Characterizing bacterial communities in paper production-troublemakers revealed.

Science.gov (United States)

Zumsteg, Anita; Urwyler, Simon K; Glaubitz, Joachim

2017-08-01

Biofilm formation is a major cause of reduced paper quality and increased down time during paper manufacturing. This study uses Illumina next-generation sequencing to identify the microbial populations causing quality issues due to their presence in biofilms and slimes. The paper defects investigated contained traces of the films and/or slime of mainly two genera, Tepidimonas and Chryseobacterium. The Tepidimonas spp. found contributed on average 68% to the total bacterial population. Both genera have been described previously to be associated with biofilms in paper mills. There was indication that Tepidimonas spp. were present as compact biofilm in the head box of one paper machine and was filtered out by the paper web during production. On the other hand Tepidimonas spp. were also present to a large extent in the press and white waters of two nonproblematic paper machines. Therefore, the mere presence of a known biofilm producer alone is not sufficient to cause slimes and therefore paper defects and other critical factors are additionally at play. For instance, we identified Acidovorax sp., which is an early colonizer of paper machines, exhibiting the ability to form extracellular DNA matrices for attachment and biofilm formation. © 2017 The Authors. MicrobiologyOpen published by John Wiley & Sons Ltd.

2- and 3-Monochloropropanediols in paper products and their transfer to foods.

Science.gov (United States)

Becalski, Adam; Zhao, Tony; Breton, Francois; Kuhlmann, Jan

2016-09-01

The occurrence of 2- and 3-monochloropropanediol (MCPDs) in selected paper products sold on the Canadian market and the transfer of 3-MCPD from those products to beverages was probed. Products included coffee filters, tea bags, disposable paper hot beverage cups and milk packaged in paperboard containers. The occurrence MCPDs in coffee and tea filters on the German market was investigated as well. Furthermore, the presence of MCPDs in paper towels on the German market was also investigated. Analytes were determined by stable isotope dilution analysis GC-MS in SIM mode. 3-MCPD was detected in most paper products with levels ranging from a few nanograms in tea bags to a few micrograms in white coffee filters. Milk containers' paperboard contained 3-MCPD at about 500-1500 ng g(-1); however, 3-MCPD was detected in milk only in smaller containers, 237-500 ml (likely due to a lower volume/surface ratio) at levels of about 1 ng g(-1). Out of three disposable hot beverage paper cups tested (of 237-473 ml capacity), paperboard of two contained 3-MCPD at 632-792 ng g(-1), and 3-MCPD was detected in leachate from those paper cups at levels of about 16 ng per cup. 3-MCPD was detected in all paper towels at levels of 42-2466 ng g(-1). 2-MCPD was detected in many paper products (from Canadian and German sources) and in all the towels tested at levels varying from about 0.5-10% of that of 3-MCPD.

77 FR 61742 - Certain Lined Paper Products From India: Preliminary Results of Countervailing Duty...

Science.gov (United States)

2012-10-11

... DEPARTMENT OF COMMERCE International Trade Administration [C-533-844] Certain Lined Paper Products... order on certain lined paper products from India. The period of review (POR) is January 1, 2010, through... (202) 482-1009. Scope of the Order The merchandise subject to the order is certain lined paper products...

The cost analysis of material handling in Chinese traditional praying paper production plant

Science.gov (United States)

Nasution, H.; Budiman, I.; Salim, A.

2018-02-01

Chinese traditional praying paper industry is an industry which produced Chinese traditional religion praying paper. This kind of industry is rarely examined since it was only in Small and Medium Enterprise (SME’s- form). This industry produced various kinds of Chinese traditional paper products. The purpose of this research is to increase the amount of production, reduce waiting time and moving time, and reduce material handling cost. The research was conducted at prime production activities, consists of: calculate the capacity of the material handler, the frequency of movement, cost of material handling, and total cost of material handling. This displacement condition leads to an ineffective and inefficient production process. The alternative was developed using production judgment and aisle standard. Based on the observation results, it is possible to reduce displacement in the production. Using alternative which by-passed displacement from a rolled paper in the temporary warehouse to cutting and printing workstation, it can reduce material handling cost from 2.26 million rupiahs to 2.00 million rupiahs only for each batch of production. This result leads to increasing of production quantity, reducing waiting and moving time about 10% from the current condition.

Determination and ranking cleaner production criteria by using analytic hierarchy process (Case study: Latif paper products company

Directory of Open Access Journals (Sweden)

Yaghob Asadizadeh

2018-02-01

Full Text Available Cleaner production process is an environmentally friendly approach that attempts to reduce waste and energy consumption then reduce environmental pollutions of industrial processes to provide the possibility of sustainable production in industrial units. To achieve this goal and alignment with cleaner production strategies, paper industries should consider reducing wastes of production processes and irregular consumption of energy as a priority in their programs. In this research Analytic Hierarchy Process has been applied and a three level hierarchy model was structured to facilitate the cleaner production process in Latif paper products firm. Using a literature review and field study, the proposed model provided a framework for cleaner production implementation in the firm. Results showed priorities of the main criteria of cleaner production are process change, product modification, implementation of preventive maintenance system, resititution and man force capitals respectively. Process change criterion allocated 40 percent of the total weighing value and has the highest priority in implementation of cleaner production strategy. Existence of industrial automation and its technology level which is a sub criterion of process change has the highest priority among 31 sub criteria. Also some of higher priority sub criteria such as use of higher quality inclusion and implementation of calibration system are related to process change. Therefore, to achieve cleaner production goals and implementation of its strategic objectives it is necessary to pay more attention to this criterion. Inconsistency ratio of the research is 0.06 which indicates the results are compatible. The results of this research can be used to accelerate the implementation of cleaner production process in Iran’s pulp and paper industry.

Decomposition and carbon storage of selected paper products in laboratory-scale landfills

International Nuclear Information System (INIS)

Wang, Xiaoming; De la Cruz, Florentino B.; Ximenes, Fabiano; Barlaz, Morton A.

2015-01-01

The objective of this study was to measure the anaerobic biodegradation of different types of paper products in laboratory-scale landfill reactors. The study included (a) measurement of the loss of cellulose, hemicellulose, organic carbon, and (b) measurement of the methane yields for each paper product. The test materials included two samples each of newsprint (NP), copy paper (CP), and magazine paper (MG), and one sample of diaper (DP). The methane yields, carbon storage factors and the extent of cellulose and hemicellulose decomposition all consistently show that papers made from mechanical pulps (e.g., NPs) are less degradable than those made from chemical pulps where essentially all lignin was chemically removed (e.g., CPs). The diaper, which is not only made from chemical pulp but also contains some gel and plastic, exhibited limited biodegradability. The extent of biogenic carbon conversion varied from 21 to 96% among papers, which contrasts with the uniform assumption of 50% by the Intergovernmental Panel on Climate Change (IPCC) for all degradable materials discarded in landfills. Biochemical methane potential tests also showed that the solids to liquid ratio used in the test can influence the results. - Highlights: • Decomposition of major paper products measured under simulated landfill conditions • Varied decomposition behaviors across paper types governed by pulp types • A copy paper made from eucalyptus exhibited inhibited decomposition

Decomposition and carbon storage of selected paper products in laboratory-scale landfills

Energy Technology Data Exchange (ETDEWEB)

Wang, Xiaoming, E-mail: wangxiaoming_cqu@163.com [Key Laboratory of Three Gorges Reservoir Region' s Eco-Environment, Ministry of Education, National Center for International Research of Low-Carbon and Green Buildings, Chongqing University, Chongqing (China); Department of Civil, Construction, and Environmental Engineering, Campus Box 7908, North Carolina State University, Raleigh, NC 27695-7908 (United States); De la Cruz, Florentino B. [Department of Civil, Construction, and Environmental Engineering, Campus Box 7908, North Carolina State University, Raleigh, NC 27695-7908 (United States); Ximenes, Fabiano [Department of Primary Industries, New South Wales (Australia); Barlaz, Morton A. [Department of Civil, Construction, and Environmental Engineering, Campus Box 7908, North Carolina State University, Raleigh, NC 27695-7908 (United States)

2015-11-01

The objective of this study was to measure the anaerobic biodegradation of different types of paper products in laboratory-scale landfill reactors. The study included (a) measurement of the loss of cellulose, hemicellulose, organic carbon, and (b) measurement of the methane yields for each paper product. The test materials included two samples each of newsprint (NP), copy paper (CP), and magazine paper (MG), and one sample of diaper (DP). The methane yields, carbon storage factors and the extent of cellulose and hemicellulose decomposition all consistently show that papers made from mechanical pulps (e.g., NPs) are less degradable than those made from chemical pulps where essentially all lignin was chemically removed (e.g., CPs). The diaper, which is not only made from chemical pulp but also contains some gel and plastic, exhibited limited biodegradability. The extent of biogenic carbon conversion varied from 21 to 96% among papers, which contrasts with the uniform assumption of 50% by the Intergovernmental Panel on Climate Change (IPCC) for all degradable materials discarded in landfills. Biochemical methane potential tests also showed that the solids to liquid ratio used in the test can influence the results. - Highlights: • Decomposition of major paper products measured under simulated landfill conditions • Varied decomposition behaviors across paper types governed by pulp types • A copy paper made from eucalyptus exhibited inhibited decomposition.

78 FR 62584 - Certain Lined Paper Products From India: Preliminary Results of Countervailing Duty...

Science.gov (United States)

2013-10-22

... DEPARTMENT OF COMMERCE International Trade Administration [C-533-844] Certain Lined Paper Products... (CVD) order on certain lined paper products from India. The period of review (POR) is January 1, 2011...-1503. Scope of the Order The merchandise subject to the Lined Paper Order \\1\\ is certain lined paper...

Feasibility of paper mulches in crop production —a review

Directory of Open Access Journals (Sweden)

Tapani Haapala

2014-02-01

Full Text Available   Mulching has become an important practice in modern field production. This article reviews the published research on paper mulches and discusses the opportunity that they offer for solving the problems of the immense use of plastics in agriculture and the associated environmental threat. Paper mulches break down naturally after usage and incorporate into the soil. Laying paper mulches in large scale farming is a problem to be solved. The quality of the paper needs to be adapted or improved for mulching purposes, and its price needs to be more competitive with that of plastic mulches. The review shows that there is considerable potential for using paper mulches in agriculture and horticulture.  

76 FR 76123 - Final Results of Expedited Sunset Review of Antidumping Duty Orders: Lined Paper Products From...

Science.gov (United States)

2011-12-06

... Unit, room 7046, of the main Commerce building. In addition, a complete version of the Decision... Producer (percent) Shanghai Lian Li Paper Products Shanghai Lian Li 94.91 Co., Ltd. Paper Products Co., Ltd. Shanghai Lian Li Paper Products Sentian Paper 94.91 Co., Ltd. Products Co., Ltd. Shanghai Lian Li Paper...

Spatial support of knowledge production in higher education: Research paper

OpenAIRE

van Sprang, H; Groen, BH; van der Voordt, Theo

2013-01-01

This paper explores the impact of the physical and social dimensions of the work environment on satisfaction and perceived productivity of knowledge workers in Dutch universities of applied sciences. The approach took the form of a literature review, multiple case study of six research centres using interviews and logbook analysis, and web-based survey (N = 188). Optimally facilitating knowledge production requires both space for concentration (to support internalisation of knowledge) and spa...

One-step flame synthesis of silver nanoparticles for roll-to-roll production of antibacterial paper

Science.gov (United States)

Brobbey, Kofi J.; Haapanen, Janne; Gunell, Marianne; Mäkelä, Jyrki M.; Eerola, Erkki; Toivakka, Martti; Saarinen, Jarkko J.

2017-10-01

Nanoparticles are used in several applications due to the unique properties they possess compared to bulk materials. Production techniques have continuously evolved over the years. Recently, there has been emphasis on environmentally friendly manufacturing processes. Substrate properties often limit the possible production techniques and, for example; until recently, it has been difficult to incorporate nanoparticles into paper. Chemical reduction of a precursor in the presence of paper changes the bulk properties of paper, which may limit intended end-use. In this study, we present a novel technique for incorporating silver nanoparticles into paper surface using a flame pyrolysis procedure known as Liquid Flame Spray. Papers precoated with mineral pigments and plastic are used as substrates. Silver nanoparticles were analyzed using SEM and XPS measurements. Results show a homogeneous monolayer of silver nanoparticles on the surface of paper, which demonstrated antibacterial properties against E. coli. Paper precoated with plastic showed more nanoparticles on the surface compared to pigment coated paper samples except for polyethylene-precoated paper. The results demonstrate a dry synthesis approach for depositing silver nanoparticles directly onto paper surface in a process which produces no effluents. The production technique used herein is up scalable for industrial production of antibacterial paper.

27 CFR 40.1 - Manufacture of tobacco products, cigarette papers and tubes, and processed tobacco.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Manufacture of tobacco... MANUFACTURE OF TOBACCO PRODUCTS, CIGARETTE PAPERS AND TUBES, AND PROCESSED TOBACCO Scope of Regulations § 40.1 Manufacture of tobacco products, cigarette papers and tubes, and processed tobacco. This part contains...

Waste management from pulp and paper production in the European Union

International Nuclear Information System (INIS)

Monte, M.C.; Fuente, E.; Blanco, A.; Negro, C.

2009-01-01

Eleven million tonnes of waste are produced yearly by the European pulp and paper industry, of which 70% originates from the production of deinked recycled paper. Wastes are very diverse in composition and consist of rejects, different types of sludges and ashes in mills having on-site incineration treatment. The production of pulp and paper from virgin pulp generates less waste but the waste has similar properties to waste from the production of deinked pulp, although with less inorganics. Due to legislation and increased taxes, landfills are quickly being eliminated as a final destination for wastes in Europe, and incineration with energy recovery is becoming the main waste recovery method. Other options such as pyrolysis, gasification, land spreading, composting and reuse as building material are being applied, although research is still needed for optimization of the processes. Due to the large volumes of waste generated, the high moisture content of the waste and the changing waste composition as a result of process conditions, recovery methods are usually expensive and their environmental impact is still uncertain. For this reason, it is necessary to continue research on different applications of wastes, while taking into account the environmental and economic factors of these waste treatments

Decomposition and carbon storage of selected paper products in laboratory-scale landfills.

Science.gov (United States)

Wang, Xiaoming; De la Cruz, Florentino B; Ximenes, Fabiano; Barlaz, Morton A

2015-11-01

The objective of this study was to measure the anaerobic biodegradation of different types of paper products in laboratory-scale landfill reactors. The study included (a) measurement of the loss of cellulose, hemicellulose, organic carbon, and (b) measurement of the methane yields for each paper product. The test materials included two samples each of newsprint (NP), copy paper (CP), and magazine paper (MG), and one sample of diaper (DP). The methane yields, carbon storage factors and the extent of cellulose and hemicellulose decomposition all consistently show that papers made from mechanical pulps (e.g., NPs) are less degradable than those made from chemical pulps where essentially all lignin was chemically removed (e.g., CPs). The diaper, which is not only made from chemical pulp but also contains some gel and plastic, exhibited limited biodegradability. The extent of biogenic carbon conversion varied from 21 to 96% among papers, which contrasts with the uniform assumption of 50% by the Intergovernmental Panel on Climate Change (IPCC) for all degradable materials discarded in landfills. Biochemical methane potential tests also showed that the solids to liquid ratio used in the test can influence the results. Copyright © 2015 Elsevier B.V. All rights reserved.

Performance of improved bacterial cellulose application in the production of functional paper.

Science.gov (United States)

Basta, A H; El-Saied, H

2009-12-01

The purpose of this work was to study the feasibility of producing economic flame retardant bacterial cellulose (BC) and evaluating its behaviour in paper production. This type of BC was prepared by Gluconacetobacter subsp. xylinus and substituting the glucose in the cultivation medium by glucose phosphate as a carbon source; as well as using corn steep liquor as a nitrogen source. The investigated processing technique did not dispose any toxic chemicals that pollute the surroundings or cause unacceptable effluents, making the process environmentally safe. The fire retardant behaviour of the investigated BC has been studied by non-isothermal thermogravimetric analysis (TGA & DTGA). The activation energy of each degradation stage and the order of degradation were estimated using the Coats-Redfern equation and the least square method. Strength, optical properties, and thermogravimetric analysis of BC-phosphate added paper sheets were also tested. The study confirmed that the use of glucose phosphate along with glucose was significant in the high yield production of phosphate containing bacterial cellulose (PCBC1); more so than the use of glucose phosphate alone (PCBC2). Incorporating 5% of the PCBC with wood pulp during paper sheet formation was found to significantly improve kaolin retention, strength, and fire resistance properties as compared to paper sheets produced from incorporating bacterial cellulose (BC). This modified BC is a valuable product for the preparation of specialized paper, in addition to its function as a fillers aid.

Spatial support of knowledge production in higher education : Research paper

NARCIS (Netherlands)

van Sprang, H; Groen, BH; van der Voordt, Theo

2013-01-01

This paper explores the impact of the physical and social dimensions of the work environment on satisfaction and perceived productivity of knowledge workers in Dutch universities of applied sciences. The approach took the form of a literature review, multiple case study of six research centres using

78 FR 13016 - Certain Lined Paper Products From India: Notice of Partial Rescission of Countervailing Duty...

Science.gov (United States)

2013-02-26

... DEPARTMENT OF COMMERCE International Trade Administration [C-533-844] Certain Lined Paper Products... an administrative review of the countervailing duty order on certain lined paper products from India...\\ Petitioners are the Association of American School Paper Suppliers. \\4\\ See petitioners' November 27, 2012...

75 FR 26919 - Certain Crepe Paper Products From the People's Republic of China: Continuation of Antidumping...

Science.gov (United States)

2010-05-13

... DEPARTMENT OF COMMERCE International Trade Administration [A-570-895] Certain Crepe Paper Products... International Trade Commission (``ITC'') that revocation of the antidumping duty order on certain crepe paper... duty order on certain crepe paper products from the PRC pursuant to section 751(c) of the Tariff Act of...

The Papers Printing Quality Complex Assessment Algorithm Development Taking into Account the Composition and Production Technological Features

Science.gov (United States)

Babakhanova, Kh A.; Varepo, L. G.; Nagornova, I. V.; Babluyk, E. B.; Kondratov, A. P.

2018-04-01

Paper is one of the printing system key components causing the high-quality printed products output. Providing the printing companies with the specified printing properties paper, while simultaneously increasing the paper products range and volume by means of the forecasting methods application and evaluation during the production process, is certainly a relevant problem. The paper presents the printing quality control algorithm taking into consideration the paper printing properties quality assessment depending on the manufacture technological features and composition variation. The information system including raw material and paper properties data and making possible pulp and paper enterprises to select paper composition optimal formulation is proposed taking into account the printing process procedure peculiarities of the paper manufacturing with specified printing properties.

Improved coordination of the production cycle in the paper industry : To manage a wide product range and sequence-dependent changeovers

OpenAIRE

Johansson, Carl; Strandberg, Erik

2015-01-01

Today the manufacturing industry is faced with the challenge to stay competitive in an era of shorter product lifecycles and increased product variety. This has forced manufacturing companies to deal with an increased amount of products and more and faster changes to the product line. The same trend can also be seen in the paper industry where bulk products decreasing and more diversified products in smaller lot-sizes increasing, with a greater focus on customer specific products. Traditional...

Availability Evaluation of the serial processes in a Paper Production Industry-A Numerical Approach

Directory of Open Access Journals (Sweden)

Archana Sharma

2010-12-01

Full Text Available The purpose of this research is to compute availability of the process of a paper production industry consisting of four subsystems. Mathematical formulation of the problem is carried out using probability considerations and the governing differential equations are solved using Runge-Kutta method of order four. Availability of the serial process in the paper production industry have been computed for various choice of failure and repair rates of subsystems of this plant.

Impacts of paper sludge and manure on soil and biomass production of willow

International Nuclear Information System (INIS)

Quaye, Amos K.; Volk, Timothy A.; Hafner, Sasha; Leopold, Donald J.; Schirmer, Charles

2011-01-01

Land application of organic wastes to short rotation woody crops (SRWC) can reduce the environmental impacts associated with waste disposal and enhance the productivity of biomass production systems. Understanding the potential impacts of organic amendments however, requires the examination of changes in soil characteristics and plant productivity. This study was conducted to evaluate the effect of paper sludge and dairy manure on biomass production of shrub willow (Salix dasyclados SV1) and to determine the impacts of these amendments on soil chemical properties. Treatments included urea, dairy manure and paper sludge separately and in combination, and a control. These materials were applied in the summer of 2005 to two fields of SV1 at different stages of growth: An old field with one year old shoots on a 10 year old root system and a young field which was beginning regrowth after being coppiced at the end of its first growing season. Foliar nutrient concentrations and soil chemical properties were analyzed at the end of the second growing season after treatment application to determine plant response to the fertilization regimes and to determine the effects of fertilization on soil characteristics. Fertilization did not increase biomass production in either field. However, application of the N-poor paper sludge did not reduce yield either. In general, fertilization did not influence soil or foliar chemistry, although there were some exceptions. The lack of response observed in this study is probably related to the nutrient status of the site or losses of applied nutrients. -- Highlights: → The fertilization treatments did not have any significant effect biomass production. → Application of paper sludge did not reduce willow biomass yield in both fields. → Foliar N concentration of willow crops in this study is in the range considered for optimal growth. → The limited response of foliar nutrients to fertilization indicates that the site was not limited by

Paper production from wild dogwood (Cornus australis L. and the effect of bark on paper properties

Directory of Open Access Journals (Sweden)

Ayhan Gençer

2017-11-01

Full Text Available Generally bark has a negative effect pulp and paper properties. In this study, paper pulp and hand sheets were produced from Wild dogwood (Cornus australis L. using Kraft method. The cooking have been different conditions, chip / solution ratio 1/5, cooking temperature 170±2 °C by taking constant. Kraft method with the Na2S/NaOH, 18/20, 18/15, 18/10, 18/5 performed. Samples were used with and without bark in order to identify the negative impacts of the bark on pulp and paper production. In addition, it has been investigated whether the time of reaching the maximum temperature of K2 cooking is reduced from 120 minutes to 90 minutes, and the time and energy saving can be made. For all of the mechanical properties that were measured and pulp yield, the bark had a negative effect. But, this effect had not significant on mechanical properties at 95% significant level. On the other hand the bark had a negative effect on brightness and positive effects on opacity. These effects had significant at 95% significant level.

Enzymatic saccharification and fermentation of paper and pulp industry effluent for biohydrogen production

Energy Technology Data Exchange (ETDEWEB)

Lakshmidevi, Rajendran; Muthukumar, Karuppan [Department of Chemical Engineering, Alagappa College of Technology Campus, Anna University Chennai, Chennai 600 025 (India)

2010-04-15

Paper and pulp industry effluent was enzymatically hydrolysed using crude cellulase enzyme (0.8-2.2FPU/ml) obtained from Trichoderma reesei and from the hydrolysate biohydrogen was produced using Enterobacter aerogenes. The influence of temperature and incubation time on enzyme production was studied. The optimum temperature for the growth of T. reesei was found to be around 29 C. The enzyme activity of 2.5 FPU/ml was found to produce about 22 g/l of total sugars consisting mainly of glucose, xylose and arabinose. Relevant kinetic parameters with respect to sugars production were estimated using two fraction model. The enzymatic hydrolysate was used for the biohydrogen production using E. aerogenes. The growth data obtained for E. aerogenes were fitted well with Monod and Logistic equations. The maximum hydrogen yield of 2.03 mol H{sub 2}/mol sugar and specific hydrogen production rate of 225 mmol of H{sub 2}/g cell/h were obtained with an initial concentration of 22 g/l of total sugars. The colour and COD of effluent was also decreased significantly during the production of hydrogen. The results showed that the paper and pulp industry effluent can be used as a substrate for biohydrogen production. (author)

75 FR 15415 - Certain Crepe Paper Products From the People's Republic of China: Final Results of Expedited...

Science.gov (United States)

2010-03-29

..., glazed, sequined, embossed, die-cut, and/or flame retardant. Subject crepe paper may be rolled, flat or... DEPARTMENT OF COMMERCE International Trade Administration [A-570-895] Certain Crepe Paper Products...'') initiated a sunset review of the antidumping duty order on certain crepe paper products from the People's...

78 FR 63162 - Certain Lined Paper Products From India: Notice of Partial Rescission and Preliminary Results of...

Science.gov (United States)

2013-10-23

... DEPARTMENT OF COMMERCE International Trade Administration [A-533-843] Certain Lined Paper Products... certain lined paper products (CLPP) from India.\\2\\ The period of review (POR) is September 1, 2011... Petitioners are the Association of American School Paper Suppliers (AASPS) and its individual members. \\2\\ See...

Analytical determination of bisphenol A (BPA) and bisphenol analogues in paper products by GC-MS/MS.

Science.gov (United States)

Jurek, A; Leitner, E

2017-07-01

Bisphenol A (BPA; 4-[2-(4-hydroxyphenyl)propan-2-yl]phenol), a suspected endocrine disruptor with a weak estrogenic activity, is used in a variety of consumer products, including food-contact materials made of paper and cardboard products. Due to restrictions on the use of BPA because of its potential health risks, BPA is gradually being replaced by other bisphenols because no limitations exist for these substances. This study presents a method for the simultaneous analysis of BPA, bisphenol AF (BPAF), bisphenol B (BPB), bisphenol E (BPE), bisphenol F (BPF) and bisphenol S (BPS) in paper and board products using gas chromatography-tandem mass spectrometry (GC-MS/MS). Paper samples were extracted by liquid extraction, as well as by Folch extraction, derivatised with N,O-bis(trimethylsilyl)trifluoroacetamide (BSTFA) and the results compared. The developed method showed good linearity (R 2  > 0.9965) and precision, yielding relative standard deviations (RSDs) of less than 16.6% for reproducibility and 19.8% for repeatability. The limits of detection and limits of quantification for the different bisphenols ranged from 0.23 to 2.70 µg kg - 1 paper and from 0.78 to 9.10 µg kg - 1 paper, respectively. Analysis of different paper products (recycled, virgin fibre) showed that all the analysed bisphenols were present in the samples, except for BPAF and BPB. A calculation of the 'worst-case' scenario assuming a maximum potential migration of 100% of the analytes into food showed that the analysed products can be assumed to be safe regarding the migration of bisphenols.

27 CFR 41.1 - Importation of tobacco products, cigarette papers and tubes, and processed tobacco.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Importation of tobacco products, cigarette papers and tubes, and processed tobacco. 41.1 Section 41.1 Alcohol, Tobacco Products and Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY (CONTINUED) TOBACCO...

78 FR 14514 - Certain Tissue Paper Products From the People's Republic of China: Affirmative Preliminary...

Science.gov (United States)

2013-03-06

... Antidumping Duty Order The tissue paper products subject to this order are cut-to-length sheets of tissue... are produced in India from PRC-origin jumbo rolls and/or cut sheets of tissue paper, and exported from... DEPARTMENT OF COMMERCE International Trade Administration [A-570-894] Certain Tissue Paper...

76 FR 19049 - Certain Tissue Paper Products From the People's Republic of China: Notice of Preliminary Results...

Science.gov (United States)

2011-04-06

... review (POR) of March 1, 2009, to February 28, 2010, with respect to Max Fortune (Vietnam) Paper Products Company Limited (MFVN). MFVN claimed in this administrative review that it made no sales/shipments during... (AFA), that during the POR MFVN made sales/shipments to the United States of tissue paper products...

The interrelationship between environmental goals, productivity improvement, and increased energy efficiency in integrated paper and steel plants

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-06-01

This report presents the results of an investigation into the interrelationships between plant-level productivity, energy efficiency, and environmental improvements for integrated pulp and paper mills and integrated steel mills in the US. Integrated paper and steel plants are defined as those facilities that use some form of onsite raw material to produce final products (for example, paper and paperboard or finished steel). Fully integrated pulp and paper mills produce onsite the pulp used to manufacture paper from virgin wood fiber, secondary fiber, or nonwood fiber. Fully integrated steel mills process steel from coal, iron ore, and scrap inputs and have onsite coke oven facilities.

76 FR 62343 - Certain Lined Paper Products From India: Notice of Preliminary Results of Antidumping Duty...

Science.gov (United States)

2011-10-07

... Lined Paper Products from India: Selection of Respondents for Individual Review'' (Respondent Selection... purposes of determining appropriate product comparisons to U.S. sales. Because Riddhi did not have home market sales of subject merchandise during the POR, all products produced by Riddhi covered by the...

Gamma radiation effects in packaging for sterilization of health products and their constituents paper and plastic film

Science.gov (United States)

B. G. Porto, Karina Meschini; Napolitano, Celia Marina; Borrely, Sueli Ivone

2018-01-01

The integrity of materials containing packaging (natural or synthetic polymers) is essential to keep the aseptic condition of commercialized products (health care products, food and pharmaceuticals). The objective of this paper was to study gamma radiation effects (25 kGy, 40 kGy and 50 kGy) on the main properties of paper and multilayer films (polyester and polyethylene). Paper and multilayer films are components of packaging (pouches) for radiation sterilization containing medical equipment or products. Paper was the more radiation sensitive among the studied materials and radiation effects were more pronounced at brightness, pH, tearing resistance, bursting strength and tensile strength. Concerning plastic film, no pinholes were induced by radiation and the effects on the tensile strength were not significant. Although the seal strength packaging (pouches) decreased according to increasing dose, the sealing integrity was preserved.

75 FR 42067 - Certain Tissue Paper Products From the People's Republic of China: Notice of Continuation of...

Science.gov (United States)

2010-07-20

... stock, towel or napkin stock, paper of a kind used for household or sanitary purposes, cellulose wadding... DEPARTMENT OF COMMERCE International Trade Administration [A-570-894] Certain Tissue Paper... Commission (ITC) that revocation of the antidumping duty order on certain tissue paper products (tissue paper...

Pulp and paper from blue agave waste from tequila production.

Science.gov (United States)

Idarraga, G; Ramos, J; Zuñiga, V; Sahin, T; Young, R A

1999-10-01

Pulping of blue agave waste, from the production of tequila, was evaluated by both chemical and biomechanical pulping processes. Two conventional and two organosolv systems were used to pulp the agave waste under a standard set of conditions. The soda-ethanol process was superior in terms of delignification and pulp properties in comparison to the soda and ethanol organosolv processes for pulping of agave waste; however, the kraft process gave the best strength properties. In general, the strength of the agave waste pulps was rather poor in comparison to wood and other agro-based pulps; however, the tear strength was relatively high. This result is typical of poorly bonded sheets and may be due to the coarseness of the agave fibers and/or loss of hemicelluloses in the steaming process for the tequila production. Fungal treatment of the agave waste with Ceriporiopsis subvermispora reduced the energy consumption for mechanical refining but gave biomechanical pulps with inferior strength properties. The blue agave chemical pulps should be suitable for blending with softwood kraft pulps for publication grade paper.

75 FR 63814 - Certain Lined Paper Products From the People's Republic of China: Notice of Preliminary Results...

Science.gov (United States)

2010-10-18

... consist of hole-punched or drilled filler paper; Three-ring or multiple-ring binders, or notebook organizers incorporating such a ring binder provided that they do not include subject paper; Index cards... DEPARTMENT OF COMMERCE International Trade Administration [A-570-901] Certain Lined Paper Products...

Large-scale production of paper-based Li-ion cells

CERN Document Server

Zolin, Lorenzo

2017-01-01

This book describes in detail the use of natural cellulose fibers for the production of innovative, low-cost, and easily recyclable lithium-ion (Li-ion) cells by means of fast and reliable papermaking procedures that employ water as a solvent. In addition, it proposes specific methods to optimize the safety features of these paper-based cells and to improve the electronic conductivity of the electrodes by means of a carbonization process– an interesting novel technology that enables higher current rate capabilities to be achieved. The in-depth descriptions of materials, methods, and techniques are complemented by the inclusion of a general overview of electrochemical devices and, in particular, of different Li-ion battery configurations. Presenting the outcomes of this important research, the work is of wide interest to electrochemical engineers in both research institutions and industry.

Audio Papers

DEFF Research Database (Denmark)

Groth, Sanne Krogh; Samson, Kristine

2016-01-01

With this special issue of Seismograf we are happy to present a new format of articles: Audio Papers. Audio papers resemble the regular essay or the academic text in that they deal with a certain topic of interest, but presented in the form of an audio production. The audio paper is an extension...

Biorefinery production of poly-3-hydroxybutyrate using waste office paper hydrolysate as feedstock for microbial fermentation.

Science.gov (United States)

Neelamegam, Annamalai; Al-Battashi, Huda; Al-Bahry, Saif; Nallusamy, Sivakumar

2018-01-10

Waste paper, a major fraction of municipal solid waste, has a potential to serve as renewable feedstock for the biorefineries of fuels, chemicals and materials due to rich in cellulose and abundant at low cost. This study evaluates the possibility of waste office paper (WOP) to serve as a potential feedstock for the biorefinery production of poly (3-hydroxybutyrate). In this study, the WOP was pretreated, enzymatically saccharified and the hydrolysate was used for PHB production. The hydrolysate mainly consists of glucose (22.70g/L) and xylose (1.78g/L) and the corresponding sugar yield was about 816mg/g. Ammonium sulphate and C/N ratio 20 were identified as most favorable for high yield of PHB. The batch fermentation of Cupriavidus necator using the pretreated WOP hydrolysate resulted in cell biomass, PHB production and PHB content of 7.74g/L, 4.45g/L and 57.52%, respectively. The volumetric productivity and yield achieved were 0.061g/L/h and 0.210g/g sugar, respectively. The results suggested that WOP could be a potential alternative feedstock for the biorefinery production of bioplastics. Copyright © 2017 Elsevier B.V. All rights reserved.

Efficient production of ethanol from waste paper and the biochemical methane potential of stillage eluted from ethanol fermentation.

Science.gov (United States)

Nishimura, Hiroto; Tan, Li; Sun, Zhao-Yong; Tang, Yue-Qin; Kida, Kenji; Morimura, Shigeru

2016-02-01

Waste paper can serve as a feedstock for ethanol production due to being rich in cellulose and not requiring energy-intensive thermophysical pretreatment. In this study, an efficient process was developed to convert waste paper to ethanol. To accelerate enzymatic saccharification, pH of waste paper slurry was adjusted to 4.5-5.0 with H2SO4. Presaccharification and simultaneous saccharification and fermentation (PSSF) with enzyme loading of 40 FPU/g waste paper achieved an ethanol yield of 91.8% and productivity of 0.53g/(Lh) with an ethanol concentration of 32g/L. Fed-batch PSSF was used to decrease enzyme loading to 13 FPU/g waste paper by feeding two separate batches of waste paper slurry. Feeding with 20% w/w waste paper slurry increased ethanol concentration to 41.8g/L while ethanol yield decreased to 83.8%. To improve the ethanol yield, presaccharification was done prior to feeding and resulted in a higher ethanol concentration of 45.3g/L, a yield of 90.8%, and productivity of 0.54g/(Lh). Ethanol fermentation recovered 33.2% of the energy in waste paper as ethanol. The biochemical methane potential of the stillage eluted from ethanol fermentation was 270.5mL/g VTS and 73.0% of the energy in the stillage was recovered as methane. Integrating ethanol fermentation with methane fermentation, recovered a total of 80.4% of the energy in waste paper as ethanol and methane. Copyright © 2015 Elsevier Ltd. All rights reserved.

Modifications carried out in Heavy Water Plant, Tuticorin for maximising productivity (Paper No. 1.6)

International Nuclear Information System (INIS)

Periakaruppan, M.; Sunderesan, S.; Chellapandi, D.

1992-01-01

Many modifications have been carried out in Heavy Water Plant, Tuticorin, after commissioning of the plant in July 1978. During the initial 4/5 years many teething problems were faced and they have been tackled effectively with suitable modifications which resulted in sustained production from the year 1984 onwards. In this paper some modifications carried out and changes in operational procedures adopted which resulted in achieving sustained production year after year since 1984 are described. (author)

78 FR 57005 - Paper and Paper-Based Packaging Promotion, Research and Information Order

Science.gov (United States)

2013-09-16

... by recycling recovered paper and paper-based packaging products. The separated, moist fibers are then... and other nondurable consumer products such as pharmaceuticals, clothing, footwear and cosmetics... have declined over the past decade.\\11\\ Paperboard is mainly facing competition from plastics, but also...

Scientific Productivity and Academic Promotion: A Study on French and Italian Physicists. NBER Working Paper No. 16341

Science.gov (United States)

Lissoni, Francesco; Mairesse, Jacques; Montobbio, Fabio; Pezzoni, Michele

2010-01-01

The paper examines the determinants of scientific productivity (number of articles and journals' impact factor) for a panel of about 3600 French and Italian academic physicists active in 2004-05. Endogeneity problems concerning promotion and productivity are addressed by specifying a generalized Tobit model, in which a selection probit equation…

75 FR 63806 - Certain Tissue Paper Products From the People's Republic of China: Final Results of the 2008-2009...

Science.gov (United States)

2010-10-18

... Order The tissue paper products covered by this order are cut-to-length sheets of tissue paper having a..., crinkled, embossed, and/or die cut. The tissue paper subject to this order is in the form of cut-to-length... DEPARTMENT OF COMMERCE International Trade Administration [A-570-894] Certain Tissue Paper...

PRODUCTION OF PRINTING AND WRITING PAPER GRADE PULP FROM ELEPHANT GRASS

Directory of Open Access Journals (Sweden)

Marcela Freitas Andrade

2016-09-01

Full Text Available The main goal of this study was to characterize chemically and morphologically elephant grass (Pennisetum purpureum, and evaluate the potential of its fibers for production of printing and writing paper grade pulp. The elephant grass was chemically and morphologically characterized and cooked by the soda process to two different degrees of delignification (kappa 17.5 and 10.6. The resulting pulps were fully bleached by the O-D*-(EP-D sequence and characterized for their beatability, drainability and physical-mechanical properties. The lignin content (20.2% was low, indicating that this grass should be easier to pulp. The morphological analyses of the elephant grass indicated a short fiber material, similar to hardwoods. The soda pulp from elephant grass cooked to kappa number 17.5 presented higher screened yield than 10.6 kappa pulp, with alkali demands of 15.0% and 20.0%, respectively. The total active chlorine required by the 17.5 and 10.6 kappa pulps, were 42.1 and 35.1 kg/odt pulp, respectively, to achieve an ISO brightness of approximately 90.0%. The bleached soda pulps cooked to 17.5 and 10.6 kappa number showed similar refinability and resistance to drainage, but the tensile and burst index were highest for the 17.5 kappa pulp at beating energy consumptions in the range of 0-6 Wh. It was concluded that both 10.6 and 17.5 kappa pulps from elephant grass are suitable for the production of printing and writing paper grade pulps, but the highest kappa 17.5 pulp is more economically attractive given its highest pulping yield, despite the significantly increased of chemical demand for bleaching A produção de papel para impressão e escrita Grau de celulose a partir de capim-elefante.

Paper in the Era of Digitisation

Directory of Open Access Journals (Sweden)

Klemen Možina

2013-09-01

Full Text Available EXTENDED ABSTRACT:The paper has always been and it remains to be the primary information carrier though only 0.1 % of the total information is recorded on this media. The paper production industry has a great impact on the environment which is mostly due to the use of raw materials (wood of conifers and deciduous trees, fillers (CaCO 3, additional materials (dyes, glue, binders, retentionaids, and chemicals (acids and bases. However, the greatest impact on the environmentis caused by the extensive water consumption. To produce 1 ton of paper up to 60 m3 of freshwater are necessary. The water is not the only resource needed in the production cycle. Besides, the consumption of electrical energy (approximately 10,000 MJ/t pap, waste paper (paper represents 35 % of waste, and air pollution (paper production and transport should be taken into consideration. In spite of the above mentioned environmental threats the paper still remains an important element of the everyday life and the use of modern information technology (personal computers, telefax, Internet has increased its demand and consumption. It is important that the paper is produced from natural materials which are later released into environment without significant environmental consequences. The technology of paper recycling and re-use is widely known and a must of any responsible and professional social environment. Digitisation has increased the consumption of electrical energy as a consequence of production, use and reprocessing of different devices. Unlike a written record, a digital record has no permanent value and the electromagnetic field has a negative effect on the digital records. Digital records have to be constantly updated and adjusted to the computer software and hardware. A book and its content represent a treasure and an invaluable part of the cultural heritage. To use a book it is necessary to learn the alphabet whereas to read digital records we need to be computer and

78 FR 187 - Paper and Paper-Based Packaging Promotion, Research and Information Order

Science.gov (United States)

2013-01-02

... separating fibers from wood or by recycling recovered paper and paper-based packaging products. The separated... other nondurable consumer products such as pharmaceuticals, clothing, footwear and cosmetics. Nondurable... plastics, but also from foils and, to a lesser extent, glass. Between 2000 and 2010, U.S. paperboard...

Recycling of Paper and Cardboard

DEFF Research Database (Denmark)

Christensen, Thomas Højlund; Damgaard, Anders

2011-01-01

waste. Recycling of paper and cardboard production waste and postconsumer waste has a long history in the pulp and paper industry. The recycled material now makes up more than half of the raw material used in European pulp and paper industry (ERPC, 2004). This chapter describes briefly how paper...... and cardboard are produced and how waste paper is recycled in the industry. Quality requirements and use of recycled products are discussed, as are the resource and environmental issues of paper recycling....

27 CFR 40.351 - Cigarette papers.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Cigarette papers. 40.351... OF THE TREASURY (CONTINUED) TOBACCO MANUFACTURE OF TOBACCO PRODUCTS, CIGARETTE PAPERS AND TUBES, AND PROCESSED TOBACCO Manufacture of Cigarette Papers and Tubes Taxes § 40.351 Cigarette papers. Cigarette...

27 CFR 41.34 - Cigarette papers.

Science.gov (United States)

2010-04-01

... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Cigarette papers. 41.34... OF THE TREASURY (CONTINUED) TOBACCO IMPORTATION OF TOBACCO PRODUCTS, CIGARETTE PAPERS AND TUBES, AND PROCESSED TOBACCO Taxes Tax Rates § 41.34 Cigarette papers. Cigarette papers are taxed at the following...

Energy accounting of materials, products, processes and services. [Ten papers

Energy Technology Data Exchange (ETDEWEB)

Verbraeck, A [ed.

1976-01-01

Ten papers were presented, namely: Units in Energy Accounting--How Are They Defined, How Are They Measured, by Dr. Malcolm Slesser; Economics of Energy Analysis, by Dr. Thomas Veach Long II; Energy Considerations in Synthetic and Natural Fibers, by Mr. A. H. Woodhead; Energy Accounting in Food Products, by Mr. Gerald Leach; Energy Analysis of Transportation Systems, by Dr. E. J. Tuininga; Energy Accounting of Packaging Materials for Liquids and Their Transport viz Bottles and Pipes, by Mr. A. Bolzinger; Energy Accounting of Steel, by Dr. A. Decker; Energy Accounting of Aluminium, by Dr. D. Altenpohl, T. S. Daugherty, and W. Blum; Energy Requirement of Some Energy Sources, by Dr. P. F. Chapman and Dr. D. F. Hemming; Energy Analysis of Materials and Structures in the Building Industry, by Professor Dr. P. C. Kreijger. A panel discussion in response to a large number of questions was chaired by Professor Dr. W. van Gool. (MCW)

76 FR 47550 - Certain Tissue Paper Products From the People's Republic of China: Notice of Rescission of the...

Science.gov (United States)

2011-08-05

...) Paper Products Company Limited (MFVN) because MFVN had no sales of subject merchandise which entered the... rescission of this review on the basis that it made no sales/shipments during the POR of tissue paper... review of the sales documentation on the record, we found that while MFVN physically ships the tissue...

Medical Countermeasure Product Development - Alternatives Paper

Science.gov (United States)

2014-04-01

Maritime Research Laboratory of the Defence Science and Technology Organisation (DSTO) in 1995 as a Research Scientist. In January 1997 he was promoted... biosecurity role to supply to the Government and the World Health Organisation (WHO). In the future there may be circumstances where there is no... standards to solve national priority CBR or infectious disease threats. The PPP may enable Government to: • access and grow product development

Evaluation of opportunities for heat integration of biomass-based Fischer–Tropsch crude production at Scandinavian kraft pulp and paper mill sites

International Nuclear Information System (INIS)

Ljungstedt, Hanna; Pettersson, Karin; Harvey, Simon

2013-01-01

This study investigates heat integrated production of FT (Fischer–Tropsch) crude, where excess heat from the FT crude plant is delivered to a typical Scandinavian pulp and paper mill that produces fine paper. The sizes of FT crude plants are quantified, when the amount of excess heat from the FT plant exactly matches the heating demand otherwise satisfied by the bark boiler at the mill, considering a number of development pathways at the mill, including various degrees of steam savings and biorefinery options, such as lignin extraction. Performance of integrated production is compared with that of an FT stand-alone plant on the basis of wood fuel-to-FT crude efficiency, GHG (greenhouse gas) emissions balances and FT crude production cost. The results show that there exists a heat integration opportunity for an FT crude plant ranging from 0 up to 350 MW (LHV) of wood fuel depending on the development pathway for the mill. The results indicate higher overall efficiency and a generally lower production cost for the heat integrated, co-located production. Heat integrated production has a larger potential to contribute to GHG emission mitigation, assuming a future generation of grid electricity emitting equal to or less than an NGCC (natural gas combined cycle) power plant. - Highlights: • We investigate opportunities for heat integrated FT crude production at a mill. • Typical kraft pulp and paper mills have a potential for heat integrated production. • We compare the heat integrated production with stand-alone FT crude production. • Higher efficiency and lower production cost for heat integrated production. • Reduction of GHG emissions is strongly dependent on grid electricity emissions

Paper Airplanes: A Classroom Activity

Science.gov (United States)

Painter, Richard A.

1976-01-01

A learning experience is described for upper elementary or junior high students involving the manufacture, transportation, and marketing of a product for consumers. Steps are given and roles are assigned for students to convert raw material (paper) to a finished product (paper airplanes) and to sell it. (AV)

Malaysia; Background Paper

OpenAIRE

International Monetary Fund

1996-01-01

This Background Paper on Malaysia examines developments and trends in the labor market since the mid-1980s. The paper describes the changes in the employment structure and the labor force. It reviews wages and productivity trends and their effects on unit labor cost. The paper highlights that Malaysia’s rapid growth, sustained since 1987, has had a major impact on the labor market. The paper outlines the major policy measures to address the labor constraints. It also analyzes Malaysia’s recen...

Paper based electronics platform

KAUST Repository

Nassar, Joanna Mohammad

2017-07-20

A flexible and non-functionalized low cost paper-based electronic system platform fabricated from common paper, such as paper based sensors, and methods of producing paper based sensors, and methods of sensing using the paper based sensors are provided. A method of producing a paper based sensor can include the steps of: a) providing a conventional paper product to serve as a substrate for the sensor or as an active material for the sensor or both, the paper product not further treated or functionalized; and b) applying a sensing element to the paper substrate, the sensing element selected from the group consisting of a conductive material, the conductive material providing contacts and interconnects, sensitive material film that exhibits sensitivity to pH levels, a compressible and/or porous material disposed between a pair of opposed conductive elements, or a combination of two of more said sensing elements. The method of sensing can further include measuring, using the sensing element, a change in resistance, a change in voltage, a change in current, a change in capacitance, or a combination of any two or more thereof.

Extending the limits of paper recycling - improvements along the paper value chain

Directory of Open Access Journals (Sweden)

A. Blanco

2013-12-01

Full Text Available Aim of study: The purpose of this study is to analyze how paper recycling activities in Europe can be extended through different improvements along the paper value chain. The importance of this study lies in the identification of the present barriers in paper recycling and how they can be overcome.Area of study: Europe.Material and Methods: All the main stages along the paper value chain have been analyzed for possible improvements: collection of recovered paper (availability and quality, sorting of recovered paper, paper production, and printing and converting activities.Main results: To increase paper recycling in Europe the following improvements are necessary. First, it is mandatory to increase the availability of recovered paper through more efficient collection systems (avoiding the use of commingled collection systems and limiting the competition with energy purposes and the exports. Second, it is necessary to extend sorting activities, which can be achieved by reducing sorting costs by the use of automatized sorting systems. Third, there is a need to increase the recyclability of paper products by the commitment of printing and converting industries to use recycling-friendly printing inks and adhesives. Finally, environmental awareness of the citizens is still an important driver for increasing recycling activities, affecting not only recovery but to all the stages along the paper recycling chain.Research highlights: Although the recycling rate in Europe is already very high (68.9%, there is still room to further extend paper recycling activities through different improvements along the paper value chain.Keywords: paper recycling; sustainability; paper value chain; recovered paper; environmental awareness.

Presence of potentially critical substances in waste paper

DEFF Research Database (Denmark)

Pivnenko, Kostyantyn; Eriksson, Eva; Astrup, Thomas Fruergaard

2013-01-01

the process itself as well as the quality or functionality of the final product. Such additives may be re-introduced to the paper production process once waste paper is recycled, leading to their accumulation and spreading in newly manufactured paper and board products. This study aimed at identification...... of the critical additives potentially present in paper products and quantification of a selected group of additives (Mineral Oil Hydrocarbons) in waste paper and board source segregated from Danish municipal solid waste....

Wood and Paper Manufacturing Sectors

Science.gov (United States)

Find EPA regulatory information for the wood product and paper manufacturing sectors, including paper, pulp and lumber. Information includes NESHAPs and effluent guidelines for pulp and paper rulemaking, and compliance guidelines

Production and Properties of Carbon Nanotube/Cellulose Composite Paper

OpenAIRE

Maria, Kazi Hanium; Mieno, Tetsu

2017-01-01

Multiwalled carbon nanotube/cellulose composite papers have been prepared by mixing the cellulose with MWNT/gelatin solution and drying at room temperature. The CNTs form an interconnected network on the cellulose paper and as a result CNT paper sheet exhibits enhanced electrical properties and thermal stabilities. It is found that both sides of CNT paper sheet have the uniform electrical conductivities. The sheet exhibits strong microwave absorption in the microwave range of 10.5 GHz. The CN...

Efficient production and economics of the clean fuel hydrogen. Paper no. IGEC-1-Keynote-Elnashaie

International Nuclear Information System (INIS)

Elnashaie, S.

2005-01-01

This paper/plenary lecture to this green energy conference briefly discusses six main issues: 1) The future of hydrogen economy; 2) Thermo-chemistry of hydrogen production for different techniques of autothermic operation using different feedstocks; 3) Improvement of the hydrogen yield and minimization of reformer size through combining fast fluidization with hydrogen and oxygen membranes together with CO 2 sequestration; 4) Efficient production of hydrogen using novel Autothermal Circulating Fluidized Bed Membrane Reformer (ACFBMR); 5) Economics of hydrogen production; and, 6) Novel gasification process for hydrogen production from biomass. It is shown that hydrogen economy is not a Myth as some people advocate, and that with well-directed research it will represent a bright future for humanity utilizing such a clean, everlasting fuel, which is also free of deadly conflicts for the control of energy sources. It is shown that autothermic production of hydrogen using novel reformers configurations and wide range of feedstocks is a very promising route towards achieving a successful hydrogen economy. A novel process for the production of hydrogen from different renewable biomass sources is presented and discussed. The process combines the principles of pyrolysis with the simultaneous use of catalyst, membranes and CO 2 sequestration to produce pure hydrogen directly from the unit. Some of the novel processes presented are essential components of modern bio-refineries. (author)

Manufacture of a ceramic paper for art applications

Science.gov (United States)

Dölle, K.; Honig, A.; Piatkowski, J.; Kuempel, C.

2018-01-01

Ceramic paper products are mostly used as high temperature ceramic insulation products. They offer an effective solution for most demanding heat management and insulation applications. The objective for this research project was to create a ceramic paper like product that combines the advantages of paper fibers, ceramic filler, and a clay product into one product, which can be produced on a continuous base with a paper machine. The produced ceramic paper product had a ceramic filler level between 59.68% and 78.8% with a basis weight between 322.9 g/m² and 693.7 g/m², and a final moisture content of 58.6% to 44.7% respectively. The wooden fiber served as a support medium for the ceramic filler material during production on the paper machine and during the conversion process into art pieces. During firing in a kiln, the fiber material combusted and the ceramic filler material mixture acts as common pottery clay, holding the desired shape of the art pieces produced.

78 FR 34640 - Certain Lined Paper Products From the People's Republic of China: Preliminary Results and...

Science.gov (United States)

2013-06-10

... be treated as part of the PRC-wide entity; Shanghai Lian Li Paper Products Co., Ltd. (``Lian Li... Hwa Fuh Plastics Co., Ltd./Li Teng Plastics (Shenzhen) Co., Ltd. (``Hwa Fuh/Li Teng'') could not be... Central Records Unit (``CRU''), room 7046 of the main Department of Commerce building. In addition, a...

Higher demand and production in 2004, but growth wavers in 2005 : markets for paper, paperboard and woodpulp, 2004-2005

Science.gov (United States)

Peter J. Ince; Eduard Akim; Bernard Lombard; Tomas Parik

2005-01-01

Global pulp, paper and paperboard markets improved in 2004 and 2005, as indicated by generally higher prices for most pulp, paper and paperboard products in comparison with 2003. While growth in demand was quite robust in 2004, by the end of the first half of 2005, markets appeared more hesitant and prices appeared to waver or reach a plateau. Within the UNECE region,...

Pretreatments for converting wood into paper and chemicals

Science.gov (United States)

William R. Kenealy; Carl J. Houtman; Jose Laplaza; Thomas W. Jeffries; Eric G. Horn

2007-01-01

Biorefining wood into paper and chemicals is not as easy as making a single traditional paper product. Paper is made from the cellulose- containing fractions of wood and processing may remove lignin and hemicellulose components. The yield and composition of the product depend upon the type of paper being produced. The paper process often alters the noncellulose...

The nonlinear relationship between paper recycling and primary pulp requirements : modeling paper production and recycling in Europe

NARCIS (Netherlands)

Schenk, Niels J.; Moll, Henri C.; Potting, Josepha

Waste paper is suitable for recycling back into paper or for incineration for energy recovery. If waste paper is used for recycling, secondary pulp replaces virgin pulp. Fiber recycling is limited, however, because of physical constraints—particularly the breakage of fiber in the recycling

Cognitive ergonomics: the use of mind mapping tool in maintaining productive sector of a Brazilian paper company.

Science.gov (United States)

Mattos, Diego; Mateus, José Roberto; Merino, Eugenio

2012-01-01

The use of mind maps as a method of building knowledge, planning, organizing activities and ideas can be seen in the literature related to ergonomics. The results of such use are relevant and its use in academic area found. However, regarding to its use in industrial environments, studies can't not be found. With this scenario, and based on the perception of the ergonomist about the importance of using methods such as mind maps in support of human cognition, it seems pertinent to its use in industry sectors whose cognitive demand requires. Given these assumptions, this study aimed to apply the method of Mind Maps in Productive Maintenance sector of a Brazilian paper. The Productive Maintenance sector in the Paper Industry has an important contribution to operational performance. With practical Predictive Maintenance, Preventive Maintenance and Corrective Maintenance, the industry advocates to make the machines to produce paper is not to stop producing when they are programmed to do so. Among the practices cited, the Preventive Maintenance is one that leads to pre-determined intervals in order to reduce the possibility of placing the equipment in a condition below the required level of acceptance. Therefore, this article aims to propose using the tool "mental maps" in order to collaborate in planning and implementation of preventive maintenance activities in the sector of mechanical maintenance of a pulp and paper industry in southern Brazil. The study investigated the maintenance sector through its employees, who went through training about the tool and then use it and ergonomists company.

New series of paper pack vending machines; Paper pack jido hanbaiki no shin series

Energy Technology Data Exchange (ETDEWEB)

Ohashi, M. [Fuji Denki Reiki Co. Ltd., Tokyo (Japan); Umino, S. [Fuji Electric Co. Ltd., Tokyo (Japan)

1996-07-10

This paper presents series of paper pack vending machines. These machines may be broadly classified into those of cold drinks and of hot and cold drinks depending on the storage temperature of products. The former is the machine for cooling dairy products at 10{degree}C with a combined stacking by direct-stacked racks and chain-multiracks. The latter is provided with divided storing chambers with each chamber selectively cooled or heated. Products in the hot chamber are canned coffee and the like set at 55{degree}C. The temperature control is performed by a microcomputer. The chain-multiracks are provided with advantages such as capability of handling various kinds of container shapes, storing drinks and foods vertically, replacing products by the change of a shelf attachment with one operation, and storing one liter packs by setting pair columns. The direct-stacked racks are provided with advantages such as versatility of handling various kinds of containers and miniaturization of the mechanism other than the storage part. The installation space was reduced by devising the opening and closing of the door. The control part is capable of setting temperatures differently for cans and paper packs. 7 figs., 1 tab.

Characterization and transformation of an industrial by-product (coated paper sludge into a pozzolanic material

Directory of Open Access Journals (Sweden)

San José, J. T.

2007-03-01

Full Text Available The effective re-use of industrial by-products calls for an understanding of their chemical, mineralogical and physical characteristics. The by-product used in this study was coated paper industry sludge from a plant whose sole prime material is recycled paper. Due to its high organic and calcium carbonate content and the presence of several clayey materials such as talc and kaolinite, incineration conditions had a significant effect on the mineralogy of such sludge. The present study examined the impact of such conditions on the pozzolanic properties of coated paper sludge. Several temperature intervals ranging from 600 to 750 ºC were studied to determine the conditions yielding the most promising pozzolanic properties.La necesidad de dar un correcto uso a los subproductos industriales requiere del conocimiento de sus características, tanto desde un punto de vista químico como mineralógico y físico. El subproducto utilizado para esta investigación es un lodo de papel estucado procedente de la industria papelera, la cual usa como materias primas un 100% de material reciclado. Debido al alto contenido de materia orgánica y carbonato cálcico y a la presencia de diferentes materiales arcillosos, como el talco y la caolinita, las condiciones de calcinación presentan un papel principal en la mineralogía de este lodo. En el actual trabajo se considera el papel que juegan estas condiciones, tiempo y permanencia en horno, en las propiedades puzolánicas del lodo de papel estucado como material cementante. Por esta razón, se estudiaron diferentes intervalos de temperatura, entre 600 y 750 ºC y 2 horas de permanencia en horno con el objetivo de obtener las mejores propiedades puzolánicas.

Transportation fuel production from gasified biomass integrated with a pulp and paper mill – Part A: Heat integration and system performance

International Nuclear Information System (INIS)

Isaksson, Johan; Jansson, Mikael; Åsblad, Anders; Berntsson, Thore

2016-01-01

Production of transportation fuels from biorefineries via biomass gasification has been suggested as a way of introducing renewable alternatives in the transportation system with an aim to reduce greenhouse gas emissions to the atmosphere. By co-locating gasification-based processes within heat demanding industries, excess heat from the gasification process can replace fossil or renewable fuels. The objective of this study was to compare the heat integration potential of four different gasification-based biorefinery concepts with a chemical pulp and paper mill. The results showed that the choice of end-product which was either methanol, Fischer-Tropsch crude, synthetic natural gas or electricity, can have significant impact on the heat integration potential with a pulp and paper mill and that the heat saving measures implemented in the mill in connection to integration of a gasification process can increase the biomass resource efficiency by up to 3%-points. Heat saving measures can reduce the necessary biomass input to the biorefinery by 50% if the sizing constraint is to replace the bark boiler with excess heat from the biorefinery. A large integrated gasification process with excess steam utilisation in a condensing turbine was beneficial only if grid electricity is produced at below 30% electrical efficiency. - Highlights: • Biomass gasification integrated with a pulp and paper mill. • Different sizing constraints of integrated biofuel production. • The biofuel product largely influence the heat integration potential. • An oversized gasifier for increased power production could be favourable.

Method for production of carbon nanofiber mat or carbon paper

Science.gov (United States)

Naskar, Amit K.

2015-08-04

Method for the preparation of a non-woven mat or paper made of carbon fibers, the method comprising carbonizing a non-woven mat or paper preform (precursor) comprised of a plurality of bonded sulfonated polyolefin fibers to produce said non-woven mat or paper made of carbon fibers. The preforms and resulting non-woven mat or paper made of carbon fiber, as well as articles and devices containing them, and methods for their use, are also described.

Circulating fluidized bed reformer-regenerator system for hydrogen production from methane. Paper no. IGEC-1-092

International Nuclear Information System (INIS)

Prasad, P.; Elnashaie, S.S.E.H.

2005-01-01

Steam reforming is presently the principal route for large-scale hydrogen production from natural gas. This paper proposes a novel concept of a reactor-regenerator type circulating fluidized bed (Prasad and Elnashaie, 2002) for efficient production of hydrogen. Carbon is optimally allowed to form on the catalyst in the reactor section through methane cracking and Boudouard coking reactions, and the deactivated catalyst is regenerated in the regenerator by burning off the carbon. This concept of carbon formation and burning cannot be used in a fixed bed configuration but is possible in the proposed novel Circulating Fluidized Bed (CFB) configuration, which employs a reactor-regenerator type of configuration. Allowing both carbon formation and steam reforming to occur simultaneously by introducing steam as part of the feed, gives more than 3 moles hydrogen per mole of methane at almost zero energy consumption. The steam can be fed as water at room temperature, and the hot catalyst returning from the regenerator can be used to vaporize it into steam. This route is the most efficient from both hydrogen yield and energy consumption points of view. This CFB configuration exhibits the bifurcation behavior and the present paper reports an investigation of its static bifurcation characteristics through a rigorous mathematical model. (author)

Mixed waste paper to ethanol fuel

Energy Technology Data Exchange (ETDEWEB)

1991-01-01

The objectives of this study were to evaluate the use of mixed waste paper for the production of ethanol fuels and to review the available conversion technologies, and assess developmental status, current and future cost of production and economics, and the market potential. This report is based on the results of literature reviews, telephone conversations, and interviews. Mixed waste paper samples from residential and commercial recycling programs and pulp mill sludge provided by Weyerhauser were analyzed to determine the potential ethanol yields. The markets for ethanol fuel and the economics of converting paper into ethanol were investigated.

Fiber properties and their influence on paper structure

Science.gov (United States)

Turrado Saucedo, Jose; Ramirez P., R.; Perez R., S.

1997-08-01

When we move our considerations of the components of paper, through the manufacture of paper, to the use of paper, we are analyzing the fundamental properties of paper related to its end uses. Paper as a product has a lot of possible uses and they are increasing, nevertheless it is very important in secondary products like corrugated board, etc. Every year the paper world production has an increase of approximately 1.6%. For the year 1994 it was 268,772,000 tons and during 1995 this production was 277,791,000 t. In Mexico for instance in 1994/2,860,162 tons and 1995/3,047,153 tons plus paper importation is possible to reach a per capita consumption of 35.8 kg. All paper quality kinds demand some special paper properties, which require technology, human resources and fibers properties. Surely there are fields to investigate by comparing the fundamental properties of paper and board with those of other materials, that is the reason why research must be done, despite the recent difficult times. In hard times its done distinction on switch of founds from fundamental to applied research and research for immediate development, this is understandable. Nevertheless, to study the relation between fibers and end use performance could well capture and even create a yet unknown market. Rather than adopt the attitude that 'here is paper, let us find markets for it' such research into the fundamental properties of the product will give one a clearer understanding of how it can satisfy future demands and meet possible future specifications. Because it is in meeting these specifications that the future of the industry must depend, it must be clear that money spent in this way now may not produce immediate quantifiable benefits, but it will produce the essential reserves that will in future be turned to good account by the industry.

A preliminary investigation of Nigerian Gmelina arborea and Bambusa vulgaris for pulp and paper production

CSIR Research Space (South Africa)

Azeez, MA

2015-10-01

Full Text Available stream_source_info Andrew_2015.pdf.txt stream_content_type text/plain stream_size 47628 Content-Encoding UTF-8 stream_name Andrew_2015.pdf.txt Content-Type text/plain; charset=UTF-8 65 Maderas. Ciencia y tecnología....10.2015 66 U n i v e r s i d a d d e l B í o - B í o Maderas. Ciencia y tecnología 18(1): 65 - 78, 2016 Apart from the loss of jobs as a result of the mill closures, the 100% importation of paper products has further...

Review Paper Variations and changes in habitat, productivity ...

African Journals Online (AJOL)

The Kyoga lake system, which is c. 4 m deep, originally had a diverse fish fauna, extensive macrophytes and wetlands. Most (82%) of its water comes from Lake Victoria, is controlled through three dams and has a short residence time of c. 3 months. Physical and chemical factors, plankton productivity and composition vary ...

Pulp and paper demand deteriorates as global economic crisis takes hold : markets for paper, paperboard and woodpulp, 2008-2009

Science.gov (United States)

Peter J. Ince; Eduard L. Akim; Bernard Lombard; Tomas Parik

2009-01-01

Pulp and paper production and consumption in both Europe and North America declined in 2008 and 2009 as the global economic crisis took hold. In early 2009, leading trade associations were reporting year-over-year declines of 17% in total paper and paperboard production in both Europe and the United States, considerably more than the 2008 drop. Capacity-utilization...

Rapid Scientific Promotion of Scientific Productions in Stem Cells According to The Indexed Papers in The ISI (web of knowledge).

Science.gov (United States)

Alijani, Rahim

2015-01-01

In recent years emphasis has been placed on evaluation studies and the publication of scientific papers in national and international journals. In this regard the publication of scientific papers in journals in the Institute for Scientific Information (ISI) database is highly recommended. The evaluation of scientific output via articles in journals indexed in the ISI database will enable the Iranian research authorities to allocate and organize research budgets and human resources in a way that maximises efficient science production. The purpose of the present paper is to publish a general and valid view of science production in the field of stem cells. In this research, outputs in the field of stem cell research are evaluated by survey research, the method of science assessment called Scientometrics in this branch of science. A total of 1528 documents was extracted from the ISI database and analysed using descriptive statistics software in Excel. The results of this research showed that 1528 papers in the stem cell field in the Web of Knowledge database were produced by Iranian researchers. The top ten Iranian researchers in this field have produced 936 of these papers, equivalent to 61.3% of the total. Among the top ten, Soleimani M. has occupied the first place with 181 papers. Regarding international scientific participation, Iranian researchers have cooperated to publish papers with researchers from 50 countries. Nearly 32% (452 papers) of the total research output in this field has been published in the top 10 journals. These results show that a small number of researchers have published the majority of papers in the stem cell field. International participation in this field of research unacceptably low. Such participation provides the opportunity to import modern science and international experience into Iran. This not only causes scientific growth, but also improves the research and enhances opportunities for employment and professional development. Iranian

Improved biohydrogen production and treatment of pulp and paper mill effluent through ultrasonication pretreatment of wastewater

International Nuclear Information System (INIS)

Hay, Jacqueline Xiao Wen; Wu, Ta Yeong; Juan, Joon Ching; Md Jahim, Jamaliah

2015-01-01

Highlights: • Ultrasonication facilitated the reuse of PPME in biohydrogen production. • Ultrasonication at an amplitude of 60% for 45 min produced the highest biohydrogen. • Ultrasonication increased the solubilization of PPME. • Higher net savings were obtained in pretreated PPME compared to raw PPME. - Abstract: Pulp and paper mill effluent (PPME), a rich cellulosic material, was found to have great potential for biohydrogen production through a photofermentation process. However, pretreatments were needed for degrading the complex structure of PPME before biohydrogen production. The aim of this study was to gain further insight into the effect of an ultrasonication process on PPME as a pretreatment method and on photofermentative biohydrogen production using Rhodobacter sphaeroides NCIMB. The ultrasonication amplitudes and times were varied between 30–90% and 15–60 min, respectively, and no dilution or nutrient supplementation was introduced during the biohydrogen production process. A higher biohydrogen yield, rate, light efficiency and COD removal efficiency were attained in conditions using ultrasonicated PPME. Among these different pretreatment conditions, PPME with ultrasonication pretreatment employing an amplitude of 60% and time of 45 min (A60:T45) gave the highest yield and rate of 5.77 mL H_2/mL medium and 0.077 mL H_2/mL h, respectively, while the raw PPME without ultrasonication showed a significantly lower yield and rate of 1.10 mL H_2/mL medium and 0.015 mL H_2/mL h, respectively. The results of this study demonstrated the potential of using ultrasonication as a pretreatment for PPME because the yield and rate of biohydrogen production were highly enhanced compared to the raw PPME. Economic analysis was also performed in this study, and in comparison with raw PPME, the highest net saving was $0.2132 for A60:T45.

Paper recycling and social policy. [United Kingdom

Energy Technology Data Exchange (ETDEWEB)

Turner, R K; Grace, R

1976-12-01

The most promising new source of paper for recycling is the household and small commercial business, whose waste papers can be processed if the paper and board industry is willing to invest capital to develop the facilities and the technology needed to upgrade indigenous fibers. Cost-benefit analyses in the United Kingdom indicate that support of this type of paper recycling has more merit than a buffer stock scheme. Efforts to conserve virgin materials by increasing the use of secondary materials could be further strengthened by taxes on the disposal of virgin materials. Paper recycling policies should include a range of sources, from discarded post-consumer waste paper and boxes to the release and use of energy by incineration, pyrolysis, and hydrolysis. Waste availability is influenced by product durability, replacement by other products (such as plastic wrap for paper), industry maturity, and social attitudes. Public acceptance of lower-quality paper products and improved technology to remove ink and color should combine to make recycling more feasible. Efforts to develop the household and commercial sector will result in lower import requirements for wood pulp and an improved balance of payments for the United Kingdom. Recycled fibers require less water and energy to process, but the process wastes introduce environmental pollutants. Short- and long-term forecasts show a growth rate trend that varies with paper grade and corresponds with general economic growth. (35 references) (DCK)

A review paper on offline inspection of finished and semi-finished products and emerging research directions

Directory of Open Access Journals (Sweden)

Babar Ramzan Muhammad

2016-01-01

Full Text Available Organizations want to focus on product quality along with productivity to get their competitive advantage in global market. In order to achieve this aim, quality management system and its different aspects are becoming more valuable than before. This study has considered quality control and its activities with specific focus on offline inspection. The objective of this study is to provide a literature review that identifies different models and methodologies, developed for offline inspection under different manufacturing and inspection conditions. This review is based on research work accepted by international journals and published in the years from 2000 to 2016. These studies are classified into six groups on the basis of their research objectives, model developed, adopted methodologies, and research outcomes. This review paper also gives а brief look at the offline inspection to propose future research opportunities and emerging trends. The proposed research directions can be helpful in developing new models or modifying the existing models to improve the performance of offline inspection.

Neutralization of acid mine drainage using the final product from CO2 emissions capture with alkaline paper mill waste

International Nuclear Information System (INIS)

Perez-Lopez, Rafael; Castillo, Julio; Quispe, Dino; Nieto, Jose Miguel

2010-01-01

In this study, experiments were conducted to investigate the applicability of low-cost alkaline paper mill wastes as acidity neutralizing agents for treatment of acid mine drainage (AMD). Paper wastes include a calcium mud by-product from kraft pulping, and a calcite powder from a previous study focused on sequestering CO 2 by carbonation of calcium mud. The neutralization process consisted of increase of pH by alkaline additive dissolution, decrease of metals solubility and precipitation of gypsum and poorly crystallized Fe-Al oxy-hydroxides/oxy-hydroxysulphates, which acted as a sink for trace elements to that extent that solutions reached the pre-potability requirements of water for human consumption. This improvement was supported by geochemical modelling of solutions using PHREEQC software, and observations by scanning electron microscope and X-ray diffraction of reaction products. According to PHREEQC simulations, the annual amount of alkaline additive is able to treat AMD (pH 3.63, sulphate 3800 mg L -1 , iron 348 mg L -1 ) with an average discharge of about 114 and 40 L s -1 for calcium mud and calcite powder, respectively. Likewise, given the high potential of calcium mud to sequester CO 2 and of resulting calcite powder to neutralize AMD, paper wastes could be a promising solution for facing this double environmental problem.

Electronic publishing of SPE papers

International Nuclear Information System (INIS)

Perdue, J.M.

1992-01-01

This paper reports that the SPE is creating an electronic index to over 25,000 technical papers and will produce a CD-ROM as an initial product. This SPE CD-ROM Masterdisc will be available at the SPE Annual Meeting in Washington, D.C. on October 4-7, 1992. The SPE Board has appointed an Ad Hoc Committee on Electronic Publishing to coordinate and oversee this project and to recommend authoring standards for submitting SPE papers electronically in the future

STRUCTURE CONTROL FOR DIFFERENT TYPES OF PAPER BY ATOMIC FORCE MICROSCOPY

Directory of Open Access Journals (Sweden)

M. V. Zhukov

2014-01-01

Full Text Available The paper deals with the precision control for the parameters of manufactured paper production, such as various kinds of paper and photo paper for printing. Research of untreated, matte, glossy and laminated paper is conducted by atomic force microscopy by means of educational and scientific scanning probe microscope NanoEducator LE in the framework of this paper. Visualization of characteristic structure for each type of studied paper was conducted, histogram of roughness was obtained, and average roughness of height differences was defined. A laminated paper has got the lowest roughness (Ra of about 70 nm and glossy paper has got Ra of about 170 nm; roughness of untreated paper with cellulose fibers is about 530- 540 nm, and matte paper has got the highest roughness parameters (Ra about 670-680 nm. Scanning probe microscopy application for parameters monitoring of cellulosic paper production is shown to give the possibility of such microscopy type application in the production of paper products and high-precision control of its parameters.

A low cost, safe, disposable, rapid and self-sustainable paper-based platform for diagnostic testing: lab-on-paper

International Nuclear Information System (INIS)

Costa, M N; Veigas, B; Jacob, J M; Santos, D S; Martins, R; Fortunato, E; Gomes, J; Inácio, J; Baptista, P V

2014-01-01

There is a strong interest in the use of biopolymers in the electronic and biomedical industries, mainly towards low-cost applications. The possibility of developing entirely new kinds of products based on cellulose is of current interest, in order to enhance and to add new functionalities to conventional paper-based products. We present our results towards the development of paper-based microfluidics for molecular diagnostic testing. Paper properties were evaluated and compared to nitrocellulose, the most commonly used material in lateral flow and other rapid tests. Focusing on the use of paper as a substrate for microfluidic applications, through an eco-friendly wax-printing technology, we present three main and distinct colorimetric approaches: (i) enzymatic reactions (glucose detection); (ii) immunoassays (antibodies anti-Leishmania detection); (iii) nucleic acid sequence identification (Mycobacterium tuberculosis complex detection). Colorimetric glucose quantification was achieved through enzymatic reactions performed within specific zones of the paper-based device. The colouration achieved increased with growing glucose concentration and was highly homogeneous, covering all the surface of the paper reaction zones in a 3D sensor format. These devices showed a major advantage when compared to the 2D lateral flow glucose sensors, where some carryover of the coloured products usually occurs. The detection of anti-Leishmania antibodies in canine sera was conceptually achieved using a paper-based 96-well enzyme-linked immunosorbent assay format. However, optimization is still needed for this test, regarding the efficiency of the immobilization of antigens on the cellulose fibres. The detection of Mycobacterium tuberculosis nucleic acids integrated with a non-cross-linking gold nanoprobe detection scheme was also achieved in a wax-printed 384-well paper-based microplate, by the hybridization with a species-specific probe. The obtained results with the above

Comparative life cycle assessments: The case of paper and digital media

Energy Technology Data Exchange (ETDEWEB)

Bull, Justin G., E-mail: jgbull@gmail.com; Kozak, Robert A., E-mail: rob.kozak@ubc.ca

2014-02-15

The consumption of the written word is changing, as media transitions from paper products to digital alternatives. We reviewed the life cycle assessment (LCA) research literature that compared the environmental footprint of digital and paper media. To validate the role of context in influencing LCA results, we assessed LCAs that did not compare paper and print, but focused on a product or component that is part of the Information and Communication Technology (ICT) sector. Using a framework that identifies problems in LCA conduct, we assessed whether the comparative LCAs were accurate expressions of the environmental footprints of paper and print. We hypothesized that the differences between the product systems that produce paper and digital media weaken LCA's ability to compare environmental footprints. We also hypothesized that the characteristics of ICT as an industrial sector weaken LCA as an environmental assessment methodology. We found that existing comparative LCAs offered problematic comparisons of paper and digital media for two reasons — the stark material differences between ICT products and paper products, and the unique characteristics of the ICT sector. We suggested that the context of the ICT sector, best captured by the concept of “Moore's Law”, will continuously impede the ability of the LCA methodology to measure ICT products. -- Highlights: • We review the LCA research that compares paper and digital media. • We contrast the comparative LCAs with LCAs that examine only digital products. • Stark differences between paper and digital media weakens LCA findings. • Digital products in general challenge the LCA method's reliability. • Continuous innovation and global nature of digital products impedes LCA methodology.

Comparative life cycle assessments: The case of paper and digital media

International Nuclear Information System (INIS)

Bull, Justin G.; Kozak, Robert A.

2014-01-01

The consumption of the written word is changing, as media transitions from paper products to digital alternatives. We reviewed the life cycle assessment (LCA) research literature that compared the environmental footprint of digital and paper media. To validate the role of context in influencing LCA results, we assessed LCAs that did not compare paper and print, but focused on a product or component that is part of the Information and Communication Technology (ICT) sector. Using a framework that identifies problems in LCA conduct, we assessed whether the comparative LCAs were accurate expressions of the environmental footprints of paper and print. We hypothesized that the differences between the product systems that produce paper and digital media weaken LCA's ability to compare environmental footprints. We also hypothesized that the characteristics of ICT as an industrial sector weaken LCA as an environmental assessment methodology. We found that existing comparative LCAs offered problematic comparisons of paper and digital media for two reasons — the stark material differences between ICT products and paper products, and the unique characteristics of the ICT sector. We suggested that the context of the ICT sector, best captured by the concept of “Moore's Law”, will continuously impede the ability of the LCA methodology to measure ICT products. -- Highlights: • We review the LCA research that compares paper and digital media. • We contrast the comparative LCAs with LCAs that examine only digital products. • Stark differences between paper and digital media weakens LCA findings. • Digital products in general challenge the LCA method's reliability. • Continuous innovation and global nature of digital products impedes LCA methodology

Chemical pulping of waste pineapple leaves fiber for kraft paper production

Directory of Open Access Journals (Sweden)

Waham Ashaier Laftah

2015-07-01

Full Text Available The main objective of this study is to evaluate the implementation of acetone as a pulping agent for pineapple leaves. Mixtures of water and acetone with concentration of 1%, 3%, 5%, 7%, and 10% were used. The effects of soaking and delignification time on the paper properties were investigated. Thermal and physical properties of paper sheet were studied using thermogravimetric analysis (TGA and tearing resistance test respectively. The morphological properties were observed using microscope at 200× magnification. The paper sheet produced from pulping with 3% acetone concentration shows the highest mechanical properties. Papers strength was improved by increasing the delignification time. The delignification time was reduced by cooking the pineapple leaves at a temperature of 118 °C under applied pressure of 80 kPa which has remarkable effect on paper strength.

Guatemalan women's paper making co-op.

Science.gov (United States)

Stewart, B M

1999-01-01

Founded in 1992, is an independent grassroots organization whose goal is to assist community development, health, education, clean water and income generation. The Q'eqchi' Maya Indians constitute the fourth largest indigenous group located on the banks of Rio Dulce, in the eastern rainforest of Guatemala. Project Ak'Tenamit helped the Q'eqchi' people revive their ancient art of paper making as a viable and self-sustainable source of income. As the material used by the ancient Maya--cork husk and banana stalks--are still abundant, it was decided that this art could be successfully re-introduced. With papermaking, the Q'eqchi women were able to earn money from their own production without even compromising their respective households. Ak'Tenamit was responsible for the distribution of paper making products in stores throughout Guatemala. Although there are still many obstacles confronting these women, the paper making cooperative provides employment opportunities and is indeed a great help to them. They produce a total of 15 different products including bowls, cards, and bookmarks.

Gamma-irradiated cationic starches: Paper surface-sizing agents

International Nuclear Information System (INIS)

Hofreiter, B.T.; Heath, H.D.; Schulte, M.I.; Phillips, B.S.

1981-01-01

Cationic starches, precisely depolymerized by gamma-irradiation ( 60 Co), were dispersed in mild alkali and evaluated as surface sizes for bond paper on a pilot paper machine. The irradiated products had excellent dispersion properties, were well retained on fibers when sized wastepaper (broke) was repulped and had an ability to enhance paper properties that was comparable to that of starch-based materials used commercially. A yellow corn flour, cationized by an essentially dry reaction process recently developed at this Center, was also radiolyzed and evaluated as a size. This latter product was unique in that all drying steps were eliminated in the preparation of a cationic ceral product of reduced viscosity. (orig.) [de

Production of xylanases by mangrove fungi from the Philippines and their application in enzymatic pretreatment of recycled paper pulps.

Science.gov (United States)

Torres, Jeremy Martin O; Dela Cruz, Thomas Edison E

2013-04-01

Mangrove fungi are vastly unexplored for enzymes with industrial application. This study aimed to assess the biocatalytic activity of mangrove fungal xylanases on recycled paper pulp. Forty-four mangrove fungal (MF) isolates were initially screened for xylanolytic activity in minimal medium with corn cob xylan as the sole carbon source. Eight MF were further cultivated under submerged fermentation for the production of crude xylanases. These crude enzymes were then characterized and tested for the pretreatment of recycled paper pulps. Results showed that 93 % of the tested MF isolates exhibited xylanolytic activity in solid medium. In submerged fermentation, salinity improved the growth of the fungal isolates but did not influence xylanase production. The crude xylanases were mostly optimally active at 50 °C and pH 7. Changes in pH had a greater effect on xylanase stability than temperature. More than half of the activity was lost at pH 9 for majority of the crude enzymes. However, two thermophilic xylanases from Fusarium sp. KAWIT-A and Aureobasidium sp. 2LIPA-M and one alkaliphilic xylanase from Phomopsis sp. MACA-J were also produced. All crude enzymes exhibited cellulase activities ranging from 4 to 21 U/ml. Enzymatic pretreatment of recycled paper pulps with 5 % consistency produced 70-650 mg of reducing sugars per gram of pulp at 50 °C after 60 min. The release of high amounts of reducing sugars showed the potential of mangrove fungal crude xylanases in the local paper and pulp industry. The diverse properties shown by the tested crude enzymes also indicate its potential applications to other enzyme-requiring industries.

A multistage pH-control strategy in printing paper production; Monivaiheinen Ph:n saeaetoestrategia painopaperin valmistuksessa - MPKT 08

Energy Technology Data Exchange (ETDEWEB)

Ylen, J.P.; Jutila, P. [Helsinki Univ. of Technology, Otaniemi (Finland)

1998-12-31

The UPM-Kymmene paper mill in Kaipola (Finland) uses recycled paper material, deinked pulp and thermomechanical pulp in the production of different paper grades. The quality changes in the recycled pulp, and especially the varying calcium content, cause problems for those paper machines, which use a mixture of different pulps as raw material. The calcium content and the prevailing pH-value have great influence on the stability of e.g. the resin colloid material of the pulp, and that is why they are important factors in the smooth operation of the machine. The first task in this study was the construction of a reliable method for the pH-measurement of the thick deinked pulp and the development of a satisfactory control based on this measurement. This task was realised using a specific measuring line for the pH-measurement and a linear feedforward-feedback control algorithm. The second task was to create a static three phase pH-simulator, that was verified using real pulps and distribution analysis. Unit operation dynamic flow models were also developed and this part of the study is going on presently. (orig.)

A multistage pH-control strategy in printing paper production; Monivaiheinen Ph:n saeaetoestrategia painopaperin valmistuksessa - MPKT 08

Energy Technology Data Exchange (ETDEWEB)

Ylen, J P; Jutila, P [Helsinki Univ. of Technology, Otaniemi (Finland)

1999-12-31

The UPM-Kymmene paper mill in Kaipola (Finland) uses recycled paper material, deinked pulp and thermomechanical pulp in the production of different paper grades. The quality changes in the recycled pulp, and especially the varying calcium content, cause problems for those paper machines, which use a mixture of different pulps as raw material. The calcium content and the prevailing pH-value have great influence on the stability of e.g. the resin colloid material of the pulp, and that is why they are important factors in the smooth operation of the machine. The first task in this study was the construction of a reliable method for the pH-measurement of the thick deinked pulp and the development of a satisfactory control based on this measurement. This task was realised using a specific measuring line for the pH-measurement and a linear feedforward-feedback control algorithm. The second task was to create a static three phase pH-simulator, that was verified using real pulps and distribution analysis. Unit operation dynamic flow models were also developed and this part of the study is going on presently. (orig.)

A low cost, safe, disposable, rapid and self-sustainable paper-based platform for diagnostic testing: lab-on-paper

Science.gov (United States)

Costa, M. N.; Veigas, B.; Jacob, J. M.; Santos, D. S.; Gomes, J.; Baptista, P. V.; Martins, R.; Inácio, J.; Fortunato, E.

2014-03-01

There is a strong interest in the use of biopolymers in the electronic and biomedical industries, mainly towards low-cost applications. The possibility of developing entirely new kinds of products based on cellulose is of current interest, in order to enhance and to add new functionalities to conventional paper-based products. We present our results towards the development of paper-based microfluidics for molecular diagnostic testing. Paper properties were evaluated and compared to nitrocellulose, the most commonly used material in lateral flow and other rapid tests. Focusing on the use of paper as a substrate for microfluidic applications, through an eco-friendly wax-printing technology, we present three main and distinct colorimetric approaches: (i) enzymatic reactions (glucose detection); (ii) immunoassays (antibodies anti-Leishmania detection); (iii) nucleic acid sequence identification (Mycobacterium tuberculosis complex detection). Colorimetric glucose quantification was achieved through enzymatic reactions performed within specific zones of the paper-based device. The colouration achieved increased with growing glucose concentration and was highly homogeneous, covering all the surface of the paper reaction zones in a 3D sensor format. These devices showed a major advantage when compared to the 2D lateral flow glucose sensors, where some carryover of the coloured products usually occurs. The detection of anti-Leishmania antibodies in canine sera was conceptually achieved using a paper-based 96-well enzyme-linked immunosorbent assay format. However, optimization is still needed for this test, regarding the efficiency of the immobilization of antigens on the cellulose fibres. The detection of Mycobacterium tuberculosis nucleic acids integrated with a non-cross-linking gold nanoprobe detection scheme was also achieved in a wax-printed 384-well paper-based microplate, by the hybridization with a species-specific probe. The obtained results with the above

Characterization of Paper Heterogeneity

Science.gov (United States)

John M. Considine

2014-01-01

Paper and paperboard are the most widely-used green materials in the world because they are renewable, recyclable, reusable, and compostable. Continued and expanded use of these materials and their potential use in new products requires a comprehensive understanding of the variability of their mechanical properties.

INDICATORS FOR SUSTAINABILITY IN INDUSTRIAL SYSTEMS CASE STUDY: PAPER MANUFACTURING

Directory of Open Access Journals (Sweden)

Maria Emiliana Fortună

2011-12-01

Full Text Available The paper describes a framework for promoting sustainability by using indicators for sustainable production. The concept of sustainable production is described as it is viewed by various organisms actions involved in the analysis of the sustainable industrial systems.The measure of sustainability is approached considering indicators of sustainable production, addressing both their dimensions and qualitative and quantitative features.The proposed framework refines the sustainability dimension for a case study which envisages sustainability in paper manufacturing. The analysis takes into account the life cycle analysis for the considered process since the environmental impact is seen as an essential sustainability indicator. Paper recycling and reuse is associated environmental and social costs, as a preferred alternative in waste minimization hierarchy in the manufacturing of non-trees eco-friendly paper.Proactive initiatives to improve the environmental performances of production process are considered as powerful tools for improving the paper manufacturing environmental footprint.

Twelfth ISAS national symposium on analytical techniques for safety and sufficiency of natural resources/products: technical papers

International Nuclear Information System (INIS)

Padmanabhan, P.K.; Page, A.G.

1997-02-01

This volume contains the proceedings of the ISAS (Indian Society of Analytical Scientists) national symposium. The main thrust of the symposium was on new fuel cycle technologies relevant to thorium utilisation programmes. The technologies for different separation processes, techniques for measurements of various process parameters and highly sensitive analytical methods for the determination of the chemical constituents were among the other topics covered. Quality upgradation, standardisation of methods and validation of measurements which are integral parts of product evaluation were also discussed. Papers relevant to INIS are indexed separately

Paper in architecture: Research by design, engineering and prototyping

Directory of Open Access Journals (Sweden)

Jerzy F. Latka

2017-11-01

Full Text Available Paper is a fascinating material that we encounter every day in different variants: tissues, paper towels, packaging material, wall paper or even fillers of doors. Despite radical changes in production technology, the material, which has been known to mankind for almost two thousand years, still has a natural composition, being made up of fibres of plant origin (particularly wood fibres. Thanks to its unique properties, relatively high compression strength and bending stiffness, low production costs and ease of recycling, paper is becoming more and more popular in many types of industry. Mass-produced paper products such as special paper, paperboard, corrugated cardboard, honeycomb panels, tubes and L- and U-shapes are suitable for use as a building material in the broad sense of these words – i.e., in design and architecture. Objects for everyday use, furniture, interior design elements and partitions are just a few examples of things in which paper can be employed. Temporary events such as festivals, exhibitions or sporting events like the Olympics require structures that only need to last for a limited period of time. When they are demolished after a few days or months, their leftovers can have a significant impact on the local environment. In the context of growing awareness of environmental threats and the efforts undertaken by local and international organisations and governments to counter these threats, the use of natural materials that can be recycled after their lifespan is becoming increasingly widespread. Paper and its derivatives fascinate designers and architects, who are always looking for new challenges and trying to meet the market’s demands for innovative and proecological solutions. Being a low-cost and readily available material, paper is suited to the production of emergency shelters for victims of natural and man-made disasters, as well as homeless persons. In order to gain a better understanding of paper’s potential

Scientific papers: A new paradigm

Science.gov (United States)

Reid, George C.

The problem of how to organize and write a scientific paper is a very basic one for most of us. A scientific paper is, after all, the only tangible product of a research scientist and, like all products, will be a failure if not marketed properly to reach its potential buyers. I think that a lack of attention to this “marketing and sales” aspect of research is a serious fault in our community, by which I mean those of us who publish in AGU journals.The potential audience for a scientific paper can be divided roughly into three distinct categories. The first group is usually rather small in number, consisting of fellow scientists working in a very closely related field, and to whom the details of the work are of major importance. The second group is also fellow scientists, but their interest is less sharply focused, and they are concerned with the broad outlines of the work and essential results. The third group is the sponsors and the people who actually pay for the work, whose interest in the details is minimal and they, sadly enough, are often concerned only with the fact that a paper has been published rather than its content.

Antifungal Paper Based on a Polyborneolacrylate Coating

Directory of Open Access Journals (Sweden)

Jiangqi Xu

2018-04-01

Full Text Available Paper documents and products are very susceptible to microbial contamination and damage. Fungi are mainly responsible for those biodeterioration processes. Traditional microbicidal strategies constitute a serious health risk even when microbes are dead. Ideal methods should not be toxic to humans and should have no adverse effects on paper, but should own a broad spectrum, good chemical stability and low cost. In this work, we utilize an advanced antimicrobial strategy of surface stereochemistry by applying a coating of a shallow layer of polyborneolacrylate (PBA, resulting in the desired antifungal performance. The PBA-coated paper is challenged with the most common air-borne fungi growing on paper, Aspergillus niger and Penicillium sp. Ten percent by weight of the coating concentration or a 19-μm infiltration of PBA is sufficient to keep the paper spotless. The PBA coating also exhibits significant inhibition of spores’ germination. After PBA coating, both physicochemical properties (paper whiteness, pH, mechanical strength and inking performance display only slight changes, which are acceptable for general utilization. This PBA coating method is nontoxic, rapid and cost-effective, thus demonstrating great potential for applications in paper products.

Rationalization of water consumption in paper industry

Directory of Open Access Journals (Sweden)

Žarković Darja

2004-01-01

Full Text Available The subject of this paper was to consider the possibilities of economical paper production with rationalization of water consumption. In accordance with the principles of viable development. The pulp & paper industry has had to face global market needs and strict regulation concerning the environment. The basic motive was to provide consistent and high product quality, which is competitive on the market. The pulp & paper industry is one of the largest consumers and pollutants of natural resources. In that light, the rationalization of raw material, water, energy and chemicals consumption with minimization of environmental impact is essential. The European directive on environmental protection obliges producers of pulp & paper to decrease the volume of wastewater and to increase the efficiency treatment. Pulp and paper industry in Serbia and Montenegro will also be faced with the demands for environmental protection. Numerous examples of water consumption rationalization and improvement of water quality in the pulp & paper industry could be found in different literature sources. It is necessary to increase water system closure and implement up-to-date treatment methods. The possibilities for water consumption rationalization, in a real system the paperboard mill UMKA, were examined.

Mathematical modelling of wet paper pressing

NARCIS (Netherlands)

Bežanovic, D.

2005-01-01

The aim of this project is to reduce energy costs in paper production by optimising the process in the press section of a paper machine. In this press section water is squeezed as it passes through the press nip. In a modern press section the moisture content of the sheet after three or four presses

Petro-Safe '95: 6. Annual environmental, safety and health conference and exhibition for the oil, gas and petrochemical industries. Book 3: AFV '95 and Production economics '95 conference papers

International Nuclear Information System (INIS)

Anon.

1995-01-01

Book 3 of the proceedings contains papers from two symposia: Alternative Fueled Vehicles and Production Economics. The Alternative Fueled Vehicles symposium is divided into 3 sections which cover: (1) Hardware and vehicles--school bus fleets and LNG; (2) Fuels and infrastructure--CNG fueling facilities, reformulated gasoline and clean diesel, LNG, future supply trends and domestic energy security, safety issues, and methanol; and (3) Regulatory issues--Clean Cities program, Energy Policy Act and state legislation, Employee Trip Reduction program, and public awareness. The papers in the Production Economics symposium deal with cost-effective methods for marginal field development; economic considerations for offshore platforms and systems; enhanced oil recovery economics; floating production economics; and capital versus operating costs in oil and gas production. Thirty-five papers have been processed separately for inclusion on the data base

Original Paper Evaluation des techniques de production du beurre ...

African Journals Online (AJOL)

The results obtained showed that 31.25% of production units were using the classic churning, followed by Fulani churning processes (25.00%) and direct cooking (25.00%). Industrial technology (UIP1 and UIP2: 06.25%) and churning without roasting (06.25%) are the least practices. Butter yields found are: 49.00% (UIP1); ...

Validation of Extraction Paper Chromatography as a Quality Control Technique for Analysis of Sr-90 in Y-90 Product

International Nuclear Information System (INIS)

Nipavan, Poramatikul; Jatupol, Sangsuriyan; Wiranee, Sriweing

2009-07-01

Full text: Yttrium-90 (Y-90) is a daughter product of strontium-90 (Sr-90). It is specified that there should be less than 2 micro-curie of Sr-90 in Y-90 radiopharmaceuticals. Since both nuclides are beta emitting and there is always a contamination of Y-90 in Sr-90 sample, validation of the analytical method is necessary. In this study, commercial Y-90 and Sr-85 (a gamma emitting isotope of strontium) were used as daughter and mother nuclides, respectively. Extraction paper chromatography technique and its efficient validation method were investigated. Bis-(2-ethylhexyl) diphosphonate was dropped at the origin of chromatography paper and air dried prior to sample drops. Validation of the separation was done by radio-chromatography scanning of the chromatography paper. Their energy spectra were identified in the spectra mode of Packard Cobra II automatic gamma counter, which can differentiate a pure gamma, a pure beta and a mixture of beta and gamma nuclides. Results showed that yttrium acetate remained fixed at the origin of the chromatography paper while strontium acetate moved to the solvent front when developed in saline. In conclusion, the extraction paper chromatography technique can effectively separate Sr-90 from Y-90

Large-scale management of common reed, Phragmites australis, for paper production: A case study from the Liaohe Delta, China

DEFF Research Database (Denmark)

Brix, Hans; Ye, Siyuan; Laws, Edward A.

2014-01-01

The largest Phragmites reed field in the world, with a historical area of approximately 1000 km2, is located in the Liaohe Delta in northeastern China. The Phragmites wetlands are extensively managed to maximize the production of reed biomass for the paper industry. Based on satellite remote sens...

Production of ethanol from a mixture of waste paper and kitchen waste via a process of successive liquefaction, presaccharification, and simultaneous saccharification and fermentation.

Science.gov (United States)

Nishimura, Hiroto; Tan, Li; Kira, Noriko; Tomiyama, Shigeo; Yamada, Kazuo; Sun, Zhao-Yong; Tang, Yue-Qin; Morimura, Shigeru; Kida, Kenji

2017-09-01

Efficient ethanol production from waste paper requires the addition of expensive nutrients. To reduce the production cost of ethanol from waste paper, a study on how to produce ethanol efficiently by adding kitchen waste (potentially as a carbon source, nutrient source, and acidity regulator) to waste paper was performed and a process of successive liquefaction, presaccharification, and simultaneous saccharification and fermentation (L+PSSF) was developed. The individual saccharification performances of waste paper and kitchen waste were not influenced by their mixture. Liquefaction of kitchen waste at 90°C prior to presaccharification and simultaneous saccharification and fermentation (PSSF) was essential for efficient ethanol fermentation. Ethanol at concentrations of 46.6 or 43.6g/l was obtained at the laboratory scale after fermentation for 96h, even without pH adjustment and/or the addition of extra nutrients. Similarly, ethanol at a concentration of 45.5g/l was obtained at the pilot scale after fermentation for 48h. The ethanol concentration of L+PSSF of the mixture of waste paper and kitchen waste was comparable to that of PSSF of waste paper with added nutrients (yeast extract and peptone) and pH adjustment using H 2 SO 4 , indicating that kitchen waste is not only a carbon source but also an excellent nutrient source and acidity regulator for fermentation of the mixture of waste paper and kitchen waste. Copyright © 2017. Published by Elsevier Ltd.

Recycling of paper: accounting of greenhouse gases and global warming contributions.

Science.gov (United States)

Merrild, Hanna; Damgaard, Anders; Christensen, Thomas H

2009-11-01

Greenhouse gas (GHG) emissions have been established for recycling of paper waste with focus on a material recovery facility (MRF). The MRF upgrades the paper and cardboard waste before it is delivered to other industries where new paper or board products are produced. The accounting showed that the GHG contributions from the upstream activities and operational activities, with global warming factors (GWFs) of respectively 1 to 29 and 3 to 9 kg CO(2)-eq. tonne(- 1) paper waste, were small in comparison wih the downstream activities. The GHG contributions from the downstream reprocessing of the paper waste ranged from approximately 490 to 1460 kg CO(2)-eq. tonne( -1) of paper waste. The system may be expanded to include crediting of avoided virgin paper production which would result in GHG contributions from -1270 to 390 kg CO(2)-eq. tonne(- 1) paper waste. It may also be assumed that the wood not used for virgin paper production instead is used for production of energy that in turn is assumed to substitute for fossil fuel energy. This would result in GHG contributions from -1850 to -4400 kg CO(2)-eq. tonne(- 1) of paper waste. These system expansions reveal very large GHG savings, suggesting that the indirect upstream and operational GHG contributions are negligible in comparison with the indirect downstream emissions. However, the data for reprocessing of paper waste and the data for virgin paper production are highly variable. These differences are mainly related to different energy sources for the mills, both in regards to energy form (heat or electricity) and fuel (biomass or fossil fuels).

Understanding the productive author who published papers in medicine using National Health Insurance Database: A systematic review and meta-analysis.

Science.gov (United States)

Chien, Tsair-Wei; Chang, Yu; Wang, Hsien-Yi

2018-02-01

Many researchers used National Health Insurance database to publish medical papers which are often retrospective, population-based, and cohort studies. However, the author's research domain and academic characteristics are still unclear.By searching the PubMed database (Pubmed.com), we used the keyword of [Taiwan] and [National Health Insurance Research Database], then downloaded 2913 articles published from 1995 to 2017. Social network analysis (SNA), Gini coefficient, and Google Maps were applied to gather these data for visualizing: the most productive author; the pattern of coauthor collaboration teams; and the author's research domain denoted by abstract keywords and Pubmed MESH (medical subject heading) terms.Utilizing the 2913 papers from Taiwan's National Health Insurance database, we chose the top 10 research teams shown on Google Maps and analyzed one author (Dr. Kao) who published 149 papers in the database in 2015. In the past 15 years, we found Dr. Kao had 2987 connections with other coauthors from 13 research teams. The cooccurrence abstract keywords with the highest frequency are cohort study and National Health Insurance Research Database. The most coexistent MESH terms are tomography, X-ray computed, and positron-emission tomography. The strength of the author research distinct domain is very low (Gini < 0.40).SNA incorporated with Google Maps and Gini coefficient provides insight into the relationships between entities. The results obtained in this study can be applied for a comprehensive understanding of other productive authors in the field of academics.

Transportation fuel production from gasified biomass integrated with a pulp and paper mill - Part B: Analysis of economic performance and greenhouse gas emissions

International Nuclear Information System (INIS)

Isaksson, Johan; Jansson, Mikael; Åsblad, Anders; Berntsson, Thore

2016-01-01

This paper presents a comparison between four gasification-based biorefineries integrated with a pulp and paper mill. It is a continuation of 'Transportation fuel production from gasified biomass integrated with a pulp and paper mill - Part A: Heat integration and system performance'. Synthesis into methanol, Fischer-Tropsch crude or synthetic natural gas, or electricity generation in a gas turbine combined cycle, were evaluated. The concepts were assessed in terms of GHG (greenhouse gas) emissions and economic performance. Net annual profits were positive for all biofuel cases for an annuity factor of 0.1 in the year 2030; however, the results are sensitive to biofuel selling prices and CO_2_,_e_q charge. Additionally, GHG emissions from grid electricity are highly influential on the results since all biofuel processes require external power. Credits for stored CO_2 might be necessary for processes to be competitive, i.e. storage of separated CO_2 from the syngas conditioning has an important role to play. Without CO_2 storage, the gas turbine case is better than, or equal to, biofuels regarding GHG emissions. Efficiency measures at the host mill prior to heat integration of a gasification process are beneficial from the perspective of GHG emissions, while having a negative impact on the economy. - Highlights: • Biomass gasification integrated with a pulp and paper mill was evaluated. • Greenhouse gas emission consequences and economic performance were assessed. • CCS has an important role to play, both in terms of emissions and economy. • Green electricity production is competitive compared to biofuel production in terms of GHG. • All biofuel cases are profitable in 2030 with assumed level of future policy instruments.

Selective pyrolysis of paper mill sludge by using pretreatment processes to enhance the quality of bio-oil and biochar products

International Nuclear Information System (INIS)

Reckamp, Joseph M.; Garrido, Rene A.; Satrio, Justinus A.

2014-01-01

Paper mill sludge (PMS) is a residual biomass that is generated at paper mills in large quantities. Currently, PMS is commonly disposed in landfills, which causes environmental issues through chemical leaching and greenhouse gas production. In this research, we are exploring the potential of fast pyrolysis process for converting PMS into useful bio-oil and biochar products. We demonstrate that by subjecting PMS to a combination of acid hydrolysis and torrefaction pre-treatment processes it is possible to alter the physicochemical properties and composition of the feedstock material. Fast pyrolysis of pretreated PMS produced bio-oil with significantly higher selectivity to levoglucosenone and significantly reduced the amount of ketone, aldehyde, and organic acid components. Pretreatment of PMS with combined 4% mass fraction phosphoric acid hydrolysis and 220 °C torrefaction processed prior to fast pyrolysis resulted in a 17 times increase of relative selectivity towards levoglucosenone in bio-oil product along with a reduction of acids, ketones, and aldehydes combined from 21 % to 11 %. Biochar, produced in higher yield, has characteristics that potentially make the solid byproduct ideal for soil amendment agent or sorbent material. This work reveals a promising process system to convert PMS waste into useful bio-based products. More in-depth research is required to gather more data information for assessing the economic and sustainability aspects of the process. - Highlights: • Acid hydrolysis and torrefaction reduce bio-oil yield, but improve quality. • Dilute acid conditions provide optimal treatment for bio-oil quality and yield. • Pyrolysis of treated PMS produces high selectivity to levoglucosenone formation. • Treated PMS produces bio-oil with reduced acid, ketone, and aldehyde content. • Pyrolysis of treated PMS produces biochar with low volatile matter in high yield

NANOTECHNOLOGY WHITE PAPER | Science Inventory | US ...

Science.gov (United States)

Nanotechnology is the science of manipulating materials at the atomic and molecular level to develop new or enhanced materials and products. In December 2004, EPA’s Science Policy Council created a cross-Agency workgroup to identify and describe the issues EPA must address to ensure protection of human health and the environment as this new technology is developed. The draft white paper on nanotechnology is the product of the workgroup. The draft white paper describes the technology, and provides a discussion of the potential environmental benefits of nanotechnology and its applications that can foster sustainable use of resources. Risk management issues and the Agency’s statutory mandates are outlined, followed by an extensive discussion of risk assessment issues. The paper identifies research needs for both environmental applications and implications of nanotechnology and concludes with recommendations on next steps for addressing science policy issues and research needs. Supplemental information is provided in a number of appendices. The Agency will use the white paper to address research needs and risk assessment issues concerning nanotechnology. The draft white paper will undergo independent expert review, which will be conducted in the February time frame. All public comments received by January 31, 2006 will be submitted to the external review panel for their consideration. Comments received beyond that time will be considered by EPA. Follo

Chemical pulping of waste pineapple leaves fiber for kraft paper production

OpenAIRE

Laftah, Waham Ashaier; Abdul Rahaman, Wan Aizan Wan

2015-01-01

The main objective of this study is to evaluate the implementation of acetone as a pulping agent for pineapple leaves. Mixtures of water and acetone with concentration of 1%, 3%, 5%, 7%, and 10% were used. The effects of soaking and delignification time on the paper properties were investigated. Thermal and physical properties of paper sheet were studied using thermogravimetric analysis (TGA) and tearing resistance test respectively. The morphological properties were observed using microscope...

Paper and pulp output continues to climb in Europe and Russia, but falls in North America : markets for paper, paperboard and woodpulp, 2006-2007

Science.gov (United States)

Eduard Akim; Peter J. Ince; Bernard Lombard; Tomas Parik

2007-01-01

Overall in the UNECE region in 2006, paper and paperboard consumption, production and trade continued growing, with gains in Europe and the CIS, but a downturn in North America. North American pulp and paper production and consumption decreased slightly in 2006 and early 2007, in part due to the slowdown in United States housing construction and its subsequent economic...

Sustainable and resource efficient intensivation of crop production - Perspectives of agro-ecosystem research Policy paper of the DFG Senate Commission on Agroecosystem Research

NARCIS (Netherlands)

Wolters, V.; Isselstein, J.; Stützel, H.; Ordon, F.; Haaren, von C.; Schlecht, E.; Wesseler, J.H.H.; Birner, R.; Lützow, von M.; Brüggemann, N.; Diekkrüger, B.; Fangmeier, A.; Flessa, H.; Kage, H.; Kaupenhohann, M.; Kögel-Knabner, I.; Mosandl, R.; Seppelt, R.

2014-01-01

With its policy paper the Senate Commission on Agro-ecosystemResearch of the Deutsche Forschungsgemeinschaft(DFG) summarizes potential benefits of basic researchfor the sustainable intensification of crop production. Agro-ecosystems critically contribute to fulfilling the need forincreasing food and

Superhydrophobic paper in the development of disposable labware and lab-on-paper devices.

Science.gov (United States)

Sousa, Maria Peixoto; Mano, João Filipe

2013-05-01

Traditionally in superhydrophobic surfaces history, the focus has frequently settled on the use of complex processing methodologies using nonbiodegradable and costly materials. In light of recent events on lab-on-paper emergence, there are now some efforts for the production of superhydrophobic paper but still with little development and confined to the fabrication of flat devices. This work gives a new look at the range of possible applications of bioinspired superhydrophobic paper-based substrates, obtained using a straightforward surface modification with poly(hydroxybutyrate). As an end-of-proof of the possibility to create lab-on-chip portable devices, the patterning of superhydrophobic paper with different wettable shapes is shown with low-cost approaches. Furthermore, we suggest the use of superhydrophobic paper as an extremely low-cost material to design essential nonplanar lab apparatus, including reservoirs for liquid storage and manipulation, funnels, tips for pipettes, or accordion-shaped substrates for liquid transport or mixing. Such devices take the advantage of the self-cleaning and extremely water resistance properties of the surfaces as well as the actions that may be done with paper such as cut, glue, write, fold, warp, or burn. The obtained substrates showed lower propensity to adsorb proteins than the original paper, kept superhydrophobic character upon ethylene oxide sterilization and are disposable, suggesting that the developing devices could be especially adequate for use in contact with biological and hazardous materials.

Paper reutilization to manufacture plasterboard

International Nuclear Information System (INIS)

Calixto, M.K.; Medeiros, I.A.; Lima, R.C.; Araujo, Y.C.F.; Lima, E.M.C. de

2016-01-01

The changes in the planet have accelerated the discussion about environmental preservation and the pursuit for sustainable solutions aiming the human development. In the civil construction, the residue recovery, not only contribute to sustainability but also relieves the consumption of raw material and for all this the search for new products in this new twist is in the center of global technological research. The goal of this work is to obtain plasterboard incorporating discarded paper in the educational environment. In this study, the plaster was characterized initially by X-ray diffraction and thermals analysis (TG e DTA). It was prepared a paste of plaster and processed paper varying the paper amount in two proportions with 10% and 50% respectively, and was utilized the plaster/water factor equals to 0,7. The plaster - paper mixtures were characterized about the setting time and compressive strength. The results indicated that the increase in paper content led to the decreased resistance. (author)

Pulp and paper production from Spruce wood with kraft and ...

African Journals Online (AJOL)

STORAGESEVER

2010-03-15

Mar 15, 2010 ... optical properties of resultant paper were included to determine the properties of these pulp samples. ... pulping compounds in the kraft method are Na2S and .... Scanning electron microscope (SEM) measurement of pulp.

Nuclear power production: The financial costs. Background paper

International Nuclear Information System (INIS)

Berg, P.

1993-11-01

For many years, the Canadian nuclear industry has priced itself on its ability to provide safe, reliable and low-cost electricity to consumers. While nuclear power has indeed proved to be a relatively safe generator of electricity, its performance with respect to reliability and cost has declined noticeably in recent years. This paper documents the deteriorating cost performance of the industry, in comparison with that of its traditional competitor in power generation. It also breaks down the total costs into its component parts, assessing the key factors underlying the trends that are worsening the competitive position of the industry: a rise in initial capital costs, unanticipated technical difficulties resulting in additional capital costs, and the increasing operating expenses associated with poorer-than-expected reactor performance. (author). 8 refs., 2 tabs., 1 fig

Paper, paperboard and woodpulp markets, 2010-2011

Science.gov (United States)

Peter Ince; Eduard Akim; Bernard Lombard; Tomas Parik; Anastasia Tolmatsova

2011-01-01

Paper and paperboard output rebounded along with overall industrial production in both Europe and the United States, but has not yet fully recovered to the peak levels of 2007-2008. Generally more robust market conditions prevailed from 2010 to early 2011, with higher consumption and prices for most pulp, paper and paperboard commodities. Prices reached a plateau by...

The Effects of Aging on Faculty Productivity. ASHE 1985 Annual Meeting Paper.

Science.gov (United States)

Kallio, Ruth E.; Ging, Terry J.

The relationship between productivity and aging in the context of the college faculty roles of teaching, research, and service is considered, based on a literature review on worker and faculty productivity and on theories of aging (i.e., biological, physiological, psychological, and sociological perspectives). It is concluded that faculty…

Printability of papers recycled from toner and inkjet-printed papers after deinking and recycling processes.

Science.gov (United States)

Karademir, Arif; Aydemir, Cem; Tutak, Dogan; Aravamuthan, Raja

2018-04-01

In our contemporary world, while part of the fibers used in the paper industry is obtained from primary fibers such as wood and agricultural plants, the rest is obtained from secondary fibers from waste papers. To manufacture paper with high optical quality from fibers of recycled waste papers, these papers require deinking and bleaching of fibers at desired levels. High efficiency in removal of ink from paper mass during recycling, and hence deinkability, are especially crucial for the optical and printability quality of the ultimate manufactured paper. In the present study, deinkability and printability performance of digitally printed paper with toner or inkjet ink were compared for the postrecycling product. To that end, opaque 80 g/m 2 office paper was digitally printed under standard printing conditions with laser toner or inkjet ink; then these sheets of paper were deinked by a deinking process based on the INGEDE method 11 p. After the deinking operation, the optical properties of the obtained recycled handsheets were compared with unprinted (reference) paper. Then the recycled paper was printed on once again under the same conditions as before with inkjet and laser printers, to monitor and measure printing color change before and after recycling, and differences in color universe. Recycling and printing performances of water-based inkjet and toner-based laser printed paper were obtained. The outcomes for laser-printed recycled paper were better than those for inkjet-printed recycled paper. Compared for luminosity Y, brightness, CIE a* and CIE b* values, paper recycled from laser-printed paper exhibited higher value than paper recycled from inkjet-printed paper.

Corrosion/95 conference papers

International Nuclear Information System (INIS)

Anon.

1995-01-01

The papers in this conference represent the latest technological advances in corrosion control and prevention. The following subject areas are covered: cathodic protection in natural waters; materials for fossil fuel combustion and conversion systems; modern problems in atmospheric corrosion; innovative ideas for controlling the decaying infrastructure; deposits and their effects on corrosion in industry; volatile high temperature and non aqueous corrosion inhibitors; corrosion of light-weight and precoated metals for automotive application; refining industry corrosion; corrosion in pulp and paper industry; arctic/cold weather corrosion; materials selection for waste incinerators and associated equipment; corrosion measurement technology; environmental cracking of materials; advancing technology in the coating industry; corrosion in gas treating; green inhibition; recent advances in corrosion control of rail equipment; velocity effects and erosion corrosion in oil and gas production; marine corrosion; corrosion of materials in nuclear systems; underground corrosion control; corrosion in potable and industrial water systems in buildings and its impact on environmental compliance; deposit related boiler tube failures; boiler systems monitoring and control; recent developments and experiences in reactive metals; microbiologically influenced corrosion; corrosion and corrosion control for steel reinforced concrete; international symposium on the use of 12 and 13 Cr stainless steels in oil and gas production environments; subsea corrosion /erosion monitoring in production facilities; fiberglass reinforced pipe and tubulars in oilfield service; corrosion control technology in power transmission and distribution; mechanisms and methods of scale and deposit control; closing the loop -- results oriented cooling system monitoring and control; and minimization of aqueous discharge

A theory of lexical access in speech production [target paper

NARCIS (Netherlands)

Levelt, W.J.M.; Roelofs, A.P.A.; Meyer, A.S.

1999-01-01

Preparing words in speech production is normally a fast and accurate process. We generate them two or three per second in fluent conversation; and overtly naming a clear picture of an object can easily be initiated within 600 ms after picture onset. The underlying process, however, is exceedingly

Paper in architecture : Research by design, engineering and prototyping

NARCIS (Netherlands)

Latka, J.F.

2017-01-01

Paper is a fascinating material that we encounter every day in different variants: tissues, paper towels, packaging material, wall paper or even fillers of doors. Despite radical changes in production technology, the material, which has been known to mankind for almost two thousand years, still has

Beneficial uses of paper mill residuals for New York State`s recycled-paper mills. Final report

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-09-01

This report evaluates the New York paper mill industry in terms of the productive management and treatment of solid wastes. It identifies current efforts by recycling mills to beneficially use paper mill residuals (often called sludge) and suggests additional options that should be considered by the industry in general and individual mills in particular. It also examines the regulations and economics affecting the mills and suggests actions that could improve the industry`s ability to convert wastes to value-added products. The report recommends that the mills should continue measures to reduce fiber and filler clay losses, promote the transfer of usable fiber and clay to mills able to use them, upgrade sludge dewatering capabilities, and take a more regional approach to solid waste disposal problems. State agencies are urged to support these efforts, encourage the development and commercialization of new beneficial use technologies, and reduce regulatory barriers whenever possible.

Fibrous Fillers to Manufacture Ultra High Ash/Performance Paper

Energy Technology Data Exchange (ETDEWEB)

Dr. VIjay K. Mathur

2009-04-30

The paper industry is one of the largest users of energy and emitters of CO2 in the US manufacturing industry. In addition to that, it is facing tremendous financial pressure due to lower cost imports. The fine paper industry has shrunk from 15 million tons per year production to 10 million tons per year in the last 5 years. This has resulted in mill closures and job loses. The AF&PA and the DOE formed a program called Agenda 2020 to help in funding to develop breakthrough technologies to provide help in meeting these challenges. The objectives of this project were to optimize and scale-up Fibrous Fillers technology, ready for commercial deployment and to develop ultra high ash/high performance paper using Fibrous Fillers. The goal was to reduce energy consumption, carbon footprint, and cost of manufacturing paper and related industries. GRI International (GRI) has been able to demonstrate the techno - economic feasibility and economic advantages of using its various products in both handsheets as well as in commercial paper mills. GRI has also been able to develop sophisticated models that demonstrate the effect of combinations of GRI's fillers at multiple filler levels. GRI has also been able to develop, optimize, and successfully scale-up new products for use in commercial paper mills.

Quantity and/or Quality? The Importance of Publishing Many Papers

Science.gov (United States)

van den Besselaar, Peter

2016-01-01

Do highly productive researchers have significantly higher probability to produce top cited papers? Or do high productive researchers mainly produce a sea of irrelevant papers—in other words do we find a diminishing marginal result from productivity? The answer on these questions is important, as it may help to answer the question of whether the increased competition and increased use of indicators for research evaluation and accountability focus has perverse effects or not. We use a Swedish author disambiguated dataset consisting of 48.000 researchers and their WoS-publications during the period of 2008–2011 with citations until 2014 to investigate the relation between productivity and production of highly cited papers. As the analysis shows, quantity does make a difference. PMID:27870854

Biodiesel I: Historical background, present and future production and standards - professional paper

Directory of Open Access Journals (Sweden)

Skala Dejan U.

2004-01-01

Full Text Available Biodiesel is defined as a fuel which may be used as pure biofuel or at high concentration in mineral oil derivatives, in accordance with specific quality standards for transport applications. The main raw material used for biodiesel production is rapeseed, which contains mono-unsaturated acids (about 60% and also poly-unsaturated fatty acids (C 18:1 and C 18:3 in a lower quantity, as well as some undesired saturated fatty acids (palmitic and stearic acids. Other raw materials have also been used in research and the industrial production of biodiesel (palm oil, sunflower oil, soybean oil, waste plant oil, animal fats, etc. The historical background of biodiesel production, installed industrial capacities, as well as the Directive of the European Parliament and of the Council (May 2003 regarding the promotion of the use of biofuels or other renewable fuels for transport are discussed in the first part of this article. The second part focuses on some new concepts for the future development of technology for biodiesel production, based on the application of non-catalytic transesterification under supercritical conditions or the use of lipases as an alternative catalyst for this reaction.

Paper-based assay of antioxidant activity using analyte-mediated on-paper nucleation of gold nanoparticles as colorimetric probes.

Science.gov (United States)

Choleva, Tatiana G; Kappi, Foteini A; Giokas, Dimosthenis L; Vlessidis, Athanasios G

2015-02-20

With the increasing interest in the health benefits arising from the consumption of dietary products rich in antioxidants, there exists a clear demand for easy-to-use and cost-effective tests that can be used for the identification of the antioxidant power of food products. Paper-based analytical devices constitute a remarkable platform for such expedient and low-cost assays with minimal external resources but efforts in this direction are still scarce. In this work we introduce a new paper-based device in the form of a sensor patch that enables the determination of antioxidant activity through analyte-driven on-paper formation of gold nanoparticles. The principle of detection capitalizes, for the first time, on the on-paper nucleation of gold ions to its respective nanoparticles, upon reduction by antioxidant compounds present in an aqueous sample. The ensuing chromatic transitions, induced on the paper surface, are used as an optical "signature" of the antioxidant strength of the solution. The response of the paper-based sensor was evaluated against a large variety of antioxidant species and the respective dose response curves were constructed. On the basis of these data, the contribution of each species according to its chemical structure was elucidated. For the analysis of real samples, a concentration-dependent colorimetric response was established against Gallic acid equivalents over a linear range of 10 μM-1.0 mM, with detection limits at the low and ultra-low μM levels (i.e. <1.0 μM) and satisfactory precision (RSD=3.6-12.6%). The sensor has been tested for the assessment of antioxidant activity in real samples (teas and wines) and the results correlated well with commonly used antioxidant detection methods. Importantly, the sensor performed favorably for long periods of time when stored at moisture-free and low temperature conditions without losing its activity thus posing as an attractive alternative to the assessment of antioxidant activity without

Product Configuration Systems - Implications for Product Innovation and Development

DEFF Research Database (Denmark)

Edwards, Kasper; Pedersen, Jørgen Lindgaard

2004-01-01

configurations. However, costs are but one parameter on which firms compete and firms must continually innovate new and develop existing products. This paper presents original empirical insights on implementation and use of product configuration systems in a number of Danish industrial firms. The paper discusses...... the organisational changes associated with PCS and how this affects product innovation and development. The paper begins by introducing product configuration systems, which are then placed in context to the firm as a process technology which coordinate different processes: product development, order acquisition......Product Configuration Systems (PCS) is a step in the direction of mass customization in the sense that PCS allows a firm to significantly lower the unit cost of configuration. Thus PCS is a valuable technology for lowering operating costs while retaining a high number of possible product...

Project Independence: Construction of an Integrated Biorefinery for Production of Renewable Biofuels at an Existing Pulp and Paper Mill

Energy Technology Data Exchange (ETDEWEB)

Freeman, Douglas

2012-06-01

Project Independence proposed to construct a demonstration biomass-to-liquids (BTL) biorefinery in Wisconsin Rapids, isconsin. The biorefinery was to be co-located at the existing pulp and paper mill, NewPage Wisconsin System Incorporated’s Wisconsin Rapids Mill, and when in full operation would both generate renewable energy for Wisconsin Rapids Mill and produce liquid fuels from abundant and renewable lignocellulosic biomass. The biorefinery would serve to validate the thermochemical pathway and economic models for BTL production using forest residuals and wood waste, providing a basis for proliferating BTL conversion technologies throughout the United States. It was a project goal to create a compelling new business model for the pulp and paper industry, and support the nation’s goal for increasing renewable fuels production and reducing its dependence on foreign oil. NewPage Corporation planned to replicate this facility at other NewPage Corporation mills after this first demonstration scale plant was operational and had proven technical and economic feasibility. An overview of the process begins with biomass being harvested, sized, conditioned and fed into a ThermoChem Recovery International (TRI) steam reformer where it is converted to high quality synthetic gas (syngas). The syngas is then cleaned, compressed, scrubbed, polished and fed into the Fischer-Tropsch (F-T) catalytic reactors where the gas is converted into two, sulfur-free, clean crude products which will be marketed as revenue generating streams. Additionally, the Fischer-Tropsch products could be upgraded for use in automotive, aviation and chemical industries as valuable products, if desired. As the Project Independence project set out to prove forest products could be used to commercially produce biofuels, they planned to address and mitigate issues as they arose. In the early days of the Project Independence project, the plant was sized to process 500 dry tons of biomass per day but would

Methane from waste containing paper

Energy Technology Data Exchange (ETDEWEB)

1981-12-24

Waste solids containing paper are biologically treated in a system by: fermentation with lactobacilli, separation of the solids, ion exchange of the supernatant from the separation, anaerobic digestion of the ion-exchanged liquor, separation of a liquor from the fermentation, and digestion of the liquor. Thus, a municipal waste containing paper and water was inoculated with Aspergillus niger and lactobacilli for 2 days; the mixture was anaerobically treated and centrifuged; the clear liquor was ion exchanged; and the solid waste was filter pressed. The filter cake was treated with Trichoderma nigricaus and filtered. The filtrate and the ion-exchanged liquor were digested for CH/sub 4/ production.

Topical papers on heavy water, fuel fabrication and reactors

International Nuclear Information System (INIS)

1978-01-01

A total of four papers is presented. The first contribution of the Federal Republic of Germany reviews the market situation for reactors and the relations between reactor producers and buyers as reflected in sales agreements. The second West German contribution gives a world-wide survey of fuel element production as well as of fuel and fuel element demand up to the year 2000. The Canadian paper discusses the future prospects of heavy-water production, while the Ecuador contribution deals with small and medium-sized nuclear power plants

Construction of flexible metal-organic framework (MOF) papers through MOF growth on filter paper and their selective dye capture.

Science.gov (United States)

Park, Jeehyun; Oh, Moonhyun

2017-09-14

The conjugation of metal-organic frameworks (MOFs) with other materials is an excellent strategy for the production of advanced materials having desired properties and so appropriate applicability. In particular, the integration of MOFs with a flexible paper is expected to form valuable materials in separation technology. Here we report a simple method for the generation of MOF papers through the compact and uniform growth of MOF nanoparticles on the cellulose surface of a carboxymethylated filter paper. The resulting MOF papers show a selective capture ability for negatively charged organic dyes and they can be used for dye separation through simple filtration of a dye solution on the MOF papers. In addition, MOF papers can be reused after a simple washing process without losing their effective dye capture ability.

Comparing the efficacy of digital flashcards versus paper flashcards to improve receptive and productive L2 vocabulary

Directory of Open Access Journals (Sweden)

Gilbert Dizon

2017-06-01

Full Text Available Several researchers have compared the efficacy of digital flashcards (DFs versus paper flashcards (PFs to improve L2 vocabulary and have concluded that using DFs is more effective (Azabdaftari & Mozaheb, 2012; Başoğlu & Akdemir, 2010; Kiliçkaya & Krajka, 2010. However, these studies did not utilize vocabulary learning strategies (VLSs as a way to support the vocabulary development of those using PFs. This is significant because DFs often offer a range of features to promote vocabulary development, whereas PFs are much more basic; thus, learners who study via paper materials are at a disadvantage compared with those who use DFs. Given the success that VLSs have had in fostering L2 vocabulary enhancement (e.g., Mizumoto & Takeuchi, 2009, their incorporation could have influenced the previous studies. Therefore, one of the primary aims of this study was to find if there were significant differences in receptive and productive L2 vocabulary improvements between students who used PFs in conjunction with 3 VLSs – dropping, association, and oral rehearsal – and those who used the DF tools Quizlet and Cram. Additionally, the researchers examined the learners’ opinions to see if there was a preference for either study method. A total of 52 EFL students at two Japanese universities participated in the 12-week study. Pre- and post-tests were administered to measure the vocabulary gains in the PF group (n = 26 and the DF group (n = 26. Results from a paired t-test revealed that both groups made significant improvements in receptive and productive vocabulary. However, the difference between the gains was not significant, which contrasts with past comparison studies of DFs and PFs and highlights the importance of VLSs. A 10-item survey with closed and Likert-scale questions was also administered to determine the participants’ opinions towards the study methods. Higher levels of agreement were found in the experimental group, indicating that the

Design and analysis of sustainable paper bicycle

Science.gov (United States)

Roni Sahroni, Taufik; Nasution, Januar

2017-12-01

This paper presents the design of sustainable paper bicycle which describes the stage by stage in the production of paper bicycle. The objective of this project is to design a sustainable paper bicycles to be used for children under five years old. The design analysis emphasizes in screening method to ensure the design fulfil the safety purposes. The evaluation concept is presented in designing a sustainable paper bicycle to determine highest rating. Project methodology is proposed for developing a sustainable paper bicycle. Design analysis of pedal, front and rear wheel, seat, and handle were presented using AutoCAD software. The design optimization was performed to fulfil the safety factors by modifying the material size and dimension. Based on the design analysis results, it is found that the optimization results met the factor safety. As a result, a sustainable paper bicycle was proposed for children under five years old.

Renewable energy sources. European Commission papers

International Nuclear Information System (INIS)

1997-05-01

The ''Directive on the Promotion of Electricity from Renewable Sources of Energy in the Internal Electricity Market'' was adopted in September 2001. Its purpose is to promote an increase in the contribution of renewable energy sources to electricity production in the internal market for electricity and to create a basis for a future Community framework. Energie-Cites provides in this document a summary of its opinion on the Green Paper and on Alterner II and gives a proposal for an Action Plan concerning the White Paper. (A.L.B.)

The effect of release liner materials on adhesive contaminants, paper recycling and recycled paper properties

Science.gov (United States)

Richard Venditti; Richard Gilbert; Andy Zhang; Said Abubakr

2000-01-01

Release liner waste material is found in post-consumer waste streams and is also a significant component of the preconsumer waste stream generated in the manufacturing of adhesive products. To date, very little has been reported pertaining to the behavior of release liner in paper recycling. In this study, the effect of the release liner material on the behavior of...

New approach to recycling and waste-to-energy in paper production, Urban Mill

Energy Technology Data Exchange (ETDEWEB)

Ristola, P. [Metso Corporation (Finland)

2002-10-01

Greenfield paper mills are commonly perceived as massive investments with a high level of associated impact on the local environment. Parallel to this, increasingly strict targets are being set by modem legislation for reducing waste disposal at landfills. One long-term solution to this dilemma lies in extended materials recycling, combined with effective utilisation of waste as energy. Metso Paper's Urban Mill is a unique pilot concept that promises to become an important part of such a solution. The novelty of Metso Paper's new eco-efficient Urban Mill concept lies in its combination of a small paper mill with using solid waste to generate energy. The roots of the concept go back to the early 1990s, when several mini-mills were built to produce raw materials for corrugated containers in North America. The competitiveness of mini-mills like this is based on several benefits: lowcost, high-quality waste paper raw material, utilisation of adjacent facilities for utilities, and modern machines with lean manning and low inbound and outbound logistics costs.

Product Structuring, an overview

DEFF Research Database (Denmark)

Tichem, Marcel; Storm, Ton; Andreasen, Mogens Myrup

1997-01-01

.In the paper, the field of product structuring is defined and broken down into topics. For each of the topics, results of research are presented. Issues for further research are identified. The references in the paper refer to papers in the proceedings of the workshops.......This paper presents the highlights of two WDK Workshops on Product Structuring. Product structuring plays an important role in creating products which have good functional and life-cycle related properties, in design process management, and in several other company functions like production control...

PY/GC/MS ANALYSES OF HISTORICAL PAPERS

Directory of Open Access Journals (Sweden)

Yeghis Keheyan

2008-08-01

Full Text Available The thermal degradation of cellulose is an important process in several fields such as the paper industry, biomass combustion, fire retardation, etc. Paper consists mostly of cellulose fibres. Although the fibre source has changed continiously from cotton or linen rags to wood, its nature is still vegetal. Pyrolysis in combination with gas chromatography and mass spectrometry has been used to identify the structures of thermal degradation products with the aim to characterize papers used in different centuries. Pyrolysis of cellulose has also been studied in the presence of the methylating reagent tetramethylammonium hydroxide (TMAH.

Semi-parametrical NAA method for paper analysis

International Nuclear Information System (INIS)

Medeiros, Ilca M.M.A.; Zamboni, Cibele B.; Cruz, Manuel T.F. da; Morel, Jose C.O.; Park, Song W.

2007-01-01

The semi-parametric Neutron Activation Analysis technique, using Au as flux monitor, was applied to determine element concentrations in white paper, usually commercialized, aiming to check the quality control of its production in industrial process. (author)

Product Structure, the Heart of Product Definition

Science.gov (United States)

DeHoog, C., Jr.

1999-01-01

This paper describes the LMMSS Product Definition System (PDS) philosophy and approach were the use of each item parts document or software can be traced to a specific end item (EI) serial/tail number of the product. It explains why a part-oriented approach to data organization and configuration management is required. The definition of part-oriented is that all appropriate product definition data products will be collected. Referenced and managed by their linkage/relationship to parts/items, The paper will touch upon how LMMSS store/controls product definition information under each project's top product designator in a two tiered approach. One tier for each product end item and another tier which contain/controls listings of drawings, documents. Specifications and standards that are required for hardware item definition.

Alignment of Product Models and Product State Models - Integration of the Product Lifecycle Phases

DEFF Research Database (Denmark)

Larsen, Michael Holm; Kirkby, Lars Phillip; Vesterager, Johan

1999-01-01

The purpose of this paper is to discuss the integration of the Product Model (PM) and the Product State Model (PCM). Focus is on information exchange from the PSM to the PM within the manufacturing of a single ship. The paper distinguishes between information and knowledge integration. The paper ...... provides some overall strategies for integrating PM and PSM. The context of this discussion is a development project at Odense Steel Shipyard....

The green and blue water footprint of paper products: methodological considerations and quantification

NARCIS (Netherlands)

van Oel, P.R.; Hoekstra, Arjen Ysbert

2010-01-01

For a hardcopy of this report, printed in the Netherlands, an estimated 200 litres of water have been used. Water is required during different stages in the production process, from growing wood to processing pulp into the final consumer product. Most of the water is consumed in the forestry stage,

What holds paper together: Nanometre scale exploration of bonding between paper fibres

Science.gov (United States)

Schmied, Franz J.; Teichert, Christian; Kappel, Lisbeth; Hirn, Ulrich; Bauer, Wolfgang; Schennach, Robert

2013-01-01

Paper, a man-made material that has been used for hundreds of years, is a network of natural cellulosic fibres. To a large extent, it is the strength of bonding between these individual fibres that controls the strength of paper. Using atomic force microscopy, we explore here the mechanical properties of individual fibre-fibre bonds on the nanometre scale. A single fibre-fibre bond is loaded with a calibrated cantilever statically and dynamically until the bond breaks. Besides the calculation of the total energy input, time dependent processes such as creep and relaxation are studied. Through the nanometre scale investigation of the formerly bonded area, we show that fibrils or fibril bundles play a crucial role in fibre-fibre bonding because they act as bridging elements. With this knowledge, new fabrication routes can be deduced to increase the strength of an ancient product that is in fact an overlooked high-tech material. PMID:23969946

Improving photofermentative biohydrogen production by using intermittent ultrasonication and combined industrial effluents from palm oil, pulp and paper mills

International Nuclear Information System (INIS)

Budiman, Pretty Mori; Wu, Ta Yeong; Ramanan, Ramakrishnan Nagasundara; Md Jahim, Jamaliah

2017-01-01

Highlights: • Intermittent ultrasonication onto broth improved biohydrogen production. • A20T10 treatment produced 14.438 mL H_2/mL_m_e_d_i_u_m with 7.412% light efficiency. • Excessive ultrasonication (>306.1 J/mL) inhibited biohydrogen production. - Abstract: An ultrasonication technique was applied intermittently onto photofermentation broth during the first six hours of photofermentation to improve biohydrogen production by using Rhodobacter sphaeroides NCIMB8253. In this research, photofermentation broth consisted of a combination of palm oil (25%, v/v), pulp and paper (75%, v/v) mill effluents as well as liquid inoculum. The effects of amplitude (10, 20 and 30%, A) and ultrasonication duration (5, 10 and 15 min, T) were investigated in terms of their influences on photofermentative biohydrogen yield and total chemical oxygen demand (COD_t_o_t_a_l) removal. The recommended ultrasonication parameters were found at the middle range of amplitude and duration (A20T10). Using A20T10 intermittent treatment, the production of biohydrogen could be maximized up to 14.438 mL H_2/mL_m_e_d_i_u_m with a COD_t_o_t_a_l removal and light efficiency of 52.2% and 7.412%, respectively. By comparing the treatment without intermittent ultrasonication, an increase of biohydrogen yield by 44.6% was achieved in A20T10 treatment. A total energy input of 306.1 J/mL (A20T10 treatment) was supplied to improve substrate consumption and light distribution during the photofermentation, which led to the increase of biohydrogen yield.

Waste paper for recycling: Overview and identification of potentially critical substances.

Science.gov (United States)

Pivnenko, Kostyantyn; Eriksson, Eva; Astrup, Thomas F

2015-11-01

Paper product manufacturing involves a variety of chemicals used either directly in paper and pulp production or in the conversion processes (i.e. printing, gluing) that follow. Due to economic and environmental initiatives, paper recycling rates continue to rise. In Europe, recycling has increased by nearly 20% within the last decade or so, reaching a level of almost 72% in 2012. With increasing recycling rates, lower quality paper fractions may be included. This may potentially lead to accumulation or un-intended spreading of chemical substances contained in paper, e.g. by introducing chemicals contained in waste paper into the recycling loop. This study provides an overview of chemicals potentially present in paper and applies a sequential hazard screening procedure based on the intrinsic hazard, physical-chemical and biodegradability characteristics of the substances. Based on the results, 51 substances were identified as potentially critical (selected mineral oils, phthalates, phenols, parabens, as well as other groups of chemicals) in relation to paper recycling. It is recommended that these substances receive more attention in waste paper. Copyright © 2015 Elsevier Ltd. All rights reserved.

PAPER PRINTED PHOTOVOLTAIC CELLS: EMERGING METHOD OF PV CELL PRODUCTION

OpenAIRE

Nikhil S. Mane*, Avinash M. Patil2, Vishal P. Patil3

2017-01-01

An Solar energy is a renewable method for the energy production. The use of solar energy is increasing day by day and share of solar energy is increasing in the power sector of India. But as per pollution increases with energy consumption the need of solar energy will goes on increase in recent future as solar energy is a best option in both thermal and photovoltaic energy conversion processes. Photovoltaic cells are compact and has no movable parts which provides them effectiveness and easy ...

Printed and tablet e-paper newspaper from an environmental perspective - A screening life cycle assessment

International Nuclear Information System (INIS)

Moberg, Asa; Johansson, Martin; Finnveden, Goeran; Jonsson, Alex

2010-01-01

Viable alternatives to conventional newspapers, such as electronic papers, e-papers or e-readers, are intended to have many of the qualities of paper, such as reading using reflective light, high resolution, 180 deg. viewing angle. It has been suggested that the environmental impact of e-paper can be lower than for printed and internet-based newspapers. However, in order to find the facts of the matter, a thorough life cycle perspective covering raw material acquisition, production, use and disposal should preferably be used to study the environmental performance of the different products. A screening life cycle assessment was performed to describe the potential environmental impacts of two product systems; printed on paper and tablet e-paper newspapers. Results show that the most significant phase of the life cycle for both product systems was the production of substrate or platform. Accordingly, key aspects that may affect the resulting environmental performance of newspaper product systems were for the printed newspaper number of readers per copy and number of pages per issue and for the tablet e-paper newspaper lifetime and multi-use of the device. The printed newspaper in general had a higher energy use, higher emissions of gases contributing to climate change and several other impact categories than the tablet e-paper newspaper. It was concluded that tablet e-paper has the potential to decrease the environmental impact of newspaper consumption. However, further studies regarding the environmental impact of production and waste management of electronic devices and internet use, as well as more comprehensive assessment of toxicological impacts are needed. As the data on the electronic devices becomes more comprehensive this may prove to be a major limitation of electronic newspaper systems. Developers are suggested to strive towards minimisation of toxic and rare substances in production.

Nemesia root hair response to paper pulp substrate for micropropagation.

Science.gov (United States)

Labrousse, Pascal; Delmail, David; Decou, Raphaël; Carlué, Michel; Lhernould, Sabine; Krausz, Pierre

2012-01-01

Agar substrates for in vitro culture are well adapted to plant micropropagation, but not to plant rooting and acclimatization. Conversely, paper-pulp-based substrates appear as potentially well adapted for in vitro culture and functional root production. To reinforce this hypothesis, this study compares in vitro development of nemesia on several substrates. Strong differences between nemesia roots growing in agar or in paper-pulp substrates were evidenced through scanning electron microscopy. Roots developed in agar have shorter hairs, larger rhizodermal cells, and less organized root caps than those growing on paper pulp. In conclusion, it should be noted that in this study, in vitro microporous substrates such as paper pulp lead to the production of similar root hairs to those found in greenhouse peat substrates. Consequently, if agar could be used for micropropagation, rooting, and plant acclimatization, enhancement could be achieved if rooting stage was performed on micro-porous substrates such as paper pulp.

Rheology and extrusion of low-grade paper and sludge

Science.gov (United States)

C. Tim Scott; Stefan Zauscher; Daniel J. Klingenberg

1999-01-01

This paper discusses efforts to characterize the rheological properties of pulps that include low-grade wastepapers and papermill sludges to determine their potential for extrusion and conversion into useful products. We investigated apparent changes in viscosity associated with the addition of typical inorganic paper fillers (calcium carbonate, kaolin clay, and...

Research Advances: Paper Batteries, Phototriggered Microcapsules, and Oil-Free Plastic Production

Science.gov (United States)

King, Angela G.

2010-01-01

Chemists continue to work at the forefront of materials science research. Recent advances include application of bioengineering to produce plastics from renewable biomass instead of petroleum, generation of paper-based batteries, and development of phototriggerable microcapsules for chemical delivery. In this article, the author provides summaries…

Intelligent products : A survey

NARCIS (Netherlands)

Meyer, G.G.; Främling, K.; Holmström, J.

This paper presents an overview of the field of Intelligent Products. As Intelligent Products have many facets, this paper is mainly focused on the concept behind Intelligent Products, the technical foundations, and the achievable practical goals of Intelligent Products. A novel classification of

Proceedings of condensed papers on alternate energy sources

Energy Technology Data Exchange (ETDEWEB)

Veziroglu, T.N. (ed.)

1979-01-01

The conference covers the results of research and developments which have taken place during the last 2 years. It includes sessions on solar energy, ocean thermal energy, wind energy, hydro power, nuclear breeders and nuclear fusion, synthetic fuels from coal or waste, hydrogen production and uses. The volume of the Proceedings presents the papers and lectures in condensed format grouped by their subjects under 40 technical sessions. Condensed papers are presented for the 336 presentations; abstracts have previously appeared in the DOE Energy Data Base for 33 of the full-length papers.

Are Cellulose Nanofibers a Solution for a More Circular Economy of Paper Products?

Science.gov (United States)

Delgado-Aguilar, Marc; Tarrés, Quim; Pèlach, M Àngels; Mutjé, Pere; Fullana-I-Palmer, Pere

2015-10-20

This paper presents the study of the feasibility of incorporating lignocellulosic nanofibers (LCNF) to paper in order to maintain the relevant physical properties and increase the number of cycles that paper can be recycled in the technosphere in a more circular economy. For that purpose, the effect of mechanical refining in recycling processes was compared with that of the novel LCNF addition. In this sense, the behavior of a bleached kraft hardwood pulp when recycled was investigated, as well as the effects of each methodology. Since there are many issues to be considered when trying to replace a technology, the present paper analyses its feasibility from a technical and environmental point of view. Technically, LCNF present greater advantages against mechanical refining, such as higher mechanical properties and longer durability of the fibers. A preliminary life cycle assessment showed that the environmental impacts of both systems are very similar; however, changing the boundary conditions to some feasible future scenarios, led to demonstrate that the CNF technology may improve significantly those impacts.

NEDO's white paper on renewable energy technologies

International Nuclear Information System (INIS)

2010-01-01

This document proposes a synthesis of a 'white paper' published by the Japanese institution NEDO (New Energy and Industrial Technology Development Organization) on the development of technologies in the field of renewable energies. For the various considered energies, this report gives indications of the world market recent evolutions, of Japanese productions and objectives in terms of productions and costs. The different energies treated in this report are: solar photovoltaic, wind, biomass, solar thermal, waves, seas, hydraulic, geothermal, hot springs, snow and ice, sea currents, electricity production by thermo-electrical effect or by piezoelectric modules, reuse of heat produced by factories, use of the thermal gradient between air and water, intelligent communities and networks

Topical papers on uranium conversion and enrichment

International Nuclear Information System (INIS)

Uranium conversion and enrichment are discussed in 5 papers by representatives of the USA, Great Britain and Switzerland. The state of the art is reviewed, and future prospects are given. Supply assurance is directly related to the necessary production capacities and the supply agreements

Water requirements of the pulp and paper industry

Science.gov (United States)

Mussey, Orville D.

1955-01-01

Water, of varied qualities, is used for several purposes in the manufacture of pulp and paper, as a vehicle for transporting the constituents of paper in the paper machines; as process water for cooking wood chips to make pulp; as a medium for heat transfer; and for washing the pulpwood, the woodpulp, and the machines that handle the pulp. About 3,200 million gallons of water was withdrawn from surface- and ground-water sources each day during 1950 for the use of the pulp and paper industry. This is about 4 percent of the total estimated industrial withdrawal of water in the Nation The paper industry in the United States has been growing at a rapid rate. It has increased about tenfold in the last 50 years and has doubled every 15 years. The 1950 production of paper was about 24 million tons, which amounts to about 85 percent of the domestic consumption. In 1950, the pulp mills of the country produced more than 14 million tons of woodpulp, which supplied about 85 percent of the demand by the paper mills and other industries. The remainder of the fiber for paper manufacture was obtained from imported woodpulp, from reclaimed wastepaper, and from other fibers including rags and straw. The nationwide paper consumption for 1955 has been estimated at 31,700,000 tons. Woodpulp is classified according to the process by which it is made. Every woodpulp has characteristics that are carried over into the many and diverse grades of paper. Groundwood pulp is manufactured by simply grinding up wood and refining the resulting product. Soda, sulfite, and sulfate pulps are manufactured by chemically breaking down the lignin that cements the cellulose of the wood together and removing, cleaning, and sometimes bleaching the resulting fibers. Some woodpulp is produced by other methods. Sulfate-pulp mills are increasing in number and in rated daily capacity and are manufacturing more than half of the present domestic production of woodpulp. Most of the newer and larger woodpulp mills

Object technology: A white paper

Energy Technology Data Exchange (ETDEWEB)

Jordan, S.R.; Arrowood, L.F.; Cain, W.D.; Stephens, W.M.; Vickers, B.D.

1992-05-11

Object-Oriented Technology (OOT), although not a new paradigm, has recently been prominently featured in the trade press and even general business publications. Indeed, the promises of object technology are alluring: the ability to handle complex design and engineering information through the full manufacturing production life cycle or to manipulate multimedia information, and the ability to improve programmer productivity in creating and maintaining high quality software. Groups at a number of the DOE facilities have been exploring the use of object technology for engineering, business, and other applications. In this white paper, the technology is explored thoroughly and compared with previous means of developing software and storing databases of information. Several specific projects within the DOE Complex are described, and the state of the commercial marketplace is indicated.

Commentary paper: Scientific objectivity and postphenomenological perception

DEFF Research Database (Denmark)

Olesen, Finn

2011-01-01

Don Ihde’s paper “Stretching the in-between: Embodiment and beyond” appears to me as a stimulating, topical text with a number of important arguments about human embodiment as a dynamic and epistemically relevant dimension to scientific knowledge production. But, indirectly, the text also raises...

Low-level radioactive waste management. Background paper

International Nuclear Information System (INIS)

Fawcett, R.

1993-11-01

The management of radioactive waste is one of the most serious environmental problems facing Canadians. From the early industrial uses of radioactive material in the 1930s to the development of nuclear power reactors and the medical and experimental use of radioisotopes today, there has been a steady accumulation of waste products. Although the difficulties involved in radioactive waste management are considerable, responsible solutions are possible. This paper will discuss low-level radioactive waste, including its production, the amounts in storage, the rate of waste accumulation and possible strategies for its management. (author). 2 figs

OPTIMIZATION OF CHEMICAL AND ENZYMATIC DEINKING OF PHOTOCOPIER WASTE PAPER

Directory of Open Access Journals (Sweden)

Puneet Pathak

2011-02-01

Full Text Available The utilization of post-consumer papers in the production of new paper products is increasing all over the world in recent years. Recycling of photocopier paper is a major problem due to difficulty in removal of non-impact ink. Enzymes offer potential advantages in ecofriendly deinking of recovered paper. In this study the deinking of photocopier paper was examined using chemicals and a commercial cellulase enzyme. Parameters of deinking experiments were optimized for hydrapulping. The ink was removed by flotation and washing processes. Then these parameters were compared in terms of ink removal ability of the process, as well as optical and strength properties of the deinked paper. The application of enzymatic deinking improved ink removal efficiency by 24.6% and freeness by 21.6% with a reduction in drainage time of 11.5% in comparison to those obtained with chemical deinking. The physical properties, namely burst index and tensile index, were observed to improve by 15.3% and 2.7%, respectively and brightness and tear index decreased by 2.1% and 21.9%, respectively. Results of deinking efficiency of photocopier paper showed that the enzyme used in the present work performed better than the conventional chemicals used for deinking.

Coordiantion by using Product Specifications in Product Development

DEFF Research Database (Denmark)

Terkelsen, Søren Bendix

1997-01-01

This paper is based on a case study. It treats the coordination by generating product specifications in product development. This paper contains three very important aspects, which cause a need for coordination, and call attention to the coordination mechanisms. The three aspects are task...... uncertainty, task complexity, and dependencies between activities. If one want to select coordination mechanisms, which improve the performance in product development, it is very important to have a knowledge about these three aspects. In the following the aspects are identified in the literature...

The Canadian nuclear power industry. Background paper

International Nuclear Information System (INIS)

Nixon, A.

1993-12-01

Nuclear power, the production of electricity from uranium through nuclear fission, is by far the most prominent segment of the nuclear industry. The value of the electricity produced, $3.7 billion in Canada in 1992, far exceeds the value of any other product of the civilian nuclear industry. Power production employs many more people than any other sector, the capital investment is much greater, and nuclear power plants are much larger and more visible than uranium mining and processing facilities. They are also often located close to large population centres. This paper provides an overview of some of the enormously complex issues surrounding nuclear power. It describes the Canadian nuclear power industry, addressing i particular its performance so far and future prospects. (author). 1 tab

The Canadian nuclear power industry. Background paper

Energy Technology Data Exchange (ETDEWEB)

Nixon, A [Library of Parliament, Ottawa, ON (Canada). Science and Technology Div.

1993-12-01

Nuclear power, the production of electricity from uranium through nuclear fission, is by far the most prominent segment of the nuclear industry. The value of the electricity produced, $3.7 billion in Canada in 1992, far exceeds the value of any other product of the civilian nuclear industry. Power production employs many more people than any other sector, the capital investment is much greater, and nuclear power plants are much larger and more visible than uranium mining and processing facilities. They are also often located close to large population centres. This paper provides an overview of some of the enormously complex issues surrounding nuclear power. It describes the Canadian nuclear power industry, addressing i particular its performance so far and future prospects. (author). 1 tab.

Bisphenol A and replacements in thermal paper: A review.

Science.gov (United States)

Björnsdotter, Maria K; de Boer, Jacob; Ballesteros-Gómez, Ana

2017-09-01

Thermal paper contains potentially toxic compounds such as bisphenol A (BPA), which is used as a color developer. BPA has been reported in thermal paper in concentrations up to 42,600 μg g -1 . The exposure to BPA via dermal transfer has been recently discussed as a significant contribution to the overall human exposure and the estimated daily intake (EDI) has been reported up to 218 μg d -1 . BPA has been also detected in recycled paper with concentrations up to 46 μg g -1 . Due to the fact that BPA is a known endocrine disruptor and migrates from materials, regulatory restrictions have been established to prevent risks for the human health. As a consequence, structural analogues, such as bisphenol S (BPS) have been introduced into the market. Little is known about the presence and toxicity of these emerging replacements, and concern has risen about them. The present review gives an overview of the occurrence and levels of BPA and replacements in thermal paper. BPA is still the most common color developer found in thermal paper, followed by BPS. The analytical methods used for quantification of BPA and BPA replacements in paper products are also reviewed. BPA is transferred from thermal paper products to the finger pads upon handling it. Paper-skin transfer followed by penetration of BPA depends on conditions (e.g. greasiness of fingers and use of hand cream). It is, however, still debated whether thermal paper as a source for human exposure contributes significantly to the overall internal BPA exposure. Copyright © 2017 Elsevier Ltd. All rights reserved.

Chemically-modified cellulose paper as a microstructured catalytic reactor.

Science.gov (United States)

Koga, Hirotaka; Kitaoka, Takuya; Isogai, Akira

2015-01-15

We discuss the successful use of chemically-modified cellulose paper as a microstructured catalytic reactor for the production of useful chemicals. The chemical modification of cellulose paper was achieved using a silane-coupling technique. Amine-modified paper was directly used as a base catalyst for the Knoevenagel condensation reaction. Methacrylate-modified paper was used for the immobilization of lipase and then in nonaqueous transesterification processes. These catalytic paper materials offer high reaction efficiencies and have excellent practical properties. We suggest that the paper-specific interconnected microstructure with pulp fiber networks provides fast mixing of the reactants and efficient transport of the reactants to the catalytically-active sites. This concept is expected to be a promising route to green and sustainable chemistry.

Chemically-Modified Cellulose Paper as a Microstructured Catalytic Reactor

Directory of Open Access Journals (Sweden)

Hirotaka Koga

2015-01-01

Full Text Available We discuss the successful use of chemically-modified cellulose paper as a microstructured catalytic reactor for the production of useful chemicals. The chemical modification of cellulose paper was achieved using a silane-coupling technique. Amine-modified paper was directly used as a base catalyst for the Knoevenagel condensation reaction. Methacrylate-modified paper was used for the immobilization of lipase and then in nonaqueous transesterification processes. These catalytic paper materials offer high reaction efficiencies and have excellent practical properties. We suggest that the paper-specific interconnected microstructure with pulp fiber networks provides fast mixing of the reactants and efficient transport of the reactants to the catalytically-active sites. This concept is expected to be a promising route to green and sustainable chemistry.

Neutron activation analysis of recycled paper and board in contact with food

International Nuclear Information System (INIS)

Parry, S.J.

2001-01-01

Recycling of wastepaper has been shown to increase the concentration of metals in the product. Although it is generally assumed that there is no risk of migration of chemical contaminants from recycled paper and board into food, the UK Food Standards Agency has identified limited evidence of such migration. Therefore, it is important to carry out research to establish the concentration of metals in recycled paper and board in contact with food. A previous study at Imperial College had resulted in the development of a neutron activation analysis method to determine trace metals in plastic packaging. An initial study is described to establish whether the same methodology could be applied to paper and board and to carry out a preliminary investigation into a small range of recycled paper and board products. The study was made on 22 elements in 17 products including pizza boxes, fries boxes, kitchen towel, table napkins, greaseproof paper, tea bags and cake cases. Elevated levels of some elements including barium (69 mg/kg in pizza bases) and chromium (5 mg/kg in napkins, 50 mg/kg in greaseproof paper, 2 mg/kg in cake cases, 90 mg/kg in baking parchment, 5 mg/kg in fries boxes and 5 mg/kg in pizza bases) have been shown. (author)

Nanotechnology in paper electronics

Science.gov (United States)

Demming, Anna; Österbacka, Professor Ronald; Han, Jin-Woo, Dr

2014-03-01

The ability to put cutting edge technology on paper—not in words but in a working physical form—has been attracting an increasing number of researchers over the past decade. Paper has many advantages that make it attractive for flexible electronics: it is relatively environmentally benign; it is renewable; it can be recycled; it is light weight; production processes for paper are well advanced; and it is inexpensive. This special issue, with guest editors Ronald Österbacka from Åbo Akademi University in Finland and Jin-Woo Han from the NASA AMES Research Center, features some of the latest in paper electronics research, including developments towards applications in displays, sensing and alternative energy sources, as well as fundamental studies to further our understanding of how paper can be most effectively used in electronics. As Andrew Steckl and colleagues in the US point out, 'Cellulose-based paper substrates were implemented as an electronic substrate as early as 1969, with most advancement occurring in the past decade largely due to technology improvements in thin film deposition and organic materials' [1, 2]. They report a detailed comparison between paper, standard liquid crystal display rigid glass and flexible glass for hosting pentacene organic thin film transistors, and obtain promising results for future paper-based devices. As most meaningful electronic devices rely on transistors to function, transistors feature quite prominently in this special issue. Rodrigo Martins and colleagues in France and Portugal study the effect of fibre type, structure and dimension on paper-based transistors and reveal further insights into how paper properties affect device performance [3]. Qing Wan and colleagues in China bring the state of the art in transistor technology to paper substrates [4], fabricating indium-zinc-oxide (IZO)-based protonic/electronic hybrid thin film transistors on paper and showing that they can be used as artificial synapses. Like the

Towards more efficient raw material and water use in the production of fine art paper

Energy Technology Data Exchange (ETDEWEB)

Pitkaenen, M. [Metsae-Serla Oyj, Aeaenekoski (Finland)

1999-07-01

Metsae-Serla's Aeaenekoski paper mill produces triple coated fine paper. The production capacity is 150000 t/a and the grammage range from 115 to 280 g/m{sup 2}. About 70% is sheeted at the mill. Profitability of the mill has been systematically improved. Among other things a good on-process wet end control system has been built. Raw material optimization has been done. The target of this two-year development project was to produce an optimized total plan for the raise of the closure degree based on critical examination of the whole paper making process. As a concrete target was a feasible plan how to cut the raw material losses to the effluent by 50% and the consumption of chemical water by 30%. The final target was significant annual cost savings. The project was run as three parallel sub-projects and total optimization was made simultaneously. The mill had two effluent flows; one for fibre containing and one for coating colour waste waters. Survey of both streams was carried out and the sources, amounts and quality of the fractions were determined. The lost raw material was 550 t/ month. One half was lost in the fibre and the other in the coating colour containing waste waters. Technical and economic evaluations were carried out for a proceeding plan. After tests and laboratory and pilot trials FilRec disperser was chosen as the treatment technique for the hydro cyclone reject and ultrafiltration for the recovery of coating colour. The specific consumption of chemical water was 9.1 m{sup 3}/ coated tonne. In the second sub-project a critical survey of the various uses was carried out. Quality demands for the chemical dilution purposes were studied by laboratory tests. Process chemical optimization was carried out. The effect of increasing closure on charge and COD build up was simulated using WinGEMS software. Possible solutions to replace chemical water and reduce its need were considered against the consequent investment costs. A proceeding plan for

Are there ways to improve the citations of a scientific paper?

Science.gov (United States)

Bartoli, E

2018-04-01

The expansion of scientific publications makes more difficult the mining of relevant information necessary for a productive appraisal of authors' work, scientific interaction and exchange. Papers over-citation is unproductive, under-citation of innovative research generates delay and inefficiency. The extraction of information from the literature is mostly based on keywords (KWs). I computed the chances of citation of one paper as 1/number of papers retrieved by the KWs published in that paper, and compared them with the chances obtained by selecting different KWs. Using generic KWs the chances are smaller, at times practically nil, as compared to those calculated with more specific KWs and their association. Selecting scientifically-analyzed KWs, specific for the message conveyed by a paper and computing beforehand the theoretical chances of citation, might increase the citations obtained, the retrieval of important scientific and innovative information, optimize scientific exchange and qualitative productivity. LEARNING POINTS. Copyright © 2018 European Federation of Internal Medicine. Published by Elsevier B.V. All rights reserved.

Production of TiO2 films with bactericidal properties deposited on paper substrate

Energy Technology Data Exchange (ETDEWEB)

Lisboa, A.J.T.; Vasconcelos, J.S.; Vasconcelos, A.C.S.; Vasconcelos, N.S.L.S.; Rangel, J.H.G.; Oliveira, M.M.O. [Universidade Federal do Maranha (UFMA), MA (Brazil); Longo, E.; Varela, J. A. [Universidade Estadual Paulista Julio de Mesquita Filho (UNESP), SP (Brazil)

2014-07-01

The main objective of this work was to obtain anatase-phase titanium oxide films deposited on paper substrates, using the polymeric precursor (Pechini) method. The oxide was mixed with a polyvinyl alcohol (PVA) solution and deposited on a paper substrate. The samples were then characterized by X-ray diffraction (XRD), field emission gun scanning electron microscopy (FEG-SEM), and energy dispersive spectroscopy (EDS), to check their surface phase. Bactericidal assays using Staphylococcus aureus and Escherichia coli bacteria for the anatase TiO2 film deposited on paper substrate indicated that the method was efficient, since the bacteria were eliminated after a given exposure time. However, the method proved to be more efficient when exposing samples contaminated with E. coli to UV irradiation for 30 and 45 min and then to sunlight for 90 min, since this resulted in the elimination of all the bacteria. (author)

Production of TiO2 films with bactericidal properties deposited on paper substrate

International Nuclear Information System (INIS)

Lisboa, A.J.T.; Vasconcelos, J.S.; Vasconcelos, A.C.S.; Vasconcelos, N.S.L.S.; Rangel, J.H.G.; Oliveira, M.M.O.; Longo, E.; Varela, J. A.

2014-01-01

The main objective of this work was to obtain anatase-phase titanium oxide films deposited on paper substrates, using the polymeric precursor (Pechini) method. The oxide was mixed with a polyvinyl alcohol (PVA) solution and deposited on a paper substrate. The samples were then characterized by X-ray diffraction (XRD), field emission gun scanning electron microscopy (FEG-SEM), and energy dispersive spectroscopy (EDS), to check their surface phase. Bactericidal assays using Staphylococcus aureus and Escherichia coli bacteria for the anatase TiO2 film deposited on paper substrate indicated that the method was efficient, since the bacteria were eliminated after a given exposure time. However, the method proved to be more efficient when exposing samples contaminated with E. coli to UV irradiation for 30 and 45 min and then to sunlight for 90 min, since this resulted in the elimination of all the bacteria. (author)

An Explanatory Study of Lean Practices in Job Shop Production/ Special Job Production/ Discrete Production/ Batch Shop Production Industries

OpenAIRE

Lavlesh Kumar Sharma; Ravindra Mohan Saxena

2014-01-01

In this paper, the study explores the benefits and advantages of Lean Practices or Lean Thinking in Job shop production/ Special job production/ Discrete production/ Batch shop production industries. The Lean Practices have been applied more compatible in Job shop production than in the continuous/ mass production because of several barriers and hurdles in the industrial context that influence the whole processes again and again, this happens due to the lack of knowledge about...

Measurement of sustainability index among paper manufacturing plants

Science.gov (United States)

Sharathkumar Reddy, V.; Jayakrishna, K.; Lal, Babu

2017-11-01

The paper manufacturing companies are facing challenges to implement sustainable manufacturing into their products and processes. Paper manufacturing has remarked as an intensive consumer of natural raw materials, energy and a major source of multiple pollutants. Thus, evaluating the sustainable manufacturing in these companies has become a necessity. This paper proposes a set of Performance Indicators (PIs) for evaluating the sustainable manufacturing appropriate to the paper manufacturing companies based on the triple bottom line of sustainability. The Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS), a multi-criteria decision analysis method is applied to prioritize the performance indicators by summarizing the opinions of stakeholders. It is hoped that the proposed PIs enables and assists the paper manufacturing companies to achieve the higher performance in sustainable manufacturing and so as to increase their competitiveness.

Space tourism: A flight of fantasy or the next major space product? Paper session 3: Products

Science.gov (United States)

Stone, Barbara A.

1994-01-01

In the euphoria of the early 1980's, a number of creative proposals for nontraditional uses of space were suggested. Taking tourists to space, possibly as early as the 1990's, was one such proposal. While it is now obvious that wherever explorers go, tourists (and hoteliers, restauranteurs, and tour guides) will someday follow. This paper discusses past and present efforts to promote space as a tourist destination.

Plastic coating on paper by electron beam irradiation

International Nuclear Information System (INIS)

Ametani, Kazuo; Tsuchiya, Mitsuaki; Sawai, Takeshi

1984-01-01

It has been known long since that the resin system of unsaturated polyester and vinylmonomer mixture cures by irradiation. Ford of USA for the first time industrialized the radiation curing reaction of resins for the coating of automobile parts. Thereafter, accompanying the development and technical advance of the low energy electron beam irradiation apparatus which is suitable to surface treatment such as coating and easy to handle and the development of resins, the electron beam curing method has become to be utilized for coating hardboard and wooden doors, coating automobile tire rims, adhering printing papers and others. The electron beam curing method has advantage such as energy conservation, resource saving and little pollution because solvent is not used, high production rate and small floor space. In glossing industry, for the purpose of developing the techniques to apply electron beam curing method to glazed paper production, the selection of the composition of resins suitable to glazed papers, the irradiating condition and the properties of cured films were examined. The films withstanding bending can be obtained at low dose with urethane group, ester group or the combination of monomers. (Kako, I.)

Application of lean six sigma to waste minimization in cigarette paper industry

Science.gov (United States)

Syahputri, K.; Sari, R. M.; Anizar; Tarigan, I. R.; Siregar, I.

2018-02-01

The cigarette paper industry is one of the industry that is always experiencing increasing demand from consumers. Consumer expectations for the products produced also increased both in terms of quality and quantity. The company continuously improves the quality of its products by trying to minimize nonconformity, waste and improve the efficiency of the whole production process of the company. In this cigarette industry, there is a disability whose value is above the company’s defect tolerance that is 10% of the production amount per month. Another problem also occurs in the production time is too long due to the many activities that are not value added (non value added activities) on the production floor. To overcome this problem, it is necessary to improve the production process of cigarette paper and minimize production time by reducing non value added activities. Repairs done with Lean Six Sigma. Lean Six Sigma is a combination of Lean and Six Sigma concept with DMAIC method (Define, Measure, Analyze, Improve, Control). With this Lean approach, obtained total production time of 1479.13 minutes proposal with cycle efficiency process increased by 12.64%.

Papers

DEFF Research Database (Denmark)

Thoft-Christensen, Palle

The chapters in this Volume 7 of a series of PAPERS are based on papers published in the period 2004 - 2008 authored/co-authored by Palle Thoft-Christensen......The chapters in this Volume 7 of a series of PAPERS are based on papers published in the period 2004 - 2008 authored/co-authored by Palle Thoft-Christensen...

Features in ammonia plant for maximising heavy water production (Paper No. 2.10)

International Nuclear Information System (INIS)

Tangri, N.N.; Singh, R.J.; Mukherjee, P.K.; Mishra, B.N.

1992-01-01

Whenever an ammonia plant is linked with heavy water production, a system should be foreseen in the design stage itself for total conservation of D 2 in synthesis gas and zero D 2 loss. The process should ensure recycle of D 2 rich condensate within the front end. This alone would be the single most important factor for improving heavy water production rate. The synthesis loop pressure should be chosen keeping in view the interest of heavy water plant (HWP). With vast experience in engineering NH 3 and HWP plants, it is possible to integrate HWP requirements at the design stage itself. (author)

Software product quality measurement

OpenAIRE

Godliauskas, Eimantas

2016-01-01

This paper analyses Ruby product quality measures, suggesting three new measures for Ruby product quality measurement tool Rubocop to measure Ruby product quality characteristics defined in ISO 2502n standard series. This paper consists of four main chapters. The first chapter gives a brief view of software product quality and software product quality measurement. The second chapter analyses object oriented quality measures. The third chapter gives a brief view of the most popular Ruby qualit...

76 FR 50998 - Certain Lined Paper Products From People's Republic of China: Initiation and Preliminary Results...

Science.gov (United States)

2011-08-17

...''). AASPS claims that producers accounting for substantially all of the production of the domestic like... definition, the actual use of or labeling these products as school supplies or non- school supplies is not a... determines that producers accounting for substantially all of the production of the domestic like product...

Fermentation and chemical treatment of pulp and paper mill sludge

Science.gov (United States)

Lee, Yoon Y; Wang, Wei; Kang, Li

2014-12-02

A method of chemically treating partially de-ashed pulp and/or paper mill sludge to obtain products of value comprising taking a sample of primary sludge from a Kraft paper mill process, partially de-ashing the primary sludge by physical means, and further treating the primary sludge to obtain the products of value, including further treating the resulting sludge and using the resulting sludge as a substrate to produce cellulase in an efficient manner using the resulting sludge as the only carbon source and mixtures of inorganic salts as the primary nitrogen source, and including further treating the resulting sludge and using the resulting sludge to produce ethanol.

ETHANOL PRODUCTION FROM THE MIXTURE OF HEMICELLULOSE PREHYDROLYSATE AND PAPER SLUDGE

OpenAIRE

Li Kang,; Yoon Y. Lee,; Sung-Hoon Yoon,; Allen J. Smith,; Gopal A. Krishnagopalan

2012-01-01

Much of the hemicellulose fraction of pulp mill feedstock is released into black liquor during the pulping process, and it is combusted to recover chemicals and energy in the form of steam and electricity. It is technically feasible to recover this fraction of carbohydrates and convert it into value-added products. In this study, a portion of the hemicellulose in pulp feed was hydrolyzed to soluble sugars by hot-water treatment. The sugars (mixtures of pentose, hexose, and their oligomers) we...

The Fractionation of Loblolly Pine Woodchips Into Pulp For Making Paper Products

Energy Technology Data Exchange (ETDEWEB)

Kiran Kadam, PhD

2006-11-30

The overall goal of the project was to test the PureVision biomass fractionation technology for making pulp from loblolly pine. A specific goal was to produce a pulp product that is comparable to pulp produced from the kraft process, while reducing the environmental effects of the kraft process, known to be a highly pollutant process. The overall goal of the project was met by using the biomass fractionation concept for making pulp product. This proof-of-concept study, done with Southern pine pinchips as feedstock, evaluated NaOH concentration and residence time as variables in single-stage cocurrent pulping process. It can be concluded that 1% NaOH is adequate for effective delignification using the PureVision process; this is about 1/3 of that used in the kraft process. Also, the PureVision process does not use sulfur-based chemicals such as N2S and hence, is environmentally more benign.

System analysis of environmental impacts of the combustion of waste paper

International Nuclear Information System (INIS)

Palanterae, R.

1996-01-01

Combustion alternatives of different waste paper grades that are unsuitable or difficult to recycle were studied. Environmental impacts of alternative methods of waste paper treatment - combustion, dump disposal and use for fibre raw material - were studied with the aid of system analysis. Use of waste paper for energy production is usually recommended when there is oversupply of waste paper or it is unsuitable for recycled pulp. On the basis of certain studies it has also been suggested that it would be most profitable to use all waste paper as fuel. Refused tight paper rolls, baled brown paper and a mixture of adhesive paper and crushed building waste wood were chosen for waste paper in the combustion tests. The tests were run in the fluidised-bed combustion boiler of Maentaen Energia Oy. The mass flow of paper was about 3 t/h and its proportion of the fuel efficiency on average 20%. Prior to each paper combustion test, a blank trial was run with pure peat. The combustion tests indicated that flue gas emissions are not reduced by using paper instead of peat for energy production, but their composition is changed slightly. When the environmental effects of the use of waste paper for energy were compared with those of landfill dumping, the most significant difference was a reduction in greenhouse gases. The amount of methane emitted from the landfill will reduce. Differences in other emissions, e.g., in acidification due to SO 2 and NO 2 emissions, were rather small. The amount of solid waste was significantly lower in the combustion alternative. (38 refs.)

78 FR 40101 - Certain Tissue Paper Products from the People's Republic of China: Affirmative Final...

Science.gov (United States)

2013-07-03

... subject to the order are cut-to-length sheets of tissue paper having a basis weight not exceeding 29 grams... determine that tissue paper processed by ARPP in India from PRC-origin jumbo rolls and/or cut sheets of...-origin tissue paper (jumbo rolls and/or cut sheets) that were entered, or withdrawn from warehouse, for...

Impact of product development efforts on product introduction and product customization abilities

DEFF Research Database (Denmark)

Chaudhuri, Atanu; Dawar, Saloni

2014-01-01

This paper investigates the impact of efforts in new product development-manufacturing integration (NPDMI) on new product introduction (NPI) and product customization (PC) abilities and the moderating effects of product design complexity and importance of new product development order winners...... (NPIOW) on the above relationships. The results from the data on 136 Indian manufacturing plants show that NPDMI, product design complexity and NPIOW all have significant positive impact on NPI and PC abilities. Importance of NPIOW has a positive moderating effect on the relationship between NPDMI and PC...... ability change but product design complexity demonstrate no such effect on the above relationships....

Realizing the Living Paper using the ProvONE Model for Reproducible Research

Science.gov (United States)

Jones, M. B.; Jones, C. S.; Ludäscher, B.; Missier, P.; Walker, L.; Slaughter, P.; Schildhauer, M.; Cuevas-Vicenttín, V.

2015-12-01

Science has advanced through traditional publications that codify research results as a permenant part of the scientific record. But because publications are static and atomic, researchers can only cite and reference a whole work when building on prior work of colleagues. The open source software model has demonstrated a new approach in which strong version control in an open environment can nurture an open ecosystem of software. Developers now commonly fork and extend software giving proper credit, with less repetition, and with confidence in the relationship to original software. Through initiatives like 'Beyond the PDF', an analogous model has been imagined for open science, in which software, data, analyses, and derived products become first class objects within a publishing ecosystem that has evolved to be finer-grained and is realized through a web of linked open data. We have prototyped a Living Paper concept by developing the ProvONE provenance model for scientific workflows, with prototype deployments in DataONE. ProvONE promotes transparency and openness by describing the authenticity, origin, structure, and processing history of research artifacts and by detailing the steps in computational workflows that produce derived products. To realize the Living Paper, we decompose scientific papers into their constituent products and publish these as compound objects in the DataONE federation of archival repositories. Each individual finding and sub-product of a reseach project (such as a derived data table, a workflow or script, a figure, an image, or a finding) can be independently stored, versioned, and cited. ProvONE provenance traces link these fine-grained products within and across versions of a paper, and across related papers that extend an original analysis. This allows for open scientific publishing in which researchers extend and modify findings, creating a dynamic, evolving web of results that collectively represent the scientific enterprise. The

Paper Circuits: A Tangible, Low Threshold, Low Cost Entry to Computational Thinking

Science.gov (United States)

Lee, Victor R.; Recker, Mimi

2018-01-01

In this paper, we propose that paper circuitry provides a productive space for exploring aspects of computational thinking, an increasingly critical 21st century skills for all students. We argue that the creation and operation of paper circuits involve learning about computational concepts such as rule-based constraints, operations, and defined…

Artificial Aging as a Predictor of Paper's Future Useful Life.

Science.gov (United States)

Bansa, Helmut; Hofer, Hans-H.

1989-01-01

An experiment with the artificial aging of paper which--in contrast with the usual practice--was carried out at relatively low temperatures (i.e., 50-95 degrees Celsius), and not on laboratory handsheets, but on naturally aged paper from the commercial production of four centuries, produced results justifying the thesis that there may be at best…

Environmental Management Systems in The Pulp and Paper Industry

Directory of Open Access Journals (Sweden)

Alessandra Buss Tessaro

2013-12-01

Full Text Available At the currently moment companies tend to seek a differential to compete in the market, emerging the environment as one of them. Environmental quality norms surged in the manufacturing process of products and inputs, being the protection to consumer one of the main benefits of normalization, once it standardized requirements to establish the quality of products and services. ISO 14.001 offers guidelines for environmental management systems, using auditing as a tool for verifying the effectiveness of management systems. This research targeted to analyze the use of environmental auditing by the cellulose and paper companies as a supportive tool in environmental management, investigate the reasons of usage as well as the benefits generated by it along with ABTCP, BRACELPA and SINPASUL. This study shows that the cellulose and paper companies that have invested in the production ecologically correct are achieving good results, financially and competitive. It is clear in the research that independently of the size of the company these results can be achieved for all the companies by adopting environmental auditing.

Labor Market Frictions and Production Efficiency in Public Schools. Working Paper 163

Science.gov (United States)

Kim, Dongwoo; Koedel, Cory; Ni, Shawn; Podgursky, Michael

2016-01-01

State-specific licensing policies and pension plans create mobility costs for educators who cross state lines. We empirically test whether these costs affect production in schools--a hypothesis that follows directly from economic theory on labor frictions--using geo-coded data from the lower-48 states. We find that achievement is lower in…

Sustainability of energy crops. Four papers by the Centre for Agriculture and Environment

International Nuclear Information System (INIS)

Hanegraaf, M.C.; Van Kuik, M.; Van Zeijts, H.

1998-07-01

Between 1994 and 1996 CLM developed a method for assessing the ecological and economic sustainability of producing and using energy from agricultural and forest biomass. The method has much in common with environmental life cycle assessment (LCA). CLM has also co-ordinated a concerted action called 'Environmental aspects of biomass production and routes for European energy supply'. LCA is at present the best available instrument for assessing the ecological sustainability of energy crops. CLM focused on three topics disseminating the results of the concerted action; updating the work on bioethanol, and proposals for new financial instruments. The results are presented in this report. First, the results from the concerted action and work carried out by CLM were disseminated. Papers were presented at the international conference on 'Implementation of solid biofuels for carbon dioxide mitigation', 29-30 September 1997, Uppsala, Sweden, and at the international workshop on 'Environmental aspects of energy crop production', 9-10 October 1997, Brasimone, Italy. In addition, a paper was written on the need to co-ordinate policy options to stimulate the production and use of energy crops from an energy, agricultural and environmental point of view. Second, a study on bioethanol was carried out in which data obtained elsewhere on the use of bioethanol as a transport fuel were revised and updated. The sustainability of bioethanol production from sugar beet was compared with that of bioethanol from winter wheat. Using bioethanol from sugar beet replaces more fossil energy than bioethanol from winter wheat. For both crops, the costs per ton avoided CO2 decrease over time to 2010, but are still higher than electricity routes. The third action was the development of proposals for new financial instruments to stimulate energy production from biomass in the agricultural and forestry sector. This proposal was presented at the ALTENER Seminar on 'Financial incentives for

Microalgal biomass and lipid production in mixed municipal, dairy, pulp and paper wastewater together with added flue gases.

Science.gov (United States)

Gentili, Francesco G

2014-10-01

The aim of the study was to grow microalgae on mixed municipal and industrial wastewater to simultaneously treat the wastewater and produce biomass and lipids. All algal strains grew in all wastewater mixtures; however, Selenastrum minutum had the highest biomass and lipids yields, up to 37% of the dry matter. Nitrogen and phosphorus removal were high and followed a similar trend in all three strains. Ammonium was reduced from 96% to 99%; this reduction was due to algal growth and not to stripping to the atmosphere, as confirmed by the amount of nitrogen in the dry algal biomass. Phosphate was reduced from 91% to 99%. In all strains used the lipid content was negatively correlated to the nitrogen concentration in the algal biomass. Mixtures of pulp and paper wastewater with municipal and dairy wastewater have great potential to grow algae for biomass and lipid production together with effective wastewater treatment. Copyright © 2014 Elsevier Ltd. All rights reserved.

Rapid Analysis of Bisphenol A and Its Analogues in Food Packaging Products by Paper Spray Ionization Mass Spectrometry.

Science.gov (United States)

Chen, Shuo; Chang, Quanying; Yin, Kai; He, Qunying; Deng, Yongxiu; Chen, Bo; Liu, Chengbin; Wang, Ying; Wang, Liping

2017-06-14

In this study, a paper spray ionization mass spectrometric (PS-MS) method was developed for the rapid in situ screening and simultaneous quantitative analysis of bisphenol A and its analogues, i.e., bisphenol S, bisphenol F, and bisphenol AF, in food packaging products. At the optimal PS-MS conditions, the calibration curves of bisphenols in the range of 1-100 μg/mL were linear. The correlation coefficients were higher than 0.998, and the LODs of the target compounds were 0.1-0.3 μg/mL. After a simple treatment by dichloromethane on the surface, the samples were analyzed by PS-MS in situ for rapid screening without a traditional sample pretreatment procedure, such as powdering, extraction, and enrichment steps. The analytical time of the PS-MS method was less than 1 min. In comparison with conventional HPLC-MS/MS, it was demonstrated that PS-MS was a more effective high-throughput screening and quantitative analysis method.

Physical disintegration of toilet papers in wastewater systems: experimental analysis and mathematical modeling.

Science.gov (United States)

Eren, Beytullah; Karadagli, Fatih

2012-03-06

Physical disintegration of representative toilet papers was investigated in this study to assess their disintegration potential in sewer systems. Characterization of toilet papers from different parts of the world indicated two main categories as premium and average quality. Physical disintegration experiments were conducted with representative products from each category according to standard protocols with improvements. The experimental results were simulated by mathematical model to estimate best-fit values of disintegration rate coefficients and fractional distribution ratios. Our results from mathematical modeling and experimental work show that premium products release more amounts of small fibers and disintegrate more slowly than average ones. Comparison of the toilet papers with the tampon applicators studied previously indicates that premium quality toilet papers present significant potential to persist in sewer pipes. Comparison of turbulence level in our experimental setup with those of partial flow conditions in sewer pipes indicates that drains and small sewer pipes are critical sections where disintegration of toilet papers will be limited. For improvement, requirements for minimum pipe slopes may be increased to sustain transport and disintegration of flushable products in small pipes. In parallel, toilet papers can be improved to disintegrate rapidly in sewer systems, while they meet consumer expectations.

Recent research efforts in the area of biotechnology for fuels and chemicals: Poster session papers

Energy Technology Data Exchange (ETDEWEB)

Antonopoulos, A.A. [Argonne National Lab., IL (United States); Grohmann, K. [US Citrus and Subtropical Products Lab., Winter Haven, FL (United States)

1992-09-01

This report presents research presented at the poster session of the Symposium covering a wide spectrum of current biotechnological research activities. Research focused mostly on ethanol production and methane generation from biomass material via microbial processing, as well as on enhanced hydrogen yield from algae. Several of the posters dealt with the pretreatment of cellulosic materials, and enzyme production/characterization, while a good number of papers displayed research efforts on bioremediation, photosynthesis, production of various useful chemicals from biomass by bioprocessing, and on other miscellaneous subjects. One of the papers treated a very interesting topic of cellulose-cellulase complexes. Many of the poster papers are included in this volume, and a synopsis of all the poster/papers presented is the subject of this article.

Recent research efforts in the area of biotechnology for fuels and chemicals: Poster session papers

Energy Technology Data Exchange (ETDEWEB)

Antonopoulos, A.A. (Argonne National Lab., IL (United States)); Grohmann, K. (US Citrus and Subtropical Products Lab., Winter Haven, FL (United States))

1992-01-01

This report presents research presented at the poster session of the Symposium covering a wide spectrum of current biotechnological research activities. Research focused mostly on ethanol production and methane generation from biomass material via microbial processing, as well as on enhanced hydrogen yield from algae. Several of the posters dealt with the pretreatment of cellulosic materials, and enzyme production/characterization, while a good number of papers displayed research efforts on bioremediation, photosynthesis, production of various useful chemicals from biomass by bioprocessing, and on other miscellaneous subjects. One of the papers treated a very interesting topic of cellulose-cellulase complexes. Many of the poster papers are included in this volume, and a synopsis of all the poster/papers presented is the subject of this article.

Abstracts and papers of the 1999 International RERTR Meeting

International Nuclear Information System (INIS)

1999-10-01

The papers presented at the 22nd International RERTR Meeting dealt with the following topics: development and testing of new fuel elements (uranium-molybdenum alloys); research reactors core conversion studies (change from highly to moderately or slightly enriched uranium), including both measurements and calculations: spent fuel storage and transportation; production of 99 Mo from low enriched uranium. A number of papers were devoted to the status and future of national RERTR programs

Laboratory Development of A High Capacity Gas-Fired paper Dryer

Energy Technology Data Exchange (ETDEWEB)

Chudnovsky, Yaroslav [Gas Technology Institute, Des Plaines, IL (United States); Kozlov, Aleksandr [Gas Technology Institute, Des Plaines, IL (United States); Sherrow, Lester [Gas Technology Institute, Des Plaines, IL (United States)

2005-09-30

Paper drying is the most energy-intensive and temperature-critical aspect of papermaking. It is estimated that about 67% of the total energy required in papermaking is used to dry paper. The conventional drying method uses a series of steam-heated metal cylinders that are required to meet ASME codes for pressure vessels, which limits the steam pressure to about 160 psig. Consequently, the shell temperature and the drying capacity are also limited. Gas Technology Institute together with Boise Paper Solutions, Groupe Laparrier and Verreault (GL&V) USA Inc., Flynn Burner Corporation and with funding support from the U.S. Department of Energy, U.S. natural gas industry, and Gas Research Institute is developing a high efficiency gas-fired paper dryer based on a combination of a ribbon burner and advanced heat transfer enhancement technique. The Gas-Fired Paper Dryer (GFPD) is a high-efficiency alternative to conventional steam-heated drying drums that typically operate at surface temperatures in the 300ºF range. The new approach was evaluated in laboratory and pilot-scale testing at the Western Michigan University Paper Pilot Plant. Drum surface temperatures of more than 400ºF were reached with linerboard (basis weight 126 lb/3000 ft2) production and resulted in a 4-5 times increase in drying rate over a conventional steam-heated drying drum. Successful GFPD development and commercialization will provide large energy savings to the paper industry and increase paper production rates from dryer-limited (space- or steam-limited) paper machines by an estimated 10 to 20%, resulting in significant capital costs savings for both retrofits and new capacity.

Feasible Application Area Study for Linear Laser Cutting in Paper Making Processes

Science.gov (United States)

Happonen, A.; Stepanov, A.; Piili, H.

Traditional industry sectors, like paper making industry, tend to stay within well-known technology rather than going forward towards promising, but still quite new technical solutions and applications. This study analyses the feasibility of the laser cutting in large-scale industrial paper making processes. Aim was to reveal development and process related challenges and improvement potential in paper making processes by utilizing laser technology. This study has been carried out, because there still seems to be only few large-scale industrial laser processing applications in paper converting processes worldwide, even in the beginning of 2010's. Because of this, the small-scale use of lasers in paper material manufacturing industry is related to a shortage of well-known and widely available published research articles and published measurement data (e.g. actual achieved cut speeds with high quality cut edges, set-up times and so on). It was concluded that laser cutting has strong potential in industrial applications for paper making industries. This potential includes quality improvements and a competitive advantage for paper machine manufacturers and industry. The innovations have also added potential, when developing new paper products. An example of these kinds of products are ones with printed intelligence, which could be a new business opportunity for the paper industries all around the world.

The safety of fishery products

OpenAIRE

Zugravu Gheorghe, Adrian; Turek Rahoveanu, Maria Magdalena; Turek Rahoveanu, Adrian

2012-01-01

The paper follows two main objectives: to understand consumers' perception and image of fishery products and to identify communication levers in order to improve the perceived image of fishery products. Orientations in terms of communication are product-focused and aim at enhancing the reputation of products, consequently with impact on product consumption. The present research is focused on the fishery products, regardless of their presentation - fresh, frozen or processed. This paper conduc...

Global product development

DEFF Research Database (Denmark)

Hansen, Zaza Nadja Lee; Ahmed-Kristensen, Saeema

2011-01-01

Globalisation has enabled companies to globalise their product development process. Today, everything from manufacturing to R&D can be globally distributed. This has led to a more complex and disintegrated product development process. This paper investigates the impacts companies have experienced...... operational solutions to counteract the negative impacts with varying degrees of success. This paper presents a unique look into global product development through an investigation of its impact on the organisation, the product development process, and the product. Furthermore, it shows the solutions...... as a result of this, and how they have been addressed. Data was collected through case studies of five Danish multinational corporations. The findings showed that the companies experienced several challenges when they globalised their product development process. They consequently implemented various...

Economic Analysis of Education: A Conceptual Framework. Theoretical Paper No. 68.

Science.gov (United States)

Rossmiller, Richard A.; Geske, Terry G.

This paper discusses several concepts and techniques from the areas of systems theory and economic analysis that can be used as tools in an effort to improve the productivity of the educational enterprise. Several studies investigating productivity in education are reviewed, and the analytical problems in conducting cost-effectiveness studies are…

Green product development : What does the country product space imply?

NARCIS (Netherlands)

Fraccascia, Luca; Giannoccaro, Ilaria; Albino, Vito

This paper contributes to green product development by identifying the green products with the highest potential for growth in a country. To address our aim, we use the concept of product proximity and product space and, borrowing from the results of recent studies on complexity economics, we

Advances in production technology

CERN Document Server

2015-01-01

This edited volume contains the selected papers presented at the scientific board meeting of the German Cluster of Excellence on “Integrative Production Technology for High-Wage Countries”,  held in November 2014. The topical structure of the book is clustered in six sessions: Integrative Production Technology, Individualised Production, Virtual Production Systems, Integrated Technologies, Self-Optimising Production Systems and Human Factors in Production Technology. The Aachen perspective on a holistic theory of production is complemented by conference papers from external leading researchers in the fields of production, materials science and bordering disciplines. The target audience primarily comprises research experts and practitioners in the field but the book may also be beneficial for graduate students.

Thin, Flexible Secondary Li-Ion Paper Batteries

KAUST Repository

Hu, Liangbing

2010-10-26

There is a strong interest in thin, flexible energy storage devices to meet modern society needs for applications such as interactive packaging, radio frequency sensing, and consumer products. In this article, we report a new structure of thin, flexible Li-ion batteries using paper as separators and free-standing carbon nanotube thin films as both current collectors. The current collectors and Li-ion battery materials are integrated onto a single sheet of paper through a lamination process. The paper functions as both a mechanical substrate and separator membrane with lower impedance than commercial separators. The CNT film functions as a current collector for both the anode and the cathode with a low sheet resistance (∼5 Ohm/sq), lightweight (∼0.2 mg/cm2), and excellent flexibility. After packaging, the rechargeable Li-ion paper battery, despite being thin (∼300 μm), exhibits robust mechanical flexibility (capable of bending down to <6 mm) and a high energy density (108 mWh/g). © 2010 American Chemical Society.

Universal industrial sectors integrated solutions module for the pulp and paper industry.

Science.gov (United States)

Bhander, Gurbakhash; Jozewicz, Wojciech

2017-09-01

The U.S. is the world's second-leading producer of pulp and paper products after China. Boilers, recovery furnaces, and lime kilns are the dominant sources of emissions from pulp and paper mills, collectively accounting for more than 99 % of the SO 2 , almost 96 % of the NO X , and more than 85 % of the particulate matter (PM) emitted to the air from this sector in the U.S. The process of developing industrial strategies for managing emissions can be made efficient, and the resulting strategies more cost-effective, through the application of modeling that accounts for relevant technical, environmental and economic factors. Accordingly, the United States Environmental Protection Agency is developing the Universal Industrial Sectors Integrated Solutions module for the Pulp and Paper Industry (UISIS-PNP). It can be applied to evaluate emissions and economic performance of pulp and paper mills separately under user-defined pollution control strategies. In this paper, we discuss the UISIS-PNP module, the pulp and paper market and associated air emissions from the pulp and paper sector. After illustrating the sector-based multi-product modeling structure, a hypothetical example is presented to show the engineering and economic considerations involved in the emission-reduction modeling of the pulp and paper sector in the U.S.

A product feature-based user-centric product search model

OpenAIRE

Ben Jabeur, Lamjed; Soulier, Laure; Tamine, Lynda; Mousset, Paul

2016-01-01

During the online shopping process, users would search for interesting products and quickly access those that fit with their needs among a long tail of similar or closely related products. Our contribution addresses head queries that are frequently submitted on e-commerce Web sites. Head queries usually target featured products with several variations, accessories, and complementary products. We present in this paper a product feature-based user-centric model for product search involving in a...

Quantification of chemical contaminants in the paper and board fractions of municipal solid waste

DEFF Research Database (Denmark)

Pivnenko, Kostyantyn; Olsson, Mikael Emil; Götze, Ramona

2016-01-01

on the production technology or the potential end-use of the material. Paper has been previously shown to potentially contain a large variety of chemicals. Quantitative data on the presence of chemicals in paper are necessary for appropriate waste paper management, including the recycling and re-processing of paper......Chemicals are used in materials as additives in order to improve the performance of the material or the production process itself. The presence of these chemicals in recyclable waste materials may potentially affect the recyclability of the materials. The addition of chemicals may vary depending....... However, a lack of quantitative data on the presence of chemicals in paper is evident in the literature. The aim of the present work is to quantify the presence of selected chemicals in waste paper derived from households. Samples of paper and board were collected from Danish households, including both...

Leading co-production

DEFF Research Database (Denmark)

Tortzen, Anne

leadership styles executed by public managers affect the quality and public value of co-production processes? The paper argues that publicly initiated co-production initiatives are influenced by conflicting governance logics placing public managers in an institutional cross pressure (Lowndes & Roberts, 2013...... of building networks and relations, developing trust and focusing on empowerment and on the participants' resources to develop innovative solutions Drawing on three qualitative case studies of ‘most likely' co-production cases in Danish municipalities, the study identifies three different leadership styles...... and increase public value (Bovaird & Löffler, 2012; Osborne, 2010). The paper argues that a deeper understanding of the dynamics of co-production can be gained from analyzing the leadership dimension of co-production processes, which has hitherto not been given much attention by co-production researchers...

Beyond Research Productivity: Matching Productivity Measures to Institutional Mission

Directory of Open Access Journals (Sweden)

Patricia Bartholomew

2016-11-01

Full Text Available Aim/Purpose: The aim of this paper is to develop a unified methodology inclusive of the three primary areas of faculty responsibility (teaching, research, and service to calculate departmental productivity that fills the gap in methodological bench-marking tools for overall faculty productivity. Background:\tA disproportionate number of departmental and faculty productivity indices in higher education rely solely on research. Productivity in other areas of faculty workload areas, like teaching and institutional and community service, are either measured separately or ignored all together – even when those activities are institutionally mandated. This does a disservice to those who work in those institutions and skews incentives. Methodology: This paper utilizes a unified methodology inclusive of the three primary areas of faculty responsibility (teaching, research, and service to calculate depart-mental productivity in five disparate departments (English, Biology, Mathematics, Sociology, and Computer Science common to two universities with differing missions (teaching and service. Findings: The results reveal the bias inherent in relying solely on research as a proxy for overall productivity in institutions that have differing missions. Recommendations for Practitioners: Utilizing better metrics informs higher education administrators, promotes better decision-making, and allows incentives to re-align with desired outcomes. Recommendation for Researchers: This paper recommends combing all aspects of faculty workload into a single benchmark index to better measure departmental productivity. Future Research: Further research into improving this simple index is warranted and would include how to account for quality and other facets of productivity.

Non-Production Benefits of Education: Crime, Health, and Good Citizenship. NBER Working Paper No. 16722

Science.gov (United States)

Lochner, Lance

2011-01-01

A growing body of work suggests that education offers a wide-range of benefits that extend beyond increases in labor market productivity. Improvements in education can lower crime, improve health, and increase voting and democratic participation. This chapter reviews recent developments on these "non-production" benefits of education with an…

Cornstarch complexed with a soybean oil component imparts water resistance to paper

Science.gov (United States)

The increasing trend of using paper instead of plastic for many products for environmental and sustainability reasons has generated much interest new technologies for making paper water resistant. Most of the widely used methods and recent reports involve the use of non-biobased, synthetic materials...

Productivity raising approaches in the logistic production system

Directory of Open Access Journals (Sweden)

Miroslav Rakyta

2001-01-01

Full Text Available This paper deals with the productivity of the logistic production system. The aim is to define the intermediate state of the production machines and equipment (OOE, identification of the material flows, idle time and breakdown forecasting, with the following purchase of the required spare parts. The goal of the system is the satisfaction of the customer´s needs and the minimalisation of not fulfilling the required terms for delivery with simultaneous increasing of the logistic production system productivity.

76 FR 60803 - Certain Lined Paper Products From People's Republic of China: Final Results of Antidumping Duty...

Science.gov (United States)

2011-09-30

... that producers accounting for substantially all of the production of the domestic like product to which... supplies (for purposes of this scope definition, the actual use of or labeling these products as school... interest and claimed that parties accounting for more than 85 percent of production of the domestic like...

Using Paper Helicopters to Teach Statistical Process Control

Science.gov (United States)

Johnson, Danny J.

2011-01-01

This hands-on project uses a paper helicopter to teach students how to distinguish between common and special causes of variability when developing and using statistical process control charts. It allows the student to experience a process that is out-of-control due to imprecise or incomplete product design specifications and to discover how the…

Quantitative Evaluation of Iranian Radiology Papers and Its Comparison with Selected Countries

International Nuclear Information System (INIS)

Ghafoori, Mahyar; Emami, Hasan; Sedaghat, Abdolrasoul; Ghiasi, Mohammad; Shakiba, Madjid; Alavi, Manijeh

2014-01-01

Recent technological developments in medicine, including modern radiology have promoted the impact of scientific researches on social life. The scientific outputs such as article and patents are products that show the scientists’ attempt to access these achievements. In the current study, we evaluate the current situation of Iranian scientists in the field of radiology and compare it with the selected countries in terms of scientific papers. For this purpose, we used scientometric tools to quantitatively assess the scientific papers in the field of radiology. Radiology papers were evaluated in the context of medical field audit using retrospective model. We used the related databases of biomedical sciences for extraction of articles related to radiology. In the next step, the situation of radiology scientific products of the country were determined with respect to the under study regional countries. Results of the current study showed a ratio of 0.19% for Iranian papers in PubMed database published in 2009. In addition, in 2009, Iranian papers constituted 0.29% of the Scopus scientific database. The proportion of Iranian papers in the understudy region was 7.6%. To diminish the gap between Iranian scientific radiology papers and other competitor countries in the region and achievement of document 2025 goals, multifold effort of the society of radiology is necessary

Development of Production Systems

DEFF Research Database (Denmark)

Christiansen, Thomas Bøhm

1997-01-01

This paper presents the initial considerations related to a Ph.D. study initiated at IPV, DTU in February 1997, concerning the research subject "Development of Production Systems". The content and aim of this paper is to 1) to introduce the study by......This paper presents the initial considerations related to a Ph.D. study initiated at IPV, DTU in February 1997, concerning the research subject "Development of Production Systems". The content and aim of this paper is to 1) to introduce the study by...

Exploring Paper.

Science.gov (United States)

Brand, Judith, Ed.

1999-01-01

Exploratorium Magazine communicates ideas that exhibits cannot easily demonstrate, extending the museum beyond its physical walls. This issue takes an in-depth look at the science and history of paper. Topics include: (1) Fascinating Facts about Paper; (2) A Closer Look at the Paper in This Magazine; (3) Handmade Paper; (4) Paper Airplanes; (5)…

The water footprint of wood for lumber, pulp, paper, fuel and firewood

NARCIS (Netherlands)

Schyns, Joseph Franciscus; Booij, Martijn J.; Hoekstra, Arjen Y.

This paper presents the first estimate of global water use in the forestry sector related to roundwood production for lumber, pulp, paper, fuel and firewood. For the period 1961-2010, we estimate forest evaporation at a high spatial resolution level and attribute total water consumption to various

Pulp & paper markets cope with high energy prices and growth in Asia : markets for paper, paperboard and woodpulp, 2005-2006

Science.gov (United States)

Peter J. Ince

2006-01-01

\\tPulp and paper markets in the UNECE region were influenced by higher energy prices and demand growth in Asia in 2005 and 2006. Important developments in Europe included the launching of the EU Emissions Trading Scheme, which was followed by substantial increases in electrical energy prices. High global energy prices pushed up costs of production and prices for pulp...

Side-stream products of edible oil refining as feedstocks in biodiesel production

Directory of Open Access Journals (Sweden)

Cvetković Bojan S.

2016-01-01

Full Text Available Biodiesel, a diesel fuel alternative, is produced from vegetable oils and animal fats by the transesterification reaction of triacylglycerols and lower aliphatic alcohols. Beside number advantages related to fossil fuels, the main barrier to biodiesel wider commercial use is the high price of edible oils. Recently, the special attention was given to side-stream products of edible oil refining as low-cost triacylglycerol sources for biodiesel production because of their positive economic and ecological effects. In this paper, the different procedures for biodiesel production from side-stream refining products such as soapstock, spent bleaching earth and deodorizer distillate were analyzed. The main goal of this paper is to analyze the possibilities for reusing the by-products of edible oil refinement in the biodiesel production.

Mixed waste paper to ethanol fuel. A technology, market, and economic assessment for Washington

Energy Technology Data Exchange (ETDEWEB)

1991-01-01

The objectives of this study were to evaluate the use of mixed waste paper for the production of ethanol fuels and to review the available conversion technologies, and assess developmental status, current and future cost of production and economics, and the market potential. This report is based on the results of literature reviews, telephone conversations, and interviews. Mixed waste paper samples from residential and commercial recycling programs and pulp mill sludge provided by Weyerhauser were analyzed to determine the potential ethanol yields. The markets for ethanol fuel and the economics of converting paper into ethanol were investigated.

Paper electronics.

Science.gov (United States)

Tobjörk, Daniel; Österbacka, Ronald

2011-05-03

Paper is ubiquitous in everyday life and a truly low-cost substrate. The use of paper substrates could be extended even further, if electronic applications would be applied next to or below the printed graphics. However, applying electronics on paper is challenging. The paper surface is not only very rough compared to plastics, but is also porous. While this is detrimental for most electronic devices manufactured directly onto paper substrates, there are also approaches that are compatible with the rough and absorptive paper surface. In this review, recent advances and possibilities of these approaches are evaluated and the limitations of paper electronics are discussed. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Combination of microsized mineral particles and rosin as a basis for converting cellulosic fibers into "sticky" superhydrophobic paper.

Science.gov (United States)

Yu, Xiaoyan; Bian, Peiwen; Xue, Yang; Qian, Xueren; Yu, Haipeng; Chen, Wenshuai; Hu, Xiaohai; Wang, Peng; Wu, Dong; Duan, Qinghui; Li, Limei; Shen, Jing; Ni, Yonghao

2017-10-15

The unique features of cellulosic paper including flexibility, biodegradability, and low cost enables it as a versatile, sustainable biomaterial for promising applications. In the paper industry, microsized mineral particles are widely used in the production of printing/writing paper grades, while rosin derived from trees is the earliest internal sizing agent for paper hydrophobication. On the basis of existing commercial practices associated with the use of mineral particles and rosin in paper production, we present a process concept of converting cellulosic fibers (paper-grade pulp) into "sticky" superhydrophobic paper involving the use of microsized mineral particles and rosin (a tree-derived natural product, mainly a mixture of resin acids, especially abietic acid with chemical formula of C 19 H 29 COOH). Internal filling of cellulosic networks with mineral particles was basically used to hold out the mineral particles added at the surface, and the delicate integration of wet-end/surface applications of mineral particles with paper surface engineering with rosin/alum led to the development of "sticky" superhydrophobicity, i.e., ultrahigh water-repellency and strong adhesion to water. This proposed concept may provide valuable implications for expanding the use of paper-based products to unconventional applications, e.g., ultrahigh-performance ink jet printing paper for mitigating the "coffee-ring effect" and paper-based microfluidic devices for biomedical testing. Copyright © 2017 Elsevier Ltd. All rights reserved.

Reusing pulp and paper mill effluent as a bioresource to produce biohydrogen through ultrasonicated Rhodobacter sphaeroides

International Nuclear Information System (INIS)

Hay, Jacqueline Xiao Wen; Wu, Ta Yeong; Ng, Boon Junn; Juan, Joon Ching; Md Jahim, Jamaliah

2016-01-01

Highlights: • Ultrasonication pretreatment on R. sphaeroides enhanced biohydrogen production. • Pretreatment using amplitude 30% for 10 min gave the highest biohydrogen yield. • Pretreatment using amplitude 45% for 15 min inhibited biohydrogen production. - Abstract: Pulp and paper industry is a water-intensive industry. This industry commonly produces considerable amount of effluent, especially from virgin raw materials processing. The effluent, namely pulp and paper mill effluent has the potential to adversely affect the receiving watercourses. However, the nutrients in the pulp and paper mill effluent could be reused as a substrate in biohydrogen production. In this study, photofermentative biohydrogen production was investigated using Rhodobacter sphaeroides and pulp and paper mill effluent as a substrate. An application of low power ultrasound on R. sphaeroides was predicted to increase photofermentative biohydrogen production but excessive ultrasound effects might inhibit the production due to possible cell disruption. Hence, various ultrasonication duration (5, 10 and 15 min) and amplitude (15%, 30% and 45%) were applied on the bacteria to determine the recommended ultrasonication conditions for improving biohydrogen production. The recommended conditions were operated at ultrasonication amplitude and duration of 30% and 10 min, respectively. A maximum biohydrogen yield of 9.62 mL bioH_2/mL medium was obtained under this condition, which was 66.7% higher than the result obtained using R. sphaeroides without undergoing ultrasonication (control). The light efficiency and cell concentration were increased by 67% and 150%, respectively, using ultrasonication amplitude and duration of 30% and 10 min, respectively as compared to the control. The present results demonstrated that moderate power of ultrasonication applied on R. sphaeroides was an effective method for enhancing photofermentative biohydrogen production using raw pulp and paper mill effluent as a

PDT (Product Data Technology), Production and Society

DEFF Research Database (Denmark)

Vesterager, Johan

1997-01-01

Information and communication technology (ICT) constitute a genuine technical revolution by enabling a dynamic and flexible support or automation of knowledge and information work. Bearing in mind that products are frozen knowledge, ICT as known will change the way we produce products dramatically....... The use of ICT in engineering of products constitutes product data technology (PDT).This paper presents a a basic platform for an understanding the ongoing revolution with focus on the PDT-area taking outset in the fundamental elements of knowledge and information work: creation, transformation...

Impact of Physical Deformation on Electrical Performance of Paper-Based Sensors

KAUST Repository

Nassar, Joanna M.

2017-01-23

We report on investigation of the mechanical properties of paper electronics (printed and made out of paper). One key objective of such paper electronics is to achieve ultraflexibility. Therefore, it is important to understand electrical functionality and reliability of paper electronics under various physical (mechanical) deformations. Here, we show the general mechanical properties of the cellulose paper used and its electrical behavior under applied strain, tackling the main effects that need to be identified when building paper-based systems, from product performance and stability perspective. An overview of the stress-strain behavior of silver ink on paper is discussed, and then, we tackle a more specific analysis of the performance variations of paper sensors made with recyclable household materials when exposed to various mechanical conditions of tensile and compressive bending. This paper is important for developing stable wearable sensors for incorporation into Internet of Everything applications.

The Virtual Product-Process Design Laboratory for Structured Chemical Product Design and Analysis

DEFF Research Database (Denmark)

Mattei, Michele; Yunus, Nor Alafiza Binti; Kalakul, Sawitree

2014-01-01

The objective of this paper is to present new methods for design of chemicals based formulated products and their implementation in the software, the Virtual Product-Process Design Laboratory. The new products are tailor-made blended liquid products and emulsion-based products. The new software...

The value of museum communication: the cases of the Paper and Watermark Museum in Fabriano and the Ascoli Piceno Papal Paper Mill Museum in Ascoli Piceno

Directory of Open Access Journals (Sweden)

Patrizia Dragoni

2017-12-01

Full Text Available Guaranteeing the survival of cultural heritage, increasing its accessibility, both physical and intellectual, and the creation of countless benefits for different categories of stakeholders depends both on a perfect comprehension of the interests and abilities of users to take advantage of what is offered and, above all, on identifying and analysing the various types of value that can be attributed to it. According to Montella, there are three types of value that may be analysed for this purpose: a presentation value, informative in nature and inherent in the historical, cultural and possibly artistic value implicit in the heritage; a landscape value, extended to the context, inherent in the factual information services aimed at supporting policies of preventive and programmed conservation: and a production value, commercial in nature, which concerns the external effects generated by cultural heritage management to qualify the products and the images themselves of the businesses in order to make them stand out from the competition. The aim of this article is to inquire into whether, in what way and to what extent the communication of the Paper and Watermark Museum in Fabriano and the Ascoli Piceno Papal Paper Mill Museum in Ascoli Piceno creates presentation value and therefore leads the public to understand how far paper production has influenced the economic and socio-cultural history of the area in which they are located

Elemental mobility in sulfidic mine tailings reclaimed with paper mill by-products as sealing materials.

Science.gov (United States)

Jia, Yu; Stahre, Nanna; Mäkitalo, Maria; Maurice, Christian; Öhlander, Björn

2017-09-01

Sealing layers made of two alkaline paper mill by-products, fly ash and green liquor dregs, were placed on top of 50-year-old sulfide-containing tailings as a full-scale remediation approach. The performance and effectiveness of the sealing layers with high water content for an oxygen barrier and low hydraulic conductivity for a sealing layer in preventing the formation of acid rock drainage were evaluated 5 years after the remediation. The leaching behavior of the covered tailings was studied using batch leaching tests (L/S ratio 10 L/kg). The leaching results revealed that, in general, the dregs- and ash-covered tailings released relatively lower concentrations of many elements contained in acid rock drainage compared to those from the uncovered tailings. A change in the chemical composition and mineralogical state of the tailings was observed for the tailings beneath the covers. The increase in pH caused by the alkaline materials promoted metal precipitation. Geochemical modeling using PHREEQC confirmed most of the geochemical changes of the covered tailings. Both the ash and dregs showed potential to function as sealing materials in terms of their geochemical properties. However, mobilization of Zn and Ni from the lower part of the dregs-covered tailings was observed. The same phenomenon was observed for the lower part of the ash-covered tailings. Ash showed advantages over dregs as a cover material; based on geochemical studies, the ash immobilized more elements than the dregs did. Lysimeters were installed below the sealing layers, and infiltrating water chemistry and hydrology were studied to monitor the amount and quality of the leachate percolating through.

The Use of Alternate Ligno-cellulosic Raw Materials Banana (Musa sapientum) Ankara (Calotropis procera ) and Pineapple (Ananas comosus ) in Handmade Paper & their Blending with Waste Paper.

OpenAIRE

Atul Kumar

2013-01-01

The studies were made to established suitability of lingo-cellulosic raw materials namely leaf fibreBanana (Musa Sapientum), bast fibre Ankara (Calotropis Procera), & leaf fibre Pineapple (Ananas Comosus) for making pulps for handmade paper industry. This should help in providing a cost effective, good quality cellulosic raw material as an alternate to cost prohibitive traditionally used cotton hosiery waste traditionally used for manufacturing good quality handmade paper & it’s products. Th...

Allergic contact dermatitis from a paper mill slimicide containing 2-bromo-4'-hydroxyacetophenone

DEFF Research Database (Denmark)

Jensen, Charlotte D; Andersen, Klaus E

2003-01-01

Slimicides are biocidal products used in paper mills to inhibit the proliferation of slime-forming microorganisms that would otherwise spoil the paper products. A laboratory technician working at a paper mill had recurring dermatitis related to contact with the slimicide Busan 1130. We report...... the first case of allergic contact dermatitis from the slimicide Busan 1130. Diagnostic patch testing was performed with solutions of Busan 1130 and its active ingredient, 2-bromo-4'-hydroxyacetophenone (BHAP). Twenty-five controls were also tested. The patient showed a ++ reaction to 0.1% Busan 1130...... aqueous solution and 0.01% BHAP in ethanol. All controls were negative. The patient had recurrent allergic contact dermatitis from exposure to BHAP contained in the slimicide Busan 1130....

Allergic contact dermatitis from a paper mill slimicide containing 2-bromo-4'-hydroxyacetophenone.

Science.gov (United States)

Jensen, Charlotte D; Andersen, Klaus E

2003-03-01

Slimicides are biocidal products used in paper mills to inhibit the proliferation of slime-forming microorganisms that would otherwise spoil the paper products. A laboratory technician working at a paper mill had recurring dermatitis related to contact with the slimicide Busan 1130. We report the first case of allergic contact dermatitis from the slimicide Busan 1130. Diagnostic patch testing was performed with solutions of Busan 1130 and its active ingredient, 2-bromo-4'-hydroxyacetophenone (BHAP). Twenty-five controls were also tested. The patient showed a ++ reaction to 0.1% Busan 1130 aqueous solution and 0.01% BHAP in ethanol. All controls were negative. The patient had recurrent allergic contact dermatitis from exposure to BHAP contained in the slimicide Busan 1130.

Processes for the production of rare earths from monazite (Paper No. 36)

International Nuclear Information System (INIS)

Murthy, T.K.S.

1979-01-01

A few typical cases are briefly described to illustrate different methods available for rare earth concentration and separation from mixed rare earths chloride obtained for monazite. In the case of cerium, rare earths chloride mixture is treated with sodium sulphate to precipitate rare earths as double sulphates from which hydroxide cake is prepared. The cake is dried to oxidise cerium. Trivalent rare earths are selectively leached and the product is treated with HNO 3 . The resulting ceric nitrate solution is purified by liquid-liquid extraction using TBP. The scrubbed extract is reduced with H 2 O 2 and cerous nitrate is recovered by evaporation. Lanthanum is first concentrated by selective precipitation of hydroxides from rare earths chloride using air-ammonia mixture. The hydroxyde cake is dissolved in HNO 3 and NH 4 NO 3 to get the double nitrate which is subjected to counter current crystallisation for purification. Europium is present at a concentration of 0.01% in the rare earths chloride. It is concentrated in several steps by liquid-liquid extraction using di-2-ethyl hexyl phosphoric acid. The product is purified by selective reduction and europium is obtained as europium sulphate. In the same solvent extraction process samarium and gadolinium are also concentrated to about 25%. They are further upgraded to above 90% purity by repetion of liquid-liquid extraction technique. Cerium, lanthanum and europium obtained by the above processes analyse > 99% as oxides. (M.G.B.)

TO ANALYZE THE CONCEPT OF GREEN SUPPLY CHAIN MANAGEMENT IN PAPER INDUSTRY

OpenAIRE

Renil Rajan*1 & Rahul Charles Francis2

2017-01-01

Paper industry is primarily dependent upon forestbased raw materials. Growth of paper industry in India has been constrained due to high cost of production caused by inadequate availability and high cost of raw materials, power cost and concentration of mills in one particular area. Government has taken several policy measures to remove the bottlenecks of availability of raw materials and infrastructure development.This paper explores the outcome in terms of operational performance, of green ...

Factors affecting research productivity of production and operations management groups: An empirical study

OpenAIRE

George C. Hadjinicola; Andreas C. Soteriou

2006-01-01

This paper identifies factors that promote research productivity of production and operations management (POM) groups of researchers in US business schools. In this study, research productivity of a POM group is defined as the number of articles published per POM professor in a specific period of time. The paper also examines factors that affect research quality, as measured by the number of articles published per POM professor in journals, which have been recognized in the POM literature as ...

Effect of the activation of a clay-base paper industry by-product on cement matrix behaviour

Directory of Open Access Journals (Sweden)

García, R.

2008-12-01

Full Text Available The present study addresses variations in the calcination temperature (600-750 ºC and kiln time (two to five hours applied to activate coated paper waste and their effect on the rheological, physical and mechanical behaviour of cement matrices containing these active additions.The results obtained showed that the conditions under which kaolinite was activated had a direct effect on the subsequent behaviour of the calcined products. At activating temperatures of over 700 ºC, pozzolanic activity and mechanical strength were observed to be lower, setting time shorter and the mortar less workable.El presente trabajo de investigación aborda la influencia de las condiciones de activación (600-750 ºC y 2-5 horas de permanencia en el horno de los lodos de papel procedente de la fabricación de papel estucado en el comportamiento reológico, físico y mecánico de las matrices de cementos elaboradas con este tipo de adiciones activas.Los resultados obtenidos muestran una influencia directa entre las condiciones de activación de la caolinita y el comportamiento posterior de los productos calcinados. Así, en condiciones de activación superiores a 700 ºC se observa una menor actividad puzolánica, tiempo de fraguado más corto, disminución de la trabajabilidad de los morteros mezcla y resistencia mecánica más baja.

Mixed integer (0-1) fractional programming for decision support in paper production industry

NARCIS (Netherlands)

Claassen, G.D.H.

2014-01-01

This paper presents an effective and efficient method for solving a special class of mixed integer fractional programming (FP) problems. We take a classical reformulation approach for continuous FP as a starting point and extend it for solving a more general class of mixed integer (0–1) fractional

Global cycle changes the rules for U.S. pulp and paper

Science.gov (United States)

Peter J. Ince

1999-01-01

As in other industries, the fortunes of the U.S. pulp and paper industry are now closely tied to the global economy. The U.S. pulp and paper sector exhibits fairly steady production and growth trends, but its economic fortunes have become intertwined with the bglobal cyclec of supply and demand. Exposure to the global cycle has increased for the U.S. in recent decades...

Product derivation in software product families : a case study

NARCIS (Netherlands)

Deelstra, S; Sinnema, M; Bosch, J

2005-01-01

From our experience with several organizations that employ software product families, we have learned that, contrary to popular belief, deriving individual products from shared software assets is a time-consuming and expensive activity. In this paper we therefore present a study that investigated

Making Product Customization Profitable

DEFF Research Database (Denmark)

Mortensen, Niels Henrik; Hvam, Lars; Haug, Anders

2010-01-01

The main result presented in this paper is the Framework for Product Family Master Plan. This framework supports the identification of a product architecture for companies that customize products and services. The framework has five coherent aspects, the market, product assortment, supply...

Speciation and solubility of neptunium in underground environments by paper electrophoresis

International Nuclear Information System (INIS)

Nagasaki, S.; Tanaka, Satoru; Takahashi, Yoichi

1988-01-01

Speciation and solubility of neptunium were studied using paper electrophoresis, ion exchange and ultrafiltration. Among these methods, the paper electrophoresis was found to be suitable for measuring speciation and solubility of neptunium of low concentration, if chemical species had opposite charge to each other or dissolved species had a charge. Using paper electrophoresis, hydrolysis constants of NpO 2 OH 0 and NpO 2 - (OH) 2 - and solubility product of NpO 2 were obtained and ionic-strength dependence of speciation was observed. (author) 9 refs.; 3 figs.; 2 tabs

Use of an expert system for energy cost calculations in the pulp and paper industry

International Nuclear Information System (INIS)

Viinikainen, S.; Malinen, H.

1991-12-01

In this paper, an application for the calculation of energy prices and product energy costs in the pulp and paper industry by using the Xi Plus expert system is presented. The use of expert systems in the energy field and also the Xi Plus expert system and its general features are also discussed. The application has been made after collecting data from several sources. It runs in an IBM AT compatible microcomputer therefore being easily used in mills. The name of the application is PRODUCT ENERGY COST. It has a three level structure: the mill level, the department level and the main equipment level. Currently, the mill level and, in the energy production area, the department level (power plant) and the equipment level (boilers, turbines) are used. The application consists of four knowledge base groups. Altogether there are 52 separate knowledge bases having 534 rules or demons. The knowledge base groups are: BASIC DATA, ENERGY USE, ENERGY PRODUCTION and ENERGY COSTS. The application can be used for various heat and electrical energy price calculations or for energy cost calculations for different pulp and paper products. In this study, the energy prices for kraft pulp, TMP, newsprint and fine paper in different operating conditions and the associated energy costs of the products are calculated. Also, in some cases a sensitivity analysis is done. The expert system is quite suitable for this type of calculation and the method could be further developed for specific industrial needs, e.g. to enhance the energy management systems

Historical context and workers lifestyle in Mexico: San Rafael paper mill (1894-1940

Directory of Open Access Journals (Sweden)

José Gustavo Becerril Montero

2014-12-01

Full Text Available This article aims to describe the main features of the constructions made by the factories, mainly in the center and around the city of Mexico, since the late nineteenth century to the twentieth. The factories of Mexico in the nineteenth century were characterized by various constructive and technological elements that were giving them a unique profile within the productive landscape of the country. To observe the process of construction, mainly of spaces for the workers, the case of one of the most important factories attached role in Mexico, paper and addressed San Rafael. The San Rafael Company, established in the state of Mexico in the late nineteenth century, pursued since its founding supply the paper market. To achieve this goal, he implemented an ambitious production system, I need to build large apartments for the production of paper, and at the same time to concentrate spaces and ensure their workforce. So, in a few years he managed to develop an advanced, for the time, labor and industrial complex, giving their workers from living rooms to recreation and leisure spaces.

Effects of gamma radiation (60Co) on the main physical and chemical properties of health care packaging and their compounds paper and multilayer plastic film, used for health products sterilization

International Nuclear Information System (INIS)

Porto, Karina Meschini Batista Geribello

2013-01-01

Gamma radiation is one of the technologies applied for the sterilization of packaging systems containing products for health. During sterilization process it is critical that the properties of packages are maintained. In this study two samples of commercial pouch packaging comprised of surgical grade paper on one side and the other side multilayer plastic film were irradiated with gamma rays. The following doses were applied 25 kGy (1,57 kGy/h) and 50 kGy (1,48 kGy/h). One packaging sample was paper formed by softwood fibers and multilayer plastic film based on poly(ethylene terephthalate) (PET)/polyethylene (PE). The second type of paper sample was made by a mixture of softwood and hardwood fibers and multilayer plastic film based on polyethylene terephthalate (ethylene) (PET)/polypropylene (PP). The effects of radiation on the physical and chemical properties of papers and multilayer plastic films, as well as the properties of the package were studied. The paper was the more radiation sensitive among the studied materials and radiation effects were more pronounced at brightness, pH, tearing resistance, bursting strength and tensile strength. Nonetheless, worst comparatively effects were noted on the sample made by a mixture of softwood and hardwood fibers. The porosity of paper was enhanced by 50 kGy. In the case of plastic films, radiation effects on tensile strength was the most pronounced property for both samples. In the case of the packaging the sealing resistance decreased with radiation. The effects observed for the treatment at 50 kGy were more pronounced when compared to 25 kGy. This last is the dose which is usually applied to sterilize health products. A dosimetry study was performed during irradiation at 25 kGy, 40 kGy and 50 kGy and its importance may be reported by the average dose variation 20 %. (author)

Asian-Pacific Papers. Occasional Papers Number 10.

Science.gov (United States)

McCarthy, Brian, Ed.

Sixteen papers are presented. Topics covered include language teaching, discourse analysis, code switching, phonetics, language and cultural identity, and descriptive and comparative studies. All presenters were from the Asia-Pacific area of the world. Papers include: "The Baba Malay Lexicon: Hokkien Loanwords in Baba Malay" (Anne…

An economic route to mass production of graphene oxide solution for preparing graphene oxide papers

Energy Technology Data Exchange (ETDEWEB)

Liou, Yan-Jia; Tsai, Bo-Da; Huang, Wu-Jang, E-mail: wjhuang@mail.npust.edu.tw

2015-03-15

Highlights: • Graphene oxide paper can be prepared from synthesized graphene sheet containing carbon materials. • Graphene oxide paper can be used as a phase change materials for thermal storage. • To prepare graphene oxide paper from synthesized graphene sheet containing carbon materials could highly reduce the cost. - Abstract: Graphene oxide paper (GOP) is a composite material fabricated from graphene oxide (GO) solution. In addition, it can be a novel and potential material for application on the separation of water vapor from gaseous steam or larger alkali ions from aqueous solution. GOP could be used as electricity and thermal storage materials. The preparation of GO commonly uses high purity natural or artificial graphite. It is difficult to prepare GOP from artificial graphite powder due to the cost of $1,450 US/ton. In this study, we tried to prepare GOPs from homemade graphene sheets containing carbon materials (GSCCMs) and evaluate the thermal properties of GSCCM derived GOPs. Results show that GSCCM derived GOPs have a higher phase transition temperature, and the average mesophase phase change enthalpy is 9.41 J/g, which is 2.87 times higher than graphite derived GOP. Therefore, to prepare GOP from GSCCMs could highly reduce the cost.

Production monitoring system for understanding product robustness

DEFF Research Database (Denmark)

Boorla, Srinivasa Murthy; Howard, Thomas J.

2016-01-01

study is used to demonstrate how the monitoring system can be used to efficiently guide corrective action to improve product performance. It is claimed that the monitoring system can be used to dramatically cut the time taken to identify, planand execute corrective action related to typical quality......In the current quality paradigm, the performance of a product is kept within specification by ensuring that its parts are within specification. Product performance is then validated after final assembly. However, this does not control how robust the product performance is, i.e. how much...... it will vary between the specification limits. In this paper, a model for predicting product performance is proposed, taking into account design, assembly and process parameters live from production. This empowers production to maintain final product performance, instead of part quality. The PRECI‐IN case...

Optimal energy management in pulp and paper mills

International Nuclear Information System (INIS)

Sarimveis, H.K.; Angelou, A.S.; Retsina, T.R.; Rutherford, S.R.; Bafas, G.V.

2003-01-01

In this paper, we examine the utilization of mathematical programming tools for optimum energy management of the power plant in pulp and paper mills. The objective is the fulfillment of the total plant requirements in energy and steam with the minimum possible cost. The proposed methodology is based on the development of a detailed model of the power plant using mass and energy balances and a mathematical formulation of the electrical purchase contract, which can be translated into a rigorous mixed integer linear programming optimization problem. The results show that the method can be a very useful tool for the reduction of production cost due to minimization of the fuel and electricity costs

Petroleum product scarcity: a review of the supply and distribution of petroleum products in Nigeria

International Nuclear Information System (INIS)

Akpoghomeh, Osi S.; Badejo, Dele

2006-01-01

Nigeria ranks high among the comity of oil producers both at the world level and among the OPEC eleven. It is, therefore, paradoxical that the supply of all petroleum products is erratic and has declined sharply in the recent past. This paper thus reviews the petroleum product supply and distribution systems in the country to ascertain the extent to which the system may have contributed to the present product scarcity in Nigeria and, by extension, identify the causes of the present regime of petroleum product scarcity. The paper observes that the network density and connectivity of petroleum product distribution pipelines are low and both indicators consequently show the inadequacy/deficiency of the network in ensuring an efficient distribution system. The supply mode, on the other hand, has, over the years, demonstrated its inability to guarantee adequate supply due to factors including sabotage, vandalism, banditry and poorly maintained infrastructure. Further, the federal government and the major and independent marketers could not sustain the importation of petroleum products because of the shortfall between the landed cost of imported products and their selling prices in Nigeria, which made the business unprofitable. Finally, the paper examines the withdrawal by the federal government of subsidies on the price of petroleum products consumed locally. All the above factors together occasioned increases in the cost of products. In conclusion, this paper supports the call for the privatization of refineries and the depot/pipeline system as a viable option to end the supply problems. (Author)

The water footprint of wood for lumber, pulp, paper, fuel and firewood

Science.gov (United States)

Schyns, Joep F.; Booij, Martijn J.; Hoekstra, Arjen Y.

2017-09-01

This paper presents the first estimate of global water use in the forestry sector related to roundwood production for lumber, pulp, paper, fuel and firewood. For the period 1961-2010, we estimate forest evaporation at a high spatial resolution level and attribute total water consumption to various forest products, including ecosystem services. Global water consumption for roundwood production increased by 25% over 50 years to 961 × 109 m3/y (96% green; 4% blue) in 2001-2010. The water footprint per m3 of wood is significantly smaller in (sub)tropical forests compared to temperate/boreal forests, because (sub)tropical forests host relatively more value next to wood production in the form of other ecosystem services. In terms of economic water productivity and energy yield from bio-ethanol per unit of water, roundwood is rather comparable with major food, feed and energy crops. Recycling of wood products could effectively reduce the water footprint of the forestry sector, thereby leaving more water available for the generation of other ecosystem services. Intensification of wood production can only reduce the water footprint per unit of wood if the additional wood value per ha outweighs the loss of value of other ecosystem services, which is often not the case in (sub)tropical forests. The results of this study contribute to a more complete picture of the human appropriation of water, thus feeding the debate on water for food or feed versus energy and wood.

Mineral oil barrier sequential polymer treatment for recycled paper products in food packaging

Science.gov (United States)

Paul, Uttam C.; Fragouli, Despina; Bayer, Ilker S.; Mele, Elisa; Conchione, Chiara; Cingolani, Roberto; Moret, Sabrina; Athanassiou, Athanassia

2017-01-01

Recycled cellulosic paperboards may include mineral oils after the recycle process, which together with their poor water resistance limit their use as food packaging materials. In this work, we demonstrate that a proper functionalization of the recycled paper with two successive polymer treatments, imposes a mineral oil migration barrier and simultaneously renders it waterproof and grease resistant, making it an ideal material for food contact. The first poly (methyl methacrylate) treatment penetrates the paper network and creates a protective layer around every fiber, permitting thus the transformation of the paperboard to a hydrophobic material throughout its thickness, reducing at the same time the mineral oil migration. Subsequently, the second layer with a cyclic olefin copolymer fills the open pores of the surface, and reduces the mineral oil hydrocarbons migration at levels below those proposed by the BMEL. Online liquid chromatography-gas chromatography coupled with flame ionization detection quantitatively demonstrate that this dual functional treatment prevents the migration of both saturated (mineral oil saturated hydrocarbons) and aromatic hydrocarbon (mineral oil aromatic hydrocarbons) mineral oils from the recycled paperboard to a dry food simulant.

Cellulose nanofibers use in coated paper

Science.gov (United States)

Richmond, Finley

Cellulose Nanofibers (CNF) are materials that can be obtained by the mechanical breakdown of natural fibers. CNF have the potential to be produced at low cost in a paper mill and may provide novel properties to paper, paper coatings, paints, or other products. However, suspensions have a complex rheology even at low solid contents. To be able to coat, pump, or mix CNF at moderate solids, it is critical to understand the rheology of these suspensions and how they flow in process equipment; current papers only report the rheology up to 6% solids. Few publications are available that describe the coating of CNF onto paper or the use of CNF as an additive into a paper coating. The rheology of CNF suspensions and coatings that contain CNF were characterized with parallel-disk geometry in a controlled stress rheometer. The steady shear viscosity, the complex viscosity, the storage modulus, and the yield stress were determined for the range of solids or concentrations (2.5-10.5%). CNF were coated onto paper with a laboratory rod coater, a size press and a high speed cylindrical laboratory coater (CLC). For each case, the coat weights were measures and the properties of the papers were characterized. CNF water base suspension was found to be a shear thinning with a power law index of around 0.1. Oscillatory tests showed a linear viscoelastic region at low strains and significant storage and loss moduli even at low solids. The Cox Merz rule does not hold for CNF suspensions or coating formulations that contain CNF with complex viscosities that are about 100 times larger than the steady shear viscosities. Paper coating formulations that contain CNF were found to have viscosities and storage and loss moduli that are over ten times larger than coatings that contain starch at similar solids. CNF suspensions were coated on papers with low amount transferred on paper either at high solids or high nip loadings. The amount transferred appears to be controlled by an interaction of

Framework for developing product strategy for Configure-To-Order products

DEFF Research Database (Denmark)

Myrodia, Anna; Hvam, Lars

2014-01-01

Companies producing customized products tend to increase the variety of their product portfolio, in order to fulfill the demand of their customers and align with the competitors. Nevertheless the profitability of the product families may vary greatly. The purpose of this paper is to analyze...... profitability of Configure-To-Order (CTO) products. The framework consists of a 4-step model: Analysis of product assortment, Profitability analysis on configured products, Market and Competitors analysis, Scenarios for future product assortment. The suggested framework is tested on a company. The results...... in terms of product delimitation and experiences gained from the case study are further discussed....

Detailed Life Cycle Assessment of Bounty Paper Towel ...

Science.gov (United States)

Life Cycle Assessment (LCA) is a well-established and informative method of understanding the environmental impacts of consumer products across the entire value chain. However, companies committed to sustainability are interested in more methods that examine their products and activities' impacts. Methods that build on LCA strengths and illuminate other connected but less understood facets, related to social and economic impacts, would provide greater value to decision-makers. This study is a LCA that calculates the potential impacts associated with Bounty® paper towels from two facilities with different production lines, an older one (Albany, Georgia) representing established technology and the other (Box Elder, Utah), a newer state-of-the-art platform. This is unique in that it includes use of Industrial Process Systems Assessment (IPSA), new electricity and pulp data, modeled in open source software, and is the basis for the development of new integrated sustainability metrics (published separately). The new metrics can guide supply chain and manufacturing enhancements, and product design related to environmental protection and resource sustainability. Results of the LCA indicate Box Elder had improvements on environmental impact scores related to air emission indicators, except for particulate matter. Albany had lower water use impacts. After normalization of the results, fossil fuel depletion is the most critical environmental indicator. Pulp production, e

Production and Productivity Effects of Informal Contract Farming in ...

African Journals Online (AJOL)

This paper uses data from a 2001 household survey of small-scale farming households in Kirinyaga District, Kenya to explore production effects of informal credit contracts in French bean farming where formal markets for surplus production are seemingly shallow and imperfect. Specifically, it examines whether informal ...

MINT R and D 2006 Seminar: compilation of papers

International Nuclear Information System (INIS)

2006-09-01

The papers presented in this seminar discussed the following areas: techniques, processes, characterization, infrastructures and products development, technology development, instrumentation, research and development management in MINT - Malaysian Institute for Nuclear Technology Research. It covered the following subjects: environment, agriculture and biotechnology, advanced materials, nanotechnology; reactor application, safety, medicine and biotechnology, alternative energy, and ICT

Review on microfluidic paper-based analytical devices towards commercialisation.

Science.gov (United States)

Akyazi, Tugce; Basabe-Desmonts, Lourdes; Benito-Lopez, Fernando

2018-02-25

Paper-based analytical devices introduce an innovative platform technology for fluid handling and analysis, with wide range of applications, promoting low cost, ease of fabrication/operation and equipment independence. This review gives a general overview on the fabrication techniques reported to date, revealing and discussing their weak points as well as the newest approaches in order to overtake current mass production limitations and therefore commercialisation. Moreover, this review aims especially to highlight novel technologies appearing in literature for the effective handling and controlling of fluids. The lack of flow control is the main problem of paper-based analytical devices, which generates obstacles for marketing and slows down the transition of paper devices from the laboratory into the consumers' hands. Copyright © 2017 Elsevier B.V. All rights reserved.

PAPER AND PAPERBOARD INDUSTRY IN EUROPEAN UNION PROCESS

Directory of Open Access Journals (Sweden)

Kadri Cemil Akyüz

2006-11-01

Full Text Available Turkey should benefit from its own resources by realizing their value in the period that it turned its face to Europe. Therefore, the economical potential of the country should be analyzed thoroughly. Knowing its own strength and taking the necessary steps to this effect in order to take the fullest advantage of the strength are of vital importance for the countries in attaining the development level. Within the existing potential, the necessary importance and support should be given to small and medium enterprises that are forming the most effective part of the economic life and to the forest products industry which has a significant position among these enterprises. In this study, certain product groups belonging to paper and paperboard industry situated in forest products industry were discussed what situation they are in Turkey and European Union countries and competition position. In this context, hierarchical cluster analysis and discriminant analysis being of multidimensional statistical methods were used.

Lignocellulosic micro/nanofibers from wood sawdust applied to recycled fibers for the production of paper bags.

Science.gov (United States)

Tarrés, Quim; Pellicer, Neus; Balea, Ana; Merayo, Noemi; Negro, Carlos; Blanco, Angeles; Delgado-Aguilar, Marc; Mutjé, Pere

2017-12-01

In the present work, lignocellulosic micro/nanofibers (LCMNF) were produced from pine sawdust. For that, pine sawdust was submitted to alkali treatment and subsequent bleaching stages, tailoring its chemical composition with the purpose of obtaining effective LCMNF. The obtained LCMNF were characterized and incorporated to recycled cardboard boxes with the purpose of producing recycled paper. The obtained results showed that it was possible to obtain LCMNF with the same reinforcing potential than those cellulose nanofibers (CNF) prepared by oxidative or other chemical methods In fact, the obtained papers increased the breaking length of recycled cardboard from 3338m to 5347m, being a value significantly higher than the requirements to produce paper bags. Overall, the studied strategies could allow a significant reduction of paper basis weight, with the consequent material saving and, thus, contribution to the environment. Copyright © 2017 Elsevier B.V. All rights reserved.

Environmental study of a pulp and paper mill in NWFP, Pakistan

International Nuclear Information System (INIS)

Shah, J.; Jan, A.; Rahman, A.U.

2006-01-01

A detailed environmental study of a pulp and paper mill was carried out, which included effluent flow measurements and sample collection from some selected points. Stack gas analysis was carried out on the sport. The quantity of raw materials used and their wastage in the production processes were identified. The data obtained were fed into environmental balance sheets, already developed for the mill, which showed excessive use of water per ton production of paper, as compared to a European paper mill the biological oxygen demand, chemical oxygen demand, and total soluble solids were above the permissible level of National Environmental Quality Standards specified by the Government of Pakistan. Control measures for preventing raw materials wastage, both at in-plant and end-of-pipe treatment, were recommended, which included water conservation, spill control, recovery of valuable fibre, reduction in chlorinated compounds, waste heat recovery, solid waste recovery and its safe disposal for the in-plant controls, while options for the end-of-pipe treatment were discussed with the factory management. (author)

A simple approximation of productivity scores of fuzzy production plans

DEFF Research Database (Denmark)

Hougaard, Jens Leth

2005-01-01

This paper suggests a simple approximation procedure for the assessment of productivity scores with respect to fuzzy production plans. The procedure has a clear economic interpretation and all the necessary calculations can be performed in a spreadsheet making it highly operational...

Fickle product mix: Exporters adapting their product vectors across markets

OpenAIRE

Fontagné, Lionel; Secchi, Angelo; Tomasi, Chiara

2014-01-01

This paper analyzes how multi-product firms adjust their exported product-mix across desti- nations. Using cross sections of Italian and French data, we show that firms do not follow a rigid ordering in their product mix exported in different markets but rather they adapt their choices to better match with country characteristics. By using metrics based on export shares and on sequences of product names we provide new insights on the extent a firm's products portfolio changes across destinati...

Final Report: Laboratory Development of a High Capacity Gas-Fired Paper Dryer

Energy Technology Data Exchange (ETDEWEB)

Yaroslav Chudnovsky; Aleksandr Kozlov; Lester Sherrow

2005-09-30

Paper drying is the most energy-intensive and temperature-critical aspect of papermaking. It is estimated that about 67% of the total energy required in papermaking is used to dry paper. The conventional drying method uses a series of steam-heated metal cylinders that are required to meet ASME codes for pressure vessels, which limits the steam pressure to about 160 psig. Consequently, the shell temperature and the drying capacity are also limited. Gas Technology Institute together with Boise Paper Solutions, Groupe Laperrier and Verreault (GL&V) USA Inc., Flynn Burner Corporation and with funding support from the U.S. Department of Energy, U.S. natural gas industry, and Gas Research Institute is developing a high efficiency gas-fired paper dryer based on a combination of a ribbon burner and advanced heat transfer enhancement technique. The Gas-Fired Paper Dryer (GFPD) is a high-efficiency alternative to conventional steam-heated drying drums that typically operate at surface temperatures in the 300 deg F range. The new approach was evaluated in laboratory and pilot-scale testing at the Western Michigan University Paper Pilot Plant. Drum surface temperatures of more than 400 deg F were reached with linerboard (basis weight 126 lb/3000 ft2) production and resulted in a 4-5 times increase in drying rate over a conventional steam-heated drying drum. Successful GFPD development and commercialization will provide large energy savings to the paper industry and increase paper production rates from dryer-limited (space- or steam-limited) paper machines by an estimated 10 to 20%, resulting in significant capital costs savings for both retrofits and new capacity.

Food production and service in UK hospitals.

Science.gov (United States)

Ahmed, Mohamed; Jones, Eleri; Redmond, Elizabeth; Hewedi, Mahmoud; Wingert, Andreas; Gad El Rab, Mohamed

2015-01-01

The purpose of this paper is to apply value stream mapping holistically to hospital food production/service systems focused on high-quality food. Multiple embedded case study of three (two private-sector and one public-sector) hospitals in the UK. The results indicated various issues affecting hospital food production including: the menu and nutritional considerations; food procurement; food production; foodservice; patient perceptions/expectations. Value stream mapping is a new approach for food production systems in UK hospitals whether private or public hospitals. The paper identifies opportunities for enhancing hospital food production systems. The paper provides a theoretical basis for process enhancement of hospital food production and the provision of high-quality hospital food.

Optical coherence tomography as an accurate inspection and quality evaluation technique in paper industry

Science.gov (United States)

Prykäri, Tuukka; Czajkowski, Jakub; Alarousu, Erkki; Myllylä, Risto

2010-05-01

Optical coherence tomography (OCT), a technique for the noninvasive imaging of turbid media, based on low-coherence interferometry, was originally developed for the imaging of biological tissues. Since the development of the technique, most of its applications have been related to the area of biomedicine. However, from early stages, the vertical resolution of the technique has already been improved to a submicron scale. This enables new possibilities and applications. This article presents the possible applications of OCT in paper industry, where submicron or at least a resolution close to one micron is required. This requirement comes from the layered structure of paper products, where layer thickness may vary from single microns to tens of micrometers. This is especially similar to the case with high-quality paper products, where several different coating layers are used to obtain a smooth surface structure and a high gloss. In this study, we demonstrate that optical coherence tomography can be used to measure and evaluate the quality of the coating layer of a premium glossy photopaper. In addition, we show that for some paper products, it is possible to measure across the entire thickness range of a paper sheet. Furthermore, we suggest that in addition to topography and tomography images of objects, it is possible to obtain information similar to gloss by tracking the magnitude of individual interference signals in optical coherence tomography.

Powder metallurgical high performance materials. Proceedings. Volume 4: late papers

Energy Technology Data Exchange (ETDEWEB)

Kneringer, G; Roedhammer, P; Wildner, H [eds.

2001-07-01

This is the fourth volume (late papers) of the 15th International Plansee seminar 2001 which general theme was 'Powder metallurgical high performance materials'. The seminar looked beyond the refractory metals and cemented carbides, which remain as its focus, to novel classes of materials, such as intermetallic compounds, with potential for high temperature applications. This volume 4 contains papers dealing with high performance P/M metals (ITER and fusion reactors, solid targets, materials microstructure, novel alloys, etc.), P/M hard materials ( production and characterization, tungsten carbides, titanium carbides, microstructural design, coatings composition and performance, etc.) and general topics. From 37 papers 24 correspond to INIS subject scope and they were indexed separately. (nevyjel)

Powder metallurgical high performance materials. Proceedings. Volume 4: late papers

International Nuclear Information System (INIS)

Kneringer, G.; Roedhammer, P.; Wildner, H.

2001-01-01

This is the fourth volume (late papers) of the 15th International Plansee seminar 2001 which general theme was 'Powder metallurgical high performance materials'. The seminar looked beyond the refractory metals and cemented carbides, which remain as its focus, to novel classes of materials, such as intermetallic compounds, with potential for high temperature applications. This volume 4 contains papers dealing with high performance P/M metals (ITER and fusion reactors, solid targets, materials microstructure, novel alloys, etc.), P/M hard materials ( production and characterization, tungsten carbides, titanium carbides, microstructural design, coatings composition and performance, etc.) and general topics. From 37 papers 24 correspond to INIS subject scope and they were indexed separately. (nevyjel)

Economic production quantity models for imperfect product and service with rework

OpenAIRE

Tai, Allen H.

2012-01-01

When imperfect quality products are produced in a production process, rework may be performed to make them become serviceable. In an inventory system, items may deteriorate. Selling deteriorated items to customers will create negative impact on corporate image. In this paper, two economic production quantity (EPQ) models are proposed for deteriorating items with rework process. A single production-rework plant system and a system consists of $n$ production plants and one rework plant are cons...

Development of Production Control in Small Batch Production

Directory of Open Access Journals (Sweden)

Németh Péter

2016-01-01

Full Text Available Our aim with this paper is to develop a new performance measurement and control system for small batch production in the automotive industry. For this reason, we present our previous research results for warehouse performance measurement and adopt its methodology to production control. The proposed method is based on artificial intelligence (neural networks.

Product, Organizational and Performance Effects of Product Modularity

DEFF Research Database (Denmark)

Boer, Henrike Engele Elisabeth

2014-01-01

beyond these industries. To be able to establish whether firms not part of these industries would experience the same performance effects, survey research will be needed. To support future survey research, this paper proposes an operationalization of product modularity and details the link between...... product modularity and firm performance, to support the future development of measures and hypotheses....

Evaluating Consumer Product Life Cycle Sustainability with Integrated Metrics: A Paper Towel Case Study

Science.gov (United States)

Integrated sustainability metrics provide an enriched set of information to inform decision-making. However, such approaches are rarely used to assess product supply chains. In this work, four integrated metrics—presented in terms of land, resources, value added, and stability—ar...

Cellulose Nanocrystals Obtained from Cynara Cardunculus and Their Application in the Paper Industry

Directory of Open Access Journals (Sweden)

Valentina Coccia

2014-08-01

Full Text Available Biorefinery aims at designing new virtuous and high-efficiency energy chains, achieving the combined production of biofuels (e.g., bioethanol and biobased products. This emerging philosophy can represent an important opportunity for the industrial world, exploiting a new kind of nano-smart biomaterials in their production chains. This paper will present the lab experience carried out by the Biomass Research Centre (CRB in extracting cellulose nanocrystals (NCC from a pretreated (via Steam Explosion fraction of Cynara cardunculus. This is a very common and invasive arboreal variety in central Italy. The NCC extraction methodology allows the separation of the crystalline content of cellulose. Such a procedure has been considered in the literature with the exception of one step in which the conditions have been optimized by CRB Lab. This procedure has been applied for the production of NCC from both Cynara cardunculus and microcrystalline cellulose (MCC. The paper will discuss some of the results achieved using the obtained nanocrystals as reinforcing filler in a paper sheet; it was found that the tensile strength increased from 3.69 kg/15 mm to 3.98 kg/15 mm, the durability behavior (measured by bending number changed from the value 95 to the value 141, and the barrier properties (measured by Gurley porosity were improved, increasing from 38 s to 45 s.

Evaluation of full-strength paper mill effluent for electricity generation ...

African Journals Online (AJOL)

In the search for renewable, sustainable and affordable energy sources, microbial fuel cells (MFCs) offer the advantage of a biological oxidation of pollutants to the direct generation of electricity by microorganisms. We thus examined the biodegradability and suitability of unamended paper mill effluent for power production ...

Obtaining of Peracetic Cellulose from Oat Straw for Paper Manufacturing

Directory of Open Access Journals (Sweden)

Tetyana V. Zelenchuk

2017-10-01

Full Text Available Background. Development of technology for obtaining peracetic pulp from oat straw and its use in the production of one of the paper mass types. Objective. Determination of peracetic cooking technological parameters’ optimal values for oat straw peracetic cellulose quality indicators. Methods. The oat straw cooking was carried out with peracetic acid at 95 ± 1 °C from 90 to 180 min for hydromodulus 8:1 and 7:1, using a sodium tungstate catalyst. To determine the oat straw peracetic cellulose mechanical indexes, laboratory samples of paper weighing 70 g/m2 were made. Results. Technological parameters’ optimum values (temperature, cooking duration, hydromodulus, hydrogen peroxide and acetic acid concentration for the oat straw delignification process were established. It is shown that the sodium tungstate catalyst addition to the cooking solution at a rate of up to 1 % of the plant raw material weight helps to reduce the lignin content in cellulose to 15 %. A diagram of the cellulose yield dependence on its residual lignin content for various methods of non-wood plant material species delignification is constructed. The high efficiency of the peracetic method for obtaining cellulose from non-wood plant raw materials, in particular from oat straw, has been confirmed. It is determined that the obtained peracetic cellulose from oat straw has high mechanical indexes. Conclusions. Oat straw peracetic cellulose can be used for the production of paper and cardboard mass types, in particular wrapping paper.

浅议石头纸的特性、生产现状及发展前景%Shallow debate the character, production status development prospects on stone-paper

Institute of Scientific and Technical Information of China (English)

阳铁建; 颜鑫

2012-01-01

介绍了石头纸所具有的良好的物理性能、安全性能和印刷书写特性以及石头纸在文化用纸、工业用纸、包装用纸、资讯用纸及特殊用纸五大类纸制品方面具有良好的适用范围，同时阐明了与传统的植物纤维纸相比石头纸在节能减排方面具有的巨大优势，在可持续发展方面具有明显缺点和先天不足。石头纸项目目前“蓬勃发展”的现状也让人担忧这一新兴产品的发展前景。%This thesis introduced the stone-paper has good physical performance, and security performance, and printing writing character; The thesis introduced also the good applicable scope on the stone-paper in the cultural paper, and industry paper, and packing paper, and information paper, and special paper five kinds of paper products, and introduced huge advantage in energy conservation and emission reduction, and obvious shortcomings and inherent shortage in sustainable development of the stone-paper for comparing with the traditional plant fiber paper. Based on stone-paper project currently /"vigorous development/", the current situation of the future development of more worrying.

76 FR 34204 - Certain Lined Paper Products From the People's Republic of China; Notice of Preliminary Intent To...

Science.gov (United States)

2011-06-13

.... SUMMARY: The Department of Commerce (``the Department'') is conducting the fourth administrative review of... filler paper, graph paper, and laboratory notebooks, and with the smaller dimension of the paper measuring 6 inches to 15 inches (inclusive) and the larger dimension of the paper measuring 8\\3/4\\ inches to...

Production sharing agreements

International Nuclear Information System (INIS)

1994-01-01

This paper, which was presented at the Production Sharing Agreement seminar, discusses economic rent, negotiations, trends in fiscal system development, and concessionary systems. Production sharing contracts, risk service contracts, joint ventures and the global market are examined. (UK)

Can Differentiated Production Planning and Control enable both Responsiveness and Efficiency in Food Production?

Directory of Open Access Journals (Sweden)

Anita Romsdal

2014-07-01

Full Text Available This paper addresses the complex production planning and control (PPC challenges in food supply chains. The study illustrates how food producers' traditional make‐to‐stock (MTS approach is not well suited to meet the trends of increasing product variety, higher demand uncertainty, increasing sales of fresh food products and more demanding customers. The paper proposes a framework for differentiated PPC that combines MTS with make‐to‐order (MTO.The framework matches products with the most appropriate PPC approaches and buffering techniques depending on market and product characteristics. The core idea is to achieve more volume flexibility in the production system by exploiting favourable product and market characteristics (high demand predictability, long customer order leadtime allowances and low product perishability. A case study is used to demonstrate how the framework can enable food producers to achieve efficiency in production, inventory and PPC processes – and simultaneously be responsive to market requirements.

Activity and longevity of antibody in paper-based blood typing diagnostics

Science.gov (United States)

Henderson, Clare A.; McLiesh, Heather; Then, Whui L.; Garnier, Gil

2018-05-01

Paper-based diagnostics provide a low-cost, reliable and easy to use mode of blood typing. The shelf-life of such products, however, can be limited due to the reduced activity of reagent antibodies sorbed on the paper cellulose fibres. This study explores the effects of ageing on antibody activity for periods up to twelve months on paper and in solution under different ageing and drying conditions - air-dried, lyophilised and kept as a liquid. Paper kept wet with undiluted antibody is shown to have the longest shelf-life and the clearest negatives. Antibody diluted with bovine serum albumin (BSA) protects against the lyophilisation process, however, beyond nine months ageing, false positives are seen. Paper with air-dried antibodies is not suitable for use after one month ageing. These results inform preparation and storage conditions for the development of long shelf-life blood grouping paper-based diagnostics.

Activity and Longevity of Antibody in Paper-Based Blood Typing Diagnostics

Directory of Open Access Journals (Sweden)

Clare A. Henderson

2018-05-01

Full Text Available Paper-based diagnostics provide a low-cost, reliable and easy to use mode of blood typing. The shelf-life of such products, however, can be limited due to the reduced activity of reagent antibodies sorbed on the paper cellulose fibers. This study explores the effects of aging on antibody activity for periods up to 12 months on paper and in solution under different aging and drying conditions—air-dried, lyophilized, and kept as a liquid. Paper kept wet with undiluted antibody is shown to have the longest shelf-life and the clearest negatives. Antibody diluted with bovine serum albumin (BSA protects against the lyophilization process, however, beyond 9 months aging, false positives are seen. Paper with air-dried antibodies is not suitable for use after 1 month aging. These results inform preparation and storage conditions for the development of long shelf-life blood grouping paper-based diagnostics.

Characteristics and utilization of non-wood pulp and paper; Himokuzai pulp / kami no tokucho to sono riyo

Energy Technology Data Exchange (ETDEWEB)

Hara, H. [Mishima Paper Co. Ltd., Shizuoka (Japan)

1998-09-01

The reasons, difficulty in the usage, and the methods of use of non-wood papers are discussed. Non-wood papers sold in Japan are arranged basing on published data. The type of non-wood paper classified as special printing paper makes up the majority, and there are a variety of other products such as printing board, coated paper, thin paper, wrapping paper, functional paper, and watercolor paper. Kenaf and cotton are used in large quantities as non-wood plants for paper production, and use of bagasse and bamboo is increasing. Non-wood paper are used in consideration of environmental and resources problems and for utilizing the special features of non-wood fiber, and the characteristics of non-wood pulp and the effect of non-wood paper are discussed in this report. It is expected that papers utilizing the characteristics of non-wood paper will be developed. Non-wood papers are substitutions for various papers produced from wood pulp, and the fundamental point is the method of improving the original quality and paper quality by combining with non-wood pulp. 11 refs., 4 figs., 3 tabs.

Productivity and Performance Measurement

DEFF Research Database (Denmark)

Hald, Kim Sundtoft; Spring, Martin

This study explores conceptually how performance measurement as discussed in the literature, enables or constrains the ability to manage and improve productivity. It uses an inter-disciplinary literature review to identify five areas of concern relating productivity accounting to the ability...... to improve productivity: “Productivity representation”; “productivity incentives”, “productivity intervention”; “productivity trade-off or synergy” and “productivity strategy and context”. The paper discusses these areas of concern and expands our knowledge of how productivity and performance measurement...

Framework of product experience

NARCIS (Netherlands)

Desmet, P.; Hekkert, P.

2007-01-01

In this paper, we introduce a general framework for product experience that applies to all affective responses that can be experienced in human-product interaction. Three distinct components or levels of product experiences are discussed: aesthetic experience, experience of meaning, and emotional

Study on the Utilization of Paper Mill Sludge as Partial Cement Replacement in Concrete

Directory of Open Access Journals (Sweden)

Nazar A.M. Md

2014-03-01

Full Text Available A major problem arising from the widespread use of forestry biomass and processed timber waste as fuel is related to the production of significant quantities of ash as a by-product from the incineration of such biomasses. A major portion (approximately 70% of the wood waste ash produced is land-filled as a common method of disposal. If the current trend continues with waste products, such as paper mill sludge landfills, a large amount of space would be required by 2020. A revenue study was conducted as a result of investigations into the use of paper mill sludge as recycled materials and additives in concrete mixes for use in construction projects. The study had to provide the assurance that the concrete produced had the correct mechanical strength. Concrete mixes containing paper mill sludge were prepared, and their basic strength characteristics such as the compressive strength, flexural strength, ultra pulse velocity and dynamic modulus elasticity were tested. Four concrete mixes, i.e. a control mix, and a 10%, 20%, and 30% mix of paper mill sludge as cement replacement for concrete were prepared with a DoE mix design by calculating the weight of cement, sand and aggregate. The performance of each concrete specimen was compared with the strength of the control mix. As a result, when the percentage of paper mill sludge in the concrete increased, the strength decreased. Overall, a high correlation was observed between density and strength of the concrete containing paper mill sludge.

Safety and environmental aspects of heavy water production (Paper No. 4.1)

International Nuclear Information System (INIS)

Singh, Mohinder

1992-01-01

Different processes are utilised for heavy water production in the heavy water plants in India. H 2 S is used in large quantities as carrier gas to extract deuterium content from water. The safe handling of such large quantities of H 2 S gas poses a major problem because of its toxicity, high corrosive nature and high flammability. Handling of large quantities of synthesis gas in ammonia based plants at high pressure and temperature poses a major problem because it is a mixture of hydrogen and nitrogen. H 2 is highly inflammable and explosive when mixed with air or oxygen. All the safety aspects considered while designing, fabricating, constructing and operating the plants are described. (author). 5 tabs

Bioconversion of paper sludge to biofuel by simultaneous saccharification and fermentation using a cellulase of paper sludge origin and thermotolerant Saccharomyces cerevisiae TJ14

Directory of Open Access Journals (Sweden)

Harashima Satoshi

2011-09-01

Full Text Available Abstract Background Ethanol production from paper sludge (PS by simultaneous saccharification and fermentation (SSF is considered to be the most appropriate way to process PS, as it contains negligible lignin. In this study, SSF was conducted using a cellulase produced from PS by the hypercellulase producer, Acremonium cellulolyticus C-1 for PS saccharification, and a thermotolerant ethanol producer Saccharomyces cerevisiae TJ14 for ethanol production. Using cellulase of PS origin minimizes biofuel production costs, because the culture broth containing cellulase can be used directly. Results When 50 g PS organic material (PSOM/l was used in SSF, the ethanol yield based on PSOM was 23% (g ethanol/g PSOM and was two times higher than that obtained by a separate hydrolysis and fermentation process. Cellulase activity throughout SSF remained at around 60% of the initial activity. When 50 to 150 g PSOM/l was used in SSF, the ethanol yield was 21% to 23% (g ethanol/g PSOM at the 500 ml Erlenmeyer flask scale. Ethanol production and theoretical ethanol yield based on initial hexose was 40 g/l and 66.3% (g ethanol/g hexose at 80 h, respectively, when 161 g/l of PSOM, 15 filter paper units (FPU/g PSOM, and 20% inoculum were used for SSF, which was confirmed in the 2 l scale experiment. This indicates that PS is a good raw material for bioethanol production. Conclusions Ethanol concentration increased with increasing PSOM concentration. The ethanol yield was stable at PSOM concentrations of up to 150 g/l, but decreased at concentrations higher than 150 g/l because of mass transfer limitations. Based on a 2 l scale experiment, when 1,000 kg PS was used, 3,182 kFPU cellulase was produced from 134.7 kg PS. Produced cellulase was used for SSF with 865.3 kg PS and ethanol production was estimated to be 51.1 kg. Increasing the yeast inoculum or cellulase concentration did not significantly improve the ethanol yield or concentration.

A Conceptual Model for Production Leveling (Heijunka) Implementation in Batch Production Systems

OpenAIRE

De Araujo , Luciano Fonseca; De Queiroz , Abelardo Alves

2009-01-01

International audience; This paper explains an implementation model for a new method for Production Leveling designed for batch production system. The main structure of this model is grounded on three constructs: traditional framework for Operations Planning, Lean Manufacturing concepts for Production Leveling and case study guidelines. By combining the first and second construct, a framework for Production Leveling has been developed for batch production systems. Then, case study guidelines ...

NASA/DOD Aerospace Knowledge Diffusion Research Project. Paper 62: The Influence of Knowledge Diffusion on Aeronautics Innovation: The Research, Development, and Production of Large Commercial Aircraft in France, Germany, and the United Kingdom

Science.gov (United States)

Golich, Vicki L.; Pinelli, Thomas E.

1997-01-01

This paper focuses on how European public policies-individually and collectively - influence the diffusion of knowledge and technology. It begins with an overview of the roles played historically and currently by European governments in the Research, Development and Production (RD&P) of Large Commercial Aircraft (LCA). The analytical framework brings together literature from global political economy, comparative politics, business management, and science and technology policy studies. It distinguishes between the production of knowledge, on the one hand, and the dissemination of knowledge, on the other. France, Germany, and the United Kingdom serve as the analytical cases. The paper concludes with a call for additional research in this area, some tentative lessons learned, and a discussion of the consequences of national strategies and policies for the diffusion of knowledge and technology in an era of globalizaton.

Cyprus switches from paper to disk

Energy Technology Data Exchange (ETDEWEB)

Koontz, C.P.

1991-03-01

The Cyprus Coal Co. introduced the use of computer-aided design in planning and mapping operations at the company's Star Point No. 2 mine located south of Price, Utah and at the Orchard Valley mine near Craig, Colorado. CAD software is installed on a VAX 11/780 computer system. The process of converting large mine maps from paper to CAD files is described - the maps had to be broken down into layers. The CAD system has also introduced direct savings in mine planning and coal production by reducing engineering and surveying time at the mines and allowing a cost-effective response to government regulatory demands. 4 figs.

Designer-made meat and dairy products: Consumer-led product development

DEFF Research Database (Denmark)

Grunert, Klaus G.; Valli, Carlotta

2001-01-01

targeting these segments were derived and tested with consumers from these segments. Results show considerable potential for the development of food products which are differentiated in a consumer-based way. The paper closes with a step-model for consumer-led product development adapted to the current state...... of branding and differentiation in the product category.......Consumers differ in the kind of qualities they expect from food products, and they also differ in the way they infer quality from the product information available. Nevertheless, much product innovation in the food sector is still not geared towards specific consumer segments. This is especially...

Designer made meat and dairy products: Consumer-led product development

DEFF Research Database (Denmark)

Grunert, Klaus G.; Valli, Carlotta

targeting these segments were derived and tested with consumers from these segments. Results show considerable potential for the development of food products which are differentiated in a consumer-based way. The paper closes with a step-model for consumer-led product development adapted to the current state...... of branding and differentiation in the product category.......Consumers differ in the kind of qualities they expect from food products, and they also differ in the way they infer quality from the product information available. Nevertheless, much product innovation in the food sector is still not geared towards specific consumer segments. This is especially...

Sustainable Multi-Product Seafood Production Planning Under Uncertainty

International Nuclear Information System (INIS)

Simanjuntak, Ruth; Mawengkang, Herman; Sembiring, Monalisa; Sinaga, Rani; Pakpahan, Endang J

2013-01-01

A multi-product fish production planning produces simultaneously multi fish products from several classes of raw resources. The goal in sustainable production planning is to meet customer demand over a fixed time horizon divided into planning periods by optimizing the tradeoff between economic objectives such as production cost, waste processed cost, and customer satisfaction level. The major decisions are production and inventory levels for each product and the number of workforce in each planning period. In this paper we consider the management of small scale traditional business at North Sumatera Province which performs processing fish into several local seafood products. The inherent uncertainty of data (e.g. demand, fish availability), together with the sequential evolution of data over time leads the sustainable production planning problem to a nonlinear mixed-integer stochastic programming model. We use scenario generation based approach and feasible neighborhood search for solving the model.

BRAND - PRODUCT INTERDEPENDENCE

Directory of Open Access Journals (Sweden)

Tudor NISTORESCU

2014-06-01

Full Text Available In this paper we conceptually discussed the brands’ role in the society, the dimensions of branding and the relationship between the brand and the products. We adhere to the main ideas expressed in the literature, that the brand is more than a product. However the product is needed to render the brand tangible. The product is the magic box that delivers the brand experience. Without the product, the brand meaning would have difficulties in attracting customers. More studies are needed to investigate the brand-product relationship.

Energy conservation in pulp and paper industry: some thoughts

Energy Technology Data Exchange (ETDEWEB)

Sadawarte, N. S.; Prasad, A. K.; Khanolkar, V. D.; Shenoy, S. C.

1980-03-15

The pulp and paper industry is highly energy intensive. In view of the spiralling fuel prices and rising power costs, there is an urgent need to conserve energy through better management of various operations in the industry, from the optimal utilization of the forest residues to the shipment of the final product. The total energy concept, e.g., energy generation, distribution and utilization in Indian paper industry is discussed. The need for an energy audit is emphasized and the formats of energy reporting forms are included. Short and long term measures to be enforced to achieve energy savings in the pulp and paper mills are outlined. Some important energy conservation approaches are also discussed. Factors affecting energy efficiency in a pulp and paper mill are reviewed. Some areas where sustained R and D efforts should be focused to make the paper industry nearly self-sufficient in energy generation and utilization are also given. It is essential to have a National Energy Policy clearly defining achievable targets of energy conservation for industry. The Indian paper industry could advantageously form its own committee to review the operation of the various mills in the country and come out with concrete solutions for higher energy efficiency and more effective conservation of energy.

PaperBLAST: Text Mining Papers for Information about Homologs.

Science.gov (United States)

Price, Morgan N; Arkin, Adam P

2017-01-01

Large-scale genome sequencing has identified millions of protein-coding genes whose function is unknown. Many of these proteins are similar to characterized proteins from other organisms, but much of this information is missing from annotation databases and is hidden in the scientific literature. To make this information accessible, PaperBLAST uses EuropePMC to search the full text of scientific articles for references to genes. PaperBLAST also takes advantage of curated resources (Swiss-Prot, GeneRIF, and EcoCyc) that link protein sequences to scientific articles. PaperBLAST's database includes over 700,000 scientific articles that mention over 400,000 different proteins. Given a protein of interest, PaperBLAST quickly finds similar proteins that are discussed in the literature and presents snippets of text from relevant articles or from the curators. PaperBLAST is available at http://papers.genomics.lbl.gov/. IMPORTANCE With the recent explosion of genome sequencing data, there are now millions of uncharacterized proteins. If a scientist becomes interested in one of these proteins, it can be very difficult to find information as to its likely function. Often a protein whose sequence is similar, and which is likely to have a similar function, has been studied already, but this information is not available in any database. To help find articles about similar proteins, PaperBLAST searches the full text of scientific articles for protein identifiers or gene identifiers, and it links these articles to protein sequences. Then, given a protein of interest, it can quickly find similar proteins in its database by using standard software (BLAST), and it can show snippets of text from relevant papers. We hope that PaperBLAST will make it easier for biologists to predict proteins' functions.

Chosen aspects of evaluation of productive processes on the example of productive chains of gear

OpenAIRE

M. Roszak

2005-01-01

Purpose: The purpose of the study was to present an original approach to evaluation of the real productive chains, including its utilization as a benchmarking method.Design/methodology/approach: In the paper an analysis of value in the productive chains with account of activities based costs was used. The evaluation of the effectivity was made by econometric coefficients.Findings: The paper presents obtained particular results of the analysis of value in the productive chains indicating effec...

Production of GMP certified herbal products in Malaysian Nuclear Agency

International Nuclear Information System (INIS)

Daryl Jesus Arapoc; Bohari Yaacob; Zainah Adam

2015-01-01

This paper will discuss on up scaling production of herbal product. A pilot scale production plant were developed in Block 37 and equipped with automated and semi-automated production machines which have the capacity to produce 100 thousand pieces of tablet per hour. In order to ensure the quality of the products, raw material inspections, IPQC and FPQC will be done on each batch. Besides that, certification of GMP will be done concurrently. One of the products that will be launch soon is the Mas Cotek tablet. This product is the result of numerous years of researches that had been done in BTP. This includes formulation and production of the product itself. It is hope that more herbal products can be produce in near future. (author)

The Effect of Straw Fibers in Printing Papers on Dot Reproduction Attributes, as Realized by UV Inkjet Technology

Directory of Open Access Journals (Sweden)

Ivana Plazonic

2016-04-01

Full Text Available Paper performance qualities strongly depend on the origin of cellulose fibers. Awareness of environmental issues and sustainable development has led to the increase in the use of recycled printing papers. Recovered fibers are often used as a substitute for virgin wood fibers in the production of certain types of papers. As recovered fibers cannot provide the same quality level of paper products as virgin wood fibers, alternative sources of virgin cellulose fibers need to be identified. The aim of this research was to analyze the printability of laboratory papers made of different contents of straw pulp. Therefore, the printing papers were formed using straw pulp of three different cereal species (wheat, barley, and triticale and mixing them with recycled newsprint in different weight ratios. The printability of these laboratory papers was analyzed by classifying dot reproduction quality based on four dot reproduction attributes. Printed dot reproduction greatly affects the quality of reproduction in graphic products, as dots are the most important element in multi-color reproduction of texts and images. It was confirmed that laboratory papers containing straw pulp provide the same or even better dot reproduction quality than laboratory control papers formed only of recycled newsprint.

Probiotic fermented dairy products

OpenAIRE

Adnan Tamime; Rajka Božanić; Irena Rogelj

2003-01-01

Fermented dairy products are the most popular vehicle used in theindustry for the implantation of the probiotic microflora in humans. Therefore this paper provides an overview of new knowledge on probiotic fermented dairy products. It involves historical developments, commercial probiotic microorganisms and products, and their therapeutic properties, possibilities of quality improvement of different types of newly developed fermented dairy products together with fermented goat’s milk products.

Stability of captopril in powder papers under three storage conditions

International Nuclear Information System (INIS)

Taketomo, C.K.; Chu, S.A.; Cheng, M.H.; Corpuz, R.P.

1990-01-01

The stability of captopril in powder papers under three different storage conditions was determined. Captopril 12.5-mg tablets were triturated with lactose to a final concentration of 2 mg of captopril in 100 mg of powder. A total of 240 powder papers were prepared and stored in class A prescription vials (80 papers), 002G plastic zip-lock bags (80 papers), and Moisture Proof Barrier Bags (80 papers). Immediately after preparation and at 1, 2, 3, 4, 8, 12, and 24 weeks of storage at room temperature, powder papers under each storage condition were reweighed and the contents were assayed for captopril concentration by a stability-indicating high-performance liquid chromatographic method. More than 90% of the initial captopril concentration was retained under all storage conditions during the first 12 weeks of the study. Captopril disulfide, a degradation product, was detected in one sample stored in a plastic zip-lock bag at 24 weeks. Captopril was stable for the entire 24-week period in powder papers stored in either the class A prescription vial or the Moisture Proof Barrier Bag. Captopril in powder papers is stable for at least 12 weeks when stored at room temperature under all three storage conditions

Global product development

DEFF Research Database (Denmark)

Taylor, Thomas Paul; Ahmed-Kristensen, Saeema

2016-01-01

Selecting key performance indicators in conventional product development is a challenging task for project management and is compound by global product development. Informed from the findings of two in depth case studies conducted with large Danish manufacturing companies, in this paper we develo...

A high-fidelity model for coupling flow and mechanical deformation of the porous paper web - a key to improved understanding of dewatering and rewet at the press section in paper making

Energy Technology Data Exchange (ETDEWEB)

Hao, Y. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Trebotich, D. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Wang, W. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Xu, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Turpin, D. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2017-04-05

The U.S. pulp and paper industry is the third-largest manufacturing user of energy, with an energy demand of 2,540 trillion Btu in 2010. Within the papermaking process, drying consumes over 400 trillion Btu annually which makes it one of the largest energy saving opportunities. In the 2014 Forest Products Industry Technology Roadmap, it is concluded that increasing the paper web solid content entering the dryer section from the current 45- 55 percent to approaching 65 percent, which would save 1.0 MMBtu per ton or 20 percent of the energy used in drying, is one of the most needed technology breakthroughs to achieve a more sustainable approach for manufacturing pulp and paper products. Achieving such significant energy savings highly depends on understanding the fundamental dynamics of the wet press process and then developing optimized solutions for design of more energy-efficient press processes and equipment. The objective of this project is to develop reliable computational capabilities to accurately simulate the flow of water from/to the porous pulp medium (dewatering/rewetting) during the pressing process in paper making.

COINCO Strategy 2025 - Discussion Paper

DEFF Research Database (Denmark)

Jespersen, Per Homann; Jensen, Anne; Stroschein, Christoph

 The regions and cities in the COINCO-corridor Oslo-Göteborg-Malmö-Copenhagen-Berlin have worked out a strategy proposal which is presented in this discussion paper. Behind the strategy is a political will to utilize mutual strengths and together become a leading player in a globalized world, based...... on matters essential to development - ‘hard' issues such as transport infrastructure and ‘soft' issues on improving cooperation within business, administration and knowledge production. The synergy of COINCO will have to come from collaboration among businesses. Supporting cooperation between existing...... to be institutionally supported. Therefore a number of knowledge institutions have to be formed organized around the ‘triple helix'-principle - a tight collaboration between business, administration and knowledge producers, especially universities. Also new ways of collaboration have to be explored - ‘network...

A two-dimensional model of the pressing section of a paper machine including dynamic capillary effects

KAUST Repository

Iliev, Oleg P.

2013-05-15

Paper production is a problem with significant importance for society; it is also a challenging topic for scientific investigation. This study is concerned with the simulation of the pressing section of a paper machine. A two-dimensional model is developed to account for the water flow within the pressing zone. A Richards-type equation is used to describe the flow in the unsaturated zone. The dynamic capillary pressure-saturation relation is adopted for the paper production process. The mathematical model accounts for the coexistence of saturated and unsaturated zones in a multilayer computational domain. The discretization is performed by the MPFA-O method. Numerical experiments are carried out for parameters that are typical of the production process. The static and dynamic capillary pressure-saturation relations are tested to evaluate the influence of the dynamic capillary effect. © 2013 Springer Science+Business Media Dordrecht.

Production Leveling (Heijunka) Implementation in a Batch Production System: A Case Study

OpenAIRE

Araujo , Luciano Fonseca; Queiroz , Abelardo Alves

2009-01-01

International audience; This paper presents a case study of an implementation of a new method for Production Leveling designed for batch production. It includes prioritizing criteria of products and level production plan. Moreover, it was applied on a subsidiary of a multinational enterprise located on Brazil, which manufacturing processes comprise batch production in a make-to-stock policy. Regarding a qualitative assessment, evidences show that the company had deficient practices related to...

Propagation of engineering changes to multiple product data views using history of product structure changes

NARCIS (Netherlands)

Do, N.; Choi, I.; Song, M.S.

2008-01-01

Abstract The present paper proposes a comprehensive procedure for engineering change propagation in order to maintain consistency between various product data views. A product data model is also proposed for the propagation procedure, which integrates base product definitions for product design, and

Different approaches to overcome uncertainties of production systems

Science.gov (United States)

Azizi, Amir; Sorooshian, Shahryar

2015-05-01

This study presented a comprehensive review on the understanding of uncertainty and the current approaches that have been proposed to handle the uncertainties in the production systems. This paper classified proposed approaches into 11 groups. The paper studied 114 scholarly papers through various international journals. The paper added the latest findings to the body of knowledge to the current reservoir of understanding of the production uncertainties. Thus, the paper prepared the needs of researchers and practitioners for easy references in this area. This review also provided an excellent source to continue further studies on how to deal with the uncertainties of production system.

Basic semantics of product sounds

NARCIS (Netherlands)

Özcan Vieira, E.; Van Egmond, R.

2012-01-01

Product experience is a result of sensory and semantic experiences with product properties. In this paper, we focus on the semantic attributes of product sounds and explore the basic components for product sound related semantics using a semantic differential paradigmand factor analysis. With two

Final technical report: Commercialization of the Biofine technology for levulinic acid production from paper sludge

Energy Technology Data Exchange (ETDEWEB)

Fitzpatrick, Stephen W.

2002-04-23

This project involved a three-year program managed by BioMetics, Inc. (Waltham, MA) to demonstrate the commercial feasibility of Biofine thermochemical process technology for conversion of cellulose-containing wastes or renewable materials into levulinic acid, a versatile platform chemical. The program, commencing in October 1995, involved the design, procurement, construction and operation of a plant utilizing the Biofine process to convert 1 dry ton per day of paper sludge waste. The plant was successfully designed, constructed, and commissioned in 1997. It was operated for a period of one year on paper sludge from a variety of source paper mills to collect data to verify the design for a commercial scale plant. Operational results were obtained for four different feedstock varieties. Stable, continuous operation was achieved for two of the feedstocks. Continuous operation of the plant at demonstration scale provided the opportunity for process optimization, development of operational protocols, operator training and identification of suitable materials of construction for scale up to commercial operation . Separated fiber from municipal waster was also successfully processed. The project team consisted of BioMetics Inc., Great Lakes Chemical Corporation (West Lafayette, IN), and New York State Energy Research and Development Authority (Albany, NY).

Resolving traceability issues of product derivation for software product lines

OpenAIRE

Abid, Saad bin

2009-01-01

peer-reviewed Dealing with traceability management issues during model based product derivation in large complex industrial SPL is error prone due to the lack of tool support. As a result traceability management between connected models emerges as an important research topic. In this position paper, we discuss research challenges as scenarios from developed example product line and give recommendations on resolving traceability issues during product derivation. We also discuss initial idea...

Cartographic Rules and Differences in Nautical Data Visualization on Paper and Electronic Nautical Charts

Directory of Open Access Journals (Sweden)

Tea Duplančić Leder

2013-04-01

Full Text Available This paper aims to present cartographic rules for the production of paper and electronic navigational charts and main differences in compilation, visualisation and representation of nautical information. Major differences between paper nautical charts and ENC are visualisation of nautical data: colour mixing, resolution of represented nautical objects, human control of display representation and fonts and signatures and chart content are described. It is concluded that electronic navigational charts have many advantages and few shortcomings to paper navigational charts.

Extending product modeling methods for integrated product development

DEFF Research Database (Denmark)

Bonev, Martin; Wörösch, Michael; Hauksdóttir, Dagný

2013-01-01

Despite great efforts within the modeling domain, the majority of methods often address the uncommon design situation of an original product development. However, studies illustrate that development tasks are predominantly related to redesigning, improving, and extending already existing products...... and PVM methods, in a presented Product Requirement Development model some of the individual drawbacks of each method could be overcome. Based on the UML standard, the model enables the representation of complex hierarchical relationships in a generic product model. At the same time it uses matrix....... Updated design requirements have then to be made explicit and mapped against the existing product architecture. In this paper, existing methods are adapted and extended through linking updated requirements to suitable product models. By combining several established modeling techniques, such as the DSM...

The Traceability and Safety of Fishery Products

Directory of Open Access Journals (Sweden)

Gheorghe Adrian ZUGRAVU

2012-12-01

Full Text Available The paper follows two main objectives: to understand consumers’ perception of safety trasability and quality of fishery products and to identify communication levers in order to improve the perceived image of fishery products. The present research is focused on the fishery products, regardless of their presentation – fresh, frozen or processed. This paper conducted a questionnaire survey of Romanian consumers’ perception toward fishery products. The empirical study with brands indicated that consumers are different awareness to domestic and foreign safety fish products. National fishery products got more attention from the consumers.

Thermopressure hydrolysis. Paper; Thermodruckhydrolyse. Paper

Energy Technology Data Exchange (ETDEWEB)

Stahl, R. [Scheuchl GmbH, Ortenburg (Germany); Prechtl, S. [Applikations- und Technikzentrum fuer Energieverfahrens-, Umwelt- und Stroemungstechnik (ATZ-EVUS), Sulzbach-Rosenberg (Germany)

2000-12-01

This paper presents a processing method which consists in thermal hydrolysis and subsequent anaerobic fermentation and is especially well suited for wet, low-structure organic wastes. [German] Das vorgestellte Verwertungsverfahren bestehend aus thermischer Hydrolyse und anschliessender anaerober Vergaerung eignet sich besonders fuer nasse, strukturarme organische Abfaelle. (orig.)

Principles and practices of lean production applied in a metal structures production system

OpenAIRE

Carvalho, Rogério; Alves, Anabela Carvalho; Lopes, Isabel da Silva

2011-01-01

This paper presents a work undertaken in a metal structures production system in a company producing several assorted products for the civil construction. The work aim was to improve the production process, solving several productive problems encountered in the production system, such as: deliveries delays, long lead times, too many material handling, high stocks, errors and defects in metal structures assembly and production, and unnecessary motions. The identified problems were analyzed and...

The Traceability and Safety of Fishery Products

OpenAIRE

Gheorghe Adrian ZUGRAVU; Ionica SOARE

2012-01-01

The paper follows two main objectives: to understand consumers’ perception of safety trasability and quality of fishery products and to identify communication levers in order to improve the perceived image of fishery products. The present research is focused on the fishery products, regardless of their presentation – fresh, frozen or processed. This paper conducted a questionnaire survey of Romanian consumers’ perception toward fishery products. The empirical study with brands indicated that ...

Investing in Our Young People. NBER Working Paper No. 16201

Science.gov (United States)

Cunha, Flavio; Heckman, James J.

2010-01-01

This paper reviews the recent literature on the production of skills of young persons. The literature features the multiplicity of skills that explain success in a variety of life outcomes. Noncognitive skills play a fundamental role in successful lives. The dynamics of skill formation reveal the interplay of cognitive and noncognitive skills, and…

Menstruation and Education in Nepal. NBER Working Paper No. 14853

Science.gov (United States)

Oster, Emily; Thornton, Rebecca

2009-01-01

This paper presents the results from a randomized evaluation that distributed menstrual cups (menstrual sanitary products) to adolescent girls in rural Nepal. Girls in the study were randomly allocated a menstrual cup for use during their monthly period and were followed for fifteen months to measure the effects of having modern sanitary products…

Between Product Development and Mass Production: Tensions as Triggers for Concept-Level Learning

Science.gov (United States)

Jalonen, Meri; Ristimäki, Päivi; Toiviainen, Hanna; Pulkkis, Anneli; Lohtander, Mika

2016-01-01

Purpose: This paper aims to analyze learning in organizational transformations by focusing on concept-level tensions faced in two young companies, which were searching for a reorientation of activity with a production network between innovative product development and efficient mass production. Design/methodology/approach: An intervention-based…

Future opportunities in production of disposable optics and electronics

Science.gov (United States)

Korhonen, Raimo

2001-05-01

The several production methods of paper processing chain can be used, by analogy, to generate novel ideas for production of optics and electronics. Paper processing is a very fast reel-to-reel process: In the beginning of the paper web production the process is running at the speed of over thousand meters per minute and the web width can be 10 meters, and still at the later stages the speed is several hundreds of meters per minute with the web width of a couple of meters. There are several potential reel-to-reel production methods like embossing, printing, laminating and different kinds of vacuum coating, for example evaporation and sputtering. End products are complex multi-layer composite structures. The benefits from this analogy for optics and electronics would be ideas for ultra fast production, paper-like disposable and recyclable products and the integration of optics and electronics into ordinary things like books, wallpapers, tissue papers and packages. Two experiments are presented to demonstrate the possibilities. In the first experiment optical patterns are embossed directly on paper. In the second one conductive polymers are printed on paper and plastic webs. In future, a wide network of cooperation will be needed to realize all the opportunities.

Selected working papers

International Nuclear Information System (INIS)

2002-01-01

The following working papers are included in this report: WP 2002-2, Dictionary Restructuring; WP-2002-4, Page numbers for REFERENCE (CP-C/285); WP-2002-5, Correlation quantities; WP 2002-8, Proposed data heading EN-CM-TOT (memo CP-A/121); WP 2002-9, Proposed high energy quantities (memo CP-A/123); WP 2002-11, Use of nuclide codes in SF 7 (memo CP-C/302); WP 2002-12, Redundant coding, new data heading PART-OUT; WP 2002-16, Zeros in error field (CP-C/306); WP 2002-17, Multiple appearance of the first Reference in EXFOR; WP 2002-18 + Add., EXFOR master file comparisons; WP 2002-19, Measures of Security at the NDS Open Area for EXFOR; WP 2002-20, New and revised entries received at NDS; WP 2002-21, EXFOR transmissions (NNDC); WP 2002-22, CINDA statistics (NNDC); WP 2002-24, CINDA batch exchange information (NDS); WP 2002-25, Journal coverage for CINDA; WP 2002-26, EXFOR-relational as multi-platform database (V. Zerkin); WP 2002-27, Completeness of EXFOR compil. as indexed by CINDA; WP 2002-28, Future NRDC Cooperation on CINDA: see Appendix 9; WP 2002-31, Development of Web Editor for Charged-Particle Nuclear Reaction Data (N. Otuka, H. Noto, A. Ohnishi, K. Kato). The following other papers, or the memos of which they consist, are available from the IAEA Nuclear Data Section: WP 2002-1, Actions of previous meetings (2002, 2001) see INDC(NDS)-427, pp.20-26, and INDC(NDS)-418, pp.26-31; WP 2002-3, Units for particle and product yields: see memos CP-C/294, 286; WP 2002-6, 4-momentum transfer and mom.distr.data: see memos CP-C/295 and CP-D/330; WP 2002-7, Several 'straightforward' new quantities: see memos CP-/C-291, 298 and CP-A/118; WP 2002-10, Quantities proposed by JCPRG (see memos DP-D/337, CP-E/004, 003); WP 2002-13, Clarifications on Product Yields and Thick Target Yields (see memo CP-D/332); WP 2002-14, Clarifications on Polarization quantities (see memo CP-D/320); WP 2002-15, New Legendre polynomial modifier proposed (see CP-C/305); WP 2002-23, see memo 4C-4

Productivity

DEFF Research Database (Denmark)

Spring, Martin; Johnes, Geraint; Hald, Kim Sundtoft

Productivity is increasingly critical for developed economies. It has always been important: as Paul Krugman puts it, “Productivity isn’t everything, but in the long run it is almost everything. A country’s ability to improve its standard of living over time depends almost entirely on its ability...... to raise its output per worker”(Krugman, 1994). Analyses of productivity have, by and large, been the preserve of economists. Operations Management (OM) is rooted in a similar concern for the efficient use of scarce resources; Management Accounting (MA) is concerned with the institutionalised measurement...... and management of productivity. Yet the three perspectives are rarely connected. This paper is a sketch of a literature review seeking to identify, contrast and reconcile these three perspectives. In so doing, it aims to strengthen the connections between policy and managerial analyses of productivity....

Corrosion/96 conference papers

International Nuclear Information System (INIS)

Anon.

1996-01-01

Topics covered by this conference include: cathodic protection in natural waters; cleaning and repassivation of building HVAC systems; worldwide opportunities in flue gas desulfurization; advancements in materials technology for use in oil and gas service; fossil fuel combustion and conversion; technology of corrosion inhibitors; computers in corrosion control--modeling and information processing; recent experiences and advances of austenitic alloys; managing corrosion with plastics; corrosion measurement technology; corrosion inhibitors for concrete; refining industry; advances in corrosion control for rail and tank trailer equipment; CO 2 corrosion--mechanisms and control; microbiologically influenced corrosion; corrosion in nuclear systems; role of corrosion in boiler failures; effects of water reuse on monitoring and control technology in cooling water applications; methods and mechanisms of scale and deposit control; corrosion detection in petroleum production lines; underground corrosion control; environmental cracking--relating laboratory results and field behavior; corrosion control in reinforced concrete structures; corrosion and its control in aerospace and military hardware; injection and process addition facilities; progress reports on the results of reinspection of deaerators inspected or repaired per RP0590 criteria; near 100% volume solids coating technology and application methods; materials performance in high temperature environments containing halides; impact of toxicity studies on use of corrosion/scale inhibitors; mineral scale deposit control in oilfield related operations; corrosion in gas treating; marine corrosion; cold climate corrosion; corrosion in the pulp and paper industry; gaseous chlorine alternatives in cooling water systems; practical applications of ozone in recirculating cooling water systems; and water reuse in industry. Over 400 papers from this conference have been processed separately for inclusion on the data base

A review on wax printed microfluidic paper-based devices for international health.

Science.gov (United States)

Altundemir, S; Uguz, A K; Ulgen, K

2017-07-01

Paper-based microfluidics has attracted attention for the last ten years due to its advantages such as low sample volume requirement, ease of use, portability, high sensitivity, and no necessity to well-equipped laboratory equipment and well-trained manpower. These characteristics have made paper platforms a promising alternative for a variety of applications such as clinical diagnosis and quantitative analysis of chemical and biological substances. Among the wide range of fabrication methods for microfluidic paper-based analytical devices ( μ PADs), the wax printing method is suitable for high throughput production and requires only a commercial printer and a heating source to fabricate complex two or three-dimensional structures for multipurpose systems. μ PADs can be used by anyone for in situ diagnosis and analysis; therefore, wax printed μ PADs are promising especially in resource limited environments where people cannot get sensitive and fast diagnosis of their serious health problems and where food, water, and related products are not able to be screened for toxic elements. This review paper is focused on the applications of paper-based microfluidic devices fabricated by the wax printing technique and used for international health. Besides presenting the current limitations and advantages, the future directions of this technology including the commercial aspects are discussed. As a conclusion, the wax printing technology continues to overcome the current limitations and to be one of the promising fabrication techniques. In the near future, with the increase of the current interest of the industrial companies on the paper-based technology, the wax-printed paper-based platforms are expected to take place especially in the healthcare industry.

Paper Town: The Social Production of Territory in the Industrial Town of Atenquique, Mexico

Directory of Open Access Journals (Sweden)

Alejandro Ponce de León Pagaza

2018-05-01

Full Text Available This article analyzes the social production of space in Atenquique, an industrial town in the southern region of Jalisco in western Mexico. The theoretical framework draws on insights from critical geography. Through the case of Atenquique we reflect on the transformation of the area from the beginning of the neoliberal period in Mexico. Neoliberalism ushered in the growth of precarious and insecure working conditions, something which has deepened over the past several decades. The methodology employed is based on ethnographic research undertaken over a period of four months in Atenquique. During this time period we used three different audiovisual methods to collect information: photography, oral history and the production of an ethnographic documentary film. The results of the study show how the ex-inhabitants of Atenquique have knit together complex constructions- both material and symbolic- that provide insight on how the changes of the past several decades have affected the area. In the conclusions, we return to the broader debates on the local and territorial consequences of the implementation of the neoliberal policies in Mexico.

Co-ordinating Product Developing Activities

DEFF Research Database (Denmark)

Terkelsen, Søren Bendix

1996-01-01

The paper contains a presentation of research methods to be used in case studies in product development and a presentation on how to deal with Design Co-ordination according to litterature......The paper contains a presentation of research methods to be used in case studies in product development and a presentation on how to deal with Design Co-ordination according to litterature...

History of Hanford Site Defense Production (Brief)

Energy Technology Data Exchange (ETDEWEB)

GERBER, M S

2001-02-01

This paper acquaints the audience with the history of the Hanford Site, America's first full-scale defense plutonium production site. The paper includes the founding and basic operating history of the Hanford Site, including World War II construction and operations, three major postwar expansions (1947-55), the peak years of production (1956-63), production phase downs (1964-the present), a brief production spurt from 1984-86, the end of the Cold War, and the beginning of the waste cleanup mission. The paper also delineates historical waste practices and policies as they changed over the years at the Hanford Site, past efforts to chemically treat, ''fractionate,'' and/or immobilize Hanford's wastes, and resulting major waste legacies that remain today. This paper presents original, primary-source research into the waste history of the Hanford Site. Finally, the paper places the current Hanford Site waste remediation endeavors in the broad context of American and world history.

History of Hanford Site Defense Production (Brief)

International Nuclear Information System (INIS)

GERBER, M.S.

2001-01-01

This paper acquaints the audience with the history of the Hanford Site, America's first full-scale defense plutonium production site. The paper includes the founding and basic operating history of the Hanford Site, including World War II construction and operations, three major postwar expansions (1947-55), the peak years of production (1956-63), production phase downs (1964-the present), a brief production spurt from 1984-86, the end of the Cold War, and the beginning of the waste cleanup mission. The paper also delineates historical waste practices and policies as they changed over the years at the Hanford Site, past efforts to chemically treat, ''fractionate,'' and/or immobilize Hanford's wastes, and resulting major waste legacies that remain today. This paper presents original, primary-source research into the waste history of the Hanford Site. Finally, the paper places the current Hanford Site waste remediation endeavors in the broad context of American and world history

A paper-based microbial fuel cell: instant battery for disposable diagnostic devices.

Science.gov (United States)

Fraiwan, Arwa; Mukherjee, Sayantika; Sundermier, Steven; Lee, Hyung-Sool; Choi, Seokheun

2013-11-15

We present a microfabricated paper-based microbial fuel cell (MFC) generating a maximum power of 5.5 μW/cm(2). The MFC features (1) a paper-based proton exchange membrane by infiltrating sulfonated sodium polystyrene sulfonate and (2) micro-fabricated paper chambers by patterning hydrophobic barriers of photoresist. Once inoculum and catholyte were added to the MFC, a current of 74 μA was generated immediately. This paper-based MFC has the advantages of ease of use, low production cost, and high portability. The voltage produced was increased by 1.9 × when two MFC devices were stacked in series, while operating lifetime was significantly enhanced in parallel. Copyright © 2013 Elsevier B.V. All rights reserved.

Social Gains from Female Education: A Cross-National Study. World Bank Discussion Papers 194.

Science.gov (United States)

Subbarao, K.; Raney, Laura

This paper on the social gains from female education is part of a series, prepared by the World Bank, on the benefits of improving opportunities for women. The paper suggests that expanding women's opportunities enhances their productivity and earning potential and thus contributes to better economic performance and poverty alleviation. Education…

White paper on science and technology, 1990

International Nuclear Information System (INIS)

1991-01-01

Today, it is apparent that science and technology are major driving force for nation's economic growth. Japan is utilizing its scientific and technological ability to produce superior products. Thus Japan has become an economic giant. The citizenry of Japan are enjoying the benefits of these scientific and technological advances. In recent years, the socioeconomic situation in the country has improved. As a result, the people of Japan want the quality of life in addition to material goods. There are expectations for improving the quality of life, while at the same time, solving such problems as the aging of the society and global environmental concerns. From these perspectives, in this paper, how science and technology have contributed to improve the quality of life and how those have been applied are analyzed. It is hoped that this paper is useful as a basic reference in considering Japanese socioeconomic goals for the 21st century. Furthermore, the government tries to address the problems pointed out in this paper, and promote the advancement of Japanese science and technology. The status of Japanese science and technology, expectations for science and technology and the science and technology policy in foreign countries and Japan are described. (K.I.)

Selection of productivity improvement techniques via mathematical modeling

Directory of Open Access Journals (Sweden)

Mahassan M. Khater

2011-07-01

Full Text Available This paper presents a new mathematical model to select an optimal combination of productivity improvement techniques. The proposed model of this paper considers four-stage cycle productivity and the productivity is assumed to be a linear function of fifty four improvement techniques. The proposed model of this paper is implemented for a real-world case study of manufacturing plant. The resulted problem is formulated as a mixed integer programming which can be solved for optimality using traditional methods. The preliminary results of the implementation of the proposed model of this paper indicate that the productivity can be improved through a change on equipments and it can be easily applied for both manufacturing and service industries.

Soy production and certification

DEFF Research Database (Denmark)

Tomei, Julia; Semino, Stella Maris; Paul, Helena

2010-01-01

With the rising emphasis on biofuels as a potential solution to climate change, this paper asks whether certification schemes, developed to promote sustainable feedstock production, are able to deliver genuine sustainability benefits. The Round Table on Responsible Soy (RTRS) is a certification...... the social and environmental impacts of soybean production can be mitigated by the RTRS. It concludes that at present certification schemes are unlikely to be able to address either the institutional challenges associated with their implementation or the detrimental impacts of the additional demand generated...... scheme that aims to promote responsible soy production through the development of principles and criteria. However, can and does this initiative address the negative impacts associated with the intensive production of soy? Taking the example of soy biodiesel produced in Argentina, this paper asks whether...

ASAS Centennial Paper: Impact of animal science research on United States goat production and predictions for the future.

Science.gov (United States)

Sahlu, T; Dawson, L J; Gipson, T A; Hart, S P; Merkel, R C; Puchala, R; Wang, Z; Zeng, S; Goetsch, A L

2009-01-01

Goat research in the United States has increased but at a rate less than that in production. Research on goat meat includes nutritional quality, packaging, color, sensory characteristics, and preslaughter management. Goat skins have value for leather, but quality of goat leather has not been extensively studied. Research in the production, quality, antibiotic residues, and sensory characteristics of goat milk and its products has aided development of the US dairy goat industry. Limited progress has been made in genetic improvement of milk or meat production. There is need to explore applications of genomics and proteomics and improve consistency in texture and functionality of goat cheeses. New goat meat and milk products are needed to increase demand and meet the diverse tastes of the American public. Despite research progress in control of mohair and cashmere growth, erratic prices and sale of raw materials have contributed to further declines in US production. Innovative and cooperative ventures are needed for profit sharing up to the consumer level. Internal parasites pose the greatest challenge to goat production in humid areas largely because of anthelmintic resistance. Study of alternative controls is required, including immunity enhancement via nutrition, vaccination, pasture management such as co-grazing with cattle, and genetic resistance. Similarly, the importance of health management is increasing related in part to a lack of effective vaccines for many diseases. Nutrition research should address requirements for vitamins and minerals, efficiencies of protein utilization, adjusting energy requirements for nutritional plane, acclimatization, and grazing conditions, feed intake prediction, and management practices for rapid-growth production systems. Moreover, efficient technology transfer methods are needed to disseminate current knowledge and that gained in future research.

Influence of pretreatment techniques on anaerobic digestion of pulp and paper mill sludge: A review.

Science.gov (United States)

Veluchamy, C; Kalamdhad, Ajay S

2017-12-01

Pulp and paper industry is one of the most polluting, energy and water intensive industries in the world. Produced pulp and paper mill sludge (PPMS) faces a major problem for handling and its management. An anaerobic digestion has become an alternative source. This review provides a detailed summary of anaerobic digestion of PPMS - An overview of the developments and improvement opportunities. This paper explores the different pretreatment methods to enhance biogas production from the PPMS. First, the paper gives an overview of PPMS production, and then it reviews PPMS as a substrate for anaerobic digestion with or without pretreatment. Finally, it discuss the optimal condition and concentration of organic and inorganic compounds required for the anaerobic metabolic activity. Future research should focus on the combination of different pretreatment technologies, relationship between sludge composition, reactor design and its operation, and microbial community dynamics. Copyright © 2017 Elsevier Ltd. All rights reserved.

77 FR 61390 - Certain Lined Paper Products From the People's Republic of China: Notice of Final Results and...

Science.gov (United States)

2012-10-09

... filler paper, graph paper, and laboratory notebooks, and with the smaller dimension of the paper... Duties; Final Rule, 62 FR 27296, 27340 (May 19, 1997); see also Nippon Steel Corp. v. United States, 337... companies within that country are subject to government control and thus should be assessed a single...

From Commodity Production to Sign Production: A Triple Triangle Model for Marx's Semiotics and Peirce's Economics.

Science.gov (United States)

Kim, Joohoan

Using the viewpoint of semiotics, this paper "re-reads" Karl Marx's labor theory of value and suggests a "triple triangle" model for commodity production and shows how this model could be a model for semiosis in general. The paper argues that there are three advantages to considering homogeneity of the sign production and the…

Paper Capillary Enables Effective Sampling for Microfluidic Paper Analytical Devices.

Science.gov (United States)

Shangguan, Jin-Wen; Liu, Yu; Wang, Sha; Hou, Yun-Xuan; Xu, Bi-Yi; Xu, Jing-Juan; Chen, Hong-Yuan

2018-06-06

Paper capillary is introduced to enable effective sampling on microfluidic paper analytical devices. By coupling mac-roscale capillary force of paper capillary and microscale capillary forces of native paper, fluid transport can be flexibly tailored with proper design. Subsequently, a hybrid-fluid-mode paper capillary device was proposed, which enables fast and reliable sampling in an arrayed form, with less surface adsorption and bias for different components. The resulting device thus well supports high throughput, quantitative, and repeatable assays all by hands operation. With all these merits, multiplex analysis of ions, proteins, and microbe have all been realized on this platform, which has paved the way to level-up analysis on μPADs.

Comparisons of four categories of waste recycling in China’s paper industry based on physical input–output life-cycle assessment model

International Nuclear Information System (INIS)

Liang Sai; Zhang, Tianzhu; Xu Yijian

2012-01-01

Highlights: ► Using crop straws and wood wastes for paper production should be promoted. ► Bagasse and textile waste recycling should be properly limited. ► Imports of scrap paper should be encouraged. ► Sensitivity analysis, uncertainties and policy implications are discussed. - Abstract: Waste recycling for paper production is an important component of waste management. This study constructs a physical input–output life-cycle assessment (PIO-LCA) model. The PIO-LCA model is used to investigate environmental impacts of four categories of waste recycling in China’s paper industry: crop straws, bagasse, textile wastes and scrap paper. Crop straw recycling and wood utilization for paper production have small total intensity of environmental impacts. Moreover, environmental impacts reduction of crop straw recycling and wood utilization benefits the most from technology development. Thus, using crop straws and wood (including wood wastes) for paper production should be promoted. Technology development has small effects on environmental impacts reduction of bagasse recycling, textile waste recycling and scrap paper recycling. In addition, bagasse recycling and textile waste recycling have big total intensity of environmental impacts. Thus, the development of bagasse recycling and textile waste recycling should be properly limited. Other pathways for reusing bagasse and textile wastes should be explored and evaluated. Moreover, imports of scrap paper should be encouraged to reduce large indirect impacts of scrap paper recycling on domestic environment.

Research on Mechanism of Paper Burning by Thermogravimetric Analysis

Institute of Scientific and Technical Information of China (English)

QIN Da; HAN Xingzhou; WANG Xiaoguang; QI Fengliang; WANG Zijie; GUO Zihan; HAO Hongguang

2015-01-01

The examination of charred document is a challenge and usually requires a careful application of certain scientific techniques due to its unstable property. To address this issue, the mechanism of paper burning was studied in this paper. Here thermal-gravimetry (TG) was applied to investigate five kinds of paper, along with their TG and derivative thermogravimetric curve (DTG) observed at different atmospheric conditions. The results showed that the shape of curves, albeit similar, varied with the physical and chemical composition of paper. In the burning process, dehydration and de-polymerization are the two main pathways for cellulose, the major ingredient of paper. The heating rate indicated little influence on the curves while the sort of atmosphere worked strongly. The reason is due to the lack of tar oxidation when nitrogen used as the atmospheric environment. At moderate temperature, de-polymerization prevails and the tar can be observed. With temperature increasing, the tar and cellulose are further decomposed, leading to products of high boiling-point. According to the results, the charred document can be classified as one of the dehydrated, tarred, charred and ashed. Except the ashed stage, the other three can be handled and the writing whereon can be deciphered. The results exposed hereof may provide a fundamental for examining and deciphering charred document.

PaperBLAST: Text Mining Papers for Information about Homologs

International Nuclear Information System (INIS)

Price, Morgan N.; Arkin, Adam P.

2017-01-01

Large-scale genome sequencing has identified millions of protein-coding genes whose function is unknown. Many of these proteins are similar to characterized proteins from other organisms, but much of this information is missing from annotation databases and is hidden in the scientific literature. To make this information accessible, PaperBLAST uses EuropePMC to search the full text of scientific articles for references to genes. PaperBLAST also takes advantage of curated resources (Swiss-Prot, GeneRIF, and EcoCyc) that link protein sequences to scientific articles. PaperBLAST’s database includes over 700,000 scientific articles that mention over 400,000 different proteins. Given a protein of interest, PaperBLAST quickly finds similar proteins that are discussed in the literature and presents snippets of text from relevant articles or from the curators. With the recent explosion of genome sequencing data, there are now millions of uncharacterized proteins. If a scientist becomes interested in one of these proteins, it can be very difficult to find information as to its likely function. Often a protein whose sequence is similar, and which is likely to have a similar function, has been studied already, but this information is not available in any database. To help find articles about similar proteins, PaperBLAST searches the full text of scientific articles for protein identifiers or gene identifiers, and it links these articles to protein sequences. Then, given a protein of interest, it can quickly find similar proteins in its database by using standard software (BLAST), and it can show snippets of text from relevant papers. We hope that PaperBLAST will make it easier for biologists to predict proteins’ functions.

Fumed metallic oxides and conventional pigments for glossy inkjet paper

Science.gov (United States)

Lee, Hyunkook

Product development activity in the area of inkjet printing papers has accelerated greatly to meet the rapidly growing market for inkjet papers. Advancements in inkjet printing technology have also placed new demands on the paper substrate due to faster printing rates, greater resolution through increased drop volumes, and colorants added to the ink. To meet these requirements, papermakers are turning to pigmented size press formulations or pigmented coating systems. For inkjet coating applications, both the internal porosity of the pigment particles as well as the packing porosity of the coating affect print quality and dry time. Pores between the pigment particles allow for rapid diffusion of ink fluids into the coating structure, while also providing capacity for ink fluid uptake. Past research has shown the presence of coating cracks to increase the microroughness of the papers, consequently reducing the gloss of the silica/polyvinyl alcohol based coating colors. Coating cracks were not observed, at the same level of magnification, in the scanning electron microscopy images of alumina/polyvinyl alcohol coated papers. Studies are therefore needed to understand the influence of coating cracking on the microroughening of silica/polyvinyl alcohol based coatings and consequences to coating and ink gloss. Since micro roughening is known to be linked to shrinkage of the coating layer, studies are needed to determine if composite pigments can be formulated, which would enable the coating solids of the formulations to be increased to minimize the shrinkage of coating layer during drying. Coating solids greater than 55% solids are needed to reduce the difference between application solids and the coating's immobilization solids point in order to reduce shrinkage. The aim of this research was to address the above mentioned needed studies. Studies were performed to understand the influence of particle packing on gloss and ink jet print quality. Composite pigment structures

Different Types of Waste Melamine Impregnated Paper (MIP in Particleboard Manufacturing

Directory of Open Access Journals (Sweden)

Ibrahim Halil BASBOGA

2017-03-01

Full Text Available Two different types of waste melamine impregnated paper (WMIP were generated in the manufactured coated board product plants. First one is obtained when the neat décor papers were impregnated (in the impregnation line with melamine urea formaldehyde and other chemicals (WMIP1. The second one is generated during the coating of the melamine impregnated papers on the board surfaces (WMIP2. In this study, the utilization of both WMIPs in the production of particleboard as an adhesivereplacement was investigated. First, waste melamine impregnated papers (WMIPs granulated into flour form using Pulverizator with cooling capabilities. Then, they were dry-mixed with surface and core layer particles at 10% or 15% loadings. Three different WMIPs (WMIP1, WMIP2 or their mixtures - 70% WMIP1+30% WMIP2 were used as adhesive-replacement. Mechanical properties including bending strength, modulus of elasticity, internal bond strength and surface stability of the samples were determined according to EN 310, EN 319 and EN 317 standards, respectively. Based on the results, the type of WMIP had significant effect on all mechanical properties investigated. Particleboards produced with both 10% and 15% of WMIP1 loading provided adequate results for the related standards. The best result was obtained when 15% of WMIP1 was used. It is concluded that WMIP1 might be used as an adhesive-replacement in particleboard manufacturing and may provide economic and environmental benefits.

Vocational Education and Vocational Skills in Production

DEFF Research Database (Denmark)

Madsen, Erik Skov

2015-01-01

Through case studies in China, Mexico and Denmark, this paper identifies challenges posed to production companies by a lack of vocational skills and vocational education. The study includes manual, complex and automated production procedures. The paper highlights how both China and Denmark have...... focused on theoretical rather than vocational education for more than a decade. Based on a combination of a literature review and field studies of cases, including studies of mass production and unmanned and automated production, a framework of skills related to process tasks is developed. The paper...... concludes that much more focus on the development of vocational education and vocational skills is needed in Denmark, the U.K, the U.S. and in China for employees to be equipped to handle future automated and advanced production systems....

Fuel gas and char from pyrolysis of waste paper in a microwave plasma reactor

Energy Technology Data Exchange (ETDEWEB)

Khongkrapan, Parin; Thanompongchart, Patipat; Tippayawong, Nakorn; Kiatsiriroat, Tanongkiat [Department of Mechanical Engineering, Faculty of Engineering, Chiang Mai University, Chiang Mai 50200 (Thailand)

2013-07-01

In this study, a microwave plasma reactor was used for pyrolysis of waste papers. The effects of different argon flow rates on char and gas generation were investigated. Changes in carbon and oxygen contents from those in paper to char were significant. Char yield of over 25 % was obtained with the heating value of about 38 MJ/kg. Average gas yield and total content of combustible fraction (CO, CH4 and H2) in the gas product were 2.56 m3/kg and 36 %, respectively. The heating value of gas product and carbon conversion efficiency of the process were maximum at 6.0 MJ/m3 and 73 %, respectively.

Abstracts and Papers of the 2003 International RERTR Meeting

International Nuclear Information System (INIS)

2003-10-01

The papers presented at the 25th International Meeting on Reduced Enrichment for Research and Test Reactors (RERTR) were classified according to the following subjects: National programs covering shipment of HEU to countries of origin and national RERTR programs; Molybdenum 99 production by using LEU fuel; Development and fabrication of new type of LEU fuel elements; Reactor core conversion analysis; Safety, spent fuel and regulatory issues; spent fuel storage and management

A systems perspective on nursing productivity.

Science.gov (United States)

North, Nicola; Hughes, Frances

2012-01-01

Recent New Zealand reports have identified the nursing workforce for its potential to make a significant contribution to increased productivity in health services. The purpose of this paper is to review critically the recent and current labour approaches to improve nursing productivity in New Zealand, in a context of international research and experience. An examination of government documents regarding productivity, and a review of New Zealand and international literature and research on nursing productivity and its measurement form the basis of the paper. It is found that productivity improvement strategies are influenced by theories of labour economics and scientific management that conceptualise a nurse as a labour unit and a cost to the organisation. Nursing productivity rose significantly with the health reforms of the 1990s that reduced nursing input costs but impacts on patient safety and nurses were negative. Current approaches to increasing nursing productivity, including the "productive ward" and reconfiguration of nursing teams, also draw on manufacturing innovations. Emerging thinking considers productivity in the context of the work environment and changing professional roles, and proposes reconceptualising the nurse as an intellectual asset to knowledge-intensive health organisations. Strategies that take a systems approach to nursing productivity, that view nursing as a capital asset, that focus on the interface between nurse and working environment and measure patient and nurse outcomes are advocated. The paper shows that reframing nursing productivity brings into focus management strategies to raise productivity while protecting nursing and patient outcomes.

Feasibility of vermicomposting dewatered sludge from paper mills using Perionyx excavatus

Directory of Open Access Journals (Sweden)

Puspanjali Sonowal

2013-06-01

Full Text Available India has a large network of pulp and paper mills of varying capacity. On an industrial scale the sludge from paper and pulp mills is disposed of either as landfill or incinerated. Both methods result in the loss of a valuable resource and have obvious environmental and economic disadvantages. The solid waste from pulp and paper mills is a source of organic matter and its proper disposal and management is the responsibility of the industry. As composting/vermicomposting could be used to transform this waste trials were carried out to determine the feasibility of converting dewatered sludge (DS into a value added end product using an earthworm, Perionyx excavatus. The vermicomposting of the waste resulted in an increase in its electrical conductivity (EC, ash content, total nitrogen (TN, total phosphorous (TP and available phosphorous (AP, respectively, and a decrease in total organic carbon (TOC, biochemical oxygen demand (BOD, chemical oxygen demand (COD, oxygen uptake rate (OUR and evolution of carbon dioxide (CO2. Overall, the best treatment was T5 in which there was a 76.1% increase in TP, 58.7% in TN, 74.5% decrease in TOC , and a reduction of 6.7 fold in the production of CO2 and 10.7 fold in BOD, respectively. Our trials demonstrate that vermicomposting using an epigeic earthworm, Perionyx excavatus, is an alternate and environmentally safe way of recycling paper mill sludge if it is mixed with an appropriate amount of cow dung and food processing waste. Overall T5 was the best combination of paper mill sludge and waste for vermicomposting followed by T3, T2, T4 and T1, respectively.

Nondestructive quality evaluation technology of agricultural products

International Nuclear Information System (INIS)

Noh, Sang Ha

1997-01-01

Quality evaluation of agricultural products has been interested to many researchers for many years and as the result, several nondestructive techniques and so many papers have been reported for quality evaluation of agricultural products. These nondestructive techniques are based on the detection of mechanical, optical, electrical, electro-magnetical, dielectric and vibrational properties of agricultural products that are well correlated with certain quality factors of the products such as color, shape, firmness, sugar content, external or internal defects, moisture content, etc. The sophistication of nondestructive methods has evolved rapidly with modem technologies. In this paper an emphasis was put on reviewing some of those papers and techniques which could be led to on-line measurement for practical use.

Laminated and infused Parafilm® - paper for paper-based analytical devices.

Science.gov (United States)

Kim, Yong Shin; Yang, Yuanyuan; Henry, Charles S

2018-02-01

Numerous fabrication methods have been reported for microfluidic paper-based analytical devices (μPADs) using barrier materials ranging from photoresist to wax. While these methods have been used with wide success, consistently producing small, high-resolution features using materials and methods that are compatible with solvents and surfactants remains a challenge. Two new methods are presented here for generating μPADs with well-defined, high-resolution structures compatible with solvents and surfactant-containing solutions by partially or fully fusing paper with Parafilm® followed by cutting with a CO 2 laser cutter. Partial fusion leads to laminated paper ( l -paper) while the complete fusion results in infused paper ( i -paper). Patterned structures in l -paper were fabricated by selective removal of the paper but not the underlying Parafilm® using a benchtop CO 2 laser. Under optimized conditions, a gap as small as 137 ± 22 μm could be generated. Using this approach, a miniaturized paper 384-zone plate, consisting of circular detection elements with a diameter of 1.86 mm, was fabricated in 64 × 43 mm 2 area. Furthermore, these ablation-patterned substrates were confirmed to be compatible with surfactant solutions and common organic solvents (methanol, acetonitrile and dimethylformamide), which has been achieved by very few μPAD patterning techniques. Patterns in i -paper were created by completely cutting out zones of the i -paper and then fixing pre-cut paper into these openings similar to the strategy of fitting a jigsaw piece into a puzzle. Upon heating, unmodified paper was readily sealed into these openings due to partial reflow of the paraffin into the paper. This unique and simple bonding method was illustrated by two types of 3D μPADs, a push-on valve and a time-gated flow distributor, without adding adhesive layers. The free-standing jigsaw-patterned sheets showed good structural stability and solution compatibility, which provided a facile

Paper Cuts.

Science.gov (United States)

Greene, Lisa A.

1990-01-01

Describes how to create paper cuts and suggests the most appropriate materials for young children that give good quality results. Describes the methods the author, a professional artist, uses to assemble her own paper cuts and how these can be adopted by older students. (KM)

Personnel as a Factor of Production in Development of Regional Tourism Economy – a Conceptual Paper

Directory of Open Access Journals (Sweden)

Aleksander Panasiuk

2013-01-01

Full Text Available Tourism economy appears in every sphere of economy: production of goods and services, their division, exchange and consumption; it also occurs in the majority of the national economy branches that directly or indirectly deal with meeting tourist demand. The majority of economic processes in tourism sector are realized by direct tourism economy and its representatives, tourist entrepreneurs. Territorial self- government units and tourist organizations play a significant role in formation of economic processes in tourism sector on the regional and local levels. The classic economy distinguishes three basic production factors: labor, land and capital. In the modern approaches they are completed with the fourth that has different names. Beginning with technical and organizational progress which is a logic extension of coexistence and cooperation of three basic factors, ending with information and knowledge – treated as the most modern factors of production in the so-called new economy. In the totality of activities of tourism economy entities, a special role should be ascribed to the personnel, namely human potential of tourism economy entities.

Game analysis of product-service integration

Directory of Open Access Journals (Sweden)

Heping Zhong

2014-10-01

Full Text Available Purpose: This paper aims at defining the value creation mechanism and income distribution strategies of product-service integration in order to promote product-service integration of a firm.Design/methodology/approach: This paper conducts researches quantitatively on the coordination mechanism of product-service integration by using game theory, and uses the methods of Shapley value and Equal growth rate to further discuss income distribution strategies of product-service integration.Findings: Product-service integration increases the total income of a firm and the added value of the income decreases as the unit price demand variation coefficient of products and services increases, while decreases as the marginal cost of products increases, decreases as the marginal cost of services increases. Moreover, the findings suggest that both income distribution strategies of product-service integration based on Shapley value method and Equal growth rate method can make the product department and service department of a firm win-win and realize the pareto improvement. The choice of what kind of distribution strategy to coordinate the actions between departments depends on the department playing dominant role in the firm. Generally speaking, for a firm at the center of market, when the product department is the main contributor to firm income, the service department will choose the income distribution strategy of product-service integration based on Shapley value method; when the service department is the main contributor to firm income, the service department will choose the income distribution strategy of product-service integration based on Equal growth rate method.Research limitations/implications: This paper makes some strict assumptions such as complete information, risk neutral, linear cost function and so on and the discussion is limited to the simple relationship between product department and service department.Practical implications: Product

Overview of design issues in product-integrated Photovoltaics

NARCIS (Netherlands)

Apostolou, G.; Reinders, Angelina H.M.E.

2014-01-01

This paper presents an overview of the design features and characteristics of photovoltaic (PV)-powered products based on a literature study on product-integrated PV and an analysis of 90 PV-powered products executed during 2011–2013. The aim of this paper is to provide insight into the current

Operating experience at Heavy Water Plant, Tuticorin (Paper No. 1.7)

International Nuclear Information System (INIS)

Periakaruppan, M.; Arumugam, G.; Ayyanar, P.

1992-01-01

The initial hurdles faced in the operation of the Heavy Water Plant at Tuticorin warranted major changes in certain design concepts. This paper highlights few of the modifications carried out such as in product concentration, catalyst concentration, amide entry to extraction tower and fluid distribution in cracker tubes. (author)

Paper-Based Origami Flexible and Foldable Thermoelectric Nanogenerator

KAUST Repository

Rojas, Jhonathan Prieto; Conchouso Gonzalez, David; Carreno, Armando Arpys Arevalo; Singh, Devendra; Foulds, Ian G.; Hussain, Muhammad Mustafa

2016-01-01

Paper has been an essential material in our daily life since ancient times. Its affordability, accessibility, adaptability, workability and its easiness of usage makes it an attractive structural material to develop many kind of technologies such as flexible electronics, energy storage and harvesting devices. Additionally, the scientific community has increased its interest on waste heat as an environmentally friendly energy source to support the increasing energy demand. Therefore, in this paper we described two affordable and flexible thermoelectric nanogenerators (TEGs) developed on paper substrates by the usage of simple micromachining and microfabrication techniques. Moreover, they exhibit mechanical stability and adaptability (through folding and cutting techniques) for a diverse set of scenarios where vertical or horizontal schemes can be conveniently used depending on the final application. The first TEG device, implemented on standard paper, generated a power of 0.5 nW (ΔT = 50 K). By changing the substrate to a tearless and extra-smooth polyester paper, the TEG performance was optimized achieving less internal resistance and a greater power of ~80 nW (ΔT = 75 K), at the cost of more rigidity in the substrate. This power represented over three times higher power production than the standard paper–based TEG with same dimensions, number of thermoelectric pairs and temperature difference. Another interesting aspect of paper based TEG is due to its foldability, one can control the temperature difference by unfolding (larger separation between hot and cold ends) and folding (smaller separation). Finally, one of the underlying objectives of this work is to spread the availability of essential technologies to the broad population by inclusion of everyday materials and simple processes.

Paper-Based Origami Flexible and Foldable Thermoelectric Nanogenerator

KAUST Repository

Rojas, Jhonathan Prieto

2016-11-12

Paper has been an essential material in our daily life since ancient times. Its affordability, accessibility, adaptability, workability and its easiness of usage makes it an attractive structural material to develop many kind of technologies such as flexible electronics, energy storage and harvesting devices. Additionally, the scientific community has increased its interest on waste heat as an environmentally friendly energy source to support the increasing energy demand. Therefore, in this paper we described two affordable and flexible thermoelectric nanogenerators (TEGs) developed on paper substrates by the usage of simple micromachining and microfabrication techniques. Moreover, they exhibit mechanical stability and adaptability (through folding and cutting techniques) for a diverse set of scenarios where vertical or horizontal schemes can be conveniently used depending on the final application. The first TEG device, implemented on standard paper, generated a power of 0.5 nW (ΔT = 50 K). By changing the substrate to a tearless and extra-smooth polyester paper, the TEG performance was optimized achieving less internal resistance and a greater power of ~80 nW (ΔT = 75 K), at the cost of more rigidity in the substrate. This power represented over three times higher power production than the standard paper–based TEG with same dimensions, number of thermoelectric pairs and temperature difference. Another interesting aspect of paper based TEG is due to its foldability, one can control the temperature difference by unfolding (larger separation between hot and cold ends) and folding (smaller separation). Finally, one of the underlying objectives of this work is to spread the availability of essential technologies to the broad population by inclusion of everyday materials and simple processes.

Product design engineering - a global education trend in multidisciplinary training for creative product design

Science.gov (United States)

de Vere, Ian; Melles, Gavin; Kapoor, Ajay

2010-03-01

Product design is the convergence point for engineering and design thinking and practices. Until recently, product design has been taught either as a component of mechanical engineering or as a subject within design schools but increasingly there is global recognition of the need for greater synergies between industrial design and engineering training. Product design engineering (PDE) is a new interdisciplinary programme combining the strengths of the industrial design and engineering. This paper examines the emergence of PDE in an environment of critique of conventional engineering education and exemplifies the current spread of programmes endorsing a hybrid programme of design and engineering skills. The paper exemplifies PDE with the analysis of the programme offered at Swinburne University of Technology (Australia), showing how the teaching of 'designerly' thinking to engineers produces a new graduate particularly suited to the current and future environment of produce design practice. The paper concludes with reflections on the significance of this innovative curriculum model for the field of product design and for engineering design in general.

Free-standing and flexible graphene papers as disposable non-enzymatic electrochemical sensors

DEFF Research Database (Denmark)

Zhang, Minwei; Halder, Arnab; Hou, Chengyi

2016-01-01

) disclosed AuNPs coated uniformly by a 5 nm thick PB layer. Au@PB NPs were attached to single-layer graphene oxide (GO) to form Au@PB decorated GO sheets. The resulting hybrid material was filtered layer-by-layer into flexible and freestanding GO paper, which was further converted into conductive reduced GO...... (RGO)/Au@PB paper via hydrazine vapour reduction. High-resolution TEM images suggested that RGO papers are multiply sandwich-like structures functionalized with core-shell NPs. Resulting sandwich functionalized graphene papers have high conductivity, sufficient flexibility, and robust mechanical...... response range (1-30 μM), the detection limit (100 nM), and the high amperometric sensitivity (5 A cm-2 M-1). With the advantages of low cost and scalable production capacity, such graphene supported functional papers are of particular interest in the use as flexible disposable sensors....

On the Distribution of Worker Productivity: The Case for Teacher Effectiveness and Student Achievement. CEDR Working Paper. WP #2016-10

Science.gov (United States)

Goldhaber, Dan; Startz, Richard

2016-01-01

It is common to assume that worker productivity is normally distributed, but this assumption is rarely if ever tested. We estimate the distribution of worker productivity where individual productivity is measured with error, using the productivity of elementary school teachers as an example. Proposals to improve teacher productivity often focus on…

Estimating productivity with multi-product firms, pricing heterogeneity and the role of international trade

DEFF Research Database (Denmark)

Smeets, Valerie Anne Rolande; Warzynski, Frederic Michel Patrick

In this paper, we analyze the relationship between exports, imports and firm productivity. We use a rich product-firm-level dataset providing both revenue and quantities of all products for a large panel of Danish manufacturing firms over the period 1998-2008 and link it to firms’ international...

STATEMENT OF THE OPTIMIZATION PROBLEM OF CARBON PRODUCTS PRODUCTION

Directory of Open Access Journals (Sweden)

O. A. Zhuchenko

2016-08-01

Full Text Available The paper formulated optimization problem formulation production of carbon products. The analysis of technical and economic parameters that can be used to optimize the production of carbonaceous products had been done by the author. To evaluate the efficiency of the energy-intensive production uses several technical and economic indicators. In particular, the specific cost, productivity, income and profitability of production. Based on a detailed analysis had been formulated optimality criterion that takes into account the technological components of profitability. The components in detail the criteria and the proposed method of calculating non-trivial, one of them - the production cost of each product. When solving the optimization problem of technological modes of production into account constraints on the variables are optimized. Thus, restrictions may be expressed on the number of each product produced. Have been formulated the method of calculating the cost per unit of product. Attention is paid to the quality indices of finished products as an additional constraint in the optimization problem. As a result have been formulated the general problem of optimizing the production of carbon products, which includes the optimality criterion and restrictions.

Inhibition of various gram-positive and gram-negative bacteria growth on selenium nanoparticle coated paper towels.

Science.gov (United States)

Wang, Qi; Larese-Casanova, Philip; Webster, Thomas J

2015-01-01

There are wide spread bacterial contamination issues on various paper products, such as paper towels hanging in sink splash zones or those used to clean surfaces, filter papers used in water and air purifying systems, and wrappings used in the food industry; such contamination may lead to the potential spread of bacteria and consequent severe health concerns. In this study, selenium nanoparticles were coated on normal paper towel surfaces through a quick precipitation method, introducing antibacterial properties to the paper towels in a healthy way. Their effectiveness at preventing biofilm formation was tested in bacterial assays involving Staphylococcus aureus, Pseudomonas aeruginosa, Escherichia coli, and Staphylococcus epidermidis. The results showed significant and continuous bacteria inhibition with about a 90% reduction from 24 to 72 hours for gram-positive bacteria including S. aureus and S. epidermidis. The selenium coated paper towels also showed significant inhibition of gram-negative bacteria like P. aeruginosa and E. coli growth at about 57% and 84%, respectively, after 72 hours of treatment. Therefore, this study established a promising selenium-based antibacterial strategy to prevent bacterial growth on paper products, which may lead to the avoidance of bacteria spreading and consequent severe health concerns.

Review on progressive microforming of bulk metal parts directly using sheet metals (Keynote Paper

Directory of Open Access Journals (Sweden)

Fu M.W.

2015-01-01

Full Text Available Due to the ubiquitous trend of product miniaturization, energy saving and weight reduction, micro/meso-scale parts have been widely used in many industrial clusters. Micromanufacturing processes for production of such micro/meso-scale parts are thus critically needed. Microforming, as one of these micro manufacturing processes, is a promising process and thus got many explorations and researches. Compared with the research on size effect affected deformation behaviours, less attention has been paid to the process development for mass production of micro-parts. The product quality and fabrication productivity of micro-parts depend on the involved process chain. To address the difficulty in handling and transporting of the micro-sized workpiece, development of a progressive microforming process for directly fabricating bulk micro-parts using sheet metals seems quite promising as it avoids or facilitates billet handling, transportation, positioning, and ejection in the process chain. In this paper, an intensive review on the latest development of progressive microforming technologies is presented. First of all, the paper summarizes the characteristic of progressive microforming directly using sheet metal. The size effect-affected deformation behaviour and the dimensional accuracy, deformation load, ductile fracture, and the surface finish of the microformed parts by progressive microforming using sheet metals are then presented. Finally, some research issues from the implementation of mass production perspective are also discussed.

Natural Connections on Riemannian Product Manifolds

OpenAIRE

Gribacheva, Dobrinka

2011-01-01

A Riemannian almost product manifold with integrable almost product structure is called a Riemannian product manifold. In the present paper the natural connections on such manifolds are studied, i.e. the linear connections preserving the almost product structure and the Riemannian metric.

Understanding Project Based Production through Socio-technical Modularity

DEFF Research Database (Denmark)

Thuesen, Christian Langhoff

This paper develops an approach for understanding Project Based Production. This form of production is characterized by unique deliverables, high complexity, high value, high risk, profound uncertainty and many stakeholders and is increasingly important the postmodern society. Common to the pract......This paper develops an approach for understanding Project Based Production. This form of production is characterized by unique deliverables, high complexity, high value, high risk, profound uncertainty and many stakeholders and is increasingly important the postmodern society. Common...... to the practices of PBP and other production practices is the goal of balancing the dilemma between creativity and productivity. In response to industrialized production, the concept of modularity gained popularity for addressing this dilemma by exploring product, process and organization structures. However...... with the starting point in system theory and a strong bias towards industrial production, the predominant understanding of modularity faces difficulty in explaining practices of Project Based Production in both social – technical and dynamic – stable aspects. Illustrated by a case the paper addresses this gap...

Information Sharing In Shipbuilding based on the Product State Model

DEFF Research Database (Denmark)

Larsen, Michael Holm

1999-01-01

The paper provides a review of product modelling technologies and the overall architecture for the Product State Model (PSM) environment as a basis for how dynamically updated product data can improve control of production activities. Especially, the paper focuses on the circumstances prevailing...

Durable superhydrophobic paper enabled by surface sizing of starch-based composite films

Science.gov (United States)

Chen, Gang; Zhu, Penghui; Kuang, Yudi; Liu, Yu; Lin, Donghan; Peng, Congxing; Wen, Zhicheng; Fang, Zhiqiang

2017-07-01

Superhydrophobic paper with remarkable durability is of considerable interest for its practical applications. In this study, a scalable, inexpensive, and universal surface sizing technique was implemented to prepare superhydrophobic paper with enhanced durability. A thin layer of starch-based composite, acting as a bio-binder, was first coated onto the paper surface by a sophisticated manufacturing technique called surface sizing, immediately followed by a spray coating of hexamethyl disilazane treated silica nanoparticles (HMDS-SiNPs) dispersed in ethanol on the surface of the wet starch-coated sheet, and the dual layers dried at the same time. Consequently, durable superhydrophobic paper with bi-layer structure was obtained after air drying. The as-prepared superhydrophobic paper not only exhibited a self-cleaning behavior, but also presented an enhanced durability against scratching, bending/deformation, as well as moisture. The universal surface sizing of starch-based composites may pave the way for the up-scaled and cost-effective production of durable superhydrophobic paper.

Integrating the processes of a Kraft pulp and paper mill and its supply chain

International Nuclear Information System (INIS)

Mesfun, Sennai; Toffolo, Andrea

2015-01-01

Highlights: • A process integration model that establishes material stream connections among typical Nordic forest industries is developed. • Potential benefit of the operating the different industries in one site is studied using pinch analysis. • Different scenarios considered to assess impact of prioritization on how to utilize excess biomass. • Results indicate large potential for improved biomass resource utilization. - Abstract: This paper investigates the possibility of combining different forest industries (a pulp and paper mill, its supply chain, and a wood-pellet plant) into an integrated industrial site in which they share a common heat and power utility. Advanced process integration and optimization techniques are used to study the site from both material and energy viewpoints. An existing pulp and paper mill is used as the site core plant and its pulp and paper production rates are kept fixed as they are in reality, while the other material flow links among the plants are based on the current industrial situation in Sweden. Different scenarios are evaluated in order to reflect the two main objectives that can be pursued (increased electricity production or biomass resource saving) and the two technologies that can be considered for the shared CHP system (boilers and product gas fired gas turbines). The corresponding non-integrated (standalone) configurations are compared to these scenarios to quantify the potential benefits of the integration. Investment opportunity is also calculated for the considered scenarios as an indicator of the economic convenience

Productive Gaming

OpenAIRE

Brandstätter , Ulrich; Sommerer , Christa

2016-01-01

Part 4: Short Papers; International audience; Video games can be appropriated for productive purposes. Commercial games and game engines are often used for video productions, and game development companies provide development kits and modding environments to gaming communities and independent developers. With gamification, game principles are deployed in non-game contexts for benefits beyond pure entertainment. Most approaches are more focused on using games and their design elements rather t...

Which Academic Papers Do Researchers Tend to Feature on ResearchGate?

Science.gov (United States)

Liu, Xuan Zhen; Fang, Hui

2018-01-01

Introduction: The academic social network site ResearchGate (www.researchgate.net) enables researchers to feature up to five of their research products (including papers, datasets and chapters) in a 'Featured research' section on their ResearchGate home page. This provides an opportunity to discover how researchers view their own publications.…

Product (RED)

DEFF Research Database (Denmark)

Ponte, Stefano

2011-01-01

) and the consumers who buy iconic brand products to help ‘distant others’. While in many other forms of causumerism, labels or certification systems ‘prove’ that a product is just, in RED, aid celebrities provide the proof. From the consumer point of view both labels and celebrities provide a similar simplification...... of complex social, economic, and environmental processes. At the same time, we argue that there are important distinctions as well—labels and certifications are ultimately about improving the conditions of production, whereas RED is about accepting existing production and trade systems and donating......(PRODUCT)RED™ (hereafter RED) is a cobranding initiative launched in 2006 by the aid celebrity Bono to raise money from product sales to support The Global Fund to Fight AIDS, Tuberculosis and Malaria. In this paper we argue that RED is shifting the boundaries of ‘causumerism’ (shopping...

Increasing number of authors per paper in Korean science and technology papers

Directory of Open Access Journals (Sweden)

Hyunju Jang

2016-08-01

Full Text Available We examined changes in the number of authors per paper for science and technology papers (agricultural sciences, engineering and technologies, medical sciences, and natural sciences in Korea. We employed the Scopus database to examine the change in the number of authors in papers, which were published from 2000 to 2015 in the 234 Korean academic journals indexed on Scopus. We found that the global trend of growth in the number of authors per paper is evident in Korea as well. While there was little evidence of a correlation with the citation per paper, a positive correlation was found between with the field-weighted citation impact, another measure of a paper’s impact, in medical and natural science papers. In terms of the type of collaboration, we found that international collaboration papers had the highest number of authors, followed by national and institutional collaborations. The number of authors per paper was highest for those published in the top 10% journals by Source Normalized Impact per Paper, followed by Scopus-indexed journals, while papers published in Korea Citation Index had the lowest number of authors per paper. We propose that the rise in the number of authors per paper in Korean papers may be ascribed to many Korean research programs encouraging group research and the widespread availability of the internet, which has stimulated joint research efforts and encouraged international collaboration.

The Perception of Aquaponics Products in Romania

Directory of Open Access Journals (Sweden)

Adrian Gheorghe Zugravu

2016-07-01

Full Text Available The paper follows two main objectives: to understand consumers' perception and image of aquaponics products and to identify levers communication in order to improve the perceived image of aquaponics products. Orientations in terms of communication aims product-focused and aim at enhancing the reputation of products, consequently with impact on product consumption. The present research is focused on the aquaponics products, regardless of their presentation - fresh, frozen or processed. This paper conducted a questionnaire survey of Romanian consumers' perception of aquaponics products. The empirical study for aquaponics products indicated box that consumers shown different awareness to domestic and foreign aquaponics products. Aquaponics national products got more attention from the consumers. Foreign aquaponics products had insightful higher price, but Romanian aquaponics products acquired insightful higher value, and got a better rank in the preference list and in the purchase intention of the consumers.

Production-logistic system in the aspect of strategies for production planning and control and for logistic customer service

OpenAIRE

Łukasz Hadaś; Agnieszka Stachowiak; Piotr Cyplik

2014-01-01

Background: The authors made multi-dimensional review of production and logistic strategies in order to prove their coherence in shaping internal and external supply chain. The paper is concluded with definition of production-logistic system as an object of modeling in transformation of business systems of manufacturing companies. Material and methods: The paper is based on analysis of state of the art presented in the literature on the subject of production and logistics strategies. Publ...

Development of a framework for sustainable uses of resources: more paper and less plastics?

Science.gov (United States)

Chen, Chung-Chiang

2006-05-01

Taiwan's EPA has implemented a new guideline called the "Plastic Products Restriction Policy", prohibiting some industries to use plastics as packaging materials for the sake of sustainable use of resources. The significant effect resulting from this policy is the substitution of plastic products with paper products. Is this policy beneficial to achieve future sustainability? I attempt to analyze the resource choice between renewable resources and exhaustible resources for production of final products and services in case of exhaustion of natural resources. In this paper, I develop a framework to examine the dynamic responsiveness of a socio-economical system in facing a continual depletion of natural resources provided by an environmental system. In this framework, the status of an environmental system in terms of carrying capacity is affected by the cumulative impacts caused from human activities, including environmental pollution and resource exploitation. Conversely, it also affects the growth of renewable resources. This framework can serve as a guideline to construct indicators to measure the status of the environmental system and the socio-economical system in order to support a policy planner that formulates an appropriate environmental policy. Based on this framework, I also develop a mathematical model to determine the optimal ratio of resources choice between renewable resources and exhaustible resources.

New Manufacturing Method for Paper Filler and Fiber Material

Energy Technology Data Exchange (ETDEWEB)

Doelle, Klaus [SUNY College of Environmental Science and Forestry

2013-08-25

The use of fillers in printing and writing papers has become a prerequisite for competing in a global market to reduce the cost of materials. Use of calcium carbonates (ranging from 18% to 30%) as filler is a common practice in the paper industry but the choices of fillers for each type of papers vary widely according to its use. The market for uncoated digital printing paper is one that continues to introduce exciting growth projections. and it is important to understand the effect that new manufacturing methods of calcium carbonates have on the energy efficiency and paper production. Research conducted under this award showed that the new fiber filler composite material has the potential to increase the paper filler content by up to 5% without losing mechanical properties. Benefits of the technology can be summarized as follows for a 1% filler increase per metric ton of paper produced: (i) production cost savings over $12, (ii) Energy savings of 100,900 btu, (iii) CO{sub 2} emission savings of 33 lbs, and additional savings for wood preparation, pulping, recovery of 203593 btu with a 46lbs of CO{sub 2} emission savings per 1% filler increase. In addition the technology has the potential to save: (i) additional $3 per ton of bleached pulp produced, (ii) bleaching energy savings of 170,000 btu, (iii) bleaching CO{sub 2} emission savings of 39 lbs, and (iv) additional savings for replacing conventional bleaching chemicals with a sustainable bleaching chemical is estimated to be 900,000 btu with a 205 lbs of CO{sub 2} emission savings per ton of bleached pulp produced. All the above translates to a estimated annual savings for a 12% filler increase of 296 trillion buts or 51 million barrel of oil equivalent (BOE) or 13.7% of the industries energy demand. This can lead to a increase of renewable energy usage from 56% to close to 70% for the industry sector. CO{sub 2} emission of the industry at a 12% filler increase could be lowered by over 39 million tons annually

Removal of xenotropic murine leukemia virus by nanocellulose based filter paper.

Science.gov (United States)

Asper, M; Hanrieder, T; Quellmalz, A; Mihranyan, A

2015-11-01

The removal of xenotrpic murine leukemia virus (xMuLV) by size-exclusion filter paper composed of 100% naturally derived cellulose was validated. The filter paper was produced using cellulose nanofibers derived from Cladophora sp. algae. The filter paper was characterized using atomic force microscopy, scanning electron microscopy, helium pycnometry, and model tracer (100 nm latex beads and 50 nm gold nanoparticles) retention tests. Following the filtration of xMuLV spiked solutions, LRV ≥5.25 log10 TCID50 was observed, as limited by the virus titre in the feed solution and sensitivity of the tissue infectivity test. The results of the validation study suggest that the nanocellulose filter paper is useful for removal of endogenous rodent retroviruses and retrovirus-like particles during the production of recombinant proteins. Copyright © 2015 The International Alliance for Biological Standardization. Published by Elsevier Ltd. All rights reserved.

GGDC Productivity Level Database : International Comparisons of Output, Inputs and Productivity at the Industry Level

NARCIS (Netherlands)

Inklaar, Robert; Timmer, Marcel P.

2008-01-01

In this paper we introduce the GGDC Productivity Level database. This database provides comparisons of output, inputs and productivity at a detailed industry level for a set of thirty OECD countries. It complements the EU KLEMS growth and productivity accounts by providing comparative levels and

Estimating shadow prices and efficiency analysis of productive inputs and pesticide use of vegetable production

NARCIS (Netherlands)

Singbo, Alphonse G.; Lansink, Alfons Oude; Emvalomatis, Grigorios

2015-01-01

This paper analyzes technical efficiency and the value of the marginal product of productive inputs vis-a-vis pesticide use to measure allocative efficiency of pesticide use along productive inputs. We employ the data envelopment analysis framework and marginal cost techniques to estimate

Laffer Curves and Home Production

Directory of Open Access Journals (Sweden)

Kotamäki Mauri

2017-06-01

Full Text Available In the earlier related literature, consumption tax rate Laffer curve is found to be strictly increasing (see Trabandt and Uhlig (2011. In this paper, a general equilibrium macro model is augmented by introducing a substitute for private consumption in the form of home production. The introduction of home production brings about an additional margin of adjustment – an increase in consumption tax rate not only decreases labor supply and reduces the consumption tax base but also allows a substitution of market goods with home-produced goods. The main objective of this paper is to show that, after the introduction of home production, the consumption tax Laffer curve exhibits an inverse U-shape. Also the income tax Laffer curves are significantly altered. The result shown in this paper casts doubt on some of the earlier results in the literature.

Industrial production of RHIC magnets

International Nuclear Information System (INIS)

Anerella, M.D.; Fisher, D.H.; Sheedy, E.; McGuire, T.

1996-01-01

RHIC 8 cm aperture dipole magnets and quadrupole cold masses are being built for Brookhaven National Laboratory (BNL) by Northrop Grumman Corporation at a production rate of one dipole magnet and two quadrupole cold masses per day. This work was preceded by a lengthy Technology Transfer effort which is described elsewhere. This paper describes the tooling which is being used for the construction effort, the production operations at each workstation, and also the use of trend plots of critical construction parameters as a tool for monitoring performance in production. A report on the improvements to production labor since the start of the programs is also provided. The magnet and cold mass designs, and magnetic test results are described in more detail in a separate paper

Genetically Modified Products – Contradictions and Challenges

OpenAIRE

Rodica Pamfilie; Lavinia-Alexandra Cristescu

2011-01-01

This paper aims to identify the perception that consumers have about GM products, also taking into consideration the evolution of consumption and production of products based on genetically modified organisms. Therefore, the paper presents both aspects to clarify the concept of genetically modified organism (GMO issues such as typology, national or international regulations regarding this area) and global market development of genetically modified organisms, evolution which is presented by st...

Original Paper Production et qualité nutritionnelle des épis de maïs ...

African Journals Online (AJOL)

(richesse en amidon, présence de protéines, bonne matière grasse) et économiques (culture facile et peu coûteuse) qu'il offre (Adégbola et al., 2011). La production nationale de maïs a été estimée en 2012 à 1175 000 tonnes au. Bénin (FAO, 2013). Le niveau moyen de consommation de maïs est estimé à plus de 85.

Second Thoughts on Exporter Productivity

DEFF Research Database (Denmark)

Sørensen, Allan; Schröder, Philipp J.H.

Empirical literature has established a positive link between firm productivity and export status, yet notable exceptions exist. The present paper shows that the underlying theory (Melitz, 2003) is in fact able to accommodate the rule as well as the exception. The fulcrum of the argument is the te......Empirical literature has established a positive link between firm productivity and export status, yet notable exceptions exist. The present paper shows that the underlying theory (Melitz, 2003) is in fact able to accommodate the rule as well as the exception. The fulcrum of the argument...... is the tension between empirical work measuring productivity based on average cost information, and theoretical work representing productivity by marginal cost. In a heterogeneous firms trade model, we compute productivity based on average cost and find that around the export-indifferent firm, exporters...... will be less productive than non-exporters. Furthermore, we show that this effect may feed through at the industry level....

Multi-directional productivity change

DEFF Research Database (Denmark)

Asmild, Mette; Balezentis, Tomas; Hougaard, Jens Leth

2016-01-01

In this paper we introduce an extension of the Malmquist total factor productivity index, which utilizes the Multi-directional Efficiency Analysis approach. This enables variable-specific analysis of productivity change as well as its components (efficiency change and technical change). The new...

Paper Punch Tape

CERN Multimedia

Physicists coded and recorded their programs through series of holes on punch paper tape or on punched cards. It was popular in the 1970s due to its high throughput speed and low cost, paper tape was one of the original data storage methods for computers. Information was encoded in the distinct pattern of holes punched in the paper; the paper itself was oiled to facilitate being run through the reading mechanism and to prevent tears due to brittleness. Though the paper was cheap, it had low storage capacity (only a few dozen kilobytes per roll) and the machinery involved in punching the holes was quite expensive. Higher capacity alternatives, such as magnetic tape, has get developped.

Risk Of Loss Of Productivity In Workplaces

Directory of Open Access Journals (Sweden)

Wafi Assiri

2015-08-01

Full Text Available In every organization there exist some unavoidable cost when running any business. However these costs can be minimized by managing the factors that contribute to increased business cost and finding ways to prevent risks before they occur. This paper examines one of these factors which is loss of productivity in the workplace. The paper examines the risks of loss of productivity what causes these risks and in what ways will the business be affected by them. This paper also present the various ways a business can manage the risks by providing ways on how the business can prepare for any incidents with regards to the risks. And because its impossible to manage anything that you cant measure ways in which productivity can be measured have been addressed. Finally the paper addresses ways in which the business can improve its workplace productivity to achieve the business goals and ensure continuity of the business.

SIMULATION AS AN APPROPRIATE WAY OF VERIFYING THE EFFICIENCY OF PRODUCTION VARIANTS IN THE DESIGN OF PRODUCTION AND NON-PRODUCTION SYSTEMS

Directory of Open Access Journals (Sweden)

Marek Kliment

2014-12-01

Full Text Available The paper deals with simulation and her forms of use in designing of production and non-production systems. Points to the possibility of using software can help in planning and subsequently in other phase of the lifecycle production and products. Article informs about some of the advantages of this type of software and his options. Sets out some theoretical knowledge of simulation and in the practical part presents some frequently used simulation software.

Impact of Machine Breakdowns on Productivity

Directory of Open Access Journals (Sweden)

Anwaruddin Tanwari

2011-10-01

Full Text Available This paper reports the machine breakdowns and their impact on the total productivity for the FMCGs (Fast Moving Consumer Goods industry because higher productivity rate is important factor on which the customer services largely depend in this competitive business world. This paper also suggests that the machine breakdowns and other related problems within the plant are due to improper care, keeping the plant operative for twenty four hours a day, seven days a week without any break and lack of management\\'s concentration towards these issues. These break-downs results in un-timely closure of the plant and very poor production performance is achieved in the plant that affects the service level at great level. Realising the importance of maintenance in improving productivity and service, an attempt has been made in this paper to study the scope of maintenance with the help of a case study.

The usage of mendong waste as the basic material of art paper

International Nuclear Information System (INIS)

Kuntari

2010-01-01

The waste of mendong craft industry consist of natural and colored mendong that contains of cellulose, hemicellulose, lignin, pectin and wax. These substances can be use to make art paper. Craft products that produce from art paper or the art papers it self have a good prospect for export. In this research, the preparation of pulp and art paper from this waste using NaOH soaking variation of 10 % and 20 % at 3 hours, 6 hours, 9 hours, 12 hours, and 24 hours with 1 % weight of tapioca as strengthener. The resulting pulp were tested of its alpha cellulose, hemi cellulose and extractive contain. The art papers were tested of its grammage, tearing strength, tensile strength, bursting strength, folding recovery, porosity, roughness and water absorbance Cobb60 test. As a result, the thinnest art paper is produced from pulping process of 20 % NaOH soaking at 3 hours and 15 minutes blending, while the thickest art paper is produced from pulping process of 10 % NaOH soaking for 3 hours and 30 minutes blending. (author)

Bioconversion of waste office paper to hydrogen using pretreated rumen fluid inoculum.

Science.gov (United States)

Botta, Lívia Silva; Ratti, Regiane Priscila; Sakamoto, Isabel Kimiko; Ramos, Lucas Rodrigues; Silva, Edson Luiz; Varesche, Maria Bernadete Amâncio

2016-12-01

In this study, a microbial consortium from an acid-treated rumen fluid was used to improve the yields of H 2 production from paper residues in batch reactors. The anaerobic batch reactors, which contained paper and cellulose, were operated under three conditions: (1) 0.5 g paper/L, (2) 2 g paper/L, and (3) 4 g paper/L. Cellulase was added to promote the hydrolysis of paper to soluble sugars. The H 2 yields were 5.51, 4.65, and 3.96 mmol H 2 /g COD, respectively, with substrate degradation ranging from 56 to 65.4 %. Butyric acid was the primary soluble metabolite in the three reactors, but pronounced solventogenesis was detected in the reactors incubated with increased paper concentrations (2.0 and 4.0 g/L). A substantial prevalence of Clostridium acetobutylicum (99 % similarity) was observed in the acid-treated rumen fluid, which has been recognized as an efficient H 2 -producing strain in addition to ethanol and n-butanol which were also detected in the reactors.

76 FR 19043 - Certain Tissue Paper Products From the People's Republic of China: Preliminary Affirmative...

Science.gov (United States)

2011-04-06

... Guiding the Implementation of a Number of Articles of the Accounting Law, Applicable to Business... Response that it could conclusively demonstrate through its accounting and production records that it did... accounting records for calendar year 2008. Specifically, MFVN did not support its claim that it had ceased...

Inkjet Printing of Paper-Based Wideband and High Gain Antennas

KAUST Repository

Cook, Benjamin

2011-12-07

This thesis represents a major contribution to wideband and high gain inkjet-printed antennas on paper. This work includes the complete characterization of the inkjet printing process for passive microwave devices on paper substrate as well as several ultra-wideband and high gain antenna designs. The characterization work includes the electrical characterization of the permittivity and loss tangent for paper substrate through 10 GHz, ink conductivity data for variable sintering conditions, and minimum feature sizes obtainable by today’s current inkjet processes for metallic nanoparticles. For the first time ever, inkjet-printed antennas are demonstrated that operate over the entire UWB band and demonstrate gains up to 8dB. This work also presents the first fractal-based inkjet-printed antennas with enhanced bandwidth and reduced production costs, and a novel slow wave log periodic dipole array which shows minimizations of 20% in width over conventional log periodic antennas.

TAXATION SYSTEM AT INTRA PRODUCTION LEVEL

Directory of Open Access Journals (Sweden)

L. I. Podderegina

2006-01-01

Full Text Available The paper presents results of the analysis concerning taxation in the country at the level of an enteфrise and its structural sub-divisions in the period of transforming economy.Recommendations are given on the following aspects: modernization of income taxation system for natural persons; tax payment in case of wage computation; exclusion of tax payments and assignments fi-om production cost value which are not connected with the production process; tax computation for real property; evaluation of enterprise taxation level.The paper shows the possible cases concerning formation of tax payments and assignments of an enterprise and its structural sub-divisions.Taxation system is shown at the level of enterprise structural sub-divisions (shop, department, at the level of shop structural sub-divisions (section, team, for works to be executed by an individual person of the production process (operation, product, works, services. This system promotes to efficient functioning of intra-production economical relations.The paper provides possible variants of formation of taxation payments and assignments for an enterprise and its structural sub-divisions.

Total Site Integration and paper machine technologies; Total site integration ja paperikoneteknologia - PMST 02

Energy Technology Data Exchange (ETDEWEB)

Puumalainen, T.; Kaijaluoto, S.; Tervonen, P.; Edelmann, K. [VTT Energy, Jyvaeskylae (Finland)

1998-12-31

During the last 30 years the production capacity of a paper machine has tripled. The fastest machines of today run over about 1600 m/min, the web width being around 10 m. The desire to further increase the production capacity is leading to more expensive paper machines and to larger buildings, if current pressing and drying techniques are used. New pressing and drying techniques will decrease the need of thermal energy. Closed water cycles reduce the need of secondary heat abundantly available from the dryer section based on cylinder drying. Total Site Integration studies are required when the effect of new process concepts are to be evaluated against energy efficiency and environmental impacts. A proto type tool has been developed and the effect of new paper machine concepts on energy consumption have been analysed. The utilisation possibilities of the surplus energy will be studied later in the course of this project. (orig.)

Total Site Integration and paper machine technologies; Total site integration ja paperikoneteknologia - PMST 02

Energy Technology Data Exchange (ETDEWEB)

Puumalainen, T; Kaijaluoto, S; Tervonen, P; Edelmann, K [VTT Energy, Jyvaeskylae (Finland)

1999-12-31

During the last 30 years the production capacity of a paper machine has tripled. The fastest machines of today run over about 1600 m/min, the web width being around 10 m. The desire to further increase the production capacity is leading to more expensive paper machines and to larger buildings, if current pressing and drying techniques are used. New pressing and drying techniques will decrease the need of thermal energy. Closed water cycles reduce the need of secondary heat abundantly available from the dryer section based on cylinder drying. Total Site Integration studies are required when the effect of new process concepts are to be evaluated against energy efficiency and environmental impacts. A proto type tool has been developed and the effect of new paper machine concepts on energy consumption have been analysed. The utilisation possibilities of the surplus energy will be studied later in the course of this project. (orig.)

Optimization and Technical/Economical Evaluation of Biogas Production from Biosludge from Pulp and Paper Mills; Optimering och teknisk/ekonomisk utvaerdering av biogasproduktion fraan bioslam fraan massa-/pappersbruk