WorldWideScience

Sample records for parent vessel preservation

  1. Petrous internal carotid aneurysm causing epistaxis: Balloon embolization with preservation of the parent vessel

    Energy Technology Data Exchange (ETDEWEB)

    Willinsky, R.; Lasjaunias, P.; Pruvost, P.; Boucherat, M.

    1987-11-01

    A patient with severe, recurrent posterior epistaxis was shown at angiography to have an aneurysm of the petrous portion of the internal carotid artery (ICA). Since childhood, she had had pain related to eustachian tube blockage by the aneurysm. An endovascular balloon embolization of the aneurysm was successful with preservation of the parent artery. The treatment resulted in resolution of the symptoms. The report confirms the usefulness of an angiographic protocol in evaluating vascular problems.

  2. Petrous internal carotid aneurysm causing epistaxis: Balloon embolization with preservation of the parent vessel

    International Nuclear Information System (INIS)

    Willinsky, R.; Lasjaunias, P.; Pruvost, P.

    1987-01-01

    A patient with severe, recurrent posterior epistaxis was shown at angiography to have an aneurysm of the petrous portion of the internal carotid artery (ICA). Since childhood, she had had pain related to eustachian tube blockage by the aneurysm. An endovascular balloon embolization of the aneurysm was successful with preservation of the parent artery. The treatment resulted in resolution of the symptoms. The report confirms the usefulness of an angiographic protocol in evaluating vascular problems. (orig.)

  3. Transportable, small high-pressure preservation vessel for cells

    International Nuclear Information System (INIS)

    Kamimura, N; Sotome, S; Shimizu, A; Nakajima, K; Yoshimura, Y

    2010-01-01

    We have previously reported that the survival rate of astrocytes increases under high-pressure conditions at 4 0 C. However, pressure vessels generally have numerous problems for use in cell preservation and transportation: (1) they cannot be readily separated from the pressurizing pump in the pressurized state; (2) they are typically heavy and expensive due the use of materials such as stainless steel; and (3) it is difficult to regulate pressurization rate with hand pumps. Therefore, we developed a transportable high-pressure system suitable for cell preservation under high-pressure conditions. This high-pressure vessel has the following characteristics: (1) it can be easily separated from the pressurizing pump due to the use of a cock-type stop valve; (2) it is small and compact, is made of PEEK and weighs less than 200 g; and (3) pressurization rate is regulated by an electric pump instead of a hand pump. Using this transportable high-pressure vessel for cell preservation, we found that astrocytes can survive for 4 days at 1.6 MPa and 4 0 C.

  4. Pancreaticoduodenectomy after esophageal and gastric surgery preserving right gastroepiploic vessels.

    Science.gov (United States)

    Ikeda, Mami; Hasegawa, Kiyoshi; Akamatsu, Nobuhisa; Minagawa, Masami; Imamura, Hiroshi; Sugawara, Yasuhiko; Kokudo, Norihiro; Makuuchi, Masatoshi

    2006-02-01

    Secondary pancreaticoduodenectomy was performed in 2 patients, 1 who had undergone proximal gastrectomy for a gastric carcinoma and 1 who had undergone subtotal esophagectomy with stomach tube reconstruction for an inferior thoracic esophageal carcinoma. To prevent ischemia and congestion of the remnant stomach, the inflow and outflow pathways to the stomach, such as the right gastroepiploic artery and vein, were preserved. In this article, we describe the preservation procedures and discuss the problems of the secondary abdominal surgical procedure.

  5. Suture retraction technique to prevent parent vessel obstruction following aneurysm tandem clipping.

    Science.gov (United States)

    Rayan, Tarek; Amin-Hanjani, Sepideh

    2015-08-01

    With large or giant aneurysms, the use of multiple tandem clips can be essential for complete obliteration of the aneurysm. One potential disadvantage, however, is the considerable cumulative weight of these clips, which may lead to kinking of the underlying parent vessels and obstruction of flow. The authors describe a simple technique to address this problem, guided by intraoperative blood flow measurements, in a patient with a ruptured near-giant 2.2 × 1.7-cm middle cerebral artery bifurcation aneurysm that was treated with the tandem clipping technique. A total of 11 clips were applied in a vertical stacked fashion. The cumulative weight of the clips caused kinking of the temporal M2 branch of the bifurcation with reduction of flow. A 4-0 Nurolon suture tie was applied to the hub of one of the clips and was tethered to the dura of the sphenoid ridge by a small mini-clip and reinforced by application of tissue sealant. The patient underwent intraoperative indocyanine green videoangiography as well as catheter angiography, which demonstrated complete aneurysmal obliteration and preservation of vessel branches. Postoperative angiography confirmed patency of the bifurcation vessels with mild vasospasm. The patient had a full recovery with no postoperative complications and was neurologically intact at her 6-month follow-up. The suture retraction technique allows a simple solution to parent vessel obstruction following aneurysm tandem clipping, in conjunction with the essential guidance provided by intraoperative flow measurements.

  6. Spleen and splenic vessel preserving distal pancreatectomy for bifocal PNET in a young patient with MEN1.

    Science.gov (United States)

    Conrad, Claudius; Schwarz, Lilian; Perrier, Nancy; Fleming, Jason B; Katz, Matthew H G; Aloia, Thomas A; Vauthey, Jean-Nicolas; Lee, Jeffrey E

    2016-10-01

    MEN1 patients requiring resection of neuroendocrine tumors (pNET) are frequently young, active patients in whom a minimal access approach minimizes perioperative morbidity and splenic preservation decreases the risk of post-splenectomy sepsis. Laparoscopic spleen preserving distal pancreatectomy can be performed with removal (Warshaw's technique) or preservation of the splenic vessels, the later having a higher rate of successful splenic preservation. This is an active, 16-year-old Jehovah's Witness with trifocal nonfunctioning neuroendocrine tumor in the proximal body and tail of the pancreas as part of MEN1 syndrome. A spleen preserving distal pancreatectomy was performed with the final pathology showing three pNET with low mitotic count and three lymph nodes free of cancer (final stage pT2pN0). This video demonstrates patient and trocar positioning as well as operative tactics for a laparoscopic distal pancreatectomy with preservation of splenic vessels. Intraoperative ultrasound is crucial in assessing pNETs' relation to critical vessels, pancreatic duct, and to exclude synchronous lesions. The video focuses on safe laparoscopic creation of the retropancreatic tunnel and dissecting the pancreas off the splenic vessels using novel energy devises to control direct splenic venous branches into the pancreas. Improvements in laparoscopic techniques and technology have enabled surgeons to preserve the major splenic vessels to avoid splenic infarcts, abscesses and re-operations, and minimize the risk of left-sided portal hypertension. Splenic preservation is particularly important in young MEN1 patients undergoing laparoscopic pancreatectomy for pNET due to the increased risk of overwhelming post-splenectomy sepsis.

  7. Re-expression of pro-fibrotic, embryonic preserved mediators in irradiated arterial vessels of the head and neck region.

    Science.gov (United States)

    Möbius, Patrick; Preidl, Raimund H M; Weber, Manuel; Amann, Kerstin; Neukam, Friedrich W; Wehrhan, Falk

    2017-11-01

    Surgical treatment of head and neck malignancies frequently includes microvascular free tissue transfer. Preoperative radiotherapy increases postoperative fibrosis-related complications up to transplant loss. Fibrogenesis is associated with re-expression of embryonic preserved tissue developmental mediators: osteopontin (OPN), regulated by sex-determining region Y‑box 9 (Sox9), and homeobox A9 (HoxA9) play important roles in pathologic tissue remodeling and are upregulated in atherosclerotic vascular lesions; dickkopf-1 (DKK1) inhibits pro-fibrotic and atherogenic Wnt signaling. We evaluated the influence of irradiation on expression of these mediators in arteries of the head and neck region. DKK1, HoxA9, OPN, and Sox9 expression was examined immunohistochemically in 24 irradiated and 24 nonirradiated arteries of the lower head and neck region. The ratio of positive cells to total cell number (labeling index) in the investigated vessel walls was assessed semiquantitatively. DKK1 expression was significantly decreased, whereas HoxA9, OPN, and Sox9 expression were significantly increased in irradiated compared to nonirradiated arterial vessels. Preoperative radiotherapy induces re-expression of embryonic preserved mediators in arterial vessels and may thus contribute to enhanced activation of pro-fibrotic downstream signaling leading to media hypertrophy and intima degeneration comparable to fibrotic development steps in atherosclerosis. These histopathological changes may be promoted by HoxA9-, OPN-, and Sox9-related inflammation and vascular remodeling, supported by downregulation of anti-fibrotic DKK1. Future pharmaceutical strategies targeting these vessel alterations, e. g., bisphosphonates, might reduce postoperative complications in free tissue transfer.

  8. Stent-assisted coil embolization of aneurysms with small parent vessels: safety and efficacy analysis.

    Science.gov (United States)

    Kühn, Anna Luisa; Hou, Samuel Y; Puri, Ajit S; Silva, Christine F; Gounis, Matthew J; Wakhloo, Ajay K

    2016-06-01

    Stent-assisted coil embolization (SACE) is a viable therapeutic approach for wide-neck intracranial aneurysms. However, it can be technically challenging in small cerebral vessels (≤2 mm). To present our experience with stents approved for SACE in aneurysms with small parent arteries. All patients who underwent stent-assisted aneurysm treatment with either a Neuroform or an Enterprise stent device at our institution between June 2006 and October 2012 were identified. Additionally, we evaluated each patient's vascular risk factors, aneurysm characteristics (ruptured vs non-ruptured, incidental finding, recanalized) and follow-up angiography data. A total of 41 patients with 44 aneurysms met our criteria, including 31 women and 10 men. Most of the aneurysms were located in the anterior circulation (75%). Stent placement in vessels 1.2-2 mm in diameter was successful in 93.2%. Thromboembolic complications occurred in 6 cases and vessel straightening was seen in 1 case only. Initial nearly complete to complete aneurysm obliteration was achieved in 88.6%. Six-month follow-up angiography showed coil compaction in three cases, one asymptomatic in-stent stenosis and stent occlusion. Twelve to 20-months' follow-up showed stable coil compaction in two patients compared with previous follow-up, and aneurysm recanalization in two patients. Twenty-four to 36-months' follow-up showed further coil compaction in one of these patients and aneurysm recanalization in a previous case of stable coil compaction on mid-term follow-up. Our results suggest that SACE of aneurysms with small parent vessels is feasible in selected cases and shows good long-term patency rates of parent arteries. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

  9. The potential role of perivascular lymphatic vessels in preservation of kidney allograft function.

    Science.gov (United States)

    Tsuchimoto, Akihiro; Nakano, Toshiaki; Hasegawa, Shoko; Masutani, Kosuke; Matsukuma, Yuta; Eriguchi, Masahiro; Nagata, Masaharu; Nishiki, Takehiro; Kitada, Hidehisa; Tanaka, Masao; Kitazono, Takanari; Tsuruya, Kazuhiko

    2017-08-01

    Lymphangiogenesis occurs in diseased native kidneys and kidney allografts, and correlates with histological injury; however, the clinical significance of lymphatic vessels in kidney allografts is unclear. This study retrospectively reviewed 63 kidney transplant patients who underwent protocol biopsies. Lymphatic vessels were identified by immunohistochemical staining for podoplanin, and were classified according to their location as perivascular or interstitial lymphatic vessels. The associations between perivascular lymphatic density and kidney allograft function and pathological findings were analyzed. There were no significant differences in perivascular lymphatic densities in kidney allograft biopsy specimens obtained at 0 h, 3 months and 12 months. The groups with higher perivascular lymphatic density showed a lower proportion of progression of interstitial fibrosis/tubular atrophy grade from 3 to 12 months (P for trend = 0.039). Perivascular lymphatic density was significantly associated with annual decline of estimated glomerular filtration rate after 12 months (r = -0.31, P = 0.017), even after adjusting for multiple confounders (standardized β = -0.30, P = 0.019). High perivascular lymphatic density is associated with favourable kidney allograft function. The perivascular lymphatic network may be involved in inhibition of allograft fibrosis and stabilization of graft function.

  10. Re-expression of pro-fibrotic, embryonic preserved mediators in irradiated arterial vessels of the head and neck region

    Energy Technology Data Exchange (ETDEWEB)

    Moebius, Patrick; Preidl, Raimund H.M.; Weber, Manuel; Neukam, Friedrich W.; Wehrhan, Falk [Friedrich-Alexander-Universitaet Erlangen-Nuernberg (FAU), Department of Oral and Maxillofacial Surgery, University Hospital of Erlangen, Erlangen (Germany); Amann, Kerstin [Friedrich-Alexander-Universitaet Erlangen-Nuernberg (FAU), Department of Nephropathology, Institute of Pathology, University Hospital of Erlangen, Erlangen (Germany)

    2017-11-15

    Surgical treatment of head and neck malignancies frequently includes microvascular free tissue transfer. Preoperative radiotherapy increases postoperative fibrosis-related complications up to transplant loss. Fibrogenesis is associated with re-expression of embryonic preserved tissue developmental mediators: osteopontin (OPN), regulated by sex-determining region Y-box 9 (Sox9), and homeobox A9 (HoxA9) play important roles in pathologic tissue remodeling and are upregulated in atherosclerotic vascular lesions; dickkopf-1 (DKK1) inhibits pro-fibrotic and atherogenic Wnt signaling. We evaluated the influence of irradiation on expression of these mediators in arteries of the head and neck region. DKK1, HoxA9, OPN, and Sox9 expression was examined immunohistochemically in 24 irradiated and 24 nonirradiated arteries of the lower head and neck region. The ratio of positive cells to total cell number (labeling index) in the investigated vessel walls was assessed semiquantitatively. DKK1 expression was significantly decreased, whereas HoxA9, OPN, and Sox9 expression were significantly increased in irradiated compared to nonirradiated arterial vessels. Preoperative radiotherapy induces re-expression of embryonic preserved mediators in arterial vessels and may thus contribute to enhanced activation of pro-fibrotic downstream signaling leading to media hypertrophy and intima degeneration comparable to fibrotic development steps in atherosclerosis. These histopathological changes may be promoted by HoxA9-, OPN-, and Sox9-related inflammation and vascular remodeling, supported by downregulation of anti-fibrotic DKK1. Future pharmaceutical strategies targeting these vessel alterations, e. g., bisphosphonates, might reduce postoperative complications in free tissue transfer. (orig.) [German] Die operative Behandlung von Tumoren im Kopf- und Halsbereich umfasst den Transfer mikrovaskulaerer Gewebetransplantate. Praeoperative Bestrahlung verursacht eine erhoehte Inzidenz

  11. Fertility preservation in the male pediatric population: factors influencing the decision of parents and children.

    Science.gov (United States)

    Wyns, C; Collienne, C; Shenfield, F; Robert, A; Laurent, P; Roegiers, L; Brichard, B

    2015-09-01

    How can the decision process for fertility preservation (FP) in adolescents and prepubertal boys be improved based on patient and parent feelings about FP counseling? The content of information given to patients and parents and hope for future parenthood appeared to positively impact on the decision to preserve fertility in the pediatric population and, therefore, deserves special attention to improve FP care. A vast body of literature on adult cancer patients shows that reproductive capacity is a major quality-of-life issue. Patients also have a strong desire to be informed of available FP options with a view to future parenthood of their own genetic child, considering that parents were able to make an informed and voluntary decision for their prepubertal sons despite the heavy emotional burden at the time of diagnosis, there is so far very limited information on patient expectations regarding FP. A lack of awareness often equates to suboptimal care by oncologists and FP specialists, and poor access to FP, therefore improving knowledge and identifying the expectations of pediatric patients and their parents are crucial for optimizing multidisciplinary collaborative care pathways (MCCPs), including counseling and access to FP methods, in the youngest population. A questionnaire survey was posted to an eligible population between May 2005 and May 2013. A total of 348 prepubertal boys and adolescents aged 0-18 years, diagnosed with cancer in a university hospital setting, were eligible. Three different questionnaires for two age groups of children (parents were established based on information from focus groups. Questions were subsequently reviewed by the institutional ethics board before being sent. Of the 348 eligible patients, 44 died and 14 were lost to follow-up. Thus, 290 patients (77 aged 12-18 years and 213 aged questionnaire. In total, 120 questionnaires were recovered, 45.5% (n = 35/77) from adolescents and 39.9% (n = 85/213) from children. FP acceptance

  12. Preserving children's fertility: two tales about children's right to an open future and the margins of parental obligations.

    Science.gov (United States)

    Cutas, Daniela; Hens, Kristien

    2015-05-01

    The sources, extent and margins of parental obligations in taking decisions regarding their children's medical care are subjects of ongoing debates. Balancing children's immediate welfare with keeping their future open is a delicate task. In this paper, we briefly present two examples of situations in which parents may be confronted with the choice of whether to authorise or demand non-therapeutic interventions on their children for the purpose of fertility preservation. The first example is that of children facing cancer treatment, and the second of children with Klinefelter syndrome. We argue that, whereas decisions of whether to preserve fertility may be prima facie within the limits of parental discretion, the right to an open future does not straightforwardly put parents under an obligation to take actions that would detect or relieve future infertility in their children-and indeed in some cases taking such actions is problematic.

  13. Minimally Invasive Approach for Spleen-Preserving Distal Pancreatectomy: a Comparative Analysis of Postoperative Complication Between Splenic Vessel Conserving and Warshaw's Technique.

    Science.gov (United States)

    Lee, Lip Seng; Hwang, Ho Kyoung; Kang, Chang Moo; Lee, Woo Jung

    2016-08-01

    Spleen-preserving distal pancreatectomy with Warshaw's technique (WT) was reported to have higher spleen-related complication. The aim of this study was to evaluate the postoperative complication between the splenic vessel-conserving technique (SVC) and the WT when they were performed by the minimally invasive approach. From January 2006 to June 2015, data of the patients who had laparoscopic or robotic-assisted spleen-preserving distal pancreatectomy for benign or borderline malignant tumors were retrospectively reviewed. Patients were divided into SVC and the WT group for comparison. Of the 89 patients who had the spleen-preserving distal pancreatectomy, 63 were SVC, whereas 26 were WT. The CT scans showed that patients who had WT were found to have higher rate of splenic infarction (P < 0.001) and had significantly higher rate of collateral vessel formation at 1 year (P < 0.001). All the splenic infarctions were low grade and asymptomatic which resolved spontaneously. None of the patients with collateral formation experienced gastrointestinal bleeding. The postoperative complication of SVC and WT did not differ significantly. SVC and WT were found to have comparable outcome. Both techniques can be used to achieve higher spleen-preserving rate.

  14. Minilaparoscopic varicocelectomy with preservation of testicular artery and lymphatic vessels by using intracorporeal knot-tying technique: five-year experience.

    Science.gov (United States)

    Chung, Shiu-Dong; Wu, Chia-Chang; Lin, Victor Chia-Hsiang; Ho, Chen-Hsun; Yang, Stephen Shei Dei; Tsai, Yao-Chou

    2011-08-01

    In this study we present our experience using minilaparoscopic intracorporeal knot tying to ligate internal spermatic veins (ISV) while sparing the spermatic artery and lymphatics. Minilaparoscopic varicocelectomies were performed in 87 patients between January 2004 and January 2009. All varicoceles were detected clinically according to the World Health Organization (WHO) classification and confirmed by scrotal color Doppler ultrasonography. The surgical indications were scrotal symptoms in 71, infertility in 16, and both conditions in 2. Three 3.5 mm minilaparoscopic ports were used for the operation. The ISVs were dissected and then ligated with intracorporeal knot-tying. The testicular artery and lymphatic vessels were carefully preserved to minimize procedure-related complications. Unilateral laparoscopic varicocelectomy was performed in 21 (24.2%) patients and bilateral in 66 (75.8%). Mean operative time was 71.1 ± 29.2 and 46.8 ± 12.6 min for bilateral and unilateral varicocelectomies, respectively. All patients were discharged within 24 h after surgery. Neither immediate major nor late procedure-related complications were noted. Of the 71 patients with scrotal symptoms, the symptoms completely subsided in 55 (77.5%) and partially subsided in 10 (14.1%). Only one (1.2%) recurrent varicocele was detected within a mean follow-up of 21 months (range = 3-42). Neither hydrocele formation nor testicular atrophy was found during the follow-up period. Our 5-year experience revealed that minilaparoscopic varicocelectomy with sparing of artery and lymphatic vessels could safely and effectively ligate all spermatic veins and preserve spermatic arteries and lymphatic channels without leading to a high varicocele persistence or recurrence.

  15. Parental attitudes toward fertility preservation in boys with cancer: context of different risk levels of infertility and success rates of fertility restoration

    NARCIS (Netherlands)

    Sadri-Ardekani, Hooman; Akhondi, Mohammad-Mehdi; Vossough, Parvaneh; Maleki, Haleh; Sedighnejad, Shirin; Kamali, Koorosh; Ghorbani, Behzad; van Wely, Madelon; van der Veen, Fulco; Repping, Sjoerd

    2013-01-01

    To measure the parental attitudes toward fertility preservation in boys with cancer. Retrospective cohort study. Questionnaire survey via regular mail. A total of 465 families whose sons were already treated for cancer. The questionnaire was designed for two groups based on child's age at the time

  16. Parenting

    Science.gov (United States)

    ... parents, people are always ready to offer advice. Parenting tips, parents' survival guides, dos, don'ts, shoulds ... right" way to be a good parent. Good parenting includes Keeping your child safe Showing affection and ...

  17. A new approach to study of seabird-fishery overlap: Connecting chick feeding with parental foraging and overlap with fishing vessels

    Directory of Open Access Journals (Sweden)

    Junichi Sugishita

    2015-07-01

    Full Text Available Incidental fisheries bycatch is recognised as a major threat to albatross populations worldwide. However, fishery discards and offal produced in large quantities might benefit some scavenging seabirds. Here, we demonstrate an integrated approach to better understand the ecological ramifications of fine-scale overlap between seabirds and fisheries. As a case study, we examined whether foraging in association with a fishing vessel is advantageous for chick provisioning in terms of quantity of food delivered to chicks, in northern royal albatross (Diomedea sanfordi at Taiaroa Head, New Zealand. Fine-scale overlap between albatrosses and vessels was quantified by integrating GPS tracking and Vessel Monitoring Systems (VMS. Meal size delivered to chicks was measured using custom-designed nest balances, and monitoring of attendance of adults fitted with radio transmitters was used in conjunction with time-lapse photography at the nest allowed us to allocate each feeding event to a specific parent. The combination of these techniques enabled comparison of meal sizes delivered to chicks with parental foraging trip durations with or without fishing vessels association. A total of 45 foraging trips and associated chick feeding events were monitored during the chick-rearing period in 2012. Differences in the meal size and foraging trip duration relative to foraging overlap with fisheries were examined using a linear mixed-effect model, adjusted for chick age. Our results, based on three birds, suggest that foraging in association with vessels does not confer an advantage for chick feeding for this population that demonstrated low rates of overlap while foraging. The integrated research design presented can be applied to other seabird species that are susceptible to bycatch, and offers a valuable approach to evaluate habitat quality by linking habitat use and foraging success in terms of total amount of food delivered to offspring.

  18. Vessel Operating Units (Vessels)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains data for vessels that are greater than five net tons and have a current US Coast Guard documentation number. Beginning in1979, the NMFS...

  19. Survey of Third-Party Parenting Options Associated With Fertility Preservation Available to Patients With Cancer Around the Globe

    Directory of Open Access Journals (Sweden)

    Alexandra S. Rashedi

    2017-06-01

    Full Text Available Purpose: In the accompanying article, “Analysis of Fertility Preservation Options Available to Patients With Cancer Around the Globe,” we showed that specific fertility preservation services may not be offered at various sites around the world because of cultural and legal barriers. We assessed global and regional experiences as well as the legal status of third-party reproduction and adoption to serve as a comprehensive international data set and resource for groups that wish to begin oncofertility interventions. Methods: We provide data on the legalities of third-party assisted reproductive technologies and other family-building options in the 28 oncofertility-practicing countries surveyed. Results: We found regional and country differences that will be important in the development of tailored resources for physicians and for patient brochures that are sensitive to these local restrictions and cultural norms. Conclusion: Because many patients first consult Web-based materials, the formal assessment of the availability of these options provides members of the global oncofertility community with data to which they might otherwise not have ready access to better serve their patients.

  20. Parents.

    Science.gov (United States)

    Hurst, Hunter, Ed.; And Others

    1986-01-01

    This document contains the fifth volume of "Today's Delinquent," an annual publication of the National Center for Juvenile Justice. This volume deals with the issue of the family and delinquency, examining the impact of parental behavior on the production of delinquent behavior. "Parents: Neglectful and Neglected" (Laurence D. Steinberg) posits…

  1. Prevalence and Predictors of Sperm Banking in Adolescents Newly Diagnosed With Cancer: Examination of Adolescent, Parent, and Provider Factors Influencing Fertility Preservation Outcomes.

    Science.gov (United States)

    Klosky, James L; Wang, Fang; Russell, Kathryn M; Zhang, Hui; Flynn, Jessica S; Huang, Lu; Wasilewski-Masker, Karen; Landier, Wendy; Leonard, Marcia; Albritton, Karen H; Gupta, Abha A; Casillas, Jacqueline; Colte, Paul; Kutteh, William H; Schover, Leslie R

    2017-12-01

    Purpose To estimate the prevalence of sperm banking among adolescent males newly diagnosed with cancer and to identify factors associated with banking outcomes. Patients and Methods A prospective, single-group, observational study design was used to test the contribution of sociodemographic, medical, psychological/health belief, communication, and developmental factors to fertility preservation outcomes. At-risk adolescent males (N = 146; age 13.00 to 21.99 years; Tanner stage ≥ 3), their parents, and medical providers from eight leading pediatric oncology centers across the United States and Canada completed self-report questionnaires within 1 week of treatment initiation. Multivariable logistic regression was used to calculate odds ratios (ORs) and 95% CIs for specified banking outcomes (collection attempt v no attempt and successful completion of banking v no banking). Results Among adolescents (mean age, 16.49 years; standard deviation, 2.02 years), 53.4% (78 of 146) made a collection attempt, with 43.8% (64 of 146) successfully banking sperm (82.1% of attempters). The overall attempt model revealed adolescent consultation with a fertility specialist (OR, 29.96; 95% CI, 2.48 to 361.41; P = .007), parent recommendation to bank (OR, 12.30; 95% CI, 2.01 to 75.94; P = .007), and higher Tanner stage (OR, 5.42; 95% CI, 1.75 to 16.78; P = .003) were associated with an increased likelihood of a collection attempt. Adolescent history of masturbation (OR, 5.99; 95% CI, 1.25 to 28.50; P = .025), banking self-efficacy (OR, 1.23; 95% CI, 1.05 to 1.45; P = .012), and parent (OR, 4.62; 95% CI, 1.46 to 14.73; P = .010) or medical team (OR, 4.26; 95% CI, 1.45 to 12.43; P = .008) recommendation to bank were associated with increased likelihood of sperm banking completion. Conclusion Although findings suggest that banking is underutilized, modifiable adolescent, parent, and provider factors associated with banking outcomes were identified and should be targeted in future

  2. An automated vessel segmentation of retinal images using multiscale vesselness

    International Nuclear Information System (INIS)

    Ben Abdallah, M.; Malek, J.; Tourki, R.; Krissian, K.

    2011-01-01

    The ocular fundus image can provide information on pathological changes caused by local ocular diseases and early signs of certain systemic diseases, such as diabetes and hypertension. Automated analysis and interpretation of fundus images has become a necessary and important diagnostic procedure in ophthalmology. The extraction of blood vessels from retinal images is an important and challenging task in medical analysis and diagnosis. In this paper, we introduce an implementation of the anisotropic diffusion which allows reducing the noise and better preserving small structures like vessels in 2D images. A vessel detection filter, based on a multi-scale vesselness function, is then applied to enhance vascular structures.

  3. Research vessels

    Digital Repository Service at National Institute of Oceanography (India)

    Rao, P.S.

    The role of the research vessels as a tool for marine research and exploration is very important. Technical requirements of a suitable vessel and the laboratories needed on board are discussed. The history and the research work carried out...

  4. Fertility Preservation for Children Diagnosed with Cancer

    Medline Plus

    Full Text Available ... Cancer Ask Your Doctor Information for Patients Many adult survivors of childhood cancer feel fertility preservation and ... Fertility preservation and adolescent cancer patients: lessons from adult survivors of childhood cancer and their parents. Cancer ...

  5. Wood preservation

    Science.gov (United States)

    Kevin Archer; Stan Lebow

    2006-01-01

    Wood preservation can be interpreted to mean protection from fire, chemical degradation, mechanical wear, weathering, as well as biological attack. In this chapter, the term preservation is applied more restrictively to protection from biological hazards.

  6. Software preservation

    Directory of Open Access Journals (Sweden)

    Tadej Vodopivec

    2011-01-01

    Full Text Available Comtrade Ltd. covers a wide range of activities related to information and communication technologies; its deliverables include web applications, locally installed programs,system software, drivers, embedded software (used e.g. in medical devices, auto parts,communication switchboards. Also the extensive knowledge and practical experience about digital long-term preservation technologies have been acquired. This wide spectrum of activities puts us in the position to discuss the often overlooked aspect of the digital preservation - preservation of software programs. There are many resources dedicated to digital preservation of digital data, documents and multimedia records,but not so many about how to preserve the functionalities and features of computer programs. Exactly these functionalities - dynamic response to inputs - render the computer programs rich compared to documents or linear multimedia. The article opens the questions on the beginning of the way to the permanent digital preservation. The purpose is to find a way in the right direction, where all relevant aspects will be covered in proper balance. The following questions are asked: why at all to preserve computer programs permanently, who should do this and for whom, when we should think about permanent program preservation, what should be persevered (such as source code, screenshots, documentation, and social context of the program - e.g. media response to it ..., where and how? To illustrate the theoretic concepts given the idea of virtual national museum of electronic banking is also presented.

  7. Digital preservation

    CERN Document Server

    Deegan, Marilyn

    2013-01-01

    Digital preservation is an issue of huge importance to the library and information profession right now. With the widescale adoption of the internet and the rise of the world wide web, the world has been overwhelmed by digital information. Digital data is being produced on a massive scale by individuals and institutions: some of it is born, lives and dies only in digital form, and it is the potential death of this data, with its impact on the preservation of culture, that is the concern of this book. So how can information professionals try to remedy this? Digital preservation is a complex iss

  8. Urine Preservative

    Science.gov (United States)

    Smith, Scott M. (Inventor); Nillen, Jeannie (Inventor)

    2001-01-01

    Disclosed is CPG, a combination of a chlorhexidine salt (such as chlorhexidine digluconate, chlorhexidine diacetate, or chlorhexidine dichloride) and n-propyl gallate that can be used at ambient temperatures as a urine preservative.

  9. Containment vessel

    International Nuclear Information System (INIS)

    Zbirohowski-Koscia, K.F.; Roberts, A.C.

    1980-01-01

    A concrete containment vessel for nuclear reactors is disclosed that is spherical and that has prestressing tendons disposed in first, second and third sets, the tendons of each set being all substantially concentric and centred around a respective one of the three orthogonal axes of the sphere; the tendons of the first set being anchored at each end at a first anchor rib running around a circumference of the vessel, the tendons of the second set being anchored at each end at a second anchor rib running around a circumference of the sphere and disposed at 90 0 to the first rib, and the tendons of the third set being anchored some to the first rib and the remainder to the second rib. (author)

  10. Emittance preservation

    Energy Technology Data Exchange (ETDEWEB)

    Kain, V; Arduini, G; Goddard, B; Holzer, B J; Jowett, J M; Meddahi, M; Mertens, T; Roncarolo, F; Schaumann, M; Versteegen, R; Wenninger, J [European Organization for Nuclear Research, Geneva (Switzerland)

    2012-07-01

    Emittance measurements during the LHC proton run 2011 indicated a blow-up of 20 % to 30 % from LHC injection to collisions. This presentation will show the emittance preservation throughout the different parts of the LHC cycle and discuss the current limitations on emittance determination. An overview of emittance preservation through the injector complex as function of bunch intensity will also be given. Possible sources for the observed blow-up and required tests in 2012 will be presented. Possible improvements of emittance diagnostics and analysis tools for 2012 will be shown.

  11. Salvage Stories, Preserving Narratives, and Museum Ships

    OpenAIRE

    Andrew Sawyer

    2013-01-01

    Preserved ships and other vessels are associated with a historiography, in Europe at least, which is still marked by parochialism, antiquarianism, and celebratory narrative. Many evidence difficult histories, and they are also extremely expensive to preserve. Yet, they are clearly valued, as nations in Europe invest heavily in them. This survey examines a range of European examples as sites of cultural, political and national identity. An analytical framework foregrounding the role of narrati...

  12. Vessel Operator System

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Operator cards are required for any operator of a charter/party boat and or a commercial vessel (including carrier and processor vessels) issued a vessel permit from...

  13. Fertility preservation in Turner syndrome.

    Science.gov (United States)

    Grynberg, Michaël; Bidet, Maud; Benard, Julie; Poulain, Marine; Sonigo, Charlotte; Cédrin-Durnerin, Isabelle; Polak, Michel

    2016-01-01

    Premature ovarian insufficiency is a relatively rare condition that can appear early in life. In a non-negligible number of cases the ovarian dysfunction results from genetic diseases. Turner syndrome (TS), the most common sex chromosome abnormality in females, is associated with an inevitable premature exhaustion of the follicular stockpile. The possible or probable infertility is a major concern for TS patients and their parents, and physicians are often asked about possible options to preserve fertility. Unfortunately, there are no recommendations on fertility preservation in this group. The severely reduced follicle pool even during prepubertal life represents the major limit for fertility preservation and is the root of numerous questions regarding the competence of gametes or ovarian tissue crybanked. In addition, patients suffering from TS show higher than usual rates of spontaneous abortion, fetal anomaly, and maternal morbidity and mortality, which should be considered at the time of fertility preservation and before reutilization of the cryopreserved gametes. Apart from fulfillment of the desire of becoming genetic parents, TS patients may be potential candidates for egg donation, gestational surrogacy, and adoption. The present review discusses the different options for preserving female fertility in TS and the ethical questions raised by these approaches. Copyright © 2016 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

  14. Multiple shell pressure vessel

    International Nuclear Information System (INIS)

    Wedellsborg, B.W.

    1988-01-01

    A method is described of fabricating a pressure vessel comprising the steps of: attaching a first inner pressure vessel having means defining inlet and outlet openings to a top flange, placing a second inner pressure vessel, having means defining inlet and outlet opening, concentric with and spaced about the first inner pressure vessel and attaching the second inner pressure vessel to the top flange, placing an outer pressure vessel, having inlet and outlet openings, concentric with and spaced apart about the second inner pressure vessel and attaching the outer pressure vessel to the top flange, attaching a generally cylindrical inner inlet conduit and a generally cylindrical inner outlet conduit respectively to the inlet and outlet openings in the first inner pressure vessel, attaching a generally cylindrical outer inlet conduit and a generally cylindrical outer outlet conduit respectively to the inlet and outlet opening in the second inner pressure vessel, heating the assembled pressure vessel to a temperature above the melting point of a material selected from the group, lead, tin, antimony, bismuth, potassium, sodium, boron and mixtures thereof, filling the space between the first inner pressure vessel and the second inner pressure vessel with material selected from the group, filling the space between the second inner pressure vessel and the outer pressure vessel with material selected from the group, and pressurizing the material filling the spaces between the pressure vessels to a predetermined pressure, the step comprising: pressurizing the spaces to a pressure whereby the wall of the first inner pressure vessel is maintained in compression during steady state operation of the pressure vessel

  15. 36 CFR 13.1180 - Closed waters, motor vessels and seaplanes.

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false Closed waters, motor vessels... and Preserve Vessel Operating Restrictions § 13.1180 Closed waters, motor vessels and seaplanes. (a... Hugh Miller Inlet. (4) Waters within the Beardslee Island group (except the Beardslee Entrance), that...

  16. Probabilistic retinal vessel segmentation

    Science.gov (United States)

    Wu, Chang-Hua; Agam, Gady

    2007-03-01

    Optic fundus assessment is widely used for diagnosing vascular and non-vascular pathology. Inspection of the retinal vasculature may reveal hypertension, diabetes, arteriosclerosis, cardiovascular disease and stroke. Due to various imaging conditions retinal images may be degraded. Consequently, the enhancement of such images and vessels in them is an important task with direct clinical applications. We propose a novel technique for vessel enhancement in retinal images that is capable of enhancing vessel junctions in addition to linear vessel segments. This is an extension of vessel filters we have previously developed for vessel enhancement in thoracic CT scans. The proposed approach is based on probabilistic models which can discern vessels and junctions. Evaluation shows the proposed filter is better than several known techniques and is comparable to the state of the art when evaluated on a standard dataset. A ridge-based vessel tracking process is applied on the enhanced image to demonstrate the effectiveness of the enhancement filter.

  17. Improvement to reactor vessel

    International Nuclear Information System (INIS)

    1974-01-01

    The vessel described includes a prestressed concrete vessel containing a chamber and a removable cover closing this chamber. The cover is in concrete and is kept in its closed position by main and auxiliary retainers, comprising fittings integral with the concrete of the vessel. The auxiliary retainers pass through the concrete of the cover. This improvement may be applied to BWR, PWR and LMFBR type reactor vessel [fr

  18. ALICE HMPID Radiator Vessel

    CERN Document Server

    2003-01-01

    View of the radiator vessels of the ALICE/HMPID mounted on the support frame. Each HMPID module is equipped with 3 indipendent radiator vessels made out of neoceram and fused silica (quartz) windows glued together. The spacers inside the vessel are needed to stand the hydrostatic pressure. http://alice-hmpid.web.cern.ch/alice-hmpid

  19. Fertility Preservation for Children Diagnosed with Cancer

    Medline Plus

    Full Text Available ... from adult survivors of childhood cancer and their parents. Cancer Treat Res. 2007;138:201-217. Redig AJ, Brannigan R, Stryker SJ, et al. Incorporating fertility preservation into the care of young oncology patients. Cancer. 2010;117:4- ...

  20. Pressure vessel design manual

    CERN Document Server

    Moss, Dennis R

    2013-01-01

    Pressure vessels are closed containers designed to hold gases or liquids at a pressure substantially different from the ambient pressure. They have a variety of applications in industry, including in oil refineries, nuclear reactors, vehicle airbrake reservoirs, and more. The pressure differential with such vessels is dangerous, and due to the risk of accident and fatality around their use, the design, manufacture, operation and inspection of pressure vessels is regulated by engineering authorities and guided by legal codes and standards. Pressure Vessel Design Manual is a solutions-focused guide to the many problems and technical challenges involved in the design of pressure vessels to match stringent standards and codes. It brings together otherwise scattered information and explanations into one easy-to-use resource to minimize research and take readers from problem to solution in the most direct manner possible. * Covers almost all problems that a working pressure vessel designer can expect to face, with ...

  1. Thermal Behavior of the Reactor Vessel Penetration Under External Vessel Cooling During a Severe Accident

    International Nuclear Information System (INIS)

    Kang, Kyoung-Ho; Park, Rae-Joon; Kim, Jong-Tae; Min, Byung-Tae; Lee, Ki-Young; Kim, Sang-Baik

    2004-01-01

    Experimental and analytical studies on the thermal behavior of reactor vessel penetration have been performed under external vessel cooling during a severe accident in the Korean next-generation reactor APR1400. Two types of tests, SUS-EXT and SUS-DRY with and without external vessel cooling, respectively, have been performed using sustained heating by an induction heater. Three tests have been carried out varying the cooling conditions at the vessel outer surface in the SUS-EXT tests. The experimental results have been thermally estimated using the LILAC computer code. The experimental results indicate that the inner surface of the vessel was ablated by the 45-mm thickness in the SUS-DRY test. Despite the total ablation of the welding material, the penetration was not ejected outside the vessel, which could be attributed to the thermal expansion of the penetration. Unlike the SUS-DRY test, the thickness of the ablation was ∼15 to 20 mm at most, so the welding was preserved in the SUS-EXT tests. It is concluded from the experimental results that the external vessel cooling highly affected the ablation configuration and the thermal behaviors of the vessel and the penetration. An increase in coolant mass flow rate from 0.047 to 0.152 kg/s had effects on the thermal behavior of the lower head vessel and penetration in the SUS-EXT tests. The LILAC analytical results on temperature distribution and ablation depth in the lower head vessel and penetration were very similar to the experimental results

  2. Tumor Blood Vessel Dynamics

    Science.gov (United States)

    Munn, Lance

    2009-11-01

    ``Normalization'' of tumor blood vessels has shown promise to improve the efficacy of chemotherapeutics. In theory, anti-angiogenic drugs targeting endothelial VEGF signaling can improve vessel network structure and function, enhancing the transport of subsequent cytotoxic drugs to cancer cells. In practice, the effects are unpredictable, with varying levels of success. The predominant effects of anti-VEGF therapies are decreased vessel leakiness (hydraulic conductivity), decreased vessel diameters and pruning of the immature vessel network. It is thought that each of these can influence perfusion of the vessel network, inducing flow in regions that were previously sluggish or stagnant. Unfortunately, when anti-VEGF therapies affect vessel structure and function, the changes are dynamic and overlapping in time, and it has been difficult to identify a consistent and predictable normalization ``window'' during which perfusion and subsequent drug delivery is optimal. This is largely due to the non-linearity in the system, and the inability to distinguish the effects of decreased vessel leakiness from those due to network structural changes in clinical trials or animal studies. We have developed a mathematical model to calculate blood flow in complex tumor networks imaged by two-photon microscopy. The model incorporates the necessary and sufficient components for addressing the problem of normalization of tumor vasculature: i) lattice-Boltzmann calculations of the full flow field within the vasculature and within the tissue, ii) diffusion and convection of soluble species such as oxygen or drugs within vessels and the tissue domain, iii) distinct and spatially-resolved vessel hydraulic conductivities and permeabilities for each species, iv) erythrocyte particles advecting in the flow and delivering oxygen with real oxygen release kinetics, v) shear stress-mediated vascular remodeling. This model, guided by multi-parameter intravital imaging of tumor vessel structure

  3. Maury Journals - German Vessels

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — German vessels observations, after the 1853 Brussels Conference that set International Maritime Standards, modeled after Maury Marine Standard Observations.

  4. Home Food Preservation among Families with Young Children

    Science.gov (United States)

    Lorenz, Lorraine J.; Sawicki, Marjorie A.; Elliott, Michael; White, Melissa

    2016-01-01

    The purpose of this study was to determine preservation practices, perceived barriers, and likelihood of parents with young children to home preserve food in the future. Implications of this research relate to family and consumer sciences professionals who endeavor to improve fruit and vegetable intake and provide resources to families and…

  5. Need of Reactor Dosimetry Preservation

    International Nuclear Information System (INIS)

    Ilieva, Krassimira

    2011-01-01

    The nuclear safety requirements and philosophy have changed by the development of new nuclear systems and this imposes special research and development activity. Reactor dosimetry which is applied for determination of neutron field parameters and neutron flux responses in different regions of the reactor system plays an important role in determining of radiation exposure on reactor system elements as reactor vessel, internals, shielding; dose determination for material damage study; for conditioning of irradiation; dose determination for medicine and industry application; induced activity determination for decommissioning purposes. The management of nuclear knowledge has emerged as a growing challenge in recent years. The need to preserve and transfer nuclear knowledge is compounded by recent trends such as ageing of the nuclear workforce, declining student numbers in nuclear related fields, and the threat of losing accumulated nuclear knowledge. (author)

  6. Reactor vessel sealing plug

    International Nuclear Information System (INIS)

    Dooley, R.A.

    1986-01-01

    This invention relates to an apparatus and method for sealing the cold leg nozzles of a nuclear reactor pressure vessel from a remote location during maintenance and inspection of associated steam generators and pumps while the pressure vessel and refueling canal are filled with water. The apparatus includes a sealing plug for mechanically sealing the cold leg nozzle from the inside of a reactor pressure vessel. The sealing plugs include a primary and a secondary O-ring. An installation tool is suspended within the reactor vessel and carries the sealing plug. The tool telescopes to insert the sealing plug within the cold leg nozzle, and to subsequently remove the plug. Hydraulic means are used to activate the sealing plug, and support means serve to suspend the installation tool within the reactor vessel during installation and removal of the sealing plug

  7. Containment vessel drain system

    Science.gov (United States)

    Harris, Scott G.

    2018-01-30

    A system for draining a containment vessel may include a drain inlet located in a lower portion of the containment vessel. The containment vessel may be at least partially filled with a liquid, and the drain inlet may be located below a surface of the liquid. The system may further comprise an inlet located in an upper portion of the containment vessel. The inlet may be configured to insert pressurized gas into the containment vessel to form a pressurized region above the surface of the liquid, and the pressurized region may operate to apply a surface pressure that forces the liquid into the drain inlet. Additionally, a fluid separation device may be operatively connected to the drain inlet. The fluid separation device may be configured to separate the liquid from the pressurized gas that enters the drain inlet after the surface of the liquid falls below the drain inlet.

  8. Salvage Stories, Preserving Narratives, and Museum Ships

    Directory of Open Access Journals (Sweden)

    Andrew Sawyer

    2013-11-01

    Full Text Available Preserved ships and other vessels are associated with a historiography, in Europe at least, which is still marked by parochialism, antiquarianism, and celebratory narrative. Many evidence difficult histories, and they are also extremely expensive to preserve. Yet, they are clearly valued, as nations in Europe invest heavily in them. This survey examines a range of European examples as sites of cultural, political and national identity. An analytical framework foregrounding the role of narrative and story reveals three aspects to these exhibits: explicit stories connected with specific nations, often reinforcing broader, sometimes implicit, national narratives; and a teleological sequence of loss, recovery and preservation, influenced by nationality, but very similar in form across Europe

  9. NCSX Vacuum Vessel Fabrication

    International Nuclear Information System (INIS)

    Viola ME; Brown T; Heitzenroeder P; Malinowski F; Reiersen W; Sutton L; Goranson P; Nelson B; Cole M; Manuel M; McCorkle D.

    2005-01-01

    The National Compact Stellarator Experiment (NCSX) is being constructed at the Princeton Plasma Physics Laboratory (PPPL) in conjunction with the Oak Ridge National Laboratory (ORNL). The goal of this experiment is to develop a device which has the steady state properties of a traditional stellarator along with the high performance characteristics of a tokamak. A key element of this device is its highly shaped Inconel 625 vacuum vessel. This paper describes the manufacturing of the vessel. The vessel is being fabricated by Major Tool and Machine, Inc. (MTM) in three identical 120 o vessel segments, corresponding to the three NCSX field periods, in order to accommodate assembly of the device. The port extensions are welded on, leak checked, cut off within 1-inch of the vessel surface at MTM and then reattached at PPPL, to accommodate assembly of the close-fitting modular coils that surround the vessel. The 120 o vessel segments are formed by welding two 60 o segments together. Each 60 o segment is fabricated by welding ten press-formed panels together over a collapsible welding fixture which is needed to precisely position the panels. The vessel is joined at assembly by welding via custom machined 8-inch (20.3 cm) wide spacer ''spool pieces''. The vessel must have a total leak rate less than 5 X 10 -6 t-l/s, magnetic permeability less than 1.02(micro), and its contours must be within 0.188-inch (4.76 mm). It is scheduled for completion in January 2006

  10. Radioactive waste processing vessel

    International Nuclear Information System (INIS)

    Hayashi, Masaru; Suzuki, Osamu; Ishizaki, Kanjiro.

    1987-01-01

    Purpose: To obtain a vessel of a reduced weight and with no external leaching of radioactive materials. Constitution: The vessel main body is constituted, for example, with light weight concretes or foamed concretes, particularly, foamed concretes containing fine closed bubbles in the inside. Then, layers having dense texture made of synthetic resin such as polystylene, vinylchloride resin, etc. or metal plate such as stainless plate are integrally disposed to the inner surface of the vessel main body. The cover member also has the same structure. (Sekiya, K.)

  11. Tempest in a vessel

    International Nuclear Information System (INIS)

    Barre, Bertrand

    2015-01-01

    As the ASN made some statements about anomalies of carbon content in the EPR vessel bottom and top, the author recalls and comments some technical issues to better understand the information published on this topic. He notably addresses the role of the vessel, briefly indicates its operating conditions, shape and structure, and mechanical components for the top, its material and mechanical properties, and test samples used to assess mechanical properties. He also comments the phenomenon of radio-induced embrittlement, the vessel manufacturing process, and evokes the applicable regulations. He quotes and comments statements made by the ASN and Areva which evoke further assessments of the concerned components

  12. Preserving Digital Materials

    CERN Document Server

    Harvey, Ross

    2011-01-01

    This book provides a single-volume introduction to the principles, strategies and practices currently applied by librarians and recordkeeping professionals to the critical issue of preservation of digital information. It incorporates practice from both the recordkeeping and the library communities, taking stock of current knowledge about digital preservation and describing recent and current research, to provide a framework for reflecting on the issues that digital preservation raises in professional practice.

  13. Cheboygan Vessel Base

    Data.gov (United States)

    Federal Laboratory Consortium — Cheboygan Vessel Base (CVB), located in Cheboygan, Michigan, is a field station of the USGS Great Lakes Science Center (GLSC). CVB was established by congressional...

  14. High Performance Marine Vessels

    CERN Document Server

    Yun, Liang

    2012-01-01

    High Performance Marine Vessels (HPMVs) range from the Fast Ferries to the latest high speed Navy Craft, including competition power boats and hydroplanes, hydrofoils, hovercraft, catamarans and other multi-hull craft. High Performance Marine Vessels covers the main concepts of HPMVs and discusses historical background, design features, services that have been successful and not so successful, and some sample data of the range of HPMVs to date. Included is a comparison of all HPMVs craft and the differences between them and descriptions of performance (hydrodynamics and aerodynamics). Readers will find a comprehensive overview of the design, development and building of HPMVs. In summary, this book: Focuses on technology at the aero-marine interface Covers the full range of high performance marine vessel concepts Explains the historical development of various HPMVs Discusses ferries, racing and pleasure craft, as well as utility and military missions High Performance Marine Vessels is an ideal book for student...

  15. 2011 Vessel Density

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Automatic Identification Systems (AIS) are a navigation safety device that transmits and monitors the location and characteristics of many vessels in U.S. and...

  16. 2011 Fishing Vessel Density

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Automatic Identification Systems (AIS) are a navigation safety device that transmits and monitors the location and characteristics of many vessels in U.S. and...

  17. Pressurized Vessel Slurry Pumping

    International Nuclear Information System (INIS)

    Pound, C.R.

    2001-01-01

    This report summarizes testing of an alternate ''pressurized vessel slurry pumping'' apparatus. The principle is similar to rural domestic water systems and ''acid eggs'' used in chemical laboratories in that material is extruded by displacement with compressed air

  18. 2013 Tanker Vessel Density

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Automatic Identification Systems (AIS) are a navigation safety device that transmits and monitors the location and characteristics of many vessels in U.S. and...

  19. Maury Journals - US Vessels

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — U.S. vessels observations, after the 1853 Brussels Conference that set International Maritime Standards, modeled after Maury Marine Standard Observations.

  20. Coastal Logbook Survey (Vessels)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains catch (landed catch) and effort for fishing trips made by vessels that have been issued a Federal permit for the Gulf of Mexico reef fish,...

  1. In-vessel tritium

    International Nuclear Information System (INIS)

    Ueda, Yoshio; Ohya, Kaoru; Ashikawa, Naoko; Ito, Atsushi M.; Kato, Daiji; Kawamura, Gakushi; Takayama, Arimichi; Tomita, Yukihiro; Nakamura, Hiroaki; Ono, Tadayoshi; Kawashima, Hisato; Shimizu, Katsuhiro; Takizuka, Tomonori; Nakano, Tomohide; Nakamura, Makoto; Hoshino, Kazuo; Kenmotsu, Takahiro; Wada, Motoi; Saito, Seiki; Takagi, Ikuji; Tanaka, Yasunori; Tanabe, Tetsuo; Yoshida, Masafumi; Toma, Mitsunori; Hatayama, Akiyoshi; Homma, Yuki; Tolstikhina, Inga Yu.

    2012-01-01

    The in-vessel tritium research is closely related to the plasma-materials interaction. It deals with the edge-plasma-wall interaction, the wall erosion, transport and re-deposition of neutral particles and the effect of neutral particles on the fuel recycling. Since the in-vessel tritium shows a complex nonlinear behavior, there remain many unsolved problems. So far, behaviors of in-vessel tritium have been investigated by two groups A01 and A02. The A01 group performed experiments on accumulation and recovery of tritium in thermonuclear fusion reactors and the A02 group studied theory and simulation on the in-vessel tritium behavior. In the present article, outcomes of the research are reviewed. (author)

  2. Reactor pressure vessel support

    International Nuclear Information System (INIS)

    Butti, J.P.

    1977-01-01

    A link and pin support system provides the primary vertical and lateral support for a nuclear reactor pressure vessel without restricting thermally induced radial and vertical expansion and contraction. (Auth.)

  3. 2013 Cargo Vessel Density

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Automatic Identification Systems (AIS) are a navigation safety device that transmits and monitors the location and characteristics of many vessels in U.S. and...

  4. 2013 Fishing Vessel Density

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Automatic Identification Systems (AIS) are a navigation safety device that transmits and monitors the location and characteristics of many vessels in U.S. and...

  5. 2013 Vessel Density

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Automatic Identification Systems (AIS) are a navigation safety device that transmits and monitors the location and characteristics of many vessels in U.S. and...

  6. Ocean Station Vessel

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Ocean Station Vessels (OSV) or Weather Ships captured atmospheric conditions while being stationed continuously in a single location. While While most of the...

  7. Vessel Sewage Discharges

    Science.gov (United States)

    Vessel sewage discharges are regulated under Section 312 of the Clean Water Act, which is jointly implemented by the EPA and Coast Guard. This homepage links to information on marine sanitation devices and no discharge zones.

  8. Reactor pressure vessel design

    International Nuclear Information System (INIS)

    Foehl, J.

    1998-01-01

    As a result of the popularity of the Agencies report 'Neutron Irradiation Embrittlement of Reactor Pressure Vessel Steels' of 1975, it was decided that another report on this broad subject would be of use. In this report, background and contemporary views on specially identified areas of the subject are considered as self-contained chapters, written by experts. In chapter 2, the general principles of reactor pressure vessel design are elaborated. Crack and fracture initiation and propagation are treated in some detail

  9. Graywater Discharges from Vessels

    Science.gov (United States)

    2011-11-01

    metals (e.g., cadmium, chromium, lead, copper , zinc, silver, nickel, and mercury), solids, and nutrients (USEPA, 2008b; USEPA 2010). Wastewater from... flotation ), and disinfection (using ultraviolet light) as compared to traditional Type II MSDs that use either simple maceration and chlorination, or...Coliform Naval Vessels Oceanographic Vessels Small Cruise Ships 25a Vendor 2 Hamann AG Biological Treatment with Dissolved Air Flotation and

  10. LANL Robotic Vessel Scanning

    Energy Technology Data Exchange (ETDEWEB)

    Webber, Nels W. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-11-25

    Los Alamos National Laboratory in J-1 DARHT Operations Group uses 6ft spherical vessels to contain hazardous materials produced in a hydrodynamic experiment. These contaminated vessels must be analyzed by means of a worker entering the vessel to locate, measure, and document every penetration mark on the vessel. If the worker can be replaced by a highly automated robotic system with a high precision scanner, it will eliminate the risks to the worker and provide management with an accurate 3D model of the vessel presenting the existing damage with the flexibility to manipulate the model for better and more in-depth assessment.The project was successful in meeting the primary goal of installing an automated system which scanned a 6ft vessel with an elapsed time of 45 minutes. This robotic system reduces the total time for the original scope of work by 75 minutes and results in excellent data accumulation and transmission to the 3D model imaging program.

  11. FFTF and CRBRP reactor vessels

    International Nuclear Information System (INIS)

    Morgan, R.E.

    1977-01-01

    The Fast Flux Test Facility (FFTF) reactor vessel and the Clinch River Breeder Reactor Plant (CRBRP) reactor vessel each serve to enclose a fast spectrum reactor core, contain the sodium coolant, and provide support and positioning for the closure head and internal structure. Each vessel is located in its reactor cavity and is protected by a guard vessel which would ensure continued decay heat removal capability should a major system leak develop. Although the two plants have significantly different thermal power ratings, 400 megawatts for FFTF and 975 megawatts for CRBRP, the two reactor vessels are comparable in size, the CRBRP vessel being approximately 28% longer than the FFTF vessel. The FFTF vessel diameter was controlled by the space required for the three individual In-Vessel Handling Machines and Instrument Trees. Utilization of the triple rotating plug scheme for CRBRP refueling enables packaging of the larger CRBRP core in a vessel the same diameter as the FFTF vessel

  12. Environmental education on wood preservatives and preservative ...

    African Journals Online (AJOL)

    The development and use of wood preservatives in Nigeria should address not only the cost and demand functions but also the potential hazards in environmental equations. Forest products specialists are often asked about the perceived risks and environmental costs of treated wood products. Evidently, the civil society is ...

  13. 33 CFR 104.215 - Vessel Security Officer (VSO).

    Science.gov (United States)

    2010-07-01

    ...) Understanding of the importance of creating and maintaining safe working and living conditions for passengers... responsibility to preserve the marine environment; and (B) Basic working knowledge of pollution prevention... space numbering; and (B) Understanding of various vessel types; and working knowledge of nautical terms...

  14. Long-term preservation of anammox bacteria.

    Science.gov (United States)

    Rothrock, Michael J; Vanotti, Matias B; Szögi, Ariel A; Gonzalez, Maria Cruz Garcia; Fujii, Takao

    2011-10-01

    Deposit of useful microorganisms in culture collections requires long-term preservation and successful reactivation techniques. The goal of this study was to develop a simple preservation protocol for the long-term storage and reactivation of the anammox biomass. To achieve this, anammox biomass was frozen or lyophilized at two different freezing temperatures (-60°C and in liquid nitrogen (-200°C)) in skim milk media (with and without glycerol), and the reactivation of anammox activity was monitored after a 4-month storage period. Of the different preservation treatments tested, only anammox biomass preserved via freezing in liquid nitrogen followed by lyophilization in skim milk media without glycerol achieved stoichiometric ratios for the anammox reaction similar to the biomass in both the parent bioreactor and in the freshly harvested control treatment. A freezing temperature of -60°C alone, or in conjunction with lyophilization, resulted in the partial recovery of the anammox bacteria, with an equal mixture of anammox and nitrifying bacteria in the reactivated biomass. To our knowledge, this is the first report of the successful reactivation of anammox biomass preserved via sub-zero freezing and/or lyophilization. The simple preservation protocol developed from this study could be beneficial to accelerate the integration of anammox-based processes into current treatment systems through a highly efficient starting anammox biomass.

  15. Mass preserving image registration

    DEFF Research Database (Denmark)

    Gorbunova, Vladlena; Sporring, Jon; Lo, Pechin Chien Pau

    2010-01-01

    The paper presents results the mass preserving image registration method in the Evaluation of Methods for Pulmonary Image Registration 2010 (EMPIRE10) Challenge. The mass preserving image registration algorithm was applied to the 20 image pairs. Registration was evaluated using four different...

  16. Modes of fossil preservation

    Science.gov (United States)

    Schopf, J.M.

    1975-01-01

    The processes of geologic preservation are important for understanding the organisms represented by fossils. Some fossil differences are due to basic differences in organization of animals and plants, but the interpretation of fossils has also tended to be influenced by modes of preservation. Four modes of preservation generally can be distinguished: (1) Cellular permineralization ("petrifaction") preserves anatomical detail, and, occasionally, even cytologic structures. (2) Coalified compression, best illustrated by structures from coal but characteristic of many plant fossils in shale, preserves anatomical details in distorted form and produces surface replicas (impressions) on enclosing matrix. (3) Authigenic preservation replicates surface form or outline (molds and casts) prior to distortion by compression and, depending on cementation and timing, may intergrade with fossils that have been subject to compression. (4) Duripartic (hard part) preservation is characteristic of fossil skeletal remains, predominantly animal. Molds, pseudomorphs, or casts may form as bulk replacements following dissolution of the original fossil material, usually by leaching. Classification of the kinds of preservation in fossils will aid in identifying the processes responsible for modifying the fossil remains of both animals and plants. ?? 1975.

  17. Food preservation by irradiation

    International Nuclear Information System (INIS)

    Labots, H.; Huis in 't Veld, G.J.P.; Verrips, C.T.

    1985-01-01

    After a review of several methods for the preservation of food and the routes of food infections, the following chapters are devoted to the preservation by irradiation. Applications and legal aspects of food irradiation are described. Special reference is made to the international situation. (Auth.)

  18. Self-preserving cosmetics.

    Science.gov (United States)

    Varvaresou, A; Papageorgiou, S; Tsirivas, E; Protopapa, E; Kintziou, H; Kefala, V; Demetzos, C

    2009-06-01

    Preservatives are added to products for two reasons: first, to prevent microbial spoilage and therefore to prolong the shelf life of the product; second, to protect the consumer from a potential infection. Although chemical preservatives prevent microbial growth, their safety is questioned by a growing segment of consumers. Therefore, there is a considerable interest in the development of preservative-free or self-preserving cosmetics. In these formulations traditional/chemical preservatives have been replaced by other cosmetic ingredients with antimicrobial properties that are not legislated as preservatives according to the Annex VI of the Commission Directive 76/768/EEC and the amending directives (2003/15/EC, 2007/17/EC and 2007/22/EC). 'Hurdle Technology', a technology that has been used for the control of product safety in the food industry since 1970s, has also been applied for the production of self-preserving cosmetics. 'Hurdle Technology' is a term used to describe the intelligent combination of different preservation factors or hurdles to deteriorate the growth of microorganisms. Adherence to current good manufacturing practice, appropriate packaging, careful choice of the form of the emulsion, low water activity and low or high pH values are significant variables for the control of microbial growth in cosmetic formulations. This paper describes the application of the basic principles of 'Hurdle Technology' in the production of self-preserving cosmetics. Multifunctional antimicrobial ingredients and plant-derived essential oils and extracts that are used as alternative or natural preservatives and are not listed in Annex VI of the Cosmetic Directive are also reported.

  19. Acrylic vessel cleaning tests

    International Nuclear Information System (INIS)

    Earle, D.; Hahn, R.L.; Boger, J.; Bonvin, E.

    1997-01-01

    The acrylic vessel as constructed is dirty. The dirt includes blue tape, Al tape, grease pencil, gemak, the glue or residue form these tapes, finger prints and dust of an unknown composition but probably mostly acrylic dust. This dirt has to be removed and once removed, the vessel has to be kept clean or at least to be easily cleanable at some future stage when access becomes much more difficult. The authors report on the results of a series of tests designed: (a) to prepare typical dirty samples of acrylic; (b) to remove dirt stuck to the acrylic surface; and (c) to measure the optical quality and Th concentration after cleaning. Specifications of the vessel call for very low levels of Th which could come from tape residues, the grease pencil, or other sources of dirt. This report does not address the concerns of how to keep the vessel clean after an initial cleaning and during the removal of the scaffolding. Alconox is recommended as the cleaner of choice. This acrylic vessel will be used in the Sudbury Neutrino Observatory

  20. Extended precedence preservative crossover for job shop scheduling problems

    Science.gov (United States)

    Ong, Chung Sin; Moin, Noor Hasnah; Omar, Mohd

    2013-04-01

    Job shop scheduling problems (JSSP) is one of difficult combinatorial scheduling problems. A wide range of genetic algorithms based on the two parents crossover have been applied to solve the problem but multi parents (more than two parents) crossover in solving the JSSP is still lacking. This paper proposes the extended precedence preservative crossover (EPPX) which uses multi parents for recombination in the genetic algorithms. EPPX is a variation of the precedence preservative crossover (PPX) which is one of the crossovers that perform well to find the solutions for the JSSP. EPPX is based on a vector to determine the gene selected in recombination for the next generation. Legalization of children (offspring) can be eliminated due to the JSSP representation encoded by using permutation with repetition that guarantees the feasibility of chromosomes. The simulations are performed on a set of benchmarks from the literatures and the results are compared to ensure the sustainability of multi parents recombination in solving the JSSP.

  1. Radioactive liquid containing vessel

    International Nuclear Information System (INIS)

    Sakurada, Tetsuo; Kawamura, Hironobu.

    1993-01-01

    Cooling jackets are coiled around the outer circumference of a container vessel, and the outer circumference thereof is covered with a surrounding plate. A liquid of good conductivity (for example, water) is filled between the cooling jackets and the surrounding plate. A radioactive liquid is supplied to the container vessel passing through a supply pipe and discharged passing through a discharge pipe. Cooling water at high pressure is passed through the cooling water jackets in order to remove the heat generated from the radioactive liquid. Since cooling water at high pressure is thus passed through the coiled pipes, the wall thickness of the container vessel and the cooling water jackets can be reduced, thereby enabling to reduce the cost. Further, even if the radioactive liquid is leaked, there is no worry of contaminating cooling water, to prevent contamination. (I.N.)

  2. Chronopolis Digital Preservation Network

    Directory of Open Access Journals (Sweden)

    David Minor

    2010-07-01

    Full Text Available The Chronopolis Digital Preservation Initiative, one of the Library of Congress’ latest efforts to collect and preserve at-risk digital information, has completed its first year of service as a multi-member partnership to meet the archival needs of a wide range of domains.Chronopolis is a digital preservation data grid framework developed by the San Diego Supercomputer Center (SDSC at UC San Diego, the UC San Diego Libraries (UCSDL, and their partners at the National Center for Atmospheric Research (NCAR in Colorado and the University of Maryland's Institute for Advanced Computer Studies (UMIACS.Chronopolis addresses a critical problem by providing a comprehensive model for the cyberinfrastructure of collection management, in which preserved intellectual capital is easily accessible, and research results, education material, and new knowledge can be incorporated smoothly over the long term. Integrating digital library, data grid, and persistent archive technologies, Chronopolis has created trusted environments that span academic institutions and research projects, with the goal of long-term digital preservation.A key goal of the Chronopolis project is to provide cross-domain collection sharing for long-term preservation. Using existing high-speed educational and research networks and mass-scale storage infrastructure investments, the partnership is leveraging the data storage capabilities at SDSC, NCAR, and UMIACS to provide a preservation data grid that emphasizes heterogeneous and highly redundant data storage systems.In this paper we will explore the major themes within Chronopolis, including:a The philosophy and theory behind a nationally federated data grid for preservation. b The core tools and technologies used in Chronopolis. c The metadata schema that is being developed within Chronopolis for all of the data elements. d Lessons learned from the first year of the project.e Next steps in digital preservation using Chronopolis: how we

  3. Mass Preserving Registration for lung CT

    DEFF Research Database (Denmark)

    Gorbunova, Vladlena; Lo, Pechin Chien Pau; Loeve, Martin

    2009-01-01

    intensities due to differences in inspiration level, we propose to adjust the intensity of lung tissue according to the local expansion or compression. An image registration method without intensity adjustment is compared to the proposed method. Both approaches are evaluated on a set of 10 pairs of expiration...... and inspiration CT scans of children with cystic fibrosis lung disease. The proposed method with mass preserving adjustment results in significantly better alignment of the vessel trees. Analysis of local volume change for regions with trapped air compared to normally ventilated regions revealed larger...

  4. Optimization of preservation activities and preservation engineering (1)

    International Nuclear Information System (INIS)

    Aoki, Takayuki; Mimaki, Hidehito; Oda, Mitsuyuki

    2004-01-01

    In order to deal with the optimization of preservation activities and 'preservation engineering' which makes it possible, the relation between general society and preservation, the content and the structure of preservation activities, and the viewpoint and the approach of the optimization of the preventive preservation are described. The optimization of the preventive preservation is shown respectively in the four stages of planning, implementation, result evaluation and countermeasure. (K. Kato)

  5. VT Historic Preservation Grant

    Data.gov (United States)

    Vermont Center for Geographic Information — The State-funded Historic Preservation Grant Program helps municipalities and non-profit organizations rehabilitate the historic buildings that are a vital part of...

  6. Preservation of Built Environments

    DEFF Research Database (Denmark)

    Pilegaard, Marie Kirstine

    When built environments and recently also cultural environments are to be preserved, the historic and architectural values are identified as the key motivations. In Denmark the SAVE system is used as a tool to identify architectural values, but in recent years it has been criticized for having...... architectural value in preservation work as a matter of maintaining the buildings -as keeping them "alive" and allowing this to continue in the future. The predominantly aesthetic preservation approach will stop the buildings' life process, which is the same as - "letting them die". Finnebyen in Aarhus...... is an example of a residential area, where the planning authority currently has presented a preservational district plan, following guidelines from the SAVE method. The purpose is to protect the area's architectural values in the future. The predominantly aesthetic approach is here used coupled to the concept...

  7. Radiation preservation of maize

    International Nuclear Information System (INIS)

    Wasito.

    1980-01-01

    Radiation preservation of maize was carried out. Radiation doses and sources, shielding materials, packaging materials, chemical radiation effects, biological radiation effects, were discussed. Experimental methods, samples and accessories were also presented. (SMN)

  8. Digital preservation for heritages

    CERN Document Server

    Lu, Dongming

    2011-01-01

    ""Digital Preservation for Heritages: Technologies and Applications"" provides a comprehensive and up-to-date coverage of digital technologies in the area of cultural heritage preservation, including digitalization, research aiding, conservation aiding, digital exhibition, and digital utilization. Processes, technical frameworks, key technologies, as well as typical systems and applications are discussed in the book. It is intended for researchers and students in the fields of computer science and technology, museology, and archaeology. Dr. Dongming Lu is a professor at College of Computer Sci

  9. Indiana Pavement Preservation Program

    OpenAIRE

    Ong, Ghim Ping (Raymond); Nantung, Tommy E.; Sinha, Kumares C.

    2010-01-01

    State highway agencies are facing immense pressure to maintain roads at acceptable levels amidst the challenging financial and economic situations. In recent years, pavement preservation has been sought as a potential alternative for managing the pavement assets, believing that it would provide a cost-effective solution in maintaining infrastructural conditions and meeting user expectations. This study explores the potential of pavement preservation concepts in managing the agency‘s pavement ...

  10. Pressure vessel integrity 1991

    International Nuclear Information System (INIS)

    Bhandari, S.; Doney, R.O.; McDonald, M.S.; Jones, D.P.; Wilson, W.K.; Pennell, W.E.

    1991-01-01

    This volume contains papers relating to the structural integrity assessment of pressure vessels and piping, with special emphasis on nuclear industry applications. The papers were prepared for technical sessions developed under the sponsorship of the ASME Pressure Vessels and Piping Division Committees for Codes and Standards, Computer Technology, Design and Analysis, and Materials Fabrication. They were presented at the 1991 Pressure Vessels and Piping Division Conference in San Diego, California, June 23-27. The primary objective of the sponsoring organization is to provide a forum for the dissemination and discussion of information on development and application of technology for the structural integrity assessment of pressure vessels and piping. This publication includes contributions from authors from Australia, France, Japan, Sweden, Switzerland, the United Kingdom, and the United States. The papers here are organized in six sections, each with a particular emphasis as indicated in the following section titles: Fracture Technology Status and Application Experience; Crack Initiation, Propagation and Arrest; Ductile Tearing; Constraint, Stress State, and Local-Brittle-Zones Effects; Computational Techniques for Fracture and Corrosion Fatigue; and Codes and Standards for Fatigue, Fracture and Erosion/Corrosion

  11. The reactor vessel steels

    International Nuclear Information System (INIS)

    Bilous, W.; Hajewska, E.; Szteke, W.; Przyborska, M.; Wasiak, J.; Wieczorkowski, M.

    2005-01-01

    In the paper the fundamental steels using in the construction of pressure vessel water reactor are discussed. The properties of these steels as well as the influence of neutron irradiation on its degradation in the time of exploitation are also done. (authors)

  12. Vacuum distilling vessel

    Energy Technology Data Exchange (ETDEWEB)

    Reik, H

    1928-12-27

    Vacuum distilling vessel for mineral oil and the like, characterized by the ring-form or polyconal stiffeners arranged inside, suitably eccentric to the casing, being held at a distance from the casing by connecting members of such a height that in the resulting space if necessary can be arranged vapor-distributing pipes and a complete removal of the residue is possible.

  13. Visualization of vessel traffic

    NARCIS (Netherlands)

    Willems, C.M.E.

    2011-01-01

    Moving objects are captured in multivariate trajectories, often large data with multiple attributes. We focus on vessel traffic as a source of such data. Patterns appearing from visually analyzing attributes are used to explain why certain movements have occurred. In this research, we have developed

  14. GOLD PRESSURE VESSEL SEAL

    Science.gov (United States)

    Smith, A.E.

    1963-11-26

    An improved seal between the piston and die member of a piston-cylinder type pressure vessel is presented. A layer of gold, of sufficient thickness to provide an interference fit between the piston and die member, is plated on the contacting surface of at least one of the members. (AEC)

  15. Reactor vessel stud tensioner

    International Nuclear Information System (INIS)

    Malandra, L.J.; Beer, R.W.; Salton, R.B.; Spiegelman, S.R.; Cognevich, M.L.

    1982-01-01

    A quick-acting stud tensioner, for facilitating the loosening or tightening of a stud nut on a reactor vessel stud, has gripper jaws which when the tensioner is lowered into engagement with the upper end of the stud are moved inwards to grip the upper end and which when the tensioner is lifted move outward to release the upper end. (author)

  16. PDX vacuum vessel stress analysis

    International Nuclear Information System (INIS)

    Nikodem, Z.D.

    1975-01-01

    A stress analysis of PDX vacuum vessel is described and the summary of results is presented. The vacuum vessel is treated as a toroidal shell of revolution subjected to an internal vacuum. The critical buckling pressure is calculated. The effects of the geometrical discontinuity at the juncture of toroidal shell head and cylindrical outside wall, and the concavity of the cylindrical wall are examined. An effect of the poloidal field coil supports and the vessel outside supports on the stress distribution in the vacuum vessel is determined. A method evaluating the influence of circular ports in the vessel wall on the stress level in the vessel is outlined

  17. Percutaneous transluminal angioplasty of supraaortic vessel

    International Nuclear Information System (INIS)

    Belli, L.; Puricelli, G.; Cerasano, A.; Cornalba, P.; Rota, L.; Facchinetti, P.

    1988-01-01

    Sixteen cases are reported of dilatation of supra-aortic vessels; in 14/16 patients the vessel involved was either the subclavian artery or the brachio-cephalich trunk. Special attention is paid to the choice of patients - the ideal one presenting with a single uncalcified lesion, with stenosis more than 50% of diameter; the symptoms have recently appeared, with a significant difference (more than 20 mmHg) in the pressure of the two arms. The technical aspects of the angioplastic procedure are discussed, especially in order to preserve the intracriminal circulation and to limit possible complications. The presence of reversed blood flow in the vertebral artery is extremely important to preserve intracranial circulation from possible embolism; normal flow obtained at the end of the procedure is therefore an useful proof of successful dilatation. The advantages are stressed of dilatation over the surgical technique used in the past. Finally, the importance is emphasized of a correct follow-up and doppler control of supra-aortic circulation

  18. Vessels in Transit - Web Tool

    Data.gov (United States)

    Department of Transportation — A web tool that provides real-time information on vessels transiting the Saint Lawrence Seaway. Visitors may sort by order of turn, vessel name, or last location in...

  19. Training for Preservation Management

    Directory of Open Access Journals (Sweden)

    Mirjam M. Foot

    1999-05-01

    Full Text Available In August 1997 the first of a series of summer schools in Preservation Management was held at the Archivschule in Marburg (Germany. The school was organised by the ECPA, the LIBER Division on Preservation, ICA and the Archivschule itself and was aimed at archivists and librarians in management positions from European institutions. It dealt with managerial, organisational and financial aspects of preservation and required active participation by those attending. Apart from introductory sessions by the teaching staff at the Archivschule, a large part of the course took the form of working groups, discussions, assignments and role play, to which participants were expected to take their own experience and problems. The school was conducted in German. Topics, spread over five days, ranged from preservation in the context of the core activities of libraries and archives; planning of preservation projects; general management issues, such as resource management, budgeting, priority setting, communication and effecting change; to more detailed considerations of day-to-day issues, such as storage, disaster control, microfilming and digitising, mass conservation processes, and moulds and fungi.

  20. Reactor vessel sealing plug

    International Nuclear Information System (INIS)

    Dooley, R.A.

    1986-01-01

    An apparatus is described for sealing a cold leg nozzle of a nuclear reactor pressure vessel from a remote location comprising: at least one sealing plug for mechanically sealing the nozzle from the inside of the reactor pressure vessel. The sealing plug includes a plate and a cone assembly having an end part receptive in the nozzle, the plate being axially moveable relative to the cone assembly. The plate and cone assembly have confronting bevelled edges defining an opening therebetween. A primary O-ring is disposed about the opening and is supported on the bevelled edges, the plate being guidably mounted to the cone assembly for movement toward the cone assembly to radially expand the primary O-ring into sealing engagement with the nozzle. A means is included for providing relative movement between the outer plate and the cone assembly

  1. Mobile nuclear reactor containment vessel

    International Nuclear Information System (INIS)

    Thompson, R.E.; Spurrier, F.R.; Jones, A.R.

    1978-01-01

    A containment vessel for use in mobile nuclear reactor installations is described. The containment vessel completely surrounds the entire primary system, and is located as close to the reactor primary system components as is possible in order to minimize weight. In addition to being designed to withstand a specified internal pressure, the containment vessel is also designed to maintain integrity as a containment vessel in case of a possible collision accident

  2. Nuclear reactor vessel inspection apparatus

    International Nuclear Information System (INIS)

    Blackstone, E.G.; Lofy, R.A.; Williams, L.P.

    1979-01-01

    Apparatus for the in situ inspection of a nuclear reactor vessel to detect the location and character of flaws in the walls of the vessel, in the welds joining the various sections of the vessel, in the welds joining attachments such as nozzles, elbows and the like to the reactor vessel and in such attachments wherein an inspection head carrying one or more ultrasonic transducers follows predetermined paths in scanning the various reactor sections, welds and attachments

  3. Reactor vessel stud closure system

    International Nuclear Information System (INIS)

    Spiegelman, S.R.; Salton, R.B.; Beer, R.W.; Malandra, L.J.; Cognevich, M.L.

    1982-01-01

    A quick-acting stud tensioner apparatus for enabling the loosening or tightening of a stud nut on a reactor vessel stud. The apparatus is adapted to engage the vessel stud by closing a gripper around an upper end of the vessel stud when the apparatus is seated on the stud. Upon lifting the apparatus, the gripper releases the vessel stud so that the apparatus can be removed

  4. Reactor pressure vessel steels

    International Nuclear Information System (INIS)

    Van De Velde, J.; Fabry, A.; Van Walle, E.; Chaouuadi, R.

    1998-01-01

    Research and development activities related to reactor pressure vessel steels during 1997 are reported. The objectives of activities of the Belgian Nuclear Research Centre SCK/CEN in this domain are: (1) to develop enhanced surveillance concepts by applying micromechanics and fracture-toughness tests to small specimens, and by performing damage modelling and microstructure characterization; (2) to demonstrate a methodology on a broad database; (3) to achieve regulatory acceptance and industrial use

  5. Reactor Pressure Vessel Steels

    Energy Technology Data Exchange (ETDEWEB)

    Van de Velde, J.; Fabry, A.; Van Walle, E.; Chaoudi, R

    1998-07-01

    SCK-CEN's R and D programme on Reactor Pressure Vessel (RPV) Steels in performed in support of the RVP integrity assessment. Its main objectives are: (1) to develop enhanced surveillance concepts by applying micromechanics and fracture-toughness tests to small specimens, and by performing damage modelling and microstructure characterization; (2) to demonstrate the applied methodology on a broad database; (3) to achieve regulatory acceptance and industrial use. Progress and achievements in 1999 are reported.

  6. Cancer and fertility preservation

    DEFF Research Database (Denmark)

    Lambertini, Matteo; Del Mastro, Lucia; Pescio, Maria C

    2016-01-01

    In the last years, thanks to the improvement in the prognosis of cancer patients, a growing attention has been given to the fertility issues. International guidelines on fertility preservation in cancer patients recommend that physicians discuss, as early as possible, with all patients...... of reproductive age their risk of infertility from the disease and/or treatment and their interest in having children after cancer, and help with informed fertility preservation decisions. As recommended by the American Society of Clinical Oncology and the European Society for Medical Oncology, sperm...... data have become available, and several issues in this field are still controversial and should be addressed by both patients and their treating physicians.In April 2015, physicians with expertise in the field of fertility preservation in cancer patients from several European countries were invited...

  7. Phenomenological vessel burst investigations

    International Nuclear Information System (INIS)

    Hippelein, K.W.; Julisch, P.; Muz, J.; Schiedermaier, J.

    1985-07-01

    Fourteen burst experiments have been carried out using vessels with circumferential and longitudinal flaws, for investigation of the fracture behaviour, i.e. the time-related fracture opening. The vessels had dimensions (outer diameter x wall thickness = 800 x 47 mm) which correspond to the dimensions of the main coolant piping of a 1300 MW e PWR. The test specimens had been made of the base-safe material 20 MnMoNi 55 and of a special, 22 NiMoCr 37 base alloy. The experimental conditions with regard to pressure and temperature have been chosen so as to correspond to normal operating conditions of a PWR (p∝17.5 MPa, T∝300 0 C), i.e. the flaws have been so dimensioned that failure was to be expected at a pressure of p∝17.5 MPa. As a rule, water has been used as the pressure medium, or in some cases air, in order to influence the time-dependent pressure decrease. Fluid and structural dynamics calculations have also been made. In order to determine the impact of a fast propagating crack on the leak-to-fracture curve, which normally is defined by quasistationary experiments, suitable tests have been made with large-volume, cylindrical vessels (outer diameter x wall thickness x length = 3000 x 21 x 14000 mm) made of the material WSt E 43. The leak-before-fracture criterion has been confirmed. (orig./HP) [de

  8. Blood Vessels in Allotransplantation.

    Science.gov (United States)

    Abrahimi, P; Liu, R; Pober, J S

    2015-07-01

    Human vascularized allografts are perfused through blood vessels composed of cells (endothelium, pericytes, and smooth muscle cells) that remain largely of graft origin and are thus subject to host alloimmune responses. Graft vessels must be healthy to maintain homeostatic functions including control of perfusion, maintenance of permselectivity, prevention of thrombosis, and participation in immune surveillance. Vascular cell injury can cause dysfunction that interferes with these processes. Graft vascular cells can be activated by mediators of innate and adaptive immunity to participate in graft inflammation contributing to both ischemia/reperfusion injury and allograft rejection. Different forms of rejection may affect graft vessels in different ways, ranging from thrombosis and neutrophilic inflammation in hyperacute rejection, to endothelialitis/intimal arteritis and fibrinoid necrosis in acute cell-mediated or antibody-mediated rejection, respectively, and to diffuse luminal stenosis in chronic rejection. While some current therapies targeting the host immune system do affect graft vascular cells, direct targeting of the graft vasculature may create new opportunities for preventing allograft injury and loss. © Copyright 2015 The American Society of Transplantation and the American Society of Transplant Surgeons.

  9. Ionizing radiations and blood vessels

    International Nuclear Information System (INIS)

    Vorob'ev, E.I.; Stepanov, R.P.

    1985-01-01

    Data on phenomenology of radiation-induced changes in blood vessels are systematized and authors' experience is generalized. Modern concepts about processes leading to vessel structure injury after irradiation is critically analyzed. Special attention is paid to reparation and compensation of X-ray vessel injury, consideration of which is not yet sufficiently elucidated in literature

  10. Ionizing radiations and blood vessels

    International Nuclear Information System (INIS)

    Vorob'ev, E.I.; Stepanov, R.P.

    1985-01-01

    Data on phenomeology of radiation changes of blood vessels are systemized and the authors' experience is generalyzed. A critical analysis of modern conceptions on processes resulting in vessel structure damage after irradiation, is given. Special attention is paid to reparation and compensation of radiation injury of vessels

  11. Optimization of preservation activities and preservation engineering (2)

    International Nuclear Information System (INIS)

    Aoki, Takayuki; Mimaki, Hidehito; Oda, Mitsuyuki

    2004-01-01

    In order to deal with the optimization of preservation activities and 'preservation engineering' which makes it possible, the viewpoint and the approach of the optimization of the ex post facto preservation and the content to be possessed in 'preservation engineering' are described. The optimization of the ex post facto preservation is shown respectively in the four stages of planning, implementation, result evaluation and countermeasure. (K. Kato)

  12. Parenting Perfectionism and Parental Adjustment

    OpenAIRE

    Lee, Meghan A.; Schoppe-Sullivan, Sarah J.; Kamp Dush, Claire M.

    2012-01-01

    The parental role is expected to be one of the most gratifying and rewarding roles in life. As expectations of parenting become ever higher, the implications of parenting perfectionism for parental adjustment warrant investigation. Using longitudinal data from 182 couples, this study examined the associations between societal- and self-oriented parenting perfectionism and new mothers’ and fathers’ parenting self-efficacy, stress, and satisfaction. For mothers, societal-oriented parenting perf...

  13. Advanced Digital Preservation

    CERN Document Server

    Giaretta, David

    2011-01-01

    There is growing recognition of the need to address the fragility of digital information, on which our society heavily depends for smooth operation in all aspects of daily life. This has been discussed in many books and articles on digital preservation, so why is there a need for yet one more? Because, for the most part, those other publications focus on documents, images and webpages -- objects that are normally rendered to be simply displayed by software to a human viewer. Yet there are clearly many more types of digital objects that may need to be preserved, such as databases, scientific da

  14. Preservation of Fertility Potential for Gender and Sex Diverse Individuals.

    Science.gov (United States)

    Johnson, Emilie K; Finlayson, Courtney

    2016-01-01

    Gender and sex diverse individuals-transgender individuals and those with disorders of sex development (DSD)-both face medical treatments that may impair biological fertility potential. Young DSD patients also often have abnormal gonadal development. Fertility preservation for these populations has historically been poorly understood and rarely addressed. Future fertility should be discussed with gender and sex diverse individuals, particularly given recent advances in fertility preservation technologies and evolving views of fertility potential. Key ethical issues include parental proxy decision-making and uncertainty regarding prepubertal fertility preservation technologies. Many opportunities exist for advancing fertility-related care and research for transgender and DSD patients.

  15. Integral-preserving integrators

    International Nuclear Information System (INIS)

    McLaren, D I; Quispel, G R W

    2004-01-01

    Ordinary differential equations having a first integral may be solved numerically using one of several methods, with the integral preserved to machine accuracy. One such method is the discrete gradient method. It is shown here that the order of the method can be bootstrapped repeatedly to higher orders of accuracy. The method is illustrated using the Henon-Heiles system. (letter to the editor)

  16. Foodstuffs preservation by ionization

    International Nuclear Information System (INIS)

    1991-12-01

    This document contains all the papers presented at the meeting on foodstuffs preservation by ionization. These papers deal especially with the food ionization process, its development and the view of the food industry on ionization. Refs and figs (F.M.)

  17. Preserving food with radiation

    International Nuclear Information System (INIS)

    Thomas, A.C

    1978-01-01

    Food irradiation is becoming an increasingly more important method of food preservataion. The irradiation process and its advangages are briefly described, and its use in the preservation of poultry and various kinds of fruits is discussed. Fruit export is hampered by restrictions due to infestation. Radiation disinfestation will therefore be of great advantage and may lead to a growth in export markets

  18. Preserve America News

    Science.gov (United States)

    phone number. Whether or not you're able to let us know ahead of time, however, we hope you can join us Amache Preservation Society in Colorado and the Friends of Mount Hope Cemetery in New York. This brings Places: Breathing New Life into Our Communities." Read about this informative session. National

  19. POLARISATION PRESERVING OPTICAL FIBRE

    DEFF Research Database (Denmark)

    2000-01-01

    . This cladding structure provides polarisation preserving properties to the optical fibre. Optical fibres using this technology may have claddings with elements placed non-periodically as well as in a two-dimensional periodic lattice - such as cladding providing Photonic Band Gap (PBG) effects....

  20. Wood preservative testing

    Science.gov (United States)

    Rebecca Ibach; Stan T. Lebow

    2012-01-01

    Most wood species used in commercial and residential construction have little natural biological durability and will suffer from biodeterioration when exposed to moisture. Historically, this problem has been overcome by treating wood for outdoor use with toxic wood preservatives. As societal acceptance of chemical use changes, there is continual pressure to develop and...

  1. Preservation in New Buildings

    Directory of Open Access Journals (Sweden)

    Christopher Kitching

    2000-06-01

    Full Text Available In the United Kingdom (as in many other countries increasing attention is being paid to the importance of each library and archive having a written preservation strategy endorsed by its governing body. So increasingly we are asking: where does „preservation“ begin and what are its top priorities? Some would say preservation begins with the definition of collecting policies to ensure that only relevant items are acquired in the first place, and therefore that no unnecessary costs are incurred on the long-term care of unwanted and unconsulted items. Others might argue that the first priority must be the careful appraisal of existing holdings to determine their preservation and conservation requirements and to prioritise their treatment. Or should preservation begin with damage-limitation: restricting the physical handling of books and documents, on the one hand by providing whenever possible surrogate copies in digital formats or microform, and on the other hand by offering at least basic protection through appropriate boxing and packaging? This, surely, goes hand-in-hand with the education of staff and readers about the importance of treating rare or unique materials with proper respect.

  2. Preserving the Seminar Experience

    Science.gov (United States)

    Ramsey, David; Evans, Jocelyn; Levy, Meyer

    2016-01-01

    This article presents a new approach to online graduate education. With hopes of recruiting a larger cohort in order to preserve a graduate program struggling with low enrollment, we began offering a limited number of seats to students who would attend class in real time but from remote locations, using a videoconferencing platform. Unlike…

  3. DNA preservation in silk.

    Science.gov (United States)

    Liu, Yawen; Zheng, Zhaozhu; Gong, He; Liu, Meng; Guo, Shaozhe; Li, Gang; Wang, Xiaoqin; Kaplan, David L

    2017-06-27

    The structure of DNA is susceptible to alterations at high temperature and on changing pH, irradiation and exposure to DNase. Options to protect and preserve DNA during storage are important for applications in genetic diagnosis, identity authentication, drug development and bioresearch. In the present study, the stability of total DNA purified from human dermal fibroblast cells, as well as that of plasmid DNA, was studied in silk protein materials. The DNA/silk mixtures were stabilized on filter paper (silk/DNA + filter) or filter paper pre-coated with silk and treated with methanol (silk/DNA + PT-filter) as a route to practical utility. After air-drying and water extraction, 50-70% of the DNA and silk could be retrieved and showed a single band on electrophoretic gels. 6% silk/DNA + PT-filter samples provided improved stability in comparison with 3% silk/DNA + filter samples and DNA + filter samples for DNA preservation, with ∼40% of the band intensity remaining at 37 °C after 40 days and ∼10% after exposure to UV light for 10 hours. Quantitative analysis using the PicoGreen assay confirmed the results. The use of Tris/borate/EDTA (TBE) buffer enhanced the preservation and/or extraction of the DNA. The DNA extracted after storage maintained integrity and function based on serving as a functional template for PCR amplification of the gene for zinc finger protein 750 (ZNF750) and for transgene expression of red fluorescence protein (dsRed) in HEK293 cells. The high molecular weight and high content of a crystalline beta-sheet structure formed on the coated surfaces likely accounted for the preservation effects observed for the silk/DNA + PT-filter samples. Although similar preservation effects were also obtained for lyophilized silk/DNA samples, the rapid and simple processing available with the silk-DNA-filter membrane system makes it appealing for future applications.

  4. The impact of vessel speed reduction on port accidents.

    Science.gov (United States)

    Chang, Young-Tae; Park, Hyosoo

    2016-03-19

    Reduced-speed zones (RSZs) have been designated across the world to control emissions from ships and prevent mammal strikes. While some studies have examined the effectiveness of speed reduction on emissions and mammal preservation, few have analyzed the effects of reduced ship speed on vessel safety. Those few studies have not yet measured the relationship between vessel speed and accidents by using real accident data. To fill this gap in the literature, this study estimates the impact of vessel speed reduction on vessel damages, casualties and frequency of vessel accidents. Accidents in RSZ ports were compared to non-RSZ ports by using U.S. Coast Guard data to capture the speed reduction effects. The results show that speed reduction influenced accident frequency as a result of two factors, the fuel price and the RSZ designation. Every $10 increase in the fuel price led to a 10.3% decrease in the number of accidents, and the RSZ designation reduced vessel accidents by 47.9%. However, the results do not clarify the exact impact of speed reduction on accident casualty. Copyright © 2016 Elsevier Ltd. All rights reserved.

  5. Pressure vessel lid

    International Nuclear Information System (INIS)

    Schoening, J.; Elter, C.; Becker, G.; Pertiller, S.

    1986-01-01

    The invention concerns a lid for closing openings in reactor pressure vessels containing helium, which is made as a circular casting with hollow spaces and a flat floor and is set on the opening and kept down. It consists of helium-tight metal cast material with sufficient temperature resistance. There are at least two concentric heat resistant seals let into the bottom of the lid. The bottom is in immediate contact with the container atmosphere and has hollow spaces in its inside in the area opposite to the opening. (orig./HP) [de

  6. [Small vessel cerebrovascular disease].

    Science.gov (United States)

    Cardona Portela, P; Escrig Avellaneda, A

    2018-05-09

    Small vessel vascular disease is a spectrum of different conditions that includes lacunar infarction, alteration of deep white matter, or microbleeds. Hypertension is the main risk factor, although the atherothrombotic lesion may be present, particularly in large-sized lacunar infarctions along with other vascular risk factors. MRI findings are characteristic and the lesions authentic biomarkers that allow differentiating the value of risk factors and defining their prognostic value. Copyright © 2018 SEH-LELHA. Publicado por Elsevier España, S.L.U. All rights reserved.

  7. Fertility Preservation for Pediatric Patients: Current State and Future Possibilities.

    Science.gov (United States)

    Johnson, Emilie K; Finlayson, Courtney; Rowell, Erin E; Gosiengfiao, Yasmin; Pavone, Mary Ellen; Lockart, Barbara; Orwig, Kyle E; Brannigan, Robert E; Woodruff, Teresa K

    2017-07-01

    This review provides an overview of pediatric fertility preservation. Topics covered include the patient populations who could benefit, the current state of fertility preservation options and research, and considerations related to ethics and program development. A broad Embase® and PubMed® search was performed to identify publications discussing investigational, clinical, ethical and health care delivery issues related to pediatric fertility preservation. Relevant publications were reviewed and summarized. Populations who could benefit from fertility preservation in childhood/adolescence include oncology patients, patients with nononcologic conditions requiring gonadotoxic chemotherapy, patients with differences/disorders of sex development and transgender individuals. Peripubertal and postpubertal fertility preservation options are well established and include cryopreservation of oocytes, embryos or sperm. Prepubertal fertility preservation is experimental. Multiple lines of active research aim to develop technologies that will enable immature eggs and sperm to be matured and used to produce a biological child in the future. Ethical challenges include the need for parental proxy decision making and the fact that fertility preservation procedures can be considered not medically necessary. Successful multidisciplinary fertility preservation care teams emphasize partnerships with adult colleagues, prioritize timely consultations and use standardized referral processes. Some aspects of fertility preservation are not covered by insurance and out-of-pocket costs can be prohibitive. Pediatric fertility preservation is an emerging, evolving field. Fertility preservation options for prepubertal patients with fertility altering conditions such as cancer and differences/disorders of sex development are currently limited. However, multiple lines of active research hold promise for the future. Key considerations include establishing a multidisciplinary team to provide

  8. Food preservation by irradiation

    International Nuclear Information System (INIS)

    Oztasiran, I.

    1984-01-01

    Irradiation is a physical process for treating food and as such it is comparable to other processing techniques such as heating or freezing foods for preservation. The energy level used in food irradiation is always below that producing radioactivity in the treated food, hence this aspect can be totally excluded in wholesomeness evaluations. Water is readily ionized and may be the primary source of ionization in foods with secondary effects on other molecules, possibly more a result of water ionization than of direct hits. In the presence of oxygen, highly reactive compounds may be produced, such as H, H 3 0+ and H 2 O 2 . Radiation at the energy flux levels used for food (<2 MeV) does not induce radioactivity. Food irradiation applications are already technically and economically feasible and that food so treated is suitable for consumption. Food irradiation techniques can play an important role for an improved preservation, storage and distribution of food products. (author)

  9. Food preservation by irradiation

    International Nuclear Information System (INIS)

    Kooij, J. van

    1981-01-01

    Twenty-five years of development work on the preservation of food by irradiation have shown that this technology has the potential to reduce post-harvest losses and to produce safe foods. The technological feasibility has been established but general acceptance of food irradiation by national regulatory bodies and consumers requires attention. The positive aspects of food preservation by irradiation include: the food keeps its freshness and its physical state, agents which cause spoilage (bacteria, etc.) are eliminated, recontamination does not take place, provided packaging materials are impermeable to bacteria and insects. It inhibits sprouting of root crops, kills insects and parasites, inactivates bacteria, spores and moulds, delays ripening of fruit, improves the technological properties of food. It makes foods biologically safe, allows the production of shelf-stable foods and is excellent for quarantine treatment, and generally improves food hygiene. The dose ranges needed for effective treatment are given

  10. How to preserve foods

    International Nuclear Information System (INIS)

    Balek, V.; Vadassova, J.

    1979-01-01

    The use of gamma and fast electron radiations for food preservation is described. Examples are given of the application of ionizing radiation for retarding potato germination, onion growth, and fruit ripening, for limiting the action of microorganisms, and removing salmonella from meat products. The method has remarkable prospects although it may not be considered to be a general-purpose method. Geographic and economic conditions should always be taken into consideration. (J.P.)

  11. Preservation and gamma irradiation

    International Nuclear Information System (INIS)

    Ramiere, R.

    1991-01-01

    The paper reviews briefly the application of gamma radiation to preservation of cultural objects for disinsectization, disinfection and strengthening of materials such as wood or stone by impregnation with a liquid resin and in situ polymerization. As heavy equipment is required two facilities are specialized a 1000 T Bq cobalt 60 source at Grenoble (France) and 100 T Bq one at Rostoky (Czechoslovakia). Examples of treated objects are given [fr

  12. Beneficial bread without preservatives

    OpenAIRE

    Denkova, Zapryana; Denkova, Rositsa

    2014-01-01

    Besides their inherent nutritional value functional foods contain substances that have beneficial impact on the functioning of organs and systems in the human body and reduce the risk of disease. Bread and bakery goods are basic foods in the diet of contemporary people. Preservatives are added to the composition of foods in order to ensure their microbiological safety, but these substances affect directly the balance of microflora in the tract. A great problem is mold and bacterial spoilage (...

  13. Fertility preservation 2

    Science.gov (United States)

    De Vos, Michel; Smitz, Johan; Woodruff, Teresa K

    2014-01-01

    Enhanced long-term survival rates of young women with cancer and advances in reproductive medicine and cryobiology have culminated in an increased interest in fertility preservation methods in girls and young women with cancer. Present data suggest that young patients with cancer should be referred for fertility preservation counselling quickly to help with their coping process. Although the clinical application of novel developments, including oocyte vitrification and oocyte maturation in vitro, has resulted in reasonable success rates in assisted reproduction programmes, experience with these techniques in the setting of fertility preservation is in its infancy. It is hoped that these and other approaches, some of which are still regarded as experimental (eg, ovarian tissue cryopreservation, pharmacological protection against gonadotoxic agents, in-vitro follicle growth, and follicle transplantation) will be optimised and become established within the next decade. Unravelling the complex mechanisms of activation and suppression of follicle growth will not only expand the care of thousands of women diagnosed with cancer, but also inform the care of millions of women confronted with reduced reproductive fitness because of ageing. PMID:25283571

  14. Grain preservation in SSSR

    International Nuclear Information System (INIS)

    Trisviatski, L.A.

    1973-01-01

    First the importance of cereals collected in the S.S.S.R., the reason why the government had to put in practice a storage chain, composed of large capacity store houses (200 000 metric tonnes, or more) is reminded. When climatic conditions result in wet harvested grains, cereals are dried either in state enterprise dryers (32 to 50 tonnes/hour) or in kolkhozes' dryers (2 to 16 tonnes/hour). A new type of drying with recycling, has been developped, economizing 10 to 15 p. 100. Then the possibilities offered by the technique of partial drying of very wet grains are studied and the preservation processes using fresh ventilation, or hot ventilation with drying effect are described. The question of silage of wet grains destined to animal consumption is then examined as well as preservation by sodium pyrosulfide; the use of propionic acid, little developped in SSSR, is studied now, just as storage with inert gas. The struggle technics against insects, either with chemical agents, or with irradiation are described. Finally the modalities of technicians formation, specialized in preservation, are discussed [fr

  15. Chinese Parents and English Education.

    Science.gov (United States)

    Ghuman, P.; Wong, R.

    1989-01-01

    Interviews of 34 Chinese families in Manchester, England, ascertained their views on their children's schooling. These parents have little knowledge of English and the school system. They value education highly, would like more homework and discipline, and would like the schools' help in preserving their language and culture. (SK)

  16. Targeting Therapy Resistant Tumor Vessels

    Science.gov (United States)

    2008-08-01

    Morris LS. Hysterectomy vs. resectoscopic endometrial ablation for the control of abnormal uterine bleeding . A cost-comparative study. J Reprod Med 1994;39...after the antibody treatment contain a pericyte coat, vessel architecture is normal, the diameter of the vessels is smaller (dilated, abnormal vessels...involvement of proteases from inflammatory mast cells and functionally abnormal (Carmeliet and Jain, 2000; Pasqualini (Coussens et al., 1999) and other bone

  17. The vessel fluence; Fluence cuve

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    This book presents the proceedings of the technical meeting on the reactors vessels fluence. They are grouped in eight sessions: the industrial context and the stakes of the vessels control; the organization and the methodology for the fluence computation; the concerned physical properties; the reference computation methods; the fluence monitoring in an industrial context; vessels monitoring under irradiation; others methods in the world; the research and development programs. (A.L.B.)

  18. Americium behaviour in plastic vessels

    International Nuclear Information System (INIS)

    Legarda, F.; Herranz, M.; Idoeta, R.; Abelairas, A.

    2010-01-01

    The adsorption of 241 Am dissolved in water in different plastic storage vessels was determined. Three different plastics were investigated with natural and distilled waters and the retention of 241 Am by these plastics was studied. The same was done by varying vessel agitation time, vessel agitation speed, surface/volume ratio of water in the vessels and water pH. Adsorptions were measured to be between 0% and 70%. The adsorption of 241 Am is minimized with no water agitation, with PET or PVC plastics, and by water acidification.

  19. Americium behaviour in plastic vessels

    Energy Technology Data Exchange (ETDEWEB)

    Legarda, F.; Herranz, M. [Departamento de Ingenieria Nuclear y Mecanica de Fluidos, Escuela Tecnica Superior de Ingenieria de Bilbao, Universidad del Pais Vasco (UPV/EHU), Alameda de Urquijo s/n, 48013 Bilbao (Spain); Idoeta, R., E-mail: raquel.idoeta@ehu.e [Departamento de Ingenieria Nuclear y Mecanica de Fluidos, Escuela Tecnica Superior de Ingenieria de Bilbao, Universidad del Pais Vasco (UPV/EHU), Alameda de Urquijo s/n, 48013 Bilbao (Spain); Abelairas, A. [Departamento de Ingenieria Nuclear y Mecanica de Fluidos, Escuela Tecnica Superior de Ingenieria de Bilbao, Universidad del Pais Vasco (UPV/EHU), Alameda de Urquijo s/n, 48013 Bilbao (Spain)

    2010-07-15

    The adsorption of {sup 241}Am dissolved in water in different plastic storage vessels was determined. Three different plastics were investigated with natural and distilled waters and the retention of {sup 241}Am by these plastics was studied. The same was done by varying vessel agitation time, vessel agitation speed, surface/volume ratio of water in the vessels and water pH. Adsorptions were measured to be between 0% and 70%. The adsorption of {sup 241}Am is minimized with no water agitation, with PET or PVC plastics, and by water acidification.

  20. Americium behaviour in plastic vessels.

    Science.gov (United States)

    Legarda, F; Herranz, M; Idoeta, R; Abelairas, A

    2010-01-01

    The adsorption of (241)Am dissolved in water in different plastic storage vessels was determined. Three different plastics were investigated with natural and distilled waters and the retention of (241)Am by these plastics was studied. The same was done by varying vessel agitation time, vessel agitation speed, surface/volume ratio of water in the vessels and water pH. Adsorptions were measured to be between 0% and 70%. The adsorption of (241)Am is minimized with no water agitation, with PET or PVC plastics, and by water acidification. Copyright 2009 Elsevier Ltd. All rights reserved.

  1. Superior long term outcome associated with native vessel versus graft vessel PCI following secondary PCI in patients with prior CABG.

    Science.gov (United States)

    Mavroudis, Chrysostomos A; Kotecha, Tushar; Chehab, Omar; Hudson, Jonathan; Rakhit, Roby D

    2017-02-01

    Secondary percutaneous coronary intervention (PCI) in patients with prior coronary artery bypass graft surgery is increasingly common. Graft vessel PCI has higher rates of adverse events compared with native coronary vessel PCI. To investigate the clinical outcomes of patients with prior CABG who underwent secondary PCI of either a graft vessel (GV), a native coronary vessel (NV) or both graft and native (NG) vessels. 220 patients (84% male) who underwent PCI in our institution to either GV (n=89), NV (n=103) or both GV and NV (NG group) (n=28) were studied. The study population underwent 378 procedures (GV group; n=126, NV group; n=164 and NG group; n=88). Median follow up was for 36months [range 2-75months]. Target vessel revascularisation (TVR) occurred in 12.5% of the GV group and 3.6% in the NV group [p=0.0004], and was predominantly due to in-stent restenosis. Patients who had PCI due to TVR were more likely to suffer from diabetes and peripheral vascular disease. History of chronic renal failure was associated with higher risk (HR 2.21, p=0.005) whereas preserved left ventricular ejection fraction (LVEF) with lower risk (HR 0.17, p=0.0007) of death. The median survival (interval between CABG and end of follow-up period) was lower in the GV compared with the NV group (315 vs 372months p=0.005). This registry demonstrates inferior long term outcome for patients undergoing secondary PCI of GV versus NV. Where possible, a strategy of NV rather than GV target PCI should be considered in patients with prior CABG. Secondary PCI in patients with prior CABG surgery is increasingly common. Graft vessel PCI has inferior outcomes with high rates of restenosis and occlusion compared with native coronary vessel PCI. We studied the clinical outcomes of 220 patients with prior CABG who underwent secondary PCI to either a graft vessel (GV), a native coronary vessel (NV) or both graft and native (NG) vessels. Target vessel revascularisation was 5 times higher in the GV

  2. Training development for pavement preservation.

    Science.gov (United States)

    2013-05-01

    This research project strives to help the Iowa Department of Transportation (DOT) fully achieve the full benefits of pavement : preservation through training on proper selection, design, and application of pavement preservation treatments. In some ca...

  3. ACHP | Tribal Historic Preservation Officers

    Science.gov (United States)

    preservation of significant historic properties. Those functions include identifying and maintaining Working with Section 106 Federal, State, & Tribal Programs Training & Education Publications Search skip specific nav links Home arrow Historic Preservation Programs & Officers arrow THPOs

  4. [Large vessel vasculitides].

    Science.gov (United States)

    Morović-Vergles, Jadranka; Puksić, Silva; Gracanin, Ana Gudelj

    2013-01-01

    Large vessel vasculitis includes Giant cell arteritis and Takayasu arteritis. Giant cell arteritis is the most common form of vasculitis affect patients aged 50 years or over. The diagnosis should be considered in older patients who present with new onset of headache, visual disturbance, polymyalgia rheumatica and/or fever unknown cause. Glucocorticoides remain the cornerstone of therapy. Takayasu arteritis is a chronic panarteritis of the aorta ant its major branches presenting commonly in young ages. Although all large arteries can be affected, the aorta, subclavian and carotid arteries are most commonly involved. The most common symptoms included upper extremity claudication, hypertension, pain over the carotid arteries (carotidynia), dizziness and visual disturbances. Early diagnosis and treatment has improved the outcome in patients with TA.

  5. Reactor pressure vessel embrittlement

    International Nuclear Information System (INIS)

    1992-07-01

    Within the framework of the IAEA extrabudgetary programme on the Safety of WWER-440/230 NPPs, a list of safety issues requiring broad studies of generic interest have been agreed upon by an Advisory Group who met in Vienna in September 1990. The list was later revised in the light of the programme findings. The information on the status of the issues, and on the amount of work already completed and under way in the various countries, needs to be compiled. Moreover, an evaluation of what further work is required to resolve each one of the issues is also necessary. In view of this, the IAEA has started the preparation of a series of status reports on the various issues. This report on the generic safety issue ''Reactor Pressure Vessel Embrittlement'' presents a comprehensive survey of technical information available in the field and identifies those aspects which require further investigation. 39 refs, 21 figs, 4 tabs

  6. Reactor containment vessel

    International Nuclear Information System (INIS)

    Ochiai, Kanehiro; Hayagumo, Sunao; Morikawa, Matsuo.

    1981-01-01

    Purpose: To safety and simplify the structure in a reactor containment vessel. Constitution: Steam flow channels with steam jetting ports communicating to coolants are provided between a communication channel and coolants in a pressure suppression chamber. Upon loss of coolant accidents, pressure in a dry well will increase, then force downwards water in an annulus portion and further flow out the water through steam jetting ports into a suppression pool. Thus, the steam flow channel is filled with steams or airs present in the dry well, which are released through the steam jetting ports into the pressure suppression chamber. Even though water is violently vibrated owing to the upward movement of air bubbles and condensation of steam bubbles, the annular portion and the steam jetting ports are filled with steams or the like, direct dynamic loads onto the structures such as communication channels can be avoided. (J.P.N.)

  7. Preservative treatments for building components

    Science.gov (United States)

    Stan Lebow

    2007-01-01

    The wood species most commonly used in construction have little natural durability Thus, they are treated with preservatives when used in conditions that favor biodeterioration. The type of preservative used varies with the type of wood product, exposure condition, and specific agent of deterioration. This paper discusses the characteristics of several preservative...

  8. Preserving the Manhattan Project

    Science.gov (United States)

    Kelly, Cynthia

    2014-03-01

    When future generations look back on the 20th century, few events will rival the harnessing of nuclear energy as a turning point in world history, science and society. Yet, the Department of Energy has not always embraced its Manhattan Project origins. The presentation will focus on the progress made over the last 20 years to preserve the properties and first-hand accounts that for decades have been threatened with demolition and indifference. Since the mid-1950s, most remaining Manhattan Project properties at the Los Alamos National Laboratory had been abandoned. Among them was a cluster of wooden buildings called the ``V Site.'' This is where scientists assembled the ``Gadget,'' the world's first atomic device tested on July 16, 1945. Regardless of its significance, the ``V Site'' buildings like all the rest were slated for demolition. The Advisory Council on Historic Preservation (ACHP) toured the properties in November 1998. Most could not believe that the world's first atomic bomb was designed in such humble structures. The properties were declared to be ``monumental in their lack of monumentality.'' A Save America's Treasures grant for 700,000 was awarded to restore the properties. To raise the required matching funds, I left the Federal government and soon founded the Atomic Heritage Foundation. The presentation will trace the progress made over the last decade to generate interest and support nationwide to preserve the Manhattan Project heritage. Saving both the physical properties and first-hand accounts of the men and women have been a priority. Perhaps our most significant achievement may be legislation now under consideration by Congress to create a Manhattan Project National Historical Park. Seventy years later, the Manhattan Project is finally getting the recognition it deserves.

  9. Fertility Preservation in Girls

    Directory of Open Access Journals (Sweden)

    Jennia Michaeli

    2012-01-01

    Full Text Available Children that undergo treatment for cancer are at risk of suffering from subfertility or hormonal dysfunction due to the detrimental effects of radiotherapy and chemotherapeutic agents on the gonads. Cryopreservation of ovarian tissue prior to treatment offers the possibility of restoring gonadal function after resumption of therapy. Effective counseling and management of pediatric patients is crucial for preserving their future reproductive potential. The purpose of this article is to review recent literature and to revise recommendations we made in a 2007 article. Pediatric hemato-oncology, reproductive endocrinology, surgery, anesthesia and bioethics perspectives are discussed and integrated to propose guidelines for offering ovarian cryopreservation to premenarcheal girls with cancer.

  10. Radiation preservation of spices

    International Nuclear Information System (INIS)

    Badshah, A.; Tasnim, A.; Khan, M.; Sattar, A.; Khan, I.

    1989-01-01

    The use of gamma irradiation for preservation of red hot pepper has been explained in report, as it can kill the harmful organisms without altering the organolpetic properties. The sample were dried and reduced to pass through 20 mesh. The samples were irradiated at different dose levels of 0, 2.5, 5.0, 7.5 and 10.0 KGy and results have been shown after different time intervals. Radiation and packaging treatments resulted normaly no effect on the color of dry fruits. (A.B)

  11. Preserving Transactional Data

    OpenAIRE

    Sara Day Thomson

    2017-01-01

    This paper is an adaptation of a longer report commissioned by the UK Data Service. The longer report contributes to on-going support for the Big Data Network – a programme funded by the Economic and Social Research Council (ESRC). The longer report can be found at doi:10.7207/twr16-02. This paper discusses requirements for preserving transactional data and the accompanying challenges facing the companies and institutions who aim to re-use these data for analysis or research. It present...

  12. Reactor dosimetry knowledge preservation and development

    International Nuclear Information System (INIS)

    Ilieva, K.D.; Belousov, S.I.; Mitev, M.R.

    2010-01-01

    The nuclear safety requirements and philosophy have changed by the development of new nuclear systems and this imposes special research and development activity. Reactor dosimetry which is applied for determination of neutron field parameters and neutron flux responses in different regions of the reactor system plays an important role in determining of radiation exposure on reactor system elements as reactor vessel, internals, shielding; dose determination for material damage study; in dose determination and conditioning of irradiation for medicine and industry application as well as in induced activity determination for decommissioning purposes. The management of nuclear knowledge has emerged as a growing challenge in recent years. The need to preserve and transfer nuclear knowledge is compounded by recent trends such as ageing of the nuclear workforce, declining student numbers in nuclear related fields, and the threat of losing accumulated nuclear knowledge. (authors)

  13. Organic preservation of fossil musculature with ultracellular detail.

    Science.gov (United States)

    McNamara, Maria; Orr, Patrick J; Kearns, Stuart L; Alcalá, Luis; Anadón, Pere; Peñalver-Mollá, Enrique

    2010-02-07

    The very labile (decay-prone), non-biomineralized, tissues of organisms are rarely fossilized. Occurrences thereof are invaluable supplements to a body fossil record dominated by biomineralized tissues, which alone are extremely unrepresentative of diversity in modern and ancient ecosystems. Fossil examples of extremely labile tissues (e.g. muscle) that exhibit a high degree of morphological fidelity are almost invariably replicated by inorganic compounds such as calcium phosphate. There is no consensus as to whether such tissues can be preserved with similar morphological fidelity as organic remains, except when enclosed inside amber. Here, we report fossilized musculature from an approximately 18 Myr old salamander from lacustrine sediments of Ribesalbes, Spain. The muscle is preserved organically, in three dimensions, and with the highest fidelity of morphological preservation yet documented from the fossil record. Preserved ultrastructural details include myofilaments, endomysium, layering within the sarcolemma, and endomysial circulatory vessels infilled with blood. Slight differences between the fossil tissues and their counterparts in extant amphibians reflect limited degradation during fossilization. Our results provide unequivocal evidence that high-fidelity organic preservation of extremely labile tissues is not only feasible, but likely to be common. This is supported by the discovery of similarly preserved tissues in the Eocene Grube Messel biota.

  14. Pressure vessel for nuclear reactors

    International Nuclear Information System (INIS)

    1975-01-01

    The invention applies to a pressure vessel for nuclear reactors whose shell, made of cast metal segments, has a steel liner. This liner must be constructed to withstand all operational stresses and to be easily repairable. The invention solves this problem by installing the liner at a certain distance from the inner wall of the pressure vessel shell and by filling this clearance with supporting concrete. Both the concrete and the steel liner must have a lower prestress than the pressure vessel shell. In order to avoid damage to the liner when prestressing the pressure vessel shell, special connecting elements are provided which consist of welded-on fastening elements projecting into recesses in the cast metal segments of the pressure vessel. Their design is described in detail. (TK) [de

  15. Mutual preservation of entanglement

    International Nuclear Information System (INIS)

    Veitia, Andrzej; Jing, Jun; Yu, Ting; Wong, Chee Wei

    2012-01-01

    We study a generalized double Jaynes–Cummings (JC) model where two entangled pairs of two-level atoms interact indirectly. We show that there exist initial states of the qubit system so that two entangled pairs are available at all times. In particular, the minimum entanglement in the pairs as a function of the initial state is studied. Finally, we extend our findings to a model consisting of multi-mode atom–cavity interactions. We use a non-Markovian quantum state diffusion (QSD) equation to obtain the steady-state density matrix for the qubits. We show that the multi-mode model also displays dynamical preservation of entanglement. -- Highlights: ► Entanglement dynamics is studied in a generalized double Jaynes–Cummings model. ► We show that for certain initial states, the atoms remain entangled at all times. ► We extend the results to the case of multi-mode atom–cavity interactions. ► The model suggest that indirect interaction may help to preserve entanglement.

  16. Containment vessel stability analysis

    International Nuclear Information System (INIS)

    Harstead, G.A.; Morris, N.F.; Unsal, A.I.

    1983-01-01

    The stability analysis for a steel containment shell is presented herein. The containment is a freestanding shell consisting of a vertical cylinder with a hemispherical dome. It is stiffened by large ring stiffeners and relatively small longitudinal stiffeners. The containment vessel is subjected to both static and dynamic loads which can cause buckling. These loads must be combined prior to their use in a stability analysis. The buckling loads were computed with the aid of the ASME Code case N-284 used in conjunction with general purpose computer codes and in-house programs. The equations contained in the Code case were used to compute the knockdown factors due to shell imperfections. After these knockdown factors were applied to the critical stress states determined by freezing the maximum dynamic stresses and combining them with other static stresses, a linear bifurcation analysis was carried out with the aid of the BOSOR4 program. Since the containment shell contained large penetrations, the Code case had to be supplemented by a local buckling analysis of the shell area surrounding the largest penetration. This analysis was carried out with the aid of the NASTRAN program. Although the factor of safety against buckling obtained in this analysis was satisfactory, it is claimed that the use of the Code case knockdown factors are unduly conservative when applied to the analysis of buckling around penetrations. (orig.)

  17. Pressure vessel design

    International Nuclear Information System (INIS)

    Annaratone, D.

    2007-01-01

    This book guides through general and fundamental problems of pressure vessel design. It moreover considers problems which seem to be of lower importance but which turn out to be crucial in the design phase. The basic approach is rigorously scientific with a complete theoretical development of the topics treated, but the analysis is always pushed so far as to offer concrete and precise calculation criteria that can be immediately applied to actual designs. This is accomplished through appropriate algorithms that lead to final equations or to characteristic parameters defined through mathematical equations. The first chapter describes how to achieve verification criteria, the second analyzes a few general problems, such as stresses of the membrane in revolution solids and edge effects. The third chapter deals with cylinders under pressure from the inside, while the fourth focuses on cylinders under pressure from the outside. The fifth chapter covers spheres, and the sixth is about all types of heads. Chapter seven discusses different components of particular shape as well as pipes, with special attention to flanges. The eighth chapter discusses the influence of holes, while the ninth is devoted to the influence of supports. Finally, chapter ten illustrates the fundamental criteria regarding fatigue analysis. Besides the unique approach to the entire work, original contributions can be found in most chapters, thanks to the author's numerous publications on the topic and to studies performed ad hoc for this book. (orig.)

  18. Effect of blood vessels on light distribution in optogenetic stimulation of cortex.

    Science.gov (United States)

    Azimipour, Mehdi; Atry, Farid; Pashaie, Ramin

    2015-05-15

    In this Letter, the impact of blood vessels on light distribution during photostimulation of cortical tissue in small rodents is investigated. Brain optical properties were extracted using a double-integrating sphere setup, and optical coherence tomography was used to image cortical vessels and capillaries to generate a three-dimensional angiogram of the cortex. By combining these two datasets, a complete volumetric structure of the cortical tissue was developed and linked to a Monte Carlo code which simulates light propagation in this inhomogeneous structure and illustrates the effect of blood vessels on the penetration depth and pattern preservation in optogenetic stimulation.

  19. Preserving reptiles for research

    Science.gov (United States)

    Gotte, Steve W.; Jacobs, Jeremy F.; Zug, George R.; Dodd, C. Kenneth

    2016-01-01

    What are voucher specimens and why do we collect them? Voucher specimens are animals and/or their parts that are deposited in a research museum to document the occurrence of a taxon at a specific location in space and time (Pleijel et al., 2008; Reynolds and McDiarmid, 2012). For field biologists, vouchers are the repeatable element of a field study as they allow other biologists, now and in the future, to confirm the identity of species that were studied. The scientific importance of a voucher specimen or series of specimens is that other people are afforded the opportunity to examine the entire animal and confirm or correct identifications. A photographic record is somewhat useful for recording the occurrence of a species, but such records can be insufficient for reliable confirmation of specific identity. Even if a photo shows diagnostic characters of currently recognized taxa, it may not show characters that separate taxa that may be described in the future. Substantial cryptic biodiversity is being found in even relatively well-known herpetofaunas (Crawford et al., 2010), and specimens allow researchers to retroactively evaluate the true diversity in a study as understanding of taxonomy evolves. They enable biologists to study the systematic relationships of populations by quantifying variation in different traits. Specimens are also a source of biological data such as behaviour, ecology, epidemiology, and reproduction through examination of their anatomy, reproductive and digestive tracts, and parasites (Suarez and Tsutsui, 2004). Preserving reptiles as vouchers is not difficult, although doing it properly requires care, effort, and time. Poorly preserved vouchers can invalidate the results and conclusions of your study because of the inability to confirm the identity of your study animals. Good science requires repeatability of observations, and the absence of vouchers or poorly preserved ones prevents such confirmation. Due to space restrictions, we are

  20. “Data characterizing microfabricated human blood vessels created via hydrodynamic focusing”

    Directory of Open Access Journals (Sweden)

    Kyle A. DiVito

    2017-10-01

    Full Text Available This data article provides further detailed information related to our research article titled “Microfabricated Blood Vessels Undergo Neovascularization” (DiVito et al., 2017 [1], in which we report fabrication of human blood vessels using hydrodynamic focusing (HDF. Hydrodynamic focusing with advection inducing chevrons were used in concert to encase one fluid stream within another, shaping the inner core fluid into ‘bullseye-like” cross-sections that were preserved through click photochemistry producing streams of cellularized hollow 3-dimensional assemblies, such as human blood vessels (Daniele et al., 2015a, 2015b, 2014, 2016; Roberts et al., 2016 [2–6]. Applications for fabricated blood vessels span general tissue engineering to organ-on-chip technologies, with specific utility in in vitro drug delivery and pharmacodynamics studies. Here, we report data regarding the construction of blood vessels including cellular composition and cell positioning within the engineered vascular construct as well as functional aspects of the tissues.

  1. PWR vessel flaw distribution development

    International Nuclear Information System (INIS)

    Rosinski, S.T.; Kennedy, E.L.; Foulds, J.R.; Kinsman, K.M.

    1990-01-01

    This paper reports on PWR pressure vessels which operate under NRC rules and regulatory guides intended to prevent failure of the vessels. Plants failing to meet the operating criteria specified under these rules and regulations are required to analytically demonstrate fitness for service in order to continue operation. The initial flaw size or distribution of initial vessel flaws is a key input to the required vessel integrity analyses. However, the flaw distribution assumed in the development of the NRC Regulations and recommended for the plant specific analyses is potentially over-conservative. This is because the distribution is based on the limited amount of vessel inspection data available at the time the criteria were being developed and does not take full advantage of the more recent and reliable domestic vessel inspection results. The U.S. Department of Energy is funding an effort through Sandia National Laboratories to investigate the possibility of developing a new flaw distribution based on the increased amount and improved reliability of domestic vessel inspection data. Results of Phase I of the program indicate that state-of-the-art NDE systems' capabilities are sufficient for development of a new flaw distribution that could ultimately provide life extension benefits over the presently required operating practice

  2. Nuclear reactor vessel decontamination systems

    International Nuclear Information System (INIS)

    McGuire, P. J.

    1985-01-01

    There is disclosed in the present application, a decontamination system for reactor vessels. The system is operatable without entry by personnel into the contaminated vessel before the decontamination operation is carried out and comprises an assembly which is introduced into the vertical cylindrical vessel of the typical boiling water reactor through the open top. The assembly includes a circular track which is centered by guideways permanently installed in the reactor vessel and the track guides opposed pairs of nozzles through which water under very high pressure is directed at the wall for progressively cutting and sweeping a tenacious radioactive coating as the nozzles are driven around the track in close proximity to the vessel wall. The whole assembly is hoisted to a level above the top of the vessel by a crane, outboard slides on the assembly brought into engagement with the permanent guideways and the assembly progressively lowered in the vessel as the decontamination operation progresses. The assembly also includes a low pressure nozzle which forms a spray umbrella above the high pressure nozzles to contain radioactive particles dislodged during the decontamination

  3. Food preservation by irradiation

    International Nuclear Information System (INIS)

    Gottschalk, M.

    1978-01-01

    In November, 1977, an International Symposium on Food Preservation by Irradiation was held at Wageningen, the Netherlands. About 200 participants attended the Symposium which was organised by the International Atomic Energy Agency, the Food and Agriculture Organization of the United Nations and the World Health Organization; a reflection of the active interest which is being shown in food irradiation processing, particularly among developing countries. The 75 papers presented provided an excellent review of the current status of food irradiation on a wide range of different topics, and the Symposium also afforded the valuable opportunity for informal discussion among the participants and for developing personal contacts. A brief survey of the salient aspects discussed during the course of the meeting are reported on. (orig.) [de

  4. Gammatography of thick lead vessels

    International Nuclear Information System (INIS)

    Raghunath, V.M.; Bhatnagar, P.K.; Sundaram, V.M.

    1979-01-01

    Radiography, scintillation and GM counting and dose measurements using ionisation chamber equipment are commonly used for detecting flaws/voids in materials. The first method is mostly used for steel vessels and to a lesser extent thin lead vessels also and is essentially qualitative. Dose measuring techniques are used for very thick and large lead vessels for which high strength radioactive sources are required, with its inherent handling problems. For vessels of intermediate thicknesses, it is ideal to use a small strength source and a GM or scintillation counter assembly. At the Reactor Research Centre, Kalpakkam, such a system was used for checking three lead vessels of thicknesses varying from 38mm to 65mm. The tolerances specified were +- 4% variation in lead thickness. The measurements also revealed the non concentricity of one vessel which had a thickness varying from 38mm to 44mm. The second vessel was patently non-concentric and the dimensional variation was truly reproduced in the measurements. A third vessel was fabricated with careful control of dimensions and the measurements exhibited good concentricity. Small deviations were observed, attributable to imperfect bondings between steel and lead. This technique has the following advantages: (a) weaker sources used result in less handling problems reducing the personnel exposures considerably; (b) the sensitivity of the instrument is quite good because of better statistics; (c) the time required for scanning a small vessel is more, but a judicious use of a scintillometer for initial fast scan will help in reducing the total scanning time; (d) this method can take advantage of the dimensional variations themselves to get the calibration and to estimate the deviations from specified tolerances. (auth.)

  5. Fertility Preservation for Children Diagnosed with Cancer

    Medline Plus

    Full Text Available ... Provider Pocket Guides Provider Guides Fertility Preservation for Women Diagnosed with Cancer Fertility Preservation for Men Diagnosed ... Patient Pocket Guides Patient Guides Fertility Preservation for Women Diagnosed with Cancer Fertility Preservation for Men Diagnosed ...

  6. Fertility Preservation for Children Diagnosed with Cancer

    Medline Plus

    Full Text Available ... for Women Diagnosed with Cancer Fertility Preservation for Men Diagnosed with Cancer Fertility Preservation for Children Diagnosed ... for Women Diagnosed with Cancer Fertility Preservation for Men Diagnosed with Cancer Fertility Preservation for Children Diagnosed ...

  7. BY FRUSTUM CONFINING VESSEL

    Directory of Open Access Journals (Sweden)

    Javad Khazaei

    2016-09-01

    Full Text Available Helical piles are environmentally friendly and economical deep foundations that, due to environmental considerations, are excellent additions to a variety of deep foundation alternatives available to the practitioner. Helical piles performance depends on soil properties, the pile geometry and soil-pile interaction. Helical piles can be a proper alternative in sensitive environmental sites if their bearing capacity is sufficient to support applied loads. The failure capacity of helical piles in this study was measured via an experimental research program that was carried out by Frustum Confining Vessel (FCV. FCV is a frustum chamber by approximately linear increase in vertical and lateral stresses along depth from top to bottom. Due to special geometry and applied bottom pressure, this apparatus is a proper choice to test small model piles which can simulate field stress conditions. Small scale helical piles are made with either single helix or more helixes and installed in fine grained sand with three various densities. Axial loading tests including compression and tension tests were performed to achieve pile ultimate capacity. The results indicate the helical piles behavior depends essentially on pile geometric characteristics, i.e. helix configuration and soil properties. According to the achievements, axial uplift capacity of helical model piles is about equal to usual steel model piles that have the helixes diameter. Helical pile compression bearing capacity is too sufficient to act as a medium pile, thus it can be substituted other piles in special geoenvironmental conditions. The bearing capacity also depends on spacing ratio, S/D, and helixes diameter.

  8. Vacuum vessel for thermonuclear device

    International Nuclear Information System (INIS)

    Hagiwara, Koji; Imura, Yasuya.

    1979-01-01

    Purpose: To provide constituted method for easily performing baking of vacuum vessel, using short-circuiting segments. Constitution: At the time of baking, one turn circuit is formed by the vacuum vessel and short-circuiting segments, and current transformer converting the one turn circuit into a secondary circuit by the primary coil and iron core is formed, and the vacuum vessel is Joule heated by an induction current from the primary coil. After completion of baking, the short-circuiting segments are removed. (Kamimura, M.)

  9. PWR vessel inspection performance improvements

    International Nuclear Information System (INIS)

    Blair Fairbrother, D.; Bodson, Francis

    1998-01-01

    A compact robot for ultrasonic inspection of reactor vessels has been developed that reduces setup logistics and schedule time for mandatory code inspections. Rather than installing a large structure to access the entire weld inspection area from its flange attachment, the compact robot examines welds in overlapping patches from a suction cup anchor to the shell wall. The compact robot size allows two robots to be operated in the vessel simultaneously. This significantly reduces the time required to complete the inspection. Experience to date indicates that time for vessel examinations can be reduced to fewer than four days. (author)

  10. Special enclosure for a pressure vessel

    International Nuclear Information System (INIS)

    Wedellsborg, B.W.; Wedellsborg, U.W.

    1993-01-01

    A pressure vessel enclosure is described comprising a primary pressure vessel, a first pressure vessel containment assembly adapted to enclose said primary pressure vessel and be spaced apart therefrom, a first upper pressure vessel jacket adapted to enclose the upper half of said first pressure vessel containment assembly and be spaced apart therefrom, said upper pressure vessel jacket having an upper rim and a lower rim, each of said rims connected in a slidable relationship to the outer surface of said first pressure vessel containment assembly, mean for connecting in a sealable relationship said upper rim of said first upper pressure vessel jacket to the outer surface of said first pressure vessel containment assembly, means for connecting in a sealable relationship said lower rim of said first upper pressure vessel jacket to the outer surface of said first pressure vessel containment assembly, a first lower pressure vessel jacket adapted to enclose the lower half of said first pressure vessel containment assembly and be spaced apart therefrom, said lower pressure vessel jacket having an upper rim connected in a slidable relationship to the outer surface of said first pressure vessel containment assembly, and means for connecting in a sealable relationship said upper rim of said first lower pressure vessel jacket to the outer surface of said first pressure vessel containment assembly, a second upper pressure vessel jacket adapted to enclose said first upper pressure vessel jacket and be spaced apart therefrom, said second upper pressure vessel jacket having an upper rim and a lower rim, each of said rims adapted to slidably engage the outer surface of said first upper pressure vessel jacket, means for sealing said rims, a second lower pressure vessel jacket adapted to enclose said first lower pressure vessel jacket and be spaced apart therefrom

  11. Status Report on Ex-Vessel Coolability and Water Management

    Energy Technology Data Exchange (ETDEWEB)

    Farmer, M. T. [Argonne National Lab. (ANL), Argonne, IL (United States). Nuclear Engineering Division; Robb, K. R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2016-09-15

    Specific to BWR plants, current accident management guidance calls for flooding the drywell to a level of approximately 1.2 m (4 feet) above the drywell floor once vessel breach has been determined. While this action can help to submerge ex-vessel core debris, it can also result in flooding the wetwell and thereby rendering the wetwell vent path unavailable. An alternate strategy is being developed in the industry guidance for responding to the severe accident capable vent Order, EA-13-109. The alternate strategy being proposed would throttle the flooding rate to achieve a stable wetwell water level while preserving the wetwell vent path. The overall objective of this work is to upgrade existing analytical tools (i.e. MELTSPREAD and CORQUENCH - which have been used as part of the DOE-sponsored Fukushima accident analyses) in order to provide flexible, analytically capable, and validated models to support the development of water throttling strategies for BWRs that are aimed at keeping ex-vessel core debris covered with water while preserving the wetwell vent path.

  12. Parenting Seminars for Divorcing Parents.

    Science.gov (United States)

    Frieman, Barry B.

    1995-01-01

    Profiles the parenting seminars and counseling services for divorcing parents offered by the Children of Separation and Divorce Center, a community service agency in Maryland. The seminars are designed to help parents adjust to divorce and understand the needs of their children during and after the divorce process. (MDM)

  13. Preserving Employee Privacy in Wellness.

    Science.gov (United States)

    Terry, Paul E

    2017-07-01

    The proposed "Preserving Employee Wellness Programs Act" states that the collection of information about the manifested disease or disorder of a family member shall not be considered an unlawful acquisition of genetic information. The bill recognizes employee privacy protections that are already in place and includes specific language relating to nondiscrimination based on illness. Why did legislation expressly intending to "preserve wellness programs" generate such antipathy about wellness among journalists? This article argues that those who are committed to preserving employee wellness must be equally committed to preserving employee privacy. Related to this, we should better parse between discussions and rules about commonplace health screenings versus much less common genetic testing.

  14. 2013 West Coast Vessel Tracklines

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Automatic Identification Systems (AIS) are a navigation safety device that transmits and monitors the location and characteristics of many vessels in U.S. and...

  15. 2011 West Coast Vessel Tracklines

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Automatic Identification Systems (AIS) are a navigation safety device that transmits and monitors the location and characteristics of many vessels in U.S. and...

  16. 2013 Great Lakes Vessel Tracklines

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Automatic Identification Systems (AIS) are a navigation safety device that transmits and monitors the location and characteristics of many vessels in U.S. and...

  17. 2011 Great Lakes Vessel Tracklines

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Automatic Identification Systems (AIS) are a navigation safety device that transmits and monitors the location and characteristics of many vessels in U.S. and...

  18. 2011 East Coast Vessel Tracklines

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Automatic Identification Systems (AIS) are a navigation safety device that transmits and monitors the location and characteristics of many vessels in U.S. and...

  19. Coastal Discard Logbook Survey (Vessels)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains data on the type and amount of marine resources that are discarded or interacted with by vessels that are selected to report to the Southeast...

  20. SC/OQ Vessel Database

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Data tables holding information for the Surf Clam/Ocean Quahog vessel and dealer/processor logbooks (negative and positive), as well as individual tag information...

  1. Vessel Permit System Data Set

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — GARFO issues federal fishing permits annually to owners of fishing vessels who fish in the Greater Atlantic region, as required by federal regulation. These permits...

  2. Reactor pressure vessel status report

    International Nuclear Information System (INIS)

    Strosnider, J.; Wichman, K.; Elliot, B.

    1994-12-01

    This report gives a brief description of the reactor pressure vessel (RPV), followed by a discussion of the radiation embrittlement of RPV beltline materials and the two indicators for measuring embrittlement, the end-of-license (EOL) reference temperature and the EOL upper-shelf energy. It also summarizes the GL 92-01 effort and presents, for all 37 boiling water reactor plants and 74 pressurized water reactor plants in the United States, the current status of compliance with regulatory requirements related to ensuring RPV integrity. The staff has evaluated the material data needed to predict neutron embrittlement of the reactor vessel beltline materials. These data will be stored in a computer database entitled the reactor vessel integrity database (RVID). This database will be updated annually to reflect the changes made by the licensees in future submittals and will be used by the NRC staff to assess the issues related to vessel structural integrity

  3. Reactor-vessel-sectioning demonstration

    International Nuclear Information System (INIS)

    Lundgren, R.A.

    1981-07-01

    A successful technical demonstration of simulated reactor vessel sectioning was completed using the combined techniques of air arc gouging and flame cutting. A 4-ft x 3-ft x 9-in. thick sample was fabricated of A36 carbon steel to simulate a reactor vessel wall. A 1/4-in layer of stainless steel (SS) was tungsten inert gas (TIG)-welded to the carbon steel. Several techniques were considered to section the simulated reactor vessel: an air arc gouger was chosen to penetrate the stainless steel, and flame cutting was selected to sever the carbon steel. After the simulated vessel was successfully cut from the SS side, another cut was made, starting from the carbon steel side. This cut was also successful. Cutting from the carbon steel side has the advantages of cost reduction since the air arc gouging step is eliminated and contamination controlled because the molten metal is blown inward

  4. Power reactor pressure vessel benchmarks

    International Nuclear Information System (INIS)

    Rahn, F.J.

    1978-01-01

    A review is given of the current status of experimental and calculational benchmarks for use in understanding the radiation embrittlement effects in the pressure vessels of operating light water power reactors. The requirements of such benchmarks for application to pressure vessel dosimetry are stated. Recent developments in active and passive neutron detectors sensitive in the ranges of importance to embrittlement studies are summarized and recommendations for improvements in the benchmark are made. (author)

  5. Prosopomorphic vessels from Moesia Superior

    Directory of Open Access Journals (Sweden)

    Nikolić Snežana

    2008-01-01

    Full Text Available The prosopomorphic vessels from Moesia Superior had the form of beakers varying in outline but similar in size. They were wheel-thrown, mould-made or manufactured by using a combination of wheel-throwing and mould-made appliqués. Given that face vessels are considerably scarcer than other kinds of pottery, more than fifty finds from Moesia Superior make an enviable collection. In this and other provinces face vessels have been recovered from military camps, civilian settlements and necropolises, which suggests that they served more than one purpose. It is generally accepted that the faces-masks gave a protective role to the vessels, be it to protect the deceased or the family, their house and possessions. More than forty of all known finds from Moesia Superior come from Viminacium, a half of that number from necropolises. Although tangible evidence is lacking, there must have been several local workshops producing face vessels. The number and technological characteristics of the discovered vessels suggest that one of the workshops is likely to have been at Viminacium, an important pottery-making centre in the second and third centuries.

  6. Vacuum vessel for thermonuclear device

    International Nuclear Information System (INIS)

    Kikuchi, Mitsuru; Kurita, Gen-ichi; Onozuka, Masaki; Suzuki, Masaru.

    1997-01-01

    Heat of inner walls of a vacuum vessel that receive radiation heat from plasmas by way of first walls is removed by a cooling medium flowing in channels for cooling the inner walls. Nuclear heat generation of constitutional materials of the vacuum vessel caused by fast neutrons and γ rays is removed by a cooling medium flowing in cooling channels disposed in the vacuum vessel. Since the heat from plasmas and the nuclear heat generation are removed separately, the amount of the cooling medium flowing in the channels for cooling inner walls is increased for cooling a great amount of heat from plasmas while the amount of the cooling medium flowing in the channels for cooling the inside of the vacuum vessel is reduced for cooling the small amount of nuclear heat generation. Since the amount of the cooling medium can thus be optimized, the capacity of the facilities for circulating the cooling medium can be reduced. In addition, since the channels for cooling the inner walls and the channels of cooling medium formed in the vacuum vessel are disposed to the inner walls of the vacuum vessel on the side opposite to plasmas, integrity of the channels relative to leakage of the cooling medium can be ensured. (N.H.)

  7. Vacuum vessel for thermonuclear device

    Energy Technology Data Exchange (ETDEWEB)

    Kikuchi, Mitsuru; Kurita, Gen-ichi [Japan Atomic Energy Research Inst., Tokyo (Japan); Onozuka, Masaki; Suzuki, Masaru

    1997-07-31

    Heat of inner walls of a vacuum vessel that receive radiation heat from plasmas by way of first walls is removed by a cooling medium flowing in channels for cooling the inner walls. Nuclear heat generation of constitutional materials of the vacuum vessel caused by fast neutrons and {gamma} rays is removed by a cooling medium flowing in cooling channels disposed in the vacuum vessel. Since the heat from plasmas and the nuclear heat generation are removed separately, the amount of the cooling medium flowing in the channels for cooling inner walls is increased for cooling a great amount of heat from plasmas while the amount of the cooling medium flowing in the channels for cooling the inside of the vacuum vessel is reduced for cooling the small amount of nuclear heat generation. Since the amount of the cooling medium can thus be optimized, the capacity of the facilities for circulating the cooling medium can be reduced. In addition, since the channels for cooling the inner walls and the channels of cooling medium formed in the vacuum vessel are disposed to the inner walls of the vacuum vessel on the side opposite to plasmas, integrity of the channels relative to leakage of the cooling medium can be ensured. (N.H.)

  8. Nuclear knowledge preservation

    International Nuclear Information System (INIS)

    Bettencourt, Marcia Pires da Luz

    2009-01-01

    The nuclear technology has encouraged the world development and brought a number of benefits to society. These benefits occurred in important social sectors such as Agriculture, Industry, Health Sciences, Environmental Sciences and the production of energy. The research in the nuclear area is justified, accordingly, as an important factor for science development, technology and innovation. Despite the importance of nuclear energy, there is a collapse in the generation, transmission and sharing of nuclear knowledge. The threat of regression in this area is evidenced by the difficulty of generating new knowledge and practices regarding the maintenance of some critical areas. This project focuses its attention on studying, specifically, the lack of young engineers and technical professionals to replace the older, considered this, an alarming situation. Therefore, it is necessary to identify and record the key skills of experienced workers, through a set of tools to elicitation (capture) this knowledge, as expertise is mainly with people, and is lost when they leave the organization. Against, the Knowledge Management provides methodologies for the process of stimulating the creation, collection and knowledge dissemination process, in order to achieve strategic objectives. This study aims to contribute to the building of a model for the Brazilian nuclear knowledge preservation and, therefore, contributes to the maintenance and innovation of activities in this area. (author)

  9. Palm Vein Verification Using Multiple Features and Locality Preserving Projections

    Directory of Open Access Journals (Sweden)

    Ali Mohsin Al-juboori

    2014-01-01

    Full Text Available Biometrics is defined as identifying people by their physiological characteristic, such as iris pattern, fingerprint, and face, or by some aspects of their behavior, such as voice, signature, and gesture. Considerable attention has been drawn on these issues during the last several decades. And many biometric systems for commercial applications have been successfully developed. Recently, the vein pattern biometric becomes increasingly attractive for its uniqueness, stability, and noninvasiveness. A vein pattern is the physical distribution structure of the blood vessels underneath a person’s skin. The palm vein pattern is very ganglion and it shows a huge number of vessels. The attitude of the palm vein vessels stays in the same location for the whole life and its pattern is definitely unique. In our work, the matching filter method is proposed for the palm vein image enhancement. New palm vein features extraction methods, global feature extracted based on wavelet coefficients and locality preserving projections (WLPP, and local feature based on local binary pattern variance and locality preserving projections (LBPV_LPP have been proposed. Finally, the nearest neighbour matching method has been proposed that verified the test palm vein images. The experimental result shows that the EER to the proposed method is 0.1378%.

  10. User Experience and Heritage Preservation

    Science.gov (United States)

    Orfield, Steven J.; Chapman, J. Wesley; Davis, Nathan

    2011-01-01

    In considering the heritage preservation of higher education campus buildings, much of the attention gravitates toward issues of selection, cost, accuracy, and value, but the model for most preservation projects does not have a clear method of achieving the best solutions for meeting these targets. Instead, it simply relies on the design team and…

  11. Automated method for identification and artery-venous classification of vessel trees in retinal vessel networks.

    Science.gov (United States)

    Joshi, Vinayak S; Reinhardt, Joseph M; Garvin, Mona K; Abramoff, Michael D

    2014-01-01

    The separation of the retinal vessel network into distinct arterial and venous vessel trees is of high interest. We propose an automated method for identification and separation of retinal vessel trees in a retinal color image by converting a vessel segmentation image into a vessel segment map and identifying the individual vessel trees by graph search. Orientation, width, and intensity of each vessel segment are utilized to find the optimal graph of vessel segments. The separated vessel trees are labeled as primary vessel or branches. We utilize the separated vessel trees for arterial-venous (AV) classification, based on the color properties of the vessels in each tree graph. We applied our approach to a dataset of 50 fundus images from 50 subjects. The proposed method resulted in an accuracy of 91.44% correctly classified vessel pixels as either artery or vein. The accuracy of correctly classified major vessel segments was 96.42%.

  12. [Parenting styles].

    Science.gov (United States)

    Torío López, Susana; Peña Calvo, José Vicente; Inda Caro, Mercedes

    2008-02-01

    Parental educational styles constitute one of the key elements of family socialization. The aim of the present essay is to present the results of a research project carried out in the Principality of Asturias (Spain) among 2,965 families with children of infant and primary-school age (5-8 years old). This research attempts to analyse, among other aspects, parental behaviour tendencies in child upbringing. The analysis of the results obtained allows us to: 1) identify the most common attitudinal and behavioural tendencies of parents in the upbringing of their children; 2) determine how many people have a well defined parental style, and delimit their socio-educational characteristics. Lastly, we consider the need to change some parental behaviour patterns and stress the importance of family education programmes, with the aim of promoting appropriate parenting models and modifying or improving current practices.

  13. Adoptive parenting.

    Science.gov (United States)

    Grotevant, Harold D; Lo, Albert Yh

    2017-06-01

    Challenges in adoptive parenting continue to emerge as adoption policies and practices evolve. We review three areas of research in adoptive parenting that reflect contemporary shifts in adoption. First, we highlight recent findings concerning openness in adoption contact arrangements, or contact between a child's families of birth and rearing. Second, we examine research regarding racial and cultural socialization in transracial and international adoptions. Finally, we review investigations of parenting experiences of lesbian and gay adoptive parents. Overall, parenting processes (e.g., supportive vs. problematic family interaction) are better predictors of child adjustment than are group differences (e.g., open vs. closed adoptions; adoption by heterosexual vs. same-sex parents). The distinctive needs of adopted children call for preparation of adoption-competent mental health, casework, education, and health care professionals. Copyright © 2017 Elsevier Ltd. All rights reserved.

  14. Contact dermatitis caused by preservatives.

    Science.gov (United States)

    Yim, Elizabeth; Baquerizo Nole, Katherine L; Tosti, Antonella

    2014-01-01

    Preservatives are biocidal chemicals added to food, cosmetics, and industrial products to prevent the growth of microorganisms. They are usually nontoxic and inexpensive and have a long shelf life. Unfortunately, they commonly cause contact dermatitis. This article reviews the most important classes of preservatives physicians are most likely to encounter in their daily practice, specifically isothiazolinones, formaldehyde and formaldehyde-releasers, iodopropynyl butylcarbamate, methyldibromoglutaronitrile, and parabens. For each preservative mentioned, the prevalence of sensitization, clinical presentation of contact dermatitis, patch testing concentrations, cross reactions, and related legislation will be discussed. Mandatory labeling of preservatives is required in some countries, but not required in others. Until policies are made, physicians and patients must be proactive in identifying potential sensitizers and removing their use. We hope that this article will serve as a guide for policy makers in creating legislation and future regulations on the use and concentration of certain preservatives in cosmetics and industrial products.

  15. The TPX vacuum vessel and in-vessel components

    International Nuclear Information System (INIS)

    Heitzenroeder, P.; Bialek, J.; Ellis, R.; Kessel, C.; Liew, S.

    1994-01-01

    The Tokamak Physics Experiment (TPX) is a superconducting tokamak with double-null diverters. TPX is designed for 1,000-second discharges with the capability of being upgraded to steady state operation. High neutron yields resulting from the long duration discharges require that special consideration be given to materials and maintainability. A unique feature of the TPX is the use of a low activation, titanium alloy vacuum vessel. Double-wall vessel construction is used since it offers an efficient solution for shielding, bakeout and cooling. Contained within the vacuum vessel are the passive coil system, Plasma Facing Components (PFCs), magnetic diagnostics, and the internal control coils. All PFCs utilize carbon-carbon composites for exposed surfaces

  16. Parental Bonding

    Directory of Open Access Journals (Sweden)

    T. Paul de Cock

    2014-08-01

    Full Text Available Estimating the early parent–child bonding relationship can be valuable in research and practice. Retrospective dimensional measures of parental bonding provide a means for assessing the experience of the early parent–child relationship. However, combinations of dimensional scores may provide information that is not readily captured with a dimensional approach. This study was designed to assess the presence of homogeneous groups in the population with similar profiles on parental bonding dimensions. Using a short version of the Parental Bonding Instrument (PBI, three parental bonding dimensions (care, authoritarianism, and overprotection were used to assess the presence of unobserved groups in the population using latent profile analysis. The class solutions were regressed on 23 covariates (demographics, parental psychopathology, loss events, and childhood contextual factors to assess the validity of the class solution. The results indicated four distinct profiles of parental bonding for fathers as well as mothers. Parental bonding profiles were significantly associated with a broad range of covariates. This person-centered approach to parental bonding has broad utility in future research which takes into account the effect of parent–child bonding, especially with regard to “affectionless control” style parenting.

  17. Clay Corner: Recreating Chinese Bronze Vessels.

    Science.gov (United States)

    Gamble, Harriet

    1998-01-01

    Presents a lesson where students make faux Chinese bronze vessels through slab or coil clay construction after they learn about the history, function, and design of these vessels. Utilizes a variety of glaze finishes in order to give the vessels an aged look. Gives detailed guidelines for creating the vessels. (CMK)

  18. Vacuum vessel for thermonuclear device

    International Nuclear Information System (INIS)

    Kikuchi, Mitsuru; Nagashima, Keisuke; Suzuki, Masaru; Onozuka, Masaki.

    1997-01-01

    A vacuum vessel main body and structural members at the inside and the outside of the vacuum vessel main body are constituted by structural materials activated by irradiation of neutrons from plasmas such as stainless steels. Shielding members comprising tungsten or molybdenum are disposed on the surface of the vacuum vessel main body and the structural members of the inside and the outside of the main body. The shielding members have a function also as first walls or a seat member for the first walls. Armor tiles may be disposed to the shielding members. The shielding members and the armor tiles are secured to a securing seat member disposed, for example, to an inner plate of the vacuum vessel main body by bolts. Since the shielding members are disposed, it is not necessary to constitute the vacuum vessel main body and the structural members at the inside and the outside thereof by using a low activation material which is less activated, such as a titanium alloy. (I.N.)

  19. Vacuum vessel for thermonuclear device

    Energy Technology Data Exchange (ETDEWEB)

    Kikuchi, Mitsuru; Nagashima, Keisuke [Japan Atomic Energy Research Inst., Tokyo (Japan); Suzuki, Masaru; Onozuka, Masaki

    1997-07-11

    A vacuum vessel main body and structural members at the inside and the outside of the vacuum vessel main body are constituted by structural materials activated by irradiation of neutrons from plasmas such as stainless steels. Shielding members comprising tungsten or molybdenum are disposed on the surface of the vacuum vessel main body and the structural members of the inside and the outside of the main body. The shielding members have a function also as first walls or a seat member for the first walls. Armor tiles may be disposed to the shielding members. The shielding members and the armor tiles are secured to a securing seat member disposed, for example, to an inner plate of the vacuum vessel main body by bolts. Since the shielding members are disposed, it is not necessary to constitute the vacuum vessel main body and the structural members at the inside and the outside thereof by using a low activation material which is less activated, such as a titanium alloy. (I.N.)

  20. Molten material-containing vessel

    International Nuclear Information System (INIS)

    Akagawa, Katsuhiko

    1998-01-01

    The molten material-containing vessel of the present invention comprises a vessel main body having an entrance opened at the upper end, a lid for closing the entrance, an outer tube having an upper end disposed at the lower surface of the lid, extended downwardly and having an closed lower end and an inner tube disposed coaxially with the outer tube. When a molten material is charged from the entrance to the inside of the vessel main body of the molten material-containing vessel and the entrance is closed by the lid, the outer tube and the inner tube are buried in the molten material in the vessel main body, accordingly, a fluid having its temperature elevated by absorption of the heat of the molten material rises along the inner circumferential surface of the outer tube, abuts against the lower surface of the lid and cooled by exchanging heat with the lid and forms a circulating flow. Since the heat in the molten material is continuously absorbed by the fluid, transferred to the lid and released from the lid to the atmospheric air, heat releasing efficiency can be improved compared with conventional cases. (N.H.)

  1. Parental divorce and parental death

    DEFF Research Database (Denmark)

    Marcussen, Jette; Thuen, Frode; Poul, Bruun

    2015-01-01

    The aim of this review was to identify research on children and adolescents who experience double bereavement, i.e. the experience of loss through parental divorce followed by either parental death or critical illness with imminent death. This knowledge may identify evidence to underpin knowledge......; challenges in both custodial and non-custodial parental death; risk of mental health problems, and the need of support and interventions....

  2. Food preservation by irradiation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1978-02-15

    As shortages of food and energy still continue to constitute the major threats to the well-being of the human race, all actions aiming at overcoming these problems must be assigned vital importance. Of the two complementary ways of solving the food problem (i.e., increasing the production of food and decreasing the spoilage of food) a novel method designed to contribute to the latter purpose has been discussed at this symposium hosted by The Netherlands and held under the aegis of the Food and Agriculture Organization of the United Nations, the International Atomic Energy Agency and the World Health Organization. Progress made since the last symposium of this kind (Bombay, India, 1972) was reviewed from the technological, economic and wholesomeness points of view by participants from 39 countries (60% of the latter were of the developing world). From the reports presented on the use of radiations to control physiological changes in plants, feasibility of radiation preservation of potatoes, onions, garlic, as well as of some tropical and subtropical fruits (mangoes, papayas, litchis and avocado) was confirmed. For potatoes, onions and mangoes, optimal conditions of treatment and storage were established on a larger scale, combined with sizeable consumer trials. Combinations of ionizing radiation with chemicals (salycilic acid, for potatoes), and physical agents (ultraviolet rays, for papayas) have been reported to be successful against the incidence of rot. A considerable number of papers dealt with the control of microbiological spoilage of foods. Work since 1972 has shown that radurization of fruits and vegetables (bananas, mangoes, dried dates, endive, chickory, onions, soup-greens), meat, poultry, marine products (mackerel, cod and plaice fillets, shrimps), decontamination of food ingredients and food technology aids (enzyme preparations, proteins, starch, spices), radappertization of meat and animal feedstuffs as well as combination treatments with salt, heat

  3. Food preservation by irradiation

    International Nuclear Information System (INIS)

    1978-01-01

    As shortages of food and energy still continue to constitute the major threats to the well-being of the human race, all actions aiming at overcoming these problems must be assigned vital importance. Of the two complementary ways of solving the food problem (i.e., increasing the production of food and decreasing the spoilage of food) a novel method designed to contribute to the latter purpose has been discussed at this symposium hosted by The Netherlands and held under the aegis of the Food and Agriculture Organization of the United Nations, the International Atomic Energy Agency and the World Health Organization. Progress made since the last symposium of this kind (Bombay, India, 1972) was reviewed from the technological, economic and wholesomeness points of view by participants from 39 countries (60% of the latter were of the developing world). From the reports presented on the use of radiations to control physiological changes in plants, feasibility of radiation preservation of potatoes, onions, garlic, as well as of some tropical and subtropical fruits (mangoes, papayas, litchis and avocado) was confirmed. For potatoes, onions and mangoes, optimal conditions of treatment and storage were established on a larger scale, combined with sizeable consumer trials. Combinations of ionizing radiation with chemicals (salycilic acid, for potatoes), and physical agents (ultraviolet rays, for papayas) have been reported to be successful against the incidence of rot. A considerable number of papers dealt with the control of microbiological spoilage of foods. Work since 1972 has shown that radurization of fruits and vegetables (bananas, mangoes, dried dates, endive, chickory, onions, soup-greens), meat, poultry, marine products (mackerel, cod and plaice fillets, shrimps), decontamination of food ingredients and food technology aids (enzyme preparations, proteins, starch, spices), radappertization of meat and animal feedstuffs as well as combination treatments with salt, heat

  4. Emergency venting of pressure vessels

    International Nuclear Information System (INIS)

    Steinkamp, H.

    1995-01-01

    With the numerical codes developed for safety analysis the venting of steam vessel can be simulated. ATHLET especially is able to predict the void fraction depending on the vessel height. Although these codes contain a one-dimensional model they allow the description of complex geometries due to the detailed nodalization of the considered apparatus. In chemical reactors, however, the venting process is not only influenced by the flashing behaviour but additionally by the running chemical reaction in the vessel. Therefore the codes used for modelling have to consider the kinetics of the chemical reaction. Further multi-component systems and dissolving processes have to be regarded. In order to preduct the fluid- and thermodynamic process it could be helpful to use 3-dimensional codes in combination with the one-dimensional codes as used in nuclear industry to get a more detailed describtion of the running processes. (orig./HP)

  5. Development of Catamaran Fishing Vessel

    Directory of Open Access Journals (Sweden)

    A. Jamaluddin

    2010-11-01

    Full Text Available Multihull due to a couple of advantages has been the topic of extensive research work in naval architecture. In this study, a series of investigation of fishing vessel to save fuel energy was carried out at ITS. Two types of ship models, monohull (round bilge and hard chine and catamaran, a boat with two hulls (symmetrical and asymmetrical were developed. Four models were produced physically and numerically, tested (towing tank and simulated numerically (CFD code. The results of the two approaches indicated that the catamaran mode might have drag (resistance smaller than those of monohull at the same displacement. A layout of catamaran fishing vessel, proposed here, indicates the freedom of setting the deck equipments for fishing vessel.

  6. Parent Management

    DEFF Research Database (Denmark)

    Knudsen, Hanne

    2007-01-01

    and parents say given these assumptions? Which management responsibility is addressed through such training of the difficult conversation?  My conclusions are, briefly, that the difficult conversation is more correctly to be called an impossible conversation. It is an asking for the parent's consent...

  7. Contamination versus preservation of cosmetics

    DEFF Research Database (Denmark)

    Lundov, Michael Dyrgaard; Moesby, Lise; Zachariae, Claus

    2009-01-01

    Cosmetics with high water content are at a risk of being contaminated by micro-organisms that can alter the composition of the product or pose a health risk to the consumer. Pathogenic micro-organisms such as Staphylococcus aureus and Pseudomonas aeruginosa are frequently found in contaminated...... cosmetics. In order to avoid contamination of cosmetics, the manufacturers add preservatives to their products. In the EU and the USA, cosmetics are under legislation and all preservatives must be safety evaluated by committees. There are several different preservatives available but the cosmetic market...

  8. 33 CFR 90.3 - Pushing vessel and vessel being pushed: Composite unit.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Pushing vessel and vessel being... HOMELAND SECURITY INLAND NAVIGATION RULES INLAND RULES: INTERPRETATIVE RULES § 90.3 Pushing vessel and vessel being pushed: Composite unit. Rule 24(b) of the Inland Rules states that when a pushing vessel and...

  9. 33 CFR 82.3 - Pushing vessel and vessel being pushed: Composite unit.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 1 2010-07-01 2010-07-01 false Pushing vessel and vessel being... HOMELAND SECURITY INTERNATIONAL NAVIGATION RULES 72 COLREGS: INTERPRETATIVE RULES § 82.3 Pushing vessel and vessel being pushed: Composite unit. Rule 24(b) of the 72 COLREGS states that when a pushing vessel and a...

  10. Containment vessel design and practice

    International Nuclear Information System (INIS)

    Bangash, Y.

    1983-01-01

    The state of the art of analysis and design of the concrete containment vessels required for BWR and PWR is reviewed. A step-by-step critical appraisal of the existing work is given. Elastic, inelastic and cracking conditions under extreme loads are fully discussed. Problems associated with these structures are highlighted. A three-dimensional finite element analysis is included to cater for service, overload and dynamic cracking of such structures. Missile impact and seismic effects are included in this work. The second analysis is known as the limit state analysis, which is given to design such vessels for any kind of load. (U.K.)

  11. Stress analysis of pressure vessels

    International Nuclear Information System (INIS)

    Kim, B.K.; Song, D.H.; Son, K.H.; Kim, K.S.; Park, K.B.; Song, H.K.; So, J.Y.

    1979-01-01

    This interim report contains the results of the effort to establish the stress report preparation capability under the research project ''Stress analysis of pressure vessels.'' 1978 was the first year in this effort to lay the foundation through the acquisition of SAP V structural analysis code and a graphic terminal system for improved efficiency of using such code. Software programming work was developed in pre- and post processing, such as graphic presentation of input FEM mesh geometry and output deformation or mode shope patterns, which was proven to be useful when using the FEM computer code. Also, a scheme to apply fracture mechanics concept was developed in fatigue analysis of pressure vessels. (author)

  12. Vessel dilatation in coronary angiograms

    International Nuclear Information System (INIS)

    Hinterauer, L.; Goebel, N.

    1983-01-01

    Amongst 166 patients with aneurysms, ectasia or megaloarteries shown on coronary angiograms, 86.1% had dilated vessels as part of generalised coronary sclerosis (usually in patients with three-vessel disease). In 9%, dilatation was of iatrogenic origin and in 4.8% it was idiopathic. One patient had Marfan's syndrome. Amongst 9 000 patients, there were eight with megalo-arteries without stenosis; six of these had atypical angina and three suffered an infarct. Patients with definite dilatation of the coronary artery and stagnation of contrast flow required treatment. (orig.) [de

  13. Vessel dilatation in coronary angiograms

    Energy Technology Data Exchange (ETDEWEB)

    Hinterauer, L.; Goebel, N.

    1983-11-01

    Amongst 166 patients with aneurysms, ectasia or megaloarteries shown on coronary angiograms, 86.1% had dilated vessels as part of generalised coronary sclerosis (usually in patients with three-vessel disease). In 9%, dilatation was of iatrogenic origin and in 4.8% it was idiopathic. One patient had Marfan's syndrome. Amongst 9 000 patients, there were eight with megalo-arteries without stenosis; six of these had atypical angina and three suffered an infarct. Patients with definite dilatation of the coronary artery and stagnation of contrast flow required treatment.

  14. Federal Support for Preserve America

    Science.gov (United States)

    Mississippi's Heritage Tourism Industry Post Hurricane Katrina also received a $150,000 Preserve America Grant Arkansas Delta, one for music, one for African-American history, and one for agriculture. The project will

  15. Cultural Preservation Program for Alaska

    Science.gov (United States)

    Barbaran, Francisco Ramon

    2011-01-01

    In this technical report, an innovative cultural preservation program for implementation in Athabascan villages is presented. The parameters for success in implementing such a project is discussed based on a workshop with Athabascan elders.

  16. Diagnostics carried by a light multipurpose deployer for vacuum vessel interventions

    Energy Technology Data Exchange (ETDEWEB)

    Houry, M., E-mail: Michael.houry@cea.fr [CEA-IRFM, F-13108 Saint-Paul-Lez-Durance (France); Gargiulo, L.; Balorin, C.; Bruno, V.; Keller, D.; Roche, H. [CEA-IRFM, F-13108 Saint-Paul-Lez-Durance (France); Kammerer, N.; Measson, Y. [CEA, LIST, F-92265 Fontenay-aux-Roses (France); Carrel, F.; Schoepff, V. [CEA, LIST, F-91191 Gif-sur-Yvette (France)

    2011-10-15

    ITER will greatly rely on remote-handling operations to accomplish its scientific missions. Robotic systems will also be required to operate inside vacuum vessels in order to limit or replace human access, to intervene quickly between experimental sessions for in-vessel inspections and measurements, and to preserve the machine conditioning and thus improve machine availability. In this prospect, a multipurpose carrier prototype called Articulated Inspection Arm (AIA) was developed by CEA laboratories within the European work program. With an embedded camera, it successfully demonstrated close inspection feasibility inside Tore Supra tokamak. The AIA robot was designed for mini-invasive operations with interchangeable diagnostics to be plugged at its head. This covers various applications for the safety, the operation and the scientific mission (in-vessel inspection, plasma diagnostics calibrations or inner components analysis and treatments). This paper presents recent analysis and results obtain with diagnostics developed by CEA for in-vessel remote-handling intervention.

  17. Diagnostics carried by a light multipurpose deployer for vacuum vessel interventions

    International Nuclear Information System (INIS)

    Houry, M.; Gargiulo, L.; Balorin, C.; Bruno, V.; Keller, D.; Roche, H.; Kammerer, N.; Measson, Y.; Carrel, F.; Schoepff, V.

    2011-01-01

    ITER will greatly rely on remote-handling operations to accomplish its scientific missions. Robotic systems will also be required to operate inside vacuum vessels in order to limit or replace human access, to intervene quickly between experimental sessions for in-vessel inspections and measurements, and to preserve the machine conditioning and thus improve machine availability. In this prospect, a multipurpose carrier prototype called Articulated Inspection Arm (AIA) was developed by CEA laboratories within the European work program. With an embedded camera, it successfully demonstrated close inspection feasibility inside Tore Supra tokamak. The AIA robot was designed for mini-invasive operations with interchangeable diagnostics to be plugged at its head. This covers various applications for the safety, the operation and the scientific mission (in-vessel inspection, plasma diagnostics calibrations or inner components analysis and treatments). This paper presents recent analysis and results obtain with diagnostics developed by CEA for in-vessel remote-handling intervention.

  18. Fertility Preservation for Children Diagnosed with Cancer

    Medline Plus

    Full Text Available ... options further? Fertility Preservation - Where Does It Fit? Options for Fertility Preservation The following diagram gives a brief description of fertility preservation options available to children diagnosed with cancer before and ...

  19. Hereditary History Preserving Bisimilarity Is Undecidable

    DEFF Research Database (Denmark)

    Jurdzinski, Marcin; Nielsen, Mogens

    2000-01-01

    History preserving bisimilarity (hp-bisimilarity) and hereditary history preserving bisimilarity (hhp-bisimilarity) are behavioural equivalences taking into account causal relationships between events of concurrent systems. Their prominent feature is being preserved under action refinement...

  20. Fertility Preservation for Children Diagnosed with Cancer

    Science.gov (United States)

    ... Skip to main content SaveMyFertility An Online Fertility Preservation Toolkit for Patients and Their Providers Open menu ... with Cancer You are here Home » Patients Fertility Preservation for Children Diagnosed with Cancer Fertility Preservation for ...

  1. Grounding Damage to Conventional Vessels

    DEFF Research Database (Denmark)

    Lützen, Marie; Simonsen, Bo Cerup

    2003-01-01

    The present paper is concerned with rational design of conventional vessels with regard to bottom damage generated in grounding accidents. The aim of the work described here is to improve the design basis, primarily through analysis of new statistical data for grounding damage. The current regula...

  2. PLANNING VESSEL BODY SECTION PRODUCTION

    Directory of Open Access Journals (Sweden)

    A. G. Grivachevsky

    2015-01-01

    Full Text Available A problem of planning production of a vessel body section is considered. The problem is reduced to the classic Johnson’s tree-machine flow-shop scheduling problem. A genetic algorithm and computer experiment to compare efficiency of this algorithm and the algorithm of full enumeration are described.

  3. Pressure vessel and method therefor

    Science.gov (United States)

    Saunders, Timothy

    2017-09-05

    A pressure vessel includes a pump having a passage that extends between an inlet and an outlet. A duct at the pump outlet includes at least one dimension that is adjustable to facilitate forming a dynamic seal that limits backflow of gas through the passage.

  4. Commercial Passenger Fishing Vessel Fishery

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains the logbook data from U.S.A. Commercial Passenger Fishing Vessels (CPFV) fishing in the U.S.A. EEZ and in waters off of Baja California, from...

  5. Development of PWR pressure vessel steels

    International Nuclear Information System (INIS)

    Druce, S.; Edwards, B.

    1982-01-01

    Requirements to be met by vessel steels for pressurized water reactors are analyzed. Chemicat composition of low-alloyed steels, mechanical properties of sheets and forgings made of these steels and changes in the composition and properties over the wall thickness of the reactor vessel are presented. Problems of the vessel manufacturing including welding and heat treatment processes of sheets and forgings are considered. Special attention is paid to steel embrittlement during vessel fabrication and operation (radiation embrittlement, thermal embrittlement). The role of non-metal inclusions and their effect on anisotropy of fracture toughness is discussed. Possible developments of vessel steels and procedures for producing reactor vessels are reviewed

  6. Development of PWR pressure vessel steels

    Energy Technology Data Exchange (ETDEWEB)

    Druce, S.; Edwards, B.

    1982-01-01

    Requirements to be met by vessel steels for pressurized water reactors are analyzed. Chemicat composition of low-alloyed steels, mechanical properties of sheets and forgings made of these steels and changes in the composition and properties over the wall thickness of the reactor vessel are presented. Problems of the vessel manufacturing including welding and heat treatment processes of sheets and forgings are considered. Special attention is paid to steel embrittlement during vessel fabrication and operation (radiation embrittlement, thermal embrittlement). The role of non-metal inclusions and their effect on anisotropy of fracture toughness is discussed. Possible developments of vessel steels and procedures for producing reactor vessels are reviewed.

  7. [Duodenum-preserving total pancreatic head resection and pancreatic head resection with segmental duodenostomy].

    Science.gov (United States)

    Takada, Tadahiro; Yasuda, Hideki; Nagashima, Ikuo; Amano, Hodaka; Yoshiada, Masahiro; Toyota, Naoyuki

    2003-06-01

    A duodenum-preserving pancreatic head resection (DPPHR) was first reported by Beger et al. in 1980. However, its application has been limited to chronic pancreatitis because of it is a subtotal pancreatic head resection. In 1990, we reported duodenum-preserving total pancreatic head resection (DPTPHR) in 26 cases. This opened the way for total pancreatic head resection, expanding the application of this approach to tumorigenic morbidities such as intraductal papillary mucinous tumor (IMPT), other benign tumors, and small pancreatic cancers. On the other hand, Nakao et al. reported pancreatic head resection with segmental duodenectomy (PHRSD) as an alternative pylorus-preserving pancreatoduodenectomy technique in 24 cases. Hirata et al. also reported this technique as a new pylorus-preserving pancreatoduodenostomy with increased vessel preservation. When performing DPTPHR, the surgeon should ensure adequate duodenal blood supply. Avoidance of duodenal ischemia is very important in this operation, and thus it is necessary to maintain blood flow in the posterior pancreatoduodenal artery and to preserve the mesoduodenal vessels. Postoperative pancreatic functional tests reveal that DPTPHR is superior to PPPD, including PHSRD, because the entire duodenum and duodenal integrity is very important for postoperative pancreatic function.

  8. Fertility Preservation for Children Diagnosed with Cancer

    Medline Plus

    Full Text Available ... You are here Home » Patients Fertility Preservation for Children Diagnosed with Cancer Fertility Preservation for Children Diagnosed with Cancer Ask Your Doctor Information for ...

  9. Fertility Preservation for Children Diagnosed with Cancer

    Medline Plus

    Full Text Available ... Home » Patients Fertility Preservation for Children Diagnosed with Cancer Fertility Preservation for Children Diagnosed with Cancer Ask Your Doctor Information for Patients Many adult ...

  10. Pressure vessel for nuclear reactor plant consisting of several pre-stressed cast pressure vessels

    International Nuclear Information System (INIS)

    Bodmann, E.

    1984-01-01

    Several cylindrical pressure vessel components made of pressure castings are arranged on a sector of a circle around the cylindrical cast pressure vessel for accommodating the helium cooled HTR. Each component pressure vessel is connected to the reactor vessel by a horizontal gas duct. The contact surfaces between reactor and component pressure vessel are in one plane. In the spaces between the individual component pressure vessels, there are supporting blocks made of cast iron, which are hollow and also have flat surfaces. With the reactor vessel and the component pressure vessels they form a disc-shaped connecting part below and above the gas ducts. (orig./PW)

  11. Reducing catheter-related thrombosis using a risk reduction tool centered on catheter to vessel ratio.

    Science.gov (United States)

    Spencer, Timothy R; Mahoney, Keegan J

    2017-11-01

    In vascular access practices, the internal vessel size is considered important, and a catheter to vessel ratio (CVR) is recommended to assist clinicians in selecting the most appropriate-sized device for the vessel. In 2016, new practice recommendations stated that the CVR can increase from 33 to 45% of the vessels diameter. There has been evidence on larger diameter catheters and increased thrombosis risk in recent literature, while insufficient information established on what relationship to vessel size is appropriate for any intra-vascular device. Earlier references to clinical standards and guidelines did not clearly address vessel size in relation to the area consumed or external catheter diameter. The aim of this manuscript is to present catheter-related thrombosis evidence and develop a standardized process of ultrasound-guided vessel assessment, integrating CVR, Virchow's triad phenomenon and vessel health and preservation strategies, empowering an evidence-based approach to device placement. Through review, calculation and assessment on the areas of the 33 and 45% rule, a preliminary clinical tool was developed to assist clinicians make cognizant decisions when placing intravascular devices relating to target vessel size, focusing on potential reduction in catheter-related thrombosis. Increasing the understanding and utilization of CVRs will lead to a safer, more consistent approach to device placement, with potential thrombosis reduction strategies. The future of evidence-based data relies on the clinician to capture accurate vessel measurements and device-related outcomes. This will lead to a more dependable data pool, driving the relationship of catheter-related thrombosis and vascular assessment.

  12. Parental involvement

    Directory of Open Access Journals (Sweden)

    Ezra S Simon

    2005-01-01

    Full Text Available Parent-Teacher Associations and other community groups can play a significant role in helping to establish and run refugee schools; their involvement can also help refugee adults adjust to their changed circumstances.

  13. Parenting Conflicts

    Science.gov (United States)

    ... Home Family Dynamics Adoption & Foster Care Communication & Discipline Types of Families Media Work & Play Getting Involved in Your Community Healthy Children > Family Life > Family Dynamics > Parenting Conflicts Family Life Listen Español Text Size Email Print ...

  14. AFSC/FMA/Vessel Assessment Logging

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Vessels fishing trawl gear, vessels fishing hook-and-line and pot gear that are also greater than 57.5 feet overall, and shoreside and floating processing facilities...

  15. 2013 EPA Vessels General Permit (VGP)

    Data.gov (United States)

    U.S. Environmental Protection Agency — Information for any vessel that submitted a Notice of Intent (NOI), Notice of Termination (NOT), or annual report under EPA's 2013 Vessel General Permit (VGP)....

  16. Interstitial Cells of Blood Vessels

    Directory of Open Access Journals (Sweden)

    Vladimír Pucovský

    2010-01-01

    Full Text Available Blood vessels are made up of several distinct cell types. Although it was originally thought that the tunica media of blood vessels was composed of a homogeneous population of fully differentiated smooth muscle cells, more recent data suggest the existence of multiple smooth muscle cell subpopulations in the vascular wall. One of the cell types contributing to this heterogeneity is the novel, irregularly shaped, noncontractile cell with thin processes, termed interstitial cell, found in the tunica media of both veins and arteries. While the principal role of interstitial cells in veins seems to be pacemaking, the role of arterial interstitial cells is less clear. This review summarises the knowledge of the functional and structural properties of vascular interstitial cells accumulated so far, offers hypotheses on their physiological role, and proposes directions for future research.

  17. The Vessel Schedule Recovery Problem

    DEFF Research Database (Denmark)

    Brouer, Berit Dangaard; Plum, Christian Edinger Munk; Vaaben, Bo

    Maritime transportation is the backbone of world trade and is accountable for around 3% of the worlds CO2 emissions. We present the Vessel Schedule Recovery Problem (VSRP) to evaluate a given disruption scenario and to select a recovery action balancing the trade off between increased bunker cons...... consumption and the impact on the remaining network and the customer service level. The model is applied to 4 real cases from Maersk Line. Solutions are comparable or superior to those chosen by operations managers. Cost savings of up to 58% may be achieved.......Maritime transportation is the backbone of world trade and is accountable for around 3% of the worlds CO2 emissions. We present the Vessel Schedule Recovery Problem (VSRP) to evaluate a given disruption scenario and to select a recovery action balancing the trade off between increased bunker...

  18. Nuclear power plant pressure vessels. Inservice inspections

    International Nuclear Information System (INIS)

    1995-01-01

    The requirements for the planning and reporting of inservice inspections of nuclear power plant pressure vessels are presented. The guide specifically applies to inservice inspections of Safety class 1 and 2 nuclear power plant pressure vessels, piping, pumps and valves plus their supports and reactor pressure vessel internals by non- destructive examination methods (NDE). Inservice inspections according to the Pressure Vessel Degree (549/73) are discussed separately in the guide YVL 3.0. (4 refs.)

  19. Expanded Fermilab pressure vessel directory program

    Energy Technology Data Exchange (ETDEWEB)

    Tanner, A.

    1983-01-01

    Several procedures have been written to manage the information pertaining to the vacuum tanks and pressure vessels for which the laboratory is responsible. These procedures have been named TANK1 for the vessels belonging to the Accelerator Division, TANK2 and TANK3 for the vessels belonging to the Research Division and to Technical Support respectively, and TANK4 for the vessels belonging to the Business Division. The operating procedures are otherwise identical in every respect.

  20. Expanded Fermilab pressure vessel directory program

    International Nuclear Information System (INIS)

    Tanner, A.

    1983-01-01

    Several procedures have been written to manage the information pertaining to the vacuum tanks and pressure vessels for which the laboratory is responsible. These procedures have been named TANK1 for the vessels belonging to the Accelerator Division, TANK2 and TANK3 for the vessels belonging to the Research Division and to Technical Support respectively, and TANK4 for the vessels belonging to the Business Division. The operating procedures are otherwise identical in every respect

  1. Preservation theorems on finite structures

    International Nuclear Information System (INIS)

    Hebert, M.

    1994-09-01

    This paper concerns classical Preservation results applied to finite structures. We consider binary relations for which a strong form of preservation theorem (called strong interpolation) exists in the usual case. This includes most classical cases: embeddings, extensions, homomorphisms into and onto, sandwiches, etc. We establish necessary and sufficient syntactic conditions for the preservation theorems for sentences and for theories to hold in the restricted context of finite structures. We deduce that for all relations above, the restricted theorem for theories hold provided the language is finite. For the sentences the restricted version fails in most cases; in fact the ''homomorphism into'' case seems to be the only possible one, but the efforts to show that have failed. We hope our results may help to solve this frustrating problem; in the meantime, they are used to put a lower bound on the level of complexity of potential counterexamples. (author). 8 refs

  2. Blogs as Objects of Preservation

    DEFF Research Database (Denmark)

    Stepanyan, Karen; Gkotsis, George; Kalb, Hendrik

    2012-01-01

    challenge for the digital preservation community. While the methodological frameworks for selecting these properties provide a good foundation, a continued discussion is necessary for further clarifying and improving the available methods. This paper advances earlier work by building on the exist......challenge for the digital preservation community. While the methodological frameworks for selecting these properties provide a good foundation, a continued discussion is necessary for further clarifying and improving the available methods. This paper advances earlier work by building...... analysis) and, subsequently, improve the final reformulation of the properties. To demonstrate the applicability of the modified framework, the paper presents a use case of a blog preservation initiative that is informed by stakeholder interviews and evaluation of structural and technological foundations...

  3. Vacuum vessel for plasma devices

    International Nuclear Information System (INIS)

    Yamada, Masao; Taguchi, Masami.

    1975-01-01

    Object: To permit effective utility of the space in the inner and outer sides of the container wall and also permit repeated assembly for use. Structure: Vacuum vessel wall sections are sealed together by means of welding bellows, and also flange portions formed at the end of the wall sections are coupled together by bolts and are sealed together with a seal ring and a seal cap secured by welding. (Nakamura, S.)

  4. Reactor vessel head permanent shield

    International Nuclear Information System (INIS)

    Hankinson, M.F.; Leduc, R.J.; Richard, J.W.; Malandra, L.J.

    1989-01-01

    A nuclear reactor is described comprising: a nuclear reactor pressure vessel closure head; control rod drive mechanisms (CRDMs) disposed within the closure head so as to project vertically above the closure head; cooling air baffle means surrounding the control rod drive mechanisms for defining cooling air paths relative to the control rod drive mechanisms; means defined within the periphery of the closure head for accommodating fastening means for securing the closure head to its associated pressure vessel; lifting lugs fixedly secured to the closure head for facilitating lifting and lowering movements of the closure head relative to the pressure vessel; lift rods respectively operatively associated with the plurality of lifting lugs for transmitting load forces, developed during the lifting and lowering movements of the closure head, to the lifting lugs; upstanding radiation shield means interposed between the cooling air baffle means and the periphery of the enclosure head of shielding maintenance personnel operatively working upon the closure head fastening means from the effects of radiation which may emanate from the control rod drive mechanisms and the cooling air baffle means; and connecting systems respectively associated with each one of the lifting lugs and each one of the lifting rods for connecting each one of the lifting rods to a respective one of each one of the lifting lugs, and for simultaneously connecting a lower end portion of the upstanding radiation shield means to each one of the respective lifting lugs

  5. Reactor-vessel-sectioning demonstration

    International Nuclear Information System (INIS)

    Lundgren, R.A.

    1981-09-01

    A technical demonstration was successfully completed of simulated reactor vessel sectioning using the combined techniques of air arc gouging and flame cutting. A 4-ft x 3-ft x 9-in. thick sample was fabricated of A36 carbon steel to simulate a reactor vessel wall. A 1/4-in. layer of stainless steel (SS) was tungsten inert gas (TIG)-welded to the carbon steel. Several techniques were considered to section the simulated reactor vessel; air arc gouging was selected to penetrate the stainless steel, and flame cutting was selected to sever the carbon steel. Three sectioning operations were demonstrated. For all three, the operating parameters were the same; but the position of the sample was varied. For the first cut, the sample was placed in a horizontal position, and it was successfully severed from the SS side. For the second cut, the sample was turned over and cut from the carbon steel side. Cutting from the carbon steel side has the advantages of cost reduction

  6. 33 CFR 151.1512 - Vessel safety.

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false Vessel safety. 151.1512 Section... River § 151.1512 Vessel safety. Nothing in this subpart relieves the master of the responsibility for ensuring the safety and stability of the vessel or the safety of the crew and passengers, or any other...

  7. Reactor vessel supported by flexure member

    International Nuclear Information System (INIS)

    Crawford, J.D.; Pankow, B.

    1975-01-01

    A description is given of a reactor pressure vessel which is provided with vertical support means in the form of circumferentially spaced columns upon which the vessel is mounted. The columns are adapted to undergo flexure in order to accommodate the thermally induced displacements experienced by the vessel during operational transients

  8. 19 CFR 4.97 - Salvage vessels.

    Science.gov (United States)

    2010-04-01

    ... United States and Great Britain ‘concerning reciprocal rights for United States and Canada in the... meaning of this statute. (e) A Mexican vessel may engage in a salvage operation on a Mexican vessel in any territorial waters of the United States in which Mexican vessels are permitted to conduct such operations by...

  9. Model tests for prestressed concrete pressure vessels

    International Nuclear Information System (INIS)

    Stoever, R.

    1975-01-01

    Investigations with models of reactor pressure vessels are used to check results of three dimensional calculation methods and to predict the behaviour of the prototype. Model tests with 1:50 elastic pressure vessel models and with a 1:5 prestressed concrete pressure vessel are described and experimental results are presented. (orig.) [de

  10. 50 CFR 648.4 - Vessel permits.

    Science.gov (United States)

    2010-10-01

    ... carrying passengers for hire. (8) Atlantic bluefish vessels. (i) Commercial. Any vessel of the United... lands Atlantic bluefish in or from the EEZ in excess of the recreational possession limit specified at § 648.164 must have been issued and carry on board a valid commercial bluefish vessel permit. (ii) Party...

  11. Laparoscopic spleen-preserving distal pancreatectomy for pancreatic neoplasms: A retrospective study

    Science.gov (United States)

    Yan, Jia-Fei; Xu, Xiao-Wu; Jin, Wei-Wei; Huang, Chao-Jie; Chen, Ke; Zhang, Ren-Chao; Harsha, Ajoodhea; Mou, Yi-Ping

    2014-01-01

    AIM: To describe the clinical characteristics, technical procedures, and outcomes of patients undergoing laparoscopic spleen-preserving distal pancreatectomy (LSPDP) for benign and malignant pancreatic neoplasms. METHODS: The clinical data of 38 patients who underwent LSPDP in the Sir Run Run Shaw Hospital between January 2003 and August 2013 were analyzed retrospectively. Surgical techniques for LSPDP included preservation of the splenic artery and vein (Kimura’s technique) and ligation of the splenic pedicle with preservation of the short gastric vessels (Warshaw’s technique). RESULTS: There were no conversions to open surgery in the 38 patients. Splenic vessels were conserved during spleen-preserving pancreatectomy, except in two patients who underwent resection of the splenic vessels and preservation only of the short gastric vessels. The mean operation time was 123.2 ± 52.4 min, the mean intraoperative blood loss was 78.2 ± 39.5 mL, and the mean postoperative hospital stay was 7.6 ± 2.9 d. The overall rate of postoperative complications was 18.4% (7/38), and the rate of clinical pancreatic fistula was 13.2% (5/38). All postoperative complications were treated conservatively. The postoperative pathological diagnoses were 22 cases of benign pancreatic disease and 16 cases of borderline or low-grade malignant lesions. During a median follow-up of 38 mo (range: 5-133 mo), no recurrence was observed. CONCLUSION: LSPDP is a safe, feasible and effective procedure for the treatment of benign and low-grade malignant tumors of the distal pancreas. PMID:25320534

  12. Active preservation - otherwise no archives

    International Nuclear Information System (INIS)

    Norberg, E.

    1996-01-01

    The role and history of national and regional archives in Sweden is discussed. It is noted that large portions of our cultural heritage can not be set aside for long-term preservation due to several facts: Some events are never documented, Important records are never set aside, Important information is stored on media that are not suitable for long-term preservation, Information can not be accessed due to inadequate search aids, Eliminations are made due to lack of space. Strategies for an action plan to save valuable material are briefly outlined, and the importance of international cooperation is stressed

  13. Yeasts preservation: alternatives for lyophilisation

    OpenAIRE

    Nyanga, Loveness K.; Nout, Martinus J. R.; Smid, Eddy J.; Boekhout, Teun; Zwietering, Marcel H.

    2012-01-01

    The aim of the study was to compare the effect of two low-cost, low technology traditional methods for drying starter cultures with standard lyophilisation. Lyophilised yeast cultures and yeast cultures preserved in dry rice cakes and dry plant fibre strands were examined for viable cell counts during 6 months storage at 4 and 25 °C. None of the yeast cultures showed a significant loss in viable cell count during 6 months of storage at 4 °C upon lyophilisation and preservation in dry rice cak...

  14. Polarization-preserving holey fibers

    DEFF Research Database (Denmark)

    Broeng, Jes; Mogilevtsev, Dmitri; Libori, Stig E. Barkou

    2001-01-01

    In this work we suggest and discuss a microstructure of air capillaries with elliptical cross-section in a tread of glass that gives opportunity for Creation of polarization-preserving fiber with very small beat length between the fundamental modes of different polarization......In this work we suggest and discuss a microstructure of air capillaries with elliptical cross-section in a tread of glass that gives opportunity for Creation of polarization-preserving fiber with very small beat length between the fundamental modes of different polarization...

  15. Active preservation - otherwise no archives

    Energy Technology Data Exchange (ETDEWEB)

    Norberg, E [National Swedish Archives, Stockholm (Sweden)

    1996-12-01

    The role and history of national and regional archives in Sweden is discussed. It is noted that large portions of our cultural heritage can not be set aside for long-term preservation due to several facts: Some events are never documented, Important records are never set aside, Important information is stored on media that are not suitable for long-term preservation, Information can not be accessed due to inadequate search aids, Eliminations are made due to lack of space. Strategies for an action plan to save valuable material are briefly outlined, and the importance of international cooperation is stressed.

  16. 36 CFR 910.32 - Historic preservation.

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Historic preservation. 910.32... DEVELOPMENT AREA Standards Uniformly Applicable to the Development Area § 910.32 Historic preservation... Preservation Plan of the Corporation, are specified for preservation, shall be acomplished (a) in accordance...

  17. ACHP | Summary of the Preserve America Initiative

    Science.gov (United States)

    Initiative Preserve America: Explore and Enjoy Our Heritage (logo) Summary of the Preserve America Initiative Preserve America is a White House initiative that encourages and supports community efforts to preserve and enjoy our priceless cultural and natural heritage. The goals of the initiative include a greater shared

  18. Comparison of Tissue Preservation using Formalin and Ethanol as Preservative Formula

    OpenAIRE

    See Woan Shian; Arifin Soenggono; Sawkar Vijay Pramod

    2016-01-01

    Background: Tissue preservation can be performed through embalming, by providing the chemical embalming fluid to the human remains. Formalin’s preservative formula is the foundation for modern methods of embalming. Unfortunately, this preservative formula has several disadvantages. While Ethanol’s preservative formula is a considerable agent to replace formalin’s preservative formula. The aim of this study was to compare the tissue preservation using formalin and ethanol as preservative formu...

  19. Integrating Multiple Autonomous Underwater Vessels, Surface Vessels and Aircraft into Oceanographic Research Vessel Operations

    Science.gov (United States)

    McGillivary, P. A.; Borges de Sousa, J.; Martins, R.; Rajan, K.

    2012-12-01

    Autonomous platforms are increasingly used as components of Integrated Ocean Observing Systems and oceanographic research cruises. Systems deployed can include gliders or propeller-driven autonomous underwater vessels (AUVs), autonomous surface vessels (ASVs), and unmanned aircraft systems (UAS). Prior field campaigns have demonstrated successful communication, sensor data fusion and visualization for studies using gliders and AUVs. However, additional requirements exist for incorporating ASVs and UASs into ship operations. For these systems to be optimally integrated into research vessel data management and operational planning systems involves addressing three key issues: real-time field data availability, platform coordination, and data archiving for later analysis. A fleet of AUVs, ASVs and UAS deployed from a research vessel is best operated as a system integrated with the ship, provided communications among them can be sustained. For this purpose, Disruptive Tolerant Networking (DTN) software protocols for operation in communication-challenged environments help ensure reliable high-bandwidth communications. Additionally, system components need to have considerable onboard autonomy, namely adaptive sampling capabilities using their own onboard sensor data stream analysis. We discuss Oceanographic Decision Support System (ODSS) software currently used for situational awareness and planning onshore, and in the near future event detection and response will be coordinated among multiple vehicles. Results from recent field studies from oceanographic research vessels using AUVs, ASVs and UAS, including the Rapid Environmental Picture (REP-12) cruise, are presented describing methods and results for use of multi-vehicle communication and deliberative control networks, adaptive sampling with single and multiple platforms, issues relating to data management and archiving, and finally challenges that remain in addressing these technological issues. Significantly, the

  20. Local quantum channels preserving classical correlations

    International Nuclear Information System (INIS)

    Guo Zhihua; Cao Huaixin

    2013-01-01

    The aim of this paper is to discuss local quantum channels that preserve classical correlations. First, we give two equivalent characterizations of classical correlated states. Then we obtain the relationships among classical correlation-preserving local quantum channels, commutativity-preserving local quantum channels and commutativity-preserving quantum channels on each subsystem. Furthermore, for a two-qubit system, we show the general form of classical correlation-preserving local quantum channels. (paper)

  1. A revolution in food preservation

    International Nuclear Information System (INIS)

    1986-01-01

    A brief consumer guide to food irradiation is presented. Aspects covered include some of the advantages of food irradiation compared to other methods of food preservation, the type of radiation used, the mechanism of action, some practical applications, safety and future benefits. (UK)

  2. Hardcore Heritage: imagination for preservation

    NARCIS (Netherlands)

    Rietveld, E.; Rietveld, R.

    2017-01-01

    Should the practice of the historic preservation of built and landscape heritage necessarily be based on conservation? Monuments, listed buildings, landscapes, and other forms of built heritage, are typically regarded as immutable and untouchable—objects to be “conserved”—and as a result tend to

  3. 2007 Preserve America Presidential Awards

    Science.gov (United States)

    aviation history museum that emphasizes people and culture as well as technology and events. With a the Private Preservation category, the two winners are: The History Channel, Save Our History Save Our History were Abbe Raven, president and CEO, A&E Television Networks; and Nancy Dubuc

  4. Yeasts preservation: alternatives for lyophilisation

    NARCIS (Netherlands)

    Nyanga, L.K.; Nout, M.J.R.; Smid, E.J.; Boekhout, T.; Zwietering, M.H.

    2012-01-01

    The aim of the study was to compare the effect of two low-cost, low technology traditional methods for drying starter cultures with standard lyophilisation. Lyophilised yeast cultures and yeast cultures preserved in dry rice cakes and dry plant fibre strands were examined for viable cell counts

  5. Beyond the Scope of Preservation?

    DEFF Research Database (Denmark)

    Rikke, Stenbro,; Riesto, Svava

    2014-01-01

    Why are some parts of the built environment protected as national heritage and others not? Listing is the most restrictive tool of Norwegian and Danish preservation in the built environment and creates a specific version of the past told through buildings and sites. The heritage authorities in both...

  6. Perforator plus flaps: Optimizing results while preserving function and esthesis

    Directory of Open Access Journals (Sweden)

    Mehrotra Sandeep

    2010-01-01

    Full Text Available Background: The tenuous blood supply of traditional flaps for wound cover combined with collateral damage by sacrifice of functional muscle, truncal vessels, or nerves has been the bane of reconstructive procedures. The concept of perforator plus flaps employs dual vascular supply to flaps. By safeguarding perforators along with supply from its base, robust flaps can be raised in diverse situations. This is achieved while limiting collateral damage and preserving nerves, vessels, and functioning muscle with better function and aesthesis. Materials and Methods: The perforator plus concept was applied in seven different clinical situations. Functional muscle and fasciocutaneous flaps were employed in five and adipofascial flaps in two cases, primarily involving lower extremity defects and back. Adipofascial perforator plus flaps were employed to provide cover for tibial fracture in one patients and chronic venous ulcer in another. Results: All flaps survived without any loss and provided long-term stable cover, both over soft tissue and bone. Functional preservation was achieved in all cases where muscle flaps were employed with no clinical evidence of loss of power. There was no sensory loss or significant oedema in or distal to the flap in both cases where neurovascular continuity was preserved during flap elevation. Fracture union and consolidation were satisfactory. One patient had minimal graft loss over fascia which required application of stored grafts with subsequent take. No patient required re-operation. Conclusions: Perforator plus concept is holistic and applicable to most flap types in varied situations. It permits the exercise of many locoregional flap options while limiting collateral functional damage. Aesthetic considerations are also addressed while raising adipofascial flaps because of no appreciable donor defects. With quick operating times and low failure risk, these flaps can be a better substitute to traditional flaps and at

  7. Parental Power and Adolescents' Parental Identification.

    Science.gov (United States)

    Acock, Alan C.; Yang, Wen Shan

    1984-01-01

    Combines McDonald's social power of parental identification with sex-linked models of parental identification to account for the identification of daughters (N=199) and sons (N=147) with their parents. Found that because of a halo effect, a gain in identification with one parent is not at the other parent's expense. (JAC)

  8. Modeling Scala Media as a Pressure Vessel

    Science.gov (United States)

    Lepage, Eric; Olofsson, A.˚Ke

    2011-11-01

    The clinical condition known as endolymphatic hydrops is the swelling of scala media and may result in loss in hearing sensitivity consistent with other forms of low-frequency biasing. Because outer hair cells (OHCs) are displacement-sensitive and hearing levels tend to be preserved despite large changes in blood pressure and CSF pressure, it seems unlikely that the OHC respond passively to changes in static pressures in the chambers. This suggests the operation of a major feedback control loop which jointly regulates homeostasis and hearing sensitivity. Therefore the internal forces affecting the cochlear signal processing amplifier cannot be just motile responses. A complete account of the cochlear amplifier must include static pressures. To this end we have added a third, pressure vessel to our 1-D 140-segment, wave-digital filter active model of cochlear mechanics, incorporating the usual nonlinear forward transduction. In each segment the instantaneous pressure is the sum of acoustic pressure and global static pressure. The object of the model is to maintain stable OHC operating point despite any global rise in pressure in the third chamber. Such accumulated pressure is allowed to dissipate exponentially. In this first 3-chamber implementation we explore the possibility that acoustic pressures are rectified. The behavior of the model is critically dependent upon scaling factors and time-constants, yet by initial assumption, the pressure tends to accumulate in proportion to sound level. We further explore setting of the control parameters so that the accumulated pressure either stays within limits or may rise without bound.

  9. Flaw distribution development from vessel ISI data

    International Nuclear Information System (INIS)

    Foulds, J.R.; Kennedy, E.L.; Basin, S.L.; Rosinski, S.T.

    1991-01-01

    Previous attempts to develop flaw distributions for use in the structural integrity evaluation of pressurized water reactor (PWR) vessels have aimed at the estimation of a ''generic'' distribution applicable to all vessels. In contrast, this paper describes the analysis of vessel-specific in-service inspection (ISI) data for the development of a flaw distribution reliably representative of the condition of the particular vessel inspected. The application of the methodology may be extended to other vessels, but has been primarily developed for PWR reactor vessels. For this study, the flaw data analyzed included data obtained from three recently performed PWR vessel ISIs and from laboratory inspection of selected weldment sections of the Midland reactor vessel. The variability in both the character of the reviewed data (size range of flaws, number of flaws) and the UT (ultrasonic test) inspection system performance identified a need for analyzing the inspection results on a vessel-, or data set-specific basis. For this purpose, traditional histogram-based methods were inadequate, and a new methodology that can accept a very small number of flaws (typical of vessel-specific ISI results) and that includes consideration of inspection system flaw detection reliability, flaw sizing accuracy and flaw detection threshold, was developed. Results of the application of the methodology to each of the four PWR reactor vessel cases studied are presented and discussed

  10. Hybrid Food Preservation Program Improves Food Preservation and Food Safety Knowledge

    Science.gov (United States)

    Francis, Sarah L.

    2014-01-01

    The growing trend in home food preservation raises concerns about whether the resulting food products will be safe to eat. The increased public demand for food preservation information led to the development of the comprehensive food preservation program, Preserve the Taste of Summer (PTTS). PTTS is a comprehensive hybrid food preservation program…

  11. Primo vessel inside a lymph vessel emerging from a cancer tissue.

    Science.gov (United States)

    Lee, Sungwoo; Ryu, Yeonhee; Cha, Jinmyung; Lee, Jin-Kyu; Soh, Kwang-Sup; Kim, Sungchul; Lim, Jaekwan

    2012-10-01

    Primo vessels were observed inside the lymph vessels near the caudal vena cava of a rabbit and a rat and in the thoracic lymph duct of a mouse. In the current work we found a primo vessel inside the lymph vessel that came out from the tumor tissue of a mouse. A cancer model of a nude mouse was made with human lung cancer cell line NCI-H460. We injected fluorescent nanoparticles into the xenografted tumor tissue and studied their flow in blood, lymph, and primo vessels. Fluorescent nanoparticles flowed through the blood vessels quickly in few minutes, and but slowly in the lymph vessels. The bright fluorescent signals of nanoparticles disappeared within one hour in the blood vessels but remained much longer up to several hours in the case of lymph vessels. We found an exceptional case of lymph vessels that remained bright with fluorescence up to 24 hours. After detailed examination we found that the bright fluorescence was due to a putative primo vessel inside the lymph vessel. This rare observation is consistent with Bong-Han Kim's claim on the presence of a primo vascular system in lymph vessels. It provides a significant suggestion on the cancer metastasis through primo vessels and lymph vessels. Copyright © 2012. Published by Elsevier B.V.

  12. What is cerebral small vessel disease?

    International Nuclear Information System (INIS)

    Onodera, Osamu

    2011-01-01

    An accumulating amount of evidence suggests that the white matter hyperintensities on T 2 weighted brain magnetic resonance imaging predict an increased risk of dementia and gait disturbance. This state has been proposed as cerebral small vessel disease, including leukoaraiosis, Binswanger's disease, lacunar stroke and cerebral microbleeds. However, the concept of cerebral small vessel disease is still obscure. To understand the cerebral small vessel disease, the precise structure and function of cerebral small vessels must be clarified. Cerebral small vessels include several different arteries which have different anatomical structures and functions. Important functions of the cerebral small vessels are blood-brain barrier and perivasucular drainage of interstitial fluid from the brain parenchyma. Cerebral capillaries and glial endfeet, take an important role for these functions. However, the previous pathological investigations on cerebral small vessels have focused on larger arteries than capillaries. Therefore little is known about the pathology of capillaries in small vessel disease. The recent discoveries of genes which cause the cerebral small vessel disease indicate that the cerebral small vessel diseases are caused by a distinct molecular mechanism. One of the pathological findings in hereditary cerebral small vessel disease is the loss of smooth muscle cells, which is an also well-recognized finding in sporadic cerebral small vessel disease. Since pericytes have similar character with the smooth muscle cells, the pericytes should be investigated in these disorders. In addition, the loss of smooth muscle cells may result in dysfunction of drainage of interstitial fluid from capillaries. The precise correlation between the loss of smooth muscle cells and white matter disease is still unknown. However, the function that is specific to cerebral small vessel may be associated with the pathogenesis of cerebral small vessel disease. (author)

  13. 46 CFR 4.03-40 - Public vessels.

    Science.gov (United States)

    2010-10-01

    ... INVESTIGATIONS Definitions § 4.03-40 Public vessels. Public vessel means a vessel that— (a) Is owned, or demise... Department (except a vessel operated by the Coast Guard or Saint Lawrence Seaway Development Corporation...

  14. Progress of ITER vacuum vessel

    Energy Technology Data Exchange (ETDEWEB)

    Ioki, K., E-mail: Kimihiro.Ioki@iter.org [ITER Organization, Route de Vinon sur Verdon, 13115 St Paul-lez-Durance (France); Bayon, A. [F4E, c/ Josep Pla, No. 2, Torres Diagonal Litoral, Edificio B3, E-08019 Barcelona (Spain); Choi, C.H.; Daly, E.; Dani, S.; Davis, J.; Giraud, B.; Gribov, Y.; Hamlyn-Harris, C.; Jun, C.; Levesy, B. [ITER Organization, Route de Vinon sur Verdon, 13115 St Paul-lez-Durance (France); Kim, B.C. [NFRI, 52 Yeoeundong Yuseonggu, Daejeon 305-333 (Korea, Republic of); Kuzmin, E. [NTC “Sintez”, Efremov Inst., 189631 Metallostroy, St. Petersburg (Russian Federation); Le Barbier, R.; Martinez, J.-M. [ITER Organization, Route de Vinon sur Verdon, 13115 St Paul-lez-Durance (France); Pathak, H. [ITER-India, A-29, GIDC Electronic Estate, Sector 25, Gandhinagar 382025 (India); Preble, J. [ITER Organization, Route de Vinon sur Verdon, 13115 St Paul-lez-Durance (France); Sa, J.W. [NFRI, 52 Yeoeundong Yuseonggu, Daejeon 305-333 (Korea, Republic of); Terasawa, A.; Utin, Yu. [ITER Organization, Route de Vinon sur Verdon, 13115 St Paul-lez-Durance (France); and others

    2013-10-15

    Highlights: ► This covers the overall status and progress of the ITER vacuum vessel activities. ► It includes design, R and D, manufacturing and approval process of the regulators. ► The baseline design was completed and now manufacturing designs are on-going. ► R and D includes ISI, dynamic test of keys and lip-seal welding/cutting technology. ► The VV suppliers produced full-scale mock-ups and started VV manufacturing. -- Abstract: Design modifications were implemented in the vacuum vessel (VV) baseline design in 2011–2012 for finalization. The modifications are mostly due to interface components, such as support rails and feedthroughs for the in-vessel coils (IVC). Manufacturing designs are being developed at the domestic agencies (DAs) based on the baseline design. The VV support design was also finalized and tests on scale mock-ups are under preparation. Design of the in-wall shielding (IWS) has progressed, considering the assembly methods and the required tolerances. Further modifications are required to be consistent with the DAs’ manufacturing designs. Dynamic tests on the inter-modular and stub keys to support the blanket modules are being performed to measure the dynamic amplification factor (DAF). An in-service inspection (ISI) plan has been developed and R and D was launched for ISI. Conceptual design of the VV instrumentation has been developed. The VV baseline design was approved by the agreed notified body (ANB) in accordance with the French Nuclear Pressure Equipment Order procedure.

  15. Progress of ITER vacuum vessel

    International Nuclear Information System (INIS)

    Ioki, K.; Bayon, A.; Choi, C.H.; Daly, E.; Dani, S.; Davis, J.; Giraud, B.; Gribov, Y.; Hamlyn-Harris, C.; Jun, C.; Levesy, B.; Kim, B.C.; Kuzmin, E.; Le Barbier, R.; Martinez, J.-M.; Pathak, H.; Preble, J.; Sa, J.W.; Terasawa, A.; Utin, Yu.

    2013-01-01

    Highlights: ► This covers the overall status and progress of the ITER vacuum vessel activities. ► It includes design, R and D, manufacturing and approval process of the regulators. ► The baseline design was completed and now manufacturing designs are on-going. ► R and D includes ISI, dynamic test of keys and lip-seal welding/cutting technology. ► The VV suppliers produced full-scale mock-ups and started VV manufacturing. -- Abstract: Design modifications were implemented in the vacuum vessel (VV) baseline design in 2011–2012 for finalization. The modifications are mostly due to interface components, such as support rails and feedthroughs for the in-vessel coils (IVC). Manufacturing designs are being developed at the domestic agencies (DAs) based on the baseline design. The VV support design was also finalized and tests on scale mock-ups are under preparation. Design of the in-wall shielding (IWS) has progressed, considering the assembly methods and the required tolerances. Further modifications are required to be consistent with the DAs’ manufacturing designs. Dynamic tests on the inter-modular and stub keys to support the blanket modules are being performed to measure the dynamic amplification factor (DAF). An in-service inspection (ISI) plan has been developed and R and D was launched for ISI. Conceptual design of the VV instrumentation has been developed. The VV baseline design was approved by the agreed notified body (ANB) in accordance with the French Nuclear Pressure Equipment Order procedure

  16. Proposal of In-vessel corium retention concept for Paks NPP

    International Nuclear Information System (INIS)

    Elter, J.; Toth, E.; Matejovic, P.

    2011-01-01

    The in-vessel corium retention (IVR) via external reactor vessel cooling (ERVC) seems to be a promising severe accident management strategy not only for new generation of advanced PWRs, but also for VVER-440/V213 reactors, which were designed several years ago. The basic idea of in-vessel retention of corium is to prevent RPV failure by flooding the reactor cavity so that the reactor pressure vessel is submerged in water up to its support structures, and thus the decay heat can be transferred from the corium pool through the vessel wall and into the water surrounding the vessel. An IVR concept with simple ECVR loop based only on minor modifications of existing plant technology was proposed for the Paks Nuclear Power Plant. 2 severe accident (LB and SB LOCA) without availability of HP and LP safety injection in power upgrade (108%) conditions were simulated using the ASTEC code. The analyses show that the proposed solution is effective in preserving RPV integrity in the case of severe accident. Possible uncertainties in code predictions are covered by the applied conservative assumptions

  17. Low-level efficacy of cosmetic preservatives

    DEFF Research Database (Denmark)

    Lundov, M D; Johansen, J D; Zachariae, C

    2011-01-01

    Preservation using combinations of preservatives has several advantages. This study shows that the concentration of some of the most frequently used allergenic preservatives can be markedly lowered when they are combined with phenoxyethanol. The antimicrobial efficacy of cosmetic preservatives...... of the preservatives indicated additive effects against the microorganisms. No combination of preservatives showed any inhibitory action on each other. Challenge tests with different concentrations and combinations were performed in a cosmetic cream. Diazolidinyl urea and MCI/MI alone were ineffective against C....... albicans in a challenge test at concentrations up to 16 times higher than the observed MIC values. When combining phenoxyethanol with either one of the allergenic preservatives diazolidinyl urea, MCI/MI or MI, the cosmetic cream was adequately preserved at concentrations well below the preservatives' MIC values as well...

  18. Applicability of JIS SPV 50 steel to primary containment vessel of nuclear power station

    International Nuclear Information System (INIS)

    Iida, Kunihiro; Ishikawa, Koji; Sakai, Keiichi; Onozuka, Masakazu; Sato, Makoto.

    1979-01-01

    The space within reactor containment vessels must be expanded in order to improve the reliability of nuclear power plants, accordingly the adoption of large reactor containment vessels is investigated. SGV 42 and 49 steels in JIS G 3118 have been used for containment vessels so far, but stress relief annealing is required when the thickness exceeds 38 mm. The time has come when the use of thicker conventional plates without stress relieving or the use of high strength steel must be examined in detail. In this study, the tests of confirming material properties were carried out on SPV 50 in JIS G 3115, Steels for pressure vessels, aiming at the method of fabrication without stress relieving. The highest and lowest temperatures in use were set at 171 deg and -8 deg C, respectively. The chemical composition and the mechanical properties of the plates tested, the method of welding, the results of tensile test on the parent metal and the welds, the required lowest preheating temperature, the fracture toughness at low temperature and the brittle fracture causing test are reported. The parent metal and the welded joints of SPV 50 have the properties suitable to reactor containment vessels, namely the sufficient fracture toughness to guarantee the prevention of unstable fracture when the method of welding without stress relieving is adopted. (Kako, I.)

  19. Nuclear reactor pressure vessel flaw distribution development

    International Nuclear Information System (INIS)

    Kennedy, E.L.; Foulds, J.R.; Basin, S.L.

    1991-12-01

    Previous attempts to develop flaw distributions for probabilistic fracture mechanics analyses of pressurized water reactor (PWR) vessels have aimed at the estimation of a ''generic'' distribution applicable to all PWR vessels. In contrast, this report describes (1) a new flaw distribution development analytic methodology that can be applied to the analysis of vessel-specific inservice inspection (ISI) data, and (2) results of the application of the methodology to the analysis of flaw data for each vessel case (ISI data on three PWR vessels and laboratory inspection data on sections of the Midland reactor vessel). Results of this study show significant variation among the flaw distributions derived from the various data sets analyzed, strongly suggesting than a vessel-specific flaw distribution (for vessel integrity prediction under pressurized thermal shock) is preferred over a ''generic'' distribution. In addition, quantitative inspection system flaw sizing accuracy requirements have been identified for developing a flaw distribution from vessel ISI data. The new flaw data analysis methodology also permits quantifying the reliability of the flaw distribution estimate. Included in the report are identified needs for further development of several aspects of ISI data acquisition and vessel integrity prediction practice

  20. Orbital preservation in a maxillectomy

    Energy Technology Data Exchange (ETDEWEB)

    Tanaka, Katsuhiko; Nishikawa, Hitomi; Kumagai, Masahiko; Dosaka, Yoshihiro; Kuroda, Toru; Atago, Yoshihiro; Nishio, Masamichi [Sapporo National Hospital (Japan)

    1999-07-01

    In the past 9 years, 38 patients of the maxillary cancer were treated by a combination of radiation and surgery. Sixteen patients showed the orbital involvement as confirmed by a CT scan and/or MRI. An orbital excenteration was necessary in 6 patients, due mainly to deep intraorbital invasion, while in 10, the orbital contents were preserved despite the involvement of the orbital capsule. The local rate of the orbital region in the latter patients evaluated at 48 months after the initial surgery was 44%. For the treatment of the recurrence at the orbital capsule. The application of gold grain (Au{sup 198}) thus appeared to be a useful tool for further preserving the eye. (author)

  1. Orbital preservation in a maxillectomy

    International Nuclear Information System (INIS)

    Tanaka, Katsuhiko; Nishikawa, Hitomi; Kumagai, Masahiko; Dosaka, Yoshihiro; Kuroda, Toru; Atago, Yoshihiro; Nishio, Masamichi

    1999-01-01

    In the past 9 years, 38 patients of the maxillary cancer were treated by a combination of radiation and surgery. Sixteen patients showed the orbital involvement as confirmed by a CT scan and/or MRI. An orbital excenteration was necessary in 6 patients, due mainly to deep intraorbital invasion, while in 10, the orbital contents were preserved despite the involvement of the orbital capsule. The local rate of the orbital region in the latter patients evaluated at 48 months after the initial surgery was 44%. For the treatment of the recurrence at the orbital capsule. The application of gold grain (Au 198 ) thus appeared to be a useful tool for further preserving the eye. (author)

  2. INCORRECT PRESERVATION OF AMPUTATED DIGITS

    Directory of Open Access Journals (Sweden)

    Uroš Ahčan

    2004-09-01

    Full Text Available Background. A decision to replant is critically dependent on the condition of the amputated digit and the way it was preserved during transport. The most common error is exposing the amputated digit to very low temperatures. Preservation directly on ice, on cooling devices in portable refrigerators, or on top of packets of frozen meat often result in a frozen and therefore unusable body digit.Methods. An inquiry questionnaire on correct methods of preservation of amputated digits was conducted on a sample of 30 lay persons, 30 medical students, and 15 physicians.Three simulations of most frequently used methods of preservation of amputated digit were conducted (the correct method; directly on ice; on cooling devices of portable refrigerators. Environment temperature of the (simulated amputated digits stored was measured.In a retrospective study, hospital records of patients treated at the Clinical department of plastic surgery and burns in Ljubljana between 1998 and 2002 were examined. We determined the number of replantations performed, gender of the patients, their age, the mechanism of the injury, the success rate of the replantation, and the duration of hospitalisation. In five case described in detail, we present an inadequate treatment of the amputated digits.Results. The results of the questionnaire survey show that no less than 86.7% of lay person respondents would have treated the injuries in an incorrect way; same holds for 43.4% students of medicine, and 33.3% of practicing physicians.The temperature of the simulated amputated digit remained above 5°C throughout the simulated correct treatment. When preserved directly on ice on or coolant bodies, the temperature dropped below the freezing point and never climbed above 0°C throughout the duration of the simulation (150 minutes.Between years 1998 and 2002, Clinical department of plastic surgery and burns at the University clinical centre Ljubljana admitted 124 injured persons with

  3. Nuclear Knowledge Preservation in Croatia

    International Nuclear Information System (INIS)

    Pleslic, S.; Novosel, N.

    2006-01-01

    Since the International Atomic Energy Agency (IAEA, Vienna, Austria) was founded in 1957 as an autonomous intergovernmental organization, it was authorized for exchange of technical and scientific information on peaceful uses of atomic energy. 35 years ago the International Nuclear Information System (INIS) was established from IAEA as an international bibliographic database in the nuclear field and in nuclear related areas. INIS as an instrument for a comprehensive and systematic dissemination of all information and knowledge becomes a big technological and science information system with 134 Members (114 countries and 20 international organizations). In INIS Membership Arrangements all Members are responsible for the collection, selection, description of information and providing the Agency with the full text of each item of non-conventional literature. Participation of each Member is important because decentralized information management is an operational philosophy of INIS. During all these years status of nuclear power changed significantly in the world. Some developing countries started to develop nuclear power programme and some developed countries showed tendency to decrease use of nuclear power. Anyway, expert knowledge accumulated over decades and the achievements in the field of nuclear science and technology have to be preserved and later transferred to future generations. It became obvious that the INIS is practically a pioneer in the area of nuclear knowledge preservation with well defined goals of knowledge preservation: selection of the most valuable information to convey to the future, ensuring that it remains accessible, readable and understandable and management of technological change. Main components of knowledge preservation are: selection of information for preservation including evaluation and prioritisation by value, use and risk, information capture (purchasing, copy, digitise, web links), describing, classifying, store and access

  4. Preserved entropy and fragile magnetism.

    Science.gov (United States)

    Canfield, Paul C; Bud'ko, Sergey L

    2016-08-01

    A large swath of quantum critical and strongly correlated electron systems can be associated with the phenomena of preserved entropy and fragile magnetism. In this overview we present our thoughts and plans for the discovery and development of lanthanide and transition metal based, strongly correlated systems that are revealed by suppressed, fragile magnetism, quantum criticality, or grow out of preserved entropy. We will present and discuss current examples such as YbBiPt, YbAgGe, YbFe2Zn20, PrAg2In, BaFe2As2, CaFe2As2, LaCrSb3 and LaCrGe3 as part of our motivation and to provide illustrative examples.

  5. Preservation of food and radiation

    International Nuclear Information System (INIS)

    Kasamatsu, Tomomichi

    1975-01-01

    In the application of radiation to preservation of food, there are some methods; sterilization, elimination of noxious insects, prevention of germination and control of maturation. The former two utilize the lethal effect of radiation to the living things and the latter two utilize the injurious effect on the metabolism of the living things. At present, irradiation to potato is most widely permitted for the purpose of prevention of germination, and the irradiation with 15 Krad (maximum) is allowed to preserve potato for 8 months in Japan. In the other hand, a large quantity of doses, such as 4.5 to 5.6 Mrad, is necessary to sterilize completely for industrial use, degeneration of food component and high cost come into question. In addition, food is directly taken into the mouth of human being, therefore, wholesomeness, legal permission and determination of dose must be examined. (Tsukamoto, Y.)

  6. IMPROVING THE QUALITY OF NEAR-INFRARED IMAGING OF IN VIVOBLOOD VESSELS USING IMAGE FUSION METHODS

    DEFF Research Database (Denmark)

    Jensen, Andreas Kryger; Savarimuthu, Thiusius Rajeeth; Sørensen, Anders Stengaard

    2009-01-01

    We investigate methods for improving the visual quality of in vivo images of blood vessels in the human forearm. Using a near-infrared light source and a dual CCD chip camera system capable of capturing images at visual and nearinfrared spectra, we evaluate three fusion methods in terms...... of their capability of enhancing the blood vessels while preserving the spectral signature of the original color image. Furthermore, we investigate a possibility of removing hair in the images using a fusion rule based on the "a trous" stationary wavelet decomposition. The method with the best overall performance...... with both speed and quality in mind is the Intensity Injection method. Using the developed system and the methods presented in this article, it is possible to create images of high visual quality with highly emphasized blood vessels....

  7. Food Preservation by Irradiation (Rev.)

    Energy Technology Data Exchange (ETDEWEB)

    Urrows, Grace M.

    1968-01-01

    Up to 30% of food harvests are lost in some parts of the world because of animal pests and microorganisms. Nuclear techniques can help reduce and extend the shelf life of these foods. Around 55 countries now have food irradiation programs. The use of radiation is the most recent step in man's attempts to preserve some of his harvest for the lean part of the year.

  8. Technical Information/Website Preservation

    Science.gov (United States)

    PintoRey, Christian R.

    2010-01-01

    This document reviews the work of the author in NASA's Motivating Undergraduates in Science and Technology (MUST) internship. The intern worked on the Space Shuttles hydraulic systems (i.e., Auxiliary Power Units (APU's) and Hydraulic Pump Units (HPU's)), and website preservation of the hydraulic technology captured in websites relating to the coming.the Space Shuttle Retirement. Several figures and pictures show an overview of the orbiter's hydraulic systems

  9. New method of preserving food

    Energy Technology Data Exchange (ETDEWEB)

    Carrard, G. (Australian Atomic Energy Commission Research Establishment, Lucas Heights)

    1983-07-01

    The use of gamma radiation for food preservation is discussed. Investigations at the AAEC include: the eradication of fruit-fly larvae in oranges, tomatoes and avocadoes; treatment of shrimps; extending the shelf life of mushrooms and potatoes; treatment of imported beans to prevent germination; killing of bacterial spores with a combination of pressure and gamma radiation; and the treatment of beehives containing honey-bee larvae with foulbrood.

  10. New method of preserving food

    International Nuclear Information System (INIS)

    Carrard, G.

    1983-01-01

    The use of gamma radiation for food preservation is discussed. Investigations at the AAEC include: the eradication of fruit-fly larvae in oranges, tomatoes and avocadoes; treatment of shrimps; extending the shelf life of mushrooms and potatoes; treatment of imported beans to prevent germination; killing of bacterial spores with a combination of pressure and gamma radiation; and the treatment of beehives containing honey-bee larvae with foulbrood

  11. ULTRAVIOLET TECHNOLOGY FOR FOOD PRESERVATION

    OpenAIRE

    Guedes, AMM; Novello, D; Mendes, GMD; Cristianini, M

    2009-01-01

    ULTRAVIOLET TECHNOLOGY FOR FOOD PRESERVATION This literature review article had as objective to gather information about ultraviolet (UV) technology utilization on the food industry, its effects and potential application. Aspects as the origin, concept and applications of the technology on the equipment industry and running mechanisms were approached. The application of UV radiation on food decontamination is still little used due its low penetration, but it is known that it can be easily app...

  12. The ZEUS data preservation project

    International Nuclear Information System (INIS)

    Malka, Janusz; Wichmann, Katarzyna

    2012-01-01

    A project to allow long term access and physics analysis of ZEUS data (ZEUS data preservation) has been established in collaboration with the DESY-IT group. In the ZEUS approach the analysis model is based on the Common Ntuple project, under development since 2006. The real data and all presently available Monte Carlo samples are being preserved in a flat ROOT ntuple format. There is ongoing work to provide the ability to simulate new, additional Monte Carlo samples also in the future. The validation framework of such a scheme using virtualisation techniques is being explored. The goal is to validate the frozen ZEUS software against future changes in hardware and operating system. A cooperation between ZEUS, DESY-IT and the library was established for document digitisation and long-term preservation of collaboration web pages. Part of the ZEUS internal documentation has already been stored within the HEP documentation system INSPIRE. Existing digital documentation, needed to perform physics analysis also in the future, is being centralised and completed.

  13. Phase-preserved optical elevator.

    Science.gov (United States)

    Luo, Yuan; Zhang, Baile; Han, Tiancheng; Chen, Zhi; Duan, Yubo; Chu, Chia-Wei; Barbastathis, George; Qiu, Cheng Wei

    2013-03-25

    The unique superiority of transformation optics devices designed from coordinate transformation is their capability of recovering both ray trajectory and optical path length in light manipulation. However, very few experiments have been done so far to verify this dual-recovery property from viewpoints of both ray trajectory and optical path length simultaneously. The experimental difficulties arise from the fact that most previous optical transformation optics devices only work at the nano-scale; the lack of intercomparison between data from both optical path length and ray trajectory measurement in these experiments obscured the fact that the ray path was subject to a subwavelength lateral shift that was otherwise not easily perceivable and, instead, was pointed out theoretically [B. Zhang et al. Phys. Rev. Lett. 104, 233903, 2010]. Here, we use a simple macroscopic transformation optics device of phase-preserved optical elevator, which is a typical birefringent optical phenomenon that can virtually lift an optical image by a macroscopic distance, to demonstrate decisively the unique optical path length preservation property of transformation optics. The recovery of ray trajectory is first determined with no lateral shift in the reflected ray. The phase preservation is then verified with incoherent white-light interferometry without ambiguity and phase unwrapping.

  14. Hydrogen storage in insulated pressure vessels

    Energy Technology Data Exchange (ETDEWEB)

    Aceves, S.M.; Garcia-Villazana, O. [Lawrence Livermore National Lab., CA (United States)

    1998-08-01

    Insulated pressure vessels are cryogenic-capable pressure vessels that can be fueled with liquid hydrogen (LH{sub 2}) or ambient-temperature compressed hydrogen (CH{sub 2}). Insulated pressure vessels offer the advantages of liquid hydrogen tanks (low weight and volume), with reduced disadvantages (lower energy requirement for hydrogen liquefaction and reduced evaporative losses). This paper shows an evaluation of the applicability of the insulated pressure vessels for light-duty vehicles. The paper shows an evaluation of evaporative losses and insulation requirements and a description of the current analysis and experimental plans for testing insulated pressure vessels. The results show significant advantages to the use of insulated pressure vessels for light-duty vehicles.

  15. Neutron Assay System for Confinement Vessel Disposition

    International Nuclear Information System (INIS)

    Frame, Katherine C.; Bourne, Mark M.; Crooks, William J.; Evans, Louise; Mayo, Douglas R.; Miko, David K.; Salazar, William R.; Stange, Sy; Valdez, Jose I.; Vigil, Georgiana M.

    2012-01-01

    Los Alamos National Laboratory has a number of spherical confinement vessels (CVs) remaining from tests involving nuclear materials. These vessels have an inner diameter of 6 feet with 1-inch thick steel walls. The goal of the Confinement Vessel Disposition (CVD) project is to remove debris and reduce contamination inside the CVs. The Confinement Vessel Assay System (CVAS) was developed to measure the amount of special nuclear material (SNM) in CVs before and after cleanout. Prior to cleanout, the system will be used to perform a verification measurement of each vessel. After cleanout, the system will be used to perform safeguards-quality assays of (le)100-g 239 Pu equivalent in a vessel for safeguards termination. The CVAS has been tested and calibrated in preparation for verification and safeguards measurements.

  16. Automatic Vessel Segmentation on Retinal Images

    Institute of Scientific and Technical Information of China (English)

    Chun-Yuan Yu; Chia-Jen Chang; Yen-Ju Yao; Shyr-Shen Yu

    2014-01-01

    Several features of retinal vessels can be used to monitor the progression of diseases. Changes in vascular structures, for example, vessel caliber, branching angle, and tortuosity, are portents of many diseases such as diabetic retinopathy and arterial hyper-tension. This paper proposes an automatic retinal vessel segmentation method based on morphological closing and multi-scale line detection. First, an illumination correction is performed on the green band retinal image. Next, the morphological closing and subtraction processing are applied to obtain the crude retinal vessel image. Then, the multi-scale line detection is used to fine the vessel image. Finally, the binary vasculature is extracted by the Otsu algorithm. In this paper, for improving the drawbacks of multi-scale line detection, only the line detectors at 4 scales are used. The experimental results show that the accuracy is 0.939 for DRIVE (digital retinal images for vessel extraction) retinal database, which is much better than other methods.

  17. Electrical discharge machining for vessel sample removal

    International Nuclear Information System (INIS)

    Litka, T.J.

    1993-01-01

    Due to aging-related problems or essential metallurgy information (plant-life extension or decommissioning) of nuclear plants, sample removal from vessels may be required as part of an examination. Vessel or cladding samples with cracks may be removed to determine the cause of cracking. Vessel weld samples may be removed to determine the weld metallurgy. In all cases, an engineering analysis must be done prior to sample removal to determine the vessel's integrity upon sample removal. Electrical discharge machining (EDM) is being used for in-vessel nuclear power plant vessel sampling. Machining operations in reactor coolant system (RCS) components must be accomplished while collecting machining chips that could cause damage if they become part of the flow stream. The debris from EDM is a fine talclike particulate (no chips), which can be collected by flushing and filtration

  18. Exponential Stabilization of an Underactuated Surface Vessel

    Directory of Open Access Journals (Sweden)

    Kristin Y. Pettersen

    1997-07-01

    Full Text Available The paper shows that a large class of underactuated vehicles cannot be asymptotically stabilized by either continuous or discontinuous state feedback. Furthermore, stabilization of an underactuated surface vessel is considered. Controllability properties of the surface vessels is presented, and a continuous periodic time-varying feedback law is proposed. It is shown that this feedback law exponentially stabilizes the surface vessel to the origin, and this is illustrated by simulations.

  19. Computerized reactor pressure vessel materials information system

    International Nuclear Information System (INIS)

    Strosnider, J.; Monserrate, C.; Kenworthy, L.D.; Tether, C.D.

    1980-10-01

    A computerized information system for storage and retrieval of reactor pressure vessel materials data was established, as part of Task Action Plan A-11, Reactor Vessel Materials Toughness. Data stored in the system are necessary for evaluating the resistance of reactor pressure vessels to flaw-induced fracture. This report includes (1) a description of the information system; (2) guidance on accessing the system; and (3) a user's manual for the system

  20. Fertility Preservation for Children Diagnosed with Cancer

    Medline Plus

    Full Text Available ... fertility preservation is important. These key points can help start the conversation: Cancer and cancer treatment may ... several resources listed on the reverse that can help you locate a fertility preservation specialist to discuss ...

  1. Fertility Preservation for Children Diagnosed with Cancer

    Medline Plus

    Full Text Available ... fertility preservation center closest to you Visit the Pediatric Oncofertility Research Foundation Visit the Patient Navigator Website ... Ginsberg JP. New advances in fertility preservation for pediatric cancer patients. Curr Opin Pediatr. 2010;23:9- ...

  2. 76 FR 60754 - Preserving the Open Internet

    Science.gov (United States)

    2011-09-30

    ...-201] Preserving the Open Internet AGENCY: Federal Communications Commission. ACTION: Final rule..., 2011, a document establishing rules to preserve the open Internet. Inadvertently the wrong paragraph... alleging violations of the open Internet rules. Federal Communications Commission. Matt Warner, Attorney...

  3. Fertility Preservation for Children Diagnosed with Cancer

    Medline Plus

    Full Text Available ... available and having your child see a reproductive specialist in a timely manner can improve their future ... Can you refer us to a fertility preservation specialist to discuss my child’s options further? Fertility Preservation - ...

  4. A Holistic Approach to Bit Preservation

    DEFF Research Database (Denmark)

    Zierau, Eld Maj-Britt Olmütz

    2011-01-01

    This thesis presents three main results for a holistic approach to bit preservation, where the ultimate goal is to find the optimal bit preservation strategy for specific digital material that must be digitally preserved. Digital material consists of sequences of bits, where a bit is a binary digit...... which can have the value 0 or 1. Bit preservation must ensure that the bits remain intact and readable in the future, but bit preservation is not concerned with how bits can be interpreted as e.g. an image. A holistic approach to bit preservation includes aspects that influence the final choice of a bit...... a holistic approach and include aspects of digital representation, confidentiality, availability, bit safety and costs when defining requirements for the bit preservation. Analysis of such requirements and choice of the final bit preservation solution can be supported by the three main results presented...

  5. Prolonged platelet preservation by transient metabolic suppression

    NARCIS (Netherlands)

    Badlou, Bahram Alamdary

    2006-01-01

    Introduction: Different clinical studies have shown that transfusion of stored platelets results in better haemostasis in patients with thrombocytopenia with and without a platelet function defect. Objectives: Current preservation procedures aim to optimally preserve the metabolic status of

  6. Fertility Preservation for Children Diagnosed with Cancer

    Medline Plus

    Full Text Available ... JP, Kolon TF. Fertility Preservation in Children and Adolescents With Cancer . Urology. 2016;91:190-6. Loren ... 10. Nieman CL, et al. Fertility preservation and adolescent cancer patients: lessons from adult survivors of childhood ...

  7. Fertility Preservation for Children Diagnosed with Cancer

    Medline Plus

    Full Text Available ... be fertility preservation options available and having your child see a reproductive specialist in a timely manner ... there are options for preserving fertility in your child diagnosed with cancer. You may be focused on ...

  8. How to replace a reactor pressure vessel

    International Nuclear Information System (INIS)

    Huber, R.

    1996-01-01

    A potential life extending procedure for a nuclear reactor after, say, 40 years of service life, might in some circumstances be the replacement of the reactor pressure vessel. Neutron induced degradation of the vessel might make replacement by one of a different material composition desirable, for example. Although the replacement of heavy components, such as steam generators, has been possible for many years, the pressure vessel presents a much more demanding task if only because it is highly irradiated. Some preliminary feasibility studies by Siemens are reported for the two removal strategies that might be considered. These are removal of the entire pressure vessel in one piece and dismantling it into sections. (UK)

  9. Prestressed reactor vessel for nuclear power plants

    International Nuclear Information System (INIS)

    Schoening, J.; Schwiers, H.G.

    1982-01-01

    With usual pressure vessels for nuclear reactor plants, especially for gas-cooled nuclear reactors, the load occurring due to the inner overpressure, especially the tensile load affecting the vessel top and/or bottom, their axis of inertia being horizontal, shall be compensated without a supplementary modification in design of the top and/or the bottom. This is attained by choosing an appropriate prestressing system of the vessel wall in the field the top and/or the bottom, so that the top and/or the bottom form a tension vault directed towards the interior of the vessel. (orig.) [de

  10. Reactor vessel decommissioning project. Final report

    International Nuclear Information System (INIS)

    Schoonen, D.H.

    1984-09-01

    This report describes a reactor vessel decommissioning project; it documents and explains the project objectives, scope, performance results, and sodium removal process. The project was successfully completed in FY-1983, within budget and without significant problems or adverse impact on the environment. Waste generated by the operation included the reactor vessel, drained sodium, and liquid, solid, and gaseous wastes which were significantly less than project estimates. Personnel radiation exposures were minimized, such that the project total was one-half the predicted exposure level. Except for the sodium removed, the material remaining in the reactor vessel is essentially the same as when the vessel arrived for processing

  11. Safety vessels for explosive fusion reactor

    International Nuclear Information System (INIS)

    Mineev, V.

    1994-01-01

    The failure of several types of geometrically similar cylindrical and spherical steel and glass fibers vessels filled with water or air was investigated when an explosive charge of TNT was detonated in the center. Vessels had radius 50-1000 mm, thickness of walls 2-20%. The detonation on TNT imitated energy release. The parameter: K = M/mf is a measure of the strength of the vessel where M is the mass of the vessel, and mf is the mass of TNT for which the vessel fails. This demanded 2-4 destroyed and nondestroyed shots. It may be showed that: K=A/σ f where σ f is the fracture stress of the material vessel, and A = const = F(energy TNT, characteristic of elasticity of vessel material). The chief results are the following: (1) A similar increase in the geometrical dimensions of steel vessels by a factor of 10 leads to the increase of parameter K in about 5 times and to decrease of failure deformation in 7 times (scale effect). (2) For glass fibers, scale effect is absent. (3) This problem is solved in terms of theory energetic scale effect. (4) The concept of TNT equivalent explosive makes it possible to use these investigations to evaluate the response of safety vessels for explosive fusion reactor

  12. Determinants of injuries in passenger vessel accidents.

    Science.gov (United States)

    Yip, Tsz Leung; Jin, Di; Talley, Wayne K

    2015-09-01

    This paper investigates determinants of crew and passenger injuries in passenger vessel accidents. Crew and passenger injury equations are estimated for ferry, ocean cruise, and river cruise vessel accidents, utilizing detailed data of individual vessel accidents that were investigated by the U.S. Coast Guard during the time period 2001-2008. The estimation results provide empirical evidence (for the first time in the literature) that crew injuries are determinants of passenger injuries in passenger vessel accidents. Copyright © 2015 Elsevier Ltd. All rights reserved.

  13. Increase of cyclic durability of pressure vessels

    International Nuclear Information System (INIS)

    Vorona, V.A.; Zvezdin, Yu.I.

    1980-01-01

    The durability of multilayer pressure vessels under cyclic loading is compared with single-layer vessels. The relative conditional durability is calculated taking into account the assumption on the consequent destruction of layers and viewing a vessel wall as an indefinite plate. It is established that the durability is mainly determined by the number of layers and to a lesser degree depends on the relative size of the defect for the given layer thickness. The advantage of the multilayer vessels is the possibility of selecting layer materials so that to exclude the effect of agressive corrosion media on the strength [ru

  14. Vessel size measurements in angiograms: Manual measurements

    International Nuclear Information System (INIS)

    Hoffmann, Kenneth R.; Dmochowski, Jacek; Nazareth, Daryl P.; Miskolczi, Laszlo; Nemes, Balazs; Gopal, Anant; Wang Zhou; Rudin, Stephen; Bednarek, Daniel R.

    2003-01-01

    Vessel size measurement is perhaps the most often performed quantitative analysis in diagnostic and interventional angiography. Although automated vessel sizing techniques are generally considered to have good accuracy and precision, we have observed that clinicians rarely use these techniques in standard clinical practice, choosing to indicate the edges of vessels and catheters to determine sizes and calibrate magnifications, i.e., manual measurements. Thus, we undertook an investigation of the accuracy and precision of vessel sizes calculated from manually indicated edges of vessels. Manual measurements were performed by three neuroradiologists and three physicists. Vessel sizes ranged from 0.1-3.0 mm in simulation studies and 0.3-6.4 mm in phantom studies. Simulation resolution functions had full-widths-at-half-maximum (FWHM) ranging from 0.0 to 0.5 mm. Phantom studies were performed with 4.5 in., 6 in., 9 in., and 12 in. image intensifier modes, magnification factor = 1, with and without zooming. The accuracy and reproducibility of the measurements ranged from 0.1 to 0.2 mm, depending on vessel size, resolution, and pixel size, and zoom. These results indicate that manual measurements may have accuracies comparable to automated techniques for vessels with sizes greater than 1 mm, but that automated techniques which take into account the resolution function should be used for vessels with sizes smaller than 1 mm

  15. Vessels for elevated temperature service

    International Nuclear Information System (INIS)

    O'Donnell, W.J.; Porowski, J.S.

    1983-01-01

    The subject is covered in chapters, entitled: introduction (background; elevated temperature concerns; design tools); design of pressure vessels for elevated temperature per ASME code; basic elevated temperature failure modes; allowable stresses and strains per ASME code (basic allowable stress limits; ASME code limits for bending; time-fraction summations; strain limits; buckling and instability; negligible creep and stress-rupture effects); combined membrane and bending stresses in creep regime; thermal stress cycles; bounding methods based on elastic core concept (bounds on accumulated strains; more accurate bounds; strain ranges; maximum stresses; strains at discontinuities); elastic follow-up; creep strain concentrations; time-dependent fatigue (combined creep rupture and fatigue damage; limits for inelastic design analyses; limits for elastic design analyses); flaw evaluation techniques; type 316 stainless steel; type 304 stainless steel; steel 2 1/4Cr1Mo; Inconel 718; Incolloy 800; Hastelloy X; detailed inelastic design analyses. (U.K.)

  16. Milestones in pressure vessel technology

    International Nuclear Information System (INIS)

    Spence, J.; Nash, D.H.

    2004-01-01

    The progress of pressure vessel technology over the years has been influenced by many important events. This paper identifies a number of 'milestones' which have provided a stimulus to analysis methods, manufacturing, operational processes and new pressure equipment. The formation of a milestone itself along with its subsequent development is often critically dependent on the work of many individuals. It is postulated that such developments takes place in cycles, namely, an initial idea, followed sometimes by unexpected failures, which in turn stimulate analysis or investigation, and when confidence is established, followed finally by the emergence of codes ad standards. Starting from the industrial revolution, key milestones are traced through to the present day and beyond

  17. Reactor pressure vessel thermal annealing

    International Nuclear Information System (INIS)

    Lee, A.D.

    1997-01-01

    The steel plates and/or forgings and welds in the beltline region of a reactor pressure vessel (RPV) are subject to embrittlement from neutron irradiation. This embrittlement causes the fracture toughness of the beltline materials to be less than the fracture toughness of the unirradiated material. Material properties of RPVs that have been irradiated and embrittled are recoverable through thermal annealing of the vessel. The amount of recovery primarily depends on the level of the irradiation embrittlement, the chemical composition of the steel, and the annealing temperature and time. Since annealing is an option for extending the service lives of RPVs or establishing less restrictive pressure-temperature (P-T) limits; the industry, the Department of Energy (DOE) and the Nuclear Regulatory Commission (NRC) have assisted in efforts to determine the viability of thermal annealing for embrittlement recovery. General guidance for in-service annealing is provided in American Society for Testing and Materials (ASTM) Standard E 509-86. In addition, the American Society of Mechanical Engineers (ASME) Code Case N-557 addresses annealing conditions (temperature and duration), temperature monitoring, evaluation of loadings, and non-destructive examination techniques. The NRC thermal annealing rule (10 CFR 50.66) was approved by the Commission and published in the Federal Register on December 19, 1995. The Regulatory Guide on thermal annealing (RG 1.162) was processed in parallel with the rule package and was published on February 15, 1996. RG 1.162 contains a listing of issues that need to be addressed for thermal annealing of an RPV. The RG also provides alternatives for predicting re-embrittlement trends after the thermal anneal has been completed. This paper gives an overview of methodology and recent technical references that are associated with thermal annealing. Results from the DOE annealing prototype demonstration project, as well as NRC activities related to the

  18. Parenting Styles and Beliefs about Parental Authority.

    Science.gov (United States)

    Smetana, Judith G.

    1994-01-01

    Suggests that models of parenting style, such as Baumrind's popular model, are insensitive to variations in parenting resulting from characteristics of the different situations in which the parenting is expressed. Argues that considering parenting in context adds greater specificity to the model and enhances the potential for predicting child…

  19. Preservation management for libraries, archives and museums

    CERN Document Server

    Gorman, G E

    2006-01-01

    Memory institutions such as libraries, archives, galleries and museums all share pressing concerns about preserving heritage. This book charts the diversity of preservation management in the contemporary information landscape, and offers guidance on preservation methods for the sustainability of collections from a range of international experts.

  20. Orthogonality preserving infinite dimensional quadratic stochastic operators

    International Nuclear Information System (INIS)

    Akın, Hasan; Mukhamedov, Farrukh

    2015-01-01

    In the present paper, we consider a notion of orthogonal preserving nonlinear operators. We introduce π-Volterra quadratic operators finite and infinite dimensional settings. It is proved that any orthogonal preserving quadratic operator on finite dimensional simplex is π-Volterra quadratic operator. In infinite dimensional setting, we describe all π-Volterra operators in terms orthogonal preserving operators

  1. Fertility Preservation for Children Diagnosed with Cancer

    Medline Plus

    Full Text Available ... website. Skip to main content SaveMyFertility An Online Fertility Preservation Toolkit for Patients and Their Providers Open ... Diagnosed with Cancer You are here Home » Patients Fertility Preservation for Children Diagnosed with Cancer Fertility Preservation ...

  2. Fertility Preservation for Children Diagnosed with Cancer

    Medline Plus

    Full Text Available ... Skip to main content SaveMyFertility An Online Fertility Preservation Toolkit for Patients and Their Providers Open menu ... with Cancer You are here Home » Patients Fertility Preservation for Children Diagnosed with Cancer Fertility Preservation for ...

  3. 32 CFR 174.18 - Historic preservation.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 1 2010-07-01 2010-07-01 false Historic preservation. 174.18 Section 174.18... Historic preservation. (a) The transfer, lease, or sale of National Register-eligible historic property to... the regulations implementing the National Historic Preservation Act (36 CFR 800.5(a)(2)(vii)). One way...

  4. 76 FR 74721 - Preserving the Open Internet

    Science.gov (United States)

    2011-12-01

    ...; Report No. 2936] Preserving the Open Internet AGENCY: Federal Communications Commission. ACTION: Final... for broadband service to preserve and reinforce Internet freedom and openness. DATES: Oppositions to... applicability. Subject: In the Matter of Preserving the Open Internet, Broadband Industry Practices, published...

  5. Comprehensive preserving technique for Chinese chestnut storage

    International Nuclear Information System (INIS)

    Chen Yuntang; Yang Baoan; Zhang Jianwei; Li Qiufang

    2003-01-01

    Chinese chestnut can be preserved for a long time by using a comprehensive preserving technique, which consists of casing, irradiating, treating with preserving agent and controlling environment conditions. The shelftime of the treated chestnuts reaches 11 months keeping no insects, no germination and good quality for eating with the good fruit ratio of 97.5% and water losing ratio of 3.8%

  6. A holistic approach to bit preservation

    DEFF Research Database (Denmark)

    Zierau, Eld

    2012-01-01

    Purpose: The purpose of this paper is to point out the importance of taking a holistic approach to bit preservation when setting out to find an optimal bit preservation solution for specific digital materials. In the last decade there has been an increasing awareness that bit preservation, which ...

  7. External cooling: The SWR 1000 severe accident management strategy. Part 1: motivation, strategy, analysis: melt phase, vessel integrity during melt-water interaction

    International Nuclear Information System (INIS)

    Kolev, Nikolay Ivanov

    2004-01-01

    This paper provides the description of the basics behind design features for the severe accident management strategy of the SWR 1000. The hydrogen detonation/deflagration problem is avoided by containment inertization. In-vessel retention of molten core debris via water cooling of the external surface of the reactor vessel is the severe accident management concept of the SWR 1000 passive plant. During postulated bounding severe accidents, the accident management strategy is to flood the reactor cavity with Core Flooding Pool water and to submerge the reactor vessel, thus preventing vessel failure in the SWR 1000. Considerable safety margins have determined by using state of the art experiment and analysis: regarding (a) strength of the vessel during the melt relocation and its interaction with water; (b) the heat flux at the external vessel wall; (c) the structural resistance of the hot structures during the long term period. Ex-vessel events are prevented by preserving the integrity of the vessel and its penetrations and by assuring positive external pressure at the predominant part of the external vessel in the region of the molten corium pool. Part 1 describes the motivation for selecting this strategy, the general description of the strategy and the part of the analysis associated with the vessel integrity during the melt-water interaction. (author)

  8. Structural analysis of the KSTAR vacuum vessel

    Energy Technology Data Exchange (ETDEWEB)

    In, Sang Ryul; Yoon, Byeong Joo [Korea Atomic Energy Research Institute, Taejon (Korea)

    1998-10-01

    Structure analysis of the vacuum vessel for the KSTAR tokamak which, is in the end phase of the conceptual design have been performed. Mechanical stresses and deformations of the vessel produced by constant forces due to atmospheric pressure, dead weight, fluid pressure, etc and various transient electromagnetic forces induced during tokamak operations were calculated as well as modal characteristics and buckling properties were investigated. Influences of the temperature gradient and the constraint condition of the support on the thermal stress and deformation of the vessel were analyzed. The thermal stress due to the temperature distribution on the vessel as supplying the N{sub 2} gas of 400 deg C through poloidal channels according to the recent baking concept were calculated. No severe problem in the robustness of the vessel was found when applying the constant pressures on the vessel. However the mechanical stress due to the EM force induced by halo currents flowing on the vessel and the plasma facing components (PFCs) far exceeded the allowable limit. Some reinforcing components should be added on the boundary of the PFC support and the vessel, and that of the vessel support and the vessel. A steep temperature gradient in the vicinity of the inlet and oulet of the heating gas produced a thermal stress much higher than allowable. It is necessary to make the temperature of the vessel as uniform as possible and to develop a new support concept which is flexible enough to accommodate a thermal expansion of a few cm while sufficiently strong to resist mechanical impacts. (author). 5 refs., 41 figs., 9 tabs.

  9. Coronary collateral vessels in patients with previous myocardial infarction

    International Nuclear Information System (INIS)

    Nakatsuka, M.; Matsuda, Y.; Ozaki, M.

    1987-01-01

    To assess the degree of collateral vessels after myocardial infarction, coronary angiograms, left ventriculograms, and exercise thallium-201 myocardial scintigrams of 36 patients with previous myocardial infarction were reviewed. All 36 patients had total occlusion of infarct-related coronary artery and no more than 70% stenosis in other coronary arteries. In 19 of 36 patients with transient reduction of thallium-201 uptake in the infarcted area during exercise (Group A), good collaterals were observed in 10 patients, intermediate collaterals in 7 patients, and poor collaterals in 2 patients. In 17 of 36 patients without transient reduction of thallium-201 uptake in the infarcted area during exercise (Group B), good collaterals were seen in 2 patients, intermediate collaterals in 7 patients, and poor collaterals in 8 patients (p less than 0.025). Left ventricular contractions in the infarcted area were normal or hypokinetic in 10 patients and akinetic or dyskinetic in 9 patients in Group A. In Group B, 1 patient had hypokinetic contraction and 16 patients had akinetic or dyskinetic contraction (p less than 0.005). Thus, patients with transient reduction of thallium-201 uptake in the infarcted area during exercise had well developed collaterals and preserved left ventricular contraction, compared to those in patients without transient reduction of thallium-201 uptake in the infarcted area during exercise. These results suggest that the presence of viable myocardium in the infarcted area might be related to the degree of collateral vessels

  10. Radiation preservation of cooked foods

    International Nuclear Information System (INIS)

    Aurangzeb; Bibi, N.; Badshah, A.; Khan, I.

    1989-01-01

    The preservation of irradiated cooked food has been explained in this report under vacuum conditions. The samples were irradiated at dose levels of 7.5 and 10.0 LGy. Measurement of fungal count was carried immediately after irradiation and after each 15 days of storage life upto 60 days of time interval. The samples were evaluated organolepticaly as well. It has been observed that no significance difference was observed among samples of irradiated and vacuum packed controls during storage for 45 days. (A.B.)

  11. Polarization preservation in the AGS

    International Nuclear Information System (INIS)

    Ratner, L.G.

    1983-01-01

    The successful operation of a high energy polarized beam at the Argonne Zero Gradient Synchrotron (ZGS) with the concommitant development of depolarizing resonance correction techniques has led to the present project of commissioning such a beam at the Brookhaven Alternating Gradient Synchrotron (AGS). A description of the project was presented at the 1981 National Accelerator Conference. I would like to now present a more detailed description of how we plan to preserve the polarization during acceleration, and to present our game plan for tuning through some 50 resonances and reaching our goal of a 26 GeV polarized proton beam with greater than 60% polarization

  12. Tensor Train Neighborhood Preserving Embedding

    Science.gov (United States)

    Wang, Wenqi; Aggarwal, Vaneet; Aeron, Shuchin

    2018-05-01

    In this paper, we propose a Tensor Train Neighborhood Preserving Embedding (TTNPE) to embed multi-dimensional tensor data into low dimensional tensor subspace. Novel approaches to solve the optimization problem in TTNPE are proposed. For this embedding, we evaluate novel trade-off gain among classification, computation, and dimensionality reduction (storage) for supervised learning. It is shown that compared to the state-of-the-arts tensor embedding methods, TTNPE achieves superior trade-off in classification, computation, and dimensionality reduction in MNIST handwritten digits and Weizmann face datasets.

  13. A computational algorithm addressing how vessel length might depend on vessel diameter

    Science.gov (United States)

    Jing Cai; Shuoxin Zhang; Melvin T. Tyree

    2010-01-01

    The objective of this method paper was to examine a computational algorithm that may reveal how vessel length might depend on vessel diameter within any given stem or species. The computational method requires the assumption that vessels remain approximately constant in diameter over their entire length. When this method is applied to three species or hybrids in the...

  14. Vessel classification method based on vessel behavior in the port of Rotterdam

    NARCIS (Netherlands)

    Zhou, Y.; Daamen, W.; Vellinga, T.; Hoogendoorn, S.P.

    2015-01-01

    AIS (Automatic Identification System) data have proven to be a valuable source to investigate vessel behavior. The analysis of AIS data provides a possibility to recognize vessel behavior patterns in a waterway area. Furthermore, AIS data can be used to classify vessel behavior into several

  15. [Key vessels assessment and operation highlights in laparoscopic extended right hemicolectomy].

    Science.gov (United States)

    Wang, Hao; Zhao, Quanquan

    2018-03-25

    Laparoscopic radical colectomies have been more widely used gradually, among which laparoscopic extended right hemicolectomy is considered as the most difficult procedure. The difficulty of extended right hemicolectomy lies in the need to dissect lymph nodes along the superior mesenteric vein (SMV) and disconnect numerous and possible aberrant vessels. To address this problem, we emphasize two points in key vessel assessment: getting familiar with the anatomy along the medial-to-lateral approach and having a good understanding about the preoperative imaging presentations. An accurately preoperative imaging assessment by abdominal enhanced CT can help the surgeon understand the relative position of the key vessels to be dealt with during operation and the situation of the possible aberrant vessels so as to guide the procedure more effectively and facilitate the prevention and management of the intraoperative complications. During operation, the operator should pay special attention to the management of the vessels in the ileocolic vessel region, Henle's trunk and middle colon vessels. The operation highlights of the key vessels are as follows: (1) The ileocolic vessels: identifying the Toldt's gap correctly and opening the vascular sheath of the SMV securely; making sure that the duodenum is well protected. (2) Henle's trunk: dissecting along the surface of the Henle's trunk; preserving the anterior superior pancreaticoduodenal vein (ASPDV) and main trunk of the Henle's trunk; disconnecting the roots of the right colic vein (RCV) and right gastroepiploic vein (RGEV), and then dissecting lymph nodes along the surface of the pancreas. (3) The middle colon vessels: identifying the root of the middle colon vessel along the lower edge of the pancreas; avoiding entering behind the pancreas; mobilizing the transverse mesocolon sufficiently along the surface of the pancreas. Finally, we discuss and analyze the disputes currently existing in laparoscopic extended right

  16. Modelling the Costs of Preserving Digital Assets

    DEFF Research Database (Denmark)

    Kejser, Ulla Bøgvad; Nielsen, Anders Bo; Thirifays, Alex

    2012-01-01

    Information is increasingly being produced in digital form, and some of it must be preserved for the longterm. Digital preservation includes a series of actively managed activities that require on-going funding. To obtain sufficient resources, there is a need for assessing the costs...... and the benefits accrued by preserving the assets. Cost data is also needed for optimizing activities and comparing the costs of different preservation alternatives. The purpose of this study is to analyse generic requirements for modelling the cost of preserving digital assets. The analysis was based...

  17. Nuclear reactor with a suspended vessel

    International Nuclear Information System (INIS)

    Lemercier, Guy.

    1977-01-01

    This invention relates to a nuclear reactor with a suspended vessel and applies in particular when this is a fast reactor, the core or active part of the reactor being inside the vessel and immersed under a suitable volume of flowing liquid metal to cool it by extracting the calories released by the nuclear fission in the fuel assemblies forming this core [fr

  18. Fabrication of Separator Demonstration Facility process vessel

    International Nuclear Information System (INIS)

    Oberst, E.F.

    1985-01-01

    The process vessel system is the central element in the Separator Development Facility (SDF). It houses the two major process components, i.e., the laser-beam folding optics and the separators pods. This major subsystem is the critical-path procurement for the SDF project. Details of the vaious parts of the process vessel are given

  19. Irradiation embrittlement of reactor vessel steels

    International Nuclear Information System (INIS)

    Bros, J.

    2000-01-01

    From the historical decision of closing the Yankee Rowe NPP because of the uncertainties on the level of reactor pressure vessel neutron embrittlement, this paper reviews the technical-scientist bases of the degradation phenomena, and refers to the evolution of reactor pressure vessel radiation surveillance programs. (Author)

  20. Ultrasound periodic inspections of reactor pressure vessels

    International Nuclear Information System (INIS)

    Haniger, L.

    1980-01-01

    Two versions are described of ultrasonic equipment for periodic inspections of reactor pressure vessels. One uses the principle of exchangeable programmators with solid-state logic while the other uses programmable logic with semiconductor memories. The equipment is to be used for inspections of welded joints on the upper part of the V-1 reactor pressure vessel. (L.O.)

  1. Elastic plastic buckling of elliptical vessel heads

    International Nuclear Information System (INIS)

    Alix, M.; Roche, R.L.

    1981-08-01

    The risks of buckling of dished vessel head increase when the vessel is thin walled. This paper gives the last results on experimental tests of 3 elliptical heads and compares all the results with some empirical formula dealing with elastic and plastic buckling

  2. Analyzing Vessel Behavior Using Process Mining

    NARCIS (Netherlands)

    Maggi, F.M.; Mooij, A.J.; Aalst, W.M.P. van der

    2013-01-01

    In the maritime domain, electronic sensors such as AIS receivers and radars collect large amounts of data about the vessels in a certain geographical area. We investigate the use of process mining techniques for analyzing the behavior of the vessels based on these data. In the context of maritime

  3. OAIS and Distributed Digital Preservation in Practice

    DEFF Research Database (Denmark)

    Zierau, Eld

    The aim of the paper is to illustrate how the distributed aspects of digital preservation can be aligned in practice, with the concepts and principles of the Open Archival Information System (OAIS) Reference Model. There has been a growing awareness within the digital preservation community...... of the need for cooperation between organizations to address digital preservation requirements. One common example is that replicas of preservation copies of digital objects need to be independently preserved (e.g., stored, managed, monitored, documented) to ensure that at least one correct replica...... will survive for as long as needed. Such independence can be achieved through distributed digital preservation that relies upon specific agreements between participating and contributing organizations. The OAIS Reference Model does not address the challenges of distributed digital preservation in detail...

  4. Preservation of forest wood chips

    Energy Technology Data Exchange (ETDEWEB)

    Kofman, P.D.; Thomsen, I.M.; Ohlsson, C.; Leer, E.; Ravn Schmidt, E.; Soerensen, M.; Knudsen, P.

    1999-01-01

    As part of the Danish Energy Research Programme on biomass utilisation for energy production (EFP), this project concerns problems connected to the handling and storing of wood chips. In this project, the possibility of preserving wood chips of the Norway Spruce (Picea Abies) is addressed, and the potential improvements by anaerobic storage are tested. Preservation of wood chips aims at reducing dry matter losses from extensive heating during storage and to reduce production of fungal spores. Fungal spores pose a health hazards to workers handling the chips. Further the producers of wood chips are interested in such a method since it would enable them to give a guarantee for the delivery of homogeneous wood chips also during the winter period. Three different types of wood chips were stored airtight and further one of these was stored in accordance with normal practise and use as reference. The results showed that airtight storage had a beneficial impact on the quality of the chips: no redistribution of moisture, low dry matter losses, unfavourable conditions for microbial activity of most fungi, and the promotion of yeasts instead of fungi with airborne spores. Likewise the firing tests showed that no combustion problems, and no increased risk to the environment or to the health of staff is caused by anaerobic storage of wood chips. In all, the tests of the anaerobic storage method of forest wood chips were a success and a large-scale test of the method will be carried out in 1999. (au)

  5. Preserving information in neural transmission.

    Science.gov (United States)

    Sincich, Lawrence C; Horton, Jonathan C; Sharpee, Tatyana O

    2009-05-13

    Along most neural pathways, the spike trains transmitted from one neuron to the next are altered. In the process, neurons can either achieve a more efficient stimulus representation, or extract some biologically important stimulus parameter, or succeed at both. We recorded the inputs from single retinal ganglion cells and the outputs from connected lateral geniculate neurons in the macaque to examine how visual signals are relayed from retina to cortex. We found that geniculate neurons re-encoded multiple temporal stimulus features to yield output spikes that carried more information about stimuli than was available in each input spike. The coding transformation of some relay neurons occurred with no decrement in information rate, despite output spike rates that averaged half the input spike rates. This preservation of transmitted information was achieved by the short-term summation of inputs that geniculate neurons require to spike. A reduced model of the retinal and geniculate visual responses, based on two stimulus features and their associated nonlinearities, could account for >85% of the total information available in the spike trains and the preserved information transmission. These results apply to neurons operating on a single time-varying input, suggesting that synaptic temporal integration can alter the temporal receptive field properties to create a more efficient representation of visual signals in the thalamus than the retina.

  6. Towards Interoperable Preservation Repositories: TIPR

    Directory of Open Access Journals (Sweden)

    Priscilla Caplan

    2010-07-01

    Full Text Available Towards Interoperable Preservation Repositories (TIPR is a project funded by the Institute of Museum and Library Services to create and test a Repository eXchange Package (RXP. The package will make it possible to transfer complex digital objects between dissimilar preservation repositories.  For reasons of redundancy, succession planning and software migration, repositories must be able to exchange copies of archival information packages with each other. Every different repository application, however, describes and structures its archival packages differently. Therefore each system produces dissemination packages that are rarely understandable or usable as submission packages by other repositories. The RXP is an answer to that mismatch. Other solutions for transferring packages between repositories focus either on transfers between repositories of the same type, such as DSpace-to-DSpace transfers, or on processes that rely on central translation services.  Rather than build translators between many dissimilar repository types, the TIPR project has defined a standards-based package of metadata files that can act as an intermediary information package, the RXP, a lingua franca all repositories can read and write.

  7. Brief concept of hip preservation

    Directory of Open Access Journals (Sweden)

    Sanjeev S. Madan

    2017-12-01

    Full Text Available Restoration of the anatomy of the hip joint and biomechanics across it, carry the immense importance to prevent future osteoarthritis of the joint. The aim of this review is to provide the brief concept of the methods to preserve the hip, especially in young adults. Attempts to preserve the hips start with the intense preoperative planning of the corrective procedure. Different parameters regarding the femur and acetabulum in all 3 dimensions need to be assessed. Especially, measurement of the anteversion of the femur and acetabulum is a significant step to avoid osteoarthritis. In addition, the suprapelvic and infrapelvic (spine and lower limb lengths alignment needs to be considered in the planning. Correction of the femoral side of the hip needs the understanding of the blood supply of the proximal femur which carries the risk of avascular necrosis more so with intracapsular osteotomies. Acetabular reorientation, to re-distribute the forces over the weight bearing part, can be carried out with re-directional osteotomy such as periacetabular osteotomy. It needs the understanding of the acetabular anatomy and the force distribution in it. To conclude, correction of both femoral and acetabular side parameters need to be considered in decision making depending on the alterations due to various etiologies causing the hip disorders.

  8. Distributed privacy preserving data collection

    KAUST Repository

    Xue, Mingqiang

    2011-01-01

    We study the distributed privacy preserving data collection problem: an untrusted data collector (e.g., a medical research institute) wishes to collect data (e.g., medical records) from a group of respondents (e.g., patients). Each respondent owns a multi-attributed record which contains both non-sensitive (e.g., quasi-identifiers) and sensitive information (e.g., a particular disease), and submits it to the data collector. Assuming T is the table formed by all the respondent data records, we say that the data collection process is privacy preserving if it allows the data collector to obtain a k-anonymized or l-diversified version of T without revealing the original records to the adversary. We propose a distributed data collection protocol that outputs an anonymized table by generalization of quasi-identifier attributes. The protocol employs cryptographic techniques such as homomorphic encryption, private information retrieval and secure multiparty computation to ensure the privacy goal in the process of data collection. Meanwhile, the protocol is designed to leak limited but non-critical information to achieve practicability and efficiency. Experiments show that the utility of the anonymized table derived by our protocol is in par with the utility achieved by traditional anonymization techniques. © 2011 Springer-Verlag.

  9. Osteoblasts extracellular matrix induces vessel like structures through glycosylated collagen I

    International Nuclear Information System (INIS)

    Palmieri, D.; Valli, M.; Viglio, S.; Ferrari, N.; Ledda, B.; Volta, C.; Manduca, P.

    2010-01-01

    Extracellular matrix (ECM) plays a fundamental role in angiogenesis affecting endothelial cells proliferation, migration and differentiation. Vessels-like network formation in vitro is a reliable test to study the inductive effects of ECM on angiogenesis. Here we utilized matrix deposed by osteoblasts as substrate where the molecular and structural complexity of the endogenous ECM is preserved, to test if it induces vessel-like network formation by endothelial cells in vitro. ECM is more similar to the physiological substrate in vivo than other substrates previously utilized for these studies in vitro. Osteogenic ECM, prepared in vitro from mature osteoblasts at the phase of maximal deposition and glycosylation of collagen I, induces EAhy926, HUVEC, and HDMEC endothelial cells to form vessels-like structures and promotes the activation of metalloproteinase-2 (MMP-2); the functionality of the p-38/MAPK signaling pathway is required. Osteogenic ECM also induces a transient increase of CXCL12 and a decrease of the receptor CXCR4. The induction of vessel-like networks is dependent from proper glycosylation of collagens and does not occur on osteogenic ECMs if deglycosylated by -galactosidase or on less glycosylated ECMs derived from preosteoblasts and normal fibroblasts, while is sustained on ECM from osteogenesis imperfecta fibroblasts only when their mutation is associated with over-glycosylation of collagen type I. These data support that post-translational glycosylation has a role in the induction in endothelial cells in vitro of molecules conductive to self-organization in vessels-like structures.

  10. Osteoblasts extracellular matrix induces vessel like structures through glycosylated collagen I

    Energy Technology Data Exchange (ETDEWEB)

    Palmieri, D. [Genetics, DIBIO, University of Genova, Corso Europa 26, 16132 Genova (Italy); Valli, M.; Viglio, S. [Department of Biochemistry, University of Pavia (Italy); Ferrari, N. [Istituto Nazionale per la ricerca sul Cancro, Genova (Italy); Ledda, B.; Volta, C. [Genetics, DIBIO, University of Genova, Corso Europa 26, 16132 Genova (Italy); Manduca, P., E-mail: man-via@unige.it [Genetics, DIBIO, University of Genova, Corso Europa 26, 16132 Genova (Italy)

    2010-03-10

    Extracellular matrix (ECM) plays a fundamental role in angiogenesis affecting endothelial cells proliferation, migration and differentiation. Vessels-like network formation in vitro is a reliable test to study the inductive effects of ECM on angiogenesis. Here we utilized matrix deposed by osteoblasts as substrate where the molecular and structural complexity of the endogenous ECM is preserved, to test if it induces vessel-like network formation by endothelial cells in vitro. ECM is more similar to the physiological substrate in vivo than other substrates previously utilized for these studies in vitro. Osteogenic ECM, prepared in vitro from mature osteoblasts at the phase of maximal deposition and glycosylation of collagen I, induces EAhy926, HUVEC, and HDMEC endothelial cells to form vessels-like structures and promotes the activation of metalloproteinase-2 (MMP-2); the functionality of the p-38/MAPK signaling pathway is required. Osteogenic ECM also induces a transient increase of CXCL12 and a decrease of the receptor CXCR4. The induction of vessel-like networks is dependent from proper glycosylation of collagens and does not occur on osteogenic ECMs if deglycosylated by -galactosidase or on less glycosylated ECMs derived from preosteoblasts and normal fibroblasts, while is sustained on ECM from osteogenesis imperfecta fibroblasts only when their mutation is associated with over-glycosylation of collagen type I. These data support that post-translational glycosylation has a role in the induction in endothelial cells in vitro of molecules conductive to self-organization in vessels-like structures.

  11. Metallurgy of steels for PWR pressure vessels

    International Nuclear Information System (INIS)

    Kepka, M.; Mocek, J.; Barackova, L.

    1980-01-01

    A survey and the chemical compositions are presented of reactor pressure vessel steels. The metallurgy is described of steel making for pressure vessels in Japan and the USSR. Both acidic and alkaline open-hearth steel is used for the manufacture of ingots. The leading world manufacturers of forging ingots for pressure vessels, however, exclusively use electric steel. Vacuum casting techniques are exclusively used. Experience is shown gained with the introduction of the manufacture of forging ingots for pressure vessels at SKODA, Plzen. The metallurgical procedure was tested utilizing alkaline open hearths, electric arc furnaces and facilities for vacuum casting of steel. Pure charge raw materials should be used for securing high steel purity. Prior to forging pressure vessel rings, not only should sufficiently big bottoms and heads be removed but also the ingot middle part should be scrapped showing higher contents of impurities and nonhomogeneous structure. (B.S.)

  12. Metallurgy of steels for PWR pressure vessels

    Energy Technology Data Exchange (ETDEWEB)

    Kepka, M; Mocek, J; Barackova, L [Skoda, Plzen (Czechoslovakia)

    1980-09-01

    A survey and the chemical compositions are presented of reactor pressure vessel steels. The metallurgy is described of steel making for pressure vessels in Japan and the USSR. Both acidic and alkaline open-hearth steel is used for the manufacture of ingots. The leading world manufacturers of forging ingots for pressure vessels, however, exclusively use electric steel. Vacuum casting techniques are exclusively used. Experience is shown gained with the introduction of the manufacture of forging ingots for pressure vessels at SKODA, Plzen. The metallurgical procedure was tested utilizing alkaline open hearths, electric arc furnaces and facilities for vacuum casting of steel. Pure charge raw materials should be used for securing high steel purity. Prior to forging pressure vessel rings, not only should sufficiently big bottoms and heads be removed but also the ingot middle part should be scrapped showing higher contents of impurities and nonhomogeneous structure.

  13. Nuclear reactor vessel fuel thermal insulating barrier

    Science.gov (United States)

    Keegan, C. Patrick; Scobel, James H.; Wright, Richard F.

    2013-03-19

    The reactor vessel of a nuclear reactor installation which is suspended from the cold leg nozzles in a reactor cavity is provided with a lower thermal insulating barrier spaced from the reactor vessel that has a hemispherical lower section that increases in volume from the center line of the reactor to the outer extent of the diameter of the thermal insulating barrier and smoothly transitions up the side walls of the vessel. The space between the thermal insulating harrier and the reactor vessel forms a chamber which can be flooded with cooling water through passive valving to directly cool the reactor vessel in the event of a severe accident. The passive inlet valve for the cooling water includes a buoyant door that is normally maintained sealed under its own weight and floats open when the cavity is Hooded. Passively opening steam vents are also provided.

  14. Method of burying vessel containing radioactive waste

    International Nuclear Information System (INIS)

    Koga, Yoshihito.

    1989-01-01

    A float having an inert gas sealed therein is attached to a tightly closed vessel containing radioactive wastes. The vessel is inserted and kept in a small hole for burying the tightly closed vessel in an excavated shaft in rocks such as of granite or rock salts, while filling bentonite as shielding material therearound. In this case, the float is so adjusted that the apparent specific gravity is made equal or nearer between the tightly closed vessel and the bentonite, so that the rightly closed vessel does not sink and cause direct contact with the rocks even if bentonite flows due to earthquakes, etc. This can prevent radioactivity contamination through water in the rocks. (S.K.)

  15. An experimental study on feasibility of ex-vessel cooling through the external guide vessel

    International Nuclear Information System (INIS)

    Kang, Kyoung-Ho; Kim, Jong-Hwan; Park, Rae-Jun; Kim, Sang-Baik

    2000-01-01

    This paper presents the results of a series of experiments for assessing the efficacy of ex-vessel cooling through the external guide vessel during a severe accident. Four tests were performed in the LAVA test facility at KAERI, varying the boundary conditions at the outer surface of the vessel. The first test was a dry condition test conducted without cooling the outside of the vessel. On the other hand, in the second test, the cooling of the vessel surface was produced by gravity-driven forced injection of water along the annular gap of 25 mm between the vessel and the external guide vessel. Water flow rate was about 0.85 kg/s and total mass of available water was 300 kg. For the evaluation of the water flow rate effect, the third test was performed with a pool type cooling in the annulus without any circulation of water. These two external cooling tests were performed under elevated pressure of about 1.6 MPa. Finally, the fourth test was conducted under atmospheric pressure to evaluate the effect of system pressure on boiling heat transfer characteristics. In the dry test and the pool type ex-vessel cooling test performed under atmospheric pressure, the vessel was failed by a melt penetration at about 40 degree upper position from the vessel bottom, which is coincident with the boundary of the Al 2 O 3 /Fe melt separated layers. On the other hand, in both of the ex-vessel cooling tests conducted under elevated pressure of about 1.6 MPa, the vessel didn't fail. Compared with the pool boiling test, the vessel experienced effective cooling due to the inlet flow in the forced flow test. Synthesized the results of the tests, it was shown that the heat removal with ex-vessel cooling through the guide vessel is feasible, but the additional evaluations should be performed to guarantee enough thermal margin. (author)

  16. Is my network module preserved and reproducible?

    Directory of Open Access Journals (Sweden)

    Peter Langfelder

    2011-01-01

    Full Text Available In many applications, one is interested in determining which of the properties of a network module change across conditions. For example, to validate the existence of a module, it is desirable to show that it is reproducible (or preserved in an independent test network. Here we study several types of network preservation statistics that do not require a module assignment in the test network. We distinguish network preservation statistics by the type of the underlying network. Some preservation statistics are defined for a general network (defined by an adjacency matrix while others are only defined for a correlation network (constructed on the basis of pairwise correlations between numeric variables. Our applications show that the correlation structure facilitates the definition of particularly powerful module preservation statistics. We illustrate that evaluating module preservation is in general different from evaluating cluster preservation. We find that it is advantageous to aggregate multiple preservation statistics into summary preservation statistics. We illustrate the use of these methods in six gene co-expression network applications including 1 preservation of cholesterol biosynthesis pathway in mouse tissues, 2 comparison of human and chimpanzee brain networks, 3 preservation of selected KEGG pathways between human and chimpanzee brain networks, 4 sex differences in human cortical networks, 5 sex differences in mouse liver networks. While we find no evidence for sex specific modules in human cortical networks, we find that several human cortical modules are less preserved in chimpanzees. In particular, apoptosis genes are differentially co-expressed between humans and chimpanzees. Our simulation studies and applications show that module preservation statistics are useful for studying differences between the modular structure of networks. Data, R software and accompanying tutorials can be downloaded from the following webpage: http

  17. What to do now? How women with breast cancer make fertility preservation decisions.

    Science.gov (United States)

    Snyder, Karrie Ann; Tate, Alexandra Lee

    2013-07-01

    There has been increased attention paid to cancer-related infertility and fertility preservation. However, how cancer patients decide whether or not to pursue fertility preservation has not been fully examined. The data come from 34 interviews with women in the USA diagnosed with breast cancer prior to 40 years of age who contemplated fertility preservation prior to cancer treatment. Fully transcribed interviews were coded through a three-staged inductive process. Three sets of factors that shaped the decision-making process of the respondents regarding fertility preservation treatment options were identified: perceived benefits (e.g. ability to use 'younger' eggs in the future), inhibiting concerns (e.g. success rates) and influential relationships (e.g. physicians, parents and partners). Respondents saw their main fertility preservation decision as choosing whether or not to pursue egg/embryo banking. The decision-making process was complicated and included both health-related and personal considerations, with many respondents reporting a lack of support services for fertility issues. Findings suggest that greater attention needs to be placed on presenting patients with a wider range of options. Those who counsel patients regarding fertility preservation decisions should be aware of the influence of relationship dynamics, broader health care concerns, and fertility histories on these decisions. KEY MESSAGE POINTS: While fertility preservation has garnered greater attention, less is known about how cancer patients make fertility preservation decisions. Despite the range of choices for fertility preservation, respondents identified egg/embryo banking as their primary option. Many factors outside of cancer concerns inhibit and facilitate fertility preservation decisions including fertility history and family relationship dynamics.

  18. Radiation embrittlement of PWR vessel supports

    International Nuclear Information System (INIS)

    Cheverton, R.D.; Robinson, G.C.; Pennell, W.E.; Nanstad, R.K.

    1989-01-01

    Several studies pertaining to radiation damage of PWR vessel supports were conducted between 1978 and 1987. During this period, apparently there was no reason to believe that low-temperature (<100 degree C) MTR embrittlement data were not appropriate for evaluating embrittlement of PWR vessel supports. However, late in 1986, data from the High Flux Isotope Reactor (HFIR) vessel surveillance program indicated that the embrittlement rates of the several HFIR vessel materials (A212-B, A350-LF3, A105-II) were substantially greater than anticipated on the basis of MTR data. Further evaluation of the HFIR data suggested that a fluence-rate effect was responsible for the apparent discrepancy, and shortly thereafter it became apparent that this rate effect was applicable to the evaluation of LWR vessel supports. As a result, the Nuclear Regulatory Commission (NRC) requested that the Oak Ridge National Laboratory (ORNL) evaluate the impact of the apparent embrittlement rate effect on the integrity of light-water-reactor (LWR) vessel supports. The purpose of the study was to provide an indication of whether the integrity of reactor vessel supports is likely to be challenged by radiation-induced embrittlement. The scope of the evaluation included correlation of the HFIR data for application to the evaluation of LWR vessel supports; a survey and cursory evaluation of all US LWR vessel support designs, selection of two plants for specific-plant evaluation, and a specific-plant evaluation of both plants to determine critical flaw sizes for their vessel supports. 19 refs., 8 figs., 2 tabs

  19. Parental Influences on Adolescent Adjustment: Parenting Styles Versus Parenting Practices

    Science.gov (United States)

    Lee, Sang Min; Daniels, M. Harry; Kissinger, Daniel B.

    2006-01-01

    The study identified distinct patterns of parental practices that differentially influence adolescent behavior using the National Educational Longitudinal Survey (NELS:88) database. Following Brenner and Fox's research model (1999), the cluster analysis was used to classify the four types of parental practices. The clusters of parenting practices…

  20. Proactive Parent Communication.

    Science.gov (United States)

    Babcock, Sharel; Backlund, Judy

    2001-01-01

    Presents examples of teacher-parent interactions designed to help teachers communicate with parents. The scenarios involve a teacher communicating with parents about a struggling student, a teacher communicating with parents about a student's behavior problems, and a teacher attempting to communicate with a confrontational parent. Teacher prompts…

  1. New algorithm for detecting smaller retinal blood vessels in fundus images

    Science.gov (United States)

    LeAnder, Robert; Bidari, Praveen I.; Mohammed, Tauseef A.; Das, Moumita; Umbaugh, Scott E.

    2010-03-01

    About 4.1 million Americans suffer from diabetic retinopathy. To help automatically diagnose various stages of the disease, a new blood-vessel-segmentation algorithm based on spatial high-pass filtering was developed to automatically segment blood vessels, including the smaller ones, with low noise. Methods: Image database: Forty, 584 x 565-pixel images were collected from the DRIVE image database. Preprocessing: Green-band extraction was used to obtain better contrast, which facilitated better visualization of retinal blood vessels. A spatial highpass filter of mask-size 11 was applied. A histogram stretch was performed to enhance contrast. A median filter was applied to mitigate noise. At this point, the gray-scale image was converted to a binary image using a binary thresholding operation. Then, a NOT operation was performed by gray-level value inversion between 0 and 255. Postprocessing: The resulting image was AND-ed with its corresponding ring mask to remove the outer-ring (lens-edge) artifact. At this point, the above algorithm steps had extracted most of the major and minor vessels, with some intersections and bifurcations missing. Vessel segments were reintegrated using the Hough transform. Results: After applying the Hough transform, both the average peak SNR and the RMS error improved by 10%. Pratt's Figure of Merit (PFM) was decreased by 6%. Those averages were better than [1] by 10-30%. Conclusions: The new algorithm successfully preserved the details of smaller blood vessels and should prove successful as a segmentation step for automatically identifying diseases that affect retinal blood vessels.

  2. ITER vacuum vessel, in vessel components and plasma facing materials

    International Nuclear Information System (INIS)

    Ioki, Kimihiro; Enoeda, M.; Federici, G.

    2007-01-01

    Design of the NB ports including duct liners under heat loads of the neutral beams has been developed. Design of the in-wall shielding has been developed in more details considering the supporting structure and the assembly method. The ferromagnetic inserts have previously not been installed in the outboard midplane region due to irregularity caused by the tangential ports for NB injection. Due to this configuration, the maximum ripple is relatively large (∝1 %) in a limited region of the plasma and the toroidal field flux lines fluctuate ∝10 mm in the FW region. To avoid these problems, additional ferromagnetic inserts are to be installed in the equatorial port region. Detailed studies were carried out on the ITER vacuum vessel to define appropriate codes and standards in the context of the ITER licensing in France. A set of draft documents regarding the ITER vacuum vessel structural code were prepared including an RCC-MR Addendum for the ITER VV with justified exceptions or modifications. The main deviation from the base Code is the extensive use of UT in lieu of radiography for the volumetric examination of all one-side access welds of the outer shell and field joint. The procurement allocation of blanket modules among 6 parties was fixed and the blanket module design has progressed in cooperation with parties. Fabrication of mock-ups for prequalification testing is under way and the tests will be performed in 2007-2008. Development of new beryllium materials is progressing in China and Russia. The ITER limiters will be installed in equatorial ports at two toroidal locations. The limiter plasma-facing surface protrudes ∝8 cm from the FW during the start-up and shutdown phase. In the new limiter concept, the limiters are retracted by ∝8 cm during the plasma flat top phase. This concept gives important advantages; (i) mitigation of the particle and heat loads due to disruptions, ELMs and blobs, (ii) improvement of the power coupling with the ICRH antenna

  3. Reactor pressure vessel. Status report

    International Nuclear Information System (INIS)

    Elliot, B.J.; Hackett, E.M.; Lee, A.D.

    1996-10-01

    This report describes the issues raised as a result of the staffs review of Generic Letter (GL) 92-01, Revision 1, responses and plant-specific reactor pressure vessel (RPV) assessments and the actions taken or work in progress to address these issues. In addition, the report describes actions taken by the staff and the nuclear industry to develop a thermal annealing process for use at U.S. commercial nuclear power plants. This process is intended to be used as a means of mitigating the effects of neutron radiation on the fracture toughness of RPV materials. The Nuclear Regulatory Commission (NRC) issued GL 92-01, Revision 1, Supplement 1, to obtain information needed to assess compliance with regulatory requirements and licensee commitments regarding RPV integrity. GL 92-01, Revision 1, Supplement 1, was issued as a result of generic issues that were raised in the NRC staff's reviews of licensee responses to GL 92-01, Revision 1, and plant-specific RPV evaluations. In particular, an integrated review of all data submitted in response to GL 92-01, Revision 1, indicated that licensees may not have considered all relevant data in their RPV assessments. This report is representative of submittals to and evaluations by the staff as of September 30, 1996. An update of this report will be issued at a later date

  4. Correlation-Preserving Photo Collage.

    Science.gov (United States)

    Liu, Lingjie; Zhang, Hongjie; Jing, Guangmei; Guo, Yanwen; Chen, Zhonggui; Wang, Wenping

    2017-05-12

    A new method is presented for producing photo collages that preserve content correlation of photos. We use deep learning techniques to find correlation among given photos to facilitate their embedding on the canvas, and develop an efficient combinatorial optimization technique to make correlated photos stay close to each other. To make efficient use of canvas space, our method first extracts salient regions of photos and packs only these salient regions. We allow the salient regions to have arbitrary shapes, therefore yielding informative, yet more compact collages than by other similar collage methods based on salient regions. We present extensive experimental results, user study results, and comparisons against the state-of-the-art methods to show the superiority of our method.

  5. Privacy-Preserving Trajectory Collection

    DEFF Research Database (Denmark)

    Gidofalvi, Gyozo; Xuegang, Huang; Pedersen, Torben Bach

    2008-01-01

    In order to provide context--aware Location--Based Services, real location data of mobile users must be collected and analyzed by spatio--temporal data mining methods. However, the data mining methods need precise location data, while the mobile users want to protect their location privacy....... To remedy this situation, this paper first formally defines novel location privacy requirements. Then, it briefly presents a system for privacy--preserving trajectory collection that meets these requirements. The system is composed of an untrusted server and clients communicating in a P2P network. Location...... data is anonymized in the system using data cloaking and data swapping techniques. Finally, the paper empirically demonstrates that the proposed system is effective and feasible....

  6. Radiations to preserve world heritage

    International Nuclear Information System (INIS)

    Hurel, T.

    2017-01-01

    This article details the use of radiation to preserve the archaeological and artistic heritage. Gamma radiations are used to kill living organisms (insects, fungi and moulds) and to solidify styren-polyester resins that may be injected in wood items to reinforce them. Neutron irradiations are used to reveal the structure of an item and to get information on the materials the item is made of. Both irradiations are non-destructive. Carbon 14 dating is efficient to age items but beyond 50.000 years the method becomes ineffective and other methods like thermoluminescence take over. For instance it is the thermoluminescence method applied on flints found on the Jebel Irhoud site (Morocco) that has allowed to push back the age of the first Homo Sapiens by 100.000 years to reach 300.000 years. (A.C.)

  7. [Chemotherapy and women fertility preservation].

    Science.gov (United States)

    Gauthier, Tristan; Piver, Pascal; Durand, Lise-Marie; Donadel, Lorène; Pech, Jean-Christophe; Roux, Christophe; Aubard, Yves

    2010-01-01

    Agressive chemotherapy can lead to premature ovarian failure and loss of fertility in women and children. Embryo cryopreservation is an established clinical procedure of fertility preservation but with several limitations. Others options are available. Cryopreservation ovarian cortex tissu have to be suggested in case of high gonadotoxic treatment. It doesn't require puberty and delay in initiation of chemotherapy. The first birth in France after orthotopic graft of ovarian tissu thawed have been recently described with a promising process. Oocyte cryopreservation is available for women without partner but the experience is limited. Gonadotrophin-releasing hormone (GnRH) agonist therapy as ovarian protectants seem interesting. Follicular growth and maturation in vitro are still experimental. Copyright 2010 Elsevier Masson SAS. All rights reserved.

  8. Saliva Preservative for Diagnostic Purposes

    Science.gov (United States)

    Pierson, Duane L.; Mehta, Satish K.

    2012-01-01

    Saliva is an important body fluid for diagnostic purposes. Glycoproteins, glucose, steroids, DNA, and other molecules of diagnostic value are found in saliva. It is easier to collect as compared to blood or urine. Unfortunately, saliva also contains large numbers of bacteria that can release enzymes, which can degrade proteins and nucleic acids. These degradative enzymes destroy or reduce saliva s diagnostic value. This innovation describes the formulation of a chemical preservative that prevents microbial growth and inactivates the degradative enzymes. This extends the time that saliva can be stored or transported without losing its diagnostic value. Multiple samples of saliva can be collected if needed without causing discomfort to the subject and it does not require any special facilities to handle after it is collected.

  9. Preserving experience through expert systems

    International Nuclear Information System (INIS)

    Jelinek, J.B.; Weidman, S.H.

    1989-01-01

    Expert systems technology, one of the branches in the field of computerized artificial intelligence, has existed for >30 yr but only recently has been made available on commercially standard hardware and software platforms. An expert system can be defined as any method of encoding knowledge by representing that knowledge as a collection of facts or objects. Decisions are made by the expert program by obtaining data about the problem or situation and correlating encoded facts (knowledge) to the data until a conclusion can be reached. Such conclusions can be relayed to the end user as expert advice. Realizing the potential of this technology, General Electric (GE) Nuclear Energy (GENE) has initiated a development program in expert systems applications; this technology offers the potential for packaging, distributing, and preserving nuclear experience in a software form. The paper discusses application fields, effective applications, and knowledge acquisition and knowledge verification

  10. Privacy-preserving distributed clustering

    DEFF Research Database (Denmark)

    Erkin, Zekeriya; Veugen, Thijs; Toft, Tomas

    2013-01-01

    with any other entity, including the service provider. Such privacy concerns lead to trust issues between entities, which clearly damages the functioning of the service and even blocks cooperation between entities with similar data sets. To enable joint efforts with private data, we propose a protocol......, or in some cases, information from different databases is pooled to enrich the data so that the merged database can improve the clustering effort. However, in either case, the content of the database may be privacy sensitive and/or commercially valuable such that the owners may not want to share their data...... provider with computations. Experimental results clearly indicate that the work we present is an efficient way of deploying a privacy-preserving clustering algorithm in a distributed manner....

  11. 78 FR 40891 - Revisions to the Export Administration Regulations: Military Vehicles; Vessels of War...

    Science.gov (United States)

    2013-07-08

    ... Vehicles; Vessels of War; Submersible Vessels, Oceanographic Equipment; Related Items; and Auxiliary and... Regulations: Military Vehicles; Vessels of War; Submersible Vessels, Oceanographic Equipment; Related Items... military vehicles and related items; vessels of war and related items; submersible vessels, oceanographic...

  12. SMART PACKAGING FOR FOOD PRESERVATION

    Directory of Open Access Journals (Sweden)

    Raquel Rodríguez-Sauceda

    2014-07-01

    Full Text Available One of the biggest challenges of the food industry is the preservation of its products, that is, to prevent them from being attacked by microorganisms that decompose them hauling economic losses and severe health damage to the consumer. Today, competition in the food industry is very high and any company that does not offer the quality products is doomed to fail. Consumers demand more and the industry still stands offering what is asked: quality, security and safety. The package, in addition to fulfilling its core functions is becoming a means of sophisticated interactions with content and a record of relevant information for both the end consumer and intermediate players in the value chain and concepts are born of active and intelligent packaging. A smart container is defined as a system that monitors the condition of the packaged product, being able to register and provide information about product quality or condition of the container, showing the possible "abnormal" practices that have suffered the product or the container during the entire supply chain, such as transportation or storage. These systems monitor the mechanisms of altered food due to physiological, chemical and biological processes that respond and communicate changes in the status of the product as time-temperature, Oxygen, Carbon dioxide, microbial growth, etc. There are different types of smart packaging such as time-temperature indicators, color indicators, indicators of pathogens and indicators of leaks, to name a few. Through literature review, arguments that demonstrate the usefulness and necessity of the use of smart packaging to preserve the quality and safety of the product it contains, from manufacturing to the time it is used by consumers were found, as these besides communicating or providing information about their state, acting as a marketing tool.

  13. Design of the ITER vacuum vessel

    International Nuclear Information System (INIS)

    Ioki, K.; Johnson, G.; Shimizu, K.; Williamson, D.

    1995-01-01

    The ITER vacuum vessel is a major safety barrier and must support electromagnetic loads during plasma disruptions and vertical displacement events (VDE) and withstand plausible accidents without losing confinement.The vacuum vessel has a double wall structure to provide structural and electrical continuity in the toroidal direction. The inner and outer shells and poloidal stiffening ribs between them are joined by welding, which gives the vessel the required mechanical strength. The space between the shells will be filled with steel balls and plate inserts to provide additional nuclear shielding. Water flowing in this space is required to remove nuclear heat deposition, which is 0.2-2.5% of the total fusion power. The minor and major radii of the tokamak are 3.9 m and 13 m respectively, and the overall height is 15 m. The total thickness of the vessel wall structure is 0.4-0.7 m.The inboard and outboard blanket segments are supported from the vacuum vessel. The support structure is required to withstand a large total vertical force of 200-300 MN due to VDE and to allow for differential thermal expansion.The first candidate for the vacuum vessel material is Inconel 625, due to its higher electric resistivity and higher yield strength, even at high temperatures. Type 316 stainless steel is also considered a vacuum vessel material candidate, owing to its large database and because it is supported by more conventional fabrication technology. (orig.)

  14. Assessment of reactor vessel integrity (ARVI)

    Energy Technology Data Exchange (ETDEWEB)

    Sehgal, B.R. E-mail: sehgal@ne.kth.se; Theerthan, A.; Giri, A.; Karbojian, A.; Willschuetz, H.G.; Kymaelaeinen, O.; Vandroux, S.; Bonnet, J.M.; Seiler, J.M.; Ikkonen, K.; Sairanen, R.; Bhandari, S.; Buerger, M.; Buck, M.; Widmann, W.; Dienstbier, J.; Techy, Z.; Kostka, P.; Taubner, R.; Theofanous, T.; Dinh, T.N

    2003-04-01

    The cost-shared project ARVI (assessment of reactor vessel integrity) involves a total of nine organisations from Europe and USA. The objective of the ARVI Project is to resolve the safety issues that remain unresolved for the melt vessel interaction phase of the in-vessel progression of a severe accident. The work consists of experiments and analysis development. Four tests were performed in the EC-FOREVER Programme, in which failure was achieved in-vessels employing the French pressure vessel steel. The tests were analysed with the commercial code ANSYS-Multiphysics, and the codes SYSTUS+ and PASULA, and quite good agreement was achieved for the failure location. Natural convection experiments in stratified pools have been performed in the SIMECO and the COPO facilities, which showed that much greater heat is transferred downwards for immiscible layers or before layers mix. A model for gap cooling and a set of simplified models for the system codes have been developed. MVITA code calculations have been performed for the Czech and Hungarian VVERs, towards evaluation of the in-vessel melt retention accident management scheme. Tests have been performed at the ULPU facility with organised flow for vessel external cooling. Considerable enhancement of the critical heat flux (CHF) was obtained. The ARVI Project has reached the halfway stage. This paper presents the results obtained thus far from the project.

  15. Flexible Composite-Material Pressure Vessel

    Science.gov (United States)

    Brown, Glen; Haggard, Roy; Harris, Paul A.

    2003-01-01

    A proposed lightweight pressure vessel would be made of a composite of high-tenacity continuous fibers and a flexible matrix material. The flexibility of this pressure vessel would render it (1) compactly stowable for transport and (2) more able to withstand impacts, relative to lightweight pressure vessels made of rigid composite materials. The vessel would be designed as a structural shell wherein the fibers would be predominantly bias-oriented, the orientations being optimized to make the fibers bear the tensile loads in the structure. Such efficient use of tension-bearing fibers would minimize or eliminate the need for stitching and fill (weft) fibers for strength. The vessel could be fabricated by techniques adapted from filament winding of prior composite-material vessels, perhaps in conjunction with the use of dry film adhesives. In addition to the high-bias main-body substructure described above, the vessel would include a low-bias end substructure to complete coverage and react peak loads. Axial elements would be overlaid to contain damage and to control fiber orientation around side openings. Fiber ring structures would be used as interfaces for connection to ancillary hardware.

  16. Temporal trends of preservative allergy in Denmark (1985-2008)

    DEFF Research Database (Denmark)

    Thyssen, Jacob P; Engkilde, Kåre; Lundov, Michael D

    2010-01-01

    Most cosmetics and industrial products contain preservatives. Preservative allergy is common and, historically, changing contact allergy epidemics caused by preservatives have been observed. In 1997, Alan Dillarstone predicted a stable development of preservative allergy following mandatory...

  17. Parenting while Being Homeless

    Science.gov (United States)

    Swick, Kevin J.; Williams, Reginald; Fields, Evelyn

    2014-01-01

    This article explores the dynamics of parenting while being in a homeless context. The mosaic of stressors involved in this homeless parenting process are explicated and discussed. In addition, resources and strategies that may support parenting are presented and discussed.

  18. Nursemaid's Elbow (For Parents)

    Science.gov (United States)

    ... Parents Parents site Sitio para padres General Health Growth & Development Infections Diseases & Conditions Pregnancy & Baby Nutrition & Fitness Emotions & ... For Parents / Nursemaid's Elbow Print About Nursemaid's Elbow Toddlers and preschoolers are at risk for a common ...

  19. Offshore wind transport and installation vessel

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2001-07-01

    The initial objective of the project was to complete a feasibility study to determine the viability of an innovative transportation vessel to be deployed in the installation of offshore wind farms. This included the feasibility of providing a stable-working platform that can be used in harsh offshore environments. A study of current installation contractors and their installation equipment was used to provide a preliminary specification for the installation vessel. A typical barge was selected and a number of hydrodynamic analyses were carried out in order to establish it's on course and operational stability. The analysis proved the stability of the vessel during operation was critical and that in order to utilise the crane's full potential a stabilisation system must be employed. The main aim of the work to date was to establish whether it was feasible to use a stabilisation system on the installation vessel. The spud leg FEED study established that it was feasible to use spud legs to stabilise the vessel. In order to achieve the degree of stability required it is necessary to lift the vessel completely out of the water. This was not the original aim of the study but due to the external loads on the hull it was the only viable option. Lifting the vessel out of the water results in the legs and leg casings becoming very large. This has a number of consequences for the final design. Due to large loads on the legs spud cans must be used to avoid bottom penetration, the spud cans increase the draft of the vessel by 2m. The large loads require larger winches and more reeving to be used, this results in larger pumps and motors, all of which have to be housed. The stabilisation system has been proved to be feasible for a large installation vessel, the cost and physical size are however more excessive than first anticipated. (Author)

  20. Parental overprotection revisited.

    Science.gov (United States)

    Thomasgard, M; Metz, W P

    1993-01-01

    Dimensions of parental overprotection are clarified in a critical review of the research and clinical literature. An indulgent style of parenting is distinguished from an overprotective parent-child relationship. Differential antecedents and outcomes are proposed for each of these forms of parent-child interaction. Measures of protection are reviewed. A new conceptual model of parental overprotection is presented which takes into account child, parent, family, socio-cultural, environmental and resiliency factors. Directions for future research are suggested.

  1. Reactor vessel using metal oxide ceramic membranes

    Science.gov (United States)

    Anderson, Marc A.; Zeltner, Walter A.

    1992-08-11

    A reaction vessel for use in photoelectrochemical reactions includes as its reactive surface a metal oxide porous ceramic membrane of a catalytic metal such as titanium. The reaction vessel includes a light source and a counter electrode. A provision for applying an electrical bias between the membrane and the counter electrode permits the Fermi levels of potential reaction to be favored so that certain reactions may be favored in the vessel. The electrical biasing is also useful for the cleaning of the catalytic membrane.

  2. A study of reactor vessel integrity assessment

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jae Hoon [Korea Institute of Nuclear Safety, Taejon (Korea, Republic of); Kim, Jong Kyung; Shin, Chang Ho; Seo, Bo Kyun [Hanyang Univ., Seoul (Korea, Republic of)

    1999-02-15

    The fast neutron fluence at the Reactor Pressure Vessel(RPV) of KNGR designed for 60 years lifetime was calculated by full-scope Monte Carlo simulation for reactor vessel integrity assessment. KNGR core geometry was modeled on a three-dimensional representation of the one-sixteenth of the reactor in-vessel component. Each fuel assemblies were modeled explicitly, and each fuel pins were axially divided into 5 segments. The maximum flux of 4.3 x 10{sup 10} neutrons/cm{sup 2}. sec at the RPV was obtained by tallying neutrons crossing the beltline of inner surface of the RPV.

  3. Structural Analysis of the NCSX Vacuum Vessel

    International Nuclear Information System (INIS)

    Fred Dahlgren; Art Brooks; Paul Goranson; Mike Cole; Peter Titus

    2004-01-01

    The NCSX (National Compact Stellarator Experiment) vacuum vessel has a rather unique shape being very closely coupled topologically to the three-fold stellarator symmetry of the plasma it contains. This shape does not permit the use of the common forms of pressure vessel analysis and necessitates the reliance on finite element analysis. The current paper describes the NCSX vacuum vessel stress analysis including external pressure, thermal, and electro-magnetic loading from internal plasma disruptions and bakeout temperatures of up to 400 degrees centigrade. Buckling and dynamic loading conditions are also considered

  4. Vessel Sewage Discharges: Statutes, Regulations, and Related Laws and Treaties

    Science.gov (United States)

    Vessel sewage discharges can be regulated under multiple statutes, regulations, and laws/treaties, including the Clean Water Act, Title XIV, MARPOL Annex IV and the Vessel General Permit. This page describes how these are applied to vessel sewage.

  5. Towards Building a Blog Preservation Platform

    CERN Document Server

    Kasioumis, Nikos; Kalb, Hendrik

    2014-01-01

    Social media content and user participation has increased dramatically since the advent of Web 2.0. Blogs have become relevant to every aspect of business and personal life. Nevertheless, we do not have the right tools to aggregate and preserve blog content correctly, as well as to manage blog archives effectively. Given the rising importance of blogs, it is crucial to build systems to facilitate blog preservation, safeguarding an essential part of our heritage that will prove valuable for current and future generations. In this paper, we present our work in progress towards building a novel blog preservation platform featuring robust digital preservation, management and dissemination facilities for blogs. This work is part of the BlogForever project which is aiming to make an impact to the theory and practice of blog preservation by creating guidelines and software that any individual or organization could use to preserve their blogs.

  6. Preservation Copying Endangered Historic Negative Collections

    DEFF Research Database (Denmark)

    Kejser, Ulla Bøgvad

    2008-01-01

    This article discusses preservation copying of unstable B&W nitrate and acetate still photographic negatives. It focuses on evaluating two different strategies for preserving the copies from a point of view of quality and cost-effectiveness. The evaluated strategies are preservation of the master...... by describing essential characteristics of negatives, which must be passed on to the copies, and the required metadata and technical imaging specifications. Next the paper discusses strategies for preservation and makes an analysis with the LIFE2 Costing Model. The paper concludes that the most beneficial...... and cost-effective preservation solution for large format negatives is to keep the preservation copies as digital files. However, it also acknowledges that it is important to revisit such strategies regularly to monitor changes in user expectations, technologies and costs....

  7. Conceptual Paper: Digital Preservation Strategies in Archival Institution

    OpenAIRE

    Ismail Adila; Bullah Affandy Habee

    2018-01-01

    In this paper, the overall overview of concept of preservation regardless if it is preservation of physical records/archives or digital records/archives is discussed. The concept of the preservation discussed includes preventive preservation, restorative preservation, and content preservation. Then the concept of digital preservation. Furthermore, this paper highlighted the strategies and methods used in implementing the preservation of digital records/archives. The issues those are involved ...

  8. Evaluation for In-Vessel Retention Capabilities with In-Vessel Injection and External Reactor Vessel Cooling

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jeong Seong; Ryu, In Chul; Moon, Young Tae [KEPCO Engineering and Construction Co. Ltd., Deajeon (Korea, Republic of)

    2016-10-15

    If the accident has not progressed to the point of substantial changes in the core geometry, establishing adequate cooling is as straightforward as re-establishing flow through the reactor core. However, if the accident has progressed to the point where the core geometry is substantially altered as a result of material melting and relocation, as was the case in the TMI-2 accident, the means of cooling the debris are not as straightforward. From this time on, the reactor core was either completely or nearly covered by water, with high pressure injection flow initiated shortly after three hours into the accident. However, the core debris was not coolable in this configuration and a substantial quantity of molten core material drained into the bypass region, with approximately twenty metric tons of molten debris draining into the reactor pressure vessel (RPV) lower head. Hence, the core configuration developed at approximately three hours into the accident was not coolable, even submerged in water. The purpose of this paper is to evaluate in-vessel retention capabilities with in-vessel injection (IVI) and external reactor vessel cooling (ERVC) available in a reactor application by using the integrated severe accident analysis code. The MAAP5 models were improved to facilitate evaluation of the in-vessel retention capability of APR1400. In-vessel retention capabilities have been analyzed for the APR1400 using the MAAP5.03 code. The results show that in-vessel retention is feasible when in-vessel injection is initiated within a relatively short time frame under the simulation condition used in the present study.

  9. Evaluation for In-Vessel Retention Capabilities with In-Vessel Injection and External Reactor Vessel Cooling

    International Nuclear Information System (INIS)

    Lee, Jeong Seong; Ryu, In Chul; Moon, Young Tae

    2016-01-01

    If the accident has not progressed to the point of substantial changes in the core geometry, establishing adequate cooling is as straightforward as re-establishing flow through the reactor core. However, if the accident has progressed to the point where the core geometry is substantially altered as a result of material melting and relocation, as was the case in the TMI-2 accident, the means of cooling the debris are not as straightforward. From this time on, the reactor core was either completely or nearly covered by water, with high pressure injection flow initiated shortly after three hours into the accident. However, the core debris was not coolable in this configuration and a substantial quantity of molten core material drained into the bypass region, with approximately twenty metric tons of molten debris draining into the reactor pressure vessel (RPV) lower head. Hence, the core configuration developed at approximately three hours into the accident was not coolable, even submerged in water. The purpose of this paper is to evaluate in-vessel retention capabilities with in-vessel injection (IVI) and external reactor vessel cooling (ERVC) available in a reactor application by using the integrated severe accident analysis code. The MAAP5 models were improved to facilitate evaluation of the in-vessel retention capability of APR1400. In-vessel retention capabilities have been analyzed for the APR1400 using the MAAP5.03 code. The results show that in-vessel retention is feasible when in-vessel injection is initiated within a relatively short time frame under the simulation condition used in the present study

  10. Privacy Preservation in Distributed Subgradient Optimization Algorithms

    OpenAIRE

    Lou, Youcheng; Yu, Lean; Wang, Shouyang

    2015-01-01

    Privacy preservation is becoming an increasingly important issue in data mining and machine learning. In this paper, we consider the privacy preserving features of distributed subgradient optimization algorithms. We first show that a well-known distributed subgradient synchronous optimization algorithm, in which all agents make their optimization updates simultaneously at all times, is not privacy preserving in the sense that the malicious agent can learn other agents' subgradients asymptotic...

  11. Knowledge preservation strategies for nuclear power plants

    International Nuclear Information System (INIS)

    Koruna, S.; Bachmann, H.

    2004-01-01

    The nuclear industry is currently facing several challenges. An internal threat to the safety and operations of nuclear power plants is the loss of those employees who hold knowledge that is either critical to operations or safety. This report discusses the possibilities to preserve knowledge in nuclear power plants. Dependent on the degree of tacitness two different knowledge preservation strategies can be discerned: personalization and codification. The knowledge preservation activities discussed are valued according to the criteria: cost, immediacy of availability and completeness

  12. Simulation of In-Vessel Corium Retention through External Reactor Vessel Cooling for SMART using SIMPLE

    Energy Technology Data Exchange (ETDEWEB)

    Jang, Jin-Sung; Son, Donggun; Park, Rae-Joon [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2016-10-15

    Thermal load analysis from the corium pool to the outer reactor vessel in the lower plenum of the reactor vessel is necessary to evaluate the effect of the IVR-ERVC during a severe accident for SMART. A computational code called SIMPLE (Sever Invessel Melt Progression in Lower plenum Environment) has been developed for analyze transient behavior of molten corium in the lower plenum, interaction between corium and coolant, and heat-up and ablation of reactor vessel wall. In this study, heat load analysis of the reactor vessel for SMART has been conducted using the SIMPLE. Transient behavior of the molten corium in the lower plenum and IVR-ERVC for SMART has been simulated using SIMPLE. Heat flux from the corium pool to the outer reactor vessel is concentrated in metallic layer by the focusing effect. As a result, metallic layer shows higher temperature than the oxidic layer. Also, vessel wall of metallic layer has been ablated by the high in-vessel temperature. Ex-vessel temperature of the metallic layer was maintained 390 K and vessel thickness was maintained 14 cm. It means that the reactor vessel integrity is maintained by the IVR-ERVC.

  13. Amblyopia (For Parents)

    Science.gov (United States)

    [Skip to Content] for Parents Parents site Sitio para padres General Health Growth & Development Infections Diseases & Conditions Pregnancy & Baby Nutrition & Fitness Emotions & Behavior School & Family ...

  14. When Parents Argue

    Science.gov (United States)

    [Skip to Content] for Parents Parents site Sitio para padres General Health Growth & Development Infections Diseases & Conditions Pregnancy & Baby Nutrition & Fitness Emotions & Behavior School & Family ...

  15. Chlamydia (For Parents)

    Science.gov (United States)

    [Skip to Content] for Parents Parents site Sitio para padres General Health Growth & Development Infections Diseases & Conditions Pregnancy & Baby Nutrition & Fitness Emotions & Behavior School & Family ...

  16. Oral Thrush (For Parents)

    Science.gov (United States)

    [Skip to Content] for Parents Parents site Sitio para padres General Health Growth & Development Infections Diseases & Conditions Pregnancy & Baby Nutrition & Fitness Emotions & Behavior School & Family ...

  17. Diabetes Movie (For Parents)

    Medline Plus

    Full Text Available [Skip to Content] for Parents Parents site Sitio para padres General Health Growth & Development Infections Diseases & Conditions Pregnancy & Baby Nutrition & Fitness Emotions & Behavior School & Family ...

  18. Syphilis (For Parents)

    Science.gov (United States)

    [Skip to Content] for Parents Parents site Sitio para padres General Health Growth & Development Infections Diseases & Conditions Pregnancy & Baby Nutrition & Fitness Emotions & Behavior School & Family ...

  19. Chemotherapy (For Parents)

    Science.gov (United States)

    [Skip to Content] for Parents Parents site Sitio para padres General Health Growth & Development Infections Diseases & Conditions Pregnancy & Baby Nutrition & Fitness Emotions & Behavior School & Family ...

  20. Yersiniosis (For Parents)

    Science.gov (United States)

    [Skip to Content] for Parents Parents site Sitio para padres General Health Growth & Development Infections Diseases & Conditions Pregnancy & Baby Nutrition & Fitness Emotions & Behavior School & Family ...

  1. Amebiasis (For Parents)

    Science.gov (United States)

    [Skip to Content] for Parents Parents site Sitio para padres General Health Growth & Development Infections Diseases & Conditions Pregnancy & Baby Nutrition & Fitness Emotions & Behavior School & Family ...

  2. Infant Botulism (For Parents)

    Science.gov (United States)

    [Skip to Content] for Parents Parents site Sitio para padres General Health Growth & Development Infections Diseases & Conditions Pregnancy & Baby Nutrition & Fitness Emotions & Behavior School & Family ...

  3. Scarlet Fever (For Parents)

    Science.gov (United States)

    [Skip to Content] for Parents Parents site Sitio para padres General Health Growth & Development Infections Diseases & Conditions Pregnancy & Baby Nutrition & Fitness Emotions & Behavior School & Family ...

  4. Headaches (For Parents)

    Science.gov (United States)

    [Skip to Content] for Parents Parents site Sitio para padres General Health Growth & Development Infections Diseases & Conditions Pregnancy & Baby Nutrition & Fitness Emotions & Behavior School & Family ...

  5. Strep Throat (For Parents)

    Science.gov (United States)

    [Skip to Content] for Parents Parents site Sitio para padres General Health Growth & Development Infections Diseases & Conditions Pregnancy & Baby Nutrition & Fitness Emotions & Behavior School & Family ...

  6. Tourette Syndrome (For Parents)

    Science.gov (United States)

    [Skip to Content] for Parents Parents site Sitio para padres General Health Growth & Development Infections Diseases & Conditions Pregnancy & Baby Nutrition & Fitness Emotions & Behavior School & Family ...

  7. Diabetes Movie (For Parents)

    Medline Plus

    Full Text Available ... for Parents Parents site Sitio para padres General Health Growth & Development Infections Diseases & Conditions Pregnancy & Baby Nutrition & Fitness Emotions & Behavior School & Family Life First Aid & ...

  8. Sinusitis (For Parents)

    Science.gov (United States)

    [Skip to Content] for Parents Parents site Sitio para padres General Health Growth & Development Infections Diseases & Conditions Pregnancy & Baby Nutrition & Fitness Emotions & Behavior School & Family ...

  9. Laryngoscopy (For Parents)

    Science.gov (United States)

    [Skip to Content] for Parents Parents site Sitio para padres General Health Growth & Development Infections Diseases & Conditions Pregnancy & Baby Nutrition & Fitness Emotions & Behavior School & Family ...

  10. Ultrasound: Head (For Parents)

    Science.gov (United States)

    [Skip to Content] for Parents Parents site Sitio para padres General Health Growth & Development Infections Diseases & Conditions Pregnancy & Baby Nutrition & Fitness Emotions & Behavior School & Family ...

  11. Ultrasound: Pelvis (For Parents)

    Science.gov (United States)

    [Skip to Content] for Parents Parents site Sitio para padres General Health Growth & Development Infections Diseases & Conditions Pregnancy & Baby Nutrition & Fitness Emotions & Behavior School & Family ...

  12. Eczema (For Parents)

    Science.gov (United States)

    [Skip to Content] for Parents Parents site Sitio para padres General Health Growth & Development Infections Diseases & Conditions Pregnancy & Baby Nutrition & Fitness Emotions & Behavior School & Family ...

  13. Chinese Parenting Reconsideration: Parenting Practices in Taiwan.

    Science.gov (United States)

    Chen, Fu-mei; Luster, Tom

    This study examined authoritative and authoritarian parenting and specific parenting practices among Chinese mothers with preschoolers. The final sample consisted of 463 mothers with their 3 to 7 year-olds from 11 preschools, in Taiwan. Mothers completed a Chinese translation of the Parenting Behavior Questionnaire that assessed their parenting…

  14. ACHP | Sustainability and Historic Preservation Links

    Science.gov (United States)

    Preservation) Solar Panels Incorporating Solar Panels in a Rehabilitation Project (National Park Service ) Installing Solar Panels on Historic Buildings: A Survey of the Regulatory Environment (Department of Energy

  15. Cosmetic preservative labelling on the Thai market.

    Science.gov (United States)

    Bunyavaree, Monthathip; Kasemsarn, Pranee; Boonchai, Waranya

    2016-04-01

    Preservatives are added to cosmetics and other consumer products to prevent microbial growth and product degradation. Many cosmetic preservatives are skin sensitizers and frequent causes of contact dermatitis. The use of preservatives may vary by country and/or region, according to legislation, and may be reflected in differences in the prevalence rates of preservative allergy worldwide. To examine the type and frequency of preservative use in cosmetics sold in Thai markets in metropolitan Bangkok, Thailand. Preservatives contained in 1000 different cosmetics sold in Thai markets were documented and analysed, based on the labelling of ingredients. Most of the cosmetic and skincare products sold in Thai markets were international brands, with only a small proportion of cosmetic products being produced in Thailand. International brand cosmetics were more likely to contain non-formaldehyde-releasing preservatives than domestically produced brands. Isothiazolinone-based preservatives, which are responsible for the current increase in the prevalence of contact allergy, were found at a significant frequency in domestically produced, leave-on cosmetic products. Preservatives in cosmetics were significantly different according to source of production and type of cosmetics. © 2016 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

  16. Flexible Bit Preservation on a National Basis

    DEFF Research Database (Denmark)

    Jurik, Bolette; Nielsen, Anders Bo; Zierau, Eld

    2012-01-01

    In this paper we present the results from The Danish National Bit Repository project. The project aim was establishment of a system that can offer flexible and sustainable bit preservation solutions to Danish cultural heritage institutions. Here the bit preservation solutions must include support...... of bit safety as well as other requirements like e.g. confidentiality and availability. The Danish National Bit Repository is motivated by the need to investigate and handle bit preservation for digital cultural heritage. Digital preservation relies on the integrity of the bits which digital material...

  17. The heart and great vessels

    International Nuclear Information System (INIS)

    Condon, V.

    1985-01-01

    Heart disease is the fifth most common cause of death in infants and children (preceded by anoxic and hypoxic conditions, gross congenital malformations, accidental death, and immaturity). Of all the cardiac lesions, congenital heart disease (CHD) makes up the gross majority, accounting for approximately 90% of all cardiac deaths. Approximately two-thirds of all infants who die from CHD do so within the first year of life; of these, approximately one-third die within the first month. The most common cause of death in the first month is hypoplastic left heart syndrome and lesions associated with it, i.e., aortic atresia/critical aortic stenosis and mitral atresia/critical mitral stenosis. Severe coarctation of the aorta (coarctation syndrome) and transposition of the great arteries are the other most important causes of death in this age group. CHD occurs as a familial condition in approximately 1-4% of cases; ventricular septal defects, patent ductus arteriosus, and atrial septal defect are particularly common forms. Parental age plays an important role, with a significantly increased risk of CHD in infants of mothers over 39 years of age. Patent ductus arteriosus is more prevalent in firstborn children, particularly those born prematurely to young mothers. Environmental factors, such as exposure to teratogenic agents, have also been shown to increase the incidence of CHD. Children with various syndromes also have increased incidence of CHD. Down syndrome is a classic example, as are other trisomies

  18. Device of supporting a vacuum plasma vessel

    International Nuclear Information System (INIS)

    Kanoi, Minoru; Hori, Yasuro.

    1980-01-01

    Purpose: To improve the earthquake-resistance of a vacuum plasma vessel by equalizing the natural vibrations of a vibrating system formed by supporting mechanisms of the respective sectors of the vessel. Constitution: The vacuum plasma vessel is constructed of bellows interposed among a plurality of thick sector-like rings and the rings, which are respectively supported by supporting mechanisms. Thus, the vibrating systems are divided into the rings interposed with the bellows, arms as the supporting mechanisms, and posts. The natural vibrations of these vibrating systems are equalized to each other by suitably adjusting the configurations and the sized of the arms and the posts or the weight or the like of the rings. Therefore, the respective rings become vibrated at the natural vibrations equal to each other so as to largely reduce the stresses produced at both ends of the bellows. Accordingly, it can remarkably improve the earthquake-resistance of the entire plasma vessel. (Sekiya, K.)

  19. 2013 Gulf of Mexico Vessel Tracklines

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Automatic Identification Systems (AIS) are a navigation safety device that transmits and monitors the location and characteristics of many vessels in U.S. and...

  20. 2011 Gulf of Mexico Vessel Tracklines

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Automatic Identification Systems (AIS) are a navigation safety device that transmits and monitors the location and characteristics of many vessels in U.S. and...

  1. Pressure vessel for a BWR type reactor

    International Nuclear Information System (INIS)

    Shimamoto, Yoshiharu.

    1980-01-01

    Purpose: To prevent the retention of low temperature water and also prevent the thermal fatigue of the pressure vessel by making large the curvature radius of a pressure vessel of a feed water sparger fitting portion and accelerating the mixing of low-temperature water at the feed water sparger base and in-pile hot water. Constitution: The curvature radius of the corner of the feed water sparger fitting portion in a pressure vessel is formed largely. In-pile circulating water infiltrates up to the base portion of the feed water sparger to carry outside low-temperature water at the base part, which is mixed with in-pile hot water. Accordingly, low temperature water does not stay at the base portion of the feed water sparger and generation of thermal fatigue in the pressure vessel can be prevented and the safety of the BWR type reactor can be improved. (Yoshino, Y.)

  2. 2013 Pleasure Craft and Sailing Vessel Density

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Automatic Identification Systems (AIS) are a navigation safety device that transmits and monitors the location and characteristics of many vessels in U.S. and...

  3. Large Pelagic Logbook Set Survey (Vessels)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains catch and effort for fishing trips that are taken by vessels with a Federal permit issued for the swordfish and sharks under the Highly...

  4. Large Pelagic Logbook Trip Survey (Vessels)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains catch and effort for fishing trips that are taken by vessels with a Federal permit issued for the swordfish and sharks under the Highly...

  5. Initial conditioning of the TFTR vacuum vessel

    International Nuclear Information System (INIS)

    Dylla, H.F.; Blanchard, W.R.; Krawchuk, R.B.; Hawryluk, R.J.; Owens, D.K.

    1984-01-01

    We report on the initial conditioning of the Tokamak Fusion Test Reactor (TFTR) vacuum vessel prior to the initiation of first plasma discharges, and during subsequent operation with high power ohmically-heated plasmas. Following evacuation of the 86 m 3 vessel with the 10 4 1/s high vacuum pumping system, the vessel was conditioned by a 15 A dc glow discharge in H 2 at a pressure of 5 mTorr. Rapid-pulse discharge cleaning was used subsequently to preferentially condition the graphite plasma limiters. The effectiveness of the discharge cleaning was monitored by measuring the exhaust rates of the primary discharge products (CO/C 2 H 4 , CH 4 , and H 2 O). After 175 hours of glow discharge treatment, the equivalent of 50 monolayers of C and O was removed from the vessel, and the partial pressures of impurity gases were reduced to the range of 10 -9 -10 -10 Torr

  6. 75 FR 56015 - Vessel Inspection Alternatives

    Science.gov (United States)

    2010-09-15

    ... DEPARTMENT OF HOMELAND SECURITY Coast Guard 46 CFR Part 8 Vessel Inspection Alternatives CFR... Certificate; (ii) International Tonnage Certificate; (iii) Cargo Ship Safety Construction Certificate; (iv) Cargo Ship Safety Equipment Certificate; and (v) International Oil Pollution Prevention Certificate; and...

  7. Qualification of anticorrosive coatings in nuclear vessels

    International Nuclear Information System (INIS)

    Perez Flores, C.

    1985-01-01

    Test qualifications of the behavior of anticorrosive coating systems used in nuclear vessels in service and under the accident conditions of radiation decontamination, steam chemical resistance, thermal conductivity, weathering accelerated aging are presented and discussed. (author)

  8. Sealing analysis for nuclear vessels of PWR

    International Nuclear Information System (INIS)

    Qu Jiadi; Dou Yikang

    1988-01-01

    The fundamental equations of sealing analysis for vessels are given and a computer program named SMEC, which considers the change of stud loading, the elastic contact between flange mating surfaces and the transient thermal effects, is developed accordingly. The SMEC is verified by several test. On the basis of analysis, a new concept of classifying vessels into three types according to increasing or decreasing of bolt loading with increasing pressure is suggested. Type-A vessel is that in which the bolt loading increases monotonically with increasing pressure, while in type-B, the bolt loading decreases monotonically, and in type-C, the bolt loading changes nonmonotonically. It is important for vessel design to distinguish the types through analysis. The sealing mechanism is also discussed

  9. Swarm Manipulation of Large Surface Vessels

    National Research Council Canada - National Science Library

    Smith, Erik T

    2007-01-01

    The goal of this Trident project was to develop an independent control scheme to allow a team of autonomous tugboats to move a large disabled vessel, such as a barge, to a desired position and orientation...

  10. Some aspects of reactor pressure vessel integrity

    International Nuclear Information System (INIS)

    Korosec, D.; Vojvodic, G.J.

    1996-01-01

    Reactor pressure vessel of the pressurized water reactor nuclear power plant is the subject of extreme interest due to the fact that presents the pressure boundary of the reactor coolant system, which is under extreme thermal, mechanical and irradiation effects. Reactor pressure vessel by itself prevents the release of fission products to the environment. Design, construction and in-service inspection of such component is governed by strict ASME rules and other forms of administrative control. The reactor pressure vessel in nuclear power plant Kriko is designed and constructed in accordance with related ASME rules. The in-service inspection program includes all requests presented in ASME Code section XI. In the present article all major requests for the periodic inspections of reactor pressure vessel and fracture mechanics analysis are discussed. Detailed and strict fulfillment of all prescribed provisions guarantee the appropriate level of nuclear safety. (author)

  11. Atlantic Marine Mammal Assessment Vessel Surveys

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — These data sets are a compilation of large vessel surveys for marine mammal stock assessments in South Atlantic (Florida to Maryland) waters from 1994 to the...

  12. Method to moor an offshore operating vessel

    Energy Technology Data Exchange (ETDEWEB)

    Flory, J.F.

    1983-01-24

    A vessel such as a storage vessel is permanently moored, by means such as a yoke pivoted on the forecastle of the vessel, to a mooring leg, e.g. a riser or anchor chain, which is attached to a base located on the ocean floor. Mounted on the vessel is tension exsisting means, for example, counterweights, springs, winches, or the like, operably connected with the mooring leg for applying tension thereto such as by lifting the yoke. The top of the mooring leg is connected to the end of the yoke through a mooring swivel and a gimbaled mooring table or a universal joint. A fluid swivel may be located above the mooring table or about a load-carrying shaft connected to the mooring leg. 8 drawings.

  13. Caribbean Marine Mammal Assessment Vessel Surveys

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — These data sets are a compilation of large vessel surveys for marine mammal stock assessments in Caribbean waters conducted during 2000-2001. These surveys were...

  14. Advanced toroidal facility vaccuum vessel stress analyses

    International Nuclear Information System (INIS)

    Hammonds, C.J.; Mayhall, J.A.

    1987-01-01

    The complex geometry of the Advance Toroidal Facility (ATF) vacuum vessel required special analysis techniques in investigating the structural behavior of the design. The response of a large-scale finite element model was found for transportation and operational loading. Several computer codes and systems, including the National Magnetic Fusion Energy Computer Center Cray machines, were implemented in accomplishing these analyses. The work combined complex methods that taxed the limits of both the codes and the computer systems involved. Using MSC/NASTRAN cyclic-symmetry solutions permitted using only 1/12 of the vessel geometry to mathematically analyze the entire vessel. This allowed the greater detail and accuracy demanded by the complex geometry of the vessel. Critical buckling-pressure analyses were performed with the same model. The development, results, and problems encountered in performing these analyses are described. 5 refs., 3 figs

  15. Caribbean ST Thomas trap Logbook Survey (Vessels)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains catch (landed catch) and effort for fishing trips made by vessels fishing in St. Thomas. The catch and effort data for the entire trip are...

  16. 2011 Pleasure Craft Sailing Vessel Density

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Automatic Identification Systems (AIS) are a navigation safety device that transmits and monitors the location and characteristics of many vessels in U.S. and...

  17. Final processing vessel for radioactive waste

    International Nuclear Information System (INIS)

    Tejima, Takaya; Hiraki, Akimitsu.

    1989-01-01

    An inorganic inner layer comprising dense inorganic material such as organic polymer-impregnated concretes is formed to about 10 - 50 mm in average thickness at the inside of a metal vessel. Further, the surface of the vessel is formed as a flat surface with no or only small reinforcing protrusions. Thus, if the final processing vessel should be dropped during transportation or handling by mistake, since impact shocks do not concentrate to protrusions as usual, no local stress concentration occurs to the inorganic inner liner layer. Accordingly, the risk of rapture can be reduced greatly. Further, since impact shock resistance layer put between the metal vessel and the inorganic inner liner layer absorbs shocks, a further sufficient strength can be obtained against dropping accident. (T.M.)

  18. Fatigue evaluation in reactor vessel components

    International Nuclear Information System (INIS)

    Mattar Neto, Miguel; Miranda, Carlos A. de J.

    1994-01-01

    This paper presents a sequence of increasing complexity forms of evaluating fatigue damage of nuclear pressure vessel components caused by cycling loadings. Examples are included in order to illustrate such procedures. (author)

  19. MRA of fibromuscular dysplasia in cervical vessels

    International Nuclear Information System (INIS)

    Link, J.; Steffens, J.C.; Mueller-Huelsbeck, S.; Brossmann, J.; Heller, M.

    1996-01-01

    In 386 selective angiograms of cervical vessels fibromuscular dysplasia was revealed in 4 female patients in the age of 30-54 years. FMD was located in the carotid artery (n=5) and in the vertebral artery (n=2) with a total of 8 lesions. 6/8 of the lesions of the seven cervical vessels were located typically in the mid cervical portion of the vessels and 2/6 lesions were located in the atlas loop of the vertebral artery. 4 lesions showed moderate stenosis and 4 vessels showed only mild stenosis. These patterns which demonstrated the typical morphology of fibromuscular dysplasia with alternating irregular zones of widening and narrowing were evaluated well with MR angiography, the others were missed. (orig./MG) [de

  20. A case of small vessel vasculitis

    Directory of Open Access Journals (Sweden)

    Madhulika Mahashabde

    2014-01-01

    We are reporting a case of un-specified small vessel vasculitis, which was diagnosed on the basis of positive perinuclear anti neutrophil cytoplasmic antibodies (ANCA P MPO done by Enzyme Linked Immunosorbent Assay (ELISA.

  1. Subconjunctival Hemorrhage (Broken Blood Vessel in Eye)

    Science.gov (United States)

    Subconjunctival hemorrhage (broken blood vessel in eye) Overview A subconjunctival hemorrhage (sub-kun-JUNK-tih-vul HEM-uh-ruj) ... may not even realize you have a subconjunctival hemorrhage until you look in the mirror and notice ...

  2. TMI-2 Vessel Investigation Project integration report

    Energy Technology Data Exchange (ETDEWEB)

    Wolf, J. R.; Rempe, J. L.; Stickler, L. A.; Korth, G. E.; Diercks, D. R.; Neimark, L. A.; Akers, D W; Schuetz, B. K.; Shearer, T L; Chavez, S. A.; Thinnes, G. L.; Witt, R. J.; Corradini, M L; Kos, J. A. [EG and G Idaho, Inc., Idaho Falls, ID (United States)

    1994-03-01

    The Three Mile Island Unit 2 (TMI-2) Vessel Investigation Project (VIP) was an international effort that was sponsored by the Nuclear Energy Agency of the Organization for Economic Cooperation and Development. The primary objectives of the VIP were to extract and examine samples from the lower head and to evaluate the potential modes of failure and the margin of structural integrity that remained in the TMI-2 reactor vessel during the accident. This report presents a summary of the major findings and conclusions that were developed from research during the VIP. Results from the various elements of the project are integrated to form a cohesive understanding of the vessel`s condition after the accident.

  3. Wine vessels (Vasa vinaria in roman law

    Directory of Open Access Journals (Sweden)

    Aličić Samir

    2017-01-01

    Full Text Available The notion of 'wine vessels' in Roman law comprises all the winecontaining recipients. There is no legal standardization of wine vessels by means of volume, and although the terms amphora, urna and culleus are used to designate both the vessels and the units of measure, these are two different meanings of the terms. In regard of the question, whether the vessels make appurtenance of the wine, jurisprudents of proculean school divided them in two categories. In the first category are those that follow legal status of wine, usually amphoras and other jars (cadi which are used for 'packaging', i. e. 'bottling' of the wine. The second category make mostly vats (cuppae and ceramic cisterns (dolia, which don't follow legal status of wine, making instead part of farming equipment of a landed property (instrumentum fundi and it's appurtenance. But, the roman jurists are not consistent regarding criteria for distinguishing these two categories.

  4. Conjugate heat transfer analysis for in-vessel retention with external reactor vessel cooling

    International Nuclear Information System (INIS)

    Park, Jong-Woon; Bae, Jae-ho; Song, Hyuk-Jin

    2016-01-01

    Highlights: • A conjugate heat transfer analysis method is applied for in-vessel corium retention. • 3D heat diffusion has a formidable effect in alleviating focusing heat load from metallic layer. • The focusing heat load is decreased by about 2.5 times on the external surface. - Abstract: A conjugate heat transfer analysis method for the thermal integrity of a reactor vessel under external reactor vessel cooling conditions is developed to resolve light metal layer focusing effect issue for in-vessel retention. The method calculates steady-state three-dimensional temperature distribution of a reactor vessel using coupled conjugate heat transfer between in-vessel three-layered stratified corium (metallic pool, oxide pool and heavy metal and polar-angle dependent boiling heat transfer at the outer surface of a reactor vessel). The three-layer corium heat transfer model is utilizing lumped-parameter thermal-resistance circuit method. For the ex-vessel boiling boundary conditions, nucleate, transition and film boiling are considered. The thermal integrity of a reactor vessel is addressed in terms of heat flux at the outer-most nodes of the vessel and remaining thickness profile. The vessel three-dimensional heat conduction is validated against a commercial code. It is found that even though the internal heat flux from the metal layer goes far beyond critical heat flux (CHF) the heat flux from the outermost nodes of the vessel may be maintained below CHF due to massive vessel heat diffusion. The heat diffusion throughout the vessel is more pronounced for relatively low heat generation rate in an oxide pool. Parametric calculations are performed considering thermal conditions such as peak heat flux from a light metal layer, heat generation in an oxide pool and external boiling conditions. The major finding is that the most crucial factor for success of in-vessel retention is not the mass of the molten light metal above the oxide pool but the heat generation rate

  5. Results of reactor pressure vessels ISI

    International Nuclear Information System (INIS)

    Cepcek, S.

    1994-01-01

    To find out the possible influence of the annealing process to reactor pressure vessel integrity, a large in-service inspection programme has been implemented as an associated activity to reactor pressure vessel annealing. In this paper the approach to the RPV in-service inspection is shown. Also, the main results and conclusions following in-service inspection are presented. (author). 3 refs, 1 fig

  6. Anatomically corrected transposition of great vessels

    International Nuclear Information System (INIS)

    Ivanitskij, A.V.; Sarkisova, T.N.

    1989-01-01

    The paper is concerned with the description of rare congenital heart disease: anatomically corrected malposition of major vessels in a 9-mos 24 day old girl. The diagnosis of this disease was shown on the results of angiocardiography, concomitant congenital heart diseases were descibed. This abnormality is characterized by common atrioventricular and ventriculovascular joints and inversion position of the major vessels, it is always attended by congenital heart diseases. Surgical intervention is aimed at the elimination of concomitant heart dieseases

  7. Analysis of nuclear reactor pressure vessel flanges

    International Nuclear Information System (INIS)

    Oliveira, C.A.N. de; Augusto, O.B.

    1985-01-01

    This work proposes a methodology for the structural analysis of high diameter nuclear reactor pressure vessel flanges. In the analysis the vessel is divided into shell-of-revolution elements, the flanges are represented by rigid rings, and the bolts are treated as beams. The flexibility method is used for solving the problem, and the results are compared with results obtained by the finite element method. (Author) [pt

  8. Reactor vessel nozzle cracks: a photoelastic study

    International Nuclear Information System (INIS)

    Smith, C.W.

    1979-01-01

    A method consisting of a marriage between the ''frozen stress'' photoelastic approach and the local stress field equations of linear elastic fracture mechanics for estimating stress intensity factor distributions in three dimensional, finite cracked body problems is reviewed and extensions of the method are indicated. The method is then applied to the nuclear reactor vessel nozzle corner crack problem for both Intermediate Test Vessel and Boiling Water Reactor geometries. Results are compared with those of other investigators. 35 refs

  9. Proof testing of an explosion containment vessel

    Energy Technology Data Exchange (ETDEWEB)

    Esparza, E.D. [Esparza (Edward D.), San Antonio, TX (United States); Stacy, H.; Wackerle, J. [Los Alamos National Lab., NM (United States)

    1996-10-01

    A steel containment vessel was fabricated and proof tested for use by the Los Alamos National Laboratory at their M-9 facility. The HY-100 steel vessel was designed to provide total containment for high explosives tests up to 22 lb (10 kg) of TNT equivalent. The vessel was fabricated from an 11.5-ft diameter cylindrical shell, 1.5 in thick, and 2:1 elliptical ends, 2 in thick. Prior to delivery and acceptance, three types of tests were required for proof testing the vessel: a hydrostatic pressure test, air leak tests, and two full design charge explosion tests. The hydrostatic pressure test provided an initial static check on the capacity of the vessel and functioning of the strain instrumentation. The pneumatic air leak tests were performed before, in between, and after the explosion tests. After three smaller preliminary charge tests, the full design charge weight explosion tests demonstrated that no yielding occurred in the vessel at its rated capacity. The blast pressures generated by the explosions and the dynamic response of the vessel were measured and recorded with 33 strain channels, 4 blast pressure channels, 2 gas pressure channels, and 3 displacement channels. This paper presents an overview of the test program, a short summary of the methodology used to predict the design blast loads, a brief description of the transducer locations and measurement systems, some of the hydrostatic test strain and stress results, examples of the explosion pressure and dynamic strain data, and some comparisons of the measured data with the design loads and stresses on the vessel.

  10. Design concept for vessels and heat exchangers

    International Nuclear Information System (INIS)

    Elfmann, W.; Ferrari, L.D.B.

    1981-01-01

    A design concept for vessels and heat exchangers against internal and external loads resulting from normal operation and accident is shown. A definition and explanation of the operating conditions and stress levels are given. A description of the type of analysis (stress, fatigue, deformation, stability, earthquake and vibration) is presented in detail, also including technical guidelines which are used for the vessels and heat exchangers and their individual structure parts. (Author) [pt

  11. ITER vacuum vessel design and electromagnetic analysis on in-vessel components

    International Nuclear Information System (INIS)

    Ioki, K.; Johnson, G.; Shimizu, K.; Williamson, D.; Iizuka, T.

    1995-01-01

    Major functional requirements for the vacuum vessel are to provide the first safety barrier and to support electromagnetic loads due to plasma disruptions and vertical displacement events, and to withstand plausible accidents without losing confinement. A double wall structure concept has been developed for the vacuum vessel due to its beneficial characteristics from the viewpoints of structural integrity and electrical continuity. An electromagnetic analysis of the blanket modules and the vacuum vessel has been performed to investigate force distributions on in-vessel components. According to the vertical displacement events (VDE) scenario, which assumes a critical q-value of 1.5, the total downward vertical force, induced by coupling between the eddy current and external fields, is about 110 MN. We have performed a stress analysis for the vacuum vessel using the VDE disruption forces acting on the blankets, and a maximum stress intensity of 112 MPa was obtained in the vicinity of the lower support of the vessel. (orig.)

  12. Pressure vessel integrity and weld inspection procedure

    International Nuclear Information System (INIS)

    Solomon, K.A.; Okrent, D.; Kastenberg, W.E.

    1975-01-01

    The primary objective of this paper is to develop a simple methodology which, when coupled with existing observations on pressure vessel behavior, provides an inter-relation between pressure vessel integrity, and the parameters of the in-service inspection program, including inspection sample size, frequency and efficiency. A modified Markov process is employed and a computer code was written to obtain numerical results. The Markov process mathematically describes the following physical events. In a nuclear reactor pressure vessel weld, some defects may exist prior to the zeroth inspection (i.e., prior to vessel operation). During the zeroth inspection and repair processes, some of these defects are removed. During the first cycle of vessel operation, the existing defects may grow and some new defects may be generated. Those defects that are found at the first (and succeeding) inspection interval and warrant repair, are repaired. The above process continues through several operating cycles to the end of vessel life. During any inspection, only a portion of the welds may be inspected, and with less than perfect efficiency

  13. Problems in Pressure Vessel Design and Manufacture

    Energy Technology Data Exchange (ETDEWEB)

    Hellstroem, O [Uddeholms AB, Degerfors (Sweden); Nilson, Ragnar [AB Atomenergi, Nykoeping (Sweden)

    1963-05-15

    The general desire by the power reactor process makers to increase power rating and their efforts to involve more advanced thermal behaviour and fuel handling facilities within the reactor vessels are accompanied by an increase in both pressure vessel dimensions and various difficulties in giving practical solutions of design materials and fabrication problems. In any section of this report it is emphasized that difficulties and problems already met with will meet again in the future vessels but then in modified forms and in many cases more pertinent than before. As for the increase in geometrical size it can be postulated that with use of better materials and adjusted fabrication methods the size problems can be taken proper care of. It seems likely that vessels of sufficient large diameter and height for the largest power output, which is judged as interesting in the next ten year period, can be built without developing totally new site fabrication technique. It is, however, supposed that such a fabrication technique will be feasible though at higher specific costs for the same quality requirements as obtained in shop fabrication. By the postulated use of more efficient vessel material with principally the same good features of easy fabrication in different stages such as preparation, welding, heat treatment etc as ordinary or slightly modified carbon steels the increase in wall thickness might be kept low. There exists, however, a development work to be done for low-alloy steels to prove their justified use in large reactor pressure vessels.

  14. The pressure vessel for the NSF tandem

    International Nuclear Information System (INIS)

    Jones, C.W.

    1979-04-01

    The pressure vessel is a major component of the 30 MV tandem Van de Graaff electrostatic accelerator to be used in nuclear structure research at Daresbury Laboratory. The accelerator will be capable of accelerating the full range of ions in the form of a beam. Acceleration takes place in a vertical evacuated tube (beam tube) by means of a high potential on a terminal at the central position, the terminal and beam tube assembly being supported by an insulated stack structure within the pressure vessel. Under operating conditions the vessel is filled with sulphur hexafluoride gas (SF 6 ) at high pressure which acts as an insulating medium between the centre terminal and the vessel wall. The vessel is situated inside a concrete tower which besides supporting the injector room above the vessel also acts as radiation shielding around the accelerator. The report covers: functional requirements; fundamental considerations with regard to the design and procurement; detail design; materials; manufacture; acceptance test; surface treatment; final leak test. (U.K.)

  15. Crack propagation on spherical pressure vessels

    International Nuclear Information System (INIS)

    Lebey, J.; Roche, R.

    1975-01-01

    The risk presented by a crack on a pressure vessel built with a ductile steel cannot be well evaluated by simple application of the rules of Linear Elastic Fracture Mechanics, which only apply to brittle materials. Tests were carried out on spherical vessels of three different scales built with the same steel. Cracks of different length were machined through the vessel wall. From the results obtained, crack initiation stress (beginning of stable propagation) and instable propagation stress may be plotted against the lengths of these cracks. For small and medium size, subject to ductile fracture, the resulting curves are identical, and may be used for ductile fracture prediction. Brittle rupture was observed on larger vessels and crack propagation occurred at lower stress level. Preceedings curves are not usable for fracture analysis. Ultimate pressure can be computed with a good accuracy by using equivalent energy toughness, Ksub(1cd), characteristic of the metal plates. Satisfactory measurements have been obtained on thin samples. The risks of brittle fracture may then judged by comparing Ksub(1cd) with the calculated K 1 value, in which corrections for vessel shape are taken into account. It is thus possible to establish the bursting pressure of cracked spherical vessels, with the help of two rules, one for brittle fracture, the other for ductile instability. A practical method is proposed on the basis of the work reported here

  16. Problems in Pressure Vessel Design and Manufacture

    International Nuclear Information System (INIS)

    Hellstroem, O.; Nilson, Ragnar

    1963-05-01

    The general desire by the power reactor process makers to increase power rating and their efforts to involve more advanced thermal behaviour and fuel handling facilities within the reactor vessels are accompanied by an increase in both pressure vessel dimensions and various difficulties in giving practical solutions of design materials and fabrication problems. In any section of this report it is emphasized that difficulties and problems already met with will meet again in the future vessels but then in modified forms and in many cases more pertinent than before. As for the increase in geometrical size it can be postulated that with use of better materials and adjusted fabrication methods the size problems can be taken proper care of. It seems likely that vessels of sufficient large diameter and height for the largest power output, which is judged as interesting in the next ten year period, can be built without developing totally new site fabrication technique. It is, however, supposed that such a fabrication technique will be feasible though at higher specific costs for the same quality requirements as obtained in shop fabrication. By the postulated use of more efficient vessel material with principally the same good features of easy fabrication in different stages such as preparation, welding, heat treatment etc as ordinary or slightly modified carbon steels the increase in wall thickness might be kept low. There exists, however, a development work to be done for low-alloy steels to prove their justified use in large reactor pressure vessels

  17. Fertility Preservation for Transgender Adolescents.

    Science.gov (United States)

    Chen, Diane; Simons, Lisa; Johnson, Emilie K; Lockart, Barbara A; Finlayson, Courtney

    2017-07-01

    To describe fertility preservation (FP) utilization by transgender adolescents within a pediatric gender clinic between July 2013 and July 2016. A retrospective chart review was conducted to abstract demographic and clinical information among adolescents initiating gender-affirming hormones, including patient age at initial FP consultation, birth-assigned sex, race/ethnicity, and outcome of FP consultation. In our sample of 105 transgender adolescents, a total of 13 (seven transgender men and six transgender women) between the age of 14.2 and 20.6 years were seen in formal consultation for FP before initiating hormones. Of these adolescents, four completed sperm cryopreservation and one completed oocyte cryopreservation. Rates of FP utilization among transgender youth were low, which is consistent with a recently published report of FP utilization among transgender youth at another pediatric institution. Identified barriers to FP in our sample included cost, invasiveness of procedures, and desire not to delay medical transition. Copyright © 2017 Society for Adolescent Health and Medicine. Published by Elsevier Inc. All rights reserved.

  18. Preserving Data for Renewable Energy

    Science.gov (United States)

    Macduff, M.; Sivaraman, C.

    2017-12-01

    The EERE Atmosphere to Electrons (A2e) program established the Data Archive and Portal (DAP) to ensure the long-term preservation and access to A2e research data. The DAP has been operated by PNNL for 2 years with data from more than a dozen projects and 1PB of data and hundreds of datasets expected to be stored this year. The data are a diverse mix of model runs, observational data, and dervived products. While most of the data is public, the DAP has securely stored many proprietary data sets provided by energy producers that are critical to the research goals of the A2e program. The DAP uses Amazon Web Services (AWS) and PNNL resources to provide long-term archival and access to the data with appropriate access controls. As a key element of the DAP, metadata are collected for each dataset to assist with data discovery and usefulness of the data. Further, the DAP has begun a process of standardizing observation data into NetCDF, which allows users to focus on the data instead of parsing the many formats. Creating a central repository that is in tune with the unique needs of the A2e research community is helping active tasks today as well as making many future research efforts possible. In this presentation, we provide an overview the DAP capabilities and benefits to the renewable energy community.

  19. Food preservation by ionising radiation

    International Nuclear Information System (INIS)

    Andrade, M. E.

    1996-01-01

    The process of food preservation by ionising radiation is an alternative, or a complement, to the traditional methods of heating, refrigerating, freezing or using chemical additives. The study and development of this technique has started on the beginning of the fifties but it is based on the radiation killing effect on micro-organisms discovered by the end of last century. Foodstuffs are treated in appropriate plants: isotopic facilities (gamma radiation) and accelerated electron beams produced by machines called accelerators. The FAO and WHO in close cooperation with the IAEA have played an important role on the development of the process and on the increment of the industrial application of food irradiation. Over the world there are about 37 countries trading foods treated by ionising radiation. However, governments have been slow to clear the utilization of this process. The main reason of this attitude is in general due to the fact that the advantages of the technique are not clearly understood. Therefore, the dissemination of the information could on one hand clarify who has to take decisions and on the other hand support the choice of those foods by the consumers. This is the unique way to dynamize the application of this process

  20. Endothelial cell preservation at hypothermic to normothermic conditions using clinical and experimental organ preservation solutions

    NARCIS (Netherlands)

    Post, Ivo C. J. H.; de Boon, Wadim M. I.; Heger, Michal; van Wijk, Albert C. W. A.; Kroon, Jeffrey; van Buul, Jaap D.; van Gulik, Thomas M.

    2013-01-01

    Endothelial barrier function is pivotal for the outcome of organ transplantation. Since hypothermic preservation (gold standard) is associated with cold-induced endothelial damage, endothelial barrier function may benefit from organ preservation at warmer temperatures. We therefore assessed

  1. Limiting Factors for External Reactor Vessel Cooling

    International Nuclear Information System (INIS)

    Cheung, F.B.

    2005-01-01

    The method of external reactor vessel cooling (ERVC) that involves flooding of the reactor cavity during a severe accident has been considered a viable means for in-vessel retention (IVR). For high-power reactors, however, there are some limiting factors that might adversely affect the feasibility of using ERVC as a means for IVR. In this paper, the key limiting factors for ERVC have been identified and critically discussed. These factors include the choking limit for steam venting (CLSV) through the bottleneck of the vessel/insulation structure, the critical heat flux (CHF) for downward-facing boiling on the vessel outer surface, and the two-phase flow instabilities in the natural circulation loop within the flooded cavity. To enhance ERVC, it is necessary to eliminate or relax these limiting factors. Accordingly, methods to enhance ERVC and thus improve margins for IVR have been proposed and demonstrated, using the APR1400 as an example. The strategy is based on using two distinctly different methods to enhance ERVC. One involves the use of an enhanced vessel/insulation design to facilitate steam venting through the bottleneck of the annular channel. The other involves the use of an appropriate vessel coating to promote downward-facing boiling. It is found that the use of an enhanced vessel/insulation design with bottleneck enlargement could greatly facilitate the process of steam venting through the bottleneck region as well as streamline the resulting two-phase motions in the annular channel. By selecting a suitable enhanced vessel/insulation design, not only the CLSV but also the CHF limits could be significantly increased. In addition, the problem associated with two-phase flow instabilities and flow-induced mechanical vibration could be minimized. It is also found that the use of vessel coatings made of microporous metallic layers could greatly facilitate downward-facing boiling on the vessel outer surface. With vessel coatings, the local CHF limits at

  2. Evaluation of the efficiency of regional health-preserving educational space formation

    Directory of Open Access Journals (Sweden)

    Riza Akhmedzakievich Kasimov

    2014-11-01

    Full Text Available The article is devoted to the urgent problem of preserving children’s health. The author presents detailed characteristics of health-preserving educational space formation. It is regarded as a complex multilevel and multispectral system. The article defines the principles, methods, mechanisms of the health-preserving process on the municipal level. The subject of research includes the background, conditions and resources of health-preserving educational space formation. The participants of educational process (students, teachers, parents and representatives of local authorities are the object of the research. The study aims to evaluate the efficiency of health-preserving educational space formation within various conceptual and methodological approaches and the degree of involvement of the municipal authorities. In the course of the experiment the author tests the method of estimating the models of regional healthpreserving educational space formation and healthy lifestyle training, developed by the author. The article pays considerable attention to the justification of choosing the optimal strategy within the implementation of health preserving technologies on municipal level. It shows the crucial role of constructive inter-agency cooperation between the education system, health care and the authorities for effective and productive activities in this sphere

  3. Anuran artifacts of preservation: 27 years later

    Directory of Open Access Journals (Sweden)

    Jessica L. Deichmann

    2009-07-01

    Full Text Available Measurements made on preserved anuran specimens are often used in studies of systematics, ecology and evolution. Here, we examine the effect of preservation on one of the most common measurement of frogs, snout-urostyle length (SUL. Preservation had significanteffects on the SUL of 13 of the 14 species of North American frogs included in this study, with all species decreasing in SUL by 0.31-5.62%. Smaller frog species did not shrink proportionally more or less than larger species. Absolute shrinkage was correlated with SUL and was greater in larger species. Within species, percent shrinkage was not significantly correlated with SUL in 10 species, but significantly greater for larger individuals in 3 species, and decreased with size in 1 species. Absolute shrinkage was statistically greater for larger individuals in 4 species. Our results agree with studies of morphological permutations in fish which show that most preservation-related changes take place within the first few months after initial preservation. We suggest that the potential consequences of using preserved specimens in research must be considered and that future studies continue to examine preservation effects, not only on frogs, but on all preserved specimens used in scientific investigations.

  4. Film sound in preservation and presentation

    NARCIS (Netherlands)

    Campanini, S.

    2014-01-01

    What is the nature of film sound? How does it change through time? How can film sound be conceptually defined? To address these issues, this work assumes the perspective of film preservation and presentation practices, describing the preservation of early sound systems, as well as the presentation

  5. Corn, alfalfa and grass silage preservation principles

    Science.gov (United States)

    Ensiling is the primary means of preserving moist forages for feeding livestock. In ensiling, the crop is stored anaerobically, and sugars in the crop are fermented by lactic acid bacteria naturally on the crop. The crop is preserved by the combination of the acids produced by the lactic acid bacter...

  6. Survey of postharvest handling, preservation and processing ...

    African Journals Online (AJOL)

    Survey of postharvest handling, preservation and processing practices along the camel milk chain in Isiolo district, Kenya. ... Despite the important contribution of camel milk to food security for pastoralists in Kenya, little is known about the postharvest handling, preservation and processing practices. In this study, existing ...

  7. 7 CFR 782.14 - Identity preservation.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 7 2010-01-01 2010-01-01 false Identity preservation. 782.14 Section 782.14 Agriculture Regulations of the Department of Agriculture (Continued) FARM SERVICE AGENCY, DEPARTMENT OF... § 782.14 Identity preservation. (a) The importer and all subsequent buyers of the imported wheat shall...

  8. 20 CFR 638.304 - Historical preservation.

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 3 2010-04-01 2010-04-01 false Historical preservation. 638.304 Section 638.304 Employees' Benefits EMPLOYMENT AND TRAINING ADMINISTRATION, DEPARTMENT OF LABOR JOB CORPS PROGRAM... § 638.304 Historical preservation. The Job Corps Director shall review the “National Register of...

  9. Home Food Preservation Training for Extension Educators

    Science.gov (United States)

    Goard, Linnette Mizer; Hill, Melinda; Shumaker, Katharine; Warrix, Marisa

    2013-01-01

    During times of economic downturn, there has been an increased interest in home food preservation. As the primary resource for current research-based recommendations, a team of Extension Family and Consumer Sciences educators with specialization in food safety and food preservation responded to this demand by developing a standardized food…

  10. Historic Preservation Vocabulary, Designations, and Resources

    Science.gov (United States)

    Williams, Stacy D.

    2011-01-01

    Preservationists use a common language that had its beginnings in the National Historic Preservation Act of 1966. This act created the Secretary of the Interior's Standards for the Treatment of Historic Properties, which defined the terms and treatments that have become the standard for preservation projects and plans. These terms have been used…

  11. Emerging concepts in liver graft preservation

    Science.gov (United States)

    Bejaoui, Mohamed; Pantazi, Eirini; Folch-Puy, Emma; Baptista, Pedro M; García-Gil, Agustín; Adam, René; Roselló-Catafau, Joan

    2015-01-01

    The urgent need to expand the donor pool in order to attend to the growing demand for liver transplantation has obliged physicians to consider the use of suboptimal liver grafts and also to redefine the preservation strategies. This review examines the different methods of liver graft preservation, focusing on the latest advances in both static cold storage and machine perfusion (MP). The new strategies for static cold storage are mainly designed to increase the fatty liver graft preservation via the supplementation of commercial organ preservation solutions with additives. In this paper we stress the importance of carrying out effective graft washout after static cold preservation, and present a detailed discussion of the future perspectives for dynamic graft preservation using MP at different temperatures (hypothermia at 4 °C, normothermia at 37 °C and subnormothermia at 20 °C-25 °C). Finally, we highlight some emerging applications of regenerative medicine in liver graft preservation. In conclusion, this review discusses the “state of the art” and future perspectives in static and dynamic liver graft preservation in order to improve graft viability. PMID:25593455

  12. Whale Preservation. Grades Five to Nine.

    Science.gov (United States)

    Racicot, Darlene

    Dedicated to the conservation and preservation of whales, dolphins, and porpoises through public education, this instructional unit for grades 5-9 provides current (1993) facts, lesson plans, activities, and conservation and preservation techniques. Interdisciplinary activities involve students in debates, critical thinking, research, and…

  13. Fertility Preservation for Children Diagnosed with Cancer

    Medline Plus

    Full Text Available ... content SaveMyFertility An Online Fertility Preservation Toolkit for Patients and Their Providers Open menu Reprotopia_Main_Menu ... Cancer Fertility Preservation for Children Diagnosed with Cancer Patient Pocket Guides Patient Pocket Guides Patient Guides Fertility ...

  14. Knowledge preservation in the nuclear industry

    International Nuclear Information System (INIS)

    Yanev, Y.

    2004-01-01

    The paper presents examples of knowledge loss in different areas related to attrition, retirements or layoff as well as the consequences of the loss of knowledge. The nature of the so called tacit knowledge and its role as a barrier to knowledge preservation is discussed. Strategies for knowledge preservation in the nuclear industry are presented

  15. Fertility Preservation for Children Diagnosed with Cancer

    Medline Plus

    Full Text Available ... this website. Skip to main content SaveMyFertility An Online Fertility Preservation Toolkit for Patients and Their Providers ... Visit the Oncofertility Consortium Web site Use the online Clinic/Center Finder to find the fertility preservation ...

  16. Preservation in the Age of Google: Digitization, Digital Preservation, and Dilemmas

    Science.gov (United States)

    Conway, Paul

    2010-01-01

    The cultural heritage preservation community now functions largely within the environment of digital technologies. This article begins by juxtaposing definitions of the terms "digitization for preservation" and "digital preservation" within a sociotechnical environment for which Google serves as a relevant metaphor. It then reviews two reports…

  17. Size ratio performance in detecting cerebral aneurysm rupture status is insensitive to small vessel removal.

    Science.gov (United States)

    Lauric, Alexandra; Baharoglu, Merih I; Malek, Adel M

    2013-04-01

    The variable definition of size ratio (SR) for sidewall (SW) vs bifurcation (BIF) aneurysms raises confusion for lesions harboring small branches, such as carotid ophthalmic or posterior communicating locations. These aneurysms are considered SW by many clinicians, but SR methodology classifies them as BIF. To evaluate the effect of ignoring small vessels and SW vs stringent BIF labeling on SR ruptured aneurysm detection performance in borderline aneurysms with small branches, and to reconcile SR-based labeling with clinical SW/BIF classification. Catheter rotational angiographic datasets of 134 consecutive aneurysms (60 ruptured) were automatically measured in 3-dimensional. Stringent BIF labeling was applied to clinically labeled aneurysms, with 21 aneurysms switching label from SW to BIF. Parent vessel size was evaluated both taking into account, and ignoring, small vessels. SR was defined accordingly as the ratio between aneurysm and parent vessel sizes. Univariate and multivariate statistics identified significant features. The square of the correlation coefficient (R(2)) was reported for bivariate analysis of alternative SR calculations. Regardless of SW/BIF labeling method, SR was equally significant in discriminating aneurysm ruptured status (P analysis of alternative SR had a high correlation of R(2) = 0.94 on the whole dataset, and R = 0.98 on the 21 borderline aneurysms. Ignoring small branches from SR calculation maintains rupture status detection performance, while reducing postprocessing complexity and removing labeling ambiguity. Aneurysms adjacent to these vessels can be considered SW for morphometric analysis. It is reasonable to use the clinical SW/BIF labeling when using SR for rupture risk evaluation.

  18. Package Formats for Preserved Digital Material

    DEFF Research Database (Denmark)

    Zierau, Eld

    2012-01-01

    This paper presents an investigation of the best suitable package formats for long term digital preservation. The choice of a package format for preservation is crucial for future access, thus a thorough analysis of choice is important. The investigation presented here covers setting up requireme......This paper presents an investigation of the best suitable package formats for long term digital preservation. The choice of a package format for preservation is crucial for future access, thus a thorough analysis of choice is important. The investigation presented here covers setting up...... requirements for package formats used for long term preserved digital material, and using these requirements as the basis for analysing a range of package formats. The result of the concrete investigation is that the WARC format is the package format best suited for the listed requirements. Fulfilling...

  19. Scaling Theory for Pulsed Jet Mixed Vessels, Sparging, and Cyclic Feed Transport Systems for Slurries

    Energy Technology Data Exchange (ETDEWEB)

    Kuhn, William L.; Rector, David R.; Rassat, Scot D.; Enderlin, Carl W.; Minette, Michael J.; Bamberger, Judith A.; Josephson, Gary B.; Wells, Beric E.; Berglin, Eric J.

    2013-09-27

    This document is a previously unpublished work based on a draft report prepared by Pacific Northwest National Laboratory (PNNL) for the Hanford Waste Treatment and Immobilization Plant (WTP) in 2012. Work on the report stopped when WTP’s approach to testing changed. PNNL is issuing a modified version of the document a year later to preserve and disseminate the valuable technical work that was completed. This document establishes technical bases for evaluating the mixing performance of Waste Treatment Plant (WTP) pretreatment process tanks based on data from less-than-full-scale testing, relative to specified mixing requirements. The technical bases include the fluid mechanics affecting mixing for specified vessel configurations, operating parameters, and simulant properties. They address scaling vessel physical performance, simulant physical performance, and “scaling down” the operating conditions at full scale to define test conditions at reduced scale and “scaling up” the test results at reduced scale to predict the performance at full scale. Essentially, this document addresses the following questions: • Why and how can the mixing behaviors in a smaller vessel represent those in a larger vessel? • What information is needed to address the first question? • How should the information be used to predict mixing performance in WTP? The design of Large Scale Integrated Testing (LSIT) is being addressed in other, complementary documents.

  20. Vessel fluence evaluation for SMART using DLC-23 and DLC-185 data libraries

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Kyo Youn; Cho, Byung Oh; Joo, Han Gyu [Korea Atomic Energy Research Institute, Taejon (Korea)

    1999-10-01

    In this report, it was performed the vessel fluence evaluation for SMART using nuclear cross-section libraries of DLC-23/CASK and DLC-185/BUGLE-96 and it was compared with the results. It was shown that the maximum neutron fluences for the inner surface of SMART vessel, which has 60 years lifetime and 90% capacity factor, resulted from using DLC-23/CASK and DLC-185/BUGLE-96 are 2.88x10{sup 16} n/cm{sup 2} and 1.98 x10{sup 16} n/cm{sup 2}, respectively. It is concluded that the fast neutron fluence at the reactor pressure vessel of SMART is far less than 1.0x10{sup 20} n/cm{sup 2} which is specified by the requirement of 10 CFR 50.61 and the SMART has the preservation of reactor vessel integrity throughout the reactor lifetime. Also, it was shown that the result using DLC-23/CASK has conservatism of about 30% comparing with the result using DLC-185/BUGLE-96. 15 refs., 7 figs., 13 tabs. (Author)

  1. Irradiation's potential for preserving food

    International Nuclear Information System (INIS)

    Morrison, R.M.

    1986-01-01

    The first experimental studies on the use of ionizing radiation for the preservation of foods were published over thirty years ago (1, 2) . After a period of high expectations and perhaps exaggerated optimism a series of disappointments occurred in the late '60s .The first company specifically created to operate a food irradiation plant, Newfield Products Inc, ran into financial difficulties and had to close its potato irradiation facility in 1966. The irradiator, designed to process 15,000t of potatoes per month for inhibition of sprouting, was in operation during one season only. In 1968 the US Food an Drug Administration refused approval for radiation-sterilisation of ham and withdrew the approval it had granted in 1963 for irradiated bacon. An International Project on the Irradiation of Fruit and Fruit juices, created in 1965 at Seibersdorf, Austria, with the collaboration or 9 countries, ended with general disappointment after three years. The first commercial grain irradiator, built in the Turkish harbour town of Iskenderun by the International Atomic Energy Agency with funds from the United Nations Development Program, never received the necessary operating licence from the Turkish Government and had to be dismantled in 1968. The US Atomic Energy Commission terminated its financial support to all research programmes on food irradiation in 1970. For a number of years, little chance seemed to remain that the new process would ever be practically used. However, research and development work was continued in a number of laboratories all over the world, and it appears that the temporary setbacks now have been overcome. Growing quantities of irradiated foods are being marketed in several countries and indications are that irradiated foods will eventually be as generally accepted as are frozen, dried or heatsterilised foods

  2. Preservation of the Rotorua geysers

    International Nuclear Information System (INIS)

    Allia, R.G.; Lumb, T.

    1990-01-01

    This paper reports on the preservation of the Rotorua Geysers the geothermal activity at Rotorua, New Zealand, which has always been noted for its special cultural, tourist, and scientific values. A gradual increase in the drawoff of geothermal fluid through wells since the 1950s raised national concerns in the early 1980s when spring and geyser activity significantly declined. A government-funded monitoring program began in 1982 to establish the rate and cause of the decline in activity, as well as the magnitude of the drawoff. No new wells were permitted within 1.5 km of the geyser area. By late 1985, the monitoring program confirmed that drawdown of the geothermal field was linked to the drawoff by geothermal wells. It recommended that the drawoff could be reduced by 75% by well sharing and efficiency increases. The link between well discharges and the activity of thermal decline was disputed by the Rotorua Geothermal Users Association. By late 1986, the continuing decline in field pressure was considered to be serious, so the Government recommended compulsory closure of wells within 1.5 km of the geysers, and imposed a charging policy for geothermal usage elsewhere in Rotorua. The closures were battled in the High Court, and subsequently there was also considerable local resistance and publicity to the forced entry onto private land by authorities trying to cement up wells. The combination of enforced well closures, and what was considered by some to be punitive charges for geothermal usage, resulted in an 80% reduction in geothermal well discharges by late 1989. Some of hot spring activity has returned, and geyser activity is more intense. Recently, some residents have been concerned that cooled former thermal areas near houses may be heating up again, and that the well closures have also caused a dangerous build up in gas pressure near surface. This claim is presently being investigated

  3. Different techniques of vessel reconstruction during kidney transplantation

    Directory of Open Access Journals (Sweden)

    Tomić Aleksandar

    2015-01-01

    Full Text Available Background/Aim. Multiple renal arteries (MRAs represent a surgical challenge by the difficulty in performing anastomoses, bleeding and stenosis. MRAs should be preserved and special attention should be paid to accessory polar arteries. All renal arteries (RAs must be reconstructed and prepared for safe anastomosis. The paper decribed the different techniques of vessel reconstruction during kidney transplantation including important steps within recovery of organs, preparation and implantation. Methods. In a 16-year period (1996-2012 of kidney transplantation in the Military Medical Academy, Belgrade, a total of 310 living donors and 44 human cadaver kidney transplantations were performed, of which 28 (8% kidneys had two or more RAs. Results. All the transplanted kidneys had immediate function. We repaired 20 cases of donor kidneys with 2 arteries, 4 cases with three RAs, one case with 4 RAs, one case with 4 RAs and renal vein reconstruction, one case with 3 arteries and additional polytetrafluoroethylene (PTFE graft reconstruction, one case with transected renal artery and reconstruction with 5 cm long deceased donor external iliac artery. There were no major complications and graft failure. At a minimum of 1-year follow-up, all the patients showed normal renal function. Conclusion. Donor kidney transplantation on a contralateral side and “end-to-end” anastomosis of the renal artery to the internal iliac artery (IIA is our standard procedure with satisfactory results. Renal artery reconstruction and anastomosis with IIA is a safe and highly efficient procedure and kidneys with MRAs are not contraindicated for transplantation. A surgical team should be fully competent to remove cadaveric abdominal organs to avoid accidental injuries of organs vessels.

  4. Parenting paradox: parenting after infant loss.

    Science.gov (United States)

    Warland, Jane; O'Leary, Joann; McCutcheon, Helen; Williamson, Victoria

    2011-10-01

    to gain an in-depth understanding of the parenting experiences of bereaved parents in the years following an infant death. an exploratory qualitative study. semi-structured interview in the participants' homes. Data were collected over a five-month period in 2008 and analysed using thematic analysis. a purposive sample of 13 bereaved parents (10 mothers and three fathers) was used. Parents who had accessed the support services offered by two bereavement support agencies were recruited. Participants were asked to describe their experiences of raising their subsequent child. Interviews were conducted when the next born child was at least three years of age. the parents described a 'paradoxical' parenting style where they were trying to parent using two diametrically opposed unsustainable options. For example, they described trying to hold their subsequent child emotionally close but aloof at the same time. the results from this study indicate that the impact of a loss of an infant has far-reaching consequences on subsequent parenting. Support and early intervention at the time of the stillbirth and subsequent pregnancy are likely to be useful. However, further research is required to determine the extent to which early intervention can alter the tendency towards bereaved parents adopting a paradoxical parenting style. The impact of this style on mental health and the emotional health and well-being of the next born child/ren after perinatal loss should also be further examined. Copyright © 2010 Elsevier Ltd. All rights reserved.

  5. Vessel discoloration detection in malarial retinopathy

    Science.gov (United States)

    Agurto, C.; Nemeth, S.; Barriga, S.; Soliz, P.; MacCormick, I.; Taylor, T.; Harding, S.; Lewallen, S.; Joshi, V.

    2016-03-01

    Cerebral malaria (CM) is a life-threatening clinical syndrome associated with malarial infection. It affects approximately 200 million people, mostly sub-Saharan African children under five years of age. Malarial retinopathy (MR) is a condition in which lesions such as whitening and vessel discoloration that are highly specific to CM appear in the retina. Other unrelated diseases can present with symptoms similar to CM, therefore the exact nature of the clinical symptoms must be ascertained in order to avoid misdiagnosis, which can lead to inappropriate treatment and, potentially, death. In this paper we outline the first system to detect the presence of discolored vessels associated with MR as a means to improve the CM diagnosis. We modified and improved our previous vessel segmentation algorithm by incorporating the `a' channel of the CIELab color space and noise reduction. We then divided the segmented vasculature into vessel segments and extracted features at the wall and in the centerline of the segment. Finally, we used a regression classifier to sort the segments into discolored and not-discolored vessel classes. By counting the abnormal vessel segments in each image, we were able to divide the analyzed images into two groups: normal and presence of vessel discoloration due to MR. We achieved an accuracy of 85% with sensitivity of 94% and specificity of 67%. In clinical practice, this algorithm would be combined with other MR retinal pathology detection algorithms. Therefore, a high specificity can be achieved. By choosing a different operating point in the ROC curve, our system achieved sensitivity of 67% with specificity of 100%.

  6. Pressurized wet digestion in open vessels (T11)

    International Nuclear Information System (INIS)

    Kettisch, P.; Maichin, P.; Zischka, M.; Knapp, G.

    2002-01-01

    Full text: Pressurized wet digestion in closed vessels, microwave assisted or with conventional conductive heating, is the most important sample preparation technique for digestion or leaching procedures in element analysis. In comparison to open vessel digestion closed vessel digestion methods have many advantages, but there is one disadvantage - complex and expensive vessel designs. A new technique - pressurized wet digestion in open vessels - combine the advantages of closed vessel sample digestion with the application of simple and cheap open vessels made of quartz or PFA. The vessels are placed in a high pressure Asher HPA, which is adapted with a Teflon liner and filled partly with water. The analytical results with 30 ml quartz vessels, 22 ml PFA vessels and 1.5 ml PIA auto sampler cups will be shown. In principle every dimensions of vessels can be used. The vessels are loaded with sample material (max. 1.5 g with quartz vessels, max. 0.5 g with PFA vessels and 50 mg with auto sampler cups) and digestion reagent. Afterwards the vessels are simply covered with PTFE stoppers and not sealed. The vessels are transferred into a special adapted HPA and digested at temperatures up to 270 o C. The digestion time is 90 min. and cooling down to room temperature 30 min. The analytical results of CRM's are within the certified values and no cross contamination and losses of volatile elements could be observed. (author)

  7. 46 CFR 15.405 - Familiarity with vessel characteristics.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false Familiarity with vessel characteristics. 15.405 Section... MANNING REQUIREMENTS Manning Requirements; All Vessels § 15.405 Familiarity with vessel characteristics. Each credentialed individual must become familiar with the relevant characteristics of the vessel on...

  8. A Parent-to-Parent Program in Taiwan

    Science.gov (United States)

    Liu, Kae

    2018-01-01

    Parent-to-parent programs provide emotional and informational support to parents of children with special needs by matching trained and experienced parents with parents needing support. This study examined the implementation and effects of a Parent-to-Parent Program in Taiwan that supported 3 families of youngsters with special needs. Based on the…

  9. Maternal Personality, Parenting Cognitions and Parenting Practices

    Science.gov (United States)

    Bornstein, Marc H.; Hahn, Chun-Shin; Haynes, O. Maurice

    2011-01-01

    A community sample of 262 European American mothers of firstborn 20-month-olds completed a personality inventory and measures of parenting cognitions (knowledge, self-perceptions, and reports about behavior) and was observed in interaction with their children from which measures of parenting practices (language, sensitivity, affection, and play) were independently coded. Factor analyses of the personality inventory replicated extraction of the Five-Factor model of personality (Openness, Neuroticism, Extraversion, Agreeableness, and Conscientiousness). Controlling for sociodemographic characteristics, the five personality factors qua variables and in patterns qua clusters related differently to diverse parenting cognitions and practices, supporting the multidimensional, modular, and specific nature of parenting. Maternal personality in the normal range, a theoretically important but empirically neglected factor in everyday parenting, has meaning in studies of parenting, child development, and family process. PMID:21443335

  10. Reactor vessel supported by flexure member

    International Nuclear Information System (INIS)

    Crawford, J.D.; Pankow, B.

    1977-01-01

    According to the present invention there is provided an improved arrangement for supporting a reactor vessel within a containment structure against static and dynamic vertical loadings capable of being imposed as a result of a serious accident as well as during periods of normal plant operation. The support arrangement of the invention is, at the same time, capable of accommodating radial displacements that normally occur between the reactor vessel and the containment structure due to operational transients. The arrangement comprises a plurality of vertical columns connected between the reactor vessel and a support base within the containment structure. The columns are designed to accommodate relative displacements between the vessel and the containment structure by flexing. This eliminates the need for relative sliding movements and thus enables the columns to be securely fixed to the vessel. This elimination of a provision for relative sliding movements avoids the spaces or gaps between the retention members and the retained elements as occurred in prior art arrangements and, concomitantly, the danger of establishing impact forces on the retention members in the event of an accident is reduced. (author)

  11. Baking results of KSTAR vacuum vessel

    Energy Technology Data Exchange (ETDEWEB)

    Kim, S. T.; Kim, Y. J.; Kim, K. M.; Im, D. S.; Joung, N. Y.; Yang, H. L.; Kim, Y. S.; Kwon, M. [National Fusion Research Institute, Daejeon (Korea, Republic of)

    2009-05-15

    The Korea Superconducting Tokamak Advanced Research (KSTAR) is an advanced superconducting tokamak designed to establish a scientific and technological basis for an attractive fusion reactor. The fusion energy in the tokamak device is released through fusion reactions of light atoms such as deuterium or helium in hot plasma state, of which temperature reaches several hundreds of millions Celsius. The high temperature plasma is created in the vacuum vessel that provides ultra high vacuum status. Accordingly, it is most important for the vacuum condition to keep clean not only inner space but also surface of the vacuum vessel to make high quality plasma. There are two methods planned to clean the wall surface of the KSTAR vacuum vessel. One is surface baking and the other is glow discharge cleaning (GDC). To bake the vacuum vessel, De-Ionized (DI) water is heated to 130 .deg. C and circulated in the passage between double walls of the vacuum vessel (VV) in order to bake the surface. The GDC operation uses hydrogen and inert gas discharges. In this paper, general configuration and brief introduction of the baking result will be reported.

  12. Guidelines for pressure vessel safety assessment

    Science.gov (United States)

    Yukawa, S.

    1990-04-01

    A technical overview and information on metallic pressure containment vessels and tanks is given. The intent is to provide Occupational Safety and Health Administration (OSHA) personnel and other persons with information to assist in the evaluation of the safety of operating pressure vessels and low pressure storage tanks. The scope is limited to general industrial application vessels and tanks constructed of carbon or low alloy steels and used at temperatures between -75 and 315 C (-100 and 600 F). Information on design codes, materials, fabrication processes, inspection and testing applicable to the vessels and tanks are presented. The majority of the vessels and tanks are made to the rules and requirements of ASME Code Section VIII or API Standard 620. The causes of deterioration and damage in operation are described and methods and capabilities of detecting serious damage and cracking are discussed. Guidelines and recommendations formulated by various groups to inspect for the damages being found and to mitigate the causes and effects of the problems are presented.

  13. Cholinergic innervation of human mesenteric lymphatic vessels.

    Science.gov (United States)

    D'Andrea, V; Bianchi, E; Taurone, S; Mignini, F; Cavallotti, C; Artico, M

    2013-11-01

    The cholinergic neurotransmission within the human mesenteric lymphatic vessels has been poorly studied. Therefore, our aim is to analyse the cholinergic nerve fibres of lymphatic vessels using the traditional enzymatic techniques of staining, plus the biochemical modifications of acetylcholinesterase (AChE) activity. Specimens obtained from human mesenteric lymphatic vessels were subjected to the following experimental procedures: 1) drawing, cutting and staining of tissues; 2) staining of total nerve fibres; 3) enzymatic staining of cholinergic nerve fibres; 4) homogenisation of tissues; 5) biochemical amount of proteins; 6) biochemical amount of AChE activity; 6) quantitative analysis of images; 7) statistical analysis of data. The mesenteric lymphatic vessels show many AChE positive nerve fibres around their wall with an almost plexiform distribution. The incubation time was performed at 1 h (partial activity) and 6 h (total activity). Moreover, biochemical dosage of the same enzymatic activity confirms the results obtained with morphological methods. The homogenates of the studied tissues contain strong AChE activity. In our study, the lymphatic vessels appeared to contain few cholinergic nerve fibres. Therefore, it is expected that perivascular nerve stimulation stimulates cholinergic nerves innervating the mesenteric arteries to release the neurotransmitter AChE, which activates muscarinic or nicotinic receptors to modulate adrenergic neurotransmission. These results strongly suggest, that perivascular cholinergic nerves have little or no effect on the adrenergic nerve function in mesenteric arteries. The cholinergic nerves innervating mesenteric arteries do not mediate direct vascular responses.

  14. Baking results of KSTAR vacuum vessel

    International Nuclear Information System (INIS)

    Kim, S. T.; Kim, Y. J.; Kim, K. M.; Im, D. S.; Joung, N. Y.; Yang, H. L.; Kim, Y. S.; Kwon, M.

    2009-01-01

    The Korea Superconducting Tokamak Advanced Research (KSTAR) is an advanced superconducting tokamak designed to establish a scientific and technological basis for an attractive fusion reactor. The fusion energy in the tokamak device is released through fusion reactions of light atoms such as deuterium or helium in hot plasma state, of which temperature reaches several hundreds of millions Celsius. The high temperature plasma is created in the vacuum vessel that provides ultra high vacuum status. Accordingly, it is most important for the vacuum condition to keep clean not only inner space but also surface of the vacuum vessel to make high quality plasma. There are two methods planned to clean the wall surface of the KSTAR vacuum vessel. One is surface baking and the other is glow discharge cleaning (GDC). To bake the vacuum vessel, De-Ionized (DI) water is heated to 130 .deg. C and circulated in the passage between double walls of the vacuum vessel (VV) in order to bake the surface. The GDC operation uses hydrogen and inert gas discharges. In this paper, general configuration and brief introduction of the baking result will be reported

  15. Head spray nozzle in reactor pressure vessel

    International Nuclear Information System (INIS)

    Hatano, Shun-ichi.

    1990-01-01

    In a reactor pressure vessel of a BWR type reactor, a head spray nozzle is used for cooling the head of the pressure vessel and, in view of the thermal stresses, it is desirable that cooling is applied as uniformly as possible. A conventional head spray is constituted by combining full cone type nozzles. Since the sprayed water is flown down upon water spraying and the sprayed water in the vertical direction is overlapped, the flow rate distribution has a high sharpness to form a shape as having a maximum value near the center and it is difficult to obtain a uniform flow rate distribution in the circumferential direction. Then, in the present invention, flat nozzles each having a spray water cross section of laterally long shape, having less sharpness in the circumferential distribution upon spraying water to the inner wall of the pressure vessel and having a wide angle of water spray are combined, to make the flow rate distribution of spray water uniform in the inner wall of the pressure vessel. Accordingly, the pressure vessel can be cooled uniformly and thermal stresses upon cooling can be decreased. (N.H.)

  16. Trends in Tissue Engineering for Blood Vessels

    Directory of Open Access Journals (Sweden)

    Judee Grace Nemeno-Guanzon

    2012-01-01

    Full Text Available Over the years, cardiovascular diseases continue to increase and affect not only human health but also the economic stability worldwide. The advancement in tissue engineering is contributing a lot in dealing with this immediate need of alleviating human health. Blood vessel diseases are considered as major cardiovascular health problems. Although blood vessel transplantation is the most convenient treatment, it has been delimited due to scarcity of donors and the patient’s conditions. However, tissue-engineered blood vessels are promising alternatives as mode of treatment for blood vessel defects. The purpose of this paper is to show the importance of the advancement on biofabrication technology for treatment of soft tissue defects particularly for vascular tissues. This will also provide an overview and update on the current status of tissue reconstruction especially from autologous stem cells, scaffolds, and scaffold-free cellular transplantable constructs. The discussion of this paper will be focused on the historical view of cardiovascular tissue engineering and stem cell biology. The representative studies featured in this paper are limited within the last decade in order to trace the trend and evolution of techniques for blood vessel tissue engineering.

  17. Unsupervised Retinal Vessel Segmentation Using Combined Filters.

    Directory of Open Access Journals (Sweden)

    Wendeson S Oliveira

    Full Text Available Image segmentation of retinal blood vessels is a process that can help to predict and diagnose cardiovascular related diseases, such as hypertension and diabetes, which are known to affect the retinal blood vessels' appearance. This work proposes an unsupervised method for the segmentation of retinal vessels images using a combined matched filter, Frangi's filter and Gabor Wavelet filter to enhance the images. The combination of these three filters in order to improve the segmentation is the main motivation of this work. We investigate two approaches to perform the filter combination: weighted mean and median ranking. Segmentation methods are tested after the vessel enhancement. Enhanced images with median ranking are segmented using a simple threshold criterion. Two segmentation procedures are applied when considering enhanced retinal images using the weighted mean approach. The first method is based on deformable models and the second uses fuzzy C-means for the image segmentation. The procedure is evaluated using two public image databases, Drive and Stare. The experimental results demonstrate that the proposed methods perform well for vessel segmentation in comparison with state-of-the-art methods.

  18. TMI-2 Vessel Investigation Project Metallurgical Program

    International Nuclear Information System (INIS)

    Diercks, D.R.; Neimark, L.A.

    1990-01-01

    The TMI-2 [Three Mile Island unit 2] Vessel Investigation Project Metallurgical Program at Argonne National Laboratory is a part of the international TMI-2 Vessel Investigation Project being conducted jointly by the U.S. Nuclear Regulatory Commission and the Organization for Economic Co-operation and Development (OECD). The overall project consists of three phases, namely (1) recovery of material samples from the lower head of the TMI-2 reactor, (2) examination and analysis of the lower head samples and the preparation and testing of archive material subjected to a similar thermal history, and (3) procurement, examination, and analysis of companion core material located adjacent to or near the lower head material. The specific objectives of the ANL Metallurgical Program, which accounts for a major portion of Phase 2, are to prepare metallographic and mechanical test specimen blanks from the TMI-2 lower head material, prepare similar test specimen blanks from suitable archive material subjected to the appropriate thermal processing, determine the mechanical properties of the lower vessel head and archive materials under the conditions of the core-melt accident, and assess the lower head integrity and margin-to-failure during the accident. The ANL work consists of three tasks: (1) archive materials program, (2) fabrication of metallurgical and mechanical test specimens from the TMI-2 pressure vessel samples, and (3) mechanical property characterization of TMI-2 lower pressure vessel head and archive material

  19. Foundamental characteristics of layered pressure vessel

    International Nuclear Information System (INIS)

    Moriwaki, Yoshikazu; Fugino, Masayuki; Shimizu, Yasuhiro; Nakamura, Takeshi

    1978-01-01

    Pressure vessels become larger and the working pressure become higher with the remarkable development of petroleum, chemical, thermal power generation and atomic energy industries. Multi-layered pressure vessels can be manufactured cheaply without large installations, and large wall thickness can be made, therefore they are suitable for large pressure vessels. The stress and deformation behaviors of such vessels are very complex because of the effect of frictional force working between layers. In this study, the phenomena arising in multiple layers and the difference as compared with single wall were studied fundamentally as one step for analyzing multi-layered pressure vessels as a whole. Finite element technique was employed as the analyzing method, and the behavior of multiple layers was analyzed, regarding it as multiple contact problem. The behavior of multiple layers seems to appear conspicuously in case of bending load, therefore the basic characteristics regarding bending were examined. The evaluation of interfacial stiffness was carried out by experiment. The computer program for analyzing multiple contact problem was developed. In order to examine the validity of the program, comparison with the analytical solution heretofore and the result of calculation by finite element technique was carried out. Moreover, the experimental proof with multi-layered models was made. The frictional force between layers hardly contributes to the stiffness. (Kako, I.)

  20. NMR blood vessel imaging method and apparatus

    International Nuclear Information System (INIS)

    Riederer, S.J.

    1988-01-01

    A high speed method of forming computed images of blood vessels based on measurements of characteristics of a body is described comprising the steps of: subjecting a predetermined body area containing blood vessels of interest to, successively, applications of a short repetition time (TR) NMR pulse sequence during the period of high blood velocity and then to corresponding applications during the period of low blood velocity for successive heart beat cycles; weighting the collected imaging data from each application of the NMR pulse sequence according to whether the data was acquired during the period of high blood velocity or a period of low blood velocity of the corresponding heart beat cycle; accumulating weighted imaging data from a plurality of NMR pulse sequences corresponding to high blood velocity periods and from a plurality of NMR pulse sequences corresponding to low blood velocity periods; subtracting the weighted imaging data corresponding to each specific phase encoding acquired during the high blood velocity periods from the weighted imaging data for the same phase encoding corresponding to low blood velocity periods in order to compute blood vessel imaging data; and forming an image of the blood vessels of interest from the blood vessel imaging data