WorldWideScience

Sample records for parents bears testimony

  1. Forensic Memories: After Testimony

    DEFF Research Database (Denmark)

    Bøndergaard, Johanne Helbo

    2014-01-01

    of writing that might in fact come “after” testimony. In this paper I attempt to describe a mode of writing in contemporary literature on memory and history, which allows later generations to address historical events to which they did not bear witness, challenging the testimonial mode while bearing its...... strategies and strengths in mind - “after” in both senses of the word. The central argument is that just as the legal concept of testimony was introduced into the cultural sphere to describe a particular genre or mode of writing, the legal concept of forensics will serve as a useful term for describing...

  2. The Weight of a Woman's Testimony

    Directory of Open Access Journals (Sweden)

    Abbas Mohammad Elsiddik

    2015-12-01

    Full Text Available This research attempts to provide a fresh evaluation of a testimony in general and an evaluation of the weight of woman's testimony in particular. By using an empirical methodology, the research responds to the equality issue between women and men as competent witnesses, as Western jurisprudence claims, and the issue of non-equality between women and men as competent witnesses, as Islamic Sharia scholars claim. This study found numerous results, one of which was that womanhood affects a woman's ability to bear in mind a witnessed fact. Therefore, womanhood should be dealt with as a discrediting her testimony factor. Another result was that woman's testimony is admissible, even if she was alone; because womanhood is a factor relating to the weight of a testimony not a stipulation for the admissibility of testimony. Moreover, the research classified testimony in regard to its weight into two kinds. The first kind is Attestation, which always requires corroboration from a man or woman to renders it admissible as evidence. The second kind is Testimony, which does not generally require corroboration, even if the witness is a woman. However, corroboration may be necessary if the testimony has been affected by any discrediting factor regardless the sex of the witness. One more result of the research was that corroboration for testimony is affected by womanhood in certain cases, can be attained by summoning another woman as a witness, inferring factual presumptions, or examining the surrounding circumstances.

  3. Trauma, memory, testimony: phenomenological, psychological, and ethical perspectives

    Directory of Open Access Journals (Sweden)

    Claudia Welz

    2016-01-01

    Full Text Available How can severely traumatized persons re-present the past and its impact on the present if (due to blackout, repression, or dissociation they could not witness what they went through, or can hardly recall it? Drawing on Holocaust testimonies, this article explores the crisis of witnessing constituted by the Shoah and, more generally, problems of integrating and communicating traumatic experiences. Phenomenological, psychological, and ethical perspectives contribute to a systematic investigation of the relation between trauma, memory and testimony. I will argue that preserving personal continuity across the gap between past and present presupposes not only an ‘inner witness’ – which can, according to a long philosophical tradition, be identified with a person’s conscience – but also a social context in which one is addressed and can respond. An attentive listener can bear witness to the witness by accepting the assignation of responsibility implied in testimonial interaction, and thereby support the dialogic restitution of memory and identity.

  4. The Cognitive Management of E-Testimony

    Directory of Open Access Journals (Sweden)

    Saul Traiger

    2008-07-01

    Full Text Available This paper explores the the justificatory status of etestimony, the electronic transmission of testimony through such electronic media as e-mail, the web, instant messaging, and file-sharing. I argue that e-testimony introduces complexities in justification and cognitive management generally which should be of special interest to epistemologists and cognitive scientists. In contrast to ordinary non-technology mediated testimony, e-testimony is an impoverished stimulus. Users have to assess the epistemic and non-epistemic risks of accessing e-testimony with very little supporting information. This raises the cognitive overhead of such judgments. The paper explores mechanisms for reducing this cognitive overhead and more effectively managing e-testimony, including automated filtering and automated censorship of the incoming e-testimony stream. It is argued that such solutions may not reduce cognitive load, since epistemic responsibility still resides with the individual recipient of e-testimony.

  5. Testimonial a influencer marketing

    OpenAIRE

    Kúdelková, Andrea

    2017-01-01

    The topic of the diploma thesis is testimonial and influencer marketing. The aim of this work is to find out whether influencer increases the likelihood of purchasing a healthy nutritional product for Slovak women aged 20-40 years, and also whether Peter Sagana as a testimonial enhances brand credibility. The theoretical part deals with general communication and presentation of testimonial and marketing influence, their categories and examples. The practical part of the thesis is set into the...

  6. PUBLIK FIGUR DALAM IKLAN TESTIMONIAL

    Directory of Open Access Journals (Sweden)

    Deddi Duto Hartanto

    2000-01-01

    Full Text Available Testimonial advertising seemingly identical with famous figure such as artist%2C sportmen or others. They are all branded as "public figure" because they are well known by public. A lot of advertising creators using public figure in order to gain a high brand awareness. Is the use of public figure in testimonial advertising more profitable? Is their able quite representative for the products they represent ? Abstract in Bahasa Indonesia : Iklan testimonial identik dengan tokoh terkenal%2C baik itu artis%2C tokoh masyarakat%2C olahragawan%2C atau yang lainnya. Semuanya di cap sebagai "publik figur%2C" karena sudah dikenal masyarakat.Banyak kreator iklan menggunakan publik figur dengan harapan dapat mencapai brand awareness yang tinggi. Apakah penggunaan publik figur dalam iklan testimonial lebih menguntungkan ?%2C Apakah peran publik figur (sudah mewakili produk yang dibawakan?. testimonial advertising%2C public figure

  7. 48 CFR 1252.242-71 - Contractor testimony.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Contractor testimony. 1252... Contractor testimony. As prescribed in (TAR) 48 CFR 1242.7000(b), insert the following clause: Contractor Testimony (OCT 1994) All requests for the testimony of the Contractor or its employees, and any intention to...

  8. A Step Forward in the Conceptualization and Measurement of Parental Burnout: The Parental Burnout Assessment (PBA).

    Science.gov (United States)

    Roskam, Isabelle; Brianda, Maria-Elena; Mikolajczak, Moïra

    2018-01-01

    So far, the conceptualization and measurement of parental burnout have been deduced from those of job burnout. As a result, it is unclear whether current measures of parental burnout constitute the best representation of the parental burnout construct/syndrome: the possibility cannot be excluded that some dimensions ought to be added, which would change the structure and definition of parental burnout. In this study, the conceptualization and measurement of parental burnout were approached using an inductive method, in which the parental burnout phenomenon was (re)constructed based solely on the testimonies of burned-out parents. Items extracted from their testimonies were presented to a sample of French-speaking and English-speaking parents ( N = 901) and submitted to factor analyses. An identifiable parental burnout syndrome including four dimensions was found (exhaustion in one's parental role, contrast with previous parental self, feelings of being fed up with one's parental role and emotional distancing from one's children). The resulting instrument, the Parental Burnout Assessment (PBA) presents good validity. Factorial invariance across gender and languages was also found. Finally, the results of this study replicate previous findings that psychological traits of the parents, parenting factors, and family functioning account for more variance in parental burnout than sociodemographic factors.

  9. Epistemic merit, autonomy, and testimony

    Directory of Open Access Journals (Sweden)

    Jesús VEGA ENCABO

    2008-01-01

    Full Text Available In this paper, it is argued that both the informer and the hearer in a testimonial situation deserve epistemic merit insofar as they contribute to the collaborative achievement of sharing knowledge. The paper introduces a distinction between the ideals of self-sufficiency and epistemic autonomy. The autonomous exercise of our epistemic agency is very often carried out under strong conditions of epistemic dependence. Testimony exhibits a kind of social dependence that does not threaten the autonomy of the subjects that need to consider their own epistemic capacities. When involved in a testimonial situation, both speaker and hearer declare, at least implicitly, the standings they occupy in an epistemic space and are obliged to recognise certain epistemic requirements.

  10. Potential reduced exposure products (PREPs) in industry trial testimony.

    Science.gov (United States)

    Wayne, Geoffrey Ferris

    2006-12-01

    To identify patterns in trial testimony that may reflect on the intentions or expectations of tobacco manufacturers with regard to the introduction of potential reduced exposure products (PREPs). Research was conducted using the Deposition and Trial Testimony Archive (DATTA) collection of trial testimony and depositions housed online at Tobacco Documents Online (www.tobaccodocuments.org). Relevant testimony was identified through full-text searches of terms indicating PREPs or harm reduction strategies. The role and function of PREPs in testimony were classified according to common and contrasting themes. These were analysed in the context of broader trial arguments and against changes in time period and the market. Analysis of testimony suggests that the failure of PREPs in the market tempered initial industry enthusiasm and made protection of the conventional cigarette market its major priority. The "breakthrough" character of PREPs has been de-emphasised, with trial arguments instead positioning PREPs as simply another choice for consumers. This framework legitimises the sale of conventional brands, and shifts the responsibility for adoption of safer products from the manufacturer to the consumer. Likewise, testimony has abandoned earlier dramatic health claims made with regard to PREPs, which had undermined industry arguments regarding efforts to reduce harm in conventional products. More recent testimony advocates the broad acceptance of independent guidelines that would validate use of health claims and enable the industry to market PREPs to consumers. Trial testimony reflects the changing role and positioning of PREPs by the tobacco industry. The findings are of particular importance with regard to future evaluation and potential regulation of reduced harm products.

  11. False confessions, expert testimony, and admissibility.

    Science.gov (United States)

    Watson, Clarence; Weiss, Kenneth J; Pouncey, Claire

    2010-01-01

    The confession of a criminal defendant serves as a prosecutor's most compelling piece of evidence during trial. Courts must preserve a defendant's constitutional right to a fair trial while upholding the judicial interests of presenting competent and reliable evidence to the jury. When a defendant seeks to challenge the validity of that confession through expert testimony, the prosecution often contests the admissibility of the expert's opinion. Depending on the content and methodology of the expert's opinion, testimony addressing the phenomenon of false confessions may or may not be admissible. This article outlines the scientific and epistemological bases of expert testimony on false confession, notes the obstacles facing its admissibility, and provides guidance to the expert in formulating opinions that will reach the judge or jury. We review the 2006 New Jersey Superior Court decision in State of New Jersey v. George King to illustrate what is involved in the admissibility of false-confession testimony and use the case as a starting point in developing a best-practice approach to working in this area.

  12. Robust Trust in Expert Testimony

    Directory of Open Access Journals (Sweden)

    Christian Dahlman

    2015-05-01

    Full Text Available The standard of proof in criminal trials should require that the evidence presented by the prosecution is robust. This requirement of robustness says that it must be unlikely that additional information would change the probability that the defendant is guilty. Robustness is difficult for a judge to estimate, as it requires the judge to assess the possible effect of information that the he or she does not have. This article is concerned with expert witnesses and proposes a method for reviewing the robustness of expert testimony. According to the proposed method, the robustness of expert testimony is estimated with regard to competence, motivation, external strength, internal strength and relevance. The danger of trusting non-robust expert testimony is illustrated with an analysis of the Thomas Quick Case, a Swedish legal scandal where a patient at a mental institution was wrongfully convicted for eight murders.

  13. 29 CFR 18.701 - Opinion testimony by lay witnesses.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 1 2010-07-01 2010-07-01 true Opinion testimony by lay witnesses. 18.701 Section 18.701 Labor Office of the Secretary of Labor RULES OF PRACTICE AND PROCEDURE FOR ADMINISTRATIVE HEARINGS... Opinion testimony by lay witnesses. If the witness is not testifying as an expert, the witness' testimony...

  14. Functional magnetic resonance imaging (FMRI) and expert testimony.

    Science.gov (United States)

    Kulich, Ronald; Maciewicz, Raymond; Scrivani, Steven J

    2009-03-01

    Medical experts frequently use imaging studies to illustrate points in their court testimony. This article reviews how these studies impact the credibility of expert testimony with judges and juries. The apparent "objective" evidence provided by such imaging studies can lend strong credence to a judge's or jury's appraisal of medical expert's testimony. However, as the court usually has no specialized scientific expertise, the use of complex images as part of courtroom testimony also has the potential to mislead or at least inappropriately bias the weight given to expert evidence. Recent advances in brain imaging may profoundly impact forensic expert testimony. Functional magnetic resonance imaging and other physiologic imaging techniques currently allow visualization of the activation pattern of brain regions associated with a wide variety of cognitive and behavioral tasks, and more recently, pain. While functional imaging technology has a valuable role in brain research and clinical investigation, it is important to emphasize that the use of imaging studies in forensic matters requires a careful scientific foundation and a rigorous legal assessment.

  15. Natural Conversations as a Source of False Memories in Children: Implications for the Testimony of Young Witnesses

    Science.gov (United States)

    Principe, Gabrielle F.; Schindewolf, Erica

    2012-01-01

    Research on factors that can affect the accuracy of children’s autobiographical remembering has important implications for understanding the abilities of young witnesses to provide legal testimony. In this article, we review our own recent research on one factor that has much potential to induce errors in children’s event recall, namely natural memory sharing conversations with peers and parents. Our studies provide compelling evidence that not only can the content of conversations about the past intrude into later memory but that such exchanges can prompt the generation of entirely false narratives that are more detailed than true accounts of experienced events. Further, our work show that deeper and more creative participation in memory sharing dialogues can boost the damaging effects of conversationally conveyed misinformation. Implications of this collection of findings for children’s testimony are discussed. PMID:23129880

  16. 37 CFR 104.22 - Demand for testimony or production of documents.

    Science.gov (United States)

    2010-07-01

    ... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Demand for testimony or... Documents in Legal Proceedings § 104.22 Demand for testimony or production of documents. (a) Whenever a demand for testimony or for the production of documents is made upon an employee, the employee shall...

  17. Expert testimony influences juror decisions in criminal trials involving recovered memories of childhood sexual abuse.

    Science.gov (United States)

    Khurshid, Ayesha; Jacquin, Kristine M

    2013-01-01

    We examined the impact of expert witness orientation (researcher or clinical practitioner) and type of testimony (testimony for the prosecution, defense, both prosecution and defense, or no testimony) on mock jurors' decisions in a sexual abuse trial. Participants acted as mock jurors on a sexual abuse criminal trial based on recovered memory that included expert witness testimony. Results showed that expert witness testimony provided by a researcher did not impact mock jurors' guilt ratings any differently than the expert witness testimony provided by a clinical practitioner. However, type of testimony had a significant effect on jurors' guilt ratings such that jurors who read only defense or only prosecution testimony made decisions favoring the relevant side.

  18. The Truth and Reconciliation Commission and gender: The Testimony of Mrs Konile revisited

    Directory of Open Access Journals (Sweden)

    Sandiswa L. Kobe

    2017-12-01

    Full Text Available This article draws on a well-known narration of the Gugulethu Seven incident from the Truth and Reconciliation Commission (TRC proceedings with specific reference to testimonies of the mothers of the Gugulethu Seven. The article focuses on Mrs Konile’s testimony as a case study: Testimony of a black woman whose son was murdered by the apartheid government’s security forces. During the TRC hearings, Mrs Konile ‘failed’ to effectively narrate her story, which resulted in her testimony being dismissed as being incoherent. This article examines the underlying attributes of Mrs Konile’s testimony and revisits why she was considered ‘incapable’ of articulating her experience in a convincing manner. The analysis aims to acknowledge, identify and give insights about this woman’s testimony from an African women theologian viewpoint (specifically with references to the Isixhosa religious cultural background.

  19. 29 CFR 1977.11 - Testimony.

    Science.gov (United States)

    2010-07-01

    ... Relating to Labor (Continued) OCCUPATIONAL SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR (CONTINUED) DISCRIMINATION AGAINST EMPLOYEES EXERCISING RIGHTS UNDER THE WILLIAMS-STEIGER OCCUPATIONAL SAFETY AND HEALTH ACT... Act is also prohibited by section 11(c). This protection would of course not be limited to testimony...

  20. 6 CFR 5.45 - Procedure when testimony or production of documents is sought; general.

    Science.gov (United States)

    2010-01-01

    ... 6 Domestic Security 1 2010-01-01 2010-01-01 false Procedure when testimony or production of... Procedure when testimony or production of documents is sought; general. (a) If official information is... requiring oral testimony, and identification of potentially relevant documents. (c) The appropriate...

  1. 29 CFR 18.703 - Bases of opinion testimony by experts.

    Science.gov (United States)

    2010-07-01

    ... Bases of opinion testimony by experts. The facts or data in the particular case upon which an expert... 29 Labor 1 2010-07-01 2010-07-01 true Bases of opinion testimony by experts. 18.703 Section 18.703 Labor Office of the Secretary of Labor RULES OF PRACTICE AND PROCEDURE FOR ADMINISTRATIVE HEARINGS...

  2. The shifting landscape of latent print testimony: an american perspective

    Directory of Open Access Journals (Sweden)

    Heidi Eldridge

    2017-01-01

    Full Text Available Friction ridge comparison testimony in the United States has long been characterized by speaking in absolutes: fingerprints are unique, the Analysis, Comparison, Evaluation, and Verification methodology has a zero-error rate, and the testimony presented by the expert should be regarded as an incontrovertible fact. Once the National Research Council released their watershed report in 2009, questioning and criticizing these clear overstatements of the strength of the evidence, many commentators and professional organizations recommended that the friction ridge community rethink the way their evidence was presented in reports and in court. Yet, change has been slow to come. While some agencies have begun a shift in the way they present their findings, many others still testify the same way they always have. This paper presents the historical context of where American friction ridge testimony has been, lays out the arguments for why it needs to change, describes some recent efforts to improve, and highlights some likely directions for the future of friction ridge reporting and testimony in the United States.

  3. 7 CFR 900.40 - Written testimony and USDA data request requirements.

    Science.gov (United States)

    2010-01-01

    ... and Nut Marketing Agreements and Marketing Orders § 900.40 Written testimony and USDA data request... 7 Agriculture 8 2010-01-01 2010-01-01 false Written testimony and USDA data request requirements...) AGRICULTURAL MARKETING SERVICE (Marketing Agreements and Orders; Fruits, Vegetables, Nuts), DEPARTMENT OF...

  4. Delayed child-bearing.

    Science.gov (United States)

    Johnson, Jo-Ann; Tough, Suzanne

    2012-01-01

    To provide an overview of delayed child-bearing and to describe the implications for women and health care providers. Delayed child-bearing, which has increased greatly in recent decades, is associated with an increased risk of infertility, pregnancy complications, and adverse pregnancy outcome. This guideline provides information that will optimize the counselling and care of Canadian women with respect to their reproductive choices. Maternal age is the most important determinant of fertility, and obstetric and perinatal risks increase with maternal age. Many women are unaware of the success rates or limitations of assisted reproductive technology and of the increased medical risks of delayed child-bearing, including multiple births, preterm delivery, stillbirth, and Caesarean section. This guideline provides a framework to address these issues. Studies published between 2000 and August 2010 were retrieved through searches of PubMed and the Cochrane Library using appropriate key words (delayed child-bearing, deferred pregnancy, maternal age, assisted reproductive technology, infertility, and multiple births) and MeSH terms (maternal age, reproductive behaviour, fertility). The Internet was also searched using similar key words, and national and international medical specialty societies were searched for clinical practice guidelines and position statements. Data were extracted based on the aims, sample, authors, year, and results. The quality of evidence was rated using the criteria described in the Report of the Canadian Task Force on Preventive Health Care (Table 1). The Society of Obstetricians and Gynaecologists of Canada. RECOMMENDATIONS 1. Women who delay child-bearing are at increased risk of infertility. Prospective parents, especially women, should know that their fecundity and fertility begin to decline significantly after 32 years of age. Prospective parents should know that assisted reproductive technologies cannot guarantee a live birth or completely

  5. The impact of Daubert on the admissibility of forensic anthropology expert testimony.

    Science.gov (United States)

    Lesciotto, Kate M

    2015-05-01

    Forensic anthropologists anticipated a significant impact from the 1993 Supreme Court Daubert decision, which addressed the standard of admissibility for expert testimony. In response, many forensic articles cited Daubert in the search for objective techniques or a critique of established subjective methods. This study examines challenges to forensic anthropological expert testimony to evaluate whether Daubert has actually affected the admissibility of such testimony. Thirty cases were identified that addressed the admissibility of the testimony, including 14 cases prior to Daubert and 16 after Daubert. Examination of these cases indicates that post-Daubert cases do not result in more exclusions. Yet, this lack of exclusions may instead be viewed as a manifestation of the field's overall surge toward more objective and quantifiable techniques in a self-regulating response to Daubert. © 2015 American Academy of Forensic Sciences.

  6. Recombinant lines for less-spininess in steroid-bearing Solanum viarum using induced mutants as parents

    International Nuclear Information System (INIS)

    Krishnan, R.; Nanda Kumar, D.; Subhas Chander, M.

    1988-01-01

    In the domestication of the wild, spinous and steroid-bearing Solanum viarum (syn. S. khasianum var. chatterjeeanum) induced mutations play a major role. The development of Glaxo and BARC mutants catalysed commercial cultivation of this species for its berries containing solasodine, used in steroid industries. The commercially more popular Glaxo mutant population consists predominantly of plants that are totally free of spines in aerial parts except lamina where few straight spines develop. The BARC mutant still possesses spines on aerial parts including the persistent calyx. However, the laminary spines of the BARC mutant are curved and vestigial. Comparative studies on morphology, growth behaviour and agronomic characters of the two mutants, their wild progenitor and their hybrid progenies showed that the three types differ only for spine character. In F 2 generation of a cross involving the Glaxo and BARC mutants, a double mutant recombinant was recovered. The recombinant is devoid of spines in aerial parts like its Glaxo mutant parent, but possesses laminary curved vestigial spines like the BARC parent. The spine characters of the recombinant are inherited double recessive. Three advanced lines of this recombinant type (IIHR 2n - 1,2 and 3) were tested in replicated trials 1985 and 1986. They showed parity in berry yield and solasodine content with the Glaxo mutant and three promising lines evolved elsewhere viz. 'RRL (Bhuhaneswar) Y-14', 'RRL (Jorhat)' and 'Pusa'. The results indicate gainful use of induced mutants in hybridization leading to development of superior less-spiny lines of steroid bearing Solanum viarum

  7. 6 CFR 5.44 - Testimony and production of documents prohibited unless approved by appropriate Department...

    Science.gov (United States)

    2010-01-01

    ... 6 Domestic Security 1 2010-01-01 2010-01-01 false Testimony and production of documents prohibited... in Litigation § 5.44 Testimony and production of documents prohibited unless approved by appropriate... or request, including in connection with any litigation, provide oral or written testimony by...

  8. 49 CFR 835.10 - Testimony in Federal, State, or local criminal investigations and other proceedings.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 7 2010-10-01 2010-10-01 false Testimony in Federal, State, or local criminal investigations and other proceedings. 835.10 Section 835.10 Transportation Other Regulations Relating to Transportation (Continued) NATIONAL TRANSPORTATION SAFETY BOARD TESTIMONY OF BOARD EMPLOYEES § 835.10 Testimony in Federal, State, or local crimina...

  9. [The Testimony. Contributions to the Construction of Historical Memory].

    Science.gov (United States)

    Roldán, Ismael

    2013-06-01

    Testimony is a complex act that contributes significantly to the elaboration of mourning, both individually and on a collective level. This is the central idea that is discussed in the text, using as a basis, the results of research conducted as a pilot intervention in the year 2010 for Visible Victims Foundation, and was then replicated in four other regions. In 1998 the National Liberation Army attacked the pipeline OCENSA causing severe damage to the people of Machuca (Segovia, Antioquia). In 2010 the psychologist Ligia Rascovsky implemented an intervention strategy to support the construction of individual and collective memory among survivors of the attack, who, in addition to serious injuries, suffered physical and psychosocial after effects such as post-traumatic stress disorder (PTSD). The results of this work are used to understand the relevance of the testimony in the psychosocial recovery processes, which is a major challenge for Colombian society today. The type of study was psychosocial intervention in 43 adults of both sexes, Machuca residents who were affected by the bombing, and agreed to voluntarily participate in designed workshops. The workshops followed experiential type techniques (psychodrama, psycho-fantasies, etc.), in which the purpose was to identify the damage by developing testimonial memory of what happened. The workshops express the emotions of grief, recognize the injustice of suffering, fight memory defense that justifies violence and raising awareness of human rights. It also facilitated the process of dignity, empowerment and security in personal and collective reconstruction. In expressing their memoirs thus, they could be free from fear and gain more confidence in themselves as individuals and as a social group, as seen in the formation of individual leadership. These results are the basis of the discussion presented. In this context it has been found that the testimonial narrative is an instrument of personal and social healing

  10. 40 CFR 1611.9 - Testimony in Federal, State, or local criminal investigations and other proceedings.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Testimony in Federal, State, or local criminal investigations and other proceedings. 1611.9 Section 1611.9 Protection of Environment CHEMICAL SAFETY AND HAZARD INVESTIGATION BOARD TESTIMONY BY EMPLOYEES IN LEGAL PROCEEDINGS § 1611.9 Testimony in Federal, State, or local criminal...

  11. The Tobacco Deposition and Trial Testimony Archive (DATTA) project: origins, aims, and methods.

    Science.gov (United States)

    Davis, Ronald M; Douglas, Clifford E; Beasley, John K

    2006-12-01

    Research on previously secret tobacco industry documents has grown substantially during the past decade, since these documents first became available as the result of private and governmental litigation and investigations by the US Congress and the US Food and Drug Administration. Complementary research on tobacco litigation testimony is now being conducted through the Tobacco Deposition and Trial Testimony Archive (DATTA) project. We obtained transcripts of depositions and trial testimony, deposition and trial exhibits, expert reports, and other litigation documents from law firms, court reporter firms, individual lawyers and witnesses, tobacco company websites, and other sources. As of 3 March 2006, the publicly available collection of DATTA (http://tobaccodocuments.org/datta) contained 4850 transcripts of depositions and trial testimony, including a total of about 820,000 transcript pages. Transcripts covered testimony from 1957 to 2005 (85% were for testimony from 1990 to 2005) given by more than 1500 witnesses in a total of 232 lawsuits. Twelve research teams were established to study the transcripts, with each team covering a particular topic (for example, the health consequences of tobacco use, addiction and pharmacology, tobacco advertising and promotion, tobacco-product design and manufacture, economic impact of tobacco use, youth initiation of tobacco use, and public understanding of the risks of tobacco use and exposure to second-hand smoke). The teams used qualitative research methods to analyse the documents, and their initial findings are published throughout this journal supplement.

  12. Social media patient testimonials in implant dentistry: information or misinformation?

    Science.gov (United States)

    Ho, Adrian; McGrath, Colman; Mattheos, Nikos

    2017-07-01

    This study aims to assess the educational value of YouTube patient testimonial videos in implant dentistry and qualitatively analyse the themes mentioned. Videos were sampled consecutively on YouTube, using the keywords "dental implant patients' testimonials experience," sorted "by relevance." Patient testimonials on dental implant treatment were examined. Inaudible or non-English videos were excluded. Four calibrated investigators scored the videos for educational content, using a matrix derived from the European Association for Osseointegration information booklet, and demographic details were recorded. Data were analysed qualitatively through inductive thematic analysis. A total of 202 videos were analysed (48 exclusions). Inter-examiner reliability was fair to moderate for informative statements and poor to substantial for misleading statements. A mean of 1.8 informative statements were made per video, compared with misleading, 0.5. Many topics were rarely mentioned, with 19/30 themes appearing fewer than 5% of videos. Patients often informed that implants could improve aesthetics and function, but were misleading on aspects of pain control. Some statements may heighten expectations or imply permanency of treatment. Balanced presentation in YouTube testimonials may be limited by bias of clinician-uploaded content. Greater magnitude and breadth of information would improve educational value. Many important parameters of implant therapy were overlooked, whilst information was often potentially misleading. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  13. The presentation of expert testimony via live audio-visual communication.

    Science.gov (United States)

    Miller, R D

    1991-01-01

    As part of a national effort to improve efficiency in court procedures, the American Bar Association has recommended, on the basis of a number of pilot studies, increased use of current audio-visual technology, such as telephone and live video communication, to eliminate delays caused by unavailability of participants in both civil and criminal procedures. Although these recommendations were made to facilitate court proceedings, and for the convenience of attorneys and judges, they also have the potential to save significant time for clinical expert witnesses as well. The author reviews the studies of telephone testimony that were done by the American Bar Association and other legal research groups, as well as the experience in one state forensic evaluation and treatment center. He also reviewed the case law on the issue of remote testimony. He then presents data from a national survey of state attorneys general concerning the admissibility of testimony via audio-visual means, including video depositions. Finally, he concludes that the option to testify by telephone provides a significant savings in precious clinical time for forensic clinicians in public facilities, and urges that such clinicians work actively to convince courts and/or legislatures in states that do not permit such testimony (currently the majority), to consider accepting it, to improve the effective use of scarce clinical resources in public facilities.

  14. The effects of rational and experiential information processing of expert testimony in death penalty cases.

    Science.gov (United States)

    Krauss, Daniel A; Lieberman, Joel D; Olson, Jodi

    2004-01-01

    Past research examining the effects of actuarial and clinical expert testimony on defendants' dangerousness in Texas death penalty sentencing has found that jurors are more influenced by less scientific pure clinical expert testimony and less influenced by more scientific actuarial expert testimony (Krauss & Lee, 2003; Krauss & Sales, 2001). By applying cognitive-experiential self-theory (CEST) to juror decision-making, the present study was undertaken in an attempt to offer a theoretical rationale for these findings. Based on past CEST research, 163 mock jurors were either directed into a rational mode or experiential mode of processing. Consistent with CEST and inconsistent with previous research using the same stimulus materials, results demonstrate that jurors in a rational mode of processing more heavily weighted actuarial expert testimony in their dangerousness assessments, while those jurors in the experiential condition were more influenced by clinical expert testimony. The policy implications of these findings are discussed. Copyright 2004 John Wiley & Sons, Ltd.

  15. Suicide voices: testimonies of trauma in the French workplace.

    Science.gov (United States)

    Waters, Sarah

    2017-03-01

    Workplace suicide has become an urgent social concern internationally with rising numbers of employees choosing to kill themselves in the face of extreme pressures at work. Yet, research on this phenomenon is hampered by fragmentary statistical data and the sheer contentiousness of this issue. This paper presents the preliminary findings of a research project on workplace suicides in France, where there has been a 'suicide epidemic' across a wide range of companies. I draw on an analysis of suicide letters linked to 23 suicide cases across three French companies during the period 2005-2015. My methodological approach is informed by the work of suicide sociologist, Jack D Douglas, who emphasised the importance of narrative, testimony and voice to our understanding of the causes of suicide. Douglas argued that an analysis of the 'social meanings' of suicide should start with a consideration of the motivations attributed to self-killing by suicidal individuals themselves and those close to them. Why does work or conditions of work push some individuals to take their own lives? What can the 'suicide voices' articulated in recent testimonies tell us about the causes of workplace suicide? In this paper, I treat suicide letters as a unique mode of testimony that can reveal some of the profound effects of workplace transformations on subjective, intimate and lived experiences of work. By examining French suicide testimonies, my aim is to deepen our understanding of the nature and causes of suicide in today's globalised workplaces. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/.

  16. Influences of credibility of testimony and strength of statistical evidence on children's and adolescents' reasoning.

    Science.gov (United States)

    Kail, Robert V

    2013-11-01

    According to dual-process models that include analytic and heuristic modes of processing, analytic processing is often expected to become more common with development. Consistent with this view, on reasoning problems, adolescents are more likely than children to select alternatives that are backed by statistical evidence. It is shown here that this pattern depends on the quality of the statistical evidence and the quality of the testimonial that is the typical alternative to statistical evidence. In Experiment 1, 9- and 13-year-olds (N=64) were presented with scenarios in which solid statistical evidence was contrasted with casual or expert testimonial evidence. When testimony was casual, children relied on it but adolescents did not; when testimony was expert, both children and adolescents relied on it. In Experiment 2, 9- and 13-year-olds (N=83) were presented with scenarios in which casual testimonial evidence was contrasted with weak or strong statistical evidence. When statistical evidence was weak, children and adolescents relied on both testimonial and statistical evidence; when statistical evidence was strong, most children and adolescents relied on it. Results are discussed in terms of their implications for dual-process accounts of cognitive development. Copyright © 2013 Elsevier Inc. All rights reserved.

  17. 37 CFR 205.23 - Scope of testimony.

    Science.gov (United States)

    2010-07-01

    ..., reasons, mental processes, analyses, or conclusions of that employee in the performance of his or her..., mental processes, analyses, or conclusions of that Office employee in performing the function. (4) In... AND PROCEDURES LEGAL PROCESSES Testimony By Employees and Production of Documents in Legal Proceedings...

  18. Using Testimonial Response to Frame the Challenges and Possibilities of Risky Historical Texts

    Science.gov (United States)

    Damico, James; Apol, Laura

    2008-01-01

    Literature that vividly and explicitly describes (often in the form of testimonies from one or more characters) traumatic and/or catastrophic events of human history poses particular challenges for readers. This article proposes testimonial response as one approach to responding to these "risky historical texts." By way of introducing "testimonial…

  19. 78 FR 9336 - Production of FHFA Records, Information, and Employee Testimony in Legal Proceedings

    Science.gov (United States)

    2013-02-08

    ... timely notice and centralized, objective decision making. The United States Supreme Court upheld this..., Information, and Employee Testimony in Legal Proceedings AGENCY: Federal Housing Finance Agency. ACTION... (FHFA) proposes a regulation governing the production of FHFA records, information or employee testimony...

  20. Influences of credibility of testimony and strength of statistical evidence on children’s and adolescents’ reasoning

    Science.gov (United States)

    Kail, Robert V.

    2013-01-01

    According to dual-process models that include analytic and heuristic modes of processing, analytic processing is often expected to become more common with development. Consistent with this view, on reasoning problems, adolescents are more likely than children to select alternatives that are backed by statistical evidence. It is shown here that this pattern depends on the quality of the statistical evidence and the quality of the testimonial that is the typical alternative to statistical evidence. In Experiment 1, 9- and 13-year-olds (N = 64) were presented with scenarios in which solid statistical evidence was contrasted with casual or expert testimonial evidence. When testimony was casual, children relied on it but adolescents did not; when testimony was expert, both children and adolescents relied on it. In Experiment 2, 9- and 13-year-olds (N = 83) were presented with scenarios in which casual testimonial evidence was contrasted with weak or strong statistical evidence. When statistical evidence was weak, children and adolescents relied on both testimonial and statistical evidence; when statistical evidence was strong, most children and adolescents relied on it. Results are discussed in terms of their implications for dual-process accounts of cognitive development. PMID:23735681

  1. Ethical Issues in Expert Opinions and Testimony.

    Science.gov (United States)

    Weed, Roger O.

    2000-01-01

    This article provides an overview of ethical issues in private for-profit practice, with particular focus on expert testimony, using examples from a sample of claims filed with the National Association of Rehabilitation Professionals in the Private Sector and malpractice insurance companies. Complaints most frequently involve issues related to…

  2. Service to the South African society through prophetic testimony as a liturgical act

    Directory of Open Access Journals (Sweden)

    Ben J. de Klerk

    2013-01-01

    Full Text Available It is suggested that a clear prophetic voice of the congregational gathering could change the society to which the congregants belong. The problem is that this prophetic voice seems to have disappeared in many cases. A solution might be found if the point of view is taken that the prophetic voice in the congregational gathering is heard in the liturgical acts or rites. In the science of Liturgy attention must be given to the revitalisation of the gift of prophesy. In this article the prophetic testimony of the Old Testament prophets and of the Prophet, Jesus Christ, were used as sources. Following in the footsteps of Brueggemann, an effort will be made to establish in relevant scripture passages what the attitude and practise of prophetic testimony should be. The possibility of rendering service through prophetic testimony as a liturgical act in the South African society is wide open. Prophetic testimony serves to criticise the dominant perception in order to dismantle it, but is also serves to energise persons and communities by its promise of another time and situation towards which the community of faith could move.

  3. Does company compliance with RS-17 influence the characterization of a casual nexus in expert testimony?

    Directory of Open Access Journals (Sweden)

    Manuela Ribeiro

    2015-02-01

    Full Text Available Objective: To examine whether company compliance with RS-17 influences the characterization of the casual nexus in physical therapists' expert reports of cumulative trauma disorders in the labor court of Pernambuco, Brazil. Method: The sample was composed of seven physical therapists who provided expert testimony regarding cumulative trauma disorder cases in the labor court of Pernambuco, Brazil. Data collection was performed across two stages. In the first stage, the experts answered a sociodemographic survey and requested the identification numbers of recent cases where expert testimony was provided to characterize the causal nexus. In the second stage, the researchers went to the labor court to collect expert testimony data. These experts indicated that of 75 total cases, 31% (N=23 of the companies fulfilled RS-17, whereas 69% (N=52 did not comply with the law. Results: Among the organizations that complied with legislation, 30% of the analyzed expert testimonies showed a positive causal nexus. However, of the companies that did not comply with RS-17, 71% of the expert testimonies revealed a causal nexus. These results indicate that the breach of the law increases the probability that a causal nexus will be determined by 54.8%. Conclusion: The results showed that failure to comply with RS-17 significantly increases the probability that a causal nexus will be determined in physical therapists' expert testimony of cumulative trauma disorders.

  4. Theatre of testimony : an investigation in devising asylum

    NARCIS (Netherlands)

    Maedza, P.

    2013-01-01

    The use of testimonies in performance is enjoying increased artistic and critical popularity on contemporary world stages and has a long and rich tradition on South African stages. Both internationally and locally, emerging and established playwrights working on migration and refugee issues are

  5. Testimony and Narrative as a Political Relation: The Question of Ethical Judgment in Education

    Science.gov (United States)

    Adami, Rebecca; Hållander, Marie

    2015-01-01

    In this article, we explore the role of film in educational settings and argue that testimony and narrative are dependent upon each other for developing ethical judgments. We use the film "12 Angry Men" to enhance our thesis that the emotional response that sometimes is intended in using film as testimonies in classrooms requires a…

  6. Psychological aspects of old men testimony

    Directory of Open Access Journals (Sweden)

    Brkić Snežana

    2012-01-01

    Full Text Available Aging does not exclude some person s potential witness, but it is factor which can exert influence on tactics of examination of witness. it also influences the evaluation of testimony. Therefore, it is important to know the specific psychological functions of old men, which are in relation with testimony. The most important psychological functions are perception and memory. There are some negative subjective factors by aging as: weakening of sensul sensitivity, weakening of memory, reducing of intelligence, decelerating of psychomotor functions and negative influence of emotional and motivating process on perception. However, we must know that there are some individual differences between old people. Therefore, we should not deny the aged as a witness. The judge must always check the sensual sensitivity of witness, by putting the questions, by court's experiment or by psychological expert opinion. We must also take into consideration the specific features of the aged, when we interrogate them as a witness. In this sense, we can give some recommendations in regard to place, time and manner of their interrogation. That treatment has to enable the accurate and complete statement, from one side, and it also has to disable the harmful effect of criminal procedure to witness, psyche, from the other side.

  7. The Growing Admissibility of Expert Testimony by Clinical Social Workers on Competence to Stand Trial

    Science.gov (United States)

    Siegel, David M.

    2008-01-01

    Expert testimony by clinical social workers concerning a criminal defendant's competence to stand trial has increasingly been admitted in certain state courts over the past two decades, yet most state laws still require that court-appointed competence evaluators be psychiatrists or psychologists. Pressure to admit social workers' testimony will…

  8. Testimony, Documentary, Fiction

    DEFF Research Database (Denmark)

    Hansen, Hans Lauge

    2017-01-01

    to the memory of the Civil War and Francoist repression: the detective plot, the divided plotline between present and past, and metafictional reflections. But what role did it actually play in the development of the case of the stolen children? This paper studies the relation between different social discourses...... (testimony, fiction, investigative journalism, historiography) and different media (printed books, TV, cinema and theatre) in the development of the case, and explores the specific relation between documentary and fiction in this context. The article follows a line of dialogic interaction between social......This paper examines the remedialisation of the abduction of the children of “rojas” by the Francoist regime. In 2006 the Spanish author Benjamin Prado published Mala gente que camina, a novel that shares most of the characteristics of the fiction published after the turn of the millennium dedicated...

  9. Single-Parent Families in Rural Communities

    Science.gov (United States)

    Lewis, Ken

    1978-01-01

    Presenting national statistics on single-parent families, this article illustrates the need for serious study of this phenomenon, suggesting that changing divorce laws, increased single-parent adoptions, and an increase in the number of supportive services for single-parent families are contingencies having significant bearing upon the…

  10. From Empathy to Critical Reflection: The Use of Testimonies in The Training of Holocaust Educators

    Science.gov (United States)

    Bornstein, Lilach Naishtat; Naveh, Eyal

    2018-01-01

    How can we bridge the emotional and cognitive study of Holocaust testimonies in Israel? Can empathy be used as a stepping stone to critical reflection? And how can teachers address the manipulative popular interpretation of these testimonies in Israel, which seemingly place them beyond critical reflection? We examine these questions through an…

  11. Children's Causal Inferences from Conflicting Testimony and Observations

    Science.gov (United States)

    Bridgers, Sophie; Buchsbaum, Daphna; Seiver, Elizabeth; Griffiths, Thomas L.; Gopnik, Alison

    2016-01-01

    Preschoolers use both direct observation of statistical data and informant testimony to learn causal relationships. Can children integrate information from these sources, especially when source reliability is uncertain? We investigate how children handle a conflict between what they hear and what they see. In Experiment 1, 4-year-olds were…

  12. 49 CFR 511.35 - Testimony upon oral examination.

    Science.gov (United States)

    2010-10-01

    ... sealed envelope on the party conducting the examination. That party shall transmit the envelope to the... envelope endorsed with the title and docket number of the action and marked “Testimony of [name of witness... the examination shall pay for the transcription. (g) Failure to attend or to serve subpoena; expenses...

  13. Parental influence on adolescent sexual behaviour among ...

    African Journals Online (AJOL)

    A significant relationship was found between participants' sexual behaviour and parental communication and parental monitoring (p<0.05). The study recommended increased parental involvement in communication and monitoring of adolescent sexual behaviour, bearing in mind the consequences of risky sexual ...

  14. Remembering to Forget: Testimony, Collective Memory and the ...

    African Journals Online (AJOL)

    Specifically, how does a text such as Antjie Krog\\'s Country of My Skull, which seeks to straddle the divide of personal, individualised memory and collective memory, contribute to this process in post-apartheid South Africa? Drawing on the proliferation of testimonies which emerged from the Truth Commission, in this text ...

  15. The impossible testimony: Celan in Derrida

    Directory of Open Access Journals (Sweden)

    Ricardo Forster

    2005-01-01

    Full Text Available Having as background the events associated to the genocide of the Jews in the Second World War, we will try to analyze the possibility conditions of the historical memory in general, and the testimony to events such as the holocaust, in particular. Following the French philosopher Jacques Derrida’s argument line, we will search in Paul Celan’s poetical work, the necessary elements to overcome the hurdles that hinder our understanding of the existence of revolting event

  16. O LOCAL DO TESTEMUNHOTHE PLACE OF TESTIMONY

    Directory of Open Access Journals (Sweden)

    Márcio Seligmann-Silva

    2010-06-01

    Full Text Available O texto divide-se em quatro partes. Na primeira, apresenta-se uma  análise do conceito de testemunho, pensado em termos etimológicos, e de seu  significado como categoria que significa uma relação particular com o “real”.  Na segunda parte, estuda-se a relação do testemunho com as modalidades de  escritas do Eu, com ênfase nos conceitos de diário e autobiografia. Em um  terceiro momento, apresenta-se o significado político do testemunho, como  instrumento de construção de uma memória contra o esquecimento e de um  “trabalho de memória” com relação aos traumas sociais. Na quarta parte,  estuda-se a situação sui generis do Brasil, onde ainda não se conseguiu  instituir uma prática do testemunho e da sua recepção, com relação à ditadura  civil-militar de 1964-1985. Este artigo retoma a fala do autor no “I Congresso Internacional da Cátedra Jorge de Sena  - Andanças Prodigiosas da Literatura”, realizado na Faculdade de Letras da  Universidade Federal do Rio de Janeiro, em outubro de 2009, bem como, em  determinados momentos, partes de outros artigos dedicados à questão do  testemunho que escreveu nos últimos anos. Palavras-Chave:  Testemunho. Memória. Trauma. Ditadura brasileira. Abstract This text has four  parts. 1 First it focuses on the concept of testimony, analyzing its etymology  and meaning as a special category that implies a singular relation with the  “real”. 2 It also discusses the relationship between the testimony and others  modalities of the writing in first person with emphasis on the concepts of  diary and autobiography. 3 After that, the text presents the political meaning  of the testimony, that works as a means of construction of a memory against the  oblivion as well as a “work of memory” concerning social traumas. 4 The last  section is dedicated to the study of the singular position of Brazil as a  country in Latin America that has not been able to

  17. Production Conditions of a kidnapping-testimonial literature boom in Colombia

    Directory of Open Access Journals (Sweden)

    Karen Lorena Romero Leal

    2017-01-01

    Alvaro Uribe, a period in which the farc became the enemy of the nation; therefore, the testimony denouncing their crimes echoed massively in privately owned media and in general in Colombian public opinion.

  18. 75 FR 13306 - Copyright Royalty Judges’ Authority to Subpoena a Nonparticipant to Appear and Give Testimony or...

    Science.gov (United States)

    2010-03-19

    .... 1305 (Office of Personnel Management & Merit Systems Protection Board may ``subpena witnesses and... or the vice chairman, the attendance and testimony of witnesses and the production of all documentary... the attendance and testimony of a witness, versus the mere authority to subpoena documentary...

  19. On the importance of considering heterogeneity in witnesses' competence levels when reconstructing crimes from multiple witness testimonies.

    Science.gov (United States)

    Waubert de Puiseau, Berenike; Greving, Sven; Aßfalg, André; Musch, Jochen

    2017-09-01

    Aggregating information across multiple testimonies may improve crime reconstructions. However, different aggregation methods are available, and research on which method is best suited for aggregating multiple observations is lacking. Furthermore, little is known about how variance in the accuracy of individual testimonies impacts the performance of competing aggregation procedures. We investigated the superiority of aggregation-based crime reconstructions involving multiple individual testimonies and whether this superiority varied as a function of the number of witnesses and the degree of heterogeneity in witnesses' ability to accurately report their observations. Moreover, we examined whether heterogeneity in competence levels differentially affected the relative accuracy of two aggregation procedures: a simple majority rule, which ignores individual differences, and the more complex general Condorcet model (Romney et al., Am Anthropol 88(2):313-338, 1986; Batchelder and Romney, Psychometrika 53(1):71-92, 1988), which takes into account differences in competence between individuals. 121 participants viewed a simulated crime and subsequently answered 128 true/false questions about the crime. We experimentally generated groups of witnesses with homogeneous or heterogeneous competences. Both the majority rule and the general Condorcet model provided more accurate reconstructions of the observed crime than individual testimonies. The superiority of aggregated crime reconstructions involving multiple individual testimonies increased with an increasing number of witnesses. Crime reconstructions were most accurate when competences were heterogeneous and aggregation was based on the general Condorcet model. We argue that a formal aggregation should be considered more often when eyewitness testimonies have to be assessed and that the general Condorcet model provides a good framework for such aggregations.

  20. Transitivity And The Narrator's Role In Selected TRC Testimonies

    African Journals Online (AJOL)

    Information Technology

    how the different narrators' roles and perspectives on the events shape their ... injustices committed in the past (Truth and Reconciliation of South Africa Report, Vol. ..... testimony, and CDS answers some additional questions from commissioners at .... self-explanatory: CDS construes the police as active participants bent on ...

  1. Conversion and the Real: The (Im)Possibility of Testimonial Representation.

    Science.gov (United States)

    Sremac, Srdjan

    Although the spiritual vibration of conversion can be felt (by the curious outsider) through what conversion performers say in their testimonial discourse, what transforms the convert 'on stage' into a 'new being' and what is 'the real' ( le réel ) in conversion performance remain unclear. An important question in this connection is, What is 'real' in a conversion representation, both with respect to the convert's interaction with the audience and to the construction of social reality? Following Lacan's tripartite register of the imaginary, the symbolic, and the real, in this essay I argue that through testimonial discourse converts construct social reality as an answer to the impossibility of 'the real' in their performative discursive practice. In the first part, I question the constructed nature of testimonial representations-as well as some academic knowledge production that has governed conversion research in the last few decades-and how these representations encourage 'outsiders' to read the narrative repertoire as a negation or mirroring 'the real' of the conversion experience. In the second part, I apply Roland Barthes' analytic reflections on photography to conversion research, especially the notions of the studium (the common ground of cultural meanings) and the punctum (a personal experience that inspires private meaning). This brings me to a number of theorists (mostly never used in the field of religious conversion)-Jacques Lacan, Roland Barthes, and Slavoj Žižek-who are important to the perspective that is developed in this essay.

  2. I've Got a Testimony: James Baldwin and the Broken Silences of Black Queer Men

    Directory of Open Access Journals (Sweden)

    McKinley E Melton

    2016-12-01

    Full Text Available James Baldwin writes within and against the testimonial tradition emerging from the Black Church, challenging the institution’s refusal to acknowledge the voices and experiences of black queer men. Baldwin’s autobiographical novel, Go Tell It on the Mountain, creates a space for Baldwin’s testimony to be expressed, and also lays the foundation for a tradition of black queer artists to follow. In the contemporary moment, poet Danez Smith inhabits Baldwin’s legacy, offering continuing critiques of the rigidity of conservative Christian ideologies, while publishing and performing poetry that gives voice to their own experiences, and those of the black queer community at large. These testimonies ultimately function as a means of rhetorical resistance, which not only articulates black queer lives and identities, but affirms them.

  3. Testimony from a former safeguards inspector

    International Nuclear Information System (INIS)

    Richter, R.

    1981-01-01

    Testimony by a former inspector relates the ineffectiveness and deficiencies of International Atomic Energy Agency (IAEA) safeguards inspections to Iraq's controversial nuclear program. He notes that all Iraqi inspections since 1976 were conducted by Soviet and Hungarian nationals and that the procedures require prior notice, limited authority, and other loopholes that permit numerous opportunities for materials to be diverted to facilities not subject to inspection. Granting that IAEA inspections are essential, he urges removing some of the constraints that permit noncooperating nations to thwart the intent of the Non-Proliferation Treaty

  4. 26 CFR 301.7456-1 - Administration of oaths and procurement of testimony; production of records of foreign...

    Science.gov (United States)

    2010-04-01

    ... Actions by the United States § 301.7456-1 Administration of oaths and procurement of testimony; production... 26 Internal Revenue 18 2010-04-01 2010-04-01 false Administration of oaths and procurement of testimony; production of records of foreign corporations, foreign trusts or estates and nonresident alien...

  5. 25 CFR 516.2 - When may a person to whom this part applies give testimony, make a statement or submit to interview?

    Science.gov (United States)

    2010-04-01

    ... testimony, make a statement or submit to interview? 516.2 Section 516.2 Indians NATIONAL INDIAN GAMING... whom this part applies give testimony, make a statement or submit to interview? (a) No person to whom... regulation, shall provide testimony, make a statement or submit to interview. (b) Whenever a subpoena...

  6. Evaluation of a Drowning Prevention Program Based on Testimonial Videos: A Randomized Controlled Trial.

    Science.gov (United States)

    Shen, Jiabin; Pang, Shulan; Schwebel, David C

    2016-06-01

    Unintentional drowning is the most common cause of childhood death in rural China. Global intervention efforts offer mixed results regarding the efficacy of educational programs. Using a randomized controlled design, we evaluated a testimonial-based intervention to reduce drowning risk among 280 3rd- and 4th-grade rural Chinese children. Children were randomly assigned to view either testimonials on drowning risk (intervention) or dog-bite risk (control). Safety knowledge and perceived vulnerability were measured by self-report questionnaires, and simulated behaviors in and near water were assessed with a culturally appropriate dollhouse task. Children in the intervention group had improved children's safety knowledge and simulated behaviors but not perceived vulnerability compared with controls. The testimonial-based intervention's efficacy appears promising, as it improved safety knowledge and simulated risk behaviors with water among rural Chinese children. © The Author 2015. Published by Oxford University Press on behalf of the Society of Pediatric Psychology. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  7. Educating Jurors about Forensic Evidence: Using an Expert Witness and Judicial Instructions to Mitigate the Impact of Invalid Forensic Science Testimony.

    Science.gov (United States)

    Eastwood, Joseph; Caldwell, Jiana

    2015-11-01

    Invalid expert witness testimony that overstated the precision and accuracy of forensic science procedures has been highlighted as a common factor in many wrongful conviction cases. This study assessed the ability of an opposing expert witness and judicial instructions to mitigate the impact of invalid forensic science testimony. Participants (N = 155) acted as mock jurors in a sexual assault trial that contained both invalid forensic testimony regarding hair comparison evidence, and countering testimony from either a defense expert witness or judicial instructions. Results showed that the defense expert witness was successful in educating jurors regarding limitations in the initial expert's conclusions, leading to a greater number of not-guilty verdicts. The judicial instructions were shown to have no impact on verdict decisions. These findings suggest that providing opposing expert witnesses may be an effective safeguard against invalid forensic testimony in criminal trials. © 2015 American Academy of Forensic Sciences.

  8. DO TESTIMONIES OF TRAUMATIC EVENTS DIFFER DEPENDING ON THE INTERVIEWER?

    Directory of Open Access Journals (Sweden)

    Ulrike Ehlert

    2013-01-01

    Full Text Available While differences in witness narratives due to different interviewers may have implications for their credibility in court, this study considers how investigative interviews by different parties to the proceedings, as well as the gender and nationality of interviewers, can influence the testimony of witnesses in court who share comparable traumatic experiences. The foundation of the analysis was answers given to judges, prosecutors, civil party lawyers and defence lawyers in the Extraordinary Chambers in the Courts of Cambodia (ECCC located in Phnom Penh. Transcribed testimonies of 24 victim witnesses and civil parties which were translated from Khmer into English were analysed using a computer-based text analysis program, the Linguistic Inquiry and Word Count (LIWC. Results showed that when answering questions by females, witnesses used significantly more cognitive process words. When interviewed by international rather than by Cambodian parties to the proceeding witness accounts were composed of significantly more verbal expressions of affective processes and of perceptual processes. Furthermore, witnesses used most cognitive and affective process words during the interview by civil party lawyers and defence lawyers. These results may be due to a prior supportive relationship between civil parties and their lawyers and due to a more interrogative question style by the defence lawyers, who attempt to undermine the credibility of the interviewed witnesses. Data shows that LIWC analysis is an appropriate method to examine witness accounts and, therefore, contributes to a better understanding of the complex relationship between testimony in events under litigation and credibility.

  9. Legal Professionals' Knowledge of Eyewitness Testimony in China: A Cross-Sectional Survey.

    Directory of Open Access Journals (Sweden)

    Lina Jiang

    Full Text Available To examine legal professionals' knowledge of a wide range of factors that affect eyewitness accuracy in China.A total of 812 participants, including 210 judges, 244 prosecutors, 202 police officers, and 156 defense attorneys, were asked to respond to 12 statements about eyewitness testimony and 3 basic demographic questions (i.e., gender, age, and prior experience.Although the judges and the defense attorneys had a somewhat higher number of correct responses than the other two groups, all groups showed limited knowledge of eyewitness testimony. In addition, the participants' responses to only four items (i.e., weapon focus, attitude and expectations, child suggestibility, and the impact of stress were roughly unanimous within the four legal professional groups. Legal professionals' gender showed no significant correlations with their knowledge of eyewitness testimony. Prior experiences were significantly and negatively correlated with the item on the knowledge of forgetting curve among judges but positively correlated with two items (i.e., attitudes and exposure time among defense attorneys and with 4 statements (i.e., the knowledge of attitudes and expectations, impact of stress, child witness accuracy, and exposure time among prosecutors.The findings suggest that knowledge of the factors that influence eyewitness accuracy must be more effectively communicated to legal professionals in the future.

  10. 20 CFR 403.125 - How will we handle requests for records, information, or testimony involving SSA's Office of the...

    Science.gov (United States)

    2010-04-01

    ...' Benefits SOCIAL SECURITY ADMINISTRATION TESTIMONY BY EMPLOYEES AND THE PRODUCTION OF RECORDS AND INFORMATION IN LEGAL PROCEEDINGS § 403.125 How will we handle requests for records, information, or testimony... Security Administration, 300 Altmeyer Building, 6401 Security Blvd., Baltimore, MD 21235-6401. ...

  11. Expert medical testimony for your injured patients.

    Science.gov (United States)

    Lang, Gerald J

    2013-10-01

    Many injured patients sustain some type of loss. If someone else is responsible for the injury, the injured patient can pursue compensation for this loss. In the course of treating an injured patient, you may be asked to participate in the legal process to resolve such claims. The basic components of a personal injury claim are reviewed. An overview of the legal process will help clarify your role in the legal process. Enhanced understanding will allow you to provide important medical testimony for your injured patient.

  12. War in Colombia testimonial literature: between memory, culture, violence and literature

    Directory of Open Access Journals (Sweden)

    Jorge Eduardo Suárez Gómez

    2011-07-01

    Full Text Available Colombia may be characterized as a society ruled over by “a routinization of war and oblivion”. When memories about violent events succeed in articulate themselves and transcend the private space, they are not necessarily incorporated to national memory through “memory policies” in transitional processes. These memories are “deposited” rather than discussed. Testimonial literature is one of those “deposits”. There are times when certain topics, witnesses, authors and narrative treatments attain an unexpected relevance. Such a relevance follows national factors, like the dynamics of conflict and society in Colombia and abroad, such as a “turn to past”. When making a survey across the development of the testimonial genre from mid-20th century Violence up to our times, the gravitation of several cultures of memory is made evident in a society where oblivion appears to prevail.

  13. Suicide and parasuicide in ancient personal testimonies.

    Science.gov (United States)

    van Hooff, A J

    1993-01-01

    Attitudes toward suicide have not always been the same as they are today, and understanding the ideas of other cultures and times could enable us to reexamine contemporary conceptions of self-killing. Greek and Roman personal testimonies were examined to investigate the thesis that ancients did not see suicide as caused by psychic or emotional forces. Indeed, though the documents of antiquity give us a closer look into personal motives, they demonstrate that even would-be self-killers themselves wished to regard suicide as a rational act of volition.

  14. Children's Lies and Their Detection: Implications for Child Witness Testimony

    Science.gov (United States)

    Talwar, Victoria; Crossman, Angela M.

    2012-01-01

    The veracity of child witness testimony is central to the justice system where there are serious consequences for the child, the accused, and society. Thus, it is important to examine how children's lie-telling abilities develop and the factors that can influence their truthfulness. The current review examines children's lie-telling ability in…

  15. Addressing challenges to MMPI-2-RF-based testimony: questions and answers.

    Science.gov (United States)

    Ben-Porath, Yossef S

    2012-11-01

    Introduction of a new version of a psychological test brings with it challenges that can be accentuated by the adversarial nature of the legal process. In the case of the Minnesota Multiphasic Personality Inventory-2 Restructured Form (MMPI-2-RF), these challenges can be addressed by becoming familiar with the rationale for and the methods used in revising the inventory, the information contained in the test manuals, and the growing peer-reviewed literature on the test. Potential challenges to MMPI-2-RF-based testimony are identified in this article and discussed in question and answer format. The questions guiding this discussion are based on the Daubert factors, established in 1993 by the US Supreme Court as criteria for gauging the scientific validity of proffered expert testimony. The answers to these questions apply more broadly to testimony in depositions, pre-trial hearings, and at trial. Consideration of the MMPI-2-RF in light of the Daubert factors indicates that the instrument has been subjected to extensive empirical testing and that a substantial peer-reviewed literature is available to guide and support its use. Information about the known and potential rate of error associated with MMPI-2-RF scores is available, and standard procedures for administration, scoring, and interpretation of the inventory are detailed in the test administration manual. Indicators of MMPI-2-RF acceptance can be cited, and criticisms of the MMPI-2-RF can be addressed with information available in the test documents and an extensive, modern, and actively growing peer-reviewed literature.

  16. A HOLISTIC MODEL FOR THE EVALUATION OF THE TESTIMONY (HELPT

    Directory of Open Access Journals (Sweden)

    Antonio L. Manzanero

    2015-05-01

    Full Text Available A proposed protocol for evaluating the statements and identifications made by the potential victims of crimes is presented in this paper. The protocol, called HELPT, is part of a holistic approach to evaluating the testimony that takes into account all of the possible factors of influence: encoding, retention and recovery. Among these factors, the following will be relevant: a the ability of victims to testify, as well as cognitive processes of attention, perception, memory and language; b the specific characteristics of the offence; c the history of the event and its consequences; d other factors that might affect the quality and accuracy of the statements and identifications, such as the number of times the victim had to tell what happened, the methods used to obtain the story and possibilities of suggestion. The method includes specific procedures for exhaustive analysis of the testimonies and for the formulation and testing of hypotheses (Scott & Manzanero, 2015, the evaluation of the competence to testify (Contreras, Silva, & Manzanero, 2015 and the obtaining of statements (González, Muñoz, Sotoca, & Manzanero, 2013.

  17. Parenting Stress in Parents of Infants With Congenital Heart Disease and Parents of Healthy Infants: The First Year of Life.

    Science.gov (United States)

    Golfenshtein, Nadya; Hanlon, Alexandra L; Deatrick, Janet A; Medoff-Cooper, Barbara

    2017-12-01

    While we know that the parents of infants with congenital heart disease (CHD), the most prevalent group of congenital anomalies, experience increased parenting stress, the stress levels throughout infancy have yet to be studied. Stress experienced by parents beyond the normative stress of parenting can interfere with parenting processes, and bear adverse family outcomes. This prospective cohort study was conducted to describe and compare parenting stress levels during infancy between parents of infants with complex CHD and parents of healthy infants. The Parenting Stress Index-Long Form was distributed to parents of infants with complex CHD and parents of healthy infants (N = 129). T-tests were used to compare stress between groups at 3, 6, 9, and 12 months of age. Parents of infants with complex CHD had higher parenting stress than parents of healthy infants on multiple subscales on the Child and Parent Domains, at 3 months of age. The stress remained higher on the demandingness subscale throughout infancy. Parents of CHD infants also demonstrated significantly higher stress scores on the life stress subscale at 12 months of age. Findings highlight stressful periods related to parenting infants with CHD, which may increase existing psycho-social risk for parents of infants with CHD. Early family intervention may promote parental adaptation to the illness, and help establishing healthy parenting practices.

  18. 36 CFR 1012.2 - What is the Presidio Trust's policy on granting requests for employee testimony or Presidio Trust...

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false What is the Presidio Trust's policy on granting requests for employee testimony or Presidio Trust records? 1012.2 Section 1012.2 Parks, Forests, and Public Property PRESIDIO TRUST LEGAL PROCESS: TESTIMONY BY EMPLOYEES AND PRODUCTION OF RECORDS General Information § 1012.2 What...

  19. Effect evaluation of a road safety education program based on victim testimonials in high schools in Belgium.

    Science.gov (United States)

    Cuenen, Ariane; Brijs, Kris; Brijs, Tom; Van Vlierden, Karin; Daniels, Stijn; Wets, Geert

    2016-09-01

    For several decades policy makers worldwide have experimented with testimonials as a strategy to promote road safety supportive views in a wide variety of target populations such as recidivists and students. In its basic format, a (relative of) a victim or an offender brings a personal testimonial of what it is to experience a traffic accident. The underlying idea is that such a testimonial will emotionally affect participants, thereby stimulating them to cognitively reflect upon their own behavior and responsibility as a road user. Unfortunately, empirical literature on the effectiveness of this strategy is rather scarce and inconsistent. This study investigated the effect of a large-scale program with victim testimonials for high schools in Belgium on five socio-cognitive and behavioral variables drawn from the Theory of Planned Behavior (i.e., attitude, subjective norm, perceived behavioral control, behavioral intention and behavior). Moreover, this study investigated program effects on participants' cognitive and emotional estate and whether this influences the program's impact on socio-cognitive and behavioral variables. Our test sample included 1362 students, who were assigned to a baseline - follow-up group and a post-test - follow-up group. We questioned both groups, a first time (just before or after session attendance) on paper, and a second time (two months after session attendance) online. Results indicate the program had, both immediate and two months after attendance, small to medium positive effects on most socio-cognitive and behavioral variables. However, effects depended on participants' demographic profile, their baseline values on the socio-cognitive and behavioral variables, and the degree to which they were cognitively/emotionally affected by the program. We discuss the practical implications of these findings and formulate recommendations for the development of future interventions based on victim testimonials. Copyright © 2016 Elsevier Ltd

  20. Index of Reports and Testimony: Fiscal Year 1991.

    Science.gov (United States)

    1991-12-01

    74FS, Apr. 24 U.S.-Mexico Trade: Some U.S. Wood Furniture Firms Relocated From Los Angeles Area to Mexico GAO NSIAD-91-191 Apr. 24 El Comercio Entre U.S...Testimony: Fiscal Year 1991 El Comercio Entry Los EE. UU. y Mexico: Informacion acerca de la reglamentacion ambiental y su cumplimiento GAO NSIAi)-91-227SV...Considerations GAO/RCED-91-240 Sept. 17 Air Traffic Control: FAA’s Transition of Communications System to Digital Technology GAO/IMTEC-91-77FS Sept. 26

  1. The Voice of the Innocent: Propaganda and Childhood Testimonies of War

    Science.gov (United States)

    de La Ferrière, Alexis Artaud

    2014-01-01

    Childhood testimonies have become a familiar component of war reporting and peace advocacy through the publication of children's drawings, oral descriptions of wartime trauma and wartime writing. While such practices have the merit of publicising children's experiences, it is also the case that the selection and distribution of these materials is…

  2. 36 CFR 1251.6 - How does the General Counsel determine whether to comply with a demand for records or testimony?

    Science.gov (United States)

    2010-07-01

    ... determine whether to comply with a demand for records or testimony? 1251.6 Section 1251.6 Parks, Forests... § 1251.6 How does the General Counsel determine whether to comply with a demand for records or testimony? The General Counsel may consider the following factors in determining whether or not to grant an...

  3. Efficacy of Web-Based Collection of Strength-Based Testimonials for Text Message Extension of Youth Suicide Prevention Program: Randomized Controlled Experiment.

    Science.gov (United States)

    Thiha, Phyo; Pisani, Anthony R; Gurditta, Kunali; Cherry, Erin; Peterson, Derick R; Kautz, Henry; Wyman, Peter A

    2016-11-09

    Equipping members of a target population to deliver effective public health messaging to peers is an established approach in health promotion. The Sources of Strength program has demonstrated the promise of this approach for "upstream" youth suicide prevention. Text messaging is a well-established medium for promoting behavior change and is the dominant communication medium for youth. In order for peer 'opinion leader' programs like Sources of Strength to use scalable, wide-reaching media such as text messaging to spread peer-to-peer messages, they need techniques for assisting peer opinion leaders in creating effective testimonials to engage peers and match program goals. We developed a Web interface, called Stories of Personal Resilience in Managing Emotions (StoryPRIME), which helps peer opinion leaders write effective, short-form messages that can be delivered to the target population in youth suicide prevention program like Sources of Strength. To determine the efficacy of StoryPRIME, a Web-based interface for remotely eliciting high school peer leaders, and helping them produce high-quality, personal testimonials for use in a text messaging extension of an evidence-based, peer-led suicide prevention program. In a double-blind randomized controlled experiment, 36 high school students wrote testimonials with or without eliciting from the StoryPRIME interface. The interface was created in the context of Sources of Strength-an evidence-based youth suicide prevention program-and 24 ninth graders rated these testimonials on relatability, usefulness/relevance, intrigue, and likability. Testimonials written with the StoryPRIME interface were rated as more relatable, useful/relevant, intriguing, and likable than testimonials written without StoryPRIME, P=.054. StoryPRIME is a promising way to elicit high-quality, personal testimonials from youth for prevention programs that draw on members of a target population to spread public health messages. ©Phyo Thiha, Anthony

  4. Testimony before the US-China Economic Security Review Commission: China's Agriculture Policy and US Access to China's Market

    OpenAIRE

    Dermot J. Hayes

    2013-01-01

    Testimony before the US-China Economic and Security Review Commission on April 25, 2013, by Dermot Hayes, professor of Economics and Finance, Iowa State University. Testimony covers impacts on food demand from China's rising incomes and urbanization; the viability of China's attempt to remain self-sufficient in meat and key staple crop production under inherent supply constraints, and the possible technological- and policy-based measures they may pursue in regard of such constraints; and, the...

  5. "It Was the Best Decision of My Life": a thematic content analysis of former medical tourists' patient testimonials.

    Science.gov (United States)

    Hohm, Carly; Snyder, Jeremy

    2015-01-22

    Medical tourism is international travel with the intention of receiving medical care. Medical tourists travel for many reasons, including cost savings, limited domestic access to specific treatments, and interest in accessing unproven interventions. Medical tourism poses new health and safety risks to patients, including dangers associated with travel following surgery, difficulty assessing the quality of care abroad, and complications in continuity of care. Online resources are important to the decision-making of potential medical tourists and the websites of medical tourism facilitation companies (companies that may or may not be affiliated with a clinic abroad and help patients plan their travel) are an important source of online information for these individuals. These websites fail to address the risks associated with medical tourism, which can undermine the informed decision-making of potential medical tourists. Less is known about patient testimonials on these websites, which can be a particularly powerful influence on decision-making. A thematic content analysis was conducted of patient testimonials hosted on the YouTube channels of four medical tourism facilitation companies. Five videos per company were viewed. The content of these videos was analyzed and themes identified and counted for each video. Ten main themes were identified. These themes were then grouped into three main categories: facilitator characteristics (e.g., mentions of the facilitator by name, reference to the price of the treatment or to cost savings); service characteristics (e.g., the quality and availability of the surgeon, the quality and friendliness of the support staff); and referrals (e.g., referrals to other potential medical tourists). These testimonials were found either not to mention risks associated with medical tourism or to claim that these risks can be effectively managed through the use of the facilitation company. The failure fully to address the risks of medical

  6. Speciality of psychological processes in relation to children testimony

    Directory of Open Access Journals (Sweden)

    Brkić Snežana S.

    2013-01-01

    Full Text Available Witnesses are important and very frequent sources of evidence in criminal trial. The correct estimate the credibility of witneses is of great significance. Therefore the judge must obtain some psychological knowledge. He must know some essential things about psychological processes and psychological features which are in relation to witness testimony. The author brings into focus such processes as. Memory, thinking, speech and emphasizes the speciality of those psychological processes by children. The author also point to some psychological features of children witnesses as suggestibility.

  7. NRC testimony before the Subcommittee on Nuclear Regulation of the Committee on Environment and Public Works, United States Senate

    International Nuclear Information System (INIS)

    1977-10-01

    NRC staff testimony before the U.S. Senate's Subcommittee on Nuclear Regulation, Committee on Environment and Public, is presented. The testimony pertains to the staff's role in the licensing process affecting the Virginia Electric and Power Company's North Anna nuclear plant. It explains the steps taken since 1973, and particularly since formation of the U.S. Nuclear Regulatory Commission in January 1975, to improve the timeliness of submission of information from the staff to the Commission licensing boards

  8. Drawing trauma: the therapeutic potential of witnessing the child's visual testimony of war.

    Science.gov (United States)

    Farley, Lisa; Mishra Tarc, Aparna

    2014-10-01

    Countertransference plays an often neglected role in witnessing children's testimony of war and trauma. A dual notion of countertransference, based on the work of Winnicott and Klein, is offered that involves both internal conflict related to early life experience and socially mediated notions of childhood, war, and trauma circulating in a given time and place. A drawing by a thirteen-year-old boy living in the refugee camps in Darfur is used to show how countertransference affects our interpretation of the image, even while its symbolization in language establishes the conditions for a potentially therapeutic response. It is argued that a psychoanalytic reading can supplement the "legal-conscious terminology" in which the Darfur archive has been predominantly framed (Felman 2002, p. 5). This expanded view of witnessing involves reading the child's testimony both for the history of violence it conveys and for the social and emotional histories it calls up in the witness as the ground and possibility of justice. © 2014 by the American Psychoanalytic Association.

  9. A full-text english database of testimonies of those exposed to radiation near the Semipalatinsk nuclear test site, Kazakhstan

    OpenAIRE

    Matsuo, Masatsugu; Kawano, Noriyuki; Hirabayashi, Kyoko; Tooka, Yasuyuki; Apsalikov, Kazbek Negamatovich; Hoshi, Masaharu

    2004-01-01

    The present paper is a sequel to the initial report (Kawano et al 2003a) of the project for a full-text Japanese database of the testimonies of those exposed to radiation near the nuclear test site of Semipalatinsk, Kazakhstan. 139 testimonies were gathered in four villages near Semipalatinsk in 2002. We translated them into English from Russian and Kazakh, and created a full-text database by using a Latin script text retrieval program, TERESA. The present paper attempts at essentially the sa...

  10. From early detection to rehabilitation in the community: reading beyond the blog testimonies of survivors' quality of life and prostate cancer representation.

    Science.gov (United States)

    Zanchetta, Margareth Santos; Cognet, Marguerite; Lam-Kin-Teng, Mary Rachel; Dumitriu, Marie Elisabeth; Renaud, Lise; Rhéaume, Jacques

    2016-12-16

    Survivors' testimonies can reveal much about men's experiences of prostate cancer and impacts on their quality of life (QOL) during the clinical trajectory of the disease. These survivors' shared thoughts and views were hypothesized to reflect salient features of their lived social representation of prostate cancer. We explored the content of testimonies posted by men to a public blog hosted by a French national prostate cancer patients' association. The study question, "What do French bloggers' testimonies reveal about their lived experiences with prostate cancer, especially regarding their quality of life in community settings, that underpin their social representation of prostate cancer?" guided the exploration and analysis of the textual data. The aims were to better understand men's experiences and predominant thoughts and views, to elucidate patients' behaviours, and to enlighten medical policy and practice. Explore issues of QOL as reported by French prostate cancer survivors in a public blog by: (a) identifying the salient aspects and issues of the experience of living with prostate cancer from the perspective of survivors; and (b) analyzing the content in the posted testimonies regarding perceived and lived impacts of prostate cancer on QOL. A critical ethnographic study guided the selection of textual data from 196 male bloggers' testimonies about prostate cancer posted in the period from 2008 to 2013. Media content analysis method was undertaken on blog testimonies, framed by a multidimensional conceptual framework of QOL. Testimonies focused mainly on medical care and rehabilitation, recovery, health education and self-care, as well as on a global vision of prostate cancer and its impacts on personal views of manhood and masculinity. The language used indicated that political, educative and compassionate discourses were intertwined to create a complex representation of the experience and effects of prostate cancer; this multi-faceted representation can

  11. Bearing system

    Science.gov (United States)

    Kapich, Davorin D.

    1987-01-01

    A bearing system includes backup bearings for supporting a rotating shaft upon failure of primary bearings. In the preferred embodiment, the backup bearings are rolling element bearings having their rolling elements disposed out of contact with their associated respective inner races during normal functioning of the primary bearings. Displacement detection sensors are provided for detecting displacement of the shaft upon failure of the primary bearings. Upon detection of the failure of the primary bearings, the rolling elements and inner races of the backup bearings are brought into mutual contact by axial displacement of the shaft.

  12. CBO Testimony: The Ability of the U.S. Military to Sustain an Occupation in Iraq

    National Research Council Canada - National Science Library

    Holtz-Eakin, Douglas

    2003-01-01

    .... This testimony describes the results of that work. In performing its analysis, CBO made no assumptions about how long the occupation might last or about the size of the force that might be necessary...

  13. Genetic variation, relatedness, and effective population size of polar bears (Ursus maritimus) in the southern Beaufort Sea, Alaska.

    Science.gov (United States)

    Cronin, Matthew A; Amstrup, Steven C; Talbot, Sandra L; Sage, George K; Amstrup, Kristin S

    2009-01-01

    Polar bears (Ursus maritimus) are unique among bears in that they are adapted to the Arctic sea ice environment. Genetic data are useful for understanding their evolution and can contribute to management. We assessed parentage and relatedness of polar bears in the southern Beaufort Sea, Alaska, with genetic data and field observations of age, sex, and mother-offspring and sibling relationships. Genotypes at 14 microsatellite DNA loci for 226 bears indicate that genetic variation is comparable to other populations of polar bears with mean number of alleles per locus of 7.9 and observed and expected heterozygosity of 0.71. The genetic data verified 60 field-identified mother-offspring pairs and identified 10 additional mother-cub pairs and 48 father-offspring pairs. The entire sample of related and unrelated bears had a mean pairwise relatedness index (r(xy)) of approximately zero, parent-offspring and siblings had r(xy) of approximately 0.5, and 5.2% of the samples had r(xy) values within the range expected for parent-offspring. Effective population size (N(e) = 277) and the ratio of N(e) to total population size (N(e)/N = 0.182) were estimated from the numbers of reproducing males and females. N(e) estimates with genetic methods gave variable results. Our results verify and expand field data on reproduction by females and provide new data on reproduction by males and estimates of relatedness and N(e) in a polar bear population.

  14. Optimizing the Presentation of Mental Health Information in Social Media: The Effects of Health Testimonials and Platform on Source Perceptions, Message Processing, and Health Outcomes.

    Science.gov (United States)

    Quintero Johnson, Jessie M; Yilmaz, Gamze; Najarian, Kristy

    2017-09-01

    Using social media for the purpose of disseminating mental health information is a critical area of scientific inquiry for health communication professionals. The purpose of this study was to investigate whether the presence of a first-person testimonial in educational mental health information placed in Facebook and Twitter messages influenced college students' (N = 257) source perceptions, information processing, cognitive elaboration, health information recall, beliefs, and behavioral intentions. Results show that exposure to social media messages that featured mental health information embedded with a testimonial predicted less source homophily and more critical thoughts about the social media source, less systematic message processing, and less cognitive elaboration. Health information recall was significantly impacted by both the social media platform and message content such that participants in the testimonial condition on Facebook were more likely to recall the health facts in those messages whereas participants who viewed the testimonial in Twitter were less likely to recall the facts in those tweets. Compared to those who read Facebook messages, participants who read Twitter messages reported higher levels of systematic message processing. These findings suggest that the integration of health testimonials into social media messages might inadvertently provoke psychological resistance to mental health information, thereby reducing the persuasive impact of those messages.

  15. Journal bearing

    Science.gov (United States)

    Menke, John R.; Boeker, Gilbert F.

    1976-05-11

    1. An improved journal bearing comprising in combination a non-rotatable cylindrical bearing member having a first bearing surface, a rotatable cylindrical bearing member having a confronting second bearing surface having a plurality of bearing elements, a source of lubricant adjacent said bearing elements for supplying lubricant thereto, each bearing element consisting of a pair of elongated relatively shallowly depressed surfaces lying in a cylindrical surface co-axial with the non-depressed surface and diverging from one another in the direction of rotation and obliquely arranged with respect to the axis of rotation of said rotatable member to cause a flow of lubricant longitudinally along said depressed surfaces from their distal ends toward their proximal ends as said bearing members are rotated relative to one another, each depressed surface subtending a radial angle of less than 360.degree., and means for rotating said rotatable bearing member to cause the lubricant to flow across and along said depressed surfaces, the flow of lubricant being impeded by the non-depressed portions of said second bearing surface to cause an increase in the lubricant pressure.

  16. 15 CFR 15.13 - Demand for testimony or production of documents: Department policy.

    Science.gov (United States)

    2010-01-01

    ...; (d) To avoid spending the time and money of the United States for private purposes; (e) To preserve... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Demand for testimony or production of documents: Department policy. 15.13 Section 15.13 Commerce and Foreign Trade Office of the Secretary of...

  17. Camshaft bearing arrangement

    Energy Technology Data Exchange (ETDEWEB)

    Aoi, K.; Ozawa, T.

    1986-06-10

    A bearing arrangement is described for the camshaft of an internal combustion engine or the like which camshaft is formed along its length in axial order with a first bearing surface, a first cam lobe, a second bearing surface, a second cam lobe, a third bearing surface, a third cam lobe and a fourth bearing surface, the improvement comprising first bearing means extending around substantially the full circumference of the first bearing surface and journaling the first bearing surface, second bearing means extending around substantially less than the circumference of the second bearing surface and journaling the second bearing surface, third bearing means extending around substantially less than the circumference of the third bearing surface and journaling the third bearing surface, and fourth bearing means extending around substantially the full circumference of the fourth bearing surface and journaling the first bearing surface.

  18. Exposure to Domestic Violence between Parents: A Perspective from Tehran, Iran

    Science.gov (United States)

    Vameghi, Meroe; Feizzadeh, Ali; Mirabzadeh, Arash; Feizzadeh, Golnaz

    2010-01-01

    Women may bear the brunt of domestic violence, but children are also inflicted by the consequences of violence between their parents. We sought to evaluate the lifetime prevalence of exposure to physical violence between parents among some senior secondary school students in Tehran. The study was conducted on senior secondary school students in…

  19. Undermining Reasonableness: Expert Testimony in a Case Involving a Battered Woman Who Kills

    Science.gov (United States)

    Terrance, Cheryl; Matheson, Kimberly

    2003-01-01

    Student participants (N = 316) viewed a videotaped simulated case involving a woman who had entered a self-defense plea in the shooting death of her abusive husband. As successful claims of self-defense rest on the portrayal of a defendant who has responded reasonably to his/her situation, the implications of various forms of expert testimony in…

  20. 78 FR 72850 - Production of Nonpublic Records and Testimony of OPIC Employees in Legal Proceedings

    Science.gov (United States)

    2013-12-04

    ... of Nonpublic Records and Testimony of OPIC Employees in Legal Proceedings AGENCY: Overseas Private...; a major increase in costs or prices; or significant adverse effects on competition, employment, investment, productivity, innovation, or on the ability of United State based companies to compete with...

  1. Women Entrepreneurs: Their Success and Problems. Hearing before the Committee on Small Business, United States Senate, Ninety-Eighth Congress, Second Session (Eugene, Oregon).

    Science.gov (United States)

    Congress of the U.S., Washington, DC. Senate Committee on Small Business.

    This is a congressional hearing to acquire testimony and information about women in business or about unusual problems that have been found. Testimony includes statements from individuals representing Big Bear Shopper, Inc.; United States Business and Professional Women (BPW/USA); Rural Small Business Programs, Lane Community College;…

  2. Children and Families in the Midwest: Employment, Family Services and the Rural Economy. Hearing before the Select Committee on Children, Youth, and Families. House of Representatives, Ninety-Ninth Congress, Second Session (Galesburg, IL, August 11, 1986).

    Science.gov (United States)

    Congress of the U.S., Washington, DC. House Select Committee on Children, Youth, and Families.

    The House select committee met to hear testimony from parents, children, service providers, and researchers concerning the effects of job and income loss on families in central Illinois. The testimony of the first panel consisted of personal narratives. A high school student whose parents may move the family in order to find better paying jobs…

  3. Climate Testimonies and Climate-crisis Narratives. Inuit Delegated to Speak on Behalf of the Climate

    DEFF Research Database (Denmark)

    Bjørst, Lill Rastad

    2012-01-01

    challenges the use of climate testimonies in the international climatechange debate. Specifically, what is drawn upon in these personal experiences with the environment, and how is it useful in a public, political, or scientific context? In the conclusion of this article, it is argued that dominant climate...

  4. Grizzly bear

    Science.gov (United States)

    Schwartz, C.C.; Miller, S.D.; Haroldson, M.A.; Feldhamer, G.; Thompson, B.; Chapman, J.

    2003-01-01

    The grizzly bear inspires fear, awe, and respect in humans to a degree unmatched by any other North American wild mammal. Like other bear species, it can inflict serious injury and death on humans and sometimes does. Unlike the polar bear (Ursus maritimus) of the sparsely inhabited northern arctic, however, grizzly bears still live in areas visited by crowds of people, where presence of the grizzly remains physically real and emotionally dominant. A hike in the wilderness that includes grizzly bears is different from a stroll in a forest from which grizzly bears have been purged; nighttime conversations around the campfire and dreams in the tent reflect the presence of the great bear. Contributing to the aura of the grizzly bear is the mixture of myth and reality about its ferocity. unpredictable disposition, large size, strength, huge canines, long claws, keen senses, swiftness, and playfulness. They share characteristics with humans such as generalist life history strategies. extended periods of maternal care, and omnivorous diets. These factors capture the human imagination in ways distinct from other North American mammals. Precontact Native American legends reflected the same fascination with the grizzly bear as modern stories and legends (Rockwell 1991).

  5. Trust in Testimony about Strangers: Young Children Prefer Reliable Informants Who Make Positive Attributions

    Science.gov (United States)

    Boseovski, Janet J.

    2012-01-01

    Young children have been described as critical consumers of information, particularly in the domain of language learning. Indeed, children are more likely to learn novel words from people with accurate histories of object labeling than with inaccurate ones. But what happens when informant testimony conflicts with a tendency to see the world in a…

  6. Parents in death-related literature for children.

    Science.gov (United States)

    Corr, Charles A

    This article explores ways in which parents are represented as being involved with children in death and loss experiences. These representations are taken from 46 selected examples of death-related literature designed to be read by or with children. The main goal for us is to ask how parents are portrayed in these books and how their interactions with children are depicted. Since parents usually bear primary responsibility for the care of their children, they are ordinarily expected to share their experience and insights with their children, and to help children cope with death and loss. What do they do and how do they help (or not help) children in this body of literature?

  7. Nature vs. Nurture: Evidence for Social Learning of Conflict Behaviour in Grizzly Bears.

    Science.gov (United States)

    Morehouse, Andrea T; Graves, Tabitha A; Mikle, Nate; Boyce, Mark S

    2016-01-01

    The propensity for a grizzly bear to develop conflict behaviours might be a result of social learning between mothers and cubs, genetic inheritance, or both learning and inheritance. Using non-invasive genetic sampling, we collected grizzly bear hair samples during 2011-2014 across southwestern Alberta, Canada. We targeted private agricultural lands for hair samples at grizzly bear incident sites, defining an incident as an occurrence in which the grizzly bear caused property damage, obtained anthropogenic food, or killed or attempted to kill livestock or pets. We genotyped 213 unique grizzly bears (118 M, 95 F) at 24 microsatellite loci, plus the amelogenin marker for sex. We used the program COLONY to assign parentage. We evaluated 76 mother-offspring relationships and 119 father-offspring relationships. We compared the frequency of problem and non-problem offspring from problem and non-problem parents, excluding dependent offspring from our analysis. Our results support the social learning hypothesis, but not the genetic inheritance hypothesis. Offspring of problem mothers are more likely to be involved in conflict behaviours, while offspring from non-problem mothers are not likely to be involved in incidents or human-bear conflicts themselves (Barnard's test, p = 0.05, 62.5% of offspring from problem mothers were problem bears). There was no evidence that offspring are more likely to be involved in conflict behaviour if their fathers had been problem bears (Barnard's test, p = 0.92, 29.6% of offspring from problem fathers were problem bears). For the mother-offspring relationships evaluated, 30.3% of offspring were identified as problem bears independent of their mother's conflict status. Similarly, 28.6% of offspring were identified as problem bears independent of their father's conflict status. Proactive mitigation to prevent female bears from becoming problem individuals likely will help prevent the perpetuation of conflicts through social learning.

  8. Nature vs. Nurture: Evidence for Social Learning of Conflict Behaviour in Grizzly Bears.

    Directory of Open Access Journals (Sweden)

    Andrea T Morehouse

    Full Text Available The propensity for a grizzly bear to develop conflict behaviours might be a result of social learning between mothers and cubs, genetic inheritance, or both learning and inheritance. Using non-invasive genetic sampling, we collected grizzly bear hair samples during 2011-2014 across southwestern Alberta, Canada. We targeted private agricultural lands for hair samples at grizzly bear incident sites, defining an incident as an occurrence in which the grizzly bear caused property damage, obtained anthropogenic food, or killed or attempted to kill livestock or pets. We genotyped 213 unique grizzly bears (118 M, 95 F at 24 microsatellite loci, plus the amelogenin marker for sex. We used the program COLONY to assign parentage. We evaluated 76 mother-offspring relationships and 119 father-offspring relationships. We compared the frequency of problem and non-problem offspring from problem and non-problem parents, excluding dependent offspring from our analysis. Our results support the social learning hypothesis, but not the genetic inheritance hypothesis. Offspring of problem mothers are more likely to be involved in conflict behaviours, while offspring from non-problem mothers are not likely to be involved in incidents or human-bear conflicts themselves (Barnard's test, p = 0.05, 62.5% of offspring from problem mothers were problem bears. There was no evidence that offspring are more likely to be involved in conflict behaviour if their fathers had been problem bears (Barnard's test, p = 0.92, 29.6% of offspring from problem fathers were problem bears. For the mother-offspring relationships evaluated, 30.3% of offspring were identified as problem bears independent of their mother's conflict status. Similarly, 28.6% of offspring were identified as problem bears independent of their father's conflict status. Proactive mitigation to prevent female bears from becoming problem individuals likely will help prevent the perpetuation of conflicts through social

  9. Nature vs. nurture: Evidence for social learning of conflict behaviour in grizzly bears

    Science.gov (United States)

    Morehouse, Andrea T.; Graves, Tabitha A.; Mikle, Nathaniel; Boyce, Mark S.

    2016-01-01

    The propensity for a grizzly bear to develop conflict behaviours might be a result of social learning between mothers and cubs, genetic inheritance, or both learning and inheritance. Using non-invasive genetic sampling, we collected grizzly bear hair samples during 2011–2014 across southwestern Alberta, Canada. We targeted private agricultural lands for hair samples at grizzly bear incident sites, defining an incident as an occurrence in which the grizzly bear caused property damage, obtained anthropogenic food, or killed or attempted to kill livestock or pets. We genotyped 213 unique grizzly bears (118 M, 95 F) at 24 microsatellite loci, plus the amelogenin marker for sex. We used the program COLONY to assign parentage. We evaluated 76 mother-offspring relationships and 119 father-offspring relationships. We compared the frequency of problem and non-problem offspring from problem and non-problem parents, excluding dependent offspring from our analysis. Our results support the social learning hypothesis, but not the genetic inheritance hypothesis. Offspring of problem mothers are more likely to be involved in conflict behaviours, while offspring from non-problem mothers are not likely to be involved in incidents or human-bear conflicts themselves (Barnard’s test, p = 0.05, 62.5% of offspring from problem mothers were problem bears). There was no evidence that offspring are more likely to be involved in conflict behaviour if their fathers had been problem bears (Barnard’s test, p = 0.92, 29.6% of offspring from problem fathers were problem bears). For the mother-offspring relationships evaluated, 30.3% of offspring were identified as problem bears independent of their mother’s conflict status. Similarly, 28.6% of offspring were identified as problem bears independent of their father’s conflict status. Proactive mitigation to prevent female bears from becoming problem individuals likely will help prevent the perpetuation of conflicts through social learning.

  10. 77 FR 70423 - Black Bear Hydro Partners, LLC and Black Bear Development Holdings, LLC and Black Bear SO, LLC...

    Science.gov (United States)

    2012-11-26

    ... Bear Hydro Partners, LLC and Black Bear Development Holdings, LLC and Black Bear SO, LLC; Notice of..., 2012, Black Bear Hydro Partners, LLC, sole licensee (transferor) and Black Bear Development Holdings, LLC and Black Bear SO, LLC (transferees) filed an application for the partial the transfer of licenses...

  11. Guidelines for the ethical use of neuroimages in medical testimony: report of a multidisciplinary consensus conference.

    Science.gov (United States)

    Meltzer, C C; Sze, G; Rommelfanger, K S; Kinlaw, K; Banja, J D; Wolpe, P R

    2014-04-01

    With rapid advances in neuroimaging technology, there is growing concern over potential misuse of neuroradiologic imaging data in legal matters. On December 7 and 8, 2012, a multidisciplinary consensus conference, Use and Abuse of Neuroimaging in the Courtroom, was held at Emory University in Atlanta, Georgia. Through this interactive forum, a highly select group of experts-including neuroradiologists, neurologists, forensic psychiatrists, neuropsychologists, neuroscientists, legal scholars, imaging statisticians, judges, practicing attorneys, and neuroethicists-discussed the complex issues involved in the use of neuroimaging data entered into legal evidence and for associated expert testimony. The specific contexts of criminal cases, child abuse, and head trauma were especially considered. The purpose of the conference was to inform the development of guidelines on expert testimony for the American Society of Neuroradiology and to provide principles for courts on the ethical use of neuroimaging data as evidence. This report summarizes the conference and resulting recommendations.

  12. CBO Testimony: Statement of Robert F. Hale, Assistant Director, National Security Division, Congressional Budget Office

    National Research Council Canada - National Science Library

    Hale, Robert F

    1991-01-01

    .... This testimony, by Robert F. Hale, Congressional Budget Office, covers the following topics: Socioeconomic Backgrounds of Enlisted Recruits, Racial Mix of Enlisted Recruits, Shifts in Recruiting during the 1980s, Altering the Composition of the Military: Reserve Mobilization and Conscription, and Should the Social Composition of the Military be a Concern?

  13. Phylogeography of mitochondrial DNA variation in brown bears and polar bears.

    Science.gov (United States)

    Shields, G F; Adams, D; Garner, G; Labelle, M; Pietsch, J; Ramsay, M; Schwartz, C; Titus, K; Williamson, S

    2000-05-01

    We analyzed 286 nucleotides of the middle portion of the mitochondrial cytochrome b gene of 61 brown bears from three locations in Alaska and 55 polar bears from Arctic Canada and Arctic Siberia to test our earlier observations of paraphyly between polar bears and brown bears as well as to test the extreme uniqueness of mitochondrial DNA types of brown bears on Admiralty, Baranof, and Chichagof (ABC) islands of southeastern Alaska. We also investigated the phylogeography of brown bears of Alaska's Kenai Peninsula in relation to other Alaskan brown bears because the former are being threatened by increased human development. We predicted that: (1) mtDNA paraphyly between brown bears and polar bears would be upheld, (2) the mtDNA uniqueness of brown bears of the ABC islands would be upheld, and (3) brown bears of the Kenai Peninsula would belong to either clade II or clade III of brown bears of our earlier studies of mtDNA. All of our predictions were upheld through the analysis of these additional samples. Copyright 2000 Academic Press.

  14. Phylogeography of mitochondrial DNA variation in brown bears and polar bears

    Science.gov (United States)

    Shields, Gerald F.; Adams, Deborah; Garner, Gerald W.; Labelle, Martine; Pietsch, Jacy; Ramsay, Malcolm; Schwartz, Charles; Titus, Kimberly; Williamson, Scott

    2000-01-01

    We analyzed 286 nucleotides of the middle portion of the mitochondrial cytochrome b gene of 61 brown bears from three locations in Alaska and 55 polar bears from Arctic Canada and Arctic Siberia to test our earlier observations of paraphyly between polar bears and brown bears as well as to test the extreme uniqueness of mitochondrial DNA types of brown bears on Admiralty, Baranof, and Chichagof (ABC) islands of southeastern Alaska. We also investigated the phylogeography of brown bears of Alaska's Kenai Peninsula in relation to other Alaskan brown bears because the former are being threatened by increased human development. We predicted that: (1) mtDNA paraphyly between brown bears and polar bears would be upheld, (2) the mtDNA uniqueness of brown bears of the ABC islands would be upheld, and (3) brown bears of the Kenai Peninsula would belong to either clade II or clade III of brown bears of our earlier studies of mtDNA. All of our predictions were upheld through the analysis of these additional samples.

  15. Parental Kidnaping and Child Support. Hearing before the Subcommittee on Juvenile Justice of the Committee on the Judiciary. United States Senate, Ninety-Ninth Congress, First Session on Problems of Domestic and International Kidnaping and Child Support Enforcement (July 19, 1985).

    Science.gov (United States)

    Congress of the U.S., Washington, DC. Senate Committee on the Judiciary.

    This document presents witness testimonies and prepared statements from the Senate hearing on parental kidnapping and child support. Opening statements are included from Senators Arlen Specter and Mich McConnell. Rebecca Hickman testifies about her experience when her daughter was abducted by the noncustodial father and taken to Iran. Hickman asks…

  16. Introgressive hybridization: brown bears as vectors for polar bear alleles.

    Science.gov (United States)

    Hailer, Frank

    2015-03-01

    The dynamics and consequences of introgression can inform about numerous evolutionary processes. Biologists have therefore long been interested in hybridization. One challenge, however, lies in the identification of nonadmixed genotypes that can serve as a baseline for accurate quantification of admixture. In this issue of Molecular Ecology, Cahill et al. (2015) analyse a genomic data set of 28 polar bears, eight brown bears and one American black bear. Polar bear alleles are found to be introgressed into brown bears not only near a previously identified admixture zone on the Alaskan Admiralty, Baranof and Chichagof (ABC) Islands, but also far into the North American mainland. Elegantly contrasting admixture levels at autosomal and X chromosomal markers, Cahill and colleagues infer that male-biased dispersal has spread these introgressed alleles away from the Late Pleistocene contact zone. Compared to a previous study on the ABC Island population in which an Alaskan brown bear served as a putatively admixture-free reference, Cahill et al. (2015) utilize a newly sequenced Swedish brown bear as admixture baseline. This approach reveals that brown bears have been impacted by introgression from polar bears to a larger extent (up to 8.8% of their genome), than previously known, including the bear that had previously served as admixture baseline. No evidence for introgression of brown bear into polar bear is found, which the authors argue could be a consequence of selection. Besides adding new exciting pieces to the puzzle of polar/brown bear evolutionary history, the study by Cahill and colleagues highlights that wildlife genomics is moving from analysing single genomes towards a landscape genomics approach. © 2015 John Wiley & Sons Ltd.

  17. Testimonies of precognition and encounters with psychiatry in letters to J. B. Priestley.

    Science.gov (United States)

    Price, Katy

    2014-12-01

    Using letters sent to British playwright J. B. Priestley in 1963, this paper explores the intersection between patient-focused history of psychiatry and the history of parapsychology in everyday life. Priestley's study of precognition lay outside the main currents of parapsychology, and his status as a storyteller encouraged confidences about anomalous temporal experience and mental illness. Drawing on virtue epistemology, I explore the regulation of subjectivity operated by Priestley in establishing the credibility of his correspondents in relation to their gender and mental health, and investigate the possibility of testimonial justice for these witnesses. Priestley's ambivalent approach to madness in relation to visions of the future is related to the longer history of prophecy and madness. Letters from the television audience reveal a variety of attitudes towards the compatibility of precognition with modern theories of the mind, show the flexibility of precognition in relation to mental distress, and record a range of responses from medical and therapeutic practitioners. Testimonial justice for those whose experience of precognition intersects with psychiatric care entails a full acknowledgement of the tensions and complicities between these two domains as they are experienced by the witness, and an explicit statement of the hearer's orientation to those domains. Copyright © 2014 The Author. Published by Elsevier Ltd.. All rights reserved.

  18. EcoBears

    DEFF Research Database (Denmark)

    Nielsen, Nick; Pedersen, Sandra Bleuenn; Sørensen, Jens Ager

    2015-01-01

    In this paper, we introduce the EcoBears concept that aims to augment household appliances with functional and aesthetic features to promote their "use'' and "longevity of use'' to prevent their disposal. The EcoBears also aim to support the communication of environmental issues in the home setting....... We present our initial design and implementation of the EcoBears that consist of two bear modules (a mother and her cub). We also present our preliminary concept validations and lessons learned to be considered for future directions....

  19. Posthumous Testimony for Dr. Leo Gross and his Family / Restoration of the 'Lost' Biography of a Physician Victim of the Holocaust

    Science.gov (United States)

    Hildebrandt, Sabine; Von Villiez, Anna; Seidelman, William E

    At a time when the last direct witnesses of the Holocaust are passing, new approaches to the restoration of 'lost' biographies of victims need to be considered. This investigation describes the potential of an international collaboration including surviving family members. Archival documents discovered in Jerusalem in 1983 concerned a discussion on the cancellation of a medical licence for a German Jewish physician, Dr. Leo Gross of Kolberg, who had been disenfranchised from medical practice under Nazi law. After applying for a medical licence during a 1935 visit to Palestine, Gross remigrated to Germany, where he was imprisoned in a concentration camp. No further information was found until 2014, when a group of scholars linked a variety of archival and internet-accessible sources and located a nephew of Gross. The nephew's testimony, cross-referenced against data from other sources, enabled the reconstruction of the 'lost' biography of his uncle and family, in fact a posthumous testimony. The resulting narrative places Dr. Leo Gross within his professional and social network, and serves his commemoration within this context of family and community. The restored biography of Dr. Leo Gross presents an exemplary case study for the future of Holocaust testimony.

  20. Phyllosilicate weathering pathways in chlorite-talc bearing soil parent materials, D.R. Congo: early findings.

    Science.gov (United States)

    Dumon, Mathijs; Oostermeyer, Fran; Timmermans, Els; De Meulemeester, Aschwin; Mees, Florias; Van Driessche, Isabel; Erens, Hans; Bazirake Mujinya, Basile; Van Ranst, Eric

    2015-04-01

    The study of the formation and transformation of clay minerals is of the upmost importance to understand soil formation and to adjust land-use management to the land surface conditions. These clay minerals determine to a large extent the soil physical and chemical properties. It is commonly observed that over time the mineralogy of any parent material is transformed to a simple assemblage composed mostly of Al and Fe oxides and low-activity clays, e.g. kaolinite. This is especially obvious in the humid tropics, which have been protected from glacial erosion, allowing deep, highly weathered soils to form. Despite the abundant presence of kaolinite in these soils, its formation pathways are still under debate: either neoformation by dissolution-crystallisation reactions or solid-state transformation of 2:1 phyllosilicates. To elucidate this, weathering sequences in a unique 40 m core taken below a termite mound, reaching a talc-chlorite bearing substrate in the Lubumbashi area, Katanga, DR Congo are being investigated in detail using a.o. quantitative X-ray diffraction analysis, chemical characterization, micromorphology and µXRF-scanning with the main objective to improve the understanding of the formation pathways of kaolinite subgroup minerals in humid tropical environments. Based on an initial characterization of the core, two zones of interest were selected for more detailed analysis, for which the early findings will be presented. The first zone extends from ca. 9 m to 11 m below the surface is dominated by kaolinite but shows early traces of primary talc and micas. The second zone extends from 34 to 36 m below the surface and contains large amounts of chlorite, with smaller amounts of talc, micas and kaolinite.

  1. Stable isotopes to detect food-conditioned bears and to evaluate human-bear management

    Science.gov (United States)

    Hopkins, John B.; Koch, Paul L.; Schwartz, Charles C.; Ferguson, Jake M.; Greenleaf, Schuyler S.; Kalinowski, Steven T.

    2012-01-01

    We used genetic and stable isotope analysis of hair from free-ranging black bears (Ursus americanus) in Yosemite National Park, California, USA to: 1) identify bears that consume human food, 2) estimate the diets of these bears, and 3) evaluate the Yosemite human–bear management program. Specifically, we analyzed the isotopic composition of hair from bears known a priori to be food-conditioned or non-food-conditioned and used these data to predict whether bears with an unknown management status were food-conditioned (FC) or non-food-conditioned (NFC). We used a stable isotope mixing model to estimate the proportional contribution of natural foods (plants and animals) versus human food in the diets of FC bears. We then used results from both analyses to evaluate proactive (population-level) and reactive (individual-level) human–bear management, and discussed new metrics to evaluate the overall human–bear management program in Yosemite. Our results indicated that 19 out of 145 (13%) unknown bears sampled from 2005 to 2007 were food-conditioned. The proportion of human food in the diets of known FC bears likely declined from 2001–2003 to 2005–2007, suggesting proactive management was successful in reducing the amount of human food available to bears. In contrast, reactive management was not successful in changing the management status of known FC bears to NFC bears, or in reducing the contribution of human food to the diets of FC bears. Nine known FC bears were recaptured on 14 occasions from 2001 to 2007; all bears were classified as FC during subsequent recaptures, and human–bear management did not reduce the amount of human food in the diets of FC bears. Based on our results, we suggest Yosemite continue implementing proactive human–bear management, reevaluate reactive management, and consider removing problem bears (those involved in repeated bear incidents) from the population.

  2. State Space Formulation of Nonlinear Vibration Responses Collected from a Dynamic Rotor-Bearing System: An Extension of Bearing Diagnostics to Bearing Prognostics.

    Science.gov (United States)

    Tse, Peter W; Wang, Dong

    2017-02-14

    Bearings are widely used in various industries to support rotating shafts. Their failures accelerate failures of other adjacent components and may cause unexpected machine breakdowns. In recent years, nonlinear vibration responses collected from a dynamic rotor-bearing system have been widely analyzed for bearing diagnostics. Numerous methods have been proposed to identify different bearing faults. However, these methods are unable to predict the future health conditions of bearings. To extend bearing diagnostics to bearing prognostics, this paper reports the design of a state space formulation of nonlinear vibration responses collected from a dynamic rotor-bearing system in order to intelligently predict bearing remaining useful life (RUL). Firstly, analyses of nonlinear vibration responses were conducted to construct a bearing health indicator (BHI) so as to assess the current bearing health condition. Secondly, a state space model of the BHI was developed to mathematically track the health evolution of the BHI. Thirdly, unscented particle filtering was used to predict bearing RUL. Lastly, a new bearing acceleration life testing setup was designed to collect natural bearing degradation data, which were used to validate the effectiveness of the proposed bearing prognostic method. Results show that the prediction accuracy of the proposed bearing prognostic method is promising and the proposed bearing prognostic method is able to reflect future bearing health conditions.

  3. State Space Formulation of Nonlinear Vibration Responses Collected from a Dynamic Rotor-Bearing System: An Extension of Bearing Diagnostics to Bearing Prognostics

    Directory of Open Access Journals (Sweden)

    Peter W. Tse

    2017-02-01

    Full Text Available Bearings are widely used in various industries to support rotating shafts. Their failures accelerate failures of other adjacent components and may cause unexpected machine breakdowns. In recent years, nonlinear vibration responses collected from a dynamic rotor-bearing system have been widely analyzed for bearing diagnostics. Numerous methods have been proposed to identify different bearing faults. However, these methods are unable to predict the future health conditions of bearings. To extend bearing diagnostics to bearing prognostics, this paper reports the design of a state space formulation of nonlinear vibration responses collected from a dynamic rotor-bearing system in order to intelligently predict bearing remaining useful life (RUL. Firstly, analyses of nonlinear vibration responses were conducted to construct a bearing health indicator (BHI so as to assess the current bearing health condition. Secondly, a state space model of the BHI was developed to mathematically track the health evolution of the BHI. Thirdly, unscented particle filtering was used to predict bearing RUL. Lastly, a new bearing acceleration life testing setup was designed to collect natural bearing degradation data, which were used to validate the effectiveness of the proposed bearing prognostic method. Results show that the prediction accuracy of the proposed bearing prognostic method is promising and the proposed bearing prognostic method is able to reflect future bearing health conditions.

  4. Archiveras anarquistas: Corporal Testimony in the Work of Diamela Eltit

    Directory of Open Access Journals (Sweden)

    Megan Corbin

    2013-04-01

    Full Text Available Abstract: There exists a constant within the trajectory of Diamela Eltit’s contributions to New Chilean Fiction: the turn to the body’s revelatory capacity as a corporal archive of human existence. Simultaneously exploring and rejecting the confines of the traditional testimonial reliance on language, Eltit moves the reader to a re-consideration of the truth-telling function of the biological materiality of the body, placing imperfect corporalities on display as a means of speaking, even where the voice itself may falter.  This essay locates Eltit’s move to the corporal within the trajectory of feminist criticism, the traumatic realities of the Chilean dictatorship and post-dictatorship periods, and the search for the recuperation of those bodily knowledges represented by the disappeared.  Next, it turns to Eltit’s Impuesto a la carne as her most recent re-visioning of the importance of corporal textualities, whether or not the subject-matter of the body’s denunciation is connected to the dictatorship.  Lastly, this essay reconsiders the rejective power of the traditional archive, analyzing the effect set models have on those who seek to tell their stories outside of the traditional testimonial model. I argue that the case of Diamela Eltit is an example of the way writers and producers of cultural texts which actively inscribe alternative memories of the past are resisting the authoritative power of the archive and subversively inscribing narrative memory onto bodily materialities, re-orienting the view of the corporal from an evidentiary showing to an active process of re-telling the past. Eltit’s novels, inscribed with her corporal textual model, give voice to survivors, articulating an alternate historical model for the archive, embracing the biological and making it speak against the rigid abuses of authoritarianism.

  5. Bleeding Mud: The Testimonial Poetry of Hurricane Mitch in Nicaragua

    Directory of Open Access Journals (Sweden)

    Erin S Finzer

    2015-01-01

    Full Text Available Beginning with Rubén Darío, Nicaragua has long prided itself in being a country of poets. During the Sandinista Revolution, popular poetry workshops dispatched by Minister of Culture Ernesto Cardenal taught peasants and soldiers to write poetry about everyday life and to use poetry as a way to work through trauma from the civil war. When Hurricane Mitch--one of the first superstorms that heralded climate change--brought extreme flooding to Nicaragua in 1998, poetry again served as a way for victims to process the devastation. Examining testimonial poetry from Hurricane Mitch, this article shows how the mud and despair of this environmental disaster function as palimpsests of conquest and imperial oppression.

  6. Comparison of Alignment Correction Angles Between Fixed-Bearing and Mobile-Bearing UKA.

    Science.gov (United States)

    Inoue, Atsuo; Arai, Yuji; Nakagawa, Shuji; Inoue, Hiroaki; Yamazoe, Shoichi; Kubo, Toshikazu

    2016-01-01

    Good outcomes have been reported with both fixed-bearing and mobile-bearing unicompartmental knee arthroplasty (UKA). However, overcorrected alignment could induce the progression of arthritis on the non-arthroplasty side. Changes of limb alignment after UKA with both types of bearings (fixed bearing: 24 knees, mobile bearing: 28 knees) were investigated. The mean difference between the preoperative standing femoral-tibial angle (FTA) and postoperative standing FTA was significantly larger in mobile bearing UKA group. In fixed-bearing UKA, there must be some laxity in MCL tension so that a 2-mm tension gauge can be inserted. In mobile-bearing UKA, appropriate MCL tension is needed to prevent bearing dislocation. This difference in MCL tension may have caused the difference in the correction angle between the groups. Copyright © 2016 Elsevier Inc. All rights reserved.

  7. Human Papillomavirus (HPV) Vaccination Motivators, Barriers, and Brochure Preferences Among Parents in Multicultural Hawai'i: a Qualitative Study.

    Science.gov (United States)

    Dela Cruz, May Rose Isnec; Tsark, Jo Ann Umilani; Chen, John Jiangtian; Albright, Cheryl Lynn; Braun, Kathryn Lenzner

    2017-09-01

    The human papillomavirus (HPV) vaccine can prevent cervical and other cancers. Unfortunately, according to the National Immunization Survey-Teen 2014 data, completion of the HPV vaccine was only 38 % for 13- to 17-year-old girls and 31 % for 13- to17-year-old boys in the USA, and prevalence was similar in Hawai'i. Parents' acceptability of the HPV vaccine is critical for the vaccine uptake, and this can be increased by educational materials and interventions. However, HPV materials are not widely distributed in Hawai'i. The purpose of this qualitative study was to identify HPV vaccination barriers, motivators, and brochure preferences among parents of teens in multicultural Hawai'i. Twenty parents were interviewed in person or by telephone. Four major themes emerged: (1) the physician is critical in the decision to vaccinate, (2) parental perception of the child's sexual activity guides the timing of their willingness to vaccinate, (3) HPV health education materials should be provided and discussed by the physician, and (4) parents would prefer an educational brochure that features local faces and testimonials, includes an immunization chart, and addresses barriers to vaccination. These findings informed the development of HPV health education materials tailored to Asian Americans and Pacific Islanders in Hawai'i.

  8. A review of bear farming and bear trade in Lao People's Democratic Republic

    Directory of Open Access Journals (Sweden)

    E. Livingstone

    2018-01-01

    Full Text Available This study reviews the bear farming industry in Lao PDR with the objective of documenting the current number of commercial bear facilities (i.e. captive bear facilities judged to be trading in bear bile and/or bears and bear parts and the number of bears contained within these facilities, noting changes since it was last examined between 2000 and 2012 by Livingstone and Shepherd (2014. We surveyed all known commercial bear facilities and searched for previously unrecorded facilities. We compared our records with Livingstone and Shepherd (2014 and corrected some duplicate records from their study. In 2017, we recorded seven commercial facilities; four dedicated bear farms, and three tiger farms that were reportedly also keeping bears. We found that between 2012 and 2017 the recorded number of dedicated bear farms reduced by two, and the recorded number of tiger farms also keeping bears increased by one. Within the same period, the total number of captive bears among all facilities in Lao PDR hardly changed (+one, but the number of bears within each facility did. The northern facilities, owned by ethnic Chinese, have expanded since 2012, and central and southern facilities have downsized or closed. While bear farming appears to be downsizing in Lao PDR overall, efforts to phase it out are undermined by the expansion of foreign owned facilities in the north, within Special and Specific Economic Zones that largely cater to a Chinese market, and where the Lao government's efforts to enforce laws and protect wildlife appear to be lacking. Closing the facilities in the north will require political will and decisive law enforcement. Keywords: Bear farms, Bear bile, Gall bladder, Urso-deoxycholic acid, Bear bile extraction facilities, Lao PDR, Ursus thibetanus

  9. Molecular phylogeny and SNP variation of polar bears (Ursus maritimus), brown bears (U. arctos), and black bears (U. americanus) derived from genome sequences.

    Science.gov (United States)

    Cronin, Matthew A; Rincon, Gonzalo; Meredith, Robert W; MacNeil, Michael D; Islas-Trejo, Alma; Cánovas, Angela; Medrano, Juan F

    2014-01-01

    We assessed the relationships of polar bears (Ursus maritimus), brown bears (U. arctos), and black bears (U. americanus) with high throughput genomic sequencing data with an average coverage of 25× for each species. A total of 1.4 billion 100-bp paired-end reads were assembled using the polar bear and annotated giant panda (Ailuropoda melanoleuca) genome sequences as references. We identified 13.8 million single nucleotide polymorphisms (SNP) in the 3 species aligned to the polar bear genome. These data indicate that polar bears and brown bears share more SNP with each other than either does with black bears. Concatenation and coalescence-based analysis of consensus sequences of approximately 1 million base pairs of ultraconserved elements in the nuclear genome resulted in a phylogeny with black bears as the sister group to brown and polar bears, and all brown bears are in a separate clade from polar bears. Genotypes for 162 SNP loci of 336 bears from Alaska and Montana showed that the species are genetically differentiated and there is geographic population structure of brown and black bears but not polar bears.

  10. Teddy Bear Stories

    DEFF Research Database (Denmark)

    van Leeuwen, Theo; Caldas-Coulthardt, Carmen

    2014-01-01

    This paper presents a semiotic analysis of a key cultural artefact, the teddy bear. After introducing the iconography of the teddy bear, it analyses different kinds of stories to show how teddy bears are endowed with meaning in everyday life: stories from children's books, reminiscenses by adults...... bears have traditionally centred on interpersonal relations within the nuclear family, but have recently been institutionalized and commercialized....

  11. Density, distribution, and genetic structure of grizzly bears in the Cabinet-Yaak Ecosystem

    Science.gov (United States)

    Macleod, Amy C.; Boyd, Kristina L.; Boulanger, John; Royle, J. Andrew; Kasworm, Wayne F.; Paetkau, David; Proctor, Michael F.; Annis, Kim; Graves, Tabitha A.

    2016-01-01

    The conservation status of the 2 threatened grizzly bear (Ursus arctos) populations in the Cabinet-Yaak Ecosystem (CYE) of northern Montana and Idaho had remained unchanged since designation in 1975; however, the current demographic status of these populations was uncertain. No rigorous data on population density and distribution or analysis of recent population genetic structure were available to measure the effectiveness of conservation efforts. We used genetic detection data from hair corral, bear rub, and opportunistic sampling in traditional and spatial capture–recapture models to generate estimates of abundance and density of grizzly bears in the CYE. We calculated mean bear residency on our sampling grid from telemetry data using Huggins and Pledger models to estimate the average number of bears present and to correct our superpopulation estimates for lack of geographic closure. Estimated grizzly bear abundance (all sex and age classes) in the CYE in 2012 was 48–50 bears, approximately half the population recovery goal. Grizzly bear density in the CYE (4.3–4.5 grizzly bears/1,000 km2) was among the lowest of interior North American populations. The sizes of the Cabinet (n = 22–24) and Yaak (n = 18–22) populations were similar. Spatial models produced similar estimates of abundance and density with comparable precision without requiring radio-telemetry data to address assumptions of geographic closure. The 2 populations in the CYE were demographically and reproductively isolated from each other and the Cabinet population was highly inbred. With parentage analysis, we documented natural migrants to the Cabinet and Yaak populations by bears born to parents in the Selkirk and Northern Continental Divide populations. These events supported data from other sources suggesting that the expansion of neighboring populations may eventually help sustain the CYE populations. However, the small size, isolation, and inbreeding documented by this study

  12. Bear-ly” learning: Limits of abstraction in black bear cognition

    Directory of Open Access Journals (Sweden)

    Jennifer Vonk

    2018-02-01

    Full Text Available We presented two American black bears (Ursus americanus with a serial list learning memory task, and one of the bears with a matching-to-sample task. After extended training, both bears demonstrated some success with the memory task but failed to generalize the overarching rule of the task to novel stimuli. Matching to sample proved even more difficult for our bear to learn. We conclude that, despite previous success in training bears to respond to natural categories, quantity discriminations, and other related tasks, that bears may possess a cognitive limitation with regards to learning abstract rules. Future tests using different procedures are necessary to determine whether this is a limit of bears’ cognitive capacities, or a limitation of the current tasks as presented. Future tests should present a larger number of varying stimuli. Ideally, bears of various species should be tested on these tasks to demonstrate species as well as individual differences.

  13. GAS BEARING

    Science.gov (United States)

    Skarstrom, C.W.

    1960-09-01

    A gas lubricated bearing for a rotating shaft is described. The assembly comprises a stationary collar having an annular member resiliently supported thereon. The collar and annular member are provided with cooperating gas passages arranged for admission of pressurized gas which supports and lubricates a bearing block fixed to the rotatable shaft. The resilient means for the annular member support the latter against movement away from the bearing block when the assembly is in operation.

  14. Genomic evidence of geographically widespread effect of gene flow from polar bears into brown bears.

    Science.gov (United States)

    Cahill, James A; Stirling, Ian; Kistler, Logan; Salamzade, Rauf; Ersmark, Erik; Fulton, Tara L; Stiller, Mathias; Green, Richard E; Shapiro, Beth

    2015-03-01

    Polar bears are an arctic, marine adapted species that is closely related to brown bears. Genome analyses have shown that polar bears are distinct and genetically homogeneous in comparison to brown bears. However, these analyses have also revealed a remarkable episode of polar bear gene flow into the population of brown bears that colonized the Admiralty, Baranof and Chichagof islands (ABC islands) of Alaska. Here, we present an analysis of data from a large panel of polar bear and brown bear genomes that includes brown bears from the ABC islands, the Alaskan mainland and Europe. Our results provide clear evidence that gene flow between the two species had a geographically wide impact, with polar bear DNA found within the genomes of brown bears living both on the ABC islands and in the Alaskan mainland. Intriguingly, while brown bear genomes contain up to 8.8% polar bear ancestry, polar bear genomes appear to be devoid of brown bear ancestry, suggesting the presence of a barrier to gene flow in that direction. © 2014 The Authors. Molecular Ecology Published by John Wiley & Sons Ltd.

  15. EFFECT OF CLEARANCE THE BALL BEARINGS ON INCORRECT WORK OF THREE-SUPORT BEARING SHAFT

    Directory of Open Access Journals (Sweden)

    Jarosław KACZOR

    2014-06-01

    Full Text Available Durability deep groove ball bearings depends on factors (called attributes design, technological and operational. Among the design features one of the most important is play in the bearings. Polish Norm shows five groups of looseness in the bearings, in which the play range from 0 to 105 microns. Manufacturers of rolling bearings they only play group, which has a bearing data, without giving the exact value of the slack. Aim of this study is to determine how it affects the play in the bearings to work three-bearing shafts, including elasticity and resilience three-bearing shafts.

  16. Geology and geomorphology of Bear Lake Valley and upper Bear River, Utah and Idaho

    Science.gov (United States)

    Reheis, M.C.; Laabs, B.J.C.; Kaufman, D.S.

    2009-01-01

    Bear Lake, on the Idaho-Utah border, lies in a fault-bounded valley through which the Bear River flows en route to the Great Salt Lake. Surficial deposits in the Bear Lake drainage basin provide a geologic context for interpretation of cores from Bear Lake deposits. In addition to groundwater discharge, Bear Lake received water and sediment from its own small drainage basin and sometimes from the Bear River and its glaciated headwaters. The lake basin interacts with the river in complex ways that are modulated by climatically induced lake-level changes, by the distribution of active Quaternary faults, and by the migration of the river across its fluvial fan north of the present lake. The upper Bear River flows northward for ???150 km from its headwaters in the northwestern Uinta Mountains, generally following the strike of regional Laramide and late Cenozoic structures. These structures likely also control the flow paths of groundwater that feeds Bear Lake, and groundwater-fed streams are the largest source of water when the lake is isolated from the Bear River. The present configuration of the Bear River with respect to Bear Lake Valley may not have been established until the late Pliocene. The absence of Uinta Range-derived quartzites in fluvial gravel on the crest of the Bear Lake Plateau east of Bear Lake suggests that the present headwaters were not part of the drainage basin in the late Tertiary. Newly mapped glacial deposits in the Bear River Range west of Bear Lake indicate several advances of valley glaciers that were probably coeval with glaciations in the Uinta Mountains. Much of the meltwater from these glaciers may have reached Bear Lake via groundwater pathways through infiltration in the karst terrain of the Bear River Range. At times during the Pleistocene, the Bear River flowed into Bear Lake and water level rose to the valley threshold at Nounan narrows. This threshold has been modified by aggradation, downcutting, and tectonics. Maximum lake

  17. Using a Health Message with a Testimonial to Motivate Colon Cancer Screening: Associations with Perceived Identification and Vividness

    Science.gov (United States)

    Dillard, Amanda J.; Main, Jackie L.

    2013-01-01

    Research suggests that testimonials, or first-person narratives, influence health behavior and health-related decision making, but few studies have examined conceptual factors that may be responsible for these effects. In the current study, older adults who were due for colorectal cancer screening read a message about screening that included a…

  18. State Space Formulation of Nonlinear Vibration Responses Collected from a Dynamic Rotor-Bearing System: An Extension of Bearing Diagnostics to Bearing Prognostics

    OpenAIRE

    Peter W. Tse; Dong Wang

    2017-01-01

    Bearings are widely used in various industries to support rotating shafts. Their failures accelerate failures of other adjacent components and may cause unexpected machine breakdowns. In recent years, nonlinear vibration responses collected from a dynamic rotor-bearing system have been widely analyzed for bearing diagnostics. Numerous methods have been proposed to identify different bearing faults. However, these methods are unable to predict the future health conditions of bearings. To exten...

  19. Evaluation of bearing configurations using the single bearing tester in liquid nitrogen

    Science.gov (United States)

    Jett, T.; Hall, P.; Thom, R.

    1991-01-01

    Various bearing configurations were tested using the Marshall Space Flight Center single bearing tester with LN2 as the cryogenic coolant. The baseline was one Rocketdyne phase one high pressure oxidizer turbopump (HPOTP) pump end 45-mm bore bearing. The bearing configurations that were tested included a Salox/M cage configuration, a silicon nitride ball configuration, an elongated cage configuration, and a Bray 601 grease configuration.

  20. Cultivating Opportunity Amid Crisis: Using Video-Based Assessment and Feedback to Support Parent-Child Relationships in Child Welfare

    Science.gov (United States)

    Barron, Carla C.; Stacks, Ann M.; Rodgers, Andrea; Fox, Kate

    2017-01-01

    Infants, toddlers, and young children have unique needs when separated from their primary caregivers because of child abuse and neglect. Parents of these children often have their own histories of abuse and neglect and can benefit from assessments and interventions that bear in mind the effect caregiving histories have on present parenting. This…

  1. Improvement of journal bearing operation at heavy misalignment using bearing flexibility and compliant liners

    DEFF Research Database (Denmark)

    Thomsen, Kim; Klit, Peder

    2012-01-01

    A flexure journal bearing design is proposed that will improve operational behaviour of a journal bearing at pronounced misalignment. Using a thermoelastohydrodynamic model, it is shown that the proposed flexure journal bearing has vastly increased the hydrodynamic performance compared to the stiff...... bearing when misaligned. The hydrodynamic performance is evaluated on lubricant film thickness, pressure and temperature. Furthermore, the influence of a compliant bearing liner is investigated and it is found that it increases the hydrodynamic performance when applied to a stiff bearing, whereas...... the liner has practically no influence on the flexure journal bearing's performance....

  2. A testimony to Muzil: Hervé Guibert, Foucault, and the medical gaze.

    Science.gov (United States)

    Rendell, Joanne

    2004-01-01

    Testimony to Muzil: Hervé Guibert, Michel Foucault, and the "Medical Gaze" examines the fictional/autobiographical AIDS writings of the French writer Hervé Guibert. Locating Guibert's writings alongside the work of his friend Michel Foucault, the article explores how they echo Foucault's evolving notions of the "medical gaze." The article also explores how Guilbert's narrators and Guibert himself (as writer) resist and challenge the medical gaze; a gaze which particularly in the era of AIDS has subjected, objectified, and even sometimes punished the body of the gay man. It is argued that these resistances to the gaze offer a literary extension to Foucault's later work on power and resistance strategies.

  3. Nuclear genomic sequences reveal that polar bears are an old and distinct bear lineage.

    Science.gov (United States)

    Hailer, Frank; Kutschera, Verena E; Hallström, Björn M; Klassert, Denise; Fain, Steven R; Leonard, Jennifer A; Arnason, Ulfur; Janke, Axel

    2012-04-20

    Recent studies have shown that the polar bear matriline (mitochondrial DNA) evolved from a brown bear lineage since the late Pleistocene, potentially indicating rapid speciation and adaption to arctic conditions. Here, we present a high-resolution data set from multiple independent loci across the nuclear genomes of a broad sample of polar, brown, and black bears. Bayesian coalescent analyses place polar bears outside the brown bear clade and date the divergence much earlier, in the middle Pleistocene, about 600 (338 to 934) thousand years ago. This provides more time for polar bear evolution and confirms previous suggestions that polar bears carry introgressed brown bear mitochondrial DNA due to past hybridization. Our results highlight that multilocus genomic analyses are crucial for an accurate understanding of evolutionary history.

  4. Vibration model of rolling element bearings in a rotor-bearing system for fault diagnosis

    Science.gov (United States)

    Cong, Feiyun; Chen, Jin; Dong, Guangming; Pecht, Michael

    2013-04-01

    Rolling element bearing faults are among the main causes of breakdown in rotating machines. In this paper, a rolling bearing fault model is proposed based on the dynamic load analysis of a rotor-bearing system. The rotor impact factor is taken into consideration in the rolling bearing fault signal model. The defect load on the surface of the bearing is divided into two parts, the alternate load and the determinate load. The vibration response of the proposed fault signal model is investigated and the fault signal calculating equation is derived through dynamic and kinematic analysis. Outer race and inner race fault simulations are realized in the paper. The simulation process includes consideration of several parameters, such as the gravity of the rotor-bearing system, the imbalance of the rotor, and the location of the defect on the surface. The simulation results show that different amplitude contributions of the alternate load and determinate load will cause different envelope spectrum expressions. The rotating frequency sidebands will occur in the envelope spectrum in addition to the fault characteristic frequency. This appearance of sidebands will increase the difficulty of fault recognition in intelligent fault diagnosis. The experiments given in the paper have successfully verified the proposed signal model simulation results. The test rig design of the rotor bearing system simulated several operating conditions: (1) rotor bearing only; (2) rotor bearing with loader added; (3) rotor bearing with loader and rotor disk; and (4) bearing fault simulation without rotor influence. The results of the experiments have verified that the proposed rolling bearing signal model is important to the rolling bearing fault diagnosis of rotor-bearing systems.

  5. Polar bears at risk

    Energy Technology Data Exchange (ETDEWEB)

    Norris, S.; Rosentrater, L.; Eid, P.M. [WWF International Arctic Programme, Oslo (Norway)

    2002-05-01

    Polar bears, the world's largest terrestrial carnivore, spend much of their lives on the arctic sea ice. This is where they hunt and move between feeding, denning, and resting areas. The world population, estimated at 22,000 bears, is made up of 20 relatively distinct populations varying in size from a few hundred to a few thousand animals. About 60 per cent of all polar bears are found in Canada. In general, the status of this species is stable, although there are pronounced differences between populations. Reductions in the extent and thickness of sea ice has lead the IUCN Polar Bear Specialist Group to describe climate change as one of the major threats facing polar bears today. Though the long-term effects of climate change will vary in different areas of the Arctic, impacts on the condition and reproductive success of polar bears and their prey are likely to be negative. Longer ice-free periods resulting from earlier break-up of sea ice in the spring and later formation in the fall is already impacting polar bears in the southern portions of their range. In Canada's Hudson Bay, for example, bears hunt on the ice through the winter and into early summer, after which the ice melts completely, forcing bears ashore to fast on stored fat until freeze-up in the fall. The time bears have on the ice to hunt and build up their body condition is cut short when the ice melts early. Studies from Hudson Bay show that for every week earlier that ice break-up occurs, bears will come ashore 10 kg lighter and in poorer condition. It is likely that populations of polar bears dividing their time between land and sea will be severely reduced and local extinctions may occur as greenhouse gas emissions continue to rise and sea ice melts. Expected changes in regional weather patterns will also impact polar bears. Rain in the late winter can cause maternity dens to collapse before females and cubs have departed, thus exposing occupants to the elements and to predators. Such

  6. Transient Vibration Prediction for Rotors on Ball Bearings Using Load-dependent Non-linear Bearing Stiffness

    Science.gov (United States)

    Fleming, David P.; Poplawski, J. V.

    2002-01-01

    Rolling-element bearing forces vary nonlinearly with bearing deflection. Thus an accurate rotordynamic transient analysis requires bearing forces to be determined at each step of the transient solution. Analyses have been carried out to show the effect of accurate bearing transient forces (accounting for non-linear speed and load dependent bearing stiffness) as compared to conventional use of average rolling-element bearing stiffness. Bearing forces were calculated by COBRA-AHS (Computer Optimized Ball and Roller Bearing Analysis - Advanced High Speed) and supplied to the rotordynamics code ARDS (Analysis of Rotor Dynamic Systems) for accurate simulation of rotor transient behavior. COBRA-AHS is a fast-running 5 degree-of-freedom computer code able to calculate high speed rolling-element bearing load-displacement data for radial and angular contact ball bearings and also for cylindrical and tapered roller beatings. Results show that use of nonlinear bearing characteristics is essential for accurate prediction of rotordynamic behavior.

  7. Local Attitudes towards Bear Management after Illegal Feeding and Problem Bear Activity.

    Science.gov (United States)

    Dubois, Sara; Fraser, David

    2013-09-12

    The "pot bears" received international media attention in 2010 after police discovered the intentional feeding of over 20 black bears during the investigation of an alleged marijuana-growing operation in Christina Lake, British Columbia, Canada. A two-phase random digit dialing survey of the community was conducted in 2011 to understand local perspectives on bear policy and management, before and after a summer of problem bear activity and government interventions. Of the 159 households surveyed in February 2011, most had neutral or positive attitudes towards bears in general, and supported the initial decision to feed the food-conditioned bears until the autumn hibernation. In contrast to wildlife experts however, most participants supported relocating the problem bears, or allowing them to remain in the area, ahead of killing; in part this arose from notions of fairness despite the acknowledged problems of relocation. Most locals were aware of the years of feeding but did not report it, evidently failing to see it as a serious form of harm, even after many bears had been killed. This underscores the importance of preventive action on wildlife feeding and the need to narrow the gap between public and expert opinion on the likely effects of relocation versus killing.

  8. Integrating Postsecondary Education Interventions to Help Low-Income Students Succeed. Testimony of Alexander Mayer, Deputy Director, Postsecondary Education, MDRC, Before the California State Assembly Higher Education Committee and the Budget Subcommittee on Education Finance

    Science.gov (United States)

    Mayer, Alexander

    2018-01-01

    This document presents the testimony of MDRC's Alex Mayer, the Deputy Director for Postsecondary Education at MDRC. The three points that Alex Mayer emphasizes in this testimony before the California State Assembly Higher Education Committee and the Budget Subcommittee on Education Finance on integrating postsecondary education interventions to…

  9. Genetic relationships of extant brown bears (Ursus arctos) and polar bears (Ursus maritimus).

    Science.gov (United States)

    Cronin, Matthew A; MacNeil, Michael D

    2012-01-01

    Polar bears (Ursus maritimus) and brown bears (Ursus arctos) are closely related species for which extensive mitochondrial and nuclear phylogenetic comparisons have been made. We used previously published genotype data for 8 microsatellite DNA loci from 930 brown bears in 19 populations and 473 polar bears in 16 populations to compare the population genetic relationships of extant populations of the species. Genetic distances (Nei standard distance = 1.157), the proportion of private alleles (52% of alleles are not shared by the species), and Bayesian cluster analysis are consistent with morphological and life-history characteristics that distinguish polar bears and brown bears as different species with little or no gene flow among extant populations.

  10. R+D works for the further development of high temperature reactors. (1) Captive bearing experiments for active magnetic bearings. (2) Captive bearing test for HTR blowers

    International Nuclear Information System (INIS)

    1991-01-01

    When using active magnetic bearings as blower shaft bearings, blower motors and bearings must be protected against mechanical damage in case of faults (example: total electrical supply failure due to the supply cables breaking). So-called captive bearings are provided, in order to be able to shut the blowers down safely in such faults. These captive bearings are roller bearings which are additionally fitted in the area of the blower shaft bearings, to prevent mechanical contact between the blower rotor and stator. As there was little experience available for the given boundary conditions, such as - speed, - acceleration, - bearing load, - bearing dimensions, - ambient conditions, appropriate development and tests had to be carried out. It was important to determine suitable captive bearings and the necessary ambient conditions, which will make it possible to support the failures of the magnetic bearings to be expected in 40 years' operation of the reactor without damage and to meet the requirements of the captive bearings. (orig./GL) [de

  11. EFFECT OF BEARING MACROGEOMETRY ON BEARING PERFORMANCE IN ELASTOHYDRODYNAMIC LUBRICATION

    Directory of Open Access Journals (Sweden)

    Emin GÜLLÜ

    2000-01-01

    Full Text Available During manufacturing, ideal dimension and mutual positioning of machine elements proposed in project desing can be achieved only within certain range of tolerances. These tolerances, being classified in two groups, related to micro and macro geometry of machine elements, don't have to effect the functioning of these elements. So, as for all machine elements, investigation of the effects of macro and micro tolerances for journal bearings is important. In this study, we have investigated the effect of macro geometric irregularities of journal bearings on performance characteristics. In this regard, we have studied the change of bearing performance in respect to deviation from ideal circle for an elliptic shaft with small ovality rolling in circular journal bearing.

  12. Passive magnetic bearing configurations

    Science.gov (United States)

    Post, Richard F [Walnut Creek, CA

    2011-01-25

    A journal bearing provides vertical and radial stability to a rotor of a passive magnetic bearing system when the rotor is not rotating and when it is rotating. In the passive magnetic bearing system, the rotor has a vertical axis of rotation. Without the journal bearing, the rotor is vertically and radially unstable when stationary, and is vertically stable and radially unstable when rotating.

  13. Comparison of fixed-bearing and mobile-bearing total knee arthroplasty after high tibial osteotomy.

    Science.gov (United States)

    Hernigou, Philippe; Huys, Maxime; Pariat, Jacques; Roubineau, François; Flouzat Lachaniette, Charles Henri; Dubory, Arnaud

    2018-02-01

    There is no information comparing the results of fixed-bearing total knee replacement and mobile-bearing total knee replacement in the same patients previously treated by high tibial osteotomy. The purpose was therefore to compare fixed-bearing and mobile-bearing total knee replacements in patients treated with previous high tibial osteotomy. We compared the results of 57 patients with osteoarthritis who had received a fixed-bearing prosthesis after high tibial osteotomy with the results of 41 matched patients who had received a rotating platform after high tibial osteotomy. The match was made for length of follow-up period. The mean follow-up was 17 years (range, 15-20 years). The patients were assessed clinically and radiographically. The pre-operative knee scores had no statistically significant differences between the two groups. So was the case with the intra-operative releases, blood loss, thromboembolic complications and infection rates in either group. There was significant improvement in both groups of knees, and no significant difference was observed between the groups (i.e., fixed-bearing and mobile-bearing knees) for the mean Knee Society knee clinical score (95 and 92 points, respectively), or the Knee Society knee functional score (82 and 83 points, respectively) at the latest follow-up. However, the mean post-operative knee motion was higher for the fixed-bearing group (117° versus 110°). In the fixed-bearing group, one knee was revised because of periprosthetic fracture. In the rotating platform mobile-bearing group, one knee was revised because of aseptic loosening of the tibial component. The Kaplan-Meier survivorship for revision at ten years of follow-up was 95.2% for the fixed bearing prosthesis and 91.1% for the rotating platform mobile-bearing prosthesis. Although we did manage to detect significant differences mainly in clinical and radiographic results between the two groups, we found no superiority or inferiority of the mobile-bearing

  14. Hydrodynamic sliding bearings vs. roller bearings. Segmented sliding bearings for higher rotational speed; Hydrodynamische Gleitlager versus Waelzlager. Segmentgleitlager fuer hoehere Drehzahlen

    Energy Technology Data Exchange (ETDEWEB)

    Hagenhoff, M.; Sauer, M. [Main-Metall-Giesserei Fritz Schorr GmbH und Co. KG, Altenglan (Germany)

    2004-10-01

    Hydrodynamic sliding bearings are considered only in cases when roller bearings reach their speed limits and there is no other solution. However, this view neglects the fact that there are modern, optimised sliding bearings which have more advantages over roller bearings than should be expected. Many producers of sliding bearings also have computer programs enabling them to offer customised solutions, i.e. optimal adaptation of the bearings to their specific operating conditions. (orig.) [German] Hydrodynamische Gleitlager werden oft erst dann in Betracht gezogen, wenn man an die Drehzahlgrenzen von Waelzlagern stoesst und keine andere sinnvolle Alternative mehr in Frage kommt. Dabei uebersieht man leicht, dass es moderne, optimierte Gleitlagerkonstruktionen gibt, die weitaus haeufiger ihre Staerken im Vergleich zu Waelzlagern ausspielen koennen als zunaechst vermutet. Viele Gleitlagerhersteller haben zudem heute Berechnungsprogramme zur Verfuegung, die eine optimale Anpassung der Lager an die speziellen Betriebsbedingungen erlauben. (orig.)

  15. Genomic evidence of geographically widespread effect of gene flow from polar bears into brown bears

    OpenAIRE

    Cahill, James A; Stirling, Ian; Kistler, Logan; Salamzade, Rauf; Ersmark, Erik; Fulton, Tara L; Stiller, Mathias; Green, Richard E; Shapiro, Beth

    2015-01-01

    © 2014 The Authors. Molecular Ecology Published by John Wiley & Sons Ltd. Polar bears are an arctic, marine adapted species that is closely related to brown bears. Genome analyses have shown that polar bears are distinct and genetically homogeneous in comparison to brown bears. However, these analyses have also revealed a remarkable episode of polar bear gene flow into the population of brown bears that colonized the Admiralty, Baranof and Chichagof islands (ABC islands) of Alaska. Here, we...

  16. The role of human outdoor recreation in shaping patterns of grizzly bear-black bear co-occurrence.

    Directory of Open Access Journals (Sweden)

    Andrew Ladle

    Full Text Available Species' distributions are influenced by a combination of landscape variables and biotic interactions with other species, including people. Grizzly bears and black bears are sympatric, competing omnivores that also share habitats with human recreationists. By adapting models for multi-species occupancy analysis, we analyzed trail camera data from 192 trail camera locations in and around Jasper National Park, Canada to estimate grizzly bear and black bear occurrence and intensity of trail use. We documented (a occurrence of grizzly bears and black bears relative to habitat variables (b occurrence and intensity of use relative to competing bear species and motorised and non-motorised recreational activity, and (c temporal overlap in activity patterns among the two bear species and recreationists. Grizzly bears were spatially separated from black bears, selecting higher elevations and locations farther from roads. Both species co-occurred with motorised and non-motorised recreation, however, grizzly bears reduced their intensity of use of sites with motorised recreation present. Black bears showed higher temporal activity overlap with recreational activity than grizzly bears, however differences in bear daily activity patterns between sites with and without motorised and non-motorised recreation were not significant. Reduced intensity of use by grizzly bears of sites where motorised recreation was present is a concern given off-road recreation is becoming increasingly popular in North America, and can negatively influence grizzly bear recovery by reducing foraging opportunities near or on trails. Camera traps and multi-species occurrence models offer non-invasive methods for identifying how habitat use by animals changes relative to sympatric species, including humans. These conclusions emphasise the need for integrated land-use planning, access management, and grizzly bear conservation efforts to consider the implications of continued access for

  17. The role of human outdoor recreation in shaping patterns of grizzly bear-black bear co-occurrence.

    Science.gov (United States)

    Ladle, Andrew; Steenweg, Robin; Shepherd, Brenda; Boyce, Mark S

    2018-01-01

    Species' distributions are influenced by a combination of landscape variables and biotic interactions with other species, including people. Grizzly bears and black bears are sympatric, competing omnivores that also share habitats with human recreationists. By adapting models for multi-species occupancy analysis, we analyzed trail camera data from 192 trail camera locations in and around Jasper National Park, Canada to estimate grizzly bear and black bear occurrence and intensity of trail use. We documented (a) occurrence of grizzly bears and black bears relative to habitat variables (b) occurrence and intensity of use relative to competing bear species and motorised and non-motorised recreational activity, and (c) temporal overlap in activity patterns among the two bear species and recreationists. Grizzly bears were spatially separated from black bears, selecting higher elevations and locations farther from roads. Both species co-occurred with motorised and non-motorised recreation, however, grizzly bears reduced their intensity of use of sites with motorised recreation present. Black bears showed higher temporal activity overlap with recreational activity than grizzly bears, however differences in bear daily activity patterns between sites with and without motorised and non-motorised recreation were not significant. Reduced intensity of use by grizzly bears of sites where motorised recreation was present is a concern given off-road recreation is becoming increasingly popular in North America, and can negatively influence grizzly bear recovery by reducing foraging opportunities near or on trails. Camera traps and multi-species occurrence models offer non-invasive methods for identifying how habitat use by animals changes relative to sympatric species, including humans. These conclusions emphasise the need for integrated land-use planning, access management, and grizzly bear conservation efforts to consider the implications of continued access for motorised

  18. Memory and testimony in Primo Levi: the Babel of the concentration camps

    Directory of Open Access Journals (Sweden)

    María Coira

    2014-08-01

    Full Text Available Memory as a problem and the subject of theoretical inquiry, although early onset in civilization that we call western, has gained an important place in the concerns of historians, philosophers, psychologists, and literary critics, with all the ethical implications, political and aesthetic that entails. In this context, special dimensions such problematic charged when what is narrated, analyzes, represents or attempts to explain what are the collective traumatic events. In this paper, we focus on some aspects of testimonial texts and essays of Primo Levi (1919-1987, which estimates as unavoidable regarding the aforementioned issues. These texts are: Se questo è un uomo (1947, La tregua (1963 and I sommersi e i salvati (1986.

  19. Unbalance Response Prediction for Rotors on Ball Bearings Using Speed and Load Dependent Nonlinear Bearing Stiffness

    Science.gov (United States)

    Fleming, David P.; Poplawski, J. V.

    2003-01-01

    Rolling-element bearing forces vary nonlinearly with bearing deflection. Thus an accurate rotordynamic analysis requires that bearing forces corresponding to the actual bearing deflection be utilized. For this work bearing forces were calculated by COBRA-AHS, a recently developed rolling-element bearing analysis code. Bearing stiffness was found to be a strong function of bearing deflection, with higher deflection producing markedly higher stiffness. Curves fitted to the bearing data for a range of speeds and loads were supplied to a flexible rotor unbalance response analysis. The rotordynamic analysis showed that vibration response varied nonlinearly with the amount of rotor imbalance. Moreover, the increase in stiffness as critical speeds were approached caused a large increase in rotor and bearing vibration amplitude over part of the speed range compared to the case of constant bearing stiffness. Regions of bistable operation were possible, in which the amplitude at a given speed was much larger during rotor acceleration than during deceleration. A moderate amount of damping will eliminate the bistable region, but this damping is not inherent in ball bearings.

  20. Influences of credibility of testimony and strength of statistical evidence on children’s and adolescents’ reasoning

    OpenAIRE

    Kail, Robert V.

    2013-01-01

    According to dual-process models that include analytic and heuristic modes of processing, analytic processing is often expected to become more common with development. Consistent with this view, on reasoning problems, adolescents are more likely than children to select alternatives that are backed by statistical evidence. It is shown here that this pattern depends on the quality of the statistical evidence and the quality of the testimonial that is the typical alternative to statistical evide...

  1. Local Attitudes towards Bear Management after Illegal Feeding and Problem Bear Activity

    Directory of Open Access Journals (Sweden)

    David Fraser

    2013-09-01

    Full Text Available The “pot bears” received international media attention in 2010 after police discovered the intentional feeding of over 20 black bears during the investigation of an alleged marijuana-growing operation in Christina Lake, British Columbia, Canada. A two-phase random digit dialing survey of the community was conducted in 2011 to understand local perspectives on bear policy and management, before and after a summer of problem bear activity and government interventions. Of the 159 households surveyed in February 2011, most had neutral or positive attitudes towards bears in general, and supported the initial decision to feed the food-conditioned bears until the autumn hibernation. In contrast to wildlife experts however, most participants supported relocating the problem bears, or allowing them to remain in the area, ahead of killing; in part this arose from notions of fairness despite the acknowledged problems of relocation. Most locals were aware of the years of feeding but did not report it, evidently failing to see it as a serious form of harm, even after many bears had been killed. This underscores the importance of preventive action on wildlife feeding and the need to narrow the gap between public and expert opinion on the likely effects of relocation versus killing.

  2. Bearing construction for refrigeration compresssor

    Science.gov (United States)

    Middleton, Marc G.; Nelson, Richard T.

    1988-01-01

    A hermetic refrigeration compressor has a cylinder block and a crankshaft rotatable about a vertical axis to reciprocate a piston in a cylinder on the cylinder block. A separate bearing housing is secured to the central portion of the cylinder block and extends vertically along the crankshaft, where it carries a pair of roller bearings to journal the crankshaft. The crankshaft has a radially extending flange which is journaled by a thrust-type roller bearing above the bearing housing to absorb the vertical forces on the crankshaft so that all three of the roller bearings are between the crankshaft and the bearing housing to maintain and control the close tolerances required by such bearings.

  3. A semi-analytical bearing model considering outer race flexibility for model based bearing load monitoring

    Science.gov (United States)

    Kerst, Stijn; Shyrokau, Barys; Holweg, Edward

    2018-05-01

    This paper proposes a novel semi-analytical bearing model addressing flexibility of the bearing outer race structure. It furthermore presents the application of this model in a bearing load condition monitoring approach. The bearing model is developed as current computational low cost bearing models fail to provide an accurate description of the more and more common flexible size and weight optimized bearing designs due to their assumptions of rigidity. In the proposed bearing model raceway flexibility is described by the use of static deformation shapes. The excitation of the deformation shapes is calculated based on the modelled rolling element loads and a Fourier series based compliance approximation. The resulting model is computational low cost and provides an accurate description of the rolling element loads for flexible outer raceway structures. The latter is validated by a simulation-based comparison study with a well-established bearing simulation software tool. An experimental study finally shows the potential of the proposed model in a bearing load monitoring approach.

  4. 39 CFR 230.17 - If an attempt is made to compel production of reports and records during the employee's testimony...

    Science.gov (United States)

    2010-07-01

    ... 39 Postal Service 1 2010-07-01 2010-07-01 false If an attempt is made to compel production of reports and records during the employee's testimony, what is an Office of Inspector General employee... Information Act and shall be handled pursuant to 39 CFR 230.5. ...

  5. Desegregation of Public Schools. Testimony before the Subcommittee on Separation of Powers, Committee on the Judiciary, United States Senate.

    Science.gov (United States)

    Reynolds, William Bradford

    This testimony was delivered by William Bradford Reynolds, the Assistant Attorney General of the Civil Rights Division, before the Subcommttee on Separation of Powers, Committee on the Judiciary of the United States Senate. Reynold states that compulsory busing of students is not an acceptable remedy to achieve racial balance. He emphasizes the…

  6. BETWEEN PSYCHOANALYSIS AND TESTIMONIAL SPACE: THE ANALYST AS A WITNESS.

    Science.gov (United States)

    Gondar, Jô

    2017-04-01

    The aim of this article is to think of the place of the witness as a third place that the analyst, in the clinical space of trauma, is able to sustain. According to Ferenczi, in traumatic dreams a third is already being summoned. It is not the witness of the realm of law, nor the place of the father or the symbolic law. This is a third space that can be called potential, interstitial space, indeterminate and formless, where something that at first would be incommunicable circulates and gradually takes shape. This space allows and supports the literalness of a testimonial narrative, its hesitations, paradoxes and silences. More than a trauma theory, the notion of a potential space would be the great contribution of psychoanalysis to the treatment of trauma survivors, establishing the difference between the task of a psychoanalyst and the one of a truth commission.

  7. EFFECT OF CLEARANCE THE BALL BEARINGS ON INCORRECT WORK OF THREE-SUPORT BEARING SHAFT

    OpenAIRE

    Jarosław KACZOR

    2014-01-01

    Durability deep groove ball bearings depends on factors (called attributes) design, technological and operational. Among the design features one of the most important is play in the bearings. Polish Norm shows five groups of looseness in the bearings, in which the play range from 0 to 105 microns. Manufacturers of rolling bearings they only play group, which has a bearing data, without giving the exact value of the slack. Aim of this study is to determine how it affects the play in the bea...

  8. Genetic variation, relatedness, and effective population size of polar bears (Ursus maritimus) in the southern Beaufort Sea, Alaska

    Science.gov (United States)

    Cronin, Matthew A.; Amstrup, Steven C.; Talbot, Sandra L.; Sage, George K.; Amstrup, Kristin S.

    2009-01-01

    Polar bears (Ursus maritimus) are unique among bears in that they are adapted to the Arctic sea ice environment. Genetic data are useful for understanding their evolution and can contribute to management. We assessed parentage and relatedness of polar bears in the southern Beaufort Sea, Alaska, with genetic data and field observations of age, sex, and mother–offspring and sibling relationships. Genotypes at 14 microsatellite DNA loci for 226 bears indicate that genetic variation is comparable to other populations of polar bears with mean number of alleles per locus of 7.9 and observed and expected heterozygosity of 0.71. The genetic data verified 60 field-identified mother–offspring pairs and identified 10 additional mother–cub pairs and 48 father–offspring pairs. The entire sample of related and unrelated bears had a mean pairwise relatedness index (rxy) of approximately zero, parent–offspring and siblings had rxy of approximately 0.5, and 5.2% of the samples had rxy values within the range expected for parent-offspring. Effective population size (Ne= 277) and the ratio of Ne to total population size (Ne/N = 0.182) were estimated from the numbers of reproducing males and females. Ne estimates with genetic methods gave variable results. Our results verify and expand field data on reproduction by females and provide new data on reproduction by males and estimates of relatedness and Ne in a polar bear population.

  9. [Brain death in children--how to deal with the parents?].

    Science.gov (United States)

    Schindler, Nicola; Vagts, Dierk

    2008-07-01

    For parents the death of children is hard to bear and to accept. In situations where a brain death needs to be diagnosed, the psychological stress for parents who lose their child is aggravated due to a mostly sudden and unprepared confrontation with this situation. The rationality to accept the death of a their child is opposed by the hope for recovery as long as the children are "warm and dead" instead of "cold and dead" due to the maintenance of cardiac circulation. In Germany in this situation, after diagnosing the brain death, doctors are forced by legislation to ask the parents to agree for organ donation. However, to our knowledge, no literature is available how doctors should conduct such an important conversation to the parents. This manuscript tries to give some hints for conducting a conversation from the psychological background of mourning and from our own experience gained during the last 5 years.

  10. Bearing restoration by grinding

    Science.gov (United States)

    Hanau, H.; Parker, R. J.; Zaretsky, E. V.; Chen, S. M.; Bull, H. L.

    1976-01-01

    A joint program was undertaken by the NASA Lewis Research Center and the Army Aviation Systems Command to restore by grinding those rolling-element bearings which are currently being discarded at aircraft engine and transmission overhaul. Three bearing types were selected from the UH-1 helicopter engine (T-53) and transmission for the pilot program. No bearing failures occurred related to the restoration by grinding process. The risk and cost of a bearing restoration by grinding programs was analyzed. A microeconomic impact analysis was performed.

  11. Impact of Fixed-Bearing and Mobile-Bearing Tibial Insert in Unicondylar Knee Arthroplasty

    Directory of Open Access Journals (Sweden)

    Mehmet Faruk Çatma

    2016-06-01

    Full Text Available INTRODUCTION: The aim of the study is to investigate the impact of fixed or mobile-bearing tibial inserts on patellofemoral arthrosis and evaluate which one to be preferred for patients with patellofemoral arthrosis. METHODS: Operated in our clinic between January 2009 and February 2013, 33 with patellofemoral arthritis together with anteromedial compartment arthritis were included in the study. Patellofemoral joints of patients were evaluated according to the scoring system defined by Fulkerson-Shea. RESULTS: Unicondylar knee arthroplasty with fixed-bearing tibial insertsand 22 (66,6% (male: 3, female: 19 and unicondylar knee arthroplasty with mobile-bearing tibial inserts 11 (33,9 % (male: 2, female: 9 were implanted.Average knee flexion was found to be 116,5 (100-135 degrees in 22 patients with mobile-bearing tibial inserts, and 114,5 (95-135 in 11 patients with fixed-bearing tibial inserts. DISCUSSION AND CONCLUSION: Patellofemoral arthrosis is an important factor for unicondylar knee arthroplasty prognosis and one of the determinants of patient satisfaction. Significantly less patellofemoral complaints were seen with UKA with fixed-bearing tibial insert compared to mobile-bearing tibial insert.

  12. Compensation of Environmental Natural Underground Cavities in Environmental Licensing: The Hollow of Fixing the Possibility of Testimony for Impacts of Irreversible Developments in Underground Cavities Degree of Relevance Average

    Directory of Open Access Journals (Sweden)

    Dioclides José Maria

    2016-06-01

    Full Text Available This study aims to analyze the Decree. 99.556 of 10.1º.1990 with the wording given by Decree. 6640, of 11.07.2008 dealing on protection of speleological heritage. The hypothesis is application of compensatory measure of permanent preservation cavities testimony in irreversible impacts of projects of medium significance level of underground cavities. By qualitative method and bibliographic research, it presented considerations about the possibility of preserving permanently underground cavities testimony by project impacts on medium relevance degree of natural underground cavities.

  13. Climate Drives Polar Bear Origins

    Science.gov (United States)

    In their provocative analysis of northern bears (“Nuclear genomic sequences reveal that polar bears are an old and distinct bear lineage,” Reports, 20 April, p. 344), F. Hailer et al. use independent nuclear loci to show that polar bears originated during the middle Pleistocene, rather than during t...

  14. Parents and Daughters in Two Novels by Arab American Authors: “Khalas, Let Her Go”

    OpenAIRE

    Ismet Bujupaj

    2016-01-01

    Multiple intersecting pressures bear upon immigrant parent-child, and especially immigrant mother-daughter relationships depicted in Randa Jarrar’s novel, A Map of Home, and Mohja Kahf ’s novel, The Girl in the Tangerine Scarf. Each of these novels is a Bildungsroman story, the protagonist of each being a budding artist. As the growing daughters struggle toward autonomy and parents react from complex pressures upon them, the reader gains insight on the interconnected structural and psychologi...

  15. The use of Teddy Bears to help develop interpersonal context to promote intrinsic motivation

    Directory of Open Access Journals (Sweden)

    Rabb Andrews, Tamatha

    2004-12-01

    Full Text Available This article is based on the findings of using a teddy bear as a tool to provide a way of increasing pupils ' motivation toward learning by means of using a stuffed animal such as a teddy bear named Ken Bear and relating it to learning a L2. It was developed in hopes to improve not only the motivation of students but give a positive backwash on the institution itself by giving the school a positive interpersonal context. Voluntary students participated in this project, which consisted of taking care of a teddy bear as a friend or playmate for a day or a few days. At the end of such time, the students would write a short entry into the bear ' s diary in English if possible, if not, in Spanish or just a picture with a few words. Results indicated that this project was a huge success based on the opinions of students, teachers and parents. El siguiente artículo esta basado en los resultados obtenidos de una investigación cuyo objetivo fue el utilizar un oso de peluche como una herramienta para incrementar la motivación de los estudiantes hacia el aprendizaje del inglés como segunda lengua. Esta trabajo investigativo fue desarrollado esperando mejorar no solo la motivación de los educandos por medio de este recurso novedoso, sino también darle un giro positivo al ambiente de relaciones interpersonales en la institución donde se realizo este proyecto.

  16. A Weldability Study of Structural Materials for Manufacturing Bearing Separators

    Directory of Open Access Journals (Sweden)

    V. S. Drizhov

    2016-01-01

    Full Text Available The aim is to analyze the possibility for using the 08YUT steel separator tape to manufacture separators, which are to be further applied to the bearing assembly via projection welding.Reliability of rolling bearings is determined by many factors such as surface quality of balls and rings and assembly precision, including the seal strength of hemiseparators.The technology based on the double-pulsed condenser projection welding belongs to one of the most efficient technologies to provide the assembly of bearing, for it allows welding of separator simultaneously in all currents. The paper shows that the required condition to assure high reliability of the bearing is induastial development and implementation of an effective and positive quality control system, which will reduce the probability of damages occurring both when welding and in the course of operation.The work used the static tensile test methods, as well as metallographic analysis.The experimental study used the 08YUT steel hemiseparators. A tape thickness of the hemiseparators was of 1.5mm. The number of simultaneously welded points were 8. The experimental studies of the metal damage of welding joints of the the 08YUT steel separator have shown that with a wide range of the changing welding current and compressed electrode force the quality assurance of welding points at the parent metal level could not be retrieved.The metallographic analysis of the metal damage nature of a welded joint revealed that between the atoms on the surfaces of hemiseparators there are no strong bonds – a bond was formed in the contact zone. This phenomenon leads to reduced tensile seal strength.The study has shown that aluminum and titanium added to the low-carbon steel in order to have a more fine-grained metal structure has a negative effect on the quality of welded joint via projection welding.

  17. Ancestral polymorphisms and sex-biased migration shaped the demographic history of brown bears and polar bears.

    Directory of Open Access Journals (Sweden)

    Shigeki Nakagome

    Full Text Available Recent studies have reported discordant gene trees in the evolution of brown bears and polar bears. Genealogical histories are different among independent nuclear loci and between biparentally inherited autosomal DNA (aDNA and matrilineal mitochondrial DNA (mtDNA. Based on multi-locus genomic sequences from aDNA and mtDNA, we inferred the population demography of brown and polar bears and found that brown bears have 6 times (aDNA or more than 14 times (mtDNA larger population sizes than polar bears and that polar bear lineage is derived from within brown bear diversity. In brown bears, the effective population size ratio of mtDNA to aDNA was at least 0.62, which deviated from the expected value of 0.25, suggesting matriarchal population due to female philopatry and male-biased migration. These results emphasize that ancestral polymorphisms and sex-biased migration may have contributed to conflicting branching patterns in brown and polar bears across aDNA genes and mtDNA.

  18. Ancestral polymorphisms and sex-biased migration shaped the demographic history of brown bears and polar bears.

    Science.gov (United States)

    Nakagome, Shigeki; Mano, Shuhei; Hasegawa, Masami

    2013-01-01

    Recent studies have reported discordant gene trees in the evolution of brown bears and polar bears. Genealogical histories are different among independent nuclear loci and between biparentally inherited autosomal DNA (aDNA) and matrilineal mitochondrial DNA (mtDNA). Based on multi-locus genomic sequences from aDNA and mtDNA, we inferred the population demography of brown and polar bears and found that brown bears have 6 times (aDNA) or more than 14 times (mtDNA) larger population sizes than polar bears and that polar bear lineage is derived from within brown bear diversity. In brown bears, the effective population size ratio of mtDNA to aDNA was at least 0.62, which deviated from the expected value of 0.25, suggesting matriarchal population due to female philopatry and male-biased migration. These results emphasize that ancestral polymorphisms and sex-biased migration may have contributed to conflicting branching patterns in brown and polar bears across aDNA genes and mtDNA.

  19. Bearing for liquid metal pump

    International Nuclear Information System (INIS)

    Dickinson, R.J.; Pennell, W.E.; Wasko, J.

    1984-01-01

    A liquid metal pump bearing support comprises a series of tangentially oriented spokes that connect the bearing cylinder to the pump internals structure. The spokes may be arranged in a plurality of planes extending from the bearing cylinder to the pump internals with the spokes in one plane being arranged alternately with those in the next plane. The bearing support structure provides the pump with sufficient lateral support for the bearing structure together with the capability of accommodating differential thermal expansion without adversely affecting pump performance

  20. Work Ethic: Materialism and the American Family. Hearing before the Subcommittee on Aging, Family and Human Services of the Committee on Labor and Human Resources, United States Senate, Ninety-Seventh Congress, Second Session on Examination on the Impact of Stress on the Family Caused by the Workplace, Focusing on Dual Wage-Earning Parents and the Effects on Family Relationships, and the Nonworking Recipient of Public Assistance.

    Science.gov (United States)

    Congress of the U.S., Washington, DC. Senate Committee on Labor and Human Resources.

    This congressional hearing contains testimony pertinent to the impact of stress on the American family caused by the workplace. Focus of the hearing is on dual wage-earning parents and the effects on family relationships as well as on non-working recipients of public assistance. The following agencies and organizations were among those represented…

  1. Ultra-precision bearings

    CERN Document Server

    Wardle, F

    2015-01-01

    Ultra-precision bearings can achieve extreme accuracy of rotation, making them ideal for use in numerous applications across a variety of fields, including hard disk drives, roundness measuring machines and optical scanners. Ultraprecision Bearings provides a detailed review of the different types of bearing and their properties, as well as an analysis of the factors that influence motion error, stiffness and damping. Following an introduction to basic principles of motion error, each chapter of the book is then devoted to the basic principles and properties of a specific type of bearin

  2. Watchable Wildlife: The Black Bear

    Science.gov (United States)

    Lynn L. Rogers

    1992-01-01

    Black bears are the bears people most often encounter. Black bears live in forests over much of North America, unlike grizzlies that live only in Alaska, northern and western Canada, and the northern Rocky Mountains. This brochure presents the latest information on black bear life and how this species responds to an ever-increasing number of campers, hikers, and...

  3. Active magnetic bearings used as exciters for rolling element bearing outer race defect diagnosis.

    Science.gov (United States)

    Xu, Yuanping; Di, Long; Zhou, Jin; Jin, Chaowu; Guo, Qintao

    2016-03-01

    The active health monitoring of rotordynamic systems in the presence of bearing outer race defect is considered in this paper. The shaft is assumed to be supported by conventional mechanical bearings and an active magnetic bearing (AMB) is used in the mid of the shaft location as an exciter to apply electromagnetic force to the system. We investigate a nonlinear bearing-pedestal system model with the outer race defect under the electromagnetic force. The nonlinear differential equations are integrated using the fourth-order Runge-Kutta algorithm. The simulation and experimental results show that the characteristic signal of outer race incipient defect is significantly amplified under the electromagnetic force through the AMBs, which is helpful to improve the diagnosis accuracy of rolling element bearing׳s incipient outer race defect. Copyright © 2016 ISA. Published by Elsevier Ltd. All rights reserved.

  4. De novo SNP discovery in the Scandinavian brown bear (Ursus arctos.

    Directory of Open Access Journals (Sweden)

    Anita J Norman

    Full Text Available Information about relatedness between individuals in wild populations is advantageous when studying evolutionary, behavioural and ecological processes. Genomic data can be used to determine relatedness between individuals either when no prior knowledge exists or to confirm suspected relatedness. Here we present a set of 96 SNPs suitable for inferring relatedness for brown bears (Ursus arctos within Scandinavia. We sequenced reduced representation libraries from nine individuals throughout the geographic range. With consensus reads containing putative SNPs, we applied strict filtering criteria with the aim of finding only high-quality, highly-informative SNPs. We tested 150 putative SNPs of which 96% were validated on a panel of 68 individuals. Ninety-six of the validated SNPs with the highest minor allele frequency were selected. The final SNP panel includes four mitochondrial markers, two monomorphic Y-chromosome sex-determination markers, three X-chromosome SNPs and 87 autosomal SNPs. From our validation sample panel, we identified two previously known parent-offspring dyads with reasonable accuracy. This panel of SNPs is a promising tool for inferring relatedness in the brown bear population in Scandinavia.

  5. Genomic Evidence of Widespread Admixture from Polar Bears into Brown Bears during the Last Ice Age.

    Science.gov (United States)

    Cahill, James A; Heintzman, Peter D; Harris, Kelley; Teasdale, Matthew D; Kapp, Joshua; Soares, Andre E R; Stirling, Ian; Bradley, Daniel; Edwards, Ceiridwen J; Graim, Kiley; Kisleika, Aliaksandr A; Malev, Alexander V; Monaghan, Nigel; Green, Richard E; Shapiro, Beth

    2018-05-01

    Recent genomic analyses have provided substantial evidence for past periods of gene flow from polar bears (Ursus maritimus) into Alaskan brown bears (Ursus arctos), with some analyses suggesting a link between climate change and genomic introgression. However, because it has mainly been possible to sample bears from the present day, the timing, frequency, and evolutionary significance of this admixture remains unknown. Here, we analyze genomic DNA from three additional and geographically distinct brown bear populations, including two that lived temporally close to the peak of the last ice age. We find evidence of admixture in all three populations, suggesting that admixture between these species has been common in their recent evolutionary history. In addition, analyses of ten fossil bears from the now-extinct Irish population indicate that admixture peaked during the last ice age, whereas brown bear and polar bear ranges overlapped. Following this peak, the proportion of polar bear ancestry in Irish brown bears declined rapidly until their extinction. Our results support a model in which ice age climate change created geographically widespread conditions conducive to admixture between polar bears and brown bears, as is again occurring today. We postulate that this model will be informative for many admixing species pairs impacted by climate change. Our results highlight the power of paleogenomics to reveal patterns of evolutionary change that are otherwise masked in contemporary data.

  6. Prevention of Filipino Youth Behavioral Health Disparities: Identifying Barriers and Facilitators to Participating in "Incredible Years," an Evidence-Based Parenting Intervention, Los Angeles, California, 2012.

    Science.gov (United States)

    Flores, Nicole; Supan, Jocelyn; Kreutzer, Cary B; Samson, Allan; Coffey, Dean M; Javier, Joyce R

    2015-10-22

    Evidence-based interventions for training parents are proven to prevent onset and escalation of childhood mental health problems. However, participation in such programs is low, especially among hard-to-reach, underserved populations such as Filipino Americans. Filipinos, the largest Asian subgroup in California, have significant behavioral health disparities compared with non-Hispanic whites and other Asian subgroups. The purpose of this study was to learn about Filipinos' barriers and facilitators to participating in "Incredible Years" (IY), a parenting program. We conducted 4 focus groups in Los Angeles, California, in 2012; the groups consisted of 20 Filipino parents of children aged 6 to 12 years who recently completed the IY parenting program, which was offered as a prevention workshop. Three reviewers, including two co-authors (A.S., J.J.) and a research assistant used content analysis to independently code the interview transcripts and extract subthemes. Grounded theory analytic methods were used to analyze interview transcripts. Parents' perceived benefits of participation in IY were learning more effective parenting techniques, networking with other parents, improved spousal relationships, and improvements in their children's behavior. Parents' most common motivating factor for enrollment in IY was to improve their parenting skills and their relationships with their children. The most common barriers to participation were being uncomfortable sharing problems with others and the fear of being stigmatized by others judging their parenting skills. Participants said that parent testimonials would be the most effective way to promote IY. Many recommended outreach at schools, pediatricians' offices, and churches. Increasing Filipino American parent enrollment in IY in culturally relevant ways will reduce the incidence of mental health disorders among children in this growing population.

  7. Scaling laws for radial foil bearings

    Science.gov (United States)

    Honavara Prasad, Srikanth

    The effects of fluid pressurization, structural deformation of the compliant members and heat generation in foil bearings make the design and analysis of foil bearings very complicated. The complex fluid-structural-thermal interactions in foil bearings also make modeling efforts challenging because these phenomena are governed by highly non-linear partial differential equations. Consequently, comparison of various bearing designs require detailed calculation of the flow fields (velocities, pressures), bump deflections (structural compliance) and heat transfer phenomena (viscous dissipation in the fluid, frictional heating, temperature profile etc.,) resulting in extensive computational effort (time/hardware). To obviate rigorous computations and aid in feasibility assessments of foil bearings of various sizes, NASA developed the "rule of thumb" design guidelines for estimation of journal bearing load capacity. The guidelines are based on extensive experimental data. The goal of the current work is the development of scaling laws for radial foil bearings to establish an analytical "rule of thumb" for bearing clearance and bump stiffness. The use of scale invariant Reynolds equation and experimentally observed NASA "rule of thumb" yield scale factors which can be deduced from first principles. Power-law relationships between: a. Bearing clearance and bearing radius, and b. bump stiffness and bearing radius, are obtained. The clearance and bump stiffness values obtained from scaling laws are used as inputs for Orbit simulation to study various cases. As the clearance of the bearing reaches the dimensions of the material surface roughness, asperity contact breaks the fluid film which results in wear. Similarly, as the rotor diameter increases (requiring larger bearing diameters), the load capacity of the fluid film should increase to prevent dry rubbing. This imposes limits on the size of the rotor diameter and consequently bearing diameter. Therefore, this thesis aims

  8. Bears and pipeline construction in Alaska

    Energy Technology Data Exchange (ETDEWEB)

    Follmann, E.H.; Hechtel, J.L. (Univ. of Alaska Fairbanks, AK (USA))

    1990-06-01

    Serious problems were encountered with bears during construction of the 1274-km trans-Alaska oil pipeline between Prudhoe Bay and Valdez. This multi-billion-dollar project traversed both black bear (Ursus americanus Pallas) and grizzly bear (U. arctos L.) habitat throughtout its entire length. Plans for dealing with anticipated problems with bears were often inadequate. Most (71%) problems occurred north of the Yukon River in a previously roadless wilderness where inadequate refuse disposal and widespread animal feeding created dangerous situations. Of the 192 officially reported bear problems associated with the Trans-Alaska Pipeline System (TAPS) (1971-1979), about 65% involved the presence of bears in camps or dumps, 13% the feeding of bears on garbage or handouts, 10% property damage or economic loss, 7% bears under and in buildings, and only 5% charges by bears. Remarkably, no bear-related injuries were reported, suggesting that bears became accustomed to people and did not regard them as a threat. Following construction of the TAPS there have been proposals for pipelines to transport natural gas from Prudhoe Bay to southern and Pacific-rim markets. Based on past experience, some animal control measures were developed during the planning phase for the authorized gas pipeline route in Alaska. Fences installed around 100-person survey camps were found to be effective in deterring bears in two traditionally troublesome areas. 16 refs., 7 figs., 1 tab.

  9. Computational design of rolling bearings

    CERN Document Server

    Nguyen-Schäfer, Hung

    2016-01-01

    This book comprehensively presents the computational design of rolling bearings dealing with many interdisciplinary difficult working fields. They encompass elastohydrodynamics (EHD), Hertzian contact theory, oil-film thickness in elastohydrodynamic lubrication (EHL), bearing dynamics, tribology of surface textures, fatigue failure mechanisms, fatigue lifetimes of rolling bearings and lubricating greases, Weibull distribution, rotor balancing, and airborne noises (NVH) in the rolling bearings. Furthermore, the readers are provided with hands-on essential formulas based on the up-to-date DIN ISO norms and helpful examples for computational design of rolling bearings. The topics are intended for undergraduate and graduate students in mechanical and material engineering, research scientists, and practicing engineers who want to understand the interactions between these working fields and to know how to design the rolling bearings for automotive industry and many other industries.

  10. The use of double-decker catcher bearing with face-to-face installed inner layer bearings

    Science.gov (United States)

    Zhu, Yi-Li; Zheng, Zhong-Qiao

    2017-07-01

    In active magnetic bearing (AMB) system, the catcher bearings (CB) are indispensable to temporarily support the rotor from directly impacting the stators. In most cases, traditional CB cannot bear the ultra-high speed, vibrations and impacts after a rotor drop event. To address the shortcomings, a double-decker ball bearing (DDBB) with inner two face-to-face angular contact ball bearings are proposed to be used as CB in an AMB system, and the dynamic response of the rotor after a rotor drop event is experimentally analyzed. The results indicate that using a DDBB as a CB helps to reduce the following collision forces after a rotor drop. Larger ball initial contact angles and smaller pre-load force on the inner layer bearings, larger radial clearance of the outer layer bearing and choosing AISI 10AISI 1045 steel which has a larger density for the adapter ring can effectively reduce the maximum impact force after a rotor drop event.

  11. Polar bears, Ursus maritimus

    Science.gov (United States)

    Rode, Karyn D.; Stirling, Ian

    2017-01-01

    Polar bears are the largest of the eight species of bears found worldwide and are covered in a pigment-free fur giving them the appearance of being white. They are the most carnivorous of bear species consuming a high-fat diet, primarily of ice-associated seals and other marine mammals. They range throughout the circumpolar Arctic to the southernmost extent of seasonal pack ice.

  12. Acoustic Emission Monitoring of Incipient in Journal Bearings - Part I : Detectability and measurement for bearing damages

    International Nuclear Information System (INIS)

    Yoon, Dong Jin; Kwon, Oh Yang; Chung, Min Hwa; Kim, Kyung Woong

    1994-01-01

    In contrast to the machinery using rolling element bearings, systems with journal bearings generally operate in large scale and under severe loading condition such as steam generator turbines and internal combustion engines. Failure of the bearings in these machinery can result in the system breakdown. To avoid the time consuming repair and considerable economic loss, the detection of incipient failure in journal bearings becomes very important. In this experimental approach, acoustic emission monitoring is applied to the detection of incipient failure caused by several types of abnormal operating condition most probable in the journal bearing systems. It has been known that the intervention of foreign materials, insufficient lubrication and misassembly etc. are principal factors to cause bearing failure and distress. The experiment was conducted under such designed conditions as hard particles in the lubrication layer, insufficient lubrication, and metallic contact in the simulated journal bearing system. The results showed that acoustic emission could be an effective tool to detect the incipient failure in journal bearings

  13. Migration and clinical outcome of mobile-bearing versus fixed-bearing single-radius total knee arthroplasty.

    Science.gov (United States)

    Van Hamersveld, Koen T; Marang-Van De Mheen, Perla J; Van Der Heide, Huub J L; Van Der Linden-Van Der Zwaag, Henrica M J; Valstar, Edward R; Nelissen, Rob G H H

    2018-04-01

    Background and purpose - Mobile-bearing total knee prostheses (TKPs) were developed in the 1970s in an attempt to increase function and improve implant longevity. However, modern fixed-bearing designs like the single-radius TKP may provide similar advantages. We compared tibial component migration measured with radiostereometric analysis (RSA) and clinical outcome of otherwise similarly designed cemented fixed-bearing and mobile-bearing single-radius TKPs. Patients and methods - RSA measurements and clinical scores were assessed in 46 randomized patients at baseline, 6 months, 1 year, and annually thereafter up to 6 years postoperatively. A linear mixed-effects model was used to analyze the repeated measurements. Results - Both groups showed comparable migration (p = 0.3), with a mean migration at 6-year follow-up of 0.90 mm (95% CI 0.49-1.41) for the fixed-bearing group compared with 1.22 mm (95% CI 0.75-1.80) for the mobile-bearing group. Clinical outcomes were similar between groups. 1 fixed-bearing knee was revised for aseptic loosening after 6 years and 2 knees (1 in each group) were revised for late infection. 2 knees (1 in each group) were suspected for loosening due to excessive migration. Another mobile-bearing knee was revised after an insert dislocation due to failure of the locking mechanism 6 weeks postoperatively, after which study inclusion was preliminary terminated. Interpretation - Fixed-bearing and mobile-bearing single-radius TKPs showed similar migration. The latter may, however, expose patients to more complex surgical techniques and risks such as insert dislocations inherent to this rotating-platform design.

  14. Marine archaeological explorations in the Kaveripoompattinam regions: Fresh light on the structural remains

    Digital Repository Service at National Institute of Oceanography (India)

    Tripati, S.; Gaur, A.S.; Sundaresh; Gudigar, P.

    Kaveripoompattinam also known as Poompuhar, was a port which played an important role in the maritime history of India. Archaeological findings, and inscriptional as well as literary evidence bear ample testimony to this. Recent discoveries made...

  15. 39 CFR 230.24 - How is a demand for employee documents or testimony made to the Office of Inspector General?

    Science.gov (United States)

    2010-07-01

    ... 39 Postal Service 1 2010-07-01 2010-07-01 false How is a demand for employee documents or testimony made to the Office of Inspector General? 230.24 Section 230.24 Postal Service UNITED STATES POSTAL SERVICE ORGANIZATION AND ADMINISTRATION OFFICE OF INSPECTOR GENERAL Rules Governing Compliance With Subpoenas, Summonses, and Court Orders by Postal...

  16. Ancient DNA reveals differences in behaviour and sociality between brown bears and extinct cave bears.

    Science.gov (United States)

    Fortes, Gloria G; Grandal-d'Anglade, Aurora; Kolbe, Ben; Fernandes, Daniel; Meleg, Ioana N; García-Vázquez, Ana; Pinto-Llona, Ana C; Constantin, Silviu; de Torres, Trino J; Ortiz, Jose E; Frischauf, Christine; Rabeder, Gernot; Hofreiter, Michael; Barlow, Axel

    2016-10-01

    Ancient DNA studies have revolutionized the study of extinct species and populations, providing insights on phylogeny, phylogeography, admixture and demographic history. However, inferences on behaviour and sociality have been far less frequent. Here, we investigate the complete mitochondrial genomes of extinct Late Pleistocene cave bears and middle Holocene brown bears that each inhabited multiple geographically proximate caves in northern Spain. In cave bears, we find that, although most caves were occupied simultaneously, each cave almost exclusively contains a unique lineage of closely related haplotypes. This remarkable pattern suggests extreme fidelity to their birth site in cave bears, best described as homing behaviour, and that cave bears formed stable maternal social groups at least for hibernation. In contrast, brown bears do not show any strong association of mitochondrial lineage and cave, suggesting that these two closely related species differed in aspects of their behaviour and sociality. This difference is likely to have contributed to cave bear extinction, which occurred at a time in which competition for caves between bears and humans was likely intense and the ability to rapidly colonize new hibernation sites would have been crucial for the survival of a species so dependent on caves for hibernation as cave bears. Our study demonstrates the potential of ancient DNA to uncover patterns of behaviour and sociality in ancient species and populations, even those that went extinct many tens of thousands of years ago. © 2016 John Wiley & Sons Ltd.

  17. Non-contacting "snubber bearing" for passive magnetic bearing systems

    Science.gov (United States)

    Post, Richard F

    2017-08-22

    A new non-contacting magnetic "snubber" bearing is provided for application to rotating systems such as vehicular electromechanical battery systems subject to frequent accelerations. The design is such that in the equilibrium position the drag force of the snubber is very small (milliwatts). However in a typical case, if the rotor is displaced by as little as 2 millimeters a large restoring force is generated without any physical contact between the stationary and rotating parts of the snubber bearing.

  18. Journal and Wave Bearing Impedance Calculation Software

    Science.gov (United States)

    Hanford, Amanda; Campbell, Robert

    2012-01-01

    The wave bearing software suite is a MALTA application that computes bearing properties for user-specified wave bearing conditions, as well as plain journal bearings. Wave bearings are fluid film journal bearings with multi-lobed wave patterns around the circumference of the bearing surface. In this software suite, the dynamic coefficients are outputted in a way for easy implementation in a finite element model used in rotor dynamics analysis. The software has a graphical user interface (GUI) for inputting bearing geometry parameters, and uses MATLAB s structure interface for ease of interpreting data. This innovation was developed to provide the stiffness and damping components of wave bearing impedances. The computational method for computing bearing coefficients was originally designed for plain journal bearings and tilting pad bearings. Modifications to include a wave bearing profile consisted of changing the film thickness profile given by an equation, and writing an algorithm to locate the integration limits for each fluid region. Careful consideration was needed to implement the correct integration limits while computing the dynamic coefficients, depending on the form of the input/output variables specified in the algorithm.

  19. Bears, Big and Little. Young Discovery Library Series.

    Science.gov (United States)

    Pfeffer, Pierre

    This book is written for children 5 through 10. Part of a series designed to develop their curiosity, fascinate them and educate them, this volume describes: (1) the eight species of bears, including black bear, brown bear, grizzly bear, spectacled bear, sun bear, sloth bear, polar bear, and giant panda; (2) geographical habitats of bears; (3)…

  20. Bearing tester data compilation analysis, and reporting and bearing math modeling

    Science.gov (United States)

    Cody, J. C.

    1986-01-01

    Integration of heat transfer coefficients, modified to account for local vapor quality, into the 45 mm bearing model has been completed. The model has been evaluated with two flow rates and subcooled and saturated coolant. The evaluation showed that by increasing the flow from 3.6 to 7.0 lbs/sec the average ball temperature was decreased by 102 F, using a coolant temperature of -230 F. The average ball temperature was decreased by 63 F by decreasing the inlet coolant temperature from saturated to -230 F at a flow rate of 7.0 lbs/sec. Since other factors such as friction, cage heating, etc., affect bearing temperatures, the above bearing temperature effects should be considered as trends and not absolute values. The two phase heat transfer modification has been installed in the 57 mm bearing model and the effects on bearing temperatures have been evaluated. The average ball temperature was decreased by 60 F by increasing the flow rate from 4.6 to 9.0 lbs/sec for the subcooled case. By decreasing the inlet coolant temperature from saturation to -24 F, the average ball temperature was decreased 57 F for a flow rate of 9.0 lbs/sec. The technique of relating the two phase heat transfer coefficient to local vapor quality will be applied to the tester model and compared with test data.

  1. Print Advertising of Educational Services: an investigation on the impact of the pictures facilities and testimonial about attitudes

    OpenAIRE

    Ayrosa, Eduardo André Teixeira; Facó, Marcos Henrique

    2010-01-01

    Just like other services organizations, some higher education institutions have invested in printed advertising to attract applicants. The services management literature suggests that using stimuli such as pictures of the facilities and alumni testimonials may help to turn tangible the offer of services so strongly intangible as higher education. In the present work, the impact of two different types of cue on prospects' attitudes is investigated. The cue paradigm (Olson & Jacoby 1972) has be...

  2. Usurping the Apocryphal: Antonio Muñoz Molina's Cosmopolitan Memory of Max Aub's Rhetoric of Testimony

    OpenAIRE

    Aguirre Oteiza, Daniel

    2017-01-01

    This paper focuses on a recent gesture by the Spanish novelist and public intellectual Antonio Muñoz Molina to publicly recuperate Aub’s testimony of uprootedness in France, Algeria, and Mexico, a gesture that relies on the concept of cosmopolitan memory as it has been developed in Holocaust studies. I critique Muñoz Molina’s use of the Holocaust as a template for a transnational cultural history based on a supposedly shared Jewish past. Muñoz Molina generalizes on two levels: he turns Aub in...

  3. Tribology of alternative bearings.

    Science.gov (United States)

    Fisher, John; Jin, Zhongmin; Tipper, Joanne; Stone, Martin; Ingham, Eileen

    2006-12-01

    The tribological performance and biological activity of the wear debris produced has been compared for highly cross-linked polyethylene, ceramic-on-ceramic, metal-on-metal, and modified metal bearings in a series of in vitro studies from a single laboratory. The functional lifetime demand of young and active patients is 10-fold greater than the estimated functional lifetime of traditional polyethylene. There is considerable interest in using larger diameter heads in these high demand patients. Highly cross-linked polyethylene show a four-fold reduction in functional biological activity. Ceramic-on-ceramic bearings have the lowest wear rates and least reactive wear debris. The functional biological activity is 20-fold lower than with highly cross-linked polyethylene. Hence, ceramic-on-ceramic bearings address the tribological lifetime demand of highly active patients. Metal-on-metal bearings have substantially lower wear rates than highly cross-linked polyethylene and wear decreases with head diameter. Bedding in wear is also lower with reduced radial clearance. Differential hardness ceramic-on-metal bearings and the application of ceramic-like coatings reduce metal wear and ion levels.

  4. Journal bearing impedance descriptions for rotordynamic applications

    NARCIS (Netherlands)

    Childs, D.W.; Moes, H.; Leeuwen, van H.J.

    1977-01-01

    Bearing impedance vectors are introduced for plain journal bearings which define the bearing reaction force components as a function of the bearing motion. Impedance descriptions are developed directly for the approximate Ocvirk (short) and Sommerfeld (long) bearing solutions. The impedance vector

  5. TOOL ASSEMBLY WITH BI-DIRECTIONAL BEARING

    Science.gov (United States)

    Longhurst, G.E.

    1961-07-11

    A two-direction motion bearing which is incorporated in a refueling nuclear fuel element trsnsfer tool assembly is described. A plurality of bi- directional bearing assembliesare fixed equi-distantly about the circumference of the transfer tool assembly to provide the tool assembly with a bearing surface- for both axial and rotational motion. Each bi-directional bearing assembly contains a plurality of circumferentially bulged rollers mounted in a unique arrangement which will provide a bearing surface for rotational movement of the tool assembly within a bore. The bi-direc tional bearing assembly itself is capable of rational motion and thus provides for longitudinal movement of the tool assembly.

  6. Estimating Wear Of Installed Ball Bearings

    Science.gov (United States)

    Keba, John E.; Mcvey, Scott E.

    1993-01-01

    Simple inspection and measurement technique makes possible to estimate wear of balls in ball bearing, without removing bearing from shaft on which installed. To perform measurement, one observes bearing cage while turning shaft by hand to obtain integral number of cage rotations and to measure, to nearest 2 degrees, number of shaft rotations producing cage rotations. Ratio between numbers of cages and shaft rotations depends only on internal geometry of bearing and applied load. Changes in turns ratio reflect changes in internal geometry of bearing provided measurements made with similar bearing loads. By assuming all wear occurs on balls, one computes effective value for this wear from change in turns ratio.

  7. Noise of oil lubricated journal bearings

    International Nuclear Information System (INIS)

    Rho, Byoung Hoo; Kim, Kyung Woong

    2002-01-01

    The purpose of the paper is to provide a procedure to calculate the noise of oil lubricated journal bearings. To do this, the nonlinear transient analysis of rotor-bearing system including rotor imbalance is performed. Acoustical properties of the bearing are investigated through frequency analysis of the pressure fluctuation of the fluid film calculated from the nonlinear analysis. Furthermore, a transmission theory of plane waves on a boundary of the outer surface of the bearing is used to obtain the sound pressure level of the bearing. Results show that the sound pressure level of the bearing can be increased with the rotational speed of the rotor although the whirl amplitude of the rotor is decreased at high speed. Noise estimating procedures presented in this paper could be an aid in the evaluation and understanding of acoustical properties of oil lubricated journal bearings

  8. Grizzly bears (Ursus arctos horribilis) and black bears (Ursus americanus) prevent trabecular bone loss during disuse (hibernation).

    Science.gov (United States)

    McGee-Lawrence, Meghan E; Wojda, Samantha J; Barlow, Lindsay N; Drummer, Thomas D; Castillo, Alesha B; Kennedy, Oran; Condon, Keith W; Auger, Janene; Black, Hal L; Nelson, O Lynne; Robbins, Charles T; Donahue, Seth W

    2009-12-01

    Disuse typically causes an imbalance in bone formation and bone resorption, leading to losses of cortical and trabecular bone. In contrast, bears maintain balanced intracortical remodeling and prevent cortical bone loss during disuse (hibernation). Trabecular bone, however, is more detrimentally affected than cortical bone in other animal models of disuse. Here we investigated the effects of hibernation on bone remodeling, architectural properties, and mineral density of grizzly bear (Ursus arctos horribilis) and black bear (Ursus americanus) trabecular bone in several skeletal locations. There were no differences in bone volume fraction or tissue mineral density between hibernating and active bears or between pre- and post-hibernation bears in the ilium, distal femur, or calcaneus. Though indices of cellular activity level (mineral apposition rate, osteoid thickness) decreased, trabecular bone resorption and formation indices remained balanced in hibernating grizzly bears. These data suggest that bears prevent bone loss during disuse by maintaining a balance between bone formation and bone resorption, which consequently preserves bone structure and strength. Further investigation of bone metabolism in hibernating bears may lead to the translation of mechanisms preventing disuse-induced bone loss in bears into novel treatments for osteoporosis.

  9. Prevalence of Trichinella spp. in black bears, grizzly bears, and wolves in the Dehcho Region, Northwest Territories, Canada, including the first report of T. nativa in a grizzly bear from Canada.

    Science.gov (United States)

    Larter, Nicholas C; Forbes, Lorry B; Elkin, Brett T; Allaire, Danny G

    2011-07-01

    Samples of muscle from 120 black bears (Ursus americanus), 11 grizzly bears (Ursus arctos), and 27 wolves (Canis lupus) collected in the Dehcho Region of the Northwest Territories from 2001 to 2010 were examined for the presence of Trichinella spp. larvae using a pepsin-HCl digestion assay. Trichinella spp. larvae were found in eight of 11 (73%) grizzly bears, 14 of 27 (52%) wolves, and seven of 120 (5.8%) black bears. The average age of positive grizzly bears, black bears, and wolves was 13.5, 9.9, and approximately 4 yr, respectively. Larvae from 11 wolves, six black bears, and seven grizzly bears were genotyped. Six wolves were infected with T. nativa and five with Trichinella T6, four black bears were infected with T. nativa and two with Trichinella T6, and all seven grizzly bears were infected with Trichinella T6 and one of them had a coinfection with T. nativa. This is the first report of T. nativa in a grizzly bear from Canada. Bears have been linked to trichinellosis outbreaks in humans in Canada, and black bears are a subsistence food source for residents of the Dehcho region. In order to assess food safety risk it is important to monitor the prevalence of Trichinella spp. in both species of bear and their cohabiting mammalian food sources.

  10. Hydrostatic and hybrid bearing design

    CERN Document Server

    Rowe, W B

    1983-01-01

    Hydrostatic and Hybrid Bearing Design is a 15-chapter book that focuses on the bearing design and testing. This book first describes the application of hydrostatic bearings, as well as the device pressure, flow, force, power, and temperature. Subsequent chapters discuss the load and flow rate of thrust pads; circuit design, flow control, load, and stiffness; and the basis of the design procedures and selection of tolerances. The specific types of bearings, their design, dynamics, and experimental methods and testing are also shown. This book will be very valuable to students of engineering des

  11. 49 CFR 229.69 - Side bearings.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Side bearings. 229.69 Section 229.69....69 Side bearings. (a) Friction side bearings with springs designed to carry weight may not have more than 25 percent of the springs in any one nest broken. (b) Friction side bearings may not be run in...

  12. Electron beam melting of bearing materials

    Energy Technology Data Exchange (ETDEWEB)

    Goldschmied, G.; Schuler, A. (Technische Univ., Vienna (Austria). Inst. fuer Allgemeine Elektrotechnik); Elsinger, G.; Koroschetz, F. (MIBA Gleitlager AG, Laakirchen (Austria)); Tschegg, E.K. (Technische Univ., Vienna (Austria). Inst. fuer Angewandte und Technische Physik)

    1990-06-01

    This paper reports on a surface treatment method for the bearing materials AlSn6 which permits the use of this material without the overlay usually required. Microstructural refinement is achieved by means of a surface melting technique using an electron beam with successive rapid solidification. Extremely fine tin precipitates are formed in the melted surface layer which lead to significantly better tribological properties of the bearing material. Tests compared the tribological properties for AlSn6 bearings treated by the surface melting technique with those of untreated bearings. Whereas all untreated bearings failed by seizure after only 2 h of testing, 30% of the tested bearings which had been surface melted survived the entire testing program without damage.

  13. Flywheel Challenge: HTS Magnetic Bearing

    International Nuclear Information System (INIS)

    Werfel, F N; Floegel-Delor, U; Riedel, T; Rothfeld, R; Wippich, D; Goebel, B

    2006-01-01

    A 200 mm cylindrical engineering prototype high temperature superconducting (HTS) was designed and fabricated. Measurements show that the 17 kg PM rotor can suspend safely 1000 kg in axial direction and 470 kg radially. The rationale for the bearing performance is to stabilize a 400 kg rotor of a new compact 5 kWh/280 kW flywheel energy storage system (COM - FESS). Measurements of the magnetic bearing force, stiffness and drag-torque are presented indicated the successful targeting a milestone in the HTS bearing technology. The influence of the PM configuration and the YBCO temperature on the bearing performance was experimentally studied, providing high-force or high-stiffness behaviour. The axial stiffness 5 kN/mm at 0.5 mm displacement is the highest value of a HTS bearing we know

  14. Eastern slopes grizzly bear project

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-01-01

    The cumulative effects of human activities on the grizzly bears in the central Canadian Rockies are not well known. As a result, a project was initiated in 1994 to address the urgent requirement for accurate scientific information on the habitat and populations of grizzly bears in the area of the Banff National Park and Kananaskis Country. This area is probably the most heavily used and developed area where the grizzly still survives. The information gathered throughout the course of this study will be used to better protect and manage the bears and other sensitive carnivores in the region. Using telemetry, researchers are monitoring 25 grizzly bears which were radio-collared in a 22,000 square-kilometer area in the upper Bow Valley drainage of the eastern Alberta slopes. The researchers involved in the project are working with representatives from Husky Oil and Talisman Energy on the sound development of the Moose Mountain oil and gas field without adversely affecting the grizzly bear population. Information collected over seven years indicated that the grizzly bears have few and infrequent offspring. Using the information gathered so far, the location of the Moose Mountain to Jumping Pound pipeline was carefully selected, since the bears recover very slowly from high mortality, and also considering that the food and cover had already been compromised by the high number of roads, trails and other human activities in the area. The status of the population and habitat of the grizzly bear will be assessed upon the conclusion of the field research phase in 2001. Models will be updated using the data obtained during eight years and will assist in the understanding of complex variables that affect grizzly bears.

  15. Conflict bear translocation: investigating population genetics and fate of bear translocation in Dachigam National Park, Jammu and Kashmir, India.

    Science.gov (United States)

    Mukesh; Sharma, Lalit Kumar; Charoo, Samina Amin; Sathyakumar, Sambandam

    2015-01-01

    The Asiatic black bear population in Dachigam landscape, Jammu and Kashmir is well recognized as one of the highest density bear populations in India. Increasing incidences of bear-human interactions and the resultant retaliatory killings by locals have become a serious threat to the survivorship of black bears in the Dachigam landscape. The Department of Wildlife Protection in Jammu and Kashmir has been translocating bears involved in conflicts, henceforth 'conflict bears' from different sites in Dachigam landscape to Dachigam National Park as a flagship activity to mitigate conflicts. We undertook this study to investigate the population genetics and the fate of bear translocation in Dachigam National Park. We identified 109 unique genotypes in an area of ca. 650 km2 and observed bear population under panmixia that showed sound genetic variability. Molecular tracking of translocated bears revealed that mostly bears (7 out of 11 bears) returned to their capture sites, possibly due to homing instincts or habituation to the high quality food available in agricultural croplands and orchards, while only four bears remained in Dachigam National Park after translocation. Results indicated that translocation success was most likely to be season dependent as bears translocated during spring and late autumn returned to their capture sites, perhaps due to the scarcity of food inside Dachigam National Park while bears translocated in summer remained in Dachigam National Park due to availability of surplus food resources. Thus, the current management practices of translocating conflict bears, without taking into account spatio-temporal variability of food resources in Dachigam landscape seemed to be ineffective in mitigating conflicts on a long-term basis. However, the study highlighted the importance of molecular tracking of bears to understand their movement patterns and socio-biology in tough terrains like Dachigam landscape.

  16. Conflict bear translocation: investigating population genetics and fate of bear translocation in Dachigam National Park, Jammu and Kashmir, India.

    Directory of Open Access Journals (Sweden)

    Mukesh

    Full Text Available The Asiatic black bear population in Dachigam landscape, Jammu and Kashmir is well recognized as one of the highest density bear populations in India. Increasing incidences of bear-human interactions and the resultant retaliatory killings by locals have become a serious threat to the survivorship of black bears in the Dachigam landscape. The Department of Wildlife Protection in Jammu and Kashmir has been translocating bears involved in conflicts, henceforth 'conflict bears' from different sites in Dachigam landscape to Dachigam National Park as a flagship activity to mitigate conflicts. We undertook this study to investigate the population genetics and the fate of bear translocation in Dachigam National Park. We identified 109 unique genotypes in an area of ca. 650 km2 and observed bear population under panmixia that showed sound genetic variability. Molecular tracking of translocated bears revealed that mostly bears (7 out of 11 bears returned to their capture sites, possibly due to homing instincts or habituation to the high quality food available in agricultural croplands and orchards, while only four bears remained in Dachigam National Park after translocation. Results indicated that translocation success was most likely to be season dependent as bears translocated during spring and late autumn returned to their capture sites, perhaps due to the scarcity of food inside Dachigam National Park while bears translocated in summer remained in Dachigam National Park due to availability of surplus food resources. Thus, the current management practices of translocating conflict bears, without taking into account spatio-temporal variability of food resources in Dachigam landscape seemed to be ineffective in mitigating conflicts on a long-term basis. However, the study highlighted the importance of molecular tracking of bears to understand their movement patterns and socio-biology in tough terrains like Dachigam landscape.

  17. The role of human outdoor recreation in shaping patterns of grizzly bear-black bear co-occurrence

    OpenAIRE

    Ladle, Andrew; Steenweg, Robin; Shepherd, Brenda; Boyce, Mark S.

    2018-01-01

    Species' distributions are influenced by a combination of landscape variables and biotic interactions with other species, including people. Grizzly bears and black bears are sympatric, competing omnivores that also share habitats with human recreationists. By adapting models for multi-species occupancy analysis, we analyzed trail camera data from 192 trail camera locations in and around Jasper National Park, Canada to estimate grizzly bear and black bear occurrence and intensity of trail use....

  18. The role of human outdoor recreation in shaping patterns of grizzly bear-black bear co-occurrence

    OpenAIRE

    Ladle, Andrew; Steenweg, Robin; Shepherd, Brenda; Boyce, Mark S.

    2018-01-01

    Species’ distributions are influenced by a combination of landscape variables and biotic interactions with other species, including people. Grizzly bears and black bears are sympatric, competing omnivores that also share habitats with human recreationists. By adapting models for multi-species occupancy analysis, we analyzed trail camera data from 192 trail camera locations in and around Jasper National Park, Canada to estimate grizzly bear and black bear occurrence and intensity of trail use....

  19. Load responsive hydrodynamic bearing

    Science.gov (United States)

    Kalsi, Manmohan S.; Somogyi, Dezso; Dietle, Lannie L.

    2002-01-01

    A load responsive hydrodynamic bearing is provided in the form of a thrust bearing or journal bearing for supporting, guiding and lubricating a relatively rotatable member to minimize wear thereof responsive to relative rotation under severe load. In the space between spaced relatively rotatable members and in the presence of a liquid or grease lubricant, one or more continuous ring shaped integral generally circular bearing bodies each define at least one dynamic surface and a plurality of support regions. Each of the support regions defines a static surface which is oriented in generally opposed relation with the dynamic surface for contact with one of the relatively rotatable members. A plurality of flexing regions are defined by the generally circular body of the bearing and are integral with and located between adjacent support regions. Each of the flexing regions has a first beam-like element being connected by an integral flexible hinge with one of the support regions and a second beam-like element having an integral flexible hinge connection with an adjacent support region. A least one local weakening geometry of the flexing region is located intermediate the first and second beam-like elements. In response to application of load from one of the relatively rotatable elements to the bearing, the beam-like elements and the local weakening geometry become flexed, causing the dynamic surface to deform and establish a hydrodynamic geometry for wedging lubricant into the dynamic interface.

  20. Diet and Co-ecology of Pleistocene Short-Faced Bears and Brown Bears in Eastern Beringia

    Science.gov (United States)

    Matheus, Paul E.

    1995-11-01

    Carbon and nitrogen stable isotope analysis of fossil bone collagen reveals that Pleistocene short-faced bears ( Arctodus simus) of Beringia were highly carnivorous, while contemporaneous brown bears ( Ursus arctos) had highly variable diets that included varying amounts of terrestrial vegetation, salmon, and small amounts of terrestrial meat. A reconsideration of the short-faced bear's highly derived morphology indicates that they foraged as scavengers of widely dispersed large mammal carcasses and were simultaneously designed both for highly efficient locomotion and for intimidating other large carnivores. This allowed Arctodus to forage economically over a large home range and seek out, procure, and defend carcasses from other large carnivores. The isotope data and this reconstruction of Arctodus' foraging behavior refute the hypothesis that competition from brown bears was a significant factor in the extinction of short-faced bears.

  1. Bearing Change to Metal-On-Polyethylene for Ceramic Bearing Fracture in Total Hip Arthroplasty; Does It Work?

    Science.gov (United States)

    Lee, Soong Joon; Kwak, Hong Suk; Yoo, Jeong Joon; Kim, Hee Joong

    2016-01-01

    We evaluated the short-term to midterm results of reoperation with bearing change to metal-on-polyethylene (MoP) after ceramic bearing fracture in ceramic-on-ceramic total hip arthroplasty. Nine third-generation ceramic bearing fractures (6 heads and 3 liners) were treated with bearing change to MoP. Mean age at reoperation was 52.7 years. Mean follow-up was 4.3 years. During follow-up, 2 of 3 liner-fractured hips and 1 of 6 head-fractured hips showed radiologic signs of metallosis and elevated serum chromium levels. Re-reoperation with bearing rechange to a ceramic head was performed for the hips with metallosis. One liner-fractured hip had periprosthetic joint infection. Dislocation occurred in 3 hips. From our experience, bearing change to MoP is not a recommended treatment option for ceramic bearing fracture in total hip arthroplasty. Copyright © 2016 Elsevier Inc. All rights reserved.

  2. Seismic isolation rubber bearings for nuclear facilities

    International Nuclear Information System (INIS)

    Fujita, Takafumi

    1991-01-01

    This paper describes results of biaxial breaking tests by compression and shear and by tension and shear for seismic isolation rubber bearings with bolted-type connections. The bearings used in the tests were low-damping rubber bearings, high-damping rubber bearings, and lead-rubber bearings. Three modes of failure of the bolted-type bearings were observed in the tests. They are the breaking failure by tension and shear; the breaking failure by compression and shear; and the buckling failure by compression and shear. The first and the second modes of failures are almost independent of the types and the sizes of the bearings. The breaking conditions of those failure modes are described in the axial-stress-shear-strain plane. This expression is useful for the evaluation of safety margins of the bearings. The paper outlines the basic design of the nuclear-grade bearings which were used for large-scale rubber bearing tests in a research project for seismic isolation of FBR plants. It also discusses the protection method against aging and the quality control which are important for implementation. (orig./HP)

  3. Seismic isolation rubber bearings for nuclear facilities

    International Nuclear Information System (INIS)

    Fujita, Takafumi

    1989-01-01

    This paper describes results of biaxial breaking tests by compression and shear and by tension and shear for seismic isolation rubber bearings with bolted-type connections. The bearings used in the tests were low-damping rubber bearings, high-damping rubber bearings, and lead-rubber bearings. Three modes of failure of the bolted-type bearings were observed in the tests. They are the breaking failure by tension and shear; the breaking failure by compression and shear; and the buckling failure by compression and shear. The first and the second modes of failures are almost independent of the types and the sizes of the bearings. The breaking conditions of those failure modes are described in the axial stress-shear strain plane. This expression is useful for the evaluation of safety margins of the bearings. The paper outlines the basic design of the nuclear-grade bearings which were used for large-scale rubber bearing tests in a research project for seismic isolation of fast breeder reactor (FBR) plants. The paper also discusses the protection method against aging and the quality control which are important for implementation

  4. Space Station alpha joint bearing

    Science.gov (United States)

    Everman, Michael R.; Jones, P. Alan; Spencer, Porter A.

    1987-01-01

    Perhaps the most critical structural system aboard the Space Station is the Solar Alpha Rotary Joint which helps align the power generation system with the sun. The joint must provide structural support and controlled rotation to the outboard transverse booms as well as power and data transfer across the joint. The Solar Alpha Rotary Joint is composed of two transition sections and an integral, large diameter bearing. Alpha joint bearing design presents a particularly interesting problem because of its large size and need for high reliability, stiffness, and on orbit maintability. The discrete roller bearing developed is a novel refinement to cam follower technology. It offers thermal compensation and ease of on-orbit maintenance that are not found in conventional rolling element bearings. How the bearing design evolved is summarized. Driving requirements are reviewed, alternative concepts assessed, and the selected design is described.

  5. Reduced Bearing Excursion After Mobile-Bearing Unicompartmental Knee Arthroplasty is Associated With Poor Functional Outcomes.

    Science.gov (United States)

    Wahal, Naman; Gaba, Sahil; Malhotra, Rajesh; Kumar, Vijay; Pegg, Elise C; Pandit, Hemant

    2018-02-01

    A small proportion of patients with mobile unicompartmental knee arthroplasty (UKA) report poor functional outcomes in spite of optimal component alignment on postoperative radiographs. The purpose of this study is to assess whether there is a correlation between functional outcome and knee kinematics. From a cohort of consecutive cases of 150 Oxford medial UKA, patients with fair/poor functional outcome at 1-year postsurgery (Oxford Knee Score [OKS] bearing position with knee flexion angle. Mean OKS in the fair/poor group was 29.9 and the mean OKS in the good/excellent group was 41.1. The tibial slope, time taken to complete the exercises, and patellar tendon angle trend over the flexion range were similar in both the groups; however, bearing position and the extent of bearing excursion differed significantly. The total bearing excursion in the OKS bearing was positioned 1.7 mm more posterior on the tibia in the OKS bearing excursion and positioning, are associated with worse functional outcomes after mobile UKA. Copyright © 2017 Elsevier Inc. All rights reserved.

  6. Rolling bearing analysis

    CERN Document Server

    Harris, Tedric A

    2001-01-01

    One of the most well-known experts in the field brings cutting-edge research to practitioners in the new edition of this important reference. Covers the improved mathematical calculations for rolling bearing endurance developed by the American Society of Mechanical Engineers and the Society of Lubrication and Tribology Engineers. Updated with new material on Condition-Based Maintenance, new testing methods, and new bearing materials.

  7. Modeling of Hybrid Permanent Magnetic-Gas Bearings

    DEFF Research Database (Denmark)

    Morosi, Stefano; Santos, Ilmar

    2009-01-01

    Modern turbomachinery applications require nowadays ever-growing rotational speeds and high degree of reliability. It then becomes natural to focus the attention of the research to contact-free bearings elements. The present alternatives focus on gas lubricated journal bearings or magnetic bearings....... In the present paper, a detailed mathematical modeling of the gas bearing based on the compressible form of the Reynolds equation is presented. Perturbation theory is applied in order to identify the dynamic characteristic of the bearing. Due to the simple design of the magnetic bearings elements - being...... the rotor equilibrium position can be made independent on the rotational speed and applied load; it becomes function of the passive magnetic bearing offset. By adjusting the offset it is possible to significantly influence the dynamic coefficients of the hybrid bearing....

  8. A motor with superconducting magnetic bearings

    International Nuclear Information System (INIS)

    Gladun, A.; Stoye, P.; Verges, P.; Gawalek, W.; Habisreuther, T.; Goernert, P.

    1993-01-01

    Superconducting bearings may be one of the most promising near term applications of HTSC. For use at liquid nitrogen temperature and below, they offer the advantage of lower energy consumption and higher reliability. Different bearing configurations have been proposed. But in order to substitute for conventional bearings a further increase in the critical current density of the superconductor and improved bearing concepts are necessary. For this it is necessary to take into account the peculiarities of the interaction between permanent magnets and bulk superconductors. As a contribution to this programme we present the model of a motor with superconducting magnetic bearings. (orig.)

  9. Valve assembly having remotely replaceable bearings

    International Nuclear Information System (INIS)

    Johnson, E.R.; Tanner, D.E.

    1980-01-01

    A valve assembly having remotely replaceable bearings is disclosed wherein a valve disc is supported within a flow duct for rotation about a pair of axially aligned bearings, one of which is carried by a spindle received within a diametral bore in the valve disc, and the other of which is carried by a bearing support block releasably mounted on the duct circumferentially of an annular collar on the valve disc coaxial with its diametrical bore. The spindle and bearing support block are adapted for remote removal to facilitate servicing or replacement of the valve disc support bearings

  10. Xylitol gummy bear snacks: a school-based randomized clinical trial

    Directory of Open Access Journals (Sweden)

    Roberts Marilyn C

    2008-07-01

    Full Text Available Abstract Background Habitual consumption of xylitol reduces mutans streptococci (MS levels but the effect on Lactobacillus spp. is less clear. Reduction is dependent on daily dose and frequency of consumption. For xylitol to be successfully used in prevention programs to reduce MS and prevent caries, effective xylitol delivery methods must be identified. This study examines the response of MS, specifically S. mutans/sobrinus and Lactobacillus spp., levels to xylitol delivered via gummy bears at optimal exposures. Methods Children, first to fifth grade (n = 154, from two elementary schools in rural Washington State, USA, were randomized to xylitol 15.6 g/day (X16, n = 53 or 11.7 g/day (X12, n = 49, or maltitol 44.7 g/day (M45, n = 52. Gummy bear snacks were pre-packaged in unit-doses, labeled with ID numbers, and distributed three times/day during school hours. No snacks were sent home. Plaque was sampled at baseline and six weeks and cultured on modified Mitis Salivarius agar for S. mutans/sobrinus and Rogosa SL agar for Lactobacillus spp. enumeration. Results There were no differences in S. mutans/sobrinus and Lactobacillus spp. levels in plaque between the groups at baseline. At six weeks, log10 S. mutans/sobrinus levels showed significant reductions for all groups (p = 0.0001: X16 = 1.13 (SD = 1.65; X12 = 0.89 (SD = 1.11; M45 = 0.91 (SD = 1.46. Reductions were not statistically different between groups. Results for Lactobacillus spp. were mixed. Group X16 and M45 showed 0.31 (SD = 2.35, and 0.52 (SD = 2.41 log10 reductions, respectively, while X12 showed a 0.11 (SD = 2.26 log10 increase. These changes were not significant. Post-study discussions with school staff indicated that it is feasible to implement an in-classroom gummy bear snack program. Parents are accepting and children willing to consume gummy bear snacks daily. Conclusion Reductions in S. mutans/sobrinus levels were observed after six weeks of gummy bear snack consumption

  11. The same difference: Jesusa Palancares and Poppie Nongena’s testimonies of oppression

    Directory of Open Access Journals (Sweden)

    M. Wenzel

    1994-05-01

    Full Text Available Two women's texts from postcolonial countries, Mexico and South Africa, on different continents show surprising correspondences in subject matter and style. Elena Poniatowska’s Hasta no verte Jesús mío (Till I meet you, my Jesus and Elsa Joubert's Die swerfjare van Poppie Nongena (The journey of Poppie Nongena examples of testimonial writing, both address issues of gender and politics in an innovative way. They combine autobiography and biography to render a dramatic account of social injustice despite their disparate backgrounds/cultures and subtle differences in style. In comparison, the texts not only affirm the validity of women’s writing and contribute to its enrichment, but also constitute a valuable contribution towards the formulation of a general feminist aesthetics. In fact, they illustrate conclusively that comparative literature fulfils a vital function in the exploration and interpretation of women's literature from different cultures.

  12. Transient response of two lobe aerodynamic journal bearing

    Directory of Open Access Journals (Sweden)

    Saurabh Kumar Yadav

    2018-03-01

    Full Text Available The dynamic behavior of a rotor-dynamic system is greatly affected by the performance of aerodynamic bearing and the performance of bearing is characterized by the stiffness and damping coefficients. In the present work, stiffness and damping coefficients of bearing are computed and the performance of the bearing is greatly changed with the change in bearing air film profile. The effect of lobe offset factors on the transient performance of aerodynamic bearing is presented. Bifurcation and Poincare diagrams of two lobe journal bearing have been presented for different offset factors. A bearing designer can judge the bearing performance based on bifurcation diagrams.

  13. Servo Reduces Friction In Flexure Bearing

    Science.gov (United States)

    Clingman, W. Dean

    1991-01-01

    Proposed servocontrol device reduces such resistive torques as stiction, friction, ripple, and cogging in flexure bearing described in LAR-14348, "Flexure Bearing Reduces Startup Friction". Reduces frictional "bump" torque encountered when bearing ball runs into buildup of grease on bearing race. Also used as cable follower to reduce torque caused by cable and hoses when they bend because of motion of bearing. New device includes torquer across ball race. Torquer controlled by servo striving to keep flexure at null, removing torque to outer ring. In effect, device is inner control loop reducing friction, but does not control platforms or any outer-control-loop functions.

  14. The effect of external dynamic loads on the lifetime of rolling element bearings: accurate measurement of the bearing behaviour

    International Nuclear Information System (INIS)

    Jacobs, W; Boonen, R; Sas, P; Moens, D

    2012-01-01

    Accurate prediction of the lifetime of rolling element bearings is a crucial step towards a reliable design of many rotating machines. Recent research emphasizes an important influence of external dynamic loads on the lifetime of bearings. However, most lifetime calculations of bearings are based on the classical ISO 281 standard, neglecting this influence. For bearings subjected to highly varying loads, this leads to inaccurate estimations of the lifetime, and therefore excessive safety factors during the design and unexpected failures during operation. This paper presents a novel test rig, developed to analyse the behaviour of rolling element bearings subjected to highly varying loads. Since bearings are very precise machine components, their motion can only be measured in an accurately controlled environment. Otherwise, noise from other components and external influences such as temperature variations will dominate the measurements. The test rig is optimised to perform accurate measurements of the bearing behaviour. Also, the test bearing is fitted in a modular structure, which guarantees precise mounting and allows testing different types and sizes of bearings. Finally, a fully controlled multi-axial static and dynamic load is imposed on the bearing, while its behaviour is monitored with capacitive proximity probes.

  15. Journal of Earth System Science | Indian Academy of Sciences

    Indian Academy of Sciences (India)

    Sumer and Mawmaram conglomerates bear the testimony of broadly flattening type of deformation (0 > > 1) while Nongkhya conglomerate shows constriction type (1 > > ). The change in strain ellipsoid shape from Nongkhya to Mawmaram area is accompanied by a change of fabric from > to > tectonites.

  16. Sex-biased natal dispersal and inbreeding avoidance in American black bears as revealed by spatial genetic analyses.

    Science.gov (United States)

    Costello, Cecily M; Creel, Scott R; Kalinowski, Steven T; Vu, Ninh V; Quigley, Howard B

    2008-11-01

    We tested the hypothesis that sex-biased natal dispersal reduces close inbreeding in American black bears, a solitary species that exhibits nearly complete male dispersal and female philopatry. Using microsatellite DNA and spatial data from reproductively mature bears (>or= 4 years old), we examined the spatial genetic structure of two distinct populations in New Mexico from 1993 to 2000. As predicted, relatedness (r) and the frequency of close relationships (parent-offspring or full siblings) decreased with distance among female dyads, but little change was observed among male or opposite-sex dyads. Neighbouring females were more closely related than neighbouring males. The potential for inbreeding was low. Most opposite-sex pairs that lived sufficiently close to facilitate mating were unrelated, and few were close relatives. We found no evidence that bears actively avoided inbreeding in their selection of mates from this nearby pool, as mean r and relationship frequencies did not differ between potential and actual mating pairs (determined by parentage analysis). These basic patterns were apparent in both study areas despite a nearly two-fold difference in density. However, the sex bias in dispersal was less pronounced in the lower-density area, based on proportions of bears with male and female relatives residing nearby. This result suggests that male bears may respond to reduced competition by decreasing their rate or distance of dispersal. Evidence supports the hypothesis that inbreeding avoidance is achieved by means of male-biased dispersal but also indicates that competition (for mates or resources) modifies dispersal patterns.

  17. A prototype construction of bearing heater system

    International Nuclear Information System (INIS)

    Firman Silitonga

    2007-01-01

    A bearing heater system has been successfully constructed using transformer-like method of 1000 VA power, 220 V primary voltage, and 50 Hz electrical frequency. The bearing heater consists of primary coil 230 turns, U type and bar-type iron core with 36 cm 2 , 9 cm 2 ,and 3 cm 2 cross-section, and electrical isolation. The bearing heater is used to enlarge the diameter of the bearing so that it can be easily fixed on an electric motor shaft during replacement because the heating is conducted by treated the bearing as a secondary coil of a transformer. This bearing heater can be used for bearing with 3 and 6 cm of inner diameter and 12 cm of maximum outside diameter. (author)

  18. Roller bearing geometry design

    Science.gov (United States)

    Savage, M.; Pinkston, B. H. W.

    1976-01-01

    A theory of kinematic stabilization of rolling cylinders is extended and applied to the design of cylindrical roller bearings. The kinematic stabilization mechanism puts a reverse skew into the rolling elements by changing the roller taper. Twelve basic bearing modification designs are identified amd modeled. Four have single transverse convex curvature in their rollers while eight have rollers which have compound transverse curvature made up of a central cylindrical band surrounded by symmetric bands with slope and transverse curvature. The bearing designs are modeled for restoring torque per unit axial displacement, contact stress capacity, and contact area including dynamic loading, misalignment sensitivity and roller proportion. Design programs are available which size the single transverse curvature roller designs for a series of roller slopes and load separations and which design the compound roller bearings for a series of slopes and transverse radii of curvature. The compound rollers are proportioned to have equal contact stresses and minimum size. Design examples are also given.

  19. Parenting children with Proteus syndrome: experiences with, and adaptation to, courtesy stigma.

    Science.gov (United States)

    Turner, Joyce; Biesecker, Barbara; Leib, Jennifer; Biesecker, Leslie; Peters, Kathryn F

    2007-09-15

    Courtesy stigma refers to the stigmatization an unaffected person experiences due to his or her relationship with a person who bears a stigma. Parents of children with genetic conditions are particularly vulnerable to courtesy stigma, but little research has been done to explore this phenomenon. The purpose of this study was to investigate the courtesy stigma experiences of parents of children with Proteus syndrome (PS) and related overgrowth conditions. Thematic analysis of transcripts from 31 parents identified three distinct themes: stigma experiences, social-emotional reactions to stigmatizing encounters, and coping responses. Four types of stigmatizing experiences were identified: intrusive inquires, staring and pointing, devaluing remarks, and social withdrawal. Additionally, we uncovered eight strategies parents used to cope with courtesy stigma: attributing cause, assigning meaning to social exchanges, concealing, withdrawing socially, taking the offensive, employing indifference, instructing and learning from family, and educating others. Parents' choices of strategy type were found to be context dependent and evolved over time. This is the first study to document the adaptive evolution of coping strategies to offset courtesy stigma by parents of children with genetic conditions. These results provide groundwork for genetic counseling interventions aimed at addressing issues of courtesy stigma and further investigation of the phenomenon itself. (c) 2007 Wiley-Liss, Inc.

  20. Gear bearing drive

    Science.gov (United States)

    Mavroidis, Constantinos (Inventor); Vranish, John M. (Inventor); Weinberg, Brian (Inventor)

    2011-01-01

    A gear bearing drive provides a compact mechanism that operates as an actuator providing torque and as a joint providing support. The drive includes a gear arrangement integrating an external rotor DC motor within a sun gear. Locking surfaces maintain the components of the drive in alignment and provide support for axial loads and moments. The gear bearing drive has a variety of applications, including as a joint in robotic arms and prosthetic limbs.

  1. The Effect of Non-Circular Bearing Shapes in Hydrodynamic Journal Bearings on the Vibration Behavior of Turbocharger Structures

    Directory of Open Access Journals (Sweden)

    Lukas Bernhauser

    2017-03-01

    Full Text Available Increasing quality demands of combustion engines require, amongst others, improvements of the engine’s acoustics and all (subcomponents mounted to the latter. A significant impact to the audible tonal noise spectrum results from the vibratory motions of fast-rotating turbocharger rotor systems in multiple hydrodynamic bearings such as floating bearing rings. Particularly, the study of self-excited non-linear vibrations of the rotor-bearing systems is crucial for the understanding, prevention or reduction of the noise and, consequently, for a sustainable engine acoustics development. This work presents an efficient modeling approach for the investigation, optimization, and design improvement of complex turbocharger rotors in hydrodynamic journal bearings, including floating bearing rings with circular and non-circular bearing geometries. The capability of tonal non-synchronous vibration prevention using non-circular bearing shapes is demonstrated with dynamic run-up simulations of the presented model. These findings and the performance of our model are compared and validated with results of a classical Laval/Jeffcott rotor-bearing model and a specific turbocharger model found in the literature. It is shown that the presented simulation method yields fast and accurate results and furthermore, that non-circular bearing shapes are an effective measure to reduce or even prevent self-excited tonal noise.

  2. LIGHT-WEIGHT LOAD-BEARING STRUCTURE

    DEFF Research Database (Denmark)

    2009-01-01

    The invention relates to a light-weight load-bearing structure (1) with optimized compression zone (2), where along one or more compression zones (2) in the structure (1) to be cast a core (3) of strong concrete is provided, which core (3) is surrounded by concrete of less strength (4) compared...... to the core (3) of strong concrete. The invention also relates to a method of casting of light-weight load-bearing structures (1) with optimized compression zone (2) where one or more channels, grooves, ducts, pipes and/or hoses (5) formed in the load-bearing structure (1) serves as moulds for moulding one...... or more cores (3) of strong concrete in the light-weight load-bearing structure (1)....

  3. Development and Evaluation of Titanium Spacesuit Bearings

    Science.gov (United States)

    Rhodes, Richard; Battisti, Brian; Ytuarte, Raymond, Jr.; Schultz, Bradley

    2016-01-01

    The Z-2 Prototype Planetary Extravehicular Space Suit Assembly is a continuation of NASA's Z-series of spacesuits, designed with the intent of meeting a wide variety of exploration mission objectives, including human exploration of the Martian surface. Incorporating titanium bearings into the Z-series space suit architecture allows us to reduce mass by an estimated 23 lbs per suit system compared to the previously used stainless steel bearing race designs, without compromising suit functionality. There are two obstacles to overcome when using titanium for a bearing race- 1) titanium is flammable when exposed to the oxygen wetted environment inside the space suit and 2) titanium's poor wear properties are often challenging to overcome in tribology applications. In order to evaluate the ignitability of a titanium space suit bearing, a series of tests were conducted at White Sands Test Facility (WSTF) that introduced the bearings to an extreme test profile, with multiple failures imbedded into the test bearings. The testing showed no signs of ignition in the most extreme test cases; however, substantial wear of the bearing races was observed. In order to design a bearing that can last an entire exploration mission (approx. 3 years), design parameters for maximum contact stress need to be identified. To identify these design parameters, bearing test rigs were developed that allow for the quick evaluation of various bearing ball loads, ball diameters, lubricants, and surface treatments. This test data will allow designers to minimize the titanium bearing mass for a specific material and lubricant combination and design around a cycle life requirement for an exploration mission. This paper reviews the current research and testing that has been performed on titanium bearing races to evaluate the use of such materials in an enriched oxygen environment and to optimize the bearing assembly mass and tribological properties to accommodate for the high bearing cycle life for an

  4. The thermodynamic properties of a new type catcher bearing used in active magnetic bearings system

    International Nuclear Information System (INIS)

    Jin, Chaowu; Zhu, Yili; Xu, Longxiang; Xu, Yuanping; Zheng, Yantong

    2015-01-01

    Normally a rotor levitated by active magnetic bearings (AMBs) system would rotate without contacting with any stator component, but the possibility still remains that the supporting force might lose temporarily or permanently, thus requiring the Catcher bearings (CBs) to provide backup protection in case of the failure of AMBs. A new type CB with two separate rolling element bearing series could have the speed distribution between the inner race and intermediate race according to certain ratio, in which the speed of each roller element bearing decreases with the limit speed of the whole CB increasing, offering high capability to sustain its initial rotation speed. Based on the theory of heat transfer, tribology, and rotor dynamics, this paper analyzes the thermal structure of double-decker catcher bearing (DDCB) and single-decker catcher bearing (SDCB), respectively. Through this structure, the thermal resistances and equations of heat transfer can be obtained. Then we calculate the friction heat and temperature distribution in the various CBs upon rotor's dropping on SDCB or DDCB, followed by the discussion on the CBs temperature rise's effects on lubrication conditions and rotor dynamics parameters. Finally various experiments are carried out to measure the temperature rise of different CBs. The results obtained validate the theoretical analysis and also provide main methods to reduce heat generation. Using DDCB is proved to be effective to reduce the temperature rise. - Highlights: • The DDCB is a more suitable catcher bearing for AMBs. • Compared to SDCB, using DDCB, the temperature rise can decrease in the same states. • A lower viscosity of lubricant may induce a lower temperature rise. • The inner raceway temperature of the first layer bearing is the highest. • Reducing the unbalance mass of the rotor is a method to decrease the temperature rise

  5. Noise estimation of oil lubricated journal bearings

    International Nuclear Information System (INIS)

    Rho, Byoung Hoo; Kim, Kyung Woong

    2003-01-01

    Noise estimating procedures of oil lubricated journal bearings are presented. Nonlinear analysis of rotor-bearing system including unbalance mass of the rotor is performed in order to obtain acoustical properties of the bearing. Acoustical properties of the bearing are investigated through frequency analysis of the pressure fluctuation of the fluid film calculated from the nonlinear analysis. Noise estimating procedures presented in this paper could aid in the evaluation and understanding of acoustical properties of oil lubricated journal bearings

  6. Individual effects of seasonal changes, visitor density, and concurrent bear behavior on stereotypical behaviors in captive polar bears (Ursus maritimus).

    Science.gov (United States)

    Kelly, Krista R; Harrison, Michelle L; Size, Daniele D; MacDonald, Suzanne E

    2015-01-01

    Stereotypical behaviors in captive polar bears (Ursus maritimus) can be detrimental to their welfare. These behaviors can be reduced through enrichment programs but are often not completely eliminated, so identifying potential triggers is important. The present study investigated the influences of seasonal changes, visitor density, and concurrent bear activity on stereotypical behaviors exhibited by 3 captive polar bears at the Toronto Zoo. All bears exhibited these behaviors; however, individual differences were found in duration and form. The male exhibited less stereotypical behavior during spring, and the females exhibited less stereotypical behavior during winter. An increase in visitor density was associated with more stereotypical behavior in 1 female but less stereotypical behavior in the other 2 bears. All bears engaged in more stereotypical behaviors when the other bears were inactive, and 1 female engaged in more stereotypical behaviors when the other bears were out of sight. Further, when conspecifics were active, all bears engaged in less stereotypical behaviors. Given the variability among individual bears, future enrichment programs must be tailored to the needs of individuals to maximize efficacy.

  7. 49 CFR 229.64 - Plain bearings.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Plain bearings. 229.64 Section 229.64 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL RAILROAD ADMINISTRATION....64 Plain bearings. A plain bearing box shall contain visible free oil and may not be cracked to the...

  8. A Swedish interview study: parents' assessment of risks in home births.

    Science.gov (United States)

    Lindgren, Helena; Hildingsson, Ingegerd; Rådestad, Ingela

    2006-03-01

    to describe home-birth risk assessment by parents. interviews using a semi-structured interview guide. Data were analysed using a phenomenological approach. independent midwifery practices in Sweden. five couples who had had planned home births. the parents had a fundamental trust that the birth would take place without complications, and they experienced meaningfulness in the event itself. Risks were considered to be part of a complex phenomenon that was not limited to births at home. This attitude seems to be part of a lifestyle that has a bearing on how risks experienced during the birth were handled. Five categories were identified as counterbalancing the risk of possible complications: (1) trust in the woman's ability to give birth; (2) trust in intuition; (3) confidence in the midwife; (4) confidence in the relationship; and (5) physical and intellectual preparation. although the parents were conscious of the risk of complications during childbirth, a fundamental trust in the woman's independent ability to give birth was central to the decision to choose a home birth. Importance was attached to the expected positive effects of having the birth at home. knowledge of parents' assessment can promote an increased understanding of how parents-to-be experience the risks associated with home birth.

  9. Ceramic Rail-Race Ball Bearings

    Science.gov (United States)

    Balzer, Mark A.; Mungas, Greg S.; Peters, Gregory H.

    2010-01-01

    Non-lubricated ball bearings featuring rail races have been proposed for use in mechanisms that are required to function in the presence of mineral dust particles in very low-pressure, dry environments with extended life. Like a conventional ball bearing, the proposed bearing would include an inner and an outer ring separated by balls in rolling contact with the races. However, unlike a conventional ball bearing, the balls would not roll in semi-circular or gothic arch race grooves in the rings: instead, the races would be shaped to form two or more rails (see figure). During operation, the motion of the balls would push dust particles into the spaces between the rails where the particles could not generate rolling resistance for the balls

  10. Identification of Bearing Failure Using Signal Vibrations

    Science.gov (United States)

    Yani, Irsyadi; Resti, Yulia; Burlian, Firmansyah

    2018-04-01

    Vibration analysis can be used to identify damage to mechanical systems such as journal bearings. Identification of failure can be done by observing the resulting vibration spectrum by measuring the vibration signal occurring in a mechanical system Bearing is one of the engine elements commonly used in mechanical systems. The main purpose of this research is to monitor the bearing condition and to identify bearing failure on a mechanical system by observing the resulting vibration. Data collection techniques based on recordings of sound caused by the vibration of the mechanical system were used in this study, then created a database system based bearing failure due to vibration signal recording sounds on a mechanical system The next step is to group the bearing damage by type based on the databases obtained. The results show the percentage of success in identifying bearing damage is 98 %.

  11. Management of brown bears (Ursus arctos) in Europe.

    OpenAIRE

    Klenzendorf, Sybille A.

    1997-01-01

    Management of Brown Bears (Ursus arctos) in Europe. Sybille A. Klenzendorf (Abstract) Successful conservation of brown bears (Ursus arctos) in Europe is associated with public acceptance of damages caused by bears. Recent increases in sheep depredation and beehive damage in central Austria resulted in the deaths of two bears there. Since bear numbers are low in most European populations, alternatives to the elimination of problem bears associated with dam...

  12. Conservation of brown bear in the Alps: space use and settlement behavior of reintroduced bears

    Science.gov (United States)

    Preatoni, Damiano; Mustoni, Andrea; Martinoli, Adriano; Carlini, Eugenio; Chiarenzi, Barbara; Chiozzini, Simonetta; Van Dongen, Stefan; Wauters, Luc A.; Tosi, Guido

    2005-11-01

    Large carnivores typically need large home ranges containing habitats patches of different quality. Consequently, their conservation requires habitat protection and management at the landscape scale. In some cases, reintroduction might be used to support remnant or restore extinct populations. This is the case for the brown bear ( Ursus arctos) in the Italian Alps. We monitored spacing behavior and settlement of reintroduced brown bears in Adamello-Brenta Natural Park, North-Italy, using radio-tracking. Habitat use, dispersion and survival were studied to evaluate the success of reintroduction and possible conflicts with man. All three males and five of seven females settled in the study area. Most bears roamed widely the first months after release, exploring the new habitat. Patterns of home range overlap between seasons and years revealed that home range use stabilized the year after first hibernation. Home ranges were larger in the mating season (May-July) than in spring or autumn. Home ranges varied between 34 and 1813 km 2 the year after release, but core-areas, where feeding activity was concentrated, were much smaller. Some bears had exclusive core-areas in summer and autumn, but most showed considerable core-area overlap with animals of the same and/or the opposite sex. Bears selected deciduous forests, mixed and conifer forests were used according to availability, and areas with anthropogenic disturbance were avoided. Most bears settled and some reproduced successfully at the release site, causing high initial population growth, suggesting that reintroduction can help to re-establish a brown bear population in the Italian Alps.

  13. 36 CFR 73.9 - World Heritage criteria.

    Science.gov (United States)

    2010-07-01

    ...-planning or landscape design; or (iii) Bear a unique or at least exceptional testimony to a cultural... landforms, or significant geomorphic or physiographic features; or (ii) Be outstanding examples representing..., fresh water, coastal and marine ecosystems and communities of plants and animals; or (iii) Contain...

  14. Difference of ore-bearing and non-ore-bearing pegmatite in the Guangshigou area and its research significance

    International Nuclear Information System (INIS)

    Zuo Wenqian; Zhang Zhanshi; Sha Yazhou; Rao Chaojun

    2011-01-01

    Guangshigou uranium deposit is one of the typical granite-pegmatite uranium deposits in China, the ore-body are located in the density zone of the outside contact zone of granite pluton. To distinguish the ore-bearing and Non-ore-bearing pegmatite is one of the most practices and have great significance for the effect of mineral exploration. Based on the field investigation and former research results, contrast research on the characteristics of the pegmatite on petrology, geophysical, geochemistry and stable isotopes have been carried out. It is pointed out that the ore-bearing pegmatite differ from the non-ore-bearing one from macro-and-micro-view in Guangshigou Uranium deposits, the main characteristics are summarized; the macro-and-micro signs are established, the genetic difference between the ore-bearing and non-ore-bearing pegmatite are discussed primarily. The achievements would be helpful for prospecting and researching of this type uranium deposits in China. (authors)

  15. Accuracy of Spindle Units with Hydrostatic Bearings

    Directory of Open Access Journals (Sweden)

    Fedorynenko Dmytro

    2016-06-01

    Full Text Available The work is devoted to the research of precision regularities in a spindle unit by the trajectory of the spindle installed on hydrostatic bearings. The mathematical model of trajectories spindle with lumped parameters that allows to define the position of the spindle with regard the simultaneous influence of design parameters, geometrical deviations ofform, temperature deformation bearing surfaces, the random nature of operational parameters and technical loads of hydrostatic bearings has been developed. Based on the results of numerical modeling the influence of shape errors of bearing surface of hydrostatic bearing on the statistical characteristics of the radius vector trajectories of the spindle by varying the values rotational speed of the spindle and oil pressure in front hydrostatic bearing has been developed. The obtained statistical regularities of precision spindle unit have been confirmed experimentally. It has been shown that an effective way to increase the precision of spindle units is to regulate the size of the gap in hydrostatic spindle bearings. The new design of an adjustable hydrostatic bearing, which can improve the accuracy of regulation size gap has been proposed.

  16. 36 CFR 13.1236 - Bear orientation.

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false Bear orientation. 13.1236 Section 13.1236 Parks, Forests, and Public Property NATIONAL PARK SERVICE, DEPARTMENT OF THE INTERIOR... Developed Area § 13.1236 Bear orientation. All persons visiting the BCDA must receive an NPS-approved Bear...

  17. 14 CFR 29.623 - Bearing factors.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Bearing factors. 29.623 Section 29.623... STANDARDS: TRANSPORT CATEGORY ROTORCRAFT Design and Construction General § 29.623 Bearing factors. (a... subject to pounding or vibration, must have a bearing factor large enough to provide for the effects of...

  18. Testimony, Memory and Solidarity across National Borders: Paul Ricoeur and Transnational Feminism

    Directory of Open Access Journals (Sweden)

    Elizabeth Purcell

    2017-07-01

    Full Text Available In many ways, globalization created the problem of representation for feminist solidarity across the borders of the nation state. This problem is one of presenting a cohesive identity for representation in the transnational public sphere. This paper proposes a solution to this problem of a cohesive identity for women’s representation by drawing on the work of Paul Ricœur. What these women seem to have in common are shared political aims, but they have no basis for those aims. This paper provides a basis for these aims by turning to Ricœur’s work on collective memory from Memory, History, Forgetting. The paper concludes that it is the shared testimony through narrative hospitality, which can provide a foundation for a social bond for those with common political aims. More specifically, this common knowledge provides a justification for the representation of women and their allies in the transnational public sphere.

  19. In aftermath of financial investigation Phoenix VA employee demoted after her testimony

    Directory of Open Access Journals (Sweden)

    Robbins RA

    2013-03-01

    Full Text Available No abstract available. Article truncated after 150 words. A previous Southwest Journal of Pulmonary and Critical Care Journal editorial commented on fiscal mismanagement at the Department of Veterans Affairs (VA Medical Center in Phoenix (1. Now Paula Pedene, the former Phoenix VA public affairs officer, claims she was demoted for testimony she gave to the VA Inspector General’s Office (OIG regarding that investigation (2. In 2011, the OIG investigated the Phoenix VA for excess spending on private care of patients (3. The report blamed systemic failures for controls so weak that $56 million in medical fees were paid during 2010 without adequate review. The report particularly focused on one clinician assigned by the Chief of Staff to review hundreds of requests per week and the intensive care unit physicians for transferring patients to chronic ventilator units (1,3. After the investigation, the director and one of the associate directors left the VA and the chief of staff was promoted …

  20. [Advances in studies on bear bile powder].

    Science.gov (United States)

    Zhou, Chao-fan; Gao, Guo-jian; Liu, Ying

    2015-04-01

    In this paper, a detailed analysis was made on relevant literatures about bear bile powder in terms of chemical component, pharmacological effect and clinical efficacy, indicating bear bile powder's significant pharmacological effects and clinical application in treating various diseases. Due to the complex composition, bear bile powder is relatively toxic. Therefore, efforts shall be made to study bear bile powder's pharmacological effects, clinical application, chemical composition and toxic side-effects, with the aim to provide a scientific basis for widespread reasonable clinical application of bear bile powder.

  1. Magnetically leviated superconducting bearing

    Science.gov (United States)

    Weinberger, Bernard R.; Lynds, Jr., Lahmer

    1993-01-01

    A magnetically levitated superconducting bearing includes a magnet (2) mounted on a shaft (12) that is rotatable around an axis of rotation and a Type II superconductor (6) supported on a stator (14) in proximity to the magnet (2). The superconductor (6) is positioned so that when it is cooled to its superconducting state in the presence of a magnetic field, it interacts with the magnet (2) to produce an attractive force that levitates the magnet (2) and supports a load on the shaft (12). The interaction between the superconductor (6) and magnet(2) also produces surface screening currents (8) that generate a repulsive force perpendicular to the load. The bearing also has means for maintaining the superconductor at a temperature below its critical temperature (16, 18). The bearing could also be constructed so the magnet (2) is supported on the stator (14) and the superconductor (6) is mounted on the shaft (12). The bearing can be operated by cooling the superconductor (6) to its superconducting state in the presence of a magnetic field.

  2. Prevention of Filipino Youth Behavioral Health Disparities: Identifying Barriers and Facilitators to Participating in “Incredible Years,” an Evidence-Based Parenting Intervention, Los Angeles, California, 2012

    Science.gov (United States)

    Flores, Nicole; Supan, Jocelyn; Kreutzer, Cary B.; Samson, Allan; Coffey, Dean M.

    2015-01-01

    Introduction Evidence-based interventions for training parents are proven to prevent onset and escalation of childhood mental health problems. However, participation in such programs is low, especially among hard-to-reach, underserved populations such as Filipino Americans. Filipinos, the largest Asian subgroup in California, have significant behavioral health disparities compared with non-Hispanic whites and other Asian subgroups. The purpose of this study was to learn about Filipinos’ barriers and facilitators to participating in “Incredible Years” (IY), a parenting program. Methods We conducted 4 focus groups in Los Angeles, California, in 2012; the groups consisted of 20 Filipino parents of children aged 6 to 12 years who recently completed the IY parenting program, which was offered as a prevention workshop. Three reviewers, including two co-authors (A.S., J.J.) and a research assistant used content analysis to independently code the interview transcripts and extract subthemes. Grounded theory analytic methods were used to analyze interview transcripts. Results Parents’ perceived benefits of participation in IY were learning more effective parenting techniques, networking with other parents, improved spousal relationships, and improvements in their children's behavior. Parents’ most common motivating factor for enrollment in IY was to improve their parenting skills and their relationships with their children. The most common barriers to participation were being uncomfortable sharing problems with others and the fear of being stigmatized by others judging their parenting skills. Participants said that parent testimonials would be the most effective way to promote IY. Many recommended outreach at schools, pediatricians’ offices, and churches. Conclusion Increasing Filipino American parent enrollment in IY in culturally relevant ways will reduce the incidence of mental health disorders among children in this growing population. PMID:26491813

  3. A theoretical-experimental study of backup bearings

    DEFF Research Database (Denmark)

    Lampe Linhares da Fonseca, Cesar Augusto

    of two types of backup bearings, which are investigated experimentally and theoretically. The first type is a conventional ball bearing commonly used in industrial applications. The second is an unconventional bearing that, which contains pins inside the clearance for the rotor to impact on. The main...... both types of bearings for further investigation. Also, a full failure of the control and a rotor drop on the ball bearing as backup bearing is investigated by removing the magnetic forces. The nonlinear features of the dynamics of the rotor are assessed for different levels of unbalance. It has been...... radial forces. Remaining in this condition, it may lead to permanent damage or total failure of the machine. This is why the backup bearing design has to be carefully planned and investigated as to whether it helps to protect the integrity of the machine. This PhD thesis provides a comprehensive study...

  4. The sensitivity of computed tomography (CT) scans in detecting trauma: are CT scans reliable enough for courtroom testimony?

    Science.gov (United States)

    Molina, D Kimberley; Nichols, Joanna J; Dimaio, Vincent J M

    2007-09-01

    Rapid and accurate recognition of traumatic injuries is extremely important in emergency room and surgical settings. Emergency departments depend on computed tomography (CT) scans to provide rapid, accurate injury assessment. We conducted an analysis of all traumatic deaths autopsied at the Bexar County Medical Examiner's Office in which perimortem medical imaging (CT scan) was performed to assess the reliability of the CT scan in detecting trauma with sufficient accuracy for courtroom testimony. Cases were included in the study if an autopsy was conducted, a CT scan was performed within 24 hours before death, and there was no surgical intervention. Analysis was performed to assess the correlation between the autopsy and CT scan results. Sensitivity, specificity, positive predictive value, and negative predictive value were defined for the CT scan based on the autopsy results. The sensitivity of the CT scan ranged from 0% for cerebral lacerations, cervical vertebral body fractures, cardiac injury, and hollow viscus injury to 75% for liver injury. This study reveals that CT scans are an inadequate detection tool for forensic pathologists, where a definitive diagnosis is required, because they have a low level of accuracy in detecting traumatic injuries. CT scans may be adequate for clinicians in the emergency room setting, but are inadequate for courtroom testimony. If the evidence of trauma is based solely on CT scan reports, there is a high possibility of erroneous accusations, indictments, and convictions.

  5. Genomic sequencing of Pleistocene cave bears

    Energy Technology Data Exchange (ETDEWEB)

    Noonan, James P.; Hofreiter, Michael; Smith, Doug; Priest, JamesR.; Rohland, Nadin; Rabeder, Gernot; Krause, Johannes; Detter, J. Chris; Paabo, Svante; Rubin, Edward M.

    2005-04-01

    Despite the information content of genomic DNA, ancient DNA studies to date have largely been limited to amplification of mitochondrial DNA due to technical hurdles such as contamination and degradation of ancient DNAs. In this study, we describe two metagenomic libraries constructed using unamplified DNA extracted from the bones of two 40,000-year-old extinct cave bears. Analysis of {approx}1 Mb of sequence from each library showed that, despite significant microbial contamination, 5.8 percent and 1.1 percent of clones in the libraries contain cave bear inserts, yielding 26,861 bp of cave bear genome sequence. Alignment of this sequence to the dog genome, the closest sequenced genome to cave bear in terms of evolutionary distance, revealed roughly the expected ratio of cave bear exons, repeats and conserved noncoding sequences. Only 0.04 percent of all clones sequenced were derived from contamination with modern human DNA. Comparison of cave bear with orthologous sequences from several modern bear species revealed the evolutionary relationship of these lineages. Using the metagenomic approach described here, we have recovered substantial quantities of mammalian genomic sequence more than twice as old as any previously reported, establishing the feasibility of ancient DNA genomic sequencing programs.

  6. 14 CFR 27.623 - Bearing factors.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Bearing factors. 27.623 Section 27.623... STANDARDS: NORMAL CATEGORY ROTORCRAFT Design and Construction General § 27.623 Bearing factors. (a) Except... subject to pounding or vibration, must have a bearing factor large enough to provide for the effects of...

  7. 14 CFR 25.623 - Bearing factors.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Bearing factors. 25.623 Section 25.623... STANDARDS: TRANSPORT CATEGORY AIRPLANES Design and Construction General § 25.623 Bearing factors. (a) Except... subject to pounding or vibration, must have a bearing factor large enough to provide for the effects of...

  8. Grease lubrication in rolling bearings

    CERN Document Server

    Lugt, Piet M

    2012-01-01

    The definitive book on the science of grease lubrication for roller and needle bearings in industrial and vehicle engineering. Grease Lubrication in Rolling Bearings provides an overview of the existing knowledge on the various aspects of grease lubrication (including lubrication systems) and the state of the art models that exist today. The book reviews the physical and chemical aspects of grease lubrication, primarily directed towards lubrication of rolling bearings. The first part of the book covers grease composition, properties and rheology, including thermal

  9. Magnetic translator bearings

    Science.gov (United States)

    Hockney, Richard L. (Inventor); Downer, James R. (Inventor); Eisenhaure, David B. (Inventor); Hawkey, Timothy J. (Inventor); Johnson, Bruce G. (Inventor)

    1990-01-01

    A magnetic bearing system for enabling translational motion includes a carriage and a shaft for movably supporting the carriage; a first magnetic bearing fixed to one of the carriage and shaft and slidably received in a first channel of the other of the carriage and shaft. The first channel is generally U shaped with two side walls and a back wall. The magnetic bearing includes a pair of spaced magnetic pole pieces, each pole piece having a pair of electromagnetic coils mounted on poles on opposite ends of the pole piece proximate the side walls, and a third electromagnetic coil mounted on a pole of the pole piece proximate the backwall; a motion sensor for sensing translational motion along two axes and rotationally about three axes of the carriage and shaft relative to each other; and a correction circuit responsive to the sensor for generating a correction signal to drive the coils to compensate for any misalignment sensed between the carriage and the shaft.

  10. Actuators for Active Magnetic Bearings

    Directory of Open Access Journals (Sweden)

    Eric H. Maslen

    2017-10-01

    Full Text Available The literature of active magnetic bearing (AMB technology dates back to at least 1937 when the earliest work that clearly describes an active magnetic bearing system was published by Jesse Beams [...

  11. Performance of gas-lubricated cruciform-mounted tilting-pad journal bearings and a damped flexibly mounted spiral-groove thrust bearing

    Science.gov (United States)

    Ream, L. W.

    1974-01-01

    A test program was conducted to determine the performance characteristics of gas-lubricated cruciform-mounted tilting-pad journal bearings and a damped spiral-groove thrust bearing designed for the Brayton cycle rotating unit (BRU). Hydrostatic, hybrid (simultaneously hydrostatic and hydrodynamic), and hydrodynamic tests were conducted in argon gas at ambient pressure and temperature ranges representative of operation to the 10.5 kWe BRU power-generating level. Performance of the gas lubricated bearings is presented including hydrostatic gas flow rates, bearing clearances, bearing temperatures, and transient performance.

  12. 14 CFR 23.623 - Bearing factors.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Bearing factors. 23.623 Section 23.623... Bearing factors. (a) Each part that has clearance (free fit), and that is subject to pounding or vibration, must have a bearing factor large enough to provide for the effects of normal relative motion. (b) For...

  13. Hydrostatic bearing with a stepped duct

    International Nuclear Information System (INIS)

    Krevsun, Eh.P.; Ivanov, A.A.

    1975-01-01

    A method for calculating and experimental data from tests on a hydrostatic bearing whose operating hydraulic channel is formed by two cylincrical surfaces, are presented. Unlike currently used hydrostatic bearings, the bearing described has no capillary choke or diaphragm choke at the entrance. This simplifies the construction and increases the reliability, especially when it is operated with corrosive liquids or liquids containing solid suspensoids and causing erosion and blockage of the choke structures. In order to obtain the calculated relations, the flow of a liquid from the bearing in the axial direction to one side through a part of an aperture of unit width was examined. The effect of rotating the axle, of flow in the circumferential direction, and curvature of the aperture was not considered. Isothermal and laminar flows were considered. Because of the simplicity of the hydraulic circuit and the satisfactory properties (bearing capability and flow rate), the bearing described may be used in pumps operating with corrosive liquids, with those containing solid suspensoids and in nuclear energy establishments. (author)

  14. DW_BEAR

    Data.gov (United States)

    Department of Homeland Security — Subset of BEAR (Bi-Weekly Examination Analysis and Reporting) data used for financial audit remediation reporting within the Coast Guard Business Intelligence (CGBI)...

  15. Bearing-Mounting Concept Accommodates Thermal Expansion

    Science.gov (United States)

    Nespodzany, Robert; Davis, Toren S.

    1995-01-01

    Pins or splines allow radial expansion without slippage. Design concept for mounting rotary bearing accommodates differential thermal expansion between bearing and any structure(s) to which bearing connected. Prevents buildup of thermal stresses by allowing thermal expansion to occur freely but accommodating expansion in such way not to introduce looseness. Pin-in-slot configuration also maintains concentricity.

  16. Testimony presented to the House Science and Technology Committee, 18 June 1981, Washington, DC

    International Nuclear Information System (INIS)

    Richmond, C.R.

    1981-10-01

    This report is the text of invited testimony given by the author before the House Science and Technology Committee. This Congressional hearing on Societal Risks of Energy Systems reflects the growing interest on the part of Congress, the public, the scientific community, and other groups on this extremely important topic of Risk Analysis. This presentation will contain information on the emergence of an interdisciplinary professional field of risk analysis, including the recently formed Society for Risk Analysis. I will also discuss in some detail various risk analysis programs now in progress at the Oak Ridge National Laboratory and other research institutions. Also included will be some general philosophy concerning risks from energy-producing systems and my perspective on the needs for further developments in the field of risk analysis

  17. Blade Bearing Friction Estimation of Operating Wind Turbines

    DEFF Research Database (Denmark)

    Perisic, Nevena; Pedersen, Bo Juul; Kirkegaard, Poul Henning

    2012-01-01

    Blade root bearing on a wind turbine (WTG) enables pitching of blades for power control and rotor braking and is a WTG critical component. As the size of modern WTGs is constantly increasing, this leads to relatively less rigid bearings, more sensitive to deformations, thus WTG operational...... reliability can be increased by continuous monitoring of blade bearing. High blade bearing friction is undesirable, as it may be associated with excessive heating of the surfaces, damage and/or inefficient operation. Thus, continuous observation of bearing friction level is crucial for blade bearing health...... monitoring systems. A novel algorithm for online monitoring of bearing friction level is developed combining physical knowledge about pitch system dynamics with state estimator, i.e. observer theory and signal processing assuming realistic sensor availability. Results show estimation of bearing friction...

  18. HOME-SCHOOL INTERACTION: REMODELLING A FRAMEWORK OF PARENTS-TEACHERS RELATIONSHIP FOR SUPPORTING STUDENTS’ LEARNING

    Directory of Open Access Journals (Sweden)

    Adi Suryani

    2013-06-01

    Full Text Available Family and school are not separated social institution. Many parents view that it is schools and teachers which and who should be responsible for their children education. These views should be challenged by arising concern and awareness of parents and teachers of the importance of shared responsibility and cooperativeness. Parents are responsible for laying the basic/foundation of children’s learning, basic values, moral education, and basic social learning. Teachers and schools bear responsibility for developing those basic education. During their learning at school, students have a chance to develop their social competence. School also can be environment where children are gradually learning to be adult learners. They can be adult learners through engaging in collaborative learning activities. Through this social learning, children can learn develop social concern and sensitivity. Moreover, they can develop their learning through experience.

  19. The Role of Law in Prompting Parents to Participate Accountably with Education Partners

    Directory of Open Access Journals (Sweden)

    Elda De Waal

    2015-12-01

    Full Text Available Bearing in mind the previous Gauteng Education MEC’s recent indication that “discipline starts at home”, our article focuses on what South African law has contributed during the past 20 years to prompt parents participate accountably with partners in public school education, and how case law has defined parent accountability in this regard. Examples of relevant legislation would be those which assign the ultimate responsibility for learner conduct to parents, and call for a harmonious relationship between parents and educators. In line with the South African Schools Act’s requiring that parents partner with the State, educators and learners in accepting responsibility for their children’s schooling, this article highlights the need for a shared vision of the way forward. The importance of having such a shared vision to bring these disparate stakeholders’ aspirations together around the common goal, namely to develop all learners’ talents and capabilities, is underscored. The authors argue that factors such as reciprocal blame and a lack of cooperation are among the problems that hamper the full realisation in practice of the legislative provisions pertaining to parental accountability. Our article identifies solutions to this challenge, such as parents’ setting upright examples by behaving in an accountable manner, and recommendations, such as empowering parents for their roles as partners in education

  20. The shared preference niche of sympatric Asiatic black bears and sun bears in a tropical forest mosaic.

    Science.gov (United States)

    Steinmetz, Robert; Garshelis, David L; Chutipong, Wanlop; Seuaturien, Naret

    2011-01-20

    Ecologically similar species often coexist by partitioning use of habitats or resources. Such partitioning can occur through divergent or shared niches. We investigated overlap in habitat use and spatial co-occurrence by sympatric Asiatic black bears and sun bears in three habitats in Thailand, and thereby assessed which niche model best accounts for their coexistence. We used density of species-specific signs to assess habitat use. Signs of both bear species occurred in all three habitats, and on >60% of sampling transects. Both species fed mostly on fruit; insect feeding signs were uncommon, and were mostly from sun bears. Significant differences in habitat use occurred only in montane forest, the habitat in which fruit was most abundant; incidence of black bear sign there was six times higher than that of sun bears. Habitat use was similar between the two species in the other habitats, which comprised 85% of the area. Of 10 habitat attributes examined, fruiting tree density was the best predictor of occurrence for both species. Models that included interspecific competition (fresh foraging activity of the other species) were less supported than the top models without competition. Bear species co-occurrence at both coarse and fine spatial scales and use of the same resources (fruit trees) indicated common niche preferences. However, their habitat use differed in ways expected from their physical differences: larger black bears dominated in the most fruit-rich habitat, and smaller sun bears used less-preferred insects. These results indicate broadly overlapping fundamental niches combined with asymmetric competition-features consistent with the concept of shared preference niches. This model of the niche has received little attention in ecology, but appears to be relatively common in nature.

  1. The shared preference niche of sympatric Asiatic black bears and sun bears in a tropical forest mosaic.

    Directory of Open Access Journals (Sweden)

    Robert Steinmetz

    2011-01-01

    Full Text Available Ecologically similar species often coexist by partitioning use of habitats or resources. Such partitioning can occur through divergent or shared niches. We investigated overlap in habitat use and spatial co-occurrence by sympatric Asiatic black bears and sun bears in three habitats in Thailand, and thereby assessed which niche model best accounts for their coexistence.We used density of species-specific signs to assess habitat use. Signs of both bear species occurred in all three habitats, and on >60% of sampling transects. Both species fed mostly on fruit; insect feeding signs were uncommon, and were mostly from sun bears. Significant differences in habitat use occurred only in montane forest, the habitat in which fruit was most abundant; incidence of black bear sign there was six times higher than that of sun bears. Habitat use was similar between the two species in the other habitats, which comprised 85% of the area. Of 10 habitat attributes examined, fruiting tree density was the best predictor of occurrence for both species. Models that included interspecific competition (fresh foraging activity of the other species were less supported than the top models without competition.Bear species co-occurrence at both coarse and fine spatial scales and use of the same resources (fruit trees indicated common niche preferences. However, their habitat use differed in ways expected from their physical differences: larger black bears dominated in the most fruit-rich habitat, and smaller sun bears used less-preferred insects. These results indicate broadly overlapping fundamental niches combined with asymmetric competition-features consistent with the concept of shared preference niches. This model of the niche has received little attention in ecology, but appears to be relatively common in nature.

  2. 77 FR 59639 - Bear Lake National Wildlife Refuge, Bear Lake County, ID and Oxford Slough Waterfowl Production...

    Science.gov (United States)

    2012-09-28

    ... by 2020 to reduce the sedimentation rate of Bear River water diversions and to better exclude carp... sedimentation rate of Bear River water diversions and better exclude carp from Refuge wetlands. As in... DEPARTMENT OF THE INTERIOR Fish and Wildlife Service [FWS-R1-R-2012-N095; 1265-0000-10137-S3] Bear...

  3. 26 CFR 301.9000-6 - Examples.

    Science.gov (United States)

    2010-04-01

    ... examining certain post-divorce Federal income tax returns of the non-custodial parent. This is a non-IRS... the reason for the lack of taxpayer consent to disclosure that the non-custodial parent has refused to... is requested to testify in a divorce proceeding. The request seeks testimony explaining the meaning...

  4. Rotor Rolling over a Water-Lubricated Bearing

    Science.gov (United States)

    Shatokhin, V. F.

    2018-02-01

    The article presents the results of studying the effect of forces associated with secondary damping coefficients (gyroscopic forces) on the development of asynchronous rolling of the rotor over a water-lubricated bearing. The damping forces act against the background of other exciting forces in the rotor-supports system, in particular, the exciting forces of contact interaction between the rotor and bearing. The article considers a rotor resting on supports rubbing against the bearing and the occurrence of self-excited vibration in the form of asynchronous roll-over. The rotor supports are made in the form of plain-type water-lubricated bearings. The plain-type bearing's lubrication stiffness and damping forces are determined using the wellknown algorithms taking into account the physical properties of water serving as lubrication of the bearing. The bearing sliding pair is composed of refractory materials. The lubrication layer in such bearings is thinner than that used in oil-lubricated bearings with white metal lining, and there is no white metal layer in waterlubricated bearings. In case of possible deviations from normal operation of the installation, the rotating rotor comes into direct contact with the liner's rigid body. Unsteady vibrations are modeled using a specially developed software package for calculating the vibration of rotors that rub against the turbine (pump) stator elements. The stiffness of the bearing liner with the stator support structure is specified by a dependence in the force-deformation coordinate axes. In modeling the effect of damping forces, the time moment corresponding to the onset of asynchronous rolling-over with growing vibration amplitudes is used as the assessment criterion. With a longer period of time taken for the rolling-over to develop, it becomes possible to take the necessary measures in response to actuation of the equipment set safety system, which require certain time for implementing them. It is shown that the

  5. Rolling Bearing Life Prediction, Theory, and Application

    Science.gov (United States)

    Zaretsky, Erwin V.

    2016-01-01

    A tutorial is presented outlining the evolution, theory, and application of rolling-element bearing life prediction from that of A. Palmgren, 1924; W. Weibull, 1939; G. Lundberg and A. Palmgren, 1947 and 1952; E. Ioannides and T. Harris, 1985; and E. Zaretsky, 1987. Comparisons are made between these life models. The Ioannides-Harris model without a fatigue limit is identical to the Lundberg-Palmgren model. The Weibull model is similar to that of Zaretsky if the exponents are chosen to be identical. Both the load-life and Hertz stress-life relations of Weibull, Lundberg and Palmgren, and Ioannides and Harris reflect a strong dependence on the Weibull slope. The Zaretsky model decouples the dependence of the critical shear stress-life relation from the Weibull slope. This results in a nominal variation of the Hertz stress-life exponent. For 9th- and 8th-power Hertz stress-life exponents for ball and roller bearings, respectively, the Lundberg-Palmgren model best predicts life. However, for 12th- and 10th-power relations reflected by modern bearing steels, the Zaretsky model based on the Weibull equation is superior. Under the range of stresses examined, the use of a fatigue limit would suggest that (for most operating conditions under which a rolling-element bearing will operate) the bearing will not fail from classical rolling-element fatigue. Realistically, this is not the case. The use of a fatigue limit will significantly overpredict life over a range of normal operating Hertz stresses. (The use of ISO 281:2007 with a fatigue limit in these calculations would result in a bearing life approaching infinity.) Since the predicted lives of rolling-element bearings are high, the problem can become one of undersizing a bearing for a particular application. Rules had been developed to distinguish and compare predicted lives with those actually obtained. Based upon field and test results of 51 ball and roller bearing sets, 98 percent of these bearing sets had acceptable

  6. Fractal analysis of polar bear hairs

    Directory of Open Access Journals (Sweden)

    Wang Qing-Li

    2015-01-01

    Full Text Available Hairs of a polar bear (Ursus maritimus are of superior properties such as the excellent thermal protection. Why do polar bears can resist such cold environment? The paper concludes that its fractal porosity plays an important role, and its fractal dimensions are very close to the golden mean, 1.618, revealing the possible optimal structure of polar bear hair.

  7. Removable bearing arrangement for a wind turbine generator

    Science.gov (United States)

    Bagepalli, Bharat Sampathkumaran; Jansen, Patrick Lee; Gadre, Aniruddha Dattatraya

    2010-06-15

    A wind generator having removable change-out bearings includes a rotor and a stator, locking bolts configured to lock the rotor and stator, a removable bearing sub-assembly having at least one shrunk-on bearing installed, and removable mounting bolts configured to engage the bearing sub-assembly and to allow the removable bearing sub-assembly to be removed when the removable mounting bolts are removed.

  8. Technology development for indigenous water lubricated bearings

    International Nuclear Information System (INIS)

    Limaye, P.K.; Soni, N.L.; Agrawal, R.G.

    2010-01-01

    Water Lubricated Bearings (WLB) are used in various mechanisms of fuel handling systems of PHWRs and AHWR. Availability and random failures of these bearings was a major factor in refuelling operations. Indigenous development of these bearings was taken up and 7 types of antifriction bearings in various sizes (totaling 37 variants) for PHWR, AHWR and Dhruva applications were successfully developed. This paper deals with various aspects of WLB development. (author)

  9. Local Attitudes towards Bear Management after Illegal Feeding and Problem Bear Activity

    OpenAIRE

    David Fraser; Sara Dubois

    2013-01-01

    Simple Summary The “pot bears” received international media attention in 2010 after police discovered the intentional feeding of black bears during the investigation of an alleged marijuana-growing operation in Christina Lake, British Columbia. Residents of this small community were surveyed by phone twice over the following year, before and after government actions. This study aimed to understand local attitudes on how these bears should be managed and whether they differed from existing bea...

  10. Uranium-bearing wastes and their radon emanation

    International Nuclear Information System (INIS)

    Sasaki, Tomozo; Imamura, Mitsutaka; Gunji, Yasuyoshi

    2007-01-01

    There are no data available with regard to radon emanation coefficients for uranium-bearing wastes; such data are needed for the assessment of radiation exposure from radon that will be generated in the distant future as one uranium progeny at shallow land disposal sites for uranium-bearing wastes. There are many kinds of uranium-bearing wastes. However, it is not necessary to measure the radon emanation coefficients for all of them for two reasons. First, the radon emanation coefficients for uranium-bearing wastes contaminated by dissolved uranium are determined by the uranium chemical form, the manner of uranium deposition on the waste matrix, and the size of the particles which constitute the waste matrix. Therefore, only a few representative measurements are sufficient for such uranium-bearing wastes. Second, it is possible to make theoretical calculations of radon emanation coefficients for uranium-bearing wastes contaminated by UO 2 particles before sintering. In the present study, simulated uranium-bearing wastes contaminated by dissolved uranium were prepared, their radon emanation coefficients were measured and radon emanation coefficients were calculated theoretically for uranium-bearing wastes contaminated by UO 2 particles before sintering. The obtained radon emanation coefficients are distributed at higher values than those for ubiquitous soils and rocks in the natural environment. Therefore, it is not correct to just compare uranium concentrations among uranium-bearing wastes, ubiquitous soils and rocks in terms of radiation exposure. The radon emanation coefficients obtained in the present study have to be employed together with the uranium concentration in uranium-bearing wastes in order to achieve proper assessment of radiation exposure. (author)

  11. Failure of GIMBAL bearing in directional GYRO

    International Nuclear Information System (INIS)

    Pervaiz, R.; Baig, N.A.; Shahid, M.; Ahmad, A.; Chohan, G.Y.

    2003-01-01

    This paper relates to the directional gyro of a sensing device used in indigenously developed surface-to-surface missile. The assembling of more than one thousand components in the form of several sub assemblies including hundreds of silver solders of this device was done in the hundred-thousands-class clean room according to assembly procedure. Whereas more than twenty bearings including gimbals bearings were assembled in the ten-thousands-class clean room after inspection/ testing them on beating testing system as per routine. The device was entered in testing and adjustment phase after successful completion of assembly work. The directional gyro qualified all the tests except the most critical one, the drift-rate. The drift-rate of outer gimbal was 60% more than permissible limit whereas drift-rate of inner gimbal was found O.K. It was diagnosed that at least one inner gimbal bearing out of two had some problem. The results were same after rebalancing of gimbals three times. The directional gyro was disassembled in clean room and the radial-thrust-bearing was recovered and flange bearing which are inner gimbal bearings. They were checked on bearing testing system and it was found that flange-bearing had more friction than permissible limit and hence rejected but radial thrust bearing were declared O.K. The gyro was reassembled with new O.K. flange bearing and the assembly work was completed in all respects. The sensing device qualified all the tests including the drift-rate. This case study is being presented to emphasize the importance of careful assembly of gyro in clean environment. (author)

  12. Bearing life in contaminated oil and oil passing into bearing for tapered roller bearing; Ensui koro jikuuke ni okeru ibutsu yuchu deno jumyo to kantsu yuryo

    Energy Technology Data Exchange (ETDEWEB)

    Asai, Y; Oshima, H; Sakamoto, K [Koyo Seiko Co. Ltd., Osaka (Japan)

    1997-10-01

    In this paper a relationship between depth of dents, area of dents gathered and bearing life has been investigated for tapered roller bearings used in differential gear case. It is effective for the longer bearing life to reduce hard particles of Fe especially among several contaminations existing in the gear case. It is also effective to make oil level lower in the case from the view point for reduction of number of dents. 8 refs., 8 figs., 4 tabs.

  13. Grizzly bears and mining in the Cheviot region

    Energy Technology Data Exchange (ETDEWEB)

    Symbaluk, M.; Archibald, T. [Foothills Research Inst., Hinton, AB (Canada)

    2008-07-01

    This presentation described a grizzly bear research program conducted by the Foothill Research Institute at the Cheviot mine. The research program uses a satellite land classification protocol and remote sensing tools to map and identify the grizzly bear habitat. Modelling is also conducted to predict bear probabilities. Global information systems (GIS) are used to evaluate bear responses to human activities. Grizzly bear health and wellness is also assessed as part of the programs. Land maps are combined with global positioning systems (GPS) and resource selection function (RSF) models in order to map grizzly bear distribution. Data obtained from the program is used to inform decision-making and support policy development. Previous studies predicted that the grizzly bear population would disappear from the Cheviot mine area after 20 years of its being in operation. The research program provided real data to test predictions made during previous environmental assessments. Grizzly bear populations have actually increased in the mining area. It was concluded that the bears have moved more freely through industrial landscapes than previously predicted. tabs., figs.

  14. Ball Bearing Analysis with the ORBIS Tool

    Science.gov (United States)

    Halpin, Jacob D.

    2016-01-01

    Ball bearing design is critical to the success of aerospace mechanisms. Key bearing performance parameters, such as load capability, stiffness, torque, and life all depend on accurate determination of the internal load distribution. Hence, a good analytical bearing tool that provides both comprehensive capabilities and reliable results becomes a significant asset to the engineer. This paper introduces the ORBIS bearing tool. A discussion of key modeling assumptions and a technical overview is provided. Numerous validation studies and case studies using the ORBIS tool are presented. All results suggest the ORBIS code closely correlates to predictions on bearing internal load distributions, stiffness, deflection and stresses.

  15. Superconducting bearings for flywheel applications

    DEFF Research Database (Denmark)

    Abrahamsen, A.B.

    2001-01-01

    A literature study on the application of superconducting bearings in energy storage flywheel systems. The physics of magnetic levitation and superconductors are presented in the first part of the report, followed by a discussion of the literature found onthe applications of superconducting bearings...

  16. Stochasticity in Natural Forage Production Affects Use of Urban Areas by Black Bears: Implications to Management of Human-Bear Conflicts

    Science.gov (United States)

    Baruch-Mordo, Sharon; Wilson, Kenneth R.; Lewis, David L.; Broderick, John; Mao, Julie S.; Breck, Stewart W.

    2014-01-01

    The rapid expansion of global urban development is increasing opportunities for wildlife to forage and become dependent on anthropogenic resources. Wildlife using urban areas are often perceived dichotomously as urban or not, with some individuals removed in the belief that dependency on anthropogenic resources is irreversible and can lead to increased human-wildlife conflict. For American black bears (Ursus americanus), little is known about the degree of bear urbanization and its ecological mechanisms to guide the management of human-bear conflicts. Using 6 years of GPS location and activity data from bears in Aspen, Colorado, USA, we evaluated the degree of bear urbanization and the factors that best explained its variations. We estimated space use, activity patterns, survival, and reproduction and modeled their relationship with ecological covariates related to bear characteristics and natural food availability. Space use and activity patterns were dependent on natural food availability (good or poor food years), where bears used higher human density areas and became more nocturnal in poor food years. Patterns were reversible, i.e., individuals using urban areas in poor food years used wildland areas in subsequent good food years. While reproductive output was similar across years, survival was lower in poor food years when bears used urban areas to a greater extent. Our findings suggest that bear use of urban areas is reversible and fluctuates with the availability of natural food resources, and that removal of urban individuals in times of food failures has the potential to negatively affect bear populations. Given that under current predictions urbanization is expected to increase by 11% across American black bear range, and that natural food failure years are expected to increase in frequency with global climate change, alternative methods of reducing urban human-bear conflict are required if the goal is to prevent urban areas from becoming population sinks

  17. Stochasticity in natural forage production affects use of urban areas by black bears: implications to management of human-bear conflicts.

    Directory of Open Access Journals (Sweden)

    Sharon Baruch-Mordo

    Full Text Available The rapid expansion of global urban development is increasing opportunities for wildlife to forage and become dependent on anthropogenic resources. Wildlife using urban areas are often perceived dichotomously as urban or not, with some individuals removed in the belief that dependency on anthropogenic resources is irreversible and can lead to increased human-wildlife conflict. For American black bears (Ursus americanus, little is known about the degree of bear urbanization and its ecological mechanisms to guide the management of human-bear conflicts. Using 6 years of GPS location and activity data from bears in Aspen, Colorado, USA, we evaluated the degree of bear urbanization and the factors that best explained its variations. We estimated space use, activity patterns, survival, and reproduction and modeled their relationship with ecological covariates related to bear characteristics and natural food availability. Space use and activity patterns were dependent on natural food availability (good or poor food years, where bears used higher human density areas and became more nocturnal in poor food years. Patterns were reversible, i.e., individuals using urban areas in poor food years used wildland areas in subsequent good food years. While reproductive output was similar across years, survival was lower in poor food years when bears used urban areas to a greater extent. Our findings suggest that bear use of urban areas is reversible and fluctuates with the availability of natural food resources, and that removal of urban individuals in times of food failures has the potential to negatively affect bear populations. Given that under current predictions urbanization is expected to increase by 11% across American black bear range, and that natural food failure years are expected to increase in frequency with global climate change, alternative methods of reducing urban human-bear conflict are required if the goal is to prevent urban areas from

  18. Stochasticity in natural forage production affects use of urban areas by black bears: implications to management of human-bear conflicts.

    Science.gov (United States)

    Baruch-Mordo, Sharon; Wilson, Kenneth R; Lewis, David L; Broderick, John; Mao, Julie S; Breck, Stewart W

    2014-01-01

    The rapid expansion of global urban development is increasing opportunities for wildlife to forage and become dependent on anthropogenic resources. Wildlife using urban areas are often perceived dichotomously as urban or not, with some individuals removed in the belief that dependency on anthropogenic resources is irreversible and can lead to increased human-wildlife conflict. For American black bears (Ursus americanus), little is known about the degree of bear urbanization and its ecological mechanisms to guide the management of human-bear conflicts. Using 6 years of GPS location and activity data from bears in Aspen, Colorado, USA, we evaluated the degree of bear urbanization and the factors that best explained its variations. We estimated space use, activity patterns, survival, and reproduction and modeled their relationship with ecological covariates related to bear characteristics and natural food availability. Space use and activity patterns were dependent on natural food availability (good or poor food years), where bears used higher human density areas and became more nocturnal in poor food years. Patterns were reversible, i.e., individuals using urban areas in poor food years used wildland areas in subsequent good food years. While reproductive output was similar across years, survival was lower in poor food years when bears used urban areas to a greater extent. Our findings suggest that bear use of urban areas is reversible and fluctuates with the availability of natural food resources, and that removal of urban individuals in times of food failures has the potential to negatively affect bear populations. Given that under current predictions urbanization is expected to increase by 11% across American black bear range, and that natural food failure years are expected to increase in frequency with global climate change, alternative methods of reducing urban human-bear conflict are required if the goal is to prevent urban areas from becoming population sinks.

  19. Characterization and measurement of hybrid gas journal bearings

    Science.gov (United States)

    Lawrence, Tom Marquis

    This thesis concentrates on the study of hybrid gas journal bearings (bearings with externally pressurized mass addition). It differs from most work in that it goes back to "basics" to explore the hydrodynamic phenomena in the bearing gap. The thesis compares geometrically identical bearings with 2 configurations of external pressurization, porous liners where mass-addition compensation is varied by varying the liner's permeability, and bushings with 2 rows of 6 feedholes where the mass-addition compensation is varied by the feedhole diameter. Experimentally, prototype bearings with mass-addition compensation that spans 2 orders of magnitude with differing clearances are built and their aerostatic properties and mass addition characteristics are thoroughly tested. The fundamental equations for compressible, laminar, Poiseuille flow are used to suggest how the mass flow "compensation" should be mathematically modeled. This is back-checked against the experimental mass flow measurements and is used to determine a mass-addition compensation parameter (called Kmeas) for each prototype bushing. In so doing, the methodology of modeling and measuring the mass addition in a hybrid gas bearing is re-examined and an innovative, practical, and simple method is found that makes it possible to make an "apples-to-apples" comparison between different configurations of external pressurization. This mass addition model is used in conjunction with the Reynolds equation to perform theory-based numerical analysis of virtual hybrid gas journal bearings (CFD experiments). The first CFD experiments performed use virtual bearings modeled to be identical to the experimental prototypes and replicate the experimental work. The results are compared and the CFD model is validated. The ontological significance of appropriate dimensionless similitude parameters is re-examined and a, previously lacking, complete set of similitude factors is found for hybrid bearings. A new practical method is

  20. Credibility assessment of testimonies provided by victims with intellectual disabilities

    Directory of Open Access Journals (Sweden)

    Antonio L. MANZANERO

    2017-09-01

    Full Text Available One of the main obstacles in the way of access to justice for the victims with intellectual disability comes from the stereotypes referred to their ability to produce a statement at police legal procedures, with the consequence that some consider their statements less reliable than the rest of the victims, and others considerate their statements more reliable given their inability to create complex lies. This article reviews three of the most recent studies done by the UCM group of Psychology of Testimony, with the objective of analyzing the role of experience and intuition in the evaluation of credibility in people with intellectual disability (ID, and also it aims to prove whether the credibility analysis procedures such as Reality Monitoring (RM and Statement Validity Assessment (SVA would be valid procedures to discriminate between real and false statements within these collectives. From the results of these studies, it can be deducted that experience may not seem to be enough in order to discriminate between real and simulated victims, but analyzing the characteristics of the statements as the only indicator doesn’t seem to be enough either. As an alternative, the general procedure HELPT is proposed for the evaluation of credibility of people with ID.

  1. Assessing bear-human conflicts in the Yukon Territory

    OpenAIRE

    Lukie, Raechel Dawn

    2010-01-01

    Managing conflicts between bears and humans is vital for human safety and for the conservation of bears. This study investigated black bear (Ursus americanus) and grizzly bear (Ursus arctos) interactions with humans in 18 major communities of the Yukon Territory. I used an information theoretic approach to generate predictive models of the relative potential of bear-human interaction for the 9 conservation officer management regions in the Yukon Territory. I independently modeled interactions...

  2. 77 FR 77070 - Black Bear Hydro Partners, LLC;

    Science.gov (United States)

    2012-12-31

    ... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Project No. 2727-086] Black Bear Hydro...: October 24, 2012. d. Submitted By: Black Bear Hydro Partners, LLC (Black Bear Hydro). e. Name of Project... designating Black Bear Hydro as the Commission's non-federal representative for carrying out informal...

  3. Effects of exotic species on Yellowstone's grizzly bears

    Science.gov (United States)

    Reinhart, Daniel P.; Haroldson, Mark A.; Mattson, D.J.; Gunther, Kerry A.

    2001-01-01

    Humans have affected grizzly bears (Ursus arctos horribilis) by direct mortality, competition for space and resources, and introduction of exotic species. Exotic organisms that have affected grizzly bears in the Greater Yellowstone Area include common dandelion (Taraxacum officinale), nonnative clovers (Trifolium spp.), domesticated livestock, bovine brucellosis (Brucella abortus), lake trout (Salvelinus namaycush), and white pine blister rust (Cronartium ribicola). Some bears consume substantial amounts of dandelion and clover. However, these exotic foods provide little digested energy compared to higher-quality bear foods. Domestic livestock are of greater energetic value, but use of this food by bears often leads to conflicts with humans and subsequent increases in bear mortality. Lake trout, blister rust, and brucellosis diminish grizzly bears foods. Lake trout prey on native cutthroat trout (Oncorhynchus clarkii) in Yellowstone Lake; white pine blister rust has the potential to destroy native whitebark pine (Pinus albicaulis) stands; and management response to bovine brucellosis, a disease found in the Yellowstone bison (Bison bison) and elk (Cervus elaphus), could reduce populations of these 2 species. Exotic species will likely cause more harm than good for Yellowstone grizzly bears. Managers have few options to mitigate or contain the impacts of exotics on Yellowstone's grizzly bears. Moreover, their potential negative impacts have only begun to unfold. Exotic species may lead to the loss of substantial highquality grizzly bear foods, including much of the bison, trout, and pine seeds that Yellowstone grizzly bears currently depend upon.

  4. Research In Diagnosing Bearing Defects From Vibrations

    Science.gov (United States)

    Zoladz, T.; Earhart, E.; Fiorucci, T.

    1995-01-01

    Report describes research in bearing-defect signature analysis - use of vibration-signal analysis to diagnose defects in roller and ball bearings. Experiments performed on bearings in good condition and other bearings in which various parts scratched to provide known defects correlated with vibration signals. Experiments performed on highly instrumented motor-driven rotor assembly at speeds up to 10,050 r/min, using accelerometers, velocity probes, and proximity sensors mounted at various locations on assembly to measure vibrations.

  5. The Biotribology of PEEK-on-HXLPE Bearings Is Comparable to Traditional Bearings on a Multidirectional Pin-on-disk Tester.

    Science.gov (United States)

    Baykal, Doruk; Siskey, Ryan S; Underwood, Richard J; Briscoe, Adam; Kurtz, Steven M

    2016-11-01

    All-polymer bearings involving polyetheretherketone (PEEK) have been proposed for orthopaedic applications because they may reduce stress shielding, reduce weight of the implants, reduce wear and risk of osteolysis, and prevent release of metal ions by replacing the metal articulating components. Little is known about the biotribology of all-polymer PEEK bearings, including the effects of cross-shear, which are relevant for implant longevity, especially in the hip, and increased temperature that may affect lubricant proteins and, hence, lubrication in the joint. Using pin-on-disk in vitro testing, we asked: (1) Can all-polymer bearing couples involving PEEK have a comparable or lower wear rate than highly crosslinked UHMWPE (HXLPE) on CoCr bearing couples? (2) Is the wear rate of PEEK bearing couples affected by the amount of cross-shear? (3) Is there a difference in wear mechanism and surface morphology for all-polymer bearing surfaces compared with UHMWPE (HXLPE) on CoCr? We simultaneously tested a total of 100 pin-on-disk couples (n = 10 per bearing couple) consisting of three traditional metal-on-UHMWPE and seven polymer-on-polymer bearings for 2 million cycles under physiologically relevant conditions and in accordance with ASTM F732. Using analysis of variance, we analyzed the effect of bearing surface topography and cross-shear on wear rate. The changes in surface topography were evaluated using optical microscopy. Sample size was sufficient to provide 80% power to detect a difference of 1.4 mm 3 /MC in average wear rates of bearing couples. The combined wear rates of all-polymer bearing couples were not different than traditional bearing couples. With the numbers available, the PEEK and HXLPE bearing couple had a mean wear rate (WR: mean ± SD) of 0.9 ± 1.1 mm 3 /MC (95% confidence interval [CI], 0.2-1.5 mm 3 /MC), which was not different than the wear rate of the CoCr and HXLPE bearing couple (1.6 ± 2.0 mm 3 /MC; 95% CI, 0.4-2.8 mm 3 /MC; mean difference

  6. Bearing assemblies, apparatuses, and motor assemblies using the same

    Science.gov (United States)

    Sexton, Timothy N.; Cooley, Craig H.; Knuteson, Cody W.

    2015-12-29

    Various embodiments of the invention relate to bearing assemblies, apparatuses and motor assemblies that include geometric features configured to impart a selected amount of heat transfer and/or hydrodynamic film formation. In an embodiment, a bearing assembly may include a plurality of superhard bearing pads distributed circumferentially about an axis. At least some of the plurality of superhard bearing pads may include a plurality of sub-superhard bearing elements defining a bearing surface. At least some of the plurality of sub-superhard bearing elements may be spaced from one another by one or more voids to impart a selected amount of heat transfer and hydrodynamic film formation thereon during operation. The bearing assembly may also include a support ring that carries the plurality of superhard bearing pads. In addition, at least a portion of the sub-superhard bearing elements may extend beyond the support ring.

  7. Die poësie van Elisabeth Eybers: 'n Digterskap van sewentig jaar ...

    African Journals Online (AJOL)

    ... the initial alienation from her native country and her eventual homecoming in another country, her poetic range expanded enormously. All along her connection to South Africa was not broken. She continues writing in Afrikaans, and her poetry bears testimony to the ongoing creative processes in search of selfrealization.

  8. Vertically loaded pivot bearing for high-speed shafts

    International Nuclear Information System (INIS)

    Zippe, G.; Werner, D.; Keller, A.; Stephan, E.

    1974-01-01

    The pivot bearing subjected to vertical loads has a pivot with a rounded end and a diametral slot and a cup-shaped recess in the bearing box. The end of the pivot and the recess constitute a gap which widens towards the periphery of the bearing. The bearing box carries an attachment with a clearance, the shape of a hollow cylinder and accomodating the pivot and its shaft. To feed the lubricating oil surrounding and filling the bearing there is a groove either in the wall of the clearance or at the end of the pivot in the direction of rotation of the shaft or against it. The oil carried to the support point flows back into the oil bath surrounding the bearing through a slot in the bearing box. (DG) [de

  9. Non-Weight-Bearing and Weight-Bearing Ultrasonography of Select Foot Muscles in Young, Asymptomatic Participants: A Descriptive and Reliability Study.

    Science.gov (United States)

    Battaglia, Patrick J; Mattox, Ross; Winchester, Brett; Kettner, Norman W

    The primary aim of this study was to determine the reliability of diagnostic ultrasound imaging for select intrinsic foot muscles using both non-weight-bearing and weight-bearing postures. Our secondary aim was to describe the change in muscle cross-sectional area (CSA) and dorsoplantar thickness when bearing weight. An ultrasound examination was performed with a linear ultrasound transducer operating between 9 and 12 MHz. Long-axis and short-axis ultrasound images of the abductor hallucis, flexor digitorum brevis, and quadratus plantae were obtained in both the non-weight-bearing and weight-bearing postures. Two examiners independently collected ultrasound images to allow for interexaminer and intraexaminer reliability calculation. The change in muscle CSA and dorsoplantar thickness when bearing weight was also studied. There were 26 participants (17 female) with a mean age of 25.5 ± 3.8 years and a mean body mass index of 28.0 ± 7.8 kg/m 2 . Inter-examiner reliability was excellent when measuring the muscles in short axis (intraclass correlation coefficient >0.75) and fair to good in long axis (intraclass correlation coefficient >0.4). Intraexaminer reliability was excellent for the abductor hallucis and flexor digitorum brevis and ranged from fair to good to excellent for the quadratus plantae. Bearing weight did not reduce interexaminer or intraexaminer reliability. All muscles exhibited a significant increase in CSA when bearing weight. This is the first report to describe weight-bearing diagnostic ultrasound of the intrinsic foot muscles. Ultrasound imaging is reliable when imaging these muscles bearing weight. Furthermore, muscle CSA increases in the weight-bearing posture. Copyright © 2016. Published by Elsevier Inc.

  10. Eastern slopes grizzly bear project : project update

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-01-01

    This report updates a study to examine the cumulative effects of human activities on the grizzly bears in the central Canadian Rockies. The project was initiated in 1994 to acquire accurate scientific information on the habitat and populations of grizzly bears in the area of the Banff National Park and Kananaskis Country. This area is probably the most heavily used and developed area where the grizzly still survives. The information gathered throughout the course of the study is used to better protect and manage the bears and other sensitive carnivores in the region. Using telemetry, researchers monitored 25 grizzly bears which were radio-collared in a 22,000 square-kilometer area in the upper Bow Valley drainage of the eastern Alberta slopes. The researchers worked with representatives from Husky Oil and Rigel Energy on the development of the Moose Mountain oil and gas field without adversely affecting the grizzly bear population. Information collected over eight years indicates that the grizzly bears have few and infrequent offspring. Using the information gathered thus far, the location of the Moose Mountain to Jumping Pound pipeline was carefully selected, since the bears suffer from high mortality, and the food and cover had already been compromised by the high number of roads, trails and other human activities in the area. The research concluded in November 2001 provides sufficient information to accurately asses the status of the grizzly bear population and habitat. The data will be analyzed and integrated in 2002 into models that reflect the variables affecting grizzly bears and a final report will be published.

  11. Nonlinear Dynamic Response of Compliant Journal Bearings

    Directory of Open Access Journals (Sweden)

    Glavatskih S.

    2012-07-01

    Full Text Available This paper investigates the dynamic response of the compliant tilting pad journal bearings subjected to synchronous excitation. Bearing compliance is affected by the properties of pad liner and pad support geometry. Different unbalance eccentricities are considered. It is shown that bearing dynamic response is non-linear. Journal orbit complexity increases with pad compliance though the orbit amplitudes are marginally affected at low loads. At high loads, the journal is forced to operate outside the bearing clearance. The polymer liner reduces the maximum oil film pressure by a factor of 2 when compared to the white metal liner. The nonlinear dynamic response of compliant tilting pad journal bearings is thoroughly discussed.

  12. Grizzly bear density in Glacier National Park, Montana

    Science.gov (United States)

    Kendall, K.C.; Stetz, J.B.; Roon, David A.; Waits, L.P.; Boulanger, J.B.; Paetkau, David

    2008-01-01

    We present the first rigorous estimate of grizzly bear (Ursus arctos) population density and distribution in and around Glacier National Park (GNP), Montana, USA. We used genetic analysis to identify individual bears from hair samples collected via 2 concurrent sampling methods: 1) systematically distributed, baited, barbed-wire hair traps and 2) unbaited bear rub trees found along trails. We used Huggins closed mixture models in Program MARK to estimate total population size and developed a method to account for heterogeneity caused by unequal access to rub trees. We corrected our estimate for lack of geographic closure using a new method that utilizes information from radiocollared bears and the distribution of bears captured with DNA sampling. Adjusted for closure, the average number of grizzly bears in our study area was 240.7 (95% CI = 202–303) in 1998 and 240.6 (95% CI = 205–304) in 2000. Average grizzly bear density was 30 bears/1,000 km2, with 2.4 times more bears detected per hair trap inside than outside GNP. We provide baseline information important for managing one of the few remaining populations of grizzlies in the contiguous United States.

  13. Research on Bored Bearing Characteristics in Xi’an

    Directory of Open Access Journals (Sweden)

    Zhang Lipeng

    2015-01-01

    Full Text Available To analyze the influence of different soil properties on pile foundation load-bearing characteristics, taking a section of railway in Xi’an and a bridge of Xi’an as test area, and by field static load test to study load transfer characteristics after the test piles under axial pressure, including the distribution of axial force, pile lateral friction, tip resistance traits, ultimate bearing capacity determine, and compare with the theory bearing capacity. Experimental results show that, adjacent soil properties change large, axial force and lateral friction mutation at the junction of corresponding soil layer. Silty clay in different parts is below ground, and its lateral friction plays much difference. Pile lateral friction plays an important role in bearing capacity, but the role of round gravel soil end bearing capacity to pile bearing capacity can’t be ignored. Tests calculate pile bearing capacity significantly larger than standardized formula calculation bearing capacity, which are respectively 55.35% and 119.1%. And give the similar project condition the suggested values of pile bearing capacity and soil friction, to provide reference for similar pile foundation design.

  14. On the future of controllable fluid film bearings

    DEFF Research Database (Denmark)

    Santos, Ilmar

    2011-01-01

    lubrication regimes, i.e., as tilting-pad journal bearings, multi-recess journal bearings and plain journal bearings. After a comprehensive overview of the theoretical and experimental technological advancements achieved in university laboratories, the feasibility of industrial applications is highlighted......This work gives an overview of the theoretical and experimental achievements of mechatronics applied to fluid film bearings. Compressible and uncompressible fluids are addressed. Rigid and elastic (deformable) bearing profiles are investigated. Hydraulic, pneumatic, magnetic and piezoelectric...

  15. Superconducting bearings for flywheel applications

    Energy Technology Data Exchange (ETDEWEB)

    Abrahamsen, Asger Bech

    2001-05-01

    A literature study on the application of superconducting bearings in energy storage flywheel systems. The physics of magnetic levitation and superconductors are presented in the first part of the report, followed by a discussion of the literature found on the applications of superconducting bearings in flywheels. (au)

  16. Wear numbers for ball cup and journal bearings

    NARCIS (Netherlands)

    Ligterink, D.J.; Moes, H.

    1980-01-01

    A wear number is defined for ball cup bearings and for journal bearings where the cup and the cylindrical bearing are made of soft material. This dimensionless wear number provides a relation between the following five quantities: the radius of the ball or the length of the journal bearing in

  17. On the "general acceptance" of eyewitness testimony research. A new survey of the experts.

    Science.gov (United States)

    Kassin, S M; Tubb, V A; Hosch, H M; Memon, A

    2001-05-01

    In light of recent advances, this study updated a prior survey of eyewitness experts (S. M. Kassin, P. C. Ellsworth, & V. L. Smith, 1989). Sixty-four psychologists were asked about their courtroom experiences and opinions on 30 eyewitness phenomena. By an agreement rate of at least 80%, there was a strong consensus that the following phenomena are sufficiently reliable to present in court: the wording of questions, lineup instructions, confidence malleability, mug-shot-induced bias, postevent information, child witness suggestibility, attitudes and expectations, hypnotic suggestibility, alcoholic intoxication, the crossrace bias, weapon focus, the accuracy-confidence correlation, the forgetting curve, exposure time, presentation format, and unconscious transference. Results also indicate that these experts set high standards before agreeing to testify. Despite limitations, these results should help to shape expert testimony so that it more accurately represents opinions in the scientific community.

  18. Comparison of High-Flexion Fixed-Bearing and High-Flexion Mobile-Bearing Total Knee Arthroplasties-A Prospective Randomized Study.

    Science.gov (United States)

    Kim, Young-Hoo; Park, Jang-Won; Kim, Jun-Shik

    2018-01-01

    There is none, to our knowledge, about comparison of high-flexion fixed-bearing and high-flexion mobile-bearing total knee arthroplasties (TKAs) in the same patients. The purpose of this study was to determine whether clinical results; radiographic and computed tomographic scan results; and the survival rate of a high-flexion mobile-bearing TKA is better than that of a high-flexion fixed-bearing TKA. The present study consisted of 92 patients (184 knees) who underwent same-day bilateral TKA. Of those, 17 were men and 75 were women. The mean age at the time of index arthroplasty was 61.5 ± 8.3 years (range 52-65 years). The mean body mass index was 26.2 ± 3.3 kg/m 2 (range 23-34 kg/m 2 ). The mean follow-up was 11.2 years (range 10-12 years). The Knee Society knee scores (93 vs 92 points; P = .531) and function scores (80 vs 80 points; P = 1.000), WOMAC scores (14 vs 15 points; P = .972), and UCLA activity scores (6 vs 6 points; P = 1.000) were not different between the 2 groups at 12 years follow-up. There were no differences in any radiographic and CT scan parameters between the 2 groups. Kaplan-Meier survivorship of the TKA component was 98% (95% confidence interval, 93-100) in the high-flexion fixed-bearing TKA group and 99% (95% confidence interval, 94-100) in the high-flexion mobile-bearing TKA group 12 years after the operation. We found no benefit to mobile-bearing TKA in terms of pain, function, radiographic and CT scan results, and survivorship. Longer-term follow-up is necessary to prove the benefit of the high-flexion mobile-bearing TKA over the high-flexion fixed-bearing TKA. Copyright © 2017 Elsevier Inc. All rights reserved.

  19. Measurement of lower limb alignment: there are within-person differences between weight-bearing and non-weight-bearing measurement modalities.

    Science.gov (United States)

    Schoenmakers, Daphne A L; Feczko, Peter Z; Boonen, Bert; Schotanus, Martijn G M; Kort, Nanne P; Emans, Pieter J

    2017-11-01

    Previous studies have compared weight-bearing mechanical leg axis (MLA) measurements to non-weight-bearing measurement modalities. Most of these studies compared mean or median values and did not analyse within-person differences between measurements. This study evaluates the within-person agreement of MLA measurements between weight-bearing full-length radiographs (FLR) and non-weight-bearing measurement modalities (computer-assisted surgery (CAS) navigation or MRI). Two independent observers measured the MLA on pre- and postoperative weight-bearing FLR in 168 patients. These measurements were compared to non-weight-bearing measurements obtained by CAS navigation or MRI. Absolute differences in individual subjects were calculated to determine the agreement between measurement modalities. Linear regression was used to evaluate the possibility that other independent variables impact the differences in measurements. A difference was found in preoperative measurements between FLR and CAS navigation (mean of 2.5° with limit of agreement (1.96 SD) of 6.4°), as well as between FLR and MRI measurements (mean of 2.4° with limit of agreement (1.96 SD) of 6.9°). Postoperatively, the mean difference between MLA measured on FLR compared to CAS navigation was 1.5° (limit of agreement (1.96 SD) of 4.6°). Linear regression analysis showed that weight-bearing MLA measurements vary significantly from non-weight-bearing MLA measurements. Differences were more severe in patients with mediolateral instability (p = 0.010), age (p = 0.049) and ≥3° varus or valgus alignment (p = 0.008). The clinical importance of this study lies in the finding that there are within-person differences between weight-bearing and non-weight-bearing measurement modalities. This has implications for preoperative planning, performing total knee arthroplasty (TKA), and clinical follow-up after TKA surgery using CAS navigation or patient-specific instrumentation. III.

  20. Between memory and silence, the late testimony of a deported homosexual

    Directory of Open Access Journals (Sweden)

    Marcelo Spitzner

    2014-10-01

    Full Text Available http://dx.doi.org/10.5007/2175-7917.2014v19n2p61 This article focuses on the biography of Rudolf Brazda, written by Jean-Luc Schwab. This biography narrates the life and, especially, the deportation of Rudolf Bradzda to the concentration camp of Buchenwald, due to his homosexuality. Brazda was the last pink triangle, title given to homosexuals who were deported to Nazi concentration camps, and one of the few who managed to leave his testimony recorded, even though the writing of another. Thus, I seek in theoretical reflections on history, memory and modernity, a way to point out that narratives such as Brazda’s are delayed or difficult to enter in the collective memory and, therefore, narrate them is configured as struggles against oblivion, silencing and it is a reconstitution of the limits of the historical narrative. Through this text, I propose that history is not made of lines but of wrinkles, the temporality must constantly be revised and that the objective image of collective experience that sustained modernity must be shaken and other genealogies of human experience must be build.

  1. Cool Polar Bears: Dabbing on the Texture

    Science.gov (United States)

    O'Connell, Jean

    2011-01-01

    In this article, the author describes how her second-graders created their cool polar bears. The students used the elements of shape and texture to create the bears. They used Monet's technique of dabbing paint so as to give the bear some texture on his fur.

  2. Superior long-term survival for fixed bearing compared with mobile bearing in ligament-balanced total knee arthroplasty.

    Science.gov (United States)

    Heesterbeek, P J C; van Houten, A H; Klenk, J S; Eijer, H; Christen, B; Wymenga, A B; Schuster, A J

    2018-05-01

    Only few long-term data on ligament-balanced cruciate-retaining total knee arthroplasty (CR TKA) are currently available. Either a mobile- or fixed-bearing insert can be chosen, which showed good mid-term outcome and few complications and revisions. This multi-centre retrospective cross-sectional cohort study investigated the 12-year results of primary TKA using a balancing gap technique and compared survival and clinical outcome between fixed and mobile inserts. In this retrospective cross-sectional cohort study, 557 cases of three clinics (2 Swiss, 1 Dutch) operated between 1998 and 2003 with the first series of a TKA implanted with a balanced gap technique (433 (77.7%) fixed, 124 (22.3%) mobile (anterior-posterior gliding (7-9 mm) and rotational (15°) degrees of freedom) inserts) were included for survival analysis (Kaplan-Meier, by insert type). At the 12-year follow-up (FU) examination of 189 cases, range of motion, knee society score (KSS), numeric rating scale (NRS) for pain and satisfaction were determined and radiographs were evaluated by median tests, by insert type. Of 521 cases available for analysis, 28 (5.4%; 11 fixed, 17 mobile bearing) were revised. Mean cumulative survival after 12.4 years was 97.0% (95% CI 94.7-98.4) for fixed bearings and 85.4% (95% CI 77.5-90.7) after 12.2 years for mobile bearings, p bearings. This study showed a superior survival for fixed bearing compared with mobile bearing in a CR TKA using a ligament-balanced technique after more than 12 years. Clinical outcomes are excellent to good after long-term follow-up, and similar for fixed and mobile bearing. Therapeutic studies-retrospective cohort study, Level III.

  3. On the Design of Tilting-Pad Thrust Bearings

    DEFF Research Database (Denmark)

    Heinrichson, Niels

    2007-01-01

    Pockets are often machined in the surfaces of tilting-pad thrust bearings to allow for hydrostatic jacking in the start-up phase. Pockets and other recesses in the surfaces of bearing pads influence the pressure distribution and thereby the position of the pivot resulting in the most advantageous...... based on the Reynolds equation are used. They include the effects of variations of viscosity with temperature and the deformation of the bearing pads due to pressure and thermal gradients. The models are validated using measurements. Tilting-pad bearings of standard design are studied and the influences...... of the friction loss. Both this bearing and the bearing design with enclosed recesses in the high-pressure regions of the pads suffer from a higher sensitivity to the position of the pivot. The design of such bearing is therefore no trivial task....

  4. Bearing Health Assessment Based on Chaotic Characteristics

    Directory of Open Access Journals (Sweden)

    Chen Lu

    2013-01-01

    Full Text Available Vibration signals extracted from rotating parts of machinery carry a lot of useful information about the condition of operating machine. Due to the strong non-linear, complex and non-stationary characteristics of vibration signals from working bearings, an accurate and reliable health assessment method for bearing is necessary. This paper proposes to utilize the selected chaotic characteristics of vibration signal for health assessment of a bearing by using self-organizing map (SOM. Both Grassberger-Procaccia algorithm and Takens' theory are employed to calculate the characteristic vector which includes three chaotic characteristics, such as correlation dimension, largest Lyapunov exponent and Kolmogorov entropy. After that, SOM is used to map the three corresponding characteristics into a confidence value (CV which represents the health state of the bearing. Finally, a case study based on vibration datasets of a group of testing bearings was conducted to demonstrate that the proposed method can reliably assess the health state of bearing.

  5. Mechanical design problems associated with turbopump fluid film bearings

    Science.gov (United States)

    Evces, Charles R.

    1990-01-01

    Most high speed cryogenic turbopumps for liquid propulsion rocket engines currently use ball or roller contact bearings for rotor support. The operating speeds, loads, clearances, and environments of these pumps combine to make bearing wear a limiting factor on turbopump life. An example is the high pressure oxygen turbopump (HPOTP) used in the Space Shuttle Main Engine (SSME). Although the HPOTP design life is 27,000 seconds at 30,000 rpms, or approximately 50 missions, bearings must currently be replaced after 2 missions. One solution to the bearing wear problem in the HPOTP, as well as in future turbopump designs, is the utilization of fluid film bearings in lieu of continuous contact bearings. Hydrostatic, hydrodynamic, and damping seal bearings are all replacement candidates for contact bearings in rocket engine high speed turbomachinery. These three types of fluid film bearings have different operating characteristics, but they share a common set of mechanical design opportunities and difficulties. Results of research to define some of the mechanical design issues are given. Problems considered include transient strat/stop rub, non-operational rotor support, bearing wear inspection and measurement, and bearing fluid supply route. Emphasis is given to the HPOTP preburner pump (PBP) bearing, but the results are pertinent to high-speed cryogenic turbomachinery in general.

  6. Partial tooth gear bearings

    Science.gov (United States)

    Vranish, John M. (Inventor)

    2010-01-01

    A partial gear bearing including an upper half, comprising peak partial teeth, and a lower, or bottom, half, comprising valley partial teeth. The upper half also has an integrated roller section between each of the peak partial teeth with a radius equal to the gear pitch radius of the radially outwardly extending peak partial teeth. Conversely, the lower half has an integrated roller section between each of the valley half teeth with a radius also equal to the gear pitch radius of the peak partial teeth. The valley partial teeth extend radially inwardly from its roller section. The peak and valley partial teeth are exactly out of phase with each other, as are the roller sections of the upper and lower halves. Essentially, the end roller bearing of the typical gear bearing has been integrated into the normal gear tooth pattern.

  7. What Can We Learn?--The Algonquin Bear Attack.

    Science.gov (United States)

    Strickland, Dan

    1992-01-01

    Describes a bear attack in Algonquin Park in Lake Opeongo (Canada) in which a man and woman were killed. Hypothesizes that the bear deliberately preyed on its victims and concludes that the bear was physically normal. Despite this isolated attack, the chance of being attacked by a black bear when camping is virtually nonexistent. (KS)

  8. 7 CFR 761.53 - Interest bearing accounts.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 7 2010-01-01 2010-01-01 false Interest bearing accounts. 761.53 Section 761.53... AGRICULTURE SPECIAL PROGRAMS GENERAL PROGRAM ADMINISTRATION Supervised Bank Accounts § 761.53 Interest bearing accounts. (a) A supervised bank account, if possible, will be established as an interest bearing deposit...

  9. Active magnetic bearings: As applied to centrifugal pumps

    Science.gov (United States)

    Nelik, Lev; Cooper, Paul; Jones, Graham; Galecki, Dennis; Pinckney, Frank; Kirk, Gordon

    1992-05-01

    Application of magnetic bearings to boiler feed pumps presents various attractive features, such as longer bearing life, lower maintenance costs, and improved operability through control of the rotordynamics. Magnetic bearings were fitted to an eight-stage, 600 hp boiler feed pump, which generates 2600 ft of heat at 680 gpm and 3560 rpm. In addition to the varied and severe operating environment in steady state operation of this pump in a power plant, it is also subjected to transient loads during frequent starts and stops. These loads can now be measured by the in-built instrumentation of the magnetic bearings. Following site installation, a follow-up bearing tune-up was performed, and pump transient response testing was conducted. The bearing response was completely satisfactory, ensuring trouble-free pump operation even in the range of reduced load. The experience gained so far through design and testing proves feasibility of magnetic bearings for boiler feed pumps, which sets the stage for application of even higher energy centrifugal pumps equipped with magnetic bearings.

  10. 49 CFR 230.102 - Tender plain bearing journal boxes.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Tender plain bearing journal boxes. 230.102... Locomotives and Tenders Running Gear § 230.102 Tender plain bearing journal boxes. Plain bearing journal boxes... expected to damage the bearing; or have a detrimental effect on the lubrication of the journal and bearing...

  11. Trichinella and polar bears: a limited risk for humans.

    Science.gov (United States)

    Dupouy-Camet, J; Bourée, P; Yera, H

    2017-07-01

    In this review, we identified 63 cases reported since World War II of human trichinellosis linked to the consumption of parasitized polar bear (Ursus maritimus) meat. This low number contrasts to the numerous cases of human trichinellosis related to consumption of the meat of black (U. americanus) or brown bears (U. arctos). The prevalence of Trichinella infection is high in bears, but larval muscular burden is usually lower in polar bears compared to other bear species. Polar bears, therefore, seem to play a limited role in the transmission of trichinellosis to humans, as native residents living in the Arctic traditionally consume well-cooked bear meat, and travellers and foreign hunters have only limited access to this protected species due to the declining polar bear population.

  12. Public Perceptions of Bears and Management Interventions in Japan

    OpenAIRE

    Sakurai, Ryo; Jacobson, Susan K.

    2011-01-01

    Conservation of bears is a challenge globally. In Japan, Asiatic black bears (Ursus thibetanus) and brown bears (Ursus arctos) are considered a nuisance because of agricultural and property damage and personal human danger due to occasional human casualties. Reduction of human–bear conflicts in Japan would improve long-term conservation of bears and reduce risks to human health and safety. To understand Japanese perceptions of and experience with bears, we analyzed results of 5 public surveys...

  13. Geometric modeling in the problem of ball bearing accuracy

    Science.gov (United States)

    Glukhov, V. I.; Pushkarev, V. V.; Khomchenko, V. G.

    2017-06-01

    The manufacturing quality of ball bearings is an urgent problem for machine-building industry. The aim of the research is to improve the geometric specifications accuracy of bearings based on evidence-based systematic approach and the method of adequate size, location and form deviations modeling of the rings and assembled ball bearings. The present work addressed the problem of bearing geometric specifications identification and the study of these specifications. The deviation from symmetric planar of rings and bearings assembly and mounting width are among these specifications. A systematic approach to geometric specifications values and ball bearings tolerances normalization in coordinate systems will improve the quality of bearings by optimizing and minimizing the number of specifications. The introduction of systematic approach to the international standards on rolling bearings is a guarantee of a significant increase in accuracy of bearings and the quality of products where they are applied.

  14. Foothills model forest grizzly bear study : project update

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2002-01-01

    This report updates a five year study launched in 1999 to ensure the continued healthy existence of grizzly bears in west-central Alberta by integrating their needs into land management decisions. The objective was to gather better information and to develop computer-based maps and models regarding grizzly bear migration, habitat use and response to human activities. The study area covers 9,700 square km in west-central Alberta where 66 to 147 grizzly bears exist. During the first 3 field seasons, researchers captured and radio collared 60 bears. Researchers at the University of Calgary used remote sensing tools and satellite images to develop grizzly bear habitat maps. Collaborators at the University of Washington used trained dogs to find bear scat which was analyzed for DNA, stress levels and reproductive hormones. Resource Selection Function models are being developed by researchers at the University of Alberta to identify bear locations and to see how habitat is influenced by vegetation cover and oil, gas, forestry and mining activities. The health of the bears is being studied by researchers at the University of Saskatchewan and the Canadian Cooperative Wildlife Health Centre. The study has already advanced the scientific knowledge of grizzly bear behaviour. Preliminary results indicate that grizzlies continue to find mates, reproduce and gain weight and establish dens. These are all good indicators of a healthy population. Most bear deaths have been related to poaching. The study will continue for another two years. 1 fig.

  15. Parenting Perfectionism and Parental Adjustment

    OpenAIRE

    Lee, Meghan A.; Schoppe-Sullivan, Sarah J.; Kamp Dush, Claire M.

    2012-01-01

    The parental role is expected to be one of the most gratifying and rewarding roles in life. As expectations of parenting become ever higher, the implications of parenting perfectionism for parental adjustment warrant investigation. Using longitudinal data from 182 couples, this study examined the associations between societal- and self-oriented parenting perfectionism and new mothers’ and fathers’ parenting self-efficacy, stress, and satisfaction. For mothers, societal-oriented parenting perf...

  16. Superconductor bearings, flywheels and transportation

    International Nuclear Information System (INIS)

    Werfel, F N; Floegel-Delor, U; Rothfeld, R; Riedel, T; Goebel, B; Wippich, D; Schirrmeister, P

    2012-01-01

    This paper describes the present status of high temperature superconductors (HTS) and of bulk superconducting magnet devices, their use in bearings, in flywheel energy storage systems (FESS) and linear transport magnetic levitation (Maglev) systems. We report and review the concepts of multi-seeded REBCO bulk superconductor fabrication. The multi-grain bulks increase the averaged trapped magnetic flux density up to 40% compared to single-grain assembly in large-scale applications. HTS magnetic bearings with permanent magnet (PM) excitation were studied and scaled up to maximum forces of 10 kN axially and 4.5 kN radially. We examine the technology of the high-gradient magnetic bearing concept and verify it experimentally. A large HTS bearing is tested for stabilizing a 600 kg rotor of a 5 kWh/250 kW flywheel system. The flywheel rotor tests show the requirement for additional damping. Our compact flywheel system is compared with similar HTS–FESS projects. A small-scale compact YBCO bearing with in situ Stirling cryocooler is constructed and investigated for mobile applications. Next we show a successfully developed modular linear Maglev system for magnetic train operation. Each module levitates 0.25t at 10 mm distance during one-day operation without refilling LN 2 . More than 30 vacuum cryostats containing multi-seeded YBCO blocks are fabricated and are tested now in Germany, China and Brazil.

  17. Superconducting Meissner effect bearings for cryogenic turbomachines, phase 2

    Science.gov (United States)

    Valenzuela, Javier A.; Martin, Jerry L.

    1994-02-01

    This is the final report of a Phase 2 SBIR project to develop Meissner effect bearings for miniature cryogenic turbomachines. The bearing system was designed for use in miniature cryogenic turboexpanders in reverse-Brayton-cycle cryocoolers. The cryocoolers are designed to cool sensors on satellites. Existing gas bearings for this application run in a relatively warm state. The heat loss from the bearings into the shaft and into the cold process gas imposes a penalty on the cycle efficiency. By using cold Meissner effect bearings, this heat loss could be minimized, and the input power per unit of cooling for these cryocoolers could be reduced. Two bearing concepts were explored in this project. The first used an all-magnetic passive radial suspension to position the shaft over a range of temperatures from room temperature to 77 K. This bearing concept was proven to be feasible, but impractical for the miniature high-speed turbine application since it lacked the required shaft positioning accuracy. A second bearing concept was then developed. In this concept, the Meissner effect bearings are combined with self-acting gas bearings. The Meissner effect bearing provides the additional stiffness and damping required to stabilize the shaft at low temperature, while the gas bearing provides the necessary accuracy to allow very small turbine tip clearances (5mm) and high speeds (greater than 500,000 rpm).

  18. Early encounters between China and Africa: myth or moment ...

    African Journals Online (AJOL)

    China did indeed have a highly advanced ship building capacity long before the dawn of the West's global age of sail, and archaeological evidence bears testimony to the sophistication of Chinese maritime technology. The article also focuses on the voyages of the legendary Grand Eunuch , Admiral Cheng Ho, undertaken ...

  19. Preface

    DEFF Research Database (Denmark)

    Andersen, Lars Døvling; Rodger, C.

    2009-01-01

    This issue is a collection of papers dedicated to Anthony Hilton on the occasion of his retirement. The variety of topics bears testimony to the broad scope of Anthony's research, and the quality of the contributions witnesses to the impact his work has had on high class mathematicians in many...

  20. Agricultural Policy Analysis Studies in Tanzania: A Historical and ...

    African Journals Online (AJOL)

    2005-07-22

    Jul 22, 2005 ... these issues and the implications for agricultural development ... and financial markets bear testimony to this. .... the ratio of maize-producer price to input prices ... per person-day and the profitability of food ..... economic under-performance of the reforms to ... farmers to take up farming as a business through.

  1. 29 CFR 780.124 - Raising of fur-bearing animals.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 3 2010-07-01 2010-07-01 false Raising of fur-bearing animals. 780.124 Section 780.124... General Scope of Agriculture Raising of Livestock, Bees, Fur-Bearing Animals, Or Poultry § 780.124 Raising of fur-bearing animals. (a) The term “fur-bearing animals” has reference to animals which bear fur of...

  2. Polar bears and sea ice habitat change

    Science.gov (United States)

    Durner, George M.; Atwood, Todd C.; Butterworth, Andy

    2017-01-01

    The polar bear (Ursus maritimus) is an obligate apex predator of Arctic sea ice and as such can be affected by climate warming-induced changes in the extent and composition of pack ice and its impacts on their seal prey. Sea ice declines have negatively impacted some polar bear subpopulations through reduced energy input because of loss of hunting habitats, higher energy costs due to greater ice drift, ice fracturing and open water, and ultimately greater challenges to recruit young. Projections made from the output of global climate models suggest that polar bears in peripheral Arctic and sub-Arctic seas will be reduced in numbers or become extirpated by the end of the twenty-first century if the rate of climate warming continues on its present trajectory. The same projections also suggest that polar bears may persist in the high-latitude Arctic where heavy multiyear sea ice that has been typical in that region is being replaced by thinner annual ice. Underlying physical and biological oceanography provides clues as to why polar bear in some regions are negatively impacted, while bears in other regions have shown no apparent changes. However, continued declines in sea ice will eventually challenge the survival of polar bears and efforts to conserve them in all regions of the Arctic.

  3. Hybrid bearings for LH2 and LO2 turbopumps

    Science.gov (United States)

    Butner, M. F.; Lee, F. C.

    1985-01-01

    Hybrid combinations of hydrostatic and ball bearings can improve bearing performance for liquid hydrogen and liquid oxygen turbopumps. Analytic studies were conducted to optimize hybrid bearing designs for the SSME-type turbopump conditions. A method to empirically determine damping coefficients was devised. Four hybrid bearing configurations were designed, and three were fabricated. Six hybrid and hydrostatic-only bearing configurations will be tested for steady-state and transient performance, and quantification of damping coefficients. The initial tests were conducted with the liquid hydrogen bearing.

  4. Evaluation of ball and roller bearings restored by grinding

    Science.gov (United States)

    Parker, R. J.; Zaretsky, E. V.; Chen, S. M.

    1976-01-01

    A joint program was undertaken to restore by grinding those rolling-element bearings which are currently being discarded at aircraft engine and transmission overhaul. Three bearing types were selected from the UH-1 helicopter engine (T-53) and transmission for the pilot program. Groups of each of these bearings were visually and dimensionally inspected for suitability for restoration. A total of 250 bearings were restored by grinding. Of this number, 30 bearings from each type were endurance tested to a TBO of 1600 hours. No bearing failures occurred related to the restoration by grinding process. The two bearing failures which occurred were due to defective rolling elements and were typical of those which may occur in new bearings. The restorable component yield to the three groups was in excess of 90 percent.

  5. Cyclodextrin Nanoparticles Bearing 8-Hydroxyquinoline Ligands as Multifunctional Biomaterials.

    Science.gov (United States)

    Oliveri, Valentina; Bellia, Francesco; Vecchio, Graziella

    2017-03-28

    Cyclodextrins are used as building blocks for the development of a host of polymeric biomaterials. The cyclodextrin polymers have found numerous applications as they exhibit unique features such as mechanical properties, stimuli responsiveness and drug loading ability. Notwithstanding the abundance of cyclodextrin polymers studied, metal-chelating polymers based on cyclodextrins have been poorly explored. Herein we report the synthesis and the characterization of the first metal-chelating β-cyclodextrin polymer bearing 8-hydroxyquinoline ligands. The metal ions (Cu 2+ or Zn 2+ ) can modulate the assembly of the polymer nanoparticles. Moreover, the protective activity of the new chelating polymer against self- and metal-induced Aβ aggregation and free radical species are significantly higher than those of the parent compounds. These synergistic effects suggest that the incorporation of hydroxyquinoline moieties into a soluble β-cyclodextrin polymer could represent a promising strategy to design multifunctional biomaterials. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  6. The dynamic state monitoring of bearings system

    Directory of Open Access Journals (Sweden)

    Marek Krynke

    2015-03-01

    Full Text Available The article discusses the methods of dynamic state monitoring of bearings system. A vibration signal contains important technical information about the machine condition and is currently the most frequently used in diagnostic bearings systems. One of the main ad-vantages of machine condition monitoring is identifying the cause of failure of the bearings and taking preventative measures, otherwise the operation of such a machine will lead to frequent replacement of the bearings. Monitoring changes in the course of the operation of machin-ery repair strategies allows keeping the conditioned state of dynamic failure conditioned preventive repairs and repairs after-failure time. In addition, the paper also presents the fundamental causes of bearing failure and identifies mechanisms related to the creation of any type of damage.

  7. Integrated smart bearings for next generation aero-engines Part 1: Development of a sensor suite for automatic bearing health monitoring

    OpenAIRE

    Bashir, Imran; Wang, Ling; Harvey, Terence; Zaghari, Bahareh; Weddell, Alexander; White, Neil

    2017-01-01

    The development of smart bearing solutions will contribute to increased aircraft engine reliability, allowing the early detection of bearing failure through robust health monitoring. This project aims to develop intelligent bearing systems for an Ultra High Propulsion Efficiency (UHPE) ground test demonstrator, where a fully integrated self-powered wireless sensing system will be developed for future aircraft. This paper provides a comprehensive review of the state-of-the-art smart bearing te...

  8. Distributed bearing fault diagnosis based on vibration analysis

    Science.gov (United States)

    Dolenc, Boštjan; Boškoski, Pavle; Juričić, Đani

    2016-01-01

    Distributed bearing faults appear under various circumstances, for example due to electroerosion or the progression of localized faults. Bearings with distributed faults tend to generate more complex vibration patterns than those with localized faults. Despite the frequent occurrence of such faults, their diagnosis has attracted limited attention. This paper examines a method for the diagnosis of distributed bearing faults employing vibration analysis. The vibrational patterns generated are modeled by incorporating the geometrical imperfections of the bearing components. Comparing envelope spectra of vibration signals shows that one can distinguish between localized and distributed faults. Furthermore, a diagnostic procedure for the detection of distributed faults is proposed. This is evaluated on several bearings with naturally born distributed faults, which are compared with fault-free bearings and bearings with localized faults. It is shown experimentally that features extracted from vibrations in fault-free, localized and distributed fault conditions form clearly separable clusters, thus enabling diagnosis.

  9. 49 CFR 215.115 - Defective roller bearing.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Defective roller bearing. 215.115 Section 215.115... § 215.115 Defective roller bearing. (a) A railroad may not place or continue in service a car, if the car has— (1) A roller bearing that shows signs of having been overheated as evidenced by— (i...

  10. Trends in Controllable Oil Film Bearings

    DEFF Research Database (Denmark)

    Santos, Ilmar

    2011-01-01

    This work gives an overview about the theoretical and experimental achievements of mechatronics applied to oil film bearings, with the aim of: controlling the lateral vibration of flexible rotating shafts; modifying bearing dynamic characteristics, as stiffness and damping properties; increasing......" components and be applied to rotating machines with the goal of avoiding unexpected stops of plants, performing rotordynamic tests and identifying model parameters "on site". Emphasis is given to the controllable lubrication (active lubrication) applied to different types of oil film bearings, i...

  11. Polar bears: the fate of an icon.

    Science.gov (United States)

    Fitzgerald, Kevin T

    2013-11-01

    Polar bears are one of the most iconic animals on our planet. Worldwide, even people who would never see one are drawn to these charismatic arctic ice hunters. They are the world's largest terrestrial carnivore, and despite being born on land, they spend most of their lives out on the sea ice and are considered a marine mammal. Current global studies estimate there are around 20,000 animals in some 19 discrete circumpolar populations. Aside from pregnant females denning in the winter months to give birth, the white bears do not hibernate. They spend their winters on the sea ice hunting seals, an activity they are spectacularly adapted for. Research on these animals is incredibly difficult because of the inhospitable surroundings they inhabit and how inaccessible they make the bears. For many years, the sum of our understanding of the natural history of polar bears came from tracks, scats, the remains of their kills, abandoned dens, and anecdotal observations of native hunters, explorers, and early biologists. Nonetheless, the last 40 years have seen a much better picture of their biology emerge thanks to, first, dedicated Canadian researchers and, later, truly international efforts of workers from many countries. Veterinarians have contributed to our knowledge of the bears by delivering and monitoring anesthesia, obtaining blood samples, performing necropsies, investigating their reproduction, conducting radiotelemetry studies, and examining their behavior. Recently, new technologies have been developed that revolutionize the study of the lives and natural history of undisturbed polar bears. These advances include better satellite radiotelemetry equipment and the development of remote-controlled miniature devices equipped with high-definition cameras. Such new modalities provide dramatic new insights into the life of polar bears. The remarkable degree of specialized adaptation to life on the sea ice that allowed the bears to be successful is the very reason that

  12. Lubrication of Space Shuttle Main Engine Turbopump Bearings

    Science.gov (United States)

    Gibson, Howard; Munafo, Paul (Technical Monitor)

    2001-01-01

    The Space Shuttle has three main engines that are used for propulsion into orbit. These engines are fed propellants by four turbopumps on each engine. A main element in the turbopump is the bearings supporting the rotor that spins the turbine blades and the pump impeller. These bearings are required to spin at very high speeds, support radial and thrust loads, and have high wear resistance without the benefit of lubrication. The liquid hydrogen and oxygen propellants flow through the bearings to cool the surfaces. The volatile nature of the propellants excludes any conventional means of lubrication. Lubrication for these bearings is provided by the ball separator inside the bearing. The separator is a composite material that supplies a transfer film of lubrication to the rings and balls. New separator materials and lubrication schemes have been investigated at Marshall Space Flight Center in a bearing test rig with promising results. Hybrid bearings with silicon nitride balls have also been evaluated. The use of hybrid, silicon nitride ball bearings in conjunction -with better separator materials has shown excellent results. The work that Marshall has done is being utilized in turbopumps flying on the space shuttle fleet and will be utilized in future space travel. This result of this work is valuable for all aerospace and commercial applications where high-speed bearings are used.

  13. Centrifuge advances using HTS magnetic bearings

    Science.gov (United States)

    Werfel, F. N.; Flögel-Delor, U.; Rothfeld, R.; Wippich, D.; Riedel, T.

    2001-05-01

    Passive magnetic bearings are of increasing technical interest. We performed experiments with centrifugal rotors to analyze gyroscopic forces in terms imbalance, rotor elasticity and damping. Centrifuge rotors need to be operated soft and stable without whirling the sediments. In order to evaluate optimal parameters critical and resonance behaviors are investigated. Eccentricities up 2 mm are safely passed by accelerating test wheels. In a simple model we describe the effect of passing critical rotational speeds. Measurements of bearing properties and wheel performance are presented. We have constructed a first prototype centrifuge designed with a HTS double bearing which operates a titanium rotor safely up to 30 000 rpm. A 15 W Stirling cooler serves cryogenics of the YBCO stators. From the experiments design guidelines for centrifugal applications with HTS bearings are given.

  14. Bear bile: dilemma of traditional medicinal use and animal protection

    Directory of Open Access Journals (Sweden)

    Nagamatsu Tadashi

    2009-01-01

    Full Text Available Abstract Bear bile has been used in Traditional Chinese Medicine (TCM for thousands of years. Modern investigations showed that it has a wide range of pharmacological actions with little toxicological side effect and the pure compounds have been used for curing hepatic and biliary disorders for decades. However, extensive consumption of bear bile made bears endangered species. In the 1980's, bear farming was established in China to extract bear bile from living bears with "Free-dripping Fistula Technique". Bear farming is extremely inhumane and many bears died of illness such as chronic infections and liver cancer. Efforts are now given by non-governmental organizations, mass media and Chinese government to end bear farming ultimately. At the same time, systematic research has to be done to find an alternative for bear bile. In this review, we focused on the literature, laboratory and clinical results related to bear bile and its substitutes or alternative in English and Chinese databases. We examined the substitutes or alternative of bear bile from three aspects: pure compounds derived from bear bile, biles from other animals and herbs from TCM. We then discussed the strategy for stopping the trading of bear bile and issues of bear bile related to potential alternative candidates, existing problems in alternative research and work to be done in the future.

  15. Bear bile: dilemma of traditional medicinal use and animal protection

    Science.gov (United States)

    Feng, Yibin; Siu, Kayu; Wang, Ning; Ng, Kwan-Ming; Tsao, Sai-Wah; Nagamatsu, Tadashi; Tong, Yao

    2009-01-01

    Bear bile has been used in Traditional Chinese Medicine (TCM) for thousands of years. Modern investigations showed that it has a wide range of pharmacological actions with little toxicological side effect and the pure compounds have been used for curing hepatic and biliary disorders for decades. However, extensive consumption of bear bile made bears endangered species. In the 1980's, bear farming was established in China to extract bear bile from living bears with "Free-dripping Fistula Technique". Bear farming is extremely inhumane and many bears died of illness such as chronic infections and liver cancer. Efforts are now given by non-governmental organizations, mass media and Chinese government to end bear farming ultimately. At the same time, systematic research has to be done to find an alternative for bear bile. In this review, we focused on the literature, laboratory and clinical results related to bear bile and its substitutes or alternative in English and Chinese databases. We examined the substitutes or alternative of bear bile from three aspects: pure compounds derived from bear bile, biles from other animals and herbs from TCM. We then discussed the strategy for stopping the trading of bear bile and issues of bear bile related to potential alternative candidates, existing problems in alternative research and work to be done in the future. PMID:19138420

  16. Big bearings. Unsung hero; Kyodaina jikuuke. Hitome ni tsukanai hatarakimono

    Energy Technology Data Exchange (ETDEWEB)

    Nanba, S. [Koyo Seiko Co. Ltd., Osaka (Japan)

    1997-03-05

    This paper introduces examples of the use of big bearings. Bearings are divided largely into those used for radial load supporting and those used for thrust load supporting, while big bearings are often used for the latter usage. Thrust bearings include a cutter heat supporting bearing for tunnel excavator working underground, in addition to those used for swing motion of parabolic antennas and tower cranes. A bearing used in an excavator has an outer diameter of about half that of the excavator. The outer diameter of a shielding machine practically used in tunnel drilling currently has an outer diameter of 14,140 mm, and the outer diameter of the bearing is 7200 mm (bearing weighing 45 tons). Other big thrust bearings may include a swing tower swinging thrust bearing used in a continuous casting facility. Big radial bearings are used in iron and steel making facilities. This paper describes two examples of bearings used in this application. A spherical roller bearing to support converter trunion should be of an ultra big size to withstand total weight of about 1400 tons composed of a converter weight and weight of steel to be processed. A four-row cylindrical roller bearing to support the backup roll of a thick plate rolling mill is a bearing with durability against large loads to support reduction rolls whose size have become increasingly large. 2 refs., 5 figs.

  17. Oak-Black Bear Relationships in Southeastern Uplands

    Science.gov (United States)

    Joseph D. Clark

    2004-01-01

    Bears (Ursus americanus) primarily occur in upland habitats in the Southeast because uplands were the last to be developed for agriculture and were more likely to become publicly owned. National parks and forests created in the early to mid-1900s served as sources to supply surrounding uplands with bears. Bears could not survive in southeastern...

  18. 49 CFR 215.111 - Defective plain bearing.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Defective plain bearing. 215.111 Section 215.111... § 215.111 Defective plain bearing. A railroad may not place or continue in service a car, if the car has a plain bearing— (a) That is missing, cracked, or broken; (b) On which the bearing liner— (1) Is...

  19. Engaging Parents in Preventive Interventions for Young Children: Working with Cultural Diversity Within Low-Income, Urban Neighborhoods.

    Science.gov (United States)

    Dawson-McClure, Spring; Calzada, Esther J; Brotman, Laurie M

    2017-08-01

    A robust literature documents the impact of poverty on child development and lifelong health, well-being and productivity. Racial and ethnic minority children continue to bear the burden of poverty disproportionately. Evidence-based parenting interventions in early childhood have the potential to attenuate risk attributable to poverty and stress. To reduce racial, ethnic, and socioeconomic disparities in the USA, parenting interventions must be accessible, engaging, and effective for low-income families of color living in large urban centers. This paper describes the initial development of ParentCorps and ongoing improvements to realize that vision. Initial development focused on creating a parenting intervention that places culture at the center and effectively embedding it in schools. ParentCorps includes core components found in nearly all effective parenting interventions with a culturally informed approach to engaging families and supporting behavior change. As the intervention is implemented at scale in increasingly diverse communities, improvement efforts include augmenting professional development to increase racial consciousness among all staff (evaluators, coaches, and school-based facilitators) and applying an implementation science framework to study and more fully support schools' use of a package of engagement strategies.

  20. Reducing the Number of Uninsured Children: Outreach and Enrollment Efforts. Testimony of Donna Cohen Ross, Center on Budget and Policy Priorities, before the Senate Finance Committee.

    Science.gov (United States)

    Ross, Donna Cohen

    This testimony of Donna Cohen Ross describes the Center on Budget and Policy Priorities' work to reduce the number of uninsured children. The Center specializes in programs and policies affecting low- and moderate-income families, including issues related to health coverage for the uninsured. It works with many groups on strategies to identify…

  1. Technical Development Path for Gas Foil Bearings

    Science.gov (United States)

    Dellacorte, Christopher

    2016-01-01

    Foil gas bearings are in widespread commercial use in air cycle machines, turbocompressors and microturbine generators and are emerging in more challenging applications such as turbochargers, auxiliary power units and propulsion gas turbines. Though not well known, foil bearing technology is well over fifty years old. Recent technological developments indicate that their full potential has yet to be realized. This paper investigates the key technological developments that have characterized foil bearing advances. It is expected that a better understanding of foil gas bearing development path will aid in future development and progress towards more advanced applications.

  2. Parenting children with down syndrome: An analysis of parenting styles, parenting dimensions, and parental stress.

    Science.gov (United States)

    Phillips, B Allyson; Conners, Frances; Curtner-Smith, Mary Elizabeth

    2017-09-01

    Effective parenting is vital for a child's development. Although much work has been conducted on parenting typically developing children, little work has examined parenting children with Down syndrome. The purpose of the current study was to compare the parenting styles and dimensions in mothers of children with DS and mothers of TD children. Thirty-five mothers of children with DS and 47 mothers of TD children completed questionnaires about parenting, parental stress, child behavior problems, and child executive function. We found that mothers of children with DS use an authoritative parenting style less and a permissive parenting style more than mothers of TD children. Additionally, we found that mothers of children with DS use reasoning/induction and verbal hostility less and ignoring misbehavior more than mothers of TD children. All of these differences, except for those of reasoning/induction, were at least partially accounted for by the higher levels of parental stress in the DS group. Parenting interventions should be focused on reducing parental stress and training mothers to parent under stress in an effort to improve parenting techniques, which would, in theory, improve long-term child outcomes for children with DS. Copyright © 2017 Elsevier Ltd. All rights reserved.

  3. Grizzly bear diet shifting on reclaimed mines

    Directory of Open Access Journals (Sweden)

    Bogdan Cristescu

    2015-07-01

    Full Text Available Industrial developments and reclamation change habitat, possibly altering large carnivore food base. We monitored the diet of a low-density population of grizzly bears occupying a landscape with open-pit coal mines in Canada. During 2009–2010 we instrumented 10 bears with GPS radiocollars and compared their feeding on reclaimed coal mines and neighboring Rocky Mountains and their foothills. In addition, we compared our data with historical bear diet for the same population collected in 2001–2003, before extensive mine reclamation occurred. Diet on mines (n=331 scats was dominated by non-native forbs and graminoids, while diets in the Foothills and Mountains consisted primarily of ungulates and Hedysarum spp. roots respectively, showing diet shifting with availability. Field visitation of feeding sites (n=234 GPS relocation clusters also showed that ungulates were the main diet component in the Foothills, whereas on reclaimed mines bears were least carnivorous. These differences illustrate a shift to feeding on non-native forbs while comparisons with historical diet reveal emergence of elk as an important bear food. Food resources on reclaimed mines attract bears from wilderness areas and bears may be more adaptable to landscape change than previously thought. The grizzly bear’s ready use of mines cautions the universal view of this species as umbrella indicative of biodiversity.

  4. Diet and Macronutrient Optimization in Wild Ursids: A Comparison of Grizzly Bears with Sympatric and Allopatric Black Bears.

    Science.gov (United States)

    Costello, Cecily M; Cain, Steven L; Pils, Shannon; Frattaroli, Leslie; Haroldson, Mark A; van Manen, Frank T

    2016-01-01

    When fed ad libitum, ursids can maximize mass gain by selecting mixed diets wherein protein provides 17 ± 4% of digestible energy, relative to carbohydrates or lipids. In the wild, this ability is likely constrained by seasonal food availability, limits of intake rate as body size increases, and competition. By visiting locations of 37 individuals during 274 bear-days, we documented foods consumed by grizzly (Ursus arctos) and black bears (Ursus americanus) in Grand Teton National Park during 2004-2006. Based on published nutritional data, we estimated foods and macronutrients as percentages of daily energy intake. Using principal components and cluster analyses, we identified 14 daily diet types. Only 4 diets, accounting for 21% of days, provided protein levels within the optimal range. Nine diets (75% of days) led to over-consumption of protein, and 1 diet (3% of days) led to under-consumption. Highest protein levels were associated with animal matter (i.e., insects, vertebrates), which accounted for 46-47% of daily energy for both species. As predicted: 1) daily diets dominated by high-energy vertebrates were positively associated with grizzly bears and mean percent protein intake was positively associated with body mass; 2) diets dominated by low-protein fruits were positively associated with smaller-bodied black bears; and 3) mean protein was highest during spring, when high-energy plant foods were scarce, however it was also higher than optimal during summer and fall. Contrary to our prediction: 4) allopatric black bears did not exhibit food selection for high-energy foods similar to grizzly bears. Although optimal gain of body mass was typically constrained, bears usually opted for the energetically superior trade-off of consuming high-energy, high-protein foods. Given protein digestion efficiency similar to obligate carnivores, this choice likely supported mass gain, consistent with studies showing monthly increases in percent body fat among bears in this

  5. Stepping-Motion Motor-Control Subsystem For Testing Bearings

    Science.gov (United States)

    Powers, Charles E.

    1992-01-01

    Control subsystem closed-loop angular-position-control system causing motor and bearing under test to undergo any of variety of continuous or stepping motions. Also used to test bearing-and-motor assemblies, motors, angular-position sensors including rotating shafts, and like. Monitoring subsystem gathers data used to evaluate performance of bearing or other article under test. Monitoring subsystem described in article, "Monitoring Subsystem For Testing Bearings" (GSC-13432).

  6. Noise reduction of rotating machinery by viscoelastic bearing supports

    NARCIS (Netherlands)

    Tillema, H.G.

    2003-01-01

    The demand for silent rolling bearing applications, such as electric motors and gearboxes, has resulted in an investigation of viscoelastic bearing supports. By placing a thin viscoelastic layer between the bearing outer ring and the surrounding structure, vibrations of the shaft-bearing arrangement

  7. Polar bear attacks on humans: Implications of a changing climate

    Science.gov (United States)

    Wilder, James; Vongraven, Dag; Atwood, Todd C.; Hansen, Bob; Jessen, Amalie; Kochnev, Anatoly A.; York, Geoff; Vallender, Rachel; Hedman, Daryll; Gibbons, Melissa

    2017-01-01

    Understanding causes of polar bear (Ursus maritimus) attacks on humans is critical to ensuring both human safety and polar bear conservation. Although considerable attention has been focused on understanding black (U. americanus) and grizzly (U. arctos) bear conflicts with humans, there have been few attempts to systematically collect, analyze, and interpret available information on human-polar bear conflicts across their range. To help fill this knowledge gap, a database was developed (Polar Bear-Human Information Management System [PBHIMS]) to facilitate the range-wide collection and analysis of human-polar bear conflict data. We populated the PBHIMS with data collected throughout the polar bear range, analyzed polar bear attacks on people, and found that reported attacks have been extremely rare. From 1870–2014, we documented 73 attacks by wild polar bears, distributed among the 5 polar bear Range States (Canada, Greenland, Norway, Russia, and United States), which resulted in 20 human fatalities and 63 human injuries. We found that nutritionally stressed adult male polar bears were the most likely to pose threats to human safety. Attacks by adult females were rare, and most were attributed to defense of cubs. We judged that bears acted as a predator in most attacks, and that nearly all attacks involved ≤2 people. Increased concern for both human and bear safety is warranted in light of predictions of increased numbers of nutritionally stressed bears spending longer amounts of time on land near people because of the loss of their sea ice habitat. Improved conflict investigation is needed to collect accurate and relevant data and communicate accurate bear safety messages and mitigation strategies to the public. With better information, people can take proactive measures in polar bear habitat to ensure their safety and prevent conflicts with polar bears. This work represents an important first step towards improving our understanding of factors influencing

  8. Nuclear fuel handling grapple carriage with self-lubricating bearing

    International Nuclear Information System (INIS)

    Wade, E.E.

    1978-01-01

    Disclosed is a nuclear fuel handling grapple carriage having a bearing with a lubricant reservoir that is capable of being refilled when the bearing and reservoir are submerged in a lubricant pool. The lubricant reservoir supplies lubricant to the bearing while the bearing allows a small amount of lubricant to leak passed appropriately placed seals creating a positive out flow of lubricant thereby preventing foreign material from entering the bearing

  9. Humanism of the Nigerian womanist: a cultural appraisal of Femi ...

    African Journals Online (AJOL)

    The evolution of global societies in this age is taking alarmingly negative turns that seem to be catapulting the world into inevitable self-destruction. The incessant violence, terror, horror, disease and deprivation that have enveloped most societies in the world bear testimony to that. Within the Cultural context of the Nigerian ...

  10. Bearing load distribution studies in a multi bearing rotor system and a remote computing method based on the internet

    International Nuclear Information System (INIS)

    Yang, Zhao Jian; Peng, Ze Jun; Kim, Seock Sam

    2004-01-01

    A model in the form of a Bearing Load Distribution (BLD) matrix in the Multi Bearing Rotor System (MBRS) is established by a transfer matrix equation with the consideration of a bearing load, elevation and uniform load distribution. The concept of Bearing Load Sensitivity (BLS) is proposed and matrices for load and elevation sensitivity are obtained. In order to share MBRS design resources on the internet with remote customers, the basic principle of Remote Computing (RC) based on the internet is introduced ; the RC of the BLD and BLS is achieved by Microsoft Active Server Pages (ASP) technology

  11. Immobilization of Wyoming bears using carfentanil and xylazine.

    Science.gov (United States)

    Kreeger, Terry J; Bjornlie, Dan; Thompson, Dan; Clapp, Justin; Clark, Colby; Hansen, Cole; Huizenga, Matt; Lockwood, Sam

    2013-07-01

    Seven grizzly (Ursus arctos; four male, three female) and three black (Ursus americanus; two male, one female) bears caught in culvert traps or leg snares were immobilized in northwestern Wyoming with carfentanil and xylazine at doses, respectively, of 0.011 ± 0.001 and 0.12 ± 0.01 mg/kg for grizzly bears and 0.014 ± 0.002 and 0.15 ± 0.04 mg/kg for black bears. These drugs were antagonized with 1 mg/kg naltrexone and 2 mg/kg tolazoline. Induction and recovery times, respectively, were 4.3 ± 0.5 and 7.1 ± 0.8 min for grizzly bears and 5.2 ± 0.4 and 9.1 ± 2.2 min for black bears. Inductions were smooth and uneventful. Recoveries were characterized initially by increased respiration followed by raising of the head, which quickly led to a full recovery, with the bears recognizing and avoiding humans and moving away, maneuvering around obstacles. All bears experienced respiratory depression, which did not significantly improve with supplemental oxygen on the basis of pulse oximetry (P=0.56). Rectal temperatures were normothermic. Carfentanil-xylazine immobilization of bears provided significant advantages over other drug regimens, including small drug volumes, predictable inductions, quick and complete recoveries, and lower costs. On the basis of these data, both grizzly and black bears can be immobilized effectively with 0.01 mg/kg carfentanil and 0.1 mg/kg xylazine.

  12. Targeting Faulty Bearings for an Ocean Turbine Dynamometer

    Directory of Open Access Journals (Sweden)

    David J. Vendittis

    2013-01-01

    Full Text Available A real-time, vibrations-based condition monitoring method used to detect, localize, and identify a faulty bearing in an ocean turbine electric motor is presented in this paper. The electric motor is installed in a dynamometer emulating the functions of the actual ocean turbine. High frequency modal analysis and power trending are combined to assess the operational health of the dynamometer’s bearings across an array of accelerometers. Once a defect has been detected, envelope analysis is used to identify the exact bearing containing the defect. After a brief background on bearing fault detection, this paper introduces a simplified mathematical model of the bearing fault, followed with the signal processing approach used to detect, locate, and identify the fault. In the results section, effectiveness of the methods of bearing fault detection presented in this paper is demonstrated through processing data collected, first, from a controlled lathe setup and, second, from the dynamometer. By mounting a bearing containing a defect punched into its inner raceway to a lathe and placing an array of accelerometers along the length of lathe, the bearing fault is clearly detected, localized, and identified as an inner raceway defect. Through retroactively trending the data leading to the near-failure of one of the electric motors in the dynamometer, the authors identified a positive trend in energy levels for a specific frequency band present across the array of accelerometers and identify two bearings as possible sources of the fault.

  13. Hydrostatic radial bearing of centrifugal pump

    International Nuclear Information System (INIS)

    Skalicky, A.

    1976-01-01

    A hydrostatic radial pump is described characterized by the fact that part of the medium off-taken from delivery is used as a lubricating medium. Two additional bodies are placed alongside a hydrostatic bearing with coils in between them and the pump shaft; the coils have an opposite pitch. The feed channel for the hydrostatic bearing pocket is linked to delivery. The coil outlets are connected to the pump suction unit. Two rotating coils placed alongside the hydrostatic bearing will considerably simplify the communication channel design and reduce the dependence on the pump shaft deflections. The addition of another rotating coil in the close vicinity of the pump shaft or directly on the shaft further increases the efficiency. The bearing can be used in designing vertical circulating pumps for the cooling circuits of nuclear reactors. (J.B.)

  14. Mobilizing Conflict Testimony: A Lens of Mobility for the Study of Documentary Practices in the Kashmir Conflict

    Directory of Open Access Journals (Sweden)

    Max Kramer

    2017-08-01

    Full Text Available In this paper I introduce a lens of mobility for the study of documentary film practices and gender in zones of conflict. By drawing on my qualitative research regarding the practice of the independent filmmaker Iffat Fatima, I will argue that a lens of mobility helps to grasp highly mobile media practices both conceptually and methodologically. Through a lens of mobility, my focus lies on the potential of documentary film to open the imaginative boundaries of conflict zones and to politically and emotionally mobilize the testimony offered from everyday life in a highly militarized zone. This specifically requires the tracing of moments of political mobilization beyond cognitive questions of conflicting narratives and representations.

  15. Simulating fullerene ball bearings of ultra-low friction

    International Nuclear Information System (INIS)

    Li Xiaoyan; Yang Wei

    2007-01-01

    We report the direct molecular dynamics simulations for molecular ball bearings composed of fullerene molecules (C 60 and C 20 ) and multi-walled carbon nanotubes. The comparison of friction levels indicates that fullerene ball bearings have extremely low friction (with minimal frictional forces of 5.283 x 10 -7 and 6.768 x 10 -7 nN/atom for C 60 and C 20 bearings) and energy dissipation (lowest dissipation per cycle of 0.013 and 0.016 meV/atom for C 60 and C 20 bearings). A single fullerene inside the ball bearings exhibits various motion statuses of mixed translation and rotation. The influences of the shaft's distortion on the long-ranged potential energy and normal force are discussed. The phonic dissipation mechanism leads to a non-monotonic function between the friction and the load rate for the molecular bearings

  16. Development of AE monitoring system for journal bearing

    International Nuclear Information System (INIS)

    Yoon, Dong Jin; Kwon, Oh Yang; Chung, Min Hwa

    1994-01-01

    For the purpose of monitoring of the bearing conditions in rotating machinery, a system for journal bearing diagnosis by AE was developed. Acoustic emission technique is used to detect abnormal conditions in the bearing system. And various data such as AE events, rms voltage level of AE signals, and AE parameters were acquired during experiments with the simulated journal bearing system. Based on the above results and practical application for power plant, algorithms and judgement criteria for diagnosis system was accomplished. Bearing diagnosis system is composed of four parts as follows : sensing part for AE sensor and preamplifier, signal processing part for rms-to-dc converting to measure AE rms voltage, interface part for connecting rms signal to PC using A/D converter, graphic display and software part for display of bearing condition and for managing of diagnosis program.

  17. Fault tolerant homopolar magnetic bearings with flux invariant control

    International Nuclear Information System (INIS)

    Na, Uhn Joo

    2006-01-01

    The theory for a novel fault-tolerant 4-active-pole homopolar magnetic bearing is developed. If any one coil of the four coils in the bearing actuator fail, the remaining three coil currents change via an optimal distribution matrix such that the same opposing pole, C-core type, control fluxes as those of the un-failed bearing are produced. The homopolar magnetic bearing thus provides unaltered magnetic forces without any loss of the bearing load capacity even if any one coil suddenly fails. Numerical examples are provided to illustrate the novel fault-tolerant, 4-active pole homopolar magnetic bearings

  18. Active Vibration Control of Hydrodynamic Journal Bearings

    Science.gov (United States)

    Tůma, J.; Šimek, J.; Škuta, J.; Los, J.; Zavadil, J.

    Rotor instability is one of the most serious problems of high-speed rotors supported by sliding bearings. With constantly increasing parameters, new machines problems with rotor instability are encountered more and more often. Even though there are many solutions based on passive improvement of the bearing geometry to enlarge the operational speed range of the journal bearing, the paper deals with a working prototype of a system for the active vibration control of journal bearings with the use of piezoactuators. The actively controlled journal bearing consists of a movable bushing, which is actuated by two piezoactuators. It is assumed that the journal vibration is measured by a pair of proximity probes. Force produced by piezoactuators and acting at the bushing is controlled according to error signals derived from the proximity probe output signals. The active vibration control was tested with the use of a test rig, which consists of a rotor supported by two controllable journal bearings and driven by an inductive motor up to 23,000 rpm. As it was proved by experiments the active vibration control extends considerably the range of the rotor operational speed.

  19. Sudden venting test of an emergency bearing for the magnet bearing type compound molecular pump

    International Nuclear Information System (INIS)

    Hiroki, Seiji; Abe, Tetsuya; Murakami, Yoshio; Okamoto, Masatomo; Iguchi, Masashi; Nakamura, Jyunichi; Nakazeki, Tsugito.

    1995-01-01

    The vacuum evacuation system for nuclear fusion reactors bears the role of exhausting hydrogen isotopes in large quantity together with helium continuously for long hours, and as the high vacuum pumps for this purpose, the mechanical pumps which can do continuous evacuation and decrease the quantity of staying radioactive tritium, such as turbo molecular pumps and compound molecular pumps, are promising. Because of the compatibility with tritium, oil lubrication is not desirable, accordingly, the pumps with ceramic rotating vanes and magnetic bearings are demanded. As a part of the development of a magnetic bearing type mechanical pump which can be used for nuclear fusion reactors, the compound molecular pump, in which emergency bearings were incorporated, was made for trial, and the test of sudden air intrusion was carried out, as the results, various knowledges were obtained. The constitution of the testing setup, and the test results are reported. When air was injected at the pressure rise of 3.3x10 4 Pa/s from exhaust port side, after about 2.5 s, the maximum lift of 4.2x10 3 N arose. When air was injected at the pressure rise of 2.7x10 5 Pa/s from the suction part side, after about 0.4s, the maximum lift of 6.9x10 3 N arose. In the air injection alternately from the suction port and exhaust port sides, the emergency bearings functioned normally in 10 times of the test. (K.I.)

  20. Wear-resistant ball bearings for space applications

    Science.gov (United States)

    Boving, H.; Hintermann, H. E.; Hanni, W.; Bondivenne, E.; Boeto, M.; Conde, E.

    1977-01-01

    Ball bearings consisting of steel parts of which the rings are coated with hard, wear resistant, chemical vapor deposited TiC are described. Experiments conducted in ultrahigh vacuum, using cages of various materials with self-lubricating properties, show that such bearings are suitable for space applications. The results of laboratory tests on the ESA Meteosat Radiometer Focalizing mechanism, which contains six coated bearings, are summarized.

  1. Parent-child interaction: Does parental language matter?

    Science.gov (United States)

    Menashe, Atara; Atzaba-Poria, Naama

    2016-11-01

    Although parental language and behaviour have been widely investigated, few studies have examined their unique and interactive contribution to the parent-child relationship. The current study explores how parental behaviour (sensitivity and non-intrusiveness) and the use of parental language (exploring and control languages) correlate with parent-child dyadic mutuality. Specifically, we investigated the following questions: (1) 'Is parental language associated with parent-child dyadic mutuality above and beyond parental behaviour?' (2) 'Does parental language moderate the links between parental behaviour and the parent-child dyadic mutuality?' (3) 'Do these differences vary between mothers and fathers?' The sample included 65 children (M age  = 1.97 years, SD = 0.86) and their parents. We observed parental behaviour, parent-child dyadic mutuality, and the type of parental language used during videotaped in-home observations. The results indicated that parental language and behaviours are distinct components of the parent-child interaction. Parents who used higher levels of exploring language showed higher levels of parent-child dyadic mutuality, even when accounting for parental behaviour. Use of controlling language, however, was not found to be related to the parent-child dyadic mutuality. Different moderation models were found for mothers and fathers. These results highlight the need to distinguish parental language and behaviour when assessing their contribution to the parent-child relationship. © 2016 The British Psychological Society.

  2. Foot-and-mouth disease in Asiatic black bears (Ursus thibetanus).

    Science.gov (United States)

    Officer, Kirsty; Lan, Nguyen Thi; Wicker, Leanne; Hoa, Nguyen Thi; Weegenaar, Annemarie; Robinson, Jill; Ryoji, Yamaguchi; Loukopoulos, Panayiotis

    2014-09-01

    Foot-and-mouth disease (FMD) is a highly contagious, debilitating, and globally significant viral disease typically affecting cloven-hoofed hosts. The diagnosis of FMD in bears in Vietnam is described. The current study describes a confirmed case of FMD in a bear species, and the clinical signs compatible with FMD in a Malayan sun bear. Thirteen Asiatic black bears (Ursus thibetanus) and 1 Malayan sun bear (Helarctos malayanus) were apparently affected. In August 2011, an adult bear became lethargic, and developed footpad vesicles. Over 15 days, 14 out of 17 bears developed similar signs; the remaining 3 co-housed bears and another 57 resident bears did not. All affected bears developed vesicles on all footpads, and most were lethargic for 24-48 hr. Nasal and oral lesions were noted in 6 and 3 cases, respectively. Within 1 month, all looked normal. Foot-and-mouth disease virus (FMDV) was detected by reverse transcription polymerase chain reaction, classified as serotype O, and isolated by virus isolation techniques. Phylogenetic analysis demonstrated clustering of 3 bear isolates, in a branch distinct from other FMDV type O isolates. The outbreak likely occurred due to indirect contact with livestock, and was facilitated by the high density of captive bears. It showed that Asiatic black bears are capable of contracting FMDV and developing clinical disease, and that the virus spreads easily between bears in close contact. © 2014 The Author(s).

  3. Diet and morphology of extant and recently extinct northern bears

    Science.gov (United States)

    Mattson, David J.

    1998-01-01

    I examined the relationship of diets to skull morphology of extant northern bears and used this information to speculate on diets of the recently extinct cave (Ursus spelaeus) and short-faced (Arctodus simus) bears. Analyses relied upon published skull measurements and food habits of Asiatic (U. thibetanus) and American (U. americanus) black bears, polar bears (U. maritimus), various subspecies of brown bears (U. arctos), and the giant panda (Ailuropoda melanoleuca). Principal components analysis showed major trends in skull morphology related to size, crushing force, and snout shape. Giant pandas, short-faced bears, cave bears, and polar bears exhibited extreme features along these gradients. Diets of brown bears in colder, often non-forested environments were distinguished by large volumes of roots, foliage, and vertebrates, while diets of the 2 black bear species and brown bears occupying broadleaf forests contained greater volumes of mast and invertebrates and overlapped considerably. Fractions of fibrous foods in feces (foliage and roots) were strongly related to skull morphology (R2=0.97)">(R2=0.97). Based on this relationship, feces of cave and short-faced bears were predicted to consist almost wholly of foliage, roots, or both. I hypothesized that cave bears specialized in root grubbing. In contrast, based upon body proportions and features of the ursid digestive tract, I hypothesized that skull features associated with crushing force facilitated a carnivorous rather than herbivorous diet for short-faced bears.

  4. Recent research and development of bearings for helium circulator

    International Nuclear Information System (INIS)

    Taniguchi, S.; Ezaki, Z.; Kawaguchi, K.; Matsumura, N.; Kozima, M.

    1988-01-01

    This paper mainly describes recent studies and successful applications of water lubricated bearing and gas lubricated bearing. Both types of bearing seem to be suitable for a turbo machine installed in an atomic energy plant - such as the helium circulator of a HTGR - not to be affected by radioactivity, so we have been attracted by them for about 10 years. The former was investigated theoretically taking account of turbulent flow due to the low viscosity of water, and compared with the experimental data. Good agreement was obtained, and a successful example applied to a small-sized high speed air compressor is shown. The latter was investigated using a large-sized bearing test rig simulated to an actual machine. The tilting pad journal bearing and the tilting pad thrust bearing were taken and improved for some aspects. These bearings have been taken into service on an actual circulator and are now operating successfully. Currently, a magnetic bearing is being studied to pay special attention to endurance for an earthquake and catcher bearing system. We would like to have an opportunity to present these results in the near future. (author). 5 refs, 15 figs, 2 tabs

  5. Best management practices in counting urban black bears

    OpenAIRE

    Fusaro, Jonathan L.; Conner, Mary M.; Conover, Michael R.; Taylor, Timothy J.; Kenyon, Marc W., Jr.

    2017-01-01

    DNA-based capture-mark-recapture (CMR) techniques are commonly used to obtain population parameters of black bears (Ursus americanus) in rural and wildland landscapes; however, these techniques have not been implemented in urban clusters (i.e., 2,500 to 50,000 residents). Black bears can readily habituate to urban clusters, and wildlife managers need to monitor and manage these urban bear populations. We modified DNAbased CMR for black bear using hair-snares to take into account the small hom...

  6. The R and D D's bearing test benches

    International Nuclear Information System (INIS)

    Vialettes, J.M.

    1997-01-01

    In power generation plants, rotating machines are involved in energy transformation processes and safety systems. The bearings supporting the rotors and the thrust bearings play a crucial role in the reliability of these machines. The phenomena encountered straddle several disciplines: hydrodynamics, tribology, thermomechanics, materials and vibrations in a specific environment, namely: thin fluid film, solid mechanical components and shaft rotation. Means of analysing the behaviour of these components (bearings and thrust bearings) have been developed and implemented. These consists of the EDYOS (Etude Dynamique des Organes de Supportage) code for dynamically studying bearing devices and several related bench tests. In reality, in order to understand the complex physical phenomena encountered in these components, it is vital to carry out analyses and experimental validations. Since these investigations cannot be carried out on actual machines, test benches have been built which can subject the sample bearings to the equivalent stresses. (author)

  7. Interference-Fit Life Factors for Ball Bearings

    Science.gov (United States)

    Oswald, Fred B.; Zaretsky, Erwin V.; Poplawski, Joseph V.

    2010-01-01

    The effect of hoop stresses on the rolling-element fatigue life of angular-contact and deep-groove ball bearings was determined for common inner-ring interference fits at the ABEC-5 tolerance level. The analysis was applied to over 1150 bearing configurations and load cases. Hoop stresses were superimposed on the Hertzian principal stresses created by the applied bearing load to calculate the inner-race maximum shearing stress. The resulting fatigue life of the bearing was recalculated through a series of equations. The reduction in the fatigue life is presented as life factors that are applied to the unfactored bearing life. The life factors found in this study ranged from 1.00 (no life reduction)--where there was no net interface pressure--to a worst case of 0.38 (a 62-percent life reduction). For a given interference fit, the reduction in life is different for angular-contact and deep-groove ball bearings. Interference fits also affect the maximum Hertz stress-life relation. Experimental data of Czyzewski, showing the effect of interference fit on rolling-element fatigue life, were reanalyzed to determine the shear stress-life exponent. The Czyzewski data shear stress-life exponent c equals 8.77, compared with the assumed value of 9. Results are presented as tables and charts of life factors for angular-contact and deep-groove ball bearings with light, normal, and heavy loads and interference fits ranging from extremely light to extremely heavy.

  8. Genetic control of biennial bearing in apple

    Science.gov (United States)

    Guitton, Baptiste; Kelner, Jean-Jacques; Velasco, Riccardo; Gardiner, Susan E.; Chagné, David; Costes, Evelyne

    2012-01-01

    Although flowering in mature fruit trees is recurrent, floral induction can be strongly inhibited by concurrent fruiting, leading to a pattern of irregular fruiting across consecutive years referred to as biennial bearing. The genetic determinants of biennial bearing in apple were investigated using the 114 flowering individuals from an F1 population of 122 genotypes, from a ‘Starkrimson’ (strong biennial bearer)בGranny Smith’ (regular bearer) cross. The number of inflorescences, and the number and the mass of harvested fruit were recorded over 6 years and used to calculate 26 variables and indices quantifying yield, precocity of production, and biennial bearing. Inflorescence traits exhibited the highest genotypic effect, and three quantitative trait loci (QTLs) on linkage group (LG) 4, LG8, and LG10 explained 50% of the phenotypic variability for biennial bearing. Apple orthologues of flowering and hormone-related genes were retrieved from the whole-genome assembly of ‘Golden Delicious’ and their position was compared with QTLs. Four main genomic regions that contain floral integrator genes, meristem identity genes, and gibberellin oxidase genes co-located with QTLs. The results indicated that flowering genes are less likely to be responsible for biennial bearing than hormone-related genes. New hypotheses for the control of biennial bearing emerged from QTL and candidate gene co-locations and suggest the involvement of different physiological processes such as the regulation of flowering genes by hormones. The correlation between tree architecture and biennial bearing is also discussed. PMID:21963613

  9. Polar bear maternity denning in the Beaufort Sea

    Science.gov (United States)

    Amstrup, Steven C.; Gardner, Craig L.

    1994-01-01

    The distribution of polar bears (Ursus maritimus) is circumpolar in the NOrthern Hemisphere, but known locations of maternal dens are concentrated in relatively few, widely scattered locations. Denning is either uncommon or unknown within gaps. To understand effects of industrial development and propose increases in hunting, the temporal and spatial distribution of denning in the Beaufort Sea must be known. We caputred and radiocollared polar bears between 1981 and 1991 and determined tht denning in the Beaufort Sea region was sufficient to account for the estimated population there. Of 90 dend, 48 were on drifting pack ice, 38 on land, and 4 on land-fast ice. The portions of dens on land was higher (P= 0.029) in later compared with earlier years of the study. Bears denning on pack ice drifting as far as 997 km (x=385km) while in dens. there was no difference in cun production by bears denning on land and pack ice (P =0.66). Mean entry and exit dates were 11 November and 5 April for land dens and 22 November and 26 March for pack-ice dens. Female polar bears captured in the Beaufort Sea appeared to be isolated from those caught eat of Cape Bathurst in Canada. Of 35 polar bears that denned along the mainland coast of Alaska and Canada 80% denned between 137 00'W snf 146 59'W. Bears followed to >1 den did not reuse sites and consecutive dens were 20-1,304 km apart. However radio-collared bears are largely faithful to substrate (pack-ice, land, and land-fast ice) and the general geographic area of previous dens. Bears denning on land may be vunerable to human activities such as hunting and industrial development. However, predictable denning chronology and alck of site fidelity indicate that many potential impacts on denning polar bears could be mitigated.

  10. Direct Model Reference Adaptive Control for a Magnetic Bearing

    Energy Technology Data Exchange (ETDEWEB)

    Durling, Mike [Rensselaer Polytechnic Inst., Troy, NY (United States)

    1999-11-01

    A Direct Model Reference Adaptive Controller (DMRAC) is applied to a magnetic bearing test stand. The bearing of interest is the MBC 500 Magnetic Bearing System manufactured by Magnetic Moments, LLC. The bearing model is presented in state space form and the system transfer function is measured directly using a closed-loop swept sine technique. Next, the bearing models are used to design a phase-lead controller, notch filter and then a DMRAC. The controllers are tuned in simulations and finally are implemented using a combination of MATLAB, SIMULINK and dSPACE. The results show a successful implementation of a DMRAC on the magnetic bearing hardware.

  11. Bearing structures

    International Nuclear Information System (INIS)

    Lee, A.S.; Preece, G.E.

    1988-01-01

    A hydrostatic bearing for the lower end of the vertical shaft of a sodium pump comprises a support shell encircling the shaft and a bush located between the shell and shaft. Liquid sodium is fed from the pump outlet to the bush/shaft and bush/shell interfaces to provide hydrostatic support. The bush outer surface and the shell inner surface are of complementary part-spherical shape and the bush floats relative to the shaft so that the bush can align itself with the shaft axis. Monitoring of the relative rotational speed of the bush with respect to the shaft (such rotation being induced by the viscous drag forces present) is also performed for the purposes of detecting abnormal operation of the bearing or partial seizure, at least one magnet is rotatable with the bush, and a magnetic sensor provides an output having a frequency related to the speed of the bush. (author)

  12. Weight bearing or non-weight bearing after surgically fixed ankle fractures, the WOW! Study : study protocol for a randomized controlled trial

    NARCIS (Netherlands)

    Briet, Jan Paul; Houwert, Roderick M; Smeeing, Diederik P J; Pawiroredjo, Janity S; Kelder, Johannes C; Lansink, Koen W; Leenen, Luke P H; van der Zwaal, Peer; van Zutphen, Stephan W A M; Hoogendoorn, Jochem M; van Heijl, Mark; Verleisdonk, Egbert J M M; van Lammeren, Guus W; Segers, Michiel J; Hietbrink, Falco

    2015-01-01

    BACKGROUND: The optimal post-operative care regimen after surgically fixed Lauge Hansen supination exorotation injuries remains to be established. This study compares whether unprotected weight bearing as tolerated is superior to protected weight bearing and unprotected non-weight bearing in terms

  13. The Repercussion of the False Memories Syndrome in the Eyewitness Testimony: an Analysis of Decisions from the Rio Grande do Sul State Court

    Directory of Open Access Journals (Sweden)

    Flaviane Baldasso

    2018-03-01

    Full Text Available False memories are distortions of memory that can impact decisively on the evaluation of a criminal event of interest to the criminal system. Despite the growing interest in the subject, few empirical works have explored the practical consequences of the phenomenon. Along with, the question is if it is possible to measure the repercussion for our criminal proceedings, as well if the theses concerning false memories have been accepted by the Judiciary and in which cases. The present article intends to analyze the repercussion of the phenomenon of false memories, in terms of testimonial evidence, from 437 judgments of the Court of Justice of Rio Grande do Sul. Using the content analysis methodology of Lawrence Bardin, we explored the types of crimes in which the false memories argument has been used, if the hypothesis of this distortion has sensitized the judges, as well as if the analyzes of the judges have been supported in the bibliographical production on the psychology of the testimony. From the numbers raised, it was possible to perceive a considerable increase in the invocation of the argument of the False Memories, but this has not been reversed in the promotion of freedom in the scope of the gaucho penal process.

  14. 46 CFR 61.20-23 - Tailshaft clearance; bearing weardown.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Tailshaft clearance; bearing weardown. 61.20-23 Section...; bearing weardown. (a) Water lubricated bearings, other than rubber, must be rebushed as follows: (1) Where the propelling machinery is located amidship, the after stern tube bearing must be rebushed when it is...

  15. Coefficients of productivity for Yellowstone's grizzly bear habitat

    Science.gov (United States)

    Mattson, David John; Barber, Kim; Maw, Ralene; Renkin, Roy

    2004-01-01

    This report describes methods for calculating coefficients used to depict habitat productivity for grizzly bears in the Yellowstone ecosystem. Calculations based on these coefficients are used in the Yellowstone Grizzly Bear Cumulative Effects Model to map the distribution of habitat productivity and account for the impacts of human facilities. The coefficients of habitat productivity incorporate detailed information that was collected over a 20-year period (1977-96) on the foraging behavior of Yellowstone's bears and include records of what bears were feeding on, when and where they fed, the extent of that feeding activity, and relative measures of the quantity consumed. The coefficients also incorporate information, collected primarily from 1986 to 1992, on the nutrient content of foods that were consumed, their digestibility, characteristic bite sizes, and the energy required to extract and handle each food. Coefficients were calculated for different time periods and different habitat types, specific to different parts of the Yellowstone ecosystem. Stratifications included four seasons of bear activity (spring, estrus, early hyperphagia, late hyperphagia), years when ungulate carrion and whitebark pine seed crops were abundant versus not, areas adjacent to (bear activity in each region, habitat type, and time period were incorporated into calculations, controlling for the effects of proximity to human facilities. The coefficients described in this report and associated estimates of grizzly bear habitat productivity are unique among many efforts to model the conditions of bear habitat because calculations include information on energetics derived from the observed behavior of radio-marked bears.

  16. Bearings for the HFIR control plates

    International Nuclear Information System (INIS)

    Abbatiello, A.A.

    1975-08-01

    Recent accelerated wear of HFIR bearings seems to be a more advanced stage of the situation encountered in 1967. The latest observations are in agreement with the hypothesis that high-frequency impact loads at a 30 0 angle on these bearings are the apparent basic cause of their short life. In view of the limited possibilities for change at this stage of HFIR operation, the region of best payoff seems to be an increase in the load-carrying area at some acceptable sacrifice of low rolling friction. On this basis three types of bearings are proposed for test--two of these are journal types and one is a slider type. The next planned shutdown for major parts replacement provides an opportunity to test these modified bearing types in the HFIR under full mechanical operating conditions but without nuclear operation. The program is recommended for consideration and adoption. (U.S.)

  17. Auxiliary bearing design considerations for gas cooled reactors

    International Nuclear Information System (INIS)

    Penfield, S.R. Jr.; Rodwell, E.

    2001-01-01

    The need to avoid contamination of the primary system, along with other perceived advantages, has led to the selection of electromagnetic bearings (EMBs) in most ongoing commercial-scale gas cooled reactor (GCR) designs. However, one implication of magnetic bearings is the requirement to provide backup support to mitigate the effects of failures or overload conditions. The demands on these auxiliary or 'catcher' bearings have been substantially escalated by the recent development of direct Brayton cycle GCR concepts. Conversely, there has been only limited directed research in the area of auxiliary bearings, particularly for vertically oriented turbomachines. This paper explores the current state-of-the-art for auxiliary bearings and the implications for current GCR designs. (author)

  18. Magnetic bearings promise reduced operation and maintenance costs

    International Nuclear Information System (INIS)

    Jones, G.

    1990-01-01

    Magnetic bearings are being incorporated into the design of the US DoE modular high temperature gas cooled reactor. The virtually maintenance-free bearing technology may have potential in other nuclear applications. In an active magnetic bearing, a stationary electromagnet (stator) and a rotating ferrous material (rotor) are used to allow a shaft to be suspended in a magnetic field. The position of the shaft is maintained dynamically using position sensors to provide a continuous feedback through a control and amplifier system to the electromagnetic poles which are used to suspend the shaft. Two separate systems are required: an axial positioning system, or thrust bearing, and a pair of radial positioning systems, or journal bearings. (author)

  19. Contrasting activity patterns of sympatric and allopatric black and grizzly bears

    Science.gov (United States)

    Schwartz, C.C.; Cain, S.L.; Podruzny, S.; Cherry, S.; Frattaroli, L.

    2010-01-01

    The distribution of grizzly (Ursus arctos) and American black bears (U. americanus) overlaps in western North America. Few studies have detailed activity patterns where the species are sympatric and no studies contrasted patterns where populations are both sympatric and allopatric. We contrasted activity patterns for sympatric black and grizzly bears and for black bears allopatric to grizzly bears, how human influences altered patterns, and rates of grizzlyblack bear predation. Activity patterns differed between black bear populations, with those sympatric to grizzly bears more day-active. Activity patterns of black bears allopatric with grizzly bears were similar to those of female grizzly bears; both were crepuscular and day-active. Male grizzly bears were crepuscular and night-active. Both species were more night-active and less day-active when ???1 km from roads or developments. In our sympatric study area, 2 of 4 black bear mortalities were due to grizzly bear predation. Our results suggested patterns of activity that allowed for intra- and inter-species avoidance. National park management often results in convergence of locally high human densities in quality bear habitat. Our data provide additional understanding into how bears alter their activity patterns in response to other bears and humans and should help park managers minimize undesirable bearhuman encounters when considering needs for temporal and spatial management of humans and human developments in bear habitats. ?? 2010 The Wildlife Society.

  20. Effect of Silicon Nitride Balls and Rollers on Rolling Bearing Life

    Science.gov (United States)

    Zaretsky, Erwin V.; Vlcek, Brian L.; Hendricks, Robert C.

    2005-01-01

    Three decades have passed since the introduction of silicon nitride rollers and balls into conventional rolling-element bearings. For a given applied load, the contact (Hertz) stress in a hybrid bearing will be higher than an all-steel rolling-element bearing. The silicon nitride rolling-element life as well as the lives of the steel races were used to determine the resultant bearing life of both hybrid and all-steel bearings. Life factors were determined and reported for hybrid bearings. Under nominal operating speeds, the resultant calculated lives of the deep-groove, angular-contact, and cylindrical roller hybrid bearings with races made of post-1960 bearing steel increased by factors of 3.7, 3.2, and 5.5, respectively, from those calculated using the Lundberg-Palmgren equations. An all-steel bearing under the same load will have a longer life than the equivalent hybrid bearing under the same conditions. Under these conditions, hybrid bearings are predicted to have a lower fatigue life than all-steel bearings by 58 percent for deep-groove bearings, 41 percent for angular-contact bearings, and 28 percent for cylindrical roller bearings.

  1. Consumption of pondweed rhizomes by Yellowstone grizzly bears

    Science.gov (United States)

    Mattson, D.J.; Podruzny, S.R.; Haroldson, M.A.

    2005-01-01

    Pondweeds (Potamogeton spp.) are common foods of waterfowl throughout the Northern Hemisphere. However, consumption of pondweeds by bears has been noted only once, in Russia. We documented consumption of pondweed rhizomes by grizzly bears (Ursus arctos) in the Yellowstone region, 1977-96, during investigations of telemetry locations obtained from 175 radiomarked bears. We documented pondweed excavations at 25 sites and detected pondweed rhizomes in 18 feces. We observed grizzly bears excavating and consuming pondweed on 2 occasions. All excavations occurred in wetlands that were inundated during and after snowmelt, but dry by late August or early September of most years. These wetlands were typified by the presence of inflated sedge (Carex vesicaria) and occurred almost exclusively on plateaus of Pliocene-Pleistocene detrital sediments or volcanic rhyolite flows. Bears excavated wetlands with pondweeds when they were free of standing water, most commonly during October and occasionally during spring prior to the onset of terminal snowmelt. Most excavations were about 4.5 cm deep, 40 cubic decimeter (dm3) in total volume, and targeted the thickened pondweed rhizomes. Starch content of rhizomes collected near grizzly bear excavations averaged 28% (12% SD; n = 6). These results add to the documented diversity of grizzly bear food habits and, because pondweed is distributed circumboreally, also raise the possibility that consumption of pondweed by grizzly bears has been overlooked in other regions.

  2. Human disturbances of denning polar bears in Alaska

    International Nuclear Information System (INIS)

    Amstrup, S.C.

    1993-01-01

    Polar bears (Ursus maritimus) give birth in dens of snow and ice. The altricial neonates cannot leave the den for >2 months post-partum and are potentially vulnerable to disturbances near dens. The coastal plain (1002) area of Alaska's Arctic National Wildlife Refuge (ANWR) lies in a region of known polar bear denning and also may contain >9 billion barrels of recoverable oil. Polar bears in dens could be affected in many ways by hydrocarbon development. The distribution of dens on ANWR was documented between 1981 and 1992 and responses of bears in dens to various anthropogenic disturbances were observed. Of 44 dens located by radiotelemetry on the mainland coast of Alaska and Canada, 20 (45%) were on ANWR and 15 (34%) were within the 1002 area. Thus, development of ANWR will increase the potential that denning polar bears are disturbed by human activities. However, perturbations resulting from capture, marking, and radiotracking maternal bears did not affect litter sizes or stature of cubs produced. Likewise, 10 of 12 denned polar bears tolerated exposure to exceptional levels of activity. This tolerance and the fact that investment in the denning effort increases through the winter indicated that spatial and temporal restrictions on developments could prevent the potential for many disruptions of denned bears from being realized. 16 refs., 1 fig., 2 tabs

  3. Magnetic bearings for free-piston Stirling engines

    Science.gov (United States)

    Curwen, P. W.; Fleming, D. P.; Rao, D. K.; Wilson, D. S.

    1992-01-01

    The feasibility and efficacy of applying magnetic bearings to free-piston Stirling-cycle power conversion machinery currently being developed for long-term space missions are assessed. The study was performed for a 50-kWe Reference Stirling Space Power Converter (RSSPC) which currently uses hydrostatic gas bearings to support the reciprocating displacer and power piston assemblies. Active magnetic bearings of the attractive electromagnetic type are feasible for the RSSPC power piston. Magnetic support of the displacer assembly would require unacceptable changes to the design of the current RSSPC. However, magnetic suspension of both displacer and power piston is feasible for a relative-displacer version of the RSSPC. Magnetic suspension of the RSSPC power piston can potentially increase overall efficiency by 0.5 to 1 percent (0.1 to 0.3 efficiency points). Magnetic bearings will also overcome several operational concerns associated with hydrostatic gas bearing systems. These advantages, however, are accompanied by a 5 percent increase in specific mass of the RSSPC.

  4. 49 CFR 215.107 - Defective plain bearing box: General.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Defective plain bearing box: General. 215.107... Suspension System § 215.107 Defective plain bearing box: General. A railroad may not place or continue in... the bearing; or (2) Have a detrimental effect on the lubrication of the journal and the bearings. ...

  5. Weight bearing or non-weight bearing after surgically fixed ankle fractures, the WOW! Study : Study protocol for a randomized controlled trial

    NARCIS (Netherlands)

    Briet, Jan Paul; Houwert, Roderick M.; Smeeing, Diederik P. J.; Pawiroredjo, Janity S.; Kelder, Johannes C.; Lansink, Koen W.; Leenen, Luke P. H.; van der Zwaal, Peer; van Zutphen, Stephan W. A. M.; Hoogendoorn, Jochem M.; van Heijl, Mark; Verleisdonk, Egbert J. M. M.; van Lammeren, Guus W.; Segers, Michiel J.; Hietbrink, Falco

    2015-01-01

    Background The optimal post-operative care regimen after surgically fixed Lauge Hansen supination exorotation injuries remains to be established. This study compares whether unprotected weight bearing as tolerated is superior to protected weight bearing and unprotected non-weight bearing in terms of

  6. Evaluation tests of industrial vacuum bearings for space use

    Science.gov (United States)

    Obara, S.; Sasaki, A.; Haraguchi, M.; Imagawa, K.; Nishimura, M.; Kawashima, N.

    2001-09-01

    Tribological performance of industrial vacuum bearings was experimentally evaluated for space use. The bearings selected for investigation were an 8 mm bore-sized deep-groove ball bearing lubricated with a sputtered MoS2 film and that lubricated with an ion-plated Ag film, commercially delivered from three Japanese domestic bearing-manufacturers. Based on survey results of tribological requirements for the existing satellite mechanisms, four types of bearing tests were defined and conducted: a vacuum test at room temperature, an atmosphere-resistant test, a thermal vacuum test and a vibration test. In addition to these tests, variation in tribological performance of the industrial bearings was also investigated. The results of more than eighty tests demonstrated that the industrial vacuum bearings had sufficient lubrication lives with low frictional torque and their data were reasonably repeatable, indicating very good potentiality for space use.

  7. Strength Estimation for Hydrate-Bearing Sediments From Direct Shear Tests of Hydrate-Bearing Sand and Silt

    Science.gov (United States)

    Liu, Zhichao; Dai, Sheng; Ning, Fulong; Peng, Li; Wei, Houzhen; Wei, Changfu

    2018-01-01

    Safe and economic methane gas production, as well as the replacement of methane while sequestering carbon in natural hydrate deposits, requires enhanced geomechanical understanding of the strength and volume responses of hydrate-bearing sediments during shear. This study employs a custom-made apparatus to investigate the mechanical and volumetric behaviors of carbon dioxide hydrate-bearing sediments subjected to direct shear. The results show that both peak and residual strengths increase with increased hydrate saturation and vertical stress. Hydrate contributes mainly the cohesion and dilatancy constraint to the peak strength of hydrate-bearing sediments. The postpeak strength reduction is more evident and brittle in specimens with higher hydrate saturation and under lower stress. Significant strength reduction after shear failure is expected in silty sediments with high hydrate saturation Sh ≥ 0.65. Hydrate contribution to the residual strength is mainly by increasing cohesion at low hydrate saturation and friction at high hydrate saturation. Stress state and hydrate saturation are dominating both the stiffness and the strength of hydrate-bearing sediments; thus, a wave velocity-based peak strength prediction model is proposed and validated, which allows for precise estimation of the shear strength of hydrate-bearing sediments through acoustic logging data. This method is advantageous to geomechanical simulators, particularly when the experimental strength data of natural samples are not available.

  8. GIS representation of coal-bearing areas in Antarctica

    Science.gov (United States)

    Merrill, Matthew D.

    2016-03-11

    Understanding the distribution of coal-bearing geologic units in Antarctica provides information that can be used in sedimentary, geomorphological, paleontological, and climatological studies. This report is a digital compilation of information on Antarctica’s coal-bearing geologic units found in the literature. It is intended to be used in small-scale spatial geographic information system (GIS) investigations and as a visual aid in the discussion of Antarctica’s coal resources or in other coal-based geologic investigations. Instead of using spatially insignificant point markers to represent large coal-bearing areas, this dataset uses polygons to represent actual coal-bearing lithologic units. Specific locations of coal deposits confirmed from the literature are provided in the attribution for the coal-bearing unit polygons. Coal-sample-location data were used to confirm some reported coal-bearing geology. The age and extent of the coal deposits indicated in the literature were checked against geologic maps ranging from local scale at 1:50,000 to Antarctic continental scale at 1:5,000,000; if satisfactory, the map boundaries were used to generate the polygons for the coal-bearing localities.

  9. Interaction of Reinforced Elastomeric Bearings in Bridge Construction

    Directory of Open Access Journals (Sweden)

    Nittmannová Ľubica

    2016-03-01

    Full Text Available The aim of this paper is to demonstrate the behavior of reinforced elastomeric bearings under various loads. They are made of special types of bearings. The experimental verification of these special bearings has been tested on various types of loading. The results of the experimental measurements are compared with the results of the numerical modeling and calculations according to the standard assumptions in STN EN 1337-3. In the conclusion, the results are summarized for the selected types of bearings.

  10. Unmarried parents in college.

    Science.gov (United States)

    Goldrick-Rab, Sara; Sorensen, Kia

    2010-01-01

    Noting that access to higher education has expanded dramatically in the past several decades, Sara Goldrick-Rab and Kia Sorensen focus on how unmarried parents fare once they enter college. Contrary to the expectation that access to college consistently promotes family stability and economic security, the authors argue that deficiencies in current policy lead college attendance to have adverse consequences for some families headed by unmarried parents. Although rates of college attendance have increased substantially among unmarried parents, their college completion rates are low. One explanation is inadequate academic preparation. Another is financial constraints, which can force unmarried students to interrupt their studies or increase their work hours, both of which compromise the quality of their educational experiences and the outcomes for their children. The authors point out that although many public programs offer support to unmarried parents attending college, the support is neither well coordinated nor easily accessed. Over the past three decades, loans have increasingly replaced grants as the most common form of federal and state financial aid. Confusion about what is available leads many low-income students to the two most "straightforward" sources of income--loans and work, both of which involve significant costs and can operate at cross-purposes with public forms of support. Too much work can lead to reductions in public benefits, and earnings do not always replace the lost income. A growing body of experimental evidence shows that providing social, financial, and academic supports to vulnerable community college students can improve achievement and attainment. Contextualized learning programs, for example, have enabled participants not only to move on from basic skills to credit-bearing coursework, but also to complete credits, earn certificates, and make gains on basic skills tests. Another successful initiative provided low-performing students with

  11. On the dynamics of ball bearings

    NARCIS (Netherlands)

    Wensing, J.A.

    1998-01-01

    This investigation on the dynamic behaviour of ball bearings was motivated by the demand for silent bearings in noise-sensitive applications, especially in the household appliance and automotive industry. The present investigations are intended to provide a clear understanding of the role of the

  12. Early weight bearing versus delayed weight bearing in medial opening wedge high tibial osteotomy: a randomized controlled trial.

    Science.gov (United States)

    Lansdaal, Joris Radboud; Mouton, Tanguy; Wascher, Daniel Charles; Demey, Guillaume; Lustig, Sebastien; Neyret, Philippe; Servien, Elvire

    2017-12-01

    The need for a period of non-weight bearing after medial opening wedge high tibial osteotomy remains controversial. It is hypothesized that immediate weight bearing after medial opening wedge high tibial osteotomy would have no difference in functional scores at one year compared to delayed weight bearing. Fifty patients, median age 54 years (range 40-65), with medial compartment osteoarthritis, underwent a medial opening wedge high tibial osteotomy utilizing a locking plate without bone grafting. Patients were randomized into an Immediate or a Delayed (2 months) weight bearing group. All patients were assessed at one-year follow-up and the two groups compared. The primary outcome measure was the IKS score. Secondary outcome measures included the IKDC score, the VAS pain score and rate of complications. The functional scores significantly improved in both groups. The IKS score increased from 142 ± 31 to 171 ± 26 in the Immediate group (p bearing after medial opening wedge high tibial osteotomy had no effect on functional scores at 1 year follow-up and did not significantly increase the complication rate. Immediate weight bearing after medial opening wedge high tibial osteotomy appears to be safe and can allow some patients a quicker return to activities of daily living and a decreased convalescence period. II.

  13. 'Dodo' and 'Baby Bear' Trenches

    Science.gov (United States)

    2008-01-01

    NASA's Phoenix Mars Lander's Surface Stereo Imager took this image on Sol 11 (June 5, 2008), the eleventh day after landing. It shows the trenches dug by Phoenix's Robotic Arm. The trench on the left is informally called 'Dodo' and was dug as a test. The trench on the right is informally called 'Baby Bear.' The sample dug from Baby Bear will be delivered to the Phoenix's Thermal and Evolved-Gas Analyzer, or TEGA. The Baby Bear trench is 9 centimeters (3.1 inches) wide and 4 centimeters (1.6 inches) deep. The Phoenix Mission is led by the University of Arizona, Tucson, on behalf of NASA. Project management of the mission is by NASA's Jet Propulsion Laboratory, Pasadena, Calif. Spacecraft development is by Lockheed Martin Space Systems, Denver.

  14. Parent and adolescent reports of parenting when a parent has a history of depression: associations with observations of parenting.

    Science.gov (United States)

    Parent, Justin; Forehand, Rex; Dunbar, Jennifer P; Watson, Kelly H; Reising, Michelle M; Seehuus, Martin; Compas, Bruce E

    2014-02-01

    The current study examined the congruence of parent and adolescent reports of positive and negative parenting with observations of parent-adolescent interactions as the criterion measure. The role of parent and adolescent depressive symptoms in moderating the associations between adolescent or parent report and observations of parenting also was examined. Participants were 180 parents (88.9 % female) with a history of clinical depression and one of their 9-to-15 year old children (49.4 % female). Parents and adolescents reported on parenting skills and depressive symptoms, and parenting was independently observed subsequently in the same session. Findings indicated adolescent report of positive, but not negative, parenting was more congruent with observations than parent report. For negative parenting, depressive symptoms qualified the relation between the parent or adolescent report and independent observations. For parents, higher levels of depressive symptoms were associated with more congruence with observed parenting (supporting a depressive realism hypothesis) whereas an opposite trend emerged for adolescents (providing some supporting evidence for a depression-distortion hypothesis).

  15. Italy Seen Through the Eyes of Anselmo Adorno. A Testimony of the Middle Ages

    Directory of Open Access Journals (Sweden)

    Beatrice Borghi

    2017-12-01

    Full Text Available Anselmo Adorno was one of the most prominent and influential men of Western Europe in the late Middle Ages in the area between Flanders, the Duchy of Burgundy and Scotland. Negotiator, wise, magistrate, Anselmo left us the journey report Itinerarium Terrae Sanctae Anselmi Adorni, written by his son Giovanni, a source of extraordinary wealth for the details and descriptions of places, customs and customs of the peoples of the eastern Mediterranean. Of particular interest is also the description of the cities, the urban and rural landscape, the routes that Adorno travelled in his journey between 1470 and 1471. The article will therefore take the moves from this precious testimony to describe the Italy visited by the pilgrim of Bruges, including Genoa, a family town of Rome, Brindisi and the Apulian cities of Naples, and the route that from the eternal city led to Venice, Cologne and finally to the West Flanders.

  16. (Imposibilidades del sujeto testimonial: aproximaciones interdisciplinarias a la memoria de lo traumático

    Directory of Open Access Journals (Sweden)

    José Cabrera

    Full Text Available Resumen Este artículo tiene como objetivo general promover la reflexión interdisciplinaria, considerando aportes del psicoanálisis y de la historia, acerca de la transmisión de la memoria, en sus dimensiones individuales y colectivas, de acontecimientos traumáticos vinculados a la transgresión de los derechos humanos en el contexto de regímenes autoritarios, desde la perspectiva del sujeto del testimonio. El principal supuesto es que el sujeto testimonial configura discursos que articulan tanto dimensiones representables como irrepresentables de la experiencia mediante la palabra. Así, interesa preguntarse por la posibilidad de que el testimonio presente en su propia organización discursiva esta dimensión que se resiste a la articulación narrativa, cuestión que permite considerar la forma y la función que adquiere lo irrepresentable en los procesos de transmisión de la memoria histórica ligada a los traumas colectivos.

  17. VALIDITY AND CREDIBILITY OF A CHILD’S TESTIMONY OF SEXUAL ABUSE: A CASE REPORT

    Directory of Open Access Journals (Sweden)

    Antonina Argo

    2012-03-01

    Full Text Available The allegation by a child victim of sexual abuse is, in many cases, the most important evidence of wrongdoing, especially in absence of medical or physical evidence or confessions of guilt. The Rorschach inkblot test is a projective personality assessment technique used to evaluate child witnesses. We report a case of three girls allegedly abused by the father, in which the psychometric evaluation with the Rorschach test did not give credibility to the testimony of the children. When interrogating a minor, it is very difficult to distinguish between a true and a lie. Indeed, many different elements can affect the dialogue, such as the child’s age, the events being discussed, interrogation environment, factors linked to the interviewer, etc. Therefore, it is possible errors of evaluation, misunderstandings or confusion happen frequently. The aim of this case report is to highlight that employment of methodologies and criteria recognised by the scientific community could simplify the acquisition and assessment of information from a minor.

  18. Consumption choice by bears feeding on salmon.

    Science.gov (United States)

    Gende, S M; Quinn, T P; Willson, M F

    2001-05-01

    Consumption choice by brown (Ursus arctos) and black bears (U. americanus) feeding on salmon was recorded for over 20,000 bear-killed fish from 1994 to 1999 in Bristol Bay (sockeye salmon, Oncorhynchus nerka) and southeastern Alaska (pink, O. gorbuscha and chum salmon O. keta). These data revealed striking patterns of partial and selective consumption that varied with relative availability and attributes of the fish. As the availability of salmon decreased, bears consumed a larger proportion of each fish among both years and habitats. When availability was high (absolute number and density of salmon), bears consumed less biomass per captured fish, targeting energy-rich fish (those that had not spawned) or energy-rich body parts (eggs in females; brain in males). In contrast, individual fish were consumed to a much greater extent, regardless of sex or spawning status, in habitats or years of low salmon availability. The proportion of biomass consumed per fish was similar for males and females, when spawning status was statistically controlled, but bears targeted different body parts: the body flesh, brain and dorsal hump in males and the roe in females. Bears thus appeared to maximize energy intake by modifying the amount and body parts consumed, based on availability and attributes of spawning salmon.

  19. Adaptive Spindle Balancing Using Magnetically Levitated Bearings

    International Nuclear Information System (INIS)

    BARNEY, PATRICK S.; LAUFFER, JAMES P.; PETTEYS, REBECCA; REDMOND, JAMES M.; SULLIVAN, WILLIAM N.

    1999-01-01

    A technological break through for supporting rotating shafts is the active magnetic bearing (AMB). Active magnetic bearings offer some important advantages over conventional ball, roller or journal bearings such as reduced frictional drag, no physical contact in the bearing, no need for lubricants, compatibility with high vacuum and ultra-clean environments, and ability to control shaft position within the bearing. The disadvantages of the AMB system are the increased cost and complexity, reduced bearing stiffness and the need for a controller. Still, there are certain applications, such as high speed machining, biomedical devices, and gyroscopes, where the additional cost of an AMB system can be justified. The inherent actuator capabilities of the AMB offer the potential for active balancing of spindles and micro-shaping capabilities for machine tools, The work presented in this paper concentrates on an AMB test program that utilizes the actuator capability to dynamically balance a spindle. In this study, an unbalanced AMB spindle system was enhanced with an LMS (Least Mean Squares) algorithm combined with an existing PID (proportional, integral, differential) control. This enhanced controller significantly improved the concentricity of an intentionally unbalanced shaft. The study included dynamic system analysis, test validation, control design and simulation, as well as experimental implementation using a digital LMS controller

  20. Diet and Macronutrient Optimization in Wild Ursids: A Comparison of Grizzly Bears with Sympatric and Allopatric Black Bears.

    Directory of Open Access Journals (Sweden)

    Cecily M Costello

    Full Text Available When fed ad libitum, ursids can maximize mass gain by selecting mixed diets wherein protein provides 17 ± 4% of digestible energy, relative to carbohydrates or lipids. In the wild, this ability is likely constrained by seasonal food availability, limits of intake rate as body size increases, and competition. By visiting locations of 37 individuals during 274 bear-days, we documented foods consumed by grizzly (Ursus arctos and black bears (Ursus americanus in Grand Teton National Park during 2004-2006. Based on published nutritional data, we estimated foods and macronutrients as percentages of daily energy intake. Using principal components and cluster analyses, we identified 14 daily diet types. Only 4 diets, accounting for 21% of days, provided protein levels within the optimal range. Nine diets (75% of days led to over-consumption of protein, and 1 diet (3% of days led to under-consumption. Highest protein levels were associated with animal matter (i.e., insects, vertebrates, which accounted for 46-47% of daily energy for both species. As predicted: 1 daily diets dominated by high-energy vertebrates were positively associated with grizzly bears and mean percent protein intake was positively associated with body mass; 2 diets dominated by low-protein fruits were positively associated with smaller-bodied black bears; and 3 mean protein was highest during spring, when high-energy plant foods were scarce, however it was also higher than optimal during summer and fall. Contrary to our prediction: 4 allopatric black bears did not exhibit food selection for high-energy foods similar to grizzly bears. Although optimal gain of body mass was typically constrained, bears usually opted for the energetically superior trade-off of consuming high-energy, high-protein foods. Given protein digestion efficiency similar to obligate carnivores, this choice likely supported mass gain, consistent with studies showing monthly increases in percent body fat among

  1. Diet and macronutrient optimization in wild ursids: A comparison of grizzly bears with sympatric and allopatric black bears

    Science.gov (United States)

    Costello, Cecily M.; Cain, Steven L.; Pils, Shannon R; Frattaroli, Leslie; Haroldson, Mark A.; van Manen, Frank T.

    2016-01-01

    When fed ad libitum, ursids can maximize mass gain by selecting mixed diets wherein protein provides 17 ± 4% of digestible energy, relative to carbohydrates or lipids. In the wild, this ability is likely constrained by seasonal food availability, limits of intake rate as body size increases, and competition. By visiting locations of 37 individuals during 274 bear-days, we documented foods consumed by grizzly (Ursus arctos) and black bears (Ursus americanus) in Grand Teton National Park during 2004–2006. Based on published nutritional data, we estimated foods and macronutrients as percentages of daily energy intake. Using principal components and cluster analyses, we identified 14 daily diet types. Only 4 diets, accounting for 21% of days, provided protein levels within the optimal range. Nine diets (75% of days) led to over-consumption of protein, and 1 diet (3% of days) led to under-consumption. Highest protein levels were associated with animal matter (i.e., insects, vertebrates), which accounted for 46–47% of daily energy for both species. As predicted: 1) daily diets dominated by high-energy vertebrates were positively associated with grizzly bears and mean percent protein intake was positively associated with body mass; 2) diets dominated by low-protein fruits were positively associated with smaller-bodied black bears; and 3) mean protein was highest during spring, when high-energy plant foods were scarce, however it was also higher than optimal during summer and fall. Contrary to our prediction: 4) allopatric black bears did not exhibit food selection for high-energy foods similar to grizzly bears. Although optimal gain of body mass was typically constrained, bears usually opted for the energetically superior trade-off of consuming high-energy, high-protein foods. Given protein digestion efficiency similar to obligate carnivores, this choice likely supported mass gain, consistent with studies showing monthly increases in percent body fat among bears in

  2. Expectations of emotions during testimony: the role of communicator and perceiver characteristics.

    Science.gov (United States)

    Bederian-Gardner, Daniel; Goldfarb, Deborah

    2014-01-01

    This study investigated the influence of communicator (child victim) and perceiver (adult participant) characteristics on expectations about witnesses' emotional displays during testimony. In total, 191 adults were asked whether or not they expected child victims who were testifying about sexual abuse to display sadness, fear, anger, disgust, happiness, or a neutral demeanor, and how intensely the adults expected each emotion to be displayed. In describing the victims, child age (5 vs. 13 years old) and child gender (female vs. male) were factorially combined as within-subject factors. Results included that victim gender predicted expectations of fear, and victim age predicted expectations of anger and disgust. There was a significant interaction of victim age and victim gender for expectations of sadness. Of participants who expected multiple emotions, a combination of negative and neutral emotions was expected more from 13-year-old female victims than from 5-year-old female victims. Child victim empathy predicted ratings of how intensely sad and fearful the child victim would look. Implications of these findings for psychological research and the legal system are discussed. Copyright © 2014 John Wiley & Sons, Ltd.

  3. Parents and Daughters in Two Novels by Arab American Authors: “Khalas, Let Her Go”

    Directory of Open Access Journals (Sweden)

    Ismet Bujupaj

    2016-12-01

    Full Text Available Multiple intersecting pressures bear upon immigrant parent-child, and especially immigrant mother-daughter relationships depicted in Randa Jarrar’s novel, A Map of Home, and Mohja Kahf ’s novel, The Girl in the Tangerine Scarf. Each of these novels is a Bildungsroman story, the protagonist of each being a budding artist. As the growing daughters struggle toward autonomy and parents react from complex pressures upon them, the reader gains insight on the interconnected structural and psychological factors in the intergenerational dynamics these novels portray, often with humor. The personal psychological history of the parents, as well as their displacement through immigration, in addition to anti-Arab racism in their U.S. settings and how each of these factors relates also to gender, complicate the parents’ relationships with their daughters. Through a close reading informed by postcolonial and psychological approaches, this article argues that these novels do not depict only one category of oppression but also offer multiple layers of critique.

  4. Parental investment matters for maternal and offspring immune defense in the mouthbrooding cichlid Astatotilapia burtoni.

    Science.gov (United States)

    Keller, Isabel S; Salzburger, Walter; Roth, Olivia

    2017-12-20

    Parental care, while increasing parental fitness through offspring survival, also bears cost to the care-giving parent. Consequentially, trade offs between parental care and other vitally important traits, such as the immune system seem evident. In co-occurring phases of parental care and immunological challenges negative consequences through a resource allocation trade off on both the parental and the offspring conditions can be predicted. While the immune system reflects parental stress conditions, parental immunological investments also boost offspring survival via the transfer of immunological substances (trans-generational immune priming). We investigated this relationship in the mouthbrooding East African cichlid Astotatilapia burtoni. Prior to mating, females were exposed to an immunological activation, while others remained immunologically naïve. Correspondingly, the immunological status of females was either examined directly after reproduction or after mouthbrooding had ceased. Offspring from both groups were exposed to immunological challenges to assess the extent of trans-generational immune priming. As proxy for immune status, cellular immunological activity and gene expression were determined. Both reproducing and mouthbrooding females allocate their resources towards reproduction. While upon reproduction the innate immune system was impeded, mouthbrooding females showed an attenuation of inflammatory components. Juveniles from immune challenged mouthbrooding females showed downregulation of immune and life history candidate genes, implying a limitation of trans-generational plasticity when parents experience stress during the costly reproductive phase. Our results provide evidence that both parental investment via mouthbrooding and the rise of the immunological activity upon an immune challenge are costly traits. If applied simultaneously, not only mothers seem to be impacted in their performance, but also offspring are impeded in their ability to

  5. Parents of children with enduring epilepsy: predictors of parenting stress and parenting

    NARCIS (Netherlands)

    Rodenburg, R.; Meijer, A.M.; Dekovic, M.; Aldenkamp, A.P.

    2007-01-01

    Objective: The goals of the work described here were (1) to predict parenting stress and parenting from stressors, resources, and parental coping behaviors in parents of children with epilepsy, and (2) to determine whether parenting stress mediates the effects of these predictors on parenting.

  6. Parents of children with enduring epilepsy: predictors of parenting stress and parenting.

    NARCIS (Netherlands)

    Rodenburg, R.J.T.; Meijer, A.M.; Dekovic, M.; Aldenkamp, A.P.

    2007-01-01

    OBJECTIVE: The goals of the work described here were (1) to predict parenting stress and parenting from stressors, resources, and parental coping behaviors in parents of children with epilepsy, and (2) to determine whether parenting stress mediates the effects of these predictors on parenting.

  7. KINEMATICS AND DYNAMICS MODELS OF CYLINDRICAL ROLLER BEARING OF RAILWAY TRANSPORT

    Directory of Open Access Journals (Sweden)

    A. V. Gaydamaka

    2014-05-01

    Full Text Available Purpose. Lack of kinematics models and imperfection of the known dynamics models of the roller bearings of railway rolling stock axle-boxes do not allow designing the optimal structure of bearing cages, providing the required service life and reliability of bearing units of wheel sets for cars and locomotives. The studies of kinematics and dynamics of roller bearings of axle boxes for cars and locomotives and modeling of their parts interaction to create the analytical method of bearing cages calculation are necessary. Methodology. This purpose has been achieved due to the modeling of kinematics of the ideal (without gaps and real (taking account the gaps, manufacturing and installation errors bearings, substantiation of the transfer mechanism of motion from the rollers to bearing cage, modeling the dynamics of rolling, research of interaction forces of the rollers with bearing cage. Findings. It is established that the kinematics of ideal bearing is determined by the contact deformations of the rollers and rings, when the kinematics of real bearing depends mainly on the side gaps in the windows of the bearing cage. On the basis of studies of the real bearing kinematics the dynamics models of the rollers and bearing cage interaction were constructed. The conducted studies of kinematics and dynamics of rolling bearings have changed our view of them as of the planetary mechanism, explained the reason of bearing cage loading, and confirmed the possibility of destruction during operation. Originality. It was first proposed a mechanism for motion transfer from the rollers to the bearing cage of roller bearings, consisting in that the side gap in the bearing cage window is reduced gradually multiple of the number of rollers of radial loading area according to the bearing cage motion. The models of roller bearing dynamics, which allow calculating the interaction forces of parts for all modes of operation, were improved. Practical value. Use of the

  8. Foil Bearing Coating Behavior in CO2

    Energy Technology Data Exchange (ETDEWEB)

    Walker, Matthew [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Kruizenga, Alan Michael [Sandia National Lab. (SNL-CA), Livermore, CA (United States); Pasch, James Jay [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Fleming, Darryn [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-08-01

    The Sandia S-CO2 Recompression Closed Brayton Cycle (RCBC) utilizes a series of gas foil bearings in its turbine-alternator-compressors. At high shaft rotational speed these bearings allow the shaft to ride on a cushion of air. Conversely, during startup and shutdown, the shaft rides along the foil bearing surface. Low-friction coatings are used on bearing surfaces in order to facilitate rotation during these periods. An experimental program was initiated to elucidate the behavior of coated bearing foils in the harsh environments of this system. A test configuration was developed enabling long duration exposure tests, followed by a range of analyses relevant to their performance in a bearing. This report provides a detailed overview of this work. The results contained herein provide valuable information in selecting appropriate coatings for more advanced future bearing-rig tests at the newly established test facility in Sandia-NM.

  9. Spotted hyena and steppe lion predation behaviours on cave bears of Europe - ?Late Quaternary cave bear extinction as result of predator stress

    Science.gov (United States)

    Diedrich, Cajus G.

    2010-05-01

    Cave bears hibernated in caves all over Eurasia (e.g. Rabeder et al., 2000) including alpine regions using mainly larger caves for this purpose. Late Quaternary spotted hyenas Crocuta crocuta spelaea instead occupied mainly areas close to the cave entrances as their dens (Diedrich and Žák 2006, Diedrich 2010). The largest predator, the steppe lion Panthera leo spelaea was only a sporadic cave dweller (Diedrich 2007b, 2009b). His presence and its remains from caves all over Europe can be recently explained best as result of imported carcasses after killing by their largest antagonists, the Late Quaternary spotted hyenas. In some cases the kill might have happened in the hyena den cave itself during the theft of prey remains by lions (Diedrich 2009a). Another reason of their remains in caves of Europe is the hunting onto the herbivorous cave bears, especially during hibernation times, when megafauna prey was less available in the open environments (Diedrich 2009c). These lion remains from caves of Europe, nearly all of which were from adult animals, provide evidence of active predation by lions onto cave bears even in medium high alpine regions (Diedrich 2009b, in review). Lion skeletons in European cave bear dens were therefore often found amongst originally articulated cave bear skeletons or scattered cave bear remains and even close to their hibernation nests (Diedrich et al. 2009c, in review). Not only lions fed on cave bears documented mainly by the large quantities of chewed, punctured and crushed cave bear long-bones; even damaged skulls reveal that hyenas scavenged primarily on cave bear carcasses which were mainly responsible for the destruction of their carcasses and bones (Diedrich 2005, 2009d). Predation and scavenging on cave bears by the two largest Late Quaternary predators C. c. spelaea and P. l. spelaea explains well the large quantity of fragmented cave bear bones over all European caves in low to medium high mountainous elevations, whereas in

  10. Hydrodynamic bearings

    CERN Document Server

    Bonneau, Dominique; Souchet, Dominique

    2014-01-01

    This Series provides the necessary elements to the development and validation of numerical prediction models for hydrodynamic bearings. This book describes the rheological models and the equations of lubrication. It also presents the numerical approaches used to solve the above equations by finite differences, finite volumes and finite elements methods.

  11. Parent and Adolescent Reports of Parenting When a Parent Has a History of Depression: Associations with Observations of Parenting

    Science.gov (United States)

    Parent, Justin; Forehand, Rex; Dunbar, Jennifer P.; Watson, Kelly H.; Reising, Michelle M.; Seehuus, Martin; Compas, Bruce E.

    2013-01-01

    The current study examined the congruence of parent and adolescent reports of positive and negative parenting with observations of parent-adolescent interactions as the criterion measure. The role of parent and adolescent depressive symptoms in moderating the associations between adolescent or parent report and observations of parenting also was examined. Participants were 180 parents (88.9% female) with a history of clinical depression and one of their 9-to-15 year old children (49.4% female). Parents and adolescents reported on parenting skills and depressive symptoms, and parenting was independently observed subsequently in the same session. Findings indicated adolescent report of positive, but not negative, parenting was more congruent with observations than parent report. For negative parenting, depressive symptoms qualified the relation between the parent or adolescent report and independent observations. For parents, higher levels of depressive symptoms were associated with more congruence with observed parenting (supporting a depressive realism hypothesis) whereas an opposite trend emerged for adolescents (providing some supporting evidence for a depression-distortion hypothesis). PMID:23851629

  12. Friction coefficients of PTFE bearing liner

    Science.gov (United States)

    Daniels, C. M.

    1979-01-01

    Data discusses frictional characteristics of PTFE (polytetrafluoroethylene) under temperature extremes and in vacuum environment. Tests were also run on reduced scale hardware to determine effects of vacuum. Data is used as reference by designers of aircraft-control system rod-end bearings and for bearings used in polar regions.

  13. 33 CFR 117.543 - Bear Creek.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Bear Creek. 117.543 Section 117.543 Navigation and Navigable Waters COAST GUARD, DEPARTMENT OF HOMELAND SECURITY BRIDGES DRAWBRIDGE OPERATION REGULATIONS Specific Requirements Maryland § 117.543 Bear Creek. (a) The draws of the Baltimore...

  14. Response of Yellowstone grizzly bears to changes in food resources: A synthesis. Final report to the Interagency Grizzly Bear Committee and Yellowstone Ecosystem Subcommittee

    Science.gov (United States)

    ,; van Manen, Frank T.; Costello, Cecily M.; Haroldson, Mark A.; Bjornlie, Daniel D.; Ebinger, Michael R.; Gunther, Kerry A.; Mahalovich, Mary Frances; Thompson, Daniel J.; Higgs, Megan D.; Irvine, Kathryn M.; Legg, Kristin; Tyers, Daniel B.; Landenburger, Lisa; Cain, Steven L.; Frey, Kevin L.; Aber, Bryan C.; Schwartz, Charles C.

    2013-01-01

    The Yellowstone grizzly bear (Ursus arctos) was listed as a threatened species in 1975 (Federal Register 40 FR:31734-31736). Since listing, recovery efforts have focused on increasing population size, improving habitat security, managing bear mortalities, and reducing bear-human conflicts. The Interagency Grizzly Bear Committee (IGBC; partnership of federal and state agencies responsible for grizzly bear recovery in the lower 48 states) and its Yellowstone Ecosystem Subcommitte (YES; federal, state, county, and tribal partners charged with recovery of grizzly bears in the Greater Yelowston Ecosystem [GYE]) tasked the Interagency Grizzly Bear Study Team to provide information and further research relevant to three concerns arising from the 9th Circuit Court of Appeals November 2011 decision: 1) the ability of grizzly bears as omnivores to find alternative foods to whitebark pine seeds; 2) literature to support their conclusions; and 3) the non-intuitive biological reality that impacts can occur to individuals without causing the overall population to decline. Specifically, the IGBC and YES requested a comprehensive synthesis of the current state of knowledge regarding whitebark pinbe decline and individual and population-level responses of grizzly bears to changing food resources in the GYE. This research was particularly relevant to grizzly bear conservation given changes in the population trajectory observed during the last decade.

  15. Gearbox Instrumentation for the Investigation of Bearing Axial Cracking

    Energy Technology Data Exchange (ETDEWEB)

    Keller, Jonathan A [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Lambert, Scott R [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2018-03-27

    Failures in gearbox bearings have been the primary source of reliability issues for wind turbine drivetrains, leading to costly downtime and unplanned maintenance. The most common failure mode is attributed to so-called axial cracks or white-etching cracks, which primarily affect the intermediate and high-speed-stage bearings. The high-speed-shaft and bearing loads and sliding will be measured with a specially instrumented gearbox installed in a 1.5-megawatt turbine at the National Wind Technology Center in an upcoming test campaign. Additional instrumentation will also measure the tribological environment of these bearings, including bearing temperatures, lubricant temperature and water content, air temperature and humidity, and stray electrical current across the bearings. This paper fully describes the instrumentation package and summarizes initial results.

  16. Gearbox Reliability Collaborative Gearbox 3 Planet Bearing Calibration

    Energy Technology Data Exchange (ETDEWEB)

    Keller, Jonathan [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2017-03-24

    The Gearbox Reliability Collaborative gearbox was redesigned to improve its load-sharing characteristics and predicted fatigue life. The most important aspect of the redesign was to replace the cylindrical roller bearings with preloaded tapered roller bearings in the planetary section. Similar to previous work, the strain gages installed on the planet tapered roller bearings were calibrated in a load frame. This report describes the calibration tests and provides the factors necessary to convert the measured units from dynamometer testing to bearing loads, suitable for comparison to engineering models.

  17. The development of cobalt-base alloy ball bearing

    International Nuclear Information System (INIS)

    Yu Xinshui; Chen Jianting; Wang Zaishu; Wang Ximei; Huang Chongming.

    1986-01-01

    The main technologies and experiences in developing a Cobalt-base alloy ball bearing are described. In the hardfacing of bearing races, a lower-hardness alloy of type St-6 is used rather than an alloy with hardness similar to that of the ball and finally the hardness of race is increased to match that of the ball by heat treatment. This improvement has certain advantages. The experience of whole developing technology indicates that strict control of the technology in the bearing-race hardfacing is the key problem in the quality assurance of bearings

  18. Comment on "Nuclear genomic sequences reveal that polar bears are an old and distinct bear lineage".

    Science.gov (United States)

    Nakagome, Shigeki; Mano, Shuhei; Hasegawa, Masami

    2013-03-29

    Based on nuclear and mitochondrial DNA, Hailer et al. (Reports, 20 April 2012, p. 344) suggested early divergence of polar bears from a common ancestor with brown bears and subsequent introgression. Our population genetic analysis that traces each of the genealogies in the independent nuclear loci does not support the evolutionary model proposed by the authors.

  19. Parental Monitoring, Parent-Adolescent Communication, and Adolescents' Trust in Their Parents in China.

    Directory of Open Access Journals (Sweden)

    Liuhua Ying

    Full Text Available Trust is an important aspect of interpersonal relationships, but little is known about adolescents' interpersonal trust. The aim of the present study was to examine the associations among parental monitoring, parent-adolescent communication, and adolescents' trust in their parents in China.Data in this study were collected as part of the cross-sectional study of children in China. 3349 adolescents (female 48.6%, age range of 12-15 years were randomly selected from 35 secondary schools in April, 2009 and administered to the Adolescent Interpersonal Trust Scale, the Parental Monitoring Scale, and the Parent-Adolescent Communication Scale.Adolescents' trust in their parents was positively related to parental monitoring and parent-adolescent communication. Furthermore, parent-adolescent communication mediated the association between parental monitoring and adolescents' trust in their parents. The mediation model fit data of both genders and three age groups equally well.Parental monitoring and parent-adolescent communication play an importance role in fostering adolescents' trust in their parents.

  20. Performance of an active electric bearing for rotary micromotors

    International Nuclear Information System (INIS)

    Han, F T; Wang, L; Wu, Q P; Liu, Y F

    2011-01-01

    An electric bearing used to support a micromachined rotor of variable-capacitance motors was designed and tested in order to study the characteristics of this frictionless bearing. Electrostatic suspension of a ring-shaped rotor in five degrees of freedom is required to eliminate the mechanical bearing and thus the friction and wear between the rotor and the substrate. Bulk microfabrication-based glass/silicon/glass bonding is chosen for this device, allowing the fabrication of large area sense capacitors and rotor, which make the device potentially suitable for the development of an electrostatically suspended micromachined gyroscope. The device and its basic operating principle are described, as well as the dynamics of the rotor and basic design considerations of the electric bearing system. A theoretical relationship to relate the characteristics of a classical lag–lead compensator to the stiffness properties of the electric bearing is developed to explain the experimental bearing measurements. The experimental results of closed-loop frequency response, suspension stiffness and drive voltage effects are presented and discussed for the bearing operated initially in the atmospheric environment. The performance of a tri-axial electrostatic accelerometer has also been experimentally investigated on the prototype of the electric bearing system

  1. A Parent-to-Parent Program in Taiwan

    Science.gov (United States)

    Liu, Kae

    2018-01-01

    Parent-to-parent programs provide emotional and informational support to parents of children with special needs by matching trained and experienced parents with parents needing support. This study examined the implementation and effects of a Parent-to-Parent Program in Taiwan that supported 3 families of youngsters with special needs. Based on the…

  2. Modeling of dynamically loaded hydrodynamic bearings at low Sommerfeld numbers

    DEFF Research Database (Denmark)

    Thomsen, Kim

    Current state of the art within the wind industry dictates the use of conventional rolling element bearings for main bearings. As wind turbine generators increase in size and output, so does the size of the main bearings and accordingly also the cost and potential risk of failure modes. The cost...... and failure risk of rolling element bearings do, however, grow exponentially with the size. Therefore hydrodynamic bearings can prove to be a competitive alternative to the current practice of rolling element bearings and ultimately help reducing the cost and carbon footprint of renewable energy generation....... The challenging main bearing operation conditions in a wind turbine pose a demanding development task for the design of a hydrodynamic bearing. In general these conditions include operation at low Reynolds numbers with frequent start and stop at high loads as well as difficult operating conditions dictated...

  3. DC Control Effort Minimized for Magnetic-Bearing-Supported Shaft

    Science.gov (United States)

    Brown, Gerald V.

    2001-01-01

    A magnetic-bearing-supported shaft may have a number of concentricity and alignment problems. One of these involves the relationship of the position sensors, the centerline of the backup bearings, and the magnetic center of the magnetic bearings. For magnetic bearings with permanent magnet biasing, the average control current for a given control axis that is not bearing the shaft weight will be minimized if the shaft is centered, on average over a revolution, at the magnetic center of the bearings. That position may not yield zero sensor output or center the shaft in the backup bearing clearance. The desired shaft position that gives zero average current can be achieved if a simple additional term is added to the control law. Suppose that the instantaneous control currents from each bearing are available from measurements and can be input into the control computer. If each control current is integrated with a very small rate of accumulation and the result is added to the control output, the shaft will gradually move to a position where the control current averages to zero over many revolutions. This will occur regardless of any offsets of the position sensor inputs. At that position, the average control effort is minimized in comparison to other possible locations of the shaft. Nonlinearities of the magnetic bearing are minimized at that location as well.

  4. Thermohydrodynamic analysis of cryogenic liquid turbulent flow fluid film bearings

    Science.gov (United States)

    Andres, Luis San

    1993-01-01

    A thermohydrodynamic analysis is presented and a computer code developed for prediction of the static and dynamic force response of hydrostatic journal bearings (HJB's), annular seals or damper bearing seals, and fixed arc pad bearings for cryogenic liquid applications. The study includes the most important flow characteristics found in cryogenic fluid film bearings such as flow turbulence, fluid inertia, liquid compressibility and thermal effects. The analysis and computational model devised allow the determination of the flow field in cryogenic fluid film bearings along with the dynamic force coefficients for rotor-bearing stability analysis.

  5. Bear-baiting may exacerbate wolf-hunting dog conflict.

    Science.gov (United States)

    Bump, Joseph K; Murawski, Chelsea M; Kartano, Linda M; Beyer, Dean E; Roell, Brian J

    2013-01-01

    The influence of policy on the incidence of human-wildlife conflict can be complex and not entirely anticipated. Policies for managing bear hunter success and depredation on hunting dogs by wolves represent an important case because with increasing wolves, depredations are expected to increase. This case is challenging because compensation for wolf depredation on hunting dogs as compared to livestock is less common and more likely to be opposed. Therefore, actions that minimize the likelihood of such conflicts are a conservation need. We used data from two US states with similar wolf populations but markedly different wolf/hunting dog depredation patterns to examine the influence of bear hunting regulations, bear hunter to wolf ratios, hunter method, and hunter effort on wolf depredation trends. Results indicated that the ratio of bear hunting permits sold per wolf, and hunter method are important factors affecting wolf depredation trends in the Upper Great Lakes region, but strong differences exist between Michigan and Wisconsin related in part to the timing and duration of bear-baiting (i.e., free feeding). The probability that a wolf depredated a bear-hunting dog increases with the duration of bear-baiting, resulting in a relative risk of depredation 2.12-7.22× greater in Wisconsin than Michigan. The net effect of compensation for hunting dog depredation in Wisconsin may also contribute to the difference between states. These results identified a potential tradeoff between bear hunting success and wolf/bear-hunting dog conflict. These results indicate that management options to minimize conflict exist, such as adjusting baiting regulations. If reducing depredations is an important goal, this analysis indicates that actions aside from (or in addition to) reducing wolf abundance might achieve that goal. This study also stresses the need to better understand the relationship among baiting practices, the effect of compensation on hunter behavior, and depredation

  6. The effect of weight-bearing exercise and non-weight-bearing exercise on gait in rats with sciatic nerve crush injury.

    Science.gov (United States)

    Kim, Ki-Hyun; Hwangbo, Gak; Kim, Seong-Gil

    2015-04-01

    [Purpose] The purpose of this study was to access the effect of weight bearing exercise (treadmill exercise) and non-weight-bearing exercise (swimming exercise) on gait in the recovery process after a sciatic nerve crush injury. [Subjects and Methods] Rats were randomly divided into a swimming group (n=3) with non-weight-bearing exercise after a sciatic nerve crush and a treadmill group (n=3) with weight bearing exercise after a sciatic nerve crush. Dartfish is a program that can analyze and interpret motion through video images. The knee lateral epicondyle, lateral malleolus, and metatarsophalangeal joint of the fifth toe were marked by black dots before recording. [Results] There were significant differences in TOK (knee angle toe off) and ICK (knee angle at initial contact) in the swimming group and in TOK, ICA (ankle angle at initial contact), and ICK in the treadmill group. In comparison between groups, there were significant differences in TOA (ankle angle in toe off) and ICA at the 7th day. [Conclusion] There was no difference between weight bearing and non-weight-bearing exercise in sciatic nerve damage, and both exercises accelerated the recovery process in this study.

  7. Superconducting composite for magnetic bearings

    International Nuclear Information System (INIS)

    Rigney, T.K. II.

    1995-01-01

    A composite includes granules of Type II superconducting material and granules of rare-earth permanent magnets that are distributed in a binder. The composite is a two-phase structure that combines the properties of the superconductor and magnets with the flexibility and toughness of a polymeric material. A bearing made from this composite has the load capacity and stiffness of a permanent magnet bearing with added stability from a Type II superconducting material. 7 figs

  8. FRICTION TORQUE IN THE SLIDE BEARINGS

    Directory of Open Access Journals (Sweden)

    BONDARENKO L. N.

    2016-09-01

    Full Text Available Summary. Problem statement. Until now slide bearings are used widely in engineering. But the calculation is made on obsolete method that is based on undetermined parameters such as wear of the bearing shell. It is accepted in the literature that if the shaft and liner material are homogeneous, the workpiece surface are cylindrical as they wear and contact between them occurs at all points contact arc. Research objective. The purpose of this study is determine a friction torque in the slide bearings of power-basis parameters. Conclusions. Since the friction is primarily responsible for wear of cinematic pairs “pin – liner” and “pivot – liner” slide bearings. It is shown that the friction torquesof angles wrap, that are obtained by the formulas and given in literature, are not only qualitatively but also quantitatively, namely, the calculation by literature to the formulas the friction torques are proportional to the angle wrap and the calculation by improved formulas the friction torques are inversely proportional to the angle wrap due to the reduction the normal pressure. Underreporting friction torque at large angle wrap is between 40 and 15 %. The difference in the magnitude of friction torque in the run-in and run-out cinematic pairs with real method of machining is 2...3 %, which it is possible to declare of reducing the finish of contacting surface of slide bearings.

  9. Influenza Pandemic: Gaps in Pandemic Planning and Preparedness Need to Be Addressed. Testimony before the Committee on Homeland Security, House of Representatives. GAO-09-909T

    Science.gov (United States)

    Steinhardt, Bernice

    2009-01-01

    As the current H1N1 outbreak underscores, an influenza pandemic remains a real threat to our nation. Over the past 3 years, the US Government Accountability Office (GAO) conducted a body of work, consisting of 12 reports and 4 testimonies, to help the nation better prepare for a possible pandemic. In February 2009, GAO synthesized the results of…

  10. Grizzly bear-human conflicts in the Yellowstone Ecosystem, 1992-2000

    Science.gov (United States)

    Gunther, K.A.; Haroldson, M.A.; Cain, S.L.; Copeland, J.; Frey, K.; Schwartz, C.C.

    2004-01-01

    For many years, the primary strategy for managing grizzly bears (Ursus arctos) that came into conflict with humans in the Greater Yellowstone Ecosystem (GYE) was to capture and translocate the offending bears away from conflict sites. Translocation usually only temporarily alleviated the problems and most often did not result in long-term solutions. Wildlife managers needed to be able to predict the causes, types, locations, and trends of conflicts to more efficiently allocate resources for pro-active rather than reactive management actions. To address this need, we recorded all grizzly bear-human conflicts reported in the GYE during 1992-2000. We analyzed trends in conflicts over time (increasing or decreasing), geographic location on macro- (inside or outside of the designated Yellowstone Grizzly Bear Recovery Zone [YGBRZ]) and micro- (geographic location) scales, land ownership (public or private), and relationship to the seasonal availability of bear foods. We recorded 995 grizzly bear-human conflicts in the GYE. Fifty-three percent of the conflicts occurred outside and 47% inside the YGBRZ boundary. Fifty-nine percent of the conflicts occurred on public and 41% on private land. Incidents of bears damaging property and obtaining anthropogenic foods were inversely correlated to the abundance of naturally occurring bear foods. Livestock depredations occurred independent of the availability of bear foods. To further aid in prioritizing management strategies to reduce conflicts, we also analyzed conflicts in relation to subsequent human-caused grizzly bear mortality. There were 74 human-caused grizzly bear mortalities during the study, primarily from killing bears in defense of life and property (43%) and management removal of bears involved in bear-human conflicts (28%). Other sources of human-caused mortality included illegal kills, electrocution by downed power-lines, mistaken identification by American black bear (Ursus americanus) hunters, and vehicle strikes

  11. Spatial Distribution of Black Bear Incident Reports in Michigan.

    Directory of Open Access Journals (Sweden)

    Jamie E McFadden-Hiller

    Full Text Available Interactions between humans and carnivores have existed for centuries due to competition for food and space. American black bears are increasing in abundance and populations are expanding geographically in many portions of its range, including areas that are also increasing in human density, often resulting in associated increases in human-bear conflict (hereafter, bear incidents. We used public reports of bear incidents in Michigan, USA, from 2003-2011 to assess the relative contributions of ecological and anthropogenic variables in explaining the spatial distribution of bear incidents and estimated the potential risk of bear incidents. We used weighted Normalized Difference Vegetation Index mean as an index of primary productivity, region (i.e., Upper Peninsula or Lower Peninsula, primary and secondary road densities, and percentage land cover type within 6.5-km2 circular buffers around bear incidents and random points. We developed 22 a priori models and used generalized linear models and Akaike's Information Criterion (AIC to rank models. The global model was the best compromise between model complexity and model fit (w = 0.99, with a ΔAIC 8.99 units from the second best performing model. We found that as deciduous forest cover increased, the probability of bear incident occurrence increased. Among the measured anthropogenic variables, cultivated crops and primary roads were the most important in our AIC-best model and were both positively related to the probability of bear incident occurrence. The spatial distribution of relative bear incident risk varied markedly throughout Michigan. Forest cover fragmented with agriculture and other anthropogenic activities presents an environment that likely facilitates bear incidents. Our map can help wildlife managers identify areas of bear incident occurrence, which in turn can be used to help develop strategies aimed at reducing incidents. Researchers and wildlife managers can use similar mapping

  12. Spatial Distribution of Black Bear Incident Reports in Michigan.

    Science.gov (United States)

    McFadden-Hiller, Jamie E; Beyer, Dean E; Belant, Jerrold L

    2016-01-01

    Interactions between humans and carnivores have existed for centuries due to competition for food and space. American black bears are increasing in abundance and populations are expanding geographically in many portions of its range, including areas that are also increasing in human density, often resulting in associated increases in human-bear conflict (hereafter, bear incidents). We used public reports of bear incidents in Michigan, USA, from 2003-2011 to assess the relative contributions of ecological and anthropogenic variables in explaining the spatial distribution of bear incidents and estimated the potential risk of bear incidents. We used weighted Normalized Difference Vegetation Index mean as an index of primary productivity, region (i.e., Upper Peninsula or Lower Peninsula), primary and secondary road densities, and percentage land cover type within 6.5-km2 circular buffers around bear incidents and random points. We developed 22 a priori models and used generalized linear models and Akaike's Information Criterion (AIC) to rank models. The global model was the best compromise between model complexity and model fit (w = 0.99), with a ΔAIC 8.99 units from the second best performing model. We found that as deciduous forest cover increased, the probability of bear incident occurrence increased. Among the measured anthropogenic variables, cultivated crops and primary roads were the most important in our AIC-best model and were both positively related to the probability of bear incident occurrence. The spatial distribution of relative bear incident risk varied markedly throughout Michigan. Forest cover fragmented with agriculture and other anthropogenic activities presents an environment that likely facilitates bear incidents. Our map can help wildlife managers identify areas of bear incident occurrence, which in turn can be used to help develop strategies aimed at reducing incidents. Researchers and wildlife managers can use similar mapping techniques to

  13. 49 CFR 215.113 - Defective plain bearing wedge.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Defective plain bearing wedge. 215.113 Section 215... Suspension System § 215.113 Defective plain bearing wedge. A railroad may not place or continue in service a car, if a plain bearing wedge on that car is— (a) Missing; (b) Cracked; (c) Broken; or (d) Not located...

  14. 49 CFR 215.117 - Defective roller bearing adapter.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Defective roller bearing adapter. 215.117 Section... Suspension System § 215.117 Defective roller bearing adapter. A railroad may not place or continue in service a car, if the car has a roller bearing adapter that is— (a) Cracked or broken; (b) Not in its design...

  15. Parental Power and Adolescents' Parental Identification.

    Science.gov (United States)

    Acock, Alan C.; Yang, Wen Shan

    1984-01-01

    Combines McDonald's social power of parental identification with sex-linked models of parental identification to account for the identification of daughters (N=199) and sons (N=147) with their parents. Found that because of a halo effect, a gain in identification with one parent is not at the other parent's expense. (JAC)

  16. Foster Parents' Involvement in Authoritative Parenting and Interest in Future Parenting Training

    Science.gov (United States)

    King, Keith A.; Kraemer, Linda K.; Bernard, Amy L.; Vidourek, Rebecca A.

    2007-01-01

    We surveyed 191 Southwest Ohio foster parents regarding their involvement in authoritative parenting and interest for additional parenting education. Our results showed that most respondents reported using an authoritative parenting style and were interested in receiving future training. Involvement in authoritative parenting differed…

  17. Effect of colloid (Androcoll-Bear, Percoll, and PureSperm) selection on the freezability of brown bear (Ursus arctos) sperm.

    Science.gov (United States)

    Álvarez-Rodríguez, M; Álvarez, M; Anel-López, L; López-Urueña, E; Manrique, P; Borragán, S; Morrell, J M; de Paz, P; Anel, L

    2016-04-01

    The development of a species-specific conservation protocol that involves artificial insemination with frozen semen needs to validate an effective methodology for freezing semen. Colloid centrifugation has been suggested and widely applied as an effective tool for selecting animal spermatozoa for artificial breeding. The objective of the present study was to compare different methods of centrifugation, single layer using Androcoll-Bear and Percoll and double layer using PureSperm 100 (in two different discontinuous gradients 40%-80% and 45%-90%), for the selection of fresh brown bear sperm samples. In the before freezing group, all selected samples showed a higher progressive motility and viability (except Percoll for motility 43.0 ± 5.3 [P Bear in number of damaged acrosomes, different relative to the control (control, 5.3 ± 0.6; PureSperm 80, 2.0 ± 0.3; Androcoll, 2.1 ± 0.9 [P Bear constitutes a useful tool for handling of brown bear ejaculates owing to its simple handling and procedure with a reliable sperm selection and freezability. This colloid yielded an improvement in several sperm parameters in brown bear frozen-thawed semen; the selected spermatozoa of fresh samples with this colloid showed a better resistance to freezing compared with the control sample not only for motility but also for viability. Copyright © 2016 Elsevier Inc. All rights reserved.

  18. Parenting

    Science.gov (United States)

    ... parents, people are always ready to offer advice. Parenting tips, parents' survival guides, dos, don'ts, shoulds ... right" way to be a good parent. Good parenting includes Keeping your child safe Showing affection and ...

  19. Experimental study on bearing preload optimum of machine tool spindle

    International Nuclear Information System (INIS)

    Xu Tao; Xu Guanghua; Zhang Qin; Hua Cheng; Zhang Hu; Jiang Kuosheng

    2012-01-01

    An experimental study is conducted to investigate the possibility and the effect of temperature rise and vibration level of bearing by adjusting axial preloads and radial loads in spindle bearing test rig. The shaft of the test rig is driven by a motorized high speed spindle at the range of 0∼20000 rpm. The axial preloads and radial loads on bearings are controlled by using hydraulic pressure which can be adjusted automatically. Temperature rise and radial vibration of test bearings are measured by thermocouples and Polytec portable laser vibrometer PDV100. Experiment shows that the temperature rise of bearings is nonlinear varying with the increase of radial loads, but temperature rise almost increases linearly with the increase of axial preload and rotating speed. In this paper, an alternate axial preload is used for bearings. When the rotating speed passes through the critical speed of the shaft, axial preload of bearings will have a remarkable effect. The low preload could reduce bearing vibration and temperature rise for bearings as well. At the others speed, the high preload could improve the vibration performance of high speed spindle and the bearing temperature was lower than that of the constant pressure preload spindle.

  20. Black bear density in Glacier National Park, Montana

    Science.gov (United States)

    Stetz, Jeff B.; Kendall, Katherine C.; Macleod, Amy C.

    2013-01-01

    We report the first abundance and density estimates for American black bears (Ursus americanus) in Glacier National Park (NP),Montana, USA.We used data from 2 independent and concurrent noninvasive genetic sampling methods—hair traps and bear rubs—collected during 2004 to generate individual black bear encounter histories for use in closed population mark–recapture models. We improved the precision of our abundance estimate by using noninvasive genetic detection events to develop individual-level covariates of sampling effort within the full and one-half mean maximum distance moved (MMDM) from each bear’s estimated activity center to explain capture probability heterogeneity and inform our estimate of the effective sampling area.Models including the one-halfMMDMcovariate received overwhelming Akaike’s Information Criterion support suggesting that buffering our study area by this distance would be more appropriate than no buffer or the full MMDM buffer for estimating the effectively sampled area and thereby density. Our modelaveraged super-population abundance estimate was 603 (95% CI¼522–684) black bears for Glacier NP. Our black bear density estimate (11.4 bears/100 km2, 95% CI¼9.9–13.0) was consistent with published estimates for populations that are sympatric with grizzly bears (U. arctos) and without access to spawning salmonids. Published 2013. This article is a U.S. Government work and is in the public domain in the USA.

  1. Parenting self-efficacy, parenting stress and child behaviour before and after a parenting programme.

    Science.gov (United States)

    Bloomfield, Linda; Kendall, Sally

    2012-10-01

    To explore whether changes in parenting self-efficacy after attending a parenting programme are related to changes in parenting stress and child behaviour. Adverse parenting is a risk factor in the development of a range of health and behavioural problems in childhood and is predictive of poor adult outcomes. Strategies for supporting parents are recognised as an effective way to improve the health, well-being and development of children. Parenting is influenced by many factors including the behaviour and characteristics of the child, the health and psychological well-being of the parent and the contextual influences of stress and support. Parenting difficulties are a major source of stress for parents, and parenting self-efficacy has been shown to be an important buffer against parenting stress. In all, 63 parents who had a child under the age of 10 years took part in the research. Of those, 58 returned completed measures of parenting self-efficacy, parenting stress and child behaviour at the start of a parenting programme and 37 at three-month follow-up. Improvements in parenting self-efficacy and parenting stress were found at follow-up, but there was less evidence for improvements in child behaviour. The findings clearly suggest a relationship between parenting self-efficacy and parenting stress; parents who are feeling less efficacious experience higher levels of stress, whereas greater parenting self-efficacy is related to less stress. This study adds to the evidence that parent outcomes may be a more reliable measure of programme effectiveness than child outcomes at least in the short term.

  2. Acoustic Emission Monitoring of Incipient Failure in Journal Bearings( III ) - Development of AE Diagnosis System for Journal Bearings -

    International Nuclear Information System (INIS)

    Chung, Min Hwa; Cho, Yong Sang; Yoon, Dong Jin; Kwon, Oh Yang

    1996-01-01

    For the condition monitoring of the journal bearing in rotating machinery, a system for their diagnosis by acoustic emission(AE) was developed. AE has been used to detect abnormal conditions in the bearing system. It was found from the field application study as well as the laboratory experiment using a simulated journal bearing system that AE RMS voltage was the most efficient parameter for the purpose of current study. Based on the above results, algorithms and judgement criteria for the diagnosis system was established. The system is composed of four parts as follows: the sensing part including AE sensor and preamplifier, the signal processing part for RMS-to-DC conversion to measure AE ms voltage, the interface part for transferring RMS voltage data into PC using A/D converter, and the software part including the graphic display of bearing conditions and the diagnosis program

  3. Numerical investigation of cavitation flow in journal bearing geometry

    Science.gov (United States)

    Riedel, M.; Schmidt, M.; Stücke, P.

    2013-04-01

    The appearance of cavitation is still a problem in technical and industrial applications. Especially in automotive internal combustion engines, hydrodynamic journal bearings are used due to their favourable wearing quality and operating characteristics. Cavitation flows inside the bearings reduces the load capacity and leads to a risk of material damages. Therefore an understanding of the complex flow phenomena inside the bearing is necessary for the design development of hydrodynamic journal bearings. Experimental investigations in the fluid domain of the journal bearing are difficult to realize founded by the small dimensions of the bearing. In the recent years more and more the advantages of the computational fluid dynamics (CFD) are used to investigate the detail of the cavitation flows. The analysis in the paper is carried out in a two-step approach. At first an experimental investigation of journal bearing including cavitation is selected from the literature. The complex numerical model validated with the experimental measured data. In a second step, typically design parameters, such as a groove and feed hole, which are necessary to distribute the oil supply across the gap were added into the model. The paper reflects on the influence of the used design parameters and the variation of the additional supply flow rate through the feed hole regarding to cavitation effects in the bearing. Detailed pictures of the three-dimensional flow structures and the cavitation regions inside the flow film of the bearing are presented.

  4. Numerical investigation of cavitation flow in journal bearing geometry

    Directory of Open Access Journals (Sweden)

    Stücke P.

    2013-04-01

    Full Text Available The appearance of cavitation is still a problem in technical and industrial applications. Especially in automotive internal combustion engines, hydrodynamic journal bearings are used due to their favourable wearing quality and operating characteristics. Cavitation flows inside the bearings reduces the load capacity and leads to a risk of material damages. Therefore an understanding of the complex flow phenomena inside the bearing is necessary for the design development of hydrodynamic journal bearings. Experimental investigations in the fluid domain of the journal bearing are difficult to realize founded by the small dimensions of the bearing. In the recent years more and more the advantages of the computational fluid dynamics (CFD are used to investigate the detail of the cavitation flows. The analysis in the paper is carried out in a two-step approach. At first an experimental investigation of journal bearing including cavitation is selected from the literature. The complex numerical model validated with the experimental measured data. In a second step, typically design parameters, such as a groove and feed hole, which are necessary to distribute the oil supply across the gap were added into the model. The paper reflects on the influence of the used design parameters and the variation of the additional supply flow rate through the feed hole regarding to cavitation effects in the bearing. Detailed pictures of the three-dimensional flow structures and the cavitation regions inside the flow film of the bearing are presented.

  5. Modeling of Tilting-Pad Journal Bearings with Transfer Functions

    Directory of Open Access Journals (Sweden)

    J. A. Vázquez

    2001-01-01

    Full Text Available Tilting-pad journal bearings are widely used to promote stability in modern rotating machinery. However, the dynamics associated with pad motion alters this stabilizing capacity depending on the operating speed of the machine and the bearing geometric parameters, particularly the bearing preload. In modeling the dynamics of the entire rotor-bearing system, the rotor is augmented with a model of the bearings. This model may explicitly include the pad degrees of freedom or may implicitly include them by using dynamic matrix reduction methods. The dynamic reduction models may be represented as a set of polynomials in the eigenvalues of the system used to determine stability. All tilting-pad bearings can then be represented by a fixed size matrix with polynomial elements interacting with the rotor. This paper presents a procedure to calculate the coefficients of polynomials for implicit bearing models. The order of the polynomials changes to reflect the number of pads in the bearings. This results in a very compact and computationally efficient method for fully including the dynamics of tilting-pad bearings or other multiple degrees of freedom components that interact with rotors. The fixed size of the dynamic reduction matrices permits the method to be easily incorporated into rotor dynamic stability codes. A recursive algorithm is developed and presented for calculating the coefficients of the polynomials. The method is applied to stability calculations for a model of a typical industrial compressor.

  6. Changes in plain bearing technology

    CERN Document Server

    Koring, Rolf

    2012-01-01

    A unique fusion of theoretical and practical knowledge, Changes in Plain Bearing Technology, by Rolf Koring, covers a meaningful range of expertise in this field.Drawing from years of experience in design development, materials selection, and their correlation to real-life part failure, this title, co-published by SAE International and expert Verlag (Germany), concentrates on hydrodynamic bearings lined with white metals, also known as Babbits.Written under the assumption that even the most mature body of knowledge can be revisited and improved, Changes in Plain Bearing Technology is a courageous and focused approach to questioning accepted test results and looking at alternative material compounds, and their application suitability.The process, which leads to innovative answers on how the technology is transforming itself to respond to new market requirements, shows how interdisciplinary thinking can recognize new potential in long-established industrial modus operandi.Tackling the highly complex issue of co...

  7. Aviation security : TSA is increasing procurement and deployment of the advanced imaging technology, but challenges to this effort and other areas of aviation security remain : testimony before the Subcommittee on Transportation Security and Infrastructur

    Science.gov (United States)

    2010-03-17

    The attempted bombing of Northwest flight 253 highlighted the importance of detecting improvised explosive devices on passengers. This testimony focuses on (1) the Transportation Security Administrations (TSA) efforts to procure and deploy advance...

  8. Foil bearing performance in liquid nitrogen and liquid oxygen

    Science.gov (United States)

    Genge, Gary G.; Saville, Marshall; Gu, Alston

    1993-01-01

    Space transfer vehicles and other power and propulsion systems require long-life turbopumps. Rolling-element bearings used in current turbopumps do not have sufficient life for these applications. Process fluid foil bearings have established long life, with exceptional reliability, over a wide range of temperatures and fluids in many high-speed turbomachinery applications. However, actual data on bearing performance in cryogenic fluids has been minimal. The National Aeronautics and Space Administration (NASA) and AlliedSignal Aerospace Systems and Equipment (ASE) have attempted to characterize the leaf-type compliant foil bearing in oxygen and nitrogen. The work performed under a joint internal research and development program between Marshall Space Flight Center (MSFC) and ASE demonstrated that the foil bearing has load capacities of at least 266 psi in liquid oxygen and 352 psi in liquid nitrogen. In addition, the bearing demonstrated a direct damping coefficient of 40 to 50 lb-sec/in. with a damping ratio of .7 to 1.4 in. liquid nitrogen using a bearing sized for upper-stage turbopumps. With the results from this testing and the years of successful use in air cycle machines and other applications, leaf-type compliant foil bearings are ready for testing in liquid oxygen turbopumps.

  9. Black bears in Arkansas: Characteristics of a successful translocation

    Science.gov (United States)

    Smith, Kimberly G.; Clark, Joseph D.

    1994-01-01

    In 1958, the Arkansas Game and Fish Commission began translocating black bears (Ursus americanus) from Minnesota to the Interior Highlands (Ozark and Ouachita mountains) of Arkansas where bears had been extirpated early in this century. This project continued for 11 years with little public imput, during which time an estimated 254 bears were released. We estimate there are now >2,500 bears in the Interior Highlands of Arkansas, Missouri, and Oklahoma, making it one of the most successful translocations of a Carnivora. Factors that contributed to the success include use of wild-captured animals, elimination of major factors associated with extirpation, release into prime habitats within the former range, multiple release sites, release of 20–40 animals/year for eight years, and release of mostly males prior to release of mostly females. Studies on two allopatric populations demonstrate that they are now diverging in some demographic characteristics, including litter size, cub survivorship, and adult sex-ratio. Translocation of black bears to the Interior Highlands is successful in terms of numbers of animals, but it will not be truly successful until people accept black bears as part of the regional fauna. To that end, those associated with management and research of bears in Arkansas are now focussing on public education and control of nuisance bears.

  10. Modelling of Rotor-gas bearings for Feedback Controller Design

    DEFF Research Database (Denmark)

    Theisen, Lukas Roy Svane; Niemann, Hans Henrik

    2014-01-01

    Controllable rotor-gas bearings are popular oering adaptability, high speed operation, low friction and clean operation. Rotor-gas bearings are however highly sensitive to disturbances due to the low friction of the injected gas. These undesirable damping properties call for controllers, which ca...... and are shown to accurately describe the dynamical behaviour of the rotor-gas bearing. Design of a controller using the identied models is treated and experiments verify the improvement of the damping properties of the rotor-gas bearing.......Controllable rotor-gas bearings are popular oering adaptability, high speed operation, low friction and clean operation. Rotor-gas bearings are however highly sensitive to disturbances due to the low friction of the injected gas. These undesirable damping properties call for controllers, which can...... be designed from suitable models describing the relation from actuator input to measured shaft position. Current state of the art models of controllable gas bearings however do not provide such relation, which calls for alternative strategies. The present contribution discusses the challenges for feedback...

  11. Parenting stress among mothers of children with different physical, mental, and psychological problems

    Directory of Open Access Journals (Sweden)

    Awat Feizi

    2014-01-01

    Full Text Available Background: Parents of children with developmental problems are always bearing a load of stress. The aim of this study is to compare the stress in mothers of children with different disabilities to each other, considering their demographic background. Materials and Methods: This was a cross-sectional study conducted in Isfahan, Iran during 2012 on 285 mothers of 6-12 years old children with chronic physical disease, psychological disorder, and sensory-motor and mental problems. Abedin′s parenting stress questionnaire was used and obtained data were analyzed using multivariate analysis of variance or covariance as appropriate. Results: Mothers of children with sensory-motor mental and chronic physical problems experience more stress than mothers of children with psychological disorders (P < 0.05. The stress score of mothers of children with psychological disorders was lower than the other two groups. Also there was a significant difference between the score of mothers of children with chronic physical problems and mothers of children with psychological disorders regarding parent-child dysfunctional interaction (P < 0.01. A significant difference was observed in terms of stress among mothers of children with sensory-motor mental problems with different number of children (P < 0.05; also mothers of children with chronic physical problems in different levels of education have experienced different levels of parenting stress (P < 0.05 Conclusion: Due to high level of parenting stress among our studied samples, special education and early intervention are needed for parents in our study population in order to deepening their diagnostic knowledge and professional consultation on stress management

  12. Structure Design and Performance Analysis of High-Speed Miniature Ball Bearing

    Science.gov (United States)

    Li, Songsheng; Zhang, Guoye; Chen, Bin; Shen, Yuan

    2017-07-01

    The working performances of miniature ball bearings are obviously affected by its’ geometric structure parameters. In this paper, quasi-static analysis theory is applied in the design of miniature ball bearings. Firstly, it is studied the influence of geometry structure, preload and rotating speed on the dynamic performance of bearing. Secondly, bearing dynamic characteristics are analyzed which include the bearing stiffness and Spin to roll Ratio. Lastly, the contact stress and bearing life are calculated. The results indicate that structure parameters play an importance role in bearing’s dynamic performances. Miniature ball bearings which have lager ball number, bigger ball diameter and smaller inner race groove radius can get better performances while velocity and preload have great impact on the bearing life. So that parameters of miniature bearing should be chosen cautiously.

  13. Gerotor and bearing system for whirling mass orbital vibrator

    Energy Technology Data Exchange (ETDEWEB)

    Brett, James Ford; Westermark, Robert Victor; Turner, Jr., Joey Earl; Lovin, Samuel Scott; Cole, Jack Howard; Myers, Will

    2007-02-27

    A gerotor and bearing apparatus for a whirling mass orbital vibrator which generates vibration in a borehole. The apparatus includes a gerotor with an inner gear rotated by a shaft having one less lobe than an outer gear. A whirling mass is attached to the shaft. At least one bearing is attached to the shaft so that the bearing engages at least one sleeve. A mechanism is provided to rotate the inner gear, the mass and the bearing in a selected rotational direction in order to cause the mass, the inner gear, and the bearing to backwards whirl in an opposite rotational direction. The backwards whirling mass creates seismic vibrations.

  14. Bearing Assembly With Carbonate Resistant Anti-Seizing Properties

    Science.gov (United States)

    2014-01-28

    surface. Dkt . No. 101805 Application No. ?? REPLACEMENT SHEET? /21 LINEAR MOVEMENT ROTATIONAL MOVEMENT BEARING SURFACE ROTOR OR SLIDER BEARING ROTOR...OR SLIDER BEARING SHAFT FIG. 1 (PRIOR ART) FIG. 2 (PRIOR ART) Dkt . No. 101805 Application No. ?? REPLACEMENT SHEET? /22 100 110 112 114 120 118 116 120 118 114 112 110 LINEAR MOVEMENT ROTATIONAL MOVEMENT 100 FIG. 3 FIG. 4

  15. Fatigue life of drilling bit bearings under arbitrary random loads

    Energy Technology Data Exchange (ETDEWEB)

    Talimi, M.; Farshidi, R. [Calgary Univ., AB (Canada)

    2009-07-01

    A fatigue analysis was conducted in order to estimate the bearing life of a roller cone rock bit under arbitrary random loads. The aim of the study was to reduce bearing failures that can interrupt well operations. Fatigue was considered as the main reason for bearing failure. The expected value of cumulative fatigue damage was used to estimate bearing life. An equation was used to express the relation between bearing life and bearing load when the bearing was subjected to a steady load and constant speed. The Palmgren-Miner hypothesis was used to determine the ultimate tensile strength of the material. The rain flow counting principle was used to determine distinct amplitude cycles. Hertzian equations were used to determine maximum stress loads. Fourier series were used to obtain simple harmonic functions for estimating stress-life relations. It was concluded that the method can be used during the well planning phase to prevent bearing failures. 6 refs.

  16. Monitoring of lubrication conditions in journal bearing by acoustic emission

    International Nuclear Information System (INIS)

    Yoon, Dong Jin; Kwon, Oh Yang; Jung, Min Hwa

    1993-01-01

    Systems with journal bearings generally operate in large scale and under severe loading conditions such as steam generator turbines and internal combustion engines, in contrast to the machinery using rolling element bearings. Failure of the bearings in these machinery can result in the system breakdown. To avoid the time consuming repair and considerable economic loss, the detection of incipient failure in journal bearings becomes very important. In this experimental approach, acoustic emission monitoring is employed to the detection of incipient failure caused by intervention of foreign particles most probable in the journal bearing systems. It has been known that the intervention of foreign materials, insufficient lubrication and misassembly etc. are principal factors to cause bearing failure and distress. The experiment was conducted under such designed conditions as inserting alumina particles to the lubrication layer in the simulated journal bearing system. The results showed that acoustic emission could be an effective tool to detect the incipient failure in journal bearings.

  17. Experimental Study and Dynamic Modeling of Metal Rubber Isolating Bearing

    International Nuclear Information System (INIS)

    Zhang, Ke; Zhou, Yanguo; Jiang, Jian

    2015-01-01

    In this paper, dynamic shear mechanical properties of a new metal rubber isolating bearing is tested and studied. The mixed damping model is provided for theoretical modeling of MR isolating bearing, the shear stiffness and damping characteristics of the MR bearing can be analyzed separately and easily discussed, and the mixed damping model is proved to be an rather effective approach. The test results indicate that loading frequency bears little impact over shear property of metal rubber isolating bearing, the total energy consumption of metal rubber isolating bearing increases with the increase in loading amplitude. With the increase in loading amplitude, the stiffness of the isolating bearing will reduce showing its “soft property”; and the type of damping force gradually changes to be close to dry friction. The features of “soft property” and dry friction energy consumption of metal rubber isolating bearing are very useful in practical engineering application. (paper)

  18. Vascular injuries after bear attacks: Incidence, surgical challenges and outcome.

    Science.gov (United States)

    Wani, Mohd Lateef; Ahangar, Abdul Gani; Lone, Gh Nabi; Lone, Reyaz Ahmad; Ashraf, Hakeem Zubair; Dar, Abdul Majeed; Bhat, M A; Singh, Shyam; Bijli, Akram Hussain; Irshad, Ifat

    2011-01-01

    Bear mauling is rarely reported in medical literature due to its rare occurrence. Present study was undertaken to describe the pattern and management of bear maul vascular injuries in Kashmir. Study of patients with bear maul vascular injury from 1(st) Jan 2004 to 31(st) Dec. 2008. Fifteen patients with bear maul vascular injury were studied. All patients of bear maul without vascular injury were excluded from the study. Most of the patients were treated by reverse saphenous vein graft or end to end anastomosis. Most common complication was wound infection (20%) followed by graft occlusion (13.33%). There was no operative death. Bear attacks are very common in Kashmir. Vascular injury due to bear maul needs prompt resuscitation and revascularization. Results are very good provided timely intervention for revascularization is done.

  19. Brown bear-human interactions associated with deer hunting on Kodiak Island

    Science.gov (United States)

    Barnes, Victor G.

    1994-01-01

    I compared distribution and range of brown bears (Ursus arctos middendorffi) with temporal and spatial distribution of Sitka black-tailed deer (Odocoileus hemionus sitkensis) hunting activity on westside Kodiak Island, Alaska, to examine impacts of deer hunting on bears. Mean number of bears that annually ranged ≤5 km from the coast, >5 km inland from the coast, or in both areas was 10, 8, and 11, respectively. Bears that exclusively or seasonally occupied the coast zone were usually classed as having moderate or high potential to interact with hunters because most hunter access and effort (>95%) was via the coast. Bears that ranged exclusively inland were considered unlikely to encounter hunters. Animals that ranged in both zones often (39%) moved inland during fall (Oct-Dec) and most bears (70%) denned in the inland zone. Females that denned near the coast entered dens later (x̄ = 22 Nov) than females that denned inland (x̄ = 12 Nov). Two radio-collared bears were known to raid deer-hunting camps and 9 other marked bears were observed by hunters or were located bear during their hunt. Seven to 21% of the respondents reported having a threatening encounter with a bear and 5-26% reported losing deer meat to bears. Human-induced mortality to radio-collared bears occurred more often near the coast (5) than inland (3); 7 bears were harvested by sport hunters and 1 was killed (nonsport) in a Native village. Deer hunters killed 2 unmarked females in defense of life or property situations in the study area. High bear densities and concentrated deer-hunting activity combine to make conflicts unavoidable. Adverse impacts to bears can be minimized by maintaining low levels of human activity in inland areas and improving hunter awareness of bear ecology and behavior.

  20. A circumpolar monitoring framework for polar bears

    Science.gov (United States)

    Vongraven, Dag; Aars, Jon; Amstrup, Steven C.; Atkinson, Stephen N.; Belikov, Stanislav; Born, Erik W.; DeBruyn, T.D.; Derocher, Andrew E.; Durner, George M.; Gill, Michael J.; Lunn, Nicholas J.; Obbard, Martyn E.; Omelak, Jack; Ovsyanikov, Nikita; Peacock, Elizabeth; Richardson, E.E.; Sahanatien, Vicki; Stirling, Ian; Wiig, Øystein

    2012-01-01

    Polar bears (Ursus maritimus) occupy remote regions that are characterized by harsh weather and limited access. Polar bear populations can only persist where temporal and spatial availability of sea ice provides adequate access to their marine mammal prey. Observed declines in sea ice availability will continue as long as greenhouse gas concentrations rise. At the same time, human intrusion and pollution levels in the Arctic are expected to increase. A circumpolar understanding of the cumulative impacts of current and future stressors is lacking, long-term trends are known from only a few subpopulations, and there is no globally coordinated effort to monitor effects of stressors. Here, we describe a framework for an integrated circumpolar monitoring plan to detect ongoing patterns, predict future trends, and identify the most vulnerable polar bear subpopulations. We recommend strategies for monitoring subpopulation abundance and trends, reproduction, survival, ecosystem change, human-caused mortality, human–bear conflict, prey availability, health, stature, distribution, behavioral change, and the effects that monitoring itself may have on polar bears. We assign monitoring intensity for each subpopulation through adaptive assessment of the quality of existing baseline data and research accessibility. A global perspective is achieved by recommending high intensity monitoring for at least one subpopulation in each of four major polar bear ecoregions. Collection of data on harvest, where it occurs, and remote sensing of habitat, should occur with the same intensity for all subpopulations. We outline how local traditional knowledge may most effectively be combined with the best scientific methods to provide comparable and complementary lines of evidence. We also outline how previously collected intensive monitoring data may be sub-sampled to guide future sampling frequencies and develop indirect estimates or indices of subpopulation status. Adoption of this framework

  1. Mass Loss Rates of Fasting Polar Bears.

    Science.gov (United States)

    Pilfold, Nicholas W; Hedman, Daryll; Stirling, Ian; Derocher, Andrew E; Lunn, Nicholas J; Richardson, Evan

    2016-01-01

    Polar bears (Ursus maritimus) have adapted to an annual cyclic regime of feeding and fasting, which is extreme in seasonal sea ice regions of the Arctic. As a consequence of climate change, sea ice breakup has become earlier and the duration of the open-water period through which polar bears must rely on fat reserves has increased. To date, there is limited empirical data with which to evaluate the potential energetic capacity of polar bears to withstand longer fasts. We measured the incoming and outgoing mass of inactive polar bears (n = 142) that were temporarily detained by Manitoba Conservation and Water Stewardship during the open-water period near the town of Churchill, Manitoba, Canada, in 2009-2014. Polar bears were given access to water but not food and held for a median length of 17 d. Median mass loss rates were 1.0 kg/d, while median mass-specific loss rates were 0.5%/d, similar to other species with high adiposity and prolonged fasting capacities. Mass loss by unfed captive adult males was identical to that lost by free-ranging individuals, suggesting that terrestrial feeding contributes little to offset mass loss. The inferred metabolic rate was comparable to a basal mammalian rate, suggesting that while on land, polar bears can maintain a depressed metabolic rate to conserve energy. Finally, we estimated time to starvation for subadults and adult males for the on-land period. Results suggest that at 180 d of fasting, 56%-63% of subadults and 18%-24% of adult males in this study would die of starvation. Results corroborate previous assessments on the limits of polar bear capacity to withstand lengthening ice-free seasons and emphasize the greater sensitivity of subadults to changes in sea ice phenology.

  2. Diagnosis of Bearing System using Minimum Variance Cepstrum

    International Nuclear Information System (INIS)

    Lee, Jeong Han; Choi, Young Chul; Park, Jin Ho; Lee, Won Hyung; Kim, Chan Joong

    2005-01-01

    Various bearings are commonly used in rotating machines. The noise and vibration signals that can be obtained from the machines often convey the information of faults and these locations. Monitoring conditions for bearings have received considerable attention for many years, because the majority of problems in rotating machines are caused by faulty bearings. Thus failure alarm for the bearing system is often based on the detection of the onset of localized faults. Many methods are available for detecting faults in the bearing system. The majority of these methods assume that faults in bearings produce impulses. Impulse events can be attributed to bearing faults in the system. McFadden and Smith used the bandpass filter to filter the noise signal and then obtained the envelope by using the envelope detector. D. Ho and R. B Randall also tried envelope spectrum to detect faults in the bearing system, but it is very difficult to find resonant frequency in the noisy environments. S. -K. Lee and P. R. White used improved ANC (adaptive noise cancellation) to find faults. The basic idea of this technique is to remove the noise from the measured vibration signal, but they are not able to show the theoretical foundation of the proposed algorithms. Y.-H. Kim et al. used a moving window. This algorithm is quite powerful in the early detection of faults in a ball bearing system, but it is difficult to decide initial time and step size of the moving window. The early fault signal that is caused by microscopic cracks is commonly embedded in noise. Therefore, the success of detecting fault signal is completely determined by a method's ability to distinguish signal and noise. In 1969, Capon coined maximum likelihood (ML) spectra which estimate a mixed spectrum consisting of line spectrum, corresponding to a deterministic random process, plus arbitrary unknown continuous spectrum. The unique feature of these spectra is that it can detect sinusoidal signal from noise. Our idea

  3. Nonlinear Dynamical Analysis for a Plain Bearing

    Directory of Open Access Journals (Sweden)

    Ali Belhamra

    2014-03-01

    Full Text Available This paper investigates the nonlinear dynamic behavior for a plain classic bearing (fluid bearing lubricated by a non-Newtonian fluid of a turbo machine rotating with high speed; this type of fluid contains additives viscosity (couple-stress fluid film. The solution of the nonlinear dynamic problem of this type of bearing is determined with a spatial discretisation of the modified Reynolds' equation written in dynamic mode by using the optimized short bearing theory and a temporal discretisation for equations of rotor motion by the help of Euler's explicit diagram. This study analyzes the dynamic behavior of a rotor supported by two couple-stress fluid film journal lubricant enhances the dynamic stability of the rotor-bearing system considerably compared to that obtained when using a traditional Newtonian lubricant. The analysis shows that the dynamic behavior of a shaft which turns with high velocities is strongly nonlinear even for poor eccentricities of unbalance; the presence of parameters of couple stress allows strongly attenuating the will synchrony (unbalance and asynchrony (whipping amplitudes of vibrations of the shaft which supports more severe conditions (large unbalances.

  4. Novel maglev pump with a combined magnetic bearing.

    Science.gov (United States)

    Onuma, Hiroyuki; Murakami, Michiko; Masuzawa, Toru

    2005-01-01

    The newly developed pump is a magnetically levitated centrifugal blood pump in which active and passive magnetic bearings are integrated to construct a durable ventricular assist device. The developed maglev centrifugal pump consists of an active magnetic bearing, a passive magnetic bearing, a levitated impeller, and a motor stator. The impeller is set between the active magnetic bearing and the motor stator. The active magnetic bearing uses four electromagnets to control the tilt and the axial position of the impeller. The radial movement of the levitated impeller is restricted with the passive stability dependent upon the top stator and the passive permanent magnetic bearing to reduce the energy consumption and the control system complexity. The top stator was designed based upon a magnetic field analysis to develop the maglev pump with sufficient passive stability in the radial direction. By implementing this analysis design, the oscillating amplitude of the impeller in the radial direction was cut in half when compared with the simple shape stator. This study concluded that the newly developed maglev centrifugal pump displayed excellent levitation performance and sufficient pump performance as a ventricular assist device.

  5. 5 CFR 1651.7 - Parent or parents.

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 3 2010-01-01 2010-01-01 false Parent or parents. 1651.7 Section 1651.7 Administrative Personnel FEDERAL RETIREMENT THRIFT INVESTMENT BOARD DEATH BENEFITS § 1651.7 Parent or parents. If the account is to be paid to the participant's parent or parents under § 1651.2(a)(4), the following...

  6. RELATIONSHIP BETWEEN ROLLING AND SLIP RESISTANCE IN ROLLING BEARINGS

    Directory of Open Access Journals (Sweden)

    L. M. Bondarenko

    2016-06-01

    Full Text Available Purpose. About one of the causes of slip rolling is known from the second half of the 19th century, it was believed that the slip resistance appears at the place of contact due to different speeds on the arc of contact. Only in the mid-20th century it was proved that this resistance is negligible in rolling resistance. However (for some unknown reason it is ignored the fact that in practice in rolling bearings may rotate both the inner ring with a stationary outer one, and vice versa almost in equal relations. It is not taken into account the fact that the ball or roller in the rolling bearings runs the different distance along the roller path of the outer and inner bearing cages in one revolution. This fact is not taken into account in determining the calculated values for the friction coefficient of a rolling bearing reduced to the shaft. Therefore, the aim of this work is to determine the influence of path length on the track riding the outer and inner race of the bearing on the determination of the calculated value of the coefficient of friction of rolling bearings is given to the shaft. Methodology. The solution technique is based on the theory of plane motion of a rigid body, the theory of Hertzian contact deformation and the analytical dependencies for determination of coefficient of rolling friction. Findings. The obtained dependences on determination of rolling resistance of the balls or rollers along the bearing tracks of inner and outer bearing cages as well as path difference metering of the rolling on them allows to analytically obtain the rolling resistance and slipping for any size of bearings and different devices of bearing units. It is also possible at the design stage of rolling nodes to handle not only the design but also the content of the node. Originality. Using the analytical dependences for determination of the rolling resistance of bodies at point and line contacts, and also account for the difference in the path of the

  7. [Correlative analysis on metatarsalgia and the X-ray measurement indexes under weight-bearing and non-weight-bearing of hallux valgus].

    Science.gov (United States)

    Gong, Hao; Sang, Zhi-Cheng; Wen, Jian-Min; Sun, Wei-Dong; Hu, Hai-Wei; Zhang, Yong-Chao; Zuo, Jian-Gang; Wang, Hai-Xiong

    2014-04-01

    To study changes in the radiographic appearance during weight-bearing and non-weigh-bearing in hallux valgus, and to analyse the correlation between the elasticity of plantar soft tissue of hallux valgus and the pain under the metatarsal head. From May 2012 to October 2012, 240 feet of 120 patients with hallux valgus were enrolled in the study. The degrees of the pian under the metatarsal head of all the patients were observed. AP and lateral X-ray films of feet were taken on the condition of weight-bearing and non-weight-bearing. So the hallux valgus angle (HVA), the inter-metatarsal angle between the first and second metatarsals (IM1-2), the inter-metatarsal angle between the first and fifth metatarsals (IM1-5), top angle of the medial longitudinal arch (TAOTMLA),and anterior angle of the medial longitudinal arch (AAOTMLA) were measured on the X-ray films. The differences of HVA, IM1-2, IM1-5, TAOTMLA and AAOTMLA between two groups were compared, and the correlation between the changes of IM1-2, IM 1-5, TAOTMLA, AAOTMLA and the degree of the pain under the metatarsal head were analysed. One hundred and forty-eight feet had the pain under the metatarsal head. The IM1-2, IM1-5 and TAOTMLA increased on weight-bearing position compared with those on non-weight-bearing position, but the HVA and AAOTMLA decreased on weight-bearing position compared with those on non-weight-bearing position. There was a moderate relationship between the changes of IM 1-2,IM1-5 and the degree of the hallux valgus deformity, as well as the relationship between the different of IM1-5 and the degree of the pian under the metatarsal head. The degree of the collapse of the arch of foot with hallux valgus becomes serious with its deformity increasing. The pain under the metatarsal head of hallux valgus increases with the increased changes of IM 1-2,IM 1-5 and TAOTMLA. Analysis of the X-ray observation indexes of hallux valgus on weight-bearing position and non-weight-bearing position has

  8. Lead-free bearing alloys for engine applications

    Science.gov (United States)

    Ratke, Lorenz; Ågren, John; Ludwig, Andreas; Tonn, Babette; Gránásy, László; Mathiesen, Ragnvald; Arnberg, Lars; Anger, Gerd; Reifenhäuser, Bernd; Lauer, Michael; Garen, Rune; Gust, Edgar

    2005-10-01

    Recent developments to reduce the fuel consumption, emission and air pollution, size and weight of engines for automotive, truck, ship propulsion and electrical power generation lead to temperature and load conditions within the engines that cannot be borne by conventional bearings. Presently, only costly multilayer bearings with electroplated or sputtered surface coatings can cope with the load/speed combinations required. Ecological considerations in recent years led to a ban by the European Commission on the use of lead in cars a problem for the standard bronze-lead bearing material. This MAP project is therefore developing an aluminium-based lead-free bearing material with sufficient hardness, wear and friction properties and good corrosion resistance. Only alloys made of components immiscible in the molten state can meet the demanding requirements. Space experimentation plays a crucial role in optimising the cast microstructure for such applications.

  9. Actividades Para Padres: A Parent Handbook (Activities for Parents: A Parent Handbook).

    Science.gov (United States)

    Coca, Benjamin

    Thirty Mora, New Mexico parents attended a 13-session parent involvement workshop (The Mora Adventure) designed to help parents foster successful school experiences through non-school activities with their children. A parent involvement model was used as the basis of the workshop in which the parents developed more effective communication skills;…

  10. Rotor Vibration Reduction via Active Hybrid Bearings

    DEFF Research Database (Denmark)

    Nicoletti, Rodrigo; Santos, Ilmar

    2002-01-01

    The use of fluid power to reduce and control rotor vibration in rotating machines is investigated. An active hybrid bearing is studied, whose main objective is to reduce wear and vibration between rotating and stationary machinery parts. By injecting pressurised oil into the oil film, through...... orifices machined in the bearing pads, one can alter the machine dynamic characteristics, thus enhancing its operational range. A mathematical model of the rotor-bearing system, as well as of the hydraulic system, is presented. Numerical results of the system frequency response show good agreement...

  11. Camshaft bearing arrangement for overhead cam engine

    Energy Technology Data Exchange (ETDEWEB)

    Yoshikawa, M.

    1985-01-01

    In an assembly for an internal combustion engine comprising a cylinder block, a cylinder head detachably affixed to the cylinder block by a plurality of threaded fastening means, a plurality of poppet valves supported for reciprocation in the cylinder head and a camshaft for operating the poppet valves, the improvement is described comprising a cam carrier detachably affixed to the cylinder head and overlying the threaded fastening means, and a bearing cap affixed to the cam carrier. The cam carrier and the bearing cap have bearing surfaces for journaling the camshaft.

  12. Compressor ported shroud for foil bearing cooling

    Science.gov (United States)

    Elpern, David G [Los Angeles, CA; McCabe, Niall [Torrance, CA; Gee, Mark [South Pasadena, CA

    2011-08-02

    A compressor ported shroud takes compressed air from the shroud of the compressor before it is completely compressed and delivers it to foil bearings. The compressed air has a lower pressure and temperature than compressed outlet air. The lower temperature of the air means that less air needs to be bled off from the compressor to cool the foil bearings. This increases the overall system efficiency due to the reduced mass flow requirements of the lower temperature air. By taking the air at a lower pressure, less work is lost compressing the bearing cooling air.

  13. Failure analysis of superconducting bearings

    Energy Technology Data Exchange (ETDEWEB)

    Rastogi, Amit; Campbell, A M; Coombs, T A [Department of Engineering, University of Cambridge, Cambridge CB2 1PZ (United Kingdom)

    2006-06-01

    The dynamics of superconductor bearings in a cryogenic failure scenario have been analyzed. As the superconductor warms up, the rotor goes through multiple resonance frequencies, begins to slow down and finally touches down when the superconductor goes through its transition temperature. The bearing can be modelled as a system of springs with axial, radial and cross stiffness. These springs go through various resonant modes as the temperature of the superconductor begins to rise. We have presented possible explanations for such behavio0008.

  14. Bear-baiting may exacerbate wolf-hunting dog conflict.

    Directory of Open Access Journals (Sweden)

    Joseph K Bump

    Full Text Available BACKGROUND: The influence of policy on the incidence of human-wildlife conflict can be complex and not entirely anticipated. Policies for managing bear hunter success and depredation on hunting dogs by wolves represent an important case because with increasing wolves, depredations are expected to increase. This case is challenging because compensation for wolf depredation on hunting dogs as compared to livestock is less common and more likely to be opposed. Therefore, actions that minimize the likelihood of such conflicts are a conservation need. METHODOLOGY/PRINCIPAL FINDINGS: We used data from two US states with similar wolf populations but markedly different wolf/hunting dog depredation patterns to examine the influence of bear hunting regulations, bear hunter to wolf ratios, hunter method, and hunter effort on wolf depredation trends. Results indicated that the ratio of bear hunting permits sold per wolf, and hunter method are important factors affecting wolf depredation trends in the Upper Great Lakes region, but strong differences exist between Michigan and Wisconsin related in part to the timing and duration of bear-baiting (i.e., free feeding. The probability that a wolf depredated a bear-hunting dog increases with the duration of bear-baiting, resulting in a relative risk of depredation 2.12-7.22× greater in Wisconsin than Michigan. The net effect of compensation for hunting dog depredation in Wisconsin may also contribute to the difference between states. CONCLUSIONS/SIGNIFICANCE: These results identified a potential tradeoff between bear hunting success and wolf/bear-hunting dog conflict. These results indicate that management options to minimize conflict exist, such as adjusting baiting regulations. If reducing depredations is an important goal, this analysis indicates that actions aside from (or in addition to reducing wolf abundance might achieve that goal. This study also stresses the need to better understand the relationship

  15. On the computation of electrical resistance of hydrodynamic journal bearing

    Directory of Open Access Journals (Sweden)

    Eleonora Pop

    2014-12-01

    Full Text Available The paper approaches the mathematical model of electrical resistance of hydrodynamic journal bearing under different parameters of operation so as to predict bearing performance and safe load carrying capacity. The currents circulating in the journal bearing of electrical machine causes reducing of lifespan by appearance of pitting on their surface and the degradation of the lubricant. In a hydrodynamic journal bearing, the zone of minimum film thickness, load-carrying oil film varies along the circumference of a bearing through its length. This has been found to form a capacitor of varying capacitance between the journal and the bearings dependent on permittivity of the lubricant used, the bearing length, the eccentricity ratio and the clearance ratio. Besides this, load-carrying on oil film offers resistance that depends on operating parameters and resistivity of the lubricant.

  16. 49 CFR 230.103 - Tender roller bearing journal boxes.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 4 2010-10-01 2010-10-01 false Tender roller bearing journal boxes. 230.103... Locomotives and Tenders Running Gear § 230.103 Tender roller bearing journal boxes. Tender roller bearing journal boxes shall be maintained in a safe and suitable condition. ...

  17. Force and stiffness characteristics of superconducting bearing prototype

    International Nuclear Information System (INIS)

    Matveev, V.; Nizhelskiy, N.; Poluschenko, O.

    2004-01-01

    The radial-axial superconducting bearing prototype was designed, fabricated and tested. The YBaCuO high-temperature superconducting (HTS) monodomain disks diameter 28 mm and thickness of h = 4; 6; 8; 10 mm, capable to trap magnetic field 1 T, were fabricated to be employed in bearing prototype. Force interaction of single field cooled HTS disks with NdFeB magnets depending on disk thickness under 1 mm magnet air gap was studied. It was found that the increase in disk thickness results in reducing radial stiffness and in growing axial one. The results obtained were used for optimization of HTS-PM arrangement, and for developing the bearing design. The designed bearing incorporates a rotor with 7 HTS disks of 4 mm thickness, total mass 90 g, and stator with two pairs of permanent annular magnets of NdFeB. It is established that the force-displacement dependencies of the bearing have three zones: non-hysteresis (elastic) zone with high stiffness up to 560 N/mm; zone of elastic interaction with stiffness 190 N/mm; hysteretic zone with stiffness 150 N/mm in which a rotor residual displacement being observed after unloading. The outer bearing diameter is 130 mm, thickness 30 mm, and mass 1.8 kg. The maximal radial load capacity of the bearing is 190 N at the rotor displacement of 1.3 mm, and the maximal axial load capacity is 85 N at the displacement of 1 mm

  18. Parent and Adolescent Reports of Parenting When a Parent Has a History of Depression: Associations with Observations of Parenting

    OpenAIRE

    Parent, Justin; Forehand, Rex; Dunbar, Jennifer P.; Watson, Kelly H.; Reising, Michelle M.; Seehuus, Martin; Compas, Bruce E.

    2014-01-01

    The current study examined the congruence of parent and adolescent reports of positive and negative parenting with observations of parent-adolescent interactions as the criterion measure. The role of parent and adolescent depressive symptoms in moderating the associations between adolescent or parent report and observations of parenting also was examined. Participants were 180 parents (88.9% female) with a history of clinical depression and one of their 9-to-15 year old children (49.4% female...

  19. Long-term improvements in oral communication skills and quality of peer relations in children with cochlear implants: parental testimony.

    Science.gov (United States)

    Bat-Chava, Y; Martin, D; Imperatore, L

    2014-11-01

    Few research studies have examined longitudinal improvements in oral communication skills and quality of peer relationships of children with implants. Moreover, although the emerging literature suggests that improvement in social functioning follows improvement in oral communication, it is still unknown what factors enhance or impede the relations between these constructs. Based on parent interviews, the current study examined the long-term improvements in speech and oral language skills and relationships with hearing peers in 19 implanted children. Results demonstrate that on average, children continue to improve in oral communication skills and quality of peer relationships even years after implantation, especially those with initial poorer skills. While oral communication ability and quality of peer relationships are strongly associated at each time point, gains in these two variables are associated only for some of the children. Other factors, including self-confidence and peer acceptance, seem to moderate this relationship. Qualitative data are presented to illustrate these relations among variables and to assist in theory building. The results highlight the need for more specific examination of various developmental periods in combination with the progress of oral communication and peer relationships among children with implants. © 2013 John Wiley & Sons Ltd.

  20. Biomechanical consequences of rapid evolution in the polar bear lineage.

    Science.gov (United States)

    Slater, Graham J; Figueirido, Borja; Louis, Leeann; Yang, Paul; Van Valkenburgh, Blaire

    2010-11-05

    The polar bear is the only living ursid with a fully carnivorous diet. Despite a number of well-documented craniodental adaptations for a diet of seal flesh and blubber, molecular and paleontological data indicate that this morphologically distinct species evolved less than a million years ago from the omnivorous brown bear. To better understand the evolution of this dietary specialization, we used phylogenetic tests to estimate the rate of morphological specialization in polar bears. We then used finite element analysis (FEA) to compare the limits of feeding performance in the polar bear skull to that of the phylogenetically and geographically close brown bear. Results indicate that extremely rapid evolution of semi-aquatic adaptations and dietary specialization in the polar bear lineage produced a cranial morphology that is weaker than that of brown bears and less suited to processing tough omnivorous or herbivorous diets. Our results suggest that continuation of current climate trends could affect polar bears by not only eliminating their primary food source, but also through competition with northward advancing, generalized brown populations for resources that they are ill-equipped to utilize.