WorldWideScience

Sample records for part application area

  1. Petri nets - part 1: concepts and application areas

    International Nuclear Information System (INIS)

    Sivertsen, Terje

    2004-03-01

    There exist a number of models, languages, methods, and tools that support the specification and analysis of system requirements. One important class comprises graphical methods based on the concept of Petri nets. Due to the wide variety of applications, these methods are relevant also in research and applications outside the digital systems safety domain. The present report constitutes the first of three parts of a unified exposition of graphical methods based on the concept of Petri nets. The report provides an introduction to basic concepts of Petri nets and an overview of a wide variety of application areas. The second part of the trilogy will present a number of techniques and tools. The third part will focus on analysis. Petri nets have been proposed for a wide variety of applications, and new areas are considered as new challenges emerge from scientific, technological, and social developments. The wide variety of application areas reflects a broad interest in Petri nets, coming from diverse directions. Empirically, as well as theoretically, there are good reasons to claim that Petri nets are applicable for many different kinds of problems. What is common to the different applications and problems addressed is the need for a formalism that allows adequate representation of important system characteristics like concurrency, asyncronicity, distribution, parallelism, and non-determinism. Several of the references in the report discuss NPP-related applications, or applications with great potentials for technology transfer from other areas to the nuclear domain. (Author)

  2. Soybean Protein Fibres Part 2: Soybean Fibres Properties and Application Areas

    Directory of Open Access Journals (Sweden)

    Fatma Filiz Yıldırım

    2015-01-01

    Full Text Available Soybean protein fibres (SPF, which is a protein based botanic fibre, has various beneficialproperties such as softness, brightness, smoothness, drape, UV and bacterial resistance. These fibers areused in production of various yarn blends, woven, knit and nonwoven fabrics to manufature apperal andhome textiles such as t-shirts, bedding, sweater and baby dress due to these superior properties. This review,about SPF, is divided into two sections. In the first part; structure and production stages of SPF and itsenviromental effects had been described. In the second part of this review, properties and application areasof SPF have been described.

  3. Theses in the area of nanotechnologies and nanomaterials: novelties and practical application. Part 1

    Directory of Open Access Journals (Sweden)

    KARPOV Alexey Ivanovich

    2016-02-01

    Full Text Available To popularize scientific achievements the main results of Russian and foreign scientists’ research are published in the form of abstract. The authors of the research «Nanomodified composite binder for special construction mortars» study how microsize hydrosilicates of barium influence on the hardening time of composite binder. The content of nonsolvent in the barium hydrosilicates synthesis was varied from 60 to 100% from stoichiometric and the content of the additive in the composite binder –from 5 to 40%. The variation of the hardening time has the complex characteristics. Thus introduction of 5% of barium hydrosilicates obtained by precipitation with the use of 100% nonsolvent reduces hardening process insignificantly. If the number of them is increased the rate of hardening is higher. That can be explained in the following way: barium hydrosilicates are the artificially synthesized analogues of the cement stone hydratation products. As their number increases, the distance between separate particles decreases. Therefore synthesized products of hydratation of cement stone interact with silicic acid which is a part of the additive, and the nuclei of calcium hydrosilicates – crystallization centers – form. These conditions favour the acceleration of cement hydratation and increase of hydratation products. That leads to acceleration of crystallizaion process of calcium hydrosilicate and thus to acceleration of hardening time. The specialists may be also interested in the following research: «Foam concrete with nanostructured modifier», «The development of new types of functional materials based on hybride compounds of titanium dioxide with cellulose», «Synthesis and properties of nanosilica stabilized by ligands», «The influence of hydrate forms of nanosized titanium dioxide produced with sol-gel method on electrorheological and photocatalytical properties of systems based on it», «Deformation and thermal behaviour of structure

  4. Colorado SIP: 5 CCR 1001-13, Reg 11, Motor Vehicle Emissions Inspection Program—Part A, General Provisions, Area of Applicability, Schedules for Obtaining Certification of Emissions Control, Definitions, Exemptions, and Clean Screening/Remote Sensing

    Science.gov (United States)

    Colorado SIP: 5 CCR 1001-13, Reg 11, Motor Vehicle Emissions Inspection Program—Part A, General Provisions, Area of Applicability, Schedules for Obtaining Certification of Emissions Control, Definitions, Exemptions, and Clean Screening/Remote Sensing

  5. Nonceramic insulators for the transmission power lines. Part II: Application that it requires of a careful selection; Aisladores no ceramicos para las areas de transmision. Parte II: Aplicacion que requiere de una seleccion cuidadosa

    Energy Technology Data Exchange (ETDEWEB)

    Fierro Chavez, Jose Luis [Instituto de Investigaciones Electricas, Temixco, Morelos (Mexico)

    1999-07-01

    In this second part is mentioned the possible mechanisms of degradation that can appear in nonceramic insulators in order to identify them during the inspections that are made in the field throughout their useful life. Some techniques of evaluation of accelerated aging, as well as important aspects that must be considered for the selection of the insulation in the case of a particular application, are presented. [Spanish] En esta segunda parte se mencionan los posibles mecanismos de degradacion que pueden presentarse en los aisladores no ceramicos a fin de identificarlos durante las inspecciones que se realicen en campo a lo largo de su vida util. Se exponen algunas tecnicas de evaluacion de envejecimiento acelerado, asi como aspectos importantes que deben considerarse para la seleccion del aislamiento en el caso de una aplicacion particular.

  6. Modelo computacional para suporte à decisão em áreas irrigadas. Parte II: testes e aplicação Computer model for decision support in irrigated areas. Part II: tests and application

    Directory of Open Access Journals (Sweden)

    Paulo A. Ferreira

    2006-12-01

    Full Text Available Apresentou-se, na Parte I desta pesquisa, o desenvolvimento de um modelo computacional denominado MCID, para suporte à tomada de decisão quanto ao planejamento e manejo de projetos de irrigação e/ou drenagem. Objetivou-se, na Parte II, testar e aplicar o MCID. No teste comparativo com o programa DRAINMOD, espaçamentos entre drenos, obtidos com o MCID, foram ligeiramente maiores ou idênticos. Os espaçamentos advindos com o MCID e o DRAINMOD foram consideravelmente maiores que os obtidos por meio de metodologias tradicionais de dimensionamento de sistemas de drenagem. A produtividade relativa total, YRT, obtida com o MCID foi, em geral, inferior à conseguida com o DRAINMOD, devido a diferenças de metodologia ao se estimar a produtividade da cultura em resposta ao déficit hídrico. Na comparação com o programa CROPWAT, obtiveram-se resultados muito próximos para (YRT e evapotranspiração real. O modelo desenvolvido foi aplicado para as condições do Projeto Jaíba, MG, para culturas perenes e anuais cultivadas em diferentes épocas. Os resultados dos testes e aplicações indicaram a potencialidade do MCID como ferramenta de apoio à decisão em projetos de irrigação e/ou drenagem.Part I of this research presented the development of a decision support model, called MCID, for planning and managing irrigation and/or drainage projects. Part II is aimed at testing and applying MCID. In a comparative test with the DRAINMOD model, drain spacings obtained with MCID were slightly larger or identical. The spacings obtained with MCID and DRAINMOD were considerably larger than those obtained through traditional methodologies of design of drainage systems. The relative crop yield (YRT obtained with MCID was, in general, lower than the one obtained with DRAINMOD due to differences in the estimate of crop response to water deficit. In comparison with CROPWAT, very close results for YRT and for actual evapotranspiration were obtained. The

  7. Comparing fish communities in sanctuaries, partly protected areas ...

    African Journals Online (AJOL)

    Within coral-dominated reefs, abundances of indicator taxa showed three patterns: (1) greatest abundance in sanctuaries, intermediate in partly protected and least in open areas; (2) greatest abundance in sanctuaries but equal diminishment in partly protected and open areas; and (3) greater depletion in partly protected ...

  8. Design, revision, and application of ground-water flow models for simulation of selected water-management scenarios in the coastal area of Georgia and adjacent parts of South Carolina and Florida

    Science.gov (United States)

    Clarke, John S.; Krause, Richard E.

    2000-01-01

    Ground-water flow models of the Floridan aquifer system in the coastal area of Georgia and adjacent parts of South Carolina and Florida, were revised and updated to ensure consistency among the various models used, and to facilitate evaluation of the effects of pumping on the ground-water level near areas of saltwater contamination. The revised models, developed as part of regional and areal assessments of ground-water resources in coastal Georgia, are--the Regional Aquifer-System Analysis (RASA) model, the Glynn County area (Glynn) model, and the Savannah area (Savannah) model. Changes were made to hydraulic-property arrays of the RASA and Glynn models to ensure consistency among all of the models; results of theses changes are evidenced in revised water budgets and calibration statistics. Following revision, the three models were used to simulate 32 scenarios of hypothetical changes in pumpage that ranged from about 82 million gallons per day (Mgal/d) lower to about 438 Mgal/d higher, than the May 1985 pumping rate of 308 Mgal/d. The scenarios were developed by the Georgia Department of Natural Resources, Environmental Protection Division and the Chatham County-Savannah Metropolitan Planning Commission to evaluate water-management alternatives in coastal Georgia. Maps showing simulated ground-water-level decline and diagrams presenting changes in simulated flow rates are presented for each scenario. Scenarios were grouped on the basis of pumping location--entire 24-county area, central subarea, Glynn-Wayne-Camden County subarea, and Savannah-Hilton Head Island subarea. For those scenarios that simulated decreased pumpage, the water level at both Brunswick and Hilton Head Island rose, decreasing the hydraulic gradient and reducing the potential for saltwater contamination. Conversely, in response to scenarios of increased pumpage, the water level at both locations declined, increasing the hydraulic gradient and increasing the potential for saltwater contamination

  9. Accomplish the Application Area in Cloud Computing

    OpenAIRE

    Bansal, Nidhi; Awasthi, Amit

    2012-01-01

    In the cloud computing application area of accomplish, we find the fact that cloud computing covers a lot of areas are its main asset. At a top level, it is an approach to IT where many users, some even from different companies get access to shared IT resources such as servers, routers and various file extensions, instead of each having their own dedicated servers. This offers many advantages like lower costs and higher efficiency. Unfortunately there have been some high profile incidents whe...

  10. Frontal cephalometrics: practical applications, part 2.

    Science.gov (United States)

    Grummons, Duane; Ricketts, Robert M

    2004-01-01

    To (1) demonstrate the needs and benefits of three-dimensional diagnostic and treatment applications; (2) illustrate practical clinical applications of anteroposterior images and frontal analysis; and (3) enhance utilization of the Ricketts and Grummons frontal analyses. Frontal analysis methods and applications are specified and integrated into facial, smile, jaw, and occlusal therapies. Asymmetry conditions must be differentially diagnosed and effectively treated. Frontal and related image analysis and tracing steps are detailed. Asymmetry of facial parts is the rule, rather than the exception. Dental and facial midlines, occlusal plane, chin location, and smile esthetics are primarily emphasized. Beautiful facial proportions and smile harmony can be developed despite initial facial dysmorphosis and disproportions. Patients view themselves from the frontal perspective, so this carries priority when assessing problems. It is important to know the etiology of asymmetry to assist others with genetic counseling. Facial harmony and smile beauty are optimal when facial and maxillary dental midlines are aligned. The maxillary dentition width should be sufficiently wide to be in harmony with the individual patient facial morphology. The occlusal plane should be level and the chin centered as much as possible. Best facial development and proportionality exist when the skeletal and dental components are optimized transversely and are symmetric.

  11. Application areas of 3D bioprinting.

    Science.gov (United States)

    Ozbolat, Ibrahim T; Peng, Weijie; Ozbolat, Veli

    2016-08-01

    Three dimensional (3D) bioprinting has been a powerful tool in patterning and precisely placing biologics, including living cells, nucleic acids, drug particles, proteins and growth factors, to recapitulate tissue anatomy, biology and physiology. Since the first time of cytoscribing cells demonstrated in 1986, bioprinting has made a substantial leap forward, particularly in the past 10 years, and it has been widely used in fabrication of living tissues for various application areas. The technology has been recently commercialized by several emerging businesses, and bioprinters and bioprinted tissues have gained significant interest in medicine and pharmaceutics. This Keynote review presents the bioprinting technology and covers a first-time comprehensive overview of its application areas from tissue engineering and regenerative medicine to pharmaceutics and cancer research. Copyright © 2016 Elsevier Ltd. All rights reserved.

  12. GSTARS computer models and their applications, Part II: Applications

    Science.gov (United States)

    Simoes, F.J.M.; Yang, C.T.

    2008-01-01

    In part 1 of this two-paper series, a brief summary of the basic concepts and theories used in developing the Generalized Stream Tube model for Alluvial River Simulation (GSTARS) computer models was presented. Part 2 provides examples that illustrate some of the capabilities of the GSTARS models and how they can be applied to solve a wide range of river and reservoir sedimentation problems. Laboratory and field case studies are used and the examples show representative applications of the earlier and of the more recent versions of GSTARS. Some of the more recent capabilities implemented in GSTARS3, one of the latest versions of the series, are also discussed here with more detail. ?? 2008 International Research and Training Centre on Erosion and Sedimentation and the World Association for Sedimentation and Erosion Research.

  13. Hydrology of Ranger land application area

    International Nuclear Information System (INIS)

    McQuade, C.V.

    1992-01-01

    In 1984 Ranger Uranium Mines (RUM) began assessing the technique of water treatment by land application as a means of reducing the volume of stored water within the Restricted Release Zone. Knowledge of the hydrological characteristics of the treatment site is necessary for optimal day to day and season to season operation of the system and as an input into the assessment of the long-term viability of the site. This paper provides background information on the hydrological requirements for a water treatment site, describes the RUM's water treatment by land application system and summarises the operational statistics and current hydrological knowledge of the site. The general groundwater hydrology of the area comprises a surface soil aquifer overlying a semi-confined aquifer. Drainage of the surface aquifer follows the surface topography along the sandy clays. Vertical permeability ranges between 3 and 12 times greater than horizontal permeability. 7 refs., 2 tabs., 4 figs

  14. Proposed Methodology for Establishing Area of Applicability

    International Nuclear Information System (INIS)

    Broadhead, B.L.; Hopper, C.M.; Parks, C.V.

    1999-01-01

    This paper presents the application of sensitivity and uncertainty (S/U) analysis methodologies to the data validation tasks of a criticality safety computational study. The S/U methods presented are designed to provide a formal means of establishing the area (or range) of applicability for criticality safety data validation studies. The development of parameters that are analogous to the standard trending parameters form the key to the technique. These parameters are the so-called D parameters, which represent the differences by energy group of S/U-generated sensitivity profiles, and c parameters, which are the k correlation coefficients, each of which give information relative to the similarity between pairs of selected systems. The use of a Generalized Linear Least-Squares Methodology (GLLSM) tool is also described in this paper. These methods and guidelines are also applied to a sample validation for uranium systems with enrichments greater than 5 wt %

  15. 47 CFR 27.3 - Other applicable rule parts.

    Science.gov (United States)

    2010-10-01

    ... standards and procedures concerning the marketing and importation of radio frequency devices, and for.... This part sets forth the requirements and conditions applicable to commercial mobile radio service providers. (h) Part 22. This part sets forth the requirements and conditions applicable to public mobile...

  16. 47 CFR 90.5 - Other applicable rule parts.

    Science.gov (United States)

    2010-10-01

    ... MOBILE RADIO SERVICES General Information § 90.5 Other applicable rule parts. Other Commission rule parts..., and treaties. This part also contains standards and procedures concerning marketing of radio frequency... contains rules relating to commercial mobile radio services. (i) Part 20 which governs commercial mobile...

  17. Extended equal areas criterion: foundations and applications

    Energy Technology Data Exchange (ETDEWEB)

    Yusheng, Xue [Nanjim Automation Research Institute, Nanjim (China)

    1994-12-31

    The extended equal area criterion (EEAC) provides analytical expressions for ultra fast transient stability assessment, flexible sensitivity analysis, and means to preventive and emergency controls. Its outstanding performances have been demonstrated by thousands upon thousands simulations on more than 50 real power systems and by on-line operation records in an EMS environment of Northeast China Power System since September 1992. However, the researchers have mainly based on heuristics and simulations. This paper lays a theoretical foundation of EEAC and brings to light the mechanism of transient stability. It proves true that the dynamic EEAC furnishes a necessary and sufficient condition for stability of multi machine systems with any detailed models, in the sense of the integration accuracy. This establishes a new platform for further advancing EEAC and better understanding of problems. An overview of EEAC applications in China is also given in this paper. (author) 30 refs.

  18. Nanomedicine: Application Areas and Development Prospects

    Directory of Open Access Journals (Sweden)

    Consolación Melguizo

    2011-05-01

    Full Text Available Nanotechnology, along with related concepts such as nanomaterials, nanostructures and nanoparticles, has become a priority area for scientific research and technological development. Nanotechnology, i.e., the creation and utilization of materials and devices at nanometer scale, already has multiple applications in electronics and other fields. However, the greatest expectations are for its application in biotechnology and health, with the direct impact these could have on the quality of health in future societies. The emerging discipline of nanomedicine brings nanotechnology and medicine together in order to develop novel therapies and improve existing treatments. In nanomedicine, atoms and molecules are manipulated to produce nanostructures of the same size as biomolecules for interaction with human cells. This procedure offers a range of new solutions for diagnoses and “smart” treatments by stimulating the body’s own repair mechanisms. It will enhance the early diagnosis and treatment of diseases such as cancer, diabetes, Alzheimer’s, Parkinson’s and cardiovascular diseases. Preventive medicine may then become a reality.

  19. Partly occupied Wannier functions: Construction and applications

    DEFF Research Database (Denmark)

    Thygesen, Kristian Sommer; Hansen, Lars Bruno; Jacobsen, Karsten Wedel

    2005-01-01

    We have developed a practical scheme to construct partly occupied, maximally localized Wannier functions (WFs) for a wide range of systems. We explain and demonstrate how the inclusion of selected unoccupied states in the definition of the WFs can improve both their localization and symmetry...

  20. CYCLODEXTRINS - FIELFS OF APPLICATION. PART II

    Directory of Open Access Journals (Sweden)

    Gh. Duca

    2012-12-01

    Full Text Available This paper represents an analysis of potential and current applications of cyclodextrins as biologically active substances in medicine. The main applications described here include use of cyclodextrins as agents that form inclusion complexes with endogenous substances (membrane lipids, cellular cholesterol, agents that form inclusion complexes with exogenous substances with their man role as guest molecules (sugammadex, FBCx, agents that block endogenous and exogenous macromolecules (ion channels, anthrax toxin, α-hemolysin, and agents which activity is based on the chemical nature of them and of their derivatives (cyclodextrin polysulphate derivatives. The fi rst classifi cation for medically important biological activity of cyclodextrins has been proposed.

  1. Technology and applications of broad-beam ion sources used in sputtering. Part II. Applications

    International Nuclear Information System (INIS)

    Harper, J.M.E.; Cuomo, J.J.; Kaufman, H.R.

    1982-01-01

    The developments in broad-beam ion source technology described in the companion paper (Part I) have stimulated a rapid expansion in applications to materials processing. These applications are reviewed here, beginning with a summary of sputtering mechanisms. Next, etching applications are described, including microfabrication and reactive ion beam etching. The developing area of surface layer applications is summarized, and related to the existing fields of oxidation and implantation. Next, deposition applications are reviewed, including ion-beam sputter deposition and the emerging technique of ion-assisted vapor deposition. Many of these applications have been stimulated by the development of high current ion sources operating in the energy range of tens of hundreds of eV. It is in this energy range that ion-activated chemical etching is efficient, self-limiting compound layers can be grown, and the physical properties of vapor-deposited films can be modified. In each of these areas, broad ion beam technology provides a link between other large area plasma processes and surface analytical techniques using ion beams

  2. Fourier Transform Infrared Spectroscopy Part III. Applications.

    Science.gov (United States)

    Perkins, W. D.

    1987-01-01

    Discusses the use of the FT-IR spectrometer in analyses that were previously avoided. Examines some of the applications of this spectroscopy with aqueous solutions, circular internal reflection, samples with low transmission, diffuse reflectance, infrared emission, and the infrared microscope. (TW)

  3. Solar cells for space applications (part 2)

    International Nuclear Information System (INIS)

    Gomez, T.J.

    1992-01-01

    This lecture focusses on qualification and verification tests and procedures on solar cells designed for space applications. The series of tests should produce orbital performance under determined illumination, temperature and irradiance. Tests are divided in outdoor and laboratory experiments. Environmental tests include durability, qualification (mechanical and electrical), I-V curves, Spectral response

  4. Technology with Supercritical Fluid. Part 2. Applications

    International Nuclear Information System (INIS)

    Marongiu, B.; De Giorgi, M. R.; Porcedda, S.; Cadoni, E.

    1998-01-01

    The present article is based on a bibliographical analysis of the main applications of the supercritical fluid in various fields, as: extraction from solid matrices, division of liquid charges, chromatography HPLC with supercritical eluent, chemical and biochemical reactions in supercritical solvents etc [it

  5. Continuum Thermodynamics - Part II: Applications and Examples

    Science.gov (United States)

    Albers, Bettina; Wilmanski, Krzysztof

    The intention by writing Part II of the book on continuum thermodynamics was the deepening of some issues covered in Part I as well as a development of certain skills in dealing with practical problems of oscopic processes. However, the main motivation for this part is the presentation of main facets of thermodynamics which appear when interdisciplinary problems are considered. There are many monographs on the subjects of solid mechanics and thermomechanics, on fluid mechanics and on coupled fields but most of them cover only special problems in great details which are characteristic for the chosen field. It is rather seldom that relations between these fields are discussed. This concerns, for instance, large deformations of the skeleton of porous materials with diffusion (e.g. lungs), couplings of deformable particles with the fluid motion in suspensions, couplings of adsorption processes and chemical reactions in immiscible mixtures with diffusion, various multi-component aspects of the motion, e.g. of avalanches, such as segregation processes, etc...

  6. 32 CFR Appendix A to Part 552 - DPCA Recreational Areas in Training Areas

    Science.gov (United States)

    2010-07-01

    ... guests. Boat launch adjacent to Officer's Club Beach on American Lake/Beachwood area Cat Lake Picnic and Fishing Area—Training Area 19 Chambers Lake Picnic and *Fishing Area—Training Area 12 (See para 2 below) Ecology Park Hiking Path—North Fort, CTA A West Fiander Lake Picnic and Fishing Area—Training Area 20...

  7. An overview of artificial intelligence and robotics. Volume 1: Artificial intelligence. Part B: Applications

    Science.gov (United States)

    Gevarter, W. B.

    1983-01-01

    Artificial Intelligence (AI) is an emerging technology that has recently attracted considerable attention. Many applications are now under development. This report, Part B of a three part report on AI, presents overviews of the key application areas: Expert Systems, Computer Vision, Natural Language Processing, Speech Interfaces, and Problem Solving and Planning. The basic approaches to such systems, the state-of-the-art, existing systems and future trends and expectations are covered.

  8. Resource Conservation and Recovery Act, Part B Permit Application

    International Nuclear Information System (INIS)

    1992-01-01

    This report, Part B (Vol. 3) of the permit application for the WIPP facility, contains information related to the site characterization of the facility, including geology, design, rock salt evaluations, maps, drawings, and shaft excavations

  9. 17 CFR 289.1 - Applicability of this part.

    Science.gov (United States)

    2010-04-01

    ... CORPORATION ACT § 289.1 Applicability of this part. This part (Regulation IFC) prescribes the reports to be filed with the Securities and Exchange Commission by the International Finance Corporation (“IFC”) pursuant to section 13(a) of the International Finance Corporation Act. ...

  10. Development application guidelines : Newfoundland offshore area

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1988-12-01

    The Canada-Newfoundland Offshore Petroleum Board has created a set of guidelines which describe the information needed by the Board to process a development application by a proponent of an offshore hydrocarbon development project. The guidelines also describe the review process that will be followed in considering a proponent`s application. Proponents must also refer to the Canada-Newfoundland Atlantic Accord Implementation Act and the Canada-Newfoundland Atlantic Accord Implementation (Newfoundland) Act. These guidelines also describe the requirements for the Canada-Newfoundland benefits plan, the environmental impact statement, the socio-economic impact statement, the safety plan, and the environmental protection plan.

  11. Topology Optimization - broadening the areas of application

    DEFF Research Database (Denmark)

    Bendsøe, Martin P.; Lund, Erik; Olhoff, Niels

    2005-01-01

    This paper deals with recent developments of topology optimization techniques for application in some new types of design problems. The emphasis is on recent work of the Danish research groups at Aalborg University and at the Technical University of Denmark and focus is on the central role that t...

  12. Design for behaviour change : Introducing five areas of application and related case studies

    NARCIS (Netherlands)

    Niedderer, Kristina; Clune, Stephen; Ludden, Geke; Niedderer, Kristina; Clune, Stephen; Ludden, Geke

    2017-01-01

    Part 3 of this book explores the real-world application of design for behavioural change principles and tools within five thematic areas. These five areas are as follows: • Sustainability • Health and wellbeing • Safety • Design against crime • Social design.

  13. Recent applications of nuclear medicine in diagnostics: II part

    Directory of Open Access Journals (Sweden)

    Giorgio Treglia

    2013-04-01

    Full Text Available Introduction: Positron-emission tomography (PET and single photon emission computed tomography (SPECT are effective diagnostic imaging tools in several clinical settings. The aim of this article (the second of a 2-part series is to examine some of the more recent applications of nuclear medicine imaging techniques, particularly in the fields of neurology, cardiology, and infection/inflammation. Discussion: A review of the literature reveals that in the field of neurology nuclear medicine techniques are most widely used to investigate cognitive deficits and dementia (particularly those associated with Alzheimer disease, epilepsy, and movement disorders. In cardiology, SPECT and PET also play important roles in the work-up of patients with coronary artery disease, providing accurate information on the state of the myocardium (perfusion, metabolism, and innervation. White blood cell scintigraphy and FDG-PET are widely used to investigate many infectious/inflammatory processes. In each of these areas, the review discusses the use of recently developed radiopharmaceuticals, the growth of tomographic nuclear medicine techniques, and the ways in which these advances are improving molecular imaging of biologic processes at the cellular level.

  14. 50 CFR Figure 8 to Part 679 - Aleutian Islands Chinook Salmon Savings Area

    Science.gov (United States)

    2010-10-01

    ... 50 Wildlife and Fisheries 9 2010-10-01 2010-10-01 false Aleutian Islands Chinook Salmon Savings Area 8 Figure 8 to Part 679 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT, NATIONAL... ECONOMIC ZONE OFF ALASKA Pt. 679, Fig. 8 Figure 8 to Part 679—Aleutian Islands Chinook Salmon Savings Area...

  15. Intelligent computing systems emerging application areas

    CERN Document Server

    Virvou, Maria; Jain, Lakhmi

    2016-01-01

    This book at hand explores emerging scientific and technological areas in which Intelligent Computing Systems provide efficient solutions and, thus, may play a role in the years to come. It demonstrates how Intelligent Computing Systems make use of computational methodologies that mimic nature-inspired processes to address real world problems of high complexity for which exact mathematical solutions, based on physical and statistical modelling, are intractable. Common intelligent computational methodologies are presented including artificial neural networks, evolutionary computation, genetic algorithms, artificial immune systems, fuzzy logic, swarm intelligence, artificial life, virtual worlds and hybrid methodologies based on combinations of the previous. The book will be useful to researchers, practitioners and graduate students dealing with mathematically-intractable problems. It is intended for both the expert/researcher in the field of Intelligent Computing Systems, as well as for the general reader in t...

  16. Resource Conservation and Recovery Act, Part B, Permit Application

    International Nuclear Information System (INIS)

    1991-01-01

    This report is part of the permit application for the WIPP facility. Appendices are presented on the following: the design validation final report; sampling of volatile organic compounds which may be emitted from waste binss, site supplementary roof support system, and studies on wind and tornado probabilities

  17. 19 CFR 210.1 - Applicability of part.

    Science.gov (United States)

    2010-04-01

    ... 19 Customs Duties 3 2010-04-01 2010-04-01 false Applicability of part. 210.1 Section 210.1 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION INVESTIGATIONS OF UNFAIR PRACTICES IN IMPORT TRADE..., and 1337) and sections 2 and 1342(d)(1)(B) of the Omnibus Trade and Competitiveness Act of 1988, Pub...

  18. 19 CFR 213.1 - Purpose and applicability of part.

    Science.gov (United States)

    2010-04-01

    ... 213.1 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION INVESTIGATIONS OF UNFAIR PRACTICES IN IMPORT TRADE TRADE REMEDY ASSISTANCE § 213.1 Purpose and applicability of part. (a) Section 339 of... benefits available under the trade laws identified in § 213.2(b) and the procedures to be followed and...

  19. 39 CFR 3050.1 - Definitions applicable to this part.

    Science.gov (United States)

    2010-07-01

    ... in a subsequent rule 3050.11 proceeding. (c) Analytical principle refers to a particular economic... Definitions applicable to this part. (a) Accepted analytical principle refers to an analytical principle that... analytical principle subsequently was accepted by the Commission in a final rule. (b) Accepted quantification...

  20. Large-area OLED lightings and their applications

    International Nuclear Information System (INIS)

    Park, J W; Shin, D C; Park, S H

    2011-01-01

    In this paper, we review the key issues related to the fabrication of large-area organic light-emitting devices (OLEDs) for lighting applications. We discuss the origin of a short-circuit problem, luminance non-uniformity, hot spot, efficiency reduction (power loss), and heat generation and present the way of suppressing them. We also introduce three different application areas of large-area OLED lighting panels. They can be integrated with a solar cell for power recycling or inorganic LEDs for emotional lightings. The feasibility of using OLEDs for the application of visible-light communications is also reviewed

  1. 50 CFR Table 6 to Part 679 - Steller Sea Lion Protection Areas Atka Mackerel Fisheries Restrictions

    Science.gov (United States)

    2010-10-01

    ... 50 Wildlife and Fisheries 9 2010-10-01 2010-10-01 false Steller Sea Lion Protection Areas Atka Mackerel Fisheries Restrictions 6 Table 6 to Part 679 Wildlife and Fisheries FISHERY CONSERVATION AND... THE EXCLUSIVE ECONOMIC ZONE OFF ALASKA Pt. 679, Table 6 Table 6 to Part 679—Steller Sea Lion...

  2. 50 CFR Table 5 to Part 679 - Steller Sea Lion Protection Areas Pacific Cod Fisheries Restrictions

    Science.gov (United States)

    2010-10-01

    ... 50 Wildlife and Fisheries 9 2010-10-01 2010-10-01 false Steller Sea Lion Protection Areas Pacific Cod Fisheries Restrictions 5 Table 5 to Part 679 Wildlife and Fisheries FISHERY CONSERVATION AND... THE EXCLUSIVE ECONOMIC ZONE OFF ALASKA Pt. 679, Table 5 Table 5 to Part 679—Steller Sea Lion...

  3. Application of charged particle activation for testing machine part wear

    International Nuclear Information System (INIS)

    Kosimova, M.; Tendera, P.

    1985-01-01

    The results of application of the charge particle activation method to investigate machine part wear are presented. Study of radionuclide activity and yield has been carried out at the U-120M isochronous cyclotron by means of the method of iron foil piles from 20 to 100 μm in thick. Protons and deuterons have been used. Wear measurement is based on determination of wear particle activity in a butyric medium. An example of the results of a bench test of activated piston rings and cylinder liner of the engine for trucks is given. The method of surface activation is shown to be acceptable for studying machine part wear under the regular service conditions, especially on the stage of the primary investigations and development, when sampling structural materials and estimating different lubricating oil applicability

  4. Design of belt conveyors in bulk terminal applications. Part 1

    Energy Technology Data Exchange (ETDEWEB)

    Goodwin, P J; Ramos, C M

    1985-10-01

    This paper discusses belt conveyors and their development in bulk terminal applications in South Africa. Single- and multi-product terminal philosophy is discussed, including methods of handling different products over the same system and limiting the effects of degradation at transfer points. In Part II, some aspects of belt conveyor design, as well as the results of tests on a chute designed to handle a range of products, will be covered. 23 references.

  5. Selecting Map Projections in Minimizing Area Distortions in GIS Applications

    Directory of Open Access Journals (Sweden)

    Ahmet Kaya

    2008-12-01

    Full Text Available Varioussoftware for Geographical Information Systems (GISs have been developed and used in many different engineering projects. In GIS applications, map coverage is important in terms of performing reliable and meaningful queries. Map projections can be conformal, equal-area and equidistant. The goal of an application plays an important role in choosing one of those projections. Choosing the equal-area projection for an application in which area information is used (forestry, agriculture, ecosystem etc reduces the amount of distortion on the area, but many users using GIS ignore this fact and continue to use applications with present map sheets no matter in what map projection it is. For example, extracting area information from data whose country system’s map sheet is in conformal projection is relatively more distorted, compared to an equal-area projection one. The goal of this study is to make the best decision in choosing the most proper equal-area projection among the choices provided by ArcGIS 9.0, which is a popular GIS software package, and making a comparison on area errors when conformal projection is used. In this study, the area of parcels chosen in three different regions and geographic coordinates and whose sizes vary between 0.01 to 1,000,000 ha are calculated according to Transversal Mercator (TM, 3°, Universal Transversal Mercator (UTM, 6° and 14 different equal-area projections existing in the ArcGIS 9.0 GIS software package. The parcel areas calculated with geographical coordinates are accepted as definite. The difference between the sizes calculated according to projection coordinates and real sizes of the parcels are determined. Consequently, the appropriate projections are decided for the areas smaller and equal than 1,000 ha and greater than 1,000 ha in the GIS software package.

  6. ANALYSIS OF WEB MINING APPLICATIONS AND BENEFICIAL AREAS

    Directory of Open Access Journals (Sweden)

    Khaleel Ahmad

    2011-10-01

    Full Text Available The main purpose of this paper is to study the process of Web mining techniques, features, application ( e-commerce and e-business and its beneficial areas. Web mining has become more popular and its widely used in varies application areas (such as business intelligent system, e-commerce and e-business. The e-commerce or e-business results are bettered by the application of the mining techniques such as data mining and text mining, among all the mining techniques web mining is better.

  7. Graphical symbols -- Safety colours and safety signs -- Part 1: Design principles for safety signs in workplaces and public areas

    CERN Document Server

    International Organization for Standardization. Geneva

    2002-01-01

    This International Standard establishes the safety identification colours and design principles for safety signs to be used in workplaces and in public areas for the purpose of accident prevention, fire protection, health hazard information and emergency evacuation. It also establishes the basic principles to be applied when developing standards containing safety signs. This part of ISO 3864 is applicable to workplaces and all locations and all sectors where safety-related questions may be posed. However, it is not applicable to the signalling used for guiding rail, road, river, maritime and air traffic and, generally speaking, to those sectors subject to a regulation which may differ.

  8. 300 Area TEDF DOE order compliance applicability assessment

    Energy Technology Data Exchange (ETDEWEB)

    Eacker, J.A.

    1994-11-08

    This report summarizes the results of an effort to determine applicability of Department of Energy Orders at the Hanford 300 Area Treated Effluent Disposal Facility (TEDF). This assessment placed each of the reviewed orders into one of three compliance categories: (A) order applicable at a facility specific level (20 identified); (B) order applicable at a policy level (11 identified); or (C) order not applicable (21 identified). The scope of the assessment from the DOE Order standpoint was the 52 Level 1 Orders of interest to the Defense Nuclear Facility Safety Board (DNFSB). Although the TEDF is a non-nuclear facility, this order basis was chosen as a Best Management Practice to be consistent with ongoing efforts across the Hanford Site. Three tables in the report summarize the DOE order applicability by the compliance categories, with a table for Level A, Level B, and Level C applicability. The attachment to the report documents the compliance applicability assessment for each individual DOE Order.

  9. 300 Area TEDF DOE order compliance applicability assessment

    International Nuclear Information System (INIS)

    Eacker, J.A.

    1994-01-01

    This report summarizes the results of an effort to determine applicability of Department of Energy Orders at the Hanford 300 Area Treated Effluent Disposal Facility (TEDF). This assessment placed each of the reviewed orders into one of three compliance categories: (A) order applicable at a facility specific level (20 identified); (B) order applicable at a policy level (11 identified); or (C) order not applicable (21 identified). The scope of the assessment from the DOE Order standpoint was the 52 Level 1 Orders of interest to the Defense Nuclear Facility Safety Board (DNFSB). Although the TEDF is a non-nuclear facility, this order basis was chosen as a Best Management Practice to be consistent with ongoing efforts across the Hanford Site. Three tables in the report summarize the DOE order applicability by the compliance categories, with a table for Level A, Level B, and Level C applicability. The attachment to the report documents the compliance applicability assessment for each individual DOE Order

  10. The assessment of EUMETSAT HSAF Snow Products for mountainuos areas in the eastern part of Turkey

    Science.gov (United States)

    Akyurek, Z.; Surer, S.; Beser, O.; Bolat, K.; Erturk, A. G.

    2012-04-01

    Monitoring the snow parameters (e.g. snow cover area, snow water equivalent) is a challenging work. Because of its natural physical properties, snow highly affects the evolution of weather from daily basis to climate on a longer time scale. The derivation of snow products over mountainous regions has been considered very challenging. This can be done by periodic and precise mapping of the snow cover. However inaccessibility and scarcity of the ground observations limit the snow cover mapping in the mountainous areas. Today, it is carried out operationally by means of optical satellite imagery and microwave radiometry. In retrieving the snow cover area from satellite images bring the problem of topographical variations within the footprint of satellite sensors and spatial and temporal variation of snow characteristics in the mountainous areas. Most of the global and regional operational snow products use generic algorithms for flat and mountainous areas. However the non-uniformity of the snow characteristics can only be modeled with different algorithms for mountain and flat areas. In this study the early findings of Satellite Application Facilities on Hydrology (H-SAF) project, which is financially supported by EUMETSAT, will be presented. Turkey is a part of the H-SAF project, both in product generation (eg. snow recognition, fractional snow cover and snow water equivalent) for mountainous regions for whole Europe, cal/val of satellite-derived snow products with ground observations and cal/val studies with hydrological modeling in the mountainous terrain of Europe. All the snow products are operational on a daily basis. For the snow recognition product (H10) for mountainous areas, spectral thresholding methods were applied on sub pixel scale of MSG-SEVIRI images. The different spectral characteristics of cloud, snow and land determined the structure of the algorithm and these characteristics were obtained from subjective classification of known snow cover features

  11. Operation of industrial electrical substations. Part II: practical applications

    Energy Technology Data Exchange (ETDEWEB)

    Sanchez Jimenez, Juan J; Zerquera Izquierdo, Mariano D; Beltran Leon, Jose S; Garcia Martinez, Juan M; Alvarez Urena, Maria V; Meza Diaz, Guillermo [Universidad de Guadalajara (Mexico)]. E-mails: cheosj@yahoo.com; mdzi@hotmail.com; beltran5601@yahoo.com.mx; jmargarmtz@yahoo.com; victory_alvarez@telmexmail.com; depmec@cucei.udg.mx

    2013-03-15

    The practical application of the methodology explained in Part 1 in a Cuban industry is the principal objective of this paper. The calculus of the economical operation of the principal transformers of the industrial plant is shown of the one very easy form, as well as the determination of the equations of the losses when the transformers operate under a given load diagram. It is calculated the state load which will be passed to the operation in parallel. [Spanish] El objetivo principal de este trabajo es la aplicacion practica de la metodologia, en una industria cubana, que se explico en la Parte 1. El calculo de la operacion economica de los principales transformadores de la planta industrial se muestra de una forma muy facil, asi como la determinacion de las ecuaciones de las perdidas cuando los transformadores operan bajo un diagrama de carga dado. Se calcula la carga de estado que se pasa a la operacion en paralelo.

  12. Fuzzy Sets Applications in Civil Engineering Basic Areas

    Directory of Open Access Journals (Sweden)

    Latif Onur UĞUR

    2016-01-01

    Full Text Available Civil engineering is a professional engineering discipline that deals with the design, construction, and maintenance of the physical and naturally built environment, including works like roads, bridges, canals, dams, and buildings. This paper presents some Fuzzy Logic (FL applications in civil engeering discipline and shows the potential of facilities of FL in this area. The potential role of fuzzy sets in analysing system and human uncertainty is investigated in the paper. The main finding of this inquiry is FL applications used in different areas of civil engeering discipline with success. Once developed, the fuzzy logic models can be used for further monitoring activities, as a management tool.

  13. Wireless body area networks technology, implementation, and applications

    CERN Document Server

    Yuce, Mehmet R

    2011-01-01

    The book provides a comprehensive overview for the latest WBAN systems, technologies, and applications. The chapters of the book have been written by various specialists who are experts in their areas of research and practice. The book starts with the basic techniques involved in designing and building WBAN systems. It explains the deployment issues and then moves into the application areas of WBAN. The remaining chapters focus on the development of hardware, signal processing algorithms, and wireless communication and network design for wearable and implantable body sensors used in WBAN appli

  14. Leaf-IT: An Android application for measuring leaf area.

    Science.gov (United States)

    Schrader, Julian; Pillar, Giso; Kreft, Holger

    2017-11-01

    The use of plant functional traits has become increasingly popular in ecological studies because plant functional traits help to understand key ecological processes in plant species and communities. This also includes changes in diversity, inter- and intraspecific interactions, and relationships of species at different spatiotemporal scales. Leaf traits are among the most important traits as they describe key dimensions of a plant's life history strategy. Further, leaf area is a key parameter with relevance for other traits such as specific leaf area, which in turn correlates with leaf chemical composition, photosynthetic rate, leaf longevity, and carbon investment. Measuring leaf area usually involves the use of scanners and commercial software and can be difficult under field conditions. We present Leaf-IT, a new smartphone application for measuring leaf area and other trait-related areas. Leaf-IT is free, designed for scientific purposes, and runs on Android 4 or higher. We tested the precision and accuracy using objects with standardized area and compared the area measurements of real leaves with the well-established, commercial software WinFOLIA using the Altman-Bland method. Area measurements of standardized objects show that Leaf-IT measures area with high accuracy and precision. Area measurements with Leaf-IT of real leaves are comparable to those of WinFOLIA. Leaf-IT is an easy-to-use application running on a wide range of smartphones. That increases the portability and use of Leaf-IT and makes it possible to measure leaf area under field conditions typical for remote locations. Its high accuracy and precision are similar to WinFOLIA. Currently, its main limitation is margin detection of damaged leaves or complex leaf morphologies.

  15. 42 CFR Appendix G to Part 5 - Criteria for Designation of Areas Having Shortages of Veterinary Professional(s)

    Science.gov (United States)

    2010-10-01

    ... of Veterinary Professional(s) G Appendix G to Part 5 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT... Pt. 5, App. G Appendix G to Part 5—Criteria for Designation of Areas Having Shortages of Veterinary Professional(s) Part I—Geographic Areas A. Criteria for Food Animal Veterinary Shortage. A geographic area will...

  16. WIPP Compliance Certification Application calculations parameters. Part 1: Parameter development

    International Nuclear Information System (INIS)

    Howarth, S.M.

    1997-01-01

    The Waste Isolation Pilot Plant (WIPP) in southeast New Mexico has been studied as a transuranic waste repository for the past 23 years. During this time, an extensive site characterization, design, construction, and experimental program was completed, which provided in-depth understanding of the dominant processes that are most likely to influence the containment of radionuclides for 10,000 years. Nearly 1,500 parameters were developed using information gathered from this program; the parameters were input to numerical models for WIPP Compliance Certification Application (CCA) Performance Assessment (PA) calculations. The CCA probabilistic codes frequently require input values that define a statistical distribution for each parameter. Developing parameter distributions begins with the assignment of an appropriate distribution type, which is dependent on the type, magnitude, and volume of data or information available. The development of the parameter distribution values may require interpretation or statistical analysis of raw data, combining raw data with literature values, scaling of lab or field data to fit code grid mesh sizes, or other transformation. Parameter development and documentation of the development process were very complicated, especially for those parameters based on empirical data; they required the integration of information from Sandia National Laboratories (SNL) code sponsors, parameter task leaders (PTLs), performance assessment analysts (PAAs), and experimental principal investigators (PIs). This paper, Part 1 of two parts, contains a discussion of the parameter development process, roles and responsibilities, and lessons learned. Part 2 will discuss parameter documentation, traceability and retrievability, and lessons learned from related audits and reviews

  17. Setting Up CD-ROM Work Areas. Part I: Ergonomic Considerations, User Furniture, Location.

    Science.gov (United States)

    Vasi, John; LaGuardia, Cheryl

    1992-01-01

    The first of a two-part series on design of CD-ROM work areas in libraries discusses (1) space and location considerations; (2) ergonomics, including work surface, chairs, lighting, printers, other accessories, and security; and (3) other considerations, including staff assistance, reference tools, literature racks, and promotional materials. (MES)

  18. Synchrotron radiation and x-ray topography. Part II. Examples of some applications

    International Nuclear Information System (INIS)

    Bilello, J.C.

    1985-01-01

    Synchrotron x-radiation topography is a powerful tool for studying defects in ''bulk'' metals and alloys. The general features of this technique, including both advantages and disadvantages, have been discussed in Part I of this review. This second report concentrates on some applications of the white beam topography method to studies of flow and fracture of materials and indicates fruitful areas for possible future application. Research investigations on cleavage surfaces of some bcc and hcp metals and alloys are reviewed and contrasted to other more usual methods of studying the morphology of the resulting microstructures

  19. Generating Vegetation Leaf Area Index Earth System Data Record from Multiple Sensors. Part 1; Theory

    Science.gov (United States)

    Ganguly, Sangram; Schull, Mitchell A.; Samanta, Arindam; Shabanov, Nikolay V.; Milesi, Cristina; Nemani, Ramakrishna R.; Knyazikhin, Yuri; Myneni, Ranga B.

    2008-01-01

    The generation of multi-decade long Earth System Data Records (ESDRs) of Leaf Area Index (LAI) and Fraction of Photosynthetically Active Radiation absorbed by vegetation (FPAR) from remote sensing measurements of multiple sensors is key to monitoring long-term changes in vegetation due to natural and anthropogenic influences. Challenges in developing such ESDRs include problems in remote sensing science (modeling of variability in global vegetation, scaling, atmospheric correction) and sensor hardware (differences in spatial resolution, spectral bands, calibration, and information content). In this paper, we develop a physically based approach for deriving LAI and FPAR products from the Advanced Very High Resolution Radiometer (AVHRR) data that are of comparable quality to the Moderate resolution Imaging Spectroradiometer (MODIS) LAI and FPAR products, thus realizing the objective of producing a long (multi-decadal) time series of these products. The approach is based on the radiative transfer theory of canopy spectral invariants which facilitates parameterization of the canopy spectral bidirectional reflectance factor (BRF). The methodology permits decoupling of the structural and radiometric components and obeys the energy conservation law. The approach is applicable to any optical sensor, however, it requires selection of sensor-specific values of configurable parameters, namely, the single scattering albedo and data uncertainty. According to the theory of spectral invariants, the single scattering albedo is a function of the spatial scale, and thus, accounts for the variation in BRF with sensor spatial resolution. Likewise, the single scattering albedo accounts for the variation in spectral BRF with sensor bandwidths. The second adjustable parameter is data uncertainty, which accounts for varying information content of the remote sensing measurements, i.e., Normalized Difference Vegetation Index (NDVI, low information content), vs. spectral BRF (higher

  20. Resource Conservation and Recovery Act Part B permit application

    International Nuclear Information System (INIS)

    1991-02-01

    The Waste Isolation Pilot Plant (WIPP) project was authorized by the Department of Energy National Security and Military Applications of Nuclear Energy Authorization Act of 1980 (Public Law 96-164) as a research and development facility to demonstrate the safe, environmentally sound disposal of transuranic (TRU) radioactive wastes derived from the defense activities of the United States. The WIPP facility is owned and operated by the US Department of Energy (DOE). The TRU waste to be received at WIPP consists largely of such items as laboratory glassware and utensils, tools, scrap metal, shielding, personnel protection equipment, and solidified sludges from the treatment of waste water. Approximately 60 percent of this waste is ''mixed,'' that is, it is also contaminated with hazardous waste or hazardous waste constituents as defined by the Resource Conservation and Recovery Act (RCRA) and by the New Mexico Hazardous Waste Management Regulations (HWMR-5). Therefore, emplacement of TRU mixed waste in the WIPP repository is subject to regulation under HWMR-5 and RCRA. The permit application under the Resource Conservation and Recovery Act for WIPP is divided into five volumes. This document, Volume 1, contains a site and facility description of WIPP; procedures for waste analysis and characterization, testing, monitoring, inspection, and training; hazard prevention, safety and security plans; plans for closure; and a discussion of other applicable laws. Also included are maps, photographs, and diagrams of the facilities and surrounding areas. 180 refs., 75 figs., 24 tabs

  1. Application of local area network technology in an engineering environment

    International Nuclear Information System (INIS)

    Powell, A.D.; Sokolowski, M.A.

    1990-01-01

    This paper reports on the application of local area network technology in an engineering environment. Mobil Research and Development Corporation Engineering, Dallas, texas has installed a local area network (LAN) linking over 85 microcomputers. This network, which has been in existence for more than three years, provides common access by all engineers to quality output devices such as laser printers and multi-color pen plotters; IBM mainframe connections; electronic mail and file transfer; and common engineering program. The network has been expanded via a wide area ethernet network to link the Dallas location with a functionally equivalent LAN of over 400 microcomputers in Princeton, N.J. Additionally, engineers on assignment at remote areas in Europe, U.S., Africa and project task forces have dial-in access to the network via telephone lines

  2. The decontamination of a pressurised suit area at AEE Winfrith. Part 1

    International Nuclear Information System (INIS)

    Bond, R.D.; Rankin, J.D.; Robinson, D.H.; Sanders, M.J.

    1984-04-01

    Dry suction cleaning and chemical foam treatment were used on a plutonium oxide decontaminated area. Details of the equipment and reagents are given together with the results. Average levels of contamination by one application were reduced by over 80 percent, and airborne levels by more than 99 percent. (U.K.)

  3. Hanford Facility Dangerous Waste Permit Application, 200 Area Effluent Treatment Facility

    International Nuclear Information System (INIS)

    1993-08-01

    The 200 Area Effluent Treatment Facility Dangerous Waste Permit Application documentation consists of both Part A and a Part B permit application documentation. An explanation of the Part A revisions associated with this treatment and storage unit, including the current revision, is provided at the beginning of the Part A section. Once the initial Hanford Facility Dangerous Waste Permit is issued, the following process will be used. As final, certified treatment, storage, and/or disposal unit-specific documents are developed, and completeness notifications are made by the US Environmental Protection Agency and the Washington State Department of Ecology, additional unit-specific permit conditions will be incorporated into the Hanford Facility Dangerous Waste Permit through the permit modification process. All treatment, storage, and/or disposal units that are included in the Hanford Facility Dangerous Waste Permit Application will operate under interim status until final status conditions for these units are incorporated into the Hanford Facility Dangerous Waste Permit. The Hanford Facility Dangerous Waste Permit Application, 200 Area Effluent Treatment Facility contains information current as of May 1, 1993

  4. Hanford Facility Dangerous Waste Permit Application, 200 Area Effluent Treatment Facility

    Energy Technology Data Exchange (ETDEWEB)

    1993-08-01

    The 200 Area Effluent Treatment Facility Dangerous Waste Permit Application documentation consists of both Part A and a Part B permit application documentation. An explanation of the Part A revisions associated with this treatment and storage unit, including the current revision, is provided at the beginning of the Part A section. Once the initial Hanford Facility Dangerous Waste Permit is issued, the following process will be used. As final, certified treatment, storage, and/or disposal unit-specific documents are developed, and completeness notifications are made by the US Environmental Protection Agency and the Washington State Department of Ecology, additional unit-specific permit conditions will be incorporated into the Hanford Facility Dangerous Waste Permit through the permit modification process. All treatment, storage, and/or disposal units that are included in the Hanford Facility Dangerous Waste Permit Application will operate under interim status until final status conditions for these units are incorporated into the Hanford Facility Dangerous Waste Permit. The Hanford Facility Dangerous Waste Permit Application, 200 Area Effluent Treatment Facility contains information current as of May 1, 1993.

  5. Part 5: Receiver Operating Characteristic Curve and Area under the Curve

    Directory of Open Access Journals (Sweden)

    Saeed Safari

    2016-04-01

    Full Text Available Multiple diagnostic tools are used by emergency physicians,every day. In addition, new tools are evaluated to obtainmore accurate methods and reduce time or cost of conventionalones. In the previous parts of this educationalseries, we described diagnostic performance characteristicsof diagnostic tests including sensitivity, specificity, positiveand negative predictive values, and likelihood ratios. Thereceiver operating characteristics (ROC curve is a graphicalpresentation of screening characteristics. ROC curve is usedto determine the best cutoff point and compare two or moretests or observers by measuring the area under the curve(AUC. In this part of our educational series, we explain ROCcurve and two methods to determine the best cutoff value.

  6. Resource Conservation and Recovery Act, Part B Permit Application

    International Nuclear Information System (INIS)

    1991-02-01

    The Waste Isolation Pilot Plant (WIPP) project was authorized by the Department of Energy National Security and Military Applications of Nuclear Energy Authorization Act of 1980 (Public Law 96-164) as a research and development facility to demonstrate the safe, environmentally sound disposal of transuranic (TRU) radioactive wastes derived from the defense activities of the United States. The WIPP facility is owned and operated by the US Department of Energy (DOE). The TRU waste to be received at WIPP consists largely of such items as laboratory glassware and utensils, tools, scrap metal, shielding, personnel protection equipment, and solidified sludges from the treatment of waste water. Approximately 60 percent of this waste is ''mixed,'' that is, it is also contaminated with hazardous waste or hazardous waste constituents as defined by the Resource Conservation and Recovery Act (RCRA) and by the New Mexico Hazardous Waste Management Regulations (HWMR-5). Therefore, emplacement of TRU mixed waste in the WIPP repository is subject to regulation under HWMR-5 and RCRA. The permit application under the Resource Conservation and Recovery Act for WIPP is divided into five volumes. This document, Volume 2, contains Appendices B1, C1, and C2. These appendices describe the surface hydrology of the area, provide a description of the physical and chemical characteristics of wastes to be placed in WIPP, and outline a waste analysis plan which gives an overview of the total waste inventory planned for WIPP. 34 refs., 107 figs., 27 tabs

  7. Resource Conservation and Recovery Act, Part B Permit Application

    International Nuclear Information System (INIS)

    1991-02-01

    The Waste Isolation Pilot Plant (WIPP) project was authorized by the Department of Energy National Security and Military Applications of Nuclear Energy Authorization Act of 1980 (Public Law 96-164) as a research and development facility to demonstrate the safe, environmentally sound disposal of transuranic (TRU) radioactive wastes derived from the defense activities of the United States. The WIPP facility is owned and operated by the US Department of Energy (DOE). The TRU waste to be received at WIPP consists largely of such items as laboratory glassware and utensils, tools, scrap metal, shielding, personnel protection equipment, and solidified sludges from the treatment of waste water. Approximately 60 percent of this waste is ''mixed,'' that is, it is also contaminated with hazardous waste or hazardous waste constituents as defined by the Resource Conservation and Recovery Act (RCRA) and by the New Mexico Hazardous Waste Management Regulations (HWMR-5). Therefore, emplacement of TRU mixed waste in the WIPP repository is subject to regulation under HWMR-5 and RCRA. The permit application under the Resource Conservation and Recovery Act for WIPP is divided into five volumes. This document, Volume 4, contains Appendices C3, C4, and D1--D10. These appendices cover information on environmental impacts, site characterization, geology and hydrology of the area, monitoring of the environment, compatibility of waste forms and containers, and removal of volatile organic compounds (VOC)

  8. Solar energy scenarios in Brazil. Part two: Photovoltaics applications

    International Nuclear Information System (INIS)

    Martins, F.R.; Ruether, R.; Pereira, E.B.; Abreu, S.L.

    2008-01-01

    This paper discusses some energy scenarios for photovoltaic applications in Brazil engendered by using SWERA database in order to demonstrate its potential for feasibility analysis and application in the energy planning for electricity generation. It discusses two major different markets: hybrid PV-Diesel installations in mini-grids of the off-grid Brazilian electricity system in the Amazon region, and grid-connected PV in urban areas of the interconnected Brazilian electricity system. The potential for using PV is huge, and can be estimated in tens to hundreds of MWp in the Amazon region alone, even if only a fraction of the existing Diesel-fired plants with a total installed capacity of over 620 MVA would fit to run in an optimum Diesel/PV mix. Most of the major cities in Brazil present greater electricity demand in summertime with the demand peak happening in the daytime period. This energy profile match the actual solar resource assessment provided by SWERA Data Archive, enabling grid-connected PV systems to provide an important contribution to the utility's capacity

  9. Review and update of the applications of organic petrology: Part 2, geological and multidisciplinary applications

    Science.gov (United States)

    Suarez-Ruiz, Isabel; Flores, Deolinda; Mendonça Filho, João Graciano; Hackley, Paul C.

    2012-01-01

    The present paper is focused on organic petrology applied to unconventional and multidisciplinary investigations and is the second part of a two part review that describes the geological applications and uses of this branch of earth sciences. Therefore, this paper reviews the use of organic petrology in investigations of: (i) ore genesis when organic matter occurs associated with mineralization; (ii) the behavior of organic matter in coal fires (self-heating and self-combustion); (iii) environmental and anthropogenic impacts associated with the management and industrial utilization of coal; (iv) archeology and the nature and geographical provenance of objects of organic nature such as jet, amber, other artifacts and coal from archeological sites; and (v) forensic science connected with criminal behavior or disasters. This second part of the review outlines the most recent research and applications of organic petrology in those fields.

  10. Hydrostratigraphy and hydrogeology of the western part of Maira area, Khyber Pakhtunkhwa, Pakistan: A case study by using electrical resistivity

    KAUST Repository

    Farid, Asam M.; Jadoon, Khan; Akhter, Gulraiz; Iqbal, Muhammad Asim

    2012-01-01

    at the western part of the Maira area, Khyber Pakhtun Khwa, Pakistan. Aquifer lithology in the eastern part of the study area is dominated by coarse sand and gravel whereas the western part is characterized by fine sand. An attempt has been made to estimate

  11. 42 CFR Appendix F to Part 5 - Criteria for Designation of Areas Having Shortages of Pharmacy Professional(s)

    Science.gov (United States)

    2010-10-01

    ... of Pharmacy Professional(s) F Appendix F to Part 5 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF..., App. F Appendix F to Part 5—Criteria for Designation of Areas Having Shortages of Pharmacy... of pharmacy professional(s) if the following three criteria are met: 1. The area is a rational area...

  12. 47 CFR 24.2 - Other applicable rule parts.

    Science.gov (United States)

    2010-10-01

    ... procedures concerning the marketing and importation of radio frequency devices, and for obtaining equipment... conditions relating to the marketing of part 15 devices. Unlicensed PCS devices operate under subpart D of... towers. (g) Part 20 of this chapter governs commercial mobile radio services. (h) Part 21. This part...

  13. Report on the environmental isotopic investigations in Kedah and Perlis Area, Malaysia (Part 1)

    International Nuclear Information System (INIS)

    Daud bin Mohamad.

    1982-11-01

    A preliminary study of the isotope hydrology of the Kedah and Perlis area was undertaken under the RCA programme. This project is an attempt at elucidating the mechanism of recharge, origin, area of recharge and dating of groundwater system in the area. The results show that all groundwater samples in the area vary within a narrow range for 18 0 (-7.58 to -5.06%) while 2 H ranges from -50.3 to -35.1%. The mean isotopic composition of precipitation collected at Alor Star meteorological station fall within the range of variation of the Kedah/Perlis groundwaters. In the southern part of the study site, the isotopic results indicate the occurence of two types of water: firstly, the recharge is from the highlands where more negative 18 0 values and low tritium were observed and the second type is of local recharge where high tritium and less negative 18 0 values were observed. On the other hand, in the northern part of the basin the interpretation of stable isotopic results is quite difficult to be made at this stage. There was no correlation at all between tritium and 18 0 whatsoever. Results of the tritium assay show that some of the groundwater samples are pre-nuclear in age as indicated by low tritium content. Consequently, a Carbon-14 investigation was carried out from a few selected sites and their ages were found to be in the range of about 3000 to 5000 years. (author)

  14. Shape Memory Alloys (Part II: Classification, Production and Application

    Directory of Open Access Journals (Sweden)

    I. Ivanic

    2014-09-01

    breakdown at low stress levels. The technologies for production of shape memory alloys are induction melting, vacuum melting, vacuum arc melting, following hot and cold working (forging, rolling, wire drawing. In addition, rapid solidification methods, like melt spinning and continuous casting have been developed. These methods are characterized by high cooling rates. High cooling rates allow very short time for diffusion processes and may lead to extremely fine microstructure, better homogeneity etc. SMAs have found applications in many areas due to their thermomechanical and thermoelectrical properties (biomedical applications, engineering industry, electrical industry. In this paper, a review of shape memory alloys, properties and applications of mentioned materials is presented.

  15. Model-Driven Approach for Body Area Network Application Development.

    Science.gov (United States)

    Venčkauskas, Algimantas; Štuikys, Vytautas; Jusas, Nerijus; Burbaitė, Renata

    2016-05-12

    This paper introduces the sensor-networked IoT model as a prototype to support the design of Body Area Network (BAN) applications for healthcare. Using the model, we analyze the synergistic effect of the functional requirements (data collection from the human body and transferring it to the top level) and non-functional requirements (trade-offs between energy-security-environmental factors, treated as Quality-of-Service (QoS)). We use feature models to represent the requirements at the earliest stage for the analysis and describe a model-driven methodology to design the possible BAN applications. Firstly, we specify the requirements as the problem domain (PD) variability model for the BAN applications. Next, we introduce the generative technology (meta-programming as the solution domain (SD)) and the mapping procedure to map the PD feature-based variability model onto the SD feature model. Finally, we create an executable meta-specification that represents the BAN functionality to describe the variability of the problem domain though transformations. The meta-specification (along with the meta-language processor) is a software generator for multiple BAN-oriented applications. We validate the methodology with experiments and a case study to generate a family of programs for the BAN sensor controllers. This enables to obtain the adequate measure of QoS efficiently through the interactive adjustment of the meta-parameter values and re-generation process for the concrete BAN application.

  16. Model-Driven Approach for Body Area Network Application Development

    Science.gov (United States)

    Venčkauskas, Algimantas; Štuikys, Vytautas; Jusas, Nerijus; Burbaitė, Renata

    2016-01-01

    This paper introduces the sensor-networked IoT model as a prototype to support the design of Body Area Network (BAN) applications for healthcare. Using the model, we analyze the synergistic effect of the functional requirements (data collection from the human body and transferring it to the top level) and non-functional requirements (trade-offs between energy-security-environmental factors, treated as Quality-of-Service (QoS)). We use feature models to represent the requirements at the earliest stage for the analysis and describe a model-driven methodology to design the possible BAN applications. Firstly, we specify the requirements as the problem domain (PD) variability model for the BAN applications. Next, we introduce the generative technology (meta-programming as the solution domain (SD)) and the mapping procedure to map the PD feature-based variability model onto the SD feature model. Finally, we create an executable meta-specification that represents the BAN functionality to describe the variability of the problem domain though transformations. The meta-specification (along with the meta-language processor) is a software generator for multiple BAN-oriented applications. We validate the methodology with experiments and a case study to generate a family of programs for the BAN sensor controllers. This enables to obtain the adequate measure of QoS efficiently through the interactive adjustment of the meta-parameter values and re-generation process for the concrete BAN application. PMID:27187394

  17. Model-Driven Approach for Body Area Network Application Development

    Directory of Open Access Journals (Sweden)

    Algimantas Venčkauskas

    2016-05-01

    Full Text Available This paper introduces the sensor-networked IoT model as a prototype to support the design of Body Area Network (BAN applications for healthcare. Using the model, we analyze the synergistic effect of the functional requirements (data collection from the human body and transferring it to the top level and non-functional requirements (trade-offs between energy-security-environmental factors, treated as Quality-of-Service (QoS. We use feature models to represent the requirements at the earliest stage for the analysis and describe a model-driven methodology to design the possible BAN applications. Firstly, we specify the requirements as the problem domain (PD variability model for the BAN applications. Next, we introduce the generative technology (meta-programming as the solution domain (SD and the mapping procedure to map the PD feature-based variability model onto the SD feature model. Finally, we create an executable meta-specification that represents the BAN functionality to describe the variability of the problem domain though transformations. The meta-specification (along with the meta-language processor is a software generator for multiple BAN-oriented applications. We validate the methodology with experiments and a case study to generate a family of programs for the BAN sensor controllers. This enables to obtain the adequate measure of QoS efficiently through the interactive adjustment of the meta-parameter values and re-generation process for the concrete BAN application.

  18. Some biomedical applications of Balanites aegyptiaca grown naturally in radioactive area, Southeastern Desert, Egypt

    Energy Technology Data Exchange (ETDEWEB)

    Morsy, A.M.A., E-mail: Ghostvolca@hotmail.com [Nuclear Materials Authority, P.O. Box 530, El Maadi, Cairo (Egypt); Ahmad, I.A. [Chemistry Department, Faculty of Science, Cairo University (Egypt); Kamel, A.M. [Labeled Compounds Department, Radioisotopes Production Division, Hot Labs Center, Atomic Energy Authority, Abou-Zaabal 13759 (Egypt)

    2010-06-15

    Balanites aegyptiaca is a naturally grown desert plant at some radioactive places in Wadi El-Gemal area, Southeastern Desert. The aim of the present study was to highlight on the B. aegyptiaca species grown naturally at radioactive places in Wadi El-Gemal area (fruit part) on the ability of using the fruit in some biomedical application (glucose, cholesterol, triglycerides, HDL-cholesterol, LDL-cholesterol and diabetes). The investigated plant was collected from different location at Wadi El-Gemal area. The uranium content was determined previously and different concentrations from the fruit with highest uranium content were used to examine the effect of B. aegyptiaca (fruit part) on the glucose, triglycerides, total cholesterol (HDL and LDL-cholesterol) levels using experimental rats. Different analysis techniques were used in order to determine different parameters. The obtained data suggest the beneficial role of B. aegyptiaca fruit as an anti-diabetic and hypo-lipidimic agent.

  19. Some biomedical applications of Balanites aegyptiaca grown naturally in radioactive area, Southeastern Desert, Egypt

    International Nuclear Information System (INIS)

    Morsy, A.M.A.; Ahmad, I.A.; Kamel, A.M.

    2010-01-01

    Balanites aegyptiaca is a naturally grown desert plant at some radioactive places in Wadi El-Gemal area, Southeastern Desert. The aim of the present study was to highlight on the B. aegyptiaca species grown naturally at radioactive places in Wadi El-Gemal area (fruit part) on the ability of using the fruit in some biomedical application (glucose, cholesterol, triglycerides, HDL-cholesterol, LDL-cholesterol and diabetes). The investigated plant was collected from different location at Wadi El-Gemal area. The uranium content was determined previously and different concentrations from the fruit with highest uranium content were used to examine the effect of B. aegyptiaca (fruit part) on the glucose, triglycerides, total cholesterol (HDL and LDL-cholesterol) levels using experimental rats. Different analysis techniques were used in order to determine different parameters. The obtained data suggest the beneficial role of B. aegyptiaca fruit as an anti-diabetic and hypo-lipidimic agent.

  20. Modeling multibody systems with uncertainties. Part II: Numerical applications

    International Nuclear Information System (INIS)

    Sandu, Corina; Sandu, Adrian; Ahmadian, Mehdi

    2006-01-01

    This study applies generalized polynomial chaos theory to model complex nonlinear multibody dynamic systems operating in the presence of parametric and external uncertainty. Theoretical and computational aspects of this methodology are discussed in the companion paper 'Modeling Multibody Dynamic Systems With Uncertainties. Part I: Theoretical and Computational Aspects .In this paper we illustrate the methodology on selected test cases. The combined effects of parametric and forcing uncertainties are studied for a quarter car model. The uncertainty distributions in the system response in both time and frequency domains are validated against Monte-Carlo simulations. Results indicate that polynomial chaos is more efficient than Monte Carlo and more accurate than statistical linearization. The results of the direct collocation approach are similar to the ones obtained with the Galerkin approach. A stochastic terrain model is constructed using a truncated Karhunen-Loeve expansion. The application of polynomial chaos to differential-algebraic systems is illustrated using the constrained pendulum problem. Limitations of the polynomial chaos approach are studied on two different test problems, one with multiple attractor points, and the second with a chaotic evolution and a nonlinear attractor set. The overall conclusion is that, despite its limitations, generalized polynomial chaos is a powerful approach for the simulation of multibody dynamic systems with uncertainties

  1. Smart limbed vehicles for naval applications. Part I. Performance analysis

    Energy Technology Data Exchange (ETDEWEB)

    Weisberg, A.; Wood, L.

    1976-09-30

    Research work in smart, unmanned limbed vehicles for naval warfare applications performed during the latter part of FY76 and FY76T by the Special Studies Group of the LLL Physics Department for the Office of Naval Research is reported. Smart water-traversing limbed remotely navigated vehicles are interesting because: they are the only viable small vehicle usable in high sea states; they are small and work on the ocean surface, they are much harder to detect than any other conventional craft; they have no human pilot, are capable of high-g evasion, and will continue to operate after direct hits that would have crippled a human crew; they have the prospect of providing surface platforms possessing unprecedented speed and maneuverability; unlike manned information-gathering craft, they impose almost no penalty for missions in excess of 10 hours (no need to rotate shifts of crewmen, no food/lavatory requirements, etc.) and, in their ''loitering mode'', waterbugs could perhaps perform their missions for days to weeks; they are cheap enough to use for one-way missions; they are mass-producible; they are inherently reliable--almost impossible to sink and, in the event of in-use failure, the vehicle will not be destroyed; they maximally exploit continuing technological asymmetries between the U.S. and its potential opponents; and they are economically highly cost-effective for a wide spectrum of Navy missions. (TFD)

  2. Modeling multibody systems with uncertainties. Part II: Numerical applications

    Energy Technology Data Exchange (ETDEWEB)

    Sandu, Corina, E-mail: csandu@vt.edu; Sandu, Adrian; Ahmadian, Mehdi [Virginia Polytechnic Institute and State University, Mechanical Engineering Department (United States)

    2006-04-15

    This study applies generalized polynomial chaos theory to model complex nonlinear multibody dynamic systems operating in the presence of parametric and external uncertainty. Theoretical and computational aspects of this methodology are discussed in the companion paper 'Modeling Multibody Dynamic Systems With Uncertainties. Part I: Theoretical and Computational Aspects .In this paper we illustrate the methodology on selected test cases. The combined effects of parametric and forcing uncertainties are studied for a quarter car model. The uncertainty distributions in the system response in both time and frequency domains are validated against Monte-Carlo simulations. Results indicate that polynomial chaos is more efficient than Monte Carlo and more accurate than statistical linearization. The results of the direct collocation approach are similar to the ones obtained with the Galerkin approach. A stochastic terrain model is constructed using a truncated Karhunen-Loeve expansion. The application of polynomial chaos to differential-algebraic systems is illustrated using the constrained pendulum problem. Limitations of the polynomial chaos approach are studied on two different test problems, one with multiple attractor points, and the second with a chaotic evolution and a nonlinear attractor set. The overall conclusion is that, despite its limitations, generalized polynomial chaos is a powerful approach for the simulation of multibody dynamic systems with uncertainties.

  3. Application issues for large-area electrochromic windows incommercial buildings

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Eleanor S.; DiBartolomeo, D.L.

    2000-05-01

    Projections of performance from small-area devices to large-area windows and enterprise marketing have created high expectations for electrochromic glazings. As a result, this paper seeks to precipitate an objective dialog between material scientists and building-application scientists to determine whether actual large-area electrochromic devices will result in significant performance benefits and what material improvements are needed, if any, to make electrochromics more practical for commercial building applications. Few in-situ tests have been conducted with large-area electrochromic windows applied in buildings. This study presents monitored results from a full-scale field test of large-area electrochromic windows to illustrate how this technology will perform in commercial buildings. The visible transmittance (Tv) of the installed electrochromic ranged from 0.11 to 0.38. The data are limited to the winter period for a south-east-facing window. The effect of actual device performance on lighting energy use, direct sun control, discomfort glare, and interior illumination is discussed. No mechanical system loads were monitored. These data demonstrate the use of electrochromics in a moderate climate and focus on the most restrictive visual task: computer use in offices. Through this small demonstration, we were able to determine that electrochromic windows can indeed provide unmitigated transparent views and a level of dynamic illumination control never before seen in architectural glazing materials. Daily lighting energy use was 6-24 percent less compared to the 11 percent-glazing, with improved interior brightness levels. Daily lighting energy use was 3 percent less to 13 percent more compared to the 38 percent-glazing, with improved window brightness control. The electrochromic window may not be able to fulfill both energy-efficiency and visual comfort objectives when low winter direct sun is present, particularly for computer tasks using cathode-ray tube (CRT

  4. State waste discharge permit application: 200 Area Treated Effluent Disposal Facility (Project W-049H)

    International Nuclear Information System (INIS)

    1994-08-01

    As part of the original Hanford Federal Facility Agreement and Concent Order negotiations, US DOE, US EPA and the Washington State Department of Ecology agreed that liquid effluent discharges to the ground to the Hanford Site are subject to permitting in the State Waste Discharge Permit Program (SWDP). This document constitutes the SWDP Application for the 200 Area TEDF stream which includes the following streams discharged into the area: Plutonium Finishing Plant waste water; 222-S laboratory Complex waste water; T Plant waste water; 284-W Power Plant waste water; PUREX chemical Sewer; B Plant chemical sewer, process condensate, steam condensate; 242-A-81 Water Services waste water

  5. State waste discharge permit application: 200 Area Treated Effluent Disposal Facility (Project W-049H)

    Energy Technology Data Exchange (ETDEWEB)

    1994-08-01

    As part of the original Hanford Federal Facility Agreement and Concent Order negotiations, US DOE, US EPA and the Washington State Department of Ecology agreed that liquid effluent discharges to the ground to the Hanford Site are subject to permitting in the State Waste Discharge Permit Program (SWDP). This document constitutes the SWDP Application for the 200 Area TEDF stream which includes the following streams discharged into the area: Plutonium Finishing Plant waste water; 222-S laboratory Complex waste water; T Plant waste water; 284-W Power Plant waste water; PUREX chemical Sewer; B Plant chemical sewer, process condensate, steam condensate; 242-A-81 Water Services waste water.

  6. Distinct cortical areas for names of numbers and body parts independent of language and input modality.

    Science.gov (United States)

    Le Clec'H, G; Dehaene, S; Cohen, L; Mehler, J; Dupoux, E; Poline, J B; Lehéricy, S; van de Moortele, P F; Le Bihan, D

    2000-10-01

    Some models of word comprehension postulate that the processing of words presented in different modalities and languages ultimately converges toward common cerebral systems associated with semantic-level processing and that the localization of these systems may vary with the category of semantic knowledge being accessed. We used functional magnetic resonance imaging to investigate this hypothesis with two categories of words, numerals, and body parts, for which the existence of distinct category-specific areas is debated in neuropsychology. Across two experiments, one with a blocked design and the other with an event-related design, a reproducible set of left-hemispheric parietal and prefrontal areas showed greater activation during the manipulation of topographical knowledge about body parts and a right-hemispheric parietal network during the manipulation of numerical quantities. These results complement the existing neuropsychological and brain-imaging literature by suggesting that within the extensive network of bilateral parietal regions active during both number and body-part processing, a subset shows category-specific responses independent of the language and modality of presentation. Copyright 2000 Academic Press.

  7. Mineralogical study of uraniferous graphitic ore from Deogpyeong, Mogso and southern part of Daejeon area

    Energy Technology Data Exchange (ETDEWEB)

    Lee, D J; Nam, S K [Korean Inst. of Energy and Resources, Seoul (Republic of Korea)

    1981-11-01

    Uranium minerals of torbernite, metatorbernite, metatyuyamunite and autunite have been identified from the uraniferous ores in graphitic beds of Ogcheon Group in Deogpyeong, Mogso and southern part of Daejeon area. Polarizing and ore microscopic studies, and chemical and X-ray powder diffraction analyses were carried out on the uraniferous graphite and associated materials. Main component minerals of uraniferous samples are graphite and quartz. Minor minerals are calcite, muscovite, sericite, andalusite, barite, kaolinite, hyaline opal, uranium minerals, sulfides such as pyrite, chalcopyrite, zincblende, and pyrrhotite, limonite, zeolite minerals such as laumontite and heulandite. Metatyuyamunite, torbernite, metatorbernite and autunite generally occur together with secondary minerals such as kaolinite, hyaline opal, calcite and limonite. They were found along the minor fissures or on the surface. Secondary uranium minerals described above were formed by supergenetic origin from primary uranium mineral. Uraniferous phosphatic nodule from Deogpyeong area are mainly composed of graphite and fluorapatite. And minor minerals are barite, quartz, muscovite and pyrite. Autoradiograph from uraniferous nodule shows that uranium enrichment in outer part of nodules is much higher than in inner part. This feature coincides with chemical analyses data of this uraniferous nodule.

  8. Fault diagnosis of generation IV nuclear HTGR components – Part II: The area error enthalpy–entropy graph approach

    International Nuclear Information System (INIS)

    Rand, C.P. du; Schoor, G. van

    2012-01-01

    Highlights: ► Different uncorrelated fault signatures are derived for HTGR component faults. ► A multiple classifier ensemble increases confidence in classification accuracy. ► Detailed simulation model of system is not required for fault diagnosis. - Abstract: The second paper in a two part series presents the area error method for generation of representative enthalpy–entropy (h–s) fault signatures to classify malfunctions in generation IV nuclear high temperature gas-cooled reactor (HTGR) components. The second classifier is devised to ultimately address the fault diagnosis (FD) problem via the proposed methods in a multiple classifier (MC) ensemble. FD is realized by way of different input feature sets to the classification algorithm based on the area and trajectory of the residual shift between the fault-free and the actual operating h–s graph models. The application of the proposed technique is specifically demonstrated for 24 single fault transients considered in the main power system (MPS) of the Pebble Bed Modular Reactor (PBMR). The results show that the area error technique produces different fault signatures with low correlation for all the examined component faults. A brief evaluation of the two fault signature generation techniques is presented and the performance of the area error method is documented using the fault classification index (FCI) presented in Part I of the series. The final part of this work reports the application of the proposed approach for classification of an emulated fault transient in data from the prototype Pebble Bed Micro Model (PBMM) plant. Reference data values are calculated for the plant via a thermo-hydraulic simulation model of the MPS. The results show that the correspondence between the fault signatures, generated via experimental plant data and simulated reference values, are generally good. The work presented in the two part series, related to the classification of component faults in the MPS of different

  9. Omega-3 fatty acids in schizophrenia Part II: Clinical applications

    Directory of Open Access Journals (Sweden)

    Róg Joanna

    2016-12-01

    Full Text Available Ω-3 unsaturated fatty acids are compounds belonging to the group of essential fatty acids (EFAs. The history of the discovery of EFAs dates back to the 1930s of the twentieth century, however, growing interest in ω-3 EFAs in the context of mental health has been observed since the year 2000. In view of their multidirectional action, these compounds are a promising form of adjunctive therapy of many illnesses, including psychiatric disorders. The present article aims to review the literature on the clinical applicability of ω-3 EFAs in treating schizophrenia. We present the results of preclinical studies in this area and the mechanisms of ω-3 EFAs action discussed by the authors. The randomized controlled trials (RCTs evaluating the possibility of using ω-3 EFAs in schizophrenia are characterized in detail. The results of the tests are not clear, which may result from the methodological diversity of interventions made. Ω-3 EFAs seem to be a promising form of adjunctive therapy of schizophrenia. Further research is needed, which will allow for defining groups of patients in which intervention will bring the expected results.

  10. Reducing biosolids disposal costs using land application in forested areas

    International Nuclear Information System (INIS)

    Huffines, R.L.

    1995-01-01

    Switching biosolids land application from a reclamation site to a forested site significantly reduced the cost of biosolids disposal at the Savannah River Site. Previous beneficial reuse programs focused on reclamation of existing borrow pits. While extremely beneficial, this program became very costly due to the regulatory requirements for groundwater monitoring, soil monitoring and frequent biosolids analyses. A new program was developed to reuse biosolids in forested areas where the biosolids could be used as a soil conditioner and fertilizer to enhance timber yield. The forested land application site was designed so that groundwater monitoring and soil monitoring could be eliminated while biosolids monitoring and site maintenance were minimized. Monitoring costs alone were reduced by 80%. Capital costs for site preparation were also significantly reduced since there was no longer a need for expensive groundwater monitoring wells

  11. Training in radionuclide methodology and applications in biomedical area

    International Nuclear Information System (INIS)

    Signoretta, C.

    1998-01-01

    Full text: Training in the field of radionuclide methodology and applications in biomedical area is important to assure that radionuclide should duly be used without risk for patients or for technicians manipulating them. The National Atomic Energy Commission (CNEA) from its creation is giving training courses of different technical levels to those working in science and technology. The Course on Radionuclide Methodology and application is the most continuous, varied and requested within CNEA. This is a basic course mainly given to Biochemistry and Medicine. Its goal is to give both theoretical and practical knowledge for use and application of radionuclides bearing in mind radiological safety regulations. Personnel from CNEA and Nuclear Regulatory Authority (ARN) carry out teaching. On the other hand, a course for Technicians in Nuclear Medicine is giving supplying knowledge in this field, as well as expertise and practice to attend a responsible Medical Doctor. These curses comprise radionuclide methodology, anatomy, physiology, instrumentation and practical applications in Nuclear Medicine. Statistics concerning these course are giving. (author) [es

  12. Introduction to Part III: Application of LCA in Practice

    DEFF Research Database (Denmark)

    Rosenbaum, Ralph K.

    2018-01-01

    While Part II of this book presents the theoretical foundation and methodology of LCA, Part III is dedicated to a comprehensive discussion of how this methodology has been adapted and applied in practice. The chapters of Part III provide an easily readable and accessible introduction to different...

  13. mHealth Application Areas and Technology Combinations.

    Science.gov (United States)

    Abaza, Haitham; Marschollek, Michael

    2017-01-01

    With the continuous and enormous spread of mobile technologies, mHealth has evolved as a new subfield of eHealth. While eHealth is broadly focused on information and communication technologies, mHealth seeks to explore more into mobile devices and wireless communication. Since mobile phone penetration has exceeded other infrastructure in low and middle-income countries (LMICs), mHealth is seen as a promising component to provide pervasive and patient-centered care. The aim of our research work for this paper is to examine the mHealth literature to identify application areas, target diseases, and mHealth service and technology types that are most appropriate for LMICs. Based on the 2011 WHO mHealth report, a combination of search terms, all including the word "mHealth", was identified. A literature review was conducted by searching the PubMed and IEEE Xplore databases. Articles were included if they were published in English, covered an mHealth solution/intervention, involved the use of a mobile communication device, and included a pilot evaluation study. Articles were excluded if they did not provide sufficient detail on the solution covered or did not focus on clinical efficacy/effectiveness. Cross-referencing was also performed on included articles. 842 articles were retrieved and analyzed, 255 of which met the inclusion criteria. North America had the highest number of applications (n=74) followed by Europe (n=50), Asia (n=44), Africa (n=25), and Australia (n=9). The Middle East (n=5) and South America (n=3) had the least number of studies. The majority of solutions addressed diabetes (n=51), obesity (n=25), CVDs (n=24), HIV (n=18), mental health (n=16), health behaviors (n=16), and maternal and child's health (MCH) (n=11). Fewer solutions addressed asthma (n=7), cancer (n=5), family health planning (n=5), TB (n=3), malaria (n=2), chronic obtrusive pulmonary disease (COPD) (n=2), vision care (n=2), and dermatology (n=2). Other solutions targeted stroke, dental

  14. Resource Conservation and Recovery Act: Part B, Permit application

    International Nuclear Information System (INIS)

    1992-03-01

    This report contains information related to the permit application for the WIPP facility. Information is presented on solid waste management; personnel safety; emergency plans; site characterization; applicable regulations; decommissioning; and ground water monitoring requirements

  15. Third Conference on Artificial Intelligence for Space Applications, part 2

    Science.gov (United States)

    Denton, Judith S. (Compiler); Freeman, Michael S. (Compiler); Vereen, Mary (Compiler)

    1988-01-01

    Topics relative to the application of artificial intelligence to space operations are discussed. New technologies for space station automation, design data capture, computer vision, neural nets, automatic programming, and real time applications are discussed.

  16. Fundamentals and applications of neutron imaging. Application part 9. Application of neutron imaging to biological research

    International Nuclear Information System (INIS)

    Kawabata, Yuji

    2007-01-01

    For radiography, the use of neutrons as a complement to X-rays is especially suitable for biological research such as plant, wood, and medical application due to the enhanced sensitivity to light elements such as hydrogen, carbon, and nitrogen. The present paper introduces applications of neutron CT to the humidity (water) distribution and its variation in the flowering plant as cut carnation, observation of water movement in refrigerated chrysanthemum leaves using very cold neutron and in cut leaves using deuterium oxide and ordinary water, measurement of water movement in sprouting cone and soy bean and growing ginseng in the soil, and other applications as to archaeological wood immersed in a restoration solution and to medical purposes. (S. Ohno)

  17. Application of Flood Nomograph for Flood Forecasting in Urban Areas

    Directory of Open Access Journals (Sweden)

    Eui Hoon Lee

    2018-01-01

    Full Text Available Imperviousness has increased due to urbanization, as has the frequency of extreme rainfall events by climate change. Various countermeasures, such as structural and nonstructural measures, are required to prepare for these effects. Flood forecasting is a representative nonstructural measure. Flood forecasting techniques have been developed for the prevention of repetitive flood damage in urban areas. It is difficult to apply some flood forecasting techniques using training processes because training needs to be applied at every usage. The other flood forecasting techniques that use rainfall data predicted by radar are not appropriate for small areas, such as single drainage basins. In this study, a new flood forecasting technique is suggested to reduce flood damage in urban areas. The flood nomograph consists of the first flooding nodes in rainfall runoff simulations with synthetic rainfall data at each duration. When selecting the first flooding node, the initial amount of synthetic rainfall is 1 mm, which increases in 1 mm increments until flooding occurs. The advantage of this flood forecasting technique is its simple application using real-time rainfall data. This technique can be used to prepare a preemptive response in the process of urban flood management.

  18. 50 CFR Figure 20 to Part 679 - Steller sea lion conservation area (SCA) of the Bering Sea

    Science.gov (United States)

    2010-10-01

    ... 50 Wildlife and Fisheries 9 2010-10-01 2010-10-01 false Steller sea lion conservation area (SCA) of the Bering Sea 20 Figure 20 to Part 679 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT... EXCLUSIVE ECONOMIC ZONE OFF ALASKA Pt. 679, Fig. 20 Figure 20 to Part 679—Steller sea lion conservation area...

  19. Magnetotelluric investigation of the Toender area, Denmark. ALTKUL project report part 2

    Energy Technology Data Exchange (ETDEWEB)

    Rasmussen, T.M.; Thorning, L. [GEUS, Copenhagen (Denmark); Pedersen, L.B.; Shan, C. [Uppsala Univ., Dept. of Earth Sciences, Uppsala (Sweden)

    2012-10-15

    Project ALTKUL was commissioned by DONG E and P A/S and Nordsoefonden; the Danish Energy Agency followed the project closely. The first part of the study has been reported in Rasmussen and Thorning (2012).The starting point of the study was a need for more knowledge on methods that could be used for hydrocarbon exploration in Danish onshore areas, as an alternative to seismic investigations, when these cannot be used for nature protecting reasons. DONG E and P A/S and Nordsoefonden approached GEUS, suggesting a study of seven different non-seismic methods. The Danish Energy Agency was interested in the subject and requested that an actual test of a method be carried out as a part of the project. The optimum choice for a field test was an electromagnetic experiment with a galvanic controlled source (Rasmussen and Thorning, 2012). However, due to organisational issues and a limited timeframe of the project, the final choice of method for the field test was settled on using the magnetotelluric method (MT). Though MT does not utilise galvanic controlled sources, and hence does not serve as a tool for direct hydrocarbon exploration, MT has been used in the past in relation with hydrocarbon exploration onshore and has recently gained considerable interest in China. A contract was entered with Uppsala University for some initial tests of the magnetotelluric (MT) method. The test was carried out August 2012 in an area around Toender, and is reported here as ALTKUL Project Report Part 2. In total 42 MT stations were measured in a 180 km{sup 2} area. The digital data are enclosed with the report and hereby released to the public. A 3D model of the electrical resistivity variations to a depth of 6 km constitutes, together with the actual measured data, the main results of part 2 of the ALTKUL project. The 3D model was derived from an unconstrained 3D inversion of the MT data. The MT data show that pronounced lateral resistivity variations exist at the depth of interest for

  20. Hanford Facility dangerous waste permit application, liquid effluent retention facility and 200 area effluent treatment facility

    Energy Technology Data Exchange (ETDEWEB)

    Coenenberg, J.G.

    1997-08-15

    The Hanford Facility Dangerous Waste Permit Application is considered to 10 be a single application organized into a General Information Portion (document 11 number DOE/RL-91-28) and a Unit-Specific Portion. The scope of the 12 Unit-Specific Portion is limited to Part B permit application documentation 13 submitted for individual, `operating` treatment, storage, and/or disposal 14 units, such as the Liquid Effluent Retention Facility and 200 Area Effluent 15 Treatment Facility (this document, DOE/RL-97-03). 16 17 Both the General Information and Unit-Specific portions of the Hanford 18 Facility Dangerous Waste Permit Application address the content of the Part B 19 permit application guidance prepared by the Washington State Department of 20 Ecology (Ecology 1987 and 1996) and the U.S. Environmental Protection Agency 21 (40 Code of Federal Regulations 270), with additional information needs 22 defined by the Hazardous and Solid Waste Amendments and revisions of 23 Washington Administrative Code 173-303. For ease of reference, the Washington 24 State Department of Ecology alpha-numeric section identifiers from the permit 25 application guidance documentation (Ecology 1996) follow, in brackets, the 26 chapter headings and subheadings. A checklist indicating where information is 27 contained in the Liquid Effluent Retention Facility and 200 Area Effluent 28 Treatment Facility permit application documentation, in relation to the 29 Washington State Department of Ecology guidance, is located in the Contents 30 Section. 31 32 Documentation contained in the General Information Portion is broader in 33 nature and could be used by multiple treatment, storage, and/or disposal units 34 (e.g., the glossary provided in the General Information Portion). Wherever 35 appropriate, the Liquid Effluent Retention Facility and 200 Area Effluent 36 Treatment Facility permit application documentation makes cross-reference to 37 the General Information Portion, rather than duplicating

  1. Hanford Facility dangerous waste permit application, liquid effluent retention facility and 200 area effluent treatment facility

    International Nuclear Information System (INIS)

    Coenenberg, J.G.

    1997-01-01

    The Hanford Facility Dangerous Waste Permit Application is considered to 10 be a single application organized into a General Information Portion (document 11 number DOE/RL-91-28) and a Unit-Specific Portion. The scope of the 12 Unit-Specific Portion is limited to Part B permit application documentation 13 submitted for individual, 'operating' treatment, storage, and/or disposal 14 units, such as the Liquid Effluent Retention Facility and 200 Area Effluent 15 Treatment Facility (this document, DOE/RL-97-03). 16 17 Both the General Information and Unit-Specific portions of the Hanford 18 Facility Dangerous Waste Permit Application address the content of the Part B 19 permit application guidance prepared by the Washington State Department of 20 Ecology (Ecology 1987 and 1996) and the U.S. Environmental Protection Agency 21 (40 Code of Federal Regulations 270), with additional information needs 22 defined by the Hazardous and Solid Waste Amendments and revisions of 23 Washington Administrative Code 173-303. For ease of reference, the Washington 24 State Department of Ecology alpha-numeric section identifiers from the permit 25 application guidance documentation (Ecology 1996) follow, in brackets, the 26 chapter headings and subheadings. A checklist indicating where information is 27 contained in the Liquid Effluent Retention Facility and 200 Area Effluent 28 Treatment Facility permit application documentation, in relation to the 29 Washington State Department of Ecology guidance, is located in the Contents 30 Section. 31 32 Documentation contained in the General Information Portion is broader in 33 nature and could be used by multiple treatment, storage, and/or disposal units 34 (e.g., the glossary provided in the General Information Portion). Wherever 35 appropriate, the Liquid Effluent Retention Facility and 200 Area Effluent 36 Treatment Facility permit application documentation makes cross-reference to 37 the General Information Portion, rather than duplicating

  2. Radiation transport phenomena and modeling. Part A: Codes; Part B: Applications with examples

    International Nuclear Information System (INIS)

    Lorence, L.J. Jr.; Beutler, D.E.

    1997-09-01

    This report contains the notes from the second session of the 1997 IEEE Nuclear and Space Radiation Effects Conference Short Course on Applying Computer Simulation Tools to Radiation Effects Problems. Part A discusses the physical phenomena modeled in radiation transport codes and various types of algorithmic implementations. Part B gives examples of how these codes can be used to design experiments whose results can be easily analyzed and describes how to calculate quantities of interest for electronic devices

  3. Detection and treatment of hyperthyroidism in sea coastal areas and chemically polluted areas in Gujarat, (western part) India

    International Nuclear Information System (INIS)

    Om Prakash; Mayank, M.; Rachh, S.; Patel, N.; Patel, K.M.; Soni, M.K.; Bhatt, V.

    2010-01-01

    Full text: Thyrotoxicosis results from a high level of thyroid hormone in blood. 131 I therapy for this is very safe treatment. Surgery is not acceptable in youngsters because of cosmetic point of view. Objective: In India most of thyrotoxicosis occurs in sea coastal region and hypothyroidism in Himalayan region. The main objective of this study to evaluate, the effect of geographical distribution and chemical pollution on thyroid. To calculate exact dose based on gland size. Materials and Methods: 160 patients of primary hyperthyroidism were selected. Age group range between 15-65 yrs. All patients from Gujarat (India) it is located in western part of India. It's sea coast is approx. 1600 km long. Here Asia's largest chemical zone is situated. Method: 5ml of blood collected from each patient. T3,T4 and TSH test done by RIA and IRMA techniques. After that 99m TcO 4 - Scintigraphy done by gamma camera (GE infinia) 15 days before administration of 131 I all iodine containing food and drugs had been stopped, even iodized salts also. 20 patients got fixed dose of 131 I 10 mci per patient. 140 patients got 120 micro curie per gram of thyroid tissues weight. Follow up study done after 6 months of 131 I administration. Thyroid function test and scintigraphy done to evaluate pre and post therapy changes. Result: 60% of treated patients from sea coastal area, 25% from chemical and 15% from planes. The patients who got fixed dose 10 mci 131 I, of them 35% became hypothyroid and 3% got 2nd dose (13-15 mci) other group who got 120 micro curie 131 I per gram of thyroid tissue of them only 10% became hypothyroid but 5.4% had been treated with 20% more 131 I than primary dose. In the age group of 50-65 yrs on ECG cardiac arrhythmia detected. Conclusion: In treatment of thyrotoxic patients 120 micro curie/gram group shows better result than fixed dose 10 mCi. 60% of treated patients were from sea coastal range, but 25% patients were from chemically polluted zone is guiding us to

  4. Computer program for calculation of complex chemical equilibrium compositions and applications. Part 1: Analysis

    Science.gov (United States)

    Gordon, Sanford; Mcbride, Bonnie J.

    1994-01-01

    This report presents the latest in a number of versions of chemical equilibrium and applications programs developed at the NASA Lewis Research Center over more than 40 years. These programs have changed over the years to include additional features and improved calculation techniques and to take advantage of constantly improving computer capabilities. The minimization-of-free-energy approach to chemical equilibrium calculations has been used in all versions of the program since 1967. The two principal purposes of this report are presented in two parts. The first purpose, which is accomplished here in part 1, is to present in detail a number of topics of general interest in complex equilibrium calculations. These topics include mathematical analyses and techniques for obtaining chemical equilibrium; formulas for obtaining thermodynamic and transport mixture properties and thermodynamic derivatives; criteria for inclusion of condensed phases; calculations at a triple point; inclusion of ionized species; and various applications, such as constant-pressure or constant-volume combustion, rocket performance based on either a finite- or infinite-chamber-area model, shock wave calculations, and Chapman-Jouguet detonations. The second purpose of this report, to facilitate the use of the computer code, is accomplished in part 2, entitled 'Users Manual and Program Description'. Various aspects of the computer code are discussed, and a number of examples are given to illustrate its versatility.

  5. Visco-plastic Lubrication: New Areas for Application

    Science.gov (United States)

    Hormozi, Sarah; Frigaard, Ian

    2011-11-01

    Stable multi-layer flows can be achieved at high Reynolds numbers by using a yield stress fluids in a lubricating outer layer. These flows have been demonstrated to be linearly and nonlinearly stable as well as observable experimentally; see Frigaard (2001), Moyers-Gonzalez et al. (2004) and Huen et al. (2007). Recently, we have studied these flows computationally in the setting of a Newtonian core fluid surrounded by a Bingham lubricated fluid, within pipe and channel configurations; see Hormozi et al. (2011a) and Hormozi et al. (2011b). The results show that we are able to freeze in non-planar interface and form interesting patterns by retaining an unyielded plug region at the interface. Our studies open up new potential areas for application such as drop encapsulation and near net shape production of multi-layered products with axial variations. We give an overview of experimental results on establishing these exotic patterns.

  6. 31 CFR 203.8 - Application of part and procedural instructions.

    Science.gov (United States)

    2010-07-01

    ... AND THE TREASURY TAX AND LOAN PROGRAM General Information § 203.8 Application of part and procedural... account balance, SDI account balance, or a TIO account balance under this part. By accepting or...

  7. Telemed: Ehealth applications applied to underserved areas in Latin America

    International Nuclear Information System (INIS)

    Sachpazidis, Ilias; Ohl, Roland; Binotto, Alecio Pedro Delazari; Torres, Marcio Soares; Messina, Luiz Ary; Sales, Alexandre; Gomes, Ricardo; Sakas, Georgios

    2006-01-01

    Access to medical care is sometimes very difficult to be reached from people living in rural and underserved areas. This problem is very well known in rural areas in Brazil. Citizens have no access to health care. They have to travel hundreds of kilometres to receive medical care. In this paper, we will propose a medical network based on state-of-the-art medical imaging application that addresses the problems of providing health care from a distance. Additionally, we are going to show preliminarily results of the first year of the system deployment and utilization in undeserved regions in Brazil. The total number of patients submitted to ultrasound examinations, during the 10 months of projects' medical trials, is 321. The exams have begun with the elderly people (hypertension and diabetes cases) with 90% above 50-years-old. Fifty-four percent were male and 46% were female. From those exams, 67 exams (21%) needed a second medical opinion and were transmitted to Santa Casa hospital in Porto Alegre, Brazil, one of the referral medical centres. From those second opinions of Santa Casa, 12 exams had to be repeated since the acquired images were not sufficient to give a correct diagnosis. The Lagoa Tres Cantos medical doctor performed also preventive exams with patients who had not presented any symptoms (70%)

  8. A large area detector for x-ray applications

    International Nuclear Information System (INIS)

    Rodricks, B.; Huang, Qiang; Hopf, R.; Wang, Kemei.

    1993-01-01

    A large area detector for x-ray synchrotron applications has been developed. The front end of this device consist of a scintillator coupled to a fiber-optic taper. The fiber-optic taper is comprised of 4 smaller (70 mm x 70 mm) tapers fused together in a square matrix giving an active area of 140 mm x 140 mm. Each taper has a demagnification of 5.5 resulting in four small ends that are 12 mm diagonally across. The small ends of each taper are coupled to four microchannel-plate-based image intensifiers. The output from each image intensifier is focused onto a Charge Coupled Device (CCD) detector. The four CCDs are read out in parallel and are independently controlled. The image intensifiers also act as fast (20 ns) electronic shutters. The system is capable of displaying images in real time. Additionally, with independent control on the readout of each row of data from the CCD, the system is capable of performing high speed imaging through novel readout manipulation

  9. Telemed: Ehealth applications applied to underserved areas in Latin America

    Energy Technology Data Exchange (ETDEWEB)

    Sachpazidis, Ilias [Fraunhofer Institute for Computer Graphics, Fraunhoferstr. 5, D-64283, Darmstadt (Germany)]. E-mail: Ilias.Sachpazidis@igd.fraunhofer.de; Ohl, Roland [MedCom Gesellschaft fuer medizinische Bildverarbeitung mbH, Rundeturmstr. 12, D-64283, Darmstadt (Germany); Binotto, Alecio Pedro Delazari [Centro de Excelencia em Tecnologias Avancadas Av. Assis Brasil, 8450, 91, 140-000 Porto Alegre (Brazil); Torres, Marcio Soares [Centro de Excelencia em Tecnologias Avancadas Av. Assis Brasil, 8450, 91, 140-000 Porto Alegre (Brazil); Messina, Luiz Ary [Messina Informatica e Comercio Ltda., Rua Castelo Branco 330, 29100-040 Praia da Costa, Vila Velha (Brazil); Sales, Alexandre [Fundacao de Apoio ao Hospital Universitario da UFES-Fahucam, Av. Marechal Campos 1355, 29042-715 Santos Dumont, Vitoria (Brazil); Gomes, Ricardo [Complexo Hospitalar Santa Casa de Porto Alegre Rua Prof. Annes Dias 285, Porto Alegre (Brazil); Sakas, Georgios [Fraunhofer Institute for Computer Graphics, Fraunhoferstr. 5, D-64283, Darmstadt (Germany)

    2006-12-20

    Access to medical care is sometimes very difficult to be reached from people living in rural and underserved areas. This problem is very well known in rural areas in Brazil. Citizens have no access to health care. They have to travel hundreds of kilometres to receive medical care. In this paper, we will propose a medical network based on state-of-the-art medical imaging application that addresses the problems of providing health care from a distance. Additionally, we are going to show preliminarily results of the first year of the system deployment and utilization in undeserved regions in Brazil. The total number of patients submitted to ultrasound examinations, during the 10 months of projects' medical trials, is 321. The exams have begun with the elderly people (hypertension and diabetes cases) with 90% above 50-years-old. Fifty-four percent were male and 46% were female. From those exams, 67 exams (21%) needed a second medical opinion and were transmitted to Santa Casa hospital in Porto Alegre, Brazil, one of the referral medical centres. From those second opinions of Santa Casa, 12 exams had to be repeated since the acquired images were not sufficient to give a correct diagnosis. The Lagoa Tres Cantos medical doctor performed also preventive exams with patients who had not presented any symptoms (70%)

  10. 50 CFR Table 12 to Part 679 - Steller Sea Lion Protection Areas, 3nm No Groundfish Fishing Sites

    Science.gov (United States)

    2010-10-01

    ... 50 Wildlife and Fisheries 9 2010-10-01 2010-10-01 false Steller Sea Lion Protection Areas, 3nm No... EXCLUSIVE ECONOMIC ZONE OFF ALASKA Pt. 679, Table 12 Table 12 to Part 679—Steller Sea Lion Protection Areas, 3nm No Groundfish Fishing Sites Steller Sea Lion Protection Areas, 3nm No Groundfish Fishing Sites...

  11. Concentrations of radiocesium and stable elements in different parts of pine tree collected in Chernobyl area

    International Nuclear Information System (INIS)

    Yoshida, Satoshi; Watanabe, Masumi; Suzuki, Akira; Linkov, Igor; Dvornik, Alexander; Zhuchenko, Tatiana

    2007-01-01

    Radial distributions of 137 Cs and related stable elements in a pine tree collected in Chernobyl contaminated area in Belarus were determined, in order to get basic information for dose estimation of pine tree. The concentration of 137 Cs in annual tree rings was the highest in cambium, and decreased sharply toward inside. The highest concentration of 137 Cs in cambium suggests the highest radiation dose to growing part of wood. Distribution of stable Cs was similar as that of 137 Cs, and the 137 Cs/stable Cs ratio was almost constant, indicating the equilibrium of Chernobyl 137 Cs with stable Cs in the pine wood. The similar distributions as Cs were observed for K and Rb. (author)

  12. Third Conference on Artificial Intelligence for Space Applications, part 1

    Science.gov (United States)

    Denton, Judith S. (Compiler); Freeman, Michael S. (Compiler); Vereen, Mary (Compiler)

    1987-01-01

    The application of artificial intelligence to spacecraft and aerospace systems is discussed. Expert systems, robotics, space station automation, fault diagnostics, parallel processing, knowledge representation, scheduling, man-machine interfaces and neural nets are among the topics discussed.

  13. Resource Conservation and Recovery Act Part B permit application

    International Nuclear Information System (INIS)

    1992-01-01

    This permit application (Vol. 7) for the WIPP facility contains appendices related to the following information: Ground water protection; personnel; solid waste management; and memorandums concerning environmental protection standards

  14. Modelling geothermal conditions in part of the Szczecin Trough - the Chociwel area

    Science.gov (United States)

    Miecznik, Maciej; Sowiżdżał, Anna; Tomaszewska, Barbara; Pająk, Leszek

    2015-09-01

    The Chociwel region is part of the Szczecin Trough and constitutes the northeastern segment of the extended Szczecin-Gorzów Synclinorium. Lower Jurassic reservoirs of high permeability of up to 1145 mD can discharge geothermal waters with a rate exceeding 250 m3/h and temperatures reach over 90°C in the lowermost part of the reservoirs. These conditions provide an opportunity to generate electricity from heat accumulated in geothermal waters using binary ORC (Organic Rankine Cycle) systems. A numerical model of the natural state and exploitation conditions was created for the Chociwel area with the use of TOUGH2 geothermal simulator (i.e., integral finite-difference method). An analysis of geological and hydrogeothermal data indicates that the best conditions are found to the southeast of the town of Chociwel, where the bottom part of the reservoir reaches 3 km below ground. This would require drilling two new wells, namely one production and one injection. Simulated production with a flow rate of 275 m3/h, a temperature of 89°C at the wellhead, 30°C injection temperature and wells being 1.2 km separated from each other leads to a small temperature drop and moderate requirements for pumping power over a 50 years' time span. The ORC binary system can produce at maximum 592.5 kW gross power with the R227ea found as the most suitable working fluid. Geothermal brine leaving the ORC system with a temperature c. 53°C can be used for other purposes, namely mushroom growing, balneology, swimming pools, soil warming, de-icing, fish farming and for heat pumps.

  15. Modelling geothermal conditions in part of the Szczecin Trough – the Chociwel area

    Directory of Open Access Journals (Sweden)

    Miecznik Maciej

    2015-09-01

    Full Text Available The Chociwel region is part of the Szczecin Trough and constitutes the northeastern segment of the extended Szczecin-Gorzów Synclinorium. Lower Jurassic reservoirs of high permeability of up to 1145 mD can discharge geothermal waters with a rate exceeding 250 m3/h and temperatures reach over 90°C in the lowermost part of the reservoirs. These conditions provide an opportunity to generate electricity from heat accumulated in geothermal waters using binary ORC (Organic Rankine Cycle systems. A numerical model of the natural state and exploitation conditions was created for the Chociwel area with the use of TOUGH2 geothermal simulator (i.e., integral finite-difference method. An analysis of geological and hydrogeothermal data indicates that the best conditions are found to the southeast of the town of Chociwel, where the bottom part of the reservoir reaches 3 km below ground. This would require drilling two new wells, namely one production and one injection. Simulated production with a flow rate of 275 m3/h, a temperature of 89°C at the wellhead, 30°C injection temperature and wells being 1.2 km separated from each other leads to a small temperature drop and moderate requirements for pumping power over a 50 years’ time span. The ORC binary system can produce at maximum 592.5 kW gross power with the R227ea found as the most suitable working fluid. Geothermal brine leaving the ORC system with a temperature c. 53°C can be used for other purposes, namely mushroom growing, balneology, swimming pools, soil warming, de-icing, fish farming and for heat pumps.

  16. Clinical applications of imaging biomarkers. Part 2. The neurosurgeon's perspective

    Science.gov (United States)

    Brodbelt, A

    2011-01-01

    Advances in imaging, including multivoxel spectroscopy, tractography, functional MRI and positron emission spectroscopy, are being used by neurosurgeons to target aggressive areas in gliomas, and to help identify tumour boundaries, functional areas and tracts. Neuro-oncological surgeons need to understand these techniques to help maximise tumour resection, while minimising morbidity in an attempt to improve the quality of patient outcome. This article reviews the evidence for the practical use of multimodal imaging in modern glioma surgery. PMID:22433829

  17. Radiocarbon datings and glacial striae from the innar part of Boknfjord area, South Norway

    International Nuclear Information System (INIS)

    Anundsen, K.

    1977-01-01

    Whale bones overlain by moraine at Borgoey island have been dated to 12,380+-150 B.P. At Tveit, further east, whale bones overlain by littoral material were dated to 11,970+-100 B.P. These datings, together with the glacial striae in the area, show that Borgoe was covered by ice during a glacial advance at about Older Dryas Chronozone, while Tveit was not, and that a calving bay existed in the inner part of the Boknfjord area at the same time. At the mouth of Vindafjord, east of Tveit, and 3-4 km outside terminal moraines of Younger Dryas age, shells overlain by ground moraine were dated to 11,630+-100 B.P. This shows that the ice front in an early phase of the Younger Dryas glacial advance was situated at least 3-4 km beyond the pronounced Ra moraines in Vindafjord. The main trend of the shore line displacement between 12,000 and 9,500 B.P., based upon the whale bones and earlier investigations, can be established. (Auth.)

  18. 10 CFR Appendix A to Part 600 - Generally Applicable Requirements

    Science.gov (United States)

    2010-01-01

    ... 1969, as amended (42 U.S.C. 4321 et seq.), 40 CFR part 1500, as implemented by (45 FR 20694, March 28... Competitive Practices Act of 1974 (49 U.S.C. 1517). Executive Order 12138, “Creating a National Women's... National Program for Women's Business Enterprise,” (May 18, 1979) 3 CFR 1979 Comp., p. 393. Sec. 403(b...

  19. Flexible riser integrity management: areas of concern and applications

    Energy Technology Data Exchange (ETDEWEB)

    Podskarbi, Mateusz [Schlumberger Servicos de Petroleo Ltda., Rio de Janeiro, RJ (Brazil)

    2008-07-01

    Flexible risers are key enables for both deep water and shallow water offshore production developments. Number of flexible risers installed worldwide is into several thousands with two main concentration areas - offshore Brazil and North Sea. Flexible risers are subject to significant loads including environmental impacts, vessel motions, internal temperature and pressure as well as substantial installation loads. Excessive loads of one type or a combination of various types of loads can cause damage to the flexible that can lead to a catastrophic failure. Industry observed number of failures increasing in recent years. Operators and manufacturing companies are taking various steps to address this issue. One of possible approaches is to use monitoring instrumentation to measure riser response and integrity in real time. This paper reviews various types of flexible riser damage mechanisms caused by impact damage, corrosion, excessive pressure, armor wire rupture, compromising flexible riser minimum bend radius, excessive fatigue loading, etc. Failure mechanisms are reviewed with particular focus on the consequences that it causes in terms of risk to the infrastructure and detectable changes. Further part of the paper is focused on monitoring techniques employed and available to detect particular types of failure mechanisms. Systematic review of the monitoring techniques is provided with specific attention given to ability of these techniques to provide early warnings of riser failure. Evaluation of monitoring techniques versus modes of operation and failure mechanism is key to selecting appropriate system that ensures effectiveness of the integrity management program. (author)

  20. Resource Conservation and Recovery Act, Part B permit application

    International Nuclear Information System (INIS)

    1993-01-01

    This volume includes the following chapters: Waste Isolation Pilot Plant RCRA A permit application; facility description; waste analysis plan; groundwater monitoring; procedures to prevent hazards; RCRA contingency plan; personnel training; corrective action for solid waste management units; and other Federal laws

  1. Metal matrix composites. Part 1. Types, properties, applications

    International Nuclear Information System (INIS)

    Edil da Costa, C.; Velasco Lopez, F.; Torralba Castello, M.

    2000-01-01

    An overview on the state of the art of metal matrix composites used in the automotive and aerospace industries is made. These materials usually are based on light alloys (Al, Ti and Mg) and reinforced with fibres or particles. In this review, it is presented a general scope on the different MMCs families, about their properties and their main applications. (Author) 61 refs

  2. Connected Lighting System Interoperability Study Part 1: Application Programming Interfaces

    Energy Technology Data Exchange (ETDEWEB)

    Gaidon, Clement [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Poplawski, Michael [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2017-10-31

    First in a series of studies that focuses on interoperability as realized by the use of Application Programming Interfaces (APIs), explores the diversity of such interfaces in several connected lighting systems; characterizes the extent of interoperability that they provide; and illustrates challenges, limitations, and tradeoffs that were encountered during this exploration.

  3. [Polyetheretherketone (PEEK). Part II: application in clinical practice].

    Science.gov (United States)

    Pokorný, D; Fulín, P; Slouf, M; Jahoda, D; Landor, I; Sosna, A

    2010-01-01

    Polyetheretherketone (PEEK) is one of the up-to-date organic polymer thermoplastics with applications in orthopaedics and trauma medicine. This study presents a detailed analysis of its tests and applications in clinical medicine. A wide range of PEEK modifications and composites are commercially available, e.g., PEEK-Classix, PEEK-Optima, Endolign and Motis. They differ in their physical properties, which makes them suitable for different applications. Other forms, so-called PEEK bioactive composites, contain beta-tricalcium phosphate and hydroxyapatite. Research in this field is also concerned with the surface finish of this polymer thermoplastic and involves macroporous titanium and hydroxyapatite layers, or treatment with laser for an exactly defined surface structure. The clinical applications of PEEK and its composites include, in addition to components for spinal surgery, osteosynthesis plates, screws, intramedullary nails or external fixators, which are implants still at the stage of prototypes. In this review, attention is paid to the use of PEEK thermoplastics for joint replacement. Mid-term studies involving hundreds of patients have shown that, for instance, the VerSys Epoch Fullcoat Hip System (Zimmer) has a markedly lower stress-shielding effect. Carbon fibre-reinforced (CFR-PEEK) composites are used to make articulating components for total hip replacement. Their convenient properties allow for production of much thinner liners and an enlargement of the femoral head diameter, thus reducing the wear of joint implants. CFR-PEEK composites are particularly effective for hip resurfacing in which the Mitch PCR (Stryker) acetabular component has been used with good results. The MOTIS polymer acetabular cup (Invibio Ltd.) is another example. Further PEEK applications include the construction of finger-joint prostheses (Mathys AG), suture anchors (Stryker) and various kinds of augmentations (Medin). Based on the information obtained, the authors suggest

  4. Bayesian inference for psychology. Part II: Example applications with JASP.

    Science.gov (United States)

    Wagenmakers, Eric-Jan; Love, Jonathon; Marsman, Maarten; Jamil, Tahira; Ly, Alexander; Verhagen, Josine; Selker, Ravi; Gronau, Quentin F; Dropmann, Damian; Boutin, Bruno; Meerhoff, Frans; Knight, Patrick; Raj, Akash; van Kesteren, Erik-Jan; van Doorn, Johnny; Šmíra, Martin; Epskamp, Sacha; Etz, Alexander; Matzke, Dora; de Jong, Tim; van den Bergh, Don; Sarafoglou, Alexandra; Steingroever, Helen; Derks, Koen; Rouder, Jeffrey N; Morey, Richard D

    2018-02-01

    Bayesian hypothesis testing presents an attractive alternative to p value hypothesis testing. Part I of this series outlined several advantages of Bayesian hypothesis testing, including the ability to quantify evidence and the ability to monitor and update this evidence as data come in, without the need to know the intention with which the data were collected. Despite these and other practical advantages, Bayesian hypothesis tests are still reported relatively rarely. An important impediment to the widespread adoption of Bayesian tests is arguably the lack of user-friendly software for the run-of-the-mill statistical problems that confront psychologists for the analysis of almost every experiment: the t-test, ANOVA, correlation, regression, and contingency tables. In Part II of this series we introduce JASP ( http://www.jasp-stats.org ), an open-source, cross-platform, user-friendly graphical software package that allows users to carry out Bayesian hypothesis tests for standard statistical problems. JASP is based in part on the Bayesian analyses implemented in Morey and Rouder's BayesFactor package for R. Armed with JASP, the practical advantages of Bayesian hypothesis testing are only a mouse click away.

  5. Euler and applications of quantum mechanics. Paradox IH. Part 1

    Directory of Open Access Journals (Sweden)

    IVASYSHIN Henrich Stepanovich

    2014-04-01

    Full Text Available By some estimation, thirty percent of the gross national product of the USA depends on the applications of quantum mechanics in one or another form. Different aspects of the development of quantum theory are considered. Based on the residual stresses and relaxation of the stresses in the details of arbitrary forms the analysis of technological option of the Einstein–Podolsky–Rosen paradox interpretation is performed by the method of shaped coordination grid. The option refers to the mystery of measurement of two particles which are located far from each other but at the same time which quantum states are interconnected. The paper also regards the application of involute with variable evolute to increase working capacity of interfaces in free wheels, gearing and ribbon and rack mechanisms.

  6. RFID Demystified: Part 2. Applications within the supply chain.

    OpenAIRE

    Wilding, Richard D.; Delgardo, Tiago

    2004-01-01

    In our previous article we discussed the technology, benefits and barriers to implementations of Radio Frequency Identification (RFID). In this article we discuss where this technology can be applied. Essentially, it is argued that RFID systems help companies to cut costs, improve customer service, reduce labour, increase accuracy and improve supply chain throughput. RFID systems applications can be used by different industry sectors like the military, retail, industrial, life sciences, logis...

  7. Recent applications of nuclear medicine in diagnostics (I part

    Directory of Open Access Journals (Sweden)

    Giorgio Treglia

    2013-04-01

    Full Text Available Introduction: Aim of this review is to describe the recent applications of nuclear medicine techniques in diagnostics, particularly in oncology. Materials and methods: We reviewed scientific literature data searching for the current role of tomographic nuclear medicine techniques (SPECTand PET in oncology and summarized the main applications of these techniques. Results: Nuclear medicine techniques have a key role in oncology allowing early diagnosis of many tumours, an accurate staging of disease and evalutation of treatment response. Hybrid SPECT/CT and PET/CT imaging systems now provide metabolic and functional information from SPECTor PETcombined with the high spatial resolution and anatomic information of CT. The most frequent applications of SPECT/CT in oncology concern thyroid tumours, neuroendocrine tumours, bone metastases and lymph node mapping. Furthermore the evaluation of many tumours may benefit from PET/CT imaging. Discussion: The recent development of new radiopharmaceuticals and the growth of hybrid tomographic devices, such as SPECT/CT and PET/CT, now permits molecular imaging of biologic processes at the cellular level to improve both the diagnosis and treatment of many tumours.

  8. The simulation of transients in thermal plant. Part II: Applications

    International Nuclear Information System (INIS)

    Morini, G.L.; Piva, S.

    2008-01-01

    This paper deals with the simulation of the transients of thermal plant with control systems. In the companion paper forming part I of this article [G.L. Morini, S. Piva, The simulation of transients in thermal plant. Part I: Mathematical model, Applied Thermal Engineering 27 (2007) 2138-2144] it has been described how a 'thermal-library' of customised blocks can be built and used, in an intuitive way, to study the transients of any kind of thermal plant. Each component of plant such as valves, boilers, and pumps, is represented by a single block. In this paper, the 'thermal-library' approach is demonstrated by the analysis of the dynamic behaviour of a central heating plant of a typical apartment house during a sinusoidal variation of the external temperature. A comparison of the behaviour of such a plant with three way valve working either in flow rate or in temperature control, is presented and discussed. Finally, the results show the delaying effect of the thermal capacity of the building on the performance of the control system

  9. Design of belt conveyors in bulk terminal applications. Part II

    Energy Technology Data Exchange (ETDEWEB)

    Goodwin, P J; Ramos, C M

    1986-04-01

    The main design parameters used for belt conveyors in harbour applications are discussed. Conveyor belting including the carcass, belt cover, belt tension and speed, and safety factors, idlers, conveyor pulleys, motors, fluid couplings and drive arrangements are considered. Technical factors are briefly outlined for the designer to consider to achieve minimum acceptable component service life. A method is discussed to reduce coal degradation investigated using a test chute designed for the purpose of minimizing sized coal degradation at transfer points in the refurbishing of the Durban Coal Terminal. 24 references.

  10. Resource Conservation and Recovery Act, Part B permit application

    International Nuclear Information System (INIS)

    1991-02-01

    The Waste Isolation Pilot Plant (WIPP) project was authorized by the Department of Energy National Security and Military Applications of Nuclear Energy Authorization Act of 1980 (Public Law 96-164) as a research and development facility to demonstrate the safe, environmentally sound disposal of transuranic (TRU) radioactive wastes derived from the defense activities of the United States. The WIPP facility is owned and operated by the US Department of Energy (DOE). The TRU waste to be received at WIPP consists largely of such items as laboratory glassware and utensils, tools, scrap metal, shielding, personnel protection equipment, and solidified sludges from the treatment of waste water. Approximately 60 percent of this waste is ''mixed,'' that is, it is also contaminated with hazardous waste or hazardous waste constituents as defined by the Resource Conservation and Recovery Act (RCRA) and by the New Mexico Hazardous Waste Management Regulations (HWMR-5). Therefore, emplacement of TRU mixed waste in the WIPP repository is subject to regulation under HWMR-5 and RCRA. The permit application under the Resource Conservation and Recovery Act for WIPP is divided into five volumes. This document, Volume 3, is Appendix C2 continued. This appendix contains information on shipping; inventories of chemicals present in waste; chemical compatibility of wastes; the methodology to determine compatibility; analytical data regarding volatile organic compounds (VOC), metals, and solvents; and a description of sampling programs of waste drum gases

  11. Resource Conservation and Recovery Act: Part B, Permit application

    International Nuclear Information System (INIS)

    1991-02-01

    The Waste Isolation Pilot Plant (WIPP) project was authorized by the Department of Energy National Security and Military Applications of Nuclear Energy Authorization Act of 1980 (Public Law 96-164) as a research and development facility to demonstrate the safe, environmentally sound disposal of transuranic (TRU) radioactive wastes derived from the defense activities of the United States. The WIPP facility is owned and operated by the US Department of Energy (DOE). The TRU waste to be received at WIPP consists largely of such items as laboratory glassware and utensils, tools, scrap metal, shielding, personnel protection equipment, and solidified sludges from the treatment of waste water. Approximately 60 percent of this waste is ''mixed,'' that is, it is also contaminated with hazardous waste or hazardous waste constituents as defined by the Resource Conservation and Recovery Act (RCRA) and by the New Mexico Hazardous Waste Management Regulations (HWMR-5). Therefore, emplacement of TRU mixed waste in the WIPP repository is subject to regulation under HWMR-5 and RCRA. The permit application under the Resource Conservation and Recovery Act for WIPP is divided into five volumes. This document, Volume 5, contains Appendices E1, H1, I1--3, K1, K2, and L1. These appendices cover a RCRA ground water monitoring waiver, a list of job titles, the operational closure plan, the waste retrieval plan for wastes placed during the test phase, and listings of agreements between WIPP, DOE, and various state and federal agencies. 91 refs., 21 figs., 3 tabs

  12. Resource Conservation and Recovery Act, Part B Permit Application

    International Nuclear Information System (INIS)

    1993-01-01

    The Waste Isolation Pilot Plant (WIPP) Project was authorized by the US Department of Energy 5 (DOE) National Security and Military Applications of the Nuclear Energy Authorization Act of 1980 (Public Law 96-164). Its legislative mandate is to provide a research and development facility to demonstrate the safe disposal of radioactive waste resulting from national defense programs and activities. To fulfill this mandate, the WIPP facility has been designed to perform scientific investigations of the behavior of bedded salt as a repository medium and the interactions between the soft and radioactive wastes. In 1991, DOE proposed to initiate a experimental Test Phase designed to demonstrate the performance of the repository. The Test Phase activities involve experiments using transuranic (TRU) waste typical of the waste planned for future disposal at the WIPP facility. Much of this TRU waste is co-contaminated with chemical constituents which are defined as hazardous under HWMR-7, Pt. II, sec. 261. This waste is TRU mixed waste and is the subject of this application. Because geologic repositories, such as the WIPP facility, are defined under the Resource Conservation and Recovery Act (RCRA) as land disposal facilities, the groundwater monitoring requirements of HWMR-7, PLV, Subpart X, must be addressed. HWMR-7, Pt. V, Subpart X, must be addressed. This appendix demonstrates that groundwater monitoring is not needed in order to demonstrate compliance with the performance standards; therefore, HWMR-7, Pt.V, Subpart F, will not apply to the WIPP facility

  13. A Mechanism for Using Renewable Energy Applications in Remote Areas

    Directory of Open Access Journals (Sweden)

    Safwat Abdel Fattah Seleem

    2015-08-01

    Full Text Available Currently our world is facing the challenge of natural resources depletion, specifically, the depletion of fossil fuel resources. Accordingly, the implementation of the sustainable energy sources is no longer a luxury, but a key issue for survival. Egypt is one of the most fortunate locations when it comes to renewable energies such as wind and solar but implementation remains lacking.  This paper addresses this matter by offering simple applicable solutions for remote areas such as Al-Wadi Al-Jadid and Sinai. The idea is based on creating a self-sustaining simple closed system that can be replicated in different settlements which offers prosperity for the local communities. The proposed system will be designed  to  address  the  technical,  financial  and  social  barriers  that  prevent  renewable energies from becoming widespread in Egypt. Such a system would consist of financial institutions, suppliers, local technical capacity building, and local awareness raising and education. In addition, using the fly ash material in concrete structures aims to save energy, to reduce using of cement as the fly ash replace about of 25 % of cement quantity. Accordingly the use of fly ash material leads to reducing the emission of CO2 coming from the factories of cement. Simply, in order for renewable energy to spread, the community as a whole must benefit, private individuals must benefit by being able to make a living out of renewable energy, and the structures for finance must be available.

  14. 75 FR 54542 - Special Areas; Roadless Area Conservation; Applicability to the National Forests in Idaho...

    Science.gov (United States)

    2010-09-08

    ... between 8 a.m. and 8 p.m., Eastern Standard Time, Monday through Friday. SUPPLEMENTARY INFORMATION: The.../Restoration; and 14 acres of Forest Plan Special Area to Primitive. The FPSA classification will be removed in.../Restoration. Smith Creek Roadless Area: Change 14 acres of Forest Plan Special Area to Primitive. Correction...

  15. GSTARS computer models and their applications, part I: theoretical development

    Science.gov (United States)

    Yang, C.T.; Simoes, F.J.M.

    2008-01-01

    GSTARS is a series of computer models developed by the U.S. Bureau of Reclamation for alluvial river and reservoir sedimentation studies while the authors were employed by that agency. The first version of GSTARS was released in 1986 using Fortran IV for mainframe computers. GSTARS 2.0 was released in 1998 for personal computer application with most of the code in the original GSTARS revised, improved, and expanded using Fortran IV/77. GSTARS 2.1 is an improved and revised GSTARS 2.0 with graphical user interface. The unique features of all GSTARS models are the conjunctive use of the stream tube concept and of the minimum stream power theory. The application of minimum stream power theory allows the determination of optimum channel geometry with variable channel width and cross-sectional shape. The use of the stream tube concept enables the simulation of river hydraulics using one-dimensional numerical solutions to obtain a semi-two- dimensional presentation of the hydraulic conditions along and across an alluvial channel. According to the stream tube concept, no water or sediment particles can cross the walls of stream tubes, which is valid for many natural rivers. At and near sharp bends, however, sediment particles may cross the boundaries of stream tubes. GSTARS3, based on FORTRAN 90/95, addresses this phenomenon and further expands the capabilities of GSTARS 2.1 for cohesive and non-cohesive sediment transport in rivers and reservoirs. This paper presents the concepts, methods, and techniques used to develop the GSTARS series of computer models, especially GSTARS3. ?? 2008 International Research and Training Centre on Erosion and Sedimentation and the World Association for Sedimentation and Erosion Research.

  16. Binary analysis: 1. part: definitions and treatment of binary functions; 2. part: applications and functions of trans-coding

    International Nuclear Information System (INIS)

    Vallee, R.L.

    1968-01-01

    The study of binary groups under their mathematical aspects constitutes the matter of binary analysis, the purpose of which consists in developing altogether simple, rigorous and practical methods needed by the technicians, the engineers and all those who may be mainly concerned by digital processing. This subject, fast extending if not determining, however tends actually to play a main part in nuclear electronics as well as in several other research areas. (authors) [fr

  17. Quality Assurance Project Plan for Closure of the Central Facilities Area Sewage Treatment Plant Lagoon 3 and Land Application Area

    International Nuclear Information System (INIS)

    Lewis, Michael G.

    2016-01-01

    This quality assurance project plan describes the technical requirements and quality assurance activities of the environmental data collection/analyses operations to close Central Facilities Area Sewage treatment Plant Lagoon 3 and the land application area. It describes the organization and persons involved, the data quality objectives, the analytical procedures, and the specific quality control measures to be employed. All quality assurance project plan activities are implemented to determine whether the results of the sampling and monitoring performed are of the right type, quantity, and quality to satisfy the requirements for closing Lagoon 3 and the land application area.

  18. Quality Assurance Project Plan for Closure of the Central Facilities Area Sewage Treatment Plant Lagoon 3 and Land Application Area

    Energy Technology Data Exchange (ETDEWEB)

    Lewis, Michael G. [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-10-01

    This quality assurance project plan describes the technical requirements and quality assurance activities of the environmental data collection/analyses operations to close Central Facilities Area Sewage treatment Plant Lagoon 3 and the land application area. It describes the organization and persons involved, the data quality objectives, the analytical procedures, and the specific quality control measures to be employed. All quality assurance project plan activities are implemented to determine whether the results of the sampling and monitoring performed are of the right type, quantity, and quality to satisfy the requirements for closing Lagoon 3 and the land application area.

  19. Skin Sterility After Application of a Vapocoolant Spray Part 2.

    Science.gov (United States)

    Mlynek, Karolina; Lyahn, Hwang; Richards, Bryson; Schleicher, William; Bassiri Gharb, Bahar; Procop, Gary; Tuohy, Marion; Zins, James

    2015-08-01

    Refrigerant sprays have been used for pain relief at the time of minor office procedures. However, their sterility remains in question. This study investigates the microbiologic effect of this vapocoolant when sprayed after 70 % isopropyl alcohol skin preparation. In 50 healthy volunteers, three skin culture samples were collected: Group 1 prior to alcohol application; Group 2 after preparation with alcohol, and Group 3 after preparation with alcohol followed with vapocoolant spray. Samples were cultured in a blinded fashion and analyzed after 5 days of incubation. Gram staining was performed when cultures were positive. Bacterial growth was found in 98 % of samples prior to any skin preparation. This was reduced to 54 % after alcohol use (Group 2). Spraying with the skin refrigerant further reduced bacterial growth to 46 % (Group 3). The results showed a significant reduction in the number of positive bacterial cultures following skin preparation with alcohol and when alcohol prep was followed by vapocoolant spray (p < 0.001) compared to initial cultures. No statistical difference was observed between Groups 2 and 3 (p = 0.74). The use of the vapocoolant spray does not compromise the sterility of the skin following alcohol prep. Both 70 % isopropyl alcohol antiseptic preparation and skin preparation followed by vapocoolant spray significantly reduce skin colonization when compared to unprepared skin (p < 0.001).

  20. Combining remote ablation cutting and remote welding: opportunities and application areas

    Science.gov (United States)

    Musiol, Jan; Luetke, Matthias; Schweier, Markus; Hatwig, Jens; Wetzig, Andreas; Beyer, Eckhard; Zaeh, Michael F.

    2012-03-01

    Remote Ablation Cutting (RAC) is a most promising process for cutting thin metal sheets in the automotive, medical and consumer industry. Characteristically for the RAC are high cutting velocities for metal foils as well as material processing of box structures without spatter contamination at the inner surface. Furthermore, the system technology for RAC can also be used for other processes, like welding and marking. Thereby, the flexibility of a production unit is increased, compared to a conventional cutting system. Despite several advantages, the RAC is not yet state of the art in industrial production. Reasons for that are lacking knowledge in the area of process itself and in possible application areas. In this paper a conceptual model of the ablation and the ejection mechanism is presented. It consists of the laser beam absorption within the processing zone, the melt ejection from the kerf and the resulting spatter formation above the part surface. Besides the model, the process boundaries and limitations are identified using empirical data. Addressing possible applications, the following samples of different industrial areas are introduced to show the potential of the process: Cutting of heat exchanger plates, cylinder head seals, and cathode/anode material for Li-Ion-Batteries. Furthermore, a concept and first results of the combined processing of remote cutting and welding with one laser and one scanner optics are presented.

  1. The review of patents in the area of nanotechnologies and nanomaterials. Part 2

    Directory of Open Access Journals (Sweden)

    VLASOV Vladimir Alexeevich

    2015-08-01

    Full Text Available The inventions in the area of nanotechnologies and nanomaterials bring a great efficiency to construction, housing and communal services and joint spheres of economy. The invention «The method to produce photocatalytically active nanocrystal titanium dioxide of anatase modification (RU 2551677» refers to the methods for production of nanocrystal titanium dioxide which can be used to provide air and water photocatalytic treatment and disinfection, to create photoelectric energy converters, new composite and catalytic materials. The technical result of the new method is the reduced time consumption for hydrolysis reaction; formation of crystal structure of anatase directly as an outcome of crystallization from solution under the temperature not exceeding boiling temperature under atmosphere pressure without application of additional thermal treatment of the sediment. The invention «The method to produce ceramic composite material based on aluminium and zirconium oxide (RU 2549945» refers to manufacture of ceramic constructional and functional materials. The technical result is the production of ceramics with increased crack-resistance coefficient. The specialists may be also interested in the following nanotechnological inventions: the method to produce mixture for composite cellular concrete (RU 2543847, nanostructured welding wire (RU 2538228, nanofiber polymer material (RU 2543377, the method to produce metal nanopowders with increased stored energy (RU 2535109, the method to produce nonwoven nanocomposite material (RU 2533553, the method to produce nanodispersed nanopowders and the equipment for it (RU 2533580, the method to produce nanostructured coatings with shape memory on steel (RU 2535432, the method to apply nanodiamond material with combined electromechanical treatment (RU 2530432, the method to produce soot containing fullerenes and nanotubes from gaseous carbon matter (RU 2531291, polymer copper-containing composite and the

  2. 40 CFR Table 1 to Subpart Hhhhhh... - Applicability of General Provisions to Subpart HHHHHH of Part 63

    Science.gov (United States)

    2010-07-01

    ... Subpart HHHHHH of Part 63 1 Table 1 to Subpart HHHHHH of Part 63 Protection of Environment ENVIRONMENTAL... 1 to Subpart HHHHHH of Part 63—Applicability of General Provisions to Subpart HHHHHH of Part 63 Citation Subject Applicable to subpart HHHHHH Explanation § 63.1(a)(1)-(12) General Applicability Yes § 63...

  3. Thermoluminescence dosimetry and its applications in medicine. Part 2: history and applications

    International Nuclear Information System (INIS)

    Kron, T.

    1995-01-01

    Thermoluminescence dosimetry (TLD) has been available for dosimetry of ionising radiation for nearly 100 years. The variety of materials and their different physical forms allow the determination of different radiation qualities over a wide range of absorbed dose. This makes TL dosimeters useful in radiation protection where dose levels of μ Gy are monitored as well as in radiotherapy where doses up to several Gray are to be measured. The major advantages of TL detectors are their small physical size and that no cables or auxiliary equipment is required during the dose assessment. TLD is considered to be a good method for point dose measurements in phantoms as well as for in vivo dosimetry on patients during radiotherapy treatment. As an integrative dosimetric technique, it can be applied to personal dosimetry and it lends itself to the determination of dose distributions due to multiple or moving radiation sources (e.g. conformal and dynamic radiotherapy, computed tomography). In addition, TL dosimeters are easy to transport, and they can be mailed. This makes them well suited for intercomparison of doses delivered in different institutions. The present article aims at describing the various applications TLD has found in medicine by taking into consideration the physics and practice of TLD measurements which have been discussed in the first part of this review. 198 refs., 4 tabs., 2 figs

  4. Stochastic theory of nonequilibrium steady states and its applications. Part I

    International Nuclear Information System (INIS)

    Zhang Xuejuan; Qian Hong; Qian Min

    2012-01-01

    The concepts of equilibrium and nonequilibrium steady states are introduced in the present review as mathematical concepts associated with stationary Markov processes. For both discrete stochastic systems with master equations and continuous diffusion processes with Fokker–Planck equations, the nonequilibrium steady state (NESS) is characterized in terms of several key notions which are originated from nonequilibrium physics: time irreversibility, breakdown of detailed balance, free energy dissipation, and positive entropy production rate. After presenting this NESS theory in pedagogically accessible mathematical terms that require only a minimal amount of prerequisites in nonlinear differential equations and the theory of probability, it is applied, in Part I, to two widely studied problems: the stochastic resonance (also known as coherent resonance) and molecular motors (also known as Brownian ratchet). Although both areas have advanced rapidly on their own with a vast amount of literature, the theory of NESS provides them with a unifying mathematical foundation. Part II of this review contains applications of the NESS theory to processes from cellular biochemistry, ranging from enzyme catalyzed reactions, kinetic proofreading, to zeroth-order ultrasensitivity.

  5. The RISCOM Model in practice - recent experiences from new areas of application

    International Nuclear Information System (INIS)

    Andersson, Kjell; Wene, Clas-Otto

    2006-01-01

    The RISCOM project started with a pilot study in 1997, funded by the Swedish Nuclear Power Inspectorate (SKI) and the Swedish Radiation Protection Institute (SSI). The RISCOM Model was further developed, tested and used as part of the European RISCOM II project. The RISCOM Model has emerged as a result of efforts in the area of nuclear waste management to make decision processes for e.g. the selection of sites for final disposal transparent. This is also the area where the model was first applied when hearings were designed for the Swedish site selection process. In recent years the RISCOM Model has been used to analyze the prerequisites for transparency in several areas, and the Transparency Forum idea has been applied in practical situations, most notably for risk assessment of mobile telephone systems and cleaning-up and remediation of contaminated sites. In this paper we summarize recent experiences in applying the RISCOM model in different policy making areas, comment on some aspects where the model offers unique possibilities and emphasize some crucial issues with regard to future applications

  6. The RISCOM Model in practice - recent experiences from new areas of application

    Energy Technology Data Exchange (ETDEWEB)

    Andersson, Kjell [Karita Research AB, Taeby (Sweden); Wene, Clas-Otto [Wenergy, Lund (Sweden)

    2006-09-15

    The RISCOM project started with a pilot study in 1997, funded by the Swedish Nuclear Power Inspectorate (SKI) and the Swedish Radiation Protection Institute (SSI). The RISCOM Model was further developed, tested and used as part of the European RISCOM II project. The RISCOM Model has emerged as a result of efforts in the area of nuclear waste management to make decision processes for e.g. the selection of sites for final disposal transparent. This is also the area where the model was first applied when hearings were designed for the Swedish site selection process. In recent years the RISCOM Model has been used to analyze the prerequisites for transparency in several areas, and the Transparency Forum idea has been applied in practical situations, most notably for risk assessment of mobile telephone systems and cleaning-up and remediation of contaminated sites. In this paper we summarize recent experiences in applying the RISCOM model in different policy making areas, comment on some aspects where the model offers unique possibilities and emphasize some crucial issues with regard to future applications.

  7. City of Richland 300 Area industrial wastewater permit application

    International Nuclear Information System (INIS)

    1995-05-01

    Battelle-Pacific Northwest Labs and Westinghouse Hanford Co. are responsible for operating most of the facilities within the 300 Area; other contractors are also involved. The document gives briefly water/wastewater data: water sources, water usage, water discharge/loss, NPDES permit status, plant sewer outlets size and flow, etc. The document also includes the following attachments: 300 Area building list, Oct. 1993-Oct. 1994 300 Area water balance, waste shipments for CY 1994, complete chemical listing, sanitary sewer sampling results (12/19/94, 1/18/95, 1/15/95), and priority pollutant listings

  8. 7 CFR 4290.1940 - Integration of this part with other regulations applicable to USDA's programs.

    Science.gov (United States)

    2010-01-01

    ... Agriculture (Continued) RURAL BUSINESS-COOPERATIVE SERVICE AND RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE RURAL BUSINESS INVESTMENT COMPANY (âRBICâ) PROGRAM Miscellaneous § 4290.1940 Integration of this... extent applicable to this part, the Secretary will comply with subpart D of 7 CFR part 1900 and RD...

  9. 12 CFR Appendix III to Part 27 - Fair Housing Lending Inquiry/Application Log Sheet

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 1 2010-01-01 2010-01-01 false Fair Housing Lending Inquiry/Application Log Sheet III Appendix III to Part 27 Banks and Banking COMPTROLLER OF THE CURRENCY, DEPARTMENT OF THE TREASURY FAIR HOUSING HOME LOAN DATA SYSTEM Pt. 27, App. III Appendix III to Part 27—Fair Housing Lending...

  10. 49 CFR Appendix A to Part 1580 - High Threat Urban Areas (HTUAs)

    Science.gov (United States)

    2010-10-01

    ... * Chula Vista, Escondido, and San Diego, and a 10-mile buffer extending from the border of the combined... buffer extending from the city border Louisville, KY. LA Baton Rouge Area * Baton Rouge and a 10-mile buffer extending from the city border Baton Rouge, LA. New Orleans Area New Orleans and a 10-mile buffer...

  11. Global optimization of truss topology with discrete bar areas-Part II: Implementation and numerical results

    DEFF Research Database (Denmark)

    Achtziger, Wolfgang; Stolpe, Mathias

    2009-01-01

    we use the theory developed in Part I to design a convergent nonlinear branch-and-bound method tailored to solve large-scale instances of the original discrete problem. The problem formulation and the needed theoretical results from Part I are repeated such that this paper is self-contained. We focus...... the largest discrete topology design problems solved by means of global optimization....

  12. Protocol of Magnetic Field Area Network and its Applications

    International Nuclear Information System (INIS)

    Won, Yunjae; Kang, Shinjae; Lim, Seungok; Kahng, Hyunkook

    2012-01-01

    The social needs are increasing in the wireless communication technology based on sensors for the monitoring of natural disasters such as avalanche and storm, the management of underground conditions from ground sinking and landslide, the monitoring of pipes, wires buried under the ground, the management of building and bridge, and the monitoring of the pollutions such as soils and water. However, the conventional wireless communication systems based on EM (Electro Magnetic) waves have not supported reliable communication because of large signal strength attenuation around soil, water, and metals. In order to handle this problem, various efforts in the wireless communication area have been conducted. Magnetic Field Area Network (MFAN) supports the reliable communication service without large signal attenuation around water, soil, and metal. Therefore, Magnetic Field Area Network (MFAN) is expected to be one of promising solutions to the limit of the conventional technologies such as Radio Frequency Indentification (RFID) and Wireless Sensor Network (WSN)

  13. Protocol of Magnetic Field Area Network and its Applications

    Energy Technology Data Exchange (ETDEWEB)

    Won, Yunjae; Kang, Shinjae; Lim, Seungok [Korea Electronics Technology Institute, Seoul (Korea, Republic of); Kahng, Hyunkook [Korea Univ., Seoul (Korea, Republic of)

    2012-03-15

    The social needs are increasing in the wireless communication technology based on sensors for the monitoring of natural disasters such as avalanche and storm, the management of underground conditions from ground sinking and landslide, the monitoring of pipes, wires buried under the ground, the management of building and bridge, and the monitoring of the pollutions such as soils and water. However, the conventional wireless communication systems based on EM (Electro Magnetic) waves have not supported reliable communication because of large signal strength attenuation around soil, water, and metals. In order to handle this problem, various efforts in the wireless communication area have been conducted. Magnetic Field Area Network (MFAN) supports the reliable communication service without large signal attenuation around water, soil, and metal. Therefore, Magnetic Field Area Network (MFAN) is expected to be one of promising solutions to the limit of the conventional technologies such as Radio Frequency Indentification (RFID) and Wireless Sensor Network (WSN)

  14. Application of isostatic gravity anomaly in the Yellow Sea area

    Science.gov (United States)

    Hao, Z.; Qin, J.; Huang, W.; Wu, X.

    2017-12-01

    In order to study the deep crustal structure of the Yellow Sea area, we used the Airy-Heiskanen model to calculate the isostatic gravity anomaly of this area. Based on the Bouguer gravity anomaly and water depth data of this area, we chose the calculating parameters as standard crustal thickness 30 km, crust-mantle density difference 0.6g/cm3and grid spacing 0.1°×0.1°. This study reveals that there are six faults and four isostatic negative anomalies in the study area. The isostatic anomalies in much of Yellow Sea areas give priority to those with positive anomalies. The isostatic anomalies in North Yellow Sea are higher than South Yellow Sea with Jiashan-Xiangshui fault as the boundary. In the north of the study area, isostatic anomalies are characterized by large areas of positive anomaly. The change is relatively slow, and the trends give priority to the trend NE or NEE. In the middle of the north Yellow Sea basin, there is a local negative anomaly, arranged as a string of beads in NE to discontinuous distribution. Negative anomaly range is small, basically corresponds to the region's former Cenozoic sedimentary basin position. To the south of Jiashan-Xiangshui fault and west of Yellow Sea eastern margin fault, including most of the south Yellow Sea and Jiangsu province, the isostatic anomalies are lower. And the positive and negative anomalies are alternative distribution, and negative anomaly trap in extensive development. The trends give priority to NE, NEE, both to the NW. On the basis of the characteristics of isostatic gravity anomalies, it is concluded that the Yellow Sea belongs to continental crustal isostatic area whose isostatic anomalies is smooth and slow. ReferencesHeiskanen, W. A., F. A. V. Meinesz, and S. A. Korff (1958), The Earth and Its Gravity Field, McGraw-Hill, New York. Meng, X. J., X. H. Zhang, and J. Y. Yang (2014), Geophysical survey in eastern China seas and the characteristics of gravity and magnetic fields, Marine Geoglogy

  15. Assessment Methods of Groundwater Overdraft Area and Its Application

    Science.gov (United States)

    Dong, Yanan; Xing, Liting; Zhang, Xinhui; Cao, Qianqian; Lan, Xiaoxun

    2018-05-01

    Groundwater is an important source of water, and long-term large demand make groundwater over-exploited. Over-exploitation cause a lot of environmental and geological problems. This paper explores the concept of over-exploitation area, summarizes the natural and social attributes of over-exploitation area, as well as expounds its evaluation methods, including single factor evaluation, multi-factor system analysis and numerical method. At the same time, the different methods are compared and analyzed. And then taking Northern Weifang as an example, this paper introduces the practicality of appraisal method.

  16. Large-area metallic photonic lattices for military applications.

    Energy Technology Data Exchange (ETDEWEB)

    Luk, Ting Shan

    2007-11-01

    In this project we developed photonic crystal modeling capability and fabrication technology that is scaleable to large area. An intelligent optimization code was developed to find the optimal structure for the desired spectral response. In terms of fabrication, an exhaustive survey of fabrication techniques that would meet the large area requirement was reduced to Deep X-ray Lithography (DXRL) and nano-imprint. Using DXRL, we fabricated a gold logpile photonic crystal in the <100> plane. For the nano-imprint technique, we fabricated a cubic array of gold squares. These two examples also represent two classes of metallic photonic crystal topologies, the connected network and cermet arrangement.

  17. Numerical Investigation of a Chip Printed Antenna Performances for Wireless Implantable Body Area Network Applications

    Science.gov (United States)

    Ramli, N. H.; Jaafar, H.; Lee, Y. S.

    2018-03-01

    Recently, wireless implantable body area network (WiBAN) system become an active area of research due to their various applications such as healthcare, support systems for specialized occupations and personal communications. Biomedical sensors networks mounted in the human body have drawn greater attention for health care monitoring systems. The implantable chip printed antenna for WiBAN applications is designed and the antenna performances is investigated in term of gain, efficiency, return loss, operating bandwidth and radiation pattern at different environments. This paper is presents the performances of implantable chip printed antenna in selected part of human body (hand, chest, leg, heart and skull). The numerical investigation is done by using human voxel model in built in the CST Microwave Studio Software. Results proved that the chip printed antenna is suitable to implant in the human hand model. The human hand model has less complex structure as it consists of skin, fat, muscle, blood and bone. Moreover, the antenna is implanted under the skin. Therefore the signal propagation path length to the base station at free space environment is considerably short. The antenna’s gain, efficiency and Specific Absorption Rate (SAR) are - 13.62dBi, 1.50 % and 0.12 W/kg respectively; which confirms the safety of the antenna usage. The results of the investigations can be used as guidance while designing chip implantable antenna in future.

  18. 12 CFR 516.5 - Do the same procedures apply to all applications under this part?

    Science.gov (United States)

    2010-01-01

    ... 12 Banks and Banking 5 2010-01-01 2010-01-01 false Do the same procedures apply to all applications under this part? 516.5 Section 516.5 Banks and Banking OFFICE OF THRIFT SUPERVISION, DEPARTMENT OF THE TREASURY APPLICATION PROCESSING PROCEDURES § 516.5 Do the same procedures apply to all...

  19. Market projections of cellulose nanomaterial-enabled products- Part 1: Applications

    Science.gov (United States)

    Jo Anne Shatkin; Theodore H. Wegner; E.M. (Ted) Bilek; John Cowie

    2014-01-01

    Nanocellulose provides a new materials platform for the sustainable production of high-performance nano-enabled products in an array of applications. In this paper, potential applications for cellulose nanomaterials are identified as the first step toward estimating market volume. The overall study, presented in two parts, estimates market volume on the basis of...

  20. EVALUATION OF USAGE AND APPLICATION AREAS OF QR CODES IN SERVICE INDUSTRY

    Directory of Open Access Journals (Sweden)

    Aysel SANAL

    2018-01-01

    Full Text Available The use of QR codes accelerates the sharing of information and provides more practical access to information. In today's information age, in the limited area unlimited information, data and contents can be transferred with using QR code. This study examines how consumers use QR code technology using by the service sector and aim of inform consumers about their perception and usage levels. In the application part of the study, 180 consumers responded the survey questions. The t-test, ANOVA, variance analysis and regression analysis method were used to test hypotheses established in the research. Thus, factors affecting the perceptions of consumers on QR code technology have been identified. The finance and banking sectors have been identified as the sectors in which consumers use the QR code most frequently, and the speed and availability factors for this sector have been analyzed separately.

  1. 7 CFR 1951.232 - Water and waste disposal systems which have become part of an urban area.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 14 2010-01-01 2009-01-01 true Water and waste disposal systems which have become... Water and waste disposal systems which have become part of an urban area. A water and/or waste disposal.... The following will be forwarded to the Administrator, Attention: Water and Waste Disposal Division...

  2. 76 FR 21272 - Special Areas; Roadless Area Conservation; Applicability to the National Forests in Colorado

    Science.gov (United States)

    2011-04-15

    ... the North Fork Coal Mining Area exception due to public comments regarding the wildlife values of this... activities, such as the drilling of vent holes to extract methane gas to facilitate miner safety. These same... or economic sectors. Total annual [[Page 21279

  3. State waste discharge permit application 400 Area secondary cooling water. Revision 2

    International Nuclear Information System (INIS)

    1996-01-01

    This document constitutes the Washington Administrative Code 173-216 State Waste Discharge Permit Application that serves as interim compliance as required by Consent Order DE 91NM-177, for the 400 Area Secondary Cooling Water stream. As part of the Hanford Federal Facility Agreement and Consent Order negotiations, the US Department of Energy, Richland Operations Office, the US Environmental Protection Agency, and the Washington State Department of Ecology agreed that liquid effluent discharges to the ground on the Hanford Site that affect groundwater or have the potential to affect groundwater would be subject to permitting under the structure of Chapter 173-216 of the Washington Administrative Code, the State Waste Discharge Permitting Program. As a result of this decision, the Washington State Department of Ecology and the US Department of Energy, Richland Operations Office entered into Consent Order DE 91NM-177. The Consent Order DE 91NM-177 requires a series of permitting activities for liquid effluent discharges. Based upon compositional and flow rate characteristics, liquid effluent streams on the Hanford Site have been categorized into Phase 1, Phase 2, and Miscellaneous streams. This document only addresses the 400 Area Secondary Cooling Water stream, which has been identified as a Phase 2 stream. The 400 Area Secondary Cooling Water stream includes contribution streams from the Fuels and Materials Examination Facility, the Maintenance and Storage Facility, the 481-A pump house, and the Fast Flux Test Facility

  4. A four-part working bibliography of neuroethics: Part 4 - Ethical issues in clinical and social applications of neuroscience.

    Science.gov (United States)

    Becker, Kira; Shook, John R; Darragh, Martina; Giordano, James

    2017-05-31

    As a discipline, neuroethics addresses a range of questions and issues generated by basic neuroscientific research (inclusive of studies of putative neurobiological processes involved in moral and ethical cognition and behavior), and its use and meanings in the clinical and social spheres. Here, we present Part 4 of a four-part bibliography of the neuroethics literature focusing on clinical and social applications of neuroscience, to include: the treatment-enhancement discourse; issues arising in neurology, psychiatry, and pain care; neuroethics education and training; neuroethics and the law; neuroethics and policy and political issues; international neuroethics; and discourses addressing "trans-" and "post-" humanity. To complete a systematic survey of the literature, 19 databases and 4 individual open-access journals were employed. Searches were conducted using the indexing language of the U.S. National Library of Medicine (NLM). A Python code was used to eliminate duplications in the final bibliography. When taken with Parts 1-3, this bibliography aims to provide a listing of international peerreviewed papers, books, and book chapters published from 2002 through 2016. While seeking to be as comprehensive as possible, it may be that some works were inadvertently and unintentionally not included. We therefore invite commentary from the field to afford completeness and contribute to this bibliography as a participatory work-in-progress.

  5. Ultra Wideband Wireless Body Area Network for Medical Applications

    Science.gov (United States)

    2010-04-01

    Medical Applications RTO-MP-HFM-182 42 - 11 z x y Tumour Fat Skin Chest Figure 8: A Simple Hemispherical Brest Model. Table 2...x y Tumour Fat Skin Chest wall  Glands Nipple Figure 9: A Comprehensive Hemispherical Brest Model. The base diameter of the breast is...34 in Proc. 2nd European Radar Conference (EuRAD), Paris , France, October 6–7, 2005, pp. 97–100. [38] M. Sugawara, K. Niki, H. Furuhata, S. Ohnishi

  6. Determination of extent of the subsiding areas in the Czech part of Upper Silesian Basin

    Czech Academy of Sciences Publication Activity Database

    Kadlečík, Pavel; Kajzar, Vlastimil; Marek, Tomáš

    -, Part 2 (2012), s. 715-721 ISSN 1314-2704. [International Multidisciplinary Scientific GeoConference & EXPO SGEM 2012 /12./. Albena, 17.06.2012-23.06.2012] Institutional research plan: CEZ:AV0Z30460519; CEZ:AV0Z30860518 Keywords : Upper Silesian Basin * mining * subsidence Subject RIV: DE - Earth Magnetism, Geodesy, Geography

  7. Large area smoothing of surfaces by ion bombardment: fundamentals and applications

    International Nuclear Information System (INIS)

    Frost, F; Fechner, R; Ziberi, B; Voellner, J; Flamm, D; Schindler, A

    2009-01-01

    Ion beam erosion can be used as a process for achieving surface smoothing at microscopic length scales and for the preparation of ultrasmooth surfaces, as an alternative to nanostructuring of various surfaces via self-organization. This requires that in the evolution of the surface topography different relaxation mechanisms dominate over the roughening, and smoothing of initially rough surfaces can occur. This contribution focuses on the basic mechanisms as well as potential applications of surface smoothing using low energy ion beams. In the first part, the fundamentals for the smoothing of III/V semiconductors, Si and quartz glass surfaces using low energy ion beams (ion energy: ≤2000 eV) are reviewed using examples. The topography evolution of these surfaces with respect to different process parameters (ion energy, ion incidence angle, erosion time, sample rotation) has been investigated. On the basis of the time evolution of different roughness parameters, the relevant surface relaxation mechanisms responsible for surface smoothing are discussed. In this context, physical constraints as regards the effectiveness of surface smoothing by direct ion bombardment will also be addressed and furthermore ion beam assisted smoothing techniques are introduced. In the second application-orientated part, recent technological developments related to ion beam assisted smoothing of optically relevant surfaces are summarized. It will be demonstrated that smoothing by direct ion bombardment in combination with the use of sacrificial smoothing layers and the utilization of appropriate broad beam ion sources enables the polishing of various technologically important surfaces down to 0.1 nm root mean square roughness level, showing great promise for large area surface processing. Specific examples are given for ion beam smoothing of different optical surfaces, especially for substrates used for advanced optical applications (e.g., in x-ray optics and components for extreme

  8. K-Ar ages of the Nyuto-Takakura volcanic products, southern part of the Sengan geothermal area, northeast Japan

    International Nuclear Information System (INIS)

    Suto, Shigeru; Uto, Kozo; Uchiumi, Shigeru

    1990-01-01

    The K-Ar age determination of the volcanic rocks from the Nyuto-Takakura volcano group, northeast Japan, was carried out. Nyuto-Takakura volcanoes are situated in the southern part of the Sengan geothermal area. And the Young Volcanic Rocks in the area were already divided into the Early stage volcanics (erupted in Matsuyama reversed epoch or more older epoch) and the Later stage volcanics (erupted in Brunhes normal epoch) by accumulated paleomagnetic and K-Ar age data. The results in this study are as follows; Nyuto Volcano: 0.63±0.06, 0.36±0.07 Ma, Sasamoriyama Volcano: 0.09±0.07, 0.3±0.3 Ma, Marumori Lava Dome: 0.4±0.3, 0.31±0.12 Ma, Mikadoyama Lava Dome: <1 Ma, Takakurayama-Kotakakurayama volcano: 1.4±0.5, 1.0±0.4, <0.4 Ma. The determinated ages are concordant with the volcanic stratigraphy and the paleomagnetic data. Nyuto Volcano, Sasamoriyama Volcano, Marumori Lava Dome, Mikadoyama Lava Dome and upper part of the Takakurayama-Kotakakurayama Volcano are interpreted to be erupted in Brunhes normal epoch. The volcanic rocks from the lower part of the Takakurayama-Kotakakurayama volcano show normal magnetic polarity, so they are interpreted to be erupted in Jaramillo normal polarity event. The Early stage volcanics and the Later stage volcanics in the studied area are tend to be distributed in the central part and the outer part of the area, respectively. But the determinated ages in this study show that there is no simple migration of the eruption center of the volcanic rocks from the central part to the peripheral part. There is no geothermal manifestation or alteration area around the Sasamoriyama Volcano and the Marumori Lava Dome, which are the youngest volcanoes in the studied area. So it is concluded that there is no direct correlation between the eruption age of the nearest volcano and the geothermal activity. (author)

  9. Seaweed Investment as Application in Development of Minapolitan Area

    Directory of Open Access Journals (Sweden)

    Caroline Caroline

    2013-12-01

    Full Text Available Consequences of regional autonomy is not easy, this is because a required area should look for alternative sources of financing regional. One of the sources of financing in the Brebes district is the development of seaweed cultivation to be exported to other countries. The calculations show that the investment in seaweed farming is feasible to be developed because of the many advantages gained than seaweed farming. The first advantage of the presence of a source of income for local communities and Brebes district, opening job opportunities broadly, to develop products made from seaweed such as cosmetics, pharmaceuticals, herbs, jelly, and so forth.

  10. In the Soup: Integrating and Correlating Social Studies with Other Curriculum Areas: Part Two.

    Science.gov (United States)

    Atwood, Virginia A.; And Others

    1989-01-01

    Demonstrates a thematic approach, using soup as the theme, to integrate and correlate elementary social studies with other subject areas. Outlines four soup activities, presenting goals, materials, strategies, and extensions of each. Stresses how integrated curricula effectively develops skills such as observing, inferring, serial ordering, and…

  11. High performance poly(etherketoneketone) (PEKK) composite parts fabricated using Big Area Additive Manufacturing (BAAM) processes

    Energy Technology Data Exchange (ETDEWEB)

    Kunc, Vlastimil [ORNL; Kishore, Vidya [ORNL; Chen, Xun [ORNL; Ajinjeru, Christine [ORNL; Duty, Chad [University of Tennessee (UTK) and Oak Ridge National Laboratory (ORNL); Hassen, Ahmed A [ORNL

    2016-09-01

    ORNL collaborated with Arkema Inc. to investigate poly(etherketoneketone) (PEKK) and its composites as potential feedstock material for Big Area Additive Manufacturing (BAAM) system. In this work thermal and rheological properties were investigated and characterized in order to identify suitable processing conditions and material flow behavior for BAAM process.

  12. Reactive dual magnetron sputtering for large area application

    International Nuclear Information System (INIS)

    Struempfel, J.

    2002-01-01

    Production lines for large area coating demand high productivity of reactive magnetron sputtering processes. Increased dynamic deposition rates for oxides and nitrides were already obtained by using of highly powered magnetrons in combination with advanced sputter techniques. However, besides high deposition rates the uniformity of such coatings has to be carefully considered. First the basics of reactive sputtering processes and dual magnetron sputtering are summarized. Different methods for process stabilization and control are commonly used for reactive sputtering. The Plasma Emission Monitor (PE M) offers the prerequisite for fast acting process control derived from the in-situ intensity measurements of a spectral line of the sputtered target material. Combined by multiple Plasma Emission Monitor control loops segmented gas manifolds are able to provide excellent thin film uniformity at high deposition rates. The Dual Magnetron allows a broad range of processing by different power supply modes. Medium frequency, DC and pulsed DC power supplies can be used for high quality layers. Whereas the large area coating of highly isolating layers like TiO 2 or SiO 2 is dominated by MF sputtering best results for coating with transparent conductive oxides are obtained by dual DC powering of the dual magnetron arrangement. (Author)

  13. Construction Biotechnology: a new area of biotechnological research and applications.

    Science.gov (United States)

    Stabnikov, Viktor; Ivanov, Volodymyr; Chu, Jian

    2015-09-01

    A new scientific and engineering discipline, Construction Biotechnology, is developing exponentially during the last decade. The major directions of this discipline are selection of microorganisms and development of the microbially-mediated construction processes and biotechnologies for the production of construction biomaterials. The products of construction biotechnologies are low cost, sustainable, and environmentally friendly microbial biocements and biogrouts for the construction ground improvement. The microbial polysaccharides are used as admixtures for cement. Microbially produced biodegradable bioplastics can be used for the temporarily constructions. The bioagents that are used in construction biotechnologies are either pure or enrichment cultures of microorganisms or activated indigenous microorganisms of soil. The applications of microorganisms in the construction processes are bioaggregation, biocementation, bioclogging, and biodesaturation of soil. The biotechnologically produced construction materials and the microbially-mediated construction technologies have a lot of advantages in comparison with the conventional construction materials and processes. Proper practical implementations of construction biotechnologies could give significant economic and environmental benefits.

  14. Applicability of Hilt's law to the Czech part of the Upper Silesian Coal Basin (Czech Republic)

    International Nuclear Information System (INIS)

    Sivek, Martin; Caslavsky, Marek; Jirasek, Jakub

    2008-01-01

    Hilt's law (dependence of the coalification degree on depth) is a substantial and long-acknowledged rule. Its validity in the Czech part of the Upper Silesian Coal Basin (Carboniferous, Mississippian to Pennsylvanian - Lower Namurian to Westphalian A) is the subject of this study. It is based on over 29,000 analyses of the volatile matter moisture- and ash-free (V daf ) from surface and underground boreholes drilled in 1946-1989. Vitrinite reflectance (R max ) cannot be used as a measure of coalification in the Upper Silesian Coal Basin: the number of reflectance measurements is small and their distribution over the basin area is very uneven. Statistical data on V daf for the individual stratal units were processed. Modelling of the trends in the volatile matter moisture- and ash-free (V daf ) depending on ''stratigraphic depth'' proved the general applicability of Hilt's law. The distribution of this parameter in selected boreholes and segments of the basin was also studied, and coalification gradients were calculated. Coalification in specific examples (boreholes) is, however, highly variable and shows numerous deviations from Hilt's law even within individual boreholes, which is documented on a real example. The causes of some of the deviations are relatively well known (e.g., effect of elevated pressure in tectonically deformed areas, effect of effusive rocks or paleoweathering zones) while others can be presumed (heat flows due to Variscan and Carpathian orogenies affected by the lithology of the Carboniferous massif). The contribution of these effects in specific examples can be determined with great difficulty only. (author)

  15. Rb-Sr geochronolgy of the Jervois Range area in the eastern part of the Arunta Block, NT

    International Nuclear Information System (INIS)

    Black, L.P.

    1980-01-01

    New Rb-Sr isotopic data are presented for the Jervois Range area in the eastern part of the Arunta Block. The post-metamorphic Jinka and Jervois Granites yield an age of about 1750 m.y. An alaskitic granite is dated at about 1460 m.y. Pegmatite formation occurred about 1660 m.y. ago. Mineral ages are generally younger than total-rock ages, but no values significantly less than that of the alaskitic granite were found. This means that the Alice Springs Orogeny, which extensively reset large areas of the Arunta Block to the west, did not effect the Jervois area. In this and other geochronological comparisons, the Jervois area seems more akin to the rocks of the Tennant Creek Block, 400 km to the northwest, than to those of the Arunta Block

  16. 13 CFR 120.835 - Application to expand an Area of Operations.

    Science.gov (United States)

    2010-01-01

    ... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Application to expand an Area of Operations. 120.835 Section 120.835 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION BUSINESS... program responsibilities in the proposed area. (b) Local Economic Area Expansion. A CDC seeking to expand...

  17. Area 2 Photo Skid Wastewater Pit corrective action decision document Corrective Action Unit Number 332: Part 1, and Closure report: Part 2

    International Nuclear Information System (INIS)

    1997-01-01

    The Area 2 Photo Skid Wastewater Pit, Corrective Action Site (CAS) Number 02-42-03, the only CAS in Corrective Action Unit (CAU) Number 332, has been identified as a source of unquantified, uncontrolled, and unpermitted wastewater discharge. The Photo Skid was used for photographic processing of film for projects related to weapons testing, using Kodak RA4 and GPX film processing facilities for black and white and color photographs. The CAU is located in Area 2 of the Nevada Test Site, Nye County, Nevada. The CAS consists of one unlined pit which received discharged photographic process wastewater from 1984 to 1991. The Corrective Action Decision Document (CADD) and the Closure Report (CR) have been developed to meet the requirements of the Federal Facility Agreement and Consent Order (FFACO, 1996). The CADD and the CR for this CAS have been combined because sample data collected during the site investigation do not exceed regulatory limits established during the Data Quality Objectives (DQO) process. The purpose of the CADD and the CR is to justify why no corrective action is necessary at the CAU based on process knowledge and the results of the corrective action investigation and to request closure of the CAU. This document contains Part 1 of the CADD and Part 2 of the CR

  18. 50 CFR Table 23 to Part 679 - Aleutian Islands Coral Habitat Protection Areas

    Science.gov (United States)

    2010-10-01

    ... ECONOMIC ZONE OFF ALASKA Pt. 679, Table 23 Table 23 to Part 679—Aleutian Islands Coral Habitat Protection....69 N 176 12.44 W 52 6.59 N 176 6.12 W 2 Cape Moffett I 52 0.11 N 176 46.65 W 52 0.10 N 176 53.00 W 51 55.69 N 176 53.00 W 51 55.69 N 176 48.59 W 51 57.96 N 176 46.52 W 3 Adak Canyon 51 39.00 N 177 0.00 W...

  19. Drones application on snow and ice surveys in alpine areas

    Science.gov (United States)

    La Rocca, Leonardo; Bonetti, Luigi; Fioletti, Matteo; Peretti, Giovanni

    2015-04-01

    First results from Climate change are now clear in Europe, and in Italy in particular, with the natural disasters that damaged irreparably the territory and the habitat due to extreme meteorological events. The Directive 2007/60/EC highlight that an "effective natural hazards prevention and mitigation that requires coordination between Member States above all on natural hazards prevention" is necessary. A climate change adaptation strategy is identified on the basis of the guidelines of the European Community program 2007-2013. Following the directives provided in the financial instrument for civil protection "Union Civil Protection Mechanism" under Decision No. 1313/2013 / EU of the European Parliament and Council, a cross-cutting approach that takes into account a large number of implementation tools of EU policies is proposed as climate change adaptation strategy. In last 7 years a network of trans-Alpine area's authorities was created between Italy and Switzerland to define an adaptive strategy on climate change effects on natural enviroment based on non structural remedies. The Interreg IT - CH STRADA Project (STRategie di ADAttamento al cambiamento climatico) was born to join all the non structural remedies to climate change effects caused by snow and avalanches, on mountain sources, extreme hydrological events and to manage all transnational hydrological resources, involving all stakeholders from Italy and Switzerland. The STRADA project involved all civil protection authorities and all research centers in charge of snow, hydrology end civil protection. The Snow - meteorological center of the Regional Agency for Environment Protection (CNM of ARPA Lombardia) and the Civil Protection of Lombardy Region created a research team to develop tools for avalanche prediction and to observe and predict snow cover on Alpine area. With this aim a lot of aerial photo using Drone as been performed in unusual landscape. Results of all surveys were really interesting on a

  20. Development of complex simulation suite 'VEB' and application area expansion - 15326

    International Nuclear Information System (INIS)

    Obraztsov, E.; Kapista, D.; Kremnev, I.; Korokhov, T.; Kukhtevich, V.; Bezlepkin, V.

    2015-01-01

    Complex simulation suite 'Virtual Unit of NPP' (CSS 'VEB') is a set of connected software tools and computer codes that allow the simulation of various physical processes occurring in a power nuclear reactor (initially VVER - pressurized water reactor). A coupled computational model developed by means of CSS 'VEB' is based on a specific design and called an NPP Virtual Power Unit (VPU). And in November 2012 a pilot version of the Leningrad NPP-2 VPU (NPP-2006 design with water-cooled power reactor) successfully passed acceptance tests. The paper presents further development of CSS 'VEB' and application area expansion both on new tasks such as VPU calculations for the Probability Safety Analysis (PSA) and all modeling of other NPP types, like sodium-cooled reactor (that means a possibility to create a VPU not only for NPP with PWR). In the first part of this paper we will recall the basic idea and concept of CSS 'VEB' and VPU. Then we will describe the main components of CSS 'VEB' and their improvements. In the last part we will briefly describe the broadening of VPU uses

  1. THE PILOT STUDY OF CHARACTERISTICS OF HOUSEHOLD WASTE GENERATED IN SUBURBAN PARTS OF RURAL AREAS

    Directory of Open Access Journals (Sweden)

    Aleksandra Steinhoff-Wrześniewska

    2015-02-01

    Full Text Available The subject of the studies were waste generated in suburban households, in 3-bag system. The sum of wastes generated during the four analyzed seasons (spring, summer, autumn, winter – 1 year, in the households under study, per 1 person, amounted to 170,3 kg (in wet mass basis. For 1 person, most domestic waste was generated in autumn – 45,5 kg per capita and the least in winter – 39,0 kg per capita. The analysis performed of sieved composition (size fraction showed that fractions: >100 mm, 40–100 mm, 20–40 mm constituted totally 80% of the mass of wastes (average in a year. The lowest fraction (<10 mm, whose significant part constitutes ashes, varied depending on the season of year: from 3.5% to 12.8%. In the morphological composition of the households analyzed (on average in 4 seasons, biowastes totally formed over 53% of the whole mass of wastes. A significant part of waste generated were also glass waste (10,7% average per year and disposable nappies (8,3% average per year. The analysis of basic chemical components of biowastes showed that in case of utilizing them for production of compost, it would be necessary to modify (correct the ratios C/N and C/P. Analysis of the chemical composition showed that the biowastes were characterized by very high moisture content and neutral pH.

  2. Adipose-Derived Stem Cells and Application Areas

    Directory of Open Access Journals (Sweden)

    Mujde Kivanc

    2015-09-01

    Full Text Available The use of stem cells derived from adipose tissue as an autologous and self-replenishing source for a variety of differentiated cell phenotypes, provides a great deal of promise for reconstructive surgery. The secret of the human body, stem cells are reserved. Stem cells are undifferentiated cells found in the human body placed in any body tissue characteristics that differentiate and win ever known to cross the tissue instead of more than 200 diseases and thus improve and, rejuvenates the tissues. So far, the cord blood of newborn babies are used as a source of stem cells, bone marrow, and twenty years after tooth stem cells in human adipose tissue, scientists studied more than other sources of stem cells in adipose tissue and discovered that. Increase in number of in vitro studies on adult stem cells, depending on many variables is that the stem cells directly to the desired soybean optimization can be performed.. We will conclude by assessing potential avenues for developing this incredibly promising field. The aim of this paper is to review the existing literature on applications of harvest, purification, characterization and cryopreservation of adipose-derived stem cells (ASCs. [Cukurova Med J 2015; 40(3.000: 399-408

  3. Droplet digital PCR technology promises new applications and research areas.

    Science.gov (United States)

    Manoj, P

    2016-01-01

    Digital Polymerase Chain Reaction (dPCR) is used to quantify nucleic acids and its applications are in the detection and precise quantification of low-level pathogens, rare genetic sequences, quantification of copy number variants, rare mutations and in relative gene expressions. Here the PCR is performed in large number of reaction chambers or partitions and the reaction is carried out in each partition individually. This separation allows a more reliable collection and sensitive measurement of nucleic acid. Results are calculated by counting amplified target sequence (positive droplets) and the number of partitions in which there is no amplification (negative droplets). The mean number of target sequences was calculated by Poisson Algorithm. Poisson correction compensates the presence of more than one copy of target gene in any droplets. The method provides information with accuracy and precision which is highly reproducible and less susceptible to inhibitors than qPCR. It has been demonstrated in studying variations in gene sequences, such as copy number variants and point mutations, distinguishing differences between expression of nearly identical alleles, assessment of clinically relevant genetic variations and it is routinely used for clonal amplification of samples for NGS methods. dPCR enables more reliable predictors of tumor status and patient prognosis by absolute quantitation using reference normalizations. Rare mitochondrial DNA deletions associated with a range of diseases and disorders as well as aging can be accurately detected with droplet digital PCR.

  4. Operational water management applications of snowcovered area observations

    Science.gov (United States)

    Rango, A.; Salomonson, V. V.; Foster, J. L.

    1975-01-01

    An effort was made to evaluate the utility of satellite snowcover observations for seasonal streamflow prediction. On a representative, large watershed(10 to the 5th power to 10 to the sixth power sq km) it was found, based on six years of data, that meteorological satellite observations of snow cover early in the snowmelt season exhibit a relationship to seasonal runoff having a statistically significant coefficient of determination of 0.92. Analyses of LANDSAT-1 snow-cover observations over the Wind River Mountains of Wyoming reveals that for areas with infrequent cloud cover the extent of snowcover and its change with time can be monitored on watersheds as small as 10 sq km in areal extent. The change in the snow cover with time as observed from LANDSAT-1 is found to reflect major differences in seasonal runoff from high altitude (mean altitude 3 km) and low altitude ( 3 km) watersheds. There are quantitative indications that LANDSAT observations over small watersheds could be used in a manner similar to that employed for meteorological satellite observations to relate the percent of a basin snowcovered on a given data to seasonal runoff.

  5. Dioxin/POPs legacy of pesticide production in Hamburg: part 1--securing of the production area.

    Science.gov (United States)

    Weber, Roland; Varbelow, Hans Gerhard

    2013-04-01

    α-Hexachlorocyclohexane (HCH), β-HCH, and γ-HCH (lindane) were recently included as new persistent organic pollutants (POPs) in the Stockholm Convention. Therefore, the chemicals need to be globally addressed, including the disposal of historic wastes. At most sites, the approximately 85% of HCH waste isomers were dumped. At a former lindane factory in Hamburg and some other factories the HCH, waste was recycled producing residues with high polychlorinated dibenzo-p-dioxin and dibenzofuran (PCDD/PCDF) levels. The soil and ground water under the former pesticide factory was/is highly contaminated with HCH (260 tons), chlorobenzenes (550 tons), and PCDD/PCDF (6 kg toxic equivalents (TEQ)). This contamination did not result from disposal operations but from spillages and leakages during the 30 years of the factory's production history. A containment wall has been constructed around the production area to prevent the dispersal of the pollutants. The ground water is managed by a pump and treat system. Over the last 15 years, approximately 10-30 tons of this pollution reservoir has been pumped and incinerated. For the contaminated production buildings, specific assessment and demolition technologies have been applied. In addition to their HCH waste isomer deposition, former lindane/HCH productions need to be assessed for possible recycling practice of HCH and related PCDD/PCDF contamination of the production area and buildings. Since such recycling activities have taken place at several factories in different countries, the experience of assessment and management of the described production area and contaminated buildings could be valuable. Such assessment could be addressed within the frame of the Stockholm Convention.

  6. Preliminary assessment of radiological conditions at the Ranger land application area

    International Nuclear Information System (INIS)

    Kavasnicka, J.; Bywater, J.

    1992-01-01

    Some 18 GBq of uranium and 1.5 GBq of 226 Ra were disposed of by land application on the designated disposal area by March 1989. This preliminary study, which is part of a longer-term project, outlines the assessment of external gamma radiation exposures from short-lived gamma-ray emitting decay products of 226 Ra and of internal exposures from inhalation of uranium and 226 Ra resuspended from the soil surface. The effective dose equivalent from these two exposure pathways for an adult member of the public was calculated to be about 0.05 mSv.y -1 (based on a 4 hour per day occupancy of the disposal area). This dose implies a total combined load limit of 490 kBq.m -2 of uranium plus 41 kBq.m -2 of 226 Ra. It is expected that the load limit will be reduced when all pathways and more recent data are taken into the account. 8 refs., 14 tabs., 3 figs

  7. Application of finite element method in mechanical design of automotive parts

    Science.gov (United States)

    Gu, Suohai

    2017-09-01

    As an effective numerical analysis method, finite element method (FEM) has been widely used in mechanical design and other fields. In this paper, the development of FEM is introduced firstly, then the specific steps of FEM applications are illustrated and the difficulties of FEM are summarized in detail. Finally, applications of FEM in automobile components such as automobile wheel, steel plate spring, body frame, shaft parts and so on are summarized, compared with related research experiments.

  8. THE POSSIBILITY OF SAGO STARCH MARKETING IN JAPAN FROM SAGO PRODUCING AREAS IN THE EASTERN PART OF INDONESIA

    OpenAIRE

    Datu, Diyah Yumeina R.; Katsuya, Osozawa

    2011-01-01

    Sago palm (Metroxylon sp.) is distributed and grows naturally in almost every island throughout Indonesia, especially in swampy coastal areas along rivers. After the World War II, the sago cultivation in the regions that surround Malaysia and the Western Indonesia, have been consolidated by the investors while farmers in the eastern Indonesia continue their conventional practice. Recently, these farmers in the eastern part have been shifting from sago production to others crops such as corn a...

  9. A radioecological risk assessment tool for post-accidental situations. Application in the Toulon marine area (South of France)

    International Nuclear Information System (INIS)

    Duffa, Celine; Thebault, Herve

    2010-01-01

    To estimate any post-accidental consequences in the environment and to propose adapted management plans, data concerning both radionuclides spatial dispersion and environmental sensitivity to this contamination are necessary. IRSN develops integrated tools to support experts and decision makers in post-accident situation concerning this area. This management tool aims to combine radionuclides dispersion modelling and radioecological sensitivity local maps to outline vulnerable areas front of a known release. An example of application to a maritime environment is given: the naval base of Toulon. Calculation of radionuclides dispersion is based on the existing MARS 3D hydrodynamic model. The radioecological sensitivity of the marine environment is based on the ecosystem intrinsic characteristics and the socio-economical resources. Mapping radionuclides dispersion results and sensitivity of defined zones of the studies area, we show that the Little Bay and the western part of Toulon marine area are the most vulnerable in case of accidental release occuring in the harbour. (orig.)

  10. Hydrostratigraphy and hydrogeology of the western part of Maira area, Khyber Pakhtunkhwa, Pakistan: a case study by using electrical resistivity.

    Science.gov (United States)

    Farid, Asam; Jadoon, Khanzaib; Akhter, Gulraiz; Iqbal, Muhammad Asim

    2013-03-01

    Hydrostratigraphy and hydrogeology of the Maira vicinity is important for the characterization of aquifer system and developing numerical groundwater flow models to predict the future availability of the water resource. Conventionally, the aquifer parameters are obtained by the analysis of pumping tests data which provide limited spatial information and turn out to be costly and time consuming. Vertical electrical soundings and pump testing of boreholes were conducted to delineate the aquifer system at the western part of the Maira area, Khyber Pakhtun Khwa, Pakistan. Aquifer lithology in the eastern part of the study area is dominated by coarse sand and gravel whereas the western part is characterized by fine sand. An attempt has been made to estimate the hydraulic conductivity of the aquifer system by establishing a relationship between the pumping test results and vertical electrical soundings by using regression technique. The relationship is applied to the area along the resistivity profiles where boreholes are not drilled. Our findings show a good match between pumped hydraulic conductivity and estimated hydraulic conductivity. In case of sparse borehole data, regression technique is useful in estimating hydraulic properties for aquifers with varying lithology.

  11. Hydrostratigraphy and hydrogeology of the western part of Maira area, Khyber Pakhtunkhwa, Pakistan: A case study by using electrical resistivity

    KAUST Repository

    Farid, Asam M.

    2012-06-27

    Hydrostratigraphy and hydrogeology of the Maira vicinity is important for the characterization of aquifer system and developing numerical groundwater flow models to predict the future availability of the water resource. Conventionally, the aquifer parameters are obtained by the analysis of pumping tests data which provide limited spatial information and turn out to be costly and time consuming. Vertical electrical soundings and pump testing of boreholes were conducted to delineate the aquifer system at the western part of the Maira area, Khyber Pakhtun Khwa, Pakistan. Aquifer lithology in the eastern part of the study area is dominated by coarse sand and gravel whereas the western part is characterized by fine sand. An attempt has been made to estimate the hydraulic conductivity of the aquifer system by establishing a relationship between the pumping test results and vertical electrical soundings by using regression technique. The relationship is applied to the area along the resistivity profiles where boreholes are not drilled. Our findings show a good match between pumped hydraulic conductivity and estimated hydraulic conductivity. In case of sparse borehole data, regression technique is useful in estimating hydraulic properties for aquifers with varying lithology. © 2012 Springer Science+Business Media B.V.

  12. Faults in parts of north-central and western Houston metropolitan area, Texas

    Science.gov (United States)

    Verbeek, Earl R.; Ratzlaff, Karl W.; Clanton, Uel S.

    1979-01-01

    Hundreds of residential, commercial, and industrial structures in the Houston metropolitan area have sustained moderate to severe damage owing to their locations on or near active faults. Paved roads have been offset by faults at hundreds of locations, butted pipelines have been distorted by fault movements, and fault-induced gradient changes in drainage lines have raised concern among flood control engineers. Over 150 faults, many of them moving at rates of 0.5 to 2 cm/yr, have been mapped in the Houston area; the number of faults probably far exceeds this figure.This report includes a map of eight faults, in north-central and western Houston, at a scale useful for land-use planning. Seven of the faults, are known, to be active and have caused considerable damage to structures built on or near them. If the eighth fault is active, it may be of concern to new developments on the west side of Houston. A ninth feature shown on the map is regarded only as a possible fault, as an origin by faulting has not been firmly established.Seismic and drill-hold data for some 40 faults, studied in detail by various investigators have verified connections between scarps at the land surface and growth faults in the shallow subsurface. Some scarps, then, are known to be the surface manifestations of faults that have geologically long histories of movement. The degree to which natural geologic processes contribute to current fault movement, however, is unclear, for some of man’s activities may play a role in faulting as well.Evidence that current rates of fault movement far exceed average prehistoric rates and that most offset of the land surface in the Houston area has occurred only within the last 50 years indirectly suggest that fluid withdrawal may be accelerating or reinitiating movement on pre-existing faults. This conclusion, however, is based only on a coincidence in time between increased fault activity and increased rates of withdrawal of water, oil, and gas from

  13. Stalking by patients: doctors' experiences in a Canadian urban area (Part II)--physician responses.

    Science.gov (United States)

    Abrams, Karen M; Robinson, Gail Erlick

    2013-07-01

    Stalking involves recurrent unwanted communication, harassment, and intrusive behaviors. The aim of this study was to examine physicians' experiences of being stalked by their patients, with particular attention to the emotional impact on the physicians and their actions taken. A questionnaire designed to study the nature and the impact of stalking experiences among physicians was sent to 3159 randomly chosen physicians in the Greater Toronto Area. Approximately 15% (14.9%) of the 1190 physicians who responded reported having been stalked. The physicians reported feeling angry, frustrated, anxious, frightened, lacking control, and helpless. The physicians coped in a number of ways including terminating the physician-patient relationship, but many just ignored the problem. Most had no previous knowledge about stalking. Physicians experience a range of emotions as a result of being a victim of stalking. In view of the prevalence and the impact, physicians may benefit from education to help prepare them for the possibility of being stalked.

  14. Smart Home Communication Technologies and Applications: Wireless Protocol Assessment for Home Area Network Resources

    Directory of Open Access Journals (Sweden)

    Tiago D. P. Mendes

    2015-07-01

    Full Text Available The paper discusses Home Area Networks (HAN communication technologies for smart home and domestic application integration. The work is initiated by identifying the application areas that can benefit from this integration. A broad and inclusive home communication interface is analysed utilizing as a key piece a Gateway based on machine-to-machine (M2M communications that interacts with the surrounding environment. Then, the main wireless networks are thoroughly assessed, and later, their suitability to the requirements of HAN considering the application area is analysed. Finally, a qualitative analysis is portrayed.

  15. Resource Conservation and Recovery Act (RCRA) Part B permit application for container storage units at the Oak Ridge Y-12 Plant

    Energy Technology Data Exchange (ETDEWEB)

    1994-08-01

    This document contains Part B of the Permit Application for Container Storage Units at the Oak Ridge Y-12 Plant. Sections cover the following areas: Facility description; Waste characteristics; Process information; Ground water monitoring; Procedures to prevent hazards; Contingency plan; Personnel training; Closure plan, post closure plan, and financial requirements; Recordkeeping; Other federal laws; Organic air emissions; Solid waste management units; and Certification.

  16. Resource Conservation and Recovery Act (RCRA) Part B permit application for container storage units at the Oak Ridge Y-12 Plant

    International Nuclear Information System (INIS)

    1994-08-01

    This document contains Part B of the Permit Application for Container Storage Units at the Oak Ridge Y-12 Plant. Sections cover the following areas: Facility description; Waste characteristics; Process information; Ground water monitoring; Procedures to prevent hazards; Contingency plan; Personnel training; Closure plan, post closure plan, and financial requirements; Recordkeeping; Other federal laws; Organic air emissions; Solid waste management units; and Certification

  17. The review of patents in the area of nanotechnologies and nanomaterials. Part 4

    Directory of Open Access Journals (Sweden)

    VLASOV Vladimir Alexeevich

    2015-12-01

    Full Text Available The inventions in the area of nanotechnologies and nanomaterials produce a profound effect in construction, housing and communal services and adjacent economic fields. The invention «The method to produce foamed polyurethane nanocomposite (RU 2566149» refers to production of constructional materials, in particular to polymer composites, that includes polymer and inorganic additive. Constructional materials based on foamed polyurethane is of great interest for many areas of industrial and power engineering as well as for shipbuilding, airplane engineering and car industry; this interest is due to the fact that such materials possess high heat-insulating properties, considerable chemical resistance respect to environment (atmosphere and sometimes water as well as good soundinsulating characteristics. The use of the materials makes it possible to provide an efficient thermal protection required in structures. The method to produce foamed polyurethane nanocomposite includes preliminary mechanical activation of the modifier with the following introduction of it into hydroxyl-containing polyester under ultrasound in the quantity of 0,5–3,0% respect to the weight of the produced nanocomposite, mixing and introduction of hardening agent. The invention «The method to produce complex nanodispersed additive for high-strength concrete (RU 2563264» refers to construction and building materials industry, in particular to the methods of production of complex nanodispersed additives. In this method the suspension with solid phase concentration 3% is produced by means of ultrasound dispersion when frequency of the ultrasound is 35 kHz. The suspension contains 65–70 mas.% of mineral element – metakaolin, 30–35 mas.% of super plasticizer C-3 in the form of dry substance and water. The technical result is the decreased particle size, decreased time of ultrasound impact and simpler additive production technology. The specialists may be also interested in

  18. 42 CFR 86.21 - Applicability of 45 CFR part 74.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Applicability of 45 CFR part 74. 86.21 Section 86.21 Public Health PUBLIC HEALTH SERVICE, DEPARTMENT OF HEALTH AND HUMAN SERVICES OCCUPATIONAL SAFETY AND HEALTH RESEARCH AND RELATED ACTIVITIES GRANTS FOR EDUCATION PROGRAMS IN OCCUPATIONAL SAFETY AND HEALTH Occupational Safety and Health Training...

  19. 22 CFR Appendix B to Part 62 - Exchange Visitor Program Services, Exchange-Visitor Program Application

    Science.gov (United States)

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Exchange Visitor Program Services, Exchange-Visitor Program Application B Appendix B to Part 62 Foreign Relations DEPARTMENT OF STATE PUBLIC DIPLOMACY... Media and Communications; 03—Education; 04—Business and Commercial; 05—Banking and Financial; 06...

  20. 33 CFR Appendix G to Part 157 - Timetables for Application of Double Hull Requirements

    Science.gov (United States)

    2010-07-01

    ... Double Hull Requirements G Appendix G to Part 157 Navigation and Navigable Waters COAST GUARD, DEPARTMENT... Application of Double Hull Requirements 1. Source. These timetables conform to 46 U.S.C. 3703a(c). 2... double hull or with a double containment system determined by the Coast Guard to be as effective as a...

  1. 40 CFR 91.603 - Applicability of part 91, subpart F.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 20 2010-07-01 2010-07-01 false Applicability of part 91, subpart F. 91.603 Section 91.603 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... best of (Company Name) knowledge, true and accurate. I am aware of the penalties associated with...

  2. 22 CFR 63.2 - Applicability of this part under special circumstances.

    Science.gov (United States)

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Applicability of this part under special circumstances. 63.2 Section 63.2 Foreign Relations DEPARTMENT OF STATE PUBLIC DIPLOMACY AND EXCHANGES PAYMENTS TO AND ON BEHALF OF PARTICIPANTS IN THE INTERNATIONAL EDUCATIONAL AND CULTURAL EXCHANGE PROGRAM § 63...

  3. MATLAB-based Applications for Image Processing and Image Quality Assessment – Part II: Experimental Results

    Directory of Open Access Journals (Sweden)

    L. Krasula

    2012-04-01

    Full Text Available The paper provides an overview of some possible usage of the software described in the Part I. It contains the real examples of image quality improvement, distortion simulations, objective and subjective quality assessment and other ways of image processing that can be obtained by the individual applications.

  4. 17 CFR 403.1 - Application of part to registered brokers and dealers.

    Science.gov (United States)

    2010-04-01

    ... registered brokers and dealers. 403.1 Section 403.1 Commodity and Securities Exchanges DEPARTMENT OF THE... SECURITIES AND BALANCES § 403.1 Application of part to registered brokers and dealers. With respect to their activities in government securities, compliance by registered brokers or dealers with § 240.8c-1 of this...

  5. 17 CFR 404.1 - Application of part to registered brokers and dealers.

    Science.gov (United States)

    2010-04-01

    ... registered brokers and dealers. 404.1 Section 404.1 Commodity and Securities Exchanges DEPARTMENT OF THE... PRESERVATION OF RECORDS § 404.1 Application of part to registered brokers and dealers. Compliance by a registered broker or dealer with § 240.17a-3 of this title (pertaining to records to be made), § 240.17a-4 of...

  6. Results of research in the area of nanotechnologies and nanomaterials. Part 2

    Directory of Open Access Journals (Sweden)

    KARPOV Alexey Ivanovich

    2014-04-01

    Full Text Available To popularize scientific achievements in construction the main results of Russian and foreign scientists’ research are published in the form of abstract. Within the investigation «Obtaining and research of physical and chemical properties of nanosized system nickel–copper» experimentally proved model of synthesis of nanosized powders of system nickel–copper based on the method of reduction of metal salts from water solution has been offered; optimal conditions for obtaining radiographic pure powders have been determined. The paper also deals with conditions for obtaining and phase composition of mixed nickel and copper hydroxides including those which are stable when stored in wet conditions. The copper hydroxide stabilization method has been proposed. The practical value of performed investigation «Research of electron structure functionalized carbon nanotubes by spectographic methods with synchronous radiation» is that it developed one of the areas of physical chemistry: complex research of electron structure of carbon nanotubes including functionalized ones was carried out by the method of experimental (spectographic with synchrotron radiation of different energies and theoretical methods; the general methods of the modern applied plasmonics aimed at identification of characteristics of defects formation in carbon nanosystems of low dimension have been developed.

  7. 40 CFR Appendix H to Part 122 - Counties With Unincorporated Urbanized Areas With a Population of 250,000 or More According to...

    Science.gov (United States)

    2010-07-01

    ... Census H Appendix H to Part 122 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED.... 122, App. H Appendix H to Part 122—Counties With Unincorporated Urbanized Areas With a Population of...

  8. Injection moulding of plastic parts with laser textured surfaces with optical applications

    Science.gov (United States)

    Pina-Estany, J.; García-Granada, A. A.; Corull-Massana, E.

    2018-05-01

    The purpose of this work is to manufacture micro and nanotextured surfaces on plastic injection moulds with the aim of replicating them and obtaining plastic parts with optical applications. Different patterns are manufactured with nanosecond and femtosecond lasers in order to obtain three different optical applications: (i) homogeneous light diffusion (ii) 1D light directionality and (iii) 2D light directionality. Induction heating is used in the injections in order to improve the textures degree of replication. The steel mould and the plastic parts are analyzed with a confocal/focus variation microscope and with a surface roughness tester. A mock-up and a luminance camera are used to evaluate the homogeneity and luminance of the homogeneous light diffusion application in comparison with the current industrial solutions.

  9. Visual servoing in medical robotics: a survey. Part II: tomographic imaging modalities--techniques and applications.

    Science.gov (United States)

    Azizian, Mahdi; Najmaei, Nima; Khoshnam, Mahta; Patel, Rajni

    2015-03-01

    Intraoperative application of tomographic imaging techniques provides a means of visual servoing for objects beneath the surface of organs. The focus of this survey is on therapeutic and diagnostic medical applications where tomographic imaging is used in visual servoing. To this end, a comprehensive search of the electronic databases was completed for the period 2000-2013. Existing techniques and products are categorized and studied, based on the imaging modality and their medical applications. This part complements Part I of the survey, which covers visual servoing techniques using endoscopic imaging and direct vision. The main challenges in using visual servoing based on tomographic images have been identified. 'Supervised automation of medical robotics' is found to be a major trend in this field and ultrasound is the most commonly used tomographic modality for visual servoing. Copyright © 2014 John Wiley & Sons, Ltd.

  10. Synthesis and Applications of Large Area Graphene-Based Electrode Systems

    Science.gov (United States)

    Paul, Rajat Kanti

    Graphene is a single sheet of carbon atoms with outstanding electrical and physical properties and being exploited for applications in electronics, sensors, fuel cells, photovoltaics and energy storage. However, practical designs of graphene-based electrode systems and related experimental implementations are required to realize their widespread applications in nano- to bioelectronics. In this dissertation, different graphene-based electrode systems having metallic and semiconducting properties are synthesized optimizing process conditions. Also realized is the potential of the fabricated electrode systems by applying them in practical applications such as sensor devices and fuel cells. The zero bandgap of semimetal graphene still limits its application as an effective field-effect transistor device or a chemiresistor sensor operating at room temperature. It has been shown theoretically and experimentally that graphene nanoribbons (GNRs) or nanomeshes (GNMs) can attain a bandgap that is large enough for a transistor device, and hence would show high sensitivity to various gaseous species or biomolecules. Large-area mono- and bilayer graphene films are synthesized by a simple chemical vapor deposition (CVD) technique depending on the carbon precursors such as methane, acetylene and ethanol, and the results are compared using optical microscopy (OM), Raman spectroscopy, high-resolution transmission electron microscopy (HRTEM) and x-ray photoelectron spectroscopy (XPS). A simple reactive ion etching (RIE) combined with well-established nanosphere lithography is performed on the synthesized CVD-grown monolayer graphene platform to fabricate large area GNMs with specific dimension and periodicity. The fabricated GNMs chemiresistor sensor devices show excellent sensitivity towards NO2 and NH 3, significantly higher than their film counterparts. The GNM sensor devices exhibit sensitivities of about 4.32%/ppm (parts-per-million) in NO 2 and 0.71%/ppm in NH3 with estimated

  11. The review of patents in the area of nanotechnologies and nanomaterials. Part 3

    Directory of Open Access Journals (Sweden)

    VLASOV Vladimir Alexeevich

    2015-10-01

    Full Text Available The inventions in the area of nanotechnologies and nanomaterials produce a profound effect in construction, housing and communal services and adjacent economic fields. The invention «The method to produce body of oriented carbon nanotubes on the surface of base plate (RU 2561616» refers to the technologies for production of body of carbon nanotubes on the surface of base plate. The flow of actuation gas is formed in the reaction chamber. The flow contains carrying gas, gas hydrocarbon and predecessor of catalyst for synthesis of carbon nanotubes. In some cases, when implementing invention, the flow of inert gas is directed to the surface of the base plate. This gas flow shades the zone of synthesis of carbon nanotubes from air when its pressure exceeds the pressure of actuation gas flow. The method provides the body of oriented carbon nanotubes on the base plates with big surface: up to several square metres. The invention «Composition of mixture for asphaltic concrete (RU 2561435» refers to the construction production in highway industry and can be applied in manufacture of asphaltic concrete including nanotechnologies. The specialists may be also interested in the following nanotechnological inventions: the method to modify carbon nanomaterials (RU 2548083; nanofiber polymer material (RU 2543377; the method to produce nanosuspensions for manufacture of polymer nanocomposite (RU 2500695; the method to strengthen metal products to obtain nanostructured surface layers (RU 2527511; the method to form heat-resistant nanocomposite coating on the surface of the products made of heat-resistant nickel alloys (RU 2549813; the method to apply nanodiamond material by means of combined electromechanical treatment (RU 2530432; the method to produce soot with content of fullerens and nanotubes made of gas carbon raw material (RU 2531291; the method to produce powders of zinc oxide with surface modification for usage in construction sealing materials (RU

  12. The review of patents in the area of nanotechnologies and nanomaterials. Part 1

    Directory of Open Access Journals (Sweden)

    VLASOV Vladimir Alexeevich

    2015-04-01

    Full Text Available The inventions in the area of nanotechnologies and nanomaterials produce a profound effect in construction, housing and communal services and adjacent economic fields. The invention «The method of production of mixture for composite honeycomb concrete (RU 2543847» refers to the field of construction materials and can be used to produce non-autoclave composite honeycomb concrete of the natural hardening. This method consists of the following stages: supply of composition elements into mixer, mixing of the elements to obtain homogenous mass, introduction of dry cellulating mixture into obtained composition and further joint mixing; then obtained composition is provided with zeolite additive which is produced by means of preliminary mixing of one- or multilayer nanotubes in water with atomizer in sprayed form with further mixing with zeolite in the cyclic action mixer, the preliminary prepared dry cellulating mixture is also added. The technical result is a production of homogenous dry mixture, decrease of volume weight, increase of strength and frost resistance of non-autoclave honeycomb concrete manufactured from the specified dry mixture. The invention «Nanostructured wood and mineral composite material (RU 2542025» refers to the production of construction materials and can be used in manufacture of wood and mineral slabs and finishing materials in civil and industrial engineering. The technical result is increased strength and water-resistance. The specialists may be also interested in the following nanotechnological inventions: epoxy composition for high-strength, alcali-resistant structures (RU 2536141; nanocomposite material based on mineral binders (RU 2538410; the method to produce nanopowders of zinc oxide with surface modification for the use in building sealing material (RU 2505379; a composition for conglutination of metal products (RU 2526991; the method for production of nanodispersed powders (RU 2537678; the method of synthesis

  13. The inventions in the area of nanotechnologies and nanomaterials. Part 1

    Directory of Open Access Journals (Sweden)

    VLASOV Vladimir Alexeevich

    2016-02-01

    Full Text Available The inventions in the area of nanotechnologies and nanomaterials produce a profound effect in construction, housing and communal services and adjacent economic fields. The invention «Raw material mixture for high strength fiber concrete (RU 2569140» refers to the industry of building materials and can be used for production of concrete units in civil, industrial and road construction including ones with the use of nanotechnologies. The technical result of the invention is that it increases bending and compressive strength, corrosion resistance of fiber concrete, decreases the consumption of silica-containing component introduced into raw material mixture to increase the corrosion resistance of the basalt fiber. The invention «The device to form nanostructured shape memory coatings on the surface of the hollow details (RU 2569871» refers to engineering and metallurgy. The device contains technological unit for ion purification of the surface of the treated detail by creating glow discharge in vacuum chamber. The source of metal ion implantation is installed at the frame of vacuum chamber and is connected with control block. On the lid of vacuum chamber there is a device round the upper end of the tube with the detail. The device is for surface plastic deformation of the applied coating to obtain nanostructured shape memory layer. All that increases strength characteristics, coating reliability as well as convertible deformation and wear resistance. The specialists may be also interested in the following nanotechnological inventions: the method to produce complex nanodispersed additive for high strength concrete (RU 2563264; the method to produce graphene nanocomposite and tungsten carbide (RU 2570691; the method of ultrasound final polishing for details from constructional and tool steels and the equipment for its implementation (RU 2530678; the method to produce nanodispersed powders and the equipment for its implementation (RU 2533580; the

  14. Geologic map of outcrop areas of sedimentary units in the eastern part of the Hailey 1 degree x 2 degrees quadrangle and part of the southern part of the Challis 1 degree x 2 degrees quadrangle, south-central Idaho

    Science.gov (United States)

    Link, P.K.; Mahoney, J.B.; Bruner, D.J.; Batatian, L.D.; Wilson, Eric; Williams, F.J.C.

    1995-01-01

    The paper version of the Geologic map of outcrop areas of sedimentary units in the eastern part of the Hailey 1x2 Quadrangle and part of the southern part of the Challis 1x2 Quadrangle, south-central Idaho was compiled by Paul Link and others in 1995. The plate was compiled on a 1:100,000 scale topographic base map. TechniGraphic System, Inc. of Fort Collins Colorado digitized this map under contract for N.Shock. G.Green edited and prepared the digital version for publication as a GIS database. The digital geologic map database can be queried in many ways to produce a variety of geologic maps.

  15. Contaminants in stream sediments from seven United States metropolitan areas: part I: distribution in relation to urbanization

    Science.gov (United States)

    Nowell, Lisa H.; Moran, Patrick W.; Gilliom, Robert J.; Calhoun, Daniel L.; Ingersoll, Christopher G.; Kemble, Nile E.; Kuivila, Kathryn; Phillips, Patrick J.

    2013-01-01

    Organic contaminants and trace elements were measured in bed sediments collected from streams in seven metropolitan study areas across the United States to assess concentrations in relation to urbanization. Polycyclic aromatic hydrocarbons, polychlorinated biphenyls, organochlorine pesticides, the pyrethroid insecticide bifenthrin, and several trace elements were significantly related to urbanization across study areas. Most contaminants (except bifenthrin, chromium, nickel) were significantly related to the total organic carbon (TOC) content of the sediments. Regression models explained 45–80 % of the variability in individual contaminant concentrations using degree of urbanization, sediment-TOC, and study-area indicator variables (which represent the combined influence of unknown factors, such as chemical use or release, that are not captured by available explanatory variables). The significance of one or more study-area indicator variables in all models indicates marked differences in contaminant levels among some study areas, even after accounting for the nationally modeled effects of urbanization and sediment-TOC. Mean probable effect concentration quotients (PECQs) were significantly related to urbanization. Trace elements were the major contributors to mean PECQs at undeveloped sites, whereas organic contaminants, especially bifenthrin, were the major contributors at highly urban sites. Pyrethroids, where detected, accounted for the largest share of the mean PECQ. Part 2 of this series (Kemble et al. 2012) evaluates sediment toxicity to amphipods and midge in relation to sediment chemistry.

  16. RCRA Part A Permit Application for Waste Management Activities at the Nevada Test Site, Part B Permit Application Hazardous Waste Storage Unit, Nevada Test Site, and Part B Permit Application - Explosives Ordnance Disposal Unit (EODU)

    International Nuclear Information System (INIS)

    2010-01-01

    The Area 5 Hazardous Waste Storage Unit (HWSU) was established to support testing, research, and remediation activities at the Nevada Test Site (NTS), a large-quantity generator of hazardous waste. The HWSU, located adjacent to the Area 5 Radioactive Waste Management Site (RWMS), is a prefabricated, rigid steel-framed, roofed shelter used to store hazardous nonradioactive waste generated on the NTS. No offsite generated wastes are managed at the HWSU. Waste managed at the HWSU includes the following categories: Flammables/Combustibles; Acid Corrosives; Alkali Corrosives; Oxidizers/Reactives; Toxics/Poisons; and Other Regulated Materials (ORMs). A list of the regulated waste codes accepted for storage at the HWSU is provided in Section B.2. Hazardous wastes stored at the HWSU are stored in U.S. Department of Transportation (DOT) compliant containers, compatible with the stored waste. Waste transfer (between containers) is not allowed at the HWSU and containers remain closed at all times. Containers are stored on secondary containment pallets and the unit is inspected monthly. Table 1 provides the metric conversion factors used in this application. Table 2 provides a list of existing permits. Table 3 lists operational Resource Conservation and Recovery Act (RCRA) units at the NTS and their respective regulatory status.

  17. RCRA Part A Permit Application for Waste Management Activities at the Nevada Test Site, Part B Permit Application Hazardous Waste Storage Unit, Nevada Test Site, and Part B Permit Application - Explosives Ordnance Disposal Unit (EODU)

    Energy Technology Data Exchange (ETDEWEB)

    NSTec Environmental Programs

    2010-06-17

    The Area 5 Hazardous Waste Storage Unit (HWSU) was established to support testing, research, and remediation activities at the Nevada Test Site (NTS), a large-quantity generator of hazardous waste. The HWSU, located adjacent to the Area 5 Radioactive Waste Management Site (RWMS), is a prefabricated, rigid steel-framed, roofed shelter used to store hazardous nonradioactive waste generated on the NTS. No offsite generated wastes are managed at the HWSU. Waste managed at the HWSU includes the following categories: Flammables/Combustibles; Acid Corrosives; Alkali Corrosives; Oxidizers/Reactives; Toxics/Poisons; and Other Regulated Materials (ORMs). A list of the regulated waste codes accepted for storage at the HWSU is provided in Section B.2. Hazardous wastes stored at the HWSU are stored in U.S. Department of Transportation (DOT) compliant containers, compatible with the stored waste. Waste transfer (between containers) is not allowed at the HWSU and containers remain closed at all times. Containers are stored on secondary containment pallets and the unit is inspected monthly. Table 1 provides the metric conversion factors used in this application. Table 2 provides a list of existing permits. Table 3 lists operational Resource Conservation and Recovery Act (RCRA) units at the NTS and their respective regulatory status.

  18. Field Sampling Plan for Closure of the Central Facilities Area Sewage Treatment Plant Lagoon 3 and Land Application Area

    International Nuclear Information System (INIS)

    Lewis, Michael George

    2016-01-01

    This field sampling plan describes sampling of the soil/liner of Lagoon 3 at the Central Facilities Area Sewage Treatment Plant. The lagoon is to be closed, and samples obtained from the soil/liner will provide information to determine if Lagoon 3 and the land application area can be closed in a manner that renders it safe to human health and the environment. Samples collected under this field sampling plan will be compared to Idaho National Laboratory background soil concentrations. If the concentrations of constituents of concern exceed the background level, they will be compared to Comprehensive Environmental Response, Compensation, and Liability Act preliminary remediation goals and Resource Conservation and Recovery Act levels. If the concentrations of constituents of concern are lower than the background levels, Resource Conservation and Recovery Act levels, or the preliminary remediation goals, then Lagoon 3 and the land application area will be closed. If the Resource Conservation and Recovery Act levels and/or the Comprehensive Environmental Response, Compensation, and Liability Act preliminary remediation goals are exceeded, additional sampling and action may be required.

  19. Field Sampling Plan for Closure of the Central Facilities Area Sewage Treatment Plant Lagoon 3 and Land Application Area

    Energy Technology Data Exchange (ETDEWEB)

    Lewis, Michael George [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2016-10-01

    This field sampling plan describes sampling of the soil/liner of Lagoon 3 at the Central Facilities Area Sewage Treatment Plant. The lagoon is to be closed, and samples obtained from the soil/liner will provide information to determine if Lagoon 3 and the land application area can be closed in a manner that renders it safe to human health and the environment. Samples collected under this field sampling plan will be compared to Idaho National Laboratory background soil concentrations. If the concentrations of constituents of concern exceed the background level, they will be compared to Comprehensive Environmental Response, Compensation, and Liability Act preliminary remediation goals and Resource Conservation and Recovery Act levels. If the concentrations of constituents of concern are lower than the background levels, Resource Conservation and Recovery Act levels, or the preliminary remediation goals, then Lagoon 3 and the land application area will be closed. If the Resource Conservation and Recovery Act levels and/or the Comprehensive Environmental Response, Compensation, and Liability Act preliminary remediation goals are exceeded, additional sampling and action may be required.

  20. High Voltage EEE Parts for EMA/EHA Applications on Manned Launch Vehicles

    Science.gov (United States)

    Griffin, Trent; Young, David

    2011-01-01

    The objective of this paper is an assessment of high voltage electronic components required for high horsepower electric thrust vector control (TVC) systems for human spaceflight launch critical application. The scope consists of creating of a database of available Grade 1 electrical, electronic and electromechanical (EEE) parts suited to this application, a qualification path for potential non-Grade 1 EEE parts that could be used in these designs, and pathfinder testing to validate aspects of the proposed qualification plan. Advances in the state of the art in high power electric power systems enable high horsepower electric actuators, such as the electromechnical actuator (EMA) and the electro-hydrostatic actuator (EHA), to be used in launch vehicle TVC systems, dramaticly reducing weight, complexity and operating costs. Designs typically use high voltage insulated gate bipolar transistors (HV-IGBT). However, no Grade 1 HV-IGBT exists and it is unlikely that market factors alone will produce such high quality parts. Furthermore, the perception of risk, the lack of qualification methodoloy, the absence of manned space flight heritage and other barriers impede the adoption of commercial grade parts onto the critical path. The method of approach is to identify high voltage electronic component types and key parameters for parts currently used in high horsepower EMA/EHA applications, to search for higher quality substitutes and custom manufacturers, to create a database for these parts, and then to explore ways to qualify these parts for use in human spaceflight launch critical application, including grossly derating and possibly treating hybrid parts as modules. This effort is ongoing, but results thus far include identification of over 60 HV-IGBT from four manufacturers, including some with a high reliability process flow. Voltage ranges for HV-IGBT have been identified, as has screening tests used to characterize HV-IGBT. BSI BS ISO 21350 Space systems Off

  1. Uncertainty analysis of an interfacial area reconstruction algorithm and its application to two group interfacial area transport equation validation

    International Nuclear Information System (INIS)

    Dave, A.J.; Manera, A.; Beyer, M.; Lucas, D.; Prasser, H.-M.

    2016-01-01

    Wire mesh sensors (WMS) are state of the art devices that allow high resolution (in space and time) measurement of 2D void fraction distribution over a wide range of two-phase flow regimes, from bubbly to annular. Data using WMS have been recorded at the Helmholtz-Zentrum Dresden-Rossendorf (HZDR) (Lucas et al., 2010; Beyer et al., 2008; Prasser et al., 2003) for a wide combination of superficial gas and liquid velocities, providing an excellent database for advances in two-phase flow modeling. In two-phase flow, the interfacial area plays an integral role in coupling the mass, momentum and energy transport equations of the liquid and gas phase. While current models used in best-estimate thermal-hydraulic codes (e.g. RELAP5, TRACE, TRACG, etc.) are still based on algebraic correlations for the estimation of the interfacial area in different flow regimes, interfacial area transport equations (IATE) have been proposed to predict the dynamic propagation in space and time of interfacial area (Ishii and Hibiki, 2010). IATE models are still under development and the HZDR WMS experimental data provide an excellent basis for the validation and further advance of these models. The current paper is focused on the uncertainty analysis of algorithms used to reconstruct interfacial area densities from the void-fraction voxel data measured using WMS and their application towards validation efforts of two-group IATE models. In previous research efforts, a surface triangularization algorithm has been developed in order to estimate the surface area of individual bubbles recorded with the WMS, and estimate the interfacial area in the given flow condition. In the present paper, synthetically generated bubbles are used to assess the algorithm’s accuracy. As the interfacial area of the synthetic bubbles are defined by user inputs, the error introduced by the algorithm can be quantitatively obtained. The accuracy of interfacial area measurements is characterized for different bubbles

  2. Uncertainty analysis of an interfacial area reconstruction algorithm and its application to two group interfacial area transport equation validation

    Energy Technology Data Exchange (ETDEWEB)

    Dave, A.J., E-mail: akshayjd@umich.edu [Department of Nuclear Engineering and Rad. Sciences, University of Michigan, Ann Arbor, MI 48105 (United States); Manera, A. [Department of Nuclear Engineering and Rad. Sciences, University of Michigan, Ann Arbor, MI 48105 (United States); Beyer, M.; Lucas, D. [Helmholtz-Zentrum Dresden-Rossendorf, Institute of Fluid Dynamics, 01314 Dresden (Germany); Prasser, H.-M. [Department of Mechanical and Process Engineering, ETH Zurich, 8092 Zurich (Switzerland)

    2016-12-15

    Wire mesh sensors (WMS) are state of the art devices that allow high resolution (in space and time) measurement of 2D void fraction distribution over a wide range of two-phase flow regimes, from bubbly to annular. Data using WMS have been recorded at the Helmholtz-Zentrum Dresden-Rossendorf (HZDR) (Lucas et al., 2010; Beyer et al., 2008; Prasser et al., 2003) for a wide combination of superficial gas and liquid velocities, providing an excellent database for advances in two-phase flow modeling. In two-phase flow, the interfacial area plays an integral role in coupling the mass, momentum and energy transport equations of the liquid and gas phase. While current models used in best-estimate thermal-hydraulic codes (e.g. RELAP5, TRACE, TRACG, etc.) are still based on algebraic correlations for the estimation of the interfacial area in different flow regimes, interfacial area transport equations (IATE) have been proposed to predict the dynamic propagation in space and time of interfacial area (Ishii and Hibiki, 2010). IATE models are still under development and the HZDR WMS experimental data provide an excellent basis for the validation and further advance of these models. The current paper is focused on the uncertainty analysis of algorithms used to reconstruct interfacial area densities from the void-fraction voxel data measured using WMS and their application towards validation efforts of two-group IATE models. In previous research efforts, a surface triangularization algorithm has been developed in order to estimate the surface area of individual bubbles recorded with the WMS, and estimate the interfacial area in the given flow condition. In the present paper, synthetically generated bubbles are used to assess the algorithm’s accuracy. As the interfacial area of the synthetic bubbles are defined by user inputs, the error introduced by the algorithm can be quantitatively obtained. The accuracy of interfacial area measurements is characterized for different bubbles

  3. Biomedical applications of yeast- a patent view, part one: yeasts as workhorses for the production of therapeutics and vaccines.

    Science.gov (United States)

    Roohvand, Farzin; Shokri, Mehdi; Abdollahpour-Alitappeh, Meghdad; Ehsani, Parastoo

    2017-08-01

    Yeasts, as Eukaryotes, offer unique features for ease of growth and genetic manipulation possibilities, making it an exceptional microbial host. Areas covered: This review provides general and patent-oriented insights into production of biopharmaceuticals by yeasts. Patents, wherever possible, were correlated to the original or review articles. The review describes applications of major GRAS (generally regarded as safe) yeasts for the production of therapeutic proteins and subunit vaccines; additionally, immunomodulatory properties of yeast cell wall components were reviewed for use of whole yeast cells as a new vaccine platform. The second part of the review will discuss yeast- humanization strategies and innovative applications. Expert opinion: Biomedical applications of yeasts were initiated by utilization of Saccharomyces cerevisiae, for production of leavened (fermented) products, and advanced to serve to produce biopharmaceuticals. Higher biomass production and expression/secretion yields, more similarity of glycosylation patterns to mammals and possibility of host-improvement strategies through application of synthetic biology might enhance selection of Pichia pastoris (instead of S. cerevisiae) as a host for production of biopharmaceutical in future. Immunomodulatory properties of yeast cell wall β-glucans and possibility of intracellular expression of heterologous pathogen/tumor antigens in yeast cells have expanded their application as a new platform, 'Whole Yeast Vaccines'.

  4. Distribution of 127Cs and 90Sr in southern part of Pyajyanne lake and in its catchment area

    International Nuclear Information System (INIS)

    Saksen, R.; Rantavaara, A.; Yaakkola, T.

    1998-01-01

    Slight increase in 90 Sr content from river discharges was observed in the near-the-surface layers og the Asikkalanselk bay of the Pyajanne lake in the years directly following the Chernobyl accident; later it remained almost runchanged, whereas 137 Cs concentration is decreasing. 90 Sr was identified in the bottoms at greater depth than 137 Cs. Radionuclides transport by small rivers from water catchment zones to Asikkalanselsk was studied in 1995-1997. It is established that greater part of 137 Cs is leached into the surface waters from swamped areas. The swamped soils are also characterized by higher degree of 90 Sr washing out. The role of 137 Cs and 90 Sr surface discharges from catchment as compared to radionuclide exchange with other parts of the lake, containing greater water volumes

  5. The applicability of Relative Floristic Resemblance to evaluate the conservation value of protected areas.

    NARCIS (Netherlands)

    Wieringa, J.J.; Sosef, M.S.M.

    2011-01-01

    s – It is important to know the contribution of a protected area to global conservation. A new method called ‘Relative Floristic Resemblance’ that uses databased and georeferenced herbarium specimens, is introduced. Its usefulness and applicability to assess the conservation value of protected areas

  6. Ocean model system for radionuclides - validation and application to the Rokkasho coastal area

    International Nuclear Information System (INIS)

    Kobayashi, Takuya

    2010-01-01

    Coastal areas have complex environmental systems and often a high influence from the atmosphere, rivers and the open sea. A nuclear fuel reprocessing plant in Japan releases liquid radioactive waste from a discharge pipe to such a complex coastal area. Consequently, the development of radionuclide migration forecast system in the ocean plays an important rule for assessing the behavior of radionuclides in the coastal area. The development of ocean model systems will be presented and model application will also be described. (author)

  7. Geology and zircon fission track ages of volcanic rocks in the western part of Hoshino gold area, Fukuoka Prefecture, Japan

    Energy Technology Data Exchange (ETDEWEB)

    Belhadi, Ahmed; Himeno, Osamu; Watanabe, Koichiro; Izawa, Eiji [Kyushu Univ., Fukuoka (Japan). Faculty of Engineering

    1999-12-01

    The Hoshino gold area is located in the western part of the Hohi volcanic zone, northern Kyushu. Volcanic rocks in this area vary from andesitic rocks in the north to dacite and rhyolite in the South. The basement is constituted by metamorphic rocks of pre-Cretaceous age. The volcanic rocks of Pliocene age were subdivided into eight volcanic units. Seven fission track ages of zircons from five volcanic units have been determined, using the external detector method. The age data obtained, combined with some previously reported ages, show that two main volcanic activities have occurred in the area. The first volcanic activity took place around 4.3 Ma, and resulted into the deposition of the Hoshino Andesite and the Ikenoyama Conglomerate. The second main volcanism started around 3.5 Ma, and was characterized by the eruption of the Shakadake Andesite and the Reiganji Andesite at the early stage, then, by more acidic rocks of the Takeyama Andesite, the Hyugami Dacite and the Kuroki Rhyolite at the later stage. The main volcanism in the area ceased around 2.6 Ma. (author)

  8. Mapping of risk prone areas of kala-azar (Visceral leishmaniasis) in parts of Bihar State, India: an RS and GIS approach.

    Science.gov (United States)

    Sudhakar, S; Srinivas, T; Palit, A; Kar, S K; Battacharya, S K

    2006-09-01

    The kala-azar fever (Visceral leishmaniasis) is continuing unabated in India for over a century, now being largely confined to the eastern part of India mainly in Bihar state and to some extent in its bordering states like West Bengal and Uttar Pradesh. Two study sites namely Patepur block in Vaishali district with high endemicity in northern part and Lohardagga block in Lohardagga district with absolute non-endemicity in southern part of Bihar were selected for the study with the following objectives : (i) to study the macro-ecosystem in relation to distribution of vector -Phlebotomus argentipes; (ii) to identify/map the risk prone areas or villages in a block for quick remedial measures; and (iii) to make use of satellite remote sensing and GIS to demonstrate the utility for rapid assessment of landuse/landcover and their relation with the incidence of kalaazar leading to the mapping of risk prone areas. Indian Remote Sensing (IRS)-1D LISS III satellite data for the periods of March and November 2000 were analysed in Silicon graphic image processing system using ERDAS software. False color composites (FCC) were generated and landuse/landcover was assessed using Maximum likelihood supervised classification techniques based on ground truth training sets. During the study the GIS functions are used to quantify the remotely sensed landscape proportions of 5 km2 buffer surrounding each known group of villages of high occurrence of sandflies in endemic and nonendemic study sites. Instead of traditional ground based survey methods to vector surveillance, the present study used a combination of remote sensing (RS) and geographical information system (GIS) approach to develop landscape predictors of sandfly abundance-an indicator of human vector contact and as a measure of risk prone areas. Statistical analysis using the remotely sensed landscape variables showed that rural villages surrounded by higher proportion of transitional swamps with soft stemmed edible plants and

  9. Application of artificial intelligence (AI) concepts to the development of space flight parts approval model

    Science.gov (United States)

    Krishnan, Govindarajapuram Subramaniam

    1997-12-01

    The National Aeronautics & Space Administration (NASA), the European Space Agency (ESA), and the Canadian Space Agency (CSA) missions involve the performance of scientific experiments in Space. Instruments used in such experiments are fabricated using electronic parts such as microcircuits, inductors, capacitors, diodes, transistors, etc. For instruments to perform reliably the selection of commercial parts must be monitored and strictly controlled. The process used to achieve this goal is by a manual review and approval of every part used to build the instrument. The present system to select and approve parts for space applications is manual, inefficient, inconsistent, slow and tedious, and very costly. In this dissertation a computer based decision support model is developed for implementing this process using artificial intelligence concepts based on the current information (expert sources). Such a model would result in a greater consistency, accuracy, and timeliness of evaluation. This study presents the methodology of development and features of the model, and the analysis of the data pertaining to the performance of the model in the field. The model was evaluated for three different part types by experts from three different space agencies. The results show that the model was more consistent than the manual evaluation for all part types considered. The study concludes with the cost and benefits analysis of implementing the models and shows that implementation of the model will result in significant cost savings. Other implementation details are highlighted.

  10. Transferring diffractive optics from research to commercial applications: Part II - size estimations for selected markets

    Science.gov (United States)

    Brunner, Robert

    2014-04-01

    In a series of two contributions, decisive business-related aspects of the current process status to transfer research results on diffractive optical elements (DOEs) into commercial solutions are discussed. In part I, the focus was on the patent landscape. Here, in part II, market estimations concerning DOEs for selected applications are presented, comprising classical spectroscopic gratings, security features on banknotes, DOEs for high-end applications, e.g., for the semiconductor manufacturing market and diffractive intra-ocular lenses. The derived market sizes are referred to the optical elements, itself, rather than to the enabled instruments. The estimated market volumes are mainly addressed to scientifically and technologically oriented optical engineers to serve as a rough classification of the commercial dimensions of DOEs in the different market segments and do not claim to be exhaustive.

  11. Research on the surface water quality in mining influenced area in north-western part of Romania

    Directory of Open Access Journals (Sweden)

    Smical Irina

    2015-01-01

    Full Text Available The paper highlights the current situation of the quality of surface water in the areas influenced by mining activities in the north-western part of Romania. In this respect a series of investigations have been conducted regarding the contamination with heavy metals of the water of the Someş and Tisa hydro- graphic Basins, which cover the northern part of Maramures County and the south-western area of Maramures County, respectively. The results of the comparative research refer to the period between 1999 and 2011 and reveal the specific heavy metal ions of mining activity: Fe, Mn, Zn, Cu, Pb Cd and Ni, as well as the water pH. The presented values as annual average values reveal an increase in several heavy metals after the closure of mines, which is due to the lack of effectiveness of the closure and of the conservation of the mine galleries, as well as of the impaired functioning of the mining wastewater treatment plants.

  12. Application of the aqueous coating suspension for the protection of Gas Turbine Engine parts from corrosion

    Directory of Open Access Journals (Sweden)

    E. G. Ivanov

    2015-01-01

    Full Text Available The article considers the physical nature of receiving diffusion coatings from aqueous suspensions of various alloys for various conditions and their further exploitation. Structure of coatings, advantages and features of the production of coatings from aqueous suspensions are shown. Based on the analysis of thermodynamic reactions in the systems of elements formulations of aqueous suspensions were developed and practical recommendations for their application to the parts of gas turbine engine were given.

  13. IMPORTANCE OF SHALLOW AREAS OF THE UPPER PART OF THE KANIV RESERVOIR IN THE MAINTENANCE OF ITS ICHTHYOFAUNA

    Directory of Open Access Journals (Sweden)

    O. Gurbyk

    2014-09-01

    Full Text Available Purpose. Determination of the relative number of fish juveniles on biotopes of the upper part of the Kanev reservoir in the aspect of evaluation of these areas in general propagation of ichthyofauna. Methodology. The work is based on data of fish juvenile surveys conducted in the Kaniv reservoir during 2011—2013. Data collection and processing were performed according to generally accepted methods. Fish juveniles were caught using a beach seine made of mill gauze № 7, length 10 m, height 1 m. Relative number of fish juveniles on different sites has been calculated based on the areas of fish nursing biotopes under assumption of the constancy of catchability coefficients. Shannon-Weaver diversity index was used for comparing species diversity of the commercial ichthyofauna of different sites. Findings. The majority of the studied littoral sites of the upper part of the Kaniv reservoir were characterized by sufficiently high indices of biodiversity ― Shannon index values varied within 2,07—3,24 bit./ind. Twenty six species were recorded in the composition of the fish juvenile communities that was 80 % of total number of species in the reservoir. It was found that despite a decrease of the relative number of the juveniles of valuable commercial species compared to previous years, the upper part of the reservoir remains the major site for recruitment of commercial fish stock ― 70 % of bream (Abramis brama, tench (Tinca tinca, pike (Esox lucius, roach (Rutilus rutilus and wels (Vimba vimba of the Kaniv reservoir are reproduced here. Taking into account the especial value of the upper part in formation of the spawning fund of the reservoir, any hydroenhancement works here should be limited exclusively by navigable channel. Originality. For the first time we quantitatively evaluated (in spatial aspect the number of fish fauna recruitment in the Kanev reservoir under current state of spawning areas. Practical value. Results of the work will be

  14. A review of breast tomosynthesis. Part II. Image reconstruction, processing and analysis, and advanced applications

    Science.gov (United States)

    Sechopoulos, Ioannis

    2013-01-01

    Many important post-acquisition aspects of breast tomosynthesis imaging can impact its clinical performance. Chief among them is the reconstruction algorithm that generates the representation of the three-dimensional breast volume from the acquired projections. But even after reconstruction, additional processes, such as artifact reduction algorithms, computer aided detection and diagnosis, among others, can also impact the performance of breast tomosynthesis in the clinical realm. In this two part paper, a review of breast tomosynthesis research is performed, with an emphasis on its medical physics aspects. In the companion paper, the first part of this review, the research performed relevant to the image acquisition process is examined. This second part will review the research on the post-acquisition aspects, including reconstruction, image processing, and analysis, as well as the advanced applications being investigated for breast tomosynthesis. PMID:23298127

  15. Theses in the area of nanotechnologies and nanomaterials: novelties and practical application. Part 2

    Directory of Open Access Journals (Sweden)

    KARPOV Alexey Ivanovich

    2016-04-01

    Full Text Available To popularize scientific achievements the main results of Russian and foreign scientists’ research are published in the form of abstract. The authors of the research «Fine-grained basalt fiber concrete with nanosilica» showed that joint introduction of silica and basalt fiber additives into fiber concrete enhances freeze resistance of the concrete from F150 to F200-250. The increase of freeze resistance in addition to damping effect is due to considerable decrease of destructive impact of osmotic pressure of hardening concrete. As a result the number of microcracks and interconnected pores in concrete is minimal. The change of fiber concrete microstrcuture when joint introduction of nanosilica and basalt fiber additives is performed results in water absorption decrease in concrete. The composition of basalt fiber concrete with nanosilica «Tarkosil-05» demonstrated the best parameters: rise of compressive strength by 35%, bending strength – 65% respect to control composition without additives. The concretes with nanosilica are characterized by high performance properties that proves the creation of dense material structure when nanosilica is introduced and hardening effect of it. The specialists may be also interested in the following research: «Fibro foam concrete based on nanostructured binder», «Increase of concrete strength with carbon nanotubes with hydrodynamic cavitation», «Production of impermeable fibroconcrete based on composite binder», «Production and research of physical and chemical properties of composite sorbents based on polystyrene matrices with nanodispersed ferric oxides», «Polystyrene suspensions containing nanoparticles of metal oxides», «Efficient cement compositions modified with carbon materials», «Research of magnetic dynamics of groups of nanoparticles in environment with the Mössbauer spectroscopy», «Particular features of formation of new quasi-twodimensional nanostructures and their properties», «Study of optical and oscillating properties of carbon nanostructures», «Heat-resistant and flame-retardant fibroreinforced composites with implementation of volcanic rocks», «Development of polymer composite materials based on epoxy binder and functional carbon nanotubes», «Multifunctional composite materials based on polypropylene and nanocarbon fillers obtained by polymerization IN SITU», etc.

  16. Inductively coupled plasma emission spectroscopy. Part II: applications and fundamentals. Volume 2

    International Nuclear Information System (INIS)

    Boumans, P.W.J.M.

    1987-01-01

    This is the second part of the two-volume treatise by this well-known and respected author. This volume reviews applications of inductively coupled plasma atomic emission spectroscopy (ICP-AES), summarizes fundamental studies, and compares ICP-AES methods with other methods of analysis. The first six chapters are devoted to specific fields of application, including the following: metals and other industrial materials, geology, the environment, agriculture and food, biology and clinical analysis, and organic materials. The chapter on the analysis of organic materials also covers the special instrumental considerations required when organic solvents are introduced into an inductively coupled plasma. A chapter on the direct analysis of solids completes the first part of this volume. Each of the applications chapters begins with a summary of the types of samples that are encountered in that field, and the kinds of problems that an elemental analysis can help to solve. This is followed by a tutorial approach covering applicability, advantages, and limitations of the methods. The coverage is thorough, including sample handling, storage, and preparation, acid, and fusion dissolution, avoiding contamination, methods of preconcentration, the types of interferences that can be expected and ways to reduce them, and the types of ICP plasmas that are used. The second half of the volume covers fundamental studies of ICP-AES: basic processes of aerosol generation, plasma modeling and computer simulation, spectroscopic diagnostics, excitation mechanisms, and discharge characteristics. This section introduces the experimental and modeling methods that have been used to obtain fundamental information about ICPs

  17. The Analysis of Land Use Based on CORINE Land Cover in the Romanian Part of the Tisa Catchment Area

    Directory of Open Access Journals (Sweden)

    CIPRIAN MOLDOVAN

    2010-01-01

    Full Text Available The analysis of the land use structure of the 13 counties of the Romanian part of Tisa catchment area has been made according to the 2000 edition of CORINE Land Cover, while the 1990 edition has been used for comparative purposes. Out of the total area of 8,269,229.48 hectares, the forests cover 37.92%, the arable lands 35.02% and the grasslands 17.97%. The other types of land use have lower weights, such as the continuous and discontinuous urban fabric 4.81%, the orchards 1.10% and the vineyards 0.98%. In the category of forests, the following types of land use are included: broad-leaved forests, which form the majority (24.72%, coniferous forests (6.22%, mixed forests (3.46% and transitional woodland-shrub areas (3.52%. The forests are mainly located in the Carpathians and the hills. The non-irrigated arable lands (23.50% are predominant within the arable lands. They lie mostly in the Western Plain and in the basins and corridors of the Transylvanian Depression and the Western Hills. The analysis of the dynamics of the land use structure between 1990 and 2000 indicates a relative stability in the case of forests, a decrease of arable lands and an increase of grasslands.

  18. 20 CFR 726.103 - Application for authority to self-insure; effect of regulations contained in this part.

    Science.gov (United States)

    2010-04-01

    ... § 726.103 Application for authority to self-insure; effect of regulations contained in this part. As... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Application for authority to self-insure; effect of regulations contained in this part. 726.103 Section 726.103 Employees' Benefits EMPLOYMENT...

  19. Recycled Water Reuse Permit Renewal Application for the Central Facilities Area Sewage Treatment Plant

    Energy Technology Data Exchange (ETDEWEB)

    Lewis, Mike [Idaho National Lab. (INL), Idaho Falls, ID (United States)

    2014-09-01

    This renewal application for a Recycled Water Reuse Permit is being submitted in accordance with the Idaho Administrative Procedures Act 58.01.17 “Recycled Water Rules” and the Municipal Wastewater Reuse Permit LA-000141-03 for continuing the operation of the Central Facilities Area Sewage Treatment Plant located at the Idaho National Laboratory. The permit expires March 16, 2015. The permit requires a renewal application to be submitted six months prior to the expiration date of the existing permit. For the Central Facilities Area Sewage Treatment Plant, the renewal application must be submitted by September 16, 2014. The information in this application is consistent with the Idaho Department of Environmental Quality’s Guidance for Reclamation and Reuse of Municipal and Industrial Wastewater and discussions with Idaho Department of Environmental Quality personnel.

  20. Application of electrical resistivity method for groundwater exploration at the Moghra area, Western Desert, Egypt

    Directory of Open Access Journals (Sweden)

    M.I.I. Mohamaden

    2016-09-01

    Structurally, the study area is influenced by three faults two of them are geological/geoelectrical faults forming a graben structure at the central part; the third fault is a geoelectrical fault and is located to the west of the graben structure forming a horest structure.

  1. Advanced Control of Wind Electric Pumping System for Isolated Areas Application

    OpenAIRE

    Mohamed Barara; Abderrahim Bennassar; Ahmed Abbou; Mohammed Akherraz; Badre Bossoufi

    2014-01-01

    The supply water in remote areas of windy region is one of most attractive application of wind energy conversion .This paper proposes an advanced controller suitable for wind-electric pump in isolated applications in order to have a desired debit from variation of reference speed of the pump also the control scheme of DC voltage of SIEG for feed the pump are presented under step change in wind speed. The simulation results showed a good performance of the global proposed control system.

  2. Comparative analysis of the application of different Low Power Wide Area Network technologies in power grid

    Science.gov (United States)

    Wang, Hao; Sui, Hong; Liao, Xing; Li, Junhao

    2018-03-01

    Low Power Wide Area Network (LPWAN) technologies developed rapidly in recent years, but the application principle of different LPWAN technologies in power grid is still not clear. This paper gives a comparative analysis of two mainstream LPWAN technologies including NB-IoT and LoRa, and gives an application suggestion of these two LPWAN technologies, which can guide the planning and construction of LPWAN in power grid.

  3. FARM LEVEL DYNAMIC ANALYSIS OF SOIL CONSERVATION: AN APPLICATION TO THE PIEDMONT AREA OF VIRGINIA

    OpenAIRE

    Segarra, Eduardo; Taylor, Daniel B.

    1987-01-01

    A conceptual optimal control theory model which considers farm level decision making with respect to soil management is developed. A simplified version of the theoretical model is applied to the Piedmont area of Virginia. The model includes the productivity impacts of both soil erosion and technological progress. Both the theoretical model and its empirical application are improvements over previous efforts. Results suggest that farmers in the study area can achieve substantial reductions in ...

  4. Application of thermoluminescence dating on pressed crystalline samples to determine the geological age at some areas in Eastern South, Vietnam

    International Nuclear Information System (INIS)

    Do Duy Khiem; Luu Anh Tuyen; Phan Trong Phuc; Nguyen Thi Ngoc Hue; Pham Thi Hue; La Ly Nguyen; Ha Quang Hai

    2016-01-01

    The terrestrial part of eastern margin of the Mekong Basin is formed by outcrop of the pre-Holocen Cenozoic sequence. Almost previous studies concerned in using relative methods in geologic dating at the Mekong Basin, therefore, the ages of its stratigraphy are still unclear. The thermoluminescence (TL) dating was considered as one of the precise methods in geologic dating. In our study, we used TL dating for some areas at Eastern South, Vietnam including Ba Mieu Formation and the Thu Duc Formation at some areas in Dong Nai province and Ho Chi Minh City. This work has been the first application of TL for in geologic dating by a domestic laboratory. Experimental measurements of TL were performed using pressed crystalline quartz specimens from sediment samples. The results show that the Ba Mieu Formation was deposited about 238±22 ka and the Thu Duc Formation was deposited about 199±21 ka. (author)

  5. Ground penetrating radar measurements at the ONKALO research tunnel and eastern part of the Olkiluoto investigation area at July 2006

    International Nuclear Information System (INIS)

    Sipola, V.; Tarvainen, A.-M.

    2007-04-01

    Ground Penetrating Radar (GPR) measurements were carried out at ONKALO research site in summer 2006. Measurements included 400 metres of measurements inside ONKALO access tunnel and about 1800 metres of measurements on the ground, at the eastern parts of Olkiluoto investigation area. The purpose of the measurements done inside the access tunnel was to investigate, whether it would be possible to locate deformation structures or long fractures in the rock mass below the tunnel. The purpose of the measurements made on top of the ground was to investigate, whether it would be possible to locate glacio-isostatic faults from the soils. A secondary target was to try and locate the rock surface. The chosen part of ONKALO tunnel was measured using five different frequencies, which enabled comparing the results to each other. It also enabled getting a higher resolution picture of the top rock, than what would have been possible using only one low-frequency antenna. The on-the-ground measurements were measured using only one frequency. (orig.)

  6. Application of the 137Cs determination to evaluate the erosion rates in cultivated soils in the west part of Cuba

    International Nuclear Information System (INIS)

    Gil Castillo, Reinaldo; Peralta Vital, Jose Luis; Carrazana Gonzalez, Jorge; Riverol Rosquet, Mario; Penna Valenti, Fermin; Cabrera Calcedo, Eduardo

    2004-01-01

    The paper shows the experience in the application of 137Cs technique to estimate the erosion rates in cultivated soils (Ultisol) in the west part of the country, and the validation of the technique results by comparison against the results from traditional methods (watershed segments). The proportional, the simplified balance of mass and the balance of mass models were used to calculate the erosion rates, for three segments. In the evaluated area, have been obtained erosion rates from 3.5 to 7.1 t/ha/y for the segment I, from 5.17 to 10.3 t/ha/y for the segment III and from 2.3 to 17 t/ha/y for the segment IX. The conclusions are, the 137Cs technique is reliable for the estimation of erosion rates in the evaluated soil and the mass balance model obtained the nearest values to the estimated by watershed segments

  7. Study on Applicability of 10 CFR Part 21 to APR1400 DC Project

    International Nuclear Information System (INIS)

    Shin, He Young; Lee, Do Hwan; Lim, Jae Yong

    2014-01-01

    The tools such as NCR (non conformance report), CAR (corrective action request) and CAP (corrective action program) are widely used for that purpose based upon the rule of 10 CFR Part 50 Appendix B and the ASME Code NQA-1 requirements. These are the tools for a utility, as a purchaser taking over related basic components and services, to ensure strong quality assurance. During the conduct of the project for the acquisition of the standard design certification for APR1400 nuclear power plants from the U. S. NRC (APR1400 DC Project), a new CAP procedure that is appropriate to conduct this unique project was developed. However, it was also recommended to comply with the requirements under 10 CFR Part 21 which enhances nuclear safety quality assurances. Consequently, a new QA procedure is developed in order to deal with the 10 CFR Part 21 issues and this is integrated to the CAP procedure In this paper, the current corrective action program for the APR1400 DC project is introduced and the result of the study on the applicability of 10 CFR Part 21 to the project is indicated. In addition, further improving aspects to be considered are identified. As a frontier project to obtain the standard design certification for APR 1400 model from the U. S. NRC, a modified CAP procedure is developed and enhanced to deal with safety concerning issues in accordance with 10 CFR Part 21. In addition, the newly established QA procedure to directly control the reportability on 10 CFR Part 21 is interfaced into the existing CAP procedure

  8. Characterization of soils in terms of pedological variability under different physiography of Damodar command area (part, West Bengal, India

    Directory of Open Access Journals (Sweden)

    Ranjan Bera

    2015-12-01

    Full Text Available Five representative soil profiles occurring on four different physiography under subtropical environment of Damodar command area, India, were studied for soil pedological variability. Two way approaches were taken to evaluate the extent of profile development. Firstly different extractants were used to determine various forms of Fe and Al and their different ratios. Average contents of Fe and Al, extracted by different extracting reagents were found to be in descending order, as follows: Aldith > Aloxa > Alpyr and Fedith > Feoxa > Fepyr. Analysis of pyrophosphate (pyr, oxalate (oxa, and dithionate (dith extractable Fe and Al fractions indicated that with increasing soil age, the content of crystalline Fe and Al oxides increased at the expense of the poorly crystalline forms. The mean content of amorphous Fe and Al, crystalline Fe and Al, and their ratios estimated the degree of soil development. In the second part, elemental analysis was done, silica to sesquioxide ratio as well as ratio of alkali cations was measured and weathering index of each horizon was determined. The ratios and weathering indices indicated that except Madhpur soil series, all other soils were young and pedological development was still in progress in Damodar command area.

  9. Tunable, Flexible and Efficient Optimization of Control Pulses for Superconducting Qubits, part II - Applications

    Science.gov (United States)

    AsséMat, Elie; Machnes, Shai; Tannor, David; Wilhelm-Mauch, Frank

    In part I, we presented the theoretic foundations of the GOAT algorithm for the optimal control of quantum systems. Here in part II, we focus on several applications of GOAT to superconducting qubits architecture. First, we consider a control-Z gate on Xmons qubits with an Erf parametrization of the optimal pulse. We show that a fast and accurate gate can be obtained with only 16 parameters, as compared to hundreds of parameters required in other algorithms. We present numerical evidences that such parametrization should allow an efficient in-situ calibration of the pulse. Next, we consider the flux-tunable coupler by IBM. We show optimization can be carried out in a more realistic model of the system than was employed in the original study, which is expected to further simplify the calibration process. Moreover, GOAT reduced the complexity of the optimal pulse to only 6 Fourier components, composed with analytic wrappers.

  10. The Bloch wave operator: generalizations and applications: Part I. The time-independent case

    CERN Document Server

    Killingbeck, J P

    2003-01-01

    This is part 1 of a two-part review on wave operator theory and methods. The basic theory of the time-independent wave operator is presented in terms of partitioned matrix theory for the benefit of general readers, with a discussion of the links between the matrix and projection operator approaches. The matrix approach is shown to lead to simple derivations of the wave operators and effective Hamiltonians of Loewdin, Bloch, Des Cloizeaux and Kato as well as to some associated variational forms. The principal approach used throughout stresses the solution of the nonlinear equation for the reduced wave operator, leading to the construction of the effective Hamiltonians of Bloch and of Des Cloizeaux. Several mathematical techniques which are useful in implementing this approach are explained, some of them being relatively little known in the area of wave operator calculations. The theoretical discussion is accompanied by several specimen numerical calculations which apply the described techniques to a selection ...

  11. Fundamentals and applications of neutron imaging. Applications part 5. Application of neutron imaging to fluid engineering-1

    International Nuclear Information System (INIS)

    Takenaka, Nobuyuki; Asano, Hitoshi; Umekawa, Hisashi; Matsubayashi, Masahito

    2007-01-01

    Characteristics of the neutron beam attenuation vary with elements constituting the object and it attenuates with hydrogen and a specific element greatly and penetrates most metal well. Normal liquid such as water, oil, the organic liquid includes a lot of hydrogen, and a neutron beam attenuates, but attenuation characteristics of the metal well used industrially such as iron, copper, aluminum are smaller than normal liquid. Because most machines are made of metal, and liquid behavior of the machine inside can be seen through neutron radiography, it is possible to be used as the X-rays of the machine. As an application of neutron radiography to the fluid engineering, fluid behavior in the metal pipe and container, especially two phase flow mingled with each phase of gas/liquid/solid, has been visible and measurable which is difficult to be performed by other methods, and in late years the industry use of neutron radiography attracts attention particularly. This serial course describes overviews of two-phase flow visualization and measurement and freezing/cooling machinery as the first example of recent application to the machinery. (T. Tanaka)

  12. Verification and validation as an integral part of the development of digital systems for nuclear applications

    International Nuclear Information System (INIS)

    Straker, E.A.; Thomas, N.C.

    1983-01-01

    The nuclear industry's current attitude toward verification and validation (V and V) is realized through the experiences gained to date. On the basis of these experiences, V and V can effectively be applied as an integral part of digital system development for nuclear electric power applications. An overview of a typical approach for integrating V and V with system development is presented. This approach represents a balance between V and V as applied in the aerospace industry and the standard practice commonly applied within the nuclear industry today

  13. A rare sugar xylitol. Part II: biotechnological production and future applications of xylitol.

    Science.gov (United States)

    Granström, Tom Birger; Izumori, Ken; Leisola, Matti

    2007-02-01

    Xylitol is the first rare sugar that has global markets. It has beneficial health properties and represents an alternative to current conventional sweeteners. Industrially, xylitol is produced by chemical hydrogenation of D-xylose into xylitol. The biotechnological method of producing xylitol by metabolically engineered yeasts, Saccharomyces cerevisiae or Candida, has been studied as an alternative to the chemical method. Due to the industrial scale of production, xylitol serves as an inexpensive starting material for the production of other rare sugars. The second part of this mini-review on xylitol will look more closely at the biotechnological production and future applications of the rare sugar, xylitol.

  14. Resistor mesh model of a spherical head: part 2: a review of applications to cortical mapping.

    Science.gov (United States)

    Chauveau, N; Morucci, J P; Franceries, X; Celsis, P; Rigaud, B

    2005-11-01

    A resistor mesh model (RMM) has been validated with reference to the analytical model by consideration of a set of four dipoles close to the cortex. The application of the RMM to scalp potential interpolation was detailed in Part 1. Using the RMM and the same four dipoles, the different methods of cortical mapping were compared and have shown the potentiality of this RMM for obtaining current and potential cortical distributions. The lead-field matrices are well-adapted tools, but the use of a square matrix of high dimension does not permit the inverse solution to be improved in the presence of noise, as a regularisation technique is necessary with noisy data. With the RMM, the transfer matrix and the cortical imaging technique proved to be easy to implement. Further development of the RMM will include application to more realistic head models with more accurate conductivities.

  15. Experimental investigation and numerical modeling of carbonation process in reinforced concrete structures Part II. Practical applications

    International Nuclear Information System (INIS)

    Saetta, Anna V.; Vitaliani, Renato V.

    2005-01-01

    The mathematical-numerical method developed by the authors to predict the corrosion initiation time of reinforced concrete structures due to carbonation process, recalled in Part I of this work, is here applied to some real cases. The final aim is to develop and test a practical method for determining the durability characteristics of existing buildings liable to carbonation, as well as estimating the corrosion initiation time of a building at the design stage. Two industrial sheds with different ages and located in different areas have been analyzed performing both experimental tests and numerical analyses. Finally, a case of carbonation-induced failure in a prestressed r.c. beam is presented

  16. Application of local area networks to accelerator control systems at the Stanford Linear Accelerator

    International Nuclear Information System (INIS)

    Fox, J.D.; Linstadt, E.; Melen, R.

    1983-03-01

    The history and current status of SLAC's SDLC networks for distributed accelerator control systems are discussed. These local area networks have been used for instrumentation and control of the linear accelerator. Network topologies, protocols, physical links, and logical interconnections are discussed for specific applications in distributed data acquisition and control system, computer networks and accelerator operations

  17. Flow analysis of water-powder mixtures: Application to specific surface area and shape factor

    NARCIS (Netherlands)

    Hunger, M.; Brouwers, H.J.H.

    2009-01-01

    This paper addresses the characterization of powder materials with respect to their application in concrete. Given that powders provide by far highest percentage of specific surface area in a concrete mix, their packing behavior and water demand is of vital interest for the design of concrete. They

  18. Flow analysis of water-powder mixtures : Application to specific surface area and shape factor

    NARCIS (Netherlands)

    Hunger, M.; Brouwers, H.J.H.

    2009-01-01

    This paper addresses the characterization of powder materials with respect to their application in concrete. Given that powders provide by far highest percentage of specific surface area in a concrete mix, their packing behavior and water demand is of vital interest for the design of concrete. They

  19. Modeling grain-size dependent bias in estimating forest area: a regional application

    Science.gov (United States)

    Daolan Zheng; Linda S. Heath; Mark J. Ducey

    2008-01-01

    A better understanding of scaling-up effects on estimating important landscape characteristics (e.g. forest percentage) is critical for improving ecological applications over large areas. This study illustrated effects of changing grain sizes on regional forest estimates in Minnesota, Wisconsin, and Michigan of the USA using 30-m land-cover maps (1992 and 2001)...

  20. Students’ understanding and application of the area under the curve concept in physics problems

    Directory of Open Access Journals (Sweden)

    Dong-Hai Nguyen

    2011-06-01

    Full Text Available This study investigates how students understand and apply the area under the curve concept and the integral-area relation in solving introductory physics problems. We interviewed 20 students in the first semester and 15 students from the same cohort in the second semester of a calculus-based physics course sequence on several problems involving the area under the curve concept. We found that only a few students could recognize that the concept of area under the curve was applicable in physics problems. Even when students could invoke the area under the curve concept, they did not necessarily understand the relationship between the process of accumulation and the area under a curve, so they failed to apply it to novel situations. We also found that when presented with several graphs, students had difficulty in selecting the graph such that the area under the graph corresponded to a given integral, although all of them could state that “the integral equaled the area under the curve.” The findings in this study are consistent with those in previous mathematics education research and research in physics education on students’ use of the area under the curve.

  1. The Application Study in Solar Energy Technology for Highway Service Area: A Case Study of West Lushan Highway Low-Carbon Service Area in China

    OpenAIRE

    Qin, Xiaochun; Shen, Yi; Shao, Shegang

    2015-01-01

    A lot of research works have been made concerning highway service area or solar technology and acquired great achievements. However, unfortunately, few works have been made combining the two topics together of highway service areas and solar energy saving to make a systemic research on solar technology application for highway service area. In this paper, taking West Lushan highway low-carbon service area in Jiangxi Province of China as the case study, the advantages, technical principles, and...

  2. Time-dependent earthquake hazard evaluation in seismogenic systems using mixed Markov Chains: An application to the Japan area

    Science.gov (United States)

    Herrera, C.; Nava, F. A.; Lomnitz, C.

    2006-08-01

    A previous work introduced a new method for seismic hazard evaluation in a system (a geographic area with distinct, but related seismogenic regions) based on modeling the transition probabilities of states (patterns of presence or absence of seismicity, with magnitude greater or equal to a threshold magnitude Mr, in the regions of the system, during a time interval Δt) as a Markov chain. Application of this direct method to the Japan area gave very good results. Given that the most important limitation of the direct method is the relative scarcity of large magnitude events, we decided to explore the possibility that seismicity with magnitude M ≥ Mmr contains information about the future occurrence of earthquakes with M ≥ Mmr > Mmr. This mixed Markov chain method estimates the probabilities of occurrence of a system state for M ≥ MMr on the basis of the observed state for M ≥ Mmr in the previous Δt. Application of the mixed method to the area of Japan gives better hazard estimations than the direct method; in particular for large earthquakes. As part of this study, the problem of performance evaluation of hazard estimation methods is addressed, leading to the use of grading functions.

  3. Area monitoring of ambient dose rates in parts of South-Western Nigeria using a GPS-integrated radiation survey meter

    International Nuclear Information System (INIS)

    Okeyode, I.C.; Rabiu, J.A.; Alatise, O.O.; Makinde, V.; Akinboro, F.G.; Mustapha, A.O.; Al-Azmi, D.

    2017-01-01

    A radiation monitoring system comprising a Geiger-Muller counter connected to a smart phone via Bluetooth was used for a dose rate survey in some parts of south-western Nigeria. The smart phone has the Geographical Positioning System, which provides the navigation information and saves it along with the dose rate data. A large number of data points was obtained that shows the dose rate distribution within the region. The results show that the ambient dose rates in the region range from 60 to 520 nSv -1 and showed a bias that is attributable to the influence of geology on the ambient radiation dose in the region. The geology influence was demonstrated by superimposing the dose rate plot and the geological map of the area. The potential applications of the device in determining baseline information and in area monitoring, e.g. for lost or abandoned sources, radioactive materials stockpiles, etc., were discussed in the article, particularly against the background of Nigeria's plan to develop its nuclear power program. (authors)

  4. Special issue on electron cyclotron wave physics, technology, and applications - Part 2

    International Nuclear Information System (INIS)

    Uckan, Nermin A.

    2008-01-01

    This issue of Fusion Science and Technology (FS and T) contains a compendium of full-length, peer-reviewed papers on electron cyclotron (EC) wave physics, technology, and applications on magnetically confined plasmas. The interest in this special issue started with a simple question from a single individual who asked if he could submit for publication in FS and T his paper ''ITER ECH Front Steering Upper Launcher,'' parts of which he was planning to present at the 14th Joint Workshop on Electron Cyclotron Emission and Electron Cyclotron Resonance Heating, Santorini Island, Greece, May 2006. Such interest quickly grew, and the decision was made to offer the same opportunity to other workshop participants as well as to other interested researchers from around the world to contribute to a special FS and T issue on EC wave physics, technology, and applications. The person who started this ''wave'' of interest is no other than Dr. Mark Henderson, who was later drafted and kindly agreed to serve as the guest editor for this issue. The worldwide research program on EC wave physics, technology, and applications has shown impressive progress over the past couple of years, and much of this progress is reflected in the fifty or so papers that are included in this two-part special issue - part 1 in August 2007 and part 2 in January 2008. To complement the contributed papers, several informative reviews, which will be valuable for years to come, were also invited and are included. These review papers provide an objective summary of the current state of the art in EC emission research, theory of EC waves, EC heating and current drive experiments, gyrotron development, launcher development, and transmission systems. In preparation for ITER, this special issue is timely and should be of interest to those already working in the field and to the new generation of scientists and engineers who will be the ones to design, build, and carry out experiments on ITER. We extend our

  5. Discussion about the use of the volume specific surface area (VSSA) as a criterion to identify nanomaterials according to the EU definition. Part two: experimental approach.

    Science.gov (United States)

    Lecloux, André J; Atluri, Rambabu; Kolen'ko, Yury V; Deepak, Francis Leonard

    2017-10-12

    The first part of this study was dedicated to the modelling of the influence of particle shape, porosity and particle size distribution on the volume specific surface area (VSSA) values in order to check the applicability of this concept to the identification of nanomaterials according to the European Commission Recommendation. In this second part, experimental VSSA values are obtained for various samples from nitrogen adsorption isotherms and these values were used as a screening tool to identify and classify nanomaterials. These identification results are compared to the identification based on the 50% of particles with a size below 100 nm criterion applied to the experimental particle size distributions obtained by analysis of electron microscopy images on the same materials. It is concluded that the experimental VSSA values are able to identify nanomaterials, without false negative identification, if they have a mono-modal particle size, if the adsorption data cover the relative pressure range from 0.001 to 0.65 and if a simple, qualitative image of the particles by transmission or scanning electron microscopy is available to define their shape. The experimental conditions to obtain reliable adsorption data as well as the way to analyze the adsorption isotherms are described and discussed in some detail in order to help the reader in using the experimental VSSA criterion. To obtain the experimental VSSA values, the BET surface area can be used for non-porous particles, but for porous, nanostructured or coated nanoparticles, only the external surface of the particles, obtained by a modified t-plot approach, should be considered to determine the experimental VSSA and to avoid false positive identification of nanomaterials, only the external surface area being related to the particle size. Finally, the availability of experimental VSSA values together with particle size distributions obtained by electron microscopy gave the opportunity to check the

  6. Assessing the applicability of Pb-210 dating technique in selected mangrove areas in the Philippines

    International Nuclear Information System (INIS)

    Sta Maria, E.J.; Lim, A.B.U.; Ebreo, C.M.H.; Ramirez, J.D.; Castro, K.M.I.; Garcia, M.C.C.; Navarette, I.A.; Salmo, S.G. III

    2015-01-01

    The Pb-210 dating technique has been widely used in many areas as a tool for historical reconstruction of pollution, eutrophication and the many impacts of man on the environment. In the Philippines, the technique has been used in bays (Manila Bay, Sorsogon Bay), in a sound, in a lagoon, in a lake and in a dam. To assess the technique’s applicability in a different environmental setting, sediment cores were collected from mangrove areas in Subic and Pangasinan for Pb-210 analysis. Initial Pb-210 results from these two mangrove areas reveals that Pb-210 is a promising tool for such a new setting. Using the Pb-210 profiles of the sediment cores indicated that Pangasinan mangrove area has a much lower sedimentation rate compared to the Subic mangrove area. The difference in the sediment rates of the two areas could be due to the existing topographic, geographic, hydrodynamic and environment conditions of the area. The age-control information provided by the Pb-210 data could be correlated with other existing data (Chemical and elemental data) for retrospective assessment of the study areas. (author)

  7. RCRA Part A and Part B Permit Application for Waste Management Activities at the Nevada Test Site

    International Nuclear Information System (INIS)

    2009-01-01

    This permit application provides facility information on the design, processes, and security features associated with the proposed Mixed Waste Disposal Unit. The unit will receive and dispose of onsite and offsite containerized low-level mixed waste (LLMW) that has an approved U.S. Department of Energy nexus.

  8. RCRA Part A and Part B Permit Application for Waste Management Activities at the Nevada Test Site

    Energy Technology Data Exchange (ETDEWEB)

    NSTec Environmental Protection and Technical Services

    2009-09-30

    This permit application provides facility information on the design, processes, and security features associated with the proposed Mixed Waste Disposal Unit. The unit will receive and dispose of onsite and offsite containerized low-level mixed waste (LLMW) that has an approved U.S. Department of Energy nexus.

  9. Generating Vegetation Leaf Area Index Earth System Data Record from Multiple Sensors. Part 2; Implementation, Analysis and Validation

    Science.gov (United States)

    Ganguly, Sangram; Samanta, Arindam; Schull, Mitchell A.; Shabanov, Nikolay V.; Milesi, Cristina; Nemani, Ramajrushna R,; Knyazikhin, Yuri; Myneni, Ranga B.

    2008-01-01

    The evaluation of a new global monthly leaf area index (LAI) data set for the period July 1981 to December 2006 derived from AVHRR Normalized Difference Vegetation Index (NDVI) data is described. The physically based algorithm is detailed in the first of the two part series. Here, the implementation, production and evaluation of the data set are described. The data set is evaluated both by direct comparisons to ground data and indirectly through inter-comparisons with similar data sets. This indirect validation showed satisfactory agreement with existing LAI products, importantly MODIS, at a range of spatial scales, and significant correlations with key climate variables in areas where temperature and precipitation limit plant growth. The data set successfully reproduced well-documented spatio-temporal trends and inter-annual variations in vegetation activity in the northern latitudes and semi-arid tropics. Comparison with plot scale field measurements over homogeneous vegetation patches indicated a 7% underestimation when all major vegetation types are taken into account. The error in mean values obtained from distributions of AVHRR LAI and high-resolution field LAI maps for different biomes is within 0.5 LAI for six out of the ten selected sites. These validation exercises though limited by the amount of field data, and thus less than comprehensive, indicated satisfactory agreement between the LAI product and field measurements. Overall, the intercomparison with short-term LAI data sets, evaluation of long term trends with known variations in climate variables, and validation with field measurements together build confidence in the utility of this new 26 year LAI record for long term vegetation monitoring and modeling studies.

  10. Applications of thermal spraying for automotive parts. Jidosha ni okeru yosha no tekiyo

    Energy Technology Data Exchange (ETDEWEB)

    Mori, K [Toyota Motor Co. Ltd., Aichi (Japan)

    1992-10-31

    Application of thermal spraying for automotive parts is described. Outlines of the spraying types that are materialized recently, like 'gel-double spraying of turbo-compressor housing part' and 'iron alloy spraying to outer portion of valve lifter made with Al alloy', are introduced. Gel-double spraying technology is widely used in the jet engine of aeroplane, however its use in automotive turbo was difficult from the reason like quality assurance relating to continuous production of automotives. As a result of the research and development based on the above reasons, a low speed torque is confirmed by the formation of gel-double spray layer. Spraying to the outer part of the valve lifter made from Al alloy is cited as the best example of thermal spraying. Relation between flying speed of spraying particles and degree of flattening, etc., relating to the conformity of adhesion power of coated layer, is explained. Further research topics are given as; improvement of spraying efficiency, improvement of resistance of spraying equipments, unification of equipments standards, quantification of spray coatings, design of spray materials, etc. 9 refs., 8 figs., 1 tab.

  11. Electronics and telecommunications in Poland, issues and perspectives: Part III. Innovativeness, applications, economy, development scenarios, politics

    Science.gov (United States)

    Modelski, Józef; Romaniuk, Ryszard

    2010-09-01

    important role of ET is combined with the existence in the society of an adequate infrastructure which recreates the full development cycle of high technology embracing: people, institutions, finances and logistics, in this also science, higher education, education, continuous training, dissemination and outreach, professional social environment, legal basis, political support and lobbying, innovation structures, applications, industry and economy. The digest of chosen development tendencies in ET was made here from the academic perspective, in a wider scale and on this background the national one, trying to situate this branch in the society, determine its changing role to build a new technical infrastructure of a society based on knowledge, a role of builder of many practical gadgets facilitating life, a role of a big future integrator of today's single bricks into certain more useful unity. This digest does not have a character of a systematic analysis of ET. It is a kind of an arbitrary utterance of the authors inside their field of competence. The aim of this paper is to take an active part in the discussion of the academic community in this country on the development strategy of ET, choice of priorities for cyclically rebuilding economy, in competitive environments. The review paper was initiated by the Committee of Electronics and Telecommunications of Polish Academy of Sciences and was published in Polish as introductory chapter of a dedicated expertise, printed in a book format. This version makes the included opinions available for a wider community.

  12. The Development of Wireless Body Area Network for Motion Sensing Application

    Science.gov (United States)

    Puspitaningayu, P.; Widodo, A.; Yundra, E.; Ramadhany, F.; Arianto, L.; Habibie, D.

    2018-04-01

    The information era has driven the society into the digitally-controlled lifestyle. Wireless body area networks (WBAN) as the specific scope of wireless sensor networks (WSN) is consistently growing into bigger applications. Currently, people are able to monitor their medical parameters by simply using small electronics devices attached to their body and connected to the authorities. On top of that, this time, smart phones are typically equipped with sensors such as accelerometer, gyroscope, barometric pressure, heart rate monitor, etc. It means that the sensing yet the signal processing can be performed by a single device. Moreover, Android opens lot wider opportunities for new applications as the most popular open-sourced smart phone platform. This paper is intended to show the development of motion sensing application which focused on analysing data from accelerometer and gyroscope. Beside reads the sensors, this application also has the ability to convert the sensors’ numerical value into graphs.

  13. Position paper on main areas of nuclear chemistry research and application

    International Nuclear Information System (INIS)

    2001-01-01

    Nuclear chemistry, with its specialized areas of nuclear chemistry, radiochemistry, and radiation chemistry, mainly covers these fields: basic research in nuclear chemistry; actinide chemistry; radioanalysis; nuclear chemistry in the life sciences, geosciences, and cosmic chemistry; radiotracers in technology; nuclear power technology; nuclear waste management; tritium chemistry in fusion technology, and radiation protection and radioecology. In the more than one hundred years of history of this branch of science and technology, which was opened up by the discovery of radioactivity and of the radioelements, pioneering discoveries and developments have been made in many sectors. Far beyond the confines of this area of work, they have achieved overriding importance in applications in many fields of technology and industry and in the life sciences. Research and application in nuclear chemistry continue to be highly relevant to society, ecology, and the economy, and the potential of science and technology in this field in Germany is acknowledged internationally. In the light of this vast area of activity, and against the need to maintain competence in nuclear chemistry for the use of nuclear power, irrespective of the status of this continued use in Germany, nuclear chemistry is indispensable to the solution of future problems. The Nuclear Chemistry Group of the Gesellschaft Deutscher Chemiker therefore uses this position paper to draw attention to the urgent need to keep up and further advance nuclear chemistry applications in a variety of areas of science and technology, also as a public duty of thorough education and research. (orig.) [de

  14. The NASA Applied Science Program Disasters Area: Disaster Applications Research and Response

    Science.gov (United States)

    Murray, J. J.; Lindsay, F. E.; Stough, T.; Jones, C. E.

    2014-12-01

    The goal of the Natural Disaster Application Area is to use NASA's capabilities in spaceborne, airborne, surface observations, higher-level derived data products, and modeling and data analysis to improve natural disaster forecasting, mitigation, and response. The Natural Disaster Application Area applies its remote sensing observations, modeling and analysis capabilities to provide hazard and disaster information where and when it is needed. Our application research activities specifically contribute to 1) Understanding the natural processes that produce hazards, 2)Developing hazard mitigation technologies, and 3)Recognizing vulnerability of interdependent critical infrastructure. The Natural Disasters Application area selects research projects through a rigorous, impartial peer-review process that address a broad spectrum of disasters which afflict populations within the United States, regionally and globally. Currently there are 19 active projects in the research portfolio which address the detection, characterization, forecasting and response to a broad range of natural disasters including earthquakes, tsunamis, volcanic eruptions and ash dispersion, wildfires, hurricanes, floods, tornado damage assessment, oil spills and disaster data mining. The Disasters team works with federal agencies to aid the government in meeting the challenges associated with natural disaster response and to transfer technologies to agencies as they become operational. Internationally, the Disasters Area also supports the Committee on Earth Observations Working Group on Disasters, and the International Charter on Space and Disasters to increase, strengthen, and coordinate contributions of NASA Earth-observing satellites and applications products to disaster risk management. The CEOS group will lead pilot efforts focused on identifying key systems to support flooding, earthquake, and volcanic events.

  15. Ecological risk assessment and carcinogen health risk assessment of arsenic in soils from part area of the Daye City, China

    Science.gov (United States)

    Li, F.; Wang, T.; Xiao, M. S.; Cai, Y.; Zhuang, Z. Y.

    2018-01-01

    Soils in four sampling sites from part area of the Daye City were collected. Concentrations of arsenic (As) in soils in sampling sites were detected by Atomic Fluorescence Spectrometry, ecological risk was calculated by potential ecological risk index (RI) and human health risk was measured by human health risk assessment model established by USEPA. The results showed that, the total content of As in soils in Daye was decreased in the order of S4 (66.58 mg/kg)>S2 (44.73 mg/kg)>S3 (34.86 mg/kg) >S1 (21.84 mg/kg), concentrations in all sampling sites were higher than background values of Hubei Province. The potential risk and human health risk were decreased in the order of S4>S2>S3>S1 and S4>S3>S2>S1, respectively. Specially, S1, S2 and S3 were at low potential ecological risk while S4 was at moderate ecological risk. But there was no carcinogenic risk for human exposure to As in soil in Daye.

  16. Hanford facility dangerous waste Part A, Form 3, and Part B permit application documentation for the Central Waste Complex (WA7890008967) (TSD: TS-2-4)

    International Nuclear Information System (INIS)

    Saueressig, D.G.

    1998-01-01

    The Hanford Facility Dangerous Waste Permit Application is considered to be a single application organized into a General Information Portion (document number DOE/RL-91-28) and a Unit-Specific Portion. The scope of the Unit-Specific Portion is limited to Part B permit application documentation submitted for individual, operating, treatment, storage, and/or disposal units, such as the Central Waste Complex (this document, DOE/RL-91-17). Both the General Information and Unit-Specific portions of the Hanford Facility Dangerous Waste Permit Application address the content of the Part B permit application guidance prepared by the Washington State Department of Ecology (Ecology 1996) and the U.S. Environmental Protection Agency (40 Code of Federal Regulations 270), with additional information needed by the Hazardous and Solid Waste Amendments and revisions of Washington Administrative Code 173-303. For ease of reference, the Washington State Department of Ecology alpha-numeric section identifiers from the permit application guidance documentation (Ecology 1996) follow, in brackets, the chapter headings and subheadings. A checklist indicating where information is contained in the Central Waste Complex permit application documentation, in relation to the Washington State Department of Ecology guidance, is located in the Contents section. Documentation contained in the General Information Portion is broader in nature and could be used by multiple treatment, storage, and/or disposal units (e.g., the glossary provided in the General Information Portion). Wherever appropriate, the Central Waste Complex permit application documentation makes cross-reference to the General Information Portion, rather than duplicating text. Information provided in this Central Waste Complex permit application documentation is current as of May 1998

  17. Hanford facility dangerous waste Part A, Form 3 and Part B permit application documentation, Central Waste Complex (WA7890008967)(TSD: TS-2-4)

    Energy Technology Data Exchange (ETDEWEB)

    Saueressig, D.G.

    1998-05-20

    The Hanford Facility Dangerous Waste Permit Application is considered to be a single application organized into a General Information Portion (document number DOE/RL-91-28) and a Unit-Specific Portion. The scope of the Unit-Specific Portion is limited to Part B permit application documentation submitted for individual, operating, treatment, storage, and/or disposal units, such as the Central Waste Complex (this document, DOE/RL-91-17). Both the General Information and Unit-Specific portions of the Hanford Facility Dangerous Waste Permit Application address the content of the Part B permit application guidance prepared by the Washington State Department of Ecology (Ecology 1996) and the U.S. Environmental Protection Agency (40 Code of Federal Regulations 270), with additional information needed by the Hazardous and Solid Waste Amendments and revisions of Washington Administrative Code 173-303. For ease of reference, the Washington State Department of Ecology alpha-numeric section identifiers from the permit application guidance documentation (Ecology 1996) follow, in brackets, the chapter headings and subheadings. A checklist indicating where information is contained in the Central Waste Complex permit application documentation, in relation to the Washington State Department of Ecology guidance, is located in the Contents section. Documentation contained in the General Information Portion is broader in nature and could be used by multiple treatment, storage, and/or disposal units (e.g., the glossary provided in the General Information Portion). Wherever appropriate, the Central Waste Complex permit application documentation makes cross-reference to the General Information Portion, rather than duplicating text. Information provided in this Central Waste Complex permit application documentation is current as of May 1998.

  18. Effects of Biosolids and Manure Application on Microbial Water Quality in Rural Areas in the US

    Directory of Open Access Journals (Sweden)

    Amira Oun

    2014-11-01

    Full Text Available Most of the waterborne disease outbreaks observed in North America are associated with rural drinking water systems. The majority of the reported waterborne outbreaks are related to microbial agents (parasites, bacteria and viruses. Rural areas are characterized by high livestock density and lack of advanced treatment systems for animal and human waste, and wastewater. Animal waste from livestock production facilities is often applied to land without prior treatment. Biosolids (treated municipal wastewater sludge from large wastewater facilities in urban areas are often transported and applied to land in rural areas. This situation introduces a potential for risk of human exposure to waterborne contaminants such as human and zoonotic pathogens originating from manure, biosolids, and leaking septic systems. This paper focuses on waterborne outbreaks and sources of microbial pollution in rural areas in the US, characterization of the microbial load of biosolids and manure, association of biosolid and manure application with microbial contamination of surface and groundwater, risk assessment and best management practice for biosolids and manure application to protect water quality. Gaps in knowledge are identified, and recommendations to improve the water quality in the rural areas are discussed.

  19. Geophysical survey, Paso Robles geothermal area, California, part of the resource assessment of low- and moderate-temperature geothermal resource areas in California

    Energy Technology Data Exchange (ETDEWEB)

    Chapman, R.H.; Chase, G.W.; Youngs, L.G.

    1980-11-10

    Some general background information concerning the geology and geothermal occurrences in the Southern Coast Ranges is included, as well as the more detailed information dealing with the Paso Robles area proper. Results for two geophysical methods that have been used in the area: the ground magnetic and gravity surveys, are discussed and interpreted.

  20. Assessment of the performance of containment and surveillance equipment part 2: trial application

    International Nuclear Information System (INIS)

    Rezniczek, A.; Richter, B.; Jussofie, A.

    2009-01-01

    The adopted methodological approach for assessing the performance of Containment and Surveillance (C/S) equipment resulted from an account of work performed for and in cooperation with the ESARDA Working Group on C/S. It was applied on a trial basis to a dry storage facility for spent nuclear fuel and consisted of the following steps: (1) Acquisition and analysis of design information and operational characteristics of the facility under consideration, (2) assumptions on diversion and misuse scenarios, (3) assumptions on safeguards approach and definition of safeguards requirements, (4) compilation and characterisation of candidate C/S equipment, (5) performance assessment of C/S equipment. The candidate equipment taken into account was routinely used by the IAEA: DCM14-type camera, Type E capand- wire seal, COBRA fibre optic seal, and VACOSS electronic seal. Four applications were considered: camera mounted in the reception area, seal on secondary lid of transport and storage cask, seal on protective lid, and seal on group of casks. For these applications, requirements were defined and requirement levels were attributed. The assignment of performance levels was carried out by using the technical specifications and design basis tolerances provided by the equipment manufacturers. The results were entered into four performance assessment tables. Although the assessment methodology was not yet fully developed, its trial application yielded promising results with regard to the selection of appropriate C/S equipment.

  1. MSAT wide-area fleet management: End-user requirements and applications

    Science.gov (United States)

    Pedersen, Allister

    1995-01-01

    MSAT (Mobile SATellite) Services will become a reality in North America in 1995. MSAT will provide wide-area voice, data and fax services to land, marine and aeronautical mobile users anywhere in North America including 200 nautical miles off the coasts and into the Arctic waters. MSAT will also convey GPS position information from mobiles to dispatch centers. One broad application of MSAT is Wide Area Fleet Management (WAFM). This paper defines WAFM, outlines end-user requirements and identifies potential applications of MSAT WAFM. The paper draws from information obtained in several preMSAT WAFM field trials in land, marine and aeronautical mobile environments. The paper concludes with an outline of the potential benefits of MSAT WAFM.

  2. Submerged macrophyte communities in the Forsmark area. Building of a GIS application as a tool for biomass estimations

    International Nuclear Information System (INIS)

    Fredriksson, Ronny

    2005-12-01

    The aim of this study was to compile the information from previous studies to produce a GIS application that both illustrates the distribution of different vegetation communities and also makes it possible to estimate the total biomass of the different vegetation communities and its associated fauna. The GIS application was created by means of the software Arc View 3.3 by Environmental Systems Research Institute, Inc. Distribution readings and quantitative data of submerged macrophyte communities and its associated fauna was obtained from studies by Kautsky et al. and by Borgiel. Information about the macrophyte distribution in Laangoersviken, located in the northern parts of Kallrigafjaerden, was obtained from a report by Upplandsstiftelsen. Information about water depth and bottom substrate was available as USGS DEM file, produced by Geological Survey of Sweden. Complementary data of the covering degree of submerged vegetation was obtained from a study using an under water video camera by Tobiasson. Quantitative data on macrophyte and faunal biomass were either obtained from the primary SKB data base SICADA or directly from reports. Samples were compiled and analysed according to dominating vegetation. The work was carried out as follows: Where information about the bottom substrate was available polygons were created by means of the substrate shape file and depth grid from Geological Survey of Sweden. The vegetation community and the covering degree on a certain depth and substrate combination were determined by compiled information from studies by Kautsky and by Borgiel. All observations from a certain bottom substrate were analysed to find the dominating vegetation within different depth ranges. After determining the dominating vegetation, the covering degrees of different macrophyte classes within each depth range were calculated as a mean of all readings. Areas without information about the bottom substrate, but still adjacent to areas included in the

  3. Submerged macrophyte communities in the Forsmark area. Building of a GIS application as a tool for biomass estimations

    Energy Technology Data Exchange (ETDEWEB)

    Fredriksson, Ronny [Univ. of Kalmar (Sweden)

    2005-12-15

    The aim of this study was to compile the information from previous studies to produce a GIS application that both illustrates the distribution of different vegetation communities and also makes it possible to estimate the total biomass of the different vegetation communities and its associated fauna. The GIS application was created by means of the software Arc View 3.3 by Environmental Systems Research Institute, Inc. Distribution readings and quantitative data of submerged macrophyte communities and its associated fauna was obtained from studies by Kautsky et al. and by Borgiel. Information about the macrophyte distribution in Laangoersviken, located in the northern parts of Kallrigafjaerden, was obtained from a report by Upplandsstiftelsen. Information about water depth and bottom substrate was available as USGS DEM file, produced by Geological Survey of Sweden. Complementary data of the covering degree of submerged vegetation was obtained from a study using an under water video camera by Tobiasson. Quantitative data on macrophyte and faunal biomass were either obtained from the primary SKB data base SICADA or directly from reports. Samples were compiled and analysed according to dominating vegetation. The work was carried out as follows: Where information about the bottom substrate was available polygons were created by means of the substrate shape file and depth grid from Geological Survey of Sweden. The vegetation community and the covering degree on a certain depth and substrate combination were determined by compiled information from studies by Kautsky and by Borgiel. All observations from a certain bottom substrate were analysed to find the dominating vegetation within different depth ranges. After determining the dominating vegetation, the covering degrees of different macrophyte classes within each depth range were calculated as a mean of all readings. Areas without information about the bottom substrate, but still adjacent to areas included in the

  4. Lead-acid batteries in micro-hybrid applications. Part II. Test proposal

    Energy Technology Data Exchange (ETDEWEB)

    Schaeck, S.; Stoermer, A.O. [BMW Group, 80788 Muenchen (Germany); Albers, J. [Johnson Controls Power Solutions EMEA, 30419 Hannover (Germany); Weirather-Koestner, D. [ZSW Ulm, 89081 Ulm (Germany); Kabza, H. [Universitaet Ulm, Institut fuer Energiewandlung und -speicherung, 89081 Ulm (Germany)

    2011-02-01

    In the first part of this work selected key parameters for applying lead-acid (LA) batteries in micro-hybrid power systems (MHPS) were investigated. Main results are integrated in an accelerated, comprehensive test proposal presented here. The test proposal aims at a realistic representation of the pSoC operation regime, which is described in Refs. The test is designed to be sensitive with respect to dynamic charge acceptance (DCA) at partially discharged state (critical for regenerative braking) and the internal resistance at high-rate discharge (critical for idling stop applications). First results are presented for up-to-date valve-regulated LA batteries with absorbent glass mat (AGM) separators. The batteries are close to the limits of the first proposal of pass/fail-criteria. Also flooded batteries were tested; the first out of ten units failed already. (author)

  5. APPLICATION OF POLYSTYRENE FOAM CORE FUSIBLE PATTERNS IN PRODUCTION OF GAS TURBINES’ CAST PARTS

    Directory of Open Access Journals (Sweden)

    O. I. Shinsky

    2016-01-01

    Full Text Available The task of replacing the LVM dissolves polystyrene molding on models is at the present time, technologically, economically and environmentally promising from the point of view of industrial applications for gas turbine plants in Ukraine. The authors proposed and tested manufacturing process of casting ceramic molds way to remove the polystyrene model of the dissolution of her organic solvents. Kinetic parameters of the process of dissolving and removing patterns of degradation products the polystyrene in the group of solvents depending on the type and amount of polystyrene were identified. The absence of surface defects of castings, reduction of roughness, increased their accuracy class in comparison to accepted technological regulations of the process of production, which reduced the cost of machined parts and increased utilization of expensive heat-resistant alloys were produced.

  6. Lead-acid batteries in micro-hybrid applications. Part II. Test proposal

    Science.gov (United States)

    Schaeck, S.; Stoermer, A. O.; Albers, J.; Weirather-Koestner, D.; Kabza, H.

    In the first part of this work [1] selected key parameters for applying lead-acid (LA) batteries in micro-hybrid power systems (MHPS) were investigated. Main results are integrated in an accelerated, comprehensive test proposal presented here. The test proposal aims at a realistic representation of the pSoC operation regime, which is described in Refs. [1,6]. The test is designed to be sensitive with respect to dynamic charge acceptance (DCA) at partially discharged state (critical for regenerative braking) and the internal resistance at high-rate discharge (critical for idling stop applications). First results are presented for up-to-date valve-regulated LA batteries with absorbent glass mat (AGM) separators. The batteries are close to the limits of the first proposal of pass/fail-criteria. Also flooded batteries were tested; the first out of ten units failed already.

  7. Ausubel's Theory of Learning and its Application to Introductory Science Part II--Primary Science: An Ausubelian View.

    Science.gov (United States)

    McClelland, J. A. G.

    1982-01-01

    In part 1 (SE 532 193) an outline of Ausubel's learning theory was given. The application of the theory to elementary school science is addressed in this part, clarifying what elementary science means and indicating how it relates to what may be expected to be already known by elementary school children. (Author/JN)

  8. Application of cast nickel alloys for parts of electronics characterised by special magnetic properties

    Directory of Open Access Journals (Sweden)

    W. UhI

    2008-03-01

    Full Text Available Thc thcorctical part of the study highlights thc origin of thc idca 10 start investigations on alloys of high ~nngnctic pcrmcability.manufactured mainly by cornpanics in ~ h Uc S A and Japan.'Phc said materials arc applicd for various pans of ctcctronics uscd by thc military industry. c.g. sntctlitc antcnnas Tor globalcommunication with suhmarincs. and for rcscarch instmrncnts, c,g. fcrromagnctic corcs. Thcy arc chnr:~clcriscd by vcry high lnnpncticpcrrncability. resistivity and corrosion rcsistancc which makc thcm suitablc for opcrat ion undcr cxtrn-~ryingc onditions.Nickel alloys of high magnctic propcrtics arc usuall y manufactured as roZlcd products. The amhition of t hc authors or this srlldy is Inmanufacture !hem as cast prnducts.Thc pmgram of rcscarch incIudcd characteristic of nickcl alloys wirh ddi t i ons of molybdcnum slid iron sn~isryingt hc ahnvc mc~iito ncdrcquircmcnu. with attcn~ionf ocusscd on thcir application for magnctic parts of satcllitc antcnnns and fcrromngnctic corcs.Moulding and casting tcchnologics wcrc proposcd to bcst suit ~ h pcr occss OF maaufacturc of r hcsc clcmcnrs.Thc rangc of chcmicaI cornpostion was sclcctcd 20 cnsurc thc rcquircd magnctic. mcchnnicnl and anti-corrosive pmpcrtics.A scrics of melts was prcparcd and castings of thc abovc mcnlioncd clclncn1s wcrc mndc. Thc chclnicnl composi~ioii of IEIC alloys wasanalyscd along with thc stnlcturc cxarninations nnd quality asscssmcnt rnadc by ~ h cno n-dcsrructi vc rncthods, Casrings wcrc sitbjcctcd tothc finishing trcatmcnt, followed by tests and cxamina~ionsto cnablc thcir practical application.

  9. Decision 99-18: Range Petroleum Corporation application for a well licence, Sturgeon Lake Area

    International Nuclear Information System (INIS)

    1999-07-01

    Range Petroleum Corporation (Range) applied to the Alberta Energy and Utilities Board (EUB) pursuant to Section 2.020 of the Oil and Gas Conservation Regulations for a well licence to drill a sour oil well from a surface location in Legal Subdivision 4, Section 34, West of the fifth Meridian, directionally to a bottom-hole location under Sturgeon Lake. The purpose of the proposed well would be to obtain sour oil production from the Leduc Formation. The well would be a Level 1 well because it would have a potential maximum hydrogen sulphide release rate of 0.0412 cubic m/s. The EUB received objections to the application from landowners, cattle ranchers, farmers, residents, and cottage owners in the area of the proposed well. The application and intervention were considered at a public hearing on 26 January 1999 in Grande Prairie, Alberta, and the Board viewed the proposed surface location, the previous Lds 3-2 surface location, and the surrounding area prior to the hearing. Having carefully considered the evidence, the Board believed that it would be possible to drill the proposed well safely and with minimal risk, subject to attached conditions. But in light of the unique setting of the area, including the residences and the road and lake configurations, and the difficulty that would exist preparing an effective environmental review process (ERP), the Board deferred its decision on the well licence application until an approved ERP is in place

  10. Applicability of contact angle techniques used in the analysis of contact lenses, part 1: comparative methodologies.

    Science.gov (United States)

    Campbell, Darren; Carnell, Sarah Maria; Eden, Russell John

    2013-05-01

    Contact angle, as a representative measure of surface wettability, is often employed to interpret contact lens surface properties. The literature is often contradictory and can lead to confusion. This literature review is part of a series regarding the analysis of hydrogel contact lenses using contact angle techniques. Here we present an overview of contact angle terminology, methodology, and analysis. Having discussed this background material, subsequent parts of the series will discuss the analysis of contact lens contact angles and evaluate differences in published laboratory results. The concepts of contact angle, wettability and wetting are presented as an introduction. Contact angle hysteresis is outlined and highlights the advantages in using dynamic analytical techniques over static methods. The surface free energy of a material illustrates how contact angle analysis is capable of providing supplementary surface characterization. Although single values are able to distinguish individual material differences, surface free energy and dynamic methods provide an improved understanding of material behavior. The frequently used sessile drop, captive bubble, and Wilhelmy plate techniques are discussed. Their use as both dynamic and static methods, along with the advantages and disadvantages of each technique, is explained. No single contact angle technique fully characterizes the wettability of a material surface, and the application of complimenting methods allows increased characterization. At present, there is not an ISO standard method designed for soft materials. It is important that each contact angle technique has a standard protocol, as small protocol differences between laboratories often contribute to a variety of published data that are not easily comparable.

  11. Theory and applications for optimization of every part of a photovoltaic system

    Science.gov (United States)

    Redfield, D.

    1978-01-01

    A general method is presented for quantitatively optimizing the design of every part and fabrication step of an entire photovoltaic system, based on the criterion of minimum cost/Watt for the system output power. It is shown that no element or process step can be optimized properly by considering only its own cost and performance. Moreover, a fractional performance loss at any fabrication step within the cell or array produces the same fractional increase in the cost/Watt of the entire array, but not of the full system. One general equation is found to be capable of optimizing all parts of a system, although the cell and array steps are basically different from the power-handling elements. Applications of this analysis are given to show (1) when Si wafers should be cut to increase their packing fraction; and (2) what the optimum dimensions for solar cell metallizations are. The optimum shadow fraction of the fine grid is shown to be independent of metal cost and resistivity as well as cell size. The optimum thicknesses of both the fine grid and the bus bar are substantially greater than the values in general use, and the total array cost has a major effect on these values. By analogy, this analysis is adaptable to other solar energy systems.

  12. Field Portable Low Temperature Porous Layer Open Tubular Cryoadsorption Headspace Sampling and Analysis Part II: Applications*

    Science.gov (United States)

    Harries, Megan; Bukovsky-Reyes, Santiago; Bruno, Thomas J.

    2016-01-01

    This paper details the sampling methods used with the field portable porous layer open tubular cryoadsorption (PLOT-cryo) approach, described in Part I of this two-part series, applied to several analytes of interest. We conducted tests with coumarin and 2,4,6-trinitrotoluene (two solutes that were used in initial development of PLOT-cryo technology), naphthalene, aviation turbine kerosene, and diesel fuel, on a variety of matrices and test beds. We demonstrated that these analytes can be easily detected and reliably identified using the portable unit for analyte collection. By leveraging efficiency-boosting temperature control and the high flow rate multiple capillary wafer, very short collection times (as low as 3 s) yielded accurate detection. For diesel fuel spiked on glass beads, we determined a method detection limit below 1 ppm. We observed greater variability among separate samples analyzed with the portable unit than previously documented in work using the laboratory-based PLOT-cryo technology. We identify three likely sources that may help explain the additional variation: the use of a compressed air source to generate suction, matrix geometry, and variability in the local vapor concentration around the sampling probe as solute depletion occurs both locally around the probe and in the test bed as a whole. This field-portable adaptation of the PLOT-cryo approach has numerous and diverse potential applications. PMID:26726934

  13. Field portable low temperature porous layer open tubular cryoadsorption headspace sampling and analysis part II: Applications.

    Science.gov (United States)

    Harries, Megan; Bukovsky-Reyes, Santiago; Bruno, Thomas J

    2016-01-15

    This paper details the sampling methods used with the field portable porous layer open tubular cryoadsorption (PLOT-cryo) approach, described in Part I of this two-part series, applied to several analytes of interest. We conducted tests with coumarin and 2,4,6-trinitrotoluene (two solutes that were used in initial development of PLOT-cryo technology), naphthalene, aviation turbine kerosene, and diesel fuel, on a variety of matrices and test beds. We demonstrated that these analytes can be easily detected and reliably identified using the portable unit for analyte collection. By leveraging efficiency-boosting temperature control and the high flow rate multiple capillary wafer, very short collection times (as low as 3s) yielded accurate detection. For diesel fuel spiked on glass beads, we determined a method detection limit below 1 ppm. We observed greater variability among separate samples analyzed with the portable unit than previously documented in work using the laboratory-based PLOT-cryo technology. We identify three likely sources that may help explain the additional variation: the use of a compressed air source to generate suction, matrix geometry, and variability in the local vapor concentration around the sampling probe as solute depletion occurs both locally around the probe and in the test bed as a whole. This field-portable adaptation of the PLOT-cryo approach has numerous and diverse potential applications. Published by Elsevier B.V.

  14. Analysis of precious metals at parts-per-billion levels in industrial applications

    International Nuclear Information System (INIS)

    Tickner, James; O'Dwyer, Joel; Roach, Greg; Smith, Michael; Van Haarlem, Yves

    2015-01-01

    Precious metals, including gold and the platinum group metals (notable Pt, Pd and Rh), are mined commercially at concentrations of a few parts-per-million and below. Mining and processing operations demand sensitive and rapid analysis at concentrations down to about 100 parts-per-billion (ppb). In this paper, we discuss two technologies being developed to meet this challenge: X-ray fluorescence (XRF) and gamma-activation analysis (GAA). We have designed on-stream XRF analysers capable of measuring targeted elements in slurries with precisions in the 35–70 ppb range. For the past two years, two on-stream analysers have been in continuous operation at a precious metals concentrator plant. The simultaneous measurement of feed and waste stream grades provides real-time information on metal recovery, allowing changes in operating conditions and plant upsets to be detected and corrected more rapidly. Separately, we have been developing GAA for the measurement of gold as a replacement for the traditional laboratory fire-assay process. High-energy Bremsstrahlung X-rays are used to excite gold via the 197 Au(γ,γ′) 197 Au-M reaction, and the gamma-rays released in the decay of the meta-state are then counted. We report on work to significantly improve accuracy and detection limits. - Highlights: • X-ray fluorescence analysis at sub-parts-per-million concentration in bulk materials. • Gamma activation analysis of gold at high accuracy and low concentrations. • Use of advanced Monte Carlo techniques to optimise radiation-based analysers. • Industrial application of XRF and GAA technologies for minerals processing.

  15. Experimental investigation of the predictive capabilities of data driven modeling techniques in hydrology - Part 2: Application

    Directory of Open Access Journals (Sweden)

    A. Elshorbagy

    2010-10-01

    Full Text Available In this second part of the two-part paper, the data driven modeling (DDM experiment, presented and explained in the first part, is implemented. Inputs for the five case studies (half-hourly actual evapotranspiration, daily peat soil moisture, daily till soil moisture, and two daily rainfall-runoff datasets are identified, either based on previous studies or using the mutual information content. Twelve groups (realizations were randomly generated from each dataset by randomly sampling without replacement from the original dataset. Neural networks (ANNs, genetic programming (GP, evolutionary polynomial regression (EPR, Support vector machines (SVM, M5 model trees (M5, K-nearest neighbors (K-nn, and multiple linear regression (MLR techniques are implemented and applied to each of the 12 realizations of each case study. The predictive accuracy and uncertainties of the various techniques are assessed using multiple average overall error measures, scatter plots, frequency distribution of model residuals, and the deterioration rate of prediction performance during the testing phase. Gamma test is used as a guide to assist in selecting the appropriate modeling technique. Unlike two nonlinear soil moisture case studies, the results of the experiment conducted in this research study show that ANNs were a sub-optimal choice for the actual evapotranspiration and the two rainfall-runoff case studies. GP is the most successful technique due to its ability to adapt the model complexity to the modeled data. EPR performance could be close to GP with datasets that are more linear than nonlinear. SVM is sensitive to the kernel choice and if appropriately selected, the performance of SVM can improve. M5 performs very well with linear and semi linear data, which cover wide range of hydrological situations. In highly nonlinear case studies, ANNs, K-nn, and GP could be more successful than other modeling techniques. K-nn is also successful in linear situations, and it

  16. Experimental investigation of the predictive capabilities of data driven modeling techniques in hydrology - Part 2: Application

    Science.gov (United States)

    Elshorbagy, A.; Corzo, G.; Srinivasulu, S.; Solomatine, D. P.

    2010-10-01

    In this second part of the two-part paper, the data driven modeling (DDM) experiment, presented and explained in the first part, is implemented. Inputs for the five case studies (half-hourly actual evapotranspiration, daily peat soil moisture, daily till soil moisture, and two daily rainfall-runoff datasets) are identified, either based on previous studies or using the mutual information content. Twelve groups (realizations) were randomly generated from each dataset by randomly sampling without replacement from the original dataset. Neural networks (ANNs), genetic programming (GP), evolutionary polynomial regression (EPR), Support vector machines (SVM), M5 model trees (M5), K-nearest neighbors (K-nn), and multiple linear regression (MLR) techniques are implemented and applied to each of the 12 realizations of each case study. The predictive accuracy and uncertainties of the various techniques are assessed using multiple average overall error measures, scatter plots, frequency distribution of model residuals, and the deterioration rate of prediction performance during the testing phase. Gamma test is used as a guide to assist in selecting the appropriate modeling technique. Unlike two nonlinear soil moisture case studies, the results of the experiment conducted in this research study show that ANNs were a sub-optimal choice for the actual evapotranspiration and the two rainfall-runoff case studies. GP is the most successful technique due to its ability to adapt the model complexity to the modeled data. EPR performance could be close to GP with datasets that are more linear than nonlinear. SVM is sensitive to the kernel choice and if appropriately selected, the performance of SVM can improve. M5 performs very well with linear and semi linear data, which cover wide range of hydrological situations. In highly nonlinear case studies, ANNs, K-nn, and GP could be more successful than other modeling techniques. K-nn is also successful in linear situations, and it should

  17. Comparison of gimbal approaches to decrease drag force and radar cross sectional area in missile application

    Science.gov (United States)

    Sakarya, Doǧan Uǧur

    2017-05-01

    Drag force effect is an important aspect of range performance in missile applications especially for long flight time. However, old fashioned gimbal approaches force to increase missile diameter. This increase has negative aspect of rising in both drag force and radar cross sectional area. A new gimbal approach was proposed recently. It uses a beam steering optical arrangement. Therefore, it needs less volume envelope for same field of regard and same optomechanical assembly than the old fashioned gimbal approaches. In addition to longer range performance achieved with same fuel in the new gimbal approach, this method provides smaller cross sectional area which can be more invisible in enemies' radar. In this paper, the two gimbal approaches - the old fashioned one and the new one- are compared in order to decrease drag force and radar cross sectional area in missile application. In this study; missile parameters are assumed to generate gimbal and optical design parameters. Optical design is performed according to these missile criteria. Two gimbal configurations are designed with respect to modeled missile parameters. Also analyzes are performed to show decreased drag force and radar cross sectional area in the new approach for comparison.

  18. Vibrodynamical tests of RP equipment with application of imitation area of WWER-1000 reactor

    International Nuclear Information System (INIS)

    Khajretdinov, V.U.; Tarkhanov, V.V.; Rodionova, I.N.

    2015-01-01

    Performance of preoperational tests and measurements with application of imitation area of the reactor is a distinctive characteristic of putting into operation of NPP Units with WWER-1000/1200. The imitation area consists of 163 full-scale FA models, where fuel matrixes made of nuclear-fissionable material, are replaced by leaden simulators. Vibrodynamic tests involve inspection of hydrodynamic disturbances in the primary circuit (dynamic impact on the inspected elements), characteristics of vibration response of the main equipment stress-deformed state of bearing structure, and also parameters of moving and geometry of the inspected objects (boundary conditions at process simulation). Preoperational tests and measurements on the simulated area of WWER-1000/1200 are obligatory and performed at every unit of NPP of this type [ru

  19. Environmental risk analysis of oil handling facilities in port areas. Application to Tarragona harbor (NE Spain).

    Science.gov (United States)

    Valdor, Paloma F; Gómez, Aina G; Puente, Araceli

    2015-01-15

    Diffuse pollution from oil spills is a widespread problem in port areas (as a result of fuel supply, navigation and loading/unloading activities). This article presents a method to assess the environmental risk of oil handling facilities in port areas. The method is based on (i) identification of environmental hazards, (ii) characterization of meteorological and oceanographic conditions, (iii) characterization of environmental risk scenarios, and (iv) assessment of environmental risk. The procedure has been tested by application to the Tarragona harbor. The results show that the method is capable of representing (i) specific local pollution cases (i.e., discriminating between products and quantities released by a discharge source), (ii) oceanographic and meteorological conditions (selecting a representative subset data), and (iii) potentially affected areas in probabilistic terms. Accordingly, it can inform the design of monitoring plans to study and control the environmental impact of these facilities, as well as the design of contingency plans. Copyright © 2014 Elsevier Ltd. All rights reserved.

  20. Nanoporous Ni with High Surface Area for Potential Hydrogen Storage Application.

    Science.gov (United States)

    Zhou, Xiaocao; Zhao, Haibo; Fu, Zhibing; Qu, Jing; Zhong, Minglong; Yang, Xi; Yi, Yong; Wang, Chaoyang

    2018-06-01

    Nanoporous metals with considerable specific surface areas and hierarchical pore structures exhibit promising applications in the field of hydrogen storage, electrocatalysis, and fuel cells. In this manuscript, a facile method is demonstrated for fabricating nanoporous Ni with a high surface area by using SiO₂ aerogel as a template, i.e., electroless plating of Ni into an SiO₂ aerogel template followed by removal of the template at moderate conditions. The effects of the prepared conditions, including the electroless plating time, temperature of the structure, and the magnetism of nanoporous Ni are investigated in detail. The resultant optimum nanoporous Ni with a special 3D flower-like structure exhibited a high specific surface area of about 120.5 m²/g. The special nanoporous Ni exhibited a promising prospect in the field of hydrogen storage, with a hydrogen capacity of 0.45 wt % on 4.5 MPa at room temperature.

  1. EVALUATION OF DATA APPLICABILITY FOR D-INSAR IN AREAS COVERED BY ABUNDANT VEGETATION

    Directory of Open Access Journals (Sweden)

    P. Zhang

    2018-04-01

    Full Text Available In the past few years, the frequent geological disasters have caused enormous casualties and economic losses. Therefore, D-InSAR (differential interferometry synthetic aperture radar has been widely used in early-warning and post disaster assessment. However, large area of decorrelation often occurs in the areas covered with abundant vegetation, which seriously affects the accuracy of surface deformation monitoring. In this paper, we analysed the effect of sensor parameters and external environment parameters on special decorrelation. Then Synthetic Aperture Radar (SAR datasets acquired by X-band TerraSAR-X, Phased Array type L-band Synthetic Aperture Satellite-2 (ALOS-2, and C-band Sentinel-1 in Guizhou province were collected and analysed to generate the maps of coherence, which were used to evaluating the applicability of datasets of different wavelengths for D-InSAR in forest area. Finally, we found that datasets acquired by ALOS-2 had the best monitoring effect.

  2. 10 CFR Appendix III to Part 960 - Application of the System and Technical Guidelines During the Siting Process

    Science.gov (United States)

    2010-01-01

    ... 960—Application of the System and Technical Guidelines During the Siting Process 1. This appendix... 10 Energy 4 2010-01-01 2010-01-01 false Application of the System and Technical Guidelines During the Siting Process III Appendix III to Part 960 Energy DEPARTMENT OF ENERGY GENERAL GUIDELINES FOR THE...

  3. Stochastic theory of nonequilibrium steady states. Part II: Applications in chemical biophysics

    International Nuclear Information System (INIS)

    Ge Hao; Qian Min; Qian Hong

    2012-01-01

    The mathematical theory of nonequilibrium steady state (NESS) has a natural application in open biochemical systems which have sustained source(s) and sink(s) in terms of a difference in their chemical potentials. After a brief introduction in Section , in Part II of this review, we present the widely studied biochemical enzyme kinetics, the workhorse of biochemical dynamic modeling, in terms of the theory of NESS (Section ). We then show that several phenomena in enzyme kinetics, including a newly discovered activation–inhibition switching (Section ) and the well-known non-Michaelis–Menten-cooperativity (Section ) and kinetic proofreading (Section ), are all consequences of the NESS of driven biochemical systems with associated cycle fluxes. Section is focused on nonlinear and nonequilibrium systems of biochemical reactions. We use the phosphorylation–dephosphorylation cycle (PdPC), one of the most important biochemical signaling networks, as an example (Section ). It starts with a brief introduction of the Delbrück–Gillespie process approach to mesoscopic biochemical kinetics (Sections ). We shall discuss the zeroth-order ultrasensitivity of PdPC in terms of a new concept — the temporal cooperativity (Sections ), as well as PdPC with feedback which leads to biochemical nonlinear bistability (Section ). Also, both are nonequilibrium phenomena. PdPC with a nonlinear feedback is kinetically isomorphic to a self-regulating gene expression network, hence the theory of NESS discussed here could have wide applications to many other biochemical systems.

  4. A new AS-display as part of the MIRO lightweight robot for surgical applications

    Science.gov (United States)

    Grossmann, Christoph M.

    2010-02-01

    The DLR MIRO is the second generation of versatile robot arms for surgical applications, developed at the Institute for Robotics and Mechatronics at Deutsche Zentrum für Luft- und Raumfahrt (DLR) in Oberpfaffenhofen, Germany. With its low weight of 10 kg and dimensions similar to those of the human arm, the MIRO robot can assist the surgeon directly at the operating table where space is scarce. The planned scope of applications of this robot arm ranges from guiding a laser unit for the precise separation of bone tissue in orthopedics to positioning holes for bone screws, robot assisted endoscope guidance and on to the multi-robot concept for endoscopic minimally invasive surgery. A stereo-endoscope delivers two full HD video streams that can even be augmented with information, e.g vectors indicating the forces that act on the surgical tool at any given moment. SeeFront's new autostereoscopic 3D display SF 2223, being a part of the MIRO assembly, will let the surgeon view the stereo video stream in excellent quality, in real time and without the need for any viewing aids. The presentation is meant to provide an insight into the principles at the basis of the SeeFront 3D technology and how they allow the creation of autostereoscopic display solutions ranging from smallest "stamp-sized" displays to 30" desktop versions, which all provide comfortable freedom of movement for the viewer along with excellent 3D image quality.

  5. The WIPP RCRA Part B permit application for TRU mixed waste disposal

    International Nuclear Information System (INIS)

    Johnson, J.E.

    1995-01-01

    In August 1993, the New Mexico Environment Department (NMED) issued a draft permit for the Waste Isolation Pilot Plant (WIPP) to begin experiments with transuranic (TRU) mixed waste. Subsequently, the Department of Energy (DOE) decided to cancel the on-site test program, opting instead for laboratory testing. The Secretary of the NMED withdrew the draft permit in 1994, ordering the State's Hazardous and Radioactive Waste Bureau to work with the DOE on submittal of a revised permit application. Revision 5 of the WIPP's Resource Conservation and Recovery Act (RCRA) Part B Permit Application was submitted to the NMED in May 1995, focusing on disposal of 175,600 m 3 of TRU mixed waste over a 25 year span plus ten years for closure. A key portion of the application, the Waste Analysis Plan, shifted from requirements to characterize a relatively small volume of TRU mixed waste for on-site experiments, to describing a complete program that would apply to all DOE TRU waste generating facilities and meet the appropriate RCRA regulations. Waste characterization will be conducted on a waste stream basis, fitting into three broad categories: (1) homogeneous solids, (2) soil/gravel, and (3) debris wastes. Techniques used include radiography, visually examining waste from opened containers, radioassay, headspace gas sampling, physical sampling and analysis of homogeneous wastes, and review of documented acceptable knowledge. Acceptable knowledge of the original organics and metals used, and the operations that generated these waste streams is sufficient in most cases to determine if the waste has toxicity characteristics, hazardous constituents, polychlorinated biphenyls (PBCs), or RCRA regulated metals

  6. Edaiila area of interest non-renewable resource assessment (phase 1) Great Bear Lake area, Northwest Territories Parts of NTS 86 K, 86 L, 86 M, 86 N and 96 I

    Energy Technology Data Exchange (ETDEWEB)

    Gebert, J.S.; Jackson, J.E.; O' Neil, C.E. [AMEC Americas Ltd., Calgary, AB (Canada). Earth and Environment Division

    2007-07-01

    The Edaiila study area of interest is located in the Deline District of the Sahtu Settlement area in the Northwest Territories. It lies in the Proterozoic Bear geologic province of the Canadian Shield. The area is currently covered by prospecting claims and is likely undergoing exploration for uranium, precious metals, base metals and diamonds. This document presented a Phase 1 non-renewable resource assessment (NRA) of the area that was completed as part of the Northwest Territories Protect Area Strategy (PAS). It presented compiled historical information, provided a preliminary resource assessment and made recommendations for further Phase 2 studies. This region is within the continuous permafrost zone and is characterized by a high subarctic climate. The study area straddles the tree line and contains vegetation typical of taiga and tundra regions. The bedrock covering the flat to gently rolling topography is covered by undulating glacial drift, raised beaches and outwash deposits. About 25 per cent of the area is covered by wetlands. The Bear province is subdivided into two major domains, the Wopmay orogen and the Coppermine homocline. In the eastern portion of the study area, basement rocks are part of the Great Bear magmatic zone and are locally exposed in the Fault River area. Although basement rocks in the western portion of the study area are not exposed, they are assumed to be composed of the Hottah terrane. 86 refs., 14 tabs., 7 figs., 4 appendices.

  7. The market value of cultural heritage in urban areas: an application of spatial hedonic pricing

    Science.gov (United States)

    Lazrak, Faroek; Nijkamp, Peter; Rietveld, Piet; Rouwendal, Jan

    2014-01-01

    The current literature often values intangible goods like cultural heritage by applying stated preference methods. In recent years, however, the increasing availability of large databases on real estate transactions and listed prices has opened up new research possibilities and has reduced various existing barriers to applications of conventional (spatial) hedonic analysis to the real estate market. The present paper provides one of the first applications using a spatial autoregressive model to investigate the impact of cultural heritage—in particular, listed buildings and historic-cultural sites (or historic landmarks)—on the value of real estate in cities. In addition, this paper suggests a novel way of specifying the spatial weight matrix—only prices of sold houses influence current price—in identifying the spatial dependency effects between sold properties. The empirical application in the present study concerns the Dutch urban area of Zaanstad, a historic area for which over a long period of more than 20 years detailed information on individual dwellings, and their market prices are available in a GIS context. In this paper, the effect of cultural heritage is analysed in three complementary ways. First, we measure the effect of a listed building on its market price in the relevant area concerned. Secondly, we investigate the value that listed heritage has on nearby property. And finally, we estimate the effect of historic-cultural sites on real estate prices. We find that, to purchase a listed building, buyers are willing to pay an additional 26.9 %, while surrounding houses are worth an extra 0.28 % for each additional listed building within a 50-m radius. Houses sold within a conservation area appear to gain a premium of 26.4 % which confirms the existence of a `historic ensemble' effect.

  8. [Public food service in Milan city and Hinterland: GMP application (Part 1)].

    Science.gov (United States)

    Pontello, M; Dal Vecchio, A; Bertini, I; Valerio, E

    2005-01-01

    Food service establishments are recognized as a critical sector concerning foodborne diseases occurrence, that is associated to contributing factors such as the anticipated preparation of meals that are often highly handled, and long-time distributed. A survey has been planned to evaluate the application of HACCP plan, in order to select a statistically representative sample of food services (restaurant, pizza-shop, bar, ..) in two Milan area' Public Health Units (PHU). During the inspections a proper check-list has been filled up in order to give a conformity evaluation about the global situation and about three specific sections: hygiene of food-handlers, procedures control, temperatures management. The food services have been found satisfactory in 9/106 and 5/54 cases in Milan City and in hinterland, respectively; among the two areas, highly significant differences have been revealed about temperatures management (68% and 28% unsatisfactory, respectively). In Milan City restaurants provided with HACCP plan scores are significantly different from unprovided restaurants scores (global and the three sections' evaluation); in Milan hinterland differences between provided and unprovided HACCP plan restaurants regard temperature management scores only. Useful suggestions to improve the quality of surveillance activity come from complex and heterogeneous findings shown in this study.

  9. Mapping urban climate zones and quantifying climate behaviors - An application on Toulouse urban area (France)

    Energy Technology Data Exchange (ETDEWEB)

    Houet, Thomas, E-mail: thomas.houet@univ-tlse2.fr [GEODE UMR 5602 CNRS, Universite de Toulouse, 5 allee Antonio Machado, 31058 Toulouse Cedex (France); Pigeon, Gregoire [Centre National de Recherches Meteorologiques, Meteo-France/CNRM-GAME, 42 avenue Coriolis, 31057 Toulouse Cedex (France)

    2011-08-15

    Facing the concern of the population to its environment and to climatic change, city planners are now considering the urban climate in their choices of planning. The use of climatic maps, such Urban Climate Zone-UCZ, is adapted for this kind of application. The objective of this paper is to demonstrate that the UCZ classification, integrated in the World Meteorological Organization guidelines, first can be automatically determined for sample areas and second is meaningful according to climatic variables. The analysis presented is applied on Toulouse urban area (France). Results show first that UCZ differentiate according to air and surface temperature. It has been possible to determine the membership of sample areas to an UCZ using landscape descriptors automatically computed with GIS and remote sensed data. It also emphasizes that climate behavior and magnitude of UCZ may vary from winter to summer. Finally we discuss the influence of climate data and scale of observation on UCZ mapping and climate characterization. - Highlights: > We proposed a method to map Urban Climate Zones and quantify their climate behaviors. > UCZ is an expert-based classification and is integrated in the WMO guidelines. > We classified 26 sample areas and quantified climate behaviors in winter/summer. > Results enhance urban heat islands and outskirts are surprisingly hottest in summer. > Influence of scale and climate data on UCZ mapping and climate evaluation is discussed. - This paper presents an automated approach to classify sample areas in a UCZ using landscape descriptors and demonstrate that climate behaviors of UCZ differ.

  10. Applicability of the grounded-source airborne electromagnetics to coastal areas

    International Nuclear Information System (INIS)

    Ito, Hisatoshi; Tsukuda, Kazuhiro; Suzuki, Koichi; Kaieda, Hideshi; Kiho, Kenzo; Mogi, Toru

    2012-01-01

    Understanding geological and hydrogeological characteristics in coastal areas is an issue of paramount importance especially with regard to siting of geological disposal of nuclear wastes, whereas conventional airborne electromagnetic (AEM) surveys can reveal an electrical resistivity structure to a depth of only ∼200 m. In order to enhance the depth of investigation, we have developed a new type of AEM, grounded-electrical-source airborne transient electromagnetics (GREATEM). Here we have applied GREATEM to two coastal areas in Japan; Kujukuri, an alluvial coastal plain where thick Quaternary sediments prevail, and northwestern part of Awaji Island, where granitic rocks are dominant. It was found that the GREATEM system can reveal resistivity structure to a depth of ∼500 m and also high quality data are available just beneath the shoreline where shallow water prevails. (author)

  11. Greater than the sum of their parts: Exploring the environmental complementarity of state, private and community protected areas

    Directory of Open Access Journals (Sweden)

    Tiphaine Leménager

    2014-12-01

    Full Text Available In a context of unprecedented environmental crisis, protected areas are expected to play a central role. Although considerable work has been done to understand the effectiveness of different types of protected area, there has been limited investigation of how a combination of different types of protected area within a system affects its overall environmental outcomes. Defining and using the concept of environmental complementarity, the paper explores whether or not the presence of private, state and community protected areas in a landscape has a positive effect on biodiversity conservation outcomes. Based on a Kenyan case study, it emphasizes the important and currently undervalued role of state protected areas and shows that other types of protected area can be analyzed as being a support. It suggests there is a complex array of complementarities between community, state and private protected areas. Differences in management capacity, staff skills, social acceptability, access to financial resources, tourism products, ecological resources, etc. between types of protected area were found to drive additionality and synergistic complementarities that undeniably contribute to strengthening the overall protected area system and increasing its resilience, as well as its capacity to generate environmental outcomes. Keywords: Biodiversity, Protected area, Environmental complementarity, Strategies

  12. [The external patello-tibial transfixation (EPTT). Part II: Clinical application and results].

    Science.gov (United States)

    Ishaque, B; Gotzen, L; Ziring, E; Petermann, J

    1999-07-01

    In part I of the paper the biomechanical and technical background of the EPTT using the MPT fixator and the indications for this procedure have been described. In part II we report about the clinical application of the EPTT in 67 patients with a wide spectrum of repairs and reconstructions of the extensor mechanism. 48 patients had fresh injuries, 18 of them with severe concomitant knee lesions and 19 patients had neglected rsp. unsuccessfully operated injuries. There were 4 deep infections, two of them related to the MPT fixator. In the patients with uneventful healing the fixator remained in place for 7.3 weeks in average. The clinical, isokinetic and radiological results were reviewed in 17 patients with an average follow-up time of 37.3 months. There were 5 patients with partial patellectomy and tendon reattachment because of lower patella pole comminution and 12 patients with tendon reattachment ruptured at the inferior patella pole or suture repair in midsubstance rupture. The clinical results according to the IKDC score were rated in 3 patients as normal, in 10 patients as nearly normal and in 4 patients as abnormal. This rating was highly dependend on the subjective judgement by the patients who considered their operated knees not as normal as the contralateral knees. From our clinical experiences and results we can derive that the EPTT enables the surgical management of extensor mechanism disruptions with a minimum of internal fixation material and provides a safe protection of the repairs and reconstructions during the healing period. The EPTT allows immediate unrestricted functional rehabilitation and early walking without crutches. Thus the EPTT represents an effective alternative to the patello-tibial cerclage with a wire or synthetic ligaments.

  13. Simulation technique for slurries interacting with moving parts and deformable solids with applications

    Science.gov (United States)

    Mutabaruka, Patrick; Kamrin, Ken

    2018-04-01

    A numerical method for particle-laden fluids interacting with a deformable solid domain and mobile rigid parts is proposed and implemented in a full engineering system. The fluid domain is modeled with a lattice Boltzmann representation, the particles and rigid parts are modeled with a discrete element representation, and the deformable solid domain is modeled using a Lagrangian mesh. The main issue of this work, since separately each of these methods is a mature tool, is to develop coupling and model-reduction approaches in order to efficiently simulate coupled problems of this nature, as in various geological and engineering applications. The lattice Boltzmann method incorporates a large eddy simulation technique using the Smagorinsky turbulence model. The discrete element method incorporates spherical and polyhedral particles for stiff contact interactions. A neo-Hookean hyperelastic model is used for the deformable solid. We provide a detailed description of how to couple the three solvers within a unified algorithm. The technique we propose for rubber modeling/coupling exploits a simplification that prevents having to solve a finite-element problem at each time step. We also developed a technique to reduce the domain size of the full system by replacing certain zones with quasi-analytic solutions, which act as effective boundary conditions for the lattice Boltzmann method. The major ingredients of the routine are separately validated. To demonstrate the coupled method in full, we simulate slurry flows in two kinds of piston valve geometries. The dynamics of the valve and slurry are studied and reported over a large range of input parameters.

  14. Thermodynamic and exergoeconomic analysis of a cement plant: Part II – Application

    International Nuclear Information System (INIS)

    Atmaca, Adem; Yumrutaş, Recep

    2014-01-01

    Highlights: • The overall energy and exergy efficiencies of the plant is found to be 59.37% and 38.99% respectively. • Performance assessment of a cement plant indicates that the calcination process involves the highest portion of energy losses. • The specific exergetic cost cement produced by the cement plant is calculated to be 180.5 USD/GJ. • The specific cement manufacturing cost is found to be 41.84 USD/ton. - Abstract: This paper is Part 2 of the study on the thermodynamic and exergoeconomic analysis of a cement plant. In Part 1, thermodynamic and exergoeconomic formulations and procedure for such a comprehensive analysis are provided while this paper provides an application of the developed formulation that considers an actual cement plant located in Gaziantep, Turkey. The overall energy and exergy efficiencies of the plant is found to be 59.37% and 38.99% respectively. The exergy destructions, exergetic cost allocations, and various exergoeconomic performance parameters are determined by using the exergoeconomic analysis based on specific exergy costing method (SPECO) for the entire plant and its components. The specific unit exergetic cost of the farine, clinker and cement produced by the cement plant are calculated to be 43.77 USD/GJ, 133.72 USD/GJ and 180.5 USD/GJ respectively. The specific manufacturing costs of farine, clinker and cement are found to be 3.8 USD/ton, 33.11 USD/ton and 41.84 USD/ton respectively

  15. Chemical approaches toward graphene-based nanomaterials and their applications in energy-related areas.

    Science.gov (United States)

    Luo, Bin; Liu, Shaomin; Zhi, Linjie

    2012-03-12

    A 'gold rush' has been triggered all over the world for exploiting the possible applications of graphene-based nanomaterials. For this purpose, two important problems have to be solved; one is the preparation of graphene-based nanomaterials with well-defined structures, and the other is the controllable fabrication of these materials into functional devices. This review gives a brief overview of the recent research concerning chemical and thermal approaches toward the production of well-defined graphene-based nanomaterials and their applications in energy-related areas, including solar cells, lithium ion secondary batteries, supercapacitors, and catalysis. Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  16. Integration of geophysical datasets by a conjoint probability tomography approach: application to Italian active volcanic areas

    Directory of Open Access Journals (Sweden)

    D. Patella

    2008-06-01

    Full Text Available We expand the theory of probability tomography to the integration of different geophysical datasets. The aim of the new method is to improve the information quality using a conjoint occurrence probability function addressed to highlight the existence of common sources of anomalies. The new method is tested on gravity, magnetic and self-potential datasets collected in the volcanic area of Mt. Vesuvius (Naples, and on gravity and dipole geoelectrical datasets collected in the volcanic area of Mt. Etna (Sicily. The application demonstrates that, from a probabilistic point of view, the integrated analysis can delineate the signature of some important volcanic targets better than the analysis of the tomographic image of each dataset considered separately.

  17. Stochastic Characterization of Communication Network Latency for Wide Area Grid Control Applications.

    Energy Technology Data Exchange (ETDEWEB)

    Ameme, Dan Selorm Kwami [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Guttromson, Ross [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-10-01

    This report characterizes communications network latency under various network topologies and qualities of service (QoS). The characterizations are probabilistic in nature, allowing deeper analysis of stability for Internet Protocol (IP) based feedback control systems used in grid applications. The work involves the use of Raspberry Pi computers as a proxy for a controlled resource, and an ns-3 network simulator on a Linux server to create an experimental platform (testbed) that can be used to model wide-area grid control network communications in smart grid. Modbus protocol is used for information transport, and Routing Information Protocol is used for dynamic route selection within the simulated network.

  18. Wide area 2D/3D imaging development, analysis and applications

    CERN Document Server

    Langmann, Benjamin

    2014-01-01

    Imaging technology is an important research area and it is widely utilized in a growing number of disciplines ranging from gaming, robotics and automation to medicine. In the last decade 3D imaging became popular mainly driven by the introduction of novel 3D cameras and measuring devices. These cameras are usually limited to indoor scenes with relatively low distances. Benjamin Langmann introduces medium and long-range 2D/3D cameras to overcome these limitations. He reports measurement results for these devices and studies their characteristic behavior. In order to facilitate the application o

  19. THE REMOTE AND MOBILE AIR TRAFFIC CONTROL TOWER AND ITS POSSIBLE APPLICATION TO THE OPERATIONAL AREA

    Directory of Open Access Journals (Sweden)

    Tímea VAS

    2014-10-01

    Full Text Available The concept of remote and mobile Air Traffic Control Tower (ATC TWR and its development has started in Europe, Australia and also in the USA, in order to improve the efficiency of Air Traffic Management (ATM systems in terms of air transportation safety. These new technologies are applicable in many countries in peace time, but on mobility reasons these are promoted to achieve commitments in the operational area. This article describes the devices and range of equipment of mobile and remote tower, and their specifications, which can even serve a medium sized airport, furthermore examines, whether how can those provide the air traffic services at an operational airfield.

  20. The application of PSA techniques to the vital area identification of nuclear power plants

    International Nuclear Information System (INIS)

    Ha, Jae Joo; Jung, Woo Sik; Park, Chang Kue

    2005-01-01

    This paper presents a Vital Area Identification (VAI) method based on the current Fault Tree Analysis (FTA) and Probabilistic Safety Assessment (PSA) techniques for the physical protection of nuclear power plants. A structured framework of a Top Event Prevention set Analysis (TEPA) application to the VAI of nuclear power plants is also delineated. One of the important processes for physical protection in a nuclear power plant is VIA that is a process for identifying areas containing nuclear materials, Structures, Systems or Components (SSCs) to be protected from sabotage, which could directly or indirectly lead to core damage and unacceptable radiological consequences. A software VIP (Vital area Identification Package based on the PSA method) is being developed by KAERI for the VAI of nuclear power plants. Furthermore, the KAERI fault tree solver FTREX (Fault Tree Reliability Evaluation eXpert) is specialized for the VIP to generate the candidates of the vital areas. FTREX can generate numerous MCSs for a huge fault tree with the lowest truncation limit and all possible prevention sets

  1. Application and analysis of debris-flow early warning system in Wenchuan earthquake-affected area

    Science.gov (United States)

    Liu, D. L.; Zhang, S. J.; Yang, H. J.; Zhao, L. Q.; Jiang, Y. H.; Tang, D.; Leng, X. P.

    2016-02-01

    The activities of debris flow (DF) in the Wenchuan earthquake-affected area significantly increased after the earthquake on 12 May 2008. The safety of the lives and property of local people is threatened by DFs. A physics-based early warning system (EWS) for DF forecasting was developed and applied in this earthquake area. This paper introduces an application of the system in the Wenchuan earthquake-affected area and analyzes the prediction results via a comparison to the DF events triggered by the strong rainfall events reported by the local government. The prediction accuracy and efficiency was first compared with a contribution-factor-based system currently used by the weather bureau of Sichuan province. The storm on 17 August 2012 was used as a case study for this comparison. The comparison shows that the false negative rate and false positive rate of the new system is, respectively, 19 and 21 % lower than the system based on the contribution factors. Consequently, the prediction accuracy is obviously higher than the system based on the contribution factors with a higher operational efficiency. On the invitation of the weather bureau of Sichuan province, the authors upgraded their prediction system of DF by using this new system before the monsoon of Wenchuan earthquake-affected area in 2013. Two prediction cases on 9 July 2013 and 10 July 2014 were chosen to further demonstrate that the new EWS has high stability, efficiency, and prediction accuracy.

  2. Factors influencing chloride deposition in a coastal hilly area and application to chloride deposition mapping

    Directory of Open Access Journals (Sweden)

    H. Guan

    2010-05-01

    Full Text Available Chloride is commonly used as an environmental tracer for studying water flow and solute transport in the environment. It is especially useful for estimating groundwater recharge based on the commonly used chloride mass balance (CMB method. Strong spatial variability in chloride deposition in coastal areas is one difficulty encountered in appropriately applying the method. A high-resolution bulk chloride deposition map in the coastal region is thus needed. The aim of this study is to construct a chloride deposition map in the Mount Lofty Ranges (MLR, a coastal hilly area of approximately 9000 km2 spatial extent in South Australia. We examined geographic (related to coastal distance, orographic, and atmospheric factors that may influence chloride deposition, using partial correlation and regression analyses. The results indicate that coastal distance, elevation, as well as terrain aspect and slope, appear to be significant factors controlling chloride deposition in the study area. Coastal distance accounts for 70% of spatial variability in bulk chloride deposition, with elevation, terrain aspect and slope an additional 15%. The results are incorporated into a de-trended residual kriging model (ASOADeK to produce a 1 km×1 km resolution bulk chloride deposition and concentration maps. The average uncertainty of the deposition map is about 20–30% in the western MLR, and 40–50% in the eastern MLR. The maps will form a useful basis for examining catchment chloride balance for the CMB application in the study area.

  3. Wavy channel Thin Film Transistor for area efficient, high performance and low power applications

    KAUST Repository

    Hanna, Amir

    2014-06-01

    We report a new Thin Film Transistor (TFT) architecture that allows expansion of the device width using wavy (continuous without separation) fin features - termed as wavy channel (WC) architecture. This architecture allows expansion of transistor width in a direction perpendicular to the substrate, thus not consuming extra chip area, achieving area efficiency. The devices have shown for a 13% increase in the device width resulting in a maximum 2.4x increase in \\'ON\\' current value of the WCTFT, when compared to planar devices consuming the same chip area, while using atomic layer deposition based zinc oxide (ZnO) as the channel material. The WCTFT devices also maintain similar \\'OFF\\' current value, similar to 100 pA, when compared to planar devices, thus not compromising on power consumption for performance which usually happens with larger width devices. This work offers a pragmatic opportunity to use WCTFTs as backplane circuitry for large-area high-resolution display applications without any limitation any TFT materials.

  4. Application of Poisson kriging to the mapping of cholera and dysentery incidence in an endemic area of Bangladesh

    Directory of Open Access Journals (Sweden)

    Haq M Zahirul

    2006-10-01

    Full Text Available Abstract Background Disease maps can serve to display incidence rates geographically, to inform on public health provision about the success or failure of interventions, and to make hypothesis or to provide evidences concerning disease etiology. Poisson kriging was recently introduced to filter the noise attached to rates recorded over sparsely populated administrative units. Its benefit over simple population-weighted averages and empirical Bayesian smoothers was demonstrated by simulation studies using county-level cancer mortality rates. This paper presents the first application of Poisson kriging to the spatial interpolation of local disease rates, resulting in continuous maps of disease rate estimates and the associated prediction variance. The methodology is illustrated using cholera and dysentery data collected in a cholera endemic area (Matlab of Bangladesh. Results The spatial analysis was confined to patrilineally-related clusters of households, known as baris, located within 9 kilometers from the Matlab hospital to avoid underestimating the risk of disease incidence, since patients far away from the medical facilities are less likely to travel. Semivariogram models reveal a range of autocorrelation of 1.1 km for dysentery and 0.37 km for cholera. This result translates into a cholera risk map that is patchier than the dysentery map that shows a large zone of high incidence in the south-central part of the study area, which is quasi-urban. On both maps, lower risk values are found in the Northern part of the study area, which is also the most distant from the Matlab hospital. The weaker spatial continuity of cholera versus dysentery incidence rates resulted in larger kriging variance across the study area. Conclusion The approach presented in this paper enables researchers to incorporate the pattern of spatial dependence of incidence rates into the mapping of risk values and the quantification of the associated uncertainty. Differences

  5. Soil physical indicators of management systems in traditional agricultural areas under manure application

    Directory of Open Access Journals (Sweden)

    Luiz Paulo Rauber

    Full Text Available ABSTRACT Studies of the successive application of manure as fertilizer and its combined effect with long-term soil management systems are important to the identification of the interdependence of physical attributes. The aim of this study was to evaluate changes in the physical properties of a Rhodic Kandiudox under management systems employing successive applications of pig slurry and poultry litter, and select physical indicators that distinguish these systems using canonical discriminant analysis (CDA. The systems consisting of treatments including land use, management and the application time of organic fertilizers are described as follows: silage maize under no-tillage (NT-M7 years; silage maize under conventional tillage (CT-M20 years; annual pasture with chisel plowing (CP-P3 years; annual pasture with chisel plowing (CP-P15 years; perennial pasture without tillage (NT-PP20 years; and no-tillage yerba mate (NT-YM20 years and were compared with native forest (NF and native pasture (NP. Soil samples were collected from the layers at the following depths: 0.0-0.05, 0.05-0.10, and 0.10-0.20 m, and were analyzed for bulk density, porosity, aggregation, flocculation, penetration resistance, water availability and total clay content. Canonical discriminant analysis was an important tool in the study of physical indicators of soil quality. Organic fertilization, along with soil management, influences soil structure and its porosity. Total porosity was the most important physical property in the distinction of areas with management systems and application times of manure for the 0.0-0.05 and 0.10-0.20 m layers. Soil aeration and micropores differentiated areas in the 0.05-0.10 m layer. Animal trampling and machinery traffic were the main factors inducing compaction of this clayey soil.

  6. The use of labelled nitrogen for studying wheat fertilizer application under rain fed area

    International Nuclear Information System (INIS)

    Thabet, E.M.A.; Zapata, F.; Moutonnel, P.

    1999-01-01

    A Field experiment was conducted in the IAEA agricultural field in Seibersdorf, austria, during 1995 growing season. Wheat grains of Astrodur variety were planted in the field using seed drill at rate of 300 plants/m 2 . The experimental block has a size of 1.25 m.x 7.5 m. randomized complete block design with six replications was used. Each block include two fertilization rates (100 and 50 kg. N/ha.) and three different harvesting samples (67, 100 and 124 DAP). The applications were giver in two split applications. N 1 5 labelled fertilizer (2.59% atom excess) was only used for 100 kg. N/ha. Rainfall was measured along the season and then calculated as amount of cubic meters per hecater in different respective periods. The obtained results indicated that dry matter yield kg. /ha., water use efficiency (WUE), N-utilized % chlorophyll content and yield and yield components of wheat under rain fed area significantly increased for the application of the recommended nitrogen rate (100 kg. N/ha.) at different wheat growth stages as compared to nitrogen rat of 50 kg. N/ ha. It is obvious that the addition of nitrogen have a strong relation with water applied in rain fed area. So that the application of nitrogen showed split more than two times to avoid leaching and to be utilized by wheat under rain fed conditions. Moreover, the nitrogen applied should be not less than the recommended rate which was 100 kg. N/ha. as ammonium sulphate

  7. 42 CFR Appendix B to Part 5 - Criteria for Designation of Areas Having Shortages of Dental Professional(s)

    Science.gov (United States)

    2010-10-01

    ... socioeconomic or demographic structure and/or a traditional of interaction or intradependency), have limited... area. (b) Migratory workers and their families may be included in an area's population using the... and socioeconomic characteristics of the population) do not prevent the population from receiving care...

  8. User's guide to image processing applications of the NOAA satellite HRPT/AVHRR data. Part 1: Introduction to the satellite system and its applications. Part 2: Processing and analysis of AVHRR imagery

    Science.gov (United States)

    Huh, Oscar Karl; Leibowitz, Scott G.; Dirosa, Donald; Hill, John M.

    1986-01-01

    The use of NOAA Advanced Very High Resolution Radar/High Resolution Picture Transmission (AVHRR/HRPT) imagery for earth resource applications is provided for the applications scientist for use within the various Earth science, resource, and agricultural disciplines. A guide to processing NOAA AVHRR data using the hardware and software systems integrated for this NASA project is provided. The processing steps from raw data on computer compatible tapes (1B data format) through usable qualitative and quantitative products for applications are given. The manual is divided into two parts. The first section describes the NOAA satellite system, its sensors, and the theoretical basis for using these data for environmental applications. Part 2 is a hands-on description of how to use a specific image processing system, the International Imaging Systems, Inc. (I2S) Model 75 Array Processor and S575 software, to process these data.

  9. The Combined ASTER MODIS Emissivity over Land (CAMEL Part 1: Methodology and High Spectral Resolution Application

    Directory of Open Access Journals (Sweden)

    E. Eva Borbas

    2018-04-01

    Full Text Available As part of a National Aeronautics and Space Administration (NASA MEaSUREs (Making Earth System Data Records for Use in Research Environments Land Surface Temperature and Emissivity project, the Space Science and Engineering Center (UW-Madison and the NASA Jet Propulsion Laboratory (JPL developed a global monthly mean emissivity Earth System Data Record (ESDR. This new Combined ASTER (Advanced Spaceborne Thermal Emission and Reflection Radiometer and MODIS (Moderate Resolution Imaging Spectroradiometer Emissivity over Land (CAMEL ESDR was produced by merging two current state-of-the-art emissivity datasets: the UW-Madison MODIS Infrared emissivity dataset (UW BF and the JPL ASTER Global Emissivity Dataset Version 4 (GEDv4. The dataset includes monthly global records of emissivity and related uncertainties at 13 hinge points between 3.6–14.3 µm, as well as principal component analysis (PCA coefficients at 5-km resolution for the years 2000 through 2016. A high spectral resolution (HSR algorithm is provided for HSR applications. This paper describes the 13 hinge-points combination methodology and the high spectral resolutions algorithm, as well as reports the current status of the dataset.

  10. Decision Threshold and Detection Limit in Spectrometric Measurements. Part 1: Application to Gamma Spectrometry

    International Nuclear Information System (INIS)

    Perez, C.; Gasco, C.; Lopez, M. A.

    2010-01-01

    This report summarised the author's lecture of the advanced gamma spectrometry course organised by CIEMAT. The characteristic limits determination in gamma spectrometry generally is obtained through the programming that the trade marks offers to the client with the objective of the automatic calculation of the activity concentrations existing in a sample. In this report, the examples shown in the ISO 11929 standard are compared to the programming realised by Genie 2k for determining characteristic limits. The main difference of both is located in the uncertainty calculations due to the efficiency calibration that is considered by ISO and not by Genie 2K. Through implementation in the software developed by trade marks will be possible to introduce this uncertainty and to assimilate to the calculation done by ISO 11929. In the second part of this report will be analyzed the more complicated samples of this application as counting in a whole body counter (following ISO-28218 about Performance Criteria for radio bioassay), multiplet, overlapping, addition of several peaks for obtaining the activity concentration, etc. (Author) 19 refs.

  11. The Application Study in Solar Energy Technology for Highway Service Area: A Case Study of West Lushan Highway Low-Carbon Service Area in China

    Directory of Open Access Journals (Sweden)

    Xiaochun Qin

    2015-01-01

    Full Text Available A lot of research works have been made concerning highway service area or solar technology and acquired great achievements. However, unfortunately, few works have been made combining the two topics together of highway service areas and solar energy saving to make a systemic research on solar technology application for highway service area. In this paper, taking West Lushan highway low-carbon service area in Jiangxi Province of China as the case study, the advantages, technical principles, and application methods of solar energy technology for highway service area including solar photoelectric technology and solar water heating technology were discussed based on the analysis of characteristics of highway low-carbon service area; the system types, operation mode, and installing tilt angle of the two kinds of solar systems suitable for highway service areas were confirmed. It was proved that the reduction of the cost by electricity savings of solar system was huge. Taking the investment of the solar systems into account, the payback period of solar photoelectric systems and solar water heating systems was calculated. The economic effect of the solar systems in West Lushan highway service area during the effective operation periods was also calculated and proved very considerable.

  12. Competitive policies in the Nordic energy research and innovation area - eNERGIA : Part 1: Country reports

    Energy Technology Data Exchange (ETDEWEB)

    Klitkou, Antje; Pedersen, Trond Einar; Scordato, Lisa; Mariussen, Aage

    2008-07-01

    This (Part 1: Country reports) is the first report about the results from the eNERGIA project. The second report mainly deals with selected renewable energy technologies from different perspectives, while the third report sums up the SWOT-analysis, the eNERGIA workshops and the case studies of good practice. A short synthesis report summarises the entire project. This first report is the presentation of the countries studied in the project - Denmark, Finland, Iceland, Norway, Sweden, Estonia, Latvia and Lithuania. The policy system and the political framework conditions that underpin energy related industrial activity are reviewed for each country. This includes energy strategies, laws and regulations, R&D and innovation policies and instruments, and international collaboration. Key actors and institutions in the public domain, research and education, and non-governmental organisations are mapped. Finally, the descriptions of the countries include also technology specific overviews of R&D-intensive firms in the energy sector. The report comprises three parts: Part 1: Country reports Part 2: Technology reports Part 3: Special reports The results are summarised in the Synthesis report. (Author). refs., 24 figs., 49 tabs

  13. 47 CFR 80.3 - Other applicable rule parts of this chapter.

    Science.gov (United States)

    2010-10-01

    ..., agreements, and treaties. This part also contain standards and procedures concerning marketing of radio... governs commercial mobile radio services which include subpart J of this part (public coast stations). (g...

  14. Human – Computer Systems Interaction Backgrounds and Applications 2 Part 1

    CERN Document Server

    Kulikowski, Juliusz; Mroczek, Teresa

    2012-01-01

    The main contemporary human-system interaction (H-SI) problems consist in design and/or improvement of the tools for effective exchange of information between individual humans or human groups and technical systems created for humans aiding in reaching their vital goals. This book is a second issue in a series devoted to the novel in H-SI results and contributions reached for the last years by many research groups in European and extra-European countries. The preliminary (usually shortened) versions of the chapters  were presented as conference papers at the 3rd International Conference on H-SI held in Rzeszow, Poland, in 2010. A  large number of valuable papers  selected for publication caused a necessity to publish the book in two volumes. The given, 1st Volume  consists of sections devoted to: I. Decision Supporting Systems, II. Distributed Knowledge Bases and WEB Systems and III. Impaired Persons  Aiding Systems. The decision supporting systems concern various application areas, like enterprises mana...

  15. Spatial variability of soil potassium in sugarcane areas subjected to the application of vinasse

    Directory of Open Access Journals (Sweden)

    LAÉRCIO A. DE CARVALHO

    2014-12-01

    Full Text Available When deposited on land the vinasse can promote improvement in fertility, however, often fertilizer application occurs in areas considered homogeneous, without taking into account the variability of the soil. The objective of this study was to evaluate the effect of vinasse application on potassium content in two classes of soils cultivated with sugarcane, and characterize the spatial variability of soil using geostatistical techniques. In the 2010 and 2011 crop year, soil samples were collected from an experimental grid at 0-0.2 and 0.2-0.4 m depth in three soils cultivated with sugarcane, totaling 90 samplings in each grid, for the determination of pH, calcium (Ca, magnesium (Mg, potassium (K, phosphorus (P, aluminum (Al and potential acidity (H + Al. The data have been submitted to analysis of descriptive statistics and the K attribute was subjected to geostatistical analysis. The coefficient of variation indicated medium and high variability of K for the three soils. The results showed that the spatial dependence of K increased in depth to FRce and decreased to PHlv, indicating that the attribute could have followed the pattern of distribution of clay in depth. The investigation of the spatial variability of K on the surface and subsurface soils provided the definition of management zones with different levels of fertility, which can be organized into sub-areas for a more efficient management of the resources and the environment.

  16. Application of perturbed angular correlations to chemistry and related areas of solid state physics

    Energy Technology Data Exchange (ETDEWEB)

    Rinneberg, H H [Freie Univ. Berlin (Germany, F.R.)

    1979-06-01

    The paper reviews the more recent applications of ..gamma..-..gamma.. time-differential perturbed angular correlation (TDPAC) to chemistry and related areas of solid state physics. Topics which are discussed in some detail include: Supertransferred hyperfine fields at diamagnetic impurities in antiferromagnetic transition metal compounds and their relation to the covalency of the transition metal-ligand bond; effects of charge transfer on the quadrupole interactions in various partially covalent insulators measured by PAC; fluctuating electric field gradients in heptafluorohafnates; the influence of charge density waves in TaS/sub 2/ and the effect of intercalating on the field gradients at /sup 181/Ta; recent advances in the understanding of electric field gradients in metals; information obtained by PAC on the microscopic structure of alloys as well as defects in pure metals after quenching, implantation or irradiation. Magnetic and electric phase transitions observed in PAC spectra are briefly mentioned. In addition, recent measurements in liquids and gases are reviewed. Three introductory sections are devoted to a brief discussion of the time-differential PAC technique, to a concise explanation of the theoretical expressions needed to analyse PAC spectra and to a short description of the experimental set-up. An outlook suggests some areas of possible future applications.

  17. Reconfigurable antenna options for 2.45/5 GHz wireless body area networks in healthcare applications.

    Science.gov (United States)

    Abbas, Syed Muzahir; Ranga, Yogesh; Esselle, Karu P

    2015-01-01

    This paper presents electronically reconfigurable antenna options in healthcare applications. They are suitable for wireless body area network devices operating in the industrial, scientific, and medical (ISM) band at 2.45 GHz and IEEE 802.11 Wireless Local Area Network (WLAN) band at 5 GHz (5.15-5.35 GHz, 5.25-5.35 GHz). Two types of antennas are investigated: Antenna-I has a full ground plane and Antenna-II has a partial ground plane. The proposed antennas provide ISM operation in one mode while in another mode they support 5 GHz WLAN band. Their performance is assessed for body centric wireless communication using a simplified human body model. Antenna sensitivity to the gap between the antenna and the human body is investigated for both modes of each antenna. The proposed antennas exhibit a wide radiation pattern along the body surface to provide wide coverage and their small width (14 mm) makes them suitable for on-body communication in healthcare applications.

  18. Application of risk based inspection as a part of life management of nuclear power plants

    International Nuclear Information System (INIS)

    Vinod, Gopika; Babar, A.K.; Saraf, R.K.; Kushwaha, H.S.; Venkat Raj, V.

    2002-01-01

    Importance, Inspection Importance measure etc. are employed for prioritisation of systems as well as components for In-Service Inspection. After the identification of the critical systems/components, Failure Mode Effect Analysis (FMEA) is carried out for each piping segment. It is essential to identify the prominent failure modes and causes in order to establish the inspection items. Risk Matrix is designed with different categories, depending on the CDF values and degradation mechanisms for determining the inspection interval. Each segment is assigned the appropriate category depending on its effect on change in CDF and degradation mechanisms. Since inspection will be planned on segments based on its contribution towards risk, an optimal utilisation of inspection resource could be ensured. Again another outcome of failure probability estimation is the assessment of residual life depending on crack growth phenomena which can be modelled using fracture mechanics methodology. Various aspects are involved like operating history, inspection results etc. which can change the failure probability values and subsequently the risk ranking. Pilot studies have been conducted to apply Risk Informed In-Service Inspection on a typical Indian PHWR. Risk Ranking of systems has been done based on importance measures. Also Risk Matrix has been applied to rank various piping segments for inspection. As a part of this analysis, a software has been developed to carry out these studies. This paper discusses in detail the application of Risk informed In-service Inspection on a typical Indian PHWR and presents the features of the software. (author)

  19. PART I: Bioventing Pilot Test Work Plan for Fire Protection Training Area Site FY-03, Charleston AFB, South Carolina. PART II: Draft Interim Pilot Test Results Report for Fire Protection Training Area Site FT-03, Charleston AFB, South Carolina

    National Research Council Canada - National Science Library

    1993-01-01

    This site-specific work plan presents the scope of a bioventing pilot test for in situ treatment of fuel contaminated soils at the Fire Protection Training Area designated as Site FT-O3, Charleston Air Force Base (AFB), South Carolina...

  20. Ionic liquids for nano- and microstructures preparation. Part 2: Application in synthesis.

    Science.gov (United States)

    Łuczak, Justyna; Paszkiewicz, Marta; Krukowska, Anna; Malankowska, Anna; Zaleska-Medynska, Adriana

    2016-01-01

    Ionic liquids (ILs) are widely applied to prepare metal nanoparticles and 3D semiconductor microparticles. Generally, they serve as a structuring agent or reaction medium (solvent), however it was also demonstrated that ILs can play a role of a co-solvent, metal precursor, reducing as well as surface modifying agent. The crucial role and possible types of interactions between ILs and growing particles have been presented in the Part 1 of this review paper. Part 2 of the paper gives a comprehensive overview of recent experimental studies dealing with application of ionic liquids for preparation of metal and semiconductor based nano- and microparticles. A wide spectrum of preparation routes using ionic liquids is presented, including precipitation, sol-gel technique, hydrothermal method, nanocasting and ray-mediated methods (microwave, ultrasound, UV-radiation and γ-radiation). It was found that ionic liquids formed of a 1-butyl-3-methylimidazolium [BMIM] combined with tetrafluoroborate [BF4], hexafluorophosphate [PF6], and bis(trifluoromethanesulfonyl)imide [Tf2N] are the most often used ILs in the synthesis of nano- and microparticles, due to their low melting temperature, low viscosity and good transportation properties. Nevertheless, examples of other IL classes with intrinsic nanoparticles stabilizing abilities such as phosphonium and ammonium derivatives are also presented. Experimental data revealed that structure of ILs (both anion and cation type) affects the size and shape of formed metal particles, and in some cases may even determine possibility of particles formation. The nature of the metal precursor determines its affinity to polar or nonpolar domains of ionic liquid, and therefore, the size of the nanoparticles depends on the size of these regions. Ability of ionic liquids to form varied extended interactions with particle precursor as well as other compounds presented in the reaction media (water, organic solvents etc.) provides nano- and

  1. Generating a quality management system for application in the field of management of nuclear energy area

    International Nuclear Information System (INIS)

    Fernández, L.; Arias, M.

    2013-01-01

    The actual work has as a main objective to present the development of a quality management system to be applicable to the Nuclear Energy Management confines at the National Atomic Energy Commission (CNEA) in Argentina Republic. The GAEN Quality Management Section (SGC) has as main central tasks to streamline, collaborate and facilitate the development of activities and their applications on quality management systems in all the sections and projects belonging to GAEN. This achievement will tend to accredit, certificate and qualify them. Groups of work cooperating with each other integrate the GAEN. They are at present dealing with several tasks. Some outstanding ones are research activities, technology development, design, engineering, assembling, starting, services, and human resources development on Nuclear Reactors and Nuclear Supplies, particularly on powerful nuclear reactors. In 2012, at the annual CNEA Presidential meeting, it was presented one of the several projects from the SGC. It consists in the development of a quality management system available to every area belonging to the GAEN. To carry this project out, it was first begun with the elaboration of Guide Documents which were available for everybody. The documents establish the criteria and general requirements for obtaining guaranteed quality results about the performed activities. At the same time, several areas, sections and Management groups of work have been working united and well-disposed towards the application on their own Management System using the Guide Documents and considering, in addition, some own regards. In conclusion, this first step shows that the developed work facilitates the implementation of Management Systems around the GAEN. (author)

  2. Autonomous distributed temperature sensing for long-term heated applications in remote areas

    Directory of Open Access Journals (Sweden)

    A.-M. Kurth

    2013-02-01

    Full Text Available Distributed temperature sensing (DTS is a fiber-optical method enabling simultaneous temperature measurements over long distances. Electrical resistance heating of the metallic components of the fiber-optic cable provides information on the thermal characteristics of the cable's environment, providing valuable insight into processes occurring in the surrounding medium, such as groundwater–surface water interactions, dam stability or soil moisture. Until now, heated applications required direct handling of the DTS instrument by a researcher, rendering long-term investigations in remote areas impractical due to the often difficult and time-consuming access to the field site. Remote control and automation of the DTS instrument and heating processes, however, resolve the issue with difficult access. The data can also be remotely accessed and stored on a central database. The power supply can be grid independent, although significant infrastructure investment is required here due to high power consumption during heated applications. Solar energy must be sufficient even in worst case scenarios, e.g. during long periods of intense cloud cover, to prevent system failure due to energy shortage. In combination with storage batteries and a low heating frequency, e.g. once per day or once per week (depending on the season and the solar radiation on site, issues of high power consumption may be resolved. Safety regulations dictate adequate shielding and ground-fault protection, to safeguard animals and humans from electricity and laser sources. In this paper the autonomous DTS system is presented to allow research with heated applications of DTS in remote areas for long-term investigations of temperature distributions in the environment.

  3. Application of blocking diagnosis methods to general circulation models. Part I: a novel detection scheme

    Energy Technology Data Exchange (ETDEWEB)

    Barriopedro, D. [Universidade de Lisboa, CGUL-IDL, Faculdade de Ciencias, Ed. C-8, Lisbon (Portugal); Universidad de Extremadura, Departamento de Fisica, Facultad de Ciencias, Badajoz (Spain); Garcia-Herrera, R. [Universidad Complutense de Madrid, Departamento de Fisica de la Tierra II, Facultad de C.C. Fisicas, Madrid (Spain); Trigo, R.M. [Universidade de Lisboa, CGUL-IDL, Faculdade de Ciencias, Ed. C-8, Lisbon (Portugal)

    2010-12-15

    This paper aims to provide a new blocking definition with applicability to observations and model simulations. An updated review of previous blocking detection indices is provided and some of their implications and caveats discussed. A novel blocking index is proposed by reconciling two traditional approaches based on anomaly and absolute flows. Blocks are considered from a complementary perspective as a signature in the anomalous height field capable of reversing the meridional jet-based height gradient in the total flow. The method succeeds in identifying 2-D persistent anomalies associated to a weather regime in the total flow with blockage of the westerlies. The new index accounts for the duration, intensity, extension, propagation, and spatial structure of a blocking event. In spite of its increased complexity, the detection efficiency of the method is improved without hampering the computational time. Furthermore, some misleading identification problems and artificial assumptions resulting from previous single blocking indices are avoided with the new approach. The characteristics of blocking for 40 years of reanalysis (1950-1989) over the Northern Hemisphere are described from the perspective of the new definition and compared to those resulting from two standard blocking indices and different critical thresholds. As compared to single approaches, the novel index shows a better agreement with reported proxies of blocking activity, namely climatological regions of simultaneous wave amplification and maximum band-pass filtered height standard deviation. An additional asset of the method is its adaptability to different data sets. As critical thresholds are specific of the data set employed, the method is useful for observations and model simulations of different resolutions, temporal lengths and time variant basic states, optimizing its value as a tool for model validation. Special attention has been paid on the devise of an objective scheme easily applicable

  4. Mobile applications as a promotional tool of a tourist offer in protected areas

    Directory of Open Access Journals (Sweden)

    Mišković Ivana

    2015-01-01

    Full Text Available The rapid development of information and communications technology (ICT in recent decades has resulted not only in drastic increase in speed of the information flow, but also in the number of users of mobile devices. This trend has been recognized and used by many industries, including tourism. The use of specialized application software, compatible with the modern 'smartphones', the interaction between tourists and tourist destinations received a whole new dimension. This article aims at analyzing the ways in which the two seemingly incompatible concepts - tourism in protected nature and advanced communication technologies - can complement each other in order to create, improve and promote ecotourism products. Furthermore, it will analyze the latest trends in the development of mobile applications used in tourism industry and present examples of good practice in protected areas in Serbia and abroad. Due to the fact that mobile applications and technological innovations are relatively new and so far very few re­searchers have involved in the research of their effects on the users' satisfaction and their behavior, this paper will give guidelines for future research on this topic.

  5. Bend-insensitive single-mode photonic crystal fiber with ultralarge effective area for dual applications

    Science.gov (United States)

    Islam, Md. Asiful; Alam, M. Shah

    2013-05-01

    A novel photonic crystal fiber (PCF) having circular arrangement of cladding air holes has been designed and numerically optimized to obtain a bend insensitive single mode fiber with large mode area for both wavelength division multiplexing (WDM) communication and fiber-to-the-home (FTTH) application. The bending loss of the proposed bent PCF lies in the range of 10-3 to 10-4 dB/turn or lower over 1300 to 1700 nm, and 2 × 10-4 dB/turn at the wavelength of 1550 nm for a 30-mm bend radius with a higher order mode (HOM) cut-off frequency below 1200 nm for WDM application. When the whole structure of the PCF is scaled down, a bending loss of 6.78×10-4 dB/turn at 1550 nm for a 4-mm bend radius is obtained, and the loss remains in the order of 10-4 dB/turn over the same range of wavelength with an HOM cut-off frequency below 700 nm, and makes the fiber useful for FTTH applications. Furthermore, this structure is also optimized to show a splice loss near zero for fusion-splicing to a conventional single-mode fiber (SMF).

  6. Grid-optimized Web 3D applications on wide area network

    Science.gov (United States)

    Wang, Frank; Helian, Na; Meng, Lingkui; Wu, Sining; Zhang, Wen; Guo, Yike; Parker, Michael Andrew

    2008-08-01

    Geographical information system has come into the Web Service times now. In this paper, Web3D applications have been developed based on our developed Gridjet platform, which provides a more effective solution for massive 3D geo-dataset sharing in distributed environments. Web3D services enabling web users could access the services as 3D scenes, virtual geographical environment and so on. However, Web3D services should be shared by thousands of essential users that inherently distributed on different geography locations. Large 3D geo-datasets need to be transferred to distributed clients via conventional HTTP, NFS and FTP protocols, which often encounters long waits and frustration in distributed wide area network environments. GridJet was used as the underlying engine between the Web 3D application node and geo-data server that utilizes a wide range of technologies including the one of paralleling the remote file access, which is a WAN/Grid-optimized protocol and provides "local-like" accesses to remote 3D geo-datasets. No change in the way of using software is required since the multi-streamed GridJet protocol remains fully compatible with existing IP infrastructures. Our recent progress includes a real-world test that Web3D applications as Google Earth over the GridJet protocol beats those over the classic ones by a factor of 2-7 where the transfer distance is over 10,000 km.

  7. Mapping urban climate zones and quantifying climate behaviors--an application on Toulouse urban area (France).

    Science.gov (United States)

    Houet, Thomas; Pigeon, Grégoire

    2011-01-01

    Facing the concern of the population to its environment and to climatic change, city planners are now considering the urban climate in their choices of planning. The use of climatic maps, such Urban Climate Zone‑UCZ, is adapted for this kind of application. The objective of this paper is to demonstrate that the UCZ classification, integrated in the World Meteorological Organization guidelines, first can be automatically determined for sample areas and second is meaningful according to climatic variables. The analysis presented is applied on Toulouse urban area (France). Results show first that UCZ differentiate according to air and surface temperature. It has been possible to determine the membership of sample areas to an UCZ using landscape descriptors automatically computed with GIS and remote sensed data. It also emphasizes that climate behavior and magnitude of UCZ may vary from winter to summer. Finally we discuss the influence of climate data and scale of observation on UCZ mapping and climate characterization. Copyright © 2011 Elsevier Ltd. All rights reserved.

  8. Applicability of two mobile analysers for mercury in urine in small-scale gold mining areas.

    Science.gov (United States)

    Baeuml, Jennifer; Bose-O'Reilly, Stephan; Lettmeier, Beate; Maydl, Alexandra; Messerer, Katalin; Roider, Gabriele; Drasch, Gustav; Siebert, Uwe

    2011-12-01

    Mercury is still used in developing countries to extract gold from the ore in small-scale gold mining areas. This is a major health hazard for people living in mining areas. The concentration of mercury in urine was analysed in different mining areas in Zimbabwe, Indonesia and Tanzania. First the urine samples were analysed by CV-AAS (cold vapour atomic absorption spectrometry) during the field projects with a mobile mercury analyser (Lumex(®) or Seefelder(®)) and secondly, in a laboratory with a stationary CV-AAS mercury analyser (PerkinElmer(®)). Caused by the different systems (reduction agent either SnCl(2) (Lumex(®) or Seefelder(®))) or NaBH(4) (PerkinElmer(®)), with the mobile analysers only the inorganic mercury was obtained and with the stationary system the total mercury concentration was measured. The aims of the study were whether the results obtained in field with the mobile equipments can be compared with the stationary reference method in the laboratory and allow the application of these mobile analysers in screening studies on concerned populations to select those, who are exposed to critical mercury levels. Overall, the concentrations obtained with the two mobile systems were approximately 25% lower than determined with the stationary system. Nevertheless, both mobile systems seem to be very useful for screening of volunteers in field. Moreover, regional staff may be trained on such analysers to perform screening tests by themselves. Copyright © 2011 Elsevier GmbH. All rights reserved.

  9. Web Application for Coastal Area Planning through Analysis of Landslide and Soil Consumption

    Science.gov (United States)

    Panizzoni, Giulio; Debiasi, Alberto; Eccher, Matteo; De Amicis, Raffaele

    2016-04-01

    Global warming and rapid climatic changes are producing dramatic effects on coastal area of Mediterranean countries. Italian coastal areas are one of the most urbanized zones of the south western Europe and the extensive use of soil is causing a consistent impact on the hydrogeological context. Moreover, soil consumption combined with extreme meteorological events, facilitates the occurrence of hazardous landslide events. Environmental policy makers and data managers in territorial planning need to face such emergency situation with appropriate tools. We present an application service with the aim of advising user through environmental analysis of Landslide and Soil Consumption impact. This service wants also to improve the sharing of environmental harmonized datasets/metadata across different organizations and the creation of a collaborative environment where the stakeholders and environmental experts can share their data and work cooperatively. We developed a set of processing services providing functionalities to assess impact of landslide on territory and impact of land take and soil sealing. Among others, the service is able to evaluate environmental impacts of landslide events on Cultural Heritage sites. We have also designed a 3D WebGL client customized to execute the processing services and visualize their outputs. It provides high usability in terms of navigation and data visualization. In this way the service provides not only a Spatial Data Infrastructure to access and visualize data but a complete Decision Support Systems for a more effective environmental planning of coastal area.

  10. Heavy Precipitation impacts and emergency planning - developing applicable strategies for a metropolitan area

    Science.gov (United States)

    Kutschker, Thomas; Glade, Thomas

    2016-04-01

    Heavy rainfall in central Europe is one of the assumed effects of climate change, which occurs with large seasonal and regional differences in its magnitude. The extent of loss depends on natural parameters (e.g. topography and vegetation) as well as on socio-economic factors like urbanized and industrialized areas and population density. Dangerous cascade effects appear, if critical infrastructure like the electrical power supply is affected. In some cases mudflows and flash floods cause inundated or undercut roads and cause a high demand for fast and effective assistance of the authorities. The civil protection in Germany is based on a federal system with a bottom-up command-structure and responsibility to the local community. Commonly this responsibility is taken by the fire brigades and civil protection units of the community or district. After heavy rainfall in an urban area, numerous incidents and emergency calls appearing at a time are overstressing the human and technical resources of the fire brigades within the local authority frequently. In this study, a method of comprehensive evaluation of meteorological data and the operation data from local fire brigades shall be developed for the Rhine-Main-Area in order to identify particular affected spots of heavy rain and bundle resources of the fire brigades. It is to be found out if the study area contains regions with a particularly high exposure to heavy rain and high application numbers of the fire department and whether there is a relationship of rainfall and frequency of use. To evaluate particular local effects on the fire brigades capability, a brief analysis of the meteorological data provided by the German Meteorological Service (DWD) as well as the evaluation of the incident data of the affected fire brigades, is used to frame a realistic approach. In particular fire brigade operation data can be used accordingly to describe the intensity of the aftermath when heavy precipitation strikes a certain

  11. UV imaging reveals facial areas that are prone to skin cancer are disproportionately missed during sunscreen application.

    Directory of Open Access Journals (Sweden)

    Harry Pratt

    Full Text Available Application of sunscreen is a widely used mechanism for protecting skin from the harmful effects of UV light. However, protection can only be achieved through effective application, and areas that are routinely missed are likely at increased risk of UV damage. Here we sought to determine if specific areas of the face are missed during routine sunscreen application, and whether provision of public health information is sufficient to improve coverage. To investigate this, 57 participants were imaged with a UV sensitive camera before and after sunscreen application: first visit; minimal pre-instruction, second visit; provided with a public health information statement. Images were scored using a custom automated image analysis process designed to identify areas of high UV reflectance, i.e. missed during sunscreen application, and analysed for 5% significance. Analyses revealed eyelid and periorbital regions to be disproportionately missed during routine sunscreen application (median 14% missed in eyelid region vs 7% in rest of face, p<0.01. Provision of health information caused a significant improvement in coverage to eyelid areas in general however, the medial canthal area was still frequently missed. These data reveal that a public health announcement-type intervention could be effective at improving coverage of high risk areas of the face, however high risk areas are likely to remain unprotected therefore other mechanisms of sun protection should be widely promoted such as UV blocking sunglasses.

  12. Part of the inter ministerial commission of artificial radioelements (cirea) in the areas of medicine, research and industry

    International Nuclear Information System (INIS)

    Fages, D.Ph.

    2000-01-01

    The Inter ministerial commission of artificial radioelements (C.I.R.E.A.) has been implemented to regulate the production, import, use of artificial radioelements. It gives advices in areas such preparation, import, export, fabrication, calibration, transport, transfer as well as the general conditions of use, the measures of protection against the effects of radiations. The commission is divided in two sections: for the first one, it treats the questions relative to medical practices and human biology, for the second one it treats questions relative to others areas( agriculture, industry, research else than medical one). (N.C.)

  13. Analysis of area events as part of probabilistic safety assessment for Romanian TRIGA SSR 14 MW reactor

    International Nuclear Information System (INIS)

    Mladin, D.; Stefan, I.

    2005-01-01

    The international experience has shown that the external events could be an important contributor to plant/ reactor risk. For this reason such events have to be included in the PSA studies. In the context of PSA for nuclear facilities, external events are defined as events originating from outside the plant, but with the potential to create an initiating event at the plant. To support plant safety assessment, PSA can be used to find methods for identification of vulnerable features of the plant and to suggest modifications in order to mitigate the impact of external events or the producing of initiating events. For that purpose, probabilistic assessment of area events concerning fire and flooding risk and impact is necessary. Due to the relatively large power level amongst research reactors, the approach to safety analysis of Romanian 14 MW TRIGA benefits from an ongoing PSA project. In this context, treatment of external events should be considered. The specific tasks proposed for the complete evaluation of area event analysis are: identify the rooms important for facility safety, determine a relative area event risk index for these rooms and a relative area event impact index if the event occurs, evaluate the rooms specific area event frequency, determine the rooms contribution to reactor hazard state frequencies, analyze power supply and room dependencies of safety components (as pumps, motor operated valves). The fire risk analysis methodology is based on Berry's method [1]. This approach provides a systematic procedure to carry out a relative index of different rooms. The factors, which affect the fire probability, are: personal presence in the room, number and type of ignition sources, type and area of combustibles, fuel available in the room, fuel location, and ventilation. The flooding risk analysis is based on the amount of piping in the room. For accuracy of the information regarding piping a facility walk-about is necessary. In case of flooding risk

  14. Central Asia in a Changing World: From a Peripheral Region to an Area of Policy Generation and Application. Actors, Policy and Security

    Directory of Open Access Journals (Sweden)

    Nora Sainz Gsell

    2005-10-01

    Full Text Available This work deals with Central Asia, beginning with an analysis of the characteristics of international insertion of the area as a whole and of the former Soviet republics that comprise it. In a general way, it aims to analyse the evolution of Central Asia from a peripheral region to an area that generates behaviours and receives the application of policies on the part ofinternational actors. In the first part of the study, it mentions a series of particularities of the republics that have determined the relationships in the region(the Central Asian order and those between the region and the outside world; it indicates geo-historical and economic-strategic aspects. In the second part, it examines the foreign policy of the republics in the post-Cold War era from the singularities of domestic policy. And, in the third part, it analyses, according to the aforementioned peculiarities, the policies that the area and each State has generated in international actors, both regional ones and global ones, and which have transformed the region from a peripheral one to a geopolitically emerging one.

  15. Clinical applications of single photon emission tomography in neuromedicine. Part 1. Neuro-oncology, epilepsy, movement disorders, cerebrovascular disease

    International Nuclear Information System (INIS)

    Bartenstein, P.; Gruenwald, F.; Kuwert, T.; Tatsch, K.; Sabri, O.; Benkert, O.; Fahlbusch, R.; Gruender, G.; Herzholz, K.; Weiller, C.

    2000-01-01

    Single photon emission tomography is, because of its availability and the relatively low costs, the functional imaging modality currently most widely used for clinical applications in the brain. Beside the application of radiopharmaceuticals for the assessment of regional cerebral blood flow there is an increasing clinical use of more selective SPECT-radiopharmaceuticals, like amino acid analogs or receptor ligands. This article gives in its first part a critical review of the clinical applications of SPECT in neuro-oncology, epilepsy, basal ganglia disorders and cerebrovascular disease. (orig.) [de

  16. Area Source Boiler National Emission Standards for Hazardous Air Pollutants (NESHAP), 40 CFR Part 63, Subpart JJJJJJ: Questions and Answers

    Science.gov (United States)

    This October 2016 question and answer (Q&A) document is in response to a number of questions the EPA has received from delegated state and local agencies and the regulated community regarding the NESHAP for Area source boilers. Document updates 4/2014 PDF.

  17. The indication area of a diagnostic test. Part I--discounting gain and loss in diagnostic certainty

    NARCIS (Netherlands)

    Stalpers, Lukas J. A.; Nelemans, Patty J.; Geurts, Sandra M. E.; Jansen, Erik; de Boer, Peter; Verbeek, André L. M.

    2015-01-01

    Test performance is conventionally expressed by gain in diagnostic certainty. We propose net diagnostic gain and indication area as more appropriate measures of test performance; then, the loss in certainty due to misclassification and the information of "no test" would be performed are taken into

  18. Revenues for Education in Metropolitan Areas. Chapter VI, Metropolitanism: Its Challenge to Education, 1968. Sixty-seventh Yearbook, Part I.

    Science.gov (United States)

    Alkin, Marvin C.

    For local school districts to provide equal educational opportunities throughout a metropolitan area, a school organization plan should distribute populations among districts in such a manner as to maximize the aggregate expressed demand for educational services and to provide relatively equal financial support. Consolidation of contiguous…

  19. Human arachnoid granulations Part I: a technique for quantifying area and distribution on the superior surface of the cerebral cortex

    Directory of Open Access Journals (Sweden)

    Holman David W

    2007-07-01

    Full Text Available Abstract Background The arachnoid granulations (AGs are herniations of the arachnoid membrane into the dural venous sinuses on the surface of the brain. Previous morphological studies of AGs have been limited in scope and only one has mentioned surface area measurements. The purpose of this study was to investigate the topographic distribution of AGs on the superior surface of the cerebral cortex. Methods En face images were taken of the superior surface of 35 formalin-fixed human brains. AGs were manually identified using Adobe Photoshop, with a pixel location containing an AG defined as 'positive'. A set of 25 standard fiducial points was marked on each hemisphere for a total of 50 points on each image. The points were connected on each hemisphere to create a segmented image. A standard template was created for each hemisphere by calculating the average position of the 25 fiducial points from all brains. Each segmented image was mapped to the standard template using a linear transformation. A topographic distribution map was produced by calculating the proportion of AG positive images at each pixel in the standard template. The AG surface area was calculated for each hemisphere and for the total brain superior surface. To adjust for different brain sizes, the proportional involvement of AGs was calculated by dividing the AG area by the total area. Results The total brain average surface area of AGs was 78.53 ± 13.13 mm2 (n = 35 and average AG proportional involvement was 57.71 × 10-4 ± 7.65 × 10-4. Regression analysis confirmed the reproducibility of AG identification between independent researchers with r2 = 0.97. The surface AGs were localized in the parasagittal planes that coincide with the region of the lateral lacunae. Conclusion The data obtained on the spatial distribution and en face surface area of AGs will be used in an in vitro model of CSF outflow. With an increase in the number of samples, this analysis technique can be used

  20. 10 CFR Appendix A to Part 603 - Applicable Federal Statutes, Executive Orders, and Government-wide Regulations

    Science.gov (United States)

    2010-01-01

    ... REGULATIONS TECHNOLOGY INVESTMENT AGREEMENTS Pt. 603, App. A Appendix A to Part 603—Applicable Federal.... Prohibitions on discrimination on the basis of race, color, or national origin in Title VI of the Civil Rights... origin. 2. If the RD&D involves human subjects or animals, it is subject to the requirements codified by...

  1. 78 FR 47817 - Parts and Accessories Necessary for Safe Operation; Application for an Exemption From Van Hool N...

    Science.gov (United States)

    2013-08-06

    ... DEPARTMENT OF TRANSPORTATION Federal Motor Carrier Safety Administration [Docket No. FMCSA-2013-0314] Parts and Accessories Necessary for Safe Operation; Application for an Exemption From Van Hool N... exemption from Van Hool N.V. and Coach USA (Van Hool/Coach USA) to allow the use of double deck motorcoaches...

  2. UV-Vis spectroscopy of tyrosine side-groups in studies of protein structure. Part 2: selected applications.

    Science.gov (United States)

    Antosiewicz, Jan M; Shugar, David

    2016-06-01

    In Part 2 we discuss application of several different types of UV-Vis spectroscopy, such as normal, difference, and second-derivative UV absorption spectroscopy, fluorescence spectroscopy, linear and circular dichroism spectroscopy, and Raman spectroscopy, of the side-chain of tyrosine residues in different molecular environments. We review the ways these spectroscopies can be used to probe complex protein structures.

  3. 40 CFR Appendix A to Part 503 - Procedure To Determine the Annual Whole Sludge Application Rate for a Sewage Sludge

    Science.gov (United States)

    2010-07-01

    ... Whole Sludge Application Rate for a Sewage Sludge A Appendix A to Part 503 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SEWAGE SLUDGE STANDARDS FOR THE USE OR DISPOSAL OF SEWAGE SLUDGE Pt... a Sewage Sludge Section 503.13(a)(4)(ii) requires that the product of the concentration for each...

  4. Application of artificial intelligence (AI) concepts to the development of space flight parts approval model

    Science.gov (United States)

    Krishnan, G. S.

    1997-01-01

    A cost effective model which uses the artificial intelligence techniques in the selection and approval of parts is presented. The knowledge which is acquired from the specialists for different part types are represented in a knowledge base in the form of rules and objects. The parts information is stored separately in a data base and is isolated from the knowledge base. Validation, verification and performance issues are highlighted.

  5. Area efficient decimation filter based on merged delay transformation for wireless applications

    International Nuclear Information System (INIS)

    Rashid, U.; Siddiq, F.; Muhammad, T.; Jamal, H.

    2013-01-01

    Expected by 2014 is the 4G standard for cellular wireless communications, which will improve bandwidth, connectivity and roaming for mobile and stationary devices, 4G and other wireless systems are currently hot topics of research and development in the communication field. In wireless technologies like Global System for Mobile (GSM), Digital Enhanced Cordless Telecommunications (DECT) and Wi-Fi, decimation filters are essential part of transceivers being used. This paper describes a decimation filter which is efficient in terms of both the power consumption and the area used. The architecture is based upon Merged Delay Transformation (MDT). The existing Merged Delay Transformed Infinite Impulse Response (IIR) architecture is power efficient but requires larger area. The proposed and existing filters were implemented on Field-Programmable Gate Array (FPGA). The computational cost of the proposed filter is reduced to (3N/2 + 1) and M-1 times reduction in the number of multipliers in comparison to the existing FIR filter is achieved. The power consumption and speed remain nearly the same. (author)

  6. MM5 simulations for air quality modeling: An application to a coastal area with complex terrain

    Science.gov (United States)

    Lee, Sang-Mi; Princevac, Marko; Mitsutomi, Satoru; Cassmassi, Joe

    A series of modifications were implemented in MM5 simulation in order to account for wind along the Santa Clarita valley, a north-south running valley located in the north of Los Angeles. Due to high range mountains in the north and the east of the Los Angeles Air Basin, sea breeze entering Los Angeles exits into two directions. One branch moves toward the eastern part of the basin and the other to the north toward the Santa Clarita valley. However, the northward flow has not been examined thoroughly nor simulated successfully in the previous studies. In the present study, we proposed four modifications to trigger the flow separation. They were (1) increasing drag over the ocean, (2) increasing soil moisture content, (3) selective observational nudging, and (4) one-way nesting for the innermost domain. The Control run overpredicted near-surface wind speed over the ocean and sensible heat flux, in an urbanized area, which justifies the above 1st and 2nd modification. The Modified run provided an improvement in near-surface temperature, sensible heat flux and wind fields including southeasterly flow along the Santa Clarita valley. The improved MM5 wind field triggered a transport to the Santa Clarita valley generating a plume elongated from an urban center to the north, which did not exist in MM5 Control run. In all, the modified MM5 fields yielded better agreement in both CO and O3 simulations especially in the Santa Clarita area.

  7. Telerehabilitation: Review of the State-of-the-Art and Areas of Application.

    Science.gov (United States)

    Peretti, Alessandro; Amenta, Francesco; Tayebati, Seyed Khosrow; Nittari, Giulio; Mahdi, Syed Sarosh

    2017-07-21

    Telemedicine applications have been increasing due to the development of new computer science technologies and of more advanced telemedical devices. Various types of telerehabilitation treatments and their relative intensities and duration have been reported. The objective of this review is to provide a detailed overview of the rehabilitation techniques for remote sites (telerehabilitation) and their fields of application, with analysis of the benefits and the drawbacks related to use. We discuss future applications of telerehabilitation techniques with an emphasis on the development of high-tech devices, and on which new tools and applications can be used in the future. We retrieved relevant information and data on telerehabilitation from books, articles and online materials using the Medical Subject Headings (MeSH) "telerehabilitation," "telemedicine," and "rehabilitation," as well as "disabling pathologies." Telerehabilitation can be considered as a branch of telemedicine. Although this field is considerably new, its use has rapidly grown in developed countries. In general, telerehabilitation reduces the costs of both health care providers and patients compared with traditional inpatient or person-to-person rehabilitation. Furthermore, patients who live in remote places, where traditional rehabilitation services may not be easily accessible, can benefit from this technology. However, certain disadvantages of telerehabilitation, including skepticism on the part of patients due to remote interaction with their physicians or rehabilitators, should not be underestimated. This review evaluated different application fields of telerehabilitation, highlighting its benefits and drawbacks. This study may be a starting point for improving approaches and devices for telerehabilitation. In this context, patients' feedback may be important to adapt rehabilitation techniques and approaches to their needs, which would subsequently help to improve the quality of rehabilitation

  8. Multiple-land use practices in transfrontier conservation areas: the case of Greater Mapungubwe straddling parts of Botswana, South Africa and Zimbabwe

    Directory of Open Access Journals (Sweden)

    Sinthumule Ndidzulafhi Innocent

    2016-12-01

    Full Text Available Transfrontier Conservation Areas (TFCAs have recently emerged as the 21st century approach to managing protected areas in southern Africa. Unlike national parks and other protected areas that place emphasis only on the protection of plant and animal species within their borders, transfrontier conservation areas promote conservation beyond the borders of protected areas. Consequently, this mega-conservation initiative encourage multiple land-use practices with the purpose of improving rural livelihoods whilst promoting biodiversity conservation. Thus, land parcels under different forms of tenure are brought together into a common nature conservation project. This study argues that the integration of various land-use practices within one area benefits conservation goals at the expense of local communities and irrigation farmers. To substantiate this argument, the study draws on fieldwork material collected in the Greater Mapungubwe Transfrontier Conservation Area spanning parts of Botswana, South Africa and Zimbabwe. The study concludes that multiple-land use practices in transfrontier conservation areas is only promoted by wildlife managers to gain access to extra land.

  9. Application of Structure Monitoring Systems to the Assessment of the Behaviour of Bridges in Mining Areas

    Science.gov (United States)

    Parkasiewicz, Beata; Kadela, Marta; Bętkowski, Piotr; Sieńko, Rafał; Bednarski, Łukasz

    2017-10-01

    Structure monitoring systems are increasingly used to assess the technical condition and improve the safety of structures. Monitoring the structural behaviour becomes necessary in the case of structures located in areas with complicated ground conditions. Due to the risk of failures and the resulting economic and non-material costs, monitoring should be in particular applied to linear structures, including railways, tramlines, motorways and expressways, as well as related facilities (e.g. bridges). Monitoring shall consist in regular observations, measurements and documenting all significant data during construction, after its completion and during usage, and in analysing and evaluating the results. This paper presents the application of structure monitoring systems to the assessment of the behaviour of bridges exposed to the impact of mining operations.

  10. Analysis of Applicability of Flow Averaging Pitot Tubes in the Areas of Flow Disturbance

    Directory of Open Access Journals (Sweden)

    Pochwała Sławomir

    2016-03-01

    Full Text Available The issues connected with the complex design of various facilities, including up-to-date boiler equipment as well as the ways of organizing the space around them, are the reasons why there is often a lack of room for mounting a flowmeter in accordance with the recommendations of manufacturers. In most cases the problem is associated with ensuring sufficient lengths of straight pipe leading into and out of a flowmeter. When this condition cannot be fulfilled, the uncertainty of measurement increases above the value guaranteed by the manufacturer of the flowmeter. This sort of operation problem has encouraged the authors of this paper to undertake research aimed at the analysis of applicability of averaging Pitot tubes in the areas of flow disturbance.

  11. Analysis and Application of River Surface Line in Hilly Area based on Hec-ras Model

    Directory of Open Access Journals (Sweden)

    Yang Congshan

    2017-01-01

    Full Text Available For example—Cixian Fuyang River Regulation Project. Due to the character that Fuyang River is located in hilly areas of Cixian, we use the Hex-ras software to calculate the status of the river water surface line for the goal of determining the final treatment plan. We maintain the present situation of the river channel design as principle, select the most appropriate pushed water level and roughnessas the basic, and we combine the classification calculation of crossing structures of backwater and the encryption calculation section to get the more accurate result. We compare the water level elevation and the calculation of cross strait, analyze the design parameters, calculate repeated the water line section, analyze the rationality of the design plan, and then finally determine the applicability of Hex-rac software in the large continuous variation of cross section of embankment of river river surface line.

  12. Testing and evaluation of large-area heliostats for solar thermal applications

    Energy Technology Data Exchange (ETDEWEB)

    Strachan, J.W.; Houser, R.M.

    1993-02-01

    Two heliostats representing the state-of-the-art in glass-metal designs for central receiver (and photovoltaic tracking) applications were tested and evaluated at the National Solar Thermal Test Facility in Albuquerque, New Mexico from 1986 to 1992. These heliostats have collection areas of 148 and 200 m{sup 2} and represent low-cost designs for heliostats that employ glass-metal mirrors. The evaluation encompassed the performance and operational characteristics of the heliostats, and examined heliostat beam quality, the effect of elevated winds on beam quality, heliostat drives and controls, mirror module reflectance and durability, and the overall operational and maintenance characteristics of the two heliostats. A comprehensive presentation of the results of these and other tests is presented. The results are prefaced by a review of the development (in the United States) of heliostat technology.

  13. Application of smart phone and supporting set for fundus imaging in primary hospital of rural area

    Directory of Open Access Journals (Sweden)

    Yong-Feng Jing

    2018-01-01

    Full Text Available AIM: To describe the application of smart phone and supporting set for acquiring fundus images with slitlamp examination and non-contact lens in primary hospital of the rural area. METHODS: The supporting set for smart phone was purchased from taobao and securely connected to the ocular lens of slitlamp microscopy. The fundus photos were imaged with assistance of non-contact slitlamp lens from Volk. RESULTS: High quality images of various retinal diseases could be successfully taken with smart phone and supporting set by slitlamp examination. The fundus images were send to patients with Wechat as medical records or used for telconsultant. CONCLUSION: High resolution smart phones are wildly used nowadays and supporting sets are very accessible; thus high quality of images could be obtained with minimal cost in rural hospitals. The digital fundus images will be beneficial for medical record and rapid diagnosis with telconsultant.

  14. The Application Modular Floating Pontoon to Support Floods Disaster Evacuation System in Heavy Populated Residential Area

    Directory of Open Access Journals (Sweden)

    Ahmad Fauzan Zakki

    2014-10-01

    Full Text Available During floods disaster in the heavy populated residential area, the lack of existing life saving appliances system such as rubber boat and wooden boat were not able to evacuate the disaster victims spontaneously in mass. The condition might be explained since the rubber boat and wooden boat have limited occupant capacity. Based on the conditions, the main objectives of the research are focused on the evaluation of the application of modular floating pontoon as multipurpose floating equipment to support floods disaster evacuation process. The investigation of the modular floating pontoon performance such as hydrostatics characteristics, the equilibrium condition and the intact stability was studied using strip theory and Krylov’s method. Furthermore, the strength analysis of the modular floating pontoon structure was calculated using finite element method. The results show that the modular floating pontoon is reliable to support the evacuation process.

  15. Wave Separation. Part Two: Applications La séparation des ondes. Deuxième partie : applications

    Directory of Open Access Journals (Sweden)

    Glangeaud F.

    2006-11-01

    Full Text Available Identifying waves in seismic sections sometimes requires the waves to be separated. The geophysicist has a variety of complementary filters at his disposal that can be used to perform optimum separations if they are carefully chosen and combined. The first part of this article was devoted to the principle and methods of wave separation. Wave separation methods can be divided up into three categories : acceptance region methods, inversion methods and matrix methods. The tau-p method and f-k filtering belong to the first category while the parametric method belongs to the second one. Matrix filtering by means of the cross-spectral matrix (SMF : Spectral Matrix Filtering, the singular value decomposition (SVD and the Karhunen-Loeve method (KLT-Karhunen-Loeve Transform belong to the third group. Matrix methods are used both to separate waves and to break data down into a signal space and a noise space. Here in the second part, we use synthetic data to compare how well the SVD and SMF methods perform in separating waves with only one eigenvector. We show that SMF filtering can be made much more effective by introducing models and present the SMF method with adapted or constrained models. We also introduce a field example of wave separation by conventional SMF filtering, then a synthetic example and two field examples of wave separation by SMF filtering with models. We demonstrate the advantages of using different wave separation methods together (f-k, KLT and SMF to achieve optimum separation. The data that serve to illustrate this are full waveform acoustic data acquired in a horizontal drain hole. A VSP-type well survey is used to compare the different methods : f-k, SVD, SMF and the parametric method. The last example shows how SMF processing can be used for anisotropy measurement. The f-k filter requires a large number of traces that have been distance sampled at short intervals. The more stable the wave that is being extracted and the more

  16. Safety assessment in plant layout design using indexing approach: implementing inherent safety perspective. Part 1 - guideword applicability and method description.

    Science.gov (United States)

    Tugnoli, Alessandro; Khan, Faisal; Amyotte, Paul; Cozzani, Valerio

    2008-12-15

    Layout planning plays a key role in the inherent safety performance of process plants since this design feature controls the possibility of accidental chain-events and the magnitude of possible consequences. A lack of suitable methods to promote the effective implementation of inherent safety in layout design calls for the development of new techniques and methods. In the present paper, a safety assessment approach suitable for layout design in the critical early phase is proposed. The concept of inherent safety is implemented within this safety assessment; the approach is based on an integrated assessment of inherent safety guideword applicability within the constraints typically present in layout design. Application of these guidewords is evaluated along with unit hazards and control devices to quantitatively map the safety performance of different layout options. Moreover, the economic aspects related to safety and inherent safety are evaluated by the method. Specific sub-indices are developed within the integrated safety assessment system to analyze and quantify the hazard related to domino effects. The proposed approach is quick in application, auditable and shares a common framework applicable in other phases of the design lifecycle (e.g. process design). The present work is divided in two parts: Part 1 (current paper) presents the application of inherent safety guidelines in layout design and the index method for safety assessment; Part 2 (accompanying paper) describes the domino hazard sub-index and demonstrates the proposed approach with a case study, thus evidencing the introduction of inherent safety features in layout design.

  17. Internet-based wide area measurement applications in deregulated power systems

    Science.gov (United States)

    Khatib, Abdel-Rahman Amin

    Since the deregulation of power systems was started in 1989 in the UK, many countries have been motivated to undergo deregulation. The United State started deregulation in the energy sector in California back in 1996. Since that time many other states have also started the deregulation procedures in different utilities. Most of the deregulation market in the United States now is in the wholesale market area, however, the retail market is still undergoing changes. Deregulation has many impacts on power system network operation and control. The number of power transactions among the utilities has increased and many Independent Power Producers (IPPs) now have a rich market for competition especially in the green power market. The Federal Energy Regulatory Commission (FERC) called upon utilities to develop the Regional Transmission Organization (RTO). The RTO is a step toward the national transmission grid. RTO is an independent entity that will operate the transmission system in a large region. The main goal of forming RTOs is to increase the operation efficiency of the power network under the impact of the deregulated market. The objective of this work is to study Internet based Wide Area Information Sharing (WAIS) applications in the deregulated power system. The study is the first step toward building a national transmission grid picture using information sharing among utilities. Two main topics are covered as applications for the WAIS in the deregulated power system, state estimation and Total Transfer Capability (TTC) calculations. As a first step for building this national transmission grid picture, WAIS and the level of information sharing of the state estimation calculations have been discussed. WAIS impacts to the TTC calculations are also covered. A new technique to update the TTC using on line measurements based on WAIS created by sharing state estimation is presented.

  18. RCRA Part A and Part B Permit Application for Waste Management Activities at the Nevada Test Site: Proposed Mixed Waste Disposal Unit (MWSU)

    Energy Technology Data Exchange (ETDEWEB)

    NSTec Environmental Management

    2010-07-19

    The proposed Mixed Waste Storage Unit (MWSU) will be located within the Area 5 Radioactive Waste Management Complex (RWMC). Existing facilities at the RWMC will be used to store low-level mixed waste (LLMW). Storage is required to accommodate offsite-generated LLMW shipped to the Nevada Test Site (NTS) for disposal in the new Mixed Waste Disposal Unit (MWDU) currently in the design/build stage. LLMW generated at the NTS (onsite) is currently stored on the Transuranic (TRU) Pad (TP) in Area 5 under a Mutual Consent Agreement (MCA) with the Nevada Division of Environmental Protection, Bureau of Federal Facilities (NDEP/BFF). When the proposed MWSU is permitted, the U.S. Department of Energy (DOE) will ask that NDEP revoke the MCA and onsite-generated LLMW will fall under the MWSU permit terms and conditions. The unit will also store polychlorinated biphenyl (PCB) waste and friable and non-friable asbestos waste that meets the acceptance criteria in the Waste Analysis Plan (Exhibit 2) for disposal in the MWDU. In addition to Resource Conservation and Recovery Act (RCRA) requirements, the proposed MWSU will also be subject to Department of Energy (DOE) orders and other applicable state and federal regulations. Table 1 provides the metric conversion factors used in this application. Table 2 provides a list of existing permits. Table 3 lists operational RCRA units at the NTS and their respective regulatory status.

  19. RCRA Part A and Part B Permit Application for Waste Management Activities at the Nevada Test Site: Proposed Mixed Waste Disposal Unit (MWSU)

    International Nuclear Information System (INIS)

    2010-01-01

    The proposed Mixed Waste Storage Unit (MWSU) will be located within the Area 5 Radioactive Waste Management Complex (RWMC). Existing facilities at the RWMC will be used to store low-level mixed waste (LLMW). Storage is required to accommodate offsite-generated LLMW shipped to the Nevada Test Site (NTS) for disposal in the new Mixed Waste Disposal Unit (MWDU) currently in the design/build stage. LLMW generated at the NTS (onsite) is currently stored on the Transuranic (TRU) Pad (TP) in Area 5 under a Mutual Consent Agreement (MCA) with the Nevada Division of Environmental Protection, Bureau of Federal Facilities (NDEP/BFF). When the proposed MWSU is permitted, the U.S. Department of Energy (DOE) will ask that NDEP revoke the MCA and onsite-generated LLMW will fall under the MWSU permit terms and conditions. The unit will also store polychlorinated biphenyl (PCB) waste and friable and non-friable asbestos waste that meets the acceptance criteria in the Waste Analysis Plan (Exhibit 2) for disposal in the MWDU. In addition to Resource Conservation and Recovery Act (RCRA) requirements, the proposed MWSU will also be subject to Department of Energy (DOE) orders and other applicable state and federal regulations. Table 1 provides the metric conversion factors used in this application. Table 2 provides a list of existing permits. Table 3 lists operational RCRA units at the NTS and their respective regulatory status.

  20. 40 CFR Table 1 to Subpart B of... - Section 112(j) Part 2 Application Due Dates

    Science.gov (United States)

    2010-07-01

    ... Chemical Manufacturing (MON).1 Organic Liquids Distribution.Primary Magnesium Refining. Metal Can (Surface Coating). Plastic Parts and Products (Surface Coating). Chlorine Production. Miscellaneous Metal Parts and..., Institutional/Commercial Boilers, and Process Heaters.5 Hydrochloric Acid Production.6 1 Covers 23 source...

  1. 10 CFR 603.125 - Applicability of other parts of the DOE Assistance Regulations.

    Science.gov (United States)

    2010-01-01

    ... Regulations. 603.125 Section 603.125 Energy DEPARTMENT OF ENERGY (CONTINUED) ASSISTANCE REGULATIONS TECHNOLOGY...: (1) 10 CFR part 601—lobbying restrictions apply by law (31 U.S.C. 1352) to a TIA that is a... nonprocurement instruments in general; and (3) 10 CFR part 607—drug-free work-place (financial assistance...

  2. Parts-based geophysical inversion with application to water flooding interface detection and geological facies detection

    Science.gov (United States)

    Zhang, Junwei

    I built parts-based and manifold based mathematical learning model for the geophysical inverse problem and I applied this approach to two problems. One is related to the detection of the oil-water encroachment front during the water flooding of an oil reservoir. In this application, I propose a new 4D inversion approach based on the Gauss-Newton approach to invert time-lapse cross-well resistance data. The goal of this study is to image the position of the oil-water encroachment front in a heterogeneous clayey sand reservoir. This approach is based on explicitly connecting the change of resistivity to the petrophysical properties controlling the position of the front (porosity and permeability) and to the saturation of the water phase through a petrophysical resistivity model accounting for bulk and surface conductivity contributions and saturation. The distributions of the permeability and porosity are also inverted using the time-lapse resistivity data in order to better reconstruct the position of the oil water encroachment front. In our synthetic test case, we get a better position of the front with the by-products of porosity and permeability inferences near the flow trajectory and close to the wells. The numerical simulations show that the position of the front is recovered well but the distribution of the recovered porosity and permeability is only fair. A comparison with a commercial code based on a classical Gauss-Newton approach with no information provided by the two-phase flow model fails to recover the position of the front. The new approach could be also used for the time-lapse monitoring of various processes in both geothermal fields and oil and gas reservoirs using a combination of geophysical methods. A paper has been published in Geophysical Journal International on this topic and I am the first author of this paper. The second application is related to the detection of geological facies boundaries and their deforation to satisfy to geophysica

  3. Competitive policies in the Nordic energy research and innovation area - eNERGIA : Part 3: Special reports

    Energy Technology Data Exchange (ETDEWEB)

    Klitkou, Antje; Pedersen, Trond Einar; Scordato, Lisa; Mariussen, Aage

    2008-07-01

    This report (Part 3: Special reports) is the third in a series of four reporting the results of the eNERGIA project. The first report presents the eight countries examined in the project - Denmark, Finland, Iceland, Norway, Sweden, Estonia, Latvia and Lithuania. The second report deals mainly with selected renewable energy technologies, which are discussed from different perspectives. The fourth report provides a summary of the whole project. The present report summarises the SWOT analyses of the Nordic countries and the eNERGIA workshops, and presents case studies of good practice. (Author) refs., 1 fig., 10 tabs

  4. Strategic areas for non-electric application of nuclear energy in Indonesia

    International Nuclear Information System (INIS)

    Sasmojo, S.; Subki, I.R.; Lasman, A.N.

    1997-01-01

    An attempt is made to identify strategic areas, whereby non-electric application of nuclear energy may be justified. Subject to further evaluation, particularly on the economic aspects, non-electric application of nuclear energy in Indonesia may have justifiable strategic role in the long term sustainability of the development of the country. The key arguments are: (a) within not too far distant future, domestic resources constraints of oil and natural gas will strongly be felt, especially if the current trend in the rate of production of the two commodities has to be maintained to satisfy the growing demand for energy and to secure foreign exchange earning; (b) nuclear option, in concurrent with coal and biomass options, can provide the need for heat supply required to undertake strategic schemes for (i) improving oil production capacity; (ii) prolong the availability of oil and natural gas by displacing their uses as heat sources in industry, whenever appropriate; (iii) coal conversion to synthetic natural gas (SNG), or synthesis gas, to substitute or at least supplement the use of natural gas as industrial chemical feedstock; and (iv) sea water desalination by evaporation, to overcome shortage of fresh drinking and industrial water supply, as well as to secure its reliability and availability. In terms of carbon emission to the atmosphere, the nuclear option offers an interesting choice. In view of those, serious consideration for further technical assessment, and thorough evaluation on the economic viability and social acceptability for the option is recommended. (author). 7 refs, 5 figs, 2 tabs

  5. Environmental assessment of applicability of mineral-organic composite for landfill area rehabilitation

    Science.gov (United States)

    Mizerna, Kamila; Król, Anna; Mróz, Adrian

    2017-10-01

    This paper undertakes an assessment of the impact of a mineral-organic composite on the environment as well as the potential for its application for land rehabilitation purposes. The analysis involves the release of the leachable contaminations from the material subjected to testing. This material was formed by a composite manufactured on the basis of communal bottom ash and stabilized sewage sludge. The sludge resulting from wastewater treatment was subjected to stabilization and dehydration in waste pounds at the phase of pre-watering until 20% of dry mass is obtained. Subsequently, they were mixed with bottom ash, which was obtained from selective waste collection, in a 1:1 mass ratio. The analysis involved the leaching of inorganic contaminants in the form of heavy metals, sulphates (VI), chlorides, and fluorides as well as organic compounds in the form of organic carbon solution under the effect of leachant with a various level of pH. The analysed components were characterized by various leaching behaviour depending on the leachant pH. On the basis of the results, it was able to assess the potential hazard posed by the examined material on the environment as a consequence of its application for landfill area rehabilitation.

  6. Environmental assessment of applicability of mineral-organic composite for landfill area rehabilitation

    Directory of Open Access Journals (Sweden)

    Mizerna Kamila

    2017-01-01

    Full Text Available This paper undertakes an assessment of the impact of a mineral-organic composite on the environment as well as the potential for its application for land rehabilitation purposes. The analysis involves the release of the leachable contaminations from the material subjected to testing. This material was formed by a composite manufactured on the basis of communal bottom ash and stabilized sewage sludge. The sludge resulting from wastewater treatment was subjected to stabilization and dehydration in waste pounds at the phase of pre-watering until 20% of dry mass is obtained. Subsequently, they were mixed with bottom ash, which was obtained from selective waste collection, in a 1:1 mass ratio. The analysis involved the leaching of inorganic contaminants in the form of heavy metals, sulphates (VI, chlorides, and fluorides as well as organic compounds in the form of organic carbon solution under the effect of leachant with a various level of pH. The analysed components were characterized by various leaching behaviour depending on the leachant pH. On the basis of the results, it was able to assess the potential hazard posed by the examined material on the environment as a consequence of its application for landfill area rehabilitation.

  7. Commercial Off-The-Shelf (COTS) Parts Risk and Reliability User and Application Guide

    Science.gov (United States)

    White, Mark

    2017-01-01

    All COTS parts are not created equal. Because they are not created equal, the notion that one can force the commercial industry to follow a set of military specifications and standards, along with the certifications, audits and qualification commitments that go with them, is unrealistic for the sale of a few parts. The part technologies that are Defense Logistics Agency (DLA) certified or Military Specification (MS) qualified, are several generations behind the state-of-the-art high-performance parts that are required for the compact, higher performing systems for the next generation of spacecraft and instruments. The majority of the part suppliers are focused on the portion of the market that is producing high-tech commercial products and systems. To that end, in order to compete in the high performance and leading edge advanced technological systems, an alternative approach to risk assessment and reliability prediction must be considered.

  8. T@lemed: Ehealth applications applied to underserved areas in Latin America

    Science.gov (United States)

    Sachpazidis, Ilias; Ohl, Roland; Binotto, Alécio Pedro Delazari; Torres, Márcio Soares; Messina, Luiz Ary; Sales, Alexandre; Gomes, Ricardo; Sakas, Georgios

    2006-12-01

    Access to medical care is sometimes very difficult to be reached from people living in rural and underserved areas. This problem is very well known in rural areas in Brazil. Citizens have no access to health care. They have to travel hundreds of kilometres to receive medical care. In this paper, we will propose a medical network based on state-of-the-art medical imaging application that addresses the problems of providing health care from a distance. Additionally, we are going to show preliminarily results of the first year of the system deployment and utilization in undeserved regions in Brazil. The total number of patients submitted to ultrasound examinations, during the 10 months of projects' medical trials, is 321. The exams have begun with the elderly people (hypertension and diabetes cases) with 90% above 50-years-old. Fifty-four percent were male and 46% were female. From those exams, 67 exams (21%) needed a second medical opinion and were transmitted to Santa Casa hospital in Porto Alegre, Brazil, one of the referral medical centres. From those second opinions of Santa Casa, 12 exams had to be repeated since the acquired images were not sufficient to give a correct diagnosis. The Lagoa Tres Cantos medical doctor performed also preventive exams with patients who had not presented any symptoms (70%).

  9. Applications of quantum mechanical techniques to areas outside of quantum mechanics

    CERN Document Server

    Khrennikov, Andrei

    2018-01-01

    This book deals with applications of quantum mechanical techniques to areas outside of quantum mechanics, so-called quantum-like modeling. Research in this area has grown over the last 15 years. But even already more than 50 years ago, the interaction between Physics Nobelist Pauli and the psychologist Carl Jung in the 1950's on seeking to find analogous uses of the complementarity principle from quantum mechanics in psychology needs noting. This book does NOT want to advance that society is quantum mechanical! The macroscopic world is manifestly not quantum mechanical. But this rules not out that one can use concepts and the mathematical apparatus from quantum physics in a macroscopic environment. A mainstay ingredient of quantum mechanics, is 'quantum probability' and this tool has been proven to be useful in the mathematical modelling of decision making. In the most basic experiment of quantum physics, the double slit experiment, it is known (from the works of A. Khrennikov) that the law of total probabi...

  10. Not single brain areas but a network is involved in language: Applications in presurgical planning.

    Science.gov (United States)

    Alemi, Razieh; Batouli, Seyed Amir Hossein; Behzad, Ebrahim; Ebrahimpoor, Mitra; Oghabian, Mohammad Ali

    2018-02-01

    Language is an important human function, and is a determinant of the quality of life. In conditions such as brain lesions, disruption of the language function may occur, and lesion resection is a solution for that. Presurgical planning to determine the language-related brain areas would enhance the chances of language preservation after the operation; however, availability of a normative language template is essential. In this study, using data from 60 young individuals who were meticulously checked for mental and physical health, and using fMRI and robust imaging and data analysis methods, functional brain maps for the language production, perception and semantic were produced. The obtained templates showed that the language function should be considered as the product of the collaboration of a network of brain regions, instead of considering only few brain areas to be involved in that. This study has important clinical applications, and extends our knowledge on the neuroanatomy of the language function. Copyright © 2018 Elsevier B.V. All rights reserved.

  11. Applications of the monitor of loose parts in the cycle 6 of the Laguna Verde Unit 2 power plant

    International Nuclear Information System (INIS)

    Calleros, G.; Mendez, A.; Gomez, R.A.; Castillo, R.; Bravo, J.M.

    2004-01-01

    The monitor of loose parts (Loose Parts Monitoring System) installed in the Unit 2 of the Laguna Verde Central is a tool to detect strange objects or parts loose in the system of refrigeration of the reactor that could be impacted in the walls of the recirculation knots or in the internal of the reactor. In this work two applications are shown carried out with the Monitor of Loose Parts, determining the characteristics of the stable nominal conditions, those which when changing, they are used to diagnose during the Cycle 6 of the Unit 2, failures in the components of the the recirculation circuits or to identify mechanical vibrations of the recirculation knots induced by a flow of recirculation bistable associated to operative conditions of the reactor. (Author)

  12. Application of gis on determination of flood prone areas and critical arterial road network by using chaid method in bandung area

    Directory of Open Access Journals (Sweden)

    Darwin

    2018-01-01

    Full Text Available Floods in Bandung area often occur when the rainfall is high then the water volume exceed the capacity of Citarum watershed. Floods cause economic and social losses. The purpose of this research is to get the GIS application model in the estimation of puddle area and road network in Bandung Metropolitan Area has disturbed.Geospatial map preparation methodology used statistical data from 11041 flood points, which divided into two groups, 7729 flood points to estimate the decision tree model and 3312 flood points to validate the model. The process of making flood vulnerability maps is approached by Chi-square Automatic Interaction Detection (CHAID method, and validation using Receiver Operating Characteristic (ROC method. Validation results in the area under the curve with a value of 93.1% for success rate and 92.7% for the prediction level.Chaid result is class 0 - 0,047 covering 76,68% area; Grades of 0.047-0.307 include 5.37%; Grades 0.307 - 0.599 (Low covering 5.36%; Grades 0.599 to 0.4444 include 5.31% and grade 0.844-1 (high covering 7.27% of the research area. Flood-prone road network is Link from Rancaekek (Area of PT Kahatex, link from Solokan Jeruk (Cicalengka-Majalaya, Link Baleendah, and linkDayeuhkolot (M.Toha - Andir

  13. COL Application Content Guide for HTGRs: Revision to RG 1.206, Part 1 - Status Report

    Energy Technology Data Exchange (ETDEWEB)

    Wayne Moe

    2012-08-01

    A combined license (COL) application is required by the Nuclear Regulatory Commission (NRC) for all proposed nuclear plants. The information requirements for a COL application are set forth in 10 CFR 52.79, “Contents of Applications; Technical Information in Final Safety Analysis Report.” An applicant for a modular high temperature gas-cooled reactor (HTGR) must develop and submit for NRC review and approval a COL application which conforms to these requirements. The technical information necessary to allow NRC staff to evaluate a COL application and resolve all safety issues related to a proposed nuclear plant is detailed and comprehensive. To this, Regulatory Guide (RG) 1.206, “Combined License Applications for Nuclear Power Plants” (LWR Edition), was developed to assist light water reactor (LWR) applicants in incorporating and effectively formatting required information for COL application review (Ref. 1). However, the guidance prescribed in RG 1.206 presumes a LWR design proposal consistent with the systems and functions associated with large LWR power plants currently operating under NRC license.

  14. Hydrochemical characterization and quality evaluation of groundwater in parts of the basement complex area of ekiti, southwestern nigeria

    International Nuclear Information System (INIS)

    Ojo, T.A.; Niyi, T.M.

    2013-01-01

    Well water (88 samples) were collected across various bedrock units in the basement terrain of Ekiti area, Southwestern Nigeria. They were subjected to in-situ physico-chemical measurement and hydrochemical analyses using lC-OES and ion-chromatography methods for cations and anions, respectively. To understand the water quality and utilisation aspects of groundwater, chemical indices like sodium %, sodium adsorption ratio (SAR), Wilcox diagram and salinity diagram were constructed based on the analytical results. The results show pH values ranging between 6.0-7.8 and total hardness (TH) 3.2-508.7 mg/L. Major cations concentrations were in the order of Ca2 >K/sup +/>Na >Mg with average values of 28.5, 26.8, 24.2 and 7.9 mg/L, respectively while that of the anions were HCO >Cl >SO/sub 4/sup 2/ >NO/sub 3/ with average values of 118.7, 54.2, 23.8 and 0.92 mg/L. The main hydrochemical facies being Ca-HCO/sub 3/ waters. The ionic orders of abundance varied in different rocks of the study area. These concentration trends show a low total dissolved solids (130-1544 microS/cm) indicating a low water-rock interaction due to low residence time which is an indication of CO/sub 2/ dominated infiltration recharge with limited migratory history typical of the shallow basement terrain in the study area. Quality assessment revealed a potable groundwater system with chemical parameters within the acceptable limits of the WHO and SON drinking water standards with exception of Fe, Mn and Pb in a couple of locations. Also, the estimated SAR alongside TDS revealed a shallow groundwater system suitable for irrigation purpose. (author)

  15. The finite element part of the LAMCAL program. Elastic-plastic fracture mechanics applications

    International Nuclear Information System (INIS)

    Lamain, L.G.; Blanckenburg, J.F.G.

    1982-01-01

    The elastic-plastic FEM code described in this report is the third part of the Lamcal program of which the two other parts for mesh generating and plotting were presented previously. Also this part uses the dynamic core storage. All variables and problem defining data are stored in one common array-SPACE. If all three parts are used together, the same common-SPACE is reused in each part. The lay-out of the complete program is given. J-integral evaluation and plotting can be done immediately in the FE run or afterwards in a post processing run. Post processing is done within the FEM part with a reduced core space. Originally developed as a general code, the use of the present version is mainly focussed on research in the field of the fracture mechanics. Several J-integral routines are available as well as crack growth modelling by node release or stiffness reduction, energy calculations, crack tip elements, etc. In this report the theory is discussed and some sample problems are given. The theory is presented in two parts, the general FEM and the more specific EPFM theory. For the sample problems, a choice has been made to show the accuracy of the program under more or less severe loading conditions

  16. ENVIRONMENTAL SAFETY OF LIVESTOCK PRODUCTS IN THE ECONOMIC AND GEOGRAPHIC AREAS OF THE AZERBAIJAN PART OF THE GREATER CAUCASUS

    Directory of Open Access Journals (Sweden)

    F. M. Jafarova

    2016-01-01

    Full Text Available Aim. The aim is to study the political, economic and environmental aspects of food security, which is an important component of national security; to study the issues of the use of environmentally friendly agricultural products, as well as the environmental safety of livestock products.Methods. Determination of the dynamics of livestock production on the basis of the comparative statistical analysis, the study of animal breeding territorial organization through a systematic approach.Results. The region has favorable conditions for the production of ecologically clean agricultural products, using environmentally friendly feed. We should develop manufacturing industries to meet international standards and provide the population with healthy food.Conclusion. We revealed the ecological safety of livestock products in the economic and geographic regions of the Azerbaijan part of the Greater Caucasus.

  17. Remediating Contaminated Sediments in the Ashtabula Harbor as Part of the Ashtabula River Area of Concern: A Collaboration Success Story

    International Nuclear Information System (INIS)

    Diggs, I.W.; Case, J.L.; Rule, R.W.; Snyder, M.

    2009-01-01

    The U.S. Army Corps of Engineers, Buffalo District (USACE), in close collaboration with the USEPA and members of an Ashtabula, Ohio, stakeholder advocacy group, were able to achieve major success in mitigating ecological impacts from contaminated sediments deposited in the lower Ashtabula River and Ashtabula Harbor after years of effort to obtain the federal funding needed to do so. The river and harbor were subject to unregulated discharges of hazardous chemicals, heavy metals, and low-level radiological contaminants from decades of operations by a variety of industrial, manufacturing, processing and production activities located near or adjacent to the river and harbor areas. Conditions in the ecosystem in and around the lower portion of the river deteriorated to the point that it was designated a Great Lakes Area of Concern (AOC) in 1983. The advocacy group known as the Ashtabula River Partnership (ARP), facilitated through efforts by both USACE and USEPA, developed an innovative plan to remediate the Ashtabula River AOC by conducting a two-phase project, completed with combined funding authorized under the Great Lakes Legacy Act (GLLA) of 2002, and Section 312(a) of the Water Resources Development Act (WRDA) of 1990. Removal of nearly 527,000 m 3 of contaminated sediments from the AOC would significantly reduce the contaminant source term and produce favorable conditions for re-establishing ecosystem balance. This would also be the first project in the nation completed by USACE under its authority to perform environmental dredging covered by WRDA Section 312(a). (authors)

  18. A study on PCB, PCDD/PCDF industrial contamination in an urban/agricultural area. Part I - Soil

    Energy Technology Data Exchange (ETDEWEB)

    Turrio-Baldassarri, L.; Alivernini, S.; Battistelli, C.L. [Istituto Superiore di Sanita, Rome (IT)] (and others)

    2004-09-15

    The Istituto Superiore di Sanita is involved in a study on the impact of existing and past industrial activities as possible sources of contamination on the surrounding environment. The study will focus on an industrial plant inside Brescia, a city in the north-west of Italy, where, from 1938 to 1984, 150 tons of polychlorinated biphenyls (PCBs) were produced. In 1994, 1996 and 1998 three monitoring programs, preliminary to the construction of a municipal waste incinerator near the industrial plant, were carried out. High PCBs levels in soils were observed, namely 3000-6000 fold higher than the limits (0,001mg/Kg) allowed by the 1999 Italian law, in an agricultural area where several small farms are located; the farmers have been consuming for a long time food, such as milk and meat, produced in their own farms. This study has different aims: confirming and enriching previous data; helping determining the contamination source; measuring the contamination of the animals living in the area or fed with contaminated forage; evaluate the exposure of the farmers as compared to general population. Moreover, this study is interested in studying the PCB and PCDD/PCDF transfer from soils to humans across the food chain.

  19. 40 CFR Table 2 to Subpart Dd of... - Applicability of Paragraphs in Subpart A of This Part 63-General Provisions to Subpart DD

    Science.gov (United States)

    2010-07-01

    ... A of This Part 63-General Provisions to Subpart DD 2 Table 2 to Subpart DD of Part 63 Protection of... Hazardous Air Pollutants from Off-Site Waste and Recovery Operations Pt. 63, Subpt. DD, Table 2 Table 2 to Subpart DD of Part 63—Applicability of Paragraphs in Subpart A of This Part 63—General Provisions to...

  20. 40 CFR Appendix A to Subpart Aa of... - Applicability of General Provisions (40 CFR Part 63, Subpart A) to Subpart AA

    Science.gov (United States)

    2010-07-01

    ... (40 CFR Part 63, Subpart A) to Subpart AA A Appendix A to Subpart AA of Part 63 Protection of... Hazardous Air Pollutants From Phosphoric Acid Manufacturing Plants Pt. 63, Subpt. AA, App. A Appendix A to Subpart AA of Part 63—Applicability of General Provisions (40 CFR Part 63, Subpart A) to Subpart AA 40 CFR...

  1. Proposed spatial framework to develop land use in an environmentally-sensitive area: Case study, El-Daba'a region, Egypt Part I: Ecological value assessment using GIS

    International Nuclear Information System (INIS)

    Al-Jenaid, S.S.; Mohammed, W.

    2008-01-01

    The aim of this study is to assess the ecological characteristics of El-Daba'a area in Egypt using GIS as a first step for the development of an environmental management plan for the area. The absence of environmental planning in the process of land use development may cause many significant negative impacts on biodiversity, ecological value and the general environmental conditions and the therefore reducing such negative impacts will improve land use development. The first part of sequel of two papers, which is a part of a sustainable land use development research program, aims at designing a spatial framework to improve land use planning and development in an environmental context. The research program deals with the problem of land use planning and development in an arid coastal area under environmentally sensitive conditions. The study area is El-Daba'a region, located in the northwestern coast of Egypt, which can be described as a wild area. The approach used in this paper consists of studying the spatial ecological characteristics of El-Daba'a region using different spatial data including maps and land sat remote sensing data. These data are used to create a series of superimposed informative layers managed by a geographic information system (GIS) to describe the spatial ecological characteristics of the study area. The developed GIS allow decision makers to handle large amounts of information simultaneously such as geology, geomorphology, land cover, wild life and many other different information layers. The system is designed to help decision makers to organize, relate, analyze and visualize the ecological data and information in the study area. The developed GIS system might be used to determine the probable effects of building a nuclear power station on the ecosystem. (author)

  2. 78 FR 63501 - Request To Submit a Two-Part Application-Northwest Medical Isotopes, LLC

    Science.gov (United States)

    2013-10-24

    ... new accident precursors are created by allowing an applicant to submit a construction permit... certain regulatory requirements, which, if granted, would allow the submittal of a construction permit... facility applicants subject to 10 CFR 51.20(b) \\1\\ may submit the information required for a construction...

  3. 19 CFR Appendix B to Part 191 - Sample Formats for Applications for Specific Manufacturing Drawback Rulings

    Science.gov (United States)

    2010-04-01

    ... rulings must be submitted to and reviewed and approved by CBP Headquarters. A specific manufacturing... Ruling Under 19 U.S.C. 1313(a) and 1313(b) (Combination) COMPANY LETTERHEAD (Optional) U.S. Customs and.... Customs will not approve an application which shows an unincorporated division or company as the applicant...

  4. 32 CFR Appendix A to Part 270 - Application for Compensation of Vietnamese Commandos

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 2 2010-07-01 2010-07-01 false Application for Compensation of Vietnamese... Vietnamese Commandos All persons applying for payment shall submit a properly completed, signed and notarized Application for Compensation of Vietnamese Commandos, along with corroborating documents and information, to...

  5. Nondestructive Testing of Additive Manufactured Metal Parts Used in Aerospace Applications

    Science.gov (United States)

    Waller, Jess M.

    2018-01-01

    NDE inspectors, QA/QE professionals, and program managers responsible for the out-sourcing, procurement, fabrication, finishing, inspection, and qualification and certification of additively manufactured (AM) parts should attend this course.

  6. Effects of a paraspinal-lumbar tape application during 7 days on the perceived area of tape contact.

    Science.gov (United States)

    Funk, Stefan; Finke, Roy; Zeh, Stefan; Siebert, Tobias; Puta, Christian

    2017-05-01

    The study aimed to investigate the changes of the perceived area of tape contact during a lumbar tape application that lasted 7 days. Single group, repeated measures study. University research laboratory. Twenty-three healthy collegiate students in sports science. Perceived area of tape contact was collected by preparing a drawing of their individual perceived tape outline into a printed body image. Measurements were obtained immediately after fixation of the tape (day 0), at day 3 and day 7 during application and 5 min after the release of the application (day 7). There was no significant change of the perceived area of tape contact after 3 days of tape application. A significant decrease in the perceived area of tape contact was detected 7 days after application (p area of tape contact of healthy sport students is decreased at 7 days. This effect could not be observed at 3 days. These results provide relevant information for the use of elastic tapes concerning the duration of application in medical therapy. Copyright © 2016 Elsevier Ltd. All rights reserved.

  7. IMPLEMENTING AN AUTOMATED SYSTEM TO SIMPLIFY THE DATA MANAGEMENT PROCESS AT PARTS STORAGE AREA OF PT. Z

    Directory of Open Access Journals (Sweden)

    Hery Hamdi Azwir

    2017-07-01

    Full Text Available This research concerns about the design and implementation of a new information system which will simplify the processes of the current system and its impact on the warehouse staffs. In order to automate the processes, a programmed information system is designed using Microsoft excel VBA, a basic programming function inside Microsoft excel. First, the current system is analyzed. Next, the user requirements and proposed system requirements are analyzed to make the system design. Then, the program is developed and tested by using VBA (Visual Basic for Applications. Then, the new system is implemented and the implementation results are analyzed. The results found that the new system successfully fulfilled the objectives of this research and the user requirements, although there are still some improvements which need to be done. During two months’ period of implementation, there are some problems encountered which required the programmer to improve the system. Like every system, there are some advantages and disadvantages found in this new system. Abstrak Penelitian ini fokus kepada  desain dan implementasi sistem informasi baru yang akan mengotomatisasi proses dari sistem saat ini dan dampaknya  terhadap staf gudang. Dalam rangka untuk mengotomatisasi proses, sistem informasi yang terprogram dirancang menggunakan Microsoft excel VBA,sebuah  fungsi dasar pemrograman dalam Microsoft excel. Pertama, sistem yang sekarang dianalisis. Selanjutnya, kebutuhan pengguna dan kebutuhan sistem yang diusulkan dianalisis untuk membuat desain sistem. Kemudian, program ini dikembangkan dan diuji dengan menggunakan VBA (Visual Basic for Applications. Kemudian, sistem baru diimplementasikan dan hasil dari implementasi dianalisis. Hasil penelitian menemukan bahwa sistem baru berhasil memenuhi tujuan penelitian ini dan kebutuhan pengguna, meskipun masih ada beberapa perbaikan yang perlu dilakukan. Selama periode dua bulan implementasi, ada beberapa masalah yang

  8. Resistivity Study of Shallow Aquifers in theParts of Southern Ukanafun Local Government Area, Akwa Ibom State, Nigeria

    Directory of Open Access Journals (Sweden)

    N. J. George

    2010-01-01

    Full Text Available A resistivity study by vertical electrical sounding (VES employing the Schlumberger electrode configuration has been used to delineate shallow aquifers in some villages in Southern Ukanafun Local Government Area of Akwa Ibom State, Southern Nigeria. The information realized from the resistivity data and nearby logged boreholes show that the depths penetrated by currents were all sandy formations with various thicknesses. However, the main aquifers comprise within the maximum current penetration, very coarse – grained (gravelly sand and fine sand with resistivity in the ranges of 4680-30700 Ωm and 207-2530 Ωm and thickness in the ranges of 43-63 m and 18-40 m respectively. The aquifers with minor hydraulic gradient are separated by thin beds of clay according to lithology logs and these beds were masked in the sounding data due to the principle of suppression.

  9. Savannah River Plant 200 Area technical manual. Part SP. Processing of Np/sup 237/ and Pu/sup 238/

    Energy Technology Data Exchange (ETDEWEB)

    Hill, A.J. (comp.)

    1963-01-03

    This manual covers the technology involved in the 200 Area process for the recovery of Np/sup 237/ from certain aqueous waste streams in the separations plants, for the recovery of NP/sup 237/ and Pu/sup 238/ from irradiated NpO/sub 2/-Al slugs and for the fabrication of NpO/sub 2/-Al slugs. The manual contains sections on the fundamental chemistry, the primary recovery of Np by ion exchange, the decontamination of Np by ion exchange, the processing of NpO/sub 2/-Al targets, the separation and purification of Np/sup 237/ and Pu/sup 238/, the finishing of Np, the preparation of NpO/sub 2/, the disposal of spent resin, and the safety aspects of the handling of hydrazine. The section on the fabrication of NpO/sub 2/-Al slugs will be added later. 76 refs., 22 figs.

  10. RIESGO PROFESIONAL DEL ANESTESIÓLOGO y DEL PERSONAL QUE TRABAJA EN EL AREA QUIRÚRGICA. I PARTE

    Directory of Open Access Journals (Sweden)

    Jaime Herrera Pontón

    1985-04-01

    Full Text Available

    PRIMERA PARTE (Este artículo se publica en tres partes, correspondientes a los números 10, 11 Y 12 de la revista

    1. INTRODUCCION. - HISTORIA Y PLANTEAMIENTO DEL PROBLEMA

    Todo oficio o profesión lleva implícito un riesgo inherente a la naturaleza misma de la profesión y el ambiente donde ésta se ejerce. Así el personal que labora en las salas de cirugía en general y el anestesiólogo en particular no podían escapar a esta regla general. Podemos definir la Enfermedad Profesional como el riesgo a enfermarse en el ejercicio de alguna especialidad o profesión con la patología sui generis (1. Aunque hace alrededor de veinte años se creía que los anestésicos inhalatorios no se metabolizaban, la preocupación por los riesgos inherentes a su toxicidad ha existido casi desde su descubrimiento. Ya en 1893 Hewit (2 notó que la descomposición del cloroformo en ácido clorhídrico y fosgeno por acción del gas de iluminación producía tos, irritación orofaringea y cefalea. En 1903 (2 encontró que el éter cloroformo e hidrato de cloral aumentaba la mortalidad producida por el antrax de los cerdos. En 1922 en Editorial de (3 Anesthesiology se reconoce el efecto deletéreo posible por la exposición repetida de los anestésicos. En 1929 Hirsh y Kappus en Alemania (3 hicieron los primeros estudios para conocer la concentración de los anestésicos en el aire de las salas y las primeras encuestas en las que encontraron incidencia de cefaleas y fatiga. En 1944 Ostergren demostró que el óxido nitroso, el cloroformo, el tric1oroetileno y el éter producían paro en la mitosis en metafase (2. Smith y Moya en 1965 llamaron la atención sobre el peligro de teratogenicidad de los anestésicos cuando se usan en mujeres embarazadas...

  11. [REAL AND UNREAL BACKLASHES OF AEROSPACE ACTIVITY FOR THE HEALTH OF POPULATION RESIDING NEAR AREAS OF FALL OF BEING SEPARATED PARTS OF CARRIER ROCKETS].

    Science.gov (United States)

    Meshkov, N A; Valtseva, E A; Kharlamova, E N; Kulikova, A Z

    2015-01-01

    Since the late 1990s, the ongoing debate about the consequences of the rocket-space activities for the health of people residing near areas offall ofseparatingfrom parts of rockets. Some scientists (Kolyado IB et al., 2001, 2013; Shoikhet YN et al., 2005, 2008; Skrebtsova NV 2005, 2006, Sidorov PI et al., 2007) argue that the main cause of morbidity is the effect of unsymmetrical dimethyl hydrazine (UDMH). However, environmentalists find it only in areas offalling fragments of separated parts of carrier rockets. Presented in the article data were obtained as a result of perennial epidemiological and hygienic research. There was performed a hygienic assessment of the content of chemical substances in water soil andfood, nutritional status and health risk near areas of the district of falling 310 and 326. There were studied conditions of work and the health of military personnel at the sites of storage of propellant components. The relationship between revealed diseases and UDMH was not established, but there was their causality due to the influence of environmental factors characteristic of territories and living conditions. In the settlements near the area of falling district 310 the share of extremely anxious persons was shown to be 1.8 times higher than in controls, which is caused by cases of falling fragments stages of carrier rockets in the territory of settlements.

  12. Competitive policies in the Nordic energy research and innovation area - eNERGIA : Part 2: Technology reports

    Energy Technology Data Exchange (ETDEWEB)

    Klitkou, Antje; Pedersen, Trond Einar; Scordato, Lisa; Mariussen, Aage

    2008-07-01

    This (Part 2: Technology reports) is the second report about the results from the eNERGIA project. The first report deals with the countries covered by the eNERGIA project, while the third report sums up the SWOT-analysis, the eNERGIA workshops and the case studies of good practice. A short synthesis report summarises the entire project. This second report mainly deals with selected renewable energy technologies from different perspectives. The report comprises the following nine chapters. Chapter 1 is the presentation of the selected renewable technologies (solar photovoltaic technology, wind technology, 2nd generation bio-energy technology, wave technology and hydroelectric technology) and a subsequent elaboration of the status of the technologies in the Nordic and Baltic countries. Chapter 2 gives an overview of patterns of international R&D collaboration as seen from the countries in question. Chapter 3 draws on technology specific patenting data and bibliometric data, describing the level of technology specific activity in each country. Chapter 4 and 5 describe the status of renewable energy production and renewable energy research respectively in each country. The four last chapters are relatively brief descriptions of the situation in the Nordic and Baltic countries. Chapter 6 gives an overview of the venture capital situation. Chapter 7 is about market regulations and Chapter 8 is about social concerns. Finally, Chapter 9 addresses infrastructural challenges. (Author) 77 figs., 70 tabs

  13. Applicability of `GREATEM' system in mapping geothermal regions in volcanic areas

    Science.gov (United States)

    Verma, S. K.; Mogi, T.; Abd Allah, S.

    2010-12-01

    The ‘GREATEM’ helicopter borne TEM system employs a long grounded cable as transmitter while a light weight receiver coil is flown below a helicopter. This arrangement greatly simplifies the flying logistics and speed of the survey. Also there is very little reduction in the anomaly amplitude when the survey altitude is increased. This is a great advantage particularly in volcanic regions usually having rough topography, as the ‘GREATEM’ survey can be done with helicopter flying at a safe height. Many volcanic areas have anomalous geothermal regions containing hydrothermal fluids. Eruption of volcanoes may cause changes in the thermal character and spatial distribution of these regions. Mapping of these regions is important as they may be associated with hazards. Sometimes, if the temperature is high and volume of the geothermal region is large, they can provide a good source of geothermal energy. Applicability of ‘GREATEM’ system in mapping geothermal regions in volcanic areas is studied by numerical modeling. We have considered a 3D conductor at a shallow depth (50 t0 100m), representing the anomalous geothermal region with dimensions of 500m X 500m X 500m. Different types of geological host environment are considered by varying their resistivities from 10 Ohm.m to 2000 Ohm.m. The ‘GREATEM’ response is analyzed as ‘Percentage Difference (PD)’ over the response produced by the host environment. It is found that the “GREATEM’ system can delineate the geothermal region well. Many geothermal regions are associated with a deeper (> 1 km) reservoir of much larger dimensions. In this situation also it is found that the ‘GREATEM’ system can pick up the response of the shallower geothermal region against the background response of different types of geological host environment containing the deeper reservoir (Figure 1).

  14. Results and exploitation of FP-4 and FP-5 research in the area 'Safety of existing installations'. Part II

    International Nuclear Information System (INIS)

    Goethem, G. van; Zurita, A.; Manolatos, P.; Casalta, S.

    2004-01-01

    An overview is given of the most important achievements of the research programme co-financed by the European Union (EU) in the area of LWR safety over the FP-4 and FP-5 periods from the end-users point of view. The end-users are: the contracting organisations (i.e. utilities and associated engineering companies, regulatory bodies and associated technical safety organisations, manufacturing industry and associated services), the non-contracting organisations (including decision makers and opinion leaders) and the European Commission. Besides Community research strategy and programme implementation aspects in general, this paper is focusing on the S/T achievements obtained by multi-partner projects in the - 7 clusters of multi-partner projects in Euratom FP-4 (1994-1998): AGE for structural ageing, INV and EXV for in-vessel core degradation and ex-vessel molten corium coolability, ST for radiological source term, CONT for containment integrity, AMM for accident management measures and INNO for innovative safety features - the total cost of the 67 multipartner projects comprised in this Community research was Euro 71.3 million, out of which Euro 35.9 million was contributed by the EU budget - 3 clusters of multi-partner projects in Euratom FP-5 (1998-2002): PLEM for plant life extension and management; SAM for severe accident management and EVOL for evolutionary safety concepts - the total cost of the 71 multipartner projects comprised in this Community research is Euro 85.4 million, out of which Euro 43.5 million is contributed by the EU budget. The objectives of this Community research are discussed and a number of FP-4 and FP-5 projects are selected to demonstrate to what extent the proposed objectives were indeed met. Besides technological requirements, socio-economic aspects are becoming increasingly important due to the level of public and political acceptance and to the economic pressure of deregulated electricity markets; this is also discussed. Finally the

  15. Stainless steel electrochemical behaviour - application to the decontamination of steel parts contaminated by tritium

    International Nuclear Information System (INIS)

    Bellanger, G.

    1991-01-01

    This purpose of this work is the study of an electrochemical decontamination process of stainless steel in which tritium is present on the surface of the metal, in the oxide layer and in the metal. We have first investigated the behaviour of the oxide layer. Then we have studied the hydrogen evolution, its diffusion and retrodiffusion in the metal. The results are applied to the decontamination of steel parts contamined by tritium. Part of the tritium can be eliminated by reducing the oxyde layer, which contains large amounts of tritium. However, it is more beneficial to electrolyse at the potential at which the H + ions are reduced. The hydrogen on the steel surface enters in the metal and displaces most of tritium located in the metallic layers near the surface. The tritium surface elimination rate is about 95%. The tritium eliminated through electrolysis is only a small fraction of all the tritium contained in the metal. However, according to conservation experiments of parts after electrolysis, it can be concluded that hydrogen, probably more strongly bound than tritium to steel, forms near the surface a barrier that prevents tritium retrodiffusion. Electrolysis appears as a satisfactory process for the surface decontamination of slightly tritiated steel parts. A decontamination automaton based on the preceding results is described using a pad electrolyser. This type of decontamination is little polluting, and the parts can be recycled after the in situ treatment [fr

  16. 13 CFR 107.20 - Legal basis and applicability of this part 107.

    Science.gov (United States)

    2010-01-01

    ..., as amended. All Licensees must comply with all applicable regulations, accounting guidelines and... supersede existing State law. A party claiming that a conflict exists shall submit an opinion of independent...

  17. Sediment contamination of residential streams in the metropolitan kansas city area, USA: Part II. whole-sediment toxicity to the amphipod hyalella azteca

    Science.gov (United States)

    Tao, J.; Ingersoll, C.G.; Kemble, N.E.; Dias, J.R.; Murowchick, J.B.; Welker, G.; Huggins, D.

    2010-01-01

    This is the second part of a study that evaluates the influence of nonpoint sources on the sediment quality of five adjacent streams within the metropolitan Kansas City area, central United States. Physical, chemical, and toxicity data (Hyalella azteca 28-day whole-sediment toxicity test) for 29 samples collected in 2003 were used for this evaluation, and the potential causes for the toxic effects were explored. The sediments exhibited a low to moderate toxicity, with five samples identified as toxic to H. azteca. Metals did not likely cause the toxicity based on low concentrations of metals in the pore water and elevated concentrations of acid volatile sulfide in the sediments. Although individual polycyclic aromatic hydrocarbons (PAHs) frequently exceeded effect-based sediment quality guidelines [probable effect concentrations (PECs)], only four of the samples had a PEC quotient (PEC-Q) for total PAHs over 1.0 and only one of these four samples was identified as toxic. For the mean PEC-Q for organochlorine compounds (chlordane, dieldrin, sum DDEs), 4 of the 12 samples with a mean PEC-Q above 1.0 were toxic and 4 of the 8 samples with a mean PEC-Q above 3.0 were toxic. Additionally, four of eight samples were toxic, with a mean PEC-Q above 1.0 based on metals, PAHs, polychlorinated biphenyls (PCBs), and organochlorine pesticides. The increase in the incidence of toxicity with the increase in the mean PEC-Q based on organochlorine pesticides or based on metals, PAHs, PCBs, and organochlorine pesticides suggests that organochlorine pesticides might have contributed to the observed toxicity and that the use of a mean PEC-Q, rather than PEC-Qs for individual compounds, might be more informative in predicting toxic effects. Our study shows that stream sediments subject to predominant nonpoint sources contamination can be toxic and that many factors, including analysis of a full suite of PAHs and pesticides of both past and present urban applications and the origins of

  18. Impact of different parts of unpaved forest roads on runoff and sediment yield in a Mediterranean area.

    Science.gov (United States)

    Jordán-López, Antonio; Martínez-Zavala, Lorena; Bellinfante, Nicolás

    2009-01-01

    Surface runoff and sediment production on unpaved forest roads in a humid Mediterranean mountainous area has been studied using a simple portable rainfall simulator at an intensity of 90 mm h(-1). Thirty six rainfall simulations were carried out on road plots: on the roadbank (12), on the sidecast fill (12), and on the roadbed (12). On the roadbanks, the steady-state runoff coefficient was 85.9% and runoff flow appeared after 63 s on average. On the sidecast fills, the steady-state runoff coefficient was 58.6% and mean time to runoff was 48 s. Finally, on the roadbeds, the steady-state runoff coefficient was 21.5% and mean time to runoff was 41 s. The highest soil loss rate was found on the roadbanks (486.7 g m(-2)), mainly due to low plant cover, soil texture and rock fragments. The total soil erosion on the roadbanks was 3 and 18 times higher than those from the roadbeds and the sidecast fills, respectively. As a consequence, roadbanks can be considered the main source of sediments on the studied sites, but the function of unpaved forest roads as source points for runoff generation is more important.

  19. Risk mitigation process for utilization of commercial off-the-shelf (COTS) parts in CCD camera for military applications

    Science.gov (United States)

    Ahmad, Anees; Batcheldor, Scott; Cannon, Steven C.; Roberts, Thomas E.

    2002-09-01

    This paper presents the lessons learned during the design and development of a high performance cooled CCD camera for military applications utilizing common commercial off the shelf (COTS) parts. Our experience showed that concurrent evaluation and testing of high risk COTS must be performed to assess their performance over the required temperature range and other special product requirements such as fuel vapor compatibility, EMI and shock susceptibility, etc. Technical, cost and schedule risks for COTS parts must also be carefully evaluated. The customer must be involved in the selection and evaluation of such parts so that the performance limitations of the selected parts are clearly understood. It is equally important to check with vendors on the availability and obsolescence of the COTS parts being considered since the electronic components are often replaced by newer, better and cheaper models in a couple of years. In summary, this paper addresses the major benefits and risks associated with using commercial and industrial parts in military products, and suggests a risk mitigation approach to ensure a smooth development phase, and predictable performance from the end product.

  20. Logic For Qualification And Industrialisation Of Additive Layer Manufacturing Parts For Spatial Application

    Science.gov (United States)

    Brindeau, Aymeric; Lopes, Jean-Louis; Brivot, Frederic; Bourneaud, Florent; Desagulier, Christian

    2012-07-01

    ASTRIUM Space Transportation has been manufacturing composite equipments for satellite for 25 years. For this business, the development of Additive Layer Manufacturing (ALM) processes has been identified as a real opportunity to improve design and performances. For satellite equipments, ASTRIUM ST has chosen to investigate in the Electron Beam Melting process (patented EBM® process from Arcam AB company) for the manufacturing of Titanium parts, in collaboration with MECACHROME who has developed strong skills in this ALM process. This first development step has been achieved by introducing a titanium part realised by EBM on an equipment of Atlantic Bird 7 satellite launched in September 2011. The new step consists in the formal industrialisation of the EBM process for the procurement of titanium parts for satellite equipments. The present paper describes the logic retained for this industrialisation. It includes the technical requirements but also the verifications and inspections which have to be performed to guarantee that technical requirements are met.

  1. Transferring diffractive optics from research to commercial applications: Part I - progress in the patent landscape

    Science.gov (United States)

    Brunner, Robert

    2013-12-01

    In the last 20 years, diffractive optics experienced a strong research interest and was in the center of many development projects in applied optics. To offer a side view for optical engineers, here, we discuss selected, business-related aspects of the current status of the transfer process to bring diffractive optics into commercial products. The contribution is divided into two parts. Here, in part I, we focus on the patent landscape of diffractive optics with a closer look on the temporal development and the distribution over main players. As an important result, currently, new strong patent activities are observed especially in the context of imaging systems. In the second part, the business volumes of selected market segments are discussed.

  2. Tsunami evacuation analysis, modelling and planning: application to the coastal area of El Salvador

    Science.gov (United States)

    Gonzalez-Riancho, Pino; Aguirre-Ayerbe, Ignacio; Aniel-Quiroga, Iñigo; Abad Herrero, Sheila; González Rodriguez, Mauricio; Larreynaga, Jeniffer; Gavidia, Francisco; Quetzalcoalt Gutiérrez, Omar; Álvarez-Gómez, Jose Antonio; Medina Santamaría, Raúl

    2014-05-01

    Advances in the understanding and prediction of tsunami impacts allow the development of risk reduction strategies for tsunami-prone areas. Conducting adequate tsunami risk assessments is essential, as the hazard, vulnerability and risk assessment results allow the identification of adequate, site-specific and vulnerability-oriented risk management options, with the formulation of a tsunami evacuation plan being one of the main expected results. An evacuation plan requires the analysis of the territory and an evaluation of the relevant elements (hazard, population, evacuation routes, and shelters), the modelling of the evacuation, and the proposal of alternatives for those communities located in areas with limited opportunities for evacuation. Evacuation plans, which are developed by the responsible authorities and decision makers, would benefit from a clear and straightforward connection between the scientific and technical information from tsunami risk assessments and the subsequent risk reduction options. Scientifically-based evacuation plans would translate into benefits for the society in terms of mortality reduction. This work presents a comprehensive framework for the formulation of tsunami evacuation plans based on tsunami vulnerability assessment and evacuation modelling. This framework considers (i) the hazard aspects (tsunami flooding characteristics and arrival time), (ii) the characteristics of the exposed area (people, shelters and road network), (iii) the current tsunami warning procedures and timing, (iv) the time needed to evacuate the population, and (v) the identification of measures to improve the evacuation process, such as the potential location for vertical evacuation shelters and alternative routes. The proposed methodological framework aims to bridge the gap between risk assessment and risk management in terms of tsunami evacuation, as it allows for an estimation of the degree of evacuation success of specific management options, as well as

  3. Evaluation of Cloud-Resolving and Limited Area Model Intercomparison Simulations Using TWP-ICE Observations. Part 2 ; Precipitation Microphysics

    Science.gov (United States)

    Varble, Adam; Zipser, Edward J.; Fridland, Ann M.; Zhu, Ping; Ackerman, Andrew S.; Chaboureau, Jean-Pierre; Fan, Jiwen; Hill, Adrian; Shipway, Ben; Williams, Christopher

    2014-01-01

    Ten 3-D cloud-resolving model (CRM) simulations and four 3-D limited area model (LAM) simulations of an intense mesoscale convective system observed on 23-24 January 2006 during the Tropical Warm Pool-International Cloud Experiment (TWP-ICE) are compared with each other and with observations and retrievals from a scanning polarimetric radar, colocated UHF and VHF vertical profilers, and a Joss-Waldvogel disdrometer in an attempt to explain a low bias in simulated stratiform rainfall. Despite different forcing methodologies, similar precipitation microphysics errors appear in CRMs and LAMs with differences that depend on the details of the bulk microphysics scheme used. One-moment schemes produce too many small raindrops, which biases Doppler velocities low, but produces rainwater contents (RWCs) that are similar to observed. Two-moment rain schemes with a gamma shape parameter (mu) of 0 produce excessive size sorting, which leads to larger Doppler velocities than those produced in one-moment schemes but lower RWCs. Two-moment schemes also produce a convective median volume diameter distribution that is too broad relative to observations and, thus, may have issues balancing raindrop formation, collision-coalescence, and raindrop breakup. Assuming a mu of 2.5 rather than 0 for the raindrop size distribution improves one-moment scheme biases, and allowing mu to have values greater than 0 may improve excessive size sorting in two-moment schemes. Underpredicted stratiform rain rates are associated with underpredicted ice water contents at the melting level rather than excessive rain evaporation, in turn likely associated with convective detrainment that is too high in the troposphere and mesoscale circulations that are too weak. A limited domain size also prevents a large, well-developed stratiform region like the one observed from developing in CRMs, although LAMs also fail to produce such a region.

  4. Computer-based applications aimed at youth and adults with intellectual disability for the development of support areas

    Directory of Open Access Journals (Sweden)

    Maria Esther BAÑOS GARCÍA

    2018-03-01

    Full Text Available The use of Information and Communication Technologies is widely spread in all fields, including education. In the case of young people and adults with intellectual disabilities, it seems obvious that applications should serve to improve those supports to provide in the different functional areas. In this manuscript, 56 computer applications, in English and/or in Spanish, have been found by means of the search and study of reviews, scientific articles and web pages. Then, its connection with the support areas was evaluated by identifying the link for each computer application with each of the nine support areas. The findings confirm that the digital divide continues to increase and, in some cases, the treatment of the proposed activities promoting a childlike picture of this group is maintained. We found a low level of awareness of the support areas among developers and an imbalance in the applications, since some areas have great coverage while others have a residual presence. Promoting the consideration of the support areas among developers and further training for both educators and youth and adults with intellectual disabilities in order to reach a more productive use of ICT is recommended.

  5. Wide area measurement system for smart grid applications involving hybrid energy sources

    Energy Technology Data Exchange (ETDEWEB)

    Amin, Mahmoud M.; Moussa, Heba B.; Mohammed, Osama A. [Florida International University, Energy Systems Research Laboratory, Department of Electrical and Computer Engineering, Miami, FL (United States)

    2012-03-15

    This paper presents a model and experimental verification for a complete scenario of a proposed wide area measurement system (WAMS) based on synchronized phasor measurement units (PMUs). The proposed system is feasible for hybrid smart ac/dc power networks; such as grid-connected PV-power plants. The purpose is to increase the overall system reliability for all power stages via significant dependence on WAMS as distributed intelligence agents with improved monitoring, protection, and control capabilities of the power networks. The developed system is simulated in the Matlab/Simulink environment. The system was tested under two different cases; normal operation and fault state. Furthermore, the proposed WAMS was experimentally validated with results obtained from a reduced scale setup which built and tested in the laboratory based on the Hardware-in-the-loop concept. It was verified that the power system status can be easily monitored and controlled in real time by using the measured bus data in real time. This improves the overall system reliability and avoids cascaded blackout during fault occurrence. The simulation and experimental results confirm the validity of the proposed WAMS technology for smart grid applications. (orig.)

  6. Application of preliminary risk analysis at marble finishing plants in Recife's metropolitan area.

    Science.gov (United States)

    de Melo Neto, Rútilo P; Kohlman Rabbani, Emilia R

    2012-01-01

    The finishing of marble occurs in quarries all over Brazil, being the most significant dimension of the ornamental stone sector, with 7,000 businesses. Recife's Metropolitan Area (RMR) contains approximately 106 marble quarries, 25 of them unionized. The study focused on the application of Preliminary Risk Analysis, conducted at two unionized quarries: M1, a small business; and the second, M2, considered a micro enterprise. In this analysis both the administrative and the productive sectors were evaluated. The fieldwork was done in the month of December 2010. The study revealed that the two quarries carried moderate risks in the administrative sector, mainly due to ergonomic factors, and that in the productive sectors the risks were high, specifically because of excess noise, dust material, and precarious electrical installations. Using the results of the qualitative analysis as a base, the need for quantitative study presents itself in order to determine the most adequate modes of protection to be of assistance in the management of these risks, guaranteeing the safety and health of the worker and consequently the improvement in productivity in this sector.

  7. Mathematical model of small water-plane area twin-hull and application in marine simulator

    Science.gov (United States)

    Zhang, Xiufeng; Lyu, Zhenwang; Yin, Yong; Jin, Yicheng

    2013-09-01

    Small water-plane area twin-hull (SWATH) has drawn the attention of many researchers due to its good sea-keeping ability. In this paper, MMG's idea of separation was used to perform SWATH movement modeling and simulation; respectively the forces and moment of SWATH were divided into bare hull, propeller, rudder at the fluid hydrodynamics, etc. Wake coefficient at the propellers which reduces thrust coefficient, and rudder mutual interference forces among the hull and propeller, for the calculation of SWATH, were all considered. The fourth-order Runge-Kutta method of integration was used by solving differential equations, in order to get SWATH's movement states. As an example, a turning test at full speed and full starboard rudder of `Seagull' craft is shown. The simulation results show the SWATH's regular pattern and trend of motion. It verifies the correctness of the mathematical model of the turning movement. The SWATH's mathematical model is applied to marine simulator in order to train the pilots or seamen, or safety assessment for ocean engineering project. Lastly, the full mission navigation simulating system (FMNSS) was determined to be a successful virtual reality technology application sample in the field of navigation simulation.

  8. Analysis of the analytic formulae application area for free oscillation frequency calculation in isochronous cyclotrons

    International Nuclear Information System (INIS)

    Kiyan, I.N.; Taraszkiewicz, R.

    2005-01-01

    Selection of optimal analytic formulae for calculation of free oscillation frequencies of the particles in isochronous cyclotrons, ν r (r) and ν z (r), and their application area are described. The selected formulae are used in the program BORP SR - Betatron Oscillation Research Program Second Release - written in C++ with the help of MS Visual C++ .NET. The free oscillation frequencies, calculated by using the program, are used for the evaluation of the modeled regimes of the work of the AIC144 isochronous cyclotron. The analytic formulae were selected by comparing the results of the calculations performed by using formulae adduced by T.Stammbach, Y.Jongen - S.Zaremba, V.V.Kolga with the results of the calculations performed by using the CYCLOPS iterative program, developed by M.M.Gordon. The least difference in the calculation results was obtained for the analytic formulae adduced by V.V.Kolga. The ν r (r) calculation difference ranged from -0.5 to 1.5% and the ν z (r) calculation difference ranged from -5 to 4% for the working radii of the isochronous cyclotron. As the beam was obtained, the selected analytic formulae can be successfully used in the program BORP SR for free oscillation frequency calculation during the evaluation of the modeled regimes of the work of different isochronous cyclotrons

  9. Securing While Sampling in Wireless Body Area Networks With Application to Electrocardiography.

    Science.gov (United States)

    Dautov, Ruslan; Tsouri, Gill R

    2016-01-01

    Stringent resource constraints and broadcast transmission in wireless body area network raise serious security concerns when employed in biomedical applications. Protecting data transmission where any minor alteration is potentially harmful is of significant importance in healthcare. Traditional security methods based on public or private key infrastructure require considerable memory and computational resources, and present an implementation obstacle in compact sensor nodes. This paper proposes a lightweight encryption framework augmenting compressed sensing with wireless physical layer security. Augmenting compressed sensing to secure information is based on the use of the measurement matrix as an encryption key, and allows for incorporating security in addition to compression at the time of sampling an analog signal. The proposed approach eliminates the need for a separate encryption algorithm, as well as the predeployment of a key thereby conserving sensor node's limited resources. The proposed framework is evaluated using analysis, simulation, and experimentation applied to a wireless electrocardiogram setup consisting of a sensor node, an access point, and an eavesdropper performing a proximity attack. Results show that legitimate communication is reliable and secure given that the eavesdropper is located at a reasonable distance from the sensor node and the access point.

  10. 47 CFR Appendix B to Part 400 - Initial Certification for E-911 Grant Applicants

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 5 2010-10-01 2010-10-01 false Initial Certification for E-911 Grant... ADMINISTRATION, DEPARTMENT OF COMMERCE, AND NATIONAL HIGHWAY TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION E-911 GRANT PROGRAM Pt. 400, App. B Appendix B to Part 400—Initial Certification for E-911 Grant...

  11. Developing and Using Ada Parts in Real-Time Embedded Applications

    Science.gov (United States)

    1990-04-27

    ARCHTECTURAL DESIGN Guideline #3-a: Avoid duplication of data types packages. Guideline #3-b: Minimize variant proliferation. Concentrate on developing a...of SOFTWARE REUSE DEVELOPING and USING ADA PARTS in RTE APPUCATIONS ARCHTECTURAL DESIGN Table 5-10 illustrates the use of this more strongly data typed

  12. 78 FR 76702 - Parts and Accessories Necessary for Safe Operation; Application for an Exemption From Volvo...

    Science.gov (United States)

    2013-12-18

    ... from a truck. Therefore, we request the installation of the camera on the lower part of the windshield... [the] NHTSA Bus Safety plan as it already did for several other safety features. The camera must be...) the camera would be more in the field of view of the driver. Volvo/Prevost states that if the...

  13. Document control system as an integral part of RA documentation database application

    International Nuclear Information System (INIS)

    Steljic, M.M; Ljubenov, V.Lj. . E-mail address of corresponding author: milijanas@vin.bg.ac.yu; Steljic, M.M.)

    2005-01-01

    The decision about the final shutdown of the RA research reactor in Vinca Institute has been brought in 2002, and therefore the preparations for its decommissioning have begun. All activities are supervised by the International Atomic Energy Agency (IAEA), which also provides technical and experts' support. This paper describes the document control system is an integral part of the existing RA documentation database. (author)

  14. Sintering of Multilayered Porous Structures: Part II – Experiments and Model Applications

    DEFF Research Database (Denmark)

    Ni, De Wei; Olevsky, Eugene; Esposito, Vincenzo

    2013-01-01

    Experimental analyses of shrinkage and distortion kinetics during sintering of bilayered porous and dense gadolinium-doped ceria Ce0.9Gd0.1O1.95d structures are carried out, and compared with the theoretical models developed in Part I of this work. A novel approach is developed for the determinat...

  15. Effects of highway-deicer application on ground-water quality in a part of the Calumet Aquifer, northwestern Indiana

    Science.gov (United States)

    Watson, Lee R.; Bayless, E. Randall; Buszka, Paul M.; Wilson, John T.

    2002-01-01

    The effects of highway-deicer application on ground-water quality were studied at a site in northwestern Indiana using a variety of geochemical indicators. Site characteristics such as high snowfall rates; large quantities of applied deicers; presence of a high-traffic highway; a homogeneous, permeable, and unconfined aquifer; a shallow water table; a known ground-water-flow direction; and minimal potential for other sources of chloride and sodium to complicate source interpretation were used to select a study area where ground water was likely to be affected by deicer application. Forty-three monitoring wells were installed in an unconfined sand aquifer (the Calumet aquifer) near Beverly Shores in northwestern Indiana. Wells were installed along two transects that approximately paralleled groundwater flow in the Calumet aquifer and crossed US?12. US?12 is a highway that receives Indiana?s highest level of maintenance to maintain safe driving conditions. Ground-water quality and water-level data were collected from the monitoring wells, and precipitation and salt-application data were compiled from 1994 through 1997. The water-quality data indicated that chloride was the most easily traced indicator of highway deicers in ground water. Concentration ratios of chloride to iodide and chloride to bromide and Stiff diagrams of major element concentrations indicated that the principal source of chloride and sodium in ground water from the uppermost one-third to one-half of the Calumet relative electromagnetic conductivity defined a distinct plume of deicer-affected water in the uppermost 8 feet of aquifer at about 9 feet horizontally from the paved roadway edge and a zone of higher conductivity than background in the lower one-third of the aquifer. Chloride and sodium in the deep parts of the aquifer originated from natural sources. Chloride and sodium from highway deicers were present in the aquifer throughout the year. The highest concentrations of chloride and sodium

  16. Geologic framework and hydrogeologic characteristics in the southern part of the Rancho Diana Natural Area, northern Bexar County, Texas, 2008-10

    Science.gov (United States)

    Clark, Allan K.; Morris, Robert R.

    2011-01-01

    The area designated by the city of San Antonio as the Rancho Diana Natural Area is in northern Bexar County, near San Antonio, Texas. During 2008-10, the U.S. Geological Survey, in cooperation with the city of San Antonio, documented the geologic framework and mapped the hydrogeologic characteristics for the southern part of the Rancho Diana Natural Area. The geologic framework of the study area and its hydrogeologic characteristics were documented using field observations and information from previously published reports. Many of the geologic and hydrogeologic features were found by making field observations through the dense vegetation along gridlines spaced approximately 25 feet apart and documenting the features as they were located. Surface geologic features were identified and hydrogeologic features such as caves, sinkholes, and areas of solutionally enlarged porosity were located using hand-held Global Positioning System units. The location data were used to create a map of the hydrogeologic subdivisions and the location of karst features. The outcrops of the Edwards and Trinity aquifer recharge zones were mapped by using hydrogeologic subdivisions modified from previous reports. All rocks exposed within the study area are of sedimentary origin and Lower Cretaceous in age. The valley floor is formed in the cavernous member of the upper Glen Rose Limestone of the Trinity Group. The hills are composed of the basal nodular member, dolomitic member, Kirschberg evaporite member, and grainstone member of the Kainer Formation of the Edwards Group. Field observations made during this study of the exposed formations and members indicate that the formations and members typically are composed of mudstones, wackestones, packstones, grainstones, and argillaceous limestones, along with marls. The upper Glen Rose Limestone is approximately 410 to 450 feet thick but only the upper 70 feet is exposed in the study area. The Kainer Formation is approximately 255 feet thick in

  17. Contribution to fauna of invertebrates of sink holes within the agricultural landscape of the Moravian Karst Protected Area. Part one: Carabidae (Coleoptera

    Directory of Open Access Journals (Sweden)

    Jana Horáková

    2005-01-01

    Full Text Available The epigeic fauna in the sink holes was studied using formaldehyde ground traps at 14-day intervals from April to October in 2002 and 2003. A total of 5 transects of traps have been installed within 5 selected areas of the northern part of the Moravian Karst. Areas within the district of Vilémovice, Lažánky and Ostrov near Macocha villages have been studied in particular. Sink holes have been selected on the basis of how they are probably influenced by human activities (types such as regularly mown sink holes within a thoroughly exploited field – 1, sink holes partially or totally overgrown by shrubs – 3 and 2, sink holes with fully developed trees – 4, sink holes within an intensely exploited meadow – 5.It was the aim of this study to determine the species composition of individual areas, numbers of individual species, differences among areas characterised by synoecological characteristics such as the dominance, Shannon-Wieneręs index of species diversity, equitability, Jaccardęs index of similarity and to try to express the degree of anthropogenic influence. Similarity of individual areas has also been evaluated by means of the cluster analysis (on the basis of the Jaccardęs index.Eudominant species were Abax parallelepipedus, Anchomenus dorsalis, Carabus ullrichi, Microlestes maurus, Poecilus cupreus and Pterostichus melanarius. Species such as Aptinus bombarda, Licinus depressus, Molops elatus and Syntomus obscuroguttatus were the most important ones. The highest and lowest values of the index of species diversity were found in the area No. 4, and 1 and 2, respectively. Equitability was the highest and the lowest in the area No. 4 and 1, respectively. According to the Jaccardęs index, areas No. 2 and 3, and No. 1 and 4 were the most and least similar ones, respectively. A total of 53.3%, 45.6% and 1.1% of species could, be classified as belonging to the group E, A and R, respectively. The group E represents eurytopic species

  18. Determining personal talents and behavioral styles of applicants to surgical training: a new look at an old problem, part II.

    Science.gov (United States)

    Bell, Richard M; Fann, Stephen A; Morrison, James E; Lisk, J Ryan

    2012-01-01

    The selection of applicants for training in any particular surgical program is an imprecise exercise. Despite the abundance of information on particular candidates, many of the fundamental qualities that are associated with success for the surgical trainee cannot be identified by review of the applicants' grades, scores, letters of recommendation, personal statement, or even from the interview process. We sought a method to determine behavior, motivation, and values possessed by applicants that coincided with traits by our current residents who had demonstrated success in our program. The methods have been described in detail in Part I.(1) Briefly, the individual applicants' personal talent report was used to develop a rank-ordered list by the outside consultant and was compared to the traditionally developed rank list developed by the Department in the traditional fashion and the newly developed job benchmark. Five hundred thirty-five applications were received and interviews were offered to 112 (21%) applicants. Seventy-five on-line surveys were completed by the 77 applicants who were interviewed. The consultant was able to identify important personal talents, elements of motivation, and behavioral style that were not gleaned from the application or the interview process, some of which prompted a revision of our final ranking order.(1) This report discusses the results of the motivational analysis and of the Personal Talents Skills Inventory. Applicants with a strong motivation for the theoretical (knowledge) and social commitment (desire to help others) are important characteristics. Clear views of the external world and of self, as well as a sense of satisfaction with the applicants' vision of their future are positively associated with success in our program. The ability to identify unique behavioral, motivational and personal talents that applicants bring to the program that were not identifiable from the traditional application and interview process has

  19. 76 FR 20962 - Applications for New Awards; Native American-Serving Nontribal Institutions Part F Program

    Science.gov (United States)

    2011-04-14

    ... Indian tribes. II. Award Information Type of Award: Discretionary grants. Estimated Available Funds: $5... application narrative may be single spaced and will count toward the page limit. Use a font that is either 12-point or larger or no smaller than 10 pitch (characters per inch). However, you may use a 10-point font...

  20. 17 CFR Appendix A to Part 39 - Application Guidance and Compliance With Core Principles

    Science.gov (United States)

    2010-04-01

    ... demonstrate that the applicant has adequate financial, operational, and managerial resources to discharge the.../participants, and whether margin levels, position limits and other controls would vary in accordance with these... management tools such as stress testing and value at risk calculations; and c. What contingency plans the...

  1. Solid State nuclear track detector - [Part] III : applications in science and technology

    International Nuclear Information System (INIS)

    Lal, Nand

    1992-01-01

    The present article describes the applications of solid state nuclear track detection techniques in different branches of science (e.g. life sciences, nuclear physics, cosmic ray and solar physics, earth sciences, teaching laboratories) and technology with selected examples from voluminous literature available on the subject. (author). 28 refs., 6 figs., 3 tabs

  2. 14 CFR Appendix A to Part 129 - Application for Operations Specifications by Foreign Air Carriers

    Science.gov (United States)

    2010-01-01

    .... Operations. State whether the operation proposed is day or night, visual flight rules, instrument flight...). Sec. IV. Communications facilities. List all communication facilities to be used by the applicant in... English language to a degree necessary to enable them to properly communicate with Airport Traffic Control...

  3. Application of fuzzy analytic network process for barrier evaluation in automotive parts remanufacturing towards cleaner production

    DEFF Research Database (Denmark)

    Govindan, Kannan; Shankar, Madan; Kannan, Devika

    2016-01-01

    to hidden facts. Many researchers have explored such hidden facts in auto parts remanufacturing in developing nations and their emerging economies. However, there is a huge gap in the state-of-the-art remanufacturing practices in India, despite India's strong advancements in the automobile industry. In fact......, India's automobile industry is rapidly approaching that of China's in recent years. Although some studies are available regarding remanufacturing implementation, current research has generally failed to offer a deep analysis of the factors and barriers that exist as hurdles to such implementation....... Consequently, this paper attempts to investigate the essential barrier to auto parts remanufacturing in an Indian scenario, and we also address vital interrelationships and interdependencies. To achieve the aim of the study, a model framework is proposed and applied to an Indian case industry. The data...

  4. 33 CFR Appendix B to Part 263 - Application of Multiobjective Planning Framework to Continuing Authorities Program

    Science.gov (United States)

    2010-07-01

    ... to analyze the need for a project, to develop sketch plans, discuss views and capabilities of local interests, and identify the economy of the potential project area and possible environmental issues that... estimated cost of the study. The latter identification process can be developed as a Plan of Study for the...

  5. Workshop: Market Mechanisms and Incentives: Applications to Environmental Policy (2009-part 3)

    Science.gov (United States)

    Presentations on the use of market mechanisms and incentives in the areas of fuel economy, water quality, land use and the distributional consequences of using market incentives. There was also a panel discussion on the role of market mechanisms on climate

  6. Casting of microstructured shark skin surfaces and possible applications on aluminum casting parts

    Directory of Open Access Journals (Sweden)

    Todor Ivanov

    2011-02-01

    Full Text Available Within the project Functional Surfaces via Micro- and Nanoscaled Structures?which is part of the Cluster of Excellence 揑ntegrative Production Technology?established and financed by the German Research Foundation (DFG, an investment casting process to produce 3-dimensional functional surfaces down to a structural size of 1 μm on near-net-shape-casting parts has been developed. The common way to realize functional microstructures on metallic surfaces is to use laser ablation, electro discharge machining or micro milling. The handicap of these processes is their limited productivity. The approach of this project to raise the efficiency is to use the investment casting process to replicate microstructured surfaces by moulding from a laser-microstructured grand master pattern. The main research objective deals with the investigation of the single process steps of the investment casting process with regard to the moulding accuracy. Actual results concerning making of the wax pattern, suitability of ceramic mould and core materials for casting of an AlSi7Mg0.3 alloy as well as the knock-out behavior of the shells are presented. By using of the example of an intake manifold of a gasoline race car engine, a technical shark skin surface has been realized to reduce the drag of the intake air. The intake manifold consists of an air-restrictor with a defined inner diameter which is microstructured with technical shark skin riblets. For this reason the inner diameter cannot be drilled after casting and demands a very high accuracy of the casting part. A technology for the fabrication and demoulding of accurate microstructured castings are shown. Shrinkage factors of different moulding steps of the macroscopic casting part as well as the microscopic riblet structure have been examined as well.

  7. Applicability of chemical vapour polishing of additive manufactured parts to meet production-quality

    DEFF Research Database (Denmark)

    Pedersen, D. B.; Hansen, H. N.; Nielsen, J. S.

    2014-01-01

    The Fused Deposition Modelling (FDM) method is the most rapidly growing Additive Manufacturing (AM) method[1]. FDM employs a 2.5D deposition scheme which induce a step-ladder shaped surface definition [2], with seams of the individual layers clearly visible[3]. This paper investigate to which...... of FDM manufactured parts can be taken from their current quality into the precision engineering domain....

  8. Manufacturability evaluation for molded parts using fictitious physical models, and its application in topology optimization

    OpenAIRE

    Sato, Yuki; Yamada, Takayuki; Izui, Kazuhiro; Nishiwaki, Shinji

    2017-01-01

    Manufacturing methods using molds, such as casting and injection molding, are widely used in industries. A basic requirement when using such manufacturing methods is that design engineers must design products so that they incorporate certain geometrical features that allow the mold parts to be removed from the created solid object. In the present study, we propose a manufacturability evaluation method especially adapted for the use of molds. To evaluate the manufacturability, we introduce fic...

  9. Generalized Equations and Their Solutions. Part 2. Applications to Nonlinear Programming

    Science.gov (United States)

    1980-03-01

    support from the Centre National de la Recherche Scientifique, and at the Departamento de Matematicas y Ciencias de la Computaci6 n, Universidad Simon...7901066. Parts of the research for this paper were carried out at the Departement de Mathematiques elaD n Uversite Paris-IX Dauphine, with financial...Bolivar, Caracas, Venezuela, with support from the United Nations Educational, Scientific and Cultural Organization under Proyecto UNESCO VEN-77-002. The

  10. Translational Radiomics: Defining the Strategy Pipeline and Considerations for Application-Part 2: From Clinical Implementation to Enterprise.

    Science.gov (United States)

    Shaikh, Faiq; Franc, Benjamin; Allen, Erastus; Sala, Evis; Awan, Omer; Hendrata, Kenneth; Halabi, Safwan; Mohiuddin, Sohaib; Malik, Sana; Hadley, Dexter; Shrestha, Rasu

    2018-03-01

    Enterprise imaging has channeled various technological innovations to the field of clinical radiology, ranging from advanced imaging equipment and postacquisition iterative reconstruction tools to image analysis and computer-aided detection tools. More recently, the advancement in the field of quantitative image analysis coupled with machine learning-based data analytics, classification, and integration has ushered in the era of radiomics, a paradigm shift that holds tremendous potential in clinical decision support as well as drug discovery. However, there are important issues to consider to incorporate radiomics into a clinically applicable system and a commercially viable solution. In this two-part series, we offer insights into the development of the translational pipeline for radiomics from methodology to clinical implementation (Part 1) and from that point to enterprise development (Part 2). In Part 2 of this two-part series, we study the components of the strategy pipeline, from clinical implementation to building enterprise solutions. Copyright © 2017 American College of Radiology. Published by Elsevier Inc. All rights reserved.

  11. Solving a mathematical model integrating unequal-area facilities layout and part scheduling in a cellular manufacturing system by a genetic algorithm.

    Science.gov (United States)

    Ebrahimi, Ahmad; Kia, Reza; Komijan, Alireza Rashidi

    2016-01-01

    In this article, a novel integrated mixed-integer nonlinear programming model is presented for designing a cellular manufacturing system (CMS) considering machine layout and part scheduling problems simultaneously as interrelated decisions. The integrated CMS model is formulated to incorporate several design features including part due date, material handling time, operation sequence, processing time, an intra-cell layout of unequal-area facilities, and part scheduling. The objective function is to minimize makespan, tardiness penalties, and material handling costs of inter-cell and intra-cell movements. Two numerical examples are solved by the Lingo software to illustrate the results obtained by the incorporated features. In order to assess the effects and importance of integration of machine layout and part scheduling in designing a CMS, two approaches, sequentially and concurrent are investigated and the improvement resulted from a concurrent approach is revealed. Also, due to the NP-hardness of the integrated model, an efficient genetic algorithm is designed. As a consequence, computational results of this study indicate that the best solutions found by GA are better than the solutions found by B&B in much less time for both sequential and concurrent approaches. Moreover, the comparisons between the objective function values (OFVs) obtained by sequential and concurrent approaches demonstrate that the OFV improvement is averagely around 17 % by GA and 14 % by B&B.

  12. The neighbor enclosed area tracking algorithm and its application to cyclone merger in the midlatitudes

    Science.gov (United States)

    Inatsu, Masaru; Amada, Shotarou; Satake, Yuya

    2010-05-01

    The neighbor enclosed area tracking (NEAT) algorithm is proposed as an alternative method to conventional point-to-point cyclone tracking approaches. Most automated Lagrangian tracking algorithms contain three procedures: cyclone identification, cyclone tracking, and quantification of cyclone intensity and activity. The cyclone identification was simply based on a comparison of neighboring grid points; cyclone tracking mainly employed a near-neighbor point search to neighbor-time cyclone-center datasets; and cyclone intensity and activity are mainly quantified as cyclone track density, and other accompanying products such as genesis and lysis densities, mean lifetime, average moving vector, and mean growth rate can also be obtained in the final procedure. But a crucial problem in the above technique is its requirement of some complicated connecting conditions for near-neighbor tracking. To overcome the problem, NEAT completes cyclone identification and cyclone tracking in a single process of equivalent labeling for spatiotemporally connected domains, i.e., if two spatially enclosed areas in a neighboring time frame overlap, they should be connected. NEAT enables us to count the genesis and tracks of individual cyclones as the conventional tracking. Moreover, NEAT has the ability to produce fruitful information on cyclone mergers and separations, cyclone shape, and material transport by individual eddies (the latter two features will be reported elsewhere). There are many possible applications of NEAT to meteorology and oceanography, but now we focus on the situation, well-known by Japanese synopticians, that two cyclones pass respectively over the north and south of Japan and then they frequently merge and are rapidly deepened in the western Pacific. For the case, the southern cyclones tend to be stimulated just above the sea surface temperature front to the north of oceanic western boundary currents, while the northern cyclones, moving eastward along the polar

  13. Truck-mounted Area-wide Application of Pyriproxyfen Targeting Aedes aegypti and Aedes albopictus in Northeast Florida

    Science.gov (United States)

    2014-12-01

    TRUCK-MOUNTED AREA-WIDE APPLICATION OF PYRIPROXYFEN TARGETING AEDES AEGYPTI AND AEDES ALBOPICTUS IN NORTHEAST FLORIDA1 CARL W. DOUD,2,3 ANTHONY M...truck-mounted ultra-low volume applications of pyriproxyfen against Aedes aegypti larvae in artificial water containers and wild adult Ae. albopictus...larval control, Aedes aegypti, Aedes albopictus INTRODUCTION Aedes albopictus (Skuse) (Asian tiger mosquito) and Ae. aegypti (L.) (yellow fever

  14. A "two-objective, one-area" procedure in absorption microphotometry and its application using an inverted microscope.

    Science.gov (United States)

    Chaubal, K A

    1988-08-01

    A 'two-objective, one-area' method and related equations are suggested to measure absorbance of microscopic stained objects. In such work, the measuring field invariably includes an image of the object and some clear area surrounding the image. The total intensity in the two areas is measured photometrically, using two different objectives, and substituted in the equation for absorbance. The equation is independent of the term representing intensity from the clear area and hence the error in the measurement of absorbance is reduced. The limitations of the 'two-objective, one-area' method are discussed and its pragmatic operation described with an experimental setup involving an inverted microscope. The method permits measurement of intensity in a part of a stained cell while the rest of the cell remains in the field of view. The method is applied to measure absorbance in Giemsa stained ascites cells and Feulgen stained liver and Human Amnion cells.

  15. Geostationary secular dynamics revisited: application to high area-to-mass ratio objects

    Science.gov (United States)

    Gachet, Fabien; Celletti, Alessandra; Pucacco, Giuseppe; Efthymiopoulos, Christos

    2017-06-01

    The long-term dynamics of the geostationary Earth orbits (GEO) is revisited through the application of canonical perturbation theory. We consider a Hamiltonian model accounting for all major perturbations: geopotential at order and degree two, lunisolar perturbations with a realistic model for the Sun and Moon orbits, and solar radiation pressure. The long-term dynamics of the GEO region has been studied both numerically and analytically, in view of the relevance of such studies to the issue of space debris or to the disposal of GEO satellites. Past studies focused on the orbital evolution of objects around a nominal solution, hereafter called the forced equilibrium solution, which shows a particularly strong dependence on the area-to-mass ratio. Here, we (i) give theoretical estimates for the long-term behavior of such orbits, and (ii) we examine the nature of the forced equilibrium itself. In the lowest approximation, the forced equilibrium implies motion with a constant non-zero average `forced eccentricity', as well as a constant non-zero average inclination, otherwise known in satellite dynamics as the inclination of the invariant `Laplace plane'. Using a higher order normal form, we demonstrate that this equilibrium actually represents not a point in phase space, but a trajectory taking place on a lower-dimensional torus. We give analytical expressions for this special trajectory, and we compare our results to those found by numerical orbit propagation. We finally discuss the use of proper elements, i.e., approximate integrals of motion for the GEO orbits.

  16. Exploring diversity in ensemble classification: Applications in large area land cover mapping

    Science.gov (United States)

    Mellor, Andrew; Boukir, Samia

    2017-07-01

    Ensemble classifiers, such as random forests, are now commonly applied in the field of remote sensing, and have been shown to perform better than single classifier systems, resulting in reduced generalisation error. Diversity across the members of ensemble classifiers is known to have a strong influence on classification performance - whereby classifier errors are uncorrelated and more uniformly distributed across ensemble members. The relationship between ensemble diversity and classification performance has not yet been fully explored in the fields of information science and machine learning and has never been examined in the field of remote sensing. This study is a novel exploration of ensemble diversity and its link to classification performance, applied to a multi-class canopy cover classification problem using random forests and multisource remote sensing and ancillary GIS data, across seven million hectares of diverse dry-sclerophyll dominated public forests in Victoria Australia. A particular emphasis is placed on analysing the relationship between ensemble diversity and ensemble margin - two key concepts in ensemble learning. The main novelty of our work is on boosting diversity by emphasizing the contribution of lower margin instances used in the learning process. Exploring the influence of tree pruning on diversity is also a new empirical analysis that contributes to a better understanding of ensemble performance. Results reveal insights into the trade-off between ensemble classification accuracy and diversity, and through the ensemble margin, demonstrate how inducing diversity by targeting lower margin training samples is a means of achieving better classifier performance for more difficult or rarer classes and reducing information redundancy in classification problems. Our findings inform strategies for collecting training data and designing and parameterising ensemble classifiers, such as random forests. This is particularly important in large area

  17. Application of diagnosis and monitoring area contaminated by petroleum derivatives; Aplicacao da tecnica de caminhamento eletrico em area contaminada por derivados de petroleo

    Energy Technology Data Exchange (ETDEWEB)

    Moreira, Cesar Augusto [Pos-graduacao em Geociencias em Meio Ambiente, IGCE - UNESP, Rio Claro, SP (Brazil)], E-mail: cesargeologia@yahoo.com.br; Dourado, Joao Carlos; Braga, Antonio Celso de Oliveira [Dept. de Geologia Aplicada, IGCE - UNESP, Rio Claro, SP (Brazil)], E-mails: jdourado@rc.unesp.br, acobraga@rc.unesp.br

    2006-07-15

    Geophysical methods are useful technic of geological investigation, thoroughly employed to diagnosis and monitoring contaminated areas, in conjunction with direct techniques of investigation such as chemical analyses. Among these, electric resistivity is more usually used in studies of contaminants in soil and groundwater, due to the high contrast of electric properties between the soil and the pollutant types frequently found, essentially constituted of composed organic and inorganic. Geophysical studies in impacted areas by petroleum products may be describe by anomalies of both low resistivity and high resistivities, confirmed as contaminant by chemical analyses. This apparent contradiction can reflect processes of degradation of the contaminants, directly associated with its residence time in the soil, through the generation of by-products that change the physical properties of the soil and groundwater, principally for the mineral dissolution by action of organic acids and by formation of minerals of oxides and hydroxides minerals. Natural attenuation defines a series of physical, chemical and biological processes that allow the degradation, dispersion and dilution of contaminants in a natural form, in other words, free from human intervention. This paper presents the application of electrical profiling technique in a contaminated industrial area for benzene, toluene, xylene, 1,2 dichloroethene and inorganic salts and it discusses the physical alterations of the contaminated soil through the obtained results, under the optics of the Natural Attenuation in course in the area of study. (author)

  18. Study Of Isotopic Technical Application To Estimate Origin Of Nitrogen Composition Of Groundwater In Hanoi Area

    International Nuclear Information System (INIS)

    Trinh Van Giap; Dinh Bich Lieu; Dang Anh Minh; Vo Thi Anh; Bui Dac Dung; Nguyen Thi Hong Thinh; Nguyen Manh Hung; Nguyen Van Hoan; Nguyen Van Hai

    2007-01-01

    Groundwater in Hanoi area as well as some other areas in Bac-Bo Delta is being contaminated by heavy metals and nitrogen compounds, especially arsenic and ammonium. The origin of nitrogen compounds in groundwater in Hanoi area is estimated in order to exploit and manage sustainable groundwater served for production and live. (author)

  19. Knowledge-Based Control Systems via Internet Part I. Applications in Biotechnology

    Directory of Open Access Journals (Sweden)

    Georgi Georgiev

    2005-04-01

    Full Text Available An extensive approach towards the dissemination of expert knowledge and coordination efforts to distributed points and seamless integration of control strategies applied to distributed yet identical systems is crucial to enhance overall efficiency and operational costs. Application of Knowledge-Based Control System via Internet will be very efficient especially in biotechnology, because many industrial bioprocesses, based on the same technological principles, are distributed in the whole world. Brewing industry oriented practical solutions illustrate this approach.

  20. Applications of energy-release-rate techniques to part-through cracks in experimental pressure vessels

    International Nuclear Information System (INIS)

    Bass, B.R.; Bryan, R.H.; Bryson, J.W.; Merkle, J.G.

    1982-01-01

    In nonlinear applications of computational fracture mechanics, energy release rate techniques are used increasingly for computing stress intensity parameters of crack configurations. Recently, deLorenzi used the virtual-crack-extension method to derive an analytical expression for the energy release rate that is better suited for three-dimensional calculations than the well-known J-integral. Certain studies of fracture phenomena, such as pressurized-thermal-shock of cracked structures, require that crack tip parameters be determined for combined thermal and mechanical loads. A method is proposed here that modifies the isothermal formulation of deLorenzi to account for thermal strains in cracked bodies. This combined thermo-mechanical formulation of the energy release rate is valid for general fracture, including nonplanar fracture, and applies to thermo-elastic as well as deformation plasticity material models. Two applications of the technique are described here. In the first, semi-elliptical surface cracks in an experimental test vessel are analyzed under elastic-plastic conditions using the finite element method. The second application is a thick-walled test vessel subjected to combined pressure and thermal shock loadings

  1. Parallel Algorithms and Software for Nuclear, Energy, and Environmental Applications Part I: Multiphysics Algorithms

    International Nuclear Information System (INIS)

    Gaston, Derek; Guo, Luanjing; Hansen, Glen; Huang, Hai; Johnson, Richard; Park, HyeongKae; Podgorney, Robert; Tonks, Michael; Williamson, Richard

    2012-01-01

    There is a growing trend within energy and environmental simulation to consider tightly coupled solutions to multiphysics problems. This can be seen in nuclear reactor analysis where analysts are interested in coupled flow, heat transfer and neutronics, and in nuclear fuel performance simulation where analysts are interested in thermomechanics with contact coupled to species transport and chemistry. In energy and environmental applications, energy extraction involves geomechanics, flow through porous media and fractured formations, adding heat transport for enhanced oil recovery and geothermal applications, and adding reactive transport in the case of applications modeling the underground flow of contaminants. These more ambitious simulations usually motivate some level of parallel computing. Many of the physics coupling efforts to date utilize simple code coupling or first-order operator splitting, often referred to as loose coupling. While these approaches can produce answers, they usually leave questions of accuracy and stability unanswered. Additionally, the different physics often reside on distinct meshes and data are coupled via simple interpolation, again leaving open questions of stability and accuracy.

  2. Research on passive solar energy application in Cyprus. Part 1. Meteorological characteristics of Cyprus

    Energy Technology Data Exchange (ETDEWEB)

    Ishihara, O; Savva, M [Kumamoto University, Kumamoto (Japan); Saito, I [Yatsushiro Institute of Technology, Kumamoto (Japan)

    1996-10-27

    For application of passive solar systems to houses in Cyprus, meteorological and geographical characteristics were studied. Solar energy is not yet in wide use in Cyprus. Meteorological subjects are also not yet clarified for application of passive solar systems to houses. Annual temperature difference is estimated to be nearly 10{degree}C between the lowland and highland, and a drop in temperature with altitude is 0.33-0.76{degree}C/100m. Sunshine duration is longer in summer in everywhere showing 10-13.2 hours in August, while it is shorter in winter showing 3.5-6 hours in January. It is shorter in highland than lowland all the year through. Solar radiation intensity is obviously lower in winter than summer. Relative humidity is considerably low in highland, and it is low during the daytime in summer in lowland. In general, the relative humidity remarkably increases in the night all the year through and the daytime in winter. As the survey result, meteorological conditions are more suitable in Cyprus than Tokyo and Kumamoto for application of solar systems to houses. 4 refs., 10 figs., 1 tab.

  3. THE APPLICATION OF A BPL INDEX IN THE POLISH PART OF THE VISTULA LAGOON

    Directory of Open Access Journals (Sweden)

    Monika Agnieszka Michałek

    2015-01-01

    Full Text Available This paper presents a biopollution assessment results with respect to macrozoobenthic non-indigenous species in the Polish part of the Vistula Lagoon. A biopollution level index (BPL was applied and evaluated based on the studies on macrozoobenthos conducted in 2010 and 2012 within the frame of several individual projects. Overall 15 macrozoobenthic species were identified, 5 of which were aquatic alien species: Marenzelleria neglecta, Rhitropanopeus harrissi, Potamopyrgus antipodarum, Dreissena polymorpha and Rangia cuneata. According to the applied criteria the Vistula Lagoon was moderately influenced by invasive species.

  4. Testing the methodology for site descriptive modelling. Application for the Laxemar area

    International Nuclear Information System (INIS)

    Andersson, Johan; Berglund, Johan; Follin, Sven; Hakami, Eva; Halvarson, Jan; Hermanson, Jan; Laaksoharju, Marcus; Rhen, Ingvar; Wahlgren, C.H.

    2002-08-01

    A special project has been conducted where the currently available data from the Laxemar area, which is part of the Simpevarp site, have been evaluated and interpreted into a Site Descriptive Model covering: geology, hydrogeology, hydrogeochemistry and rock mechanics. Description of the surface ecosystem has been omitted, since it was re-characterised in another, parallel, project. Furthermore, there has been no evaluation of transport properties. The project is primarily a methodology test. The lessons learnt will be implemented in the Site Descriptive Modelling during the coming site investigation. The intent of the project has been to explore whether available methodology for Site Descriptive Modelling based on surface and borehole data is adequate and to identify potential needs for development and improvement in the methodology. The project has developed, with limitations in scope, a Site Descriptive Model in local scale, corresponding to the situation after completion of the Initial Site Investigations for the Laxemar area (i.e. 'version 1.2' using the vocabulary of the general execution program for the site investigations). The Site Descriptive Model should be reasonable, but should not be regarded as a 'real' model. There are limitations both in input data and in the scope of the analysis. The measured (primary) data constitute a wide range of different measurement results including data from two deep core drilled boreholes. These data both need to be checked for consistency and to be interpreted into a format more amenable for three-dimensional modelling. Examples of such evaluations are estimation of surface geology, lineament interpretation, geological single hole interpretation, hydrogeological single hole interpretation and assessment of hydrogeochemical data. Furthermore, while cross discipline interpretation is encouraged there is also a need for transparency. This means that the evaluations first are made within each discipline and after this

  5. Retrieving Storm Electric Fields from Aircrfaft Field Mill Data: Part II: Applications

    Science.gov (United States)

    Koshak, William; Mach, D. M.; Christian H. J.; Stewart, M. F.; Bateman M. G.

    2006-01-01

    The Lagrange multiplier theory developed in Part I of this study is applied to complete a relative calibration of a Citation aircraft that is instrumented with six field mill sensors. When side constraints related to average fields are used, the Lagrange multiplier method performs well in computer simulations. For mill measurement errors of 1 V m(sup -1) and a 5 V m(sup -1) error in the mean fair-weather field function, the 3D storm electric field is retrieved to within an error of about 12%. A side constraint that involves estimating the detailed structure of the fair-weather field was also tested using computer simulations. For mill measurement errors of 1 V m(sup -l), the method retrieves the 3D storm field to within an error of about 8% if the fair-weather field estimate is typically within 1 V m(sup -1) of the true fair-weather field. Using this type of side constraint and data from fair-weather field maneuvers taken on 29 June 2001, the Citation aircraft was calibrated. Absolute calibration was completed using the pitch down method developed in Part I, and conventional analyses. The resulting calibration matrices were then used to retrieve storm electric fields during a Citation flight on 2 June 2001. The storm field results are encouraging and agree favorably in many respects with results derived from earlier (iterative) techniques of calibration.

  6. Epitaxial crystal growth by sputter deposition: Applications to semiconductors. Part 2

    International Nuclear Information System (INIS)

    Greene, J.E.

    1984-01-01

    The understanding of the physics of ion-surface interactions has progressed sufficiently to allow sputter depositinn to be used as a crystal growth technique for depositing a wide variety of single crystal elemental, compound, alloy, and superlattice semiconductors. In many cases, films with essentially bulk values of carrier concentrations and mobilities have been obtained. The controlled use of low energy particle bombardment of the growing film during sputter deposition has been shown to affect all stages of crystal growth ranging from adatom mobilities and nucleation kinetics to elemental incorporation probabilities. Such effects provide inherent advantages for sputter deposition over other vapor phase techniques for the low temperature growth of compound and alloy semiconductors and are essential in allowing the growth of new and unique single crystal metastable semiconductors. Part 1 of this review includes sections on experimental techniques, the physics of ion-surface interactions, and ion bombardment effects on film nucleation and growth, while Part 2 presents a discussion of recent results in the growth of elemental, III-V, II-VI, IV-VI, metastable, and other compound semiconductors

  7. Qualitative Research in Emergency Care Part I: Research Principles and Common Applications.

    Science.gov (United States)

    Choo, Esther K; Garro, Aris C; Ranney, Megan L; Meisel, Zachary F; Morrow Guthrie, Kate

    2015-09-01

    Qualitative methods are increasingly being used in emergency care research. Rigorous qualitative methods can play a critical role in advancing the emergency care research agenda by allowing investigators to generate hypotheses, gain an in-depth understanding of health problems or specific populations, create expert consensus, and develop new intervention and dissemination strategies. This article, Part I of a two-article series, provides an introduction to general principles of applied qualitative health research and examples of its common use in emergency care research, describing study designs and data collection methods most relevant to our field, including observation, individual interviews, and focus groups. In Part II of this series, we will outline the specific steps necessary to conduct a valid and reliable qualitative research project, with a focus on interview-based studies. These elements include building the research team, preparing data collection guides, defining and obtaining an adequate sample, collecting and organizing qualitative data, and coding and analyzing the data. We also discuss potential ethical considerations unique to qualitative research as it relates to emergency care research. © 2015 by the Society for Academic Emergency Medicine.

  8. Application effect of TEM sounding survey on prospecting and target area selection of sandstone-type uranium deposits

    International Nuclear Information System (INIS)

    He Jianguo; Liang Shanming; Zhao Cuiping

    2006-01-01

    Based on the results of transient electromagnetic (TEM) sounding survey during recent years regional geological reconnaissance with drilling (1:250000), the application effect of TEM sounding survey during regional reconnaissance is summarized in this paper. It is suggested that the data of TEM sounding are useful in judging hydrodynamic conditions of groundwater and determining favorable areas for uranium ore-formation; TEM sounding in large areas may be proper for prospecting in gobi-desert areas and be beneficial for regional reconnaissance and target area selection, and may reduce the target area and provide basis for further drilling program. It is of popularized significance in the prospecting for sandstone-type uranium deposits. (authors)

  9. Operation and maintenance of the RA Reactor in 1985, Part 1, Annex A - Reactor applications

    International Nuclear Information System (INIS)

    Martinc, R.; Stanic, A.

    1985-01-01

    This document describes reactor operation from 1981 to 1985, including data about short term (shorter than 24 hours) and long term operation interruptions, as well as safety shutdown and reactor applications. During 1982, 1983 until July 1984 reactor was operated at 2 MW power according to the plan. Plan was not fulfilled in 1983 because deposits were noticed again, at the end of 1982, on the surface of fuel elements. Reactor was mainly used for neutron activation purposes and isotope production as source of neutrons for experimental purposes [sr

  10. 75 FR 78988 - Post-2014 Resource Pool-Loveland Area Projects, Allocation Procedures and Call for Applications

    Science.gov (United States)

    2010-12-17

    ... Administration (Western), a Federal power marketing agency of the Department of Energy (DOE), is publishing this... customers and for other appropriate purposes as determined by Western. These allocation procedures and call for applications, in conjunction with the Loveland Area Projects (LAP) Final Post-1989 Marketing Plan...

  11. Strategic Generation with Conjectured Transmission Price Responses in a Mixed Transmission Pricing System. Part 2. Application

    International Nuclear Information System (INIS)

    Wals, A.F.; Hobbs, B.F.; Rijkers, F.A.M.

    2004-05-01

    The conjectured transmission price response model presented in the first of this two-paper series considers the expectations of oligopolistic generators regarding how demands for transmission services affect the prices of those services. Here, the model is applied to northwest Europe, simulating a mixed transmission pricing system including export fees, a path-based auction system for between-country interfaces, and implicit congestion-based pricing of internal country constraints. The path-based system does not give credit for counterflows when calculating export capability. The application shows that this no-netting policy can exacerbate the economic inefficiencies caused by oligopolistic pricing by generators. The application also illustrates the effects of different generator conjectures regarding rival supply responses and transmission prices. If generators anticipate that their increased demand for transmission services will increase transmission prices, then competitive intensity diminishes and energy prices rise. In the example here, the effect of this anticipation is to double the price increase that results from oligopolistic (Cournot) competition among generators

  12. Application of reliability based design concepts to transmission line structure foundations. Part 2

    International Nuclear Information System (INIS)

    DiGioia, A.M. Jr.; Rojas-Gonzalez, L.F.

    1991-01-01

    The application of reliability based design (RBD) methods to transmission line structure foundations has developed somewhat more slowly than that for the other structural components in line systems. In a previous paper, a procedure was proposed for the design of transmission line structures foundations using a probability based load and resistance factor design (LRFD) format. This procedure involved the determination of a foundation strength factor, φ F , which was used as a multiplier of the calculated nominal design strength to estimate the five percent exclusion limit strength required in the calculated nominal design strength to estimate the five percent exclusion limit strength required in the LRFD equation. Statistical analyses of results from full-scale load tests were used to obtain φ F values applicable to various nominal design strength equations and for drilled shafts subjected to uplift loads. These results clearly illustrated the significant economic benefits of conducting more detailed subsurface investigations for the design of transmission line structure foundations. A design example was also presented. In this paper the proposed procedure is extended to laterally load drilled shafts

  13. A dynamic model of the marriage market-Part 2: simulation of marital states and application to empirical data.

    Science.gov (United States)

    Matthews, A P; Garenne, M L

    2013-09-01

    A dynamic, two-sex, age-structured marriage model is presented. Part 1 focused on first marriage only and described a marriage market matching algorithm. In Part 2 the model is extended to include divorce, widowing, and remarriage. The model produces a self-consistent set of marital states distributed by age and sex in a stable population by means of a gender-symmetric numerical method. The model is compared with empirical data for the case of Zambia. Furthermore, a dynamic marriage function for a changing population is demonstrated in simulations of three hypothetical scenarios of elevated mortality in young to middle adulthood. The marriage model has its primary application to simulation of HIV-AIDS epidemics in African countries. Copyright © 2013 Elsevier Inc. All rights reserved.

  14. Cogeneration from Poultry Industry Wastes -- Part I: Indirectly Fired Gas Turbine Application

    DEFF Research Database (Denmark)

    Peretto, A.; Bianchi, M.; Cherubini, F.

    2003-01-01

    The availability of wet biomass as waste from a agriculture and farms and the need to meet the environmental standards force to investigate all options in order to dispose this waste. The possible treatments usually strongly depend on the biomass characteristics, namely water content, density....... Different plant configurations have been considered in order to make use of the oil and of the meat and bone meal, which are the by-products of the chicken cooking process. In particular, the process plant can be integrated with an energy supply plant which can consist of a Indirectly Fired Gas Turbine....../production and of return of the investments (Part II). Keywords: biomass, cogeneration, Gas Turbine, IFGT...

  15. Resource Conservation and Recovery Act: Part B permit application. Volume 8, Revision 5

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-01-01

    This is the tenth Annual Site Environmental Report (ASER), documenting the progress of environmental programs at the U.S. Department of Energy (DOE) Waste Isolation Pilot Plant (WIPP). The most significant change affecting the WIPP facility in 1993 was the cancellation of the Test Phase. All activities pertaining to the Test Phase will now be conducted at the Idaho National Engineering laboratory. Even though the cancellation of the Test Phase was a significant change in work scope for the WIPP, there are still numerous environmental monitoring and reporting activities that must be performed as a routine part of daily operations. These activities, and the WIPP's ability to demonstrate compliance with both state and federal environmental compliance requirements, are documented in this report. This report is a compilation and summarization of environmental data collected at the WIPP site.

  16. Application of Geophysical Techniques for 3D Geohazard Mapping to Delineate Cavities and Potential Sinkholes in the Northern Part of Kuala Lumpur, Malaysia

    Directory of Open Access Journals (Sweden)

    Zeinab Bakhshipour

    2013-01-01

    Full Text Available This work describes the application of the electrical resistivity (ER method to delineating subsurface structures and cavities in Kuala Lumpur Limestone within the Batu Cave area of Selangor Darul Ehsan, Malaysia. In all, 17 ER profiles were measured by using a Wenner electrode configuration with 2 m spacing. The field survey was accompanied by laboratory work, which involves taking resistivity measurements of rock, soil, and water samples taken from the field to obtain the formation factor. The relationship between resistivity and the formation factor and porosity for all the samples was established. The porosity values were plotted and contoured. A 2-dimensional and 3-dimensional representation of the subsurface topography of the area was prepared through use of commercial computer software. The results show the presence of cavities and sinkholes in some parts of the study area. This work could help engineers and environmental managers by providing the information necessary to produce a sustainable management plan in order to prevent catastrophic collapses of structures and other related geohazard problems.

  17. State Waste Discharge Permit application for industrial discharge to land: 200 East Area W-252 streams

    International Nuclear Information System (INIS)

    1993-12-01

    This document constitutes the WAC 173-216 State Waste Discharge Permit application for six W-252 liquid effluent streams at the Hanford Site. Appendices B through H correspond to Section B through H in the permit application form. Within each appendix, sections correspond directly to the respective questions on the application form. The appendices include: Product or service information; Plant operational characteristics; Water consumption and waterloss; Wastewater information; Stormwater; Other information; and Site assessment

  18. Tectonic structure of Dokdo and adjacent area in the northeastern part of the Ulleung Basin of the East Sea using geophysical data

    Science.gov (United States)

    Kim, C.; Jeong, E.; Park, C.; Kwon, B.; Park, G.; Park, J.

    2008-12-01

    The northeastern part of the Ulleung Basin in the East Sea is composed of volcanic islands (Ulleungdo and Dokdo), seamounts (the Anyongbok Seamount, the Simheungtaek and the Isabu Tablemounts), and a deep pathway (Korea Gap). To understand tectonic structure and geophysical characteristics of Dokdo and adjacent area, We analysed geophysical potential data of KORDI(Korea Ocean Research and Development Institute), KIGAM(Korea Institute of Geoscience and Mineral Resources), and NORI(National Oceanographic Research Institute of Korea) around the Dokdo volcanic body except Ulleung Do because of empty data of its large island. Also, we eliminate the effect of water and sediments from the free-air gravity data to process 3D Moho depth inversion. 3D tectonic structure modelling of the study area was developed using Moho depth inversion result and sediment thickness data of NGDC(National Geophysical Data Center). The free-air gravity anomalies of the study area generally reflect bathymetric effects. Although the Dokdo seamounts have a similar topographic size, the decrease of free-air anomaly toward Isabu suggest that Isabu is oldest among the seaounts and have high degree of isostatic compensation. High Bouguer anomalies in the central part of the Ulleung Basin gradually decreases toward the Oki Bank. This feature suggests that the crust/mantle boundary is shallow in the central part of the Ulleung Basin. The complex magnetic pattern of Dokdo suggests that it might have erupted several times during its formation. The magnetic anomaly amplitude of Isabu is much smaller than that of Dokdo. Such low magnetic anomalies are attributed to a secondary change caused by the metamorphism or weathering of ferromagnetic minerals of the seamount during a long period of time after its formation. Analytic signals show high anomalous zones over volcanoes. Also, there are high analytic signal values in Korea Gap indicating magmatic intrusion in thick sediments. The power spectrum analysis

  19. Application of subinterval area median contrast filtering method in the recognizing of geochemical anomalies

    International Nuclear Information System (INIS)

    Zhao Ningbo; Fu Jin; Zhang Chuan; Liu Huan

    2012-01-01

    Traditional geochemical processing method sometimes maybe loses some weak anomalies related to mineralization, the authors can avoid the influence of geology background and can solve the problem of recognizing weak anomalies in the low-background and high-background area with the subinterval area median contrast filtering method. In an area of Jiangxi Province, several new anomalies are identified by this method and uranium mineralized prospects are found among them. (authors)

  20. Low temperature geothermal energy applications in the Albuquerque area. Final report, July 1, 1978-August 18, 1979

    Energy Technology Data Exchange (ETDEWEB)

    Kauffman, D.; Houghton, A.V.

    1979-01-01

    A study was made of the engineering and economic feasibility of hot water geothermal energy applications in the Albuquerque area. A generalized system design was developed and used as the basis for a series of economic case studies. Reservoir and user siting considerations were studied in light of the economic findings. Several specific potential applications were identified, including university campuses, industrial and commercial facilities, and residential buildings. Specific key technical problems relating to Albuquerque area applications were studied. These included environmental impacts, corrosion, scaling, heat losses in wells and transmission lines, heat exchangers, control systems, and system utilization and reliability. It is concluded that geothermal energy could be competitive with other energy sources for space heating and limited industrial use for moderate to large (10 million Btu/hr or more) energy using systems.

  1. Absorbed doses to the main parts of eyeball due to use 90Sr + 90Y ophthalmic applicator

    International Nuclear Information System (INIS)

    Chen Lishu

    1993-05-01

    The ophthalmic radiotherapy dosimetry and some affecting factors are introduced. The distributions of absorbed doses to the main parts of a fresh eyeball such as the cornea, sclera, lens and anterior chamber, during the radiotherapy by using a 90 Sr + 90 Y ophthalmic applicator are presented. An tissue-equivalent extrapolation ionization chamber was used in the dose measurement. The reasonable doses during ophthalmic radiotherapy for different depths have been obtained. Therefore, the absorbed dose to the lens, the most sensitive organ, can be given. These data are useful for radiation protection in ophthalmic radiotherapy

  2. The distribution of heavy metals and 137Cs in the central part of the Polish maritime zone (Baltic Sea) - the area selected for wind farm acquisition

    Science.gov (United States)

    Zaborska, Agata; Kosakowska, Alicja; Bełdowski, Jacek; Bełdowska, Magdalena; Szubska, Marta; Walkusz-Miotk, Jolanta; Żak, Adam; Ciechanowicz, Agnieszka; Wdowiak, Maciej

    2017-11-01

    Disturbances of the marine sediments that may be induced by offshore wind energy (OWE) construction and functioning may cause reintroduction of contaminants accumulated in the sea bottom over last century. It is thus very important to check in which offshore region of the Polish coast the littlest consequences of the OWE construction may be expected. The area of 9000 km2 in the central part of the Polish economic zone was selected for sediments sampling. In total, sediments from 46 stations were collected by gravity twin corer or geo-vibro corer. Heavy metal (Hg, Pb, Cd, As, Zn, Cu, Cr, Ni, Fe, Mn) concentrations were measured by AAS and ICP-MS while 137 Cs activity concentrations were measured by gamma spectrometer. Sediment accumulation rates were quantified by 210Pb geochronology at 7 stations to follow the history of contaminants accumulation. Study areas located between isobaths of 20 m and 40 m were characterized by the lowest concentration of heavy metals, often below natural environmental background (e.g. Pb = 6.7 - 11.4 μg·g-1, As = 0.3 - 8.4 μg·g-1). The largest contamination by heavy metals (e.g. Pb reached 86.1 μg·g-1 while As = 21.0 μg·g-1) was visible at the outer part of Bornholm Basin and in Słupsk Furrow, the deepest studied regions. Highest accumulation of heavy metals in this area is connected to large fraction of pelite sediments and large proportion of organic matter at those stations. It may be concluded that shallow sandy sediments of the Southern Baltic are unpolluted and appropriate for OWE construction. Deeper sea regions e.g Słupsk Furrow and Bornholm Basin may be regarded as moderately polluted and therefore not recommended for OWE acquisition.

  3. Simulation in paediatric urology and surgery, part 2: An overview of simulation modalities and their applications.

    Science.gov (United States)

    Nataraja, R M; Webb, N; Lopez, P J

    2018-02-02

    Surgical training has changed radically in the last few decades. The traditional Halstedian model of time-bound apprenticeship has been replaced with competency-based training. In our previous article, we presented an overview of learning theory relevant to clinical teaching; a summary for the busy paediatric surgeon and urologist. We introduced the concepts underpinning current changes in surgical education and training. In this next article, we give an overview of the various modalities of surgical simulation, the educational principles that underlie them, and potential applications in clinical practice. These modalities include; open surgical models and trainers, laparoscopic bench trainers, virtual reality trainers, simulated patients and role-play, hybrid simulation, scenario-based simulation, distributed simulation, virtual reality, and online simulation. Specific examples of technology that may be used for these modalities are included but this is not a comprehensive review of all available products. Copyright © 2018 Journal of Pediatric Urology Company. Published by Elsevier Ltd. All rights reserved.

  4. Practical application of silicon nitride ceramics for sliding parts of rotary engine

    International Nuclear Information System (INIS)

    Ueki, M.; Sato, Y.; Fukuda, K.

    1994-01-01

    Research on ceramic substitutes for the apex seals of the rotary engine have been carrying out. The aim of the substitution of apex seals, the development of high strength silicon nitride ceramics, and the application of the ceramic to the apex seals are described. The properties of silicon nitride ceramics used as apex seals in rotary engines for racing cars are presented. The apex seals were recovered from the rotary engines of racing cars in the 1989 and 1990 Le Mans 24-hour Grand Prix races, and the damage of the seals was investigated and analyzed in detail. One problem was the adhesion to the seals of the hardened chromium plating detached from the inside surface of the rotor housing. The adhesion of chromium caused the fine cracking and subsequent chipping of the apex seals. (orig.)

  5. A review of the semiconductor storage of television signals. Part 2: Applications 1975-1986

    Science.gov (United States)

    Riley, J. L.

    1987-08-01

    This is the second of two reports. In the first, the emerging semiconductor memory technology over the last two decades and some of the important operational characteristics of each ensuing generation of device are described together with the design philosophy for forming the devices into useful tools for the storage of television signals. The second of these reports describes some of the applications. These include improved television synchronizers, high quality PAL decoders, television noise reducers, film dirt concealment equipment and buffer storage for television picture processing equipment such as stills stores. The continuing developments in the technology promise still further increases of memory capacity and there is a proposal to build a mass semiconductor television picture sequence store, initially as a research tool.

  6. An integrated model for the assessment of global water resources – Part 2: Applications and assessments

    Directory of Open Access Journals (Sweden)

    N. Hanasaki

    2008-07-01

    Full Text Available To assess global water resources from the perspective of subannual variation in water availability and water use, an integrated water resources model was developed. In a companion report, we presented the global meteorological forcing input used to drive the model and six modules, namely, the land surface hydrology module, the river routing module, the crop growth module, the reservoir operation module, the environmental flow requirement module, and the anthropogenic withdrawal module. Here, we present the results of the model application and global water resources assessments. First, the timing and volume of simulated agriculture water use were examined because agricultural use composes approximately 85% of total consumptive water withdrawal in the world. The estimated crop calendar showed good agreement with earlier reports for wheat, maize, and rice in major countries of production. In major countries, the error in the planting date was ±1 mo, but there were some exceptional cases. The estimated irrigation water withdrawal also showed fair agreement with country statistics, but tended to be underestimated in countries in the Asian monsoon region. The results indicate the validity of the model and the input meteorological forcing because site-specific parameter tuning was not used in the series of simulations. Finally, global water resources were assessed on a subannual basis using a newly devised index. This index located water-stressed regions that were undetected in earlier studies. These regions, which are indicated by a gap in the subannual distribution of water availability and water use, include the Sahel, the Asian monsoon region, and southern Africa. The simulation results show that the reservoir operations of major reservoirs (>1 km3 and the allocation of environmental flow requirements can alter the population under high water stress by approximately −11% to +5% globally. The integrated model is applicable to

  7. HUMAN RELIABILITY ANALYSIS FOR COMPUTERIZED PROCEDURES, PART TWO: APPLICABILITY OF CURRENT METHODS

    Energy Technology Data Exchange (ETDEWEB)

    Ronald L. Boring; David I. Gertman

    2012-10-01

    Computerized procedures (CPs) are an emerging technology within nuclear power plant control rooms. While CPs have been implemented internationally in advanced control rooms, to date no U.S. nuclear power plant has implemented CPs in its main control room. Yet, CPs are a reality of new plant builds and are an area of considerable interest to existing plants, which see advantages in terms of easier records management by omitting the need for updating hardcopy procedures. The overall intent of this paper is to provide a characterization of human reliability analysis (HRA) issues for computerized procedures. It is beyond the scope of this document to propose a new HRA approach or to recommend specific methods or refinements to those methods. Rather, this paper serves as a review of current HRA as it may be used for the analysis and review of computerized procedures.

  8. Mayak Film Dosimeter Response Studies Part III: Application to Worker Dose Assessment

    International Nuclear Information System (INIS)

    Smetanin, Mikhail; Vasilenko, E. K.; Scherpelz, Robert I.

    2007-01-01

    This paper describes the methods used to convert individual dosimeter readings for workers to obtain estimates of worker doses received in Mayak facilities. Film dosimeters were used at Mayak PA for worker monitoring from 1948 until 1992. The method requires a determination of the relationship between the absorbed dose in film emulsion and the dose in air under calibration conditions, then an extension of this relationship to exposures in the actual radiation fields of the workplace. Corrections needed to account for actual workplace exposure conditions were determined by modeling with the Monte-Carlo radiation transport computer code MCNP. Correction factors were developed to convert from dosimeter reading to a realistic worker dose. The method was applied as a basis for individual dose reconstruction using film dosimeters in realistic photon spectra and geometries at Mayak PA work areas

  9. Geostatistical analysis of space variation in underground water various quality parameters in Kłodzko water intake area (SW part of Poland

    Directory of Open Access Journals (Sweden)

    Namysłowska-Wilczyńska Barbara

    2016-09-01

    Full Text Available This paper presents selected results of research connected with the development of a (3D geostatistical hydrogeochemical model of the Kłodzko Drainage Basin, dedicated to the spatial variation in the different quality parameters of underground water in the water intake area (SW part of Poland. The research covers the period 2011-2012. Spatial analyses of the variation in various quality parameters, i.e., contents of: iron, manganese, ammonium ion, nitrate ion, phosphate ion, total organic carbon, pH redox potential and temperature, were carried out on the basis of the chemical determinations of the quality parameters of underground water samples taken from the wells in the water intake area. Spatial variation in the parameters was analyzed on the basis of data obtained (November 2011 from tests of water taken from 14 existing wells with a depth ranging from 9.5 to 38.0 m b.g.l. The latest data (January 2012 were obtained (gained from 3 new piezometers, made in other locations in the relevant area. A depth of these piezometers amounts to 9-10 m.

  10. Heat pump applications in utility centres for large industrial areas in the Netherlands

    NARCIS (Netherlands)

    Wit, J.B. de

    1999-01-01

    A grand design for industrial waste heat utilisation has been composed in Rijnmond Industrial Area, the largest (petrochemical) industrial area in The Netherlands. In combination with local CHP plants, an HP, MP and LP steam exchange system has been developed. The primary energy savings of this

  11. Application of stereological methods to estimate post-mortem brain surface area using 3T MRI

    DEFF Research Database (Denmark)

    Furlong, Carolyn; García-Fiñana, Marta; Puddephat, Michael

    2013-01-01

    The Cavalieri and Vertical Sections methods of design based stereology were applied in combination with 3 tesla (i.e. 3T) Magnetic Resonance Imaging (MRI) to estimate cortical and subcortical volume, area of the pial surface, area of the grey-white matter boundary, and thickness of the cerebral...

  12. Neutron Tomography Application for Aircraft-parts and Root of Ginseng

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Yi Kyung; Lee, Seung Wook; Sim, Chul Mu; Jeon, Jin Su; Kim, Tae Ju [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    2005-07-01

    The neutron computerized tomography is considered to be a complementary tool to X-ray tomography in the sense that neutron interacts with atomic nucleus, otherwise X-ray interacts with an orbital electron of atom. The neutron tomography compared with X-ray tomography has a relatively short history. It is employed in stationary, as neutron sources are produced by the nuclear reactor. The full potential of the neutron tomography has yet to be investigated. Since, HANARO NRF was installed in 1995, the neutron radiography research group of KAERI has been developed the non-destructive testing methods by the computer tomography served for aerospace industry and agricultural industry. Concerning to NDT for aerospace, research was cooperated with Korean Air force. At the first stage, research was focused to find the micro-cracks based on internal passages inside aircraft parts and residual core of turbine blade. Concerning to NDT for agriculture, research was cooperated with the Agricultural Development and Technology Center. Research was focused to find the alive roots of Korean ginseng.

  13. Continuous integrity evaluation of corroded pipelines using complemented FEA results – Part II: Procedure application

    International Nuclear Information System (INIS)

    Varga, László; Fekete, Gábor

    2017-01-01

    The general objective of this paper is to execute the continuous integrity evaluation of corroded pipelines with the developed procedure has been presented in the Part I. This aim was performed with a large dataset of complemented finite element analysis (FEA) results and burst test values can be found in the References. The numerical investigations have been done with an assumed sample-case taking spherical and spheroid shaped characteristic and mobile defects into account. The most important achievements are the supplemented ductile failure analysis, the continuous suitability of the weak link, the strain-based design criteria and the continuous integrity assessment diagrams. - Highlights: • Finite Element Analysis (FEA) examinations are performed for selection of a sample-case to investigate corrosion defects. • Serial calculations are carried out to determine the continuous suitability of the corroded pipeline sections. • We investigate the shape and size effects of corrosion defects on load carrying capacities (LCCs) of defective pipelines. • Continuous integrity assessment diagram (CIAD) showing the decreasing competent LCCs in the operation time is introduced. • Verification of the proposed method is performed by comparing the FEA results with burst pressure values measured.

  14. Retrieving Storm Electric Fields From Aircraft Field Mill Data. Part 2; Applications

    Science.gov (United States)

    Koshak, W. J.; Mach, D. M.; Christian, H. J.; Stewart, M. F.; Bateman, M. G.

    2005-01-01

    The Lagrange multiplier theory and "pitch down method" developed in Part I of this study are applied to complete the calibration of a Citation aircraft that is instrumented with six field mill sensors. When side constraints related to average fields are used, the method performs well in computer simulations. For mill measurement errors of 1 V/m and a 5 V/m error in the mean fair weather field function, the 3-D storm electric field is retrieved to within an error of about 12%. A side constraint that involves estimating the detailed structure of the fair weather field was also tested using computer simulations. For mill measurement errors of 1 V/m, the method retrieves the 3-D storm field to within an error of about 8% if the fair weather field estimate is typically within 1 V/m of the true fair weather field. Using this side constraint and data from fair weather field maneuvers taken on 29 June 2001, the Citation aircraft was calibrated. The resulting calibration matrix was then used to retrieve storm electric fields during a Citation flight on 2 June 2001. The storm field results are encouraging and agree favorably with the results obtained from earlier calibration analyses that were based on iterative techniques.

  15. Partly Duffing Oscillator Stochastic Resonance Method and Its Application on Mechanical Fault Diagnosis

    Directory of Open Access Journals (Sweden)

    Jian Dang

    2016-01-01

    Full Text Available Due to the fact that the slight fault signals in early failure of mechanical system are usually submerged in heavy background noise, it is unfeasible to extract the weak fault feature via the traditional vibration analysis. Stochastic resonance (SR, as a method of utilizing noise to amplify weak signals in nonlinear dynamical systems, can detect weak signals overwhelmed in the noise. However, based on the analysis of the impact of noise intensity on SR effect, it is concluded that the detection results are dramatically limited by the noise intensity of measured signals, especially for incipient fault feature of mechanical system with poor working environment. Therefore, this paper proposes a partly Duffing oscillator SR method to extract the fault feature of mechanical system. In this method, to locate the appearance of weak fault feature and decrease noise intensity, the permutation entropy index is constructed to select the measured signals for the input of Duffing oscillator system. Then, according to the regulation of system parameters, a reasonable match between the selected signals and Duffing oscillator model is achieved to produce a SR phenomenon and realize the fault diagnosis of mechanical system. Experiment results demonstrate that the proposed method achieves a better effect on the fault diagnosis of mechanical system.

  16. A study on the applications of AI in finishing of additive manufacturing parts

    Science.gov (United States)

    Fathima Patham, K.

    2017-06-01

    Artificial intelligent and computer simulation are the technological powerful tools for solving complex problems in the manufacturing industries. Additive Manufacturing is one of the powerful manufacturing techniques that provide design flexibilities to the products. The products with complex shapes are directly manufactured without the need of any machining and tooling using Additive Manufacturing. However, the main drawback of the components produced using the Additive Manufacturing processes is the quality of the surfaces. This study aims to minimize the defects caused during Additive Manufacturing with the aid of Artificial Intelligence. The developed AI system has three layers, each layer is trying to eliminate or minimize the production errors. The first layer of the AI system optimizes the digitization of the 3D CAD model of the product and hence reduces the stair case errors. The second layer of the AI system optimizes the 3D printing machine parameters in order to eliminate the warping effect. The third layer of AI system helps to choose the surface finishing technique suitable for the printed component based on the Degree of Complexity of the product and the material. The efficiency of the developed AI system was examined on the functional parts such as gears.

  17. Guidelines for planning interventions against external exposure in industrial area after a nuclear accident. Pt. 1. A holistic approach of countermeasure application

    International Nuclear Information System (INIS)

    Eged, K.; Kis, Z.; Andersson, K.G.; Roed, J.; Varga, K.

    2003-01-01

    Following a large-scale release of radioactivity into the environment, different urban, industrial and rural environments may be contaminated for many years. Currently, there is limited systematic consideration of long-term management to ensure sustainability of areas contaminated by long-lived radionuclides. To sustain acceptable living and working conditions in such areas it is important to be able to construct robust, effective restoration strategies which address the many different types of environment, land use and ways of life. The overall objective of the STRATEGY project (directly addressing Key Action 2: Nuclear Fission - Off-site emergency management in the Fifth Framework Programme) is to establish a decision framework to enable the selection of robust and practicable remediation strategies for Member States, which enable the long-term sustainable management of contaminated areas. The special objectives of the work carried out by GSF - Radiation Protection Institute and presented in this report was to contribute to the different urban/industrial parts of the STRATEGY project. Countermeasures being different from the usual urban ones and largely applicable in industrial area are collected and evaluated. The industrial area is defined here as such an area where productive and/or commercial activity is carried out. A good example is a supermarket or a factory. In designing restoration strategies to ensure the long-term sustainability of large and varied contaminated areas, there is a requirement to adopt a more holistic approach rather than simply selecting cost-effective countermeasures. The potentially negative consequences of restoration must be fully considered. The implementation of a remediation strategy may lead to a reduced collective dose, but increased dose to those implementing the strategies. Countermeasures may themselves generate waste and the practical consideration of disposal options has to be addressed. There is also a requirement that the

  18. Progress in bioleaching: part B: applications of microbial processes by the minerals industries.

    Science.gov (United States)

    Brierley, Corale L; Brierley, James A

    2013-09-01

    This review presents developments and applications in bioleaching and mineral biooxidation since publication of a previous mini review in 2003 (Olson et al. Appl Microbiol Biotechnol 63:249-257, 2003). There have been discoveries of newly identified acidophilic microorganisms that have unique characteristics for effective bioleaching of sulfidic ores and concentrates. Progress has been made in understanding and developing bioleaching of copper from primary copper sulfide minerals, chalcopyrite, covellite, and enargite. These developments point to low oxidation-reduction potential in concert with thermophilic bacteria and archaea as a potential key to the leaching of these minerals. On the commercial front, heap bioleaching of nickel has been commissioned, and the mineral biooxidation pretreatment of sulfidic-refractory gold concentrates is increasingly used on a global scale to enhance precious metal recovery. New and larger stirred-tank reactors have been constructed since the 2003 review article. One biooxidation-heap process for pretreatment of sulfidic-refractory gold ores was also commercialized. A novel reductive approach to bioleaching nickel laterite minerals has been proposed.

  19. Nuclear Medicine imaging of infection and inflammation Part 3: Clinical applications

    International Nuclear Information System (INIS)

    Gnanasegaran, G.; Croasdale, J.; Buscombe, J.R.

    2005-01-01

    Prompt localization of infection sites is essential for initiating appropriate therapeutic measures. There have been major advances in the management of patients suffering from infective and/or inflammatory disorders as a result of introduction of newer drugs with high sensitivity and specificity. However diagnosis of infection / inflammation still remains a major clinical problem. Although the typical signs of infection and inflammation are useful in localizing the pathology at superficial sites, infection and inflammation of internal structures are often difficult to localize without the aid of imaging procedures. Radionuclide imaging is an important diagnostic tool for the evaluation of patho-physiological processes of infection and inflammation. A spectrum of radiopharmaceuticals and a number of imaging protocols have been used in clinical practice. However every method differs in its potential to gather information at the cellular and molecular level. This review addresses some of the applications of radionuclide infection imaging procedures in musculoskeletal system, lymphatic system, in immunocompromised patients and in patients suffering from fever of unknown origin. (author)

  20. Lecture notes on the safety aspects in the industrial applications of radiation sources - Part I

    International Nuclear Information System (INIS)

    The report comprises the notes of the lectures delivered on the safety aspects in industrial applications of radiation sources. The notes are presented in 9 chapters. Basic mathematics relevant to the topic and basic concepts of nuclear physics are introduced in chapters I and II respectively. Various aspects of interaction of radiation with matter and living cells are discussed in chapters III and IV respectively. The biological effects of ionizing radiations are described in chapter V. Various commonly used units of measurement of radiation and radioactivity are defined and explained and measuring methods of radiation exposure are described in chapter VI. Chapter VII deals with the maximum permissible levels of radiation, both internal and external, for occupational workers as well as population. The same chapter also deals with ICRP recommendations in this connection. Commonly used radiation detectors and instruments with associated electronics are described in chapter VIII. Production of radioisotopes, radiation sources and labelled compounds is described in chapter IX. A table of useful radioisotopes is appended to this chapter. A bibliography in which references are arranged chapterwise is also given at the end. (M.G.B.)