Additionally, outage management requires precise coordination of work groups that do not always share similar objectives. Outage

Increasing the operational efficiency and safety in operation control centers: the TRANSPETRO experience; Aumentando a seguranca e eficiencia operacional em centros de controle: a experiencia da TRANSPETRO

Energy Technology Data Exchange (ETDEWEB)

Felicio, Marco Aurelio Fierro; Frisoli, Caetano [PETROBRAS Transporte S.A. (TRANSPETRO), Rio de Janeiro, RJ (Brazil)

2009-12-19

The increase in operational efficiency and safety in operation control centers has been traditionally obtained through direct actions in the operational activity itself and on the resources and systems used for that. Modern supervisory and control systems, sophisticated simulation software, cutting-edge last generation equipment and installations, clear and comprehensive procedures definitions and intensive and constant training of the operation teams are, usually, the chosen paths followed by control centers in their incessant quest for increased operational efficiency and safety. This paper presents the path followed by the TRANSPETRO's National Operational Control Center - Natural Gas (Centro Nacional de Controle Operacional - CNCO-Gas) - that has not only focused with the traditional aspects above, but has also made intensive investments in systems and data base integrations, aiming at eliminating data inconsistencies and redundancies and at including automation, standardization and systematization of non-operational and complementary operational activities. These investments allowed TRANSPETRO CNCO-Gas face the big challenge of growing that TRANSPETRO's gas transportation activity is facing now and will be facing in the near future: from 2,600 km to 7,000 km of gas pipelines, and a volume of transported natural gas from 35 MMm{sup 3}/day to 100 MMm{sup 3}/day. (author)

Verification Testing of Air Pollution Control Technology Quality Management Plan Revision 2.3

Science.gov (United States)

The Air Pollution Control Technology Verification Center was established in 1995 as part of the EPA’s Environmental Technology Verification Program to accelerate the development and commercialization of improved environmental technologies’ performance.

Structured functional assessments in general practice increased the use of part-time sick leave: a cluster randomised controlled trial.

Science.gov (United States)

Osterås, Nina; Gulbrandsen, Pål; Kann, Inger Cathrine; Brage, Søren

2010-03-01

A method for structured functional assessments of persons with long-term sick leave was implemented in a cluster randomised controlled trial in general practice. The aim was to analyse intervention effects on general practitioner (GP) sick-listing practice and patient sick leave. 57 GPs were randomly assigned to an intervention or a control group. The intervention group GPs learned the method at a 1-day workshop including teamwork and role-playing. The control group GPs were requested to assess functional ability as usual during the 8 months intervention period in 2005. Outcome measures included duration of patient sick leave episodes, GP prescription of part-time sick leave, active sick leave, and vocational rehabilitation. This data was extracted from a national register. The GPs in the intervention group prescribed part-time sick leave more often (p part-time and less active sick leave compared to the control group GPs. As a result, more intervention GP patients returned to part-time work compared to control GP patients. No intervention effect was seen on duration of patient sick leave episodes or on prescription of vocational rehabilitation.

Radiological protection and routinary controls of an activimeter with a cesium and barium sources in an nuclear medicine center

International Nuclear Information System (INIS)

Morales L, M.E.

2006-01-01

In the present work the results when carrying out the routine controls in a Deluxe Isotope (Calibrator II) equipment, with some sources of Cesium 137 and Barium 133, in a Nuclear Medicine Center that operates from the year 1983 in a modern one construction inside the Institute of Neoplastic Illnesses (INEN) are shown. Taking in account the Radiological Protection measures to verify if the equipment responds to the personnel's demands in the measurements of activities of the diverse radionuclides that are used in different types of exams that are carried out in this Nuclear Medicine Center are the objectives of this work. This Center was equipped initially with donated equipment by the International Atomic Energy Agency (IAEA) with those that it develops assistance, educational works and of research, giving services to patients of the INEN and other public and private medical centers. (Author)

Implementing a Reliability Centered Maintenance Program at NASA's Kennedy Space Center

National Research Council Canada - National Science Library

Tuttle, Raymond

1998-01-01

.... A reliability centered maintenance (RCM) program seeks to offer equal or greater reliability at decreased cost by insuring only applicable, effective maintenance is performed and by in large part replacing time based maintenance...

The Standard Temperature Calibration Center of the CEN Saclay

International Nuclear Information System (INIS)

Liermann, J.

1978-01-01

The first part of this article describes the instruments available at the Standard Temperature Calibration Center of the CEN Saclay. At the moment the Center has been approved by the BNM to make calibrations between 0 and 1050 0 C, but the Center has recently developed some ovens which will allow calibrations up to 2000 0 C. The Center can also perform thermal and mechanical tests on detector components under the influence of external factors. The second part concerns the development of platinum-resistance high temperature thermometer. The calibrations by comparison between 0 and 1000 0 C are, at the moment, made by using platinum resistance thermometer as a reference up to 630 0 C and a platinum-rhodied/platinum thermocouple above 630 0 C. The use of only one reference could represent for a calibration center a great improvement. For this reason a platinum-resistance high temperature thermometer has been developed. Great care was taken during the conceptual design and during the selection and the assembly of each component [fr

Cultural resource survey report for construction of office building, driveway, and parking lot at the Stanford Linear Accelerator Center. Part 1

International Nuclear Information System (INIS)

Perry, M.E.

1995-01-01

An Environmental Assessment and associated documentation is reported for the construction of an office building and parking lot in support of environmental management personnel activities. As part of the documentation process, the DOE determined that the proposed project constituted an undertaking as defined in Section 106 of the National Historic Preservation Act. In accordance with the regulations implementing Section 106 of the National Historic Preservation Act, a records and literature search and historic resource identification effort were carried out on behalf of the Stanford Linear Accelerator Center (SLAC). This report summarizes cultural resource literature and record searches and a historic resource identification effort

Integrating CHWs as part of the team leading diabetes group visits: A randomized controlled feasibility study

Science.gov (United States)

The purpose of the study was to evaluate the feasibility of integrating Community Health Workers (CHWs) as part of the team leading diabetes group visits. This was a randomized controlled study that integrated CHWs as part of the team leading diabetes group visits for low-income Hispanic adults (n=5...

Public-Private Partnerships in Chronic Disease Prevention-Part 7

Centers for Disease Control (CDC) Podcasts

2009-04-06

This podcast is the last installment of a seven part series discussing public health partnerships with the private sector. In this segment, CDC's Elizabeth Majestic and Georgia State University's Michael Eriksen discuss how some lessons learned in the tobacco control experience might be relevant for the obesity epidemic.  Created: 4/6/2009 by National Center for Chronic Disease Prevention and Health Promotion (NCCDPHP).   Date Released: 4/6/2009.

Center for the Study of Traumatic Stress

Data.gov (United States)

Federal Laboratory Consortium — As part of the Department of Psychiatry of our federal medical school, the Uniformed Services University of the Health Sciences (USUHS), the Center was established...

Document control system as an integral part of RA documentation database application

International Nuclear Information System (INIS)

Steljic, M.M; Ljubenov, V.Lj. . E-mail address of corresponding author: milijanas@vin.bg.ac.yu; Steljic, M.M.)

2005-01-01

The decision about the final shutdown of the RA research reactor in Vinca Institute has been brought in 2002, and therefore the preparations for its decommissioning have begun. All activities are supervised by the International Atomic Energy Agency (IAEA), which also provides technical and experts' support. This paper describes the document control system is an integral part of the existing RA documentation database. (author)

Kennedy Space Center Spaceport Analysis

Science.gov (United States)

Wary, Samantha A.

2013-01-01

Until the Shuttle Atlantis' final landing on July 21, 2011, Kennedy Space Center (KSC) served as NASA's main spaceport, which is a launch and landing facility for rockets and spacecraft that are attempting to enter orbit. Many of the facilities at KSC were created to assist the Shuttle Program. One of the most important and used facilities is the Shuttle Landing Facility (SLF), This was the main landing area for the return of the shuttle after her mission in space. · However, the SLF has also been used for a number of other projects including straight-line testing by Gibbs Racing, weather data collection by NOAA, and an airfield for the KSC helicopters. This runway is three miles long with control tower at midfield and a fire department located at the end in care of an emergency. This facility, which was part of the great space race, will continue to be used for historical events as Kennedy begins to commercialize its facilities. KSC continues to be an important spaceport to the government, and it will transform into an important spaceport for the commercial industry as well. During my internship at KSC's Center Planning and Development Directorate, I had the opportunity to be a part of the negotiation team working on the agreement for Space Florida to control the Shuttle Landing Facility. This gave me the opportunity to learn about all the changes that are occurring here at Kennedy Space Center. Through various meetings, I discovered the Master Plan and its focus is to transform the existing facilities that were primarily used for the Shuttle Program, to support government operations and commercial flights in the future. This. idea is also in a new strategic business plan and completion of a space industry market analysis. All of these different documentations were brought to my attention and I. saw how they came together in the discussions of transitioning the SLF to a commercial operator, Space Florida. After attending meetings and partaking in discussions for

Part load performance of air-cooled centrifugal chillers with variable speed condenser fan control

Energy Technology Data Exchange (ETDEWEB)

Yu, F.W.; Chan, K.T. [Department of Building Services Engineering, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong (China)

2007-11-15

Air-cooled centrifugal chillers are commonly used in commercial buildings but their performance analysis is lacking. This paper investigates the part load performance of the chillers via a thermodynamic model. The model was validated using a wide range of operating data from an existing chiller with specific settings of outdoor temperature and condensing pressure in controlling the condensing temperature. The validated model was developed specifically to ascertain the maximum coefficient of performance of chiller (COP) together with the strategy for optimizing the condensing temperature under various operating conditions. It is found that the highest COP occurs at a part load ratio (PLR) of 0.71-0.84, depending on the outdoor temperature and the control of condensing temperature, rather than at full load. Yet the chillers operating at such part load conditions will cause extra energy used for the early staging of chilled water pumps. To minimize the overall chiller plant energy consumption, it is still preferable to implement chiller sequencing based on the full load condition than on the aforementioned PLRs. The results of this paper present criteria for implementing low-energy strategies for operating air-cooled chillers satisfying a given building cooling load profile. (author)

Taxonomy of Means and Ends in Aquaculture Production—Part 2: The Technical Solutions of Controlling Solids, Dissolved Gasses and pH

Directory of Open Access Journals (Sweden)

Bjorgvin Vilbergsson

2016-09-01

Full Text Available In engineering design, knowing the relationship between the means (technique and the end (desired function or outcome is essential. The means in Aquaculture are technical solutions like airlifts that are used to achive desired functionality (an end like controlling dissolved gasses. In previous work, the authors identified possible functions by viewing aquaculture production systems as transformation processes in which inputs are transformed by treatment techniques (means and produce outputs (ends. The current work creates an overview of technical solutions of treatment functions for both design and research purposes. A comprehensive literature review of all areas of technical solutions is identified and categorized into a visual taxonomy of the treatment functions for controlling solids, controlling dissolved gasses and controlling pH alkalinity and hardness. This article is the second in a sequence of four and partly presents the treatments functions in the taxonomy. The other articles in this series present complementary aspects of this research: Part 1, A transformational view on aquaculture and functions divided into input, treatment and output functions; Part 2, The current taxonomy paper; Part 3, The second part of the taxonomy; and Part 4, Mapping of the means (techniques for multiple treatment functions.

Royalty Fees Part I: The Copyright Clearance Center and Publishers.

Science.gov (United States)

Eiblum, Paula; Ardito, Stephanie C.

1998-01-01

Discussion of copyrights, royalty fees, and intellectual property focuses on the Copyright Clearance Center and publishers. Topics include results of a survey of library and information science journal publishers; how users verify royalty fees; how publishers determine fees; royalty fee reporting; and terms and conditions imposed on electronic…

[Scientific reductionism and social control of mind. Part II].

Science.gov (United States)

Viniegra Velázquez, Leonardo

In the second part of this essay, the progressive subordination of scientific endeavor and knowledge of business and profit is pointed out. For instance, the way facts are prioritized over concepts and ideas in scientific knowledge can translate into technological innovation, central to enterprise competitiveness and key to social mechanisms of control (military, cybernetic, ideological). Overcoming the scientific reductionism approach indicates recognizing the need to define progress in another way, one that infuses scientific knowledge with real liberating and inquisitive power. Power is essential in the search for a more collaborative, inclusive and pluralistic society where respect for human dignity and care for the ecosystem that we live in are prioritized. Copyright © 2014 Hospital Infantil de México Federico Gómez. Publicado por Masson Doyma México S.A. All rights reserved.

Influence of control algorithms parameters on an electromechanical converter with a secondary discrete part

Directory of Open Access Journals (Sweden)

Kuimov Denis

2017-01-01

Full Text Available An alternative configuration of a device with a secondary discrete part using a magnetic system of a similar multi-phase inductor machine and concentrated windings without an internal rotor is proposed. An algorithm of sensorless control of a motion process of a secondary discrete part is proposed. The analysis of the distribution nature of the magnetic field for various switching algorithms is carried out to reduce negative influence of the “dead” zones of the first and second order. The features of the movement process of the secondary discrete part in the working chamber of the device are considered. The results of in the electromagnetic force change affecting a ferromagnetic working element are presented, and recommendations for the application of switching algorithms are given.

Nuclear Energy Center Site Survey, 1975. Part V. Resource availability and site screening

International Nuclear Information System (INIS)

1976-01-01

Resource requirements for nuclear energy centers are discussed and the large land areas which meet these requirements and may contain potential sites for a nuclear energy center (NEC) are identified. Maps of the areas are included that identify seismic zones, river flow rates, and population density

High call volume at poison control centers: identification and implications for communication.

Science.gov (United States)

Caravati, E M; Latimer, S; Reblin, M; Bennett, H K W; Cummins, M R; Crouch, B I; Ellington, L

2012-09-01

High volume surges in health care are uncommon and unpredictable events. Their impact on health system performance and capacity is difficult to study. To identify time periods that exhibited very busy conditions at a poison control center and to determine whether cases and communication during high volume call periods are different from cases during low volume periods. Call data from a US poison control center over twelve consecutive months was collected via a call logger and an electronic case database (Toxicall®).Variables evaluated for high call volume conditions were: (1) call duration; (2) number of cases; and (3) number of calls per staff member per 30 minute period. Statistical analyses identified peak periods as busier than 99% of all other 30 minute time periods and low volume periods as slower than 70% of all other 30 minute periods. Case and communication characteristics of high volume and low volume calls were compared using logistic regression. A total of 65,364 incoming calls occurred over 12 months. One hundred high call volume and 4885 low call volume 30 minute periods were identified. High volume periods were more common between 1500 and 2300 hours and during the winter months. Coded verbal communication data were evaluated for 42 high volume and 296 low volume calls. The mean (standard deviation) call length of these calls during high volume and low volume periods was 3 minutes 27 seconds (1 minute 46 seconds) and 3 minutes 57 seconds (2 minutes 11 seconds), respectively. Regression analyses revealed a trend for fewer overall verbal statements and fewer staff questions during peak periods, but no other significant differences for staff-caller communication behaviors were found. Peak activity for poison center call volume can be identified by statistical modeling. Calls during high volume periods were similar to low volume calls. Communication was more concise yet staff was able to maintain a good rapport with callers during busy call periods

Human Factors and Data Fusion as Part of Control Systems Resilience

Energy Technology Data Exchange (ETDEWEB)

David I. Gertman

2009-05-01

Human performance and human decision making is counted upon as a crucial aspect of overall system resilience. Advanced control systems have the potential to provide operators and asset owners a wide range of data, deployed at different levels that can be used to support operator situation awareness. However, the sheer amount of data available can make it challenging for operators to assimilate information and respond appropriately. This paper reviews some of the challenges and issues associated with providing operators with actionable state awareness and argues for the over arching importance of integrating human factors as part of intelligent control systems design and implementation. It is argued that system resilience is improved by implementing human factors in operations and maintenance. This paper also introduces issues associated with resilience and data fusion and highlights areas in which human factors including field studies hold promise.

Production and quality control of concrete for the Rajasthan Atomic Power Station - [Part 2

International Nuclear Information System (INIS)

Singh Roy, P.K.; Sukhtankar, K.D.; Prasad, K.

1975-01-01

The following aspects of the production and quality control of concrete and concrete materials used in the construction of twin-reactor Rajasthan Atomic Power Station are discussed : (1) relationship between strength of cubes and cylinders made of concrete used for the prestressed dome (2) temperature control during pouring of concrete (3) thermal conductivity of heavy concrete (4) various types of grouting procedures used for different structures forming part of reactors (5) quality control of normal and heavy concrete and (6) leakage through form ties. Typical concrete mixes used for grouts are also given. (M.G.B.)

Association of Employee Attributes and Exceptional Performance Rating at a National Center of the US Centers for Disease Control and Prevention, 2011.

Science.gov (United States)

Roberts, Henry; Myles, Ranell L; Truman, Benedict I; Dean, Hazel D

2015-01-01

Employee performance evaluation motivates and rewards exceptional individual performance that advances the achievement of organizational goals. The Centers for Disease Control and Prevention (CDC) and its operating units evaluate employee performance annually and reward exceptional performance with a cash award or quality step increase in pay. A summary performance rating (SPR) of "exceptional" indicated personal achievements in 2011 that were beyond expectations described in the employee's performance plan. To determine whether personal attributes and job setting of civil service employees were associated with an exceptional SPR in National Center for HIV/AIDS, Viral Hepatitis, STD, and TB Prevention (NCHHSTP) in 2011. Data from the CDC 2011 performance management database collected in 2012 were analyzed in 2013 to identify SPR, personal attributes, and job settings of full-time civil service employees. Multivariate logistic regression controlled for confounding and stratified analysis detected effect modifiers of the association between receiving an exceptional SPR in 2011 and gender, race/ethnicity, education, job location, job series, grade level, years in grade, years of federal service, supervisory role, and NCHHSTP division. Among the 1037 employees, exceptional SPR was independently associated with: female gender (adjusted odds ratio: 1.7 [1.3, 2.3]), advanced degrees (doctorate: 1.7 [1.1, 2.5] master's: [1.1, 2.0]), headquarters location (2.8 [1.9, 4.1]), higher pay grade (3.3 [2.4, 4.5]) and years in grade (0-1 years: 1.7 [1.3, 2.4]; 2-4 years: 1.5 [1.1, 2.0]), division level (Division A: 5.0 [2.5, 9.9]; Division B: 5.5 [3.5, 8.8]), and supervisory status (at a lower-pay grade) (odds ratio: 3.7 [1.1, 11.3]). Exceptional SPR is independently associated with personal employee attributes and job settings that are not modifiable by interventions designed to improve employee performance based on accomplishments.

An advanced automation system for operation of Sao Paulo pumping stations from TRANSPETRO Master Control Center - CNCO

Energy Technology Data Exchange (ETDEWEB)

Corcioli, Mario Sergio; Barreto, Camila Maria Benevenuto [TRANSPETRO, Rio de Janeiro, RJ (Brazil)

2009-07-01

Since 2000 the operations of the TRANSPETRO pumping stations in the state of Sao Paulo region began to be transferred from local control centers located at the transfer and storage terminals to the National Operational Control Center (CNCO) of TRANSPETRO, located at the headquarters of the company, in Rio de Janeiro. The proposed paper aims to presenting an overview of the automation system that was developed to enable such pumping stations to be operated from CNCO in a reliable and secure manner, focusing on tools that offer an embedded system alarms completely free of false alarms with automatic determining of the root cause, and also automatic and advanced diagnoses of problems caused by failures of hardware, human error and abnormal conditions of the process, providing the CNCO SCADA system of accurate and quality information that help operators to make decisions. The referred automation system was integrated for the first time to CNCO SCADA system in 2000, for pipeline pumps of Osvat (Sao Sebastiao - Vale do Paraiba pipeline) station at the Sao Sebastiao Terminal - northern coast of Sao Paulo region. (author)

Active Control of Low-Speed Fan Tonal Noise Using Actuators Mounted in Stator Vanes: Part III Results

Science.gov (United States)

Sutliff, Daniel L.; Remington, Paul J.; Walker, Bruce E.

2003-01-01

A test program to demonstrate simplification of Active Noise Control (ANC) systems relative to standard techniques was performed on the NASA Glenn Active Noise Control Fan from May through September 2001. The target mode was the m = 2 circumferential mode generated by the rotor-stator interaction at 2BPF. Seven radials (combined inlet and exhaust) were present at this condition. Several different error-sensing strategies were implemented. Integration of the error-sensors with passive treatment was investigated. These were: (i) an in-duct linear axial array, (ii) an induct steering array, (iii) a pylon-mounted array, and (iv) a near-field boom array. The effect of incorporating passive treatment was investigated as well as reducing the actuator count. These simplified systems were compared to a fully ANC specified system. Modal data acquired using the Rotating Rake are presented for a range of corrected fan rpm. Simplified control has been demonstrated to be possible but requires a well-known and dominant mode signature. The documented results here in are part III of a three-part series of reports with the same base title. Part I and II document the control system and error-sensing design and implementation.

Impact of an Infection Control Program on the Prevalence of Nosocomial Infections at a Tertiary Care Center in Switzerland

OpenAIRE

Ebnöther, Corina; Tanner, Beate; Schmid, Flavia; Rocca, Vittoria La; Heinzer, Ivo; Bregenzer, Thomas

2017-01-01

Objective. To study the impact of a multimodal infection control program on the rate of nosocomial infections at a 550-bed tertiary care center. Methods. Before and after the implementation of an infection control program, the rate of nosocomial infection was recorded in time-interval prevalence studies. Hand hygiene compliance was studied before and after the intervention. As a surrogate marker of compliance, the amount of alcohol-based hand rub consumed before the intervention was compared ...

RELATIONSHIP OF ASSESS SELF-ESTEEM AND LOCUS OF CONTROL WITH QUALITY OF LIFE DURING TREATMENT STAGES IN PATIENTS REFERRING TO DRUG ADDICTION REHABILITATION CENTERS.

Science.gov (United States)

Heidari, Mohammad; Ghodusi, Mansureh

2016-07-24

Thus, the present research was carried out aimed at determining the relationship between self-esteem and locus of control and quality of life during treatment stages in the patients referring to drug addiction rehabilitation centers of Borujen city, Iran. The current study was a sectional research of descriptive correlation type. The research sample was 150 individuals of patients referring to addiction rehabilitation centers of Borujen city. For data gathering, Rosenberg Self-esteem Scale, Rotter's Locus of Control Scale, and SF36 Quality of Life Questionnaire were used. Following collection of questionnaires, the data were analyzed using SPSS/16 software. According to the results, in the 12 th day of treatment, 96 patients exhibited moderate self-esteem, 102 patients had internal locus of control, and the score of their overall quality of life was 40.43±12.71. Furthermore, Pearson's correlation coefficient indicated that a significant and positive relationship was observed between locus of control and quality of life during different treatment stages. It seems that quality of life improves during addiction treatment stages due to improvement of personality traits including locus of control and self-esteem. Therefore, consultation methods as a very crucial priority in addiction rehabilitation centers shall be taken into account by the health sector authorities and managers and can play an essential role in enhancing quality of life.

RELATIONSHIP OF ASSESS SELF-ESTEEM AND LOCUS OF CONTROL WITH QUALITY OF LIFE DURING TREATMENT STAGES IN PATIENTS REFERRING TO DRUG ADDICTION REHABILITATION CENTERS

Science.gov (United States)

Heidari, Mohammad; Ghodusi, Mansureh

2016-01-01

Objective: Thus, the present research was carried out aimed at determining the relationship between self-esteem and locus of control and quality of life during treatment stages in the patients referring to drug addiction rehabilitation centers of Borujen city, Iran. Methods: The current study was a sectional research of descriptive correlation type. The research sample was 150 individuals of patients referring to addiction rehabilitation centers of Borujen city. For data gathering, Rosenberg Self-esteem Scale, Rotter’s Locus of Control Scale, and SF36 Quality of Life Questionnaire were used. Following collection of questionnaires, the data were analyzed using SPSS/16 software. Results: According to the results, in the 12th day of treatment, 96 patients exhibited moderate self-esteem, 102 patients had internal locus of control, and the score of their overall quality of life was 40.43±12.71. Furthermore, Pearson’s correlation coefficient indicated that a significant and positive relationship was observed between locus of control and quality of life during different treatment stages. Conclusion: It seems that quality of life improves during addiction treatment stages due to improvement of personality traits including locus of control and self-esteem. Therefore, consultation methods as a very crucial priority in addiction rehabilitation centers shall be taken into account by the health sector authorities and managers and can play an essential role in enhancing quality of life. PMID:27698598

Experimental and Computational Instrumentation for Rotorcraft Noise and Vibration Control Research at the Penn State Rotorcraft Center

National Research Council Canada - National Science Library

Smith, Edward

2001-01-01

A team of faculty at the Penn State Rotorcraft Center of Excellence has integrated five new facilities into a broad range of research and educational programs focused on rotorcraft noise and vibration control...

Clinical relevance of surgical site infection as defined by the criteria of the Centers for Disease Control and Prevention

DEFF Research Database (Denmark)

Henriksen, N A; Meyhoff, C S; Wetterslev, J

2010-01-01

Surgical site infection (SSI) is a common complication after abdominal surgery and the Centers for Disease Control and Prevention (CDC) criteria are commonly used for diagnosis and surveillance. The aim of this study was to evaluate whether SSI diagnosed according to CDC is clinically relevant (C...... a suitable standard definition for monitoring and identifying SSI, even if some cases of less clinically significant superficial SSI are included.......Surgical site infection (SSI) is a common complication after abdominal surgery and the Centers for Disease Control and Prevention (CDC) criteria are commonly used for diagnosis and surveillance. The aim of this study was to evaluate whether SSI diagnosed according to CDC is clinically relevant...... hospital stay or referral to an intensive care unit for SSI. The rate of CRSSI was 38 of 54 (70%) in patients with CDC-diagnosed SSI and none in patients without a CDC-diagnosed SSI. Sixty-one percent of the CDC-diagnosed SSIs were superficial, of which 48% were considered clinically relevant...

The importance of interpersonal communication in poison centers.

Science.gov (United States)

Crouch, B I; Thomas, K C; Rothwell, E; Planalp, S; Ellington, L; Teemant, K

2013-11-01

Poison control center (PCC) personnel face many challenges in communicating with callers and with each other. The purpose of this study was to identify interpersonal communication issues that affect the work environment within PCCs. As part of a larger questionnaire study distributed electronically to members of the American Association of Poison Control Centers (AAPCC) to assess communication training needs for PCCs, three questions were included to assess interpersonal communication within the work environment: (1) How important is interpersonal communication within your center to a positive work environment? (not at all to extremely important, 1-7); (2) How disruptive is interpersonal communication to your work? (not at all to extremely disruptive, 1-7); and (3) What communication issues do you find most disruptive to your work? (free-text response). Descriptive and qualitative content analyses were used to identify themes in responses. A total of 537 responses were received from SPIs, directors, medical directors, and other PCC staff. Interpersonal communication within the PCC was rated as extremely important to a positive work environment (median = 7 and IQR = 6-7; 62.3% rated as extremely important). Interpersonal communication was rated as less than moderately disruptive on average (median = 3 and IQR = 2-4). Free-text responses were received from 335 (62%) respondents. Free-text comments were broadly categorized as relating to PCC personnel and work environment and issues related to PCC callers. Categories that emerged from the PCC personnel and work environment category included the following: poor interpersonal communication (n = 104; 31%); background noise (n = 96; 29%); poor work procedures (n = 51; 15%); and poor management communication (n = 38; 11%). Interpersonal communication within PCCs was considered to be important for a positive work environment. Although not found to be strongly disruptive by most respondents, several specific interpersonal

The Impact of Wireless Technology on Order Selection Audits at an Auto Parts Distribution Center

Science.gov (United States)

Goomas, David T.

2012-01-01

Audits of store order pallets or totes performed by auditors at five distribution centers (two experimental and three comparison distribution centers) were used to check for picking accuracy prior to being loaded onto a truck for store delivery. Replacing the paper audits with wireless handheld computers that included immediate auditory and visual…

Functional capacity, independence and home affordances of premature children attending daycare centers

Directory of Open Access Journals (Sweden)

Marcela Tamiasso Vieira

Full Text Available Abstract Introduction: Child development is the result of the interaction between biological and environmental factors. Objective: The aim of this study is to evaluate and compare the Functional Capacity, Independence and Home Affordances Level of Stimulation of premature children between 18 and 42 months, attending or not daycare centers. Methods: Cross-sectional study with a convenience sample of 26 premature children between 18 and 42 months, paired and divided into two groups: attending (study group and not attending daycare centers (control group. Data was collected from the questionnaires AHEMD-SR, PEDI and an identification questionnaire. Data analysis was performed by descriptive statistics, and Chi-square, Fisher, Mann-Whitney and Univariate Analysis tests, considering the level of significance of α = 0.05 and tendency of differentiation when α < 010. Results: There was a significant difference in the AHEMD-SR`s Variety of Stimulation (p = 0.036, higher in the control group, and tendency in the Gross Motor Toys (p = 0.086, more available in the study group. In PEDI, there was significant difference in Self-care (p = 0.045 and tendency of differentiation in Mobility (0.068, both of the Caregiver Assistance part (greater to the study. The sample showed low stimulation opportunities regarding Fine and Gross Motor Toys and high percentages of delay in Functional Skills (Mobility and Independence (Self Care and Mobility, especially in the control group. Conclusion: Daycare centers seem to positively affect the Functional Capacity and Independence in premature children between 18 and 42 months.

Study of On-Ramp PI Controller Based on Dural Group QPSO with Different Well Centers Algorithm

Directory of Open Access Journals (Sweden)

Tao Wu

2015-01-01

Full Text Available A novel quantum-behaved particle swarm optimization (QPSO algorithm, dual-group QPSO with different well centers (DWC-QPSO algorithm, is proposed by constructing the master-slave subswarms. The new algorithm was applied in the parameter optimization of on-ramp traffic PI controller combining with nonlinear feedback theory. With the critical information contained in the searching space and results of the basic QPSO algorithm, this algorithm avoids the rapid disappearance of swarm diversity and enhances the global searching ability through collaboration between subswarms. Experiment results on an on-ramp traffic control simulation show that DWC-QPSO can be well applied in the study of on-ramp traffic PI controller and the comparison results illustrate that DWC-QPSO outperforms other evolutionary algorithms with enhancement in both adaptability and stability.

Environmental Analysis of the Groningen City Center

OpenAIRE

GÓMEZ BUGEDA, RICARDO SANTIAGO

2017-01-01

This final thesis project is part of the research that is carrying out by the Gemeente Groningen in order to make the city center more sustainable and livable. The municipality of Groningen has recently published a conceptual development plan for improving the inner-city of Groningen, this report is called Bestemming Binnenstad 01/2016 . The main focus of this report is convert the city center to an environmental friendly downtown, reducing pollution, reroute public and private transpo...

Tunable, Flexible and Efficient Optimization of Control Pulses for Superconducting Qubits, part II - Applications

Science.gov (United States)

AsséMat, Elie; Machnes, Shai; Tannor, David; Wilhelm-Mauch, Frank

In part I, we presented the theoretic foundations of the GOAT algorithm for the optimal control of quantum systems. Here in part II, we focus on several applications of GOAT to superconducting qubits architecture. First, we consider a control-Z gate on Xmons qubits with an Erf parametrization of the optimal pulse. We show that a fast and accurate gate can be obtained with only 16 parameters, as compared to hundreds of parameters required in other algorithms. We present numerical evidences that such parametrization should allow an efficient in-situ calibration of the pulse. Next, we consider the flux-tunable coupler by IBM. We show optimization can be carried out in a more realistic model of the system than was employed in the original study, which is expected to further simplify the calibration process. Moreover, GOAT reduced the complexity of the optimal pulse to only 6 Fourier components, composed with analytic wrappers.

Use of statistic control of the process as part of a quality assurance plan; Empleo del control estadistico de proceso como parte de un plan de aseguramiento de la calidad

Energy Technology Data Exchange (ETDEWEB)

Acosta, S.; Lewis, C., E-mail: sacosta@am.gob.ar [Autoridad Regulatoria Nuclear (ARN), Buenos Aires (Argentina)

2013-07-01

One of the technical requirements of the standard IRAM ISO 17025 for the accreditation of testing laboratories, is the assurance of the quality of the results through the control and monitoring of the factors influencing the reliability of them. The grade the factors contribute to the total measurement uncertainty, determines which of them should be considered when developing a quality assurance plan. The laboratory of environmental measurements of strontium-90 in the accreditation process, performs most of its determinations in samples with values close to the detection limit. For this reason the correct characterization of the white, is a critical parameter and is verified through a letter for statistical process control. The scope of the present work is concerned the control of whites and so it was collected a statistically significant amount of data, for a period of time that is covered of different conditions. This allowed consider significant variables in the process, such as temperature and humidity, and build a graph of white control, which forms the basis of a statistical process control. The data obtained were lower and upper limits for the preparation of the charter white control. In this way the process of characterization of white was considered to operate under statistical control and concludes that it can be used as part of a plan of insurance of the quality.

Solution of task related to control of swiss-type automatic lathe to get planes parallel to part axis

Science.gov (United States)

Tabekina, N. A.; Chepchurov, M. S.; Evtushenko, E. I.; Dmitrievsky, B. S.

2018-05-01

The work solves the problem of automation of machining process namely turning to produce parts having the planes parallel to an axis of rotation of part without using special tools. According to the results, the availability of the equipment of a high speed electromechanical drive to control the operative movements of lathe machine will enable one to get the planes parallel to the part axis. The method of getting planes parallel to the part axis is based on the mathematical model, which is presented as functional dependency between the conveying velocity of the driven element and the time. It describes the operative movements of lathe machine all over the tool path. Using the model of movement of the tool, it has been found that the conveying velocity varies from the maximum to zero value. It will allow one to carry out the reverse of the drive. The scheme of tool placement regarding the workpiece has been proposed for unidirectional movement of the driven element at high conveying velocity. The control method of CNC machines can be used for getting geometrically complex parts on the lathe without using special milling tools.

[Cocaine base paste: experience from the Montevideo Poison Control Center].

Science.gov (United States)

Pascale, Antonio; Negrin, Alba; Laborde, Amalia

2010-01-01

In Uruguay, cocaine base paste (CBP, pasta base) is a widely used form of cocaine. The aim of our study is to determine the main clinical characteristics of CBP abusers. Retrospective, single-center study of consultations at the Montevideo Poison Control Center between January 1, 2004 and December 31, 2005. One hundred and thirteen consultations were included, with an average age of 22 years (+ - 0.5 years) and a female-male sex ratio of 1:4.3. The consultations were related to drug overdose (77%), suicide attempt (16.8%), and wanting to give up CBP use (6.2%). In 48.1% the time elapsed since inhalation of CBP was less than 6 hours. Doses varied between 0.5 gr. and 25 gr. Use of other drugs at the same time, such as alcohol, marijuana or benzodiazepines, was common (51 cases). The symptoms most frequently observed were neuropsychiatric and cardiovascular, followed by respiratory symptoms. In 16.8% of patients, reason for the consultation was intentional acute ingestion of drugs, considered as a suicide attempt, occurring within a few hours of drug consumption. CBP users are mostly young males. Although clinical findings are compatible with those for cocaine abuse, euphoria is a major clinical feature in CBP abusers. The presence of respiratory symptoms reflects the complications associated with the ingestion route. Suicide attempts occurring within a few hours of CBP confirm the high prevalence of suicidal ideation reported by other authors. cocaine base paste, clinical features, suicide attempts.

Guidelines for quality assurance and quality control of fish taxonomic data collected as part of the National Water-Quality Assessment Program

Science.gov (United States)

Walsh, Stephen Joseph; Meador, Michael R.

1998-01-01

Fish community structure is characterized by the U.S. Geological Survey's National Water-Quality Assessment (NAWQA) Program as part of a perennial, multidisciplinary approach to evaluating the physical, chemical, and biological conditions of the Nation's water resources. The objective of quality assurance and quality control of fish taxonomic data that are collected as part of the NAWQA Program is to establish uniform guidelines and protocols for the identification, processing, and archiving of fish specimens to ensure that accurate and reliable data are collected. Study unit biologists, collaborating with regional biologists and fish taxonomic specialists, prepare a pre-sampling study plan that includes a preliminary faunal list and identification of an ichthyological curation center for receiving preserved fish specimens. Problematic taxonomic issues and protected taxa also are identified in the study plan, and collecting permits are obtained in advance of sampling activities. Taxonomic specialists are selected to identify fish specimens in the field and to assist in determining what fish specimens should be sacrificed, fixed, and preserved for laboratory identification, independent taxonomic verification, and long-term storage in reference or voucher collections. Quantitative and qualitative sampling of fishes follows standard methods previously established for the NAWQA Program. Common ichthyological techniques are used to process samples in the field and prepare fish specimens to be returned to the laboratory or sent to an institutional repository. Taxonomic identifications are reported by using a standardized list of scientific names that provides nomenclatural consistency and uniformity across study units.

77 FR 58397 - Advisory Committee to the Director (ACD), Centers for Disease Control and Prevention-Ethics...

Science.gov (United States)

2012-09-20

... Committee to the Director (ACD), Centers for Disease Control and Prevention--Ethics Subcommittee (ES) In..., regarding a broad range of public health ethics questions and issues arising from programs, scientists and practitioners. Matters To Be Discussed: Agenda items will include the following topics: Ethical considerations...

Effects of long-term wearing of high-heeled shoes on the control of the body's center of mass motion in relation to the center of pressure during walking.

Science.gov (United States)

Chien, Hui-Lien; Lu, Tung-Wu; Liu, Ming-Wei

2014-04-01

High-heeled shoes are associated with instability and falling, leading to injuries such as fracture and ankle sprain. This study investigated the effects of habitual wearing of high-heeled shoes on the body's center of mass (COM) motion relative to the center of pressure (COP) during gait. Fifteen female experienced wearers and 15 matched controls walked with high-heeled shoes (7.3cm) while kinematic and ground reaction force data were measured and used to calculate temporal-distance parameters, joint moments, COM-COP inclination angles (IA) and the rate of IA changes (RCIA). Compared with inexperienced wearers, experienced subjects showed significantly reduced frontal IA with increased ankle pronator moments during single-limb support (pheel-strike, and reduced DLS time (pheel-strike (pknee extensor moments at toe-off (pheeled shoes, providing a basis for future design of strategies to minimize the risk of falling during high-heeled gait. Copyright © 2014 Elsevier B.V. All rights reserved.

A linguistic study of patient-centered interviewing: emergent interactional effects.

Science.gov (United States)

Hesson, Ashley M; Sarinopoulos, Issidoros; Frankel, Richard M; Smith, Robert C

2012-09-01

To evaluate interactional effects of patient-centered interviewing (PCI) compared to isolated clinician-centered interviewing (CCI). We conducted a pilot study comparing PCI (N=4) to CCI (N=4) for simulated new-patient visits. We rated interviews independently and measured patient satisfaction with the interaction via a validated questionnaire. We conducted interactional sociolinguistic analysis on the interviews and compared across three levels of analysis: turn, topic, and interaction. We found significant differences between PCI and CCI in physician responses to patients' psychosocial cues and concerns. The number and type of physician questions also differed significantly across PCI and CCI sets. Qualitatively, we noted several indicators of physician-patient attunement in the PCI interviews that were not present in the CCI interviews. They spanned diverse aspects of physician and patient speech, suggesting interactional accommodation on the part of both participants. This small pilot study highlights a variety of interactional variables that may underlie the effects associated with patient-centered interviewing (e.g., positive relationships, health outcomes). Question form, phonological accommodation processes, and use of stylistic markers are relatively unexplored in controlled studies of physician-patient interaction. This study characterizes several interactional variables for larger scale studies and contributes to models of patient-centeredness in practice. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

14 CFR Appendix I to Part 25 - Installation of an Automatic Takeoff Thrust Control System (ATTCS)

Science.gov (United States)

2010-01-01

... Appendix I to Part 25—Installation of an Automatic Takeoff Thrust Control System (ATTCS) I25.1General. (a... crew to increase thrust or power. I25.2Definitions. (a) Automatic Takeoff Thrust Control System (ATTCS... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Installation of an Automatic Takeoff Thrust...

Contamination Control and Hardware Processing Solutions at Marshall Space Flight Center

Science.gov (United States)

Burns, DeWitt H.; Hampton, Tammy; Huey, LaQuieta; Mitchell, Mark; Norwood, Joey; Lowrey, Nikki

2012-01-01

The Contamination Control Team of Marshall Space Flight Center's Materials and Processes Laboratory supports many Programs/ Projects that design, manufacture, and test a wide range of hardware types that are sensitive to contamination and foreign object damage (FOD). Examples where contamination/FOD concerns arise include sensitive structural bondline failure, critical orifice blockage, seal leakage, and reactive fluid compatibility (liquid oxygen, hydrazine) as well as performance degradation of sensitive instruments or spacecraft surfaces such as optical elements and thermal control systems. During the design phase, determination of the sensitivity of a hardware system to different types or levels of contamination/FOD is essential. A contamination control and FOD control plan must then be developed and implemented through all phases of ground processing, and, sometimes, on-orbit use, recovery, and refurbishment. Implementation of proper controls prevents cost and schedule impacts due to hardware damage or rework and helps assure mission success. Current capabilities are being used to support recent and on-going activities for multiple Mission Directorates / Programs such as International Space Station (ISS), James Webb Space Telescope (JWST), Space Launch System (SLS) elements (tanks, engines, booster), etc. The team also advances Green Technology initiatives and addresses materials obsolescence issues for NASA and external customers, most notably in the area of solvent replacement (e.g. aqueous cleaners containing hexavalent chrome, ozone depleting chemicals (CFC s and HCFC's), suspect carcinogens). The team evaluates new surface cleanliness inspection and cleaning technologies (e.g. plasma cleaning), and maintains databases for processing support materials as well as outgassing and optical compatibility test results for spaceflight environments.

3-D conformal radiation therapy - Part II: Computer-controlled 3-D treatment delivery

International Nuclear Information System (INIS)

Benedick, A.

1997-01-01

Purpose/Objective: This course will describe the use of computer-controlled treatment delivery techniques for treatment of patients with sophisticated conformal therapy. In particular, research and implementation issues related to clinical use of computer-controlled conformal radiation therapy (CCRT) techniques will be discussed. The possible/potential advantages of CCRT techniques will be highlighted using results from clinical 3-D planning studies. Materials and Methods: In recent years, 3-D treatment planning has been used to develop and implement 3-D conformal therapy treatment techniques, and studies based on these conformal treatments have begun to show the promise of conformal therapy. This work has been followed by the development of commercially-available multileaf collimator and computer control systems for treatment machines. Using these (and other) CCRT devices, various centers are beginning to clinically use complex computer-controlled treatments. Both research and clinical CCRT treatment techniques will be discussed in this presentation. General concepts and requirements for CCRT will be mentioned. Developmental and clinical experience with CCRT techniques from a number of centers will be utilized. Results: Treatment planning, treatment preparation and treatment delivery must be approached in an integrated fashion in order to clinically implement CCRT treatment techniques, and the entire process will be discussed. Various CCRT treatment methodologies will be reviewed from operational, dosimetric, and technical points of view. The discussion will concentrate on CCRT techniques which are likely to see rather wide dissemination over the next several years, including particularly the use of multileaf collimators (MLC), dynamic and segmental conformal therapy, conformal field shaping, and other related techniques. More advanced CCRT techniques, such as the use of individualized intensity modulation of beams or segments, and the use of computer-controlled

Activities of the Center for Space Construction

Science.gov (United States)

1993-01-01

The Center for Space Construction (CSC) at the University of Colorado at Boulder is one of eight University Space Engineering Research Centers established by NASA in 1988. The mission of the center is to conduct research into space technology and to directly contribute to space engineering education. The center reports to the Department of Aerospace Engineering Sciences and resides in the College of Engineering and Applied Science. The college has a long and successful track record of cultivating multi-disciplinary research and education programs. The Center for Space Construction is prominent evidence of this record. At the inception of CSC, the center was primarily founded on the need for research on in-space construction of large space systems like space stations and interplanetary space vehicles. The scope of CSC's research has now evolved to include the design and construction of all spacecraft, large and small. Within this broadened scope, our research projects seek to impact the underlying technological basis for such spacecraft as remote sensing satellites, communication satellites, and other special purpose spacecraft, as well as the technological basis for large space platforms. The center's research focuses on three areas: spacecraft structures, spacecraft operations and control, and regolith and surface systems. In the area of spacecraft structures, our current emphasis is on concepts and modeling of deployable structures, analysis of inflatable structures, structural damage detection algorithms, and composite materials for lightweight structures. In the area of spacecraft operations and control, we are continuing our previous efforts in process control of in-orbit structural assembly. In addition, we have begun two new efforts in formal approach to spacecraft flight software systems design and adaptive attitude control systems. In the area of regolith and surface systems, we are continuing the work of characterizing the physical properties of lunar

75 FR 30409 - Advisory Committee to the Director (ACD), Centers for Disease Control and Prevention-Ethics...

Science.gov (United States)

2010-06-01

... Committee to the Director (ACD), Centers for Disease Control and Prevention--Ethics Subcommittee (ES) In... to the ACD, CDC, regarding a broad range of public health ethics questions and issues arising from... address public health ethics issues and coordination of these efforts with the CDC Office of State, Tribal...

Actions Needed to Ensure Scientific and Technical Information is Adequately Reviewed at Goddard Space Flight Center, Johnson Space Center, Langley Research Center, and Marshall Space Flight Center

Science.gov (United States)

2008-01-01

This audit was initiated in response to a hotline complaint regarding the review, approval, and release of scientific and technical information (STI) at Johnson Space Center. The complainant alleged that Johnson personnel conducting export control reviews of STI were not fully qualified to conduct those reviews and that the reviews often did not occur until after the STI had been publicly released. NASA guidance requires that STI, defined as the results of basic and applied scientific, technical, and related engineering research and development, undergo certain reviews prior to being released outside of NASA or to audiences that include foreign nationals. The process includes technical, national security, export control, copyright, and trade secret (e.g., proprietary data) reviews. The review process was designed to preclude the inappropriate dissemination of sensitive information while ensuring that NASA complies with a requirement of the National Aeronautics and Space Act of 1958 (the Space Act)1 to provide for the widest practicable and appropriate dissemination of information resulting from NASA research activities. We focused our audit on evaluating the STI review process: specifically, determining whether the roles and responsibilities for the review, approval, and release of STI were adequately defined and documented in NASA and Center-level guidance and whether that guidance was effectively implemented at Goddard Space Flight Center, Johnson Space Center, Langley Research Center, and Marshall Space Flight Center. Johnson was included in the review because it was the source of the initial complaint, and Goddard, Langley, and Marshall were included because those Centers consistently produce significant amounts of STI.

Launch Vehicle Manual Steering with Adaptive Augmenting Control In-flight Evaluations Using a Piloted Aircraft

Science.gov (United States)

Hanson, Curt

2014-01-01

An adaptive augmenting control algorithm for the Space Launch System has been developed at the Marshall Space Flight Center as part of the launch vehicles baseline flight control system. A prototype version of the SLS flight control software was hosted on a piloted aircraft at the Armstrong Flight Research Center to demonstrate the adaptive controller on a full-scale realistic application in a relevant flight environment. Concerns regarding adverse interactions between the adaptive controller and a proposed manual steering mode were investigated by giving the pilot trajectory deviation cues and pitch rate command authority.

Simulations and Experiments on Vibration Control of Aerospace Thin-Walled Parts via Preload

Directory of Open Access Journals (Sweden)

Qiong Wu

2017-01-01

Full Text Available Thin-walled parts primarily comprise the entire piece of rough machining, and the material removal rate can surpass 95%. Numerous components with thin-walled structures are preferred in the aerospace industry for their light weight, high strength, and other advantages. In aerospace thin-walled workpiece machining processes and practical applications, they are excited by the vibration. The preload changing the modal stiffness of the part is found and this change causes continuous changes in the natural frequency. Researching on the influence of pretightening force on dynamic characteristics of thin-walled components is highly significant for controlling vibration. In this study, the typical aviation thin-walled part is the research object. Finite element numerical simulation and experimental verification are employed to analyze the dynamic characteristics of 7075 aluminum alloy thin-walled plates under different preloads for exploring the relationship between natural frequency and preload. The relationship is validated by comparative results. Both the simulation and experimental results show that the natural frequencies of plates increase following the augmentation of the preload. Thus, this research introduces the method where vibration of aerospace thin-walled parts is reduced by preload. For practical engineering application, a program showing the relationship between natural frequency and preload is written using Visual Basic language.

30 CFR 90.301 - Respirable dust control plan; approval by District Manager; copy to part 90 miner.

Science.gov (United States)

2010-07-01

... District Manager; copy to part 90 miner. 90.301 Section 90.301 Mineral Resources MINE SAFETY AND HEALTH... control plan; approval by District Manager; copy to part 90 miner. (a) The District Manager will approve... District Manager shall consider whether: (1) The respirable dust control measures would be likely to...

Status Report on the Development of Micro-Scheduling Software for the Advanced Outage Control Center Project

Energy Technology Data Exchange (ETDEWEB)

Germain, Shawn St. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Thomas, Kenneth [Idaho National Lab. (INL), Idaho Falls, ID (United States); Farris, Ronald [Idaho National Lab. (INL), Idaho Falls, ID (United States); Joe, Jeffrey [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2014-09-01

The long-term viability of existing nuclear power plants (NPPs) in the United States (U.S.) is dependent upon a number of factors, including maintaining high capacity factors, maintaining nuclear safety, and reducing operating costs, particularly those associated with refueling outages. Refueling outages typically take 20-30 days, and for existing light water NPPs in the U.S., the reactor cannot be in operation during the outage. Furthermore, given that many NPPs generate between $1-1.5 million/day in revenue when in operation, there is considerable interest in shortening the length of refueling outages. Yet, refueling outages are highly complex operations, involving multiple concurrent and dependent activities that are difficult to coordinate. Finding ways to improve refueling outage performance while maintaining nuclear safety has proven to be difficult. The Advanced Outage Control Center project is a research and development (R&D) demonstration activity under the Light Water Reactor Sustainability (LWRS) Program. LWRS is a R&D program which works with industry R&D programs to establish technical foundations for the licensing and managing of long-term, safe, and economical operation of current NPPs. The Advanced Outage Control Center project has the goal of improving the management of commercial NPP refueling outages. To accomplish this goal, this INL R&D project is developing an advanced outage control center (OCC) that is specifically designed to maximize the usefulness of communication and collaboration technologies for outage coordination and problem resolution activities. This report describes specific recent efforts to develop a capability called outage Micro-Scheduling. Micro-Scheduling is the ability to allocate and schedule outage support task resources on a sub-hour basis. Micro-Scheduling is the real-time fine-tuning of the outage schedule to react to the actual progress of the primary outage activities to ensure that support task resources are

Vehicle parts detection based on Faster - RCNN with location constraints of vehicle parts feature point

Science.gov (United States)

Yang, Liqin; Sang, Nong; Gao, Changxin

2018-03-01

Vehicle parts detection plays an important role in public transportation safety and mobility. The detection of vehicle parts is to detect the position of each vehicle part. We propose a new approach by combining Faster RCNN and three level cascaded convolutional neural network (DCNN). The output of Faster RCNN is a series of bounding boxes with coordinate information, from which we can locate vehicle parts. DCNN can precisely predict feature point position, which is the center of vehicle part. We design an output strategy by combining these two results. There are two advantages for this. The quality of the bounding boxes are greatly improved, which means vehicle parts feature point position can be located more precise. Meanwhile we preserve the position relationship between vehicle parts and effectively improve the validity and reliability of the result. By using our algorithm, the performance of the vehicle parts detection improve obviously compared with Faster RCNN.

Dynamic Stability of Cylindrical Shells under Moving Loads by Applying Advanced Controlling Techniques—Part II: Using Piezo-Stack Control

Directory of Open Access Journals (Sweden)

Khaled M. Saadeldin Eldalil

2009-01-01

Full Text Available The load acting on the actively controlled cylindrical shell under a transient pressure pulse propelling a moving mass (gun case has been experimentally studied. The concept of using piezoelectric stack and stiffener combination is utilized for damping the tube wall radial and circumferential deforming vibrations, in the correct meeting location timing of the moving mass. The experiment was carried out by using the same stiffened shell tube of the experimental 14 mm gun tube facility which is used in part 1. Using single and double stacks is tried at two pressure levels of low-speed modes, which have response frequencies adapted with the used piezoelectric stacks characteristics. The maximum active damping ratio is occurred at high-pressure level. The radial circumferential strains are measured by using high-frequency strain gage system in phase with laser beam detection system similar to which used in part 1. Time resolved strain measurements of the wall response were obtained, and both precursor and transverse hoop strains have been resolved. A complete comparison had been made between the effect of active controlled and stepped structure cases, which indicate a significant attenuation ratio especially at higher operating pressures.

cGAS-mediated control of blood-stage malaria promotes Plasmodium-specific germinal center responses.

Science.gov (United States)

Hahn, William O; Butler, Noah S; Lindner, Scott E; Akilesh, Holly M; Sather, D Noah; Kappe, Stefan Hi; Hamerman, Jessica A; Gale, Michael; Liles, W Conrad; Pepper, Marion

2018-01-25

Sensing of pathogens by host pattern recognition receptors is essential for activating the immune response during infection. We used a nonlethal murine model of malaria (Plasmodium yoelii 17XNL) to assess the contribution of the pattern recognition receptor cyclic GMP-AMP synthase (cGAS) to the development of humoral immunity. Despite previous reports suggesting a critical, intrinsic role for cGAS in early B cell responses, cGAS-deficient (cGAS-/-) mice had no defect in the early expansion or differentiation of Plasmodium-specific B cells. As the infection proceeded, however, cGAS-/- mice exhibited higher parasite burdens and aberrant germinal center and memory B cell formation when compared with littermate controls. Antimalarial drugs were used to further demonstrate that the disrupted humoral response was not B cell intrinsic but instead was a secondary effect of a loss of parasite control. These findings therefore demonstrate that cGAS-mediated innate-sensing contributes to parasite control but is not intrinsically required for the development of humoral immunity. Our findings highlight the need to consider the indirect effects of pathogen burden in investigations examining how the innate immune system affects the adaptive immune response.

Tobacco control and gender in south-east Asia. Part II: Singapore and Vietnam.

Science.gov (United States)

Morrow, Martha; Barraclough, Simon

2003-12-01

In the World Health Organization's Western Pacific Region, being born male is the single greatest risk marker for tobacco use. While the literature demonstrates that risks associated with tobacco use may vary according to sex, gender refers to the socially determined roles and responsibilities of men and women, who initiate, continue and quit using tobacco for complex and often different reasons. Cigarette advertising frequently appeals to gender roles. Yet tobacco control policy tends to be gender-blind. Using a broad, gender-sensitivity framework, this contradiction is explored in four Western Pacific countries. Part I of the study presented the rationale, methodology and design of the study, discussed issues surrounding gender and tobacco, and analysed developments in Malaysia and the Philippines (see the previous issue of this journal). Part II deals with Singapore and Vietnam. In all four countries gender was salient for the initiation and maintenance of smoking. Yet, with a few exceptions, gender was largely unrecognized in control policy. Suggestions for overcoming this weakness in order to enhance tobacco control are made.

Project of a PET center at IEN-Rio de Janeiro

International Nuclear Information System (INIS)

Santos, G.R.; Suita, J.C.

2001-01-01

Full text: The Institute of Nuclear Engineering plans to establish a cyclotron-PET facility for production of positron emitting radionuclide for nuclear medicine. Indeed, this facility is part of a bigger project: the first PET Center in Brazil. It is envisioned that this Center would play a central role in the introduction to the region modern technologies in nuclear medicine based on PET radiopharmaceuticals. The problem to be addressed is to gather sufficient conditions to setting up the PET Center. Specifically, the IAEA's assistance would be indispensable to financing the proper equipment's for positron emitter radioisotopes' production, synthesis, labeling, and quality control. The IAEA's assistance would be also valuable in personnel training, as well as researcher's interchange and technical cooperation. With the IAEA's assistance, the PET Center project, already started, would gain a considerable impulse to its conclusion. The IAEA would be of greatly contributing to the improvement of the Brazilians' health care. This contribution takes account that the lEN's PET Center would be offering last generation exams and diagnosis, based on nuclear techniques. Therefore, the IEN is requesting the co-operation of the IAEA to set-up such a facility. The way of that requesting is strictly ordinary, and follows the logical framework structure for project elaboration. The first version of that project is now presented in its original form. From that is possible to extract a resumed table with the fundamental of logical framework, as well as consistence verification by a characteristic check list. Obviously some improvements must be done, and it will be performed before deadline. This way, by the end of 2004, the IEN hopes to be contributing in many application areas, and with Brazilian's health care system, by making available last generation techniques of diagnosis, becoming a center of reference in Latin America. (author)

Electric Power Research Institute: Environmental Technology Control Center, report to the Steering committee. Final technical report

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-04-01

This report describes test for air pollution control of flue gas and mercury as a result of coal combustion. The NYSEG Kintigh Station provided flue gas to the Center 100% of the time during this performance period. As the Kintigh Station operated with a variety of coals, fluctuations in the Center`s inlet SO{sub 2} concentrations were experienced. Safety training for the month was conducted by the O&M Superintendent, Maintenance Supervisor and Shift Supervisors. {open_quotes}Personal Protective Equipment{close_quotes} was the topic of the month. Inspections of the ECTC Facility and safety equipment (SCR air-packs, fire extinguishers, etc.) were completed and recorded this month. All systems were found to be in good condition. By continuing to emphasize safe work habits at the Center, we have raised the total number of days without a lost time injury to 1426 as of 4/30/96. The monthly safety meeting with the NYSEG Kintigh Station was held on April 30, 1996 with both NYSEG and ECTC representatives. The topics of discussion included an overview of NYSEG`s upcoming alternate fuel burn, an update on plant staffing changes, and a discussion of future safety training activities.

Iron ore sintering. Part 3: Automatic and control systems

Directory of Open Access Journals (Sweden)

Alejandro Cores

2015-01-01

Full Text Available El proceso de sinterización implica un gran número de parámetros, más de quinientos, cada uno de los cuales ejerce una mayor o menor influencia y necesita ser controlado, dentro de los límites posibles, con el fin de optimizar la productividad, la estabilidad del proceso, y la composición y la calidad de la sinterizado producido. Para cumplir con la legislación ambiental, un sistema de control de la contaminación debe monitorizar la composición de las partículas y los gases generados en la planta de sinterización y emitidos a la atmósfera. Los sistemas de automatización y control son herramientas vitales para ayudar a los operadores de la planta en el seguimiento de cada etapa del proceso de producción de sinterizado.

Electronic Cigarette Exposure: Calls to Wisconsin Poison Control Centers, 2010–2015.

Science.gov (United States)

Weiss, Debora; Tomasallo, Carrie D; Meiman, Jon G; Creswell, Paul D; Melstrom, Paul C; Gummin, David D; Patel, Disa J; Michaud, Nancy T; Sebero, Heather A; Anderson, Henry A

2016-12-01

E-cigarettes are battery-powered devices that deliver nicotine and flavorings by aerosol and have been marketed in the United States since 2007. Because e-cigarettes have increased in popularity, toxicity potential from device misuse and malfunction also has increased. National data indicate that during 2010–2014, exposure calls to US poison control centers increased only 0.3% for conventional cigarette exposures, whereas calls increased 41.7% for e-cigarette exposures. We characterized cigarette and e-cigarette exposure calls to the Wisconsin Poison Center January 1, 2010 through October 10, 2015. We compared cigarette and e-cigarette exposure calls by exposure year, demographic characteristics, caller site, exposure site, exposure route, exposure reason, medical outcome, management site, and level of care at a health care facility. During January 2010 to October 2015, a total of 98 e-cigarette exposure calls were reported, and annual exposure calls increased approximately 17-fold, from 2 to 35. During the same period, 671 single-exposure cigarette calls with stable annual call volumes were reported. E-cigarette exposure calls were associated with children aged ≤5 years (57/98, 58.2%) and adults aged ≥20 years (30/98, 30.6%). Cigarette exposure calls predominated among children aged ≤5 years (643/671, 95.8%). The frequency of e-cigarette exposure calls to the Wisconsin Poison Center has increased and is highest among children aged ≤5 years and adults. Strategies are warranted to prevent future poisonings from these devices, including nicotine warning labels and public advisories to keep e-cigarettes away from children.

Export Control Guide: Loose Parts Monitoring Systems for Nuclear Power Plants

Energy Technology Data Exchange (ETDEWEB)

Langenberg, Donald W. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2012-12-01

This report describes a typical LPMS, emphasizing its application to the RCS of a modern NPP. The report also examines the versatility of AE monitoring technology by describing several nuclear applications other than loose parts monitoring, as well as some non-nuclear applications. In addition, LPMS implementation requirements are outlined, and LPMS suppliers are identified. Finally, U.S. export controls applicable to LPMSs are discussed.

Use of statistic control of the process as part of a quality assurance plan

International Nuclear Information System (INIS)

Acosta, S.; Lewis, C.

2013-01-01

One of the technical requirements of the standard IRAM ISO 17025 for the accreditation of testing laboratories, is the assurance of the quality of the results through the control and monitoring of the factors influencing the reliability of them. The grade the factors contribute to the total measurement uncertainty, determines which of them should be considered when developing a quality assurance plan. The laboratory of environmental measurements of strontium-90 in the accreditation process, performs most of its determinations in samples with values close to the detection limit. For this reason the correct characterization of the white, is a critical parameter and is verified through a letter for statistical process control. The scope of the present work is concerned the control of whites and so it was collected a statistically significant amount of data, for a period of time that is covered of different conditions. This allowed consider significant variables in the process, such as temperature and humidity, and build a graph of white control, which forms the basis of a statistical process control. The data obtained were lower and upper limits for the preparation of the charter white control. In this way the process of characterization of white was considered to operate under statistical control and concludes that it can be used as part of a plan of insurance of the quality

Guidelines for Implementation of an Advanced Outage Control Center to Improve Outage Coordination, Problem Resolution, and Outage Risk Management

Energy Technology Data Exchange (ETDEWEB)

St. Germain, Shawn W. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Farris, Ronald K. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Whaley, April M. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Medema, Heather D. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Gertman, David I. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

2014-09-01

This research effort is a part of the Light-Water Reactor Sustainability (LWRS) Program, which is a research and development (R&D) program sponsored by Department of Energy (DOE) and performed in close collaboration with industry R&D programs that provide the technical foundations for licensing and managing the long-term, safe, and economical operation of current nuclear power plants. The LWRS program serves to help the U.S. nuclear industry adopt new technologies and engineering solutions that facilitate the continued safe operation of the plants and extension of the current operating licenses. The purpose of this research is to improve management of nuclear power plant (NPP) outages through the development of an advanced outage control center (AOCC) that is specifically designed to maximize the usefulness of communication and collaboration technologies for outage coordination and problem resolution activities. This technical report for industry implementation outlines methods and considerations for the establishment of an AOCC. This report provides a process for implementation of a change management plan, evaluation of current outage processes, the selection of technology, and guidance for the implementation of the selected technology. Methods are presented for both adoption of technologies within an existing OCC and for a complete OCC replacement, including human factors considerations for OCC design and setup.

Job Demand and Control Interventions: A Stakeholder-Centered Best-Evidence Synthesis of Systematic Reviews on Workplace Disability

Directory of Open Access Journals (Sweden)

K Williams-Whitt

2015-04-01

Full Text Available Background: Physical and psychological job demands in combination with the degree of control a worker has over task completion, play an important role in reducing stress. Occupational stress is an important, modifiable factor affecting work disability. However, the effectiveness of reducing job demands or increasing job control remains unclear, particularly for outcomes of interest to employers, such as absenteeism or productivity. Objective: This systematic review reports on job demand and control interventions that impact absenteeism, productivity and financial outcomes. Methods: A stakeholder-centered best-evidence synthesis was conducted with researcher and stakeholder collaboration throughout. Databases and grey literature were searched for systematic reviews between 2000 and 2012: Medline, EMBASE, the Cochrane Database of Systematic Reviews, DARE, CINAHL, PsycINFO, TRIP, health-evidence.ca, Rehab+, National Rehabilitation Information Center (NARIC, and Institute for Work and Health. Articles were assessed independently by two researchers for inclusion criteria and methodological quality. Differences were resolved through consensus. Results: The search resulted in 3363 unique titles. After review of abstracts, 115 articles were retained for full-text review. 11 articles finally met the inclusion criteria and are summarized in this synthesis. The best level of evidence we found indicates that multimodal job demand reductions for either at-work or off-work workers will reduce disability-related absenteeism. Conclusion: In general, the impacts of interventions that aim to reduce job demands or increase job control can be positive for the organization in terms of reducing absenteeism, increasing productivity and cost-effectiveness. However, more high quality research is needed to further assess the relationships and quantify effect sizes for the interventions and outcomes reviewed in this study.

Job demand and control interventions: a stakeholder-centered best-evidence synthesis of systematic reviews on workplace disability.

Science.gov (United States)

Williams-Whitt, K; White, M I; Wagner, S L; Schultz, I Z; Koehn, C; Dionne, C E; Koehoorn, M; Harder, H; Pasca, R; Warje, O; Hsu, V; McGuire, L; Schulz, W; Kube, D; Hook, A; Wright, M D

2015-04-01

Physical and psychological job demands in combination with the degree of control a worker has over task completion, play an important role in reducing stress. Occupational stress is an important, modifiable factor affecting work disability. However, the effectiveness of reducing job demands or increasing job control remains unclear, particularly for outcomes of interest to employers, such as absenteeism or productivity. This systematic review reports on job demand and control interventions that impact absenteeism, productivity and financial outcomes. A stakeholder-centered best-evidence synthesis was conducted with researcher and stakeholder collaboration throughout. Databases and grey literature were searched for systematic reviews between 2000 and 2012: Medline, EMBASE, the Cochrane Database of Systematic Reviews, DARE, CINAHL, PsycINFO, TRIP, health-evidence.ca, Rehab+, National Rehabilitation Information Center (NARIC), and Institute for Work and Health. Articles were assessed independently by two researchers for inclusion criteria and methodological quality. Differences were resolved through consensus. The search resulted in 3363 unique titles. After review of abstracts, 115 articles were retained for full-text review. 11 articles finally met the inclusion criteria and are summarized in this synthesis. The best level of evidence we found indicates that multimodal job demand reductions for either at-work or off-work workers will reduce disability-related absenteeism. In general, the impacts of interventions that aim to reduce job demands or increase job control can be positive for the organization in terms of reducing absenteeism, increasing productivity and cost-effectiveness. However, more high quality research is needed to further assess the relationships and quantify effect sizes for the interventions and outcomes reviewed in this study.

Multi-Center Traffic Management Advisor Operational Field Test Results

Science.gov (United States)

Farley, Todd; Landry, Steven J.; Hoang, Ty; Nickelson, Monicarol; Levin, Kerry M.; Rowe, Dennis W.

2005-01-01

The Multi-Center Traffic Management Advisor (McTMA) is a research prototype system which seeks to bring time-based metering into the mainstream of air traffic control (ATC) operations. Time-based metering is an efficient alternative to traditional air traffic management techniques such as distance-based spacing (miles-in-trail spacing) and managed arrival reservoirs (airborne holding). While time-based metering has demonstrated significant benefit in terms of arrival throughput and arrival delay, its use to date has been limited to arrival operations at just nine airports nationally. Wide-scale adoption of time-based metering has been hampered, in part, by the limited scalability of metering automation. In order to realize the full spectrum of efficiency benefits possible with time-based metering, a much more modular, scalable time-based metering capability is required. With its distributed metering architecture, multi-center TMA offers such a capability.

31 CFR Appendix K to Subpart C of... - Federal Law Enforcement Training Center

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Federal Law Enforcement Training Center K Appendix K to Subpart C of Part 1 Money and Finance: Treasury Office of the Secretary of the Treasury DISCLOSURE OF RECORDS Privacy Act Pt. 1, Subpt. C, App. K Appendix K to Subpart C of Part 1—Federal Law Enforcement Training Center 1. In...

Methodological guide for the acceptance of waste with a natural radioactivity in the classified elimination facilities. Part 1: methodological guide

International Nuclear Information System (INIS)

Cazala, Ch.; Cessac, B.; Gay, D.

2006-01-01

This document is part of the thought implemented by the Direction of pollution prevention and risk (D.P.P.R.) from the Department of Ecology and Sustainable Development as part of a working group on means for detecting radioactivity at the entrance of waste storage centers (said gantries group). The D.P.P.R. has entrusted the implementation to the I.R.S.N.. The completion of the guide was conducted under the supervision of a steering committee composed of representatives of industrial producers of this control type, operators of storage centers, associations for environmental protection, experts and administration. The content and structure of the guide and the accompanying sheets result of discussions within the Steering Committee between D.P.P.R. and I.R.S.N.. (N.C.)

77 FR 34046 - Advisory Committee to the Director (ACD), Centers for Disease Control and Prevention (CDC)-Ethics...

Science.gov (United States)

2012-06-08

... Committee to the Director (ACD), Centers for Disease Control and Prevention (CDC)--Ethics Subcommittee (ES... ACD, CDC, regarding a broad range of public health ethics questions and issues arising from programs... ethics standards to the accreditation process for public health departments; ethical considerations...

41 CFR 61-250.99 - What is the OMB control number for this part?

Science.gov (United States)

2010-07-01

... 41 Public Contracts and Property Management 1 2010-07-01 2010-07-01 true What is the OMB control... TRAINING SERVICE, DEPARTMENT OF LABOR 250-ANNUAL REPORT FROM FEDERAL CONTRACTORS § 61-250.99 What is the OMB control number for this part? Pursuant to the Paperwork Reduction Act, 44 U.S.C. 3501 et seq., and...

41 CFR 61-300.99 - What is the OMB control number for this part?

Science.gov (United States)

2010-07-01

... 41 Public Contracts and Property Management 1 2010-07-01 2010-07-01 true What is the OMB control... TRAINING SERVICE, DEPARTMENT OF LABOR 300-ANNUAL REPORT FROM FEDERAL CONTRACTORS § 61-300.99 What is the OMB control number for this part? Pursuant to the Paperwork Reduction Act, 44 U.S.C. 3501 et seq., and...

Design of SCADA water resource management control center by a bi-objective redundancy allocation problem and particle swarm optimization

International Nuclear Information System (INIS)

Dolatshahi-Zand, Ali; Khalili-Damghani, Kaveh

2015-01-01

SCADA is an essential system to control critical facilities in big cities. SCADA is utilized in several sectors such as water resource management, power plants, electricity distribution centers, traffic control centers, and gas deputy. The failure of SCADA results in crisis. Hence, the design of SCADA system in order to serve a high reliability considering limited budget and other constraints is essential. In this paper, a bi-objective redundancy allocation problem (RAP) is proposed to design Tehran's SCADA water resource management control center. Reliability maximization and cost minimization are concurrently considered. Since the proposed RAP is a non-linear multi-objective mathematical programming so the exact methods cannot efficiently handle it. A multi-objective particle swarm optimization (MOPSO) algorithm is designed to solve it. Several features such as dynamic parameter tuning, efficient constraint handling and Pareto gridding are inserted in proposed MOPSO. The results of proposed MOPSO are compared with an efficient ε-constraint method. Several non-dominated designs of SCADA system are generated using both methods. Comparison metrics based on accuracy and diversity of Pareto front are calculated for both methods. The proposed MOPSO algorithm reports better performance. Finally, in order to choose the practical design, the TOPSIS algorithm is used to prune the Pareto front. - Highlights: • Multi-objective redundancy allocation problem (MORAP) is proposed to design SCADA system. • Multi-objective particle swarm optimization (MOPSO) is proposed to solve MORAP. • Efficient epsilon-constraint method is adapted to solve MORAP. • Non-dominated solutions are generated on Pareto front of MORAP by both methods. • Several multi-objective metrics are calculated to compare the performance of methods

ORNL's Controlled Fusion Atomic Data Center

International Nuclear Information System (INIS)

Barnett, C.F.; Gregory, D.C.

1983-01-01

The Data Center maintains a detailed bibliography of atomic data measurements and calculations for processes of interest to the fusion community. One hundred nineteen journals are regularly searched for papers of interest, including back issues to 1950. Entries are categorized by author, process, reactants, energy range, and theory/experiment. Complete bibliographies have been published since 1978 and a computerized data retrieval system is available. In addition, an updated and extended multi-volume critical compilation of cross sections (the ORNL Redbooks) is under way

Italy INAF Analysis Center Report

Science.gov (United States)

Negusini, M.; Sarti, P.

2013-01-01

This report summarizes the activity of the Italian INAF VLBI Analysis Center. Our Analysis Center is located in Bologna, Italy and belongs to the Institute of Radioastronomy, which is part of the National Institute of Astrophysics. IRA runs the observatories of Medicina and Noto, where two 32-m VLBI AZ-EL telescopes are situated. This report contains the AC's VLBI data analysis activities and shortly outlines the investigations into the co-locations of space geodetic instruments.

76 FR 29755 - Advisory Committee to the Director (ACD), Centers for Disease Control and Prevention (CDC)-Ethics...

Science.gov (United States)

2011-05-23

... Committee to the Director (ACD), Centers for Disease Control and Prevention (CDC)--Ethics Subcommittee (ES... of public health ethics questions and issues arising from programs, scientists and practitioners... April 28, 2011, ACD, CDC meeting; discussion of next steps on addressing potential public health ethical...

The World Optical Depth Research and Calibration Center (WORCC) quality assurance and quality control of GAW-PFR AOD measurements

Science.gov (United States)

Kazadzis, Stelios; Kouremeti, Natalia; Nyeki, Stephan; Gröbner, Julian; Wehrli, Christoph

2018-02-01

The World Optical Depth Research Calibration Center (WORCC) is a section within the World Radiation Center at Physikalisches-Meteorologisches Observatorium (PMOD/WRC), Davos, Switzerland, established after the recommendations of the World Meteorological Organization for calibration of aerosol optical depth (AOD)-related Sun photometers. WORCC is mandated to develop new methods for instrument calibration, to initiate homogenization activities among different AOD networks and to run a network (GAW-PFR) of Sun photometers. In this work we describe the calibration hierarchy and methods used under WORCC and the basic procedures, tests and processing techniques in order to ensure the quality assurance and quality control of the AOD-retrieved data.

Alarm management in TRANSPETRO National Oil Control Center

Energy Technology Data Exchange (ETDEWEB)

Amado, Helio; Costa, Luciano [TRANSPETRO - PETROBRAS Transporte S.A., Rio de Janeiro, RJ (Brazil)

2009-07-01

For sure Alarm Management is not a new issue. EEMUA 191 has been around since 1999 and everyone has received visits from consultants in this area. Besides this regulators have requested that operators have a policy for it. However there are few papers showing actual pipeline operator experience in alarm management. In this paper we present the work developed in TRANSPETRO National Oil Control Center since 2006, where we operate 5509 km of crude oil and refined products pipelines. Since the beginning of the centralized operation in 2002, alarm management has been a concern but a systematic approach has been taken since 2006. Initially we will make a brief revision of the literature and show trends for regulations. Then we will show the tools and the approach we have taken. Finally, the further developments we see. The point that we want to discuss is that, it has been very difficult to implement the system in a linear way and we believe that companies that have huge legacy systems, the same probably will occur. Putting in simple words, our main conclusion is: Implementing an Alarm Management policy produces good results however probably sometimes is better not to follow strictly the traditional steps. (author)

Climate Resilient Analysis of the Groningen City Center

OpenAIRE

MORALES LLAMAS, MÓNICA

2017-01-01

This final thesis project is part of the research that is carrying out by the Gemeente Groningen in order to make the city center more sustainable and livable. The municipality of Groningen has recently published a conceptual development plan for improving the inner-city of Groningen, this report is called Bestemming Binnenstad 01/2016 . The main focus of this report is convert the city center to an environmental friendly downtown, reducing pollution, reroute public and private transpo...

Haptic control of a pneumatic muscle actuator to provide resistance for simulated isokinetic exercise; part II: control development and testing.

Science.gov (United States)

Hall, Kara L; Phillips, Chandler A; Reynolds, David B; Mohler, Stanley R; Rogers, Dana B; Neidhard-Doll, Amy T

2015-01-01

Pneumatic muscle actuators (PMAs) have a high power to weight ratio and possess unique characteristics which make them ideal actuators for applications involving human interaction. PMAs are difficult to control due to nonlinear dynamics, presenting challenges in system implementation. Despite these challenges, PMAs have great potential as a source of resistance for strength training and rehabilitation. The objective of this work was to control a PMA for use in isokinetic exercise, potentially benefiting anyone in need of optimal strength training through a joint's range of motion. The controller, based on an inverse three-element phenomenological model and adaptive nonlinear control, allows the system to operate as a type of haptic device. A human quadriceps dynamic simulator was developed (as described in Part I of this work) so that control effectiveness and accommodation could be tested prior to human implementation. Tracking error results indicate that the control system is effective at producing PMA displacement and resistance necessary for a scaled, simulated neuromuscular actuator to maintain low-velocity isokinetic movement during simulated concentric and eccentric knee extension.

Launch Vehicle Manual Steering with Adaptive Augmenting Control In-flight Evaluations of Adverse Interactions Using a Piloted Aircraft

Science.gov (United States)

Hanson, Curt; Miller, Chris; Wall, John H.; Vanzwieten, Tannen S.; Gilligan, Eric; Orr, Jeb S.

2015-01-01

An adaptive augmenting control algorithm for the Space Launch System has been developed at the Marshall Space Flight Center as part of the launch vehicles baseline flight control system. A prototype version of the SLS flight control software was hosted on a piloted aircraft at the Armstrong Flight Research Center to demonstrate the adaptive controller on a full-scale realistic application in a relevant flight environment. Concerns regarding adverse interactions between the adaptive controller and a proposed manual steering mode were investigated by giving the pilot trajectory deviation cues and pitch rate command authority. Two NASA research pilots flew a total of twenty five constant pitch-rate trajectories using a prototype manual steering mode with and without adaptive control.

Effortful Control and Parents' Emotion Socialization Patterns Predict Children's Positive Social Behavior: A Person-Centered Approach

Science.gov (United States)

Miller, Rachel L.; Dunsmore, Julie C.; Smith, Cynthia L.

2015-01-01

Research Findings: We examined relations of effortful control with parent emotion socialization practices and child social behavior using a person-centered approach in children ages 18 months to 5 years. A total of 76 parents (66 mothers, 10 fathers) completed questionnaires at screening and 6-month follow-up. There were no age differences in…

Person-centered care planning and service engagement: a study protocol for a randomized controlled trial.

Science.gov (United States)

Stanhope, Victoria; Tondora, Janis; Davidson, Larry; Choy-Brown, Mimi; Marcus, Steven C

2015-04-22

Service disengagement is a pervasive challenge the mental health care system faces. Mental health services are of little value should persons with mental illnesses continue to opt out of receiving them. Consumers attribute disengagement from care to an absence of choice in their treatment. In response, the mental health system is adopting a person-centered model, based upon recovery principles, to engage consumers more actively in their care. Person-centered care planning is a promising practice involving collaboration to develop and implement an actionable plan to assist the person in achieving personal recovery goals. This study design combines a parallel-group randomized controlled trial of community mental health organizations with qualitative methods to assess the effectiveness of person-centered care planning. Participants at 14 sites in Delaware and Connecticut will be randomized to treatment as usual or the person-centered care planning intervention. Participants will be in leadership (n = 70) or supervisory or direct care (n = 210) roles. The person-centered care planning intervention involves intensive staff training and 12 months of ongoing technical assistance. Quantitative survey data will be collected at baseline, 6 months and 12 months measuring person-centered care planning competency and organizational factors. Consumer outcomes (engagement, medication adherence, functioning and consumer satisfaction) will be assessed by Medicaid and state-level data. Qualitative data focused on process factors will include staff and consumer interviews and focus groups. In this intent-to-treat analysis, we will use mixed-effects multivariate regression models to evaluate the differential impact of the person-centered care planning intervention on each consumer and implementation outcome as well as the extent to which clinician assessments of organizational factors are associated with the implementation outcome. Mixed methods will triangulate and strengthen the

Poison control centers in developing countries and Asia's need for toxicology education

International Nuclear Information System (INIS)

Makalinao, Irma R.; Awang, Rahmat

2005-01-01

Poison control centers (PCCs) in developing countries have been set up in response to the challenge of decreasing mortality and morbidity from poisoning. The services range from poison information to actual clinical treatment mostly of acute cases. Lately, PCCs have expanded from their traditional role to one that actively engages in community health studies, toxicovigilance along with treatment of chronic poisoning. Recognizing that types of poisoning and specific needs may vary from country to country, toxicology education that addresses these unique regional issues has become more necessary. Toxicology education, both formal and informal, exists in various stages of development in Asia. Clearly, there are gaps that need to be addressed especially in areas where there are no poison centers or where strengthening is necessary. Collaboration between PCCs in developing countries can help augment available resources including human, analytical and technical expertise. The critical mass of trained toxicologists will fill in the demand for clinical and regulatory specialists and educators as well. This paper highlights the experiences and resources available to the Philippine and Malaysian poison centers and the strengths generated by networking and collaboration. The role of Asia Pacific Association of Medical Toxicology (APAMT) as the Science NGO representative to the Intergovernmental Forum on Chemical Safety (IFCS) forum standing committee in promoting chemical safety at the regional level will be discussed. The 'Clearinghouse on the Sound Management of Chemicals', a platform for engaging multi-stakeholder and interdisciplinary partnerships, will be described as a possible model for capacity building to advance chemical safety through education and training not only in developing countries in Asia but globally as well

Human reliability and the control of continuous processes: case study of TRANSPETRO gas control center room; A confiabilidade humana no controle de processos continuos: estudo de caso no centro de controle de gasodutos da TRANSPETRO