WorldWideScience

Sample records for part-7 digital item

  1. Digital bedrock geologic map of the Vermont part of the 7.5 x 15 minute Mount Ascutney and Springfield quadrangles, Vermont

    Data.gov (United States)

    Vermont Center for Geographic Information — Digital Data from VG96-733A Walsh, GJ, Armstrong, TR�and Ratcliffe, NM, 1996,�Digital bedrock geologic map of the Vermont part of the 7.5 x 15 minute Mount Ascutney...

  2. Design patterns for digital item types in higher education

    NARCIS (Netherlands)

    Draaijer, S.; Hartog, R.J.M.

    2007-01-01

    A set of design patterns for digital item types has been developed in response to challenges identified in various projects by teachers in higher education. The goal of the projects in question was to design and develop formative and summative tests, and to develop interactive learning material in

  3. Organization of project works in Industry 4.0 digital item designing companies

    Science.gov (United States)

    Gurjanov, A. V.; Zakoldaev, D. A.; Shukalov, A. V.; Zharinov, I. O.

    2018-05-01

    The task of the project works organization in the Industry 4.0 item designing digital factories is being studied. There is a scheme of the item designing component life cycle. There is also a scheme how to develop and confirm the quality of the item designing component documentation using the mathematical modelling. There is a description of the self-organization principles for the cyber and physical technological equipment in the Industry 4.0 «smart factory» company during the manufacturing process.

  4. 17 CFR 260.7a-16 - Inclusion of items, differentiation between items and answers, omission of instructions.

    Science.gov (United States)

    2010-04-01

    ... 17 Commodity and Securities Exchanges 3 2010-04-01 2010-04-01 false Inclusion of items, differentiation between items and answers, omission of instructions. 260.7a-16 Section 260.7a-16 Commodity and... INDENTURE ACT OF 1939 Formal Requirements § 260.7a-16 Inclusion of items, differentiation between items and...

  5. Advanced software tools for digital loose part monitoring systems

    International Nuclear Information System (INIS)

    Ding, Y.

    1996-01-01

    The paper describes two software modules as analysis tools for digital loose part monitoring systems. The first module is called acoustic module which utilizes the multi-media features of modern personal computers to replay the digital stored short-time bursts with sufficient length and in good quality. This is possible due to the so-called puzzle technique developed at ISTec. The second module is called classification module which calculates advanced burst parameters and classifies the acoustic events in pre-defined classes with the help of an artificial multi-layer perception neural network trained with the back propagation algorithm. (author). 7 refs, 7 figs

  6. Advanced software tools for digital loose part monitoring systems

    Energy Technology Data Exchange (ETDEWEB)

    Ding, Y [Institute for Safety Technology (ISTec) GmbH, Garching (Germany)

    1997-12-31

    The paper describes two software modules as analysis tools for digital loose part monitoring systems. The first module is called acoustic module which utilizes the multi-media features of modern personal computers to replay the digital stored short-time bursts with sufficient length and in good quality. This is possible due to the so-called puzzle technique developed at ISTec. The second module is called classification module which calculates advanced burst parameters and classifies the acoustic events in pre-defined classes with the help of an artificial multi-layer perception neural network trained with the back propagation algorithm. (author). 7 refs, 7 figs.

  7. A study on the establishment of safety assessment guidelines of commercial grade item dedication in digitalized safety systems

    International Nuclear Information System (INIS)

    Hwang, H. S.; Kim, B. R.; Oh, S. H.

    1999-01-01

    Because of obsolescing the components used in safety related systems of nuclear power plants, decreasing the number of suppliers qualified for the nuclear QA program and increasing maintenance costs of them, utilities have been considering to use commercial grade digital computers as an alternative for resolving such issues. However, commercial digital computers use the embedded pre-existing software, including operating system software, which are not developed by using nuclear grade QA program. Thus, it is necessary for utilities to establish processes for dedicating digital commercial grade items. A regulatory body also needs guidance to evaluate the digital commercial products properly. This paper surveyed the regulations and their regulatory guides, which establish the requirements for commercial grade items dedication, industry standards and guidances applicable to safety related systems. This paper provides some guidelines to be applied in evaluating the safety of digital upgrades and new digital plant protection systems in Korea

  8. 78 FR 29392 - Embedded Digital Devices in Safety-Related Systems, Systems Important to Safety, and Items Relied...

    Science.gov (United States)

    2013-05-20

    ... NUCLEAR REGULATORY COMMISSION [NRC-2013-0098] Embedded Digital Devices in Safety-Related Systems, Systems Important to Safety, and Items Relied on for Safety AGENCY: Nuclear Regulatory Commission. ACTION... (NRC) is issuing for public comment Draft Regulatory Issue Summary (RIS) 2013-XX, ``Embedded Digital...

  9. Cyber and physical equipment digital control system in Industry 4.0 item designing company

    Science.gov (United States)

    Gurjanov, A. V.; Zakoldaev, D. A.; Shukalov, A. V.; Zharinov, I. O.

    2018-05-01

    The problem of organization of digital control of the item designing company equipped with cyber and physical systems is being studied. A scheme of cyber and physical systems and personnel interaction in the Industry 4.0 smart factory company is presented. A scheme of assembly units transportation in the Industry 4.0 smart factory company is provided. A scheme of digital control system in the Industry 4.0 smart factory company is given.

  10. Digital dental photography. Part 1: an overview.

    Science.gov (United States)

    Ahmad, I

    2009-04-25

    This paper is the first article in a new ten-part series on digital dental photography. Part 1 previews and outlines the contents of the subsequent papers and in addition, defines the aims and objectives of a digital dental image and the features that are required for an ideal intra-oral picture.

  11. Fine Coining of Bulk Metal Formed Parts in Digital Environment

    International Nuclear Information System (INIS)

    Pepelnjak, T.; Kuzman, K.; Krusic, V.

    2007-01-01

    At present the production of bulk metal formed parts in the automotive industry must increasingly fulfil demands for narrow tolerance fields. The final goal of the million parts production series is oriented towards zero defect production. This is possible by achieving production tolerances which are even tighter than the prescribed ones. Different approaches are used to meet this demanding objective affected by many process parameters. Fine coining as a final forming operation is one of the processes which enables the production of good manufacturing tolerances and high process stability. The paper presents the analyses of the production of the inner race and a digital evaluation of manufacturing tolerances caused by different material parameters of the workpiece. Digital optimisation of the fine coining with FEM simulations was performed in two phases. Firstly, fine coining of the inner racer in a digital environment was comparatively analysed with the experimental work in order to verify the accuracy and reliability of digitally calculated data. Secondly, based on the geometrical data of a digitally fine coined part, tool redesign was proposed in order to tighten production tolerances and increase the process stability of the near-net-shaped cold formed part

  12. Usage of Commercial Grade Programmable Digital Systems in Safety Related Applications

    International Nuclear Information System (INIS)

    Mandic, D.

    2006-01-01

    This paper explains methods and conditions, which if completely and correctly fulfilled, enable an operating NPP (Nuclear Power Plant) licensed and operating in accordance with the US codes and US regulatory requirements to use a commercial grade programmable digital device (PLC - Programmable Digital Controller, digital controller, digital computer or process computer) in a safety related application in a NPP. In mid 80's, when an intensive construction cycle of the new NPPs in the U.S.A. was completed, many equipment manufacturers either disappeared from the market or they abandoned their product lines that were designed and manufactured under 10 CFR Part 50 Appendix B quality assurance program. The quality assurance as defined by 10 CFR Part 50 Appendix B comprises all those planned and systematic actions necessary to provide adequate confidence that a Structure, System or Component (SSC) will perform satisfactorily in service . The operating NPPs faced the problem related to the availability of qualified equipment, components and spare parts. The US NRC (Nuclear Regulatory Commission) recognized that problem timely (Oct. 1978 revision of 10CFR21) and required a commercial grade item to be dedicated before it could be used as a basic component. A special process named Dedication of CGI - Commercial Grade Items if conducted properly, provides reasonable assurance that a commercial grade item to be used as a basic component will perform its intended safety related function and, in this respect, is deemed equivalent to an item designed and manufactured under 10 CFR Part 50 Appendix B. After that, the Dedication of CGI has been widely used mostly for relatively simple mechanical, electrical, and IandC components and spare parts. In order to provide guidance to the dedication process, EPRI has issued two documents (EPRI NP-5652 and Supplemental Guidance for EPRI NP-5652). All nuclear power plants, which comply with the US nuclear regulatory requirements, hindered as

  13. Digital radiography detectors - A technical overview: Part 1

    International Nuclear Information System (INIS)

    Lanca, Luis; Silva, Augusto

    2009-01-01

    During the last two decades screen-film (SF) systems have been replaced by digital X-ray systems. The advent of digital technologies brought a number of digital solutions based on different detector and readout technologies. Improvements in technology allowed the development of new digital technologies for projection radiography such as computed radiography (CR) and digital radiography (DR). The large number of scientific papers concerning digital X-ray systems that have been published over the last 25 years indicates the relevance of these technologies in healthcare. There are important differences among different detector technologies that may affect system performance and image quality for diagnostic purposes. Radiographers are expected to have an effective understanding of digital X-ray technologies and a high level of knowledge and awareness concerning the capabilities of these systems. Patient safety and reliable diagnostic information are intrinsically linked to these factors. In this review article - which is the first of two parts - a global overview of the digital radiography systems (both CR and DR) currently available for clinical practice is provided

  14. A Balance of Primary and Secondary Values: Exploring a Digital Legacy

    Directory of Open Access Journals (Sweden)

    Amber L. Cushing

    2014-06-01

    Full Text Available This exploratory research explores the concept of a digital legacy as a general concept and as a collection of digital possessions with unique characteristics. The results reported in this article are part of a larger study. In Cushing (2013, the author identified the characteristics of a digital possession. In this study, these characteristics of a digital possession were utilized to explore how the characteristics of several digital possessions could form a collection, or a digital legacy. In addition to being explored as a collection of digital possessions, data was collected about the general concept of a digital legacy. In part I of the study, 23 participants from three age groups were interviewed about their general concept of a digital legacy. Five general characteristics describing a digital legacy were identified. In part II of the study, interview data from Cushing (2013 was used to create statements describing digital possessions. The statements were classified utilizing the archival concept of primary and secondary values, as well as the consumer behavior concepts of self extension to possessions and possession attachment. Primary value refers to the purpose for which the item was created, while secondary value refers to an additional value that the participants can perceive the item to hold, such as a perception that an item can represent one's identity. Using standard Q method procedure, 48 participants were directed to rank their agreement with 60 statements (written on cards, along a distribution of -5 to +5, according to the characteristics of the digital possession they would most like to maintain for a digital legacy. The ranked statements were analyzed using Q factor analysis, in order to perceive the most common statements associated with maintaining digital possessions for a digital legacy. Q method results suggested that most individuals described the digital possessions they wanted to maintain for a digital legacy using

  15. 2 CFR Appendix B to Part 230 - Selected Items of Cost

    Science.gov (United States)

    2010-01-01

    ... PRINCIPLES FOR NON-PROFIT ORGANIZATIONS (OMB CIRCULAR A-122) Pt. 230, App. B Appendix B to Part 230—Selected... use of patents and copyrights 45. Selling and marketing 46. Specialized service facilities 47. Taxes... of this appendix provide principles to be applied in establishing the allowability of certain items...

  16. Evaluating digital libraries in the health sector. Part 2: measuring impacts and outcomes.

    Science.gov (United States)

    Cullen, Rowena

    2004-03-01

    This is the second part of a two-part paper which explores methods that can be used to evaluate digital libraries in the health sector. Part 1 focuses on approaches to evaluation that have been proposed for mainstream digital information services. This paper investigates evaluative models developed for some innovative digital library projects, and some major national and international electronic health information projects. The value of ethnographic methods to provide qualitative data to explore outcomes, adding to quantitative approaches based on inputs and outputs is discussed. The paper concludes that new 'post-positivist' models of evaluation are needed to cover all the dimensions of the digital library in the health sector, and some ways of doing this are outlined.

  17. 7 CFR 1728.30 - Inclusion of an item for listing or technical acceptance.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 11 2010-01-01 2010-01-01 false Inclusion of an item for listing or technical acceptance. 1728.30 Section 1728.30 Agriculture Regulations of the Department of Agriculture (Continued... AND CONSTRUCTION § 1728.30 Inclusion of an item for listing or technical acceptance. (a) Scope. RUS...

  18. A Survey of z>5.7 Quasars in the Sloan Digital Sky Survey IV

    DEFF Research Database (Denmark)

    Fan, Xiaohui; Strauss, Michael A.; Richards, Gordon T.

    2005-01-01

    We present the discovery of seven quasars at z>5.7, selected from ~2000 deg^2 of multicolor imaging data of the Sloan Digital Sky Survey (SDSS). The new quasars have redshifts z from 5.79 to 6.13. Five are selected as part of a complete flux-limited sample in the SDSS Northern Galactic Cap; two...

  19. Automating Registration of Digital Preservation Copies: The Place of Registries in the Digitization Workflow

    Directory of Open Access Journals (Sweden)

    William Carney

    2008-03-01

    Full Text Available I would like to thank LIBER and EBLIDA for inviting me to present this paper on the role of registries in the digitization workflow. During the past 18 months, OCLC has been working on a project to synchronize WorldCat with mass digitization projects, which we will begin to pilot shortly. The concept is to educate WorldCat about the millions of new digital manifestations for print items being produced. During the past 35 years, librarians have built a comprehensive representation of print materials and holdings in WorldCat item-by-item. However, as we move into a more digital world through the production of born-digital materials and the high-volume reformatting of our print heritage, it is impractical to catalog these new manifestations via traditional workflows. The OCLC eContent Synchronization program is one example of how OCLC is moving to address the need to ingest metadata representing digital works on an industrial scale. Through strategic alliances with key digital content producers and automated processing, new digital surrogate records will be created to increase the visibility of and access to content at the point of need. While the eContent Synchronization program is an important initiative for visibility and access, of equal importance is the process of registering the existence of the preservation copies of these digital items.

  20. 16 CFR Appendix D to Part 436 - Sample Item 20(3) Table-Status of Franchise Outlets

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Sample Item 20(3) Table-Status of Franchise Outlets D Appendix D to Part 436 Commercial Practices FEDERAL TRADE COMMISSION TRADE REGULATION RULES... Item 20(3) Table—Status of Franchise Outlets Status of Franchise Outlets For years 2004 to 2006 Column...

  1. Evaluating digital libraries in the health sector. Part 1: measuring inputs and outputs.

    Science.gov (United States)

    Cullen, Rowena

    2003-12-01

    This is the first part of a two-part paper which explores methods that can be used to evaluate digital libraries in the health sector. In this first part, some approaches to evaluation that have been proposed for mainstream digital information services are examined for their suitability to provide models for the health sector. The paper summarizes some major national and collaborative initiatives to develop measures for digital libraries, and analyses these approaches in terms of their relationship to traditional measures of library performance, which are focused on inputs and outputs, and their relevance to current debates among health information specialists. The second part* looks more specifically at evaluative models based on outcomes, and models being developed in the health sector.

  2. Digital compilation bedrock geologic map of part of the Waitsfield quadrangle, Vermont

    Data.gov (United States)

    Vermont Center for Geographic Information — Digital Data from VG96-03�Digital compilation bedrock geologic map of part of the Waitsfield quadrangle, Vermont: VGS Open-File Report VG96-3A, 2 plates, scale...

  3. 16 CFR Appendix A to Part 436 - Sample Item 10 Table-Summary of Financing Offered

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Sample Item 10 Table-Summary of Financing Offered A Appendix A to Part 436 Commercial Practices FEDERAL TRADE COMMISSION TRADE REGULATION RULES DISCLOSURE REQUIREMENTS AND PROHIBITIONS CONCERNING FRANCHISING Pt. 436, App. A Appendix A to Part 436—Sample...

  4. The Profiles in Science Digital Library: Behind the Scenes.

    Science.gov (United States)

    Gallagher, Marie E; Moffatt, Christie

    2012-01-01

    This demonstration shows the Profiles in Science ® digital library. Profiles in Science contains digitized selections from the personal manuscript collections of prominent biomedical researchers, medical practitioners, and those fostering science and health. The Profiles in Science Web site is the delivery mechanism for content derived from the digital library system. The system is designed according to our basic principles for digital library development [1]. The digital library includes the rules and software used for digitizing items, creating and editing database records and performing quality control as well as serving the digital content to the public. Among the types of data managed by the digital library are detailed item-level, collection-level and cross-collection metadata, digitized photographs, papers, audio clips, movies, born-digital electronic files, optical character recognized (OCR) text, and annotations (see Figure 1). The digital library also tracks the status of each item, including digitization quality, sensitivity of content, and copyright. Only items satisfying all required criteria are released to the public through the World Wide Web. External factors have influenced all aspects of the digital library's infrastructure.

  5. Should You? May You? Can You? Factors in Selecting Rare Books and Special Collections for Digitization

    Science.gov (United States)

    Gertz, Janet

    2013-01-01

    Selection for digitization is about more than which items to scan. Selection is what shapes the online collections that are built by libraries, archives, historical societies, and other cultural heritage institutions. By selecting well, institutions can concentrate on the parts of their collections that are best suited to digitization, that make…

  6. 15 CFR 764.7 - Activities involving items that may have been illegally exported or reexported to Libya.

    Science.gov (United States)

    2010-01-01

    ..., transfer, finance, forward, or otherwise service, in whole or in part, any item subject to the EAR with... item being exported or reexported to Libya may require a license based on the classification of the...

  7. Psychometric analysis of the Generalized Anxiety Disorder scale (GAD-7) in primary care using modern item response theory.

    Science.gov (United States)

    Jordan, Pascal; Shedden-Mora, Meike C; Löwe, Bernd

    2017-01-01

    The Generalized Anxiety Disorder scale (GAD-7) is one of the most frequently used diagnostic self-report scales for screening, diagnosis and severity assessment of anxiety disorder. Its psychometric properties from the view of the Item Response Theory paradigm have rarely been investigated. We aimed to close this gap by analyzing the GAD-7 within a large sample of primary care patients with respect to its psychometric properties and its implications for scoring using Item Response Theory. Robust, nonparametric statistics were used to check unidimensionality of the GAD-7. A graded response model was fitted using a Bayesian approach. The model fit was evaluated using posterior predictive p-values, item information functions were derived and optimal predictions of anxiety were calculated. The sample included N = 3404 primary care patients (60% female; mean age, 52,2; standard deviation 19.2) The analysis indicated no deviations of the GAD-7 scale from unidimensionality and a decent fit of a graded response model. The commonly suggested ultra-brief measure consisting of the first two items, the GAD-2, was supported by item information analysis. The first four items discriminated better than the last three items with respect to latent anxiety. The information provided by the first four items should be weighted more heavily. Moreover, estimates corresponding to low to moderate levels of anxiety show greater variability. The psychometric validity of the GAD-2 was supported by our analysis.

  8. 16 CFR Appendix F to Part 436 - Sample Item 20(5) Table-Projected New Franchised Outlets

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Sample Item 20(5) Table-Projected New Franchised Outlets F Appendix F to Part 436 Commercial Practices FEDERAL TRADE COMMISSION TRADE REGULATION RULES DISCLOSURE REQUIREMENTS AND PROHIBITIONS CONCERNING FRANCHISING Pt. 436, App. F Appendix F to Part...

  9. 16 CFR Appendix C to Part 436 - Sample Item 20(2) Table-Transfers of Franchised Outlets

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Sample Item 20(2) Table-Transfers of Franchised Outlets C Appendix C to Part 436 Commercial Practices FEDERAL TRADE COMMISSION TRADE REGULATION RULES DISCLOSURE REQUIREMENTS AND PROHIBITIONS CONCERNING FRANCHISING Pt. 436, App. C Appendix C to Part...

  10. Screening instruments for a population of older adults: The 10-item Kessler Psychological Distress Scale (K10) and the 7-item Generalized Anxiety Disorder Scale (GAD-7).

    Science.gov (United States)

    Vasiliadis, Helen-Maria; Chudzinski, Veronica; Gontijo-Guerra, Samantha; Préville, Michel

    2015-07-30

    Screening tools that appropriately detect older adults' mental disorders are of great public health importance. The present study aimed to establish cutoff scores for the 10-item Kessler Psychological Distress (K10) and the 7-item Generalized Anxiety Disorder (GAD-7) scales when screening for depression and anxiety. We used data from participants (n = 1811) in the Enquête sur la Santé des Aînés-Service study. Depression and anxiety were measured using DSM-V and DSM-IV criteria. Receiver operating characteristic (ROC) curve analysis provided an area under the curve (AUC) of 0.767 and 0.833 for minor and for major depression when using K10. A cutoff of 19 was found to balance sensitivity (0.794) and specificity (0.664) for minor depression, whereas a cutoff of 23 was found to balance sensitivity (0.692) and specificity (0.811) for major depression. When screening for an anxiety with GAD-7, ROC analysis yielded an AUC of 0.695; a cutoff of 5 was found to balance sensitivity (0.709) and specificity (0.568). No significant differences were found between subgroups of age and gender. Both K10 and GAD-7 were able to discriminate between cases and non-cases when screening for depression and anxiety in an older adult population of primary care service users. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  11. Using Digital Technology to See Angles from Different Angles. Part 1: Corners

    Science.gov (United States)

    Host, Erin; Baynham, Emily; McMaster, Heather

    2014-01-01

    In Part 1 of their article, Erin Host, Emily Baynham and Heather McMaster use a combination of digital technology and concrete materials to explore the concept of "corners". They provide a practical, easy to follow sequence of activities that builds on students' understandings. [For "Using Digital Technology to See Angles from…

  12. Quality control for digital mammography: Part II recommendations from the ACRIN DMIST trial

    International Nuclear Information System (INIS)

    Yaffe, Martin J.; Bloomquist, Aili K.; Mawdsley, Gordon E.

    2006-01-01

    The Digital Mammography Imaging Screening Trial (DMIST), conducted under the auspices of the American College of Radiology Imaging Network (ACRIN), is a clinical trial designed to compare the accuracy of digital versus screen-film mammography in a screening population [E. Pisano et al., ACRIN 6652--Digital vs. Screen-Film Mammography, ACRIN (2001)]. Part I of this work described the Quality Control program developed to ensure consistency and optimal operation of the digital equipment. For many of the tests, there were no failures during the 24 months imaging was performed in DMIST. When systems failed, they generally did so suddenly rather than through gradual deterioration of performance. In this part, the utility and effectiveness of those tests are considered. This suggests that after verification of proper operation, routine extensive testing would be of minimal value. A recommended set of tests is presented including additional and improved tests, which we believe meet the intent and spirit of the Mammography Quality Standards Act regulations to ensure that full-field digital mammography systems are functioning correctly, and consistently producing mammograms of excellent image quality

  13. User Impact on Selection, Digitization, and the Development of Digital Special Collections

    Science.gov (United States)

    Mills, Alexandra

    2015-01-01

    Libraries and archives digitize their special collections in an effort to increase access to rare and unique items. To ensure that resulting digital collections meet user needs, institutions have made assessment, consultation, and user participation integral to digitization initiatives and the selection process. Institutions must also build…

  14. Measuring anxiety after spinal cord injury: Development and psychometric characteristics of the SCI-QOL Anxiety item bank and linkage with GAD-7.

    Science.gov (United States)

    Kisala, Pamela A; Tulsky, David S; Kalpakjian, Claire Z; Heinemann, Allen W; Pohlig, Ryan T; Carle, Adam; Choi, Seung W

    2015-05-01

    To develop a calibrated item bank and computer adaptive test to assess anxiety symptoms in individuals with spinal cord injury (SCI), transform scores to the Patient Reported Outcomes Measurement Information System (PROMIS) metric, and create a statistical linkage with the Generalized Anxiety Disorder (GAD)-7, a widely used anxiety measure. Grounded-theory based qualitative item development methods; large-scale item calibration field testing; confirmatory factor analysis; graded response model item response theory analyses; statistical linking techniques to transform scores to a PROMIS metric; and linkage with the GAD-7. Setting Five SCI Model System centers and one Department of Veterans Affairs medical center in the United States. Participants Adults with traumatic SCI. Spinal Cord Injury-Quality of Life (SCI-QOL) Anxiety Item Bank Seven hundred sixteen individuals with traumatic SCI completed 38 items assessing anxiety, 17 of which were PROMIS items. After 13 items (including 2 PROMIS items) were removed, factor analyses confirmed unidimensionality. Item response theory analyses were used to estimate slopes and thresholds for the final 25 items (15 from PROMIS). The observed Pearson correlation between the SCI-QOL Anxiety and GAD-7 scores was 0.67. The SCI-QOL Anxiety item bank demonstrates excellent psychometric properties and is available as a computer adaptive test or short form for research and clinical applications. SCI-QOL Anxiety scores have been transformed to the PROMIS metric and we provide a method to link SCI-QOL Anxiety scores with those of the GAD-7.

  15. The Dichotic Digits difference Test (DDdT): Development, Normative Data, and Test-Retest Reliability Studies Part 1.

    Science.gov (United States)

    Cameron, Sharon; Glyde, Helen; Dillon, Harvey; Whitfield, Jessica; Seymour, John

    2016-06-01

    The dichotic digits test is one of the most widely used assessment tools for central auditory processing disorder. However, questions remain concerning the impact of cognitive factors on test results. To develop the Dichotic Digits difference Test (DDdT), an assessment tool that could differentiate children with cognitive deficits from children with genuine dichotic deficits based on differential test results. The DDdT consists of four subtests: dichotic free recall (FR), dichotic directed left ear (DLE), dichotic directed right ear (DRE), and diotic. Scores for six conditions are calculated (FR left ear [LE], FR right ear [RE], and FR total, as well as DLE, DRE, and diotic). Scores for four difference measures are also calculated: dichotic advantage, right-ear advantage (REA) FR, REA directed, and attention advantage. Experiment 1 involved development of the DDdT, including error rate analysis. Experiment 2 involved collection of normative and test-retest reliability data. Twenty adults (aged 25 yr 10 mo to 50 yr 7 mo, mean 36 yr 4 mo) took part in the development study; 62 normal-hearing, typically developing, primary-school children (aged 7 yr 1 mo to 11 yr 11 mo, mean 9 yr 4 mo) and 10 adults (aged 25 yr 0 mo to 51 yr 6 mo, mean 34 yr 10 mo) took part in the normative and test-retest reliability study. In Experiment 1, error rate analysis was conducted on the 36 digit-pair combinations of the DDdT. Normative data collected in Experiment 2 were arcsine transformed to achieve a distribution that was closer to a normal distribution and z-scores calculated. Pearson product-moment correlations were used to determine the strength of relationships between DDdT conditions. The development study revealed no significant differences in the adult population between test and retest on any DDdT condition. Error rates on 36 digit pairs ranged from 1.5% to 16.7%. The most and the least error-prone digits were removed before commencement of the normative data study, leaving 25

  16. Digital bedrock geologic map of parts of the Huntington, Richmond, Bolton and Waterbury quadrangles, Vermont

    Data.gov (United States)

    Vermont Center for Geographic Information — Digital Data from VG95-9A Thompson, PJ�and Thompson, TB, 1995, Digital bedrock geologic map of parts of the Huntington, Richmond, Bolton and Waterbury quadrangles,...

  17. 7 CFR Appendix B to Part 3015 - OMB Circular A-128, “Audits of State and Local Governments”

    Science.gov (United States)

    2010-01-01

    ... claims for advances and reimbursements; —Negative assurance on those items not tested; —A summary of all... 7 Agriculture 15 2010-01-01 2010-01-01 false OMB Circular A-128, âAudits of State and Local... Pt. 3015, App. B Appendix B to Part 3015—OMB Circular A-128, “Audits of State and Local Governments...

  18. Digital dental photography. Part 4: choosing a camera.

    Science.gov (United States)

    Ahmad, I

    2009-06-13

    With so many cameras and systems on the market, making a choice of the right one for your practice needs is a daunting task. As described in Part 1 of this series, a digital single reflex (DSLR) camera is an ideal choice for dental use in enabling the taking of portraits, close-up or macro images of the dentition and study casts. However, for the sake of completion, some other cameras systems that are used in dentistry are also discussed.

  19. Optimization of digitization procedures in cultural heritage preservation

    Science.gov (United States)

    Martínez, Bea; Mitjà, Carles; Escofet, Jaume

    2013-11-01

    The digitization of both volumetric and flat objects is the nowadays-preferred method in order to preserve cultural heritage items. High quality digital files obtained from photographic plates, films and prints, paintings, drawings, gravures, fabrics and sculptures, allows not only for a wider diffusion and on line transmission, but also for the preservation of the original items from future handling. Early digitization procedures used scanners for flat opaque or translucent objects and camera only for volumetric or flat highly texturized materials. The technical obsolescence of the high-end scanners and the improvement achieved by professional cameras has result in a wide use of cameras with digital back to digitize any kind of cultural heritage item. Since the lens, the digital back, the software controlling the camera and the digital image processing provide a wide range of possibilities, there is necessary to standardize the methods used in the reproduction work leading to preserve as high as possible the original item properties. This work presents an overview about methods used for camera system characterization, as well as the best procedures in order to identify and counteract the effect of the lens residual aberrations, sensor aliasing, image illumination, color management and image optimization by means of parametric image processing. As a corollary, the work shows some examples of reproduction workflow applied to the digitization of valuable art pieces and glass plate photographic black and white negatives.

  20. Integrating multi-view transmission system into MPEG-21 stereoscopic and multi-view DIA (digital item adaptation)

    Science.gov (United States)

    Lee, Seungwon; Park, Ilkwon; Kim, Manbae; Byun, Hyeran

    2006-10-01

    As digital broadcasting technologies have been rapidly progressed, users' expectations for realistic and interactive broadcasting services also have been increased. As one of such services, 3D multi-view broadcasting has received much attention recently. In general, all the view sequences acquired at the server are transmitted to the client. Then, the user can select a part of views or all the views according to display capabilities. However, this kind of system requires high processing power of the server as well as the client, thus posing a difficulty in practical applications. To overcome this problem, a relatively simple method is to transmit only two view-sequences requested by the client in order to deliver a stereoscopic video. In this system, effective communication between the server and the client is one of important aspects. In this paper, we propose an efficient multi-view system that transmits two view-sequences and their depth maps according to user's request. The view selection process is integrated into MPEG-21 DIA (Digital Item Adaptation) so that our system is compatible to MPEG-21 multimedia framework. DIA is generally composed of resource adaptation and descriptor adaptation. It is one of merits that SVA (stereoscopic video adaptation) descriptors defined in DIA standard are used to deliver users' preferences and device capabilities. Furthermore, multi-view descriptions related to multi-view camera and system are newly introduced. The syntax of the descriptions and their elements is represented in XML (eXtensible Markup Language) schema. If the client requests an adapted descriptor (e.g., view numbers) to the server, then the server sends its associated view sequences. Finally, we present a method which can reduce user's visual discomfort that might occur while viewing stereoscopic video. This phenomenon happens when view changes as well as when a stereoscopic image produces excessive disparity caused by a large baseline between two cameras. To

  1. An analysis of error patterns in children's backward digit recall in noise

    Science.gov (United States)

    Osman, Homira; Sullivan, Jessica R.

    2015-01-01

    The purpose of the study was to determine whether perceptual masking or cognitive processing accounts for a decline in working memory performance in the presence of competing speech. The types and patterns of errors made on the backward digit span in quiet and multitalker babble at -5 dB signal-to-noise ratio (SNR) were analyzed. The errors were classified into two categories: item (if digits that were not presented in a list were repeated) and order (if correct digits were repeated but in an incorrect order). Fifty five children with normal hearing were included. All the children were aged between 7 years and 10 years. Repeated measures of analysis of variance (RM-ANOVA) revealed the main effects for error type and digit span length. In terms of listening condition interaction it was found that the order errors occurred more frequently than item errors in the degraded listening condition compared to quiet. In addition, children had more difficulty recalling the correct order of intermediate items, supporting strong primacy and recency effects. Decline in children's working memory performance was not primarily related to perceptual difficulties alone. The majority of errors was related to the maintenance of sequential order information, which suggests that reduced performance in competing speech may result from increased cognitive processing demands in noise. PMID:26168949

  2. Digital Humanities and networked digital media

    DEFF Research Database (Denmark)

    Finnemann, Niels Ole

    2014-01-01

    This article discusses digital humanities and the growing diversity of digital media, digital materials and digital methods. The first section describes the humanities computing tradition formed around the interpretation of computation as a rule-based process connected to a concept of digital...... materials centred on the digitisation of non-digital, finite works, corpora and oeuvres. The second section discusses “the big tent” of contemporary digital humanities. It is argued that there can be no unifying interpretation of digital humanities above the level of studying digital materials with the help...... of software-supported methods. This is so, in part, because of the complexity of the world and, in part, because digital media remain open to the projection of new epistemologies onto the functional architecture of these media. The third section discusses the heterogeneous character of digital materials...

  3. An analysis of error patterns in children′s backward digit recall in noise

    Directory of Open Access Journals (Sweden)

    Homira Osman

    2015-01-01

    Full Text Available The purpose of the study was to determine whether perceptual masking or cognitive processing accounts for a decline in working memory performance in the presence of competing speech. The types and patterns of errors made on the backward digit span in quiet and multitalker babble at -5 dB signal-to-noise ratio (SNR were analyzed. The errors were classified into two categories: item (if digits that were not presented in a list were repeated and order (if correct digits were repeated but in an incorrect order. Fifty five children with normal hearing were included. All the children were aged between 7 years and 10 years. Repeated measures of analysis of variance (RM-ANOVA revealed the main effects for error type and digit span length. In terms of listening condition interaction, it was found that the order errors occurred more frequently than item errors in the degraded listening condition compared to quiet. In addition, children had more difficulty recalling the correct order of intermediate items, supporting strong primacy and recency effects. Decline in children′s working memory performance was not primarily related to perceptual difficulties alone. The majority of errors was related to the maintenance of sequential order information, which suggests that reduced performance in competing speech may result from increased cognitive processing demands in noise.

  4. Future-proofing pathology part 2: building a business case for digital pathology.

    Science.gov (United States)

    Williams, Bethany Jill; Bottoms, David; Clark, David; Treanor, Darren

    2018-03-16

    Diagnostic histopathology departments are experiencing unprecedented economic and service pressures, and many institutions are now considering digital pathology as part of the solution. In this document, a follow on to our case for adoption report, we provide information and advice to help departments create their own clear, succinct, individualised business case for the clinical deployment of digital pathology. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

  5. Development of critical digital review procedure

    International Nuclear Information System (INIS)

    Huang Huiwen; Liao Benching; Tseng Maosheng; Chung Hsianghan; Cheng Tsungchieh; Chen Minghuei

    2011-01-01

    This paper describes the critical digital review (CDR) procedure, which was developed by Institute of Nuclear Energy Research (INER), and sponsored by Taiwan Power Company (TPC). A preliminary CDR application experience which was performed by INER, is also described in this paper. Currently, CDR becomes one of the policies for digital Instrumentation and Control (I and C) system replacement in TPC. The contents of this CDR procedure include: Scope, Responsibility, Operation Procedure, Operation Flow Chart, CDR review items. The 'CDR Review Items' chapter proposes optional review items, including the comparison of the design change, Software Verification and Validation (SV and V), Failure Mode and Effects Analysis (FMEA), Evaluation of Watchdog Timer, Evaluation of Electromagnetic Compatibility (EMC), Evaluation of Grounding for System/Component, Seismic Evaluation, HFE Evaluation, Witness and Inspection, Lessons Learnt from the Digital I and C Failure Events. Since CDR has become a TPC policy, Chin Shan Nuclear Power Plant (NPP) performed the CDR practice of Automatic Voltage Regulator (AVR) digital I and C replacement, even though the project had been on the half way. The major review items of this CDR were: the comparison of the design change, SV and V, FMEA, Evaluation of Watchdog Timer, Evaluation of Electromagnetic Compatibility (EMC), Evaluation of Grounding for System/ Component, Witness and Inspection, Lessons Learnt from the Digital I and C Failure Events. The experience of the CDR showed the importance of preparation of the documents by the vendor. This means the communication with the vendors for the bid preparation is crucial. (author)

  6. Heuristics for multi-item two-echelon spare parts inventory control subject to aggregate and individual service measures

    NARCIS (Netherlands)

    Topan, E.; Bayindir, Z.P.; Tan, T.

    2017-01-01

    We consider a multi-item two-echelon spare parts inventory system in which the central warehouse operates under a (Q, R) policy and local warehouses implement (S−1,S) policy. The objective is to find the policy parameters minimizing expected system-wide inventory holding and fixed ordering subject

  7. Comparison on Computed Tomography using industrial items

    DEFF Research Database (Denmark)

    Angel, Jais Andreas Breusch; De Chiffre, Leonardo

    2014-01-01

    In a comparison involving 27 laboratories from 8 countries, measurements on two common industrial items, a polymer part and a metal part, were carried out using X-ray Computed Tomography. All items were measured using coordinate measuring machines before and after circulation, with reference...

  8. Digital and preliminary bedrock geologic map of the Vermont part of the Hartland quadrangle, Windsor County, Vermont

    Data.gov (United States)

    Vermont Center for Geographic Information — Digital Data from VG98-123A Walsh, G. J., 1998,�Digital and preliminary bedrock geologic map of the Vermont part of the Hartland quadrangle, Windsor County, Vermont:...

  9. The Emperor’s New Augmented Clothes. Digital Objects as Part of the Every Day

    Directory of Open Access Journals (Sweden)

    Nicola Liberati

    2017-10-01

    Full Text Available The main aim of this work is to solve a problem that Augmented Reality is facing by using phenomenological and phenomenological analyses and projectors. Augmented reality seeks to merge the digital and real world by producing a mixed reality where the digital objects are usually visualised thanks to the head mounted or mobile devices. However, this technology is facing problems because the objects generated by the digital devices are existing merely inside the small group of people while using specific devices. Therefore, these objects look fictitious for the other members of the society who are not using them. In order to analyse the elements which make these objects fictitious for the other member of the society, we will take into account the story of The Emperor’s new clothes because, even in this story, there are fictional entities not perceivable by other members of the community. Thanks to this story, it will be possible to highlight some elements which make the objects part of the everyday world. Moreover, it will show how the intersubjectivity of these objects is directly related to their way of being perceived by the subjects and, in the case of augmented reality, to the devices used to make them perceivable. For this reason, it is possible to solve the problem Augmented Reality is facing by changing the devices used to produce these digital objects. At the end of the work, we will propose a project which can solve the problem by following the elements previously highlighted. We will show how, thanks to wearable projectors, it is possible to produce digital clothes as part of the everyday world of every subject. Thanks to these digital clothes people will be able to wear the digital objects as if they were common, usual objects without being naked.

  10. 7 CFR 65.220 - Processed food item.

    Science.gov (United States)

    2010-01-01

    ... extruding). Examples of items excluded include teriyaki flavored pork loin, roasted peanuts, breaded chicken... OF BEEF, PORK, LAMB, CHICKEN, GOAT MEAT, PERISHABLE AGRICULTURAL COMMODITIES, MACADAMIA NUTS, PECANS... includes cooking (e.g., frying, broiling, grilling, boiling, steaming, baking, roasting), curing (e.g...

  11. Compare the user interface of digital libraries\\' websites between the developing and developed countries in content analysis method

    Directory of Open Access Journals (Sweden)

    Gholam Abbas Mousavi

    2017-03-01

    Full Text Available Purpose: This study performed with goals of determining the Items in designing and developing the user interface of digital libraries' websites and to determine the best digital libraries' websites and discuss their advantages and disadvantages; to analyze and compare digital libraries' websites in developing countries with those in the developed countries. Methodology: to do so, 50 digital libraries' websites were selected by purposive sampling method. By analyzing the level of development of the countries in the sample regarding their digital libraries' websites, 12 websites were classified as belonging to developing and 38 countries to developed counties. Then, their content was studied by using a qualitative content analysis. The study was conducted by using a research-constructed checklist containing 12 main categories and 44 items, whose validity was decided by content validity method. The data was analyzed in SPSS (version 16. Findings: The results showed that in terms of “online resources”, “library collection,” and “navigation”, there is a significant relationship between the digital library' user interface design in both types of countries. Results: The items of “online public access catalogue (OPAC” and “visits statistics” were observed in more developing countries’ digital libraries' websites. However, the item of “menu and submenus to introduce library' sections” was presented in more developed countries’ digital libraries' websites. Moreover, by analyzing the number of items in the selected websites, “American Memory” with 44 items, “International Children Digital Library” with 40 items, and “California” with 39 items were the best, and “Berkeley Sun Site” with 10 items was the worst website. Despite more and better quality digital libraries in developed countries, the quality of digital libraries websites in developing countries is considerable. In general, some of the newly established

  12. Dietary items as possible sources of "1"3"7Cs in large carnivores in the Gorski Kotar forest ecosystem, Western Croatia

    International Nuclear Information System (INIS)

    Šprem, Nikica; Piria, Marina; Barišić, Domagoj; Kusak, Josip; Barišić, Delko

    2016-01-01

    The mountain forest ecosystem of Gorski Kotar is distant from any significant sources of environmental pollution, though recent findings have revealed that this region is among the most intense "1"3"7Cs contaminated area in Croatia. Therefore, the aim of this study was to investigate "1"3"7Cs and "4"0K load in three large predator species in the mountain forest ecosystem. Radionuclides mass activities were determined by the gamma-spectrometric method in the muscle tissue of brown bear (47), wolf (7), lynx (1) and golden jackal (2). The highest "1"3"7Cs mass activity was found in lynx (153 Bq kg"−"1), followed by brown bear (132 Bq kg"−"1), wolf (22.2 Bq kg"−"1), and golden jackal (2.48 Bq kg"−"1). Analysis of 63 samples of dietary items suggests that they are not all potentially dominant sources of "1"3"7Cs for wildlife. The most important source of radionuclides for the higher parts of the food-chain from the study area were found to be the mushroom species wood hedgehog (Hydnum repandum), with a transfer factor TF of 5.166, and blueberry (Vaccinium myrtillus) as a plant species (TF = 2.096). Food items of animal origin indicated higher mass activity of radionuclides and therefore are possible moderate bioindicators of environmental pollution. The results also revealed that possible unknown wild animal food sources are a caesium source in the study region, and further study is required to illuminate this issue. - Highlights: • Radionuclide mass activities were determined by the gamma-spectrometric method. • The highest "1"3"7Cs mass activity in brown bear was 132, wolf 22.2 and lynx 153 Bq kg"−"1. • The best bioindicators are a wood hedgehog (TF = 5.166) and blueberry (TF = 2.096).

  13. Similar digit-based working memory in deaf signers and hearing non-signers despite digit span differences

    Directory of Open Access Journals (Sweden)

    Josefine eAndin

    2013-12-01

    Full Text Available Similar working memory (WM for lexical items has been demonstrated for signers and non-signers while short-term memory (STM is regularly poorer in deaf than hearing individuals. In the present study, we investigated digit-based WM and STM in Swedish and British deaf signers and hearing non-signers. To maintain good experimental control we used printed stimuli throughout and held response mode constant across groups. We showed that deaf signers have similar digit-based WM performance, despite shorter digit spans, compared to well-matched hearing non-signers. We found no difference between signers and non-signers on STM span for letters chosen to minimize phonological similarity or in the effects of recall direction. This set of findings indicates that similar WM for signers and non-signers can be generalized from lexical items to digits and suggests that poorer STM in deaf signers compared to hearing non-signers may be due to differences in phonological similarity across the language modalities of sign and speech.

  14. A Human Error Analysis with Physiological Signals during Utilizing Digital Devices

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Yong Hee; Oh, Yeon Ju; Shin, Kwang Hyeon [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2011-10-15

    The introduction of advanced MCR is accompanied with lots of changes and different forms and features through the virtue of new digital technologies. There are various kinds of digital devices such as flat panel displays, touch screens, and so on. The characteristics of these digital devices give many chances to the interface management, and can be integrated into a compact single workstation in an advanced MCR so that workers can operate the plant with minimum burden during any operating condition. However, these devices may introduce new types of human errors, and thus we need a means to evaluate and prevent such error, especially those related to the digital devices. Human errors have been retrospectively assessed for accident reviews and quantitatively evaluated through HRA for PSA. However, the ergonomic verification and validation is an important process to defend all human error potential in the NPP design. HRA is a crucial part of a PSA, and helps in preparing a countermeasure for design by drawing potential human error items that affect the overall safety of NPPs. Various HRA techniques are available however: they reveal shortages of the HMI design in the digital era. - HRA techniques depend on PSFs: this means that the scope dealing with human factors is previously limited, and thus all attributes of new digital devices may not be considered in HRA. - The data used to HRA are not close to the evaluation items. So, human error analysis is not easy to apply to design by several individual experiments and cases. - The results of HRA are not statistically meaningful because accidents including human errors in NPPs are rare and have been estimated as having an extremely low probability

  15. Software Note: Using BILOG for Fixed-Anchor Item Calibration

    Science.gov (United States)

    DeMars, Christine E.; Jurich, Daniel P.

    2012-01-01

    The nonequivalent groups anchor test (NEAT) design is often used to scale item parameters from two different test forms. A subset of items, called the anchor items or common items, are administered as part of both test forms. These items are used to adjust the item calibrations for any differences in the ability distributions of the groups taking…

  16. Integration technique of digital I and C replacement and its Critical Digital Review procedure

    International Nuclear Information System (INIS)

    Huang, Hui-Wen; Yang, Wen-Long

    2013-01-01

    Highlights: ► A digital I and C replacement integration technique have been developed. ► Establishment of Nuclear Power Plant Digital Replacement Integration Guideline. ► Preliminary Investigation on I and C System Digitalization. ► Evaluation on I and C System Digitalization. ► Establishment of I and C System Digitalization Architectures. -- Abstract: Institute of Nuclear Energy Research (INER) developed a digital Instrumentation and Control (I and C) replacement integration technique on the basis of requirement of the three existing nuclear power plants (NPPs), which are Chin–Shan (CS) NPP, Kuo–Sheng (KS) NPP, and Maanshan (MS) NPP, in Taiwan, and also developed the related Critical Digital Review (CDR) procedure. The digital I and C replacement integration technique includes: (1) Establishment of Nuclear Power Plant Digital Replacement Integration Guideline, (2) Preliminary Investigation on I and C System Digitalization, (3) Evaluation on I and C System Digitalization, and (4) Establishment of I and C System Digitalization Architectures. These works can be a reference for performing I and C system digital replacement integration of the three existing NPPs of Taiwan Power Company (TPC). A CDR is the review for a critical system digital I and C replacement. The major reference of this procedure is EPRI TR-1011710 (2005) “Handbook for Evaluating Critical Digital Equipment and Systems” which was published by the Electric Power Research Institute (EPRI). With this document, INER developed a TPC-specific CDR procedure. Currently, CDR becomes one of the policies for digital I and C replacement in TPC. The contents of this CDR procedure include: Scope, Responsibility, Operation Procedure, Operation Flow Chart, CDR review items. The CDR review items include the comparison of the design change, Software Verification and Validation (SV and V), Failure Mode and Effects Analysis (FMEA), Evaluation of Diversity and Defense-in-depth (D3), Evaluation of

  17. Digital test assembly of truck parts with the IMMA-tool--an illustrative case.

    Science.gov (United States)

    Hanson, L; Högberg, D; Söderholm, M

    2012-01-01

    Several digital human modelling (DHM) tools have been developed for simulation and visualisation of human postures and motions. In 2010 the DHM tool IMMA (Intelligently Moving Manikins) was introduced as a DHM tool that uses advanced path planning techniques to generate collision free and biomechanically acceptable motions for digital human models (as well as parts) in complex assembly situations. The aim of the paper is to illustrate how the IPS/IMMA tool is used at Scania CV AB in a digital test assembly process, and to compare the tool with other DHM tools on the market. The illustrated case of using the IMMA tool, here combined with the path planner tool IPS, indicates that the tool is promising. The major strengths of the tool are its user friendly interface, the motion generation algorithms, the batch simulation of manikins and the ergonomics assessment methods that consider time.

  18. Report from the research committee of digital imaging standardization in nuclear medicine

    International Nuclear Information System (INIS)

    Nakamura, Yutaka; Ise, Toshihide; Isetani, Osamu; Ichihara, Takashi; Ohya, Nobuyoshi; Kanaya, Shinichi; Fukuda, Toshio; Horii, Hitoshi.

    1994-01-01

    Since digital scintillation camera systems were developed in 1982, digital imaging is rapidly replacing analog imaging. During the first year, the research committee of digital imaging standardization has collected and analyzed basic data concerning digital examination equipment systems, display equipments, films, and hardware and software techniques to determine items required for the standardization of digital imaging. During the second year, it has done basic phantom studies to assess digital images and analyzed the results from both physical and visual viewpoints. On the basis of the outcome of the research committee's activities and the nationwide survey, the draft of digital imaging standardization in nuclear medicine has been presented. In this paper. the analytical data of the two-year survey, made by the research committee of digital imaging standardization, are presented. The descriptions are given under the following four items: (1) standardization digital examination techniques, (2) standardization of display techniques, (3) the count and pixel of digital images, and (4) standardization of digital imaging techniques. (N.K.)

  19. 15 CFR Supplement No. 1 to Part 748 - BIS-748P, BIS-748P-A; Item Appendix, and BIS-748P-B; End-User Appendix; Multipurpose Application...

    Science.gov (United States)

    2010-01-01

    ... “mass market” encryption provisions (§ 742.15(b)(2) of the EAR), mark the Box labeled “Classification...” (“APP”) in this Block if your application includes a digital computer or equipment containing a computer... shown as “N/A” on the CCL. (g) Unit Price. Provide the fair market value of the items you wish to export...

  20. Benchmarking the performance of fixed-image receptor digital radiography systems. Part 2: system performance metric.

    Science.gov (United States)

    Lee, Kam L; Bernardo, Michael; Ireland, Timothy A

    2016-06-01

    This is part two of a two-part study in benchmarking system performance of fixed digital radiographic systems. The study compares the system performance of seven fixed digital radiography systems based on quantitative metrics like modulation transfer function (sMTF), normalised noise power spectrum (sNNPS), detective quantum efficiency (sDQE) and entrance surface air kerma (ESAK). It was found that the most efficient image receptors (greatest sDQE) were not necessarily operating at the lowest ESAK. In part one of this study, sMTF is shown to depend on system configuration while sNNPS is shown to be relatively consistent across systems. Systems are ranked on their signal-to-noise ratio efficiency (sDQE) and their ESAK. Systems using the same equipment configuration do not necessarily have the same system performance. This implies radiographic practice at the site will have an impact on the overall system performance. In general, systems are more dose efficient at low dose settings.

  1. Metadata Effectiveness in Internet Discovery: An Analysis of Digital Collection Metadata Elements and Internet Search Engine Keywords

    Science.gov (United States)

    Yang, Le

    2016-01-01

    This study analyzed digital item metadata and keywords from Internet search engines to learn what metadata elements actually facilitate discovery of digital collections through Internet keyword searching and how significantly each metadata element affects the discovery of items in a digital repository. The study found that keywords from Internet…

  2. Digital karyotyping reveals probable target genes at 7q21.3 locus in hepatocellular carcinoma

    Directory of Open Access Journals (Sweden)

    Wang Shengyue

    2011-07-01

    Full Text Available Abstract Background Hepatocellular carcinoma (HCC is a worldwide malignant liver tumor with high incidence in China. Subchromosomal amplifications and deletions accounted for major genomic alterations occurred in HCC. Digital karyotyping was an effective method for analyzing genome-wide chromosomal aberrations at high resolution. Methods A digital karyotyping library of HCC was constructed and 454 Genome Sequencer FLX System (Roche was applied in large scale sequencing of the library. Digital Karyotyping Data Viewer software was used to analyze genomic amplifications and deletions. Genomic amplifications of genes detected by digital karyotyping were examined by real-time quantitative PCR. The mRNA expression level of these genes in tumorous and paired nontumorous tissues was also detected by real-time quantitative RT-PCR. Results A total of 821,252 genomic tags were obtained from the digital karyotyping library of HCC, with 529,162 tags (64% mapped to unique loci of human genome. Multiple subchromosomal amplifications and deletions were detected through analyzing the digital karyotyping data, among which the amplification of 7q21.3 drew our special attention. Validation of genes harbored within amplicons at 7q21.3 locus revealed that genomic amplification of SGCE, PEG10, DYNC1I1 and SLC25A13 occurred in 11 (21%, 11 (21%, 11 (21% and 23 (44% of the 52 HCC samples respectively. Furthermore, the mRNA expression level of SGCE, PEG10 and DYNC1I1 were significantly up-regulated in tumorous liver tissues compared with corresponding nontumorous counterparts. Conclusions Our results indicated that subchromosomal region of 7q21.3 was amplified in HCC, and SGCE, PEG10 and DYNC1I1 were probable protooncogenes located within the 7q21.3 locus.

  3. Clinical evaluation of digital radiography based on a large-area cesium iodide-amorphous silicon flat-panel detector compared with screen-film radiography for skeletal system and abdomen

    International Nuclear Information System (INIS)

    Okamura, Terue; Tanaka, Saori; Koyama, Koichi; Norihumi, Nishida; Daikokuya, Hideo; Matsuoka, Toshiyuki; Yamada, Ryusaku; Kishimoto, Kenji; Hatagawa, Masakatsu; Kudoh, Hiroaki

    2002-01-01

    The aim of this clinical study was to compare the image quality of digital radiography using the new digital Bucky system based on a flat-panel detector with that of a conventional screen-film system for the skeletal structure and the abdomen. Fifty patients were examined using digital radiography with a flat-panel detector and screen-film systems, 25 for the skeletal structures and 25 for the abdomen. Six radiologists judged each paired image acquired under the same exposure parameters concerning three observation items for the bone and six items for the abdomen. Digital radiographic images for the bone were evaluated to be similar to screen-film images at the mean of 42.2%, to be superior at 50.2%, and to be inferior at 7.6%. Digital radiographic images for the abdomen were judged to be similar to screen-film images at the mean of 43.4%, superior at 52.4%, and inferior at 4.2%; thus, digital radiographic images were estimated to be either similar as or superior to screen-film images at over 92% for the bone and abdomen. On the statistical analysis, digital radiographic images were also judged to be preferred significantly in the most items for the bone and abdomen. In conclusion, the image quality of digital radiography with a flat-panel detector was superior to that of a screen-film system under the same exposure parameters, suggesting that dose reduction is possible with digital radiography. (orig.)

  4. Evaluation of item candidates for a diabetic retinopathy quality of life item bank.

    Science.gov (United States)

    Fenwick, Eva K; Pesudovs, Konrad; Khadka, Jyoti; Rees, Gwyn; Wong, Tien Y; Lamoureux, Ecosse L

    2013-09-01

    We are developing an item bank assessing the impact of diabetic retinopathy (DR) on quality of life (QoL) using a rigorous multi-staged process combining qualitative and quantitative methods. We describe here the first two qualitative phases: content development and item evaluation. After a comprehensive literature review, items were generated from four sources: (1) 34 previously validated patient-reported outcome measures; (2) five published qualitative articles; (3) eight focus groups and 18 semi-structured interviews with 57 DR patients; and (4) seven semi-structured interviews with diabetes or ophthalmic experts. Items were then evaluated during 3 stages, namely binning (grouping) and winnowing (reduction) based on key criteria and panel consensus; development of item stems and response options; and pre-testing of items via cognitive interviews with patients. The content development phase yielded 1,165 unique items across 7 QoL domains. After 3 sessions of binning and winnowing, items were reduced to a minimally representative set (n = 312) across 9 domains of QoL: visual symptoms; ocular surface symptoms; activity limitation; mobility; emotional; health concerns; social; convenience; and economic. After 8 cognitive interviews, 42 items were amended resulting in a final set of 314 items. We have employed a systematic approach to develop items for a DR-specific QoL item bank. The psychometric properties of the nine QoL subscales will be assessed using Rasch analysis. The resulting validated item bank will allow clinicians and researchers to better understand the QoL impact of DR and DR therapies from the patient's perspective.

  5. Customizable Digital Receivers for Radar

    Science.gov (United States)

    Moller, Delwyn; Heavey, Brandon; Sadowy, Gregory

    2008-01-01

    Compact, highly customizable digital receivers are being developed for the system described in 'Radar Interferometer for Topographic Mapping of Glaciers and Ice Sheets' (NPO-43962), NASA Tech Briefs, Vol. 31, No. 7 (August 2007), page 72. The receivers are required to operate in unison, sampling radar returns received by the antenna elements in a digital beam-forming (DBF) mode. The design of these receivers could also be adapted to commercial radar systems. At the time of reporting the information for this article, there were no commercially available digital receivers capable of satisfying all of the operational requirements and compact enough to be mounted directly on the antenna elements. A provided figure depicts the overall system of which the digital receivers are parts. Each digital receiver includes an analog-to-digital converter (ADC), a demultiplexer (DMUX), and a field-programmable gate array (FPGA). The ADC effects 10-bit band-pass sampling of input signals having frequencies up to 3.5 GHz. The input samples are demultiplexed at a user-selectable rate of 1:2 or 1:4, then buffered in part of the FPGA that functions as a first-in/first-out (FIFO) memory. Another part of the FPGA serves as a controller for the ADC, DMUX, and FIFO memory and as an interface between (1) the rest of the receiver and (2) a front-panel data port (FPDP) bus, which is an industry-standard parallel data bus that has a high data-rate capability and multichannel configuration suitable for DBF. Still other parts of the FPGA in each receiver perform signal-processing functions. The digital receivers can be configured to operate in a stand-alone mode, or in a multichannel mode as needed for DBF. The customizability of the receiver makes it applicable to a broad range of system architectures. The capability for operation of receivers in either a stand-alone or a DBF mode enables the use of the receivers in an unprecedentedly wide variety of radar systems.

  6. Optical timing receiver for the NASA Spaceborne Ranging System. Part II: high precision event-timing digitizer

    Energy Technology Data Exchange (ETDEWEB)

    Leskovar, Branko; Turko, Bojan

    1978-08-01

    Position-resolution capabilities of the NASA Spaceborne Laser Ranging System are essentially determined by the timeresolution capabilities of its optical timing receiver. The optical timing receiver consists of a fast photoelectric device; (e.g., photomultiplier or an avalanche photodiode detector), a timing discriminator, a high-precision event-timing digitizer, and a signal-processing system. The time-resolution capabilities of the receiver are determined by the photoelectron time spread of the photoelectric device, the time walk and resolution characteristics of the timing discriminator, and the resolution of the event-timing digitizer. It is thus necessary to evaluate available fast photoelectronic devices with respect to the time-resolution capabilities, and to develop a very low time walk timing discriminator and a high-resolution event-timing digitizer to be used in the high-resolution spaceborne laser ranging system receiver. This part of the report describes the development of a high precision event-timing digitizer. The event-timing digitizer is basically a combination of a very accurate high resolution real time digital clock and an interval timer. The timing digitizer is a high resolution multiple stop clock, counting the time up to 131 days in 19.5 ps increments.

  7. 12 CFR 513.7 - Proceeding under this part.

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Proceeding under this part. 513.7 Section 513.7 Banks and Banking OFFICE OF THRIFT SUPERVISION, DEPARTMENT OF THE TREASURY PRACTICE BEFORE THE OFFICE § 513.7 Proceeding under this part. (a) All hearings required or permitted to be held under paragraphs...

  8. Digital and preliminary bedrock geologic map of the Townshend 7.5 x 15 minute quadrangle, Vermont

    Data.gov (United States)

    Vermont Center for Geographic Information — Digital Data from VG98-335A Armstrong, T.R., and Ratcliffe, N.M., 1998, Digital and preliminary bedrock geologic map of the Townshend 7.5 x 15 minute quadrangle,...

  9. 15 CFR Supplement No. 2 to Part 740 - Items That May Be Donated To Meet Basic Human Needs Under the Humanitarian License Exception

    Science.gov (United States)

    2010-01-01

    ... Basic Human Needs Under the Humanitarian License Exception No. Supplement No. 2 to Part 740 Commerce and... Supplement No. 2 to Part 740—Items That May Be Donated To Meet Basic Human Needs Under the Humanitarian... Medicines and Supplies (c) Clothes and Household Goods Bedding Clothes Cooking Utensils Fabric Personal...

  10. Digital Communication and Modulation

    DEFF Research Database (Denmark)

    Sørensen, John Aasted

    2011-01-01

    system. Having passed the course, the student will be able to accomplish the following, within the areas shown below: Model for Communication System. Prepare and explain the functional block in a digital communication system, corresponding to the specific course contents. Model for Communication Channel...... system.   Sessions in class with active participation by the students. The time will be divided between lectures and the students solving problems, including simulating digital communication building blocks in Matlab. Combines lectures and hands-on work. Semester: E2011 Extent: 7.5 ects......, the fundamental principles for modulation and detection in Gaussian noise is treated. This includes the principles for the determination of the bit-error rate for a digital communication system. During the course, a selection of small Matlab exercises are prepared, for simulation of parts of a communication...

  11. Digital Communication and Modulation

    DEFF Research Database (Denmark)

    Sørensen, John Aasted

    2011-01-01

    system. Having passed the course, the student will be able to accomplish the following, within the areas shown below: Model for Communication System. Prepare and explain the functional block in a digital communication system, corresponding to the specific course contents. Model for Communication Channel...... system. Sessions in class with active participation by the students. The time will be divided between lectures and the students solving problems, including simulating digital communication building blocks in Matlab. Combines lectures and hands-on work. Semester: F2011 Extent: 7.5 ects......, the fundamental principles for modulation and detection in Gaussian noise is treated. This includes the principles for the determination of the bit-error rate for a digital communication system. During the course, a selection of small Matlab exercises are prepared, for simulation of parts of a communication...

  12. Digital Natives and Digital Divide: Analysing Perspective for Emerging Pedagogy

    Science.gov (United States)

    Onye, Uriel U.; Du, Yunfei

    2016-01-01

    This paper addresses the concepts of digital natives and digital divide from the perspective of the digital outsiders (part of digital natives). It takes a critical look at the implications of available ICT in both developed and underdeveloped countries in the fight against digital divide. The major contribution to literature is by drawing…

  13. Comprehension of digital media

    International Nuclear Information System (INIS)

    Kim, Ju Hwan

    2008-11-01

    This book is divided four parts. The first part describes media and mark on sign and media, what is the sign?, interpretation of sign and semiotics. The second part is for production sign theory and origin of digital revolution such as the problem of origin of digital revolution, homogeneity of producing goods and sign : triple triangle model for production sign theory, triple triangle model for producing goods, triple triangle model of producing sign and triple triangle model of art works. The third parts deals with development of the media and meaning of digital revolution with four changes : invention of letter, appearance of printed media and establishment modernity, appearance electronic media and mess media and appearance of digital media. The last part mentions ontology of world wide web.

  14. Comprehension of digital media

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Ju Hwan

    2008-11-15

    This book is divided four parts. The first part describes media and mark on sign and media, what is the sign?, interpretation of sign and semiotics. The second part is for production sign theory and origin of digital revolution such as the problem of origin of digital revolution, homogeneity of producing goods and sign : triple triangle model for production sign theory, triple triangle model for producing goods, triple triangle model of producing sign and triple triangle model of art works. The third parts deals with development of the media and meaning of digital revolution with four changes : invention of letter, appearance of printed media and establishment modernity, appearance electronic media and mess media and appearance of digital media. The last part mentions ontology of world wide web.

  15. Simulation and Measurement of the Transmission Distortions of the Digital Television DVB-T/H Part 2: Hierarchical Modulation Performance

    Directory of Open Access Journals (Sweden)

    R. Stukavec

    2010-09-01

    Full Text Available The paper deals with the second part of results of the Czech Science Foundation research project that was aimed into the simulation and measurement of the transmission distortions of the digital terrestrial television according to DVB-T/H standards. In this part the hierarchical modulation performance characteristics and its simulation and laboratory measurements are presented. The paper deals with the hierarchical oriented COFDM modulator for the digital terrestrial television transmission and DVB-T/H standards and possible utilization of this technique in real broadcasting scenarios – fixed, portable and mobile digital TV, all in one TV channel. Impact of the hierarchical modulation on Modulation Error Rate from I/Q constellations and Bit Error Rates before and after Viterbi decoding in DVB-T/H signal decoding are evaluated and discussed.

  16. Digit Symbol Performance in Mild Dementia and Depression.

    Science.gov (United States)

    Hart, Robert P.; And Others

    1987-01-01

    Patients with mild dementia of the Alzheimer's type (DAT), patients with major depression, and normal control subjects completed the Wechsler Adult Intelligence Scale (WAIS) Digit Symbol test of incidental memory. Though mild DAT and depressed patients had equivalent deficits in psychomotor speed, DAT patients recalled fewer digit-symbol items.…

  17. 41 CFR 302-7.20 - If my HHG shipment includes an item (e.g., boat, trailer, ultralight vehicle) for which a weight...

    Science.gov (United States)

    2010-07-01

    ... includes an item (e.g., boat, trailer, ultralight vehicle) for which a weight additive is assessed by the...) General Rules § 302-7.20 If my HHG shipment includes an item (e.g., boat, trailer, ultralight vehicle) for which a weight additive is assessed by the HHG carrier, am I responsible for payment? If your HHG...

  18. 38 CFR 3.1606 - Transportation items.

    Science.gov (United States)

    2010-07-01

    ... 38 Pensions, Bonuses, and Veterans' Relief 1 2010-07-01 2010-07-01 false Transportation items. 3... Burial Benefits § 3.1606 Transportation items. The transportation costs of those persons who come within... shipment. (6) Cost of transportation by common carrier including amounts paid as Federal taxes. (7) Cost of...

  19. Geriatric Anxiety Scale: item response theory analysis, differential item functioning, and creation of a ten-item short form (GAS-10).

    Science.gov (United States)

    Mueller, Anne E; Segal, Daniel L; Gavett, Brandon; Marty, Meghan A; Yochim, Brian; June, Andrea; Coolidge, Frederick L

    2015-07-01

    The Geriatric Anxiety Scale (GAS; Segal et al. (Segal, D. L., June, A., Payne, M., Coolidge, F. L. and Yochim, B. (2010). Journal of Anxiety Disorders, 24, 709-714. doi:10.1016/j.janxdis.2010.05.002) is a self-report measure of anxiety that was designed to address unique issues associated with anxiety assessment in older adults. This study is the first to use item response theory (IRT) to examine the psychometric properties of a measure of anxiety in older adults. A large sample of older adults (n = 581; mean age = 72.32 years, SD = 7.64 years, range = 60 to 96 years; 64% women; 88% European American) completed the GAS. IRT properties were examined. The presence of differential item functioning (DIF) or measurement bias by age and sex was assessed, and a ten-item short form of the GAS (called the GAS-10) was created. All GAS items had discrimination parameters of 1.07 or greater. Items from the somatic subscale tended to have lower discrimination parameters than items on the cognitive or affective subscales. Two items were flagged for DIF, but the impact of the DIF was negligible. Women scored significantly higher than men on the GAS and its subscales. Participants in the young-old group (60 to 79 years old) scored significantly higher on the cognitive subscale than participants in the old-old group (80 years old and older). Results from the IRT analyses indicated that the GAS and GAS-10 have strong psychometric properties among older adults. We conclude by discussing implications and future research directions.

  20. Item-focussed Trees for the Identification of Items in Differential Item Functioning.

    Science.gov (United States)

    Tutz, Gerhard; Berger, Moritz

    2016-09-01

    A novel method for the identification of differential item functioning (DIF) by means of recursive partitioning techniques is proposed. We assume an extension of the Rasch model that allows for DIF being induced by an arbitrary number of covariates for each item. Recursive partitioning on the item level results in one tree for each item and leads to simultaneous selection of items and variables that induce DIF. For each item, it is possible to detect groups of subjects with different item difficulties, defined by combinations of characteristics that are not pre-specified. The way a DIF item is determined by covariates is visualized in a small tree and therefore easily accessible. An algorithm is proposed that is based on permutation tests. Various simulation studies, including the comparison with traditional approaches to identify items with DIF, show the applicability and the competitive performance of the method. Two applications illustrate the usefulness and the advantages of the new method.

  1. Digital asset ecosystems rethinking crowds and cloud

    CERN Document Server

    Blanke, Tobias

    2014-01-01

    Digital asset management is undergoing a fundamental transformation. Near universal availability of high-quality web-based assets makes it important to pay attention to the new world of digital ecosystems and what it means for managing, using and publishing digital assets. The Ecosystem of Digital Assets reflects on these developments and what the emerging 'web of things' could mean for digital assets. The book is structured into three parts, each covering an important aspect of digital assets. Part one introduces the emerging ecosystems of digital assets. Part two examines digital asset manag

  2. Digital Tectonic Tools

    DEFF Research Database (Denmark)

    Schmidt, Anne Marie Due

    2005-01-01

    Tectonics has been an inherent part of the architectural field since the Greek temples while the digital media is new to the field. This paper is built on the assumption that in the intermediate zone between the two there is a lot to be learned about architecture in general and the digital media...... in particular. A model of the aspects in the term tectonics – epresentation, ontology and culture – will be presented and used to discuss the current digital tools’ ability in tectonics. Furthermore it will be discussed what a digital tectonic tool is and could be and how a connection between the digital...... and tectonic could become a part of the architectural education....

  3. Item-Based Top-N Recommendation Algorithms

    Science.gov (United States)

    2003-01-20

    basket of items, utilized by many e-commerce sites, cannot take advantage of pre-computed user-to-user similarities. Finally, even though the...not discriminate between items that are present in frequent itemsets and items that are not, while still maintaining the computational advantages of...453219 0.02% 7.74 ccard 42629 68793 398619 0.01% 9.35 ecommerce 6667 17491 91222 0.08% 13.68 em 8002 1648 769311 5.83% 96.14 ml 943 1682 100000 6.31

  4. Introduction to Psychology and Leadership. Part Nine; Morale and Esprit De Corps. Progress Check. Test Item Pool. Segments I & II.

    Science.gov (United States)

    Westinghouse Learning Corp., Annapolis, MD.

    Test items for the introduction to psychology and leadership course (see the final reports which summarize the course development project, EM 010 418, EM 010 419, and EM 010 484) which were compiled as part of the project documentation and which are coordinated with the text-workbook on morale and esprit de corps (EM 010 439, EM 010 440, and EM…

  5. 7 CFR 1200.18 - Ex parte communications.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 10 2010-01-01 2010-01-01 false Ex parte communications. 1200.18 Section 1200.18 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (MARKETING... Governing Proceedings To Formulate and Amend an Order § 1200.18 Ex parte communications. (a) At no stage of...

  6. EDUCATION IN TIMES NET GENERATION: HOW DIGITAL IMMIGRANTS CAN TEACH DIGITAL NATIVES

    Directory of Open Access Journals (Sweden)

    Hamilton Viana Chaves

    2016-04-01

    Full Text Available Members of the knowledge society, of the network society or of the informatics society are some names that seem to define the current generation. Net generation is a generic nomenclature which covers all the previous terms. Digital immigrants are the subjects whom were born before the advent of digital technologies and who joined to them. Digital natives are the subjects whom were born in the current generation and that would have special qualities, especially regarding the learning process. Considering all this context, a question arises: how the digital immigrants teach the digital natives? This item justifies itself because there is a meeting of generations, in theory, significantly differentiated. Due to this, it would be necessary to identify the appropriate educational forms according to the presented situation. Our teaching experience convinces us that, yes, we should valorize the information’s technologies and communication, understanding that these are means, not ends. It is important to highlight that any tool causes advances and regressions, a fact that serves to guide our teaching practice.

  7. Young Boys Playing Digital Games. From Console to the Playground.

    OpenAIRE

    Pål Aarsand

    2010-01-01

    This article studies how digital games are part of the everyday lives of Swedish 6 to 7-year-old boys. The data consist of video recordings from two schools, two after-school centres and four homes. The focus is on how children engage in, organize and use digital games in face-to-face interaction. It is argued that digital game competence matters not only in front of the screen, but also in the playground. In addition, it is argued that what counts as game competence is negotiated in the peer...

  8. Digital signal processing an experimental approach

    CERN Document Server

    Engelberg, Shlomo

    2008-01-01

    Digital Signal Processing is a mathematically rigorous but accessible treatment of digital signal processing that intertwines basic theoretical techniques with hands-on laboratory instruction. Divided into three parts, the book covers various aspects of the digital signal processing (DSP) ""problem."" It begins with the analysis of discrete-time signals and explains sampling and the use of the discrete and fast Fourier transforms. The second part of the book???covering digital to analog and analog to digital conversion???provides a practical interlude in the mathematical content before Part II

  9. Psychometric properties of the 7-item game addiction scale among french and German speaking adults

    OpenAIRE

    Khazaal, Yasser; Chatton, Anne; Rothen, Stephane; Achab, Sophia; Thorens, Gabriel; Zullino, Daniele; Gmel, Gerhard

    2016-01-01

    Background The 7-item Game Addiction Scale (GAS) is a used to screen for addictive game use. Both cross cross-linguistic validation and validation in French and German is needed in adult samples. The objective of the study is to assess the factorial structure of the French and German versions of the GAS among adults. Methods Two samples of men from French (N?=?3318) and German (N?=?2665) language areas of Switzerland were assessed with the GAS, the Major Depression Inventory (MDI), the Brief ...

  10. Digital I and C system upgrade integration technique

    Energy Technology Data Exchange (ETDEWEB)

    Huang, H. W. [Inst. of Nuclear Energy Research (INER), No. 1000, Wenhua Road, Chiaan Village, Longtan Township, Taoyuan County, 32546, Taiwan (China); Shih, C. [Inst. of Nuclear Engineering and Science, National Tsing Hua Univ., 101, Sec. 2, Kuang Fu Rd, Hsinchu, Taiwan (China); Wang, J. R. [Inst. of Nuclear Energy Research (INER), No. 1000, Wenhua Road, Chiaan Village, Longtan Township, Taoyuan County, 32546, Taiwan (China); Huang, K. C. [Inst. of Nuclear Engineering and Science, National Tsing Hua Univ., 101, Sec. 2, Kuang Fu Rd, Hsinchu, Taiwan (China)

    2012-07-01

    This work developed an integration technique for digital I and C system upgrade, the utility can replace the I and C systems step by step systematically by this method. Inst. of Nuclear Energy Research (INER) developed a digital Instrumentation and Control (I and C) replacement integration technique on the basis of requirement of the three existing nuclear power plants (NPPs), which are Chin-Shan (CS) NPP, Kuo-Sheng (KS) NPP, and Maanshan (MS) NPP, in Taiwan, and also developed the related Critical Digital Review (CDR) Procedure. The digital I and C replacement integration technique includes: (I) Establishment of Nuclear Power Plant Digital Replacement Integration Guideline, (2) Preliminary Investigation on I and C System Digitalization, (3) Evaluation on I and C System Digitalization, and (4) Establishment of I and C System Digitalization Architectures. These works can be a reference for performing I and C system digital replacement integration of the three existing NPPs of Taiwan Power Company (TPC). A CDR is the review for a critical system digital I and C replacement. The major reference of this procedure is EPRI TR- 1011710 (2005) 'Handbook for Evaluating Critical Digital Equipment and Systems' which was published by the Electric Power Research Inst. (EPRI). With this document, INER developed a TPC-specific CDR procedure. Currently, CDR becomes one of the policies for digital I and C replacement in TPC. The contents of this CDR procedure include: Scope, Responsibility, Operation Procedure, Operation Flow Chart, CDR review items. The CDR review items include the comparison of the design change, Software Verification and Validation (SVandV), Failure Mode and Effects Analysis (FMEA), Evaluation of Diversity and Defense-in-depth (D3), Evaluation of Watchdog Timer, Evaluation of Electromagnetic Compatibility (EMC), Evaluation of Grounding for System/Component, Seismic Evaluation, Witness and Inspection, Lessons Learnt from the Digital I and C Failure

  11. Digital I and C system upgrade integration technique

    International Nuclear Information System (INIS)

    Huang, H. W.; Shih, C.; Wang, J. R.; Huang, K. C.

    2012-01-01

    This work developed an integration technique for digital I and C system upgrade, the utility can replace the I and C systems step by step systematically by this method. Inst. of Nuclear Energy Research (INER) developed a digital Instrumentation and Control (I and C) replacement integration technique on the basis of requirement of the three existing nuclear power plants (NPPs), which are Chin-Shan (CS) NPP, Kuo-Sheng (KS) NPP, and Maanshan (MS) NPP, in Taiwan, and also developed the related Critical Digital Review (CDR) Procedure. The digital I and C replacement integration technique includes: (I) Establishment of Nuclear Power Plant Digital Replacement Integration Guideline, (2) Preliminary Investigation on I and C System Digitalization, (3) Evaluation on I and C System Digitalization, and (4) Establishment of I and C System Digitalization Architectures. These works can be a reference for performing I and C system digital replacement integration of the three existing NPPs of Taiwan Power Company (TPC). A CDR is the review for a critical system digital I and C replacement. The major reference of this procedure is EPRI TR- 1011710 (2005) 'Handbook for Evaluating Critical Digital Equipment and Systems' which was published by the Electric Power Research Inst. (EPRI). With this document, INER developed a TPC-specific CDR procedure. Currently, CDR becomes one of the policies for digital I and C replacement in TPC. The contents of this CDR procedure include: Scope, Responsibility, Operation Procedure, Operation Flow Chart, CDR review items. The CDR review items include the comparison of the design change, Software Verification and Validation (SVandV), Failure Mode and Effects Analysis (FMEA), Evaluation of Diversity and Defense-in-depth (D3), Evaluation of Watchdog Timer, Evaluation of Electromagnetic Compatibility (EMC), Evaluation of Grounding for System/Component, Seismic Evaluation, Witness and Inspection, Lessons Learnt from the Digital I and C Failure Events. A

  12. A Call to Digital Health Practitioners: New Guidelines Can Help Improve the Quality of Digital Health Evidence.

    Science.gov (United States)

    Agarwal, Smisha; Lefevre, Amnesty E; Labrique, Alain B

    2017-10-06

    Despite the rapid proliferation of health interventions that employ digital tools, the evidence on the effectiveness of such approaches remains insufficient and of variable quality. To address gaps in the comprehensiveness and quality of reporting on the effectiveness of digital programs, the mHealth Technical Evidence Review Group (mTERG), convened by the World Health Organization, proposed the mHealth Evidence Reporting and Assessment (mERA) checklist to address existing gaps in the comprehensiveness and quality of reporting on the effectiveness of digital health programs. We present an overview of the mERA checklist and encourage researchers working in the digital health space to use the mERA checklist for reporting their research. The development of the mERA checklist consisted of convening an expert group to recommend an appropriate approach, convening a global expert review panel for checklist development, and pilot-testing the checklist. The mERA checklist consists of 16 core mHealth items that define what the mHealth intervention is (content), where it is being implemented (context), and how it was implemented (technical features). Additionally, a 29-item methodology checklist guides authors on reporting critical aspects of the research methodology employed in the study. We recommend that the core mERA checklist is used in conjunction with an appropriate study-design specific checklist. The mERA checklist aims to assist authors in reporting on digital health research, guide reviewers and policymakers in synthesizing evidence, and guide journal editors in assessing the completeness in reporting on digital health studies. An increase in transparent and rigorous reporting can help identify gaps in the conduct of research and understand the effects of digital health interventions as a field of inquiry. ©Smisha Agarwal, Amnesty E Lefevre, Alain B Labrique. Originally published in JMIR Mhealth and Uhealth (http://mhealth.jmir.org), 06.10.2017.

  13. 22 CFR 121.8 - End-items, components, accessories, attachments, parts, firmware, software and systems.

    Science.gov (United States)

    2010-04-01

    ... an assembled article ready for its intended use. Only ammunition, fuel or another energy source is...-item without which the end-item is inoperable. (Example: Airframes, tail sections, transmissions, tank..., operating systems and support software for design, implementation, test, operation, diagnosis and repair. A...

  14. Digital dental photography. Part 2: Purposes and uses.

    Science.gov (United States)

    Ahmad, I

    2009-05-09

    Although the primary purpose of using digital photography in dentistry is for recording various aspects of clinical information in the oral cavity, other benefits also accrue. Detailed here are the uses of digital images for dento-legal documentation, education, communication with patients, dental team members and colleagues and for portfolios, and marketing. These uses enhance the status of a dental practice and improve delivery of care to patients.

  15. The Development of Arabic Digit Knowledge in 4- to 7-Year-Old Children

    Directory of Open Access Journals (Sweden)

    Birgit Knudsen

    2015-10-01

    Full Text Available Recent studies indicate that Arabic digit knowledge rather than non-symbolic number knowledge is a key foundation for arithmetic proficiency at the start of a child’s mathematical career. We document the developmental trajectory of 4- to 7-year-olds’ proficiency in accessing magnitude information from Arabic digits in five tasks differing in magnitude manipulation requirements. Results showed that children from 5 years onwards accessed magnitude information implicitly and explicitly, but that 5-year-olds failed to access magnitude information explicitly when numerical magnitude was contrasted with physical magnitude. Performance across tasks revealed a clear developmental trajectory: children traverse from first knowing the cardinal values of number words to recognizing Arabic digits to knowing their cardinal values and, concurrently, their ordinal position. Correlational analyses showed a strong within-child consistency, demonstrating that this pattern is not only reflected in group differences but also in individual performance.

  16. 7.9 pJ/Step Energy-Efficient Multi-Slope 13-bit Capacitance-to-Digital Converter

    KAUST Repository

    Omran, Hesham

    2014-08-01

    In this brief, an energy-efficient capacitance-to-digital converter (CDC) is presented. The proposed CDC uses digitally controlled coarse-fine multi-slope integration to digitize a wide range of capacitance in short conversion time. Both integration current and frequency are scaled, which leads to significant improvement in the energy efficiency of both analog and digital circuitry. Mathematical analysis for circuit nonidealities, noise, and improvement in energy efficiency is provided. A prototype fabricated in a 0.35-μm CMOS process occupies 0.09 mm2 and consumes a total of 153 μA from 3.3 V supply while achieving 13-bit resolution. The operation of the prototype is experimentally verified using MEMS capacitive pressure sensor. Compared to recently published work, the prototype achieves an excellent energy efficiency of 7.9 pJ/Step. © 2004-2012 IEEE.

  17. 7.9 pJ/Step Energy-Efficient Multi-Slope 13-bit Capacitance-to-Digital Converter

    KAUST Repository

    Omran, Hesham; Arsalan, Muhammad; Salama, Khaled N.

    2014-01-01

    In this brief, an energy-efficient capacitance-to-digital converter (CDC) is presented. The proposed CDC uses digitally controlled coarse-fine multi-slope integration to digitize a wide range of capacitance in short conversion time. Both integration current and frequency are scaled, which leads to significant improvement in the energy efficiency of both analog and digital circuitry. Mathematical analysis for circuit nonidealities, noise, and improvement in energy efficiency is provided. A prototype fabricated in a 0.35-μm CMOS process occupies 0.09 mm2 and consumes a total of 153 μA from 3.3 V supply while achieving 13-bit resolution. The operation of the prototype is experimentally verified using MEMS capacitive pressure sensor. Compared to recently published work, the prototype achieves an excellent energy efficiency of 7.9 pJ/Step. © 2004-2012 IEEE.

  18. Assembly-line health check up in digitalized hospital.

    Science.gov (United States)

    Liu, Yalan; Yao, Bin; Zhang, Zigang

    2002-01-01

    The health check up flow of digital hospital can be consulted with the assembly line of industry factory. Because they have the following same features: highly specialized workstation, closeness and continuance, rhythm, balanced production, continuous production. The essential prerequisites are as the follows: The inspecting items and methods should be stable; advanced product mix and stable production design; standardized raw material, consumption, procedure, inspection method; there are lots of request for health inspection; the customers move at the least unit; the space arrangement should be reasonable; the time arrangement should be proportion. With the computer net, the digital inspection can achieves the raw material controlling accurately. The basis of check up line concerns about equipment, net and software, data collection, and personnel. The group technology is used in the health inspection flow design of the digital hospital in the field of items customers and zone redivided. The digital assembly linemic health inspect has the following stages: member registering, notice, check in, arrange order, time control, report, feedback and analysis. The assembly linemic has following advantages: increasing the productivity, the space utility, satisfaction of customer, fund returning, lowering the cost and ensuring the quality.

  19. Spare Items validation

    International Nuclear Information System (INIS)

    Fernandez Carratala, L.

    1998-01-01

    There is an increasing difficulty for purchasing safety related spare items, with certifications by manufacturers for maintaining the original qualifications of the equipment of destination. The main reasons are, on the top of the logical evolution of technology, applied to the new manufactured components, the quitting of nuclear specific production lines and the evolution of manufacturers quality systems, originally based on nuclear codes and standards, to conventional industry standards. To face this problem, for many years different Dedication processes have been implemented to verify whether a commercial grade element is acceptable to be used in safety related applications. In the same way, due to our particular position regarding the spare part supplies, mainly from markets others than the american, C.N. Trillo has developed a methodology called Spare Items Validation. This methodology, which is originally based on dedication processes, is not a single process but a group of coordinated processes involving engineering, quality and management activities. These are to be performed on the spare item itself, its design control, its fabrication and its supply for allowing its use in destinations with specific requirements. The scope of application is not only focussed on safety related items, but also to complex design, high cost or plant reliability related components. The implementation in C.N. Trillo has been mainly curried out by merging, modifying and making the most of processes and activities which were already being performed in the company. (Author)

  20. Does remembering emotional items impair recall of same-emotion items?

    Science.gov (United States)

    Sison, Jo Ann G; Mather, Mara

    2007-04-01

    In the part-set cuing effect, cuing a subset of previously studied items impairs recall of the remaining noncued items. This experiment reveals that cuing participants with previously-studied emotional pictures (e.g., fear-evoking pictures of people) can impair recall of pictures involving the same emotion but different content (e.g., fear-evoking pictures of animals). This indicates that new events can be organized in memory using emotion as a grouping function to create associations. However, whether new information is organized in memory along emotional or nonemotional lines appears to be a flexible process that depends on people's current focus. Mentioning in the instructions that the pictures were either amusement- or fear-related led to memory impairment for pictures with the same emotion as cued pictures, whereas mentioning that the pictures depicted either animals or people led to memory impairment for pictures with the same type of actor.

  1. Item validity vs. item discrimination index: a redundancy?

    Science.gov (United States)

    Panjaitan, R. L.; Irawati, R.; Sujana, A.; Hanifah, N.; Djuanda, D.

    2018-03-01

    In several literatures about evaluation and test analysis, it is common to find that there are calculations of item validity as well as item discrimination index (D) with different formula for each. Meanwhile, other resources said that item discrimination index could be obtained by calculating the correlation between the testee’s score in a particular item and the testee’s score on the overall test, which is actually the same concept as item validity. Some research reports, especially undergraduate theses tend to include both item validity and item discrimination index in the instrument analysis. It seems that these concepts might overlap for both reflect the test quality on measuring the examinees’ ability. In this paper, examples of some results of data processing on item validity and item discrimination index were compared. It would be discussed whether item validity and item discrimination index can be represented by one of them only or it should be better to present both calculations for simple test analysis, especially in undergraduate theses where test analyses were included.

  2. Digital Reading Disposition Scale: A Study of Validity and Reliability

    Science.gov (United States)

    Bulut, Berker; Karasakaloglu, Nuri

    2018-01-01

    In this study, "a Digital Reading Disposition Scale" was developed to determine undergraduate pre-service teacher students' dispositions towards digital reading, opposed to a preference for printed reading material. Initially, a 20-items trial version of the scale was administered to a total sample of N = 301 undergraduate pre-service…

  3. Procurement Engineering Process for Commercial Grade Item Dedication

    International Nuclear Information System (INIS)

    Park, Jong-Hyuck; Park, Jong-Eun; Kwak, Tack-Hun; Yoo, Keun-Bae; Lee, Sang-Guk; Hong, Sung-Yull

    2006-01-01

    Procurement Engineering Process for commercial grade item dedication plays an increasingly important role in operation management of Korea Nuclear Power Plants. The purpose of the Procurement Engineering Process is the provision and assurance of a high quality and quantity of spare, replacement, retrofit and new parts and equipment while maximizing plant availability, minimizing downtime due to parts unavailability and providing reasonable overall program and inventory cost. In this paper, we will review the overview requirements, responsibilities and the process for demonstrating with reasonable assurance that a procured item for potential nuclear safety related services or other essential plant service is adequate with reasonable assurance for its application. This paper does not cover the details of technical evaluation, selecting critical characteristics, selecting acceptance methods, performing failure modes and effects analysis, performing source surveillance, performing quality surveys, performing special tests and inspections, and the other aspects of effective Procurement Engineering and Commercial Grade Item Dedication. The main contribution of this paper is to provide the provision of an overview of Procurement Engineering Process for commercial grade item

  4. 48 CFR 46.202-1 - Contracts for commercial items.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Contracts for commercial... CONTRACT MANAGEMENT QUALITY ASSURANCE Contract Quality Requirements 46.202-1 Contracts for commercial items. When acquiring commercial items (see part 12), the Government shall rely on contractors' existing...

  5. Design mobile satellite system architecture as an integral part of the cellular access digital network

    Science.gov (United States)

    Chien, E. S. K.; Marinho, J. A.; Russell, J. E., Sr.

    1988-01-01

    The Cellular Access Digital Network (CADN) is the access vehicle through which cellular technology is brought into the mainstream of the evolving integrated telecommunications network. Beyond the integrated end-to-end digital access and per call network services provisioning of the Integrated Services Digital Network (ISDN), the CADN engenders the added capability of mobility freedom via wireless access. One key element of the CADN network architecture is the standard user to network interface that is independent of RF transmission technology. Since the Mobile Satellite System (MSS) is envisioned to not only complement but also enhance the capabilities of the terrestrial cellular telecommunications network, compatibility and interoperability between terrestrial cellular and mobile satellite systems are vitally important to provide an integrated moving telecommunications network of the future. From a network standpoint, there exist very strong commonalities between the terrestrial cellular system and the mobile satellite system. Therefore, the MSS architecture should be designed as an integral part of the CADN. This paper describes the concept of the CADN, the functional architecture of the MSS, and the user-network interface signaling protocols.

  6. Conjunctive and Disjunctive Item Response Functions.

    Science.gov (United States)

    1984-10-01

    fed set ofvaluesof a, b, AI , B1 A2 2 . 2 A3 , and 13 , the f ’. g ’a. nd h’a in (7) are fied. Equation (7) must still hold for S - e19029e3,..* . Thus...for Item I Is -- b ?(a:1 , b1 ,O) (1 + ’)(I + e4 (22 where a and pi are arbitrary constants. These constants mst be the sam for all Items In a given...NETHERLIS I E3I1 Focility-Acquisitions 4133 Rugby Avnue 1 Lee Cronbach Bethesda, NO 20014 16 Laburnue Road Atherton, CA 94205 1 Dr. Benjamin A. Fairbank

  7. 77 FR 59339 - Acquisition of Commercial Items

    Science.gov (United States)

    2012-09-27

    ... DEPARTMENT OF DEFENSE Defense Acquisition Regulations System 48 CFR Part 212 Acquisition of Commercial Items CFR Correction 212.504 [Corrected] In Title 48 of the Code of Federal Regulations, Chapter 2 (Parts 201--299), revised as of October 1, 2011, on page 73, in section 212.504, paragraph (a) is...

  8. Digital radiography

    International Nuclear Information System (INIS)

    Brody, W.R.

    1984-01-01

    Digital Radiography begins with an orderly introduction to the fundamental concepts of digital imaging. The entire X-ray digital imagining system is described, from an overall characterization of image quality to specific components required for a digital radiographic system. Because subtraction is central to digital radiographic systems, the author details the use of various subtraction methods for image enhancement. Complex concepts are illustrated with numerous examples and presented in terms that can readily be understood by physicians without an advanced mathematics background. The second part of the book discusses implementations and applications of digital imagining systems based on area and scanned detector technologies. This section includes thorough coverage of digital fluoroscopy, scanned projection radiography, and film-based digital imaging systems, and features a state-of-the-art synopsis of the applications of digital subtraction angiography. The book concludes with a timely assessment of anticipated technological advances

  9. Suitability review of FMEA and reliability analysis for digital plant protection system and digital engineered safety features actuation system

    Energy Technology Data Exchange (ETDEWEB)

    Kim, I. S.; Kim, T. K.; Kim, M. C.; Kim, B. S.; Hwang, S. W.; Ryu, K. C. [Hanyang Univ., Seoul (Korea, Republic of)

    2000-11-15

    Of the many items that should be checked out during a review stage of the licensing application for the I and C system of Ulchin 5 and 6 units, this report relates to a suitability review of the reliability analysis of Digital Plant Protection System (DPPS) and Digital Engineered Safety Features Actuation System (DESFAS). In the reliability analysis performed by the system designer, ABB-CE, fault tree analysis was used as the main methods along with Failure Modes and Effect Analysis (FMEA). However, the present regulatory technique dose not allow the system reliability analysis and its results to be appropriately evaluated. Hence, this study was carried out focusing on the following four items ; development of general review items by which to check the validity of a reliability analysis, and the subsequent review of suitability of the reliability analysis for Ulchin 5 and 6 DPPS and DESFAS L development of detailed review items by which to check the validity of an FMEA, and the subsequent review of suitability of the FMEA for Ulchin 5 and 6 DPPS and DESFAS ; development of detailed review items by which to check the validity of a fault tree analysis, and the subsequent review of suitability of the fault tree for Ulchin 5 and 6 DPPS and DESFAS ; an integrated review of the safety and reliability of the Ulchin 5 and 6 DPPS and DESFAS based on the results of the various reviews above and also of a reliability comparison between the digital systems and the comparable analog systems, i.e., and analog Plant Protection System (PPS) and and analog Engineered Safety Features Actuation System (ESFAS). According to the review mentioned above, the reliability analysis of Ulchin 5 and 6 DPPS and DESFAS generally satisfies the review requirements. However, some shortcomings of the analysis were identified in our review such that the assumed test periods for several equipment were not properly incorporated in the analysis, and failures of some equipment were not included in the

  10. Calibrating the Medical Council of Canada's Qualifying Examination Part I using an integrated item response theory framework: a comparison of models and designs.

    Science.gov (United States)

    De Champlain, Andre F; Boulais, Andre-Philippe; Dallas, Andrew

    2016-01-01

    The aim of this research was to compare different methods of calibrating multiple choice question (MCQ) and clinical decision making (CDM) components for the Medical Council of Canada's Qualifying Examination Part I (MCCQEI) based on item response theory. Our data consisted of test results from 8,213 first time applicants to MCCQEI in spring and fall 2010 and 2011 test administrations. The data set contained several thousand multiple choice items and several hundred CDM cases. Four dichotomous calibrations were run using BILOG-MG 3.0. All 3 mixed item format (dichotomous MCQ responses and polytomous CDM case scores) calibrations were conducted using PARSCALE 4. The 2-PL model had identical numbers of items with chi-square values at or below a Type I error rate of 0.01 (83/3,499 or 0.02). In all 3 polytomous models, whether the MCQs were either anchored or concurrently run with the CDM cases, results suggest very poor fit. All IRT abilities estimated from dichotomous calibration designs correlated very highly with each other. IRT-based pass-fail rates were extremely similar, not only across calibration designs and methods, but also with regard to the actual reported decision to candidates. The largest difference noted in pass rates was 4.78%, which occurred between the mixed format concurrent 2-PL graded response model (pass rate= 80.43%) and the dichotomous anchored 1-PL calibrations (pass rate= 85.21%). Simpler calibration designs with dichotomized items should be implemented. The dichotomous calibrations provided better fit of the item response matrix than more complex, polytomous calibrations.

  11. Treatment of multi-word lexical items in the dictionary: the current situation and the potential problems facing dictionary users

    Directory of Open Access Journals (Sweden)

    Marjeta Vrbinc

    2011-05-01

    Full Text Available In this article, we first discuss the inclusion of idioms in the latest printed editions of monolingual learner’s dictionaries; we then consider and evaluate the success of look-up operations in connection with the recognition of the correct part of speech. The central part of the article discusses and justifies the macro- and microstructural treatment of multi-word lexical items. Finally, we address the issue of including idioms in the microstructure as special senses of the lemma, as usage examples and/or in the idioms section. The inclusion and treatment of multi-word lexical items depends on the needs of potential dictionary users. Lexicographers should therefore strive to adopt a pragmatic approach that would help the user to locate a multi-word lexical item with minimal effort. When compiling a bilingual dictionary, contrastive differences between source and target languages should also be taken into consideration. http://dx.doi.org/10.5128/ERYa7.15

  12. Digital signal processing

    CERN Document Server

    O'Shea, Peter; Hussain, Zahir M

    2011-01-01

    In three parts, this book contributes to the advancement of engineering education and that serves as a general reference on digital signal processing. Part I presents the basics of analog and digital signals and systems in the time and frequency domain. It covers the core topics: convolution, transforms, filters, and random signal analysis. It also treats important applications including signal detection in noise, radar range estimation for airborne targets, binary communication systems, channel estimation, banking and financial applications, and audio effects production. Part II considers sel

  13. The First Digit 1

    Indian Academy of Sciences (India)

    IAS Admin

    1075. RESONANCE | December 2013. GENERAL | ARTICLE. Table 2. The first digits distri- bution according to Benford's law. First Frequency. Digit. 1. 30.1 %. 2. 17.6 %. 3. 12.4 %. 4. 9.7 %. 5. 7.9 %. 6. 6.7 %. 7. 5.8 %. 8. 5.1 %. 9. 4.5 % ...

  14. Digital subtraction angiography

    International Nuclear Information System (INIS)

    Neuwirth, J. Jr.; Bohutova, J.

    1987-01-01

    The quality of radiodiagnostic methods to a great extent depends on the quality of the resulting image. The basic technical principles are summed up of the different parts of digital subtraction angiography apparatus and of methods of improving the image. The instrument is based on a videochain consisting of an X-ray tube, an intensifier of the radiographic image, optical parts, a video camera, an analog-to-digital converter and a computer. The main advantage of the digitally processed image is the possibility of optimizing the image into a form which will contain the biggest amount of diagnostically valuable information. Described are the mathematical operations for improving the digital image: spatial filtration, pixel shift, time filtration, image integration, time interval differentation and matched filtering. (M.D.). 8 refs., 3 figs

  15. Item response theory analysis of the Pain Self-Efficacy Questionnaire.

    Science.gov (United States)

    Costa, Daniel S J; Asghari, Ali; Nicholas, Michael K

    2017-01-01

    The Pain Self-Efficacy Questionnaire (PSEQ) is a 10-item instrument designed to assess the extent to which a person in pain believes s/he is able to accomplish various activities despite their pain. There is strong evidence for the validity and reliability of both the full-length PSEQ and a 2-item version. The purpose of this study is to further examine the properties of the PSEQ using an item response theory (IRT) approach. We used the two-parameter graded response model to examine the category probability curves, and location and discrimination parameters of the 10 PSEQ items. In item response theory, responses to a set of items are assumed to be probabilistically determined by a latent (unobserved) variable. In the graded-response model specifically, item response threshold (the value of the latent variable for which adjacent response categories are equally likely) and discrimination parameters are estimated for each item. Participants were 1511 mixed, chronic pain patients attending for initial assessment at a tertiary pain management centre. All items except item 7 ('I can cope with my pain without medication') performed well in IRT analysis, and the category probability curves suggested that participants used the 7-point response scale consistently. Items 6 ('I can still do many of the things I enjoy doing, such as hobbies or leisure activity, despite pain'), 8 ('I can still accomplish most of my goals in life, despite the pain') and 9 ('I can live a normal lifestyle, despite the pain') captured higher levels of the latent variable with greater precision. The results from this IRT analysis add to the body of evidence based on classical test theory illustrating the strong psychometric properties of the PSEQ. Despite the relatively poor performance of Item 7, its clinical utility warrants its retention in the questionnaire. The strong psychometric properties of the PSEQ support its use as an effective tool for assessing self-efficacy in people with pain

  16. 7 CFR 1728.50 - Removal of an item from listing or technical acceptance.

    Science.gov (United States)

    2010-01-01

    ... equipment will be notified in writing of a proposal to remove such item from the listing or technical... unanimous, the item will be referred to Technical Standards Committee “B.” Written notice of Technical...” decision, a sponsor may appeal in writing to Technical Standards Committee “B” to review Committee “A's...

  17. Using automatic item generation to create multiple-choice test items.

    Science.gov (United States)

    Gierl, Mark J; Lai, Hollis; Turner, Simon R

    2012-08-01

    Many tests of medical knowledge, from the undergraduate level to the level of certification and licensure, contain multiple-choice items. Although these are efficient in measuring examinees' knowledge and skills across diverse content areas, multiple-choice items are time-consuming and expensive to create. Changes in student assessment brought about by new forms of computer-based testing have created the demand for large numbers of multiple-choice items. Our current approaches to item development cannot meet this demand. We present a methodology for developing multiple-choice items based on automatic item generation (AIG) concepts and procedures. We describe a three-stage approach to AIG and we illustrate this approach by generating multiple-choice items for a medical licensure test in the content area of surgery. To generate multiple-choice items, our method requires a three-stage process. Firstly, a cognitive model is created by content specialists. Secondly, item models are developed using the content from the cognitive model. Thirdly, items are generated from the item models using computer software. Using this methodology, we generated 1248 multiple-choice items from one item model. Automatic item generation is a process that involves using models to generate items using computer technology. With our method, content specialists identify and structure the content for the test items, and computer technology systematically combines the content to generate new test items. By combining these outcomes, items can be generated automatically. © Blackwell Publishing Ltd 2012.

  18. 16 CFR Appendix G7 to Part 305 - Boilers-Oil

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Boilers-Oil G7 Appendix G7 to Part 305 Commercial Practices FEDERAL TRADE COMMISSION REGULATIONS UNDER SPECIFIC ACTS OF CONGRESS RULE CONCERNING... Part 305—Boilers—Oil Manufacturer's rated heating capacities (Btu's/hr.) Range of annual fuel...

  19. 2 CFR Appendix B to Part 225 - Selected Items of Cost

    Science.gov (United States)

    2010-01-01

    ... PRINCIPLES FOR STATE, LOCAL, AND INDIAN TRIBAL GOVERNMENTS (OMB CIRCULAR A-87) Pt. 225, App. B Appendix B to.... Royalties and other costs for the use of patents 39. Selling and marketing 40. Taxes 41. Termination costs... principles to be applied in establishing the allowability or unallowability of certain items of cost. These...

  20. User Decisions in a (Partly) Digital World

    DEFF Research Database (Denmark)

    Veitch, Rob; Constantiou, Ioanna

    2012-01-01

    of behaviour, resources and legal availability. We test the model for film and music using causal data of access-mode decisions collected from students at two Danish universities. Our findings indicate that the economic considerations of price perception and legal availability are the most consistent factors......Technologies enabling digital piracy have expanded the variety of options available to users when deciding how to access a product. As a result, access-mode decisions for film and music are broader than for other goods where the piracy option is not as prevalent. This paper presents a model...... of access-mode decisions for film and music which integrates elements of previous digital piracy models and expands upon them to reflect the decision’s complexity. We depict the access-mode decision as being influenced by the user’s product desire, price perceptions, perceived risks, internal regulators...

  1. High-speed and high-resolution analog-to-digital and digital-to-analog converters

    NARCIS (Netherlands)

    van de Plassche, R.J.

    1989-01-01

    Analog-to-digital and digital-to-analog converters are important building blocks connecting the analog world of transducers with the digital world of computing, signal processing and data acquisition systems. In chapter two the converter as part of a system is described. Requirements of analog

  2. Automated Item Generation with Recurrent Neural Networks.

    Science.gov (United States)

    von Davier, Matthias

    2018-03-12

    Utilizing technology for automated item generation is not a new idea. However, test items used in commercial testing programs or in research are still predominantly written by humans, in most cases by content experts or professional item writers. Human experts are a limited resource and testing agencies incur high costs in the process of continuous renewal of item banks to sustain testing programs. Using algorithms instead holds the promise of providing unlimited resources for this crucial part of assessment development. The approach presented here deviates in several ways from previous attempts to solve this problem. In the past, automatic item generation relied either on generating clones of narrowly defined item types such as those found in language free intelligence tests (e.g., Raven's progressive matrices) or on an extensive analysis of task components and derivation of schemata to produce items with pre-specified variability that are hoped to have predictable levels of difficulty. It is somewhat unlikely that researchers utilizing these previous approaches would look at the proposed approach with favor; however, recent applications of machine learning show success in solving tasks that seemed impossible for machines not too long ago. The proposed approach uses deep learning to implement probabilistic language models, not unlike what Google brain and Amazon Alexa use for language processing and generation.

  3. Digital Natives: Creating Emergent Exhibitions through Digital Technologies

    DEFF Research Database (Denmark)

    Smith, Rachel Charlotte; Iversen, Ole Sejer; Dindler, Christian

    2011-01-01

    . In this way, digital technology can contribute to the creation of emergent exhibitions in which the exhibition is created in dialogue between audiences and the museum. We present experiences from a current research project, the Digital Natives exhibition, in which digital technology was designed......Digital Technology can support the creation of dialogical spaces in the museum, both playful and reflective, that allow audiences to engage in the ongoing construction and reproduction of cultural heritage creating novel connections between self and others and between past, present and future...... as an integral part of the exhibition to encourage dialogue between audiences and the exhibition materials and thereby investigate how the exhibition emerge as a result of this dialogic co-construction inside the exhibition space. In short, the opportunities offered by digital technologies prompts us to consider...

  4. The impact of digital imaging on patient doses during barium studies

    International Nuclear Information System (INIS)

    Broadhead, D.A.; Chapple, C.-L.; Faulkner, K.

    1995-01-01

    Barium studies performed on 10 digital and four non-digital fluoroscopic systems were monitored with dose-area product meters as part of a Regional Patient Dosimetry Audit programme. The data have been collected using a computer to read and reset the dose-area product meter and also to collect patient and examination details. A comparison of dose-area product measurements from digital and non-digital fluoroscopy units on over 10 000 barium studies is presented. The data have been corrected according to patient size. The mean size corrected dose-area product for a barium meal examination was found to be 7.62 Gy cm -2 for a digital set compared with 15.45 Gy cm -2 for a non-digital set with 2462 and 1308 patients included in each measurement series, respectively. Dose-area products were also a factor of approximately two lower for barium enema, barium swallow and barium follow-through examinations performed on digital systems. (author)

  5. Questioning short-term memory and its measurement: Why digit span measures long-term associative learning.

    Science.gov (United States)

    Jones, Gary; Macken, Bill

    2015-11-01

    Traditional accounts of verbal short-term memory explain differences in performance for different types of verbal material by reference to inherent characteristics of the verbal items making up memory sequences. The role of previous experience with sequences of different types is ostensibly controlled for either by deliberate exclusion or by presenting multiple trials constructed from different random permutations. We cast doubt on this general approach in a detailed analysis of the basis for the robust finding that short-term memory for digit sequences is superior to that for other sequences of verbal material. Specifically, we show across four experiments that this advantage is not due to inherent characteristics of digits as verbal items, nor are individual digits within sequences better remembered than other types of individual verbal items. Rather, the advantage for digit sequences stems from the increased frequency, compared to other verbal material, with which digits appear in random sequences in natural language, and furthermore, relatively frequent digit sequences support better short-term serial recall than less frequent ones. We also provide corpus-based computational support for the argument that performance in a short-term memory setting is a function of basic associative learning processes operating on the linguistic experience of the rememberer. The experimental and computational results raise questions not only about the role played by measurement of digit span in cognition generally, but also about the way in which long-term memory processes impact on short-term memory functioning. Copyright © 2015 The Authors. Published by Elsevier B.V. All rights reserved.

  6. Digital reactor period meter type of NSSG-7

    Energy Technology Data Exchange (ETDEWEB)

    Glowacki, S W

    1981-01-01

    The paper presents the idea and electronic circuits of the Digital Reactor Period Meter. The instrument consists of a neutron ionisation chamber, the amplifier logarithming the output chamber current, the circuit taking two samples of the log amplifier output signal and subtracting them, the analog -to -digital dividing circuit and the scaler providing the final information of the reactor period value in seconds and in the digital form. Besides it, the instrument produces the acoustic signal in the case, when the rise-time of neutron flux exceeds the permitted value. The untypical construction of the reactor period meter has been developed to obtain both good measurement accuracy and the resistance against the electromagnetic background pulses interfering with the measuring process. The applied measuring system has been patented.

  7. The Role of Item Models in Automatic Item Generation

    Science.gov (United States)

    Gierl, Mark J.; Lai, Hollis

    2012-01-01

    Automatic item generation represents a relatively new but rapidly evolving research area where cognitive and psychometric theories are used to produce tests that include items generated using computer technology. Automatic item generation requires two steps. First, test development specialists create item models, which are comparable to templates…

  8. Association of a full-day vs part-day preschool intervention with school readiness, attendance, and parent involvement.

    Science.gov (United States)

    Reynolds, Arthur J; Richardson, Brandt A; Hayakawa, Momoko; Lease, Erin M; Warner-Richter, Mallory; Englund, Michelle M; Ou, Suh-Ruu; Sullivan, Molly

    2014-11-26

    Early childhood interventions have demonstrated positive effects on well-being. Whether full-day vs part-day attendance improves outcomes is unknown. To evaluate the association between a full- vs part-day early childhood program and school readiness, attendance, and parent involvement. End-of-preschool follow-up of a nonrandomized, matched-group cohort of predominantly low-income, ethnic minority children enrolled in the Child-Parent Centers (CPC) for the full day (7 hours; n = 409) or part day (3 hours on average; n = 573) in the 2012-2013 school year in 11 schools in Chicago, Illinois. The Midwest CPC Education Program provides comprehensive instruction, family-support, and health services from preschool to third grade. School readiness skills at the end of preschool, attendance and chronic absences, and parental involvement. The readiness domains in the Teaching Strategies GOLD Assessment System include a total of 49 items with a score range of 105-418. The specific domains are socioemotional with 9 items (score range, 20-81), language with 6 items (score range, 15-54), literacy with 12 items (score range, 9-104), math with 7 items (score, 8-60), physical health with 5 items (score range, 14-45), and cognitive development with 10 items (score range, 18-90). Full-day preschool participants had higher scores than part-day peers on socioemotional development (58.6 vs 54.5; difference, 4.1; 95% CI, 0.5-7.6; P = .03), language (39.9 vs 37.3; difference, 2.6; 95% CI, 0.6-4.6; P = .01), math (40.0 vs 36.4; difference, 3.6; 95% CI, 0.5-6.7; P = .02), physical health (35.5 vs 33.6; difference, 1.9; 95% CI, 0.5-3.2; P = .006), and the total score (298.1 vs 278.2; difference, 19.9; 95% CI, 1.2-38.4; P = .04). Literacy (64.5 vs 58.6; difference, 5.9; 95% CI, -0.07 to 12.4; P = .08) and cognitive development (59.7 vs 57.7; difference, 2.0; 95% CI, -2.4 to 6.3; P = .38) were not significant. Full-day preschool graduates also had higher

  9. 39 CFR 3001.7 - Ex parte communications.

    Science.gov (United States)

    2010-07-01

    ... Applicability § 3001.7 Ex parte communications. (a) Definitions—(1) Decision-making Commission personnel... persons are designated “decision-making Commission personnel”: (i) The Commissioners and their personal... involved in the decisional process. (2) Non-decision-making Commission personnel. The following categories...

  10. Assessing item fit for unidimensional item response theory models using residuals from estimated item response functions.

    Science.gov (United States)

    Haberman, Shelby J; Sinharay, Sandip; Chon, Kyong Hee

    2013-07-01

    Residual analysis (e.g. Hambleton & Swaminathan, Item response theory: principles and applications, Kluwer Academic, Boston, 1985; Hambleton, Swaminathan, & Rogers, Fundamentals of item response theory, Sage, Newbury Park, 1991) is a popular method to assess fit of item response theory (IRT) models. We suggest a form of residual analysis that may be applied to assess item fit for unidimensional IRT models. The residual analysis consists of a comparison of the maximum-likelihood estimate of the item characteristic curve with an alternative ratio estimate of the item characteristic curve. The large sample distribution of the residual is proved to be standardized normal when the IRT model fits the data. We compare the performance of our suggested residual to the standardized residual of Hambleton et al. (Fundamentals of item response theory, Sage, Newbury Park, 1991) in a detailed simulation study. We then calculate our suggested residuals using data from an operational test. The residuals appear to be useful in assessing the item fit for unidimensional IRT models.

  11. Problems with the factor analysis of items: Solutions based on item response theory and item parcelling

    Directory of Open Access Journals (Sweden)

    Gideon P. De Bruin

    2004-10-01

    Full Text Available The factor analysis of items often produces spurious results in the sense that unidimensional scales appear multidimensional. This may be ascribed to failure in meeting the assumptions of linearity and normality on which factor analysis is based. Item response theory is explicitly designed for the modelling of the non-linear relations between ordinal variables and provides a strong alternative to the factor analysis of items. Items may also be combined in parcels that are more likely to satisfy the assumptions of factor analysis than do the items. The use of the Rasch rating scale model and the factor analysis of parcels is illustrated with data obtained with the Locus of Control Inventory. The results of these analyses are compared with the results obtained through the factor analysis of items. It is shown that the Rasch rating scale model and the factoring of parcels produce superior results to the factor analysis of items. Recommendations for the analysis of scales are made. Opsomming Die faktorontleding van items lewer dikwels misleidende resultate op, veral in die opsig dat eendimensionele skale as meerdimensioneel voorkom. Hierdie resultate kan dikwels daaraan toegeskryf word dat daar nie aan die aannames van lineariteit en normaliteit waarop faktorontleding berus, voldoen word nie. Itemresponsteorie, wat eksplisiet vir die modellering van die nie-liniêre verbande tussen ordinale items ontwerp is, bied ’n aantreklike alternatief vir die faktorontleding van items. Items kan ook in pakkies gegroepeer word wat meer waarskynlik aan die aannames van faktorontleding voldoen as individuele items. Die gebruik van die Rasch beoordelingskaalmodel en die faktorontleding van pakkies word aan die hand van data wat met die Lokus van Beheervraelys verkry is, gedemonstreer. Die resultate van hierdie ontledings word vergelyk met die resultate wat deur ‘n faktorontleding van die individuele items verkry is. Die resultate dui daarop dat die Rasch

  12. A 256×256 low-light-level CMOS imaging sensor with digital CDS

    Science.gov (United States)

    Zou, Mei; Chen, Nan; Zhong, Shengyou; Li, Zhengfen; Zhang, Jicun; Yao, Li-bin

    2016-10-01

    In order to achieve high sensitivity for low-light-level CMOS image sensors (CIS), a capacitive transimpedance amplifier (CTIA) pixel circuit with a small integration capacitor is used. As the pixel and the column area are highly constrained, it is difficult to achieve analog correlated double sampling (CDS) to remove the noise for low-light-level CIS. So a digital CDS is adopted, which realizes the subtraction algorithm between the reset signal and pixel signal off-chip. The pixel reset noise and part of the column fixed-pattern noise (FPN) can be greatly reduced. A 256×256 CIS with CTIA array and digital CDS is implemented in the 0.35μm CMOS technology. The chip size is 7.7mm×6.75mm, and the pixel size is 15μm×15μm with a fill factor of 20.6%. The measured pixel noise is 24LSB with digital CDS in RMS value at dark condition, which shows 7.8× reduction compared to the image sensor without digital CDS. Running at 7fps, this low-light-level CIS can capture recognizable images with the illumination down to 0.1lux.

  13. 7 CFR 900.16 - Ex parte communications.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 8 2010-01-01 2010-01-01 false Ex parte communications. 900.16 Section 900.16 Agriculture Regulations of the Department of Agriculture (Continued) AGRICULTURAL MARKETING SERVICE (Marketing... Practice and Procedure Governing Proceedings To Formulate Marketing Agreements and Marketing Orders § 900...

  14. Calibrating the Medical Council of Canada’s Qualifying Examination Part I using an integrated item response theory framework: a comparison of models and designs

    Directory of Open Access Journals (Sweden)

    Andre F. De Champlain

    2016-01-01

    Full Text Available Purpose: The aim of this research was to compare different methods of calibrating multiple choice question (MCQ and clinical decision making (CDM components for the Medical Council of Canada’s Qualifying Examination Part I (MCCQEI based on item response theory. Methods: Our data consisted of test results from 8,213 first time applicants to MCCQEI in spring and fall 2010 and 2011 test administrations. The data set contained several thousand multiple choice items and several hundred CDM cases. Four dichotomous calibrations were run using BILOG-MG 3.0. All 3 mixed item format (dichotomous MCQ responses and polytomous CDM case scores calibrations were conducted using PARSCALE 4. Results: The 2-PL model had identical numbers of items with chi-square values at or below a Type I error rate of 0.01 (83/3,499 or 0.02. In all 3 polytomous models, whether the MCQs were either anchored or concurrently run with the CDM cases, results suggest very poor fit. All IRT abilities estimated from dichotomous calibration designs correlated very highly with each other. IRT-based pass-fail rates were extremely similar, not only across calibration designs and methods, but also with regard to the actual reported decision to candidates. The largest difference noted in pass rates was 4.78%, which occurred between the mixed format concurrent 2-PL graded response model (pass rate= 80.43% and the dichotomous anchored 1-PL calibrations (pass rate= 85.21%. Conclusion: Simpler calibration designs with dichotomized items should be implemented. The dichotomous calibrations provided better fit of the item response matrix than more complex, polytomous calibrations.

  15. Item information and discrimination functions for trinary PCM items

    NARCIS (Netherlands)

    Akkermans, Wies; Muraki, Eiji

    1997-01-01

    For trinary partial credit items the shape of the item information and the item discrimination function is examined in relation to the item parameters. In particular, it is shown that these functions are unimodal if δ2 – δ1 < 4 ln 2 and bimodal otherwise. The locations and values of the maxima are

  16. Digital Humanities

    DEFF Research Database (Denmark)

    Brügger, Niels

    2016-01-01

    , and preserving material to study, as an object of study in its own right, as an analytical tool, or for collaborating, and for disseminating results. The term "digital humanities" was coined around 2001, and gained currency within academia in the following years. However, computers had been used within......Digital humanities is an umbrella term for theories, methodologies, and practices related to humanities scholarship that use the digital computer as an integrated and essential part of its research and teaching activities. The computer can be used for establishing, finding, collecting...

  17. Examining Factors Predicting Students’ Digital Competence

    Directory of Open Access Journals (Sweden)

    Ove Edvard Hatlevik

    2015-02-01

    Full Text Available The purpose of this study was to examine factors predicting lower secondary school students’ digital competence and to explore differences between students when it comes to digital competence. Results from a digital competence test and survey in lower secondary school will be presented. It is important to learn more about and investigate what characterizes students’ digital competence. A sample of 852 ninth-grade Norwegian students from 38 schools participated in the study. The students answered a 26 item multiple-choice digital competence test and a self-report questionnaire about family background, motivation, and previous grades. Structural equation modeling was used to test a model of the hypothesised relationship between family background, mastery orientation, previous achievements, and digital competence. The results indicate variation in digital competence among the ninth-graders. Further, analyses showed that students’ conditions at home, i.e., language integration and cultural capital, together with mastery orientation and academic achievements predict students digital competence. This study indicates that that there is evidence of digital diversity between lower secondary students. It does not seem like the development of digital competence among the students happens automatically. Students’ family background and school performance are the most important factors. Therefore, as this study shows, it is necessary to further investigate how schools can identify students’ level of competence and to develop plans and actions for how schools can help to try to equalize differences.

  18. Assessment of Differential Item Functioning in the Experiences of Discrimination Index

    Science.gov (United States)

    Cunningham, Timothy J.; Berkman, Lisa F.; Gortmaker, Steven L.; Kiefe, Catarina I.; Jacobs, David R.; Seeman, Teresa E.; Kawachi, Ichiro

    2011-01-01

    The psychometric properties of instruments used to measure self-reported experiences of discrimination in epidemiologic studies are rarely assessed, especially regarding construct validity. The authors used 2000–2001 data from the Coronary Artery Risk Development in Young Adults (CARDIA) Study to examine differential item functioning (DIF) in 2 versions of the Experiences of Discrimination (EOD) Index, an index measuring self-reported experiences of racial/ethnic and gender discrimination. DIF may confound interpretation of subgroup differences. Large DIF was observed for 2 of 7 racial/ethnic discrimination items: White participants reported more racial/ethnic discrimination for the “at school” item, and black participants reported more racial/ethnic discrimination for the “getting housing” item. The large DIF by race/ethnicity in the index for racial/ethnic discrimination probably reflects item impact and is the result of valid group differences between blacks and whites regarding their respective experiences of discrimination. The authors also observed large DIF by race/ethnicity for 3 of 7 gender discrimination items. This is more likely to have been due to item bias. Users of the EOD Index must consider the advantages and disadvantages of DIF adjustment (omitting items, constructing separate measures, and retaining items). The EOD Index has substantial usefulness as an instrument that can assess self-reported experiences of discrimination. PMID:22038104

  19. An alternative method for noise analysis using pixel variance as part of quality control procedures on digital mammography systems.

    NARCIS (Netherlands)

    Bouwman, R.; Young, K.; Lazzari, B.; Ravaglia, V.; Broeders, M.J.M.; Engen, R. van

    2009-01-01

    According to the European Guidelines for quality assured breast cancer screening and diagnosis, noise analysis is one of the measurements that needs to be performed as part of quality control procedures on digital mammography systems. However, the method recommended in the European Guidelines does

  20. Item level diagnostics and model - data fit in item response theory ...

    African Journals Online (AJOL)

    Item response theory (IRT) is a framework for modeling and analyzing item response data. Item-level modeling gives IRT advantages over classical test theory. The fit of an item score pattern to an item response theory (IRT) models is a necessary condition that must be assessed for further use of item and models that best fit ...

  1. Randomized controlled within-subject evaluation of digital and conventional workflows for the fabrication of lithium disilicate single crowns. Part I: digital versus conventional unilateral impressions.

    Science.gov (United States)

    Benic, Goran I; Mühlemann, Sven; Fehmer, Vincent; Hämmerle, Christoph H F; Sailer, Irena

    2016-11-01

    Trials comparing the overall performance of fully digital and conventional workflows in reconstructive dentistry are needed. The purpose of the first part of this randomized controlled clinical trial was to determine whether optical impressions produce different results from conventional impressions with respect to time efficiency and patient and operator perceptions of the clinical workflow. Three digital impressions and 1 conventional impression were made in each of 10 participants according to a randomly generated sequence. The digital systems were Lava COS, iTero, and Cerec Bluecam. The conventional impression was made with the closed-mouth technique and polyvinyl siloxane material. The time needed for powdering, impressions, and interocclusal record was recorded. Patient and clinician perceptions of the procedures were rated by means of visual analog scales. The paired t test with Bonferroni correction was applied to detect differences (α=.05/6=.0083). The mean total working time ±standard deviation amounted to 260 ±66 seconds for the conventional impression, 493 ±193 seconds for Lava, 372 ±126 seconds for iTero, and 357 ±55 seconds for Cerec. The total working time for the conventional impression was significantly lower than that for Lava and Cerec. With regard to the working time without powdering, the differences between the methods were not statistically significant. The patient rating (very uncomfortable=0; comfortable=100) measured 61 ±34 for conventional impression, 71 ±18 for Lava, 66 ±20 for iTero, and 48 ±18 for Cerec. The differences were not statistically significant. The clinician rating (simple=0; very difficult=100) was 13 ±13 for the conventional impression, 54 ±27 for Lava, 22 ±11 for iTero, and 36 ±23 for Cerec. The differences between the conventional impression and Lava and between iTero and Lava were statistically significant. The conventional impression was more time-effective than the digital impressions. In terms of

  2. Digital all-sky polarization imaging of partly cloudy skies.

    Science.gov (United States)

    Pust, Nathan J; Shaw, Joseph A

    2008-12-01

    Clouds reduce the degree of linear polarization (DOLP) of skylight relative to that of a clear sky. Even thin subvisual clouds in the "twilight zone" between clouds and aerosols produce a drop in skylight DOLP long before clouds become visible in the sky. In contrast, the angle of polarization (AOP) of light scattered by a cloud in a partly cloudy sky remains the same as in the clear sky for most cases. In unique instances, though, select clouds display AOP signatures that are oriented 90 degrees from the clear-sky AOP. For these clouds, scattered light oriented parallel to the scattering plane dominates the perpendicularly polarized Rayleigh-scattered light between the instrument and the cloud. For liquid clouds, this effect may assist cloud particle size identification because it occurs only over a relatively limited range of particle radii that will scatter parallel polarized light. Images are shown from a digital all-sky-polarization imager to illustrate these effects. Images are also shown that provide validation of previously published theories for weak (approximately 2%) polarization parallel to the scattering plane for a 22 degrees halo.

  3. Digital temperature meter

    Energy Technology Data Exchange (ETDEWEB)

    Glowacki, S

    1982-01-01

    Digital temperature meter for precise temperature measurements is presented. Its parts such as thermostat, voltage-frequency converter and digital frequency meter are described. Its technical parameters such as temperature range 50degC-700degC, measurement precision 1degC, measurement error +-1degC are given. (A.S.).

  4. Partnering for Discoverability: Knitting Archival Finding Aids to Digitized Material Using a Low Tech Digital Content Linking Process

    Directory of Open Access Journals (Sweden)

    Liz Woolcott

    2016-10-01

    Full Text Available As libraries continue to ramp up digitization efforts for unique archival and special collections material, the segregation of archival finding aids from their digitized counterparts presents an accumulating discoverability problem for both patrons and library staff. For Utah State University (USU Libraries, it became evident that a system was necessary to connect both new and legacy finding aids with their digitized content to improve use and discoverability. Following a cross-departmental workflow analysis involving the Special Collections, Cataloging and Metadata, and Digital Initiatives departments, a process was created for semi-automating the batch linking of item and folder level entries in EAD finding aids to the corresponding digitized material in CONTENTdm. In addition to the obvious benefit of linking content, this cross-departmental process also allowed for the implementation of persistent identifiers and the enhancement of finding aids using the more robust metadata that accompanies digitized material. This article will provide a detailed overview of the process, as well as describe how the three departments at USU have worked together to identify key stakeholders, develop the procedures, and address future developments.

  5. Crime and Justice in Digital Society: Towards a ‘Digital Criminology’?

    Directory of Open Access Journals (Sweden)

    Greg Stratton

    2017-05-01

    Full Text Available The opportunities afforded through digital and communications technologies, in particular social media, have inspired a diverse range of interdisciplinary perspectives exploring how such advancements influence the way we live. Rather than positioning technology as existing in a separate space to society more broadly, the ‘digital society’ is a concept that recognises such technologies as an embedded part of the larger social entity and acknowledges the incorporation of digital technologies, media, and networks in our everyday lives (Lupton 2014, including in crime perpetration, victimisation and justice. In this article, we explore potential for an interdisciplinary concept of digital society to expand and inspire innovative crime and justice scholarship within an emerging field of ‘digital criminology’.

  6. Application of the Commercial Grade Item (CGI) Dedication Process for Procurement of Nuclear Safety Related Items at Nuclear Power Plant Krsko (NEK)

    International Nuclear Information System (INIS)

    Heruc, Z.; Pozar, J.

    1998-01-01

    CGI procurement is a process whereby parts are brought without imposing Appendix B Quality Assurance requirements on the supplier, and than dedicated for use in safety-related applications. The dedication process involves 1) based upon required safety function, an engineering evaluation to identify critical characteristic of the item and specification of acceptance criteria; and 2) quality control activities to ensure the item(s) supplied meets the acceptance criteria specified. CGI Dedication supports the supply of certified components/parts for the plant operation in an environment where the number of nuclear qualified suppliers diminishes. It requires a more active role of the plant personnel, therefore presenting an additional burden on human resources, but at the same time increases the technical KNOW-HOW and improves the confidence of test and inspection data presented in the certificates. Very often it is also cost beneficial. This paper is a continuation to last year presentation of the introduction of this method into NEK's procurement process and presents the current approach and some practical examples. (author)

  7. 7 CFR 3016.1 - Purpose and scope of this part.

    Science.gov (United States)

    2010-01-01

    ... AND LOCAL GOVERNMENTS General § 3016.1 Purpose and scope of this part. This part establishes uniform... 7 Agriculture 15 2010-01-01 2010-01-01 false Purpose and scope of this part. 3016.1 Section 3016.1 Agriculture Regulations of the Department of Agriculture (Continued) OFFICE OF THE CHIEF FINANCIAL OFFICER...

  8. Digital radiography

    International Nuclear Information System (INIS)

    Zani, M.L.

    2002-01-01

    X-ray radiography is a very common technique used to check the homogeneity of a material or the inside of a mechanical part. Generally the radiation that goes through the material to check, produced an image on a sensitized film. This method requires time because the film needs to be developed, digital radiography has no longer this inconvenient. In digital radiography the film is replaced by digital data and can be processed as any computer file. This new technique is promising but its main inconvenient is that today its resolution is not so good as that of film radiography. (A.C.)

  9. Overview of Classical Test Theory and Item Response Theory for Quantitative Assessment of Items in Developing Patient-Reported Outcome Measures

    Science.gov (United States)

    Cappelleri, Joseph C.; Lundy, J. Jason; Hays, Ron D.

    2014-01-01

    Introduction The U.S. Food and Drug Administration’s patient-reported outcome (PRO) guidance document defines content validity as “the extent to which the instrument measures the concept of interest” (FDA, 2009, p. 12). “Construct validity is now generally viewed as a unifying form of validity for psychological measurements, subsuming both content and criterion validity” (Strauss & Smith, 2009, p. 7). Hence both qualitative and quantitative information are essential in evaluating the validity of measures. Methods We review classical test theory and item response theory approaches to evaluating PRO measures including frequency of responses to each category of the items in a multi-item scale, the distribution of scale scores, floor and ceiling effects, the relationship between item response options and the total score, and the extent to which hypothesized “difficulty” (severity) order of items is represented by observed responses. Conclusion Classical test theory and item response theory can be useful in providing a quantitative assessment of items and scales during the content validity phase of patient-reported outcome measures. Depending on the particular type of measure and the specific circumstances, either one or both approaches should be considered to help maximize the content validity of PRO measures. PMID:24811753

  10. The cultural fairness of the 12-item General Health Questionnaire among diverse adolescents.

    Science.gov (United States)

    Bowe, Anica

    2017-01-01

    The 12-item general health questionnaire (GHQ-12) was used in the Longitudinal Study of Young People in England (LSYPE; N = 15,770) to collect measures on adolescent mental health. Given the debate in current literature regarding the dimensionality of the GHQ-12, this study examined the cultural sensitivity of the instrument at the item level for each of the 7 major ethnic groups within the database. This study used a hybrid approach of ordinal logistic regression and item response theory (IRT) to examine the presence of differential item functioning (DIF) on the questionnaire. Results demonstrated that uniform, nonuniform, and overall DIF were present on items between White and Asian adolescents (7 items), White and Black Caribbean adolescents (1 item), and White and Black African adolescents (7 items), however all McFadden's pseudo R² effect size estimates indicated that the DIF was negligible. Overall, there were cumulative small scale level effects for the Mixed/Biracial, Asian, and Black African groups, but in each case the bias was only marginal. Findings demonstrate that the GHQ-12 can be considered culturally sensitive for adolescents from diverse ethnic groups in England, but follow-up studies are necessary. Implications for future education and health policies as well as the use of IR-based approaches for psychological instruments are discussed. (PsycINFO Database Record (c) 2016 APA, all rights reserved).

  11. Digital Language Death

    Science.gov (United States)

    Kornai, András

    2013-01-01

    Of the approximately 7,000 languages spoken today, some 2,500 are generally considered endangered. Here we argue that this consensus figure vastly underestimates the danger of digital language death, in that less than 5% of all languages can still ascend to the digital realm. We present evidence of a massive die-off caused by the digital divide. PMID:24167559

  12. Digital language death.

    Directory of Open Access Journals (Sweden)

    András Kornai

    Full Text Available Of the approximately 7,000 languages spoken today, some 2,500 are generally considered endangered. Here we argue that this consensus figure vastly underestimates the danger of digital language death, in that less than 5% of all languages can still ascend to the digital realm. We present evidence of a massive die-off caused by the digital divide.

  13. Dual representation of item positions in verbal short-term memory: Evidence for two access modes.

    Science.gov (United States)

    Lange, Elke B; Verhaeghen, Paul; Cerella, John

    Memory sets of N = 1~5 digits were exposed sequentially from left-to-right across the screen, followed by N recognition probes. Probes had to be compared to memory list items on identity only (Sternberg task) or conditional on list position. Positions were probed randomly or in left-to-right order. Search functions related probe response times to set size. Random probing led to ramped, "Sternbergian" functions whose intercepts were elevated by the location requirement. Sequential probing led to flat search functions-fast responses unaffected by set size. These results suggested that items in STM could be accessed either by a slow search-on-identity followed by recovery of an associated location tag, or in a single step by following item-to-item links in study order. It is argued that this dual coding of location information occurs spontaneously at study, and that either code can be utilised at retrieval depending on test demands.

  14. Diverse Food Items Are Similarly Categorized by 8- to 13-Year-Old Children

    Science.gov (United States)

    Beltran, Alicia; Knight Sepulveda, Karina; Watson, Kathy; Baranowski, Tom; Baranowski, Janice; Islam, Noemi; Missaghian, Mariam

    2008-01-01

    Objective: Assess how 8- to 13-year-old children categorized and labeled food items for possible use as part of a food search strategy in a computerized 24-hour dietary recall. Design: A set of 62 cards with pictures and names of food items from 18 professionally defined food groups was sorted by each child into piles of similar food items.…

  15. Workshop 93. Part C

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-31

    Out of 94 short communications contained in the proceedings, 11 items were inputted to the INIS system. The topics covered include underground containment, in situ gamma scintillation spectroscopy, radionuclide methods in measuring fuel flow to boilers, microdosimetric studies of photon fields, training reactors, digital control of research reactors, nuclear reactor educational programmes, PIXE analysis, and transient analysis of steam turbines. (Z.S.).

  16. Workshop 93. Part C

    International Nuclear Information System (INIS)

    1995-01-01

    Out of 94 short communications contained in the proceedings, 11 items were inputted to the INIS system. The topics covered include underground containment, in situ gamma scintillation spectroscopy, radionuclide methods in measuring fuel flow to boilers, microdosimetric studies of photon fields, training reactors, digital control of research reactors, nuclear reactor educational programmes, PIXE analysis, and transient analysis of steam turbines. (Z.S.)

  17. 15 CFR Supplement No. 7 to Part 760 - Interpretation

    Science.gov (United States)

    2010-01-01

    ... TRADE PRACTICES OR BOYCOTTS Pt. 760, Supp. 7 Supplement No. 7 to Part 760—Interpretation Prohibited Refusal To Do Business When a boycotting country rejects for boycott-related reasons a shipment of goods... supplier and demand restitution). The U.S. person may then make a non-boycott based selection of another...

  18. Visualizing Forensic Data : Evidence Guidelines (Part 1

    Directory of Open Access Journals (Sweden)

    Damian Schofield

    2013-03-01

    Full Text Available Visualisation is becoming increasingly important for understanding information, such as investigative data (for example: computing, medical and crime scene evidence and analysis (for example: network capability assessment, data file reconstruction and planning scenarios. Investigative data visualisation is used to reconstruct a scene or item and is used to assist the viewer (who may well be a member of the general public with little or no understanding of the subject matter to understand what is being presented. Analysis visualisations, on the other hand, are usually developed to review data, information and assess competing scenario hypotheses for those who usually have an understanding of the subject matter. Visualisation represents information that has been digitally recorded (for example: pictures, video and sound, hand written and/or spoken data, to show what may have, could have, did happen or is believed to have happened. That is why visualising data is an important development in the analysis and investigation realms, as visualisation explores the accuracies, inconsistencies and discrepancies of the collected data and information. This paper presents introduces some of the various graphical techniques and technology used to display digital information in a courtroom. The advantages and disadvantages involved in the implementation of this technology are also discussed. This paper is part one of a two part series that aims to describe the use of, and provide guidelines for, the use of graphical displays in courtrooms.

  19. Digital Dimension Disruption: A National Security Enterprise Response

    Science.gov (United States)

    2017-12-21

    PRISM 7, NO. 2 FEATURES | 41 Digital Dimension Disruption A National Security Enterprise Response By Charles Rybeck, Lanny Cornwell, and Philip Sagan...1 The slow-motion collapse of parts of the 20th century’s legacy is now accelerating in ways that likely will usher in a monumental realignment of...societal institutions, methods of business, and fundamental ideas about national security. This realignment will , of necessity, change the frameworks

  20. Identification of metallic items that caused nickel dermatitis in Danish patients.

    Science.gov (United States)

    Thyssen, Jacob P; Menné, Torkil; Johansen, Jeanne D

    2010-09-01

    Nickel allergy is prevalent as assessed by epidemiological studies. In an attempt to further identify and characterize sources that may result in nickel allergy and dermatitis, we analysed items identified by nickel-allergic dermatitis patients as causative of nickel dermatitis by using the dimethylglyoxime (DMG) test. Dermatitis patients with nickel allergy of current relevance were identified over a 2-year period in a tertiary referral patch test centre. When possible, their work tools and personal items were examined with the DMG test. Among 95 nickel-allergic dermatitis patients, 70 (73.7%) had metallic items investigated for nickel release. A total of 151 items were investigated, and 66 (43.7%) gave positive DMG test reactions. Objects were nearly all purchased or acquired after the introduction of the EU Nickel Directive. Only one object had been inherited, and only two objects had been purchased outside of Denmark. DMG testing is valuable as a screening test for nickel release and should be used to identify relevant exposures in nickel-allergic patients. Mainly consumer items, but also work tools used in an occupational setting, released nickel in dermatitis patients. This study confirmed 'risk items' from previous studies, including mobile phones.

  1. Criteria Considered in Selecting Feed Items for Americium-241 Oxide Production Operations

    Energy Technology Data Exchange (ETDEWEB)

    Schulte, Louis D. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-01-30

    The analysis in this document serves the purpose of defining a number of attributes in selection of feed items to be utilized in recovery/recycle of Pu and also production operations of 241AmO2 material intended to meet specification requirements. This document was written in response to a specific request on the part of the 2014 annual program review which took place over the dates of October 28-29, 2014. A number of feed attributes are noted including: (1) Non-interference with existing Pu recovery operations; (2) Content of sufficient 241Am to allow process efficiency in recovery operations; (3) Absence of indications that 243Am might be mixed in with the Pu/241Am material; (4) Absence of indications that Cm might be mixed in with the Pu/241Am material; (5) Absence of indications of other chemical elements that would present difficulty in chemical separation from 241Am; (6) Feed material not expected to present difficulty in dissolution; (7) Dose issues; (8) Process efficiency; (9) Size; (10) Hazard associated with items and package configuration in the vault; (11) Within existing NEPA documentation. The analysis in this document provides a baseline of attributes considered for feed materials, but does not presume to replace the need for technical expertise and judgment on the part of individuals responsible for selecting the material feed to be processed. This document is not comprehensive as regards all attributes that could prove to be important. The value of placing a formal QA hold point on accepting feed items versus more informal management of feed items is discussed in the summation of this analysis. The existing planned QA hold points on 241AmO2 products produced and packaged may be adequate as the entire project is based on QA of the product rather than QA of the process. The probability of introduction of items that would inherently cause the241

  2. The 7-item generalized anxiety disorder scale as a tool for measuring generalized anxiety in multiple sclerosis.

    Science.gov (United States)

    Terrill, Alexandra L; Hartoonian, Narineh; Beier, Meghan; Salem, Rana; Alschuler, Kevin

    2015-01-01

    Generalized anxiety disorder (GAD) is common in multiple sclerosis (MS) but understudied. Reliable and valid measures are needed to advance clinical care and expand research in this area. The objectives of this study were to examine the psychometric properties of the 7-item Generalized Anxiety Disorder Scale (GAD-7) in individuals with MS and to analyze correlates of GAD. Participants (N = 513) completed the anxiety module of the Patient Health Questionnaire (GAD-7). To evaluate psychometric properties of the GAD-7, the sample was randomly split to conduct exploratory and confirmatory factor analyses. Based on the exploratory factor analysis, a one-factor structure was specified for the confirmatory factor analysis, which showed excellent global fit to the data (χ(2) 12 = 15.17, P = .23, comparative fit index = 0.99, root mean square error of approximation = 0.03, standardized root mean square residual = 0.03). The Cronbach alpha (0.75) indicated acceptable internal consistency for the scale. Furthermore, the GAD-7 was highly correlated with the Hospital Anxiety and Depression Scale-Anxiety (r = 0.70). Age and duration of MS were both negatively associated with GAD. Higher GAD-7 scores were observed in women and individuals with secondary progressive MS. Individuals with higher GAD-7 scores also endorsed more depressive symptoms. These findings support the reliability and internal validity of the GAD-7 for use in MS. Correlational analyses revealed important relationships with demographics, disease course, and depressive symptoms, which suggest the need for further anxiety research.

  3. A Bifactor Multidimensional Item Response Theory Model for Differential Item Functioning Analysis on Testlet-Based Items

    Science.gov (United States)

    Fukuhara, Hirotaka; Kamata, Akihito

    2011-01-01

    A differential item functioning (DIF) detection method for testlet-based data was proposed and evaluated in this study. The proposed DIF model is an extension of a bifactor multidimensional item response theory (MIRT) model for testlets. Unlike traditional item response theory (IRT) DIF models, the proposed model takes testlet effects into…

  4. Digital Forensics

    Science.gov (United States)

    Harron, Jason; Langdon, John; Gonzalez, Jennifer; Cater, Scott

    2017-01-01

    The term forensic science may evoke thoughts of blood-spatter analysis, DNA testing, and identifying molds, spores, and larvae. A growing part of this field, however, is that of digital forensics, involving techniques with clear connections to math and physics. This article describes a five-part project involving smartphones and the investigation…

  5. Gender-Based Differential Item Performance in Mathematics Achievement Items.

    Science.gov (United States)

    Doolittle, Allen E.; Cleary, T. Anne

    1987-01-01

    Eight randomly equivalent samples of high school seniors were each given a unique form of the ACT Assessment Mathematics Usage Test (ACTM). Signed measures of differential item performance (DIP) were obtained for each item in the eight ACTM forms. DIP estimates were analyzed and a significant item category effect was found. (Author/LMO)

  6. Digital surfaces and hydrogeologic data for the Floridan aquifer system in Florida and in parts of Georgia, Alabama, and South Carolina

    Science.gov (United States)

    Bellino, Jason C.

    2011-01-01

    A digital dataset for the Floridan aquifer system in Florida and in parts of Georgia, Alabama, and South Carolina was developed from selected reports published as part of the Regional Aquifer-System Analysis (RASA) Program of the U.S. Geological Survey (USGS) in the 1980s. These reports contain maps and data depicting the extent and elevation of both time-stratigraphic and hydrogeologic units of which the aquifer system is composed, as well as data on hydrology, meteorology, and aquifer properties. The three primary reports used for this dataset compilation were USGS Professional Paper 1403-B (Miller, 1986), Professional Paper 1403-C (Bush and Johnston, 1988), and USGS Open-File Report 88-86 (Miller, 1988). Paper maps from Professional Papers 1403-B and 1403-C were scanned and georeferenced to the North American Datum of 1927 (NAD27) using the Lambert Conformal Conic projection (standard parallels 33 and 45 degrees, central longitude -96 degrees, central latitude 39 degrees). Once georeferenced, tracing of pertinent line features contained in each image (for example, contours and faults) was facilitated by specialized software using algorithms that automated much of the process. Resulting digital line features were then processed using standard geographic information system (GIS) software to remove artifacts from the digitization process and to verify and update attribute tables. The digitization process for polygonal features (for example, outcrop areas and unit extents) was completed by hand using GIS software.

  7. Digitalization of highly precise fluxgate magnetometers

    DEFF Research Database (Denmark)

    Cerman, Ales; Kuna, A.; Ripka, P.

    2005-01-01

    This paper describes the theory behind all three known ways of digitalizing the fluxgate magnetometers: analogue magnetometers with digitalized output using high resolution ADC, application of the delta-sigma modulation to the sensor feedback loop and fully digital signal detection. At present time...... the Delta-Sigma ADCs are mostly used for the digitalization of the highly precise fluxgate magnetorneters. The relevant part of the paper demonstrates some pitfalls of their application studied during the design of the magnetometer for the new Czech scientific satellite MIMOSA. The part discussing...... the application of the A-E modulation to the sensor feedback loop theoretically derives the main advantage of this method-increasing of the modulation order and shows its real potential compared to the analog magnetometer with consequential digitalization. The comparison is realized on the modular magnetometer...

  8. Persistence of Memory for Ignored Lists of Digits: Areas of Developmental Constancy and Change.

    Science.gov (United States)

    Cowan, Nelson; Nugent, Lara D.; Elliott, Emily M.; Saults, J. Scott

    2000-01-01

    Examined persistence of sensory memory by studying developmental differences in recall of attended and ignored lists of digits for second-graders, fifth-graders, and adults. Found developmental increase in the persistence of memory only for the final item in an ignored list, which is the item for which sensory memory is thought to be the most…

  9. Can Item Keyword Feedback Help Remediate Knowledge Gaps?

    Science.gov (United States)

    Feinberg, Richard A; Clauser, Amanda L

    2016-10-01

    In graduate medical education, assessment results can effectively guide professional development when both assessment and feedback support a formative model. When individuals cannot directly access the test questions and responses, a way of using assessment results formatively is to provide item keyword feedback. The purpose of the following study was to investigate whether exposure to item keyword feedback aids in learner remediation. Participants included 319 trainees who completed a medical subspecialty in-training examination (ITE) in 2012 as first-year fellows, and then 1 year later in 2013 as second-year fellows. Performance on 2013 ITE items in which keywords were, or were not, exposed as part of the 2012 ITE score feedback was compared across groups based on the amount of time studying (preparation). For the same items common to both 2012 and 2013 ITEs, response patterns were analyzed to investigate changes in answer selection. Test takers who indicated greater amounts of preparation on the 2013 ITE did not perform better on the items in which keywords were exposed compared to those who were not exposed. The response pattern analysis substantiated overall growth in performance from the 2012 ITE. For items with incorrect responses on both attempts, examinees selected the same option 58% of the time. Results from the current study were unsuccessful in supporting the use of item keywords in aiding remediation. Unfortunately, the results did provide evidence of examinees retaining misinformation.

  10. Evaluation of psychometric properties and differential item functioning of 8-item Child Perceptions Questionnaires using item response theory.

    Science.gov (United States)

    Yau, David T W; Wong, May C M; Lam, K F; McGrath, Colman

    2015-08-19

    Four-factor structure of the two 8-item short forms of Child Perceptions Questionnaire CPQ11-14 (RSF:8 and ISF:8) has been confirmed. However, the sum scores are typically reported in practice as a proxy of Oral health-related Quality of Life (OHRQoL), which implied a unidimensional structure. This study first assessed the unidimensionality of 8-item short forms of CPQ11-14. Item response theory (IRT) was employed to offer an alternative and complementary approach of validation and to overcome the limitations of classical test theory assumptions. A random sample of 649 12-year-old school children in Hong Kong was analyzed. Unidimensionality of the scale was tested by confirmatory factor analysis (CFA), principle component analysis (PCA) and local dependency (LD) statistic. Graded response model was fitted to the data. Contribution of each item to the scale was assessed by item information function (IIF). Reliability of the scale was assessed by test information function (TIF). Differential item functioning (DIF) across gender was identified by Wald test and expected score functions. Both CPQ11-14 RSF:8 and ISF:8 did not deviate much from the unidimensionality assumption. Results from CFA indicated acceptable fit of the one-factor model. PCA indicated that the first principle component explained >30 % of the total variation with high factor loadings for both RSF:8 and ISF:8. Almost all LD statistic items suggesting little contribution of information to the scale and item removal caused little practical impact. Comparing the TIFs, RSF:8 showed slightly better information than ISF:8. In addition to oral symptoms items, the item "Concerned with what other people think" demonstrated a uniform DIF (p Items related to oral symptoms were not informative to OHRQoL and deletion of these items is suggested. The impact of DIF across gender on the overall score was minimal. CPQ11-14 RSF:8 performed slightly better than ISF:8 in measurement precision. The 6-item short forms

  11. Digitization: surely it can’t be that difficult?

    Directory of Open Access Journals (Sweden)

    David Walsh

    2013-11-01

    Full Text Available With some five million collections items comprising art, film, photographs, sound, new media, writings and objects, the possibilities which digitization opens up for the Imperial War Museums (IWM are only limited by the imagination: new ways of reaching and engaging with audiences, slicker commercial activities, online access to superbly restored film and photographic images. But without the financial clout of a Google-style business, and where systems and standards are still very much in development, heritage institutions struggle to bridge the gulf between aspiration and reality. Hiding behind the term digitization lies a mass of activities and responsibilities, all critical to its success. With several years of experience of digitizing anything from posters to motion picture film, and of capturing high-quality digital images of a range of objects from medals to missiles, IWM has now learnt, often the hard way, most of the lessons.

  12. Pattern analysis of total item score and item response of the Kessler Screening Scale for Psychological Distress (K6 in a nationally representative sample of US adults

    Directory of Open Access Journals (Sweden)

    Shinichiro Tomitaka

    2017-02-01

    Full Text Available Background Several recent studies have shown that total scores on depressive symptom measures in a general population approximate an exponential pattern except for the lower end of the distribution. Furthermore, we confirmed that the exponential pattern is present for the individual item responses on the Center for Epidemiologic Studies Depression Scale (CES-D. To confirm the reproducibility of such findings, we investigated the total score distribution and item responses of the Kessler Screening Scale for Psychological Distress (K6 in a nationally representative study. Methods Data were drawn from the National Survey of Midlife Development in the United States (MIDUS, which comprises four subsamples: (1 a national random digit dialing (RDD sample, (2 oversamples from five metropolitan areas, (3 siblings of individuals from the RDD sample, and (4 a national RDD sample of twin pairs. K6 items are scored using a 5-point scale: “none of the time,” “a little of the time,” “some of the time,” “most of the time,” and “all of the time.” The pattern of total score distribution and item responses were analyzed using graphical analysis and exponential regression model. Results The total score distributions of the four subsamples exhibited an exponential pattern with similar rate parameters. The item responses of the K6 approximated a linear pattern from “a little of the time” to “all of the time” on log-normal scales, while “none of the time” response was not related to this exponential pattern. Discussion The total score distribution and item responses of the K6 showed exponential patterns, consistent with other depressive symptom scales.

  13. Digital technical map of Košice city

    Directory of Open Access Journals (Sweden)

    Štefan Kuzevič

    2007-06-01

    Full Text Available The digital map of a city is comprised complex of the map. Process of creation of the digital map of a city is time consuming and financially demanding. The digital map is created as co-operation of the local authority, technology network administrator, companies, and local government. The exact and current digital map of the city utilizable for multilateral applications is the result of this co-operation. The digital map of city catch all important phenomenon and objects which are needed for making decisions and planning to all grades controlling the local authority. The Geographic information systems tools make possible updating digital map, analyses and syntheses spatial phenomena and theirs relationships. The digital map of city is created step by step. The digital technical map of city is one of very important part of the digital map. Illustration of the part digital technical map of Košice is showed in the Fig. 1.

  14. Contribution to the study of integrated system design in digital imaging. Application to digital radiology

    International Nuclear Information System (INIS)

    Boy, M.

    1987-02-01

    In the first part of this work, we describe the hardware and software used to design integrated systems able to acquire, memorize, process and visualize 1024 x 1024 x 8 bits images. In the second part, we present and analyse the first realised prototype system which is a digital radiology one. After a technical and economical digital radiology study, we present the angiographic and tomographic results. In the third part, we indicate possible evolution of this system and we show how the adopted structure and developed hardware allow applications in various fields [fr

  15. Problematizing Digital Research Evaluation using DOIs in Practice-Based Arts, Humanities and Social Science Research.

    Science.gov (United States)

    Swijghuisen Reigersberg, Muriel

    2015-01-01

    This paper explores emerging practices in research data management in the arts, humanities and social sciences (AHSS). It will do so vis-à-vis current citation conventions and impact measurement for research in AHSS. Case study findings on research data inventoried at Goldsmiths', University of London will be presented. Goldsmiths is a UK research-intensive higher education institution which specialises in arts, humanities and social science research. The paper's aim is to raise awareness of the subject-specific needs of AHSS scholars to help inform the design of future digital tools for impact analysis in AHSS. Firstly, I shall explore the definition of research data and how it is currently understood by AHSS researchers. I will show why many researchers choose not to engage with digital dissemination techniques and ORCID. This discussion must necessarily include the idea that practice-based and applied AHSS research are processes which are not easily captured in numerical 'sets' and cannot be labelled electronically without giving careful consideration to what a group or data item 'represents' as part of the academic enquiry, and therefore how it should be cited and analysed as part of any impact assessment. Then, the paper will explore: the role of the monograph and arts catalogue in AHSS scholarship; how citation practices and digital impact measurement in AHSS currently operate in relation to authorship and how digital identifiers may hypothetically impact on metrics, intellectual property (IP), copyright and research integrity issues in AHSS. I will also show that, if we are to be truly interdisciplinary, as research funders and strategic thinkers say we should, it is necessary to revise the way we think about digital research dissemination. This will involve breaking down the boundaries between AHSS and other types of research.

  16. The role of long-term memory in digit-symbol test performance in young and older adults.

    Science.gov (United States)

    Stephens, R; Kaufman, A

    2009-03-01

    The psychological functions assessed by substitution tests, and the age-related performance decline, are not well understood. Here several aspects of long-term memory were manipulated across younger and older adults. A 45-page Digit-Symbol test was employed. Each page contained a 9-item digit symbol code-table and 9 response items. There were 9 study conditions with each condition deployed across 5 pages, or trials, of the test. The conditions were formed by crossing two within-subjects factors, each with 3 levels. The first factor, Digit Order, pertained to having the code table digits in numerical order vs. a pseudo-random order fixed across trials vs. a pseudo-random order that varied across trials. The second factor, Symbol Pairing, pertained to having a fixed digit-symbol pairing across trials vs. having a varying digit-symbol pairing across trials vs. having a novel set of 9 symbols introduced on each of the 5 trials. Including the additional factor, Age, resulted in a 2 x 3 x 3 mixed randomised block design. The older group was slowed, F(1, 22) = 17.267, p Symbol-Order interaction indicated that use of novel symbols disadvantaged only the older participants, F(1, 44) = 6.577, p = .014. While there was no evidence that incidental paired-associate learning or spatial memory affect digit-symbol performance, symbol familiarity may be important to digit symbol test completion in older adults. The benefit of ordinally arranged digits in the coding table highlights a fundamental process difference between Digit-Symbol and Symbol-Digit test formats.

  17. State of the art and trends for digital pathology.

    Science.gov (United States)

    García Rojo, Marcial

    2012-01-01

    Anatomic pathology is a medical specialty where both information management systems and digital images systems paly a most important role. Digital pathology is a new concept that considers all uses of this information, including diagnosis, biomedical research and education. Virtual microscopy or whole slide imaging, resulting in digital slides, is an outreaching technology in anatomic pathology. Limiting factors in the expansion of virtual microscopy are formidable storage dimension, scanning speed, quality of image and cultural change. Anatomic pathology data and images should be an important part of the patient electronic health records as well as of clinical data warehouse, epidemiological or biomedical research databases, and platforms dedicated to translational medicine. Integrating anatomic pathology to the "healthcare enterprise" can only be achieved using existing and emerging medical informatics standards like Digital Imaging and Communications in Medicine (DICOM®1), Health Level Seven (HL7®), and Systematized Nomenclature of Medicine-Clinical Terms (SNOMED CT®), following the recommendations of Integrating the Healthcare Enterprise (IHE®). The consequences of the full digitalization of pathology departments are hard to foresee, but short term issues have arisen that imply interesting challenges for health care standards bodies.

  18. Purchasing behaviour on aesthetic items in online video games with real currency : The case of Counter Strike: Global Offensive

    OpenAIRE

    Rodríguez, Bruno

    2017-01-01

    Over the last decade, buying in-game content with real money has become a more common practice among players in order to unlock exclusive content in video games. Prior research has mainly focused on those functional digital items that provide an advantage to the buyer. This thesis aims to determine the underlying factors that influence video game players to purchase purely aesthetic virtual items.Prior studies on the field of video games, gaming business models and purchasing behaviour were r...

  19. Internal consistency of a five-item form of the Francis Scale of Attitude Toward Christianity among adolescent students.

    Science.gov (United States)

    Campo-Arias, Adalberto; Oviedo, Heidi Celina; Cogollo, Zuleima

    2009-04-01

    The short form of the Francis Scale of Attitude Toward Christianity (L. J. Francis, 1992) is a 7-item Likert-type scale that shows high homogeneity among adolescents. The psychometric performance of a shorter version of this scale has not been explored. The authors aimed to determine the internal consistency of a 5-item form of the Francis Scale of Attitude Toward Christianity among 405 students from a school in Cartagena, Colombia. The authors computed the Cronbach's alpha coefficient for the 5 items with a greater corrected item-total punctuation correlation. The version without Items 2 and 7 showed internal consistency of .87. The 5-item version of the Francis Scale of Attitude Toward Christianity exhibited higher internal consistency than did the 7-item version. Future researchers should corroborate this finding.

  20. Digital radiography in tomography of the facial part of the skull

    International Nuclear Information System (INIS)

    Ibing, H.P.; Vogel, H.; Biebesheimer, V.

    1988-01-01

    In 14 patients the X-ray findings of dental, mandibulary and maxillary roentgen diagnosis were compared with conventional tomography and tomography by digital radiography. All details important for diagnosis were shown by both techniques. Tomography by digital radiography offered a more convenient approach and pictures easier to be interpreted than pictures by conventional tomography. (orig.) [de

  1. Analog-to-digital conversion

    CERN Document Server

    Pelgrom, Marcel J M

    2010-01-01

    The design of an analog-to-digital converter or digital-to-analog converter is one of the most fascinating tasks in micro-electronics. In a converter the analog world with all its intricacies meets the realm of the formal digital abstraction. Both disciplines must be understood for an optimum conversion solution. In a converter also system challenges meet technology opportunities. Modern systems rely on analog-to-digital converters as an essential part of the complex chain to access the physical world. And processors need the ultimate performance of digital-to-analog converters to present the results of their complex algorithms. The same progress in CMOS technology that enables these VLSI digital systems creates new challenges for analog-to-digital converters: lower signal swings, less power and variability issues. Last but not least, the analog-to-digital converter must follow the cost reduction trend. These changing boundary conditions require micro-electronics engineers to consider their design choices for...

  2. 76 FR 62642 - Digital Broadcast Television Redistribution Control; Corrections

    Science.gov (United States)

    2011-10-11

    ... Characteristic,'' (July 6, 2010), as listed below: (i) A/53, Part 1:2007, ``Digital Television System'' (January... FEDERAL COMMUNICATIONS COMMISSION 47 CFR Part 73 [DA 11-1432] Digital Broadcast Television..., Radio, Television. Accordingly, 47 CFR part 73 is corrected by making the following correcting...

  3. Digital Communication and Modulation

    DEFF Research Database (Denmark)

    Sørensen, John Aasted

    2010-01-01

    Fundamental principles in modern digital communication system like modems and wire- and wireless transmission over physical channels. Class room sessions and projects. Semester: Spring 2010 Extent: 7.5 ects Class size: 9......Fundamental principles in modern digital communication system like modems and wire- and wireless transmission over physical channels. Class room sessions and projects. Semester: Spring 2010 Extent: 7.5 ects Class size: 9...

  4. Digital Communication and Modulation

    DEFF Research Database (Denmark)

    Sørensen, John Aasted

    2010-01-01

    Fundamental principles in modern digital communication system like modems and wire- and wireless transmission over physical channels. Class room sessions and projects. Semester: Autumn 2010 Extent: 7.5 ects Class size: 18......Fundamental principles in modern digital communication system like modems and wire- and wireless transmission over physical channels. Class room sessions and projects. Semester: Autumn 2010 Extent: 7.5 ects Class size: 18...

  5. Digital logic circuit design with ALTERA MAX+PLUS II

    International Nuclear Information System (INIS)

    Lee, Seung Ho; Park, Yong Su; Park, Gun Jong; Lee, Ju Heon

    2006-09-01

    This book is composed of five parts. The first part has introduction of ALTERA MAX+PLUS II and graphic editor, text editor, compiler, waveform editor simulator and timing analyzer of it. The second part is about direction of digital logic circuit design with training kit. The third part has grammar and practice of VHDL in ALTERA MAX+PLUS II including example and history of VHDL. The fourth part shows the design example of digital logic circuit by VHDL of ALTERA MAX+PLUS II which lists designs of adder and subtractor, code converter, counter, state machine and LCD module. The last part explains design example of digital logic circuit by graphic editor in ALTERA MAX+PLUS II.

  6. A global snapshot of the state of digital collections in the health sciences, 2013.

    Science.gov (United States)

    Pickett, Keith M; Knapp, Maureen M

    2014-04-01

    Two hundred twenty-nine health sciences libraries (HSLs) worldwide were surveyed regarding the availability of digital collections, evidence of the type of digital collections, level of access, software used, and HSL type. Of the surveyed libraries, 69% (n = 157) had digital collections, with an average of 1,531 items in each collection; 49% (n = 112) also had institutional repositories. In most cases (n = 147), these collections were publicly available. The predominant platforms for disseminating these digital collections were CONTENTdm and library web pages. Only 50% (n = 77) of these collections were managed by the health sciences library itself.

  7. What Makes the Digital "Special"? The Research Program in Digital Collections at the National Library of Wales

    Science.gov (United States)

    Cusworth, Andrew; Hughes, Lorna M.; James, Rhian; Roberts, Owain; Roderick, Gareth Lloyd

    2015-01-01

    This article introduces some of the digital projects currently in development at the National Library of Wales as part of its Research Program in Digital Collections. These projects include the digital representation of the Library's Kyffin Willams art collection, musical collections, and probate collection, and of materials collected by the…

  8. Advanced Digital Preservation

    CERN Document Server

    Giaretta, David

    2011-01-01

    There is growing recognition of the need to address the fragility of digital information, on which our society heavily depends for smooth operation in all aspects of daily life. This has been discussed in many books and articles on digital preservation, so why is there a need for yet one more? Because, for the most part, those other publications focus on documents, images and webpages -- objects that are normally rendered to be simply displayed by software to a human viewer. Yet there are clearly many more types of digital objects that may need to be preserved, such as databases, scientific da

  9. A Multidimensional Tool Based on the eHealth Literacy Framework: Development and Initial Validity Testing of the eHealth Literacy Questionnaire (eHLQ).

    Science.gov (United States)

    Kayser, Lars; Karnoe, Astrid; Furstrand, Dorthe; Batterham, Roy; Christensen, Karl Bang; Elsworth, Gerald; Osborne, Richard H

    2018-02-12

    For people to be able to access, understand, and benefit from the increasing digitalization of health services, it is critical that services are provided in a way that meets the user's needs, resources, and competence. The objective of the study was to develop a questionnaire that captures the 7-dimensional eHealth Literacy Framework (eHLF). Draft items were created in parallel in English and Danish. The items were generated from 450 statements collected during the conceptual development of eHLF. In all, 57 items (7 to 9 items per scale) were generated and adjusted after cognitive testing. Items were tested in 475 people recruited from settings in which the scale was intended to be used (community and health care settings) and including people with a range of chronic conditions. Measurement properties were assessed using approaches from item response theory (IRT) and classical test theory (CTT) such as confirmatory factor analysis (CFA) and reliability using composite scale reliability (CSR); potential bias due to age and sex was evaluated using differential item functioning (DIF). CFA confirmed the presence of the 7 a priori dimensions of eHLF. Following item analysis, a 35-item 7-scale questionnaire was constructed, covering (1) using technology to process health information (5 items, CSR=.84), (2) understanding of health concepts and language (5 items, CSR=.75), (3) ability to actively engage with digital services (5 items, CSR=.86), (4) feel safe and in control (5 items, CSR=.87), (5) motivated to engage with digital services (5 items, CSR=.84), (6) access to digital services that work (6 items, CSR=.77), and (7) digital services that suit individual needs (4 items, CSR=.85). A 7-factor CFA model, using small-variance priors for cross-loadings and residual correlations, had a satisfactory fit (posterior productive P value: .27, 95% CI for the difference between the observed and replicated chi-square values: -63.7 to 133.8). The CFA showed that all items loaded

  10. 48 CFR 12.000 - Scope of part.

    Science.gov (United States)

    2010-10-01

    ... (Public Law 103-355) by establishing acquisition policies more closely resembling those of the commercial... ACQUISITION OF COMMERCIAL ITEMS 12.000 Scope of part. This part prescribes policies and procedures unique to the acquisition of commercial items. It implements the Federal Government's preference for the...

  11. Regeneration and repair of human digits and limbs: fact and fiction.

    Science.gov (United States)

    Shieh, Shyh-Jou; Cheng, Tsun-Chih

    2015-08-01

    A variety of digit and limb repair and reconstruction methods have been used in different clinical settings, but regeneration remains an item on every plastic surgeon's "wish list." Although surgical salvage techniques are continually being improved, unreplantable digits and limbs are still abundant. We comprehensively review the structural and functional salvage methods in clinical practice, from the peeling injuries of small distal fingertips to multisegmented amputated limbs, and the developmental and tissue engineering approaches for regenerating human digits and limbs in the laboratory. Although surgical techniques have forged ahead, there are still situations in which digits and limbs are unreplantable. Advances in the field are delineated, and the regeneration processes of salamander limbs, lizard tails, and mouse digits and each component of tissue engineering approaches for digit- and limb-building are discussed. Although the current technology is promising, there are many challenges in human digit and limb regeneration. We hope this review inspires research on the critical gap between clinical and basic science, and leads to more sophisticated digit and limb loss rescue and regeneration innovations.

  12. Digital control of research reactors

    International Nuclear Information System (INIS)

    Crump, J.C. III.; Richards, W.J.; Heidel, C.C.

    1991-01-01

    Research reactors provide an important service for the nuclear industry. Developments and innovations used for research reactors can be later applied to larger power reactors. Their relatively inexpensive cost allows research reactors to be an excellent testing ground for the reactors of tomorrow. One area of current interest is digital control of research reactor systems. Digital control systems offer the benefits of implementation and superior system response over their analog counterparts. At McClellan Air Force Base in Sacramento, California, the Stationary Neutron Radiography System (SNRS) uses a 1,000-kW TRIGA reactor for neutron radiography and other nuclear research missions. The neutron radiography beams generated by the reactor are used to detect corrosion in aircraft structures. While the use of the reactor to inspect intact F-111 wings is in itself noteworthy, there is another area in which the facility has applied new technology: the instrumentation and control system (ICS). The ICS developed by General Atomics (GA) contains several new and significant items: (a) the ability to servocontrol on three rods, (b) the ability to produce a square wave, and (c) the use of a software configurator to tune parameters affected by the actual reactor core dynamics. These items will probably be present in most, if not all, future research reactors. They were developed with increased control and overall usefulness of the reactor in mind

  13. Quantification and detoxification of aflatoxin in food items

    Energy Technology Data Exchange (ETDEWEB)

    Nisa, A. U.; Hina, S.; Ejaz, N. [Pakistan Council of Scientific and Industrial Research Laboratories, Lahore (Pakistan). Dept. of Food and Biotechnology

    2013-07-15

    The present study was conducted to quantify and detoxify the antitoxins in food items. For this purpose, total 30 samples of food were collected. The samples were quantified using thin layer chromatography (TLC) for the presence of aflatoxin level in food items. Out of them aflatoxins were not found in 10 samples. Remaining 20 aflatoxins +ve samples were treated with various chemical solutions i.e. 0.1% HCl, 0.3%HCl, 0.5% HCI, 10% citric acid, 30% citric acid, 50% calcium hydroxide, 0.2 and 0.3% NaOCl, 96% ethanol and 99% acetone for detoxification. The aflatoxins were reduced to 55.1%, 90.9%, 28.08% and 80.0% in Super Sella rice, Super Basmati rice, Brown rice and White rice, respectively. The aflatoxin level was reduced in maize grain, damaged wheat, peanut, figs and dates upto 31.3 %, 64.3 %, 63.6%, 42.7% and 19.8%, respectively. Aflatoxins were detoxified in cereals Dal Chana, Dal Mash, Dal Masoor, turmeric (Haldi) and Nigela seeds (Kalwangi) upto 70.5%, 83.0%, 46.2%, 82.09% and 36.9%, respectively. Reduction of aflatoxins was carried out 39.7 %,7.l % 39.5% 82.0% and 62.0% in red chilli, makhana, corn flakes, desert (Kheer Mix) and pistachio. The significant results (p = 0.042) of detoxification of aflatoxins in food items were obtained from present study. (author)

  14. Quantification and detoxification of aflatoxin in food items

    International Nuclear Information System (INIS)

    Nisa, A.U.; Hina, S.; Ejaz, N.

    2013-01-01

    The present study was conducted to quantify and detoxify the antitoxins in food items. For this purpose, total 30 samples of food were collected. The samples were quantified using thin layer chromatography (TLC) for the presence of aflatoxin level in food items. Out of them aflatoxins were not found in 10 samples. Remaining 20 aflatoxins +ve samples were treated with various chemical solutions i.e. 0.1% HCl, 0.3%HCl, 0.5% HCI, 10% citric acid, 30% citric acid, 50% calcium hydroxide, 0.2 and 0.3% NaOCl, 96% ethanol and 99% acetone for detoxification. The aflatoxins were reduced to 55.1%, 90.9%, 28.08% and 80.0% in Super Sella rice, Super Basmati rice, Brown rice and White rice, respectively. The aflatoxin level was reduced in maize grain, damaged wheat, peanut, figs and dates upto 31.3 %, 64.3 %, 63.6%, 42.7% and 19.8%, respectively. Aflatoxins were detoxified in cereals Dal Chana, Dal Mash, Dal Masoor, turmeric (Haldi) and Nigela seeds (Kalwangi) upto 70.5%, 83.0%, 46.2%, 82.09% and 36.9%, respectively. Reduction of aflatoxins was carried out 39.7 %,7.l % 39.5% 82.0% and 62.0% in red chilli, makhana, corn flakes, desert (Kheer Mix) and pistachio. The significant results (p = 0.042) of detoxification of aflatoxins in food items were obtained from present study. (author)

  15. Verification and validation as an integral part of the development of digital systems for nuclear applications

    International Nuclear Information System (INIS)

    Straker, E.A.; Thomas, N.C.

    1983-01-01

    The nuclear industry's current attitude toward verification and validation (V and V) is realized through the experiences gained to date. On the basis of these experiences, V and V can effectively be applied as an integral part of digital system development for nuclear electric power applications. An overview of a typical approach for integrating V and V with system development is presented. This approach represents a balance between V and V as applied in the aerospace industry and the standard practice commonly applied within the nuclear industry today

  16. Digitized forensics: retaining a link between physical and digital crime scene traces using QR-codes

    Science.gov (United States)

    Hildebrandt, Mario; Kiltz, Stefan; Dittmann, Jana

    2013-03-01

    The digitization of physical traces from crime scenes in forensic investigations in effect creates a digital chain-of-custody and entrains the challenge of creating a link between the two or more representations of the same trace. In order to be forensically sound, especially the two security aspects of integrity and authenticity need to be maintained at all times. Especially the adherence to the authenticity using technical means proves to be a challenge at the boundary between the physical object and its digital representations. In this article we propose a new method of linking physical objects with its digital counterparts using two-dimensional bar codes and additional meta-data accompanying the acquired data for integration in the conventional documentation of collection of items of evidence (bagging and tagging process). Using the exemplary chosen QR-code as particular implementation of a bar code and a model of the forensic process, we also supply a means to integrate our suggested approach into forensically sound proceedings as described by Holder et al.1 We use the example of the digital dactyloscopy as a forensic discipline, where currently progress is being made by digitizing some of the processing steps. We show an exemplary demonstrator of the suggested approach using a smartphone as a mobile device for the verification of the physical trace to extend the chain-of-custody from the physical to the digital domain. Our evaluation of the demonstrator is performed towards the readability and the verification of its contents. We can read the bar code despite its limited size of 42 x 42 mm and rather large amount of embedded data using various devices. Furthermore, the QR-code's error correction features help to recover contents of damaged codes. Subsequently, our appended digital signature allows for detecting malicious manipulations of the embedded data.

  17. 16 CFR Appendix E to Part 436 - Sample Item 20(4) Table-Status of Company-Owned Outlets

    Science.gov (United States)

    2010-01-01

    ... RULES DISCLOSURE REQUIREMENTS AND PROHIBITIONS CONCERNING FRANCHISING Pt. 436, App. E Appendix E to Part... 5Outlets Reacquired From Franchisees Column 6Outlets Closed Column 7Outlets Sold to Franchisees Column...

  18. Tribodynamic Modeling of Digital Fluid Power Motors

    DEFF Research Database (Denmark)

    Johansen, Per

    . In fluid power motoring and pumping units, a significant problem is that loss mechanisms do not scale down with diminishing power throughput. Although machines can reach peak efficiencies above 95%, the actual efficiency during operation, which includes part-load situations, is much lower. The invention...... of digital fluid power displacement units has been able to address this problem. The main idea of the digital fluid power displacement technology is to disable individual chambers, by use of electrical actuated valves. A displacement chamber is disabled by keeping the valve, between the chamber and the low...... design methods and tools are important to the development of digital fluid power machines. The work presented in this dissertation is part of a research program focusing on the development of digital fluid power MW-motors for use in hydraulic drive train in wind turbines. As part of this development...

  19. A METHOD OF SECURITY SCANNING OF CARRY-ON ITEMS, AND A CARRY-ON ITEMS SECURITY SCANNING SYSTEM

    DEFF Research Database (Denmark)

    2017-01-01

    A security scanning system (1) comprises a first stage module (3) having at least one X-ray source (6) and at least three first detectors (7) that are line-shaped and arranged in mutually different orientations and have at least dual energy resolution. A group of carry-on items (4) on a carrier...

  20. Digital Marketing Plan for Healthinki

    OpenAIRE

    Harkai, Orsolya

    2017-01-01

    This paper is a product oriented thesis that introduces digital marketing to a small-­sized hospitality business. The commissioning company is a lifestyle café in the center of Helsinki that serves nutritious, healthy food and beverages. The concept is considered very special, since the owner of the café is a holistic health coach. The study consists of two main parts: the theoretical framework and the product itself. The first part explains the importance and relevancy of digital marketi...

  1. Conceptual design report: Nuclear materials storage facility renovation. Part 7, Estimate data

    International Nuclear Information System (INIS)

    1995-01-01

    The Nuclear Materials Storage Facility (NMSF) at the Los Alamos National Laboratory (LANL) was a Fiscal Year (FY) 1984 line-item project completed in 1987 that has never been operated because of major design and construction deficiencies. This renovation project, which will correct those deficiencies and allow operation of the facility, is proposed as an FY 97 line item. The mission of the project is to provide centralized intermediate and long-term storage of special nuclear materials (SNM) associated with defined LANL programmatic missions and to establish a centralized SNM shipping and receiving location for Technical Area (TA)-55 at LANL. Based on current projections, existing storage space for SNM at other locations at LANL will be loaded to capacity by approximately 2002. This will adversely affect LANUs ability to meet its mission requirements in the future. The affected missions include LANL's weapons research, development, and testing (WRD ampersand T) program; special materials recovery; stockpile survelliance/evaluation; advanced fuels and heat sources development and production; and safe, secure storage of existing nuclear materials inventories. The problem is further exacerbated by LANL's inability to ship any materials offsite because of the lack of receiver sites for mate rial and regulatory issues. Correction of the current deficiencies and enhancement of the facility will provide centralized storage close to a nuclear materials processing facility. The project will enable long-term, cost-effective storage in a secure environment with reduced radiation exposure to workers, and eliminate potential exposures to the public. This report is organized according to the sections and subsections outlined by Attachment III-2 of DOE Document AL 4700.1, Project Management System. It is organized into seven parts. This document, Part VII - Estimate Data, contains the project cost estimate information

  2. Conceptual design report: Nuclear materials storage facility renovation. Part 7, Estimate data

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-07-14

    The Nuclear Materials Storage Facility (NMSF) at the Los Alamos National Laboratory (LANL) was a Fiscal Year (FY) 1984 line-item project completed in 1987 that has never been operated because of major design and construction deficiencies. This renovation project, which will correct those deficiencies and allow operation of the facility, is proposed as an FY 97 line item. The mission of the project is to provide centralized intermediate and long-term storage of special nuclear materials (SNM) associated with defined LANL programmatic missions and to establish a centralized SNM shipping and receiving location for Technical Area (TA)-55 at LANL. Based on current projections, existing storage space for SNM at other locations at LANL will be loaded to capacity by approximately 2002. This will adversely affect LANUs ability to meet its mission requirements in the future. The affected missions include LANL`s weapons research, development, and testing (WRD&T) program; special materials recovery; stockpile survelliance/evaluation; advanced fuels and heat sources development and production; and safe, secure storage of existing nuclear materials inventories. The problem is further exacerbated by LANL`s inability to ship any materials offsite because of the lack of receiver sites for mate rial and regulatory issues. Correction of the current deficiencies and enhancement of the facility will provide centralized storage close to a nuclear materials processing facility. The project will enable long-term, cost-effective storage in a secure environment with reduced radiation exposure to workers, and eliminate potential exposures to the public. This report is organized according to the sections and subsections outlined by Attachment III-2 of DOE Document AL 4700.1, Project Management System. It is organized into seven parts. This document, Part VII - Estimate Data, contains the project cost estimate information.

  3. Can items used in 4-year-old well-child visits predict children's health and school outcomes?

    Science.gov (United States)

    Smithers, Lisa G; Chittleborough, Catherine R; Stocks, Nigel; Sawyer, Michael G; Lynch, John W

    2014-08-01

    To examine whether items comprising a preschool well-child check for use by family doctors in Australia with 4-5-year old children predicts health and academic outcomes at 6-7 years. The well-child check includes mandatory (anthropometry, eye/vision, ear/hearing, dental, toileting, allergy problems) and non-mandatory (processed food consumption, low physical activity, motor, behaviour/mood problems) items. The predictive validity of mandatory and non-mandatory items measured at 4-5 years was examined using data from the Longitudinal Study of Australian Children. Outcomes at 6-7 years included overweight/obesity, asthma, health care/medication needs, general health, mental health problems, quality of life, teacher-reported mathematics and literacy ability (n = 2,280-2,787). Weight or height >90th centile at 4-5 years predicted overweight/obesity at 6-7 years with 60% sensitivity, 79% specificity and 40% positive predictive value (PPV). Mood/behaviour problems at 4-5 predicted mental health problems at 6-7 years with 86% sensitivity, 40% specificity and 8% PPV. Non-mandatory items improved the discrimination between children with and without mental health problems at 6-7 years (area under the receiver operating characteristic curve 0.75 compared with 0.69 for mandatory items only), but was weak for most outcomes. Items used in a well-child health check were moderate predictors of overweight/obesity and mental health problems at 6-7 years, but poor predictors of other health and academic outcomes.

  4. Digitální nomádství

    OpenAIRE

    Petráková, Veronika

    2017-01-01

    This bachelor thesis deals with the complex introduction of the new trend of livelihood - digital nomadism and examines the economic aspect of this phenomenon. In the theoretical part, digital nomadism is introduced and explains how digital nomads can earn money and what types of work they perform most often. Furthermore, the specifics of distance learning and the specifics of employment of remote workers are described here. In the practical part is described and evaluated questionnaire surve...

  5. Development of a questionnaire to assess patient satisfaction with allergen-specific immunotherapy in adults: item generation, item reduction, and preliminary validation

    Directory of Open Access Journals (Sweden)

    Justícia JL

    2011-05-01

    Full Text Available Jose Luis Justícia1, Eva Baró2, Victoria Cardona3, Pedro Guardia4, Pedro Ojeda5, José Maria Olaguíbel6, José Maria Vega7, Carmen Vidal81Medical Department, Stallergenes Ibérica, Barcelona, Spain; 2Health Outcomes Research Department, 3D Health Research, Barcelona, Spain; 3Hospital Vall d'Hebron, Barcelona, Spain; 4Hospital Virgen Macarena, Sevilla, Spain; 5Clínica de Asma y Alergia Dres. Ojeda, Madrid, Spain; 6Complejo Hospitalario de Navarra, Pamplona, Spain; 7Hospital Regional Universitario Carlos Haya Málaga, Spain; 8Complejo Hospitalario Universitario de Santiago, Santiago de Compostela, SpainBackground: Allergen-specific immunotherapy (SIT is a treatment capable of modifying the natural course of allergy, so ensuring good adherence to SIT is fundamental. Up until now there has not existed an instrument specifically developed to measure patient satisfaction with SIT, although its assessment could help us to comprehend better and improve treatment adherence and effectiveness. The aim of this study was to develop an instrument to measure adult patient satisfaction with SIT.Methods: Items were generated from a literature review, focus groups with allergic adult patients undergoing SIT, and a meeting with experts. Potential items were administered to allergic patients undergoing SIT in an observational, cross-sectional, multicenter study. Item reduction was based on quantitative and qualitative criteria. A preliminary assessment of feasibility, reliability, and validity of the retained items was performed.Results: An initial pool of 70 items was administered to 257 patients undergoing SIT. Fifty-four items were eliminated resulting in a provisional instrument with 16 items. Factor analysis yielded four factors that were identified as perceived efficacy, activities and environment, cost-benefit balance, and overall satisfaction, explaining 74.8% of variance. Ceiling and floor effects were negligible for overall score. Overall score was

  6. The role of attention in item-item binding in visual working memory.

    Science.gov (United States)

    Peterson, Dwight J; Naveh-Benjamin, Moshe

    2017-09-01

    An important yet unresolved question regarding visual working memory (VWM) relates to whether or not binding processes within VWM require additional attentional resources compared with processing solely the individual components comprising these bindings. Previous findings indicate that binding of surface features (e.g., colored shapes) within VWM is not demanding of resources beyond what is required for single features. However, it is possible that other types of binding, such as the binding of complex, distinct items (e.g., faces and scenes), in VWM may require additional resources. In 3 experiments, we examined VWM item-item binding performance under no load, articulatory suppression, and backward counting using a modified change detection task. Binding performance declined to a greater extent than single-item performance under higher compared with lower levels of concurrent load. The findings from each of these experiments indicate that processing item-item bindings within VWM requires a greater amount of attentional resources compared with single items. These findings also highlight an important distinction between the role of attention in item-item binding within VWM and previous studies of long-term memory (LTM) where declines in single-item and binding test performance are similar under divided attention. The current findings provide novel evidence that the specific type of binding is an important determining factor regarding whether or not VWM binding processes require attention. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  7. Trace DNA Sampling Success from Evidence Items Commonly Encountered in Forensic Casework.

    Science.gov (United States)

    Dziak, Renata; Peneder, Amy; Buetter, Alicia; Hageman, Cecilia

    2018-05-01

    Trace DNA analysis is a significant part of a forensic laboratory's workload. Knowing optimal sampling strategies and item success rates for particular item types can assist in evidence selection and examination processes and shorten turnaround times. In this study, forensic short tandem repeat (STR) casework results were reviewed to determine how often STR profiles suitable for comparison were obtained from "handler" and "wearer" areas of 764 items commonly submitted for examination. One hundred and fifty-five (155) items obtained from volunteers were also sampled. Items were analyzed for best sampling location and strategy. For casework items, headwear and gloves provided the highest success rates. Experimentally, eyeglasses and earphones, T-shirts, fabric gloves and watches provided the highest success rates. Eyeglasses and latex gloves provided optimal results if the entire surfaces were swabbed. In general, at least 10%, and up to 88% of all trace DNA analyses resulted in suitable STR profiles for comparison. © 2017 American Academy of Forensic Sciences.

  8. Theory of Digital Automata

    CERN Document Server

    Borowik, Bohdan; Lahno, Valery; Petrov, Oleksandr

    2013-01-01

    This book serves a dual purpose: firstly to combine the treatment of circuits and digital electronics, and secondly, to establish a strong connection with the contemporary world of digital systems. The need for this approach arises from the observation that introducing digital electronics through a course in traditional circuit analysis is fast becoming obsolete. Our world has gone digital. Automata theory helps with the design of digital circuits such as parts of computers, telephone systems and control systems. A complete perspective is emphasized, because even the most elegant computer architecture will not function without adequate supporting circuits. The focus is on explaining the real-world implementation of complete digital systems. In doing so, the reader is prepared to immediately begin design and implementation work. This work serves as a bridge to take readers from the theoretical world to the everyday design world where solutions must be complete to be successful.

  9. Managing Documentary Collections Through Digitization

    OpenAIRE

    Deegan, Marylin

    2001-01-01

    Digital collection development is part of a broader perspective on collection development, and generally needs to be assessed using the same criteria. However, there is a difference between reviewing collections already held by the institution with digitization in mind, and choosing to acquire digital materials from elsewhere. In-house holdings have been initially acquired or retained because they are perceived to have some value to the community served by the library, and therefore theoretic...

  10. Column: The Science of Digital Forensics: Analysis of Digital Traces

    Directory of Open Access Journals (Sweden)

    Fred Cohen

    2012-09-01

    Full Text Available In part 1 of this series (Cohen, 2011a, Analysis of digital traces is a foundational process by which the examiner, typically using computer software tools, comes to understand and answer basic questions regarding digital traces.“Input sequences to digital systems produce outputs and state changes as a function of the previous state. To the extent that the state or outputs produce stored and/or captured bit sequences, these form traces of the event sequences that caused them. Thus the definition of a trace may be stated as: "A set of bit sequences produced from the execution of a finite state machine."(see PDF for full column

  11. Regeneration and repair of human digits and limbs: fact and fiction

    Science.gov (United States)

    Cheng, Tsun‐Chih

    2015-01-01

    Abstract A variety of digit and limb repair and reconstruction methods have been used in different clinical settings, but regeneration remains an item on every plastic surgeon's “wish list.” Although surgical salvage techniques are continually being improved, unreplantable digits and limbs are still abundant. We comprehensively review the structural and functional salvage methods in clinical practice, from the peeling injuries of small distal fingertips to multisegmented amputated limbs, and the developmental and tissue engineering approaches for regenerating human digits and limbs in the laboratory. Although surgical techniques have forged ahead, there are still situations in which digits and limbs are unreplantable. Advances in the field are delineated, and the regeneration processes of salamander limbs, lizard tails, and mouse digits and each component of tissue engineering approaches for digit‐ and limb‐building are discussed. Although the current technology is promising, there are many challenges in human digit and limb regeneration. We hope this review inspires research on the critical gap between clinical and basic science, and leads to more sophisticated digit and limb loss rescue and regeneration innovations. PMID:27499873

  12. Practical design of digital circuits basic logic to microprocessors

    CERN Document Server

    Kampel, Ian

    1983-01-01

    Practical Design of Digital Circuits: Basic Logic to Microprocessors demonstrates the practical aspects of digital circuit design. The intention is to give the reader sufficient confidence to embark upon his own design projects utilizing digital integrated circuits as soon as possible. The book is organized into three parts. Part 1 teaches the basic principles of practical design, and introduces the designer to his """"tools"""" - or rather, the range of devices that can be called upon. Part 2 shows the designer how to put these together into viable designs. It includes two detailed descriptio

  13. CMOS based capacitance to digital converter circuit for MEMS sensor

    Science.gov (United States)

    Rotake, D. R.; Darji, A. D.

    2018-02-01

    Most of the MEMS cantilever based system required costly instruments for characterization, processing and also has large experimental setups which led to non-portable device. So there is a need of low cost, highly sensitive, high speed and portable digital system. The proposed Capacitance to Digital Converter (CDC) interfacing circuit converts capacitance to digital domain which can be easily processed. Recent demand microcantilever deflection is part per trillion ranges which change the capacitance in 1-10 femto farad (fF) range. The entire CDC circuit is designed using CMOS 250nm technology. Design of CDC circuit consists of a D-latch and two oscillators, namely Sensor controlled oscillator (SCO) and digitally controlled oscillator (DCO). The D-latch is designed using transmission gate based MUX for power optimization. A CDC design of 7-stage, 9-stage and 11-stage tested for 1-18 fF and simulated using mentor graphics Eldo tool with parasitic. Since the proposed design does not use resistance component, the total power dissipation is reduced to 2.3621 mW for CDC designed using 9-stage SCO and DCO.

  14. End-of-life decision making in respiratory failure. The therapeutic choices in chronic respiratory failure in a 7-item questionnaire

    Directory of Open Access Journals (Sweden)

    Dagmar Elfriede Rinnenburger

    2012-01-01

    Full Text Available INTRODUCTION: The transition from paternalistic medicine to a healthcare culture centred on the patient's decision making autonomy presents problems of communication and understanding. Chronic respiratory failure challenges patients, their families and caregivers with important choices, such as invasive and non-invasive mechanical ventilation and tracheostomy, which, especially in the case of neuromuscular diseases, can significantly postpone the end of life. MATERIAL AND METHODS: A 7-item questionnaire was administered to 100 patients with advanced COPD, neuromuscular diseases and pulmonary fibrosis, all of them on oxygen therapy and receiving day-hospital treatment for respiratory failure. The objective was to find out whether or not patients, if faced with a deterioration of their health condition, would want to take part in the decision making process and, if so, how and with whom. RESULTS. Results showed that: 90% of patients wanted to be interviewed, 10% preferred not to be interviewed, 82% wanted to be regularly updated on their clinical situation, 75% wanted to be intubated, if necessary, and 56% would also agree to have a tracheostomy. These choices have been confirmed one year later, with 93% of respondents accepting the questionnaire and considering it useful. CONCLUSIONS: It is possible to conclude that a simple questionnaire can be a useful tool contributing to therapeutic decision making in respiratory failure.

  15. Digitization of radiographic inspection for pipeline girth welded joints

    International Nuclear Information System (INIS)

    Uemura, Shimpei

    2016-01-01

    In radiographic inspection for the girth welded joints of natural gas pipeline, film radiographic testing (FRT) is applied presently in Japan. However, as of July 2016, the work of establishing JIS standard for radiographic inspection with digital detector is in progress. In order to provide users with the merit of digitization as soon as possible, the authors have developed NSDART (Nittetsu-Sumikin digital detector array technology) as a field X-ray inspection system for the girth welded joints of pipeline. This paper reports the required performances discussed in face of development of NSDART, selection of digital detector, and outline of NSDART, and shows part of the radiographic images acquired with NSDART. As required performances, the following were established: (1) required image quality for radiographic image, (2) identifiable minimum wire diameter of transmission meter, (3) density range of radiographic image and value of gradation meter, (4) spatial resolution via Duplex Wire, (5) X-ray generator, (6) real time performance, and (7) display for observing radiographic image. As for the selection of digital detector, flat panel detector was judged to be the most suitable, and its incorporation to NSDART was determined. NSDART devices are composed of a magnet-wheeled self-propelled imaging device, personal computer, controller, and externally installed display for judgment. (A.O.)

  16. Český trh digitálních agentur: Případová studie Nydrle Digital

    OpenAIRE

    Vondráková, Tereza

    2013-01-01

    The master thesis focuses on description of the market of digital advertising agencies that create digital, online and mobile campaigns for their clients. The first part of the thesis addresses the advertising market and its role in the marketing mix. The author gives the summary of the evolution of digital marketing and its tools in the digital and creative procedure of preparing advertising concept. One of the chapters presents changes in media spends towards online and changes of marketing...

  17. Digital technologies in Day-care institutions

    DEFF Research Database (Denmark)

    Schrøder, Vibeke; Søndergaard, Steen

    Digital technologies are gaining an ever increasing access into the activities in Danish and Nordic day-care institutions. The traditional critical viewpoint of technologies as being opposed to the well-being of children is challenged in part by substantial access to digital tools in infant life......, in part by new technologies designed with an intuitive and inviting user interface. In a one-year research project ’Digital tools in day-care-institutions’ (2015) financed by The Danish Agency for Digitisation and The Ministry of Education we have investigated the role of digital technologies in relation...... in performances of dominant cultural ways of acting and thinking. Also, most often the pedagogues’ use of technologies follow the immediate possibilities offered by the technologies. From the videos of these activities it appears that the children follow two tracks of participation. Either the children work...

  18. Human resource management in the delivery of postal items

    Directory of Open Access Journals (Sweden)

    Kujačić Momčilo D.

    2015-01-01

    Full Text Available Delivery of postal items is the last phase in the postal conveyance process. This phase involved up to 57% in total costs of postal items conveyance. In order to reduce the costs of delivery phase, postal organizations apply different methods and techniques. Legal and technological regulations, various restrictions regarding the selection and deployment of employees influence the choice of appropriate methods. Also, the principle of availability of the universal postal service is an essential factor in defining the optimal model. In this paper, the model for assessing and planning of the number of employees in the delivery service observed postal operator has been proposed, with respect to the principles of productivity and accessibility constraints of the universal postal service. This paper will analyze the impact of daily fluctuations in the number of full-time employees and the possibility of hiring a part-time workers in the days with increased traffic volume in the delivery of items, when usually the items from large customers are delivered.

  19. Articulatory Suppression Effects on Short-Term Memory of Signed Digits and Lexical Items in Hearing Bimodal-Bilingual Adults

    Science.gov (United States)

    Liu, Hsiu Tan; Squires, Bonita; Liu, Chun Jung

    2016-01-01

    We can gain a better understanding of short-term memory processes by studying different language codes and modalities. Three experiments were conducted to investigate: (a) Taiwanese Sign Language (TSL) digit spans in Chinese/TSL hearing bilinguals (n = 32); (b) American Sign Language (ASL) digit spans in English/ASL hearing bilinguals (n = 15);…

  20. Safety classification of items in Tianwan Nuclear Power Plant

    International Nuclear Information System (INIS)

    Sun Yongbin

    2005-01-01

    The principle of integrality, moderation and equilibrium should be considered in the safety classification of items in nuclear power plant. The basic ways for safety classification of items is to classify the safety function based on the effect of the outside enclosure damage of the items (parts) on the safety. Tianwan Nuclear Power Plant adopts Russian VVER-1000/428 type reactor, it safety classification mainly refers to Russian Guidelines and standards. The safety classification of the electric equipment refers to IEEE-308(80) standard, including 1E and Non 1E classification. The safety classification of the instrumentation and control equipment refers to GB/T 15474-1995 standard, including safety 1E, safety-related SR and NC non-safety classification. The safety classification of Tianwan Nuclear Power Plant has to be approved by NNSA and satisfy Chinese Nuclear Safety Guidelines. (authors)

  1. Suspect/Counterfeit Items Information Guide for Subcontractors/Suppliers

    Energy Technology Data Exchange (ETDEWEB)

    Tessmar, Nancy D. [Los Alamos National Laboratory; Salazar, Michael J. [Los Alamos National Laboratory

    2012-09-18

    Counterfeiting of industrial and commercial grade items is an international problem that places worker safety, program objectives, expensive equipment, and security at risk. In order to prevent the introduction of Suspect/Counterfeit Items (S/CI), this information sheet is being made available as a guide to assist in the implementation of S/CI awareness and controls, in conjunction with subcontractor's/supplier's quality assurance programs. When it comes to counterfeit goods, including industrial materials, items, and equipment, no market is immune. Some manufactures have been known to misrepresent their products and intentionally use inferior materials and processes to manufacture substandard items, whose properties can significantly cart from established standards and specifications. These substandard items termed by the Department of Energy (DOE) as S/CI, pose immediate and potential threats to the safety of DOE and contractor workers, the public, and the environment. Failure of certain systems and processes caused by an S/CI could also have national security implications at Los Alamos National Laboratory (LANL). Nuclear Safety Rules (federal Laws), DOE Orders, and other regulations set forth requirements for DOE contractors to implement effective controls to assure that items and services meet specified requirements. This includes techniques to implement and thereby minimizing the potential threat of entry of S/CI to LANL. As a qualified supplier of goods or services to the LANL, your company will be required to establish and maintain effective controls to prevent the introduction of S/CI to LANL. This will require that your company warrant that all items (including their subassemblies, components, and parts) sold to LANL are genuine (i.e. not counterfeit), new, and unused, and conform to the requirements of the LANL purchase orders/contracts unless otherwise approved in writing to the Los Alamos National Security (LANS) contract administrator

  2. Road Tripping down the Digital Preservation Highway, Part I: Hitting the Road

    Science.gov (United States)

    Colati, Jessica Branco; Colati, Gregory C.

    2011-01-01

    In this inaugural column, the authors introduce Peter Palmer, erstwhile librarian at Bellaluna University who is being tasked with managing the library's and university's digital content as he begins his journey down the Digital Highway. As head of access services at Bellaluna University, Peter had been, by default, made responsible for managing…

  3. Evaluating the quality of medical multiple-choice items created with automated processes.

    Science.gov (United States)

    Gierl, Mark J; Lai, Hollis

    2013-07-01

    Computerised assessment raises formidable challenges because it requires large numbers of test items. Automatic item generation (AIG) can help address this test development problem because it yields large numbers of new items both quickly and efficiently. To date, however, the quality of the items produced using a generative approach has not been evaluated. The purpose of this study was to determine whether automatic processes yield items that meet standards of quality that are appropriate for medical testing. Quality was evaluated firstly by subjecting items created using both AIG and traditional processes to rating by a four-member expert medical panel using indicators of multiple-choice item quality, and secondly by asking the panellists to identify which items were developed using AIG in a blind review. Fifteen items from the domain of therapeutics were created in three different experimental test development conditions. The first 15 items were created by content specialists using traditional test development methods (Group 1 Traditional). The second 15 items were created by the same content specialists using AIG methods (Group 1 AIG). The third 15 items were created by a new group of content specialists using traditional methods (Group 2 Traditional). These 45 items were then evaluated for quality by a four-member panel of medical experts and were subsequently categorised as either Traditional or AIG items. Three outcomes were reported: (i) the items produced using traditional and AIG processes were comparable on seven of eight indicators of multiple-choice item quality; (ii) AIG items can be differentiated from Traditional items by the quality of their distractors, and (iii) the overall predictive accuracy of the four expert medical panellists was 42%. Items generated by AIG methods are, for the most part, equivalent to traditionally developed items from the perspective of expert medical reviewers. While the AIG method produced comparatively fewer plausible

  4. Digital Sensor Technology

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, Ken D. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Quinn, Edward L. [Technology Resources, Dana Point, CA (United States); Mauck, Jerry L. [Technology Resources, Dana Point, CA (United States); Bockhorst, Richard M. [Technology Resources, Dana Point, CA (United States)

    2015-02-01

    The nuclear industry has been slow to incorporate digital sensor technology into nuclear plant designs due to concerns with digital qualification issues. However, the benefits of digital sensor technology for nuclear plant instrumentation are substantial in terms of accuracy and reliability. This paper, which refers to a final report issued in 2013, demonstrates these benefits in direct comparisons of digital and analog sensor applications. Improved accuracy results from the superior operating characteristics of digital sensors. These include improvements in sensor accuracy and drift and other related parameters which reduce total loop uncertainty and thereby increase safety and operating margins. An example instrument loop uncertainty calculation for a pressure sensor application is presented to illustrate these improvements. This is a side-by-side comparison of the instrument loop uncertainty for both an analog and a digital sensor in the same pressure measurement application. Similarly, improved sensor reliability is illustrated with a sample calculation for determining the probability of failure on demand, an industry standard reliability measure. This looks at equivalent analog and digital temperature sensors to draw the comparison. The results confirm substantial reliability improvement with the digital sensor, due in large part to ability to continuously monitor the health of a digital sensor such that problems can be immediately identified and corrected. This greatly reduces the likelihood of a latent failure condition of the sensor at the time of a design basis event. Notwithstanding the benefits of digital sensors, there are certain qualification issues that are inherent with digital technology and these are described in the report. One major qualification impediment for digital sensor implementation is software common cause failure (SCCF).

  5. Cultural Interchangeability? Culture-Specific Items in Translation

    Directory of Open Access Journals (Sweden)

    Ajtony Zsuzsanna

    2016-12-01

    Full Text Available This paper summarizes the results of the translation work carried out within an international project aiming to develop the language skills of staff working in hotel and catering services. As the topics touched upon in the English source texts are related to several European cultures, these cultural differences bring about several challenges related to the translation of realia, or culture-specific items (CSIs. In the first part of the paper, a series of translation strategies for rendering source-language CSIs into the target language are enlisted, while the second part presents the main strategies employed in the prepared translations.

  6. Benthic marine debris, with an emphasis on fishery-related items, surrounding Kodiak Island, Alaska, 1994-1996

    Science.gov (United States)

    Hess, N.A.; Ribic, C.A.; Vining, I.

    1999-01-01

    Composition and abundance of benthic marine debris were investigated during three bottom trawl surveys in inlet and offshore locations surrounding Kodiak Island, Alaska, 1994-1996. Debris items were primarily plastic and metal regardless of trawl location. Plastic bait jars, fishing line, and crab pots were the most common fishery-related debris items and were encountered in large amounts in inlets (20-25 items km-2), but were less abundant outside of inlets (4.5-11 items km-2). Overall density of debris was also significantly greater in inlets than outside of inlets. Plastic debris densities in inlets ranged 22-31.5 items km-2, 7.8-18.8 items km-2 outside of inlets. Trawls in inlets contained almost as much metal debris as plastic debris. Density of metal debris ranged from 21.2 to 23.7 items km-2 in inlets, a maximum of 2.7 items km-2 outside of inlets. Inlets around the town of Kodiak had the highest densities of fishery-related and total benthic debris. Differences in benthic debris density between inlets and outside of inlets and differences by area may be due to differences in fishing activity and water circulation patterns. At the current reduced levels of fishing activity, however, yearly monitoring of benthic debris appears unnecessary. Copyright (C) 1999.

  7. Towards Ways to Promote Interaction in Digital Learning Spaces

    OpenAIRE

    Olsson , Hanna ,

    2012-01-01

    Part 7: Doctoral Student Papers; International audience; Social learning is dependent on social interactions. I am exploring ways to promote interaction in Digital Learning Spaces. As theoretical framework I use the types of interaction between learner, instructor and content. That learners feel isolated and lonely in DLSs is a problem which comes at high cost for social learning. My aim is to promote social interaction by offering the edentity: a system for making participants visible to eac...

  8. 77 FR 13624 - Notice of Intent To Repatriate Cultural Items: U.S. Fish and Wildlife Service, Office of Law...

    Science.gov (United States)

    2012-03-07

    ... Service is not responsible for the determinations in this notice. History and Description of the Cultural...; Items 7 and 12: eagle bone whistle; Item 15: dance club; Item 16: dance staff; Items 23-25: replica... feather headdress; Item 65: medicine bundle; and Item 69: leather tipi bag and contents. Item 16 (dance...

  9. Summary of the preparation of methodology for digital system reliability analysis for PSA purposes

    International Nuclear Information System (INIS)

    Hustak, S.; Babic, P.

    2001-12-01

    The report is structured as follows: Specific features of and requirements for the digital part of NPP Instrumentation and Control (I and C) systems (Computer-controlled digital technologies and systems of the NPP I and C system; Specific types of digital technology failures and preventive provisions; Reliability requirements for the digital parts of I and C systems; Safety requirements for the digital parts of I and C systems; Defence-in-depth). Qualitative analyses of NPP I and C system reliability and safety (Introductory system analysis; Qualitative requirements for and proof of NPP I and C system reliability and safety). Quantitative reliability analyses of the digital parts of I and C systems (Selection of a suitable quantitative measure of digital system reliability; Selected qualitative and quantitative findings regarding digital system reliability; Use of relations among the occurrences of the various types of failure). Mathematical section in support of the calculation of the various types of indices (Boolean reliability models, Markovian reliability models). Example of digital system analysis (Description of a selected protective function and the relevant digital part of the I and C system; Functional chain examined, its components and fault tree). (P.A.)

  10. The Effect of the Existence of Defective Items in Assembly Operations

    OpenAIRE

    Eben-Chaime , Moshe

    2014-01-01

    Part 1: Knowledge-Based Performance Improvement; International audience; Quality is a principle issue in production management (PM). No process is perfect and the production of defective items is unavoidable. Very few studies regard the effect of the existence of defective items (EEDI) in production processes. Further, quality has been studied in isolation to high extent, of other PM domains. In this study, defect rates together with the assembly ratios of the bill of material are embedded in...

  11. Relationship between the non-motor items of the MDS-UPDRS and Quality of Life in patients with Parkinson's disease.

    Science.gov (United States)

    Skorvanek, Matej; Rosenberger, Jaroslav; Minar, Michal; Grofik, Milan; Han, Vladimir; Groothoff, Johan W; Valkovic, Peter; Gdovinova, Zuzana; van Dijk, Jitse P

    2015-01-01

    The Movement Disorder Society-Unified Parkinson's Disease Rating Scale (MDS-UPDRS) is a newly developed comprehensive tool to assess Parkinson's disease (PD), which covers a wider range of non-motor PD manifestations than the original UPDRS scale. The aim of this study was to assess the relationship between the MDS-UPDRS and Quality of Life (QoL) and to analyze the relationship between individual MDS-UPDRS non-motor items and QoL. A total of 291 PD patients were examined in a multicenter Slovak study. Patients were assessed by the MDS-UPDRS, HY scale and PDQ39. Data were analyzed using the multiple regression analyses. The mean participant age was 68.0 ± 9.0 years, 53.5% were men, mean disease duration was 8.3 ± 5.3 years and mean HY was 2.7 ± 1.0. In a multiple regression analysis model the PDQ39 summary index was related to MDS-UPDRS parts II, I and IV respectively, but not to part III. Individual MDS-UPDRS non-motor items related to the PDQ39 summary index in the summary group and in the non-fluctuating patients subgroup were pain, fatigue and features of dopamine dysregulation syndrome (DDS). In the fluctuating PD patient subgroup, PDQ39 was related to pain and Depressed mood items. Other MDS-UPDRS non-motor items e.g. Anxious mood, Apathy, Cognitive impairment, Hallucinations and psychosis, Sleep problems, Daytime sleepiness and Urinary problems were related to some PDQ39 domains. The overall burden of NMS in PD is more important in terms of QoL than motor symptoms. Individual MDS-UPDRS non-motor items related to worse QoL are especially pain and other sensations, fatigue and features of DDS. Copyright © 2015 Elsevier B.V. All rights reserved.

  12. RF applications in digital signal processing

    CERN Document Server

    Schilcher, T

    2008-01-01

    Ever higher demands for stability, accuracy, reproducibility, and monitoring capability are being placed on Low-Level Radio Frequency (LLRF) systems of particle accelerators. Meanwhile, continuing rapid advances in digital signal processing technology are being exploited to meet these demands, thus leading to development of digital LLRF systems. The rst part of this course will begin by focusing on some of the important building-blocks of RF signal processing including mixer theory and down-conversion, I/Q (amplitude and phase) detection, digital down-conversion (DDC) and decimation, concluding with a survey of I/Q modulators. The second part of the course will introduce basic concepts of feedback systems, including examples of digital cavity eld and phase control, followed by radial loop architectures. Adaptive feed-forward systems used for the suppression of repetitive beam disturbances will be examined. Finally, applications and principles of system identi cation approaches will be summarized.

  13. [The safety data sheets of the paint and coatings sector: analysis of the items of most interest to health and safety in the workplace].

    Science.gov (United States)

    Boniardi, Luca; Canti, Zulejka; Cantoni, Susanna; Fustinoni, Silvia

    2014-07-15

    The interlinked REACH-CLP regulations promote the sharing of knowledge regarding the risks and hazards of chemicals throughout the supply chain. The safety data sheet (SDS) is the main instrument to achieve this goal. to study 100 SDS of paints and coatings sector in order to highlight major criticisms related to health and safety of workers. Using the criteria prescribed by Regulation 453/2010/EC and preparing a suitable check list, some items of the sections 1 "Identification of the substance/mixture and of the company", 2 "Hazards identification", 3 "Composition/information on ingredients", the first part of section 7 "Precautions for safe handling", sections 8 "Exposure controls/personal protection" and 16 "Other information", were therefore evaluated for their appropriateness. Seven SDS were written in a foreign language and were excluded from further analysis. Of the remaining 93 SDS, only 23% had a proportion of adequate items greater than 80%, 49 % had adequate items between 60 and 80%, and 28% had less than 60% adequate items. The most critical sections were those relating to workers' safe handling and exposure controls and protection. In conclusion, from the analysis of SDS we found high percentages of inadequacy, especially in sections 7 and 8, the most relevant for the protection of the health and safety of workers.

  14. Differential item functioning magnitude and impact measures from item response theory models.

    Science.gov (United States)

    Kleinman, Marjorie; Teresi, Jeanne A

    2016-01-01

    Measures of magnitude and impact of differential item functioning (DIF) at the item and scale level, respectively are presented and reviewed in this paper. Most measures are based on item response theory models. Magnitude refers to item level effect sizes, whereas impact refers to differences between groups at the scale score level. Reviewed are magnitude measures based on group differences in the expected item scores and impact measures based on differences in the expected scale scores. The similarities among these indices are demonstrated. Various software packages are described that provide magnitude and impact measures, and new software presented that computes all of the available statistics conveniently in one program with explanations of their relationships to one another.

  15. ITEM LEVEL DIAGNOSTICS AND MODEL - DATA FIT IN ITEM ...

    African Journals Online (AJOL)

    Global Journal

    Item response theory (IRT) is a framework for modeling and analyzing item response ... data. Though, there is an argument that the evaluation of fit in IRT modeling has been ... National Council on Measurement in Education ... model data fit should be based on three types of ... prediction should be assessed through the.

  16. Digital imaging primer

    CERN Document Server

    Parkin, Alan

    2016-01-01

    Digital Imaging targets everyyone with an interest in digital imaging, be they professional or private, who uses even quite modest equipment such as a PC, digital camera and scanner, a graphics editor such as Paint, and an inkjet printer. Uniquely, it is intended to fill the gap between highly technical texts for academics (with access to expensive equipment) and superficial introductions for amateurs. The four-part treatment spans theory, technology, programs and practice. Theory covers integer arithmetic, additive and subtractive color, greyscales, computational geometry, and a new presentation of discrete Fourier analysis; Technology considers bitmap file structures, scanners, digital cameras, graphic editors, and inkjet printers; Programs develops several processing tools for use in conjunction with a standard Paint graphics editor and supplementary processing tools; Practice discusses 1-bit, greyscale, 4-bit, 8-bit, and 24-bit images for the practice section. Relevant QBASIC code is supplied an accompa...

  17. A survey of anatomical items relevant to the practice of rheumatology: upper extremity, head, neck, spine, and general concepts.

    Science.gov (United States)

    Villaseñor-Ovies, Pablo; Navarro-Zarza, José Eduardo; Saavedra, Miguel Ángel; Hernández-Díaz, Cristina; Canoso, Juan J; Biundo, Joseph J; Kalish, Robert A; de Toro Santos, Francisco Javier; McGonagle, Dennis; Carette, Simon; Alvarez-Nemegyei, José

    2016-12-01

    This study aimed to identify the anatomical items of the upper extremity and spine that are potentially relevant to the practice of rheumatology. Ten rheumatologists interested in clinical anatomy who published, taught, and/or participated as active members of Clinical Anatomy Interest groups (six seniors, four juniors), participated in a one-round relevance Delphi exercise. An initial, 560-item list that included 45 (8.0 %) general concepts items; 138 (24.8 %) hand items; 100 (17.8 %) forearm and elbow items; 147 (26.2 %) shoulder items; and 130 (23.2 %) head, neck, and spine items was compiled by 5 of the participants. Each item was graded for importance with a Likert scale from 1 (not important) to 5 (very important). Thus, scores could range from 10 (1 × 10) to 50 (5 × 10). An item score of ≥40 was considered most relevant to competent practice as a rheumatologist. Mean item Likert scores ranged from 2.2 ± 0.5 to 4.6 ± 0.7. A total of 115 (20.5 %) of the 560 initial items reached relevance. Broken down by categories, this final relevant item list was composed by 7 (6.1 %) general concepts items; 32 (27.8 %) hand items; 20 (17.4 %) forearm and elbow items; 33 (28.7 %) shoulder items; and 23 (17.6 %) head, neck, and spine items. In this Delphi exercise, a group of practicing academic rheumatologists with an interest in clinical anatomy compiled a list of anatomical items that were deemed important to the practice of rheumatology. We suggest these items be considered curricular priorities when training rheumatology fellows in clinical anatomy skills and in programs of continuing rheumatology education.

  18. Digital vs conventional radiography: cost and revenue analysis

    International Nuclear Information System (INIS)

    Dalla Palma, L.; Cuttin, R.; Rimondini, A.; Grisi, G.

    1999-01-01

    The objective of this study was to analyse and compare the operating and investment costs of two radiographic systems, a conventional and a digital one, and to evaluate the cost/revenue ratio of the two systems. The radiological activity over 1 year for chest and skeletal exams was evaluated: 13,401 chest and 7,124 skeletal exams were considered. The following parameters of variable costs were evaluated: the difference between variable proportional costs of the two technologies, the effective variable cost of any size film, including the chemicals, and for different sizes of digital film, variable costs of chest plus skeletal exams performed with the two techniques. Afterwards the economical effect was considered taking into account depreciation during a time of utilization ranging between 8 and 4 years. In the second part of the analysis the total cost and the revenues of the two technologies were determined. The comparison between the digital and conventional systems has shown the following aspects: 1. Digital radiography system has a much higher investment cost in comparison with the conventional one. 2. Operating costs of digital equipment are higher or lower depending on the film size used. Evaluating chest X-ray we reach a breakeven point after 1 year and 10,000 exams only if displayed over 8 x 10-in. film and after 30,000 if displayed over a 11 x 14-in. film. 3. The total cost (variable cost, technology cost, labour cost) of digital technology is lower than that of the conventional system by 20 % on average using 8 x 10-in. film size. 4. Digital technology also allows lesser film waste and lesser film per exam (orig.)

  19. Item calibration in incomplete testing designs

    Directory of Open Access Journals (Sweden)

    Norman D. Verhelst

    2011-01-01

    Full Text Available This study discusses the justifiability of item parameter estimation in incomplete testing designs in item response theory. Marginal maximum likelihood (MML as well as conditional maximum likelihood (CML procedures are considered in three commonly used incomplete designs: random incomplete, multistage testing and targeted testing designs. Mislevy and Sheenan (1989 have shown that in incomplete designs the justifiability of MML can be deduced from Rubin's (1976 general theory on inference in the presence of missing data. Their results are recapitulated and extended for more situations. In this study it is shown that for CML estimation the justification must be established in an alternative way, by considering the neglected part of the complete likelihood. The problems with incomplete designs are not generally recognized in practical situations. This is due to the stochastic nature of the incomplete designs which is not taken into account in standard computer algorithms. For that reason, incorrect uses of standard MML- and CML-algorithms are discussed.

  20. IRT-Estimated Reliability for Tests Containing Mixed Item Formats

    Science.gov (United States)

    Shu, Lianghua; Schwarz, Richard D.

    2014-01-01

    As a global measure of precision, item response theory (IRT) estimated reliability is derived for four coefficients (Cronbach's a, Feldt-Raju, stratified a, and marginal reliability). Models with different underlying assumptions concerning test-part similarity are discussed. A detailed computational example is presented for the targeted…

  1. Measuring outcomes in allergic rhinitis: psychometric characteristics of a Spanish version of the congestion quantifier seven-item test (CQ7

    Directory of Open Access Journals (Sweden)

    Mullol Joaquim

    2011-03-01

    Full Text Available Abstract Background No control tools for nasal congestion (NC are currently available in Spanish. This study aimed to adapt and validate the Congestion Quantifier Seven Item Test (CQ7 for Spain. Methods CQ7 was adapted from English following international guidelines. The instrument was validated in an observational, prospective study in allergic rhinitis patients with NC (N = 166 and a control group without NC (N = 35. Participants completed the CQ7, MOS sleep questionnaire, and a measure of psychological well-being (PGWBI. Clinical data included NC severity rating, acoustic rhinometry, and total symptom score (TSS. Internal consistency was assessed using Cronbach's alpha and test-retest reliability using the intraclass correlation coefficient (ICC. Construct validity was tested by examining correlations with other outcome measures and ability to discriminate between groups classified by NC severity. Sensitivity and specificity were assessed using Area under the Receiver Operating Curve (AUC and responsiveness over time using effect sizes (ES. Results Cronbach's alpha for the CQ7 was 0.92, and the ICC was 0.81, indicating good reliability. CQ7 correlated most strongly with the TSS (r = 0.60, p Conclusions The Spanish version of the CQ7 is appropriate for detecting, measuring, and monitoring NC in allergic rhinitis patients.

  2. An Overview of the Asynchronous Digital Systems – Part 3

    Directory of Open Access Journals (Sweden)

    Mihai Timis

    2008-01-01

    Full Text Available Implementation methods for the digital asynchronous systems use different predefined models like self timed circuits, speed independent circuits, delay insensitive circuits, handshake protocol implementation in asynchronous systems,C Muller circuits.

  3. An Overview of the Asynchronous Digital Systems – Part 2

    Directory of Open Access Journals (Sweden)

    Mihai Timis

    2008-01-01

    Full Text Available Implementation methods for the digital asynchronous systems use different predefined models like self timed circuits, speed independent circuits, delay insensitive circuits, handshake protocol implementation in asynchronous systems,C Muller circuits.

  4. Developing and testing items for the South African Personality Inventory (SAPI

    Directory of Open Access Journals (Sweden)

    Carin Hill

    2013-11-01

    Research purpose: This article reports on the process of identifying items for, and provides a quantitative evaluation of, the South African Personality Inventory (SAPI items. Motivation for the study: The study intended to develop an indigenous and psychometrically sound personality instrument that adheres to the requirements of South African legislation and excludes cultural bias. Research design, approach and method: The authors used a cross-sectional design. They measured the nine SAPI clusters identified in the qualitative stage of the SAPI project in 11 separate quantitative studies. Convenience sampling yielded 6735 participants. Statistical analysis focused on the construct validity and reliability of items. The authors eliminated items that showed poor performance, based on common psychometric criteria, and selected the best performing items to form part of the final version of the SAPI. Main findings: The authors developed 2573 items from the nine SAPI clusters. Of these, 2268 items were valid and reliable representations of the SAPI facets. Practical/managerial implications: The authors developed a large item pool. It measures personality in South Africa. Researchers can refine it for the SAPI. Furthermore, the project illustrates an approach that researchers can use in projects that aim to develop culturally-informed psychological measures. Contribution/value-add: Personality assessment is important for recruiting, selecting and developing employees. This study contributes to the current knowledge about the early processes researchers follow when they develop a personality instrument that measures personality fairly in different cultural groups, as the SAPI does.

  5. Selection of material balance areas and item control areas

    International Nuclear Information System (INIS)

    1975-04-01

    Section 70.58, ''Fundamental Nuclear Material Controls,'' of 10 CFR Part 70, ''Special Nuclear Material,'' requires certain licensees authorized to possess more than one effective kilogram of special nuclear material to establish Material Balance Areas (MBAs) or Item Control Areas (ICAs) for the physical and administrative control of nuclear materials. This section requires that: (1) each MBA be an identifiable physical area such that the quantity of nuclear material being moved into or out of the MBA is represented by a measured value; (2) the number of MBAs be sufficient to localize nuclear material losses or thefts and identify the mechanisms; (3) the custody of all nuclear material within an MBA or ICA be the responsibility of a single designated individual; and (4) ICAs be established according to the same criteria as MBAs except that control into and out of such areas would be by item identity and count for previously determined special nuclear material quantities, the validity of which must be ensured by tamper-safing unless the items are sealed sources. This guide describes bases acceptable to the NRC staff for the selection of material balance areas and item control areas. (U.S.)

  6. Decree of the State Office for Nuclear Safety No. 147/1997 of 17 June 1997 specifying lists of selected nuclear-related items and dual-use nuclear-related items

    International Nuclear Information System (INIS)

    1997-01-01

    The core of the Decree consists of 2 lists, viz (a) the List of Selected Items (selected nuclear-related materials, equipment and technologies) which are subject to control regimes during imports, exports and transit; and (b) the List of Dual-Use Items (dual-use nuclear-related materials, equipment and technologies) which are subject to control regimes during imports and exports. Both Lists are based on the IAEA document INFCIRC/254/Rev.2/Part 2/Mod.1. (P.A.)

  7. Evolution of a Test Item

    Science.gov (United States)

    Spaan, Mary

    2007-01-01

    This article follows the development of test items (see "Language Assessment Quarterly", Volume 3 Issue 1, pp. 71-79 for the article "Test and Item Specifications Development"), beginning with a review of test and item specifications, then proceeding to writing and editing of items, pretesting and analysis, and finally selection of an item for a…

  8. A Semiotic Reading of Digital Avatars and Their Role of Uncertainty Reduction in Digital Communication

    Directory of Open Access Journals (Sweden)

    Sercan Şengün

    2014-12-01

    Full Text Available This study tries to explain the role of digital avatars for communication in two distinct ways. In the first part it debates what kinds of meanings avatars have for their users. To answer this question based on semiotic theories of Saussure and Lacan, a new approach will be proposed. Saussure’s theory of signs and Lacan’s theory of chain of signifiers as an entry for self, will be merged to form a new viewpoint. In the second part, the role of avatars in the digital communication for the receivers will be approached by Berger’s uncertainty reduction theory.

  9. Investigation of initial contamination for disposal medical infusion items and determination of sterilization dose

    International Nuclear Information System (INIS)

    Hu Jinhui; Xu Ziyan; Sun Naifeng; Yan Aoshuang; Gao Wei; Wang Binglin

    1993-01-01

    Statistical analyses on initial contamination of 624 disposal medical infusion items are made. The normal distribution of the initial contamination, the relation of initial contamination of inner and outer walls of disposal medical infusion items and the changes of initial contamination before irradiation are shown. The sterilized dose for disposal infusion is determined as 17.2 kGy using bioburden information. The SAL (sterility assurance level) dose is 10 6 . The SIP (device sample item proportion) is 1 and the average initial contamination is 7 CFU/item

  10. Differential Item Functioning Analysis of the Mental, Emotional, and Bodily Toughness Inventory

    Science.gov (United States)

    Gao, Yong; Mack, Mick G.; Ragan, Moira A.; Ragan, Brian

    2012-01-01

    In this study the authors used differential item functioning analysis to examine if there were items in the Mental, Emotional, and Bodily Toughness Inventory functioning differently across gender and athletic membership. A total of 444 male (56.3%) and female (43.7%) participants (30.9% athletes and 69.1% non-athletes) responded to the Mental,…

  11. Digital soil mapping with limited data

    NARCIS (Netherlands)

    Hartemink, A.E.; McBratney, A.B.; Lourdes Mendonça-Santos, de M.

    2008-01-01

    There has been considerable expansion in the use of digital soil mapping technologies and development of methodologies that improve digital soil mapping at all scales and levels of resolution. These developments have occurred in all parts of the world in the past few years and also in countries

  12. Feasibility of digital imaging to characterize earth materials : part 1.

    Science.gov (United States)

    2012-06-06

    This study demonstrated the feasibility of digital imaging to characterize earth materials. Two rapid, relatively low cost image-based methods were developed for determining the grain size distribution of soils and aggregates. The first method, calle...

  13. Feasibility of digital imaging to characterize earth materials : part 4.

    Science.gov (United States)

    2012-06-06

    This study demonstrated the feasibility of digital imaging to characterize earth materials. Two rapid, relatively low cost image-based methods were developed for determining the grain size distribution of soils and aggregates. The first method, calle...

  14. Feasibility of digital imaging to characterize earth materials : part 5.

    Science.gov (United States)

    2012-05-06

    This study demonstrated the feasibility of digital imaging to characterize earth materials. Two rapid, relatively low cost image-based methods were developed for determining the grain size distribution of soils and aggregates. The first method, calle...

  15. Feasibility of digital imaging to characterize earth materials : part 3.

    Science.gov (United States)

    2012-06-06

    This study demonstrated the feasibility of digital imaging to characterize earth materials. Two rapid, relatively low cost image-based methods were developed for determining the grain size distribution of soils and aggregates. The first method, calle...

  16. Feasibility of digital imaging to characterize earth materials : part 2.

    Science.gov (United States)

    2012-06-06

    This study demonstrated the feasibility of digital imaging to characterize earth materials. Two rapid, relatively low cost image-based methods were developed for determining the grain size distribution of soils and aggregates. The first method, calle...

  17. Feasibility of digital imaging to characterize earth materials : part 6.

    Science.gov (United States)

    2012-06-06

    This study demonstrated the feasibility of digital imaging to characterize earth materials. Two rapid, relatively low cost image-based methods were developed for determining the grain size distribution of soils and aggregates. The first method, calle...

  18. Within-item strategy switching in arithmetic: a comparative study in children

    Science.gov (United States)

    Ardiale, Eléonore; Lemaire, Patrick

    2013-01-01

    The present study aimed at determining whether (1) children were able to interrupt a strategy execution to switch and choose another better strategy, and (2) their ability to switch strategy within-item improved with age. Third, fifth, and seventh graders performed a computational estimation task in which they had to provide the better estimates to two-digit addition problems (e.g., 32 + 54) while using the rounding-down (e.g., 30 + 50) or the rounding-up strategy (e.g., 40 + 60). After having executing the cued strategy (e.g., 30 + 50) during 1,000 ms, participants were given the opportunity to switch to another better strategy (e.g., 40 + 60) or to repeat the same strategy (e.g., 30 + 50). The results showed that children switched strategies within items, and were able to switch more often when the addition problems were cued with the poorer strategy (e.g., 40 + 60 for 32 + 54) than when cued with the better strategy (e.g., 30 + 50). As they grew up, children based their decisions to switch strategies more often on whether the 1,000-ms strategy execution concerned the better strategy or strategy difficulty (i.e., the rounding-up strategy). These findings have important implications to further understand mechanisms underlying within-item strategy switching as well as strategic variations in children. PMID:24368906

  19. Automatic Generation of Mashups for Personalized Commerce in Digital TV by Semantic Reasoning

    Science.gov (United States)

    Blanco-Fernández, Yolanda; López-Nores, Martín; Pazos-Arias, José J.; Martín-Vicente, Manuela I.

    The evolution of information technologies is consolidating recommender systems as essential tools in e-commerce. To date, these systems have focused on discovering the items that best match the preferences, interests and needs of individual users, to end up listing those items by decreasing relevance in some menus. In this paper, we propose extending the current scope of recommender systems to better support trading activities, by automatically generating interactive applications that provide the users with personalized commercial functionalities related to the selected items. We explore this idea in the context of Digital TV advertising, with a system that brings together semantic reasoning techniques and new architectural solutions for web services and mashups.

  20. An alternative method for noise analysis using pixel variance as part of quality control procedures on digital mammography systems

    International Nuclear Information System (INIS)

    Bouwman, R; Broeders, M; Van Engen, R; Young, K; Lazzari, B; Ravaglia, V

    2009-01-01

    According to the European Guidelines for quality assured breast cancer screening and diagnosis, noise analysis is one of the measurements that needs to be performed as part of quality control procedures on digital mammography systems. However, the method recommended in the European Guidelines does not discriminate sufficiently between systems with and without additional noise besides quantum noise. This paper attempts to give an alternative and relatively simple method for noise analysis which can divide noise into electronic noise, structured noise and quantum noise. Quantum noise needs to be the dominant noise source in clinical images for optimal performance of a digital mammography system, and therefore the amount of electronic and structured noise should be minimal. For several digital mammography systems, the noise was separated into components based on the measured pixel value, standard deviation (SD) of the image and the detector entrance dose. The results showed that differences between systems exist. Our findings confirm that the proposed method is able to discriminate systems based on their noise performance and is able to detect possible quality problems. Therefore, we suggest to replace the current method for noise analysis as described in the European Guidelines by the alternative method described in this paper.

  1. Item-Level Psychometrics of the Glasgow Outcome Scale: Extended Structured Interviews.

    Science.gov (United States)

    Hong, Ickpyo; Li, Chih-Ying; Velozo, Craig A

    2016-04-01

    The Glasgow Outcome Scale-Extended (GOSE) structured interview captures critical components of activities and participation, including home, shopping, work, leisure, and family/friend relationships. Eighty-nine community dwelling adults with mild-moderate traumatic brain injury (TBI) were recruited (average = 2.7 year post injury). Nine items of the 19 items were used for the psychometrics analysis purpose. Factor analysis and item-level psychometrics were investigated using the Rasch partial-credit model. Although the principal components analysis of residuals suggests that a single measurement factor dominates the measure, the instrument did not meet the factor analysis criteria. Five items met the rating scale criteria. Eight items fit the Rasch model. The instrument demonstrated low person reliability (0.63), low person strata (2.07), and a slight ceiling effect. The GOSE demonstrated limitations in precisely measuring activities/participation for individuals after TBI. Future studies should examine the impact of the low precision of the GOSE on effect size. © The Author(s) 2016.

  2. Incidental learning during rapid information processing on the symbol-digit modalities test.

    Science.gov (United States)

    Denney, Douglas R; Hughes, Abbey J; Elliott, Jacquelyn K; Roth, Alexandra K; Lynch, Sharon G

    2015-06-01

    The Symbol--Digit Modalities Test (SDMT) is widely used to assess processing speed in MS patients. We developed a computerized version of the SDMT (c-SDMT) that scored participants' performance during subintervals over the course of the usual 90-s time period and also added an incidental learning test (c-ILT) to assess how well participants learned the symbol-digit associations while completing the c-SDMT. Patients with MS (n = 65) achieved lower scores than healthy controls (n = 38) on both the c-SDMT and c-ILT, and the scores on the two tests were correlated. However, no increase in the rate of item completion occurred for either group over the course of the c-SDMT, and the difference between groups was the same during each subinterval. Therefore, it seems implausible that controls completed more items on the c-SDMT because they were more adept at learning the symbol-digit associations as the test ensued. Instead, MS patients' poorer incidental learning performance appears to reflect the greater attentional burden that tasks requiring rapid serial processing of information impose upon them. © The Author 2015. Published by Oxford University Press. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  3. Digital Amsterdam : Digital Art and Public Space in Amsterdam

    NARCIS (Netherlands)

    Cnossen, Boukje; Franssen, Thomas; De Wilde, Mandy

    2015-01-01

    In this report we explore digital art interventions in public space in Amsterdam as part of the ‘participatory public space’ project lead by the University of Melbourne. We focus specifically on artistic interventions in public space, rather than on the more general ways in which public space is

  4. Gender and Socioeconomic Status DIF on The WISC-IV Turkish Form Items: A Comparison of DIF Detection Tecniques

    Directory of Open Access Journals (Sweden)

    Elif Bengi ÜNSAL ÖZBERK

    2017-03-01

    Full Text Available The purpose of this study is to investigate potential gender and socio-economic status bias in theWechler Intelligence Scale for Children: Fourth Edition (WISC-4 by using several differential item functioning detection techniques. In this study, WISC-4 Turkish standardization test pilot data including 817 children were used. In accordance with the purpose of the study, 315 items were used both in polytomously scored subtests such as Block Design, Similarities, Digit Span, Vocabulary, Letter-Number Sequencing, Comprehension, and dichotomously scored subtests such as Picture Concepts, Matrix Reasoning, Picture Completion, Information, Arithmetic, and Word Reasoning. While Rasch Model, Mantel-Haenszel, and SIBTEST DIF detection techniques were used for dichotomously scored items, Partila Credit Model, Mantel, and Poly-SIBTEST techniques were used for polytomously scored items. In terms of DIF techniques, Mantel-Haenszel, SIBTEST and Mantel Test, Poly-SIBTEST analyses provided similar results when DIF based on gender was investigated. In addition Mantel-Haenszel, Rasch estimations and Partial Credit Model, Mantel Test results were similar while investigating DIF according to socioeconomic status.

  5. Using Digital Libraries Non-Visually: Understanding the Help-Seeking Situations of Blind Users

    Science.gov (United States)

    Xie, Iris; Babu, Rakesh; Joo, Soohyung; Fuller, Paige

    2015-01-01

    Introduction: This study explores blind users' unique help-seeking situations in interacting with digital libraries. In particular, help-seeking situations were investigated at both the physical and cognitive levels. Method: Fifteen blind participants performed three search tasks, including known- item search, specific information search, and…

  6. Digital Co-production in Archaeology. An editorial

    Directory of Open Access Journals (Sweden)

    Chiara Bonacchi

    2017-12-01

    Full Text Available This special issue focuses on digitally-enabled co-production in archaeology, by bringing together papers that were presented at the session Communication as Collaboration: Digital Methods, Experiences and Values, organised at the 21st Annual Meeting of the European Association of Archaeologists (University of Glasgow, 2015. The session was part of the Communicating Archaeology thematic cluster, which was partly inspired by the first published volume dedicated specifically to the topic of digital public engagement in archaeology (Bonacchi 2012. In that session and in this collection, we have been exploring communication as the collaborative construction of materials and interpretations rather than the dissemination of content at given stages of the archaeological research process (Bonacchi and Moshenska 2015.

  7. Digital health technology and diabetes management.

    Science.gov (United States)

    Cahn, Avivit; Akirov, Amit; Raz, Itamar

    2018-01-01

    Diabetes care is largely dependent on patient self-management and empowerment, given that patients with diabetes must make numerous daily decisions as to what to eat, when to exercise, and determine their insulin dose and timing if required. In addition, patients and providers are generating vast amounts of data from many sources, including electronic medical records, insulin pumps, sensors, glucometers, and other wearables, as well as evolving genomic, proteomic, metabolomics, and microbiomic data. Multiple digital tools and apps have been developed to assist patients to choose wisely, and to enhance their compliance by using motivational tools and incorporating incentives from social media and gaming techniques. Healthcare teams (HCTs) and health administrators benefit from digital developments that sift through the enormous amounts of patient-generated data. Data are acquired, integrated, analyzed, and presented in a self-explanatory manner, highlighting important trends and items that require attention. The use of decision support systems may propose data-driven actions that, for the most, require final approval by the patient or physician before execution and, once implemented, may improve patient outcomes. The digital diabetes clinic aims to incorporate all digital patient data and provide individually tailored virtual or face-to-face visits to those persons who need them most. Digital diabetes care has demonstrated only modest HbA1c reduction in multiple studies and borderline cost-effectiveness, although patient satisfaction appears to be increased. Better understanding of the barriers to digital diabetes care and identification of unmet needs may yield improved utilization of this evolving technology in a safe, effective, and cost-saving manner. © 2017 Ruijin Hospital, Shanghai Jiaotong University School of Medicine and John Wiley & Sons Australia, Ltd.

  8. Instructional Topics in Educational Measurement (ITEMS) Module: Using Automated Processes to Generate Test Items

    Science.gov (United States)

    Gierl, Mark J.; Lai, Hollis

    2013-01-01

    Changes to the design and development of our educational assessments are resulting in the unprecedented demand for a large and continuous supply of content-specific test items. One way to address this growing demand is with automatic item generation (AIG). AIG is the process of using item models to generate test items with the aid of computer…

  9. Strategies for Controlling Item Exposure in Computerized Adaptive Testing with the Generalized Partial Credit Model

    Science.gov (United States)

    Davis, Laurie Laughlin

    2004-01-01

    Choosing a strategy for controlling item exposure has become an integral part of test development for computerized adaptive testing (CAT). This study investigated the performance of six procedures for controlling item exposure in a series of simulated CATs under the generalized partial credit model. In addition to a no-exposure control baseline…

  10. A 67-Item Stress Resilience item bank showing high content validity was developed in a psychosomatic sample.

    Science.gov (United States)

    Obbarius, Nina; Fischer, Felix; Obbarius, Alexander; Nolte, Sandra; Liegl, Gregor; Rose, Matthias

    2018-04-10

    To develop the first item bank to measure Stress Resilience (SR) in clinical populations. Qualitative item development resulted in an initial pool of 131 items covering a broad theoretical SR concept. These items were tested in n=521 patients at a psychosomatic outpatient clinic. Exploratory and Confirmatory Factor Analysis (CFA), as well as other state-of-the-art item analyses and IRT were used for item evaluation and calibration of the final item bank. Out of the initial item pool of 131 items, we excluded 64 items (54 factor loading .3, 2 non-discriminative Item Response Curves, 4 Differential Item Functioning). The final set of 67 items indicated sufficient model fit in CFA and IRT analyses. Additionally, a 10-item short form with high measurement precision (SE≤.32 in a theta range between -1.8 and +1.5) was derived. Both the SR item bank and the SR short form were highly correlated with an existing static legacy tool (Connor-Davidson Resilience Scale). The final SR item bank and 10-item short form showed good psychometric properties. When further validated, they will be ready to be used within a framework of Computer-Adaptive Tests for a comprehensive assessment of the Stress-Construct. Copyright © 2018. Published by Elsevier Inc.

  11. Teoria da Resposta ao Item Teoria de la respuesta al item Item response theory

    Directory of Open Access Journals (Sweden)

    Eutalia Aparecida Candido de Araujo

    2009-12-01

    Full Text Available A preocupação com medidas de traços psicológicos é antiga, sendo que muitos estudos e propostas de métodos foram desenvolvidos no sentido de alcançar este objetivo. Entre os trabalhos propostos, destaca-se a Teoria da Resposta ao Item (TRI que, a princípio, veio completar limitações da Teoria Clássica de Medidas, empregada em larga escala até hoje na medida de traços psicológicos. O ponto principal da TRI é que ela leva em consideração o item particularmente, sem relevar os escores totais; portanto, as conclusões não dependem apenas do teste ou questionário, mas de cada item que o compõe. Este artigo propõe-se a apresentar esta Teoria que revolucionou a teoria de medidas.La preocupación con las medidas de los rasgos psicológicos es antigua y muchos estudios y propuestas de métodos fueron desarrollados para lograr este objetivo. Entre estas propuestas de trabajo se incluye la Teoría de la Respuesta al Ítem (TRI que, en principio, vino a completar las limitaciones de la Teoría Clásica de los Tests, ampliamente utilizada hasta hoy en la medida de los rasgos psicológicos. El punto principal de la TRI es que se tiene en cuenta el punto concreto, sin relevar las puntuaciones totales; por lo tanto, los resultados no sólo dependen de la prueba o cuestionario, sino que de cada ítem que lo compone. En este artículo se propone presentar la Teoría que revolucionó la teoría de medidas.The concern with measures of psychological traits is old and many studies and proposals of methods were developed to achieve this goal. Among these proposed methods highlights the Item Response Theory (IRT that, in principle, came to complete limitations of the Classical Test Theory, which is widely used until nowadays in the measurement of psychological traits. The main point of IRT is that it takes into account the item in particular, not relieving the total scores; therefore, the findings do not only depend on the test or questionnaire

  12. MODELO DE AVALIAÇÃO EM AQUISIÇÃO EM USINA SUCROALCOOLEIRA BASEADO NO ITEM 7.4. DA ISO 9001:2008 / SUGARCANE COMPANY. EVALUATION MODEL: ACQUISITION AND MAN-AGEMENT COMPANY SUPPLIERS BASED ON THE ITEM 7.4 OF ISO 9001:2008

    Directory of Open Access Journals (Sweden)

    A.T.J. GEBARA

    2014-12-01

    Full Text Available O presente artigo tem como objetivo avaliar o cumprimento de exigências e padrões dessa norma, em uma empresa do ramo sucroalcooleiro. Foi conduzido um questionário baseado na norma ISO 9001:2008, item 7.4. em questão, viabilizando conhecer os impactos organizacionais, como melhoria na qualidade e padronização de produtos e processos, maior satisfação de clientes e melhores relações com parceiros. Assim, foi comprovada a existência de critérios de qualificação, que procuram identificar fornecedores que demonstram evidências de atendimento a requisitos especificados, bem como a existência de um modelo de critérios de avaliação de fornecedores, que visa verificar a conformidade, quando comparado a requisitos especificados.

  13. TV Digital Station Transmitters

    Data.gov (United States)

    Department of Homeland Security — This file is an extract from the Consolidated Database System (CDBS) licensed by the Media Bureau. It consists of Digital Television broadcasters (see Rule Part47...

  14. Establishing macroecological trait datasets: digitalization, extrapolation, and validation of diet preferences in terrestrial mammals worldwide

    DEFF Research Database (Denmark)

    Kissling, W. Daniel; Dalby, Lars; Fløjgaard, Camilla

    2014-01-01

    , the importance of diet for macroevolutionary and macroecological dynamics remains little explored, partly because of the lack of comprehensive trait datasets. We compiled and evaluated a comprehensive global dataset of diet preferences of mammals (“MammalDIET”). Diet information was digitized from two global...... species within the same genus, or family) and this extrapolation was subsequently validated both internally (with a jack-knife approach applied to the compiled species-level diet data) and externally (using independent species-level diet information from a comprehensive continentwide data source). Finally...... information (48% of all terrestrial mammal species), and only rarely from other species within the same genus (6%) or from family level (8%). Internal and external validation showed that: (1) extrapolations were most reliable for primary food items; (2) several diet categories (“Animal”, “Mammal...

  15. Interval availability analysis of a two-echelon, multi-item system

    NARCIS (Netherlands)

    Al Hanbali, Ahmad; van der Heijden, Matthijs C.

    2011-01-01

    In this paper we analyze the interval availability of a two-echelon, multi-item spare part inventory system. We consider a scenario inspired by a situation that we encountered at Thales Netherlands, a manufacturer of naval sensors and naval command and control systems. Modeling the complete system

  16. Enacting Students as Digital Experts: Reconfiguring Relations in Teaching

    DEFF Research Database (Denmark)

    Stenbøg, Sofie

    2015-01-01

    Digital Natives’, ‘Net Generation’ or ‘Milliners’ (Prensky 2001, Tapscott 1998, Strauss & Howe 2000). There have been many attempts to define the young generation who have grown up with digital technologies as a vital part of their everyday life. This generation now inhabits today’s schools and ...... it transforms teachers’ and students’ roles and responsibilities. Thus, this paper contributes to establishing digital education as a relevant empirical field within STS.......‘Digital Natives’, ‘Net Generation’ or ‘Milliners’ (Prensky 2001, Tapscott 1998, Strauss & Howe 2000). There have been many attempts to define the young generation who have grown up with digital technologies as a vital part of their everyday life. This generation now inhabits today’s schools...... and their entry has not escaped the attention from teachers, school managers and policy makers. Incorporating students’ digital skills or ‘expertise’ as a resource in teaching, e.g. through digital student production is an emergent trend in education. This trend is generally based on the assumption that students...

  17. Computerized Adaptive Test (CAT) Applications and Item Response Theory Models for Polytomous Items

    Science.gov (United States)

    Aybek, Eren Can; Demirtasli, R. Nukhet

    2017-01-01

    This article aims to provide a theoretical framework for computerized adaptive tests (CAT) and item response theory models for polytomous items. Besides that, it aims to introduce the simulation and live CAT software to the related researchers. Computerized adaptive test algorithm, assumptions of item response theory models, nominal response…

  18. A software for digital image processing used in constructions of voxels phantoms

    International Nuclear Information System (INIS)

    Vieira, Jose Wilson; Fernando Roberto de Andrade

    2008-01-01

    This paper presents, based on menus and menu items, the second version of software DIP-Digital Image Processing, that reads, edits and writes binary files containing the matrix 3D corresponding to a transversal voxels images of a certain geometry that may be a human body or other volume of interest

  19. Language-related differential item functioning between English and German PROMIS Depression items is negligible.

    Science.gov (United States)

    Fischer, H Felix; Wahl, Inka; Nolte, Sandra; Liegl, Gregor; Brähler, Elmar; Löwe, Bernd; Rose, Matthias

    2017-12-01

    To investigate differential item functioning (DIF) of PROMIS Depression items between US and German samples we compared data from the US PROMIS calibration sample (n = 780), a German general population survey (n = 2,500) and a German clinical sample (n = 621). DIF was assessed in an ordinal logistic regression framework, with 0.02 as criterion for R 2 -change and 0.096 for Raju's non-compensatory DIF. Item parameters were initially fixed to the PROMIS Depression metric; we used plausible values to account for uncertainty in depression estimates. Only four items showed DIF. Accounting for DIF led to negligible effects for the full item bank as well as a post hoc simulated computer-adaptive test (German general population sample was considerably lower compared to the US reference value of 50. Overall, we found little evidence for language DIF between US and German samples, which could be addressed by either replacing the DIF items by items not showing DIF or by scoring the short form in German samples with the corrected item parameters reported. Copyright © 2016 John Wiley & Sons, Ltd.

  20. Marketingová komunikace portálu DigitalColor

    OpenAIRE

    Jelenská, Andrea

    2015-01-01

    Jelenská, A., Marketing communication of the portal DigitalColor. Bachelor thesis. Brno: 2015. This bachelor thesis is orientated on the proposal of marketing communications of the photographic portal DigitalColor. In its theoretical part the conceptions and implements connected with marketing communication are defined. The practical part concentrates on the proposal of propagation and the connected analysis of contemporary marketing communications of the portal, analysis of competition and s...

  1. Astronomy in the Digital Universe

    Science.gov (United States)

    Haisch, Bernard M.; Lindblom, J.; Terzian, Y.

    2006-12-01

    The Digital Universe is an Internet project whose mission is to provide free, accurate, unbiased information covering all aspects of human knowledge, and to inspire humans to learn, make use of, and expand this knowledge. It is planned to be a decades long effort, inspired by the Encyclopedia Galactica concept popularized by Carl Sagan, and is being developed by the non-profit Digital Universe Foundation. A worldwide network of experts is responsible for selecting content featured within the Digital Universe. The first publicly available content is the Encyclopedia of Earth, a Boston University project headed by Prof. Cutler Cleveland, which will be part of the Earth Portal. The second major content area will be an analogous Encyclopedia of the Cosmos to be part of the Cosmos Portal. It is anticipated that this will evolve into a major resource for astronomy education. Authors and topic editors are now being recruited for the Encyclopedia of the Cosmos.

  2. Lessons learned in digital upgrade projects digital control system implementation at US nuclear power stations

    International Nuclear Information System (INIS)

    Kelley, S.; Bolian, T. W.

    2006-01-01

    AREVA NP has gained significant experience during the past five years in digital upgrades at operating nuclear power stations in the US. Plants are seeking modernization with digital technology to address obsolescence, spare parts availability, vendor support, increasing age-related failures and diminished reliability. New systems offer improved reliability and functionality, and decreased maintenance requirements. Significant lessons learned have been identified relating to the areas of licensing, equipment qualification, software quality assurance and other topics specific to digital controls. Digital control systems have been installed in non safety-related control applications at many utilities within the last 15 years. There have also been a few replacements of small safety-related systems with digital technology. Digital control systems are proving to be reliable, accurate, and easy to maintain. Digital technology is gaining acceptance and momentum with both utilities and regulatory agencies based upon the successes of these installations. Also, new plants are being designed with integrated digital control systems. To support plant life extension and address obsolescence of critical components, utilities are beginning to install digital technology for primary safety-system replacement. AREVA NP analyzed operating experience and lessons learned from its own digital upgrade projects as well as industry-wide experience to identify key issues that should be considered when implementing digital controls in nuclear power stations

  3. Selecting Items for Criterion-Referenced Tests.

    Science.gov (United States)

    Mellenbergh, Gideon J.; van der Linden, Wim J.

    1982-01-01

    Three item selection methods for criterion-referenced tests are examined: the classical theory of item difficulty and item-test correlation; the latent trait theory of item characteristic curves; and a decision-theoretic approach for optimal item selection. Item contribution to the standardized expected utility of mastery testing is discussed. (CM)

  4. Asymptotic Standard Errors for Item Response Theory True Score Equating of Polytomous Items

    Science.gov (United States)

    Cher Wong, Cheow

    2015-01-01

    Building on previous works by Lord and Ogasawara for dichotomous items, this article proposes an approach to derive the asymptotic standard errors of item response theory true score equating involving polytomous items, for equivalent and nonequivalent groups of examinees. This analytical approach could be used in place of empirical methods like…

  5. Communicating mathematics in the digital era

    CERN Document Server

    Borwein, Jonathan; Rodrigues, Jose Francisco

    2008-01-01

    The digital era has dramatically changed the ways that researchers search, produce, publish, and disseminate their scientific work. These processes are still rapidly evolving due to improvements in information science, new achievements in computer science technologies, and initiatives such as DML and open access journals, digitization projects, scientific reference catalogs, and digital repositories. These changes have prompted many mathematicians to play an active part in the developments of the digital era, and have led mathematicians to promote and discuss new ideas with colleagues from other fields, such as technology developers and publishers. This book is a collection of contributions by key leaders in the field, offering the paradigms and mechanisms for producing, searching, and exploiting scientific and technical scholarship in mathematics in the digital era.

  6. Overview of classical test theory and item response theory for the quantitative assessment of items in developing patient-reported outcomes measures.

    Science.gov (United States)

    Cappelleri, Joseph C; Jason Lundy, J; Hays, Ron D

    2014-05-01

    The US Food and Drug Administration's guidance for industry document on patient-reported outcomes (PRO) defines content validity as "the extent to which the instrument measures the concept of interest" (FDA, 2009, p. 12). According to Strauss and Smith (2009), construct validity "is now generally viewed as a unifying form of validity for psychological measurements, subsuming both content and criterion validity" (p. 7). Hence, both qualitative and quantitative information are essential in evaluating the validity of measures. We review classical test theory and item response theory (IRT) approaches to evaluating PRO measures, including frequency of responses to each category of the items in a multi-item scale, the distribution of scale scores, floor and ceiling effects, the relationship between item response options and the total score, and the extent to which hypothesized "difficulty" (severity) order of items is represented by observed responses. If a researcher has few qualitative data and wants to get preliminary information about the content validity of the instrument, then descriptive assessments using classical test theory should be the first step. As the sample size grows during subsequent stages of instrument development, confidence in the numerical estimates from Rasch and other IRT models (as well as those of classical test theory) would also grow. Classical test theory and IRT can be useful in providing a quantitative assessment of items and scales during the content-validity phase of PRO-measure development. Depending on the particular type of measure and the specific circumstances, the classical test theory and/or the IRT should be considered to help maximize the content validity of PRO measures. Copyright © 2014 Elsevier HS Journals, Inc. All rights reserved.

  7. DSH: Special Issue 'Digital Humanities 2014'

    OpenAIRE

    Terras Melissa; Clivaz Claire; Verhoeven Deb; Kaplan Frédéric

    2015-01-01

    The special issue presents selected proceedings from Digital Humanities 2014. Digital Humanities is the annual conference organized and sponsored by the Alliance of Digital Humanities Organizations (ADHO) and between 7th and 12th July 2014 over 700 attendees gathered for DH2014 at the University of Lausanne and the École polytechnique fédérale de Lausanne Switzerland (http://dh2014.org/): to date this remains the largest ever meeting of Digital Humanities scholars worldwide. Traditionally the...

  8. MIMIC Methods for Assessing Differential Item Functioning in Polytomous Items

    Science.gov (United States)

    Wang, Wen-Chung; Shih, Ching-Lin

    2010-01-01

    Three multiple indicators-multiple causes (MIMIC) methods, namely, the standard MIMIC method (M-ST), the MIMIC method with scale purification (M-SP), and the MIMIC method with a pure anchor (M-PA), were developed to assess differential item functioning (DIF) in polytomous items. In a series of simulations, it appeared that all three methods…

  9. Evaluation of Northwest University, Kano Post-UTME Test Items Using Item Response Theory

    Science.gov (United States)

    Bichi, Ado Abdu; Hafiz, Hadiza; Bello, Samira Abdullahi

    2016-01-01

    High-stakes testing is used for the purposes of providing results that have important consequences. Validity is the cornerstone upon which all measurement systems are built. This study applied the Item Response Theory principles to analyse Northwest University Kano Post-UTME Economics test items. The developed fifty (50) economics test items was…

  10. A Harmonized Process Model for Digital Forensic Investigation Readiness

    OpenAIRE

    Valjarevic , Aleksandar; Venter , Hein

    2013-01-01

    Part 2: FORENSIC MODELS; International audience; Digital forensic readiness enables an organization to prepare itself to perform digital forensic investigations in an efficient and effective manner. The benefits include enhancing the admissibility of digital evidence, better utilization of resources and greater incident awareness. However, a harmonized process model for digital forensic readiness does not currently exist and, thus, there is a lack of effective and standardized implementations...

  11. From Doing Digital to Being Digital: Exploring Workplace Adoption of Technology in the Age of Digital Disruption

    Science.gov (United States)

    Murdoch, Donna; Fichter, Rachel

    2017-01-01

    In this article, it is explored how digital transformation is reshaping existing conceptions of technology adoption in the workplace and, as part of this, why the adoption of enterprise technology often lags behind consumer technology. The effect of business intractability towards technological advancement is examined. Also, the inability to…

  12. Using Differential Item Functioning Procedures to Explore Sources of Item Difficulty and Group Performance Characteristics.

    Science.gov (United States)

    Scheuneman, Janice Dowd; Gerritz, Kalle

    1990-01-01

    Differential item functioning (DIF) methodology for revealing sources of item difficulty and performance characteristics of different groups was explored. A total of 150 Scholastic Aptitude Test items and 132 Graduate Record Examination general test items were analyzed. DIF was evaluated for males and females and Blacks and Whites. (SLD)

  13. Alpine Windharvest: development of information base regarding potentials and the necessary technical, legal and socio-economic conditions for expanding wind energy in the Alpine Space - Digital relief analysis - Abstract of work package 7

    Energy Technology Data Exchange (ETDEWEB)

    Schaffner, B.; Cattin, R. [Meteotest, Berne (Switzerland)

    2005-07-01

    This report presents an abstract of the development work carried out by the Swiss meteorology specialists METEOTEST as part of a project carried out together with the Swiss wind-energy organisation 'Suisse Eole'. The framework for the project is the EU Interreg IIIB Alpine Space Programme, a European Community Initiative Programme funded by the European Regional Development Fund. The project investigated the use of digital relief-analysis. The series of reports describes the development and use of a basic information system to aid the investigation of the technical, legal and socio-economical conditions for the use of wind energy in the alpine area. This report presents an abstract of the work done as part of the Work Package 7 of the Alpine Windharvest project.

  14. #digital_disruption @amnesty international: from digital to networked to hybrid activism - A case study of the meaning and adoption of digital activism in changing 20th century civil society organisations

    OpenAIRE

    Özkula, Suay Melisa

    2017-01-01

    Like many organisations in the 21st century, longstanding civil society organisations are facing new challenges in adapting to the digital age. This thesis addresses those concerns through an exploration of the social meaning and contextualised effects of digital activism at case study Amnesty International. It provides a socio-cultural account of AI and a conceptual perspective on digital activism as part of Amnesty's digitalisation processes. It explores existing concerns around the tension...

  15. Item Response Data Analysis Using Stata Item Response Theory Package

    Science.gov (United States)

    Yang, Ji Seung; Zheng, Xiaying

    2018-01-01

    The purpose of this article is to introduce and review the capability and performance of the Stata item response theory (IRT) package that is available from Stata v.14, 2015. Using a simulated data set and a publicly available item response data set extracted from Programme of International Student Assessment, we review the IRT package from…

  16. 3D Adaptive Virtual Exhibit for the University of Denver Digital Collections

    Directory of Open Access Journals (Sweden)

    Shea-Tinn Yeh

    2015-07-01

    Full Text Available While the gaming industry has taken the world by storm with its three-dimensional (3D user interfaces, current digital collection exhibits presented by museums, historical societies, and libraries are still limited to a two-dimensional (2D interface display. Why can’t digital collections take advantage of this 3D interface advancement? The prototype discussed in this paper presents to the visitor a 3D virtual exhibit containing a set of digital objects from the University of Denver Libraries’ digital image collections, giving visitors an immersive experience when viewing the collections. In particular, the interface is adaptive to the visitor’s browsing behaviors and alters the selection and display of the objects throughout the exhibit to encourage serendipitous discovery. Social media features were also integrated to allow visitors to share items of interest and to create a sense of virtual community.

  17. Transforming Students into Digital Hakawati: Digital Storytelling in the AFL Classroom: Learners’ Attitudes and Recommendations

    Directory of Open Access Journals (Sweden)

    Gaby Semaan

    2016-07-01

    Full Text Available In a small exploratory pilot study, Digital Storytelling was used to enhance language learning and engagement as part of an Arabic as a Foreign Language (AFL program. Twenty-three AFL learners studying in a seven-week intensive Arabic summer program participated in the pilot study. Participants took a self-administered online survey that rated their experience creating digital stories in Arabic using three computer software programs and two iPad apps. The results of the pilot study suggest that Digital Storytelling (DS can be an effective tool for enhancing Arabic instruction at multiple proficiency levels.

  18. Item Banking with Embedded Standards

    Science.gov (United States)

    MacCann, Robert G.; Stanley, Gordon

    2009-01-01

    An item banking method that does not use Item Response Theory (IRT) is described. This method provides a comparable grading system across schools that would be suitable for low-stakes testing. It uses the Angoff standard-setting method to obtain item ratings that are stored with each item. An example of such a grading system is given, showing how…

  19. Digital vascular imaging

    International Nuclear Information System (INIS)

    Ludwig, J.W.; Engels, B.C.H.

    1981-01-01

    Digitalizing videosignals from an image intensifying TV-chain, followed by subtraction, contrast intensifying, and reformation to analogous signal deliver angiography pictures of high quality after intravenous injection of the contrast medium. As the examination is only little invasive it can be carried out on outdoor patients or in the polyclinics. The possibilities of the digital vessel imagination (DVI) are shown at vessel images of different parts of the body; a 36 cm image intensifyer which can be switched to 3 different sorts of operation and has a plumbicon-TV recording tube is used as receiver. (orig.) [de

  20. Digital curation and online resources: digital scanning of surgical tools at the royal college of physicians and surgeons of Glasgow for an open university learning resource.

    Science.gov (United States)

    Earley, Kirsty; Livingstone, Daniel; Rea, Paul M

    2017-01-01

    Collection preservation is essential for the cultural status of any city. However, presenting a collection publicly risks damage. Recently this drawback has been overcome by digital curation. Described here is a method of digitisation using photogrammetry and virtual reality software. Items were selected from the Royal College of Physicians and Surgeons of Glasgow archives, and implemented into an online learning module for the Open University. Images were processed via Agisoft Photoscan, Autodesk Memento, and Garden Gnome Object 2VR. Although problems arose due to specularity, 2VR digital models were developed for online viewing. Future research must minimise the difficulty of digitising specular objects.

  1. Digital Processor Module Reliability Analysis of Nuclear Power Plant

    International Nuclear Information System (INIS)

    Lee, Sang Yong; Jung, Jae Hyun; Kim, Jae Ho; Kim, Sung Hun

    2005-01-01

    The system used in plant, military equipment, satellite, etc. consists of many electronic parts as control module, which requires relatively high reliability than other commercial electronic products. Specially, Nuclear power plant related to the radiation safety requires high safety and reliability, so most parts apply to Military-Standard level. Reliability prediction method provides the rational basis of system designs and also provides the safety significance of system operations. Thus various reliability prediction tools have been developed in recent decades, among of them, the MI-HDBK-217 method has been widely used as a powerful tool for the prediction. In this work, It is explained that reliability analysis work for Digital Processor Module (DPM, control module of SMART) is performed by Parts Stress Method based on MIL-HDBK-217F NOTICE2. We are using the Relex 7.6 of Relex software corporation, because reliability analysis process requires enormous part libraries and data for failure rate calculation

  2. Exploring differential item functioning (DIF) with the Rasch model: a comparison of gender differences on eighth grade science items in the United States and Spain.

    Science.gov (United States)

    Babiar, Tasha Calvert

    2011-01-01

    Traditionally, women and minorities have not been fully represented in science and engineering. Numerous studies have attributed these differences to gaps in science achievement as measured by various standardized tests. Rather than describe mean group differences in science achievement across multiple cultures, this study focused on an in-depth item-level analysis across two countries: Spain and the United States. This study investigated eighth-grade gender differences on science items across the two countries. A secondary purpose of the study was to explore the nature of gender differences using the many-faceted Rasch Model as a way to estimate gender DIF. A secondary analysis of data from the Third International Mathematics and Science Study (TIMSS) was used to address three questions: 1) Does gender DIF in science achievement exist? 2) Is there a relationship between gender DIF and characteristics of the science items? 3) Do the relationships between item characteristics and gender DIF in science items replicate across countries. Participants included 7,087 eight grade students from the United States and 3,855 students from Spain who participated in TIMSS. The Facets program (Linacre and Wright, 1992) was used to estimate gender DIF. The results of the analysis indicate that the content of the item seemed to be related to gender DIF. The analysis also suggests that there is a relationship between gender DIF and item format. No pattern of gender DIF related to cognitive demand was found. The general pattern of gender DIF was similar across the two countries used in the analysis. The strength of item-level analysis as opposed to group mean difference analysis is that gender differences can be detected at the item level, even when no mean differences can be detected at the group level.

  3. Low-Cost Digital Implementation of Proportional-Resonant Current Controllers for PV Inverter Applications Using Delta Operator

    DEFF Research Database (Denmark)

    Sera, Dezso; Kerekes, Tamas; Lungeanu, Marian

    2005-01-01

    the possibility of selective harmonic compensation. However, in case of digital implementation on a low-cost fixedpoint DSP, the limited computational power and the limited numerical representation precision can restrict the utilization of it. The present paper proposes a different way of digital implementation...... of the P+Resonant controller with selective harmonic compensation on a low-cost fixed-point DSP. The resonant part of the P+R has been implemented as a second order filter based on Delta operator. The current controller, together with harmonic compensation for the 3rd, 5th, and 7th harmonics has been...

  4. P2-19: The Effect of item Repetition on Item-Context Association Depends on the Prior Exposure of Items

    Directory of Open Access Journals (Sweden)

    Hongmi Lee

    2012-10-01

    Full Text Available Previous studies have reported conflicting findings on whether item repetition has beneficial or detrimental effects on source memory. To reconcile such contradictions, we investigated whether the degree of pre-exposure of items can be a potential modulating factor. The experimental procedures spanned two consecutive days. On Day 1, participants were exposed to a set of unfamiliar faces. On Day 2, the same faces presented on the previous day were used again in half of the participants, whereas novel faces were used for the other half. Day 2 procedures consisted of three successive phases: item repetition, source association, and source memory test. In the item repetition phase, half of the face stimuli were repeatedly presented while participants were making male/female judgments. During the source association phase, both the repeated and the unrepeated faces appeared in one of the four locations on the screen. Finally, participants were tested on the location in which a given face was presented during the previous phase and reported the confidence of their memory. Source memory accuracy was measured as the percentage of correct non-guess trials. As results, we found a significant interaction between prior exposure and repetition. Repetition impaired source memory when the items had been pre-exposed on Day 1, while it led to greater accuracy in novel ones. These results show that pre-experimental exposure can modulate the effects of repetition on associative binding between an item and its contextual information, suggesting that pre-existing representation and novelty signal interact to form new episodic memory.

  5. Guideline for the seismic technical evaluation of replacement items for nuclear power plants

    International Nuclear Information System (INIS)

    Harris, S.P.; Cushing, R.W.; Johnson, H.W.; Abeles, J.M.

    1993-02-01

    Seismic qualification for equipment originally installed in nuclear power plants was typically performed by the original equipment suppliers or manufactures (OES/OEM). Many of the OES/OEM no longer maintain quality assurance programs with adequate controls for supplying nuclear equipment. Utilities themselves must provide reasonable assurance in the continued seismic adequacy of such replacement items. This guideline provides practical, cost-effective techniques which can be used to provide reasonable assurance that replacement items will meet seismic performance requirements necessary to maintain the seismic design basis of commercial nuclear power plants. It also provides a method for determining when a seismic technical evaluation of replacement items (STERI) is required as part of the procurement process for spare and replacement items. Guidance on supplier program requirements necessary to maintain continued seismic adequacy and on documentation of maintaining required seismic adequacy is also included

  6. Digital and conventional radiology techniques: comparison of dosage and costs

    International Nuclear Information System (INIS)

    Arranza, L.; Albornoz, C. de

    1996-01-01

    To compare the radiation dosage and costs in conventional and digital technologies. The study dealt with transverse sections. The dosage applied with conventional technology was measured in 254 patients who intertwined 402 explorations of 6 anatomic regions in 4 Radiodiagnostic Services. The dosage applied with digital technology was measured in 57 patients who underwent 95 explorations of the same anatomic region in one Radiodiagnostic Service. The costs of the 6 types of conventional and digital explorations performed were calculated for two Radiodiagnostic Service. The doses administered (mGy) using convectional/digital technology were as follows: chest PA 0.2/0.1; chest LAT 0.7/0.3; breast CC 7.0/8.4; breast LAT 7.0/7.8; breast OB 7.0/10.5; cervical spine AP 9.6/9.0; cervical spine LAT 21.9/29.6; pelvis AP 7.3/7.1; plain abdominal 6.5/2.2. The costs incurred (1992 pesetas) with the convectional/digital technologies: chest AP and LAT 1,393/2,973; portable chest 2,027/3,714; mammography 2,357/3,486; phlebography 12,718/14,023; hysterosalpingography 4,876/6,701; bone scientigraphy 1,633/2,839. Compared with conventional technology, digital imaging reduces the radiation doses received by the patients, except in the case of mammography. The costs associated with the use of digital technology are greater than those incurred with conventional technology, mainly due to the costs of amortization. the use of digital technology is more justified when: 1) it is very necessary to reduce the dosage; 2) studies of chest and abdomen predominant; 3) the volume of utilization is high; 4) staff management is flexible , and 5) the cost of purchasing the equipment is lower. (Author) 10 refs

  7. Vibration measurements by pulsed digital holographic endoscopy

    Science.gov (United States)

    Schedin, Staffan; Pedrini, Giancarlo; Perez-Lopez, Carlos; Mendoza Santoyo, Fernando

    2005-02-01

    Digital holographic interferometry in combination with a flexible fiber endoscope allows high precision measurements of deformations on hidden objects surfaces, inside cavities and objects with small access apertures. A digital holographic endoscopy system is described with a frequency-doubled, twin oscillator Q-switched pulsed Nd:YAG laser as light source. A sequence of digital hologram pairs are recorded with a maximum repetition rate of 260 ms. Each digital hologram is captured at separate video frames of a CCD-camera. The time separation between the laser pulses from each cavity can be set in the range from 50 to 500 μs. The digital holograms are transferred to a PC via a frame grabber and evaluated quantitatively by the Fourier transform method. The resulting phase fringe pattern has the information needed to evaluate quantitatively the amount of the deformation. Experimental results of vibration measurements of hidden mechanical and biological object surfaces are presented. The quality of the results obtained by mechanical object surfaces is usually higher than for biological surfaces. This can be explained easily by the fact that a biological surface is much more complex than a mechanical surface in the sense that some parts of the surface may reflect the light well whereas other parts may absorb the light. Also, biological surfaces are translucent, which means that part of the light may enter inside the sample where it may be absorbed or reflected.

  8. Pre-Service Teachers Designing and Constructing "Good Digital Games"

    Science.gov (United States)

    Artym, Corbett; Carbonaro, Mike; Boechler, Patricia

    2016-01-01

    There is a growing interest in the application of digital games to enhance learning across many educational levels. This paper investigates pre-service teachers' ability to operationalize the learning principles that are considered part of a good digital game (Gee, 2007) by designing digital games in Scratch. Forty pre-service teachers, enrolled…

  9. Investigating the Impact of Item Parameter Drift for Item Response Theory Models with Mixture Distributions

    Directory of Open Access Journals (Sweden)

    Yoon Soo ePark

    2016-02-01

    Full Text Available This study investigates the impact of item parameter drift (IPD on parameter and ability estimation when the underlying measurement model fits a mixture distribution, thereby violating the item invariance property of unidimensional item response theory (IRT models. An empirical study was conducted to demonstrate the occurrence of both IPD and an underlying mixture distribution using real-world data. Twenty-one trended anchor items from the 1999, 2003, and 2007 administrations of Trends in International Mathematics and Science Study (TIMSS were analyzed using unidimensional and mixture IRT models. TIMSS treats trended anchor items as invariant over testing administrations and uses pre-calibrated item parameters based on unidimensional IRT. However, empirical results showed evidence of two latent subgroups with IPD. Results showed changes in the distribution of examinee ability between latent classes over the three administrations. A simulation study was conducted to examine the impact of IPD on the estimation of ability and item parameters, when data have underlying mixture distributions. Simulations used data generated from a mixture IRT model and estimated using unidimensional IRT. Results showed that data reflecting IPD using mixture IRT model led to IPD in the unidimensional IRT model. Changes in the distribution of examinee ability also affected item parameters. Moreover, drift with respect to item discrimination and distribution of examinee ability affected estimates of examinee ability. These findings demonstrate the need to caution and evaluate IPD using a mixture IRT framework to understand its effect on item parameters and examinee ability.

  10. Investigating the Impact of Item Parameter Drift for Item Response Theory Models with Mixture Distributions.

    Science.gov (United States)

    Park, Yoon Soo; Lee, Young-Sun; Xing, Kuan

    2016-01-01

    This study investigates the impact of item parameter drift (IPD) on parameter and ability estimation when the underlying measurement model fits a mixture distribution, thereby violating the item invariance property of unidimensional item response theory (IRT) models. An empirical study was conducted to demonstrate the occurrence of both IPD and an underlying mixture distribution using real-world data. Twenty-one trended anchor items from the 1999, 2003, and 2007 administrations of Trends in International Mathematics and Science Study (TIMSS) were analyzed using unidimensional and mixture IRT models. TIMSS treats trended anchor items as invariant over testing administrations and uses pre-calibrated item parameters based on unidimensional IRT. However, empirical results showed evidence of two latent subgroups with IPD. Results also showed changes in the distribution of examinee ability between latent classes over the three administrations. A simulation study was conducted to examine the impact of IPD on the estimation of ability and item parameters, when data have underlying mixture distributions. Simulations used data generated from a mixture IRT model and estimated using unidimensional IRT. Results showed that data reflecting IPD using mixture IRT model led to IPD in the unidimensional IRT model. Changes in the distribution of examinee ability also affected item parameters. Moreover, drift with respect to item discrimination and distribution of examinee ability affected estimates of examinee ability. These findings demonstrate the need to caution and evaluate IPD using a mixture IRT framework to understand its effects on item parameters and examinee ability.

  11. Market and Labour Control in Digital Capitalism

    Directory of Open Access Journals (Sweden)

    Philipp Staab

    2016-11-01

    Full Text Available Theorists of post capitalism have recently argued for a more or less inevitable end to capitalism. They assume that private accumulation is systematically blocked by the inability of capitalist corporations to create revenues by setting prices as they lose control over the reproduction of their commodities and that in this process, capitalist labour will eventually disappear. Drawing on a case study of Amazon and thoughts on the policies of other leading digital corporations, we challenge these assumptions. Key corporate players of digitization are trying to become powerful monopolies and have partly succeeded in doing so, using the network effects and scaling opportunities of digital goods and building socio-technical ecosystems. These strategies have led to the development of in part isomorphic structures, hence creating a situation of oligopolistic market competition. We draw on basic assumptions of monopoly capital theory to argue that in this situation labour process rationalization becomes key to the corporation’s competitive strategies. We see the expansion of digital control and the organizational structures applied by key corporate players of the digital economy as evidence for the expansion of capitalist labour, not its reduction.

  12. The design of KRT digital system in Ling'ao Ⅱ

    International Nuclear Information System (INIS)

    Sun Yuanjun; Zhang Renyan; Zhao Weijun

    2013-01-01

    In the design of KRT system in Ling Ao Ⅱ, it requires the hardware composition shall be similar to that of Ling Ao Ⅰ. At the same time, the KRT system should be digitized and centralized. In order to realize the goal, the KRT system will be divided into the lower and upper parts. The local sensor at the lower part will transform the analog signal to digital signal in the local display unit; then the digital signals are sent to the upper part (cabinet) by RS-485; the cabinet collects the signals, saves and displays them in the server or operation workstation. or sends them to the DCS. On the other hand, the digital signals will be treated into analog or on/off signals in cabinet and transmitted to other systems. (authors)

  13. Development of six PROMIS pediatrics proxy-report item banks.

    Science.gov (United States)

    Irwin, Debra E; Gross, Heather E; Stucky, Brian D; Thissen, David; DeWitt, Esi Morgan; Lai, Jin Shei; Amtmann, Dagmar; Khastou, Leyla; Varni, James W; DeWalt, Darren A

    2012-02-22

    Pediatric self-report should be considered the standard for measuring patient reported outcomes (PRO) among children. However, circumstances exist when the child is too young, cognitively impaired, or too ill to complete a PRO instrument and a proxy-report is needed. This paper describes the development process including the proxy cognitive interviews and large-field-test survey methods and sample characteristics employed to produce item parameters for the Patient Reported Outcomes Measurement Information System (PROMIS) pediatric proxy-report item banks. The PROMIS pediatric self-report items were converted into proxy-report items before undergoing cognitive interviews. These items covered six domains (physical function, emotional distress, social peer relationships, fatigue, pain interference, and asthma impact). Caregivers (n = 25) of children ages of 5 and 17 years provided qualitative feedback on proxy-report items to assess any major issues with these items. From May 2008 to March 2009, the large-scale survey enrolled children ages 8-17 years to complete the self-report version and caregivers to complete the proxy-report version of the survey (n = 1548 dyads). Caregivers of children ages 5 to 7 years completed the proxy report survey (n = 432). In addition, caregivers completed other proxy instruments, PedsQL™ 4.0 Generic Core Scales Parent Proxy-Report version, PedsQL™ Asthma Module Parent Proxy-Report version, and KIDSCREEN Parent-Proxy-52. Item content was well understood by proxies and did not require item revisions but some proxies clearly noted that determining an answer on behalf of their child was difficult for some items. Dyads and caregivers of children ages 5-17 years old were enrolled in the large-scale testing. The majority were female (85%), married (70%), Caucasian (64%) and had at least a high school education (94%). Approximately 50% had children with a chronic health condition, primarily asthma, which was diagnosed or treated within 6

  14. Psychometric properties of the 7-item game addiction scale among french and German speaking adults.

    Science.gov (United States)

    Khazaal, Yasser; Chatton, Anne; Rothen, Stephane; Achab, Sophia; Thorens, Gabriel; Zullino, Daniele; Gmel, Gerhard

    2016-05-10

    The 7-item Game Addiction Scale (GAS) is a used to screen for addictive game use. Both cross cross-linguistic validation and validation in French and German is needed in adult samples. The objective of the study is to assess the factorial structure of the French and German versions of the GAS among adults. Two samples of men from French (N = 3318) and German (N = 2665) language areas of Switzerland were assessed with the GAS, the Major Depression Inventory (MDI), the Brief Sensation Seeking Scale, and the Zuckerman-Kuhlman Personality Questionnaire (ZKPQ-50-cc). They were also assessed for cannabis and alcohol use. The internal consistency of the scale was satisfactory (Cronbach α = 0.85). A one-factor solution was found in both samples. Small and positive associations were found between GAS scores and the MDI, as well as the Neuroticism-Anxiety and Aggression-Hostility subscales of the ZKPQ-50-cc. A small negative association was found with the ZKPQ-50-cc Sociability subscale. The GAS, in its French and German versions, is appropriate for the assessment of game addiction among adults.

  15. Trends in Nutrient Content of Children's Menu Items in U.S. Chain Restaurants

    Science.gov (United States)

    Moran, Alyssa J.; Block, Jason P.; Goshev, Simo G.; Bleich, Sara N.; Roberto, Christina A.

    2017-01-01

    Introduction Restaurant food is widely consumed by children and is associated with poor diet quality. Although many restaurants have made voluntary commitments to improve the nutritional quality of children's menus, it is unclear whether this has led to meaningful changes. Methods Nutrients in children's menu items (n=4,016) from 45 chain restaurants were extracted from the nutrition information database MenuStat. Bootstrapped mixed linear models estimated changes in mean calories, saturated fat, and sodium in children's menu items between 2012 and 2013, 2014, and 2015. Changes in nutrient content of these items over time were compared among restaurants participating in the Kids LiveWell initiative and non-participating restaurants. Types of available children's beverages were also examined. Data were analyzed in 2016. Results There was a significant increase in mean beverage calories from 2012 to 2013 (6, 95% CI=0.8, 10.6) and from 2012 to 2014 (11, 95% CI=3.7, 18.3), but no change between 2012 and 2015, and no differences in nutrient content of other items over time. Restaurants participating in Kids LiveWell reduced entrée calories between 2012 and 2013 (−24, 95% CI= −40.4, −7.2) and between 2012 and 2014 (−40, 95% CI= −68.1, −11.4) and increased side dish calories between 2012 and 2015 (49, 95% CI=4.6, 92.7) versus non-participating restaurants. Sugar-sweetened beverages consistently constituted 80% of children's beverages, with soda declining and flavored milks increasing between 2012 and 2015. Conclusions Results suggest little progress toward improving nutrition in children's menu items. Efforts are needed to engage restaurants in offering healthful children's meals. PMID:28089130

  16. Digital I and C: Safety, Security and Availability

    International Nuclear Information System (INIS)

    Liebhart, E.

    2012-01-01

    When planning to use digital I and C equipment in nuclear facilities (such as nuclear power plants or research reactors) the main concern is how to manage and control the aspect of 'software as part of digital I and C equipment'. Advantages, possible implications and risks of using digital signal processing channels, especially regarding the two key aspects of operational safety and cyber security are addressed, including examples of today's electronics such as Mirion's digital signal processing system Model proTK (or TK 250). (author)

  17. Full arch scans: conventional versus digital impressions--an in-vitro study.

    Science.gov (United States)

    Ender, A; Mehl, A

    2011-01-01

    The digital intraoral impression has become a central part of the CAD/CAM technique. The objective of the present study was to compare the accuracy (trueness and precision) of digital impressions of the full arch with that of conventional impressions on the in-vitro model. For this purpose, a master model was acquired with a new reference scanning process, the measuring trueness of which was +/- 4.1 microm and the precision +/- 2.5 microm. On the one hand, conventional impressions and then plaster models (n = 5) were produced from this master model, and on the other hand, digital impressions were made with the Cerec AC Bluecam and the Lava COS system (each n = 5). The plaster models were also scanned with the reference scanner. The available data records were superimposed and the differences determined. The deviation from the master model defines the trueness of the impression method. The deviations of the models among one another demonstrate the precision of the method. The trueness of the impressions was 55 +/- 21.8 microm in the conventional impression group, for digital impressions with Cerec Bluecam it was 49 +/- 14.2 microm and for digital impressions with Lava COS 40.3 +/- 14.1 microm. The precision was 61.3 +/- 17.9 microm for conventional impression with Impregum, 30.9 +/- 7.1 microm for digital impression with the Cerec Bluecam and 60.1 +/- 31.3 microm for digital impression with Lava COS. These in-vitro results show that accuracy of the digital impression is similar to that of the conventional impression. These results will have to be confirmed in further clinical studies.

  18. Self-Reported Digital Literacy of the Pharmacy Workforce in North East Scotland

    Directory of Open Access Journals (Sweden)

    Katie MacLure

    2015-10-01

    Full Text Available In their day-to-day practice, pharmacists, graduate (pre-registration pharmacists, pharmacy technicians, dispensing assistants and medicines counter assistants use widely available office, retail and management information systems alongside dedicated pharmacy management and electronic health (ehealth applications. The ability of pharmacy staff to use these applications at home and at work, also known as digital literacy or digital competence or e-skills, depends on personal experience and related education and training. The aim of this research was to gain insight into the self-reported digital literacy of the pharmacy workforce in the North East of Scotland. A purposive case sample survey was conducted across NHS Grampian in the NE of Scotland. Data collection was based on five items: sex, age band, role, pharmacy experience plus a final question about self-reported digital literacy. The study was conducted between August 2012 and March 2013 in 17 community and two hospital pharmacies. With few exceptions, pharmacy staff perceived their own digital literacy to be at a basic level. Secondary outcome measures of role, age, gender and work experience were not found to be clear determinants of digital literacy. Pharmacy staff need to be more digitally literate to harness technologies in pharmacy practice more effectively and efficiently.

  19. A Method for Generating Educational Test Items That Are Aligned to the Common Core State Standards

    Science.gov (United States)

    Gierl, Mark J.; Lai, Hollis; Hogan, James B.; Matovinovic, Donna

    2015-01-01

    The demand for test items far outstrips the current supply. This increased demand can be attributed, in part, to the transition to computerized testing, but, it is also linked to dramatic changes in how 21st century educational assessments are designed and administered. One way to address this growing demand is with automatic item generation.…

  20. GetData Digitizing Program Code: Description, Testing, Training

    International Nuclear Information System (INIS)

    Taova, S.

    2013-01-01

    90 percents of compilation in our center is obtained by data digitizing. So we are rather interested in the development of different techniques of data digitizing. Plots containing a great amount of points and solid lines are most complicated for digitizing. From our point of view including to the Exfor-Digitizer procedures of automatic or semi-automatic digitizing will allow to simplify significantly this process. We managed to test some free available program codes. Program GETDATA Graph Digitizer (www.getdata- graph-digitizer.com) looks more suitable for our purposes. GetData Graph Digitizer is a program for digitizing graphs, plots and maps. Main features of GetData Graph Digitizer are: - supported graphics formats are TIFF, JPEG, BMP and PCX; - two algorithms for automatic digitizing; - convenient manual digitizing; - reorder tool for easy points reordering; - save/open workspace, which allows to save the work and return to it later; - obtained data can be exported to the clipboard; - export to the formats: TXT (text file), XLS (MS Excel), XML, DXF (AutoCAD) and EPS (PostScript). GetData Graph Digitizer includes two algorithms for automatic digitizing. Auto trace lines: This method is designed to digitize solid lines. Choose the starting point, and the program will trace the line, stopping at it's end. To trace the line use Operations =>Auto trace lines menu or context menu ('Auto trace lines' item). To choose starting point click left mouse button, or click right mouse button to additionally choose direction for line tracing. Digitize area: The second way is to set digitizing area. This method works for any type of lines, including dashed lines. Data points are set at the intersection of grid with the line. You can choose the type of grid (X grid or Y grid), and set the distance between grid lines. You can also make the grid be shifted in such a way, that it will pass through a specific X (or Y) value. To digitize area use Operations →Digitize area menu

  1. Plutonium Finishing Plant (PFP) Criticality Alarm System Commercial Grade Item (CGI) Critical Characteristics

    International Nuclear Information System (INIS)

    WHITE, W.F.

    1999-01-01

    This document specifies the critical characteristics for Commercial Grade Items (CGI) procured for PFP's criticality alarm system as required by HNF-PRO-268 and HNF-PRO-1819. These are the minimum specifications that the equipment must meet in order to properly perform its safety function. There may be several manufacturers or models that meet the critical characteristics for any one item. PFP's Criticality Alarm System includes the nine criticality alarm system panels and their associated hardware. This includes all parts up to the first breaker in the electrical distribution system. Specific system boundaries and justifications are contained in HNF-SD-CP-SDD-003, ''Definition and Means of Maintaining the Criticality Detectors and Alarms Portion of the PFP Safety Envelope.'' The procurement requirements associated with the system necessitates procurement of some system equipment as Commercial Grade Items in accordance with HNF-PRO-268, ''Control of Purchased Items and Services.''

  2. 78 FR 11679 - Notice of Intent To Repatriate a Cultural Item: Binghamton University, State University of New...

    Science.gov (United States)

    2013-02-19

    ... with the appropriate Indian tribes, has determined that a cultural item meets the definition of sacred... the definition of sacred object under 25 U.S.C. 3001. This notice is published as part of the National... item described above is a specific ceremonial object needed by traditional Native American religious...

  3. Collaborative learning model inquiring based on digital game

    Science.gov (United States)

    Yuan, Jiugen; Xing, Ruonan

    2012-04-01

    With the development of computer education software, digital educational game has become an important part in our life, entertainment and education. Therefore how to make full use of digital game's teaching functions and educate through entertainment has become the focus of current research. The thesis make a connection between educational game and collaborative learning, the current popular teaching model, and concludes digital game-based collaborative learning model combined with teaching practice.

  4. Optimal digital filtering in gamma-ray spectroscopy

    International Nuclear Information System (INIS)

    Messai, A.; Nour, A.; Abdellani, I.

    2009-01-01

    In this paper, we address the subject of the digital nuclear spectroscopy as seen as a counterpart of the classic analogue approach. Consequently, we will present the design as well as the implementation on a DSP (Digital Signal Processor) board, of the various necessary digital pulse processing techniques via digital filtering in order to provide the principal tasks which often take place in a generic 'Gamma' digital spectroscopic setup. The first part will be devoted to the design of the digital IIR filter used for the charge preamplifier's slow-pole compensation. This will be followed by the practical estimation of the power spectral density relating to the electrical noise components present at the spectrometer's input. Thereafter, a very detailed attention will be given to the design of the digital optimal filter to be used for the charge measurements. We follow by another FIR filter that deals with the digital estimation of the reference line of measurements. Finally, we give a hardware implementation of the designed filters on the board: 'TMS320C6713-DSK', a DSP KIT developed by 'DIGITAL Spectrum'. (authors)

  5. Use of Digital Resources in an Academic Environment: A Qualitative Study of Students' Perceptions, Experiences, and Digital Literacy Skills

    Science.gov (United States)

    Matusiak, Krystyna K.

    2010-01-01

    The use of information resources for teaching and learning in an academic environment is undergoing a dramatic transformation. The development of digital technologies and the growth of the Internet have changed the format as well as the dissemination methods of scholarly resources. Digital libraries have been created as part of the transition from…

  6. The Technical Quality of Test Items Generated Using a Systematic Approach to Item Writing.

    Science.gov (United States)

    Siskind, Theresa G.; Anderson, Lorin W.

    The study was designed to examine the similarity of response options generated by different item writers using a systematic approach to item writing. The similarity of response options to student responses for the same item stems presented in an open-ended format was also examined. A non-systematic (subject matter expertise) approach and a…

  7. Science Column: Reconstruction: The Experimental Side of Digital Forensics

    Directory of Open Access Journals (Sweden)

    Fred Cohen

    2013-12-01

    Full Text Available Many in digital forensics seem to forget that the science part of digital forensics means experimentation and that implies a whole lot of things that most practitioners never learned.(see PDF for full column

  8. How to Forge a Digital Alibi on Mac OS X

    OpenAIRE

    Castiglione , Aniello; Cattaneo , Giuseppe; Prisco , Roberto ,; Santis , Alfredo ,; Yim , Kangbin

    2012-01-01

    Part 2: Workshop; International audience; Digital evidence is increasingly being used in court cases. It consists of traces left on digital devices from which one can infer information about the actions performed on those digital devices. Digital evidence can be on computers, phones, digital cameras belonging either to an alleged offender or to third parties, like servers operated by ISPs or by companies that offer web services, such as YouTube, Facebook and Gmail. Digital evidence can either...

  9. Extensor and flexor digit synovial sheath, sac and synovial capsule in the distal part of the limbs in buffalos and camels and its relation of surgical interference

    Directory of Open Access Journals (Sweden)

    S. AL-sadi

    2010-01-01

    Full Text Available Sixty one samples of the distal parts of limbs were obtained from different ages of buffalo and camels of both sex to study the synovial structures to determine the suitable sites for injection of surgical interference. The result showed that extensor digit synovial sheath was extend between middle or distal part of metacarpal (metatarsal to the extensor processes and this formed with synovial capsule dorsal pouches which serve in surgical interference. The flexor digit synovial sheath extended to palmar (planter between distal extremity of metacarpal (metatarsal to the middle of second phalanx in buffalo while in camel it extended to the proximal extremity of second phalanx, that sheath was formed with suspensory ligament and sessamoid bone palmar or planter pouches which were serve the surgical interference. Fourth synovial bursa observed situated dorsally between the extensor digit laterals tendon and capsule of fetlock joint, forms site of injection during surgical interference, while the other two synovial bursa were located to palmer (planter between deep flexor tendon and distal sessamoid bone in buffalo while in camel these bursa were located between deep flexor tendon and cartilage of the second phalanx, these bursa were served for surgical interference. The synovial capsule which serve the surgical interference through digit cushion these were shown extended from the claw capsule. The result show that surgical interference was form six pouches in buffalo and eight pouches in camel, which formed by synovial structures and the tissue associated with them.

  10. Recogida y gestión de datos de respuesta en bancos de items: análisis de un sistema informático

    Directory of Open Access Journals (Sweden)

    J. Gabriel Molina Ibáñez

    1998-02-01

    Full Text Available Item banks play a basic role as the base to build computerized adaptive tests but, in practice, the development of item banks suppose an important effort and no much support of software exists for this task. This paper is centered on the item response data collection and management involved in the work with item banks, as part of the analysis of a computer program oriented to support the development of item banks

  11. The Advancement of World Digital Cities

    DEFF Research Database (Denmark)

    Yasuoka, Mika; Ishida, Toru; Aurigi, Alessandro

    2009-01-01

    This chapter reviews the advancement of several worldwide activities on regional information spaces empowered by advanced technologies such as sensors, information terminals, broadband networks and wireless networks. In the US and Canada, a large number of community networks supported by grass root...... activities appeared in the early 1990s. In Europe, more than one hundred digital cities have been tried, often supported by local government, central government and EU in the name of local digitalization. Asian countries have actively adopted the latest information technologies as a part of national...... initiatives. In the past 15 years since the first stage of digital cities, the development of the original digital cities has leveled off or stabilized. In spite of that, by looking back at the trajectory of digital cities, it is clear that digital environments in cities often benefit from the previous...

  12. Driving Forces behind the Development and Stabilization of Knowledge Organization Systems in Digital Environments

    OpenAIRE

    Jaanus , Jörgen; Ley , Tobias

    2012-01-01

    Part 7: Doctoral Student Papers; International audience; The emergence of Digital Ecosystems can be endorsed by creating shared conceptualizations. Knowledge Organization Systems (KOS) form a backbone of organizing knowledge. Focusing in developing KOS and having its present and future requirements in mind would eventually support knowledge sharing and learning at collective level. Three types of KOS are distinguished: a) private level KOS; b) arbitrary KOS; c) methodic KOS. Knowledge Maturin...

  13. Evaluation of the weekly quality control of a digital mammography machine; Evaluacion del control de calidad semanal de un mamografo digital

    Energy Technology Data Exchange (ETDEWEB)

    Angulo Pain, E.; Ramos Caballero, L. J.; Urena Llinares, A.; Iborra Oquendo, M. A.; Quinones Rodriguez, L. A.; Castro Ramirez, I.; Gonzalez Aquino, P.; Aguirre Huelga, M. J.

    2013-07-01

    In the new edition of the PCCRD (2011) has been established as weekly quality control testing for digital mammography equipment the analysis of artifacts from the team and defective items in the DR, the constancy of the functioning of the CAE, the accuracy of the thickness determined by the compression system, constancy in the uniformity and quality of the image. The objective of the study is to evaluate data collected during the first year of operation of the equipment. (Author)

  14. FIA: An Open Forensic Integration Architecture for Composing Digital Evidence

    Science.gov (United States)

    Raghavan, Sriram; Clark, Andrew; Mohay, George

    The analysis and value of digital evidence in an investigation has been the domain of discourse in the digital forensic community for several years. While many works have considered different approaches to model digital evidence, a comprehensive understanding of the process of merging different evidence items recovered during a forensic analysis is still a distant dream. With the advent of modern technologies, pro-active measures are integral to keeping abreast of all forms of cyber crimes and attacks. This paper motivates the need to formalize the process of analyzing digital evidence from multiple sources simultaneously. In this paper, we present the forensic integration architecture (FIA) which provides a framework for abstracting the evidence source and storage format information from digital evidence and explores the concept of integrating evidence information from multiple sources. The FIA architecture identifies evidence information from multiple sources that enables an investigator to build theories to reconstruct the past. FIA is hierarchically composed of multiple layers and adopts a technology independent approach. FIA is also open and extensible making it simple to adapt to technological changes. We present a case study using a hypothetical car theft case to demonstrate the concepts and illustrate the value it brings into the field.

  15. Itens alimentares no consumo alimentar de crianças de 7 a 10 anos Food items in the food intake of children aged seven to ten years

    Directory of Open Access Journals (Sweden)

    Patrícia de Fragas Hinnigi

    2012-06-01

    Full Text Available OBJETIVO: Descrever os itens alimentares mais representativos para o consumo total de energia, carboidratos, proteínas e lipídios de crianças de 7 a 10 anos. MÉTODOS: Elaborou-se uma lista com todos os alimentos consumidos com suas respectivas quantidades e quantificou-se a composição da dieta em energia e macronutrientes. A lista foi baseada em informações fornecidas pelo preenchimento de três Diários Alimentares (DA por 85 escolares de 7 a 10 anos que frequentavam uma escola pública na cidade de São Paulo. Obteve-se o agrupamento dos alimentos em 129 itens, calculou-se o percentual de contribuição de cada item no consumo alimentar dos nutrientes e identificaram-se aqueles que contribuíram com até 95% da ingestão total de calorias e dos nutrientes selecionados. RESULTADOS: Os itens "Arroz branco, arroz à grega, arroz com legumes" e "Feijão marrom, preto, branco, lentilha" contribuíram de forma importante para o consumo de energia e carboidratos. O item "Leite integral fluido, leite integral em pó" foi representativo para o consumo de lipídios, além de proteínas e energia. Ressalta-se a importância no consumo em energia e carboidratos das bebidas doces (refrigerantes e sucos industrializados na dieta deste grupo populacional. CONCLUSÕES: É evidente a participação do arroz no consumo alimentar total de energia e carboidratos; do feijão em energia, carboidratos e proteínas; do leite em energia, proteínas e lipídios; carnes em energia, proteínas e lipídios; e pão em energia e carboidratos. Merece destaque a participação das bebidas doces no consumo total de energia e carboidratos e das guloseimas no consumo total de lipídios.OBJECTIVE: To describe the most representative food items regarding the total intake of energy, carbohydrates, proteins and lipids in children with ages between 7 and 10 years. METHODS: A list was prepared with all food intake and quantities, and the diet composition in relation to energy

  16. Digital Preservation at International Nuclear Information System (INIS)

    International Nuclear Information System (INIS)

    Savic, Dobrica; St-Pierre, Germain

    2013-01-01

    Since its creation in 1970 until 1996, the International Nuclear Information System (INIS) collected and converted to microfiche over 312 000 non-conventional literature (NCL) reports received from IAEA member states and international organizations. The microfiche collection contains over 1 million items, with an estimated total of 25 million pages of full-texts. In 1997, the INIS Secretariat replaced the microfiche-based production system with an imaging system to process and to disseminate all NCL documents in electronic format. That marked the beginning of digital preservation efforts that still continue today. This paper provides an overview of the digital preservation practices and the technical infrastructure of the International Nuclear Information System (INIS). It describes the technical processes, the standards in place, the hardware and software used, as well as all practices related to scanning, quality control, OCR, preservation and storage. (author)

  17. Digital Radiography of a Drop Tested 9975 Radioactive Materials Packaging

    International Nuclear Information System (INIS)

    Blanton, P.S.

    2001-01-01

    This paper discusses the use of radiography as a tool for evaluating damage to radioactive material packaging subjected to regulatory accident conditions. The Code of Federal Regulations, 10 CFR 71, presents the performance based requirements that must be used in the development (design, fabrication and testing) of a radioactive material packaging. The use of various non-destructive examination techniques in the fabrication of packages is common. One such technique is the use of conventional radiography in the examination of welds. Radiography is conventional in the sense that images are caught one at a time on film stock. Most recently, digital radiography has been used to characterize internal damage to a package subjected to the 30-foot hypothetical accident conditions (HAC) drop. Digital radiography allows for real time evaluation of the item being inspected. This paper presents a summary discussion of the digital radiographic technique and an example of radiographic results of a 9975 package following the HAC 30-foot drop

  18. Generalizability theory and item response theory

    NARCIS (Netherlands)

    Glas, Cornelis A.W.; Eggen, T.J.H.M.; Veldkamp, B.P.

    2012-01-01

    Item response theory is usually applied to items with a selected-response format, such as multiple choice items, whereas generalizability theory is usually applied to constructed-response tasks assessed by raters. However, in many situations, raters may use rating scales consisting of items with a

  19. Sharing the cost of redundant items

    DEFF Research Database (Denmark)

    Hougaard, Jens Leth; Moulin, Hervé

    2014-01-01

    We ask how to share the cost of finitely many public goods (items) among users with different needs: some smaller subsets of items are enough to serve the needs of each user, yet the cost of all items must be covered, even if this entails inefficiently paying for redundant items. Typical examples...... are network connectivity problems when an existing (possibly inefficient) network must be maintained. We axiomatize a family cost ratios based on simple liability indices, one for each agent and for each item, measuring the relative worth of this item across agents, and generating cost allocation rules...... additive in costs....

  20. Dentists' use of digital radiographic techniques: Part I - intraoral X-ray: a questionnaire study of Swedish dentists.

    Science.gov (United States)

    Svenson, Björn; Ståhlnacke, Katri; Karlsson, Reet; Fält, Anna

    2018-03-01

    The present study aims to gain knowledge about the dentist's use and choice of digital intraoral imaging methods. A questionnaire sent to 2481 dentists within the Swedish Dental Society contained questions about the type of X-ray technique used, problems experienced with digital radiography, and reasons for choosing digital technology, and about indications, clinic size and type of service. Response rate was 53%. Ninety-eight percent of the dentists had made the transition to digital radiography; only 2% used film technique, and solid-state detector (SSD) was the most used digital technique. More years in service decreases the likelihood of applying individual indications for performing a full mouth examination. More retakes were done with SSDs compared to storage phosphor plates. Reasons for choosing digital techniques were that work was easier and communication with the patients improved. However, dentists also experienced problems with digital techniques, such as exposure and projection errors and inadequate image quality. The Swedish Radiation Safety Authority states that all radiological examinations should be justified, something not always followed. This study showed that 98% of the respondents, Swedish dentists within the Swedish Dental Society, used digital techniques, and the most used was the solid-state technique.

  1. Development of six PROMIS pediatrics proxy-report item banks

    Directory of Open Access Journals (Sweden)

    Irwin Debra E

    2012-02-01

    Full Text Available Abstract Background Pediatric self-report should be considered the standard for measuring patient reported outcomes (PRO among children. However, circumstances exist when the child is too young, cognitively impaired, or too ill to complete a PRO instrument and a proxy-report is needed. This paper describes the development process including the proxy cognitive interviews and large-field-test survey methods and sample characteristics employed to produce item parameters for the Patient Reported Outcomes Measurement Information System (PROMIS pediatric proxy-report item banks. Methods The PROMIS pediatric self-report items were converted into proxy-report items before undergoing cognitive interviews. These items covered six domains (physical function, emotional distress, social peer relationships, fatigue, pain interference, and asthma impact. Caregivers (n = 25 of children ages of 5 and 17 years provided qualitative feedback on proxy-report items to assess any major issues with these items. From May 2008 to March 2009, the large-scale survey enrolled children ages 8-17 years to complete the self-report version and caregivers to complete the proxy-report version of the survey (n = 1548 dyads. Caregivers of children ages 5 to 7 years completed the proxy report survey (n = 432. In addition, caregivers completed other proxy instruments, PedsQL™ 4.0 Generic Core Scales Parent Proxy-Report version, PedsQL™ Asthma Module Parent Proxy-Report version, and KIDSCREEN Parent-Proxy-52. Results Item content was well understood by proxies and did not require item revisions but some proxies clearly noted that determining an answer on behalf of their child was difficult for some items. Dyads and caregivers of children ages 5-17 years old were enrolled in the large-scale testing. The majority were female (85%, married (70%, Caucasian (64% and had at least a high school education (94%. Approximately 50% had children with a chronic health condition, primarily

  2. Benchmarking the performance of fixed-image receptor digital radiographic systems part 1: a novel method for image quality analysis.

    Science.gov (United States)

    Lee, Kam L; Ireland, Timothy A; Bernardo, Michael

    2016-06-01

    This is the first part of a two-part study in benchmarking the performance of fixed digital radiographic general X-ray systems. This paper concentrates on reporting findings related to quantitative analysis techniques used to establish comparative image quality metrics. A systematic technical comparison of the evaluated systems is presented in part two of this study. A novel quantitative image quality analysis method is presented with technical considerations addressed for peer review. The novel method was applied to seven general radiographic systems with four different makes of radiographic image receptor (12 image receptors in total). For the System Modulation Transfer Function (sMTF), the use of grid was found to reduce veiling glare and decrease roll-off. The major contributor in sMTF degradation was found to be focal spot blurring. For the System Normalised Noise Power Spectrum (sNNPS), it was found that all systems examined had similar sNNPS responses. A mathematical model is presented to explain how the use of stationary grid may cause a difference between horizontal and vertical sNNPS responses.

  3. Dissociating the neural correlates of intra-item and inter-item working-memory binding.

    Directory of Open Access Journals (Sweden)

    Carinne Piekema

    Full Text Available BACKGROUND: Integration of information streams into a unitary representation is an important task of our cognitive system. Within working memory, the medial temporal lobe (MTL has been conceptually linked to the maintenance of bound representations. In a previous fMRI study, we have shown that the MTL is indeed more active during working-memory maintenance of spatial associations as compared to non-spatial associations or single items. There are two explanations for this result, the mere presence of the spatial component activates the MTL, or the MTL is recruited to bind associations between neurally non-overlapping representations. METHODOLOGY/PRINCIPAL FINDINGS: The current fMRI study investigates this issue further by directly comparing intrinsic intra-item binding (object/colour, extrinsic intra-item binding (object/location, and inter-item binding (object/object. The three binding conditions resulted in differential activation of brain regions. Specifically, we show that the MTL is important for establishing extrinsic intra-item associations and inter-item associations, in line with the notion that binding of information processed in different brain regions depends on the MTL. CONCLUSIONS/SIGNIFICANCE: Our findings indicate that different forms of working-memory binding rely on specific neural structures. In addition, these results extend previous reports indicating that the MTL is implicated in working-memory maintenance, challenging the classic distinction between short-term and long-term memory systems.

  4. Generalizability theory and item response theory

    OpenAIRE

    Glas, Cornelis A.W.; Eggen, T.J.H.M.; Veldkamp, B.P.

    2012-01-01

    Item response theory is usually applied to items with a selected-response format, such as multiple choice items, whereas generalizability theory is usually applied to constructed-response tasks assessed by raters. However, in many situations, raters may use rating scales consisting of items with a selected-response format. This chapter presents a short overview of how item response theory and generalizability theory were integrated to model such assessments. Further, the precision of the esti...

  5. A Study on the Countermeasures to the Revision of Nuclear Controlled Items

    International Nuclear Information System (INIS)

    Choi, Sun Do; Lim, Dong Hyuk

    2011-01-01

    NSG(Nuclear Suppliers Group) was formed to prevent proliferation in 1977 with nuclear test in India in 1974. INFCIRC/254/Part1 (Trigger List) as guidelines for controlling the nuclear material, reactor and related equipment, reactor nuclear material, reprocessing, enrichment, conversion, molding, heavy water production plant/equipment, technical was released in 1978, and the Export Control guidelines (INFCIRC/ 254/Part2) about Dual-use item which can be used for nuclear development was established in 1992. The two Export Control guidelines are agreements between NSG Participating Governments (PGs), so all PGs have an obligation about implementation of the agreement. In addition, NSG guidelines can be the export base of control law of the member nations including our country which joined in 1995 or matched with it. Recently, NSG is in the progress of the fundamental review of NSG guidelines established in 1978 and 1992. The terms of agreement will be reflected to the domestic legislation through the fundamental review, and it will entail the changes of classification and export license standard of export items. Thus, it was studied about export controlled items review and revise plan for establishing the clear export control guidelines by review of NSG guidelines as follows

  6. Trends in Nutrient Content of Children's Menu Items in U.S. Chain Restaurants.

    Science.gov (United States)

    Moran, Alyssa J; Block, Jason P; Goshev, Simo G; Bleich, Sara N; Roberto, Christina A

    2017-03-01

    Restaurant food is widely consumed by children and is associated with poor diet quality. Although many restaurants have made voluntary commitments to improve the nutritional quality of children's menus, it is unclear whether this has led to meaningful changes. Nutrients in children's menu items (n=4,016) from 45 chain restaurants were extracted from the nutrition information database MenuStat. Bootstrapped mixed linear models estimated changes in mean calories, saturated fat, and sodium in children's menu items between 2012 and 2013, 2014, and 2015. Changes in nutrient content of these items over time were compared among restaurants participating in the Kids LiveWell initiative and non-participating restaurants. Types of available children's beverages were also examined. Data were analyzed in 2016. There was a significant increase in mean beverage calories from 2012 to 2013 (6, 95% CI=0.8, 10.6) and from 2012 to 2014 (11, 95% CI=3.7, 18.3), but no change between 2012 and 2015, and no differences in nutrient content of other items over time. Restaurants participating in Kids LiveWell reduced entrée calories between 2012 and 2013 (-24, 95% CI= -40.4, -7.2) and between 2012 and 2014 (-40, 95% CI= -68.1, -11.4) and increased side dish calories between 2012 and 2015 (49, 95% CI=4.6, 92.7) versus non-participating restaurants. Sugar-sweetened beverages consistently constituted 80% of children's beverages, with soda declining and flavored milks increasing between 2012 and 2015. Results suggest little progress toward improving nutrition in children's menu items. Efforts are needed to engage restaurants in offering healthful children's meals. Copyright © 2016 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

  7. Repository Planning, Design, and Engineering: Part II-Equipment and Costing.

    Science.gov (United States)

    Baird, Phillip M; Gunter, Elaine W

    2016-08-01

    Part II of this article discusses and provides guidance on the equipment and systems necessary to operate a repository. The various types of storage equipment and monitoring and support systems are presented in detail. While the material focuses on the large repository, the requirements for a small-scale startup are also presented. Cost estimates and a cost model for establishing a repository are presented. The cost model presents an expected range of acquisition costs for the large capital items in developing a repository. A range of 5,000-7,000 ft(2) constructed has been assumed, with 50 frozen storage units, to reflect a successful operation with growth potential. No design or engineering costs, permit or regulatory costs, or smaller items such as the computers, software, furniture, phones, and barcode readers required for operations have been included.

  8. The 12-item World Health Organization Disability Assessment Schedule II (WHO-DAS II: a nonparametric item response analysis

    Directory of Open Access Journals (Sweden)

    Fernandez Ana

    2010-05-01

    Full Text Available Abstract Background Previous studies have analyzed the psychometric properties of the World Health Organization Disability Assessment Schedule II (WHO-DAS II using classical omnibus measures of scale quality. These analyses are sample dependent and do not model item responses as a function of the underlying trait level. The main objective of this study was to examine the effectiveness of the WHO-DAS II items and their options in discriminating between changes in the underlying disability level by means of item response analyses. We also explored differential item functioning (DIF in men and women. Methods The participants were 3615 adult general practice patients from 17 regions of Spain, with a first diagnosed major depressive episode. The 12-item WHO-DAS II was administered by the general practitioners during the consultation. We used a non-parametric item response method (Kernel-Smoothing implemented with the TestGraf software to examine the effectiveness of each item (item characteristic curves and their options (option characteristic curves in discriminating between changes in the underliying disability level. We examined composite DIF to know whether women had a higher probability than men of endorsing each item. Results Item response analyses indicated that the twelve items forming the WHO-DAS II perform very well. All items were determined to provide good discrimination across varying standardized levels of the trait. The items also had option characteristic curves that showed good discrimination, given that each increasing option became more likely than the previous as a function of increasing trait level. No gender-related DIF was found on any of the items. Conclusions All WHO-DAS II items were very good at assessing overall disability. Our results supported the appropriateness of the weights assigned to response option categories and showed an absence of gender differences in item functioning.

  9. Quality assurance in the procurement of items and services for nuclear power plants

    International Nuclear Information System (INIS)

    1979-01-01

    This Safety Guide was prepared as part of the Agency's programme, referred to as the NUSS programme, for establishing Codes of Practice and Safety Guides relating to nuclear power plants. It supplements the Agency's Code of Practice on Quality Assurance for Safety in Nuclear Power Plants (Safety Series No.50-C-QA), which states requirements for the control of procurement of items and services which are important to the safety of nuclear power plants, for the purpose of achieving quality. The establishment and implementation of controls over the procurement process provide a basis for establishing an appropriate level of confidence that the activities undertaken during procurement of items and services have been performed in accordance with the principles of quality assurance expressed in the Code, and that the required quality of items and services has been achieved. The purchaser, in establishing control over procurement, shall ensure that the quality criteria, quality level, and other quality requirements specified for the particular item or service are taken into account

  10. Item Response Theory with Covariates (IRT-C): Assessing Item Recovery and Differential Item Functioning for the Three-Parameter Logistic Model

    Science.gov (United States)

    Tay, Louis; Huang, Qiming; Vermunt, Jeroen K.

    2016-01-01

    In large-scale testing, the use of multigroup approaches is limited for assessing differential item functioning (DIF) across multiple variables as DIF is examined for each variable separately. In contrast, the item response theory with covariate (IRT-C) procedure can be used to examine DIF across multiple variables (covariates) simultaneously. To…

  11. Design and modelling of fast switching efficient seat valves for digital displacement pumps

    DEFF Research Database (Denmark)

    Rømer, Daniel; Johansen, Per; Pedersen, Henrik C.

    2013-01-01

    Digital Displacement Fluid Power Pumps/Motors are promising candidates for revolutionizing the efficiency of fluid power systems, which traditionally has suffered from poor efficiencies, especially at part load. The key to obtain efficient part load operation with digital displacement technology...

  12. Digital Student Expertise in the Making

    DEFF Research Database (Denmark)

    Stenbøg, Sofie

    student (e.g. Bennett et. al. 2008, Helsper & Eynon 2009). In this paper I go beyond the idea of digital expertise as something intrinsic. Building on STS’s central notion of performativity (e.g. Law & Singleton 2000) the paper argues that digital expertise should be studied as a temporary achievement......Digital Natives, iGens’ or New Millennium Learners (Prensky 2001, Raphelson 2014, OECD 2008). There are many labels for the generation of young (western) citizens who have grown up with digital, web based technologies as a crucial part of their everyday life. This genera-tion now inhabits schools...... all around the world and their entry has not escaped the attention from teachers, school managers and policy makers. A current trend within education management, in Denmark as well as internationally, is to incorporate the students’ digital skills or ‘expertise’ as a resource in teaching, e.g. through...

  13. Digital Culture and Digital Library

    Directory of Open Access Journals (Sweden)

    Yalçın Yalçınkaya

    2016-12-01

    Full Text Available In this study; digital culture and digital library which have a vital connection with each other are examined together. The content of the research consists of the interaction of culture, information, digital culture, intellectual technologies, and digital library concepts. The study is an entry work to integrity of digital culture and digital library theories and aims to expand the symmetry. The purpose of the study is to emphasize the relation between the digital culture and digital library theories acting intersection of the subjects that are examined. Also the perspective of the study is based on examining the literature and analytical evaluation in both studies (digital culture and digital library. Within this context, the methodology of the study is essentially descriptive and has an attribute for the transmission and synthesis of distributed findings produced in the field of the research. According to the findings of the study results, digital culture is an inclusive term that describes the effects of intellectual technologies in the field of information and communication. Information becomes energy and the spectrum of the information is expanding in the vertical rise through the digital culture. In this context, the digital library appears as a new living space of a new environment. In essence, the digital library is information-oriented; has intellectual technology support and digital platform; is in a digital format; combines information resources and tools in relationship/communication/cooperation by connectedness, and also it is the dynamic face of the digital culture in time and space independence. Resolved with the study is that the digital libraries are active and effective in the formation of global knowing and/or mass wisdom in the process of digital culture.

  14. The randomly renewed general item and the randomly inspected item with exponential life distribution

    International Nuclear Information System (INIS)

    Schneeweiss, W.G.

    1979-01-01

    For a randomly renewed item the probability distributions of the time to failure and of the duration of down time and the expectations of these random variables are determined. Moreover, it is shown that the same theory applies to randomly checked items with exponential probability distribution of life such as electronic items. The case of periodic renewals is treated as an example. (orig.) [de

  15. 48 CFR 252.211-7007 - Reporting of Government-Furnished Equipment in the DoD Item Unique Identification (IUID) Registry.

    Science.gov (United States)

    2010-10-01

    ... property, equipment, machine tools, or similar capital items. Unique item identifier (UII) means a set of... management of Government-furnished equipment shall be performed at the item level; and (2) Unless provided by... payments; (6) Intellectual property or software; or (7) Real property. (d) Procedures for establishing UIIs...

  16. HOW WELL PREPARED ARE THE PRIMARY GRADES IN ROMANIA TO USE DIGITAL TEXTBOOKS?

    Directory of Open Access Journals (Sweden)

    Maria Eliza DULAMĂ

    2017-08-01

    Full Text Available Digital textbooks were introduced in the Romanian education system in the 2014- 2015 school year. In order to find out how well prepared were the primary grades teachers and pupils to use the six digital textbooks of Mathematics and Environmental Exploration, for the 2nd grade, we administered a questionnaire. To the questionnaire, with 14 items, 36 primary grades teachers answered on a voluntary basis. We analysed teachers’ information and opinions about the following: the context in which they achieved knowledge about the digital textbooks, how adequate the respective technology was, the appropriateness of infrastructure and human resource for using the respective textbooks, the electronic support and the electronic apparatuses used, the context of using them and the forms of organising the activities for their use, the frequency of their use during classes, and the importance of working with those digital textbooks, as well as some of their disadvantages.

  17. Leveraging Digital Innovation in Healthcare

    DEFF Research Database (Denmark)

    Brown, Carol V.; Jensen, Tina Blegind; Aanestad, Margun

    2014-01-01

    Harnessing digital innovations for healthcare delivery has raised high expectations as well as major concerns. Several countries across the globe have made progress in achieving three common goals of lower costs, higher quality, and increased patient access to healthcare services through...... investments in digital infrastructures. New technologies are leveraged to achieve widespread 24x7 disease management, patients’ wellbeing, home-based healthcare and other patient-centric service innovations. Yet, digital innovations in healthcare face barriers in terms of standardization, data privacy...... landscapes in selected countries. Then panelists with expertise in digital data streams, cloud, and mobile computing will present concrete examples of healthcare service innovations that have the potential to address one or more of the global goals. ECIS attendees are invited to join a debate about...

  18. Screening for depression in advanced disease: psychometric properties, sensitivity, and specificity of two items of the Palliative Care Outcome Scale (POS).

    Science.gov (United States)

    Antunes, Bárbara; Murtagh, Fliss; Bausewein, Claudia; Harding, Richard; Higginson, Irene J

    2015-02-01

    Depression is common among patients with advanced disease but often difficult to detect. To assess the Palliative care Outcome Scale (POS) (10 items) against the Geriatric Depression Scale (GDS)-10 total score and the Hospital Anxiety and Depression Scale (HADS)-Depression subscale total score and determine if the POS has appropriate items to screen for depression among people with advanced disease. This was a secondary analysis performed on five studies. Four psychometric properties were assessed: data quality, scaling assumptions, acceptability, and internal consistency (reliability). Receiver operating characteristic (ROC) curves were used to determine the area under the curve. Sensitivity, specificity, positive and negative predictive values, false positive and negative rates, and positive and negative likelihood ratios were computed. The overall sample had 416 patients from Germany and England: 144 had cancer and 267 had nonmalignant conditions. Prevalence of depression across the sample was 17.5%. Floor and ceiling effects were rare. Cronbach's alpha coefficients for POS items 7 and 8 summed, GDS-10 and HADS-Depression items varied: 0.61 (heart failure) and 0.80 (cancer). Two items combined (Item 7-feeling depressed and Item 8-feeling good about yourself) consistently presented the highest area under the ROC curve, ranging from 0.76 (95% CI 0.60, 0.93) (Germany, lung cancer) to 0.97 (95% CI 0.91, 1.0) (heart failure), highest negative predictive value, and lowest false negative rate. For the overall sample, the cutoff 2/3 presented a negative predictive value of 89.4% (95% CI 84.7, 92.8) and false negative rate of 10.6 (95% CI 7.2, 15.3). POS items 7 and 8 summed are potentially useful to screen for depression in advanced disease populations. Copyright © 2015 American Academy of Hospice and Palliative Medicine. Published by Elsevier Inc. All rights reserved.

  19. Applicability of Item Response Theory to the Korean Nurses' Licensing Examination

    Directory of Open Access Journals (Sweden)

    Geum-Hee Jeong

    2005-06-01

    Full Text Available To test the applicability of item response theory (IRT to the Korean Nurses' Licensing Examination (KNLE, item analysis was performed after testing the unidimensionality and goodness-of-fit. The results were compared with those based on classical test theory. The results of the 330-item KNLE administered to 12,024 examinees in January 2004 were analyzed. Unidimensionality was tested using DETECT and the goodness-of-fit was tested using WINSTEPS for the Rasch model and Bilog-MG for the two-parameter logistic model. Item analysis and ability estimation were done using WINSTEPS. Using DETECT, Dmax ranged from 0.1 to 0.23 for each subject. The mean square value of the infit and outfit values of all items using WINSTEPS ranged from 0.1 to 1.5, except for one item in pediatric nursing, which scored 1.53. Of the 330 items, 218 (42.7% were misfit using the two-parameter logistic model of Bilog-MG. The correlation coefficients between the difficulty parameter using the Rasch model and the difficulty index from classical test theory ranged from 0.9039 to 0.9699. The correlation between the ability parameter using the Rasch model and the total score from classical test theory ranged from 0.9776 to 0.9984. Therefore, the results of the KNLE fit unidimensionality and goodness-of-fit for the Rasch model. The KNLE should be a good sample for analysis according to the IRT Rasch model, so further research using IRT is possible.

  20. Review and Analysis of Selected Items Management (SIM) Inventory Program Aboard US Surface Ships

    National Research Council Canada - National Science Library

    Axinto, Mark I; Giles, Michael S

    2005-01-01

    .... While SIM items constitute only a small portion of the ship's entire COSAL spare parts inventory, they are critical to the ship's material condition and to its preventive and corrective maintenance programs...

  1. Content marketing - the fundamental tool of digital marketing

    OpenAIRE

    Loredana PATRUTIU BALTES

    2015-01-01

    In the era of digitalization, the importance of digital marketing has increased from one year to another as part of the marketing strategy practiced by organizations of any type and any size. Given that digital marketing requires the existence of a content marketing, the success or the failure of the company’s online communication depends to a significant extent on the quality of its content marketing. In this context, besides promoting a high quality of the content marketing, ...

  2. Digital Media's Transformative Role in Education: Beyond Potential to Essential

    Science.gov (United States)

    Chien, Ming-tso

    2012-01-01

    Achieving effective learning via digital media continues to be a major concern in contemporary education. The daily use of all forms of digital media is part of our lives and therefore becomes a key component of education. Educators must consider the process of digital media curriculum as a learning model and form of experience adapted to…

  3. Deconstructing Digital Natives: Young People, Technology, and the New Literacies

    Science.gov (United States)

    Thomas, Michael, Ed.

    2011-01-01

    There have been many attempts to define the generation of students who emerged with the Web and new digital technologies in the early 1990s. The term "digital native" refers to the generation born after 1980, which has grown up in a world where digital technologies and the internet are a normal part of everyday life. Young people…

  4. Selection of relevant items for decommissioning costing estimation of a PWR using fuzzy logic

    International Nuclear Information System (INIS)

    Monteiro, Deiglys Borges; Busse, Alexander Lucas; Moreira, Joao M.L.; Maiorino, Jose Rubens

    2015-01-01

    The decommissioning is an important part of a nuclear power plant life cycle which may occur by technical, economical or safety reasons. Decommissioning requires carrying out a large number of tasks that should be planned in advance, involves cost evaluations, preparation of plans of activity and actual operational actions. Despite the large number of tasks, only part of them is relevant for cost estimation purpose. The technical literature and international regulatory agencies suggest a variety of methods for decommissioning cost estimation. Most of them require a very detailed knowledge of the plant and data available suitable for plants that are starting their decommissioning but not for those in the planning stage. The present work aims to apply fuzzy logic to sort out relevant items to cost estimation in order to reduce the work effort involved. The scheme uses parametric equations for specific cost items, and is applied to specific parts of the process of nuclear power plant decommissioning. (author)

  5. Selection of relevant items for decommissioning costing estimation of a PWR using fuzzy logic

    Energy Technology Data Exchange (ETDEWEB)

    Monteiro, Deiglys Borges; Busse, Alexander Lucas; Moreira, Joao M.L.; Maiorino, Jose Rubens, E-mail: deiglys.monteiro@ufabc.edu.br, E-mail: alexlucasb@gmail.com, E-mail: joao.moreira@ufabc.edu.br, E-mail: joserubens.maiorino@ufabc.edu.br [Universidade Federal do ABC (CECS/UFABC), Santo Andre, SP (Brazil). Centro de Engenharia, Modelagem e Ciencias Aplicadas. Programa de Pos-Graduacao em Energia e Engenharia da Energia

    2015-07-01

    The decommissioning is an important part of a nuclear power plant life cycle which may occur by technical, economical or safety reasons. Decommissioning requires carrying out a large number of tasks that should be planned in advance, involves cost evaluations, preparation of plans of activity and actual operational actions. Despite the large number of tasks, only part of them is relevant for cost estimation purpose. The technical literature and international regulatory agencies suggest a variety of methods for decommissioning cost estimation. Most of them require a very detailed knowledge of the plant and data available suitable for plants that are starting their decommissioning but not for those in the planning stage. The present work aims to apply fuzzy logic to sort out relevant items to cost estimation in order to reduce the work effort involved. The scheme uses parametric equations for specific cost items, and is applied to specific parts of the process of nuclear power plant decommissioning. (author)

  6. Human error probability evaluation as part of reliability analysis of digital protection system of advanced pressurized water reactor - APR 1400

    International Nuclear Information System (INIS)

    Varde, P. V.; Lee, D. Y.; Han, J. B.

    2003-03-01

    A case of study on human reliability analysis has been performed as part of reliability analysis of digital protection system of the reactor automatically actuates the shutdown system of the reactor when demanded. However, the safety analysis takes credit for operator action as a diverse mean for tripping the reactor for, though a low probability, ATWS scenario. Based on the available information two cases, viz., human error in tripping the reactor and calibration error for instrumentations in protection system, have been analyzed. Wherever applicable a parametric study has also been performed

  7. GEOMETRIC COMPLEXITY ANALYSIS IN AN INTEGRATIVE TECHNOLOGY EVALUATION MODEL (ITEM FOR SELECTIVE LASER MELTING (SLM#

    Directory of Open Access Journals (Sweden)

    S. Merkt

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT: Selective laser melting (SLM is becoming an economically viable choice for manufacturing complex serial parts. This paper focuses on a geometric complexity analysis as part of the integrative technology evaluation model (ITEM presented here. In contrast to conventional evaluation methodologies, the ITEM considers interactions between product and process innovations generated by SLM. The evaluation of manufacturing processes that compete with SLM is the main goal of ITEM. The paper includes a complexity analysis of a test part from Festo AG. The paper closes with a discussion of how the expanded design freedom of SLM can be used to improve company operations, and how the complexity analysis presented here can be seen as a starting point for feature-based complexity analysis..

    AFRIKAANSE OPSOMMING: Selektiewe lasersmelting word geleidelik ’n gangbare ekonomiese keuse vir die vervaar-diging van opeenvolgende komplekse onderdele. Die navorsing is toegespits op die ontleding van meetkundige kompleksiteit as ’n gedeelte van ’n integrerende tegnologiese evalueringsmodel. Gemeet teen konvensionele evalueringsmodelle behandel die genoemde metode interaksies tussen produkte- en prosesinnovasies wat gegenereer word. Die navorsing behandel ’n kompleksiteitsontleding van ’n toetsonderdeel van die firma FESTO AG. Die resultaat toon hoe kompleksiteits-analise gebruik kan word as die vertrekpunt vir eienskapsgebaseerde analise.

  8. Newly Qualified Teachers' Professional Digital Competence: Implications for Teacher Education

    Science.gov (United States)

    Gudmundsdottir, Greta Björk; Hatlevik, Ove Edvard

    2018-01-01

    The professional digital competence (PDC) of teachers is of growing importance in classrooms, now that digital resources and digital media are becoming important parts of teachers' everyday practice. This study explores how newly qualified teachers are prepared to use information and communication technology (ICT) in their initial teacher…

  9. Digital Collections, Digital Libraries & the Digitization of Cultural Heritage Information.

    Science.gov (United States)

    Lynch, Clifford

    2002-01-01

    Discusses digital collections and digital libraries. Topics include broadband availability; digital rights protection; content, both non-profit and commercial; digitization of cultural content; sustainability; metadata harvesting protocol; infrastructure; authorship; linking multiple resources; data mining; digitization of reference works;…

  10. H. Sapiens Digital: From Digital Immigrants and Digital Natives to Digital Wisdom

    Science.gov (United States)

    Prensky, Marc

    2009-01-01

    As we move further into the 21st century, the digital native/digital immigrant paradigm created by Marc Prensky in 2001 is becoming less relevant. In this article, Prensky suggests that we should focus instead on the development of what he calls "digital wisdom." Arguing that digital technology can make us not just smarter but truly wiser, Prensky…

  11. Digital Games and Learning: Identifying Pathways of Influence

    Science.gov (United States)

    Subrahmanyam, Kaveri; Renukarya, Bhavya

    2015-01-01

    Digital games and gamelike contexts have become an integral part of young people's lives, and scholars have speculated about their potential to engage and enhance children's learning. Given that digital games are complex systems, we propose that different aspects of game features and game play might influence learning in different ways. Drawing on…

  12. The Effects of Test Length and Sample Size on Item Parameters in Item Response Theory

    Science.gov (United States)

    Sahin, Alper; Anil, Duygu

    2017-01-01

    This study investigates the effects of sample size and test length on item-parameter estimation in test development utilizing three unidimensional dichotomous models of item response theory (IRT). For this purpose, a real language test comprised of 50 items was administered to 6,288 students. Data from this test was used to obtain data sets of…

  13. Results of wholesomeness test on basic plan of research and development of food irradiation (7 items)

    International Nuclear Information System (INIS)

    Furuya, Tsuyoshi

    1989-01-01

    Twenty years have elapsed since the general research on food irradiation was begun in Japan as the new technology for food preservation, and the research on the wholesomeness of irradiated foods has been carried out in wide range together with the research on irradiation effect, irradiation techniques and economical efficiency. The wholesomeness of irradiated foods includes chronic toxicity including carcinogenic property in the continuous intake for long period, the effect to reproduction function over many generations and the possibility of giving hereditary injury to cells, the nutritional adequacy required for the sustenance of life and the increase of health, and microbiological safety. In Japan, the research on food irradiation was designated as an atomic energy specific general research, and as the objects of research, potato and onion for the prevention of germination, rice and wheat for the protection from noxious insects, fish paste products, wienerwurst and mandarin orange for sterilization were selected. For the irradiation, Co-60 gamma ray was used except the case of mandarin orange using electron beam. The research on all 7 items was finished, and the irradiation of potato was permitted. (K.I.)

  14. Evaluating the healthiness of chain-restaurant menu items using crowdsourcing: a new method.

    Science.gov (United States)

    Lesser, Lenard I; Wu, Leslie; Matthiessen, Timothy B; Luft, Harold S

    2017-01-01

    To develop a technology-based method for evaluating the nutritional quality of chain-restaurant menus to increase the efficiency and lower the cost of large-scale data analysis of food items. Using a Modified Nutrient Profiling Index (MNPI), we assessed chain-restaurant items from the MenuStat database with a process involving three steps: (i) testing 'extreme' scores; (ii) crowdsourcing to analyse fruit, nut and vegetable (FNV) amounts; and (iii) analysis of the ambiguous items by a registered dietitian. In applying the approach to assess 22 422 foods, only 3566 could not be scored automatically based on MenuStat data and required further evaluation to determine healthiness. Items for which there was low agreement between trusted crowd workers, or where the FNV amount was estimated to be >40 %, were sent to a registered dietitian. Crowdsourcing was able to evaluate 3199, leaving only 367 to be reviewed by the registered dietitian. Overall, 7 % of items were categorized as healthy. The healthiest category was soups (26 % healthy), while desserts were the least healthy (2 % healthy). An algorithm incorporating crowdsourcing and a dietitian can quickly and efficiently analyse restaurant menus, allowing public health researchers to analyse the healthiness of menu items.

  15. Development of a subjective cognitive decline questionnaire using item response theory: a pilot study.

    Science.gov (United States)

    Gifford, Katherine A; Liu, Dandan; Romano, Raymond; Jones, Richard N; Jefferson, Angela L

    2015-12-01

    Subjective cognitive decline (SCD) may indicate unhealthy cognitive changes, but no standardized SCD measurement exists. This pilot study aims to identify reliable SCD questions. 112 cognitively normal (NC, 76±8 years, 63% female), 43 mild cognitive impairment (MCI; 77±7 years, 51% female), and 33 diagnostically ambiguous participants (79±9 years, 58% female) were recruited from a research registry and completed 57 self-report SCD questions. Psychometric methods were used for item-reduction. Factor analytic models assessed unidimensionality of the latent trait (SCD); 19 items were removed with extreme response distribution or trait-fit. Item response theory (IRT) provided information about question utility; 17 items with low information were dropped. Post-hoc simulation using computerized adaptive test (CAT) modeling selected the most commonly used items (n=9 of 21 items) that represented the latent trait well (r=0.94) and differentiated NC from MCI participants (F(1,146)=8.9, p=0.003). Item response theory and computerized adaptive test modeling identified nine reliable SCD items. This pilot study is a first step toward refining SCD assessment in older adults. Replication of these findings and validation with Alzheimer's disease biomarkers will be an important next step for the creation of a SCD screener.

  16. Digital Collections, Digital Libraries and the Digitization of Cultural Heritage Information.

    Science.gov (United States)

    Lynch, Clifford

    2002-01-01

    Discusses the development of digital collections and digital libraries. Topics include digitization of cultural heritage information; broadband issues; lack of compelling content; training issues; types of materials being digitized; sustainability; digital preservation; infrastructure; digital images; data mining; and future possibilities for…

  17. Approximation Preserving Reductions among Item Pricing Problems

    Science.gov (United States)

    Hamane, Ryoso; Itoh, Toshiya; Tomita, Kouhei

    When a store sells items to customers, the store wishes to determine the prices of the items to maximize its profit. Intuitively, if the store sells the items with low (resp. high) prices, the customers buy more (resp. less) items, which provides less profit to the store. So it would be hard for the store to decide the prices of items. Assume that the store has a set V of n items and there is a set E of m customers who wish to buy those items, and also assume that each item i ∈ V has the production cost di and each customer ej ∈ E has the valuation vj on the bundle ej ⊆ V of items. When the store sells an item i ∈ V at the price ri, the profit for the item i is pi = ri - di. The goal of the store is to decide the price of each item to maximize its total profit. We refer to this maximization problem as the item pricing problem. In most of the previous works, the item pricing problem was considered under the assumption that pi ≥ 0 for each i ∈ V, however, Balcan, et al. [In Proc. of WINE, LNCS 4858, 2007] introduced the notion of “loss-leader, ” and showed that the seller can get more total profit in the case that pi < 0 is allowed than in the case that pi < 0 is not allowed. In this paper, we derive approximation preserving reductions among several item pricing problems and show that all of them have algorithms with good approximation ratio.

  18. Which Statistic Should Be Used to Detect Item Preknowledge When the Set of Compromised Items Is Known?

    Science.gov (United States)

    Sinharay, Sandip

    2017-09-01

    Benefiting from item preknowledge is a major type of fraudulent behavior during educational assessments. Belov suggested the posterior shift statistic for detection of item preknowledge and showed its performance to be better on average than that of seven other statistics for detection of item preknowledge for a known set of compromised items. Sinharay suggested a statistic based on the likelihood ratio test for detection of item preknowledge; the advantage of the statistic is that its null distribution is known. Results from simulated and real data and adaptive and nonadaptive tests are used to demonstrate that the Type I error rate and power of the statistic based on the likelihood ratio test are very similar to those of the posterior shift statistic. Thus, the statistic based on the likelihood ratio test appears promising in detecting item preknowledge when the set of compromised items is known.

  19. An emotional functioning item bank of 24 items for computerized adaptive testing (CAT) was established

    DEFF Research Database (Denmark)

    Petersen, Morten Aa.; Gamper, Eva-Maria; Costantini, Anna

    2016-01-01

    of the widely used EORTC Quality of Life questionnaire (QLQ-C30). STUDY DESIGN AND SETTING: On the basis of literature search and evaluations by international samples of experts and cancer patients, 38 candidate items were developed. The psychometric properties of the items were evaluated in a large...... international sample of cancer patients. This included evaluations of dimensionality, item response theory (IRT) model fit, differential item functioning (DIF), and of measurement precision/statistical power. RESULTS: Responses were obtained from 1,023 cancer patients from four countries. The evaluations showed...... that 24 items could be included in a unidimensional IRT model. DIF did not seem to have any significant impact on the estimation of EF. Evaluations indicated that the CAT measure may reduce sample size requirements by up to 50% compared to the QLQ-C30 EF scale without reducing power. CONCLUSION...

  20. The Digital Memory of CERN: status and input for a Preservation Strategic Plan

    CERN Document Server

    Le Meur, Jean-Yves

    2016-01-01

    The Digital Memory project is born from the repetitive observation over decades that a fraction of CERN knowledge is lost or threaten to be lost. If a good part is kept in safe systems where long term preservation is ”in the pipeline” - but rarely fully implemented - another part is not managed for archiving. CERN Digital Memory targets to create incentives for a more consistent and robust solution to guarantee the long term preservation of content by existing information systems, as well as a new approach to collect missing content worth been transmitted to future generations. The first part of this document overviews digital preservation in the world, looking at rationale, world wide evolution and best practices. The second chapter describes past initiatives started at CERN and what has been recommended to ensure a safer preservation of CERN-produced digital assets. Finally, the last section exposes proposals to evolve existing information systems and to set up innovative processes to make digital prese...

  1. Factoring handedness data: I. Item analysis.

    Science.gov (United States)

    Messinger, H B; Messinger, M I

    1995-12-01

    Recently in this journal Peters and Murphy challenged the validity of factor analyses done on bimodal handedness data, suggesting instead that right- and left-handers be studied separately. But bimodality may be avoidable if attention is paid to Oldfield's questionnaire format and instructions for the subjects. Two characteristics appear crucial: a two-column LEFT-RIGHT format for the body of the instrument and what we call Oldfield's Admonition: not to indicate strong preference for handedness item, such as write, unless "... the preference is so strong that you would never try to use the other hand unless absolutely forced to...". Attaining unimodality of an item distribution would seem to overcome the objections of Peters and Murphy. In a 1984 survey in Boston we used Oldfield's ten-item questionnaire exactly as published. This produced unimodal item distributions. With reflection of the five-point item scale and a logarithmic transformation, we achieved a degree of normalization for the items. Two surveys elsewhere based on Oldfield's 20-item list but with changes in the questionnaire format and the instructions, yielded markedly different item distributions with peaks at each extreme and sometimes in the middle as well.

  2. Fault tolerant digital control systems for boiling water reactors

    International Nuclear Information System (INIS)

    Chakraborty, S.; Cash, N.R.

    1986-01-01

    In a Boiling Water Reactor nuclear power plant, the power generation control function is divided into several systems, each system controlling only a part of the total plant. Presently, each system is controlled by conventional analog or digital logic circuits with little interaction for coordinated control. The advent of microprocessors has allowed the development of distributed fault-tolerant digital controls. The objective is to replace these conventional controls with fault-tolerant digital controls connected together with digital communication links to form a fully integrated nuclear power plant control system

  3. A simple experiment with Microsoft Office 2010 and Windows 7 utilizing digital forensic methodology

    Directory of Open Access Journals (Sweden)

    Gregory H. Carlton

    2013-03-01

    Full Text Available Digital forensic examiners are tasked with retrieving data from digital storage devices, and frequently these examiners are expected to explain the circumstances that led to the data being in its current state. Through written reports or verbal, expert testimony delivered in court, digital forensic examiners are expected to describe whether data have been altered, and if so, then to what extent have data been altered. Addressing these expectations results from opinions digital forensic examiners reach concerning their understanding of electronic storage and retrieval methods. The credibility of these opinions evolves from the scientific basis from which they are drawn using forensic methodology.   Digital forensic methodology, being a scientific process, is derived from observations and repeatable findings in controlled environments. Furthermore, scientific research methods have established that causal conclusions can be drawn only when observed in controlled experiments. With this in mind, it seems beneficial that digital forensic examiners have a library of experiments from which they can perform, observe results, and derive conclusions. After having conducted an experiment on a specific topic, a digital forensic examiner will be in a better position to express with confidence the state of the current data and perhaps the conditions that led to its current state.   This study provides a simple experiment using the contemporary versions of the most widely used software applications running on the most commonly installed operation system. Here, using the Microsoft Office 2010 applications, a simple Word document, an Excel spreadsheet, a PowerPoint presentation, and an Access database are created and then modified. A forensic analysis is performed to determine the extent in which the changes to the data are identified. The value in this study is not that it yields new forensic analysis techniques, but rather that it illustrates a

  4. Item Modeling Concept Based on Multimedia Authoring

    Directory of Open Access Journals (Sweden)

    Janez Stergar

    2008-09-01

    Full Text Available In this paper a modern item design framework for computer based assessment based on Flash authoring environment will be introduced. Question design will be discussed as well as the multimedia authoring environment used for item modeling emphasized. Item type templates are a structured means of collecting and storing item information that can be used to improve the efficiency and security of the innovative item design process. Templates can modernize the item design, enhance and speed up the development process. Along with content creation, multimedia has vast potential for use in innovative testing. The introduced item design template is based on taxonomy of innovative items which have great potential for expanding the content areas and construct coverage of an assessment. The presented item design approach is based on GUI's – one for question design based on implemented item design templates and one for user interaction tracking/retrieval. The concept of user interfaces based on Flash technology will be discussed as well as implementation of the innovative approach of the item design forms with multimedia authoring. Also an innovative method for user interaction storage/retrieval based on PHP extending Flash capabilities in the proposed framework will be introduced.

  5. The medial temporal lobes distinguish between within-item and item-context relations during autobiographical memory retrieval.

    Science.gov (United States)

    Sheldon, Signy; Levine, Brian

    2015-12-01

    During autobiographical memory retrieval, the medial temporal lobes (MTL) relate together multiple event elements, including object (within-item relations) and context (item-context relations) information, to create a cohesive memory. There is consistent support for a functional specialization within the MTL according to these relational processes, much of which comes from recognition memory experiments. In this study, we compared brain activation patterns associated with retrieving within-item relations (i.e., associating conceptual and sensory-perceptual object features) and item-context relations (i.e., spatial relations among objects) with respect to naturalistic autobiographical retrieval. We developed a novel paradigm that cued participants to retrieve information about past autobiographical events, non-episodic within-item relations, and non-episodic item-context relations with the perceptuomotor aspects of retrieval equated across these conditions. We used multivariate analysis techniques to extract common and distinct patterns of activity among these conditions within the MTL and across the whole brain, both in terms of spatial and temporal patterns of activity. The anterior MTL (perirhinal cortex and anterior hippocampus) was preferentially recruited for generating within-item relations later in retrieval whereas the posterior MTL (posterior parahippocampal cortex and posterior hippocampus) was preferentially recruited for generating item-context relations across the retrieval phase. These findings provide novel evidence for functional specialization within the MTL with respect to naturalistic memory retrieval. © 2015 Wiley Periodicals, Inc.

  6. Uso de digital em idosos admitidos em unidade de geriatria de um hospital geral

    Directory of Open Access Journals (Sweden)

    Cunha Ulisses Gabriel de Vasconcelos

    1998-01-01

    Full Text Available OBJETVO: Detectar a freqüência da prescrição do digital, assim como as suas indicações, em idosos admitidos em unidade de geriatria de um hospital geral. MÉTODOS: Foram investigados, consecutivamente, 130 pacientes não selecionados, de ambos os sexos (100 mulheres e 30 homens, com idades > ou = 65 (média 80±9 anos. Os pacientes foram avaliados através de exame clínico completo, rotina básica de sangue, radiografia simples de tórax, eletrocardiograma e ecocardiograma Doppler. Baseados na avaliação clínica e exames complementares, o uso do digital foi considerado adequado, questionável ou inadequado. RESULTADOS: Estavam em uso de digital 27,6% dos pacientes. A indicação foi considerada adequada em 36,1%, questionável em 11,1% e inadequada em 52,7%. CONCLUSÃO: Uma alta prevalência de prescrição do digital foi detectada nos idosos admitidos, sendo que a maior parte a adotava por razões consideradas inadequadas ou questionáveis. Devido ao risco aumentado de intoxicação digitálica nessa faixa etária, a droga deveria ser prescrita sob indicações mais criteriosas.

  7. On Using Current Steering Logic in Mixed Analogue-digital Circuits

    DEFF Research Database (Denmark)

    Lehmann, Torsten

    1998-01-01

    The authors investigate power supply noise in mixed analogue-digital circuits, arising from communication between the analogue and digital parts of the circuit. Current steering techniques and proper buffering are used to show which noise currents can be reduced and which cannot. In addition......, a high-swing current steering buffer for driving analogue switches or external digital signals is proposed....

  8. Differential item functioning of the patient-reported outcomes information system (PROMIS®) pain interference item bank by language (Spanish versus English).

    Science.gov (United States)

    Paz, Sylvia H; Spritzer, Karen L; Reise, Steven P; Hays, Ron D

    2017-06-01

    About 70% of Latinos, 5 years old or older, in the United States speak Spanish at home. Measurement equivalence of the PROMIS ® pain interference (PI) item bank by language of administration (English versus Spanish) has not been evaluated. A sample of 527 adult Spanish-speaking Latinos completed the Spanish version of the 41-item PROMIS ® pain interference item bank. We evaluate dimensionality, monotonicity and local independence of the Spanish-language items. Then we evaluate differential item functioning (DIF) using ordinal logistic regression with item response theory scores estimated from DIF-free "anchor" items. One of the 41 items in the Spanish version of the PROMIS ® PI item bank was identified as having significant uniform DIF. English- and Spanish-speaking subjects with the same level of pain interference responded differently to 1 of the 41 items in the PROMIS ® PI item bank. This item was not retained due to proprietary issues. The original English language item parameters can be used when estimating PROMIS ® PI scores.

  9. Geologic map of outcrop areas of sedimentary units in the eastern part of the Hailey 1 degree x 2 degrees quadrangle and part of the southern part of the Challis 1 degree x 2 degrees quadrangle, south-central Idaho

    Science.gov (United States)

    Link, P.K.; Mahoney, J.B.; Bruner, D.J.; Batatian, L.D.; Wilson, Eric; Williams, F.J.C.

    1995-01-01

    The paper version of the Geologic map of outcrop areas of sedimentary units in the eastern part of the Hailey 1x2 Quadrangle and part of the southern part of the Challis 1x2 Quadrangle, south-central Idaho was compiled by Paul Link and others in 1995. The plate was compiled on a 1:100,000 scale topographic base map. TechniGraphic System, Inc. of Fort Collins Colorado digitized this map under contract for N.Shock. G.Green edited and prepared the digital version for publication as a GIS database. The digital geologic map database can be queried in many ways to produce a variety of geologic maps.

  10. Digital instrumentation and dead-time processing for radionuclide metrology

    International Nuclear Information System (INIS)

    Censier, B.; Bobin, Ch.; Bouchard, J.

    2010-01-01

    Most of the acquisition chains used in radionuclide metrology are based on NIM modules. These analogue setups have been thoroughly tested for decades now, becoming a reference in the field. Nevertheless, the renewal of ageing modules and the need for extra features both call for the development of new acquisition schemes based on digital processing. In this article, several technologies usable for instrumentation are first presented. A review of past and present projects is made in the second part, highlighting the fundamental role of dead-time management. The last part is dedicated to the description of two digital systems developed at LNE-LNHB. The first one has been designed for the instrumentation of a NaI(Tl) well-type crystal set-up, while the second one is used for the management of three photomultipliers in the framework of the TDCR method and as a part of the development of a digital platform for coincidence counting. (authors)

  11. A strategy for optimizing item-pool management

    NARCIS (Netherlands)

    Ariel, A.; van der Linden, Willem J.; Veldkamp, Bernard P.

    2006-01-01

    Item-pool management requires a balancing act between the input of new items into the pool and the output of tests assembled from it. A strategy for optimizing item-pool management is presented that is based on the idea of a periodic update of an optimal blueprint for the item pool to tune item

  12. Digital bedrock geologic map of the Gilson Mountain quadrangle,�Vermont

    Data.gov (United States)

    Vermont Center for Geographic Information — Digital Data from VG95-7A Doolan, B, 1995,�Digital bedrock geologic map of the Gilson Mountain quadrangle,�Vermont: VGS Open-File Report VG95-7A, 2 plates, scale...

  13. SPIN. First Digital Protection System Feedback of experience ... ... after 30 years

    International Nuclear Information System (INIS)

    Kosicki, M.; Pacuta, J.; Kamga, J.; Burel, J.-P.

    2010-01-01

    In this lecture Mr Burel presents experience with the software SPIN - the first digital protection system feedback. After thirty years of operation, the results are positive: - System is in correct operation and still maintained with spare parts available; - No spurious trip or actuation due to the system itself. A project for modernization is prepared to replace the digital part with a new digital technology designed with today's: - Components (SPINLINE 3); - methods and tools (Software development); - Standards (EMI/RFI - qualification), in order to allow customer to add some new functional needs and to keep the system in operation for thirty more years.

  14. A psychometric evaluation of the digital logic concept inventory

    Science.gov (United States)

    Herman, Geoffrey L.; Zilles, Craig; Loui, Michael C.

    2014-10-01

    Concept inventories hold tremendous promise for promoting the rigorous evaluation of teaching methods that might remedy common student misconceptions and promote deep learning. The measurements from concept inventories can be trusted only if the concept inventories are evaluated both by expert feedback and statistical scrutiny (psychometric evaluation). Classical Test Theory and Item Response Theory provide two psychometric frameworks for evaluating the quality of assessment tools. We discuss how these theories can be applied to assessment tools generally and then apply them to the Digital Logic Concept Inventory (DLCI). We demonstrate that the DLCI is sufficiently reliable for research purposes when used in its entirety and as a post-course assessment of students' conceptual understanding of digital logic. The DLCI can also discriminate between students across a wide range of ability levels, providing the most information about weaker students' ability levels.

  15. Lawton IADL scale in dementia: can item response theory make it more informative?

    Science.gov (United States)

    McGrory, Sarah; Shenkin, Susan D; Austin, Elizabeth J; Starr, John M

    2014-07-01

    impairment of functional abilities represents a crucial component of dementia diagnosis. Current functional measures rely on the traditional aggregate method of summing raw scores. While this summary score provides a quick representation of a person's ability, it disregards useful information on the item level. to use item response theory (IRT) methods to increase the interpretive power of the Lawton Instrumental Activities of Daily Living (IADL) scale by establishing a hierarchy of item 'difficulty' and 'discrimination'. this cross-sectional study applied IRT methods to the analysis of IADL outcomes. Participants were 202 members of the Scottish Dementia Research Interest Register (mean age = 76.39, range = 56-93, SD = 7.89 years) with complete itemised data available. a Mokken scale with good reliability (Molenaar Sijtsama statistic 0.79) was obtained, satisfying the IRT assumption that the items comprise a single unidimensional scale. The eight items in the scale could be placed on a hierarchy of 'difficulty' (H coefficient = 0.55), with 'Shopping' being the most 'difficult' item and 'Telephone use' being the least 'difficult' item. 'Shopping' was the most discriminatory item differentiating well between patients of different levels of ability. IRT methods are capable of providing more information about functional impairment than a summed score. 'Shopping' and 'Telephone use' were identified as items that reveal key information about a patient's level of ability, and could be useful screening questions for clinicians. © The Author 2013. Published by Oxford University Press on behalf of the British Geriatrics Society. All rights reserved. For Permissions, please email: journals.permissions@ oup.com.

  16. Refinement of the Brazilian Household Food Insecurity Measurement Scale: Recommendation for a 14-item EBIA

    Directory of Open Access Journals (Sweden)

    Ana Maria Segall-Corrêa

    2014-04-01

    Full Text Available OBJECTIVE: To review and refine Brazilian Household Food Insecurity Measurement Scale structure. METHODS: The study analyzed the impact of removing the item "adult lost weight" and one of two possibly redundant items on Brazilian Household Food Insecurity Measurement Scale psychometric behavior using the one-parameter logistic (Rasch model. Brazilian Household Food Insecurity Measurement Scale psychometric behavior was analyzed with respect to acceptable adjustment values ranging from 0.7 to 1.3, and to severity scores of the items with theoretically expected gradients. The socioeconomic and food security indicators came from the 2004 National Household Sample Survey, which obtained complete answers to Brazilian Household Food Insecurity Measurement Scale items from 112,665 households. RESULTS: Removing the items "adult reduced amount..." followed by "adult ate less..." did not change the infit of the remaining items, except for "adult lost weight", whose infit increased from 1.21 to 1.56. The internal consistency and item severity scores did not change when "adult ate less" and one of the two redundant items were removed. CONCLUSION: Brazilian Household Food Insecurity Measurement Scale reanalysis reduced the number of scale items from 16 to 14 without changing its internal validity. Its use as a nationwide household food security measure is strongly recommended.

  17. Digital literacy and problem solving in technology-rich environments

    Directory of Open Access Journals (Sweden)

    Vesna Dolničar

    2015-07-01

    Full Text Available Rapid development and progress, as well as the growing presence of information and communications technologies dictate the need for more highly developed digital skills in individuals. The paper focuses on the concepts of digital skills and problem solving in technology-rich environments. It examines these on the basis of empirical data obtained in the international study PIAAC. The introductory part presents an overview of the literature and the results of previous research in the field of measurement of digital skills, and data on the use of information society services among the EU Member States. The second part of the article refers to the results obtained in the study PIAAC. The results, confirmed by the results of other studies, showed the impact of age and education level on the problem solving in technology-rich environments. Article concludes with suggestions for improving the current state of integration of all population groups in training programs in the field of digital skills.

  18. Digital radiography in the evaluation of oesophageal motility disorders

    Energy Technology Data Exchange (ETDEWEB)

    Aly, Yehia A

    2000-07-01

    AIMS: To develop a simple technique for examination of the oesophagus by digital radiography and to assess its role in the evaluation of motility disorders of the oesophagus. MATERIALS AND METHODS: Forty-nine patients and 44 control subjects underwent manometry and digital examination of the oesophagus. The digital study consisted of two parts: firstly examination of the pharynx and cervical oesophagus using 15 ml of fluid barium in anterio-posterior (AP) and lateral views, with image acquisition of four frames/s for 2 s. Secondly, examination of the thoracic oesophagus and oesophagogastric junction using 25 ml of barium in two prone oblique and one supine AP series, with image acquisition of one frame/s for 20 s. Oesophageal transit time (OTT) was measured in each case. Abnormal or non-peristaltic contractions were described regarding their morphology, time of visualization and length. The presence or absence of hiatal hernia, reflux or any associated organic lesions was noted. RESULTS: Digital radiography diagnosed 14 cases of achalasia and 28 cases of non-specific oesophageal motility disorder (NOMD). Normal OTT was 11.95 {+-} 1.304 s. The OTT was prolonged (16 s or more) in all patients except five; four of these were cases of NOMD. Abnormal contractions were classified into circular and longitudinal types. The circular non-obliterating type was commoner. Achalasia was diagnosed in all cases, as failure of relaxation of the inferior oesophageal sphincter was always present and easily depicted by digital radiography. Abnormal contractions in the body of the oesophagus were elicited in 57% of cases of achalasia. The sensitivity of digital radiography in detecting oesophageal motility disorders was 85.7% based on the presence of abnormal contractions and 91.6% by eliciting a prolonged OTT. CONCLUSIONS: Examination of the oesophagus by digital radiography is simple, non-invasive, reproducible, rapid and without discomfort to patients. It allows the diagnosis of

  19. Digital radiography in the evaluation of oesophageal motility disorders

    International Nuclear Information System (INIS)

    Aly, Yehia A.

    2000-01-01

    AIMS: To develop a simple technique for examination of the oesophagus by digital radiography and to assess its role in the evaluation of motility disorders of the oesophagus. MATERIALS AND METHODS: Forty-nine patients and 44 control subjects underwent manometry and digital examination of the oesophagus. The digital study consisted of two parts: firstly examination of the pharynx and cervical oesophagus using 15 ml of fluid barium in anterio-posterior (AP) and lateral views, with image acquisition of four frames/s for 2 s. Secondly, examination of the thoracic oesophagus and oesophagogastric junction using 25 ml of barium in two prone oblique and one supine AP series, with image acquisition of one frame/s for 20 s. Oesophageal transit time (OTT) was measured in each case. Abnormal or non-peristaltic contractions were described regarding their morphology, time of visualization and length. The presence or absence of hiatal hernia, reflux or any associated organic lesions was noted. RESULTS: Digital radiography diagnosed 14 cases of achalasia and 28 cases of non-specific oesophageal motility disorder (NOMD). Normal OTT was 11.95 ± 1.304 s. The OTT was prolonged (16 s or more) in all patients except five; four of these were cases of NOMD. Abnormal contractions were classified into circular and longitudinal types. The circular non-obliterating type was commoner. Achalasia was diagnosed in all cases, as failure of relaxation of the inferior oesophageal sphincter was always present and easily depicted by digital radiography. Abnormal contractions in the body of the oesophagus were elicited in 57% of cases of achalasia. The sensitivity of digital radiography in detecting oesophageal motility disorders was 85.7% based on the presence of abnormal contractions and 91.6% by eliciting a prolonged OTT. CONCLUSIONS: Examination of the oesophagus by digital radiography is simple, non-invasive, reproducible, rapid and without discomfort to patients. It allows the diagnosis of

  20. Smaller food item sizes of snack foods influence reduced portions and caloric intake in young adults.

    Science.gov (United States)

    Marchiori, David; Waroquier, Laurent; Klein, Olivier

    2011-05-01

    Studies considering the impact of food-size variations on consumption have predominantly focused on portion size, whereas very little research has investigated variations in food-item size, especially at snacking occasions, and results have been contradictory. This study evaluated the effect of altering the size of food items (ie, small vs large candies) of equal-size food portions on short-term energy intake while snacking. The study used a between-subjects design (n=33) in a randomized experiment conducted in spring 2008. In a psychology laboratory (separate cubicles), participants (undergraduate psychology students, 29 of 33 female, mean age 20.3±2 years, mean body mass index 21.7±3.7) were offered unlimited consumption of candies while participating in an unrelated computerized experiment. For half of the subjects, items were cut in two to make the small food-item size. Food intake (weight in grams, kilocalories, and number of food items) was examined using analysis of variance. Results showed that decreasing the item size of candies led participants to decrease by half their gram weight intake, resulting in an energy intake decrease of 60 kcal compared to the other group. Appetite ratings and subject and food characteristics had no moderating effect. A cognitive bias could explain why people tend to consider that one unit of food (eg, 10 candies) is the appropriate amount to consume, regardless of the size of the food items in the unit. This study suggests a simple dietary strategy, decreasing food-item size without having to alter the portion size offered, may reduce energy intake at snacking occasions. Copyright © 2011 American Dietetic Association. Published by Elsevier Inc. All rights reserved.

  1. Explanatory item response modelling of an abstract reasoning assessment: A case for modern test design

    OpenAIRE

    Helland, Fredrik

    2016-01-01

    Assessment is an integral part of society and education, and for this reason it is important to know what you measure. This thesis is about explanatory item response modelling of an abstract reasoning assessment, with the objective to create a modern test design framework for automatic generation of valid and precalibrated items of abstract reasoning. Modern test design aims to strengthen the connections between the different components of a test, with a stress on strong theory, systematic it...

  2. Commercial grade item (CGI) dedication of generators for nuclear safety related applications

    International Nuclear Information System (INIS)

    Das, R.K.; Hajos, L.G.

    1993-01-01

    The number of nuclear safety related equipment suppliers and the availability of spare and replacement parts designed specifically for nuclear safety related application are shrinking rapidly. These have made it necessary for utilities to apply commercial grade spare and replacement parts in nuclear safety related applications after implementing proper acceptance and dedication process to verify that such items conform with the requirements of their use in nuclear safety related application. The general guidelines for the commercial grade item (CGI) acceptance and dedication are provided in US Nuclear Regulatory Commission (NRC) Generic Letters and Electric Power Research Institute (EPRI) Report NP-5652, Guideline for the Utilization of Commercial Grade Items in Nuclear Safety Related Applications. This paper presents an application of these generic guidelines for procurement, acceptance, and dedication of a commercial grade generator for use as a standby generator at Salem Generating Station Units 1 and 2. The paper identifies the critical characteristics of the generator which once verified, will provide reasonable assurance that the generator will perform its intended safety function. The paper also delineates the method of verification of the critical characteristics through tests and provide acceptance criteria for the test results. The methodology presented in this paper may be used as specific guidelines for reliable and cost effective procurement and dedication of commercial grade generators for use as standby generators at nuclear power plants

  3. The Photoshop Smile Design technique (part 1): digital dental photography.

    Science.gov (United States)

    McLaren, Edward A; Garber, David A; Figueira, Johan

    2013-01-01

    The proliferation of digital photography and imaging devices is enhancing clinicians' ability to visually document patients' intraoral conditions. By understanding the elements of esthetics and learning how to incorporate technology applications into clinical dentistry, clinicians can predictably plan smile design and communicate anticipated results to patients and ceramists alike. This article discusses camera, lens, and flash selection and setup, and how to execute specific types of images using the Adobe Photoshop Smile Design (PSD) technique.

  4. Innovative generativity of digital service encounters

    DEFF Research Database (Denmark)

    Henten, Anders; Sørensen, Jannick Kirk

    2018-01-01

    The research question examined in this chapter is how service encounters, based on digital interfaces, differ from face-to-face (f2f) encounters in terms of potential innovative generativity. New computer technologies facilitating big data processing and the development of advanced recommender...... systems and the recent developments of artificial intelligence with respect to cognitive and affective computing will certainly enhance the potential for innovations to be created on the basis of digital service encounters. However, the empathetic understanding of the needs and wants of the service users...... that can be part of the f2f service encounters cannot automatically result from digital service encounters. Digital tools can be developed and used to supplement the impressions that f2f encounters initiate. However, human interpretations and even human f2f encounters will also be needed to maintain...

  5. Digital Social Science Lab

    DEFF Research Database (Denmark)

    Svendsen, Michael; Lauersen, Christian Ulrich

    2015-01-01

    At the Faculty Library of Social Sciences (part of Copenhagen University Library) we are currently working intensely towards the establishment of a Digital Social Science Lab (DSSL). The purpose of the lab is to connect research, education and learning processes with the use of digital tools...... at the Faculty of Social Sciences. DSSL will host and facilitate an 80 m2 large mobile and intelligent study- and learning environment with a focus on academic events, teaching and collaboration. Besides the physical settings DSSL has two primary functions: 1. To implement relevant social scientific software...... and hardware at the disposal for students and staff at The Faculty of Social Sciences along with instruction and teaching in the different types of software, e.g. Stata, Nvivo, Atlas.ti, R Studio, Zotero and GIS-software. 2. To facilitate academic events focusing on use of digital tools and analytic software...

  6. Problematizing Digital Research Evaluation using DOIs in Practice-Based Arts, Humanities and Social Science Research [v1; ref status: indexed, http://f1000r.es/5dy

    Directory of Open Access Journals (Sweden)

    Muriel Swijghuisen Reigersberg

    2015-07-01

    Full Text Available This paper explores emerging practices in research data management in the arts, humanities and social sciences (AHSS. It will do so vis-à-vis current citation conventions and impact measurement for research in AHSS. Case study findings on research data inventoried at Goldsmiths’, University of London will be presented. Goldsmiths is a UK research-intensive higher education institution which specialises in arts, humanities and social science research. The paper’s aim is to raise awareness of the subject-specific needs of AHSS scholars to help inform the design of future digital tools for impact analysis in AHSS. Firstly, I shall explore the definition of research data and how it is currently understood by AHSS researchers. I will show why many researchers choose not to engage with digital dissemination techniques and ORCID. This discussion must necessarily include the idea that practice-based and applied AHSS research are processes which are not easily captured in numerical ‘sets’ and cannot be labelled electronically without giving careful consideration to what a group or data item ‘represents’ as part of the academic enquiry, and therefore how it should be cited and analysed as part of any impact assessment. Then, the paper will explore: the role of the monograph and arts catalogue in AHSS scholarship; how citation practices and digital impact measurement in AHSS currently operate in relation to authorship and how digital identifiers may hypothetically impact on metrics, intellectual property (IP, copyright and research integrity issues in AHSS. I will also show that, if we are to be truly interdisciplinary, as research funders and strategic thinkers say we should, it is necessary to revise the way we think about digital research dissemination. This will involve breaking down the boundaries between AHSS and other types of research.

  7. Guidelines for the technical evaluation of replacement items in nuclear power plants (NCIG-11)

    International Nuclear Information System (INIS)

    Craig, W.E.; Fakhar, A.A.; Shulman, M.N.

    1989-12-01

    This document presents guidelines and supporting information for the technical evaluation of replacement items in nuclear power plants. These guidelines contain six major sections which provide the practical knowledge and a programmatic approach to determine the technical and quality requirements necessary to generate purchase documents to procure the proper replacement items. The technical evaluation methodology includes the following steps. (1) Identification of the need for a technical evaluation. (2) Component/part functional classification procedures. (3) Performance of a Failure Modes and Effects Analysis. (4) Selection of Critical Characteristics for Design Determination. (5) Performance of a ''Like-For-Like'' or ''Alternate'' item Evaluation. (6) Preparation of the Technical and Quality Requirements Specification. Work on this document was initiated in response to the increased emphasis by the utilities owning nuclear power plants and nuclear industry on procurement of replacement items for use in safety related applications at nuclear power plants. 20 refs., 9 figs., 14 tabs

  8. Item response theory - A first approach

    Science.gov (United States)

    Nunes, Sandra; Oliveira, Teresa; Oliveira, Amílcar

    2017-07-01

    The Item Response Theory (IRT) has become one of the most popular scoring frameworks for measurement data, frequently used in computerized adaptive testing, cognitively diagnostic assessment and test equating. According to Andrade et al. (2000), IRT can be defined as a set of mathematical models (Item Response Models - IRM) constructed to represent the probability of an individual giving the right answer to an item of a particular test. The number of Item Responsible Models available to measurement analysis has increased considerably in the last fifteen years due to increasing computer power and due to a demand for accuracy and more meaningful inferences grounded in complex data. The developments in modeling with Item Response Theory were related with developments in estimation theory, most remarkably Bayesian estimation with Markov chain Monte Carlo algorithms (Patz & Junker, 1999). The popularity of Item Response Theory has also implied numerous overviews in books and journals, and many connections between IRT and other statistical estimation procedures, such as factor analysis and structural equation modeling, have been made repeatedly (Van der Lindem & Hambleton, 1997). As stated before the Item Response Theory covers a variety of measurement models, ranging from basic one-dimensional models for dichotomously and polytomously scored items and their multidimensional analogues to models that incorporate information about cognitive sub-processes which influence the overall item response process. The aim of this work is to introduce the main concepts associated with one-dimensional models of Item Response Theory, to specify the logistic models with one, two and three parameters, to discuss some properties of these models and to present the main estimation procedures.

  9. Toward a More Responsive Consumable Materiel Supply Chain: Leveraging New Metrics to Identify and Classify Items of Concern

    Science.gov (United States)

    2016-06-01

    MATERIEL SUPPLY CHAIN: LEVERAGING NEW METRICS TO IDENTIFY AND CLASSIFY ITEMS OF CONCERN by Andrew R. Haley June 2016 Thesis Advisor: Robert...IDENTIFY AND CLASSIFY ITEMS OF CONCERN 5. FUNDING NUMBERS 6. AUTHOR(S) Andrew R. Haley 7. PERFORMING ORGANIZATION NAME(S) AND ADDRESS(ES) Naval...Supply Systems Command (NAVSUP), logistics, inventory, consumable, NSNs at Risk, Bad Actors, Bad Actors with Trend, items of concern , customer time

  10. Southeast Alaska Coastal Digital Elevation Model

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) to support individual coastal States as part of the...

  11. Tatitlek, Alaska Coastal Digital Elevation Model

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) to support individual coastal States as part of the...

  12. Hoonah, Alaska Coastal Digital Elevation Model

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) to support individual coastal States as part of the...

  13. Whittier, Alaska Coastal Digital Elevation Model

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) to support individual coastal States as part of the...

  14. Gustavus, Alaska Coastal Digital Elevation Model

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) to support individual coastal States as part of the...

  15. Chenega, Alaska Coastal Digital Elevation Model

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) to support individual coastal States as part of the...

  16. Juneau, Alaska Coastal Digital Elevation Model

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) to support individual coastal States as part of the...

  17. Unalaska, Alaska Coastal Digital Elevation Model

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) to support individual coastal States as part of the...

  18. Digital Self-Harm Among Adolescents.

    Science.gov (United States)

    Patchin, Justin W; Hinduja, Sameer

    2017-12-01

    Despite increased media and scholarly attention to digital forms of aggression directed toward adolescents by their peers (e.g., cyberbullying), very little research has explored digital aggression directed toward oneself. "Digital self-harm" is the anonymous online posting, sending, or otherwise sharing of hurtful content about oneself. The current study examined the extent of digital self-harm among adolescents. Survey data were obtained in 2016 from a nationally representative sample of 5,593 American middle and high school students (12-17 years old). Logistic regression analysis was used to identify correlates of participation in digital self-harm. Qualitative responses were also reviewed to better understand motivations for digital self-harm. About 6% of students have anonymously posted something online about themselves that was mean. Males were significantly more likely to report participation (7.1% compared to 5.3%). Several statistically significant correlates of involvement in digital self-harm were identified, including sexual orientation, experience with school bullying and cyberbullying, drug use, participation in various forms of adolescent deviance, and depressive symptoms. Digital self-harm is a new problem that demands additional scholarly attention. A deeper inquiry as to the motivations behind this behavior, and how it correlates to offline self-harm and suicidal ideation, can help direct mental health professionals toward informed prevention approaches. Copyright © 2017 Society for Adolescent Health and Medicine. Published by Elsevier Inc. All rights reserved.

  19. Investigating Separate and Concurrent Approaches for Item Parameter Drift in 3PL Item Response Theory Equating

    Science.gov (United States)

    Arce-Ferrer, Alvaro J.; Bulut, Okan

    2017-01-01

    This study examines separate and concurrent approaches to combine the detection of item parameter drift (IPD) and the estimation of scale transformation coefficients in the context of the common item nonequivalent groups design with the three-parameter item response theory equating. The study uses real and synthetic data sets to compare the two…

  20. Confirmatory Factor Analysis of IT-based Competency Questionnaire in Information Science & Knowledge Studies, Based on Job Market Analysis

    Directory of Open Access Journals (Sweden)

    Rahim Shahbazi

    2016-03-01

    Full Text Available The main purpose of the present research is to evaluate the validity of an IT-based competency questionnaire in Information Science & Knowledge Studies. The Survey method has been used in the present research. A data collection tool has been a researcher-made questionnaire. Statistic samples, which are 315 people, have been chosen purposefully from among Iranian faculty members, Ph.D. students, and information center employees. The findings showed that by eliminating 17 items from the whole questionnaire and Confirmatory Factor Analysis of the rest and rotating findings using the Varimax method, 8 Factors were revealed. The resulting components and also the items which had a high load factor with these components were considerably consistent with the classifications in the questionnaire and partly consistent with the findings of other researchers. 76 competency indicators (knowledge, skills, and attitudes were validated and grouped under 8 main categories: 1. “Computer Basics” 2. “Database Operating, Collection Development of Digital Resources, & Digital Library Management” 3. “Basics of Computer Networking” 4. “Basics of Programming & Database Designing” 5. “Web Designing & Web Content Analysis” 6. “Library Software & Computerized Organizing” 7. Archive of Digital Resources and 8. Attitudes.

  1. Engaging Elements of Cancer-Related Digital Stories in Alaska

    Science.gov (United States)

    Cueva, Melany; Kuhnley, Regina; Revels, Laura; Schoenberg, Nancy E.; Lanier, Anne; Dignan, Mark

    2015-01-01

    The tradition of storytelling is an integral part of Alaska Native cultures that continues to be a way of passing on knowledge. Using a story-based approach to share cancer education is grounded in Alaska Native traditions and people’s experiences and has the potential to positively impact cancer knowledge, understandings, and wellness choices. Community health workers (CHWs) in Alaska created a personal digital story as part of a 5-day, in-person cancer education course. To identify engaging elements of digital stories among Alaska Native people, one focus group was held in each of three different Alaska communities with a total of 29 adult participants. After viewing CHWs’ digital stories created during CHW cancer education courses, focus group participants commented verbally and in writing about cultural relevance, engaging elements, information learned, and intent to change health behavior. Digital stories were described by Alaska focus group participants as being culturally respectful, informational, inspiring, and motivational. Viewers shared that they liked digital stories because they were short (only 2–3 min); nondirective and not preachy; emotional, told as a personal story and not just facts and figures; and relevant, using photos that showed Alaskan places and people. PMID:25865400

  2. Digital control in LLRF system for CYCIAE-100 cyclotron

    Energy Technology Data Exchange (ETDEWEB)

    Yin, Zhiguo, E-mail: bitbearAT@hotmail.com; Fu, Xiaoliang; Ji, Bin; Zhang, Tianjue; Wang, Chuan

    2016-05-21

    As a driven accelerator, the CYCIAE-100 cyclotron is designed by China Institute of Atomic Energy for the Beijing Radio Ion-beam Facility project. The cyclotron RF system is designed to use two RF power sources of 100 kW to drive two half-wavelength cavities respectively. Two Dee accelerating electrodes are kept separately from each other inside the cyclotron, while their accelerating voltages are maintained in phase by the efforts of LLRF control. An analog–digital hybrid LLRF system has been developed to achieve cavity tuning control, dee voltage amplitude and phase stabilization etc. The analog subsystems designs are focused on RF signal up/down conversion, tuning control, and dee voltage regulation. The digital system provides an RF signal source, aligns the cavity phases and maintains a Finite State Machine. The digital parts combine with the analog functions to provide the LLRF control. A brief system hardware introduction will be given in this paper, followed by the review of several major characteristics of the digital control in the 100 MeV cyclotron LLRF system. The commissioning is also introduced, and most of the optimization during the process was done by changing the digital parts.

  3. 7 CFR 220.7 - Requirements for participation.

    Science.gov (United States)

    2010-01-01

    ... items such a grade, purchase units, style, condition, weight, ingredients, formulations, and delivery... citations affecting § 220.7, see the List of CFR Sections Affected, which appears in the Finding Aids...

  4. The Use and Effectiveness of Digital Marketing. Case - Foundation for the Arts and Humanities

    OpenAIRE

    Vigandt, Valeriia

    2017-01-01

    In the course of completing this paper, the topic of digital marketing was studied, including such areas as digital marketing in general and its basics, advantages of us-ing digital marketing, digital marketing tools, digital marketing application including planning and implementation, evaluation of a digital marketing campaign effective-ness, and, finally, the matters and ideas that ensure digital marketing success. All of these constitute the theoretical part of this thesis. The reason ...

  5. ANALISIS STRATEGI BERSAING GUDANG DIGITAL YOGYAKARTA DALAM MEMPERLUAS PASAR

    OpenAIRE

    Nofrizal Nofrizal

    2015-01-01

    Abstrak : Gudang Digital adalah sebuah perusahaan yang bergerak dalam bidang retail fotograpi di Yogyakarta yang sudah berdiri selama 7 tahun dengan kerja keras dan kesabaran Gudang Digital berhasil membaca kebutuhan konsumen Yogyakarta, hingga saat ini Gudang Digital sudah memiliki 3 cabang serta memiliki cafe dan kelas fotograpi adapun strategi yang mereka gunakan adalah one stop shoping dan paling murah .Pemilihan Srategi yang tepat bagi Gudang Digital merupakan salah satu tujuan yang peni...

  6. Analysis of differential item functioning in the depression item bank from the Patient Reported Outcome Measurement Information System (PROMIS: An item response theory approach

    Directory of Open Access Journals (Sweden)

    JOSEPH P. EIMICKE

    2009-06-01

    Full Text Available The aims of this paper are to present findings related to differential item functioning (DIF in the Patient Reported Outcome Measurement Information System (PROMIS depression item bank, and to discuss potential threats to the validity of results from studies of DIF. The 32 depression items studied were modified from several widely used instruments. DIF analyses of gender, age and education were performed using a sample of 735 individuals recruited by a survey polling firm. DIF hypotheses were generated by asking content experts to indicate whether or not they expected DIF to be present, and the direction of the DIF with respect to the studied comparison groups. Primary analyses were conducted using the graded item response model (for polytomous, ordered response category data with likelihood ratio tests of DIF, accompanied by magnitude measures. Sensitivity analyses were performed using other item response models and approaches to DIF detection. Despite some caveats, the items that are recommended for exclusion or for separate calibration were "I felt like crying" and "I had trouble enjoying things that I used to enjoy." The item, "I felt I had no energy," was also flagged as evidencing DIF, and recommended for additional review. On the one hand, false DIF detection (Type 1 error was controlled to the extent possible by ensuring model fit and purification. On the other hand, power for DIF detection might have been compromised by several factors, including sparse data and small sample sizes. Nonetheless, practical and not just statistical significance should be considered. In this case the overall magnitude and impact of DIF was small for the groups studied, although impact was relatively large for some individuals.

  7. A Model of Batch Scheduling for a Single Batch Processor with Additional Setups to Minimize Total Inventory Holding Cost of Parts of a Single Item Requested at Multi-due-date

    Science.gov (United States)

    Hakim Halim, Abdul; Ernawati; Hidayat, Nita P. A.

    2018-03-01

    This paper deals with a model of batch scheduling for a single batch processor on which a number of parts of a single items are to be processed. The process needs two kinds of setups, i. e., main setups required before processing any batches, and additional setups required repeatedly after the batch processor completes a certain number of batches. The parts to be processed arrive at the shop floor at the times coinciding with their respective starting times of processing, and the completed parts are to be delivered at multiple due dates. The objective adopted for the model is that of minimizing total inventory holding cost consisting of holding cost per unit time for a part in completed batches, and that in in-process batches. The formulation of total inventory holding cost is derived from the so-called actual flow time defined as the interval between arrival times of parts at the production line and delivery times of the completed parts. The actual flow time satisfies not only minimum inventory but also arrival and delivery just in times. An algorithm to solve the model is proposed and a numerical example is shown.

  8. 76 FR 60474 - Commercial Item Handbook

    Science.gov (United States)

    2011-09-29

    ... DEPARTMENT OF DEFENSE Defense Acquisition Regulations System Commercial Item Handbook AGENCY.... SUMMARY: DoD has updated its Commercial Item Handbook. The purpose of the Handbook is to help acquisition personnel develop sound business strategies for procuring commercial items. DoD is seeking industry input on...

  9. Change and Innovation Leadership in an Industrial Digital Environment

    Directory of Open Access Journals (Sweden)

    Steude Dietrich H.

    2017-12-01

    Full Text Available With the high pace of digital innovation processes the risk of digital disruption increases for industrial companies. However, the progress in industrial digitalization accelerates the decision processes and relieves management from routine work. It gives room for creative management challenges like change and innovation processes. Team-oriented methods like Design Thinking are becoming a crucial part of the innovation culture. Industrial leadership must find current ways that are linked to creativity and to a coordinated human interaction. The article ties together the relevant literature and innovative ideas of digital tools, agile methodology and consequences for a flexible organizational structure.

  10. Item Response Theory analysis of the Autonomy over Tobacco Scale (AUTOS).

    Science.gov (United States)

    Wellman, Robert J; Edelen, Maria Orlando; DiFranza, Joseph R

    2015-06-01

    The Autonomy over Tobacco Scale (AUTOS) is composed of 12-symptoms of nicotine dependence. While it has demonstrated excellent reliability and validity, several psychometric properties have yet to be investigated. We aimed to determine (1) whether items functioned differently across demographic groups, (2) the likelihood that individual symptoms would be endorsed by smokers at different levels of diminished autonomy, and (3) the degree of information provided by each item and the reliability of the full AUTOS across the range of diminished autonomy. Data for this study come from two convenience samples of American adult current smokers (n=777; 69% female; 88% white; Mage=34 years, range: 18-78), of whom 66% were daily smokers (Mcigarettes/smoking day=10.1, range: AUTOS online as part of "a research study about the experiences people have when they smoke." After p value correction, items remained invariant across sex and minority status, while two items functioned differently according to age, with minimal impact on the total AUTOS score. Discriminative power of the items was high. The greatest amount of information is provided at just under one-half SD above the mean and the least at the extremes of diminished autonomy. The AUTOS maintains acceptable reliability (>0.70) across the range of diminished autonomy within which more than 95% of smokers' scores could be anticipated to fall. The AUTOS is a versatile and psychometrically sound instrument for measuring the loss of autonomy over tobacco use. Copyright © 2015 Elsevier Ltd. All rights reserved.

  11. Digital signal integrity and stability in the ATLAS Level-1 Calorimeter Trigger

    CERN Document Server

    Achenbach, R; Aharrouche, M; Andrei, V; Åsman, B; Barnett, B M; Bauss, B; Bendel, M; Bohm, C; Booth, J R A; Bracinik, J; Brawn, I P; Charlton, D G; Childers, J T; Collins, N J; Curtis, C J; Davis, A O; Eckweiler, S; Eisenhandler, E F; Faulkner, P J W; Fleckner, J; Föhlisch, F; Gee, C N P; Gillman, A R; Goringer, C; Groll, M; Hadley, D R; Hanke, P; Hellman, S; Hidvegi, A; Hillier, S J; Johansen, M; Kluge, E E; Kühl, T; Landon, M; Lendermann, V; Lilley, J N; Mahboubi, K; Mahout, G; Meier, K; Middleton, R P; Moa, T; Morris, J D; Müller, F; Neusiedl, A; Ohm, C; Oltmann, B; Perera, V J O; Prieur, D P F; Qian, W; Rieke, S; Rühr, F; Sankey, D P C; Schäfer, U; Schmitt, K; Schultz-Coulon, H C; Silverstein, S; Sjölin, J; Staley, R J; Stamen, R; Stockton, M C; Tan, C L A; Tapprogge, S; Thomas, J P; Thompson, P D; Watkins, P M; Watson, A; Weber, P; Wessels, M; Wildt, M

    2008-01-01

    The ATLAS Level-1 calorimeter trigger is a hardware-based system with the goal of identifying high-pT objects and to measure total and missing ET in the ATLAS calorimeters within an overall latency of 2.5 microseconds. This trigger system is composed of the Preprocessor which digitises about 7200 analogue input channels and two digital processors to identify high-pT signatures and to calculate the energy sums. The digital part consists of multi-stage, pipelined custom-built modules. The high demands on connectivity between the initial analogue stage and digital part and between the custom-built modules are presented. Furthermore the techniques to establish timing regimes and verify connectivity and stable operation of these digital links will be described.

  12. Item Analysis in Introductory Economics Testing.

    Science.gov (United States)

    Tinari, Frank D.

    1979-01-01

    Computerized analysis of multiple choice test items is explained. Examples of item analysis applications in the introductory economics course are discussed with respect to three objectives: to evaluate learning; to improve test items; and to help improve classroom instruction. Problems, costs and benefits of the procedures are identified. (JMD)

  13. Development of a self-report physical function instrument for disability assessment: item pool construction and factor analysis.

    Science.gov (United States)

    McDonough, Christine M; Jette, Alan M; Ni, Pengsheng; Bogusz, Kara; Marfeo, Elizabeth E; Brandt, Diane E; Chan, Leighton; Meterko, Mark; Haley, Stephen M; Rasch, Elizabeth K

    2013-09-01

    To build a comprehensive item pool representing work-relevant physical functioning and to test the factor structure of the item pool. These developmental steps represent initial outcomes of a broader project to develop instruments for the assessment of function within the context of Social Security Administration (SSA) disability programs. Comprehensive literature review; gap analysis; item generation with expert panel input; stakeholder interviews; cognitive interviews; cross-sectional survey administration; and exploratory and confirmatory factor analyses to assess item pool structure. In-person and semistructured interviews and Internet and telephone surveys. Sample of SSA claimants (n=1017) and a normative sample of adults from the U.S. general population (n=999). Not applicable. Model fit statistics. The final item pool consisted of 139 items. Within the claimant sample, 58.7% were white; 31.8% were black; 46.6% were women; and the mean age was 49.7 years. Initial factor analyses revealed a 4-factor solution, which included more items and allowed separate characterization of: (1) changing and maintaining body position, (2) whole body mobility, (3) upper body function, and (4) upper extremity fine motor. The final 4-factor model included 91 items. Confirmatory factor analyses for the 4-factor models for the claimant and the normative samples demonstrated very good fit. Fit statistics for claimant and normative samples, respectively, were: Comparative Fit Index=.93 and .98; Tucker-Lewis Index=.92 and .98; and root mean square error approximation=.05 and .04. The factor structure of the physical function item pool closely resembled the hypothesized content model. The 4 scales relevant to work activities offer promise for providing reliable information about claimant physical functioning relevant to work disability. Copyright © 2013 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

  14. A review of the effects on IRT item parameter estimates with a focus on misbehaving common items in test equating

    Directory of Open Access Journals (Sweden)

    Michalis P Michaelides

    2010-10-01

    Full Text Available Many studies have investigated the topic of change or drift in item parameter estimates in the context of Item Response Theory. Content effects, such as instructional variation and curricular emphasis, as well as context effects, such as the wording, position, or exposure of an item have been found to impact item parameter estimates. The issue becomes more critical when items with estimates exhibiting differential behavior across test administrations are used as common for deriving equating transformations. This paper reviews the types of effects on IRT item parameter estimates and focuses on the impact of misbehaving or aberrant common items on equating transformations. Implications relating to test validity and the judgmental nature of the decision to keep or discard aberrant common items are discussed, with recommendations for future research into more informed and formal ways of dealing with misbehaving common items.

  15. A Review of the Effects on IRT Item Parameter Estimates with a Focus on Misbehaving Common Items in Test Equating.

    Science.gov (United States)

    Michaelides, Michalis P

    2010-01-01

    Many studies have investigated the topic of change or drift in item parameter estimates in the context of item response theory (IRT). Content effects, such as instructional variation and curricular emphasis, as well as context effects, such as the wording, position, or exposure of an item have been found to impact item parameter estimates. The issue becomes more critical when items with estimates exhibiting differential behavior across test administrations are used as common for deriving equating transformations. This paper reviews the types of effects on IRT item parameter estimates and focuses on the impact of misbehaving or aberrant common items on equating transformations. Implications relating to test validity and the judgmental nature of the decision to keep or discard aberrant common items are discussed, with recommendations for future research into more informed and formal ways of dealing with misbehaving common items.

  16. Storytelling in the digital world: achieving higher-level learning objectives.

    Science.gov (United States)

    Schwartz, Melissa R

    2012-01-01

    Nursing students are not passive media consumers but instead live in a technology ecosystem where digital is the language they speak. To prepare the next generation of nurses, educators must incorporate multiple technologies to improve higher-order learning. The author discusses the evolution and use of storytelling as part of the digital world and how digital stories can be aligned with Bloom's Taxonomy so that students achieve higher-level learning objectives.

  17. Item Response Theory Applied to Factors Affecting the Patient Journey Towards Hearing Rehabilitation

    Science.gov (United States)

    Chenault, Michelene; Berger, Martijn; Kremer, Bernd; Anteunis, Lucien

    2016-01-01

    To develop a tool for use in hearing screening and to evaluate the patient journey towards hearing rehabilitation, responses to the hearing aid rehabilitation questionnaire scales aid stigma, pressure, and aid unwanted addressing respectively hearing aid stigma, experienced pressure from others; perceived hearing aid benefit were evaluated with item response theory. The sample was comprised of 212 persons aged 55 years or more; 63 were hearing aid users, 64 with and 85 persons without hearing impairment according to guidelines for hearing aid reimbursement in the Netherlands. Bias was investigated relative to hearing aid use and hearing impairment within the differential test functioning framework. Items compromising model fit or demonstrating differential item functioning were dropped. The aid stigma scale was reduced from 6 to 4, the pressure scale from 7 to 4, and the aid unwanted scale from 5 to 4 items. This procedure resulted in bias-free scales ready for screening purposes and application to further understand the help-seeking process of the hearing impaired. PMID:28028428

  18. Tackling online inequality: Making digital platforms work for inclusive ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Tackling online inequality: Making digital platforms work for inclusive development. As they become an essential part of the digital experience, online platforms such as Facebook, Amazon, Uber, AirBnB, and Twitter are having a direct bearing on social inclusion and opportunity in many spheres of life for people around the ...

  19. A Study of General Education Astronomy Students' Understandings of Cosmology. Part III. Evaluating Four Conceptual Cosmology Surveys: An Item Response Theory Approach

    Science.gov (United States)

    Wallace, Colin S.; Prather, Edward E.; Duncan, Douglas K.

    2012-01-01

    This is the third of five papers detailing our national study of general education astronomy students' conceptual and reasoning difficulties with cosmology. In this paper, we use item response theory to analyze students' responses to three out of the four conceptual cosmology surveys we developed. The specific item response theory model we use is…

  20. A Comparison of the 27-Item and 12-Item Intolerance of Uncertainty Scales

    Science.gov (United States)

    Khawaja, Nigar G.; Yu, Lai Ngo Heidi

    2010-01-01

    The 27-item Intolerance of Uncertainty Scale (IUS) has become one of the most frequently used measures of Intolerance of Uncertainty. More recently, an abridged, 12-item version of the IUS has been developed. The current research used clinical (n = 50) and non-clinical (n = 56) samples to examine and compare the psychometric properties of both…

  1. More is not Always Better: The Relation between Item Response and Item Response Time in Raven’s Matrices

    Directory of Open Access Journals (Sweden)

    Frank Goldhammer

    2015-03-01

    Full Text Available The role of response time in completing an item can have very different interpretations. Responding more slowly could be positively related to success as the item is answered more carefully. However, the association may be negative if working faster indicates higher ability. The objective of this study was to clarify the validity of each assumption for reasoning items considering the mode of processing. A total of 230 persons completed a computerized version of Raven’s Advanced Progressive Matrices test. Results revealed that response time overall had a negative effect. However, this effect was moderated by items and persons. For easy items and able persons the effect was strongly negative, for difficult items and less able persons it was less negative or even positive. The number of rules involved in a matrix problem proved to explain item difficulty significantly. Most importantly, a positive interaction effect between the number of rules and item response time indicated that the response time effect became less negative with an increasing number of rules. Moreover, exploratory analyses suggested that the error type influenced the response time effect.

  2. Narrative Influences on "Desire to Act in My Community" in Digital Storytelling Workshops for Latina Teens.

    Science.gov (United States)

    Larkey, Linda; Del Toro-Mejías, Lizbeth; DiFulvio, Gloria; Gubrium, Aline

    2018-04-01

    Digital storytelling workshops are increasingly being used to capture lived experiences and develop/disseminate health promotion messages for vulnerable and marginalized populations. Thirty female Latina teens of varied sexual/parity status produced digital stories of significant life experiences in a group context and then viewed and evaluated them using the Narrative Quality Assessment Tool. This tool was used to examine participants' experience of emotional engagement and identification with each story as well as a single-item indicator of desire to "do something in my community" related to the story. Emotional engagement was moderately strong; identification scores were neutral relative to the stories. Emotional engagement was strongly, significantly related to "desire to act in my community," while identification was not related. Emotional engagement should be considered an important factor to incorporate in the production of digital stories for purposes of developing interest in social action beyond the digital storytelling workshop.

  3. Issues for bringing digital libraries into public use

    Science.gov (United States)

    Flater, David W.; Yesha, Yelena

    1993-01-01

    In much the same way that the field of artificial intelligence produced a cult which fervently believed that computers would soon think like human beings, the existence of electronic books has resurrected the paperless society as a utopian vision to some, an apocalyptic horror to others. In this essay we have attempted to provide realistic notions of what digital libraries are likely to become if they are a popular success. E-books are capable of subsuming most of the media we use today and have the potential for added functionality by being interactive. The environmental impact of having millions more computers will be offset to some degree, perhaps even exceeded, by the fact that televisions, stereos, VCR's, CD players, newspapers, magazines, and books will become part of the computer system or be made redundant. On the whole, large-scale use of digital libraries is likely to be a winning proposition. Whether or not this comes to pass depends on the directions taken by today's researchers and software developers. By involving the public, the effort being put into digital libraries can be leveraged into something which is big enough to make a real change for the better. If digital libraries remain the exclusive property of government, universities, and large research firms, then large parts of the world will remain without digital libraries for years to come, just as they have remained without digital phone service for far too long. If software companies try to scuttle the project by patenting crucial algorithms and using proprietary data formats, all of us will suffer. Let us reverse the errors of the past and create a truly open digital library system.

  4. Professional Ethics for Digital Age Psychiatry: Boundaries, Privacy, and Communication.

    Science.gov (United States)

    Sabin, James E; Harland, Jonathan Clark

    2017-09-01

    Internet and social media use continue to expand rapidly. Many patients and psychiatrists are bringing digital technologies into the treatment process, but relatively little attention has been paid to the ethical challenges in doing this. This review presents ethical guidelines for psychiatry in the digital age. Surveys demonstrate that patients are eager to make digital technologies part of their treatment. Substantial numbers search for professional and personal information about their therapists. Attitudes among psychiatrists about using digital technologies with patients range from dread to enthusiastic adoption. Digital technologies create four major ethical challenges for psychiatry: managing clinical boundaries; maintaining privacy and confidentiality; establishing realistic expectations regarding digital communications; and upholding professional ideals. Traditional ethical expectations are valid for the evolving digital arena, but guidance must be adapted for actual application in practice.

  5. Lesson learned - CGID based on the Method 1 and Method 2 for digital equipment

    International Nuclear Information System (INIS)

    Hwang, Wonil; Sohn, Kwang Young; Cho, Chang Hwan; Kim, Sung Jong

    2015-01-01

    The acceptance methods associated with commercial-grade dedication are the following: 1) Special tests and inspection (Method 1) 2) Commercial-grade surveys (Method 2) 3) Source verification (Method 3) 4) An acceptable item and supplier performance record (Method 4) Special tests and inspections, often referred to as Method 1, are performed by the dedicating entity after the item is received to verify selected critical characteristics. Conducting a commercial-grade survey of a supplier is often referred to as Method 2. Supplier audits to verify compliance with a nuclear QA program do not meet the intent of a commercial-grade survey. Source verification, often referred to as Method 3, entails verification of critical characteristics during manufacture and testing of the item being procured. The performance history (good or bad) of the item and supplier is a consideration when determining the use of the other acceptance methods and the rigor with which they are used on a case-by-case basis. Some digital equipment system has the delivery reference and its operating history for Nuclear Power Plant as far as surveyed. However it was found that there is difficulty in collecting this of supporting data sheet, so that supplier usually decide to conduct the CGID based on the Method-1 and Method-2 based on the initial qualification likely. It is conceived that the Method-4 might be a better approach for CGID(Commercial Grade Item Dedication) even if there are some difficulties in data package for justifying CGID from the vendor and operating organization. This paper present the lesson learned from the consulting for Method-1 and 2 for digital equipment dedication. Considering all the information above, there are a couple of issues to remind in order to perform the CGID for Method-2. In doing commercial grade survey based on Method 2, quality personnel as well as technical engineer shall be involved for integral dedication. Other than this, the review of critical

  6. Measuring self-esteem after spinal cord injury: Development, validation and psychometric characteristics of the SCI-QOL Self-esteem item bank and short form.

    Science.gov (United States)

    Kalpakjian, Claire Z; Tate, Denise G; Kisala, Pamela A; Tulsky, David S

    2015-05-01

    To describe the development and psychometric properties of the Spinal Cord Injury-Quality of Life (SCI-QOL) Self-esteem item bank. Using a mixed-methods design, we developed and tested a self-esteem item bank through the use of focus groups with individuals with SCI and clinicians with expertise in SCI, cognitive interviews, and item-response theory-(IRT) based analytic approaches, including tests of model fit, differential item functioning (DIF) and precision. We tested a pool of 30 items at several medical institutions across the United States, including the University of Michigan, Kessler Foundation, the Rehabilitation Institute of Chicago, the University of Washington, Craig Hospital, and the James J. Peters/Bronx Department of Veterans Affairs hospital. A total of 717 individuals with SCI completed the self-esteem items. A unidimensional model was observed (CFI=0.946; RMSEA=0.087) and measurement precision was good (theta range between -2.7 and 0.7). Eleven items were flagged for DIF; however, effect sizes were negligible with little practical impact on score estimates. The final calibrated item bank resulted in 23 retained items. This study indicates that the SCI-QOL Self-esteem item bank represents a psychometrically robust measurement tool. Short form items are also suggested and computer adaptive tests are available.

  7. Activities to Address Challenges in Digital Innovation

    OpenAIRE

    Lund , Jesper

    2014-01-01

    Part 3: Structures and Networks; International audience; Based on a literature review, this paper identifies four socio-technical challenges relating to innovation actor’s interactions in digital innovation. Furthermore, the paper explores how these challenges can be addressed. The challenges are investigated in a case study of digital innovation. The study is based on a two year long research and development project where an e-newspaper concept and a demonstrator based on e-paper technology ...

  8. Analogue to Digital and Digital to Analogue (AD/DA) Conversion Techniques: An Overview

    CERN Multimedia

    CERN. Geneva

    2002-01-01

    The basic ideas behind modern Analogue to Digital and Digital to Analogue (AD/DA) conversion methods will be introduced: a general view of the importance of these devices will be given, along with the digital representation of time-varying, real-world analogue signals. Some CERN applications will be outlined. The variety of conversion methods, their limitations, error sources and measurement methods will form the major part of this presentation. A review of the technological progress in this field over the last 30 years will be presented, concluding with the present 'state of the art' and a quick look at what is just around the corner. This Technical Training Seminar is in the framework of the FEED-2002 Lecture Series, and it is a prerequisite to attending to any of the FEED-2002 Terms. FEED-2002 is a two-term course that will review the techniques dealing with closed loop systems, focussing on time-invariant linear systems. (free attendance, no registration required) More information on the FEED-2002 ...

  9. Checking Equity: Why Differential Item Functioning Analysis Should Be a Routine Part of Developing Conceptual Assessments

    Czech Academy of Sciences Publication Activity Database

    Martinková, Patrícia; Drabinová, Adéla; Liaw, Y.L.; Sanders, E.A.; McFarland, J.L.; Price, R.M.

    2017-01-01

    Roč. 16, č. 2 (2017), č. článku rm2. ISSN 1931-7913 R&D Projects: GA ČR GJ15-15856Y Grant - others:NSF(US) DUE-1043443 Institutional support: RVO:67985807 Keywords : differential item functioning * fairness * conceptual assessments * concept inventory * undergraduate education * bias Subject RIV: AM - Education OBOR OECD: Education , special (to gifted persons, those with learning disabilities) Impact factor: 3.930, year: 2016

  10. Negative effects of item repetition on source memory.

    Science.gov (United States)

    Kim, Kyungmi; Yi, Do-Joon; Raye, Carol L; Johnson, Marcia K

    2012-08-01

    In the present study, we explored how item repetition affects source memory for new item-feature associations (picture-location or picture-color). We presented line drawings varying numbers of times in Phase 1. In Phase 2, each drawing was presented once with a critical new feature. In Phase 3, we tested memory for the new source feature of each item from Phase 2. Experiments 1 and 2 demonstrated and replicated the negative effects of item repetition on incidental source memory. Prior item repetition also had a negative effect on source memory when different source dimensions were used in Phases 1 and 2 (Experiment 3) and when participants were explicitly instructed to learn source information in Phase 2 (Experiments 4 and 5). Importantly, when the order between Phases 1 and 2 was reversed, such that item repetition occurred after the encoding of critical item-source combinations, item repetition no longer affected source memory (Experiment 6). Overall, our findings did not support predictions based on item predifferentiation, within-dimension source interference, or general interference from multiple traces of an item. Rather, the findings were consistent with the idea that prior item repetition reduces attention to subsequent presentations of the item, decreasing the likelihood that critical item-source associations will be encoded.

  11. Non-Digital Game Playing by Older Adults.

    Science.gov (United States)

    Mortenson, W Ben; Sixsmith, Andrew; Kaufman, David

    2017-09-01

    Research on video games' effect on cognition and behaviour has been extensive, yet little research has explored non-digital forms of game playing, especially among older adults. As part of a larger survey on game playing, 886 respondents (≥ age 55) filled out questionnaires about non-digital game play. The study aims were to determine perceived benefits of non-digital game play and to determine socio-demographic factors that might predict perceived benefits. Survey results indicate that non-digital game playing is social in nature and common (73% of respondents) among older adults. Older adults play for fun, but also to help maintain their cognition. Regression analyses indicated various socio-demographic factors - age, education, gender, and race - were independently associated with perceived benefits from game playing. The results thus emphasize the importance of non-digital game playing in this population and suggest that efforts to facilitate game playing may improve social interactions and quality of life.

  12. TINGKAT PERSEDIAAN SPARE PART FORKLIFT MEREK KOMATSU DENGAN PENDEKATAN MODEL PERSEDIAAN SINGLE ITEM

    Directory of Open Access Journals (Sweden)

    Wahid Ahmad Jauhari

    2006-04-01

    Full Text Available The control and maintenance of inventories is a problem common to all enterprises in any sector of a given economy. Two fundamental question that must be answered in controlling the inventory are when to replenish the inventory and how much to order for replenishment. The (Q,r inventory models attempt to answer the two question under a variety of circumstances. Studies have shown, (1 that a company that ignores lead-time demand variability may suffer great financial damage, (2 that the gamma distribution provides the most common best fit to lead-time demand for variety of inventories items, (3 that a fixed lead-time demand assumption or a normal approximation to it will often yield significant errors (Namit and Chen, 1998.This research performed an efficient and accurate algorithm for solving (Q,r inventory model with gamma lead-time demand.

  13. Examination of the PROMIS upper extremity item bank.

    Science.gov (United States)

    Hung, Man; Voss, Maren W; Bounsanga, Jerry; Crum, Anthony B; Tyser, Andrew R

    Clinical measurement. The psychometric properties of the PROMIS v1.2 UE item bank were tested on various samples prior to its release, but have not been fully evaluated among the orthopaedic population. This study assesses the performance of the UE item bank within the UE orthopaedic patient population. The UE item bank was administered to 1197 adult patients presenting to a tertiary orthopaedic clinic specializing in hand and UE conditions and was examined using traditional statistics and Rasch analysis. The UE item bank fits a unidimensional model (outfit MNSQ range from 0.64 to 1.70) and has adequate reliabilities (person = 0.84; item = 0.82) and local independence (item residual correlations range from -0.37 to 0.34). Only one item exhibits gender differential item functioning. Most items target low levels of function. The UE item bank is a useful clinical assessment tool. Additional items covering higher functions are needed to enhance validity. Supplemental testing is recommended for patients at higher levels of function until more high function UE items are developed. 2c. Copyright © 2016 Hanley & Belfus. Published by Elsevier Inc. All rights reserved.

  14. Psychometric Consequences of Subpopulation Item Parameter Drift

    Science.gov (United States)

    Huggins-Manley, Anne Corinne

    2017-01-01

    This study defines subpopulation item parameter drift (SIPD) as a change in item parameters over time that is dependent on subpopulations of examinees, and hypothesizes that the presence of SIPD in anchor items is associated with bias and/or lack of invariance in three psychometric outcomes. Results show that SIPD in anchor items is associated…

  15. Testing methodology of embedded software in digital plant protection system

    International Nuclear Information System (INIS)

    Seong, Ah Young; Choi, Bong Joo; Lee, Na Young; Hwang, Il Soon

    2001-01-01

    It is necessary to assure the reliability of software in order to digitalize RPS(Reactor Protection System). Since RPS causes fatal damage on accidental cases, it is classified as Safety 1E class. Therefore we propose the effective testing methodology to assure the reliability of embedded software in the DPPS(Digital Plant Protection System). To test the embedded software effectively in DPPS, our methodology consists of two steps. The first is the re-engineering step that extracts classes from structural source program, and the second is the level of testing step which is composed of unit testing, Integration Testing and System Testing. On each testing step we test the embedded software with selected test cases after the test item identification step. If we use this testing methodology, we can test the embedded software effectively by reducing the cost and the time

  16. An analysis of a digital variant of the Trail Making Test using machine learning techniques.

    Science.gov (United States)

    Dahmen, Jessamyn; Cook, Diane; Fellows, Robert; Schmitter-Edgecombe, Maureen

    2017-01-01

    The goal of this work is to develop a digital version of a standard cognitive assessment, the Trail Making Test (TMT), and assess its utility. This paper introduces a novel digital version of the TMT and introduces a machine learning based approach to assess its capabilities. Using digital Trail Making Test (dTMT) data collected from (N = 54) older adult participants as feature sets, we use machine learning techniques to analyze the utility of the dTMT and evaluate the insights provided by the digital features. Predicted TMT scores correlate well with clinical digital test scores (r = 0.98) and paper time to completion scores (r = 0.65). Predicted TICS exhibited a small correlation with clinically derived TICS scores (r = 0.12 Part A, r = 0.10 Part B). Predicted FAB scores exhibited a small correlation with clinically derived FAB scores (r = 0.13 Part A, r = 0.29 for Part B). Digitally derived features were also used to predict diagnosis (AUC of 0.65). Our findings indicate that the dTMT is capable of measuring the same aspects of cognition as the paper-based TMT. Furthermore, the dTMT's additional data may be able to help monitor other cognitive processes not captured by the paper-based TMT alone.

  17. The variety, popularity and nutritional quality of tuck shop items ...

    African Journals Online (AJOL)

    Method: A cross-sectional tuck shop survey. Nutritional analyses were conducted using the ... Results: Savoury pies were the most popular lunch item for all learners for both breaks (n = 5, 45%, and n = 3, 27.3%), selling the most number of units (43) per day at eight schools (72.7%). Iced popsicles were sold at almost every ...

  18. Location Indices for Ordinal Polytomous Items Based on Item Response Theory. Research Report. ETS RR-15-20

    Science.gov (United States)

    Ali, Usama S.; Chang, Hua-Hua; Anderson, Carolyn J.

    2015-01-01

    Polytomous items are typically described by multiple category-related parameters; situations, however, arise in which a single index is needed to describe an item's location along a latent trait continuum. Situations in which a single index would be needed include item selection in computerized adaptive testing or test assembly. Therefore single…

  19. Item analysis of the Spanish version of the Boston Naming Test with a Spanish speaking adult population from Colombia.

    Science.gov (United States)

    Kim, Stella H; Strutt, Adriana M; Olabarrieta-Landa, Laiene; Lequerica, Anthony H; Rivera, Diego; De Los Reyes Aragon, Carlos Jose; Utria, Oscar; Arango-Lasprilla, Juan Carlos

    2018-02-23

    The Boston Naming Test (BNT) is a widely used measure of confrontation naming ability that has been criticized for its questionable construct validity for non-English speakers. This study investigated item difficulty and construct validity of the Spanish version of the BNT to assess cultural and linguistic impact on performance. Subjects were 1298 healthy Spanish speaking adults from Colombia. They were administered the 60- and 15-item Spanish version of the BNT. A Rasch analysis was computed to assess dimensionality, item hierarchy, targeting, reliability, and item fit. Both versions of the BNT satisfied requirements for unidimensionality. Although internal consistency was excellent for the 60-item BNT, order of difficulty did not increase consistently with item number and there were a number of items that did not fit the Rasch model. For the 15-item BNT, a total of 5 items changed position on the item hierarchy with 7 poor fitting items. Internal consistency was acceptable. Construct validity of the BNT remains a concern when it is administered to non-English speaking populations. Similar to previous findings, the order of item presentation did not correspond with increasing item difficulty, and both versions were inadequate at assessing high naming ability.

  20. Managing patient dose in digital radiology

    International Nuclear Information System (INIS)

    2014-01-01

    Digital techniques have the potential to improve the practice of radiology but they also risk the overuse of radiation. The main advantages of digital imaging, i.e. wide dynamic range, post processing, multiple viewing options, and electronic transfer and archiving possibilities, are clear but overexposures can occur without an adverse impact on image quality. In conventional radiography, excessive exposure produces a black film. In digital systems, good images are obtained for a large range of doses. It is very easy to obtain (and delete) images with digital fluoroscopy systems, and there may be a tendency to obtain more images than necessary. In digital radiology, higher patient dose usually means improved image quality, so a tendency to use higher patient doses than necessary could occur. Different medical imaging tasks require different levels of image quality, and doses that have no additional benefit for the clinical purpose should be avoided. Image quality can be compromised by inappropriate levels of data compression and/or post processing techniques. All these new challenges should be part of the optimisation process and should be included in clinical and technical protocols. Local diagnostic reference levels should be re-evaluated for digital imaging, and patient dose parameters should be displayed at the operator console. Frequent patient dose audits should occur when digital techniques are introduced. Training in the management of image quality and patient dose in digital radiology is necessary. Digital radiology will involve new regulations and invoke new challenges for practitioners. As digital images are easier to obtain and transmit, the justification criteria should be reinforced. Commissioning of digital systems should involve clinical specialists, medical physicists, and radiographers to ensure that imaging capability and radiation dose management are integrated. Quality control requires new procedures and protocols (visualisation, transmission

  1. Few items in the thyroid-related quality of life instrument ThyPRO exhibited differential item functioning.

    Science.gov (United States)

    Watt, Torquil; Groenvold, Mogens; Hegedüs, Laszlo; Bonnema, Steen Joop; Rasmussen, Åse Krogh; Feldt-Rasmussen, Ulla; Bjorner, Jakob Bue

    2014-02-01

    To evaluate the extent of differential item functioning (DIF) within the thyroid-specific quality of life patient-reported outcome measure, ThyPRO, according to sex, age, education and thyroid diagnosis. A total of 838 patients with benign thyroid diseases completed the ThyPRO questionnaire (84 five-point items, 13 scales). Uniform and nonuniform DIF were investigated using ordinal logistic regression, testing for both statistical significance and magnitude (∆R(2) > 0.02). Scale level was estimated by the sum score, after purification. Twenty instances of DIF in 17 of the 84 items were found. Eight according to diagnosis, where the goiter scale was the one most affected, possibly due to differing perceptions in patients with auto-immune thyroid diseases compared to patients with simple goiter. Eight DIFs according to age were found, of which 5 were in positively worded items, which younger patients were more likely to endorse; one according to gender: women were more likely to report crying, and three according to educational level. The vast majority of DIF had only minor influence on the scale scores (0.1-2.3 points on the 0-100 scales), but two DIF corresponded to a difference of 4.6 and 9.8, respectively. Ordinal logistic regression identified DIF in 17 of 84 items. The potential impact of this on the present scales was low, but items displaying DIF could be avoided when developing abbreviated scales, where the potential impact of DIF (due to fewer items) will be larger.

  2. Digital broadcasting

    International Nuclear Information System (INIS)

    Park, Ji Hyeong

    1999-06-01

    This book contains twelve chapters, which deals with digitization of broadcast signal such as digital open, digitization of video signal and sound signal digitization of broadcasting equipment like DTPP and digital VTR, digitization of equipment to transmit such as digital STL, digital FPU and digital SNG, digitization of transmit about digital TV transmit and radio transmit, digital broadcasting system on necessity and advantage, digital broadcasting system abroad and Korea, digital broadcasting of outline, advantage of digital TV, ripple effect of digital broadcasting and consideration of digital broadcasting, ground wave digital broadcasting of DVB-T in Europe DTV in U.S.A and ISDB-T in Japan, HDTV broadcasting, satellite broadcasting, digital TV broadcasting in Korea, digital radio broadcasting and new broadcasting service.

  3. Use of seismic experience data for technical evaluation of commercial grade replacement items

    International Nuclear Information System (INIS)

    Cushing, R.W.; Campbell, R.D.

    1991-01-01

    This paper reports that the purchase of commercial grade replacement items which are dedicated for use in nuclear safety related systems requires a technical evaluation for those items which cannot be purchased as like-for-like replacements. One of the requirements for performing a technical evaluation is verification of seismic adequacy. Studying the performance and failure modes of equipment which has been subjected to strong motion earthquakes has provided the industry with the ability to predict the behavior characteristics of many types of commonly replaced components and parts. The use of Seismic Experience Data has developed into an efficient means of satisfying the seismic adequacy requirement

  4. Loglinear multidimensional IRT models for polytomously scired Items

    NARCIS (Netherlands)

    Kelderman, Henk

    1988-01-01

    A loglinear item response theory (IRT) model is proposed that relates polytomously scored item responses to a multidimensional latent space. Each item may have a different response function where each item response may be explained by one or more latent traits. Item response functions may follow a

  5. Measurement facilities and accuracy limits of sampling digital interferometers. Meresi lehetoesegek es hibaanalizis digitalis mintavetelezoe interferometeren

    Energy Technology Data Exchange (ETDEWEB)

    Czitrovszky, A.; Jani, P.; Szoter, L.

    1990-12-15

    We discuss the measurement facilities of a recently development sampling digital interferometer for machine tool testing. As opposed to conventional interferometers the present device provides possibilities for the digital storage up to 4 kHz of the complete information of the motion so that displacement, velocity, acceleration and power density spectrum measurement can be performed. An estimation is given for the truncation, round-off, jitter and frequency-aliasing sources of error of the reconstructed motion parameters. On the basis of the Shannon sampling theory optimal conditions of measurement parameters are defined for the case when the accuracy of the reconstructed part of motion and vibration is equal to the resolution of the conventional interferometer. 7 refs., 3 figs., 1 tab.

  6. In Situ Manufacturing is a Necessary Part of Any Planetary Architecture

    Science.gov (United States)

    Edmunson, Jennifer E.; McLemore, Carole A.

    2012-01-01

    The key to any sustainable presence in space is the ability to manufacture necessary tools, parts, structures, spares, etc. in situ and on demand. Cost, volume, and up-mass constraints prohibit launching everything needed for long-duration or long-distance missions from Earth, including spare parts and replacement systems. There are many benefits to building items as-needed in situ using computer aided drafting (CAD) models and additive manufacturing technology: (1) Cost, up-mass, and volume savings for launch due to the ability to manufacture specific parts when needed. (2) CAD models can be generated on Earth and transmitted to the station or spacecraft, or they can be designed in situ for any task. Thus, multiple people in many locations can work on a single problem. (3) Items can be produced that will enhance the safety of crew and vehicles (e.g., latches or guards). (4) Items can be produced on-demand in a small amount of time (i.e., hours or days) compared to traditional manufacturing methods and, therefore, would not require the lengthy amount of time needed to machine the part from a solid block of material nor the wait time required if the part had to be launched from Earth. (5) Used and obsolete parts can be recycled into powder or wire feedstock for use in later manufacturing. (6) Ultimately, the ability to produce items as-needed will reduce mission risk, as one will have everything they need to fix a broken system or fashion a new part making it available on a more timely basis.

  7. 48 CFR 852.214-72 - Alternate item(s).

    Science.gov (United States)

    2010-10-01

    ... AND FORMS SOLICITATION PROVISIONS AND CONTRACT CLAUSES Texts of Provisions and Clauses 852.214-72... 2008) Bids on []* will be given equal consideration along with bids on []** and any such bids received... [].** * Contracting officer will insert an alternate item that is considered acceptable. ** Contracting officer will...

  8. An analysis on the export license criteria for NSG control items in the US and Japan

    International Nuclear Information System (INIS)

    Choi, Young Rok

    1995-06-01

    Korea has taken steps to join the Nuclear Suppliers Group (NSG) which is a major part of the international nuclear export control regime. In this connection, it is an urgent task to build a new Korean nuclear export control system that includes NSG guidelines and control items. In addition, it is necessary to review the developed supplier countries' experience in the field of export control. The main purpose of this study is to analyze how the US and Japan have controlled the items listed in NSG part 1 and 2 guidelines. To this end, various relevant regulations of the US and Japan were studied. Among those regulations, the US Export Administration Regulation, US 10 CFR 110 and 810, and the Japan's Export Administration Order are included. Through the review process, this study identified NSG items which are controlled in the export control systems of the US and Japan. Furthermore, this study summarized and compared the export license criteria that must be satisfied before exporting each NSG item in the two countries. The export license criteria consist of permitted destinations, document requirements, and types of license. The results of this study are expected to contribute to establishing an appropriate Korean nuclear export control system and could be used as references to the practical export licensing policies of the US and Japan. 6 tabs., 13 refs., (Author) .new

  9. An analysis on the export license criteria for NSG control items in the US and Japan

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Young Rok [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1995-06-01

    Korea has taken steps to join the Nuclear Suppliers Group (NSG) which is a major part of the international nuclear export control regime. In this connection, it is an urgent task to build a new Korean nuclear export control system that includes NSG guidelines and control items. In addition, it is necessary to review the developed supplier countries` experience in the field of export control. The main purpose of this study is to analyze how the US and Japan have controlled the items listed in NSG part 1 and 2 guidelines. To this end, various relevant regulations of the US and Japan were studied. Among those regulations, the US Export Administration Regulation, US 10 CFR 110 and 810, and the Japan`s Export Administration Order are included. Through the review process, this study identified NSG items which are controlled in the export control systems of the US and Japan. Furthermore, this study summarized and compared the export license criteria that must be satisfied before exporting each NSG item in the two countries. The export license criteria consist of permitted destinations, document requirements, and types of license. The results of this study are expected to contribute to establishing an appropriate Korean nuclear export control system and could be used as references to the practical export licensing policies of the US and Japan. 6 tabs., 13 refs., (Author) .new.

  10. 7 CFR 4290.1940 - Integration of this part with other regulations applicable to USDA's programs.

    Science.gov (United States)

    2010-01-01

    ... Agriculture (Continued) RURAL BUSINESS-COOPERATIVE SERVICE AND RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE RURAL BUSINESS INVESTMENT COMPANY (âRBICâ) PROGRAM Miscellaneous § 4290.1940 Integration of this... extent applicable to this part, the Secretary will comply with subpart D of 7 CFR part 1900 and RD...

  11. PSA approach for the evaluation of external hazards as part of CNSC Fukushima action items

    International Nuclear Information System (INIS)

    Xu, Michael; Yalaoui, Smain

    2014-01-01

    This paper introduces the PSA approach that Canadian licensees adopted to address the Canadian Nuclear Safety Commission (CNSC) Fukushima Action Items (FAIs) [1] with respect to external hazards evaluation. This paper focus on the FAIs specifically associated with the external hazard evaluation. It also briefly discusses the similarity and differences between the requirements of CNSC FAIs, the Western European Nuclear Regulators' Association (WENRA) Stress Test [2], and the USNRC 'Request for Information'[3]. This paper provides a status update on the completion of the FAIs by the Canadian licensees' and discusses the lessons learned from the implementation of these actions items. It also identifies the importance of a closer interaction between the CNSC and other government agencies for the characterization of as well as for the protection against the external natural hazards. It also highlights some other areas that include research projects on external hazards, combined methodologies from the licensees, etc. The views expressed in this paper are those of the authors and do not necessarily reflect those of CNSC, or any part thereof. All Canadian licensees are currently preparing their plant specific reports to address the relevant FAIs. Some preliminary hazards screening reports, as well as the reports for probabilistic seismic hazards analysis, external flood hazard and high wind hazard have been submitted to CNSC. CNSC, in conjunction other Canadian government agencies, are currently reviewing these reports to determine their acceptability. The licensees are expected to submit all required reports by the end of this year. In the meantime, other Fukushima actions requiring facility enhancements are underway for some licensees. These include: - acquiring additional emergency mitigating portable equipment, such as power generators and pumps, which can be stored onsite and offsite and used to bring reactors to a safe shutdown state, in the unlikely event of a

  12. BIG - a binary generator for testing digital devices

    International Nuclear Information System (INIS)

    Annuziata, M.; Sechi, G.

    1988-01-01

    This paper presents an unusual approach to the testing of digital devices. In order to test real time systems, we have designed, built, and used a digital generator able to send 2047 quadruples of 12-bit words, with a frequency range of up to 0.7 MHz. (orig.)

  13. Transit traverse in Missouri, 1900-1937. Part 7, Central Missouri, 1902-37

    Science.gov (United States)

    Staack, John George

    1940-01-01

    This bulletin, which for convenience is to be published in eight parts, contains the results of all transit traverse* done In Missouri through 1937 by the Geological Survey, United States Department of the Interior, including those heretofore published. (See page X.) Each of the parts deals with one of eight sections into which the State has been divided for this purpose and which have been designated northeastern, northwestern, southeastern, southwestern, central, east-central, south-central, and west-central Missouri. In each part descriptions of the points for which geodetic positions have been determined are listed according to the quadrangles in which the points occur. Results of transit traverse other than that done by the Geological Survey have not been included.Central Missouri, as the term is used in this bulletin and as the subject of part 7 of the bulletin, is that section of the State lying between latitudes 36°00' and 39°30' and between longitudes 92°00' and 93°30'.

  14. Macrostructural Treatment of Multi-word Lexical Items

    Directory of Open Access Journals (Sweden)

    Alenka Vrbinc

    2011-05-01

    Full Text Available The paper discusses the macrostructural treatment of multi-word lexical items in mono- and bilingual dictionaries. First, the classification of multi-word lexical items is presented, and special attention is paid to the discussion of compounds – a specific group of multi-word lexical items that is most commonly afforded headword status but whose inclusion in the headword list may also depend on spelling. Then the inclusion of multi-word lexical items in monolingual dictionaries is dealt with in greater detail, while the results of a short survey on the inclusion of five randomly chosen multi-word lexical items in seven English monolingual dictionaries are presented. The proposals as to how to treat these five multi-word lexical items in bilingual dictionaries are presented in the section about the inclusion of multi-word lexical items in bilingual dictionaries. The conclusion is that it is most important to take the users’ needs into consideration and to make any dictionary as user friendly as possible.

  15. Losing Items in the Psychogeriatric Nursing Home

    Directory of Open Access Journals (Sweden)

    J. van Hoof PhD

    2016-09-01

    Full Text Available Introduction: Losing items is a time-consuming occurrence in nursing homes that is ill described. An explorative study was conducted to investigate which items got lost by nursing home residents, and how this affects the residents and family caregivers. Method: Semi-structured interviews and card sorting tasks were conducted with 12 residents with early-stage dementia and 12 family caregivers. Thematic analysis was applied to the outcomes of the sessions. Results: The participants stated that numerous personal items and assistive devices get lost in the nursing home environment, which had various emotional, practical, and financial implications. Significant amounts of time are spent on trying to find items, varying from 1 hr up to a couple of weeks. Numerous potential solutions were identified by the interviewees. Discussion: Losing items often goes together with limitations to the participation of residents. Many family caregivers are reluctant to replace lost items, as these items may get lost again.

  16. Subnanosecond time-to-digital converter implemented in a Kintex-7 FPGA

    Science.gov (United States)

    Sano, Y.; Horii, Y.; Ikeno, M.; Sasaki, O.; Tomoto, M.; Uchida, T.

    2017-12-01

    Time-to-digital converters (TDCs) are used in various fields, including high-energy physics. One advantage of implementing TDCs in field-programmable gate arrays (FPGAs) is the flexibility on the modification of the logics, which is useful to cope with the changes in the experimental conditions. Recent FPGAs make it possible to implement TDCs with a time resolution less than 10 ps. On the other hand, various drift chambers require a time resolution of O(0.1) ns, and a simple and easy-to-implement TDC is useful for a robust operation. Herein an eight-channel TDC with a variable bin size down to 0.28 ns is implemented in a Xilinx Kintex-7 FPGA and tested. The TDC is based on a multisampling scheme with quad phase clocks synchronised with an external reference clock. Calibration of the bin size is unnecessary if a stable reference clock is available, which is common in high-energy physics experiments. Depending on the channel, the standard deviation of the differential nonlinearity for a 0.28 ns bin size is 0.13-0.31. The performance has a negligible dependence on the temperature. The power consumption and the potential to extend the number of channels are also discussed.

  17. Algebraically approximate and noisy realization of discrete-time systems and digital images

    CERN Document Server

    Hasegawa, Yasumichi

    2009-01-01

    This monograph deals with approximation and noise cancellation of dynamical systems which include linear and nonlinear input/output relationships. It also deal with approximation and noise cancellation of two dimensional arrays. It will be of special interest to researchers, engineers and graduate students who have specialized in filtering theory and system theory and digital images. This monograph is composed of two parts. Part I and Part II will deal with approximation and noise cancellation of dynamical systems or digital images respectively. From noiseless or noisy data, reduction will be

  18. Chinese librarianship in the digital era

    CERN Document Server

    Fang, Conghui

    2013-01-01

    The library in China has been transformed by rapid socioeconomic development, and the proliferation of the Internet. The issues faced by Chinese libraries andlibrarians are those faced by library practitioners more globally, however, China also has its own unique set of issues in the digital era, including developmental imbalance between East and West, urban and rural areas, and availability of skilled practitioners. Chinese Librarianship in the Digital Era is the first book on Chinese libraries responding to these issues, and more.The first part of the book places discussion in historical con

  19. Analisis Strategi Bersaing Gudang Digital YOGYAKARTA Dalam Memperluas Pasar

    OpenAIRE

    Nofrizal, Nofrizal

    2015-01-01

    : Gudang Digital is a company engaged in the retail photography in Yogyakarta that has been established for 7 years with hard work and patience Digital Warehouse successfully read consumer needs Yogyakarta, until now Digital Vault already has three branches and has a cafe and a photography class as for strategy they used is one stop shopping and cheapest.Selection of the appropriate strategy, Gudang Digital is one of the goals of this research to be able to survive in the competition in the r...

  20. ‘Forget me (not?’ – Remembering forget-items versus un-cued items in directed forgetting

    Directory of Open Access Journals (Sweden)

    Bastian eZwissler

    2015-11-01

    Full Text Available Humans need to be able to selectively control their memories. Here, we investigate the underlying processes in item-method directed forgetting and compare the classic active memory cues in this paradigm with a passive instruction. Typically, individual items are presented and each is followed by either a forget- or remember-instruction. On a surprise test of all items, memory is then worse for to-be-forgotten items (TBF compared to to-be-remembered items (TBR. This is thought to result from selective rehearsal of TBR, or from active inhibition of TBF, or from both. However, evidence suggests that if a forget instruction initiates active processing, paradoxical effects may also arise. To investigate the underlying mechanisms, four experiments were conducted where un-cued items (UI were introduced and recognition performance was compared between TBR, TBF and UI stimuli. Accuracy was encouraged via a performance-dependent monetary bonus. Across all experiments, including perceptually fully matched variants, memory accuracy for TBF was reduced compared to TBR, but better than for UI. Moreover, participants used a more conservative response criterion when responding to TBF stimuli. Thus, ironically, the F cue results in active processing, but this does not have inhibitory effects that would impair recognition memory beyond a un-cued baseline condition. This casts doubts on inhibitory accounts of item-method directed forgetting and is also difficult to reconcile with pure selective rehearsal of TBR. While the F-cue does induce active processing, this does not result in particularly successful forgetting. The pattern seems most consistent with the notion of ironic processing.

  1. Artifacts in digital radiography

    International Nuclear Information System (INIS)

    Min, Jung Whan; Kim, Jung Min; Jeong, Hoi Woun

    2015-01-01

    Digital Radiography is a big part of diagnostic radiology. Because uncorrected digital radiography image supported false effect of Patient’s health care. We must be manage the correct digital radiography image. Thus, the artifact images can have effect to make a wrong diagnosis. We report types of occurrence by analyzing the artifacts that occurs in digital radiography system. We had collected the artifacts occurred in digital radiography system of general hospital from 2007 to 2014. The collected data had analyzed and then had categorize as the occurred causes. The artifacts could be categorized by hardware artifacts, software artifacts, operating errors, system artifacts, and others. Hardware artifact from a Ghost artifact that is caused by lag effect occurred most frequently. The others cases are the artifacts caused by RF noise and foreign body in equipments. Software artifacts are many different types of reasons. The uncorrected processing artifacts and the image processing error artifacts occurred most frequently. Exposure data recognize (EDR) error artifacts, the processing error of commissural line, and etc., the software artifacts were caused by various reasons. Operating artifacts were caused when the user did not have the full understanding of the digital medical image system. System artifacts had appeared the error due to DICOM header information and the compression algorithm. The obvious artifacts should be re-examined, and it could result in increasing the exposure dose of the patient. The unclear artifact leads to a wrong diagnosis and added examination. The ability to correctly determine artifact are required. We have to reduce the artifact occurrences by understanding its characteristic and providing sustainable education as well as the maintenance of the equipments

  2. Artifacts in digital radiography

    Energy Technology Data Exchange (ETDEWEB)

    Min, Jung Whan [Dept. of Radiological Technology, Shin Gu University, Sungnam (Korea, Republic of); Kim, Jung Min [Dept. of Radiological Technology, Korea University, Seoul (Korea, Republic of); Jeong, Hoi Woun [Dept. of Radiological Technology, Beakseok Culture University, Cheonan (Korea, Republic of)

    2015-12-15

    Digital Radiography is a big part of diagnostic radiology. Because uncorrected digital radiography image supported false effect of Patient’s health care. We must be manage the correct digital radiography image. Thus, the artifact images can have effect to make a wrong diagnosis. We report types of occurrence by analyzing the artifacts that occurs in digital radiography system. We had collected the artifacts occurred in digital radiography system of general hospital from 2007 to 2014. The collected data had analyzed and then had categorize as the occurred causes. The artifacts could be categorized by hardware artifacts, software artifacts, operating errors, system artifacts, and others. Hardware artifact from a Ghost artifact that is caused by lag effect occurred most frequently. The others cases are the artifacts caused by RF noise and foreign body in equipments. Software artifacts are many different types of reasons. The uncorrected processing artifacts and the image processing error artifacts occurred most frequently. Exposure data recognize (EDR) error artifacts, the processing error of commissural line, and etc., the software artifacts were caused by various reasons. Operating artifacts were caused when the user did not have the full understanding of the digital medical image system. System artifacts had appeared the error due to DICOM header information and the compression algorithm. The obvious artifacts should be re-examined, and it could result in increasing the exposure dose of the patient. The unclear artifact leads to a wrong diagnosis and added examination. The ability to correctly determine artifact are required. We have to reduce the artifact occurrences by understanding its characteristic and providing sustainable education as well as the maintenance of the equipments.

  3. Broadband direct RF digitization receivers

    CERN Document Server

    Jamin, Olivier

    2014-01-01

    This book discusses the trade-offs involved in designing direct RF digitization receivers for the radio frequency and digital signal processing domains.  A system-level framework is developed, quantifying the relevant impairments of the signal processing chain, through a comprehensive system-level analysis.  Special focus is given to noise analysis (thermal noise, quantization noise, saturation noise, signal-dependent noise), broadband non-linear distortion analysis, including the impact of the sampling strategy (low-pass, band-pass), analysis of time-interleaved ADC channel mismatches, sampling clock purity and digital channel selection. The system-level framework described is applied to the design of a cable multi-channel RF direct digitization receiver. An optimum RF signal conditioning, and some algorithms (automatic gain control loop, RF front-end amplitude equalization control loop) are used to relax the requirements of a 2.7GHz 11-bit ADC. A two-chip implementation is presented, using BiCMOS and 65nm...

  4. Are Adult Educators and Learners "Digital Immigrants"? Examining the Evidence and Impacts for Continuing Education

    Science.gov (United States)

    Smith, Erika

    2013-01-01

    Over the past decade, Prensky's distinctions between "digital immigrants" and "digital natives" have been oft-referenced. Much has been written about digital native students as a part of the Net generation or as Millennials. However, little work fully considers the impact of digital immigrant discourse within the fields of…

  5. Test on the reactor with the portable digital reactivity meter for physical experiment

    International Nuclear Information System (INIS)

    Huang Liyuan

    2010-01-01

    Test must be performed on the zero power reactor During the development of portable digital reactivity meter for physical experiment, in order to check its measurement function and accuracy. It describes the test facility, test core, test methods, test items and test results. The test results show that the instrument satisfy the requirements of technical specification, and satisfy the reactivity measurement in the physical experiments on reactors. (authors)

  6. Vending Machines: A Narrative Review of Factors Influencing Items Purchased.

    Science.gov (United States)

    Hua, Sophia V; Ickovics, Jeannette R

    2016-10-01

    Vending machines are a ubiquitous part of our food environments. Unfortunately, items found in vending machines tend to be processed foods and beverages high in salt, sugar, and/or fat. The purpose of this review is to describe intervention and case studies designed to promote healthier vending purchases by consumers and identify which manipulations are most effective. All studies analyzed were intervention or case studies that manipulated vending machines and analyzed sales or revenue data. This literature review is limited to studies conducted in the United States within the past 2 decades (ie, 1994 to 2015), regardless of study population or setting. Ten articles met these criteria based on a search conducted using PubMed. Study manipulations included price changes, increase in healthier items, changes to the advertisements wrapped around vending machines, and promotional signs such as a stoplight system to indicate healthfulness of items and to remind consumers to make healthy choices. Overall, seven studies had manipulations that resulted in statistically significant positive changes in purchasing behavior. Two studies used manipulations that did not influence consumer behavior, and one study was equivocal. Although there was no intervention pattern that ensured changes in purchasing, price reductions were most effective overall. Revenue from vending sales did not change substantially regardless of intervention, which will be important to foster initiation and sustainability of healthier vending. Future research should identify price changes that would balance healthier choices and revenue as well as better marketing to promote purchase of healthier items. Copyright © 2016 Academy of Nutrition and Dietetics. Published by Elsevier Inc. All rights reserved.

  7. Digital workflows in contemporary orthodontics

    Directory of Open Access Journals (Sweden)

    Lars R Christensen

    2017-01-01

    Full Text Available Digital workflows are now increasingly possible in orthodontic practice. Workflows designed to improve the customization of orthodontic appliances are now available through laboratories and orthodontic manufacturing facilities in many parts of the world. These now have the potential to improve certain aspects of patient care.

  8. Port Alexander Alaska Coastal Digital Elevation Model

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — NOAA's National Geophysical Data Center (NGDC) is building high-resolution digital elevation models (DEMs) to support individual coastal States as part of the...

  9. Bridging storytelling traditions with digital technology.

    Science.gov (United States)

    Cueva, Melany; Kuhnley, Regina; Revels, Laura J; Cueva, Katie; Dignan, Mark; Lanier, Anne P

    2013-01-01

    The purpose of this project was to learn how Community Health Workers (CHWs) in Alaska perceived digital storytelling as a component of the "Path to Understanding Cancer" curriculum and as a culturally respectful tool for sharing cancer-related health messages. A pre-course written application, end-of-course written evaluation, and internet survey informed this project. Digital storytelling was included in seven 5-day cancer education courses (May 2009-2012) in which 67 CHWs each created a personal 2-3 minute cancer-related digital story. Participant-chosen digital story topics included tobacco cessation, the importance of recommended cancer screening exams, cancer survivorship, loss, grief and end-of-life comfort care, and self-care as patient care providers. All participants completed an end-of-course written evaluation. In July 2012, contact information was available for 48 participants, of whom 24 completed an internet survey. All 67 participants successfully completed a digital story which they shared and discussed with course members. On the written post-course evaluation, all participants reported that combining digital storytelling with cancer education supported their learning and was a culturally respectful way to provide health messages. Additionally, 62 of 67 CHWs reported that the course increased their confidence to share cancer information with their communities. Up to 3 years post-course, all 24 CHW survey respondents reported they had shown their digital story. Of note, 23 of 24 CHWs also reported change in their own behavior as a result of the experience. All CHWs, regardless of computer skills, successfully created a digital story as part of the cancer education course. CHWs reported that digital stories enhanced their learning and were a culturally respectful way to share cancer-related information. Digital storytelling gave the power of the media into the hands of CHWs to increase their cancer knowledge, facilitate patient and community cancer

  10. Rhizomatic, digital habitat

    DEFF Research Database (Denmark)

    Kjærgaard, Thomas; Sorensen, Elsebeth Korsgaard

    2014-01-01

    are social in a connected rhizomatic network then information sharing, knowledge production and technology embody a strong synergetic entity. The study suggests that technologies used to create ’digital habitats’ are likely to enhance learning and motivation and allow new creative ways of working......’Homo conexus’ is used as a metaphor for the alleged next evolution of homo sapiens, an evolution that prepares us for knowledge production in the technology rich ‘network society’. This paper describes an experiment with network learning utilizing collaborative web technologies in a cooperative...... learning environment in college education. The pedagogic design focuses on the individual learner’s role in the group and on the group as a part of a larger digital, learning cooperative. The authors use the notion of the rhizome as a metaphor for learning in ’the postmodern state’ of information sharing...

  11. Digital Microdroplet Ejection Technology-Based Heterogeneous Objects Prototyping

    OpenAIRE

    Li, Na; Yang, Jiquan; Feng, Chunmei; Yang, Jianfei; Zhu, Liya; Guo, Aiqing

    2016-01-01

    An integrate fabrication framework is presented to build heterogeneous objects (HEO) using digital microdroplets injecting technology and rapid prototyping. The heterogeneous materials part design and manufacturing method in structure and material was used to change the traditional process. The net node method was used for digital modeling that can configure multimaterials in time. The relationship of material, color, and jetting nozzle was built. The main important contributions are to combi...

  12. Using an FSDS-R Item to Screen for Sexually Related Distress: A MsFLASH Analysis

    Directory of Open Access Journals (Sweden)

    Janet S. Carpenter, PhD, RN, FAAN

    2015-03-01

    Conclusions: A single FSDS-R item may be a useful screening tool to quickly identify midlife women with sexually related distress when it is not feasible to administer the entire scale, though further validation is warranted. Carpenter JS, Reed SD, Guthrie KA, Larson JC, Newton KM, Lau RJ, Learman LA, and Shifren JL. Using an FSDS-R item to screen for sexually related distress: A MsFLASH analysis. Sex Med 2015;3:7–13.

  13. Selection of useful items for fall risk screening for community dwelling Japanese elderly from the perspective of fall experience, physical function, and age level differences.

    Science.gov (United States)

    Demura, Shinichi; Yamada, Takayoshi; Uchiyama, Masanobu; Sugiura, Hiroki; Hamazaki, Hiroshi

    2011-01-01

    This study aimed to examine useful items for screening the fall risk of community dwelling elderly from various perspectives, including fall experience, physical function level, and age level difference. 968 independently living elderly persons over the age of 60 (age: 70.0 ± 7.0) responded to 80 fall risk items representing 7 factors (physical function, fall history, using devices, fear of falling and inactivity, dosing, disease and disability, and environment) and an ADL questionnaire. The high fall risk response rate was calculated for each item and tested for statistical significance among age groups and those with and without fall experience. Cramer's V was calculated to examine the relationship between each item and the ADL. In addition, we selected items with significant differences in the high fall risk response rates between the faller and the non-faller groups, a significant relationship with ADL, and a significant difference among age groups. A total of 40 useful items were selected from each fall risk factor (decrease in physical function: 21 items, fall history: 2 items, device usage: 3 items, fear of falling and inactivity: 5 items, dosing: 0 items, disease and disability: 8 items, and environment: 1 item). Selected items can comprehensively and properly assess the fall risk of the healthy elderly as compared with existing questionnaires. Copyright © 2010 Elsevier Ireland Ltd. All rights reserved.

  14. Image processing by use of the digital cross-correlator

    International Nuclear Information System (INIS)

    Katou, Yoshinori

    1982-01-01

    We manufactured for trial an instrument which achieved the image processing using digital correlators. A digital correlator perform 64-bit parallel correlation at 20 MH. The output of a digital correlator is a 7-bit word representing. An A-D converter is used to quantize it a precision of six bits. The resulting 6-bit word is fed to six correlators, wired in parallel. The image processing achieved in 12 bits, whose digital outputs converted an analog signal by a D-A converter. This instrument is named the digital cross-correlator. The method which was used in the image processing system calculated the convolution with the digital correlator. It makes various digital filters. In the experiment with the image processing video signals from TV camera were used. The digital image processing time was approximately 5 μs. The contrast was enhanced and smoothed. The digital cross-correlator has the image processing of 16 sorts, and was produced inexpensively. (author)

  15. High speed digital TDC for D0 vertex reconstruction

    International Nuclear Information System (INIS)

    Gao Guosheng; Partridge, R.

    1992-01-01

    A high speed digital TDC has been built as part of the Level 0 trigger for the D0 experiment at Fermilab. The digital TDC is used to make a fast determination of the primary vertex position by timing the arrival time of beam jets detected in the Level 0 counters. The vertex position is then used by the Level 1 trigger to determine the proper sinθ weighting factors for calculation transverse energies. Commercial GaAs integrated circuits are used in the digital TDC to obtain a time resolution of σ t == 226 ps

  16. Human Resources Marketing and Recruiting: Essentials of Digital Recruiting

    CERN Document Server

    Purvis, James

    2016-01-01

    This chapter will cover digital recruitment from its definition thru to its history in recruitment and trends. The subject itself could cover an entire book or an entire module at university, so this chapter will broadly touch upon the key elements and considerations. Under cultural perspective, the recruitment life cycle will be broken down into its individual parts, and digital solutions will be examined for each individual part of the process together with the impact this has on the knowledge and challenges for the manager and team. The economic perspective will assist in prioritizing initiatives and building a business case for the introduction of digital recruiting solutions. The risk perspective will raise awareness of the potential pitfalls and the operational perspective on the key considerations for a successful implementation. Finally, the key messages of this chapter are summarized in the Do’s and Don’ts.

  17. Analog and digital signal analysis from basics to applications

    CERN Document Server

    Cohen Tenoudji, Frédéric

    2016-01-01

    This book provides comprehensive, graduate-level treatment of analog and digital signal analysis suitable for course use and self-guided learning. This expert text guides the reader from the basics of signal theory through a range of application tools for use in acoustic analysis, geophysics, and data compression. Each concept is introduced and explained step by step, and the necessary mathematical formulae are integrated in an accessible and intuitive way. The first part of the book explores how analog systems and signals form the basics of signal analysis. This section covers Fourier series and integral transforms of analog signals, Laplace and Hilbert transforms, the main analog filter classes, and signal modulations. Part II covers digital signals, demonstrating their key advantages. It presents z and Fourier transforms, digital filtering, inverse filters, deconvolution, and parametric modeling for deterministic signals. Wavelet decomposition and reconstruction of non-stationary signals are also discussed...

  18. Item response theory applied to factors affecting the patient journey towards hearing rehabilitation

    Directory of Open Access Journals (Sweden)

    Michelene Chenault

    2016-11-01

    Full Text Available To develop a tool for use in hearing screening and to evaluate the patient journey towards hearing rehabilitation, responses to the hearing aid rehabilitation questionnaire scales aid stigma, pressure, and aid unwanted addressing respectively hearing aid stigma, experienced pressure from others; perceived hearing aid benefit were evaluated with item response theory. The sample was comprised of 212 persons aged 55 years or more; 63 were hearing aid users, 64 with and 85 persons without hearing impairment according to guidelines for hearing aid reimbursement in the Netherlands. Bias was investigated relative to hearing aid use and hearing impairment within the differential test functioning framework. Items compromising model fit or demonstrating differential item functioning were dropped. The aid stigma scale was reduced from 6 to 4, the pressure scale from 7 to 4, and the aid unwanted scale from 5 to 4 items. This procedure resulted in bias-free scales ready for screening purposes and application to further understand the help-seeking process of the hearing impaired.

  19. Digital subtraction angiography in patients with central vertigo

    International Nuclear Information System (INIS)

    Inamori, Toru; Takayasu, Yukio; Umetani, Yoshio; Taruoka, Akinori.

    1985-01-01

    Digital subtraction angiography (DSA) is a recently developed non-invasive intravenous angiography which has become possible through real time digital subtraction of x-ray transmission data from an image intensifier and television system. The output signals of the image intensifier-television camera system are digitized by an analog-digital converter. The digital information, 512x512 pixels and 9 bits deep, is fed into the image processing assembly after logarithmic amplification, where 2-8 frames are added and subtracted from mask images for the final digital images. Intravenous digital subtraction angiography was performed in 21 patients with intractable dizzy spells of central origin resistant to treatment. These patients showed some signs of CNS disturbance, although there were no significant findings on CT scans. Surprisingly, findings were abnormal in 14 of 21 patients (66.7%). DSA is, therefore, considered to be an important aid in the diagnosis of vertigo of the central type. (J.P.N.)

  20. Inclusão digital: sistema de engrenagens | Digital inclusion: systems of gears

    Directory of Open Access Journals (Sweden)

    Diana Cubillos

    2009-04-01

    Palavras-chave inclusão digital; economia política; política de informação Abstract The notion of digital inclusion, present in the scientific field as well as in social life, a way in field scientific, how much in the practical life, it has generated studies on the question however as combat the battling social inequality in the comprehension of mechanisms of differentiation between rich and poor, to understand the different mechanisms between rich and poor, however and served as an economic instrument based on the knowledge and technological advance progress. The results are relevant insofar as accomplishment of this reflection is excellent, a time that the technological advancement have has stimulated transformations in the local and global political economy and in the new world order: frantic and unquestioned consumption and without questioning. The digital inclusion is here compared to a system of gears. These parts that if they interconnect for the functioning of a system are seen here in this context here treat, as information policies inserted of in the criminal public actions. These actions establish a connection with the tools of information and communication technologies (TICs that in their turn it is are connected with the social actors, who, for diverse reasons, find themselves excluded from of chances opportunities, goods and hopes for the future visions. Keywords digital inclusion; political economy; informational policies