WorldWideScience

Sample records for park manufacturing complex

  1. Manufacturing and Design Engineering Students St. Mary's Hospital, Phoenix Park.

    OpenAIRE

    Mitchell, Leah

    2012-01-01

    Poster with details of project to improve ease of movement for Kirton Stirling chairs in St. Mary's Hospital, Phoenix Park, Dublin. Third year students in the B Eng (Honours) Manufacturing and Design Engineering course at Bolton St. completed a project in conjunction with St. Mary‟s Hospital, Phoenix Park. The staff in St Mary‟s were experiencing difficulty in moving the Kirton Stirling chairs (pictured above). These chairs are used to transport elderly patients from one location to another. ...

  2. Modeling OPC complexity for design for manufacturability

    Science.gov (United States)

    Gupta, Puneet; Kahng, Andrew B.; Muddu, Swamy; Nakagawa, Sam; Park, Chul-Hong

    2005-11-01

    Increasing design complexity in sub-90nm designs results in increased mask complexity and cost. Resolution enhancement techniques (RET) such as assist feature addition, phase shifting (attenuated PSM) and aggressive optical proximity correction (OPC) help in preserving feature fidelity in silicon but increase mask complexity and cost. Data volume increase with rise in mask complexity is becoming prohibitive for manufacturing. Mask cost is determined by mask write time and mask inspection time, which are directly related to the complexity of features printed on the mask. Aggressive RET increase complexity by adding assist features and by modifying existing features. Passing design intent to OPC has been identified as a solution for reducing mask complexity and cost in several recent works. The goal of design-aware OPC is to relax OPC tolerances of layout features to minimize mask cost, without sacrificing parametric yield. To convey optimal OPC tolerances for manufacturing, design optimization should drive OPC tolerance optimization using models of mask cost for devices and wires. Design optimization should be aware of impact of OPC correction levels on mask cost and performance of the design. This work introduces mask cost characterization (MCC) that quantifies OPC complexity, measured in terms of fracture count of the mask, for different OPC tolerances. MCC with different OPC tolerances is a critical step in linking design and manufacturing. In this paper, we present a MCC methodology that provides models of fracture count of standard cells and wire patterns for use in design optimization. MCC cannot be performed by designers as they do not have access to foundry OPC recipes and RET tools. To build a fracture count model, we perform OPC and fracturing on a limited set of standard cells and wire configurations with all tolerance combinations. Separately, we identify the characteristics of the layout that impact fracture count. Based on the fracture count (FC) data

  3. Additive Manufacturing of Composites and Complex Materials

    Science.gov (United States)

    Spowart, Jonathan E.; Gupta, Nikhil; Lehmhus, Dirk

    2018-03-01

    Advanced composite materials form an important class of high-performance industrial materials used in weight-sensitive applications such as aerospace structures, automotive structures and sports equipment. In many of these applications, parts are made in small production runs, are highly customized and involve long process development times. Developments in additive manufacturing (AM) methods have helped in overcoming many of these limitations. The special topic of Additive Manufacturing of Composites and Complex Materials captures the state of the art in this area by collecting nine papers that present much novel advancement in this field. The studies under this topic show advancement in the area of AM of carbon fiber and graphene-reinforced composites with high thermal and electrical conductivities, development of new hollow glass particle-filled syntactic foam filaments for printing lightweight structures and integration of sensors or actuators during AM of metallic parts. Some of the studies are focused on process optimization or modification to increase the manufacturing speed or tuning manufacturing techniques to enable AM of new materials.

  4. PARKS OF RECREATIONAL COMPLEXES OF SUDAK CITY

    Directory of Open Access Journals (Sweden)

    Irina L. Potapenko

    2017-01-01

    Full Text Available Aim. Development of optimal paths of landscaping recreational complexes South-Eastern Crimea (Sudak for example, taking into account climatic, geographical and historical characteristics of the region. Material. Green plantings of recreational complexes have been surveyed in 2015–2016: the sanatorium "Sudak" of the Ministry of defense of the Russian Federation, the area is 26 ha; the pension "Crimean spring", an area is 10 ha; the pension "Zvezdniy", an area is 3 ha; the sanatorium "Sokol", an area is 3 ha; the Tourist and recreational complex "Sudak", an area is 17 ha. Results. Dendroflora of Sudak recreational facilities includes 151 species belonging to 90 genera and 47 families. The most represented species in the following families: Rosaceae – 27 (17,9%, Oleaceae – 12 (7,9%, Pinaceae – 12 (7,9%, Cupressaceae – 10 (6,7%, Fabaceae – 7 (4,6%. The greatest form variety is possessed by representatives of the family Cupressaceae (8, or 33,0%, the pyramidal form of cypress evergreen (Cupressus sempervirens `Pyramidalis` dominates among them. An assortment of ornamental trees and shrubs in the studied sites are quite diverse – 175 species and forms. Deciduous trees and shrubs prevail here – 60 (34,3% and 37 (21,1% species and forms respectively. There are 37 (21,1% species and forms of coniferous trees and shrubs. There are 24 (13,7% types and forms of evergreen foliage plants: shrubs – 18 (10,3%, trees – 4 (2,3%, lianas – 2 (1,1%. Main conclusions. The source of introductory material for the green construction of South-Eastern Crimea should be the representatives of families Cupressaceae, Pinaceae, Rosaceae, Oleaceae, Fabaceae those are the most adapted to the soil and climatic conditions of the region. Increasing the diversity of ornamental trees and shrubs should be achieved through the use of coniferous and evergreen plants. To create picturesque groups of plants with different emotional conten increasing the number of

  5. Smart manufacturing of complex shaped pipe components

    Science.gov (United States)

    Salchak, Y. A.; Kotelnikov, A. A.; Sednev, D. A.; Borikov, V. N.

    2018-03-01

    Manufacturing industry is constantly improving. Nowadays the most relevant trend is widespread automation and optimization of the production process. This paper represents a novel approach for smart manufacturing of steel pipe valves. The system includes two main parts: mechanical treatment and quality assurance units. Mechanical treatment is performed by application of the milling machine with implementation of computerized numerical control, whilst the quality assurance unit contains three testing modules for different tasks, such as X-ray testing, optical scanning and ultrasound testing modules. The advances of each of them provide reliable results that contain information about any failures of the technological process, any deviations of geometrical parameters of the valves. The system also allows detecting defects on the surface or in the inner structure of the component.

  6. Integration and test plans for complex manufacturing systems

    NARCIS (Netherlands)

    Boumen, R.

    2007-01-01

    The integration and test phases that are part of the development and manufacturing of complex manufacturing systems are costly and time consuming. As time-to-market is becoming increasingly important, it is crucial to keep these phases as short as possible, whilemaintaining system quality. This is

  7. The complexity and cost of vaccine manufacturing - An overview.

    Science.gov (United States)

    Plotkin, Stanley; Robinson, James M; Cunningham, Gerard; Iqbal, Robyn; Larsen, Shannon

    2017-07-24

    As companies, countries, and governments consider investments in vaccine production for routine immunization and outbreak response, understanding the complexity and cost drivers associated with vaccine production will help to inform business decisions. Leading multinational corporations have good understanding of the complex manufacturing processes, high technological and R&D barriers to entry, and the costs associated with vaccine production. However, decision makers in developing countries, donors and investors may not be aware of the factors that continue to limit the number of new manufacturers and have caused attrition and consolidation among existing manufacturers. This paper describes the processes and cost drivers in acquiring and maintaining licensure of childhood vaccines. In addition, when export is the goal, we describe the requirements to supply those vaccines at affordable prices to low-resource markets, including the process of World Health Organization (WHO) prequalification and supporting policy recommendation. By providing a generalized and consolidated view of these requirements we seek to build awareness in the global community of the benefits and costs associated with vaccine manufacturing and the challenges associated with maintaining consistent supply. We show that while vaccine manufacture may prima facie seem an economic growth opportunity, the complexity and high fixed costs of vaccine manufacturing limit potential profit. Further, for most lower and middle income countries a large majority of the equipment, personnel and consumables will need to be imported for years, further limiting benefits to the local economy. Copyright © 2017 The Authors. Published by Elsevier Ltd.. All rights reserved.

  8. Identification of complexity cost factors in manufacturing companies

    DEFF Research Database (Denmark)

    Myrodia, Anna; Hvam, Lars

    2015-01-01

    Complexity tends to be arguably the biggest challenge of manufacturing companies. As the demand from the customers increases in volume and diversity, the number of finished products and components increases as well. This increasing product complexity has a direct effect on the production processes....... This research focuses on the relation between product and process complexity. Complexity cost factors are identified and categorized under the industrial standard APQC for process classification. Then, this categorization is used as a tool for identification of complexity cost factors in seven companies...

  9. 3D Printer-Manufacturing of Complex Geometry Elements

    Science.gov (United States)

    Ciubară, A.; Burlea, Ș L.; Axinte, M.; Cimpoeșu, R.; Chicet, D. L.; Manole, V.; Burlea, G.; Cimpoeșu, N.

    2018-06-01

    In the last 5-10 years the process of 3D printing has an incredible advanced in all the fields with a tremendous number of applications. Plastic materials exhibit highly beneficial mechanical properties while delivering complex designs impossible to achieve using conventional manufacturing. In this article the printing process (filling degree, time, complications and details finesse) of few plastic elements with complicated geometry and fine details was analyzed and comment. 3D printing offers many of the thermoplastics and industrial materials found in conventional manufacturing. The advantages and disadvantages of 3D printing for plastic parts are discussed. Time of production for an element with complex geometry, from the design to final cut, was evaluated.

  10. Novel Complexity Indicator of Manufacturing Process Chains and Its Relations to Indirect Complexity Indicators

    Directory of Open Access Journals (Sweden)

    Vladimir Modrak

    2017-01-01

    Full Text Available Manufacturing systems can be considered as a network of machines/workstations, where parts are produced in flow shop or job shop environment, respectively. Such network of machines/workstations can be depicted as a graph, with machines as nodes and material flow between the nodes as links. The aim of this paper is to use sequences of operations and machine network to measure static complexity of manufacturing processes. In this order existing approaches to measure the static complexity of manufacturing systems are analyzed and subsequently compared. For this purpose, analyzed competitive complexity indicators were tested on two different manufacturing layout examples. A subsequent analysis showed relevant potential of the proposed method.

  11. A new large-scale manufacturing platform for complex biopharmaceuticals.

    Science.gov (United States)

    Vogel, Jens H; Nguyen, Huong; Giovannini, Roberto; Ignowski, Jolene; Garger, Steve; Salgotra, Anil; Tom, Jennifer

    2012-12-01

    Complex biopharmaceuticals, such as recombinant blood coagulation factors, are addressing critical medical needs and represent a growing multibillion-dollar market. For commercial manufacturing of such, sometimes inherently unstable, molecules it is important to minimize product residence time in non-ideal milieu in order to obtain acceptable yields and consistently high product quality. Continuous perfusion cell culture allows minimization of residence time in the bioreactor, but also brings unique challenges in product recovery, which requires innovative solutions. In order to maximize yield, process efficiency, facility and equipment utilization, we have developed, scaled-up and successfully implemented a new integrated manufacturing platform in commercial scale. This platform consists of a (semi-)continuous cell separation process based on a disposable flow path and integrated with the upstream perfusion operation, followed by membrane chromatography on large-scale adsorber capsules in rapid cycling mode. Implementation of the platform at commercial scale for a new product candidate led to a yield improvement of 40% compared to the conventional process technology, while product quality has been shown to be more consistently high. Over 1,000,000 L of cell culture harvest have been processed with 100% success rate to date, demonstrating the robustness of the new platform process in GMP manufacturing. While membrane chromatography is well established for polishing in flow-through mode, this is its first commercial-scale application for bind/elute chromatography in the biopharmaceutical industry and demonstrates its potential in particular for manufacturing of potent, low-dose biopharmaceuticals. Copyright © 2012 Wiley Periodicals, Inc.

  12. Environmental Screening for the Scedosporium apiospermum Species Complex in Public Parks in Bangkok, Thailand.

    Directory of Open Access Journals (Sweden)

    Natthanej Luplertlop

    Full Text Available The Scedosporium apiospermum species complex, comprising filamentous fungal species S. apiospermum sensu stricto, S. boydii, S. aurantiacum, S. dehoogii and S. minutispora, are important pathogens that cause a wide variety of infections. Although some species (S. boydii and S. apiospermum have been isolated from patients in Thailand, no environmental surveys of these fungi have been performed in Thailand or surrounding countries. In this study, we isolated and identified species of these fungi from 68 soil and 16 water samples randomly collected from 10 parks in Bangkok. After filtration and subsequent inoculation of samples on Scedo-Select III medium, colony morphological examinations and microscopic observations were performed. Scedosporium species were isolated from soil in 8 of the 10 parks, but were only detected in one water sample. Colony morphologies of isolates from 41 of 68 soil samples (60.29% and 1 of 15 water samples (6.67% were consistent with that of the S. apiospermum species complex. Each morphological type was selected for species identification based on DNA sequencing and phylogenetic analysis of the β-tubulin gene. Three species of the S. apiospermum species complex were identified: S. apiospermum (71 isolates, S. aurantiacum (6 isolates and S. dehoogii (5 isolates. In addition, 16 sequences could not be assigned to an exact Scedosporium species. According to our environmental survey, the S. apiospermum species complex is widespread in soil in Bangkok, Thailand.

  13. The impact of manufacturing complexity drivers on performance-a preliminary study

    Science.gov (United States)

    Huah Leang, Suh; Mahmood, Wan Hasrulnizzam Wan; Rahman, Muhamad Arfauz A.

    2018-03-01

    Manufacturing systems, in pursuit of cost, time and flexibility optimisation are becoming more and more complex, exhibiting a dynamic and nonlinear behaviour. Unpredictability is a distinct characteristic of such behaviour and effects production planning significantly. Therefore, this study was undertaken to investigate the priority level and current achievement of manufacturing performance in Malaysia’s manufacturing industry and the complexity drivers on manufacturing productivity performance. The results showed that Malaysia’s manufacturing industry prioritised product quality and they managed to achieve a good on time delivery performance. However, for other manufacturing performance, there was a difference where the current achievement of manufacturing performances in Malaysia’s manufacturing industry is slightly lower than the priority given to them. The strong correlation of significant value for priority status was observed between efficient production levelling (finished goods) and finish product management while the strong correlation of significant value for current achievement was minimised the number of workstation and factory transportation system. This indicates that complexity drivers have an impact towards manufacturing performance. Consequently, it is necessary to identify complexity drivers to achieve well manufacturing performance.

  14. Product variety, product complexity and manufacturing operational performance: A systematic literature review

    DEFF Research Database (Denmark)

    Trattner, Alexandria Lee; Hvam, Lars; Herbert-Hansen, Zaza Nadja Lee

    Manufacturing in the twenty-first century has been wrought with the struggle to satisfy the rising demand for greater product variety and more complex products while still maintaining efficient manufacturing operations. However, the literature lacks an overview of which operational performance...... measures are most affected by increased variety and complexity. This study presents a systematic literature review of the recent scholarly literature on variety, complexity and manufacturing operational performance (MOP). Results show that product variety has a consistently negative relationship with MOP...... across different time, cost, quality and flexibility measures while product complexity lacks evidence of strong relationships with MOP measures....

  15. Heterogeneous Parking Market Subject to Parking Rationing

    Directory of Open Access Journals (Sweden)

    Saeed Asadi Bagloee

    2015-01-01

    Full Text Available Different types of drivers and parking spaces delineate a heterogeneous parking market for which the literature has yet to provide a model applicable to the real world. The main obstacle is computational complexities of considering various parking restrictions along with traffic congestion on the road network. In this study, the heterogeneity aspects are considered within a Logit parking choice model. A mathematical programming problem was introduced to explicitly consider parking capacities and parking rationing constraints. The parking rationing is defined as any arrangement to reserve parking space for some specific demand such as parking permit, private parking, VIP parking, and different parking durations. Introduction of parking rationing in the presence of other constraints is a unique factor in this study which makes the model more realistic. The algorithm was tested on a central business district case study. The results prove that the algorithm is able to converge rapidly. Among the algorithm’s output are shadow prices of the parking capacity and parking rationing constraints. The shadow prices contain important information which is key to addressing a variety of parking issues, such as the location of parking shortages, identification of fair parking charges, viability of parking permits, and the size of reserved parking.

  16. Effects of groundwater pumping on the sustainability of a mountain wetland complex, Yosemite National Park, California

    Directory of Open Access Journals (Sweden)

    David J. Cooper

    2015-03-01

    Full Text Available Study Region: We analyzed the effects of groundwater pumping on a mountain wetland complex, Yosemite National Park, California, USA. Study Focus: Groundwater pumping from mountain meadows is common in many regions of the world. However, few quantitative analyses exist of the hydrologic or ecological effects of pumping. New Hydrological Insights for the Region: Daily hydraulic head and water table variations at sampling locations within 100 m of the pumping well were strongly correlated with the timing and duration of pumping. The effect of pumping varied by distance from the pumping well, depth of the water table when the pumping started, and that water year's snow water equivalent (SWE. Pumping in years with below average SWE and/or early melting snow pack, resulted in a water table decline to the base of the fen peat body by mid summer. Pumping in years with higher SWE and later melting snowpack, resulted in much less water level drawdown from the same pumping schedule. Predictive modeling scenarios showed that, even in a dry water year like 2004, distinct increases in fen water table elevation can be achieved with reductions in pumping. A high water table during summers following low snowpack water years had a more significant influence on vegetation composition than depth of water table in wet years or peat thickness, highlighting the impact of water level drawdown on vegetation. Keywords: Fen, Groundwater pumping, Modeling, Mountain meadow, Water table, Wetlands

  17. Numerical simulation of complex part manufactured by selective laser melting process

    Science.gov (United States)

    Van Belle, Laurent

    2017-10-01

    Selective Laser Melting (SLM) process belonging to the family of the Additive Manufacturing (AM) technologies, enable to build parts layer by layer, from metallic powder and a CAD model. Physical phenomena that occur in the process have the same issues as conventional welding. Thermal gradients generate significant residual stresses and distortions in the parts. Moreover, the large and complex parts to manufacturing, accentuate the undesirable effects. Therefore, it is essential for manufacturers to offer a better understanding of the process and to ensure production reliability of parts with high added value. This paper focuses on the simulation of manufacturing turbine by SLM process in order to calculate residual stresses and distortions. Numerical results will be presented.

  18. Are Agile and Lean Manufacturing Systems Employing Sustainability, Complexity and Organizational Learning?

    Science.gov (United States)

    Flumerfelt, Shannon; Siriban-Manalang, Anna Bella; Kahlen, Franz-Josef

    2012-01-01

    Purpose: This paper aims to peruse theories and practices of agile and lean manufacturing systems to determine whether they employ sustainability, complexity and organizational learning. Design/methodology/approach: The critical review of the comparative operational similarities and difference of the two systems was conducted while the new views…

  19. New possibilities using additive manufacturing with materials that are difficult to process and with complex structures

    Science.gov (United States)

    Olsson, Anders; Hellsing, Maja S.; Rennie, Adrian R.

    2017-05-01

    Additive manufacturing (or 3D printing) opens the possibility of creating new designs and manufacturing objects with new materials rapidly and economically. Particularly for use with polymers and polymer composites, simple printers can make high quality products, and these can be produced easily in offices, schools and in workshops and laboratories. This technology has opened a route for many to test ideas or to make custom devices. It is possible to easily manufacture complex geometries that would be difficult or even impossible to create with traditional methods. Naturally this technology has attracted attention in many fields that include the production of medical devices and prostheses, mechanical engineering as well as basic sciences. Materials that are highly problematic to machine can be used. We illustrate process developments with an account of the production of printer parts to cope with polymer fillers that are hard and abrasive; new nozzles with ruby inserts designed for such materials are durable and can be used to print boron carbide composites. As with other materials, complex parts can be printed using boron carbide composites with fine structures, such as screw threads and labels to identify materials. General ideas about design for this new era of manufacturing customised parts are presented.

  20. New possibilities using additive manufacturing with materials that are difficult to process and with complex structures

    International Nuclear Information System (INIS)

    Olsson, Anders; Hellsing, Maja S; Rennie, Adrian R

    2017-01-01

    Additive manufacturing (or 3D printing) opens the possibility of creating new designs and manufacturing objects with new materials rapidly and economically. Particularly for use with polymers and polymer composites, simple printers can make high quality products, and these can be produced easily in offices, schools and in workshops and laboratories. This technology has opened a route for many to test ideas or to make custom devices. It is possible to easily manufacture complex geometries that would be difficult or even impossible to create with traditional methods. Naturally this technology has attracted attention in many fields that include the production of medical devices and prostheses, mechanical engineering as well as basic sciences. Materials that are highly problematic to machine can be used. We illustrate process developments with an account of the production of printer parts to cope with polymer fillers that are hard and abrasive; new nozzles with ruby inserts designed for such materials are durable and can be used to print boron carbide composites. As with other materials, complex parts can be printed using boron carbide composites with fine structures, such as screw threads and labels to identify materials. General ideas about design for this new era of manufacturing customised parts are presented. (invited comment)

  1. National Parks

    Data.gov (United States)

    Department of Transportation — National Park Service unit boundaries (NTAD). These park boundaries signify legislative boundary definitions and local park names have been consolidated according to...

  2. Replicative manufacturing of complex lighting optics by non-isothermal glass molding

    Science.gov (United States)

    Kreilkamp, Holger; Vu, Anh Tuan; Dambon, Olaf; Klocke, Fritz

    2016-09-01

    The advantages of LED lighting, especially its energy efficiency and the long service life have led to a wide distribution of LED technology in the world. However, in order to make fully use of the great potential that LED lighting offers, complex optics are required to distribute the emitted light from the LED efficiently. Nowadays, many applications use polymer optics which can be manufactured at low costs. However, due to ever increasing luminous power, polymer optics reach their technological limits. Due to its outstanding properties, especially its temperature resistance, resistance against UV radiation and its long term stability, glass is the alternative material of choice for the use in LED optics. This research is introducing a new replicative glass manufacturing approach, namely non-isothermal glass molding (NGM) which is able to manufacture complex lighting optics in high volumes at competitive prices. The integration of FEM simulation at the early stage of the process development is presented and helps to guarantee a fast development cycle. A coupled thermo-mechanical model is used to define the geometry of the glass preform as well as to define the mold surface geometry. Furthermore, simulation is used to predict main process outcomes, especially in terms of resulting form accuracy of the molded optics. Experiments conducted on a commercially available molding machine are presented to validate the developed simulation model. Finally, the influence of distinct parameters on important process outcomes like form accuracy, surface roughness, birefringence, etc. is discussed.

  3. Peary caribou distribution within the Bathurst Island Complex relative to the boundary proposed for Qausuittuq National Park, Nunavut

    Directory of Open Access Journals (Sweden)

    Kim G. Poole

    2015-12-01

    Full Text Available How caribou (Rangifer tarandus, including Peary caribou (R. t. pearyi, use their annual ranges varies with changes in abundance. While fidelity to some seasonal ranges is persistent, use of other areas changes. Consequently, understanding changes in seasonal distribution is useful for designing boundaries of protected areas for caribou conservation. A case in point is the proposed Qausuittuq (Northern Bathurst Island National Park for Bathurst Island and its satellite islands in the High Arctic of Canada. Since 1961, Peary caribou have been through three periods of high and low abundance. We examined caribou distribution and composition mapped during nine systematic aerial surveys (1961–2013, unsystematic helicopter surveys (1989–98, and limited radio-collaring from 1994–97 and 2003–06. While migration patterns changed and use of southern Bathurst Island decreased during lows in abundance, use of satellite islands, especially Cameron Island for winter range, persisted during both highs and lows in abundance. The northeast coast of Bathurst Island was used to a greater extent during the rut and during summer at low abundance. We suggest that Park boundaries which include Cameron Island and the northeast coast of Bathurst Island will be more effective in contributing to the persistence of Peary caribou on the Bathurst Island Complex.

  4. Highly Manufacturable Deep (Sub-Millimeter) Etching Enabled High Aspect Ratio Complex Geometry Lego-Like Silicon Electronics

    KAUST Repository

    Ghoneim, Mohamed T.; Hussain, Muhammad Mustafa

    2017-01-01

    A highly manufacturable deep reactive ion etching based process involving a hybrid soft/hard mask process technology shows high aspect ratio complex geometry Lego-like silicon electronics formation enabling free-form (physically flexible

  5. Complex Network Analysis for Characterizing Global Value Chains in Equipment Manufacturing

    Science.gov (United States)

    Meng, Bo; Cheng, Lihong

    2017-01-01

    The rise of global value chains (GVCs) characterized by the so-called “outsourcing”, “fragmentation production”, and “trade in tasks” has been considered one of the most important phenomena for the 21st century trade. GVCs also can play a decisive role in trade policy making. However, due to the increasing complexity and sophistication of international production networks, especially in the equipment manufacturing industry, conventional trade statistics and the corresponding trade indicators may give us a distorted picture of trade. This paper applies various network analysis tools to the new GVC accounting system proposed by Koopman et al. (2014) and Wang et al. (2013) in which gross exports can be decomposed into value-added terms through various routes along GVCs. This helps to divide the equipment manufacturing-related GVCs into some sub-networks with clear visualization. The empirical results of this paper significantly improve our understanding of the topology of equipment manufacturing-related GVCs as well as the interdependency of countries in these GVCs that is generally invisible from the traditional trade statistics. PMID:28081201

  6. Complex Network Analysis for Characterizing Global Value Chains in Equipment Manufacturing.

    Directory of Open Access Journals (Sweden)

    Hao Xiao

    Full Text Available The rise of global value chains (GVCs characterized by the so-called "outsourcing", "fragmentation production", and "trade in tasks" has been considered one of the most important phenomena for the 21st century trade. GVCs also can play a decisive role in trade policy making. However, due to the increasing complexity and sophistication of international production networks, especially in the equipment manufacturing industry, conventional trade statistics and the corresponding trade indicators may give us a distorted picture of trade. This paper applies various network analysis tools to the new GVC accounting system proposed by Koopman et al. (2014 and Wang et al. (2013 in which gross exports can be decomposed into value-added terms through various routes along GVCs. This helps to divide the equipment manufacturing-related GVCs into some sub-networks with clear visualization. The empirical results of this paper significantly improve our understanding of the topology of equipment manufacturing-related GVCs as well as the interdependency of countries in these GVCs that is generally invisible from the traditional trade statistics.

  7. Complex Network Analysis for Characterizing Global Value Chains in Equipment Manufacturing.

    Science.gov (United States)

    Xiao, Hao; Sun, Tianyang; Meng, Bo; Cheng, Lihong

    2017-01-01

    The rise of global value chains (GVCs) characterized by the so-called "outsourcing", "fragmentation production", and "trade in tasks" has been considered one of the most important phenomena for the 21st century trade. GVCs also can play a decisive role in trade policy making. However, due to the increasing complexity and sophistication of international production networks, especially in the equipment manufacturing industry, conventional trade statistics and the corresponding trade indicators may give us a distorted picture of trade. This paper applies various network analysis tools to the new GVC accounting system proposed by Koopman et al. (2014) and Wang et al. (2013) in which gross exports can be decomposed into value-added terms through various routes along GVCs. This helps to divide the equipment manufacturing-related GVCs into some sub-networks with clear visualization. The empirical results of this paper significantly improve our understanding of the topology of equipment manufacturing-related GVCs as well as the interdependency of countries in these GVCs that is generally invisible from the traditional trade statistics.

  8. Development in the manufacture of fuel assembly components at Nuclear Fuel Complex

    International Nuclear Information System (INIS)

    Saibaba, N.

    2012-01-01

    The integrity of the fuel bundle and pellet-clad mechanical and chemical interaction (PCMCI) is the major limiting factor in achieving high burn up in thermal as well as fast reactors. Zircaloy based fuel bundle used for Indian pressurized heavy water reactor consists of number of components such as fuel clad tube, end cap bearing pad and spacer pad. These tubular, bar and sheet components are manufactured at Nuclear Fuel Complex using a series of thermomechanical processes involving hot and cold working with intermediate heat treatment. This paper is aimed at bringing out recent advances in NFC in the manufacture of fuel assembly components. Zircaloy based double clad tube adopting co-extrusion route followed by cold pilgering was successfully produced for its potential usage for high burnup in advance thermal reactors such as Advanced Heavy Water Reactors, This paper also includes process modifications carried out in the manufacture of clad tube and end cap components based on in-depth metallurgical studies. A radial forging process was established for primary breakdown of arc melted ingot which allows for better soundness and homogeneous microstructure. Manufacturing route of bar components for end caps was suitably modified by adopting only barrel straightening to minimize the residual stress and thereby increasing the recovery appreciably. NFC also supplies clad tube for fast breeder reactors where limiting factor for burn up are void swelling and fuel-clad interaction. In view of this, advance claddings such as P/M based 9Cr - Oxide Dispersion strengthened (ODS) steel clad and Zirconium lined T91 (9Cr-1 Mo) steel double clad have been successfully produced. Zirconium lined T91 (9Cr-1 Mo) double clad tubes required was successfully produced by adopting the method of co-pilgering, as a candidate material for clad tubes of Fast Breeder Reactors. (author)

  9. Axiomatic design in large systems complex products, buildings and manufacturing systems

    CERN Document Server

    Suh, Nam

    2016-01-01

    This book provides a synthesis of recent developments in Axiomatic Design theory and its application in large complex systems. Introductory chapters provide concise tutorial materials for graduate students and new practitioners, presenting the fundamentals of Axiomatic Design and relating its key concepts to those of model-based systems engineering. A mathematical exposition of design axioms is also provided. The main body of the book, which represents a concentrated treatment of several applications, is divided into three parts covering work on: complex products; buildings; and manufacturing systems. The book shows how design work in these areas can benefit from the scientific and systematic underpinning provided by Axiomatic Design, and in so doing effectively combines the state of the art in design research with practice. All contributions were written by an international group of leading proponents of Axiomatic Design. The book concludes with a call to action motivating further research into the engineeri...

  10. Rapid prototyping of a complex model for the manufacture of plaster molds for slip casting ceramic

    Directory of Open Access Journals (Sweden)

    D. P. C. Velazco

    2014-12-01

    Full Text Available Computer assisted designing (CAD is well known for several decades and employed for ceramic manufacturing almost since the beginning, but usually employed in the first part of the projectual ideation processes, neither in the prototyping nor in the manufacturing stages. The rapid prototyping machines, also known as 3D printers, have the capacity to produce in a few hours real pieces using plastic materials of high resistance, with great precision and similarity with respect to the original, based on unprecedented digital models produced by means of modeling with specific design software or from the digitalization of existing parts using the so-called 3D scanners. The main objective of the work is to develop the methodology used in the entire process of building a part in ceramics from the interrelationship between traditional techniques and new technologies for the manufacture of prototypes. And to take advantage of the benefits that allow us this new reproduction technology. The experience was based on the generation of a complex piece, in digital format, which served as the model. A regular 15 cm icosahedron presented features complex enough not to advise the production of the model by means of the traditional techniques of ceramics (manual or mechanical. From this digital model, a plaster mold was made in the traditional way in order to slip cast clay based slurries, freely dried in air and fired and glazed in the traditional way. This experience has shown the working hypothesis and opens up the possibility of new lines of work to academic and technological levels that will be explored in the near future. This technology provides a wide range of options to address the formal aspect of a part to be performed for the field of design, architecture, industrial design, the traditional pottery, ceramic art, etc., which allow you to amplify the formal possibilities, save time and therefore costs when drafting the necessary and appropriate matrixes

  11. Simulating Resin Infusion through Textile Reinforcement Materials for the Manufacture of Complex Composite Structures

    Directory of Open Access Journals (Sweden)

    Robert S. Pierce

    2017-10-01

    Full Text Available Increasing demand for weight reduction and greater fuel efficiency continues to spur the use of composite materials in commercial aircraft structures. Subsequently, as composite aerostructures become larger and more complex, traditional autoclave manufacturing methods are becoming prohibitively expensive. This has prompted renewed interest in out-of-autoclave processing techniques in which resins are introduced into a reinforcing preform. However, the success of these resin infusion methods is highly dependent upon operator skill and experience, particularly in the development of new manufacturing strategies for complex parts. Process modeling, as a predictive computational tool, aims to address the issues of reliability and waste that result from traditional trial-and-error approaches. Basic modeling attempts, many of which are still used in industry, generally focus on simulating fluid flow through an isotropic porous reinforcement material. However, recent efforts are beginning to account for the multiscale and multidisciplinary complexity of woven materials, in simulations that can provide greater fidelity. In particular, new multi-physics process models are able to better predict the infusion behavior through textiles by considering the effect of fabric deformation on permeability and porosity properties within the reinforcing material. In addition to reviewing previous research related to process modeling and the current state of the art, this paper highlights the recent validation of a multi-physics process model against the experimental infusion of a complex double dome component. By accounting for deformation-dependent flow behavior, the multi-physics process model was able to predict realistic flow behavior, demonstrating considerable improvement over basic isotropic permeability models.

  12. ASPIE: A Framework for Active Sensing and Processing of Complex Events in the Internet of Manufacturing Things

    Directory of Open Access Journals (Sweden)

    Shaobo Li

    2018-03-01

    Full Text Available Rapid perception and processing of critical monitoring events are essential to ensure healthy operation of Internet of Manufacturing Things (IoMT-based manufacturing processes. In this paper, we proposed a framework (active sensing and processing architecture (ASPIE for active sensing and processing of critical events in IoMT-based manufacturing based on the characteristics of IoMT architecture as well as its perception model. A relation model of complex events in manufacturing processes, together with related operators and unified XML-based semantic definitions, are developed to effectively process the complex event big data. A template based processing method for complex events is further introduced to conduct complex event matching using the Apriori frequent item mining algorithm. To evaluate the proposed models and methods, we developed a software platform based on ASPIE for a local chili sauce manufacturing company, which demonstrated the feasibility and effectiveness of the proposed methods for active perception and processing of complex events in IoMT-based manufacturing.

  13. Methodology for designing and manufacturing complex biologically inspired soft robotic fluidic actuators: prosthetic hand case study.

    Science.gov (United States)

    Thompson-Bean, E; Das, R; McDaid, A

    2016-10-31

    We present a novel methodology for the design and manufacture of complex biologically inspired soft robotic fluidic actuators. The methodology is applied to the design and manufacture of a prosthetic for the hand. Real human hands are scanned to produce a 3D model of a finger, and pneumatic networks are implemented within it to produce a biomimetic bending motion. The finger is then partitioned into material sections, and a genetic algorithm based optimization, using finite element analysis, is employed to discover the optimal material for each section. This is based on two biomimetic performance criteria. Two sets of optimizations using two material sets are performed. Promising optimized material arrangements are fabricated using two techniques to validate the optimization routine, and the fabricated and simulated results are compared. We find that the optimization is successful in producing biomimetic soft robotic fingers and that fabrication of the fingers is possible. Limitations and paths for development are discussed. This methodology can be applied for other fluidic soft robotic devices.

  14. Design Process Control for Improved Surface Finish of Metal Additive Manufactured Parts of Complex Build Geometry

    Directory of Open Access Journals (Sweden)

    Mikdam Jamal

    2017-12-01

    Full Text Available Metal additive manufacturing (AM is increasingly used to create complex 3D components at near net shape. However, the surface finish (SF of the metal AM part is uneven, with surface roughness being variable over the facets of the design. Standard post-processing methods such as grinding and linishing often meet with major challenges in finishing parts of complex shape. This paper reports on research that demonstrated that mass finishing (MF processes are able to deliver high-quality surface finishes (Ra and Sa on AM-generated parts of a relatively complex geometry (both internal features and external facets under select conditions. Four processes were studied in this work: stream finishing, high-energy (HE centrifuge, drag finishing and disc finishing. Optimisation of the drag finishing process was then studied using a structured design of experiments (DOE. The effects of a range of finishing parameters were evaluated and optimal parameters and conditions were determined. The study established that the proposed method can be successfully applied in drag finishing to optimise the surface roughness in an industrial application and that it is an economical way of obtaining the maximum amount of information in a short period of time with a small number of tests. The study has also provided an important step in helping understand the requirements of MF to deliver AM-generated parts to a target quality finish and cycle time.

  15. An Assessment of Nondestructive Evaluation Capability for Complex Additive Manufacturing Aerospace Components

    Science.gov (United States)

    Walker, James; Beshears, Ron; Lambert, Dennis; Tilson, William

    2016-01-01

    The primary focus of this work is to investigate some of the fundamental relationships between processing, mechanical testing, materials characterization, and NDE for additively manufactured (AM) components using the powder bed fusion direct melt laser sintered process. The goal is to understand the criticality of defects unique to the AM process and then how conventional nondestructive evaluation methods as well as some of the more non-traditional methods such as computed tomography, are effected by the AM material. Specific defects including cracking, porosity and partially/unfused powder will be addressed. Besides line-of-site NDE, as appropriate these inspection capabilities will be put into the context of complex AM geometries where hidden features obscure, or inhibit traditional NDE methods.

  16. Pharmaceutical Additive Manufacturing: a Novel Tool for Complex and Personalized Drug Delivery Systems.

    Science.gov (United States)

    Zhang, Jiaxiang; Vo, Anh Q; Feng, Xin; Bandari, Suresh; Repka, Michael A

    2018-06-25

    Inter-individual variability is always an issue when treating patients of different races, genders, ages, pharmacogenetics, and pharmacokinetic characteristics. However, the development of novel dosage forms is limited by the huge investments required for production line modifications and dosages diversity. Additive manufacturing (AM) or 3D printing can be a novel alternative solution for the development of controlled release dosages because it can produce personalized or unique dosage forms and more complex drug-release profiles. The primary objective of this manuscript is to review the 3D printing processes that have been used in the pharmaceutical area, including their general aspects, materials, and the operation of each AM technique. Advantages and shortcomings of the technologies are discussed with respect to practice and practical applications. Thus, this review will provide an overview and discussion on advanced pharmaceutical AM technologies, which can be used to produce unique controlled drug delivery systems and personalized dosages for the future of personalized medicine.

  17. Manufacturing of ionic polymer-metal composites (IPMCs) that can actuate into complex curves

    Science.gov (United States)

    Stoimenov, Boyko L.; Rossiter, Jonathan M.; Mukai, Toshiharu

    2007-04-01

    Ionic polymer-metal composites (IPMC) are soft actuators with potential applications in the fields of medicine and biologically inspired robotics. Typically, an IPMC bends with approximately constant curvature when voltage is applied to it. More complex shapes were achieved in the past by pre-shaping the actuator or by segmentation and separate actuation of each segment. There are many applications for which fully independent control of each segment of the IPMC is not required and the use of external wiring is objectionable. In this paper we propose two key elements needed to create an IPMC, which can actuate into a complex curve. The first is a connection between adjacent segments, which enables opposite curvature. This can be achieved by reversing the polarity applied on each side of the IPMC, for example by a through-hole connection. The second key element is a variable curvature segment. The segment is designed to bend with any fraction of its full bending ability under given electrical input by changing the overlap of opposite charge electrodes. We demonstrated the usefulness of these key elements in two devices. One is a bi-stable buckled IPMC beam, also used as a building block in a linear actuator device. The other one is an IPMC, actuating into an S-shaped curve with gradually increasing curvature near the ends. The proposed method of manufacturing holds promise for a wide range of new applications of IPMCs, including applications in which IPMCs are used for sensing.

  18. Feature based Weld-Deposition for Additive Manufacturing of Complex Shapes

    Science.gov (United States)

    Panchagnula, Jayaprakash Sharma; Simhambhatla, Suryakumar

    2018-06-01

    Fabricating functional metal parts using Additive Manufacturing (AM) is a leading trend. However, realizing overhanging features has been a challenge due to the lack of support mechanism for metals. Powder-bed fusion techniques like, Selective Laser Sintering (SLS) employ easily-breakable-scaffolds made of the same material to realize the overhangs. However, the same approach is not extendible to deposition processes like laser or arc based direct energy deposition processes. Although it is possible to realize small overhangs by exploiting the inherent overhanging capability of the process or by blinding some small features like holes, the same cannot be extended for more complex geometries. The current work presents a novel approach for realizing complex overhanging features without the need of support structures. This is possible by using higher order kinematics and suitably aligning the overhang with the deposition direction. Feature based non-uniform slicing and non-uniform area-filling are some vital concepts required in realizing the same and are briefly discussed here. This method can be used to fabricate and/or repair fully dense and functional components for various engineering applications. Although this approach has been implemented for weld-deposition based system, the same can be extended to any other direct energy deposition processes also.

  19. Research on the Governance Mechanism of Aviation Complex Product Manufacturing Supply Chain Based on Dynamic Game Theory

    Directory of Open Access Journals (Sweden)

    Wang Nan

    2016-01-01

    Full Text Available In the manufacturing process of aeronautical complex products, for the following problems: develop long production cycle, a large number of ancillary products, a plurality of participating units, etc, and the status of the frequency of quality problems, using single-phase static game model in the case of asymmetric information, study on Supplier Quality insufficient investment, which resulting in opportunistic behaviour reasons. And using KMRW dynamic game model, we quantitative analysis the mechanism and crucial role of reputation mechanisms to ensure aeronautical complex product manufacturing supply chain and effective operation.

  20. Highly Manufacturable Deep (Sub-Millimeter) Etching Enabled High Aspect Ratio Complex Geometry Lego-Like Silicon Electronics.

    Science.gov (United States)

    Ghoneim, Mohamed Tarek; Hussain, Muhammad Mustafa

    2017-04-01

    A highly manufacturable deep reactive ion etching based process involving a hybrid soft/hard mask process technology shows high aspect ratio complex geometry Lego-like silicon electronics formation enabling free-form (physically flexible, stretchable, and reconfigurable) electronic systems. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  1. Highly Manufacturable Deep (Sub-Millimeter) Etching Enabled High Aspect Ratio Complex Geometry Lego-Like Silicon Electronics

    KAUST Repository

    Ghoneim, Mohamed T.

    2017-02-01

    A highly manufacturable deep reactive ion etching based process involving a hybrid soft/hard mask process technology shows high aspect ratio complex geometry Lego-like silicon electronics formation enabling free-form (physically flexible, stretchable, and reconfigurable) electronic systems.

  2. An Assessment of NDE Capability and Materials Characterization for Complex Additive Manufacturing Aerospace Components

    Data.gov (United States)

    National Aeronautics and Space Administration — This multi-center activity investigates the correlation between nondestructive evaluation (NDE), mechanical testing, microstructure, and additive manufacturing (AM)...

  3. Consistent manufacturing and quality control of a highly complex recombinant polyclonal antibody product for human therapeutic use.

    Science.gov (United States)

    Frandsen, Torben P; Naested, Henrik; Rasmussen, Søren K; Hauptig, Peter; Wiberg, Finn C; Rasmussen, Lone Kjaer; Jensen, Anne Marie Valentin; Persson, Pia; Wikén, Margareta; Engström, Anders; Jiang, Yun; Thorpe, Susan J; Förberg, Cecilia; Tolstrup, Anne B

    2011-09-01

    The beneficial effect of antibody therapy in human disease has become well established mainly for the treatment of cancer and immunological disorders. The inherent monospecificity of mAbs present limitations to mAb therapy which have become apparent notably in addressing complex entities like infectious agents or heterogenic endogenous targets. For such indications mixtures of antibodies comprising a combination of specificities would convey more potent biological effect which could translate into therapeutic efficacy. Recombinant polyclonal antibodies (rpAb) consisting of a defined number of well-characterized mAbs constitute a new class of target specific antibody therapy. We have developed a cost-efficient cell banking and single-batch manufacturing concept for the production of such products and demonstrate that a complex pAb composition, rozrolimupab, comprising 25 individual antibodies can be manufactured in a highly consistent manner in a scaled-up manufacturing process. We present a strategy for the release and characterization of antibody mixtures which constitute a complete series of chemistry, manufacturing, and control (CMC) analytical methods to address identity, purity, quantity, potency, and general characteristics. Finally we document selected quality attributes of rozrolimupab based on a battery of assays at the genetic-, protein-, and functional level and demonstrate that the manufactured rozrolimupab batches are highly pure and very uniform in their composition. Copyright © 2011 Wiley Periodicals, Inc.

  4. Lucas Heights technology park

    International Nuclear Information System (INIS)

    1987-01-01

    The proposed Lucas Heights Technology Park will pound together the applied research programs of Government, tertiary and industry sectors, aiming to foster technology transfer particularly to the high-technology manufacturing industry. A description of the site is given along with an outline of the envisaged development, existing facilities and expertise. ills

  5. Wireless based Smart Parking System using Zigbee

    OpenAIRE

    Hamzah Asyrani Bin Sulaiman; Mohd Fareez Bin Mohd Afif; Mohd Azlishah Bin Othman; Mohamad Harris Bin Misran; Maizatul Alice Binti Meor Said

    2013-01-01

    One of main issues of developing big parking space for shopping complexes, office complexes and other types of building that requires large parking space is to notify the visitors of occupied and nonoccupied parking space. Most of the visitors might spending up to 30 to 45 minutes just to find an empty parking space. In most recent technology, some parking lot system offered a system that could automatically count when the car entering the empty car space and blocking an infrared signal thus ...

  6. “Frontload” in complex project program management to aim for lifetime sustainability of offshore windmill parks

    DEFF Research Database (Denmark)

    Brink, Tove

    2015-01-01

    This paper reveals how project program management can aim for lifetime sustainability of offshore windmill parks through innovation. The research is based on a qualitative focus group interview with 11 enterprises and 6 individual semi-constructed interviews with 6 enterprises. Offshore windmill...

  7. Are TODs Over-Parked?

    OpenAIRE

    Cervero, Robert; Adkins, Arlie; Sullivan, Cathleen

    2009-01-01

    This study empirically investigates the proposition that TOD, and specifically housing near suburban rail stops, is “over-parked†in the U.S. This is done by comparing parking generation rates for 31 housing complexes near rail stops in the San Francisco Bay Area and Portland, Oregon with on-site parking supplies and with ITE parking generation rates. Factors that explain parking demand for transit-oriented housing are also investigated, both statistically and through case analyses. The re...

  8. Complex Comparison of Bavarian and Bohemian Forest National Parks from Geographical Perspective: Is there More Similarity or Difference?

    Directory of Open Access Journals (Sweden)

    Janík Tomáš

    2017-01-01

    Full Text Available This article focuses on comparison of the landscape of two National Parks (Bavarian and Bohemian Forest, which together create the largest area of wilderness in Central Europe. The article shows how different they are in social-economic and physical-geographical perspective. Social and economic conditions were introduced from perspective of path dependency and recent situation and its perception. Furthermore, we integrated social-economic and environmental perspective in the ecosystem services concept. Despite the lesser number tourists arriving to the Bavarian part of the area, perception is better than among mayors of municipalities on the Czech side. Different history, management and top-down and bottom-up approaches usage can explain these differences. The typologies of environmental conditions help us to distinguish differences between both National Parks. In the Bavarian Forest we can find more equal share of forests (coniferous, broad-leaved, mixed and surprisingly, thanks to large unmanaged part bigger relative share of regenerating forest landscapes than in the Bohemian Forest. Physical-geographical typology distinguishes five classes. Relative distribution of the classes is similar, but we can determine area of high plateau mainly on Czech side and on the other hand class of steeper terrain is located mainly in Bavarian Forest. Ecosystem services was presented by integrating landscape capacity analysis showing small differences between both National Parks in this case and no relation between land cover and attractiveness for tourism.

  9. Nuclear methods on service of mountain manufacture Navoi Mining-Metallurgical complex

    International Nuclear Information System (INIS)

    Kucherskiy, N.I.

    2004-01-01

    Full text: On a number of the major minerals, such as gold, uranium, copper, tungsten, potash salts, phosphorites, caolines, etc. Uzbekistan on the confirmed stocks and predicted resources occupies leading places among the states of the world. The basic deposits of gold and uranium are concentrated in Central-Kysylkum region, which is field of activity of Navoi mining-metallurgical combine. In industrial divisions of the combine, located in five areas of republic about 60000 persons are engaged. At all stages of manufacture of gold (since investigation) analytical maintenance has extremely important role. In NMMC radioanalytical methods are widely used, in particular, on mine 'Muruntau' the unique gamma-activation analysis laboratory has been constructed and entered into operation. For the period of operation of laboratory, i.e. since 1977, it is executed more than nine millions analyses of geological tests with extremely high expressness (about tens seconds). It is used x-ray-radiometric method for large-portion (by dumper) sortings and on lumpy separation of ores. With the help of high-sensitivity radiometric means of measurements it is possible to develop phosphorites for reception of phosphoric fertilizers. Nuclear-physical methods are applied to the decision of other problems. Thus, due to application of nuclear-physical methods of the operative control of technological processes of mining manufacture, quality management of ores, the account of quantity of products of extraction and their preliminary enrichment, the actual problem - increase in profitability of all mining manufacture NMMC is solved

  10. Advancing the manufacture of complex geometry GFRC for today's building envelopes

    Directory of Open Access Journals (Sweden)

    Thomas Henriksen

    2017-06-01

    With this research the current architectural knowledge base has been advanced in terms of complex geometry thin-walled GFRC for building envelopes. The identified solutions should allow building with complex geometries to be realised using thin-walled GFRC as the envelope cladding.

  11. Complexities of three dimensional part geometry. [Ambiguities in specification of pieces for manufacture

    Energy Technology Data Exchange (ETDEWEB)

    Stark, R.H.

    1977-05-01

    This report is a non-technical exposition on the ambiguities in conventional specification of the shape of a part to be manufactured and on various alternatives for representing its geometry for computer processing. It touches lightly on wire-frame and bounded surface representations and on the concept of design by volumes. It concludes that no existing computer-aided design system has yet shown its long-range superiority over he spectrum of parts and of uses to which its information base should be applicable. 9 figures.

  12. Park It!

    Science.gov (United States)

    Sartorius, Tara Cady

    2010-01-01

    Many artists visit national parks to draw, paint and take photographs of some of the most amazing scenery on earth. Raw nature is one of the greatest inspirations to an artist, and artists can be credited for helping inspire the government to create the National Park System. This article features Thomas Moran (1837-1926), one of the artists who…

  13. Parks & benefits

    DEFF Research Database (Denmark)

    Brandt, Jesper; Christensen, Andreas Aagaard; Holmes, Esbern

    2011-01-01

    conservation. Increasing visitor flows and cuts in staff resources has put focus on the management of visitor carrying capacities and their relation to landscape structure and zoning. At the same time park authorities face falling public appropriations and receding focus on their conservation functions...... compared to recreation and settlement. The constant priority of the balancing of nature protection and economic utilization gives rise to various experience with land use and visitor management relevant for sustainable development also outside the parks. In European nature parks the handling of visitor...... carrying capacities related to Natura2000-sites and their included habitat type areas is a priority theme for the sustainable management of nature parks. A comparative analysis of conditions and initiatives related to visitor carrying capacities in 8 nature parks in the Baltic region has been carried out...

  14. Supplemental Environmental Baseline Survey for Proposed Land Use Permit Modification for Expansion of the Dynamic Explosive Test Site (DETS) 9940 Main Complex Parking Lot

    Energy Technology Data Exchange (ETDEWEB)

    Peek, Dennis W. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2016-10-01

    The “subject property” is comprised of a parcel of land within the Kirtland Military Reservation, Bernalillo County, New Mexico, as shown on the map in Appendix B of this document. The land requirement for the parking lot addition to the 9940 Main Complex is approximately 2.7 acres. The scope of this Supplemental Environmental Baseline Survey (SEBS) is for the parking lot addition land transfer only. For details on the original 9940 Main Complex see Environmental Baseline Survey, Land Use Permit Request for the 9940 Complex PERM/0-KI-00-0001, August 21, 2003, and for details on the 9940 Complex Expansion see Environmental Baseline Survey, Proposed Land Use Permit Expansion for 9940 DETS Complex, June 24, 2009. The 2.7-acre parcel of land for the new parking lot, which is the subject of this EBS (also referred to as the “subject property”), is adjacent to the southwest boundary of the original 12.3- acre 9940 Main Complex. No testing is known to have taken place on the subject property site. The only activity known to have taken place was the burial of overhead utility lines in 2014. Adjacent to the subject property, the 9940 Main Complex was originally a 12.3-acre site used by the Department of Energy (DOE) under a land use permit from the United States Air Force (USAF). Historical use of the site, dating from 1964, included arming, fusing, and firing of explosives and testing of explosives systems components. In the late 1970s and early 1980s experiments at the 9940 Main Complex shifted toward reactor safety issues. From 1983 to 1988, fuel coolant interaction (FCI) experiments were conducted, as were experiments with conventional high explosives (HE). Today, the land is used for training of the Nuclear Emergency Response community and for research on energetic materials. In 2009, the original complex was expanded to include four additional 20-acre areas: 9940 Training South, 9940 Training East, T-Range 6, and Training West Landing Zone. The proposed use of

  15. Visitation patterns of principal species of the insect-complex at carcasses in the Kruger National Park

    Directory of Open Access Journals (Sweden)

    L.E.O Braack

    1981-12-01

    Full Text Available Two full-grown impala rams Aepyceros melampus were shot on 1978.01.07 in the Pafuri area of the Kruger National Park, Republic of South Africa. The carcasses were placed in enclosures 2,7 km apart and used to monitor the visitation patterns of insects. Collections of insects were made at four-hourly intervals for the first six days after placement of the carcasses, and thereafter every six hours up to the eleventh and final day. A figure is given to describe changes in the physical attributes of the carcasses through time. Twelve figures depict the patterns of arrival of insects at the carrion habitat. Species from the following families are represented: Cleridae, Dermestidae, Histeridae, Scarabaeidae, Silphidae, Staphylinidae, Trogidae (Coleoptera; Calliphoridae, Muscidae, Piophilidae, Sepsidae (Diptera; Diapriidae and Formicidae (Hymenoptera. The results indicate that species have distinctive periods of abundance and presents an overall picture of insect succession at carrion.

  16. Smart parking barrier

    KAUST Repository

    Alharbi, Abdulrazaq M.

    2016-01-01

    positioning of the movable parking barrier, and a parking controller configured to initiate movement of the parking barrier, via the barrier drive. The movable parking barrier can be positioned between a first position that restricts access to the parking

  17. Life cycle costs measurement of complex systems manufactured by an engineer-to-order company

    NARCIS (Netherlands)

    Öner, K.B.; Franssen, R.; Kiesmüller, G.P.; Houtum, van G.J.J.A.N.; Qui, R.G.; Russell, D.W.; Sullivan, W.G.

    2007-01-01

    Complex technical systems such as packaging lines, computer networks, material handling systems, are crucial for the operations at the companies (or institutions) where they are installed. Companies require high availability because their primary processes may halt when these systems are down. High

  18. Park Districts

    Data.gov (United States)

    Vermont Center for Geographic Information — The Parks Districts layer is part of a dataset contains administrative boundaries for Vermont's Agency of Natural Resources. The dataset includes feature classes for...

  19. Rubber pad forming - Efficient approach for the manufacturing of complex structured sheet metal blanks for food industry

    Science.gov (United States)

    Spoelstra, Paul; Djakow, Eugen; Homberg, Werner

    2017-10-01

    The production of complex organic shapes in sheet metals is gaining more importance in the food industry due to increasing functional and hygienic demands. Hence it is necessary to produce parts with complex geometries promoting cleanability and general sanitation leading to improvement of food safety. In this context, and especially when stainless steel has to be formed into highly complex geometries while maintaining desired surface properties, it is inevitable that alternative manufacturing processes will need to be used which meet these requirements. Rubber pad forming offers high potential when it comes to shaping complex parts with excellent surface quality, with virtually no tool marks and scratches. Especially in cases where only small series are to be produced, rubber pad forming processes offers both technological and economic advantages. Due to the flexible punch, variation in metal thickness can be used with the same forming tool. The investments to set-up Rubber pad forming is low in comparison to conventional sheet metal forming processes. The process facilitates production of shallow sheet metal parts with complex contours and bends. Different bending sequences in a multiple tool set-up can also be conducted. The planned contribution thus describes a brief overview of the rubber pad technology. It shows the prototype rubber pad forming machine which can be used to perform complex part geometries made from stainless steel (1.4301). Based on an analysis of the already existing systems and new machines for rubber pad forming processes, together with their process properties, influencing variables and areas of application, some relevant parts for the food industry are presented.

  20. Softball Complex

    Science.gov (United States)

    Ellis, Jim

    1977-01-01

    The Parks and Recreation Department of Montgomery, Alabama, has developed a five-field softball complex as part of a growing community park with facilities for camping, golf, aquatics, tennis, and picnicking. (MJB)

  1. Manufacture of a four-sheet complex component from different titanium alloys by superplastic forming

    Science.gov (United States)

    Allazadeh, M. R.; Zuelli, N.

    2017-10-01

    A superplastic forming (SPF) technology process was deployed to form a complex component with eight-pocket from a four-sheet sandwich panel sheetstock. Six sheetstock packs were composed of two core sheets made of Ti-6Al-4V or Ti-5Al-4Cr-4Mo-2Sn-2Zr titanium alloy and two skin sheets made of Ti-6Al-4V or Ti-6Al-2Sn-4Zr-2Mo titanium alloy in three different combinations. The sheets were welded with two subsequent welding patterns over the core and skin sheets to meet the required component's details. The applied welding methods were intermittent and continuous resistance seam welding for bonding the core sheets to each other and the skin sheets over the core panel, respectively. The final component configuration was predicted based on the die drawings and finite element method (FEM) simulations for the sandwich panels. An SPF system set-up with two inlet gas pipe feeding facilitated the trials to deliver two pressure-time load cycles acting simultaneously which were extracted from FEM analysis for specific forming temperature and strain rate. The SPF pressure-time cycles were optimized via GOM scanning and visually inspecting some sections of the packs in order to assess the levels of core panel formation during the inflation process of the sheetstock. Two sets of GOM scan results were compared via GOM software to inspect the surface and internal features of the inflated multisheet packs. The results highlighted the capability of the tested SPF process to form complex components from a flat multisheet pack made of different titanium alloys.

  2. ParkIndex

    DEFF Research Database (Denmark)

    Kaczynski, Andrew T; Schipperijn, Jasper; Hipp, J Aaron

    2016-01-01

    using ArcGIS 9.3 and the Community Park Audit Tool. Four park summary variables - distance to nearest park, and the number of parks, amount of park space, and average park quality index within 1 mile were analyzed in relation to park use using logistic regression. Coefficients for significant park......, planners, and citizens to evaluate the potential for park use for a given area. Data used for developing ParkIndex were collected in 2010 in Kansas City, Missouri (KCMO). Adult study participants (n=891) reported whether they used a park within the past month, and all parks in KCMO were mapped and audited...

  3. Isotopic and hydrogeochemical characterization of high-altitude karst aquifers in complex geological settings. The Ordesa and Monte Perdido National Park (Northern Spain) case study

    Energy Technology Data Exchange (ETDEWEB)

    Lambán, L.J., E-mail: javier.lamban@igme.es [Geological Survey of Spain (IGME) (Spain); Jódar, J., E-mail: jorge.jodar@upc.edu [Department of Geotechnical Engineering and Geosciences, Technical University of Catalonia (UPC), Barcelona (Spain); Custodio, E., E-mail: emilio.custodio@upc.edu [Department of Geotechnical Engineering and Geosciences, Technical University of Catalonia (UPC), Barcelona (Spain); Soler, A., E-mail: albertsoler@ub.edu [Grup de Mineralogia Aplicada i Medi Ambient, Departament Cristal lografia Mineralogia i Dipòsits Minerals, Facultat de Geologia, Universitat de Barcelona (UB) (Spain); Sapriza, G., E-mail: g.sapriza@usask.ca [Global Institute for Water Security, National Hydrology Research Centre (Canada); Soto, R., E-mail: r.soto@igme.es [Geological Survey of Spain (IGME) (Spain)

    2015-02-15

    The Ordesa and Monte Perdido National Park, located in the Southern Pyrenees, constitutes the highest karst system in Western Europe. No previous studies regarding its geochemical and isotopic groundwater characterization are available in this area. This work presents the results of field and sampling campaigns carried out between July 2007 and September 2013. The groundwater presents high calcium bicarbonate contents due to the occurrence of upper Cretaceous and lower Paleocene–Eocene carbonate materials in the studied area. Other relevant processes include dissolution of anhydrite and/or gypsum and incongruent dissolution of Mg-limestone and dolomite. The water stable isotopes (δ{sup 18}O, δ{sup 2}H) show that the oceanic fronts from the Atlantic Ocean are responsible for the high levels of precipitation. In autumn, winter, and spring, a deuterium excess is found in the recharge water, which could be related to local atmospheric transport of low-altitude snow sublimation vapour and its later condensation on the snow surface at higher altitude, where recharge is mostly produced. The recharge zones are mainly between 2500 m and 3200 m a.s.l. The tritium content of the water suggests short groundwater transit times. The isotopic composition of dissolved sulphate points to the existence of regional fluxes mixed with local discharge in some of the springs. This work highlights the major role played by the altitude difference between the recharge and discharge zones in controlling the chemistry and the vertical variability of the isotopic composition in high-altitude karst aquifers. - Highlights: • Environmental tracers are essential to study complex alpine karst aquifers. • The long presence of snow controls the deuterium excess in groundwater. • Seasonal δD content in springs depends on gap between recharge and discharge points. • The first hydrogeological characterization of the Ordesa National Park is presented. • Sulphate content in springs comes

  4. Management of quarry water and solid wastes from the San Rafael Mining and Manufacturing Complex

    International Nuclear Information System (INIS)

    Asenjo, Armando R.; Perrino, Juan F.

    2006-01-01

    San Rafael Mining and Milling Complex is located in Mendoza province, in San Rafael Department, 38 km West from San Rafael city and 240 km South from Mendoza city, capital of the province. Activities related with yellow cake production were performed from 1979 to 1999. Nowadays the mine and the plant are in stand by. At the moment technical, economic and environmental studies are being done in order to restart the activities. Different kind of residues are accumulated in the site: a) Tailing; b) Sludges; c) Low grade ores; e) Waste rock; f) Mine water; g) Solid residues (RS). In this paper methodology to treat mine water and solid residues (RS) will be informed. a) Mine water: 800.000 m 3 of mine water are accumulated in different open pit. Uranium, radium and arsenic are the main ions to take into account to treat the water. Several laboratory and pilot test have been performed in order to define the treatment of the water, according with the regulatory requirement. A methodology using anion exchange resin to fix uranium and precipitation using barium chloride and iron sulfate to separate radium and arsenic has been developed. b) Solid residues (RS): these residues (precipitates) have been produced by neutralization of effluents in a nuclear purification process (TBP process). They are accumulated in drums. These residues come from Cordoba plant, a factory which produces UO 2 powder. The total content of uranium in the precipitate is 14.249 kg with an average uranium concentration of 1,33%. A methodology using sulfuric acid dissolution of the precipitates and anion exchange resin to recovery the uranium has been developed. (author) [es

  5. Bismuth Infusion of ABS Enables Additive Manufacturing of Complex Radiological Phantoms and Shielding Equipment

    Directory of Open Access Journals (Sweden)

    Justin Ceh

    2017-02-01

    Full Text Available Radiopacity is a critical property of materials that are used for a range of radiological applications, including the development of phantom devices that emulate the radiodensity of native tissues and the production of protective equipment for personnel handling radioactive materials. Three-dimensional (3D printing is a fabrication platform that is well suited to creating complex anatomical replicas or custom labware to accomplish these radiological purposes. We created and tested multiple ABS (Acrylonitrile butadiene styrene filaments infused with varied concentrations of bismuth (1.2–2.7 g/cm3, a radiopaque metal that is compatible with plastic infusion, to address the poor gamma radiation attenuation of many mainstream 3D printing materials. X-ray computed tomography (CT experiments of these filaments indicated that a density of 1.2 g/cm3 of bismuth-infused ABS emulates bone radiopacity during X-ray CT imaging on preclinical and clinical scanners. ABS-bismuth filaments along with ABS were 3D printed to create an embedded human nasocranial anatomical phantom that mimicked radiological properties of native bone and soft tissue. Increasing the bismuth content in the filaments to 2.7 g/cm3 created a stable material that could attenuate 50% of 99mTechnetium gamma emission when printed with a 2.0 mm wall thickness. A shielded test tube rack was printed to attenuate source radiation as a protective measure for lab personnel. We demonstrated the utility of novel filaments to serve multiple radiological purposes, including the creation of anthropomorphic phantoms and safety labware, by tuning the level of radiation attenuation through material customization.

  6. Maryon Park

    OpenAIRE

    Bertoli, Giasco

    2018-01-01

    Tiré du site Internet de Onestar Press: "Maryon Park is the place Michelangelo Antonioni chose, in 1966, to shoot the scenes that would become cult images from his film "Blow Up", and deservedly so. The park is located in Charlton, southeast of London, a place that's hardly changed since Antonioni shot there. I first went there to shoot a series of photos on March 7 and 8, 2007. I returned again on March 7, 2014. I called the series “Maryon Park”. I used a medium format, six by seven inch col...

  7. Design and simulation of CONWIP in the complex flexible job shop of a Make-To-Order manufacturing firm ,

    Directory of Open Access Journals (Sweden)

    Giovanni Romagnoli

    2015-01-01

    Full Text Available This paper presents a methodology for the design and integration of CONWIP in a make-to-order firm. The approach proposed was applied directly to the flexible job shop of a real manufacturing firm in order to assess the validity of the methodology. After the description of the whole plant layout, attention was focused on a section of the shop floor (21 workstations. The CONWIP system deals with multiple-product families and is characterized by path-type cards and a pull-from-the-bottleneck scheme. The cards release strategy and a customized dispatching rule were created to meet the firm’s specific needs. After the simulation model of the present state was built and validated, the future state to be implemented was created and simulated (i.e. the CONWIP system. The comparison between the two systems achieved excellent results, and showed that CONWIP is a very interesting tool for planning and controlling a complex flexible job shop.

  8. Smart parking barrier

    KAUST Repository

    Alharbi, Abdulrazaq M.

    2016-05-06

    Various methods and systems are provided for smart parking barriers. In one example, among others, a smart parking barrier system includes a movable parking barrier located at one end of a parking space, a barrier drive configured to control positioning of the movable parking barrier, and a parking controller configured to initiate movement of the parking barrier, via the barrier drive. The movable parking barrier can be positioned between a first position that restricts access to the parking space and a second position that allows access to the parking space. The parking controller can initiate movement of the movable parking barrier in response to a positive identification of an individual allowed to use the parking space. The parking controller can identify the individual through, e.g., a RFID tag, a mobile device (e.g., a remote control, smartphone, tablet, etc.), an access card, biometric information, or other appropriate identifier.

  9. National Institutes of Health–Sponsored Clinical Islet Transplantation Consortium Phase 3 Trial: Manufacture of a Complex Cellular Product at Eight Processing Facilities

    Science.gov (United States)

    Balamurugan, A.N.; Szot, Gregory L.; Kin, Tatsuya; Liu, Chengyang; Czarniecki, Christine W.; Barbaro, Barbara; Bridges, Nancy D.; Cano, Jose; Clarke, William R.; Eggerman, Thomas L.; Hunsicker, Lawrence G.; Kaufman, Dixon B.; Khan, Aisha; Lafontant, David-Erick; Linetsky, Elina; Luo, Xunrong; Markmann, James F.; Naji, Ali; Korsgren, Olle; Oberholzer, Jose; Turgeon, Nicole A.; Brandhorst, Daniel; Chen, Xiaojuan; Friberg, Andrew S.; Lei, Ji; Wang, Ling-jia; Wilhelm, Joshua J.; Willits, Jamie; Zhang, Xiaomin; Hering, Bernhard J.; Posselt, Andrew M.; Stock, Peter G.; Shapiro, A.M. James

    2016-01-01

    Eight manufacturing facilities participating in the National Institutes of Health–sponsored Clinical Islet Transplantation (CIT) Consortium jointly developed and implemented a harmonized process for the manufacture of allogeneic purified human pancreatic islet (PHPI) product evaluated in a phase 3 trial in subjects with type 1 diabetes. Manufacturing was controlled by a common master production batch record, standard operating procedures that included acceptance criteria for deceased donor organ pancreata and critical raw materials, PHPI product specifications, certificate of analysis, and test methods. The process was compliant with Current Good Manufacturing Practices and Current Good Tissue Practices. This report describes the manufacturing process for 75 PHPI clinical lots and summarizes the results, including lot release. The results demonstrate the feasibility of implementing a harmonized process at multiple facilities for the manufacture of a complex cellular product. The quality systems and regulatory and operational strategies developed by the CIT Consortium yielded product lots that met the prespecified characteristics of safety, purity, potency, and identity and were successfully transplanted into 48 subjects. No adverse events attributable to the product and no cases of primary nonfunction were observed. PMID:27465220

  10. Ultra-Precision Manufacturing Technology for Miniature & Complex-Form Integrated Opto-Mechanical Structures for Sensors Payloads, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — We propose to demonstrate ultra precision manufacturing of components for NASA payloads, specifically for electro-optical and infrared sensors that are used in...

  11. Industrial based volume manufacturing of lightweight aluminium alloy panel components with high-strength and complex-shape for car body and chassis structures

    Science.gov (United States)

    Anyasodor, Gerald; Koroschetz, Christian

    2017-09-01

    To achieve the high volume manufacture of lightweight passenger cars at economic cost as required in the automotive industry, low density materials and new process route will be needed. While high strength aluminium alloy grades: AA7075 and AA6082 may provide the alternative material solution, hot stamping process used for high-strength and ultrahigh strength steels such as boron steel 22mnb5 can enable the volume manufacture of panel components with high-strength and complex-shape for car body and chassis structures. These aluminium alloy grades can be used to manufacture panel components with possible yield strengths ≥ 500 MPa. Due to the differences in material behaviors, hot stamping process of 22mnb5 cannot be directly applied to high strength aluminium alloy grades. Despite recorded successes in laboratories, researches and niche hot forming processes of high strength aluminium alloy grades, not much have been achieved for adequate and efficient volume manufacturing system applicable in the automotive industry. Due to lack of such system and based on expert knowledge in hot stamping production-line, AP&T presents in this paper a hot stamping processing route for high strength aluminium alloys been suitable for production-line development and volume manufacturing.

  12. Immersive Technology for Human-Centric Cyberphysical Systems in Complex Manufacturing Processes: A Comprehensive Overview of the Global Patent Profile Using Collective Intelligence

    Directory of Open Access Journals (Sweden)

    Usharani Hareesh Govindarajan

    2018-01-01

    Full Text Available Immersive technology for human-centric cyberphysical systems includes broad concepts that enable users in the physical world to connect with the cyberworld with a sense of immersion. Complex systems such as virtual reality, augmented reality, brain-computer interfaces, and brain-machine interfaces are emerging as immersive technologies that have the potential for improving manufacturing systems. Industry 4.0 includes all technologies, standards, and frameworks for the fourth industrial revolution to facilitate intelligent manufacturing. Industrial immersive technologies will be used for smart manufacturing innovation in the context of Industry 4.0’s human machine interfaces. This research provides a thorough review of the literature, construction of a domain ontology, presentation of patent metatrend statistical analysis, and data mining analysis using a technology function matrix and highlights technical and functional development trends using latent Dirichlet allocation (LDA models. A total of 179 references from the IEEE and IET databases and 2,672 patents are systematically analyzed to identify current trends. The paper establishes an essential foundation for the development of advanced human-centric cyberphysical systems in complex manufacturing processes.

  13. Study on Complex Advertising and Price Competition Dual-Channel Supply Chain Models Considering the Overconfidence Manufacturer

    Directory of Open Access Journals (Sweden)

    Junhai Ma

    2016-01-01

    Full Text Available In order to explore how the manufacturers make decisions when two manufacturers compete for local advertising investment, we examine two noncooperative models (Stackelberg and Nash game and propose a cost sharing contract to investigate channel competition of dual-channel supply chain. The dominant power between manufacturer and retailer and the effect of channel competition strategy on price are mainly discussed. In addition, dynamic system concepts are integrated into Stackelberg game model based on bounded rational mechanism. We analyze the local stability and find that the stability level of the dual-channel supply chains depends crucially on the price adjustment speed, the level of demand uncertainty, and the risk preference. The outcome shows that, under the master-slave game model, the profits of manufacturers are greater than that under decentralized decision-making mode, and the profits of retailers under master-slave game model are less than that under decentralized decision-making mode. The profits of manufacturers and retailers in the stable region are greater than that in unstable region. Finally, the delay feedback control method is utilized and effectively controls the chaotic behavior of dual-channel supply chain model. The results have theoretical and practical significance for the game models in terms of advertising and price competition.

  14. Product Quality Improvement Using FMEA for Electric Parking Brake (EPB)

    Science.gov (United States)

    Dumitrescu, C. D.; Gruber, G. C.; Tişcă, I. A.

    2016-08-01

    One of the most frequently used methods to improve product quality is complex FMEA. (Failure Modes and Effects Analyses). In the literature various FMEA is known, depending on the mode and depending on the targets; we mention here some of these names: Failure Modes and Effects Analysis Process, or analysis Failure Mode and Effects Reported (FMECA). Whatever option is supported by the work team, the goal of the method is the same: optimize product design activities in research, design processes, implementation of manufacturing processes, optimization of mining product to beneficiaries. According to a market survey conducted on parts suppliers to vehicle manufacturers FMEA method is used in 75%. One purpose of the application is that after the research and product development is considered resolved, any errors which may be detected; another purpose of applying the method is initiating appropriate measures to avoid mistakes. Achieving these two goals leads to a high level distribution in applying, to avoid errors already in the design phase of the product, thereby avoiding the emergence and development of additional costs in later stages of product manufacturing. During application of FMEA method using standardized forms; with their help will establish the initial assemblies of product structure, in which all components will be viewed without error. The work is an application of the method FMEA quality components to optimize the structure of the electrical parking brake (Electric Parching Brake - E.P.B). This is a component attached to the roller system which ensures automotive replacement of conventional mechanical parking brake while ensuring its comfort, functionality, durability and saves space in the passenger compartment. The paper describes the levels at which they appealed in applying FMEA, working arrangements in the 4 distinct levels of analysis, and how to determine the number of risk (Risk Priority Number); the analysis of risk factors and established

  15. Parks of Chapel Hill

    Data.gov (United States)

    Town of Chapel Hill, North Carolina — Hours, location, and amenity information for Chapel Hill parks as shown on the Town of Chapel Hill's website. Includes a map with points for each park location.

  16. State Park Trails

    Data.gov (United States)

    Minnesota Department of Natural Resources — This data set is a collection of ArcView shapefiles (by park) of trails within statutory boundaries of individual MN State Parks, State Recreation Areas and State...

  17. Landscape of Industry: Transformation of (Eco Industrial Park through history

    Directory of Open Access Journals (Sweden)

    Archana Sharma

    2013-11-01

    Full Text Available The landscape of industry has been changing over time. Industry has transformed and many tangents have emerged from the sporadic home-based cottage industries to geographically scattered large manufacturing industries to co-located industrial parks to environment friendly eco-industrial parks. Curiosity about the catalysts that bring about the transformation of industrial landscape is the motivation of this article. Through the narrative on Industrial Park and the gradual shift towards Eco-Industrial Park, this article aims to shed light on the context and conditions that act as catalysts for industrial transformations, so as to serve as a reference for predicting future changes in industrial landscape.

  18. SMART VEHICLE PARKING

    OpenAIRE

    S.Bharath Ram

    2016-01-01

    The goal of this project is to count the number of empty car parking areas and to display them in a Website. This system consists of sensors attached to several parking areas. These sensors located in different parking area’s detects the presence of vehicle and sends information to Microcontroller, which calculates the number of available empty parking areas and uploads them in a website. This basically works on the principle of Internet of Things here the sensors are connected to internet.

  19. Manufacturing Initiative

    Data.gov (United States)

    National Aeronautics and Space Administration — The Advanced Manufacturing Technologies (AMT) Project supports multiple activities within the Administration's National Manufacturing Initiative. A key component of...

  20. Interview with Steve Parks

    Science.gov (United States)

    Hitchcock, Jennifer

    2016-01-01

    Jennifer Hitchcock interviews community activist and director of Syracuse University's Composition and Cultural Rhetoric doctoral program, Steve Parks. They discuss Parks's working-class background, career path, influences, and activism. Parks also considers the direction of the field of composition and rhetoric and expresses optimism for the…

  1. Performance evaluation of a full-scale ABS resin manufacturing wastewater treatment plant: a case study in Tabriz Petrochemical Complex

    Directory of Open Access Journals (Sweden)

    Mohammad Shakerkhatibi

    2016-08-01

    Full Text Available Background: The measurement data regarding the influent and effluent of wastewater treatment plant (WWTP provides a general overview, demonstrating an overall performance of WWTP. Nevertheless, these data do not provide the suitable operational information for the optimization of individual units involved in a WWTP. A full-scale evolution of WWTP was carried out in this study via a reconciled data. Methods: A full-scale evolution of acrylonitrile, butadiene and styrene (ABS resin manufacturing WWTP was carried out. Data reconciliation technique was employed to fulfil the mass conservation law and also enhance the accuracy of the flow measurements. Daily average values from long-term measurements by the WWTP library along with the results of four sampling runs, were utilized for data reconciliation with further performance evaluation and characterization of WWTP. Results: The full-scale evaluation, based on balanced data showed that removal efficiency based on chemical oxygen demand (COD and biochemical oxygen demand (BOD5 through the WWTP were 80% and 90%, respectively, from which only 28% of COD and 20% of BOD5 removal had occurred in biological reactor. In addition, the removal efficiency of styrene and acrylonitrile, throughout the plant, was approximately 90%. Estimation results employing Toxchem model showed that 43% of acrylonitrile and 85% of styrene were emitted into the atmosphere above water surfaces. Conclusion: It can be concluded that the volatilization of styrene and acrylonitrile is the main mechanism for their removal along with corresponded COD elimination from the WWTP.

  2. Exploration of Science Parks

    Institute of Scientific and Technical Information of China (English)

    Xiong Huibing; Sun Nengli

    2005-01-01

    Science parks have developed gready in the world, whereas empirical researches have showed that science parks based on linear model cannot guarantee the creation of innovation. Hi-tech innovation is derived from flow and management of information. The commercial and social interactions between in-parks and off-park firms and research institutions act as the key determinant for innovation.Industrial clustering is the rational choice for further developing Chinese science parks and solving some problems such as the lack of dear major industries and strong innovation sense, etc.

  3. Application of Lean Manufacturing in Hospitals-the Need to Consider Maturity, Complexity, and the Value Concept

    DEFF Research Database (Denmark)

    Hasle, Peter; Nielsen, Anders Paarup; Edwards, Kasper

    2016-01-01

    Lean is widely applied in hospitals, but the impact tends to be limited. This paper investigates three possible explanations: 1) maturity, 2) complexity, and 3) the value concept and analyses the bearing of these in a case study of lean application in a large Danish university hospital. The results...... indicate that lean tends to be applied in secondary and support functions with a logistic character and therefore has had a limited impact on the overall healthcare performance. The case study shows that there are constraints related to low lean maturity, the complexity of processes and operations as well...... in hospitals in order to bring about a larger impact. It is therefore necessary to develop new models for the lean concept as well as the implementation of lean adapted to the particular context of hospitals with a stronger focus on patient experiences and on coordination of social relations....

  4. Social manufacturing

    OpenAIRE

    Hamalainen, Markko; Karjalainen, Jesse

    2017-01-01

    New business models harnessing the power of individuals have already revolutionized service industries and digital content production. In this study, we investigate whether a similar phenomenon is taking place in manufacturing industries. We start by conceptually defining two distinct forms of firm-individual collaboration in manufacturing industries: (1) social cloud manufacturing, in which firms outsource manufacturing to individuals, and (2) social platform manufacturing, in which firms pr...

  5. Parking Navigation for Alleviating Congestion in Multilevel Parking Facility

    OpenAIRE

    Kenmotsu, Masahiro; Sun, Weihua; Shibata, Naoki; Yasumoto, Keiichi; Ito, Minoru

    2012-01-01

    Finding a vacant parking space in a large crowded parking facility takes long time. In this paper, we propose a navigation method that minimizes the parking time based on collected real-time positional information of cars. In the proposed method, a central server in the parking facility collects the information and estimates the occupancy of each parking zone. Then, the server broadcasts the occupancy data to the cars in the parking facility. Each car then computes a parking route with the sh...

  6. Perspectives of the Si3N4-TiN ceramic composite as a biomaterial and manufacturing of complex-shaped implantable devices by electrical discharge machining (EDM).

    Science.gov (United States)

    Bucciotti, Francesco; Mazzocchi, Mauro; Bellosi, Alida

    2010-01-01

    In this work we investigated the suitability of electroconductive silicon nitride/titanium nitride composite for biomedical implantable devices with particular attention on the processing route that allows the net-shaping of complex components by electrical discharge machining (EDM). The composite, constituted mainly of a beta-Si3N4, dispersed TiN grains and a glassy grain boundary phase, exhibited a low density and high hardness, strength and toughness. Bulk, surface characteristics and properties of the Si3N4-TiN composite were analyzed. After the EDM process, the microstructure of the machined surface was examined. The obtained results showed that the Si3N4-TiN ceramic composite together with the EDM manufacturing process might potentially play a key role in implantable load-bearing prosthesis applications.

  7. Pulsars at Parkes

    OpenAIRE

    Manchester, R. N.

    2012-01-01

    The first pulsar observations were made at Parkes on March 8, 1968, just 13 days after the publication of the discovery paper by Hewish and Bell. Since then, Parkes has become the world's most successful pulsar search machine, discovering nearly two thirds of the known pulsars, among them many highly significant objects. It has also led the world in pulsar polarisation and timing studies. In this talk I will review the highlights of pulsar work at Parkes from those 1968 observations to about ...

  8. Constituents in oil field produced waters discharged into the Loch Katrine wetland complex, Park County, Wyoming, and their bioconcentration in the aquatic bird food chain

    International Nuclear Information System (INIS)

    Ramirez, P. Jr.

    1993-01-01

    Trace elements, hydrocarbons and radium-226 concentrations were analyzed in water, sediment and biota from the Loch Katrine wetlands at Park County, WY in 1992. This study was designed to determine if produced waters pose a risk to aquatic birds inhabiting the wetlands. The radium-226 concentration recorded at the Sidney Battery Discharge in July, 93.7 pCi/l, exceeded WY DEQ's 60 pCi/l standard for the protection of aquatic life. Water quality acute criteria were exceeded for arsenic, Custer Lake, July, and for zinc, Sidney Battery discharge, April. Radium-226 concentrations in sediments from Custer Lake and Sidney Battery Discharge exceeded the 3 pCi/g background for Oregon Basin soils. The radium-226 concentration in aquatic vegetation, Custer Lake, 29.5 pCi/g, greatly exceeded the 2.9 pCi/g average concentration found in plants growing in uranium mill tailings in South Dakota. Radium-226 in aquatic vegetation may be available to aquatic birds. Oil and grease concentrations, Sidney Battery Discharge, exceeded the 10 mg/l standard of WY DEQ. Sediment hydrocarbon concentrations were highest at Sidney Battery Discharge, 6.376 μg/g, followed by Custer Lake, 1.104 μg/g. Benzo(a)pyrene was not detected in gadwalls from Loch Katrine but was detected in northern shovelers from Custer Lake. Benzo(a)pyrene concentrations in northern shoveler bile ranged from 500 to 960 ng/g (ppb) wet weight. Benzo(a)pyrene concentrations in shovelers is indicative of exposure to petroleum hydrocarbons

  9. Precision manufacturing

    CERN Document Server

    Dornfeld, David

    2008-01-01

    Today there is a high demand for high-precision products. The manufacturing processes are now highly sophisticated and derive from a specialized genre called precision engineering. Precision Manufacturing provides an introduction to precision engineering and manufacturing with an emphasis on the design and performance of precision machines and machine tools, metrology, tooling elements, machine structures, sources of error, precision machining processes and precision process planning. As well as discussing the critical role precision machine design for manufacturing has had in technological developments over the last few hundred years. In addition, the influence of sustainable manufacturing requirements in precision processes is introduced. Drawing upon years of practical experience and using numerous examples and illustrative applications, David Dornfeld and Dae-Eun Lee cover precision manufacturing as it applies to: The importance of measurement and metrology in the context of Precision Manufacturing. Th...

  10. iPark

    DEFF Research Database (Denmark)

    Yang, Bin; Fantini, Ernesto Nicolas; Jensen, Christian S.

    2013-01-01

    where the geo-spatial aspect is not just a tag on other content, but is the primary content, e.g., a city street map with up-to-date road construction data. Along these lines, the iPark system aims to turn volumes of GPS data obtained from vehicles into information about the locations of parking spaces...

  11. THE SCHOOL PARK.

    Science.gov (United States)

    FISCHER, JOHN H.

    TO ASSIST IN DESEGREGATION, VARIOUS MODELS FOR THE SCHOOL PARK ARE PROPOSED--(1) ASSEMBLING ALL STUDENTS AND SCHOOLS OF A SMALL OR MEDIUM-SIZED COMMUNITY ON A SINGLE CAMPUS, (2) SERVING ONE SECTION OF A LARGE CITY, (3) CENTERING ALL SCHOOL FACILITIES FOR A SINGLE LEVEL OF EDUCATION ON A SINGLE SITE, AND (4) ESTABLISHING RINGS OF SCHOOL PARKS ABOUT…

  12. Parking Space Verification

    DEFF Research Database (Denmark)

    Høg Peter Jensen, Troels; Thomsen Schmidt, Helge; Dyremose Bodin, Niels

    2018-01-01

    system, based on a Convolutional Neural Network, that is capable of determining if a parking space is occupied or not. A benchmark database consisting of images captured from different parking areas, under different weather and illumination conditions, has been used to train and test the system...

  13. Bicycle Parking and Locking

    DEFF Research Database (Denmark)

    Larsen, Jonas

    2017-01-01

    . This article contributes with new insights into parking and locking - ‘moorings’ - to cycling literature. It presents an ethnography of ‘design moorings’ and practices associated with parking and locking bikes. The main case study is the very pro-cycling city of Copenhagen. Yet to explore what is unique about...

  14. The state of biopharmaceutical manufacturing.

    Science.gov (United States)

    Molowa, David T; Mazanet, Rosemary

    2003-01-01

    The manufacturing of protein-based biopharmaceuticals is done in bacterial or mammalian cell cultures. While bacterial cultures are inexpensive, dependable, and approved by regulatory authorities, many complex proteins cannot be manufactured this way. Complex proteins must be manufactured in mammalian cell cultures to produce active products. Mammalian cell culture capacity is limited and has slowed the delivery of necessary biopharmaceutical products to patients. The nature of the production capacity problem and future outlook are critically examined.

  15. Parks and their users

    Directory of Open Access Journals (Sweden)

    Barbara Goličnik

    2008-01-01

    Full Text Available This paper is concerned with urban parks and their use(rs. It focuses on usage-spatial relationships from two different angles. Firstly, it discusses the actual uses mapped in places, using repeated observation on different days, times and weather conditions. Secondly, it addresses designers’ views and beliefs about usage and design of urban parks. However, the paper shows that designers’ beliefs and awareness about uses in places, in some aspects, differ from actual use. It stresses the use of empirical knowledge about usage-spatial relationships, which can be gained by using observation and behavioural mapping, in decision-making processes for parks design.

  16. Hazardous Waste Cleanup: Eastman Business Park in Rochester, New York

    Science.gov (United States)

    Eastman Business Park EBP (formerly Eastman Business Kodak Park) is approximately 1,100 acres complex across nearly four miles through the City of Rochester and the Town of Greece. Although it has filed for bankruptcy on January 19, 2012 and is undergoin

  17. Additive manufacturing.

    Science.gov (United States)

    Mumith, A; Thomas, M; Shah, Z; Coathup, M; Blunn, G

    2018-04-01

    Increasing innovation in rapid prototyping (RP) and additive manufacturing (AM), also known as 3D printing, is bringing about major changes in translational surgical research. This review describes the current position in the use of additive manufacturing in orthopaedic surgery. Cite this article: Bone Joint J 2018;100-B:455-60.

  18. Manufacturing technologies

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-09-01

    The Manufacturing Technologies Center is an integral part of Sandia National Laboratories, a multiprogram engineering and science laboratory, operated for the Department of Energy (DOE) with major facilities at Albuquerque, New Mexico, and Livermore, California. Our Center is at the core of Sandia`s Advanced Manufacturing effort which spans the entire product realization process.

  19. Versailles' park taasavatud

    Index Scriptorium Estoniae

    2000-01-01

    Osa Pariisi lähedase Versailles' lossi pargist avati jaanuari alguses uuesti publikule. 17.-18. sajandi prantsuse stiilis park suleti avalikkusele detsembris 1999 pärast parki laastanud hiigeltormi, mis murdis ligemale 10000 puud.

  20. New Mexico Parks

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — This dataset provides an initial version of the locations of parks in New Mexico, in point form, with limited attributes, compiled using available data from a...

  1. New Mexico State Parks

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — This dataset provides an initial version of the generalized physical boundaries of New Mexico State Parks, in polygonal form with limited attributes, compiled using...

  2. Allegheny County Parks Outlines

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — Shows the size and shape of the nine Allegheny County parks. If viewing this description on the Western Pennsylvania Regional Data Center’s open data portal...

  3. State Park Statutory Boundaries

    Data.gov (United States)

    Minnesota Department of Natural Resources — Legislative statutory boundaries for sixty six state parks, six state recreation areas, and eight state waysides. These data are derived principally from DNR's...

  4. The Open Space Sculptures Used in the Gençlik Park towards Visual Perception of Park Users

    Directory of Open Access Journals (Sweden)

    Ahmet Polat

    2012-11-01

    Full Text Available Urban parks are the most important areas that allow recreational activities in our towns. Increasing the visual quality of urban parks provides positive impacts on urban quality. Besides the artistic and technical features of open space sculptures which are used for urban park designs are the visual perceptions and preferences of park users are also important. In the context of this study, six sculptures in Gençlik Park which is in the boundaries Ankara have been considered. The aim of the study, to measure the visual quality of the sculptures in the urban parks through park users and to reveal the relationship between visual landscape indicators (of being interesting, coherence, complexity, meaningfulness, and mystery and the visual quality. For this purpose, the six pieces in Ankara Youth Park of sculpture were evaluated the scope of research. According to the results of the study; it was realized that park users like sculptures visually. A statistically significant relationship was found between the visual quality of the sculptures and some landscape indicators (to be interesting, mystery and harmony. In addition to these, some suggestions were made regarding the use of sculptures in urban parks.

  5. SCIENCE AND TECHNOLOGY PARKS

    Directory of Open Access Journals (Sweden)

    Miroslav Milutinović

    2014-04-01

    Full Text Available The establishment of science and technology parks is necessarily accompanied by the establishment of a base of professional staff as the foundation of the park and the base of the potential management that will manage the park and the professional staff. Science and Technology Park is a broader term used to describe a variety of attempts directed at enhancing the entrepreneurship development by means of establishing knowledge – based, small and medium-sized enterprises. The enterprise at the top of the technology pyramid receives support in the form of capital, administration, space and access to new information technologies. The overall objective of the development of industrial enterprises in the technology park is the introduction of economically profitable production with the efficient usage of nonrenewable resources and the application of the highest environmental standards. Achieving the primary developmental objective of the Technology Park includes: creating a favorable business atmosphere in the local community, attractive to both foreign and domestic investors – providing support to the establishment of small and medium-sized enterprises using different models of joint ventures and direct foreign investment.

  6. The Assessment of Vulnerability of Industrial Parks to Climate Change in South Korea

    Science.gov (United States)

    Ryu, J. E.; Lee, D. K.; Jung, T. Y.; Choi, K. L.; Lee, S. H.

    2014-12-01

    Many countries are developing policy and measures to adapt to climate changes at the national and local levels, but the assessment of vulnerability to climate change and the establishment of countermeasures in the industries considering industrial factors such as worker, infrastructure are insufficient due to the characteristics of diverse processes and fields. In South Korea, the national government provides infrastructures for industrial parks where various companies in manufacturing and other industries are concentrated . Because of their concentration, damages can aggravate in case of natural disasters such as typhoons. In this study, vulnerability indices for climate change were developed and evaluated using climate scenarios for the climate exposure of localized terrential downpour for eight industrial parks. The vulnerability indices were selected and reviewed through literature review and two in-depth interviews with experts in various industries, and the assessment of vulnerability to climate change was conducted by collecting relevant information including the Directory of Industrial Complexes. The vulnerability of each industrial park to climate change was assessed for four time serious such as the base line, 2020s, 2050s, and 2100s . As a result, even though the possibility of localized heavy rain was the highest in Yeosu(Southeast coast) at present, but it was predicted that Gwangyang(Southwest coast) will be higher in the future. For the influences of climate including sensitivity, Ulsan Mipo(Southeast coast) is currently under the highest influence of climate, but the Gumi(Inland area) was forecasted to be under the highest influence of climate in the future. As a result of the assessment of vulnerability to climate change including adaptive capacity, Gumi and Myongji Noksan(Southeast coast) were most vulnerable to localized heavy rain. The degree of vulnerability of all the industrial parks except Ulsan and Yeosu was forecasted to increase in the

  7. Micro Manufacturing

    DEFF Research Database (Denmark)

    Hansen, Hans Nørgaard

    2003-01-01

    Manufacturing deals with systems that include products, processes, materials and production systems. These systems have functional requirements, constraints, design parameters and process variables. They must be decomposed in a systematic manner to achieve the best possible system performance....... If a micro manufacturing system isn’t designed rationally and correctly, it will be high-cost, unreliable, and not robust. For micro products and systems it is a continuously increasing challenge to create the operational basis for an industrial production. As the products through product development...... processes are made applicable to a large number of customers, the pressure in regard to developing production technologies that make it possible to produce the products at a reasonable price and in large numbers is growing. The micro/nano manufacturing programme at the Department of Manufacturing...

  8. Smart Manufacturing.

    Science.gov (United States)

    Davis, Jim; Edgar, Thomas; Graybill, Robert; Korambath, Prakashan; Schott, Brian; Swink, Denise; Wang, Jianwu; Wetzel, Jim

    2015-01-01

    Historic manufacturing enterprises based on vertically optimized companies, practices, market share, and competitiveness are giving way to enterprises that are responsive across an entire value chain to demand dynamic markets and customized product value adds; increased expectations for environmental sustainability, reduced energy usage, and zero incidents; and faster technology and product adoption. Agile innovation and manufacturing combined with radically increased productivity become engines for competitiveness and reinvestment, not simply for decreased cost. A focus on agility, productivity, energy, and environmental sustainability produces opportunities that are far beyond reducing market volatility. Agility directly impacts innovation, time-to-market, and faster, broader exploration of the trade space. These changes, the forces driving them, and new network-based information technologies offering unprecedented insights and analysis are motivating the advent of smart manufacturing and new information technology infrastructure for manufacturing.

  9. Turbine airfoil manufacturing technology

    Energy Technology Data Exchange (ETDEWEB)

    Kortovich, C. [PCC Airfoils, Inc., Beachwood, OH (United States)

    1995-12-31

    The specific goal of this program is to define manufacturing methods that will allow single crystal technology to be applied to complex-cored airfoils components for power generation applications. Tasks addressed include: alloy melt practice to reduce the sulfur content; improvement of casting process; core materials design; and grain orientation control.

  10. Temperature rise and Heat build up inside a parked Car

    Science.gov (United States)

    Coady, Rose; Maheswaranathan, Ponn

    2001-11-01

    We have studied the heat build up inside a parked car under the hot summer Sun. Inside and outside temperatures were monitored every ten seconds from 9 AM to about 4 PM for a 2000 Toyota Camry parked in a Winthrop University parking lot without any shades or trees. Two PASCO temperature sensors, one inside the car and the other outside the car, are used along with PASCO-750 interface to collect the data. Data were collected under the following conditions while keeping track of the outside weather: fully closed windows, slightly open windows, half way open windows, fully open windows, and with window shades inside and outside. Inside temperatures reached as high as 150 degrees Fahrenheit on a sunny day with outside high temperature of about 100 degrees Fahrenheit. These results will be presented along with results from car cover and window tint manufacturers and suggestions to keep your car cool next time you park it under the Sun.

  11. Geology of National Parks

    Science.gov (United States)

    Stoffer, Philip W.

    2008-01-01

    This is a set of two sheets of 3D images showing geologic features of many National Parks. Red-and-cyan viewing glasses are need to see the three-dimensional effect. A search on the World Wide Web will yield many sites about anaglyphs and where to get 3D glasses. Red-blue glasses will do but red-cyan glasses are a little better. This publication features a photo quiz game: Name that park! where you can explore, interpret, and identify selected park landscapes. Can you identify landscape features in the images? Can you explain processes that may have helped form the landscape features? You can get the answers online.

  12. Some aspects of identity, meaning and park sustainability research, with special reference to Kamenički park

    Directory of Open Access Journals (Sweden)

    Bajić Luka

    2011-01-01

    Full Text Available One of the main goals of urban planning by principles of sustainable development is the pursuit of diversity in structure, form and function in planning and design of urban public space. It is therefore necessary to redefine the concept and function of urban green areas and city parks, with the recommendation of identity preservation and promotion of social cohesion of this type of public space. In a theoretical sense, there is a problem of planning and designing urban parks in Serbia. This is due to failure to recognize the complexity underlying the possible role of urban public parks as an engine of urban renewal in the city or of any of his districts. Example of Kamenički park was chosen because of its complexity - in addition to being the largest green space in the city, this park also has high natural and cultural values (the park is protected as a cultural and natural heritage. The results indicate the reduced use of urban space. Based on existing theory and insights into the local planning process, general recommendations for improving its quality is the improvement of form/design of the park and it is necessary to define and promote the identity of space through the spatial analysis. The ultimate goal is to successfully respond to existing and potential customers' needs and thus define environmental, economic, cultural and social sustainability, which are key factors in managing the park.

  13. Developments in fuel manufacturing

    International Nuclear Information System (INIS)

    Williams, T.

    1997-01-01

    BNFL has a long tradition of willingness to embrace technological challenge and a dedication to quality. This paper describes advances in the overall manufacturing philosophy at BNFL's Fuel Business Group and then covers how some new technologies are currently being employed in BNFL Fuel Business Group's flagship oxide complex (OFC), which is currently in its final stages of commissioning. This plant represents a total investment of some Pound 200 million. This paper also describes how these technologies are also being deployed in BNFL's MOX plant now being built at Sellafield and, finally, covers some new processes being developed for advanced fuel manufacture. (author)

  14. "South Park" vormistab roppused muusikalivormi

    Index Scriptorium Estoniae

    2000-01-01

    Animafilm "South Park : suurem, pikem ja lõikamata" ("South Park . Bigger, Longer & Uncut") : Stsenaristid Trey Parker, Matt Stone ja Pam Brady : režissöör Trey Parker : Ameerika Ühendriigid 1999

  15. Allegheny County Park Rangers Outreach

    Data.gov (United States)

    Allegheny County / City of Pittsburgh / Western PA Regional Data Center — Launched in June 2015, the Allegheny County Park Rangers program reached over 48,000 people in its first year. Park Rangers interact with residents of all ages and...

  16. fantsika National Park

    African Journals Online (AJOL)

    Station, a dry deciduous forest within Ankarafantsika National. Park. We set Sherman ... dry deciduous forests compared to research in the eastern rainforests (Goodman et al. .... the ground, this rat was observed on both the ground and trees. We tentatively .... Conservation International, Washington DC. Carleton, M. D. ...

  17. fantsika National Park

    African Journals Online (AJOL)

    We often observed domestic mammals such as cattle, cats and dogs in the forest at Ampijoroa. Although the primary forest in Ampijoroa is managed by Madagascar National Parks, local people leave these domestic animals in the forest. Introduced animals may be a threat to endemic animals. Cattle can be transmitters of ...

  18. LEAN Manufacturing

    DEFF Research Database (Denmark)

    Bilberg, Arne

    . The mission with the strategy is to obtain competitive production in Denmark and in Western Europe based on the right combination of manufacturing principles, motivated and trained employees, level of automation, and cooperation with suppliers and customers worldwide. The strategy has resulted in technical...

  19. Semiconductor Manufacturing equipment introduction

    International Nuclear Information System (INIS)

    Im, Jong Sun

    2001-02-01

    This book deals with semiconductor manufacturing equipment. It is comprised of nine chapters, which are manufacturing process of semiconductor device, history of semiconductor manufacturing equipment, kinds and role of semiconductor manufacturing equipment, construction and method of semiconductor manufacturing equipment, introduction of various semiconductor manufacturing equipment, spots of semiconductor manufacturing, technical elements of semiconductor manufacturing equipment, road map of technology of semiconductor manufacturing equipment and semiconductor manufacturing equipment in the 21st century.

  20. Modelling parking behaviour considering heterogeneity

    Energy Technology Data Exchange (ETDEWEB)

    San Martin, G.A.; Ibeas Portilla, A.; Alonso Oreña, B.; Olio, L. del

    2016-07-01

    Most of motorized trips in cities of middle and small size are made in public transport and mainly in private vehicle, this has caused a saturation in parking systems of the cities, causing important problems to society, one of the most important problems is high occupancy of public space by parking systems. Thus, is required the estimation of models that reproduce users’ behaviour when they are choosing for parking in cities, to carry out transport policies to improve transport efficiency and parking systems in the cities. The aim of this paper is the specification and estimation of models that simulate users’ behaviour when they are choosing among alternatives of parking that there are in the city: free on street parking, paid on street parking, paid on underground parking and Park and Ride (now there isn´t). For this purpose, is proposed a multinomial logit model that consider systematic and random variations in tastes. Data of users’ behaviour from the different alternatives of parking have been obtained with a stated preference surveys campaign which have been done in May 2015 in the principal parking zones of the city of Santander. In this paper, we provide a number of improvements to previously developed methodologies because of we consider much more realism to create the scenarios stated preference survey, obtaining better adjustments. (Author)

  1. KGS Based Control for Parking Brake Cable Manufacturing System

    OpenAIRE

    Geeta Khare; R.S. Prasad

    2011-01-01

    In today’s competitive production environment, process industries, demand a totally integrated control and optimization solution that can increase productivity, reliability and quality while minimizing cost. Automation is a step beyond mechanization. For automation of production plant either centralized or distributed control system are used. There are standardized approaches and standard hardware & software available worldwide as per the requirement. Investment in process control system is a...

  2. Services for People Innovation Park – Planning Methodologies

    Directory of Open Access Journals (Sweden)

    Maria Angela Campelo de Melo

    2013-04-01

    Full Text Available This article aims to identify appropriate methodologies for the planning of a Services for People Innovation Park-SPIP, designed according to the model proposed by the Ibero-American Network launched by La Salle University of Madrid. Projected to form a network, these parks were conceived to provoke social change in their region, improving quality of life and social welfare, through knowledge, technology and innovation transfer and creation of companies focused on developing product and services to reduce social inequalities. Building a conceptual framework for the identification of planning methodologies compatible with the SPIP problemátique, this article analyses the theories of complex systems and adaptive planning, considering the particularities presented by Innovation Parks. The study deepens the understanding of the problems inherent in park planning, identifies the key issues to be considered during this process, and characterizes the SPIP as active adaptive complex system, suggesting methodologies more appropriate to its planning.

  3. Green Manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    Patten, John

    2013-12-31

    Green Manufacturing Initiative (GMI): The initiative provides a conduit between the university and industry to facilitate cooperative research programs of mutual interest to support green (sustainable) goals and efforts. In addition to the operational savings that greener practices can bring, emerging market demands and governmental regulations are making the move to sustainable manufacturing a necessity for success. The funding supports collaborative activities among universities such as the University of Michigan, Michigan State University and Purdue University and among 40 companies to enhance economic and workforce development and provide the potential of technology transfer. WMU participants in the GMI activities included 20 faculty, over 25 students and many staff from across the College of Engineering and Applied Sciences; the College of Arts and Sciences' departments of Chemistry, Physics, Biology and Geology; the College of Business; the Environmental Research Institute; and the Environmental Studies Program. Many outside organizations also contribute to the GMI's success, including Southwest Michigan First; The Right Place of Grand Rapids, MI; Michigan Department of Environmental Quality; the Michigan Department of Energy, Labor and Economic Growth; and the Michigan Manufacturers Technical Center.

  4. Mount Rainier National Park

    Science.gov (United States)

    Hoffman, Robert; Woodward, Andrea; Haggerty, Patricia K.; Jenkins, Kurt J.; Griffin, Paul C.; Adams, Michael J.; Hagar, Joan; Cummings, Tonnie; Duriscoe, Dan; Kopper, Karen; Riedel, Jon; Samora, Barbara; Marin, Lelaina; Mauger, Guillaume S.; Bumbaco, Karen; Littell, Jeremy S.

    2014-01-01

    Natural Resource Condition Assessments (NRCAs) evaluate current conditions for a subset of natural resources and resource indicators in national parks. NRCAs also report on trends in resource condition (when possible), identify critical data gaps, and characterize a general level of confidence for study findings. The resources and indicators emphasized in a given project depend on the park’s resource setting, status of resource stewardship planning and science in identifying high-priority indicators, and availability of data and expertise to assess current conditions for a variety of potential study resources and indicators. Although the primary objective of NRCAs is to report on current conditions relative to logical forms of reference conditions and values, NRCAs also report on trends, when appropriate (i.e., when the underlying data and methods support such reporting), as well as influences on resource conditions. These influences may include past activities or conditions that provide a helpful context for understanding current conditions and present-day threats and stressors that are best interpreted at park, watershed, or landscape scales (though NRCAs do not report on condition status for land areas and natural resources beyond park boundaries). Intensive cause-andeffect analyses of threats and stressors, and development of detailed treatment options, are outside the scope of NRCAs. It is also important to note that NRCAs do not address resources that lack sufficient data for assessment. For Mount Rainier National Park, this includes most invertebrate species and many other animal species that are subject to significant stressors from climate change and other anthropogenic sources such as air pollutants and recreational use. In addition, we did not include an analysis of the physical hydrology associated with streams (such as riverine landforms, erosion and aggradation which is significant in MORA streams), due to a loss of staff expertise from the USGS

  5. Additive manufacturing of metals

    International Nuclear Information System (INIS)

    Herzog, Dirk; Seyda, Vanessa; Wycisk, Eric; Emmelmann, Claus

    2016-01-01

    Additive Manufacturing (AM), the layer-by layer build-up of parts, has lately become an option for serial production. Today, several metallic materials including the important engineering materials steel, aluminium and titanium may be processed to full dense parts with outstanding properties. In this context, the present overview article describes the complex relationship between AM processes, microstructure and resulting properties for metals. It explains the fundamentals of Laser Beam Melting, Electron Beam Melting and Laser Metal Deposition, and introduces the commercially available materials for the different processes. Thereafter, typical microstructures for additively manufactured steel, aluminium and titanium are presented. Special attention is paid to AM specific grain structures, resulting from the complex thermal cycle and high cooling rates. The properties evolving as a consequence of the microstructure are elaborated under static and dynamic loading. According to these properties, typical applications are presented for the materials and methods for conclusion.

  6. Safety in a Manufacturing Company

    Directory of Open Access Journals (Sweden)

    Kopczewski Marian

    2017-02-01

    Full Text Available The safety systems include the functioning of the institutions of a state, central, and local government, businesses, and social organizations. Research in this discipline should contribute to the development of the theoretical foundations and systems of national and international security and operating systems in the area of technical safety. Technical safety engineering should deal with a design, build, operation, and decommissioning of technical measures in order to minimize the opportunities and the size of their negative impact on the environment, people, and the good of civilization. With this in mind, the main purpose of the research was to evaluate the safety of technical manufacturing company that uses a wide machine park. A plant manufacturing parts and components for automobiles was the audited company.

  7. Mathematical model of parking space unit for triangular parking area

    Science.gov (United States)

    Syahrini, Intan; Sundari, Teti; Iskandar, Taufiq; Halfiani, Vera; Munzir, Said; Ramli, Marwan

    2018-01-01

    Parking space unit (PSU) is an effective measure for the area size of a vehicle, including the free space and the width of the door opening of the vehicle (car). This article discusses a mathematical model for parking space of vehicles in triangular shape area. An optimization model for triangular parking lot is developed. Integer Linear Programming (ILP) method is used to determine the maximum number of the PSU. The triangular parking lot is in isosceles and equilateral triangles shape and implements four possible rows and five possible angles for each field. The vehicles which are considered are cars and motorcycles. The results show that the isosceles triangular parking area has 218 units of optimal PSU, which are 84 units of PSU for cars and 134 units of PSU for motorcycles. Equilateral triangular parking area has 688 units of optimal PSU, which are 175 units of PSU for cars and 513 units of PSU for motorcycles.

  8. Analysis of the second part of the fuel cycle of nuclear spanish park using module TREVOL of EVOLCODE2

    International Nuclear Information System (INIS)

    Merino Rodriguez, I.; Alvarez-Velarde, F.; Martin-Fuertes, F.

    2011-01-01

    This paper describes the application of the code TR E VOL an associated fuel cycle Spanish nuclear park, with the objective of estimating the mass of nuclear fuel manufactured by reactor and the mass generated of irradiated fuel.

  9. A Survey of Intelligent Car Parking System

    OpenAIRE

    Faheem; S.A. Mahmud; G.M. Khan; M. Rahman; H. Zafar

    2013-01-01

    The industrialization of the world, increase in population, slow paced city development and mismanagement of the available parking space has resulted in parking related problems. There is a dire need for a secure, intelligent, efficient and reliable system which can be used for searching the unoccupied parking facility, guidance towards the parking facility, negotiation of the parking fee, along with the proper management of the parking facility. Intelligent Parking Service is a part of Intel...

  10. parkITsmart: minimization of cruising for parking

    OpenAIRE

    Tsiaras, Christos; Hobi, Livio; Hofstetter, Fabian; Liniger, Samuel; Stiller, Burkhard

    2015-01-01

    Finding a parking space in urban areas is a daily challenge for drivers across the world, due to the increasing amount of vehicles and the limited amount of parking spaces. Drivers who are looking for a parking space in peak hours are often forced to drive around city blocks until they spot a free parking space. This process is termed in literature “cruising for parking” and is proven to (a) cost a lot of time and gas for drivers, (b) generate unnecessary traffic load, and (c) affect the envi...

  11. The today nuclear park

    International Nuclear Information System (INIS)

    Girard, Ph.; Marignac, Y.; Tassart, J.

    2000-03-01

    This economic analysis of the nuclear industry, takes stock on the french nuclear park, the nuclear materials flux, the operating and in construction from 1970 to 1998 reactors, the storage and the wastes reprocessing. The second part proposes many scenario in function of the reactors lifetime and the industrial policy of fuel reprocessing. This analysis shows the interest of extending the power plants lifetime and evaluates the consequences of a reprocessing-recycling policy facing the stop of such a policy in 2010. (A.L.B.)

  12. Automated Car Park Management System

    Science.gov (United States)

    Fabros, J. P.; Tabañag, D.; Espra, A.; Gerasta, O. J.

    2015-06-01

    This study aims to develop a prototype for an Automated Car Park Management System that will increase the quality of service of parking lots through the integration of a smart system that assists motorist in finding vacant parking lot. The research was based on implementing an operating system and a monitoring system for parking system without the use of manpower. This will include Parking Guidance and Information System concept which will efficiently assist motorists and ensures the safety of the vehicles and the valuables inside the vehicle. For monitoring, Optical Character Recognition was employed to monitor and put into list all the cars entering the parking area. All parking events in this system are visible via MATLAB GUI which contain time-in, time-out, time consumed information and also the lot number where the car parks. To put into reality, this system has a payment method, and it comes via a coin slot operation to control the exit gate. The Automated Car Park Management System was successfully built by utilizing microcontrollers specifically one PIC18f4550 and two PIC16F84s and one PIC16F628A.

  13. Orlice Nature Park - environmental themes

    International Nuclear Information System (INIS)

    Hanus, L.

    2002-01-01

    The aim of this abstract is to outline the main characteristics of Orlice Nature Park and of the procedure of Environmental Impact Assessment (EIA), and to evaluate public interest in the nature park and in nature protection in general. Orlice Nature Park was instituted in 1996. The function of the park is to protect the character of the area of landscape around the River Orlice. Orlice Natural Park covers an area of 115 sq. km. The main environmental risks to the park are: intensive agriculture, forest mono-culture, industry, transport, channel improvement, the building of holiday cottages, sport, and recreation. Among the conflicts of interest in the park are: nature protection, water management, building constrictions, business, fishery, water sports and recreation. During the process of Environmental Impact Assessment in Hradec Kralove, the public voiced its opinion against the building of a supermarket within the grounds of of the nature park. In this case the public showed its interest in the value of nature and landscape, the value of human health and the value of plant species. In general, the public and the local media show an interest in the park only in exceptional circumstances. (author)

  14. Livermore Big Trees Park Soil Survey

    International Nuclear Information System (INIS)

    McConachie, W.A.; Failor, R.A.

    1995-01-01

    Lawrence Livermore National Laboratory (LLNL) will sample and analyze soil in the Big Trees Park area in Livermore, California, to determine if the initial level of plutonium (Pu) in a soil sample taken by the U.S. Environmental Protection Agency (EPA) in September 1993 can be confirmed. Nineteen samples will be collected and analyzed: 4 in the area where the initial EPA sample was taken, 2 in the nearby Arroyo Seco, 12 in scattered uncovered soil areas in the park and nearby school, and 1 from the sandbox of a nearby apartment complex. Two quality control (QC) samples (field duplicates of the preceding samples) win also be collected and analyzed. This document briefly describes the purpose behind the sampling, the sampling rationale, and the methodology

  15. Parking Spoorzone Delft : Addressing expected parking challenges 2015-2017

    NARCIS (Netherlands)

    Piccot, C.; Groenendijk, L.; Rot, M.; Van der Meijs, P.; Rakers, T.; Negenborn, R.R.; Annema, J.A.; Pel, A.; Vleugel, J.

    2014-01-01

    This project is carried out on request of the BVOW, the interest group of the neighbourhoods Olofsbuurt and Westerkwartier in Delft, in order to propose solutions for the parking issue of Spoorzone Delft expected between 2015 and 2017. They are worried that parking disturbances will emerge in their

  16. Using game theory to improve safety within chemical industrial parks

    CERN Document Server

    Reniers, Genserik

    2013-01-01

    Though the game-theoretic approach has been vastly studied and utilized in relation to economics of industrial organizations, it has hardly been used to tackle safety management in multi-plant chemical industrial settings. Using Game Theory for Improving Safety within Chemical Industrial Parks presents an in-depth discussion of game-theoretic modelling which may be applied to improve cross-company prevention and -safety management in a chemical industrial park.   By systematically analyzing game-theoretic models and approaches in relation to managing safety in chemical industrial parks, Using Game Theory for Improving Safety within Chemical Industrial Parks explores the ways game theory can predict the outcome of complex strategic investment decision making processes involving several adjacent chemical plants. A number of game-theoretic decision models are discussed to provide strategic tools for decision-making situations.   Offering clear and straightforward explanations of methodologies, Using Game Theor...

  17. Parking taxes : evaluating options and impacts

    International Nuclear Information System (INIS)

    Litman, T.A.

    2006-01-01

    In addition to encouraging the use of alternative modes of transport, parking taxes can help to reduce congestion, air pollution, and urban sprawl. Various types of parking taxes were evaluated in this paper, as well as their impacts on parking supply, prices and travel patterns. Examples of various parking tax programs in major cities in Canada, Europe, the United States and Australia were presented. Parking tax programs were divided into 2 main categories: (1) per-space parking levies which distribute cost burdens and encourage property owners to manage parking supply more efficiently and (2) commercial parking taxes on parking rental transactions which discourage the pricing of parking and concentrate impacts in limited areas. Worksite parking levies were discussed, as well stormwater fees and employee parking as a taxable benefit. Typical parking facility financial costs were reviewed and best practices for structuring and implementing parking taxes to increase public acceptability were outlined. It was suggested that the tax base should be broad and well-defined. Local governments should increase parking prices to market rates before imposing special parking taxes, and taxes and fees should be structured to avoid undesirable land use. Parking tax reforms should be part of an overall parking and mobility management program. Stakeholders should be consulted to insure that regulations, administrative procedures and enforcement policies are efficient and fair. The establishment of an evaluation program to determine tax impacts on parking supply and pricing, economic activity, traffic and spillover problems was also recommended. 42 refs., 4 tabs., 1 fig

  18. California Community Colleges Parking Survey.

    Science.gov (United States)

    McIntyre, Chuck

    In 1990, a representative sample of 25 California community colleges was contacted by telephone to determine their parking policies and practices. The colleges were sampled on the basis of location and size. Study findings included the following: (1) 17 of the colleges reported that they had insufficient numbers of on-campus parking spaces; (2)…

  19. Smart parking management and navigation system

    KAUST Repository

    Saadeldin, Mohamed

    2017-01-01

    Various examples are provided for smart parking management, which can include navigation. In one example, a system includes a base station controller configured to: receive a wireless signal from a parking controller located at a parking space

  20. Manufactured volvulus.

    Science.gov (United States)

    Zweifel, Noemi; Meuli, Martin; Subotic, Ulrike; Moehrlen, Ueli; Mazzone, Luca; Arlettaz, Romaine

    2013-06-01

    Malrotation with a common mesentery is the classical pathology allowing midgut volvulus to occur. There are only a few reports of small bowel volvulus without malrotation or other pathology triggering volvulation. We describe three cases of small bowel volvulus in very premature newborns with a perfectly normal intra-abdominal anatomy and focus on the question, what might have set off volvulation. In 2005 to 2008, three patients developed small bowel volvulus without any underlying pathology. Retrospective patient chart review was performed with special focus on clinical presentation, preoperative management, intraoperative findings, and potential causative explanations. Mean follow-up period was 46 months. All patients were born between 27 and 31 weeks (mean 28 weeks) with a birth weight between 800 and 1,000 g (mean 887 g). They presented with an almost identical pattern of symptoms including sudden abdominal distension, abdominal tenderness, erythema of the abdominal wall, high gastric residuals, and radiographic signs of ileus. All of them were treated with intensive abdominal massage or pelvic rotation to improve bowel movement before becoming symptomatic. Properistaltic maneuvers including abdominal massage and pelvic rotation may cause what we term a "manufactured" volvulus in very premature newborns. Thus, this practice was stopped. Georg Thieme Verlag KG Stuttgart · New York.

  1. Statistical and Computational Techniques in Manufacturing

    CERN Document Server

    2012-01-01

    In recent years, interest in developing statistical and computational techniques for applied manufacturing engineering has been increased. Today, due to the great complexity of manufacturing engineering and the high number of parameters used, conventional approaches are no longer sufficient. Therefore, in manufacturing, statistical and computational techniques have achieved several applications, namely, modelling and simulation manufacturing processes, optimization manufacturing parameters, monitoring and control, computer-aided process planning, etc. The present book aims to provide recent information on statistical and computational techniques applied in manufacturing engineering. The content is suitable for final undergraduate engineering courses or as a subject on manufacturing at the postgraduate level. This book serves as a useful reference for academics, statistical and computational science researchers, mechanical, manufacturing and industrial engineers, and professionals in industries related to manu...

  2. CERN in the park

    CERN Multimedia

    2002-01-01

    CERN will be the centre of debate at a 'Café scientifique' on Monday 29 April. The aim of the Cafés scientifiques, which are organised by the association of Bancs Publics, is to kindle discussion between ordinary people and specialists in a scientific field. This Monday, Maurice Bourquin, President of the CERN Council, Hans Hoffmann, Director of Technology Transfer and Scientific Computing at CERN, Gilbert Guignard, a physicist at CERN, and Ruhal Floris, who teaches mathematical didactics at the University of Geneva, will explain the usefulness and contributions to science of the world's biggest laboratory for particle physics. What is CERN for? Monday 29 April at 18.30 Musée d'histoire des sciences, Geneva (in the park Perle du Lac) Entry free Wine and buffet after the discussion

  3. Yellowcake National Park

    International Nuclear Information System (INIS)

    Dagget, D.

    1985-01-01

    Exploration for and mining of uranium ore is going on within 10 miles of the Grand Canyon National Park. The current rush started in 1980, when a Denver-based company, Energy Fuels Nuclear, took over a claim in Hack Canyon and uncovered a very rich deposit of uranium ore. Recent explorations have resulted in some 1300 claims in the area around the Grand Canyon, many of them in the Arizona Strip, the land between the Canyon and Utah. The center of current controversy is the 1872 Mining Law. Replacement of the law with a leasing system similar to that used for leasable minerals such as coal, oil shale, oil and gas, potash, and phosphate is advocated. 1 figure

  4. The impact of fit manufacturing on green manufacturing: A review

    Science.gov (United States)

    Qi, Ang Nian; Sin, Tan Chan; Fathullah, M.; Lee, C. C.

    2017-09-01

    Fit manufacturing and Green manufacturing are a new trend principle and concept. They are getting popular in industrial. This paper is identifying the impact between Fit manufacturing and Green manufacturing. Besides Fit manufacturing, Lean manufacturing, Agile manufacturing and Sustainable manufacturing gives big impacts to Green Manufacturing. On top of that, this paper also discuss the benefits of applying Fit manufacturing and Green manufacturing in industrial as well as environment. Hence, applications of Fit manufacturing and Green Manufacturing are increasing year by year.

  5. Understanding parking habits at CERN

    CERN Multimedia

    Anaïs Schaeffer

    2016-01-01

    The SMB department is setting up a monitoring system in certain CERN car parks in order to evaluate their occupancy rates and subsequently make them easier to use.    Vehicle registration plate readers (red triangles) are now installed at the entrances and exits of the Le Cèdres car park (in orange) and of the Building 4 and 5 one (in blue). The 2 other car parks (Building 40 in violet and “high-voltage” in green) will be equipped at a later stage. Vehicle registration plate readers are now installed at the entrances and exits of the Les Cèdres car park and of the Building 4 and 5 car park, both on the Meyrin site. The information collected by these readers will allow the occupancy levels of these car parks to be analysed throughout the day, establishing periods of peak usage and the pattern of vehicle movements. “We have been experiencing parking problems at CERN for several years n...

  6. Aftermath of Griffith Park Fire

    Science.gov (United States)

    2007-01-01

    In mid-May 2007, wind-driven flames raced through Griffith Park in Los Angeles, forcing hasty evacuations and threatening numerous famous landmarks and tourist spots, such as the Los Angeles Zoo and the Hollywood Sign. Ultimately, no one was injured in the fire, which may have been started by a cigarette. About 800 acres burned in the urban park, which is itself a Hollywood landmark, having been the location for several movies, including Rebel Without A Cause. This image of the park was captured by the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) on NASA's Terra satellite on June 6, 2007, about a month after the fire. ASTER detects both visible and infrared wavelengths of light, and both kinds have been used to make this image. Vegetation appears in various shades of red, while the burned areas appear charcoal. Roads and dense urban areas appear purplish-gray or white. Water is dark blue. Large burned areas are evident in the northwest and southeast parts of the park, with scattered smaller patches along the southern margin. Some botanical gardens and parts of a bird sanctuary, as well as some park structures like restrooms, were destroyed. The park's unburned, natural vegetation appears brick red, while the irrigated golf courses adjacent to the park are bright red. NASA image created by Jesse Allen, using data provided courtesy of the NASA/GSFC/MITI/ERSDAC/JAROS, and U.S./Japan ASTER Science Team.

  7. Analysis of Parking Reliability Guidance of Urban Parking Variable Message Sign System

    OpenAIRE

    Zhenyu Mei; Ye Tian; Dongping Li

    2012-01-01

    Operators of parking guidance and information systems (PGIS) often encounter difficulty in determining when and how to provide reliable car park availability information to drivers. Reliability has become a key factor to ensure the benefits of urban PGIS. The present paper is the first to define the guiding parking reliability of urban parking variable message signs (VMSs). By analyzing the parking choice under guiding and optional parking lots, a guiding parking reliability model was constru...

  8. Advanced Manufacturing Technologies

    Science.gov (United States)

    Fikes, John

    2016-01-01

    Advanced Manufacturing Technologies (AMT) is developing and maturing innovative and advanced manufacturing technologies that will enable more capable and lower-cost spacecraft, launch vehicles and infrastructure to enable exploration missions. The technologies will utilize cutting edge materials and emerging capabilities including metallic processes, additive manufacturing, composites, and digital manufacturing. The AMT project supports the National Manufacturing Initiative involving collaboration with other government agencies.

  9. Governance assessment of a protected area : the case of the Alde Feanen National Park

    NARCIS (Netherlands)

    Lordkipanidze, Maia; Bressers, Hans; Lulofs, Kris

    2018-01-01

    This paper addresses the challenge of appropriate governance of complexity and diversity in the Dutch national park of Alde Feanen. The issue is how to enhance ecosystem resilience. Our focus relates to a navigable waterway within the park that affects the natural values of the area. The governance

  10. Influence of Parking Price on Parking Garage Users’ Behaviour

    Directory of Open Access Journals (Sweden)

    Jelena Simićević

    2012-09-01

    Full Text Available Parking charge is a powerful tool for solving parking and traffic congestion problems. In order to achieve the expected effects without any adverse impact it is necessary to understand well the users’ responses to this policy. This paper, based on a sample of interviewed parking garage users, has developed binary logit model for identification and quantification of characteristics of users and trips, on which the acceptance of parking price is dependent. In addition, multinomial logit model has been made in order to predict what the users will opt for when faced with an increase in parking price. For the first time the parameter “shorten duration” has been introduced which has shown to be the most significant in making behaviour-related decisions. The results show that the users with the purpose work are the most sensitive to an increase in parking charge, what can be deemed positive for policy makers. However, great sensitivity of the users with the purpose shopping should cause their concern. The results of the multinomial model show that they would not discontinue coming into the area after all.

  11. Child safety in parks' playgrounds (a case study in Tehran’s sub-district parks

    Directory of Open Access Journals (Sweden)

    A.H. Mirlouhi Falavarjani

    2010-10-01

    Full Text Available Background and aimsSafety is a complex concept and multidisciplinary science which is included some difference areas from industrial sectors to urban public arenas. Parks and playgrounds as important public places should be considered in terms of health and safety, especially for kids as prominent social vulnerable citizens. According to CPSC, 147 deaths havebeen reported for under 15 year old child during Jan 1990 to Aug 2000. Every 2.5 minute, kid suffers playground related accident. The main objective in this study is safety assessment ofplaygrounds among the selected parks.MethodsIn this case study, deductive approach and cross-sectional survey was followed, and some parks and playgrounds were selected among five urban counties in Tehran. Our volunteered samples were 160 parents. Playgrounds and related equipment were assessed in terms of safety, as well.ResultsOur findings show that more than 68% of playground equipment might create hazardous condition for kids. Lack of sustain maintenance for both of equipment and playground surface make some risky area for the mentioned group. Statistical analysis by SPSSWin 13 showed that more than 78 % of parents are worry about their child in terms of playground safetyproblems. Safety assessment of swings and slides showed that there are safety based problems in 89% of cases. Due to statistical reports of Tehran Emergency center, 10-12 and 8-10 year old kids suffer play based accident more than others. Reported traumas showed that face and skull and then feet suffered mechanical injury more than other limbs.ConclusionSurely, safety and health considerations are known as Municipality responsibilities, so for safety improvement in parks an integration safety system should be happened. HSE_MS seems a reliable approach for the mention goal. For improvement of exist parks and playground some related standard should be follows such as CPSC standards, EN 1176, and EN 1177. Also anthropometric data development

  12. Multinational underground nuclear parks

    Energy Technology Data Exchange (ETDEWEB)

    Myers, C.W. [Nuclear Engineering and Nonproliferation Division, Los Alamos National Laboratory, MS F650, Los Alamos, NM 87544 (United States); Giraud, K.M. [Wolf Creek Nuclear Operating Corporation, 1550 Oxen Lane NE, P.O. Box 411, Burlington, KS 66839-0411 (United States)

    2013-07-01

    Newcomer countries expected to develop new nuclear power programs by 2030 are being encouraged by the International Atomic Energy Agency to explore the use of shared facilities for spent fuel storage and geologic disposal. Multinational underground nuclear parks (M-UNPs) are an option for sharing such facilities. Newcomer countries with suitable bedrock conditions could volunteer to host M-UNPs. M-UNPs would include back-end fuel cycle facilities, in open or closed fuel cycle configurations, with sufficient capacity to enable M-UNP host countries to provide for-fee waste management services to partner countries, and to manage waste from the M-UNP power reactors. M-UNP potential advantages include: the option for decades of spent fuel storage; fuel-cycle policy flexibility; increased proliferation resistance; high margin of physical security against attack; and high margin of containment capability in the event of beyond-design-basis accidents, thereby reducing the risk of Fukushima-like radiological contamination of surface lands. A hypothetical M-UNP in crystalline rock with facilities for small modular reactors, spent fuel storage, reprocessing, and geologic disposal is described using a room-and-pillar reference-design cavern. Underground construction cost is judged tractable through use of modern excavation technology and careful site selection. (authors)

  13. Design and manufacturing of mechanical steering system for ...

    African Journals Online (AJOL)

    Design and manufacturing of mechanical steering system for parallel parking, zero turning radius, minimum turning radius with traditional turning. ... of the steering system are designed so as to meet all the configuration of steering system and to be well-matched to the power train, suspension system and body of the car.

  14. Tribology in Manufacturing Technology

    CERN Document Server

    2013-01-01

    The present book aims to provide research advances on tribology in manufacturing technology for modern industry. This book can be used as a research book for final undergraduate engineering course (for example, mechanical, manufacturing, materials, etc) or as a subject on manufacturing at the postgraduate level. Also, this book can serve as a useful reference for academics, manufacturing and tribology researchers, mechanical, mechanical, manufacturing and materials engineers, professionals in related industries with manufacturing and tribology.

  15. Architectural heritage or theme park

    Directory of Open Access Journals (Sweden)

    Ignasi Solà-Morales

    1998-04-01

    Full Text Available The growing parallelism between the perception and the consumer use of theme parks and architectural heritage gives rise to a reflection about the fact that the architectural object has been turned into a museum piece, stripped  of its original value and its initial cultural substance to become images exposed to multiple gazes, thus producing what the author calis the "Theme Park effect", with consequences on protected architecture.

  16. Manufacturing in the knowledge economy

    DEFF Research Database (Denmark)

    Hansen, Teis; Winther, Lars

    2015-01-01

    and export. However, the character and activities of these industries are profoundly changing as they become increasingly knowledge intensive. Thus, innovation processes and knowledge production in manufacturing are much more complex than suggested by the classic division into high-, medium-and low...

  17. Additively manufactured porous tantalum implants

    NARCIS (Netherlands)

    Wauthle, Ruben; Van Der Stok, Johan; Yavari, Saber Amin; Van Humbeeck, Jan; Kruth, Jean Pierre; Zadpoor, Amir Abbas; Weinans, Harrie; Mulier, Michiel; Schrooten, Jan

    2015-01-01

    The medical device industry's interest in open porous, metallic biomaterials has increased in response to additive manufacturing techniques enabling the production of complex shapes that cannot be produced with conventional techniques. Tantalum is an important metal for medical devices because of

  18. Exploring en-route parking type and parking-search route choice

    DEFF Research Database (Denmark)

    Kaplan, Sigal; Bekhor, Sholomo

    2011-01-01

    This paper describes the first phase of an on-going research investigating the joint choice of parking type, parking facility and cruising-for-parking route. The importance of this issue derives from the significant share of cruising-for-parking traffic in urban areas, the relevance of parking po...

  19. Analysis of flow coefficient in chair manufacture

    OpenAIRE

    Ivković Dragoljub; Živković Slaven

    2005-01-01

    The delivery on time is not possible without the good-quality planning of deadlines, i.e. planning of the manufacturing process duration. The study of flow coefficient enables the realistic forecasting of the manufacturing process duration. This paper points to the significance of the study of flow coefficient on scientific basis so as to determine the terms of the end of the manufacture of chairs made of sawn timber. Chairs are the products of complex construction, often almost completely ma...

  20. Training for successful lean manufacturing implementation

    OpenAIRE

    Ichimura, Maki; Jahankhani, Hamid; Arunachalam, Subramaniam

    2006-01-01

    Implementing lean manufacturing is a complex and everlasting task. The workers involving in production processes are the pivot of the lean manufacturing implementation. Training is known as a vehicle to assist the implementation process. Despite awareness of the training importance, so far, a little is available to assist to organise an efficient training. This paper summarises the overview of lean manufacturing and discuss the importance of human resource within lean implementation process. ...

  1. Public parks as urban tourism in Jakarta

    Science.gov (United States)

    Adiati, M. P.; Lestari, N. S.; Wiastuti, R. D.

    2018-03-01

    Sustainable urban tourism development should provide better places for people to live in and for people to visit. Jakarta as the capital city has a potential for its urban tourism. Thus, urban tourism attribute such as Public Park should be in high- quality to cope with the needs of urban people and outside visitors. The purpose of this study is to investigate Public Park attributes and to analyze its compliance refer to Public Park that eventually supports sustainable urban tourism. This paper used a qualitative approach. Primary data obtain from direct field observation in seven Public Parks in Jakarta; Menteng Park, Suropati Park, Situ Lembang Park, Ayodhya Park, Cattleya Park, Kodok Park, and Langsat Park. Observation checks list use as guidance. The result provides an assessment of Public Park based on four categories; the accessibility, park activities, safety, and user. The implication of this study offers recommendations to enhance Public Park so that it complies with good public park design- attributes and with the obligations of sustainable urban tourism in Jakarta.

  2. Parking management : strategies, evaluation and planning

    International Nuclear Information System (INIS)

    Litman, T.A.

    2006-01-01

    Parking facilities are a major cost to society. Current planning practices are based on the assumption that parking should be abundant and provided free, with costs borne indirectly. This report examined parking management strategies related to integrated parking plans. Problems with current parking planning practices were reviewed. The costs of parking facilities were examined, as well as the savings that can accrue from improved management techniques. Strategies included shared parking; remote parking and shuttle services; walking and cycling improvements; improved enforcement and control; and increasing the capacity of existing parking facilities. Parking pricing methods, financial incentives and parking tax reforms were reviewed. Issues concerning user information and marketing were examined. Overflow parking plans were evaluated. Three illustrative examples of parking management programs were outlined, along with details of implementation, planning and evaluation procedures. It was concluded that cost-effective parking management programs can often reduce parking requirements by 20 to 40 per cent compared with conventional planning requirements, in addition to providing economic, social and environmental benefits. 32 refs., 7 tabs., 3 figs

  3. Onion Park Research Natural Area: Botanical and ecological resources inventory, mapping and analysis with recommendations towards the development of a long-term monitoring and research program

    Science.gov (United States)

    Earle F. Layser

    1992-01-01

    Onion Park is a floristically rich naturally occurring mountain meadow and wetland complex which is surrounded by subalpine forest. The grass- and wetlands comprising the Park contribute biological diversity to an otherwise predominantly lodgepole pine-forested, subalpine setting. Onion Park is located at 7400' elevation in the Little Belt Mountains, five miles...

  4. Realization of parking task based on affine system modeling

    International Nuclear Information System (INIS)

    Kim, Young Woo; Narikiyo, Tatsuo

    2007-01-01

    This paper presents a motion control system of an unmanned vehicle, where parallel parking task is realized based on a self-organizing affine system modeling and a quadratic programming based robust controller. Because of non-linearity of the vehicle system and complexity of the task to realize, control objective is not always realized with a single algorithm or control mode. This paper presents a hybrid model for parallel parking task in which seven modes for describing sub-tasks constitute an entire model

  5. Improving aggregate behavior in parking lots with appropriate local maneuvers

    KAUST Repository

    Rodriguez, Samuel

    2013-11-01

    In this paper we study the ingress and egress of pedestrians and vehicles in a parking lot. We show how local maneuvers executed by agents permit them to create trajectories in constrained environments, and to resolve the deadlocks between them in mixed-flow scenarios. We utilize a roadmap-based approach which allows us to map complex environments and generate heuristic local paths that are feasible for both pedestrians and vehicles. Finally, we examine the effect that some agent-behavioral parameters have on parking lot ingress and egress. © 2013 IEEE.

  6. Introduction to semiconductor manufacturing technology

    CERN Document Server

    2012-01-01

    IC chip manufacturing processes, such as photolithography, etch, CVD, PVD, CMP, ion implantation, RTP, inspection, and metrology, are complex methods that draw upon many disciplines. [i]Introduction to Semiconductor Manufacturing Technologies, Second Edition[/i] thoroughly describes the complicated processes with minimal mathematics, chemistry, and physics; it covers advanced concepts while keeping the contents accessible to readers without advanced degrees. Designed as a textbook for college students, this book provides a realistic picture of the semiconductor industry and an in-depth discuss

  7. Japan's technology and manufacturing infrastructure

    Science.gov (United States)

    Boulton, William R.; Meieran, Eugene S.; Tummala, Rao R.

    1995-02-01

    The JTEC panel found that, after four decades of development in electronics and manufacturing technologies, Japanese electronics companies are leaders in the development, support, and management of complex, low-cost packaging and assembly technologies used in the production of a broad range of consumer electronics products. The electronics industry's suppliers provide basic materials and equipment required for electronic packaging applications. Panelists concluded that some Japanese firms could be leading U.S. competitors by as much as a decade in these areas. Japan's technology and manufacturing infrastructure is an integral part of its microelectronics industry's success.

  8. Manufacturing network evolution

    DEFF Research Database (Denmark)

    Yang, Cheng; Farooq, Sami; Johansen, John

    2011-01-01

    Purpose – This paper examines the effect of changes at the manufacturing plant level on other plants in the manufacturing network and also investigates the role of manufacturing plants on the evolution of a manufacturing network. Design/methodology/approach –The research questions are developed...... different manufacturing plants in the network and their impact on network transformation. Findings – The paper highlights the dominant role of manufacturing plants in the continuously changing shape of a manufacturing network. The paper demonstrates that a product or process change at one manufacturing...... by identifying the gaps in the reviewed literature. The paper is based on three case studies undertaken in Danish manufacturing companies to explore in detail their manufacturing plants and networks. The cases provide a sound basis for developing the research questions and explaining the interaction between...

  9. Smart parking management and navigation system

    KAUST Repository

    Saadeldin, Mohamed

    2017-11-09

    Various examples are provided for smart parking management, which can include navigation. In one example, a system includes a base station controller configured to: receive a wireless signal from a parking controller located at a parking space; determine a received signal strength indicator (RSSI) from the wireless signal; and identify a presence of a vehicle located at the parking space based at least in part on the RSSI. In another example, a method includes receiving a wireless signals from a base station controller and a parking controller located at a parking space; determining RSSIs from the wireless signals; and determining a location of the mobile computing device in a parking facility based at least in part on the RSSIs. In another example, a RSSI can be received, a parking occupancy can be determined using the RSSI, and an electronic record can be updated based on the parking occupancy.

  10. Learning from Millennium Park, Chicago

    Energy Technology Data Exchange (ETDEWEB)

    Guen, T. [American Society of Landscape Architects, Washington, DC (United States)]|[Terry Guen Design Associates, Chicago, IL (United States)

    2006-07-01

    This paper identified the value of creating green space for public use in an urban area in support of a sustainable environment. The inauguration of Chicago's Millennium Park in July 2004 marked a landmark civic achievement in greening an industrial urban centre. The Park was constructed on a 25-acre, previously vacant 100 year old rail property. In 2001, the first phase of the Park opened with the construction of the garages, train bridge, and infrastructure for future sculptural pieces. The green roof landscaping involved soil and drainage pathways, planting 11 acres of lawn and trees, and building a skating rink and restaurants. Phase 2 included new construction of donor enhancements. Among many benefits, this project stimulated investment in adjacent private development. This paper outlined the historic motivation for the park as a cultural and aesthetic benefit for the public. It reviewed the construction costs, the multiple sources of funding, and the multidisciplinary effort involving public agencies and private supporters. The landscape team included experts in soil, irrigation, planting, design and plant selection. Millennium Park has proven that current design and construction industries have the technical and physical ability to create cultural spaces of interest. 6 figs.

  11. Science parks as knowledge organizations

    DEFF Research Database (Denmark)

    Hansson, Finn

    gained agrowing importance in the new economy. If we shift focus to organizationtheory discussions on new knowledge and innovation has specialized in relationto the process of creation, managing, organizing, sharing, transferring etc. ofknowledge. The evaluation of science parks has to relate......Recent studies of the impact of science parks have questioned traditionalassumption about the effect of the parks on innovation and economic growth.Most studies tend to measure the effect by rather traditional measures, revenue,survival of new firms, without taking into account, that knowledge has...... to the changed role ofknowledge in the creation of economic growth. With the help of the concept ofthe ba from Nonanka, the article discuss if or how traditional organized scienceparks can become central actors in the new knowledge production or has to beviewed as an outdated institution from the industrial...

  12. Field guide to the geology of the Denali National Park Road and the Parks Highway from Cantwell to Healy

    Science.gov (United States)

    Hults, Chad P.; Capps, Danny L.; Brease, Phil F.

    2013-01-01

    The Denali National Park & Preserve area provides one of the few opportunities in Alaska for road-side access to good rock outcrops. The rocks and surficial deposits exposed in the Denali area span from the Paleozoic to the Quaternary. It is a structurally complex area that contains a history of rifting, accretion, and orogeny. There is evidence of multiple metamorphic events in the Mesozoic, mountain building in the Tertiary, and faulting in the present day. The region is the site of active faulting along one of the largest intra-continental fault systems, the Denali Fault system, which was the locus of a 7.9 M earthquake in 2002. This guidebook describes the key outcrops viewable along the Denali Park Road from the entrance to the Eielson Visitor Center, and along the Parks Highway from Healy to Cantwell.

  13. Smart parking management system with decal electronics system

    KAUST Repository

    Hussain, Muhammad Mustafa; Wicaksono, Irmandy

    2017-01-01

    Various examples are related to parking management, including identifying and reserving empty parking spaces. In one example, a smart parking space system includes a parking controller located at a parking space. The parking controller can identify a vehicle located at the parking space via an input sensor or a transceiver that initiates wireless communication with an electronic tag associated with the vehicle; and communicate a parking vacancy associated with the parking space to a remote computing device based at least in part on the identification of the vehicle. In another example, a computing device can receive parking vacancy data associated with a parking space from a parking controller; determine a parking vacancy associated with the parking space using the parking vacancy data; and encode for display on a client device a network page that includes an indication of the parking vacancy associated with the parking space.

  14. Smart parking management system with decal electronics system

    KAUST Repository

    Hussain, Muhammad Mustafa

    2017-09-21

    Various examples are related to parking management, including identifying and reserving empty parking spaces. In one example, a smart parking space system includes a parking controller located at a parking space. The parking controller can identify a vehicle located at the parking space via an input sensor or a transceiver that initiates wireless communication with an electronic tag associated with the vehicle; and communicate a parking vacancy associated with the parking space to a remote computing device based at least in part on the identification of the vehicle. In another example, a computing device can receive parking vacancy data associated with a parking space from a parking controller; determine a parking vacancy associated with the parking space using the parking vacancy data; and encode for display on a client device a network page that includes an indication of the parking vacancy associated with the parking space.

  15. 3D Ceramic Microfluidic Device Manufacturing

    International Nuclear Information System (INIS)

    Natarajan, Govindarajan; Humenik, James N

    2006-01-01

    Today, semiconductor processing serves as the backbone for the bulk of micromachined devices. Precision lithography and etching technology used in the semiconductor industry are also leveraged by alternate techniques like electroforming and molding. The nature of such processing is complex, limited and expensive for any manufacturing foundry. This paper details the technology elements developed to manufacture cost effective and versatile microfluidic devices for applications ranging from medical diagnostics to characterization of bioassays. Two applications using multilayer ceramic technology to manufacture complex 3D microfluidic devices are discussed

  16. Perceived Health Benefits and Willingness to Pay for Parks by Park Users: Quantitative and Qualitative Research

    Directory of Open Access Journals (Sweden)

    Claire Henderson-Wilson

    2017-05-01

    Full Text Available Whilst a growing body of evidence demonstrates people derive a range of health and wellbeing benefits from visiting parks, only a limited number of attempts have been made to provide a complementary economic assessment of parks. The aim of this exploratory study was to directly estimate the perceived health and wellbeing benefits attained from parks and the economic value assigned to parks by park users in Victoria, Australia. The research employed a mixed methods approach (survey and interviews to collect primary data from a selection of 140 park users: 100 from two metropolitan parks in Melbourne and 40 from a park on the urban fringe of Melbourne, Victoria. Our findings suggest that park users derive a range of perceived physical, mental/spiritual, and social health benefits, but park use was predominantly associated with physical health benefits. Overall, our exploratory study findings suggest that park users are willing to pay for parks, as they highly value them as places for exercising, socialising, and relaxing. Importantly, most people would miss parks if they did not exist. The findings aim to provide park managers, public health advocates, and urban policy makers with evidence about the perceived health and wellbeing benefits of park usage and the economic value park visitors place on parks.

  17. Acylinder and freeform optical manufacturing

    Science.gov (United States)

    Fess, Edward; Wolfs, Frank; DeFisher, Scott; Ross, James

    2015-10-01

    Aspheric cylinders have the ability to improve optical performance over standard cylindrical surfaces. Over the last several years there has also been development into the application and functionality of utilizing freeform surfaces to improve optical performance. Freeforms have the ability to not only improve image quality over a greater field of view, but can open up the design space of an optical system making it more compact. Freeform geometries, much like aspheric cylinders, may not have an axis of rotation to spin the optic about during manufacturing. This leads to costly fabrication processes and custom metrology set ups, which may inhibit their use. Over the last several years, OptiPro Systems has developed and optimized our eSX grinding, UFF and USF polishing, UltraSurf metrology, and ProSurf software programming technologies to make the processing of these complex geometries much easier and deterministic. In this paper we will discuss the challenges associated with manufacturing complex shapes like aspheric cylinders as well as freeform geometries, and how several technologies working together can overcome them. The technologies focus on metrology feedback to a grinding and polishing machine that is controlled through an iterative computer aided manufacturing software system. We will also present examples of these hard to manufacture shapes with results.

  18. San Francisco SFpark and parking information systems.

    Science.gov (United States)

    2011-01-01

    SFpark is a demonstration of a new approach to parking management that : will evaluate the effectiveness of demand-responsive pricing and real-time : information on parking availability for reducing congestion and greenhouse gas : emissions and provi...

  19. Utility of Big Area Additive Manufacturing (BAAM) For The Rapid Manufacture of Customized Electric Vehicles

    Energy Technology Data Exchange (ETDEWEB)

    Love, Lonnie J [ORNL

    2015-08-01

    This Oak Ridge National Laboratory (ORNL) Manufacturing Development Facility (MDF) technical collaboration project was conducted in two phases as a CRADA with Local Motors Inc. Phase 1 was previously reported as Advanced Manufacturing of Complex Cyber Mechanical Devices through Community Engagement and Micro-manufacturing and demonstrated the integration of components onto a prototype body part for a vehicle. Phase 2 was reported as Utility of Big Area Additive Manufacturing (BAAM) for the Rapid Manufacture of Customized Electric Vehicles and demonstrated the high profile live printing of an all-electric vehicle using ONRL s Big Area Additive Manufacturing (BAAM) technology. This demonstration generated considerable national attention and successfully demonstrated the capabilities of the BAAM system as developed by ORNL and Cincinnati, Inc. and the feasibility of additive manufacturing of a full scale electric vehicle as envisioned by the CRADA partner Local Motors, Inc.

  20. All-Embracing Manufacturing Roadmap System

    CERN Document Server

    Halevi, Gideon

    2012-01-01

    All-embracing manufacturing is a system that aims to dissolve the complexity of the manufacturing process and restore the inherent simplicity. It claims that production is very simple and flexible by nature. However, the complexity is a result of the production system approach which makes it rigid and therefore complex. All-embracing manufacturing introduces flexibility to production planning, it eliminates constraints, bottlenecks, and disruptions automatically while it restores the simplicity. No decision is made ahead of time, but only at the time of execution. It introduces technology as dominant part of manufacturing. It is a computer oriented system that imitates human behavior i.e. practically as any of us behave in daily personal life.

  1. Protect Czech park from development

    Czech Academy of Sciences Publication Activity Database

    Kindlmann, Pavel; Křenová, Zdeňka

    2016-01-01

    Roč. 531, č. 7595 (2016), s. 448-448 ISSN 0028-0836 Institutional support: RVO:86652079 Keywords : Protect Czech park Subject RIV: EH - Ecology, Behaviour OBOR OECD: Environmental sci ences (social aspects to be 5.7) Impact factor: 40.137, year: 2016

  2. Renovated Parks Improve Physical Activity

    Centers for Disease Control (CDC) Podcasts

    We know that children who are physically active every day are less likely to develop chronic diseases as adults, including obesity. Dr. Sandy Slater, a researcher with the University of Illinois, Chicago Prevention Research Center, discusses how a park improvement project in Chicago helped engage communities to improve areas for play and activity.

  3. 'Shockley park' stirs racism row

    Science.gov (United States)

    Gwynne, Peter

    2009-07-01

    A local authority in Northern California has encountered unexpected resistance to its decision to name a park after the Nobel-prize-winning physicist William Shockley, with a coalition of churches and civic groups preparing to petition against the name at a meeting scheduled for 23 July.

  4. Seremban Urban Park, Malaysia: a Preference Study

    OpenAIRE

    Maulan, Suhardi

    2002-01-01

    Unlike the West, where many studies have explored how peopleâ s needs are fulfilled by urban parks, Malaysia has received very little attention from researchers. One reason for this is the fact that Malaysia has only a short public park tradition. Although folk art and stories have chronicled a long history of gardens and other parks, these spaces were only accessible to royal family members and autocrats. In Malaysia, the concept of free public parks is relatively recent, having been introd...

  5. PLC Based Automatic Multistoried Car Parking System

    OpenAIRE

    Swanand S .Vaze; Rohan S. Mithari

    2014-01-01

    This project work presents the study and design of PLC based Automatic Multistoried Car Parking System. Multistoried car parking is an arrangement which is used to park a large number of vehicles in least possible place. For making this arrangement in a real plan very high technological instruments are required. In this project a prototype of such a model is made. This prototype model is made for accommodating twelve cars at a time. Availability of the space for parking is detecte...

  6. Evaluating urban parking policies with agent-based model of driver parking behavior

    NARCIS (Netherlands)

    Martens, C.J.C.M.; Benenson, I.

    2008-01-01

    This paper presents an explicit agent-based model of parking search in a city. In the model, “drivers” drive toward their destination, search for parking, park, remain at the parking place, and leave. The city’s infrastructure is represented by a high-resolution geographic information system (GIS)

  7. The on-street parking premium and car drivers' choice between street and garage parking

    NARCIS (Netherlands)

    Kobus, M.B.W.; Gutierrez Puigarnau, E.; Rietveld, P.; van Ommeren, J.N.

    2013-01-01

    We introduce a methodology to estimate the effect of parking prices on car drivers' choice between street and garage parking. Our key identifying assumption is that the marginal benefit of parking duration does not depend on this choice. The endogeneity of parking duration is acknowledged in the

  8. Appraising manufacturing location

    NARCIS (Netherlands)

    Steenhuis, H.J.; de Bruijn, E.J.

    2002-01-01

    International location of manufacturing activities is an issue for managers of manufacturing companies as well as public policy makers. For managers, the issue is relevant because international locations offer opportunities for lowering costs due to productivity improvements. For governments the

  9. Manufacturing engineering and technology

    CERN Document Server

    Kalpakjian, Serope; Vijai Sekar, K S

    2014-01-01

    For courses in manufacturing processes at two- or four-year schools. An up-to-date text that provides a solid background in manufacturing processes. Manufacturing Engineering and Technology, SI Edition, 7e, presents a mostly qualitative description of the science, technology, and practice of manufacturing. This includes detailed descriptions of manufacturing processes and the manufacturing enterprise that will help introduce students to important concepts. With a total of 120 examples and case studies, up-to-date and comprehensive coverage of all topics, and superior two-color graphics, this text provides a solid background for manufacturing students and serves as a valuable reference text for professionals. Teaching and Learning Experience To provide a better teaching and learning experience, for both instructors and students, this program will: * Apply Theory and/or Research: An excellent overview of manufacturing conceptswith a balance of relevant fundamentals and real-world practices. * Engage Students: E...

  10. What's Ahead for our National Parks?

    Science.gov (United States)

    George, Jean Craighead

    1972-01-01

    To insure the future of our National Parks, sweeping changes must be made. Encroaching civilization at the expense of nature has forced National Park officials to consider alternatives to future development - limiting number of visitors, facilities outside the parks and curtailing vehicular traffic. (BL)

  11. SmartPark Technology Demonstration Project

    Science.gov (United States)

    2013-11-01

    The purpose of FMCSAs SmartPark initiative is to determine the feasibility of a technology for providing truck parking space availability in real time to truckers on the road. SmartPark consists of two phases. Phase I was a field operational test ...

  12. 32 CFR 634.31 - Parking.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 4 2010-07-01 2010-07-01 true Parking. 634.31 Section 634.31 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY (CONTINUED) LAW ENFORCEMENT AND CRIMINAL INVESTIGATIONS MOTOR VEHICLE TRAFFIC SUPERVISION Traffic Supervision § 634.31 Parking. (a) The most efficient use of existing on- and off-street parking...

  13. Additive Manufacturing a Liquid Hydrogen Rocket Engine

    Science.gov (United States)

    Jones, Carl P.; Robertson, Elizabeth H.; Koelbl, Mary Beth; Singer, Chris

    2016-01-01

    Space Propulsion is a 5 day event being held from 2nd May to the 6th May 2016 at the Rome Marriott Park Hotel in Rome, Italy. This event showcases products like Propulsion sub-systems and components, Production and manufacturing issues, Liquid, Solid, Hybrid and Air-breathing Propulsion Systems for Launcher and Upper Stages, Overview of current programmes, AIV issues and tools, Flight testing and experience, Technology building blocks for Future Space Transportation Propulsion Systems : Launchers, Exploration platforms & Space Tourism, Green Propulsion for Space Transportation, New propellants, Rocket propulsion & global environment, Cost related aspects of Space Transportation propulsion, Modelling, Pressure-Thrust oscillations issues, Impact of new requirements and regulations on design etc. in the Automotive, Manufacturing, Fabrication, Repair & Maintenance industries.

  14. Additive Manufacturing Infrared Inspection

    Science.gov (United States)

    Gaddy, Darrell; Nettles, Mindy

    2015-01-01

    The Additive Manufacturing Infrared Inspection Task started the development of a real-time dimensional inspection technique and digital quality record for the additive manufacturing process using infrared camera imaging and processing techniques. This project will benefit additive manufacturing by providing real-time inspection of internal geometry that is not currently possible and reduce the time and cost of additive manufactured parts with automated real-time dimensional inspections which deletes post-production inspections.

  15. Smart Parking Management Field Test: A Bay Area Rapid Transit (BART) District Parking Demonstration

    OpenAIRE

    Shaheen, Susan

    2005-01-01

    In almost every major city in the U.S. and internationally, parking problems are ubiquitous. It is well known that the limited availability of parking contributes to roadway congestion, air pollution, and driver frustration and that the cost of expanding traditional parking capacity is frequently prohibitive. However, less research has addressed the effect of insufficient parking at transit stations on transit use. In the San Francisco Bay Area, parking has recently been at or near capacity a...

  16. 36 CFR 7.25 - Hawaii Volcanoes National Park.

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false Hawaii Volcanoes National Park. 7.25 Section 7.25 Parks, Forests, and Public Property NATIONAL PARK SERVICE, DEPARTMENT OF THE INTERIOR SPECIAL REGULATIONS, AREAS OF THE NATIONAL PARK SYSTEM § 7.25 Hawaii Volcanoes National Park. (a...

  17. Implementation of ergonomics in the management of parking increasing the quality of living parking park in mall Robinson Denpasar city

    Science.gov (United States)

    Sutapa, I. K.; Sudiarsa, I. M.

    2018-01-01

    The problems that often arise in the area of Denpasar City mostly caused by parking problems at the centers of activities such as shopping centers. The problems that occur not only because of the large number of vehicles that parked but also the result of the condition of parking officers who have not received attention, there is no concern about the physical condition of parking attendants because doing night guard duty. To improve the quality of parking officer, ergonomic parking lot is improved through the application of appropriate technology with systemic, holistic, interdisciplinary and participatory approach. The general objective of the research is to know the implementation of ergonomics in parking management on the improvement of the quality of parking officer in Robinson shopping center. The indicator of the quality of the parking officer work is the decrease of musculoskeletal complaints, fatigue, workload, boredom and increasing work motivation. The study was conducted using the same subject design, involving 10 subjects as a simple random sample. Intervention is done by arrangement of ergonomic basement motorcycle parking. Measurements done before and after repair. Washing out (WO) for 14 days. The data obtained were analyzed descriptively, tested normality (shapirowilk) and homogeneity (Levene Test). For normal and homogeneous distribution data, different test with One Way Anova, different test between Period with Post Hoc. Normally distributed and non-homogeneous data, different test with Friedman Test, different test between periods using Wilcoxon test. Data were analyzed with significance level of 5%. The results showed that the implementation of ergonomic in the management of parking area of the court decreased musculoskeletal complaints by 15.10% (p management of the parking lot improves the quality of the parking officer work from: (1) decrease of musculoskeletal complaints, (2) decrease of melting rate, (3) decrease of parking workload

  18. Terror Park: A future theme park in 2100

    OpenAIRE

    Wright, Daniel

    2017-01-01

    In the future, tourism and entertainment could be displayed as spectacles of horror, where consumers are offered and opportunity to revisit the tragedies of the past. Current displays of death where the past is exhibited and consumed as fun, scary and as entertainment productions are widespread. The movie industry provides horror to all ages, children can be exposed to the goulash past in various forms, such as the popular book series ‘Horrible Histories’. Theme parks, rides and roller-coaste...

  19. Rural Latino youth park use: characteristics, park amenities, and physical activity.

    Science.gov (United States)

    Perry, Cynthia K; Saelens, Brain E; Thompson, Beti

    2011-06-01

    Less than half of youth engage in sufficient physical activity to achieve health benefits. Key environmental factors of park and recreation spaces may influence youth physical activity. We sought to ascertain youth characteristics and behaviors that attract youth to parks with specific amenities and encourage physical activity while at the parks in a rural, predominantly Latino community. We examined the quality of amenities in the 13 parks and recreation spaces that middle school aged youth have access to in their community using the Environmental Assessment of Parks and Recreation Spaces (EAPRS) tool. Middle school students completed surveys in the school classroom (n = 1,102) regarding park use, physical activity, and intrapersonal characteristics (e.g., motivators). We used logistic regression to identify correlates of any park use, use of higher quality field and court parks, and active and sedentary park use. Younger age, participation in an after school activity, and identification of a team as a motivator were positively associated with any park use. Use of higher quality court and field parks was associated with participation in an after school activity and being Latino. The odds of being active in the parks were greater for boys and Latinos. Older age and alcohol use are correlated with being sedentary at the park, while odds of being sedentary at the park were lower for boys and youth who met physical activity guidelines. Organized team activities may encourage active use of higher quality fields and courts parks by Latino youth; thereby, increasing their level of physical activity.

  20. ACE - Manufacturer Identification Code (MID)

    Data.gov (United States)

    Department of Homeland Security — The ACE Manufacturer Identification Code (MID) application is used to track and control identifications codes for manufacturers. A manufacturer is identified on an...

  1. Changing perspectives in urban park management

    DEFF Research Database (Denmark)

    Chan, Chung-shing; Marafa, Lawal M.; Konijnendijk, Cecil Cornelis

    2015-01-01

    managers in Hong Kong have encountered different challenges over time, and the quest for changing park managerial strategies. In 2004, a set of indicators for urban park management in Hong Kong was produced as part of a Master's research. Local park managers were asked about their views on the respective......Urban parks provide numerous benefits to our society. In densely populated metropolises such as Hong Kong, urban parks are in high demand. A variety of indicators can be used as tools for improving park planning and management. Facing a dynamic society and increasing user expectations, urban park...... importance and performance (I–P) of the indicators. In 2012, a follow-up questionnaire survey was conducted with the managers to study if their views regarding these indicators and their performance had changed. Results from the 2004 and 2012 surveys revealed changing perceptions regarding both I...

  2. Topological Structure of Manipulators Used in Amusement Parks

    Directory of Open Access Journals (Sweden)

    Liviu Marian Ungureanu

    2014-06-01

    Full Text Available This paper focuses on the mobility analysis of spatial and planar manipulators used in amusement parks. In this paper is presented a topological structure analysis for many types of serial and parallel manipulators, referring to the calculation of mobility (degree of freedom of these types of complex mechanisms. It is used a new formula to calculate the mobility according to the number of drivelines, which are considered having identical operations.

  3. Museums as Theme Parks - A Possible Marketing Approach?

    OpenAIRE

    Alexandra ZBUCHEA

    2015-01-01

    Museums compete increasingly more with very diverse entertainment providers, such as theme parks, despite the fact that their offer is mainly cultural. Museums have had to be more active and they have had to diversify their offer, in order to be more popular, therefore to better achieve their complex cultural missions. They should be more “market oriented” and aim to develop their programs according with their visitors’ needs and desires, as well as with the evolutions in the contemporary soc...

  4. A Process Management System for Networked Manufacturing

    Science.gov (United States)

    Liu, Tingting; Wang, Huifen; Liu, Linyan

    With the development of computer, communication and network, networked manufacturing has become one of the main manufacturing paradigms in the 21st century. Under the networked manufacturing environment, there exist a large number of cooperative tasks susceptible to alterations, conflicts caused by resources and problems of cost and quality. This increases the complexity of administration. Process management is a technology used to design, enact, control, and analyze networked manufacturing processes. It supports efficient execution, effective management, conflict resolution, cost containment and quality control. In this paper we propose an integrated process management system for networked manufacturing. Requirements of process management are analyzed and architecture of the system is presented. And a process model considering process cost and quality is developed. Finally a case study is provided to explain how the system runs efficiently.

  5. Lake Turkana National Parks Kenya.

    OpenAIRE

    2005-01-01

    Lake Turkana is the largest, most northerly and most saline of Africa's Rift Valley lakes and an outstanding laboratory for the study of plant and animal communities. The three National Parks are a stopover for migrant waterfowl and are major breeding grounds for the Nile crocodile and hippopotamus. The Koobi Fora deposits are rich in pre-human, mammalian, molluscan and other fossil remains and have contributed more to the understanding of Quaternary palaeoenvironments than any other site on ...

  6. Sovremennoje iskusstvo v angliskom parke

    Index Scriptorium Estoniae

    2003-01-01

    Performance-kunsti rühmituse Virus (Alan Holligan, Stewart Bennett ja Ewan Robertson Edinburghist) projekt "Sekkumine - kaasaegne kunst inglise pargis" toimub Väliskunsti muuseumis, Mikkeli muuseumis ja selle ümbruses. Inspiratsiooniks on Kadrioru park ning parginäitused Mikkeli ja Väliskunsti muuseumis. Radical Loyalty projektist, millele pani aluse Chris Evans (Glasgow) 2002. a. ja mille raames plaanitakse skulptuuripargi rajamist Järvakandisse. Evansi projekt presentatsiooni formaadis toimub Mikkeli muuseumis video ja fotode abil

  7. Feasibility of Wind Energy Parks

    International Nuclear Information System (INIS)

    Villar, Jose

    2000-01-01

    The paper discuss the feasibility of wind energy parks including aspects of supply and demand of energy, costs of generation and risks of investment associated. The paper introduce to the situation of wind energy in the word and specifically in Spain, describes the legal framework in promotion of renewables in Spain, the analysis of revenues and the risk of this business in the european market

  8. Sustainability Characterization for Additive Manufacturing.

    Science.gov (United States)

    Mani, Mahesh; Lyons, Kevin W; Gupta, S K

    2014-01-01

    Additive manufacturing (AM) has the potential to create geometrically complex parts that require a high degree of customization, using less material and producing less waste. Recent studies have shown that AM can be an economically viable option for use by the industry, yet there are some inherent challenges associated with AM for wider acceptance. The lack of standards in AM impedes its use for parts production since industries primarily depend on established standards in processes and material selection to ensure the consistency and quality. Inability to compare AM performance against traditional manufacturing methods can be a barrier for implementing AM processes. AM process sustainability has become a driver due to growing environmental concerns for manufacturing. This has reinforced the importance to understand and characterize AM processes for sustainability. Process characterization for sustainability will help close the gaps for comparing AM performance to traditional manufacturing methods. Based on a literature review, this paper first examines the potential environmental impacts of AM. A methodology for sustainability characterization of AM is then proposed to serve as a resource for the community to benchmark AM processes for sustainability. Next, research perspectives are discussed along with relevant standardization efforts.

  9. Microstructural evolution of the LENS manufactured TiAl structure

    CSIR Research Space (South Africa)

    Lengopeng, T

    2016-11-01

    Full Text Available The advent of additive manufacturing presented the new-era where complex structures can be prototype and rapidly manufactured from a computer aided device file. Robust industries such as the aerospace and medicinal require 3D printed complex...

  10. Material Database for Additive Manufacturing Techniques

    Science.gov (United States)

    2017-12-01

    components in the field. II. BACKGROUND Additive manufacturing is a rapidly maturing process by which digital 3-D design data are used to build up...improves readiness by offering on-demand low-rate production [8, 9]. 3-D printing also enables rapid design iterations and complexity, which improve...abundant in additive manufacturing , allowing design freedom that is only limited by the material strength requirements. A set of eight conductive

  11. Organizational Culture and the Financial Performance of Manufacturing Firms

    OpenAIRE

    Mahrooz Koochaki Golafzani; Ebrahim Chirani

    2016-01-01

    This paper intends to examine the relationship between organizational culture and the financial performance of manufacturing firms in the province of Guilan (Iran). To do so, a statistical sample with the size of 247 firms located at industrial towns/parks in Guilan was selected. The required data was collected through questionnaire. Then, the relationship between organization culture, including the clan culture, adhocracy culture, market culture and hierarchy culture, and the financial perfo...

  12. Configuration study of large wind parks

    Energy Technology Data Exchange (ETDEWEB)

    Lundberg, Stefan

    2003-07-01

    In this thesis, layouts of various large-scale wind parks, using both AC as well as DC, are investigated. Loss modelling of the wind park components as well as calculations of the energy capture of the turbines using various electrical systems are performed, and the energy production cost of the various park configurations is determined. The most interesting candidate for a DC transmission based wind park was investigated more in detail, the series DC wind park. Finally, the power quality impact in the PCC (point of common coupling) was studied. It was found that from an energy capture point of view, the difference in energy production between various wind turbine systems is very small. Of all the investigated wind park configurations, the wind park with the series connected DC wind turbines seems to have the best potential to give the lowest energy production cost, if the transmission distance is longer then 10-20 km. Regarding the series DC wind park it was found that it is the most difficult one to control. However, a control algorithm for the series park and its turbines was derived and successfully tested. Still, several more details regarding the control of the series wind park has to be dealt with.

  13. Sense of Place and the National Parks, Strategies for Communicating the Interconnected Nature of Earth Science

    Science.gov (United States)

    Vye, E. C.; Rose, W. I.; Huntoon, J. E.; Nash, B. L.

    2010-12-01

    Using sense of place can help scientists improve their communication of complex concepts related to the connectivity of the environment, geological processes, and human societies. National parks afford excellent examples of places that contain intellectual and emotional stimuli for diverse individuals - in other words, they foster a sense of place. Parks contain spectacular examples of how the processes that shape the earth influence ecosystem and societal development. Parks can therefore be used as outdoor classrooms to engage people in place-based Earth Science education. Incorporating place-based teaching methods can promote learning about Earth’s processes that ensures that a wider audience can be reached than by traditional instructional methods. Specific examples of using national parks on the Colorado Plateau, in the Rocky Mountains and the Keweenaw Peninsula for K-12 teacher training have resulted in a deepening of Earth Science content-area knowledge. The National Parks “Views of the National Park (Views)” multimedia education program can subsequently be used to promote engagement of students in the teachers’ classrooms. Teachers who wish to continue their education as interns in the parks are served by programs such as Geoscientists-in-the-Parks, Volunteers-in-Parks, and Teacher-Ranger-Teacher programs. The Michigan Teaching Excellence Program (MiTEP), multi-year teacher leadership and professional development program is working with middle-grade science teachers from selected urban districts and using the parks of the Midwest as natural classrooms. MiTEP has partnered with the NPS to develop internship opportunities for teachers in the parks. These internships will result in educational materials that can be hosted by “Views”. The goal of the internships are to improve teachers’ understanding of the natural environment and the processes that it reflects, and to assist park personnel in producing materials that are standards-based, age

  14. Measuring Manufacturing Innovativeness

    DEFF Research Database (Denmark)

    Blichfeldt, Henrik; Knudsen, Mette Præst

    2017-01-01

    Globalization and customization increases the pressure on manufacturing companies, and the ability to provide innovativeness is a potential source of competitive advantage. This paper positions the manufacturing entity in the innovation process, and investigates the relation between innovation vers...... technology and organizational concepts. Based on Danish survey data from the European Manufacturing Survey (EMS-2015) this paper finds that there is a relation between innovative companies, and their level of technology and use of organizational concepts. Technology and organizational concepts act...... as manufacturing levers to support the manufacturing and production system to provide innovativeness. The managerial implication lies in building manufacturing capabilities to support the innovative process, by standardization, optimization and creating stability in combination with automation and advanced...

  15. Manufacturing ontology through templates

    Directory of Open Access Journals (Sweden)

    Diciuc Vlad

    2017-01-01

    Full Text Available The manufacturing industry contains a high volume of knowhow and of high value, much of it being held by key persons in the company. The passing of this know-how is the basis of manufacturing ontology. Among other methods like advanced filtering and algorithm based decision making, one way of handling the manufacturing ontology is via templates. The current paper tackles this approach and highlights the advantages concluding with some recommendations.

  16. Manufacturing knowledge management strategy

    OpenAIRE

    Shaw , Duncan; Edwards , John

    2006-01-01

    Abstract The study sought to understand the components of knowledge management strategy from the perspective of staff in UK manufacturing organisations. To analyse this topic we took an empirical approach and collaborated with two manufacturing organisations. Our main finding centres on the key components of a knowledge management strategy, and the relationships between it and manufacturing strategy and corporate strategy. Other findings include: the nature of knowledge in manufact...

  17. Decision making in the manufacturing environment using graph theory and fuzzy multiple attribute decision making methods

    CERN Document Server

    Rao, Ravipudi Venkata

    2007-01-01

    Manufacturing is the backbone of any industrialized nation. Recent worldwide advances in manufacturing technologies have brought about a metamorphism in the industry. Fast-changing technologies on the product front have created a need for an equally fast response from manufacturing industries. To meet these challenges, manufacturing industries have to select appropriate manufacturing strategies, product designs, manufacturing processes, work piece and tool materials, and machinery and equipment. The selection decisions are complex as decision making is more challenging today. Decision makers i

  18. Industrial & Manufacturing Engineering | Classification | College of

    Science.gov (United States)

    Electrical Engineering Instructional Laboratories Student Resources Industrial & Manufacturing Engineering Industrial & Manufacturing Engineering Academic Programs Industrial & Manufacturing Engineering Major Industrial & Manufacturing Engineering Minor Industrial & Manufacturing Engineering

  19. Strategic Roles of Manufacturing

    DEFF Research Database (Denmark)

    Yang, Cheng

    with the trend of globalisation, how do industrial companies develop their global manufacturing networks? These two questions are actually interlinked. On the one hand, facing increasing offshoring and outsourcing of production activities, industrial companies have to understand how to develop their global...... manufacturing networks. On the other hand, ongoing globalisation also brings tremendous impacts to post-industrial economies (e.g. Denmark). A dilemma therefore arises, i.e. whether it is still necessary to keep manufacturing in these post-industrial economies; if yes, what kinds of roles manufacturing should...

  20. Composite Structures Manufacturing Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The Composite Structures Manufacturing Facility specializes in the design, analysis, fabrication and testing of advanced composite structures and materials for both...

  1. Manufacturing Demonstration Facility (MDF)

    Data.gov (United States)

    Federal Laboratory Consortium — The U.S. Department of Energy Manufacturing Demonstration Facility (MDF) at Oak Ridge National Laboratory (ORNL) provides a collaborative, shared infrastructure to...

  2. Advanced Manufacturing Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — The Advanced Manufacturing Laboratory at the University of Maryland provides the state of the art facilities for realizing next generation products and educating the...

  3. Analysis of Parking Reliability Guidance of Urban Parking Variable Message Sign System

    Directory of Open Access Journals (Sweden)

    Zhenyu Mei

    2012-01-01

    Full Text Available Operators of parking guidance and information systems (PGIS often encounter difficulty in determining when and how to provide reliable car park availability information to drivers. Reliability has become a key factor to ensure the benefits of urban PGIS. The present paper is the first to define the guiding parking reliability of urban parking variable message signs (VMSs. By analyzing the parking choice under guiding and optional parking lots, a guiding parking reliability model was constructed. A mathematical program was formulated to determine the guiding parking reliability of VMS. The procedures were applied to a numerical example, and the factors that affect guiding reliability were analyzed. The quantitative changes of the parking berths and the display conditions of VMS were found to be the most important factors influencing guiding reliability. The parking guiding VMS achieved the best benefit when the parking supply was close to or was less than the demand. The combination of a guiding parking reliability model and parking choice behavior offers potential for PGIS operators to reduce traffic congestion in central city areas.

  4. Advanced Material Strategies for Next-Generation Additive Manufacturing

    Science.gov (United States)

    Chang, Jinke; He, Jiankang; Zhou, Wenxing; Lei, Qi; Li, Xiao; Li, Dichen

    2018-01-01

    Additive manufacturing (AM) has drawn tremendous attention in various fields. In recent years, great efforts have been made to develop novel additive manufacturing processes such as micro-/nano-scale 3D printing, bioprinting, and 4D printing for the fabrication of complex 3D structures with high resolution, living components, and multimaterials. The development of advanced functional materials is important for the implementation of these novel additive manufacturing processes. Here, a state-of-the-art review on advanced material strategies for novel additive manufacturing processes is provided, mainly including conductive materials, biomaterials, and smart materials. The advantages, limitations, and future perspectives of these materials for additive manufacturing are discussed. It is believed that the innovations of material strategies in parallel with the evolution of additive manufacturing processes will provide numerous possibilities for the fabrication of complex smart constructs with multiple functions, which will significantly widen the application fields of next-generation additive manufacturing. PMID:29361754

  5. Advanced Material Strategies for Next-Generation Additive Manufacturing.

    Science.gov (United States)

    Chang, Jinke; He, Jiankang; Mao, Mao; Zhou, Wenxing; Lei, Qi; Li, Xiao; Li, Dichen; Chua, Chee-Kai; Zhao, Xin

    2018-01-22

    Additive manufacturing (AM) has drawn tremendous attention in various fields. In recent years, great efforts have been made to develop novel additive manufacturing processes such as micro-/nano-scale 3D printing, bioprinting, and 4D printing for the fabrication of complex 3D structures with high resolution, living components, and multimaterials. The development of advanced functional materials is important for the implementation of these novel additive manufacturing processes. Here, a state-of-the-art review on advanced material strategies for novel additive manufacturing processes is provided, mainly including conductive materials, biomaterials, and smart materials. The advantages, limitations, and future perspectives of these materials for additive manufacturing are discussed. It is believed that the innovations of material strategies in parallel with the evolution of additive manufacturing processes will provide numerous possibilities for the fabrication of complex smart constructs with multiple functions, which will significantly widen the application fields of next-generation additive manufacturing.

  6. Advanced Material Strategies for Next-Generation Additive Manufacturing

    Directory of Open Access Journals (Sweden)

    Jinke Chang

    2018-01-01

    Full Text Available Additive manufacturing (AM has drawn tremendous attention in various fields. In recent years, great efforts have been made to develop novel additive manufacturing processes such as micro-/nano-scale 3D printing, bioprinting, and 4D printing for the fabrication of complex 3D structures with high resolution, living components, and multimaterials. The development of advanced functional materials is important for the implementation of these novel additive manufacturing processes. Here, a state-of-the-art review on advanced material strategies for novel additive manufacturing processes is provided, mainly including conductive materials, biomaterials, and smart materials. The advantages, limitations, and future perspectives of these materials for additive manufacturing are discussed. It is believed that the innovations of material strategies in parallel with the evolution of additive manufacturing processes will provide numerous possibilities for the fabrication of complex smart constructs with multiple functions, which will significantly widen the application fields of next-generation additive manufacturing.

  7. Denali Park wolf studies: Implications for Yellowstone

    Science.gov (United States)

    Mech, L. David; Meier, Thomas J.; Burch, John W.

    1991-01-01

    The Northern Rocky Mountain Wolf Recovery Plan approved by the U.S. Fish and Wildlife Service (1987) recommends re-establishment of wolves (Canis lupus) in Yellowstone National Park. Bills proposing wolf re-establishment in the Park have been introduced into the U.S. House and Senate. However, several questions have been raised about the possible effects of wolf re-establishment on other Yellowstone Park fauna, on human use of the Park and on human use of surrounding areas. Thus the proposed wolf re-establishment remains controversial.Information pertinent to some of the above questions is available from a current study of wolf ecology in Denali National Park and Preserve, Alaska, which we began in 1986. Although Denali Park differs from Yellowstone in several ways, it is also similar enough in important respects to provide insight into questions raised about wolf re-establishment in Yellowstone.

  8. SOME FEATURES OF THE DESIGN AND CONSTRUCTION OF UNDERGROUND PUBLIC AND SHOPPING CENTRE WITH PARKING IN MINSK

    Directory of Open Access Journals (Sweden)

    V. H. Pastushkov

    2010-03-01

    Full Text Available In the article some features of designing and construction, experimental-and-theoretical researches of structures of the multifunctional underground complex (public shopping center with parking on theIndependencesq. in Minsk are considered.

  9. CAR SECURITY ENHANCEMENT IN PARKING AREAS

    OpenAIRE

    NANYONGA BERINDA; AYESIGA LINDSEY PATRA; BYEKWASO FAISAL; NATULINDA LADAN

    2017-01-01

    Over time, car thefts have been reported within Kampala parking areas. This has been majorly due to inefficient security measures of the available parking systems which focus mainly on the car and not the driver, making parking management a challenge. The focus of this survey was to explore the requirements of a new system called Car to Driver Matching Security System to enhance security of cars in Kampala, in particular, from the experience of 15 people. The data collected was then analyzed ...

  10. Open Days: information on CERN parking

    CERN Document Server

    2013-01-01

    The organising team for the Open Days (28-29 September) would like to inform you that some parking sites in Meyrin and Prévessin will have to be kept free as of 18 September for the installation of tents and marquees.   Next week, CERN Management will address parking concerns and give you more information on other parking possibilities. The Open Day organising team thanks you for your cooperation and apologises for any inconvenience.

  11. Advanced parking management systems : a cross-cutting study : taking the stress out of parking

    Science.gov (United States)

    2007-01-01

    This study examines advanced parking management systems (APMSs) in three venues: airports, central business districts, and transit park-and-ride locations. Specifically, the systems examined in this study provide directional and space availability in...

  12. Tools of integration of innovation-oriented machine-building enterprises in industrial park environment

    Directory of Open Access Journals (Sweden)

    К.О. Boiarynova

    2017-08-01

    Full Text Available The research is devoted to the development of the tools for the integration of innovation-oriented mechanical engineering enterprises into the environment of industrial park as functional economic systems, which are capable on the own development basis to provide the development of resident enterprises. The article analyzes the opportunities for the development of mechanical engineering enterprises. The formed structure of the mechanism of integration of mechanical engineering enterprises as functional economic systems into the industrial park environment is based on: 1 the development of participation programs in the industrial park of the mechanical engineering enterprises as an innovation-oriented partner, which foresees the development of the enterprise immediately and the development of other residents; 2 the provision of high-tech equipment of resident enterprises of industrial parks; 3 the creation of subsidiary-spin-out enterprises of large mechanical engineering enterprises for high-tech production in the industrial park. The author proposes the road map that reveals the procedures for the integration and functioning the investigated enterprises through interaction as well as in the ecosystem of the industrial park and in the general ecosystem of functioning, and the tools for providing economic functionality through economic and organizational proceedings at preventive, partner and resident phases of integration. The tools allow the innovation-oriented mechanical engineering enterprises to integrate into such territorial structures as industrial parks, this in complex will allow carrying out their purposes in the development of the real sector of the economy.

  13. Amphibians of Olympic National Park

    Science.gov (United States)

    ,

    2000-01-01

    Amphibians evolved from fishes about 360 million years ago and were the first vertebrates adapted to life on land. The word amphibian means "double life." It refers to the life history of many amphibians, which spend part of their life in water and part on land. There are three major groups of amphibians: salamanders, frogs, and toads, and caecilians. Salamanders, frogs, and toads can be found in Olympic National Park (ONP), but caecilians live only in tropical regions. Many amphibians are generalist predators, eating almost any prey they can fit into their mouths.

  14. Lessons Learned During the Manufacture of the NCSX Modular Coils

    International Nuclear Information System (INIS)

    Chrzanowski, James H.; Meighan, Thomas G.; Raftopoulos, Steven; Dudek, Lawrence; Fogarty, Paul J.

    2009-01-01

    The National Compact Stellarator Experiment's (NCSX) modular coils presented a number of engineering and manufacturing challenges due to their complex shapes, requirements for high dimensional accuracy and high current density requirements due to space constraints. Being the first of their kind, these coils required the implementation of many new manufacturing and measuring techniques and procedures. This was the first time that these manufacturing techniques and methods were applied in the production of coils at the laboratory. This resulted in a steep learning curve for the first several coils. Through the effective use of procedures, tooling modifications, involvement and ownership by the manufacturing workforce, and an emphasis on safety, the assembly team was able to reduce the manufacturing times and improve upon the manufacturing methods. This paper will discuss the learning curve and steps that were taken to improve the manufacturing efficiency and reduce the manufacturing times for the modular coils without forfeiting quality

  15. Ecological Resilience of Small Urban Parks

    DEFF Research Database (Denmark)

    JasmaniI, Zanariah Binti

    consists of several sub-variables or attributes. The attributes of physical characteristics include park size, land use, park shape, proximity to a road and the presence of a water element. Elements relating to vegetation diversity, such as the presence and share of native and exotic species, presence....... Birds and butterflies react differently to various park maintenance practices (e.g. mowing). Based on the overall results, findings and discussion of the key features for bird and butterfly richness and abundance, study IV proposes nine recommendations for small urban parks to improve their ecological...

  16. Mode choice and shopping mall parking

    OpenAIRE

    Ersoy, Fulya Yüksel; Ersoy, Fulya Yuksel

    2012-01-01

    In this thesis, I analyze individuals' mode choice decisions and shopping mall's parking space pricing behavior. Individuals have three choices: first they may come to the mall by car in which case they have to park, second they may come by public transportation, or they do not visit the mall and go for their outside option. The mall determines the price of the good and the parking fee after the government sets public transportation fare. I find that the equilibrium parking fees are always le...

  17. Park Accessibility Impacts Housing Prices in Seoul

    Directory of Open Access Journals (Sweden)

    Jin Han Park

    2017-01-01

    Full Text Available Housing prices are determined by a variety of factors, including the features of the building and the neighborhood environment, and a potential buyer decides to buy a house after reviewing these factors and concluding that it is worth the price. We used Hedonic Price Methods to find the relationship between monetary value of house and access conditions to urban parks. Two meaningful results were discovered in this study: first, as the distance from the park increases, the value of the park inherent in the housing price decreases; second, the greater walking accessibility, to the park, the higher the park value inherent in housing prices. Despite presenting shorter distances to walk and more entrances, poorly accessible zones were deemed as such due to the necessity of crossing an arterial road. This indicates that the results can define accessibility not as the Euclidian distance but as the shortest walking distance while considering crossroads and park entrances. The results of this study have significant implications for urban park economic impact analyses in Seoul. Also, the increase in housing prices closer to parks supports the idea that access is dependent on the residents’ socioeconomic status. Lastly, the results of this study can improve walking accessibility to the park.

  18. Improving Project Manufacturing Coordination

    Directory of Open Access Journals (Sweden)

    Korpivaara Ville

    2014-09-01

    Full Text Available The objective of this research is to develop firms’ project manufacturing coordination. The development will be made by centralizing the manufacturing information flows in one system. To be able to centralize information, a deep user need assessment is required. After user needs have been identified, the existing system will be developed to match these needs. The theoretical background is achieved through exploring the literature of project manufacturing, development project success factors and different frameworks and tools for development project execution. The focus of this research is rather in customer need assessment than in system’s technical expertise. To ensure the deep understanding of customer needs this study is executed by action research method. As a result of this research the information system for project manufacturing coordination was developed to respond revealed needs of the stakeholders. The new system improves the quality of the manufacturing information, eliminates waste in manufacturing coordination processes and offers a better visibility to the project manufacturing. Hence it provides a solid base for the further development of project manufacturing.

  19. Modern manufacturing engineering

    CERN Document Server

    2015-01-01

    This book covers recent research and trends in Manufacturing Engineering. The chapters emphasize different aspects of the transformation from materials to products. It provides the reader with fundamental materials treatments and the integration of processes. Concepts such as green and lean manufacturing are also covered in this book.

  20. iParking: An Intelligent Indoor Location-Based Smartphone Parking Service

    OpenAIRE

    Liu, Jingbin; Chen, Ruizhi; Chen, Yuwei; Pei, Ling; Chen, Liang

    2012-01-01

    Indoor positioning technologies have been widely studied with a number of solutions being proposed, yet substantial applications and services are still fairly primitive. Taking advantage of the emerging concept of the connected car, the popularity of smartphones and mobile Internet, and precise indoor locations, this study presents the development of a novel intelligent parking service called iParking. With the iParking service, multiple parties such as users, parking facilities and service p...

  1. Smart Parking Management Pilot Project: A Bay Area Rapid Transit (BART) District Parking Demonstration

    OpenAIRE

    Shaheen, Susan; Rodier, Caroline; Eaken, Amanda M.

    2005-01-01

    This report presents early findings from an application of advanced parking technologies to maximize existing parking capacity at the Rockridge BART station, which was launched in December 2004 in the East San Francisco Bay Area. The smart parking system includes traffic sensors that count the number of vehicles entering and exiting the parking lots at the station. A reservation system allows travelers to reserve spaces by Internet, personal digital assistant (PDA), phone, and cell phone. The...

  2. 36 CFR 7.39 - Mesa Verde National Park.

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false Mesa Verde National Park. 7... SPECIAL REGULATIONS, AREAS OF THE NATIONAL PARK SYSTEM § 7.39 Mesa Verde National Park. (a) Visiting of... the admission of commercial automobiles and buses to Mesa Verde National Park, contained in § 5.4 of...

  3. A city park on top of shops and a dike

    NARCIS (Netherlands)

    van Veelen, P.C.; Voorendt, M.Z.; van der Zwet, C; Kothuis, Baukje; Kok, Matthijs

    2017-01-01

    The Roof Park ('Dakpark’) is an elevated park on a former railway yard in the Delfshaven quarter in Rotterdam. The park is located on top of the roof of a new shopping centre, which includes a parking garage (hence its name, ‘dak’ means ‘roof’). The park is the

  4. Preferences, benefits, and park visits: a latent class segmentation analysis

    NARCIS (Netherlands)

    Kemperman, A.D.A.M.; Timmermans, H.J.P.

    2006-01-01

    This study describes and predicts segments of urban park visitors to support park planning and policy making. A latent class analysis is used to identify segments of park users who differ regarding their preferences for park characteristics, benefits sought in park visits, and sociodemographics.

  5. Optimized manufacturable porous materials

    DEFF Research Database (Denmark)

    Andreassen, Erik; Andreasen, Casper Schousboe; Jensen, Jakob Søndergaard

    Topology optimization has been used to design two-dimensional material structures with specific elastic properties, but optimized designs of three-dimensional material structures are more scarsely seen. Partly because it requires more computational power, and partly because it is a major challenge...... to include manufacturing constraints in the optimization. This work focuses on incorporating the manufacturability into the optimization procedure, allowing the resulting material structure to be manufactured directly using rapid manufacturing techniques, such as selective laser melting/sintering (SLM....../S). The available manufacturing methods are best suited for porous materials (one constituent and void), but the optimization procedure can easily include more constituents. The elasticity tensor is found from one unit cell using the homogenization method together with a standard finite element (FE) discretization...

  6. Carbon footprint evaluation at industrial park level: A hybrid life cycle assessment approach

    International Nuclear Information System (INIS)

    Dong, Huijuan; Geng, Yong; Xi, Fengming; Fujita, Tsuyoshi

    2013-01-01

    Industrial parks have become the effective strategies for government to promote sustainable economic development due to the following advantages: shared infrastructure and concentrated industrial activities within planned areas. However, due to intensive energy consumption and dependence on fossil fuels, industrial parks have become the main areas for greenhouse gas emissions. Therefore, it is critical to quantify their carbon footprints so that appropriate emission reduction policies can be raised. The objective of this paper is to seek an appropriate method on evaluating the carbon footprint of one industrial park. The tiered hybrid LCA method was selected due to its advantages over other methods. Shenyang Economic and Technological Development Zone (SETDZ), a typical comprehensive industrial park in China, was chosen as a case study park. The results show that the total life cycle carbon footprint of SETDZ was 15.29 Mt, including 6.81 Mt onsite (direct) carbon footprint, 8.47 Mt upstream carbon footprint, and only 3201 t downstream carbon footprint. Analysis from industrial sector perspectives shows that chemical industry and manufacture of general purpose machinery and special purposes machinery sector were the two largest sectors for life cycle carbon footprint. Such a sector analysis may be useful for investigation of appropriate emission reduction policies. - Highlights: ► A hybrid LCA model was employed to calculate industrial park carbon footprint. ► A case study on SETDZ is done. ► Life cycle carbon footprint of SETDZ is 15.29 Mt. ► Upstream and onsite carbon footprints account for 55.40% and 44.57%, respectively. ► Chemical industry and machinery manufacturing sectors are the two largest sectors

  7. Impacts of national parks on tourism: a case study from a prominent alpine national park

    International Nuclear Information System (INIS)

    Getzner, M.

    2008-01-01

    National parks and other categories of protected areas are often assumed to enhance regional economic development due to park tourism. The current study attempts to estimate the impact of the Hohe Tauern national park (Austria) on tourism by exploring whether and to what extent the national park may have had an influence on tourism development. For most national park communities, the results suggest that the establishment of the national park had some impact by enforcing an already positive trend or by weakening or reversing a negative trend of tourism. However, breakpoint tests exhibit turning points up to several years after the establishment of the park, indicating that taking a national park as the basis for tourism development is a medium to long term development strategy. In the short term, the impact of a national park on tourism is not measurable. Tourism increased by 1 to 3% annually after the breakpoint, indicating that the establishment of a national park has to be incorporated into the tourism and development strategy of a region right from the start. The causal relationship between the establishment of the national park and tourism development may be weak, in particular in communities where the difference between the actual and the forecast numbers of overnight stays is small. Marketing national park tourism and building up a brand or distinctive label may therefore contribute to regional development particularly in the long term. [it

  8. Analytic Approach to Resolving Parking Problems in Downtown Zagreb

    Directory of Open Access Journals (Sweden)

    Adolf Malić

    2005-01-01

    Full Text Available Parking issue is one of the major problems in Zagreb, andin relation to that Zagreb does not differ from other similar orbigger European cities. The problem the city is facing is beingpresented in the paper. It is complex and can be solved gradually,using operative and planning measures, by applying influentialparameters assessments based on which the appropriateparking-garage spaces assessment would be selected. Besides,all the knowledge learned from experiences of similar Europeancities should be used in resolving stationary traffic problem.Introduction of fast public urban transport would providepassengers with improved services (particularly in relation tothe travelling time introducing modern traffic system thatwould reduce the travelling time to below 30 minutes for the farthestrelations. Further improvement in reducing parking problemsin downtown as well as Zagreb broader area would not bepossible without t,nplementing th.s approach.

  9. The inauguration of Robert-Bourassa Park at James Bay

    International Nuclear Information System (INIS)

    Valiquette, M.

    1997-01-01

    Robert Bourassa's contributions to the hydroelectric development at James Bay were acknowledged with the inauguration of a park in the ex-prime minister's name. Phase 1 of the James Bay hydroelectric project constituted the world's biggest construction site, employing more than 180,000 people from beginning to project completion. The James Bay project allowed Hydro-Quebec to gain one of the world's largest electric power utilities and to gain significant competitive edge over its competitors. The Robert Bourassa Park contains a picnic area and a visitor interpretation centre which describes the history of the project. A sequence of 5 signposts summarize the contributions that Robert Bourassa made to the megaproject which cost over $20.6 billion. The complex consists of 65 turbines which produce 15,235 megawatts of electricity. 1 fig

  10. Post Processing Methods used to Improve Surface Finish of Products which are Manufactured by Additive Manufacturing Technologies: A Review

    Science.gov (United States)

    Kumbhar, N. N.; Mulay, A. V.

    2016-08-01

    The Additive Manufacturing (AM) processes open the possibility to go directly from Computer-Aided Design (CAD) to a physical prototype. These prototypes are used as test models before it is finalized as well as sometimes as a final product. Additive Manufacturing has many advantages over the traditional process used to develop a product such as allowing early customer involvement in product development, complex shape generation and also save time as well as money. Additive manufacturing also possess some special challenges that are usually worth overcoming such as Poor Surface quality, Physical Properties and use of specific raw material for manufacturing. To improve the surface quality several attempts had been made by controlling various process parameters of Additive manufacturing and also applying different post processing techniques on components manufactured by Additive manufacturing. The main objective of this work is to document an extensive literature review in the general area of post processing techniques which are used in Additive manufacturing.

  11. Case study: centralized wastewater treatment plant at Rawang Integrated Industrial Park

    International Nuclear Information System (INIS)

    Ting Teo Ming; Khomsaton Abu Bakar; Zulkafli Ghazali; Khairul Zaman Mohd Dahlan

    2006-01-01

    Survey has been conducted at Rawang Integrated Industrial Park (RIIP) to investigate the possibility of setting up centralized industrial wastewater treatment plant. Rawang integrated industrial park is selected based on suggestion from department of environment. RIIP consists of about 150 industries with various type of activities operated in the area. Only 9 out of estimated 150 industries have individual wastewater treatment plant. The business activities of the 9 industries include food processing, textile, welding rods manufacturing, steel galvanizing and battery manufacturing. Wastewater generated by the industries are characterized by high oil and grease, cod, bod, organic matter, metal hydroxide and acidic. Besides that most of industries do the monitoring only once a month. This paper will also discuss the advantages of setting up of centralized industrial wastewater treatment plant to the government authorities, industries, people and environment. (Author)

  12. Robotics In Manufacturing: Army View

    Science.gov (United States)

    Michel, F. J.

    1983-05-01

    (Figure 1) This is an outline of my presentation today. The U. S. Army has a dual interest in the use of robots, namely: 1. As a substitute for or an extension of the soldier in the battlefield, and 2. in the factories that make Army materiel, or - as we call it -the the production base. The Production Base can again be divided into three separate segments, i.e., the Army owned and operated facilities or GOG6s, such as Rock Island and Watervliet arsenals, and not to be overlooked, the depot operations. There the Army manufactures gun tubes and other related parts for artillery weapons and repairs and overhauls them. A second category is the Army owned and contractor operated facilities or GOCOs,such as the ammunition plants, the tank plants at Lima, Ohio and Warren, Michigan and the Stratford Engine Plant in Connecticut where gas turbines for helicopter and the Abrams tank are manufactured. The last category covers the industrial base, that is those factories which are not only operated but also owned by the contractor himself also referred to as COCOs. You can see from this description that the Army is supported by a base which produces a diversified line of products. Therefore, the task of technology development and technology insertion is considerably more complex than what one encounters in the average U. S. Manufacturing organization.

  13. Towards an Automatic Parking System using Bio-Inspired 1-D Optical Flow Sensors

    OpenAIRE

    Mafrica , Stefano; Servel , Alain; Ruffier , Franck

    2015-01-01

    International audience; Although several (semi-) automatic parking systems have been presented throughout the years [1]–[12], car manufacturers are still looking for low-cost sensors providing redundant information about the obstacles around the vehicle, as well as efficient methods of processing this information, in the hope of achieving a very high level of robustness. We therefore investigated how Local Motion Sensors (LMSs) [13], [14], comprising only of a few pixels giving 1-D optical fl...

  14. Manufacture of disposal canisters

    International Nuclear Information System (INIS)

    Nolvi, L.

    2009-12-01

    The report summarizes the development work carried out in the manufacturing of disposal canister components, and present status, in readiness for manufacturing, of the components for use in assembly of spent nuclear fuel disposal canister. The disposal canister consist of two major components: the nodular graphite cast iron insert and overpack of oxygen-free copper. The manufacturing process for copper components begins with a cylindrical cast copper billet. Three different manufacturing processes i.e. pierce and draw, extrusion and forging are being developed, which produce a seamless copper tube or a tube with an integrated bottom. The pierce and draw process, Posiva's reference method, makes an integrated bottom possible and only the lid requires welding. Inserts for BWR-element are cast with 12 square channels and inserts for VVER 440-element with 12 round channels. Inserts for EPR-elements have four square channels. Casting of BWR insert type has been studied so far. Experience of casting inserts for PWR, which is similar to the EPR-type, has been got in co-operation with SKB. The report describes the processes being developed for manufacture of disposal canister components and some results of the manufacturing experiments are presented. Quality assurance and quality control in manufacture of canister component is described. (orig.)

  15. Micro/Nano manufacturing

    DEFF Research Database (Denmark)

    Tosello, Guido

    2017-01-01

    Micro- and nano-scale manufacturing has been the subject of an increasing amount of interest and research effort worldwide in both academia and industry over the past 10 years.Traditional (MEMS) manufacturing, but also precision manufacturing technologies have been developed to cover micro......-scale dimensions and accuracies. Furthermore, these fundamentally different technology ecosystems are currently combined in order to exploit strengths of both platforms. One example is the use of lithography-based technologies to establish nanostructures that are subsequently transferred to 3D geometries via...

  16. 45 CFR 3.23 - Parking.

    Science.gov (United States)

    2010-10-01

    ... DEPARTMENT OF HEALTH AND HUMAN SERVICES GENERAL ADMINISTRATION CONDUCT OF PERSONS AND TRAFFIC ON THE NATIONAL INSTITUTES OF HEALTH FEDERAL ENCLAVE Traffic Regulations § 3.23 Parking. (a) A person may not stand (vehicle... sign, crosswalk, or traffic control signal; (5) In a double-parked position; (6) At a curb painted...

  17. Parking guidance - modelling, simulation and impact assessment

    NARCIS (Netherlands)

    Jonkers, E.; Noort, M. van; Veen, J.L. van der

    2011-01-01

    Intelligent parking services that help drivers with reservation of a parking spot, navigation and automated payment have reached the deployment phase. These services may provide significant benefits to drivers and municipalities. Drivers may experience an increase in comfort and lower and more

  18. Modelling Space Appropriation in Public Parks

    NARCIS (Netherlands)

    Ostermann, F.O.; Timpf, S.; Wachowicz, Monica; Bodum, Lars

    2007-01-01

    Sustainable park management encompasses the requirement to provide equal opportunities for access and usage of the park, regardless of age, gender or nationality of the visitors. It thereby presents opportunities as well as problems for today’s heterogeneous global cities. The research presented

  19. Family structure and park use among parents.

    Science.gov (United States)

    Fan, Yingling; French, Simone A; Das, Kirti V

    2012-11-01

    Despite the increasingly diversified family structure in the U.S., little research examines differences in park use between nontraditional and traditional family structures. This study examines family-structure differences in parent park use. It was hypothesized that working single parents and dual-worker parents have lower levels of park use than parents in two-parent, single-worker families. Data from a 2010 park-use survey in three urban neighborhoods in Minneapolis MN (N=261 parents) were analyzed in 2012. Multiple variables of park use were developed, including recalled measures over the past 3 days and over the past year. Family-structure differences in these variables were examined using multivariate regression analyses. After controlling for spatial clustering effects and confounding factors, working single parents reported 32.6% (pparents in two-parent, single-worker families. Dual-worker parents did not report fewer park visits in the past 3 days than parents in two-parent, single-worker families, yet the length of time they spent in parks during these visits was 41.5% (psingle parents and dual-worker parents is needed in descriptive and intervention research aiming to promote park use among families with children. Copyright © 2012 American Journal of Preventive Medicine. Published by Elsevier Inc. All rights reserved.

  20. Parking regulations on the CERN sites

    CERN Multimedia

    General Infrastructure Services Department

    2010-01-01

    The site surveillance service is also responsible for supervising compliance with the parking regulations on the CERN site. In that context, it ensures that the following rules are complied with on the CERN car park: Vehicles may not be left on a CERN car park for longer than 5 consecutive working days. However, CERN users are entitled to leave their vehicles parked at CERN for a longer period in the car park near Building 588 , subject to completing the application form "Demande d'autorisation pour un stationnement de longue durée" (application for a long-term parking permit) and sending it to the Reception and Access Control Service (access.surveillance@cern.ch) prior to departure.   Parking spaces, which are in short supply in many crowded areas of the CERN site, must not be occupied by abandoned vehicles/wrecks. The service organizes the disposal of such vehicles. Any CERN users wishing to get rid of a private vehicle parked on one of the CERN car pa...

  1. Private Sector Thinking Saves Park U.

    Science.gov (United States)

    Breckon, Donald; Gibb, John

    2000-01-01

    Recounts the restructuring and resulting survival of Park University (Missouri) over the last decade. A process of evaluating the university's competitive strategy resulted in changes in tuition pricing; development of the Park School of Distance Learning, which serves primarily military installations; minority student marketing; and development…

  2. The external cruising costs of parking

    NARCIS (Netherlands)

    Inci, E.; van Ommeren, J.N.; Kobus, Martijn

    2017-01-01

    Existing work emphasizes the importance of traffic congestion externalities, but typically ignores cruising-for-parking externalities. We estimate the marginal external cruising costs of parking—that is, the time costs that an additional parked car imposes on drivers by inducing them to cruise for

  3. Full-Automatic Parking registration and payment

    DEFF Research Database (Denmark)

    Agerholm, Niels; Lahrmann, Harry; Jørgensen, Brian

    2014-01-01

    As part of ITS Platform North Denmark, a full-automatic GNSS-based parking payment (PP) system was developed (PP app). On the basis of the parking position and parking time, the PP app can determine the price of parking and collect the amount from the car owner’s bank account. The driver...... is informed about any initiation of PP via SMS message. If the driver finds the payment erroneous, it can be cancelled via SMS message. Parking attendants can check if the car in question has an ongoing payment for parking. To handle the problems with GNSS-based positioning in densely built-up areas......, an advanced map matching algorithm was integrated in the PP app. 24 of the participating vehicles used the PP app, and 58 parking payments were carried out without errors. In a few cases, the wrong parking area was selected. This was due to lack of information in the map rather than errors in the map matching...

  4. Modelling of fire spread in car parks

    NARCIS (Netherlands)

    Noordijk, L.M.; Lemaire, A.D.

    2005-01-01

    Currently, design codes assume that in a car park fire at most 3-4 vehicles are on fire at the same time. Recent incidents in car parks have drawn international attention to such assumptions and have raised questions as to the fire spreading mechanism and the resulting fire load on the structure.

  5. Domestic parking estimation using remotely sensed data

    Science.gov (United States)

    Ramzi, Ahmed

    2012-10-01

    Parking is an integral part of the traffic system everywhere. Provision of parking facilities to meet peak of demands parking in cities of millions is always a real challenge for traffic and transport experts. Parking demand is a function of population and car ownership which is obtained from traffic statistics. Parking supply in an area is the number of legal parking stalls available in that area. The traditional treatment of the parking studies utilizes data collected either directly from on street counting and inquiries or indirectly from local and national traffic censuses. Both methods consume time, efforts, and funds. Alternatively, it is reasonable to make use of the eventually available data based on remotely sensed data which might be flown for other purposes. The objective of this work is to develop a new approach based on utilization of integration of remotely sensed data, field measurements, censuses and traffic records of the studied area for studying domestic parking problems in residential areas especially in informal areas. Expected outcomes from the research project establish a methodology to manage the issue and to find the reasons caused the shortage in domestics and the solutions to overcome this problems.

  6. Markov chain of distances between parked cars

    International Nuclear Information System (INIS)

    Seba, Petr

    2008-01-01

    We describe the distribution of distances between parked cars as a solution of certain Markov processes and show that its solution is obtained with the help of a distributional fixed point equation. Under certain conditions the process is solved explicitly. The resulting probability density is compared with the actual parking data measured in the city. (fast track communication)

  7. Mapping wilderness character in Olympic National Park

    Science.gov (United States)

    James Tricker; Peter Landres; Jennifer Chenoweth; Roger Hoffman; Scott Ruth

    2013-01-01

    The Olympic Wilderness was established November 16, 1988 when President Ronald Reagan signed the Washington Park Wilderness Act. A total of 876,447 acres or 95% of Olympic National Park (OLYM) was designated as wilderness and became a part of the National Wilderness Preservation System, wherein wilderness character would be preserved. The purpose of this project was to...

  8. Tourists' motivations for visiting Kakum National Park, Ghana ...

    African Journals Online (AJOL)

    Tourists' motivations for visiting Kakum National Park, Ghana. ... four main motivations of tourists who visited the park, namely adventure, education, ... Park were influenced by varied combinations of intrinsic and extrinsic motivational factors.

  9. The Tankwa Karoo National Park feral goat population: A unique ...

    African Journals Online (AJOL)

    The Tankwa Karoo National Park feral goat population: A unique genetic ... The feral goats from Tankwa Karoo National Park in the Northern Cape, South Africa, ... Park and former Tankwa goats, now kept on a private farm were genotyped, ...

  10. iParking: an intelligent indoor location-based smartphone parking service.

    Science.gov (United States)

    Liu, Jingbin; Chen, Ruizhi; Chen, Yuwei; Pei, Ling; Chen, Liang

    2012-10-31

    Indoor positioning technologies have been widely studied with a number of solutions being proposed, yet substantial applications and services are still fairly primitive. Taking advantage of the emerging concept of the connected car, the popularity of smartphones and mobile Internet, and precise indoor locations, this study presents the development of a novel intelligent parking service called iParking. With the iParking service, multiple parties such as users, parking facilities and service providers are connected through Internet in a distributed architecture. The client software is a light-weight application running on a smartphone, and it works essentially based on a precise indoor positioning solution, which fuses Wireless Local Area Network (WLAN) signals and the measurements of the built-in sensors of the smartphones. The positioning accuracy, availability and reliability of the proposed positioning solution are adequate for facilitating the novel parking service. An iParking prototype has been developed and demonstrated in a real parking environment at a shopping mall. The demonstration showed how the iParking service could improve the parking experience and increase the efficiency of parking facilities. The iParking is a novel service in terms of cost- and energy-efficient solution.

  11. iParking: An Intelligent Indoor Location-Based Smartphone Parking Service

    Directory of Open Access Journals (Sweden)

    Liang Chen

    2012-10-01

    Full Text Available Indoor positioning technologies have been widely studied with a number of solutions being proposed, yet substantial applications and services are still fairly primitive. Taking advantage of the emerging concept of the connected car, the popularity of smartphones and mobile Internet, and precise indoor locations, this study presents the development of a novel intelligent parking service called iParking. With the iParking service, multiple parties such as users, parking facilities and service providers are connected through Internet in a distributed architecture. The client software is a light-weight application running on a smartphone, and it works essentially based on a precise indoor positioning solution, which fuses Wireless Local Area Network (WLAN signals and the measurements of the built-in sensors of the smartphones. The positioning accuracy, availability and reliability of the proposed positioning solution are adequate for facilitating the novel parking service. An iParking prototype has been developed and demonstrated in a real parking environment at a shopping mall. The demonstration showed how the iParking service could improve the parking experience and increase the efficiency of parking facilities. The iParking is a novel service in terms of cost- and energy-efficient solution.

  12. Capacity Analysis Of Parking Lot And Volume Of Vehicle Toward Sustainable Parking Convenience

    Science.gov (United States)

    Herdiansyah, Herdis; Sugiyanto; Guntur Octavianto, Andrew; Guntur Aritonang, Edison; Nova Imaduddin, Malya; Dedi; Rilaningrum, Magfira

    2017-10-01

    The development of human's population is having effect on the increase of facilities and transportation needs. One of the primary problems is the availability of parking area. This has occurred in Universitas Indonesia (UI), mainly in Salemba Campus. The availability of land is not as equal as the number of vehicles, which are to be parked, that is why the convenience of students, lecturers and employees at UI is unsatisfactory. The purpose of this paper is to know the level of parking convenience that is affected by the capacity of parking lots and the volume of vehicles in UI Salemba Campus. The results of this research indicate Salemba campus's parking index. The motor index is still in the category of medium (index 0.945) and the car parking index has less category with a parking index 0.485. While with the location of research object being behind the UI Salemba campus, the results obtained were both the motor and the car are still in the category of “enough” with the parking index of, that is 0.657 for the motor and 0.777 for the car. So theoretically, the parking management at Salemba Campus is in an unsustainable parking degree because, if there is no long-term solution, it will increase congestion in the surrounding area and intensify the dissatisfaction of existing parking users.

  13. iParking: An Intelligent Indoor Location-Based Smartphone Parking Service

    Science.gov (United States)

    Liu, Jingbin; Chen, Ruizhi; Chen, Yuwei; Pei, Ling; Chen, Liang

    2012-01-01

    Indoor positioning technologies have been widely studied with a number of solutions being proposed, yet substantial applications and services are still fairly primitive. Taking advantage of the emerging concept of the connected car, the popularity of smartphones and mobile Internet, and precise indoor locations, this study presents the development of a novel intelligent parking service called iParking. With the iParking service, multiple parties such as users, parking facilities and service providers are connected through Internet in a distributed architecture. The client software is a light-weight application running on a smartphone, and it works essentially based on a precise indoor positioning solution, which fuses Wireless Local Area Network (WLAN) signals and the measurements of the built-in sensors of the smartphones. The positioning accuracy, availability and reliability of the proposed positioning solution are adequate for facilitating the novel parking service. An iParking prototype has been developed and demonstrated in a real parking environment at a shopping mall. The demonstration showed how the iParking service could improve the parking experience and increase the efficiency of parking facilities. The iParking is a novel service in terms of cost- and energy-efficient solution. PMID:23202179

  14. Fear of crime in urban parks

    DEFF Research Database (Denmark)

    Maruthaveeran, Sreetheran; Konijnendijk, Cecil Cornelis

    2015-01-01

    This study was conducted to determine the attributes which evoke ‘fear of crime’ and to determine the defensive behaviour among the urban park users. Findings are based on qualitative studies undertaken in the city of Kuala Lumpur among the park and non-park users (N = 19) by means of semi......-structured in-depth interviews. The interview consists of respondents from various age, gender and race. The results revealed universal similarities to other cultures on fear of crime in urban green spaces. This study has highlighted eight themes on the attributes which evoke fear among the residents of Kuala...... behaviour towards crime in urban parks but this was only observed among the women. This paper has also highlighted the implications on park planning and management from the comments given by the respondents. Though the aspect of fear towards crime in urban green spaces is not a major focus in Malaysia...

  15. Conditions for the management of carrying capacity in the parks of Parks&Benefits

    DEFF Research Database (Denmark)

    Brandt, Jesper; Holmes, Esbern

    2011-01-01

    Growth in the number of visitors is an upcoming problem in nature parks. Nature parks are at the same time facing increasing demand, falling public appropriations and receding focus on their conservation functions. To ensure a balancing of nature protection and economic utilization the concept...... stakeholders, balancing use and protection preferably based on scientific and/or experiential cognition. The conditions for the management of carrying capacity for the 8 nature parks in the EC Baltic Project Parks&Benefits are analysed in the report. 1. Part focus on the methodology, concentrated...... on the comparison of the common conditions related to the international nature protection obligations in the parks, primarily expressed through the management under the EU Natura2000-program. In part 2, a comparison of the 8 parks concerning extent, land use composition, population in and around the park...

  16. IMPLEMENTATION OF IMAGE PROCESSING IN REAL TIME CAR PARKING SYSTEM

    OpenAIRE

    SAYANTI BANERJEE,; PALLAVI CHOUDEKAR,; M.K.MUJU

    2011-01-01

    Car parking lots are an important object class in many traffic and civilian applications. With the problems of increasing urban trafficcongestion and the ever increasing shortage of space, these car parking lots are needed to be well equipped with automatic parkingInformation and Guidance systems. Goals of intelligent parking lot management include counting the number of parked cars, and identifyingthe available location. This work proposes a new system for providing parking information and g...

  17. The role of outsourcing in Lean Manufacturing

    DEFF Research Database (Denmark)

    Bjarnø, Ole-Christian

    2003-01-01

    In this article a longitudinal study performed at a medium-sized producer of electronics is reported during which we studied the company’s manufacturing change process. Based on theories of outsourcing, reengineering and explorative case research a series of findings is identified which demonstra......In this article a longitudinal study performed at a medium-sized producer of electronics is reported during which we studied the company’s manufacturing change process. Based on theories of outsourcing, reengineering and explorative case research a series of findings is identified which...... degree of complexity by introducing many new product lines, without phasing out very many of the old products could be changed into a far less complex organisation through reengineering and outsourcing. This again opened up for the application of the tool kit in Lean Manufacturing, and through...

  18. Manufacturing tolerant topology optimization

    DEFF Research Database (Denmark)

    Sigmund, Ole

    2009-01-01

    In this paper we present an extension of the topology optimization method to include uncertainties during the fabrication of macro, micro and nano structures. More specifically, we consider devices that are manufactured using processes which may result in (uniformly) too thin (eroded) or too thick...... (dilated) structures compared to the intended topology. Examples are MEMS devices manufactured using etching processes, nano-devices manufactured using e-beam lithography or laser micro-machining and macro structures manufactured using milling processes. In the suggested robust topology optimization...... approach, under- and over-etching is modelled by image processing-based "erode" and "dilate" operators and the optimization problem is formulated as a worst case design problem. Applications of the method to the design of macro structures for minimum compliance and micro compliant mechanisms show...

  19. Manufacturing parabolic mirrors

    CERN Multimedia

    CERN PhotoLab

    1975-01-01

    The photo shows the construction of a vertical centrifuge mounted on an air cushion, with a precision of 1/10000 during rotation, used for the manufacture of very high=precision parabolic mirrors. (See Annual Report 1974.)

  20. MEDICAL MANUFACTURING INNOVATIONS

    Directory of Open Access Journals (Sweden)

    Cosma Sorin Cosmin

    2015-02-01

    Full Text Available The purpose of these studies was to improve the design and manufacturing process by selective laser melting, of new medical implants. After manufacturing process, the implants were measured, microscopically and mechanical analyzed. Implants manufactured by AM can be an attractive option for surface coatings to improve the osseointegration process. The main advantages of customized implants made by AM process are: the precise adaptation to the region of implantation, better cosmesis, reduced surgical times and better performance over their generic counterparts. These medical manufacturing changes the way that the surgeons are planning surgeries and engineers are designing custom implant. AM process has eliminated the constraints of shape, size, internal structure and mechanical properties making it possible for fabrication of implants that conform to the physical and mechanical requirements of implantation according to CT images. This article will review some custom implants fabricated in DME using biocompatible titanium.

  1. Manufacturing Enterprise in Asia

    International Development Research Centre (IDRC) Digital Library (Canada)

    2017-12-13

    Dec 13, 2017 ... 53 Designing Financial Systems in East Asia and Japan ..... 5.3 Weights for the industrial production index (%) ..... The demand for manufactured goods for this low level of consumption per capita also tends to be very low.

  2. Sustainable urban spaces: Ecological parks

    Directory of Open Access Journals (Sweden)

    Burçak Erdoğan Onur

    2016-01-01

    Full Text Available Rapidly depleted resources with technological and economic developments which increased in recent years has led to deterioration of the natural balance in the world. Urban ecosystems is considerably changed, especially with population growth and intensive construction in the city. This situation, as such in all other areas, urban ecosystems are also increasing their sustainability concerns. More compatible solution with the natural process in landscape design and management have to be brought. This article describes the conceptual structure of ecological park that has become a tool for sustainable urban target in community that matured of environmental awareness. Also planning, design and management principles are explained by supporting with application examples. The obtained results within the framework, it is aimed to create a source for similar applications that will lead to spread in our country. In addition, it is put forward suggestions for dissemination of such practices.

  3. The Upper Danube Nature Park

    International Nuclear Information System (INIS)

    Dosedla, H.C.

    1997-01-01

    When in 1980 the Upper Danube Nature Park was founded as one of 65 nature sanctuaries in Germany there was great diversity of opinions concerning its intended character. The protected region consisting of a geologically outstanding landscape within central Europe is covering the first 80 km the upper Danube where the young river shortly after it's source in the Black Forest is breaking through the narrow canyons of the Jurassic rock plateau of the so-called Suebian Alps and also locates the subterranean passage where the stream is submerging from the surface for nearly ten miles. Since the purpose of nature preservation according to German las is closely combined with the rather contradicting aim of offering an attractive recreation area thus facing the immense impacts of modern mass tourism there are numerous problems which in the course of years have resulted in an intricate patterns of subtle management methods coping with the growing awareness of the ecological balance. (author)

  4. Photovoltaics at Point Pelee Park

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-12-01

    Case study of an Ontario Hydro-installed photovoltaic system at Point Pelee Park, a bird sanctuary located on Lake Erie, is described. The system consists of a 1080 W photovoltaic array used to supply electricity to one of the washrooms. The cost for installing the system was $30,000 which was considerably cheaper than the $100,000 estimate for an underground power line. The independent system is the only source of energy for the washroom, therefore it was necessary to reduce the total electrical demand required by the facility. Electricity was used for the water pump, chlorinator and lighting. Motion sensors were installed to further reduce electrical demand. Washroom heaters were converted to propane. 2 figs.

  5. Additive manufactured serialization

    Science.gov (United States)

    Bobbitt, III, John T.

    2017-04-18

    Methods for forming an identifying mark in a structure are described. The method is used in conjunction with an additive manufacturing method and includes the alteration of a process parameter during the manufacturing process. The method can form in a unique identifying mark within or on the surface of a structure that is virtually impossible to be replicated. Methods can provide a high level of confidence that the identifying mark will remain unaltered on the formed structure.

  6. 78 FR 30333 - Manufacturer of Controlled Substances; Notice of Registration; Siegfried (Usa), Llc.

    Science.gov (United States)

    2013-05-22

    ...; Notice of Registration; Siegfried (Usa), Llc. By Notice dated November 19, 2012, and published in the Federal Register on November 27, 2012, 77 FR 70825, Siegfried (USA), LLC., 33 Industrial Park Road... 21 U.S.C. 823(a) and determined that the registration of Siegfried (USA), LLC., to manufacture the...

  7. 77 FR 30027 - Manufacturer of Controlled Substances; Notice of Registration; Siegfried (USA)

    Science.gov (United States)

    2012-05-21

    ...; Notice of Registration; Siegfried (USA) By Notice dated January 6, 2012, and published in the Federal Register on January 17, 2012, 77 FR 2323, Siegfried (USA), 33 Industrial Park Road, Pennsville, New Jersey... U.S.C. 823(a) and determined that the registration of Siegfried (USA), to manufacture the listed...

  8. 78 FR 46613 - Manufacturer of Controlled Substances; Notice of Application; Siegfried (USA), LLC

    Science.gov (United States)

    2013-08-01

    ... DEPARTMENT OF JUSTICE Drug Enforcement Administration Manufacturer of Controlled Substances; Notice of Application; Siegfried (USA), LLC Pursuant to Sec. 1301.33(a), Title 21 of the Code of Federal Regulations (CFR), this is notice that on June 10, 2013, Siegfried (USA), LLC., 33 Industrial Park Road...

  9. 78 FR 5500 - Manufacturer of Controlled Substances, Notice of Application; Siegfried (USA)

    Science.gov (United States)

    2013-01-25

    ... DEPARTMENT OF JUSTICE Drug Enforcement Administration Manufacturer of Controlled Substances, Notice of Application; Siegfried (USA) Pursuant to Sec. 1301.33(a), Title 21 of the Code of Federal Regulations (CFR), this is notice that on June 19, 2012, Siegfried (USA), 33 Industrial Park Road, Pennsville...

  10. 78 FR 64020 - Manufacturer of Controlled Substances; Notice of Registration; Siegfried USA, LLC

    Science.gov (United States)

    2013-10-25

    ...; Notice of Registration; Siegfried USA, LLC By Notice dated May 22, 2013, and published in the Federal Register on May 30, 2013, 78 FR 32458, Siegfried USA, LLC., 33 Industrial Park Road, Pennsville, New Jersey... determined that the registration of Siegfried USA, LLC., to manufacture the listed basic class of controlled...

  11. 77 FR 70825 - Manufacturer of Controlled Substances; Notice of Application; Siegfried (USA), LLC

    Science.gov (United States)

    2012-11-27

    ... DEPARTMENT OF JUSTICE Drug Enforcement Administration Manufacturer of Controlled Substances; Notice of Application; Siegfried (USA), LLC Pursuant to Sec. 1301.33(a), Title 21 of the Code of Federal Regulations (CFR), this is notice that on November 5, 2012, Siegfried (USA) LLC, 33 Industrial Park Road...

  12. 78 FR 32458 - Manufacturer of Controlled Substances; Notice of Application; Siegfried USA, LLC

    Science.gov (United States)

    2013-05-30

    ... DEPARTMENT OF JUSTICE Drug Enforcement Administration Manufacturer of Controlled Substances; Notice of Application; Siegfried USA, LLC Pursuant to Sec. 1301.33(a), Title 21 of the Code of Federal Regulations (CFR), this is notice that on April 18, 2013, Siegfried USA, LLC., 33 Industrial Park Road...

  13. Simulation Environment Synchronizing Real Equipment for Manufacturing Cell

    Science.gov (United States)

    Inukai, Toshihiro; Hibino, Hironori; Fukuda, Yoshiro

    Recently, manufacturing industries face various problems such as shorter product life cycle, more diversified customer needs. In this situation, it is very important to reduce lead-time of manufacturing system constructions. At the manufacturing system implementation stage, it is important to make and evaluate facility control programs for a manufacturing cell, such as ladder programs for programmable logical controllers (PLCs) rapidly. However, before the manufacturing systems are implemented, methods to evaluate the facility control programs for the equipment while mixing and synchronizing real equipment and virtual factory models on the computers have not been developed. This difficulty is caused by the complexity of the manufacturing system composed of a great variety of equipment, and stopped precise and rapid support of a manufacturing engineering process. In this paper, a manufacturing engineering environment (MEE) to support manufacturing engineering processes using simulation technologies is proposed. MEE consists of a manufacturing cell simulation environment (MCSE) and a distributed simulation environment (DSE). MCSE, which consists of a manufacturing cell simulator and a soft-wiring system, is emphatically proposed in detail. MCSE realizes making and evaluating facility control programs by using virtual factory models on computers before manufacturing systems are implemented.

  14. Metal pollution investigation of Goldman Park, Middletown Ohio: Evidence for steel and coal pollution in a high child use setting.

    Science.gov (United States)

    Dietrich, Matthew; Huling, Justin; Krekeler, Mark P S

    2018-03-15

    A geochemical investigation of both ballfield sediment and street sediment in a park adjacent to a major steel manufacturing site in Middletown, Ohio revealed Pb, Cu, Cr and Zn exceeded background levels, but in heterogeneous ways and in varying levels of health concern. Pb, Sn, and Zn had geoaccumulation values>2 (moderate to heavy pollutants) in street sediment samples. Cr had a geoaccumulation value>1, while Ni, W, Fe and Mn had geoaccumulation values between 1 and 0 in street sediment. Street sediment contamination factors for respective elements are Zn (10.41), Sn (5.45), Pb (4.70), Sb (3.45), Cr (3.19), W (2.59), and Mn (2.43). The notable elements with the highest factors for ball fields are Zn (1.72), Pb (1.36), Cr (0.99), V (0.95), and Mn (1.00). High correlation coefficients of known constituents of steel, such as Fe and Mo, Ni and Cr, W and Co, W and V, as well as particulate steel and coal spherule fragments found by SEM suggest probable sourcing of some of the metals from the AK Steel facility directly adjacent to the park. However, overall extensive heterogeneity of metal pollutants in the area points to the difficulties in sourcing pollutant metals, with many outside sources likely contributing as well. This study demonstrates that different sediment media can be impacted by significantly different metal pollutants even when in very close proximity to a single source and points to unrecognized complexity in urban pollution processes in the region. This study pertains to large-scale regional importance, as Middletown, Ohio is indicative of a typical post-industrial Midwestern U.S. city where limited investigation has been conducted regarding urban pollution and sourcing of materials. Copyright © 2017 Elsevier B.V. All rights reserved.

  15. Energetics Manufacturing Technology Center (EMTC)

    Data.gov (United States)

    Federal Laboratory Consortium — The Energetics Manufacturing Technology Center (EMTC), established in 1994 by the Office of Naval Research (ONR) Manufacturing Technology (ManTech) Program, is Navy...

  16. Thermal modelling of extrusion based additive manufacturing of composite materials

    DEFF Research Database (Denmark)

    Jensen, Mathias Laustsen; Sonne, Mads Rostgaard; Hattel, Jesper Henri

    One of the hottest topics regarding manufacturing these years is additive manufacturing (AM). AM is a young branch of manufacturing techniques, which by nature is disruptive due to its completely different manufacturing approach, wherein material is added instead of removed. By adding material...... layer by layer, mould and customised tooling requirements from the conventional manufacturing are reduced or removed, which leads to increased customisation options and enables new part complexities without increasing the manufacturing cost. AM hence enables customised small volume productions...... of composite parts not feasible by conventional manufacturing techniques. This sets up new requirements to the part verification and validation, while conventional destructive tests become too expensive. This initial study aims to investigate alternative options to this destructive testing by increasing...

  17. Museums as Theme Parks - A Possible Marketing Approach?

    Directory of Open Access Journals (Sweden)

    Alexandra ZBUCHEA

    2015-09-01

    Full Text Available Museums compete increasingly more with very diverse entertainment providers, such as theme parks, despite the fact that their offer is mainly cultural. Museums have had to be more active and they have had to diversify their offer, in order to be more popular, therefore to better achieve their complex cultural missions. They should be more “market oriented” and aim to develop their programs according with their visitors’ needs and desires, as well as with the evolutions in the contemporary society.  One answer to this challenge would be the controversial theme parkisation of museums. The paper discusses in what extent the market approach of theme parks could be a viable marketing strategy for museums. It underlines several differences and similarities between the marketing approaches of museums and theme parks, in order to better understand how a museum could preserve its cultural functions, while obtaining economic success. Only the latter would allow it to better develop its cultural activity and thus to better serve its visitors and the community.

  18. Protected Area Tourism in a Changing Climate: Will Visitation at US National Parks Warm Up or Overheat?

    Science.gov (United States)

    Fisichelli, Nicholas A; Schuurman, Gregor W; Monahan, William B; Ziesler, Pamela S

    2015-01-01

    Climate change will affect not only natural and cultural resources within protected areas but also tourism and visitation patterns. The U.S. National Park Service systematically collects data regarding its 270+ million annual recreation visits, and therefore provides an opportunity to examine how human visitation may respond to climate change from the tropics to the polar regions. To assess the relationship between climate and park visitation, we evaluated historical monthly mean air temperature and visitation data (1979-2013) at 340 parks and projected potential future visitation (2041-2060) based on two warming-climate scenarios and two visitation-growth scenarios. For the entire park system a third-order polynomial temperature model explained 69% of the variation in historical visitation trends. Visitation generally increased with increasing average monthly temperature, but decreased strongly with temperatures > 25°C. Linear to polynomial monthly temperature models also explained historical visitation at individual parks (R2 0.12-0.99, mean = 0.79, median = 0.87). Future visitation at almost all parks (95%) may change based on historical temperature, historical visitation, and future temperature projections. Warming-mediated increases in potential visitation are projected for most months in most parks (67-77% of months; range across future scenarios), resulting in future increases in total annual visits across the park system (8-23%) and expansion of the visitation season at individual parks (13-31 days). Although very warm months at some parks may see decreases in future visitation, this potential change represents a relatively small proportion of visitation across the national park system. A changing climate is likely to have cascading and complex effects on protected area visitation, management, and local economies. Results suggest that protected areas and neighboring communities that develop adaptation strategies for these changes may be able to both

  19. Calcite/aragonite-biocoated artificial coral reefs for marine parks

    Directory of Open Access Journals (Sweden)

    Volodymyr Ivanov

    2017-08-01

    Full Text Available Natural formation of the coral reefs is complicated by slow biomediated precipitation of calcium carbonate from seawater. Therefore, manufactured artificial coral reefs can be used for the formation of “underwater gardens” in marine parks for the recreational fishing and diving that will protect natural coral reefs from negative anthropogenic effects. Additionally, the coating of the concrete, plastic or wooden surfaces of artificial coral reef with calcium carbonate layer could promote attachment and growth of coral larvae and photosynthetic epibiota on these surfaces. Three methods of biotechnological coating of the artificial coral reefs have been tested: (1 microbially induced calcium carbonate precipitation from concentrated calcium chloride solution using live bacterial culture of Bacillus sp. VS1 or dead but urease-active cells of Yaniella sp. VS8; (2 precipitation from calcium bicarbonate solution; (3 precipitation using aerobic oxidation of calcium acetate by bacteria Bacillus ginsengi strain VSA1. The thickness of biotechnologically produced calcium carbonate coating layer was from 0.3 to 3 mm. Biocoating using calcium salt and urea produced calcite in fresh water and aragonite in seawater. The calcium carbonate-coated surfaces were colonized in aquarium with seawater and hard corals as inoculum or in aquarium with fresh water using cyanobacteria Chlorella sorokiana as inoculum. The biofilm on the light-exposed side of calcium carbonate-coated surfaces was formed after six weeks of incubation and developed up to the average thickness of 250 µm in seawater and about 150 µm in fresh water after six weeks of incubation. The biotechnological manufacturing of calcium carbonate-coated concrete, plastic, or wooden surfaces of the structures imitating natural coral reef is technologically feasible. It could be commercially attractive solution for the introduction of aesthetically pleasant artificial coral reefs in marine parks and

  20. Big Area Additive Manufacturing of High Performance Bonded NdFeB Magnets

    NARCIS (Netherlands)

    Li, L; Tirado, A.; Nlebedim, I.C.; Rios, O.; Post, B.; Kunc, V.; Lowden, R.R.; Lara-Curzio, E.; Fredette, R.; Ormerod, J.; Lograsso, T.A.; Paranthaman, M.P.

    2016-01-01

    Additive manufacturing allows for the production of complex parts with minimum material waste, offering an effective technique for fabricating permanent magnets which frequently involve critical rare earth elements. In this report, we demonstrate a novel method - Big Area Additive Manufacturing

  1. Analysis on Time Window of Shared Parking in Hospitals Based on Parking Behaviors

    Directory of Open Access Journals (Sweden)

    Qin Chen

    2017-01-01

    Full Text Available Hospitals are essential components of a city; huge traffic demand is generated and attracted, causing contradiction between parking supply and demand. By sharing parking berths, limited space can serve more demand which is beneficial to alleviating parking problems. Aimed at improving the capacity of shared parking, the paper analyzes four parking groups in typical hospitals, which are medical staff, outpatients, emergency patients, and visiting groups. The parking demand of medical staff is rigid. For outpatients and visiting groups, longer walking distance is acceptable and more attention is paid to parking fee. By contrast, emergency patients can accept shorter walking distance and focus more on convenience due to urgency. Under this circumstance, parking behaviors selection models are established by means of Multinomial Logit Model. On this basis, time value is adopted to calculate the tolerance of alterative parking time. Moreover, this paper explores the variation of time window, under different parking impedance. A case study is conducted and suggests that start and end point of a certain time window can be influenced by external factors.

  2. Ecological planning proposal for Kruger National Park

    Science.gov (United States)

    van Riet, W. F.; Cooks, J.

    1990-05-01

    This article discusses an application of the ecological planning model proposed by Van Riet and Cooks. The various steps outlined in this model have been applied to Kruger National Park in South Africa. The natural features of Kruger National Park, which form the basis of such an ecological planning exercise and from which the various land use categories, values, and zoning classes can be determined, are discussed in detail. The suitability of each of the various features is analyzed and a final zoning proposal for Kruger National Park is suggested. Furthermore a method for selecting a site for a new camp is illustrated by referring to the site for the new Mopane rest camp which is now under construction in the Kruger National Park. The conclusion is reached that the proposed ecological planning model can be used successfully in planning conservation areas such as Kruger National Park and for the selection of the most desirable sites for the establishment of new rest camps. Its suitability as a practical model in such planning exercises is proven by the fact that the siting proposals of two new camps based on this model have been accepted by the National Parks Board, the controlling body of Kruger National Park.

  3. Additive Manufacturing of Fuel Injectors

    Energy Technology Data Exchange (ETDEWEB)

    Sadek Tadros, Dr. Alber Alphonse [Edison Welding Institute, Inc., Columbus, OH (United States); Ritter, Dr. George W. [Edison Welding Institute, Inc., Columbus, OH (United States); Drews, Charles Donald [Edison Welding Institute, Inc., Columbus, OH (United States); Ryan, Daniel [Solar Turbines Inc., San Diego, CA (United States)

    2017-10-24

    Additive manufacturing (AM), also known as 3D-printing, has been shifting from a novelty prototyping paradigm to a legitimate manufacturing tool capable of creating components for highly complex engineered products. An emerging AM technology for producing metal parts is the laser powder bed fusion (L-PBF) process; however, industry manufacturing specifications and component design practices for L-PBF have not yet been established. Solar Turbines Incorporated (Solar), an industrial gas turbine manufacturer, has been evaluating AM technology for development and production applications with the desire to enable accelerated product development cycle times, overall turbine efficiency improvements, and supply chain flexibility relative to conventional manufacturing processes (casting, brazing, welding). Accordingly, Solar teamed with EWI on a joint two-and-a-half-year project with the goal of developing a production L-PBF AM process capable of consistently producing high-nickel alloy material suitable for high temperature gas turbine engine fuel injector components. The project plan tasks were designed to understand the interaction of the process variables and their combined impact on the resultant AM material quality. The composition of the high-nickel alloy powders selected for this program met the conventional cast Hastelloy X compositional limits and were commercially available in different particle size distributions (PSD) from two suppliers. Solar produced all the test articles and both EWI and Solar shared responsibility for analyzing them. The effects of powder metal input stock, laser parameters, heat treatments, and post-finishing methods were evaluated. This process knowledge was then used to generate tensile, fatigue, and creep material properties data curves suitable for component design activities. The key process controls for ensuring consistent material properties were documented in AM powder and process specifications. The basic components of the project

  4. THE COMPETITIVENESS FACTORS OF INDUSTRIAL PARKS

    Directory of Open Access Journals (Sweden)

    Kóródi László

    2014-07-01

    Full Text Available 2013 Romania shows the bigger economic development than in the last years and increases the GDP by 3,5%, that was the most significant growth in the EU. The biggest contributing sector to this expansion is the industry. This sector contributed the most with 2,3% to this growth. The importance of the industry in a country’s development not only the Romania`s case, but for other economies too. More and more authors emphasise the importance of Industrial parks, they act as pull factors. The effects of the industrial placements like the industrial parks are multiple regarding a region’s development and competitiveness. The most of these benefits are well known already, but the competitiveness of the industrial parks is not a frequent theme, tough this will contribute to the competitiveness of the region. What are the basic and decisive factors that influence the final decision of the companies to choose a particular industrial park? While analysing the competitiveness factors of industrial parks I intend to emphasize the reasons and factors that influences companies in their decision to appear in the industrial parks that they are resident in. The purpose of this paper is to present all the important factors in the same place that make an industrial park competitive. First I want to present the factors that were identified by now based on theoretical, and practical experiences starting from some second hand information. The caracteristics of the successful parks will br presented with the well-kown examples, and also with caese not known to everybody. Some of the reasons why industrial companies chooses a park are well kown, for example the placement, the good accesibility, for which is essential a good infrastructure. Another decisive factor is the suport of the state and the local autorities, the most important factors are tax and other costs relief. There are more things that influance companies in choosing their sites.

  5. An intelligent hybrid scheme for optimizing parking space: A Tabu metaphor and rough set based approach

    Directory of Open Access Journals (Sweden)

    Soumya Banerjee

    2011-03-01

    Full Text Available Congested roads, high traffic, and parking problems are major concerns for any modern city planning. Congestion of on-street spaces in official neighborhoods may give rise to inappropriate parking areas in office and shopping mall complex during the peak time of official transactions. This paper proposes an intelligent and optimized scheme to solve parking space problem for a small city (e.g., Mauritius using a reactive search technique (named as Tabu Search assisted by rough set. Rough set is being used for the extraction of uncertain rules that exist in the databases of parking situations. The inclusion of rough set theory depicts the accuracy and roughness, which are used to characterize uncertainty of the parking lot. Approximation accuracy is employed to depict accuracy of a rough classification [1] according to different dynamic parking scenarios. And as such, the hybrid metaphor proposed comprising of Tabu Search and rough set could provide substantial research directions for other similar hard optimization problems.

  6. Emerging technologies in arthroplasty: additive manufacturing.

    Science.gov (United States)

    Banerjee, Samik; Kulesha, Gene; Kester, Mark; Mont, Michael A

    2014-06-01

    Additive manufacturing is an industrial technology whereby three-dimensional visual computer models are fabricated into physical components by selectively curing, depositing, or consolidating various materials in consecutive layers. Although initially developed for production of simulated models, the technology has undergone vast improvements and is currently increasingly being used for the production of end-use components in various aerospace, automotive, and biomedical specialties. The ability of this technology to be used for the manufacture of solid-mesh-foam monolithic and coated components of complex geometries previously considered unmanufacturable has attracted the attention of implant manufacturers, bioengineers, and orthopedic surgeons. Currently, there is a paucity of reports describing this fabrication method in the orthopedic literature. Therefore, we aimed to briefly describe this technology, some of the applications in other orthopedic subspecialties, its present use in hip and knee arthroplasty, and concerns with the present form of the technology. As there are few reports of clinical trials presently available, the true benefits of this technology can only be realized when studies evaluating the clinical and radiographic outcomes of cementless implants manufactured with additive manufacturing report durable fixation, less stress shielding, and better implant survivorship. Nevertheless, the authors believe that this technology holds great promise and may potentially change the conventional methods of casting, machining, and tooling for implant manufacturing in the future. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

  7. Composite fuselage crown panel manufacturing technology

    Science.gov (United States)

    Willden, Kurtis; Metschan, S.; Grant, C.; Brown, T.

    1992-01-01

    Commercial fuselage structures contain significant challenges in attempting to save manufacturing costs with advanced composite technology. Assembly issues, material costs, and fabrication of elements with complex geometry are each expected to drive the cost of composite fuselage structures. Boeing's efforts under the NASA ACT program have pursued key technologies for low-cost, large crown panel fabrication. An intricate bond panel design and manufacturing concepts were selected based on the efforts of the Design Build Team (DBT). The manufacturing processes selected for the intricate bond design include multiple large panel fabrication with the Advanced Tow Placement (ATP) process, innovative cure tooling concepts, resin transfer molding of long fuselage frames, and utilization of low-cost material forms. The process optimization for final design/manufacturing configuration included factory simulations and hardware demonstrations. These efforts and other optimization tasks were instrumental in reducing cost by 18 percent and weight by 45 percent relative to an aluminum baseline. The qualitative and quantitative results of the manufacturing demonstrations were used to assess manufacturing risks and technology readiness.

  8. Resistance welding equipment manufacturing capability for exports

    Energy Technology Data Exchange (ETDEWEB)

    Sastry, V.S.; Raju, Y.S.; Somani, A.K.; Setty, D.S.; Rameswara Raw, A.; Hermantha Rao, G.V.S.; Jayaraj, R.N. [Nuclear Fuel Complex, Dept. of Atomic Energy, Hyderbad (India)

    2010-07-01

    Indian Pressurised Heavy Water Reactor (PHWR) fuel bundle is fully welded and is unique in its design. Appendage welding, end closure welding, and end plate welding is carried out using resistance welding technique. Out of many joining processes available, resistance-welding process is reliable, environment friendly and best suitable for mass production applications. Nuclear Fuel Complex (NFC), an industrial unit is established in Hyderabad, under the aegis of the Dept of Atomic Energy to manufacture fuel for Pressurised Heavy Water Reactors. From inception, NFC has given importance for self-reliance and indigenization with respect to manufacturing process and equipment. Sintering furnaces, centreless grinders, appendage-welding machines, end-closure welding equipment and end-plate welding equipments, which were initially imported, are either indigenized or designed and manufactured in house. NFC has designed, manufactured a new appendage-welding machine for manufacturing 37 element fuel bundles. Recently NFC has bagged an order from IAEA through international bidding for design, manufacture, supply, erection and commissioning of end-closure welding equipment. The paper gives in detail the salient features of these welding equipment. (author)

  9. Acquiring energy savings in manufactured housing

    International Nuclear Information System (INIS)

    Davey, D.

    1993-01-01

    In 1991, the Northwest utilities faced a complex situation. They needed new sources of electrical power to avoid future deficits. A significant block of energy savings was available in the manufactured housing sector in the form of energy savings from increased insulation to new manufactured homes. The manufacturers were interested in saving the electricity in the homes, but would only deal with the utility sector as a whole. Half of the homes targeted were sited in investor-owned utility (IOU) service territories, and half in the public sector made up of utilities that purchased some or all of their electricity from the Bonneville Power Administration. Utilities agreed to acquire energy from manufacturers In the form of thermal efficiency measures specified by the Bonneville Power Administration. The program that resulted from over one year of negotiations was called the Manufactured Housing Acquisition Program, or MAP. Manufacturers, the utilities, State Energy Offices, the Northwest Power Planning Council and Bonneville all worked closely and with tenacity to build the program that went into effect on April 1, 1992, and should save the region between 7 and 9 megawatts, enough energy to supply 11,000 homes in the Northwest

  10. DECOMPOSITION OF MANUFACTURING PROCESSES: A REVIEW

    Directory of Open Access Journals (Sweden)

    N.M.Z.N. Mohamed

    2012-06-01

    Full Text Available Manufacturing is a global activity that started during the industrial revolution in the late 19th century to cater for the large-scale production of products. Since then, manufacturing has changed tremendously through the innovations of technology, processes, materials, communication and transportation. The major challenge facing manufacturing is to produce more products using less material, less energy and less involvement of labour. To face these challenges, manufacturing companies must have a strategy and competitive priority in order for them to compete in a dynamic market. A review of the literature on the decomposition of manufacturing processes outlines three main processes, namely: high volume, medium volume and low volume. The decomposition shows that each sub process has its own characteristics and depends on the nature of the firm’s business. Two extreme processes are continuous line production (fast extreme and project shop (slow extreme. Other processes are in between these two extremes of the manufacturing spectrum. Process flow patterns become less complex with cellular, line and continuous flow compared with jobbing and project. The review also indicates that when the product is high variety and low volume, project or functional production is applied.

  11. On park design : looking beyond the wars

    OpenAIRE

    Oneka, M.

    1996-01-01


    The present book opens with an account of a buffalo hunt in the company of soldiers in one of the national parks in Uganda. One buffalo was hit close to the heart but fled away as if it was not fatally wounded. The soldiers seeing it flee, fired more rounds of ammunition at it until, with limbs broken, the buffalo fell down. This account is used to demonstrate some of the ravages of wars on parks. It is argued that most parks around the world are destined to perish because of defec...

  12. Sound and noise in urban parks

    OpenAIRE

    António P. O. Carvalho; Ricardo A. F. Cleto

    2012-01-01

    The main goal of this work is to study the soundscape of city gardens and urban parks using a sample of ten sites in Oporto, Portugal to analyze their soundscape through the acoustic characterization of the park's exterior and interior noise levels (LAeq, LA10, LA50 and LA90) and by a socio-acoustic survey to the visitors to check their perception of acoustic quality. The measurements showed gardens/parks with interior noise levels from 47 to 61 dB(A) (with exterior noise levels up to 67 dB(A...

  13. NURE and the National Park Service

    International Nuclear Information System (INIS)

    Weaver, T.A.

    1979-01-01

    Under the National Resource Evaluation (NURE), massive amounts of geological, geochemical, and geophysical data, covering the entire conterminous 48 states and Alaska, are being collected and made public. In addition to NURE goals, these data are applicable to various other researches on and in the vicinity of lands controlled by the National Park Service. Airborne geophysical and hydrogeochemical survey NURE data have been made public for the majority of the area in the combined Mt. McKinley National Park and Denali National Monument. Besides indicating potential raw material deposits, these data are also useful for geologic mapping, water quality, pollution and othe geological, biological, and environmental studies in the park

  14. Spatial analysis related to the location characteristics of park supply. Case study: Music Park and Pendawa Park, Bandung City, Indonesia

    Science.gov (United States)

    Malik, A.; Akbar, R.; Maryati, S.; Natalivan, P.

    2018-05-01

    Public space plays a role in defining the character of a city and is a valuable asset for a city and one of the indicators in assessing whether a city is considered successful or not. In the context of urban sociology, high-quality public spaces with well-maintained environments can improve the quality of the heterogeneous life of urban social communities by creating economic, social, or environmental value-added. Urban societies tend to be heterogeneous, individualistic, and characterized by high competition that often causes conflicts. Another reason for conflicts is the relatively high social differentiation because of the level of religious differences, customs, languages, and sociocultural aspects brought by immigrants from various regions. In the context of space, the city is a system that does not stand alone because internally the city is a unified system of functional activities in it. Meanwhile, externally, the city is influenced by its surrounding environment. As part of the public space, park has an important role in the environmental, aesthetic, recreational, psychological, social, educational, and economic aspects of the city. Public space can be understood as open spaces in urban areas, where everyone regardless their interests and backgrounds can be intersectional and have social contact and serve as an “urban regenerator” including educational functions through innovation and technological intervention. Moreover, park can also absorb carbon dioxide emissions, produce oxygen, improve air and water quality, regulate the microclimate, reduce noise, protect soil and water, and maintain biodiversity. However, many things cause the function of parks to decrease. One reason relates to the distribution of parks related to the characteristics of their location. Research has not seen many studies on the characteristics of locations in the planning of public space. The provision of public space should consider these location characteristics. This study

  15. Implementation of hierarchical design for manufacture rules in manufacturing processes

    OpenAIRE

    Parvez, Masud

    2008-01-01

    In order to shorten the product development cycle time, minimise overall cost and smooth transition into production, early consideration of manufacturing processes is important. Design for Manufacture (DFM) is the practice of designing products with manufacturing issues using an intelligent system, which translates 3D solid models into manufacturable features. Many existing and potential applications, particularly in the field of manufacturing, require various aspects of features technology. ...

  16. Fitness Parks: A Comparative Study of the Components of Jakarta-Manila Parks and their Responsiveness to Support Physical Activities

    Science.gov (United States)

    Fontanoza, Franklin S., Jr.; Navarra, Nappy L.; Engg, D.

    2017-10-01

    Fitness has become more popular due to the cultural phenomenon that being fit can enhance one’s perception of beauty. The sprouting of various outlets for physical activity such as bodybuilding gyms that cater to weightlifting, outdoor group dance classes, sports camps and cause-oriented marathons can be noticed in numerous parts of the world. But slowly its concept, that being fit is a mere physical representation of beauty, is shifting into a more health-oriented consciousness. Annual reports have shown that coronary heart disease is still in the top rank of the death causes in the world. This information has led more people to protect their health through several lifestyle improvements, with regular exercise being one of these methods to achieve health goals. Its numerous benefits range from the lowering of blood pressure, heightened learning capacity to the improvement of mood. The health-rooted awareness of the need for physical activities to support one’s daily requirement has spread worldwide and has now been recognized by a lot of people. Parks are usually designed with amenities such as playgrounds, pathways and wide open spaces where people from all walks of life convene, interact with each other and do various physical activities. With this in mind, the capacity of parks to host such activities has to be studied to determine which components do people who engage in active healthy lifestyles find highly attractive and usable. An analysis of such could lead to effective space programming of our local neighborhood parks making it more perceptive to the physical needs of the people. Two major sports complexes from South East Asia have been used as case studies to assess the responsiveness of the locals to the amenities offered in each complex to address health goals. The comparison revealed that the Gelora Bung Karno Complex in Jakarta, Indonesia has more activity-oriented amenities and longer operating hours, making it more receptive to meet the

  17. Additive manufacturing in production: challenges and opportunities

    Science.gov (United States)

    Ahuja, Bhrigu; Karg, Michael; Schmidt, Michael

    2015-03-01

    Additive manufacturing, characterized by its inherent layer by layer fabrication methodology has been coined by many as the latest revolution in the manufacturing industry. Due to its diversification of Materials, processes, system technology and applications, Additive Manufacturing has been synonymized with terminology such as Rapid prototyping, 3D printing, free-form fabrication, Additive Layer Manufacturing, etc. A huge media and public interest in the technology has led to an innovative attempt of exploring the technology for applications beyond the scope of the traditional engineering industry. Nevertheless, it is believed that a critical factor for the long-term success of Additive Manufacturing would be its ability to fulfill the requirements defined by the traditional manufacturing industry. A parallel development in market trends and product requirements has also lead to a wider scope of opportunities for Additive Manufacturing. The presented paper discusses some of the key challenges which are critical to ensure that Additive Manufacturing is truly accepted as a mainstream production technology in the industry. These challenges would highlight on various aspects of production such as product requirements, process management, data management, intellectual property, work flow management, quality assurance, resource planning, etc. In Addition, changing market trends such as product life cycle, mass customization, sustainability, environmental impact and localized production will form the foundation for the follow up discussion on the current limitations and the corresponding research opportunities. A discussion on ongoing research to address these challenges would include topics like process monitoring, design complexity, process standardization, multi-material and hybrid fabrication, new material development, etc.

  18. Robust Manufacturing Control

    CERN Document Server

    2013-01-01

    This contributed volume collects research papers, presented at the CIRP Sponsored Conference Robust Manufacturing Control: Innovative and Interdisciplinary Approaches for Global Networks (RoMaC 2012, Jacobs University, Bremen, Germany, June 18th-20th 2012). These research papers present the latest developments and new ideas focusing on robust manufacturing control for global networks. Today, Global Production Networks (i.e. the nexus of interconnected material and information flows through which products and services are manufactured, assembled and distributed) are confronted with and expected to adapt to: sudden and unpredictable large-scale changes of important parameters which are occurring more and more frequently, event propagation in networks with high degree of interconnectivity which leads to unforeseen fluctuations, and non-equilibrium states which increasingly characterize daily business. These multi-scale changes deeply influence logistic target achievement and call for robust planning and control ...

  19. A geologic guide to Wrangell-Saint Elias National Park and Preserve, Alaska; a tectonic collage of northbound terranes

    Science.gov (United States)

    Winkler, Gary R.; with contributions by MacKevett, E. M.; Plafker, George; Richter, D.H.; Rosenkrans, D.S.; Schmoll, H.R.

    2000-01-01

    Wrangell-Saint Elias National Park and Preserve, the largest unit in the U.S. National Park System, encompasses near 13.2 million acres of geological wonderments. This geologic guide presents history of exploration and Earth-science investigation; describes the complex geologic makeup; characterizes the vast college of accretion geologic terranes in this area of Alaska's continental margin; recapitulates the effects of earthquakes, volcanoes, and glaciers; characterizes the copper and gold resources of the parklands; and describes outstanding locales within the park and preserve area. A glossary of geologic terms and a categorized list of additional sources of information complete this report.

  20. Flexibility in fuel manufacturing

    International Nuclear Information System (INIS)

    Reparaz, A.; Stavig, W.E.; McLees, R.B.

    1987-01-01

    From its inception Exxon Nuclear has produced both BWR and PWR fuels. This is reflected in a product line that, to date, includes over 20 fuel designs. These range from 6x6 design at one end of the spectrum to the recently introduced 17x17 design. The benefits offered include close tailoring of the fuel design to match the customer's requirements, and the ability to rapidly introduce product changes, such as the axial blanket design, with a minimal impact on manufacturing. This flexibility places a number of demands on the manufacturing organization. Close interfaces must be established, and maintained, between the marketing, product design, manufacturing, purchasing and quality organizations, and the information flows must be immediate and accurate. Production schedules must be well planned and must be maintained or revised to reflect changing circumstances. Finally, the manufacturing facilities must be designed to allow rapid switchover between product designs with minor tooling changes and/or rerouting of product flows to alternate work stations. Among the tools used to manage the flow of information and to maintain the tight integration necessary between the various manufacturing, engineering and quality organizations is a commercially available, computerized planning and tracking system, AMAPS. A real-time production data collection system has been designed which gathers data from each production work station for use by the shop floor control module of AMAPS. Accuracy of input to the system is improved through extensive use of bar codes to gather information on the product as it moves through and between work stations. This computerized preparation of material tracing has an impact on direct manufacturing records, quality control records, nuclear material records and accounting and inventory records. This is of benefit to both Exxon Nuclear and its customers

  1. Parking Space Detection and Trajectory Tracking Control for Vehicle Auto-Parking

    OpenAIRE

    Shiuh-Jer Huang; Yu-Sheng Hsu

    2017-01-01

    On-board available parking space detecting system, parking trajectory planning and tracking control mechanism are the key components of vehicle backward auto-parking system. Firstly, pair of ultrasonic sensors is installed on each side of vehicle body surface to detect the relative distance between ego-car and surrounding obstacle. The dimension of a found empty space can be calculated based on vehicle speed and the time history of ultrasonic sensor detecting information. This result can be u...

  2. Diccionario Lean Manufacturing

    OpenAIRE

    Muñoz Ellner, Sarah María

    2016-01-01

    El Diccionario Bilingüe de Lean Manufacturing pretende ser un instrumento de apoyo a todo aquel que tenga la responsabilidad de planear, ejecutar o simplemente algún interés con las actividades de Lean Manufacturing, aportando así también conceptos claros tanto en castellano como en inglés, con el fin de entender de forma integral el alcance mismo que puede llegar a tener dicha filosofía, al igual que se proporcionara una serie de siglas y herramientas para la implementación del Lean Manufact...

  3. Concept of Lunar Energy Park

    Science.gov (United States)

    Niino, Masayuki; Kisara, Katsuto; Chen, Lidong

    1993-10-01

    This paper presents a new concept of energy supply system named Lunar Energy Park (LEP) as one of the next-generation clean energy sources. In this concept, electricity is generated by nuclear power plants built on the moon and then transmitted to receiving stations on the earth by laser beam through transporting systems situated in geostationary orbit. The lunar nuclear power plants use a high-efficiency composite energy conversion system consisting of thermionic and thermoelectric generators to change nuclear thermal energy into electricity directly. The nuclear resources are considered to be available from the moon, and nuclear fuel transport from earth to moon is not necessary. Because direct energy conversion systems are employed, the lunar nuclear plants can be operated and controlled by robots and are maintenance-free, and so will cause no pollution to humans. The key technologies for LEP include improvements of conversion efficiency of both thermionic and thermoelectric converters, and developments of laser-beam power transmission technology as well. The details, including the construction of lunar nuclear plants, energy conversion and energy transmission systems, as well as the research plan strategies for this concept are reviewed.

  4. Commercial truck parking and other safety issues.

    Science.gov (United States)

    2015-10-01

    Commercial truck parking is a safety issue, since trucks are involved in approximately 10% of all fatal accidents on interstates and : parkways in Kentucky. Drivers experience schedule demands and long hours on the road, yet they cannot easily determ...

  5. Motorcycle noise in a park environment

    Science.gov (United States)

    2013-06-01

    The Blue Ridge Parkway National Park provided an environment where sound level : measurements could be made for numerous motorcycle pass-by events. Data were examined : for five motorcycle categories: cruiser, sport, dual purpose, touring, and : mope...

  6. Freshwater fishes of Tsitsikamma National Park

    Directory of Open Access Journals (Sweden)

    I.A. Russell

    2002-12-01

    Full Text Available This study aimed to determine the distribution and relative abundance of freshwater fishes in the Tsitsikamma National Park. Fish assemblages in six river systems were sampled in 2001, with a total of 323 fish from eight species recorded. Indigenous fish collected included four freshwater species (Pseudobarbus afer, Pseudobarbus tenuis, Sandelia capensis, Anguilla mossambica, three estuarine species (Monodactylus falciformis, Caffrogobius gilchristi, Myxus capensis, and one alien (Micropterus salmoides. One additional indigenous species (Galaxias zebratus and two aliens (Salmo trutta, Oncorhynchus mykiss could potentially occur within the park. The topography and locality of the park presents a unique opportunity to meaningfully conserve the endangered P. tenuis as well as other fish characteristic of the eastern reaches of the Cape Floristic Region. Management action is required to minimise opportunities for further establishment and spread of alien fish species and to conserve indigenous fish assemblages within the park.

  7. Educating for biodiversity conservation in urban parks

    Directory of Open Access Journals (Sweden)

    Guerra, M. C.

    2014-01-01

    Full Text Available This article is intended to propose a procedure for learning about biodiversity in urban parks, as a contribution for educating conservation of natural resources. The procedure was named “Diagnosis of biodiversity conservation status in urban parks”. It comprises for stages describing the physic, geographic, socio-historic, and cultural study of the park as well as a taxonomic inventory of species, its distribution, presence in Cuba, and menaces they are subjected to. This facilitates to carry out educative activities. The introduction of the procedure is thought of from an ethno-biological and interdisciplinary perspective for training students in biological, geographical, historical, cultural and ethnological procedures, seeking a holistic approach to environment. The effectiveness of the proposal was appraised by accounting the experience of a class at “Casino Campestre” park in Camagüey City. Key words: biodiversity, urban parks, procedures, conservation training

  8. Park asendas Manhattanil logistika / Rivo Sarapik

    Index Scriptorium Estoniae

    Sarapik, Rivo, 1981-

    2010-01-01

    New Yorgis Manhattani edelaosas rajati vanale raudteele, kümne meetri kõrgusele tänava kohale High Line Park. Arhitektid: Diller Scotidio + Renfro. New York Times valis pargi 2009. aasta arhitektuurialaste triumfide hulka New York Citys

  9. Renewable Energy Park - Preliminary Feasibility & Engineering Report

    Energy Technology Data Exchange (ETDEWEB)

    Ariwite, Roderick [Fallon Paiute Shoshone Tribe, NV (United States)

    2015-07-31

    This "Renewable Energy Park - Preliminary Feasibility & Engineering Report" seeks to provide an overall assessment and review of renewable energy development opportunities on the Fallon Indian Reservation and Colony Lands.

  10. Cal State Park Boundaries 2011/2012

    Data.gov (United States)

    California Natural Resource Agency — This is a GIS version of California State Park (CSP) operational boundaries and does not represent official property boundary determinations. This GIS version is...

  11. Big Bend National Park: Acoustical Monitoring 2010

    Science.gov (United States)

    2013-06-01

    During the summer of 2010 (September October 2010), the Volpe Center collected baseline acoustical data at Big Bend National Park (BIBE) at four sites deployed for approximately 30 days each. The baseline data collected during this period will he...

  12. Minnesota State Park Trails and Roads

    Data.gov (United States)

    Minnesota Department of Natural Resources — This shapefile covers the trails in the State of Minnesota Parks, Recreation Areas, and Waysides as designated through legislation and recognized by the Department...

  13. Systems engineering management process maturity of South African manufacturing organisations

    CSIR Research Space (South Africa)

    Lemberger, ID

    2014-07-01

    Full Text Available to integrate people, processes and technologies to deliver innovative complex systems. The investigation set out to improve the understanding of systems engineering (SE) with focus on organisations in manufacturing of coke, petroleum, chemical products, rubber...

  14. 36 CFR 7.4 - Grand Canyon National Park.

    Science.gov (United States)

    2010-07-01

    ... point of origin of the tour, will be accorded admission to the park. (b) Colorado whitewater boat trips... conduct of a commercial or business activity in the park. (iii) An operation is commercial if any fee... will not interfere with park management or impair park resources. (i) Any permit issued will be valid...

  15. Vesuvium national park; Il Parco Nazionale del Vesuvio

    Energy Technology Data Exchange (ETDEWEB)

    Iozzolino, I. [Naples Univ. (Italy)

    1995-03-01

    The presented paper deal with the future of Vesuvium National Park. A brief history of the park institution is stated together with geo-physical, floristical, and faunistical aspects. Some considerations are reported about human activities and economic aspects in park area. Furthermore, future problems in park management are pointed out.

  16. Mercury in fishes from 21 national parks in the Western United States: inter- and intra-park variation in concentrations and ecological risk

    Science.gov (United States)

    Eagles-Smith, Collin A.; Willacker, James J.; Flanagan Pritz, Colleen M.

    2014-01-01

    Mercury (Hg) is a global contaminant and human activities have increased atmospheric Hg concentrations 3- to 5-fold during the past 150 years. This increased release into the atmosphere has resulted in elevated loadings to aquatic habitats where biogeochemical processes promote the microbial conversion of inorganic Hg to methylmercury, the bioavailable form of Hg. The physicochemical properties of Hg and its complex environmental cycle have resulted in some of the most remote and protected areas of the world becoming contaminated with Hg concentrations that threaten ecosystem and human health. The national park network in the United States is comprised of some of the most pristine and sensitive wilderness in North America. There is concern that via global distribution, Hg contamination could threaten the ecological integrity of aquatic communities in the parks and the wildlife that depends on them. In this study, we examined Hg concentrations in non-migratory freshwater fish in 86 sites across 21 national parks in the Western United States. We report Hg concentrations of more than 1,400 fish collected in waters extending over a 4,000 kilometer distance, from Alaska to the arid Southwest. Across all parks, sites, and species, fish total Hg (THg) concentrations ranged from 9.9 to 1,109 nanograms per gram wet weight (ng/g ww) with a mean of 77.7 ng/g ww. We found substantial variation in fish THg concentrations among and within parks, suggesting that patterns of Hg risk are driven by processes occurring at a combination of scales. Additionally, variation (up to 20-fold) in site-specific fish THg concentrations within individual parks suggests that more intensive sampling in some parks will be required to effectively characterize Hg contamination in western national parks. Across all fish sampled, only 5 percent had THg concentrations exceeding a benchmark (200 ng/g ww) associated with toxic responses within the fish themselves. However, Hg concentrations in 35 percent

  17. 76 FR 77131 - Special Regulations; Areas of the National Park System, Yellowstone National Park

    Science.gov (United States)

    2011-12-12

    ... FURTHER INFORMATION CONTACT: Steve Iobst, Deputy Superintendent, Yellowstone National Park, (307) 344-2002... material way the economy, productivity, competition, jobs, the environment, public health or safety, or...

  18. A Walk in the Semantic Park

    DEFF Research Database (Denmark)

    Danvy, Olivier; Johannsen, Jacob; Zerny, Ian

    2011-01-01

    To celebrate the 20th anniversary of PEPM, we are inviting you to a walk in the semantic park and to inter-derive reduction-based and reduction-free negational normalization functions.......To celebrate the 20th anniversary of PEPM, we are inviting you to a walk in the semantic park and to inter-derive reduction-based and reduction-free negational normalization functions....

  19. A Taxonomy of Manufacturing Strategies

    OpenAIRE

    Jeffrey G. Miller; Aleda V. Roth

    1994-01-01

    This paper describes the development and analysis of a numerical taxonomy of manufacturing strategies. The taxonomy was developed with standard methods of cluster analysis, and is based on the relative importance attached to eleven competitive capabilities defining the manufacturing task of 164 large American manufacturing business units. Three distinct clusters of manufacturing strategy groups were observed. Though there is an industry effect, all three manufacturing strategy types are obser...

  20. Membrane manufacture for peptide separations

    KAUST Repository

    Kim, Dooli; Salazar Moya, Octavio Ruben; Nunes, Suzana Pereira

    2016-01-01

    Nanostructured polymeric membranes are key tools in biomedical applications such as hemodialysis, protein separations, in the food industry, and drinking water supply from seawater. Despite of the success in different separation processes, membrane manufacture itself is at risk, since the most used solvents are about to be banned in many countries due to environmental and health issues. We propose for the first time the preparation of polyethersulfone membranes based on dissolution in the ionic liquid 1-ethyl-3-methylimidazolium dimethylphosphate ([EMIM]DEP). We obtained a series of membranes tailored for separation of solutes with molecular weight of 30, 5, 1.3, and 1.25 kg mol-1 with respective water permeances of 140, 65, 30 and 20 Lm-2h-1bar-1. We demonstrate their superior efficiency in the separation of complex mixtures of peptides with molecular weights in the range of 800 to 3500 gmol-1. Furthermore, the thermodynamics and kinetics of phase separation leading to the pore formation in the membranes were investigated. The rheology of the solutions and the morphology of the prepared membranes were examed and compared to those of polyethersulfone in organic solvents currently used for membrane manufacture.

  1. Mechanics of additively manufactured biomaterials.

    Science.gov (United States)

    Zadpoor, Amir A

    2017-06-01

    Additive manufacturing (3D printing) has found many applications in healthcare including fabrication of biomaterials as well as bioprinting of tissues and organs. Additively manufactured (AM) biomaterials may possess arbitrarily complex micro-architectures that give rise to novel mechanical, physical, and biological properties. The mechanical behavior of such porous biomaterials including their quasi-static mechanical properties and fatigue resistance is not yet well understood. It is particularly important to understand the relationship between the designed micro-architecture (topology) and the resulting mechanical properties. The current special issue is dedicated to understanding the mechanical behavior of AM biomaterials. Although various types of AM biomaterials are represented in the special issue, the primary focus is on AM porous metallic biomaterials. As a prelude to this special issue, this editorial reviews some of the latest findings in the mechanical behavior of AM porous metallic biomaterials so as to describe the current state-of-the-art and set the stage for the other studies appearing in the issue. Some areas that are important for future research are also briefly mentioned. Copyright © 2017 Elsevier Ltd. All rights reserved.

  2. Membrane manufacture for peptide separations

    KAUST Repository

    Kim, Dooli

    2016-06-07

    Nanostructured polymeric membranes are key tools in biomedical applications such as hemodialysis, protein separations, in the food industry, and drinking water supply from seawater. Despite of the success in different separation processes, membrane manufacture itself is at risk, since the most used solvents are about to be banned in many countries due to environmental and health issues. We propose for the first time the preparation of polyethersulfone membranes based on dissolution in the ionic liquid 1-ethyl-3-methylimidazolium dimethylphosphate ([EMIM]DEP). We obtained a series of membranes tailored for separation of solutes with molecular weight of 30, 5, 1.3, and 1.25 kg mol-1 with respective water permeances of 140, 65, 30 and 20 Lm-2h-1bar-1. We demonstrate their superior efficiency in the separation of complex mixtures of peptides with molecular weights in the range of 800 to 3500 gmol-1. Furthermore, the thermodynamics and kinetics of phase separation leading to the pore formation in the membranes were investigated. The rheology of the solutions and the morphology of the prepared membranes were examed and compared to those of polyethersulfone in organic solvents currently used for membrane manufacture.

  3. Data Analytics for Smart Parking Applications.

    Science.gov (United States)

    Piovesan, Nicola; Turi, Leo; Toigo, Enrico; Martinez, Borja; Rossi, Michele

    2016-09-23

    We consider real-life smart parking systems where parking lot occupancy data are collected from field sensor devices and sent to backend servers for further processing and usage for applications. Our objective is to make these data useful to end users, such as parking managers, and, ultimately, to citizens. To this end, we concoct and validate an automated classification algorithm having two objectives: (1) outlier detection: to detect sensors with anomalous behavioral patterns, i.e., outliers; and (2) clustering: to group the parking sensors exhibiting similar patterns into distinct clusters. We first analyze the statistics of real parking data, obtaining suitable simulation models for parking traces. We then consider a simple classification algorithm based on the empirical complementary distribution function of occupancy times and show its limitations. Hence, we design a more sophisticated algorithm exploiting unsupervised learning techniques (self-organizing maps). These are tuned following a supervised approach using our trace generator and are compared against other clustering schemes, namely expectation maximization, k-means clustering and DBSCAN, considering six months of data from a real sensor deployment. Our approach is found to be superior in terms of classification accuracy, while also being capable of identifying all of the outliers in the dataset.

  4. Data Analytics for Smart Parking Applications

    Directory of Open Access Journals (Sweden)

    Nicola Piovesan

    2016-09-01

    Full Text Available We consider real-life smart parking systems where parking lot occupancy data are collected from field sensor devices and sent to backend servers for further processing and usage for applications. Our objective is to make these data useful to end users, such as parking managers, and, ultimately, to citizens. To this end, we concoct and validate an automated classification algorithm having two objectives: (1 outlier detection: to detect sensors with anomalous behavioral patterns, i.e., outliers; and (2 clustering: to group the parking sensors exhibiting similar patterns into distinct clusters. We first analyze the statistics of real parking data, obtaining suitable simulation models for parking traces. We then consider a simple classification algorithm based on the empirical complementary distribution function of occupancy times and show its limitations. Hence, we design a more sophisticated algorithm exploiting unsupervised learning techniques (self-organizing maps. These are tuned following a supervised approach using our trace generator and are compared against other clustering schemes, namely expectation maximization, k-means clustering and DBSCAN, considering six months of data from a real sensor deployment. Our approach is found to be superior in terms of classification accuracy, while also being capable of identifying all of the outliers in the dataset.

  5. Performance comparison of wind park configurations

    Energy Technology Data Exchange (ETDEWEB)

    Lundberg, Stefan

    2003-07-01

    In this report, layouts of various large-scale wind parks, both AC as well as DC, are investigated. Loss modelling of the wind park components as well as calculations of the energy capture of the turbines using various electrical systems are performed, and the energy production cost of the various park configurations is determined. It was found that from an energy capture point of view, the difference in energy production between various wind turbine systems is very small. In addition, a study of the suitability of various DC/DC-converters is made. Three DC/DC-converters, Boost, Full Bridge and Full Bridge Isolated Boost, are found to be interesting candidates as the 'transformer' component in potential DC-based wind parks. Of all the investigated wind park configurations, the wind park with the series connected DC wind turbines seems to have the best potential to give the lowest energy production cost, if the transmission distance is longer then 10-20 km.

  6. Current situation and countermeasures of port logistics park information construction

    Directory of Open Access Journals (Sweden)

    Zhen Liu

    2013-03-01

    Full Text Available Purpose: Improve work efficiency of logistics park department, and drive the economy of the park and its surrounding areas. Design/methodology/approach: Analyze the information development situation and existent questions of current national logistics park, and design proper scheme to meet the demand of port logistics park. Findings: Proposed an information construction implementation plan using technology of the Internet of things which can be applied to port logistics park. Designed a scheme for the park information construction and explained the system's implementation strategy and implementation steps. Practical implications: The proposed construction program is particularly suitable for the northwest port logistics parks in China, and also has reference function to other logistics park construction. Originality/value: Group the information construction of the logistics park into four levels, three types of users, and two requirements. The scheme is innovative and comprehensive, which can ensure the development of port logistics park.

  7. 75 FR 20859 - Notice of Realty Action, Independence National Historical Park, Pennsylvania and Valley Forge...

    Science.gov (United States)

    2010-04-21

    ... American Revolution. This parcel abuts the Walnut Hill complex of the Park, which contains significant... including your address, phone number, e-mail address, or other personal identifying information in your comment, you should be aware that your entire comment--including your personal identifying information...

  8. Transfer of manufacturing units

    DEFF Research Database (Denmark)

    Madsen, Erik Skov; Riis, Jens Ove; Sørensen, Brian Vejrum

    2008-01-01

    The ongoing and unfolding relocation of activities is one of the major trends, that calls for attention in the domain of operations management. In particular, prescriptive models outlining: stages of the process, where to locate, and how to establish the new facilities have been studied, while...... and dilemmas to be addressed when transferring manufacturing units....

  9. Reusing Old Manufacturing Buildings

    Science.gov (United States)

    Roman, Harry T.

    2014-01-01

    This article presents an interesting design challenge for students, one that will certainly let them integrate subject matter and get a sense of pride for doing something useful in their own community. The author would be willing to bet that the average town or city has some old red brick manufacturing building(s) that have seen much better days.…

  10. Virtual manufacturing in reality

    Science.gov (United States)

    Papstel, Jyri; Saks, Alo

    2000-10-01

    SMEs play an important role in manufacturing industry. But from time to time there is a shortage in resources to complete the particular order in time. Number of systems is introduced to produce digital information in order to support product and process development activities. Main problem is lack of opportunity for direct data transition within design system modules when needed temporary extension of design capacity (virtuality) or to implement integrated concurrent product development principles. The planning experience in the field is weakly used as well. The concept of virtual manufacturing is a supporting idea to solve this problem. At the same time a number of practical problems should be solved like information conformity, data transfer, unified technological concepts acceptation etc. In the present paper the proposed ways to solve the practical problems of virtual manufacturing are described. General objective is to introduce the knowledge-based CAPP system as missing module for Virtual Manufacturing in the selected product domain. Surface-centered planning concept based on STEP- based modeling principles, and knowledge-based process planning methodology will be used to gain the objectives. As a result the planning module supplied by design data with direct access, and supporting advising environment is expected. Mould producing SME would be as test basis.

  11. Tolerances in micro manufacturing

    DEFF Research Database (Denmark)

    Hansen, Hans Nørgaard; Zhang, Yang; Islam, Aminul

    This paper describes a method for analysis of tolerances in micro manufacturing. It proposes a mapping oftolerances to dimensions and compares this with current available international standards. The analysisdocuments that tolerances are not scaled down as the absolute dimension. In practice...

  12. Cladding tube manufacturing technology

    International Nuclear Information System (INIS)

    Hahn, R.; Jeong, Y. H.; Baek, B. J.; Kim, K. H.; Kim, S. J.; Choi, B. K.; Kim, J. M.

    1999-04-01

    This report gives an overview of the manufacturing routine of PWR cladding tubes. The routine essentially consists of a series of deformation and annealing processes which are necessary to transform the ingot geometry to tube dimensions. By changing shape, microstructure and structure-related properties are altered simultaneously. First, a short overview of the basics of that part of deformation geometry is given which is related to tube reducing operations. Then those processes of the manufacturing routine which change the microstructure are depicted, and the influence of certain process parameters on microstructure and material properties are shown. The influence of the resulting microstructure on material properties is not discussed in detail, since it is described in my previous report A lloy Development for High Burnup Cladding . Because of their paramount importance still up to now, and because manufacturing data and their influence on properties for other alloys are not so well established or published, the descriptions are mostly related to Zry4 tube manufacturing, and are only in short for other alloys. (author). 9 refs., 46 figs

  13. Nuclear fuel manufacture

    International Nuclear Information System (INIS)

    Costello, J.M.

    1980-09-01

    The technologies used to manufacture nuclear fuel from uranium ore are outlined, with particular reference to the light water reactor fuel cycle. Capital and operating cost estimates for the processing stages are given, and the relevance to a developing uranium industry in Australia is discussed

  14. Manufacturing and Merchandising Careers

    Science.gov (United States)

    Ryan, Peter J.; And Others

    1977-01-01

    Anyone with a flair for business, product development, or promotion might consider a manufacturing or merchandising occupation. The music industry offers many career opportunities for administrators, salespersons, marketing specialists--the record industry offers positions from promotion manager to rack jobber. Describes instrument company…

  15. Manufacturing in Denmark

    DEFF Research Database (Denmark)

    Hansen, Johannes; Boer, Henrike Engele Elisabeth; Boer, Harry

    This report compares the manufacturing strategies, practices, performances and improvement activities of 39 companies that are representative for the Danish assembly industry with those of 804 companies from 19 other countries. The data supporting this report were collected in 2013 and concern...

  16. Competitive Manufacturing Dynamics

    DEFF Research Database (Denmark)

    Rymaszewska, Anna; Christensen, Irene; Karlsson, Christer

    to constantly improve this process in terms of time to volume, according to predefined cost and quality measures. The importance of the success of this process can lead to a significant creation of competitive advantage. This paper addresses the challenges of the manufacturing ramp-up process in the context...

  17. Cladding tube manufacturing technology

    Energy Technology Data Exchange (ETDEWEB)

    Hahn, R. [Kraftwerk Union AG, Mulheim (Germany); Jeong, Y.H.; Baek, B.J.; Kim, K.H.; Kim, S.J.; Choi, B.K.; Kim, J.M. [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of)

    1999-04-01

    This report gives an overview of the manufacturing routine of PWR cladding tubes. The routine essentially consists of a series of deformation and annealing processes which are necessary to transform the ingot geometry to tube dimensions. By changing shape, microstructure and structure-related properties are altered simultaneously. First, a short overview of the basics of that part of deformation geometry is given which is related to tube reducing operations. Then those processes of the manufacturing routine which change the microstructure are depicted, and the influence of certain process parameters on microstructure and material properties are shown. The influence of the resulting microstructure on material properties is not discussed in detail, since it is described in my previous report 'Alloy Development for High Burnup Cladding.' Because of their paramount importance still up to now, and because manufacturing data and their influence on properties for other alloys are not so well established or published, the descriptions are mostly related to Zry4 tube manufacturing, and are only in short for other alloys. (author). 9 refs., 46 figs.

  18. Drug development and manufacturing

    Science.gov (United States)

    Warner, Benjamin P.; McCleskey, T. Mark; Burrell, Anthony K.

    2015-10-13

    X-ray fluorescence (XRF) spectrometry has been used for detecting binding events and measuring binding selectivities between chemicals and receptors. XRF may also be used for estimating the therapeutic index of a chemical, for estimating the binding selectivity of a chemical versus chemical analogs, for measuring post-translational modifications of proteins, and for drug manufacturing.

  19. The Solutions to the Problem of Temporary Vehicle Parking in the City. The Analysis of Vehicle Parking Time and Costs

    Directory of Open Access Journals (Sweden)

    Ričardas Mockus

    2011-04-01

    Full Text Available Methods of solving the problems of temporary parking of vehicles in the city by using the automatic parking systems are considered. The investigation of vehicle parking is described and the comparison of the ramp-type and automated parking lots is presented.Article in Lithuanian

  20. 75 FR 11169 - Reedsport OPT Wave Park Project; Reedsport OPT Wave Park; LLC Notice of Scoping Meetings and...

    Science.gov (United States)

    2010-03-10

    ... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Project No. 12713-002] Reedsport OPT Wave Park Project; Reedsport OPT Wave Park; LLC Notice of Scoping Meetings and Environmental Site...: Reedsport OPT Wave Park, LLC. e. Name of Project: Reedsport OPT Wave Park Project. [[Page 11170

  1. A Brief History of Kafue National Park, Zambia.

    Directory of Open Access Journals (Sweden)

    H.K. Mwima

    2001-07-01

    Full Text Available This paper presents the first documentation of the history of Zambia's oldest and largest national park: Kafue National Park. The movement of people out of the park is systematically presented. Furthermore, access and resource use and exploitation rights granted to people who lived inside the park are summarised. The paper looks at park administration, wildlife management, tourism and briefly presents areas for future studies.

  2. Multiphysics modelling of manufacturing processes: A review

    DEFF Research Database (Denmark)

    Jabbari, Masoud; Baran, Ismet; Mohanty, Sankhya

    2018-01-01

    Numerical modelling is increasingly supporting the analysis and optimization of manufacturing processes in the production industry. Even if being mostly applied to multistep processes, single process steps may be so complex by nature that the needed models to describe them must include multiphysics...... the diversity in the field of modelling of manufacturing processes as regards process, materials, generic disciplines as well as length scales: (1) modelling of tape casting for thin ceramic layers, (2) modelling the flow of polymers in extrusion, (3) modelling the deformation process of flexible stamps...... for nanoimprint lithography, (4) modelling manufacturing of composite parts and (5) modelling the selective laser melting process. For all five examples, the emphasis is on modelling results as well as describing the models in brief mathematical details. Alongside with relevant references to the original work...

  3. Additive Manufacturing of Shape Memory Alloys

    Science.gov (United States)

    Van Humbeeck, Jan

    2018-04-01

    Selective Laser Melting (SLM) is an additive manufacturing production process, also called 3D printing, in which functional, complex parts are produced by selectively melting patterns in consecutive layers of powder with a laser beam. The pattern the laser beam is following is controlled by software that calculates the pattern by slicing a 3D CAD model of the part to be constructed. Apart from SLM, also other additive manufacturing techniques such as EBM (Electron Beam Melting), FDM (Fused Deposition Modelling), WAAM (Wire Arc Additive Manufacturing), LENS (Laser Engineered Net Shaping such as Laser Cladding) and binder jetting allow to construct complete parts layer upon layer. But since more experience of AM of shape memory alloys is collected by SLM, this paper will overview the potentials, limits and problems of producing NiTi parts by SLM.

  4. Participation and dialogue in strategic manufacturing development

    DEFF Research Database (Denmark)

    Riis, Jens Ove; Dukovska-Popovska, Iskra; Johansen, John

    2006-01-01

    Increased competition and the dynamics of technological and market developments have made operations in industrial enterprises very complex, with many stakeholders in and around the enterprise. At the same time, it has become important to address strategic issues of manufacturing. To plan...... dialogues during a workshop, part of which is a dialogue-monitoring instrument. Empirical studies will draw out process elements of participation and dialogue and demonstrate the applicability of the model. Finally, implications are spelled out for planning and managing workshops in different phases...... and manage an appropriate degree of participation in strategy development has become a key issue, especially to ensure ideas and ownership from those who will be involved in the implementation of a manufacturing strategy. We have developed and implemented a five-phased process for developing a manufacturing...

  5. The Future of Pharmaceutical Manufacturing Sciences

    DEFF Research Database (Denmark)

    Rantanen, Jukka; Khinast, Johannes

    2015-01-01

    The entire pharmaceutical sector is in an urgent need of both innovative technological solutions and fundamental scientific work, enabling the production of highly engineered drug products. Commercial-scale manufacturing of complex drug delivery systems (DDSs) using the existing technologies...... is challenging. This review covers important elements of manufacturing sciences, beginning with risk management strategies and design of experiments (DoE) techniques. Experimental techniques should, where possible, be supported by computational approaches. With that regard, state-of-art mechanistic process...... control solutions. Last part of the review addresses future manufacturing solutions, covering continuous processing and, specifically, hot-melt processing and printing-based technologies. Finally, challenges related to implementing these technologies as a part of future health care systems are discussed....

  6. Development of steam generator manufacturing technology

    International Nuclear Information System (INIS)

    Grant, J.A.

    1979-01-01

    In 1968 Babcock and Wilcox (Operations) Ltd., received an order from the CEGB to design, manufacture, install and commission 16 Steam Generators for 2 x 660 Mw (e) Advanced Gas Cooled Reactor Power Station at Hartlepool. This order was followed in 1970 by a similar order for the Heysham Power Station. The design and manufacture of the Steam Generators represented a major advance in technology and the paper discusses the methods by which a manufacturing facility was developed, by the Production Division of Babcock, to produce components to a quality, complexity and accuracy unique in the U.K. commercial boilermaking industry. The discussion includes a brief design background, a description of the Steam Generators and a view of the Production Division background. This is followed by a description of the organisation of the technological development and a consideration of the results. (author)

  7. The design of impact absorbing structures for additive manufacture

    International Nuclear Information System (INIS)

    Brennan-Craddock, J; Brackett, D; Wildman, R; Hague, R

    2012-01-01

    Additive manufacturing (AM) is increasingly becoming a viable manufacturing process due to dramatic advantages that it facilitates in the area of design complexity. This paper investigates the potential of additively manufactured lattice structures for the application of tailored impact absorption specifically for conformal body protection. It explores lattice cell types based on foam microstructures and assesses their suitability for impact absorption. The effect of varying the cell strut edge design is also investigated. The implications of scaling these cells up for AM are discussed as well as the design issues regarding the handling of geometric complexity and the requirement for body conformity. The suitability of AM materials for this application is also discussed.

  8. Applications of Metal Additive Manufacturing in Veterinary Orthopedic Surgery

    Science.gov (United States)

    Harrysson, Ola L. A.; Marcellin-Little, Denis J.; Horn, Timothy J.

    2015-03-01

    Veterinary medicine has undergone a rapid increase in specialization over the last three decades. Veterinarians now routinely perform joint replacement, neurosurgery, limb-sparing surgery, interventional radiology, radiation therapy, and other complex medical procedures. Many procedures involve advanced imaging and surgical planning. Evidence-based medicine has also become part of the modus operandi of veterinary clinicians. Modeling and additive manufacturing can provide individualized or customized therapeutic solutions to support the management of companion animals with complex medical problems. The use of metal additive manufacturing is increasing in veterinary orthopedic surgery. This review describes and discusses current and potential applications of metal additive manufacturing in veterinary orthopedic surgery.

  9. Finding the Value of Urban Parking : An Analysis of the Impacts of Smart Parking Systems on Congestion and Land Values in Downtown Houston, Final Report

    Science.gov (United States)

    2018-01-01

    For this report, researchers have examined smart parking, which is a parking management tool that uses various technologies to aid drivers in efficiently locating and paying for available parking. Smart parking systems allow drivers to know where the...

  10. Potential of Continuous Manufacturing for Liposomal Drug Products.

    Science.gov (United States)

    Worsham, Robert D; Thomas, Vaughan; Farid, Suzanne S

    2018-05-21

    Over the last several years, continuous manufacturing of pharmaceuticals has evolved from bulk APIs and solid oral dosages into the more complex realm of biologics. The development of continuous downstream processing techniques has allowed biologics manufacturing to realize the benefits (e.g. improved economics, more consistent quality) that come with continuous processing. If relevant processing techniques and principles are selected, the opportunity arises to develop continuous manufacturing designs for additional pharmaceutical products including liposomal drug formulations. Liposome manufacturing has some inherent aspects that make it favorable for a continuous process. Other aspects such as formulation refinement, materials of construction, and aseptic processing need development, but present an achievable challenge. This paper reviews the current state of continuous manufacturing technology applicable to liposomal drug product manufacturing and an assessment of the challenges and potential of this application. This article is protected by copyright. All rights reserved.

  11. Ohio Advanced Energy Manufacturing Center

    Energy Technology Data Exchange (ETDEWEB)

    Kimberly Gibson; Mark Norfolk

    2012-07-30

    The program goal of the Ohio Advanced Energy Manufacturing Center (OAEMC) is to support advanced energy manufacturing and to create responsive manufacturing clusters that will support the production of advanced energy and energy-efficient products to help ensure the nation's energy and environmental security. This goal cuts across a number of existing industry segments critical to the nation's future. Many of the advanced energy businesses are starting to make the transition from technology development to commercial production. Historically, this transition from laboratory prototypes through initial production for early adopters to full production for mass markets has taken several years. Developing and implementing manufacturing technology to enable production at a price point the market will accept is a key step. Since these start-up operations are configured to advance the technology readiness of the core energy technology, they have neither the expertise nor the resources to address manufacturing readiness issues they encounter as the technology advances toward market entry. Given the economic realities of today's business environment, finding ways to accelerate this transition can make the difference between success and failure for a new product or business. The advanced energy industry touches a wide range of industry segments that are not accustomed to working together in complex supply chains to serve large markets such as automotive and construction. During its first three years, the Center has catalyzed the communication between companies and industry groups that serve the wide range of advanced energy markets. The Center has also found areas of common concern, and worked to help companies address these concerns on a segment or industry basis rather than having each company work to solve common problems individually. EWI worked with three industries through public-private partnerships to sew together disparate segments helping to promote

  12. Project Stakeholder Management: A Case Study of a Brazilian Science Park

    Directory of Open Access Journals (Sweden)

    Antônio Carlos Pacagnella Júnior

    2015-07-01

    Full Text Available The stakeholder management has been a topic increasingly discussed in the literature about project management, though still existing, large gaps to be filled, especially in complex projects such as the implementation of science parks. Thus, in this paper is presented a case of a Brazilian Science Park which shows how the management team of the project identified key stakeholders and established strategies for engagement and collaboration that sought to increase their engagement, get resources and make use of specific capabilities that were required during the lifecycle of the project to the reaching of its goals.

  13. Climate Change in Voyageurs National Park

    Science.gov (United States)

    Seeley, M. W.

    2011-12-01

    Voyageurs National Park was created in 1975. This beautifully forested and lake-dominated landscape shared between Minnesota and Canada has few roads and must be seen by water. The islands and Kabetogama Peninsula are part of the Canadian Shield, some of the oldest exposed rock in the world. Voyageurs National Park boasts many unique landscape and climatic attributes, and like most mid-latitude regions of the northern hemisphere climate change is in play there. The statistical signals of change in the climate record are evident from both temperature and precipitation measurements. The history of these measurements goes back over 100 years. Additionally, studies and measurements of the lakes and general ecosystem already show some consequences of these climate changes. Mean temperature measurements are generally warmer than they once were, most notably in the winter season. Minimum temperatures have changed more than maximum temperatures. Precipitation has trended upward, but has also changed in character with greater frequency and contribution from thunderstorm rainfalls across the park. In addition variability in annual precipitation has become more amplified, as the disparity between wet and dry years has grown wider. Some changes are already in evidence in terms of bird migration patterns, earlier lake ice-out dates, warmer water temperatures with more algal blooms, decline in lake clarity, and somewhat longer frost-free seasons. Climate change will continue to have impacts on Voyageurs National Park, and likely other national parks across the nation. Furthermore scientists may find that the study, presentation, and discussion about climate impacts on our national parks is a particularly engaging way to educate citizens and improve climate literacy as we contemplate what adaptation and mitigation policies should be enacted to preserve the quality of our national parks for future generations.

  14. Urban parks as green walls or green magnets? Interracial relations in neighborhood boundary parks

    Science.gov (United States)

    Paul H. Gobster

    1998-01-01

    A recent paper in this journal (Solecki and Welch, 1995) describes how urban parks that lie between racially different neighborhoods can become "green walls" or barriers to use and appreciation. Although this phenomenon is well grounded in the experience of many who plan for, manage, and live near parks in racially and ethnically segregated cities, an...

  15. The Myth of "Rosa Parks the Tired." Teaching about Rosa Parks and the Montgomery Bus Boycott.

    Science.gov (United States)

    Kohl, Herbert

    1993-01-01

    Retells the story of Rosa Parks and the Montgomery (Alabama) bus boycott to reflect more accurately the cultural and historical background of the boycott and the conscious decision made by Mrs. Parks. Accurate examination of the story actually enhances a child's ability to identify with the issues and the protagonists. (SLD)

  16. Bark in the Park: A Review of Domestic Dogs in Parks

    Science.gov (United States)

    Weston, Michael A.; Fitzsimons, James A.; Wescott, Geoffrey; Miller, Kelly K.; Ekanayake, Kasun B.; Schneider, Thomas

    2014-09-01

    The presence of domestic dogs Canis familiaris in public open spaces is increasingly controversial. In our review of the literature, we located 133 publications of various types (papers, reports etc.) that examine some aspect of dogs in parks and open spaces (50 % focussed solely on dogs). There has been an exponential growth in the cumulative number of articles ( R 2 = 0.96; 82 % published since 1997); almost all pertain to temperate latitudes (97 %) and most to the northern hemisphere (62 %). Most articles focus on impacts on wildlife (51 %), zoonotic diseases (17 %), and people's perceptions regarding dogs (12 %). Articles mostly describe problems associated with dogs, while reports of low compliance with dog regulations are common. We outline six major findings regarding dogs in parks: (1) there is a paucity of information on dogs in parks, particularly in relation to their interactions with wildlife and regarding their management; (2) published studies are mainly restricted to a handful of locations in developed countries; (3) sectors of societies hold different views over the desirability of dogs in parks; (4) the benefits and risks of dogs to humans and park values are poorly documented and known; (5) dogs represent a notable disease risk in some but not all countries; and (6) coastal parks are over-represented in the literature in terms of potential negative impacts. Park managers globally require better information to achieve conservation outcomes from dog management in parks.

  17. Towards Knowledge Management for Smart Manufacturing.

    Science.gov (United States)

    Feng, Shaw C; Bernstein, William Z; Hedberg, Thomas; Feeney, Allison Barnard

    2017-09-01

    The need for capturing knowledge in the digital form in design, process planning, production, and inspection has increasingly become an issue in manufacturing industries as the variety and complexity of product lifecycle applications increase. Both knowledge and data need to be well managed for quality assurance, lifecycle-impact assessment, and design improvement. Some technical barriers exist today that inhibit industry from fully utilizing design, planning, processing, and inspection knowledge. The primary barrier is a lack of a well-accepted mechanism that enables users to integrate data and knowledge. This paper prescribes knowledge management to address a lack of mechanisms for integrating, sharing, and updating domain-specific knowledge in smart manufacturing. Aspects of the knowledge constructs include conceptual design, detailed design, process planning, material property, production, and inspection. The main contribution of this paper is to provide a methodology on what knowledge manufacturing organizations access, update, and archive in the context of smart manufacturing. The case study in this paper provides some example knowledge objects to enable smart manufacturing.

  18. Analysis of flow coefficient in chair manufacture

    Directory of Open Access Journals (Sweden)

    Ivković Dragoljub

    2005-01-01

    Full Text Available The delivery on time is not possible without the good-quality planning of deadlines, i.e. planning of the manufacturing process duration. The study of flow coefficient enables the realistic forecasting of the manufacturing process duration. This paper points to the significance of the study of flow coefficient on scientific basis so as to determine the terms of the end of the manufacture of chairs made of sawn timber. Chairs are the products of complex construction, often almost completely made of sawn timber as the basic material. They belong to the group of export products, so it is especially significant to analyze the duration of the production cycle, and the type and the degree of stoppages in this type of production. Parallel method of production is applied in chair manufacture. The study shows that the value of flow coefficient is close to one or higher, in most cases. The results indicate that the percentage of interoperational stoppage is unjustifiably high, so it is proposed how to decrease the percentage of stoppages in the manufacturing process.

  19. Knowledge management performance methodology regarding manufacturing organizations

    Science.gov (United States)

    Istrate, C.; Herghiligiu, I. V.

    2016-08-01

    The current business situation is extremely complicated. Business must adapt to the changes in order (a) to survive on the increasingly dynamic markets, (b) to meet customers’ new request for complex, customized and innovative products. In modern manufacturing organizations it can be seen a substantial improvement regarding the management of knowledge. This occurs due to the fact that organizations realized that knowledge and an efficient management of knowledge generates the highest value. Even it could be said that the manufacturing organizations were and are the biggest beneficiary of KM science. Knowledge management performance (KMP) evaluation in manufacturing organizations can be considered as extremely important because without measuring it, they are unable to properly assess (a) what goals, targets and activities must have continuity, (b) what must be improved and (c) what must be completed. Therefore a proper KM will generate multiple competitive advantages for organizations. This paper presents a developed methodological framework regarding the KMP importance regarding manufacturing organizations. This methodological framework was developed using as research methods: bibliographical research and a panel of specialists. The purpose of this paper is to improve the evaluation process of KMP and to provide a viable tool for manufacturing organizations managers.

  20. Biocompatibility of Advanced Manufactured Titanium Implants—A Review

    Science.gov (United States)

    Sidambe, Alfred T.

    2014-01-01

    Titanium (Ti) and its alloys may be processed via advanced powder manufacturing routes such as additive layer manufacturing (or 3D printing) or metal injection moulding. This field is receiving increased attention from various manufacturing sectors including the medical devices sector. It is possible that advanced manufacturing techniques could replace the machining or casting of metal alloys in the manufacture of devices because of associated advantages that include design flexibility, reduced processing costs, reduced waste, and the opportunity to more easily manufacture complex or custom-shaped implants. The emerging advanced manufacturing approaches of metal injection moulding and additive layer manufacturing are receiving particular attention from the implant fabrication industry because they could overcome some of the difficulties associated with traditional implant fabrication techniques such as titanium casting. Using advanced manufacturing, it is also possible to produce more complex porous structures with improved mechanical performance, potentially matching the modulus of elasticity of local bone. While the economic and engineering potential of advanced manufacturing for the manufacture of musculo-skeletal implants is therefore clear, the impact on the biocompatibility of the materials has been less investigated. In this review, the capabilities of advanced powder manufacturing routes in producing components that are suitable for biomedical implant applications are assessed with emphasis placed on surface finishes and porous structures. Given that biocompatibility and host bone response are critical determinants of clinical performance, published studies of in vitro and in vivo research have been considered carefully. The review concludes with a future outlook on advanced Ti production for biomedical implants using powder metallurgy. PMID:28788296

  1. Biocompatibility of Advanced Manufactured Titanium Implants—A Review

    Directory of Open Access Journals (Sweden)

    Alfred T. Sidambe

    2014-12-01

    Full Text Available Titanium (Ti and its alloys may be processed via advanced powder manufacturing routes such as additive layer manufacturing (or 3D printing or metal injection moulding. This field is receiving increased attention from various manufacturing sectors including the medical devices sector. It is possible that advanced manufacturing techniques could replace the machining or casting of metal alloys in the manufacture of devices because of associated advantages that include design flexibility, reduced processing costs, reduced waste, and the opportunity to more easily manufacture complex or custom-shaped implants. The emerging advanced manufacturing approaches of metal injection moulding and additive layer manufacturing are receiving particular attention from the implant fabrication industry because they could overcome some of the difficulties associated with traditional implant fabrication techniques such as titanium casting. Using advanced manufacturing, it is also possible to produce more complex porous structures with improved mechanical performance, potentially matching the modulus of elasticity of local bone. While the economic and engineering potential of advanced manufacturing for the manufacture of musculo-skeletal implants is therefore clear, the impact on the biocompatibility of the materials has been less investigated. In this review, the capabilities of advanced powder manufacturing routes in producing components that are suitable for biomedical implant applications are assessed with emphasis placed on surface finishes and porous structures. Given that biocompatibility and host bone response are critical determinants of clinical performance, published studies of in vitro and in vivo research have been considered carefully. The review concludes with a future outlook on advanced Ti production for biomedical implants using powder metallurgy.

  2. Biocompatibility of Advanced Manufactured Titanium Implants-A Review.

    Science.gov (United States)

    Sidambe, Alfred T

    2014-12-19

    Titanium (Ti) and its alloys may be processed via advanced powder manufacturing routes such as additive layer manufacturing (or 3D printing) or metal injection moulding. This field is receiving increased attention from various manufacturing sectors including the medical devices sector. It is possible that advanced manufacturing techniques could replace the machining or casting of metal alloys in the manufacture of devices because of associated advantages that include design flexibility, reduced processing costs, reduced waste, and the opportunity to more easily manufacture complex or custom-shaped implants. The emerging advanced manufacturing approaches of metal injection moulding and additive layer manufacturing are receiving particular attention from the implant fabrication industry because they could overcome some of the difficulties associated with traditional implant fabrication techniques such as titanium casting. Using advanced manufacturing, it is also possible to produce more complex porous structures with improved mechanical performance, potentially matching the modulus of elasticity of local bone. While the economic and engineering potential of advanced manufacturing for the manufacture of musculo-skeletal implants is therefore clear, the impact on the biocompatibility of the materials has been less investigated. In this review, the capabilities of advanced powder manufacturing routes in producing components that are suitable for biomedical implant applications are assessed with emphasis placed on surface finishes and porous structures. Given that biocompatibility and host bone response are critical determinants of clinical performance, published studies of in vitro and in vivo research have been considered carefully. The review concludes with a future outlook on advanced Ti production for biomedical implants using powder metallurgy.

  3. Micro-manufacturing: design and manufacturing of micro-products

    National Research Council Canada - National Science Library

    Koç, Muammer; Özel, Tuğrul

    2011-01-01

    .... After addressing the fundamentals and non-metallic-based micro-manufacturing processes in the semiconductor industry, it goes on to address specific metallic-based micro-manufacturing processes...

  4. Reconfigurable manufacturing system for agile mass customization manufacturing

    CSIR Research Space (South Africa)

    Xing, B

    2006-07-01

    Full Text Available Manufacturing companies are facing three challenges: low cost production of product, high quality standard and rapid responsiveness to customer requirements. These three goals are equally important for the manufacturing companies who want...

  5. A Cross-Sectional Investigation of the Importance of Park Features for Promoting Regular Physical Activity in Parks.

    Science.gov (United States)

    Costigan, Sarah A; Veitch, Jenny; Crawford, David; Carver, Alison; Timperio, Anna

    2017-11-02

    Parks in the US and Australia are generally underutilised, and park visitors typically engage in low levels of physical activity (PA). Better understanding park features that may encourage visitors to be active is important. This study examined the perceived importance of park features for encouraging park-based PA and examined differences by sex, age, parental-status and participation in PA. Cross-sectional surveys were completed by local residents ( n = 2775) living near two parks (2013/2015). Demographic variables, park visitation and leisure-time PA were self-reported, respondents rated the importance of 20 park features for encouraging park-based PA in the next fortnight. Chi-square tests of independence examined differences in importance of park features for PA among sub-groups of local residents (sex, age, parental-status, PA). Park features ranked most important for park-based PA were: well maintained (96.2%), feel safe (95.4%), relaxing atmosphere (91.2%), easy to get to (91.7%), and shady trees (90.3%). All subgroups ranked 'well maintained' as most important. Natural and built environment features of parks are important for promoting adults' park-based PA, and should be considered in park (re)design.

  6. Semi-automatic parking slot marking recognition for intelligent parking assist systems

    Directory of Open Access Journals (Sweden)

    Ho Gi Jung

    2014-01-01

    Full Text Available This paper proposes a semi-automatic parking slot marking-based target position designation method for parking assist systems in cases where the parking slot markings are of a rectangular type, and its efficient implementation for real-time operation. After the driver observes a rearview image captured by a rearward camera installed at the rear of the vehicle through a touchscreen-based human machine interface, a target parking position is designated by touching the inside of a parking slot. To ensure the proposed method operates in real-time in an embedded environment, access of the bird's-eye view image is made efficient: image-wise batch transformation is replaced with pixel-wise instantaneous transformation. The proposed method showed a 95.5% recognition rate in 378 test cases with 63 test images. Additionally, experiments confirmed that the pixel-wise instantaneous transformation reduced execution time by 92%.

  7. Design and application of reconfigurable manufacturing systems in agile mass customization manufacturing environment.

    CSIR Research Space (South Africa)

    Xing, B

    2007-05-01

    Full Text Available processes. Many manufacturing techniques are based on the principles of Flexible Manufacturing and Dedicated Manufacturing for mass production. Reconfigurable Manufacturing System, (RMS), is a manufacturing system that can provide for Agile Manufacturing...

  8. Robot skills for manufacturing

    DEFF Research Database (Denmark)

    Pedersen, Mikkel Rath; Nalpantidis, Lazaros; Andersen, Rasmus Skovgaard

    2016-01-01

    -asserting robot skills for manufacturing. We show how a relatively small set of skills are derived from current factory worker instructions, and how these can be transferred to industrial mobile manipulators. General robot skills can not only be implemented on these robots, but also be intuitively concatenated...... products are introduced by manufacturers. In order to compete on global markets, the factories of tomorrow need complete production lines, including automation technologies that can effortlessly be reconfigured or repurposed, when the need arises. In this paper we present the concept of general, self...... in running production facilities at an industrial partner. It follows from these experiments that the use of robot skills, and associated task-level programming framework, is a viable solution to introducing robots that can intuitively and on the fly be programmed to perform new tasks by factory workers....

  9. Manufacture of heat exchangers

    International Nuclear Information System (INIS)

    Burton, J.E.; Tombs, R.W.T.

    1980-01-01

    A tube bundle for use in a heat exchanger has a series of spaced parallel tubes supported by tube plates and is manufactured by depositing welding material around the end of each tube, machining the deposited material to form an annular flange around the end of the tube and welding the flange into apertures in the tube plate. Preferably the tubes have a length which is slightly less than the distance between the outer surfaces of the tube plates and the deposited material is deposited so that it overlaps and protects the end surfaces of the tubes. A plug may be inserted in the bore of the tubes during the welding material deposition which, as described, is effected by manual metal arc welding. One use of heat exchangers incorporating a tube bundle manufactured as above is in apparatus for reducing the volume of, and recovering nitric acid from, radioactive effluents from a nuclear reprocessing plant. (author)

  10. The manufacturers' viewpoint

    International Nuclear Information System (INIS)

    Davis, D.A.

    1986-01-01

    This paper describes the approach by six separate manufacturers to the problem of availability from their particular view point. This presentation demonstrates basic strategy: attention to high reliability at the design phase, based on positive and detailed feedback from existing plant; quality assurance at the production stage which has been planned into the production process in the form of a Q.A. manual in design; sophisticated test procedures and facilities; simplicity of design with high accuracy in production; provision of a clear operational maintenance manual, etc. The manufacturers agreed on the need to make a conscious commitment to design for high availability, taking into account both initial and ongoing operating costs in life cycle cost assessment. Predictability, reliability, maintainability, efficiency, market acceptability and maintenance support based on high quality feedback between operator and supplier were all stressed on the grounds that prevention is always better than cure

  11. Does Pastoralists' Participation in the Management of National Parks in Northern Norway Contribute to Adaptive Governance?

    Directory of Open Access Journals (Sweden)

    Camilla Risvoll

    2014-06-01

    Full Text Available Norwegian protected areas have historically been managed by central, expertise bureaucracy; however, a governance change in 2010 decentralized and delegated the right to manage protected areas to locally elected politicians and elected Sámi representatives in newly established National Park Boards. We explore how this new governance change affects adaptive capacity within the reindeer industry, as the reindeer herders are now participating with other users in decision-making processes related to large tracts of protected areas in which they have pasture access. Aspects within adaptive capacity and resilience thinking are useful as complementary dimensions to a social-ecological system framework (Ostrom 2007 in exploring the dynamics of complex adaptive social-ecological systems. The National Park Board provides a novel example of adaptive governance that can foster resilient livelihoods for various groups of actors that depend on protected areas. Data for this paper were gathered primarily through observation in National Park Board meetings, focus groups, and qualitative interviews with reindeer herders and other key stakeholders. We have identified certain aspects of the national park governance that may serve as sources of resilience and adaptive capacity for the natural system and pastoral people that rely on using these areas. The regional National Park Board is as such a critical mechanism that provides an action arena for participation and conflict resolution. However, desired outcomes such as coproduction of knowledge, social learning, and increased adaptive capacity within reindeer husbandry have not been actualized at this time. The challenge with limited scope of action in the National Park Board and a mismatch between what is important for the herders and what is addressed in the National Park Board become important for the success of this management model.

  12. Public perception and attitude towards chemical industry park in Dalian, Bohai Rim.

    Science.gov (United States)

    He, Guizhen; Chen, Chunci; Zhang, Lei; Lu, Yonglong

    2018-04-01

    Recent decade has witnessed accelerating expansion of chemical industry and increasing conflicts between the local citizens, governmental authorities and project developers, especially in some coastal and port cities in China. Development and transformation of chemical industrial parks has been adopted as a national initiative recently. However, there is a paucity of research examining public perspectives on chemical industrial parks and their risks. Aiming to understand public perception, attitude, and response and the factors underlying the support/acceptance of chemical industry park, this paper investigated 418 residents neighboring to two chemical industrial parks, Dalian in Bohai Rim through face-to-face questionnaire survey. The results showed the knowledge of the respondents on the chemical industrial parks development was very limited. The respondents had complex perceptions on the environmental impacts, risks control, social-economic benefits, and problem awareness. The current levels of information disclosure and public participation were very low. The central governmental official (44.3%) was the most trustworthy group by the respondents. Only 5.5% and 23.2% of the respondents supported the construction of a new CIP nearby and far away their homes, whilst 13% thought new CIP project as acceptable. The spearman correlation analysis results showed a strong NIMBY effect (Not In My Backyard). Factor analysis results demonstrated five latent factors: knowledge, benefit, information, trust, and participation. Multiple linear regression analysis indicated how socio-demographic differences and five latent factors might impact on the support/acceptance of the chemical industrial parks. Education level, trust, information, and participation were significant predictors of public support/acceptance level. This study contributes to our limited knowledge and understanding of public sentiments to the chemical industry parks in China. Copyright © 2017 Elsevier Ltd

  13. Northwest Manufacturing Initiative

    Science.gov (United States)

    2014-07-31

    biodegradable wipes, and bags. The gStyle clothing line consists of various types of stylish clothes for babies. All gDiapers are plastic free...offers recycling services for industrial plastics and non-serviceable containers. Industrial plastics include pails, buckets, pallets, plastic film, and...manufacturer, now recycle used soda bottles, unusable second quality fabrics and worn out garments into polyester fibers to produce many of their clothes

  14. Rapid manufacturing for microfluidics

    CSIR Research Space (South Africa)

    Land, K

    2012-10-01

    Full Text Available for microfluidics K. LAND, S. HUGO, M MBANJWA, L FOURIE CSIR Materials Science and Manufacturing P O Box 395, Pretoria 0001, SOUTH AFRICA Email: kland@csir.co.za INTRODUCTION Microfluidics refers to the manipulation of very small volumes of fluid.... Microfluidics is at the forefront of developing solutions for drug discovery, diagnostics (from glucose tests to malaria and TB testing) and environmental diagnostics (E-coli monitoring of drinking water). In order to quickly implement new designs, a rapid...

  15. Northwest Manufacturing Initiative

    Science.gov (United States)

    2013-08-31

    Kadali R. Talla R. Hugo T. Russell A. Thoreson E. Porgharibshahishahrebabak Dae-wook Kim Ellen A. Fuller J. Rick Evans 5d. PROJECT NUMBER...Manufacturing (CIM) Cell .................................................................................. 8 Hurricane 130W Laser Cutter/Engraver (48” X 36...Miniature Prototype Warehouse Application using Imaging Source and RoboRealm® 3. Hurricane 130W Laser Cutter/Engraver (48” X 36”) a. Rapid

  16. Technology for Manufacturing Efficiency

    Science.gov (United States)

    1995-01-01

    The Ground Processing Scheduling System (GPSS) was developed by Ames Research Center, Kennedy Space Center and divisions of the Lockheed Company to maintain the scheduling for preparing a Space Shuttle Orbiter for a mission. Red Pepper Software Company, now part of PeopleSoft, Inc., commercialized the software as their ResponseAgent product line. The software enables users to monitor manufacturing variables, report issues and develop solutions to existing problems.

  17. Advances in Additive Manufacturing

    Science.gov (United States)

    2016-07-14

    with a collection of information if it does not display a currently valid OMB control number. PLEASE DO NOT RETURN YOUR FORM TO THE ABOVE ADDRESS...Hamilton • Beth Bimber Air Force Research Laboratory, Metals Branch • Eddie Schwalbach • Mike Groeber • Benjamin Leever • James Hardin...conducting more in-field, or point-of-need, manufacturing than ever before. Other areas of concentration include man- machine interface, capabilities

  18. Cross-boundary management between national parks and surrounding lands: A review and discussion

    Science.gov (United States)

    Schonewald-Cox, Christine; Buechner, Marybeth; Sauvajot, Raymond; Wilcox, Bruce A.

    1992-03-01

    Protecting biodiversity on public lands is difficult, requiring the management of a complex array of factors. This is especially true when the ecosystems in question are affected by, or extend onto, lands outside the boundaries of the protected area. In this article we review recent developments in the cross-boundary management of protected natural resources, such as parks, wildlife reserves, and designated wilderness areas. Five ecological and 11 anthropic techniques have been suggested for use in cross-boundary management. The categories are not mutually exclusive, but each is a distinct and representative approach, suggested by various authors from academic, managerial, and legal professions. The ecological strategies stress the collection of basic data and documentation of trends. The anthropic techniques stress the usefulness of cooperative guidelines and the need to develop a local constituency which supports park goals. However, the situation is complex and the needed strategies are often difficult to implement. Diverse park resources are influenced by events in surrounding lands. The complexity and variability of sources, the ecological systems under protection, and the uncertainty of the effects combine to produce situations for which there are no simple answers. The solution to coexistence of the park and surrounding land depends upon creative techniques and recommendations, many still forthcoming. Ecological, sociological, legal, and economic disciplines as well as the managing agency should all contribute to these recommendations. Platforms for change include legislation, institutional policies, communication, education, management techniques, and ethics.

  19. Advanced manufacturing: Technology diffusion

    Energy Technology Data Exchange (ETDEWEB)

    Tesar, A.

    1995-12-01

    In this paper we examine how manufacturing technology diffuses rom the developers of technology across national borders to those who do not have the capability or resources to develop advanced technology on their own. None of the wide variety of technology diffusion mechanisms discussed in this paper are new, yet the opportunities to apply these mechanisms are growing. A dramatic increase in technology diffusion occurred over the last decade. The two major trends which probably drive this increase are a worldwide inclination towards ``freer`` markets and diminishing isolation. Technology is most rapidly diffusing from the US In fact, the US is supplying technology for the rest of the world. The value of the technology supplied by the US more than doubled from 1985 to 1992 (see the Introduction for details). History shows us that technology diffusion is inevitable. It is the rates at which technologies diffuse to other countries which can vary considerably. Manufacturers in these countries are increasingly able to absorb technology. Their manufacturing efficiency is expected to progress as technology becomes increasingly available and utilized.

  20. Fuel manufacturing and utilization

    International Nuclear Information System (INIS)

    2005-01-01

    The efficient utilisation of nuclear fuel requires manufacturing facilities capable of making advanced fuel types, with appropriate quality control. Once made, the use of such fuels requires a proper understanding of their behaviour in the reactor environment, so that safe operation for the design life can be achieved. The International Atomic Energy Agency supports Member States to improve in-pile fuel performance and management of materials; and to develop advanced fuel technologies for ensuring reliability and economic efficiency of the nuclear fuel cycle. It provides assistance to Member States to support fuel-manufacturing capability, including quality assurance techniques, optimization of manufacturing parameters and radiation protection. The IAEA supports the development fuel modelling expertise in Member States, covering both normal operation and postulated and severe accident conditions. It provides information and support for the operation of Nuclear Power Plant to ensure that the environment and water chemistry is appropriate for fuel operation. The IAEA supports fuel failure investigations, including equipment for failed fuel detection and for post-irradiation examination and inspection, as well as fuel repair, it provides information and support research into the basic properties of fuel materials, including UO 2 , MOX and zirconium alloys. It further offers guidance on the relationship with back-end requirement (interim storage, transport, reprocessing, disposal), fuel utilization and management, MOX fuels, alternative fuels and advanced fuel technology

  1. Another reptile translocation to a national park

    Directory of Open Access Journals (Sweden)

    W.R. Branch

    1990-10-01

    Full Text Available On 4 May 1988 a sub-adult (50 mm snout-vent length, 42 mm tail Jones' girdled lizard Cordylus tropidosternum jonesi was collected in a pile of wood being off-loaded at the new restcamp in the Karoo National Park, Beaufort West. The wood had been transported by lorry from the Kruger National Park. The specimen is deposited in the herpetological collection of the Port Elizabeth Museum (PEM R 4584. Jones' girdled lizard is a small, arboreal cordylid that shelters under tree bark and in hollow logs. It is common and widely-distributed in the Kruger National Park (Pienaar, Haacke & Jacobsen 1983, The Reptiles of the Kruger National Park, 3rd edition. Pretoria: National Parks Board and adjacent lowveld, being replaced in northern Zimbabwe and East Africa by the nominate race. Hewitt & Power (1913, Transactions of the Royal Society of South Africa 3: 147-176, 1913 reported a similar translocation of the species to Kimberley in association with timber brought to the diamond mining camps. One of us noted recently the ease and danger of the unwitting spread of commensal reptile species into conservation areas (Branch 1978, Koedoe 30: 165, and this is confirmed by this additional example. We recommend that should similar shipments of wood be considered essential, then they be fumigated to prevent the translocation of other alien organisms that may potentially have more dangerous consequences.

  2. The Park of Renewable Energy geoethical project

    Directory of Open Access Journals (Sweden)

    Patrizia Sibi

    2012-07-01

    Full Text Available The Park of Renewable Energy is an environmental technology park in the middle of Italy that has an innovative integrated system for the production of renewable energy. Recently, the Park launched a public invitation: to become part of a great widespread community for the production of renewable energy, and to promote energy conservation and a sustainable lifestyle. This empowerment process that turns consumers into energy producers – and also into those who convey the culture of sustainability – might, over time, give life to a community that actually lives according to the geoethical principles of biosustainability. The route for the identification and dissemination of the Park of Renewable Energy community is an interesting example of the generative process, whereby rather than doggedly pursuing a predetermined objective, such as a model to be implemented, the actors involved, “look for directions and values that are inherent in the means available” [Bateson 2000], including communication networks and methodologies of social participation. The community components focus their attention on the action and relationship effects, rather than on ways to reach a predefined goal. In this perspective, the Park of Renewable Energy experience aims to become an interesting object of observation and reflection for its green ethics. This ecological approach promises unexpected new creations: there is a chance we will at last see the birth of a sustainable form of social organization adapted to the human community.

  3. National parks, ecological integrity and climatic change

    International Nuclear Information System (INIS)

    Lopoukhine, N.

    1990-01-01

    The potential impacts of climate change on the national parks of Canada are discussed. There is a requirement to protect and manage national parks to maintain a functioning ecosystem with all its parts and processes. An active management regime is necessary, with objectives of ecological diversity/integrity clearly stated. The national parks located in the Canadian Prairie provinces are on or near transitions from forest to tundra and grasslands, and are likely to exhibit the most dramatic changes. The change in vegetation of such parks and in others will not manifest itself simply as a shift of zones but will be accompanied by a flora with new dominants. The boreal forest within the Prairie provinces is fire dependent and has the potential of being transformed into remnant units should post-fire germination be hampered by climatic change. A rapid change in climate would render national parks unable to provide protection of representative elements of Canada's landscapes as presently known. A threefold increase in the area dedicated to protection is a basic component of the sustainable development prescription. All government and private lands dedicated to protection should be forged into a network, to provide core protection for immigrating and emigrating communities and individual species displaced by a changing climate. 20 refs., 2 figs

  4. Characterization of the vegetation of the park road, Island of Salamanca, Magdalena - Colombia

    International Nuclear Information System (INIS)

    Tavera Escobar, Hector Arsenio; Gamba Cubides, Nestor Javier

    2001-01-01

    In Colombia, the natural national parks are par excellence the scenarios to protect the ecological integrity of the ecosystems and consequently for the conservation of the fauna, flora, diversity, genetic resources and values cultural and historical associates. Contrarily, these protected areas are subjected to the degradation caused by anthropic processes and natural that which goes in detriment of the benefits and services that provide to the society. The same as the other protected areas belonging to the system of natural national parks (SNNP), the park road Island of Salamanca (VPIS) it has been subject to the degradation, which has been generated mainly by factors of anthropic character that they have caused an environmental imbalance of great space and temporary magnitude whose repercussion is significant for the fragility of the ecosystems of the protected area in its particular context and for the importance of its function in the region of the complex estuary of the Magdalena River

  5. Woking Park PAFC CHP monitoring. Phase 1: Planning, installation and commissioning

    Energy Technology Data Exchange (ETDEWEB)

    Goulding, P S; Fry, M R

    2003-07-01

    This report covers the planning, installation and commissioning of the first commercially operated fuel cell cogeneration system in the UK. The involvement of Woking Borough Council, its approach to energy efficiency, and the Woking Park site are discussed, and details are given of the PC25/C 200kW fuel cell which is manufactured in the US by UTC Fuel Cells. A description of the Woking Park fuel cell combined heat and power application is presented, and the project economics, specification and tendering are examined. The route taken to planning approval is traced, and installation procedures are outlined. The testing of the phosphoric type PC25 fuel cell cogeneration unit is described, and expected cost and project timescales are noted.

  6. Transistor and integrated circuit manufacture

    International Nuclear Information System (INIS)

    Colman, D.

    1978-01-01

    This invention relates to the manufacture of transistors and integrated circuits by ion bombardment techniques and is particularly, but not exclusively, of value in the manufacture of so-called integrated injection logic circuitry. (author)

  7. 77 FR 2275 - Manufacturing Council

    Science.gov (United States)

    2012-01-17

    ... DEPARTMENT OF COMMERCE International Trade Administration Manufacturing Council AGENCY... candidate's proven experience in promoting, developing and marketing programs in support of manufacturing... participating in Council meetings and events are responsible for their travel, living and other personal...

  8. 76 FR 33244 - Manufacturing Council

    Science.gov (United States)

    2011-06-08

    ... DEPARTMENT OF COMMERCE International Trade Administration Manufacturing Council AGENCY... experience in promoting, developing and marketing programs in support of manufacturing industries, in job... Council meetings and events are responsible for their travel, living and other personal expenses. Meetings...

  9. Manufacturing mobility in global operations

    NARCIS (Netherlands)

    Steenhuis, H.J.; de Bruijn, E.J.

    2002-01-01

    The globalization trend inevitably affects the organization of manufacturing by enterprises. It offers opportunities to examine manufacturing from a global perspective and consequently to produce where it is most appropriate. However, globalization has also led to an increase in competitive

  10. Green Manufacturing Fundamentals and Applications

    CERN Document Server

    2013-01-01

    Green Manufacturing: Fundamentals and Applications introduces the basic definitions and issues surrounding green manufacturing at the process, machine and system (including supply chain) levels. It also shows, by way of several examples from different industry sectors, the potential for substantial improvement and the paths to achieve the improvement. Additionally, this book discusses regulatory and government motivations for green manufacturing and outlines the path for making manufacturing more green as well as making production more sustainable. This book also: • Discusses new engineering approaches for manufacturing and provides a path from traditional manufacturing to green manufacturing • Addresses regulatory and economic issues surrounding green manufacturing • Details new supply chains that need to be in place before going green • Includes state-of-the-art case studies in the areas of automotive, semiconductor and medical areas as well as in the supply chain and packaging areas Green Manufactu...

  11. 75 FR 80040 - Manufacturing Council

    Science.gov (United States)

    2010-12-21

    ..., developing and marketing programs in support of manufacturing industries, job creation in the manufacturing... relevant contact information such as mailing address, fax, e-mail, fixed and mobile phone numbers and...

  12. Transistor and integrated circuit manufacture

    Energy Technology Data Exchange (ETDEWEB)

    Colman, D

    1978-09-27

    This invention relates to the manufacture of transistors and integrated circuits by ion bombardment techniques and is particularly, but not exclusively, of value in the manufacture of so-called integrated injection logic circuitry.

  13. Sustainable landscape management in Tara National Park (Village Jagoštica, Serbia

    Directory of Open Access Journals (Sweden)

    Blagojević Ivana

    2012-01-01

    Full Text Available According to the Nature Protection Act of the Republic of Serbia, national park is defined as a large area with natural ecosystems of high value, in terms of conservation, complexity of structures, biogeographical features, cultural-historical values, and flora and fauna wealth. Owing to their exceptional natural integrity, national park is the treasure of great national importance. Villages (hamlets are integral parts of national park, but are sadly on the verge of disappearing, due to lack of inhabitants. The locals that choose to stay, by fighting for their village's survival and existence, are coming into a conflict with the management board of the national park (mainly directed towards the protection and preservation of biodiversity resources. The research presented here focused on Jagoštica village, located in the far northwestern part of Tara National Park, Serbia. According to the landscape reading, mapped land­scape (spatial elements and social survey, the researched aim was the development of a unique model for sustainable development, focused at protecting diversity of flora and fauna, as well as improving the living standards of local people. Rural tourism and production of local traditional products were found to be the most optimal strategies for moderating the development of this area.

  14. A Framework Based on OEE and Wireless Technology for Improving Overall Manufacturing Operations

    OpenAIRE

    Garcia , Martha-Patricia; Santos , Javier; Arcelus , Mikel; Viles , Elisabeth

    2011-01-01

    Part 1: Production Process; International audience; Manufacturers have the challenge to increase productivity given complex manufacturing environments. A source that provides substantial levels of productivity is the overall equipment effectiveness (OEE) metric, which is an indicator to improve not only equipment utilization; but also the overall manufacturing operations, because of the valuable information that comes from the availability, performance and quality rates. Although information ...

  15. Composites Manufacturing Education and Technology Facility Expedites Manufacturing Innovation

    Energy Technology Data Exchange (ETDEWEB)

    2017-01-01

    The Composites Manufacturing Education and Technology facility (CoMET) at the National Wind Technology Center at the National Renewable Energy Laboratory (NREL) paves the way for innovative wind turbine components and accelerated manufacturing. Available for use by industry partners and university researchers, the 10,000-square-foot facility expands NREL's composite manufacturing research capabilities by enabling researchers to design, prototype, and test composite wind turbine blades and other components -- and then manufacture them onsite. Designed to work in conjunction with NREL's design, analysis, and structural testing capabilities, the CoMET facility expedites manufacturing innovation.

  16. Potential of the Kakadu National Park Region

    Energy Technology Data Exchange (ETDEWEB)

    1988-01-01

    The Committee reviewed the potential of the Kakadu National Park region in the Northern Territory with particular reference to the nature of the resources available for exploitation and the impact of utilisation of these resources, particularly mining and tourism. Individual chapters discuss the Park, tourism, mineral resources (particularly the environmental and economic impacts of the Ranger Uranium Mine and the potential impacts of mining the Koongarra and Jabiluka deposits), the town of Jabiru, commercial fishing, other issues (the scientific resource, crocodiles, introduced species and fire), and park management and control (including a review of the role of the Office of the Supervising Scientist for the Alligator Rivers Region). A number of recommendations are made and the dissenting report of three of the Committee's members is included.

  17. Exploring manufacturing solutions for SMEs

    DEFF Research Database (Denmark)

    Radziwon, Agnieszka; Blichfeldt, Henrik; Bilberg, Arne

    This exploratory study provides an overview over current state of manufacturing solutions in small and medium sized enterprises (SMEs) in region of Southern Denmark. Building on manufacturing paradigms, this paper reveals relevant aspects for the development and implementation of improving SMEs...... of manufacturing solutions, which are required to increase their competitiveness and assure sustainable growth....

  18. 78 FR 67117 - Manufacturing Council

    Science.gov (United States)

    2013-11-08

    ... preeminent destination for investment in manufacturing throughout the world'' as provided for in Section 4 of... the viewpoint of those stakeholders on current and emerging issues in the manufacturing sector. In... the U.S. manufacturing industry in terms of industry sectors, geographic locations, demographics, and...

  19. 2001 Industry Studies: Advanced Manufacturing

    Science.gov (United States)

    2001-05-28

    oriented, 19 and manufacturers are employing the Internet and associated information technologies to better integrate supply chains and form extended...ways to compete in world markets . As part of this ongoing transformation, the broad implementation of advanced manufacturing technologies , processes...competitive advantages and better performance in world markets . Importantly, advanced manufacturing involves the innovative integration of new technology

  20. Improvement of Theme Park Marketing Mode:A Case Study of Theme Parks in Chengdu

    Institute of Scientific and Technical Information of China (English)

    Min; LI; Gaoli; XIONG

    2013-01-01

    Construction of theme park has been launched since the early 1990s in Chengdu City,but ended up as a losing proposition after its short-term prosperity because of similar scale and similarity with those in other cities.As more international well-known theme parks entering the market,theme parks in Chengdu have been faced with the transition,and novel concepts are also introduced into the operation of these parks.To adapt to the market,it is imperative to make marketing strategies and combine marketing elements.Through analyzing current development of local theme parks and introducing successful marketing modes of domestic and overseas theme parks,a favorable marketing mode for theme parks in Chengdu was defined on the basis of fully exploring Ba-Shu culture(Ba and Shu are two ancient kingdoms in the history of Sichuan).By defining a favorable theme,focusing more on visitors’experience,devoting more in developing new products,adopting flexible price strategies,and integrating advertisement marketing,internet marketing,and other marketing methods,outstanding brands will be formed,and tourism cultures with distinguished features of Chengdu will be created.

  1. IMPORTANT INFORMATION - Flagstaff Car-Park and Park-and-Ride (P+R)

    CERN Document Server

    GS Department

    2011-01-01

    As part of the new arrangements following the arrival of the tram-line at CERN, an Automatic Number-Plate Recognition (ANPR) system has been installed restricting access to the Flagstaff Car-park and the Park-and-Ride (P+R) zone according to the conditions set out below: Holders of a valid P+R user card may enter the car-park at all hours but may only park in the area specifically designated as the P+R zone. P+R user cards can be purchased from the Fondation des Parkings de Genève (http://www.ge.ch/parkings/abonnements.html)   Members of CERN personnel and of contractors' personnel, whatever their status, may freely access the Flagstaff Car-Park at all hours, as long as their vehicle is duly registered with CERN, but they may not use the P+R zone, which is reserved for holders of P+R user cards. Please check that your vehicle number-plates are properly registered via AdaMS (http://cern.ch/adams). If this is not the case, the following action must be taken: - for private or co...

  2. An analysis of the number of parking bays and checkout counters for a supermarket using SAS simulation studio

    Science.gov (United States)

    Kar, Leow Soo

    2014-07-01

    Two important factors that influence customer satisfaction in large supermarkets or hypermarkets are adequate parking facilities and short waiting times at the checkout counters. This paper describes the simulation analysis of a large supermarket to determine the optimal levels of these two factors. SAS Simulation Studio is used to model a large supermarket in a shopping mall with car park facility. In order to make the simulation model more realistic, a number of complexities are introduced into the model. For example, arrival patterns of customers vary with the time of the day (morning, afternoon and evening) and with the day of the week (weekdays or weekends), the transport mode of arriving customers (by car or other means), the mode of payment (cash or credit card), customer shopping pattern (leisurely, normal, exact) or choice of checkout counters (normal or express). In this study, we focus on 2 important components of the simulation model, namely the parking area, the normal and express checkout counters. The parking area is modeled using a Resource Pool block where one resource unit represents one parking bay. A customer arriving by car seizes a unit of the resource from the Pool block (parks car) and only releases it when he exits the system. Cars arriving when the Resource Pool is empty (no more parking bays) leave without entering the system. The normal and express checkouts are represented by Server blocks with appropriate service time distributions. As a case study, a supermarket in a shopping mall with a limited number of parking bays in Bangsar was chosen for this research. Empirical data on arrival patterns, arrival modes, payment modes, shopping patterns, service times of the checkout counters were collected and analyzed to validate the model. Sensitivity analysis was also performed with different simulation scenarios to identify the parameters for the optimal number the parking spaces and checkout counters.

  3. Electronuclear Park, Privatization and Civil Strict Liability

    International Nuclear Information System (INIS)

    Mondello, Gerard Camille

    2008-01-01

    The civil strict liability regime of the electronuclear industry is a fundamental variable for preventing risk. Because prices of other energies as oil or gas are becoming higher and unpredictable, nuclear power becomes cost-effective and may favour the partial privatization of nuclear parks. By considering theoretical traditional liability models, we study the conditions that ensure the most efficient safety level when comparing natural monopoly situation and Bertrand duopoly. Our results are that natural monopoly is safer than duopoly only when strict liability is fully applied. We define conditions that neutralize risk for applying some privatization plan to nuclear park

  4. Scour Forecasting for Offshore Wind Parks

    DEFF Research Database (Denmark)

    Hartvig, Peres Akrawi

    In an effort to minimize the costs of offshore wind parks, the present research deals with optimizing a certain aspect of the support structure, namely the approach to scour. Scour is the phenomenon of seabed changes in the vicinity of the support structure that arises when the support structure......, scour forecasts facilitate the comparison between a scour design based on either deployment of scour-protection or enhanced structural design. The broad goal is to develop a method that produces accurate scour forecasts for offshore wind parks. The present research investigates more specifically which...

  5. Noise from cooling towers of power parks

    International Nuclear Information System (INIS)

    Zakaria, J.; Moore, F.K.

    1975-01-01

    A study is presented of the noise pollution problem for large power parks proposed for the future. Such parks might have an area of about 75 sq. miles, and a generating capacity up to 48000 MW. A comparative analysis has been done for natural and mechanical-draft wet towers as the major sources of acoustic power. Noise radiation from single isolated towers as well as from a dispersed array of towers has been considered for both types of cooling systems. Major noise attenuation effects considered are due to the atmospheric absorption and A-weighting. Conditions of 60F and 70 percent relative humidity in a still atmosphere have been assumed

  6. USGS considers moving Menlo Park programs

    Science.gov (United States)

    Showstack, Randy

    U.S. Interior Secretary Bruce Babbitt has instructed the U.S. Geological Survey to examine options to relocate staff and programs at the agency's 16-acre Menlo Park Facilities within 5 years. The agency was directed on August 21 to submit a preliminary action plan by September 25.A memo from USGS Director Gordon Eaton states that Babbitt is concerned about high real estate costs in the Menlo Park area and the need for the agency to locate near other Interior and federal offices.

  7. Hortobágy National Park

    Directory of Open Access Journals (Sweden)

    István Gyarmathy

    2017-06-01

    Full Text Available National parks and protected areas have an important role in protecting starry sky and the undisturbed nighttime environment. Hortobágy which is one of the darkest areas in Hungary, became an International Dark Sky Parks recently. Its significance is mostly related to the protection of the high biodiversity which is endangered by the effects of light pollution. A special monitoring program has been started to survey the nocturnal species and also to monitor the quality of the night sky using   digital cameras. Stargazing night walks are frequently organized. There is a high interest by the general public to attend these night adventures.

  8. Additive Manufacturing for Affordable Rocket Engines

    Science.gov (United States)

    West, Brian; Robertson, Elizabeth; Osborne, Robin; Calvert, Marty

    2016-01-01

    Additive manufacturing (also known as 3D printing) technology has the potential to drastically reduce costs and lead times associated with the development of complex liquid rocket engine systems. NASA is using 3D printing to manufacture rocket engine components including augmented spark igniters, injectors, turbopumps, and valves. NASA is advancing the process to certify these components for flight. Success Story: MSFC has been developing rocket 3D-printing technology using the Selective Laser Melting (SLM) process. Over the last several years, NASA has built and tested several injectors and combustion chambers. Recently, MSFC has 3D printed an augmented spark igniter for potential use the RS-25 engines that will be used on the Space Launch System. The new design is expected to reduce the cost of the igniter by a factor of four. MSFC has also 3D printed and tested a liquid hydrogen turbopump for potential use on an Upper Stage Engine. Additive manufacturing of the turbopump resulted in a 45% part count reduction. To understanding how the 3D printed parts perform and to certify them for flight, MSFC built a breadboard liquid rocket engine using additive manufactured components including injectors, turbomachinery, and valves. The liquid rocket engine was tested seven times in 2016 using liquid oxygen and liquid hydrogen. In addition to exposing the hardware to harsh environments, engineers learned to design for the new manufacturing technique, taking advantage of its capabilities and gaining awareness of its limitations. Benefit: The 3D-printing technology promises reduced cost and schedule for rocket engines. Cost is a function of complexity, and the most complicated features provide the largest opportunities for cost reductions. This is especially true where brazes or welds can be eliminated. The drastic reduction in part count achievable with 3D printing creates a waterfall effect that reduces the number of processes and drawings, decreases the amount of touch

  9. Additive Manufacturing: Unlocking the Evolution of Energy Materials.

    Science.gov (United States)

    Zhakeyev, Adilet; Wang, Panfeng; Zhang, Li; Shu, Wenmiao; Wang, Huizhi; Xuan, Jin

    2017-10-01

    The global energy infrastructure is undergoing a drastic transformation towards renewable energy, posing huge challenges on the energy materials research, development and manufacturing. Additive manufacturing has shown its promise to change the way how future energy system can be designed and delivered. It offers capability in manufacturing complex 3D structures, with near-complete design freedom and high sustainability due to minimal use of materials and toxic chemicals. Recent literatures have reported that additive manufacturing could unlock the evolution of energy materials and chemistries with unprecedented performance in the way that could never be achieved by conventional manufacturing techniques. This comprehensive review will fill the gap in communicating on recent breakthroughs in additive manufacturing for energy material and device applications. It will underpin the discoveries on what 3D functional energy structures can be created without design constraints, which bespoke energy materials could be additively manufactured with customised solutions, and how the additively manufactured devices could be integrated into energy systems. This review will also highlight emerging and important applications in energy additive manufacturing, including fuel cells, batteries, hydrogen, solar cell as well as carbon capture and storage.

  10. Measures of International Manufacturing and Trade of Clean Energy Technologies

    Energy Technology Data Exchange (ETDEWEB)

    Engel-Cox, Jill; Sandor, Debbie; Keyser, David; Mann, Margaret

    2017-05-25

    The technologies that produce clean energy, such as solar photovoltaic panels and lithium ion batteries for electric vehicles, are globally manufactured and traded. As demand and deployment of these technologies grows exponentially, the innovation to reach significant economies of scale and drive down energy production costs becomes less in the technology and more in the manufacturing of the technology. Manufacturing innovations and other manufacturing decisions can reduce costs of labor, materials, equipment, operating costs, and transportation, across all the links in the supply chain. To better understand the manufacturing aspect of the clean energy economy, we have developed key metrics for systematically measuring and benchmarking international manufacturing of clean energy technologies. The metrics are: trade, market size, manufacturing value-added, and manufacturing capacity and production. These metrics were applied to twelve global economies and four representative technologies: wind turbine components, crystalline silicon solar photovoltaic modules, vehicle lithium ion battery cells, and light emitting diode packages for efficient lighting and other consumer products. The results indicated that clean energy technologies are being developed via complex, dynamic, and global supply chains, with individual economies benefiting from different technologies and links in the supply chain, through both domestic manufacturing and global trade.

  11. Good manufacturing practice

    International Nuclear Information System (INIS)

    Schlyer, D.J.

    2001-01-01

    In this presentation author deals with the Implementation of good manufacturing practice for radiopharmaceuticals. The presentation is divided into next parts: Batch size; Expiration date; QC Testing; Environmental concerns; Personnel aspects; Radiation concerns; Theoretical yields; Sterilizing filters; Control and reconciliation of materials and components; Product strength; In process sampling and testing; Holding and distribution; Drug product inspection; Buildings and facilities; Renovations at BNL for GMP; Aseptic processing and sterility assurance; Process validation and control; Quality control and drug product stability; Documentation and other GMP topics; Building design considerations; Equipment; and Summary

  12. Parks, Place and Pedagogy - Education Partnerships with the National Park Service

    Science.gov (United States)

    Vye, E. C.; Rose, W. I.; Nash, B.; Klawiter, M.; Huntoon, J. E.; Engelmann, C. A.; Gochis, E. E.; MiTEP

    2011-12-01

    The Michigan Teaching Excellence Program (MITEP) is a multi-year program of teacher leadership development that empowers science teachers in Grand Rapids, Kalamazoo, and Jackson to lead their schools and districts through the process of improving science teaching and learning. A component of this program is facilitated through partnership between academia, K-12 educators, and the National Park Service (NPS) that aims to develop place-based education strategies that improve diversity and Earth Science literacy. This tangible education method draws upon both the sense of place that National Parks offer and the art of interpretation employed by the park service. Combined, these deepen cognitive process and provide a more diverse reflection of what place means and the processes behind shaping what we see. Our partnerships present participants the opportunity to intern in a Midwest national park for 3-8 weeks during their third year in the program. In summer 2011, eleven teachers from the Grand Rapids school district participated in this innovative way of learning and teaching Earth Science. One goal was to develop geological interpretive materials desired and needed for the parks. Secondly, and important to place-based educational methodologies, these deliverables will be used as a way of bringing the parks to urban classrooms. Participants lived in the parks and worked directly with both national park and Michigan Tech staff to create lesson plans, podcasts, media clips, video, and photographic documentation of their experiences. These lesson plans will be hosted in the Views of the National Park website in an effort to provide innovative teaching resources nationally for teachers or free-choice learners wishing to access information on Midwest national parks. To the benefit of park staff, working with teachers from urban areas offered an opportunity for park staff to access diverse learners in urban settings unable to visit the park. The foundation has been laid for

  13. To the problem of reliability standardization in computer-aided manufacturing at NPP units

    International Nuclear Information System (INIS)

    Yastrebenetskij, M.A.; Shvyryaev, Yu.V.; Spektor, L.I.; Nikonenko, I.V.

    1989-01-01

    The problems of reliability standardization in computer-aided manufacturing of NPP units considering the following approaches: computer-aided manufacturing of NPP units as a part of automated technological complex; computer-aided manufacturing of NPP units as multi-functional system, are analyzed. Selection of the composition of reliability indeces for computer-aided manufacturing of NPP units for each of the approaches considered is substantiated

  14. Economic Valuation of Urban Trees: Ribnjak Park Case Study, Zagreb

    Directory of Open Access Journals (Sweden)

    Karlo Beljan

    2015-06-01

    Full Text Available Background and Purpose: Population growth, urbanisation and technological development are creating a growing need for urban forests and parks, which are becoming green oases for recreation and relaxation. Apart from the sociological and economic components, urban forest valuation is presented through tourism, the market value of main and secondary forest products, and the growing value of real estate in the vicinity of green areas. Environmental economics explores the optimal ratio between the costs and the benefits received from the investment in the environment. The aim of this research is monetary valuation of urban trees. Materials and Methods: A Danish model for tree value determination was applied in Ribnjak Park as a case study. The model is based on tree growing costs and the present value. It is limited by the subjective aesthetic tree value estimation, but it is used in Europe because of its practicality. Individual tree value estimation is used because of the tree damage from vehicles or new residential buildings. The method is suitable for individual trees or groups of trees, but it is not appropriate for forest stands. Twenty random selected trees from nine different tree species have been analysed in the park. Diameter at breast height, tree height, expected age, aesthetic value and location were recorded for each tree. Furthermore, ecological, social and health tree values were taken into account separately with the calculation of points. Results: According to the evaluation, the average monetary value of one tree in Ribnjak Park is 542 EUR. The average diameter at breast height is 57.86 cm with the average age of 96.14 years. Plane trees have the highest value in comparison to other sampled species. Conclusions: Tree values vary depending on age, dimension or aesthetic values. The disadvantage of this method is in the estimation of very old tree value and in high involvement of personal estimation, which creates an opportunity

  15. Strategies for sustainable development of industrial park in Ulsan, South Korea--from spontaneous evolution to systematic expansion of industrial symbiosis.

    Science.gov (United States)

    Park, Hung-Suck; Rene, Eldon R; Choi, Soo-Mi; Chiu, Anthony S F

    2008-04-01

    The Korea National Cleaner Production Center (KNCPC) affiliated to the Korea Institute of Industrial Technology (KITECH) has started a 15 year, 3-phase EIP master plan with the support of Ministry of Commerce, Industry, and Energy (MOCIE). A total of 6 industrial parks, including industrial parks in Ulsan city, known as the industrial capital of South Korea, are planning projects to find the feasibility of shifting existing industrial parks to eco-industrial parks. The basic survey shows that Ulsan industrial complex has been continuously evolving from conventional industrial complexes to eco-industrial parks by spontaneous industrial symbiosis. This paper describes the Korean national policies and the developmental activities of this vision to drive the global trend of innovation for converting the existing industrial parks to eco-industrial parks through inter-industry waste, energy, and material exchange in Ulsan Industrial complexes. In addition, the primary and supportive components of the Ulsan EIP pilot project, which will be implemented for 5 years is elaborated with its schedules and economic benefits.

  16. Evaluation of tomographic ISOCAM Park II gamma camera parameters using Monte Carlo method

    International Nuclear Information System (INIS)

    Oramas Polo, Ivón

    2015-01-01

    In this paper the evaluation of tomographic ISOCAM Park II gamma camera parameters was performed using the Monte Carlo code SIMIND. The parameters uniformity, resolution and contrast were evaluated by Jaszczak phantom simulation. In addition the qualitative assessment of the center of rotation was performed. The results of the simulation are compared and evaluated against the specifications of the manufacturer of the gamma camera and taking into account the National Protocol for Quality Control of Nuclear Medicine Instruments of the Cuban Medical Equipment Control Center. A computational Jaszczak phantom model with three different distributions of activity was obtained. They can be used to perform studies with gamma cameras. (author)

  17. Kultusjoonisflm "South Park" on päral

    Index Scriptorium Estoniae

    2000-01-01

    Tänasest "Kosmoses" animafilm "South Park : suurem, pikem ja lõikamata" ("South Park . Bigger, Longer & Uncut") : Stsenaristid Trey Parker ja Matt Stone : režissöör Trey Parker : Ameerika Ühendriigid 1999

  18. Metal concentrations from permeable pavement parking lot in Edison, NJ

    Data.gov (United States)

    U.S. Environmental Protection Agency — The U.S. Environmental Protection Agency constructed a 4000-m2 parking lot in Edison, New Jersey in 2009. The parking lot is surfaced with three permeable pavements...

  19. EnviroAtlas - Portland, ME - Park Access by Block Group

    Data.gov (United States)

    U.S. Environmental Protection Agency — This EnviroAtlas dataset shows the block group population that is within and beyond an easy walking distance (500m) of a park entrance. Park entrances were included...

  20. Vegetation - Anza-Borrego Desert State Park [ds165

    Data.gov (United States)

    California Natural Resource Agency — The Anza Borrego Desert State Park (ABDSP) Vegetation Map depicts vegetation within the Park and its surrounding environment. The map was prepared by the Department...

  1. More Effective Use of Urban Space by Autonomous Double Parking

    Directory of Open Access Journals (Sweden)

    Rafael Estepa

    2017-01-01

    Full Text Available The new capabilities of autonomous cars can be used to mitigate to a large extent safety concerns and nuisance traditionally associated with double parking. In this paper double parking for autonomous cars is proposed as a new approach to temporarily increase parking capacity in locations in clear need for extra provision when best alternatives cannot be found. The basic requirements, operation, and procedures of the proposed solution are outlined. A curbside parking has been simulated implementing the suggested double parking operation and important advantages have been identified for drivers, the environment, and the city. Double parking can increase over 50% the parking capacity of a given area. Autonomous car owners would (at least double their probabilities of finding parking compared to traditional drivers, saving cruising time and emissions. However, significant work and technological advances are still needed in order to make this feasible in the near future.

  2. Environmental aspects of parking garages. Living in a compact city

    International Nuclear Information System (INIS)

    Koopmans, J.F.W.; Suverkoop, D.J.

    2005-01-01

    An overview is given of environmental aspects of parking garages in the Netherlands with respect to environmental legislation and regulations, focusing on noise pollution, lighting aspects (of cars and the parking buildings), air quality, and fire safety [nl

  3. 36 CFR 7.56 - Acadia National Park.

    Science.gov (United States)

    2010-07-01

    ... intersection north to the gate at Penobscot Mountain Parking Area) and connecting roads as follows: Paradise... from the parking area at the north end of Eagle Lake down the east side of the lake to connection with...

  4. OPINION: Safe exponential manufacturing

    Science.gov (United States)

    Phoenix, Chris; Drexler, Eric

    2004-08-01

    In 1959, Richard Feynman pointed out that nanometre-scale machines could be built and operated, and that the precision inherent in molecular construction would make it easy to build multiple identical copies. This raised the possibility of exponential manufacturing, in which production systems could rapidly and cheaply increase their productive capacity, which in turn suggested the possibility of destructive runaway self-replication. Early proposals for artificial nanomachinery focused on small self-replicating machines, discussing their potential productivity and their potential destructiveness if abused. In the light of controversy regarding scenarios based on runaway replication (so-called 'grey goo'), a review of current thinking regarding nanotechnology-based manufacturing is in order. Nanotechnology-based fabrication can be thoroughly non-biological and inherently safe: such systems need have no ability to move about, use natural resources, or undergo incremental mutation. Moreover, self-replication is unnecessary: the development and use of highly productive systems of nanomachinery (nanofactories) need not involve the construction of autonomous self-replicating nanomachines. Accordingly, the construction of anything resembling a dangerous self-replicating nanomachine can and should be prohibited. Although advanced nanotechnologies could (with great difficulty and little incentive) be used to build such devices, other concerns present greater problems. Since weapon systems will be both easier to build and more likely to draw investment, the potential for dangerous systems is best considered in the context of military competition and arms control.

  5. INTEGRATED AUTOMOTIVE MANUFACTURING SUPPLY

    Directory of Open Access Journals (Sweden)

    P.J.S. Van Dyk

    2012-01-01

    Full Text Available

    ENGLISH ABSTRACT: Supply planning and traffic flow planning are major activities in the automotive manufacturing environment worldwide. Traditionally, the impact of supply planning strategies on plant traffic is rarely considered. This paper describes the development of a Decision Support System (DSS that will assist automotive manufacturers to analyse the effect of supply planning decisions on plant traffic during the supply planning phase of their logistics planning process. In essence, this DSS consists of a Supply Medium Decision Support Tool (SMDST (an interactive MS-Excel model with Visual Basic interfacing and a traffic flow simulation model tool (using eMPlant simulation software.

    AFRIKAANSE OPSOMMING: Verskaffingsbeplanning en verkeersvloeibeplanning is belangrike aktiwiteite in die motorvervaardigingsbedryf wêreldwyd. Tradisioneel word die uitwerking van verskaffings-beplanningsstrategië op aanlegverkeer selde in ag geneem. Hierdie artikel beskryf die ontwikkeling van ’n Besluitnemings Ondersteuningstelsel (DSS wat motorvervaardigers sal ondersteun in die analise van die effek van verskaffingsbeplanningbesluite op aanlegverkeer tydens die verskaffingsbeplanningsfase van hulle logistieke beplanningsproses. Hierdie DSS bestaan hoofsaaklik uit ’n Verskaffings-vervoermiddel Besluitnemingshulpmiddel (SMDST (’n interaktiewe MS-Excel model met “Visual Basic” koppelling asook ’n simulasiemodel van verkeersvloei (met eM-Plant simulasiesagteware.

  6. Certification of Additive Manufacturing Processing Parameters through Physics-Based Predictive Simulation of Process-Defects-Microstructure

    Data.gov (United States)

    National Aeronautics and Space Administration — Additive manufacturing (AM), also known as 3D printing, is a next generation technology for cost-effective and accelerated way of manufacturing complex-shaped...

  7. Tools for valuing tree and park services

    Science.gov (United States)

    E.G. McPherson

    2010-01-01

    Arborists and urban foresters plan, design, construct, and manage trees and parks in cities throughout the world. These civic improvements create walkable, cool environments, save energy, reduce stormwater runoff, sequester carbon dioxide, and absorb air pollutants. The presence of trees and green spaces in cities is associated with increases in property values,...

  8. Learning Physics in a Water Park

    Science.gov (United States)

    Cabeza, Cecilia; Rubido, Nicolás; Martí, Arturo C.

    2014-01-01

    Entertaining and educational experiments that can be conducted in a water park, illustrating physics concepts, principles and fundamental laws, are described. These experiments are suitable for students ranging from senior secondary school to junior university level. Newton's laws of motion, Bernoulli's equation, based on the conservation of…

  9. Wireless Sensor Network Based Smart Parking System

    Directory of Open Access Journals (Sweden)

    Jeffrey JOSEPH

    2014-01-01

    Full Text Available Ambient Intelligence is a vision in which various devices come together and process information from multiple sources in order to exert control on the physical environment. In addition to computation and control, communication plays a crucial role in the overall functionality of such a system. Wireless Sensor Networks are one such class of networks, which meet these criteria. These networks consist of spatially distributed sensor motes which work in a co-operative manner to sense and control the environment. In this work, an implementation of an energy-efficient and cost-effective, wireless sensor networks based vehicle parking system for a multi-floor indoor parking facility has been introduced. The system monitors the availability of free parking slots and guides the vehicle to the nearest free slot. The amount of time the vehicle has been parked is monitored for billing purposes. The status of the motes (dead/alive is also recorded. Information like slot allocated, directions to the slot and billing data is sent as a message to customer’s mobile phones. This paper extends our previous work 1 with the development of a low cost sensor mote, about one tenth the cost of a commercially available mote, keeping in mind the price sensitive markets of the developing countries.

  10. New Hyde Park Public Library; A Study.

    Science.gov (United States)

    Nassau Library System, Garden City, NY.

    In the fall of 1974, the Nassau County Library System conducted a study of the New Hyde Park Public Library at the request of that library's directing board. Relevant documents and statistics were reviewed, building usage was studied, and the library staff and community organizations were questioned. The library was analyzed in terms of the…

  11. The spanish radiotherapy park: past and present

    International Nuclear Information System (INIS)

    Tormo Ferrero, Manuel J.

    2001-01-01

    The present article has as objective to provide a general overview on the spanish radiotherapy park, presenting how was its start and evolution until the current state. Considering only the units of teletherapy and the accelerators. Actually in Spain there is 28 units of Cobalt therapy, in functioning during the last two decades, being advised a rapid substitution to accelerators

  12. case study of ramat park benin city

    African Journals Online (AJOL)

    user

    SETTLEMENT: CASE STUDY OF RAMAT PARK BENIN CITY. E. S. Okonofua1, R. ... region on a daily basis. The movement of ... with major road networks [2]. In order to ease ... led to series of research and development of traffic noise models.

  13. 76 FR 22001 - National Park Week, 2011

    Science.gov (United States)

    2011-04-20

    .... America is fortunate to have a long history of conservation pioneers, like President Theodore Roosevelt... National Park Week, 2011 By the President of the United States of America A Proclamation Every day, America... and vitality of all Americans. In no place is America's natural and historic legacy more evident than...

  14. Security issues in a parking facility.

    Science.gov (United States)

    Gutman, Abraham; Lew, I Paul

    2009-01-01

    Active security supported by passive security measures which are part of the physical design of a parking facility are essential to preventing crimes from happening wherever and whenever possible, the authors maintain. In the article, they focus on design elements which can be most effective in discouraging potential perpetrators.

  15. Optimized power generation in offshore wind parks

    NARCIS (Netherlands)

    Oliveira Filho, J. de; Papp, Z.

    2011-01-01

    Electricity generation on offshore wind parks has an increasing economic importance - the European Commission foresees that 12% of the wind energy will be produced on offshore installations by 2020, and this share is likely to increase further in the following years. However, the continuously

  16. Park design between community and professionals

    NARCIS (Netherlands)

    Brinkhuijsen, Marlies; Steenhuis, Marinke

    2015-01-01

    The Zevenkamp district in eastern Rotterdam conceals a specimen of Dutch landscape architecture from the early 1980s - the Wollefoppenpark and Noordelijk Wijkpark, a structure of green spaces connecting the district with the open polder landscape. The park was designed as a robust framework that

  17. Autonomous Robot Navigation In Public Nature Park

    DEFF Research Database (Denmark)

    Andersen, Jens Christian; Andersen, Nils Axel; Ravn, Ole

    2005-01-01

    This extended abstract describes a project to make a robot travel autonomously across a public nature park. The challenge is to detect and follow the right path across junctions and open squares avoiding people and obstacles. The robot is equipped with a laser scanner, a (low accuracy) GPS, wheel...

  18. the Avian Park Service Learning Centre story

    African Journals Online (AJOL)

    The Ukwanda Centre for Rural Health (UCRH) opened in 2001, followed 10 years later by the establishment of the Ukwanda Rural Clinical School in one of the rural health districts of the Western Cape. This paper relates the journey of the Faculty with the underserviced community of Avian Park through the provision of ...

  19. An Environmental Ethic for Parks and Recreation.

    Science.gov (United States)

    McAvoy, Leo

    1990-01-01

    Suggests an environmental ethic for parks and recreation professionals who are often on the wrong side of the environmental controversy because they lack a professional ethic. This article provides a guide for implementing an environmental ethic, noting that philosophy of service must be grounded in ecological principles, not merchant values. (SM)

  20. Bodie State Historic Park. Teacher's Guide.

    Science.gov (United States)

    California State Dept. of Parks and Recreation, Sacramento.

    This guide is intended to assist teachers in organizing and preparing a field trip to Bodie State Historic Park (California). Although it is intended to assist in the trip to Bodie, it also provides information for organizing group tours or family outings to other areas. Activities include before, during, and after visit exercises focusing on the…

  1. PARK2 orchestrates cyclins to avoid cancer

    Czech Academy of Sciences Publication Activity Database

    Bartek, Jiří; Hodný, Zdeněk

    2014-01-01

    Roč. 46, č. 6 (2014), s. 527-528 ISSN 1061-4036 Institutional support: RVO:68378050 Keywords : PARK2 * G1/S-phase cyclin * cancer Subject RIV: EB - Genetics ; Molecular Biology Impact factor: 29.352, year: 2014

  2. Gleaning and Dreaming on Car Park Beach

    Directory of Open Access Journals (Sweden)

    Jo Croft

    2018-04-01

    Full Text Available This article explores beachcombing and gleaning as practices that combine mobility with daydreaming and which allow us to experience our environment with the perception of ‘tactile nearness’ (Benjamin. Through eco-poetics shaped by ‘inconceivable analogies and connections’ (Benjamin, the author re-imagines a neglected space used as a short-cut on the way to work—the Liverpool Adelphi car park in Liverpool—as “Car Park Beach”. Inspired by the situationists’ slogan ‘Sous les pavés, la plage’, the author argues that Car Park Beach opens up imaginative possibilities for a different form of ecological encounter with our own precarity, one ushered in by a ‘close-up’ awareness of how waste transforms our world. Car Park Beach is a site that the author associates with the drift-like, distracted movements of both people and matter, and this article therefore attempts to deploy an equivalent method of analysis. Drawing on her own practice of gleaning photos and objects on the way to work, the author places a vocabulary of flotsam and jetsam at the axis of her discussion. Allusive, often layered, connections are followed between a diverse range of sources including beachcombing guides, literary memoirs, documentary films, eco-criticism, and auto-ethnography.

  3. Declining national park visitation: An economic analysis

    Science.gov (United States)

    Thomas H. Stevens; Thomas A. More; Marla. Markowski-Lindsay

    2014-01-01

    Visitation to the major nature-based national parks has been declining. This paper specifies an econometric model that estimates the relative impact of consumer incomes, travel costs, entry fees and other factors on per capita attendance from 1993 to 2010. Results suggest that entrance fees have had a statistically significant but small impact on per capita attendance...

  4. Multiple-Layer Parking with Screening

    NARCIS (Netherlands)

    van Enter, Aernout; Fleurke, Sjoert; Rudas, Imre J.

    2015-01-01

    In this article a multilayer parking system with screening of size n = 3 is studied with a focus on the time-dependent particle density. We prove that the asymptotic limit of the particle density increases from an average density of 1/3 on the first layer to the value of (10 − √5 )/19 ≈ 0.4086 in

  5. Readerly and Writerly "Letters from the Park."

    Science.gov (United States)

    Conde, Susana

    1993-01-01

    Discusses in depth the film "Cartas del parque" ("Letters from the Park"), the first of six films in the "Amores Dificiles" series. Notes that the film is pervaded by the traditional overdetermination of gender roles. Suggests that an intrusive and authoritative narrator makes of this both a "readerly" and a…

  6. Park World Tour Hiinas / Timo Sild

    Index Scriptorium Estoniae

    Sild, Timo, 1988-

    2012-01-01

    Reisikiri Eesti sportlaste osalemisest septembris Hiinas korraldatud Park World Tour orienteerumisvõistlustel - Changchunis toimunud kahepäevasel Vasa orienteerumisfestivalil, Chongqingi lähistel toimunud Hiina meistrivõistlustel orienteerumissprindis ja Wanshengis toimunud lühiraja Hiina meistrivõistlustel ning Bekingi botaanikaaias toimunud keskkooli ja ülikooli meistrivõistlustel

  7. 75 FR 20885 - National Park Week, 2010

    Science.gov (United States)

    2010-04-21

    ... hope at the Statue of Liberty to the harrowing Battle of Gettysburg and the quest for freedom on the... Part II The President Proclamation 8498--National Park Week, 2010 Proclamation 8499--National... / Presidential Documents#0;#0; #0; #0;Title 3-- #0;The President [[Page 20887

  8. On park design : looking beyond the wars

    NARCIS (Netherlands)

    Oneka, M.

    1996-01-01


    The present book opens with an account of a buffalo hunt in the company of soldiers in one of the national parks in Uganda. One buffalo was hit close to the heart but fled away as if it was not fatally wounded. The soldiers seeing it flee, fired more rounds of ammunition at it until, with

  9. Reducing Rockfall Risk in Yosemite National Park

    Science.gov (United States)

    Stock, Greg M.; Collins, Brian D.

    2014-07-01

    Yosemite National Park preserves some of the world's most spectacular geological scenery, including icons such as Half Dome and El Capitan. The glacially sculpted granite walls of Yosemite Valley attract 4 million visitors a year, but rockfalls from these cliffs pose substantial hazards (Figure 1).

  10. Adoption of wireless internet parks: An empirical study in Qatar

    OpenAIRE

    Weerakkody, V

    2008-01-01

    This paper examines the adoption of free wireless internet parks (iPark) by Qatari citizens as means of accessing electronic services from public parks. The Qatar government has launched the iPark concept with a view of providing free internet access for all citizens while enjoying the outdoors. By offering free wireless Internet access, the Qatari government encourages its citizen's to actively participate in the global information society with a view of bridging the digital divide. Using a ...

  11. PALESTINE AUTOMOTIVE LICENSE IDENTITY RECOGNITION FOR INTELLIGENT PARKING SYSTEM

    OpenAIRE

    ANEES ABU SNEINEH; WAEL A. SALAH

    2017-01-01

    Providing employees with protection and security is one of the key concerns of any organization. This goal can be implemented mainly by managing and protecting employees’ cars in the parking area. Therefore, a parking area must be managed and organized with smart technologies and tools that can be applied and integrated in an intelligent parking system. This paper presents the tools based on image recognition technology that can be used to effectively control various parts of a parking sys...

  12. Advanced Engineering Environments: Implications for Aerospace Manufacturing

    Science.gov (United States)

    Thomas, D.

    2001-01-01

    There are significant challenges facing today's aerospace industry. Global competition, more complex products, geographically-distributed design teams, demands for lower cost, higher reliability and safer vehicles, and the need to incorporate the latest technologies quicker all face the developer of aerospace systems. New information technologies offer promising opportunities to develop advanced engineering environments (AEEs) to meet these challenges. Significant advances in the state-of-the-art of aerospace engineering practice are envisioned in the areas of engineering design and analytical tools, cost and risk tools, collaborative engineering, and high-fidelity simulations early in the development cycle. These advances will enable modeling and simulation of manufacturing methods, which will in turn allow manufacturing considerations to be included much earlier in the system development cycle. Significant cost savings, increased quality, and decreased manufacturing cycle time are expected to result. This paper will give an overview of the NASA's Intelligent Synthesis Environment, the agency initiative to develop an AEE, with a focus on the anticipated benefits in aerospace manufacturing.

  13. Increase of manufacturability of manufacturing of difficult profile details

    Directory of Open Access Journals (Sweden)

    О.Ye. Semenovskiy

    2017-12-01

    Full Text Available The analysis of existing problems arising in the process of manufacturing such complex profile parts as gears is carried out. The possible ways of simplifying the technological processes with the aim of improving the economic performance of production, as well as reducing the defect are defined. The carried out researches of influence of chemical composition of steel, its structural parameters on technological characteristics. The choice of compositions of the chemical composition of steel with the optimal ratio of physical-mechanical and technological characteristics is substantiated. The causes of deformation of parts in the process of heat treatment are established. The developed criteria for estimating this value. At the same time, the task of not only qualitative but also quantitative evaluation of such technological properties as the propensity of steels to deformation in the course of chemical-thermal treatment is solved, with the aim of introducing a single characteristic that determines the tendency of the steel to deform during hardening. Reducing the propensity of steel to deformation allowed to increase the economic performance of production by reducing the number of finishing operations.

  14. Cloud manufacturing distributed computing technologies for global and sustainable manufacturing

    CERN Document Server

    Mehnen, Jörn

    2013-01-01

    Global networks, which are the primary pillars of the modern manufacturing industry and supply chains, can only cope with the new challenges, requirements and demands when supported by new computing and Internet-based technologies. Cloud Manufacturing: Distributed Computing Technologies for Global and Sustainable Manufacturing introduces a new paradigm for scalable service-oriented sustainable and globally distributed manufacturing systems.   The eleven chapters in this book provide an updated overview of the latest technological development and applications in relevant research areas.  Following an introduction to the essential features of Cloud Computing, chapters cover a range of methods and applications such as the factors that actually affect adoption of the Cloud Computing technology in manufacturing companies and new geometrical simplification method to stream 3-Dimensional design and manufacturing data via the Internet. This is further supported case studies and real life data for Waste Electrical ...

  15. Elgon/Kibale National Parks carbon sequestration projects

    OpenAIRE

    Face Foundation

    2007-01-01

    Metadata only record In Uganda we are collaborating with the Uganda Wildlife Authority (UWA), one of whose tasks is to manage the country's national parks. We are jointly implementing forest restoration projects in Mount Elgon National Park and Kibale National Park. PES-1 (Payments for Environmental Services Associate Award)

  16. Relevance of Industrial and Science Parks to Industrial ...

    African Journals Online (AJOL)

    Here, we reviewed the impact of Industrial and Science Parks on industrial ... and stimulate the development of small and medium size enterprises as a base for ... In order to achieve these, emphasis should be on establishing Industrial and ... transfer, industrial park, Science Park, industrial development, innovation, ...

  17. SmartPark Technology Demonstration Project, Phase II: Final Report

    Science.gov (United States)

    2018-05-01

    The purpose of FMCSA's SmartPark project was to determine the feasibility of a technology for providing truck parking space availability information in real time to truckers on the road. SmartPark consisted of two phases. Phase I was a field operatio...

  18. Design and simulation of 120 capacity automobile parking control ...

    African Journals Online (AJOL)

    Design and simulation of 120 capacity automobile parking control system using up/down decade counters. ... leave(s) the parking lot through the exit gate the counter counts down, and the DC motor circuitry drives the entry gate open to allow access for the same number of automobiles that leave(s) the parking lot.

  19. Managing urban parks for a racially and ethnically diverse clientele

    Science.gov (United States)

    Paul H. Gobster

    2002-01-01

    A major planning effort for Chicago's largest park provided an opprotunity yto examine outdoor recreation use patterns and preferences among a racially and ethnically diverse clientele. Results from on-site surveys of 898 park users (217 Black, 210 Latino, 182 Asian, and 289 White) showed that park users shared a core set of interests, preferences, and concerns...

  20. 36 CFR 910.33 - Off-street parking.

    Science.gov (United States)

    2010-07-01

    ... for parking spaces is as follows: (1) Hotel: One parking space for each four sleeping rooms or suites; (2) Places of public assemblage other than hotels: (i.e., arena, armory, theater, auditorium...; (3) Retail, trade, and service establishments: one parking space for each 750 square feet of gross...

  1. THE PROBLEM OF INTERCEPTING PARKING SYSTEMS DESIGN IN CITIES

    Directory of Open Access Journals (Sweden)

    E. Hetsovych

    2014-10-01

    Full Text Available Consistent determination of the main problems concerning the system of intercepting parking – lot design with the purpose of transport systems improvement downtown is grounded. The given approach allows to fully satisfy the demand for parking-lots of urban transport systems in combination with the system of downtown parkings and the capacity of the highway network.

  2. Tourism package preferences of West Virginia state park visitors

    Science.gov (United States)

    William Gravley; John Dengler; Roy Ramthun; Chad Pierskalla

    2009-01-01

    This study was a preliminary examination of the activity and spending behavior of visitors to Pipestem State Park in West Virginia. This state park is being used as a case study area to determine whether a new fish stocking program accompanied by appropriate marketing activities can increase park visitation by anglers and other sports-oriented people. The research was...

  3. 36 CFR 7.14 - Great Smoky Mountains National Park.

    Science.gov (United States)

    2010-07-01

    ... possession of any form of fish bait other than artificial flies or lures on any park stream while in... nonresident license issued by either State may fish throughout the park irrespective of State boundaries... the park boundary are open to fishing in accordance with the Cherokee Fish and Game Management...

  4. Air quality effects of urban trees and parks

    Science.gov (United States)

    David Nowak; Gordon Heisler

    2010-01-01

    Parks are significant parts of the urban landscape and comprise about 6% of city and town areas in the conterminous United States. These urban parks are estimated to contain about 370 million trees with a structural value of approximately $300 billion. The number of park trees varies by region of the country, but they can produce significant air quality effects in and...

  5. Recreational user attitudes towards management strategies of Allegany State Park

    Science.gov (United States)

    Michael Nisengard; Miklos Gratzer

    1998-01-01

    This project examines attitudes towards management strategies of four Allegany State Park recreational user groups: cabin users, recreational vehicle users, tent users, and day users. It investigates recreational user group attitude differences, and attitude change over a ten year time period, in regard to the following park management strategy categories: park...

  6. Alternative Fuels Data Center: Yellowstone Park Recycles Vehicle Batteries

    Science.gov (United States)

    for Solar Power Yellowstone Park Recycles Vehicle Batteries for Solar Power to someone by E -mail Share Alternative Fuels Data Center: Yellowstone Park Recycles Vehicle Batteries for Solar Power on Facebook Tweet about Alternative Fuels Data Center: Yellowstone Park Recycles Vehicle Batteries

  7. 40 CFR 52.1135 - Regulation for parking freeze.

    Science.gov (United States)

    2010-07-01

    ... facility. (3) The phrase commercial parking space means a space used for parking a vehicle in a commercial..., garage, building or structure, or combination or portion thereof, on or in which motor vehicles are..., the total quantity of commercial parking spaces available for use at the same amounts as were...

  8. 76 FR 40322 - Mt. Hood Meadows Ski Resort Parking Improvements

    Science.gov (United States)

    2011-07-08

    ... fleet. Also, the location of the current maintenance shop impedes traffic flow and removes potential... new Sunrise Vehicle Maintenance Shop on the north side of the Sunrise parking lot. DATES: Comments... increasing parking capacity and improving traffic flow in at Mt. Hood Meadows Ski Resort. Parking capacity...

  9. 36 CFR 1280.12 - Is parking available?

    Science.gov (United States)

    2010-07-01

    ... Market Street (in Philadelphia) and the National Archives at New York City do not have onsite parking... Section 1280.12 Parks, Forests, and Public Property NATIONAL ARCHIVES AND RECORDS ADMINISTRATION NARA... on Using Nara Facilities § 1280.12 Is parking available? (a) The National Archives Building. There is...

  10. 36 CFR 7.33 - Voyageurs National Park.

    Science.gov (United States)

    2010-07-01

    ... REGULATIONS, AREAS OF THE NATIONAL PARK SYSTEM § 7.33 Voyageurs National Park. (a) Fishing. Unless otherwise... intersection with the Black Bay to Moose Bay portage, across Locator, War Club, Quill, Loiten, and Shoepack... management, weather, and park management objectives. (4) Maps showing the designated routes are available at...

  11. Manufacturing Renaissance : Return of manufacturing to western countries

    OpenAIRE

    Kianian, Babak; Larsson, Tobias; Tavassoli, Mohammad

    2013-01-01

    This chapter argues that the location of manufacturing is gradually shifting to the west again, exemplifying the ‘manufacturing renaissance’. Such a claim is based on the recent observed trend and the discussion is contextualized within the established theory that has been able to explain the location of manufacturing, that is, the product life cycle (PLC) model. Then the chapter identifies and discusses the four main drivers of this new phenomenon: (i) rising wage levels in emerging economie...

  12. Competitive manufacturing strategies for the manufacturing industries in Turkey

    OpenAIRE

    Ulusoy, Gündüz; Ulusoy, Gunduz

    2003-01-01

    In this study, results of the research into competitive manufacturing strategies of companies in four different sector studies covering 82 companies from the electronics, cement, automotive manufacturers, and appliances part and component suppliers in Turkey are presented. The data used in the study are gathered by conducting four sector surveys in 1997 and 1998 using a questionnaire supported by some follow-up interviews and site visits. A competitive manufacturing strategy is represented he...

  13. Correspondence of perceived vs. objective proximity to parks and their relationship to park-based physical activity

    Directory of Open Access Journals (Sweden)

    Kaczynski Andrew T

    2009-08-01

    Full Text Available Abstract Background Parks are key environmental resources for encouraging population-level physical activity (PA. In measuring availability of parks, studies have employed both self-reported and objective indicators of proximity, with little correspondence observed between these two types of measures. However, little research has examined how the degree of correspondence between self-reported and objectively-measured distance to parks is influenced by individual, neighborhood, and park-related variables, or which type of measure is more strongly related to physical activity outcomes. Methods We used data from 574 respondents who reported the distance to their closest park and compared this with objective measurements of proximity to the closest park. Both indicators were dichotomized as having or not having a park within 750 m. Audits of all park features within this distance were also conducted and other personal characteristics and neighborhood context variables (safety, connectedness, aesthetics were gleaned from participants' survey responses. Participants also completed detailed seven-day PA log booklets from which measures of neighborhood-based and park-based PA were derived. Results Agreement was poor in that only 18% of respondents achieved a match between perceived and objective proximity to the closest park (kappa = 0.01. Agreement was higher among certain subgroups, especially those who reported engaging in at least some park-based PA. As well, respondents with a greater number of parks nearby, whose closest park had more features, and whose closest park contained a playground or wooded area were more likely to achieve a match. Having a ball diamond or soccer field in the closest park was negatively related to achieving a match between perceived and objective proximity. Finally, engaging in at least some park-based PA was not related to either perceived or objective proximity to a park, but was more likely when a match between and

  14. Metal assessment in urban park soils in Sao Paulo 1. Ibirapuera Park

    International Nuclear Information System (INIS)

    Figueiredo, Ana Maria G.; Camargo, Sonia P.; Pavese, Arthur C.; Gumiero, Felipe C.; Enzweiler, Jacinta; Sigolo, Joel B.

    2007-01-01

    In the last years urban soils received increasing attention by scientists, leading to studies focused on their description and investigation all over the world, due to the increasing metal pollution derived from incinerators, industrial waste, atmospheric deposition of dust and aerosols, and other activities. Metal contamination in Sao Paulo public parks is an important environmental question and there is little information on this subject. As part of a project which aims metal assessment in urban park soils from Sao Paulo, in the present paper the concentration of the elements As, Ba, Cr, Pb, Sb and Zn were determined in surface soil samples (0-5 cm) from Ibirapuera park of Sao Paulo. Ibirapuera park is one of the biggest and most visited parks of the city of Sao Paulo, receiving during the weekends more than 400,000 visitors. Instrumental Neutron Activation Analysis (INAA) and X-ray Fluorescence (FRX) were used for metal analysis. Preliminary results showed concentration levels of the analyzed elements higher than the values considered as reference values for soils in Sao Paulo, according to the Environmental Protection Agency of the State of Sao Paulo (CETESB). For As, Ba, Cr and Sb, in some samples the concentrations were even higher than the Prevention values reported by CETESB. The high concentrations of the elements As, Ba, Cr, Pb, Sb and Zn in the Ibirapuera park top soils suggest an anthropogenic source and indicate a potential damage to soil quality. (author)

  15. SURFACE ENGINEERING FOR PARTS MADE BY ADDITIVE MANUFACTURING

    OpenAIRE

    Nutal, Nicolas; Rochus, Pierre; Collette, Jean-Paul; Crahay, Jean; Larnicol, Maiween; Jochem, Helen; Magnien, Julien; Masse, Christian; Rigo, Olivier; Vanhumbeeck, Jean-François; Pambaguian, Laurent

    2015-01-01

    the surface preparation of metal parts made by additive manufacturing (AM). AM is a technology of choice for manufacturing of parts with complex shapes (heat exchangers, RF supports, optical parts…) and integrated functions such as conformal cooling channels, clips, hinges, etc. This opens the door for lightweight parts which are of prime importance for space applications. The potential of the AM technologies is however impeded by the quite rough surface finish that is observed on the as-m...

  16. Review of Shape Deviation Modeling for Additive Manufacturing

    OpenAIRE

    Zhu , Zuowei; Keimasi , Safa; ANWER , Nabil; Mathieu , Luc; Qiao , Lihong

    2016-01-01

    International audience; Additive Manufacturing (AM) is becoming a promising technology capable of building complex customized parts with internal geometries and graded material by stacking up thin individual layers. However, a comprehensive geometric model for Additive Manufacturing is not mature yet. Dimensional and form accuracy and surface finish are still a bottleneck for AM regarding quality control. In this paper, an up-to-date review is drawn on methods and approaches that have been de...

  17. Manufacturing halal in Malaysia

    DEFF Research Database (Denmark)

    Fischer, Johan

    2016-01-01

    In Arabic, halal literally means ‘permissible’ or ‘lawful’. Halal is no longer an expression of an esoteric form of production, trade and consumption, but part of a huge and expanding globalized market in which certification, standards and technoscience play important roles. Over the past three...... production, trade and consumption. Based on fieldwork in Malaysia, this article explores how manufacturing companies understand and practise halal certification, standards and technoscience. I argue that while existing studies of halal overwhelmingly explore micro-social aspects such as the everyday...... consumption among Muslim groups, ‘the bigger institutional picture’ that frames such consumption production and regulation are not well understood. By studying halal production, I provide an ethnography of the overlapping technologies and techniques of production and regulation that together warrant a product...

  18. Developments in fuel manufacturing

    International Nuclear Information System (INIS)

    Ion, S.E.; Harrop, G.; Maricalva Gonzalez, J.

    1995-01-01

    The status of the investment and R and D programmes in the UK and Spanish fuel fabrication facilities is outlined. Due to a number of circumstances, BNFL and ENUSA have been in the forefront of capital investment, with associated commitment to engineering and scientific research and development. Carrying through this investment has allowed the embodiment of proven state of the art technologies in the design of fuel fabrication plants, with particular emphasis on meeting the future challenge of health and safety, and product quality, at an acceptable cost. ENUSA and BNFL currently supply fuel, not only to their respective 'home' markets but also to France, Belgium, Sweden, and Germany. Both organisations employ an International Business outlook and partake in focused and speculative R and D projects for the design and manufacture of nuclear fuel. (orig./HP)

  19. Manufacture of Probiotic Bacteria

    Science.gov (United States)

    Muller, J. A.; Ross, R. P.; Fitzgerald, G. F.; Stanton, C.

    Lactic acid bacteria (LAB) have been used for many years as natural biopreservatives in fermented foods. A small group of LAB are also believed to have beneficial health effects on the host, so called probiotic bacteria. Probiotics have emerged from the niche industry from Asia into European and American markets. Functional foods are one of the fastest growing markets today, with estimated growth to 20 billion dollars worldwide by 2010 (GIA, 2008). The increasing demand for probiotics and the new food markets where probiotics are introduced, challenges the industry to produce high quantities of probiotic cultures in a viable and stable form. Dried concentrated probiotic cultures are the most convenient form for incorporation into functional foods, given the ease of storage, handling and transport, especially for shelf-stable functional products. This chapter will discuss various aspects of the challenges associated with the manufacturing of probiotic cultures.

  20. Maintenance in sustainable manufacturing

    Directory of Open Access Journals (Sweden)

    Vladimir Stuchly

    2014-09-01

    Full Text Available Background: Sustainable development is about reaching a balance between economic, social, and environmental goals, as well as people's participation in the planning process in order to gain their input and support. For a company, sustainable development means adoption of such business strategy and actions that contribute to satisfying present needs of company and stakeholders, as well as simultaneous protection, maintenance and strengthening of human and environmental potential which will be needed in the future. This new approach forces manufacturing companies to change their previous management paradigms. New management paradigm should include new issues and develop innovative methods, practices and technologies striving for solving problem of shortages of resources, softening environment overload and enabling development of environment-friendly lifecycle of products. Hence, its realization requires updating existing production models as they are based on previously accepted paradigm of unlimited resources and unlimited regeneration capabilities. Maintenance plays a crucial role because of its impact on availability, reliability, quality and life cycle cost, thus it should be one of the main pillars of new business running model.  Material and methods: The following paper is a result of research on the literature and observation of practices undertaken by a company within maintenance area. Results and conclusions: The main message is that considering sustainable manufacturing requires considerable expanding range of analysis and focusing on supporting processes. Maintenance offers numerous opportunities of decreasing influence of business processes on natural environment and more efficient resources utilization. The goal of maintenance processes realizing sustainable development strategy is increased profitability of exploitation and optimization of total lifecycle cost without disturbing safety and environmental issues.