WorldWideScience

Sample records for parent processing element

  1. The Surprise Element: How Allaying Parents' Misconceptions Improves a Teacher's Communicative Process

    Science.gov (United States)

    Kumar, Rashmi

    2010-01-01

    Challenged by parents' misconceptions about the role of cooperative learning activities in developing their gifted children, a teacher began to mentor the parents. The act of mentoring those parents resulted in the teacher's longer-term professional development: specifically, creating a process of seeking structured feedback from parents and…

  2. Elemental, isotopic, and structural changes in Tagish Lake insoluble organic matter produced by parent body processes

    Science.gov (United States)

    Alexander, C. M. O'd.; Cody, G. D.; Kebukawa, Y.; Bowden, R.; Fogel, M. L.; Kilcoyne, A. L. D.; Nittler, L. R.; Herd, C. D. K.

    2014-04-01

    Here, we present the results of a multitechnique study of the bulk properties of insoluble organic material (IOM) from the Tagish Lake meteorite, including four lithologies that have undergone different degrees of aqueous alteration. The IOM C contents of all four lithologies are very uniform and comprise about half the bulk C and N contents of the lithologies. However, the bulk IOM elemental and isotopic compositions vary significantly. In particular, there is a correlated decrease in bulk IOM H/C ratios and δD values with increasing degree of alteration—the IOM in the least altered lithology is intermediate between CM and CR IOM, while that in the more altered lithologies resembles the very aromatic IOM in mildly metamorphosed CV and CO chondrites, and heated CMs. Nuclear magnetic resonance (NMR) spectroscopy, C X-ray absorption near-edge (XANES), and Fourier transform infrared (FTIR) spectroscopy confirm and quantitate this transformation from CR-like, relatively aliphatic IOM functional group chemistry to a highly aromatic one. The transformation is almost certainly thermally driven, and probably occurred under hydrothermal conditions. The lack of a paramagnetic shift in 13C NMR spectra and 1s-σ* exciton in the C-XANES spectra, both typically seen in metamorphosed chondrites, shows that the temperatures were lower and/or the timescales were shorter than experienced by even the least metamorphosed type 3 chondrites. Two endmember models were considered to quantitatively account for the changes in IOM functional group chemistry, but the one in which the transformations involved quantitative conversion of aliphatic material to aromatic material was the more successful. It seems likely that similar processes were involved in producing the diversity of IOM compositions and functional group chemistries among CR, CM, and CI chondrites. If correct, CRs experienced the lowest temperatures, while CM and CI chondrites experienced similar more elevated temperatures

  3. Reading Processes and Parenting Styles.

    Science.gov (United States)

    Carreteiro, Rui Manuel; Justo, João Manuel; Figueira, Ana Paula

    2016-08-01

    Home literacy environment explains between 12 and 18.5 % of the variance of children's language skills. Although most authors agree that children whose parents encourage them to read tend to develop better and earlier reading skills, some authors consider that the impact of family environment in reading skills is overvalued. Probably, other variables of parent-child relationship, like parenting styles, might be relevant for this field. Nevertheless, no previous studies on the effect of parenting styles in literacy have been found. To analyze the role of parenting styles in the reading processes of children. Children's perceptions of parenting styles contribute significantly to the explanation of statistical variance of children's reading processes. 110 children (67 boys and 43 girls), aged between 7 and 11 years (M [Formula: see text] 9.22 and SD [Formula: see text] 1.14) from Portuguese schools answered to a socio-demographic questionnaire. To assess reading processes it was administered the Portuguese adaptation (Figueira et al. in press) of Bateria de Avaliação dos Processos Leitores-Revista (PROLEC-R). To assess the parenting styles Egna Minnen av Barndoms Uppfostran-parents (EMBU-P) and EMBU-C (children version) were administered. According to multiple hierarchical linear regressions, individual factors contribute to explain all reading tests of PROLEC-R, while family factors contribute to explain most of these tests. Regarding parenting styles, results evidence the explanatory power about grammatical structures, sentence comprehension and listening. Parenting styles have an important role in the explanation of higher reading processes (syntactic and semantic) but not in lexical processes, focused by main theories concerning dyslexia.

  4. Cognitive Processing Hardware Elements

    National Research Council Canada - National Science Library

    Widrow, Bernard; Eliashberg, Victor; Kamenetsky, Max

    2005-01-01

    The purpose of this research is to identify and develop cognitive information processing systems and algorithms that can be implemented with novel architectures and devices with the goal of achieving...

  5. Reading Processes and Parenting Styles

    Science.gov (United States)

    Carreteiro, Rui Manuel; Justo, João Manuel; Figueira, Ana Paula

    2016-01-01

    Home literacy environment explains between 12 and 18.5% of the variance of children's language skills. Although most authors agree that children whose parents encourage them to read tend to develop better and earlier reading skills, some authors consider that the impact of family environment in reading skills is overvalued. Probably, other…

  6. Auditory Processing Disorder (For Parents)

    Science.gov (United States)

    ... role. Auditory cohesion problems: This is when higher-level listening tasks are difficult. Auditory cohesion skills — drawing inferences from conversations, understanding riddles, or comprehending verbal math problems — require heightened auditory processing and language levels. ...

  7. Divorce process variables and the co-parental relationship and parental role fulfillment of divorced parents.

    Science.gov (United States)

    Baum, Nehami

    2003-01-01

    This study examines the association between two sets of divorce process variables, a) initiation of and responsibility for the divorce and b) difficulty and duration of the legal procedure, and divorced spouses' co-parental relationship and parental functioning. In a random sample of 50 former couples, in Israel, findings showed that the longer and more conflictual the legal proceedings, the worse the coparental relationship in the view of both parents. They also showed that mothers' parental functioning was not significantly associated with any of the divorce variables, but fathers' were. The more responsibility the father assumed for the divorce and the more he viewed himself as the initiator, the more he fulfilled his parental functions. The findings are interpreted in the discussion, and their theoretical and practical implications considered.

  8. Elements of random walk and diffusion processes

    CERN Document Server

    Ibe, Oliver C

    2013-01-01

    Presents an important and unique introduction to random walk theory Random walk is a stochastic process that has proven to be a useful model in understanding discrete-state discrete-time processes across a wide spectrum of scientific disciplines. Elements of Random Walk and Diffusion Processes provides an interdisciplinary approach by including numerous practical examples and exercises with real-world applications in operations research, economics, engineering, and physics. Featuring an introduction to powerful and general techniques that are used in the application of physical and dynamic

  9. Finite Element Method in Machining Processes

    CERN Document Server

    Markopoulos, Angelos P

    2013-01-01

    Finite Element Method in Machining Processes provides a concise study on the way the Finite Element Method (FEM) is used in the case of manufacturing processes, primarily in machining. The basics of this kind of modeling are detailed to create a reference that will provide guidelines for those who start to study this method now, but also for scientists already involved in FEM and want to expand their research. A discussion on FEM, formulations and techniques currently in use is followed up by machining case studies. Orthogonal cutting, oblique cutting, 3D simulations for turning and milling, grinding, and state-of-the-art topics such as high speed machining and micromachining are explained with relevant examples. This is all supported by a literature review and a reference list for further study. As FEM is a key method for researchers in the manufacturing and especially in the machining sector, Finite Element Method in Machining Processes is a key reference for students studying manufacturing processes but al...

  10. Pyrometallurgical processes for recovery of actinide elements

    International Nuclear Information System (INIS)

    Battles, J.E.; Laidler, J.J.; McPheeters, C.C.; Miller, W.E.

    1994-01-01

    A metallic fuel alloy, nominally U-20-Pu-lOZr, is the key element of the Integral Fast Reactor (IFR) fuel cycle. Metallic fuel permits the use of an innovative, simple pyrometallurgical process, known as pyroprocessing, (the subject of this report), which features fused salt electrorefining of the spent fuel. Electrorefining separates the actinide elements from fission products, without producing a separate stream of plutonium. The plutonium-bearing product is contaminated with higher actinides and with a minor amount of rare earth fission products, making it diversion resistant while still suitable as a fuel material in the fast spectrum of the IFR core. The engineering-scale demonstration of this process will be conducted in the refurbished EBR-II Fuel Cycle Facility, which has entered the start-up phase. An additional pyrometallurgical process is under development for extracting transuranic (TRU) elements from Light Water Reactor (LWR) spent fuel in a form suitable for use as a feed to the IFR fuel cycle. Four candidate extraction processes have been investigated and shown to be chemically feasible. The main steps in each process are oxide reduction with calcium or lithium, regeneration of the reductant and recycle of the salt, and separation of the TRU product from the bulk uranium. Two processes, referred to as the lithium and salt transport (calcium reductant) processes, have been selected for engineering-scale demonstration, which is expected to start in late 1993. An integral part of pyroprocessing development is the treatment and packaging of high-level waste materials arising from the operations, along with the qualification of these waste forms for disposal in a geologic repository

  11. Pyrometallurgical processes for recovery of actinide elements

    Energy Technology Data Exchange (ETDEWEB)

    Battles, J.E.; Laidler, J.J.; McPheeters, C.C.; Miller, W.E.

    1994-01-01

    A metallic fuel alloy, nominally U-20-Pu-lOZr, is the key element of the Integral Fast Reactor (IFR) fuel cycle. Metallic fuel permits the use of an innovative, simple pyrometallurgical process, known as pyroprocessing, (the subject of this report), which features fused salt electrorefining of the spent fuel. Electrorefining separates the actinide elements from fission products, without producing a separate stream of plutonium. The plutonium-bearing product is contaminated with higher actinides and with a minor amount of rare earth fission products, making it diversion resistant while still suitable as a fuel material in the fast spectrum of the IFR core. The engineering-scale demonstration of this process will be conducted in the refurbished EBR-II Fuel Cycle Facility, which has entered the start-up phase. An additional pyrometallurgical process is under development for extracting transuranic (TRU) elements from Light Water Reactor (LWR) spent fuel in a form suitable for use as a feed to the IFR fuel cycle. Four candidate extraction processes have been investigated and shown to be chemically feasible. The main steps in each process are oxide reduction with calcium or lithium, regeneration of the reductant and recycle of the salt, and separation of the TRU product from the bulk uranium. Two processes, referred to as the lithium and salt transport (calcium reductant) processes, have been selected for engineering-scale demonstration, which is expected to start in late 1993. An integral part of pyroprocessing development is the treatment and packaging of high-level waste materials arising from the operations, along with the qualification of these waste forms for disposal in a geologic repository.

  12. Financial Stress, Parental Depressive Symptoms, Parenting Practices, and Children's Externalizing Problem Behaviors: Underlying Processes

    Science.gov (United States)

    Lee, Chih-Yuan Steven; Lee, Jaerim; August, Gerald J.

    2011-01-01

    This study examined the relationships among financial stress encountered by families, parents' social support, parental depressive symptoms, parenting practices, and children's externalizing problem behaviors to advance our understanding of the processes by which family financial stress is associated with children's problem behaviors. We also…

  13. Parents and the educational process of art education

    OpenAIRE

    Bobinac, Barbara

    2016-01-01

    In this Thesis I have researched the parents and the educational process of art education. I wondered how parents encourage their children in artistic creation. The research was based on 37 parents of 3rd graders. Required information was obtained via questionnaires. I have found that parents support children in artistic activities outside school hours, often providing them with art accessories and materials, with the resulting products being exhibited around their homes. Sometimes th...

  14. Parenting an overweight or obese child: a process of ambivalence.

    Science.gov (United States)

    Haugstvedt, Karen Therese Sulheim; Graff-Iversen, Sidsel; Bechensteen, Brit; Hallberg, Ulrika

    2011-03-01

    Childhood overweight represents a health problem, and research points towards parents as key players. The aim of this study was to deepen the knowledge of how parents of children who are overweight or obese experience their parenthood. Focus group discussions with 17 parents were analysed according to the qualitative method of modified grounded theory. The results expressed the parents' ambivalence between preventing the child's overweight and not negatively affecting the child's self-esteem. The most important issue seemed to be their concern about the child's construction of self-understanding and experiences in interaction with the environment. The parents had become uncertain of their responsibility, priorities and how to act. In conclusion, parenting a child with weight issues could be a process of loving the child the way he/she is while still wanting changes for improved health, resulting in ambivalence. In addition to traditional advice about lifestyle, many parents seem to need counselling assistance with respect to their parental role.

  15. Elements of Parental Choice: The Evolution of Parental Preferences in Relation to In-Law Selection

    Directory of Open Access Journals (Sweden)

    Menelaos Apostolou

    2007-01-01

    Full Text Available With the exception of modern post-industrial societies, parents have primarily been in control of the mating decisions of their offspring. The selection of in-laws has important fitness consequences for parents. It is hypothesized, therefore, that parents have evolved specific preferences that enable them to select in-laws that will maximize their inclusive fitness. To test this hypothesis, data from 297 parents were collected. It is found that parents place differential emphasis on different in-law traits and that their preferences vary according to the sex of the in-law. In addition, parents are in agreement when they are selecting an in-law and their preferences are not contingent upon their sex.

  16. Religiosity and parenting: recent directions in process-oriented research.

    Science.gov (United States)

    Goeke-Morey, Marcie C; Cummings, E Mark

    2017-06-01

    Most faith traditions, in principle, promote family life and positive parent-child relationships. In recent years, research has moved beyond questions of whether religion supports positive parenting towards addressing more nuanced process-oriented questions, including how, why, and when religion is linked with adaptive or maladaptive parenting. Relations between religion and multiple specific parenting behaviors (e.g., involvement, warmth, authoritative parenting, communication) are identified, including contexts for when and why relations between religion and parenting are adaptive or maladaptive. A next step for research is the development and testing of theoretical models to more comprehensively account for process relations between religion and parenting. Copyright © 2017 Elsevier Ltd. All rights reserved.

  17. Application of finite-element-methods in food processing

    DEFF Research Database (Denmark)

    Risum, Jørgen

    2004-01-01

    Presentation of the possible use of finite-element-methods in food processing. Examples from diffusion studies are given.......Presentation of the possible use of finite-element-methods in food processing. Examples from diffusion studies are given....

  18. Finite Element Simulation of Blanking Process

    Directory of Open Access Journals (Sweden)

    Afzal Ahmed

    2012-10-01

    Full Text Available ABSTRACT: The blanking process can be simulated by ABAQUS v 6.4 to select punch, die and press and ascertain punch wear and bur height. The experimental and the simulation results agree well with rising punch force up to the point of creation of crack. For a 2mm mild steel sheet, the simulation shows that for the punch force of 240 kN, the crack starts at 30% punch penetration depth and punch force suddenly drops to a value of 70 kN and remains steady till the blanking is complete. Comparing simulation and experimental results for a 3mm mild steel sheet, results agree well in the elastic range with the punch force rising up to point of crack creation. However, a discrepancy appears in punch force which increases with punch penetration. At 32% depth of penetration, the discrepancy is 12 % which increases to 60 % at punch penetration of 42%. Punch force for experimental and simulation results remains about 90kN beyond punch penetration of 62%. Also, increase of the thickness of sheet results in reduced crack height and improved quality of blank.ABSTRAK: Proses pengosongan boleh disimulasikan oleh ABAQUS versi 6.4 untuk memilih tebuk, alat dan tekan; dan menentukan haus tebuk dan ketinggian duri. Keputusan ujikaji dan simulasi adalah serupa dengan kenaikan daya tebuk hingga titik retakan diperolehi. Bagi kepingan keluli ringan 2mm simulasi menunjukkan bahawa untuk tenaga tebukan sebanyak 240 kN, retak bermula pada 30% kedalaman penembusan 30% tebukan dan daya tebuk tiba-tiba jatuh kepada 70 kN dan jumplah ini kekal sehingga proses pengosongan selesai.  Apabila hasil simulasi dan eksperimen dibandingkan, keputusan experimen untuk keluli lembut 3mm, bersetuju dengan baik dalam julat anjal dan daya tebukan meningkat sehingga titik penciptaan retak diperolehi. Walau bagaimanapun percanggahan muncul apabila daya tebukan meningkat dengan daya penembusan. Pada kedalaman penembusan 32% percanggahan adalah 12% dan nilai ini meningkat kepada 60% apabila

  19. The Elements of Business Process Change

    African Journals Online (AJOL)

    user

    organization and employees' empowerment recommended in the BPC literature. ... failure, selecting policy directions, and designing effective and efficient program. ... performance management, and business process change that is considered .... the new processes result in dramatic improvements including reduced work.

  20. Brazing process in nuclear fuel element fabrication

    International Nuclear Information System (INIS)

    Katam, K.; Sudarsono

    1982-01-01

    The purpose of the brazing process is to join the spacers and pads of fuel pins, so that the process is meant as a soldering technique and not only as a hardening or reinforcing process such as in common brazing purposes. There are some preliminary processes before executing the brazing process such as: materials preparation, sand blasting, brazing metal coating tack welding the spacers and pads on the fuel cladding. The metal brazing used is beryllium in strip form which will be evaporated in vacuum condition to coat the spacers and pads. The beryllium vapor and dust is very hazardous to the workers, so all the line process of brazing needs specials safety protection and equipment to protect the workers and the processing area. Coating process temperature is 2470 deg C with a vacuum pressure of 10 -5 mmHg. Brazing process temperature process is 1060 deg C with a vacuum pressure of 10 -6 mmHg. The brazing process with beryllium coating probably will give metallurgical structural change in the fuel cladding metal at the locations of spacers and pads. The quality of brazing is highly influenced by and is depending on the chemical composition of the metal and the brazing metal, materials preparations, temperature, vacuum pressure, time of coating and brazing process. The quality control of brazing could be performed with methods of visuality geometry, radiography and metallography. (author)

  1. Preschool Children's Exposure to Story Grammar Elements during Parent-Child Book Reading

    Science.gov (United States)

    Breit-Smith, Allison; van Kleeck, Anne; Prendeville, Jo-Anne; Pan, Wei

    2017-01-01

    Twenty-three preschool-age children, 3;6 (years; months) to 4;1, were videotaped separately with their mothers and fathers while each mother and father read a different unfamiliar storybook to them. The text from the unfamiliar storybooks was parsed and coded into story grammar elements and all parental extratextual utterances were transcribed and…

  2. The Elements of Business Process Change

    African Journals Online (AJOL)

    user

    magnitude of the BPC effort, and its interruption to operations. Based on ... innovation, business process redesign and business process management ..... Table 5. Organization performance ( Organizational outcome and Impact). Mean SD. 1. Increased operational efficiency(decreased cycle time, inventory). 2.3 .97. 2.

  3. Trace elements as quantitative probes of differentiation processes in planetary interiors

    International Nuclear Information System (INIS)

    Drake, M.J.

    1980-01-01

    Abundances of trace elements in extrusive igneous rocks may be used as petrological and geochemical probes of the source regions of the rocks if differentiation processes, partition coefficients, phase equilibria, and initial concentrations in the source region are known. The characteristic trace element signature that each mineral in the source region imparts on the magma forms the conceptual basis for trace element modeling. The task of the trace element geochemist is to solve mathematically the inverse problem. Given trace element abundances in a magma, what is the ode of its source region. The most successful modeling has been performed for small planetary bodies which underwent relatively simple igneous differentiation events. An example is the eucrite parent body, a planet which produced basals at approx. =4.6 Gy. and has been quiescent ever since. This simple differentiation history permits the calculation of its bulk composition (a feldspathic peridotite) and has led to the tentative identification of asteroid 4 Westa as the eucrite parent body. The differentiation of iron meteorite groups in parent body cores is amenable to similar treatment. The 'anomalous' behavior of Cr, suggests that IIIA, B irons and main group pallasites equilibrated with troilite, spinel, ferromagnesian silicates, or some combination thereof. The moon has undergone more complex differentiation, and quantitative geochemical modeling is correspondingly more difficult. Nevertheless, modeling the two-stage evolution of mare basals raises the possibility that the primordial moon did not have chondritic relative abundances of such refractory elements as Ca, Al, U, and the rare-earth elements. The nonchondritic element ratios are characteristic of planetary, not nebular, fractionation processes and are consistent with the derivation of the moon from a precursor planet, possibly the earth

  4. Resurrecting the chimera: Progressions in parenting and peer processes.

    Science.gov (United States)

    Forgatch, Marion S; Snyder, James J; Patterson, Gerald R; Pauldine, Michael R; Chaw, Yvonne; Elish, Katie; Harris, Jasmine B; Richardson, Eric B

    2016-08-01

    This report uses 6-year outcomes of the Oregon Divorce Study to examine the processes by which parenting practices affect deviant peer association during two developmental stages: early to middle childhood and late childhood to early adolescence. The participants were 238 newly divorced mothers and their 5- to 8-year-old sons who were randomly assigned to Parent Management Training-Oregon Model (PMTO®) or to a no-treatment control group. Parenting practices, child delinquent behavior, and deviant peer association were repeatedly assessed from baseline to 6 years after baseline using multiple methods and informants. PMTO had a beneficial effect on parenting practices relative to the control group. Two stage models linking changes in parenting generated by PMTO to children's growth in deviant peer association were supported. During the early to middle childhood stage, the relationship of improved parenting practices on deviant peer association was moderated by family socioeconomic status (SES); effective parenting was particularly important in mitigating deviant peer association for lower SES families whose children experience higher densities of deviant peers in schools and neighborhoods. During late childhood and early adolescence, the relationship of improved parenting to youths' growth in deviant peer association was mediated by reductions in the growth of delinquency during childhood; higher levels of early delinquency are likely to promote deviant peer association through processes of selective affiliation and reciprocal deviancy training. The results are discussed in terms of multilevel developmental progressions of diminished parenting, child involvement in deviancy producing processes in peer groups, and increased variety and severity of antisocial behavior, all exacerbated by ecological risks associated with low family SES.

  5. Parallel direct solver for finite element modeling of manufacturing processes

    DEFF Research Database (Denmark)

    Nielsen, Chris Valentin; Martins, P.A.F.

    2017-01-01

    The central processing unit (CPU) time is of paramount importance in finite element modeling of manufacturing processes. Because the most significant part of the CPU time is consumed in solving the main system of equations resulting from finite element assemblies, different approaches have been...

  6. The Elements of Business Process Change

    African Journals Online (AJOL)

    user

    and are actually derived; and the impact of BPC endeavors on business processes and on ..... it also helps improve relationships with customers and suppliers, empower employees, and improve ..... Reduced budget consumption. 2.79. 1.1. 8.

  7. Process to separate transuranic elements from nuclear waste

    International Nuclear Information System (INIS)

    Johnson, T.R.; Ackerman, J.P.; Tomczuk, Z.; Fischer, D.F.

    1989-01-01

    A process is described for removing transuranic elements from a waste chloride electrolytic salt containing transuranic elements in addition to rare earth and other fission product elements so the salt waste may be disposed of more easily and the valuable transuranic elements may be recovered for reuse. The salt is contacted with a cadmium-uranium alloy which selectively extracts the transuranic elements from the salt. The waste salt is generated during the reprocessing of nuclear fuel associated with the Integral Fast Reactor (IFR). 2 figs

  8. Process to separate transuranic elements from nuclear waste

    Science.gov (United States)

    Johnson, T.R.; Ackerman, J.P.; Tomczuk, Z.; Fischer, D.F.

    1989-03-21

    A process is described for removing transuranic elements from a waste chloride electrolytic salt containing transuranic elements in addition to rare earth and other fission product elements so the salt waste may be disposed of more easily and the valuable transuranic elements may be recovered for reuse. The salt is contacted with a cadmium-uranium alloy which selectively extracts the transuranic elements from the salt. The waste salt is generated during the reprocessing of nuclear fuel associated with the Integral Fast Reactor (IFR). 2 figs.

  9. The best motivator priorities parents choose via analytical hierarchy process

    Science.gov (United States)

    Farah, R. N.; Latha, P.

    2015-05-01

    Motivation is probably the most important factor that educators can target in order to improve learning. Numerous cross-disciplinary theories have been postulated to explain motivation. While each of these theories has some truth, no single theory seems to adequately explain all human motivation. The fact is that human beings in general and pupils in particular are complex creatures with complex needs and desires. In this paper, Analytic Hierarchy Process (AHP) has been proposed as an emerging solution to move towards too large, dynamic and complex real world multi-criteria decision making problems in selecting the most suitable motivator when choosing school for their children. Data were analyzed using SPSS 17.0 ("Statistical Package for Social Science") software. Statistic testing used are descriptive and inferential statistic. Descriptive statistic used to identify respondent pupils and parents demographic factors. The statistical testing used to determine the pupils and parents highest motivator priorities and parents' best priorities using AHP to determine the criteria chosen by parents such as school principals, teachers, pupils and parents. The moderating factors are selected schools based on "Standard Kualiti Pendidikan Malaysia" (SKPM) in Ampang. Inferential statistics such as One-way ANOVA used to get the significant and data used to calculate the weightage of AHP. School principals is found to be the best motivator for parents in choosing school for their pupils followed by teachers, parents and pupils.

  10. Finite element modeling of the filament winding process using ABAQUS

    OpenAIRE

    Miltenberger, Louis C.

    1992-01-01

    A comprehensive stress model of the filament winding fabrication process, previously implemented in the finite element program, WACSAFE, was implemented using the ABAQUS finite element software package. This new implementation, referred to as the ABWACSAFE procedure, consists of the ABAQUS software and a pre/postprocessing routine that was developed to prepare necessary ABAQUS input files and process ABAQUS displacement results for stress and strain computation. The ABWACSAF...

  11. Relationship processes and resilience in children with incarcerated parents.

    Science.gov (United States)

    Poehlmann, Julie; Eddy, J Mark; Dallaire, Danielle H; Zeman, Janice L; Myers, Barbara J; Mackintosh, Virginia; Kuznetsova, Maria I; Lotze, Geri M; Best, Al M; Ravindran, Neeraja; Loper, Ann Booker; Clarke, Caitlin Novero; McHale, James P; Salman, Selin; Strozier, Anne; Cecil, Dawn K; Martinez, Charles R; Burraston, Bert

    2013-06-01

    Children with incarcerated parents are at risk for a variety of problematic outcomes, yet research has rarely examined protective factors or resilience processes that might mitigate such risk in this population. In this volume, we present findings from five new studies that focus on child- or family-level resilience processes in children with parents currently or recently incarcerated in jail or prison. In the first study, empathic responding is examined as a protective factor against aggressive peer relations for 210 elementary school age children of incarcerated parents. The second study further examines socially aggressive behaviors with peers, with a focus on teasing and bullying, in a sample of 61 children of incarcerated mothers. Emotion regulation is examined as a possible protective factor. The third study contrasts children's placement with maternal grandmothers versus other caregivers in a sample of 138 mothers incarcerated in a medium security state prison. The relation between a history of positive attachments between mothers and grandmothers and the current cocaregiving alliance are of particular interest. The fourth study examines coparenting communication in depth on the basis of observations of 13 families with young children whose mothers were recently released from jail. Finally, in the fifth study, the proximal impacts of a parent management training intervention on individual functioning and family relationships are investigated in a diverse sample of 359 imprisoned mothers and fathers. Taken together, these studies further our understanding of resilience processes in children of incarcerated parents and their families and set the groundwork for further research on child development and family resilience within the context of parental involvement in the criminal justice system.

  12. Attachment, mastery, and interdependence: a model of parenting processes.

    Science.gov (United States)

    Edwards, Martha E

    2002-01-01

    A democratic nation needs an interdependent citizenry who are not only competent but who also can live together cooperatively with an eye toward what will benefit the whole as well as the self. In this article, the concept of interdependence is adopted as the central goal of parenting. The Parenting Processes Model is then presented, specifying how caregivers help children develop this interdependence. This work draws upon and integrates the work of a number of theoreticians, researchers, and clinicians, with the central focus on the work of John Bowlby, Alfred Adler, and Lev Vygotsky.

  13. Introduction to basic concepts and elements in process synthesis and process intensification

    DEFF Research Database (Denmark)

    Rong, Ben-Guang

    2017-01-01

    In this chapter, we introduce some basic concepts and elements for process synthesis (PS) and process intensification (PI). These basic concepts and elements are taken partially from distillation systems synthesis and intensification, as described in Chapter 2. In Chapter 2,we present six distill...... these common concepts and elements in the context of general PS and PI works. We hope that at least some of the concepts and elements can be examined and addressed in the methodological approaches for PS and PI....

  14. Optimization of forging processes using finite element simulations

    NARCIS (Netherlands)

    Bonte, M.H.A.; Fourment, Lionel; Do, Tien-tho; van den Boogaard, Antonius H.; Huetink, Han

    2010-01-01

    During the last decades, simulation software based on the Finite Element Method (FEM) has significantly contributed to the design of feasible forming processes. Coupling FEM to mathematical optimization algorithms offers a promising opportunity to design optimal metal forming processes rather than

  15. Effect of Processing on the Elemental Composition of Selected Leafy ...

    African Journals Online (AJOL)

    The elemental composition of leaves of Vernonia amygdalina, Gnetum africana, Gongronema latifolium and Ocimum gratissimum subjected to different processing methods were investigated. Processing methods employed include oven drying, sun drying, fresh milling, steaming and a combination of these while the mineral ...

  16. Chemical elements dynamic in the fermentation process of ethanol producing

    International Nuclear Information System (INIS)

    Nepomuceno, N.; Nadai Fernandes, E.A. de; Bacchi, M.A.

    1994-01-01

    This paper provides useful information about the dynamics of chemical elements analysed by instrumental neutron activation analysis (INAA) and, found in the various segments of the fermentation process of producing ethanol from sugar cane. For this, a mass balance of Ce, Co, Cs, Eu, Fe, Hf, La, Sc, Sm, and Th, terrigenous elements, as well as Br, K, Rb, and Zn, sugar cane plant elements, has been demonstrated for the fermentation vats in industrial conditions of ethanol production. (author). 10 refs, 4 figs, 1 tab

  17. Parenting

    Science.gov (United States)

    ... parents, people are always ready to offer advice. Parenting tips, parents' survival guides, dos, don'ts, shoulds ... right" way to be a good parent. Good parenting includes Keeping your child safe Showing affection and ...

  18. Distribution of Selected Trace Elements in the Bayer Process

    Directory of Open Access Journals (Sweden)

    Johannes Vind

    2018-05-01

    Full Text Available The aim of this work was to achieve an understanding of the distribution of selected bauxite trace elements (gallium (Ga, vanadium (V, arsenic (As, chromium (Cr, rare earth elements (REEs, scandium (Sc in the Bayer process. The assessment was designed as a case study in an alumina plant in operation to provide an overview of the trace elements behaviour in an actual industrial setup. A combination of analytical techniques was used, mainly inductively coupled plasma mass spectrometry and optical emission spectroscopy as well as instrumental neutron activation analysis. It was found that Ga, V and As as well as, to a minor extent, Cr are principally accumulated in Bayer process liquors. In addition, Ga is also fractionated to alumina at the end of the Bayer processing cycle. The rest of these elements pass to bauxite residue. REEs and Sc have the tendency to remain practically unaffected in the solid phases of the Bayer process and, therefore, at least 98% of their mass is transferred to bauxite residue. The interest in such a study originates from the fact that many of these trace constituents of bauxite ore could potentially become valuable by-products of the Bayer process; therefore, the understanding of their behaviour needs to be expanded. In fact, Ga and V are already by-products of the Bayer process, but their distribution patterns have not been provided in the existing open literature.

  19. Model studying the processes arising during fuel element overheating

    International Nuclear Information System (INIS)

    Usynin, G.B.; Anoshkin, Yu.I.; Vlasichev, G.N.; Galitskikh, Yu.N.; Semenychev, M.A.

    1986-01-01

    A calculational technique for studying heating and melting of fuel elements in the BN type reactors during an accident with heat release failure and a simulator with central rod heater intended for out-of-pile experiments is developed. The time rangeof the characteristic melting steps for the most thermally stressed fuel element at the reactor nominal power is calculated. The experimental study of the fuel element melting using a simulator with a tungsten heater has proved that the technique for the simultor and fuel can melting, respectively, is correct. The developed technique is used for determining the geometrical values and operational conditions for experiments with simulators, when quantitative and qualitative characteristics of the process under study are rather close to those natural for fuel elements

  20. Analysis of the ATR fuel element swaging process

    International Nuclear Information System (INIS)

    Richins, W.D.; Miller, G.K.

    1995-12-01

    This report documents a detailed evaluation of the swaging process used to connect fuel plates to side plates in Advanced Test Reactor (ATR) fuel elements. The swaging is a mechanical process that begins with fitting a fuel plate into grooves in the side plates. Once a fuel plate is positioned, a lip on each of two side plate grooves is pressed into the fuel plate using swaging wheels to form the joints. Each connection must have a specified strength (measured in terms, of a pullout force capacity) to assure that these joints do not fail during reactor operation. The purpose of this study is to analyze the swaging process and associated procedural controls, and to provide recommendations to assure that the manufacturing process produces swaged connections that meet the minimum strength requirement. The current fuel element manufacturer, Babcock and Wilcox (B ampersand W) of Lynchburg, Virginia, follows established procedures that include quality inspections and process controls in swaging these connections. The procedures have been approved by Lockheed Martin Idaho Technologies and are designed to assure repeatability of the process and structural integrity of each joint. Prior to July 1994, ATR fuel elements were placed in the Hydraulic Test Facility (HTF) at the Idaho National Engineering Laboratory (AGNAIL), Test Reactor Area (TRA) for application of Boehmite (an aluminum oxide) film and for checking structural integrity before placement of the elements into the ATR. The results presented in this report demonstrate that the pullout strength of the swaged connections is assured by the current manufacturing process (with several recommended enhancements) without the need for- testing each element in the HTF

  1. The parent magma of xenoliths in shergottite EETA79001: Bulk and trace element composition inferred from magmatic inclusions

    Science.gov (United States)

    Treiman, Allan H.; Lindstrom, David J.; Martinez, Rene R.

    1994-01-01

    The SNC meteorites are samples of the Martian crust, so inferences about their origins and parent magmas are of wide planetologic significance. The EETA79001 shergottite, a basalt, contains xenoliths of pyroxene-olivine cumulate rocks which are possibly related to the ALHA77005 and LEW88516 SNC lherzolites. Olivines in the xenoliths contain magmatic inclusions, relics of magma trapped within the growing crystals. The magmatic inclusions allow a parent magma composition to be retrieved; it is similar to the composition reconstructed from xenolith pyroxenes by element distribution coefficients. The xenolith parent magma is similar but not identical to parent magmas for the shergottite lherzolites.

  2. Possibilities of Particle Finite Element Methods in Industrial Forming Processes

    Science.gov (United States)

    Oliver, J.; Cante, J. C.; Weyler, R.; Hernandez, J.

    2007-04-01

    The work investigates the possibilities offered by the particle finite element method (PFEM) in the simulation of forming problems involving large deformations, multiple contacts, and new boundaries generation. The description of the most distinguishing aspects of the PFEM, and its application to simulation of representative forming processes, illustrate the proposed methodology.

  3. Chondritic Meteorites: Nebular and Parent-Body Formation Processes

    Science.gov (United States)

    Rubin, Alan E.; Lindstrom, David (Technical Monitor)

    2002-01-01

    It is important to identify features in chondrites that formed as a result of parent-body modification in order to disentangle nebular and asteroidal processes. However, this task is difficult because unmetamorphosed chondritic meteorites are mixtures of diverse components including various types of chondrules, chondrule fragments, refractory and mafic inclusions, metal-sulfide grains and fine-grained matrix material. Shocked chondrites can contain melt pockets, silicate-darkened material, metal veins, silicate melt veins, and impact-melt-rock clasts. This grant paid for several studies that went far in helping to distinguish primitive nebular features from those produced during asteroidal modification processes.

  4. Socialization Values and Parenting Practices as Predictors of Parental Involvement in Their Children's Educational Process

    NARCIS (Netherlands)

    Kikas, Eve; Tulviste, Tiia; Peets, Kätlin

    2014-01-01

    Research Findings: The purpose of this study was to examine associations between parental socialization values (including inconsistency in values), parenting practices, and parental involvement in their children's education. Altogether 242 Estonian mothers and fathers of first-grade children

  5. Organic waste process containing at least one radioactive element

    International Nuclear Information System (INIS)

    Le Roy, F.

    1977-01-01

    The description is given of an organic waste process containing at least one element from the group comprising strontium, cesium, iodine and ruthenium. It comprises the introduction of the organic waste and gaseous oxygen in a bath of melted salt containing an alkaline carbonate, the bath being maintained at a high temperature between 400 and 1000 0 C and at a pressure of 0.5 to 10 bars, so that the organic waste is burnt and oxidised at least partly, the element selected being retained by the bath of melted salt [fr

  6. R -process Element Cosmic Rays from Neutron Star Mergers

    Energy Technology Data Exchange (ETDEWEB)

    Komiya, Yutaka; Shigeyama, Toshikazu [Research Center for the Early Universe, Graduate School of Science, University of Tokyo, Hongo 7-3-1, Bunkyo-ku, 113-0033, Tokyo (Japan)

    2017-09-10

    Neutron star mergers (NSMs) are one of the most plausible sources of r -process elements in the universe. Therefore, NSMs can also be a major source of ultra-heavy elements in cosmic rays. In this paper, we first estimate the contribution of r -process elements synthesized in NSMs to the ultra-heavy element cosmic rays (UHCRs) by calculating transport equations that take into account energy loss processes and spallations. We show that the flux of UHCRs accelerated by the NSMs themselves fluctuates by many orders of magnitude on a timescale of several million years and can overwhelm UHCRs accelerated by supernova remnants (SNRs) after an NSM takes place within a few kiloparsec from the solar system. Experiments with very long exposure times using meteorites as UHCR detectors can detect this fluctuation. As a consequence, we show that if NSMs are the primary source of UHCRs, future experiments using meteorites may be able to reveal the event history of NSMs in the solar vicinity. We also describe a possible difference in the abundance pattern and energy spectrum of UHCRs between NSM and SNR accelerations.

  7. Process to determine light elements content of steel and alloys

    Energy Technology Data Exchange (ETDEWEB)

    Quintella, Cristina M.A.L.T.M.H.; Castro, Martha T.P.O. [Universidade Federal da Bahia (IQ/UFBA), Salvador, BA (Brazil). Inst. de Quimica. LabLaser; Mac-Culloch, Joao N.L.M. [PETROBRAS, Rio de Janeiro, RJ (Brazil)

    2009-07-01

    The present work reports a process to determine qualitatively and quantitatively elements of molar mass inferior to 23 within materials, by X rays spectra associated with multivariate data analysis, or chemometric analysis. The spectra is acquired between 5 keV and 22 keV when the materials are exposed to X radiation. Here is reported the direct determination of carbon content in steel and metallic alloys. The process is more effective when using spectral regions which are not usually used. From the analysis of these spectral regions which were not considered before, it was possible to detect light elements with molar mass lower than 23, which have low capacity of absorbing and emitting radiation, but have high capacity of scattering radiation. The process here reported has the advantage that X-Ray spectra obtained are calibrated multivariately, showing high potential for development in order to be used in a portable field equipment. (author)

  8. Parenting Processes and Aggression: The Role of Self-Control among Turkish Adolescents

    Science.gov (United States)

    Ozdemir, Yalcin; Vazsonyi, Alexander T.; Cok, Figen

    2013-01-01

    The present study examined the direct and indirect relationships between parenting processes (parental closeness, parental monitoring, and parental peer approval), low self-control, and aggression. Participants were 546 adolescents aged 14-18 attending state high schools in Turkey. Participants completed a questionnaire that included measures of…

  9. Quality control in the fuel elements production process

    International Nuclear Information System (INIS)

    Katanic-Popovic, J.; Spasic, Z.; Djuricis, Lj.

    1977-01-01

    Recently great attention has been paid at the international level to the analysis of production processes and quality control of fuel and fuel elements with the aim to speed up activity of proposing and accepting standards and measurement methods. IAEA also devoted great interest to these problems appealing to more active participation of all users and producers fuel elements in a general effort to secure successful work of nuclear plants. For adequate and timely participation in future in the establishment and analysis of general requirements and documentation for the control of purchased or self produced fuel elements in out country it is necessary to be well informed and to follow this activity at the international level. (author)

  10. Finite element simulation of ironing process under warm conditions

    Directory of Open Access Journals (Sweden)

    Swadesh Kumar Singh

    2014-01-01

    Full Text Available Metal forming is one of the most important steps in manufacturing of a large variety of products. Ironing in deep drawing is done by adjusting the clearance between the punch and the die and allow the material flow over the punch. In the present investigation effect of extent of ironing behavior on the characteristics of the product like thickness distribution with respect to temperature was studied. With the help of finite element simulation using explicit finite element code LS-DYNA the stress in the drawn cup were predicted in the drawn cup. To increase the accuracy in the simulation process, numbers of integration points were increased in the thickness direction and it was found that there is very close prediction of finite element results to that of experimental ones.

  11. Elements and process for recording direct image neutron radiographs

    International Nuclear Information System (INIS)

    Poignant, R.V. Jr.; Przybylowicz, E.P.

    1975-01-01

    An element is provided for recording a direct image neutron radiograph, thus eliminating the need for a transfer step (i.e., the use of a transfer screen). The element is capable of holding an electrostatic charge and comprises a first layer for absorbing neutrons and generating a current by dissipation of said electrostatic charge in proportion to the number of neutrons absorbed, and a second layer for conducting the current generated by the absorbed neutrons, said neutron absorbing layer comprising an insulative layer comprising neutron absorbing agents in a concentration of at least 10 17 atoms per cm 3 . An element for enhancing the effect of the neutron beam by utilizing the secondary emanations of neutron absorbing materials is also disclosed along with a process for using the device. (U.S.)

  12. Development and Evaluation of a Parenting Resilience Elements Questionnaire (PREQ Measuring Resiliency in Rearing Children with Developmental Disorders.

    Directory of Open Access Journals (Sweden)

    Kota Suzuki

    Full Text Available We developed a parenting resilience elements questionnaire (PREQ measuring the degree to which mothers possess elements that aid in adapting to challenges and difficulties related to children with developmental disorders (DD. A total of 424 parents of children with DD were recruited from five medical institutes. Psychometric properties of PREQ were evaluated using data of 363 mothers of children with DD. Furthermore, multiple regression analysis was performed, predicting depressive symptoms and parenting behavior with PREQ subscales, a general health questionnaire, and the total difficulties score of a strength and difficulties questionnaire. Factor analysis revealed three reliable factors: "knowledge of the child's characteristics," "perceived social supports," and "positive perceptions of parenting." Moreover, multiple regression analysis showed that "knowledge of the child's characteristics" was associated with parenting behavior, whereas "perceived social supports" predicted depressive symptoms; "positive perceptions of parenting" influenced both parenting behavior and depressive symptoms. These findings indicated that the PREQ may be used as a scale measuring resiliency in mothers of children with DD and is useful for evaluating their parenting ability in clinical interventions.

  13. Integrated Process Design and Control of Multi-element Reactive Distillation Processes

    DEFF Research Database (Denmark)

    Mansouri, Seyed Soheil; Sales-Cruz, Mauricio; Huusom, Jakob Kjøbsted

    2016-01-01

    In this work, integrated process design and control of reactive distillation processes involving multi-elements is presented. The reactive distillation column is designed using methods and tools which are similar in concept to non-reactive distillation design methods, such as driving force approach....... The methods employed in this work are based on equivalent element concept. This concept facilitates the representation of a multi-element reactive system as equivalent binary light and heavy key elements. First, the reactive distillation column is designed at the maximum driving force where through steady...

  14. Correlation between parent and daughter element concentrations as a means of valuing isochrons of igneous rocks

    International Nuclear Information System (INIS)

    Wetzel, K.

    1989-01-01

    The question whether a series of samples from an igneous rock can be attributed to an isochron for radiogeochronological dating or for determining the initial isotope ratio of the daughter element of the radioactive decay can be valued by investigating the correlation between the concentrations 1 c and 2 c of mother ( 1 c) and daughter element ( 2 c). The slope of the regression line in a lg 1 c to lg 2 c diagram is given by 1 D - 1/ 2 D - 1 or 1 D - 1/ 2 D - 1 · 2 D/ 1 D, where 1 D and 2 D are the solid-liquid distribution coefficients of parent and daughter element, if the concentration patterns are ruled by fractional crystallization or by partial melting, respectively. The agreement between experimentally found slopes and those calculated from distribution coefficients thus gives additional evidence whether or not the isochron reflects a magma solidification or magma generation age, respectively. The method is discussed for the Rb-Sr-, Sm-Nd-, La-Ce-, La-Ba- and K-Ca-geochronometers, using distribution coefficients calculated on the basis of a global model of the generation of the most abundant continental igneous rocks. The application on Rb-Sr-isochrons of a series of various granites of the Erzgebirge and the Saxonian Granulite Massif in the Southern Part of the GDR reveals new evidence of postmagmatic autosomatosis having altered the chemical composition of the Younger granites of the Western Ore Mountains (Erzgebirge). (author)

  15. Systematic Integrated Process Design and Control of Binary Element Reactive Distillation Processes

    DEFF Research Database (Denmark)

    Mansouri, Seyed Soheil; Sales-Cruz, Mauricio; Huusom, Jakob Kjøbsted

    2016-01-01

    In this work, integrated process design and control of reactive distillation processes is considered through a computer-aided framework. First, a set of simple design methods for reactive distillation column that are similar in concept to non-reactive distillation design methods are extended...... to design-control of reactive distillation columns. These methods are based on the element concept where the reacting system of compounds is represented as elements. When only two elements are needed to represent the reacting system of more than two compounds, a binary element system is identified....... It is shown that the same design-control principles that apply to a non-reacting binary system of compounds are also valid for a reactive binary system of elements for distillation columns. Application of this framework shows that designing the reactive distillation process at the maximum driving force...

  16. Design Process for Integrated Concepts with Responsive Building Elements

    DEFF Research Database (Denmark)

    Aa, Van der A.; Heiselberg, Per

    2008-01-01

    An integrated building concept is a prerequisite to come to an energy efficient building with a good and healthy IAQ indoor comfort. A design process that defines the targets and boundary conditions in the very first stage of the design and guarantees them until the building is finished and used...... is needed. The hard question is however: how to make the right choice of the combination of individual measures from building components and building services elements. Within the framework of IEA-ECBCS Annex 44 research has been conducted about the design process for integrated building concepts...

  17. Development and Evaluation of a Parenting Resilience Elements Questionnaire (PREQ) Measuring Resiliency in Rearing Children with Developmental Disorders

    Science.gov (United States)

    Suzuki, Kota; Kobayashi, Tomoka; Moriyama, Karin; Kaga, Makiko; Hiratani, Michio; Watanabe, Kyota; Yamashita, Yushiro; Inagaki, Masumi

    2015-01-01

    We developed a parenting resilience elements questionnaire (PREQ) measuring the degree to which mothers possess elements that aid in adapting to challenges and difficulties related to children with developmental disorders (DD). A total of 424 parents of children with DD were recruited from five medical institutes. Psychometric properties of PREQ were evaluated using data of 363 mothers of children with DD. Furthermore, multiple regression analysis was performed, predicting depressive symptoms and parenting behavior with PREQ subscales, a general health questionnaire, and the total difficulties score of a strength and difficulties questionnaire. Factor analysis revealed three reliable factors: “knowledge of the child’s characteristics,” “perceived social supports,” and “positive perceptions of parenting.” Moreover, multiple regression analysis showed that “knowledge of the child’s characteristics” was associated with parenting behavior, whereas “perceived social supports” predicted depressive symptoms; “positive perceptions of parenting” influenced both parenting behavior and depressive symptoms. These findings indicated that the PREQ may be used as a scale measuring resiliency in mothers of children with DD and is useful for evaluating their parenting ability in clinical interventions. PMID:26633810

  18. Quality control of CANDU6 fuel element in fabrication process

    International Nuclear Information System (INIS)

    Li Yinxie; Zhang Jie

    2012-01-01

    To enhance the fine control over all aspects of the production process, improve product quality, fuel element fabrication process for CANDU6 quality process control activities carried out by professional technical and management technology combined mode, the quality of the fuel elements formed around CANDU6 weak links - - end plug , and brazing processes and procedures associated with this aspect of strict control, in improving staff quality consciousness, strengthening equipment maintenance, improved tooling, fixtures, optimization process test, strengthen supervision, fine inspection operations, timely delivery carry out aspects of the quality of information and concerns the production environment, etc., to find the problem from the improvement of product quality and factors affecting the source, and resolved to form the active control, comprehensive and systematic analysis of the problem of the quality management concepts, effectively reducing the end plug weld microstructure after the failure times and number of defects zirconium alloys brazed, improved product quality, and created economic benefits expressly provided, while staff quality consciousness and attention to detail, collaboration department, communication has been greatly improved and achieved very good management effectiveness. (authors)

  19. Parenting among Wealthy Danish Families: A Concerted Civilising Process

    Science.gov (United States)

    Bach, Dil

    2014-01-01

    This article explores the parenting practices of wealthy Danish families and offers insight into the workings of dominant parenting norms within contemporary Danish society. Based on ethnographic fieldwork conducted among 15 families living north of Copenhagen, Denmark, this article identifies the parenting strategies of people with ample…

  20. Parental Regulation of Teenagers' Time: Processes and Meanings

    Science.gov (United States)

    Sarre, Sophie

    2010-01-01

    Parental regulation of teenagers' time is pervasive. Parents attempt to constrain, well into adolescence, what their children do with their time, when they do it and how long they do it for. This article draws on interviews with 14- to 16-year-olds in the UK to explore teenagers' experiences of parents' temporal regulation, and whether their…

  1. A finite element simulation of biological conversion processes in landfills.

    Science.gov (United States)

    Robeck, M; Ricken, T; Widmann, R

    2011-04-01

    Landfills are the most common way of waste disposal worldwide. Biological processes convert the organic material into an environmentally harmful landfill gas, which has an impact on the greenhouse effect. After the depositing of waste has been stopped, current conversion processes continue and emissions last for several decades and even up to 100years and longer. A good prediction of these processes is of high importance for landfill operators as well as for authorities, but suitable models for a realistic description of landfill processes are rather poor. In order to take the strong coupled conversion processes into account, a constitutive three-dimensional model based on the multiphase Theory of Porous Media (TPM) has been developed at the University of Duisburg-Essen. The theoretical formulations are implemented in the finite element code FEAP. With the presented calculation concept we are able to simulate the coupled processes that occur in an actual landfill. The model's theoretical background and the results of the simulations as well as the meantime successfully performed simulation of a real landfill body will be shown in the following. Copyright © 2010 Elsevier Ltd. All rights reserved.

  2. A finite element simulation of biological conversion processes in landfills

    International Nuclear Information System (INIS)

    Robeck, M.; Ricken, T.; Widmann, R.

    2011-01-01

    Landfills are the most common way of waste disposal worldwide. Biological processes convert the organic material into an environmentally harmful landfill gas, which has an impact on the greenhouse effect. After the depositing of waste has been stopped, current conversion processes continue and emissions last for several decades and even up to 100 years and longer. A good prediction of these processes is of high importance for landfill operators as well as for authorities, but suitable models for a realistic description of landfill processes are rather poor. In order to take the strong coupled conversion processes into account, a constitutive three-dimensional model based on the multiphase Theory of Porous Media (TPM) has been developed at the University of Duisburg-Essen. The theoretical formulations are implemented in the finite element code FEAP. With the presented calculation concept we are able to simulate the coupled processes that occur in an actual landfill. The model's theoretical background and the results of the simulations as well as the meantime successfully performed simulation of a real landfill body will be shown in the following.

  3. NON-LINEAR FINITE ELEMENT MODELING OF DEEP DRAWING PROCESS

    Directory of Open Access Journals (Sweden)

    Hasan YILDIZ

    2004-03-01

    Full Text Available Deep drawing process is one of the main procedures used in different branches of industry. Finding numerical solutions for determination of the mechanical behaviour of this process will save time and money. In die surfaces, which have complex geometries, it is hard to determine the effects of parameters of sheet metal forming. Some of these parameters are wrinkling, tearing, and determination of the flow of the thin sheet metal in the die and thickness change. However, the most difficult one is determination of material properties during plastic deformation. In this study, the effects of all these parameters are analyzed before producing the dies. The explicit non-linear finite element method is chosen to be used in the analysis. The numerical results obtained for non-linear material and contact models are also compared with the experiments. A good agreement between the numerical and the experimental results is obtained. The results obtained for the models are given in detail.

  4. 3D finite element modelling of sheet metal blanking process

    Science.gov (United States)

    Bohdal, Lukasz; Kukielka, Leon; Chodor, Jaroslaw; Kulakowska, Agnieszka; Patyk, Radoslaw; Kaldunski, Pawel

    2018-05-01

    The shearing process such as the blanking of sheet metals has been used often to prepare workpieces for subsequent forming operations. The use of FEM simulation is increasing for investigation and optimizing the blanking process. In the current literature a blanking FEM simulations for the limited capability and large computational cost of the three dimensional (3D) analysis has been largely limited to two dimensional (2D) plane axis-symmetry problems. However, a significant progress in modelling which takes into account the influence of real material (e.g. microstructure of the material), physical and technological conditions can be obtained by using 3D numerical analysis methods in this area. The objective of this paper is to present 3D finite element analysis of the ductile fracture, strain distribution and stress in blanking process with the assumption geometrical and physical nonlinearities. The physical, mathematical and computer model of the process are elaborated. Dynamic effects, mechanical coupling, constitutive damage law and contact friction are taken into account. The application in ANSYS/LS-DYNA program is elaborated. The effect of the main process parameter a blanking clearance on the deformation of 1018 steel and quality of the blank's sheared edge is analyzed. The results of computer simulations can be used to forecasting quality of the final parts optimization.

  5. Parental Report of the Diagnostic Process and Outcome: ASD Compared with Other Developmental Disabilities

    Science.gov (United States)

    Oswald, Donald P.; Haworth, Shannon M.; Mackenzie, Bernadette K.; Willis, Janet H.

    2017-01-01

    Parents report that the process of getting an autism spectrum disorder (ASD) diagnosis is arduous, lengthy, and fraught with difficulties. This analysis of the Pathways survey data set examined the experiences of parents who said, at the time of the survey, that their child currently had ASD compared with parents who said, at the time of the…

  6. Toward Improved Parenting Interventions for Disruptive Child Behavior : Engaging Disadvantaged Families and Searching for Effective Elements

    NARCIS (Netherlands)

    Leijten, P.H.O.

    2014-01-01

    Parenting interventions are a promising strategy to prevent antisocial behavior in society. Evidence accumulates that parenting interventions can reduce disruptive child behavior, and insight rapidly increases into which families they benefit most. At the same time, however, several high risk

  7. Parental Incarceration, Transnational Migration, and Military Deployment: Family Process Mechanisms of Youth Adjustment to Temporary Parent Absence

    Science.gov (United States)

    Rodriguez, Aubrey J.; Margolin, Gayla

    2015-01-01

    The temporary absence of a parent (e.g., due to incarceration, migration, or military deployment) is experienced by many youth and can have profound effects. Available research within these disparate literatures primarily has catalogued contextual and individual variables that influence youth adaptation, which are integrated and summarized here. In addition, we present a systematic review of proximal family process mechanisms by which youth and their family members adapt to periods of temporary parent absence. This systematic review across the different types of parent absence produced four themes: communication among family members, parenting characteristics during absence, negotiation of decision-making power and authority, and shifts in family roles. By juxtaposing the three types of temporary parent absence, we aim to bridge the separate research silos of parent absence due to incarceration, deployment, and migration, and to bring wide-ranging characteristics and processes of temporary parent-absent families into sharper focus. The review highlights possibilities for fuller integration of these literatures, and emphasizes the clinical value of considering these types of experiences from a family and relational perspective, rather than an individual coping perspective. PMID:25304163

  8. Tube Bulge Process : Theoretical Analysis and Finite Element Simulations

    International Nuclear Information System (INIS)

    Velasco, Raphael; Boudeau, Nathalie

    2007-01-01

    This paper is focused on the determination of mechanics characteristics for tubular materials, using tube bulge process. A comparative study is made between two different models: theoretical model and finite element analysis. The theoretical model is completely developed, based first on a geometrical analysis of the tube profile during bulging, which is assumed to strain in arc of circles. Strain and stress analysis complete the theoretical model, which allows to evaluate tube thickness and state of stress, at any point of the free bulge region. Free bulging of a 304L stainless steel is simulated using Ls-Dyna 970. To validate FE simulations approach, a comparison between theoretical and finite elements models is led on several parameters such as: thickness variation at the free bulge region pole with bulge height, tube thickness variation with z axial coordinate, and von Mises stress variation with plastic strain. Finally, the influence of geometrical parameters deviations on flow stress curve is observed using analytical model: deviations of the tube outer diameter, its initial thickness and the bulge height measurement are taken into account to obtain a resulting error on plastic strain and von Mises stress

  9. Discussion of ISV Scenario Scope with Operating Process Element

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Yun Goo; Oh, Eungse [Korea Hydro and Nuclear Power Co. ltd. Central Research Institute, Daejeon (Korea, Republic of)

    2015-10-15

    NUREG-0711 identifies the sampling dimension of operational conditions which includes normal operation,I and C and HSI failures, transient, and accidents. Because of practical limitation of sampling, ISV scenarios do not include every expected operational condition. To develop a scenario for the ISV, it requires much time and efforts. It takes about 1 month with 3 operating crew team for 7 scenarios for the ISV. Therefore, operational conditions are screened out for integration to scenario. TSV can be used for the evaluation of monitoring, detection, and response implementation about the inventory of information and control. However, validity of operational walkthrough for other operating process element needs to be discussed. For the situation awareness, the general acceptance check list can be derived from the result of representative scenario set of ISV. The check list may contain the number of information, type of information, level of procedure and training program. For the response planning, procedure can be used for evaluation.

  10. Guide to deliver the elements of the Clinical Caritas Process

    Directory of Open Access Journals (Sweden)

    Luana Tonin

    2017-09-01

    Full Text Available Abstract Objective: To introduce a guide to apply the elements of the Clinical Caritas Process. Methods: It is a study introducing a guide developed to identify the necessary caring actions, aiming to provide transpersonal care. It was designed from a bibliographic review and discussion with peers, who apply the theory underpinning the present study. Results: The instrument features a layout with ten lines and two columns, decoding each structural component in its enunciation with its respective care manifestations. Additionally, it showed to be a facilitator for the use of the Human Caring Theory. Conclusion: It is believed that the guide can be reproduced in order to direct the practice of transpersonal care in different settings of Brazilian nursing. Moreover, it can also be used to teach this theory.

  11. Process into Products: Supporting Teachers to Engage Parents

    Science.gov (United States)

    Abel, Yolanda

    2014-01-01

    This article addresses the need for novice teachers to receive exposure and experiences related to family engagement as part of their academic preparation to better facilitate their actual parent involvement practices. In a graduate-level parent involvement in education course, early childhood educators had an opportunity to engage in a variety of…

  12. Social signal processing for studying parent-infant interaction

    Directory of Open Access Journals (Sweden)

    Marie eAvril

    2014-12-01

    Full Text Available Studying early interactions is a core issue of infant development and psychopathology. Automatic social signal processing theoretically offers the possibility to extract and analyse communication by taking an integrative perspective, considering the multimodal nature and dynamics of behaviours (including synchrony. This paper proposes an explorative method to acquire and extract relevant social signals from a naturalistic early parent-infant interaction. An experimental setup is proposed based on both clinical and technical requirements. We extracted various cues from body postures and speech productions of partners using the IMI2S (Interaction, Multimodal Integration, and Social Signal Framework. Preliminary clinical and computational results are reported for two dyads (one pathological in a situation of severe emotional neglect and one normal control as an illustration of our cross-disciplinary protocol. The results from both clinical and computational analyses highlight similar differences: the pathological dyad shows dyssynchronic interaction led by the infant whereas the control dyad shows synchronic interaction and a smooth interactive dialog. The results suggest that the current method might be promising for future studies.

  13. Elements for successful sensor-based process control {Integrated Metrology}

    International Nuclear Information System (INIS)

    Butler, Stephanie Watts

    1998-01-01

    Current productivity needs have stimulated development of alternative metrology, control, and equipment maintenance methods. Specifically, sensor applications provide the opportunity to increase productivity, tighten control, reduce scrap, and improve maintenance schedules and procedures. Past experience indicates a complete integrated solution must be provided for sensor-based control to be used successfully in production. In this paper, Integrated Metrology is proposed as the term for an integrated solution that will result in a successful application of sensors for process control. This paper defines and explores the perceived four elements of successful sensor applications: business needs, integration, components, and form. Based upon analysis of existing successful commercially available controllers, the necessary business factors have been determined to be strong, measurable industry-wide business needs whose solution is profitable and feasible. This paper examines why the key aspect of integration is the decision making process. A detailed discussion is provided of the components of most importance to sensor based control: decision-making methods, the 3R's of sensors, and connectivity. A metric for one of the R's (resolution) is proposed to allow focus on this important aspect of measurement. A form for these integrated components which synergistically partitions various aspects of control at the equipment and MES levels to efficiently achieve desired benefits is recommended

  14. Elements for successful sensor-based process control {Integrated Metrology}

    Science.gov (United States)

    Butler, Stephanie Watts

    1998-11-01

    Current productivity needs have stimulated development of alternative metrology, control, and equipment maintenance methods. Specifically, sensor applications provide the opportunity to increase productivity, tighten control, reduce scrap, and improve maintenance schedules and procedures. Past experience indicates a complete integrated solution must be provided for sensor-based control to be used successfully in production. In this paper, Integrated Metrology is proposed as the term for an integrated solution that will result in a successful application of sensors for process control. This paper defines and explores the perceived four elements of successful sensor applications: business needs, integration, components, and form. Based upon analysis of existing successful commercially available controllers, the necessary business factors have been determined to be strong, measurable industry-wide business needs whose solution is profitable and feasible. This paper examines why the key aspect of integration is the decision making process. A detailed discussion is provided of the components of most importance to sensor based control: decision-making methods, the 3R's of sensors, and connectivity. A metric for one of the R's (resolution) is proposed to allow focus on this important aspect of measurement. A form for these integrated components which synergistically partitions various aspects of control at the equipment and MES levels to efficiently achieve desired benefits is recommended.

  15. Finite element meshing approached as a global minimization process

    Energy Technology Data Exchange (ETDEWEB)

    WITKOWSKI,WALTER R.; JUNG,JOSEPH; DOHRMANN,CLARK R.; LEUNG,VITUS J.

    2000-03-01

    The ability to generate a suitable finite element mesh in an automatic fashion is becoming the key to being able to automate the entire engineering analysis process. However, placing an all-hexahedron mesh in a general three-dimensional body continues to be an elusive goal. The approach investigated in this research is fundamentally different from any other that is known of by the authors. A physical analogy viewpoint is used to formulate the actual meshing problem which constructs a global mathematical description of the problem. The analogy used was that of minimizing the electrical potential of a system charged particles within a charged domain. The particles in the presented analogy represent duals to mesh elements (i.e., quads or hexes). Particle movement is governed by a mathematical functional which accounts for inter-particles repulsive, attractive and alignment forces. This functional is minimized to find the optimal location and orientation of each particle. After the particles are connected a mesh can be easily resolved. The mathematical description for this problem is as easy to formulate in three-dimensions as it is in two- or one-dimensions. The meshing algorithm was developed within CoMeT. It can solve the two-dimensional meshing problem for convex and concave geometries in a purely automated fashion. Investigation of the robustness of the technique has shown a success rate of approximately 99% for the two-dimensional geometries tested. Run times to mesh a 100 element complex geometry were typically in the 10 minute range. Efficiency of the technique is still an issue that needs to be addressed. Performance is an issue that is critical for most engineers generating meshes. It was not for this project. The primary focus of this work was to investigate and evaluate a meshing algorithm/philosophy with efficiency issues being secondary. The algorithm was also extended to mesh three-dimensional geometries. Unfortunately, only simple geometries were tested

  16. The Effects of Sensory Processing and Behavior of Toddlers on Parent Participation: A Pilot Study

    Science.gov (United States)

    DaLomba, Elaina; Baxter, Mary Frances; Fingerhut, Patricia; O'Donnell, Anne

    2017-01-01

    Occupational therapists treat children with sensory processing and behavioral concerns, however, little information exists on how these issues affect parent participation. This pilot study examined the sensory processing and behaviors of toddlers with developmental delays and correlated these with parents' perceived ability to participate in…

  17. Breaking the sound barrier: exploring parents' decision-making process of cochlear implants for their children.

    Science.gov (United States)

    Chang, Pamara F

    2017-08-01

    To understand the dynamic experiences of parents undergoing the decision-making process regarding cochlear implants for their child(ren). Thirty-three parents of d/Deaf children participated in semi-structured interviews. Interviews were digitally recorded, transcribed, and coded using iterative and thematic coding. The results from this study reveal four salient topics related to parents' decision-making process regarding cochlear implantation: 1) factors parents considered when making the decision to get the cochlear implant for their child (e.g., desire to acculturate child into one community), 2) the extent to which parents' communities influence their decision-making (e.g., norms), 3) information sources parents seek and value when decision-making (e.g., parents value other parent's experiences the most compared to medical or online sources), and 4) personal experiences with stigma affecting their decision to not get the cochlear implant for their child. This study provides insights into values and perspectives that can be utilized to improve informed decision-making, when making risky medical decisions with long-term implications. With thorough information provisions, delineation of addressing parents' concerns and encompassing all aspects of the decision (i.e., medical, social and cultural), health professional teams could reduce the uncertainty and anxiety for parents in this decision-making process for cochlear implantation. Copyright © 2017 Elsevier B.V. All rights reserved.

  18. Parent-child communication processes: preventing children's health-risk behavior.

    Science.gov (United States)

    Riesch, Susan K; Anderson, Lori S; Krueger, Heather A

    2006-01-01

    Review individual, family, and environmental factors that predict health-risk behavior among children and to propose parent-child communication processes as a mechanism to mediate them. Improving parent-child communication processes may: reduce individual risk factors, such as poor academic achievement or self-esteem; modify parenting practices such as providing regulation and structure and acting as models of health behavior; and facilitate discussion about factors that lead to involvement in health-risk behaviors. Assessment strategies to identify youth at risk for health-risk behavior are recommended and community-based strategies to improve communication among parents and children need development.

  19. Composite elements with superconducting ceramic materials and preparation process

    International Nuclear Information System (INIS)

    Drifford, M.; Lambard, J.

    1990-01-01

    Supraconducting ceramic powder is introduced in a ductile metal with an open porosity, then the tube is sealed at both ends and necked to form a composite element which is sintered and the ceramic becomes superconductive by gaseous diffusion. Then the composite element can be placed into a gasproof cladding [fr

  20. Analysis of Tube Drawing Process – A Finite Element Approach ...

    African Journals Online (AJOL)

    In this paper the effect of die semi angle on drawing load in cold tube drawing has been investigated numerically using the finite element method. The equation governing the stress distribution was derived and solved using Galerkin finite element method. An isoparametric formulation for the governing equation was utilized ...

  1. Parents.

    Science.gov (United States)

    Hurst, Hunter, Ed.; And Others

    1986-01-01

    This document contains the fifth volume of "Today's Delinquent," an annual publication of the National Center for Juvenile Justice. This volume deals with the issue of the family and delinquency, examining the impact of parental behavior on the production of delinquent behavior. "Parents: Neglectful and Neglected" (Laurence D. Steinberg) posits…

  2. Separation process of heavy rare earth elements from xenotime ore

    International Nuclear Information System (INIS)

    Sri Sukmajaya; Tri Handini; Wahyu Rachmi Pusparini; Dwi Biyantoro

    2016-01-01

    Separation process of heavy rare earth elements from xenotime ore had been done. A 100 mesh of xenotime ore was upgrade using water, sodium silicate and oleic acid in pH 9. Mixed of slurry by air blown in room temperature along 30 minutes. The middle of slurry xenotime was be separated, then dried and so added soda caustic, potassium carbonate and ammonium dihydrogen phosphate. The mix was be homogenized then leached in furnace to 700°C temperature along 4 hours. The frits of leaching product would be leached using 1200 mL volume of water that made oxidation by HCl onto pH 4 by agitated heated in 70°C temperature. The mix was filtered, then solid settled was be dried and then to processed again in water HCl acidified leaching alike before until pH 4 with minimized HCl added least 2 mL. The solid settled filled into 1000 mL of beker glass, added HCl viscous in 300 mL volume, hydrogen peroxide and BaCl_2/Na_2SO_4/Na_2S then heated to 100°C temperature. Let in room temperature then was filtrated. The solid settled as ThSO_4/ThS, RaSO_4/RaS. The filtrate to be settled using 15g (NH_4)_2CO_3 in 100 mL volume of water while mixed until the solution reached pH 2. The solid settled was be dried, then into the filtrate added 10 mL volume of formic acid. The solid settled of filtration was be dried. The solution of filtrate to be settled using (NH_4)_2CO_3 until pH 4. The solid settled was be filtered and dried. The filtrate was be settled using oxalic acid. The analysis of standard of oxide rare earth had been done using XRF Am"2"4"1 source. Result of these process got 100 mesh xenotime upgrade those leached in 700°C along 4 hours used (NH_4)H_2PO_4 so HRE total lifted up from 4.31 to 8.16%. Resulted of HRE oxide yield was 17.76% in pH 2. HRE oxide yield in pH 4 was 38.45%, and HRE oxide yield was 6.38% as oxalic compound, so the total HRE oxide yield was 62.59%. (author)

  3. Conceptualizing the key processes of Mindful Parenting and its application to youth mental health.

    Science.gov (United States)

    Townshend, Kishani

    2016-12-01

    Youth mental health disorders are rising across the world. Mindful Parenting could be a potential tool to promote youth mental health. The primary distinction between Mindful Parenting programs and other behavioral parenting programs is the focus on emotional literacy and compassion. However, this emerging field has gaps in its theory and evidence. In order to objectively evaluate the impact of Mindful Parenting, it is important to identify how it promotes change. This theoretical paper aims to articulate the key change processes of Mindful Parenting that promote positive outcomes. A literature review was conducted to synthesize the change processes outlined by different authors in the field. Key processes argued to promote Mindful Parenting were aligned with five main categories, namely attention, intention, attitude, attachment and emotion. More specifically the change processes were listening, emotional awareness, emotional regulation, attentional regulation, attunement, attention to variability, intentionality, reperceiving, compassion and non-judgmental acceptance. This preliminary analysis attempted to understand how Mindful Parenting fosters change and transformation. Whilst there are numerous change processes, the essence of Mindful Parenting appears to be the ability to be responsive to a child's needs. © The Royal Australian and New Zealand College of Psychiatrists 2016.

  4. Family Structure, Family Processes, and Adolescent Delinquency: The Significance of Parental Absence versus Parental Gender

    Science.gov (United States)

    Demuth, Stephen; Brown, Susan L.

    2004-01-01

    One third of all children are born to unmarried mothers and over one half of children will spend some time in a single-parent family. In fact, single-father families are the fastest growing family form. Using data from the 1995 National Longitudinal Survey of Adolescent Health, the authors extend prior research that has investigated the effects of…

  5. Parental Involvement and Children's School Achievement: Evidence for Mediating Processes

    Science.gov (United States)

    Rogers, Maria A.; Theule, Jennifer; Ryan, Bruce A.; Adams, Gerald R.; Keating, Leo

    2009-01-01

    This study used path analytic techniques and an ecological framework to examine the association between children's perceptions of their parents' educational involvement, children's personal characteristics, and their school achievement. Fathers' academic pressure was predictive of lower achievement, whereas mothers' encouragement and support…

  6. Pathways to Parental Knowledge: The Role of Family Process and Family Structure

    Science.gov (United States)

    Padilla-Walker, Laura M.; Harper, James M.; Bean, Roy A.

    2011-01-01

    The purpose of the current study was (a) to examine the role of family process on child disclosure, parental solicitation, and parental knowledge and (b) to examine how patterns might differ as a function of family structure. Data for this study were taken from the Flourishing Families Project, which consists of 353 two- and 147 single-parent…

  7. Parents of children with cerebral palsy : a review of factors related to the process of adaptation

    NARCIS (Netherlands)

    Rentinck, I. C. M.; Ketelaar, M.; Jongmans, M. J.; Gorter, J. W.

    Background Little is known about the way parents adapt to the situation when their child is diagnosed with cerebral palsy. Methods A literature search was performed to gain a deeper insight in the process of adaptation of parents with a child with cerebral palsy and on factors related to this

  8. Help-seeking process of parents for psychopathology in youths with moderate to borderline intellectual disabilities

    NARCIS (Netherlands)

    Douma, J.C.H.; Dekker, M.C.; de Ruiter, K.P.; Verhulst, F.C.; Koot, H.M.

    2006-01-01

    OBJECTIVE: To study the help-seeking process of parents for emotional or behavioral problems in their child with borderline to moderate intellectual disabilities. METHOD: In 2003, in a special education-based sample of 522 youths (ages 10-18years, response = 77.9%), we studied the parents'

  9. Children's Well-Being during Parents' Marital Disruption Process: A Pooled Time-Series Analysis.

    Science.gov (United States)

    Sun, Yongmin; Li, Yuanzhang

    2002-01-01

    Examines the extent to which parents' marital disruption process affects children's academic performance and well-being both before and after parental divorce. Compared with peers in intact families, children of divorce faired less well. Discusses how family resources mediate detrimental effects over time. Similar results are noted for girls and…

  10. Effects of Process Parameters on Copper Powder Compaction Process Using Multi-Particle Finite Element Method

    Science.gov (United States)

    Güner, F.; Sofuoğlu, H.

    2018-01-01

    Powder metallurgy (PM) has been widely used in several industries; especially automotive and aerospace industries and powder metallurgy products grow up every year. The mechanical properties of the final product that is obtained by cold compaction and sintering in powder metallurgy are closely related to the final relative density of the process. The distribution of the relative density in the die is affected by parameters such as compaction velocity, friction coefficient and temperature. Moreover, most of the numerical studies utilizing finite element approaches treat the examined environment as a continuous media with uniformly homogeneous porosity whereas Multi-Particle Finite Element Method (MPFEM) treats every particles as an individual body. In MPFEM, each of the particles can be defined as an elastic- plastic deformable body, so the interactions of the particles with each other and the die wall can be investigated. In this study, each particle was modelled and analyzed as individual deformable body with 3D tetrahedral elements by using MPFEM approach. This study, therefore, was performed to investigate the effects of different temperatures and compaction velocities on stress distribution and deformations of copper powders of 200 µm-diameter in compaction process. Furthermore, 3-D MPFEM model utilized von Mises material model and constant coefficient of friction of μ=0.05. In addition to MPFEM approach, continuum modelling approach was also performed for comparison purposes.

  11. The parent magma of the Nakhla (SNC) meteorite: Reconciliation of composition estimates from magmatic inclusions and element partitioning

    Science.gov (United States)

    Treiman, A. H.

    1993-01-01

    The composition of the parent magma of the Nakhla meteorite was difficult to determine, because it is accumulate rock, enriched in olivine and augite relative to a basalt magma. A parent magma composition is estimated from electron microprobe area analyses of magmatic inclusions in olivine. This composition is consistent with an independent estimate based on the same inclusions, and with chemical equilibria with the cores of Nakhla's augites. This composition reconciles most of the previous estimates of Nakhla's magma composition, and obviates the need for complex magmatic processes. Inconsistency between this composition and those calculated previously suggests that magma flowed through and crystallized into Nakhla as it cooled.

  12. Mediating factors of coping process in parents of children with type 1 diabetes.

    Science.gov (United States)

    Oskouie, Fatemeh; Mehrdad, Neda; Ebrahimi, Hossein

    2013-05-14

    Type 1 diabetes is a lifelong condition for children and their parents, the management for which imposes a vast responsibility. This study explores the mediating factors that affect Iranian parents' coping processes with their children's type 1 diabetes. Research was conducted using the grounded theory method. Participants were selected purposefully, and we continued with theoretical sampling. Constant comparative analysis was used to analyze the data. The mediating factors of the parental coping process with their child's diabetes consist of the child's cooperation, crises and experiences, economic challenges, and parental participation in care. Findings highlight the necessity of well-informed nurses with insightful understanding of the mediating factors in parental coping with juvenile diabetes in order to meet the particular needs of this group.

  13. Modelling of the radioactive daughter elements in soil to assess radiation impact due to contaminated irrigation water by parents of 231Pa, 226Ra, 238U, 237Np and 239Pu

    International Nuclear Information System (INIS)

    Bela Kanyar; Katalin Eged; Tunde Katona; Gerhard Proehl; Ulla Bergstroem; Bengt Hallberg; Shelly Mobbs; Geert Olyslaegers; Theo Zeevaert; Palome Pinedo; Inmaculade Simon

    2004-01-01

    Radioactive wastes may contain both parent and daughter radionuclides. In some cases the transfer parameters of the daughter radio-elements differ significantly from that of the parent ones and therefore the dose contributions in the different pathways might be important to assess separately. The present work has compared 5 different site specific models by a scenario, using contaminated water for drinking and irrigation. Altogether 5 radionuclides from the investigated 10 ones contained radioactive daughter elements. In general, for long term studies in biosphere the steady-state formulations of processes are adequate to assess the contamination, except the infiltration into the deeper soil and sediment layers. According to the results of the modelling and computer simulations, the following daughters are to be assessed separately from their parents with respect to the radiation impact: for parent 231 Pa the daughter 227 Ac, for parent 226 Ra the daughters 222 Rn, 210 Pb and 210 Po and for parent 237 Np the daughter 233 Pa. The dose contributions of the daughters from parents 238 U and 239 Pu are less significant during the considered 100-10000 years. In case of contamination of irrigation water with 1 Bq x m -3 of the parent radionuclide 231 Pa, more than 90% of the external dose from soil exposure comes from the daughter 227 Ac (annually 15 nSv). By a similar contamination with 226 Ra as a parent radionuclide, 60% of the ingestion dose is due to food contamination with the daughters 210 Pb and 210 Po (approximately 150 nSv x a -1 ). (author)

  14. Intervention decision-making processes and information preferences of parents of children with autism spectrum disorders.

    Science.gov (United States)

    Grant, N; Rodger, S; Hoffmann, T

    2016-01-01

    When a child is diagnosed with autism, parents are faced with the task of choosing from many different intervention options. To find information about the options available, parents turn to a number of different sources. This study explores parents' (n = 23) intervention decision-making processes and information preferences following the diagnosis of ASD for their child. Qualitative thematic analysis of verbatim transcripts from interviews and focus groups involving parents of children with an autism diagnosis was undertaken. Analysis of the results revealed that there are concurrent emotional and pragmatic intervention 'journeys' undertaken by parents post diagnosis, which encompass the primary themes of: (1) information sources used, (2) parents' information preferences and (3) factors influencing intervention decision making. Parents described a journey from the point of diagnosis that involved seeking information on ASD interventions from multiple sources, with the Internet being the primary source. They were overwhelmed by the sheer volume of information available, and their preferences for information varied according to their stage in the journey post diagnosis. Parents had a 'trial and error' approach to choosing ASD interventions, with confidence increasing as they became more familiar with their child's condition, and had opportunities to explore numerous information sources about their child's diagnosis. While confidence increased over time, consideration of the effectiveness or evidence supporting interventions remained largely absent throughout the journey. This study highlights the need for parents of children with ASD to be supported to make informed intervention decisions, particularly with consideration for research evidence. © 2015 John Wiley & Sons Ltd.

  15. Elements of knowledge management in the improvement of business processes

    OpenAIRE

    Brajer-Marczak Renata

    2016-01-01

    The key role in process management is played by the systematic analysis, measurement and improvement of processes. The imperative of continuous introduction of changes in processes is the answer to the changing conditions of competition and the great dynamics in the expectations and preferences of customers. Information related to business process should be collected and formalized in order to improve the execution of processes. In connection with the above, it may be stated that the improvem...

  16. Environmental implications of element emissions from phosphate-processing operations in southeastern Idaho

    Science.gov (United States)

    Severson, R.C.; Gough, L.P.

    1979-01-01

    In order to assess the contribution to plants and soils of certain elements emitted by phosphate processing, we sampled sagebrush, grasses, and A- and C-horizon soils along upwind and downwind transects at Pocatello and Soda Springs, Idaho. Analyses for 70 elements in plants showed that, statistically, the concentration of 7 environmentally important elements, cadmium, chromium, fluorine, selenium, uranium, vanadium, and zinc, were related to emissions from phosphate-processing operations. Two additional elements, lithium and nickel, show probable relationships. The literature on the effects of these elements on plant and animal health is briefly surveyed. Relations between element content in plants and distance from the phosphate-processing operations were stronger at Soda Springs than at Pocatello and, in general, stronger in sagebrush than in the grasses. Analyses for 58 elements in soils showed that, statistically, beryllium, fluorine, iron, lead, lithium, potassium, rubidium, thorium, and zinc were related to emissions only at Pocatello and only in the A horizon. Moreover, six additional elements, copper, mercury, nickel, titanium, uranium, and vanadium, probably are similarly related along the same transect. The approximate amounts of elements added to the soils by the emissions are estimated. In C-horizon soils, no statistically significant relations were observed between element concentrations and distance from the processing sites. At Soda Springs, the nonuniformity of soils at the sampling locations may have obscured the relationship between soil-element content and emissions from phosphate processing.

  17. Long-term impact of prevention programs to promote effective parenting: lasting effects but uncertain processes.

    Science.gov (United States)

    Sandler, Irwin N; Schoenfelder, Erin N; Wolchik, Sharlene A; MacKinnon, David P

    2011-01-01

    This article reviews findings from 46 randomized experimental trials of preventive parenting interventions. The findings of these trials provide evidence of effects to prevent a wide range of problem outcomes and to promote competencies from one to 20 years later. However, there is a paucity of evidence concerning the processes that account for program effects. Three alternative pathways are proposed as a framework for future research on the long-term effects of preventive parenting programs: (a) through program effects on parenting skills, perceptions of parental efficacy, and reduction in barriers to effective parenting; (b) through program-induced reductions in short-term problems of youth that persist over time, improvements in youth adaptation to stress, and improvements in youth belief systems concerning the self and their relationships with others; and (c) through effects on contexts in which youth become involved and on youth-environment transactions.

  18. Lithium zirconate elements fabricated by industrial scale processes

    International Nuclear Information System (INIS)

    Roux, N.

    1991-01-01

    Lithium metazirconate Li 2 ZrO 3 is one of the leading tritium breeding ceramics contemplated in solid blanket concepts for fusion reactors. Among its merits are fair physical properties, satisfactory compatibility with structural materials and beryllium, satisfactory mechanical strength, excellent irradiation behaviour as shown by a comparative irradiation of ceramics in the EBR II reactor, and very good tritium release performance as evidenced in the MOZART and EXOTIC neutron irradiations. Pechiney and the CEA are jointly involved in developing industrial fabrication of Li 2 ZrO 3 elements to the microstructural and geometrical specifications required for their use in the solid blankets as conceived in the European Program

  19. Transposable Element Misregulation Is Linked to the Divergence between Parental piRNA Pathways in Drosophila Hybrids.

    Science.gov (United States)

    Romero-Soriano, Valèria; Modolo, Laurent; Lopez-Maestre, Hélène; Mugat, Bruno; Pessia, Eugénie; Chambeyron, Séverine; Vieira, Cristina; Garcia Guerreiro, Maria Pilar

    2017-06-01

    Interspecific hybridization is a genomic stress condition that leads to the activation of transposable elements (TEs) in both animals and plants. In hybrids between Drosophila buzzatii and Drosophila koepferae, mobilization of at least 28 TEs has been described. However, the molecular mechanisms underlying this TE release remain poorly understood. To give insight on the causes of this TE activation, we performed a TE transcriptomic analysis in ovaries (notorious for playing a major role in TE silencing) of parental species and their F1 and backcrossed (BC) hybrids. We find that 15.2% and 10.6% of the expressed TEs are deregulated in F1 and BC1 ovaries, respectively, with a bias toward overexpression in both cases. Although differences between parental piRNA (Piwi-interacting RNA) populations explain only partially these results, we demonstrate that piRNA pathway proteins have divergent sequences and are differentially expressed between parental species. Thus, a functional divergence of the piRNA pathway between parental species, together with some differences between their piRNA pools, might be at the origin of hybrid instabilities and ultimately cause TE misregulation in ovaries. These analyses were complemented with the study of F1 testes, where TEs tend to be less expressed than in D. buzzatii. This can be explained by an increase in piRNA production, which probably acts as a defence mechanism against TE instability in the male germline. Hence, we describe a differential impact of interspecific hybridization in testes and ovaries, which reveals that TE expression and regulation are sex-biased. © The Author 2017. Published by Oxford University Press on behalf of the Society for Molecular Biology and Evolution.

  20. Longitudinal associations between marital stress and externalizing behavior: Does parental sense of competence mediate processes?

    Science.gov (United States)

    van Eldik, Willemijn M; Prinzie, Peter; Deković, Maja; de Haan, Amaranta D

    2017-06-01

    Ecological theories emphasize associations between children and elements within their family system, such as the marital relationship. Within a developmental perspective, we longitudinally examined (a) dynamic associations between marital stress and children's externalizing behavior, (b) mediation of these associations by parental sense of competence, and (c) the extent to which associations are similar for mothers and fathers. The sample consisted of 369 two-parent families (46.1% boys; Mage at Time 1 = 7.70 years; 368 mothers, 355 fathers). Marital stress related to having a child, children's externalizing behavior, and perceived parental competence were assessed three times across 8 years. Multigroup analyses were used to examine models for both parents simultaneously and test for similarity in associations across spouses. A bivariate latent growth model indicated positive associated change between marital stress and externalizing behavior, supporting the idea of codevelopment. The cross-lagged panel model revealed a reciprocal relation between marital stress and perceived parental competence across a time interval of 6 years. Additionally, two elicitation effects appeared during adolescence, showing that parents who reported higher externalizing problems in early adolescence reported more marital stress and a lower sense of competence two years later. Similar associations were found for mothers and fathers. Overall, this study indicates that marital stress and externalizing behavior codevelop over time and supports literature on developmental differences regarding interrelations between subsystems and individuals within the family system. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  1. Fabrication of HTR fuel elements by a gaseous impregnation process

    International Nuclear Information System (INIS)

    Blin, J.C.; Berthier, J.; Devillard, J.

    1976-01-01

    The results obtained with the gaseous impregnation process are described. The successive steps of the fabrication in their present state of realization are given together with the results obtained after irradiation. A comparison between this process and a classical method is presented

  2. Influences of in-fuel physical-chemical processes on serviceability of energy reactor fuel elements

    Energy Technology Data Exchange (ETDEWEB)

    Bibilashvili, Yu K; Nekrasova, G A; Sukhanov, G I

    1989-01-01

    In-fuel physico-chemical processes and their effect on stress corrosion cracking of fuel element zirconium cladding are considered in the review. The mechanism of fission product release from the fuel is studied and the negative role of primarily iodine on the cladding corrosion process is demonstrated. Directions for improving the fuel element claddings and fuel to increase the fuel element serviceability are specified.

  3. Influences of in-fuel physical-chemical processes on serviceability of energy reactor fuel elements

    International Nuclear Information System (INIS)

    Bibilashvili, Yu.K.; Nekrasova, G.A.; Sukhanov, G.I.

    1989-01-01

    In-fuel physico-chemical processes and their effect on stress corrosion cracking of fuel element zirconium cladding are considered in the review. The mechanism of fission product release from the fuel is studied and the negative role of primarily iodine on the cladding corrosion process is demonstrated. Directions for improving the fuel element claddings and fuel to increase the fuel element serviceability are specified

  4. 21st Century Parent-Child Sex Communication in the U.S.: A Process Review

    Science.gov (United States)

    Flores, Dalmacio; Barroso, Julie

    2018-01-01

    Parent-child sex communication results in the transmission of family expectations, societal values, and role modeling of sexual health risk reduction strategies. Parent-child sex communication’s potential to curb negative sexual health outcomes has sustained a multidisciplinary effort to better understand the process and its impact on the development of healthy sexual attitudes and behaviors among adolescents. This review advances what is known about the process of sex communication in the U.S. by reviewing studies published from 2003 to 2015. We used CINAHL, PsycInfo and Pubmed, the key-terms “parent child” AND “sex education” for the initial query; we included 116 original articles for analysis. Our review underscores long-established factors that prevent parents from effectively broaching and sustaining talks about sex with their children and has also identified emerging concerns unique to today’s parenting landscape. Parental factors salient to sex communication are established long before individuals become parents and are acted upon by influences beyond the home. Child-focused communication factors likewise describe a maturing audience that is far from captive. The identification of both enduring and emerging factors that affect how sex communication occurs will inform subsequent work that will result in more positive sexual health outcomes for adolescents. PMID:28059568

  5. 21st Century Parent-Child Sex Communication in the United States: A Process Review.

    Science.gov (United States)

    Flores, Dalmacio; Barroso, Julie

    Parent-child sex communication results in the transmission of family expectations, societal values, and role modeling of sexual health risk-reduction strategies. Parent-child sex communication's potential to curb negative sexual health outcomes has sustained a multidisciplinary effort to better understand the process and its impact on the development of healthy sexual attitudes and behaviors among adolescents. This review advances what is known about the process of sex communication in the United States by reviewing studies published from 2003 to 2015. We used the Cumulative Index to Nursing and Allied Health Literature (CINAHL), PsycINFO, SocINDEX, and PubMed, and the key terms "parent child" AND "sex education" for the initial query; we included 116 original articles for analysis. Our review underscores long-established factors that prevent parents from effectively broaching and sustaining talks about sex with their children and has also identified emerging concerns unique to today's parenting landscape. Parental factors salient to sex communication are established long before individuals become parents and are acted upon by influences beyond the home. Child-focused communication factors likewise describe a maturing audience that is far from captive. The identification of both enduring and emerging factors that affect how sex communication occurs will inform subsequent work that will result in more positive sexual health outcomes for adolescents.

  6. Process to produce pellet-shaped neutron activation detector elements

    International Nuclear Information System (INIS)

    Ambardanischvili, T.S.; Dundua, V.J.; Kiknadse, G.I.; Kolomijzev, M.A.; Zezchladse, T.V.; Gromov, V.A.; Bagdavadse, N.V.

    1979-01-01

    The neutron activator detector elements to measure integral neutron flux contain cobalt, zinc, phosphorous, iron, gold, indium, nickel or aluminium as detector material. Its non-aqueous nitric or acetic acid salts are solvated in an alcohol solution and mixed with an alcohol solution of phenol formaldehyde resol resin. The alcohol is destilled off under vacuum at a temperature of 60 to 90 0 C whereby the detector material in the resin matrix is homogenized. This mass is their ground, pressed to pellets and is heated to convert the resin into its unsoluble state. In order to improve the radioresistance, one can add powdered carbon to the alcohol mixture, where the carbon itself can be prepared by pyrolysis and carbonization of phenol formaldehyde resin. To improve the temperature change resistance, the pellets may be additionally heated giving rise to puyrolysis of the polycondensation resin. (DG) [de

  7. CREATIVE MEDITATION CENTERED ON NATURAL ELEMENTS: CONSEQUENCES ON COGNITIVE PROCESSING

    Directory of Open Access Journals (Sweden)

    Nicoleta Răban-Motounu

    2016-12-01

    Full Text Available The article explores some of the effects of a creative meditation centered on a natural element (fire on different aspects of cognitive functioning, commonly associated with well-being, either positively (self-esteem, or negatively (automatic negative thinking and thought suppression. The results showed that while self-esteem improves after the creative meditation, automatic negative thinking and thought suppression do not decrease significantly. The conclusion is that the creative meditation helps in getting in touch with Self, supporting a healthy self-esteem when taking into consideration the social standards, but this also means accepting both positive and negative aspects of self, including the automatic negative thinking and thought suppression. This recommends the technique as a useful tool for psychotherapeutic and personal development use, as the vulnerabilities may become the focus without unnecessary self-blame, but with an intuitive solution in mind to turn them into personal resources.

  8. Dynamic Training Elements in a Circuit Theory Course to Implement a Self-Directed Learning Process

    Science.gov (United States)

    Krouk, B. I.; Zhuravleva, O. B.

    2009-01-01

    This paper reports on the implementation of a self-directed learning process in a circuit theory course, incorporating dynamic training elements which were designed on the basis of a cybernetic model of cognitive process management. These elements are centrally linked in a dynamic learning frame, created on the monitor screen, which displays the…

  9. Finite element simulation of laser cutting process of steel sheet

    Directory of Open Access Journals (Sweden)

    Meško Jozef

    2018-01-01

    Full Text Available Lasers are widely used in industry as cutting tools due to ultra flexibility of the cutting conditions, obtaining high quality end product, quick set up, non-mechanical contact between the workpiece and the tool, and small size of the heat affected zone. In the present study, laser gas assisted cutting process is examined. The laser cutting sheet solution is practically always very convenient compared to conventional technologies and brings the greatest cost savings in the manufacturing process.

  10. The Elements Way: Empowering Parents, Educators, and Mentors in the Age of New Media

    Directory of Open Access Journals (Sweden)

    Gila Cohen Zilka

    2017-04-01

    Full Text Available Aim/Purpose: This study was designed to examine the effectiveness of mentor’s work with immigrant children and adolescents at risk, using the Elements Way. Background: The New Media offers our “screen kids” a lot of information, many behavioral models, and a new type of social communication. The Elements Way is an educational method designed to enhance openness, development, breakthroughs, goal achievement, and transformation in the age of media and social networks. Methodology: The Elements Way was developed following research on communication in the diversified media, especially new media such as Facebook, WhatsApp, and television reality shows, and the study is an examination of the effectiveness of mentors’ work with immigrant children and adolescents at risk, using the Elements Way. All mentors had been trained in the Elements Way. The study population included 640 mentors working with immigrants’ children in Israel. The work was conducted in 2010-2013. The mixed-methods approach was selected to validate findings. Contribution: Empowering children and enhancing their ability to cope; Creating openness and sharing, making children more attentive to the significant adults in their lives; Supporting children who face the complex reality that characterizes our age. Findings: Significant differences were found in the mentors’ conduct with the children. Work programs were designed and implemented with care and consistency, and mentors succeeded in generating change within the children and achieving desired goals. Of the 640 participating mentors, 62 were not able to promote the child, and interviews with them revealed that their work with the children was not consistent with the Elements Way and began from a different vantage point. Recommendations for Practitioners: Success factors: Self-awareness and awareness of one’s surroundings. Empathy. Willingness to engage in significant interactions. Self-cleansing and self

  11. Long-term Impact of Prevention Programs to Promote Effective Parenting: Lasting Effects but Uncertain Processes

    OpenAIRE

    Sandler, Irwin; Schoenfelder, Erin; Wolchik, Sharlene; MacKinnon, David

    2011-01-01

    This chapter reviews findings from 46 randomized experimental trials of preventive parenting interventions. The findings of these trials provide evidence of effects to prevent a wide range of problem outcomes and to promote competencies from one to twenty years later. However, there is a paucity of evidence concerning the processes that account for program effects. Three alternative pathways are proposed as a framework for future research on the long-term effects of preventive parenting progr...

  12. Image Processing of Welding Procedure Specification and Pre-process program development for Finite Element Modelling

    International Nuclear Information System (INIS)

    Kim, K. S.; Lee, H. J.

    2009-11-01

    PRE-WELD program, which generates automatically the input file for the finite element analysis on the 2D butt welding at the dissimilar metal weld part, was developed. This program is pre-process program of the FEM code for analyzing the residual stress at the welding parts. Even if the users have not the detail knowledge for the FEM modelling, the users can make the ABAQUS INPUT easily by inputting the shape data of welding part, the weld current and voltage of welding parameters. By using PRE-WELD program, we can save the time and the effort greatly for preparing the ABAQUS INPUT for the residual stress analysis at the welding parts, and make the exact input without the human error

  13. Multivariate Hawkes process models of the occurrence of regulatory elements

    DEFF Research Database (Denmark)

    Carstensen, L; Sandelin, A; Winther, Ole

    2010-01-01

    distribution of the occurrences of these TREs along the genome. RESULTS: We present a model of TRE occurrences known as the Hawkes process. We illustrate the use of this model by analyzing two different publically available data sets. We are able to model, in detail, how the occurrence of one TRE is affected....... For each of the two data sets we provide two results: first, a qualitative description of the dependencies among the occurrences of the TREs, and second, quantitative results on the favored or avoided distances between the different TREs. CONCLUSIONS: The Hawkes process is a novel way of modeling the joint...

  14. Iodox process tests in a transuranium element production campaign

    International Nuclear Information System (INIS)

    Collins, E.D.; Benker, D.E.

    1978-01-01

    The Iodox process removes gaseous iodine from air by oxidation of organic iodides and by hydrolysis-oxidation of free iodine to the stable iodate form. An Iodox system for treatment of the 10 -4 m 3 /s dissolver off-gas (DOG) stream was installed and is used for initial removal of radioiodine, this allowing the Hopcalite-charcoal to serve as a backup system in TRU. During a recent TRU production campaign, three dissolver runs were made to test the Iodox process

  15. Elements of calculation of reactivity by numerical processing

    International Nuclear Information System (INIS)

    Hedde, J.

    1968-01-01

    In order to explore the new opportunities provided by numerical techniques, the author describes the theoretical optimal conditions of a calculation in real time of reactivity from counting samples produced by a nuclear reactor. These optimal conditions can be the better approached if a more complex processing is adopted. A compromise is to be searched between the desired precision and simplicity of the numerical processing hardware. An example is reported to assess result accuracy on a wide power evolution range with a structure of reduced complexity [fr

  16. Elemental Mercury Diffusion Processes and Concentration at the Lunar Poles

    Science.gov (United States)

    Moxley, Frederick; Killen, Rosemary M.; Hurley, Dana M.

    2011-01-01

    In 2009, the Lyman Alpha Mapping Project (LAMP) spectrograph onboard the Lunar Reconnaissance Orbiter (LRO) spacecraft made the first detection of element mercury (Hg) vapor in the lunar exosphere after the Lunar Crater Observing and Sensing Satellite (LCROSS) Centaur rocket impacted into the Cabeus crater in the southern polar region of the Moon. The lunar regolith core samples from the Apollo missions determined that Hg had a devolatilized pattern with a concentration gradient increasing with depth, in addition to a layered pattern suggesting multiple episodes of burial and volatile loss. Hg migration on the lunar surface resulted in cold trapping at the poles. We have modeled the rate at which indigenous Hg is lost from the regolith through diffusion out of lunar grains. We secondly modeled the migration of Hg vapor in the exosphere and estimated the rate of cold-trapping at the poles using a Monte Carlo technique. The Hg vapor may be lost from the exosphere via ionization, Jeans escape, or re-impact into the surface causing reabsorption.

  17. Chemical and Isotopic Diversity of Organic Particles in Chondrites: Parent Body vs. Nebular Processes

    OpenAIRE

    Remusat, L.; Guan, Y.; Eiler, J. M.

    2009-01-01

    Insoluble organic matter (IOM), the main organic constituent in chondrites, has been extensively studied after HF/HCl isolation techniques. Bulk isotopic compositions and elemental ratios show variations between chondrite groups, whereas they are quite homogeneous within each class [1]. Recent isotopic measurements by ion probes have revealed that IOM is heterogeneous at the sub-micron scale [2,3]. Does this heterogeneity reflect parent body evolution or reactions in the gas...

  18. Elements of the theory of Markov processes and their applications

    CERN Document Server

    Bharucha-Reid, A T

    2010-01-01

    This graduate-level text and reference in probability, with numerous applications to several fields of science, presents nonmeasure-theoretic introduction to theory of Markov processes. The work also covers mathematical models based on the theory, employed in various applied fields. Prerequisites are a knowledge of elementary probability theory, mathematical statistics, and analysis. Appendixes. Bibliographies. 1960 edition.

  19. Parent-identified barriers to pediatric health care: a process-oriented model.

    Science.gov (United States)

    Sobo, Elisa J; Seid, Michael; Reyes Gelhard, Leticia

    2006-02-01

    To further understand barriers to care as experienced by health care consumers, and to demonstrate the importance of conjoining qualitative and quantitative health services research. Transcripts from focus groups conducted in San Diego with English- and Spanish-speaking parents of children with special health care needs. Participants were asked about the barriers to care they had experienced or perceived, and their strategies for overcoming these barriers. Using elementary anthropological discourse analysis techniques, a process-based conceptual model of the parent experience was devised. The analysis revealed a parent-motivated model of barriers to care that enriched our understanding of quantitative findings regarding the population from which the focus group sample was drawn. Parent-identified barriers were grouped into the following six temporally and spatially sequenced categories: necessary skills and prerequisites for gaining access to the system; realizing access once it is gained; front office experiences; interactions with physicians; system arbitrariness and fragmentation; outcomes that affect future interaction with the system. Key to the successful navigation of the system was parents' functional biomedical acculturation; this construct likens the biomedical health services system to a cultural system within which all parents/patients must learn to function competently. Qualitative analysis of focus group data enabled a deeper understanding of barriers to care--one that went beyond the traditional association of marker variables with poor outcomes ("what") to reveal an understanding of the processes by which parents experience the health care system ("how,"why") and by which disparities may arise. Development of such process-oriented models furthers the provision of patient-centered care and the creation of interventions, programs, and curricula to enhance such care. Qualitative discourse analysis, for example using this project's widely applicable

  20. Behavior of radioactive elements (uranium and thorium) in Bayer process

    International Nuclear Information System (INIS)

    Sato, C.; Kazama, S.; Sakamoto, A.; Hirayanagi, K.

    1986-01-01

    It is essential that alumina used for manufacturing electronic devices should contain an extremely low level of alpha-radiation. The principal source of alpha-radiation in alumina is uranium, a minor source being thorium. Uranium in bauxite dissolves into the liquor in the digestion process and is fixed to the red mud as the desilication reaction progresses. A part of uranium remaining in the liquor precipitates together with aluminum hydroxide in the precipitation process. The uranium content of aluminum hydroxide becomes lower as the precipitation velocity per unit surface area of the seed becomes slower. Organic matters in the Bayer liquor has an extremely significant impact on the uranium content of aluminum hydroxide. Aluminum hydroxide free of uranium is obtainable from the liquor that does not contain organic matters

  1. Space Station Freedom pressurized element interior design process

    Science.gov (United States)

    Hopson, George D.; Aaron, John; Grant, Richard L.

    1990-01-01

    The process used to develop the on-orbit working and living environment of the Space Station Freedom has some very unique constraints and conditions to satisfy. The goal is to provide maximum efficiency and utilization of the available space, in on-orbit, zero G conditions that establishes a comfortable, productive, and safe working environment for the crew. The Space Station Freedom on-orbit living and working space can be divided into support for three major functions: (1) operations, maintenance, and management of the station; (2) conduct of experiments, both directly in the laboratories and remotely for experiments outside the pressurized environment; and (3) crew related functions for food preparation, housekeeping, storage, personal hygiene, health maintenance, zero G environment conditioning, and individual privacy, and rest. The process used to implement these functions, the major requirements driving the design, unique considerations and constraints that influence the design, and summaries of the analysis performed to establish the current configurations are described. Sketches and pictures showing the layout and internal arrangement of the Nodes, U.S. Laboratory and Habitation modules identify the current design relationships of the common and unique station housekeeping subsystems. The crew facilities, work stations, food preparation and eating areas (galley and wardroom), and exercise/health maintenance configurations, waste management and personal hygiene area configuration are shown. U.S. Laboratory experiment facilities and maintenance work areas planned to support the wide variety and mixtures of life science and materials processing payloads are described.

  2. Boiling process in oil coolers on porous elements

    Directory of Open Access Journals (Sweden)

    Genbach Alexander A.

    2016-01-01

    Full Text Available Holography and high-speed filming were used to reveal movements and deformations of the capillary and porous material, allowing to calculate thermo-hydraulic characteristics of boiling liquid in the porous structures. These porous structures work at the joint action of capillary and mass forces, which are generalised in the form of dependences used in the calculation for oil coolers in thermal power plants (TPP. Furthermore, the mechanism of the boiling process in porous structures in the field of mass forces is explained. The development process of water steam formation in the mesh porous structures working at joint action of gravitational and capillary forces is investigated. Certain regularities pertained to the internal characteristics of boiling in cells of porous structure are revealed, by means of a holographic interferometry and high-speed filming. Formulas for calculation of specific thermal streams through thermo-hydraulic characteristics of water steam formation in mesh structures are obtained, in relation to heat engineering of thermal power plants. This is the first calculation of heat flow through the thermal-hydraulic characteristics of the boiling process in a reticulated porous structure obtained by a photo film and holographic observations.

  3. Rare earth elements in minerals of the ALHA77005 shergottite and implications for its parent magma and crystallization history

    Science.gov (United States)

    Lundberg, Laura L.; Crozaz, Ghislaine; Mcsween, Harry Y., Jr.

    1990-01-01

    Analyses of mineral REE and selected minor and trace elements were carried out on individual grains of pyroxenes, whitlockite, maskelynite, and olivine of the Antarctic shergottite ALHA77005, and the results are used to interpret its parent magma and crystallization history. The results of mineral compositions and textural observations suggest that ALHA77005 is a cumulate with about half cumulus material (olivine + chromite) and half postcumulus phases. Most of the REEs in ALHA77005 reside in whitlockite whose modal concentration is about 1 percent. Mineral REE data support previous suggestions that plagioclase and whitlockite crystallized late, and that low-Ca pyroxene initiated crystallization before high-Ca pyroxene. The REE patterns for the intercumulus liquid, calculated from distribution coefficients for ALHA77005 pyroxene, plagioclase, and whitlockite, are in very good agreement and are similar to that of Shergotty.

  4. Strategic Alliance Development - A Process Model A Case Study Integrating Elements of Strategic Alliances

    OpenAIRE

    Mohd Yunos, Mohd Bulkiah

    2007-01-01

    There has been enormous increase in the formation of strategic alliance and the research efforts devoted to understanding alliance development process over the last few decades. However, the critical elements that influence the each stage of alliance development are yet unexplored. This dissertation aims to fill this gap and to supplement it by introducing an integrated process model of strategic alliance development and its critical elements. The process model for strategic alliance developm...

  5. Culture, context and therapeutic processes: delivering a parent-child intervention in a remote Aboriginal community.

    Science.gov (United States)

    Mares, Sarah; Robinson, Gary

    2012-04-01

    Little is written about the process of delivering mainstream, evidence-based therapeutic interventions for Aboriginal children and families in remote communities. Patterns of interaction between parents and children and expectations about parenting and professional roles and responsibilities vary across cultural contexts. This can be a challenging experience for professionals accustomed to work in urban settings. Language is only a part of cultural difference, and the outsider in a therapeutic group in an Aboriginal community is outside not only in language but also in access to community relationships and a place within those relationships. This paper uses examples from Let's Start, a therapeutic parent-child intervention to describe the impact of distance, culture and relationships in a remote Aboriginal community, on the therapeutic framework, group processes and relationships. Cultural and contextual factors influence communication, relationships and group processes in a therapeutic group program for children and parents in a remote Aboriginal community. Group leaders from within and from outside the community, are likely to have complementary skills. Cultural and contextual factors influence communication, relationships and group processes in a therapeutic group program for children and parents in a remote Aboriginal community. Group leaders from within and from outside the community, are likely to have complementary skills. Program adaptation, evaluation and staff training and support need to take these factors into account to ensure cultural accessibility without loss of therapeutic fidelity and efficacy.

  6. Understanding Silence: An Investigation of the Processes of Silencing in Parent-Teacher Conferences with Somali Diaspora Parents in Danish Public Schools

    Science.gov (United States)

    Matthiesen, Noomi Christine Linde

    2016-01-01

    This article questions the dominant understanding that immigrant and refugee parents in parent-teacher conferences are silent because they come from a culture where one does not question the authority of the teacher. Instead, it is argued that they "become" silent through certain interactional processes. Building on material from an…

  7. Perspectives on the divorce process: parental perceptions of the legal system and its impact on family relations.

    Science.gov (United States)

    Pruett, M K; Jackson, T D

    2001-01-01

    Through semistructured interviews, divorcing parents provide a consumer perspective of the legal process of divorce discussed in law and mental health literature. The parents offer a heightened awareness of families' basic needs within the legal system that may otherwise be overlooked by professionals. This article focuses on narrative accounts provided by 41 divorcing parents to describe both their positive and negative experiences with the legal system and court-related professionals. Although many parents entered the divorce process with hopes for a fair and reasonable experience and outcome, only 12 percent of the parents ended the process with positive expectations. Parents conveyed feelings of a lack of power and control over divorce outcomes. The responses from parents provide valuable insight into how reforms of the legal system can be structured best to increase the quality of the process and ameliorate potentially destructive effects of divorce on the family.

  8. Presence, Mourning, and Beauty: Elements of Analytic Process.

    Science.gov (United States)

    Markman, Henry C

    2017-12-01

    Analyst and patient occasionally arrive at moments of heightened meaning and aliveness. These moments can be transformative and lead to psychic change in the patient. They give life and arouse hope, and feel "real" in a new way, though often entailing emotional turbulence. Specific internal work must be done by the analyst to allow for and foster these experiences. This involves a kind of mourning process in the analyst that allows for "presence" and "availability" as described by Gabriel Marcel, and for the "at-one-ment" described by Bion. These transforming moments can be viewed in an aesthetic realm, along the lines of Keats's "Beauty is truth, truth beauty." This embodies the analytic value of emotional truth. These moments are shared and their emergence is an intersubjective creation. Clinical illustrations show how the internal work of mourning by the analyst through directed introspection allows for presence and availability, and then for shared moments of beauty with the patient.

  9. PROCESSING OF URANIUM-METAL-CONTAINING FUEL ELEMENTS

    Science.gov (United States)

    Moore, R.H.

    1962-10-01

    A process is given for recovering uranium from neutronbombarded uranium- aluminum alloys. The alloy is dissolved in an aluminum halide--alkali metal halide mixture in which the halide is a mixture of chloride and bromide, the aluminum halide is present in about stoichiometric quantity as to uranium and fission products and the alkali metal halide in a predominant quantity; the uranium- and electropositive fission-products-containing salt phase is separated from the electronegative-containing metal phase; more aluminum halide is added to the salt phase to obtain equimolarity as to the alkali metal halide; adding an excess of aluminum metal whereby uranium metal is formed and alloyed with the excess aluminum; and separating the uranium-aluminum alloy from the fission- productscontaining salt phase. (AEC)

  10. Mechanical separation process for decladding of LWR fuel elements

    International Nuclear Information System (INIS)

    Koch, R.

    1984-10-01

    A comparison of the advantages and disadvantages of known methods of decladding led to cavitation erosion being used as a decladding mechanism. This process attacks not the jacket of the fuel rod but the fuel itself. Cavitation erosion is the consequence of imploding vapour bubbles entailing dynamic stress of a high frequency and high amplitude. The separation effect is due to the different material properties. Ductile materials as a rule are much more resistant to dynamic stress than brittle materials. Systematic experiments at varying pressures, volume flow, nozzle geometries and distances between nozzle and sample led to optimized parameters. There was a conspicuous rise in the relations pressure to depth of erosion and volume flow to depth of erosion. This considered, p=700 bar and d=1.6 mm were found to be useful parameters. The relation of the distance from nozzle to sample and the erosion obtained also has an optimum at s=50 mm. This distance can be shortened in the course of the operation. A great entrance angle combined with a nozzle outlet channel of the length l=1/2 D improves the erosion result considerably. The attack of the cavitating water jet on the jacket of the fuel rod causes a weight loss of [de

  11. 47 CFR 69.119 - Basic service element expedited approval process.

    Science.gov (United States)

    2010-10-01

    ... 47 Telecommunication 3 2010-10-01 2010-10-01 false Basic service element expedited approval process. 69.119 Section 69.119 Telecommunication FEDERAL COMMUNICATIONS COMMISSION (CONTINUED) COMMON CARRIER SERVICES (CONTINUED) ACCESS CHARGES Computation of Charges § 69.119 Basic service element...

  12. Optimization of the flexible mould process for the production of double-curved concrete elements

    NARCIS (Netherlands)

    Schipper, H.R.; Grunewald, S.; Eigenraam, P.; Raghunath, P.; Kok, M.

    2014-01-01

    Free-form buildings tend to be expensive. By optimizing the production process, economical and wellperforming concrete structures and elements can be manufactured. In this paper, an innovative method is presented that allows producing highly accurate double curved-elements without the need for

  13. Determining e-Portfolio Elements in Learning Process Using Fuzzy Delphi Analysis

    Science.gov (United States)

    Mohamad, Syamsul Nor Azlan; Embi, Mohamad Amin; Nordin, Norazah

    2015-01-01

    The present article introduces the Fuzzy Delphi method results obtained in the study on determining e-Portfolio elements in learning process for art and design context. This method bases on qualified experts that assure the validity of the collected information. In particular, the confirmation of elements is based on experts' opinion and…

  14. Increased Sensory Processing Atypicalities in Parents of Multiplex ASD Families Versus Typically Developing and Simplex ASD Families

    OpenAIRE

    Donaldson, Chelsea K.; Stauder, Johannes E. A.; Donkers, Franc C. L.

    2016-01-01

    Recent studies have suggested that sensory processing atypicalities may share genetic influences with autism spectrum disorder (ASD). To further investigate this, the adolescent/adult sensory profile (AASP) questionnaire was distributed to 85 parents of typically developing children (P-TD), 121 parents from simplex ASD families (SPX), and 54 parents from multiplex ASD families (MPX). After controlling for gender and presence of mental disorders, results showed that MPX parents significantly d...

  15. [The diagnostic process in spina bifida: parents perception and viewpoint of clinical specialists].

    Science.gov (United States)

    Herb, G; Streeck, S

    1995-01-01

    This is a study of the subjective experience of communicative understanding between parents of spina bifida children and medical personnel. Research methods include content analysis of data from semi-structured interviews, a questionnaire to explore the quality of life as well as conversation analytic reconstructions of the "real" communication processes during outpatient clinic which were tape-recorded. Results of the interviews with parents and personnel demonstrate the great relevance of the quality of the relationship in the providing of clinical care; equally important is that the relationship between parents and clinic staff is shaped in a reciprocal fashion. Discrepancies in the perceptions of parents and personnel indicate individual reality constructions. It is desirable that parents and personnel construct a shared reality during their interaction. With respect to this end, the emotional resources of personnel should be regarded as competences and drawn upon more systematically. The parents' role as "experts" should be validated and their active participation in the construction of the communicative situation - which is normally determined by the institution - should be encouraged.

  16. Incidence of Parental Support and Pressure on Their Children's Motivational Processes towards Sport Practice Regarding Gender.

    Science.gov (United States)

    Amado, Diana; Sánchez-Oliva, David; González-Ponce, Inmaculada; Pulido-González, Juan José; Sánchez-Miguel, Pedro Antonio

    2015-01-01

    Grounded in Self-Determination Theory, structural equation modeling (SEM) with the aim of examining how parental support/pressure could influence their children´s motivational processes in sport was conducted, as well as the models´ differences in operability regarding gender. The sample size was 321 children ranging in age from 10 to 16 years old who were athletes from Extremadura, and 321 parents (included only the father or mother more involved with the sport of his or her child). 175 participants were male and 146 were female from individual (n = 130), and team sports (n=191). A questionnaire was conducted to assess parental perception of support/pressure and another questionnaire was conducted to measure satisfaction of basic psychological needs, type of motivation and enjoyment/boredom showed by their children towards sport practice. Results revealed that parental pressure negatively predicted satisfaction of the basic psychological needs. It also emerged as a strong positive predictor of intrinsic motivation and negative predictor of amotivation. Moreover, intrinsic motivation emerged as positive predictor of enjoyment and a negative predictor of boredom, whereas amotivation positively predicted boredom and negatively predicted enjoyment. Furthermore, results showed there were mean differences by gender: male athletes perceived greater parental pressure. Hence, it is necessary to decrease parental pressure towards their children in sport, with the aim of making them more motivated and enjoy, promoting positive consequences.

  17. Incidence of Parental Support and Pressure on Their Children's Motivational Processes towards Sport Practice Regarding Gender.

    Directory of Open Access Journals (Sweden)

    Diana Amado

    Full Text Available Grounded in Self-Determination Theory, structural equation modeling (SEM with the aim of examining how parental support/pressure could influence their children´s motivational processes in sport was conducted, as well as the models´ differences in operability regarding gender. The sample size was 321 children ranging in age from 10 to 16 years old who were athletes from Extremadura, and 321 parents (included only the father or mother more involved with the sport of his or her child. 175 participants were male and 146 were female from individual (n = 130, and team sports (n=191. A questionnaire was conducted to assess parental perception of support/pressure and another questionnaire was conducted to measure satisfaction of basic psychological needs, type of motivation and enjoyment/boredom showed by their children towards sport practice. Results revealed that parental pressure negatively predicted satisfaction of the basic psychological needs. It also emerged as a strong positive predictor of intrinsic motivation and negative predictor of amotivation. Moreover, intrinsic motivation emerged as positive predictor of enjoyment and a negative predictor of boredom, whereas amotivation positively predicted boredom and negatively predicted enjoyment. Furthermore, results showed there were mean differences by gender: male athletes perceived greater parental pressure. Hence, it is necessary to decrease parental pressure towards their children in sport, with the aim of making them more motivated and enjoy, promoting positive consequences.

  18. Finite element simulation of dynamic wetting flows as an interface formation process

    KAUST Repository

    Sprittles, J.E.; Shikhmurzaev, Y.D.

    2013-01-01

    A mathematically challenging model of dynamic wetting as a process of interface formation has been, for the first time, fully incorporated into a numerical code based on the finite element method and applied, as a test case, to the problem

  19. A discrete element based simulation framework to investigate particulate spray deposition processes

    KAUST Repository

    Mukherjee, Debanjan; Zohdi, Tarek I.

    2015-01-01

    © 2015 Elsevier Inc. This work presents a computer simulation framework based on discrete element method to analyze manufacturing processes that comprise a loosely flowing stream of particles in a carrier fluid being deposited on a target surface

  20. Application of the dual reciprocity boundary element method for numerical modelling of solidification process

    Directory of Open Access Journals (Sweden)

    E. Majchrzak

    2008-12-01

    Full Text Available The dual reciprocity boundary element method is applied for numerical modelling of solidification process. This variant of the BEM is connected with the transformation of the domain integral to the boundary integrals. In the paper the details of the dual reciprocity boundary element method are presented and the usefulness of this approach to solidification process modelling is demonstrated. In the final part of the paper the examples of computations are shown.

  1. Process Evaluation of a Parenting Program for Low-Income Families in South Africa

    Science.gov (United States)

    Lachman, Jamie M.; Kelly, Jane; Cluver, Lucie; Ward, Catherine L.; Hutchings, Judy; Gardner, Frances

    2018-01-01

    Objective: This mixed-methods process evaluation examined the feasibility of a parenting program delivered by community facilitators to reduce the risk of child maltreatment in low-income families with children aged 3-8 years in Cape Town, South Africa (N = 68). Method: Quantitative measures included attendance registers, fidelity checklists,…

  2. Impact of the Diagnostic Process on Parents of Infants and Preschool Children. Final Report.

    Science.gov (United States)

    Tice, Terrence N.; Hanson, Janice L.

    In an investigation of the impact of the psychological/educational diagnostic process on the parents of young children at risk for developmental delay, 18 families completed questionnaires and were interviewed concerning their child's evaluation. Transcribed interviews conducted 1-2 weeks after the evaluation and 4 months after the evaluations…

  3. Analyzing empowerment oriented email consultation for parents : Development of the Guiding the Empowerment Process model

    NARCIS (Netherlands)

    dr. Christa C.C. Nieuwboer

    2014-01-01

    Background. Online consultation is increasingly offered by parenting practitioners, but it is not clear if it is feasible to provide empowerment oriented support in single session email consultation. Method. Based on empowerment theory we developed the Guiding the Empowerment Process model (GEP

  4. Factors Affecting Christian Parents' School Choice Decision Processes: A Grounded Theory Study

    Science.gov (United States)

    Prichard, Tami G.; Swezey, James A.

    2016-01-01

    This study identifies factors affecting the decision processes for school choice by Christian parents. Grounded theory design incorporated interview transcripts, field notes, and a reflective journal to analyze themes. Comparative analysis, including open, axial, and selective coding, was used to reduce the coded statements to five code families:…

  5. PGAA method for control of the technologically important elements at processing of sulfide ores

    International Nuclear Information System (INIS)

    Kurbanov, B.I.; Aripov, G.A.; Allamuratova, G.; Umaraliev, M.

    2006-01-01

    Full text: Many precious elements (Au, Re, Pt, Pd, Ag, Cu, Ni, Co, Mo) in ores mainly exist in the form of sulfide minerals and the flotation method is often used for processing of such kind of ores. To enhance the efficiency of the process it is very important to carry out the operative control of the elements of interest at various stages of ore processing. In this work the results of studies for developing methods for control of technologically important elements at processing and enrichment sulfide ores, which content the gold, copper, nickel, molybdenum in the ore-processing plants of Uzbekistan. The design of transportable experimental PGAA device on the basis of low-power radionuclide neutron source ( 252 Cf) with neutrons of 2x10 7 neutr/sec allowing to determine element content of the above named ores and their processing products is offered. It is shown that the use of the thermal neutron capture gamma-ray spectrometry in real samples and technological products allows prompt determination of such elements as S, Cu, Ti and others, which are important for flotation of sulfide ores. Efficiency control of the flotation processing of sulfide ores is based on quick determination of the content of sulfur and some other important elements at different stages of the process. It was found that to determine elements the following gamma lines are the most suitable - 840.3 keV for sulfur, 609 keV and 7307 keV for copper and 1381.5 keV, 1498.3 keV and 1585.3 keV for titanium. Based on the measurements of original ores, concentrates of various stages of flotation and flotation slime the possibility for prompt determination of S, Cu and Ti content and thus to get necessary information on the efficiency of the flotation process was shown. (author)

  6. The AMBRE Project: r-process element abundances in the Milky Way thin and thick discs

    Science.gov (United States)

    Guiglion, Guillaume; de Laverny, Patrick; Recio-Blanco, Alejandra; Worley, C. Clare

    2018-04-01

    Chemical evolution of r-process elements in the Milky Way disc is still a matter of debate. We took advantage of high resolution HARPS spectra from the ESO archive in order to derive precise chemical abundances of 3 r-process elements Eu, Dy & Gd for a sample of 4 355 FGK Milky Way stars. The chemical analysis has been performed thanks to the automatic optimization pipeline GAUGUIN. Based on the [α/Fe] ratio, we chemically characterized the thin and the thick discs, and present here results of these 3 r-process element abundances in both discs. We found an unexpected Gadolinium and Dysprosium enrichment in the thick disc stars compared to Europium, while these three elements track well each other in the thin disc.

  7. Concentration and distribution of elements in plants and soils near phosphate processing factories, Pocatello, Idaho

    International Nuclear Information System (INIS)

    Severson, R.C.; Gough, L.P.

    1976-01-01

    The processing of phosphatic shale near Pocatello, Idaho has a direct influence on the element content of local vegetation and soil. Samples of big sagebrush (Artemisia tridentata Nutt. subsp. tridentata) and cheatgrass (Bromus tectorum L.) show important negative relations between the concentration of certain elements (Cd, Cr, F, Ni, P, Se, U, V, and Zn) and distance from phosphate processing factories. Plant tissues within 3 km of the processing factories contain unusually high amounts of these elements except Ni and Se. Important negative relations with distance were also found for certain elements (Be, F, Fe, K, Li, Pb, Rb, Th, and Zn) in A-horizon soil. Amounts of seven elements (Be, F, Li, Pb, Rb, Th, and Zn) being contributed to the upper 5 cm of the soil by phosphate processing, as well as two additional elements (U and V) suspected as being contributed to soil, were estimated, with F showing the greatest increase (about 300 kg/ha) added to soils as far as 4 km downwind from the factories. The greatest number of important relations for both plants and soils was found downwind (northeast) of the processing factories

  8. Effect of microbial processes on transuranium elements behaviour in soil, plants and animal organism

    International Nuclear Information System (INIS)

    Uajldung, R.Eh.; Garlend, T.P.

    1985-01-01

    Results of preliminary studies discussed in the present paper bring about the supposition that concentration and chemical from of an element in a plant play an essential role in variation of its availability for animals consuming plants. That is why any assessment of long-term behaviour of transuranium elements in terrestrialenvironment should be based on determination of factors affecting solubility and forms of soluble compounds in soil. These factors include concentration and chemical form of the element migrating to soil; effect of the properties of soil on element distribution between solid and liquid phases; effect soil processes on kinetics of sorption reactions, concentration of transuranium elements, forms of soluble and non-soluble chemical compounds

  9. The Impact of Social Class on Parent-Professional Interaction in School Exclusion Processes: Deficit or Disadvantage?

    Science.gov (United States)

    Gazeley, Louise

    2012-01-01

    Although a great deal of previous literature has explored the ways in which social class affects parental engagement in educational processes, there has been surprisingly little discussion of the way in which social class shapes the parent-professional interaction that occurs in school exclusion processes specifically. School exclusion processes…

  10. Finite element modelling of creep process - steady state stresses and strains

    Directory of Open Access Journals (Sweden)

    Sedmak Aleksandar S.

    2014-01-01

    Full Text Available Finite element modelling of steady state creep process has been described. Using an analogy of visco-plastic problem with a described procedure, the finite element method has been used to calculate steady state stresses and strains in 2D problems. An example of application of such a procedure have been presented, using real life problem - cylindrical pipe with longitudinal crack at high temperature, under internal pressure, and estimating its residual life, based on the C*integral evaluation.

  11. Cost model relationships between textile manufacturing processes and design details for transport fuselage elements

    Science.gov (United States)

    Metschan, Stephen L.; Wilden, Kurtis S.; Sharpless, Garrett C.; Andelman, Rich M.

    1993-01-01

    Textile manufacturing processes offer potential cost and weight advantages over traditional composite materials and processes for transport fuselage elements. In the current study, design cost modeling relationships between textile processes and element design details were developed. Such relationships are expected to help future aircraft designers to make timely decisions on the effect of design details and overall configurations on textile fabrication costs. The fundamental advantage of a design cost model is to insure that the element design is cost effective for the intended process. Trade studies on the effects of processing parameters also help to optimize the manufacturing steps for a particular structural element. Two methods of analyzing design detail/process cost relationships developed for the design cost model were pursued in the current study. The first makes use of existing databases and alternative cost modeling methods (e.g. detailed estimating). The second compares design cost model predictions with data collected during the fabrication of seven foot circumferential frames for ATCAS crown test panels. The process used in this case involves 2D dry braiding and resin transfer molding of curved 'J' cross section frame members having design details characteristic of the baseline ATCAS crown design.

  12. Multivariate Models of Parent-Late Adolescent Gender Dyads: The Importance of Parenting Processes in Predicting Adjustment

    Science.gov (United States)

    McKinney, Cliff; Renk, Kimberly

    2008-01-01

    Although parent-adolescent interactions have been examined, relevant variables have not been integrated into a multivariate model. As a result, this study examined a multivariate model of parent-late adolescent gender dyads in an attempt to capture important predictors in late adolescents' important and unique transition to adulthood. The sample…

  13. The combined impact of vineyard origin and processing winery on the elemental profile of red wines.

    Science.gov (United States)

    Hopfer, Helene; Nelson, Jenny; Collins, Thomas S; Heymann, Hildegarde; Ebeler, Susan E

    2015-04-01

    The combined effects of vineyard origin and winery processing have been studied in 65 red wines samples. Grapes originating from five different vineyards within 40 miles of each other were processed in at least two different wineries. Sixty-three different elements were determined with inductively coupled-plasma mass spectrometry (ICP-MS), and wines were classified according to vineyard origin, processing winery, and the combination of both factors. Vineyard origin as well as winery processing have an impact on the elemental composition of wine, but each winery and each vineyard change the composition to a different degree. For some vineyards, wines showed a characteristic elemental pattern, independent of the processing winery, but the same was found for some wineries, with similar elemental pattern for all grapes processed in these wineries, independent of the vineyard origin. Studying the combined effects of grapegrowing and winemaking provides insight into the determination of geographical origin of red wines. Copyright © 2014 Elsevier Ltd. All rights reserved.

  14. Parent and Family Processes Related to ADHD Management in Ethnically Diverse Youth.

    Science.gov (United States)

    Paidipati, Cynthia P; Brawner, Bridgette; Eiraldi, Ricardo; Deatrick, Janet A

    Previous research has shown major disparities in attention deficit hyperactivity disorder (ADHD) for diverse youth across America. We do not fully understand, however, how parent and family processes are related to the identification, care-seeking approaches, treatment preferences, and engagement with care systems and services for youth with ADHD. The present study aimed to explore parent and family processes related to the management of ADHD in racially and ethnically diverse youth. This integrative review was structured with the methodology proposed by Whittemore and Knafl. Three major electronic databases yielded a final sample of 32 articles (24 quantitative, 6 qualitative, and 2 mixed methods). Nine themes emerged within three overarching meta-themes. Understanding the unique perspectives of families from diverse backgrounds is essential for clinicians, researchers, and policymakers, who are dedicated to understanding racial and ethnic perspectives and developing ecologically appropriate and family-based interventions for youth with ADHD.

  15. Harsh, inconsistent parental discipline and romantic relationships: mediating processes of behavioral problems and ambivalence.

    Science.gov (United States)

    Surjadi, Florensia F; Lorenz, Frederick O; Conger, Rand D; Wickrama, K A S

    2013-10-01

    According to the Development of Early Adult Romantic Relationships (DEARR) model (Bryant, C. M., & Conger, R. D. [2002]. Conger, R. D., Cui, M., Bryant, C. M., & Elder, G. H., Jr. [2000] interactional characteristics in the family of origin influence early adult romantic relationships by promoting or inhibiting the development of interpersonal competencies that contribute to relationship success in young adulthood. The present study uses the DEARR model as a general framework to help examine the long-term link between parental discipline practices in adolescence and young adult's interactions in the early years of marriage or cohabitation. Using prospective data from 288 target participants, their families, and their romantic partner, beginning when the targets were adolescents and continuing up to the fifth year of their marital or cohabiting relationships, we found empirical support for the DEARR model. Parental discipline practices in adolescence were associated with romantic relationship quality during the early years of marriage or cohabitation through processes in late adolescence and young adulthood. Specifically, harsh and inconsistent discipline practices were associated with greater attitudinal ambivalence toward parents in adolescence. Inconsistent discipline was also associated with higher risks of externalizing problems during late adolescence years. Externalizing problems and ambivalence toward parents predicted poorer relationship quality through aggressive behaviors and ambivalence toward a romantic partner during the early years of marriage or cohabitation. Implications for practitioners working with couples and families are discussed.

  16. Finite Element Simulation of Sheet Metal Forming Process Using Local Interpolation for Tool Surfaces

    International Nuclear Information System (INIS)

    Hama, Takayuki; Takuda, Hirohiko; Takamura, Masato; Makinouchi, Akitake; Teodosiu, Cristian

    2005-01-01

    Treatment of contact between a sheet and tools is one of the most difficult problems to deal with in finite-element simulations of sheet forming processes. In order to obtain more accurate tool models without increasing the number of elements, this paper describes a new formulation for contact problems using interpolation proposed by Nagata for tool surfaces. A contact search algorithm between sheet nodes and the interpolated tool surfaces was developed and was introduced into the static-explicit elastoplastic finite-element method code STAMP3D. Simulations of a square cup deep drawing process with a very coarsely discretized punch model were carried out. The simulated results showed that the proposed algorithm gave the proper drawn shape, demonstrating the validity of the proposed algorithm

  17. Constructing large scale SCI-based processing systems by switch elements

    International Nuclear Information System (INIS)

    Wu, B.; Kristiansen, E.; Skaali, B.; Bogaerts, A.; Divia, R.; Mueller, H.

    1993-05-01

    The goal of this paper is to study some of the design criteria for the switch elements to form the interconnection of large scale SCI-based processing systems. The approved IEEE standard 1596 makes it possible to couple up to 64K nodes together. In order to connect thousands of nodes to construct large scale SCI-based processing systems, one has to interconnect these nodes by switch elements to form different topologies. A summary of the requirements and key points of interconnection networks and switches is presented. Two models of the SCI switch elements are proposed. The authors investigate several examples of systems constructed for 4-switches with simulations and the results are analyzed. Some issues and enhancements are discussed to provide the ideas behind the switch design that can improve performance and reduce latency. 29 refs., 11 figs., 3 tabs

  18. Source/process apportionment of major and trace elements in sinking particles in the Sargasso sea

    Science.gov (United States)

    Huang, S.; Conte, M. H.

    2009-01-01

    Elemental composition of the particle flux at the Oceanic Flux Program (OFP) time-series site off Bermuda was measured from January 2002 to March 2005. Eighteen elements (Mg, Al, Si, P, Ca, Sc, Ti, V, Mn, Fe, Co, Ni, Cu, Zn, Sr, Cd, Ba and Pb) in sediment trap material from 500, 1500 and 3200 m depths were quantified using fusion-HR-ICPMS. Positive Matrix Factorization (PMF) was used to elucidate sources, elemental associations and processes that affect geochemical behavior in the water column. Results provide evidence for intense elemental cycling between the sinking flux material and the dissolved and suspended pools within mesopelagic and bathypelagic waters. Biological processing and remineralization rapidly deplete the sinking flux material in organic matter and associated elements (N, P, Cd, Zn) between 500 and 1500 m depth. Suspended particle aggregation, authigenic mineral precipitation, and chemical scavenging enriches the flux material in lithogenic minerals, barite and redox sensitive elements (Mn, Co, V, Fe). A large increase in the flux of lithogenic elements is observed with depth and confirms that the northeast Sargasso is a significant sink for advected continental materials, likely supplied via Gulf Stream circulation. PMF resolved major sources that contribute to sinking flux at all depths (carbonate, high-Mg carbonate, opal, organic matter, lithogenic material, and barite) as well as additional depth-specific elemental associations that contribute about half of the compositional variability in the flux. PMF solutions indicate close geochemical associations of barite-opal, Cd-P, Zn-Co, Zn-Pb and redox sensitive elements in the sinking flux material at 500 m depth. Major reorganizations of element associations occur as labile carrier phases break down and elements redistribute among new carrier phases deeper in the water column. Factor scores show strong covariation and similar temporal phasing among the three trap depths and indicate a tight

  19. Heterogeneity and loss of soil nutrient elements under aeolian processes in the Otindag Desert, China

    Science.gov (United States)

    Li, Danfeng; Wang, Xunming; Lou, Junpeng; Liu, Wenbin; Li, Hui; Ma, Wenyong; Jiao, Linlin

    2018-02-01

    The heterogeneity of the composition of surface soils that are affected by aeolian processes plays important roles in ecological evolution and the occurrence of aeolian desertification in fragile ecological zones, but the associated mechanisms are poorly understood. Using field investigation, wind tunnel experiments, and particle size and element analyses, we discuss the variation in the nutrient elements of surface soils that forms in the presence of aeolian processes of four vegetation species (Caragana microphylla Lam, Artemisia frigida Willd. Sp. Pl., Leymus chinensis (Trin.) Tzvel. and Stipa grandis P. Smirn) growing in the Otindag Desert, China. These four vegetation communities correspond to increasing degrees of degradation. A total of 40 macro elements, trace elements, and oxides were measured in the surface soil and in wind-transported samples. The results showed that under the different degradation stages, the compositions and concentrations of nutrients in surface soils differed for the four vegetation species. Aeolian processes may cause higher heterogeneity and higher loss of soil nutrient elements for the communities of Artemisia frigida Willd. Sp. Pl., Leymus chinensis (Trin.) Tzvel, and Stipa grandis P. Smirn than for the Caragana microphylla Lam community. There was remarkable variation in the loss of nutrients under different aeolian transportation processes. Over the past several decades, the highest loss of soil elements occurred in the 1970s, whereas the loss from 2011 to the present was generally 4.0% of that in the 1970s. These results indicate that the evident decrease in nutrient loss has played an important role in the rehabilitation that has occurred in the region recently.

  20. A Model of Family Background, Family Process, Youth Self-Control, and Delinquent Behavior in Two-Parent Families

    Science.gov (United States)

    Jeong, So-Hee; Eamon, Mary Keegan

    2009-01-01

    Using data from a national sample of two-parent families with 11- and 12-year-old youths (N = 591), we tested a structural model of family background, family process (marital conflict and parenting), youth self-control, and delinquency four years later. Consistent with the conceptual model, marital conflict and youth self-control are directly…

  1. The Broader Cognitive Phenotype of Autism in Parents: How Specific Is the Tendency for Local Processing and Executive Dysfunction?

    Science.gov (United States)

    Bolte, Sven; Poustka, Fritz

    2006-01-01

    Background: The objective of this study was to investigate the tendency for local processing style ("weak central coherence") and executive dysfunction in parents of subjects with an autism spectrum disorder (ASD) compared with parents of individuals with early onset schizophrenia (EOS) and mental retardation (MR). Method: Sixty-two…

  2. Increased Sensory Processing Atypicalities in Parents of Multiplex ASD Families versus Typically Developing and Simplex ASD Families

    Science.gov (United States)

    Donaldson, Chelsea K.; Stauder, Johannes E. A.; Donkers, Franc C. L.

    2017-01-01

    Recent studies have suggested that sensory processing atypicalities may share genetic influences with autism spectrum disorder (ASD). To further investigate this, the adolescent/adult sensory profile (AASP) questionnaire was distributed to 85 parents of typically developing children (P-TD), 121 parents from simplex ASD families (SPX), and 54…

  3. Influence of near-edge processes in the elemental analysis using X

    Indian Academy of Sciences (India)

    The near-edge processes, such as X-ray absorption fine structure (XAFS) andresonant ... away from the shell/subshell ionization thresholds of the attenuator element. ... The influence of XAFS to the attenuation coefficient depends upon the ...

  4. Can We Fix This? Parent-Child Repair Processes and Preschoolers' Regulatory Skills.

    Science.gov (United States)

    Kemp, Christine J; Lunkenheimer, Erika; Albrecht, Erin C; Chen, Deborah

    2016-10-01

    The repair of difficult parent-child interactions is a marker of healthy functioning in infancy, but less is known about repair processes during early childhood. We used dynamic systems methods to investigate dyadic repair in mothers and their 3-year-old children ( N = 96) and its prediction of children's emotion regulation and behavior problems at a four-month follow-up. Mothers and children completed free play and challenging puzzle tasks. Repair was operationalized as the conditional probability of moving into a dyadic adaptive behavior region after individual or dyadic maladaptive behavior (e.g., child noncompliance, parental criticism). Overall, dyads repaired approximately half their maladaptive behaviors. A greater likelihood of repair during the puzzle task predicted better child emotion regulation and fewer behavior problems in preschool. Results suggest dyadic repair is an important process in early childhood and provide further evidence for the connection between parent-child coregulation and children's developing regulatory capacities. Implications for family-based interventions are discussed.

  5. ENRICHMENT OF r-PROCESS ELEMENTS IN DWARF SPHEROIDAL GALAXIES IN CHEMO-DYNAMICAL EVOLUTION MODEL

    Energy Technology Data Exchange (ETDEWEB)

    Hirai, Yutaka; Kajino, Toshitaka [Department of Astronomy, Graduate School of Science, the University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-0033 (Japan); Ishimaru, Yuhri [Department of Material Science,International Christian University, 3-10-2 Osawa, Mitaka, Tokyo 181-8585 (Japan); Saitoh, Takayuki R. [Earth-Life Science Institute, Tokyo Institute of Technology, 2-12-1 Ookayama, Meguro-ku, Tokyo 152-8551 (Japan); Fujii, Michiko S.; Hidaka, Jun, E-mail: yutaka.hirai@nao.ac.jp [Division of Theoretical Astronomy, National Astronomical Observatory of Japan, 2-21-1 Osawa Mitaka, Tokyo 181-8588 (Japan)

    2015-11-20

    The rapid neutron-capture process (r-process) is a major process for the synthesis of elements heavier than iron-peak elements, but the astrophysical site(s) of the r-process has not yet been identified. Neutron star mergers (NSMs) are suggested to be a major r-process site according to nucleosynthesis studies. Previous chemical evolution studies, however, required unlikely short merger times of NSMs to reproduce the observed large star-to-star scatters in the abundance ratios of r-process elements to iron: the [Eu/Fe] of extremely metal-poor stars in the Milky Way (MW) halo. This problem can be solved by considering chemical evolution in dwarf spheroidal galaxies (dSphs), which would be building blocks of the MW and have lower star formation efficiencies than the MW halo. We demonstrate the enrichment of r-process elements in dSphs by NSMs using an N-body/smoothed particle hydrodynamics code. Our high-resolution model reproduces the observed [Eu/Fe] due to NSMs with a merger time of 100 Myr when the effect of metal mixing is taken into account. This is because metallicity is not correlated with time ∼300 Myr from the start of the simulation due to the low star formation efficiency in dSphs. We also confirm that this model is consistent with observed properties of dSphs such as radial profiles and metallicity distribution. The merger time and the Galactic rate of NSMs are suggested to be ≲300 Myr and ∼10{sup −4} year{sup −1}, respectively, which are consistent with the values suggested by population synthesis and nucleosynthesis studies. This study supports the argument that NSMs are the major astrophysical site of the r-process.

  6. Dynamics of chemical elements in the fermentation process of ethanol production

    International Nuclear Information System (INIS)

    Nepomuceno, N.; Fernandes, E.A.N.; Bacchi, M.A.

    1997-01-01

    Brazil has become the largest producer of biomass ethanol derived from sugar cane. The industrial production is based on the fermentation of sugar cane juice by yeast, inside of large volume vats, in a fed-batch process that recycles yeast cells. To study the dynamics of chemical elements in each operating cycle, five stages of the fermentation process were considered: must, yeast suspension, wine, non-yeast wine and yeast cream. For this, a mass balance of the terrigenous elements, Ce, Co, Cs, Eu, Fe, Hf, La, Na, Sc, Sm, and Th, and the sugar cane plant elements, Br, K, Rb, and Zn, were established in fermentation vats of an industrial scale unit, with sampling undertaken during different climatic conditions (dry and rainy periods). A similar distribution of the sugar cane characteristics elements was found for the stages analysed, while for the terrigenous elements a trend of accumulation in the yeast cream was observed. Preferential absorption of Br, K, Rb, and Zn by yeast cells was indicated by the smaller concentrations observed in yeast suspension than in yeast cream. (author)

  7. A phenomenologic investigation of pediatric residents' experiences being parented and giving parenting advice.

    Science.gov (United States)

    Bax, A C; Shawler, P M; Blackmon, D L; DeGrace, E W; Wolraich, M L

    2016-09-01

    Factors surrounding pediatricians' parenting advice and training on parenting during residency have not been well studied. The primary purpose of this study was to examine pediatric residents' self-reported experiences giving parenting advice and explore the relationship between parenting advice given and types of parenting residents received as children. Thirteen OUHSC pediatric residents were individually interviewed to examine experiences being parented and giving parenting advice. Phenomenological methods were used to explicate themes and secondary analyses explored relationships of findings based upon Baumrind's parenting styles (authoritative, authoritarian, permissive). While childhood experiences were not specifically correlated to the parenting advice style of pediatric residents interviewed, virtually all reported relying upon childhood experiences to generate their advice. Those describing authoritative parents reported giving more authoritative advice while others reported more variable advice. Core interview themes related to residents' parenting advice included anxiety about not being a parent, varying advice based on families' needs, and emphasis of positive interactions and consistency. Themes related to how residents were parented included discipline being a learning process for their parents and recalling that their parents always had expectations, yet always loved them. Pediatric residents interviewed reported giving family centered parenting advice with elements of positive interactions and consistency, but interviews highlighted many areas of apprehension residents have around giving parenting advice. Our study suggests that pediatric residents may benefit from more general educational opportunities to develop the content of their parenting advice, including reflecting on any impact from their own upbringing.

  8. Functional priorities reported by parents of children with cerebral palsy: contribution to the pediatric rehabilitation process

    Directory of Open Access Journals (Sweden)

    Marina B. Brandão

    2014-12-01

    Full Text Available Background: Collaborative actions between family and therapist are essential to the rehabilitation process, and they can be a catalyst mechanism to the positive outcomes in children with cerebral palsy (CP. Objectives: To describe functional priorities established by caregivers of CP children by level of severity and age, and to assess changes on performance and satisfaction on functional priorities reported by caregivers, in 6-month interval. Method: 75 CP children, weekly assisted at Associação Mineira de Reabilitação, on physical and occupational therapy services. The following information was collected: gross motor function (Gross Motor Function Classification System-GMFCS and functional priorities established by caregivers (Canadian Occupational Performance Measure-COPM. Data were collected in two moments, with a 6-month interval. Results: The main functional demands presented by caregivers were related to self-care activities (48.2%. Parents of children with severe motor impairment (GMFCS V pointed higher number of demands related to play (p=0.0036, compared to the other severity levels. Parents of younger children reported higher number of demands in mobility (p=0.025 and play (p=0.007, compared to other age groups. After 6 months, there were significant increase on COPM performance (p=0.0001 and satisfaction scores (p=0.0001. Conclusions: Parents of CP children identified functional priorities in similar performance domains, by level of severity and age. Orienting the pediatric rehabilitation process to promote changes in functional priorities indentified by caregivers can contribute to the reinforcement of the parent-therapist collaboration.

  9. High speed vision processor with reconfigurable processing element array based on full-custom distributed memory

    Science.gov (United States)

    Chen, Zhe; Yang, Jie; Shi, Cong; Qin, Qi; Liu, Liyuan; Wu, Nanjian

    2016-04-01

    In this paper, a hybrid vision processor based on a compact full-custom distributed memory for near-sensor high-speed image processing is proposed. The proposed processor consists of a reconfigurable processing element (PE) array, a row processor (RP) array, and a dual-core microprocessor. The PE array includes two-dimensional processing elements with a compact full-custom distributed memory. It supports real-time reconfiguration between the PE array and the self-organized map (SOM) neural network. The vision processor is fabricated using a 0.18 µm CMOS technology. The circuit area of the distributed memory is reduced markedly into 1/3 of that of the conventional memory so that the circuit area of the vision processor is reduced by 44.2%. Experimental results demonstrate that the proposed design achieves correct functions.

  10. Transplutonium elements production program: extraction chromatographic process for plutonium irradiated targets

    International Nuclear Information System (INIS)

    Bourges, J.; Madic, C.; Koehly, G.

    1980-01-01

    The treatment of irradiated plutonium targets by extraction chromatography allowed the purification of the isotopes 243 Am and 244 Cm on the scale of few tens of grams. This process proved to be extremely simple and flexible, and yielded results which are reproducible in time. The chief advantage of the TBP process over the HDEHP process in high and medium activity conditions lies in the rapid absorption/desorption kinetics of the elements to be purified and in the separation of americium from curium, which largely offsets its lower selectivity for lanthanide elements. it is certainly possible to improve the performance of this process by: a) optimization of the characteristics of the stationary phase, b) improvement in the filling technique and in hydraulic operation of the columns, c) on-line analysis of americium (the key element in actinide/lanthanide separation) in the eluate. The application of extraction chromatography with HD(DiBM)P to the purification of 243 Am of the end of treatment makes the process more consistent, eliminates the delicate stages implemented in hot cell, and considerably improves final product quality

  11. Spectral evidence for amorphous silicates in least-processed CO meteorites and their parent bodies

    Science.gov (United States)

    McAdam, Margaret M.; Sunshine, Jessica M.; Howard, Kieren T.; Alexander, Conel M.; McCoy, Timothy J.; Bus, Schelte J.

    2018-05-01

    Least-processed carbonaceous chondrites (carbonaceous chondrites that have experienced minimal aqueous alteration and thermal metamorphism) are characterized by their predominately amorphous iron-rich silicate interchondrule matrices and chondrule rims. This material is highly susceptible to destruction by the parent body processes of thermal metamorphism or aqueous alteration. The presence of abundant amorphous material in a meteorite indicates that the parent body, or at least a region of the parent body, experienced minimal processing since the time of accretion. The CO chemical group of carbonaceous chondrites has a significant number of these least-processed samples. We present visible/near-infrared and mid-infrared spectra of eight least-processed CO meteorites (petrologic type 3.0-3.1). In the visible/near-infrared, these COs are characterized by a broad weak feature that was first observed by Cloutis et al. (2012) to be at 1.3-μm and attributed to iron-rich amorphous silicate matrix materials. This feature is observed to be centered at 1.4-μm for terrestrially unweathered, least-processed CO meteorites. At mid-infrared wavelengths, a 21-μm feature, consistent with Si-O vibrations of amorphous materials and glasses, is also present. The spectral features of iron-rich amorphous silicate matrix are absent in both the near- and mid-infrared spectra of higher metamorphic grade COs because this material has recrystallized as crystalline olivine. Furthermore, spectra of least-processed primitive meteorites from other chemical groups (CRs, MET 00426 and QUE 99177, and C2-ungrouped Acfer 094), also exhibit a 21-μm feature. Thus, we conclude that the 1.4- and 21-μm features are characteristic of primitive least-processed meteorites from all chemical groups of carbonaceous chondrites. Finally, we present an IRTF + SPeX observation of asteroid (93) Minerva that has spectral similarities in the visible/near-infrared to the least-processed CO carbonaceous chondrites

  12. Astrophysical site(s of r-process elements in galactic chemodynamical evolution model

    Directory of Open Access Journals (Sweden)

    Hirai Yutaka

    2016-01-01

    Full Text Available Astrophysical site(s of rapid neutron-capture process (r-process is (are not identified yet. Although core-collapse supernovae have been regarded as one of the possible candidates of the astrophysical site of r-process, nucleosynthesis studies suggest that serious difficulties in core-collapse supernovae to produce heavy elements with mass number of ≳110. Recent studies show that neutron star mergers (NSMs can synthesize these elements due to their neutron rich environment. Some chemical evolution studies of the Milky Way halo, however, hardly reproduce the observed star-to-star scatters of the abundance ratios of r-process elements (e.g., Eu in extremely metal-poor stars. This is because of their low rate (∼ 10−4 yr−1 for a Milky Way size galaxy and long merger time (≳ 100 Myr. This problem might be solved if the stars in the Galactic halo are consisted of the stars formed in dwarf galaxies where the star formation efficiencies were very low. In this study, we carry out numerical simulations of galactic chemo-dynamical evolution using an N-body/smoothed particle hydrodynamics code. We construct detailed chemo-dynamical evolution model for the Local Group dwarf spheroidal galaxies (dSphs assuming that the NSMs are the major source of r-process elements. Our models successfully reproduce the observed dispersion in [Eu/Fe] as a function of [Fe/H] if we set merger time of NSMs, ≲ 300 Myr with the Galactic NSM rate of ∼ 10−4 yr−1. In addition, our results are consistent with the observed metallicity distribution of dSphs. In the early phase (≲1 Gyr of galaxy evolution is constant due to low star formation efficiency of dSphs. This study supports the idea that NSMs are the major site of r-process nucleosynthesis.

  13. Towards a culturally independent participatory design method: Fusing game elements into the design process

    DEFF Research Database (Denmark)

    Jensen, Mika Yasuoka; Nakatani, Momoko; Ohno, Takehiko

    2013-01-01

    Historically, Participatory Design (PD) was introduced and applied in the Scandinavian and American context as a practical design method for collective creativity and stakeholder involvement. In this paper, by fusing game elements into PD, we suggest a first step towards a culturally independent ...... imply that the introduction of game elements allows PD to be effectively utilized in culturally diverse settings.......Historically, Participatory Design (PD) was introduced and applied in the Scandinavian and American context as a practical design method for collective creativity and stakeholder involvement. In this paper, by fusing game elements into PD, we suggest a first step towards a culturally independent PD...... method called the ICT Service Design Game to ease the prevailing concern that PD has limited applicability in other cultural settings. We conduct four experiments on ICT Service Design Game in Scandinavia and Asia to evaluate its feasibility. The experiments identify some differences in the PD process...

  14. Analysis of technology and quality control the fuel elements production process

    International Nuclear Information System (INIS)

    Katanic, J.; Spasic, Z.; Momcilovic, I.

    1976-01-01

    Recently great attention has been paid at the international level to the analysis of production processes and quality control of fuel elements with the aim to speed up activity of proposing and accepting standards and measurement methods. IAEA also devoted great interest to these problems appealing to more active participation of all users and procedures of fuel elements in a general effort to secure successful work with nuclear plants. For adequate and timely participation in future of the establishment and analysis of general requirements and documentation for the control of purchased or self produced fuel elements in our country, it is necessary to be well informed and to follow this activity at the international level

  15. Parents dealing with their child's diagnosis of cerebral palsy and drawing up an asistence programme for parents

    OpenAIRE

    Pajnkiher, Simona

    2017-01-01

    Researching and determining the processes of parents dealing with their child's diagnosis of cerebral palsy is an important element in providing appropriate assistance and support to parents and to the whole family of a child with cerebral palsy. By identifying the process characteristics, which most parents go through, faced with newly diagnosed cerebral palsy of a child, we can better understand the situation of the parents, the impact on them and on the whole family of the child with cereb...

  16. Mechanohydrogen processing as an element of hydrogen process of production of titanium alloy parts

    International Nuclear Information System (INIS)

    Egorova, Yu.B.; Il'in, A.A.; Levochkin, A.A.

    2002-01-01

    The regularities of the effect of hydrogen on cutting machinability of titanium alloys are generalized. The main principles of mechanohydrogen treatment are founded. The effectiveness of titanium alloys machining with the use of reversible hydrogen alloying depends on hydrogen content, hydrogen pickup temperature and cutting modes. High-performance technological processes of manufacturing parts and constructions made of titanium alloys are proposed [ru

  17. Parent-child coregulation of parasympathetic processes varies by social context and risk for psychopathology.

    Science.gov (United States)

    Lunkenheimer, Erika; Tiberio, Stacey S; Skoranski, Amanda M; Buss, Kristin A; Cole, Pamela M

    2018-02-01

    The parasympathetic nervous system supports social interaction and varies in relation to psychopathology. However, we know little about parasympathetic processes from a dyadic framework, nor in early childhood when parent-child social interactions become more complex and child psychopathology first emerges. We hypothesized that higher risk for psychopathology (maternal psychopathology symptoms and child problem behavior) would be related to weaker concordance of respiratory sinus arrhythmia (RSA) between mothers and children (M = 3½ years old; N = 47) and that these relations could vary by social contextual demands, comparing unstructured free play, semistructured cleanup, and structured teaching tasks. Multilevel coupled autoregressive models of RSA during parent-child interactions showed overall dynamic, positive concordance in mother-child RSA over time, but this concordance was weaker during the more structured teaching task. In contrast, higher maternal psychological aggression and child externalizing and internalizing problems were associated with weaker dyadic RSA concordance, which was weakest during unstructured free play. Higher maternal depressive symptoms were related to disrupted individual mother and child RSA but not to RSA concordance. Thus, risk for psychopathology was generally related to weaker dyadic mother-child RSA concordance in contexts with less complex structure or demands (free play, cleanup), as compared to the structured teaching task that showed weaker RSA concordance for all dyads. Implications for the meaning and utility of the construct of parent-child physiological coregulation are discussed. © 2017 Society for Psychophysiological Research.

  18. Mapping Cardiac Physiology and Parenting Processes in Maltreating Mother–Child Dyads

    Science.gov (United States)

    Skowron, Elizabeth A.; Loke, Eric; Gatzke-Kopp, Lisa M.; Cipriano-Essel, Elizabeth A.; Woehrle, Petra L.; Van Epps, John J.; Gowda, Anjali; Ammerman, Robert T.

    2013-01-01

    Child maltreatment (CM) lies on an extreme end of the continuum of parenting-at-risk, and while CM has been linked with a variety of behavioral indicators of dysregulation in children, less is known about how physiological markers of regulatory capacity contribute to this association. The present study examined patterns of mother and child physiological regulation and their relations with observed differences in parenting processes during a structured interaction. Abusing, neglecting, and non-CM mothers and their 3- to 5-year-old children completed a resting baseline and moderately challenging joint task. The structural analysis of social behavior was used to code mother–child interactions while simultaneous measures of respiratory sinus arrhythmia were obtained. Results indicated that physically abusive mothers were more likely to react to children’s positive bids for autonomy with strict and hostile control, than either neglecting or non-CM mothers. CM exposure and quality of maternal responding to children’s autonomous bids were uniquely associated with lower parasympathetic tone in children. Results provide evidence of neurodevelopmental associations between early CM exposure, the immediate interactive context of parenting, and children’s autonomic physiology. PMID:21842991

  19. Trace and major element pollution originating from coal ash suspension and transport processes.

    Science.gov (United States)

    Popovic, A; Djordjevic, D; Polic, P

    2001-04-01

    Coal ash obtained by coal combustion in the "Nikola Tesla A" power plant in Obrenovac, near Belgrade, Yugoslavia, is mixed with water of the Sava river and transported to the dump. In order to assess pollution caused by leaching of some minor and major elements during ash transport through the pipeline, two sets of samples (six samples each) were subjected to a modified sequential extraction. The first set consisted of coal ash samples taken immediately after combustion, while the second set was obtained by extraction with river water, imitating the processes that occur in the pipeline. Samples were extracted consecutively with distilled water and a 1 M solution of KCl, pH 7, and the differences in extractability were compared in order to predict potential pollution. Considering concentrations of seven trace elements as well as five major elements in extracts from a total of 12 samples, it can be concluded that lead and cadmium do not present an environmental threat during and immediately after ash transport to the dump. Portions of zinc, nickel and chromium are released during the ash transport, and arsenic and manganese are released continuously. Copper and iron do not present an environmental threat due to element leaching during and immediately after the coal ash suspension and transport. On the contrary, these elements, as well as chromium, become concentrated during coal ash transport. Adsorbed portions of calcium, magnesium and potassium are also leached during coal ash transport.

  20. Costs of Quality: Exploratory Analysis of Hidden Elements and Prioritization using Analytic Hierarchy Process

    Directory of Open Access Journals (Sweden)

    Sailaja A

    2015-02-01

    Full Text Available Cost of Quality analysis is emerged as an effective tool for the industrial managers for pinpointing the deficiencies in the system as well as for identifying the improvement areas by highlighting the cost reduction opportunities. However , this analysis will be fully effective only if it is further extended to identify the cost incurred in ensuring quality in all areas of the supply chain including the hidden costs and costs of missed out opportunities. Most of the hidden elements of quality costs are difficult to track and not accounted by the traditional accounting tools. An exploratory analysis is made in this research to identify the hidden elements of quality costs in manufacturing industry. Further, the identified cost elements are classified into various groups for better analysis and, finally, prioritized to identify the vital few among them. Analytic Hierarchy Process (AHP technique which is one of the most popular Multi Criteria Decision Method (MCDM and Pareto analysis were used in this study for prioritizing the hidden quality cost elements based on their degree of impact on overall cost of quality. By this analysis, the key cost elements which are to be addressed to reduce the overall cost of quality are identified.

  1. Transformation processes influencing physico-chemical forms of radionuclides and trace elements in natural water systems

    International Nuclear Information System (INIS)

    Salbu, B.; Riise, G.; Oughton, D.H.

    1995-01-01

    In order to assess short and long term consequences of radionuclides and trace elements introduced to aquatic systems, knowledge on source terms, key factors and key processes influencing the speciation is essential. The mobility, bioavailability and subsequent transfer into food chains depend on the physico-chemical forms on radionuclides and trace metals. In addition, transformation processes and especially the interaction with natural organic matter (NOM) influences the distribution pattern. Furthermore, the prevailing climate conditions, e.g. episodic events and temperature are vital for fluxes and for the kinetics of the transformation processes. In the present work processes in catchments and processes associated with acidification, episodic events, climate conditions (temperature) and mixing zone phenomena influencing the speciation of radionuclides and trace metals are highlighted. These processes should be highly relevant for assessing far field consequences of radionuclides potentially released from disposal sites. (authors). 21 refs., 8 figs., 1 tab

  2. Complete Element Abundances of Nine Stars in the r-process Galaxy Reticulum II

    Science.gov (United States)

    Ji, Alexander P.; Frebel, Anna; Simon, Joshua D.; Chiti, Anirudh

    2016-10-01

    We present chemical abundances derived from high-resolution Magellan/Magellan Inamori Kyocera Echelle spectra of the nine brightest known red giant members of the ultra-faint dwarf galaxy Reticulum II (Ret II). These stars span the full metallicity range of Ret II (-3.5 contaminated known r-process pattern. The abundances of lighter elements up to the iron peak are otherwise similar to abundances of stars in the halo and in other ultra-faint dwarf galaxies. However, the scatter in abundance ratios is large enough to suggest that inhomogeneous metal mixing is required to explain the chemical evolution of this galaxy. The presence of low amounts of neutron-capture elements in other ultra-faint dwarf galaxies may imply the existence of additional r-process sites besides the source of r-process elements in Ret II. Galaxies like Ret II may be the original birth sites of r-process enhanced stars now found in the halo. This paper includes data gathered with the 6.5 m Magellan Telescopes located at Las Campanas Observatory, Chile.

  3. Finite Element Modeling of Adsorption Processes for Gas Separation and Purification

    International Nuclear Information System (INIS)

    Humble, Paul H.; Williams, Richard M.; Hayes, James C.

    2009-01-01

    Pacific Northwest National Laboratory (PNNL) has expertise in the design and fabrication of automated radioxenon collection systems for nuclear explosion monitoring. In developing new systems there is an ever present need to reduce size, power consumption and complexity. Most of these systems have used adsorption based techniques for gas collection and/or concentration and purification. These processes include pressure swing adsorption, vacuum swing adsorption, temperature swing adsorption, gas chromatography and hybrid processes that combine elements of these techniques. To better understand these processes, and help with the development of improved hardware, a finite element software package (COMSOL Multiphysics) has been used to develop complex models of these adsorption based operations. The partial differential equations used include a mass balance for each gas species and adsorbed species along with a convection conduction energy balance equation. These equations in conjunction with multicomponent temperature dependent isotherm models are capable of simulating separation processes ranging from complex multibed PSA processes, and multicomponent temperature programmed gas chromatography, to simple two component temperature swing adsorption. These numerical simulations have been a valuable tool for assessing the capability of proposed processes and optimizing hardware and process parameters.

  4. Using rare earth element tracers and neutron activation analysis to study rill erosion process

    International Nuclear Information System (INIS)

    Li Mian; Li Zhanbin; Ding Wengfeng; Liu Puling; Yao Wenyi

    2006-01-01

    Spatially averaged soil erosion data provide little information on the process of rill erosion. The dynamically varied data on the temporal and spatial distributions in the rill erosion process are needed to better understand the erosion process and reveal its innate characteristics. The objectives of this study were to examine the feasibility and effectiveness of rare earth element (REE) tracers and the neutron activation analysis (NAA) method on the study of the rill erosion process and to reveal quantitatively the relationships and characteristics of temporal and spatial distributions of sediment yield in rill erosion. Four REEs were used to study the changeable process of rill erosion at 4 slope positions. Four water inflow rates were applied to a 0.3x5 m soil bed at 3 slopes of 10.5%, 15.8% and 21.2% in scouring experiments. All of the runoff was collected in the experiment. Each sample was air-dried and well mixed. Then 20 g of each sample was sieved through 100-mesh and about a 50 mg sample was weighed for analysis of the four elemental compositions by NAA. Results indicate that the REE tracers and NAA method can be used to not only quantitatively determine soil erosion amounts on different slope segments, but also to reveal the changeable process of rill erosion amount. All of the relative errors of the experimental results were less than 25%, which is considered satisfactory on the study of rill erosion process

  5. Using rare earth element tracers and neutron activation analysis to study rill erosion process

    Energy Technology Data Exchange (ETDEWEB)

    Li Mian [Yellow River Institute of Hydraulic Research, Yellow River Conservancy Commission, Key Laboratory of Yellow River Sediment Research of Ministry of Water Resources, Shunhelu 45, Zhengzhou, Henan 450003 (China)]. E-mail: hnli-mian@163.com; Li Zhanbin [Xi' an University of Technology, Xi' an, Shaanxi 710048 (China); Institute of Soil and Water Conservation, Chinese Academy of Sciences and Ministry of Water Resources, Yangling, Shaanxi 712100 (China); Ding Wengfeng [Institute of Soil and Water Conservation, Yangtse River' s Scientific Research Institute, Wuhan, Hubei 430010 (China); Liu Puling [Institute of Soil and Water Conservation, Chinese Academy of Sciences and Ministry of Water Resources, Yangling, Shaanxi 712100 (China); Yao Wenyi [Yellow River Institute of Hydraulic Research, Yellow River Conservancy Commission, Key Laboratory of Yellow River Sediment Research of Ministry of Water Resources, Shunhelu 45, Zhengzhou, Henan 450003 (China)

    2006-03-15

    Spatially averaged soil erosion data provide little information on the process of rill erosion. The dynamically varied data on the temporal and spatial distributions in the rill erosion process are needed to better understand the erosion process and reveal its innate characteristics. The objectives of this study were to examine the feasibility and effectiveness of rare earth element (REE) tracers and the neutron activation analysis (NAA) method on the study of the rill erosion process and to reveal quantitatively the relationships and characteristics of temporal and spatial distributions of sediment yield in rill erosion. Four REEs were used to study the changeable process of rill erosion at 4 slope positions. Four water inflow rates were applied to a 0.3x5 m soil bed at 3 slopes of 10.5%, 15.8% and 21.2% in scouring experiments. All of the runoff was collected in the experiment. Each sample was air-dried and well mixed. Then 20 g of each sample was sieved through 100-mesh and about a 50 mg sample was weighed for analysis of the four elemental compositions by NAA. Results indicate that the REE tracers and NAA method can be used to not only quantitatively determine soil erosion amounts on different slope segments, but also to reveal the changeable process of rill erosion amount. All of the relative errors of the experimental results were less than 25%, which is considered satisfactory on the study of rill erosion process.

  6. Parent Perspectives on the Individual Education Program Process and Product for the Child with Autism

    Science.gov (United States)

    Brandt, Camille M.

    2011-01-01

    This study examined the perspectives of parents of children with autism receiving special education services in an upper Midwestern state. This study sought to determine parent perspectives of priorities for the child's IEP, parent perspectives of content of the child's IEP, and parent perspectives of their experiences at the school, comfort level…

  7. Asymmetric Rolling Process Simulations by Dynamic Explicit Crystallographic Homogenized Finite Element Method

    International Nuclear Information System (INIS)

    Ngoc Tam, Nguyen; Nakamura, Yasunori; Terao, Toshihiro; Kuramae, Hiroyuki; Nakamachi, Eiji; Sakamoto, Hidetoshi; Morimoto, Hideo

    2007-01-01

    Recently, the asymmetric rolling (ASR) has been applied to the material processing of aluminum alloy sheet to control micro-crystal structure and texture in order to improve the mechanical properties. Previously, several studies aimed at high formability sheet generation have been carried out experimentally, but finite element simulations to predict the deformation induced texture evolution of the asymmetrically rolled sheet metals have not been investigated rigorously. In this study, crystallographic homogenized finite element (FE) codes are developed and applied to analyze the asymmetrical rolling processes. The textures of sheet metals were measured by electron back scattering diffraction (EBSD), and compared with FE simulations. The results from the dynamic explicit type Crystallographic homogenization FEM code shows that this type of simulation is a comprehensive tool to predict the plastic induced texture evolution

  8. Abaqus2Matlab: A suitable tool for finite element post-processing

    DEFF Research Database (Denmark)

    Papazafeiropoulos, George; Muñiz-Calvente, Miguel; Martínez Pañeda, Emilio

    2017-01-01

    A suitable piece of software is presented to connect Abaqus, a sophisticated finite element package, with Matlab, the most comprehensive program for mathematical analysis. This interface between these well- known codes not only benefits from the image processing and the integrated graph-plotting ......A suitable piece of software is presented to connect Abaqus, a sophisticated finite element package, with Matlab, the most comprehensive program for mathematical analysis. This interface between these well- known codes not only benefits from the image processing and the integrated graph...... crack propagation in structural materials by means of a cohesive zone approach. The source code, detailed documentation and a large number of tutorials can be freely downloaded from www.abaqus2matlab.com ....

  9. ABAQUS2MATLAB: A Novel Tool for Finite Element Post-Processing

    DEFF Research Database (Denmark)

    Martínez Pañeda, Emilio; Papazafeiropoulos, George; Muniz-Calvente, Miguel

    2017-01-01

    A novel piece of software is presented to connect Abaqus, a sophisticated finite element package, with Matlab, the most comprehensive program for mathematical analysis. This interface between these well-known codes not only benefits from the image processing and the integrated graph-plotting feat......A novel piece of software is presented to connect Abaqus, a sophisticated finite element package, with Matlab, the most comprehensive program for mathematical analysis. This interface between these well-known codes not only benefits from the image processing and the integrated graph...... to demonstrate its capabilities. The source code, detailed documentation and a large number of tutorials can be freely downloaded from www.abaqus2matlab.com....

  10. Study of 3-D stress development in parent and twin pairs of a hexagonal close-packed polycrystal: Part II – crystal plasticity finite element modeling

    International Nuclear Information System (INIS)

    Abdolvand, Hamidreza; Majkut, Marta; Oddershede, Jette; Wright, Jonathan P.; Daymond, Mark R.

    2015-01-01

    Stress heterogeneity within each individual grain of polycrystalline Zircaloy-2 is studied using a crystal plasticity finite element (CPFE) model. For this purpose, the weighted Voronoi tessellation method is used to construct 3D geometries of more than 2600 grains based on their center-of-mass positions and volumes as measured by three-dimensional X-ray diffraction (3DXRD) microscopy. The constructed microstructure is meshed with different element densities and for different numbers of grains. Then a selected group of twin and parent pairs are studied. It is shown that the measured average stress for each grain from the 3DXRD experiment is within the stress variation zone of the grain modeled in the CPFE simulation. Also, the CPFE average stress calculation for each grain is in good agreement with the measured average stress values. It is shown that upon considering the stress variations within each grain, stresses in the parent and twin are quite different if they are plotted in the global coordinate system. However, if the stress tensor is rotated into the local coordinate system of the twin habit plane, all the stress components averaged over the presented population are close, except for the shear acting on the twin plane and the transverse stress. This result is significant as it provides information needed to model such parent-twin interactions in crystal plasticity codes

  11. Effects of industrial processing on essential elements and regulated and emerging contaminant levels in seafood

    DEFF Research Database (Denmark)

    Rasmussen, Rie Romme; Bøge Søndergaard, Annette; Bøknæs, Niels

    2017-01-01

    Mitigation of contaminants in industrial processing was studied for prawns (cooked and peeled), Greenland halibut (cold smoked) and Atlantic salmon (cold smoked and trimmed). Raw prawns had significantly higher cadmium, chromium, iron, selenium and zinc content in autumn than in spring, while...... summer levels typically were intermediate. Peeling raw prawns increased mercury concentration but reduced the concentration of all other elements including inorganic arsenic, total arsenic, chromium, zinc, selenium but especially cadmium, copper and iron (p

  12. Biorefine: Recovery of nutrients and metallic trace elements from different wastes by chemical and biochemical processes

    OpenAIRE

    Tarayre, Cédric; Fischer, Christophe; De Clercq, Lies; Michels, Evi; Meers, Erik; Buysse, Jeroen; Delvigne, Frank; Thonart, Philippe

    2014-01-01

    At present, most waste processing operations are not oriented towards the valorization of valuable reusable components such as nitrogen, phosphorus, potassium and even Metallic Trace Elements (MTEs). Currently, sewage sludge, for example is usually used as a fertilizer in agriculture, in energy production or in the field of construction. Ashes originating from sludge incineration contain heavy metals and minerals in large quantities. Manure is mainly used in agriculture, although considerable...

  13. Mobility of rare earth element in hydrothermal process and weathering product: a review

    Science.gov (United States)

    Lintjewas, L.; Setiawan, I.

    2018-02-01

    The Rare Earth Element (REE), consists of La, Ce, Pr, Nd, Pm, Sm, Eu, Gd, Tb, Dy, Lu, Ho, Er, Tm, Yb, are important elements to be used as raw materials of advanced technology such as semiconductors, magnets, and lasers. The research of REE in Indonesia has not been done. Several researches were conducted on granitic rocks and weathering product such as Bangka, Sibolga, West Kalimantan, West Sulawesi and Papua. REE can be formed by hydrothermal processes such as Bayan Obo, South China. The REE study on active hydrothermal system (geothermal) in this case also has the potential to produce mineral deposits. The purpose of this review paper is to know the mobility of REE on hydrothermal process and weathering products. Mobility of REE in the hydrothermal process can change the distribution patterns and REE content such as Ce, Eu, La, Lu, Nd, Sm, and Y. Another process besides the hydrothermal is weathering process. REE mobility is influenced by weathering products, where the REE will experience residual and secondary enrichment processes in heavier minerals.

  14. Gear hot forging process robust design based on finite element method

    International Nuclear Information System (INIS)

    Xuewen, Chen; Won, Jung Dong

    2008-01-01

    During the hot forging process, the shaping property and forging quality will fluctuate because of die wear, manufacturing tolerance, dimensional variation caused by temperature and the different friction conditions, etc. In order to control this variation in performance and to optimize the process parameters, a robust design method is proposed in this paper, based on the finite element method for the hot forging process. During the robust design process, the Taguchi method is the basic robust theory. The finite element analysis is incorporated in order to simulate the hot forging process. In addition, in order to calculate the objective function value, an orthogonal design method is selected to arrange experiments and collect sample points. The ANOVA method is employed to analyze the relationships of the design parameters and design objectives and to find the best parameters. Finally, a case study for the gear hot forging process is conducted. With the objective to reduce the forging force and its variation, the robust design mathematical model is established. The optimal design parameters obtained from this study indicate that the forging force has been reduced and its variation has been controlled

  15. DETECTION OF THE SECOND r-PROCESS PEAK ELEMENT TELLURIUM IN METAL-POOR STARS ,

    International Nuclear Information System (INIS)

    Roederer, Ian U.; Lawler, James E.; Cowan, John J.; Beers, Timothy C.; Frebel, Anna; Ivans, Inese I.; Schatz, Hendrik; Sobeck, Jennifer S.; Sneden, Christopher

    2012-01-01

    Using near-ultraviolet spectra obtained with the Space Telescope Imaging Spectrograph on board the Hubble Space Telescope, we detect neutral tellurium in three metal-poor stars enriched by products of r-process nucleosynthesis, BD +17 3248, HD 108317, and HD 128279. Tellurium (Te, Z = 52) is found at the second r-process peak (A ≈ 130) associated with the N = 82 neutron shell closure, and it has not been detected previously in Galactic halo stars. The derived tellurium abundances match the scaled solar system r-process distribution within the uncertainties, confirming the predicted second peak r-process residuals. These results suggest that tellurium is predominantly produced in the main component of the r-process, along with the rare earth elements.

  16. Bidirectional Relationships Between Parenting Processes and Deviance in a Sample of Inner-City African American Youth

    Science.gov (United States)

    Harris, Charlene; Vazsonyi, Alexander T.; Bolland, John M.

    2016-01-01

    The current study assessed for bidirectional relationships among supportive parenting (knowledge), negative parenting (permissiveness), and deviance in a sample (N = 5,325) of poor, inner-city African American youth from the Mobile Youth Survey (MYS) over 4 years. Cross-lagged path analysis provided evidence of significant bidirectional paths among parenting processes (knowledge and permissiveness) and deviance over time. Follow-up multigroup tests provided only modest evidence of dissimilar relationships by sex and by developmental periods. The findings improve our understanding of developmental changes between parenting behaviors and deviance during adolescence and extended current research of the bidirectionality of parent and child relationships among inner-city African American youth. PMID:28316460

  17. Some studies on weld bead geometries for laser spot welding process using finite element analysis

    International Nuclear Information System (INIS)

    Siva Shanmugam, N.; Buvanashekaran, G.; Sankaranarayanasamy, K.

    2012-01-01

    Highlights: → In this study, a 2 kW Nd:YAG laser welding system is used to conduct laser spot welding trials. → The size and shape of the laser spot weld is predicted using finite element simulation. → The heat input is assumed to be a three-dimensional conical Gaussian heat source. → The result highlights the effect of beam incident angle on laser spot welds. → The achieved results of numerical simulation are almost identical with a real weldment. -- Abstract: Nd:YAG laser beam welding is a high power density welding process which has the capability to focus the beam to a very small spot diameter of about 0.4 mm. It has favorable characteristics namely, low heat input, narrow heat affected zone and lower distortions, as compared to conventional welding processes. In this study, finite element method (FEM) is applied for predicting the weld bead geometry i.e. bead length (BL), bead width (BW) and depth of penetration (DP) in laser spot welding of AISI 304 stainless steel sheet of thickness 2.5 mm. The input parameters of laser spot welding such as beam power, incident angle of the beam and beam exposure time are varied for conducting experimental trials and numerical simulations. Temperature-dependent thermal properties of AISI 304 stainless steel, the effect of latent heat of fusion, and the convective and radiative aspects of boundary conditions are considered while developing the finite element model. The heat input to the developed model is assumed to be a three-dimensional conical Gaussian heat source. Finite-element simulations of laser spot welding were carried out by using Ansys Parametric Design Language (APDL) available in finite-element code, ANSYS. The results of the numerical analysis provide the shape of the weld beads for different ranges of laser input parameters that are subsequently compared with the results obtained through experimentation and it is found that they are in good agreement.

  18. The Origin of r-process Elements in the Milky Way

    Science.gov (United States)

    Côté, Benoit; Fryer, Chris L.; Belczynski, Krzysztof; Korobkin, Oleg; Chruślińska, Martyna; Vassh, Nicole; Mumpower, Matthew R.; Lippuner, Jonas; Sprouse, Trevor M.; Surman, Rebecca; Wollaeger, Ryan

    2018-03-01

    Some of the heavy elements, such as gold and europium (Eu), are almost exclusively formed by the rapid neutron capture process (r-process). However, it is still unclear which astrophysical site between core-collapse supernovae and neutron star–neutron star (NS–NS) mergers produced most of the r-process elements in the universe. Galactic chemical evolution (GCE) models can test these scenarios by quantifying the frequency and yields required to reproduce the amount of europium (Eu) observed in galaxies. Although NS–NS mergers have become popular candidates, their required frequency (or rate) needs to be consistent with that obtained from gravitational wave measurements. Here, we address the first NS–NS merger detected by LIGO/Virgo (GW170817) and its associated gamma-ray burst and analyze their implication for the origin of r-process elements. The range of NS–NS merger rate densities of 320–4740 Gpc‑3 yr‑1 provided by LIGO/Virgo is remarkably consistent with the range required by GCE to explain the Eu abundances in the Milky Way with NS–NS mergers, assuming the solar r-process abundance pattern for the ejecta. Under the same assumption, this event has produced about 1–5 Earth masses of Eu, and 3–13 Earth masses of gold. When using theoretical calculations to derive Eu yields, constraining the role of NS–NS mergers becomes more challenging because of nuclear astrophysics uncertainties. This is the first study that directly combines nuclear physics uncertainties with GCE calculations. If GW170817 is a representative event, NS–NS mergers can produce Eu in sufficient amounts and are likely to be the main r-process site.

  19. Increasing the efficiency of designing hemming processes by using an element-based metamodel approach

    Science.gov (United States)

    Kaiser, C.; Roll, K.; Volk, W.

    2017-09-01

    In the automotive industry, the manufacturing of automotive outer panels requires hemming processes in which two sheet metal parts are joined together by bending the flange of the outer part over the inner part. Because of decreasing development times and the steadily growing number of vehicle derivatives, an efficient digital product and process validation is necessary. Commonly used simulations, which are based on the finite element method, demand significant modelling effort, which results in disadvantages especially in the early product development phase. To increase the efficiency of designing hemming processes this paper presents a hemming-specific metamodel approach. The approach includes a part analysis in which the outline of the automotive outer panels is initially split into individual segments. By doing a para-metrization of each of the segments and assigning basic geometric shapes, the outline of the part is approximated. Based on this, the hemming parameters such as flange length, roll-in, wrinkling and plastic strains are calculated for each of the geometric basic shapes by performing a meta-model-based segmental product validation. The metamodel is based on an element similar formulation that includes a reference dataset of various geometric basic shapes. A random automotive outer panel can now be analysed and optimized based on the hemming-specific database. By implementing this approach into a planning system, an efficient optimization of designing hemming processes will be enabled. Furthermore, valuable time and cost benefits can be realized in a vehicle’s development process.

  20. The Release of Trace Elements in the Process of Coal Coking

    Directory of Open Access Journals (Sweden)

    Jan Konieczyński

    2012-01-01

    Full Text Available In order to assess the penetration of individual trace elements into the air through their release in the coal coking process, it is necessary to determine the loss of these elements by comparing their contents in the charge coal and in coke obtained. The present research covered four coke oven batteries differing in age, technology, and technical equipment. By using mercury analyzer MA-2 and the method of ICP MS As, Be, Cd, Co, Hg, Mn, Ni, Se, Sr, Tl, V, and Zn were determined in samples of charge coal and yielded coke. Basing on the analyses results, the release coefficients of selected elements were determined. Their values ranged from 0.5 to 94%. High volatility of cadmium, mercury, and thallium was confirmed. The tests have shown that although the results refer to the selected case studies, it may be concluded that the air purity is affected by controlled emission occurring when coke oven batteries are fired by crude coke oven gas. Fugitive emission of the trace elements investigated, occurring due to coke oven leaks and openings, is small and, is not a real threat to the environment except mercury.

  1. Cell-element simulations to optimize the performance of osmotic processes in porous membranes

    KAUST Repository

    Calo, Victor M.

    2018-05-11

    We present a new module of the software tool PoreChem for 3D simulations of osmotic processes at the cell-element scale. We consider the most general fully coupled model (see e.g., Sagiv and Semiat (2011)) in 3D to evaluate the impact on the membrane performance of both internal and external concentration polarization, which occurs in a cell-element for different operational conditions. The model consists of the Navier–Stokes–Brinkman system to describe the free fluid flow and the flow within the membrane with selective and support layers, a convection–diffusion equation to describe the solute transport, and nonlinear interface conditions to fully couple these equations. First, we briefly describe the mathematical model and discuss the discretization of the continuous model, the iterative solution, and the software implementation. Then, we present the analytical and numerical validation of the simulation tool. Next, we perform and discuss numerical simulations for a case study. The case study concerns the design of a cell element for the forward osmosis experiments. Using the developed software tool we qualitatively and quantitatively investigate the performance of a cell element that we designed for laboratory experiments of forward osmosis, and discuss the differences between the numerical solutions obtained with the full 3D and reduced 2D models. Finally, we demonstrate how the software enables investigating membrane heterogeneities.

  2. The Word Game: an innovative strategy for assessing implicit processes in parents at risk for child physical abuse.

    Science.gov (United States)

    Crouch, Julie L; Irwin, Lauren M; Wells, Brett M; Shelton, Christopher R; Skowronski, John J; Milner, Joel S

    2012-06-01

    Contemporary theories of child physical abuse (CPA) emphasize the proximal role of social cognitive processes (many of which are implicit in nature) in the occurrence of parental aggression. However, methods that allow for the systematic examination of implicit cognitive processes during the course of aggressive interactions are needed. To address this need, the present study was designed to examine the utility of the Word Game, an innovative procedure designed to assess implicit changes in schema accessibility during the course of an interpersonal exchange involving aggressive response options. The game involves a series of competitive reaction time trials which are actually lexical decision making trials designed to determine the accessibility of schema throughout the game. Each parent was led to believe that they were competing against another player with whom they exchanged sound blasts of varying intensities. Participants in the present study were parents who were either low (n=50) or high (n=20) risk for CPA. Results revealed that high CPA risk parents behaved more aggressively than low CPA risk parents and that provocation augmented the aggressiveness of all participants. Among high CPA risk parents, positive schema became less accessible (whereas negative schema became more accessible) following lost rounds. At the conclusion of the game, high CPA risk parents reported more aggressive motives than low CPA risk parents. Further, aggressive motives significantly mediated the association between CPA risk status and aggressiveness (i.e., mean sound blast selections). Collectively, results support the potential utility of the Word Game as a means of advancing the study of social cognitive processes involved in parental aggression. Published by Elsevier Ltd.

  3. Feasibility Study for Monitoring Actinide Elements in Process Materials Using FO-LIBS at Advanced spent fuel Conditioning Process Facility

    Energy Technology Data Exchange (ETDEWEB)

    Han, Bo-Young; Choi, Daewoong; Park, Se Hwan; Kim, Ho-Dong [Nonproliferation System Research Division, Korea Atomic Energy Research Institute, Daejeon, 305-353 (Korea, Republic of); Dae, Dongsun [Department of Chemistry, Mokpo National University, Jeonnam 534-729 (Korea, Republic of); Whitehouse, Andrew I. [Applied Photonics Ltd., Unit 8 Carleton Business Park, Skipton, North Yorkshire BD23 2DE (United Kingdom)

    2015-07-01

    Korea Atomic Energy Research Institute (KAERI) have been developing the design and deployment methodology of Laser- Induced Breakdown Spectroscopy (LIBS) instrument for safeguards application within the argon hot cell environment at Advanced spent fuel Conditioning Process Facility (ACPF), where ACPF is a facility being refurbished for the laboratory-scaled demonstration of advanced spent fuel conditioning process. LIBS is an analysis technology used to measure the emission spectra of excited elements in the local plasma of a target material induced by a laser. The spectra measured by LIBS are analyzed to verify the quality and quantity of the specific element in the target matrix. Recently LIBS has been recognized as a promising technology for safeguards purposes in terms of several advantages including a simple sample preparation and in-situ analysis capability. In particular, a feasibility study of LIBS to remotely monitor the nuclear material in a high radiation environment has been carried out for supporting the IAEA safeguards implementation. Fiber-Optic LIBS (FO-LIBS) deployment was proposed by Applied Photonics Ltd because the use of fiber optics had benefited applications of LIBS by delivering the laser energy to the target and by collecting the plasma light. The design of FO-LIBS instrument for the measurement of actinides in the spent fuel and high temperature molten salt at ACPF had been developed in cooperation with Applied Photonics Ltd. FO-LIBS has some advantages as followings: the detectable plasma light wavelength range is not limited by the optical properties of the thick lead-glass shield window and the potential risk of laser damage to the lead-glass shield window is not considered. The remote LIBS instrument had been installed at ACPF and then the feasibility study for monitoring actinide elements such as uranium, plutonium, and curium in process materials has been carried out. (authors)

  4. Feasibility Study for Monitoring Actinide Elements in Process Materials Using FO-LIBS at Advanced spent fuel Conditioning Process Facility

    International Nuclear Information System (INIS)

    Han, Bo-Young; Choi, Daewoong; Park, Se Hwan; Kim, Ho-Dong; Dae, Dongsun; Whitehouse, Andrew I.

    2015-01-01

    Korea Atomic Energy Research Institute (KAERI) have been developing the design and deployment methodology of Laser- Induced Breakdown Spectroscopy (LIBS) instrument for safeguards application within the argon hot cell environment at Advanced spent fuel Conditioning Process Facility (ACPF), where ACPF is a facility being refurbished for the laboratory-scaled demonstration of advanced spent fuel conditioning process. LIBS is an analysis technology used to measure the emission spectra of excited elements in the local plasma of a target material induced by a laser. The spectra measured by LIBS are analyzed to verify the quality and quantity of the specific element in the target matrix. Recently LIBS has been recognized as a promising technology for safeguards purposes in terms of several advantages including a simple sample preparation and in-situ analysis capability. In particular, a feasibility study of LIBS to remotely monitor the nuclear material in a high radiation environment has been carried out for supporting the IAEA safeguards implementation. Fiber-Optic LIBS (FO-LIBS) deployment was proposed by Applied Photonics Ltd because the use of fiber optics had benefited applications of LIBS by delivering the laser energy to the target and by collecting the plasma light. The design of FO-LIBS instrument for the measurement of actinides in the spent fuel and high temperature molten salt at ACPF had been developed in cooperation with Applied Photonics Ltd. FO-LIBS has some advantages as followings: the detectable plasma light wavelength range is not limited by the optical properties of the thick lead-glass shield window and the potential risk of laser damage to the lead-glass shield window is not considered. The remote LIBS instrument had been installed at ACPF and then the feasibility study for monitoring actinide elements such as uranium, plutonium, and curium in process materials has been carried out. (authors)

  5. Fission in R-processes Elements (FIRE) - Annual Report: Fiscal Year 2017

    Energy Technology Data Exchange (ETDEWEB)

    Schunck, Nicolas [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2017-10-18

    The goal of the FIRE topical collaboration in nuclear theory is to determine the astrophysical conditions of the rapid neutron capture process (r-process), which is responsible for the formation of heavy elements. This will be achieved by including in r-process simulations the most advanced models of fission (spontaneous, neutron-induced, beta-delayed) that have been developed at LLNL and LANL. The collaboration is composed of LLNL (lead) and LANL for work on nuclear data (ground-state properties, fission, beta-decay), BNL for nuclear data management, and the university of Notre Dame and North Carolina State University for r-process simulations. Under DOE/NNSA agreement, both universities receive funds from the DOE Office of Science, while national laboratories receive funds directly from NA221.

  6. Structural assessment of aerospace components using image processing algorithms and Finite Element models

    DEFF Research Database (Denmark)

    Stamatelos, Dimtrios; Kappatos, Vassilios

    2017-01-01

    Purpose – This paper presents the development of an advanced structural assessment approach for aerospace components (metallic and composites). This work focuses on developing an automatic image processing methodology based on Non Destructive Testing (NDT) data and numerical models, for predicting...... the residual strength of these components. Design/methodology/approach – An image processing algorithm, based on the threshold method, has been developed to process and quantify the geometric characteristics of damages. Then, a parametric Finite Element (FE) model of the damaged component is developed based...... on the inputs acquired from the image processing algorithm. The analysis of the metallic structures is employing the Extended FE Method (XFEM), while for the composite structures the Cohesive Zone Model (CZM) technique with Progressive Damage Modelling (PDM) is used. Findings – The numerical analyses...

  7. Culture and Family Process: Measures of Familism for Filipino and Korean American Parents.

    Science.gov (United States)

    Choi, Yoonsun; Kim, Tae Yeun; Noh, Samuel; Lee, Jeanette; Takeuchi, David

    2017-10-15

    This study tests the psychometric properties of multiple survey items and scales that are either underused or newly developed to assess familism among Asian Americans. Using data collected from 150 Filipino and 188 Korean American parents (mostly mothers) in the Midwest region in 2013, the measures were examined for validity and reliability for each group and, when appropriate, for cross-cultural equivalence across the groups. Several scales and their items showed high quality psychometric properties and are ready for use to more accurately assess family process of each target group and to conduct comparative analyses. The findings also show that, contrary to the expectation, Filipino American families express more traditional aspects of familism than do Korean American families, and are more likely to reinforce traditional familism beliefs and behaviors among their children. This study reinforces a need for more empirical- and subgroup-specific research effort. © 2017 Family Process Institute.

  8. Elemental balance of SRF production process: solid recovered fuel produced from municipal solid waste.

    Science.gov (United States)

    Nasrullah, Muhammad; Vainikka, Pasi; Hannula, Janne; Hurme, Markku; Oinas, Pekka

    2016-01-01

    In the production of solid recovered fuel (SRF), certain waste components have excessive influence on the quality of product. The proportion of rubber, plastic (hard) and certain textiles was found to be critical as to the elemental quality of SRF. The mass flow of rubber, plastic (hard) and textiles (to certain extent, especially synthetic textile) components from input waste stream into the output streams of SRF production was found to play the decisive role in defining the elemental quality of SRF. This paper presents the mass flow of polluting and potentially toxic elements (PTEs) in SRF production. The SRF was produced from municipal solid waste (MSW) through mechanical treatment (MT). The results showed that of the total input chlorine content to process, 55% was found in the SRF and 30% in reject material. Of the total input arsenic content, 30% was found in the SRF and 45% in fine fraction. In case of cadmium, lead and mercury, of their total input content to the process, 62%, 38% and 30%, respectively, was found in the SRF. Among the components of MSW, rubber material was identified as potential source of chlorine, containing 8.0 wt.% of chlorine. Plastic (hard) and textile components contained 1.6 and 1.1. wt.% of chlorine, respectively. Plastic (hard) contained higher lead and cadmium content compared with other waste components, i.e. 500 mg kg(-1) and 9.0 mg kg(-1), respectively. © The Author(s) 2015.

  9. Assessing the elements mobility through the regolith and their potential as tracers for hydrological processes

    Science.gov (United States)

    Moragues-Quiroga, Cristina; Hissler, Christophe; Chabaux, François; Legout, Arnaud; Stille, Peter

    2017-04-01

    Regoliths encompass different materials from the fresh bedrock to the top of the organic horizons. The regolith is a major component of the critical zone where fluxes of water, energy, solutes and matter occur. Therefore, its bio-physico-chemical properties drastically impact the water that percolates and/or stores in its different parts (organic and mineral soil horizons, and weathered and fractured bedrock). In order to better understand the critical zone functioning, we propose to assess the interaction between chemical elements from the regolith matrix and water during drainage infiltration. For this, we focus firstly on the potential mobility of different groups of major and trace elements according to a leaching experiment made on 10 different layers of a 7.5 m depth slate regolith, which covers a large part of the Rhenish Massif. Secondly, we carried out Sr-Nd-Pb-U-Th isotope analyses for 5 of these samples in both the untreated and leached samples. Given the specific chemical and mineralogical composition of each sampled material, our approach enables to trace the origin of major and trace elements and eventually assess their mobility. The results deliver valuable information on exchange processes at the water-mineral interface in the different zones of the regolith, which could improve the selection of tracers for the study of hydrological processes.

  10. Supervised Classification Processes for the Characterization of Heritage Elements, Case Study: Cuenca-Ecuador

    Science.gov (United States)

    Briones, J. C.; Heras, V.; Abril, C.; Sinchi, E.

    2017-08-01

    The proper control of built heritage entails many challenges related to the complexity of heritage elements and the extent of the area to be managed, for which the available resources must be efficiently used. In this scenario, the preventive conservation approach, based on the concept that prevent is better than cure, emerges as a strategy to avoid the progressive and imminent loss of monuments and heritage sites. Regular monitoring appears as a key tool to identify timely changes in heritage assets. This research demonstrates that the supervised learning model (Support Vector Machines - SVM) is an ideal tool that supports the monitoring process detecting visible elements in aerial images such as roofs structures, vegetation and pavements. The linear, gaussian and polynomial kernel functions were tested; the lineal function provided better results over the other functions. It is important to mention that due to the high level of segmentation generated by the classification procedure, it was necessary to apply a generalization process through opening a mathematical morphological operation, which simplified the over classification for the monitored elements.

  11. Amphibole trace elements as indicators of magmatic processes at Mount St. Helens

    Science.gov (United States)

    Hampel, T. R.; Rowe, M. C.; Kent, A.; Thornber, C. R.

    2011-12-01

    Amphibole has the capability of incorporating a wide variety of trace elements resulting from a range of magmatic processes. Prior studies have used trace elements such as Li and Cu in amphibole to investigate volatile mobility associated with magma ascent regarding the 2004-2008 eruption of Mount St. Helens (Rowe et al. 2008). In order to investigate magmatic processes associated with the 2004-2008 eruption of Mount St. Helens we have measured a range of fluid-mobile trace elements in conjunction with major element compositions of amphibole phenocrysts in dacite lava. Major elements and volatiles (Cl, F) were measured by electron microprobe analysis at Washington State University and trace elements (Li, Sc, Co, Cu, Zn, Sr, Y, Zr, Mo, Ag, Sn, Sb, Te, Ba, Ce, W, and Pb) were analyzed by laser ablation (LA)-ICP-MS at Oregon State University. Amphibole crystallization temperatures were calculated after Ridolfi et al. (2010). Core to rim transects were measured by electron microprobe to evaluate volatile concentrations and temperature profiles across individual phenocrysts. Core temperatures from 17 days and 226 days post eruption are consistently hotter than the rim temperatures 997 to 881 degrees C, respectively. Amphiboles from the end of the eruption (811 days post eruption) appear to be more complex, with phenocrysts having both increasing and decreasing temperatures toward the rims. The overall calculated temperature range of the amphiboles at the end of the eruption is 1022 to 919 degrees C. There is much diversity in the concentrations of Li and Cu within the phenocrysts in both the samples and throughout the eruption. Concentrations steadily increase in the beginning of the eruption then drop dramatically toward the middle, slowly increase toward the end eruption. Overall concentrations of Sr, Sb, Co, Sn, Mo, Ba, Ce, Sc, and Y do not change over the course of the eruption but do vary sample to sample. Preliminary data for Zn, Sb, Ag, and W suggest the

  12. Modelling of destructive ability of water-ice-jet while machine processing of machine elements

    Directory of Open Access Journals (Sweden)

    Burnashov Mikhail

    2017-01-01

    Full Text Available This paper represents the classification of the most common contaminants, appearing on the surfaces of machine elements after a long-term service.The existing well-known surface cleaning methods are described and analyzed in the framework of this paper. The article is intended to provide the reader with an understanding of the process of cleaning and removing contamination from machine elements surface by means of water-ice-jet with preprepared beforehand particles, as well as the process of water-ice-jet formation. The paper deals with the description of such advantages of this method as low costs, wastelessness, high quality of the surface, undergoing processing, minimization of harmful impact upon environment and eco-friendliness, which makes it differ radically from formerly known methods. The scheme of interection between the surface and ice particle is represented. A thermo-physical model of destruction of contaminants by means of a water-ice-jet cleaning technology was developed on its basis. The thermo-physical model allows us to make setting of processing mode and the parameters of water-ice-jet scientifically substantiated and well-grounded.

  13. Thermal analysis of fused deposition modeling process using infrared thermography imaging and finite element modeling

    Science.gov (United States)

    Zhou, Xunfei; Hsieh, Sheng-Jen

    2017-05-01

    After years of development, Fused Deposition Modeling (FDM) has become the most popular technique in commercial 3D printing due to its cost effectiveness and easy-to-operate fabrication process. Mechanical strength and dimensional accuracy are two of the most important factors for reliability of FDM products. However, the solid-liquid-solid state changes of material in the FDM process make it difficult to monitor and model. In this paper, an experimental model was developed to apply cost-effective infrared thermography imaging method to acquire temperature history of filaments at the interface and their corresponding cooling mechanism. A three-dimensional finite element model was constructed to simulate the same process using element "birth and death" feature and validated with the thermal response from the experimental model. In 6 of 9 experimental conditions, a maximum of 13% difference existed between the experimental and numerical models. This work suggests that numerical modeling of FDM process is reliable and can facilitate better understanding of bead spreading and road-to-road bonding mechanics during fabrication.

  14. Data-processing strategies for nano-tomography with elemental specification

    Science.gov (United States)

    Liu, Yijin; Cats, Korneel H.; Nelson Weker, Johanna; Andrews, Joy C.; Weckhuysen, Bert M.; Pianetta, Piero

    2013-10-01

    Combining the energy tunability provided by synchrotron X-ray sources with transmission X-ray microscopy, the morphology of materials can be resolved in 3D at spatial resolution down to 30 nm with elemental/chemical specification. In order to study the energy dependence of the absorption coefficient over the investigated volume, the tomographic reconstruction and image registration (before and/or after the tomographic reconstruction) are critical. We show in this paper the comparison of two different data processing strategies and conclude that the signal to noise ratio (S/N) in the final result can be improved via performing tomographic reconstruction prior to the evaluation of energy dependence. Our result echoes the dose fractionation theorem, and is particularly helpful when the element of interest has low concentration.

  15. Designing quality of care--contributions from parents: Parents' experiences of care processes in paediatric care and their contribution to improvements of the care process in collaboration with healthcare professionals.

    Science.gov (United States)

    Gustavsson, Susanne; Gremyr, Ida; Kenne Sarenmalm, Elisabeth

    2016-03-01

    The aim of this article was to explore whether current quality dimensions for health care services are sufficient to capture how parents perceive and contribute to quality of health care. New quality improvement initiatives that actively involve patients must be examined with a critical view on established quality dimensions to ensure that these measures support patient involvement. This paper used a qualitative and descriptive design. This paper is based on interviews with parents participating in two experience-based co-design projects in a Swedish hospital that included qualitative content analysis of data from 12 parent interviews in paediatric care. Health care professionals often overemphasize their own significance for value creation in care processes and underappreciate parents' ability to influence and contribute to better quality. However, quality is not based solely on how professionals accomplish their task, but is co-created by health care professionals and parents. Consequently, assessment of quality outcomes also must include parents' ability and context. This paper questions current models of quality dimensions in health care, and suggests additional sub-dimensions, such as family quality and involvement quality. This paper underscores the importance of involving parents in health care improvements with health care professionals to capture as many dimensions of quality as possible. © 2015 John Wiley & Sons Ltd.

  16. THE RELATIONSHIP OF PERSONAL MATURITY OF THE ADOPTIVE PARENTS AND THE PROCESS OF SOCIALIZATIONAND IDENTIFICATION OF PRESCHOOL CHILDREN

    Directory of Open Access Journals (Sweden)

    A N Pronina

    2015-12-01

    Full Text Available The article is devoted to the topic of the development of children from orphanage in a foster home, showing the importance of personal maturity of the adoptive parents. The authors present the results of a study showing that there is a relationship between the individual criteria of personal maturity of the adoptive parents and the process of socialization and individualization of the children from orphanage.

  17. Tension optimization of the conductor-and-support cable elements during stranding process

    Directory of Open Access Journals (Sweden)

    I.M. Chayun

    2016-12-01

    Full Text Available Steel lifting ropes, cables and other similar products are rod statically undeterminable prestressed structures. Preliminary deformations of their elements (wires are caused by their manufacturing technology. Wires suffer stretching, bending with torsion in a stage of elastoplastic deformation. In this work the mechanic-mathematical model of residual forces determination in the wires of polymetallic conductor-and-support cable is offered. Aim: The aim of the work is studying of the mechanical and mathematical model defining residual forces in the wires of conductor-and-support cable and also the optimization of parameters of a twist by the criterion of residual forces lack after production process finishing. Materials and methods: The method developed by the authors earlier to the study the strain-stressed state of twisted wire products off-loading from technological internal forces has been applied to assess the impact of the approximate value of the longitudinal stiffness of the product. In this paper, each wire is considered as an element of the product individually. This is necessary to investigate the impact of uneven wire tensions on defects of conductor-and-support cable (out-of-straight in a free state and stripping-down. Results: On the basis of the conducted deformation studies of conductor-and-support cable during off-loading process from twist tension of its elements the dependencies of residual forces on the level and interrelation of elements tension has been determined. The condition of ensuring of zero residual forces in the wires of conductor-and-support cable after production is formulated. It was found that calculated values of residual forces are almost identical when using of the approximate and exact values of longitudinal stiffness of conductor-and-support cable.

  18. The Process of Parents' Decision-Making to Discharge Their Child against Medical Advice (DAMA: A grounded theory study

    Directory of Open Access Journals (Sweden)

    Nikbakht Nasrabadi Alireza

    2016-05-01

    Full Text Available Discharge against medical advice (DAMA refers to the phenomenon that patient or the patient’s surrogate decides to leave the hospital before the attending physician confirms the patient is discharged. Children are much more vulnerable to such discharges. This process occurs with different mechanisms that identifying them can be helpful in reducing this phenomenon. We aimed to explore the process of parents' decision-making to discharge their child against medical advice. In-depth, semi-structured interviews were conducted with 10 fathers, 10 mothers, 6 nurses and 3 physician assistants and the data were collected to the point of saturation. Grounded theory methodology was adopted for data collection and analysis. The results of qualitative analysis in the field of the parents' decisionmaking on the DAMA revealed 4 main themes: "lack of family-centered care", "disruption of the parenting process", "distrust to the medical team and center" and "psychological strategy of shirk responsibility for child care and treatment ". By providing family-centered care, adopting measures to empowering the families, developing the trust of parents to the health care team and developing a discharge plan from the beginning of children hospitalization with the cooperation of health care team and parents and considering all factors such as child's special health condition and parent's health related perceptions and beliefs, children will not be discharged against medical advice and will experience better outcomes.

  19. Early childhood experiences, parenting and the process of drug dependency among young people in Tehran, Iran.

    Science.gov (United States)

    Mirlashari, Jila; Demirkol, Apo; Salsali, Mahvash; Rafiey, Hassan; Jahanbani, Jahanfar

    2012-06-01

    Substance abuse has become a major public health problem in Iran. The process of developing an addiction is complex and multifaceted. Early childhood experiences are thought to be one of the important determinants of addictive behaviour. The aim of this qualitative study is to explore the early childhood experiences, especially the experiences within the immediate family, of current substance-using young adults in Iran. The study is qualitative in nature. In-depth interviews were conducted with 15 young men and women who were either in treatment for their addiction or were active drug users at the time of the interviews. Moreover, four interviews have been conducted with family members of participants. The majority of the participants experienced traumatic events during childhood and came from dysfunctional families. There appears to be a significant disconnect between these individuals and their families. An obedience-instilling parenting style and parents' knowledge and attitude toward drug using and prevention were also identified as important determinants of substance use. The results of this research point out the need for early interventions for at-risk families as well as at-risk individuals. © 2011 Australasian Professional Society on Alcohol and other Drugs.

  20. Study of 3-D stress development in parent and twin pairs of a hexagonal close-packed polycrystal: Part II - Crystal plasticity finite element modeling

    DEFF Research Database (Denmark)

    Abdolvand, Hamidreza; Majkut, Marta; Oddershede, Jette

    2015-01-01

    for each grain from the 3DXRD experiment is within the stress variation zone of the grain modeled in the CPFE simulation. Also, the CPFE average stress calculation for each grain is in good agreement with the measured average stress values. It is shown that upon considering the stress variations within......Stress heterogeneity within each individual grain of polycrystalline Zircaloy-2 is studied using a crystal plasticity finite element (CPFE) model. For this purpose, the weighted Voronoi tessellation method is used to construct 3D geometries of more than 2600 grains based on their center......-of-mass positions and volumes as measured by three-dimensional X-ray diffraction (3DXRD) microscopy. The constructed microstructure is meshed with different element densities and for different numbers of grains. Then a selected group of twin and parent pairs are studied. It is shown that the measured average stress...

  1. Parallel finite elements with domain decomposition and its pre-processing

    International Nuclear Information System (INIS)

    Yoshida, A.; Yagawa, G.; Hamada, S.

    1993-01-01

    This paper describes a parallel finite element analysis using a domain decomposition method, and the pre-processing for the parallel calculation. Computer simulations are about to replace experiments in various fields, and the scale of model to be simulated tends to be extremely large. On the other hand, computational environment has drastically changed in these years. Especially, parallel processing on massively parallel computers or computer networks is considered to be promising techniques. In order to achieve high efficiency on such parallel computation environment, large granularity of tasks, a well-balanced workload distribution are key issues. It is also important to reduce the cost of pre-processing in such parallel FEM. From the point of view, the authors developed the domain decomposition FEM with the automatic and dynamic task-allocation mechanism and the automatic mesh generation/domain subdivision system for it. (author)

  2. Implementation and Process Issues in Using Group Triple P with Chinese Parents: Preliminary Findings.

    Science.gov (United States)

    Crisante, Lea; Ng, Sally

    2003-01-01

    Implements and evaluates a positive parenting program intervention with Chinese parents. Results reveal significant improvements on the Prosocial Behavior Score. Given the unwillingness of some parents to complete questionnaires, the difficulties encountered in conducting evaluation in cross-cultural contexts are discussed, along with…

  3. Parental Reactions to the Special Education Individual Education Program Process: Looking through the Lens of Grief

    Science.gov (United States)

    Haley, Melinda; Hammond, Helen; Ingalls, Lawrence; Marín, Merranda Romaro

    2013-01-01

    Parental grief reactions have typically been examined in situations where parents have a child diagnosed with a major medical or mental health condition. This study used the grief and loss model as conceptualized by Kubler-Ross (1969), Lamb (1988), and Kubler-Ross and Kessler (2005) as a foundation in examining parental reactions when a child has…

  4. The R-process: supernovae and other sources of the heaviest elements

    International Nuclear Information System (INIS)

    Thielemann, F.-K.; Moceli, D.; Panov, I.

    2007-01-01

    Rapid neutron capture in stellar explosions is responsible for the heaviest elements in nature, up to Th, U and beyond. This nucleosynthesis process, the r-process, is unique in the sense that a combination of nuclear physics far from stability (masses, half-lives, neutron-capture and photodisintegration, neutron-induced and beta-delayed fission and last but not least neutrino-nucleus interactions) is intimately linked to ejecta from astrophysical explosions (core collapse supernovae or other neutron star related events). The astrophysics and nuclear physics involved still harbor many uncertainties, either in the extrapolation of nuclear properties far beyond present experimental explorations or in the modeling of multidimensional, general relativistic (neutrino-radiation) hydrodynamics with rotation and possibly required magnetic fields. Observational clues about the working of the r-process are mostly obtained from solar abundances and from the abundance evolution of the heaviest elements as a function of galactic age, as witnessed in old extremely metal-poor stars. They contain information whether the r-process is identical for all stellar events, how abundance features develop with galactic time and whether the frequency of r-process events is comparable to that of average core collapse supernovae - producing oxygen through titanium, as well as iron-group nuclei. The theoretical modeling of the r-process has advanced from simple approaches, where the use of static neutron densities and temperatures can aid to test the influence of nuclear properties far from stability on abundance features, to more realistic expansions with a given entropy, global neutron/proton ratio and expansion timescales, as expected from explosive astrophysical events. The direct modeling in astrophysical events such as supernovae still faces the problem whether the required conditions can be met. (author)

  5. Simulation of the cabling process for Rutherford cables: An advanced finite element model

    Science.gov (United States)

    Cabanes, J.; Garlasche, M.; Bordini, B.; Dallocchio, A.

    2016-12-01

    In all existing large particle accelerators (Tevatron, HERA, RHIC, LHC) the main superconducting magnets are based on Rutherford cables, which are characterized by having: strands fully transposed with respect to the magnetic field, a significant compaction that assures a large engineering critical current density and a geometry that allows efficient winding of the coils. The Nb3Sn magnets developed in the framework of the HL-LHC project for improving the luminosity of the Large Hadron Collider (LHC) are also based on Rutherford cables. Due to the characteristics of Nb3Sn wires, the cabling process has become a crucial step in the magnet manufacturing. During cabling the wires experience large plastic deformations that strongly modify the geometrical dimensions of the sub-elements constituting the superconducting strand. These deformations are particularly severe on the cable edges and can result in a significant reduction of the cable critical current as well as of the Residual Resistivity Ratio (RRR) of the stabilizing copper. In order to understand the main parameters that rule the cabling process and their impact on the cable performance, CERN has developed a 3D Finite Element (FE) model based on the LS-Dyna® software that simulates the whole cabling process. In the paper the model is presented together with a comparison between experimental and numerical results for a copper cable produced at CERN.

  6. Magnetically assisted chemical separation (MACS) process: Preparation and optimization of particles for removal of transuranic elements

    International Nuclear Information System (INIS)

    Nunez, L.; Kaminski, M.; Bradley, C.; Buchholz, B.A.; Aase, S.B.; Tuazon, H.E.; Vandegrift, G.F.; Landsberger, S.

    1995-05-01

    The Magnetically Assisted Chemical Separation (MACS) process combines the selectivity afforded by solvent extractants with magnetic separation by using specially coated magnetic particles to provide a more efficient chemical separation of transuranic (TRU) elements, other radionuclides, and heavy metals from waste streams. Development of the MACS process uses chemical and physical techniques to elucidate the properties of particle coatings and the extent of radiolytic and chemical damage to the particles, and to optimize the stages of loading, extraction, and particle regeneration. This report describes the development of a separation process for TRU elements from various high-level waste streams. Polymer-coated ferromagnetic particles with an adsorbed layer of octyl(phenyl)-N,N-diisobutylcarbamoylmethylphosphine oxide (CMPO) diluted with tributyl phosphate (TBP) were evaluated for use in the separation and recovery of americium and plutonium from nuclear waste solutions. Due to their chemical nature, these extractants selectively complex americium and plutonium contaminants onto the particles, which can then be recovered from the solution by using a magnet. The partition coefficients were larger than those expected based on liquid[liquid extractions, and the extraction proceeded with rapid kinetics. Extractants were stripped from the particles with alcohols and 400-fold volume reductions were achieved. Particles were more sensitive to acid hydrolysis than to radiolysis. Overall, the optimization of a suitable NMCS particle for TRU separation was achieved under simulant conditions, and a MACS unit is currently being designed for an in-lab demonstration

  7. Visual processing of multiple elements in the dyslexic brain: evidence for a superior parietal dysfunction

    Directory of Open Access Journals (Sweden)

    Muriel Anne Lobier

    2014-07-01

    Full Text Available The visual attention (VA span deficit hypothesis of developmental dyslexia posits that impaired multiple element processing can be responsible for poor reading outcomes. In VA span impaired dyslexic children, poor performance on letter report tasks is associated with reduced parietal activations for multiple letter processing. While this hints towards a non-specific, attention-based dysfunction, it is still unclear whether reduced parietal activity generalizes to other types of stimuli. Furthermore, putative links between reduced parietal activity and reduced ventral occipito-temporal (vOT in dyslexia have yet to be explored. Using fMRI, we measured brain activity in 12 VA span impaired dyslexic adults and 12 adult skilled readers while they carried out a categorization task on single or multiple alphanumeric or non-alphanumeric characters. While healthy readers activated parietal areas more strongly for multiple than single element processing (right-sided for alphanumeric and bilateral for non-alphanumeric, similar stronger multiple element right parietal activations were absent for dyslexic participants. Contrasts between skilled and dyslexic readers revealed significantly reduced right superior parietal lobule (SPL activity for dyslexic readers regardless of stimuli type. Using a priori anatomically defined ROI, we showed that neural activity was reduced for dyslexic participants in both SPL and vOT bilaterally. Finally, we used multiple regressions to test whether SPL activity could predict vOT activity in each group. In the left hemisphere, SPL activity modulated vOT activity for both normal and dyslexic readers. In contrast, in the right hemisphere, SPL activity modulated vOT activity only for dyslexic readers. These results bring critical support to the visual attention interpretation of the VA Span deficit. In addition, they offer a new insight on how deficits in automatic vOT based word recognition could arise in developmental dyslexia.

  8. Finite Element Analysis for Bending Process of U-Bending Specimens

    Energy Technology Data Exchange (ETDEWEB)

    Park, Won Dong; Bahn, Chi Bum [Pusan National University, Busan (Korea, Republic of)

    2015-10-15

    ASTM G30 suggests that the applied strain can be calculated by dividing thickness by a bend radius. It should be noted, however, that the formula is reliable under an assumption that the ratio of thickness to bend radius is less than 0.2. Typically, to increase the applied stress/strain, the ratio of thickness to bend radius becomes larger than 0.2. This suggests that the estimated strain values by ASTM G30 are not reliable to predict the actual residual strain state of the highly deformed U-bend specimen. For this reason, finite element analysis (FEA) for the bending process of Ubend specimens was conducted by using a commercial finite element analysis software ABAQUS. ver.6.14- 2;2014. From the results of FEA, PWSCC initiation time and U-bend specimen size can be determined exactly. Since local stress and strain have a significant effect on the initiation of PWSCC, it was inappropriate to apply results of ASTM G30 to the PWSCC test directly. According to results of finite element analysis (FEA), elastic relaxation can cause inaccuracy in intended final residual stress. To modify this inaccuracy, additional process reducing the spring back is required. However this additional process also may cause uncertainty of stress/strain state. Therefore, the U-bending specimen size which is not creating uncertainty should be optimized and selected. With the bending radius of 8.3 mm, the thickness of 3 mm and the roller distance of 32.6 mm, calculated maximum stress and strain were 670 MPa and 0.21, respectively.

  9. NEW RARE EARTH ELEMENT ABUNDANCE DISTRIBUTIONS FOR THE SUN AND FIVE r-PROCESS-RICH VERY METAL-POOR STARS

    International Nuclear Information System (INIS)

    Sneden, Christopher; Lawler, James E.; Den Hartog, Elizabeth A.; Cowan, John J.; Ivans, Inese I.

    2009-01-01

    We have derived new abundances of the rare earth elements Pr, Dy, Tm, Yb, and Lu for the solar photosphere and for five very metal-poor, neutron-capture r-process-rich giant stars. The photospheric values for all five elements are in good agreement with meteoritic abundances. For the low-metallicity sample, these abundances have been combined with new Ce abundances from a companion paper, and reconsideration of a few other elements in individual stars, to produce internally consistent Ba, rare earth, and Hf (56 ≤ Z ≤ 72) element distributions. These have been used in a critical comparison between stellar and solar r-process abundance mixes.

  10. Coal fly ash basins as an attractive nuisance to birds: parental provisioning exposes nestlings to harmful trace elements.

    Science.gov (United States)

    Bryan, A L; Hopkins, W A; Parikh, J H; Jackson, B P; Unrine, J M

    2012-02-01

    Birds attracted to nest around coal ash settling basins may expose their young to contaminants by provisioning them with contaminated food. Diet and tissues of Common Grackle (Quiscalus quiscala) nestlings were analyzed for trace elements to determine if nestlings were accumulating elements via dietary exposure and if feather growth limits elemental accumulation in other tissues. Arsenic, cadmium, and selenium concentrations in ash basin diets were 5× higher than reference diets. Arsenic, cadmium, and selenium concentrations were elevated in feather, liver, and carcass, but only liver Se concentrations approached levels of concern. Approximately 15% of the total body burden of Se, As, and Cd was sequestered in feathers of older (>5 days) nestlings, whereas only 1% of the total body burden of Sr was sequestered in feathers. Feather concentrations of only three elements (As, Se, and Sr) were correlated with liver concentrations, indicating their value as non-lethal indicators of exposure. Copyright © 2011 Elsevier Ltd. All rights reserved.

  11. The "Word Game": An Innovative Strategy for Assessing Implicit Processes in Parents at Risk for Child Physical Abuse

    Science.gov (United States)

    Crouch, Julie L.; Irwin, Lauren M.; Wells, Brett M.; Shelton, Christopher R.; Skowronski, John J.; Milner, Joel S.

    2012-01-01

    Objective: Contemporary theories of child physical abuse (CPA) emphasize the proximal role of social cognitive processes (many of which are implicit in nature) in the occurrence of parental aggression. However, methods that allow for the systematic examination of implicit cognitive processes during the course of aggressive interactions are needed.…

  12. Seismic qualification using digital signal processing/modal testing and finite element techniques

    International Nuclear Information System (INIS)

    Steedman, J.B.; Edelstein, A.

    1983-01-01

    A systematic procedure in which digital signal processing, modal testing and finite element techniques can be used to seismically qualify Class IE equipment for use in nuclear generating stations is presented. A new method was also developed in which measured transmissibility functions and Fourier transformation techniques were combined to compute instrument response spectra. As an illustrative example of the qualification method, the paper follows the qualification of a safety related Class IE Heating, Ventilating, and Air Conditioning (HVAC) Control Panel subjected to both seismic and hydrodynamic loading conditions

  13. Numerical analysis of partially molten splat during thermal spray process using the finite element method

    Science.gov (United States)

    Zirari, M.; Abdellah El-Hadj, A.; Bacha, N.

    2010-03-01

    A finite element method is used to simulate the deposition of the thermal spray coating process. A set of governing equations is solving by a volume of fluid method. For the solidification phenomenon, we use the specific heat method (SHM). We begin by comparing the present model with experimental and numerical model available in the literature. In this study, completely molten or semi-molten aluminum particle impacts a H13 tool steel substrate is considered. Next we investigate the effect of inclination of impact of a partially molten particle on flat substrate. It was found that the melting state of the particle has great effects on the morphologies of the splat.

  14. Study on the high-precision laser welding technology of nuclear fuel elements processing

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Soo Sung; Yang, M. S.; Kim, W. K.; Lee, D. Y

    2001-01-01

    The proper welding method for appendage of bearing pads and spacers of PHWR nuclear fuel elements is considered important in respect to the soundness of weldments and the improvement of the performance of nuclear fuels during the operation in reactor. The probability of welding defects of the appendage parts is mostly apt to occur and it is connected directly with the safty and life prediction of the nuclear reactor in operation. Recently there has been studied all over the world to develope welding technology by laser in nuclear fuel processing, and the appendage of bearing pads and spacers of PHWR nuclear fuel elements. Therefore, the purpose of this study is to investigate the characteristics of the laser welded specimens and make some samples for the appendage of bearing pads of PHWR nuclear fuel elements. This study will be also provide the basic data for the fabrications of the appendage of bearing pads and spacers. Especially the laser welding is supposed to be used in the practical application such as precise materials manufacturing fields. In this respect this technology is not only a basic advanced technology with wide applications but also likely to be used for the development of directly applicable technologies for industries, with high potential benefits derived in the view point of economy and industry.

  15. Trace and major element pollution originating from coal ash suspension and transport processes

    Energy Technology Data Exchange (ETDEWEB)

    Popovic, A.; Djordjevic, D.; Polic, P. [University of Belgrade, Belgrade (Yugoslavia). Faculty of Science, Dept. of Chemistry

    2001-07-01

    Coal ash obtained from Nikola Tesla A power plant in Obrenovac, near Belgrade, Yugoslavia, is mixed with water of the Sava river and transported to the dump. In order to assess pollution caused by leaching of some minor and major elements during ash transport through the pipeline, two sets of samples (six samples each) were subjected to a modified sequential extraction. The first set consisted of coal ash samples taken immediately after combustion, while the second set was obtained by extraction with river water, imitating the processes that occur in the pipeline. Samples were extracted consecutively with distilled water and a 1 M solution of KCl, pH 7, and the differences in extractability were compared in order to predict potential pollution. It is concluded that lead and cadmium do not present an environmental threat during and immediately after ash transport to the dump. Portions of zinc, nickel and chromium are released during the ash transport, and arsenic and manganese are released continuously. Copper and iron do not present an environmental threat due to element leaching during and immediately after the coal ash suspension and transport. On the contrary, these elements, as well as chromium, become concentrated during coal ash transport. Adsorbed portions of calcium, magnesium and potassium are also leached during coal ash transport.

  16. Study on the high-precision laser welding technology of nuclear fuel elements processing

    International Nuclear Information System (INIS)

    Kim, Soo Sung; Yang, M. S.; Kim, W. K.; Lee, D. Y.

    2001-01-01

    The proper welding method for appendage of bearing pads and spacers of PHWR nuclear fuel elements is considered important in respect to the soundness of weldments and the improvement of the performance of nuclear fuels during the operation in reactor. The probability of welding defects of the appendage parts is mostly apt to occur and it is connected directly with the safty and life prediction of the nuclear reactor in operation. Recently there has been studied all over the world to develope welding technology by laser in nuclear fuel processing, and the appendage of bearing pads and spacers of PHWR nuclear fuel elements. Therefore, the purpose of this study is to investigate the characteristics of the laser welded specimens and make some samples for the appendage of bearing pads of PHWR nuclear fuel elements. This study will be also provide the basic data for the fabrications of the appendage of bearing pads and spacers. Especially the laser welding is supposed to be used in the practical application such as precise materials manufacturing fields. In this respect this technology is not only a basic advanced technology with wide applications but also likely to be used for the development of directly applicable technologies for industries, with high potential benefits derived in the view point of economy and industry

  17. Parenting Seminars for Divorcing Parents.

    Science.gov (United States)

    Frieman, Barry B.

    1995-01-01

    Profiles the parenting seminars and counseling services for divorcing parents offered by the Children of Separation and Divorce Center, a community service agency in Maryland. The seminars are designed to help parents adjust to divorce and understand the needs of their children during and after the divorce process. (MDM)

  18. Effect of Bottoming on Material Property during Sheet Forming Process through Finite Element Method

    Science.gov (United States)

    Akinlabi, Stephen A.; Fatoba, Olawale S.; Mashinini, Peter M.; Akinlabi, Esther T.

    2018-03-01

    Metal forming is one of the conventional manufacturing processes of immense relevance till date even though modern manufacturing processes have evolved over the years. It is a known fact that material tends to return or spring back to its original form during forming or bending. The phenomena have been well managed through its application in various manufacturing processes by compensating for the spring back through overbending and bottoming. Overbending is bending the material beyond the desired shape to allow the material to spring back to the expected shape. Bottoming, on the other hand, is a process of undergoing plastic deformation at the point of bending. This study reports on the finite element analysis of the effect of bottoming on the material property during the sheet forming process with the aim of optimising the process. The result of the analysis revealed that the generated plastic strains are in the order between 1.750e00-1 at the peak of the bending and 3.604e00-2, which was at the early stage of the bending.

  19. Finite element simulation of the T-shaped ECAP processing of round samples

    Science.gov (United States)

    Shaban Ghazani, Mehdi; Fardi-Ilkhchy, Ali; Binesh, Behzad

    2018-05-01

    Grain refinement is the only mechanism that increases the yield strength and toughness of the materials simultaneously. Severe plastic deformation is one of the promising methods to refine the microstructure of materials. Among different severe plastic deformation processes, the T-shaped equal channel angular pressing (T-ECAP) is a relatively new technique. In the present study, finite element analysis was conducted to evaluate the deformation behavior of metals during T-ECAP process. The study was focused mainly on flow characteristics, plastic strain distribution and its homogeneity, damage development, and pressing force which are among the most important factors governing the sound and successful processing of nanostructured materials by severe plastic deformation techniques. The results showed that plastic strain is localized in the bottom side of sample and uniform deformation cannot be possible using T-ECAP processing. Friction coefficient between sample and die channel wall has a little effect on strain distributions in mirror plane and transverse plane of deformed sample. Also, damage analysis showed that superficial cracks may be initiated from bottom side of sample and their propagation will be limited due to the compressive state of stress. It was demonstrated that the V shaped deformation zone are existed in T-ECAP process and the pressing load needed for execution of deformation process is increased with friction.

  20. How parents process child health and nutrition information: A grounded theory model.

    Science.gov (United States)

    Lovell, Jennifer L

    2016-02-01

    The aim of the present study was to investigate low-income parents' experiences receiving, making meaning of, and applying sociocultural messages about childhood health and nutrition. Semi-structured interviews were conducted with parents from 16 low-income Early Head Start families. Verbatim interview transcripts, observations, field notes, documentary evidence, and follow-up participant checks were used during grounded theory analysis of the data. Data yielded a potential theoretical model of parental movement toward action involving (a) the culture and context influencing parents, (b) parents' sources of social and cultural messages, (c) parental values and engagement, (d) parental motivation for action, (e) intervening conditions impacting motivation and application, and (f) parent action taken on the individual and social levels. Parent characteristics greatly impacted the ways in which parents understood and applied health and nutrition information. Among other implications, it is recommended that educators and providers focus on a parent's beliefs, values, and cultural preferences regarding food and health behaviors as well as his/her personal/family definition of "health" when framing recommendations and developing interventions. Copyright © 2015 Elsevier Ltd. All rights reserved.

  1. The effect of melt composition on metal-silicate partitioning of siderophile elements and constraints on core formation in the angrite parent body

    Science.gov (United States)

    Steenstra, E. S.; Sitabi, A. B.; Lin, Y. H.; Rai, N.; Knibbe, J. S.; Berndt, J.; Matveev, S.; van Westrenen, W.

    2017-09-01

    We present 275 new metal-silicate partition coefficients for P, S, V, Cr, Mn, Co, Ni, Ge, Mo, and W obtained at moderate P (1.5 GPa) and high T (1683-1883 K). We investigate the effect of silicate melt composition using four end member silicate melt compositions. We identify possible silicate melt dependencies of the metal-silicate partitioning of lower valence elements Ni, Ge and V, elements that are usually assumed to remain unaffected by changes in silicate melt composition. Results for the other elements are consistent with the dependence of their metal-silicate partition coefficients on the individual major oxide components of the silicate melt composition suggested by recently reported parameterizations and theoretical considerations. Using multiple linear regression, we parameterize compiled metal-silicate partitioning results including our new data and report revised expressions that predict their metal-silicate partitioning behavior as a function of P-T-X-fO2. We apply these results to constrain the conditions that prevailed during core formation in the angrite parent body (APB). Our results suggest the siderophile element depletions in angrite meteorites are consistent with a CV bulk composition and constrain APB core formation to have occurred at mildly reducing conditions of 1.4 ± 0.5 log units below the iron-wüstite buffer (ΔIW), corresponding to a APB core mass of 18 ± 11%. The core mass range is constrained to 21 ± 8 mass% if light elements (S and/or C) are assumed to reside in the APB core. Incorporation of light elements in the APB core does not yield significantly different redox states for APB core-mantle differentiation. The inferred redox state is in excellent agreement with independent fO2 estimates recorded by pyroxene and olivine in angrites.

  2. Phosphorus removal from aqueous solution in parent and aluminum-modified eggshells: thermodynamics and kinetics, adsorption mechanism, and diffusion process.

    Science.gov (United States)

    Guo, Ziyan; Li, Jiuhai; Guo, Zhaobing; Guo, Qingjun; Zhu, Bin

    2017-06-01

    Parent and aluminum-modified eggshells were prepared and characterized with X-ray diffraction, specific surface area measurements, infrared spectroscopy, zeta potential, and scanning electron microscope, respectively. Besides, phosphorus adsorptions in these two eggshells at different temperatures and solution pH were carried out to study adsorption thermodynamics and kinetics as well as the mechanisms of phosphorus adsorption and diffusion. The results indicated that high temperature was favorable for phosphorus adsorption in parent and aluminum-modified eggshells. Alkaline solution prompted phosphorus adsorption in parent eggshell, while the maximum adsorption amount was achievable at pH 4 in aluminum-modified eggshell. Adsorption isotherms of phosphorus in these eggshells could be well described by Langmuir and Freundlich models. Phosphorus adsorption amounts in aluminum-modified eggshell were markedly higher compared to those in parent eggshell. Adsorption heat indicated that phosphorus adsorption in parent eggshell was a typically physical adsorption process, while chemical adsorption mechanism of ion exchange between phosphorus and hydroxyl groups on the surface of eggshells was dominated in aluminum-modified eggshell. The time-resolved uptake curves showed phosphorus adsorption in aluminum-modified eggshell was significantly faster than that in parent eggshell. Moreover, there existed two clear steps in time-resolved uptake curves of phosphorus in parent eggshell. Based on pseudo-second order kinetic model and intraparticle diffusion model, we inferred more than one process affected phosphorus adsorption. The first process was the diffusion of phosphorus through water to external surface and the opening of pore channel in the eggshells, and the second process was mainly related to intraparticle diffusion.

  3. A high-sensitive and quantitative in-line monitoring method for transplutonium elements separation processes

    International Nuclear Information System (INIS)

    Zhu Rongbao; Wang Shiju; Xu Yingpu; Zhang Zengrui

    1986-04-01

    A high-sensitive monitoring device and a quantitative analys technigue for transplutonium elements separation processes are described. X-ray and low energy γ-ray are measured by means of a scintillation monitor with two NaI(Tl) thin crystals. The α spectra of the fluents of ion-exchange column is measured by means of Si(Au) surface barrier in-line monitor. The construction of the monitors, auxiliary electronics, investigation result for the α spectra character of thick source and the calibration method were described. The determination results for extracting process of 243 Am and 244 Cm by ion-exchange chromatography were given. The sensitivity of total adding amount for 243 Am using the 4π scintillation monitor is better than 0.1 μCi. The precision of 243 Am and 244 Cm concentration determination using Si(Au) monitor is +- 5%. The precision of the two metals contents in containers is about +- 10%

  4. Numerical investigation of a shot peening process by a finite element approach

    DEFF Research Database (Denmark)

    Liu, Hongsheng; Zhang, Xiaodan; Hansen, Niels

    2014-01-01

    Shot peening is a surface impact treatment widely used to improve the performance of a metal or a component. The better performance of the shot peened part is controlled by compressive residual stresses resulting from the plastic deformation of the surface layers by impacts of shot. The compressive...... residual stress is generally measured by X-ray diffraction. However, considerable cost and time are needed for such measurements. For this reason, in this work a 3D finite element (FE) model is introduced for a shot peening process. Through the FE simulations, the effect of process parameters...... such as damping ratio of material, friction coefficient, shot velocity and shot angle on the magnitude and distribution of the compressive residual stress is examined....

  5. Method of manufacturing iron aluminide by thermomechanical processing of elemental powders

    Science.gov (United States)

    Deevi, Seetharama C.; Lilly, Jr., A. Clifton; Sikka, Vinod K.; Hajaligol, Mohammed R.

    2000-01-01

    A powder metallurgical process of preparing iron aluminide useful as electrical resistance heating elements having improved room temperature ductility, electrical resistivity, cyclic fatigue resistance, high temperature oxidation resistance, low and high temperature strength, and/or resistance to high temperature sagging. The iron aluminide has an entirely ferritic microstructure which is free of austenite and can include, in weight %, 20 to 32% Al, and optional additions such as .ltoreq.1% Cr, .gtoreq.05% Zr or ZrO.sub.2 stringers extending perpendicular to an exposed surface of the heating element, .ltoreq.2% Ti, .ltoreq.2% Mo, .ltoreq.1% Zr, .ltoreq.1% C, .ltoreq.0.1% B, .ltoreq.30% oxide dispersoid and/or electrically insulating or electrically conductive covalent ceramic particles, .ltoreq.1 % rare earth metal, .ltoreq.1% oxygen, and/or .ltoreq.3% Cu. The process includes forming a mixture of aluminum powder and iron powder, shaping the mixture into an article such as by cold rolling the mixture into a sheet, and sintering the article at a temperature sufficient to react the iron and aluminum powders and form iron aluminide. The sintering can be followed by hot or cold rolling to reduce porosity created during the sintering step and optional annealing steps in a vacuum or inert atmosphere.

  6. Rolling Process Modeling Report: Finite-Element Prediction of Roll Separating Force and Rolling Defects

    Energy Technology Data Exchange (ETDEWEB)

    Soulami, Ayoub [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Lavender, Curt A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Paxton, Dean M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Burkes, Douglas [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2014-04-23

    Pacific Northwest National Laboratory (PNNL) has been investigating manufacturing processes for the uranium-10% molybdenum (U-10Mo) alloy plate-type fuel for the U.S. high-performance research reactors. This work supports the Convert Program of the U.S. Department of Energy’s National Nuclear Security Administration (DOE/NNSA) Global Threat Reduction Initiative. This report documents modeling results of PNNL’s efforts to perform finite-element simulations to predict roll separating forces and rolling defects. Simulations were performed using a finite-element model developed using the commercial code LS-Dyna. Simulations of the hot rolling of U-10Mo coupons encapsulated in low-carbon steel have been conducted following two different schedules. Model predictions of the roll-separation force and roll-pack thicknesses at different stages of the rolling process were compared with experimental measurements. This report discusses various attributes of the rolled coupons revealed by the model (e.g., dog-boning and thickness non-uniformity).

  7. Modelling of tunnelling processes and rock cutting tool wear with the particle finite element method

    Science.gov (United States)

    Carbonell, Josep Maria; Oñate, Eugenio; Suárez, Benjamín

    2013-09-01

    Underground construction involves all sort of challenges in analysis, design, project and execution phases. The dimension of tunnels and their structural requirements are growing, and so safety and security demands do. New engineering tools are needed to perform a safer planning and design. This work presents the advances in the particle finite element method (PFEM) for the modelling and the analysis of tunneling processes including the wear of the cutting tools. The PFEM has its foundation on the Lagrangian description of the motion of a continuum built from a set of particles with known physical properties. The method uses a remeshing process combined with the alpha-shape technique to detect the contacting surfaces and a finite element method for the mechanical computations. A contact procedure has been developed for the PFEM which is combined with a constitutive model for predicting the excavation front and the wear of cutting tools. The material parameters govern the coupling of frictional contact and wear between the interacting domains at the excavation front. The PFEM allows predicting several parameters which are relevant for estimating the performance of a tunnelling boring machine such as wear in the cutting tools, the pressure distribution on the face of the boring machine and the vibrations produced in the machinery and the adjacent soil/rock. The final aim is to help in the design of the excavating tools and in the planning of the tunnelling operations. The applications presented show that the PFEM is a promising technique for the analysis of tunnelling problems.

  8. Process evaluation of the Teamplay parenting intervention pilot: implications for recruitment, retention and course refinement.

    Science.gov (United States)

    Jago, Russell; Sebire, Simon J; Bentley, Georgina F; Turner, Katrina M; Goodred, Joanna K; Fox, Kenneth R; Stewart-Brown, Sarah; Lucas, Patricia J

    2013-12-01

    Parenting programs could provide effective routes to increasing children's physical activity and reducing screen-viewing. Many studies have reported difficulties in recruiting and retaining families in group parenting interventions. This paper uses qualitative data from the Teamplay feasibility trial to examine parents' views on recruitment, attendance and course refinement. Semi-structured interviews were conducted with 16 intervention and 10 control group parents of 6-8 year old children. Topics discussed with the intervention group included parents' views on the recruitment, structure, content and delivery of the course. Topics discussed with the control group included recruitment and randomization. Interviews were digitally recorded, transcribed and thematically analyzed. Many parents in both the intervention and control group reported that they joined the study because they had been thinking about ways to improve their parenting skills, getting ideas on how to change behavior, or had been actively looking for a parenting course but with little success in enrolling on one. Both intervention and control group parents reported that the initial promotional materials and indicative course topics resonated with their experiences and represented a possible solution to parenting challenges. Participants reported that the course leaders played an important role in helping them to feel comfortable during the first session, engaging anxious parents and putting parents at ease. The most commonly reported reason for parents returning to the course after an absence was because they wanted to learn new information. The majority of parents reported that they formed good relationships with the other parents in the group. An empathetic interaction style in which leaders accommodated parent's busy lives appeared to impact positively on course attendance. The data presented indicate that a face-to-face recruitment campaign which built trust and emphasized how the program was

  9. Flow Dynamics of green sand in the DISAMATIC moulding process using Discrete element method (DEM)

    International Nuclear Information System (INIS)

    Hovad, E; Walther, J H; Thorborg, J; Hattel, J H; Larsen, P

    2015-01-01

    The DISAMATIC casting process production of sand moulds is simulated with DEM (discrete element method). The main purpose is to simulate the dynamics of the flow of green sand, during the production of the sand mould with DEM. The sand shot is simulated, which is the first stage of the DISAMATIC casting process. Depending on the actual casting geometry the mould can be geometrically quite complex involving e.g. shadowing effects and this is directly reflected in the sand flow during the moulding process. In the present work a mould chamber with “ribs” at the walls is chosen as a baseline geometry to emulate some of these important conditions found in the real moulding process. The sand flow is simulated with the DEM and compared with corresponding video footages from the interior of the chamber during the moulding process. The effect of the rolling resistance and the static friction coefficient is analysed and discussed in relation to the experimental findings. (paper)

  10. Composite lay-up process with application of elements of augmented reality

    Science.gov (United States)

    Novák-Marcinčin, Jozef; Barna, Jozef; Janák, Miroslav; Fečová, Veronika; Nováková-Marcinčinová, L'udmila

    2012-03-01

    This article deals with virtual tools based on principles of open source philosophy in implementation area of composite lay-up technology. It describes virtual software and hardware elements that are necessary for work in augmented reality environment. In the beginning it focuses on general problems of applications of virtual components and in composite lay-up process. It clarifies the fundamental philosophy of new created application and the process called visual scripting that was used for program development. Further it provides closer view on particular logical sections, where necessary data are harvested and compared with values from virtual arrays. Also the new device is described with adjustment of operating desk, what enables detailed control of any realized manufacturing process. This positioning table can determine and set the position of the working plane using the commands in computer interface or manual changes. Information about exact position of individual layers are obtained in real time thanks to the built-in sensors. One of them manages the data change of the desk position (X, Y, Z), other checks the rotation around main axis situated in the center of the table. New software consists of 4 main logical areas with data packets comming from internal computer components as well as from external devices. In the end the displaying section is able to realize the movement process of virtual item (composite layer) according to its trajectory. Article presents new attitude in realization of composite lay-up process. Finally it deals with possible future improvements and other application possibilities.

  11. Target costing as an element of the hard coal extraction cost planning process

    Directory of Open Access Journals (Sweden)

    Katarzyna Segeth-Boniecka

    2017-09-01

    Full Text Available Target costing as an element of the hard coal extraction cost planning process Striving for the efficiency of activities is of great significance in the management of hard coal extractive enterprises, which are constantly subjected to the process of restructuring. Effective cost management is an important condition of the increase in the efficiency of the researched business entities’ activity. One of the tools whose basic objective is conscious influencing cost levels is target costing. The aim of this article is to analyse the conditions of implementing target costing in the planning of hard coal extraction costs in hard coal mines in Poland. The subject area raises a topical and important problem of the scope of solutions concerning cost analysis in hard coal mines in Poland, which has not been thoroughly researched yet. To achieve the abovementioned aim, the theoretical works of the subject area have been referenced. The mine management process is difficult and requires the application of best suited and most modern tools, including those used in the planning process of hard coal extraction costs in order to support the economic efficiency of mining operations. The use of the target costing concept in the planning of hard coal mine operations aims to support the decision-making process, so as to achieve a specified level of economic efficiency of the operations carried out in a territorially designated site of hard coal extraction.

  12. Finite Element Simulation of the Presta Joining Process for Assembled Camshafts: Application to Aluminum Shafts

    Directory of Open Access Journals (Sweden)

    Robert Scherzer

    2018-02-01

    Full Text Available This work shows a sequence of numerical models for the simulation of the Presta joining process: a well-established industrial process for manufacturing assembled camshafts. The operation is divided into two sub-steps: the rolling of the shaft to widen the cam seat and the joining of the cam onto the shaft. When manufactured, the connection is tested randomly by loading it with a static torque. Subsequently, there are three numerical models using the finite element method. Additionally, a material model of finite strain viscoplasticity with nonlinear kinematic hardening is used throughout the whole simulation process, which allows a realistic representation of the material behavior even for large deformations. In addition, it enables a transfer of the deformation history and of the internal stresses between different submodels. This work also shows the required parameter identification and the associated material tests. After comparing the numerical results with experimental studies of the manufacturing process for steel-steel connections, the models are used to extend the joining process to the utilization of aluminum shafts.

  13. [Parenting styles].

    Science.gov (United States)

    Torío López, Susana; Peña Calvo, José Vicente; Inda Caro, Mercedes

    2008-02-01

    Parental educational styles constitute one of the key elements of family socialization. The aim of the present essay is to present the results of a research project carried out in the Principality of Asturias (Spain) among 2,965 families with children of infant and primary-school age (5-8 years old). This research attempts to analyse, among other aspects, parental behaviour tendencies in child upbringing. The analysis of the results obtained allows us to: 1) identify the most common attitudinal and behavioural tendencies of parents in the upbringing of their children; 2) determine how many people have a well defined parental style, and delimit their socio-educational characteristics. Lastly, we consider the need to change some parental behaviour patterns and stress the importance of family education programmes, with the aim of promoting appropriate parenting models and modifying or improving current practices.

  14. Relationship of microbial processes to the fate and behavior of transuranic elements in soils, plants, and animals

    International Nuclear Information System (INIS)

    Wildung, R.E.; Garland, T.R.

    1980-01-01

    Soil physicochemical and microbial processes influence the long-term solubility, form, and bioavailability of plutonium and other transuranic elements important in the nuclear fuel cycle. Consideration is given to the chemistry/microbiology of the transuranic elements in soil, emphasizing possible organic complexation reactions in soils and plants and the relationship of these phenomena to gastrointestinal absorption

  15. Incidence of Parental Support and Pressure on Their Children’s Motivational Processes towards Sport Practice Regarding Gender

    Science.gov (United States)

    Amado, Diana

    2015-01-01

    Grounded in Self-Determination Theory, structural equation modeling (SEM) with the aim of examining how parental support/pressure could influence their children´s motivational processes in sport was conducted, as well as the models´ differences in operability regarding gender. The sample size was 321 children ranging in age from 10 to 16 years old who were athletes from Extremadura, and 321 parents (included only the father or mother more involved with the sport of his or her child). 175 participants were male and 146 were female from individual (n = 130), and team sports (n=191). A questionnaire was conducted to assess parental perception of support/pressure and another questionnaire was conducted to measure satisfaction of basic psychological needs, type of motivation and enjoyment/boredom showed by their children towards sport practice. Results revealed that parental pressure negatively predicted satisfaction of the basic psychological needs. It also emerged as a strong positive predictor of intrinsic motivation and negative predictor of amotivation. Moreover, intrinsic motivation emerged as positive predictor of enjoyment and a negative predictor of boredom, whereas amotivation positively predicted boredom and negatively predicted enjoyment. Furthermore, results showed there were mean differences by gender: male athletes perceived greater parental pressure. Hence, it is necessary to decrease parental pressure towards their children in sport, with the aim of making them more motivated and enjoy, promoting positive consequences. PMID:26039062

  16. Family identification: A beneficial process for young adults who grow up in homes affected by parental intimate partner violence

    Directory of Open Access Journals (Sweden)

    Catherine Mary Naughton

    2015-08-01

    Full Text Available Exposure to parental intimate partner violence (parental IPV is a complex trauma. Research within social psychology establishes that identification with social groups impacts positively on how we appraise, respond to and recover from traumatic events. Intimate partner violence (IPV is also a highly stigmatized social phenomenon and social isolation is a major factor for families affected by IPV, yet strong identification with the family group may act as a beneficial psychological resource to young people who grew up in homes affected by IPV. The current study, an online survey of 355 students (M age = 20, 70% female, investigated if a psychosocial process, specifically identification with the family, may influence the relationship between the predictor, exposure to parental IPV, and outcomes, global self-esteem and state anxiety. Mediation analysis suggests that identification with the family has a positive influence on the relationship between exposure to parental IPV and psychological outcomes; exposure to parental IPV results in reduced family identification, but when family identification is strong it results in both reduced anxiety and increased self-esteem for young people. The findings highlight the importance of having a strong sense of belonging to the extended family for young people who were exposed to parental IPV, thus has implications for prevention, intervention and social policy.

  17. Research results on productivity stabilization by ultrasonic camera (plant with membrane ceramic elements during vine processing

    Directory of Open Access Journals (Sweden)

    V. T. Antufyev

    2016-01-01

    Full Text Available The article describes solutions to the problems of declining productivity of ceramic membrane elements for wine processing on the final manufacturing phase. A relative stabilization of filtration velocity, venting efficiency and wine lightening were experimentally confirmed during contacts with oscillation waves of ultrasonic transmitter on the ceramic filter. Which significantly reduced the cost of various preservatives to increase periods storage. To study the processes of wine processing by the proposed method it was made an experimental installation on the basis of pilot machine MRp-1/2 for bottling of quiet liquids and an ultrasonic device "Volna– M" UZTA-1/22-OM with a firmly, waveguide which transmits sound, fixed filter frame on the ultrasound emitter. To stabilize the performance of ultrasonic units with ceramic membrane elements without quality deterioration of wines it was empirically determined rational parameters of power of ultrasound input and pressure in the system. The given derived dependencies and graphs allow to define the time of relatively stable operating filter regime. It was revealed a significant cost reduction on filtration, as it allows escape from the contamination of the product by various preservatives, and increasing of storage duration in a sealed container during aseptic filling without a thermal sterilization. Ultrasonic emitter contact by superposition wave vibrations on the ceramic filter increases not only the efficiency of gas removal, but also improves the organoleptic characteristics, stabilizes the filters, improves their productivity. Gas removal creates unfavorable conditions for development of the yeast, which in turn increases the shelf life of semisweet wine.

  18. Long gamma-ray burst as a production site of r-process elements

    International Nuclear Information System (INIS)

    Nakamrua, Ko; Harikae, Seiji; Kajino, Toshitaka; Mathews, Grant J.

    2012-01-01

    We simulated the r-process nucleosynthesis in and around a high entropy jet from a long gamma-ray burst (GRB). Our simulation is based on the collapsar scenario for long GRBs and on relativistic magnetohydrodynamic simulations (Harikae et al. 2009, 2010) including ray-tracing neutrino transport, which describe the development of the black hole accretion disk and the heating of the funnel region to produce a relativistic jet. The time evolution of the jet was then extended to later phase via axi-symmetric special relativistic hydrodynamic simulation to follow the temperature, entropy, electron fraction, and density evolution for representative test particles. The evolution of nuclear abundances from nucleons to heavy nuclei for representative test particle trajectories was solved in a large nuclear reaction network including more than 5000 isotopes. We show that a robust r-process successfully occurs within the collapsar jet outflow and that sufficient mass is ejected within the flow to account for the observed r-process abundance distribution along with the large dispersion in r-process elements observed in metal-poor halo stars.

  19. Effects of industrial processing on essential elements and regulated and emerging contaminant levels in seafood.

    Science.gov (United States)

    Rasmussen, Rie Romme; Søndergaard, Annette Bøge; Bøknæs, Niels; Cederberg, Tommy Licht; Sloth, Jens Jørgen; Granby, Kit

    2017-06-01

    Mitigation of contaminants in industrial processing was studied for prawns (cooked and peeled), Greenland halibut (cold smoked) and Atlantic salmon (cold smoked and trimmed). Raw prawns had significantly higher cadmium, chromium, iron, selenium and zinc content in autumn than in spring, while summer levels typically were intermediate. Peeling raw prawns increased mercury concentration but reduced the concentration of all other elements including inorganic arsenic, total arsenic, chromium, zinc, selenium but especially cadmium, copper and iron (p processing was observed. Non-toxic organic arsenic in raw Greenland halibut (N = 10) and salmon (N = 4) did not transform to carcinogenic inorganic arsenic during industrial cold smoking. Hence inorganic arsenic was low (Processing salmon did not significantly change any levels (calculated both per wet weight, dry weight or lipid content). Cold smoking decreased total arsenic (17%) and increased PCB congeners (10-22%) in Greenland halibut (wet weight). However PFOS, PCB and PBDE congeners were not different in processed Greenland halibut when corrected for water loss or lipid content. Copyright © 2017 Elsevier Ltd. All rights reserved.

  20. Application of three dimensional finite element modeling for the simulation of machining processes

    International Nuclear Information System (INIS)

    Fischer, C.E.; Wu, W.T.; Chigurupati, P.; Jinn, J.T.

    2004-01-01

    For many years, metal cutting simulations have been performed using two dimensional approximations of the actual process. Factors such as chip morphology, cutting force, temperature, and tool wear can all be predicted on the computer. However, two dimensional simulation is limited to processes which are orthogonal, or which can be closely approximated as orthogonal.Advances in finite element technology, coupled with continuing improvement in the availability of low cost, high performance computer hardware, have made the three dimensional simulation of a large variety of metal cutting processes practical. Specific improvements include efficient FEM solvers, and robust adaptive remeshing. As researchers continue to gain an improved understanding of wear, material representation, tool coatings, fracture, and other such phenomena, the machining simulation system also must adapt to incorporate these evolving models.To demonstrate the capabilities of the 3D simulation system, a variety of drilling, milling, and turning processes have been simulated and will be presented in this paper. Issues related to computation time and simulation accuracy will also be addressed

  1. Finite element modelling of process-integrated powder coating by radial axial rolling of rings

    International Nuclear Information System (INIS)

    Frischkorn, J.; Kebriaei, R.; Reese, S.; Moll, H.; Theisen, W.; Husmann, T.; Meier, H.

    2011-01-01

    The process-integrated powder coating by radial axial rolling of rings represents a new hybrid production technique applied in the manufacturing of large ring-shaped work pieces with functional layers. It is thought to break some limitations that come along with the hot isostatic pressing (HIP) which is used nowadays to apply the powdery layer material onto the rolled substrate ring. Within the new process the compaction of the layer material is integrated into the ring rolling and HIP becomes dispensable. Following this approach the rolling of such compound rings brings up some new challenges. The volume of a solid ring stays nearly constant during the rolling. This behaviour can be exploited to determine the infeed of the rollers needed to reach the desired ring shape. Since volume consistency cannot be guaranteed for the rolling of a compound ring the choice of appropriate infeed of the rollers is still an open question. This paper deals with the finite element (FE) simulation of this new process. First, the material model that is used to describe the compaction of the layer material is shortly reviewed. The main focus of the paper is then put on a parameterized FE ring rolling model that incorporates a control system in order to stabilize the process. Also the differences in the behaviour during the rolling stage between a compound and a solid ring will be discussed by means of simulation results.

  2. Coal fly ash basins as an attractive nuisance to birds: Parental provisioning exposes nestlings to harmful trace elements

    International Nuclear Information System (INIS)

    Bryan, A.L.; Hopkins, W.A.; Parikh, J.H.; Jackson, B.P.; Unrine, J.M.

    2012-01-01

    Birds attracted to nest around coal ash settling basins may expose their young to contaminants by provisioning them with contaminated food. Diet and tissues of Common Grackle (Quiscalus quiscala) nestlings were analyzed for trace elements to determine if nestlings were accumulating elements via dietary exposure and if feather growth limits elemental accumulation in other tissues. Arsenic, cadmium, and selenium concentrations in ash basin diets were 5× higher than reference diets. Arsenic, cadmium, and selenium concentrations were elevated in feather, liver, and carcass, but only liver Se concentrations approached levels of concern. Approximately 15% of the total body burden of Se, As, and Cd was sequestered in feathers of older (>5 days) nestlings, whereas only 1% of the total body burden of Sr was sequestered in feathers. Feather concentrations of only three elements (As, Se, and Sr) were correlated with liver concentrations, indicating their value as non-lethal indicators of exposure. - Highlights: ► We examined elemental uptake by grackle nestlings associated with coal ash basins. ► Diet of ash basin nestlings had higher levels of Se, As, and Cd than control nestlings. ► Se, As, Cd, and Sr concentrations of ash basin nestling tissues were elevated. ► Only Se in nestling liver approached published levels of concern. ► Nestling feathers sequestered >15% of the total body burden of Se, As, and Cd. - Nestlings of common grackles attracted to nest around coal ash settling basins were exposed to elevated dietary Se, As, Cd, and Sr, resulting in elevated Se tissue concentrations approaching reported levels of concern.

  3. Three-dimensional ultrasonic imaging of concrete elements using different SAFT data acquisition and processing schemes

    International Nuclear Information System (INIS)

    Schickert, Martin

    2015-01-01

    Ultrasonic testing systems using transducer arrays and the SAFT (Synthetic Aperture Focusing Technique) reconstruction allow for imaging the internal structure of concrete elements. At one-sided access, three-dimensional representations of the concrete volume can be reconstructed in relatively great detail, permitting to detect and localize objects such as construction elements, built-in components, and flaws. Different SAFT data acquisition and processing schemes can be utilized which differ in terms of the measuring and computational effort and the reconstruction result. In this contribution, two methods are compared with respect to their principle of operation and their imaging characteristics. The first method is the conventional single-channel SAFT algorithm which is implemented using a virtual transducer that is moved within a transducer array by electronic switching. The second method is the Combinational SAFT algorithm (C-SAFT), also named Sampling Phased Array (SPA) or Full Matrix Capture/Total Focusing Method (TFM/FMC), which is realized using a combination of virtual transducers within a transducer array. Five variants of these two methods are compared by means of measurements obtained at test specimens containing objects typical of concrete elements. The automated SAFT imaging system FLEXUS is used for the measurements which includes a three-axis scanner with a 1.0 m × 0.8 m scan range and an electronically switched ultrasonic array consisting of 48 transducers in 16 groups. On the basis of two-dimensional and three-dimensional reconstructed images, qualitative and some quantitative results of the parameters image resolution, signal-to-noise ratio, measurement time, and computational effort are discussed in view of application characteristics of the SAFT variants

  4. Process and equipment for locating defective fuel rods of a reactor fuel element

    International Nuclear Information System (INIS)

    Jester, A.; Honig, H.

    1977-01-01

    By this equipment, well-known processes for determining defective fuel rods of a reactor fuel element are improved in such a fashion that defective fuel rods can be located individually, so that it is possible to replace them. The equipment consists of a cylindrical test vessel open above, which accommodates the element to be tested, so that an annular space is left between the latter's external circumference and the wall of the vessel, and so that the fuel rods project above the vessel. A bell in the shape of a frustrum of a cone is inverted over the test vessel, which has an infra-red measuring equipment at a certain distance above the tops of the fuel rods. The fuel element to be tested together with the test vessel and hood are immersed in a basin full of water, which displaces water by means of gas from the hood. The post-shutdown heat increases the temperature in the water space of the test vessel, which is stabilised at 100 0 C. In each defective fuel rod the water which has penetrated the defective fuel rod previously, or does so now, starts to boil. The steam rising in the fuel rod raises the temperature of the defective fuel rod compared to all the sound ones. The subsequent measurement easily determines this. Where one can expect interference with the measurement by appreciable amounts of gamma rays, the measuring equipment is removed from the path of radiation by mirror deflection in a suitably shaped measuring hood. (FW) [de

  5. Finite element analysis of the combined fine blanking and extrusion process

    Science.gov (United States)

    Zheng, Peng-Fei

    The combined fine blanking and extrusion process is such a metal forming process that fine blanking and forward extrusion are carried out on sheet metal material at the same time. There are two typical characteristics in this process, one is the fine blanking whose deformation mechanism is different from conventional blanking; the other is the sheet metal extrusion, which is different from the conventional extrusion. Even though fine blanking has been used in industry for many years, only limited literature can be found which deals with the theoretical analysis of it. On the other hand, no publications on the theoretical analysis of the sheet metal extrusion have been found. Intensive work should be carried out to reveal the mechanism of both fine blanking process and sheet metal extrusion process, and further the combined fine blanking and extrusion process. The scope of this thesis is to study the mechanics of fine blanking, sheet metal extrusion, and combined fine blanking and extrusion process one by one with the rigid-plastic finite element method. All of above processes are typical unsteady ones, especially the fine blanking process in which extremely severe and localized deformation occurs. Therefore, commercial programs can not be used to solve these problems up till now. Owing to this reason, a rigid-plastic finite element program was developed for simulating these processes where remeshing and mesh tracing techniques as well as the golden section method were adopted according to the characteristics of these processes in this thesis. Moreover, a permissible kinematic velocity field was adopted as the initial velocity field for simulating extrusion process successfully. Results from the simulation included the distorted mesh, the field of material flow, the stress and the strain distributions at various moments of deformation. Results under different deformation conditions such as different blanking clearances, different diameters of the extrusion punch and

  6. Spheronization process particle kinematics determined by discrete element simulations and particle image velocimentry measurements.

    Science.gov (United States)

    Koester, Martin; García, R Edwin; Thommes, Markus

    2014-12-30

    Spheronization is an important pharmaceutical manufacturing technique to produce spherical agglomerates of 0.5-2mm diameter. These pellets have a narrow size distribution and a spherical shape. During the spheronization process, the extruded cylindrical strands break in short cylinders and evolve from a cylindrical to a spherical state by deformation and attrition/agglomeration mechanisms. Using the discrete element method, an integrated modeling-experimental framework is presented, that captures the particle motion during the spheronization process. Simulations were directly compared and validated against particle image velocimetry (PIV) experiments with monodisperse spherical and dry γ-Al2O3 particles. demonstrate a characteristic torus like flow pattern, with particle velocities about three times slower than the rotation speed of the friction plate. Five characteristic zones controlling the spheronization process are identified: Zone I, where particles undergo shear forces that favors attrition and contributes material to the agglomeration process; Zone II, where the static wall contributes to the mass exchange between particles; Zone III, where gravitational forces combined with particle motion induce particles to collide with the moving plate and re-enter Zone I; Zone IV, where a subpopulation of particles are ejected into the air when in contact with the friction plate structure; and Zone V where the low poloidal velocity favors a stagnant particle population and is entirely controlled by the batch size. These new insights in to the particle motion are leading to deeper process understanding, e.g., the effect of load and rotation speed to the pellet formation kinetics. This could be beneficial for the optimization of a manufacturing process as well as for the development of new formulations. Copyright © 2014 Elsevier B.V. All rights reserved.

  7. Relationship of microbial processes to the fate and behavior of transuranic elements in soils, plants, and animals

    International Nuclear Information System (INIS)

    Wildung, R.E.; Garland, T.R.

    1977-10-01

    This review considers the influence of soil physicochemical and microbial processes on the long-term solubility, form, and bioavailability of plutonium and other transuranic elements important in the nuclear fuel cycle. Emphasis is placed on delineation of the relationships between soil chemical and microbial processes and the role of soil microorganisms in effecting solubilization, transformation and plant/animal uptake of elements considered largely insoluble in soils strictly on the basis of their inorganic chemical characteristics

  8. Three-dimensional photoacoustic tomography based on graphics-processing-unit-accelerated finite element method.

    Science.gov (United States)

    Peng, Kuan; He, Ling; Zhu, Ziqiang; Tang, Jingtian; Xiao, Jiaying

    2013-12-01

    Compared with commonly used analytical reconstruction methods, the frequency-domain finite element method (FEM) based approach has proven to be an accurate and flexible algorithm for photoacoustic tomography. However, the FEM-based algorithm is computationally demanding, especially for three-dimensional cases. To enhance the algorithm's efficiency, in this work a parallel computational strategy is implemented in the framework of the FEM-based reconstruction algorithm using a graphic-processing-unit parallel frame named the "compute unified device architecture." A series of simulation experiments is carried out to test the accuracy and accelerating effect of the improved method. The results obtained indicate that the parallel calculation does not change the accuracy of the reconstruction algorithm, while its computational cost is significantly reduced by a factor of 38.9 with a GTX 580 graphics card using the improved method.

  9. The effect of innovation competence on the choice of information elements in a simulated NPD process

    DEFF Research Database (Denmark)

    Søndergaard, Helle Alsted; Juhl, Hans Jørn

    to prompt different managerial behaviour. This study uses a role-play approach to investigating the relationship between innovation competence (exploitation or exploration competences) and the acquisition of information elements in a simulated new product development (NPD) process. Results show that two......This paper presents a study of the relationship between innovation competence and managerial behaviour. Within the resource-based view of the firm the development of new products is often related to the attainment of dynamic capabilities. Different levels of dynamic capabilities are expected...... distinct clusters can be identified among respondents, one cluster with both exploitation and exploration competence experience and a second cluster only with exploitation competence experience. Contrary to expectations analysis of variance and Chi-square tests for independence show that there are no clear...

  10. Cost-effective large-scale fabrication of diffractive optical elements by using conventional semiconducting processes.

    Science.gov (United States)

    Yoo, Seunghwan; Song, Ho Young; Lee, Junghoon; Jang, Cheol-Yong; Jeong, Hakgeun

    2012-11-20

    In this article, we introduce a simple fabrication method for SiO(2)-based thin diffractive optical elements (DOEs) that uses the conventional processes widely used in the semiconductor industry. Photolithography and an inductively coupled plasma etching technique are easy and cost-effective methods for fabricating subnanometer-scale and thin DOEs with a refractive index of 1.45, based on SiO(2). After fabricating DOEs, we confirmed the shape of the output light emitted from the laser diode light source and applied to a light-emitting diode (LED) module. The results represent a new approach to mass-produce DOEs and realize a high-brightness LED module.

  11. Process development for elemental recovery from PGM tailings by thermochemical treatment: Preliminary major element extraction studies using ammonium sulphate as extracting agent.

    Science.gov (United States)

    Mohamed, Sameera; van der Merwe, Elizabet M; Altermann, Wladyslaw; Doucet, Frédéric J

    2016-04-01

    Mine tailings can represent untapped secondary resources of non-ferrous, ferrous, precious, rare and trace metals. Continuous research is conducted to identify opportunities for the utilisation of these materials. This preliminary study investigated the possibility of extracting major elements from South African tailings associated with the mining of Platinum Group Metals (PGM) at the Two Rivers mine operations. These PGM tailings typically contain four major elements (11% Al2O3; 12% MgO; 22% Fe2O3; 34% Cr2O3), with lesser amounts of SiO2 (18%) and CaO (2%). Extraction was achieved via thermochemical treatment followed by aqueous dissolution, as an alternative to conventional hydrometallurgical processes. The thermochemical treatment step used ammonium sulphate, a widely available, low-cost, recyclable chemical agent. Quantification of the efficiency of the thermochemical process required the development and optimisation of the dissolution technique. Dissolution in water promoted the formation of secondary iron precipitates, which could be prevented by leaching thermochemically-treated tailings in 0.6M HNO3 solution. The best extraction efficiencies were achieved for aluminium (ca. 60%) and calcium (ca. 80%). 35% iron and 32% silicon were also extracted, alongside chromium (27%) and magnesium (25%). Thermochemical treatment using ammonium sulphate may therefore represent a promising technology for extracting valuable elements from PGM tailings, which could be subsequently converted to value-added products. However, it is not element-selective, and major elements were found to compete with the reagent to form water-soluble sulphate-metal species. Further development of this integrated process, which aims at achieving the full potential of utilisation of PGM tailings, is currently underway. Copyright © 2016 Elsevier Ltd. All rights reserved.

  12. Processes controlling trace element geochemistry of Arabian Sea sediments during the last 25,000 years

    Science.gov (United States)

    Sirocko, Frank; Garbe-Schönberg, Dieter; Devey, Colin

    2000-11-01

    Thirty seven deep-sea sediment cores from the Arabian Sea were studied geochemically (49 major and trace elements) for four time slices during the Holocene and the last glacial, and in one high sedimentation rate core (century scale resolution) to detect tracers of past variations in the intensity of the atmospheric monsoon circulation and its hydrographic expression in the ocean surface. This geochemical multi-tracer approach, coupled with additional information on the grain size composition of the clastic fraction, the bulk carbonate and biogenic opal contents makes it possible to characterize the sedimentological regime in detail. Sediments characterized by a specific elemental composition (enrichment) originated from the following sources: river suspensions from the Tapti and Narbada, draining the Indian Deccan traps (Ti, Sr); Indus sediments and dust from Rajasthan and Pakistan (Rb, Cs); dust from Iran and the Persian Gulf (Al, Cr); dust from central Arabia (Mg); dust from East Africa and the Red Sea (Zr/Hf, Ti/Al). C org, Cd, Zn, Ba, Pb, U, and the HREE are associated with the intensity of upwelling in the western Arabian Sea, but only those patterns that are consistently reproduced by all of these elements can be directly linked with the intensity of the southwest monsoon. Relying on information from a single element can be misleading, as each element is affected by various other processes than upwelling intensity and nutrient content of surface water alone. The application of the geochemical multi-tracer approach indicates that the intensity of the southwest monsoon was low during the LGM, declined to a minimum from 15,000-13,000 14C year BP, intensified slightly at the end of this interval, was almost stable during the Bölling, Alleröd and the Younger Dryas, but then intensified in two abrupt successions at the end of the Younger Dryas (9900 14C year BP) and especially in a second event during the early Holocene (8800 14C year BP). Dust discharge by

  13. Detailed Modeling and Irreversible Transfer Process Analysis of a Multi-Element Thermoelectric Generator System

    Science.gov (United States)

    Xiao, Heng; Gou, Xiaolong; Yang, Suwen

    2011-05-01

    Thermoelectric (TE) power generation technology, due to its several advantages, is becoming a noteworthy research direction. Many researchers conduct their performance analysis and optimization of TE devices and related applications based on the generalized thermoelectric energy balance equations. These generalized TE equations involve the internal irreversibility of Joule heating inside the thermoelectric device and heat leakage through the thermoelectric couple leg. However, it is assumed that the thermoelectric generator (TEG) is thermally isolated from the surroundings except for the heat flows at the cold and hot junctions. Since the thermoelectric generator is a multi-element device in practice, being composed of many fundamental TE couple legs, the effect of heat transfer between the TE couple leg and the ambient environment is not negligible. In this paper, based on basic theories of thermoelectric power generation and thermal science, detailed modeling of a thermoelectric generator taking account of the phenomenon of energy loss from the TE couple leg is reported. The revised generalized thermoelectric energy balance equations considering the effect of heat transfer between the TE couple leg and the ambient environment have been derived. Furthermore, characteristics of a multi-element thermoelectric generator with irreversibility have been investigated on the basis of the new derived TE equations. In the present investigation, second-law-based thermodynamic analysis (exergy analysis) has been applied to the irreversible heat transfer process in particular. It is found that the existence of the irreversible heat convection process causes a large loss of heat exergy in the TEG system, and using thermoelectric generators for low-grade waste heat recovery has promising potential. The results of irreversibility analysis, especially irreversible effects on generator system performance, based on the system model established in detail have guiding significance for

  14. Finite element simulation of HIP-process to produce 3d near net shape parts

    International Nuclear Information System (INIS)

    Zadeh, M.K.

    1996-01-01

    One of the major problems when producing powder metallurgy parts through hot isostatic pressing (HIP) is the non homogeneous shrinkage of HIP-capsule during the process. This leads to time and cost consuming machining of the HIP parts. In order to reduce the machining to a minimum, one can try to simulate the HIP-process by means of numerical methods. Hereby, the part distortion can be predicted, and hence a new HIP-capsule can be designed in such a way to prevent the distortion partly or even completely. In the following, a finite element method is used, on one hand, to simulate part shrinkage during HIP process; on the other hand a method is integrated in this simulation to optimize the HIP-capsule geometry. For the determination of material dependent parameters, a mixture of theoretical and experimental methods is used. Results of simulation are verified for a complex 3d HIP part out of TiAl6V4

  15. Transactional processes in children born preterm: Influences of mother-child interactions and parenting stress.

    Science.gov (United States)

    Gerstein, Emily D; Poehlmann-Tynan, Julie

    2015-10-01

    This prospective, longitudinal study examined the transactional relations among perceived maternal parenting stress, maternal insensitivity, and child behavior across toddlerhood through age 6 within families of a child born preterm. A sample of 173 mother-child dyads were followed from just before the infant was discharged from the neonatal intensive care unit to 6 years of age, with observational measurements of maternal insensitivity and child noncompliance (24 and 36 months), maternal self-reports of perceived parenting stress (24 months, 36 months, 6 years), and maternal reports of child externalizing behavior at 6 years. Results indicated that maternal insensitivity at 36 months significantly mediated the relation between parenting stress at 24 months and externalizing behaviors at 6 years. Parenting stress was also directly associated with child noncompliance at 36 months and with child externalizing behavior at 6 years. Neonatal risk was associated with increased maternal insensitivity at 24 months, but also decreased parenting stress at 24 months. No significant "child effects" from child behavior to either maternal insensitivity or parenting stress were found. Parenting stress appears to play a critical role for children born preterm, and it is associated with children's behavior both directly and through its influence on parenting. The role of neonatal risk needs continued investigation, as families traditionally considered to be at lower risk may still face significant challenges. (c) 2015 APA, all rights reserved).

  16. Culturally and Linguistically Diverse Parents' Perceptions of the IEP Process

    Science.gov (United States)

    Wolfe, Katie; Durán, Lillian K.

    2013-01-01

    Many parents of students with disabilities face barriers to meaningful participation in Individualized Education Plan (IEP) meetings; parents who are culturally and linguistically diverse (CLD) encounter additional challenges. Given the changing demographics of the United States and the central role of the IEP in special education, it is important…

  17. Parent-Child and Triadic Antecedents of Children's Social Competence: Cultural Specificity, Shared Process

    Science.gov (United States)

    Feldman, Ruth; Masalha, Shafiq

    2010-01-01

    Guided by theories of cultural participation, the authors examined mother-child, father-child, and triadic interactive behaviors in 141 Israeli and Palestinian couples and their firstborn child at 5 and 33 months as antecedents of children's social competence. Four parent-child measures (parent sensitivity, child social engagement, parental…

  18. Parenting intervention and the caregiving environment : cumulative risk and process evaluation

    NARCIS (Netherlands)

    Stolk, Mirjam Neeltje

    2007-01-01

    The objective of the research described in this thesis was to study single and cumulative family risk in relation to early childhood externalizing problems and the effectiveness of a parenting intervention program. The Video-feedback Intervention to promote Positive Parenting and Sensitive

  19. Hearing Parents of Children with Hearing Loss: Perceptions of the IEP Process

    Science.gov (United States)

    Stegman, Robin Fern

    2016-01-01

    Under federal guidelines, parents of school-aged children with hearing loss are required to attend an individualized education program (IEP) meeting on behalf of their child. However, it remains unclear how prepared hearing parents are to oversee development of IEPs that guarantee their children the best educational outcomes, as well as how much…

  20. Parenting Processes and Dating Violence: The Mediating Role of Self-Esteem in Low- and High-SES Adolescents

    Science.gov (United States)

    Pflieger, Jacqueline C.; Vazsonyi, Alexander T.

    2006-01-01

    The current investigation tested a model in which low self-esteem mediated the effects by parenting processes (monitoring, closeness, and support) on measures of dating violence (victimization, perpetration, attitudes, and perceptions) in a sample of adolescents (n=809; mean age=16.4 years) from both low- and high-socioeconomic (SES) backgrounds.…

  1. Perceived Parenting Dimensions and Identity Styles: Exploring the Socialization of Adolescents' Processing of Identity-Relevant Information

    Science.gov (United States)

    Smits, Ilse; Soenens, Bart; Luyckx, Koen; Duriez, Bart; Berzonsky, Michael; Goossens, Luc

    2008-01-01

    This study examined the relationships between crucial dimensions of perceived parenting (support, behavioral control, and psychological control) and the three identity styles defined by Berzonsky [Berzonsky, M. D. (1990). "Self-construction over the life span: A process perspective on identity formation." "Advances in Personal Construct…

  2. Shaping internal working models : parental love withdrawal, oxytocin, and asymmetric frontal brain activity affect socio-emotional information processing

    NARCIS (Netherlands)

    Huffmeijer, Renske

    2011-01-01

    The aim of this thesis is to gain insight into the associations between experiences of parental love withdrawal, oxytocin, and asymmetric frontal brain activity (reflecting basic motivational tendencies) on the one hand, and (neural) processing of and responses to socio-emotional stimuli on the

  3. Protecting Children from the Consequences of Divorce: A Longitudinal Study of the Effects of Parenting on Children's Coping Processes

    Science.gov (United States)

    Velez, Clorinda E.; Wolchik, Sharlene A.; Tein, Jenn-Yun; Sandler, Irwin

    2011-01-01

    This study examines whether intervention-induced changes in mother-child relationship quality and discipline led to short-term (6 months) and long-term (6 years) changes in children's coping processes in a sample of 240 youth aged 9-12 years when assessed initially. Data were from a randomized, experimental trial of a parenting-focused preventive…

  4. The Decision-Making Processes of Early Childhood Teachers When Working with Children Experiencing Parental Separation and Divorce

    Science.gov (United States)

    Mahony, L.; Lunn, J.; Petriwskyj, A.; Walsh, K.

    2015-01-01

    In this study, the pedagogical decision-making processes of 21 Australian early childhood teachers working with children experiencing parental separation and divorce were examined. Transcripts from interviews and a focus group with teachers were analysed using grounded theory methodology. The findings showed that as teachers interacted with young…

  5. “If it Feels Good…”: Research on School Selection Process Motives Among Parents of Young Children

    NARCIS (Netherlands)

    ter Avest, I.; Bertram-Troost, G.D.; Miedema, S.

    2015-01-01

    From (inter)national research we know about parents’ priorities in the school selection process. In this research the authors focus on parents’ motivations underpinning these priorities. The question is: “What motivates parents to send their child to a Christian primary school?” In the Dutch plural

  6. Off-diagonal helicity density matrix elements for vector mesons produced in polarized e+e- processes

    International Nuclear Information System (INIS)

    Anselmino, M.; Murgia, F.; Quintairos, P.

    1999-04-01

    Final state q q-bar interactions give origin to non zero values of the off-diagonal element ρ 1,-1 of the helicity density matrix of vector mesons produced in e + e - annihilations, as confirmed by recent OPAL data on φ, D * and K * 's. New predictions are given for ρ 1,-1 of several mesons produced at large x E and small p T - i.e. collinear with the parent jet - in the annihilation of polarized 3 + and 3 - , the results depend strongly on the elementary dynamics and allow further non trivial tests of the standard model. (author)

  7. Are Parents Doing Better When They Are Together? A Study on the Association between Parental Sensitivity and Family-Level Processes

    Science.gov (United States)

    Udry-Jørgensen, Laura; Tissot, Hervé; Frascarolo, France; Despland, Jean-Nicolas; Favez, Nicolas

    2016-01-01

    The aim of this study was to evaluate the influence of one parent's presence on the quality of the interaction between the other parent and their three-month-old infant. Family interactions were observed in a sample of 69 two-parent families. Parental sensitivity was assessed during two sessions, first in a "dyadic" context (D) and then…

  8. Initial H2O content and conditions of parent magma origin for Gorely volcano (Southern Kamchatka) estimated by trace element thermobarometry

    Science.gov (United States)

    Nazarova, D. P.; Portnyagin, M. V.; Krasheninnikov, S. P.; Mironov, N. L.; Sobolev, A. V.

    2017-01-01

    The formation conditions of the parental magmas of Gorely volcano, which is located behind a volcanic front in Southern Kamchatka, have been evaluated using the modern methods of micro-element thermobarometry. These magmas contained 1.7 ± 0.8 (2σ) wt % of H2O, the majority (82%) of which has been lost from inclusions. They crystallized at 1121 ± 17°C and an oxygen fugacity of ΔQFM 1.2 ± 0.2, and could have been produced by about 11% melting of an enriched MORB source (E-DMM) at a temperature of about 1270°C, and a pressure of about 1.5 GPa. A distinctive feature of Gorely volcano, compared with frontal volcanoes of Kamchatka, is the unusually high temperature (925 ± 20°C) of formation of the subduction component corresponding to the region of existence of water-bearing melts.

  9. Cell-element simulations to optimize the performance of osmotic processes in porous membranes

    KAUST Repository

    Calo, Victor M.; Iliev, Oleg; Nunes, Suzana Pereira; Printsypar, Galina; Shi, Meixia

    2018-01-01

    concerns the design of a cell element for the forward osmosis experiments. Using the developed software tool we qualitatively and quantitatively investigate the performance of a cell element that we designed for laboratory experiments of forward osmosis

  10. Process for changing fuel elements of a water-cooled nuclear reactor

    International Nuclear Information System (INIS)

    Fleischmann, R.; Rau, P.

    1986-01-01

    In order to change fuel elements, a water-filled duct can be installed between the rector pressure vessel and a space for accommodating the fuel elements. The fuel elements are transported there under water by a fuelling machine. The duct is installed as watertight connection closed on all sides between the reactor pressure vessel and a fuel element transport container brought close to it. The fuelling machine works in this duct. (orig./HP) [de

  11. RARE EARTH ELEMENTS: A REVIEW OF PRODUCTION, PROCESSING, RECYCLING, AND ASSOCIATED ENVIRONMENTAL ISSUES

    Science.gov (United States)

    Rare earth elements (REEs) are a group of 15 chemical elements in the periodic table, specifically the lanthanides. Two other elements, scandium and yttrium, have a similar physiochemistry to the lanthanides, are commonly found in the same mineral assemblages, and are often refe...

  12. Online elemental analysis of process gases with ICP-OES: A case study on waste wood combustion

    International Nuclear Information System (INIS)

    Wellinger, Marco; Wochele, Joerg; Biollaz, Serge M.A.; Ludwig, Christian

    2012-01-01

    Highlights: ► Simultaneous measurements of 23 elements in process gases of a waste wood combustor. ► Mobile ICP spectrometer allows measurements of high quality at industrial plants. ► Continuous online measurements with high temporal resolution. ► Linear correlations among element concentrations in the raw flue gas were detected. ► Novel sampling and calibration methods for ICP-OES analysis of process gases. - Abstract: A mobile sampling and measurement system for the analysis of gaseous and liquid samples in the field was developed. An inductively coupled plasma optical emission spectrometer (ICP-OES), which is built into a van, was used as detector. The analytical system was calibrated with liquid and/or gaseous standards. It was shown that identical mass flows of either gaseous or liquid standards resulted in identical ICP-OES signal intensities. In a field measurement campaign trace and minor elements in the raw flue gas of a waste wood combustor were monitored. Sampling was performed with a highly transport efficient liquid quench system, which allowed to observe temporal variations in the elemental process gas composition. After a change in feedstock an immediate change of the element concentrations in the flue gas was detected. A comparison of the average element concentrations during the combustion of the two feedstocks showed a high reproducibility for matrix elements that are expected to be present in similar concentrations. On the other hand elements that showed strong differences in their concentration in the feedstock were also represented by a higher concentration in the flue gas. Following the temporal variations of different elements revealed strong correlations between a number of elements, such as chlorine with sodium, potassium and zinc, as well as arsenic with lead, and calcium with strontium.

  13. Simulating subduction zone earthquakes using discrete element method: a window into elusive source processes

    Science.gov (United States)

    Blank, D. G.; Morgan, J.

    2017-12-01

    Large earthquakes that occur on convergent plate margin interfaces have the potential to cause widespread damage and loss of life. Recent observations reveal that a wide range of different slip behaviors take place along these megathrust faults, which demonstrate both their complexity, and our limited understanding of fault processes and their controls. Numerical modeling provides us with a useful tool that we can use to simulate earthquakes and related slip events, and to make direct observations and correlations among properties and parameters that might control them. Further analysis of these phenomena can lead to a more complete understanding of the underlying mechanisms that accompany the nucleation of large earthquakes, and what might trigger them. In this study, we use the discrete element method (DEM) to create numerical analogs to subduction megathrusts with heterogeneous fault friction. Displacement boundary conditions are applied in order to simulate tectonic loading, which in turn, induces slip along the fault. A wide range of slip behaviors are observed, ranging from creep to stick slip. We are able to characterize slip events by duration, stress drop, rupture area, and slip magnitude, and to correlate the relationships among these quantities. These characterizations allow us to develop a catalog of rupture events both spatially and temporally, for comparison with slip processes on natural faults.

  14. Innovative Application of Mechanical Activation for Rare Earth Elements Recovering: Process Optimization and Mechanism Exploration

    Science.gov (United States)

    Tan, Quanyin; Deng, Chao; Li, Jinhui

    2016-01-01

    With the rapidly expanding use of fluorescent lamps (FLs) and increasing interest in conservation and sustainable utilization of critical metals such as rare earth elements (REEs), the recovering of REEs from phosphors in waste FLs is becoming a critical environmental and economic issue. To effectively recycle REEs with metallurgical methods, mechanical activation by ball milling was introduced to pretreat the waste phosphors. This current study put the emphasis on the mechanical activation and leaching processes for REEs, and explored the feasibility of the method from both theoretical and practical standpoints. Results showed physicochemical changes of structural destruction and particle size reduction after mechanical activation, leading to the easy dissolution of REEs in the activated samples. Under optimal conditions, dissolution yields of 89.4%, 93.1% and 94.6% for Tb, Eu and Y, respectively, were achieved from activated waste phosphors using hydrochloric acid as the dissolution agent. The shrinking core model proved to be the most applicable for the leaching procedure, with an apparent activation energy of 10.96 ± 2.79 kJ/mol. This novel process indicates that mechanical activation is an efficient method for recovering REEs from waste phosphors, and it has promising potential for REE recovery with low cost and high efficiency.

  15. Remedial Investigation/Feasibility Study (RI/FS) process, elements and techniques guidance

    Energy Technology Data Exchange (ETDEWEB)

    1993-12-01

    This manual provides detailed guidance on Remedial Investigation/Feasibility Studies (RI/FSs) conducted pursuant to the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) at Department of Energy (DOE) facilities. The purpose of the RI/FS, to assess the risk posed by a hazardous waste site and to determine the best way to reduce that risk, and its structure (site characterization, risk assessment, screening and detailed analysis of alternatives, etc.) is defined in the National Oil and Hazardous Substances Pollution Contingency Plan (NCP) and further explained in the Environmental Protection Agency`s (EPA`s) Guidance for Conducting Remedial Investigations and Feasibility Studies Under CERCLA (Interim Final) 540/G-89/004, OSWER Directive 9355.3-01, October 1988. Though issued in 1988, the EPA guidance remains an excellent source of information on the conduct and structure of an RI/FS. This document makes use of supplemental RI/FS-related guidance that EPA has developed since its initial document was issued in 1988, incorporates practical lessons learned in more than 12 years of experience in CERCLA hazardous site remediation, and drawing on those lessons, introduces the Streamlined Approach For Environmental Restoration (SAFER), developed by DOE as a way to proceed quickly and efficiently through the RI/FS process at DOE facilities. Thus as its title implies, this guidance is intended to describe in detail the process and component elements of an RI/FS, as well as techniques to manage the RI/FS effectively.

  16. Method of separating plutonium from the process streams of a reprocessing plant for HTR fuel elements

    Energy Technology Data Exchange (ETDEWEB)

    Herz, D.; Kankura, R.; Wenzel, U.

    1975-07-15

    The process streams of a reprocessing plant for Th-U fuel elements can be purified of Pu, using a chromatographic method. The process is based on the principles of extraction chromatography with the application of the method of breakthrough chromatography. The inert carrier consists of polytrifluoromonochloroethylene, TOA forming the steady-state phase and 2 M HNO/sub 3/ the mobile phase. After adjustment of the feed solution to the extraction conditions, Pu is extracted in the separating column to the steady-state phase. The height of the separating stages is expressed by the equation HTS (cm) = 0.2 + 0.65 u/sub 0/ (cm min/sup -1/). Due to the delayed Pu/Th exchange in TOA, it depends heavily on the linear flow velocity. Details are given of the design of a separating unit for a flowrate of 2 kg of heavy metal per day (the flowrate of the Jupiter plant). (12 fig, 4 tables)

  17. Factors Influencing the Decision-Making Process and Long-Term Interpersonal Outcomes for Parents Who Undergo Preimplantation Genetic Diagnosis for Fanconi Anemia: a Qualitative Investigation.

    Science.gov (United States)

    Haude, K; McCarthy Veach, P; LeRoy, B; Zierhut, H

    2017-06-01

    Fanconi anemia (FA) is characterized by congenital malformations, progressive bone marrow failure, and predisposition to malignancy. Hematopoietic stem cell transplantation is used to treat FA, and best results are attained with sibling donors who are human leukocyte antigen (HLA) identical matches. Preimplantation genetic diagnosis (PGD) offers parents of an affected child the opportunity to have an unaffected child who is an HLA match. While some research has investigated parents' experiences during the PGD process, no published studies specifically address factors influencing their decision-making process and long-term interpersonal outcomes. The aims of this study are to: (1) examine parents' expectations and the influence of media, bioethics, and religion on their decision to undergo PGD; (2) examine parents' social support and emotional experiences during their PGD process; and (3) characterize long-term effects of PGD on relationship dynamics (partner, family, friends), others' attitudes, and parental regret. Nine parents participated in semi-structured interviews. Thematic analysis revealed their decision to use PGD was variously influenced by media, bioethics, and religion, in particular, affecting parents' initial confidence levels. Moreover, the PGD process was emotionally complex, with parents desiring varying amounts and types of support from different sources at different times. Parents reported others' attitudes towards them were similar or no different than before PGD. Parental regret regarding PGD was negligible. Results of this study will promote optimization of long-term care for FA families.

  18. Formation of Globular Clusters with Internal Abundance Spreads in r -Process Elements: Strong Evidence for Prolonged Star Formation

    Energy Technology Data Exchange (ETDEWEB)

    Bekki, Kenji [ICRAR, M468, University of Western Australia, 35 Stirling Highway, Crawley, Western Australia, 6009 (Australia); Tsujimoto, Takuji [National Astronomical Observatory of Japan, Mitaka-shi, Tokyo 181-8588 (Japan)

    2017-07-20

    Several globular clusters (GCs) in the Galaxy are observed to show internal abundance spreads in r -process elements (e.g., Eu). We propose a new scenario that explains the origin of these GCs (e.g., M5 and M15). In this scenario, stars with no/little abundance variations first form from a massive molecular cloud (MC). After all of the remaining gas of the MC is expelled by numerous supernovae, gas ejected from asymptotic giant branch stars can be accumulated in the central region of the GC to form a high-density intracluster medium (ICM). Merging of neutron stars then occurs to eject r -process elements, which can be efficiently trapped in and subsequently mixed with the ICM. New stars formed from the ICM can have r -process abundances that are quite different from those of earlier generations of stars within the GC. This scenario can explain both (i) why r -process elements can be trapped within GCs and (ii) why GCs with internal abundance spreads in r -process elements do not show [Fe/H] spreads. Our model shows (i) that a large fraction of Eu-rich stars can be seen in Na-enhanced stellar populations of GCs, as observed in M15, and (ii) why most of the Galactic GCs do not exhibit such internal abundance spreads. Our model demonstrates that the observed internal spreads of r -process elements in GCs provide strong evidence for prolonged star formation (∼10{sup 8} yr).

  19. From elements to perception: local and global processing in visual neurons.

    Science.gov (United States)

    Spillmann, L

    1999-01-01

    Gestalt psychologists in the early part of the century challenged psychophysical notions that perceptual phenomena can be understood from a punctate (atomistic) analysis of the elements present in the stimulus. Their ideas slowed later attempts to explain vision in terms of single-cell recordings from individual neurons. A rapprochement between Gestalt phenomenology and neurophysiology seemed unlikely when the first ECVP was held in Marburg, Germany, in 1978. Since that time, response properties of neurons have been discovered that invite an interpretation of visual phenomena (including illusions) in terms of neuronal processing by long-range interactions, as first proposed by Mach and Hering in the last century. This article traces a personal journey into the early days of neurophysiological vision research to illustrate the progress that has taken place from the first attempts to correlate single-cell responses with visual perceptions. Whereas initially the receptive-field properties of individual classes of cells--e.g., contrast, wavelength, orientation, motion, disparity, and spatial-frequency detectors--were used to account for relatively simple visual phenomena, nowadays complex perceptions are interpreted in terms of long-range interactions, involving many neurons. This change in paradigm from local to global processing was made possible by recent findings, in the cortex, on horizontal interactions and backward propagation (feedback loops) in addition to classical feedforward processing. These mechanisms are exemplified by studies of the tilt effect and tilt aftereffect, direction-specific motion adaptation, illusory contours, filling-in and fading, figure--ground segregation by orientation and motion contrast, and pop-out in dynamic visual-noise patterns. Major questions for future research and a discussion of their epistemological implications conclude the article.

  20. Solvent Refined Coal (SRC) process: trace elements. Research and development report No. 53, interim report No. 30. Volume III. Pilot plant development work. Part 6. The fate of trace elements in the SRC process

    International Nuclear Information System (INIS)

    Khalil, S.R.

    1980-02-01

    Instrumental neutron activation analysis was used to study the distribution and fate of up to 36 elements in the Solvent Refined Coal Process Pilot Plant located at Fort Lewis, Washington. The elements Ti, V, Mg, Ca, Al, Cl, Mn, As, Br, Na, K, Sm, La, Ga, Cu, Sb, Se, Hg, Ni, Co, Cr, Fe, Rb, Cs, Sc, Tb, Eu, Ce, Sr, Ba, Th, U, Hf, Ta, Zr and Zn were measured in feed coal, insoluble residues, process solvent, process and effluent waters, by-product sulfur, SRC-I solid product, liquid-liquid separator oils and SRC-II liquid products. The material balance was calculated for each element from the concentration data and yields of each process fraction for both the SRC-I and SRC-II processes. Except for Ti, Cl and Br in the SRC-I mode and Hg in the SRC-II mode, each element was substantially lower in the SRC products than in the original feed coal. Residues from the process contained more than 80% of the trace element content found in the coal, except for Hg. More than 98.5% of the total contents of K and Fe in coal were retained in the insoluble residues. Elements such as Hg, Se, As and Sb can form volatile compounds (such as Hg 0 , H 2 Se, AsH 3 and SbH 3 ) stable under the process conditions. The high enhancement factors of Se (957), As (202) and Sb (27.4) in the aqueous phase of the separator water compared to that of the oil are evidence for the formation of volatile species which are more soluble in water than in the oil phase

  1. Intergenerational associations linking identity styles and processes in adolescents and their parents

    NARCIS (Netherlands)

    Luyckx, K.; Schwartz, S.J.; Rassart, J.; Klimstra, Theo

    2016-01-01

    Identity formation is a lifelong task, yet much research focuses on adolescence and emerging adulthood. Little is known about whether parents' identities are related to their adolescent children's identities. The present studies were designed to examine intergenerational associations. Specifically,

  2. Individualized Education Programs for Students with Autism: Including Parents in the Process.

    Science.gov (United States)

    Simpson, Richard L.

    1995-01-01

    The involvement of parents in developing individualized education programs (IEPs) for their children with autism is discussed. Essential components of IEP documents are outlined, and strategies that professionals can use to promote significant family involvement are considered. (Author/SW)

  3. Interatomic interaction of additive elements and their influence on the processes in the double metal solutions

    Directory of Open Access Journals (Sweden)

    Марина Анатоліівна Рябікіна

    2016-07-01

    Full Text Available Modern industry uses a lot of elements as additives to improve the service characteristics of metal products that are to be used for various purposes. These elements can be divided into two groups: the first group includes the elements interacting with iron and improving its characteristics (alloying elements, and the second group includes the elements, that modify the characteristics of the structure and properties in an undesirable direction. These are trace elements: S, P, O, As, and others in steel. The negative impact of these elements shows itself as banding, the formation of non-metallic inclusions, flakes, grain boundary segregations et al. The influence of the elements of the both groups on the properties of steel depends on the nature and level of interatomic interaction in the alloy. Computational and analytical study of the major impurity elements in steel impact on the interatomic bond strength and the probability of forming complexes, clusters, and chemical compounds with the basic alloying elements in the steel has been carried out in the work. The theoretical parameter which defines the strength of the ion-covalent bond of two atoms: non-metallic – metallic is the electronegativity of elements. The electronegativity difference of the metal and non-metallic elements increasing, the ionic bonding and thermodynamic stability of these compounds  increase. On the other hand, concentration of valent electrons is a universal characteristic of an atomic element which determines many of its properties, and especially the energy of interatomic interaction. Energy calculations of pairwise interatomic impurity elements: H, C, N, S, P, As interaction with Fe and major alloying elements in steel: Mn, Cr, Si, V, Al, Ti, W, Cu, Mo, Nb were made. It has been stated that all the impurity elements except phosphorus, hydrogen and arsenic have sufficient high adhesion with the majority of the metal elements in the modern steels. Phosphorus does

  4. Understanding rhizosphere processes to enhance phytoextraction of germanium and rare earth elements

    Science.gov (United States)

    Wiche, Oliver

    2017-04-01

    Germanium (Ge) and rare earth elements (REEs) are economically valuable raw materials that are not actually rare in terms of concentrations in soils but they are hardly available for plant uptake due to interactions with organic matter (SOM), secondary soil constituents such as Fe/Mn oxides and P bearing soil fractions. Processes in the rhizosphere might influence availability of Ge and REEs in the soil-plant system, since lowering of the pH and presence of carboxylates and siderophores (small molecules that strongly chelate Fe and other elements) strongly influences the chemical speciation of Ge and REEs in soil and consequently this comprehensive knowledge helps us to improve phytomining. In a series of field and greenhouse experiments 16 plant species from the functional groups of grasses, herbs and legumes were tested with regard to their accumulation efficiency of Ge and REEs in shoots. Subsequently, we conducted mixed culture experiments in which inefficient species (e.g. cereals like Avena sativa, Hordeum vulgare, Panicum miliaceum) were cultivated in mixed cultures with efficient species (Lupinus albus, Lupinus angustifolius). Based on the plant concentrations a principal component analysis (PCA) was performed to identify significant factors that explain the accumulation behavior of different plant species with regard to Ge, REEs, Si, Fe and Mn. In this analysis Mn was used to identify plant species with efficient mechanisms to access sparingly available P-resources in soils. Particularly in nonmycorrhizal species concentrations of Mn in leaves often indicate a carboxylate based P-mobilising strategy. Herbaceous plant species accumulated significantly higher amounts of REEs while grasses accumulated significantly higher amounts of Ge. Concentrations of Ge in shoots of grasses correlated significantly positive with Si, but negatively with concentrations of Mn. Indeed, the results of the PCA clearly show that plants with high Mn concentrations tend to have

  5. Parenting while Being Homeless

    Science.gov (United States)

    Swick, Kevin J.; Williams, Reginald; Fields, Evelyn

    2014-01-01

    This article explores the dynamics of parenting while being in a homeless context. The mosaic of stressors involved in this homeless parenting process are explicated and discussed. In addition, resources and strategies that may support parenting are presented and discussed.

  6. Rare earth elements leaching from Tin slag using Acid Chloride after Alkaline fusion process

    International Nuclear Information System (INIS)

    Kurnia Trinopiawan; Budi Yuli Ani; June Mellawati; Mohammad Zaki Mubarok

    2016-01-01

    Tin slag, a waste product from tin smelting process, has a potency to be utilized further by extracting the valuable metals inside, such as rare earth elements(REE). The objective of this study is to determine the optimum leaching condition of REE from tin slag after alkali fusion. Silica structure in slag is causing the direct leaching uneffectively. Therefore, pre-treatment step using alkali fusion is required to break the structure of silica and to increase the porosity of slag. Fusion is conducted in 2 hours at 700°C, with ratio of natrium hydroxide (NaOH) : slag = 2 : 1. Later, frit which is leached by water then leached by chloride acid to dissolve REE. As much as 87,5% of REE is dissolved at 2 M on chloride acid (HCl) concentration, in 40°C temperature, -325 mesh particle size, 15 g/100 ml of S/L, 150 rpm of agitation speed, and 5 minutes of leaching time. (author)

  7. Fabrication of Elemental Copper by Intense Pulsed Light Processing of a Copper Nitrate Hydroxide Ink.

    Science.gov (United States)

    Draper, Gabriel L; Dharmadasa, Ruvini; Staats, Meghan E; Lavery, Brandon W; Druffel, Thad

    2015-08-05

    Printed electronics and renewable energy technologies have shown a growing demand for scalable copper and copper precursor inks. An alternative copper precursor ink of copper nitrate hydroxide, Cu2(OH)3NO3, was aqueously synthesized under ambient conditions with copper nitrate and potassium hydroxide reagents. Films were deposited by screen-printing and subsequently processed with intense pulsed light. The Cu2(OH)3NO3 quickly transformed in less than 100 s using 40 (2 ms, 12.8 J cm(-2)) pulses into CuO. At higher energy densities, the sintering improved the bulk film quality. The direct formation of Cu from the Cu2(OH)3NO3 requires a reducing agent; therefore, fructose and glucose were added to the inks. Rather than oxidizing, the thermal decomposition of the sugars led to a reducing environment and direct conversion of the films into elemental copper. The chemical and physical transformations were studied with XRD, SEM, FTIR and UV-vis.

  8. A discrete element based simulation framework to investigate particulate spray deposition processes

    KAUST Repository

    Mukherjee, Debanjan

    2015-06-01

    © 2015 Elsevier Inc. This work presents a computer simulation framework based on discrete element method to analyze manufacturing processes that comprise a loosely flowing stream of particles in a carrier fluid being deposited on a target surface. The individual particulate dynamics under the combined action of particle collisions, fluid-particle interactions, particle-surface contact and adhesive interactions is simulated, and aggregated to obtain global system behavior. A model for deposition which incorporates the effect of surface energy, impact velocity and particle size, is developed. The fluid-particle interaction is modeled using appropriate spray nozzle gas velocity distributions and a one-way coupling between the phases. It is found that the particle response times and the release velocity distribution of particles have a combined effect on inter-particle collisions during the flow along the spray. It is also found that resolution of the particulate collisions close to the target surface plays an important role in characterizing the trends in the deposit pattern. Analysis of the deposit pattern using metrics defined from the particle distribution on the target surface is provided to characterize the deposition efficiency, deposit size, and scatter due to collisions.

  9. Finite element simulation of dynamic wetting flows as an interface formation process

    KAUST Repository

    Sprittles, J.E.

    2013-01-01

    A mathematically challenging model of dynamic wetting as a process of interface formation has been, for the first time, fully incorporated into a numerical code based on the finite element method and applied, as a test case, to the problem of capillary rise. The motivation for this work comes from the fact that, as discovered experimentally more than a decade ago, the key variable in dynamic wetting flows - the dynamic contact angle - depends not just on the velocity of the three-phase contact line but on the entire flow field/geometry. Hence, to describe this effect, it becomes necessary to use the mathematical model that has this dependence as its integral part. A new physical effect, termed the \\'hydrodynamic resist to dynamic wetting\\', is discovered where the influence of the capillary\\'s radius on the dynamic contact angle, and hence on the global flow, is computed. The capabilities of the numerical framework are then demonstrated by comparing the results to experiments on the unsteady capillary rise, where excellent agreement is obtained. Practical recommendations on the spatial resolution required by the numerical scheme for a given set of non-dimensional similarity parameters are provided, and a comparison to asymptotic results available in limiting cases confirms that the code is converging to the correct solution. The appendix gives a user-friendly step-by-step guide specifying the entire implementation and allowing the reader to easily reproduce all presented results, including the benchmark calculations. © 2012 Elsevier Inc.

  10. Prediction of springback in V-die air bending process by using finite element method

    Directory of Open Access Journals (Sweden)

    Trzepiecinski Tomasz

    2017-01-01

    Full Text Available Springback phenomenon affects the dimensional and geometrical accuracy of the bent parts. The prediction of springback is a key problem in sheet metal forming. The aim of this paper is the numerical analysis of the possibility to predict the springback of anisotropic steel sheets. The experiments are conducted on 40 x 100 mm steel sheets. The mechanical properties of the sheet metals have been determined through uniaxial tensile tests of samples cut along three directions with respect to the rolling direction. The numerical model of air V-bending is built in finite element method (FEM based ABAQUS/Standard 2016.HF2 (Dassault Systemes Simulia Corp., USA program. The FEM results were verified by experimental investigations. The simulation model has taken into consideration material anisotropy and strain hardening phenomenon. The results of FEM simulations confirmed the ability of numerical prediction of springback amount. It was also found that the directional microstructure of the sheet metal resulted from rolling process affects the elastic-plastic deformation of the sheets through the sample width.

  11. Regularities of the chlorination process of phosphates and tungstates of some actinide and fission elements in chloride melts

    International Nuclear Information System (INIS)

    Kryukova, A.I.; Chernikov, A.A.; Skiba, O.V.; Kazantsev, G.N.

    1988-01-01

    Results of kinetic studies of chlorination process of crystal phosphates and tungstates of uranium, cerium, zirconium, plutonium by vapours of carbon tetrachloride in the melts of alkali element chlorides at of 973-1073 K have been analyzed. Mathematical models for the process description are suggested. Analysis of adequate models of regression type permitted to solve the problem of statistical evaluation of affecting factors and to predict within factor space studied the conditions for the optimal process course

  12. Parental divorce during early adolescence in Caucasian families: the role of family process variables in predicting the long-term consequences for early adult psychosocial adjustment.

    Science.gov (United States)

    Summers, P; Forehand, R; Armistead, L; Tannenbaum, L

    1998-04-01

    The relationship between parental divorce occurring during adolescence and young adult psychosocial adjustment was examined, as was the role of family process variables in clarifying this relationship. Participants were young Caucasian adults from divorced (n = 119) and married (n = 123) families. Assessments were conducted during adolescence and 6 years later during early adulthood. Young adults from married families reported more secure romantic attachments than those from divorced families; however, differences were not evident in other domains of psychosocial adjustment after demographic variables were controlled. Three family process variables (parent-adolescent relationship, interparental conflict, and maternal depressive symptoms) were examined as potential mediators and moderators of the association between parental divorce and young adult adjustment. No evidence supporting mediation or moderation was found; however, the parent-adolescent and parent-young adult relationships, particularly when the identified parent was the father, emerged as significant predictors of young adult psychosocial adjustment.

  13. Perceived Parental Control Processes, Parent-Child Relational Qualities, and Psychological Well-Being in Chinese Adolescents with and without Economic Disadvantage

    Science.gov (United States)

    Shek, Daniel T. L.

    2005-01-01

    The author assessed the relationships between poverty and perceived parenting style, parent-child relationships, and adolescent psychological well-being in Chinese secondary school students (N = 3,017). Participants completed questionnaires designed to assess (a) the degree to which their parents used monitoring, discipline, and other techniques…

  14. Process recognition in multi-element soil and stream-sediment geochemical data

    Science.gov (United States)

    Grunsky, E.C.; Drew, L.J.; Sutphin, D.M.

    2009-01-01

    Stream-sediment and soil geochemical data from the Upper and Lower Coastal Plains of South Carolina (USA) were studied to determine relationships between soils and stream sediments. From multi-element associations, characteristic compositions were determined for both media. Primary associations of elements reflect mineralogy, including heavy minerals, carbonates and clays, and the effects of groundwater. The effects of groundwater on element concentrations are more evident in soils than stream sediments. A "winnowing index" was created using ratios of Th to Al that revealed differing erosional and depositional environments. Both soils and stream sediments from the Upper and Lower Coastal Plains show derivation from similar materials and subsequent similar multi-element relationships, but have some distinct differences. In the Lower Coastal Plain, soils have high values of elements concentrated in heavy minerals (Ce, Y, Th) that grade into high values of elements concentrated into finer-grain-size, lower-density materials, primarily comprised of carbonates and feldspar minerals (Mg, Ca, Na, K, Al). These gradational trends in mineralogy and geochemistry are inferred to reflect reworking of materials during marine transgressions and regressions. Upper Coastal Plain stream-sediment geochemistry shows a higher winnowing index relative to soil geochemistry. A comparison of the 4 media (Upper Coastal Plain soils and stream sediments and Lower Coastal Plain soils and stream sediments) shows that Upper Coastal Plain stream sediments have a higher winnowing index and a higher concentration of elements contained within heavy minerals, whereas Lower Coastal Plain stream sediments show a strong correlation between elements typically contained within clays. It is not possible to calculate a functional relationship between stream sediment-soil compositions for all elements due to the complex history of weathering, deposition, reworking and re-deposition. However, depending on

  15. Adoptive parenting.

    Science.gov (United States)

    Grotevant, Harold D; Lo, Albert Yh

    2017-06-01

    Challenges in adoptive parenting continue to emerge as adoption policies and practices evolve. We review three areas of research in adoptive parenting that reflect contemporary shifts in adoption. First, we highlight recent findings concerning openness in adoption contact arrangements, or contact between a child's families of birth and rearing. Second, we examine research regarding racial and cultural socialization in transracial and international adoptions. Finally, we review investigations of parenting experiences of lesbian and gay adoptive parents. Overall, parenting processes (e.g., supportive vs. problematic family interaction) are better predictors of child adjustment than are group differences (e.g., open vs. closed adoptions; adoption by heterosexual vs. same-sex parents). The distinctive needs of adopted children call for preparation of adoption-competent mental health, casework, education, and health care professionals. Copyright © 2017 Elsevier Ltd. All rights reserved.

  16. Elemental properties of copper slag and measured airborne exposures at a copper slag processing facility.

    Science.gov (United States)

    Mugford, Christopher; Gibbs, Jenna L; Boylstein, Randy

    2017-08-01

    In 1974, the National Institute for Occupational Safety and Health recommended a ban on the use of abrasives containing >1% silica, giving rise to abrasive substitutes like copper slag. We present results from a National Institute for Occupational Safety and Health industrial hygiene survey at a copper slag processing facility that consisted of the collection of bulk samples for metals and silica; and full-shift area and personal air samples for dust, metals, and respirable silica. Carcinogens, suspect carcinogens, and other toxic elements were detected in all bulk samples, and area and personal air samples. Area air samples identified several areas with elevated levels of inhalable and respirable dust, and respirable silica: quality control check area (236 mg/m 3 inhalable; 10.3 mg/m 3 respirable; 0.430 mg/m 3 silica), inside the screen house (109 mg/m 3 inhalable; 13.8 mg/m 3 respirable; 0.686 mg/m 3 silica), under the conveyor belt leading to the screen house (19.8 mg/m 3 inhalable), and inside a conveyor access shack (11.4 mg/m 3 inhalable; 1.74 mg/m 3 respirable; 0.067 mg/m 3 silica). Overall, personal dust samples were lower than area dust samples and did not exceed published occupational exposure limits. Silica samples collected from a plant hand and a laborer exceeded the American Conference of Governmental Industrial Hygienist Threshold Limit Value of 0.025 µg/m 3 . All workers involved in copper slag processing (n = 5) approached or exceeded the Occupational Safety and Health Administration permissible exposure limit of 10 µg/m 3 for arsenic (range: 9.12-18.0 µg/m 3 ). Personal total dust levels were moderately correlated with personal arsenic levels (R s = 0.70) and personal respirable dust levels were strongly correlated with respirable silica levels (R s = 0.89). We identified multiple areas with elevated levels of dust, respirable silica, and metals that may have implications for personal exposure at other facilities if preventive

  17. A qualitative process evaluation of a randomised controlled trial of a parenting intervention in community (school) settings for children at risk of attention deficit hyperactivity disorder (ADHD).

    Science.gov (United States)

    Taylor, John A; Valentine, Althea Z; Sellman, Edward; Bransby-Adams, Kate; Daley, David; Sayal, Kapil

    2015-11-17

    Interventions for parents of children experiencing emotional and/or behavioural difficulties can help to improve their children's health, educational and social outcomes. However, the desirability and acceptability of screening and offering such interventions for attention-deficit hyperactivity disorder (ADHD)-type problems are currently unclear. This article is a qualitative process evaluation of a pragmatic cluster randomised controlled trial (Trial registration: ISRCTN87634685; reported elsewhere) to assess the feasibility and acceptability of a school-based parenting intervention programme for parents and teachers of children with high levels of ADHD symptoms. Parents (n = 22) and teaching staff (n = 29) took part in semi-structured group or individual interviews, either by telephone or face-to-face, following the main trial. Interviews were digitally-recorded, transcribed verbatim and subjected to thematic analysis. The parenting intervention was acceptable to parents and teachers, and they were enthusiastic about the need for parenting groups in the school environment and stressed the importance of parent-school collaboration. Parents generally stated a preference for universal recruitment approaches to such programmes whilst teachers described the need to target specific parents. Most parents who took part in the parenting intervention described it favourably and many saw benefits, at least in the short-term. Parents differed in their preferred group size, with some desiring one-to-one sessions and others favouring a larger group. Non-attending parents reported barriers to attendance such as fear of attending in a group, previous use of the programme, work and other commitments. Suggestions to improve the programme included: clearer communication; offering booster sessions; and greater collaboration with teachers. It is feasible to deliver parenting intervention programmes within or near schools. The intervention was acceptable to the majority of

  18. Enrolling adolescents in asthma research: adolescent, parent, and physician influence in the decision-making process.

    Science.gov (United States)

    Brody, Janet L; Annett, Robert D; Scherer, David G; Turner, Charles; Dalen, Jeanne

    2009-06-01

    The factors influencing family decisions to participate in adolescent asthma research are not well understood. Legal and ethical imperatives require adolescent research participation to be voluntary. While parents and adolescents often agree about research decisions, disagreements may also occur with relative frequency. Physician recommendations are also known to influence research participation decisions. Little attention has been given to how these dynamics may affect adolescents' involvement in decisions to participate in research. To examine the influence of family and physician-investigator relationships and recommendations on adolescent asthma clinical research participation decisions. A statewide community sample of 111 adolescents 11 to 17 years of age, with a diagnosis of asthma, and their parents participated in this study. Adolescents received a medical evaluation from an asthma specialist and then the family was offered participation in a hypothetical asthma clinical trial. By random assignment, the research study was presented by either the same or an unknown asthma specialist, and half the families in each group also received affirmative recommendations from the asthma specialist to participate in the hypothetical asthma clinical trial. Parents and adolescents made initial private decisions about participating in the trial. Then, following a family discussion of the clinical trial, a final research participation decision was made. Thirty-three percent of parents and adolescents initially disagreed about the research participation decision. When disagreements occurred, final decisions followed the parents' initial views except when the physician-investigator was known and a recommendation was made. Families with initial disagreement about participating were less likely to enroll when the investigator was unknown or when no recommendation was made. Adolescents who initially disagreed with parents' views were less likely to concur with the final research

  19. Organisational systems and services for children of parents with mental illness and their families: processes of change and sustainability.

    Science.gov (United States)

    Owen, Susanne

    2010-09-01

    Adult mental illness in the community including depression and anxiety has achieved greater public awareness and visibility in recent years and this has also resulted in increased recognition about the widespread impact on dependent children. During the past decade in Australia, policies and specific programs for infants, children and youth in terms of prevention, early intervention and promotion in relation to children of parents with a mental illness ('copmi') have been devised. However, these have generally been disconnected projects, essentially supported only by non-recurrent funding. In more recent years, systematic and interconnected responses involving a wider range of government, non-government and consumer and carer organisations to build sustainability have become the focus. However, little research about change processes affecting the organisational systems serving children of parents with mental illness and their families has been undertaken. This aim of the current study is to describe the enablers and barriers that contribute to change in systems and government and non-government organisations in relation to children of parents with a mental illness in Australia over the past decade, within the context of sustainability. The study involved interviews, focus groups and website and literature searches regarding systems change across Australian states and territories and nationally in relation to the enablers, barriers and future directions. Strategic and intentional processes within organisations, more evolutionary ongoing cross-agency processes and links to sustained changes are key systems change findings. Relevance for change in other health services is highlighted.

  20. Detection process of defects in a tube close to an adjacent element, especially in a heat exchanger

    International Nuclear Information System (INIS)

    Holt, A.E.; Wehrmeister, A.E.; Whaley, H.L.

    1978-01-01

    On-site process for obtaining, by Foucault currents, the indication of a defect in a tube close to an adjacent element masking the indication of the defect. It is characterized by the course of a reference tube with an eddy current sensor near a similar adjacent element in order to obtain an indication of reference eddy currents of the adjacent element first mentioned, the completion of a joint crossover of the above first mentioned tube so as to obtain a composite indication of eddy currents of the defect and of the adjacent element, and the generation of the indication by eddy currents of the defect by comparing the composite indication with the reference indication [fr

  1. DEVELOPMENT OF LOW-COST MANUFACTURING PROCESSES FOR PLANAR, MULTILAYER SOLID OXIDE FUEL CELL ELEMENTS

    Energy Technology Data Exchange (ETDEWEB)

    Scott Swartz; Matthew Seabaugh; William Dawson; Harlan Anderson; Tim Armstrong; Michael Cobb; Kirby Meacham; James Stephan; Russell Bennett; Bob Remick; Chuck Sishtla; Scott Barnett; John Lannutti

    2004-06-12

    This report summarizes the results of a four-year project, entitled, ''Low-Cost Manufacturing Of Multilayer Ceramic Fuel Cells'', jointly funded by the U.S. Department of Energy, the State of Ohio, and by project participants. The project was led by NexTech Materials, Ltd., with subcontracting support provided by University of Missouri-Rolla, Michael A. Cobb & Co., Advanced Materials Technologies, Inc., Edison Materials Technology Center, Gas Technology Institute, Northwestern University, and The Ohio State University. Oak Ridge National Laboratory, though not formally a subcontractor on the program, supported the effort with separate DOE funding. The objective of the program was to develop advanced manufacturing technologies for making solid oxide fuel cell components that are more economical and reliable for a variety of applications. The program was carried out in three phases. In the Phase I effort, several manufacturing approaches were considered and subjected to detailed assessments of manufacturability and development risk. Estimated manufacturing costs for 5-kW stacks were in the range of $139/kW to $179/kW. The risk assessment identified a number of technical issues that would need to be considered during development. Phase II development work focused on development of planar solid oxide fuel cell elements, using a number of ceramic manufacturing methods, including tape casting, colloidal-spray deposition, screen printing, spin-coating, and sintering. Several processes were successfully established for fabrication of anode-supported, thin-film electrolyte cells, with performance levels at or near the state-of-the-art. The work in Phase III involved scale-up of cell manufacturing methods, development of non-destructive evaluation methods, and comprehensive electrical and electrochemical testing of solid oxide fuel cell materials and components.

  2. Studies on the finite element simulation in sheet metal stamping processes

    Science.gov (United States)

    Huang, Ying

    The sheet metal stamping process plays an important role in modern industry. With the ever-increasing demand for shape complexity, product quality and new materials, the traditional trial and error method for setting up a sheet metal stamping process is no longer efficient. As a result, the Finite Element Modeling (FEM) method has now been widely used. From a physical point of view, the formability and the quality of a product are influenced by several factors. The design of the product in the initial stage and the motion of the press during the production stage are two of these crucial factors. This thesis focuses on the numerical simulation for these two factors using FEM. Currently, there are a number of commercial FEM software systems available in the market. These software systems are based on an incremental FEM process that models the sheet metal stamping process in small incremental steps. Even though the incremental FEM is accurate, it is not suitable for the initial conceptual design for its needing of detailed design parameters and enormous calculation times. As a result, another type of FEM, called the inverse FEM method or one-step FEM method, has been proposed. While it is less accurate than that of the incremental method, this method requires much less computation and hence, has a great potential. However, it also faces a number of unsolved problems, which limits its application. This motivates the presented research. After the review of the basic theory of the inverse method, a new modified arc-length search method is proposed to find better initial solution. The methods to deal with the vertical walls are also discussed and presented. Then, a generalized multi-step inverse FEM method is proposed. It solves two key obstacles: the first one is to determine the initial solution of the intermediate three-dimensional configurations and the other is to control the movement of nodes so they could only slide on constraint surfaces during the search by

  3. Finite Element Models for Electron Beam Freeform Fabrication Process, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — This Small Business Innovation Research Phase II proposal offers to develop a comprehensive computer simulation methodology based on the finite element method for...

  4. Process for the production of prismatic graphite molded articles for high temperature fuel elements

    International Nuclear Information System (INIS)

    Huschka, H.; Rachor, L.; Hrovat, M.; Wolff, W.

    1976-01-01

    Prismatic graphite molded objects for high temperature fuel elements are prepared by producing the outer geometry and the holes for cooling channels and for receiving fuel and fertile materials in the formation of the carbon object

  5. Processes linking parents' and adolescents' religiousness and adolescent substance use: monitoring and self-control.

    Science.gov (United States)

    Kim-Spoon, Jungmeen; Farley, Julee P; Holmes, Christopher; Longo, Gregory S; McCullough, Michael E

    2014-05-01

    Empirical evidence suggests that religiousness is related negatively to adolescent substance use; yet, we know little about how such protective effects might occur. The current study examined whether parents' and adolescents' religiousness are associated positively with parental, religious, and self-monitoring, which in turn are related to higher self-control, thereby related to lower adolescent substance use. Participants were 220 adolescents (45 % female) who were interviewed at ages 10-16 and again 2.4 years later. Structural equation modeling analyses suggested that higher adolescents' religiousness at Time 1 was related to lower substance use at Time 2 indirectly through religious monitoring, self-monitoring, and self-control. Higher parents' religiousness at Time 1 was associated with higher parental monitoring at Time 2, which in turn was related to lower adolescent substance use at Time 2 directly and indirectly through higher adolescent self-control. The results illustrate that adolescents with high awareness of being monitored by God are likely to show high self-control abilities and, consequently, low substance use. The findings further suggest that adolescents' religiousness as well as their religious environments (e.g., familial context) can facilitate desirable developmental outcomes.

  6. Parents' Positive Role in Students' Learning Process at Ishik University Preparatory School

    Science.gov (United States)

    Tosun, Mustafa

    2015-01-01

    The reason that motivated me to initiate this writing is to emphasize the deficiency in the motivation and unwillingness of university youth cause of the parents approach toward the education at preparatory school. Moreover, my aim is to declare realistic suggestions about the issue with the help of observations that have been gained during the…

  7. Landau-Kleffner Syndrome: An Exploration of Parent Experience of the Diagnostic Process

    Science.gov (United States)

    Lemard-Reid, Daunette

    2014-01-01

    Landau-Kleffner syndrome (LKS) is a rare childhood disorder that is often misdiagnosed as autism or childhood psychosis because of overlapping symptom presentation. Favorable prognoses in LKS depend on early diagnosis and treatment. While much is known about the clinical basis for LKS diagnosis, little is known about parents' lived experience with…

  8. Store and process for intermediate or final storage of used fuel elements from a nuclear reactor

    International Nuclear Information System (INIS)

    Kumpf, H.

    1986-01-01

    The fuel elements are enclosed in boxes at the nuclear reactor and transported in these to the incoming station. Transport is a by truck, which makes it possible for the transport container to move in a vertical position, where the upper side is on the top side of the truck. The fuel elements in their boxes are handed over to a magazine there, which can be reached by a loading machine serving the storage room. (orig./HP) [de

  9. The influence of alloying elements on the hot-dip aluminizing process and on the subsequent high-temperature oxidation

    International Nuclear Information System (INIS)

    Glasbrenner, H.; Nold, E.; Voss, Z.

    1997-01-01

    For hot dip aluminizing HDA an Al melt was doped with one of the elements Mo, W or Nb with a nominal composition of about 1 wt%. In case of W, the nominal composition was achieved, not so for Mo and Nb. The influence of these elements on the coating formed and on the following oxidation process was investigated. Hot dip aluminizing was carried out at 800 C for 5 min under dry Ar atmosphere. The oxidation experiments were performed at 950 C for 24 h in air. Compared to the HDA processes with pure Al, the addition of the alloying elements lead to thinner intermetallic layers. A change in the oxidation behavior was observed as well concerning the suppression of internal oxidation and the formation of dense and close oxide scales. (orig.)

  10. Effect of RE elements on the microstructural evolution of as cast and SIMA processed Mg-4Al alloy

    International Nuclear Information System (INIS)

    Nayyeri, Mohammad Javad; Khomamizadeh, Farzad

    2011-01-01

    Research highlights: → In this article, we examined the effect of Rare Earth elements on the microstructural development of as cast and semisolid Mg-4Al alloy produced by SIMA process. → Our investigations contained metallographic observation, scanning electron microscope and quantitative metallographic methods. → Results showed that alloy's dendrites turn into larger fully dendritic shape with sharp and narrow arms from equiaxed rosette type as the amount of RE elements increased from 0 through 4 percent. → Also we studied the effect of RE elements on the quality and quantityof intragranular liquid droplets as well as kinetic of microstructural changes. → Moreover, the effect of REs on the other parameters such as fraction of liquid, shape factor and particle size was studied.In this article, we examined the effect of Rare Earth elements on the microstructural development of as cast and semisolid Mg-4Al alloy produced by SIMA process. Our investigations contained metallographic observation, scanning electron microscope and quantitative metallographic methods. Results showed that alloy's dendrites turn into larger fully dendritic shape with sharp and narrow arms from equiaxed rosette type as the amount of RE elements increased from 0 through 4 percent. Also we studied the effect of RE elements on the quality and quantityof intragranular liquid droplets as well as kinetic of microstructural changes. Moreover, the effect of REs on the other parameters such as fraction of liquid, shape factor and particle size was studied. - Abstract: In the present article, the effect of Rare Earth elements on the microstructural development of as cast and semisolid Mg-4Al alloy produced by SIMA process is studied. Investigation conducted by metallographic observation, scanning electron microscope and quantitative metallographic methods. Results showed that alloy's dendrites turn into larger fully dendritic shape with sharp and narrow arms from equiaxed rosette type as the

  11. Parental Choice of Schooling, Learning Processes and Inter-Ethnic Friendship Patterns: The Case of Malay Students in Chinese Primary Schools in Malaysia

    Science.gov (United States)

    Sua, Tan Yao; Ngah, Kamarudin; Darit, Sezali Md.

    2013-01-01

    This study surveys 200 Malay students enrolled in three Chinese primary schools in relation to three issues, i.e., parental choice of schooling, learning processes and inter-ethnic friendship patterns. The three issues are explored through a combination of quantitative and qualitative research methodologies. Parental expectations for their…

  12. Chemical evolution with rotating massive star yields - I. The solar neighbourhood and the s-process elements

    Science.gov (United States)

    Prantzos, N.; Abia, C.; Limongi, M.; Chieffi, A.; Cristallo, S.

    2018-05-01

    We present a comprehensive study of the abundance evolution of the elements from H to U in the Milky Way halo and local disc. We use a consistent chemical evolution model, metallicity-dependent isotopic yields from low and intermediate mass stars and yields from massive stars which include, for the first time, the combined effect of metallicity, mass loss, and rotation for a large grid of stellar masses and for all stages of stellar evolution. The yields of massive stars are weighted by a metallicity-dependent function of the rotational velocities, constrained by observations as to obtain a primary-like 14N behaviour at low metallicity and to avoid overproduction of s-elements at intermediate metallicities. We show that the Solar system isotopic composition can be reproduced to better than a factor of 2 for isotopes up to the Fe-peak, and at the 10 per cent level for most pure s-isotopes, both light ones (resulting from the weak s-process in rotating massive stars) and the heavy ones (resulting from the main s-process in low and intermediate mass stars). We conclude that the light element primary process (LEPP), invoked to explain the apparent abundance deficiency of the s-elements with A values of ^{12}C/^{13}C in halo red giants, which is rather due to internal processes in those stars.

  13. Brief report: identity processes in Filipino late adolescents and young adults: parental influences and mental health outcomes.

    Science.gov (United States)

    Pesigan, Ivan Jacob Agaloos; Luyckx, Koen; Alampay, Liane Peña

    2014-07-01

    This study focused on a process-oriented approach to identity formation using a sample of Filipino late adolescents and young adults (17-30 years; N = 779). Indirect relations between parenting and mental health via identity formation processes were examined. Two parenting dimensions (psychological control and support), two types of mental health outcomes (depression and psychological well-being), and five identity dimensions (commitment making (CM), identification with commitment (IC), exploration in breadth (EB), exploration in depth (ED), and ruminative exploration (RE)) were assessed. Recursive path analysis showed indirect relations between parenting and mental health via EB, ED, RE, and IC. Model differences between late adolescents (17-21 year olds) and young adults (22-30 year olds) were examined using multigroup path analysis. Results showed that the direct effect of psychological control on RE, and its indirect effect on depression through RE differed between the age groups. Implications and suggestions for future research are provided. Copyright © 2014 The Foundation for Professionals in Services for Adolescents. Published by Elsevier Ltd. All rights reserved.

  14. Enrichment of Rare Earth Elements during magmatic and post-magmatic processes: a case study from the Loch Loyal Syenite Complex, northern Scotland

    Science.gov (United States)

    Walters, A. S.; Goodenough, K. M.; Hughes, H. S. R.; Roberts, N. M. W.; Gunn, A. G.; Rushton, J.; Lacinska, A.

    2013-10-01

    Concern about security of supply of critical elements used in new technologies, such as the Rare Earth Elements (REE), means that it is increasingly important to understand the processes by which they are enriched in crustal settings. High REE contents are found in syenite-dominated alkaline complexes intruded along the Moine Thrust Zone, a major collisional zone in north-west Scotland. The most northerly of these is the Loch Loyal Syenite Complex, which comprises three separate intrusions. One of these, the Cnoc nan Cuilean intrusion, contains two mappable zones: a Mixed Syenite Zone in which mafic melasyenite is mixed and mingled with leucosyenite and a Massive Leucosyenite Zone. Within the Mixed Syenite Zone, hydrothermal activity is evident in the form of narrow altered veins dominated by biotite and magnetite; these are poorly exposed and their lateral extent is uncertain. The REE mineral allanite is relatively abundant in the melasyenite and is extremely enriched in the biotite-magnetite veins, which have up to 2 % total rare earth oxides in bulk rock analyses. An overall model for development of this intrusion can be divided into three episodes: (1) generation of a Light Rare Earth Element (LREE)-enriched parental magma due to enrichment of the mantle source by subduction of pelagic carbonates; (2) early crystallisation of allanite in melasyenite, due to the saturation of the magma in the LREE; and (3) hydrothermal alteration, in three different episodes identified by petrography and mineral chemistry, generating the intense enrichment of REE in the biotite-magnetite veins. Dating of allanite and titanite in the biotite-magnetite veins gives ages of c. 426 Ma, overlapping with previously published crystallisation ages for zircon in the syenite.

  15. Evolution of the Campanian Ignimbrite Magmatic System II: Trace Element and Th Isotopic Evidence for Open-System Processes

    Science.gov (United States)

    Bohrson, W. A.; Spera, F. J.; Fowler, S.; Belkin, H.; de Vivo, B.

    2005-12-01

    The Campanian Ignimbrite, a large volume (~200 km3 DRE) trachytic to phonolitic ignimbrite was deposited at ~39.3 ka and represents the largest of a number of highly explosive volcanic events in the region near Naples, Italy. Thermodynamic modeling of the major element evolution using the MELTS algorithm (see companion contribution by Fowler et al.) provides detailed information about the identity of and changes in proportions of solids along the liquid line of descent during isobaric fractional crystallization. We have derived trace element mass balance equations that explicitly accommodate changing mineral-melt bulk distribution coefficients during crystallization and also simultaneously satisfy energy and major element mass conservation. Although major element patterns are reasonably modeled assuming closed system fractional crystallization, modeling of trace elements that represent a range of behaviors (e.g. Zr, Nb, Th, U, Rb, Sm, Sr) yields trends for closed system fractionation that are distinct from those observed. These results suggest open-system processes were also important in the evolution of the Campanian magmatic system. Th isotope data yield an apparent isochron that is ~20 kyr younger than the age of the deposit, and age-corrected Th isotope data indicate that the magma body was an open-system at the time of eruption. Because open-system processes can profoundly change isotopic characteristics of a magma body, these results illustrate that it is critical to understand the contribution that open-system processes make to silicic magma bodies prior to assigning relevance to age or timescale information derived from isotope systematics. Fluid-magma interaction has been proposed as a mechanism to change isotopic and elemental characteristics of magma bodies, but an evaluation of the mass and thermal constraints on such a process suggest large-scale fluid-melt interaction at liquidus temperatures is unlikely. In the case of the magma body associated with

  16. Culture's Influence on Stressors, Parental Socialization, and Developmental Processes in the Mental Health of Children of Immigrants.

    Science.gov (United States)

    Kim, Su Yeong; Schwartz, Seth J; Perreira, Krista M; Juang, Linda P

    2018-05-07

    Children of immigrants represent one in four children in the United States and will represent one in three children by 2050. Children of Asian and Latino immigrants together represent the majority of children of immigrants in the United States. Children of immigrants may be immigrants themselves, or they may have been born in the United States to foreign-born parents; their status may be legal or undocumented. We review transcultural and culture-specific factors that influence the various ways in which stressors are experienced; we also discuss the ways in which parental socialization and developmental processes function as risk factors or protective factors in their influence on the mental health of children of immigrants. Children of immigrants with elevated risk for mental health problems are more likely to be undocumented immigrants, refugees, or unaccompanied minors. We describe interventions and policies that show promise for reducing mental health problems among children of immigrants in the United States.

  17. Don't end up in the fields: identity construction among Mexican adolescent immigrants, their parents, and sociocontextual processes.

    Science.gov (United States)

    Maciel, Jose A; Knudson-Martin, Carmen

    2014-10-01

    This grounded theory study of 16 Mexican immigrant adolescents and 20 of their parents examines how they construct relational identities within their families, at school, with friends, and in the larger society. Results focus on a core identity bind faced by the adolescents: immigration messages from parents that say, "don't be like me" and the societal message, "you're not like us." Response to this bind was guided by two contrasting sets of identity narratives: Empowering narratives invited an intentional approach to school and life choices. Restricting narratives maintained an ambivalent approach to school and life choices. Resolution of the identity bind was a collective, ongoing process that has implications for Mexican immigrant families and the professionals who work with them. © 2013 American Association for Marriage and Family Therapy.

  18. An Assessment of the Effects of Hydrotherapy During the Active Phase of Labor on the Labor Process and Parenting Behavior.

    Science.gov (United States)

    Tuncay, Semra; Kaplan, Sena; Moraloglu Tekin, Ozlem

    2017-12-01

    This study was conducted to assess the effect on labor process and parenting behavior of hydrotherapy applied during the active phase of labor. This quasi-experimental study was conducted by using an equivalent comparison group ( n = 40). The participants in the experimental group whose cervical dilation was 5 cm were taken to the hydrotherapy tub. This application continued until cervical dilation reached 10 cm. The Participants Questionnaire, The Birth Follow-up Questionnaire, The Postpartum ]collection tools. The duration of the active phase and second stage of labor was extremely short in the experimental group in comparison with the equivalent comparison group ( p = .001). The Visual Analogue Scale (VAS) scores of the experimental group were lower than those of the equivalent comparison group when cervical dilation was 6 cm and 10 cm ( p = .001). The experimental group also displayed more positive parenting behavior and positive labor feeling ( p = .001).

  19. COST action TD1407: network on technology-critical elements (NOTICE)--from environmental processes to human health threats.

    Science.gov (United States)

    Cobelo-García, A; Filella, M; Croot, P; Frazzoli, C; Du Laing, G; Ospina-Alvarez, N; Rauch, S; Salaun, P; Schäfer, J; Zimmermann, S

    2015-10-01

    The current socio-economic, environmental and public health challenges that countries are facing clearly need common-defined strategies to inform and support our transition to a sustainable economy. Here, the technology-critical elements (which includes Ga, Ge, In, Te, Nb, Ta, Tl, the Platinum Group Elements and most of the rare-earth elements) are of great relevance in the development of emerging key technologies-including renewable energy, energy efficiency, electronics or the aerospace industry. In this context, the increasing use of technology-critical elements (TCEs) and associated environmental impacts (from mining to end-of-life waste products) is not restricted to a national level but covers most likely a global scale. Accordingly, the European COST Action TD1407: Network on Technology-Critical Elements (NOTICE)-from environmental processes to human health threats, has an overall objective for creating a network of scientists and practitioners interested in TCEs, from the evaluation of their environmental processes to understanding potential human health threats, with the aim of defining the current state of knowledge and gaps, proposing priority research lines/activities and acting as a platform for new collaborations and joint research projects. The Action is focused on three major scientific areas: (i) analytical chemistry, (ii) environmental biogeochemistry and (iii) human exposure and (eco)-toxicology.

  20. Longitudinal associations between marital stress and externalizing behavior : Does Parental Sense of Competence Mediate Processes?

    NARCIS (Netherlands)

    van Eldik, W. M.; Prinzie, Peter; Dekovic, M.; de Haan, A.D.

    2017-01-01

    Ecological theories emphasize associations between children and elements within their family system, such as the marital relationship. Within a developmental perspective, we longitudinally examined (a) dynamic associations between marital stress and children’s externalizing behavior, (b) mediation

  1. Longitudinal associations between marital stress and externalizing behavior: Does parental sense of competence mediate processes?

    NARCIS (Netherlands)

    Eldik, W.M. van; Prinzie, P.; Dekoviç, M.; Haan, A.D. de

    2017-01-01

    Ecological theories emphasize associations between children and elements within their family system, such as the marital relationship. Within a developmental perspective, we longitudinally examined (a) dynamic associations between marital stress and children's externalizing behavior, (b) mediation

  2. Parental acceptance, postpartum depression, and maternal sensitivity: mediating and moderating processes.

    Science.gov (United States)

    Crockenberg, Susan C; Leerkes, Esther M

    2003-03-01

    Mothers (n = 92), fathers (n = 84), and their infants (60% male) participated in a longitudinal study of postpartum depression and maternal sensitivity. Mothers completed questionnaire measures of remembered parental acceptance, depressive symptoms, and infant distress to novelty and limits. Mothers and partners reported on marital aggression and avoidance. Maternal sensitivity was observed in the laboratory at 6 months. Characteristics of mothers, partners, and infants combined to predict postpartum depression and maternal sensitivity. Remembered parental rejection predicted postpartum depressive symptoms with prenatal depression controlled; self-esteem mediated this effect. Paternal acceptance buffered against postpartum depression when infants were highly reactive and when partners were aggressive. Paternal acceptance reduced the impact of postpartum depression on maternal sensitivity; having an aggressive marital partner exacerbated the effect.

  3. Platinum Group Elements (PGE) geochemistry of komatiites and boninites from Dharwar Craton, India: Implications for mantle melting processes

    Science.gov (United States)

    Saha, Abhishek; Manikyamba, C.; Santosh, M.; Ganguly, Sohini; Khelen, Arubam C.; Subramanyam, K. S. V.

    2015-06-01

    High MgO volcanic rocks having elevated concentrations of Ni and Cr are potential hosts for platinum group elements (PGE) owing to their primitive mantle origin and eruption at high temperatures. Though their higher PGE abundance is economically significant in mineral exploration studies, their lower concentrations are also valuable geochemical tools to evaluate petrogenetic processes. In this paper an attempt has been made to evaluate the PGE geochemistry of high MgO volcanic rocks from two greenstone belts of western and eastern Dharwar Craton and to discuss different mantle processes operative at diverse geodynamic settings during the Neoarchean time. The Bababudan greenstone belt of western and Gadwal greenstone belt of eastern Dharwar Cratons are dominantly composed of high MgO volcanic rocks which, based on distinct geochemical characteristics, have been identified as komatiites and boninites respectively. The Bababudan komatiites are essentially composed of olivine and clinopyroxene with rare plagioclase tending towards komatiitic basalts. The Gadwal boninites contain clinopyroxene, recrystallized hornblende with minor orthopyroxene, plagioclase and sulphide minerals. The Bababudan komatiites are Al-undepleted type (Al2O3/TiO2 = 23-59) with distinctly high MgO (27.4-35.8 wt.%), Ni (509-1066 ppm) and Cr (136-3036 ppm) contents. These rocks have low ΣPGE (9-42 ppb) contents with 0.2-2.4 ppb Iridium (Ir), 0.2-1.4 ppb Osmium (Os) and 0.4-4.4 ppb Ruthenium (Ru) among Iridium group PGE (IPGE); and 1.4-16.2 ppb Platinum (Pt), 2.8-19 ppb Palladium (Pd) and 0.2-9.8 ppb Rhodium (Rh) among Platinum group PGE (PPGE). The Gadwal boninites are high-Ca boninites with CaO/Al2O3 ratios varying between 0.8 and 1.0, with 12-24 wt.% MgO, 821-1168 ppm Ni and 2307-2765 ppm Cr. They show higher concentration of total PGE (82-207 ppb) with Pt concentration ranging from 13 to 19 ppb, Pd between 65 and 180 ppb and Rh in the range of 1.4-3 ppb compared to the Bababudan komatiites. Ir

  4. Improvement of range spatial resolution of medical ultrasound imaging by element-domain signal processing

    Science.gov (United States)

    Hasegawa, Hideyuki

    2017-07-01

    The range spatial resolution is an important factor determining the image quality in ultrasonic imaging. The range spatial resolution in ultrasonic imaging depends on the ultrasonic pulse length, which is determined by the mechanical response of the piezoelectric element in an ultrasonic probe. To improve the range spatial resolution without replacing the transducer element, in the present study, methods based on maximum likelihood (ML) estimation and multiple signal classification (MUSIC) were proposed. The proposed methods were applied to echo signals received by individual transducer elements in an ultrasonic probe. The basic experimental results showed that the axial half maximum of the echo from a string phantom was improved from 0.21 mm (conventional method) to 0.086 mm (ML) and 0.094 mm (MUSIC).

  5. Process and device for cooling of nuclear reactor fuel elements enclosed in a transport container

    International Nuclear Information System (INIS)

    Stiefel, M.

    1986-01-01

    In order to remove the post-decay heat of the fuel elements contained in them, transport containers for burnt-up fuel elements can be connected to a water cooling circuit. In order to avoid thermal shocks, a tenside forming foam and air are introduced into the cooling circuit before its entry into the transport container in the direction of flow. The tenside and air continue to be supplied until the temperature inside the transport container has fallen below the temperature at which the foam is destroyed. By adding tenside and air, a two phase mixture is produced, which foams greatly when it enters the transport container and which cools the fuel elements so as to protect them.(orig./HP) [de

  6. The process of institutionalization-deinstitutionalization and children’s psychological adjustment in Rwanda:: Parents matter

    OpenAIRE

    Nsabimana, Epaphrodite; Martin-Sölch, Chantal

    2016-01-01

    Negative effects of institutionalization and positive effects of deinstitutionalization on children’s wellbeing have been well documented. However, the majority of reports on institutional care rely on adult interviews and there is a wide disparity of results and methodologies in few result-oriented studies of deinstitutionalization outcome. In addition, though all over the world, especially in developed countries, many children in orphanage have parents; little is known about on the effect o...

  7. How National Culture and Parental Style Affect the Process of Adolescents’ Ecological Resocialization

    Directory of Open Access Journals (Sweden)

    Elodie Gentina

    2015-06-01

    Full Text Available The role of adolescents as influencers on their families’ environmental behavior is potentially a catalyst for change towards increasing eco-friendly actions. In this paper, the authors report on a cross-cultural study of ecological resocialization in France and India. Using in-depth dyadic interviews, they investigated parental styles, cultural attributes and extent of adolescents’ influence over parental eco-behavior. The study reveals that ecological resocialization across countries differs substantially, according to a combination of national cultural values, parental style and influence strategy. French teens exhibit a greater impact than Indian teens on their parents’ eco-behavior and use bilateral influence strategies. In India, not all mothers engage in ecological resocialization, but those who do are susceptible to unilateral strategies. The role of environmental knowledge, and the context and effectiveness of each kind of strategy is discussed. The findings have implications for how public policy officials and agencies can encourage adolescents as key resocialization agents to influence their parents’ pro-environmental consumption by using the most adapted influence strategy across cultures.

  8. Process for separately recovering uranium, transuranium elements, and fission products of uranium from atomic reactor fuel

    International Nuclear Information System (INIS)

    Balal, A.L.; Metscher, K.; Muehlig, B.; Reichmuth, C.; Schwarz, B.; Zimen, K.E.

    1976-01-01

    Spent reactor fuel elements are dissolved in dilute nitric acid. After addition of acetic acid as a complexing agent, the nitric acid is partly decomposed and the mixture subjected to electrolysis while a carrier liquid, which may be dilute acetic acid or a dilute mixture of acetic acid and nitric acid is caused to flow in the electric field between the electrodes either against the direction of ion migration or transversely thereto. The ions of uranium, plutonium, and other transuranium elements, and of fission products accumulate in discrete portions of the electrolyte and are separately withdrawn as at least three fractions after one or more stages of electrolysis

  9. The role of interpretation processes and parental discussion in the media's effects on adolescents' use of alcohol.

    Science.gov (United States)

    Austin, E W; Pinkleton, B E; Fujioka, Y

    2000-02-01

    The process that connects media use with alcohol-related beliefs and behaviors has not been well documented. To address this issue, we examined adolescents' viewing patterns, beliefs about alcohol and media messages, and parental discussion of media messages in the context of a theoretical model of message interpretation processes. Measures included the degree to which adolescents found portrayals desirable, realistic, and similar to their own lives; the degree to which they wanted to be like (identify with) the portrayals; and the degree to which they associated positive outcomes with drinking alcohol (expectancies). Cross-sectional survey. Two public high schools in the California central coastal area that include a diverse population in terms of ethnic origin, income level, and education level. Ninth-grade students (n = 252) and 12th-grade students (n = 326). Students reported the number of days within the past week watching various genres of television content, along with perceptions of realism of content, desirability of portrayals, identification with portrayals, expectancies toward alcohol use, personal norms for alcohol use, desire for products with alcohol logos, current alcohol use, frequency of parental reinforcement, and counter-reinforcement of television messages. Associations were examined via hierarchical multiple regression analysis. Effects of media exposure on drinking behavior, controlling for grade level, ethnicity, gender, household income, and education levels were primarily positive and indirect, operating through a number of intervening beliefs, especially expectancies (beta =.59; r(2) =.33). Direct associations, primarily with exposure to late-night talk shows (beta =.12; r(2) =.01), were small. Parental discussion also affected behavior indirectly, operating through expectancies, identification, and perceived realism. The appeal of products with alcohol logos, which was higher among the younger students (t = 3.44) and predicted by

  10. Focusing on natural elements in the early design process, new potentials for architects?

    DEFF Research Database (Denmark)

    Sjøstedt, Victoria

    2010-01-01

    influence the drawn result, have been investigated. The result shows that simple means of environmental integration, as represented by natural elements, played an important role in the development of the design solutions, and had a much larger impact on the drawn result compared to proposed technological...

  11. Excessive Yield of Second Charged ions of Heavy Elements in Laser Plasma Expansion Process

    International Nuclear Information System (INIS)

    Kouznetsov, G.B.; Sysoev, A.A.

    2002-01-01

    LAMAS-IOM TOF-MS that was recently designed for inorganic quantitative analysis is also well suitable for investigation of laser irradiation interaction with solids. This feature allows one to analyze plasma on early stage and gives an excellent possibility to complete existent physical model. This work is dedicated to investigation of yield doubly charged ions for different elements

  12. Examining the Process of Change in an Evidence-Based Parent Training Intervention: A Qualitative Study Grounded in the Experiences of Parents

    Science.gov (United States)

    Holtrop, Kendal N.

    2011-01-01

    The evidence-based parent training intervention known as Parent Management Training-the Oregon Model (PMTO) is one particularly well-supported treatment approach for addressing child behavioral problems. Yet, there remains a need to further examine how this intervention promotes change. The purpose of this study was to develop a grounded theory…

  13. Perceived parental control processes, parent-child relational qualities, and psychological well-being in chinese adolescents with and without economic disadvantage.

    Science.gov (United States)

    Shek, Daniel T L

    2005-06-01

    The author assessed the relationships between poverty and perceived parenting style, parent-child relationships, and adolescent psychological well-being in Chinese secondary school students (N = 3,017). Participants completed questionnaires designed to assess (a) the degree to which their parents used monitoring, discipline, and other techniques to control their behavior; (b) the extent to which their parents attempted to control them in a way that undermined their psychological development; (c) the parent-child relational qualities, such as the child's readiness to communicate with the parents and perceived mutual trust; and (d) the child's psychological well-being. Although adolescents with economic disadvantage did not differ from adolescents without economic disadvantage on the maternal variables (except on parental knowledge and parental monitoring), adolescents whose families were receiving public assistance generally perceived paternal behavioral control and father-child relational qualities to be more negative than did adolescents who were not receiving public assistance. The author found psychological well-being (shown by hopelessness, mastery, life satisfaction, self-esteem) of adolescents experiencing economic disadvantage to be weaker than that of adolescents not experiencing economic disadvantage.

  14. Perceived parenting dimensions and identity styles: exploring the socialization of adolescents' processing of identity-relevant information.

    Science.gov (United States)

    Smits, Ilse; Soenens, Bart; Luyckx, Koen; Duriez, Bart; Berzonsky, Michael; Goossens, Luc

    2008-04-01

    This study examined the relationships between crucial dimensions of perceived parenting (support, behavioral control, and psychological control) and the three identity styles defined by Berzonsky [Berzonsky, M. D. (1990). Self-construction over the life span: A process perspective on identity formation. Advances in Personal Construct Psychology, 1, 155-186.]. Each identity style was hypothesized to relate to a specific pattern of perceived parenting dimensions. Hypotheses were examined in a sample of middle and late adolescents (n=674). An information-oriented style was positively predicted by parental support. Contrary to expectations, however, an information-oriented style was also positively predicted by psychological control. A normative identity style was positively predicted by support and behavioral control. In line with expectations, a diffuse-avoidant identity style was positively predicted by psychological control and negatively by maternal (but not paternal) behavioral control. Findings are discussed in light of the literature on the socialization of identity formation and directions for future research are outlined.

  15. The impact of process variables and wear characteristics on the cutting tool performance using Finite Element Analysis

    OpenAIRE

    Jiang, Xiaoheng

    2016-01-01

    The frequent failure of cutting tool in the cutting process may cause a huge loss of money and time especially for hard to machine materials such as titanium alloys. Thus this study is mainly focused on the impact of wear characteristics and process variables on the cutting tool which is ignored by most of researchers. A thermo-mechanical finite element model of orthogonal metal cutting with segment chip formation is presented. This model can be used to predict the process performance in the ...

  16. Hispanic parents' experiences of the process of caring for a child undergoing routine surgery: a focus on pain and pain management.

    Science.gov (United States)

    Olshansky, Ellen; Zender, Robynn; Kain, Zeev N; Rosales, Alvina; Guadarrama, Josue; Fortier, Michelle A

    2015-07-01

    The purpose was to understand the processes Hispanic parents undergo in managing postoperative care of children after routine surgical procedures. Sixty parents of children undergoing outpatient surgery were interviewed. Data were analyzed using grounded theory methodology. Parents experienced five subprocesses that comprised the overall process of caring for a child after routine surgery: (a) becoming informed; (b) preparing; (c) seeking reassurance; (d) communicating with one's child; and (e) making pain management decisions. Addressing cultural factors related to pain management in underserved families may instill greater confidence in managing pain. © 2015, Wiley Periodicals, Inc.

  17. Conceptual Frameworks for the Workplace Change Adoption Process: Elements Integration from Decision Making and Learning Cycle Process.

    Science.gov (United States)

    Radin Umar, Radin Zaid; Sommerich, Carolyn M; Lavender, Steve A; Sanders, Elizabeth; Evans, Kevin D

    2018-05-14

    Sound workplace ergonomics and safety-related interventions may be resisted by employees, and this may be detrimental to multiple stakeholders. Understanding fundamental aspects of decision making, behavioral change, and learning cycles may provide insights into pathways influencing employees' acceptance of interventions. This manuscript reviews published literature on thinking processes and other topics relevant to decision making and incorporates the findings into two new conceptual frameworks of the workplace change adoption process. Such frameworks are useful for thinking about adoption in different ways and testing changes to traditional intervention implementation processes. Moving forward, it is recommended that future research focuses on systematic exploration of implementation process activities that integrate principles from the research literature on sensemaking, decision making, and learning processes. Such exploration may provide the groundwork for development of specific implementation strategies that are theoretically grounded and provide a revised understanding of how successful intervention adoption processes work.

  18. Likelihood-based inference for discretely observed birth-death-shift processes, with applications to evolution of mobile genetic elements.

    Science.gov (United States)

    Xu, Jason; Guttorp, Peter; Kato-Maeda, Midori; Minin, Vladimir N

    2015-12-01

    Continuous-time birth-death-shift (BDS) processes are frequently used in stochastic modeling, with many applications in ecology and epidemiology. In particular, such processes can model evolutionary dynamics of transposable elements-important genetic markers in molecular epidemiology. Estimation of the effects of individual covariates on the birth, death, and shift rates of the process can be accomplished by analyzing patient data, but inferring these rates in a discretely and unevenly observed setting presents computational challenges. We propose a multi-type branching process approximation to BDS processes and develop a corresponding expectation maximization algorithm, where we use spectral techniques to reduce calculation of expected sufficient statistics to low-dimensional integration. These techniques yield an efficient and robust optimization routine for inferring the rates of the BDS process, and apply broadly to multi-type branching processes whose rates can depend on many covariates. After rigorously testing our methodology in simulation studies, we apply our method to study intrapatient time evolution of IS6110 transposable element, a genetic marker frequently used during estimation of epidemiological clusters of Mycobacterium tuberculosis infections. © 2015, The International Biometric Society.

  19. Stress analysis of the O-element pipe during the process of flue gases purification

    Directory of Open Access Journals (Sweden)

    Nekvasil R.

    2008-11-01

    Full Text Available Equipment for flue gases purification from undesired substances is used throughout power and other types of industry. This paper deals with damaging of the O-element pipe designed to remove sulphur from the flue gases, i.e. damaging of the pipe during flue gases purification. This purification is conducted by spraying the water into the O-shaped pipe where the flue gases flow. Thus the sulphur binds itself onto the water and gets removed from the flue gas. Injection of cold water into hot flue gases, however, causes high stress on the inside of the pipe, which can gradually damage the O-element pipe. In this paper initial injection of water into hot pipe all the way to stabilization of temperature fields will be analyzed and the most dangerous places which shall be considered for fatigue will be determined.

  20. Asymmetric designed sintered metal filter elements in the HTF process of LILW vitrification plant

    International Nuclear Information System (INIS)

    Roehlig, Rainer

    2005-01-01

    Sintered metal filter elements have been used for years and have been successfully in operation in different application. The technical and economical advantages of only recently developed asymmetric Metallic Membranes elements, which operate as a surface filter, will be shown in comparison with standard sintered metal filter cartridges. The permeability, particle retention and back flushing performance have been improved. In order to achieve this, an asymmetric structure was designed in which an active filtration layer is applied onto a coarse porous metal support material made out of the same alloy. The economical benefits for customers are low maintenance and reduced investment cost as well as defined particle retention as is required by the users

  1. Innovative Application of Mechanical Activation for Rare Earth Elements Recovering: Process Optimization and Mechanism Exploration

    OpenAIRE

    Quanyin Tan; Chao Deng; Jinhui Li

    2016-01-01

    With the rapidly expanding use of fluorescent lamps (FLs) and increasing interest in conservation and sustainable utilization of critical metals such as rare earth elements (REEs), the recovering of REEs from phosphors in waste FLs is becoming a critical environmental and economic issue. To effectively recycle REEs with metallurgical methods, mechanical activation by ball milling was introduced to pretreat the waste phosphors. This current study put the emphasis on the mechanical activation a...

  2. Liver CT image processing: A short introduction of the technical elements

    International Nuclear Information System (INIS)

    Masutani, Y.; Uozumi, K.; Akahane, Masaaki; Ohtomo, Kuni

    2006-01-01

    In this paper, we describe the technical aspects of image analysis for liver diagnosis and treatment, including the state-of-the-art of liver image analysis and its applications. After discussion on modalities for liver image analysis, various technical elements for liver image analysis such as registration, segmentation, modeling, and computer-assisted detection are covered with examples performed with clinical data sets. Perspective in the imaging technologies is also reviewed and discussed

  3. Liver CT image processing: a short introduction of the technical elements.

    Science.gov (United States)

    Masutani, Y; Uozumi, K; Akahane, Masaaki; Ohtomo, Kuni

    2006-05-01

    In this paper, we describe the technical aspects of image analysis for liver diagnosis and treatment, including the state-of-the-art of liver image analysis and its applications. After discussion on modalities for liver image analysis, various technical elements for liver image analysis such as registration, segmentation, modeling, and computer-assisted detection are covered with examples performed with clinical data sets. Perspective in the imaging technologies is also reviewed and discussed.

  4. Finite element simulation of the welding process and structural behaviour of welded components

    International Nuclear Information System (INIS)

    Locci, J.M.; Rouvray, A. de; Barbe, B.; Poirier, J.

    1977-01-01

    In the field of inelastic analysis of nuclear metal structures, the computation of residual stresses in welds, and their effects on the strength of welded components is of major importance. This paper presents an experimentally checked finite element simulation with the general nonlinear program PAM NEP-D, of the electron beam welding of two thick hemispherical shells, and the behaviour of the welded sphere under various additional thermomechanical sollicitations. (Auth.)

  5. Development of fabrication process of upper nozzle BIBLIS type of PWR fuel element

    International Nuclear Information System (INIS)

    Miranda, O.; Lorenzo, D.F.R.

    1982-01-01

    Process and parameters of milling and welding of a upper nozzle BIBLIS type prototype are presented. Milling process, cutting tools studies, production devices and inspection were developed and researched. (author) [pt

  6. Characterization of frictional melting processes in subduction zone faults by trace element and isotope analyses

    Science.gov (United States)

    Ishikawa, T.; Ujiie, K.

    2017-12-01

    Pseudotachylytes found in exhumed accretionary complexes, which are considered to be formed originally at seismogenic depths, are of great importance for elucidating frictional melting and concomitant dynamic weakening of the fault during earthquake in subduction zones. However, fluid-rich environment of the subduction zone faults tends to cause extensive alteration of the pseudotachylyte glass matrix in later stages, and thus it has been controversial that pseudotachylytes are rarely formed or rarely preserved. Chemical analysis of the fault rocks, especially on fluid-immobile trace elements and isotopes, can be a useful means to identify and quantify the frictional melting occurred in subduction zone faults. In this paper, we report major and trace element and Sr isotope compositions for pseudotachylyte-bearing dark veins and surrounding host rocks from the Mugi area of the Shimanto accretionary complex (Ujiie et al., J. Struct. Geol. 2007). Samples were collected from a rock chip along the microstructure using a micro-drilling technique, and then analyzed by ICP-MS and TIMS. Major element compositions of the dark veins showed a clear shift from the host rock composition toward the illite composition. The dark veins, either unaltered or completely altered, were also characterized by extreme enrichment in some of the trace elements such as Ti, Zr, Nb and Th. These results are consistent with disequilibrium melting of the fault zone. Model calculations revealed that the compositions of the dark veins can be produced by total melting of clay-rich matrix in the source rock, leaving plagioclase and quartz grains almost unmolten. The calculations also showed that the dark veins are far more enriched in melt component than that expected from the source rock compositions, suggesting migration and concentration of frictional melt during the earthquake faulting. Furthermore, Sr isotope data of the dark veins implied the occurrence of frictional melting in multiple stages

  7. Enhancing biogas production from vinasse in sugarcane biorefineries: Effects of urea and trace elements supplementation on process performance and stability.

    Science.gov (United States)

    Janke, Leandro; Leite, Athaydes F; Batista, Karla; Silva, Witan; Nikolausz, Marcell; Nelles, Michael; Stinner, Walter

    2016-10-01

    In this study, the effects of nitrogen, phosphate and trace elements supplementation were investigated in a semi-continuously operated upflow anaerobic sludge blanket system to enhance process stability and biogas production from sugarcane vinasse. Phosphate in form of KH2PO4 induced volatile fatty acids accumulation possibly due to potassium inhibition of the methanogenesis. Although nitrogen in form of urea increased the reactor's alkalinity, the process was overloaded with an organic loading rate of 6.1gCODL(-1)d(-1) and a hydraulic retention time of 3.6days. However, by supplementing urea and trace elements a stable operation even at an organic loading rate of 9.6gCODL(-1)d(-1) and a hydraulic retention time of 2.5days was possible, resulting in 79% higher methane production rate with a stable specific methane production of 239mLgCOD(-1). Copyright © 2016 Elsevier Ltd. All rights reserved.

  8. Finite element modelling of shot peening process: Prediction of the compressive residual stresses, the plastic deformations and the surface integrity

    International Nuclear Information System (INIS)

    Frija, M.; Hassine, T.; Fathallah, R.; Bouraoui, C.; Dogui, A.

    2006-01-01

    This paper presents a numerical simulation of the shot peening process using finite element method. The majority of the controlling parameters of the process have been taken into account. The shot peening loading has been characterised by using energy equivalence between the dynamic impact and a static indentation of a peening shot in the treated surface. The behaviour of the subjected material is supposed to be elastic plastic with damage. An integrated law of the damage proposed by Lemaitre and Chaboche has been used. The proposed model leads to obtain the residual stress, the plastic deformation profiles and the surface damage. An application on a shot peened Ni-based super alloy Waspaloy has been carried out. The comparison of the residual stresses, obtained by X-ray diffraction method and by finite element calculation, shows a good correlation. The in-depth profile of the plastic deformations and the superficial damage values are in good agreement with the experimental observations

  9. Process for surface treatment of zirconium-containing cladding materials for fuel element or other components for nuclear reactors

    International Nuclear Information System (INIS)

    Videm, K.G.; Lunde, L.R.; Kooyman, H.H.

    1975-01-01

    A process for the surface treatment of zirconium-base cladding materials for fuel elements or other components for nuclear reactors is described. The treatment includes pickling the cladding material in a fluoride-containing bath, and then applying a protective coating through oxidation to the pickled cladding material. The fluoride-containing contaminants which remain on the surface of the cladding material during pickling are removed or rendered harmless by anodic oxidation

  10. Discretisation of the non-linear heat transfer equation for food freezing processes using orthogonal collocation on finite elements

    Directory of Open Access Journals (Sweden)

    E. D. Resende

    2007-09-01

    Full Text Available The freezing process is considered as a propagation problem and mathematically classified as an "initial value problem." The mathematical formulation involves a complex situation of heat transfer with simultaneous changes of phase and abrupt variation in thermal properties. The objective of the present work is to solve the non-linear heat transfer equation for food freezing processes using orthogonal collocation on finite elements. This technique has not yet been applied to freezing processes and represents an alternative numerical approach in this area. The results obtained confirmed the good capability of the numerical method, which allows the simulation of the freezing process in approximately one minute of computer time, qualifying its application in a mathematical optimising procedure. The influence of the latent heat released during the crystallisation phenomena was identified by the significant increase in heat load in the early stages of the freezing process.

  11. Application limits of finite element models for simulation of shock transfer processes in concrete structures

    International Nuclear Information System (INIS)

    Krutzik, Norbert J.; Eibl, Josef

    2005-01-01

    Shocks on building structures due to impact loads (drop of wreckage and heavy masses from accidents, transport operations, explosions, etc.), especially in case of a postulated aircraft crash, may lead to feasibility problems due to high-induced vibrations and large expenditures at safety-related systems accommodated inside the building structures. A rational and cost-effective qualification of the functionality of such systems requires the prediction of reliable information about the nature of structural responses induced by impact loading in the corresponding regions of the structure. The analytic derivation of realistic and reliable structural responses requires the application of adequate mathematical models and methods as well as a critical evaluation of all factors that influence the entire shock transmission path, from the area of impact to the site of installation of the affected component or system in the structure. Despite extensive studies and computational analyses of impact-induced shocks performed using finite element simulation method, limited and insufficient experimental results to date have precluded a complete investigation and clarification of several 'peculiarities' in the field of shock transmission in finite element models. This refers mainly to the divergence of results observed using FE models when not considering a the required FE element discretization ratio as well as to the attenuation and scatter behavior of the dynamic response results obtained for large building structures and given large distances between the load impact application areas and the component anchoring locations. The cause for such divergences are related to several up to now not clarified 'phenomena' of FE models especially the low-pass filtering effects and dispersion characteristics of FE models

  12. Material characterization and finite element simulations of aluminum alloy sheets during non-isothermal forming process

    Science.gov (United States)

    Zhang, Nan

    The utilization of more non-ferrous materials is one of the key factors to succeed out of the constantly increasing demand for lightweight vehicles in automotive sector. Aluminum-magnesium alloys have been identified as the most promising substitutions to the conventional steel without significant compromise in structural stiffness and strength. However, the conventional forming methods to deform the aluminum alloy sheets are either costly or insufficient in formability which limit the wide applications of aluminum alloy sheets. A recently proposed non-isothermal hot stamping approach, which is also referred as Hot Blank - Cold Die (HB-CD) stamping, aims at fitting the commercial grade aluminum alloy sheets, such as AA5XXX and AA7XXX, into high-volume and cost-effective production for automotive sector. In essence, HB-CD is a mutation of the conventional hot stamping approach for boron steel (22MnB5) which deforms the hot blank within the cold tool set. By elevating the operation temperature, the formability of aluminum alloy sheets can be significantly improved. Meanwhile, heating the blank only and deforming within the cold tool sets allow to reduce the energy and time consumed. This research work aims at conducting a comprehensive investigation of HB-CD with particular focuses on material characterization, constitutive modeling and coupled thermo-mechanical finite element simulations with validation. The material properties of AA5182-O, a popular commercial grade of aluminum alloy sheet in automotive sector, are obtained through isothermal tensile testing at temperatures from 25° to 300°, covering a quasi-static strain-rate range (0.001--0.1s-1). As the state-of-the-art non-contact strain measurement technique, digital image correlation (DIC) system is utilized to evaluate the stress-strain curves as well as to reveal the details of material deformation with full-field and multi-axis strain measurement. Material anisotropy is characterized by extracting the

  13. 3D Viscoelastic Finite Element Modelling of Polymer Flow in the Fiber Drawing Process for Microstructured Polymer Optical Fiber Fabrication

    DEFF Research Database (Denmark)

    Fasano, Andrea; Rasmussen, Henrik K.; Marín, J. M. R.

    2015-01-01

    The process of drawing an optical fiber from a polymer preform is still not completely understood,although it represents one of the most critical steps in the process chain for the fabrication of microstructuredpolymer optical fibers (mPOFs). Here we present a new approach for the numerical...... modelling of the fiber drawingprocess using a fully three-dimensional and time-dependent finite element method, giving significant insightinto this widely spread mPOF production technique. Our computational predictions are physically based on theviscoelastic fluid dynamics of polymers. Until now...

  14. Investigation of different cage designs and mechano-regulation algorithms in the lumbar interbody fusion process - a finite element analysis.

    Science.gov (United States)

    Postigo, Sergio; Schmidt, Hendrik; Rohlmann, Antonius; Putzier, Michael; Simón, Antonio; Duda, Georg; Checa, Sara

    2014-04-11

    Lumbar interbody fusion cages are commonly used to treat painful spinal degeneration and instability by achieving bony fusion. Many different cage designs exist, however the effect of cage morphology and material properties on the fusion process remains largely unknown. This finite element model study aims to investigate the influence of different cage designs on bone fusion using two mechano-regulation algorithms of tissue formation. It could be observed that different cages play a distinct key role in the mechanical conditions within the fusion region and therefore regulate the time course of the fusion process. Copyright © 2014 Elsevier Ltd. All rights reserved.

  15. Poisson-Nernst-Planck Equations for Simulating Biomolecular Diffusion-Reaction Processes I: Finite Element Solutions.

    Science.gov (United States)

    Lu, Benzhuo; Holst, Michael J; McCammon, J Andrew; Zhou, Y C

    2010-09-20

    In this paper we developed accurate finite element methods for solving 3-D Poisson-Nernst-Planck (PNP) equations with singular permanent charges for electrodiffusion in solvated biomolecular systems. The electrostatic Poisson equation was defined in the biomolecules and in the solvent, while the Nernst-Planck equation was defined only in the solvent. We applied a stable regularization scheme to remove the singular component of the electrostatic potential induced by the permanent charges inside biomolecules, and formulated regular, well-posed PNP equations. An inexact-Newton method was used to solve the coupled nonlinear elliptic equations for the steady problems; while an Adams-Bashforth-Crank-Nicolson method was devised for time integration for the unsteady electrodiffusion. We numerically investigated the conditioning of the stiffness matrices for the finite element approximations of the two formulations of the Nernst-Planck equation, and theoretically proved that the transformed formulation is always associated with an ill-conditioned stiffness matrix. We also studied the electroneutrality of the solution and its relation with the boundary conditions on the molecular surface, and concluded that a large net charge concentration is always present near the molecular surface due to the presence of multiple species of charged particles in the solution. The numerical methods are shown to be accurate and stable by various test problems, and are applicable to real large-scale biophysical electrodiffusion problems.

  16. Leaching of valuable elements from thermal power plant bottom ash using a thermo-hydrometallurgical process.

    Science.gov (United States)

    Bojinova, Darinka; Teodosieva, Ralitsa

    2016-06-01

    The solid industrial wastes generated from thermal power plants (TPPs) can be considered as renewable secondary sources for recovery of valuable metals. This study presents the results from investigations that integrated a thermo-hydro-metallurgical method for treatment of bottom ash obtained from the Enel Maritsa East 3 TPP in Bulgaria. Leaching was performed with 20, 30 and 40 wt% sulphuric acid, respectively, in an autoclave at 100(o)C, 120(o)C and 140(o)C for 120, 240, 360 and 480 min, at a constant value of the liquid/solid ratio. After autoclaving, the samples (suspensions) were diluted with a constant value of water and stirring at 50(o)C for 60 min. On the basis of the experimental data the leaching efficiency (α) of the elements in the liquid phase after filtration was estimated. The leaching of aluminium increases significantly with increasing of the temperature, reaching the maximum value of 70 wt%. The highest leaching efficiency values for the other elements are as follows: Fe (86.4%), Ca (86.6%), Na (86.6%), Ni (83.3%) and Zn (83.3%). The maximum value of leaching for Mg, K, Mn, Cu and Cr is in the interval of 46-70%. © The Author(s) 2016.

  17. Finite Element Modeling of Thermo Creep Processes Using Runge-Kutta Method

    Directory of Open Access Journals (Sweden)

    Yu. I. Dimitrienko

    2015-01-01

    Full Text Available Thermo creep deformations for most heat-resistant alloys, as a rule, nonlinearly depend on stresses and are practically non- reversible. Therefore, to calculate the properties of these materials the theory of plastic flow is most widely used. Finite-element computations of a stress-strain state of structures with account of thermo creep deformations up to now are performed using main commercial software, including ANSYS package. However, in most cases to solve nonlinear creep equations, one should apply explicit or implicit methods based on the Euler method of approximation of time-derivatives. The Euler method is sufficiently efficient in terms of random access memory in computations, however this method is cumbersome in computation time and does not always provide a required accuracy for creep deformation computations.The paper offers a finite-element algorithm to solve a three-dimensional problem of thermo creep based on the Runge-Kutta finite-difference schemes of different orders with respect to time. It shows a numerical test example to solve the problem on the thermo creep of a beam under tensile loading. The computed results demonstrate that using the Runge-Kutta method with increasing accuracy order allows us to obtain a more accurate solution (with increasing accuracy order by 1 a relative error decreases, approximately, by an order too. The developed algorithm proves to be efficient enough and can be recommended for solving the more complicated problems of thermo creep of structures.

  18. 3D finite element analysis of tightening process of bolt and nut connections with pitch difference

    Science.gov (United States)

    Liu, X.; Noda, N.-A.; Sano, Y.; Huang, Y. T.; Takase, Y.

    2018-06-01

    In a wide industrial field, the bolt-nut joint is unitized as an important machine element and anti-loosening performance is always required. In this paper, the effect of a slight pitch difference between a bolt and nut is studied. Firstly, by varying the pitch difference, the prevailing torque required for the nut rotation, before the nut touches the clamped body, is measured experimentally. Secondly, the tightening torque is determined as a function of the axial force of the bolt after the nut touches the clamped body. The results show that a large value of pitch difference may provide large prevailing torque that causes an anti-loosening effect although a very large pitch difference may deteriorate the bolt axial force under a certain tightening torque. Thirdly, a suitable pitch difference is determined taking into account the anti-loosening and clamping abilities. Furthermore, the chamfered corners at nut ends are considered, and it is found that the 3D finite element analysis with considering the chamfered nut threads has a good agreement with the experimental observation. Finally, the most desirable pitch difference required for improving anti-loosening is proposed.

  19. Peer support for parents of disabled children part 2: how organizational and process factors influenced shared experience in a one-to-one service, a qualitative study.

    Science.gov (United States)

    Shilling, V; Bailey, S; Logan, S; Morris, C

    2015-07-01

    Parents of disabled children often seek support from their peers. The shared experience between parents appears to be a crucial mediating factor. Understanding how a sense of shared experience is fostered can help to design and evaluate services that seek to provide peer support. We carried out a qualitative study involving semi-structured interviews and focus groups. Participants were 12 parents and 23 befrienders who had contact with the Face2Face one-to-one befriending service in Devon and Cornwall during a 12-month period, and 10 professionals from health, social care and education. Formal structures and processes in place such as training and ongoing supervision and support were highly valued as was the highly personalized, confidential, flexible, one-to-one at-home nature of the service. Crucial to establishing rapport was putting the right people together and ensuring a good match between befrienders and parents. Clearly, the befriending parent has to be emotionally prepared to provide help. However, if the parent being offered support was not ready to accept help at the time it was offered or the type of support was not right for them, they are less likely to engage with the service. Organizational and process factors as well as characteristics of the parents offering and receiving support contribute to the sense of shared experience in one-to-one peer support. These factors interact to influence whether peer support is effective and should be explicitly considered when designing and evaluating services. © 2015 John Wiley & Sons Ltd.

  20. Gaining insights into interrill soil erosion processes using rare earth element tracers

    Science.gov (United States)

    Increasing interest in developing process-based erosion models requires better understanding of the relationships among soil detachment, transportation, and deposition. The objectives are to 1) identify the limiting process between soil detachment and sediment transport for interrill erosion, 2) und...

  1. Flow Dynamics of green sand in the DISAMATIC moulding process using Discrete element method (DEM)

    DEFF Research Database (Denmark)

    Hovad, Emil; Larsen, P.; Walther, Jens Honore

    2015-01-01

    casting process. Depending on the actual casting geometry the mould can be geometrically quite complex involving e.g. shadowing effects and this is directly reflected in the sand flow during the moulding process. In the present work a mould chamber with “ribs” at the walls is chosen as a baseline geometry...

  2. 3D Finite Element Modelling of Drilling Process of Al2024-T3 Alloy with solid tooling and Experimental Validation

    DEFF Research Database (Denmark)

    Davoudinejad, Ali; Tosello, Guido

    2017-01-01

    Drilling is an indispensable process for many manufacturing industries due to the importance of the process for assembling components. This study presents a 3D finite element modeling (3D FEM) approach for drilling process of aluminum 2024-T3. The 3D model of tool for two facet HSSCo and four facet...... area were determined numerically. The results confirm the ability and advantage of 3D FE model of the drilling process....... HSS were generated base on the details geometry. The simulations were carried out for both drills in different cutting conditions. The numerically obtained thrust forces were compared against experimental results. The tool stress distribution, chip formation and temperature distribution in the chip...

  3. Development of the manufacture and process for DUPIC fuel elements; development of the quality evaluation techniques for end cap welds of DUPIC fuel elements

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Sang Tae; Choi, Myong Seon; Yang, Hyun Tae; Kim, Dong Gyun; Park, Jin Seok; Kim, Jin Ho [Yeungnam University, Kyongsan (Korea)

    2002-04-01

    The objective of this research is to set up the quality evaluation techniques for end cap welds of DUPIC fuel element. High temperature corrosion test and the SCC test for Zircaloy-4 were performed, and also the possibility of the ultrasonic test technique was verified for the quality evaluation and control of the laser welds in the DUPIC fuel rod end cap. From the evaluation of corrosion properties with measuring the weight gain and observing oxide film of the specimen that had been in the circumstance of steam(400 .deg. C, 1,500 psi) by max. 70 days later, the weight gain of the welded specimens was larger than original tube and the weight increasing rate increased with the exposed days. For the Development of techniques for ultrasonic test, semi-auto ultrasonic test system has been made based on immersion pulse-echo technique using spherically concentrated ultrasonic beam. Subsequently, developed ultrasonic test technique is quite sensible to shape of welds in the inside and outside of tube as well as crack, undercut and expulsion, and also this ultrasonic test, together with metallurgical fracture test, has good reliance as enough to be used for control method of welding process. 43 refs., 47 figs., 8 tabs. (Author)

  4. The Impact of Parental Involvement on a Structured Youth Program Experience: A Qualitative Inquiry

    Directory of Open Access Journals (Sweden)

    Mat D. Duerden

    2013-12-01

    Full Text Available Parental involvement is an often proposed, but rarely researched, key element of youth programs. Questions remain regarding the impact of parental involvement on program processes and outcomes. Qualitative data were collected over a one-year period with youth participants (n=46, parents (n=26, and teachers (n=5 associated with an international immersion/service learning program for adolescents. Three main research questions guided the data analysis: (1 what role does parental involvement play in the youths’ experience in the program; (2 how does parental involvement in the program influence the parent/child relationship; and (3 what role does parental involvement play in terms of the program’s long-term impact on the youth participants? Findings suggest a relationship between parental involvement in youth programs and improved parent/child communication, bonding, and perceptions of one another. Findings also suggest that having a common ground experience prolonged the experience’s positive post-participation effects.

  5. Using laser-induced breakdown spectroscopy on vacuum alloys-production process for elements concentration analysis

    Science.gov (United States)

    Zhao, Tianzhuo; Fan, Zhongwei; Lian, Fuqiang; Liu, Yang; Lin, Weiran; Mo, Zeqiang; Nie, Shuzhen; Wang, Pu; Xiao, Hong; Li, Xin; Zhong, Qixiu; Zhang, Hongbo

    2017-11-01

    Laser-induced breakdown spectroscopy (LIBS) utilizing an echelle spectrograph-ICCD system is employed for on-line analysis of elements concentration in a vacuum induction melting workshop. Active temperature stabilization of echelle spectrometer is implemented specially for industrial environment applications. The measurement precision is further improved by monitoring laser parameters, such as pulse energy, spatial and temporal profiles, in real time, and post-selecting laser pulses with specific pulse energies. Experimental results show that major components of nickel-based alloys are stable, and can be well detected. By using internal standard method, calibration curves for chromium and aluminum are obtained for quantitative determination, with determination coefficient (relative standard deviation) to be 0.9559 (< 2.2%) and 0.9723 (< 2.8%), respectively.

  6. AVACOM-ETAP, Availability and Element Transient and Asymptotic Repair Process

    International Nuclear Information System (INIS)

    Reina, G.

    1987-01-01

    1 - Description of program or function: In reliability theory, the term 'availability' generally indicates the probability of the proper functioning of a system or of a component at a general time t when various possible replacement or repair policies are considered. AVACOM-ETARP calculates the transient and asymptotic availability of a component subject to a repair process with generic failure and repair laws. Five of the most commonly used distributions have been included as options: exponential, normal; lognormal; gamma; Weibull. 2 - Method of solution: The used mathematical model considers the failure-restoration process as a 2-state non-homogeneous Markov process containing the homogeneous Markov one as a particular case

  7. Finite element analysis and optimization of process parameters during stamp forming of composite materials

    International Nuclear Information System (INIS)

    Venkatesan, S; Kalyanasundaram, S

    2010-01-01

    In the manufacture of parts for high performance structures using composite materials, the quality and robustness of the parts is of utmost importance. The quality of the produced parts depends largely on the process parameters and manufacturing methodologies. This study presents the use of a temperature dependant orthotropic material for a coupled structural-thermal analysis of the stamp forming process. The study investigated the effects of process parameters such as pre-heat temperature, blank holder force and process time on the formability of composite materials. Temperature was found to be the dominant factor governing the formability of the composite material while higher blank holder forces were deemed to be important for achieving high quality of the parts manufactured. Finally, an optimum set of parameters was used to compare the simulations with experimental results using an optical strain measurement system.

  8. Bomb reduction of uranium tetrafluoride. Part II: Influence of the addition elements in the reduction process

    International Nuclear Information System (INIS)

    Anca Abati, R.; Lopez Rodriguez, M.

    1962-01-01

    This work shows the influence of uranium oxide and uranyl fluoride in the reduction of uranium with Ca and Mg. These additions are more harmful when using smaller bombs. The uranyl fluoride has influence in the reduction process; the curves yield-concentration shows two regions depending upon the salt concentration. The behaviour of this addition in these regions can be explained following the different decompositions that can take place during the reduction process. (Author) 9 refs

  9. Influence of trace elements on the activity of some microbiological processes in soil

    Energy Technology Data Exchange (ETDEWEB)

    Maliszewska, W

    1972-01-01

    It was found that N fixation was stimulated by B, Zn, Mo and Co. Fe and Cu had an evident inhibiting and Cd even toxic influence on this process. Zn and Fe stimulated proteolase activity. Mo showed almost no effect on that process. The other microelements used had a more or less inhibiting influence. Ammonification was affected with B and Mo. The other treatments had different hampering effects on that process. The nitrifyers were mostly stimulated by Fe and Al. The other microelements B, Zn, Mo and Mn, stimulated the development of nitifyers, but to a lesser degree. Cu and Cd were toxic. The highest intensity of denitrification was found without any microelement addition. The most distinct inhibition of the process was caused by Cu, Zn, and Co. Hemicellulose decomposition activity was very sensitive to a deficiency of microelements investigated. Only Zn and Mo inhibited this process. In general Cu and Cd showed the most inhibiting effect on all the biological processes investigated in the experiments. The highest stimulatory effect in all experiments was caused by B and Mo. 5 references, 4 figures, 1 table.

  10. Key elements of successful care process of patients with heart symptoms in an emergency care - could an ERP system help?

    Science.gov (United States)

    Kontio, Elina; Korvenranta, Heikki; Lundgren-Laine, Heljä; Salanterä, Sanna

    2009-01-01

    The aim of the study was to identify key elements of successful care process of patients with heart symptoms from the nursing management viewpoint in an emergency care. Through these descriptions, we aimed at identifying possibilities for using enterprise resource planning (ERP) systems to support decision making in emergency care. Hospitals are increasingly moving to process-based workings and at the same time new information system in healthcare are developed and therefore it is essential to understand the strengths and weaknesses of current processes better. A qualitative descriptive design using critical incident technique was employed. Critical Incidents were collected with an open-ended questionnaire. The sample (n=50), 13 head nurses and 37 registered nurses, was purposeful selected from three acute hospitals in southern Finland. The process of patients with heart symptoms in emergency care was described. We identified three competence categories where special focus should be placed to achieve successful process of patients with heart symptoms: process-oriented competencies, personal/management competencies and logistics oriented competencies. Improvement of decision making requires that the care processes are defined and modeled. The research showed that there are several happenings in emergency care where an ERP system could help and support decision making. These happenings can be categorized in two groups: 1) administrative related happenings and 2) patient processes related happenings.

  11. Introduction to the special section: Mind and matter: New insights on the role of parental cognitive and neurobiological functioning in process models of parenting.

    Science.gov (United States)

    Deater-Deckard, Kirby; Sturge-Apple, Melissa L

    2017-02-01

    This is an introduction to the special section on neurobiological and neurocognitive factors in parenting. The collection of 11 papers are published in 2 serial subsections of consecutive issues of the journal. The science they present captures the leading edge of work examining the interface of cognitive, emotional, behavioral, and physiological self-regulation in parenting and how these operate to protect or increment risk for poorer parenting among families who face chronic stressors (e.g., poverty, single parenthood, homelessness, mood disorders). Samples span the poor to the affluent, many ethnicities, several nationalities, and a wide variety of geographic locations. The studies also are diverse in the methods employed, spanning behavioral and questionnaire indicators of executive function and effortful control, attentional and social-cognitive biases, and psychophysiology. Taken together, the papers present clear and compelling evidence for the crucial role of parental neurobiological and neurocognitive deficits and strengths in the etiology of distressed and resilient parenting. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

  12. Behaviour of elements in soils developed from nephelinites at Mount Etinde (Cameroon): Impact of hydrothermal versus weathering processes

    Science.gov (United States)

    Etame, J.; Gerard, M.; Bilong, P.; Suh, C. E.

    2009-05-01

    The progressive weathering of 0.65 Ma nephelinites from Mount Etinde (South Western Cameroon) in a humid tropical setting has resulted in the formation of a 150 cm thick weathering crust. The soil profiles consist of three horizons: Ah/Bw/C. A major differentiation of the chemical and mineralogical parameters is related to the complexity of the saprolites, some of which were hydrothermally altered. Bulk geochemical and microgeochemical analyses were performed on selected minerals from the different horizons of two reference profiles, of which one (E 4) was developed from unaltered nephelinite (nephelinite U) while the other (BO 1) formed from hydrothermally altered nephelinite (nephelinite H). The results show that the primary minerals (clinopyroxene, nepheline, leucite, haüyne, titanomagnetite, perovskite, apatite and sphene) experienced differential weathering rates with primary minerals rich in rare earth elements (titanomagnetite, perovskite, apatite and sphene) surviving in the saprolite and the Bw horizons. The weathering of the primary minerals is reflected in the leaching of alkaline and alkaline-earth elements, except for Ba and Rb in the hydrothermalised nephelinite soil. The order of mobility is influenced by hydrothermal processes: Na > K > Rb > Ca > Cs > Sr in nephelinite U soil , Na > K > Sr > Ca > Mg in nephelinite H soil; Rb/Sr and Sr/Mg can be used as indicators of the kinetic of the weathering on nephelinite U and on nephelinite H. Barium enrichment is related to variable concentrations in the nephelinites, to the formation of crandallites and the leaching of surface horizons. The content of metallic elements is higher in nephelinite H soil than in the nephelinite U soil. Results show that hydrothermal alteration leads to an enrichment of light (La, Ce, Nd) and intermediate (Sm, Eu, Dy) rare earth elements. The enrichment in Cr and Pb in the surface horizons is discussed in relation to organic matter activity, the dissolution of magnetites, and

  13. Completing the surrogate motherhood process: parental order reporters' attitudes towards surrogacy arrangements, role ambiguity and role conflict.

    Science.gov (United States)

    Purewal, Satvinder; Crawshaw, Marilyn; van den Akker, Olga

    2012-06-01

    This study investigated the attitudes of parental order reporters (PORs) towards their work with surrogacy arrangements and their experiences of role conflict and role ambiguity. A questionnaire was used to assess PORs' perceptions of their role in parental order [PO] applications, attitudes towards surrogacy arrangements and the legal process and the influence of role ambiguity or conflict. Questionnaires were distributed to all PORs employed by the Children and Family Court Advisory and Support Service in England. Thirty-three PORs participated (response rate 46%) who, on average, had each completed five PO applications (range 1-40). Positive attitudes towards surrogacy and the child's needs for openness about origins were found. Concerns about the inadequacy of preparation and assessment arrangements, overseas arrangements and non-regulation of surrogacy agencies were evident. PORs with high-role ambiguity were more likely to report less positive attitudes towards the emotional consequence of surrogacy on offspring. High scores on role ambiguity and role conflict were reflected in less positive attitudes towards the parties' preparation towards parenthood. These results have implications for training, policy and practice in this area.

  14. Multimethod prediction of physical parent-child aggression risk in expectant mothers and fathers with Social Information Processing theory.

    Science.gov (United States)

    Rodriguez, Christina M; Smith, Tamika L; Silvia, Paul J

    2016-01-01

    The Social Information Processing (SIP) model postulates that parents undergo a series of stages in implementing physical discipline that can escalate into physical child abuse. The current study utilized a multimethod approach to investigate whether SIP factors can predict risk of parent-child aggression (PCA) in a diverse sample of expectant mothers and fathers. SIP factors of PCA attitudes, negative child attributions, reactivity, and empathy were considered as potential predictors of PCA risk; additionally, analyses considered whether personal history of PCA predicted participants' own PCA risk through its influence on their attitudes and attributions. Findings indicate that, for both mothers and fathers, history influenced attitudes but not attributions in predicting PCA risk, and attitudes and attributions predicted PCA risk; empathy and reactivity predicted negative child attributions for expectant mothers, but only reactivity significantly predicted attributions for expectant fathers. Path models for expectant mothers and fathers were remarkably similar. Overall, the findings provide support for major aspects of the SIP model. Continued work is needed in studying the progression of these factors across time for both mothers and fathers as well as the inclusion of other relevant ecological factors to the SIP model. Copyright © 2015 Elsevier Ltd. All rights reserved.

  15. The role of social and cognitive processes in the relationship between fear network and psychological distress among parents of children undergoing hematopoietic stem cell transplantation.

    Science.gov (United States)

    Virtue, Shannon Myers; Manne, Sharon; Mee, Laura; Bartell, Abraham; Sands, Stephen; Ohman-Strickland, Pamela; Gajda, Tina Marie

    2014-09-01

    The current study examined whether cognitive and social processing variables mediated the relationship between fear network and depression among parents of children undergoing hematopoietic stem cell transplant (HSCT). Parents whose children were initiating HSCT (N = 179) completed survey measures including fear network, Beck Depression Inventory, cognitive processing variables (positive reappraisal and self-blame) and social processing variables (emotional support and holding back from sharing concerns). Fear network was positively correlated with depression (p fear network and depression. Together they accounted for 34.3% of the variance in the relationship between fear network and depression. Positive reappraisal and emotional support did not have significant mediating effects. Social and cognitive processes, specifically self-blame and holding back from sharing concerns, play a negative role in parents' psychological adaptation to fears surrounding a child's HSCT.

  16. The Examination of Views of Parents about the Web-Based Performance Evaluation Program in the Science Teaching Process

    OpenAIRE

    Bakırcı, Hasan; KARA, YILMAZ; ÇEPNİ, Salih

    2018-01-01

    The research was aimed to reveal the views of parents on web-based performance evaluation program. The case study method adopted for this study. The research was conducted in the central district of Trabzon province during the fall semester of 2012-2013 academic years. A questionnaire was administered to three hundred parents and face-to-face interviews were conducted with 10 of those parents. The obtained data was analyzed through descriptive and content analysis. Majority of the parents wer...

  17. Separation of actinide elements by solvent extraction using centrifugal contactors in the NEXT process

    International Nuclear Information System (INIS)

    Nakahara, Masaumi; Sano, Yuichi; Koma, Yoshikazu; Kamiya, Masayoshi; Shibata, Atsuhiro; Koizumi, Tsutomu; Koyama, Tomozo

    2007-01-01

    Using the advanced aqueous reprocessing system named NEXT process, actinides recovery was attempted by both a simplified solvent extraction process using TBP as an extractant for U, Pu and Np co-recovery and the SETFICS process for Am and Cm recovery from the raffinate. In U, Pu and Np co-recovery experiments a single cycle flow sheet was used under high nitric acid concentration in the feed solution or scrubbing solution. High nitric acid concentration in the feed solution aided Np oxidation not only in the feed solution, but also at the extraction section. This oxidation reaction accomplished Np extraction by TBP with U and Pu. Most of Np could be recovered into the product solution. In the SETFICS process, a TRUEX solvent of 0.2 mol/dm 3 CMPO and 1.4 mol/dm 3 TBP in n-dodecane was employed instead of 0.2 mol/dm 3 CMPO and 1.0 mol/dm 3 TBP in n-dodecane in order to increase the loading of metals. Instead of sodium nitrate, hydroxylamine nitrate was applied to this experimental flow sheet in accordance with a 'salt-free' concept. The counter current experiment succeeded with the Am and Cm product. On the high-loading flow sheet, compared with the previous flow sheet, the flow of the aqueous effluents and spent solvent were expected to decrease by about one half. Two solvent extraction experiments for actinides recovery demonstrated the utility of the flow sheet of these processes in the NEXT process. (author)

  18. Impact of Measuring Part Elements of Transformer Differential Protection on Input Signal Processing

    Directory of Open Access Journals (Sweden)

    Andreev M.V

    2017-08-01

    Full Text Available The electric power system (EPS is a large, multi-parameter, non-linear and dynamic system. The problem of calculation of relay protection (RP settings has become more urgent nowadays. The situation is exacerbated by the active implementation of renewable energy sources, FACTS, etc., which significantly change the “traditional” EPS and their operating modes. The problem can be solved by deep analysis of functioning of main elements of RP devices in the specific operating conditions and revision of coefficients used in settings calculation. That can be done using RPs detailed mathematical models and modern EPS simulators. The results of the analysis will make it possible to formulate a new methodology for setting up RP. That is a final goal. In the framework of solving this problem, the novel approach for developing RPs’ detailed mathematical models is formulated and theoretically proved. On the basis of this approach, mathematical models of the system “instrumental transformer - auxiliary transformer - analog filter” (measuring part of digital transformer differential protection for different types of auxiliary current transformers (active and passive and filters (Butterworth, Chebyshev, Bessel are developed. A comparative numerical analysis of their frequency and phase responses is carried out, including taking into account the magnetization of instrumental current transformers. Summarizing, the theoretical and practical studies presented in the article allows formulating requirements for RPs’ detailed mathematical models, which will be used in the further research.

  19. Geochemistry of radioactive elements in the process of weathering of carbonatites, acidic and alkali rocks

    International Nuclear Information System (INIS)

    Zhmodik, S.M.

    1984-01-01

    Geochemical peculiarities of uranium and thorium behaviour under formation of area crusts of weathering of granitoids, alkali rocks and carbonatites of certain areas of East Siberia are considered. The presented crysts of weathering have been formed under different climatic conditions, they have different age (in the limit of upper Cretaceous period - Neogene up to Quaternary time), chemical and mineral composition. Factors determining and controlling the level of uranium and thorium concentrations in weathering products are disclosed on the basis of facts using the methods of neutron-fragmentary radiography and by-fractional balances. Uranium and thorium distribution in granulometric fractions of crysts of weathering is considered in detail. Data on change in forms of radioactive elements under weathering, effect of fine-dispersed hypergene minerals (kaolinite, montmorillonite, goethite, etc.) on the character of uranium and thorium distribution in eluvial products as well as on sources of migrating uranium in crusts of weathering are presented. Scales of uranium and thorium redistribution under weathering are revealed. Supposition on the source of uranium and throium in sediments is made

  20. Estimation of suppliers as an important element of the rationalization of supply processes – case study

    Directory of Open Access Journals (Sweden)

    2011-06-01

    Full Text Available To increase the efficiency of the business in times of the globalization and increasing competition, the management of the companies looks for opportunities to achieve higher incomes or to reduce the costs of inputs. One of possible methods to obtain higher efficiency is to put the emphasize on the relationships with suppliers. This is very important element of an effective management of the company, because by determining the economical conditions of the cooperation, it is possibly to reduce the cost of business activities. The reliable classification of the suppliers is depended on the level of the detail of an assessment criteria and the scoring method. The main problem is the risk of the objective estimation of individual offers received from the suppliers. For this reason, the classification of suppliers is one of the key problems of the logistics controlling. Based on practical example, this paper presents the complexity of the problem of the classifications and the selection of suppliers according to different hierarchy of the importance of various criteria.

  1. Novel Extraction Process Of Rare Earth Elements From NdFeB Powders Via Alkaline Treatment

    Directory of Open Access Journals (Sweden)

    Chung K.W.

    2015-06-01

    Full Text Available The alkaline treatment of NdFeB powders in NaOH solution at various equivalent amounts of NaOH at 100°C was performed. The resultant powders were then leached in 0.5M H2SO4 solution at 25°C for 2 minutes. At 5 equivalents of NaOH, neodymium in NdFeB powders was partially transformed to neodymium hydroxide. The transformation of neodymium to neodymium hydroxide actually occurred at 10 equivalents of NaOH and was facilitated by increasing the equivalent of NaOH from 10 to 30. In addition, iron was partially transformed to magnetite during the alkaline treatment, which was also promoted at a higher equivalent of NaOH. The leaching yield of neodymium from alkaline-treated powders was increased with an increasing equivalent of NaOH up to 10; however, it slightly decreased with the equivalent NaOH of over 10. The leaching yield of iron was inversely proportional to that of rare earth elements. NdFeB powders treated at 10 equivalents of NaOH showed a maximum leaching yield of neodymium and dysprosium of 91.6% and 94.6%, respectively, and the lowest leaching yield of iron of 24.2%, resulting in the highest selective leaching efficiency of 69.4%.

  2. Simulating the DISAMATIC process using the discrete element method — a dynamical study of granular flow

    DEFF Research Database (Denmark)

    Hovad, Emil; Spangenberg, Jon; Larsen, P.

    2016-01-01

    . The DEM parameters describing the static friction coefficients are obtained using a ring shear tester and the rolling resistance and cohesion value is subsequently calibrated with a sand pile experiment. The calibrated DEM model is used to model the sand shot in the DISAMATIC process for three different...

  3. Evolution of r-process elements in the hot supernova bubble

    International Nuclear Information System (INIS)

    Mathews, G.J.; Wilson, J.R.; Woosley, S.E.

    1993-02-01

    We review some of the recent arguments as to why the r-process is thought to be associated with supernovae and how the high-temperature, high-entropy inner region of a core-collapse supernova is an ideal r-process site. We present preliminary extensions of our earlier work on the formation of the high-entropy ''bubble'' that describe more accurately its late-time evolution and the ejection of the neutrino-energized wind from the surface of the nascent neutron star. This site leads naturally to a distribution of temperature, density, neutron excess, and entropy for material ejected at different times in the wind as required by Solar abundances. We present simple analytic expressions which approximate these distributions. This site also predicts an amount of reprocess material ejected per event in agreement with simple galactic evolution arguments. However, it is not yet clear whether the entropy in this model is high enough (or the electron fraction is low enough) to produce an optimum fit to the Solar r-process abundance curve and additional mechanisms may be required to increase the entropy per baryon. We conclude with a discussion of nuclear measurements which would help to probe this r-process environment

  4. Integrating Literature with Craft in a Learning Process with Creative Elements

    Science.gov (United States)

    Aerila, Juli-Anna; Rönkkö, Marja-Leena

    2015-01-01

    Art-related learning should be the central way of doing and playing in preschool, because the high quality of art-related education has a positive effect on children's well-being, identity development, and creative thinking. In our study we tested an integrated learning process where reading literature and telling stories is combined with the…

  5. On The Cusp of the New Spatial Challenges - The Thermal Waste Processing Plant as an Element of Urban Space

    Science.gov (United States)

    Wójtowicz-Wróbel, Agnieszka

    2017-10-01

    The goal of this paper is to answer the question about the current importance of structures associated with the thermal processing of waste within the space of Polish cities and what status can they have in the functional and spatial structure of Polish cities in the future. The construction of thermal waste processing plants in Poland is currently a new and important problem, with numerous structures of this type being built due to increasing care for the natural environment, with the introduction of legal regulations, as well as due to the possibility of obtaining large external funding for the purposes of undertaking pro-environmental spatial initiatives, etc. For this reason, the paper contains research on the increase in the number of thermal waste processing plants in Poland in recent years. The abovementioned data was compared with similar information from other European Union member states. In the group containing Polish thermal waste processing plants, research was performed regarding the stage of the construction of a plant (operating plant, plant under construction, design in a construction phase, etc.). The paper also contains a listing of the functions other than the basic form of use, which is the incineration of waste - similarly to numerous foreign examples - that the environmentally friendly waste incineration plants fulfil in Poland, dividing the additional forms of use into "hard" elements (at the design level, requiring the expansion of a building featuring new elements that are not directly associated with the basic purpose of waste processing) and soft (social, educational, promotional actions, as well as other endeavours that require human involvement, but that do not entail significant design work on the buildings itself, expanding its form of use, etc.) as well as mixed activity, which required design work, but on a relatively small scale. Research was also conducted regarding the placement of thermal waste processing plants within the

  6. Process for the production of fuel combined articles for addition in block shaped high temperature fuel elements

    International Nuclear Information System (INIS)

    Hrovat, M.; Rachor, L.

    1976-01-01

    There is provided a process for the production of fuel compacts consisting of an isotropic, radiation-resistant graphite matrix of good heat conductivity having embedded therein coated fuel and/or fertile particles for insertion into high temperature fuel elements by providing the coated fuel and/or fertile particles with an overcoat of molding mixture consisting of graphite powder and a thermoplastic resin binder. The particles after the overcoating are provided with hardener and lubricant only on the surface and subsequently are compressed in a die heated to a constant temperature of about 150 0 C, hardened and discharged therefrom as finished compacts

  7. Behaviour of actinide elements in the lithium reduction process. 1. Feasibility of the Li reduction process to UO2 and PuO2

    International Nuclear Information System (INIS)

    Usami, Tuyoshi; Kurata, Masateru; Yuda, Ryoichi; Kato, Tetsuya; Inoue, Tadashi; Sims, Howard; Jenkins, Jon

    2000-01-01

    Lithium reduction process has been developed to apply pyrochemical recycle process for oxide fuels. This process uses lithium metal as a reductant to convert oxides of actinide elements to metal. Lithium oxide generated in the reduction is to be dissolved in a molten lithium chloride bath to enhance reduction. The authors have measured the solubility of lithium oxide in lithium chloride, and then reduced uranium dioxide and plutonium dioxide. The solubility measured at 923 K was 8.8 wt.%. The uranium dioxide was completely reduced with no intermediate products and formed porous metal. Plutonium dioxide including 3% of americium dioxide was also reduced completely and formed molten metal. Even lithium oxide was just under saturation , plutonium could be reduced to metal. Shown from this result was easier reduction than predicted from thermodynamic data. Americium dioxide was also reduced at 1.8 wt% lithium oxide, but was not reduced at 8.8 wt.%. (author)

  8. Enrichment of r-Process Elements by Neutron Star Mergers through the Sub-Halo Clustering

    Science.gov (United States)

    Ishimaru, Yuhri; Ojima, Takuya; Wanajo, Shinya; Prantzos, Nikos

    Neutron star mergers (NSMs) are suggested to be the most plausible site of r-process by nucleosynthesis studies, while previous chemical evolution models pointed out that the long lifetimes of NS binaries are in conflict with the observed [r/Fe] of the Galactic halo stars. We attempt to solve this problem, assuming the Galactic halo was formed from merging sub-halos. We find that [r/Fe] start increasing at [Fe/H] < -3, if the star formation efficiencies are smaller for less massive sub-halos. We also show that small numbers of NSMs for least massive sub-halos could cause the large enhancement of [r/Fe]. Our results support NSMs as the major site of r-process.

  9. Process and devices of detection of hard electromagnetic or particle radiations using a superconducting element

    International Nuclear Information System (INIS)

    Drukier, A.K.; Valette, Claude; Waysand, Georges.

    1975-01-01

    The invention relates to processes and systems for the detection of hard electromagnetic or particle radiations and the sensors fitted to these systems. 'Hard radiations' means those whose energy is greater than a variable threshold, depending on the applications, but always more than 5 keV. The use of these sensors and the associated systems can therefore be envisaged in radiography and also in emission gammagraphy in the biological, anatomic and medical fields. In these processes, in order to detect a photon or a radiation particle, use is made of the transition phenomenon of a homogeneous grain of superconducting material of the first kind, from the metastable superconducting state to the normal state, under the effect of a photoelectron ejected by the impact of the photon or of the particle on the grain of superconducting material [fr

  10. THE RULE OF TRANSPARENCY: as an element of democratization in the journalism production process

    Directory of Open Access Journals (Sweden)

    Marta Regina Maia

    2008-12-01

    Full Text Available This article´s purpose is to discuss the need for improving theknowledge of readers, listeners, TV spectators and people whouse the Internet, mainly of the information process, focusing onthe communication media in Brazil. Among the possibilities, itis important to understand information production behind thescenes, which is possible with a Rule of Transparency, one of theintellectual principles of the science of reporting called “Disciplineof Verification” by journalists Bill Kovach and Tom Rosenstiel. The existence of a place that officially relates the making of, through books, blogs, or other means of communication, contributes to the democratization of the access to the process used by journalists who are most of the time unable to speak out and publish their ideas because of the editorial demands or even due to the lack of time and space.

  11. The rule of transparency: as an element of democratization in the journalism production process

    Directory of Open Access Journals (Sweden)

    Marta Regina Maia

    2008-12-01

    Full Text Available This article´s purpose is to discuss the need for improving the knowledge of readers, listeners, TV spectators and people who use the Internet, mainly of the information process, focusing on the communication media in Brazil. Among the possibilities, it is important to understand information production behind the scenes, which is possible with a Rule of Transparency, one of the intellectual principles of the science of reporting called “Discipline of Verification” by journalists Bill Kovach and Tom Rosenstiel. The existence of a place that officially relates the making of, through books, blogs, or other means of communication, contributes to the democratization of the access to the process used by journalists who are most of the time unable to speak out and publish their ideas because of the editorial demands or even due to the lack of time and space.

  12. Mathematical Modeling, Simulation and Optimization for Selected Robotic Processes related to Manufacturing of Unique Concrete Elements

    DEFF Research Database (Denmark)

    Cortsen, Jens

    Denne afhandling præsenterer vores arbejde i det danske projekt Unique Concrete Structures (Unikabeton) and EU projekt TailorMade Concrete Structures (TailorCrete) med at automatisere udvalgte processer for konstruktion af unike beton bygninger. Vi har primært fokus på robotfræsning af komplekse...... dobbeltkurvede armerings gitter med to samarbejdende robotter, hvor delprocesserne er bøjning, transportering og binding af ameringsstænger. Robotinstallationen er baseret på et off-line simuleringsprogram med dynamisk simulerings support for stangnedbøjning og samtidigt robot control for at reducere...... produktionstiden. De to mindre processer som varmetråd skæring af EPS blokke før fræsning og sprøjtning af slipmiddel på de færdige formwork blokke er også præsenteret efter de to hoved processer. Til sidst præsenterer vi en række af real life betonstrukturer baseret på vores arbejde i denne afhandling...

  13. Application of Finite Element Method to Analyze the Influences of Process Parameters on the Cut Surface in Fine Blanking Processes by Using Clearance-Dependent Critical Fracture Criteria

    Directory of Open Access Journals (Sweden)

    Phyo Wai Myint

    2018-04-01

    Full Text Available The correct choice of process parameters is important in predicting the cut surface and obtaining a fully-fine sheared surface in the fine blanking process. The researchers used the value of the critical fracture criterion obtained by long duration experiments to predict the conditions of cut surfaces in the fine blanking process. In this study, the clearance-dependent critical ductile fracture criteria obtained by the Cockcroft-Latham and Oyane criteria were used to reduce the time and cost of experiments to obtain the value of the critical fracture criterion. The Finite Element Method (FEM was applied to fine blanking processes to study the influences of process parameters such as the initial compression, the punch and die corner radii and the shape and size of the V-ring indenter on the length of the sheared surface. The effects of stress triaxiality and punch diameters on the cut surface produced by the fine blanking process are also discussed. The verified process parameters and tool geometry for obtaining a fully-fine sheared SPCC surface are described. The results showed that the accurate and stable prediction of ductile fracture initiation can be achieved using the Oyane criterion.

  14. Dyadic analysis of child and parent trait and state pain catastrophizing in the process of children's pain communication.

    Science.gov (United States)

    Birnie, Kathryn A; Chambers, Christine T; Chorney, Jill; Fernandez, Conrad V; McGrath, Patrick J

    2016-04-01

    When explored separately, child and parent catastrophic thoughts about child pain show robust negative relations with child pain. The objective of this study was to conduct a dyadic analysis to elucidate intrapersonal and interpersonal influences of child and parent pain catastrophizing on aspects of pain communication, including observed behaviours and perceptions of child pain. A community sample of 171 dyads including children aged 8 to 12 years (89 girls) and parents (135 mothers) rated pain catastrophizing (trait and state versions) and child pain intensity and unpleasantness following a cold pressor task. Child pain tolerance was also assessed. Parent-child interactions during the cold pressor task were coded for parent attending, nonattending, and other talk, and child symptom complaints and other talk. Data were analyzed using the actor-partner interdependence model and hierarchical multiple regressions. Children reporting higher state pain catastrophizing had greater symptom complaints regardless of level of parent state pain catastrophizing. Children reporting low state pain catastrophizing had similar high levels of symptom complaints, but only when parents reported high state pain catastrophizing. Higher child and parent state and/or trait pain catastrophizing predicted their own ratings of higher child pain intensity and unpleasantness, with child state pain catastrophizing additionally predicting parent ratings. Higher pain tolerance was predicted by older child age and lower child state pain catastrophizing. These newly identified interpersonal effects highlight the relevance of the social context to children's pain expressions and parent perceptions of child pain. Both child and parent pain catastrophizing warrant consideration when managing child pain.

  15. Parameter estimation and long-term process simulation of a biogas reactor operated under trace elements limitation

    International Nuclear Information System (INIS)

    Lübken, Manfred; Koch, Konrad; Gehring, Tito; Horn, Harald; Wichern, Marc

    2015-01-01

    Highlights: • Estimation of ADM1 parameter uncertainty by nonlinear, correlated parameter analysis. • Unbounded confidence regions were obtained for single hydrolysis rate constants. • ADM1 carbohydrates were divided into a slowly and readily degradable part. • Bioavailability of trace metals explained discrepancies between modeled and measured data. - Abstract: The Anaerobic Digestion Model No. 1 (ADM1) was modified to describe the long-term process stability of a two-stage agricultural biogas system operated for 494 days with a mono-substrate. The ADM1 model fraction for carbohydrates was divided into a slowly and readily degradable part. Significant different hydrolysis rate constants were found for proteins and single fractions of carbohydrates in batch experiments. Degradation of starch, xylan (hemicellulose), cellulose and zein (protein) were modeled with first order hydrolysis rate coefficients of 1.20 d −1 , 0.70 d −1 , 0.18 d −1 and 0.30 d −1 , respectively. While the hydrolysis rate coefficients found in batch experiments could be used for predicting continuous process data, the statistically calculated confidence regions (nonlinear parameter estimation) showed that the upper limits were unbounded. Single discrepancies between measured and modeled process data of the two-stage pilot system could be explained by the lack of bioavailability of trace elements. Addition of iron, as Fe(III)Cl 3 , allowed stable process conditions for an organic loading rate (OLR) up to 2.5 g VS L −1 d −1 . Additional supplement of trace elements was necessary for process operation at OLRs above 2.5 g VS L −1 d −1

  16. "Giving us hope": Parent and neonatal staff views and expectations of a planned family-centred discharge process (Train-to-Home).

    Science.gov (United States)

    Ingram, Jenny; Redshaw, Maggie; Manns, Sarah; Beasant, Lucy; Johnson, Debbie; Fleming, Peter; Pontin, David

    2017-08-01

    Preparing families and preterm infants for discharge is relatively unstructured in many UK neonatal units (NNUs). Family-centred neonatal care and discharge planning are recommended but variable. Qualitative interviews with 37 parents of infants in NNUs, and 18 nursing staff and 5 neonatal consultants explored their views of discharge planning and perceptions of a planned family-centred discharge process (Train-to-Home). Train-to-Home facilitates communication between staff and parents throughout the neonatal stay, using a laminated train and parent booklets. Parents were overwhelmingly positive about Train-to-Home. They described being given hope, feeling in control and having something visual to show their baby's progress. They reported positive involvement of fathers and families, how predicted discharge dates helped them prepare for home and ways staff engaged with Train-to-Home when communicating with them. Nursing staff reactions were mixed-some were uncertain about when to use it, but found the visual images powerful. Medical staff in all NNUs were positive about the intervention recognizing that it helped in communicating better with parents. Using a parent-centred approach to communication and informing parents about the needs and progress of their preterm infant in hospital is welcomed by parents and many staff. This approach meets the recommended prioritization of family-centred care for such families. Predicted discharge dates helped parents prepare for home, and the ways staff engaged with Train-to-Home when communicating with them helped them feel more confident as well as having something visual to show their baby's progress. © 2016 The Authors. Health Expectations Published by John Wiley & Sons Ltd.

  17. Evaluation of family-centred services from parents of Chinese children with cerebral palsy with the Measure of Processes of Care.

    Science.gov (United States)

    Wang, M; Petrini, M A; Guan, Q

    2015-05-01

    Family-centred service (FCS) has become essential to parents of children with cerebral palsy (CP) and professionals in Chinese paediatric rehabilitation services. FCS practice meets the unique needs of the child and family, through facilitation of optimal service provision delivered by professionals, and ensures service systems to be flexible, appropriate and actively responsive to the family needs. Parents used the Measure of Processes of Care 20 (MPOC-20) questionnaire to evaluate and verify the efficacy of use in China. The aims of the present study were twofold: to assess the validity and reliability of the Chinese MPOC-20, and investigate the range of parents' satisfaction with service provision in an FCS practice using the MPOC-20. The Chinese MPOC-20 was selected to assess parent satisfaction with service provision of professionals in FCS practice. Participants were parents of children under 8 years of age with CP, who had received rehabilitation services between May 2012 and May 2013, and were receiving rehabilitation services in May 2013 at a hospital outpatient department and a rehabilitation centre. The reliability and validity of the Chinese MPOC-20 were confirmed. Parents evaluated FCS practice with the MPOC-20 survey. Respectful and supportive care was rated with the highest score and providing general information the lowest. Parents according to the data were dissatisfied with the lack of information. Parents fairly evaluated service provision of professionals in FCS practice with the Chinese MPOC-20. Professionals received feedback reports of parents, summaries of the inadequacy of service delivery, and developed and implemented ameliorated measures in the FCS policy to strive to provide exemplary service. © 2014 John Wiley & Sons Ltd.

  18. Leachability of rare earth elements (REEs) from solid wastes generated during chemical processing of monazite

    International Nuclear Information System (INIS)

    Radhakrishnan, Sujata; Pillai, P.M.B.

    2001-01-01

    Studies have been carried out to assess the leachability of REEs from solid wastes generated in monazite processing. Leachability of REEs (La, Ce, Nd, Pr, Sm, Gd) and Y from PbS-Ba(Ra)SO 4 (Mixed cake) and Effluent Treatment Plant cake (calcium hydroxy apatite) has been studied using rain water as the leachant. Studies indicate that 23 -60 % of the REEs gets leached out from the mixed cake in the first 24 hours. From the ETP cake, the percentage of REEs leached out were negligible. The results provide inputs for hazards evaluation in accidental situations resulting in breach of integrity of the waste storages. (author)

  19. Process for first charge of gas cooled nuclear reactors with fuel elements

    International Nuclear Information System (INIS)

    Bromkamp, K.H.; Daoud, H.; Engelhardt, K.; Hantke, H.J.

    1979-01-01

    The charging of the THTR-300 takes place continuously via three positions in the inner zone and 12 positions in the outer zone. The inner and outer zone are charged alternately. The size of the charging step is chosen so that the mixing zone formed between the two zones does not exceed a given width. The reflector rods are driven out during the whole fuelling process and the core rods are driven into the core. The charging always takes place in the sub-critical condition, where the degree of sub-criticality is checked by measurement of the inverse multiplication factor after each fuelling step. (DG) [de

  20. Relationship of microbial processes to the fate of transuranic elements in soil

    International Nuclear Information System (INIS)

    Wildung, R.E.; Drucker, H.

    1975-09-01

    Any assessment of the long-term behavior of the transuranics in the terrestrial environment must be based on determination of the factors influencing solubility in soil. The influence of soil properties and abiotic and biotic processes on the long-term solubility of the transuranics entering soils is reviewed in detail. Principal emphasis is directed toward the role of soil microorganisms. Emphasis is given to plutonium, but, where possible, the available information is used to discuss long-term behavior of other transuranics

  1. STRUCTURAL ELEMENTS OF THE PROCESS OF BUSINESS ENGLISH SKILLS FORMATION IN FUTURE DOCTORS

    Directory of Open Access Journals (Sweden)

    Людмила Русалкіна

    2015-05-01

    Full Text Available The article is devoted to the structure and organization of medical students’ business English teaching process. The main attention is spared to the problem of creation of the experimental model of future doctors’ business English skills formation. The suggested model is aimed at productive mastering of lexical and grammar communicative skills, at formation of business English communicative abilities of students-medics; it has communicative direction and is professionally oriented. The exercises correspond to English language knowledge of the future doctors and are set in sequence of increasing complexity.

  2. Sensory Processing Sensitivity as a Marker of Differential Susceptibility to Parenting

    Science.gov (United States)

    Slagt, Meike; Dubas, Judith Semon; van Aken, Marcel A. G.; Ellis, Bruce J.; Dekovic, Maja

    2018-01-01

    In this longitudinal multiinformant study negative emotionality and sensory processing sensitivity were compared as susceptibility markers among kindergartners. Participating children (N = 264, 52.9% boys) were Dutch kindergartners (M[subscript age] = 4.77, SD = 0.60), followed across three waves, spaced seven months apart. Results show that…

  3. Demystifying the IEP Process for Diverse Parents of Children with Disabilities

    Science.gov (United States)

    Lo, Lusa

    2012-01-01

    The complicated individualized education program (IEP) process and annual team meetings can be very stressful for families of children with disabilities, especially for those whose primary language is not English and those who are unfamiliar with the American special education system. Cultural and language barriers and lack of information…

  4. Process of motion by unit steps over a surface provided with elements regularly arranged

    International Nuclear Information System (INIS)

    Cooper, D.E.; Hendee, L.C. III; Hill, W.G. Jr.; Leshem, Adam; Marugg, M.L.

    1977-01-01

    This invention concerns a process for moving by unit steps an apparatus travelling over a surface provided with an array of orifices aligned and evenly spaced in several lines and several parallel rows regularly spaced, the lines and rows being parallel to axes x and y of Cartesian co-ordinates, each orifice having a separate address in the Cartesian co-ordinate system. The surface travelling apparatus has two previously connected arms aranged in directions transversal to each other thus forming an angle corresponding to the intersection of axes x and y. In the inspection and/or repair of nuclear or similar steam generator tubes, it is desirable that such an apparatus should be able to move in front of a surface comprising an array of orifices by the selective alternate introduction and retraction of two sets of anchoring claws of the two respective arms, in relation to the orifices of the array, it being possible to shift the arms in a movement of translation, transversally to each other, as a set of claws is withdrawn from the orifices. The invention concerns a process and aparatus as indicated above that reduces to a minimum the path length of the apparatus between the orifices it is effectively opposite and a given orifice [fr

  5. Sequential separation of transuranic elements and fission products from uranium metal ingots in electrolytic reduction process of spent PWR fuels

    International Nuclear Information System (INIS)

    Chang Heon Lee; Kih Soo Joe; Won Ho Kim; Euo Chang Jung; Kwang Yong Jee

    2009-01-01

    A sequential separation procedure has been developed for the determination of transuranic elements and fission products in uranium metal ingot samples from an electrolytic reduction process for a metallization of uranium dioxide to uranium metal in a medium of LiCl-Li 2 O molten salt at 650 deg C. Pu, Np and U were separated using anion-exchange and tri-n-butylphosphate (TBP) extraction chromatography. Cs, Sr, Ba, Ce, Pr, Nd, Sm, Eu, Gd, Zr and Mo were separated in several groups from Am and Cm using TBP and di(2-ethylhexyl)phosphoric acid (HDEHP) extraction chromatography. Effect of Fe, Ni, Cr and Mg, which were corrosion products formed through the process, on the separation of the analytes was investigated in detail. The validity of the separation procedure was evaluated by measuring the recovery of the stable metals and 239 Pu, 237 Np, 241 Am and 244 Cm added to a synthetic uranium metal ingot dissolved solution. (author)

  6. Study of processes for the preparation of U3O8 powder for MTR fuel elements

    International Nuclear Information System (INIS)

    Neto, R.M.L.

    1989-01-01

    Three preparation methods of high-density U 3 O 8 powder have been studied: grinding of sintered U 3 O 8 pellets, sintering of calcined U 3 O 8 granules; and sintering of ammonium diuranate (ADU) granules. Experiments have been carried out varying ADU calcination time and temperature as well as sintering time, yielding ten U 3 O 8 batches. Powder characteristics, granulometric yield, and number of process steps have been taken into account for comparison purposes. Impurity content, specific surface area, stoichiometry, morphology, density, porosity distribution and phase identification have been considered as parameters for powder characterization. The main conclusions show that the second method (following a 600 0 C/3h ADU calcination) gives the best results. Moreover, the third method gives also good results, but there were some difficulties with ADU handling. (author) [pt

  7. Study of the transfer efficiency of alloyed elements in fluxes during submerged arc welding process

    International Nuclear Information System (INIS)

    Quintana, R.; Cruz, A.; Perdomo, L.; Castellanos, G.; Garcia, L. L.; Formoso, A.; Cores, A.

    2003-01-01

    It is assessed the transfer of chromium, manganese and carbon of different agglomerate fluxes constituted by 18.75% of alloyed load and 81.25% of matrix during the SAW process (submerge Arc Welding). A vitreous basic matrix corresponding to the system SiO 2 -Al 2 O 3 -(CaO+MgO) was obtained from minerals by fusion in the electric arc furnace. The current proportions of the alloyed load components (FeCr, FeMn and graphite) were carried out using a McLean Anderson experiment design. The corresponding fluxes to each experimental point were obtained by granulation with liquid glass;afterwards, their transfer coefficient for a given regimen of welding was determined. The transfer coefficients were calculated by means of a formula based on the laws of mass conservation and of distribution. (Author) 17 refs

  8. Transformation mechanism of nutrient elements in the process of biochar preparation for returning biochar to soil

    Institute of Scientific and Technical Information of China (English)

    Shuangshuang Tian; Zhongxin Tan; Alfreda Kasiulienė; Ping Ai

    2017-01-01

    Returning biochar to soil is a heavily researched topic because biochar functions well for soil improvement. There is a significant loss of nutrients, which occurs during biochar preparation before biochar is returned to soil, thereby seriously undermining biochar's efficacy. Therefore, the transformation mechanisms of biochar pH, mass, nutrients and metals during pyrolysis under different atmospheres and temperatures were studied such that the best method for biochar preparation could be developed. Several conclusions can be reached: (1) a CO2 atmosphere is better than a N2 atmosphere for biochar preparation, although preparation in a CO2 atmosphere is not a common practice for biochar producers; (2) 350 ℃ is the best temperature for biochar preparation because the amount of nutrient loss is notably low based on the premise of straw transferred into biochar; and (3) transforming mechanisms of pH, N, P and K are also involved in the biochar preparation process.

  9. Tracking transformation processes of organic micropollutants in aquatic environments using multi-element isotope fractionation analysis

    International Nuclear Information System (INIS)

    Hofstetter, Thomas B.; Bolotin, Jakov; Skarpeli-Liati, Marita; Wijker, Reto; Kurt, Zohre; Nishino, Shirley F.; Spain, Jim C.

    2011-01-01

    The quantitative description of enzymatic or abiotic transformations of man-made organic micropollutants in rivers, lakes, and groundwaters is one of the major challenges associated with the risk assessment of water resource contamination. Compound-specific isotope analysis enables one to identify (bio)degradation pathways based on changes in the contaminants' stable isotope ratios even if multiple reactive and non-reactive processes cause concentrations to decrease. Here, we investigated how the magnitude and variability of isotope fractionation in some priority pollutants is determined by the kinetics and mechanisms of important enzymatic and abiotic redox reactions. For nitroaromatic compounds and substituted anilines, we illustrate that competing transformation pathways can be assessed via trends of N and C isotope signatures.

  10. Biological processes for concentrating trace elements from uranium mine waters. Technical completion report

    International Nuclear Information System (INIS)

    Brierley, C.L.; Brierley, J.A.

    1981-12-01

    Waste water from uranium mines in the Ambrosia Lake district near Grants, New Mexico, USA, contains uranium, selenium, radium and molybdenum. The Kerr-McGee Corporation has a novel treatment process for waters from two mines to reduce the concentrations of the trace contaminants. Particulates are settled by ponding, and the waters are passed through an ion exchange resin to remove uranium; barium chloride is added to precipitate sulfate and radium from the mine waters. The mine waters are subsequently passed through three consecutive algae ponds prior to discharge. Water, sediment and biological samples were collected over a 4-year period and analyzed to assess the role of biological agents in removal of inorganic trace contaminants from the mine waters. Some of the conclusions derived from this study are: (1) The concentrations of soluble uranium, selenium and molybdenum were not diminished in the mine waters by passage through the series of impoundments which constituted the mine water treatment facility. Uranium concentrations were reduced but this was due to passage of the water through an ion exchange column. (2) The particulate concentrations of the mine water were reduced at least ten-fold by passage of the waters through the impoundments. (3) The sediments were anoxic and enriched in uranium, molybdenum and selenium. The deposition of particulates and the formation of insoluble compounds were proposed as mechanisms for sediment enrichment. (4) The predominant algae of the treatment ponds were the filamentous Spirogyra and Oscillatoria, and the benthic alga, Chara. (5) Adsorptive processes resulted in the accumulation of metals in the algae cells. (6) Stimulation of sulfate reduction by the bacteria resulted in retention of molybdenum, selenium, and uranium in sediments. 1 figure, 16 tables

  11. Development of an alternative process for recovery of uranium from rejected plates in the manufacture of MTR type fuel elements

    International Nuclear Information System (INIS)

    Flores Gonzalez, Jocelyn Natalia

    2011-01-01

    This work discusses the recovery of enriched uranium in U 235 , from fuel plates rejected during the fuel elements manufacturing process for the La Reina Nuclear Studies Center, RECH-1, CCHEN. The plates have an aluminum based alloy coating, AISI-SAE 6061, with U 3 Si 2 powder distributed evenly inside and dispersed in an aluminum matrix. The high cost of enriched uranium means that it must be recovered from plates rejected in the production process because of non-compliance with the plate specifications, and also because some of them undergo destructive testing, to measure the aluminum coating's thickness on each side of the plate. The thickness of the uranium nucleus is measured as well and the size of the defects on the ends of the plate such as 'dog bone' and 'fish tail', that is, for the purposes of quality control. The first step in the process is carried out by dissolving the aluminum in a hot solution of NaOH in order to release the uranium silicide powder that is insoluble in the soda. A second step involves dissolving the uranium silicide in a hot HNO 3 solution, followed by washing and filtering, and then extracting the SX and analyzing its behavior during this stage. During the process 98.9% of the uranium is recovered together with a solution that is enough for the SX process given the experiences that were carried out in the extraction stage

  12. Popularity of processed foodstuffs for infants and small children among parents

    OpenAIRE

    Danuta Górecka; Barbara Szczepaniak; Krystyna Szymandera-Buszka; Ewa Flaczyk

    2007-01-01

    The popularity of seven groups of processed foodstuffs (soups, dinners, pulverized fruits and vegetables, desserts, dairy desserts, juices, teas) for infants and small children aged 4 months up to 3 years, available on the market and comprising a total of 154 products, was investigated in this study. A survey was carried out in the group of 100 individuals. They were mothers and fathers bringing their children to crèche as well as buying analysed products. Among 24 soups vegetable so...

  13. Three types of element fluxes from metabasite into peridotite in analogue experiments: Insights into subduction-zone processes

    Science.gov (United States)

    Perchuk, A. L.; Yapaskurt, V. O.; Griffin, W. L.; Shur, M. Yu.; Gain, S. E. M.

    2018-03-01

    fractionation during porous melt flow. During metabasite-lherzolite interaction, the metabasite layer becomes mildly enriched in LREE; the lherzolite layer, in contrast, is generally depleted in LREE relative to the initial composition. This also indicates element transfer against the direction of fluid flow. Trace-element profiling reveals the development of Eu anomalies in the peridotite layers and the diffusion of many trace elements out of both layers toward the contact zone. The documented processes may be applicable to both Phanerozoic and Precambrian subduction zones.

  14. Rare earth elements mobility processes in an AMD-affected estuary: Huelva Estuary (SW Spain).

    Science.gov (United States)

    Lecomte, K L; Sarmiento, A M; Borrego, J; Nieto, J M

    2017-08-15

    Huelva Estuary is a transition zone where REE-rich acidic waters interact with saline-alkaline seawater. This mixing process influences the geochemical and mineralogical characteristics of particulate and dissolved fractions. The Tinto River has >11,000μgL -1 dissolved REE (pH=1.66), whereas seawater only reaches 8.75·10 -2 μgL -1 dissolved REE (pH=7.87). REE-normalized patterns in "pH<6 solutions" are parallel and show similarities, diminishing their concentration as pH increases. Sequential extraction performed on the generated precipitates of mixed solutions indicates that most REE are associated to the residual phase. In a second order, REE are associated with soluble salts at pH3 and 3.5 whereas in sediments generated at pH4 and 5, they are distributed in salts (1° extraction), poorly crystallized Fe-bearing minerals (schwertmannite, 3° extraction) and well crystallized Fe-bearing minerals (goethite - hematite, 4° extraction). Finally, precipitated REE are highest at pH6 newly formed minerals with a release to solution in higher pH. Copyright © 2017 Elsevier Ltd. All rights reserved.

  15. Processes of social flourishing and their liminal collapse: elements to a genealogy of globalization.

    Science.gov (United States)

    Szakolczai, Arpad

    2016-09-01

    This article aims at exploring a long-term historical perspective on which contemporary globalization can be more meaningfully situated. A central problem with established approaches to globalization is that they are even more presentist than the literature on modernization was. Presentism not only means the ignoring of history, but also the unreflective application to history of concepts taken from the study of the modern world. In contrast, it is argued that contemporary globalization is not a unique development, but rather is a concrete case of a historical type. Taking as its point of departure the spirit, rather than the word, of Max Weber, this article extends the scope of sociological investigation into archaeological evidence. Having a genealogical design and introducing the concept of 'liminality', the article approaches the modern process of globalization through reconstructing the internal dynamics of another type of historical change called 'social flourishing'. Taking up the Weberian approach continued by Eisenstadt in his writings on 'axial age', it moves away from situations of crisis as reference point, shifting attention to periods of revival by introducing the term 'epiphany'. Through the case of early Mesopotamia, it shows how social flourishing can be transmogrified into globalizing growth, gaining a new perspective concerning the kind of 'animating spirit' that might have driven the shift from Renaissance to Reformation, the rise of modern colonialism, or contemporary globalization. More generally, it will retrieve the long-term historical background of the axial age and demonstrate the usefulness and importance of archaeological evidence for sociology. © London School of Economics and Political Science 2016.

  16. Stainless steels with low contents in residual elements for nitric acid environments. Influence of melting processes

    International Nuclear Information System (INIS)

    Desestret, A.; Gay, G.; Soulignac, P.

    1983-01-01

    Nitric acid solutions, as they are for instance employed in the chemical treatment of nuclear fuels, do not apparently pose any more corrosion problems and the safe use of the several steels is well documented. The most difficult corrosion problems are next those related to ''tunnel'' penetrations, in the hot-rolling direction (longitudinal). This phenomenon can be quite important such as to imperial complex structures. Up to the last few years, the only manner to eliminate such ''tunnel'' corrosions was to carry out special operations of remelting and refining under careful selected slag (Electro Slag Remelting or ESR). It turns out indeed that non metallic inclusions are the prime factors in this type of corrosion. Well adapted ladle refining processes made possible to obtain equivalent results at lower costs, while purity and cleanliness are improved to such a degree that a steel of type Cr 18 - Ni 10 thus produced exhibit a nearly absolute resistance to intergranular corrosion in the 14 N (65%) boiling nitric acid (the Huey test) whatever the ''sensitization'' treatment, between 1000 0 C and 600 0 C. In view of its very high tolerance to varied thermal cycles and of the near complete disappearance of any ''tunnel'' corrosion, such a steel is of great interest when complex parts are produced, by machining forged or rolled metal, which is then assembled by welding techniques or procedures which would be forbidden in the case of usual Cr 18 -Ni 10 steels. Similar improvements are also obtained on the two other special steels used in nitric environments: Cr 25 - Ni 20 - C [fr

  17. Recent advances in organic one-dimensional composite materials: design, construction, and photonic elements for information processing.

    Science.gov (United States)

    Yan, Yongli; Zhang, Chuang; Yao, Jiannian; Zhao, Yong Sheng

    2013-07-19

    Many recent activities in the use of one-dimensional nanostructures as photonic elements for optical information processing are explained by huge advantages that photonic circuits possess over traditional silicon-based electronic ones in bandwidth, heat dissipation, and resistance to electromagnetic wave interference. Organic materials are a promising candidate to support these optical-related applications, as they combine the properties of plastics with broad spectral tunability, high optical cross-section, easy fabrication, as well as low cost. Their outstanding compatibility allows organic composite structures which are made of two or more kinds of materials combined together, showing great superiority to single-component materials due to the introduced interactions among multiple constituents, such as energy transfer, electron transfer, exciton coupling, etc. The easy processability of organic 1D crystalline heterostructures enables a fine topological control of both composition and geometry, which offsets the intrinsic deficiencies of individual material. At the same time, the strong exciton-photon coupling and exciton-exciton interaction impart the excellent confinement of photons in organic microstructures, thus light can be manipulated according to our intention to realize specific functions. These collective properties indicate a potential utility of organic heterogeneous material for miniaturized photonic circuitry. Herein, focus is given on recent advances of 1D organic crystalline heterostructures, with special emphasis on the novel design, controllable construction, diverse performance, as well as wide applications in isolated photonic elements for integration. It is proposed that the highly coupled, hybrid optical networks would be an important material basis towards the creation of on-chip optical information processing. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  18. Online study of cracks during laser cladding process based on acoustic emission technique and finite element analysis

    International Nuclear Information System (INIS)

    Wang Fujun; Mao Huaidong; Zhang Dawei; Zhao Xingyu; Shen Yu

    2008-01-01

    This paper presents a novel method by using acoustic emission technique to online study of the crack generation and expansion during laser cladding process. The cracks during laser cladding processes with five different laser cladding powder materials were online tested, respectively, with this method. Through finite element analysis (FEA), the temperature ranges of crack generation and expansion were figured out. The main forms and extended forms of the cracks were investigated by using optical microscope and scanning electron microscope (SEM). The experiment and analysis results show that the amount of cracks increases with the area and thickness of coating and the cooling rate increasing. A majority of cracks occur in the bonding zone and extend cross the whole cladding coating along the perpendicular direction of laser scanning during laser cladding, and few cracks generate in the cooling process. There are mainly four kinds of crack forms, and the forms of crack expansion are related to the stress states of coating and substrate. The method and conclusions in this paper provide important information for reducing the cracks during large area laser cladding process.

  19. A novel processing system of sterol regulatory element-binding protein-1c regulated by polyunsaturated fatty acid.

    Science.gov (United States)

    Nakakuki, Masanori; Kawano, Hiroyuki; Notsu, Tatsuto; Imada, Kazunori; Mizuguchi, Kiyoshi; Shimano, Hitoshi

    2014-05-01

    The proteolytic cascade is the key step in transactivation of sterol regulatory element-binding proteins (SREBPs), a transcriptional factor of lipid synthesis. Proteolysis of SREBP-2 is strictly regulated by sterols, but that of SREBP-1c was not strongly sterol-regulated, but inhibited by polyunsaturated fatty acids (PUFAs). In this study, the proteolytic processing of SREBP-1 and -2 was examined by transfection studies of cDNA-encoding mutants in which all the known cleavage sites were disrupted. In cultured cells, sterol-regulated SREBP-2 processing was completely eliminated by mutation of cleavage sites. In contrast, the corresponding SREBP-1c mutants as well as wild type exhibited large amounts of cleaved products in the nuclear extracts from culture cells and murine liver in vivo. The nuclear form of the mutant SREBP-1c was induced by delipidated condition and suppressed by eicosapentaenoic acid, an n-3 PUFA, but not by sterols. This novel processing mechanism was affected by neither SREBP cleavage-activating protein (SCAP) nor insulin-induced gene (Insig)-1, unlike SREBP-2, but abolished by a serine protease inhibitor. Through analysis of deletion mutant, a site-2 protease recognition sequence (DRSR) was identified to be involved in this novel processing. These findings suggest that SREBP-1c cleavage could be subjected to a novel PUFA-regulated cleavage system in addition to the sterol-regulatory SCAP/Insig system.

  20. Modeling of the inhomogeneity of grain refinement during combined metal forming process by finite element and cellular automata methods

    Energy Technology Data Exchange (ETDEWEB)

    Majta, Janusz; Madej, Łukasz; Svyetlichnyy, Dmytro S.; Perzyński, Konrad; Kwiecień, Marcin, E-mail: mkwiecie@agh.edu.pl; Muszka, Krzysztof

    2016-08-01

    The potential of discrete cellular automata technique to predict the grain refinement in wires produced using combined metal forming process is presented and discussed within the paper. The developed combined metal forming process can be treated as one of the Severe Plastic Deformation (SPD) techniques that consists of three different modes of deformation: asymmetric drawing with bending, namely accumulated angular drawing (AAD), wire drawing (WD) and wire flattening (WF). To accurately replicate complex stress state both at macro and micro scales during subsequent deformations two stage modeling approach was used. First, the Finite Element Method (FEM), implemented in commercial ABAQUS software, was applied to simulate entire combined forming process at the macro scale level. Then, based on FEM results, the Cellular Automata (CA) method was applied for simulation of grain refinement at the microstructure level. Data transferred between FEM and CA methods included set of files with strain tensor components obtained from selected integration points in the macro scale model. As a result of CA simulation, detailed information on microstructure evolution during severe plastic deformation conditions was obtained, namely: changes of shape and sizes of modeled representative volume with imposed microstructure, changes of the number of grains, subgrains and dislocation cells, development of grain boundaries angle distribution as well as changes in the pole figures. To evaluate CA model predictive capabilities, results of computer simulation were compared with scanning electron microscopy and electron back scattered diffraction images (SEM/EBSD) studies of samples after AAD+WD+WF process.

  1. Isotopic Investigations of Nebular and Parent Body Processes with a High Sensitivity Ion Microprobe

    Science.gov (United States)

    McKeegan, Kevin D.

    2005-01-01

    NASA supported the development of the CAMECA ims 1270 ion microprobe at UCLA for applications in cosmochemistry. The primary investigations centered on measuring the microscopic distributions of key isotopic abundances in primitive meteoritic materials as a means of constraining the nature of important thermal and chemical processes in the solar nebula and the timescales associated with those processes. Our prior work on oxygen isotope anomalies in a wide variety of meteoritic materials had led us to a view of a spatially heterogeneous nebula, and in particular, a restricted region for CAI formation that is characterized by O-16-rich gas. Because of its production of CAIs in the energetic local environment near the protosun, the existence of a natural transport mechanism via bipolar outflows, and a general astrophysical plausibility, we were attracted to the fluctuating X-wind model which had been put forward by Frank Shu, Typhoon Lee, and colleagues. With our collaborators, we undertook a series of investigations to test the viability of this hypothesis; this work led directly to the discovery of live Be in CAIs and a clear demonstration of the existence of 160-rich condensates, which necessarily implies an O-16-rich gaseous reservoir in the nebula. Both of these observations fit well within the context of X-wind type models, i.e. formation of CAIs (or condensation of their precursors) in the reconnection ring sunward of the inner edge of the accretion disk, however much work remains to be done to test whether the physical parameters of the model can quantitatively predict not only the thermal histories of CAIs but also their radioactivity. The issue of spatial heterogeneity in the nebula, central to the X-wind model, is also at the heart of any chronology based on short-lived radioisotopes. In this work, we followed up on strong hints for presence of exireme:j: (53 day) short-lived Be-7, and have prepared a manuscript (in revision). We also measured A1-Mg

  2. External Economies Evaluation of Wind Power Engineering Project Based on Analytic Hierarchy Process and Matter-Element Extension Model

    Directory of Open Access Journals (Sweden)

    Hong-ze Li

    2013-01-01

    Full Text Available The external economies of wind power engineering project may affect the operational efficiency of wind power enterprises and sustainable development of wind power industry. In order to ensure that the wind power engineering project is constructed and developed in a scientific manner, a reasonable external economies evaluation needs to be performed. Considering the interaction relationship of the evaluation indices and the ambiguity and uncertainty inherent, a hybrid model of external economies evaluation designed to be applied to wind power engineering project was put forward based on the analytic hierarchy process (AHP and matter-element extension model in this paper. The AHP was used to determine the weights of indices, and the matter-element extension model was used to deduce final ranking. Taking a wind power engineering project in Inner Mongolia city as an example, the external economies evaluation is performed by employing this hybrid model. The result shows that the external economies of this wind power engineering project are belonged to the “strongest” level, and “the degree of increasing region GDP,” “the degree of reducing pollution gas emissions,” and “the degree of energy conservation” are the sensitive indices.

  3. Using finite element modelling to examine the flow process and temperature evolution in HPT under different constraining conditions

    International Nuclear Information System (INIS)

    Pereira, P H R; Langdon, T G; Figueiredo, R B; Cetlin, P R

    2014-01-01

    High-pressure torsion (HPT) is a metal-working technique used to impose severe plastic deformation into disc-shaped samples under high hydrostatic pressures. Different HPT facilities have been developed and they may be divided into three distinct categories depending upon the configuration of the anvils and the restriction imposed on the lateral flow of the samples. In the present paper, finite element simulations were performed to compare the flow process, temperature, strain and hydrostatic stress distributions under unconstrained, quasi-constrained and constrained conditions. It is shown there are distinct strain distributions in the samples depending on the facility configurations and a similar trend in the temperature rise of the HPT workpieces

  4. A positive and multi-element conserving time stepping scheme for biogeochemical processes in marine ecosystem models

    Science.gov (United States)

    Radtke, H.; Burchard, H.

    2015-01-01

    In this paper, an unconditionally positive and multi-element conserving time stepping scheme for systems of non-linearly coupled ODE's is presented. These systems of ODE's are used to describe biogeochemical transformation processes in marine ecosystem models. The numerical scheme is a positive-definite modification of the Runge-Kutta method, it can have arbitrarily high order of accuracy and does not require time step adaption. If the scheme is combined with a modified Patankar-Runge-Kutta method from Burchard et al. (2003), it also gets the ability to solve a certain class of stiff numerical problems, but the accuracy is restricted to second-order then. The performance of the new scheme on two test case problems is shown.

  5. Changes of trace element concentrations in vegetables during the usual food processing in the household found out by means of activation analysis

    International Nuclear Information System (INIS)

    Schelenz, R.

    1981-01-01

    The influence of processing of various vegetables and potatoes (cleaning, cutting, washing, cooking, steam-cooking) on the concentration of ingestion-physiologically important mineral- and trace elements has been studied by means of instrumental activation analysis. The leaching effects play a less important role in steam-cooking. Than in normal cooking. The most important loss already occurs when preparing the vegetables for cooking. This applies especially also to the essential trace elements; but also toxic elements such as arsenic are greatly reduced during this process. (RB) [de

  6. Weld residual stress according to the ways of heat input in the simulation of weld process using finite element analysis

    International Nuclear Information System (INIS)

    Yang, Jun Seog; Lee, Kyoung Soo; Park, Chi Yong

    2008-01-01

    This paper is to discuss distribution of welding residual stresses of a ferritic low alloy steel nozzle with dissimilar metal weld using Alloy 82/182. Two Dimensional (2D) thermo-mechanical finite element analyses are carried out to simulate multi-pass welding process on the basis of the detailed and fabrication data. On performing the welding analysis generally, the characteristics on the heat input and heat transfer of weld are affected on the weld residual stress analyses. Thermal analyses in the welding heat cycle process is very important process in weld residual stress analyses. Therefore, heat is rapidly input to the weld pass material, using internal volumetric heat generation, at a rate which raises the peak weld metal temperature to 2200 .deg. C and the base metal adjacent to the weld to about 1400 .deg. C. These are approximately the temperature that the weld metal and surrounding base materials reach during welding. Also, According to the various ways of applying the weld heat source, the predicted residual stress results are compared with measured axial, hoop and radial through-wall profiles in the heat affected zone of test component. Also, those results are compared with those of full 3-dimensional simulation

  7. Technospheric Mining of Rare Earth Elements from Bauxite Residue (Red Mud): Process Optimization, Kinetic Investigation, and Microwave Pretreatment.

    Science.gov (United States)

    Reid, Sable; Tam, Jason; Yang, Mingfan; Azimi, Gisele

    2017-11-10

    Some rare earth elements (REEs) are classified under critical materials, i.e., essential in use and subject to supply risk, due to their increasing demand, monopolistic supply, and environmentally unsustainable and expensive mining practices. To tackle the REE supply challenge, new initiatives have been started focusing on their extraction from alternative secondary resources. This study puts the emphasis on technospheric mining of REEs from bauxite residue (red mud) produced by the aluminum industry. Characterization results showed the bauxite residue sample contains about 0.03 wt% REEs. Systematic leaching experiments showed that concentrated HNO 3 is the most effective lixiviant. However, because of the process complexities, H 2 SO 4 was selected as the lixiviant. To further enhance the leaching efficiency, a novel process based on microwave pretreatment was employed. Results indicated that microwave pretreatment creates cracks and pores in the particles, enabling the lixiviant to diffuse further into the particles, bringing more REEs into solution, yielding of 64.2% and 78.7% for Sc and Nd, respectively, which are higher than the maximum obtained when HNO 3 was used. This novel process of "H 2 SO 4 leaching-coupled with-microwave pretreatment" proves to be a promising technique that can help realize the technological potential of REE recovery from secondary resources, particularly bauxite residue.

  8. Numerical Simulation of Two-Fluid Mingling Using the Particle Finite Element Method with Applications to Magmatic and Volcanic Processes

    Science.gov (United States)

    de Mier, M.; Costa, F.; Idelsohn, S.

    2008-12-01

    Many magmatic and volcanic processes (e.g., magma differentiation, mingling, transport in the volcanic conduit) are controlled by the physical properties and flow styles of high-temperature silicate melts. Such processes can be experimentally investigated using analog systems and scaling methods, but it is difficult to find the suitable material and it is generally not possible to quantitatively extrapolate the results to the natural system. An alternative means of studying fluid dynamics in volcanic systems is with numerical models. We have chosen the Particle Finite Element Method (PFEM), which is based on a Delaunay mesh that moves with the fluid velocity, the Navier-Stokes equations in Lagrangian formulation, and linear elements for velocity, pressure, and temperature. Remeshing is performed when the grid becomes too distorted [E. Oñate et al., 2004. The Particle Finite Element Method: An Overview. Int. J. Comput. Meth. 1, 267-307]. The method is ideal for tracking material interfaces between different fluids or media. Methods based on Eulerian reference frames need special techniques, such as level-set or volume-of-fluid, to capture the interface position, and these techniques add a significant numerical diffusion at the interface. We have performed a series of two-dimensional simulations of a classical problem of fluid dynamics in magmatic and volcanic systems: intrusion of a basaltic melt in a silica-rich magma reservoir. We have used realistic physical properties and equations of state for the silicate melts (e.g., temperature, viscosity, and density) and tracked the changes in the system for geologically relevant time scales (up to 100 years). The problem is modeled by the low-Mach-number equations derived from an asymptotic analysis of the compressible Navier-Stokes equations that removes shock waves from the flow but allows however large variations of density due to temperature variations. Non-constant viscosity and volume changes are taken into account

  9. A pilot study of the efficacy of a computerized executive functioning remediation training with game elements for children with ADHD in an outpatient setting: outcome on parent- and teacher-rated executive functioning and ADHD behavior.

    Science.gov (United States)

    van der Oord, S; Ponsioen, A J G B; Geurts, H M; Ten Brink, E L; Prins, P J M

    2014-11-01

    This pilot study tested the short- and long-term efficacy (9 weeks follow-up) of an executive functioning (EF) remediation training with game elements for children with ADHD in an outpatient clinical setting, using a randomized controlled wait-list design. Furthermore, in a subsample, that is, those treated with methylphenidate, additive effects of the EF training were assessed. A total of 40 children (aged 8-12 years) were randomized to the EF training or wait-list. The training consisted of a 25-session training of inhibition, cognitive flexibility, and working memory. Treatment outcome was assessed by parent- and teacher-rated EF, ADHD, oppositional deviant disorder, and conduct disorder symptoms. Children in the EF training showed significantly more improvement than those in the wait-list condition on parent-rated EF and ADHD behavior in the total sample and in the subsample treated with methylphenidate. Effects were maintained at follow-up. This pilot study shows promising evidence for the efficacy of an EF training with game elements. © 2012 SAGE Publications.

  10. The impact of children's internalizing and externalizing problems on parenting: Transactional processes and reciprocal change over time.

    Science.gov (United States)

    Serbin, Lisa A; Kingdon, Danielle; Ruttle, Paula L; Stack, Dale M

    2015-11-01

    Most theoretical models of developmental psychopathology involve a transactional, bidirectional relation between parenting and children's behavior problems. The present study utilized a cross-lagged panel, multiple interval design to model change in bidirectional relations between child and parent behavior across successive developmental periods. Two major categories of child behavior problems, internalizing and externalizing, and two aspects of parenting, positive (use of support and structure) and harsh discipline (use of physical punishment), were modeled across three time points spaced 3 years apart. Two successive developmental intervals, from approximately age 7.5 to 10.5 and from 10.5 to 13.5, were included. Mother-child dyads (N = 138; 65 boys) from a lower income longitudinal sample of families participated, with standardized measures of mothers rating their own parenting behavior and teachers reporting on child's behavior. Results revealed different types of reciprocal relations between specific aspects of child and parent behavior, with internalizing problems predicting an increase in positive parenting over time, which subsequently led to a reduction in internalizing problems across the successive 3-year interval. In contrast, externalizing predicted reduced levels of positive parenting in a reciprocal sequence that extended across two successive intervals and predicted increased levels of externalizing over time. Implications for prevention and early intervention are discussed.

  11. Financial stress, parent functioning and adolescent problem behavior: an actor-partner interdependence approach to family stress processes in low-, middle-, and high-income families.

    Science.gov (United States)

    Ponnet, Koen

    2014-10-01

    The family stress model proposes that financial stress experienced by parents is associated with problem behavior in adolescents. The present study applied an actor-partner interdependence approach to the family stress model and focused on low-, middle-, and high-income families to broaden our understanding of the pathways by which the financial stress of mothers and fathers are related to adolescent outcomes. The study uses dyadic data (N = 798 heterosexual couples) from the Relationship between Mothers, Fathers and Children study in which two-parent families with an adolescent between 11 and 17 years of age participated. Path-analytic results indicated that in each of the families the association between parents' financial stress and problem behavior in adolescents is mediated through parents' depressive symptoms, interparental conflict, and positive parenting. Family stress processes also appear to operate in different ways for low-, middle-, and high-income families. In addition to a higher absolute level of financial stress in low-income families, financial stress experienced by mothers and fathers in these families had significant direct and indirect effects on problem behavior in adolescents, while in middle- and high-income families only significant indirect effects were found. The financial stress of a low-income mother also had a more detrimental impact on her level of depressive feelings than it had on mothers in middle-income families. Furthermore, the study revealed gender differences in the pathways of mothers and fathers. Implications for research, clinical practice, and policy are also discussed.

  12. A statistical model for prediction of fuel element failure using the Markov process and entropy minimax principles

    International Nuclear Information System (INIS)

    Choi, K.Y.; Yoon, Y.K.; Chang, S.H.

    1991-01-01

    This paper reports on a new statistical fuel failure model developed to take into account the effects of damaging environmental conditions and the overall operating history of the fuel elements. The degradation of material properties and damage resistance of the fuel cladding is mainly caused by the combined effects of accumulated dynamic stresses, neutron irradiation, and chemical and stress corrosion at operating temperature. Since the degradation of material properties due to these effects can be considered as a stochastic process, a dynamic reliability function is derived based on the Markov process. Four damage parameters, namely, dynamic stresses, magnitude of power increase from the preceding power level and with ramp rate, and fatigue cycles, are used to build this model. The dynamic reliability function and damage parameters are used to obtain effective damage parameters. The entropy maximization principle is used to generate a probability density function of the effective damage parameters. The entropy minimization principle is applied to determine weighting factors for amalgamation of the failure probabilities due to the respective failure modes. In this way, the effects of operating history, damaging environmental conditions, and damage sequence are taken into account

  13. Investigation on the Effects of Process Parameters on Laser Percussion Drilling Using Finite Element Methodology; Statistical Modelling and Optimization

    Directory of Open Access Journals (Sweden)

    Mahmoud Moradi

    Full Text Available Abstract In the present research, the simulation of the Nickel-base superalloy Inconel 718 fiber-laser drilling process with the thickness of 1mm is investigated through the Finite Element Method. In order to specify the appropriate Gaussian distribution of laser beam, the results of an experimental research on glass laser drilling were simulated using three types of Gaussian distribution. The DFLUX subroutine was used to implement the laser heat sources of the models using the Fortran language. After the appropriate Gaussian distribution was chosen, the model was validated with the experimental results of the Nickel-base superalloy Inconel 718 laser drilling process. The negligible error percentage among the experimental and simulation results demonstrates the high accuracy of this model. The experiments were performed based on the Response Surface Methodology (RSM as a statistical design of experiment (DOE approach to investigate the influence of process parameters on the responses, obtaining the mathematical regressions and predicting the new results. Four parameters i.e. laser pulse frequency (150 to 550 Hz, laser power (200 to 500 watts, laser focal plane position (-0.5 to +0.5 mm and the duty cycle (30 to 70% were considered to be the input variables in 5 levels and four external parameters i.e. the hole's entrance and exit diameters, hole taper angle and the weight of mass removed from the hole, were observed to be the process output responses of this central composite design. By performing the statistical analysis, the input and output parameters were found to have a direct relation with each other. By an increase in each of the input variables, the entrance and exit hole diameters, the hole taper angel, and the weight of mass removed from the hole increase. Finally, the results of the conducted simulations and statistical analyses having been used, the laser drilling process was optimized by means of the desire ability approach. Good

  14. Measuring parent perceptions of school climate.

    Science.gov (United States)

    Schueler, Beth E; Capotosto, Lauren; Bahena, Sofía; McIntyre, Joseph; Gehlbach, Hunter

    2014-03-01

    Parents' attitudes about their children's schools matter. Their views can shape their children's attitudes about school, affect their levels of family-school engagement, and influence their residential and school enrollment decisions. In this article, we describe the development of a survey scale to assess parent perceptions of the climate of their child's school. Our comprehensive scale development process incorporated feedback from academics and potential respondents from the outset of the design process to enhance scale quality. We conducted 3 studies with national samples of parents (n = 385; n = 253; n = 266) to gather evidence of scale score reliability and valid score inferences based on convergent and discriminant validity. Through confirmatory factor analysis, we identified a theoretically grounded factor structure that fit the data well but found no evidence that parental response patterns distinguish between academic and social elements of school climate. Furthermore, we found that parents of younger children, on average, had a more positive perception of the school's climate than did parents of older children. We conclude by discussing how researchers and Pre-K-12 schools and districts can use the scale to aid school improvement efforts. 2014 APA

  15. Flux and concentration processes of radioactive elements in the forest industry; dosimetry, biofueled heating plants, the alkaline and the acidic pulp mill processes

    International Nuclear Information System (INIS)

    Ravila, A.; Holm, E.

    1992-01-01

    A fraction of the radionuclides released to the forest ecosystem will be incorporated into different parts of the trees and the wood. A common factor for both biofueled power plants and pulp mills is that they concentrate the radionuclides initially present in the in the biofuel or wood in ashes or other products. The enrichment of radioactive elements is due to the combustion process or in a pulp mill, the combustion of bark and liquors, and also the processes in the pulp mill recycling system. The radiological impacts to man from forest industry arises form radiation emitted from the radionuclides present in ash and pulp mill liquors and liquor sludge. The quantification and calculation of past, present and future activity concentrations in biofuels, ash and pulp mill waste products are all important when assessments of the radiation dose is done. In order to assess the resulting dose to staff working close to radionuclide containing recycling systems and waste dumps, it is necessary to know the dynamics (inflow rate and residence time) of the radionuclides in that system

  16. Investigation of the Rock Fragmentation Process by a Single TBM Cutter Using a Voronoi Element-Based Numerical Manifold Method

    Science.gov (United States)

    Liu, Quansheng; Jiang, Yalong; Wu, Zhijun; Xu, Xiangyu; Liu, Qi

    2018-04-01

    In this study, a two-dimensional Voronoi element-based numerical manifold method (VE-NMM) is developed to analyze the granite fragmentation process by a single tunnel boring machine (TBM) cutter under different confining stresses. A Voronoi tessellation technique is adopted to generate the polygonal grain assemblage to approximate the microstructure of granite sample from the Gubei colliery of Huainan mining area in China. A modified interface contact model with cohesion and tensile strength is embedded into the numerical manifold method (NMM) to interpret the interactions between the rock grains. Numerical uniaxial compression and Brazilian splitting tests are first conducted to calibrate and validate the VE-NMM models based on the laboratory experiment results using a trial-and-error method. On this basis, numerical simulations of rock fragmentation by a single TBM cutter are conducted. The simulated crack initiation and propagation process as well as the indentation load-penetration depth behaviors in the numerical models accurately predict the laboratory indentation test results. The influence of confining stress on rock fragmentation is also investigated. Simulation results show that radial tensile cracks are more likely to be generated under a low confining stress, eventually coalescing into a major fracture along the loading axis. However, with the increase in confining stress, more side cracks initiate and coalesce, resulting in the formation of rock chips at the upper surface of the model. In addition, the peak indentation load also increases with the increasing confining stress, indicating that a higher thrust force is usually needed during the TBM boring process in deep tunnels.

  17. A conserved helicase processivity factor is needed for conjugation and replication of an integrative and conjugative element.

    Directory of Open Access Journals (Sweden)

    Jacob Thomas

    Full Text Available Integrative and conjugative elements (ICEs are agents of horizontal gene transfer and have major roles in evolution and acquisition of new traits, including antibiotic resistances. ICEs are found integrated in a host chromosome and can excise and transfer to recipient bacteria via conjugation. Conjugation involves nicking of the ICE origin of transfer (oriT by the ICE-encoded relaxase and transfer of the nicked single strand of ICE DNA. For ICEBs1 of Bacillus subtilis, nicking of oriT by the ICEBs1 relaxase NicK also initiates rolling circle replication. This autonomous replication of ICEBs1 is critical for stability of the excised element in growing cells. We found a conserved and previously uncharacterized ICE gene that is required for conjugation and replication of ICEBs1. Our results indicate that this gene, helP (formerly ydcP, encodes a helicase processivity factor that enables the host-encoded helicase PcrA to unwind the double-stranded ICEBs1 DNA. HelP was required for both conjugation and replication of ICEBs1, and HelP and NicK were the only ICEBs1 proteins needed for replication from ICEBs1 oriT. Using chromatin immunoprecipitation, we measured association of HelP, NicK, PcrA, and the host-encoded single-strand DNA binding protein Ssb with ICEBs1. We found that NicK was required for association of HelP and PcrA with ICEBs1 DNA. HelP was required for association of PcrA and Ssb with ICEBs1 regions distal, but not proximal, to oriT, indicating that PcrA needs HelP to progress beyond nicked oriT and unwind ICEBs1. In vitro, HelP directly stimulated the helicase activity of the PcrA homologue UvrD. Our findings demonstrate that HelP is a helicase processivity factor needed for efficient unwinding of ICEBs1 for conjugation and replication. Homologues of HelP and PcrA-type helicases are encoded on many known and putative ICEs. We propose that these factors are essential for ICE conjugation, replication, and genetic stability.

  18. Recovery of Rare Earth Elements from Coal and Coal Byproducts via a Closed Loop Leaching Process: Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Peterson, Richard [Battelle Memorial Inst., Columbus, OH (United States); Heinrichs, Michael [Battelle Memorial Inst., Columbus, OH (United States); Argumedo, Darwin [Battelle Memorial Inst., Columbus, OH (United States); Taha, Rachid [Battelle Memorial Inst., Columbus, OH (United States); Winecki, Slawomir [Battelle Memorial Inst., Columbus, OH (United States); Johnson, Kathryn [Battelle Memorial Inst., Columbus, OH (United States); Lane, Ann [Battelle Memorial Inst., Columbus, OH (United States); Riordan, Daniel [Battelle Memorial Inst., Columbus, OH (United States)

    2017-08-31

    REEs using the ADP technology. In AOI 1, Ohio coal sources with the potential to provide a consistent source of rare earth element concentrations above 300 parts per million will be identified. Coal sample inventories from West Virginia and Pennsylvania will also be assessed for purposes of comparison. Three methods of preparing the coal ash will be evaluated for their potential to enhance the technical feasibility and economics of REE recovery. Three sources of coal ash are targeted for evaluation of the economics of REE recovery in this project: (1) coal ash from power generation stations, to include fly ash and/or bottom ash, (2) ash generated in a lower temperature ashing process, and (3) ash residual from Battelle’s coal liquefaction process. Making use of residual ash from coal liquefaction processes directly leverages work currently being conducted by Battelle for DOE NETL in response to DE-FOA-0000981 entitled “Greenhouse Gas Emissions Reductions Research and Development Leading to Cost-Competitive Coal-to-Liquids Based Jet Fuel Production.” Using the sample characterization results and regional information regarding REE concentration, availability and cost, a TEA will be developed. The previously generated laboratory testing results for leaching and REE recovery via the ADP will be used to perform the TEA, along with common engineering assumptions for scale up of equipment and labor costs. Finally, upon validation of the economic feasibility of the process by the TEA, limited laboratory testing will be performed to support the design of a bench scale system. In a future project phase, it is envisioned that the bench scale system will be constructed and operated to prove the process on a continuous basis.

  19. Compilation of Cooperative Data Element Dictionary of Five Federal Agencies’ Systems for Processing of Technical Report Literature

    Science.gov (United States)

    1983-03-01

    investigator participated with Libary of Congress (LC) Staff and Gov- ernment Printing Office (GPO) catalogers in identifying which data elements...National Standards Institute Standard format, ANSI Z.39-2). This standard includes iden- tif ication of specific data elements by means of 3- digit tags...the closer they can come to efficient exchange. But tags assigned to the core data elements differ: they are all 3- digit tags, but the same 3 digits

  20. COST action TD1407: network on technology-critical elements (NOTICE)—from environmental processes to human health threats

    OpenAIRE

    Cobelo-García, A.; Filella, M.; Croot, P.; Frazzoli, C.; Du Laing, G.; Ospina-Alvarez, N.; Rauch, S.; Salaun, P.; Schäfer, J.; Zimmermann, S.

    2015-01-01

    The current socio-economic, environmental and public health challenges that countries are facing clearly need common-defined strategies to inform and support our transition to a sustainable economy. Here, the technology-critical elements (which includes Ga, Ge, In, Te, Nb, Ta, Tl, the Platinum Group Elements and most of the rare-earth elements) are of great relevance in the development of emerging key technologies—including renewable energy, energy efficiency, electronics or the aerospace ind...

  1. Neutron activation analysis of trace metallic elements eluted from molecular sieves in the dehydration process of safflower oil

    Energy Technology Data Exchange (ETDEWEB)

    Takasago, Masahisa; Kobayashi, Koichi; Taru, Yasunori; Takaoka, Kyo (Musashi Inst. of Tech., Tokyo (Japan))

    1992-11-01

    Dissolved water in safflower oil affects the autoxidation of this oil significantly. Molecular sieves were used to remove the dissolved water from the oil. This method is much simpler than that of distillation, and dissolved water can be removed to the same extent as that by distillation. But, due to the elution of many kinds of trace metallic elements in the oil dehydrated with molecular sieves, these elements were analyzed by neutron activation analysis. For a data comparison trace amounts of metallic elements in the oil dehydrated by distillation were also analyzed. Since the intensity of the [gamma] ray-photoelectric peak of nuclide [sup 28]Al was largest among the detected elements, this element was analyzed quantitatively and the other elements qualitatively. In safflower oil dehydrated with molecular sieves, 14 kinds of the elements (I, Br, Al, Mg, Si, V, Cl, Nd, Ta, Cr, Sb, Cs, Co, Na) were detected. Also, I, Br, Cl, Cr, Ta, Sb, and Al elements were detected in the oil dehydrated by distillation. The intensity of the photoelectric peak of nuclide except [sup 28]Al was essentially the same as that in the oil dehydrated by distillation, but the intensity of [sup 28]Al in the oil with molecular sieves was about 28 times stronger than that in distillation oil. In the molecular sieves, 19 impure elements in addition to the original constituents (Na, K, Al, si, O) were detected. It was Al, Na, Si, Nd, Cs, and Co along with impure elements may possibly have been eluted in the oil. Al element in safflower oil dehydrated with molecular sieves was analyzed quantitatively. 0.91 ppm of Al was detected in safflower oil. The eluted amount of Al in safflower oil dehydrated by distillation was 0.032 ppm. A larger amount of Al element was thus eluted into the oil dehydrated with molecular sieves than by distillation. (author).

  2. Neutron activation analysis of trace metallic elements eluted from molecular sieves in the dehydration process of safflower oil

    International Nuclear Information System (INIS)

    Takasago, Masahisa; Kobayashi, Koichi; Taru, Yasunori; Takaoka, Kyo

    1992-01-01

    Dissolved water in safflower oil affects the autoxidation of this oil significantly. Molecular sieves were used to remove the dissolved water from the oil. This method is much simpler than that of distillation, and dissolved water can be removed to the same extent as that by distillation. But, due to the elution of many kinds of trace metallic elements in the oil dehydrated with molecular sieves, these elements were analyzed by neutron activation analysis. For a data comparison trace amounts of metallic elements in the oil dehydrated by distillation were also analyzed. Since the intensity of the γ ray-photoelectric peak of nuclide 28 Al was largest among the detected elements, this element was analyzed quantitatively and the other elements qualitatively. In safflower oil dehydrated with molecular sieves, 14 kinds of the elements (I, Br, Al, Mg, Si, V, Cl, Nd, Ta, Cr, Sb, Cs, Co, Na) were detected. Also, I, Br, Cl, Cr, Ta, Sb, and Al elements were detected in the oil dehydrated by distillation. The intensity of the photoelectric peak of nuclide except 28 Al was essentially the same as that in the oil dehydrated by distillation, but the intensity of 28 Al in the oil with molecular sieves was about 28 times stronger than that in distillation oil. In the molecular sieves, 19 impure elements in addition to the original constituents (Na, K, Al, si, O) were detected. It was Al, Na, Si, Nd, Cs, and Co along with impure elements may possibly have been eluted in the oil. Al element in safflower oil dehydrated with molecular sieves was analyzed quantitatively. 0.91 ppm of Al was detected in safflower oil. The eluted amount of Al in safflower oil dehydrated by distillation was 0.032 ppm. A larger amount of Al element was thus eluted into the oil dehydrated with molecular sieves than by distillation. (author)

  3. Maternal Personality, Parenting Cognitions and Parenting Practices

    Science.gov (United States)

    Bornstein, Marc H.; Hahn, Chun-Shin; Haynes, O. Maurice

    2011-01-01

    A community sample of 262 European American mothers of firstborn 20-month-olds completed a personality inventory and measures of parenting cognitions (knowledge, self-perceptions, and reports about behavior) and was observed in interaction with their children from which measures of parenting practices (language, sensitivity, affection, and play) were independently coded. Factor analyses of the personality inventory replicated extraction of the Five-Factor model of personality (Openness, Neuroticism, Extraversion, Agreeableness, and Conscientiousness). Controlling for sociodemographic characteristics, the five personality factors qua variables and in patterns qua clusters related differently to diverse parenting cognitions and practices, supporting the multidimensional, modular, and specific nature of parenting. Maternal personality in the normal range, a theoretically important but empirically neglected factor in everyday parenting, has meaning in studies of parenting, child development, and family process. PMID:21443335

  4. Finite element modelling of shot peening and peen forming processes and characterisation of peened AA2024-T351 aluminium alloy

    Science.gov (United States)

    Gariepy, Alexandre

    The main purpose of this thesis was to develop and validate finite element (FE) simulation tools for shot peening and peen forming. The specific aim was to achieve quantitatively accurate predictions for both processes and demonstrate the potential of reliable FE modelling for scientific investigation and industrial applications. First, an improved dynamic impact model that takes into account the stochastic nature of shot peening was proposed by carefully studying its dimensions, introducing a dispersion of shot sizes and significantly reducing its computational cost. In addition, cyclic mechanical testing was conducted to define a suitable material constitutive theory for aluminium alloy (AA) 2024-T3/T351 subjected to shot peening. By combining a realistic shot peening model with an appropriate material law, fairly good residual stress predictions were achieved for three different sets of shot peening parameters. Second, an experimental and numerical characterization of AA2024-T351 shot peened with parameters representative of fatigue life improvement applications was conducted. Multiple techniques, such as micro-indentation, residual stress determination and electron backscatter diffraction, were combined to gain a better understanding of the influence of shot peening on the material. The potential uses of finite element simulation to complement experimental data were also studied. The material heterogeneity arising from the random impact sequence was investigated and it was found that the impact modelling methodology could provide useful information on such heterogeneities. Third, a novel peen forming simulation methodology was introduced. The impact model provided the necessary input data as part of a multiscale approach. Numerically calculated unbalanced induced stress profiles were input into shell elements and the deformed shape after peen forming was computed as a springback analysis. In addition, a simple interpolation method was proposed to model the

  5. Effects of trace element addition on process stability during anaerobic co-digestion of OFMSW and slaughterhouse waste.

    Science.gov (United States)

    Moestedt, J; Nordell, E; Shakeri Yekta, S; Lundgren, J; Martí, M; Sundberg, C; Ejlertsson, J; Svensson, B H; Björn, A

    2016-01-01

    This study used semi-continuous laboratory scale biogas reactors to simulate the effects of trace-element addition in different combinations, while degrading the organic fraction of municipal solid waste and slaughterhouse waste. The results show that the combined addition of Fe, Co and Ni was superior to the addition of only Fe, Fe and Co or Fe and Ni. However, the addition of only Fe resulted in a more stable process than the combined addition of Fe and Co, perhaps indicating a too efficient acidogenesis and/or homoacetogenesis in relation to a Ni-deprived methanogenic population. The results were observed in terms of higher biogas production (+9%), biogas production rates (+35%) and reduced VFA concentration for combined addition compared to only Fe and Ni. The higher stability was supported by observations of differences in viscosity, intraday VFA- and biogas kinetics as well as by the 16S rRNA gene and 16S rRNA of the methanogens. Copyright © 2015 Elsevier Ltd. All rights reserved.

  6. Subjective assessment of kinesitherapy as an element of comprehensive rehabilitation process of subjects with lower spine pain

    Directory of Open Access Journals (Sweden)

    Wioletta Łubkowska

    2016-02-01

      Abstract Background. Spinal pain has triggered interest in many fields of medicine, such as orthopedics, neurology, rheumatology, and rehabilitation. Despite ongoing development of surgery techniques, a major role is played by fitness improvement treatments, which need to be promoted. The aim of the research was a subjective assessment of kinesitherapy as an element of comprehensive rehabilitation process of subjects with lower spine pain. Material/Methods. This paper has an empirical character. The research was conducted amongst a randomly selected group of 60 patients of Independent Public Health Care Unit in Choszczno, Poland (rehabilitation at an outpatients’ clinic, aged 20-51. All of them were subjected to a series of 10 kinesitherapy treatments. The research used diagnostic polling method and the following techniques: survey and implicit interview. Results. The research proved that after completion of 10 treatments, the subjects noticed a significant improvement of their health. Kinesitherapy helped return to an active professional life for those who were forced to resign or suspend their work. Subjects reported that 10 kinesitherapy treatments were enough to notice their effectiveness in lumbar spine pain reduction. Kinesitherapy treatments resulted in a reduced usage of painkillers. Conclusions. There is evidence of positive impact of physical exercise on treatment results and beneficial effects in patients with spinal pain. Proper education aimed at changing bad habits and advising how to care for spine may be a powerful way to fight for health.   Keywords: spine, pain syndromes, lumbar spine, kinesitherapy, curative exercises, improving fitness.

  7. Perilipin-mediated lipid droplet formation in adipocytes promotes sterol regulatory element-binding protein-1 processing and triacylglyceride accumulation.

    Directory of Open Access Journals (Sweden)

    Yu Takahashi

    Full Text Available Sterol regulatory element-binding protein-1 (SREBP-1 has been thought to be a critical factor that assists adipogenesis. During adipogenesis SREBP-1 stimulates lipogenic gene expression, and peroxisome proliferator-activated receptor γ (PPARγ enhances perilipin (plin gene expression, resulting in generating lipid droplets (LDs to store triacylglycerol (TAG in adipocytes. Plin coats adipocyte LDs and protects them from lipolysis. Here we show in white adipose tissue (WAT of plin-/- mice that nuclear active SREBP-1 and its target gene expression, but not nuclear SREBP-2, significantly decreased on attenuated LD formation. When plin-/- mouse embryonic fibroblasts (MEFs differentiated into adipocytes, attenuated LDs were formed and nuclear SREBP-1 decreased, but enforced plin expression restored them to their original state. Since LDs are largely derived from the endoplasmic reticulum (ER, alterations in the ER cholesterol content were investigated during adipogenesis of 3T3-L1 cells. The ER cholesterol greatly reduced in differentiated adipocytes. The ER cholesterol level in plin-/- WAT was significantly higher than that of wild-type mice, suggesting that increased LD formation caused a change in ER environment along with a decrease in cholesterol. When GFP-SREBP-1 fusion proteins were exogenously expressed in 3T3-L1 cells, a mutant protein lacking the S1P cleavage site was poorly processed during adipogenesis, providing evidence of the increased canonical pathway for SREBP processing in which SREBP-1 is activated by two cleavage enzymes in the Golgi. Therefore, LD biogenesis may create the ER microenvironment favorable for SREBP-1 activation. We describe the novel interplay between LD formation and SREBP-1 activation through a positive feedback loop.

  8. Processing of FRG high-temperature gas-cooled reactor fuel elements at General Atomic under the US/FRG cooperative agreement for spent fuel elements

    International Nuclear Information System (INIS)

    Holder, N.D.; Strand, J.B.; Schwarz, F.A.; Drake, R.N.

    1981-11-01

    The Federal Republic of Germany (FRG) and the United States (US) are cooperating on certain aspects of gas-cooled reactor technology under an umbrella agreement. Under the spent fuel treatment development section of the agreement, both FRG mixed uranium/ thorium and low-enriched uranium fuel spheres have been processed in the Department of Energy-sponsored cold pilot plant for high-temperature gas-cooled reactor (HTGR) fuel processing at General Atomic Company in San Diego, California. The FRG fuel spheres were crushed and burned to recover coated fuel particles suitable for further treatment for uranium recovery. Successful completion of the tests described in this paper demonstrated certain modifications to the US HTGR fuel burining process necessary for FRG fuel treatment. Results of the tests will be used in the design of a US/FRG joint prototype headend facility for HTGR fuel

  9. Processing of FRG mixed oxide fuel elements at General Atomic under the US/FRG cooperative agreement for spent fuel elements

    International Nuclear Information System (INIS)

    Holder, N.D.; Strand, J.B.; Schwarz, F.A.; Tischer, H.E.

    1980-11-01

    The Federal Republic of Germany (FRG) and the United States (US) are cooperating on certain aspects gas-cooled reactor technology under an umbrella agreement. Under the spent fuel treatment section of the agreement, FRG fuel spheres were recently sent for processing in the Department of Energy sponsored cold pilot plant for High-Temperature Gas-Cooled Reactor (HTGR) fuel processing at General Atomic Company in San Diego, California. The FRG fuel spheres were crushed and burned to recover coated fuel particles. These particles were in turn crushed and burned to recover the fuel-bearing kernels for further treatment for uranium recovery. Successful completion of the tests described in this paper demonstrated the applicability of the US HTGR fuel treatment flowsheet to FRG fuel processing. 10 figures

  10. Children's and parents' perceptions of care during the peri-radiographic process when the child is seen for a suspected fracture

    International Nuclear Information System (INIS)

    Björkman, B.; Enskär, K.; Nilsson, S.

    2016-01-01

    Background: Visiting a Radiology department may elicit both positive and negative feelings for children and parents alike. This study investigated children's and parents' perceptions of care during the peri-radiographic process and whether these perceptions correlated with the child's perceptions of pain and distress. Methods: This study utilized a quantitative descriptive design. Its data was collected in five Radiology departments, two where examinations are performed exclusively on children and three that treat both children and adults. Data collection contained questionnaires from children (n = 110) and their parent (n = 110) as well as children's self-reports of pain and distress. Results: The findings illustrated that the children and their parent were satisfied with the care provided throughout the peri-radiographic process, unrelated to the child's self-reported levels of pain and distress or examination setting (i.e. children's department or general department). The highest scores of satisfaction were ascribed to “the radiographer's kindness and ability to help in a sufficient way,” whereas “available time to ask questions and to meet the child's emotional needs” received the lowest scores. Conclusions: Parents and children alike perceived the radiographers as skilled and sensitive throughout the examination, while radiographers' time allocated to interacting with the child was not perceived be sufficiently covered. - Highlights: • Children seen for an acute radiographic examination were satisfied with the provided care. • The radiographers were perceived as both skilled and sensitive to the children's needs. • Children experienced pain and distress during examination on levels ranging from mild to severe. • The allocated time for the children to ask questions were not sufficiently covered. • It is suggested that routines be implemented to reduce children's pain and distress

  11. Parenting Perfectionism and Parental Adjustment

    OpenAIRE

    Lee, Meghan A.; Schoppe-Sullivan, Sarah J.; Kamp Dush, Claire M.

    2012-01-01

    The parental role is expected to be one of the most gratifying and rewarding roles in life. As expectations of parenting become ever higher, the implications of parenting perfectionism for parental adjustment warrant investigation. Using longitudinal data from 182 couples, this study examined the associations between societal- and self-oriented parenting perfectionism and new mothers’ and fathers’ parenting self-efficacy, stress, and satisfaction. For mothers, societal-oriented parenting perf...

  12. Parental experiences with a paediatric palliative care team: A qualitative study.

    Science.gov (United States)

    Verberne, Lisa M; Schouten-van Meeteren, Antoinette Yn; Bosman, Diederik K; Colenbrander, Derk A; Jagt, Charissa T; Grootenhuis, Martha A; van Delden, Johannes Jm; Kars, Marijke C

    2017-12-01

    Parents of children with a life-limiting disease have to rely on themselves at home while adequate paediatric palliative care is lacking. In several countries, paediatric palliative care teams are introduced to ensure continuity and quality of care and to support the child and the family. Yet, little is known about how parents experience such multidisciplinary teams. To obtain insight into the support provided by a new paediatric palliative care team from the parents' perspective. An interpretative qualitative interview study using thematic analysis was performed. A total of 47 single or repeated interviews were undertaken with 42 parents of 24 children supported by a multidisciplinary paediatric palliative care team located at a university children's hospital. The children suffered from malignant or non-malignant diseases. In advance, parents had limited expectations of the paediatric palliative care team. Some had difficulty accepting the need for palliative care for their child. Once parents experienced what the team achieved for their child and family, they valued the team's involvement. Valuable elements were as follows: (1) process-related aspects such as continuity, coordination of care, and providing one reliable point of contact; (2) practical support; and (3) the team members' sensitive and reliable attitude. As a point of improvement, parents suggested more concrete clarification upfront of the content of the team's support. Parents feel supported by the paediatric palliative care team. The three elements valued by parents probably form the structure that underlies quality of paediatric palliative care. New teams should cover these three valuable elements.

  13. Neurocognitive and electrophysiological evidence of altered face processing in parents of children with autism: implications for a model of abnormal development of social brain circuitry in autism.

    Science.gov (United States)

    Dawson, Geraldine; Webb, Sara Jane; Wijsman, Ellen; Schellenberg, Gerard; Estes, Annette; Munson, Jeffrey; Faja, Susan

    2005-01-01

    Neuroimaging and behavioral studies have shown that children and adults with autism have impaired face recognition. Individuals with autism also exhibit atypical event-related brain potentials to faces, characterized by a failure to show a negative component (N170) latency advantage to face compared to nonface stimuli and a bilateral, rather than right lateralized, pattern of N170 distribution. In this report, performance by 143 parents of children with autism on standardized verbal, visual-spatial, and face recognition tasks was examined. It was found that parents of children with autism exhibited a significant decrement in face recognition ability relative to their verbal and visual spatial abilities. Event-related brain potentials to face and nonface stimuli were examined in 21 parents of children with autism and 21 control adults. Parents of children with autism showed an atypical event-related potential response to faces, which mirrored the pattern shown by children and adults with autism. These results raise the possibility that face processing might be a functional trait marker of genetic susceptibility to autism. Discussion focuses on hypotheses regarding the neurodevelopmental and genetic basis of altered face processing in autism. A general model of the normal emergence of social brain circuitry in the first year of life is proposed, followed by a discussion of how the trajectory of normal development of social brain circuitry, including cortical specialization for face processing, is altered in individuals with autism. The hypothesis that genetic-mediated dysfunction of the dopamine reward system, especially its functioning in social contexts, might account for altered face processing in individuals with autism and their relatives is discussed.

  14. Communication Process Between Parents And Children Of Rohingya Refugees To Solve Childrens Traumatic Condition In Termination Medan Northern Sumatra

    Directory of Open Access Journals (Sweden)

    Imeldarina Ginting

    2017-07-01

    Full Text Available Staying in the termination environment for a long time as well as very limited facilities is certainly very influential on the physical and psychological development of children Rohingya refugees. Limitations of interaction with the surrounding environment limited financial condition of the family unmet need for continuing education and environmental conditions and shelter that has not been fully adequate. This condition certainly affects the rate of development of refugee children some of whom are very anxious and feel they have no future. Based on the initial observations of refugees both parents and children are very open the main problem is that there is no certainty in the future when they will be placed into a third country and the lack of educational facilities for their children. The average family of refugees has been living in a termination of more than 5 years. Parent-child communication can affect the overall functioning of the family and the psychosocial well-being of the child Shek 2000. Therefore the role of parental communication is needed to overcome traumatic in the Rohingya refugee children. This study aims to find out how the parent communication to overcome the traumatic conditions of children by forming childrens self-concept giving recognition and support and create models. The research method used is descriptive qualitative method by collecting data through interviews to some parents and children in termination both experiencing direct violent conflict and discrimination that happened in during their stay in their country Interpersonal communication between parents and their children in a conflicting situation was interested to be analyzed by using Coordinated Management Meaning Theory because in a conflicting condition parents should set their psychological condition aside as the traumatic victims. The result of the research showed that the function of parents communication with their children could help solve the

  15. Demonstration of pyropartitioning process by using genuine high-level liquid waste. Reductive-extraction of actinide elements from chlorination product

    International Nuclear Information System (INIS)

    Uozumi, Koichi; Iizuka, Masatoshi; Kurata, Masaki; Ougier, Michel; Malmbeck, Rikard; Winckel, Stefaan van

    2009-01-01

    The pyropartitioning process separates the minor actinide elements (MAs) together with uranium and plutonium from the high-level liquid waste generated at the Purex reprocessing of spent LWR fuel and introduces them to metallic fuel cycle. For the demonstration of this technology, a series experiment using 520g of genuine high-level liquid waste was started and the conversion of actinide elements to their chlorides was already demonstrated by denitration and chlorination. In the present study, a reductive extraction experiment in molten salt/liquid cadmium system to recover actinide elements from the chlorination product of the genuine high-level liquid waste was performed. The results of the experiment are as following; 1) By the addition of the cadmium-lithium alloy reductant, almost all of plutonium and MAs in the initial high-level liquid waste were recovered in the cadmium phase. It means no mass loss during denitration, chlorination, and reductive-extraction. 2) The separation factor values of plutonium, MAs, and rare-earth fission product elements versus uranium agreed with the literature values. Therefore, actinide elements will be separated from fission product elements in the actual system. Hence, the pyropartitioning process was successfully demonstrated. (author)

  16. Investigation of multi-stage cold forward extrusion process using coupled thermo-mechanical finite element analysis

    Science.gov (United States)

    Görtan, Mehmet Okan

    2018-05-01

    Cold extrusion processes are distinguished by their low material usage as well as great efficiency in the production of mid-range and large component series. Although majority of the cold extruded parts are produced using die systems containing multiple forming stages, this subject has rarely been investigated so far. Therefore, the characteristics of multi-stage cold forward rod extrusion is studied in the current work using thermo-mechanically coupled finite element (FE) analysis. A case hardening steel, 16MnCr5 (1.7131) was used as experimental material. Its strain, strain rate and temperature dependent mechanical characteristics were determined using compression testing and modeled in FE simulations via a Johnson-Cook material model. Friction coefficients for the same material while in contact with a tool steel (1.2379) were determined dependent on temperature and contact pressure using sliding compression test (SCT) and modeled by an adaptive friction model developed by the author. In the first set of simulations, rod material with a diameter of 14.9 mm was extruded down to a diameter of 9.6 mm in a single step using three different die opening angles (2α); 20°, 40° and 60°. In the second set of investigations, the same rod was reduced first to 12 mm and then to 9.6 mm in two steps within the same forming die. Press forces, contact normal stresses between extruded material and forming die, material temperature and axial stresses are compared in these two set of simulations and the differences are discussed.

  17. Hybridisations of Variable Neighbourhood Search and Modified Simplex Elements to Harmony Search and Shuffled Frog Leaping Algorithms for Process Optimisations

    Science.gov (United States)

    Aungkulanon, P.; Luangpaiboon, P.

    2010-10-01

    Nowadays, the engineering problem systems are large and complicated. An effective finite sequence of instructions for solving these problems can be categorised into optimisation and meta-heuristic algorithms. Though the best decision variable levels from some sets of available alternatives cannot be done, meta-heuristics is an alternative for experience-based techniques that rapidly help in problem solving, learning and discovery in the hope of obtaining a more efficient or more robust procedure. All meta-heuristics provide auxiliary procedures in terms of their own tooled box functions. It has been shown that the effectiveness of all meta-heuristics depends almost exclusively on these auxiliary functions. In fact, the auxiliary procedure from one can be implemented into other meta-heuristics. Well-known meta-heuristics of harmony search (HSA) and shuffled frog-leaping algorithms (SFLA) are compared with their hybridisations. HSA is used to produce a near optimal solution under a consideration of the perfect state of harmony of the improvisation process of musicians. A meta-heuristic of the SFLA, based on a population, is a cooperative search metaphor inspired by natural memetics. It includes elements of local search and global information exchange. This study presents solution procedures via constrained and unconstrained problems with different natures of single and multi peak surfaces including a curved ridge surface. Both meta-heuristics are modified via variable neighbourhood search method (VNSM) philosophy including a modified simplex method (MSM). The basic idea is the change of neighbourhoods during searching for a better solution. The hybridisations proceed by a descent method to a local minimum exploring then, systematically or at random, increasingly distant neighbourhoods of this local solution. The results show that the variant of HSA with VNSM and MSM seems to be better in terms of the mean and variance of design points and yields.

  18. Development of family and dietary habits questionnaires: the assessment of family processes, dietary habits and adolescents' impulsiveness in Norwegian adolescents and their parents.

    Science.gov (United States)

    Bjelland, Mona; Hausken, Solveig E S; Sleddens, Ester F C; Andersen, Lene F; Lie, Hanne C; Finset, Arnstein; Maes, Lea; Melbye, Elisabeth L; Glavin, Kari; Hanssen-Bauer, Merete W; Lien, Nanna

    2014-10-15

    There is a need for valid and comprehensive measures of parental influence on children's energy balance-related behaviours (EBRB). Such measures should be based on a theoretical framework, acknowledging the dynamic and complex nature of interactions occurring within a family. The aim of the Family & Dietary habits (F&D) project was to develop a conceptual framework identifying important and changeable family processes influencing dietary behaviours of 13-15 year olds. A second aim was to develop valid and reliable questionnaires for adolescents and their parents (both mothers and fathers) measuring these processes. A stepwise approach was used; (1) preparation of scope and structure, (2) development of the F&D questionnaires, (3) the conducting of pilot studies and (4) the conducting of validation studies (assessing internal reliability, test-retest reliability and confirmatory factor analysis) using data from a cross-sectional study. The conceptual framework includes psychosocial concepts such as family functioning, cohesion, conflicts, communication, work-family stress, parental practices and parental style. The physical characteristics of the home environment include accessibility and availability of different food items, while family meals are the sociocultural setting included. Individual characteristics measured are dietary intake (vegetables and sugar-sweetened beverages) and adolescents' impulsivity. The F&D questionnaires developed were tested in a test-retest (54 adolescents and 44 of their parents) and in a cross-sectional survey including 440 adolescents (13-15 year olds), 242 mothers and 155 fathers. The samples appear to be relatively representative for Norwegian adolescents and parents. For adolescents, mothers and fathers, the test-retest reliability of the dietary intake, frequencies of (family) meals, work-family stress and communication variables was satisfactory (ICC: 0.53-0.99). Barratt Impulsiveness Scale-Brief (BIS-Brief) was included

  19. Everyday Life of Young Adults with Intellectual Disabilities: Inclusionary and Exclusionary Processes among Young Adults of Parents with Intellectual Disability

    Science.gov (United States)

    Starke, Mikaela

    2013-01-01

    Ten young adults with an intellectual disability whose parents, too, have an intellectual disability were interviewed and completed questionnaires for this exploratory study aimed at charting their experiences of everyday life. Most of the participants reported high life satisfaction, especially with the domains of friends, leisure time, and…

  20. Parents' and Teachers' Reflections on the Process of Daily Transitions in an Infant and Toddler Laboratory School

    Science.gov (United States)

    Traum, Linda C.; Moran, Mary Jane

    2016-01-01

    This qualitative study considered values, beliefs, perspectives, and meanings of 7 parents and 3 teachers within the context of daily home-to-child care transitions in one infant-toddler center in an early childhood laboratory school. Sociocultural and attachment theories anchored the study and the developmental niche framework informed…

  1. Parenting Outside the Box, Part 2: Sorting through the Information and Navigating the Individualized Education Program Process | Poster

    Science.gov (United States)

    Editor’s note: This article is the second in a series describing one NCI at Frederick parent’s perspective on special needs parenting. Many people living and working in the Washington, D.C., metro area have learned to speak the special language of acronyms, whether they are referring to the federal government, political groups, or other organizations.

  2. Mass distribution and elemental analysis of the resultant atmospheric aerosol particles generated in controlled biomass burning processes

    Science.gov (United States)

    Ordou, N.; Agranovski, I. E.

    2017-12-01

    Air contamination resulting from bushfires is becoming increasingly important research question, as such disasters frequently occur in many countries. The objectives of this project were focused on physical and chemical characterisations of particulate emission resulting from burning of common representatives of Australian vegetation under controlled laboratory conditions. It was found that leaves are burned mostly with flaming phase and producing black smoke resulting in larger particles compared to white smoke in case of branches and grass, dominated by smouldering phase, producing finer particles. Following elemental analysis determined nine main elements in three different size fractions of particulate matter for each category of burning material, ranging from 14.1 μm to particle sizes below 2.54 μm. Potassium was found to be one of the main biomass markers, and sulphur was the ubiquitous element among the smoke particles followed by less prevalent trace elements like Na, Al, Mg, Zn, Si, Ca, and Fe.

  3. Indigenous abundances of siderophile elements in the lunar highlands: implications for the origin of the Moon

    International Nuclear Information System (INIS)

    Delano, J.W.; Ringwood, A.E.

    1978-01-01

    Substantial indigeneous abundances of siderophile elements have been found to be present in the lunar highlands. The abundances of 13 siderophile elements in the parental magma were estimated by using a simple model. It is shown that metal/silicate fractionation within the Moon cannot have been the cause of the siderophile element abundances in the parental highlands magma and primitive, low-Ti mare basalts. The relative abundances of the indigenous siderophile elements in highlands and mare samples seem, instead, to be the result of complex processes which operated prior to the Moon's accretion. The abundances of the relatively involatile, siderophile elements in the parental highlands magma are strikingly similar to the abundances observed in terrestrial oceanic tholeiites. Furthermore, the abundances of the relatively volatile, siderophile elements in the parental highlands magma are also systematically related to the corresponding abundances in terrestrial oceanic tholeiites. In fact, the parental magma of the lunar highlands can be essentially regarded as having been a volatile-depleted terrestrial oceanic tholeite. The origin of the moon is discussed in the context of the results. The probability that depletion of siderophile elements occurred in an earlier generation of differentiated planetesimals similar to those which formed the basaltic achondrites, stony-irons, and irons is examined but can be dismissed on several grounds. It seems that the uniquely terrestrial 'siderophile signature' within the Moon can be explained only if the Moon was derived from the Earth's mantle subsequent to core-formation. (Auth.)

  4. Parenting Coordinators' Practices Recommendations: A Qualitative Study

    OpenAIRE

    Hirsch, Barbara Phyllis

    2016-01-01

    This qualitative study used a phenomenological approach to understand the experiences of seven parenting coordinators in using parenting coordination practices that they have found to be effective and would recommend to other parenting coordinators to achieve the following goals: educating parents, increasing the quality of parenting and co-parenting, managing conflict, and involving children and other family members in the process of parenting coordination. Data were collected with semi-str...

  5. Effects of Heat Input and Bead Generation Methods on Finite Element Analysis of Multi-Pass Welding Process

    Energy Technology Data Exchange (ETDEWEB)

    Park, Won Dong; Kim, Ji Hoon; Bahn, Chi Bum [Pusan National University, Busan (Korea, Republic of)

    2016-10-15

    Welding residual stresses are determined by various factors such as heat input, initial temperature of molten bead, heating time, cooling time, cooling conditions, and boundary conditions. In this study, a sensitivity analysis was performed to find the major factors and reasonable assumptions for simulation. Two-dimensional axisymmetric simulation was conducted by using commercial finite element analysis program ABAQUS, for multi-pass Alloy 82 welds in a 304 Stainless Steel and SA-105 Carbon Steel. The major object is to evaluate effects of the heat input methods and weld bead generation methods on the welding residual stress distribution. Totally four kinds of methods were compared. From the previous results, we could make the following conclusions. 1. Although there are non-negligible differences in HAZ depending on heat input method, welding residual stress distributions have roughly similar trends. However, it is needed to perform the more exact analysis to apply heat energy more carefully into the individual bead. 2. Residual stress distribution were similar for the two weld bead generation technique. However, overlapping was happened when element birth technique was applied. Effects of overlapping could not ignore as deformation increases. However, overlapping problem was avoided when quiet element technique was used. 3. Since existence of inactive bead elements, inaccurate weld residual stresses could be occurred in boundaries of previous and next weld elements in case of quiet element technique.

  6. Offspring of parents with Balkan Endemic Nephropathy have higher C-reactive protein levels suggestive of inflammatory processes: a longitudinal study

    Directory of Open Access Journals (Sweden)

    Tsolova Svetla

    2009-04-01

    Full Text Available Abstract Background Despite the characteristic extensive tubulointerstitial fibrosis, Balkan Endemic Nephropathy (BEN is usually considered a non-inflammatory disease. Methods We examined a marker of inflammation, C-reactive protein (CRP, in the offspring of patients with BEN, a population at risk for BEN, prior to development of established disease to determine if an inflammatory process could be identified in the early stages of the disease. In 2003/04, 102 adult offspring whose parents had BEN and a control group of 99 adult offspring of non-BEN patients were enrolled in this prospective study. This cohort was re-examined yearly for four consecutive years. Levels of serum CRP were measured in years 3 and 4 and compared between groups. The data were analyzed with mixed models. Results Compared to controls, offspring of BEN parents had statistically higher CRP levels in two consecutive years, suggestive of early inflammatory reactivity. Whenever the mother was affected by BEN (both parents, or mother only, serum CRP was significantly increased, but not if only the father had BEN. CRP was inversely related to kidney cortex width but not to markers or renal function. Conclusion Early stages of BEN may involve inflammatory processes. The observation of a maternal involvement supports the concept of fetal programming, which has been implicated in the pathogenesis of other chronic kidney diseases.

  7. Technical Report on the Behavior of Trace Elements, Stable Isotopes, and Radiogenic Isotopes During the Processing of Uranium Ore to Uranium Ore Concentrate

    Energy Technology Data Exchange (ETDEWEB)

    Marks, N. E. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Borg, L. E. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Eppich, G. R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Gaffney, A. M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Genneti, V. G. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Hutcheon, I. D. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Kristo, M. J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Lindvall, R. E. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Ramon, C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Robel, M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Roberts, S. K. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Schorzman, K. C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Sharp, M. A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Singleton, M. J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Williams, R. W. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2015-07-09

    The goals of this SP-1 effort were to understand how isotopic and elemental signatures behave during mining, milling, and concentration and to identify analytes that might preserve geologic signatures of the protolith ores. The impurities that are preserved through the concentration process could provide useful forensic signatures and perhaps prove diagnostic of sample origin.

  8. Evaluation of a new welding process used to joint grids thimbles properly in 16 x 16 fuel assemblies, using the finite element method

    Energy Technology Data Exchange (ETDEWEB)

    Schettino, Carlos Frederico Mattos, E-mail: DPNcarlosschettino@inb.gov.b [Industrias Nucleares do Brasil S.A. (DPN/INB), Resende, RJ (Brazil). Diretoria de Producao Nuclear; Silva, Marcio Adriano Coelho da, E-mail: marcio.adriano@inb.gov.b [Industrias Nucleares do Brasil S.A. (GEACON/INB), Resende, RJ (Brazil). Gerencia de Analise Tecnica do Combustivel

    2011-07-01

    The present work aims to evaluate structurally the new welding process used to join the grids to the guide thimbles properly in 16 x 16 fuel assemblies. This new process is an increase of the number of welding points, 4 to 8, between grids and guide thimbles, giving more stiffness to the whole structure. A finite element model of the fuel assembly design was generated in the program ANSYS 12.1. To build this model were used elements BEAM-4 and several spring type elements. The analysis covered specific loads and displacements, simulating the boundaries conditions found during small deflection acting on the entire structure. The method used to development this analysis was the simulation of a finite element model performing a fuel assembly with four weld points on each grid cell containing the guide thimbles, and then the results of it was compare with another model, with eight weld points on each grid cell containing the guide thimbles. The behavior of the structure under the acting displacement and the related results of the analysis, mainly the stiffness, were satisfied. The results of this analysis were used to prove that the new grid to guide thimble welding process improve the dimensional stability when submitted to loads and displacements required on the fuel assembly design. The performed analysis provided INB to get more information of extreme importance, for the continuity of the development of new process of manufacturing and to improve the design of the current fuel assemblies used in reactors. (author)

  9. Evaluation of a new welding process used to joint grids thimbles properly in 16 x 16 fuel assemblies, using the finite element method

    International Nuclear Information System (INIS)

    Schettino, Carlos Frederico Mattos; Silva, Marcio Adriano Coelho da

    2011-01-01

    The present work aims to evaluate structurally the new welding process used to join the grids to the guide thimbles properly in 16 x 16 fuel assemblies. This new process is an increase of the number of welding points, 4 to 8, between grids and guide thimbles, giving more stiffness to the whole structure. A finite element model of the fuel assembly design was generated in the program ANSYS 12.1. To build this model were used elements BEAM-4 and several spring type elements. The analysis covered specific loads and displacements, simulating the boundaries conditions found during small deflection acting on the entire structure. The method used to development this analysis was the simulation of a finite element model performing a fuel assembly with four weld points on each grid cell containing the guide thimbles, and then the results of it was compare with another model, with eight weld points on each grid cell containing the guide thimbles. The behavior of the structure under the acting displacement and the related results of the analysis, mainly the stiffness, were satisfied. The results of this analysis were used to prove that the new grid to guide thimble welding process improve the dimensional stability when submitted to loads and displacements required on the fuel assembly design. The performed analysis provided INB to get more information of extreme importance, for the continuity of the development of new process of manufacturing and to improve the design of the current fuel assemblies used in reactors. (author)

  10. Decomposing a Chunk into Its Elements and Reorganizing Them As a New Chunk: The Two Different Sub-processes Underlying Insightful Chunk Decomposition

    Directory of Open Access Journals (Sweden)

    Xiaofei Wu

    2017-11-01

    Full Text Available Familiar chunks can be processed highly efficiently, and this automatic process can prohibit the problem solver from developing novel and original ways to creatively solve difficult problems. For this reason, the role of the reverse process, chunk decomposition (CD, the process by which familiar patterns are broken down into their component elements in order to be regrouped in another meaningful manner, has been generally recognized as part of the creative process. However, previous studies on this issue have mainly focused on the decomposition process of CD (the D-process, while the reorganization process of CD has been greatly neglected or has not been distinctively identified in previous work. In this paper, we argue that the R-process could be equally as important as the D-process for CD. Even if a problem solver manages to decompose a familiar chunk into its elements, he or she still may not solve the problem if these elements are not successfully organized in a new and meaningful manner. To investigate whether the cognitive mechanism of the R-process is different from that of the D-process, we designed an experiment for detecting the effects of chunk tightness, which is regarded as the key factor in CD and which can be experimentally manipulated by the radical-level (loose and stroke-level (tight Chinese character CD tasks in the D-process, the R-process, and the more purified organization task (the O-process task that does not involve the decomposition process. Our results showed that the stroke-level (tight task was more difficult than the radical-level (loose task for the D-process. However, for the R-process, the stroke- and radical-level tasks showed no differences in performance. Moreover, for the more purified reorganization task, the O-process task, the radical-level organization and reorganization could be even more difficult than the stroke-level organization and reorganization. This result demonstrated that the cognitive

  11. Digital Parenting and Changing Roles

    Directory of Open Access Journals (Sweden)

    Işıl KABAKÇI YURDAKUL

    2013-12-01

    Full Text Available Information and communication technologies are developing rapidly. Developing technologies are integrated in many fields of life. This situation facilitated almost all fields of life. Owing to integration process, children’s technology use and adaption is easy compare to their parents. But technology use and adaption brings several disadvantages for children. Computer and the Internet have been used nearly all home in about last five years. Parents who were worried about their children when they played outside are worried about their children when they are on net at home. Due to these developments, parenting notion has gain new different dimensions and parenting roles are changed. Parents should now be digital parent, the Internet Parent or online parent. In this paper Digital Parenting is examined and described in additon to thisdigital parenting roles are determined. Based on these roles recommendations are presented for future studies and practices

  12. Solvent refined coal (SRC) process: trace elements research and development report no. 53, interim report no. 34. Volume III. Pilot plant development work part 6: the fate of trace elements in the SRC process for the period, August 1, 1977 - February 28, 1979

    International Nuclear Information System (INIS)

    Filby, R.H.; Khalil, S.R.; Grimm, C.A.; Ekabaram, V.; Hunt, M.L.

    1980-12-01

    This work reports the results of neutron activation analysis determination of the fate of trace elements in the SRC II process. Six coals were studied for their behavior in material balance runs carried out at the Fort Lewis Pilot Plant. The distribution of trace elements among products and input streams was determined by thermal neutron activation analysis using thermal neutron flux of 8 x 10 12 neutrons cm -2 sec -1 followed by Ge(Li) gamma ray spectroscopy. National Bureau of Standards Standard Reference Materials (SRM) were used to evaluate the analytical precision and accuracy of the methods used. For each material balance study the trace element input stream was taken as ground coal and the output streams were vacuum bottoms, SRC II product oil, and process water. In addition to these major components, oils, sludges and waters from liquid-liquid separators, effluent waters, biosludges, and by-product sulfur were also analyzed. Concerning the distribution of trace elements in the SRC II process, it was found that the vacuum bottoms was the major sink for all trace element studied, with the exception of Hg. Much lower trace element concentrations (except for Hg) were found in the SRC II product oil relative to the vacuum bottoms or the feed coal, irrespective of coal type. The results indicate excellent balances for the elements studied, except for Hg. Except for Hg, Se, and C1, the SRC II product and process waters contributed less than 1% of the elemental balances for light oil fractions and process waters indicates that Hg, and to a lesser degree As, Se, and Sb, exhibited volatile behavior in the SRC II process but that the degree of volatility is strongly dependent on conditions or coal type

  13. Three-dimensional cellular automaton-finite element modeling of solidification grain structures for arc-welding processes

    International Nuclear Information System (INIS)

    Chen, Shijia; Guillemot, Gildas; Gandin, Charles-André

    2016-01-01

    Solidification grain structure has significant impact on the final properties of welded parts using fusion welding processes. Direct simulation of grain structure at industrial scale is yet rarely reported in the literature and remains a challenge. A three-dimensional (3D) coupled Cellular Automaton (CA) – Finite Element (FE) model is presented that predicts the grain structure formation during multiple passes Gas Tungsten Arc Welding (GTAW) and Gas Metal Arc Welding (GMAW). The FE model is established in a level set (LS) approach that tracks the evolution of the metal-shielding gas interface due to the addition of metal. The FE method solves the mass, energy and momentum conservation equations for the metal plus shielding gas system based on an adaptive mesh (FE mesh). Fields are projected in a second FE mesh, named CA mesh. A CA grid made of a regular lattice of cubic cells is created to overlay the fixed CA mesh. The CA model based on the CA grid simulates the melting and growth of the grain boundaries in the liquid pool. In order to handle large computational domains while keeping reasonable computational costs, parallel computations and dynamic strategies for the allocation/deallocation of the CA grid are introduced. These strategies correspond to significant optimizations of the computer memories that are demonstrated. The 3D CAFE model is first applied to the simple configuration of single linear passes by GTAW of a duplex stainless steel URANUS 2202. It is then applied to a more persuasive example considering GMAW in spray transfer mode during multiple passes to fill a V-groove chamfer. Simulations reveal the possibility to handle domains with millions of grains in representative domain sizes while following the formation of textures that result from the growth competition among columnar grains. -- Graphical abstract: Simulated 3D grain structure (3D CAFE model) for GTAW multiple linear passes at the surface of a duplex stainless steel (URANUS 22002

  14. Up-scaling mineral-aqueous interfacial processes that govern isotope and trace element partitioning during calcite growth

    Science.gov (United States)

    Lammers, L. N.

    2014-12-01

    The dependence of the isotopic and trace element composition of calcium carbonate minerals on growth conditions including temperature, pH, and salinity is widely used to infer paleoclimate conditions. These inferences rely heavily on phenomenological observations of biogenic and inorganic precipitation both in and ex situ, where only limited variability in solution conditions can be explored. Ionic fluxes between the mineral surface and aqueous growth solution govern the net uptake of both stoichiometric and trace species during calcification, so developing a mechanistic understanding of the reactions governing these fluxes is critical to refine existing proxies and to develop new ones. The micro-scale mechanisms of calcite precipitation from aqueous solution have been extensively studied, and net ionic uptake post-nucleation is known to occur primarily at monomolecular kink sites along step edges at the mineral surface. In this talk, I will present a theoretical framework that uses the quasi-elementary ion attachment and detachment reactions governing ion uptake at kink sites to simultaneously model bulk mineral growth kinetics and tracer partitioning during calcite precipitation. Several distinct processes occur during ion uptake at kink sites that can influence the distribution of trace species, directly impacting the composition of various carbonate paleoproxies including δ44Ca, δ18O, Sr/Ca and Mg/Ca. The distribution of these trace species will be shown to depend on (1) the relative rates of ion desolvation during attachment to kink sites, (2) the relative rates of bond breaking during detachment from kink sites, and (3) the equilibrium partitioning of trace aqueous species. This model accounts for the impact of solution conditions on net ion fluxes and surface speciation, which in turn controls the population of kink sites available for direct ion exchange with the aqueous phase. The impacts of solution variables including pH, temperature and salinity can

  15. Fe isotope composition of bulk chondrules from Murchison (CM2): Constraints for parent body alteration, nebula processes and chondrule-matrix complementarity

    Science.gov (United States)

    Hezel, Dominik C.; Wilden, Johanna S.; Becker, Daniel; Steinbach, Sonja; Wombacher, Frank; Harak, Markus

    2018-05-01

    Chondrules are a major constituent of primitive meteorites. The formation of chondrules is one of the most elusive problems in cosmochemistry. We use Fe isotope compositions of chondrules and bulk chondrites to constrain the conditions of chondrule formation. Iron isotope compositions of bulk chondrules are so far only known from few studies on CV and some ordinary chondrites. We studied 37 chondrules from the CM chondrite Murchison. This is particularly challenging, as CM chondrites contain the smallest chondrules of all chondrite groups, except for CH chondrites. Bulk chondrules have δ56Fe between -0.62 and +0.24‰ relative to the IRMM-014 standard. Bulk Murchison has as all chondrites a δ56Fe of 0.00‰ within error. The δ56Fe distribution of the Murchison chondrule population is continuous and close to normal. The width of the δ56Fe distribution is narrower than that of the Allende chondrule population. Opaque modal abundances in Murchison chondrules is in about 67% of the chondrules close to 0 vol.%, and in 33% typically up to 6.5 vol.%. Chondrule Al/Mg and Fe/Mg ratios are sub-chondritic, while bulk Murchison has chondritic ratios. We suggest that the variable bulk chondrule Fe isotope compositions were established during evaporation and recondensation prior to accretion in the Murchison parent body. This range in isotope composition was likely reduced during aqueous alteration on the parent body. Murchison has a chondritic Fe isotope composition and a number of chondritic element ratios. Chondrules, however, have variable Fe isotope compositions and chondrules and matrix have complementary Al/Mg and Fe/Mg ratios. In combination, this supports the idea that chondrules and matrix formed from a single reservoir and were then accreted in the parent body. The formation in a single region also explains the compositional distribution of the chondrule population in Murchison.

  16. Application of an ecosystem model to evaluate the importance of different processes and food web structure for transfer of 13 elements in a shallow lake.

    Science.gov (United States)

    Konovalenko, L; Bradshaw, C; Andersson, E; Kautsky, U

    2017-04-01

    In environmental risk assessments of nuclear waste, there is need to estimate the potential risks of a large number of radionuclides over a long time period during which the environment is likely to change. Usually concentration ratios (CRs) are used to calculate the activity concentrations in organisms. However, CRs are not available for all radionuclides and they are not easily scalable to the varying environment. Here, an ecosystem transport model of elements, which estimates concentrations in organisms using carbon flows and food transfer instead of CR is presented. It is a stochastic compartment model developed for Lake Eckarfjärden at Forsmark in Sweden. The model was based on available data on carbon circulation, physical and biological processes from the site and identifies 11 functional groups of organisms. The ecosystem model was used to estimate the environmental transfer of 13 elements (Al, Ca, Cd, Cl, Cs, I, Ni, Nb, Pb, Se, Sr, Th, U) to various aquatic organisms, using element-specific distribution coefficients for suspended particles (K d PM ) and upper sediment (K d sed ), and subsequent transfer in the foodweb. The modelled CRs for different organism groups were compared with measured CRs from the lake and literature data, and showed good agreement for many elements and organisms, particularly for lower trophic levels. The model is, therefore, proposed as an alternative to measured CR, though it is suggested to further explore active uptake, assimilation and elimination processes to get better correspondence for some of the elements. The benthic organisms (i.e. bacteria, microphytobenthos and macroalgae) were identified as more important than pelagic organisms for transfer of elements to top predators. The element transfer model revealed that most of the radionuclides were channelled through the microbial loop, despite the fact that macroalgae dominated the carbon fluxes in this lake. Thus, element-specific adsorption of elements to the surface of

  17. Potential for thermochemical conversion of biomass residues from the integrated sugar-ethanol process - Fate of ash and ash-forming elements.

    Science.gov (United States)

    Dirbeba, Meheretu Jaleta; Brink, Anders; DeMartini, Nikolai; Zevenhoven, Maria; Hupa, Mikko

    2017-06-01

    In this work, potential for thermochemical conversion of biomass residues from an integrated sugar-ethanol process and the fate of ash and ash-forming elements in the process are presented. Ash, ash-forming elements, and energy flows in the process were determined using mass balances and analyses of eight different biomass samples for ash contents, elemental compositions, and heating values. The results show that the ash content increases from the sugarcane to the final residue, vinasse. The cane straw, which is left in the field, contains one-third of the energy and 25% of the K and Cl while the vinasse contains 2% of the energy and 40% of the K and Cl in the cane. K and Cl in biomass fuels cause corrosion and fouling problems in boilers and gasifiers. Over 85% of these elements in the straw are water soluble indicating that water leaching would improve it for utilization in thermochemical conversion. Copyright © 2017 Elsevier Ltd. All rights reserved.

  18. Family-centred service: differences in what parents of children with cerebral palsy rate important.

    Science.gov (United States)

    Terwiel, M; Alsem, M W; Siebes, R C; Bieleman, K; Verhoef, M; Ketelaar, M

    2017-09-01

    A family-centred approach to services of children with disabilities is widely accepted as the foundational approach to service delivery in paediatric health care. The 56 items of the Measure of Processes of Care questionnaire (MPOC-56) all reflect elements of family-centred service. In this study, we investigated which elements of family-centred service are rated important by parents of children with cerebral palsy by adding a question on importance to each item of the MPOC-56 (MPOC-56-I). In total, 175 parents of children with cerebral palsy completed the MPOC-56-I. For each MPOC item, parents were asked to rate the importance on a 5-point scale ranging from 0 (not important at all) up to and including 4 (very important). We used Spearman's rank correlation coefficient to further explore the variation in parents' importance ratings. Parents' importance ratings of the MPOC-56 items varied. The percentage of parents rating an item important (importance rating 3 or 4) varied between 43.8% and 96.8%. The percentage of parents rating an item unimportant (rating 0 or 1) varied between 0.0% and 20.3%, and the percentage of parents rating an item neutral (rating 2) varied between 3.0% and 36.0%. Most diverse importance ratings were found for five items concerning the provision of general information. Three correlations between these items and child and parent characteristics were found. Six items were rated important by almost all (≥95%) parents. These items concern elements of specific information about the child, co-ordinated and comprehensive care for child and family and enabling and partnership. Parents rate the importance of family-centred services for their situation in various ways. These findings endorse that family-centred services should recognize the uniqueness of families and should be tailored to what parents find important. © 2017 John Wiley & Sons Ltd.

  19. Bringing parenting interventions back to the future: How randomized microtrials may benefit parenting intervention efficacy

    NARCIS (Netherlands)

    Leijten, P.; Dishion, T.J.; Thomaes, S.; Raaijmakers, M.A.J.; Orobio de Castro, B.; Matthys, W.

    2015-01-01

    A novel approach is needed to promote the efficacy of parenting interventions designed to improve children's mental health. The proposed approach bridges developmental and intervention science to test which intervention elements contribute to parenting intervention program efficacy. The approach

  20. Behaviour of major, minor and trace elements (including REEs during kaolinization processes at Zonouz deposit, northeast of Marand, East Azarbaidjan province

    Directory of Open Access Journals (Sweden)

    Vahideh Alipour

    2011-11-01

    Full Text Available The Zonouz kaolin deposit is located ~15 km northeast of Marand, East-Azarbaidjan province. Based on physical features in field investigations, such as color, five distinct kaolin types including (1 white, (2 lemon, (3 gray, (4 brown, and (5 yellow are distinguished in the deposit. Field evidence and petrographic studies indicate that the deposit is genetically close to trachy-andesite rocks. According to mineralogical data, the deposit contains quartz, kaolinite, montmorillonite, calcite, pyrophyllite, chlorite, muscovite-illite, dolomite, hematite, and anatase minerals. Geochemical data indicate that function of alteration processes on trachy-andesite rocks during development of Zonouz ore deposit was accompanied by leaching of elements such as Al, Na, K, Rb, Ba, V, Hf, Cu, Zr, Tm, Yb, and Lu, enrichment of elements such as U, Nb, and Ta, and leaching-fixation of elements such as Si, Fe, Ca, Mg, Ti, Mn, P, Cs, Sr, Th, Co, Cr, Ni, Y, Ga, LREE, Tb, Dy, Ho, and Er. Incorporation of obtained results from mineralogical and geochemical studies show that physico-chemical conditions of alteration environment, the relative stability of primary minerals, surface adsorption, preferential sorption by metallic oxides, existing of organic matters, scavenging and concentration processes, and fixation in neomorphic mineralogical phases played important role in distribution of elements in the deposit. Geochemical studies show that development of the deposit is relative to two types of processes, (1 hypogene and (2 supergene. The distribution pattern of REEs indicates that differentiation degree of LREEs from HREEs in supergene kaolins is more than hypogene kaolins. Geochemical studies indicate that minerals such as Mn-oxides, zircon, anatase, hematite, cerianite, and secondary phosphates (monazite, rhabdophane, churchite, and zenotime are the potential hosts for rare earth elements in this deposit.