Testing for seasonal unit roots in monthly panels of time series

NARCIS (Netherlands)

R.M. Kunst (Robert); Ph.H.B.F. Franses (Philip Hans)

2009-01-01

textabstractWe consider the problem of testing for seasonal unit roots in monthly panel data. To this aim, we generalize the quarterly CHEGY test to the monthly case. This parametric test is contrasted with a new nonparametric test, which is the panel counterpart to the univariate RURS test that

Nonlinear Analysis and Post-Test Correlation for a Curved PRSEUS Panel

Science.gov (United States)

Gould, Kevin; Lovejoy, Andrew E.; Jegley, Dawn; Neal, Albert L.; Linton, Kim, A.; Bergan, Andrew C.; Bakuckas, John G., Jr.

2013-01-01

The Pultruded Rod Stitched Efficient Unitized Structure (PRSEUS) concept, developed by The Boeing Company, has been extensively studied as part of the National Aeronautics and Space Administration's (NASA s) Environmentally Responsible Aviation (ERA) Program. The PRSEUS concept provides a light-weight alternative to aluminum or traditional composite design concepts and is applicable to traditional-shaped fuselage barrels and wings, as well as advanced configurations such as a hybrid wing body or truss braced wings. Therefore, NASA, the Federal Aviation Administration (FAA) and The Boeing Company partnered in an effort to assess the performance and damage arrestments capabilities of a PRSEUS concept panel using a full-scale curved panel in the FAA Full-Scale Aircraft Structural Test Evaluation and Research (FASTER) facility. Testing was conducted in the FASTER facility by subjecting the panel to axial tension loads applied to the ends of the panel, internal pressure, and combined axial tension and internal pressure loadings. Additionally, reactive hoop loads were applied to the skin and frames of the panel along its edges. The panel successfully supported the required design loads in the pristine condition and with a severed stiffener. The panel also demonstrated that the PRSEUS concept could arrest the progression of damage including crack arrestment and crack turning. This paper presents the nonlinear post-test analysis and correlation with test results for the curved PRSEUS panel. It is shown that nonlinear analysis can accurately calculate the behavior of a PRSEUS panel under tension, pressure and combined loading conditions.

Convergence Hypothesis: Evidence from Panel Unit Root Test with Spatial Dependence

Directory of Open Access Journals (Sweden)

Lezheng Liu

2006-10-01

Full Text Available In this paper we test the convergence hypothesis by using a revised 4- step procedure of panel unit root test suggested by Evans and Karras (1996. We use data on output for 24 OECD countries over 40 years long. Whether the convergence, if any, is conditional or absolute is also examined. According to a proposition by Baltagi, Bresson, and Pirotte (2005, we incorporate spatial autoregressive error into a fixedeffect panel model to account for not only the heterogeneous panel structure, but also spatial dependence, which might induce lower statistical power of conventional panel unit root test. Our empirical results indicate that output is converging among OECD countries. However, convergence is characterized as conditional. The results also report a relatively lower convergent speed compared to conventional panel studies.

The development of an Infrared Environmental System for TOPEX Solar Panel Testing

Science.gov (United States)

Noller, E.

1994-01-01

Environmental testing and flight qualification of the TOPEX/POSEIDON spacecraft solar panels were performed with infrared (IR) lamps and a control system that were newly designed and integrated. The basic goal was more rigorous testing of the costly panels' new composite-structure design without jeopardizing their safety. The technique greatly reduces the costs and high risks of testing flight solar panels.

Diversity and testing requirements of programmable automation systems

International Nuclear Information System (INIS)

Haapanen, P.; Maskuniitty, M.

1993-04-01

In the report programmable digital operation and safety automation systems for nuclear power plants are discussed. The programmable systems deviate by their properties and behaviour from the conventional non-programmable systems in such extent, that their verification and validation for safety critical applications requires new methods and practices. The safety assessment can not be based on conventional probabilistic methods due to the difficulties in the quantification of the reliability of the software and hardware. A safety critical programmable system shall include diverse redundant parts so that no residual program fault can not cause the failure of the intended function of the system. Although complete testing of a programmable system is impossible, different tests have a central role in the production and validation process of the system. Diversity is important also in confidence building measures for the implemented system. Independent analysis and testing of the system should use different methods and tools from those used in the production and validation process by the system vendor. Use of diversity and testing are concluded to be central issues in producing safe programmable system and in proving them to be safe enough. By combining functional and programming diversity in a suitable way one can produce a system that is safe enough without having a non-programmable back-up system. (48 refs., 10 figs., 2 tabs.)

Panel manipulation in social stress testing:The Bath experimental stress test for children (BEST-C)

OpenAIRE

Cheetham, Tara J.; Turner-Cobb, Julie M.

2016-01-01

BackgroundWhilst acute stress paradigms in adults make use of adult panel members, similar paradigms modified for child participants have not manipulated the panel. Most work has utilised an audience of adult confederates, regardless of the age of the population being tested. The aim of this study was to trial a social stress test for children that provided a meaningful environment using age-matched child peers as panel actors.MethodsThirty-three participants (7-11 years) underwent the Bath E...

The Dutch Brucella abortus monitoring programme for cattle: the impact of false-positive serological reactions and comparison of serological tests.

Science.gov (United States)

Emmerzaal, A; de Wit, J J; Dijkstra, Th; Bakker, D; van Zijderveld, F G

2002-02-01

The Dutch national Brucella abortus eradication programme for cattle started in 1959. Sporadic cases occurred yearly until 1995; the last infected herd was culled in 1996. In August 1999 the Netherlands was declared officially free of bovine brucellosis by the European Union. Before 1999, the programme to monitor the official Brucella-free status of bovine herds was primarily based on periodical testing of dairy herds with the milk ring test (MRT) and serological testing of all animals older than 1 year of age from non-dairy herds, using the micro-agglutination test (MAT) as screening test. In addition, serum samples of cattle that aborted were tested with the MAT. The high number of false positive reactions in both tests and the serum agglutination test (SAT) and complement fixation test (CFT) used for confirmation seemed to result in unnecessary blockade of herds, subsequent testing and slaughter of animals. For this reason, a validation study was performed in which three indirect enzyme-linked immunosorbent assays (ELISAs), the CFT and the SAT were compared using a panel of sera from brucellosis-free cattle, sera from experimentally infected cattle, and sera from cattle experimentally infected with bacteria which are known to induce cross-reactive antibodies (Pasteurella, Salmonella, Yersinia, and Escherichia). Moreover, four ELISAs and the MRT were compared using a panel of 1000 bulk milk samples from Brucella-free herds and 12 milk samples from Brucella abortus- infected cattle. It is concluded that the ELISA obtained from ID-Lelystad is the most suitable test to monitor the brucelosis free status of herds because it gives rise to fewer false-positive reactions than the SAT.

Income and CO2 emissions: Evidence from panel unit root and cointegration tests

International Nuclear Information System (INIS)

Lee, C.-C.; Lee, J.-D.

2009-01-01

This paper re-investigates the stationarity properties of per capita carbon dioxide (CO 2 ) emissions and real Gross Domestic Product (GDP) per capita for 109 countries within seven regional panel sets covering 1971-2003. We apply the recent unit-root test of the panel seemingly unrelated regressions augmented Dickey-Fuller (SURADF) test developed by Breuer et al. [2001. Misleading inferences from panel unit-root tests with an illustration from purchasing power parity. Review of International Economics 9, 482-493; 2002. Series-specific unit-root tests with panel data, Oxford Bulletin of Economics and Statistics 64, 527-546]. The panel SURADF test accounts for the presence of cross-country correlations in the data, and the parameters in the panel specification vary across countries. More importantly, this test allows us to identify how many and which members of the panel contain a unit root. Overall, our empirical results illustrate that real GDP and CO 2 emissions in these countries are a mixture of I(0) and I(1) processes, and that the traditional panel unit-root tests could lead to misleading inferences as well as the conduct of cointegration analysis being perhaps inappropriate. The results of our analysis carry critical implications for the modeling of CO 2 emissions and GDP because of the different orders of integration for the two variables

Ageing tests study on wood-based sandwich panels

Directory of Open Access Journals (Sweden)

Mateo, Raquel

2011-12-01

Full Text Available Composite lightweight wood panels are being increasingly used in construction in Spain. Their growing use should be accompanied by necessary guarantees based on studies of their properties. As it is prescriptive and in addition to others tests, in the present work is examinated the durability of these panels when exposed to the climatic conditions, a characteristic of great importance for wood products, according to Guide ETAG 016, the current standard defining the ageing tests to be used. However, due to the use class of this material, there are indications that the testing outlined in this Guide is inappropriate for assessing the ageing of wood-based sandwich panels. Alternative tests are here proposed that recreate rather better the real conditions under which these products are used. Covering the samples in a waterproof sheeting permeable to the outward movement of water vapour, which is in fact used in the installation, provided the best procedure for testing these panels.

Los paneles sándwich de madera son un producto de creciente aplicación en la edificación de nuestro país. Este ascendente uso del material debe estar acompañado de las garantías necesarias avaladas por un estudio previo de sus prestaciones. Como es preceptivo y entre otros, se evalúa su durabilidad frente a las condiciones climatológicas, clave en los productos derivados de la madera, acorde a la normativa actual definida con tal fin, la Guía ETAG 016. Sin embargo, debido a la clase de uso del material, se ha detectado que dicha normativa tal y como está concebida no es capaz de valorar su envejecimiento adecuadamente. En este trabajo se proponen ensayos alternativos al establecido tras exhaustivos análisis que recrean las condiciones reales de uso y más acordes a los productos de madera. Se concluye que la incorporación de una lámina impermeable pero permeable al vapor de agua hacia el exterior, como las utilizadas en el montaje, aportan el mejor

Correlation Results for a Mass Loaded Vehicle Panel Test Article Finite Element Models and Modal Survey Tests

Science.gov (United States)

Maasha, Rumaasha; Towner, Robert L.

2012-01-01

High-fidelity Finite Element Models (FEMs) were developed to support a recent test program at Marshall Space Flight Center (MSFC). The FEMs correspond to test articles used for a series of acoustic tests. Modal survey tests were used to validate the FEMs for five acoustic tests (a bare panel and four different mass-loaded panel configurations). An additional modal survey test was performed on the empty test fixture (orthogrid panel mounting fixture, between the reverb and anechoic chambers). Modal survey tests were used to test-validate the dynamic characteristics of FEMs used for acoustic test excitation. Modal survey testing and subsequent model correlation has validated the natural frequencies and mode shapes of the FEMs. The modal survey test results provide a basis for the analysis models used for acoustic loading response test and analysis comparisons

Panel Unit Root Tests by Combining Dependent Values: A Comparative Study

Directory of Open Access Journals (Sweden)

Xuguang Sheng

2011-01-01

Full Text Available We conduct a systematic comparison of the performance of four commonly used value combination methods applied to panel unit root tests: the original Fisher test, the modified inverse normal method, Simes test, and the modified truncated product method (TPM. Our simulation results show that under cross-section dependence the original Fisher test is severely oversized, but the other three tests exhibit good size properties. Simes test is powerful when the total evidence against the joint null hypothesis is concentrated in one or very few of the tests being combined, but the modified inverse normal method and the modified TPM have good performance when evidence against the joint null is spread among more than a small fraction of the panel units. These differences are further illustrated through one empirical example on testing purchasing power parity using a panel of OECD quarterly real exchange rates.

Simulated hail impact testing of photovoltaic solar panels

Science.gov (United States)

Moore, D.; Wilson, A.; Ross, R.

1978-01-01

Techniques used to simulate and study the effect of hail on photovoltaic solar panels are described. Simulated hail stones (frozen ice spheres projected at terminal velocity) or steel balls were applied by air guns, gravity drop, or static loading. Tests with simulated hail and steel balls yielded different results. The impact strength of 10 commercially available flat-plate photovoltaic modules was tested. It was found that none of the six panel designs incorporating clear potting silicone material as the outermost layer remained undamaged by 1-in. simulated hailstones, while a photovoltaic module equipped with a 0.188-in.-thick acrylic cover sheet would be able to withstand the impact of a 2-in.-diameter hailstone.

Developing a solar panel testing system

Directory of Open Access Journals (Sweden)

Árpád Rácz

2009-10-01

Full Text Available Solar energy is increasingly used togenerate electricity for individual households. There isa wide variety of solar panel technologies, whichshould be tested at an individual level during theirlifetime. In this paper, the development of a testingstation at the University of Debrecen is presented. Thetesting system can be used for research andeducational purposes and for in field applicationsequally well.

Tank testing of a 2500-cm2 solar panel

Science.gov (United States)

Bever, R. S.; Staskus, J.

1981-01-01

A 50 cm by 50 cm solar array panel test patch was investigated for spacecraft charging and arcing effects. Bombardment with monochromatic electron was carried out. Some objectives of the test were: (1) to estimate at what voltage of electron bombardment arcing would be probable; (2) to find whether the arc's energy would be tolerable or damagingly large; (3) to try and separate thermal and photoeffects; and, (4) to see whether materials used were such as to minimize arcing. Some conclusions were: In sunlight the tracking data relay satellite's solar panel which has ceria glass on the front and conductive paint on the backside is probably a good design for reducing charge-up. In a geomagnetic substorm simulated in testing there will be arcing at the interconnects during eclipse and transitions into and out of eclipse in testing especially in view of the very cold temperatures that will be reached by this lightweight array. Ceria-doped glass is preferred to fused silica glass for reducing charge build up. The Kapton bare patch should still be conductively painted. The differential voltages on the panel determine when arcing first begins, and the electron beam voltages vary depending upon whether the metallic structure is directly grounded or semifloating.

In-plane shear test of fibre reinforced concrete panels

DEFF Research Database (Denmark)

Solgaard, Anders Ole Stubbe; Stang, Henrik; Goltermann, Per

2008-01-01

The present paper concerns the investigation of polymer Fiber Reinforced Concrete (FRC) panels subjected to in-plane shear. The use of fibers as primary reinforcement in panels is a new application of fiber reinforcement, hence test methods, design bases and models are lacking. This paper...... contributes to the investigation of fibers as reinforcement in panels with experimental results and a consistent approach to material characterization and modeling. The proposed model draws on elements from the classical yield line theory of rigid, perfectly plastic materials and the theory of fracture...... mechanics. Model panels have been cast to investigate the correlation between the load bearing capacity and the amount of fibers (vol. %) in the mixture. The type of fibers in the mixture was Poly Vinyl Alcohol (PVA) fibers, length 8 mm, diameter 0.04 mm. The mechanical properties of the FRC have been...

Radiant heating tests of several liquid metal heat-pipe sandwich panels

International Nuclear Information System (INIS)

Camarda, C.J.; Basiulis, A.

1983-08-01

Integral heat pipe sandwich panels, which synergistically combine the thermal efficiency of heat pipes and the structural efficiency of honeycomb sandwich construction, were conceived as a means of alleviating thermal stress problems in the Langley Scramjet Engine. Test panels which utilized two different wickable honeycomb cores, facesheets with screen mesh sintered to the internal surfaces, and a liquid metal working fluid (either sodium or potassium) were tested by radiant heating at various heat load levels. The heat pipe panels reduced maximum temperature differences by 31 percent with sodium working fluid and 45 percent with potassium working fluid. Results indicate that a heat pipe sandwich panel is a potential, simple solution to the engine thermal stress problem. Other interesting applications of the concept include: cold plates for electronic component and circuit card cooling, radiators for large space platforms, low distortion large area structures (e.g., space antennas) and laser mirrors

AXAF-I Low Intensity-Low Temperature (LILT) Testing of the Development Verification Test (DVT) Solar Panel

Science.gov (United States)

Alexander, Doug; Edge, Ted; Willowby, Doug

1998-01-01

The planned orbit of the AXAF-I spacecraft will subject the spacecraft to both short, less than 30 minutes for solar and less than 2 hours for lunar, and long earth eclipses and lunar eclipses with combined conjunctive duration of up to 3 to 4 hours. Lack of proper Electrical Power System (EPS) conditioning prior to eclipse may cause loss of mission. To avoid this problem, for short eclipses, it is necessary to off-point the solar array prior to or at the beginning of the eclipse to reduce the battery state of charge (SOC). This yields less overcharge during the high charge currents at sun entry. For long lunar eclipses, solar array pointing and load scheduling must be tailored for the profile of the eclipse. The battery SOC, loads, and solar array current-voltage (I-V) must be known or predictable to maintain the bus voltage within acceptable range. To address engineering concerns about the electrical performance of the AXAF-I solar array under Low Intensity and Low Temperature (LILT) conditions, Marshall Space Flight Center (MSFC) engineers undertook special testing of the AXAF-I Development Verification Test (DVT) solar panel in September-November 1997. In the test the DVT test panel was installed in a thermal vacuum chamber with a large view window with a mechanical "flapper door". The DVT test panel was "flash" tested with a Large Area Pulse Solar Simulator (LAPSS) at various fractional sun intensities and panel (solar cell) temperatures. The testing was unique with regards to the large size of the test article and type of testing performed. The test setup, results, and lessons learned from the testing will be presented.

Concentrating Solar Power Central Receiver Panel Component Fabrication and Testing FINAL REPORT

Energy Technology Data Exchange (ETDEWEB)

McDowell, Michael W [Pratt & Whitney Rocketdyne; Miner, Kris [Pratt & Whitney Rocketdyne

2013-03-30

The objective of this project is to complete a design of an advanced concentrated solar panel and demonstrate the manufacturability of key components. Then confirm the operation of the key components under prototypic solar flux conditions. This work is an important step in reducing the levelized cost of energy (LCOE) from a central receiver solar power plant. The key technical risk to building larger power towers is building the larger receiver systems. Therefore, this proposed technology project includes the design of an advanced molten salt prototypic sub-scale receiver panel that can be utilized into a large receiver system. Then complete the fabrication and testing of key components of the receive design that will be used to validate the design. This project shall have a significant impact on solar thermal power plant design. Receiver panels of suitable size for utility scale plants are a key element to a solar power tower plant. Many subtle and complex manufacturing processes are involved in producing a reliable, robust receiver panel. Given the substantial size difference between receiver panels manufactured in the past and those needed for large plant designs, the manufacture and demonstration on prototype receiver panel components with representative features of a full-sized panel will be important to improving the build process for commercial success. Given the thermal flux limitations of the test facility, the panel components cannot be rendered full size. Significance changes occurred in the projects technical strategies from project initiation to the accomplishments described herein. The initial strategy was to define cost improvements for the receiver, design and build a scale prototype receiver and test, on sun, with a molten salt heat transport system. DOE had committed to constructing a molten salt heat transport loop to support receiver testing at the top of the NSTTF tower. Because of funding constraints this did not happen. A subsequent plan to

Low frequency noise as a control test for spacial solar panels

Science.gov (United States)

Orsal, B.; Alabedra, R.; Ruas, R.

1986-07-01

The present study of low frequency noise in a forward-biased dark solar cell, in order to develop an NDE test method for solar panels, notes that a single cell with a given defect is thus detectable under dark conditions. The test subject was a space solar panel consisting of five cells in parallel and five in series; these cells are of the n(+)-p monocrystalline Si junction type. It is demonstrated that the noise associated with the defective cell is 10-15 times higher than that of a good cell. Replacement of a good cell by a defective one leads to a 30-percent increase in the noise level of the panel as a whole.

Tuned Chamber Core Panel Acoustic Test Results

Science.gov (United States)

Schiller, Noah H.; Allen, Albert R.

2016-01-01

This report documents acoustic testing of tuned chamber core panels, which can be used to supplement the low-frequency performance of conventional acoustic treatment. The tuned chamber core concept incorporates low-frequency noise control directly within the primary structure and is applicable to sandwich constructions with a directional core, including corrugated-, truss-, and fluted-core designs. These types of sandwich structures have long, hollow channels (or chambers) in the core. By adding small holes through one of the facesheets, the hollow chambers can be utilized as an array of low-frequency acoustic resonators. These resonators can then be used to attenuate low-frequency noise (below 400 Hz) inside a vehicle compartment without increasing the weight or size of the structure. The results of this test program demonstrate that the tuned chamber core concept is effective when used in isolation or combined with acoustic foam treatments. Specifically, an array of acoustic resonators integrated within the core of the panels was shown to improve both the low-frequency absorption and transmission loss of the structure in targeted one-third octave bands.

Fabrication of a first wall panel by diffusion bonding

International Nuclear Information System (INIS)

Moreschi, L.F.; Pizzuto, A.; Alessandrini, I.

2002-01-01

Separated First Wall Panels mechanically attached to a shield block is now the reference concept for the Primary Wall Modules of RTO/RC ITER. The objective of the present work is to demonstrate the practical feasibility of a First Wall Panel utilizing a duplex round (steel) in square (copper) heat sink wound around a steel core and covered by Beryllium armour tiles. These three different materials (Be, Cu, steel) are joined together by diffusion bonding. The Copper alloy/stainless steel and Copper alloy/Beryllium joints were studied and developed selecting the optimal parameters for the related diffusion process. Several specimens were manufactured to be mechanically and thermally tested. The joints were mechanically tested using dedicated press equipment and investigated by micro-structural analysis with optical and SEM microscopy. Some thermal tests were finally carried out using an Electron Beam Facility. A dedicated R and D programme has led to the development of a co-drawing process, suitable for manufacturing the duplex Copper alloy-stainless steel heat sink. Two mock-ups were manufactured, the first in reduced-scale to test the thermal performance of the system, the second of larger scale and geometry better to represent the First Wall Panel

Why Panel Tests of Purchasing Power Parity Should Allow for Heterogeneous Mean Reversion

NARCIS (Netherlands)

C.G. Koedijk (Kees); B. Tims (Ben); M.A. van Dijk (Mathijs)

2010-01-01

textabstractAbstract Recent studies of purchasing power parity (PPP) use panel tests that fail to take into account heterogeneity in the speed of mean reversion across real exchange rates. In contrast to several other severe restrictions of panel models and tests of PPP, the assumption of

Programmable automated transistor test system

International Nuclear Information System (INIS)

Truong, L.V.; Sundberg, G.R.

1986-01-01

The paper describes a programmable automated transistor test system (PATTS) and its utilization to evaluate bipolar transistors and Darlingtons, and such MOSFET and special types as can be accommodated with the PATTS base-drive. An application of a pulsed power technique at low duty cycles in a non-destructive test is used to examine the dynamic switching characteristic curves of power transistors. Data collection, manipulation, storage, and output are operator interactive but are guided and controlled by the system software. In addition a library of test data is established on disks, tapes, and hard copies for future reference

Coal consumption and economic growth nexus: Evidence from bootstrap panel Granger causality test

Directory of Open Access Journals (Sweden)

Anoruo Emmanuel

2017-01-01

Full Text Available This paper explores the causal relationship between coal consumption and economic growth for a panel of 15 African countries using bootstrap panel Granger causality test. Specifically, this paper uses the Phillips-Perron unit root test to ascertain the order of integration for the coal consumption and economic growth series. A bootstrap panel Granger causality test is employed to determine the direction of causality between coal consumption and economic growth. The results provide evidence of unidirectional causality from economic growth to coal consumption. This finding implies that coal conservation measures may be implemented with little or no adverse impact on economic growth for the sample countries as a group.

Panel training programme for the Protected Designation of Origin “Aceituna Aloreña de Malaga”

Directory of Open Access Journals (Sweden)

Galán-Soldevilla, H.

2012-03-01

Full Text Available A training programme (52 h was developed for the Protected Designation of Origin (PDO Aceituna Aloreña de Málaga quality certification panel. Recruiting of the panel was done by personal interview with open questions between producers and technicians of the product and seven tests were submitted to potential candidates during the selection step (4h. Training was done in two stages: a basic training period (12h in which the assessors developed their sensory memory and improved their aptitude for detecting, recognizing and describing the sensory stimuli and a specific training period (36 h, in which the sample preparation, test conditions and the sensory profile were established. The specific training finished when the evaluation method and requirements of the Aloreña olives for the PDO were established and the panel work as a whole. 9 positive descriptors were analyzed in order to characterize Aloreña table olives: 4 for odor (fruity, green, seasoning and lactic, 2 for aroma (fruit and seasoning, 2 for basic tastes (acid and bitter and 1 for texture (crunchy. The Aloreña olive from Málaga is characterized by its fruity and seasoning odor and aroma, bitter taste and crunchy texture.

Se presenta el programa de formación de catadores para la Denominación de Origen Protegida (DOP “Aceituna Aloreña de Málaga”. Este programa, de 52 h de duración, se realiza en 2 etapas: una primera de selección (4 h donde se eligen a los candidatos más adecuados entre industriales y técnicos del sector y una segunda de entrenamiento (48h que consta de 2 fases: una primera general (12h donde los catadores aprenden el vocabulario y desarrollan la memoria sensorial y una segunda específica (36h donde se establece la forma de preparación de la muestra, las condiciones del ensayo, la hoja de perfil y los criterios de aceptación y rechazo para la DOP. Se valoran 9 atributos sensoriales: 4 de olor (frutado, verde/hierba, aliño y láctico, 2 de

Static and fatigue experimental tests on a full scale fuselage panel and FEM analyses

Directory of Open Access Journals (Sweden)

Raffaele Sepe

2016-02-01

Full Text Available A fatigue test on a full scale panel with complex loading condition and geometry configuration has been carried out using a triaxial test machine. The demonstrator is made up of two skins which are linked by a transversal butt-joint, parallel to the stringer direction. A fatigue load was applied in the direction normal to the longitudinal joint, while a constant load was applied in the longitudinal joint direction. The test panel was instrumented with strain gages and previously quasi-static tests were conducted to ensure a proper load transferring to the panel. In order to support the tests, geometric nonlinear shell finite element analyses were conducted to predict strain and stress distributions. The demonstrator broke up after about 177000 cycles. Subsequently, a finite element analysis (FEA was carried out in order to correlate failure events; due to the biaxial nature of the fatigue loads, Sines criterion was used. The analysis was performed taking into account the different materials by which the panel is composed. The numerical results show a good correlation with experimental data, successfully predicting failure locations on the panel.

Programmable, automated transistor test system

Science.gov (United States)

Truong, L. V.; Sundburg, G. R.

1986-01-01

A programmable, automated transistor test system was built to supply experimental data on new and advanced power semiconductors. The data will be used for analytical models and by engineers in designing space and aircraft electric power systems. A pulsed power technique was used at low duty cycles in a nondestructive test to examine the dynamic switching characteristic curves of power transistors in the 500 to 1000 V, 10 to 100 A range. Data collection, manipulation, storage, and output are operator interactive but are guided and controlled by the system software.

A Bootstrap Cointegration Rank Test for Panels of VAR Models

DEFF Research Database (Denmark)

Callot, Laurent

functions of the individual Cointegrated VARs (CVAR) models. A bootstrap based procedure is used to compute empirical distributions of the trace test statistics for these individual models. From these empirical distributions two panel trace test statistics are constructed. The satisfying small sample...

Testing Cross-Sectional Correlation in Large Panel Data Models with Serial Correlation

Directory of Open Access Journals (Sweden)

Badi H. Baltagi

2016-11-01

Full Text Available This paper considers the problem of testing cross-sectional correlation in large panel data models with serially-correlated errors. It finds that existing tests for cross-sectional correlation encounter size distortions with serial correlation in the errors. To control the size, this paper proposes a modification of Pesaran’s Cross-sectional Dependence (CD test to account for serial correlation of an unknown form in the error term. We derive the limiting distribution of this test as N , T → ∞ . The test is distribution free and allows for unknown forms of serial correlation in the errors. Monte Carlo simulations show that the test has good size and power for large panels when serial correlation in the errors is present.

Progress and Strategies for Testing of Materials for Solar Panels

Energy Technology Data Exchange (ETDEWEB)

Kurtz, Sarah

2017-04-25

Accelerated testing is key to confident launch of a new product. However, for new products like solar panels, the best approach is not always clear. The challenge for materials manufacturers is that test times can be long. Also, small-coupon testing may not predict the behavior in the full-size module, but testing of the full-size module is too expensive. As a result, solar panel test standards like IEC 61215 are useful, but are not sufficient. Material manufacturers have needed to define their own test protocols. This presentation will review some historical data (e.g., data show that manufacturers are making great progress toward reducing encapsulant discoloration) and describe advances in material testing (for example, new techniques are being demonstrated on how to more quantitatively assess adhesion, detect tendency for delamination, and understand how encapsulant properties affect other properties like cracking of cells). The International PV Quality Assurance Task Force has been researching climate-specific weathering tests toward the goal of defining international standards that would simplify qualification and quality assurance testing for materials. The status of these tests and the strategies for how to organize these standards to best meet the needs of the industry will be discussed.

Japanese programme on the development of high duty fuel and related power ramping tests

International Nuclear Information System (INIS)

Mishima, Y.

1983-01-01

Power ramping tests hitherto planned or carried out in Japan can be classified into two categories: 1) the tests programme by private organizations on fuel behaviour under various conditions of power ramping, in participating international programmes; and 2) a partially government sponsored programme, which was officially inaugurated in 1981 under the title of High-Duty Fuel Development Programme. The latter has been carried out by the Nuclear Power Engineering Test Centre, based on the schedule decided by the MITI Committee (chaired by the author), for a period of 10 years. These programmes will be described with emphasis on the latter (National Programme). (author)

Japanese programme on the development of high duty fuel and related power ramping tests

Energy Technology Data Exchange (ETDEWEB)

Mishima, Y

1983-06-01

Power ramping tests hitherto planned or carried out in Japan can be classified into two categories: 1) the tests programme by private organizations on fuel behaviour under various conditions of power ramping, in participating international programmes; and 2) a partially government sponsored programme, which was officially inaugurated in 1981 under the title of High-Duty Fuel Development Programme. The latter has been carried out by the Nuclear Power Engineering Test Centre, based on the schedule decided by the MITI Committee (chaired by the author), for a period of 10 years. These programmes will be described with emphasis on the latter (National Programme). (author)

Open-book tests to complement assessment-programmes : Analysis of open and closed-book tests

NARCIS (Netherlands)

Heijne-Penninga, M.; Kuks, J. B. M.; Schonrock-Adema, J.; Snijders, T. A. B.; Cohen-Schotanus, J.

Today's health sciences educational programmes have to deal with a growing and changing amount of knowledge. It is becoming increasingly important for students to be able to use and manage knowledge. We suggest incorporating open-book tests in assessment programmes to meet these changes. This view

A simple nonstationary-volatility robust panel unit root test

NARCIS (Netherlands)

Demetrescu, Matei; Hanck, Christoph

2012-01-01

We propose an IV panel unit root test robust to nonstationary error volatility. Its finite-sample performance is convincing even for many units and strong cross-correlation. An application to GDP prices illustrates the inferential impact of nonstationary volatility. (C) 2012 Elsevier B.V. All rights

Evaluation of the fusion technology and safety programme of the Joint Research Centre (1980-85)

International Nuclear Information System (INIS)

Haines, M.; Cabibbo, N.; Crocker, J.G.; Lecomte, M.; Merz, E.

1986-01-01

The Joint Research Centre, Ispra, has been involved in fusion research since 1973. In July 1985 the Commission of European Communities - DG XII, following a policy of systematically evaluating its RandD activities, appointed a panel of external experts to evaluate the fusion technology and safety programme carried out at the Joint Research Centre. This report describes the work of the panel in evaluating the research performed by the JRC within the framework of its 1984-87 programme. The achievements of the previous programme, 1980-83, were also taken into consideration. The different research areas covered in the programme, i.e.: reactor studies, breeding blanket technology, structural materials studies, risk assessment and tritium laboratory studies, are described and a draft proposal for the period 1987-90 presented. The evaluation panel has been asked to assess the following aspects: the scientific and technical achievements of the programme, the contribution of the programme to the development of other Community policies, the role played by the JRC in the European fusion research (including NET) and in international collaborations such as INTOR. From its assessment the evaluation panel has made a series of recommendations for the current programme and for future work

Experimental vibroacoustic testing of plane panels using synthesized random pressure fields.

Science.gov (United States)

Robin, Olivier; Berry, Alain; Moreau, Stéphane

2014-06-01

The experimental reproduction of random pressure fields on a plane panel and corresponding induced vibrations is studied. An open-loop reproduction strategy is proposed that uses the synthetic array concept, for which a small array element is moved to create a large array by post-processing. Three possible approaches are suggested to define the complex amplitudes to be imposed to the reproduction sources distributed on a virtual plane facing the panel to be tested. Using a single acoustic monopole, a scanning laser vibrometer and a baffled simply supported aluminum panel, experimental vibroacoustic indicators such as the Transmission Loss for Diffuse Acoustic Field, high-speed subsonic and supersonic Turbulent Boundary Layer excitations are obtained. Comparisons with simulation results obtained using a commercial software show that the Transmission Loss estimation is possible under both excitations. Moreover and as a complement to frequency domain indicators, the vibroacoustic behavior of the panel can be studied in the wave number domain.

A research program to reduce interior noise in general aviation airplanes. Design of an acoustic panel test facility

Science.gov (United States)

Roskam, J.; Muirhead, V. U.; Smith, H. W.; Henderson, T. D.

1977-01-01

The design, construction, and costs of a test facility for determining the sound transmission loss characteristics of various panels and panel treatments are described. The pressurization system and electronic equipment used in experimental testing are discussed as well as the reliability of the facility and the data gathered. Tests results are compared to pertinent acoustical theories for panel behavior and minor anomalies in the data are examined. A method for predicting panel behavior in the stiffness region is also presented.

A panel Granger-causality test of endogenous vs. exogenous growth

OpenAIRE

Jochen Hartwig

2009-01-01

The paper proposes a new test of endogenous vs. exogenous growth theories based on the Granger-causality methodology and applies it to a panel of 20 OECD countries. The test yields divergent evidence with respect to physical and human capital. For physical capital, the test results favor Solow-type exogenous growth theory over AK-type endogenous growth models. On the other hand, the test results lend support to human capital oriented endogenous growth models - like the Uzawa-Lucas model - rat...

A Bootstrap Neural Network Based Heterogeneous Panel Unit Root Test: Application to Exchange Rates

OpenAIRE

Christian de Peretti; Carole Siani; Mario Cerrato

2010-01-01

This paper proposes a bootstrap artificial neural network based panel unit root test in a dynamic heterogeneous panel context. An application to a panel of bilateral real exchange rate series with the US Dollar from the 20 major OECD countries is provided to investigate the Purchase Power Parity (PPP). The combination of neural network and bootstrapping significantly changes the findings of the economic study in favour of PPP.

Solar concentrator panel and gore testing in the JPL 25-foot space simulator

Science.gov (United States)

Dennison, E. W.; Argoud, M. J.

1981-01-01

The optical imaging characteristics of parabolic solar concentrator panels (or gores) have been measured using the optical beam of the JPL 25-foot space simulator. The simulator optical beam has been characterized, and the virtual source position and size have been determined. These data were used to define the optical test geometry. The point source image size and focal length have been determined for several panels. A flux distribution of a typical solar concentrator has been estimated from these data. Aperture photographs of the panels were used to determine the magnitude and characteristics of the reflecting surface errors. This measurement technique has proven to be highly successful at determining the optical characteristics of solar concentrator panels.

The CRRES high efficiency solar panel

International Nuclear Information System (INIS)

Trumble, T.M.

1991-01-01

This paper reports on the High Efficiency Solar Panel (HESP) experiments which is to provide both engineering and scientific information concerning the effects of space radiation on advanced gallium arsenide (GaAs) solar cells. The HESP experiment consists of an ambient panel, and annealing panel and a programmable load. This experiment, in conjunction with the radiation measurement experiments abroad the CREES, provides the first opportunity to simultaneously measure the trapped radiation belts and the results of radiation damage to solar cells. The engineering information will result in a design guide for selecting the optimum solar array characteristics for different orbits and different lifetimes. The scientific information will provide both correlation of laboratory damage effects to space damage effects and a better model for predicting effective solar cell panel lifetimes

Puncture panel optimization

International Nuclear Information System (INIS)

Glass, R.E.; Longenbaugh, R.S.

1986-01-01

Sandia National Laboratories developed the TRansUranic PACkage Transporter (TRUPACT) to transport defense contact-handled transuranic wastes. The package has been designed to meet the normal and hypothetical accident conditions in 10CFR71 which includes the demonstrated ability to survive a 1-meter drop onto a mild steel pin. The puncture protection is provided by puncture resistant panels. In conjunction with the development of TRUPACT, a series of experiments has been conducted to reduce the weight of the puncture resistant panels. The initial scoping tests resulted in a preliminary design incorporating 30 layers of Kevlar. This design has been shown to meet the regulatory puncture test. To reduce the weight of this panel, subscale tests were conducted on panels utilizing Kevlar yarns with varying mass per unit length (denier) as well as different resins. This paper reviews the testing undertaken in the original panel development and discusses the results obtained from the recent subscale and full-scale optimization tests

Diversity and testing requirements of programmable automation systems; Ohjelmoitavan automaation diversiteetti- ja testausvaatimukset

Energy Technology Data Exchange (ETDEWEB)

Haapanen, P.; Maskuniitty, M.

1993-04-01

In the report programmable digital operation and safety automation systems for nuclear power plants are discussed. The programmable systems deviate by their properties and behaviour from the conventional non-programmable systems in such extent, that their verification and validation for safety critical applications requires new methods and practices. The safety assessment can not be based on conventional probabilistic methods due to the difficulties in the quantification of the reliability of the software and hardware. A safety critical programmable system shall include diverse redundant parts so that no residual program fault can not cause the failure of the intended function of the system. Although complete testing of a programmable system is impossible, different tests have a central role in the production and validation process of the system. Diversity is important also in confidence building measures for the implemented system. Independent analysis and testing of the system should use different methods and tools from those used in the production and validation process by the system vendor. Use of diversity and testing are concluded to be central issues in producing safe programmable system and in proving them to be safe enough. By combining functional and programming diversity in a suitable way one can produce a system that is safe enough without having a non-programmable back-up system. (48 refs., 10 figs., 2 tabs.).

Advances in the diagnosis of hereditary kidney cancer: Initial results of a multigene panel test.

Science.gov (United States)

Nguyen, Kevin A; Syed, Jamil S; Espenschied, Carin R; LaDuca, Holly; Bhagat, Ansh M; Suarez-Sarmiento, Alfredo; O'Rourke, Timothy K; Brierley, Karina L; Hofstatter, Erin W; Shuch, Brian

2017-11-15

Panel testing has been recently introduced to evaluate hereditary cancer; however, limited information is available regarding its use in kidney cancer. The authors retrospectively reviewed test results and clinical data from patients who underwent targeted multigene panel testing of up to 19 genes associated with hereditary kidney cancer from 2013 to 2016. The frequency of positive (mutation/variant likely pathogenic), inconclusive (variant of unknown significance), and negative results was evaluated. A logistic regression analysis evaluated predictive factors for a positive test. Patients (n = 1235) had a median age at diagnosis of 46 years, which was significantly younger than the US population of individuals with kidney cancer (P kidney cancer. Panel tests may be particularly useful for patients who lack distinguishing clinical characteristics of known hereditary kidney cancer syndromes. The current results support the use of early age of onset for genetic counseling and/or testing. Cancer 2017;123:4363-71. © 2017 American Cancer Society. © 2017 American Cancer Society.

Description and characterization of the ACRR's programmable transient rod withdrawal mode

International Nuclear Information System (INIS)

Boldt, K.R.; Sullivan, W.H.; Kefauver, H.L.

1980-01-01

To satisfy experiment needs for Sandia's Advanced Reactor Safety Program, a programmable Transient Rod Withdrawal (TRW) mode has been developed for the Annular Core Research Reactor (ACRR). The programmable mode is a modification of the existing continuous-withdrawal TRW mode and permits speed and direction changes during the pulse sequence. Basically, a TRW operation is similar to a routine pulse operation except that transient rods are mechanically withdrawn rather than pneumatically fired. Being a pulse-type operation, the TRW mode complies with pulse-mode safety system settings. Control system interlocks prevent the pneumatic firing of rods in the TRW mode. The hardware for the programmable TRW mode includes three ACRR transient rods, the ACRR timer, two rod programmers, a minicomputer and a summing circuit for position indication. Each ACRR transient rod is mechanically driven by a stepping motor (rated torque at 4.24 joules) and is capable of a maximum TRW speed of 26.7 centimeters/ second. The maximum reactivity insertion rate is $2.45/second with a transient rod bank worth of $3.00 and $3.47/second with a bank worth of $4.25, which is expected to be installed soon. The ACRR timer is a multifunctional timer used in all operating modes of the reactor. In the programmable TRW mode, the timer starts the rod programmers and drops regulating rods to terminate the operation. Programmed withdrawal capability is provided by one of two rod programmers (a hardwire-based unit and a microprocessor-based unit). The hardwire unit has eight intervals in which speed, direction and distance are selected by switches on the front panel. The microprocessor-based unit has the capability of 64 intervals in which speed, direction, and distance or time can be specified. Programming this unit is accomplished from the front panel or by inputting data from an HP-9845. minicomputer via a digital I/O interface. Self-test programs in the software provide a continual check of an operating

The Northern Regional Programme for the acceptance testing of X-ray equipment

International Nuclear Information System (INIS)

Faulkner, K.; Harrison, R.M.; Kotre, C.J.; Smith, S.; Davies, M.; Barker, P.

1989-01-01

Since 1984 the Regional Medical Physics Department has participated in a regional acceptance testing programme for all X-ray equipment from mobile units to computed tomography scanners. The organizational and radiation physics aspects of the programme are described. Three levels of tests are performed by physicists: the first on installation, the second after 3 months, and the final visit just prior to the end of the manufacturer's warranty. The second test is only performed if any aspect of performance requires rechecking as a result of the first visit. Acceptance test protocols are based on those published by the Institute of Physical Sciences in Medicine. Details of the limiting values for the acceptance test measurements are given. The results of the programme are discussed. In some instances the testing has resulted in modifications to the design and construction of X-ray equipment. Acceptance testing is important in determining a baseline standard of performance against which routine quality assurance may be assessed. (author)

A Panel Test of Purchasing Power Parity Under the Null of Stationarity

OpenAIRE

Hunter, J; Simpson, M

2001-01-01

Purchasing Power Parity (PPP) is tested using a sample of real exchange rate data for twelve European countries. Acknowledging that Augmented Dickey Fuller tests have low power, we apply a Panel test that considers the null of stationarity and corrects for serial dependence using a non-parametric kernel based method.

Hepatitis Panel: MedlinePlus Lab Test Information

Science.gov (United States)

... this page: https://medlineplus.gov/labtests/hepatitispanel.html Hepatitis Panel To use the sharing features on this page, please enable JavaScript. What is a Hepatitis Panel? Hepatitis is a type of liver disease. ...

Hepatic (Liver) Function Panel

Science.gov (United States)

... Educators Search English Español Blood Test: Hepatic (Liver) Function Panel KidsHealth / For Parents / Blood Test: Hepatic (Liver) ... kidneys ) is working. What Is a Hepatic (Liver) Function Panel? A liver function panel is a blood ...

Analysing sensory panel performance in a proficiency test using the PanelCheck software

DEFF Research Database (Denmark)

Tomic, O.; Luciano, G.; Nilsen, A.

2010-01-01

Check software, a workflow is proposed that guides the user through the data analysis process. This allows practitioners and non-statisticians to get an overview over panel performances in a rapid manner without the need to be familiar with details on the statistical methods. Visualisation of data analysis...... results plays an important role as this provides a time saving and efficient way of screening and investigating sensory panel performances. Most of the statistical methods used in this paper are available in the open source software PanelCheck, which may be downloaded and used for free....

Mean reversion in the current account of forty-eight african countries: Evidence from the Panel SURADF test

Science.gov (United States)

Chu, Hsiao-Ping; Chang, Tsangyao; Chang, Hsu-Ling; Su, Chi-Wei; Yuan, Young

2007-10-01

Here, the Panel seemingly unrelated regressions augmented Dickey-Fuller test (SURADF) test, first introduced and advanced by Breuer et al. [Misleading inferences from panel unit-root tests with an illustration from purchasing power parity, Rev. Int. Econ. 9(3) (2001) 482-493], is used to investigate the mean-reverting behavior of the current account of 48 African countries during the 1980-2004 periods. The empirical results from numerous panel-based unit root tests, conducted earlier, indicated that the current account of each of these countries is stationary; however, when Breuer et al.'s (2001) Panel SURADF test is conducted, it is found that a unit root exists in the current account of 11 of the countries studied. These results have one extremely important policy implication for the 48 African countries studied: the current account deficit of most is sustainable, and thus signifying that those nations should have no incentive to default on their international debt.

Panel and planar experimental shear behavior of wood panels ...

African Journals Online (AJOL)

Panel shear strength along the thickness and planar shear along the length of wood panels laminated softwood oriented OSB 10 mm thick, conditioned at different moisture contents (anhydrous medium, ambient temperature and humid medium) was measured on standardized test specimens, cut in half lengthwise panel ...

Roadmap for the international, accelerator-based neutrino programme

Energy Technology Data Exchange (ETDEWEB)

Cao, J. [Beijing, Inst. High Energy Phys. (China); de Gouvêa, A. [Northwestern Univ., Evanston, IL (United States); Duchesneau, D. [CNRS/IN2P3. Univ. Paris (France). Observatoire de Paris. AstroParticule et Cosmologie (APC); Geer, S. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States); Gomes, R. [Federal University of Goias (Brazil); Kim, S. B. [Seoul National Univ. (Korea, Republic of); Kobayashi, T. [High Energy Accelerator Research Organization (KEK), Tsukuba (Japan); Long, K. [Science and Technology Facilities Council (STFC), Oxford (United Kingdom). Rutherford Appleton Lab. (RAL); Maltoni, M. [Autonomous Univ. of Madrid (Spain); Mezzetto, M. [Univ. of Padua (Italy); Mondal, N. [Tata Inst. of Fundamental Research, Bombay (India); Shiozawa, M. [Univ. of Tokyo (Japan); Sobczyk, J. [Univ. of Wroclaw (Poland); Tanaka, H. A. [TRIUMF, Vancouver, BC (Canada); Wascko, M. [Imperial College, London (United Kingdom); Zeller, G. [Fermi National Accelerator Lab. (FNAL), Batavia, IL (United States)

2017-04-26

In line with its terms of reference the ICFA Neutrino Panel has developed a roadmap for the international, accelerator-based neutrino programme. A "roadmap discussion document" was presented in May 2016 taking into account the peer-group-consultation described in the Panel's initial report. The "roadmap discussion document" was used to solicit feedback from the neutrino community---and more broadly, the particle- and astroparticle-physics communities---and the various stakeholders in the programme. The roadmap, the conclusions and recommendations presented in this document take into account the comments received following the publication of the roadmap discussion document. With its roadmap the Panel documents the approved objectives and milestones of the experiments that are presently in operation or under construction. Approval, construction and exploitation milestones are presented for experiments that are being considered for approval. The timetable proposed by the proponents is presented for experiments that are not yet being considered formally for approval. Based on this information, the evolution of the precision with which the critical parameters governinger the neutrino are known has been evaluated. Branch or decision points have been identified based on the anticipated evolution in precision. The branch or decision points have in turn been used to identify desirable timelines for the neutrino-nucleus cross section and hadro-production measurements that are required to maximise the integrated scientific output of the programme. The branch points have also been used to identify the timeline for the R&D required to take the programme beyond the horizon of the next generation of experiments. The theory and phenomenology programme, including nuclear theory, required to ensure that maximum benefit is derived from the experimental programme is also discussed.

Cone calorimeter testing of foam core sandwich panels treated with intumescent paper underneath the veneer (FRV)

Science.gov (United States)

Mark A. Dietenberger; Ali Shalbafan; Johannes Welling

2017-01-01

Surfaces of novel foam core sandwich panels were adhered with intumescent fire‐retardant paper underneath the veneers (FRV) to improve their flammability properties. The panels were evaluated by means of cone calorimeter test (ASTM E 1354). Variables tested were different surface layer treatments, adhesives used for veneering, surface layer thicknesses, and processing...

The integration of major fuel source markets in China. Evidence from panel cointegration tests

International Nuclear Information System (INIS)

Ma, Hengyun; Oxley, Les

2010-01-01

The paper tests for energy price co-movement in China over the 'new regime' as part of a strategy to test for the existence of a national energy market. Panel cointegration test statistics suggest that not all energy commodities are spatially homogenous in prices and the processes of energy price cointegration are different over time and over groups of fuels. The statistics demonstrate China's gradual, spatially partial and idiosyncratic energy reform process. Coal and electricity price series have co-moved since 2003, while the national panel cointegration test statistics suggest that gasoline and diesel price series have co-moved since 1997. Regional panel tests also show that there are apparently differences in the emergence of energy price co-movement. This suggests that regional energy markets have emerged in China. One of the important lessons of the research is that an energy market has, to some extent, already emerged in China and, as a consequence, energy prices are much less distorted than previously. If correct, this fact is of major global significance both in terms of future environmental effects and future trade and investment negotiations as China is seen internationally as a 'market driven economy'. (author)

Testing solar panels for small-size satellites: the UPMSAT-2 mission

Science.gov (United States)

Roibás-Millán, E.; Alonso-Moragón, A.; Jiménez-Mateos, A. G.; Pindado, S.

2017-11-01

At present, the development of small-size satellites by universities, companies and research institutions has become usual practice, and is spreading rapidly. In this kind of project cost plays a significant role. One of the main areas are the assembly, integration and test (AIT) plans, which carry an associated cost for simulating environmental conditions. For instance, in the power subsystems test and, in particular, in the testing of solar panels, the irradiance and temperature conditions might be optimum so the performance of the system can be shown next to real operational conditions. To reproduce the environmental conditions in terms of irradiance, solar simulators are usually used, which carries an associated increase in cost for testing the equipment. The aim of this paper is to present an alternative and inexpensive way to perform AIT plans on spacecraft power subsystems, from a testing campaign performed using outdoor clean-sky conditions and an isolation system to protect the panels. A post-process of the measured data is therefore needed, taking into account the conditions in which the test has been accomplished. The I-V characteristics obtained are compared with a theoretical 1-diode/2-resistor equivalent electric circuit, achieving enough precision based solely on the manufacturer’s data.

Testing solar panels for small-size satellites: the UPMSAT-2 mission

International Nuclear Information System (INIS)

Roibás-Millán, E; Alonso-Moragón, A; Jiménez-Mateos, A G; Pindado, S

2017-01-01

At present, the development of small-size satellites by universities, companies and research institutions has become usual practice, and is spreading rapidly. In this kind of project cost plays a significant role. One of the main areas are the assembly, integration and test (AIT) plans, which carry an associated cost for simulating environmental conditions. For instance, in the power subsystems test and, in particular, in the testing of solar panels, the irradiance and temperature conditions might be optimum so the performance of the system can be shown next to real operational conditions. To reproduce the environmental conditions in terms of irradiance, solar simulators are usually used, which carries an associated increase in cost for testing the equipment. The aim of this paper is to present an alternative and inexpensive way to perform AIT plans on spacecraft power subsystems, from a testing campaign performed using outdoor clean-sky conditions and an isolation system to protect the panels. A post-process of the measured data is therefore needed, taking into account the conditions in which the test has been accomplished. The I–V characteristics obtained are compared with a theoretical 1-diode/2-resistor equivalent electric circuit, achieving enough precision based solely on the manufacturer’s data. (paper)

Fabrication and testing of fire resistant graphite composite panels

Science.gov (United States)

Roper, W. D.

1986-01-01

Eight different graphite composite panels were fabricated using four different resin matrices. The resin matrices included Hercules 71775, a blend of vinylpolystyrpyridine and bismaleimide, H795, a bismaleimide, Cycom 6162, a phenolic, and PSP 6022m, a polystyrylpyridine. Graphite panels were fabricated using fabric or unidirectional tape. Described are the processes for preparing these panels and some of their mechanical, thermal and flammability properties. Panel properties are compared with state-of-the-art epoxy fiberglass composite panels.

Unreliable alcohol testing in a shipping safety programme.

Science.gov (United States)

Helander, Anders; Hagelberg, Charlotte Asker; Beck, Olof; Petrini, Björn

2009-08-10

Within a maritime alcohol and drug testing programme, a case showing an unphysiological urine ethanol concentration (235 mmol/L, 10.8 g/L) was found. The sample contained low levels of the ethanol metabolites ethyl glucuronide (EtG) and ethyl sulphate (EtS) which confirmed prior drinking, but also tested positive for the fermenting yeast Candida albicans which suggested post-sampling ethanol formation. This and other questionable cases prompted investigation of the suitability of urine alcohol testing for the intended application. Besides the routine measurements of ethanol, illicit drugs and creatinine, randomly selected ethanol-positive and ethanol-negative urines collected within the maritime programme were checked for the presence of EtG and EtS and for fungal and bacterial growth. Data on sample handling and storage was also gathered. Ten of 15 (67%) ethanol-positive and 4 of 9 (44%) ethanol-negative urines contained yeast and/or bacteria. Among the ethanol-positive cases, 4 (27%) were obviously false positives because EtG and EtS were not detected. Microbial action as the reason for false-high ethanol concentrations was indicated in other cases. When 17 bacteria-infected but fungi-negative urines were supplemented with glucose and stored for 1 week at 21 degrees C, ethanol was formed in 2 specimens containing Escherichia coli and E. coli plus P. aeruginosa. In these samples, EtG was also formed on storage while EtS was not. The routines employed for urine collection and handling within this substance abuse programme caused many false-positive identifications of alcohol use with unintended medico-legal consequences. Unpreserved urines stored without cooling should not be used for alcohol testing, given the high risk for microbial interference.

A test battery measuring auditory capabilities of listening panels

DEFF Research Database (Denmark)

Ghani, Jody; Ellermeier, Wolfgang; Zimmer, Karin

2005-01-01

a battery of tests covering a larger range of auditory capabilities in order to assess individual listeners. The format of all tests is kept as 'objective' as possible by using a three-alternative forced-choice paradigm in which the subject must choose which of the sound samples is different, thus keeping...... the instruction to the subjects simple and common for all tests. Both basic (e.g. frequency discrimination) and complex (e.g. profile analysis) psychoacoustic tests are covered in the battery and a threshold of discrimination or detection is obtained for each test. Data were collected on 24 listeners who had been...... recruited for participation in an expert listening panel for evaluating the sound quality of hi-fi audio systems. The test battery data were related to the actual performance of the listeners when judging the degradation in quality produced by audio codecs....

Comprehensive metabolic panel

Science.gov (United States)

Metabolic panel - comprehensive; Chem-20; SMA20; Sequential multi-channel analysis with computer-20; SMAC20; Metabolic panel 20 ... Chernecky CC, Berger BJ. Comprehensive metabolic panel (CMP) - blood. In: ... Tests and Diagnostic Procedures . 6th ed. St Louis, MO: ...

Composite panel development at JPL

Science.gov (United States)

Mcelroy, Paul; Helms, Rich

1988-01-01

Parametric computer studies can be use in a cost effective manner to determine optimized composite mirror panel designs. An InterDisciplinary computer Model (IDM) was created to aid in the development of high precision reflector panels for LDR. The materials properties, thermal responses, structural geometries, and radio/optical precision are synergistically analyzed for specific panel designs. Promising panels designs are fabricated and tested so that comparison with panel test results can be used to verify performance prediction models and accommodate design refinement. The iterative approach of computer design and model refinement with performance testing and materials optimization has shown good results for LDR panels.

Quality Assurance Programme for the Environmental Testing of the CMS Tracker Optical Links

OpenAIRE

Gill, K; Grabit, R; Troska, Jan K; Vasey, F; Zanet, A

2001-01-01

The QA programme is reviewed for the environmental compliance tests of commercial off-the-shelf (COTS) components for the CMS Tracker Optical link system. These environmental tests will take place in the pre-production and final production phases of the project and will measure radiation resistance, component lifetime, and sensitivity to magnetic fields. The evolution of the programme from small-scale prototype tests to the final pre-production manufacturing tests is outlined and the main env...

The procurement and testing of the stainless steel in-vessel panels of the Wendelstein 7-X Stellarator

International Nuclear Information System (INIS)

Peacock, A.; Girlinger, A.; Vorkoeper, A.; Boscary, J.; Greuner, H.; Hurd, F.; Mendelevitch, B.; Pirsch, H.; Stadler, R.; Zangl, G.

2011-01-01

320 In-vessel water cooled stainless steel panels, poloidal closure plates and pumping gap panels, covering an area of approximately 100 m 2 , are used in Wendelstein7-X to protect the plasma vessel. The panels are manufactured at Deggendorf, Germany by MAN Diesel and Turbo SE. The panels consist of a laser welded sandwich of stainless steel plates together with a labyrinth of cooling channels and have a complicated geometry to fit the plasma vessel of Wendelstein 7-X. The hydraulic and mechanical stability requirements whilst maintaining the tight tolerances for the shape of the components are very demanding. The panels are designed to operate at up to an average heat load of 100 kW/m 2 and a maximum heat load of 200 kW/m 2 with a water velocity of approximately 2 m s -1 . High heat flux testing of an un-cooled panel at a time averaged load of 200 kW/m 2 for 10 s were successfully performed to support the start up phase of Wendelstein 7-X operation. Extensive testing both during manufacture and after delivery to IPP-Garching demonstrates the suitability of the delivered panels for their purpose.

A research program to reduce interior noise in general aviation airplanes: Investigation of the characteristics of an acoustic panel test facility

Science.gov (United States)

Grosveld, F.; Vanaken, J.

1978-01-01

Sound pressure levels in the test facility were studied that are caused by varying: (1) microphone positions; (2) equalizer setting; and (3) panel clamping forces. Measurements were done by using a Beranek tube or this Beranek tube in combinations with an extension tube and a special test section. In all configurations tests were executed with and without a test panel installed. The influence of the speaker back panel and the back panel of the Beranek tube on the sound pressure levels inside the test tube were also investigated. It is shown that the definition of noise reduction is more useful in relation to this test facility than transmission loss.

Mechanical testing of a FW panel attachment system for ITER

International Nuclear Information System (INIS)

Oliva, Vladislav; Vaclavik, Jaroslav; Materna, Ales; Lorenzetto, Patrick; Furmanek, Andreas

2009-01-01

An objective of experiments and finite element simulations was to check the stiffness, the strength and the fatigue resistance of the attachment of the First Wall panels onto a shield block of blanket modules according to the ITER 2001 design. The panel has a poloidal key at the rear side (in so-called option A with the rear access bolting) and it is attached by means of special studs located on a key-way in the shield block. Special device for a test of stud tensile pre-load relaxation during a thermal cycling was developed. True-to-scale panels, the shield block mock-up and simplified studs were fabricated and the assembly was loaded alternatively by radial moment, poloidal force or poloidal moment simulating the loading during off-normal plasma operations. Thermal cycling led to an acceptable stud pre-load relaxation. Mechanical cycling caused neither the pre-load relaxation nor the loss of the contact in the key-way nor a damage of the attachment system. The combination of poloidal moment and radial force during vertical displacement events (VDEs) seems to be a most dangerous case because it could lead to the loss of the key-key-way contact.

Evaluation of the theory-based Quality Improvement in Physical Therapy (QUIP) programme: a one-group, pre-test post-test pilot study.

Science.gov (United States)

Rutten, Geert M; Harting, Janneke; Bartholomew, L Kay; Schlief, Angelique; Oostendorp, Rob A B; de Vries, Nanne K

2013-05-25

Guideline adherence in physical therapy is far from optimal, which has consequences for the effectiveness and efficiency of physical therapy care. Programmes to enhance guideline adherence have, so far, been relatively ineffective. We systematically developed a theory-based Quality Improvement in Physical Therapy (QUIP) programme aimed at the individual performance level (practicing physiotherapists; PTs) and the practice organization level (practice quality manager; PQM). The aim of the study was to pilot test the multilevel QUIP programme's effectiveness and the fidelity, acceptability and feasibility of its implementation. A one-group, pre-test, post-test pilot study (N = 8 practices; N = 32 PTs, 8 of whom were also PQMs) done between September and December 2009. Guideline adherence was measured using clinical vignettes that addressed 12 quality indicators reflecting the guidelines' main recommendations. Determinants of adherence were measured using quantitative methods (questionnaires). Delivery of the programme and management changes were assessed using qualitative methods (observations, group interviews, and document analyses). Changes in adherence and determinants were tested in the paired samples T-tests and expressed in effect sizes (Cohen's d). Overall adherence did not change (3.1%; p = .138). Adherence to three quality indicators improved (8%, 24%, 43%; .000 ≤ p ≤ .023). Adherence to one quality indicator decreased (-15.7%; p = .004). Scores on various determinants of individual performance improved and favourable changes at practice organizational level were observed. Improvements were associated with the programme's multilevel approach, collective goal setting, and the application of self-regulation; unfavourable findings with programme deficits. The one-group pre-test post-test design limits the internal validity of the study, the self-selected sample its external validity. The QUIP programme has the potential to change physical

Fabrication and laboratory-based performance testing of a building-integrated photovoltaic-thermal roofing panel

International Nuclear Information System (INIS)

Chen, Fangliang; Yin, Huiming

2016-01-01

Highlights: • A BIPVT solar panel is designed and fabricated for energy efficient buildings. • A high-speed manufacture method is developed to produce the functionally graded materials. • Laboratory tests demonstrate BIPVT’s energy efficiency improvement and innovations. • The PV efficiency is enhanced ∼24% through temperature control of the panel by water flow. • The combined electric and thermal efficiency reaches >75% of solar irradiation. - Abstract: A building integrated photovoltaic-thermal (BIPVT) multifunctional roofing panel has been developed in this study to harvest solar energy in the form of PV electricity as well as heat energy through the collection of warm water. As a key component of the multifunctional building envelope, an aluminum/high-density polyethylene (HDPE) functionally graded material (FGM) panel embedded with aluminum water tubes has been fabricated through the vibration-sedimentation approach. The FGM layer gradually transits material phases from well-conductive side (with aluminum dominated) to another highly insulated side (with HDPE). The heat in the PV cells can be easily transferred into the conductive side of the FGM and then collected by the water flow in the embedded tubes. Therefore, the operational temperature of the PV cells can be significantly lowered down, which recovers the PV efficiency in hot weather. In this way, the developed BIPVT panel is able to efficiently harvest solar energy in the form of both PV electricity and heat. The performance of a prototype BIPVT panel has been evaluated in terms of its thermal efficiency via warm water collection and PV efficiency via the output electricity. The laboratory test results demonstrate that significant energy conversion efficiency improvement can be achieved for both electricity generation and heat collection by the presented BIPVT roofing system. Overall, the performance indicates a very promising prospective of the new BIPVT multifunctional roofing panel.

VLF Cutler: September 1997 Four-Panel Tests; RADHAZ and Field Strength Measurement

National Research Council Canada - National Science Library

Hansen, P

1998-01-01

The objective of the four panel tests was to provide VLF Cutler with the capability of performing the special painting project and normal maintenance on the bow tie area towers of an inactive array...

Laser welded steel sandwich panel bridge deck development : finite element analysis and stake weld strength tests.

Science.gov (United States)

2009-09-01

This report summarizes the analysis of laser welded steel sandwich panels for use in bridge structures and : static testing of laser stake welded lap shear coupons. Steel sandwich panels consist of two face sheets : connected by a relatively low-dens...

Neutron radiography in Indian space programme

CERN Document Server

Viswanathan, K

1999-01-01

Pyrotechnic devices are indispensable in any space programme to perform such critical operations as ignition, stage separation, solar panel deployment, etc. The nature of design and configuration of different types of pyrotechnic devices, and the type of materials that are put in their construction make the inspection of them with thermal neutrons more favourable than any other non destructive testing methods. Although many types of neutron sources are available for use, generally the radiographic quality/exposure duration and cost of source run in opposite directions even after four decades of research and development. But in the area of space activity, by suitably combining the X-ray and neutron radiographic requirements, the inspection of the components can be made economically viable. This is demonstrated in the Indian space programme by establishing a 15 MeV linear accelerator based neutron generator facility to inspect medium to giant solid propellant boosters by X-ray inspection and all types of critic...

Modifications to the application of pressure to a quarter of the circumference of panel rings (tests 54 and 55)

Energy Technology Data Exchange (ETDEWEB)

Van Duyse, H [INIEX

1978-01-01

Tests 54 and 55 were carried out on rings made up of the usual type of panel. Test 54 involved panels manufactured at Zolder and Test 55 involved those manufactured at Beringen. Both types of ring are 20 cm thick, 64 cm wide and have an internal diameter of 4.20 m. The tests involved application of pressure to one quarter of the circumference, the remainder of the ring being subject to restraint against the steel testing frame. Timber chocks were inserted between the ring and the frame. The reinforcements tested were those used with the normal type of panel. An account of deformation of the ring, cracking of the panels, and deformation of the concrete is given. Tables and figures summarizing the results achieved are included. Maximum load prior to breaking was 292 t in the case of the Zolder ring and 293 t in the case of the Beringen ring; initial cracking occurred at 35 and 30 t, respectively. (In French and in Dutch)

The procurement and testing of the stainless steel in-vessel panels of the Wendelstein 7-X Stellarator

Energy Technology Data Exchange (ETDEWEB)

Peacock, A., E-mail: alan.peacock@ipp.mpg.de [European Commission c/o Max-Planck-Institut fuer Plasmaphysik, EURATOM Association, 85748 Garching (Germany); Girlinger, A. [MAN Diesel and Turbo SE D-94469 Deggendorf (Germany); Vorkoeper, A. [Max-Planck-Institut fuer Plasmaphysik, EURATOM Association, 17491 Greifswald (Germany); Boscary, J.; Greuner, H. [Max-Planck-Institut fuer Plasmaphysik, EURATOM Association, 85748 Garching (Germany); Hurd, F. [European Commission c/o Max-Planck-Institut fuer Plasmaphysik, EURATOM Association, 85748 Garching (Germany); Mendelevitch, B.; Pirsch, H.; Stadler, R.; Zangl, G. [Max-Planck-Institut fuer Plasmaphysik, EURATOM Association, 85748 Garching (Germany)

2011-10-15

320 In-vessel water cooled stainless steel panels, poloidal closure plates and pumping gap panels, covering an area of approximately 100 m{sup 2}, are used in Wendelstein7-X to protect the plasma vessel. The panels are manufactured at Deggendorf, Germany by MAN Diesel and Turbo SE. The panels consist of a laser welded sandwich of stainless steel plates together with a labyrinth of cooling channels and have a complicated geometry to fit the plasma vessel of Wendelstein 7-X. The hydraulic and mechanical stability requirements whilst maintaining the tight tolerances for the shape of the components are very demanding. The panels are designed to operate at up to an average heat load of 100 kW/m{sup 2} and a maximum heat load of 200 kW/m{sup 2} with a water velocity of approximately 2 m s{sup -1}. High heat flux testing of an un-cooled panel at a time averaged load of 200 kW/m{sup 2} for 10 s were successfully performed to support the start up phase of Wendelstein 7-X operation. Extensive testing both during manufacture and after delivery to IPP-Garching demonstrates the suitability of the delivered panels for their purpose.

Quality Assurance Programme for the Environmental Testing of the CMS Tracker Optical Links

CERN Document Server

Gill, K; Troska, Jan K; Vasey, F; Zanet, A

2001-01-01

The QA programme is reviewed for the environmental compliance tests of commercial off-the-shelf (COTS) components for the CMS Tracker Optical link system. These environmental tests will take place in the pre-production and final production phases of the project and will measure radiation resistance, component lifetime, and sensitivity to magnetic fields. The evolution of the programme from small-scale prototype tests to the final pre-production manufacturing tests is outlined and the main environmental effects expected for optical links operating within the Tracker are summarised. A special feature of the environmental QA programme is the plan for Advance Validation Tests (AVT's) developed in close collaboration with the various industrial partners. AVT procedures involve validation of a relatively small set of basic samples in advance of the full production of the corresponding batch of devices. Only those lots that have been confirmed as sufficiently rad-tolerant will be purchased and used in the final prod...

Effectiveness of a computer based medication calculation education and testing programme for nurses.

Science.gov (United States)

Sherriff, Karen; Burston, Sarah; Wallis, Marianne

2012-01-01

The aim of the study was to evaluate the effect of an on-line, medication calculation education and testing programme. The outcome measures were medication calculation proficiency and self efficacy. This quasi-experimental study involved the administration of questionnaires before and after nurses completed annual medication calculation testing. The study was conducted in two hospitals in south-east Queensland, Australia, which provide a variety of clinical services including obstetrics, paediatrics, ambulatory, mental health, acute and critical care and community services. Participants were registered nurses (RNs) and enrolled nurses with a medication endorsement (EN(Med)) working as clinicians (n=107). Data pertaining to success rate, number of test attempts, self-efficacy, medication calculation error rates and nurses' satisfaction with the programme were collected. Medication calculation scores at first test attempt showed improvement following one year of access to the programme. Two of the self-efficacy subscales improved over time and nurses reported satisfaction with the online programme. Results of this study may facilitate the continuation and expansion of medication calculation and administration education to improve nursing knowledge, inform practise and directly improve patient safety. Crown Copyright © 2011. Published by Elsevier Ltd. All rights reserved.

Testing for Unit Roots in Small Panels with Short-run and Long-run Cross-sectional Dependencies

OpenAIRE

Yoosoon Chang; Wonho Song

2009-01-01

An IV approach, using as instruments non-linear transformations of the lagged levels, is explored to test for unit roots in panels with general dependency and heterogeneity across cross-sectional units. We allow not only for the cross-sectional dependencies of innovations, but also for the presence of co-integration across cross-sectional levels. Unbalanced panels and panels with differing individual short-run dynamics and cross-sectionally related dynamics are also permitted. We also more ca...

Utilization of multigene panels in hereditary cancer predisposition testing: analysis of more than 2,000 patients

OpenAIRE

LaDuca, Holly; Stuenkel, A J; Dolinsky, Jill S.; Keiles, Steven; Tandy, Stephany; Pesaran, Tina; Chen, Elaine; Gau, Chia-Ling; Palmaer, Erika; Shoaepour, Kamelia; Shah, Divya; Speare, Virginia; Gandomi, Stephanie; Chao, Elizabeth

2014-01-01

Purpose: The aim of this study was to determine the clinical and molecular characteristics of 2,079 patients who underwent hereditary cancer multigene panel testing. Methods: Panels included comprehensive analysis of 14–22 cancer susceptibility genes (BRCA1 and BRCA2 not included), depending on the panel ordered (BreastNext, OvaNext, ColoNext, or CancerNext). Next-generation sequencing and deletion/duplication analyses were performed for all genes except EPCAM (deletion/duplication analysis o...

Performance Testing Methodology for Safety-Critical Programmable Logic Controller

International Nuclear Information System (INIS)

Kim, Chang Ho; Oh, Do Young; Kim, Ji Hyeon; Kim, Sung Ho; Sohn, Se Do

2009-01-01

The Programmable Logic Controller (PLC) for use in Nuclear Power Plant safety-related applications is being developed and tested first time in Korea. This safety-related PLC is being developed with requirements of regulatory guideline and industry standards for safety system. To test that the quality of the developed PLC is sufficient to be used in safety critical system, document review and various product testings were performed over the development documents for S/W, H/W, and V/V. This paper provides the performance testing methodology and its effectiveness for PLC platform conducted by KOPEC

Test-Anchored Vibration Response Predictions for an Acoustically Energized Curved Orthogrid Panel with Mounted Components

Science.gov (United States)

Frady, Gregory P.; Duvall, Lowery D.; Fulcher, Clay W. G.; Laverde, Bruce T.; Hunt, Ronald A.

2011-01-01

rich body of vibroacoustic test data was recently generated at Marshall Space Flight Center for component-loaded curved orthogrid panels typical of launch vehicle skin structures. The test data were used to anchor computational predictions of a variety of spatially distributed responses including acceleration, strain and component interface force. Transfer functions relating the responses to the input pressure field were generated from finite element based modal solutions and test-derived damping estimates. A diffuse acoustic field model was applied to correlate the measured input sound pressures across the energized panel. This application quantifies the ability to quickly and accurately predict a variety of responses to acoustically energized skin panels with mounted components. Favorable comparisons between the measured and predicted responses were established. The validated models were used to examine vibration response sensitivities to relevant modeling parameters such as pressure patch density, mesh density, weight of the mounted component and model form. Convergence metrics include spectral densities and cumulative root-mean squared (RMS) functions for acceleration, velocity, displacement, strain and interface force. Minimum frequencies for response convergence were established as well as recommendations for modeling techniques, particularly in the early stages of a component design when accurate structural vibration requirements are needed relatively quickly. The results were compared with long-established guidelines for modeling accuracy of component-loaded panels. A theoretical basis for the Response/Pressure Transfer Function (RPTF) approach provides insight into trends observed in the response predictions and confirmed in the test data. The software developed for the RPTF method allows easy replacement of the diffuse acoustic field with other pressure fields such as a turbulent boundary layer (TBL) model suitable for vehicle ascent. Structural responses

Antinuclear antibody panel

Science.gov (United States)

... page: //medlineplus.gov/ency/article/003535.htm Antinuclear antibody panel To use the sharing features on this page, please enable JavaScript. The antinuclear antibody panel is a blood test that looks at ...

Hepatitis virus panel

Science.gov (United States)

... page: //medlineplus.gov/ency/article/003558.htm Hepatitis virus panel To use the sharing features on this page, please enable JavaScript. The hepatitis virus panel is a series of blood tests used ...

The Northern regional programme for the acceptance testing of X-ray equipment

International Nuclear Information System (INIS)

Faulkner, K.; Harrison, R.M.; Kotre, C.J.; Smith, S.; Davies, M.; Barker, P.

1989-01-01

Since 1984 the UK Northern Regional Medical Physics Department has participated in a regional acceptance testing programme for all X-ray equipment from mobile units to computed tomography scanners. Organizational and radiation physics aspects of the programme are described. Three levels of tests are performed by physicists: the first on installation, the second after 3 months, the final visit just prior to the end of the manufacturers warranty. The second test is only performed if any aspect of performance requires rechecking as a result of the first. Acceptance test protocols are based on those published by the Institute of Physical Sciences in Medicine. Details limiting values for the acceptance test measurements are given. In some instances testing has resulted in modifications to the design and construction of X-ray equipment. Acceptance testing is important in determining a baseline standard of performance against which routine quality assurance may be assessed. (author)

Initiation of depleted uranium oxide and spent fuel testing for the spent fuel sabotage aerosol ratio programme

International Nuclear Information System (INIS)

Molecke, M.A.; Gregson, M.W.; Sorenson, K.B.

2004-01-01

We provide a detailed overview of an on-going, multinational test programme that is developing aerosol data for some spent fuel sabotage scenarios on spent fuel transport and storage casks. Experiments are being performed to quantify the aerosolised materials plus volatilised fission products generated from actual spent fuel and surrogate material test rods, due to impact by a high-energy/density device. The programme participants in the United States plus Germany, France and the United Kingdom, part of the international Working Group for Sabotage Concerns of Transport and Storage Casks (WGSTSC) have strongly supported and coordinated this research programme. Sandia National Laboratories has the lead role for conducting this research programme; test programme support is provided by both the US Department of Energy and the US Nuclear Regulatory Commission. We provide a summary of the overall, multiphase test design and a description of all explosive containment and aerosol collection test components used. We focus on the recently initiated tests on 'surrogate' spent fuel, unirradiated depleted uranium oxide and forthcoming actual spent fuel tests. We briefly summarise similar results from completed surrogate tests that used non-radioactive, sintered cerium oxide ceramic pellets in test rods. (author)

Quality assurance for HIV point-of-care testing and treatment monitoring assays

Directory of Open Access Journals (Sweden)

Adrienne F.A. Meyers

2016-10-01

Full Text Available In 2015, UNAIDS launched the 90-90-90 targets aimed at increasing the number of peopleinfected with HIV to become aware of their status, access antiretroviral therapies and ultimatelybe virally suppressed. To achieve these goals, countries may need to scale up point-of-care (POC testing in addition to strengthening central laboratory services. While decentralisingtesting increases patient access to diagnostics, it presents many challenges with regard totraining and assuring the quality of tests and testing. To ensure synergies, the London Schoolof Hygiene & Tropical Medicine held a series of consultations with countries with an interestin quality assurance and their implementing partners, and agreed on an external qualityassessment (EQA programme to ensure reliable results so that the results lead to the bestpossible care for HIV patients. As a result of the consultations, EQA International wasestablished, bringing together EQA providers and implementers to develop a strategic planfor countries to establish national POC EQA programmes and to estimate the cost of setting upand maintaining the programme. With the dramatic increase in the number of proficiencytesting panels required for thousands of POC testing sites across Africa, it is important tofacilitate technology transfer from global EQA providers to a network of regional EQA centresin Africa for regional proficiency testing panel production. EQA International will continue toidentify robust and cost-effective EQA technologies for quality POC testing, integrating noveltechnologies to support sustainable country-owned EQA programmes in Africa.

The Impact of MBA Programme Attributes on Post-MBA Salaries

OpenAIRE

Elliott, Caroline; Soo, Kwok Tong

2016-01-01

This paper explores the impact of various MBA programme attributes on the average post-MBA salary of graduates, contributing to the literature on the returns to an MBA degree, which to date has instead focused predominantly on the impact of individual student traits. The analysis uses a new panel dataset, comprising MBA programmes from across the world. Results indicate that pre-MBA salary and quality rank of programme are key determinants of post-MBA salary.

Electrical design for origami solar panels and a small spacecraft test mission

Science.gov (United States)

Drewelow, James; Straub, Jeremy

2017-05-01

Efficient power generation is crucial to the design of spacecraft. Mass, volume, and other limitations prevent the use of traditional spacecraft support structures from being suitable for the size of solar array required for some missions. Folding solar panel / panel array systems, however, present a number of design challenges. This paper considers the electrical design of an origami system. Specifically, it considers how to provide low impedance, durable channels for the generated power and the electrical aspects of the deployment system and procedure. The ability to dynamically reconfigure the electrical configuration of the solar cells is also discussed. Finally, a small satellite test mission to demonstrate the technology is proposed, before concluding.

Verification test for helium panel of cryopump for DIII-D advanced divertor

International Nuclear Information System (INIS)

Baxi, C.B.; Laughon, G.J.; Langhorn, A.R.; Schaubel, K.M.; Smith, J.P.; Gootgeld, A.M.; Campbell, G.L.; Menon, M.M.

1992-01-01

It is planned to install a cryogenic pump in the lower divertor portion of the DIII-D tokamak with a pumping speed of 50000 ell/s and an exhaust of 2670 Pa-ell/s (20 Torr-ell/s). A coaxial counter flow configuration has been chosen for the helium panel of this cryogenic pump. This paper evaluates cool-down rates and fluid stability of this configuration. A prototypic test was performed at General Atomics (GA) to increase confidence in the design. It was concluded that the helium panel cooldown rate agreed quite well with analytical prediction and was within acceptable limits. The design flow rate proved stable and two-phase pressure drop can be predicted quite accurately

Quality assurance for HIV point-of-care testing and treatment monitoring assays

Science.gov (United States)

Sandstrom, Paul; Denny, Thomas N.; Hurlston, Mackenzie; Ball, Terry B.; Peeling, Rosanna W.; Boeras, Debrah I.

2016-01-01

In 2015, UNAIDS launched the 90-90-90 targets aimed at increasing the number of people infected with HIV to become aware of their status, access antiretroviral therapies and ultimately be virally suppressed. To achieve these goals, countries may need to scale up point-of-care (POC) testing in addition to strengthening central laboratory services. While decentralising testing increases patient access to diagnostics, it presents many challenges with regard to training and assuring the quality of tests and testing. To ensure synergies, the London School of Hygiene & Tropical Medicine held a series of consultations with countries with an interest in quality assurance and their implementing partners, and agreed on an external quality assessment (EQA) programme to ensure reliable results so that the results lead to the best possible care for HIV patients. As a result of the consultations, EQA International was established, bringing together EQA providers and implementers to develop a strategic plan for countries to establish national POC EQA programmes and to estimate the cost of setting up and maintaining the programme. With the dramatic increase in the number of proficiency testing panels required for thousands of POC testing sites across Africa, it is important to facilitate technology transfer from global EQA providers to a network of regional EQA centres in Africa for regional proficiency testing panel production. EQA International will continue to identify robust and cost-effective EQA technologies for quality POC testing, integrating novel technologies to support sustainable country-owned EQA programmes in Africa. PMID:28879133

PERBANDINGAN UNJUK KERJA ANTARA PANEL SEL SURYA BERPENJEJAK DENGAN PANEL SEL SURYA DIAM

Directory of Open Access Journals (Sweden)

Syafaruddin Ch

2010-07-01

Full Text Available The ability to produce electrical energy at Solar Power Plant  is highly dependent on the magnitude and duration of sun exposure on the solar cell panels. The movement of the sun from east to west that periodicity in every day is a problem at  the  optimization generation of electricity at  Solar Power Plant   if using solar panel that motionless. This is because the solar cell panel can not catch the maximum sun exposure. To solve the above problem then designed a solar cell panel  tracker  capable of follo-wing the movements of the sun. Then conducted a test to see the performance of solar cell pa-nel  tracker  and compare it with the performance of solar cell panel was motionless. The testing doing along 6 days, with way to irradiate the panel of solar cells  tracker  and panels of solar cell motionless with sun exposure  along a  full day. Then the electric current generated each panel were recorded. The comparison of current then generating comparison of electric power delivery. The result show that the solar cell panel  tracker  produce the average current is 2.19 A whereas solar-cell panel still 1.97 A.  This result   indicate that average power for solar cell panel  tracker  39.41 W while for solar cell panel that motionless is  35.46 W. These results indicate that the performance of solar cell panel  tracker  better than  solar cell panel motionless.

Evaluation of the Community's nuclear reactor safety research programme

International Nuclear Information System (INIS)

Brandstetter, A.; Goedkoop, J.A.; Jaumotte, A.; Malhouitre, G.; Tomkins, B.; Zorzoli, G.B.

1986-01-01

This report describes an evaluation of the 1980-85 CEC reactor safety programme prepared, at the invitation of the Commission, by a panel of six independent experts by means of examining the relevant document and by holding hearings with the responsible CEC staff. It contains the recommendations made by the panel on the following topics: the need for the JRC to continue to make its competence in the reactor safety field available to the Community; the importance of continuity in the JRC and shared-cost action programmes; the difficulty of developing reactor safety research programmes which satisfy the needs of users with diverse needs; the monitoring of the utilization of the research results; the maintenance of the JRC computer codes used by the Member States; the spin-off from research results being made available to other industrial sectors; the continued contact between the JRC researchers and the national experts; the coordination of LWR safety research with that of the Member States; and, the JRC work on fast breeders to be planned with regard to the R and D programmes of the Fast Reactor European Consortium

A dedicated BI-RADS training programme: Effect on the inter-observer variation among screening radiologists

International Nuclear Information System (INIS)

Timmers, J.M.H.; Doorne-Nagtegaal, H.J. van; Verbeek, A.L.M.; Heeten, G.J. den; Broeders, M.J.M.

2012-01-01

Introduction: The Breast Imaging Reporting and Data System (BI-RADS) was introduced in the Dutch breast cancer screening programme to improve communication between medical specialists. Following introduction, a substantial variation in the use of the BI-RADS lexicon for final assessment categories was noted among screening radiologists. We set up a dedicated training programme to reduce this variation. This study evaluates whether this programme was effective. Materials and methods: Two comparable test sets were read before and after completion of the training programme. Each set contained 30 screening mammograms of referred women selected from screening practice. The sets were read by 25 experienced and 30 new screening radiologists. Cohen's kappa (κ) was used to calculate the inter-observer agreement. The BI-RADS 2003 version was implemented in the screening programme as the BI-RADS 2008 version requires the availability of diagnostic work-up, and this is unavailable. Results: The inter-observer agreement of all participating radiologists (n = 55) with the expert panel increased from a pre-training κ-value of 0.44 to a post-training κ-value of 0.48 (p = 0.14). The inter-observer agreement of the new screening radiologists (n = 30) with the expert panel increased from κ = 0.41 to κ = 0.50 (p = 0.01), whereas there was no difference in agreement among the 25 experienced radiologists (from κ = 0.48 to κ = 0.46, p = 0.60). Conclusion: Our training programme in the BI-RADS lexicon resulted in a significant improvement of agreement among new screening radiologists. Overall, the agreement among radiologists was moderate (guidelines Landis and Koch). This is in line with results found in the literature

Expanding the genotype-phenotype spectrum in hereditary colorectal cancer by gene panel testing

DEFF Research Database (Denmark)

Rohlin, Anna; Rambech, Eva; Kvist, Anders

2017-01-01

Hereditary syndromes causing colorectal cancer include both polyposis and non-polyposis syndromes. Overlapping phenotypes between the syndromes have been recognized and this make targeted molecular testing for single genes less favorable, instead there is a gaining interest for multi-gene panel...

An overview of the fuels and materials testing programme at the OECD Halden Reactor Project

Energy Technology Data Exchange (ETDEWEB)

Wiesenack, W [Institutt for Energiteknikk, Halden (Norway). OECD Halden Reaktor Projekt

1997-08-01

The fuels and materials testing programme of the OECD Halden Reactor Project is aimed at investigations of fuel and cladding properties at high burnup, water chemistry effects and in-core materials ageing problems. For the execution of this programme, different types of irradiation rigs and experimental facilities providing typical power reactors conditions are available. Data are obtained from in-core sensors developed at the Halden Project; these are shortly described. An overview of the current test programme and the scope of the following years are briefly presented. (author). 5 refs, 3 figs.

Plasma Panel Detectors for MIP Detection for the SLHC and a Test Chamber Design

CERN Document Server

Ball, Robert; Etzion, Erez; Friedman, Peter S; Levin, Daniel S; Moshe, Meny Ben; Weaverdyck, Curtis; Zhou, Bing

2010-01-01

Performance demands for high and super-high luminosity at the LHC (up to 10^35 cm^(-2) sec^(-1) after the 2017 shutdown) and at future colliders demand high resolution tracking detectors with very fast time response and excellent temporal and spatial resolution. We are investigating a new radiation detector technology based on Plasma Display Panels (PDP), the underlying engine of panel plasma television displays. The design and production of PDPs is supported by four decades of industrial development. Emerging from this television technology is the Plasma Panel Sensor (PPS), a novel variant of the micropattern radiation detector. The PPS is fundamentally an array of micro-Geiger plasma discharge cells operating in a non-ageing, hermetically sealed gas mixture . We report on the PPS development program, including design of a PPS Test Cell.

Laboratory Testing of Precast Bridge Beck Panel Transverse Connections for Use in Accelerated Bridge Construction

OpenAIRE

Porter, Scott D.

2009-01-01

Precast concrete bridge deck panels have been used for decades to accelerate bridge construction. Cracking of the transverse connection between panels is a common problem that can damage deck overlays and cause connection leaking leading to corrosion of lower bridge elements. To better understand the behavior of bridge deck transverse female-to-female connections, shear and moment lab testing were performed at Utah State University for the Utah Department of Transportation. Two existing UDOT ...

A Panel Cointegration Analysis: Thailand’s International Tourism Demand Model

OpenAIRE

Prasert Chaitip; Chukiat Chaiboonsri

2009-01-01

This paper sought to find the long-run relationships between international tourist arrivals in Thailand and economic variables such as GDP, cost of transportation and exchange rates for the period 1986 to 2007. Also this paper used five standard panel unit root tests such as LLC (2002) panel unit root test, Breitung (2000) panel unit root test, IPS (2003) panel unit root test, Maddala and Wu (1999), Choi (2001) panel unit root test, Handri (1999) panel unit root test. Moreover, the panel coin...

Indonesia's Domestic Biogas Programme – Household panel survey data

NARCIS (Netherlands)

Bedi, Arjun S.; Sparrow, Robert; Tasciotti, Luca

2018-01-01

The data presented in this article are related to the research paper titled, “The impact of a household biogas programme on energy use and expenditure in East Java” (A.S. Bedi, R. Sparrow, L. Tasciotti, 2017) [1]. This Data in Brief article presents two rounds of survey data conducted in 2011 and

Validation of programmable industrial automation systems for safety critical applications in NPP's; dynamic testing

International Nuclear Information System (INIS)

Haapanen, P.; Korhonen, J.

1995-01-01

The safety assessment of programmable automation systems cannot be totally be based on conventional probabilistic methods because of the difficulties in quantification of the reliability of the software as well as the hardware. Additional means shall therefore be used to gain more confidence on the system dependability. One central confidence building measure is the independent dynamic testing of the completed system. An automated test harness is needed to run the required large amount of test cases in a restricted time span. This paper describes a prototype dynamic testing harness for programmable digital systems developed at VTT. (author). 12 refs, 2 figs, 2 tabs

F-15B in on ramp with close-up of test panels covered with advanced spray-on foam insulation materia

Science.gov (United States)

1999-01-01

Test panels covered with an advanced foam insulation material for the Space Shuttle's giant external fuel tank were test flown aboard an F-15B research aircraft at NASA's Dryden Flight Research Center, Edwards, Calif. Six panels were mounted on the left side of a heavily instrumented Flight Text Fixture mounted underneath the F-15B's fuselage. Insulation on this panel was finely machined over a horizontal rib structure to simulate in-line airflow past the tank; other panels had the ribs mounted vertically or had the insulation left in a rough as-sprayed surface. The tests were part of an effort by NASA's Marshall Space Flight Center to determine why small particles of the new insulation flaked off the tank on recent Shuttle missions. The tests with Dryden's F-15B were designed to replicate the pressure environment the Shuttle encounters during the first minute after launch. No noticeable erosion of the insulation material was noted after the flight experiment at Dryden.

Verification test for helium panel of cryopump for DIII-D advanced divertor

International Nuclear Information System (INIS)

Baxi, C.B.; Laughon, G.J.; Langhorn, A.R.; Schaubel, K.M.; Smith, J.P.; Gootgeld, A.M.; Campbell, G.L.; Menon, M.M.

1991-10-01

It is planned to install a cryogenic pump in the lower divertor portion of the D3-D tokamak with a pumping speed of 50000 ell/s and an exhaust of 2670 Pa-ell/s (20 Torr-ell s). A coaxial counter flow configuration has been chosen for the helium panel of this cryogenic pump. This paper evaluates cooldown rates and fluid stability of this configuration. A prototypic test was performed at General Atomics (GA) to increase confidence in the design. It was concluded that the helium panel cooldown rate agreed quite well with analytical prediction and was within acceptable limits. The design flow rate proved stable and two-phase pressure drop can be predicted quite accurately. 8 refs., 5 figs., 1 tab

Round robin test programmes in the reliability of thick section ultrasonic inspections: state of the art report

International Nuclear Information System (INIS)

Watkins, B.

1987-03-01

Inspection reliability is firstly defined and it is shown how difficult it is to be assessed as the influence of such factors as human performance, equipment malfunction and intrinsic technique capability are difficult to quantify. The manufacture of round robin test specimens is then considered: types of flaw, fabrication of test samples. The results of various round robin test programmes that have been carried out to determine both the capability and reliability of NDE to detect and size flaws in steel section for thick sections directly relevant to the requirements of the nuclear industry, are then reviewed and discussed: US Pressure Vessel research committee programme, PISC I Programme, the defect detection trials, and PISC II Programme

Processing of Low-Grade Uranium Ores. Proceedings of a Panel

Energy Technology Data Exchange (ETDEWEB)

NONE

1967-06-15

Proceedings of a panel convened by the IAEA in Vienna, 27 June - 1 July 1966. The 22 specialists from 15 countries and one international organization who attended the meeting were asked to give an appraisal of the current situation with regard to the processing of low-grade uranium ores and make recommendations for a possible IAEA programme of activities. This publication covers the work of the panel. Contents: Status reports (13 reports); Technical reports (13 reports); Summaries of discussions; Recommendations of the panel. Each report is in its original language (16 English, 4 French, 2 Russian and 4 Spanish) and each technical report is preceded by an abstract in English and one in the original language if this is not English. The summaries of discussions and the panel recommendations are in English. (author)

A new checkerboard panel for testing bacterial markers in periodontal disease.

Science.gov (United States)

Dahlén, G; Leonhardt, A

2006-02-01

Various microbiological methods have been used for testing bacterial markers for periodontitis and periodontal disease progression. Most studies have used only a limited number of well recognized bacterial species. The purpose of the present study was to evaluate the association of 13 more recently identified bacterial species in a new panel in comparison with 12 previously more recognized periodontotopathogens ('old panel') using the 'checkerboard' DNA-DNA hybridization method. Fifty individuals were chosen who showed at least one site with a probing pocket depth of 6 mm or more (disease) and bleeding on probing and at least one site with a probing pocket depth of 3 mm and without bleeding on probing (health). One diseased and one healthy site on each individual were sampled with the paperpoint technique and the samples were processed in the checkerboard technique against deoxigenin-labeled whole genomic probes to 25 subgingival species representing 12 well recognized and 13 newly identified periodontitis associated species. Twenty-four (out of 25) species were detected more frequently in the subgingival plaque of diseased than healthy sites both at score 1 (> 10(4)) and score 3 (> 10(5)). A significant difference at the higher score (score 3) was noticed for all species of the old panel except for three (Streptococcus intermedius, Selenomonas noxia, and Eikenella corrodens). Of the species in the new panel only Prevotella tannerae, Filifactor alocis, and Porphyromonas endodontalis showed a statistical significant difference between diseased and healthy sites. It was concluded that P. tannerae, F. alocis, and P. endodontalis should be added to the 12 species used for routine diagnostics of periodontitis-associated bacterial flora.

Lap Shear Testing of Candidate Radiator Panel Adhesives

Science.gov (United States)

Ellis, David; Briggs, Maxwell; McGowan, Randy

2013-01-01

During testing of a subscale radiator section used to develop manufacturing techniques for a full-scale radiator panel, the adhesive bonds between the titanium heat pipes and the aluminum face sheets failed during installation and operation. Analysis revealed that the thermal expansion mismatch between the two metals resulted in relatively large shear stresses being developed even when operating the radiator at moderate temperatures. Lap shear testing of the adhesive used in the original joints demonstrated that the two-part epoxy adhesive fell far short of the strength required. A literature review resulted in several candidate adhesives being selected for lap shear joint testing at room temperature and 398 K, the nominal radiator operating temperature. The results showed that two-part epoxies cured at room and elevated temperatures generally did not perform well. Epoxy film adhesives cured at elevated temperatures, on the other hand, did very well with most being sufficiently strong to cause yielding in the titanium sheet used for the joints. The use of an epoxy primer generally improved the strength of the joint. Based upon these results, a new adhesive was selected for the second subscale radiator section.

New evidence on the convergence of per capita carbon dioxide emissions from panel seemingly unrelated regressions augmented Dickey-Fuller tests

International Nuclear Information System (INIS)

Lee, Chien-Chiang; Chang, Chun-Ping

2008-01-01

Using the data for per capita carbon dioxide (CO 2 ) emissions relative to the average per capita emissions for 21 countries in the organisation for economic co-operation and development (OECD) covering the period 1960-2000, this paper seeks to determine whether the stochastic convergence and β-convergence of CO 2 emissions are supported in countries with the same level of development. In other words, are shocks to relative per capita CO 2 emissions temporary in industrialized countries? We respond to this question by utilizing Breuer et al.'s [Breuer JB, McNown R, Wallace MS. Misleading inferences from panel unit-root tests with an illustration from purchasing power parity. Review of International Economics 2001;9(3):482-93; Breuer JB, McNown R, Wallace MS. Series-specific unit-root tests with panel data. Oxford Bulletin of Economics and Statistics 2002 64(5):527-46] panel seemingly unrelated regressions augmented Dickey-Fuller (SURADF) unit-root tests, which allow us to account for possible cross-sectional effects and to identify how many and which members of the panel contain a unit root. Our empirical findings provide evidence that relative per capita CO 2 emissions in OECD countries are a mixture of I(0) and I(1) processes, in which 14 out of 21 OECD countries exhibit divergence. The results reveal that conventional panel unit-root tests can lead to misleading inferences biased towards stationarity even if only one series in the panel is strongly stationary. (author)

Investigation of Energy Absorption in Aluminum Foam Sandwich Panels By Drop Hammer Test: Experimental Results

Directory of Open Access Journals (Sweden)

Mohammad Nouri Damghani

2016-05-01

Full Text Available The sandwich panel structures with aluminum foam core and metal surfaces have light weight with high performance in dispersing energy. This has led to their widespread use in the absorption of energy. The cell structure of foam core is subjected to plastic deformation in the constant tension level that absorbs a lot of kinetic energy before destruction of the structure. In this research, by making samples of aluminum foam core sandwich panels with aluminum surfaces, experimental tests of low velocity impact by a drop machine are performed for different velocities and weights of projectile on samples of sandwich panels with aluminum foam core with relative density of 18%, 23%, and 27%. The output of device is acceleration‐time diagram which is shown by an accelerometer located on the projectile. From the experimental tests, the effect of weight, velocity and energy of the projectile and density of the foam on the global deformation, and energy decrease rate of projectile have been studied. The results of the experimental testes show that by increasing the density of aluminum foam, the overall impression is reduced and the slop of energy loss of projectile increases. Also by increasing the velocity of the projectile, the energy loss increases.

Validation of programmable industrial automation systems for safety critical applications in NPP's dynamic testing

International Nuclear Information System (INIS)

Haapanen, P.; Korhonen, J.

1995-01-01

The safety assessment of programmable automation systems can not totally be based on conventional probabilistic methods because of the difficulties in quantification of the reliability of the software as well as the hardware. Additional means shall therefore be used to gain more confidence on the system dependability. One central confidence building measure is the independent dynamic testing of the completed system. An automated test harness is needed to run the required large amount of test cases in a restricted time span. The prototype dynamic testing harness for programmable digital systems developed at the Technical Research Centre of Finland (VTT) is described in the presentation. (12 refs., 2 figs., 2 tabs.)

Processing of Low-Grade Uranium Ores. Proceedings of a Panel

International Nuclear Information System (INIS)

1967-01-01

The 22 specialists from 15 countries and one international organization who attended the meeting were asked to give an appraisal of the current situation with regard to the processing of low-grade uranium ores and make recommendations for a possible IAEA programme of activities. This publication covers the work of the panel. Contents: Status reports (13 reports); Technical reports (13 reports); Summaries of discussions; Recommendations of the panel. Each report is in its original language (16 English, 4 French, 2 Russian and 4 Spanish) and each technical report is preceded by an abstract in English and one in the original language if this is not English. The summaries of discussions and the panel recommendations are in English. (author)

Processing of Low-Grade Uranium Ores. Proceedings of a Panel

Energy Technology Data Exchange (ETDEWEB)

NONE

1967-06-15

The 22 specialists from 15 countries and one international organization who attended the meeting were asked to give an appraisal of the current situation with regard to the processing of low-grade uranium ores and make recommendations for a possible IAEA programme of activities. This publication covers the work of the panel. Contents: Status reports (13 reports); Technical reports (13 reports); Summaries of discussions; Recommendations of the panel. Each report is in its original language (16 English, 4 French, 2 Russian and 4 Spanish) and each technical report is preceded by an abstract in English and one in the original language if this is not English. The summaries of discussions and the panel recommendations are in English. (author)

Multiple Site Damage in Flat Panel Testing

National Research Council Canada - National Science Library

Shrage, Daniel

2000-01-01

This report aimed to experimentally verify analytical models that predict the residual strength of representative aircraft structures, such as wide panels, that are subjected to Multiple Site Damage (MSD...

Wide Panel Testing Technique for Evaluating Repair Weld Strengths

Science.gov (United States)

Rogers, Patrick R.; Bynum, Julian E.; Shah, Sandeep R.

1998-01-01

This paper describes a new tensile testing technique for evaluating the overall effect of a repair weld on the strength of a welded joint. Previously, repair weld strengths have been evaluated using one-inch width tensile specimens, but this technique does not capture all of the effects that result from a repair. The new technique involves testing of "wide panel" tensile specimens which contain the full length of a repair weld within a longer initial weld, allowing the specimen to capture the combined effects of residual stresses, local strength degradation, and load redistribution around a repair. The development of strains in the repair area of standard aluminum alloy specimens and new high-performance aluminum-lithium alloy specimens was observed and evaluated using photoelastic material. The results of this evaluation show an increased sensitivity to repair welding residual stresses in the aluminum-lithium alloy specimens.

Neutron radiography in Indian space programme

International Nuclear Information System (INIS)

Viswanathan, K.

1999-01-01

Pyrotechnic devices are indispensable in any space programme to perform such critical operations as ignition, stage separation, solar panel deployment, etc. The nature of design and configuration of different types of pyrotechnic devices, and the type of materials that are put in their construction make the inspection of them with thermal neutrons more favourable than any other non destructive testing methods. Although many types of neutron sources are available for use, generally the radiographic quality/exposure duration and cost of source run in opposite directions even after four decades of research and development. But in the area of space activity, by suitably combining the X-ray and neutron radiographic requirements, the inspection of the components can be made economically viable. This is demonstrated in the Indian space programme by establishing a 15 MeV linear accelerator based neutron generator facility to inspect medium to giant solid propellant boosters by X-ray inspection and all types of critical pyro and some electronic components by neutron radiography. Since the beam contains unacceptable gamma, transfer imaging technique has been evolved and the various parameters have been optimised to get a good quality image

Patient experience of CT colonography and colonoscopy after fecal occult blood test in a national screening programme

OpenAIRE

Plumb, Andrew A.; Ghanouni, Alex; Rees, Colin J.; Hewitson, Paul; Nickerson, Claire; Wright, Suzanne; Taylor, Stuart A.; Halligan, Steve; von Wagner, Christian

2016-01-01

Objective To investigate patient experience of CT colonography (CTC) and colonoscopy in a national screening programme. Methods Retrospective analysis of patient experience postal questionnaires. We included screenees from a fecal occult blood test (FOBt) based screening programme, where CTC was performed when colonoscopy was incomplete or deemed unsuitable. We analyzed questionnaire responses concerning communication of test risks, test-related discomfort and post-test pain, as well as compl...

Patient experience of CT colonography and colonoscopy after fecal occult blood test in a national screening programme

OpenAIRE

Plumb, A. A.; Ghanouni, A.; Rees, C. J.; Hewitson, P.; Nickerson, C.; Wright, S.; Taylor, S. A.; Halligan, S.; von Wagner, C.

2017-01-01

OBJECTIVE: To investigate patient experience of CT colonography (CTC) and colonoscopy in a national screening programme. METHODS: Retrospective analysis of patient experience postal questionnaires. We included screenees from a fecal occult blood test (FOBt) based screening programme, where CTC was performed when colonoscopy was incomplete or deemed unsuitable. We analyzed questionnaire responses concerning communication of test risks, test-related discomfort and post-test pain, as well as com...

Extension of the ACE solar panels is tested in SAEF-II

Science.gov (United States)

1997-01-01

Extension of the solar panels is tested on the Advanced Composition Explorer (ACE) spacecraft in KSC's Spacecraft Assembly and Encapsulation Facility-II (SAEF-II). Scheduled for launch on a Delta II rocket from Cape Canaveral Air Station on Aug. 25, ACE will study low-energy particles of solar origin and high-energy galactic particles. The collecting power of instruments aboard ACE is 10 to 1,000 times greater than anything previously flown to collect similar data by NASA.

Incidence of interval cancers in faecal immunochemical test colorectal screening programmes in Italy.

Science.gov (United States)

Giorgi Rossi, Paolo; Carretta, Elisa; Mangone, Lucia; Baracco, Susanna; Serraino, Diego; Zorzi, Manuel

2018-03-01

Objective In Italy, colorectal screening programmes using the faecal immunochemical test from ages 50 to 69 every two years have been in place since 2005. We aimed to measure the incidence of interval cancers in the two years after a negative faecal immunochemical test, and compare this with the pre-screening incidence of colorectal cancer. Methods Using data on colorectal cancers diagnosed in Italy from 2000 to 2008 collected by cancer registries in areas with active screening programmes, we identified cases that occurred within 24 months of negative screening tests. We used the number of tests with a negative result as a denominator, grouped by age and sex. Proportional incidence was calculated for the first and second year after screening. Results Among 579,176 and 226,738 persons with negative test results followed up at 12 and 24 months, respectively, we identified 100 interval cancers in the first year and 70 in the second year. The proportional incidence was 13% (95% confidence interval 10-15) and 23% (95% confidence interval 18-25), respectively. The estimate for the two-year incidence is 18%, which was slightly higher in females (22%; 95% confidence interval 17-26), and for proximal colon (22%; 95% confidence interval 16-28). Conclusion The incidence of interval cancers in the two years after a negative faecal immunochemical test in routine population-based colorectal cancer screening was less than one-fifth of the expected incidence. This is direct evidence that the faecal immunochemical test-based screening programme protocol has high sensitivity for cancers that will become symptomatic.

Residual Strength Pressure Tests and Nonlinear Analyses of Stringer- and Frame-Stiffened Aluminum Fuselage Panels with Longitudinal Cracks

Science.gov (United States)

Young, Richard D.; Rouse, Marshall; Ambur, Damodar R.; Starnes, James H., Jr.

1999-01-01

The results of residual strength pressure tests and nonlinear analyses of stringer- and frame-stiffened aluminum fuselage panels with longitudinal cracks are presented. Two types of damage are considered: a longitudinal crack located midway between stringers, and a longitudinal crack adjacent to a stringer and along a row of fasteners in a lap joint that has multiple-site damage (MSD). In both cases, the longitudinal crack is centered on a severed frame. The panels are subjected to internal pressure plus axial tension loads. The axial tension loads are equivalent to a bulkhead pressure load. Nonlinear elastic-plastic residual strength analyses of the fuselage panels are conducted using a finite element program and the crack-tip-opening-angle (CTOA) fracture criterion. Predicted crack growth and residual strength results from nonlinear analyses of the stiffened fuselage panels are compared with experimental measurements and observations. Both the test and analysis results indicate that the presence of MSD affects crack growth stability and reduces the residual strength of stiffened fuselage shells with long cracks.

1994 Panel 1 Utilization Plan

International Nuclear Information System (INIS)

1994-01-01

The Waste Isolation Pilot Plant (WIPP) is intended to receive, handle, and permanently dispose of transuranic (TRU) waste. To fulfill this mission, the U.S. Department of Energy (DOE) constructed a full-scale facility to demonstrate both technical and operational principles of the permanent isolation of TRU waste. The WIPP consists of surface and underground facilities. Panel 1 is situated in the underground facility horizon which is located approximately 2,150 feet below the surface in the predominantly halite Salado Formation. The Panel 1 Utilization Plan provides a strategy for the optimum use of Panel 1 which is consistent with the priorities established by the DOE to accomplish the WIPP mission. These priorities, which include maintaining personnel safety, conducting performance assessment, and continued operational enhancements, are the guiding premise for the decisions on the planned usage of the WIPP underground facility. The continuation of ongoing investigations along with the planned testing and training to be carried out in Panel 1 will enhance the current knowledge and understanding of the operational and geotechnical aspects of the panel configuration. This enhancement will ultimately lead to safer, more efficient, and more cost-effective methods of operation. Excavation of the waste storage area began in May 1986 with the mining of entries to Panel 1. The original design for the waste storage rooms at the WIPP provided a limited period of time during which to mine the openings and to emplace waste. Each panel, consisting of seven storage rooms, was scheduled to be mined and filled in less than 5 years. Panel 1 was developed to receive waste for a demonstration phase that was scheduled to start in October 1988. The demonstration phase was deferred, and the experimental test program was modified to use contact-handled (CH) transuranic waste in bin-scale tests, planned for Room 1, Panel 1

French safety and criticality testing programmes

International Nuclear Information System (INIS)

Barbry, F.; Leclerc, J.; Manaranche, J.C.; Maubert, L.

1982-01-01

This article underlines the need to include experimental safety-criticality programmes in the French nuclear effort. The means and methods used at the Section of Experimental Nuclear Safety and Criticality Research, attached to the CEA Valduc Centre, are described. Three experimental programmes are presented: safety-criticality of the PWR fuel cycle, neutron poisoning of plutonium solutions by gadolinium and safety-criticality of slightly enriched and slightly moderated uranium oxide. Criticality accidents studies in solution are then described [fr

Evaluation of farmed cod products by a trained sensory panel and consumers in different test settings

NARCIS (Netherlands)

Sveinsdottir, K.; Martinsdottir, E.; Thorsdottir, F.; Schelvis-Smit, A.A.M.; Kole, A.; Thorsdottir, I.

2010-01-01

Sensory characteristics of farmed cod exposed to low or conventional stress levels prior to slaughter were evaluated by a trained sensory panel. Consumers in two different settings, central location test (CLT) and home-use test (HUT), also tasted the products and rated them according to overall

Inspection qualification programme for VVER reactors and review of round robin test results

International Nuclear Information System (INIS)

Horacek, L.; Zdarek, J.

1998-01-01

Experience obtained, especially from in-service inspections of VVER 440-type reactor pressure vessels and from the Czech round test trials with international participation of ultrasonic teams, has highlighted the need for an in-service inspection qualification programme in the Czech Republic focused on NDT procedures, equipment and personnel. Recently, several national and international regional projects included in the PHARE programme (projects 4.1.2/93 and 1.02/94), briefly described, have been initiated. These projects are to cover step by step the programme of the in-service inspection qualification in view of technical justification as well as of practical assessment-performance demonstration-for all the main VVER-type primary circuit components. (orig.)

Application of complex programmable logic devices in memory radiation effects test system

International Nuclear Information System (INIS)

Li Yonghong; He Chaohui; Yang Hailiang; He Baoping

2005-01-01

The application of the complex programmable logic device (CPLD) in electronics is emphatically discussed. The method of using software MAX + plus II and CPLD are introduced. A new test system for memory radiation effects is established by using CPLD devices-EPM7128C84-15. The old test system's function are realized and, moreover, a number of small scale integrated circuits are reduced and the test system's reliability is improved. (authors)

NEPP Update of Independent Single Event Upset Field Programmable Gate Array Testing

Science.gov (United States)

Berg, Melanie; Label, Kenneth; Campola, Michael; Pellish, Jonathan

2017-01-01

This presentation provides a NASA Electronic Parts and Packaging (NEPP) Program update of independent Single Event Upset (SEU) Field Programmable Gate Array (FPGA) testing including FPGA test guidelines, Microsemi RTG4 heavy-ion results, Xilinx Kintex-UltraScale heavy-ion results, Xilinx UltraScale+ single event effect (SEE) test plans, development of a new methodology for characterizing SEU system response, and NEPP involvement with FPGA security and trust.

Properties of fly ash and metakaolín based geopolymer panels under fire resistance tests

Directory of Open Access Journals (Sweden)

Luna-Galiano, Y.

2015-09-01

Full Text Available This paper presents the results of a study about the effect of fire on geopolymer paste composed of fly ashes, metakaolin and sodium silicate. 2 cm thick, 28 cm high and 18 cm wide panels were filled with the paste obtained. After 28 days of curing at 20 °C and 45% of relative humidity, different tests were carried out in the geopolymers: physico-chemical (density, water absorption, porosity, mechanical (flexural and compressive strength, fire resistance and environmental (leaching and radioactivity. The panels manufactured have been compared with other commercial panels in order to determine the recycling possibilities of fly ashes in manufacturing new fire-insulating geopolymers. The panels obtained can be utilized for the production of interior wall materials, with a good physical, mechanical, fire resistant properties without any environmental problem.Este documento presenta los resultados de un estudio sobre el efecto del fuego sobre pastas de geopolímeros compuestas de cenizas volantes, metacaolín y silicato sódico. Con la pasta obtenida se han rellenado paneles de dimensiones 2 cm de espesor, 28 cm de altura y 18 cm de ancho. Tras 28 días de curado a 20 °C y un 45% de humedad relativa, diferentes ensayos fueron realizados en los geopolímeros obtenidos: fisicoquímicos (densidad, absorción de agua, porosidad, mecánicos (resistencia a compresión y a flexión, de resistencia al fuego y medioambientales (lixiviación y radioactividad. Los paneles fabricados han sido comparados con paneles comerciales para determinar las posibilidades de reciclaje de las cenizas volantes para la fabricación de nuevos productos geopoliméricos con propiedades aislantes al fuego. Los paneles obtenidos pueden ser utilizados para la producción de paredes interiores, con buenas propiedades físicas, mecánicas y de resistencia al fuego sin ningún problema medioambiental.

Advanced Solar Panel Designs

Science.gov (United States)

Ralph, E. L.; Linder, E. B.

1995-01-01

Solar panel designs that utilize new high-efficiency solar cells and lightweight rigid panel technologies are described. The resulting designs increase the specific power (W/kg) achievable in the near-term and are well suited to meet the demands of higher performance small satellites (smallsats). Advanced solar panel designs have been developed and demonstrated on two NASA SBIR contracts at Applied Solar. The first used 19% efficient, large area (5.5 cm x 6.5 cm) GaAs/Ge solar cells with a lightweight rigid graphite epoxy isogrid substrate configuration. A 1,445 sq cm coupon was fabricated and tested to demonstrate 60 W/kg with a high potential of achieving 80 W/kg. The second panel design used new 22% efficiency, dual-junction GaInP2/GaAs/Ge solar cells combined with a lightweight aluminum core/graphite fiber mesh facesheet substrate. A 1,445 sq cm coupon was fabricated and tested to demonstrate 105 W/kg with the potential of achieving 115 W/kg.

Panel fabrication utilizing GaAs solar cells

Science.gov (United States)

Mardesich, N.

1984-01-01

The development of the GaAs solar cells for space applications is described. The activities in the fabrication of GaAs solar panels are outlined. Panels were fabricated while introducing improved quality control, soldering laydown and testing procedures. These panels include LIPS II, San Marco Satellite, and a low concentration panel for Rockwells' evaluation. The panels and their present status are discussed.

Instrumental intelligent test of food sensory quality as mimic of human panel test combining multiple cross-perception sensors and data fusion.

Science.gov (United States)

Ouyang, Qin; Zhao, Jiewen; Chen, Quansheng

2014-09-02

Instrumental test of food quality using perception sensors instead of human panel test is attracting massive attention recently. A novel cross-perception multi-sensors data fusion imitating multiple mammal perception was proposed for the instrumental test in this work. First, three mimic sensors of electronic eye, electronic nose and electronic tongue were used in sequence for data acquisition of rice wine samples. Then all data from the three different sensors were preprocessed and merged. Next, three cross-perception variables i.e., color, aroma and taste, were constructed using principal components analysis (PCA) and multiple linear regression (MLR) which were used as the input of models. MLR, back-propagation artificial neural network (BPANN) and support vector machine (SVM) were comparatively used for modeling, and the instrumental test was achieved for the comprehensive quality of samples. Results showed the proposed cross-perception multi-sensors data fusion presented obvious superiority to the traditional data fusion methodologies, also achieved a high correlation coefficient (>90%) with the human panel test results. This work demonstrated that the instrumental test based on the cross-perception multi-sensors data fusion can actually mimic the human test behavior, therefore is of great significance to ensure the quality of products and decrease the loss of the manufacturers. Copyright © 2014 Elsevier B.V. All rights reserved.

Flight Test of a Technology Transparent Light Concentration Panel on SMEX/WIRE

Science.gov (United States)

Stern, Theodore G.; Lyons, John

2000-01-01

A flight experiment has demonstrated a modular solar concentrator that can be used as a direct substitute replacement for planar photovoltaic panels in spacecraft solar arrays. The Light Concentrating Panel (LCP) uses an orthogrid arrangement of composite mirror strips to form an array of rectangular mirror troughs that reflect light onto standard, high-efficiency solar cells at a concentration ratio of approximately 3:1. The panel area, mass, thickness, and pointing tolerance has been shown to be similar to a planar array using the same cells. Concentration reduces the panel's cell area by 2/3, which significantly reduces the cost of the panel. An opportunity for a flight experiment module arose on NASA's Small Explorer / Wide-Field Infrared Explorer (SMEX/WIRE) spacecraft, which uses modular solar panel modules integrated into a solar panel frame structure. The design and analysis that supported implementation of the LCP as a flight experiment module is described. Easy integration into the existing SMEX-LITE wing demonstrated the benefits of technology transparency. Flight data shows the stability of the LCP module after nearly one year in Low Earth Orbit.

Fatigue test of a fiberglass based composite panel. Increasing the lifetime of freight wagon

Science.gov (United States)

Sobek, M.; Baier, A.; Grabowski, Ł.; Majzner, M.

2016-08-01

In the XXI century transportation of goods plays a key role in the economy. Due to a good logistics the economy is able to grow fluently. Although land transportation is carried out mainly through trucks for the last several years there has been noted an increase in the percentage share of rail transport in the freight transport. The main goods transported by railways are mineral fuels, mining and quarrying products. They constitute the greater part of 70% of total transported goods. Transportation of material of such high weight, high hardness and with different shapes involves increased and accelerated wear and tear of the cargo space of the wagon. This process is also magnified by substances used to prevent overheating or goods theft. Usually they are in the form of chemical compounds powder, eg. Calcium. A very large impact on the wear of the freight wagons hull is made because of mechanical damage. Their source comes mostly from loading cargo with impetus and using heavy machines during unloading. A large number of cycles of loading and unloading during the working period causes abrasion of body and as a result after several years a wagon car qualifies for a major maintenance. Possibility of application composite panels in the process of renovating the wagons body could reduce the weight of whole train and prolong the service life between mandatory technical inspection. The Paper "Fatigue test of a fiberglass based composite panel. Increasing the lifetime of freight wagon" presents the research process and the results of the endurance test of the composite panel samples fixed to a metal plate. As a fixing method a stainless steel rivet nut and a stainless steel button head socket screws were chosen. Cyclic and multiple load were applied to test samples using a pneumatic cylinder. Such a methodology simulated the forces resulting from loading and unloading of the wagon and movement of the cargo during transport. In the study a dedicated stand equipped with a

Solar Panel based Milk Pasteurization

DEFF Research Database (Denmark)

Nielsen, Kirsten Mølgaard; Pedersen, Tom Søndergaard

This paper treats the subject of analysis, design and development of the control system for a solar panel based milk pasteurization system to be used in small villages in Tanzania. The analysis deals with the demands for an acceptable pasteurization, the varying energy supply and the low cost, low...... complexity, simple user interface and high reliability demands. Based on these demands a concept for the pasteurization system is established and a control system is developed. A solar panel has been constructed and the energy absorption has been tested in Tanzania. Based on the test, the pasteurization...... system is dimensioned. A functional prototype of the pasteurization facility with a capacity of 200 l milk/hour has been developed and tested. The system is prepared for solar panels as the main energy source and is ready for a test in Tanzania....

Solar Panel based Milk Pasteurization

DEFF Research Database (Denmark)

Nielsen, Kirsten Mølgaard; Pedersen, Tom Søndergaard

2002-01-01

This paper treats the subject of analysis, design and development of the control system for a solar panel based milk pasteurization system to be used in small villages in Tanzania. The analysis deals with the demands for an acceptable pasteurization, the varying energy supply and the low cost, low...... complexity, simple user interface and high reliability demands. Based on these demands a concept for the pasteurization system is established and a control system is developed. A solar panel has been constructed and the energy absorption has been tested in Tanzania. Based on the test, the pasteurization...... system is dimensioned. A functional prototype of the pasteurization facility with a capacity of 200 l milk/hour has been developed and tested. The system is prepared for solar panels as the main energy source and is ready for a test in Tanzania....

In-Situ Testing and Performance Assessment of a Redesigned WIPP Panel Closure - 13192

Energy Technology Data Exchange (ETDEWEB)

Klein, Thomas [URS-Professional Solutions, 4021 National Parks Highway Carlsbad, NM 88220 (United States); Patterson, Russell [Department of Energy-Carlsbad Field Office, 4021 National Parks Highway Carlsbad, NM 88220 (United States); Camphouse, Chris; Herrick, Courtney; Kirchner, Thomas; Malama, Bwalya; Zeitler, Todd [Sandia National Laboratories-Carlsbad, 4100 National Parks Highway Carlsbad, NM 88220 (United States); Kicker, Dwayne [SM Stoller Corporation-Carlsbad, 4100 National Parks Highway Carlsbad, NM (United States)

2013-07-01

operations and a greater understanding of the waste and the behavior of the underground salt formation, the DOE has established a revised panel closure design. This revised design meets both the short-term NMED Permit requirements for the operational period, and also the Federal requirements for long-term repository performance. This new design is simpler, easier to construct and has less of an adverse impact on waste disposal operations than the originally approved Option D design. The Panel Closure Redesign is based on: (1) the results of in-situ constructability testing performed to determine run-of-mine salt reconsolidation parameters and how the characteristics of the bedded salt formation affect these parameters and, (2) the results of air flow analysis of the new design to determine that the limit for the migration of Volatile Organic Compounds (VOCs) will be met at the compliance point. Waste panel closures comprise a repository feature that has been represented in WIPP performance assessment (PA) since the original Compliance Certification Application of 1996. Panel closures are included in WIPP PA models principally because they are a part of the disposal system, not because they play a substantive role in inhibiting the release of radionuclides to the outside environment. The 1998 rulemaking that certified WIPP to receive transuranic waste placed conditions on the panel closure design to be implemented in the repository. The revised panel closure design, termed the Run-of-Mine (ROM) Panel Closure System (ROMPCS), is comprised of 30.48 meters of ROM salt with barriers at each end. The ROM salt is generated from ongoing mining operations at the WIPP and may be compacted and/or moistened as it is emplaced in a panel entry. The barriers consist of bulkheads, similar to those currently used in the panels as room closures. A WIPP performance assessment has been completed that incorporates the ROMPCS design into the representation of the repository, and compares

Fabrication and Testing of Carbon Fiber, Graphite-Epoxy Panels for Submillimeter Telescope Use

Science.gov (United States)

Rieger, H.; Helwig, G.; Parks, R. E.; Ulich, B. L.

1983-12-01

An experimental carbon-fiber, graphite-epoxy, aluminum Flexcore sandwich panel roughly 1-m square was made by Dornier System, Friedrichshafen, West Germany. The panel was a pre-prototype of the panels to be used in the dish of the 10-m diameter Sub-Millimeter Telescope, a joint project of the Max-Planck-Institute fur Radioastronomie, Bonn, West Germany, and Steward Observatory, the University of Arizona in Tucson. This paper outlines the fabrication process for the panel and indicates the surface accuracy of the panel replication process. To predict the behavior of the panel under various environmental loads, the panel was modeled structurally using anisotropic elements for the core material. Results of this analysis along with experimental verification of these predictions are also given.

Tests on fast heating for the regeneration process of ITER cryopumps

International Nuclear Information System (INIS)

Day, C.; Kammerer, B.; Mack, A.

1996-10-01

Within the framework of the European Fusion Technology Programme, a primary vacuum pump for the ITER reactor is being developed. As the tritium accumulated by the pumps must be limited, short pumping cycles are necessary and as a consequence to that regeneration times of about 4 min only are required by the intermittently working cryopumps; approximately 60 s are available for the heating process from LHe temperature (4.2 K) to LN 2 temperature (77 K). Methods for fast heating were tested in component tests. The heating tests were performed at the TITAN test facility. According to the basic planning, the LHe-cooled panel consisted of seven flow channels in quilted design (500 x 350 mm 2 ); the detailed planning meanwhile showed that a smaller number of channels per panel will be sufficient. The panel was mounted in a LN 2 -cooled rig, which worked as first pumping stage. After having worked out a screening study comprehensive test series with three different heating methods were performed. (orig.) [de

Instrumental intelligent test of food sensory quality as mimic of human panel test combining multiple cross-perception sensors and data fusion

International Nuclear Information System (INIS)

Ouyang, Qin; Zhao, Jiewen; Chen, Quansheng

2014-01-01

Highlights: • To develop a novel instrumental intelligent test methodology for food sensory analysis. • A novel data fusion was used in instrumental intelligent test methodology. • Linear and nonlinear tools were comparatively used for modeling. • The instrumental test methodology can be imitative of human test behavior. - Abstract: Instrumental test of food quality using perception sensors instead of human panel test is attracting massive attention recently. A novel cross-perception multi-sensors data fusion imitating multiple mammal perception was proposed for the instrumental test in this work. First, three mimic sensors of electronic eye, electronic nose and electronic tongue were used in sequence for data acquisition of rice wine samples. Then all data from the three different sensors were preprocessed and merged. Next, three cross-perception variables i.e., color, aroma and taste, were constructed using principal components analysis (PCA) and multiple linear regression (MLR) which were used as the input of models. MLR, back-propagation artificial neural network (BPANN) and support vector machine (SVM) were comparatively used for modeling, and the instrumental test was achieved for the comprehensive quality of samples. Results showed the proposed cross-perception multi-sensors data fusion presented obvious superiority to the traditional data fusion methodologies, also achieved a high correlation coefficient (>90%) with the human panel test results. This work demonstrated that the instrumental test based on the cross-perception multi-sensors data fusion can actually mimic the human test behavior, therefore is of great significance to ensure the quality of products and decrease the loss of the manufacturers

Instrumental intelligent test of food sensory quality as mimic of human panel test combining multiple cross-perception sensors and data fusion

Energy Technology Data Exchange (ETDEWEB)

Ouyang, Qin; Zhao, Jiewen; Chen, Quansheng, E-mail: qschen@ujs.edu.cn

2014-09-02

Highlights: • To develop a novel instrumental intelligent test methodology for food sensory analysis. • A novel data fusion was used in instrumental intelligent test methodology. • Linear and nonlinear tools were comparatively used for modeling. • The instrumental test methodology can be imitative of human test behavior. - Abstract: Instrumental test of food quality using perception sensors instead of human panel test is attracting massive attention recently. A novel cross-perception multi-sensors data fusion imitating multiple mammal perception was proposed for the instrumental test in this work. First, three mimic sensors of electronic eye, electronic nose and electronic tongue were used in sequence for data acquisition of rice wine samples. Then all data from the three different sensors were preprocessed and merged. Next, three cross-perception variables i.e., color, aroma and taste, were constructed using principal components analysis (PCA) and multiple linear regression (MLR) which were used as the input of models. MLR, back-propagation artificial neural network (BPANN) and support vector machine (SVM) were comparatively used for modeling, and the instrumental test was achieved for the comprehensive quality of samples. Results showed the proposed cross-perception multi-sensors data fusion presented obvious superiority to the traditional data fusion methodologies, also achieved a high correlation coefficient (>90%) with the human panel test results. This work demonstrated that the instrumental test based on the cross-perception multi-sensors data fusion can actually mimic the human test behavior, therefore is of great significance to ensure the quality of products and decrease the loss of the manufacturers.

Comprehensive embryo testing. Experts' opinions regarding future directions: an expert panel study on comprehensive embryo testing.

Science.gov (United States)

Hens, Kristien; Dondorp, Wybo J; Geraedts, Joep P M; de Wert, Guido M

2013-05-01

What do scientists in the field of preimplantation genetic diagnosis (PGD) and preimplantation genetic screening (PGS) consider to be the future direction of comprehensive embryo testing? Although there are many biological and technical limitations, as well as uncertainties regarding the meaning of genetic variation, comprehensive embryo testing will impact the IVF/PGD practice and a timely ethical reflection is needed. Comprehensive testing using microarrays is currently being introduced in the context of PGD and PGS, and it is to be expected that whole-genome sequencing will also follow. Current ethical and empirical sociological research on embryo testing focuses on PGD as it is practiced now. However, empirical research and systematic reflection regarding the impact of comprehensive techniques for embryo testing is missing. In order to understand the potential of this technology and to be able to adequately foresee its implications, we held an expert panel with seven pioneers in PGD. We conducted an expert panel in October 2011 with seven PGD pioneers from Belgium, The Netherlands, Germany and the UK. Participants expected the use of comprehensive techniques in the context of PGD. However, the introduction of these techniques in embryo testing requires timely ethical reflection as it involves a shift from choosing an embryo without a particular genetic disease (i.e. PGD) or most likely to result in a successful pregnancy (i.e. PGS) to choosing the best embryo based on a much wider set of criteria. Such ethical reflection should take account of current technical and biological limitations and also of current uncertainties with regard to the meaning of genetic variance. However, ethicists should also not be afraid to look into the future. There was a general agreement that embryo testing will be increasingly preceded by comprehensive preconception screening, thus enabling smart combinations of genetic testing. The group was composed of seven participants from

Introducing new diagnostics into STI control programmes: the importance of programme science.

Science.gov (United States)

Peeling, Rosanna W; Mabey, David; Ballard, Ronald C

2013-03-01

Many innovative diagnostic technologies will become commercially available over the next 5-10 years. These tests can potentially transform the diagnosis of sexually transmitted infections but their introduction into control programmes can be hampered by health system constraints, and political, cultural, socioeconomic and behavioural factors. We used the introduction of syphilis rapid tests to illustrate the importance of programme science to address the gap between accruing evidence of acceptable test performance and the complexity of programme design, implementation and evaluation of test deployment to address public health needs and improve patient-important outcomes.

Proficiency Testing in Nondestructive Testing (NDT)

International Nuclear Information System (INIS)

Amry Amin Abbas; Suhairy Sani; Mohamad Pauzi Ismail; Abd Nassir Ibrahim

2014-01-01

Department of Standard Malaysia (DSM) launched myPTP programme on 31 December 2013 in accordance to ISO/IC 17043. The standard states the requirements for Proficiency Testing. The provider of these services is called Proficiency Testing Provider (PTP). The role of PTP is to compare the proficiency level between inspection bodies or laboratories. With the assistance of expert panel, the PTP will determine the assigned value as reference to be compared to the values obtained from the inspection bodies or laboratories. Quality wise, this services is important as participation will improve wuality of the inspection quality continuously and increase confidence level of client and improve safety level. Requirement of PT in NDT is mentioned in SC1.5- Specific Criteria for Accreditation of Mechanical Testing and Non-Destructive Testing (NDT) for MS ISO/IEC17025 and MTR2- MIBAS Technical Requirements for Accreditation of NDT. This paper explains and discusses the result of this proficiency test done on a number of NDT companies that participated. (author)

Designing, Modeling, Constructing, and Testing a Flat Panel Speaker and Sound Diffuser for a Simulator

Science.gov (United States)

Dillon, Christina

2013-01-01

The goal of this project was to design, model, build, and test a flat panel speaker and frame for a spherical dome structure being made into a simulator. The simulator will be a test bed for evaluating an immersive environment for human interfaces. This project focused on the loud speakers and a sound diffuser for the dome. The rest of the team worked on an Ambisonics 3D sound system, video projection system, and multi-direction treadmill to create the most realistic scene possible. The main programs utilized in this project, were Pro-E and COMSOL. Pro-E was used for creating detailed figures for the fabrication of a frame that held a flat panel loud speaker. The loud speaker was made from a thin sheet of Plexiglas and 4 acoustic exciters. COMSOL, a multiphysics finite analysis simulator, was used to model and evaluate all stages of the loud speaker, frame, and sound diffuser. Acoustical testing measurements were utilized to create polar plots from the working prototype which were then compared to the COMSOL simulations to select the optimal design for the dome. The final goal of the project was to install the flat panel loud speaker design in addition to a sound diffuser on to the wall of the dome. After running tests in COMSOL on various speaker configurations, including a warped Plexiglas version, the optimal speaker design included a flat piece of Plexiglas with a rounded frame to match the curvature of the dome. Eight of these loud speakers will be mounted into an inch and a half of high performance acoustic insulation, or Thinsulate, that will cover the inside of the dome. The following technical paper discusses these projects and explains the engineering processes used, knowledge gained, and the projected future goals of this project

Analysis and Tests of Reinforced Carbon-Epoxy/Foam-Core Sandwich Panels with Cutouts

Science.gov (United States)

Baker, Donald J.; Rogers, Charles

1996-01-01

The results of a study of a low-cost structurally efficient minimum-gage shear-panel design that can be used in light helicopters are presented. The shear-panel design is based on an integrally stiffened syntactic-foam stabilized-skin with an all-bias-ply tape construction for stabilized-skin concept with an all-bias-ply tape construction for the skins. This sandwich concept is an economical way to increase the panel bending stiffness weight penalty. The panels considered in the study were designed to be buckling resistant up to 100 lbs/in. of shear load and to have an ultimate strength of 300 lbs/in. The panel concept uses unidirectional carbon-epoxy tape on a syntactic adhesive as a stiffener that is co-cured with the skin and is an effective concept for improving panel buckling strength. The panel concept also uses pultruded carbon-epoxy rods embedded in a syntactic adhesive and over-wrapped with a bias-ply carbon-epoxy tape to form a reinforcing beam which is an effective method for redistributing load around rectangular cutout. The buckling strength of the reinforced panels is 83 to 90 percent of the predicted buckling strength based on a linear buckling analysis. The maximum experimental deflection exceeds the maximum deflection predicted by a nonlinear analysis by approximately one panel thickness. The failure strength of the reinforced panels was two and a half to seven times of the buckling strength. This efficient shear-panel design concept exceeds the required ultimate strength requirement of 300 lbs/in by more than 100 percent.

Sandia National Laboratories cask drop test programme: a demonstration of fracture mechanics principles for the prevention of brittle fracture

International Nuclear Information System (INIS)

McConnell, P.; Sorenson, K.B.

1995-01-01

Sandia National Laboratories recently completed a cask drop test programme. The aims of the programme were (1) to demonstrate the applicability of a fracture mechanics-based methodology for ensuring cask integrity, and (2) to assess the viability of using a ferritic materials for cask containment. The programme consisted of four phases: (i) materials characterisation; (ii) non-destructive examination of the cask; (iii) finite element analyses of the drop events; and (iv) a series of drop tests of a ductile iron cask. The first three phases of the programme provided information for fracture mechanics analyses and predictions for the drop test phase. The drop tests were nominally based upon the IAEA 9 m drop height hypothetical accident scenario although one drop test was from 18 m. All tests were performed in the side drop orientation at a temperature of -29 o C. A circumferential, mid-axis flaw was introduced into the cask body for each drop test. Flaw depth ranged from 19 to 76 mm. Steel saddles were welded to the side wall of the cask to enhance the stresses imposed upon the cask in the region of the introduced flaw. The programme demonstrated the applicability of a fracture mechanics methodology for predicting the conditions under which brittle fracture may occur and thereby the utility of fracture mechanics design for ensuring cask structural integrity by ensuring an appropriate margin of safety. Positive assessments of ductile iron for cask containment and the quality of the casting process for producing ductile iron casks were made. The results of this programme have provided data to support IAEA efforts to develop brittle fracture acceptance criteria for cask containment. (author)

Performance of different mono- and multiplex nucleic acid amplification tests on a multipathogen external quality assessment panel.

Science.gov (United States)

Loens, K; van Loon, A M; Coenjaerts, F; van Aarle, Y; Goossens, H; Wallace, P; Claas, E J C; Ieven, M

2012-03-01

An external quality assessment (EQA) panel consisting of a total of 48 samples in bronchoalveolar lavage (BAL) fluid or transport medium was prepared in collaboration with Quality Control for Molecular Diagnostics (QCMD) (www.qcmd.org). The panel was used to assess the proficiency of the three laboratories that would be responsible for examining the 6,000 samples to be collected in the GRACE Network of Excellence (www.grace-lrti.org). The main objective was to decide on the best-performing testing approach for the detection of influenza viruses A and B, parainfluenza virus types 1 to 3, respiratory syncytial virus (RSV), human metapneumovirus, coronavirus, rhinovirus, adenovirus, Chlamydophila pneumoniae, Mycoplasma pneumoniae, and Legionella pneumophila by nucleic acid amplification techniques (NAATs). Two approaches were chosen: (i) laboratories testing samples using their in-house procedures for extraction and amplification and (ii) laboratories using their in-house amplification procedures on centrally extracted samples. Furthermore, three commercially available multiplex NAAT tests-the ResPlex (Qiagen GmbH, Hilden, Germany), RespiFinder plus (PathoFinder, Maastricht, The Netherlands), and RespiFinder Smart 21 (PathoFinder) tests-were evaluated by examination of the same EQA panel by the manufacturer. No large differences among the 3 laboratories were noticed when the performances of the assays developed in-house in combination with the in-house extraction procedures were compared. Also, the extraction procedure (central versus local) had little effect on performance. However, large differences in amplification efficacy were found between the commercially available tests; acceptable results were obtained by using the PathoFinder assays.

Evaluation of the Radiation Protection Research Programmes (1980-1984 and 1985-1989)

International Nuclear Information System (INIS)

Wambersie, A.; Akehurst, R.L.; Marcus, F.; Proukakis, C.; Rajewsky, M.F.; Sinclair, W.K.

1989-07-01

The commission appointed a panel of six independent experts to evaluate its Radiation Protection Research Programmes (1980-84 and 1985-89). The evaluation was carried out according to the guidelines specified by the Council Resolution on the evaluation of R and D programmes (O.J. C213, 09.08.1983), and further developed by the Commission's Plan of Action on Evaluation (O.J. C2(1), 06.01.1987). The scientific evaluation was carried out separately for each of the six sectors of the programme ant the post-Chernobyl actions. The management and socio-economic evaluation was based on discussions with Commission and national officials, programme contractors and site visits to laboratories in the member states. A questionnaire was used to survey scientists involved in the programme

Qualification test results for DOE solar photovoltaic flat panel procurement - PRDA 38

Science.gov (United States)

Griffith, J. S.

1980-01-01

Twelve types of prototypes modules for the DOE Photovoltaic Flat Panel Procurement (PRDA 38) were subjected to qualification tests at the Jet Propulsion Laboratory according to a new specification. Environmental exposures were carried out separately and included temperature cycling, humidity, wind simulation, and hail. The most serious problems discovered were reduced insulation resistance to ground and ground continuity of the metal frames, electrical degradation, erratic power readings, and delamination. The electrical and physical characteristics of the newly received modules are also given.

Programme for test generation for combinatorial and sequential systems

International Nuclear Information System (INIS)

Tran Huy Hoan

1973-01-01

This research thesis reports the computer-assisted search for tests aimed at failure detection in combinatorial and sequential logic circuits. As he wants to deal with complex circuits with many modules such as those met in large scale integrated circuits (LSI), the author used propagation paths. He reports the development of a method which is valid for combinatorial systems and for several sequential circuits comprising elementary logic modules and JK and RS flip-flops. This method is developed on an IBM 360/91 computer in PL/1 language. The used memory space is limited and adjustable with respect to circuit dimension. Computing time is short when compared to that needed by other programmes. The solution is practical and efficient for failure test and localisation

Panel-Based Clinical Genetic Testing in 85 Children with Inherited Retinal Disease.

Science.gov (United States)

Taylor, Rachel L; Parry, Neil R A; Barton, Stephanie J; Campbell, Christopher; Delaney, Claire M; Ellingford, Jamie M; Hall, Georgina; Hardcastle, Claire; Morarji, Jiten; Nichol, Elisabeth J; Williams, Lindsi C; Douzgou, Sofia; Clayton-Smith, Jill; Ramsden, Simon C; Sharma, Vinod; Biswas, Susmito; Lloyd, I Chris; Ashworth, Jane L; Black, Graeme C; Sergouniotis, Panagiotis I

2017-07-01

To assess the clinical usefulness of genetic testing in a pediatric population with inherited retinal disease (IRD). Single-center retrospective case series. Eighty-five unrelated children with a diagnosis of isolated or syndromic IRD who were referred for clinical genetic testing between January 2014 and July 2016. Participants underwent a detailed ophthalmic examination, accompanied by electrodiagnostic testing (EDT) and dysmorphologic assessment where appropriate. Ocular and extraocular features were recorded using Human Phenotype Ontology terms. Subsequently, multigene panel testing (105 or 177 IRD-associated genes) was performed in an accredited diagnostic laboratory, followed by clinical variant interpretation. Diagnostic yield and clinical usefulness of genetic testing. Overall, 78.8% of patients (n = 67) received a probable molecular diagnosis; 7.5% (n = 5) of these had autosomal dominant disease, 25.4% (n = 17) had X-linked disease, and 67.2% (n = 45) had autosomal recessive disease. In a further 5.9% of patients (n = 5), a single heterozygous ABCA4 variant was identified; all these participants had a spectrum of clinical features consistent with ABCA4 retinopathy. Most participants (84.7%; n = 72) had undergone EDT and 81.9% (n = 59) of these patients received a probable molecular diagnosis. The genes most frequently mutated in the present cohort were CACNA1F and ABCA4, accounting for 14.9% (n = 10) and 11.9% (n = 8) of diagnoses respectively. Notably, in many cases, genetic testing helped to distinguish stationary from progressive IRD subtypes and to establish a precise diagnosis in a timely fashion. Multigene panel testing pointed to a molecular diagnosis in 84.7% of children with IRD. The diagnostic yield in the study population was significantly higher compared with that in previously reported unselected IRD cohorts. Approaches similar to the one described herein are expected to become a standard component of care in pediatric ophthalmology

Radiation protection research and training programme review radiation protection programme 1960-89 synopsis of results 1985-89

International Nuclear Information System (INIS)

1990-01-01

This document aims to trace the evolution of the CEC radiation protection programme over its 30 years of existence. During this time, research carried out in the framework of the Community programme has made major contributions to the scientific understanding of the action of ionizing radiation and the protection of man and his environment. This information was crucial for developing better radiation protection management for existing and new technologies and for providing the scientific basis for the regulatory activities of the Commission. One important feature of the programme was the success of bringing together scientists from different Member States to cooperate in the various fields of radiation protection and to integrate different areas of radiation protection research into a coherent approach. The structures thus developed within the programme have enabled research in radiation protection to be conducted in a cost-effective manner on behalf of the Member States. This document aims also to give a synopsis of the most important results of the 1985-89 radiation protection programme. This period was characterized by two challenges, the integration of two Member States into Community research and the impact of the Chernobyl accident. The programme has, in spite of reduced funding, continued to provide a high degree of expertise for the Community in the context of the needs in radiation protection. This has been explicity acknowledged in the evaluation of the 1980-89 programmes carried out by an independent panel

Prognostic classification of MDS is improved by the inclusion of FISH panel testing with conventional cytogenetics.

Science.gov (United States)

Kokate, Prajakta; Dalvi, Rupa; Koppaka, Neeraja; Mandava, Swarna

2017-10-01

Cytogenetics is a critical independent prognostic factor in myelodysplastic syndromes (MDS). Conventional cytogenetics (CC) and Fluorescence in situ hybridization (FISH) Panel Testing are extensively used for the prognostic stratification of MDS, although the FISH test is not yet a bona fide component of the International Prognostic Scoring System (IPSS). The present study compares the utility of CC and FISH to detect chromosomal anomalies and in prognostic categorization. GTG-Banding and FISH Panel Testing specifically for -5/-5q, -7/-7q, +8 and -20q was performed on whole blood or bone marrow samples from 136 patients with MDS. Chromosomal anomalies were found in 40 cases by CC, including three novel translocations. FISH identified at least one anomaly in 54/136 (39.7%) cases. More than one anomaly was found in 18/54 (33.3%) cases, therefore, overall FISH identified 75 anomalies of which 32 (42.6%) were undetected by CC. FISH provided additional information in cases with CC failure and in cases with a normal karyotype. Further, in ten cases with an abnormal karyotype, FISH could identify additional anomalies, increasing the number of abnormalities per patient. Although CC is the gold standard in the cytogenetic profiling of MDS, FISH has proven to be an asset in identifying additional abnormalities. The number of anomalies per patient can predict the prognosis in MDS and hence, FISH contributed towards prognostic re-categorization. The FISH Panel testing should be used as an adjunct to CC, irrespective of the adequacy of the number of metaphases in CC, as it improves the prognostic classification of MDS. Copyright © 2017 Elsevier Inc. All rights reserved.

Advanced solar panel designs

Science.gov (United States)

Ralph, E. L.; Linder, E.

1995-01-01

This paper describes solar cell panel designs that utilize new hgih efficiency solar cells along with lightweight rigid panel technology. The resulting designs push the W/kg and W/sq m parameters to new high levels. These new designs are well suited to meet the demand for higher performance small satellites. This paper reports on progress made on two SBIR Phase 1 contracts. One panel design involved the use of large area (5.5 cm x 6.5 cm) GaAs/Ge solar cells of 19% efficiency combined with a lightweight rigid graphite fiber epoxy isogrid substrate configuration. A coupon (38 cm x 38 cm) was fabricated and tested which demonstrated an array specific power level of 60 W/kg with a potential of reaching 80 W/kg. The second panel design involved the use of newly developed high efficiency (22%) dual junction GaInP2/GaAs/Ge solar cells combined with an advanced lightweight rigid substrate using aluminum honeycomb core with high strength graphite fiber mesh facesheets. A coupon (38 cm x 38 cm) was fabricated and tested which demonstrated an array specific power of 105 W/kg and 230 W/sq m. This paper will address the construction details of the panels and an a analysis of the component weights. A strawman array design suitable for a typical small-sat mission is described for each of the two panel design technologies being studied. Benefits in respect to weight reduction, area reduction, and system cost reduction are analyzed and compared to conventional arrays.

The effect of oblique angle of sound incidence, realistic edge conditions, curvature and in-plane panel stresses on the noise reduction characteristics of general aviation type panels

Science.gov (United States)

Grosveld, F.; Lameris, J.; Dunn, D.

1979-01-01

Experiments and a theoretical analysis were conducted to predict the noise reduction of inclined and curved panels. These predictions are compared to the experimental results with reasonable agreement between theory and experiment for panels under an oblique angle of sound incidence. Theoretical as well as experimental results indicate a big increase in noise reduction when a flat test panel is curved. Further curving the panel slightly decreases the noise reduction. Riveted flat panels are shown to give a higher noise reduction in the stiffness-controlled frequency region, while bonded panels are superior in this region when the test panel is curved. Experimentally measured noise reduction characteristics of flat aluminum panels with uniaxial in-plane stresses are presented and discussed. These test results indicate an important improvement in the noise reduction of these panels in the frequency range below the fundamental panel/cavity frequency.

Discussion panel: field test design & data analysis

Science.gov (United States)

Daniel M. Schmitt; William E. Waters; B. Leo Cadogan; Gerald S. Walton

1985-01-01

I think it is time to open the panel. On my left respectively are Bill Waters, Professor of Entomology and Forestry, University of California, Berkeley; Gerald S. Walton, Biometrician, Northeastern Forest Experiment Station, Hamden; and Leo Cadogan, Forest Pest Management Institute, Canadian Forestry Service, Sault Ste. Marie, Ontario. My name is Dan Schmitt, Program...

[Test and programme sensitivities of screening for colorectal cancer in Reggio Emilia].

Science.gov (United States)

Campari, Cinzia; Sassatelli, Romano; Paterlini, Luisa; Camellini, Lorenzo; Menozzi, Patrizia; Cattani, Antonella

2011-01-01

to estimate the sensitivity of the immunochemical test for faecal occult blood (FOBT) and the sensitivity of the colorectal tumour screening programme in the province of Reggio Emilia. retrospective cohort study, including a sample of 80,357 people of both genders, aged 50-69, who underwent FOBT, during the first round of the screening programme in the province of Reggio Emilia, from April 2005 to December 2007. incidence of interval cancer. The proportional incidence method was used to estimate the sensitivity of FOBT and of the screening programme. Data were stratified according to gender, age and year of interval. the overall sensitivity of FOBT was 73.2% (95%IC 63.8-80.7). The sensitivity of FOBT was lower in females (70.5% vs 75.1%), higher in the 50-59 age group (78.6% vs 70.2%) and higher in the colon than rectum (75.1% vs 68.9%). The test had a significantly higher sensitivity in the 1st year of interval than in the 2nd (84.4% vs 60.5%; RR=0.39, 95%IC 0.22-0.70), a difference which was confirmed, also when data were stratified according to gender. The overall sensitivity of the programme is 70.9% (95%IC 61.5-78.5). No statistically significant differences were shown, if data were stratified according to gender, age or site. Again the sensitivity in the 1st year was significantly higher than in the 2nd year of interval (83.2% vs 57.0%; RR=0.41, 95%IC 0.24-0.69). Overall our data confirmed the findings of similar Italian studies, despite subgroup analysis showed some differences in sensitivity in our study.

A PANEL COINTEGRATION ANALYSIS: AN APPLICATION TO INTERNATIONAL TOURISM DEMAND OF THAILAND

Directory of Open Access Journals (Sweden)

CHUKIAT CHAIBOONSRI

2010-01-01

Full Text Available This paper sought to find the long-run relationships between international tourist arrivals in Thailand and economic variables such as GDP, transportation cost and exchange rates during period of 1986 to 2007. Also this paper used five standard panel unit root tests such as LLC (2002 panel unit root test, Breitung (2000 panel unit root test, IPS (2003 panel unit root test, Maddala and Wu (1999 and Choi (2001 panel unit root test and Handri (1999 panel unit root test. Moreover, the panel cointegration test based on Pedroni residual cointegration tests, Kao residual cointegration tests and Johansen fisher panel cointegration test were used to test in panel among the variables. The OLS estimator, DOLS estimator and FMOLS estimator were used to find the long-run relationship of the international tourism demand model for Thailand.The long-run results indicated that growth in income (GDP of Thai’s Asia major tourist source markets (Malaysia, Japan, Korea, China, Singapore and Taiwan have a positive impact on international tourists arrival to Thailand. In addition, the transportation cost of these countries has negative impact on the number of international tourist arrivals to Thailand. Finally Thailand’s currency has positive impact on the number of international tourist arrivals to Thailand. Most of findings from this study were consistent with economic theory and the implications of the model can be use for policy making.

Experimental analysis of Kevlar modification for TRUPACT-I puncture panels

International Nuclear Information System (INIS)

Longenbaugh, R.S.; Joseph, B.J.

1987-05-01

The Kevlar Test Services was initiated to determine the maximum failure force and the energy-absorbing capability of puncture panels consisting of 16, 20, and 24 layers of 3000-denier 4 x 4 basket weave Kevlar-29, bonded to a 3.41 mm 304 annealed stainless steel puncture plate. Results of these tests were compared to the TRUPACT-1 Unit-0 drop test results to determine if the existing puncture panel configuration of TRUPACT-1 could be reduced. The data indicate for 24 layers of Kevlar, the panels failed at loads greater than those recorded in the TRUPACT-1, Unit 0 tests. Energy absorbed by the 24-layer Kevlar panels was 53% greater than that measured in the TRUPACT-1, Unit 0 test. Thermal performance of 20-layer Kevlar panels was measured in a conservative test environment and exceeded the design specifications

Design and commission of an experimental test rig to apply a full-scale pressure load on composite sandwich panels representative of an aircraft secondary structure

International Nuclear Information System (INIS)

Crump, D A; Dulieu-Barton, J M; Savage, J

2010-01-01

This paper describes the design of a test rig, which is used to apply a representative pressure load to a full-scale composite sandwich secondary aircraft structure. A generic panel was designed with features to represent those in the composite sandwich secondary aircraft structure. To provide full-field strain data from the panels, the test rig was designed for use with optical measurement techniques such as thermoelastic stress analysis (TSA) and digital image correlation (DIC). TSA requires a cyclic load to be applied to a structure for the measurement of the strain state; therefore, the test rig has been designed to be mounted on a standard servo-hydraulic test machine. As both TSA and DIC require an uninterrupted view of the surface of the test panel, an important consideration in the design is facilitating the optical access for the two techniques. To aid the test rig design a finite element (FE) model was produced. The model provides information on the deflections that must be accommodated by the test rig, and ensures that the stress and strain levels developed in the panel when loaded in the test rig would be sufficient for measurement using TSA and DIC. Finally, initial tests using the test rig have shown it to be capable of achieving the required pressure and maintaining a cyclic load. It was also demonstrated that both TSA and DIC data can be collected from the panels under load, which are used to validate the stress and deflection derived from the FE model

Programmable pulse generator

International Nuclear Information System (INIS)

Xue Zhihua; Lou Binqiao; Duan Xiaohui

2002-01-01

The author introduces the design of programmable pulse generator that is based on a micro-controller and controlled by RS232 interface of personal computer. The whole system has good stability. The pulse generator can produce TTL pulse and analog pulse. The pulse frequency can be selected by EPLD. The voltage amplitude and pulse width of analog pulse can be adjusted by analog switches and digitally-controlled potentiometers. The software development tools of computer is National Instruments LabView5.1. The front panel of this virtual instrumentation is intuitive and easy-to-use. Parameters can be selected and changed conveniently by knob and slide

Determining Damping Trends from a Range of Cable Harness Assemblies on a Launch Vehicle Panel from Test Measurements

Science.gov (United States)

Smith, Andrew; Davis, R. Ben; LaVerde, Bruce; Jones, Douglas

2012-01-01

The team of authors at Marshall Space Flight Center (MSFC) has been investigating estimating techniques for the vibration response of launch vehicle panels excited by acoustics and/or aero-fluctuating pressures. Validation of the approaches used to estimate these environments based on ground tests of flight like hardware is of major importance to new vehicle programs. The team at MSFC has recently expanded upon the first series of ground test cases completed in December 2010. The follow on tests recently completed are intended to illustrate differences in damping that might be expected when cable harnesses are added to the configurations under test. This validation study examines the effect on vibroacoustic response resulting from the installation of cable bundles on a curved orthogrid panel. Of interest is the level of damping provided by the installation of the cable bundles and whether this damping could be potentially leveraged in launch vehicle design. The results of this test are compared with baseline acoustic response tests without cables. Damping estimates from the measured response data are made using a new software tool that employs a finite element model (FEM) of the panel in conjunction with advanced optimization techniques. This paper will report on the \\damping trend differences. observed from response measurements for several different configurations of cable harnesses. The data should assist vibroacoustics engineers to make more informed damping assumptions when calculating vibration response estimates when using model based analysis approach. Achieving conservative estimates that have more flight like accuracy is desired. The paper may also assist analysts in determining how ground test data may relate to expected flight response levels. Empirical response estimates may also need to be adjusted if the measured response used as an input to the study came from a test article without flight like cable harnesses.

A Comparative Study of the Analysis, Numerical Modelling and Experimental Test on a Sandwich Panel with Plane and Profiled Facings

Directory of Open Access Journals (Sweden)

Raluca Hohan

2010-01-01

Full Text Available Sandwich panels are remarkable products because they can be as strong as a solid material but with less weight. The analysis that is required to predict the stresses and deflections in panels with flat or lightly profiled facings is that of conventional beam theory but with the addition of shear deformation. Knowing that the profiled sheets bring an increase of the flexural stiffness, formulas showing the calculus of a panel with flat and profiled facings are established. A comparison between the results of a mathematical calculus, an experimental test and a numerical modelling is provided.

Fabrication of metallic honeycomb panels for reusable TPS - structures

International Nuclear Information System (INIS)

Tabernig, B.; Thierfelder, W.; Alber, H.; Sudmeijer, K.

2001-01-01

The manufacturing technology with specific regard to high temperature brazing was developed to fabricate a honeycomb panel consisting of a thin-sectioned PM 2000 core material sandwiched on both sides with PM 1000 face sheets. For brazing the PM 1000 / PM 2000 panel the braze alloy PdNi was selected due to the best oxidation behavior while good mechanical properties and wetting behavior compared with other tested filler alloys. To examine the concept of a hybrid PM 1000/2000 panel as a stiffened skin panel a number of engineering test samples of sub-scale and two full-size panels were fabricated at Plansee AG and supplied to Fokker Space for testing under representative in-service conditions. Engineering tests showed that the test samples were rather insensitive to temperature gradients even at temperature differences between the face sheets of 550 o C. The engineering test samples exhibited no plastic deformation after testing at different heating rates ranging from 5 to 40 o C/s and at temperature profiles representative for two flights. The requirement for the designed application regarding impact properties at low as well as high speed were met. Impact at low speed with an energy of 8 J did not cause any cracks. Hail tests where ice bullets were fired with speeds to 208 m/s at different angles from 25 o to 90 o C against the test piece showed no damage at 25 o and caused slight indentation at 45 o and cracks at 90 o , which demonstrated a good performance for the fly through a hail cloud without any problems. In tests to determine the response of a full-size panel to a number of simulated thermo-mechanical flight load cycles the panel passed 50 cycles successfully without damage. (author)

Autoimmune liver disease panel

Science.gov (United States)

Liver disease test panel - autoimmune ... Autoimmune disorders are a possible cause of liver disease. The most common of these diseases are autoimmune hepatitis and primary biliary cholangitis (formerly called primary biliary cirrhosis). This group of tests ...

Testing for Marshall-Lerner hypothesis: A panel approach

Science.gov (United States)

Azizan, Nur Najwa; Sek, Siok Kun

2014-12-01

The relationship between real exchange rate and trade balances are documented in many theories. One of the theories is the so-called Marshall-Lerner condition. In this study, we seek to test for the validity of Marshall-Lerner hypothesis, i.e. to reveal if the depreciation of real exchange rate leads to the improvement in trade balances. We focus our study in ASEAN-5 countries and their main trade partners of U.S., Japan and China. The dynamic panel data of pooled mean group (PMG) approach is used to detect the Marshall-Lerner hypothesis among ASEAN-5, between ASEAN-5 and U.S., between ASEAN-5 and Japan and between ASEAN-5 and China respectively. The estimation is based on the autoregressive Distributed Lag or ARDL model for the period of 1970-2012. The paper concludes that Marshal Lerner theory does not hold in bilateral trades in four groups of countries. The trade balances of ASEAN5 are mainly determined by the domestic income level and foreign production cost.

The Belgian nuclear higher education network: the evolution of an academic programme in nuclear engineering

International Nuclear Information System (INIS)

Berkvens, T.; Coeck, M.

2014-01-01

The master-after-master in nuclear engineering provided by the Belgian Nuclear higher Education Network (BNEN) is a one-year, 60 ECTS programme which combines the expertise of six Belgian universities and SCK.CEN, the Belgian Nuclear Research Centre, which participates through its Academy for Nuclear Science and Technology. It was created in close collaboration with representatives of academia, research centres, industry and other nuclear stakeholders. The BNEN consortium Due to its modular programme, BNEN is accessible for both full-time students (mainly young engineering graduates) as well as young professionals already employed in the nuclear industry. The programme is offered in English to facilitate the participation of international students. One of the important aspects of the BNEN programme is the fact that exercises and hands-on sessions in the specialised laboratories of SCK.CEN complement the theoretical classes to bring the students into contact with all facets of nuclear energy. Several of SCK.CEN's researchers provide valuable contributions to the programme through seminars and practical exercises. From their daily practices and responsibilities they give an expert view on the subjects that are being taught. In 2012, in the framework of an official accreditation process all aspects of the BNEN programme were audited by an international visitation panel. The most important outcome of this process is the current reform of the academic programme, which will be implemented in the academic year 2014-2015, taking into account the recommendations by the visitation panel. In this paper, the history of the BNEN programme will be discussed, the new BNEN programme will be presented as well as the process that has led to its implementation. (authors)

Impact on colorectal cancer mortality of screening programmes based on the faecal immunochemical test.

Science.gov (United States)

Zorzi, Manuel; Fedeli, Ugo; Schievano, Elena; Bovo, Emanuela; Guzzinati, Stefano; Baracco, Susanna; Fedato, Chiara; Saugo, Mario; Dei Tos, Angelo Paolo

2015-05-01

Colorectal cancer (CRC) screening programmes based on the guaiac faecal occult blood test (gFOBT) reduce CRC-specific mortality. Several studies have shown higher sensitivity with the faecal immunochemical test (FIT) compared with gFOBT. We carried out an ecological study to evaluate the impact of FIT-based screening programmes on CRC mortality. In the Veneto Region (Italy), biennial FIT-based screening programmes that invited 50-69-year-old residents were introduced in different areas between 2002 and 2009. We compared CRC mortality rates from 1995 to 2011 between the areas where screening started in 2002-2004 (early screening areas (ESA)) and areas that introduced the screening in 2008-2009 (late screening areas (LSA)) using Poisson regression models. We also compared available data on CRC incidence rates (1995-2007) and surgical resection rates (2001-2012). Before the introduction of screening, CRC mortality and incidence rates in the two areas were similar. Compared with 1995-2000, 2006-2011 mortality rates were 22% lower in the ESA than in the LSA (rate ratio (RR)=0.78; 95% CI 0.68 to 0.89). The reduction was larger in women (RR=0.64; CI 0.51 to 0.80) than in men (RR=0.87; CI 0.73 to 1.04). In the ESA, incidence and surgery rates peaked during the introduction of the screening programme and then returned to the baseline (2006-2007 incidence) or dropped below initial values (surgery after 2007). FIT-based screening programmes were associated with a significant reduction in CRC mortality. This effect took place much earlier than reported by gFOBT-based trials and observational studies. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

Seismic Evaluation of Structural Insulated Panels in Comparison with Wood-Frame Panels

Directory of Open Access Journals (Sweden)

Stefanie Terentiuk

2014-07-01

Full Text Available Structural Insulated Panel (SIP wall systems have been used in residential and light commercial buildings for the past sixty years. Lack of sufficient published research on racking load performance and limited understanding of the influence of fastener types on seismic response has been a deterrent in widespread use of the wall system in seismically active areas. This paper presents the results of a study involving a total of twenty one 2.4 m × 2.4 m shear walls tested under monotonic and cyclic loading. Four different 114 mm thick SIP panel configurations and one traditional wood frame wall were tested under monotonic loading according to ASTM E 564-06; and thirteen 114 mm thick SIP panels and three wood frame walls were tested under the CUREE loading protocol according to ASTM E 2126-11. Parameters such as fastener type; spline design; hold-down anchor location; and sheathing bearing were adjusted throughout the testing in order to determine their effects on the SIP’s performance. Performance parameters such as peak load and displacement; energy dissipation; allowable drift load capacity and seismic compatibility were determined for all of the specimens. Such parameters were then used to demonstrate the SIP walls’ compatibility with the wood frame walls and to determine the efficiency of the different SIP wall configuration and spline systems employed.

Modal Analysis of MARS Solar Panel and Planar Vibrations

Science.gov (United States)

Simonyan, Andranik; Williams, R. Brett

2007-01-01

This slide presentation reviews the modal analysis of MARS solar panels and the planar vibrations. Included are views of the solar panels mock-up assembly, a view of the test seup,a view of the plot from the test, with the raw numbers of the frequencies in Hz values with the mode number, the spatial acceleration plots of Center sub panel at resonant frequencies, predictions from the Finite element models, an explanation of the two test that were done on the plate and the results from both tests,

PV panel model based on datasheet values

DEFF Research Database (Denmark)

Sera, Dezso; Teodorescu, Remus; Rodriguez, Pedro

2007-01-01

This work presents the construction of a model for a PV panel using the single-diode five-parameters model, based exclusively on data-sheet parameters. The model takes into account the series and parallel (shunt) resistance of the panel. The equivalent circuit and the basic equations of the PV cell....... Based on these equations, a PV panel model, which is able to predict the panel behavior in different temperature and irradiance conditions, is built and tested....

Advantages and pitfalls of an extended gene panel for investigating complex neurometabolic phenotypes.

Science.gov (United States)

Reid, Emma S; Papandreou, Apostolos; Drury, Suzanne; Boustred, Christopher; Yue, Wyatt W; Wedatilake, Yehani; Beesley, Clare; Jacques, Thomas S; Anderson, Glenn; Abulhoul, Lara; Broomfield, Alex; Cleary, Maureen; Grunewald, Stephanie; Varadkar, Sophia M; Lench, Nick; Rahman, Shamima; Gissen, Paul; Clayton, Peter T; Mills, Philippa B

2016-11-01

Neurometabolic disorders are markedly heterogeneous, both clinically and genetically, and are characterized by variable neurological dysfunction accompanied by suggestive neuroimaging or biochemical abnormalities. Despite early specialist input, delays in diagnosis and appropriate treatment initiation are common. Next-generation sequencing approaches still have limitations but are already enabling earlier and more efficient diagnoses in these patients. We designed a gene panel targeting 614 genes causing inborn errors of metabolism and tested its diagnostic efficacy in a paediatric cohort of 30 undiagnosed patients presenting with variable neurometabolic phenotypes. Genetic defects that could, at least partially, explain observed phenotypes were identified in 53% of cases. Where biochemical abnormalities pointing towards a particular gene defect were present, our panel identified diagnoses in 89% of patients. Phenotypes attributable to defects in more than one gene were seen in 13% of cases. The ability of in silico tools, including structure-guided prediction programmes to characterize novel missense variants were also interrogated. Our study expands the genetic, clinical and biochemical phenotypes of well-characterized (POMGNT1, TPP1) and recently identified disorders (PGAP2, ACSF3, SERAC1, AFG3L2, DPYS). Overall, our panel was accurate and efficient, demonstrating good potential for applying similar approaches to clinically and biochemically diverse neurometabolic disease cohorts. © The Author (2016). Published by Oxford University Press on behalf of the Guarantors of Brain.

Experimental Test for Benchmark 1--Deck Lid Inner Panel

International Nuclear Information System (INIS)

Xu Siguang; Lanker, Terry; Zhang, Jimmy; Wang Chuantao

2005-01-01

The Benchmark 1 deck lid inner is designed for both aluminum and steel based on a General Motor Corporation's current vehicle product. The die is constructed with a soft tool material. The die successfully produced aluminum and steel panels without splits and wrinkles. Detailed surface strains and thickness measurement were made at selected sections to include a wide range of deformation patterns from uniaxial tension mode to bi-axial tension mode. The springback measurements were done by using CMM machine along the part's hem edge which is critical to correct dimensional accuracy. It is expected that the data obtained will provide a useful source for forming and springback study on future automotive panels

Purchasing Power Parity in Transition Countries: Panel Stationary Test with Smooth and Sharp Breaks

Directory of Open Access Journals (Sweden)

Mohsen Bahmani-Oskooee

2015-05-01

Full Text Available This study examines whether the long-run purchasing power parity (PPP holds in transition economies (Bulgaria, the Czech Republic, Hungary, Latvia, Lithuania, Poland, Romania and Russia using monthly data over the 1995–2011 period. We apply a recently introduced panel stationary test, which accounts for sharp breaks and smooth shifts. The results indicate that the PPP holds only in two countries (i.e., Lithuania and Poland.

Efficiency of solar radiation conversion in photovoltaic panels

Directory of Open Access Journals (Sweden)

Kurpaska Sławomir

2018-01-01

Full Text Available This paper included analysis the conversion efficiency in photovoltaic panels. The tests were done between February and June at a test stand equipped with three commonly used types of photovoltaic panels: poly- and monocrystalline silicon and with semi-conductive layer made of copper (Cu, indium (In, gallium (Ga and selenium (Se (CIGS. Five days of each month were selected for a detailed analysis. They were close to the so-called recommended day for calculations in solar power engineering. Efficiency, calculated as the yield of electrical energy in relation to solar radiation energy reaching the panels was made conditional upon solar radiation intensity and ambient temperature. It was found that as solar radiation intensity and ambient temperature increase, the efficiency of solar radiation conversion into electricity is reduced. Correlation dependence was determined for the test data obtained, describing temperature change of panels depending on climatic conditions. It was found that as panel temperature increases, the conversion efficiency is reduced. Within the tested scope of experiment conditions, the efficiency was reduced in the range between 20.1 and 22.8%. The authors also determined the average efficiency values in individual test months together with average ambient conditions of the environment where the process of solar radiation conversion took place.

Results of molten salt panel and component experiments for solar central receivers: Cold fill, freeze/thaw, thermal cycling and shock, and instrumentation tests

Energy Technology Data Exchange (ETDEWEB)

Pacheco, J.E.; Ralph, M.E.; Chavez, J.M.; Dunkin, S.R.; Rush, E.E.; Ghanbari, C.M.; Matthews, M.W.

1995-01-01

Experiments have been conducted with a molten salt loop at Sandia National Laboratories in Albuquerque, NM to resolve issues associated with the operation of the 10MW{sub e} Solar Two Central Receiver Power Plant located near Barstow, CA. The salt loop contained two receiver panels, components such as flanges and a check valve, vortex shedding and ultrasonic flow meters, and an impedance pressure transducer. Tests were conducted on procedures for filling and thawing a panel, and assessing components and instrumentation in a molten salt environment. Four categories of experiments were conducted: (1) cold filling procedures, (2) freeze/thaw procedures, (3) component tests, and (4) instrumentation tests. Cold-panel and -piping fill experiments are described, in which the panels and piping were preheated to temperatures below the salt freezing point prior to initiating flow, to determine the feasibility of cold filling the receiver and piping. The transient thermal response was measured, and heat transfer coefficients and transient stresses were calculated from the data. Freeze/thaw experiments were conducted with the panels, in which the salt was intentionally allowed to freeze in the receiver tubes, then thawed with heliostat beams. Slow thermal cycling tests were conducted to measure both how well various designs of flanges (e.g., tapered flanges or clamp type flanges) hold a seal under thermal conditions typical of nightly shut down, and the practicality of using these flanges on high maintenance components. In addition, the flanges were thermally shocked to simulate cold starting the system. Instrumentation such as vortex shedding and ultrasonic flow meters were tested alongside each other, and compared with flow measurements from calibration tanks in the flow loop.

The Phebus fission products in pile test programme

International Nuclear Information System (INIS)

Bussac, J.; Holtbecker, H.

1988-01-01

The need for quantifying the radioactive materials escaping from an LWR Nuclear Power Plant following a melt-down accident has arisen relatively late in the nuclear reactor technology development process. The TMI-2 accident in 1979 and the Chernobyl accident in 1986 have confirmed the importance of a good knowledge of phenomena which take place in a plant undergoing extreme accident conditions. After an extensive resarch effort which has involved the major nuclear countries for several years, we are now at the stage where a selective and converging attitude should be taken towards the wide range of problems underlying severe accidents. Selective, because we must understand what is important and what could be neglected. Converging, because we must arrive at a consensus at international level on the methods to treat these problems and a common understanding of the main scientific phenomena and the models to correctly represent them. After a large amount of separate effects tests and semi-integral in-pile and out-of-pile experiments, the Phebus FP project is being started as an experimental effort to quantify the relative importance of complicated processes and to give an insight into the interconnection of various mechanisms. The overall objective of this programme is to provide a qualified data base of integral in-pile experiments to validate codes dealing with FP transport in reactor core, primary cooling system and containment. This paper describes mainly the motivations and objectives of the Phebus PF programme

Manufacture of New Set of Calorimeter Panels for the Neutral Beam Injection of ASDEX Upgrade

International Nuclear Information System (INIS)

Huber, T.; Zabernig, A.; Riedel, R.; Schedler, B.; Froeschle, M.; Heinemann, B.; Entcheva, A.; Weigert, J.

2006-01-01

The Neutral Injection of ASDEX-Upgrade employs calorimeter panels to measure the power of the neutral beam. These components are designed to safely absorb specific heat flux loads as high as 25 MW/m 2 over a period of 10 s. The currently used calorimeter panels have reached after ten years the end of their service life time and have to be replaced. The components consist of the CuCrZr which is a precipitation hardened alloy. The selection of the manufacturing process therefore determines the final thermal and mechanical properties of the alloy. In the past these components were manufactured by a two step brazing process, at about 830 o C and 730 o C, respectively. This led to an overaging of the material resulting in low mechanical properties. As predicted by finite element calculations the cyclic heat flux load leads to ratcheting at the heated surface finally limiting the life time of the components. In order to increase the service life time of the component it has therefore been decided to employ electron beam welding as the only joining technique to realise the required joints of the components. To fully characterise this manufacturing route a qualification programme has been performed, which ended in the manufacture of prototypes. These have been tested in ASEDEX Upgrade in comparison to brazed components. After successful qualification of design and processes the manufacture and testing of 100 calorimeter panels has been launched and completed recently. The used design, the results of the qualification tests, the manufacturing sequence and the applied non-destructive methods will be described in the paper. (author)

The Impact of MBA Programme Attributes on Post-MBA Salaries

Science.gov (United States)

Elliott, Caroline; Soo, Kwok Tong

2016-01-01

This paper explores the impact of various Master of Business Administration (MBA) programme attributes on the average post-MBA salary of graduates, contributing to the literature on the returns to an MBA degree, which to date has instead focused predominantly on the impact of individual student traits. The analysis uses a new panel dataset,…

Evaluation of a Serum Lung Cancer Biomarker Panel.

Science.gov (United States)

Mazzone, Peter J; Wang, Xiao-Feng; Han, Xiaozhen; Choi, Humberto; Seeley, Meredith; Scherer, Richard; Doseeva, Victoria

2018-01-01

A panel of 3 serum proteins and 1 autoantibody has been developed to assist with the detection of lung cancer. We aimed to validate the accuracy of the biomarker panel in an independent test set and explore the impact of adding a fourth serum protein to the panel, as well as the impact of combining molecular and clinical variables. The training set of serum samples was purchased from commercially available biorepositories. The testing set was from a biorepository at the Cleveland Clinic. All lung cancer and control subjects were >50 years old and had smoked a minimum of 20 pack-years. A panel of biomarkers including CEA (carcinoembryonic antigen), CYFRA21-1 (cytokeratin-19 fragment 21-1), CA125 (carbohydrate antigen 125), HGF (hepatocyte growth factor), and NY-ESO-1 (New York esophageal cancer-1 antibody) was measured using immunoassay techniques. The multiple of the median method, multivariate logistic regression, and random forest modeling was used to analyze the results. The training set consisted of 604 patient samples (268 with lung cancer and 336 controls) and the testing set of 400 patient samples (155 with lung cancer and 245 controls). With a threshold established from the training set, the sensitivity and specificity of both the 4- and 5-biomarker panels on the testing set was 49% and 96%, respectively. Models built on the testing set using only clinical variables had an area under the receiver operating characteristic curve of 0.68, using the biomarker panel 0.81 and by combining clinical and biomarker variables 0.86. This study validates the accuracy of a panel of proteins and an autoantibody in a population relevant to lung cancer detection and suggests a benefit to combining clinical features with the biomarker results.

Plant nutrient supply and movement. Report of a panel

Energy Technology Data Exchange (ETDEWEB)

NONE

1965-11-01

Despite the emphasis given by the Agency to the more practical field experimentation in agriculture like soil fertility and fertilizer utilization, it is obvious that any long-term programme of soil fertility research must also take into account the fundamentals of plant nutrient supply and movement. Thus a large gap exists between the present methods used for predicting the response of a crop to fertilizer on any given soil and fundamental knowledge in soil physics, chemistry and biology. Only when precise determinations can be made of the quantity of ions in the soil solution, the adsorption complex, and the rate at which the exchange processes occur, will it be possible to develop a scientific basis for the evaluation of the nutrient status of soils and to make efficient fertilizer recommendations. Study of these processes, and others, such as ion movement as affected by water flow and diffusion phenomena, have been carried out on a very limited scale by individual scientists in widely separated institutes. Comparative lack of progress in this field is, at least in part, due to the absence of co-ordinated planning and exchange of information among scientists working on these problems, and it is for this reason that this meeting has been organized by the Agency. From the research point of view a co-ordinated research contract programme on plant nutrient supply and movement has already been initiated and at present there are six contractors. An essential feature of the programme is co-ordination, and this Panel partly represents the second planning meeting of these contractors. The discussions will, however, have wider scope, as other acknowledged specialists in the subject are participating in this Panel.

Programmable cellular arrays. Faults testing and correcting in cellular arrays

International Nuclear Information System (INIS)

Cercel, L.

1978-03-01

A review of some recent researches about programmable cellular arrays in computing and digital processing of information systems is presented, and includes both combinational and sequential arrays, with full arbitrary behaviour, or which can realize better implementations of specialized blocks as: arithmetic units, counters, comparators, control systems, memory blocks, etc. Also, the paper presents applications of cellular arrays in microprogramming, in implementing of a specialized computer for matrix operations, in modeling of universal computing systems. The last section deals with problems of fault testing and correcting in cellular arrays. (author)

Preparation and application of tea to a tritium performance testing programme

International Nuclear Information System (INIS)

Daka, J. N.; Moodie, G.; Dinardo, A.; Kramer, G. H.

2012-01-01

A simple, but novel technique, for adjusting steeps of black tea to produce fluids, which are visually and spectroscopically similar to urine, has been developed at the National Calibration Reference Centre for Bioassay and In Vivo Monitoring in Canada. The method uses scans of absorbance versus wavelength, in the UV-VIS range (200-800 nm) to select diluted tea steeps that simulate urine. Tea solutions (1 and 10 %) were spiked with tritium and distributed to laboratories for performance testing (PT). The PT exercise was done as in a regular bioassay programme. The results showed that all samples satisfied the pass/fail conditions of the S-106 standard of the Canadian Nuclear Safety Commission, suggesting that adjusted tea successfully simulated urine for the tritium PT programmes. Also, since unlike urine whose use may increase the probability of contaminating and transmitting diseases (e.g. hepatitis C), tea is a safer alternative. When needed, it can readily be prepared for the laboratories. (authors)

Reel Efektif Döviz Kurunun Durağanlığının Yapısal Kırılmalı Panel Birim Kök Testleri Kullanılarak Sınanması = Analyzing the Stationarity of Reel Effective Exchange Rates Using Panel Unit Root Tests with Structural Breaks

Directory of Open Access Journals (Sweden)

Ferda YERDELEN TATOĞLU

2009-06-01

Full Text Available In the last years, many studies have analyzed the stationarity of reel exchange rates which gives important knowledge about economic stability of countries. The panel unit root tests which include both pooled and individual unit root tests are used frequently to analyze the stationarity of real exchange rates. Generally, structural breaks issue have taken place in macroeconomic time series for some years. If unit root tests are used without taking account these structural breaks, stationarity hypothesis can be rejected mistakenly. In this study, panel unit root tests with and without structural breaks were used to analyze the validity of Purchasing Power Parity hypothesis in 25 OECD countries. According to the results, while in panel unit root tests with no break, PPP theory is valid for only 10 countries; it is valid for all countries in panel unit root tests with structural breaks.

Testing the Grossman model of medical spending determinants with macroeconomic panel data.

Science.gov (United States)

Hartwig, Jochen; Sturm, Jan-Egbert

2018-02-16

Michael Grossman's human capital model of the demand for health has been argued to be one of the major achievements in theoretical health economics. Attempts to test this model empirically have been sparse, however, and with mixed results. These attempts so far relied on using-mostly cross-sectional-micro data from household surveys. For the first time in the literature, we bring in macroeconomic panel data for 29 OECD countries over the period 1970-2010 to test the model. To check the robustness of the results for the determinants of medical spending identified by the model, we include additional covariates in an extreme bounds analysis (EBA) framework. The preferred model specifications (including the robust covariates) do not lend much empirical support to the Grossman model. This is in line with the mixed results of earlier studies.

Concrete Flow in Diaphragm Wall Panels : A Full-Scale In-Situ Test

NARCIS (Netherlands)

Van Dalen, J.H.; Bosch, J.W.; Broere, W.

2015-01-01

Flow processes, taking place during the concreting of diaphragm wall panels (D-wall panels), are of great importance for the quality of the wall. During this phase, the bentonite, present in the excavated trench, should be completely replaced by concrete in a controlled way. In literature several

Compensation for the victims of the Marshall Islands nuclear testing programme: the Marshall Islands Nuclear Claims Tribunal

International Nuclear Information System (INIS)

Briscoe, W.

1992-01-01

The Marshall Islands Nuclear Claims Tribunal was established in 1988 pursuant to legislation enacted by the Republic of the Marshall Islands as part of its obligations under the Compact of Free Association between it and the United States (ratified 1986) and an associated Compact implementation agreement. The Tribunal is generally considered to be the last hope for compensation for a large number of Marshallese who claim to have suffered injury or damage as a result of the United States Nuclear Testing Programme in the Marshall Islands, 1946 - 1958. Under the Compact, the United States admitted liability for injuries and damages suffered by Marshallese as a result of the Testing Programme and made provision for the payment of compensation. In return, the Republic agreed to espouse, on behalf of it and its citizens, all current and future claims for compensation against the United States. The Tribunal has been given a most challenging and unique assignment: - to identify and compensate the victims of the Testing Programme, with a potentially limited sum of money, an indefinite number of victims, and with cultural, environmental and political circumstances which are not altogether conducive to Western concepts associated with compensating people for damages and personal injuries suffered as a result of a wrongful act. The paper will describe the Tribunal's role in compensating the victims of the Testing Programme. It will highlight a number of legal, social and cultural difficulties in establishing and operating a scheme to compensate people for damages and injuries suffered or commenced up to forty years previously. (author)

Nuclear energy consumption, oil consumption and economic growth in G-6 countries: Bootstrap panel causality test

International Nuclear Information System (INIS)

Chu, Hsiao-Ping; Chang Tsangyao

2012-01-01

This study applies bootstrap panel Granger causality to test whether energy consumption promotes economic growth using data from G-6 countries over the period of 1971–2010. Both nuclear and oil consumption data are used in this study. Regarding the nuclear consumption-economic growth nexus, nuclear consumption causes economic growth in Japan, the UK, and the US; economic growth causes nuclear consumption in the US; nuclear consumption and economic growth show no causal relation in Canada, France and Germany. Regarding oil consumption-economic growth nexus, we find that there is one-way causality from economic growth to oil consumption only in the US, and that oil consumption does not Granger cause economic growth in G-6 countries except Germany and Japan. Our results have important policy implications for the G-6 countries within the context of economic development. - Highlights: ► Bootstrap panel Granger causality test whether energy consumption promotes economic growth. ► Data from G-6 countries for both nuclear and oil consumption data are used. ► Results have important policy implications within the context of economic development.

Panel Data Evidence on the Demand for Money

OpenAIRE

Serletis, Apostolos; Vaccaro, Jason

2006-01-01

This paper examines the demand for money using panel data for 48 countries over the 1980-95 time period. In our examination of the conventional money demand function, we begin by empirically exploiting traditional panel methodology and fi nd support for heterogeneity among the countries. However, specifi cation and diagnostic tests also indicate serial correlation in all of the estimated models. Recent state-of-the art advances in panel unit root and panel cointegration methodology allow us t...

Test and Analysis Correlation of Form Impact onto Space Shuttle Wing Leading Edge RCC Panel 8

Science.gov (United States)

Fasanella, Edwin L.; Lyle, Karen H.; Gabrys, Jonathan; Melis, Matthew; Carney, Kelly

2004-01-01

Soon after the Columbia Accident Investigation Board (CAIB) began their study of the space shuttle Columbia accident, "physics-based" analyses using LS-DYNA were applied to characterize the expected damage to the Reinforced Carbon-Carbon (RCC) leading edge from high-speed foam impacts. Forensic evidence quickly led CAIB investigators to concentrate on the left wing leading edge RCC panels. This paper will concentrate on the test of the left-wing RCC panel 8 conducted at Southwest Research Institute (SwRI) and the correlation with an LS-DYNA analysis. The successful correlation of the LS-DYNA model has resulted in the use of LS-DYNA as a predictive tool for characterizing the threshold of damage for impacts of various debris such as foam, ice, and ablators onto the RCC leading edge for shuttle return-to-flight.

Financial Development and Output Growth: A Panel Study for Asian Countries

Directory of Open Access Journals (Sweden)

Sangjoon Jun

2012-03-01

Full Text Available This paper investigates the relationship between financial markets and output growth for a panel of 27 Asian countries over 1960-2009. It utilizes the recently-developed panel cointegration techniques to test and estimate the long-run equilibrium relationship between real GDP and financial development proxies. Real GDP and financial development variables are found to have unit roots and to be cointegrated, based on various panel unit root tests and panel cointegration tests. We find that there is a statistically significant positive bi-directional cointegrating relationship between financial development and output growth by three distinct methods of panel cointegration estimation. Empirical findings suggest that financial market development promotes output growth and in turn output growth stimulates further financial development.

Performance of patch repaired composite panels under fatigue loads

International Nuclear Information System (INIS)

Darwish, Feras H.; Hamoush, S.; Shivakumar, K.

2006-01-01

This paper evaluates the performance of bonded patch-scarf repairs of full scale laminated composite panels under cyclic load conditions. Nondestructive testing to characterize the quality of repairs and destructive testing to evaluate the performance of repaired panels were used in this study. Carbon/Epoxy prepreg material used was used to lay up six-ply (12 in. x 27 in. /305x686mm) (-60/60/0) s quasi-isotropic laminates. 7-ply scarf repair with a gradient of 0.5 inch (12.7mm) per layer was used to perform the repair of a damaged zone. The patch consisted of 7.5 inches (190mm) diameter adhesive film, 1 inch (25.4mm) diameter filler ply at 90fiber orientation, and six plies (2-7 inches (51-178mm) diameter) to match the lay-up of the parent material. The study was extended to include defective repairs. The defect was engineered by inserting a 1 inch (25.4 mm) circular Teflon flaw between the fifth and sixth layers of the patch. A total of 28 panels were prepared and divided into five categories: (1) three pristine panels (undamaged parental materials); (2) three damaged panels (1-inch-centered-hole); (3) two repaired panels with wrong fiber orientation; (4) nine good repaired panels, and (5) eleven defective repair panels (1 inch flaw). A nondestructive evaluation to check the conditions of the repairs was performed on most of the tested panels that include the pulse-echo C-scan and pseudo through transmission air coupled and water coupled C-scan. Based on the results of the experimental evaluation of this study, good repair restored 95% of the tensile strength while defective repair restored 90% of the tensile strength of the pristine panels. Under fatigue loading, panels repaired with a 1 inch delamination flaw within the patch layers showed a major reduction in fatigue life compared to the good repair panels under similar loading conditions. (author)

IOC-WMO Intergovernmental WOCE panel. First session

International Nuclear Information System (INIS)

1990-10-01

Ocean currents are an important mechanism by which the present-day climate system moves heat and salt from one latitude band to another. Meteorologists have long been able to quantify the large scale atmospheric circulation by mapping surface pressure. It is only in the coming decade that advances in satellite altimetry, deep floats and surface drifters will permit the design of programmes to determine the ocean circulation in a global and a quantitative sense. The World Ocean Circulation Experiment (WOCE) is such a programme. The WOCE Implementation Plan, also published in 1986, established the elements of the WOCE Field Programme that are necessary to achieve those scientific goals. Core project working groups and scientific panels ensure that the most effective balance of tools such as hydrography, subsurface floats, satellites and moorings are deployed to meet the scientific objective. WOCE is closely related to the International Geosphere Biosphere Programme (IGBP) and the World Climate Research Programme (WCRP). Various aspects of global climate change science are encompassed by WOCE. The heat balance of the earth involves incoming energy, mainly radiation received through the tropics, and outgoing energy, radiated fairly uniformly around the globe. A large amount (more than half) of the total heat flux is moved laterally across the globe by the oceans. Sea surface temperature is now determined globally by satellite. The Joint Global Ocean Flux Study is addressing the global carbon cycle. Tracers such as tritium, freon, have helped to qualitatively describe ocean sections. Drifting buoys have helped to describe surface ocean circulation and ALACE floats (pop-up) are describing intermediate layer circulation. Precision satellite radar altimetry has helped demonstrate the variability of ocean currents on a global scale

Alternative Shear Panel Configurations for Light Wood Construction. Development, Seismic Performance, and Design Guidance

Science.gov (United States)

Wilcoski, James; Fischer, Chad; Allison, Tim; Malach, Kelly Jo

2002-04-01

Shear panels are used in light wood construction to resist lateral loads resulting from earthquakes or strong winds. These panels are typically made of wooden sheathing nailed to building frame members, but this standard panel design interferes with the installation of sheet insulation. A non-insulated shear panel conducts heat between the building interior and exterior wasting considerable amounts of energy. Several alternative shear panel designs were developed to avoid this insulation-mounting problem and sample panels were tested according to standard cyclic test protocols. One of the alternative designs consisted of diagonal steel straps nailed directly to the structural framing. Several others consisted of sheathing nailed to 2 x 4 framing then set into a larger 2 x 6 structural frame in such a way that no sheathing protruded beyond the edge of the 2 x 6 members. Also samples of industry-standard shear panels were constructed and tested in order to establish a performance baseline. Analytical models were developed to size test panels and predict panel behavior. A procedure was developed for establishing design capacities based on both test data and established baseline panel design capacity. The behavior of each panel configuration is documented and recommended design capacities are presented.

Geolocalisation of athletes for out-of-competition drug testing: ethical considerations. Position statement by the WADA Ethics Panel.

Science.gov (United States)

Borry, Pascal; Caulfield, Timothy; Estivill, Xavier; Loland, Sigmund; McNamee, Michael; Knoppers, Bartha Maria

2018-04-01

Through the widespread availability of location-identifying devices, geolocalisation could potentially be used to place athletes during out-of-competition testing. In light of this debate, the WADA Ethics Panel formulated the following questions: (1) should WADA and/or other sponsors consider funding such geolocalisation research projects?, (2) if successful, could they be proposed to athletes as a complementary device to Anti-Doping Administration and Management System to help geolocalisation and reduce the risk of missed tests? and (3) should such devices be offered on a voluntary basis, or is it conceivable that they would be made mandatory for all athletes in registered testing pools? In this position paper, the WADA Ethics Panel concludes that the use of geolocalisation could be useful in a research setting with the goal of understanding associations between genotype, phenotype and environment; however, it recognises that the use of geolocalisation as part of or as replacement of whereabouts rules is replete with ethical concerns. While benefits remain largely hypothetical and minimal, the potential invasion of privacy and the data security threats are real. Considering the impact on privacy, data security issues, the societal ramifications of offering such services and various pragmatic considerations, the WADA Ethics Panel concludes that at this time, the use of geolocalisation should neither be mandated as a tool for disclosing whereabouts nor implemented on a voluntary basis. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

HIV rapid diagnostic testing by lay providers in a key population-led health service programme in Thailand.

Science.gov (United States)

Wongkanya, Rapeeporn; Pankam, Tippawan; Wolf, Shauna; Pattanachaiwit, Supanit; Jantarapakde, Jureeporn; Pengnongyang, Supabhorn; Thapwong, Prasopsuk; Udomjirasirichot, Apichat; Churattanakraisri, Yutthana; Prawepray, Nanthika; Paksornsit, Apiluk; Sitthipau, Thidadaow; Petchaithong, Sarayut; Jitsakulchaidejt, Raruay; Nookhai, Somboon; Lertpiriyasuwat, Cheewanan; Ongwandee, Sumet; Phanuphak, Praphan; Phanuphak, Nittaya

2018-01-01

Introduction:  Rapid diagnostic testing (RDT) for HIV has a quick turn-around time, which increases the proportion of people testing who receive their result. HIV RDT in Thailand has traditionally been performed only by medical technologists (MTs), which is a barrier to its being scaled up. We evaluated the performance of HIV RDT conducted by trained lay providers who were members of, or worked closely with, a group of men who have sex with men (MSM) and with transgender women (TG) communities, and compared it to tests conducted by MTs. Methods:  Lay providers received a 3-day intensive training course on how to perform a finger-prick blood collection and an HIV RDT as part of the Key Population-led Health Services (KPLHS) programme among MSM and TG. All the samples were tested by lay providers using Alere Determine HIV 1/2. HIV-reactive samples were confirmed by DoubleCheckGold Ultra HIV 1&2 and SD Bioline HIV 1/2. All HIV-positive and 10% of HIV-negative samples were re-tested by MTs using Serodia HIV 1/2. Results:  Of 1680 finger-prick blood samples collected and tested using HIV RDT by lay providers in six drop-in centres in Bangkok, Chiang Mai, Chonburi and Songkhla, 252 (15%) were HIV-positive. MTs re-tested these HIV-positive samples and 143 randomly selected HIV-negative samples with 100% concordant test results. Conclusion:  Lay providers in Thailand can be trained and empowered to perform HIV RDT as they were found to achieve comparable results in sample testing with MTs. Based on the task-shifting concept, this rapid HIV testing performed by lay providers as part of the KPLHS programme has great potential to enhance HIV prevention and treatment programmes among key at-risk populations.

Testing a Dutch web-based tailored lifestyle programme among adults: a study protocol

Directory of Open Access Journals (Sweden)

van Osch Liesbeth ADM

2011-02-01

Full Text Available Abstract Background Smoking, high alcohol consumption, unhealthy eating habits and physical inactivity often lead to (chronic diseases, such as cardiovascular diseases and cancer. Tailored online interventions have been proven to be effective in changing health behaviours. The aim of this study is to test and compare the effectiveness of two different tailoring strategies for changing lifestyle compared to a control group using a multiple health behaviour web-based approach. Methods In our Internet-based tailored programme, the five lifestyle behaviours of smoking, alcohol intake, fruit consumption, vegetable consumption, and physical activity are addressed. This randomized controlled trial, conducted among Dutch adults, includes two experimental groups (i.e., a sequential behaviour tailoring condition and a simultaneous behaviour tailoring condition and a control group. People in the sequential behaviour tailoring condition obtain feedback on whether their lifestyle behaviours meet the Dutch recommendations. Using a step-by-step approach, they are stimulated to continue with a computer tailored module to change only one unhealthy behaviour first. In the course of the study, they can proceed to change a second behaviour. People in the simultaneous behaviour tailoring condition receive computer tailored feedback about all their unhealthy behaviours during their first visit as a stimulation to change all unhealthy behaviours. The experimental groups can re-visit the website and can then receive ipsative feedback (i.e., current scores are compared to previous scores in order to give feedback about potential changes. The (difference in effectiveness of the different versions of the programme will be tested and compared to a control group, in which respondents only receive a short health risk appraisal. Programme evaluations will assess satisfaction with and appreciation and personal relevance of the intervention among the respondents. Finally

Development and testing of radionuclide transport models for fractured crystalline rock. An overview of the Nagra/JNC radionuclide retardation programme

International Nuclear Information System (INIS)

Ota, Kunio; Alexander, W.R.

2001-01-01

The joint Nagra/JNC radionuclide Retardation Programme has now been ongoing for more thean 10 years with the main aim of direct testing of radionuclide transport models for fractured crystalline rocks in as realistic a manner as possible. A large programme of field, laboratory and natural analogue studies has been carried out at the Grimsel Test Site in the central Swiss Alps. The understanding and modelling of both the processes and the structures influencing radionuclide transport in fractured crystalline rocks have matured as has the experimental technology, which has contributed to develop confidence in the applicability of the underlying research models in a repository performance assessment. In this report, the successes and set-backs of this programme are discussed as is the general approach to the thorough testing of the process models and of model assumptions. (author)

On the estimation and testing of predictive panel regressions

NARCIS (Netherlands)

Karabiyik, H.; Westerlund, Joakim; Narayan, Paresh

2016-01-01

Hjalmarsson (2010) considers an OLS-based estimator of predictive panel regressions that is argued to be mixed normal under very general conditions. In a recent paper, Westerlund et al. (2016) show that while consistent, the estimator is generally not mixed normal, which invalidates standard normal

Five year results of an international proficiency testing programme for measurement of antifungal drug concentrations

NARCIS (Netherlands)

Lempers, V.J.C.; Alffenaar, J.W.C.; Touw, D.J.; Burger, D.M.; Uges, D.R.A.; Aarnoutse, R.E.; Brüggemann, R.J.M.

2014-01-01

OBJECTIVES: Since 2007 the Dutch Association for Quality Assessment in Therapeutic Drug Monitoring (KKGT) has organized an international interlaboratory proficiency testing (PT) programme for measurement of antifungal drugs in plasma. We describe the 5 year results of the laboratories' performance.

Patient experience of CT colonography and colonoscopy after fecal occult blood test in a national screening programme

Energy Technology Data Exchange (ETDEWEB)

Plumb, Andrew A.; Taylor, Stuart A.; Halligan, Steve [University College London, Centre for Medical Imaging, Division of Medicine, London (United Kingdom); Ghanouni, Alex; Von Wagner, Christian [University College London, Health Behaviour Research Centre, Department of Epidemiology and Public Health, London (United Kingdom); Rees, Colin J. [Durham University School of Medicine, Pharmacy and Health, Durham (United Kingdom); Hewitson, Paul [University of Oxford, Health Services Research Unit, Nuffield Department of Population Health, Oxford (United Kingdom); Nickerson, Claire; Wright, Suzanne [Fulwood House, NHS Cancer Screening Programmes, Sheffield (United Kingdom)

2017-03-15

To investigate patient experience of CT colonography (CTC) and colonoscopy in a national screening programme. Retrospective analysis of patient experience postal questionnaires. We included screenees from a fecal occult blood test (FOBt) based screening programme, where CTC was performed when colonoscopy was incomplete or deemed unsuitable. We analyzed questionnaire responses concerning communication of test risks, test-related discomfort and post-test pain, as well as complications. CTC and colonoscopy responses were compared using multilevel logistic regression. Of 67,114 subjects identified, 52,805 (79 %) responded. Understanding of test risks was lower for CTC (1712/1970 = 86.9 %) than colonoscopy (48783/50975 = 95.7 %, p < 0.0001). Overall, a slightly greater proportion of screenees found CTC unexpectedly uncomfortable (506/1970 = 25.7 %) than colonoscopy (10,705/50,975 = 21.0 %, p < 0.0001). CTC was tolerated well as a completion procedure for failed colonoscopy (unexpected discomfort; CTC = 26.3 %: colonoscopy = 57.0 %, p < 0.001). Post-procedural pain was equally common (CTC: 288/1970,14.6 %, colonoscopy: 7544/50,975,14.8 %; p = 0.55). Adverse event rates were similar in both groups (CTC: 20/2947 = 1.2 %; colonoscopy: 683/64,312 = 1.1 %), but generally less serious with CTC. Even though CTC was reserved for individuals either unsuitable for or unable to complete colonoscopy, we found only small differences in test-related discomfort. CTC was well tolerated as a completion procedure and was extremely safe. CTC can be delivered across a national screening programme with high patient satisfaction. (orig.)

Persistence Heterogeneity Testing in Panels with Interactive Fixed Effects

DEFF Research Database (Denmark)

Ergemen, Yunus Emre; Velasco, Carlos

We consider large N,T panel data models with fixed effects, a common factor allowing for cross-section dependence, and persistent data and shocks, which are assumed fractionally integrated. In a basic setup, the main interest is on the fractional parameter of the idiosyncratic component, which...

Panel Board From Coconut Fibre And Pet Bottle

Science.gov (United States)

Ngadiman, Norhayati; Kaamin, Masiri; Abd. Kadir, Aslila; Sahat, Suhaila; Zaini, Aziza; Raihana Nor Zentan, Siti; Ain Ahmad, Nur; Amran, Wan Haizatul Aisyhah Wan

2018-03-01

The rate of global deforestation and its impact on the environment has led particle board manufacture to search for alternative feedstock, especially in countries where wood is less available compared to other cellulosic natural product. Based on the properties of coconut fibre and PET bottle, these two materials can be recycle as raw material for manufacture of panel board. As for this study, the coconut fibre were used as the filler and PET bottle as outer lining of the panel board. Two types of coconut fibre were used which are grinding and un-grinding coconut fibre. At first, the coconut fibre are undergoes softening, grinding, drying and sieving process, while PET bottle was cleaning, shredding, sieving before compacted using hydraulic hot press machine. There are four types of testing that been carried out which are swelling, water absorption, Modulus of Elasticity (MOE) and Modulus of Rupture (MOR). The result show the conventional board has the highest value for MOE test, so it's indicate that the conventional board is less strength from the coconut fibre board. As for water absorption test, the average water absorption of coconut fibre based panel board is less than conventional board. Overall, the coconut fibre board is better than conventional panel board because coconut fibre board are less swelling, has low water absorption, high modulus of rupture and low modulus of elasticity. Based on the finding, this coconut fibre panel board has potential as a stronger and long-lasting panel board than the conventional board in the market. Other than that, the panel also have their own aesthetic value since the recycled plastic bottle used as outer lining is colourful and giving aesthetic value.

Computer control and data acquisition system for the R.F. Test Facility

International Nuclear Information System (INIS)

Stewart, K.A.; Burris, R.D.; Mankin, J.B.; Thompson, D.H.

1986-01-01

The Radio Frequency Test Facility (RFTF) at Oak Ridge National Laboratory, used to test and evaluate high-power ion cyclotron resonance heating (ICRH) systems and components, is monitored and controlled by a multicomponent computer system. This data acquisition and control system consists of three major hardware elements: (1) an Allen-Bradley PLC-3 programmable controller; (2) a VAX 11/780 computer; and (3) a CAMAC serial highway interface. Operating in LOCAL as well as REMOTE mode, the programmable logic controller (PLC) performs all the control functions of the test facility. The VAX computer acts as the operator's interface to the test facility by providing color mimic panel displays and allowing input via a trackball device. The VAX also provides archiving of trend data acquired by the PLC. Communications between the PLC and the VAX are via the CAMAC serial highway. Details of the hardware, software, and the operation of the system are presented in this paper

Development of Electrostatically Clean Solar Array Panels

Science.gov (United States)

Stern, Theodore G.

2000-01-01

Certain missions require Electrostatically Clean Solar Array (ECSA) panels to establish a favorable environment for the operation of sensitive scientific instruments. The objective of this program was to demonstrate the feasibility of an ECSA panel that minimizes panel surface potential below 100mV in LEO and GEO charged particle environments, prevents exposure of solar cell voltage and panel insulating surfaces to the ambient environment, and provides an equipotential, grounded structure surrounding the entire panel. An ECSA panel design was developed that uses a Front Side Aperture-Shield (FSA) that covers all inter-cell areas with a single graphite composite laminate, composite edge clips for connecting the FSA to the panel substrate, and built-in tabs that interconnect the FSA to conductive coated coverglasses using a conductive adhesive. Analysis indicated the ability of the design to meet the ECSA requirements. Qualification coupons and a 0.5m x 0.5m prototype panel were fabricated and tested for photovoltaic performance and electrical grounding before and after exposure to acoustic and thermal cycling environments. The results show the feasibility of achieving electrostatic cleanliness with a small penalty in mass, photovoltaic performance and cost, with a design is structurally robust and compatible with a wide range of current solar panel technologies.

Buckling Testing and Analysis of Honeycomb Sandwich Panel Arc Segments of a Full-Scale Fairing Barrel: Comparison of In- and Out-of-Autoclave Facesheet Configurations

Science.gov (United States)

Pineda, Evan Jorge; Myers, David E.; Kosareo, Daniel N.; Zalewski, Bart F.; Kellas, Sotiris; Dixon, Genevieve D.; Krivanek, Thomas M.; Gyekenyesi, Thomas G.

2014-01-01

Four honeycomb sandwich panels, representing 1/16th arc segments of a 10-m diameter barrel section of the Heavy Lift Launch Vehicle, were manufactured and tested under the NASA Composites for Exploration and the NASA Constellation Ares V programs. Two configurations were chosen for the panels: 6-ply facesheets with 1.125 in. honeycomb core and 8-ply facesheets with 1.0 in. honeycomb core. Additionally, two separate carbon fiber/epoxy material systems were chosen for the facesheets: in-autoclave IM7/977-3 and out-of-autoclave T40-800b/5320-1. Smaller 3 ft. by 5 ft. panels were cut from the 1/16th barrel sections and tested under compressive loading. Furthermore, linear eigenvalue and geometrically nonlinear finite element analyses were performed to predict the compressive response of each 3 ft. by 5 ft. panel. To improve the robustness of the geometrically nonlinear finite element model, measured surface imperfections were included in the geometry of the model. Both the linear and nonlinear models yielded good qualitative and quantitative predictions. Additionally, it was correctly predicted that the panel would fail in buckling prior to failing in strength. Furthermore, several imperfection studies were performed to investigate the influence of geometric imperfections, fiber angle misalignments, and three-dimensional effects on the compressive response of the panel.

Intermediate-scale Fire Performance of Composite Panels under Varying Loads

Energy Technology Data Exchange (ETDEWEB)

Brown, Alexander [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Jernigan, Dann A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Dodd, Amanda B. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2015-04-01

New aircraft are being designed with increasing quantities of composite materials used in their construction. Different from the more traditional metals, composites have a higher propensity to burn. This presents a challenge to transportation safety analyses, as the aircraft structure now represents an additional fuel source involved in the fire scenario. Most of the historical fire testing of composite materials is aime d at studying kinetics, flammability or yield strength under fire conditions. Most of this testing is small - scale. Heterogeneous reactions are often length - scale dependent, and this is thought to be particularly true for composites which exhibit signific ant microscopic dynamics that can affect macro - scale behavior. We have designed a series of tests to evaluate composite materials under various structural loading conditions with a consistent thermal condition. We have measured mass - loss , heat flux, and temperature throughout the experiments. Several types of panels have been tested, including simple composite panels, and sandwich panels. The main objective of the testing was to understand the importance of the structural loading on a composite to its b ehavior in response to fire - like conditions. During flaming combustion at early times, there are some features of the panel decomposition that are unique to the type of loading imposed on the panels. At load levels tested, fiber reaction rates at later t imes appear to be independent of the initial structural loading.

An innovative deployable solar panel system for Cubesats

Science.gov (United States)

Santoni, Fabio; Piergentili, Fabrizio; Donati, Serena; Perelli, Massimo; Negri, Andrea; Marino, Michele

2014-02-01

One of the main Cubesat bus limitations is the available on-board power. The maximum power obtained using body mounted solar panels and advanced triple junction solar cells on a triple unit Cubesat is typically less than 10 W. The Cubesat performance and the mission scenario opened to these small satellite systems could be greatly enhanced by an increase of the available power. This paper describes the design and realization of a modular deployable solar panel system for Cubesats, consisting of a modular hinge and spring system that can be potentially used on-board single (1U), double(2U), triple (3U) and six units (6U) Cubesats. The size of each solar panels is the size of a lateral Cubesat surface. The system developed is the basis for a SADA (Solar Array Drive Assembly), in which a maneuvering capability is added to the deployed solar array in order to follow the apparent motion of the sun. The system design trade-off is discussed, comparing different deployment concepts and architectures, leading to the final selection for the modular design. A prototype of the system has been realized for a 3U Cubesat, consisting of two deployable solar panel systems, made of three solar panels each, for a total of six deployed solar panels. The deployment system is based on a plastic fiber wire and thermal cutters, guaranteeing a suitable level of reliability. A test-bed for the solar panel deployment testing has been developed, supporting the solar array during deployment reproducing the dynamical situation in orbit. The results of the deployment system testing are discussed, including the design and realization of the test-bed, the mechanical stress given to the solar cells by the deployment accelerations and the overall system performance. The maximum power delivered by the system is about 50.4 W BOL, greatly enhancing the present Cubesat solar array performance.

Provider-initiated testing and counselling programmes in sub-Saharan Africa: a systematic review of their operational implementation.

Science.gov (United States)

Roura, Maria; Watson-Jones, Deborah; Kahawita, Tanya M; Ferguson, Laura; Ross, David A

2013-02-20

The routine offer of an HIV test during patient-provider encounters is gaining momentum within HIV treatment and prevention programmes. This review examined the operational implementation of provider-initiated testing and counselling (PITC) programmes in sub-Saharan Africa. PUBMED, EMBASE, Global Health, COCHRANE Library and JSTOR databases were searched systematically for articles published in English between January 2000 and November 2010. Grey literature was explored through the websites of international and nongovernmental organizations. Eligibility of studies was based on predetermined criteria applied during independent screening by two researchers. We retained 44 studies out of 5088 references screened. PITC polices have been effective at identifying large numbers of previously undiagnosed individuals. However, the translation of policy guidance into practice has had mixed results, and in several studies of routine programmes the proportion of patients offered an HIV test was disappointingly low. There were wide variations in the rates of acceptance of the test and poor linkage of those testing positive to follow-up assessments and antiretroviral treatment. The challenges encountered encompass a range of areas from logistics, to data systems, human resources and management, reflecting some of the weaknesses of health systems in the region. The widespread adoption of PITC provides an unprecedented opportunity for identifying HIV-positive individuals who are already in contact with health services and should be accompanied by measures aimed at strengthening health systems and fostering the normalization of HIV at community level. The resources and effort needed to do this successfully should not be underestimated.

Panel Board From Coconut Fibre And Pet Bottle

Directory of Open Access Journals (Sweden)

Ngadiman Norhayati

2018-01-01

Full Text Available The rate of global deforestation and its impact on the environment has led particle board manufacture to search for alternative feedstock, especially in countries where wood is less available compared to other cellulosic natural product. Based on the properties of coconut fibre and PET bottle, these two materials can be recycle as raw material for manufacture of panel board. As for this study, the coconut fibre were used as the filler and PET bottle as outer lining of the panel board. Two types of coconut fibre were used which are grinding and un-grinding coconut fibre. At first, the coconut fibre are undergoes softening, grinding, drying and sieving process, while PET bottle was cleaning, shredding, sieving before compacted using hydraulic hot press machine. There are four types of testing that been carried out which are swelling, water absorption, Modulus of Elasticity (MOE and Modulus of Rupture (MOR. The result show the conventional board has the highest value for MOE test, so it’s indicate that the conventional board is less strength from the coconut fibre board. As for water absorption test, the average water absorption of coconut fibre based panel board is less than conventional board. Overall, the coconut fibre board is better than conventional panel board because coconut fibre board are less swelling, has low water absorption, high modulus of rupture and low modulus of elasticity. Based on the finding, this coconut fibre panel board has potential as a stronger and long-lasting panel board than the conventional board in the market. Other than that, the panel also have their own aesthetic value since the recycled plastic bottle used as outer lining is colourful and giving aesthetic value.

Fracture Analysis of the FAA/NASA Wide Stiffened Panels

Science.gov (United States)

Seshadri, B. R.; Newman, J. C., Jr.; Dawicke, D. S.; Young, R. D.

1999-01-01

This paper presents the fracture analyses conducted on the FAA/NASA stiffened and unstiffened panels using the STAGS (STructural Analysis of General Shells) code with the critical crack-tip-opening angle (CTOA) fracture criterion. The STAGS code with the "plane-strain" core option was used in all analyses. Previous analyses of wide, flat panels have shown that the high-constraint conditions around a crack front, like plane strain, has to be modeled in order for the critical CTOA fracture criterion to predict wide panel failures from small laboratory tests. In the present study, the critical CTOA value was determined from a wide (unstiffened) panel with anti-buckling guides. The plane-strain core size was estimated from previous fracture analyses and was equal to about the sheet thickness. Rivet flexibility and stiffener failure was based on methods and criteria, like that currently used in industry. STAGS and the CTOA criterion were used to predict load-against-crack extension for the wide panels with a single crack and multiple-site damage cracking at many adjacent rivet holes. Analyses were able to predict stable crack growth and residual strength within a few percent (5%) of stiffened panel tests results but over predicted the buckling failure load on an unstiffened panel with a single crack by 10%.

An implementation evaluation of a voluntary counselling and testing programme for the human immunodeficiency virus (HIV and acquired immunodeficiency syndrome (AIDS

Directory of Open Access Journals (Sweden)

Tarryn N. Anderson

2012-07-01

Research purpose: The purpose of this evaluation was to assess whether or not a Voluntary Counselling and Testing (VCT programme for HIV and AIDS, at a South African university, was implemented as intended. Motivation for the study: The evaluators were motivated to explore indications in the existing literature about these programmes that participants in VCT programmes are often not the intended target population who live a high risk lifestyle. Research design, approach and method: A descriptive design was used to evaluate service utlisation, service delivery and organisational support. Questionnaire data from 285 respondents who participated in the programme and programme records supplied by the programme staff were consulted to answer the evaluation questions. Main findings: The evaluation showed that the highest uptake for the programme occurred amongst female students. The low uptake amongst men was a concern. It was found that the programme was delivered as intended and that there were enough resources to implement it according to standards set. Practical/managerial implications: The systematic report on the programme process provided the programme managers with practical suggestions for programme improvement. Contribution/value-add: This was the first implementation evaluation of a VCT programme in a South African university context. As such it aimed to educate programme managers to think evaluatively about introducing new or continuing existing programmes.

Current and prospective fuel test programmes in the MIR reactor

Energy Technology Data Exchange (ETDEWEB)

Izhutov, A.L.; Burukin, A.V.; Iljenko, S.A.; Ovchinnikov, V.A.; Shulimov, V.N.; Smirnov, V.P. [State Scientific Centre of Russia Research Institute of Atomic Reactors, Ulyanovsk region (Russian Federation)

2007-07-01

MIR reactor is a heterogeneous thermal reactor with a moderator and a reflector made of metal beryllium, it has a channel-type design and is placed in a water pool. MIR reactor is mainly designed for testing fragments of fuel elements and fuel assemblies (FA) of different nuclear power reactor types under normal (stationary and transient) operating conditions as well as emergency situations. At present six test loop facilities are being operated (2 PWR loops, 2 BWR loops and 2 steam coolant loops). The majority of current fuel tests is conducted for improving and upgrading the Russian PWR fuel, these tests involve issues such as: -) long term tests of short-size rods with different modifications of cladding materials and fuel pellets; -) further irradiation of power plant re-fabricated and full-size fuel rods up to achieving 80 MW*d/kg U; -) experiments with leaking fuel rods at different burnups and under transient conditions; -) continuation of the RAMP type experiments at high burnup of fuel; and -) in-pile tests with simulation of LOCA and RIA type accidents. Testing of the LEU (low enrichment uranium) research reactor fuel is conducted within the framework of the RERTR programme. Upgrading of the gas cooled and steam cooled loop facilities is scheduled for testing the HTGR fuel and sub-critical water-cooled reactor, correspondingly. The present paper describes the major programs of the WWER high burn-up fuel behavior study in the MIR reactor, capabilities of the applied techniques and some results of the performed irradiation tests. (authors)

Research Program Tests for the U.S. Defense Special Weapons Agency (DSWA) for Breaching of Concrete Panels Set Against a Sandstone Rock Wall

National Research Council Canada - National Science Library

Harvey, Kent

2006-01-01

...) Determine the difficulties and nuances of drilling behind wall test panels 3) Test different blast hole sizes, blast hole locations, and blasting sequences in an effort to identify the advantages and disadvantages of different breaching approaches...

Panel Analysis

DEFF Research Database (Denmark)

Brænder, Morten; Andersen, Lotte Bøgh

2014-01-01

Based on our 2013-article, ”Does Deployment to War Affect Soldiers' Public Service Motivation – A Panel Study of Soldiers Before and After their Service in Afghanistan”, we present Panel Analysis as a methodological discipline. Panels consist of multiple units of analysis, observed at two or more...... in research settings where it is not possible to distribute units of analysis randomly or where the independent variables cannot be manipulated. The greatest disadvantage in regard to using panel studies is that data may be difficult to obtain. This is most clearly vivid in regard to the use of panel surveys...... points in time. In comparison with traditional cross-sectional studies, the advantage of using panel studies is that the time dimension enables us to study effects. Whereas experimental designs may have a clear advantage in regard to causal inference, the strength of panel studies is difficult to match...

X-ray performance of a wafer-scale CMOS flat panel imager for applications in medical imaging and nondestructive testing

International Nuclear Information System (INIS)

Cha, Bo Kyung; Jeon, Seongchae; Seo, Chang-Woo

2016-01-01

This paper presents a wafer-scale complementary metal-oxide semiconductor (CMOS)-based X-ray flat panel detector for medical imaging and nondestructive testing applications. In this study, our proposed X-ray CMOS flat panel imager has been fabricated by using a 0.35 µm 1-poly/4-metal CMOS process. The pixel size is 100 µm×100 µm and the pixel array format is 1200×1200 pixels, which provide a field-of-view (FOV) of 120mm×120 mm. The 14.3-bit extended counting analog-to digital converter (ADC) with built-in binning mode was used to reduce the area and simultaneously improve the image resolution. The different screens such as thallium-doped CsI (CsI:Tl) and terbium gadolinium oxysulfide (Gd_2O_2S:Tb) scintillators were used as conversion materials for X-rays to visible light photons. The X-ray imaging performance such as X-ray sensitivity as a function of X-ray exposure dose, spatial resolution, image lag and X-ray images of various objects were measured under practical medical and industrial application conditions. This paper results demonstrate that our prototype CMOS-based X-ray flat panel imager has the significant potential for medical imaging and non-destructive testing (NDT) applications with high-resolution and high speed rate.

X-ray performance of a wafer-scale CMOS flat panel imager for applications in medical imaging and nondestructive testing

Energy Technology Data Exchange (ETDEWEB)

Cha, Bo Kyung, E-mail: goldrain99@kaist.ac.kr [Advanced Medical Device Research Center, Korea Electrotechnology Research Institute, Ansan (Korea, Republic of); Jeon, Seongchae [Advanced Medical Device Research Center, Korea Electrotechnology Research Institute, Ansan (Korea, Republic of); Seo, Chang-Woo [Department of Radiological Science, Yonsei University, Gangwon-do 220-710 (Korea, Republic of)

2016-09-21

This paper presents a wafer-scale complementary metal-oxide semiconductor (CMOS)-based X-ray flat panel detector for medical imaging and nondestructive testing applications. In this study, our proposed X-ray CMOS flat panel imager has been fabricated by using a 0.35 µm 1-poly/4-metal CMOS process. The pixel size is 100 µm×100 µm and the pixel array format is 1200×1200 pixels, which provide a field-of-view (FOV) of 120mm×120 mm. The 14.3-bit extended counting analog-to digital converter (ADC) with built-in binning mode was used to reduce the area and simultaneously improve the image resolution. The different screens such as thallium-doped CsI (CsI:Tl) and terbium gadolinium oxysulfide (Gd{sub 2}O{sub 2}S:Tb) scintillators were used as conversion materials for X-rays to visible light photons. The X-ray imaging performance such as X-ray sensitivity as a function of X-ray exposure dose, spatial resolution, image lag and X-ray images of various objects were measured under practical medical and industrial application conditions. This paper results demonstrate that our prototype CMOS-based X-ray flat panel imager has the significant potential for medical imaging and non-destructive testing (NDT) applications with high-resolution and high speed rate.

Effect of panel shape of soccer ball on its flight characteristics

Science.gov (United States)

Hong, Sungchan; Asai, Takeshi

2014-05-01

Soccer balls are typically constructed from 32 pentagonal and hexagonal panels. Recently, however, newer balls named Cafusa, Teamgeist 2, and Jabulani were respectively produced from 32, 14, and 8 panels with shapes and designs dramatically different from those of conventional balls. The newest type of ball, named Brazuca, was produced from six panels and will be used in the 2014 FIFA World Cup in Brazil. There have, however, been few studies on the aerodynamic properties of balls constructed from different numbers and shapes of panels. Hence, we used wind tunnel tests and a kick-robot to examine the relationship between the panel shape and orientation of modern soccer balls and their aerodynamic and flight characteristics. We observed a correlation between the wind tunnel test results and the actual ball trajectories, and also clarified how the panel characteristics affected the flight of the ball, which enabled prediction of the trajectory.

Efficiency of solar radiation conversion in photovoltaic panels

OpenAIRE

Kurpaska Sławomir; Knaga Jarosław; Latała Hubert; Sikora Jakub; Tomczyk Wiesław

2018-01-01

This paper included analysis the conversion efficiency in photovoltaic panels. The tests were done between February and June at a test stand equipped with three commonly used types of photovoltaic panels: poly- and monocrystalline silicon and with semi-conductive layer made of copper (Cu), indium (In), gallium (Ga) and selenium (Se) (CIGS). Five days of each month were selected for a detailed analysis. They were close to the so-called recommended day for calculations in solar power engineerin...

Component and prototype panel testing of the mini-dome Fresnel lens photovoltaic concentrator array

Science.gov (United States)

Piszczor, Michael F.; Swartz, Clifford K.; O'Neill, Mark J.

1990-01-01

The mini-dome Fresnel lens concentrator array, a high-efficiency, lightweight space photovoltaic array concept, is described. The three critical elements of the array concept are the Fresnel lens concentrator, the prismatic cell power cover, and the photovoltaic cell. Prototype concentrator lenses have been fabricated and tested, with optical efficiencies reaching 90 percent. Work is progressing on the design and fabrication of the panel structure. The impact of recent advances in 30 percent-efficient multijunction photovoltaic cells on array performance is also discussed. Near-term performance goals of 300 w/sq m and 100 w/kg are now feasible.

Dengeleme Teorisi’nin Geçerliliğinin Panel Veri Analizi ile Test Edilmesi: BİST’de Ampirik Bir Uygulama(Testing the Validity of Trade-Off Theory by Using Panel Regression Analysis: An Empirical Application on ISE

Directory of Open Access Journals (Sweden)

İbrahim BOZKURT

2014-12-01

Full Text Available The aim of this study is to test the validity of Trade-Off theory by investigating the relationship between capital structures and market values of firms on ISE. In this study, 127.008 financial ratio, 20.664 monthly stock return, 4.704 market value and debt ratio which are belong to 168 firms traded on ISE between 2005 and 2011 is used. Firstly, efficient model predicting bankruptcy is confirmed by using balanced panel regression analysis for ISE. Secondly, by using efficient model, firms are divided two groups that consist of firms which have or not bankruptcy risk for each period and the relationship market values and debt levels of firms in each group is analyzed by using unbalanced panel regression analysis. The results of the analysis reveal that there is positive relationship between market values and debt levels of firms in terms of both groups. This result implies that Trade-Off theory is not validity on ISE.

Evaluation of the third community programme 'Radioactive waste management and storage' (1985-1989)

International Nuclear Information System (INIS)

Guillaumont, G.; Cottenie, A.; Harrisson, J.; Schmitt-Tegge, J.D.; Schuettenhelm, R.T.E.; Wright, J.K.

1989-01-01

This evaluation report fits into the general framework of the Commission's evaluation policy (submitted in the form of a plan of action to the Council. O.J.C14 20.01.87). For the production of evaluation reports of Community research programmes, this plan envisages the use of independent external experts. The report consists of the following six chapters: - A general introduction covering the basis and procedure of the work, - An executive summary, available in each of the Community official languages, - A general review of the problems of radioactive waste, - The main reports, representing the actual evaluation of the programme, - The conclusion, which summarizes the main points, - Finally, policy action recommendations, followed by a recapitulation of the more specific recommendation from chapter IV and by a special note on the problem of public acceptance. At the end of the volume, annexes are added that provide the terms of reference given to the panel, list several more detailed documents which were used by the panel during the evaluation, and list people visited or interviewed by the evaluators

Quality assurance for antimicrobial susceptibility testing of Neisseria gonorrhoeae in Latin American and Caribbean countries, 2013-2015.

Science.gov (United States)

Sawatzky, Pam; Martin, Irene; Galarza, Patricia; Carvallo, Marıa Elena Trigoso; Araya Rodriguez, Pamela; Cruz, Olga Marina Sanabria; Hernandez, Alina Llop; Martinez, Mario Fabian; Borthagaray, Graciela; Payares, Daisy; Moreno, José E; Chiappe, Marina; Corredor, Aura Helena; Thakur, Sidharath Dev; Dillon, Jo-Anne R

2018-04-19

A Neisseria gonorrhoeae antimicrobial susceptibility quality control comparison programme was re-established in Latin America and the Caribbean to ensure antimicrobial susceptibility data produced from the region are comparable nationally and internationally. Three panels, consisting of N. gonorrhoeae isolates comprising reference strains and other characterised isolates were sent to 11 participating laboratories between 2013 and 2015. Antimicrobial susceptibilities for these isolates were determined using agar dilution, Etest or disc diffusion methods. Modal minimum inhibitory concentrations (MICs) for each panel isolate/antibiotic combination were calculated. The guidelines of the Clinical and Laboratory Standards Institute were used for interpretations of antimicrobial susceptibility. The agreement of MICs with the modal MICs was determined for each of the participating laboratories as well as for each of the antibiotics tested. Five of 11 laboratories that participated in at least one panel had an overall average agreement between participants' MIC results and modal MICs of >90%. For other laboratories, agreements ranged from 60.0% to 82.4%. The proportion of agreement between interpretations for all the antibiotics, except penicillin and tetracycline, was >90%. The percentages of agreement between MIC results and their modes for erythromycin, spectinomycin, cefixime and azithromycin were >90%. Tetracycline, ceftriaxone and ciprofloxacin agreement ranged from 84.5% to 89.1%, while penicillin had 78.8% agreement between MICs and modal MICs. The participating laboratories had acceptable results, similar to other international quality assurance programmes. It is important to ensure continuation of the International Gonococcal Antimicrobial Susceptibility Quality Control Comparison Programme to ensure that participants can identify and correct any problems in antimicrobial susceptibility testing for N. gonorrhoeae as they arise and continue to generate reproducible

Manufacturing and Structural Feasibility of Natural Fiber Reinforced Polymeric Structural Insulated Panels for Panelized Construction

Directory of Open Access Journals (Sweden)

Nasim Uddin

2011-01-01

Full Text Available Natural fibers are emerging in the fields of automobile and aerospace industries to replace the parts such as body panels, seats, and other parts subjected to higher bending strength. In the construction industries, they have the potential to replace the wood and oriented strand boards (OSB laminates in the structural insulated panels (SIPs. They possess numerous advantages over traditional OSB SIPs such as being environmental friendly, recyclable, energy efficient, inherently flood resistant, and having higher strength and wind resistance. This paper mainly focuses on the manufacturing feasibility and structural characterization of natural fiber reinforced structural insulated panels (NSIPs using natural fiber reinforced polymeric (NFRP laminates as skin. To account for the use of natural fibers, the pretreatments are required on natural fibers prior to use in NFRP laminates, and, to address this issue properly, the natural fibers were given bleaching pretreatments. To this end, flexure test and low-velocity impact (LVI tests were carried out on NSIPs in order to evaluate the response of NSIPs under sudden impact loading and uniform bending conditions typical of residential construction. The paper also includes a comparison of mechanical properties of NSIPs with OSB SIPs and G/PP SIPs. The results showed significant increase in the mechanical properties of resulting NSIP panels mainly a 53% increase in load-carrying capacity compared to OSB SIPs. The bending modulus of NSIPs is 190% higher than OSB SIPs and 70% weight reduction compared to OSB SIPs.

ITER test programme

International Nuclear Information System (INIS)

Abdou, M.; Baker, C.; Casini, G.

1991-01-01

ITER has been designed to operate in two phases. The first phase which lasts for 6 years, is devoted to machine checkout and physics testing. The second phase lasts for 8 years and is devoted primarily to technology testing. This report describes the technology test program development for ITER, the ancillary equipment outside the torus necessary to support the test modules, the international collaboration aspects of conducting the test program on ITER, the requirements on the machine major parameters and the R and D program required to develop the test modules for testing in ITER. 15 refs, figs and tabs

Ethical evaluation of research proposals by ethics panels advising the European Commission.

Science.gov (United States)

Kolar, Roman

2004-06-01

Ethical principles with regard to animal experimentation are referred to in European Union (EU) legislation and other official documents. Therefore, applications for funding of research under the EU's research programme may undergo an ethical review that is carried out by so-called ethics panels, consisting of experts chosen by the European Commission. The work of these panels differs substantially from that of other ethical committees, as they exist on the institutional, local, regional or national level. Their main purpose is not to decide whether a proposed research can be regarded legal, and therefore should be endorsed or licensed; instead, it is to help the Commission in prioritising its funding. The panels may examine other ethical aspects than those of animal experimentation or animal welfare alone, such as the use of human volunteers. This is reflected by the composition of the panels. Their decisions are normally based on consensus. Even though these decisions may refer to EU legislation, the criteria applied are not restricted to those provided by this legislation. Nevertheless, the various aspects of the Commission's ethical evaluation system (e.g. formal and practical basic conditions, information content of applications, type of decisions taken, lacking of any quality control) offers opportunities for improvement.

The DIVA programme: General presentation and first results

International Nuclear Information System (INIS)

Dumaz, P.; Duc, B.

2000-01-01

The French 'Commissariat a I'Energie Atomique' (CEA/DRN, Nuclear Reactor Division) is carrying out a new programme devoted to the thermal-hydraulics of steam injectors. This programme was called DIVA. Both experimental and theoretical works are planned. Motivations, objectives, test facility and test section dimensioning of this new programme are presented. A first test series was just performed. The validation of the test section dimensioning and experimental procedures was obtained. These first experimental data are presented and preliminary analyses are given. (author)

Mediterranean fruit fly preventative release programme in southern California

International Nuclear Information System (INIS)

Dowell, Robert V.; Meyer, Fred; Siddiqu, Isi A.; Leon Spaugy, E.

2000-01-01

adjacent areas in Mexico are developing an area-wide pink bollworm eradication programme that will use sterile moths as its primary management tool. In 1993, CDFA found itself faced with a Medfly situation that required a change in the methodology used to eradicate such Medfly infestations were eradicated from California. Medfly infestations had been found each year since 1987 with the number of wild Medflies detected decreasing only after a large aerial malathion and bait spray programme in 1989-90 (Dowell et al. 1999). Four hundred wild Medfly adults were trapped in 39 cities in five southern California counties in 1993; these finds represented 35 discrete core infestations whose treatment boundaries were merging together as had been seen in 1989-90 (Dowell and Penrose 1995, Penrose 1996). In response, the USDA formed an international Medfly science advisory panel to help develop a proactive approach to dealing with Medfly invasions in southern California. Based on advice from this panel, the CDFA /USDA/County Agricultural Commissioners (CAC) began a Medfly sterile release programme on 1 March 1994 over a 3,791 km 2 area of the Los Angeles basin to eradicate extant Medfly infestations. This basin-wide programme used the continuous release of 96,500 sterile Medflies per km 2 per week for a two-year period. The release rate was the upper limit of that used successfully in Mexico in their Medfly eradication/exclusion programme (Schwarz et al. 1989). Prior to the start of the basin-wide programme, ground sprays of malathion and bait were applied to all hosts within a 200 m radius of all fly finds. The basin-wide programme was designed to eradicate all extant Medfly infestations, and to prevent new infestations from becoming established (Dowell and Penrose 1995). The capture of wild Medflies within the treatment boundaries dropped from 400 in 1993 to no wild Medflies in 1995. In 1996, a single, unusually desiccated, undyed male Medfly was trapped the day after the programme

Development of quality assurance programme for prescribed ionizing radiation source testing. Recommendations

International Nuclear Information System (INIS)

1999-01-01

The document gives guidance to those applying for licence to perform ionizing radiation source acceptance tests and long-term stability tests and provides information which should be known when introducing quality assurance systems in compliance with legislative requirements. It is envisaged that this document ('Recommendations') will form a basis for final Safety Guides to be issued by the State Office for Nuclear Safety, the Czech nuclear regulatory authority. The setup of the publication is as follows. Part I gives a glossary of basic terms in quality systems. Part 2 explains quality system principles, paying special attention to radiation safety issues, and describes the structure and scope of quality system documentation. Part 3 explains the individual elements of the quality system and gives practical examples. Part 4 deals with the quality assurance programme; using instructions and practical examples, this part shows how the quality system elements should be applied to long-time stability testing and acceptance testing. A model structure of 2nd degree documentation (guidelines) and a model testing protocol are given in annexes. (P.A.)

Fatigue behavior of wood-fiber-based tri-axial engineered sandwich composite panels (ESCP)

Science.gov (United States)

Jinghao Li; John F. Hunt; Shaoqin Gong; Zhiyong Cai

2015-01-01

The static and fatigue bending behavior of wood-fiber-based tri-axial engineered sandwich composite panels (ESCP) has been investigated by four-point bending tests. Fatigue panels and weakened panels (wESCP) with an initial interface defect were manufactured for the fatigue tests. Stress σ vs. number of cycles curves (S-N) were recorded under the different stress...

Lateral resistance of plybamboo wall-panels

OpenAIRE

Gonzalez Beltran, G.E.; Herwijnen, van, F.; Janssen, J.J.A.; Moonen, S.P.G.; Gutierrez, J.A.

2003-01-01

This paper deals with the experimental and theoretical behavior of plybamboo (kind of plywood made out of bamboo) wall-panels subjected to lateral load. The wall-panels are part of a house design method proposed in the author's PhD thesis for prefabricated social housing in developing countries. Sixteen fullscaled wallpanels with or without window and door openings were tested and their theoretical capacities estimated. Design wind and seismic loads were determined according to the Internatio...

Will initiatives to promote hydroelectricity consumption be effective? Evidence from univariate and panel LM unit root tests with structural breaks

International Nuclear Information System (INIS)

Lean, Hooi Hooi; Smyth, Russell

2014-01-01

This paper examines whether initiatives to promote hydroelectricity consumption are likely to be effective by applying univariate and panel Lagrange Multiplier (LM) unit root tests to hydroelectricity consumption in 55 countries over the period 1965–2011. We find that for the panel, as well as about four-fifths of individual countries, that hydroelectricity consumption is stationary. This result implies that shocks to hydroelectricity consumption in most countries will only result in temporary deviations from the long-run growth path. An important consequence of this finding is that initiatives designed to have permanent positive effects on hydroelectricity consumption, such as large-scale dam construction, are unlikely to be effective in increasing the share of hydroelectricity, relative to consumption of fossil fuels. - Highlights: • Applies unit root tests to hydroelectricity consumption. • Hydroelectricity consumption is stationary. • Shocks to hydroelectricity consumption result in temporary deviations from the long-run growth path

Increasing the efficiency of solar thermal panels

Science.gov (United States)

Dobrnjac, M.; Latinović, T.; Dobrnjac, S.; Živković, P.

2016-08-01

The popularity of solar heating systems is increasing for several reasons. These systems are reliable, adaptable and pollution-free, because the renewable solar energy is used. There are many variants of solar systems in the market mainly constructed with copper pipes and absorbers with different quality of absorption surface. Taking into account the advantages and disadvantages of existing solutions, in order to increase efficiency and improve the design of solar panel, the innovative solution has been done. This new solar panel presents connection of an attractive design and the use of constructive appropriate materials with special geometric shapes. Hydraulic and thermotechnical tests that have been performed on this panel showed high hydraulic and structural stability. Further development of the solar panel will be done in the future in order to improve some noticed disadvantages.

Occurrence of sea spider Endeis mollis Carpenter (Arthropoda: Pycnogonida on the test panels submerged in Gulf of Mannar, southeast coast of India

Directory of Open Access Journals (Sweden)

S. Satheesh

2012-06-01

Full Text Available Sea spiders (Pycnogonids are exclusively marine arthropods with worldwide distribution. Pycnogonida remains one of the poorly investigated groups encountered in fouling communities. In the present study, distribution pycnogonid species Endeis mollis associated with the fouling community developed on test panels submerged at Kudankulam coast, Gulf of Mannar was studied for a period of two years. Throughout the period of investigation, Endeis mollis was observed on the test panels. A maximum of 55 individuals per square dm was observed during pre-monsoon season and a minimum of 9 individuals per square dm during monsoon season. Results of this study on seasonal distribution are of considerable interest because so little has been documented on the ecology of Pycnogonids in India.

MPPT algorithm test on a photovoltaic emulating system constructed by a DC power supply and an indoor solar panel

International Nuclear Information System (INIS)

Zhou, Z.; Holland, P.M.; Igic, P.

2014-01-01

Highlights: • A novel PV emulator is constructed by using conventional solar panels with a DC power supply. • The proposed PV emulator is cost-effectiveness, relatively easy implementation. • The proposed PV emulator avoids the bandwidth problem associated with electronics PV emulators. • Indoor testing of MPPT algorithms and power converters avoids the dependency on solar irradiation. • The PV emulating system has been used for testing a P and O MPPT algorithm and a boost dc converter. - Abstract: In this paper a novel photovoltaic (PV) emulating scheme for testing maximum power point tracking (MPPT) algorithms and PV inverters has been proposed. It is constructed by the parallel connection of conventional solar panels with a DC power supply operating in current source mode. The advantages of the proposed scheme are cost-effectiveness, relatively easy implementation and indoor testing of MPPT algorithms and power converters avoiding weather and time of day dependency on solar irradiation levels. Furthermore, the proposed PV emulator avoids the bandwidth problem associated with the dc converter based PV emulating systems. Detailed circuit connection, parameters, electrical characteristics and mathematical model of the PV emulator are presented and discussed. Proposed PV emulating system has been used to test a boost DC/DC converter controlled by Perturb and Observe (P and O) MPPT algorithm. Test results confirmed the effectiveness of the proposed PV emulation system and all achieved results correspond well to the original designed values

Reaching national consensus on the core clinical skill outcomes for family medicine postgraduate training programmes in South Africa.

Science.gov (United States)

Akoojee, Yusuf; Mash, Robert

2017-05-26

Family physicians play a significant role in the district health system and need to be equipped with a broad range of clinical skills in order to meet the needs and expectations of the communities they serve. A previous study in 2007 reached national consensus on the clinical skills that should be taught in postgraduate family medicine training prior to the introduction of the new speciality. Since then, family physicians have been trained, employed and have gained experience of working in the district health services. The national Education and Training Committee of the South African Academy of Family Physicians, therefore, requested a review of the national consensus on clinical skills for family medicine training. A Delphi technique was used to reach national consensus in a panel of 17 experts: family physicians responsible for training, experienced family physicians in practice and managers responsible for employing family physicians. Consensus was reached on 242 skills from which the panel decided on 211 core skills, 28 elective skills and 3 skills to be deleted from the previous list. The panel was unable to reach consensus on 11 skills. The findings will guide training programmes on the skills to be addressed and ensure consistency across training programmes nationally. The consensus will also guide formative assessment as documented in the national portfolio of learning and summative assessment in the national exit examination. The consensus will be of interest to other countries in the region where training programmes in family medicine are developing.

Testing for bubbles in housing markets: a panel data approach

Czech Academy of Sciences Publication Activity Database

Mikhed, V.; Zemčík, Petr

2009-01-01

Roč. 38, č. 4 (2009), s. 366-386 ISSN 0895-5638 R&D Projects: GA MŠk LC542 Institutional research plan: CEZ:AV0Z70850503 Keywords : house prices * cointegration * panel data Subject RIV: AH - Economics Impact factor: 0.659, year: 2009

Buckling Testing and Analysis of Honeycomb Sandwich Panel Arc Segments of a Full-Scale Fairing Barrel. Part 3; 8-ply Out-of-Autoclave Facesheets

Science.gov (United States)

Pineda, Evan J.; Myers, David E.; Kosareo, Daniel N.; Kellas, Sotiris

2014-01-01

Four honeycomb sandwich panels, representing 1/16th arc segments of a 10 m diameter barrel section of the heavy lift launch vehicle, were manufactured under the NASA Composites for Exploration program and the NASA Constellation Ares V program. Two configurations were chosen for the panels: 6-ply facesheets with 1.125 in. honeycomb core and 8-ply facesheets with 1.000 in. honeycomb core. Additionally, two separate carbon fiber/epoxy material systems were chosen for the facesheets: inautoclave IM7/977-3 and out-of-autoclave T40-800B/5320-1. Smaller 3- by 5-ft panels were cut from the 1/16th barrel sections. These panels were tested under compressive loading at the NASA Langley Research Center. Furthermore, linear eigenvalue and geometrically nonlinear finite element analyses were performed to predict the compressive response of the 3- by 5-ft panels. This manuscript summarizes the experimental and analytical modeling efforts pertaining to the panel composed of 8-ply, T40-800B/5320-1 facesheets (referred to as Panel C). To improve the robustness of the geometrically nonlinear finite element model, measured surface imperfections were included in the geometry of the model. Both the linear and nonlinear, two-dimensional (2-D) and three-dimensional (3-D), models yield good qualitative and quantitative predictions. Additionally, it was predicted correctly that the panel would fail in buckling prior to failing in strength.

A comprehensive custom panel design for routine hereditary cancer testing: preserving control, improving diagnostics and revealing a complex variation landscape.

Science.gov (United States)

Castellanos, Elisabeth; Gel, Bernat; Rosas, Inma; Tornero, Eva; Santín, Sheila; Pluvinet, Raquel; Velasco, Juan; Sumoy, Lauro; Del Valle, Jesús; Perucho, Manuel; Blanco, Ignacio; Navarro, Matilde; Brunet, Joan; Pineda, Marta; Feliubadaló, Lidia; Capellá, Gabi; Lázaro, Conxi; Serra, Eduard

2017-01-04

We wanted to implement an NGS strategy to globally analyze hereditary cancer with diagnostic quality while retaining the same degree of understanding and control we had in pre-NGS strategies. To do this, we developed the I2HCP panel, a custom bait library covering 122 hereditary cancer genes. We improved bait design, tested different NGS platforms and created a clinically driven custom data analysis pipeline. The I2HCP panel was developed using a training set of hereditary colorectal cancer, hereditary breast and ovarian cancer and neurofibromatosis patients and reached an accuracy, analytical sensitivity and specificity greater than 99%, which was maintained in a validation set. I2HCP changed our diagnostic approach, involving clinicians and a genetic diagnostics team from panel design to reporting. The new strategy improved diagnostic sensitivity, solved uncertain clinical diagnoses and identified mutations in new genes. We assessed the genetic variation in the complete set of hereditary cancer genes, revealing a complex variation landscape that coexists with the disease-causing mutation. We developed, validated and implemented a custom NGS-based strategy for hereditary cancer diagnostics that improved our previous workflows. Additionally, the existence of a rich genetic variation in hereditary cancer genes favors the use of this panel to investigate their role in cancer risk.

Evaluation tests on controbloc, a programmable automaton for nuclear power plants

International Nuclear Information System (INIS)

Pralus, B.; Bourassin, J.L.; Varaldi, G.

1983-01-01

Controbloc is the programmable automaton used by Electricite de France (EDF) to equip its 1300 MW range of power plants. EDF and the designer CGEE Alsthom have conducted a large number of tests on prototype series equipment to determine whether it matches its specifications. These tests were performed in various laboratories in the Paris area and were concerned with: (1) verifying performance (acquisition, processing and retrieval cycle times - multiplexed exchange performance); (2) the robustness of equipment and its behaviour in industrial conditions (climatic tests in line with IEC regulations - earthquake resistance in particularly severe conditions - resistance to industrial interference); (3) behaviour when internal faults occur, an aspect of particular importance in view of the role played by Controbloc in nuclear power plants; in the event of a failure, safety (incorrect commands must not be given) and availability (resumption of operation) must be guaranteed. A large number of checks have been carried out both by the designer and EDF, the latter having put into operation an original method which is described in the paper. Controbloc has been thoroughly tested and its modular construction has facilitated the performance of these tests. Some shortcomings have been revealed which the designer or EDF has remedied. (author)

Five road safety education programmes for young adolescent pedestrians and cyclists: a multi-programme evaluation in a field setting.

Science.gov (United States)

Twisk, Divera A M; Vlakveld, Willem P; Commandeur, Jacques J F; Shope, Jean T; Kok, Gerjo

2014-05-01

A practical approach was developed to assess and compare the effects of five short road safety education (RSE) programmes for young adolescents that does not rely on injury or crash data but uses self reported behaviour. Questionnaires were administered just before and about one month after participation in the RSE programmes, both to youngsters who had participated in a RSE programme, the intervention group, and to a comparable reference group of youngsters who had not, the reference group. For each RSE programme, the answers to the questionnaires in the pre- and post-test were checked for internal consistency and then condensed into a single safety score using categorical principal components analysis. Next, an analysis of covariance was performed on the obtained safety scores in order to compare the post-test scores of the intervention and reference groups, corrected for their corresponding pre-test scores. It was found that three out of five RSE programmes resulted in significantly improved self-reported safety behaviour. However, the proportions of participants that changed their behaviour relative to the reference group were small, ranging from 3% to 20%. Comparisons among programme types showed cognitive approaches not to differ in effect from programmes that used fear-appeal approaches. The method used provides a useful tool to assess and compare the effects of different education programmes on self-reported behaviour. Copyright © 2014 Elsevier Ltd. All rights reserved.

Experimental programme in support of the development of the European ceramic-breeder-inside-tube test-blanket: present status and future work

International Nuclear Information System (INIS)

Proust, E.; Roux, N.; Flament, T.; Anzidei, L.; ENEA, Frascati; Casadio, S.; Dell'orco, G.

1992-01-01

Four DEMO blanket classes are under investigation within the framework of the European Test-Blanket Development Programme. One of them is featured by the use of lithium ceramic breeder pellets contained inside externally helium cooled tubes. This paper summarizes the main achievements to date of the experimental programme supporting the development of this class of blanket. It also gives an outline of the areas of the breeder material, beryllium, tritium control, and thermomechanical tests, the future work envisaged for the 92-94 period. 53 refs

Economic evaluation of occupational health and safety programmes in health care.

Science.gov (United States)

Guzman, J; Tompa, E; Koehoorn, M; de Boer, H; Macdonald, S; Alamgir, H

2015-10-01

Evidence-based resource allocation in the public health care sector requires reliable economic evaluations that are different from those needed in the commercial sector. To describe a framework for conducting economic evaluations of occupational health and safety (OHS) programmes in health care developed with sector stakeholders. To define key resources and outcomes to be considered in economic evaluations of OHS programmes and to integrate these into a comprehensive framework. Participatory action research supported by mixed qualitative and quantitative methods, including a multi-stakeholder working group, 25 key informant interviews, a 41-member Delphi panel and structured nominal group discussions. We found three resources had top priority: OHS staff time, training the workers and programme planning, promotion and evaluation. Similarly, five outcomes had top priority: number of injuries, safety climate, job satisfaction, quality of care and work days lost. The resulting framework was built around seven principles of good practice that stakeholders can use to assist them in conducting economic evaluations of OHS programmes. Use of a framework resulting from this participatory action research approach may increase the quality of economic evaluations of OHS programmes and facilitate programme comparisons for evidence-based resource allocation decisions. The principles may be applicable to other service sectors funded from general taxes and more broadly to economic evaluations of OHS programmes in general. © The Author 2015. Published by Oxford University Press on behalf of the Society of Occupational Medicine. All rights reserved. For Permissions, please email: journals.permissions@oup.com.

The MERLIN programme: Pt. 1

International Nuclear Information System (INIS)

Worswick, D.; Hindle, E.D.; Stacey, R.D.; Stevens, M.; Wickett, A.J.; GArlick, A.

1989-08-01

The MERLIN rig at the Northern Research Laboratories, Springfields, was intended to investigate the deformation behaviour of Zircaloy fuel rod cladding under conditions approximating those of a large break Loss of Coolant Accident (LOCA). In this rig, an assembly of electrically heated fuel rod simulators (6x6 cluster) was subjected to a temperature transient simulating that predicted to occur in a LOCA, including the initiation of bottom reflooding at a suitable stage. The main aim of the MERLIN programme was to investigate the extent of sub-channel blockage produced during clad deformation under conditions of high mechanical restraint, in two phase cooling conditions. The programme was to consist of four test bundles, the final two of which would be used for ballooning experiments in which high sub-channel blockage would be produced by a suitable choice of test conditions. A major part of the programme was to provide validation data for reactor accident codes used in the CEGB clad ballooning safety case for Sizewell B. This report, one of a series which describes the programme in detail, is an overview of the MERLIN programme. It provides background, summarises those reports which discuss the programme in detail and draws attention to those areas where useful information has been obtained. (author)

A note on Testing Environmental Kuznets Curves with Panel Data

NARCIS (Netherlands)

E. Dijkgraaf (Elbert); H.R.J. Vollebergh (Herman)

2003-01-01

textabstractThis paper casts doubt on empirical results based on panel estimations of an "inverted-U" relationship between per capita GDP and pollution. Using a new data set for OECD countries on carbon dioxide emissions for the period 1960-1997, we find that the crucial assumption of homogeneity

Insulation irradiation test programme for the Compact Ignition Tokamak

International Nuclear Information System (INIS)

McManamy, T.J.; Kanemoto, G.; Snook, P.

1991-01-01

In a programme to evaluate the effects of radiation exposure on the electrical insulation for the toroidal field coils of the Compact Ignition Tokamak, three types of boron-free insulation were irradiated at room temperature in the Advanced Technology Reactor (ATR) and tested at the Idaho National Engineering Laboratory. The materials were Spaulrad-S, Shikishima PG5-1 and Shikishima PG3-1. The first two use a bismaleimide resin and the third an aromatic amine hardened epoxy. Spaulrad-S is a two-dimensional (2-D) weave of S-glass, while the others are 3-D weaves of T-glass. Flexure and shear/compression samples were irradiated to ≅ 5 x 10 9 and 3 x 10 10 rad with 35-40% of the total dose from neutrons. The shear/compression samples were tested in pairs by applying an average compression of 345 MPa and then a shear load. After static tests were completed, fatigue testing was performed by cycling the shear load for up to 30000 cycles with a constant compression. The static shear strength of the samples that did not fail was then determined. Generally, shear strengths of the order of 120 MPa were measured. The behaviour of the flexure and shear/compression samples was significantly different; large reductions in the flexure strength were observed, while the shear strength stayed the same or increased slightly. The 3-D weave material demonstrated higher strength and significantly less radiation damage than the 2-D material in flexure but performed almost identically when tested with combined shear and compression. The epoxy system was much more sensitive to fatigue damage than the bismaleimide materials. No swelling was measured; however, the epoxy samples did twist slightly. (author)

Picosecond resolution programmable delay line

International Nuclear Information System (INIS)

Suchenek, Mariusz

2009-01-01

The note presents implementation of a programmable delay line for digital signals. The tested circuit has a subnanosecond delay range programmable with a resolution of picoseconds. Implementation of the circuit was based on low-cost components, easily available on the market. (technical design note)

Round robin tests of the PISC III programme on defective steam generators tubes

International Nuclear Information System (INIS)

Birac, C.; Herkenrath, H.; Crutzen, S.; Miyake, Y.; Maciga, G.

1991-11-01

The PISC III actions are intended to extend the results and methodologies of the previous PISC exercises, i.e. the assessment of the capabilities of the various examination techniques when used on real or realistic flaws in real components under real conditions of inspection. Being aware of the industrial problems that the degradation of steam generator tubes can create, the PISC III management board decided to include in the PISC III programme a special action on steam generator tubes testing (SGT). (author)

KUALITAS AKUSTIK PANEL DINDING BERBAHAN BAKU JERAMI

Directory of Open Access Journals (Sweden)

Christina E. Mediastika

2008-01-01

Full Text Available A series of study to explore possibility in using paddy-straw as main material to construct cheap and high quality panels has been developed. Prior to this study, laboratory research to examine strength of compression and tensile of the panels have been conducted, which is showed a significant value for a non-structural panel. The compression is 15 N/mm2 and tensile averaged at 0,5 N/mm2 . In this study, acoustic properties of the panels is to be examined, i.e.: transmission loss (TL, absorption coefficient (, and reverberation time (RT60. The test showed TL of 10 dB and 16 dB,  of 0,4 and 0,8 and improve RT60 from 0,88 sec to 0,35 sec and 0,16 sec (500 Hz is used for reference. Abstract in Bahasa Indonesia: Ketersediaan panel pelapis dinding yang bersifat akustik dengan harga yang lebih terjangkau seperti yang terbuat dari bahan limbah sangatlah penting. Pada penelitian awal telah diselidiki penggunaan jerami sebagai bahan baku pembuatan panel akustik, sekaligus telah dilakukan pengujian terhadap kareakteristik struktural (uji desak dan lentur dari panel tersebut. Dari uji kekuatan struktural, panel memiliki kekuatan desak mencapai 15 N/mm2 dan kuat lentur reta-rata 0,5 N/mm2. Kekuatan ini dianggap mencukupi bagi panel non-struktural yang hanya bertugas untuk memikul beban sendiri. Oleh karena tujuan awal pembuatan panel adalah untuk kepentingan akustik, maka pada penelitian lanjutan, dilakukan uji laboratorium dan lapangan untuk melihat karakterisktik akustiknya. Adapun pengujian meliputi: redaman/insulasi (TL, koefisien serap ( dan waktu dengung (RT60. Dari hasil pengujian, panel mempunyai TL 10 dB dan 16 dB,  0,4 dan 0,8, serta mampu memperbaiki RT60 ruangan dari 0,88 detik menjadi 0,35 detik dan 0,16 detik. Kesemua pengujian menggunakan band frekuensi 500 Hz sebagai acuan. Kata kunci: panel jerami, insulasi, koefisien serap, waktu dengung.

Development of assembly techniques for fire resistant aircraft interior panels

Science.gov (United States)

Lee, S. C. S.

1978-01-01

Ten NASA Type A fire resistant aircraft interior panels were fabricated and tested to develop assembly techniques. These techiques were used in the construction of a full scale lavatory test structure for flame propagation testing. The Type A panel is of sandwich construction consisting of Nomex honeycomb filled with quinone dioxime foam, and bismaleimide/glass face sheets bonded to the core with polyimide film adhesive. The materials selected and the assembly techniques developed for the lavatory test structure were designed for obtaining maximum fire containment with minimum smoke and toxic emission.

Optimum design of composite panel with photovoltaic-thermo module. Absorbing effect of cooling panel; Hikari netsu fukugo panel no saiteki sekkei. Reikyaku panel no kyunetsu koka

Energy Technology Data Exchange (ETDEWEB)

Sato, M; Kikuchi, S; Tani, T [Science University of Tokyo, Tokyo (Japan); Kadotani, K; Imaizumi, H [Komatsu Ltd., Tokyo (Japan)

1996-10-27

The composite panel with photovoltaic-thermo module becomes higher in energy-saving than the conventional air-conditioning system by the independent radiational heating and cooling effect obtained when the generating panel using a solar cell module is combined with the heating and cooling panel using a thermo-element module. The output of a solar cell module can be directly used because the solar cell module operates in AC. This paper reports the relation between the absorbed value and power consumption of the cooling panel, while paying attention to the cooling panel. The performance coefficient of the maximum absorbed value from an non-absorbing substance to a cooling panel is 2 to 3. Assume that the cooling panel during non-adiabatic operation is operated using a solar cell module of 800 W/m{sup 2} in solar intensity and 15% in conversion efficiency. The cooling-surface temperature difference is 12.12 K, and the maximum absorbed value of a non-absorbing substance to a cooling panel is 39.12 W/m{sup 2}. The absorbed value of the outer temperature to the cooling panel is 74.4 W/m{sup 2}, and each performance coefficient is 3.26 and 0.62. The absorbed value must be calculated for evaluation from the cooling-surface temperature difference measured directly from the cooling panel. 4 refs., 8 figs., 1 tab.

Experiments of cooling photovoltaic panel by desorption process; Dacchaku hanno wo riyoshita taiyoko hatsuden panel no ondo josho yokusei jikken

Energy Technology Data Exchange (ETDEWEB)

Akisawa, A; Inoue, S; Kashiwagi, T [Tokyo University of Agriculture and Technology, Tokyo (Japan)

1997-11-25

It is important to cool a photovoltaic (PV) panel, because increased panel temperature is accompanied by decreased power generation efficiency. The authors have proposed a PV power generation system combined with an adsorption chiller driven by low-temperature heat, and simulated temperature changes during the desorption cycle, where the chiller utilizes endothermic reactions of an adsorbent during the desorption cycle. Described herein are results of the tests carried out to validate possibility of controlling panel temperature increase. The system consists of the PV panel with which a bed packed with an adsorbent is monolithically combined, condenser and evaporator. It generates power during the daytime by sunbeams, and provides low-temperature heat during the nighttime by the evaporator. In particular, ice can be produced when methanol and activated coal are used as the adsorbate and adsorbent. It has an advantage of effective utilization of energy as the heat source, which has been merely dissipated by the conventional system in the air. Such a system is expected to be useful for promoting effective utilization of solar energy and for peak power shaving in summer. The initial targets are achieved by the tests. 4 refs., 10 figs.

Model of a photovoltaic panel emulator in MATLAB-Simulink

OpenAIRE

CAN, Hayrettin

2014-01-01

Being able to behave electrically similar to photovoltaic (PV) panels, PV emulator systems make it possible to perform different PV system tests under various operation conditions. In this paper, a model of a PV panel emulator is presented using the Power System Blockset under MATLAB-Simulink. The simulation of the emulator system is developed for testing a controller prior to a real-time implementation. The model can handle the dependence of all of the parameters in the model with ...

The Initial Test Programme Features for the Advanced Korean NPPs (Shin–Kori NPP Units 3&4)

International Nuclear Information System (INIS)

Sul, Y.S.

2015-01-01

Korea has developed the Advanced Power Reactor 1400 (APR1400), an evolutionary pressurised water reactor and has obtained the standard design approval in 2002. As of 2014, eight nuclear power plants (NPPs) are in preparation for operation or under construction, four in Korea (SKN 3&4, SUN 1&2) and four in UAE (BNPP 1, 2, 3&4), and four NPPs are in planning in Korea (SKN 5&6, SUN 3&4). Especially, SKN Units 3&4 are the first construction NPPs for the APR1400 and are currently in the final stage to get Operating Licence (OL). The initial test programme for NPPs begins as systems and components are turned over to the startup organization and ends with completion of the Power Ascension Tests (PATs). For SKN Unit 3, the Pre-core Hot Functional Testing has been successfully completed and the initial fuel loading would proceed after getting OL. The SKN Unit 4 is preparing for the CHT (Cold Hydrostatic Test). The SKN 3&4 has many new and advanced design features and so has developed the test programmes to demonstrate that those advanced design features can be safely operated and the performance levels can be maintained in accordance with approved safety requirements. Among those test programs, the examples of test programs, newly introduced ones compared to the previous NPPs are as follows; – SIT (Safety Injection Tank) Blowdown Test with FD (Fluidic Device) – IRWST (In-Containment Refueling Water Storage Tank) In-Plant Test – POSRV (Pilot Operated Safety Relief Valve) Test – Low Power Physics Testing and PAT considering FOAK (First Of A Kind) unit – Safe Shutdown Test with DCS (Distrubuted Control System) Fail and CMF (Common Mode Failure) for Safety Instrumentation and Control System. (author)

Aerosol Deposition and Solar Panel Performance

Science.gov (United States)

Arnott, W. P.; Rollings, A.; Taylor, S. J.; Parks, J.; Barnard, J.; Holmes, H.

2015-12-01

Passive and active solar collector farms are often located in relatively dry desert regions where cloudiness impacts are minimized. These farms may be susceptible to reduced performance due to routine or episodic aerosol deposition on collector surfaces. Intense episodes of wind blown dust deposition may negatively impact farm performance, and trigger need to clean collector surfaces. Aerosol deposition rate depends on size, morphology, and local meteorological conditions. We have developed a system for solar panel performance testing under real world conditions. Two identical 0.74 square meter solar panels are deployed, with one kept clean while the other receives various doses of aerosol deposition or other treatments. A variable load is used with automation to record solar panel maximum output power every 10 minutes. A collocated sonic anemometer measures wind at 10 Hz, allowing for both steady and turbulent characterization to establish a link between wind patterns and particle distribution on the cells. Multispectral photoacoustic instruments measure aerosol light scattering and absorption. An MFRSR quantifies incoming solar radiation. Solar panel albedo is measured along with the transmission spectra of particles collected on the panel surface. Key questions are: At what concentration does aerosol deposition become a problem for solar panel performance? What are the meteorological conditions that most strongly favor aerosol deposition, and are these predictable from current models? Is it feasible to use the outflow from an unmanned aerial vehicle hovering over solar panels to adequately clean their surface? Does aerosol deposition from episodes of nearby forest fires impact performance? The outlook of this research is to build a model that describes environmental effects on solar panel performance. Measurements from summer and fall 2015 will be presented along with insights gleaned from them.

Contralateral prophylactic mastectomy rate and predictive factors among patients with breast cancer who underwent multigene panel testing for hereditary cancer.

Science.gov (United States)

Elsayegh, Nisreen; Webster, Rachel D; Gutierrez Barrera, Angelica M; Lin, Heather; Kuerer, Henry M; Litton, Jennifer K; Bedrosian, Isabelle; Arun, Banu K

2018-05-07

Although multigene panel testing is increasingly common in patients with cancer, the relationship between its use among breast cancer patients with non-BRCA mutations or variants of uncertain significance (VUS) and disease management decisions has not been well described. This study evaluated the rate and predictive factors of CPM patients who underwent multigene panel testing. Three hundred and fourteen patients with breast cancer who underwent multigene panel testing between 2014 and 2017 were included in the analysis. Of the 314 patients, 70 elected CPM. Election of CPM by gene status was as follows: BRCA carriers (42.3%), non-BRCA carriers (30.1%), and VUS (10.6%). CPM election rates did not differ between non-BRCA carriers and BRCA carriers (P = 0.6205). Among non-BRCA carriers, negative hormone receptor status was associated with CPM (P = 0.0115). For those with a VUS, hormone receptor status was not associated with CPM (P = 0.1879). Although the rate of CPM between BRCA carriers and non-BRCA carriers was not significantly different, the predictors of CPM were different in each group. Our analyses shed the light on the increasing use of CPM among patients who are non-BRCA carriers as well those with a VUS. Our study elucidates the differing predictive factors of CPM election among BRCA carriers, non-BRCA carries, and those with a VUS. Our findings reveal the need for providers to be cognizant that non-BRCA genes and VUS drive women to elect CPM despite the lack of data for contralateral breast cancer risk associated with these genes. © 2018 The Authors. Cancer Medicine published by John Wiley & Sons Ltd.

Testing Environmental Kuznets Curve in the Selected Transition Economies with Panel Smooth Transition Regression Analysis

Directory of Open Access Journals (Sweden)

Mahmut Zortuk

2016-08-01

Full Text Available The Environmental Kuznets Curve (EKC introduces an inverted U-shaped relationship between environmental pollution and economic development. The inverted U-shaped curve is seen as complete pattern for developed economies. However, our study tests the EKC for developing transition economies of European Union, therefore, our results could make a significant contribution to the literature. In this paper, the relationship between carbon dioxide (CO2 emissions, gross domestic product (GDP, energy use and urban population is investigated in the Transition Economies (Bulgaria, Croatia, Czech Republic, Estonia, Hungary, Latvia, Lithuania, Poland, Romania, Slovakia and Slovenia. Environmental Kuznets Curve is tested by panel smooth transition regression for these economies for 1993 – 2010 periods. As a result of study, the null hypothesis of linearity was rejected and no-remaining nonlinearity test showed that there is a smooth transition exists between two regimes (below $5176 GDP per capita is first one and above $5176 GDP per capita is second one in the related period for these economies.

Electrostatic Discharge Testing of Carbon Composite Solar Array Panels for Use in the Jovian Environment

Science.gov (United States)

Green, Nelson W.; Dawson, Stephen F.

2015-01-01

NASA is currently considering a mission to investigate the moons of Jupiter. When designing a spacecraft for this type of mission, there are a number of engineering challenges, especially if the mission chooses to utilize solar arrays to provide the spacecraft power. In order for solar arrays to be feasible for the mission, their total mass needed to fit within the total budget for the mission, which strongly suggested the use of carbon composite facesheets on an aluminum core for the panel structure. While these composite structures are a good functional substitution for the metallic materials they replace, they present unique challenges when interacting with the harsh Jovian space environment. As a composite material, they are composed of more than one material and can show different base properties depending in differing conditions. Looking at the electrical properties, in an Earth-based environment the carbon component of the composite dominates the response of the material to external stimulus. Under these conditions, the structures strongly resembles a conductor. In the Jovian environment, with temperatures reaching 50K and under the bombardment from energetic electrons, the non-conducting pre-preg binding materials may come to the forefront and change the perceived response. Before selecting solar arrays as the baseline power source for a mission to Jupiter, the response of the carbon composites to energetic electrons while held at cryogenic temperatures needed to be determined. A series of tests were devised to exam the response of a sample solar array panel composed of an M55J carbon weave layup with an RS-3 pre-preg binder. Test coupons were fabricated and exposed to electrons ranging from 10 keV to 100 keV, at 1 nA/cm2, while being held at cryogenic temperatures. While under electron bombardment, electrical discharges were observed and recorded with the majority of discharges occurring with electron energies of 25 keV. A decrease in temperature to liquid

Effect of Brazil's conditional cash transfer programme on tuberculosis incidence.

Science.gov (United States)

Nery, J S; Rodrigues, L C; Rasella, D; Aquino, R; Barreira, D; Torrens, A W; Boccia, D; Penna, G O; Penna, M L F; Barreto, M L; Pereira, S M

2017-07-01

To evaluate the impact of the Brazilian cash transfer programme (Bolsa Família Programme, BFP) on tuberculosis (TB) incidence in Brazil from 2004 to 2012. We studied tuberculosis surveillance data using a combination of an ecological multiple-group and time-trend design covering 2458 Brazilian municipalities. The main independent variable was BFP coverage and the outcome was the TB incidence rate. All study variables were obtained from national databases. We used fixed-effects negative binomial models for panel data adjusted for selected covariates and a variable representing time. After controlling for covariates, TB incidence rates were significantly reduced in municipalities with high BFP coverage compared with those with low and intermediate coverage (in a model with a time variable incidence rate ratio = 0.96, 95%CI 0.93-0.99). This was the first evidence of a statistically significant association between the increase in cash transfer programme coverage and a reduction in TB incidence rate. Our findings provide support for social protection interventions for tackling TB worldwide.

A panel of 74 AISNPs: Improved ancestry inference within Eastern Asia.

Science.gov (United States)

Li, Cai-Xia; Pakstis, Andrew J; Jiang, Li; Wei, Yi-Liang; Sun, Qi-Fan; Wu, Hong; Bulbul, Ozlem; Wang, Ping; Kang, Long-Li; Kidd, Judith R; Kidd, Kenneth K

2016-07-01

Many ancestry informative SNP (AISNP) panels have been published. Ancestry resolution in them varies from three to eight continental clusters of populations depending on the panel used. However, none of these panels differentiates well among East Asian populations. To meet this need, we have developed a 74 AISNP panel after analyzing a much larger number of SNPs for Fst and allele frequency differences between two geographically close population groups within East Asia. The 74 AISNP panel can now distinguish at least 10 biogeographic groups of populations globally: Sub-Saharan Africa, North Africa, Europe, Southwest Asia, South Asia, North Asia, East Asia, Southeast Asia, Pacific and Americas. Compared with our previous 55-AISNP panel, Southeast Asia and North Asia are two newly assignable clusters. For individual ancestry assignment, the likelihood ratio and ancestry components were analyzed on a different set of 500 test individuals from 11 populations. All individuals from five of the test populations - Yoruba (YRI), European (CEU), Han Chinese in Henan (CHNH), Rondonian Surui (SUR) and Ticuna (TIC) - were assigned to their appropriate geographical regions unambiguously. For the other test populations, most of the individuals were assigned to their self-identified geographical regions with a certain degree of overlap with adjacent populations. These alternative ancestry components for each individual thus help give a clearer picture of the possible group origins of the individual. We have demonstrated that the new AISNP panel can achieve a deeper resolution of global ancestry. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.

GaAs/Ge solar panels for the SAMPEX program

Science.gov (United States)

Dobson, Rodney; Kukulka, Jerry; Dakermanji, George; Roufberg, Lew; Ahmad, Anisa; Lyons, John

1992-01-01

GaAs based solar cells have been developed for spacecraft use for several years. However, acceptance and application of these cells for spacecraft missions has been slow because of their high cost and concerns about their integration onto solar panels. Spectrolab has now completed fabrication of solar panels with GaAs/Ge solar cells for a second space program. This paper will focus on the design, fabrication and test of GaAs/Ge solar panels for the Solar Anomalous and Magnetospheric Particle Explorer (SAMPEX) Program.

Ballistic study of Tensylon®–based panels

Directory of Open Access Journals (Sweden)

L-C. Alil

2018-06-01

Full Text Available Ballistic protection is a matter of interest requested by civilian as well as military needs. The last decade has witnessed an increase in the use of light weight and efficient armour systems. These panels may be used for body protection as well as light vehicle protection against small calibres or to enhance the protection level of heavier vehicles with decreasing or maintaining their weight penalty. Ultra high molecular weight polyethylene is a material of interest for light weight armour applications. The authors designed panels made of hot–pressed Tensylon® in different configurations with thin steel sheets as a backing and shield protection. Comparison of their ballistic performance to the theory predictions reveals the improved ballistic response of the panels. In addition, a non–pressed Tensylon® panel has been tested in order to facilitate the observations of the failure mechanisms inside the panels. Even if not suitable for practical use, such non–pressed panels clearly reveal the dynamic processes at micro–scale that occur during the impact. The failure mechanisms of the material under bullet penetration are discussed based on photography, optical microscopy and scanning electron microscopy. The supposed effects of the panel pressing are discussed based on the observed difference between pressed and non–pressed structures ballistic response.

Evaluation of the high-temperature materials programme of the Joint Research Centre (1980-85)

International Nuclear Information System (INIS)

Glenny, R.J.E.; Boehm, H.; Gellings, P.J.; Gobin, P.; Lanzavecchia, G.; Nicholaides, C.

1986-01-01

This report covers the findings of the external panel of experts set up to evaluate the results of the Community's programme in the field of high-temperature materials (1980-85), carried out at the Petten establishment of the Joint Research Centre. The evaluation covers the quality and relevance of the research, the usefulness of the results and the role played by the JRC in this field at the European level. The report describes and gives comments on the content, structure and management of the five projects constituting the current programme, outlines the methods and procedures used during the evaluation and gives a number of recommendations pertinent to future activities

Buckling localization in a cylindrical panel under axial compression

DEFF Research Database (Denmark)

Tvergaard, Viggo; Needleman, A.

2000-01-01

Localization of an initially periodic buckling pattern is investigated for an axially compressed elastic-plastic cylindrical panel of the type occurring between axial stiffeners on cylindrical shells. The phenomenon of buckling localization and its analogy with plastic flow localization in tensile...... test specimens is discussed in general. For the cylindrical panel, it is shown that buckling localization develops shortly after a maximum load has been attained, and this occurs for a purely elastic panel as well as for elastic-plastic panels. In a case where localization occurs after a load maximum......, but where subsequently the load starts to increase again, it is found that near the local load minimum, the buckling pattern switches back to a periodic type of pattern. The inelastic material behavior of the panel is described in terms of J(2) corner theory, which avoids the sometimes unrealistically high...

Stressed skin panels

Energy Technology Data Exchange (ETDEWEB)

Anon

2001-07-01

Advantages and disadvantages of stressed skin panels, also known as structural insulated panels (SIPs), are discussed as material and labour-saving alternatives to traditional stick framing. Stressed skin panels are manufactured 'sandwich' assemblies with a rigid insulating polystyrene foam core, whose interior and exterior surfaces are bonded into panels. The skins distribute and carry the structural loading while the bonded foam core provides insulation and keeps the two skins aligned. Since there are fewer framing members, there is little thermal bridging and the R-value remains high. SIPs are usually manufactured in four feet by eight feet panels, although some manufacturers can produce panels up to eight feet by forty feet. SIPs are resource efficient as they use less wood than conventional framing (about 25 per cent less); can structurally cover large spans, requiring less supplementary framing. Use of SIPs eliminate the need for headers over small openings; provide the ability to nail anywhere; create less scrap and waste; lessen vulnerability to unfavourable weather and other job-site hazards, can reduce delays, and often can produce significant savings in material and labour costs. Limitations include the more complex approaches to plumbing and electrical systems, although this can be minimized by designers by incorporating much of the plumbing and electrical work on interior (non-panel) walls. Most stressed skin panels require one-half inch interior gypsum drywall. If become wet, stressed skin panels take a long time to dry out and may harbour mold growth. Larger stressed-skin panels used in floors and roofs, may require cranes or other machinery for handling because of their weight. Although not without some environmental impact, overall, stressed skin panels are judged to be a resource-efficient building technology with significant energy-efficiency benefits and distinct advantages over stick framing. 3 photos.

Damage assessment of compression loaded debond damaged sandwich panels

DEFF Research Database (Denmark)

Moslemian, Ramin; Berggreen, Christian; Quispitupa, Amilcar

2010-01-01

with an implanted circular face/core debond. Compression tests were conducted on intact sandwich panels and panels with an implanted circular face/core debond with three different types of foam core materials (PVC H130, PVC H250 and PMI 51-IG). The strains and out-of-plane displacements of the debonded region were...

Two-step rating-based 'double-faced applicability' test for sensory analysis of spread products as an alternative to descriptive analysis with trained panel.

Science.gov (United States)

Kim, In-Ah; den-Hollander, Elyn; Lee, Hye-Seong

2018-03-01

Descriptive analysis with a trained sensory panel has thus far been the most well defined methodology to characterize various products. However, in practical terms, intensive training in descriptive analysis has been recognized as a serious defect. To overcome this limitation, various novel rapid sensory profiling methodologies have been suggested in the literature. Among these, attribute-based methodologies such as check-all-that-apply (CATA) questions showed results comparable to those of conventional sensory descriptive analysis. Kim, Hopkinson, van Hout, and Lee (2017a, 2017b) have proposed a novel attribute-based methodology termed the two-step rating-based 'double-faced applicability' test with a novel output measure of applicability magnitude (d' A ) for measuring consumers' product usage experience throughout various product usage stages. In this paper, the potential of the two-step rating-based 'double-faced applicability' test with d' A was investigated as an alternative to conventional sensory descriptive analysis in terms of sensory characterization and product discrimination. Twelve commercial spread products were evaluated using both conventional sensory descriptive analysis with a trained sensory panel and two-step rating-based 'double-faced applicability' test with an untrained sensory panel. The results demonstrated that the 'double-faced applicability' test can be used to provide a direct measure of the applicability magnitude of sensory attributes of the samples tested in terms of d' A for sensory characterization of individual samples and multiple sample comparisons. This suggests that when the appropriate list of attributes to be used in the questionnaire is already available, the two-step rating-based 'double-faced applicability' test with d' A can be used as a more efficient alternative to conventional descriptive analysis, without requiring any intensive training process. Copyright © 2017 Elsevier Ltd. All rights reserved.

Automatic outdoor monitoring system for photovoltaic panels.

Science.gov (United States)

Stefancich, Marco; Simpson, Lin; Chiesa, Matteo

2016-05-01

Long-term acquisition of solar panel performance parameters, for panels operated at maximum power point in their real environment, is of critical importance in the photovoltaic research sector. However, few options exist for the characterization of non-standard panels such as concentrated photovoltaic systems, heavily soiled or shaded panels or those operating under non-standard spectral illumination; certainly, it is difficult to find such a measurement system that is flexible and affordable enough to be adopted by the smaller research institutes or universities. We present here an instrument aiming to fill this gap, autonomously tracking and maintaining any solar panel at maximum power point while continuously monitoring its operational parameters and dissipating the produced energy without connection to the power grid. The instrument allows periodic acquisition of current-voltage curves to verify the employed maximum power point tracking approach. At the same time, with hardware schematics and software code being provided, it provides a flexible open development environment for the monitoring of non-standard generators like concentrator photovoltaic systems and to test novel power tracking approaches. The key issues, and the corresponding solutions, encountered in the design are analyzed in detail and the relevant schematics presented.

Automatic outdoor monitoring system for photovoltaic panels

Energy Technology Data Exchange (ETDEWEB)

Stefancich, Marco [Consiglio Nazionale delle Ricerce, Istituto dei Materiali per l’Elettronica ed il Magnetismo (CNR-IMEM), Parco Area delle Scienze 37/A, 43124 Parma, Italy; Simpson, Lin [National Renewable Energy Laboratory, 15013 Denver West Parkway, Golden, Colorado 80401, USA; Chiesa, Matteo [Masdar Institute of Science and Technology, P.O. Box 54224, Masdar City, Abu Dhabi, United Arab Emirates

2016-05-01

Long-term acquisition of solar panel performance parameters, for panels operated at maximum power point in their real environment, is of critical importance in the photovoltaic research sector. However, few options exist for the characterization of non-standard panels such as concentrated photovoltaic systems, heavily soiled or shaded panels or those operating under non-standard spectral illumination; certainly, it is difficult to find such a measurement system that is flexible and affordable enough to be adopted by the smaller research institutes or universities. We present here an instrument aiming to fill this gap, autonomously tracking and maintaining any solar panel at maximum power point while continuously monitoring its operational parameters and dissipating the produced energy without connection to the power grid. The instrument allows periodic acquisition of current-voltage curves to verify the employed maximum power point tracking approach. At the same time, with hardware schematics and software code being provided, it provides a flexible open development environment for the monitoring of non-standard generators like concentrator photovoltaic systems and to test novel power tracking approaches. The key issues, and the corresponding solutions, encountered in the design are analyzed in detail and the relevant schematics presented.

Analysis of copper alloy to stainless steel bonded panels for ITER first wall applications

International Nuclear Information System (INIS)

Stubbins, J.F.; Kurath, P.; Drockelman, D.; Li, G.; Thomas, B.G.; Morgan, G.D.; McAfee, J.

1995-01-01

The mechanical performance of bi-layer copper alloy (Gildcop CuA115) to 316L stainless steel panels was examined. This work was to analyze potential bonding methodologies for the fabrication of ITER first wall structures, to verify the bond integrity of the fabricated panels, and to establish some mechanical performance parameters for panel structural performance. Two bonding routes were examined: explosively bonding and hot isostatically pressed (HIP) bonding. Following fabrication, the panels were mechanically loaded in tensile and fatigue tests. The mechanical performance test verified that the bond integrity was excellent, and that the primary mode of failure of the bonded panels was related to failure in the base materials rather than lack of adequate bond strength

Experimental and numerical results from hybrid retrofitted photovoltaic panels

International Nuclear Information System (INIS)

Rossi, Cecilia; Tagliafico, Luca A.; Scarpa, Federico; Bianco, Vincenzo

2013-01-01

Highlights: • The experimental study focuses on the feasibility of hybrid PV/T panels retrofitting. • The critical role of a thin layer of air between PV panel and back plate is evidenced. • The benefit of the addition of a conductive paste layer is analyzed via FEM simulations. • The use of wood ribs to stick the back plate represents a cheap effective solution. - Abstract: The aim of present study is to investigate different methodologies to achieve a better contact between a photovoltaic panel and a thermal plate, in order to cool the PV panel by means of water in the perspective of coupling it with a heat pump. It is believed that this kind of system allows to obtain a higher energy efficiency. The analysis is developed both experimentally and numerically, testing different kinds of configurations in different operating conditions. Simulations are employed to analyze the effect of the variations of the contact resistance between the panel and the thermal plates, demonstrating that the use of a conductive paste increases the overall performance of the panel. Results show interesting possibilities in terms of retrofitting of existing photovoltaic panels by employing very simple solutions, such as to fix the thermal plate on the rear of the panel by means of wood ribs

Implementation of a reference standard and proficiency testing programme by the World Wide Antimalarial Resistance Network (WWARN

Directory of Open Access Journals (Sweden)

Barnes Karen I

2010-12-01

Full Text Available Abstract Background The Worldwide Antimalarial Resistance Network (WWARN is a global collaboration to support the objective that anyone affected by malaria receives effective and safe drug treatment. The Pharmacology module aims to inform optimal anti-malarial drug selection. There is an urgent need to define the drug exposure - effect relationship for most anti-malarial drugs. Few anti-malarials have had their therapeutic blood concentration levels defined. One of the main challenges in assessing safety and efficacy data in relation to drug concentrations is the comparability of data generated from different laboratories. To explain differences in anti-malarial pharmacokinetics in studies with different measurement laboratories it is necessary to confirm the accuracy of the assay methods. This requires the establishment of an external quality assurance process to assure results that can be compared. This paper describes this process. Methods The pharmacology module of WWARN has established a quality assurance/quality control (QA/QC programme consisting of two separate components: 1. A proficiency testing programme where blank human plasma spiked with certified reference material (CRM in different concentrations is sent out to participating bioanalytical laboratories. 2. A certified reference standard programme where accurately weighed amounts of certified anti-malarial reference standards, metabolites, and internal standards are sent to participating bioanalytical and in vitro laboratories. Conclusion The proficiency testing programme is designed as a cooperative effort to help participating laboratories assess their ability to carry out drug analysis, resolve any potential problem areas and to improve their results - and, in so doing, to improve the quality of anti-malarial pharmacokinetic data published and shared with WWARN. By utilizing the same source of standards for all laboratories, it is possible to minimize bias arising from poor

Fracture Behaviours in Compression-loaded Triangular Corrugated Core Sandwich Panels

Directory of Open Access Journals (Sweden)

Zaid N.Z.M.

2016-01-01

Full Text Available The failure modes occurring in sandwich panels based on the corrugations of aluminium alloy, carbon fibre-reinforced plastic (CFRP and glass fibre-reinforced plastic (GFRP are analysed in this work. The fracture behaviour of these sandwich panels under compressive stresses is determined through a series of uniform lateral compression performed on samples with different cell wall thicknesses. Compression test on the corrugated-core sandwich panels were conducted using an Instron series 4505 testing machine. The post-failure examinations of the corrugated-core in different cell wall thickness were conducted using optical microscope. Load-displacement graphs of aluminium alloy, GFRP and CFRP specimens were plotted to show progressive damage development with five unit cells. Four modes of failure were described in the results: buckling, hinges, delamination and debonding. Each of these failure modes may dominate under different cell wall thickness or loading condition, and they may act in combination. The results indicate that thicker composites corrugated-core panels tend can recover more stress and retain more stiffness. This analysis provides a valuable insight into the mechanical behaviour of corrugated-core sandwich panels for use in lightweight engineering applications.

TEST performance of a myositis panel in a clinical immunology laboratory in New South Wales, Australia.

Science.gov (United States)

Tan, Teck Choon; Wienholt, Louise; Adelstein, Stephen

2016-10-01

There is increasing recognition of a clinico-serological correlation between the idiopathic inflammatory myopathies and myositis-specific autoantibodies (MSA). We review the use of a line immunoassay-based myositis panel incorporating both MSA and myositis-associated autoantibodies (MAA) in a selected population of patients. A retrospective analysis of patients with myositis panel assays performed in 2013 were reviewed and compared against clinical diagnoses. A total of 96 patient samples were evaluated, the clinical indications include 60 patients with suspected idiopathic inflammatory myositis (IIM), 24 patients with suspected interstitial lung disease (ILD) and 12 patients with suspected systemic autoimmune disease (SAD). In the myositis group, there were 21 patients diagnosed with IIM and 18 patients diagnosed with IIM had a positive myositis panel. Of the 39 patients without IIM, nine of these patients had a positive myositis panel. In the ILD group, 10 of 24 patients had a positive myositis panel; of these, two were diagnosed anti-synthetase syndrome (ASS) and five patients with ILD. In the suspected SAD group, three had positive myositis panel and all did not appear associated with their final diagnoses. In patients with a clinical diagnosis of IIM or ILD-associated SAD, four patients with anti-PL-12 were detected, three patients with anti-signal recognition protein, two patients with anti-Jo-1, and two patients with anti-Mi2. The myositis panel is an objective investigative modality with a sensitivity of 80.00% and a specificity of 75.76% in a setting of high pretest clinical suspicion. © 2015 Asia Pacific League of Associations for Rheumatology and Wiley Publishing Asia Pty Ltd.

Increasing photovoltaic panel power through water cooling technique

Directory of Open Access Journals (Sweden)

Calebe Abrenhosa Matias

2017-02-01

Full Text Available This paper presents the development of a cooling apparatus using water in a commercial photovoltaic panel in order to analyze the increased efficiency through decreased operating temperature. The system enables the application of reuse water flow, at ambient temperature, on the front surface of PV panel and is composed of an inclined plane support, a perforated aluminum profile and a water gutter. A luminaire was specially developed to simulate the solar radiation over the module under test in a closed room, free from the influence of external climatic conditions, to carry out the repetition of the experiment in controlled situations. The panel was submitted to different rates of water flow. The best water flow rate was of 0.6 L/min and net energy of 77.41Wh. Gain of 22.69% compared to the panel without the cooling system.

The study of fix composite panel and steel plates on testing stand

Science.gov (United States)

Wróbel, A.; Płaczek, M.; Wachna, M.

2016-08-01

In this paper the practical possibilities of strength verification analysis of composite materials used in the manufacture of selected components of railway wagons are presented. Real laboratory stand for measurements in a scale controlled by PLC controller were made. The study of different types of connections of composite materials with sheet metal is presented. In one of the chapter of this paper principles construction of testing stand with pneumatic cylinder were presented. Mainly checking of displacements and stresses generated on the sheet as a result of pneumatic actuators load for composite boards was carried out. The use of the controller with operating panel allows to easy programming testing cycle. The user can define the force generated by the actuator by change of air pressure in cylinder. Additionally the location of acting cylinders and their jump can be changed by operator. The examination of the volume displacements was done by displacement sensor, and the tensile strain gauge. All parameters are written in CatmanEasy - data acquisition software. This article presents the study of stresses and displacements in the composite plates joined with sheet metal, in summary of this article, the authors compare the obtained results with the computer simulation results in the article: "Simulation of stresses in an innovative combination of composite with sheet".

Environmental Assessment of R&D Programmes

DEFF Research Database (Denmark)

Lyhne, Ivar; Byriel, Inger Pihl

2013-01-01

cause severe negative environmental impacts. This paper presents an innovative environmental assessment practice on R&D programmes in Denmark. It reports on the challenges and experiences of assessing the Danish R&D programme ForskEL, which promotes R&D projects within the electricity sector......Despite their important role in shaping the technologies of the future, public research and development (R&D) programmes are rarely based on systematic assessments of the environmental effects. R&D programmes thus allocate a huge amount of financial resources to projects, which potentially may....... The programme is characterised by uncertainty about impacts and incomparable project types and technologies. A methodology for dealing with these challenges is presented, and experiences from a testing of the methodology on the 2012 programme are reflected upon. Finally the assessment is discussed in terms...

Central auditory processing disorder (CAPD tests in a school-age hearing screening programme – analysis of 76,429 children

Directory of Open Access Journals (Sweden)

Piotr H. Skarzynski

2015-02-01

Full Text Available [b]Introduction and objective[/b]. Hearing disorders among school-age children are a current concern. Continuing studies have been performed in Poland since 2008, and on 2 December 2011 the EU Council adopted Conclusions on the Early Detection and Treatment of Communication Disorders in Children, Including the Use of e-Health Tools and innovative Solutions. The discussion now focuses not only on the efficacy of hearing screening programmes in schoolchildren, but what should be its general aim and what tests it should include? This paper makes the case that it is important to include central auditory processing disorder (CAPD tests. One such test is the dichotic digits test (DDT. The aim of the presented study was to evaluate the usefulness of the DDT in detecting central hearing disorders in school-age children. [b]Materials and methods[/b]. During hearing screening programmes conducted in Poland in 2008–2010, exactly 235,664 children (7–12-years-old were screened in 9,325 schools. Of this number, 7,642 were examined using the DDT test for CAPD. Screening programmes were conducted using the Sense Examination Platform. [b]Results.[/b] With the cut-off criterion set at the 5th percentile, results for the DDT applied in a divided attention mode were 11.4% positive for 7-year-olds and 11.3% for 12-year-olds. In the focused attention mode, the comparable result for 12-year-olds was 9.7%. There was a clear right ear advantage. In children with positive DDT results, a higher incidence of other disorders, such as dyslexia, was observed. [b]Conclusions[/b]. A test for CAPD should be included in the hearing screening of school-age children. The results of this study form the basis for developing Polish standards in this area.

Noise Reduction in Double‿Panel Structures by Cavity and Panel Resonance Control

NARCIS (Netherlands)

Ho, J.; Berkhoff, Arthur P.

2011-01-01

This paper presents an investigation of the cavity and the panel resonance control in a double‿panel structure. The double‿panel structure, which consists of two panels with air in the gap, is widely adopted in many applications such as aerospace due to its light weight and effective

Noise reduction in double-panel structures by cavity and panel resonance control

NARCIS (Netherlands)

Ho, J.-H.; Berkhoff, A.P

2011-01-01

This paper presents an investigation of the cavity and the panel resonance control in a double‐panel structure. The double‐panel structure, which consists of two panels with air in the gap, is widely adopted in many applications such as aerospace due to its light weight and effective

Standardised method for reporting exercise programmes: protocol for a modified Delphi study.

Science.gov (United States)

Slade, Susan C; Dionne, Clermont E; Underwood, Martin; Buchbinder, Rachelle

2014-12-30

Exercise is integral to health across the lifespan and important for people with chronic health conditions. A systematic review of exercise trials for chronic conditions reported suboptimal descriptions of the evaluated interventions and concluded that this hinders interpretation and replication. The aim of this project is to develop a standardised method for reporting essential exercise programme details being evaluated in clinical trials. A modified Delphi technique will be used to gain consensus among international exercise experts. We will use three sequential rounds of anonymous online questionnaires to refine a standardised checklist. A draft checklist of potentially relevant items was developed based on the results of a systematic review of exercise systematic reviews. An international panel of experts was identified by exercise systematic review authorship, established international profile in exercise research and practice and by peer referral. In round 1, the international panel of experts will be asked to rate the importance of each draft item and provide additional suggestions for revisions or new items. Consensus will be considered reached if at least 70% of the panel strongly agree/disagree that an item should be included or excluded. Where agreement is not reached or there are suggestions for altered or new items, these will be taken to round 2 together with an aggregated summary of round 1 responses. Following the second round, a ranking of item importance will be made to rationalise the number of items. The final template will be distributed to panel members for approval. Ethics approval was received from The Cabrini Institute Ethics Committee, Melbourne, Australia (HREC 02-07-04-14). We plan to use a stepwise process to develop and refine a standardised and internationally agreed template for explicit reporting of exercise programmes. The template will be generalisable across all types of exercise interventions. The findings will be disseminated

The Relationship between Financial Freedom, Financial Depth and Mutual Funds: Panel Bounds Testing Approach

Directory of Open Access Journals (Sweden)

Gönül YÜCE

2013-03-01

Full Text Available The purpose of this study is to investigate the nexus between mutual fund assets, financial freedom, and financial depth in 54 countries from 2000 to 2011 by employing panel ARDL bounds testing approach. To examine this linkage, we use the two-step procedure from ARDL bounds testing model: In first step, we explore the long-term relationship between the variables by using ARDL test of cointegration. Secondly, we employ a dynamic error correction model to explore the short-term relationship between the variables. All results suggest that there is a positive and statistically significant evidence between central bank independence, financial freedom, and economic growth in both long and short-term. Besides, long-term empirical results refer that current period central bank independence and financial freedom are the important factors for determining the national output level. In addition, the results of the short-term dynamics are parallel with the long-term estimation results. Furthermore, because the error correction term is found negative and statistically significant, it can be said that the variables converge to equilibrium quickly, and short-term imbalances will be overcomed in the long-term.

Evaluation of seven rapid tests for syphilis available in Brazil using defibrinated plasma panels.

Science.gov (United States)

Bazzo, Maria Luiza; da Motta, Leonardo Rapone; Rudolf-Oliveira, Renata Cristina Messores; Bigolin, Alisson; Golfetto, Lisléia; Mesquita, Fábio; Benzaken, Adele Schwartz; Gaspar, Pamela Cristina; Pires, Ana Flavia Nacif P Coelho; Ferreira Júnior, Orlando da Costa; Franchini, Miriam

2017-12-01

In 2012, the WHO estimated that 6 million new cases of syphilis per year would occur worldwide, including 937 000 in Brazil. Early diagnosis and treatment of syphilis are essential to reduce morbidity and prevent transmission. The availability of rapid tests (RTs) for this diagnosis means that testing can be performed more quickly, as a point-of-care test, even in non-laboratory environments and requires only simple technical training to antibodies detection. The objective of this study was to evaluate the performance and operational aspects of seven commercially available RTs for syphilis in Brazil. Seven rapid treponemal tests were evaluated for sensitivity, specificity, accuracy and Kappa value, according to a panel composed of 493 members. The operational performance of the assay was also determined for these tests. The seven RTs showed sensitivity ranging from 94.5% to 100% when compared with the reference tests and specificity of between 91.5% and 100%. All the RTs evaluated presented good operational performance, and only one failed to present the minimum specificity as defined by Brazil's Ministry of Health. All the tests presented good operational performance, and the professionals who performed them considered them to be easy to use and interpret. This evaluation is important for making informed choices of tests to be used in the Brazilian Unified Health System. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2017. All rights reserved. No commercial use is permitted unless otherwise expressly granted.

Preliminary evaluation of the impact of a Web-based HIV testing programme in Abruzzo Region on the prevention of late HIV presentation and associated mortality.

Science.gov (United States)

Polilli, Ennio; Sozio, Federica; Di Stefano, Paola; Clerico, Luigi; Di Iorio, Giancarlo; Parruti, Giustino

2018-04-01

This study aimed to analyze the efficacy of a Web-based testing programme in terms of the prevention of late HIV presentation. The clinical characteristics of patients diagnosed with HIV via the Web-based testing programme were compared to those of patients diagnosed in parallel via standard diagnostic care procedures. This study included the clinical and demographic data of newly diagnosed HIV patients enrolled at the study clinic between February 2014 and June 2017. These patients were diagnosed either via standard diagnostic procedures or as a result of the Web-based testing programme. Eighty-eight new cases of HIV were consecutively enrolled; their mean age was 39.1±13.0 years. Fifty-nine patients (67%) were diagnosed through standard diagnostic procedures and 29 (33%) patients came from the Web-based testing programme. Late presentation (62% vs. 34%, p=0.01) and AIDS-defining conditions at presentation (13 vs. 1, p=0.02) were significantly more frequent in the standard care group than in the Web-based group; four of 13 patients with AIDS diagnosed under standard diagnostic procedures died, versus none in the Web-based testing group (pWeb-based recruitment for voluntary and free HIV testing helped to diagnose patients with less advanced HIV disease and no risk of death, from all at-risk groups, in comparison with standard care testing. Copyright © 2018 The Authors. Published by Elsevier Ltd.. All rights reserved.

Noise Reduction in Double‿Panel Structures by Cavity and Panel Resonance Control

OpenAIRE

Ho, J.; Berkhoff, Arthur P.

2011-01-01

This paper presents an investigation of the cavity and the panel resonance control in a double‿panel structure. The double‿panel structure, which consists of two panels with air in the gap, is widely adopted in many applications such as aerospace due to its light weight and effective transmission‿loss at high frequency. However, the resonance of the cavity and the poor transmission‿loss at low frequency limit its noise control performance. Applying active control forces on the panels or utili...

Assessment of biofouling community development on test panels submerged in Kudankulam coast with special reference to the Nuclear Power Project

International Nuclear Information System (INIS)

Satheesh, S.; Wesley, S. Godwin

2008-01-01

Biofouling is known to be one of the common problems in cooling water systems of power plants and several incidents of plant shutdown have been reported from various parts of the world. The settlement of marine organisms on an exposed hard surface depends obviously on the species, which are naturally present at a given site as well as their ability to attach and grow on that surface. Information on the organisms forming the fouling complex is necessary in view of the damages they cause to various marine structures and for devising protective measures. The present paper reports the results of the investigations of biofouling carried out for a period of two years from November 2003 to October 2004 at Kudankulam coast where a mega nuclear power project is under construction. Wooden test panels (10x10x3 cm) were fitted to a raft and submerged in the coastal waters. Total fouling biomass, thickness, coverage and community composition were analysed from the panels. Barnacles, mussels, ascidians, polychaetes, amphipods and seaweeds were the common fouling groups settled on the test panels. The total biomass reached to a maximum of 69.9 g.dm -2 (dry weight) after 330 days of exposure. The fouling thickness reached a maximum of 42.3 mm after 225 days of exposure. Results also showed a strong temporal variation in the fouling community recruitment. Based on the observations, Kudankulam coast could be categorized as a moderate fouling station mainly due to the low abundance of mussels in this region. (author)

English Language Proficiency Tests and Academic Achievement: A Study on the Malaysian University English Test as a Predictor of Technical Programme Undergraduates Academic Achievement

Directory of Open Access Journals (Sweden)

Nurhazlini Rahmat

2015-02-01

Full Text Available In the Malaysian education system, English has always played an important role. In acknowledging its importance, Malaysian University English Test (MUET has been introduced to enable continued emphasis on this role.  MUET has been made compulsory for those who wish to pursue a first degree programme in local universities. This study aims to examine the relationship between English language proficiency test (as measured by MUET bands to predict the undergraduates academic achievement (as measured by Cumulative Grade Point Average score. It also aims to determine the recommended MUET band as an entry requirement for prospective technical programme undergraduates in Universiti Putra Malaysia (UPM. The study was carried out among 225 final year undergraduates of five different faculties in UPM, namely Faculty of Engineering, Faculty of Forestry, Faculty of Biotechnology and Biomolecular, Faculty of Food Science and Technology, and Faculty of Veterinary Medicine.  The data used were obtained by administering a brief questionnaire and were quantitatively analysed using Statistical Package for Social Science (SPSS version 19.  The study revealed that there is a medium positive correlation between English language proficiency and academic achievement where students who have scored higher bands for MUET are the ones who obtained higher CGPA in their study. Based on the findings, it is recommended that UPM and other local universities make changes towards the minimum MUET entry requirement to help prospective undergraduates excel in their academic study. Keywords: English language proficiency, academic achievement, technical programme, MUET, CGPA

Fusion technology programme

International Nuclear Information System (INIS)

Finken, D.

1985-10-01

KfK is involved in the European Fusion Programme predominantly in the NET and Fusion Technology part. The following fields of activity are covered: Studies for NET, alternative confinement concepts, and needs and issues of integral testing. Research on structural materials. Development of superconducting magnets. Gyrotron development (part of the Physics Programme). Nuclear technology (breeding materials, blanket design, tritium technology, safety and environmental aspects of fusion, remote maintenance). Reported here are status and results of work under contracts with the CEC within the NET and Technology Programme. The aim of the major part of this R and D work is the support of NET, some areas (e.g. materials, safety and environmental impact, blanket design) have a wider scope and address problems of a demonstration reactor. In the current working period, several new proposals have been elaborated to be implemented into the 85/89 Euratom Fusion Programme. New KfK contributions relate to materials research (dual beam and fast reactor irradiations, ferritic steels), to blanket engineering (MHD-effects) and to safety studies (e.g. magnet safety). (orig./GG)

English Language Proficiency Tests and Academic Achievement: A Study on the Malaysian University English Test as a Predictor of Technical Programme Undergraduates Academic Achievement

Science.gov (United States)

Rahmat, Nurhazlini; Min, Lau Sing; Sungif, Nur Atiqah Md.; Yusup, Farah Nabillah Mior

2015-01-01

In the Malaysian education system, English has always played an important role. In acknowledging its importance, Malaysian University English Test (MUET) has been introduced to enable continued emphasis on this role. MUET has been made compulsory for those who wish to pursue a first degree programme in local universities. This study aims to…

Overview of fast reactor structural materials programme in India

International Nuclear Information System (INIS)

Rodriguez, P.; Paranjpe, S.R.; Chetal, S.C.; Mannan, S.L.; Ray, S.K.; Seetharaman, V.; Srinivasan, G.

The fast reactor structural materials activities in India comprise of the programme on the materials for the Fast Breeder Test Reactor (FBTR), the construction of which is nearing completion, and the programme on the candidate materials for the Prototype Fast Breeder Reactor (PFBR) which is now in the design stage. For the materials in use in FBTR, the main thrust has been towards detailed evaluation and documentation of long term (creep) properties of type 316 stainless steel base material in air. For the PFBR the philosophy has been to identify the candidate materials and to evolve a wider scope for the testing and evaluation programmes. The major structural component is identified as variants of type 304 stainless steel and the programmes undertaken include study of low cycle fatigue properties and environmental effects on creep and stress rupture properties. Evaluations of aging embrittlement of type 316 stainless steel base material and weldments are also in progress. The paper lists the testing programmes identified for adoption in the near future. These include creep-fatigue damage studies and fracture mechanics studies on weldments for type 304 stainless steel and testing programme on 2.25 Cr-1 Mo and 9 Cr-1 Mo steels, the identified candidate materials for steam generators. The development efforts also include a comprehensive programme on inelastic analysis procedure. (author)

Grid-connected polymer solar panels: initial considerations of cost, lifetime, and practicality

DEFF Research Database (Denmark)

Medford, Andrew James; Lilliedal, Mathilde Raad; Jørgensen, Mikkel

2010-01-01

Large solar panels were constructed from polymer solar cell modules prepared using full roll-to-roll (R2R) manufacture based on the previously published ProcessOne. The individual flexible polymer solar modules comprising multiple serially connected single cell stripes were joined electrically...... and laminated between a 4 mm tempered glass window and black Tetlar foil using two sheets of 0.5 mm thick ethylene vinyl acetate (EVA). The panels produced up to 8 W with solar irradiance of ~960 Wm−2, and had outer dimensions of 1 m x 1.7 m with active areas up to 9180 cm2. Panels were mounted on a tracking...... station and their output was grid connected between testing. Several generations of polymer solar cells and panel constructions were tested in this context to optimize the production of polymer solar panels. Cells lacking a R2R barrier layer were found to degrade due to diffusion of oxygen after less than...

Automatic Color Sorting of Hardwood Edge-Glued Panel Parts

Science.gov (United States)

D. Earl Kline; Richard Conners; Qiang Lu; Philip A. Araman

1997-01-01

This paper describes an automatic color sorting system for red oak edge-glued panel parts. The color sorting system simultaneously examines both faces of a panel part and then determines which face has the "best" color, and sorts the part into one of a number of color classes at plant production speeds. Initial test results show that the system generated over...

Plasma Facing Components Generic Facilities Review Panel (PFC-GFRP): Final report

International Nuclear Information System (INIS)

McGrath, R.; Allen, S.; Hill, D.; Brooks, J.; Mattas, R.; Davis, J.; Lipschultz, B.; Ulrickson, M.

1993-10-01

The Plasma Facing Components (PFC) Facilities Review Panel was chartered by the US Department of Energy, Office of Fusion Energy, ITER (International Thermonuclear Experimental Reactor) and Technology Division, to outline the program plan and identify the supporting test facilities that lead to reliable, long-lived plasma facing components for ITER. This report summarizes the panel's findings and identifies the necessary and sufficient set of test facilities required for ITER PFC development

Ultra-low-density genotype panels for breed assignment of Angus and Hereford cattle.

Science.gov (United States)

Judge, M M; Kelleher, M M; Kearney, J F; Sleator, R D; Berry, D P

2017-06-01

Angus and Hereford beef is marketed internationally for apparent superior meat quality attributes; DNA-based breed authenticity could be a useful instrument to ensure consumer confidence on premium meat products. The objective of this study was to develop an ultra-low-density genotype panel to accurately quantify the Angus and Hereford breed proportion in biological samples. Medium-density genotypes (13 306 single nucleotide polymorphisms (SNPs)) were available on 54 703 commercial and 4042 purebred animals. The breed proportion of the commercial animals was generated from the medium-density genotypes and this estimate was regarded as the gold-standard breed composition. Ten genotype panels (100 to 1000 SNPs) were developed from the medium-density genotypes; five methods were used to identify the most informative SNPs and these included the Delta statistic, the fixation (F st) statistic and an index of both. Breed assignment analyses were undertaken for each breed, panel density and SNP selection method separately with a programme to infer population structure using the entire 13 306 SNP panel (representing the gold-standard measure). Breed assignment was undertaken for all commercial animals (n=54 703), animals deemed to contain some proportion of Angus based on pedigree (n=5740) and animals deemed to contain some proportion of Hereford based on pedigree (n=5187). The predicted breed proportion of all animals from the lower density panels was then compared with the gold-standard breed prediction. Panel density, SNP selection method and breed all had a significant effect on the correlation of predicted and actual breed proportion. Regardless of breed, the Index method of SNP selection numerically (but not significantly) outperformed all other selection methods in accuracy (i.e. correlation and root mean square of prediction) when panel density was ⩾300 SNPs. The correlation between actual and predicted breed proportion increased as panel density increased. Using

Preliminary evaluation of the impact of a Web-based HIV testing programme in Abruzzo Region on the prevention of late HIV presentation and associated mortality

Directory of Open Access Journals (Sweden)

Ennio Polilli

2018-04-01

Full Text Available Objective: This study aimed to analyze the efficacy of a Web-based testing programme in terms of the prevention of late HIV presentation. The clinical characteristics of patients diagnosed with HIV via the Web-based testing programme were compared to those of patients diagnosed in parallel via standard diagnostic care procedures. Methods: This study included the clinical and demographic data of newly diagnosed HIV patients enrolled at the study clinic between February 2014 and June 2017. These patients were diagnosed either via standard diagnostic procedures or as a result of the Web-based testing programme. Results: Eighty-eight new cases of HIV were consecutively enrolled; their mean age was 39.1 ± 13.0 years. Fifty-nine patients (67% were diagnosed through standard diagnostic procedures and 29 (33% patients came from the Web-based testing programme. Late presentation (62% vs. 34%, p = 0.01 and AIDS-defining conditions at presentation (13 vs. 1, p = 0.02 were significantly more frequent in the standard care group than in the Web-based group; four of 13 patients with AIDS diagnosed under standard diagnostic procedures died, versus none in the Web-based testing group (p < 0.001. Conclusions: Web-based recruitment for voluntary and free HIV testing helped to diagnose patients with less advanced HIV disease and no risk of death, from all at-risk groups, in comparison with standard care testing. Keywords: AIDS, HIV, Late presentation, Voluntary and free testing, HIV diagnosis, Sexually transmitted infections

Friction stir welding (FSW of aluminium foam sandwich panels

Directory of Open Access Journals (Sweden)

M. Bušić

2016-07-01

Full Text Available The article focuses on the influence of welding speed and tool tilt angle upon the mechanical properties at the friction stir welding of aluminium foam sandwich panels. Double side welding was used for producing butt welds of aluminium sandwich panels applying insertion of extruded aluminium profile. Such insertion provided lower pressure of the tool upon the aluminium panels, providing also sufficient volume of the material required for the weldment formation. Ultimate tensile strength and flexural strength for three-point bending test have been determined for samples taken from the welded joints. Results have confirmed anticipated effects of independent variables.

Paneling architectural freeform surfaces

KAUST Repository

Eigensatz, Michael

2010-07-25

The emergence of large-scale freeform shapes in architecture poses big challenges to the fabrication of such structures. A key problem is the approximation of the design surface by a union of patches, so-called panels, that can be manufactured with a selected technology at reasonable cost, while meeting the design intent and achieving the desired aesthetic quality of panel layout and surface smoothness. The production of curved panels is mostly based on molds. Since the cost of mold fabrication often dominates the panel cost, there is strong incentive to use the same mold for multiple panels. We cast the major practical requirements for architectural surface paneling, including mold reuse, into a global optimization framework that interleaves discrete and continuous optimization steps to minimize production cost while meeting user-specified quality constraints. The search space for optimization is mainly generated through controlled deviation from the design surface and tolerances on positional and normal continuity between neighboring panels. A novel 6-dimensional metric space allows us to quickly compute approximate inter-panel distances, which dramatically improves the performance of the optimization and enables the handling of complex arrangements with thousands of panels. The practical relevance of our system is demonstrated by paneling solutions for real, cutting-edge architectural freeform design projects.

Paneling architectural freeform surfaces

KAUST Repository

Eigensatz, Michael

2010-07-26

The emergence of large-scale freeform shapes in architecture poses big challenges to the fabrication of such structures. A key problem is the approximation of the design surface by a union of patches, socalled panels, that can be manufactured with a selected technology at reasonable cost, while meeting the design intent and achieving the desired aesthetic quality of panel layout and surface smoothness. The production of curved panels is mostly based on molds. Since the cost of mold fabrication often dominates the panel cost, there is strong incentive to use the same mold for multiple panels. We cast the major practical requirements for architectural surface paneling, including mold reuse, into a global optimization framework that interleaves discrete and continuous optimization steps to minimize production cost while meeting user-specified quality constraints. The search space for optimization is mainly generated through controlled deviation from the design surface and tolerances on positional and normal continuity between neighboring panels. A novel 6-dimensional metric space allows us to quickly compute approximate inter-panel distances, which dramatically improves the performance of the optimization and enables the handling of complex arrangements with thousands of panels. The practical relevance of our system is demonstrated by paneling solutions for real, cutting-edge architectural freeform design projects. © 2010 ACM.

Life Skills in Educational Contexts: Testing the Effects of an Intervention Programme

Science.gov (United States)

Gomes, A. Rui; Marques, Brazelina

2013-01-01

This study examined the effects of a training programme on students' acquisition of life skills, life satisfaction, life orientation and expectations about academic achievement. Participants were allocated to either an intervention group ("n"?=?41) that took part in a life skills programme, or a control group ("n"?=?43).…

Does electricity consumption panel Granger cause GDP? A new global evidence

Energy Technology Data Exchange (ETDEWEB)

Narayan, Paresh Kumar [School of Accounting, Economics and Finance, Faculty of Business and Economics, Deakin University, Melbourne (Australia); Narayan, Seema [School of Economics, Finance, and Marketing, RMIT University, Melbourne (Australia); Popp, Stephan [Department of Economics, University of Duisburg-Essen (Germany)

2010-10-15

The goal of this paper is to undertake a panel data investigation of long-run Granger causality between electricity consumption and real GDP for seven panels, which together consist of 93 countries. We use a new panel causality test and find that in the long-run both electricity consumption and real GDP have a bidirectional Granger causality relationship except for the Middle East where causality runs only from GDP to electricity consumption. Finally, for the G6 panel the estimates reveal a negative sign effect, implying that increasing electricity consumption in the six most industrialised nations will reduce GDP. (author)

Panel 5: Microbiology and Immunology Panel

Science.gov (United States)

Murphy, Timothy F.; Chonmaitree, Tasnee; Barenkamp, Stephen; Kyd, Jennelle; Nokso-Koivisto, Johanna; Patel, Janak A.; Heikkinen, Terho; Yamanaka, Noboru; Ogra, Pearay; Swords, W. Edward; Sih, Tania; Pettigrew, Melinda M.

2014-01-01

Objective The objective is to perform a comprehensive review of the literature from January 2007 through June 2011 on the virology, bacteriology, and immunology related to otitis media. Data Sources PubMed database of the National Library of Medicine. Review Methods Three subpanels with co-chairs comprising experts in the virology, bacteriology, and immunology of otitis media were formed. Each of the panels reviewed the literature in their respective fields and wrote draft reviews. The reviews were shared with all panel members, and a second draft was created. The entire panel met at the 10th International Symposium on Recent Advances in Otitis Media in June 2011 and discussed the review and refined the content further. A final draft was created, circulated, and approved by the panel. Conclusion Excellent progress has been made in the past 4 years in advancing an understanding of the microbiology and immunology of otitis media. Advances include laboratory-based basic studies, cell-based assays, work in animal models, and clinical studies. Implications for Practice The advances of the past 4 years formed the basis of a series of short-term and long-term research goals in an effort to guide the field. Accomplishing these goals will provide opportunities for the development of novel interventions, including new ways to better treat and prevent otitis media. PMID:23536533

Grid-connected polymer solar panels: initial considerations of cost, lifetime, and practicality.

Science.gov (United States)

Medford, Andrew J; Lilliedal, Mathilde R; Jørgensen, Mikkel; Aarø, Dennis; Pakalski, Heinz; Fyenbo, Jan; Krebs, Frederik C

2010-09-13

Large solar panels were constructed from polymer solar cell modules prepared using full roll-to-roll (R2R) manufacture based on the previously published ProcessOne. The individual flexible polymer solar modules comprising multiple serially connected single cell stripes were joined electrically and laminated between a 4 mm tempered glass window and black Tetlar foil using two sheets of 0.5 mm thick ethylene vinyl acetate (EVA). The panels produced up to 8 W with solar irradiance of ~960 Wm⁻², and had outer dimensions of 1 m x 1.7 m with active areas up to 9180 cm². Panels were mounted on a tracking station and their output was grid connected between testing. Several generations of polymer solar cells and panel constructions were tested in this context to optimize the production of polymer solar panels. Cells lacking a R2R barrier layer were found to degrade due to diffusion of oxygen after less than a month, while R2R encapsulated cells showed around 50% degradation after 6 months but suffered from poor performance due to de-lamination during panel production. A third generation of panels with various barrier layers was produced to optimize the choice of barrier foil and it was found that the inclusion of a thin protective foil between the cell and the barrier foil is critical. The findings provide a preliminary foundation for the production and optimization of large-area polymer solar panels and also enabled a cost analysis of solar panels based on polymer solar cells.

Technology Programme

Energy Technology Data Exchange (ETDEWEB)

Batistoni, Paola; De Marco, Francesco; Pieroni, Leonardo [ed.

2005-07-01

The technology activities carried out by the Euratom-ENEA Association in the framework of the European Fusion Development Agreement concern the Next Step (International Thermonuclear Experimental Reactor - ITER), the Long-Term Programme (breeder blanket, materials, International Fusion Materials Irradiation Facility - IFMIF), Power Plant Conceptual Studies and Socio-Economic Studies. The Underlying Technology Programme was set up to complement the fusion activities as well to develop technologies with a wider range of interest. The Technology Programme mainly involves staff from the Frascati laboratories of the Fusion Technical and Scientific Unit and from the Brasimone laboratories of the Advanced Physics Technologies Unit. Other ENEA units also provide valuable contributions to the programme. ENEA is heavily engaged in component development/testing and in design and safety activities for the European Fusion Technology Programme. Although the work documented in the following covers a large range of topics that differ considerably because they concern the development of extremely complex systems, the high level of integration and coordination ensures the capability to cover the fusion system as a whole. In 2004 the most significant testing activities concerned the ITER primary beryllium-coated first wall. In the field of high-heat-flux components, an important achievement was the qualification of the process for depositing a copper liner on carbon fibre composite (CFC) hollow tiles. This new process, pre-brazed casting (PBC), allows the hot radial pressing (HRP) joining procedure to be used also for CFC-based armour monoblock divertor components. The PBC and HRP processes are candidates for the construction of the ITER divertor. In the materials field an important milestone was the commissioning of a new facility for chemical vapour infiltration/deposition, used for optimising silicon carbide composite (SiCf/SiC) components. Eight patents were deposited during 2004

Technology Programme

International Nuclear Information System (INIS)

Batistoni, Paola; De Marco, Francesco; Pieroni, Leonardo

2005-01-01

The technology activities carried out by the Euratom-ENEA Association in the framework of the European Fusion Development Agreement concern the Next Step (International Thermonuclear Experimental Reactor - ITER), the Long-Term Programme (breeder blanket, materials, International Fusion Materials Irradiation Facility - IFMIF), Power Plant Conceptual Studies and Socio-Economic Studies. The Underlying Technology Programme was set up to complement the fusion activities as well to develop technologies with a wider range of interest. The Technology Programme mainly involves staff from the Frascati laboratories of the Fusion Technical and Scientific Unit and from the Brasimone laboratories of the Advanced Physics Technologies Unit. Other ENEA units also provide valuable contributions to the programme. ENEA is heavily engaged in component development/testing and in design and safety activities for the European Fusion Technology Programme. Although the work documented in the following covers a large range of topics that differ considerably because they concern the development of extremely complex systems, the high level of integration and coordination ensures the capability to cover the fusion system as a whole. In 2004 the most significant testing activities concerned the ITER primary beryllium-coated first wall. In the field of high-heat-flux components, an important achievement was the qualification of the process for depositing a copper liner on carbon fibre composite (CFC) hollow tiles. This new process, pre-brazed casting (PBC), allows the hot radial pressing (HRP) joining procedure to be used also for CFC-based armour monoblock divertor components. The PBC and HRP processes are candidates for the construction of the ITER divertor. In the materials field an important milestone was the commissioning of a new facility for chemical vapour infiltration/deposition, used for optimising silicon carbide composite (SiCf/SiC) components. Eight patents were deposited during 2004

Comparisons between various cavity and panel noise reduction control in double-panel structures

NARCIS (Netherlands)

Ho, J.H.; Kalverboer, J.; Berkhoff, A.P.

2012-01-01

This paper presents comparisons between various panel and cavity resonance control methods to reduce the transmitted sound in a double-panel structure. The double-panel, which consists of two panels with air in the gap, has the advantages of low weight and effective transmission-loss at high

The WHO AFRO external quality assessment programme (EQAP): Linking laboratory networks through EQA programmes.

Science.gov (United States)

Boeras, Debrah I; Peeling, Rosanna W; Onyebujoh, Philip; Yahaya, Ali A; Gumede-Moeletsi, Hieronyma N; Ndihokubwayo, Jean B

2016-01-01

External Quality Assessment (EQA) surveys performed by the World Health Organization Regional Office for Africa (WHO AFRO) revealed the need for the strengthening of public health microbiology laboratories, particularly for testing of epidemic-prone diseases in the African Region. These surveys revealed common issues such as supply chain management, skilled personnel, logistical support and overall lack of quality standards. For sustainable improvements to health systems as well as global health security, deficiencies identified need to be actively corrected through robust quality assurance programmes and implementation of laboratory quality management systems. Given all the pathogens of public health importance, an external quality assessment programme with a focus on vaccine-preventable diseases and emerging and re-emerging dangerous pathogens is important, and should not be stand-alone, but integrated within laboratory networks as seen in polio, measles, yellow fever and rubella. In 2015, WHO AFRO collaborated with the US Centers for Disease Control and Prevention, the London School of Hygiene & Tropical Medicine and partners in a series of consultations with countries and national and regional EQA providers for the development of quality assurance models to support HIV point-of-care testing and monitoring. These consultations revealed similar challenges as seen in the WHO AFRO surveys. WHO AFRO brought forth its experience in implementing quality standards for health programmes, and also opened discussions on how lessons learned through such established programmes can be utilised to supporting and strengthening the introduction of early infant diagnosis of HIV and viral load point-of-care testing. An optimised external quality assessment programme will impact the ability of countries to meet core capacities, providing improved quality management systems, improving the confidence of diagnostic network services in Africa, and including capacities to detect events

Nuclear electronic equipment for control and monitoring panel. Procedure guide for on-site tests of nuclear reactor instruments

International Nuclear Information System (INIS)

1975-10-01

By the use of a procedure for on-site testing of nuclear reactor instruments it should be possible to judge their ability to guarantee the reactor safety and availability at the moment of divergence or during operation. Such a procedure must therefore be created as a work implement for the quick and reliable installation of electronic devices necessary for nuclear reactor control and supervision. A standard document is proposed for this purpose, allowing a ''test programme'' to be set up before the equipment is installed on the site [fr

Nuclear thermal propulsion technology: Results of an interagency panel in FY 1991

International Nuclear Information System (INIS)

Clark, J.S.; Mcdaniel, P.; Howe, S.; Helms, I.; Stanley, M.

1993-04-01

NASA LeRC was selected to lead nuclear propulsion technology development for NASA. Also participating in the project are NASA MSFC and JPL. The U.S. Department of Energy will develop nuclear technology and will conduct nuclear component, subsystem, and system testing at appropriate DOE test facilities. NASA program management is the responsibility of NASA/RP. The project includes both nuclear electric propulsion (NEP) and nuclear thermal propulsion (NTP) technology development. This report summarizes the efforts of an interagency panel that evaluated NTP technology in 1991. Other panels were also at work in 1991 on other aspects of nuclear propulsion, and the six panels worked closely together. The charters for the other panels and some of their results are also discussed. Important collaborative efforts with other panels are highlighted. The interagency (NASA/DOE/DOD) NTP Technology Panel worked in 1991 to evaluate nuclear thermal propulsion concepts on a consistent basis. Additionally, the panel worked to continue technology development project planning for a joint project in nuclear propulsion for the Space Exploration Initiative (SEI). Five meetings of the panel were held in 1991 to continue the planning for technology development of nuclear thermal propulsion systems. The state-of-the-art of the NTP technologies was reviewed in some detail. The major technologies identified were as follows: fuels, coatings, and other reactor technologies; materials; instrumentation, controls, health monitoring and management, and associated technologies; nozzles; and feed system technology, including turbopump assemblies

Public preferences for vaccination programmes during pandemics caused by pathogens transmitted through respiratory droplets - a discrete choice experiment in four European countries, 2013

NARCIS (Netherlands)

D. Determann (Domino); I.J. Korfage (Ida); A. Fagerlin (Angela); E.W. Steyerberg (Ewout); M.C.J. Bliemer (Michiel); H.A.C.M. Voeten (Hélène); J.H. Richardus (Jan Hendrik); M.S. Lambooij (Mattijs); E.W. de Bekker-Grob (Esther)

2016-01-01

textabstractThis study aims to quantify and compare preferences of citizens from different European countries for vaccination programme characteristics during pandemics, caused by pathogens which are transmitted through respiratory droplets. Internet panel members, nationally representative based on

COMPARISON OF SIMPLE SUM AND DIVISIA MONETARY AGGREGATES USING PANEL DATA ANALYSIS

Directory of Open Access Journals (Sweden)

Sadullah CELIK

2009-07-01

Full Text Available It is well documented that financial innovation has led to poor performance of simple sum method of monetary aggregation destabilizing the historical relationship between monetary aggregates and ultimate target variables like rate of growth and rate of unemployment during the liberalization period of 1980s. This study tries to emphasize the superiority of an alternative method of aggregation over the simple sum method, namely Divisia monetary aggregates, employing panel data analysis for United States, United Kingdom, Euro Area and Japan for the period between 1980Q1 and 1993Q3. After investigating the order of stationarity of the panel data set through several panel unit root tests, we perform advanced panel cointegration tests to check the existence of a long run link between the Divisia monetary aggregates and income and interest rates in a simple Keynesian money demand function.

Solar reflection panels

Science.gov (United States)

Diver, Jr., Richard B.; Grossman, James W [Albuquerque, NM; Reshetnik, Michael [Boulder, CO

2006-07-18

A solar collector comprising a glass mirror, and a composite panel, wherein the back of the mirror is affixed to a front surface of the composite panel. The composite panel comprises a front sheet affixed to a surface of a core material, preferably a core material comprising a honeycomb structure, and a back sheet affixed to an opposite surface of the core material. The invention may further comprise a sealing strip, preferably comprising EPDM, positioned between the glass mirror and the front surface of the composite panel. The invention also is of methods of making such solar collectors.

The QUENCH programme at Forschungszentrum Karlsruhe (FZK)

International Nuclear Information System (INIS)

Steinbrueck, M.; Schanz, G.; Sepold, L.; Stuckert, J.; Hering, W.; Homann, C.; Miassoedov, A.

2004-01-01

The QUENCH programme at FZK was launched to investigate the hydrogen source term during reflood of an overheated reactor core. It consists of large scale bundle experiments, separate-effects tests, modelling activities and application and validation of severe fuel damage (SFD) code systems. The paper describes the experimental part of the programme, namely the experimental facilities and test rigs as well as selected results obtained during the recent years. (author)

On the link between oil and commodity prices: a panel VAR approach

International Nuclear Information System (INIS)

Bremond, Vincent; Hache, Emmanuel; Joets, Marc

2013-12-01

The aim of this paper is to study the relationships between the price of oil and a large dataset of commodity prices, relying on panel data settings. Using second generation panel co-integration tests, our findings show that the WTI and commodity prices are not linked in the long term. Nevertheless, considering our results in causality tests, we show that short-run relations exist, mainly from the price of crude oil to commodity prices. We thus implement a panel VAR estimation with an impulse response function analysis. Two main conclusions emerge: (i) fast co-movements are highlighted, while (ii) market efficiency is emphasized. (authors)

Sustainable Absorption Panels from Agricultural Wastes

Directory of Open Access Journals (Sweden)

Ismail F.Z.

2014-01-01

Full Text Available Noise has become a serious environmental problem and there are demands for alternative sustainable materials which capable to reduce the noise level at various frequency ranges. Therefore, the aim of this research is to study the potential of turning the agricultural waste and waste paper into a sound absorption panel. For the purpose of this study, combination of two materials was under studied; coconut coir fibre from agriculture waste and shredded waste paper from the office. There were two main objective of the research; first is to develop absorption panels from coconut coir powder that available locally with a combination of shredded paper at different percentage of mixture. Second objective is to identify the absorption rate of the panels. The study encompasses the fabrication of the particle board using the coconut husk powder mix with shredded waste paper and using the gypsum powder as the binder for the two materials. Four acoustic panels of size 0.5m x 0.5m and 0.012 m thick were fabricated with different mix ratio; 25% of coconut coir powder mixed with 75% of shredded waste papers for sample 1, 50% both of the material for sample 2, 75% of coconut coir powder mixed with 25% of shredded waste paper for sample 3, and lastly 100% of coconut coir powder for sample 4. The absorption coefficient of the panels was tested in a reverberation chamber and in accordance with ISO 354:1985 standards. Based on the results, sample 1 gave the highest absorption coefficient compared to sample 2, 3 and 4. It can be concluded that the acoustic panel made from a mixture of 25% coconut coir powder with 75% shredded waste paper provided higher absorption coefficient compared to the performance of the other samples. This might be caused by the size of the coir powder which is very small, creating less void space in between the panel and thus causing it to absorb less sound. Since sound absorption is very much affected by the availability of void space of

Analysis of disconnected diallel mating designs II: results from a third generation progeny test of the New Zealand radiata pine improvement programme.

Science.gov (United States)

J.N. King; M.J. Carson; G.R. Johnson

1998-01-01

Genetic parameters from a second generation (F2) disconnected diallel progeny test of the New Zealand radiata pine improvement programme are presented. Heritability estimates of growth and yield traits of 0.2 are similar to progeny test results of the previous generation (F1) generation tests. A trend of declining dominance...

Financing an efficient adaptation programme to climate change: A contingent valuation method tested in Malaysia

Directory of Open Access Journals (Sweden)

Banna Hasanul

2016-03-01

Full Text Available This paper assesses farmers’ willingness to pay for an efficient adaptation programme to climate change for Malaysian agriculture. We used the contingent valuation method to determine the monetary assessment of farmers’ preferences for an adaptation programme. We distributed a structured questionnaire to farmers in Selangor, Malaysia. Based on the survey, 74% of respondents are willing to pay for the adaptation programme with several factors such as socio-economic and motivational factors exerting greater influences over their willingness to pay. However, a significant number of respondents are not willing to pay for the adaptation programme. The Malaysian government, along with social institutions, banks, NGOs, and media could come up with fruitful awareness programmes to motivate financing the programme. Financial institutions such as banks, insurances, leasing firms, etc. along with government and farmers could also donate a substantial portion for the adaptation programme as part of their corporate social responsibility (CSR.

Study of double wall panels for use in propeller driven aircraft

Science.gov (United States)

Atwal, M.; Bernhard, R.

1984-05-01

Propeller driven aircraft have exhibited high levels of interior noise. Most absorption materials are not effective at low frequencies where maximum noise levels occur. Two panels separated by an air gap are suggested as an alternative means of noise attenuation. This design produces an impedance mismatch where a sound wave travels backwards to the source. The higher the impedance, the higher the reflected soundwave intensity. Two aluminum panels with helium in between and two panels with one being perforated were investigated. Helium increases the transmission loss because of a greater impedance mismatch than air. The transmission loss of the unperforated panel is higher throughout the frequency range tested.

Overview on international experimental programmes on power ramping and fission gas release

International Nuclear Information System (INIS)

Knaab, H.; Lang, P.M.; Mogard, H.

1983-01-01

During the last years a number of internationally sponsored experimental programmes were initiated to study the LWR fuel behaviour during ramping and fission gas release at higher burnup levels. Common interest and the limited availability of experimental facilities and appropriate test fuel rods have led to valuable cooperation of many organizations throughout the nuclear community. These programmes are performed by the experimental staff from research centers with their experimental facilities. Fuel vendors and several utilities contribute by supply and irradiation of test fuel rods. The aim of this paper is to provide a synopsis of the following programmes: Studsvik Projects: Interramp, Overramp, Superramp, Demoramp I and II; Petten, High Burnup PWR Ramp Test Programme; Mol, Tribulation Programme; BNWL, High Burnup Effects Programme; Risoe Fission Gas Project; Related tasks within the OECD Halden Reactor Project. The objectives of the programme, their work scope and main results will be summarized on the basis of presently available information. An outlook to future proposed programmes will be given. (author)

Overview on international experimental programmes on power ramping and fission gas release

International Nuclear Information System (INIS)

Knaab, H.; Lang, P.M.

1985-01-01

During the last few years a number of internationally sponsored experimental programmes have been initiated to study LWR fuel behaviour during ramping and fission gas release at high burnup levels. Common interest and the limited availability of experimental facilities and appropriate test fuel rods have led to valuable cooperation between many organizations throughout the nuclear community. These programmes are carried out by experienced staff from research centres using the centres' experimental facilities. Fuel vendors and several utilities contribute by supplying and irradiating the test fuel rods. The aim of this paper is to provide a synopsis of the following programmes: (a) Studsvik Projects: Interramp, Demoramp I and II, Overramp, Superramp; (b) Petten, High Burnup PWR Ramp Test Programme; (c) Mol, Tribulation Programme; (d) BNWL, High Burnup Effects Programme; (e) Riso Fission Gas Project; and (f) related tasks within the OECD Halden Reactor Project. The objectives of the programmes, their scope and the main results will be summarized. An overview of proposed future programmes will be given. (author)

Programmes de conception de pages Web (article en arabe ...

African Journals Online (AJOL)

aux collectivités. Raisons pour lesquelles sont testés dix programmes dans une optique débutant, notamment HTML, script JAVA et autres. Testes qui ont permis de dégager les avantages et inconvénients de chacun des programmes cités.

A two-medium thermal neutron spectrum programme

International Nuclear Information System (INIS)

Bindon, D.C.

1960-07-01

A computer programme is described for computing the thermal neutron spectra and effective cross-sections in a reactor system of two media by the method of H. Takahashi. The programme has been prepared and tested for use with the Ferranti Mercury computer. (author)

Causal Relationship Between Relative Price Variability and Inflation in Turkey: Evidence from Panel Data

Directory of Open Access Journals (Sweden)

Nebiye Yamak

2016-06-01

Full Text Available This study investigates the causal relationship between inflation and relative price variability in Turkey for the period of January 2003-January 2014, by using panel data. In the study, a Granger (1969 non-causality test in heterogeneous panel data models developed by Dumitrescu and Hurlin (2012 is utilized to determine the causal relations between inflation rate relative price variability. The panel data consists of 4123 observations: 133 time observations and 31 cross-section observations. The results of panel causality test indicate that there is a bidirectional causality between inflation rate and relative price variability by not supporting the imperfection information model of Lucas and the menu cost model of Ball and Mankiw.

The solar panels of the spacecraft Stardust are deployed before undergoing lighting test in the PHSF

Science.gov (United States)

1999-01-01

In the Payload Hazardous Servicing Facility, workers look over the solar panels on the Stardust spacecraft that are deployed for lighting tests. Stardust is scheduled to be launched aboard a Boeing Delta II rocket from Launch Pad 17A, Cape Canaveral Air Station, on Feb. 6, 1999, for a rendezvous with the comet Wild 2 in January 2004. Stardust will use a substance called aerogel to capture comet particles flying off the nucleus of the comet, plus collect interstellar dust for later analysis. The collected samples will return to Earth in a sample return capsule to be jettisoned as it swings by Earth in January 2006.

Interfacial Crack Arrest in Sandwich Panels with Embedded Crack Stoppers Subjected to Fatigue Loading

DEFF Research Database (Denmark)

Martakos, G.; Andreasen, J. H.; Berggreen, Christian

2017-01-01

A novel crack arresting device has been implemented in sandwich panels and tested using a special rig to apply out-of-plane loading on the sandwich panel face-sheets. Fatigue crack propagation was induced in the face-core interface of the sandwich panels which met the crack arrester. The effect o...

Opt-Out Panel Testing for HIV, Hepatitis B and Hepatitis C in an Urban Emergency Department: A Pilot Study.

LENUS (Irish Health Repository)

O'Connell, Sarah

2016-01-01

Studies suggest 2 per 1000 people in Dublin are living with HIV, the level above which universal screening is advised. We aimed to assess the feasibility and acceptability of a universal opt-out HIV, Hepatitis B and Hepatitis C testing programme for Emergency Department patients and to describe the incidence and prevalence of blood-borne viruses in this population.

Large thermal protection system panel

Science.gov (United States)

Weinberg, David J. (Inventor); Myers, Franklin K. (Inventor); Tran, Tu T. (Inventor)

2003-01-01

A protective panel for a reusable launch vehicle provides enhanced moisture protection, simplified maintenance, and increased temperature resistance. The protective panel includes an outer ceramic matrix composite (CMC) panel, and an insulative bag assembly coupled to the outer CMC panel for isolating the launch vehicle from elevated temperatures and moisture. A standoff attachment system attaches the outer CMC panel and the bag assembly to the primary structure of the launch vehicle. The insulative bag assembly includes a foil bag having a first opening shrink fitted to the outer CMC panel such that the first opening and the outer CMC panel form a water tight seal at temperatures below a desired temperature threshold. Fibrous insulation is contained within the foil bag for protecting the launch vehicle from elevated temperatures. The insulative bag assembly further includes a back panel coupled to a second opening of the foil bag such that the fibrous insulation is encapsulated by the back panel, the foil bag, and the outer CMC panel. The use of a CMC material for the outer panel in conjunction with the insulative bag assembly eliminates the need for waterproofing processes, and ultimately allows for more efficient reentry profiles.

Reflecting variable opening insulating panel

International Nuclear Information System (INIS)

Nungesser, W.T.

1976-01-01

A description is given of a reflecting variable opening insulating panel assembly, comprising a static panel assembly of reflecting insulation sheets forming a cavity along one side of the panel and a movable panel opening out by sliding from the cavity of the static panel, and a locking device for holding the movable panel in a position extending from the cavity of the static panel. This can apply to a nuclear reactor of which the base might require maintenance and periodical checking and for which it is desirable to have available certain processes for the partial dismantling of the insulation [fr

Microbiological specifications and testing methods for irradiated food. Report of a panel of experts

International Nuclear Information System (INIS)

1970-01-01

In recent years there has been increased interest in the development of food items processed by means of ionizing radiation, wherever that form of preservation might show advantage over other methods. If this method becomes successful, the various items will be commercially exploited; it would then be convenient to have similar legislation in many countries of the world to control this type of processing and to facilitate international trade. To gather information and suggestions in order to devise legislation on irradiated food, a Joint FAO/IAEA/ WHO Expert Committee on the Technical Basis for Legislation on Irradiated Food was held in Rome on 21-28 April 1964. The Committee's report, 'The technical basis for legislation on irradiated food', was published as FAO Atomic Energy Series No.6 and WHO Technical Series No. 316. The Committee's terms of reference were to consider the available evidence on the effect on food of treatment with ionizing radiation in the context of wholesomeness and safety for consumption. Nutritional aspects were taken into account, but microbiological safety and microbiological methods for irradiated food were excluded since these subjects were believed to be too broad for adequate coverage in the working time available at the meeting. However, realizing the importance of radiation microbiology and the need for guidance in formulating regulations in this field, the committee drafted the following recommendation: 'The methods and standards used to ensure the microbiological safety of the irradiated product should, as a matter of urgency, be subject to review by competent international bodies in order that internationally acceptable methods and standards may be agreed upon'. In response to this recommendation an FAO/IAEA Panel on Microbiological Standards and Testing Methods for Irradiated Food was held in Vienna on 22-26 June 1965, in collaboration with the International Association of Microbiological Societies (IAMS). This was a working

Microbiological specifications and testing methods for irradiated food. Report of a panel of experts

International Nuclear Information System (INIS)

1971-01-01

In recent years there has been increased interest in the development of food items processed by means of ionizing radiation, wherever that form of preservation might show advantage over other methods. If this method becomes successful, the various items will be commercially exploited; it would then be convenient to have similar legislation in many countries of the world to control this type of processing and to facilitate international trade. To gather information and suggestions in order to devise legislation on irradiated food, a Joint FAO/IAEA/ WHO Expert Committee on the Technical Basis for Legislation on Irradiated Food was held in Rome on 21-28 April 1964. The Committee's report, 'The technical basis for legislation on irradiated food', was published as FAO Atomic Energy Series No.6 and WHO Technical Series No. 316. The Committee's terms of reference were to consider the available evidence on the effect on food of treatment with ionizing radiation in the context of wholesomeness and safety for consumption. Nutritional aspects were taken into account, but microbiological safety and microbiological methods for irradiated food were excluded since these subjects were believed to be too broad for adequate coverage in the working time available at the meeting. However, realizing the importance of radiation microbiology and the need for guidance in formulating regulations in this field, the committee drafted the following recommendation: 'The methods and standards used to ensure the microbiological safety of the irradiated product should, as a matter of urgency, be subject to review by competent international bodies in order that internationally acceptable methods and standards may be agreed upon'. In response to this recommendation an FAO/IAEA Panel on Microbiological Standards and Testing Methods for Irradiated Food was held in Vienna on 22-26 June 1965, in collaboration with the International Association of Microbiological Societies (IAMS). This was a working

Microbiological specifications and testing methods for irradiated food. Report of a panel of experts

Energy Technology Data Exchange (ETDEWEB)

NONE

1970-04-01

In recent years there has been increased interest in the development of food items processed by means of ionizing radiation, wherever that form of preservation might show advantage over other methods. If this method becomes successful, the various items will be commercially exploited; it would then be convenient to have similar legislation in many countries of the world to control this type of processing and to facilitate international trade. To gather information and suggestions in order to devise legislation on irradiated food, a Joint FAO/IAEA/ WHO Expert Committee on the Technical Basis for Legislation on Irradiated Food was held in Rome on 21-28 April 1964. The Committee's report, 'The technical basis for legislation on irradiated food', was published as FAO Atomic Energy Series No.6 and WHO Technical Series No. 316. The Committee's terms of reference were to consider the available evidence on the effect on food of treatment with ionizing radiation in the context of wholesomeness and safety for consumption. Nutritional aspects were taken into account, but microbiological safety and microbiological methods for irradiated food were excluded since these subjects were believed to be too broad for adequate coverage in the working time available at the meeting. However, realizing the importance of radiation microbiology and the need for guidance in formulating regulations in this field, the committee drafted the following recommendation: 'The methods and standards used to ensure the microbiological safety of the irradiated product should, as a matter of urgency, be subject to review by competent international bodies in order that internationally acceptable methods and standards may be agreed upon'. In response to this recommendation an FAO/IAEA Panel on Microbiological Standards and Testing Methods for Irradiated Food was held in Vienna on 22-26 June 1965, in collaboration with the International Association of Microbiological Societies (IAMS). This was a working

PERFORMANCE OF RC AND FRC WALL PANELS REINFORCED WITH MILD STEEL AND GFRP COMPOSITES IN BLAST EVENTS

Energy Technology Data Exchange (ETDEWEB)

Timothy Garfield; William D. Richins; Thomas K. Larson; Chris P. Pantelides; James E. Blakeley

2011-06-01

The structural integrity of reinforced concrete structures in blast events is important for critical facilities. This paper presents experimental data generated for calibrating detailed finite element models that predict the performance of reinforced concrete wall panels with a wide range of construction details under blast loading. The test specimens were 1.2 m square wall panels constructed using Normal Weight Concrete (NWC) or Fiber Reinforced Concrete (FRC). FRC consists of macro-synthetic fibers dispersed in NWC. Five types of panels were tested: NWC panels with steel bar reinforcement (Type A); FRC panels without additional reinforcement (Type B); FRC panels with steel bar reinforcement (Type C); NWC panels with glass fiber reinforced polymer (GFRP) bar reinforcement (Type D); and NWC panels reinforced with steel bar reinforcement and external bidirectional GFRP overlays on both faces (Type E). An additional three Type C panels were used as control specimens (CON). Each panel type was constructed with three thicknesses: 152 mm, 254 mm, and 356 mm. The panels were instrumented with strain gauges, and accelerometers; in addition, pressure sensors and high speed videos were employed during the blast events. Panel types C and E had the best performance, whereas panel type B did not perform well. Preliminary dynamic simulations show crack patterns similar to the experimental results.

Analysis Of Dynamic Dent Resistance Of Auto Body Panel

International Nuclear Information System (INIS)

Deolgaonkar, S. S.; Nandedkar, V. M.

2007-01-01

In automotive industry there is increasing demand for higher quality exterior panels, better functional properties and lower weight. The demand for weight reduction has led to thinner sheets, greater use of high strength steels and a change from steel to aluminum grades. This thickness reduction, which causes decrease in the dent resistance, promoted examination of the dent resistance against static and dynamic concentrated loads. This paper describes an investigation of the suitability of explicit dynamic FE analysis as a mean to determine the dynamic dent properties of the panel. This investigation is carried out on the body panel of utility vehicle and covers two parts, in first experimental analysis is carried out on developed test rig, which is interfaced with the computer. This test rig measures deflection with accuracy of .001mm. The experimental results are then compared with the simulation results, which is the second part. Simulation is carried with non-linear transient dynamic explicit analysis using Ansys -Ls Dyna. The experimental results show great accuracy with simulation results. The effect of change in thickness and geometry of the existing fender is then studied with help of simulation technique. By considering the best possible option overall weight of fender is reduced by 7.07 % by keeping the dent resistance of the panel constant

Programme of CABRI start-up measurements with the Zircaloy loop

International Nuclear Information System (INIS)

Kussmaul, G.; Rongier, P.

1981-06-01

After installation and operational tests of the CABRI Zircaloy loop, a start-up test programme will be carried out to determine the new coupling value between the driver core and the test pin and the reactivity dependent driver core energy release for transients from different power levels and modified injection rates. The purpose of the tests and the test programme itself are described in the report

Perceptions of television violence: effects of programme genre and type of violence on viewers' judgements of violent portrayals.

Science.gov (United States)

Gunter, B; Furnham, A

1984-06-01

This paper reports two studies which examined the mediating effects of programme genre and physical form of violence on viewers' perceptions of violent TV portrayals. In Expt 1, a panel of British viewers saw portrayals from five programme genres: British crime-drama series, US crime-drama series, westerns, science-fiction series and cartoons which feature either fights or shootings. In Expt. 2, the same viewers rated portrayals from British crime-drama and westerns which featured four types of violence, fist-fights, shootings, stabbings and explosions. All scenes were rated along eight unipolar scales. Panel members also completed four subscales of a personal hostility inventory. Results showed that both fictional setting and physical form had significant effects on viewers' perceptions of televised violence. British crime-drama portrayals, and portrayals that featured shootings and stabbings, were rated as most violent and disturbing. Also, there were strong differences between viewers with different self-reported propensities towards either verbal or physical aggression. More physically aggressive individuals tended to perceive physical unarmed violence as less violent than did more verbally aggressive types.

Opt-Out Panel Testing for HIV, Hepatitis B and Hepatitis C in an Urban Emergency Department: A Pilot Study.

Directory of Open Access Journals (Sweden)

Sarah O'Connell

Full Text Available Studies suggest 2 per 1000 people in Dublin are living with HIV, the level above which universal screening is advised. We aimed to assess the feasibility and acceptability of a universal opt-out HIV, Hepatitis B and Hepatitis C testing programme for Emergency Department patients and to describe the incidence and prevalence of blood-borne viruses in this population.An opt-out ED blood borne virus screening programme was piloted from March 2014 to January 2015. Patients undergoing blood sampling during routine clinical care were offered HIV 1&2 antibody/antigen assay, HBV surface antigen and HCV antibody tests. Linkage to care where necessary was co-ordinated by the study team. New diagnosis and prevalence rates were defined as the new cases per 1000 tested and number of positive tests per 1000 tested respectively.Over 45 weeks of testing, of 10,000 patient visits, 8,839 individual patient samples were available for analysis following removal of duplicates. A sustained target uptake of >50% was obtained after week 3. 97(1.09%, 44(0.49% and 447(5.05% HIV, Hepatitis B and Hepatitis C tests were positive respectively. Of these, 7(0.08%, 20(0.22% and 58(0.66% were new diagnoses of HIV, Hepatitis B and Hepatitis C respectively. The new diagnosis rate for HIV, Hepatitis B and Hepatitis C was 0.8, 2.26 and 6.5 per 1000 and study prevalence for HIV, Hepatitis B and Hepatitis C was 11.0, 5.0 and 50.5 per 1000 respectively.Opt-out blood borne viral screening was feasible and acceptable in an inner-city ED. Blood borne viral infections were prevalent in this population and newly diagnosed cases were diagnosed and linked to care. These results suggest widespread blood borne viral testing in differing clinical locations with differing population demographic risks may be warranted.

Development and Validation of a Serologic Test Panel for Detection of Powassan Virus Infection in U.S. Patients Residing in Regions Where Lyme Disease Is Endemic.

Science.gov (United States)

Thomm, Angela M; Schotthoefer, Anna M; Dupuis, Alan P; Kramer, Laura D; Frost, Holly M; Fritsche, Thomas R; Harrington, Yvette A; Knox, Konstance K; Kehl, Sue C

2018-01-01

Powassan virus (POWV) is an emerging tick-borne arbovirus presenting a public health threat in North America. POWV lineage II, also known as deer tick virus, is the strain of the virus most frequently found in Ixodes scapularis ticks and is implicated in most cases of POWV encephalitis in the United States. Currently, no commercial tests are available to detect POWV exposure in tick-borne disease (TBD) patients. We describe here the development and analytical validation of a serologic test panel to detect POWV infections. The panel uses an indirect enzyme immunoassay (EIA) to screen. EIA-positive samples reflex to a laboratory-developed, POWV-specific immunofluorescence assay (IFA). The analytical sensitivity of the test panel was 89%, and the limit of detection was a plaque reduction neutralization test (PRNT) titer of 1:20. The analytical specificity was 100% for the IgM assay and 65% for the IgG assay when heterologous-flavivirus-positive samples were tested. On samples collected from regions where Lyme disease is endemic, seroprevalence for POWV in TBD samples was 9.4% (10 of 106) versus 2% when tested with non-TBD samples (2 of 100, P = 0.034). No evidence of POWV infection was seen in samples collected from a region where Lyme disease was not endemic (0 of 22). This test panel provides a sensitive and specific platform for detecting a serologic response to POWV early in the course of infection when neutralizing antibodies may not be detectable. Combined with clinical history, the panel is an effective tool for identifying acute POWV infection. IMPORTANCE Approximately 100 cases of POWV disease were reported in the United States over the past 10 years. Most cases have occurred in the Northeast (52) and Great Lakes (45) regions (https://www.cdc.gov/powassan/statistics.html). The prevalence of POWV in ticks and mammals is increasing, and POWV poses an increasing threat in a greater geographical range. In areas of the Northeast and Midwest where Lyme disease is

Sound absorption study on acoustic panel from kapok fiber and egg tray

Science.gov (United States)

Kaamin, Masiri; Mahir, Nurul Syazwani Mohd; Kadir, Aslila Abd; Hamid, Nor Baizura; Mokhtar, Mardiha; Ngadiman, Norhayati

2017-12-01

Noise also known as a sound, especially one that is loud or unpleasant or that causes disruption. The level of noise can be reduced by using sound absorption panel. Currently, the market produces sound absorption panel, which use synthetic fibers that can cause harmful effects to the health of consumers. An awareness of using natural fibers from natural materials gets attention of some parties to use it as a sound absorbing material. Therefore, this study was conducted to investigate the potential of sound absorption panel using egg trays and kapok fibers. The test involved in this study was impedance tube test which aims to get sound absorption coefficient (SAC). The results showed that there was good sound absorption at low frequency from 0 Hz up to 900 Hz where the maximum absorption coefficient was 0.950 while the maximum absorption at high frequencies was 0.799. Through the noise reduction coefficient (NRC), the material produced NRC of 0.57 indicates that the materials are very absorbing. In addition, the reverberation room test was carried out to get the value of reverberation time (RT) in unit seconds. Overall this panel showed good results at low frequencies between 0 Hz up to 1500 Hz. In that range of frequency, the maximum reverberation time for the panel was 3.784 seconds compared to the maximum reverberation time for an empty room was 5.798 seconds. This study indicated that kapok fiber and egg tray as the material of absorption panel has a potential as environmental and cheap products in absorbing sound at low frequency.

Cavity Control and Panel Control Strategies in Double-Panel Structures for Transmitted Noise Reduction

NARCIS (Netherlands)

Ho, J.; Kalverboer, J.; Berkhoff, Arthur P.

2012-01-01

Investigation and comparisons of the cavity control and the panel control in a double-panel structure are presented in this paper. The double-panel structure, which comprises two panels with air in the gap, provides the advantages of low sound-transmission at high frequency, low heat-transmission

Energy Production and Regional Economic Growth in China: A More Comprehensive Analysis Using a Panel Model

Directory of Open Access Journals (Sweden)

Yaobin Liu

2013-03-01

Full Text Available China has witnessed a fast economic growth in the recent two decades. However, the heavy energy exploitation seems to show a negative relation to regional economic growth. Thus, the issue is whether the energy production is a curse or blessing for the regional economic growth in China. The present study deploys a comprehensive approach to rigorously prove the validity of a proposed panel data model that includes a second generation panel unit root test and panel cointegration and a spatial panel model. The results from the second generation panel unit root test and panel cointegration allowing for cross-sectional dependences show the differenced series are stationary and there exists a cointegration relationship among these variables for all sub-regions. The results from the spatial panel data model support the conjecture of the spatial dependent and show that there is a “resource curse” only for the Western region and Central region in China.

A European collaboration research programme to study and test large scale base isolated structures

International Nuclear Information System (INIS)

Renda, V.; Verzeletti, G.; Papa, L.

1995-01-01

The improvement of the technology of innovative anti-seismic mechanisms, as those for base isolation and energy dissipation, needs of testing capability for large scale models of structures integrated with these mechanisms. These kind experimental tests are of primary importance for the validation of design rules and the setting up of an advanced earthquake engineering for civil constructions of relevant interest. The Joint Research Centre of the European Commission offers the European Laboratory for Structural Assessment located at Ispra - Italy, as a focal point for an international european collaboration research programme to test large scale models of structure making use of innovative anti-seismic mechanisms. A collaboration contract, opened to other future contributions, has been signed with the national italian working group on seismic isolation (Gruppo di Lavoro sull's Isolamento Sismico GLIS) which includes the national research centre ENEA, the national electricity board ENEL, the industrial research centre ISMES and producer of isolators ALGA. (author). 3 figs

Panel Resonance Control and Cavity Control in Double-Panel Structures for Active Noise Reduction

NARCIS (Netherlands)

Ho, J.; Berkhoff, Arthur P.

2011-01-01

An analytical and experimental investigation of panel resonance control and cavity control in a double-panel structure is presented in this paper. The double-panel structure, which consists of two panels with air in the gap, is widely adopted in many applications such as aerospace due to its low

Failure of uniformly compression loaded debond damaged sandwich panels — An experimental and numerical study

DEFF Research Database (Denmark)

Moslemian, Ramin; Quispitupa, Amilcar; Berggreen, Christian

2012-01-01

This paper deals with the failure of compression-loaded sandwich panels with an implanted circular face/core debond. Uniform compression tests were conducted on intact sandwich panels with three different types of core material (H130, H250 and PMI) and on similar panels with circular face...

Clinical application of multigene panels: challenges of next generation counseling and cancer risk management

Directory of Open Access Journals (Sweden)

Thomas Paul Slavin

2015-09-01

Full Text Available Background: Multigene panels can be a cost- and time-effective alternative to sequentially testing multiple genes, especially with a mixed family cancer phenotype. However, moving beyond our single-gene testing paradigm has unveiled many new challenges to the clinician. The purpose of this article is to familiarize the reader with some of the challenges, as well as potential opportunities, of expanded hereditary cancer panel testing. Methods: We include results from 348 commercial multigene panel tests ordered from January 1, 2014, through October 1, 2014, by clinicians associated with the City of Hope’s Clinical Cancer Genetics Community of Practice. We also discuss specific challenging cases that arose during this period involving abnormalities in the genes: CDH1, TP53, PMS2, PALB2, CHEK2, NBN, and RAD51C. Results: If historically high risk genes only were included in the panels (BRCA1, BRCA2, MSH6, PMS2, TP53, APC, CDH1, the results would have been positive only 6.2% of the time, instead of 17%. Results returned with variants of uncertain significance (VUS 42% of the time. Conclusion: These figures and cases stress the importance of adequate pretest counseling in anticipation of higher percentages of positive, VUS, unexpected, and ambiguous test results. Test result ambiguity can be limited by the use of phenotype specific panels; if found, multiple resources (the literature, reference laboratory, colleagues, national experts, and research efforts can be accessed to better clarify counseling and management for the patient and family. For pathogenic variants in low and moderate risk genes, empiric risk modeling based on the patient’s personal and family history of cancer may supersede gene-specific risk. Commercial laboratory and patient contributions to public databases and research efforts will be needed to better classify variants and reduce clinical ambiguity of multigene panels.

A Longitudinal Investigation of the Preservice Science Teachers' Beliefs about Science Teaching during a Science Teacher Training Programme

Science.gov (United States)

Buldur, Serkan

2017-01-01

The aim of this longitudinal study was to investigate the changes in preservice science teachers' beliefs about science teaching during a science teacher training programme. The study was designed as a panel study, and the data were collected from the same participants at the end of each academic year during a four-year period. The participants…

The Constraints of Ghanaian Polytechnics in Adopting Competency Based Training (CBT): The Case of a Pilot-Tested Programme

Science.gov (United States)

Alhassan, Munkaila; Habib, Abdallah Mohammed

2016-01-01

Polytechnics in Ghana view Competency Based Training (CBT) as a major intervention to the perennial constraints confronting its education and training. On the basis of this, and by government policy, a pilot programme of CBT was instituted in all the 10 polytechnics of Ghana, and was pilot tested in, at least, one department. Agricultural…

Vacuum Insulation Panels - Study on VIP-components and panels for service life prediction of VIP in building applications (Subtask A)

Energy Technology Data Exchange (ETDEWEB)

Simmler, H.; Brunner, S. [Swiss Federal Laboratories for Materials Testing and Research (EMPA), Duebendorf (Switzerland); Heinemann, U.; Schwab, H. [Bavarian Centre for Applied Energy Research (ZAE Bayern), Garching (Germany); Kumaran, K.; Mukhopadhyaya, P. [National Research Council, Institute for Research in Construction (NRC-IRC), Ottawa (Canada); Quenard, D.; Sallee, H. [Scientific and Technical Centre for Construction (CSTB), Marne la Vallee (France); Noller, K.; Kuecuekpinar-Niarchos, E.; Stramm, C. [Fraunhofer Institute for Process Engineering and Packaging (IVV), Freising (Germany); Tenpierik, M.; Cauberg, H. [Technical University of Delft, Delft (Netherlands); Erb, M. [Dr. Eicher und Pauli AG (Switzerland)

2005-09-15

This comprehensive paper takes a look at the properties of vacuum insulation panels (VIP) and was presented as a contribution to the IEA's ECBCS (Energy Conservation in Buildings and Community Systems) Annex 39. The various institutions in Switzerland, Germany, Canada, France, Sweden and the Netherlands participating in the task and their activities are listed. The paper describes the concept of vacuum insulation for buildings and examines the physics involved and core materials that can be used. The physical, mechanical and thermal properties of the core materials are examined and the requirements placed on the envelope of the panels are looked at. Tests made on materials as well as on the complete vacuum insulation panels are described in detail. The results obtained are presented and reviewed. Service-life and quality assurance aspects are also discussed. A comprehensive appendix completes the report.

Investigation on Wall Panel Sandwiched With Lightweight Concrete

Science.gov (United States)

Lakshmikandhan, K. N.; Harshavardhan, B. S.; Prabakar, J.; Saibabu, S.

2017-08-01

The rapid population growth and urbanization have made a massive demand for the shelter and construction materials. Masonry walls are the major component in the housing sector and it has brittle characteristics and exhibit poor performance against the uncertain loads. Further, the structure requires heavier sections for carrying the dead weight of masonry walls. The present investigations are carried out to develop a simple, lightweight and cost effective technology for replacing the existing wall systems. The lightweight concrete is developed for the construction of sandwich wall panel. The EPS (Expanded Polystyrene) beads of 3 mm diameter size are mixed with concrete and developed a lightweight concrete with a density 9 kN/m3. The lightweight sandwich panel is cast with a lightweight concrete inner core and ferrocement outer skins. This lightweight wall panel is tested for in-plane compression loading. A nonlinear finite element analysis with damaged plasticity model is carried out with both material and geometrical nonlinearities. The experimental and analytical results were compared. The finite element study predicted the ultimate load carrying capacity of the sandwich panel with reasonable accuracy. The present study showed that the lightweight concrete is well suitable for the lightweight sandwich wall panels.

Performance comparison between silicon solar panel and dye-sensitized solar panel in Malaysia

Science.gov (United States)

Hamed, N. K. A.; Ahmad, M. K.; Urus, N. S. T.; Mohamad, F.; Nafarizal, N.; Ahmad, N.; Soon, C. F.; Ameruddin, A. S.; Faridah, A. B.; Shimomura, M.; Murakami, K.

2017-09-01

In carrying out experimental research in performance between silicon solar panel and dye-sensitive solar panel, we have been developing a device and a system. This system has been developed consisting of controllers, hardware and software. This system is capable to get most of the input sources. If only need to change the main circuit and coding for a different source input value. This device is able to get the ambient temperature, surface temperature, surrounding humidity, voltage with load, current with load, voltage without load and current without load and save the data into external memory. This device is able to withstand the heat and rain as it was fabricated in a waterproof box. This experiment was conducted to examine the performance of both the solar panels which are capable to maintain their stability and performance. A conclusion based on data populated, the distribution of data for dye-sensitized solar panel is much better than silicon solar panel as dye-sensitized solar panel is very sensitive to heat and not depend only on midday where is that is the maximum ambient temperature for both solar panel as silicon solar panel only can give maximum and high output only when midday.

Analysis of 3-panel and 4-panel microscale ionization sources

International Nuclear Information System (INIS)

Natarajan, Srividya; Parker, Charles B.; Glass, Jeffrey T.; Piascik, Jeffrey R.; Gilchrist, Kristin H.; Stoner, Brian R.

2010-01-01

Two designs of a microscale electron ionization (EI) source are analyzed herein: a 3-panel design and a 4-panel design. Devices were fabricated using microelectromechanical systems technology. Field emission from carbon nanotube provided the electrons for the EI source. Ion currents were measured for helium, nitrogen, and xenon at pressures ranging from 10 -4 to 0.1 Torr. A comparison of the performance of both designs is presented. The 4-panel microion source showed a 10x improvement in performance compared to the 3-panel device. An analysis of the various factors affecting the performance of the microion sources is also presented. SIMION, an electron and ion optics software, was coupled with experimental measurements to analyze the ion current results. The electron current contributing to ionization and the ion collection efficiency are believed to be the primary factors responsible for the higher efficiency of the 4-panel microion source. Other improvements in device design that could lead to higher ion source efficiency in the future are also discussed. These microscale ion sources are expected to find application as stand alone ion sources as well as in miniature mass spectrometers.

Ottawa Panel Evidence-Based Clinical Practice Guidelines for Patient Education Programmes in the Management of Osteoarthritis

Science.gov (United States)

Health Education Journal, 2011

2011-01-01

Objective: The purpose of this study was to develop guidelines and recommendations on patient education programmes of any type, targeted specially to individuals with OA and which were designed to improve the clinical effectiveness of managing OA. Methods: The Ottawa Methods Group contacted specialized organizations that focus on management for…

Perceptions of growth monitoring and promotion among an international panel of district medical officers.

Science.gov (United States)

Roberfroid, Dominique; Lefèvre, Pierre; Hoerée, Tom; Kolsteren, Patrick

2005-09-01

The growth chart has been proposed as an educational tool to make the child's growth visible to both health workers and caregivers and to enhance communication between them. In the case of growth faltering, this would trigger timely corrective measures. Although the relevance of growth monitoring and promotion (GMP) has often been questioned in the literature, opinions of District Medical Officers responsible for local implementation of GMP are unknown. The aim of this qualitative research was to explore the perceptions and difficulties of an international panel of District Medical Officers regarding GMP. As an exploratory study, in-depth interviews of an international panel of District Medical Officers (n=19) were conducted. Data were coded using the QSR Nudist 5.0 software. A discrepancy between intended purposes and practice of GMP was detected at two levels. First, lack of participation of care-givers was reported. Second, the District Medical Officers expressed a restrictive interpretation of the concept of growth monitoring. The communication with parents was never reported as a means or a result of GMP, neither as an evaluation criterion of programme efficiency. The growth chart was mainly considered a tool intended to be used by health services for the purpose of diagnosis. This two-fold discrepancy between the intention of international policy-planners and practice of local programme implementers could be a crucial factor affecting the performance of GMP. More emphasis should be put on social communication and involvement of caregivers.

Assessment of Physical and Mechanical Properties of Cement Panel Influenced by Treated and Untreated Coconut Fiber Addition

Science.gov (United States)

Abdullah, Alida; Jamaludin, Shamsul Baharin; Anwar, Mohamed Iylia; Noor, Mazlee Mohd; Hussin, Kamarudin

This project was conducted to produce a cement panel with the addition of treated and untreated coconut fiber in cement panel. Coconut fiber was added to replace coarse aggregate (sand) in this cement panel. In this project, the ratios used to design the mixture were 1:1:0, 1:0.97:0.03, 1:0.94:0.06, 1:0.91:0.09 (cement: sand: coconut fiber). The water cement ratio was constant at 0.55. The sizes of sample tested were, 160 mm x 40 mm x 40 mm for compression test, and 100 mm x 100 mm x 40 mm for density, moisture content and water absorption tests. After curing samples for 28 days, it was found that the addition of coconut fiber, further increase in compressive strength of cement panel with untreated coconut fiber. Moisture content of cement panel with treated coconut fiber increased with increasing content of coconut fiber whereas water absorption of cement panel with untreated coconut fiber increased with increasing content of coconut fiber. The density of cement panel decreased with the addition of untreated and treated coconut fiber.

Y2K: effects on pacemaker and implantable defibrillator programmers.

Science.gov (United States)

Flynn, D P; Daubert, J P; Huang, D T; Ocampo, C M; O'Gorman, E

1999-01-01

All permanent pacemakers and implantable defibrillators (PPM/ICDs) will continue to function as programmed without regard to the date in the year 2000 (Y2K). All manufacturers contacted reassured us that some of these devices incorporate a day/year clock in the circuitry; however, these are not involved in sensing or delivering programmed therapy. Some manufacturers' device programmers will roll over to the year 2000 without any problems at all, whereas others may have difficulty with date and time stamping on printed reports. We tested 14 different types of PPM/ICD programmers for Y2K compliance using 8 tests. Five of the 14 models passed each test and were labeled at our institution with a green "Y2K" sticker to identify them as Y2K compatible and needing no special attention after December 31, 1999. The most common test failed was the ability to roll the date forward from December 31, 1999, with the programmer power off. Organizations should consider testing and replacing noncompliant device programmers or placing a red sticker with "Y2K" crossed out on noncompliant pieces. The red sticker alerts the advanced practice nurse or physician to the need to confirm the appropriate date and time in the programmer after startup in the year 2000 and before interrogating or programming any PPM/ICD, to avoid inappropriate date and time stamping on printed reports from that programmer.

The WHO AFRO external quality assessment programme (EQAP: Linking laboratory networks through EQA programmes

Directory of Open Access Journals (Sweden)

Debrah I. Boeras

2016-10-01

Full Text Available External Quality Assessment (EQA surveys performed by the World Health Organization Regional Office for Africa (WHO AFRO revealed the need for the strengthening of publichealth microbiology laboratories, particularly for testing of epidemic-prone diseases in theAfrican Region. These surveys revealed common issues such as supply chain managementskilled personnel, logistical support and overall lack of quality standards. For sustainableimprovements to health systems as well as global health security, deficiencies identified needto be actively corrected through robust quality assurance programmes and implementation oflaboratory quality management systems. Given all the pathogens of public health importance, an external quality assessment programmewith a focus on vaccine-preventable diseases and emerging and re-emerging dangerouspathogens is important, and should not be stand-alone, but integrated within laboratorynetworks as seen in polio, measles, yellow fever and rubella. In 2015, WHO AFRO collaborated with the US Centers for Disease Control and Preventionthe London School of Hygiene & Tropical Medicine and partners in a series of consultationswith countries and national and regional EQA providers for the development of qualityassurance models to support HIV point-of-care testing and monitoring. These consultationsrevealed similar challenges as seen in the WHO AFRO surveys. WHO AFRO brought forthits experience in implementing quality standards for health programmes, and also openeddiscussions on how lessons learned through such established programmes can be utilised tosupporting and strengthening the introduction of early infant diagnosis of HIV and viralload point-of-care testing. An optimised external quality assessment programme will impact the ability of countries tomeet core capacities, providing improved quality management systems, improving theconfidence of diagnostic network services in Africa, and including capacities to detect eventsof

Genomic sequencing in cystic fibrosis newborn screening: what works best, two-tier predefined CFTR mutation panels or second-tier CFTR panel followed by third-tier sequencing?

Science.gov (United States)

Currier, Robert J; Sciortino, Stan; Liu, Ruiling; Bishop, Tracey; Alikhani Koupaei, Rasoul; Feuchtbaum, Lisa

2017-10-01

PurposeThe purpose of this study was to model the performance of several known two-tier, predefined mutation panels and three-tier algorithms for cystic fibrosis (CF) screening utilizing the ethnically diverse California population.MethodsThe cystic fibrosis transmembrane conductance regulator (CFTR) mutations identified among the 317 CF cases in California screened between 12 August 2008 and 18 December 2012 were used to compare the expected CF detection rates for several two- and three-tier screening approaches, including the current California approach, which consists of a population-specific 40-mutation panel followed by third-tier sequencing when indicated.ResultsThe data show that the strategy of using third-tier sequencing improves CF detection following an initial elevated immunoreactive trypsinogen and detection of only one mutation on a second-tier panel.ConclusionIn a diverse population, the use of a second-tier panel followed by third-tier CFTR gene sequencing provides a better detection rate for CF, compared with the use of a second-tier approach alone, and is an effective way to minimize the referrals of CF carriers for sweat testing. Restricting screening to a second-tier testing to predefined mutation panels, even broad ones, results in some missed CF cases and demonstrates the limited utility of this approach in states that have diverse multiethnic populations.

TECHNICAL DESIGN NOTE: Picosecond resolution programmable delay line

Science.gov (United States)

Suchenek, Mariusz

2009-11-01

The note presents implementation of a programmable delay line for digital signals. The tested circuit has a subnanosecond delay range programmable with a resolution of picoseconds. Implementation of the circuit was based on low-cost components, easily available on the market.

REINFORCED COMPOSITE PANEL

DEFF Research Database (Denmark)

2003-01-01

A composite panel having front and back faces, the panel comprising facing reinforcement, backing reinforcement and matrix material binding to the facing and backing reinforcements, the facing and backing reinforcements each independently comprising one or more reinforcing sheets, the facing rein...... by matrix material, the facing and backing reinforcements being interconnected to resist out-of-plane relative movement. The reinforced composite panel is useful as a barrier element for shielding structures, equipment and personnel from blast and/or ballistic impact damage....

Towards subsidized malaria rapid diagnostic tests. Lessons learned from programmes to subsidise artemisinin-based combination therapies in the private sector: a review.

Science.gov (United States)

Lussiana, Cristina

2016-09-01

The idea of a private sector subsidy programme of artemisinin-based combination therapies (ACTs) was first proposed in 2004. Since then, several countries around the world have hosted pilot projects or programmes on subsidized ACTs and/or the Affordable Medicines Facility-malaria programme (AMFm). Overall the private sector subsidy programmes of ACTs have been effective in increasing availability of ACTs in the private sector and driving down average prices but struggled to crowd out antimalarial monotherapies. The results obtained from this ambitious strategy should inform policy makers in the designing of future interventions aimed to control malaria morbidity and mortality. Among the interventions recently proposed, a subsidy of rapid diagnostic tests (RDTs) in the private sector has been recommended by governments and international donors to cope with over-treatment with ACTs and to delay the emergence of resistance to artemisinin. In order to improve the cost-effectiveness of co-paid RDTs, we should build on the lessons we learned from almost 10 years of private sector subsidy programmes of ACTs in malaria-endemic countries. © The Author 2015. Published by Oxford University Press in association with The London School of Hygiene and Tropical Medicine.

Literature Review of Shear Performance of Light-weight Steel Framing Wall Panels

Science.gov (United States)

Zhang, Zhuangnan; Liu, Shen; Liu, Hong

2018-03-01

In this paper, a comprehensive review of light-weight steel framing wall panels was carried out. The structure and force characteristics of light-weight steel framing wall panels were introduced. The testing and theoretical research results on the shear behaviour of light-weight steel framing wall panels were summarized in the domestic and foreign. And combined with the existing standards in China, the author's views and ideas are put forward to the problems in the research field of this kind of structural system.

Rational Design of Composite Panels

DEFF Research Database (Denmark)

Riber, Hans Jørgen

1996-01-01

A non-linear structural model for composite panels is presented. The non-linear terms in the lateral displacements are modelled as an additional set of lateral loads acting on the panel. Hence the solution is reduced to that of an equivalent panel with small displacements In order to treat sandwich...... Norske Veritas', DNV, building rules concerning high-speed light craft, in which the panel scantlings are often restricted by a maximum lateral deflection connected with the panel span....

Review of neonatal screening programme for phenylketonuria.

Science.gov (United States)

Smith, I; Cook, B; Beasley, M

1991-01-01

OBJECTIVE--To review the neonatal screening programme during 1984-8. DESIGN--Analysis of data from screening laboratories and paediatricians. SUBJECTS--All live births in United Kingdom. MAIN OUTCOME MEASURES--Structure of programme; number of infants tested and number with phenylketonuria; number of infants missed; ages at testing and treatment. RESULTS--The proportion of infants tested approached 100%. The incidence of phenylketonuria was 11.7/100,000 births (445 subjects): 273 had classic phenylketonuria and three had defects of cofactor metabolism. One child with phenylketonuria was known to have been missed compared with three in 1979-83 and six in 1974-8. Seven subjects had been missed over the 15 years due to negative test results. All seven had been tested with the bacterial inhibition assay, although only 53% of infants had been so tested; the difference between the expected and observed proportion was significant (Fisher's exact test, p = 0.017). Eleven infants with classic phenylketonuria were not tested by 14 days of age and 23 (8%) did not start treatment until after 20 days, an improvement compared with 36 (15%) in 1979-83. There were, however, wide regional variations (0% to 27% treated after 20 days). CONCLUSION--The screening programme achieves high coverage and effectiveness, although some children are still missed. A national practice for screening may help reduce regional variations. PMID:1912773

Panel Resource Management (PRM) Implementation and Effects within Safety Review Panel Settings and Dynamics

Science.gov (United States)

Taylor, Robert W.; Nash, Sally K.

2007-01-01

While technical training and advanced degree's assure proficiency at specific tasks within engineering disciplines, they fail to address the potential for communication breakdown and decision making errors familiar to multicultural environments where language barriers, intimidating personalities and interdisciplinary misconceptions exist. In an effort to minimize these pitfalls to effective panel review, NASA's lead safety engineers to the ISS Safety Review Panel (SRP), and Payload Safety Review Panel (PSRP) initiated training with their engineers, in conjunction with the panel chairs, and began a Panel Resource Management (PRM) program. The intent of this program focuses on the ability to reduce the barriers inhibiting effective participation from all panel attendees by bolstering participants confidence levels through increased communication skills, situational awareness, debriefing, and a better technical understanding of requirements and systems.

Comparison of performance and quantitative descriptive analysis sensory profiling and its relationship to consumer liking between the artisanal cheese producers panel and the descriptive trained panel.

Science.gov (United States)

Ramírez-Rivera, Emmanuel de Jesús; Díaz-Rivera, Pablo; Guadalupe Ramón-Canul, Lorena; Juárez-Barrientos, José Manuel; Rodríguez-Miranda, Jesús; Herman-Lara, Erasmo; Prinyawiwatkul, Witoon; Herrera-Corredor, José Andrés

2018-04-25

The aim of this research was to compare the performance and sensory profiling of a panel of artisanal cheese producers against a trained panel and their relationship to consumer liking (external preference mapping). Performance was analyzed statistically at an individual level using the Fisher's test (F) for discrimination, the mean square error for repeatability, and Manhattan plots for visualizing the intra-panel homogeneity. At group level, performance was evaluated using ANOVA. External preference mapping technique was applied to determine the efficiency of each sensory profile. Results showed that the producers panel was discriminant and repetitive with a performance similar to that of the trained panel. Manhattan plots showed that the performance of artisanal cheese producers was more homogeneous than trained panelists. The correlation between sensory profiles (Rv = 0.95) demonstrated similarities in the generation and use of sensory profiles. The external preference maps generated individually with the profiles of each panel were also similar. Recruiting individuals familiar with the production of artisanal cheeses as panelists is a viable strategy for sensory characterization of artisanal cheeses within their context of origin because their results were similar to those from the trained panel and can be correlated with consumer liking data. Copyright © 2018 American Dairy Science Association. Published by Elsevier Inc. All rights reserved.

Solar panel cleaning robot

Science.gov (United States)

Nalladhimmu, Pavan Kumar Reddy; Priyadarshini, S.

2018-04-01

As the demand of electricity is increasing, there is need to using the renewable sources to produce the energy at present of power shortage, the use of solar energy could be beneficial to great extent and easy to get the maximum efficiency. There is an urgent in improving the efficiency of solar power generation. Current solar panels setups take a major power loss when unwanted obstructions cover the surface of the panels. To make solar energy more efficiency of solar array systems must be maximized efficiency evaluation of PV panels, that has been discussed with particular attention to the presence of dust on the efficiency of the PV panels have been highlighted. This paper gives the how the solar panel cleaning system works and designing of the cleaning system.

Development of a Two-Dimensional Tracker with Plasma Panel Detector

CERN Document Server

AUTHOR|(CDS)2233132

Plasma panel sensors are micropattern gaseous radiation detectors which are based on the technology of plasma display panels. This thesis summarizes the research that had been done on commercially available plasma display panels that were converted to plasma panel sensor prototypes and describes the construction of a two-dimensional tracker consisting of four of those prototypes, with one-dimensional readout on each, used to detect tracks of cosmic muons. A large amount of 2-point as well as 3 and 4-point tracks were detected. Qualitative analyses as well as Pearson’s χ2 tests are performed on the track angular distribution and on a histogram of the linearity measure of 3-point tracks to reject the hypothesis that these tracks result from completely random panel hits. Some RF noise effects contributing to false positives are ruled out, while it is shown that other effects can be ruled out only with a high-intensity minimum ionizing particle source. A significant part of the tracker construction was the dev...

Lightweight, Thermally Insulating Structural Panels

Science.gov (United States)

Eisen, Howard J.; Hickey, Gregory; Wen, Liang-Chi; Layman, William E.; Rainen, Richard A.; Birur, Gajanana C.

1996-01-01

Lightweight, thermally insulating panels that also serve as structural members developed. Honeycomb-core panel filled with low-thermal-conductivity, opacified silica aerogel preventing convection and minimizes internal radiation. Copper coating on face sheets reduces radiation. Overall thermal conductivities of panels smaller than state-of-art commercial non-structurally-supporting foam and fibrous insulations. On Earth, panels suitable for use in low-air-pressure environments in which lightweight, compact, structurally supporting insulation needed; for example, aboard high-altitude aircraft or in partially evacuated panels in refrigerators.

Evaluation of photovoltaic panel temperature in realistic scenarios

International Nuclear Information System (INIS)

Du, Yanping; Fell, Christopher J.; Duck, Benjamin; Chen, Dong; Liffman, Kurt; Zhang, Yinan; Gu, Min; Zhu, Yonggang

2016-01-01

Highlights: • The developed realistic model captures more reasonably the thermal response and hysteresis effects. • The predicted panel temperature is as high as 60 °C under a solar irradiance of 1000 W/m"2 in no-wind weather. • In realistic scenarios, the thermal response normally takes 50–250 s. • The actual heating effect may cause a photoelectric efficiency drop of 2.9–9.0%. - Abstract: Photovoltaic (PV) panel temperature was evaluated by developing theoretical models that are feasible to be used in realistic scenarios. Effects of solar irradiance, wind speed and ambient temperature on the PV panel temperature were studied. The parametric study shows significant influence of solar irradiance and wind speed on the PV panel temperature. With an increase of ambient temperature, the temperature rise of solar cells is reduced. The characteristics of panel temperature in realistic scenarios were analyzed. In steady weather conditions, the thermal response time of a solar cell with a Si thickness of 100–500 μm is around 50–250 s. While in realistic scenarios, the panel temperature variation in a day is different from that in steady weather conditions due to the effect of thermal hysteresis. The heating effect on the photovoltaic efficiency was assessed based on real-time temperature measurement of solar cells in realistic weather conditions. For solar cells with a temperature coefficient in the range of −0.21%∼−0.50%, the current field tests indicated an approximate efficiency loss between 2.9% and 9.0%.

PERBANDINGAN UNJUK KERJA ANTARA PANEL SEL SURYA BERPENJEJAK DENGAN PANEL SEL SURYA DIAM

OpenAIRE

Syafaruddin Ch

2010-01-01

The ability to produce electrical energy at Solar Power Plant  is highly dependent on the magnitude and duration of sun exposure on the solar cell panels. The movement of the sun from east to west that periodicity in every day is a problem at  the  optimization generation of electricity at  Solar Power Plant   if using solar panel that motionless. This is because the solar cell panel can not catch the maximum sun exposure. To solve the above problem then designed a solar cell panel  tracker...

Evaluation of Random Blinded Re-Checking of AFB Slides under Revised National Tuberculosis Control Programme in Solapur District

Directory of Open Access Journals (Sweden)

Swapnil Vishnu Lale

2013-01-01

Full Text Available Background: One of the important components of revised national tuberculosis control programme is ‘Good quality diagnosis, primarily by sputum smear microscopy’. All efforts are made to ensure that the designated microscopy centers function at optimal level. The process of ‘Random Blinded Re-Checking’ (RBRCof Acid Fast Bacillus slides is built in the programme. Objectives: To study the relationship of different types of errors detected in RBRC with respect to time, place and cost. To study the stability and capability of the process of RBRC. Methods: Analysis of secondary data of external quality assessment of Solapur district since January 2006 is supplemented by direct implementation of the programme since April 2011 till date. Data analysis is done using statistical software Minitab version 16.Results: Since January 2006 to May 2012;42191 slides were re-checked in 77 RBRC sessions at District Tuberculosis Center, Solapur.Different types of 69 errors were detected. Onsite evaluation and panel testing did not show any discordance. Barshi and Mangalwedha Tuberculosis Units (TU showed significantly higher number of errors as compared to Karmala TU. (P<0.002 Weighted Pareto Chart revealed that the costliest form of errors is high false negatives and low false negatives. Conclusion:Detection of errors in RBRC sessions follows Poisson distribution. The process of RBRC is found to be in control and capable of achieving the desired target of detection of errors.

The steam generator programme of PISC III

International Nuclear Information System (INIS)

Birac, C.; Herkenrath, H.

1990-12-01

The PISC III Actions are intended to extend the results and methodologies of the previous PISC excercises, i.e. the validation of the capabilities of the various examination techniques when used on real defects in real components under real conditions of inspection. Being aware of the important safety role that steam generator tubes play as barrier between primary and secondary cooling system and of the industrial problems that the degradation of these tubes can create, the PISC III Management Board agreed to include in the PISC III Programme a special Action on Steam Generator Tubes Testing (SGT). It was decided to organize the programme in three phases, including Round Robin Tests (RRT): - capability tests on loose tubes, - capability tests on transportable mock-ups, - reliability tests on fixed mock-ups including some interesting SURRY tubes

Testing measurement invariance of the Learning Programme Management and Evaluation scale across academic achievement

Directory of Open Access Journals (Sweden)

Maelekanyo C. Mulaudzi

2016-10-01

Full Text Available Orientation: Measurement invariance is one of the most precarious aspects of the scale development process without which the interpretation of research findings on population subgroups may be ambiguous and even invalid. Besides tests for validity and reliability, measurement invariance represents the hallmark for psychometric compliance of a new measuring instrument and provides the basis for inference of research findings across a range of relevant population sub-groups. Research purpose: This study tested the measurement invariance of a Learning Programme Management and Evaluation (LPME scale across levels of academic achievement. Motivation for the study: It is important for any researcher involved in new scale development to ensure that the measurement instrument and its underlying constructs have proper structural alignment and that they both have the same level of meaning and significance across comparable heterogeneous groups. Research design, approach and method: A quantitative, non-experimental, cross-sectional survey design was used, and data were obtained from 369 participants who were selected from three public sector organisations using a probabilistic simple random sampling technique. The Statistical Package for Social Sciences and Analysis of Moment Structures software (versions 21.0.0 were used to analyse the data. Main findings: The findings show that all the four invariance models tested have achieved acceptable goodness-of-fit indices. Furthermore, the findings show that the factorial structure of the LPME scale and the meaning of its underlying constructs are invariant across different levels of academic achievement for human resource development (HRD practitioners and learners or apprentices involved in occupational learning programmes. Practical implications: The findings of this study suggest practical implications for HRD scholars as they are enabled to make informed decisional balance comparisons involving educational

Panel data analysis using EViews

CERN Document Server

Agung, I Gusti Ngurah

2013-01-01

A comprehensive and accessible guide to panel data analysis using EViews software This book explores the use of EViews software in creating panel data analysis using appropriate empirical models and real datasets. Guidance is given on developing alternative descriptive statistical summaries for evaluation and providing policy analysis based on pool panel data. Various alternative models based on panel data are explored, including univariate general linear models, fixed effect models and causal models, and guidance on the advantages and disadvantages of each one is given. Panel Data Analysis

Plans for Testing the NREL Unsteady Aerodynamics Experiment 10m Diameter HAWT in the NASA Ames Wind Tunnel: Minutes, Conclusions, and Revised Text Matrix from the 1st Science Panel Meeting

Energy Technology Data Exchange (ETDEWEB)

Simms, D.; Schreck, S.; Hand, M.; Fingersh, L.; Cotrell, J.; Pierce, K.; Robinson, M.

2000-08-28

Currently, the NREL Unsteady Aerodynamics Experiment (UAE) research turbine is scheduled to enter the NASA Ames 80-ft x 120-ft wind tunnel in early 2000. To prepare for this 3-week test, a Science Panel meeting was convened at the National Wind Technology Center (NWTC) in October 1998. During this meeting, the Science Panel and representatives from the wind energy community provided numerous detailed recommendations regarding test activities and priorities. The Unsteady Aerodynamics team of the NWTC condensed this guidance and drafted a detailed test plan. This test plan represents an attempt to balance diverse recommendations received from the Science Panel meeting, while taking into account multiple constraints imposed by the UAE research turbine, the NASA Ames 80-ft x 120-ft wind tunnel, and other sources. The NREL-NASA Ames wind tunnel tests will primarily be focused on obtaining rotating blade pressure data. NREL has been making these types of measurements since 1987 and has considerable experience in doing so. The purpose of this wind tunnel test is to acquire accurate quantitative aerodynamic and structural measurements, on a wind turbine that is geometrically and dynamically representative of full-scale machines, in an environment free from pronounced inflow anomalies. These data will be exploited to develop and validate enhanced engineering models for designing and analyzing advanced wind energy machines.

RECIPANEL: RECYCLED PAPER PANELS

Directory of Open Access Journals (Sweden)

HERNÁN CAÑOLA

2012-01-01

Full Text Available En este artículo se estudia la fabricación y el comportamiento mecánico de paneles a base de papel reciclado. El objetivo principal del proyecto es producir un prototipo de panel que emplee elementos provenientes de residuos sólidos (papel periódico y de un material conglomerante (cemento Portland blanco. El panel debe ser económico, debe tener buenas propiedades mecánicas y debe tener dimensiones comerciales para su uso en muros tabiques y en cielos falsos en la industria de la construcción. El Recipanel es un panel no estructural a base de papel reciclado. El Recipanel cumple las normas colombianas en lo relativo a los paneles de uso no estructural y presenta además unas excelentes características mecánicas.

Fire Resistance of Large-Scale Cross-Laminated Timber Panels

Science.gov (United States)

Henek, Vladan; Venkrbec, Václav; Novotný, Miloslav

2017-12-01

Wooden structures are increasingly being used in the construction of residential buildings. A common and often published reason to avoid wooden structures is their insufficient fire resistance, which reduces bearing capacity. For this reason, composite sandwich structures began to be designed to eliminate this drawback, as well as others. Recently, however, the trend is for a return to the original, wood-only variant and a search is underway for new technical means of improving the properties of such structures. Many timber structure technologies are known, but structures made from cross-laminated timber (CLT) panels have been used very often in recent years. CLT panels, also known as X-LAM, are currently gaining popularity in Europe. In the case of CLT panels composed of several layers of boards, they can be said to offer a certain advantage in that after the surface layer of a board has burnt and the subsurface layer has dried, oxygen is not drawn to the unburned wood for further combustion and thus the burning process ceases. CLT panels do not need to be specially modified or coated with fire resistant materials, although they are usually lined with gypsum-fibre fire resistant boards due to guidelines set out in the relevant standards. This paper presents a new method for the assessment of load-bearing perimeter walls fabricated from CLT panels without the use of an inner fire-retardant lining to ensure fire resistance at the level required by European standards (i.e. those harmonized for the Czech construction industry). The calculations were verified through laboratory tests which show that better parameters can be achieved during the classification of structures from the fire resistance point of view. The aim of the article is to utilize the results of assessment and testing by an accredited laboratory in order to demonstrate the possibilities of using CLT panels for the construction of multistorey as well as multi-purpose buildings in the Czech Republic.

Assessment of an outreach street-based HIV rapid testing programme as a strategy to promote early diagnosis: a comparison with two surveillance systems in Spain, 2008-2011.

Science.gov (United States)

Belza, M J; Hoyos, J; Fernández-Balbuena, S; Diaz, A; Bravo, M J; de la Fuente, L

2015-04-09

We assess the added value of a multisite, street-based HIV rapid testing programme by comparing its results to pre-existing services and assessing its potential to reduce ongoing transmission. Between 2008 and 2011, 8,923 individuals underwent testing. We compare outcomes with those of a network of 20 sexually transmitted infections (STI)/HIV clinics (EPI-VIH) and the Spanish National HIV Surveillance System (SNHSS); evaluate whether good visibility prompts testing and assess whether it reaches under-tested populations. 89.2% of the new infections were in men who have sex with men (MSM) vs 78.0% in EPI-VIH and 56.0% in SNHSS. 83.6% of the MSM were linked to care and 20.9% had VIH. 56.5% of the HIV-positive MSM tested because they happened to see the programme, 18.4% were previously untested and 26.3% had their last test ≥2 years ago. The programme provided linkage to care and early diagnosis mainly to MSM but attendees presented a lower HIV prevalence than EPI-VIH. From a cost perspective it would benefit from being implemented in locations highly frequented by MSM. Conversely, its good visibility led to reduced periods of undiagnosed infection in a high proportion of MSM who were not testing with the recommended frequency.

1/f noise as a reliability estimation for solar panels

Science.gov (United States)

Alabedra, R.; Orsal, B.

The purpose of this work is a study of the 1/f noise from a forward biased dark solar cell as a nondestructive reliability estimation of solar panels. It is shown that one cell with a given defect can be detected in a solar panel by low frequency noise measurements at obscurity. One real solar panel of 5 cells in parallel and 5 cells in series is tested by this method. The cells for space application are n(+)p monocrystalline silicon junction with an area of 8 sq cm and a base resistivity of 10 ohm/cm. In the first part of this paper the I-V, Rd=f(1) characteristics of one cell or of a panel are not modified when a small defect is introduced by a mechanical constraint. In the second part, the theoretical results on the 1/f noise in a p-n junction under forward bias are recalled. It is shown that the noise of the cell with a defect is about 10 to 15 times higher than that of a good cell. If one good cell is replaced by a cell with defect in the panel 5 x 5, this leads to an increase of about 30 percent of the noise level of the panel.

Preparation and application of steeps of tea as new simulations of urine for the performance testing programme of 14C

International Nuclear Information System (INIS)

Daka, J. N.; Moodie, G.; DiNardo, A.; Kramer, G. H.

2012-01-01

14 C is one of the radionuclides for which the Canadian Nuclear Safety Commission has developed performance testing programmes (PTPs). During the PTP exercises, clients receive samples of natural urine containing spiked radionuclides, for testing. In these programmes, urine has disadvantages. These include (1) slow collection times from donors, (2) unpleasant smell and (3) potential to transmit diseases. To assist in solving some of these problems, the Canadian National Calibration Reference Centre for Bioassay and In Vivo Monitoring has conducted research with tea solutions, to find simpler, safer and more readily available alternatives to urine. This paper provides a new technique by which steeps of black tea have been successfully prepared for the 14 C PTP. The results of tea solutions compared well with those of urine. It was concluded that tea steeps, of which the spectroscopic and colour quenching properties have been adjusted, do provide appropriate urine simulations, suitable for use in PTPs. (authors)

New method of silicon photovoltaic panel fault detection using impedance spectroscopy

DEFF Research Database (Denmark)

Symonowicz, Joanna Karolina; Riedel, Nicholas; Thorsteinsson, Sune

2017-01-01

The aim of our project is to develop a new method for photovoltaic (PV) panel fault detection based on analysing its impedance spectra (IS). Although this technique was successful in assessing the state of degradation of fuel cells and batteries [1, 2], it has never been applied to PV cells...... on a wide scale. In this paper, we show that, unlike current-voltage (I-V) tests, the IS method is capable of early detection of changes in PV panel parameters due to microcracks and potential-induced degradation (PID). Although our measurements are only successful under dark conditions, the results...... are similar for both laboratory environment and for outdoor tests in various weather conditions. A fully developed IS technique, accounting for all kinds of most common PV panel degradation types, would surpass the existing PV fault detection methods then it comes to cost and accuracy [3,4]....

Application of programmable controllers to vacuum system interlocks

International Nuclear Information System (INIS)

Lee, G.; Moore, D.

1979-11-01

This paper describes the Doublet III Vacuum Control System in which all input signals and output loads are connected to a programmable controller (PC) for logical interfacing. Input signals derived from CAMAC, control panels, limit switches, etc., are implemented as output signals to CAMAC, vacuum valves, pump motors, etc., according to a logic program stored in the PC memory. The memory can be easily programmed by anyone familar with either Boolean algebra or relay-ladder network diagrams. The program data is entered with the aid of a calculator like, keyboard instrument with LED readout displays. The PC system contains a 1024 word RAM memory with a battery backup system to provide 72 hours protection of contents in case of power failure

Axial Compression Behavior of a New Type of Prefabricated Concrete Sandwich Wall Panel

Science.gov (United States)

Qun, Xie; Shuai, Wang; Chun, Liu

2018-03-01

A novel type of prefabricated concrete sandwich wall panel which could be used as a load-bearing structural element in buildings has been presented in this paper. Compared with the traditional sandwich panels, there are several typical characteristics for this wall system, including core columns confined by spiral stirrup along the cross-section of panel with 600mm spacing, precast foamed concrete block between two structural layers as internal insulation part, and a three-dimensional (3D) steel wire skeleton in each layer which is composed of two vertical steel wire meshes connected by horizontally short steel bar. All steel segments in the panel are automatically prefabricated in factory and then are assembled to form steel system in site. In order to investigate the structural behavior of this wall panel, two full-scale panels have been experimentally studied under axial compressive load. The test results show that the wall panel presents good load-bearing capacity and integral stiffness without out-of-plane flexural failure. Compared to the panel with planar steel wire mesh in concrete layer, the panel with 3D steel wire skeleton presents higher strength and better rigidity even in the condition of same steel ratio in panels which verifies that the 3D steel skeleton could greatly enhance the structural behavior of sandwich panel.

Non-Uniform Compressive Strength of Debonded Sandwich Panels

DEFF Research Database (Denmark)

Nøkkentved, Alexandros; Lundsgaard-Larsen, Christian; Berggreen, Carl Christian

2005-01-01

debonds show a considerable strength reduction with increasing debond diameter, with failure mechanisms varying between fast debond propagation and wrinkling-introduced face compression failure for large and small debonds, respectively. Residual strength predictions are based on intact panel testing...

Make Your Own Solar Panel.

Science.gov (United States)

Suzuki, David

1992-01-01

Presents an activity in which students make a simulated solar panel to learn about the principles behind energy production using solar panels. Provides information about how solar panels function to produce energy. (MCO)

A Power Case Study for Monocrystalline and Polycrystalline Solar Panels in Bursa City, Turkey

OpenAIRE

Taşçıoğlu, Ayşegül; Taşkın, Onur; Vardar, Ali

2016-01-01

It was intended to reveal the time dependent power generation under different loads for two different solar panels under the conditions of Bursa province in between August 19 and 25, 2014. The testing sets include solar panels, inverter, multimeter, accumulator, regulator, pyranometer, pyrheliometer, temperature sensor, and datalogger. The efficiency of monocrystalline and polycrystalline solar panels was calculated depending on the climatic data’s measurements. As the result of the study, th...

Global survey of malaria rapid diagnostic test (RDT) sales, procurement and lot verification practices: assessing the use of the WHO-FIND Malaria RDT Evaluation Programme (2011-2014).

Science.gov (United States)

Incardona, Sandra; Serra-Casas, Elisa; Champouillon, Nora; Nsanzabana, Christian; Cunningham, Jane; González, Iveth J

2017-05-15

Malaria rapid diagnostic tests (RDTs) play a critical role in malaria case management, and assurance of quality is a key factor to promote good adherence to test results. Since 2007, the World Health Organization (WHO) and the Foundation for Innovative New Diagnostics (FIND) have coordinated a Malaria RDT Evaluation Programme, comprising a pre-purchase performance evaluation (product testing, PT) and a pre-distribution quality control of lots (lot testing, LT), the former being the basis of WHO recommendations for RDT procurement. Comprehensive information on malaria RDTs sold worldwide based on manufacturers' data and linked to independent performance data is currently not available, and detailed knowledge of procurement practices remains limited. The use of the PT/LT Programme results as well as procurement and lot verification practices were assessed through a large-scale survey, gathering product-specific RDT sales and procurement data (2011-14 period) from a total of 32 manufacturers, 12 procurers and 68 National Malaria Control Programmes (NMCPs). Manufacturers' reports showed that RDT sales had more than doubled over the four years, and confirmed a trend towards increased compliance with the WHO procurement criteria (from 83% in 2011 to 93% in 2014). Country-level reports indicated that 74% of NMCPs procured only 'WHO-compliant' RDT products, although procurers' transactions datasets revealed a surprisingly frequent overlap of different products and even product types (e.g., Plasmodium falciparum-only and Plasmodium-pan) in the same year and country (60 and 46% of countries, respectively). Importantly, the proportion of 'non-complying' (i.e., PT low scored or not evaluated) products was found to be higher in the private health care sector than in the public sector (32% vs 5%), and increasing over time (from 22% of private sector sales in 2011 to 39% in 2014). An estimated 70% of the RDT market was covered by the LT programme. The opinion about the PT

Solar panel parallel mounting configuration

Science.gov (United States)

Mutschler, Jr., Edward Charles (Inventor)

1998-01-01

A spacecraft includes a plurality of solar panels interconnected with a power coupler and an electrically operated device to provide power to the device when the solar cells are insolated. The solar panels are subject to bending distortion when entering or leaving eclipse. Spacecraft attitude disturbances are reduced by mounting each of the solar panels to an elongated boom made from a material with a low coefficient of thermal expansion, so that the bending of one panel is not communicated to the next. The boom may be insulated to reduce its bending during changes in insolation. A particularly advantageous embodiment mounts each panel to the boom with a single mounting, which may be a hinge. The single mounting prevents transfer of bending moments from the panel to the boom.

Experimental identification of noise reduction properties of honeycomb panels using a small cabin

OpenAIRE

D'Ortona, Vittorio; Vivolo, Marianna; Pluymers, Bert; Vandepitte, Dirk; Desmet, Wim

2013-01-01

A procedure to identify the noise reduction properties of panels by means of a single cabin test setup is discussed. The complexity of the sound pressure field that builds up in the acoustic volume requires the support of advanced numerical techniques allowing for the evaluation of noise and vibration performances. Numerical models are used to predict the structural dynamics and the vibro-acoustic behaviour of the tested panel. Both Finite Element and Boundary Element simulations are validate...

Contrastes de hipótesis en datos de panel

Directory of Open Access Journals (Sweden)

Bosch Mossi, Mariano

2005-01-01

Full Text Available Una de las principales aportaciones del análisis de datos de panel es que permite medir efectos y comportamientos que no es posible identificar en datos puros de series temporales o de corte transversal. Cuando se plantea la cuestión de cuál es la especificación más adecuada a nuestra situación de estudio con datos de panel, o cuál el método de estimación más apropiado, los contrastes de hipótesis suponen una herramienta útil que permite dar soporte o rechazar determinados supuestos. La doble dimensionalidad de los conjuntos de datos de panel permite en algunos casos adaptar los contrastes de hipótesis ya planteados para alguna de sus dos dimensiones, y en otros, ha requerido el planteamiento de tests propios de los datos de panel. En este trabajo se recogen algunos de los contrastes más frecuentes que pueden plantearse cuando se trabaja con datos de panel, y se presenta una aplicación al estudio de los efectos de la inversión pública federal mexicana, con datos de los estados mexicanos durante el periodo 1970-2000.

The Round robin test of the PISC-2 programme: plates and ultrasonic procedures used PISC 2 report N.2. Final issue

International Nuclear Information System (INIS)

1986-09-01

Ultrasonic testing is widely used for detecting, locating and sizing defects in primary circuit elements at various stages of plant life. The successive PISC projects have together made up a most notable sustained international effort to assess the effectiveness of these inspection techniques. The Plate Inspection Steering Committee (PISC-I) programme (1976-1980) was intended to establish the capabilities of manual ultrasonic procedure based on the 1974 ASME Code Section XI Procedure. The Programme for the Inspection of Steel Components (PISC-II, 1981-1986) constitutes a broader based evaluation of the best performance obtainable by modern ultrasonic techniques under optimal conditions. The present paper is the second in a series of reports currently being issued which describe the results of the PISC-II studies. Included are descriptions of the four round robin test plates and of the ultrasonic procedures applied to them by the participating inspection teams. The report also lists the participating organisations and gives the time schedule of the tests and an indication of the costs incurred

Canadian programme overview

International Nuclear Information System (INIS)

Fluke, R.J.

1997-01-01

In a severe accident, hydrogen is released into containment. When it is well mixed, the hydrogen mixture is nonflammable because there is sufficient dilution by the large containment volume. This is the desired end point. However, the release may occur into smaller compartments of containment, stratification may occur, and local pockets of flammable mixtures may arise if hydrogen is released faster than processes that mix and disperse it. Long term hydrogen generation from water radiolysis must also be considered. Hydrogen mitigation and control strategies adopted or considered in Canada include fanforced mixing, glow plug igniters, recombiners, venting through filters, or combinations of these. The Canadian hydrogen programme is focussed on understanding hydrogen combustion behaviour and providing the data needed to demonstrate the adequacy of hydrogen mitigation and control strategies. The programme includes both experimental and modelling components of hydrogen combustion and distribution. Experiments include mixing tests, deflagration tests, diffusion flames, transition from deflagration to detonation, and testing the performance of igniters and recombiners. Modelling is focussing on the GOTHIC code as an industry standard. Detailed three dimensional modelling of gas mixing and combustion are underway, and a code validation matrix is being assembled for validation exercises. Significant progress has been made, highlights from which are being presented at this workshop. (author)

Seismic hazard analysis. Review panel, ground motion panel, and feedback results

International Nuclear Information System (INIS)

Bernreuter, D.L.

1981-10-01

The Site Specific Spectra Project (SSSP) was a multi-year study funded by the U.S. Nuclear Regulatory Commission to provide estimates of the seismic hazards at a number of nuclear power plant sites in the Eastern U.S. A key element of our approach was the Peer Review Panel, which we formed in order to ensure that our use of expert opinion was reasonable. We discuss the Peer Review Panel results and provide the complete text of each member's report. In order to improve the ground motion model, an Eastern U.S. Ground Motion Model Panel was formed. In Section 4 we tabulate the responses from the panel members to our feedback questionnaire and discuss the implications of changes introduced by them. We conclude that the net difference in seismic hazard values from those presented in Volume 4 is small and does not warrant a reanalysis. (author)

Water spray cooling technique applied on a photovoltaic panel: The performance response

International Nuclear Information System (INIS)

Nižetić, S.; Čoko, D.; Yadav, A.; Grubišić-Čabo, F.

2016-01-01

Highlights: • An experimental study was conducted on a monocrystalline photovoltaic panel (PV). • A water spray cooling technique was implemented to determine PV panel response. • The experimental results showed favorable cooling effect on the panel performance. • A feasibility aspect of the water spray cooling technique was also proven. - Abstract: This paper presents an alternative cooling technique for photovoltaic (PV) panels that includes a water spray application over panel surfaces. An alternative cooling technique in the sense that both sides of the PV panel were cooled simultaneously, to investigate the total water spray cooling effect on the PV panel performance in circumstances of peak solar irradiation levels. A specific experimental setup was elaborated in detail and the developed cooling system for the PV panel was tested in a geographical location with a typical Mediterranean climate. The experimental result shows that it is possible to achieve a maximal total increase of 16.3% (effective 7.7%) in electric power output and a total increase of 14.1% (effective 5.9%) in PV panel electrical efficiency by using the proposed cooling technique in circumstances of peak solar irradiation. Furthermore, it was also possible to decrease panel temperature from an average 54 °C (non-cooled PV panel) to 24 °C in the case of simultaneous front and backside PV panel cooling. Economic feasibility was also determined for of the proposed water spray cooling technique, where the main advantage of the analyzed cooling technique is regarding the PV panel’s surface and its self-cleaning effect, which additionally acts as a booster to the average delivered electricity.

Mounting clips for panel installation

Science.gov (United States)

Cavieres, Andres; Al-Haddad, Tristan; Goodman, Joseph

2017-07-11

A photovoltaic panel mounting clip comprising a base, central indexing tabs, flanges, lateral indexing tabs, and vertical indexing tabs. The mounting clip removably attaches one or more panels to a beam or the like structure, both mechanically and electrically. It provides secure locking of the panels in all directions, while providing guidance in all directions for accurate installation of the panels to the beam or the like structure.

Impact damage and residual strength analysis of composite panels with bonded stiffeners. [for primary aircraft structures

Science.gov (United States)

Madan, Ram C.; Shuart, Mark J.

1990-01-01

Blade-stiffened, compression-loaded cover panels were designed, manufactured, analyzed, and tested. All panels were fabricated from IM6/1808I interleafed graphite-epoxy. An orthotropic blade stiffener and an orthotropic skin were selected to satisfy the design requirements for an advanced aircraft configuration. All specimens were impact damaged prior to testing. Experimental results were obtained for three- and five-stiffener panels. Analytical results described interlaminar forces caused by impact and predicted specimen residual strength. The analytical results compared reasonably with the experimental results for residual strength of the specimens.

Drug-free workplace programmes: New Zealand perspective.

Science.gov (United States)

Nolan, Susan

2008-01-30

New Zealand (NZ) companies have been introducing Drug & Alcohol Free Workplace Policies and Programmes, which include testing, since 1992. Most "safety-critical" industry sectors are now embracing drug and alcohol testing as part of comprehensive programmes which also have a strong focus on education and rehabilitation. Prison Inmate testing was also introduced in 1998. Lawful drug testing in NZ should be conducted to the strict medico-legal requirements of the Australian/New Zealand Standard, AS/NZS 4308:2001 "Procedures for the collection, detection and quantitation of drugs of abuse in urine." This paper gives an overview of the NZ experience, highlighting the mix of testing options employed, the industry sector trends, the categories of drugs misused, the influence of significant Employment Court Judgements, proposed changes to the AS/NZS 4308(2006), and current oral fluid research projects.

Detection of irradiated food: current progress on the MAFF programme

International Nuclear Information System (INIS)

Blackburn, C.M.; Holley, P.A.; Pryke, D.C.

1994-01-01

In their 1986 report the UK's Advisory Committee on Irradiated Food recognized that a generally applicable test was not available. In view of this the Committee advised that documentary control would have to be maintained throughout the processing chain. The Committee considered that detection tests would be an useful supplement for such a control system, and would do much to reassure consumers. In the following year MAFF initiated an R/D programme covering a wide variety of potential methods. The programme now focuses on developing and validating the most promising of these. Whilst it is unlikely that there will ever be an universal test covering all foods, this programme has now reached a point where tests are becoming available for a wide variety of foods. This paper reviews the progress on a number of last years projects of MAFF (Ministry of Agriculture, Fisheries and Food). In addition to the existing MAFF collaboratively tested non-statutory method for herbs and spices, two other methods have now been published: electron spin resonance spectroscopy for meat, and detection of irradiated poultry using the limulus lyasate test based on the presence on 2-alkyl cyclobutanones in irradiated seafood, poultry and meat. The Ministry also takes an active interest in international programmes including European Community and IAEA/FAO initiatives. (author)

A Test for Parameter Homogeneity in CO2Panel EKC Estimations

International Nuclear Information System (INIS)

Dijkgraaf, E.; Vollebergh, H.R.J.

2005-01-01

This paper casts doubt on empirical results based on panel estimations of an 'inverted-U' relationship between per capita GDP and pollution. Using a new dataset for OECD countries on carbon dioxide emissions for the period 1960-1997, we find that the crucial assumption of homogeneity across countries is problematic. Decisively rejected are model specifications that feature even weaker homogeneity assumptions than are commonly used. Furthermore, our results challenge the existence of an overall Environmental Kuznets Curve for carbon dioxide emissions

Unit root tests for cross-sectionally dependent panels : The influence of observed factors

NARCIS (Netherlands)

Becheri, I.G.; Drost, F.C.; van den Akker, R.

This paper considers a heterogeneous panel unit root model with cross-sectional dependence generated by a factor structure—the factor common to all units being an observed covariate. The model is shown to be Locally Asymptotically Mixed Normal (LAMN), with the random part of the limiting Fisher

DEMAND FOR OIL PRODUCTS IN OPEC COUNTRIES: A PANEL COINTEGRATION ANALYSIS

Directory of Open Access Journals (Sweden)

Nourah Al Yousef

2013-01-01

Full Text Available The increasing consumption of oil-refined products on OPEC countries will have its impact on the availability of oil exports. The goal of this paper is to examine the determinants of oil refined products’ consumption for a panel consisting of 7 OPEC countries, namely, Algeria, Kuwait, Libya, Qatar, Saudi Arabia, United Emirates and Iran for the period of 1980–2010, by employing the recently developed panel data unit root tests and panel data cointegration techniques. Furthermore, conditional on finding cointegration, the paper extends the literature by employing the Pedroni Panel Fully Modified Ordinary Least Squares (FMOLS Dynamic OLS (DOLS procedure to generate. The study estimates the demand for Gasoline, Kerosene and Diesel. An attempt is also made to assess the impact of this demand on the future availability of OPEC oil exports.

Termite Resistance of MDF Panels Treated with Various Boron Compounds

Directory of Open Access Journals (Sweden)

Sedat Ondaral

2009-06-01

Full Text Available In this study, the effects of various boron compounds on the termite resistance of MDF panels were evaluated. Either borax (BX, boric acid (BA, zinc borate (ZB, or sodium perborate tetrahydrate (SPT were added to urea-formaldehyde (UF resin at target contents of 1%, 1.5%, 2% and 2.5% based on dry fiber weight. The panels were then manufactured using 12% urea-formaldehyde resin and 1% NH4Cl. MDF samples from the panels were tested against the subterranean termites, Coptotermes formosanus Shiraki. Laboratory termite resistance tests showed that all samples containing boron compounds had greater resistance against termite attack compared to untreated MDF samples. At the second and third weeks of exposure, nearly 100% termite mortalities were recorded in all boron compound treated samples. The highest termite mortalities were determined in the samples with either BA or BX. Also, it was found that SPT showed notable performance on the termite mortality. As chemical loadings increased, termite mortalities increased, and at the same time the weight losses of the samples decreased.