Limit Theory for Panel Data Models with Cross Sectional Dependence and Sequential Exogeneity.

Science.gov (United States)

Kuersteiner, Guido M; Prucha, Ingmar R

2013-06-01

The paper derives a general Central Limit Theorem (CLT) and asymptotic distributions for sample moments related to panel data models with large n . The results allow for the data to be cross sectionally dependent, while at the same time allowing the regressors to be only sequentially rather than strictly exogenous. The setup is sufficiently general to accommodate situations where cross sectional dependence stems from spatial interactions and/or from the presence of common factors. The latter leads to the need for random norming. The limit theorem for sample moments is derived by showing that the moment conditions can be recast such that a martingale difference array central limit theorem can be applied. We prove such a central limit theorem by first extending results for stable convergence in Hall and Hedye (1980) to non-nested martingale arrays relevant for our applications. We illustrate our result by establishing a generalized estimation theory for GMM estimators of a fixed effect panel model without imposing i.i.d. or strict exogeneity conditions. We also discuss a class of Maximum Likelihood (ML) estimators that can be analyzed using our CLT.

Panel Analysis

DEFF Research Database (Denmark)

Brænder, Morten; Andersen, Lotte Bøgh

2014-01-01

Based on our 2013-article, ”Does Deployment to War Affect Soldiers' Public Service Motivation – A Panel Study of Soldiers Before and After their Service in Afghanistan”, we present Panel Analysis as a methodological discipline. Panels consist of multiple units of analysis, observed at two or more...... in research settings where it is not possible to distribute units of analysis randomly or where the independent variables cannot be manipulated. The greatest disadvantage in regard to using panel studies is that data may be difficult to obtain. This is most clearly vivid in regard to the use of panel surveys...... points in time. In comparison with traditional cross-sectional studies, the advantage of using panel studies is that the time dimension enables us to study effects. Whereas experimental designs may have a clear advantage in regard to causal inference, the strength of panel studies is difficult to match...

Panel reports of the first session of the workshop on coal for California

Energy Technology Data Exchange (ETDEWEB)

Davidson, Karen R.

1980-05-01

The panel reports are the result of a five-day workshop held at the Pajaro Dunes Conference Center, Watsonville, California, October 1-6, 1978. The workshop was conducted by JPL, under the sponsorship of the US Department of Energy and the California Energy Commission. The purpose of the exercise was to assay the opinions of a broad range of groups in order to identify what people perceive to be the problems associated with increased coal use in California. Representatives from utilities, industry, mining companies, citizens groups, and the academic community were divided into seven panels, each of which prepared a report. Representatives of government agencies attended as observers. The panels examined end-uses of coal in California, mine-mouth conversion, advanced concepts and use of Alaskan coal, environmental effects, public acceptance, finance, and legislation and regulation.

Proceedings: special panel on geothermal model intercomparison study

Energy Technology Data Exchange (ETDEWEB)

1980-12-17

Separate abstracts were prepared for five papers. Two papers were abstracted previously for EDB. Five panel responses to the project, three workshop session summaries, and conclusions drawn are also included in this report. (MHR)

47 CFR 97.513 - VE session manager requirements.

Science.gov (United States)

2010-10-01

... 47 Telecommunication 5 2010-10-01 2010-10-01 false VE session manager requirements. 97.513 Section... SERVICES AMATEUR RADIO SERVICE Qualifying Examination Systems § 97.513 VE session manager requirements. (a) A VE session manager may be selected by the VE team for each examination session. The VE session...

Session: What do we know about cumulative or population impacts

Energy Technology Data Exchange (ETDEWEB)

Kerlinger, Paul; Manville, Al; Kendall, Bill

2004-09-01

This session at the Wind Energy and Birds/Bats workshop consisted of a panel discussion followed by a discussion/question and answer period. The panelists were Paul Kerlinger, Curry and Kerlinger, LLC, Al Manville, U.S. Fish and Wildlife Service, and Bill Kendall, US Geological Service. The panel addressed the potential cumulative impacts of wind turbines on bird and bat populations over time. Panel members gave brief presentations that touched on what is currently known, what laws apply, and the usefulness of population modeling. Topics addressed included which sources of modeling should be included in cumulative impacts, comparison of impacts from different modes of energy generation, as well as what research is still needed regarding cumulative impacts of wind energy development on bird and bat populations.

Business challenges for the young generation. Panel Discussion

International Nuclear Information System (INIS)

Margolis, Robert; Shoop, Undine; Umstadter, Karl; Plies, Christina; Allen, Todd; Sackett, John; Klein, Dale; Gates, W. Gary; Simmons, Sonja

2001-01-01

This special panel session will capture the views of senior professionals on how to address the need to attract new talent to the nuclear profession. Young professionals will express their views on how to attract new talent to the nuclear profession. (authors)

Panel Data with Cross-Sectional Dependence Characterized by a Multi-Level Factor Structure

DEFF Research Database (Denmark)

Rodríguez-Caballero, Carlos Vladimir

A panel data model with a multi-level cross-sectional dependence is proposed. The factor structure is driven by top-level common factors as well as non-pervasive factors. I propose a simple method to filter out the full factor structure that overcomes limitations in standard procedures which may...... mix up both levels of unobservable factors and may hamper the identification of the model. The model covers both stationary and non-stationary cases and takes into account other relevant features that make the model well suited to the analysis of many types of time series frequently addressed...

Conclusions on the two technical panels on HLW-disposal and waste treatment processes respectively

International Nuclear Information System (INIS)

Dinkespiller, J.A.; Dejonghe, P.; Feates, F.

1986-01-01

The paper reports the concluding panel session at the European Community Conference on radioactive waste management and disposal, Luxembourg 1985. The panel considered the conclusions of two preceeding technical panels on high level waste (HLW) disposal and waste treatment processes. Geological disposal of HLW, waste management, safety assessment of waste disposal, public opinion, public acceptance of the manageability of radioactive wastes, international cooperation, and waste management in the United States, are all discussed. (U.K.)

Unobserved Heterogeneity in the Binary Logit Model with Cross-Sectional Data and Short Panels

DEFF Research Database (Denmark)

Holm, Anders; Jæger, Mads Meier; Pedersen, Morten

This paper proposes a new approach to dealing with unobserved heterogeneity in applied research using the binary logit model with cross-sectional data and short panels. Unobserved heterogeneity is particularly important in non-linear regression models such as the binary logit model because, unlike...... in linear regression models, estimates of the effects of observed independent variables are biased even when omitted independent variables are uncorrelated with the observed independent variables. We propose an extension of the binary logit model based on a finite mixture approach in which we conceptualize...

Gender-specific Regulatory Challenges to Product Approval: a panel discussion.

Science.gov (United States)

McGregor, Alyson J; Barr, Helen; Greenberg, Marna R; Safdar, Basmah; Wildgoose, Peter; Wright, David W; Hollander, Judd E

2014-12-01

On May 13, 2014, a 1-hour panel discussion session titled "Gender-specific Regulatory Challenges to Product Approval" was held during the Academic Emergency Medicine consensus conference, "Gender-specific Research in Emergency Medicine: Investigate, Understand, and Translate How Gender Affects Patient Outcomes." The session sought to bring together leaders in emergency medicine (EM) research, authors, and reviewers in EM research publications, as well as faculty, fellows, residents, and students engaged in research and clinical practice. A panel was convened involving a representative from the Office of Women's Health of the U.S. Food and Drug Administration, two pharmaceutical executives, and a clinical EM researcher. The moderated discussion also involved audience members who contributed significantly to the dialogue. Historical background leading up to the session along with the main themes of the discussion are reproduced in this article. These revolve around sex- and gender-specific research, statistical analysis of sex and gender, clinical practice, financial costs associated with pharmaceutical development, adaptive design, and specific recommendations on the regulatory process as it affects the specialty of EM. © 2014 by the Society for Academic Emergency Medicine.

An investigation on the determinants of carbon emissions for OECD countries: empirical evidence from panel models robust to heterogeneity and cross-sectional dependence.

Science.gov (United States)

Dogan, Eyup; Seker, Fahri

2016-07-01

This empirical study analyzes the impacts of real income, energy consumption, financial development and trade openness on CO2 emissions for the OECD countries in the Environmental Kuznets Curve (EKC) model by using panel econometric approaches that consider issues of heterogeneity and cross-sectional dependence. Results from the Pesaran CD test, the Pesaran-Yamagata's homogeneity test, the CADF and the CIPS unit root tests, the LM bootstrap cointegration test, the DSUR estimator, and the Emirmahmutoglu-Kose Granger causality test indicate that (i) the panel time-series data are heterogeneous and cross-sectionally dependent; (ii) CO2 emissions, real income, the quadratic income, energy consumption, financial development and openness are integrated of order one; (iii) the analyzed data are cointegrated; (iv) the EKC hypothesis is validated for the OECD countries; (v) increases in openness and financial development mitigate the level of emissions whereas energy consumption contributes to carbon emissions; (vi) a variety of Granger causal relationship is detected among the analyzed variables; and (vii) empirical results and policy recommendations are accurate and efficient since panel econometric models used in this study account for heterogeneity and cross-sectional dependence in their estimation procedures.

Sensory analysis of characterising flavours: evaluating tobacco product odours using an expert panel.

Science.gov (United States)

Krüsemann, Erna J Z; Lasschuijt, Marlou P; de Graaf, C; de Wijk, René A; Punter, Pieter H; van Tiel, Loes; Cremers, Johannes W J M; van de Nobelen, Suzanne; Boesveldt, Sanne; Talhout, Reinskje

2018-05-23

Tobacco flavours are an important regulatory concept in several jurisdictions, for example in the USA, Canada and Europe. The European Tobacco Products Directive 2014/40/EU prohibits cigarettes and roll-your-own tobacco having a characterising flavour. This directive defines characterising flavour as 'a clearly noticeable smell or taste other than one of tobacco […]'. To distinguish between products with and without a characterising flavour, we trained an expert panel to identify characterising flavours by smelling. An expert panel (n=18) evaluated the smell of 20 tobacco products using self-defined odour attributes, following Quantitative Descriptive Analysis. The panel was trained during 14 attribute training, consensus training and performance monitoring sessions. Products were assessed during six test sessions. Principal component analysis, hierarchical clustering (four and six clusters) and Hotelling's T-tests (95% and 99% CIs) were used to determine differences and similarities between tobacco products based on odour attributes. The final attribute list contained 13 odour descriptors. Panel performance was sufficient after 14 training sessions. Products marketed as unflavoured that formed a cluster were considered reference products. A four-cluster method distinguished cherry-flavoured, vanilla-flavoured and menthol-flavoured products from reference products. Six clusters subdivided reference products into tobacco leaves, roll-your-own and commercial products. An expert panel was successfully trained to assess characterising odours in cigarettes and roll-your-own tobacco. This method could be applied to other product types such as e-cigarettes. Regulatory decisions on the choice of reference products and significance level are needed which directly influences the products being assessed as having a characterising odour. © Article author(s) (or their employer(s) unless otherwise stated in the text of the article) 2018. All rights reserved. No commercial use

Moderator report on workshop session 3

International Nuclear Information System (INIS)

Isaacs, T.

2004-01-01

While much in Stakeholder confidence work is focused on the periods of project conceptualization, siting, and development, eventually a successful waste programme will result in a set of facilities with visual, aesthetic, and other physical impacts on the host community. This most interesting and interactive session explored both the artistic and aesthetic aspects of the waste management process and the relationship among the stakeholders, particularly the affected local communities and those who might help develop both the products and processes associated with implementation. Two insightful presentations were made, followed by a lively panel discussion and interactions with the broader FSC participants. (author)

Report of the Panel on Nuclear Standards Needed for Neutron Cross Section Measurements. Brussels, Belgium, 8-12 May 1967. Part 1

Energy Technology Data Exchange (ETDEWEB)

NONE

1967-05-15

The International Nuclear Data Committee (INDC), in September of 1965, recommended to the International Atomic Energy Agency that a panel be convened to examine the nuclear standards needed for neutron cross section measurements. The accuracy requirements for cross sections of structural and fuel materials needed for the design of nuclear reactors and for precision neutron dosimetry have fostered an interest in the selection and investigation of standard cross sections and in the neutron flux measuring techniques. A Panel met in Brussels during the second week of May 1967 to review the problems and progress associated with these standards activities, and to make specific recommendations concerning these matters to the IAEA. This Panel consisted of 23 scientists representing 11 countries, European Atomic Energy Community (EURATOM), the IAEA, and Bureau International des Poids and Mesures (BIPM). The field of neutron cross section standards is not one in which rapid progress can be expected. Very rarely is there a breakthrough to initiate a spectacular advance; on the contrary it is necessary to depend upon persistent application of effort to effect gradual improvements in accuracies or the clearing up of aggravating discrepancies. Despite this, however, the progress of recent years has been very encouraging. There are no doubt many reasons for this, but three are worthy of mention here. First the Symposium on Neutron Flux Standards in the 1-100 keV Region held at Oxford, United Kingdom, 1963, suggested and strongly supported by the European American Nuclear Data Committee (EANDC), certainly stimulated much activity in the field. Second, the EANDC itself has kept a watchful eye on the subsequent activity and has made sure that the interest has been sustained. Third, the recognized Standards laboratories in several countries have become more aware of the problems and are rapidly becoming major contributors to the field. The Panel of which the present report is the

Report of the Panel on Nuclear Standards Needed for Neutron Cross Section Measurements. Brussels, Belgium, 8-12 May 1967. Part 1

International Nuclear Information System (INIS)

1967-05-01

The International Nuclear Data Committee (INDC), in September of 1965, recommended to the International Atomic Energy Agency that a panel be convened to examine the nuclear standards needed for neutron cross section measurements. The accuracy requirements for cross sections of structural and fuel materials needed for the design of nuclear reactors and for precision neutron dosimetry have fostered an interest in the selection and investigation of standard cross sections and in the neutron flux measuring techniques. A Panel met in Brussels during the second week of May 1967 to review the problems and progress associated with these standards activities, and to make specific recommendations concerning these matters to the IAEA. This Panel consisted of 23 scientists representing 11 countries, European Atomic Energy Community (EURATOM), the IAEA, and Bureau International des Poids and Mesures (BIPM). The field of neutron cross section standards is not one in which rapid progress can be expected. Very rarely is there a breakthrough to initiate a spectacular advance; on the contrary it is necessary to depend upon persistent application of effort to effect gradual improvements in accuracies or the clearing up of aggravating discrepancies. Despite this, however, the progress of recent years has been very encouraging. There are no doubt many reasons for this, but three are worthy of mention here. First the Symposium on Neutron Flux Standards in the 1-100 keV Region held at Oxford, United Kingdom, 1963, suggested and strongly supported by the European American Nuclear Data Committee (EANDC), certainly stimulated much activity in the field. Second, the EANDC itself has kept a watchful eye on the subsequent activity and has made sure that the interest has been sustained. Third, the recognized Standards laboratories in several countries have become more aware of the problems and are rapidly becoming major contributors to the field. The Panel of which the present report is the

MO-F-201-01: Panel Member

Energy Technology Data Exchange (ETDEWEB)

Evans, J. [Virginia Commonwealth University (United States)

2016-06-15

The goal of this session is to provide guidance to medical physicists undergoing the American Board of Radiology certification process in therapeutic medical physics. This panel discussion will focus on parts 2 (computer-based) and 3 (oral) of the examination. Unlike the latter portions of the exam which are specialty-driven, part 1 is universal for all medical physics fields and will not be addressed. This session is structured into different topics that aim to guide the participants on how to successfully prepare for the board exams. The subjects of discussion will include timing and strategies for exam preparation, crucial differences in preparing for the clinical computer-based exam versus the oral exam, what study tools are currently available for each, etc. The panel discussion format will allow the speakers to collectively present their experience and advice relating to each topic and foment audience participation. Learning Objectives: Know the main differences between what is expected for parts 2 and 3 Know different resources for test preparation Know how to formulate a plan to best study for each part based on the specific skill set the two parts require Know how to best present his/her answers during the oral examination – demeanor, answer structure, etc.

MO-F-201-02: Panel Member

Energy Technology Data Exchange (ETDEWEB)

Padilla, L. [Virginia Commonwealth University (United States)

2016-06-15

The goal of this session is to provide guidance to medical physicists undergoing the American Board of Radiology certification process in therapeutic medical physics. This panel discussion will focus on parts 2 (computer-based) and 3 (oral) of the examination. Unlike the latter portions of the exam which are specialty-driven, part 1 is universal for all medical physics fields and will not be addressed. This session is structured into different topics that aim to guide the participants on how to successfully prepare for the board exams. The subjects of discussion will include timing and strategies for exam preparation, crucial differences in preparing for the clinical computer-based exam versus the oral exam, what study tools are currently available for each, etc. The panel discussion format will allow the speakers to collectively present their experience and advice relating to each topic and foment audience participation. Learning Objectives: Know the main differences between what is expected for parts 2 and 3 Know different resources for test preparation Know how to formulate a plan to best study for each part based on the specific skill set the two parts require Know how to best present his/her answers during the oral examination – demeanor, answer structure, etc.

MO-F-201-03: Panel Member

Energy Technology Data Exchange (ETDEWEB)

Studenski, M. [University of Miami (United States)

2016-06-15

The goal of this session is to provide guidance to medical physicists undergoing the American Board of Radiology certification process in therapeutic medical physics. This panel discussion will focus on parts 2 (computer-based) and 3 (oral) of the examination. Unlike the latter portions of the exam which are specialty-driven, part 1 is universal for all medical physics fields and will not be addressed. This session is structured into different topics that aim to guide the participants on how to successfully prepare for the board exams. The subjects of discussion will include timing and strategies for exam preparation, crucial differences in preparing for the clinical computer-based exam versus the oral exam, what study tools are currently available for each, etc. The panel discussion format will allow the speakers to collectively present their experience and advice relating to each topic and foment audience participation. Learning Objectives: Know the main differences between what is expected for parts 2 and 3 Know different resources for test preparation Know how to formulate a plan to best study for each part based on the specific skill set the two parts require Know how to best present his/her answers during the oral examination – demeanor, answer structure, etc.

MO-F-201-04: Panel Member

Energy Technology Data Exchange (ETDEWEB)

McNutt, T. [Johns Hopkins University (United States)

2016-06-15

The goal of this session is to provide guidance to medical physicists undergoing the American Board of Radiology certification process in therapeutic medical physics. This panel discussion will focus on parts 2 (computer-based) and 3 (oral) of the examination. Unlike the latter portions of the exam which are specialty-driven, part 1 is universal for all medical physics fields and will not be addressed. This session is structured into different topics that aim to guide the participants on how to successfully prepare for the board exams. The subjects of discussion will include timing and strategies for exam preparation, crucial differences in preparing for the clinical computer-based exam versus the oral exam, what study tools are currently available for each, etc. The panel discussion format will allow the speakers to collectively present their experience and advice relating to each topic and foment audience participation. Learning Objectives: Know the main differences between what is expected for parts 2 and 3 Know different resources for test preparation Know how to formulate a plan to best study for each part based on the specific skill set the two parts require Know how to best present his/her answers during the oral examination – demeanor, answer structure, etc.

MO-E-BRB-02: Panel Member

Energy Technology Data Exchange (ETDEWEB)

Larner, J. [University of Virginia (United States)

2016-06-15

In this interactive session, lung SBRT patient cases will be presented to highlight real-world considerations for ensuring safe and accurate treatment delivery. An expert panel of speakers will discuss challenges specific to lung SBRT including patient selection, patient immobilization techniques, 4D CT simulation and respiratory motion management, target delineation for treatment planning, online treatment alignment, and established prescription regimens and OAR dose limits. Practical examples of cases, including the patient flow thought the clinical process are presented and audience participation will be encouraged. This panel session is designed to provide case demonstration and review for lung SBRT in terms of (1) clinical appropriateness in patient selection, (2) strategies for simulation, including 4D and respiratory motion management, and (3) applying multi imaging modality (4D CT imaging, MRI, PET) for tumor volume delineation and motion extent, and (4) image guidance in treatment delivery. Learning Objectives: Understand the established requirements for patient selection in lung SBRT Become familiar with the various immobilization strategies for lung SBRT, including technology for respiratory motion management Understand the benefits and pitfalls of applying multi imaging modality (4D CT imaging, MRI, PET) for tumor volume delineation and motion extent determination for lung SBRT Understand established prescription regimes and OAR dose limits.

MO-E-BRB-03: Panel Member

Energy Technology Data Exchange (ETDEWEB)

Salter, B. [University Utah (United States)

2016-06-15

In this interactive session, lung SBRT patient cases will be presented to highlight real-world considerations for ensuring safe and accurate treatment delivery. An expert panel of speakers will discuss challenges specific to lung SBRT including patient selection, patient immobilization techniques, 4D CT simulation and respiratory motion management, target delineation for treatment planning, online treatment alignment, and established prescription regimens and OAR dose limits. Practical examples of cases, including the patient flow thought the clinical process are presented and audience participation will be encouraged. This panel session is designed to provide case demonstration and review for lung SBRT in terms of (1) clinical appropriateness in patient selection, (2) strategies for simulation, including 4D and respiratory motion management, and (3) applying multi imaging modality (4D CT imaging, MRI, PET) for tumor volume delineation and motion extent, and (4) image guidance in treatment delivery. Learning Objectives: Understand the established requirements for patient selection in lung SBRT Become familiar with the various immobilization strategies for lung SBRT, including technology for respiratory motion management Understand the benefits and pitfalls of applying multi imaging modality (4D CT imaging, MRI, PET) for tumor volume delineation and motion extent determination for lung SBRT Understand established prescription regimes and OAR dose limits.

MO-E-BRB-01: Panel Member

Energy Technology Data Exchange (ETDEWEB)

Benedict, S. [University of California Davis Medical Center (United States)

2016-06-15

In this interactive session, lung SBRT patient cases will be presented to highlight real-world considerations for ensuring safe and accurate treatment delivery. An expert panel of speakers will discuss challenges specific to lung SBRT including patient selection, patient immobilization techniques, 4D CT simulation and respiratory motion management, target delineation for treatment planning, online treatment alignment, and established prescription regimens and OAR dose limits. Practical examples of cases, including the patient flow thought the clinical process are presented and audience participation will be encouraged. This panel session is designed to provide case demonstration and review for lung SBRT in terms of (1) clinical appropriateness in patient selection, (2) strategies for simulation, including 4D and respiratory motion management, and (3) applying multi imaging modality (4D CT imaging, MRI, PET) for tumor volume delineation and motion extent, and (4) image guidance in treatment delivery. Learning Objectives: Understand the established requirements for patient selection in lung SBRT Become familiar with the various immobilization strategies for lung SBRT, including technology for respiratory motion management Understand the benefits and pitfalls of applying multi imaging modality (4D CT imaging, MRI, PET) for tumor volume delineation and motion extent determination for lung SBRT Understand established prescription regimes and OAR dose limits.

MO-F-201-01: Panel Member

International Nuclear Information System (INIS)

Evans, J.

2016-01-01

The goal of this session is to provide guidance to medical physicists undergoing the American Board of Radiology certification process in therapeutic medical physics. This panel discussion will focus on parts 2 (computer-based) and 3 (oral) of the examination. Unlike the latter portions of the exam which are specialty-driven, part 1 is universal for all medical physics fields and will not be addressed. This session is structured into different topics that aim to guide the participants on how to successfully prepare for the board exams. The subjects of discussion will include timing and strategies for exam preparation, crucial differences in preparing for the clinical computer-based exam versus the oral exam, what study tools are currently available for each, etc. The panel discussion format will allow the speakers to collectively present their experience and advice relating to each topic and foment audience participation. Learning Objectives: Know the main differences between what is expected for parts 2 and 3 Know different resources for test preparation Know how to formulate a plan to best study for each part based on the specific skill set the two parts require Know how to best present his/her answers during the oral examination – demeanor, answer structure, etc.

MO-F-201-04: Panel Member

International Nuclear Information System (INIS)

McNutt, T.

2016-01-01

The goal of this session is to provide guidance to medical physicists undergoing the American Board of Radiology certification process in therapeutic medical physics. This panel discussion will focus on parts 2 (computer-based) and 3 (oral) of the examination. Unlike the latter portions of the exam which are specialty-driven, part 1 is universal for all medical physics fields and will not be addressed. This session is structured into different topics that aim to guide the participants on how to successfully prepare for the board exams. The subjects of discussion will include timing and strategies for exam preparation, crucial differences in preparing for the clinical computer-based exam versus the oral exam, what study tools are currently available for each, etc. The panel discussion format will allow the speakers to collectively present their experience and advice relating to each topic and foment audience participation. Learning Objectives: Know the main differences between what is expected for parts 2 and 3 Know different resources for test preparation Know how to formulate a plan to best study for each part based on the specific skill set the two parts require Know how to best present his/her answers during the oral examination – demeanor, answer structure, etc.

78 FR 63501 - Meetings of Humanities Panel

Science.gov (United States)

2013-10-24

... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: National Endowment for the Humanities. ACTION: Notice of meetings. SUMMARY: Pursuant to section 10(a)(2) of the... Humanities Panel will be held during November, 2013 as follows. The purpose of the meetings is for panel...

Acoustically Tailored Composite Rotorcraft Fuselage Panels

Science.gov (United States)

Hambric, Stephen; Shepherd, Micah; Koudela, Kevin; Wess, Denis; Snider, Royce; May, Carl; Kendrick, Phil; Lee, Edward; Cai, Liang-Wu

2015-01-01

A rotorcraft roof sandwich panel has been redesigned to optimize sound power transmission loss (TL) and minimize structure-borne sound for frequencies between 1 and 4 kHz where gear meshing noise from the transmission has the most impact on speech intelligibility. The roof section, framed by a grid of ribs, was originally constructed of a single honeycomb core/composite face sheet panel. The original panel has coincidence frequencies near 700 Hz, leading to poor TL across the frequency range of 1 to 4 kHz. To quiet the panel, the cross section was split into two thinner sandwich subpanels separated by an air gap. The air gap was sized to target the fundamental mass-spring-mass resonance of the double panel system to less than 500 Hz. The panels were designed to withstand structural loading from normal rotorcraft operation, as well as 'man-on-the-roof' static loads experienced during maintenance operations. Thin layers of VHB 9469 viscoelastomer from 3M were also included in the face sheet ply layups, increasing panel damping loss factors from about 0.01 to 0.05. Measurements in the NASA SALT facility show the optimized panel provides 6-11 dB of acoustic transmission loss improvement, and 6-15 dB of structure-borne sound reduction at critical rotorcraft transmission tonal frequencies. Analytic panel TL theory simulates the measured performance quite well. Detailed finite element/boundary element modeling of the baseline panel simulates TL slightly more accurately, and also simulates structure-borne sound well.

78 FR 74175 - Meetings of Humanities Panel

Science.gov (United States)

2013-12-10

... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: National Endowment for the Humanities. ACTION: Notice of meetings. SUMMARY: Pursuant to section 10(a)(2) of the... Humanities Panel will be held during January 2014 as follows. The purpose of the meetings is for panel review...

32 CFR 724.104 - NDRB Traveling Panel.

Science.gov (United States)

2010-07-01

... 32 National Defense 5 2010-07-01 2010-07-01 false NDRB Traveling Panel. 724.104 Section 724.104 National Defense Department of Defense (Continued) DEPARTMENT OF THE NAVY PERSONNEL NAVAL DISCHARGE REVIEW BOARD Definitions § 724.104 NDRB Traveling Panel. An NDRB Panel that travels for the purpose of...

7 CFR 205.509 - Peer review panel.

Science.gov (United States)

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Peer review panel. 205.509 Section 205.509 Agriculture... PROVISIONS NATIONAL ORGANIC PROGRAM Accreditation of Certifying Agents § 205.509 Peer review panel. The Administrator shall establish a peer review panel pursuant to the Federal Advisory Committee Act (FACA) (5 U.S.C...

Seismic hazard analysis. Review panel, ground motion panel, and feedback results

International Nuclear Information System (INIS)

Bernreuter, D.L.

1981-10-01

The Site Specific Spectra Project (SSSP) was a multi-year study funded by the U.S. Nuclear Regulatory Commission to provide estimates of the seismic hazards at a number of nuclear power plant sites in the Eastern U.S. A key element of our approach was the Peer Review Panel, which we formed in order to ensure that our use of expert opinion was reasonable. We discuss the Peer Review Panel results and provide the complete text of each member's report. In order to improve the ground motion model, an Eastern U.S. Ground Motion Model Panel was formed. In Section 4 we tabulate the responses from the panel members to our feedback questionnaire and discuss the implications of changes introduced by them. We conclude that the net difference in seismic hazard values from those presented in Volume 4 is small and does not warrant a reanalysis. (author)

Efficient market hypothesis in emerging markets: Panel data evidence with multiple breaks and cross sectional dependence

OpenAIRE

Abd Halim Ahmad; Siti Nurazira Mohd Daud; W.N.W. Azman-Saini

2010-01-01

The purpose of this paper is to re-examine whether mean reversion property hold for 15 emerging stock markets for the period 1985 to 2006. Utilizing a panel stationarity test that is able to account for multiple structural breaks and cross sectional dependence, we find that the emerging stock markets follow a random walk process. However, further analysis on individual series show that the majority of stock prices in emerging markets are governed by a mean reverting process. This result, whic...

45 CFR 1801.22 - Interview of Finalists with panel.

Science.gov (United States)

2010-10-01

... 45 Public Welfare 4 2010-10-01 2010-10-01 false Interview of Finalists with panel. 1801.22 Section... FOUNDATION HARRY S. TRUMAN SCHOLARSHIP PROGRAM The Competition § 1801.22 Interview of Finalists with panel. The Foundation invites each Finalist to an interview with a regional review panel. Panels evaluate...

49 CFR 845.22 - Technical panel.

Science.gov (United States)

2010-10-01

... 49 Transportation 7 2010-10-01 2010-10-01 false Technical panel. 845.22 Section 845.22... Technical panel. The Director, Bureau of Accident Investigation, or the Director, Bureau of Field Operations, shall designate members of the Board's technical staff to participate in the hearing and initially...

Robust block bootstrap panel predictability tests

NARCIS (Netherlands)

Westerlund, J.; Smeekes, S.

2013-01-01

Most panel data studies of the predictability of returns presume that the cross-sectional units are independent, an assumption that is not realistic. As a response to this, the current paper develops block bootstrap-based panel predictability tests that are valid under very general conditions. Some

Aerospace Safety Advisory Panel

Science.gov (United States)

1999-01-01

This report covers the activities of the Aerospace Safety Advisory Panel (ASAP) for calendar year 1998-a year of sharp contrasts and significant successes at NASA. The year opened with the announcement of large workforce cutbacks. The slip in the schedule for launching the International Space Station (ISS) created a five-month hiatus in Space Shuttle launches. This slack period ended with the successful and highly publicized launch of the STS-95 mission. As the year closed, ISS assembly began with the successful orbiting and joining of the Functional Cargo Block (FGB), Zarya, from Russia and the Unity Node from the United States. Throughout the year, the Panel maintained its scrutiny of NASA's safety processes. Of particular interest were the potential effects on safety of workforce reductions and the continued transition of functions to the Space Flight Operations Contractor. Attention was also given to the risk management plans of the Aero-Space Technology programs, including the X-33, X-34, and X-38. Overall, the Panel concluded that safety is well served for the present. The picture is not as clear for the future. Cutbacks have limited the depth of talent available. In many cases, technical specialties are 'one deep.' The extended hiring freeze has resulted in an older workforce that will inevitably suffer significant departures from retirements in the near future. The resulting 'brain drain' could represent a future safety risk unless appropriate succession planning is started expeditiously. This and other topics are covered in the section addressing workforce. The major NASA programs are also limited in their ability to plan property for the future. This is of particular concern for the Space Shuttle and ISS because these programs are scheduled to operate well into the next century. In the case of the Space Shuttle, beneficial and mandatory safety and operational upgrades are being delayed because of a lack of sufficient present funding. Likewise, the ISS has

78 FR 63168 - Judges Panel of the Malcolm Baldrige National Quality Award

Science.gov (United States)

2013-10-23

... INFORMATION CONTACT: Robert Fangmeyer, Acting Director, Baldrige Performance Excellence Program, National... Baldrige National Quality Award AGENCY: National Institute of Standards and Technology, Department of... Quality Award (Judges Panel) will meet in closed session Monday through Friday, November 4-8, 2013, 8:30 a...

Strength of normal sections of NPP composite monolithic constructions with ribbed reinforced panels

International Nuclear Information System (INIS)

Klyashitskij, V.I.; Kirillov, A.P.

1980-01-01

Strength characteristics and recommendations on designing composite-monolytic structures of NPP with ribbed reinforced panels are considered. Ribbed reinforced panel consists of a system of cross ribs joined with a comparatively thin (25 mm thick) plate. The investigations were carried on using models representing columns symmetrically reinforced with reinforced panels with a low percent of reinforcing. The monolithic structures consisting of ribbed reinforced panels and cast concrete for making monoliths as well as monolithic having analogous strength characteristics of extended and compressed zones have similar strengths. It is shown that calculation of supporting power of composite-monolithic structures is performed according to techniques developed for monolithic structures. Necessity of structural transverse fittings no longer arises in case of corresponding calculational substitution of stability of compressed parts of fittings. Supporting power of a structure decreases not more than by 10% in the presence of cracks in the reinforced panels of the compressed zone. Application of composite-monolithic structures during the construction of the Kursk, Smolensk and Chernobylskaya NPPs permitted to decrease labour content and reduce periods of accomplishment of these works which saves over 6 million roubles

76 FR 4412 - Commercial Space Transportation Advisory Committee-Closed Session

Science.gov (United States)

2011-01-25

... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Commercial Space Transportation... Commercial Space Transportation Advisory Committee Special Closed Session. SUMMARY: Pursuant to Section 10(a... Commercial Space Transportation Advisory Committee (COMSTAC). The special closed session will be an...

Manpower Requirements and Education in Nuclear Science: An International Perspective Nuclear Science Manpower and Education Panel

International Nuclear Information System (INIS)

Zeisler, R.; Clark, S.B.; Parry, S.J.; Choppin, G.R.; Danesi, P.R.; Rossbach, M.; Williamson, C.; and others

2005-01-01

The MARC-VI conference served as an excellent setting for a session organized to present and discuss the problems in nuclear science manpower and education. A panel discussion and contributed papers reflected the world-wide situation. Major points of the panel discussion are presented. As a result, a resolution on the current situation of nuclear chemistry and radiochemistry was drafted and endorsed by the conference attendees. (author)

78 FR 57903 - Aerospace Safety Advisory Panel; Charter Renewal

Science.gov (United States)

2013-09-20

... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice: 13-116] Aerospace Safety Advisory Panel... and amendment of the charter of the Aerospace Safety Advisory Panel. SUMMARY: Pursuant to sections 14... determined that renewal and amendment of the charter of the Aerospace Safety Advisory Panel is in the public...

78 FR 70093 - Commercial Space Transportation Advisory Committee-Closed Session

Science.gov (United States)

2013-11-22

... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Commercial Space Transportation... Commercial Space Transportation Advisory Committee Special Closed Session. SUMMARY: Pursuant to Section 10(a...), notice is hereby given of a special closed session of the Commercial Space Transportation Advisory...

78 FR 53497 - Commercial Space Transportation Advisory Committee; Closed Session

Science.gov (United States)

2013-08-29

... DEPARTMENT OF TRANSPORTATION Federal Aviation Administration Commercial Space Transportation... Commercial Space Transportation Advisory Committee Special Closed Session. SUMMARY: Pursuant to Section 10(a...), notice is hereby given of a special closed session of the Commercial Space Transportation Advisory...

Summary record of the topical session of 16. Meeting of the IGSC

International Nuclear Information System (INIS)

Van Luik, Abe; Smith, Paul

2014-01-01

The sixteenth meeting of the Integration Group for the Safety case (IGSC) included a topical session titled: Handling extreme geological events in safety cases during the post-closure phase. The session included nine presentations on the handling of such events by various national programs, questions and answers on each presentation and ended with a general discussion period. The present document summarises the outcome of the meeting. The document is structured as follows: - Section 2 describes the types of extreme geological events discussed in the session and how these are identified, - Section 3 discusses the measures that can be taken to avoid such events and to mitigate their impact on repositories, - Section 4 describes how the likelihood and consequences of events are assessed, - Section 5 address experiences regarding interactions with regulators and other stakeholders, - Section 6 covers remaining issues and planned R and D to address these, and - Section 7 presents a recommendation for possible future collaborative work on this topic

Closing session

International Nuclear Information System (INIS)

2014-01-01

This part makes a summary of the different sessions and discussions of the workshop in a series of slide presentations: Summary of Opening Session; Summary of Session 1: Analysis of External Hazard Potential; Summary of session 2: Specific features of analysis and modeling of particular natural external hazards; Summary of session-3: Practices and research efforts on natural external events PSA; Summary of session 4: Modeling of NPP response to natural external events in PSA; Summary of session 5: Seismic Risk Analysis; Summary of session 6: Use of external events PSA with the focus on regulatory body role; Facilitated discussion 1 summary: Where do we stand in the analysis of external events?; Summary Facilitated Discussion 2: Findings and Good Practices for External Events Analysis

An intersection test for panel unit roots

NARCIS (Netherlands)

Hanck, C.

2013-01-01

This article proposes a new panel unit root test based on Simes' ( 1986) classical intersection test. The test is robust to general patterns of cross-sectional dependence and yet is straightforward to implement, only requiring p-values of time series unit root tests of the series in the panel, and

Analysis of Panel Data

Science.gov (United States)

Hsiao, Cheng

2003-02-01

Panel data models have become increasingly popular among applied researchers due to their heightened capacity for capturing the complexity of human behavior, as compared to cross-sectional or time series data models. This second edition represents a substantial revision of the highly successful first edition (1986). Recent advances in panel data research are presented in an accessible manner and are carefully integrated with the older material. The thorough discussion of theory and the judicious use of empirical examples make this book useful to graduate students and advanced researchers in economics, business, sociology and political science.

76 FR 20720 - Advisory Panel for Integrative Activities; Notice of Meeting

Science.gov (United States)

2011-04-13

... Foundation announces the following meeting: Name: Committee of Visitors Panel for the Experimental Program to Stimulate Competitive Research Science and Technology Centers (STC) 1373. Dates: May 16, 2011; 6 p.m.-8 p.m... materials. Agenda May 16, 2011 6 p.m.-8 p.m. Open Session; Welcome, overview of STC program. May 17, 2011 8...

Differing professional opinions: 1987 special review panel

International Nuclear Information System (INIS)

1988-01-01

In November 1987, the five-member Differing Professional Opinions Special Review Panel established by the Executive Director for Operations of the US Nuclear Regulatory Commission to review agency policies and procedures for handling differing professional opinions (DPOs) presented its findings and recommendations in NUREG-1290. The issuance of that report completed the first task of the panel's charter. In accordance with Manual chapter 4125, Section L, and the charter of the Special Review Panel, the panel's second task was to ''...review...the DPOs submitted subsequent to the previous Panel's review, in order to identify any employee whose DPO made a significant contribution to the Agency or to the public safety but who has not yet been recognized for such contribution.'' This Addendum provides the findings of that review

Dynamic panel data models

NARCIS (Netherlands)

Bun, M.J.G.; Sarafidis, V.

2013-01-01

This Chapter reviews the recent literature on dynamic panel data models with a short time span and a large cross-section. Throughout the discussion we considerlinear models with additional endogenous covariates. First we give a broad overview of available inference methods placing emphasis on GMM.

Public acceptance for centralized storage and repositories of low-level waste session (Panel)

Energy Technology Data Exchange (ETDEWEB)

Lutz, H.R.

1995-12-31

Participants from various parts of the world will provide a summary of their particular country`s approach to low-level waste management and the cost of public acceptance for low-level waste management facilities. Participants will discuss the number, geographic location, and type of low-level waste repositories and centralized storage facilities located in their countries. Each will discuss the amount, distribution, and duration of funds to gain public acceptance of these facilities. Participants will provide an estimated $/meter for centralized storage facilities and repositories. The panel will include a brief discussion about the ethical aspects of public acceptance costs, approaches for negotiating acceptance, and lessons learned in each country. The audience is invited to participate in the discussion.

NEDO Forum 2001. Session on advanced power generation and storage technology development; NEDO Forum 2001. Shindenryoku gijutsu kaihatsu session

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-09-20

The presentations made at the above-named session and remarks made at the panel discussion of the NEDO (New Energy and Industrial Technology Development Organization) forum held in Tokyo on September 20, 2001, are collected in this report. Predicted by Deputy Chairman Tanaka of International Superconductivity Technology Center in his lecture entitled 'Energy problem in IT (information technology) oriented society' were that possibilities were high that power consumption would rapidly increase in line with the progress of broad band and wireless, that energy conservation and environmental technologies should be developed urgently, and that superconductivity technology would assume an important role. Discussed at the panel on 'Prospect of distributed power sources in power systems' were 'Power utilization by information communication in IT-oriented days and needs for development,' 'Energy utilization involving buildings and needs for development,' 'Tasks to discharge in cogeneration technology development and coordination with power systems,' 'Technical problems involving interconnection of distributed power sources and needs for development,' 'Present state of distributed power sources and needs for development,' and 'From Fuel and Storage Technology Development Department to Advanced Power Generation and Storage Technology Development Department.' (NEDO)

78 FR 5778 - North American Free Trade Agreement (NAFTA), Article 1904 Binational Panel Reviews

Science.gov (United States)

2013-01-28

... DEPARTMENT OF COMMERCE International Trade Administration North American Free Trade Agreement (NAFTA), Article 1904 Binational Panel Reviews AGENCY: NAFTA Secretariat, United States Section... the Panel Order and Rule 80 of the Article 1904 Panel Rules, the Panel Review was completed and the...

Illustrating the body: Cross-sectional and prospective investigations of the impact of life drawing sessions on body image.

Science.gov (United States)

Swami, Viren

2016-01-30

Life drawing sessions, where individuals produce drawings of the human figure from observations of a live model, may contain embodying elements that promote healthier body image. Two pilot studies were conducted to test this hypothesis. In Study 1, 138 individuals recruited from life drawing sessions in London, UK, estimated how many sessions they had attended in their lifetime and completed measures of negative and positive body image. In women, greater attendance was significantly associated with higher body appreciation and lower drive for thinness and social physique anxiety. In men, greater attendance was significantly associated with higher body appreciation, but not drive for muscularity or social physique anxiety. In Study 2, 37 women took part in a life drawing session for the first time. Compared to pre-session scores, participants had significantly more positive state body image and appearance satisfaction after the session. The findings of these studies suggest that life drawing may promote healthier body image, particularly among women, but further research is needed. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

77 FR 74174 - North American Free Trade Agreement (NAFTA), Article 1904 Binational Panel Reviews

Science.gov (United States)

2012-12-13

... DEPARTMENT OF COMMERCE International Trade Administration North American Free Trade Agreement (NAFTA), Article 1904 Binational Panel Reviews AGENCY: NAFTA Secretariat, United States Section.... Therefore, on the basis of the Panel Order and Rule 80 of the Article 1904 Panel Rules, the Panel Review was...

Implementation of a panel of service users for the evaluation of mental health outpatient services.

Science.gov (United States)

Perreault, Michel; Renaud, Jeff; Bourassa, Francine; Beauchesne, Louise; Mpiana, André; Bernier, Sylvain; Milton, Diana

2010-12-01

The purpose of this study is to describe the experience of a standing panel of psychiatric outpatients over a period of five years. The procedure is used as a complementary method to assess client satisfaction regarding services provided by a Montreal psychiatric institute. During this period, 13 meetings were held, involving a total of 22 patients as active members of the panel. These sessions allowed 11 decision makers of the institute to consult the panel regarding various topics such as service organization, quality of services, and client information. In a context of internal evaluation, by giving direct and rapid access to service users' perspectives on key issues regarding service provision, the panel appeared to be a practical procedure for use in complement with other satisfaction assessment methods. Unplanned effects included the recruitment of participants as patient representatives on different hospital committees and associations, and as presenters in conferences and congresses.

37 CFR 251.2 - Purpose of Copyright Arbitration Royalty Panels.

Science.gov (United States)

2010-07-01

... carrier royalty fees and digital audio recording devices and media payments deposited with the Register of... Arbitration Royalty Panels. 251.2 Section 251.2 Patents, Trademarks, and Copyrights COPYRIGHT OFFICE, LIBRARY OF CONGRESS COPYRIGHT ARBITRATION ROYALTY PANEL RULES AND PROCEDURES COPYRIGHT ARBITRATION ROYALTY...

Session-RPE for quantifying the load of different youth basketball training sessions.

Science.gov (United States)

Lupo, C; Tessitore, A; Gasperi, L; Gomez, Mar

2017-03-01

The aim of the study was to evaluate youth basketball training, verifying the reliability of the session-RPE method in relation to session duration (session) categories. Six male youth basketball players (age, 16.5±0.5 years; height, 195.5±6.75 cm; body mass, 93.9±10.9 kg; and body mass index, 23.6±2.8 kg.m -2 ) were monitored (HR, type and duration of workouts) during 15 (66 individual) training sessions (80±26 minutes). Edwards' HR method was used as a reference measure of internal training load (ITL); the CR-10 RPE scale was administered 30 minutes after the end of each session. The results obtained showed that all comparisons between different session durations and workout portions revealed effects in term of Edwards' ITLs except for warm-up portions. Moderate to strong relationships between Edwards' and session- RPE methods emerged for all sessions (r = .85, P sessions (r range = .79 - .95, P session durations (session-RPE to monitor the ITL, regardless of session durations and workout portions.

MO-E-BRB-00: PANEL DISCUSSION: SBRT/SRS Case Studies - Lung

Energy Technology Data Exchange (ETDEWEB)

NONE

2016-06-15

In this interactive session, lung SBRT patient cases will be presented to highlight real-world considerations for ensuring safe and accurate treatment delivery. An expert panel of speakers will discuss challenges specific to lung SBRT including patient selection, patient immobilization techniques, 4D CT simulation and respiratory motion management, target delineation for treatment planning, online treatment alignment, and established prescription regimens and OAR dose limits. Practical examples of cases, including the patient flow thought the clinical process are presented and audience participation will be encouraged. This panel session is designed to provide case demonstration and review for lung SBRT in terms of (1) clinical appropriateness in patient selection, (2) strategies for simulation, including 4D and respiratory motion management, and (3) applying multi imaging modality (4D CT imaging, MRI, PET) for tumor volume delineation and motion extent, and (4) image guidance in treatment delivery. Learning Objectives: Understand the established requirements for patient selection in lung SBRT Become familiar with the various immobilization strategies for lung SBRT, including technology for respiratory motion management Understand the benefits and pitfalls of applying multi imaging modality (4D CT imaging, MRI, PET) for tumor volume delineation and motion extent determination for lung SBRT Understand established prescription regimes and OAR dose limits.

Mathematics Intensive Summer Session (MISS). Final technical report

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-11-01

This final technical report appears in two parts: the report for the 1995 summer MISS program and the report for the 1996 summer MISS program. Copies of the US Department of Energy Pre-Freshman Enrichment Program 1995 Entry Form and 1996 Entry Form completed by all participants were sent to the Oak Ridge Institute for Science and Education in the fall of 1995 and 1996 respectively. Those forms are on file should they be needed. Attached also is a copy of the Summary of ideas for panel discussions, problem-solving sessions, or small group discussions presented at the Department of Energy Oak Ridge Institute for Science and Education Pre-Freshman Enrichment Program Project Directors Meeting held in San Antonio, TX, November 12--14, 1995.

Promoting business and entrepreneurial awareness in health care professionals: lessons from venture capital panels at medicine 2.0 conferences.

Science.gov (United States)

Miron-Shatz, Talya; Shatz, Itamar; Becker, Stefan; Patel, Jigar; Eysenbach, Gunther

2014-08-06

There are few mechanisms that bring the academic and business worlds together in a way that would maximize the success of health technology (health tech) start-ups by increasing researchers' knowledge about how to operate in the business world. Existing solutions (eg, technology transfer offices and dual degree MD/MBA programs) are often unavailable to researchers from outside the institution or to those who have already completed their primary education, such as practicing physicians. This paper explores current solutions and offers a partial solution: include venture capital (VC) panels in medical conferences. These VC panels educate academics on 2 important and interconnected issues: how to "pitch" their ideas in the business world and what to consider when creating a company. In these sessions, academia-based start-up companies present their ideas before a VC panel composed of professional investors and receive feedback on their idea, business plan, and presentation techniques. Recent panel recommendations from Medicine 2.0 conferences fell into 7 categories: (1) the product, service, or idea you are developing into a company, (2) determine market forces and identify the target audience, (3) describe your competitive advantage, (4) the business plan, (5) current and future resources and capabilities, (6) legal aspects, and (7) general advice on the art of pitching. The academic and business literature validates many of these recommendations suggesting that VC panels may be a viable and cost-effective introduction to business and entrepreneurial education for physicians and other health care professionals. Panels benefit not only the presenting companies, but also the physicians, psychologists, and other health care professionals attending the session. Incorporating VC panels into academic conferences might also illuminate the need for incorporating relevant business training within academia.

Promoting Business and Entrepreneurial Awareness in Health Care Professionals: Lessons From Venture Capital Panels at Medicine 2.0 Conferences

Science.gov (United States)

Patel, Jigar; Eysenbach, Gunther

2014-01-01

There are few mechanisms that bring the academic and business worlds together in a way that would maximize the success of health technology (health tech) start-ups by increasing researchers’ knowledge about how to operate in the business world. Existing solutions (eg, technology transfer offices and dual degree MD/MBA programs) are often unavailable to researchers from outside the institution or to those who have already completed their primary education, such as practicing physicians. This paper explores current solutions and offers a partial solution: include venture capital (VC) panels in medical conferences. These VC panels educate academics on 2 important and interconnected issues: how to “pitch” their ideas in the business world and what to consider when creating a company. In these sessions, academia-based start-up companies present their ideas before a VC panel composed of professional investors and receive feedback on their idea, business plan, and presentation techniques. Recent panel recommendations from Medicine 2.0 conferences fell into 7 categories: (1) the product, service, or idea you are developing into a company, (2) determine market forces and identify the target audience, (3) describe your competitive advantage, (4) the business plan, (5) current and future resources and capabilities, (6) legal aspects, and (7) general advice on the art of pitching. The academic and business literature validates many of these recommendations suggesting that VC panels may be a viable and cost-effective introduction to business and entrepreneurial education for physicians and other health care professionals. Panels benefit not only the presenting companies, but also the physicians, psychologists, and other health care professionals attending the session. Incorporating VC panels into academic conferences might also illuminate the need for incorporating relevant business training within academia. PMID:25100579

Calculation of deflection for cross laminated timber floor panel

Directory of Open Access Journals (Sweden)

Kozarić Ljiljana M.

2016-01-01

Full Text Available In this paper analytically calculated values of effective flexural stiffness and deflections of five-layer CLT panels height 14 cm due to the payload defined in Eurocode 1 for floors in residential buildings are compared. Effective flexural stiffness was calculated using Gamma method, K-method and Kreuzinger's analogy. Three floor panels with identical height but with different combinations of lamination thicknesses in cross-layers were analyzed. The panels are 4.5 meters long and 1 meter wide. Lamination thicknesses in cross-sections of panels are 33,4 cm+21,9 cm, then 33 cm+22,5 cm and 52,8 cm.

50 CFR 697.21 - Gear identification and marking, escape vent, maximum trap size, and ghost panel requirements.

Science.gov (United States)

2010-10-01

... vent, maximum trap size, and ghost panel requirements. 697.21 Section 697.21 Wildlife and Fisheries... identification and marking, escape vent, maximum trap size, and ghost panel requirements. (a) Gear identification... Administrator finds to be consistent with paragraph (c) of this section. (d) Ghost panel. (1) Lobster traps not...

Post-Session Authentication

DEFF Research Database (Denmark)

Ahmed, Naveed; Jensen, Christian D.

2012-01-01

Entity authentication provides confidence in the claimed identity of a peer entity, but the manner in which this goal is achieved results in different types of authentication. An important factor in this regard is the order between authentication and the execution of the associated session....... In this paper, we consider the case of post-session authentication, where parties authenticate each other at the end of their interactive session. This use of authentication is different from session-less authentication (e.g., in RFID) and pre-session authentication (e.g., for access control.) Post......-session authentication, although a new term, is not a new concept; it is the basis of at least a few practical schemes. We, for the first time, systematically study it and present the underlying authentication model. Further, we show that an important class of problems is solvable using post-session authentication...

Solar Array Panels With Dust-Removal Capability

Science.gov (United States)

Dawson, Stephen; Mardesich, Nick; Spence, Brian; White, Steve

2004-01-01

It has been proposed to incorporate piezoelectric vibrational actuators into the structural supports of solar photovoltaic panels, for the purpose of occasionally inducing vibrations in the panels in order to loosen accumulated dust. Provided that the panels were tilted, the loosened dust would slide off under its own weight. Originally aimed at preventing obscuration of photovoltaic cells by dust accumulating in the Martian environment, the proposal may also offer an option for the design of solar photovoltaic panels for unattended operation at remote locations on Earth. The figure depicts a typical lightweight solar photovoltaic panel comprising a backside grid of structural spars that support a thin face sheet that, in turn, supports an array of photovoltaic cells on the front side. The backside structure includes node points where several spars intersect. According to the proposal, piezoelectric buzzers would be attached to the node points. The process of designing the panel would be an iterative one that would include computational simulation of the vibrations by use of finite- element analysis to guide the selection of the vibrational frequency of the actuators and the cross sections of the spars to maximize the agitation of dust.

Experience with citizens panels

International Nuclear Information System (INIS)

Selwyn, J.

2002-01-01

In May 1999, 200 delegates attended a four-day UK Consensus Conference on radioactive waste management, which was organised by the UK Centre for Economic and Environmental Development (UK CEED) and supported by the government, industry and environmental groups. The event brought together a Citizens' Panel of fifteen people, randomly selected to represent a cross section of the British public, together with the major players in the debate. The four-day conference saw the panel cross-examine expert witnesses from organisations such as NIREX, British Nuclear Fuels Limited, the Ministry of Defence, Greenpeace and Friends of the Earth. The findings of their investigations were put together in a report containing detailed recommendations for government and industry and presented to the Minister on the final day. (author)

Neutron cross section standards for the energy region above 20 MeV

International Nuclear Information System (INIS)

1991-01-01

These proceedings of a specialists' meeting on Neutron cross section standards for the energy region above 20 MeV are divided into 6 sessions bearing on: - session 1: status of the date base for (n-p) scattering (2 conferences) - session 2: status of nucleon-nucleon phase shift calculations (1 conference) - session 3: recent and planned experimental work on n-p cross section measurements and facilities (7 conferences) - session 4: Instruments for utilizing the H (n.n) standard for neutron fluence measurement (4 conferences) - session 5: proposal for other neutron cross-section standards (4 conferences) - session 6: monitor reactions for radiation dosimetry (3 conferences)

FDI and Income Inequality: Evidence from a Panel of US States

OpenAIRE

Pandej Chintrakarn; Dierk Herzer; Peter Nunnenkamp

2010-01-01

This study employs state-level panel data to explore the relationship between inward foreign direct investment (FDI) and income inequality in the United States. Using panel cointegration techniques that allow for cross-sectional heterogeneity, cross-sectional dependence, and endogenous regressors, we find that the short-run effects of FDI on income inequality are insignificant or weakly significant and negative. In the long run, however, FDI exerts a significant and robust negative effect on ...

98th LHCC meeting Agenda OPEN Session and CLOSED Session

CERN Document Server

CERN. Geneva

2009-01-01

OPEN Session on Wednesday, 8 July at 9h00-11h00 in Main Auditorium, Live webcast, followed by CLOSED Session, Conference room 160-1-009 11h20-17h00. CLOSED Session continued on Thursday, 9 July at 9h00-12h30

The Management of Information & Knowledge; Meeting of the Panel on Science and Technology with the Committee on Science and Astronautics, U.S. House of Representatives.

Science.gov (United States)

Congress of the U.S., Washington, DC. House Committee on Science and Technology.

The emphasis of the eleventh meeting of the Panel on Science and Technology was on the management of information and knowledge. It was organized essentially as a seminar with two papers given at each session. The topic of the first two papers presented was: "Computers, Communications, and the Economy." The papers given at the second session were…

Session-RPE for quantifying the load of different youth basketball training sessions

Directory of Open Access Journals (Sweden)

C Lupo

2016-12-01

Full Text Available The aim of the study was to evaluate youth basketball training, verifying the reliability of the session-RPE method in relation to session duration (< and ≥ 80 minutes and workout typology (reduced and high warm-up, conditioning, technical, tactical, game portions within a single session categories. Six male youth basketball players (age, 16.5±0.5 years; height, 195.5±6.75 cm; body mass, 93.9±10.9 kg; and body mass index, 23.6±2.8 kg.m-2 were monitored (HR, type and duration of workouts during 15 (66 individual training sessions (80±26 minutes. Edwards’ HR method was used as a reference measure of internal training load (ITL; the CR-10 RPE scale was administered 30 minutes after the end of each session. The results obtained showed that all comparisons between different session durations and workout portions revealed effects in term of Edwards’ ITLs except for warm-up portions. Moderate to strong relationships between Edwards’ and session- RPE methods emerged for all sessions (r = .85, P < .001, player’s sessions (r range = .79 - .95, P < .001, session durations (< 80 minutes: r = .67, P < .001; ≥ 80 minutes: r = .75, P < .001, and workout portions (r range = .78 - .89, P range = .002 - < .001. The findings indicated that coaches of youth basketball players can successfully use session-RPE to monitor the ITL, regardless of session durations and workout portions.

50 CFR 600.755 - Establishment of a fishery negotiation panel.

Science.gov (United States)

2010-10-01

... 50 Wildlife and Fisheries 8 2010-10-01 2010-10-01 false Establishment of a fishery negotiation panel. 600.755 Section 600.755 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT, NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE MAGNUSON-STEVENS ACT PROVISIONS Fishery Negotiation Panels § 600.755 Establishment of a...

78 FR 17639 - North American Free Trade Agreement (NAFTA), Article 1904 Binational Panel Reviews

Science.gov (United States)

2013-03-22

... DEPARTMENT OF COMMERCE International Trade Administration North American Free Trade Agreement (NAFTA), Article 1904 Binational Panel Reviews AGENCY: NAFTA Secretariat, United States Section... Order and Rule 80 of the Article 1904 Panel Rules, the Panel Review was completed and the panelists were...

78 FR 10600 - North American Free Trade Agreement (NAFTA), Article 1904 Binational Panel Reviews

Science.gov (United States)

2013-02-14

... DEPARTMENT OF COMMERCE International Trade Administration North American Free Trade Agreement (NAFTA), Article 1904 Binational Panel Reviews AGENCY: NAFTA Secretariat, United States Section... Order and Rule 80 of the Article 1904 Panel Rules, the Panel Review was completed and the panelists were...

78 FR 11627 - North American Free Trade Agreement (NAFTA), Article 1904 Binational Panel Reviews

Science.gov (United States)

2013-02-19

... DEPARTMENT OF COMMERCE International Trade Administration North American Free Trade Agreement (NAFTA), Article 1904 Binational Panel Reviews AGENCY: NAFTA Secretariat, United States Section... Order and Rule 80 of the Article 1904 Panel Rules, the Panel Review was completed and the panelists were...

77 FR 72325 - North American Free Trade Agreement (NAFTA), Article 1904 Binational Panel Reviews

Science.gov (United States)

2012-12-05

... DEPARTMENT OF COMMERCE International Trade Administration North American Free Trade Agreement (NAFTA), Article 1904 Binational Panel Reviews AGENCY: NAFTA Secretariat, United States Section... Order and Rule 80 of the Article 1904 Panel Rules, the Panel Review was completed and the panelists were...

75 FR 13494 - North American Free-Trade Agreement, Article 1904; NAFTA Panel Reviews; Request for Panel Review

Science.gov (United States)

2010-03-22

... DEPARTMENT OF COMMERCE International Trade Administration North American Free-Trade Agreement... Secretariat pursuant to Article 1904 of the North American Free Trade Agreement. Panel Review was requested of... Section, International Trade Administration, Department of Commerce. ACTION: Notice of First Request for...

The 24th National Session of Scientific Communications. Abstracts

International Nuclear Information System (INIS)

1998-01-01

The 24th National Session of Scientific Communications was held on 7-9 October, 1998 in Caciulata-Valcea, Romania. The Session covered the following research fields: 1. organic and technological chemistry; 2. inorganic and technological chemistry; 3. polymer chemistry and technology; 4. chemical engineering; 5. environment protection. The section 2 contains two communications referring to 99m Tc-ROMTEC generator and the Romanian production of radioactive labelled products. The section 3 contains a study on polymer radiolysis investigated by computational methods. The following section referring to chemical engineering contains a study of surface science in heavy water facilities, an investigation of corrosion process in CANDU steam generator components and of oxidation in zircaloy-4 tubes, a report referring to o-xylene deuteration technology and a report on 15 N separation by isotopic exchange. Finally, the environment protection section contains a paper reporting on retaining process of UO 3 3+ from uranium in exhausted reactor waters. Proceedings of a poster section are also included. Abstracts of papers on the following items are given: radioluminescent composite materials, radiochemical compatibility of polymers, gamma irradiation effects on elution polymers used in the production of 99m Tc generator, obtaining tritium and deuterium labelled polyacrylic acid and radioinduced grafting of acrylic acid

Panel discussion. Session 1

International Nuclear Information System (INIS)

Rodgers, B.R.

1986-01-01

An attempt is made to identify problems that need research and development work in order to advance low-level radioactive waste technology and to put the industry in a better position in five to ten years, or even twenty-five years from now. Attention is focused on disposal methods, operating procedures, the effects of the establishment of the state compact, and de minimis criteria

Panel data analysis of cardiotocograph (CTG) data.

Science.gov (United States)

Horio, Hiroyuki; Kikuchi, Hitomi; Ikeda, Tomoaki

2013-01-01

Panel data analysis is a statistical method, widely used in econometrics, which deals with two-dimensional panel data collected over time and over individuals. Cardiotocograph (CTG) which monitors fetal heart rate (FHR) using Doppler ultrasound and uterine contraction by strain gage is commonly used in intrapartum treatment of pregnant women. Although the relationship between FHR waveform pattern and the outcome such as umbilical blood gas data at delivery has long been analyzed, there exists no accumulated FHR patterns from large number of cases. As time-series economic fluctuations in econometrics such as consumption trend has been studied using panel data which consists of time-series and cross-sectional data, we tried to apply this method to CTG data. The panel data composed of a symbolized segment of FHR pattern can be easily handled, and a perinatologist can get the whole FHR pattern view from the microscopic level of time-series FHR data.

The Efficiency of Split Panel Designs in an Analysis of Variance Model

Science.gov (United States)

Wang, Wei-Guo; Liu, Hai-Jun

2016-01-01

We consider split panel design efficiency in analysis of variance models, that is, the determination of the cross-sections series optimal proportion in all samples, to minimize parametric best linear unbiased estimators of linear combination variances. An orthogonal matrix is constructed to obtain manageable expression of variances. On this basis, we derive a theorem for analyzing split panel design efficiency irrespective of interest and budget parameters. Additionally, relative estimator efficiency based on the split panel to an estimator based on a pure panel or a pure cross-section is present. The analysis shows that the gains from split panel can be quite substantial. We further consider the efficiency of split panel design, given a budget, and transform it to a constrained nonlinear integer programming. Specifically, an efficient algorithm is designed to solve the constrained nonlinear integer programming. Moreover, we combine one at time designs and factorial designs to illustrate the algorithm’s efficiency with an empirical example concerning monthly consumer expenditure on food in 1985, in the Netherlands, and the efficient ranges of the algorithm parameters are given to ensure a good solution. PMID:27163447

Session-RPE for quantifying load of different youth taekwondo training sessions.

Science.gov (United States)

Lupo, Corrado; Capranica, Laura; Cortis, Cristina; Guidotti, Flavia; Bianco, Antonino; Tessitore, Antonio

2017-03-01

The session rating of perceived exertion (session-RPE) proved to be a valuable method to quantify the internal training load (ITL) in taekwondo. However, no study validated this method in youth taekwondo athletes performing different training sessions. Thus this study aimed at evaluating the reliability of the session-RPE to monitor the ITL of prepubescent taekwondo athletes during pre-competitive (PC) and competitive (C) training sessions. Five female (age: 12.0±0.7 y; height: 1.54±0.08 m; body mass: 48.8±7.3 kg) and four male (age: 12.0±0.8 yrs; height: 1.55±0.07 m; body mass: 47.3±5.3 kg) taekwondo athletes were monitored during 100 individual sessions (PC: N.=33; C: N.=67). The Edwards' HR method was used as reference measure of ITL; the CR-10 RPE scale was administered at 1- and 30-minutes from the end of each session. No difference for gender emerged. The ITLs of C (Edwards: 228±40 arbitrary units, AU) resulted higher than that of PC (192±26 AU; P=0.04). Although all training typologies and data collections achieved significant correlations between Edwards' and session-RPE methods, a large relationship (r =0.71, Psessions evaluated at 30 minutes of the recovery phases. Findings support coaches of prepubescent taekwondo athletes to successfully use session-RPE to monitor the ITL of different training typologies. However, PC training evaluated at 30 minutes of the recovery phase represents the best condition for a highly reliable ITL perception.

Scattering Effects of Solar Panels on Space Station Antenna Performance

Science.gov (United States)

Panneton, Robert J.; Ngo, John C.; Hwu, Shian U.; Johnson, Larry A.; Elmore, James D.; Lu, Ba P.; Kelley, James S.

1994-01-01

Characterizing the scattering properties of the solar array panels is important in predicting Space Station antenna performance. A series of far-field, near-field, and radar cross section (RCS) scattering measurements were performed at S-Band and Ku-Band microwave frequencies on Space Station solar array panels. Based on investigation of the measured scattering patterns, the solar array panels exhibit similar scattering properties to that of the same size aluminum or copper panel mockup. As a first order approximation, and for worse case interference simulation, the solar array panels may be modeled using perfect reflecting plates. Numerical results obtained using the Geometrical Theory of Diffraction (GTD) modeling technique are presented for Space Station antenna pattern degradation due to solar panel interference. The computational and experimental techniques presented in this paper are applicable for antennas mounted on other platforms such as ship, aircraft, satellite, and space or land vehicle.

Assessing treatment integrity in cognitive-behavioral therapy: comparing session segments with entire sessions.

Science.gov (United States)

Weck, Florian; Grikscheit, Florian; Höfling, Volkmar; Stangier, Ulrich

2014-07-01

The evaluation of treatment integrity (therapist adherence and competence) is a necessary condition to ensure the internal and external validity of psychotherapy research. However, the evaluation process is associated with high costs, because therapy sessions must be rated by experienced clinicians. It is debatable whether rating session segments is an adequate alternative to rating entire sessions. Four judges evaluated treatment integrity (i.e., therapist adherence and competence) in 84 randomly selected videotapes of cognitive-behavioral therapy for major depressive disorder, social anxiety disorder, and hypochondriasis (from three different treatment outcome studies). In each case, two judges provided ratings based on entire therapy sessions and two on session segments only (i.e., the middle third of the entire sessions). Interrater reliability of adherence and competence evaluations proved satisfactory for ratings based on segments and the level of reliability did not differ from ratings based on entire sessions. Ratings of treatment integrity that were based on entire sessions and session segments were strongly correlated (r=.62 for adherence and r=.73 for competence). The relationship between treatment integrity and outcome was comparable for ratings based on session segments and those based on entire sessions. However, significant relationships between therapist competence and therapy outcome were only found in the treatment of social anxiety disorder. Ratings based on segments proved to be adequate for the evaluation of treatment integrity. The findings demonstrate that session segments are an adequate and cost-effective alternative to entire sessions for the evaluation of therapist adherence and competence. Copyright © 2014. Published by Elsevier Ltd.

50 CFR 600.754 - Decision to establish a fishery negotiation panel.

Science.gov (United States)

2010-10-01

... 50 Wildlife and Fisheries 8 2010-10-01 2010-10-01 false Decision to establish a fishery negotiation panel. 600.754 Section 600.754 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT, NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE MAGNUSON-STEVENS ACT PROVISIONS Fishery Negotiation Panels § 600.754 Decision to...

TU-A-BRB-02: Panel Member

International Nuclear Information System (INIS)

Ma, L.

2016-01-01

Brain stereotactic radiosurgery (SRS) and spine stereotactic body radiation therapy (SBRT) are commonly treated by a multidisciplinary team of neurosurgeons, radiation oncologists, and medical physicists. However the treatment objectives, constraints, and technical considerations involved can be quite different between the two techniques. In this interactive session an expert panel of speakers will present clinical brain SRS and spine SBRT cases in order to demonstrate real-world considerations for ensuring safe and accurate treatment delivery and to highlight the significant differences in approach for each treatment site. The session will include discussion of topic such as clinical indications, immobilization, target definition, normal tissue tolerance limits, and beam arrangements. Learning Objectives: Understand the differences in indications and dose/fractionation strategies for intracranial SRS and spine SBRT. Describe the different treatment modalities which can be used to deliver intracranial SRS and spine SBRT. Cite the major differences in treatment setup and delivery principles between intracranial and spine treatments. Identify key critical structures and clinical dosimetric tolerance levels for spine SBRT and intracranial SRS. Understand areas of ongoing work to standardize intracranial SRS and spine SBRT procedures. Schlesinger: Research support: Elekta Instruments, AB; D. Schlesinger, Elekta Instruments, AB - research support; B. Winey, No relevant external funding for this subject.

TU-A-BRB-03: Panel Member

International Nuclear Information System (INIS)

Winey, B.

2016-01-01

Brain stereotactic radiosurgery (SRS) and spine stereotactic body radiation therapy (SBRT) are commonly treated by a multidisciplinary team of neurosurgeons, radiation oncologists, and medical physicists. However the treatment objectives, constraints, and technical considerations involved can be quite different between the two techniques. In this interactive session an expert panel of speakers will present clinical brain SRS and spine SBRT cases in order to demonstrate real-world considerations for ensuring safe and accurate treatment delivery and to highlight the significant differences in approach for each treatment site. The session will include discussion of topic such as clinical indications, immobilization, target definition, normal tissue tolerance limits, and beam arrangements. Learning Objectives: Understand the differences in indications and dose/fractionation strategies for intracranial SRS and spine SBRT. Describe the different treatment modalities which can be used to deliver intracranial SRS and spine SBRT. Cite the major differences in treatment setup and delivery principles between intracranial and spine treatments. Identify key critical structures and clinical dosimetric tolerance levels for spine SBRT and intracranial SRS. Understand areas of ongoing work to standardize intracranial SRS and spine SBRT procedures. Schlesinger: Research support: Elekta Instruments, AB; D. Schlesinger, Elekta Instruments, AB - research support; B. Winey, No relevant external funding for this subject.

TU-A-BRB-02: Panel Member

Energy Technology Data Exchange (ETDEWEB)

Ma, L. [UCSF Comprehensive Cancer Center (United States)

2016-06-15

Brain stereotactic radiosurgery (SRS) and spine stereotactic body radiation therapy (SBRT) are commonly treated by a multidisciplinary team of neurosurgeons, radiation oncologists, and medical physicists. However the treatment objectives, constraints, and technical considerations involved can be quite different between the two techniques. In this interactive session an expert panel of speakers will present clinical brain SRS and spine SBRT cases in order to demonstrate real-world considerations for ensuring safe and accurate treatment delivery and to highlight the significant differences in approach for each treatment site. The session will include discussion of topic such as clinical indications, immobilization, target definition, normal tissue tolerance limits, and beam arrangements. Learning Objectives: Understand the differences in indications and dose/fractionation strategies for intracranial SRS and spine SBRT. Describe the different treatment modalities which can be used to deliver intracranial SRS and spine SBRT. Cite the major differences in treatment setup and delivery principles between intracranial and spine treatments. Identify key critical structures and clinical dosimetric tolerance levels for spine SBRT and intracranial SRS. Understand areas of ongoing work to standardize intracranial SRS and spine SBRT procedures. Schlesinger: Research support: Elekta Instruments, AB; D. Schlesinger, Elekta Instruments, AB - research support; B. Winey, No relevant external funding for this subject.

TU-A-BRB-03: Panel Member

Energy Technology Data Exchange (ETDEWEB)

Winey, B. [Massachusetts General Hospital (United States)

2016-06-15

Brain stereotactic radiosurgery (SRS) and spine stereotactic body radiation therapy (SBRT) are commonly treated by a multidisciplinary team of neurosurgeons, radiation oncologists, and medical physicists. However the treatment objectives, constraints, and technical considerations involved can be quite different between the two techniques. In this interactive session an expert panel of speakers will present clinical brain SRS and spine SBRT cases in order to demonstrate real-world considerations for ensuring safe and accurate treatment delivery and to highlight the significant differences in approach for each treatment site. The session will include discussion of topic such as clinical indications, immobilization, target definition, normal tissue tolerance limits, and beam arrangements. Learning Objectives: Understand the differences in indications and dose/fractionation strategies for intracranial SRS and spine SBRT. Describe the different treatment modalities which can be used to deliver intracranial SRS and spine SBRT. Cite the major differences in treatment setup and delivery principles between intracranial and spine treatments. Identify key critical structures and clinical dosimetric tolerance levels for spine SBRT and intracranial SRS. Understand areas of ongoing work to standardize intracranial SRS and spine SBRT procedures. Schlesinger: Research support: Elekta Instruments, AB; D. Schlesinger, Elekta Instruments, AB - research support; B. Winey, No relevant external funding for this subject.

TU-A-BRB-01: Panel Member

Energy Technology Data Exchange (ETDEWEB)

Schlesinger, D. [University of Virginia Health Systems (United States)

2016-06-15

Brain stereotactic radiosurgery (SRS) and spine stereotactic body radiation therapy (SBRT) are commonly treated by a multidisciplinary team of neurosurgeons, radiation oncologists, and medical physicists. However the treatment objectives, constraints, and technical considerations involved can be quite different between the two techniques. In this interactive session an expert panel of speakers will present clinical brain SRS and spine SBRT cases in order to demonstrate real-world considerations for ensuring safe and accurate treatment delivery and to highlight the significant differences in approach for each treatment site. The session will include discussion of topic such as clinical indications, immobilization, target definition, normal tissue tolerance limits, and beam arrangements. Learning Objectives: Understand the differences in indications and dose/fractionation strategies for intracranial SRS and spine SBRT. Describe the different treatment modalities which can be used to deliver intracranial SRS and spine SBRT. Cite the major differences in treatment setup and delivery principles between intracranial and spine treatments. Identify key critical structures and clinical dosimetric tolerance levels for spine SBRT and intracranial SRS. Understand areas of ongoing work to standardize intracranial SRS and spine SBRT procedures. Schlesinger: Research support: Elekta Instruments, AB; D. Schlesinger, Elekta Instruments, AB - research support; B. Winey, No relevant external funding for this subject.

TU-A-BRB-01: Panel Member

International Nuclear Information System (INIS)

Schlesinger, D.

2016-01-01

Brain stereotactic radiosurgery (SRS) and spine stereotactic body radiation therapy (SBRT) are commonly treated by a multidisciplinary team of neurosurgeons, radiation oncologists, and medical physicists. However the treatment objectives, constraints, and technical considerations involved can be quite different between the two techniques. In this interactive session an expert panel of speakers will present clinical brain SRS and spine SBRT cases in order to demonstrate real-world considerations for ensuring safe and accurate treatment delivery and to highlight the significant differences in approach for each treatment site. The session will include discussion of topic such as clinical indications, immobilization, target definition, normal tissue tolerance limits, and beam arrangements. Learning Objectives: Understand the differences in indications and dose/fractionation strategies for intracranial SRS and spine SBRT. Describe the different treatment modalities which can be used to deliver intracranial SRS and spine SBRT. Cite the major differences in treatment setup and delivery principles between intracranial and spine treatments. Identify key critical structures and clinical dosimetric tolerance levels for spine SBRT and intracranial SRS. Understand areas of ongoing work to standardize intracranial SRS and spine SBRT procedures. Schlesinger: Research support: Elekta Instruments, AB; D. Schlesinger, Elekta Instruments, AB - research support; B. Winey, No relevant external funding for this subject.

Formal description of the OSI session layer: session service

NARCIS (Netherlands)

van Sinderen, Marten J.; van Eijk, P.H.J.; Vissers, C.A.; Diaz, M.

1989-01-01

The LOTOS formal description of the OSI session service is presented on basis of specification samples from the full description, giving account of how specification styles and session service architectural elements are reflected in the description. Both information (data types) and process

Topical Session on the Decommissioning and Dismantling Safety Case

International Nuclear Information System (INIS)

2002-01-01

practices is low, the idea being that it is important to understand differences in approaches. Frances Taylor, Head of Radioactive Waste Management and Decommissioning Strategy Unit, HM Nuclear Installations Inspectorate, Health and Safety Executive, served as Session Chair. Scott Moore, Section Chief of the Special Projects section, U.S. Nuclear Regulatory Commission, served as the Rapporteur for the Topical Session. Presentations during the topical session covered key aspects of the safety case, including: - international requirements and guidance, - environmental impact assessment, - plant configuration and decommissioning and dismantling (D and D) licensing, - accident assessment, - balancing radiological and industrial risk, and - the safety case for safe store and dormancy periods. At the end of each presentation time was allotted for discussion of the paper. Integral to the Topical Session was a facilitated plenary discussion on the topical issues identified above. The Rapporteur briefly reviewed the main points at the end of the topical session. The Topical Session is documented as follows. First a summary of the presentations is given along with the questions that were asked of each speaker; then follow a summary of the plenary discussions and the main points made. The extended abstracts or full papers supporting each presentation are given in Appendix 1. As a follow-on to the Topical Session a Task Group has been constituted in order to propose to the WPDD a more detailed work programme in this area

75 FR 73090 - Medicare Program; Listening Session on Development of Additional Imaging Efficiency Measures for...

Science.gov (United States)

2010-11-29

...] Medicare Program; Listening Session on Development of Additional Imaging Efficiency Measures for Use in the...), HHS. ACTION: Notice of meeting. SUMMARY: This notice announces a listening session to receive comments... Quality Data Reporting Program (HOP QDRP), which is authorized under section 1833(t)(17) of the Social...

Energy Frontier Research Centers: A View from Senior EFRC Representatives (2011 EFRC Summit, panel session)

International Nuclear Information System (INIS)

Drell, Persis; Armstrong, Neal; Carter, Emily; DePaolo, Don; Gunnoe, Brent

2011-01-01

A distinguished panel of scientists from the EFRC community provide their perspective on the importance of EFRCs for addressing critical energy needs at the 2011 EFRC Summit. Persis Drell, Director at SLAC, served as moderator. Panel members are Neal Armstrong (Director of the Center for Interface Science: Solar Electric Materials, led by the University of Arizona), Emily Carter (Co-Director of the Combustion EFRC, led by Princeton University. She is also Team Leader of the Heterogeneous Functional Materials Center, led by the University of South Carolina), Don DePaolo (Director of the Center for Nanoscale Control of Geologic CO2, led by LBNL), and Brent Gunnoe (Director of the Center for Catalytic Hydrocarbon Functionalization, led by the University of Virginia). The 2011 EFRC Summit and Forum brought together the EFRC community and science and policy leaders from universities, national laboratories, industry and government to discuss 'Science for our Nation's Energy Future.' In August 2009, the Office of Science established 46 Energy Frontier Research Centers. The EFRCs are collaborative research efforts intended to accelerate high-risk, high-reward fundamental research, the scientific basis for transformative energy technologies of the future. These Centers involve universities, national laboratories, nonprofit organizations, and for-profit firms, singly or in partnerships, selected by scientific peer review. They are funded at $2 to $5 million per year for a total planned DOE commitment of $777 million over the initial five-year award period, pending Congressional appropriations. These integrated, multi-investigator Centers are conducting fundamental research focusing on one or more of several 'grand challenges' and use-inspired 'basic research needs' recently identified in major strategic planning efforts by the scientific community. The purpose of the EFRCs is to integrate the talents and expertise of leading scientists in a setting designed to accelerate

Photovoltaic panel clamp

Science.gov (United States)

Mittan, Margaret Birmingham [Oakland, CA; Miros, Robert H. J. [Fairfax, CA; Brown, Malcolm P [San Francisco, CA; Stancel, Robert [Loss Altos Hills, CA

2012-06-05

A photovoltaic panel clamp includes an upper and lower section. The interface between the assembled clamp halves and the module edge is filled by a flexible gasket material, such as EPDM rubber. The gasket preferably has small, finger like protrusions that allow for easy insertion onto the module edge while being reversed makes it more difficult to remove them from the module once installed. The clamp includes mounting posts or an integral axle to engage a bracket. The clamp also may include a locking tongue to secure the clamp to a bracket.

Generalized Dynamic Panel Data Models with Random Effects for Cross-Section and Time

NARCIS (Netherlands)

Mesters, G.; Koopman, S.J.

2014-01-01

An exact maximum likelihood method is developed for the estimation of parameters in a nonlinear non-Gaussian dynamic panel data model with unobserved random individual-specific and time-varying effects. We propose an estimation procedure based on the importance sampling technique. In particular, a

Cardiorespiratory responses of a dance session designed for older women: A cross sectional study.

Science.gov (United States)

Rodrigues-Krause, Josianne; Farinha, Juliano Boufleur; Ramis, Thiago Rozales; Boeno, Francesco Pinto; Dos Santos, Gabriela Cristina; Krause, Mauricio; Reischak-Oliveira, Alvaro

2018-06-04

Dancing has been increasingly used as a type of exercise intervention to improve cardiovascular fitness of older people. However, it is unclear which may be the exercise intensity of the dance sessions. To describe cardiorespiratory responses of a dance session for older women, and to identify intensity zones in relation to peak oxygen consumption (VO 2 peak), first and second ventilatory thresholds (VT1 and VT2). Ten women (66 ± 5 yrs., BMI 27 ± 4) were examined on three occasions: Familiarization, maximum effort and dance sessions. Incremental treadmill test: 5 km/h, 2% slope each min, until maximum effort. Dance class (60 min): warm-up (20 min), across-the-floor (10 min), choreography (15 min), show (10 min) and cool-down (5 min). Ventilatory parameters were measured continuously (breath-by-breath). VO 2 (mL·kg -1 ·min -1 ): Maximum effort: VO 2 peak (23.3 ± 4.3), VT1 (17.2 ± 3.5) and VT2 (20.9 ± 3.4). Dancing: warm-up (12.8 ± 2.4, ~55%VO 2 peak), across-the-floor (14.2 ± 2.4 ~62%VO 2 peak), choreography (14.6 ± 3.2 ~63%VO 2 peak) and show (16.1 ± 3.3, ~69% VO 2 peak). Show was similar to VT1. Cardiorespiratory demands of a dance class for older women are at low aerobic intensity. Show was similar to VT1, indicating that a dance class may be modulated to improve aerobic fitness, at least at initial stages of training. Copyright © 2018 Elsevier Inc. All rights reserved.

Post-Session Authentication

OpenAIRE

Ahmed , Naveed; Jensen , Christian ,

2012-01-01

Part 1: Full Papers; International audience; Entity authentication provides confidence in the claimed identity of a peer entity, but the manner in which this goal is achieved results in different types of authentication. An important factor in this regard is the order between authentication and the execution of the associated session. In this paper, we consider the case of post-session authentication, where parties authenticate each other at the end of their interactive session. This use of a...

50 CFR 600.756 - Conduct and operation of a fishery negotiation panel.

Science.gov (United States)

2010-10-01

... 50 Wildlife and Fisheries 8 2010-10-01 2010-10-01 false Conduct and operation of a fishery negotiation panel. 600.756 Section 600.756 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT, NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE MAGNUSON-STEVENS ACT PROVISIONS Fishery Negotiation Panels § 600.756 Conduct and...

General stability of composite panels reinforced with flexible rods taking account of the side boundary conditions

Science.gov (United States)

Dudchenko, A. A.; Elpat'evskii, A. N.

1995-07-01

Reinforced panels are the basic load-bearing elements of various structures. Optimization of massive structures requires consideration of deformation of the panel cross-sections. This is particularly important in determining the bearing strength at buckling. The load scheme, conditions for fixation of the panel cross-section, and bend-torsional stiffness taking account of the deformation of the rod cross-section affect the buckling load in real structures. The stress distribution prior to buckling must be known to solve the buckling problem properly. The stress in the panel is proportional to the active load. The stress distribution is assumed to be known according to our previous method [1]. The load scheme and panel dimensions are shown in Fig. 1. The stress distribution in the panel prior to buckling can be found using Eqs. (1)-(3). A view of the cross-section is given in Fig. 1. The displacements in the panel at buckling for the boundary area are found using Eqs. (4)-(6), while the stresses in the skin and stiffness are found using Eq. (7). Roots k1 and k2 are those of the characteristic equation and β is a dimensionless coordinate. The problem was solved using variational theory. The potential energy is given by Eqs. (8) and (9) by orihogonalization of Eqs. (5). The basic equations are converted to Eqs. (10) by evaluation of the components in Eqs. (8) and (9). Its calculation (11) gives the compression load. Optimization of parameter α gives the critical strength P1 = 6.93 kN (without taking account of the boundary area) and P2 = 5.31 kN (taking account of the boundary area).

76 FR 45555 - Nominations to the FIFRA Scientific Advisory Panel; Request for Comments

Science.gov (United States)

2011-07-29

... data of persons nominated to serve on the Scientific Advisory Panel (SAP) established under section 25... and the NSF nominate scientists to fill vacancies occurring on the Panel. The Agency requested... Health Science Advisor in the Division of Specialized Information Services at the National Library of...

16 CFR 500.21 - Type size in relationship to the area of the principal display panel.

Science.gov (United States)

2010-01-01

... principal display panel. 500.21 Section 500.21 Commercial Practices FEDERAL TRADE COMMISSION RULES... relationship to the area of the principal display panel. (a) The statement of net quantity of contents shall be... display panel of the package or commodity and shall be uniform for all packages or commodities of...

Regular Formal Evaluation Sessions are Effective as Frame-of-Reference Training for Faculty Evaluators of Clerkship Medical Students.

Science.gov (United States)

Hemmer, Paul A; Dadekian, Gregory A; Terndrup, Christopher; Pangaro, Louis N; Weisbrod, Allison B; Corriere, Mark D; Rodriguez, Rechell; Short, Patricia; Kelly, William F

2015-09-01

Face-to-face formal evaluation sessions between clerkship directors and faculty can facilitate the collection of trainee performance data and provide frame-of-reference training for faculty. We hypothesized that ambulatory faculty who attended evaluation sessions at least once in an academic year (attendees) would use the Reporter-Interpreter-Manager/Educator (RIME) terminology more appropriately than faculty who did not attend evaluation sessions (non-attendees). Investigators conducted a retrospective cohort study using the narrative assessments of ambulatory internal medicine clerkship students during the 2008-2009 academic year. The study included assessments of 49 clerkship medical students, which comprised 293 individual teacher narratives. Single-teacher written and transcribed verbal comments about student performance were masked and reviewed by a panel of experts who, by consensus, (1) determined whether RIME was used, (2) counted the number of RIME utterances, and (3) assigned a grade based on the comments. Analysis included descriptive statistics and Pearson correlation coefficients. The authors reviewed 293 individual teacher narratives regarding the performance of 49 students. Attendees explicitly used RIME more frequently than non-attendees (69.8 vs. 40.4 %; p sessions used RIME terminology more frequently and provided more accurate grade recommendations than teachers who did not attend. Formal evaluation sessions may provide frame-of-reference training for the RIME framework, a method that improves the validity and reliability of workplace assessment.

Panel 4 - applications to transportation

Energy Technology Data Exchange (ETDEWEB)

Nichols, F. [Argonne National Lab., IL (United States); Au, J. [Sundstrand Aerospace, Rockford, IL (United States); Bhattacharya, R. [Universal Energy Systems, Inc., Dayton, OH (United States); Bhushan, B. [Ohio State Univ., Columbus (United States); Blunier, D. [Caterpillar, Inc., Peoria, IL (United States); Boardman, B. [Deere & Co., Moline, IL (United States); Brombolich, L. [Compu-Tec Engineering, Chesterfield, MO (United States); Davidson, J. [Vanderbilt Univ., Nashville, TN (United States); Graham, M. [Northwestern Univ., Evanston, IL (United States); Hakim, N. [Detroit Diesel Corp., MI (United States); Harris, K. [Dubbeldee Harris Diamond Corp., Mt. Arlington, NJ (United States); Hay, R. [Norton Diamond Film, Northboro, MA (United States); Herk, L. [Southwest Research Inst., Southfield, MI (United States); Hojnacki, H.; Rourk, D. [Intelligent Structures Incorporated, Canton, MI (United States); Kamo, R. [Adiabatics, Inc., Columbus, IN (United States); Nieman, B. [Allied-Signal Inc., Des Plaines, IL (United States); O`Neill, D. [3M, St. Paul, MN (United States); Peterson, M.B. [Wear Sciences, Arnold, MD (United States); Pfaffenberger, G. [Allison Gas Turbine, Indianapolis, IN (United States); Pryor, R.W. [Wayne State Univ., Detroit, MI (United States); Russell, J. [Superconductivity Publications, Inc., Somerset, NJ (United States); Syniuta, W. [Advanced Mechanical Technology, Inc., Newton, MA (United States); Tamor, M. [Ford Motor Co., Dearborn, MI (United States); Vojnovich, T. [Dept. of Energy, Washington, DC (United States); Yarbrough, W. [Pennsylvania State Univ., University Park (United States); Yust, C.S. [Oak Ridge National Lab., TN (United States)

1993-01-01

The aim of this group was to compile a listing of current and anticipated future problem areas in the transportation industry where the properties of diamond and DLC films make them especially attractive and where the panel could strongly endorse the establishment of DOE/Transportation Industry cooperative research efforts. This section identifies the problem areas for possible applications of diamond/DLC technology and presents indications of current approaches to these problems.

Panel and planar experimental shear behavior of wood panels ...

African Journals Online (AJOL)

Panel shear strength along the thickness and planar shear along the length of wood panels laminated softwood oriented OSB 10 mm thick, conditioned at different moisture contents (anhydrous medium, ambient temperature and humid medium) was measured on standardized test specimens, cut in half lengthwise panel ...

77 FR 65864 - North American Free-Trade Agreement (NAFTA), Article 1904 Binational Panel Reviews

Science.gov (United States)

2012-10-31

... (NAFTA), Article 1904 Binational Panel Reviews AGENCY: NAFTA Secretariat, United States Section... law of the country that made the determination. Under Article 1904 of the Agreement, which came into... Government of Mexico established Rules of Procedure for Article 1904 Binational Panel Reviews (``Rules...

77 FR 74174 - North American Free-Trade Agreement (NAFTA), Article 1904 Binational Panel Reviews

Science.gov (United States)

2012-12-13

... (NAFTA), Article 1904 Binational Panel Reviews AGENCY: NAFTA Secretariat, United States Section... duty law of the country that made the determination. Under Article 1904 of the Agreement, which came... Government of Mexico established Rules of Procedure for Article 1904 Binational Panel Reviews (``Rules...

76 FR 4633 - North American Free-Trade Agreement (NAFTA), Article 1904 Binational Panel Reviews

Science.gov (United States)

2011-01-26

... (NAFTA), Article 1904 Binational Panel Reviews AGENCY: NAFTA Secretariat, United States Section... duty law of the country that made the determination. Under Article 1904 of the Agreement, which came... Government of Mexico established Rules of Procedure for Article 1904 Binational Panel Reviews (``Rules...

76 FR 14917 - North American Free-Trade Agreement (NAFTA), Article 1904 Binational Panel Reviews

Science.gov (United States)

2011-03-18

... (NAFTA), Article 1904 Binational Panel Reviews AGENCY: NAFTA Secretariat, United States Section... that made the determination. Under Article 1904 of the Agreement, which came into force on January 1... established Rules of Procedure for Article 1904 Binational Panel Reviews (``Rules''). These Rules were...

76 FR 56404 - North American Free-Trade Agreement (NAFTA), Article 1904 Binational Panel Reviews

Science.gov (United States)

2011-09-13

... (NAFTA), Article 1904 Binational Panel Reviews AGENCY: NAFTA Secretariat, United States Section... law of the country that made the determination. Under Article 1904 of the Agreement, which came into... Government of Mexico established Rules of Procedure for Article 1904 Binational Panel Reviews (``Rules...

Sessions and Separability in Security Protocols

DEFF Research Database (Denmark)

Carbone, Marco; Guttman, Joshua

2013-01-01

Despite much work on sessions and session types in non- adversarial contexts, session-like behavior given an active adversary has not received an adequate definition and proof methods. We provide a syntactic property that guarantees that a protocol has session-respecting executions. Any uncomprom......Despite much work on sessions and session types in non- adversarial contexts, session-like behavior given an active adversary has not received an adequate definition and proof methods. We provide a syntactic property that guarantees that a protocol has session-respecting executions. Any...

77 FR 48552 - Meetings of Humanities Panel

Science.gov (United States)

2012-08-14

... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: National Endowment for the Humanities. ACTION: Notice of meetings. SUMMARY: Pursuant to section 10(a)(2) of the Federal Advisory Committee Act (5 U.S.C. App.), notice is hereby given that 10 meetings of the Humanities...

78 FR 49550 - Meetings of Humanities Panel

Science.gov (United States)

2013-08-14

... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: National Endowment for the Humanities. ACTION: Notice of meetings. SUMMARY: Pursuant to section 10(a)(2) of the Federal Advisory Committee Act (5 U.S.C. App.), notice is hereby given that 11 meetings of the Humanities...

77 FR 75198 - Meetings of Humanities Panel

Science.gov (United States)

2012-12-19

... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: National Endowment for the Humanities. ACTION: Notice of meetings. SUMMARY: Pursuant to section 10(a)(2) of the Federal Advisory Committee Act (5 U.S.C. App.), notice is hereby given that 4 meetings of the Humanities...

Multiparty Asynchronous Session Types

DEFF Research Database (Denmark)

Honda, Kohei; Yoshida, Nobuko; Carbone, Marco

2016-01-01

. This work extends the foregoing theories of binary session types to multiparty, asynchronous sessions, which often arise in practical communication-centered applications. Presented as a typed calculus for mobile processes, the theory introduces a new notion of types in which interactions involving multiple......Communication is a central elements in software development. As a potential typed foundation for structured communication-centered programming, session types have been studied over the past decade for a wide range of process calculi and programming languages, focusing on binary (two-party) sessions...... peers are directly abstracted as a global scenario. Global types retain the friendly type syntax of binary session types while specifying dependencies and capturing complex causal chains of multiparty asynchronous interactions. A global type plays the role of a shared agreement among communication peers...

Optimum design of composite panel with photovoltaic-thermo module. Absorbing effect of cooling panel; Hikari netsu fukugo panel no saiteki sekkei. Reikyaku panel no kyunetsu koka

Energy Technology Data Exchange (ETDEWEB)

Sato, M; Kikuchi, S; Tani, T [Science University of Tokyo, Tokyo (Japan); Kadotani, K; Imaizumi, H [Komatsu Ltd., Tokyo (Japan)

1996-10-27

The composite panel with photovoltaic-thermo module becomes higher in energy-saving than the conventional air-conditioning system by the independent radiational heating and cooling effect obtained when the generating panel using a solar cell module is combined with the heating and cooling panel using a thermo-element module. The output of a solar cell module can be directly used because the solar cell module operates in AC. This paper reports the relation between the absorbed value and power consumption of the cooling panel, while paying attention to the cooling panel. The performance coefficient of the maximum absorbed value from an non-absorbing substance to a cooling panel is 2 to 3. Assume that the cooling panel during non-adiabatic operation is operated using a solar cell module of 800 W/m{sup 2} in solar intensity and 15% in conversion efficiency. The cooling-surface temperature difference is 12.12 K, and the maximum absorbed value of a non-absorbing substance to a cooling panel is 39.12 W/m{sup 2}. The absorbed value of the outer temperature to the cooling panel is 74.4 W/m{sup 2}, and each performance coefficient is 3.26 and 0.62. The absorbed value must be calculated for evaluation from the cooling-surface temperature difference measured directly from the cooling panel. 4 refs., 8 figs., 1 tab.

Investigation on Wall Panel Sandwiched With Lightweight Concrete

Science.gov (United States)

Lakshmikandhan, K. N.; Harshavardhan, B. S.; Prabakar, J.; Saibabu, S.

2017-08-01

The rapid population growth and urbanization have made a massive demand for the shelter and construction materials. Masonry walls are the major component in the housing sector and it has brittle characteristics and exhibit poor performance against the uncertain loads. Further, the structure requires heavier sections for carrying the dead weight of masonry walls. The present investigations are carried out to develop a simple, lightweight and cost effective technology for replacing the existing wall systems. The lightweight concrete is developed for the construction of sandwich wall panel. The EPS (Expanded Polystyrene) beads of 3 mm diameter size are mixed with concrete and developed a lightweight concrete with a density 9 kN/m3. The lightweight sandwich panel is cast with a lightweight concrete inner core and ferrocement outer skins. This lightweight wall panel is tested for in-plane compression loading. A nonlinear finite element analysis with damaged plasticity model is carried out with both material and geometrical nonlinearities. The experimental and analytical results were compared. The finite element study predicted the ultimate load carrying capacity of the sandwich panel with reasonable accuracy. The present study showed that the lightweight concrete is well suitable for the lightweight sandwich wall panels.

78 FR 51708 - North American Free-Trade Agreement (NAFTA), Article 1904 Binational Panel Reviews

Science.gov (United States)

2013-08-21

... (NAFTA), Article 1904 Binational Panel Reviews AGENCY: NAFTA Secretariat, United States Section... determination. Under Article 1904 of the Agreement, which came into force on January 1, 1994, the Government of... Procedure for Article 1904 Binational Panel Reviews (``Rules''). These Rules were published in the Federal...

75 FR 74686 - North American Free-Trade Agreement (NAFTA), Article 1904 Binational Panel Reviews

Science.gov (United States)

2010-12-01

... (NAFTA), Article 1904 Binational Panel Reviews AGENCY: NAFTA Secretariat, United States Section... determination. Under Article 1904 of the Agreement, which came into force on January 1, 1994, the Government of... Procedure for Article 1904 Binational Panel Reviews (``Rules''). These Rules were published in the Federal...

77 FR 29965 - North American Free-Trade Agreement (NAFTA), Article 1904 Binational Panel Reviews

Science.gov (United States)

2012-05-21

... (NAFTA), Article 1904 Binational Panel Reviews AGENCY: NAFTA Secretariat, United States Section... determination. Under Article 1904 of the Agreement, which came into force on January 1, 1994, the Government of... Procedure for Article 1904 Binational Panel Reviews (``Rules''). These Rules were published in the Federal...

Hybrid FEA/SEA Assessment for an Orthogrid Cylindrical Panel Section and Periodic Subsystem Modeling Evaluation

Science.gov (United States)

Smith, Andrew M.; LaVerde, Bruce; Teague, David W.

2010-01-01

In the lower frequency range, where particular boundary conditions can make a significant difference to panel response characteristics Statistical Energy Analysis (SEA) has never been the analytical tool of choice. In addition to boundary condition effects, SEA is not well suited in frequency bands where no modes or less than a few modes exist. The advent of the Hybrid Module has enabled integration of Finite Element Analysis to expand and enhance the capability for response calculations within VA One into the lower frequency range. Exploration of several additional modeling approaches was completed for the cylindrical orthogrid panel test article that was examined in Reference 1. Comparison of the new analytical response predictions with the measured response data from ground test and the pure SEA results from the reference will be presented. One approach that is considered promising is the periodic subsystem capability. Initially, a detailed FEM of just one region of the test article is defined. After evaluating this small region using symmetric boundary conditions, the FEM may be expanded to determine the properties of the entire system using similar connected regions that map over the entire test article. Another approach is the direct use of a very detailed finite element model of the entire panel, explicitly modeling pocket and rib details of the structure. A third approach is to approximate localized structure geometry details with a smeared property generalization using a PCOMP (NASTRAN card used to define layered composite structures) to define skin layer and ribbed layer for the orthogrid panel. The authors expect to demonstrate that the integrated Hybrid/FEM approach increases confidence in response prediction in the lower frequency range (for example from 20-300 Hz for the test article under consideration). In addition the strength and weakness of each additional approach will be highlighted and compared to those reported with those reported in an

Study of behaviour of workings in longwall panel based on field instrumentation

Energy Technology Data Exchange (ETDEWEB)

V.R. Sastry; Roshan Nair [National Institute of Technology Karnataka, Mangalore (India). Department of Mining Engineering

2009-07-01

The paper presents field monitoring study of two adjacent longwall panels based on stress measurements in longwall block and barrier, load transferred on to the gate roads and convergence measurements in the gate roads during face retreat in the panels. Results indicated that the section of barrier lying in the goaf experienced higher abutment stress when compared with the section lying ahead of face. There was a transfer of load in gate roads ahead of face after the occurrence of roof fall in goaf. Maximum cumulative convergence of more than 8 mm was observed in the gate roads during weightings.

50 CFR 600.753 - Notice of intent to establish a fishery negotiation panel.

Science.gov (United States)

2010-10-01

... 50 Wildlife and Fisheries 8 2010-10-01 2010-10-01 false Notice of intent to establish a fishery negotiation panel. 600.753 Section 600.753 Wildlife and Fisheries FISHERY CONSERVATION AND MANAGEMENT, NATIONAL OCEANIC AND ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE MAGNUSON-STEVENS ACT PROVISIONS Fishery Negotiation Panels § 600.753 Notice...

Effects of Post-Session Wheel Running on Within-Session Changes in Operant Responding

Science.gov (United States)

Aoyama, Kenjiro

2007-01-01

This study tested the effects of post-session wheel running on within-session changes in operant responding. Lever-pressing by six rats was reinforced by a food pellet under a continuous reinforcement (CRF) schedule in 30-min sessions. Two different flavored food pellets were used as reinforcers. In the wheel conditions, 30-min operant-sessions…

Meet Your Future: An Interactive Panel on Industry Careers

Science.gov (United States)

Lambert, Steven

There will be a brief presentation showing some statistics about careers in physics followed by a panel discussion. The panelists are: Pavel Kornilovich, HP Inc., Senior Technologist Erik Lucero, Google Santa Barbara, Hardware Engineer Raja Rajasekaran, Toptica-USA, Western Regional Sales & Application Manager Tiffany Santos, Western Digital, Principal Research Engineer Krysta Svore, Microsoft, Principal Researcher & Research Manager Each panelist will introduce themselves and give a brief overview of their career path. We'll then open it up to audience participation. Bring your questions about working in the private sector: daily responsibilities, work environment, how to prepare for this path, making contacts, and anything else you'd like to hear about. We look forward to an interactive and lively session.

Ecological Panel Inference from Repeated Cross Sections

NARCIS (Netherlands)

Pelzer, Ben; Eisinga, Rob; Franses, Philip Hans

2004-01-01

This chapter presents a Markov chain model for the estimation of individual-level binary transitions from a time series of independent repeated cross-sectional (RCS) samples. Although RCS samples lack direct information on individual turnover, it is demonstrated here that it is possible with these

Effective medical treatment of opiate addiction. National Consensus Development Panel on Effective Medical Treatment of Opiate Addiction.

Science.gov (United States)

1998-12-09

To provide clinicians, patients, and the general public with a responsible assessment of the effective approaches to treat opiate dependence. A nonfederal, nonadvocate, 12-member panel representing the fields of psychology, psychiatry, behavioral medicine, family medicine, drug abuse, epidemiology, and the public. In addition, 25 experts from these same fields presented data to the panel and a conference audience of 600. Presentations and discussions were divided into 3 phases over 2 1/2 days: (1) presentations by investigators working in the areas relevant to the consensus questions during a 2-day public session; (2) questions and statements from conference attendees during open discussion periods that are part of the public session; and (3) closed deliberations by the panel during the remainder of the second day and morning of a third day. The conference was organized and supported by the Office of Medical Applications of Research, National Institutes of Health. The literature was searched through MEDLINE and other National Library of Medicine and online databases from January 1994 through September 1997 and an extensive bibliography of 941 references was provided to the panel and the conference audience. Experts prepared abstracts for their presentations as speakers at the conference with relevant citations from the literature. Scientific evidence was given precedence over clinical anecdotal experience. The panel, answering predefined questions, developed its conclusions based on the scientific evidence presented in open forum and the scientific literature. The panel composed a draft statement that was read in its entirety and circulated to the experts and the audience for comment. Thereafter, the panel resolved conflicting recommendations and released a revised statement at the end of the conference. The panel finalized the revisions within a few weeks after the conference. The draft statement was made available on the World Wide Web immediately following its

Aerospace Safety Advisory Panel Annual Report for 1999

Science.gov (United States)

Blomberg, Richard D.

2000-01-01

recommendations in this report do not highlight any major, immediate issues that might compromise the safe pursuit of the various NASA programs. They do, however, cover concerns that the Panel believes should be addressed in the interest of maintaining NASA's excellent safety record.The Panel is pleased to note that remedial efforts for some of the findings raised are underway. Given appropriate funding and cooperative efforts among the Administration, the Congress and the various contractors, the Panel is convinced that safety problems can be avoided or solved resulting in lower risk for NASA's human space and aeronautics programs. Section II of this report contains specific findings and recommendations generated by Panel activities during the calendar year 1999. Section III presents more detailed information in support of these findings and recommendations. A current roster of Panel members, consultants, and staff is included as Appendix A. Appendix B contains NASA's response to the findings and recommendations from the 1998 annual report. It has been augmented this year to include brief explanations of why the Panel classified the NASA response as " open,""continuing," or "closed." Appendix C lists the fact-finding activities of the Panel in 1999.

First Doctoral student assembly and poster session at CERN

CERN Multimedia

2010-01-01

Presently, 130 doctoral students at CERN do their research on “technical” subjects such as magnets and cryogenics, beam and detector physics, computing and vacuum, among others.   Student present  their scientific achievements at the first doctoral student assembly. To present their scientific achievements and to bring together the students with CERN supervisors and CERN’s management was the main objective of the first doctoral student assembly and poster session, held June 30. The photograph shows about half of those who presented posters, all in their second year of assignment, and ready to attach their work to the panels. Another aim of the assembly was to discuss the outcome of the anonymous questionnaire and to gain feedback for the improvement of the doctoral student program. While there is vast overall satisfaction, improvements should aim at strengthening the links between students, CERN supervisors, and university professors. With 24 posters prese...

Stressed skin panels

Energy Technology Data Exchange (ETDEWEB)

Anon

2001-07-01

Advantages and disadvantages of stressed skin panels, also known as structural insulated panels (SIPs), are discussed as material and labour-saving alternatives to traditional stick framing. Stressed skin panels are manufactured 'sandwich' assemblies with a rigid insulating polystyrene foam core, whose interior and exterior surfaces are bonded into panels. The skins distribute and carry the structural loading while the bonded foam core provides insulation and keeps the two skins aligned. Since there are fewer framing members, there is little thermal bridging and the R-value remains high. SIPs are usually manufactured in four feet by eight feet panels, although some manufacturers can produce panels up to eight feet by forty feet. SIPs are resource efficient as they use less wood than conventional framing (about 25 per cent less); can structurally cover large spans, requiring less supplementary framing. Use of SIPs eliminate the need for headers over small openings; provide the ability to nail anywhere; create less scrap and waste; lessen vulnerability to unfavourable weather and other job-site hazards, can reduce delays, and often can produce significant savings in material and labour costs. Limitations include the more complex approaches to plumbing and electrical systems, although this can be minimized by designers by incorporating much of the plumbing and electrical work on interior (non-panel) walls. Most stressed skin panels require one-half inch interior gypsum drywall. If become wet, stressed skin panels take a long time to dry out and may harbour mold growth. Larger stressed-skin panels used in floors and roofs, may require cranes or other machinery for handling because of their weight. Although not without some environmental impact, overall, stressed skin panels are judged to be a resource-efficient building technology with significant energy-efficiency benefits and distinct advantages over stick framing. 3 photos.

The third session of the United Nations Commission on Sustainable Development

International Nuclear Information System (INIS)

Guerrero, Juan Carlos

1996-01-01

Between the 11 and April of 1995, 28 almost three years later of the summit of the earth, representatives of countless countries and non government organizations (ONG) to carry out the third session of the Commission of Sustainable Development (CSD); in her were shared and they evaluated the different national experiences once again in the implementation of the program 21. The third session of the CSD began its work with two discussions in panel. The first; about the resources and financial mechanisms.; and the second; on regional matters. Then were carried out general debates on the advances in the execution of the program 21 and the drafts of the different recommendations were discussed adopted in three discussion groups: the group to that treated the chapters 2, 3, 4, 5 and 33 of the program 21; the group b that discussed the chapters 8, 34, 35 and 40; and the group c (regional matters) that embraced the chapters 10, 11, 12, 13, 14, 15 and 21 of the program 21. Two days they were devoted to the presentation of national strategies for the sustainable development and of national experiences in the administration of the earth and the sustainable agriculture that showed local advances in the implementation of the program 21

International Seminar on Nuclear War and Planetary Emergencies : 46th Session : The Role of Science in the Third Millennium

CERN Document Server

2014-01-01

Proceedings of the 46th Session of the International Seminars on Nuclear War and Planetary Emergencies held in "E. Majorana" Centre for Scientific Culture, Erice, Sicily. This Seminar has again gathered, in 2013, over 100 scientists from 43 countries in an interdisciplinary effort that has been going on for the last 32 years, to examine and analyze planetary problems which had been followed up, all year long, by the World Federation of Scientists' Permanent Monitoring Panels.

[Using consumer panels in public health observational studies].

Science.gov (United States)

Matilla-Santander, Nuria; Fu, Marcela; Ballbè, Montse; Lidón-Moyano, Cristina; Martín-Sánchez, Juan Carlos; Fernández, Esteve; Martínez-Sánchez, José M

Consumer panels are a market research method useful for gathering information about low-frequency or difficult-access customers. The objective of this field-note is to explain our experience using this method in a cross-sectional public health study on the use of electronic cigarettes. After taking into account other non-probabilistic sampling techniques to obtain a huge sample of electronic-cigarette users (n=600), in the end we decided to use consumer panels (recruiters) because of the relative short duration of the field work and the high representativeness of the sample. Copyright © 2017 SESPAS. Publicado por Elsevier España, S.L.U. All rights reserved.

Session Types at the Mirror

Directory of Open Access Journals (Sweden)

Luca Padovani

2009-12-01

Full Text Available We (redefine session types as projections of process behaviors with respect to the communication channels they use. In this setting, we give session types a semantics based on fair testing. The outcome is a unified theory of behavioral types that shares common aspects with conversation types and that encompass features of both dyadic and multi-party session types. The point of view we provide sheds light on the nature of session types and gives us a chance to reason about them in a framework where every notion, from well-typedness to the subtyping relation between session types, is semantically -rather than syntactically- grounded.

Prediction of radiation ratio and sound transmission of complex extruded panel using wavenumber domain Unite element and boundary element methods

International Nuclear Information System (INIS)

Kim, H; Ryue, J; Thompson, D J; Müller, A D

2016-01-01

Recently, complex shaped aluminium panels have been adopted in many structures to make them lighter and stronger. The vibro-acoustic behaviour of these complex panels has been of interest for many years but conventional finite element and boundary element methods are not efficient to predict their performance at higher frequencies. Where the cross-sectional properties of the panels are constant in one direction, wavenumber domain numerical analysis can be applied and this becomes more suitable for panels with complex cross-sectional geometries. In this paper, a coupled wavenumber domain finite element and boundary element method is applied to predict the sound radiation from and sound transmission through a double-layered aluminium extruded panel, having a typical shape used in railway carriages. The predicted results are compared with measured ones carried out on a finite length panel and good agreement is found. (paper)

Comprehensive metabolic panel

Science.gov (United States)

Metabolic panel - comprehensive; Chem-20; SMA20; Sequential multi-channel analysis with computer-20; SMAC20; Metabolic panel 20 ... Chernecky CC, Berger BJ. Comprehensive metabolic panel (CMP) - blood. In: ... Tests and Diagnostic Procedures . 6th ed. St Louis, MO: ...

Noise Reduction in Double‿Panel Structures by Cavity and Panel Resonance Control

NARCIS (Netherlands)

Ho, J.; Berkhoff, Arthur P.

2011-01-01

This paper presents an investigation of the cavity and the panel resonance control in a double‿panel structure. The double‿panel structure, which consists of two panels with air in the gap, is widely adopted in many applications such as aerospace due to its light weight and effective

Noise reduction in double-panel structures by cavity and panel resonance control

NARCIS (Netherlands)

Ho, J.-H.; Berkhoff, A.P

2011-01-01

This paper presents an investigation of the cavity and the panel resonance control in a double‐panel structure. The double‐panel structure, which consists of two panels with air in the gap, is widely adopted in many applications such as aerospace due to its light weight and effective

Axial Compression Behavior of a New Type of Prefabricated Concrete Sandwich Wall Panel

Science.gov (United States)

Qun, Xie; Shuai, Wang; Chun, Liu

2018-03-01

A novel type of prefabricated concrete sandwich wall panel which could be used as a load-bearing structural element in buildings has been presented in this paper. Compared with the traditional sandwich panels, there are several typical characteristics for this wall system, including core columns confined by spiral stirrup along the cross-section of panel with 600mm spacing, precast foamed concrete block between two structural layers as internal insulation part, and a three-dimensional (3D) steel wire skeleton in each layer which is composed of two vertical steel wire meshes connected by horizontally short steel bar. All steel segments in the panel are automatically prefabricated in factory and then are assembled to form steel system in site. In order to investigate the structural behavior of this wall panel, two full-scale panels have been experimentally studied under axial compressive load. The test results show that the wall panel presents good load-bearing capacity and integral stiffness without out-of-plane flexural failure. Compared to the panel with planar steel wire mesh in concrete layer, the panel with 3D steel wire skeleton presents higher strength and better rigidity even in the condition of same steel ratio in panels which verifies that the 3D steel skeleton could greatly enhance the structural behavior of sandwich panel.

Effort-reward imbalance and work ability: cross-sectional and longitudinal findings from the Second German Sociomedical Panel of Employees.

Science.gov (United States)

Bethge, Matthias; Radoschewski, Friedrich Michael; Gutenbrunner, Christoph

2012-10-15

Although data from longitudinal studies are sparse, effort-reward imbalance (ERI) seems to affect work ability. However, the potential pathway from restricted work ability to ERI must also be considered. Therefore, the aim of our study was to analyse cross-sectional and longitudinal associations between ERI and work ability and vice versa. Data come from the Second German Sociomedical Panel of Employees. Logistic regression models were estimated to determine cross-sectional and longitudinal associations. The sample used to predict new cases of poor or moderate work ability was restricted to cases with good or excellent work ability at baseline. The sample used to predict new cases of ERI was restricted to persons without ERI at baseline. The cross-sectional analysis included 1501 full-time employed persons. The longitudinal analyses considered 600 participants with good or excellent baseline work ability and 666 participants without baseline ERI, respectively. After adjustment for socio-demographic variables, health-related behaviour and factors of the work environment, ERI was cross-sectionally associated with poor or moderate work ability (OR = 1.980; 95% CI: 1.428 to 2.747). Longitudinally, persons with ERI had 2.1 times higher odds of poor or moderate work ability after one year (OR = 2.093; 95% CI: 1.047 to 4.183). Conversely, persons with poor or moderate work ability had 2.6 times higher odds of an ERI after one year (OR = 2.573; 95% CI: 1.314 to 5.041). Interventions that enable workers to cope with ERI or address indicators of ERI directly could promote the maintenance of work ability. Integration management programmes for persons with poor work ability should also consider their psychosocial demands.

PERBANDINGAN UNJUK KERJA ANTARA PANEL SEL SURYA BERPENJEJAK DENGAN PANEL SEL SURYA DIAM

Directory of Open Access Journals (Sweden)

Syafaruddin Ch

2010-07-01

Full Text Available The ability to produce electrical energy at Solar Power Plant  is highly dependent on the magnitude and duration of sun exposure on the solar cell panels. The movement of the sun from east to west that periodicity in every day is a problem at  the  optimization generation of electricity at  Solar Power Plant   if using solar panel that motionless. This is because the solar cell panel can not catch the maximum sun exposure. To solve the above problem then designed a solar cell panel  tracker  capable of follo-wing the movements of the sun. Then conducted a test to see the performance of solar cell pa-nel  tracker  and compare it with the performance of solar cell panel was motionless. The testing doing along 6 days, with way to irradiate the panel of solar cells  tracker  and panels of solar cell motionless with sun exposure  along a  full day. Then the electric current generated each panel were recorded. The comparison of current then generating comparison of electric power delivery. The result show that the solar cell panel  tracker  produce the average current is 2.19 A whereas solar-cell panel still 1.97 A.  This result   indicate that average power for solar cell panel  tracker  39.41 W while for solar cell panel that motionless is  35.46 W. These results indicate that the performance of solar cell panel  tracker  better than  solar cell panel motionless.

Specifications for Supplementary Classroom Units, Stressed Skin Panel.

Science.gov (United States)

Waring, Robert B.; And Others

Complete outline specifications are given for the construction of supplementary classroom units using stressed skin panels. Sections included are--(1) concrete and related work, (2) masonry, (3) structural and miscellaneous metal, (4) curtain walls and metal windows, (5) carpentry and related work, (6) roofing, sheet metal, and related work, (7)…

Space Shuttle Orbiter Wing-Leading-Edge Panel Thermo-Mechanical Analysis for Entry Conditions

Science.gov (United States)

Knight, Norman F., Jr.; Song, Kyongchan; Raju, Ivatury S.

2010-01-01

Linear elastic, thermo-mechanical stress analyses of the Space Shuttle Orbiter wing-leading-edge panels is presented for entry heating conditions. The wing-leading-edge panels are made from reinforced carbon-carbon and serve as a part of the overall thermal protection system. Three-dimensional finite element models are described for three configurations: integrated configuration, an independent single-panel configuration, and a local lower-apex joggle segment. Entry temperature conditions are imposed and the through-the-thickness response is examined. From the integrated model, it was concluded that individual panels can be analyzed independently since minimal interaction between adjacent components occurred. From the independent single-panel model, it was concluded that increased through-the-thickness stress levels developed all along the chord of a panel s slip-side joggle region, and hence isolated local joggle sections will exhibit the same trend. From the local joggle models, it was concluded that two-dimensional plane-strain models can be used to study the influence of subsurface defects along the slip-side joggle region of these panels.

Noise Reduction in Double‿Panel Structures by Cavity and Panel Resonance Control

OpenAIRE

Ho, J.; Berkhoff, Arthur P.

2011-01-01

This paper presents an investigation of the cavity and the panel resonance control in a double‿panel structure. The double‿panel structure, which consists of two panels with air in the gap, is widely adopted in many applications such as aerospace due to its light weight and effective transmission‿loss at high frequency. However, the resonance of the cavity and the poor transmission‿loss at low frequency limit its noise control performance. Applying active control forces on the panels or utili...

Summary: Hadron dynamics sessions

International Nuclear Information System (INIS)

Carroll, A.S.; Londergan, J.T.

1993-01-01

Four sessions on Hadron Dynamics were organized at this Workshop. The first topic, QCD Exclusive Reactions and Color Transparency, featured talks by Ralston, Heppelman and Strikman; the second, QCD and Inclusive Reactions had talks by Garvey, Speth and Kisslinger. The third dynamics session, Medium Modification of Elementary Interactions had contributions from Kopeliovich, Alves and Gyulassy; the fourth session Pre-QCD Dynamics and Scattering, had talks by Harris, Myhrer and Brown. An additional joint Spectroscopy/Dynamics session featured talks by Zumbro, Johnson and McClelland. These contributions are reviewed briefly in this summary. Two additional joint sessions between Dynamics and η physics are reviewed by the organizers of the Eta sessions. In such a brief review there is no way the authors can adequately summarize the details of the physics presented here. As a result, they concentrate only on brief impressionistic sketches of the physics topics discussed and their interrelations. They include no bibliography in this summary, but simply refer to the talks given in more detail in the Workshop proceedings. They focus on topics which were common to several presentations in these sessions. First, nuclear and particle descriptions of phenomena are now clearly converging, in both a qualitative and quantitative sense; they show several examples of this convergence. Second, an important issue in hadron dynamics is the extent to which elementary interactions are modified in nuclei at high energies and/or densities, and they illustrate some of these medium effects. Finally, they focus on those dynamical issues where hadron facilities can make an important, or even a unique, contribution to the knowledge of particle and nuclear physics

Essaying a Pseudo-Panel Approach: Studies on Education, Women, and Income Inequality in Thailand

Science.gov (United States)

Warunsiri, Sasiwimon

2010-01-01

This dissertation is composed of three studies on Thai labor markets using a pseudo-panel data set: The first chapter estimates the rate of return to education in Thailand, while treating the endogeneity bias common to estimates from data on individuals. Pseudo-panel data are constructed from repeated cross sections of Labor Force Surveys…

Paneling architectural freeform surfaces

KAUST Repository

Eigensatz, Michael

2010-07-25

The emergence of large-scale freeform shapes in architecture poses big challenges to the fabrication of such structures. A key problem is the approximation of the design surface by a union of patches, so-called panels, that can be manufactured with a selected technology at reasonable cost, while meeting the design intent and achieving the desired aesthetic quality of panel layout and surface smoothness. The production of curved panels is mostly based on molds. Since the cost of mold fabrication often dominates the panel cost, there is strong incentive to use the same mold for multiple panels. We cast the major practical requirements for architectural surface paneling, including mold reuse, into a global optimization framework that interleaves discrete and continuous optimization steps to minimize production cost while meeting user-specified quality constraints. The search space for optimization is mainly generated through controlled deviation from the design surface and tolerances on positional and normal continuity between neighboring panels. A novel 6-dimensional metric space allows us to quickly compute approximate inter-panel distances, which dramatically improves the performance of the optimization and enables the handling of complex arrangements with thousands of panels. The practical relevance of our system is demonstrated by paneling solutions for real, cutting-edge architectural freeform design projects.

Paneling architectural freeform surfaces

KAUST Repository

Eigensatz, Michael

2010-07-26

The emergence of large-scale freeform shapes in architecture poses big challenges to the fabrication of such structures. A key problem is the approximation of the design surface by a union of patches, socalled panels, that can be manufactured with a selected technology at reasonable cost, while meeting the design intent and achieving the desired aesthetic quality of panel layout and surface smoothness. The production of curved panels is mostly based on molds. Since the cost of mold fabrication often dominates the panel cost, there is strong incentive to use the same mold for multiple panels. We cast the major practical requirements for architectural surface paneling, including mold reuse, into a global optimization framework that interleaves discrete and continuous optimization steps to minimize production cost while meeting user-specified quality constraints. The search space for optimization is mainly generated through controlled deviation from the design surface and tolerances on positional and normal continuity between neighboring panels. A novel 6-dimensional metric space allows us to quickly compute approximate inter-panel distances, which dramatically improves the performance of the optimization and enables the handling of complex arrangements with thousands of panels. The practical relevance of our system is demonstrated by paneling solutions for real, cutting-edge architectural freeform design projects. © 2010 ACM.

Implementation of a novel population panel management curriculum among interprofessional health care trainees.

Science.gov (United States)

Kaminetzky, Catherine P; Beste, Lauren A; Poppe, Anne P; Doan, Daniel B; Mun, Howard K; Woods, Nancy Fugate; Wipf, Joyce E

2017-12-22

Gaps in chronic disease management have led to calls for novel methods of interprofessional, team-based care. Population panel management (PPM), the process of continuous quality improvement across groups of patients, is rarely included in health professions training for physicians, nurses, or pharmacists. The feasibility and acceptance of such training across different healthcare professions is unknown. We developed and implemented a novel, interprofessional PPM curriculum targeted to diverse health professions trainees. The curriculum was implemented annually among internal medicine residents, nurse practitioner students and residents, and pharmacy residents co-located in a large, academic primary care site. Small groups of interprofessional trainees participated in supervised quarterly seminars focusing on chronic disease management (e.g., diabetes mellitus, hypertension, or chronic obstructive pulmonary disease) or processes of care (e.g., emergency department utilization for nonacute conditions or chronic opioid management). Following brief didactic presentations, trainees self-assessed their clinic performance using patient-level chart review, presented individual cases to interprofessional staff and faculty, and implemented subsequent feedback with their clinic team. We report data from 2011 to 2015. Program evaluation included post-session participant surveys regarding attitudes, knowledge and confidence towards PPM, ability to identify patients for referral to interprofessional team members, and major learning points from the session. Directed content analysis was performed on an open-ended survey question. Trainees (n = 168) completed 122 evaluation assessments. Trainees overwhelmingly reported increased confidence in using PPM and increased knowledge about managing their patient panel. Trainees reported improved ability to identify patients who would benefit from multidisciplinary care or referral to another team member. Directed content analysis

Fracture Mechanics Analyses of the Slip-Side Joggle Regions of Wing-Leading Edge Panels

Science.gov (United States)

Raju, Ivatury S.; Knight, Norman F., Jr.; Song, Kyongchan; Phillips, Dawn R.

2010-01-01

The Space Shuttle Orbiter wing comprises of 22 leading edge panels on each side of the wing. These panels are part of the thermal protection system that protects the Orbiter wings from extreme heating that take place on the reentry in to the earth atmosphere. On some panels that experience extreme heating, liberation of silicon carbon (SiC) coating was observed on the slip side regions of the panels. Global structural and local fracture mechanics analyses were performed on these panels as a part of the root cause investigation of this coating liberation anomaly. The wing-leading-edge reinforced carbon-carbon (RCC) panels, Panel 9, T-seal 10, and Panel 10, are shown in Figure 1 and the progression of the stress analysis models is presented in Figure 2. The global structural analyses showed minimal interaction between adjacent panels and the T-seal that bridges the gap between the panels. A bounding uniform temperature is applied to a representative panel and the resulting stress distribution is examined. For this loading condition, the interlaminar normal stresses showed negligible variation in the chord direction and increased values in the vicinity of the slip-side joggle shoulder. As such, a representative span wise slice on the panel can be taken and the cross section can be analyzed using plane strain analysis.

2010 ANNUAL MEETING ON NUCLEAR TECHNOLOGY. Pt. 4. Section reports

International Nuclear Information System (INIS)

Berlepsch, Thilo v.; Hering, Wolfgang

2011-01-01

Summary report on 2 Sessions of Section: - New Build and Innovations (Section 12) of the ANNUAL MEETING On NUCLEAR TECHNOLOGY held in Berlin on May 4 to 6, 2010. The other Sections 'Reactor Physics and Methods of Calculation (Section 1)', 'Thermodynamics and Fluid Dynamics (Section 2)', 'Safety of Nuclear Installations - Methods, Analysis, Results (Section 3)', 'Front End and Back End of the Fuel Cycle, Radioactive Waste, Storage (Section 4)', 'Front End of the Fuel Cycle, Fuel Elements and Core Components (Section 5)', 'Operation of Nuclear Installations (Section 6)', 'Decommissioning of Nuclear Installations (Section 7)', 'Fusion Technology (Section 8)', 'Energy Industry and Economics (Section 10)', 'Radiation Protection (Section 11)', 'New Build and Innovations (Session New Build and Innovations, Section 12)', and 'Education, Expert Knowledge, Know-how-Transfer (Section 13)' have been covered in atw issues 10, 11 and 12 (2010). (orig.)

Panel 5: Microbiology and Immunology Panel

Science.gov (United States)

Murphy, Timothy F.; Chonmaitree, Tasnee; Barenkamp, Stephen; Kyd, Jennelle; Nokso-Koivisto, Johanna; Patel, Janak A.; Heikkinen, Terho; Yamanaka, Noboru; Ogra, Pearay; Swords, W. Edward; Sih, Tania; Pettigrew, Melinda M.

2014-01-01

Objective The objective is to perform a comprehensive review of the literature from January 2007 through June 2011 on the virology, bacteriology, and immunology related to otitis media. Data Sources PubMed database of the National Library of Medicine. Review Methods Three subpanels with co-chairs comprising experts in the virology, bacteriology, and immunology of otitis media were formed. Each of the panels reviewed the literature in their respective fields and wrote draft reviews. The reviews were shared with all panel members, and a second draft was created. The entire panel met at the 10th International Symposium on Recent Advances in Otitis Media in June 2011 and discussed the review and refined the content further. A final draft was created, circulated, and approved by the panel. Conclusion Excellent progress has been made in the past 4 years in advancing an understanding of the microbiology and immunology of otitis media. Advances include laboratory-based basic studies, cell-based assays, work in animal models, and clinical studies. Implications for Practice The advances of the past 4 years formed the basis of a series of short-term and long-term research goals in an effort to guide the field. Accomplishing these goals will provide opportunities for the development of novel interventions, including new ways to better treat and prevent otitis media. PMID:23536533

Is energy consumption per capita broken stationary? New evidence from regional-based panels

International Nuclear Information System (INIS)

Chen, P.-F.; Lee, C.-C.

2007-01-01

For the first time, a new panel unit root testing procedure, developed by [51]Carrion-i-Silvestre et al. [2005. Breaking the panels: an application to GDP per capita. Econometrics Journal 8, 159-175], is applied to re-investigate the stationarity of energy consumption per capita for 7 regional panel sets covering the 1971-2002 period. With structural breaks and cross-sectional correlations introduced into the model, it becomes clear that all regional-based panels of energy consumption per capita are stationary. The structural breakpoints identify the likely causes of major changes in energy consumption in the past. The findings underscore the importance of accounting for exogenous shocks to a series and offer several important implications for policy makers and energy economists

Students' perception towards the problem based learning tutorial session in a system-based hybrid curriculum.

Science.gov (United States)

Al-Drees, Abdulmajeed A; Khalil, Mahmoud S; Irshad, Mohammad; Abdulghani, Hamza M

2015-03-01

To evaluate students' perception towards the problem based learning (PBL) session in a system-based hybrid curriculum. We conducted a cross-sectional study in the College of Medicine, King Saud University, Saudi Arabia at the end of the 2012-2013 academic year. The survey questionnaire was self-administered, and examined perceptions of PBL session benefits, appropriate running of sessions, and tutor's roles. Out of 510 students, 275 (53.9%) completed the questionnaire. Most of the students reported that PBL sessions were helpful in understanding basic sciences concepts (p=0.04). In addition, they agreed that PBL sessions increased their knowledge of basic sciences (p=0.01). Most students reported that PBL sessions encouraged self-directed learning, collaborative learning, and improved decision making skills. However, 54.5% of students reported lack of proper training before starting the PBL sessions, and only 25.1% of students agreed that the teaching staff are well prepared to run the sessions. Most students used the internet (93.1%), lecture notes (76.7%), and books (64.4%) as learning resources. Most students reported repetition of topics between PBL sessions and lectures (p=0.07). The study highlighted the significant role of PBL in a system-based hybrid curriculum and helped students improve their knowledge and different learning skills. Students and staff training is required before the utilizing the PBL as an instructional method.

Pain and Joy of a Panel Survey on Transport Studies

Energy Technology Data Exchange (ETDEWEB)

Comendador Arquero, María Eugenia López-Lambas

2016-07-01

Over ten years ago, it was established that the most frequent reason that motivates a panel survey on transport studies is the evaluation of a change in the transportation system, or a specific transportation-planning project, especially when the project involves novel elements. From a statistical viewpoint, a panel survey has the definite advantage to offer more accurate estimatesof changes than cross-sectional surveys for the same sample size. Observing travel patterns of individuals and households overseveral consecutive days, has offered insights into activity scheduling and travel planning. Variability in travel patterns has important policy implications as well, but how much effort is worth to design a panel survey? To evaluate the effects of the transport policies introduced in Madrid during the last five years, a ‘short-long’ panel survey wasbuilt, based on a sample of a Madrid-worker subpopulation most affected by those recent changes in transport policy. The paper describes both the design and construction of the panel based on GPS technology, and presents some results based on an analysis of its two waves; for example, it registered an increment of public transport use and walking trips in 10%. The panel overcomes the known attrition problem thanks to providing incentives, maintaining contact, using the same interviewer for the same respondents, and conducting face-to-face interviews. (Author)

Persistence Heterogeneity Testing in Panels with Interactive Fixed Effects

DEFF Research Database (Denmark)

Ergemen, Yunus Emre; Velasco, Carlos

We consider large N,T panel data models with fixed effects, a common factor allowing for cross-section dependence, and persistent data and shocks, which are assumed fractionally integrated. In a basic setup, the main interest is on the fractional parameter of the idiosyncratic component, which...

Comparisons between various cavity and panel noise reduction control in double-panel structures

NARCIS (Netherlands)

Ho, J.H.; Kalverboer, J.; Berkhoff, A.P.

2012-01-01

This paper presents comparisons between various panel and cavity resonance control methods to reduce the transmitted sound in a double-panel structure. The double-panel, which consists of two panels with air in the gap, has the advantages of low weight and effective transmission-loss at high

Causal Relationship Between Relative Price Variability and Inflation in Turkey: Evidence from Panel Data

Directory of Open Access Journals (Sweden)

Nebiye Yamak

2016-06-01

Full Text Available This study investigates the causal relationship between inflation and relative price variability in Turkey for the period of January 2003-January 2014, by using panel data. In the study, a Granger (1969 non-causality test in heterogeneous panel data models developed by Dumitrescu and Hurlin (2012 is utilized to determine the causal relations between inflation rate relative price variability. The panel data consists of 4123 observations: 133 time observations and 31 cross-section observations. The results of panel causality test indicate that there is a bidirectional causality between inflation rate and relative price variability by not supporting the imperfection information model of Lucas and the menu cost model of Ball and Mankiw.

Effort-reward imbalance and work ability: cross-sectional and longitudinal findings from the Second German Sociomedical Panel of Employees

Directory of Open Access Journals (Sweden)

Bethge Matthias

2012-10-01

Full Text Available Abstract Background Although data from longitudinal studies are sparse, effort-reward imbalance (ERI seems to affect work ability. However, the potential pathway from restricted work ability to ERI must also be considered. Therefore, the aim of our study was to analyse cross-sectional and longitudinal associations between ERI and work ability and vice versa. Methods Data come from the Second German Sociomedical Panel of Employees. Logistic regression models were estimated to determine cross-sectional and longitudinal associations. The sample used to predict new cases of poor or moderate work ability was restricted to cases with good or excellent work ability at baseline. The sample used to predict new cases of ERI was restricted to persons without ERI at baseline. Results The cross-sectional analysis included 1501 full-time employed persons. The longitudinal analyses considered 600 participants with good or excellent baseline work ability and 666 participants without baseline ERI, respectively. After adjustment for socio-demographic variables, health-related behaviour and factors of the work environment, ERI was cross-sectionally associated with poor or moderate work ability (OR = 1.980; 95% CI: 1.428 to 2.747. Longitudinally, persons with ERI had 2.1 times higher odds of poor or moderate work ability after one year (OR = 2.093; 95% CI: 1.047 to 4.183. Conversely, persons with poor or moderate work ability had 2.6 times higher odds of an ERI after one year (OR = 2.573; 95% CI: 1.314 to 5.041. Conclusions Interventions that enable workers to cope with ERI or address indicators of ERI directly could promote the maintenance of work ability. Integration management programmes for persons with poor work ability should also consider their psychosocial demands.

Solar reflection panels

Science.gov (United States)

Diver, Jr., Richard B.; Grossman, James W [Albuquerque, NM; Reshetnik, Michael [Boulder, CO

2006-07-18

A solar collector comprising a glass mirror, and a composite panel, wherein the back of the mirror is affixed to a front surface of the composite panel. The composite panel comprises a front sheet affixed to a surface of a core material, preferably a core material comprising a honeycomb structure, and a back sheet affixed to an opposite surface of the core material. The invention may further comprise a sealing strip, preferably comprising EPDM, positioned between the glass mirror and the front surface of the composite panel. The invention also is of methods of making such solar collectors.

Secure Execution of Distributed Session Programs

Directory of Open Access Journals (Sweden)

Nuno Alves

2011-10-01

Full Text Available The development of the SJ Framework for session-based distributed programming is part of recent and ongoing research into integrating session types and practical, real-world programming languages. SJ programs featuring session types (protocols are statically checked by the SJ compiler to verify the key property of communication safety, meaning that parties engaged in a session only communicate messages, including higher-order communications via session delegation, that are compatible with the message types expected by the recipient. This paper presents current work on security aspects of the SJ Framework. Firstly, we discuss our implementation experience from improving the SJ Runtime platform with security measures to protect and augment communication safety at runtime. We implement a transport component for secure session execution that uses a modified TLS connection with authentication based on the Secure Remote Password (SRP protocol. The key technical point is the delicate treatment of secure session delegation to counter a previous vulnerability. We find that the modular design of the SJ Runtime, based on the notion of an Abstract Transport for session communication, supports rapid extension to utilise additional transports whilst separating this concern from the application-level session programming task. In the second part of this abstract, we formally prove the target security properties by modelling the extended SJ delegation protocols in the pi-calculus.

Neutron data compilation. Report of a Panel sponsored by the International Atomic Energy Agency and held in Brookhaven, 10-14 February 1969

Energy Technology Data Exchange (ETDEWEB)

NONE

1969-02-15

The IAEA organized and convened a Panel on Neutron Data Compilation. This Panel was organized by the Agency following the recommendations made by the International Nuclear Data Committee (INDC) which agreed that a general review of world neutron data compilation activities was desirable. In this context neutron data compilation encompasses the collection, storage and dissemination of bibliographic information and of qualitative and numerical data on the interaction of neutrons with nuclei and atoms for all incident energies. Such information and data have important applications in low energy neutron physics and many important. areas of nuclear technology. The principal objective of the Panel on Neutron Data Compilation, Which was held at Brookhaven National Laboratory during 10-14 February 1969, was to review how the world's principal data centers located at Brookhaven, Saclay, Obninsk and Vienna could ideally meet the demands and needs of experimental and theoretical neutron physicists, evaluators, reactor physicists as well as other existing and potential users. Fourteen papers were considered during formal sessions of the Panel and are reported on the following pages. The members of the Panel separated into five working groups to consider specific terms of references and make recommendations. Their reports were discussed.

Proficiency testing for sensory profile panels : measuring panel performance

NARCIS (Netherlands)

Mcewan, J.A.; Hunter, E.A.; Gemert, L.J. van; Lea, P.

2002-01-01

Proficiency testing in sensory analysis is an important step towards demonstrating that results from one sensory panel are consistent with the results of other sensory panels. The uniqueness of sensory analysis poses some specific problems for measuring the proficiency of the human instrument

Fabrication of metallic honeycomb panels for reusable TPS - structures

International Nuclear Information System (INIS)

Tabernig, B.; Thierfelder, W.; Alber, H.; Sudmeijer, K.

2001-01-01

The manufacturing technology with specific regard to high temperature brazing was developed to fabricate a honeycomb panel consisting of a thin-sectioned PM 2000 core material sandwiched on both sides with PM 1000 face sheets. For brazing the PM 1000 / PM 2000 panel the braze alloy PdNi was selected due to the best oxidation behavior while good mechanical properties and wetting behavior compared with other tested filler alloys. To examine the concept of a hybrid PM 1000/2000 panel as a stiffened skin panel a number of engineering test samples of sub-scale and two full-size panels were fabricated at Plansee AG and supplied to Fokker Space for testing under representative in-service conditions. Engineering tests showed that the test samples were rather insensitive to temperature gradients even at temperature differences between the face sheets of 550 o C. The engineering test samples exhibited no plastic deformation after testing at different heating rates ranging from 5 to 40 o C/s and at temperature profiles representative for two flights. The requirement for the designed application regarding impact properties at low as well as high speed were met. Impact at low speed with an energy of 8 J did not cause any cracks. Hail tests where ice bullets were fired with speeds to 208 m/s at different angles from 25 o to 90 o C against the test piece showed no damage at 25 o and caused slight indentation at 45 o and cracks at 90 o , which demonstrated a good performance for the fly through a hail cloud without any problems. In tests to determine the response of a full-size panel to a number of simulated thermo-mechanical flight load cycles the panel passed 50 cycles successfully without damage. (author)

Large thermal protection system panel

Science.gov (United States)

Weinberg, David J. (Inventor); Myers, Franklin K. (Inventor); Tran, Tu T. (Inventor)

2003-01-01

A protective panel for a reusable launch vehicle provides enhanced moisture protection, simplified maintenance, and increased temperature resistance. The protective panel includes an outer ceramic matrix composite (CMC) panel, and an insulative bag assembly coupled to the outer CMC panel for isolating the launch vehicle from elevated temperatures and moisture. A standoff attachment system attaches the outer CMC panel and the bag assembly to the primary structure of the launch vehicle. The insulative bag assembly includes a foil bag having a first opening shrink fitted to the outer CMC panel such that the first opening and the outer CMC panel form a water tight seal at temperatures below a desired temperature threshold. Fibrous insulation is contained within the foil bag for protecting the launch vehicle from elevated temperatures. The insulative bag assembly further includes a back panel coupled to a second opening of the foil bag such that the fibrous insulation is encapsulated by the back panel, the foil bag, and the outer CMC panel. The use of a CMC material for the outer panel in conjunction with the insulative bag assembly eliminates the need for waterproofing processes, and ultimately allows for more efficient reentry profiles.

Reflecting variable opening insulating panel

International Nuclear Information System (INIS)

Nungesser, W.T.

1976-01-01

A description is given of a reflecting variable opening insulating panel assembly, comprising a static panel assembly of reflecting insulation sheets forming a cavity along one side of the panel and a movable panel opening out by sliding from the cavity of the static panel, and a locking device for holding the movable panel in a position extending from the cavity of the static panel. This can apply to a nuclear reactor of which the base might require maintenance and periodical checking and for which it is desirable to have available certain processes for the partial dismantling of the insulation [fr

Puncture panel optimization

International Nuclear Information System (INIS)

Glass, R.E.; Longenbaugh, R.S.

1986-01-01

Sandia National Laboratories developed the TRansUranic PACkage Transporter (TRUPACT) to transport defense contact-handled transuranic wastes. The package has been designed to meet the normal and hypothetical accident conditions in 10CFR71 which includes the demonstrated ability to survive a 1-meter drop onto a mild steel pin. The puncture protection is provided by puncture resistant panels. In conjunction with the development of TRUPACT, a series of experiments has been conducted to reduce the weight of the puncture resistant panels. The initial scoping tests resulted in a preliminary design incorporating 30 layers of Kevlar. This design has been shown to meet the regulatory puncture test. To reduce the weight of this panel, subscale tests were conducted on panels utilizing Kevlar yarns with varying mass per unit length (denier) as well as different resins. This paper reviews the testing undertaken in the original panel development and discusses the results obtained from the recent subscale and full-scale optimization tests

77 FR 40914 - Arts and Artifacts Indemnity Panel Advisory Committee

Science.gov (United States)

2012-07-11

... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Arts and Artifacts Indemnity Panel Advisory Committee AGENCY: Federal Council on the Arts and the Humanities, National Endowment for the Humanities, National Foundation on the Arts and the Humanities. ACTION: Notice of meeting. SUMMARY: Pursuant to section...

Cavity Control and Panel Control Strategies in Double-Panel Structures for Transmitted Noise Reduction

NARCIS (Netherlands)

Ho, J.; Kalverboer, J.; Berkhoff, Arthur P.

2012-01-01

Investigation and comparisons of the cavity control and the panel control in a double-panel structure are presented in this paper. The double-panel structure, which comprises two panels with air in the gap, provides the advantages of low sound-transmission at high frequency, low heat-transmission

MO-F-201-00: PANEL DISCUSSION: Preparing for Parts 2 and 3 of the ABR Therapy Medical Physics Exam

Energy Technology Data Exchange (ETDEWEB)

NONE

2016-06-15

The goal of this session is to provide guidance to medical physicists undergoing the American Board of Radiology certification process in therapeutic medical physics. This panel discussion will focus on parts 2 (computer-based) and 3 (oral) of the examination. Unlike the latter portions of the exam which are specialty-driven, part 1 is universal for all medical physics fields and will not be addressed. This session is structured into different topics that aim to guide the participants on how to successfully prepare for the board exams. The subjects of discussion will include timing and strategies for exam preparation, crucial differences in preparing for the clinical computer-based exam versus the oral exam, what study tools are currently available for each, etc. The panel discussion format will allow the speakers to collectively present their experience and advice relating to each topic and foment audience participation. Learning Objectives: Know the main differences between what is expected for parts 2 and 3 Know different resources for test preparation Know how to formulate a plan to best study for each part based on the specific skill set the two parts require Know how to best present his/her answers during the oral examination – demeanor, answer structure, etc.

MO-F-201-00: PANEL DISCUSSION: Preparing for Parts 2 and 3 of the ABR Therapy Medical Physics Exam

International Nuclear Information System (INIS)

2016-01-01

The goal of this session is to provide guidance to medical physicists undergoing the American Board of Radiology certification process in therapeutic medical physics. This panel discussion will focus on parts 2 (computer-based) and 3 (oral) of the examination. Unlike the latter portions of the exam which are specialty-driven, part 1 is universal for all medical physics fields and will not be addressed. This session is structured into different topics that aim to guide the participants on how to successfully prepare for the board exams. The subjects of discussion will include timing and strategies for exam preparation, crucial differences in preparing for the clinical computer-based exam versus the oral exam, what study tools are currently available for each, etc. The panel discussion format will allow the speakers to collectively present their experience and advice relating to each topic and foment audience participation. Learning Objectives: Know the main differences between what is expected for parts 2 and 3 Know different resources for test preparation Know how to formulate a plan to best study for each part based on the specific skill set the two parts require Know how to best present his/her answers during the oral examination – demeanor, answer structure, etc.

Hepatic (Liver) Function Panel

Science.gov (United States)

... Educators Search English Español Blood Test: Hepatic (Liver) Function Panel KidsHealth / For Parents / Blood Test: Hepatic (Liver) ... kidneys ) is working. What Is a Hepatic (Liver) Function Panel? A liver function panel is a blood ...

Workshop: poster session

International Nuclear Information System (INIS)

Schell, W.R.; Colgan, P.A.

1990-01-01

The poster session consisted of a microcosm of projects encompassing the wide range of problems in the radioecology of natural and semi-natural ecosystems. The authors presented a brief resume of the poster at a plenary session during which highlights were pointed out. The range of studies covered microbial transfer, fungi, insects herbicides, lichens, solid speciation of cesium, soil properties, plant cover, transfer factors from soil to plants, uptake by sludge fertilizers, fertilizer remediation and compartmental models for soil-plant uptake. (author)

Panel Resonance Control and Cavity Control in Double-Panel Structures for Active Noise Reduction

NARCIS (Netherlands)

Ho, J.; Berkhoff, Arthur P.

2011-01-01

An analytical and experimental investigation of panel resonance control and cavity control in a double-panel structure is presented in this paper. The double-panel structure, which consists of two panels with air in the gap, is widely adopted in many applications such as aerospace due to its low

Intra-session and inter-session variability of nitric oxide pulmonary diffusing capacity in adults with cystic fibrosis.

Science.gov (United States)

Radtke, Thomas; Benden, Christian; Maggi-Beba, Marion; Kriemler, Susi; van der Lee, Ivo; Dressel, Holger

2017-12-01

We evaluated the intra-session and inter-session variability of the diffusing capacity of nitric oxide (DLNO), carbon monoxide (DLCO), alveolar-capillary membrane diffusing capacity for carbon monoxide (DMCO) and pulmonary capillary blood volume (Vc) in patients with cystic fibrosis (CF). Patients performed single-breath diffusing capacity measurements during all of 3 consecutive study visits. Precision of gas diffusing parameters was quantified by within-subject standard deviation (SD ws ) and coefficient of variation (CV). Intra-session and inter-session reproducibility was determined by SD ws *2.77. 15 clinically stable patients were included. The intra-session precision of gas diffusing parameters improved over the study visits. The inter-session SD ws for DLNO, DLCO, DMCO, and Vc was 4.8, 1.3, 2.4, and 4.3, respectively. Reproducibility was 13.3, 3.8, 6.7 and 12.0mLmin -1 mmHg -1 ; CV was 4.4, 4.7, 4.4 and 5.8%, respectively. The intra-session variability of DLNO, DLCO, DMCO and Vc improves with breath-hold maneuver training in test-naïve patients with CF, indicating a learning effect. Inter-session reproducibility data are lower than those previously reported in healthy subjects. Copyright © 2017 Elsevier B.V. All rights reserved.

Energy Production and Regional Economic Growth in China: A More Comprehensive Analysis Using a Panel Model

Directory of Open Access Journals (Sweden)

Yaobin Liu

2013-03-01

Full Text Available China has witnessed a fast economic growth in the recent two decades. However, the heavy energy exploitation seems to show a negative relation to regional economic growth. Thus, the issue is whether the energy production is a curse or blessing for the regional economic growth in China. The present study deploys a comprehensive approach to rigorously prove the validity of a proposed panel data model that includes a second generation panel unit root test and panel cointegration and a spatial panel model. The results from the second generation panel unit root test and panel cointegration allowing for cross-sectional dependences show the differenced series are stationary and there exists a cointegration relationship among these variables for all sub-regions. The results from the spatial panel data model support the conjecture of the spatial dependent and show that there is a “resource curse” only for the Western region and Central region in China.

Experimental Test for Benchmark 1--Deck Lid Inner Panel

International Nuclear Information System (INIS)

Xu Siguang; Lanker, Terry; Zhang, Jimmy; Wang Chuantao

2005-01-01

The Benchmark 1 deck lid inner is designed for both aluminum and steel based on a General Motor Corporation's current vehicle product. The die is constructed with a soft tool material. The die successfully produced aluminum and steel panels without splits and wrinkles. Detailed surface strains and thickness measurement were made at selected sections to include a wide range of deformation patterns from uniaxial tension mode to bi-axial tension mode. The springback measurements were done by using CMM machine along the part's hem edge which is critical to correct dimensional accuracy. It is expected that the data obtained will provide a useful source for forming and springback study on future automotive panels

The Public Poster Session

Science.gov (United States)

Levine-Rasky, Cynthia

2009-01-01

This note describes the use of a student poster session as an innovative approach to student learning. The local context for the assignment is provided, followed by a description of the course for which the poster was prepared, details about the assignment including its evaluation, and practical considerations for planning a poster session. The…

Performance comparison between silicon solar panel and dye-sensitized solar panel in Malaysia

Science.gov (United States)

Hamed, N. K. A.; Ahmad, M. K.; Urus, N. S. T.; Mohamad, F.; Nafarizal, N.; Ahmad, N.; Soon, C. F.; Ameruddin, A. S.; Faridah, A. B.; Shimomura, M.; Murakami, K.

2017-09-01

In carrying out experimental research in performance between silicon solar panel and dye-sensitive solar panel, we have been developing a device and a system. This system has been developed consisting of controllers, hardware and software. This system is capable to get most of the input sources. If only need to change the main circuit and coding for a different source input value. This device is able to get the ambient temperature, surface temperature, surrounding humidity, voltage with load, current with load, voltage without load and current without load and save the data into external memory. This device is able to withstand the heat and rain as it was fabricated in a waterproof box. This experiment was conducted to examine the performance of both the solar panels which are capable to maintain their stability and performance. A conclusion based on data populated, the distribution of data for dye-sensitized solar panel is much better than silicon solar panel as dye-sensitized solar panel is very sensitive to heat and not depend only on midday where is that is the maximum ambient temperature for both solar panel as silicon solar panel only can give maximum and high output only when midday.

Analysis of 3-panel and 4-panel microscale ionization sources

International Nuclear Information System (INIS)

Natarajan, Srividya; Parker, Charles B.; Glass, Jeffrey T.; Piascik, Jeffrey R.; Gilchrist, Kristin H.; Stoner, Brian R.

2010-01-01

Two designs of a microscale electron ionization (EI) source are analyzed herein: a 3-panel design and a 4-panel design. Devices were fabricated using microelectromechanical systems technology. Field emission from carbon nanotube provided the electrons for the EI source. Ion currents were measured for helium, nitrogen, and xenon at pressures ranging from 10 -4 to 0.1 Torr. A comparison of the performance of both designs is presented. The 4-panel microion source showed a 10x improvement in performance compared to the 3-panel device. An analysis of the various factors affecting the performance of the microion sources is also presented. SIMION, an electron and ion optics software, was coupled with experimental measurements to analyze the ion current results. The electron current contributing to ionization and the ion collection efficiency are believed to be the primary factors responsible for the higher efficiency of the 4-panel microion source. Other improvements in device design that could lead to higher ion source efficiency in the future are also discussed. These microscale ion sources are expected to find application as stand alone ion sources as well as in miniature mass spectrometers.

Viewers' perceptions of a YouTube music therapy session video.

Science.gov (United States)

Gregory, Dianne; Gooding, Lori G

2013-01-01

Recent research revealed diverse content and varying levels of quality in YouTube music therapy videos and prompted questions about viewers' discrimination abilities. This study compares ratings of a YouTube music therapy session video by viewers with different levels of music therapy expertise to determine video elements related to perceptions of representational quality. Eighty-one participants included 25 novices (freshmen and sophomores in an introductory music therapy course), 25 pre-interns (seniors and equivalency students who had completed all core Music Therapy courses), 26 professionals (MT-BC or MT-BC eligibility) with a mean of 1.75 years of experience, and an expert panel of 5 MT-BC professionals with a mean of 11 years of experience in special education. After viewing a music therapy special education video that in previous research met basic competency criteria and professional standards of the American Music Therapy Association, participants completed a 16-item questionnaire. Novices' ratings were more positive (less discriminating) compared to experienced viewers' neutral or negative ratings. Statistical analysis (ANOVA) of novice, pre-intern, and professional ratings of all items revealed significant differences p, .05) for specific therapy content and for a global rating of representational quality. Experienced viewers' ratings were similar to the expert panel's ratings. Content analysis of viewers' reasons for their representational quality ratings corroborated ratings of therapy-specific content. A video that combines and clearly depicts therapy objectives, client improvement, and the effectiveness of music within a therapeutic intervention best represent the music therapy profession in a public social platform like YouTube.

Antinuclear antibody panel

Science.gov (United States)

... page: //medlineplus.gov/ency/article/003535.htm Antinuclear antibody panel To use the sharing features on this page, please enable JavaScript. The antinuclear antibody panel is a blood test that looks at ...

Hepatitis virus panel

Science.gov (United States)

... page: //medlineplus.gov/ency/article/003558.htm Hepatitis virus panel To use the sharing features on this page, please enable JavaScript. The hepatitis virus panel is a series of blood tests used ...

REINFORCED COMPOSITE PANEL

DEFF Research Database (Denmark)

2003-01-01

A composite panel having front and back faces, the panel comprising facing reinforcement, backing reinforcement and matrix material binding to the facing and backing reinforcements, the facing and backing reinforcements each independently comprising one or more reinforcing sheets, the facing rein...... by matrix material, the facing and backing reinforcements being interconnected to resist out-of-plane relative movement. The reinforced composite panel is useful as a barrier element for shielding structures, equipment and personnel from blast and/or ballistic impact damage....

Linearly Refined Session Types

Directory of Open Access Journals (Sweden)

Pedro Baltazar

2012-11-01

Full Text Available Session types capture precise protocol structure in concurrent programming, but do not specify properties of the exchanged values beyond their basic type. Refinement types are a form of dependent types that can address this limitation, combining types with logical formulae that may refer to program values and can constrain types using arbitrary predicates. We present a pi calculus with assume and assert operations, typed using a session discipline that incorporates refinement formulae written in a fragment of Multiplicative Linear Logic. Our original combination of session and refinement types, together with the well established benefits of linearity, allows very fine-grained specifications of communication protocols in which refinement formulae are treated as logical resources rather than persistent truths.

Rational Design of Composite Panels

DEFF Research Database (Denmark)

Riber, Hans Jørgen

1996-01-01

A non-linear structural model for composite panels is presented. The non-linear terms in the lateral displacements are modelled as an additional set of lateral loads acting on the panel. Hence the solution is reduced to that of an equivalent panel with small displacements In order to treat sandwich...... Norske Veritas', DNV, building rules concerning high-speed light craft, in which the panel scantlings are often restricted by a maximum lateral deflection connected with the panel span....

Face-Sheet Quality Analysis and Thermo-Physical Property Characterization of OOA and Autoclave Panels

Science.gov (United States)

Miller, Sandi G.; Lort, Richard D., III; Zimmerman, Thomas J.; Sutter, James K.; Pelham, Larry I.; McCorkle, Linda S.; Scheiman, Daniel A.

2012-01-01

Increased application of polymer matrix composite (PMC) materials in large vehicle structures requires consideration of non-autoclave manufacturing technology. The NASA Composites for Exploration project, and its predecessor, Lightweight Spacecraft Structures and Materials project, were tasked with the development of materials and manufacturing processes for structures that will perform in a heavy-lift-launch vehicle environment. Both autoclave and out of autoclave processable materials were considered. Large PMC structures envisioned for such a vehicle included the payload shroud and the interstage connector. In this study, composite sandwich panels representing 1/16th segments of the barrel section of the Ares V rocket fairing were prepared as 1.8 m x 2.4 m sections of the 10 m diameter arc segment. IM7/977-3 was used as the face-sheet prepreg of the autoclave processed panels and T40-800B/5320-1 for the out of autoclave panels. The core was 49.7 kg/sq m (3.1 lb/cu ft (pcf)) aluminum honeycomb. Face-sheets were fabricated by automated tape laying 153 mm wide unidirectional tape. This work details analysis of the manufactured panels where face-sheet quality was characterized by optical microscopy, cured ply thickness measurements, acid digestion, and thermal analysis.

Composite panel development at JPL

Science.gov (United States)

Mcelroy, Paul; Helms, Rich

1988-01-01

Parametric computer studies can be use in a cost effective manner to determine optimized composite mirror panel designs. An InterDisciplinary computer Model (IDM) was created to aid in the development of high precision reflector panels for LDR. The materials properties, thermal responses, structural geometries, and radio/optical precision are synergistically analyzed for specific panel designs. Promising panels designs are fabricated and tested so that comparison with panel test results can be used to verify performance prediction models and accommodate design refinement. The iterative approach of computer design and model refinement with performance testing and materials optimization has shown good results for LDR panels.

Dynamics of students’ physical fitness during sectional crossfit and football sessions

Directory of Open Access Journals (Sweden)

Valeriy Hrygoriev

2017-12-01

Full Text Available Purpose: to assess the influence of crossfit and football in the sectional work on physical education on the dynamics of physical fitness of students. Material & Methods: studies of the level of physical preparedness of students were carried out with the help of two tests before and after the introduction of experimental techniques in the survey groups. Two experimental (18 girls, 16 boys and two control groups (22 girls and boys from the 2nd year students of the Kherson State University. Results: the analysis of the physical readiness of the students of the University was carried out under the influence of the classes of crossfit and football in the framework of the sectional work on physical education on the dynamics of the indicators of the development of high-speed, strength and speed-strength qualities, the development of agility and flexibility. Conclusion: use of developed methodological approaches to the application of sectional forms of physical education contributed to significant changes in the indicators of physical preparedness.

Supersonic Panel Flutter Test Results for Flat Fiber-Glass Sandwich Panels with Foamed Cores

Science.gov (United States)

Tuovila, W. J.; Presnell, John G., Jr.

1961-01-01

Flutter tests have been made on flat panels having a 1/4 inch-thick plastic-foam core covered with thin fiber-glass laminates. The testing was done in the Langley Unitary Plan wind tunnel at Mach numbers from 1.76 t o 2.87. The flutter boundary for these panels was found to be near the flutter boundary of thin metal panels when compared on the basis of an equivalent panel stiffness. The results also demonstrated that the depth of the cavity behind the panel has a pronounced influence on flutter. Changing the cavity depth from 1 1/2 inches to 1/2 inch reduced the dynamic pressure at start of flutter by 40 percent. No flutter was obtained when the spacers on the back of the panel were against the bottom of the cavity.

Panel Resource Management (PRM) Implementation and Effects within Safety Review Panel Settings and Dynamics

Science.gov (United States)

Taylor, Robert W.; Nash, Sally K.

2007-01-01

While technical training and advanced degree's assure proficiency at specific tasks within engineering disciplines, they fail to address the potential for communication breakdown and decision making errors familiar to multicultural environments where language barriers, intimidating personalities and interdisciplinary misconceptions exist. In an effort to minimize these pitfalls to effective panel review, NASA's lead safety engineers to the ISS Safety Review Panel (SRP), and Payload Safety Review Panel (PSRP) initiated training with their engineers, in conjunction with the panel chairs, and began a Panel Resource Management (PRM) program. The intent of this program focuses on the ability to reduce the barriers inhibiting effective participation from all panel attendees by bolstering participants confidence levels through increased communication skills, situational awareness, debriefing, and a better technical understanding of requirements and systems.

Solar panel cleaning robot

Science.gov (United States)

Nalladhimmu, Pavan Kumar Reddy; Priyadarshini, S.

2018-04-01

As the demand of electricity is increasing, there is need to using the renewable sources to produce the energy at present of power shortage, the use of solar energy could be beneficial to great extent and easy to get the maximum efficiency. There is an urgent in improving the efficiency of solar power generation. Current solar panels setups take a major power loss when unwanted obstructions cover the surface of the panels. To make solar energy more efficiency of solar array systems must be maximized efficiency evaluation of PV panels, that has been discussed with particular attention to the presence of dust on the efficiency of the PV panels have been highlighted. This paper gives the how the solar panel cleaning system works and designing of the cleaning system.

Lightweight, Thermally Insulating Structural Panels

Science.gov (United States)

Eisen, Howard J.; Hickey, Gregory; Wen, Liang-Chi; Layman, William E.; Rainen, Richard A.; Birur, Gajanana C.

1996-01-01

Lightweight, thermally insulating panels that also serve as structural members developed. Honeycomb-core panel filled with low-thermal-conductivity, opacified silica aerogel preventing convection and minimizes internal radiation. Copper coating on face sheets reduces radiation. Overall thermal conductivities of panels smaller than state-of-art commercial non-structurally-supporting foam and fibrous insulations. On Earth, panels suitable for use in low-air-pressure environments in which lightweight, compact, structurally supporting insulation needed; for example, aboard high-altitude aircraft or in partially evacuated panels in refrigerators.

PERBANDINGAN UNJUK KERJA ANTARA PANEL SEL SURYA BERPENJEJAK DENGAN PANEL SEL SURYA DIAM

OpenAIRE

Syafaruddin Ch

2010-01-01

The ability to produce electrical energy at Solar Power Plant  is highly dependent on the magnitude and duration of sun exposure on the solar cell panels. The movement of the sun from east to west that periodicity in every day is a problem at  the  optimization generation of electricity at  Solar Power Plant   if using solar panel that motionless. This is because the solar cell panel can not catch the maximum sun exposure. To solve the above problem then designed a solar cell panel  tracker...

METHOD OF SOFTWARE-BASED COMPENSATION OF TECHNOLOGICAL VARIATION IN CHROMATICITY COORDINATES OF LCD PANELS

Directory of Open Access Journals (Sweden)

I. O. Zharinov

2015-05-01

chromaticity coordinates of liquid crystal panel was estimated by the ratio criterion of the areas of cross sections of the histograms p(x,y at a given probability confidence level, calculated before and after compensation procedure. The sections of histograms, representing distributions of chromaticity coordinates were obtained by mathematical simulation in MathCad 15.0. The simulation software of the method of software-based compensation gives the possibility to obtain the mutual arrangement between the figures formed by sections of the histograms of (x,y-chromaticity coordinates, and it may be observed as significant reduction of the area after compensation procedure is performed, and changes in the geometry of the cross section shape as well. Sets of dependency curves were obtained, depicting the efficiency criterion value versus resolution of the colorimeter that is used for measuring the chromaticity coordinates. Practical relevance. Research results are usable for engineers who are designing modern indication equipment based on LCD-panels and by manufacturers for colorimetric calculations and for estimation of technological tolerance of chromaticity coordinates among display units in mass production as well.

Panel data analysis using EViews

CERN Document Server

Agung, I Gusti Ngurah

2013-01-01

A comprehensive and accessible guide to panel data analysis using EViews software This book explores the use of EViews software in creating panel data analysis using appropriate empirical models and real datasets. Guidance is given on developing alternative descriptive statistical summaries for evaluation and providing policy analysis based on pool panel data. Various alternative models based on panel data are explored, including univariate general linear models, fixed effect models and causal models, and guidance on the advantages and disadvantages of each one is given. Panel Data Analysis

RECIPANEL: RECYCLED PAPER PANELS

Directory of Open Access Journals (Sweden)

HERNÁN CAÑOLA

2012-01-01

Full Text Available En este artículo se estudia la fabricación y el comportamiento mecánico de paneles a base de papel reciclado. El objetivo principal del proyecto es producir un prototipo de panel que emplee elementos provenientes de residuos sólidos (papel periódico y de un material conglomerante (cemento Portland blanco. El panel debe ser económico, debe tener buenas propiedades mecánicas y debe tener dimensiones comerciales para su uso en muros tabiques y en cielos falsos en la industria de la construcción. El Recipanel es un panel no estructural a base de papel reciclado. El Recipanel cumple las normas colombianas en lo relativo a los paneles de uso no estructural y presenta además unas excelentes características mecánicas.

Session Report - S. Voinis (Andra)

International Nuclear Information System (INIS)

Voinis, Sylvie

2014-01-01

The session addressed key issues related to the industrial feasibility of construction. It covered the implementer and regulator points of view. The conclusions derive from three presentations completed by the outcomes of six WG. At the Morsleben Repository, Germany, the licensing of the closure of the repository has been initiated by BfS. The closure concept is based on extensive backfilling with salt concrete complemented by seals. In order to demonstrate the feasibility of constructing such a seal structure an in-situ experiment is performed in a drift of the repository. In the UK, the framework for implementing geological disposal of the higher activity radioactive waste is described in the White Paper published by the UK Government in June 2008. The process to site a facility will be staged and based on voluntarism and partnership with local communities. This process is in its early stage. The paper outlines the work being undertaken by the NDA. In canada, Ontario Power Generation (OPG) has submitted information required for a CNSC licence to prepare the site and construct a DGR for the disposal of low and intermediate level waste from the operation of their nuclear power reactors. That submission includes an Environmental Impact Statement (EIS), as required for a Panel Review under the Canadian Environmental Assessment Act (CEAA), and the information required for a licence application under the NSCA Regulations. Discussions between the proponent and the regulator in the pre-licensing phase, clarified CNSC expectations for the characterization of the site and for the development of the EIS and application. They also helped to ensure that OPG understood these expectations. Outcomes WG session-1: - Start with construction but during operational phase: Simultaneous construction and operation activities. - Need for technical requirements/criteria: So that it can be judged whether 'products' meet the requirements; LT safety issues to be considered during

Summary of Technical Sessions - Summary and Recommendations

International Nuclear Information System (INIS)

2013-01-01

Technical Session 1 - Development achievements of BEPU methods and State of the Art: The objective of this session was to present the different approaches dealing with Best Estimate codes and uncertainties evaluations. Existing methods were summarized and different papers were focused on specific methods stressing their bases, peculiarities, advantages and limitations. As a result of the session a picture of the current State of the Art was obtained. The session comprised six papers. Technical Session 2 - International comparative activities: This session had as a main objective to review the activities launched in the past and present from the NEA in connection with BEPU methods, with focus on the applicability of conclusions derived from former benchmarks like UMS, the main outcomes of the recently finished BEMUSE project, and the objectives and relevance of UAM and PREMIUM projects. The session comprised four papers. Technical Session 3 - Applications: Licensing, safety analysis support, regulatory body views and industry activities: This session focused on the application of current methods in safety analyses. Contributions from industry, technical safety organizations and regulatory bodies were provided. As a result, a view of the penetration of BEPU methods in current safety analyses was obtained, as well as an indication of the evolution in the near future. Elements such as licensing practices, assessment process, etc. were considered. The session comprised nine papers. Technical Session 4. BEPU methods extension to new fields The session addressed the extension of BEPU methods beyond their current use. By now such methods are mainly applied to classic deterministic environment but it is believed that their benefits could be extended to other fields. Seven papers were presented in the session dealing with subjects that fit in the objectives established in the workshop programme. The papers cover areas like: extension to CFD, quantification of global safety

Control room, emergency control system and local control panels in nuclear power plants

International Nuclear Information System (INIS)

1988-01-01

The requirements on planning and construction of control boards including ergonomic-technical designing are specified in this rule. The specifications put the requirements on the design of place, process and environment of work, which are mentioned in the sections 90 and 91 of the labor-management relations act, into more concrete terms for the safety-relevant control panels as work places in a nuclear power station. The work places at control panels are not considered as video workstations in the sense of the 'Safety Rules for Video Workstations in the Office Sector' published by the General Association of the Industrial Trade Associations. The requirements are based on the operation and information technology realized at present in control panels of stationary nuclear power plants. (orig./HP) [de

Panel Unit Root Tests by Combining Dependent Values: A Comparative Study

Directory of Open Access Journals (Sweden)

Xuguang Sheng

2011-01-01

Full Text Available We conduct a systematic comparison of the performance of four commonly used value combination methods applied to panel unit root tests: the original Fisher test, the modified inverse normal method, Simes test, and the modified truncated product method (TPM. Our simulation results show that under cross-section dependence the original Fisher test is severely oversized, but the other three tests exhibit good size properties. Simes test is powerful when the total evidence against the joint null hypothesis is concentrated in one or very few of the tests being combined, but the modified inverse normal method and the modified TPM have good performance when evidence against the joint null is spread among more than a small fraction of the panel units. These differences are further illustrated through one empirical example on testing purchasing power parity using a panel of OECD quarterly real exchange rates.

Make Your Own Solar Panel.

Science.gov (United States)

Suzuki, David

1992-01-01

Presents an activity in which students make a simulated solar panel to learn about the principles behind energy production using solar panels. Provides information about how solar panels function to produce energy. (MCO)

Solar panel parallel mounting configuration

Science.gov (United States)

Mutschler, Jr., Edward Charles (Inventor)

1998-01-01

A spacecraft includes a plurality of solar panels interconnected with a power coupler and an electrically operated device to provide power to the device when the solar cells are insolated. The solar panels are subject to bending distortion when entering or leaving eclipse. Spacecraft attitude disturbances are reduced by mounting each of the solar panels to an elongated boom made from a material with a low coefficient of thermal expansion, so that the bending of one panel is not communicated to the next. The boom may be insulated to reduce its bending during changes in insolation. A particularly advantageous embodiment mounts each panel to the boom with a single mounting, which may be a hinge. The single mounting prevents transfer of bending moments from the panel to the boom.

Mounting clips for panel installation

Science.gov (United States)

Cavieres, Andres; Al-Haddad, Tristan; Goodman, Joseph

2017-07-11

A photovoltaic panel mounting clip comprising a base, central indexing tabs, flanges, lateral indexing tabs, and vertical indexing tabs. The mounting clip removably attaches one or more panels to a beam or the like structure, both mechanically and electrically. It provides secure locking of the panels in all directions, while providing guidance in all directions for accurate installation of the panels to the beam or the like structure.

T-section glulam timber bridge modules : modeling and performance

Science.gov (United States)

Paul A. Morgan; Steven E. Taylor; Michael A. Ritter; John M. Franklin

1999-01-01

This paper describes the design, modeling, and testing of two portable timber bridges, each consisting of two noninterconnected longitudinal glued-laminated timber (glulam) deck panels 1.8 m (6 ft) wide. One bridge is 12.2 m (40 ft) long while the other bridge is 10.7 m (35 ft) long. The deck panels are fabricated in a unique double-tee cross section. The bridges...

The Neuromuscular, Biochemical, and Endocrine Responses to a Single-Session Vs. Double-Session Training Day in Elite Athletes.

Science.gov (United States)

Johnston, Michael J; Cook, Christian J; Drake, David; Costley, Lisa; Johnston, Julie P; Kilduff, Liam P

2016-11-01

Johnston, MJ, Cook, CJ, Drake, D, Costley, L, Johnston, JP, and Kilduff, LP. The neuromuscular, biochemical, and endocrine responses to a single-session vs. double-session training day in elite athletes. J Strength Cond Res 30(11): 3098-3106, 2016-The aim of this study was to compare the acute neuromuscular, biochemical, and endocrine responses of a training day consisting of a speed session only with performing a speed-and-weights training session on the same day. Fifteen men who were academy-level rugby players completed 2 protocols in a randomized order. The speed-only protocol involved performing 6 maximal effort repetitions of 50-m running sprints with 5 minutes of recovery between each sprint, whereas the speed-and-weights protocol involved the same sprinting session but was followed 2 hours later by a lower-body weights session consisting of 4 sets of 5 backsquats and Romanian deadlift at 85% one repetition maximum. Testosterone, cortisol, creatine kinase, lactate, and perceived muscle soreness were determined immediately before, immediately after, 2 hours after, and 24 hours after both the protocols. Peak power, relative peak power, jump height, and average rate of force development were determined from a countermovement jump (CMJ) at the same time points. After 24-hours, muscle soreness was significantly higher after the speed-and-weights protocol compared with the speed-only protocol (effect size η = 0.253, F = 4.750, p ≤ 0.05). There was no significant difference between any of the CMJ variables at any of the posttraining time points. Likewise, creatine kinase, testosterone, and cortisol were unaffected by the addition of a weight-training session. These data indicate that the addition of a weight-training session 2 hours after a speed session, whereas increasing the perception of fatigue the next day does not result in a difference in endocrine response or in neuromuscular capability.

Poster Sessions in Marketing Education: An Empirical Examination

Science.gov (United States)

Stegemann, Nicole; Sutton-Brady, Catherine

2009-01-01

Poster sessions provide a creative and stimulating alternative to traditional assessment methods in marketing. Poster sessions, as a means of assessment, have long been used in science fields. This article presents the successful implementation of poster sessions as a means of assessment in a postgraduate unit of study. Poster sessions in…

Attendance at NHS mandatory training sessions.

Science.gov (United States)

Brand, Darren

2015-02-17

To identify factors that affect NHS healthcare professionals' attendance at mandatory training sessions. A quantitative approach was used, with a questionnaire sent to 400 randomly selected participants. A total of 122 responses were received, providing a mix of qualitative and quantitative data. Quantitative data were analysed using statistical methods. Open-ended responses were reviewed using thematic analysis. Clinical staff value mandatory training sessions highly. They are aware of the requirement to keep practice up-to-date and ensure patient safety remains a priority. However, changes to the delivery format of mandatory training sessions are required to enable staff to participate more easily, as staff are often unable to attend. The delivery of mandatory training should move from classroom-based sessions into the clinical area to maximise participation. Delivery should be assisted by local 'experts' who are able to customise course content to meet local requirements and the requirements of different staff groups. Improved arrangements to provide staff cover, for those attending training, would enable more staff to attend training sessions.

Using session types as an effect system

Directory of Open Access Journals (Sweden)

Dominic Orchard

2016-02-01

Full Text Available Side effects are a core part of practical programming. However, they are often hard to reason about, particularly in a concurrent setting. We propose a foundation for reasoning about concurrent side effects using sessions. Primarily, we show that session types are expressive enough to encode an effect system for stateful processes. This is formalised via an effect-preserving encoding of a simple imperative language with an effect system into the pi-calculus with session primitives and session types (into which we encode effect specifications. This result goes towards showing a connection between the expressivity of session types and effect systems. We briefly discuss how the encoding could be extended and applied to reason about and control concurrent side effects.

Are fluctuations in energy consumption per capita transitory? Evidence from a panel of Pacific Island countries

International Nuclear Information System (INIS)

Mishra, Vinod; Sharma, Susan; Smyth, Russell

2009-01-01

This study applies the panel stationarity test developed by [Carrion-i-Silvestre et al 2005. Breaking the panels: An application to GDP per capita. Econometrics Journal 8, 159-175] to examine the stationarity of energy consumption per capita for a panel of 13 Pacific Island countries over the period 1980-2005. This test has the advantage that it allows for multiple structural breaks at unknown dates that can differ across countries and can account for all forms of cross-sectional correlation between countries. The conclusion from the study is that energy consumption per capita in approximately 60% of countries is stationary and that energy consumption per capita for the panel as a whole is stationary. The study offers several suggestions for modelling energy consumption and policy-making in the Pacific Islands.

Are fluctuations in energy consumption per capita transitory? Evidence from a panel of Pacific Island countries

Energy Technology Data Exchange (ETDEWEB)

Mishra, Vinod [Department of Economics, Monash University, Clyde Road Berwick, VIC. 3086 (Australia); Sharma, Susan [School of Economics, University of the South Pacific, Suva (Fiji); Smyth, Russell [Department of Economics, Monash University, 900 Dandenong Road, Caulfield East, VIC. 3145 (Australia)

2009-06-15

This study applies the panel stationarity test developed by [Carrion-i-Silvestre et al 2005. Breaking the panels: An application to GDP per capita. Econometrics Journal 8, 159-175] to examine the stationarity of energy consumption per capita for a panel of 13 Pacific Island countries over the period 1980-2005. This test has the advantage that it allows for multiple structural breaks at unknown dates that can differ across countries and can account for all forms of cross-sectional correlation between countries. The conclusion from the study is that energy consumption per capita in approximately 60% of countries is stationary and that energy consumption per capita for the panel as a whole is stationary. The study offers several suggestions for modelling energy consumption and policy-making in the Pacific Islands. (author)

78 FR 41937 - Joint Meeting of the Gastroenterology-Urology Panel and the Radiological Devices Panel of the...

Science.gov (United States)

2013-07-12

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2013-N-0816] Joint Meeting of the Gastroenterology-Urology Panel and the Radiological Devices Panel of the Medical...: Gastroenterology-Urology Panel and Radiological Devices Panel of the Medical Devices Advisory Committee. General...

21 CFR 328.50 - Principal display panel of all OTC drug products intended for oral ingestion that contain alcohol.

Science.gov (United States)

2010-04-01

... 21 Food and Drugs 5 2010-04-01 2010-04-01 false Principal display panel of all OTC drug products intended for oral ingestion that contain alcohol. 328.50 Section 328.50 Food and Drugs FOOD AND DRUG... PRODUCTS INTENDED FOR ORAL INGESTION THAT CONTAIN ALCOHOL Labeling § 328.50 Principal display panel of all...

Graph Transformation for Consolidation of Creativity Sessions Results

DEFF Research Database (Denmark)

Dolog, Peter

2010-01-01

Graph transformation approach for consolidation of creativity sessions results is part of the FP7 EU/IST project idSpace: Tooling of and training for collaborative, distributed product innovation. The goal of graph transformation approach is to provide a tool for merging results of various sessions...... (such as brainstorming sessions), which are represented as graphs, when the session participants- are physically distributed....

Review for session K - benchmarks

International Nuclear Information System (INIS)

McCracken, A.K.

1980-01-01

Eight of the papers to be considered in Session K are directly concerned, at least in part, with the Pool Critical Assembly (P.C.A.) benchmark at Oak Ridge. The remaining seven papers in this session, the subject of this review, are concerned with a variety of topics related to the general theme of Benchmarks and will be considered individually

Session 2: Machine studies

International Nuclear Information System (INIS)

Assmann, R.W.; Papotti, G.

2012-01-01

This document summarizes the talks and discussion that took place in the second session of the Chamonix 2012 workshop concerning results from machine studies performed in 2011. The session consisted of the following presentations: -) LHC experience with different bunch spacings by G. Rumolo; -) Observations of beam-beam effects in MDs in 2011 by W. Herr; -) Beam-induced heating/ bunch length/RF and lessons for 2012 by E. Metral; -) Lessons in beam diagnostics by R. Jones; -) Quench margins by M. Sapinski; and -) First demonstration with beam of the Achromatic Telescopic Squeeze (ATS) by S. Fartoukh. (authors)

Use of Internet panels to conduct surveys.

Science.gov (United States)

Hays, Ron D; Liu, Honghu; Kapteyn, Arie

2015-09-01

The use of Internet panels to collect survey data is increasing because it is cost-effective, enables access to large and diverse samples quickly, takes less time than traditional methods to obtain data for analysis, and the standardization of the data collection process makes studies easy to replicate. A variety of probability-based panels have been created, including Telepanel/CentERpanel, Knowledge Networks (now GFK KnowledgePanel), the American Life Panel, the Longitudinal Internet Studies for the Social Sciences panel, and the Understanding America Study panel. Despite the advantage of having a known denominator (sampling frame), the probability-based Internet panels often have low recruitment participation rates, and some have argued that there is little practical difference between opting out of a probability sample and opting into a nonprobability (convenience) Internet panel. This article provides an overview of both probability-based and convenience panels, discussing potential benefits and cautions for each method, and summarizing the approaches used to weight panel respondents in order to better represent the underlying population. Challenges of using Internet panel data are discussed, including false answers, careless responses, giving the same answer repeatedly, getting multiple surveys from the same respondent, and panelists being members of multiple panels. More is to be learned about Internet panels generally and about Web-based data collection, as well as how to evaluate data collected using mobile devices and social-media platforms.

Breakout Sessions

CERN Multimedia

CERN. Geneva

2004-01-01

Participants are split into small groups for detailed discussion on their chosen topic. To register please click on 'See details' link from the agenda and then on the link to send an email to the session for which you would like to book. Please don't change the subject line of the email.

Micro-inverter solar panel mounting

Science.gov (United States)

Morris, John; Gilchrist, Phillip Charles

2016-02-02

Processes, systems, devices, and articles of manufacture are provided. Each may include adapting micro-inverters initially configured for frame-mounting to mounting on a frameless solar panel. This securement may include using an adaptive clamp or several adaptive clamps secured to a micro-inverter or its components, and using compressive forces applied directly to the solar panel to secure the adaptive clamp and the components to the solar panel. The clamps can also include compressive spacers and safeties for managing the compressive forces exerted on the solar panels. Friction zones may also be used for managing slipping between the clamp and the solar panel during or after installation. Adjustments to the clamps may be carried out through various means and by changing the physical size of the clamps themselves.

Acoustic Panel Liner for an Engine Nacelle

Science.gov (United States)

Jones, Michael G. (Inventor); Nark, Douglas M. (Inventor); Ayle, Earl (Inventor); Ichihashi, Fumitaka (Inventor)

2016-01-01

An acoustic panel liner includes a face sheet, back plate, and liner core positioned there-between, which may be used in an engine nacelle. Elongated chambers contain variable amounts of septa at a calibrated depth or depths. The septa may have varying DC flow resistance. The chambers may have a hexagonal or other polygonal cross sections. The septa, such as mesh caps, may be bonded to an inner wall of a corresponding chamber. The insertion depths may be the same or different. If different, the pattern of distribution of the depths may be randomized.

Energy, human capital and economic growth in Asia Pacific countries — Evidence from a panel cointegration and causality analysis

International Nuclear Information System (INIS)

Fang, Zheng; Chang, Youngho

2016-01-01

This paper examines the cointegration and causal relationship between energy consumption and economic development in 16 Asia Pacific countries over the period 1970–2011 using the augmented production function which considers not only physical capital and labor but also human capital. This is likely among the first of the energy–growth nexus literature to include human capital in the multivariate framework. Using recently developed panel unit root test and cointegration test that allow for cross-sectional dependence, this paper finds a long-run cointegrating relationship between these variables. Continuously-updated fully modified (Cup-FM) estimates are subsequently compared with panel heterogeneous fully modified ordinary least squares (FMOLS) results to confirm the importance of accounting for interdependence across countries. The bootstrap panel Granger causality test results find economic growth Granger cause energy use in the region but the relationship varies for individual countries. - Highlights: • We study the causal link between energy and growth in 16 AP countries for 1970–2011. • Human capital is for the first time incorporated into the multivariate framework. • Recent panel methods allowing for cross sectional dependence is used. • Bootstrap panel Granger causality test results find GDP Granger causing energy use in the region. • The energy–growth relationship varies for individual countries.

1994 Panel 1 Utilization Plan

International Nuclear Information System (INIS)

1994-01-01

The Waste Isolation Pilot Plant (WIPP) is intended to receive, handle, and permanently dispose of transuranic (TRU) waste. To fulfill this mission, the U.S. Department of Energy (DOE) constructed a full-scale facility to demonstrate both technical and operational principles of the permanent isolation of TRU waste. The WIPP consists of surface and underground facilities. Panel 1 is situated in the underground facility horizon which is located approximately 2,150 feet below the surface in the predominantly halite Salado Formation. The Panel 1 Utilization Plan provides a strategy for the optimum use of Panel 1 which is consistent with the priorities established by the DOE to accomplish the WIPP mission. These priorities, which include maintaining personnel safety, conducting performance assessment, and continued operational enhancements, are the guiding premise for the decisions on the planned usage of the WIPP underground facility. The continuation of ongoing investigations along with the planned testing and training to be carried out in Panel 1 will enhance the current knowledge and understanding of the operational and geotechnical aspects of the panel configuration. This enhancement will ultimately lead to safer, more efficient, and more cost-effective methods of operation. Excavation of the waste storage area began in May 1986 with the mining of entries to Panel 1. The original design for the waste storage rooms at the WIPP provided a limited period of time during which to mine the openings and to emplace waste. Each panel, consisting of seven storage rooms, was scheduled to be mined and filled in less than 5 years. Panel 1 was developed to receive waste for a demonstration phase that was scheduled to start in October 1988. The demonstration phase was deferred, and the experimental test program was modified to use contact-handled (CH) transuranic waste in bin-scale tests, planned for Room 1, Panel 1

Flexible session management in a distributed environment

Energy Technology Data Exchange (ETDEWEB)

Miller, Zach; /Wisconsin U., Madison; Bradley, Dan; /Wisconsin U., Madison; Tannenbaum, Todd; /Wisconsin U., Madison; Sfiligoi, Igor; /Fermilab

2010-01-01

Many secure communication libraries used by distributed systems, such as SSL, TLS, and Kerberos, fail to make a clear distinction between the authentication, session, and communication layers. In this paper we introduce CEDAR, the secure communication library used by the Condor High Throughput Computing software, and present the advantages to a distributed computing system resulting from CEDAR's separation of these layers. Regardless of the authentication method used, CEDAR establishes a secure session key, which has the flexibility to be used for multiple capabilities. We demonstrate how a layered approach to security sessions can avoid round-trips and latency inherent in network authentication. The creation of a distinct session management layer allows for optimizations to improve scalability by way of delegating sessions to other components in the system. This session delegation creates a chain of trust that reduces the overhead of establishing secure connections and enables centralized enforcement of system-wide security policies. Additionally, secure channels based upon UDP datagrams are often overlooked by existing libraries; we show how CEDAR's structure accommodates this as well. As an example of the utility of this work, we show how the use of delegated security sessions and other techniques inherent in CEDAR's architecture enables US CMS to meet their scalability requirements in deploying Condor over large-scale, wide-area grid systems.

Flexible session management in a distributed environment

International Nuclear Information System (INIS)

Miller, Zach; Bradley, Dan; Tannenbaum, Todd; Sfiligoi, Igor

2010-01-01

Many secure communication libraries used by distributed systems, such as SSL, TLS, and Kerberos, fail to make a clear distinction between the authentication, session, and communication layers. In this paper we introduce CEDAR, the secure communication library used by the Condor High Throughput Computing software, and present the advantages to a distributed computing system resulting from CEDAR's separation of these layers. Regardless of the authentication method used, CEDAR establishes a secure session key, which has the flexibility to be used for multiple capabilities. We demonstrate how a layered approach to security sessions can avoid round-trips and latency inherent in network authentication. The creation of a distinct session management layer allows for optimizations to improve scalability by way of delegating sessions to other components in the system. This session delegation creates a chain of trust that reduces the overhead of establishing secure connections and enables centralized enforcement of system-wide security policies. Additionally, secure channels based upon UDP datagrams are often overlooked by existing libraries; we show how CEDAR's structure accommodates this as well. As an example of the utility of this work, we show how the use of delegated security sessions and other techniques inherent in CEDAR's architecture enables US CMS to meet their scalability requirements in deploying Condor over large-scale, wide-area grid systems.

Flexible session management in a distributed environment

Energy Technology Data Exchange (ETDEWEB)

Miller, Zach; Bradley, Dan; Tannenbaum, Todd [University of Wisconsin, Madison, WI (United States); Sfiligoi, Igor, E-mail: zmiller@cs.wisc.ed [Fermi National Acceleartor Laboratory, Batavia, IL (United States)

2010-04-01

Many secure communication libraries used by distributed systems, such as SSL, TLS, and Kerberos, fail to make a clear distinction between the authentication, session, and communication layers. In this paper we introduce CEDAR, the secure communication library used by the Condor High Throughput Computing software, and present the advantages to a distributed computing system resulting from CEDAR's separation of these layers. Regardless of the authentication method used, CEDAR establishes a secure session key, which has the flexibility to be used for multiple capabilities. We demonstrate how a layered approach to security sessions can avoid round-trips and latency inherent in network authentication. The creation of a distinct session management layer allows for optimizations to improve scalability by way of delegating sessions to other components in the system. This session delegation creates a chain of trust that reduces the overhead of establishing secure connections and enables centralized enforcement of system-wide security policies. Additionally, secure channels based upon UDP datagrams are often overlooked by existing libraries; we show how CEDAR's structure accommodates this as well. As an example of the utility of this work, we show how the use of delegated security sessions and other techniques inherent in CEDAR's architecture enables US CMS to meet their scalability requirements in deploying Condor over large-scale, wide-area grid systems.

Flexible session management in a distributed environment

Science.gov (United States)

Miller, Zach; Bradley, Dan; Tannenbaum, Todd; Sfiligoi, Igor

2010-04-01

Many secure communication libraries used by distributed systems, such as SSL, TLS, and Kerberos, fail to make a clear distinction between the authentication, session, and communication layers. In this paper we introduce CEDAR, the secure communication library used by the Condor High Throughput Computing software, and present the advantages to a distributed computing system resulting from CEDAR's separation of these layers. Regardless of the authentication method used, CEDAR establishes a secure session key, which has the flexibility to be used for multiple capabilities. We demonstrate how a layered approach to security sessions can avoid round-trips and latency inherent in network authentication. The creation of a distinct session management layer allows for optimizations to improve scalability by way of delegating sessions to other components in the system. This session delegation creates a chain of trust that reduces the overhead of establishing secure connections and enables centralized enforcement of system-wide security policies. Additionally, secure channels based upon UDP datagrams are often overlooked by existing libraries; we show how CEDAR's structure accommodates this as well. As an example of the utility of this work, we show how the use of delegated security sessions and other techniques inherent in CEDAR's architecture enables US CMS to meet their scalability requirements in deploying Condor over large-scale, wide-area grid systems.

9 CFR 355.35 - Label information to be displayed on principal panel.

Science.gov (United States)

2010-01-01

... AND VOLUNTARY INSPECTION AND CERTIFICATION CERTIFIED PRODUCTS FOR DOGS, CATS, AND OTHER CARNIVORA... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Label information to be displayed on principal panel. 355.35 Section 355.35 Animals and Animal Products FOOD SAFETY AND INSPECTION SERVICE...

The Accuracy of Inference in Small Samples of Dynamic Panel Data Models

NARCIS (Netherlands)

Bun, M.J.G.; Kiviet, J.F.

2001-01-01

Through Monte Carlo experiments the small sample behavior is examined of various inference techniques for dynamic panel data models when both the time-series and cross-section dimensions of the data set are small. The LSDV technique and corrected versions of it are compared with IV and GMM

Data quality in probability-based online panels: Nonresponse, attrition, and panel conditioning

NARCIS (Netherlands)

Struminskaya, B.; Methodology and statistics for the behavioural and social sciences

2014-01-01

Online panels – surveys administered over the Internet in which persons are asked to complete surveys regularly – offer cost reductions compared to surveys that use more traditional modes of data collection (face-to-face, telephone, and mail). However, some characteristics of online panels may cause

Light redirecting system using sine-wave based panels for dense urban areas

Science.gov (United States)

Mohamed, Mohamed W. N.; Mashaly, Islam A.; Mohamed, Osama N.; El-Henawy, Sally I.; Galal, Ola; Taha, Iman; Nassar, Khaled; Safwat, Amr M. E.

2014-09-01

Cities and towns around the world are becoming more condensed due to the shrinking amount of buildable areas, which significantly reduces the amount of light that occupants have access to. This lack of natural lighting results in health, safety and quality of life degradation. This paper presents a new technique of transmitting sunlight downward into narrow alleys and streets, by using a daylighting guiding acrylic panel that is capable of changing the direction and distribution of the incident light. The core of the proposed daylight guidance system is made up of light transmission panels with high quality. The corrugations have sine wave shaped cross-section so that the panel functions as an optical diffuser perpendicular to the direction of sunlight propagation. The day lighting system consists of the corrugated panels and a lattice frame, which supports the panel. The proposed system is to be mounted on the building roof facing the sun so as to redirect the incident sunlight downward into the narrow alleys or streets. Since building sizes and orientations are different the frame is arranged such that substantially deep light penetration and high luminance level can be achieved. Simulation results show that the proposed panel improves the illuminance values by more than 200% and 400% in autumn and winter, respectively, provides fan-out angle that exceeds 80° for certain solar altitudes and the transmitted power percentage varies from 40% to 90% as the solar altitude varies from 10° to 80°. Experimental results are in a good agreement with the simulations.

Session summaries

International Nuclear Information System (INIS)

Sudo, Y.

2002-01-01

In the summary session, possible international activities in the field of basic studies on high-temperature engineering were discussed within the framework of the OECD/NEA Nuclear Science Committee (NSC). It was recommended to include topics relevant to fission-product behaviour and safety issues of HTGR in next meeting, in addition to the topics discussed in this meeting. The chairperson of the last session summarised the recommendations to be presented to the NSC into the following five topics as possible international activities: - Basic studies on behaviour of irradiated graphite/carbon and ceramic materials including their composites under both operation and storage conditions. - Development of in-core material characterisation and instrumentation methods. - Improvement in material properties through high-temperature irradiation. - Basic studies on HTGR fuel fabrication and performance including fission-product release. - Basic studies on safety issues of HTGR. It was also recommended that a further information exchange meeting focused on the organisation of the interactive collaboration activity with regard to the above topics be planned in 2003, tentatively in Oarai, Japan. (author)

Panel discussion: Building Canadian companies and capabilities in the transition to the hydrogen economy

International Nuclear Information System (INIS)

Beck, N.

2004-01-01

'Full text:' Moderated by Nick Beck from Natural Resources Canada, this panel discussion will be prefaced by a keynote address by Dr. Arthur Carty, Canada's National Science Advisor and former President of the National Research Council of Canada, who will discuss technology commercialization in Canada and how the Government of Canada and industry collaborate to achieve their respective priorities. This session will illustrate innovative government and industry partnerships from early research and development to project demonstration, and adoption into the market-place. Panelists from across the Canadian hydrogen and fuel cell innovation spectrum will provide an overview of their respective company's partnerships with the Government of Canada and speak to how these alliances have helped their company to pioneer new technology, move technology from the lab to the marketplace, and/or become more competitive. Opportunities and challenges that companies have faced in their partnerships with government will be shared with the audience. The Panel Members are: Mr. Stephen Kukucha, Mr. Chris Reid, Mr. Robb Thompson, Mr. Pierre Rivard, Mr. John Shen, Mr. R. Randall MacEwen, Mr. Jonathan Wilkinson. Companies will also be showcasing their contribution in advancing Canada's and the world's transition to the hydrogen economy. (author)

Solar panel truss mounting systems and methods

Energy Technology Data Exchange (ETDEWEB)

Al-Haddad, Tristan Farris; Cavieres, Andres; Gentry, Russell; Goodman, Joseph; Nolan, Wade; Pitelka, Taylor; Rahimzadeh, Keyan; Brooks, Bradley; Lohr, Joshua; Crooks, Ryan; Porges, Jamie; Rubin, Daniel

2016-06-28

An exemplary embodiment of the present invention provides a solar panel truss mounting system comprising a base and a truss assembly coupled to the base. The truss assembly comprises a first panel rail mount, second panel rail mount parallel to the first panel rail mount, base rail mount parallel to the first and second panel rail mounts, and a plurality of support members. A first portion of the plurality of support members extends between the first and second panel rail mounts. A second portion of the plurality of support members extends between the first panel rail mount and the base rail mount. A third portion of the plurality of support members extends between the second panel rail mount and the base rail mount. The system can further comprise a plurality of connectors for coupling a plurality of photovoltaic solar panels to the truss assembly.

Solar panel truss mounting systems and methods

Energy Technology Data Exchange (ETDEWEB)

Al-Haddad, Tristan Farris; Cavieres, Andres; Gentry, Russell; Goodman, Joseph; Nolan, Wade; Pitelka, Taylor; Rahimzadeh, Keyan; Brooks, Bradley; Lohr, Joshua; Crooks, Ryan; Porges, Jamie; Rubin, Daniel

2018-01-30

An exemplary embodiment of the present invention provides a solar panel truss mounting system comprising a base and a truss assembly coupled to the base. The truss assembly comprises a first panel rail mount, second panel rail mount parallel to the first panel rail mount, base rail mount parallel to the first and second panel rail mounts, and a plurality of support members. A first portion of the plurality of support members extends between the first and second panel rail mounts. A second portion of the plurality of support members extends between the first panel rail mount and the base rail mount. A third portion of the plurality of support members extends between the second panel rail mount and the base rail mount. The system can further comprise a plurality of connectors for coupling a plurality of photovoltaic solar panels to the truss assembly.

Solar panel truss mounting systems and methods

Science.gov (United States)

Al-Haddad, Tristan Farris; Cavieres, Andres; Gentry, Russell; Goodman, Joseph; Nolan, Wade; Pitelka, Taylor; Rahimzadeh, Keyan; Brooks, Bradley; Lohr, Joshua; Crooks, Ryan; Porges, Jamie; Rubin, Daniel

2015-10-20

An exemplary embodiment of the present invention provides a solar panel truss mounting system comprising a base and a truss assembly coupled to the base. The truss assembly comprises a first panel rail mount, second panel rail mount parallel to the first panel rail mount, base rail mount parallel to the first and second panel rail mounts, and a plurality of support members. A first portion of the plurality of support members extends between the first and second panel rail mounts. A second portion of the plurality of support members extends between the first panel rail mount and the base rail mount. A third portion of the plurality of support members extends between the second panel rail mount and the base rail mount. The system can further comprise a plurality of connectors for coupling a plurality of photovoltaic solar panels to the truss assembly.

Graphite/epoxy orthogrid panel fabrication

Science.gov (United States)

Lager, J. R.

1978-01-01

The structural concept considered for a spacecraft body structure is a grid stiffened skin with a skin laminate configuration and the stiffener grid geometry selected to best suit the design requirements. The orthogrid panel developed weighs 0.55 lb/sq ft and resisted an ultimate in-plane shear load of 545 lbf/in. The basic concept of a grid stiffener composite panel is that a relatively thin skin is reinforced with a gridwork of stiffeners so that the overall panel can resist design loads without becoming structurally unstable or being overstressed. The main feature of the orthogrid panel design is that it provides the potential for low cost structural panels when advanced to the production phase. The most innovative part of the fabrication method is the foam/fiberglass stiffener web grid billet fabrication and machining to size.

Paneling architectural freeform surfaces

KAUST Repository

Eigensatz, Michael; Kilian, Martin; Schiftner, Alexander; Mitra, Niloy J.; Pottmann, Helmut; Pauly, Mark

2010-01-01

with a selected technology at reasonable cost, while meeting the design intent and achieving the desired aesthetic quality of panel layout and surface smoothness. The production of curved panels is mostly based on molds. Since the cost of mold fabrication

Ethics case reflection sessions: Enablers and barriers.

Science.gov (United States)

Bartholdson, Cecilia; Molewijk, Bert; Lützén, Kim; Blomgren, Klas; Pergert, Pernilla

2018-03-01

In previous research on ethics case reflection (ECR) sessions about specific cases, healthcare professionals in childhood cancer care were clarifying their perspectives on the ethical issue to resolve their main concern of consolidating care. When perspectives were clarified, consequences in the team included 'increased understanding', 'group strengthening' and 'decision grounding'. Additional analysis of the data was needed on conditions that could contribute to the quality of ECR sessions. The aim of this study was to explore conditions for clarifying perspectives during ECR sessions. Data were collected from observations and interviews and the results emerged from an inductive analysis using grounded theory. Participants and research context: Six observations during ECR sessions and 10 interviews were performed with healthcare professionals working in childhood cancer care and advanced paediatric homecare. Ethical considerations: The study was approved by a regional ethical review board. Participants were informed about their voluntary involvement and that they could withdraw their participation without explaining why. Two categories emerged: organizational enablers and barriers and team-related enablers and barriers. Organizational enablers and barriers included the following sub-categories: the timing of the ECR session, the structure during the ECR session and the climate during the ECR session. Sub-categories to team-related enablers and barriers were identified as space for inter-professional perspectives, varying levels of ethical skills and space for the patient's and the family's perspectives. Space for inter-professional perspectives included the dominance of a particular perspective that can result from hierarchical positions. The medical perspective is relevant for understanding the child's situation but should not dominate the ethical reflection. Conditions for ECR sessions have been explored and the new knowledge can be used when training

Solar-Panel Dust Accumulation and Cleanings

Science.gov (United States)

2005-01-01

Air-fall dust accumulates on the solar panels of NASA's Mars Exploration Rovers, reducing the amount of sunlight reaching the solar arrays. Pre-launch models predicted steady dust accumulation. However, the rovers have been blessed with occasional wind events that clear significant amounts of dust from the solar panels. This graph shows the effects of those panel-cleaning events on the amount of electricity generated by Spirit's solar panels. The horizontal scale is the number of Martian days (sols) after Spirit's Jan. 4, 2005, (Universal Time) landing on Mars. The vertical scale indicates output from the rover's solar panels as a fraction of the amount produced when the clean panels first opened. Note that the gradual declines are interrupted by occasional sharp increases, such as a dust-cleaning event on sol 420.

Multiparty session types as coherence proofs

DEFF Research Database (Denmark)

Carbone, Marco; Montesi, Fabrizio; Schürmann, Carsten

2017-01-01

We propose a Curry–Howard correspondence between a language for programming multiparty sessions and a generalisation of Classical Linear Logic (CLL). In this framework, propositions correspond to the local behaviour of a participant in a multiparty session type, proofs to processes, and proof nor...

BILATERAL SINGLE SESSION URETEROSCOPY FOR URETERAL ...

African Journals Online (AJOL)

Objectives: To determine the feasibility, safety and success rate of bilateral single session rigid retrograde ureteroscopy (URS) for bilateral ureteral calculi. Patients and Methods: Thirty-five patients underwent bilateral single session ureteroscopic calculus removal. Results: Out of 70 renal units in 35 patients treated, ...

Semi-Automated Discovery of Application Session Structure

Energy Technology Data Exchange (ETDEWEB)

Kannan, J.; Jung, J.; Paxson, V.; Koksal, C.

2006-09-07

While the problem of analyzing network traffic at the granularity of individual connections has seen considerable previous work and tool development, understanding traffic at a higher level---the structure of user-initiated sessions comprised of groups of related connections---remains much less explored. Some types of session structure, such as the coupling between an FTP control connection and the data connections it spawns, have prespecified forms, though the specifications do not guarantee how the forms appear in practice. Other types of sessions, such as a user reading email with a browser, only manifest empirically. Still other sessions might exist without us even knowing of their presence, such as a botnet zombie receiving instructions from its master and proceeding in turn to carry them out. We present algorithms rooted in the statistics of Poisson processes that can mine a large corpus of network connection logs to extract the apparent structure of application sessions embedded in the connections. Our methods are semi-automated in that we aim to present an analyst with high-quality information (expressed as regular expressions) reflecting different possible abstractions of an application's session structure. We develop and test our methods using traces from a large Internet site, finding diversity in the number of applications that manifest, their different session structures, and the presence of abnormal behavior. Our work has applications to traffic characterization and monitoring, source models for synthesizing network traffic, and anomaly detection.

Panel fabrication utilizing GaAs solar cells

Science.gov (United States)

Mardesich, N.

1984-01-01

The development of the GaAs solar cells for space applications is described. The activities in the fabrication of GaAs solar panels are outlined. Panels were fabricated while introducing improved quality control, soldering laydown and testing procedures. These panels include LIPS II, San Marco Satellite, and a low concentration panel for Rockwells' evaluation. The panels and their present status are discussed.

Attic Retrofits Using Nail-Base Insulated Panels

Energy Technology Data Exchange (ETDEWEB)

Mallay, David [Home Innovation Research Labs; Kochkin, Vladimir [Home Innovation Research Labs

2018-03-26

This project developed and demonstrated a roof/attic energy retrofit solution using nail-base insulated panels for existing homes where traditional attic insulation approaches are not effective or feasible. Nail-base insulated panels (retrofit panels) consist of rigid foam insulation laminated to one face of a wood structural panel. The prefabricated panels are installed above the existing roof deck during a reroofing effort.

Analysing sensory panel performance in a proficiency test using the PanelCheck software

DEFF Research Database (Denmark)

Tomic, O.; Luciano, G.; Nilsen, A.

2010-01-01

Check software, a workflow is proposed that guides the user through the data analysis process. This allows practitioners and non-statisticians to get an overview over panel performances in a rapid manner without the need to be familiar with details on the statistical methods. Visualisation of data analysis...... results plays an important role as this provides a time saving and efficient way of screening and investigating sensory panel performances. Most of the statistical methods used in this paper are available in the open source software PanelCheck, which may be downloaded and used for free....

Mounting clips for panel installation

Science.gov (United States)

Cavieres, Andres; Al-Haddad, Tristan; Goodman, Joseph; Valdes, Francisco

2017-02-14

An exemplary mounting clip for removably attaching panels to a supporting structure comprises a base, spring locking clips, a lateral flange, a lever flange, and a spring bonding pad. The spring locking clips extend upwardly from the base. The lateral flange extends upwardly from a first side of the base. The lateral flange comprises a slot having an opening configured to receive at least a portion of one of the one or more panels. The lever flange extends outwardly from the lateral flange. The spring bonding flange extends downwardly from the lever flange. At least a portion of the first spring bonding flange comprises a serrated edge for gouging at least a portion of the one or more panels when the one or more panels are attached to the mounting clip to electrically and mechanically couple the one or more panels to the mounting clip.

ALDS 1978 panel review. [PNL

Energy Technology Data Exchange (ETDEWEB)

Hall, D.L. (ed.)

1979-08-01

Pacific Northwest Laboratory (PNL) is examining the analysis of large data sets (ALDS). After one year's work, a panel was convened to evaluate the project. This document is the permanent record of that panel review. It consists of edited transcripts of presentations made to the panel by the PNL staff, a summary of the responses of the panel to these presentations, and PNL's plans for the development of the ALDS project. The representations of the PNL staff described various aspects of the project and/or the philosophy surrounding the project. Supporting materials appear in appendixes. 20 figures, 4 tables. (RWR)

Behaviour of partially composite precast concrete sandwich panels under flexural and axial loads

Science.gov (United States)

Tomlinson, Douglas George

Precast concrete sandwich panels are commonly used on building exteriors. They are typically composed of two concrete wythes that surround rigid insulation. They are advantageous as they provide both structural and thermal resistance. The structural response of sandwich panels is heavily influenced by shear connectors that link the wythes together. This thesis presents a study on partially composite non-prestressed precast concrete wall panels. Nine flexure tests were conducted on a wall design incorporating 'floating' concrete studs and Glass Fibre Reinforced Polymer (GFRP) connectors. The studs encapsulate and stiffen the connectors, reducing shear deformations. Ultimate loads increased from 58 to 80% that of a composite section as the connectors' reinforcement ratio increased from 2.6 to 9.8%. This design was optimized by reinforcing the studs and integrating them with the structural wythe; new connectors composed of angled steel or Basalt-FRP (BFRP) were used. The load-slip response of the new connector design was studied through 38 double shear push-through tests using various connector diameters and insertion angles. Larger connectors were stronger but more likely to pull out. Seven flexure tests were conducted on the new wall design reinforced with different combinations of steel and BFRP connectors and reinforcement. Composite action varied from 50 to 90% depending on connector and reinforcement material. Following this study, the axial-bending interaction curves were established for the new wall design using both BFRP and steel connectors and reinforcement. Eight panels were axially loaded to predesignated loads then loaded in flexure to failure. A technique is presented to experimentally determine the effective centroid of partially composite sections. Beyond the tension and compression-controlled failure regions of the interaction curve, a third region was observed in between, governed by connector failure. Theoretical models were developed for the bond

Advanced solar panel designs

Science.gov (United States)

Ralph, E. L.; Linder, E.

1995-01-01

This paper describes solar cell panel designs that utilize new hgih efficiency solar cells along with lightweight rigid panel technology. The resulting designs push the W/kg and W/sq m parameters to new high levels. These new designs are well suited to meet the demand for higher performance small satellites. This paper reports on progress made on two SBIR Phase 1 contracts. One panel design involved the use of large area (5.5 cm x 6.5 cm) GaAs/Ge solar cells of 19% efficiency combined with a lightweight rigid graphite fiber epoxy isogrid substrate configuration. A coupon (38 cm x 38 cm) was fabricated and tested which demonstrated an array specific power level of 60 W/kg with a potential of reaching 80 W/kg. The second panel design involved the use of newly developed high efficiency (22%) dual junction GaInP2/GaAs/Ge solar cells combined with an advanced lightweight rigid substrate using aluminum honeycomb core with high strength graphite fiber mesh facesheets. A coupon (38 cm x 38 cm) was fabricated and tested which demonstrated an array specific power of 105 W/kg and 230 W/sq m. This paper will address the construction details of the panels and an a analysis of the component weights. A strawman array design suitable for a typical small-sat mission is described for each of the two panel design technologies being studied. Benefits in respect to weight reduction, area reduction, and system cost reduction are analyzed and compared to conventional arrays.

Human Reliability Analysis: session summary

International Nuclear Information System (INIS)

Hall, R.E.

1985-01-01

The use of Human Reliability Analysis (HRA) to identify and resolve human factors issues has significantly increased over the past two years. Today, utilities, research institutions, consulting firms, and the regulatory agency have found a common application of HRA tools and Probabilistic Risk Assessment (PRA). The ''1985 IEEE Third Conference on Human Factors and Power Plants'' devoted three sessions to the discussion of these applications and a review of the insights so gained. This paper summarizes the three sessions and presents those common conclusions that were discussed during the meeting. The paper concludes that session participants supported the use of an adequately documented ''living PRA'' to address human factors issues in design and procedural changes, regulatory compliance, and training and that the techniques can produce cost effective qualitative results that are complementary to more classical human factors methods

Undergraduate Researchers and the Poster Session

Science.gov (United States)

Johnson, Gail; Green, Raymond

2007-01-01

Undergraduates presented original research in classroom poster sessions open to students, faculty, and friends. We assessed the reaction of the students to the experience and their reported change in their interest in presenting at conferences. Students enjoyed the poster session experience and indicated they preferred this method over other…

Ann Arbor Session I: Breaking Ground.

Science.gov (United States)

Music Educators Journal, 1979

1979-01-01

Summarizes the first session of the National Symposium on the Applications of Psychology to the Teaching and Learning of Music held at Ann Arbor from October 30 to November 2, 1978. Sessions concerned auditory perception, motor learning, child development, memory and information processing, and affect and motivation. (SJL)

Broadband transmission noise reduction of smart panels featuring piezoelectric shunt circuits and sound-absorbing material.

Science.gov (United States)

Kim, Jaehwan; Lee, Joong-Kuen

2002-09-01

The possibility of a broadband noise reduction of piezoelectric smart panels is experimentally studied. A piezoelectric smart panel is basically a plate structure on which piezoelectric patches with electrical shunt circuits are mounted and sound-absorbing material is bonded on the surface of the structure. Sound-absorbing material can absorb the sound transmitted at the midfrequency region effectively while the use of piezoelectric shunt damping can reduce the transmission at resonance frequencies of the panel structure. To be able to reduce the sound transmission at low panel resonance frequencies, piezoelectric damping using the measured electrical impedance model is adopted. A resonant shunt circuit for piezoelectric shunt damping is composed of resistor and inductor in series, and they are determined by maximizing the dissipated energy through the circuit. The transmitted noise-reduction performance of smart panels is tested in an acoustic tunnel. The tunnel is a square cross-sectional tube and a loudspeaker is mounted at one side of the tube as a sound source. Panels are mounted in the middle of the tunnel and the transmitted sound pressure across panels is measured. When an absorbing material is bonded on a single plate, a remarkable transmitted noise reduction in the midfrequency region is observed except for the fundamental resonance frequency of the plate. By enabling the piezoelectric shunt damping, noise reduction is achieved at the resonance frequency as well. Piezoelectric smart panels incorporating passive absorbing material and piezoelectric shunt damping is a promising technology for noise reduction over a broadband of frequencies.

SUCCESS RATE OF ONE SESSION AND TWO SESSION TECHNIQUES FOR TREATMENT OF ASYMPTOMATIC PULPITIS OF PRIMARY TEETH WITH INDIRECT PULP CAPPING.

Directory of Open Access Journals (Sweden)

Rossitza Kabaktchieva

2013-01-01

Full Text Available Objective: Objective: To compare the success rate between the one session and two session indirect pulp capping of asymptomatic pulpitis for 1 year after the treatment was performed in children with different caries risk. Material and Methods: The children and the teeth were selected according to certain criteria for inclusion in the study. According to that, 72 children with low, moderate and high caries risk were included and 131 teeth with asymptomatic pulpitis were treated. The clinical protocols for indirect pulp capping (IPC in one session and two sessions were defined. The review appointments were performed 6 and 12 months after the treatment using certain clinical and radiographic criteria which defined success or post-treatment complications. The results are statistically analysed using One Sided Exact Two-Proportion Test with 95% Significance level (5% risk of type I error. Results: The statistical test showed that between the compared success rates of the one session and two sessions IPC, on the 6th and 12th month, there wasn’t a significant difference (p>0.05. This was valid for every one of the examined groups of patients (p>0. 05. This proves that there is no difference in the success rates of treatment of pulpitis in primary teeth using one or two sessions. Conclusions: The results about the success of treatment of asymptomatic pulpitis in primary teeth during one or two sessions have confirmed the results showed in other current studies. Our study has confirmed (clinically and radiographically the success of both techniques and we have concluded that in children with high caries risk, more appropriate technique is the one performed in two sessions. Treatment in one session is recommended in children with low or moderate caries risk.

Panel acoustic contribution analysis.

Science.gov (United States)

Wu, Sean F; Natarajan, Logesh Kumar

2013-02-01

Formulations are derived to analyze the relative panel acoustic contributions of a vibrating structure. The essence of this analysis is to correlate the acoustic power flow from each panel to the radiated acoustic pressure at any field point. The acoustic power is obtained by integrating the normal component of the surface acoustic intensity, which is the product of the surface acoustic pressure and normal surface velocity reconstructed by using the Helmholtz equation least squares based nearfield acoustical holography, over each panel. The significance of this methodology is that it enables one to analyze and rank relative acoustic contributions of individual panels of a complex vibrating structure to acoustic radiation anywhere in the field based on a single set of the acoustic pressures measured in the near field. Moreover, this approach is valid for both interior and exterior regions. Examples of using this method to analyze and rank the relative acoustic contributions of a scaled vehicle cabin are demonstrated.

Advanced Solar Panel Designs

Science.gov (United States)

Ralph, E. L.; Linder, E. B.

1995-01-01

Solar panel designs that utilize new high-efficiency solar cells and lightweight rigid panel technologies are described. The resulting designs increase the specific power (W/kg) achievable in the near-term and are well suited to meet the demands of higher performance small satellites (smallsats). Advanced solar panel designs have been developed and demonstrated on two NASA SBIR contracts at Applied Solar. The first used 19% efficient, large area (5.5 cm x 6.5 cm) GaAs/Ge solar cells with a lightweight rigid graphite epoxy isogrid substrate configuration. A 1,445 sq cm coupon was fabricated and tested to demonstrate 60 W/kg with a high potential of achieving 80 W/kg. The second panel design used new 22% efficiency, dual-junction GaInP2/GaAs/Ge solar cells combined with a lightweight aluminum core/graphite fiber mesh facesheet substrate. A 1,445 sq cm coupon was fabricated and tested to demonstrate 105 W/kg with the potential of achieving 115 W/kg.

Summary of southeastern group breakout sessions

Science.gov (United States)

Bob Ford; Charles P. Nicholson

1993-01-01

The breakout sessions held by the southeastern representatives at the Partners In Flight meeting in Colorado were extremely well attended Most states were represented, as well as several federal agencies (including USFS, USFWS, TVA, EPA), and non-government organizations. Two sessions were held, one to discuss a strategy of management by...

Inclusion of Population-specific Reference Panel from India to the 1000 Genomes Phase 3 Panel Improves Imputation Accuracy.

Science.gov (United States)

Ahmad, Meraj; Sinha, Anubhav; Ghosh, Sreya; Kumar, Vikrant; Davila, Sonia; Yajnik, Chittaranjan S; Chandak, Giriraj R

2017-07-27

Imputation is a computational method based on the principle of haplotype sharing allowing enrichment of genome-wide association study datasets. It depends on the haplotype structure of the population and density of the genotype data. The 1000 Genomes Project led to the generation of imputation reference panels which have been used globally. However, recent studies have shown that population-specific panels provide better enrichment of genome-wide variants. We compared the imputation accuracy using 1000 Genomes phase 3 reference panel and a panel generated from genome-wide data on 407 individuals from Western India (WIP). The concordance of imputed variants was cross-checked with next-generation re-sequencing data on a subset of genomic regions. Further, using the genome-wide data from 1880 individuals, we demonstrate that WIP works better than the 1000 Genomes phase 3 panel and when merged with it, significantly improves the imputation accuracy throughout the minor allele frequency range. We also show that imputation using only South Asian component of the 1000 Genomes phase 3 panel works as good as the merged panel, making it computationally less intensive job. Thus, our study stresses that imputation accuracy using 1000 Genomes phase 3 panel can be further improved by including population-specific reference panels from South Asia.

Honeycomb metal panel

International Nuclear Information System (INIS)

1979-01-01

Product constituted by a honeycomb metal panel that can be employed to advantage for manufacturing lagging by sandwiching it between two plane sheets, utilized in particular in the nuclear industry where lagging has to have a very long life strength. The honeycomb metal panel is made of an expanded metal extrusion previously cut so as to form, after additional drawing, a honeycomb structure with square or rectangular cells with a plane surface [fr

Exascale Workshop Panel Report Meeting

Energy Technology Data Exchange (ETDEWEB)

Khaleel, Mohammad A.

2010-07-01

The Exascale Review Panel consists of 12 scientists and engineers with experience in various aspects of high-performance computing and its application, development, and management. The Panel hear presentations by several representatives of the workshops and town meetings convened over the past few years to examine the need for exascale computation capability and the justification for a U.S. Department of Energy (DOE) program to develop such capability. This report summarizes information provided by the presenters and substantial written reports to the Panel in advance of the meeting in Washington D.C. on January 19-20, 2010. The report also summarizes the Panel's conclusions with regard to the justification of a DOE-led exascale initiative.

Topical Session on Materials Management

International Nuclear Information System (INIS)

2002-01-01

At its second meeting, in Paris, 5-7 December 2001, the WPDD held two topical sessions on the D and D Safety Case and on the Management of Materials from D and D, respectively. This report documents the topical session on the management of materials. Presentations during the topical session covered key aspects of the management of materials and meant to provide an exchange of information and experience, including: Experience and lessons learnt from VLLW and non-radioactive material management in Spain and Germany with special attention to recycling (How specific solutions came about? Are there 'generic' examples for wider adoption?); Risk assessment of recycling and non-recycling: a CPD study; Waste acceptance issues within different national contexts (What constraints are there on the waste receiving body and what flexibility can the latter have? What constraints does this impose on D and D implementers? What about wastes are without current solution? What needs to be done? What about large items and 'difficult' waste in general?); Radiological characterisation of materials during decommissioning, particularly difficult situations - large volumes, large items,.. wastes, heterogeneous streams (What examples of established practice? What are the approaches or aspects that set the regulatory requirements? How can the flow rates be large but the answers acceptable? How much is needed to be known for later action, e. g., disposal, release, protection of worker, etc.); Radiological characterisation of buildings as they stand, in order to allow conventional demolition (What are strategies for optimisation of characterisation? How much needs to be known to take action later? e.g. for storage, disposal, release, cost estimation and ALARA? What needs to be done in advance and after decommissioning/dismantling?). At the end of each presentation time was allotted for discussion of the paper. Integral to the Topical Session was a facilitated plenary discussion on the topical

TU-A-BRB-00: PANEL DISCUSSION: SBRT/SRS Case Studies - Brain and Spine

Energy Technology Data Exchange (ETDEWEB)

NONE

2016-06-15

Brain stereotactic radiosurgery (SRS) and spine stereotactic body radiation therapy (SBRT) are commonly treated by a multidisciplinary team of neurosurgeons, radiation oncologists, and medical physicists. However the treatment objectives, constraints, and technical considerations involved can be quite different between the two techniques. In this interactive session an expert panel of speakers will present clinical brain SRS and spine SBRT cases in order to demonstrate real-world considerations for ensuring safe and accurate treatment delivery and to highlight the significant differences in approach for each treatment site. The session will include discussion of topic such as clinical indications, immobilization, target definition, normal tissue tolerance limits, and beam arrangements. Learning Objectives: Understand the differences in indications and dose/fractionation strategies for intracranial SRS and spine SBRT. Describe the different treatment modalities which can be used to deliver intracranial SRS and spine SBRT. Cite the major differences in treatment setup and delivery principles between intracranial and spine treatments. Identify key critical structures and clinical dosimetric tolerance levels for spine SBRT and intracranial SRS. Understand areas of ongoing work to standardize intracranial SRS and spine SBRT procedures. Schlesinger: Research support: Elekta Instruments, AB; D. Schlesinger, Elekta Instruments, AB - research support; B. Winey, No relevant external funding for this subject.

TU-A-BRB-00: PANEL DISCUSSION: SBRT/SRS Case Studies - Brain and Spine

International Nuclear Information System (INIS)

2016-01-01

Brain stereotactic radiosurgery (SRS) and spine stereotactic body radiation therapy (SBRT) are commonly treated by a multidisciplinary team of neurosurgeons, radiation oncologists, and medical physicists. However the treatment objectives, constraints, and technical considerations involved can be quite different between the two techniques. In this interactive session an expert panel of speakers will present clinical brain SRS and spine SBRT cases in order to demonstrate real-world considerations for ensuring safe and accurate treatment delivery and to highlight the significant differences in approach for each treatment site. The session will include discussion of topic such as clinical indications, immobilization, target definition, normal tissue tolerance limits, and beam arrangements. Learning Objectives: Understand the differences in indications and dose/fractionation strategies for intracranial SRS and spine SBRT. Describe the different treatment modalities which can be used to deliver intracranial SRS and spine SBRT. Cite the major differences in treatment setup and delivery principles between intracranial and spine treatments. Identify key critical structures and clinical dosimetric tolerance levels for spine SBRT and intracranial SRS. Understand areas of ongoing work to standardize intracranial SRS and spine SBRT procedures. Schlesinger: Research support: Elekta Instruments, AB; D. Schlesinger, Elekta Instruments, AB - research support; B. Winey, No relevant external funding for this subject.

Session 8: biofuels; Session 8: Les biocarburants

Energy Technology Data Exchange (ETDEWEB)

Botte, J.M.

2006-01-15

Here are given the summaries of the speeches of Mr Daniel Le Breton (Total): the transports of the future: the role of biofuels; of Mr Pierre Rouveirolles (Renault): the future expectations and needs; of Mr Frederic Monot (IFP): the developments of new generations of biofuels from biomass; of Mr Willem Jan Laan (Unilever): the use of bio resources for food and fuel: a fair competition? All these speeches have been presented at the AFTP yearly days (12-13 october 2005) on the session 8 concerning the biofuels. (O.M.)

Operation of the joint panel on occupational and environmental research for uranium production in Canada

International Nuclear Information System (INIS)

Stocker, H.; Duport, P.J.; Brown, L.D.

1993-07-01

The Joint Panel, formed in 1976, is a Canadian organization (composed of federal and provincial government departments and agencies, uranium mining companies, labour unions, and non-profit research institutions) whose members have voluntarily agreed to share information regarding planned, ongoing and completed research on the effects of uranium (and thorium) production on the radiological health and safety of workers and on the environment. The objectives of the Joint Panel are: the identification of areas (within its purview of interest) where research is required; the stimulation of research in areas where the needs have been identified; the dissemination of subsequent research results; and, the avoidance of unnecessary duplication in research activities. The operation of this unique organization permits a free and open discussion of a wide variety of research activities, draws upon its member institutions to form working groups for the preparation of technical documents, and complements its more formal business sessions with technical presentations on topics of current interest. Copies of reports of completed research are maintained by a secretariat, which also issues the minutes of all meetings as well as the annual reports

Asynchronous Session Types – Exceptions and Multiparty Interactions

DEFF Research Database (Denmark)

Carbone, Marco; Yoshida, Nobuko; Honda, Kohei

2009-01-01

Session types are a formalism for structuring communication based on the notion of session: the structure of a conversation is abstracted as a type which is then used as a basis of validating programs through an associated type discipline. While standard session types have proven to be able to ca...

Grounds of two positions photovoltaic panels

OpenAIRE

Castán Fortuño, Fernando

2008-01-01

The objective of this Master Thesis is to find the optimum positioning for a two positions photovoltaic panel. Hence, it will be implemented a model in order to optimize the energy of the sun that the photovoltaic panel is receiving by its positioning. Likewise this project will include the comparison with other photovoltaic panel systems as the single position photovoltaics panels. Ultimately, it is also going to be designed a system array for the optimized model of two positions photovoltai...

Orbiter radiator panel solar focusing test

Science.gov (United States)

Howell, H. R.; Rankin, J. G.

1983-01-01

Test data are presented which define the area around the Orbiter radiator panels for which the solar reflections are concentrated to one-sun or more. The concave shape of the panels and their specular silver/Teflon coating causes focusing of the reflected solar energy which could have adverse heating effects on equipment or astronaut extravehicular activity (EVA) in the vicinity of the radiator panels. A room ambient test method was utilized with a one-tenth scale model of the radiator panels.

Research on design of dialogue session concerning nuclear technology

International Nuclear Information System (INIS)

Karikawa, Daisuke; Takahashi, Makoto; Yagi, Ekou; Toba, Tae; Kitamura, Masaharu

2010-01-01

Toward resolving nuclear conflict, deep dialogue sessions among stakeholders having different opinions concerning nuclear technology are strongly required. In order to realize a fair and constructive dialogue session, it is necessary to pay attention to the design of the dialogue session, e.g., participant selection, agenda setting, facilitation, and rules of dialogue. The basic requirements for a dialogue session have been proposed in this study based on theoretical and empirical analyses of previous dialogue sessions on nuclear issues. The theoretical analysis has been performed based on various aspects concerning defects in nuclear communication mentioned in science and technology studies. The empirical analysis has been performed by analyzing participants' responses and by systematizing practical findings of previous dialogues. The proposed requirements for a dialogue session were utilized for the design and operation of a preliminary attempt of a dialogue session named 'Open Forum for Nuclear Communication.' Through the analysis of data, such as minutes and recorded conversations collected after the session, it has been confirmed that the prespecified requirements have been satisfied. In addition, the participants' responses have shown a high acceptance for an open forum. According to these results, the basic validity and effectiveness of the proposed requirements in the design of a dialogue session have been successfully demonstrated. (author)

A research program to reduce interior noise in general aviation airplanes: Investigation of the characteristics of an acoustic panel test facility

Science.gov (United States)

Grosveld, F.; Vanaken, J.

1978-01-01

Sound pressure levels in the test facility were studied that are caused by varying: (1) microphone positions; (2) equalizer setting; and (3) panel clamping forces. Measurements were done by using a Beranek tube or this Beranek tube in combinations with an extension tube and a special test section. In all configurations tests were executed with and without a test panel installed. The influence of the speaker back panel and the back panel of the Beranek tube on the sound pressure levels inside the test tube were also investigated. It is shown that the definition of noise reduction is more useful in relation to this test facility than transmission loss.

Minutes of the first, second, and third meeting of the Panel for Continuing Review and Assessment of the ORNL Hydrofracture Technique (WMPORMOD), August 6--7, 1985; November 5-6, 1985; October 6, 1986, Oak Ridge National Laboratory, Oak Ridge, Tennessee: [Quarterly progress report, October--December 22, 1986

International Nuclear Information System (INIS)

1986-01-01

The open session began at 0945 with a brief discussion by Dr. Steven H. Stow of desirable clarifications in several areas of the text appearing in chapter 9 of the Management of Radioactive Waste at the Oak Ridge National Laboratory: A Technical Review (National Academy Press, 1985). The ORNL staff points were well taken, and generally consistent with the understandings of the panel members who had drafted the report sections. Material was then presented by ORNL staff included Review of information collected since the October 1984 briefing, Plans for Deep Monitoring Well Groundwater Sampling and Monitoring, Plans for the Knox Reconnaissance Well, Waste Sampling and Analysis, Regulatory Interfaces and the Permitting Process, and Alternatives to Hydrofracture. Each of the presentations was summarized in a handout

FEMA DFIRM Panel Scheme Polygons

Data.gov (United States)

Minnesota Department of Natural Resources — This layer contains information about the Flood Insurance Rate Map (FIRM) panel areas. The spatial entities representing FIRM panels are polygons. The polygon for...

21 CFR 516.141 - Qualified expert panels.

Science.gov (United States)

2010-04-01

... choose members for the qualified expert panel in accordance with selection criteria listed in paragraph... whether the proposed qualified expert panel meets the selection criteria prior to the panel beginning its... Committee Act, as amended, 5 U.S.C. App. (b) Criteria for the selection of a qualified expert panel. (1) A...

The relationship between breakfast, lunch and dinner eating pattern and hemodialysis sessions, quality of life, depression and appetite in hemodialysis patients.

Science.gov (United States)

Afsar, Baris; Elsurer, Rengin; Kanbay, Mehmet

2012-10-01

To evaluate the relationship between eating pattern (regular breakfast, lunch and dinner) and dialysis sessions, laboratory and sociodemographic characteristics in hemodialysis (HD) patients. In this cross-sectional study eating patterns, sociodemographic, laboratory and clinical parameters, depressive symptoms, quality of life, cognitive function and appetite status were assessed. Eighty-two HD patients on morning session and 60 patients on midday HD session schedules were included. Ten patients had only breakfast, 17 patients had only lunch, 26 patients had only dinner, 5 patients had breakfast and lunch but not dinner, 28 patients had breakfast and dinner but not lunch, 29 patients had lunch and dinner but not breakfast, and 19 patients had neither breakfast, nor lunch, nor dinner. In the whole group, only 8 patients reported that they had regularly eaten breakfast, lunch or dinner in all days of the week. Midday HD session, better appetite, and higher income were independently associated with having breakfast. Morning HD session, better appetite score, and higher income were independently associated with having lunch. Morning session versus midday session, nPNA, presence of hypertension, and the Mental Component Summary Score of SF-36 were independently associated with having dinner. The majority of HD patients eat one or two meals per day. Having breakfast (or lunch) is associated with midday dialysis session (or morning dialysis session, respectively), better appetite, and satisfactory income. Eating dinner was associated with morning dialysis session, hypertension, higher protein intake and higher SF-36 mental component summary score.

High temperature structural sandwich panels

Science.gov (United States)

Papakonstantinou, Christos G.

High strength composites are being used for making lightweight structural panels that are being employed in aerospace, naval and automotive structures. Recently, there is renewed interest in use of these panels. The major problem of most commercial available sandwich panels is the fire resistance. A recently developed inorganic matrix is investigated for use in cases where fire and high temperature resistance are necessary. The focus of this dissertation is the development of a fireproof composite structural system. Sandwich panels made with polysialate matrices have an excellent potential for use in applications where exposure to high temperatures or fire is a concern. Commercial available sandwich panels will soften and lose nearly all of their compressive strength temperatures lower than 400°C. This dissertation consists of the state of the art, the experimental investigation and the analytical modeling. The state of the art covers the performance of existing high temperature composites, sandwich panels and reinforced concrete beams strengthened with Fiber Reinforced Polymers (FRP). The experimental part consists of four major components: (i) Development of a fireproof syntactic foam with maximum specific strength, (ii) Development of a lightweight syntactic foam based on polystyrene spheres, (iii) Development of the composite system for the skins. The variables are the skin thickness, modulus of elasticity of skin and high temperature resistance, and (iv) Experimental evaluation of the flexural behavior of sandwich panels. Analytical modeling consists of a model for the flexural behavior of lightweight sandwich panels, and a model for deflection calculations of reinforced concrete beams strengthened with FRP subjected to fatigue loading. The experimental and analytical results show that sandwich panels made with polysialate matrices and ceramic spheres do not lose their load bearing capability during severe fire exposure, where temperatures reach several

Intersections and Unions of Session Types

Directory of Open Access Journals (Sweden)

Coşku Acay

2017-02-01

Full Text Available Prior work has extended the deep, logical connection between the linear sequent calculus and session-typed message-passing concurrent computation with equi-recursive types and a natural notion of subtyping. In this paper, we extend this further by intersection and union types in order to express multiple behavioral properties of processes in a single type. We prove session fidelity and absence of deadlock and illustrate the expressive power of our system with some simple examples. We observe that we can represent internal and external choice by intersection and union, respectively, which was previously suggested by Padovani for a different language of session types motivated by operational rather than logical concerns.

Multiparty Session Types as Coherence Proofs

DEFF Research Database (Denmark)

Carbone, Marco; Montesi, Fabrizio; Schürmann, Carsten

2015-01-01

We propose a Curry-Howard correspondence between a language for programming multiparty sessions and a generalisation of Classical Linear Logic (CLL). In this framework, propositions correspond to the local behaviour of a participant in a multiparty session type, proofs to processes, and proof...... normalisation to executing communications. Our key contribution is generalising duality, from CLL, to a new notion of n-ary compatibility, called coherence. Building on coherence as a principle of compositionality, we generalise the cut rule of CLL to a new rule for composing many processes communicating...... in a multiparty session. We prove the soundness of our model by showing the admissibility of our new rule, which entails deadlock-freedom via our correspondence....

Multicenter validation of cancer gene panel-based next-generation sequencing for translational research and molecular diagnostics.

Science.gov (United States)

Hirsch, B; Endris, V; Lassmann, S; Weichert, W; Pfarr, N; Schirmacher, P; Kovaleva, V; Werner, M; Bonzheim, I; Fend, F; Sperveslage, J; Kaulich, K; Zacher, A; Reifenberger, G; Köhrer, K; Stepanow, S; Lerke, S; Mayr, T; Aust, D E; Baretton, G; Weidner, S; Jung, A; Kirchner, T; Hansmann, M L; Burbat, L; von der Wall, E; Dietel, M; Hummel, M

2018-04-01

The simultaneous detection of multiple somatic mutations in the context of molecular diagnostics of cancer is frequently performed by means of amplicon-based targeted next-generation sequencing (NGS). However, only few studies are available comparing multicenter testing of different NGS platforms and gene panels. Therefore, seven partner sites of the German Cancer Consortium (DKTK) performed a multicenter interlaboratory trial for targeted NGS using the same formalin-fixed, paraffin-embedded (FFPE) specimen of molecularly pre-characterized tumors (n = 15; each n = 5 cases of Breast, Lung, and Colon carcinoma) and a colorectal cancer cell line DNA dilution series. Detailed information regarding pre-characterized mutations was not disclosed to the partners. Commercially available and custom-designed cancer gene panels were used for library preparation and subsequent sequencing on several devices of two NGS different platforms. For every case, centrally extracted DNA and FFPE tissue sections for local processing were delivered to each partner site to be sequenced with the commercial gene panel and local bioinformatics. For cancer-specific panel-based sequencing, only centrally extracted DNA was analyzed at seven sequencing sites. Subsequently, local data were compiled and bioinformatics was performed centrally. We were able to demonstrate that all pre-characterized mutations were re-identified correctly, irrespective of NGS platform or gene panel used. However, locally processed FFPE tissue sections disclosed that the DNA extraction method can affect the detection of mutations with a trend in favor of magnetic bead-based DNA extraction methods. In conclusion, targeted NGS is a very robust method for simultaneous detection of various mutations in FFPE tissue specimens if certain pre-analytical conditions are carefully considered.

Buckling Testing and Analysis of Honeycomb Sandwich Panel Arc Segments of a Full-Scale Fairing Barrel. Part 3; 8-ply Out-of-Autoclave Facesheets

Science.gov (United States)

Pineda, Evan J.; Myers, David E.; Kosareo, Daniel N.; Kellas, Sotiris

2014-01-01

Four honeycomb sandwich panels, representing 1/16th arc segments of a 10 m diameter barrel section of the heavy lift launch vehicle, were manufactured under the NASA Composites for Exploration program and the NASA Constellation Ares V program. Two configurations were chosen for the panels: 6-ply facesheets with 1.125 in. honeycomb core and 8-ply facesheets with 1.000 in. honeycomb core. Additionally, two separate carbon fiber/epoxy material systems were chosen for the facesheets: inautoclave IM7/977-3 and out-of-autoclave T40-800B/5320-1. Smaller 3- by 5-ft panels were cut from the 1/16th barrel sections. These panels were tested under compressive loading at the NASA Langley Research Center. Furthermore, linear eigenvalue and geometrically nonlinear finite element analyses were performed to predict the compressive response of the 3- by 5-ft panels. This manuscript summarizes the experimental and analytical modeling efforts pertaining to the panel composed of 8-ply, T40-800B/5320-1 facesheets (referred to as Panel C). To improve the robustness of the geometrically nonlinear finite element model, measured surface imperfections were included in the geometry of the model. Both the linear and nonlinear, two-dimensional (2-D) and three-dimensional (3-D), models yield good qualitative and quantitative predictions. Additionally, it was predicted correctly that the panel would fail in buckling prior to failing in strength.

Reliability Study in Solar Panels

OpenAIRE

Español Lifante, Albert

2012-01-01

Crystalline silicon Modules are formed by single silicon photovoltaic cells. Since each one of these cells individually contributes to the overall electric power of the panel, the failure of one of them directly affects to its benefits and performance. To Minimize these negative effects, junction boxes with few bypass diodes are usually included in Photovoltaic Solar panels. A still experimental way to built solar panels is to integrate bypass diodes in every single cell, which would in...

Introduction of a method of constructing heat preventing panels in holds in freezing carrier. Reito unpansen ni okeru sonai bonetsu panel koho no shokai

Energy Technology Data Exchange (ETDEWEB)

Kawaki, T; Fujita, H; Yamamoto, K

1994-06-25

A freezing carrier is a dedication ship to transport frozen and refrigerated cargoes such as foodstuffs loaded in holds. Ship's heat preventing devices must have the heat insulating structure formed according to complex shapes characteristic to an ocean vessel, and the most part of the work is done by skilled technicians working on the site. Therefore, discussions have been given on a heat preventing structure using a panel construction method aiming at simplifying cross sections to more efficient and uniform shapes, and hold shapes and work in them to more suitable for palletized packaging styles, and improving working environments. The results of the discussions have been applied to two ships for the first time, and the effects have been verified. This paper reports its specifications and construction. The heat preventing panel is a sandwiched composite of a surface material and a polyurethane foam, made to a panel size of about 1 m [times] 2 m. Joints are fixed by fasteners. The present ships have adopted such a form that the side walls are vertical, but the floor area and the clear height are the same as the conventional construction methods. Good heat insulation performance and workability have been verified, and results that are expected of further development have been obtained. 7 figs.

The relationship between air pollution, fossil fuel energy consumption, and water resources in the panel of selected Asia-Pacific countries.

Science.gov (United States)

Rafindadi, Abdulkadir Abdulrashid; Yusof, Zarinah; Zaman, Khalid; Kyophilavong, Phouphet; Akhmat, Ghulam

2014-10-01

The objective of the study is to examine the relationship between air pollution, fossil fuel energy consumption, water resources, and natural resource rents in the panel of selected Asia-Pacific countries, over a period of 1975-2012. The study includes number of variables in the model for robust analysis. The results of cross-sectional analysis show that there is a significant relationship between air pollution, energy consumption, and water productivity in the individual countries of Asia-Pacific. However, the results of each country vary according to the time invariant shocks. For this purpose, the study employed the panel least square technique which includes the panel least square regression, panel fixed effect regression, and panel two-stage least square regression. In general, all the panel tests indicate that there is a significant and positive relationship between air pollution, energy consumption, and water resources in the region. The fossil fuel energy consumption has a major dominating impact on the changes in the air pollution in the region.

Evaluation of a mock interview session on residency interview skills.

Science.gov (United States)

Buckley, Kelsey; Karr, Samantha; Nisly, Sarah A; Kelley, Kristi

2018-04-01

To evaluate the impact of student pharmacist participation in a mock interview session on confidence level and preparation regarding residency interview skills. The study setting was a mock interview session, held in conjunction with student programming at the American College of Clinical Pharmacy (ACCP) Annual Meeting. Prior to the mock interview session, final year student pharmacists seeking residency program placement were asked to complete a pre-session survey assessing confidence level for residency interviews. Each student pharmacist participated in up to three mock interviews. A post-session survey evaluating confidence level was then administered to consenting participants. Following the American Society for Health-System Pharmacists (ASHP) Pharmacy Resident Matching Program (RMP), a post-match electronic survey was sent to study participants to determine their perception of the influence of the mock interview session on achieving successful interactions during residency interviews. A total of 59 student pharmacists participated in the mock interview session and completed the pre-session survey. Participants completing the post-session survey (88%, n = 52) unanimously reported an enhanced confidence in interviewing skills following the session. Thirty responders reported a program match rate of 83%. Approximately 97% (n = 29) of the respondents agreed or strongly agreed that the questions asked during the mock interview session were reflective of questions asked during residency interviews. Lessons learned from this mock interview session can be applied to PGY1 residency mock interview sessions held locally, regionally, and nationally. Students participating in the ACCP Mock Interview Session recognized the importance of the interview component in obtaining a postgraduate year 1 (PGY1) pharmacy residency. Copyright © 2017 Elsevier Inc. All rights reserved.

Evaluation of Precast Panels for Airfield Pavement Repair. Phase 1: System Optimization and Test Section Construction

Science.gov (United States)

2013-06-01

provided the most eccentric loading. Configurations with multiple wheel loads on the panel at one time were converted to a composite eccentric load at...Bearing capacity (safety factor), lb/in.2 Type Considered Main gear wheels considered load, kip Eccentricity from center x, in. y, in...dimensions were typically 12 ft x 12 ft x 10 in. with three 1.5-in.-diameter dowel bars cast in the wheel paths to ensure load transfer across the joints

Sound transmission loss of composite sandwich panels

Science.gov (United States)

Zhou, Ran

Light composite sandwich panels are increasingly used in automobiles, ships and aircraft, because of the advantages they offer of high strength-to-weight ratios. However, the acoustical properties of these light and stiff structures can be less desirable than those of equivalent metal panels. These undesirable properties can lead to high interior noise levels. A number of researchers have studied the acoustical properties of honeycomb and foam sandwich panels. Not much work, however, has been carried out on foam-filled honeycomb sandwich panels. In this dissertation, governing equations for the forced vibration of asymmetric sandwich panels are developed. An analytical expression for modal densities of symmetric sandwich panels is derived from a sixth-order governing equation. A boundary element analysis model for the sound transmission loss of symmetric sandwich panels is proposed. Measurements of the modal density, total loss factor, radiation loss factor, and sound transmission loss of foam-filled honeycomb sandwich panels with different configurations and thicknesses are presented. Comparisons between the predicted sound transmission loss values obtained from wave impedance analysis, statistical energy analysis, boundary element analysis, and experimental values are presented. The wave impedance analysis model provides accurate predictions of sound transmission loss for the thin foam-filled honeycomb sandwich panels at frequencies above their first resonance frequencies. The predictions from the statistical energy analysis model are in better agreement with the experimental transmission loss values of the sandwich panels when the measured radiation loss factor values near coincidence are used instead of the theoretical values for single-layer panels. The proposed boundary element analysis model provides more accurate predictions of sound transmission loss for the thick foam-filled honeycomb sandwich panels than either the wave impedance analysis model or the

75 FR 82376 - North American Free Trade Agreement, Article 1904 NAFTA Panel Reviews; Request for Panel Review

Science.gov (United States)

2010-12-30

... Mexico and the People's Republic of China. This determination was published in the Federal Register (75... Panel Review. SUMMARY: On December 22, 2010, the Government of Mexico filed a First Request for Panel... Government of Mexico established Rules of Procedure for Article 1904 Binational Panel Reviews (``Rules...

Session 35 - Panel: Remaining US Disposition Issues for Orphan or Small Volume Low Level and Low Level Mixed Waste Streams

International Nuclear Information System (INIS)

Blauvelt, Richard; Small, Ken; Gelles, Christine; McKenney, Dale; Franz, Bill; Loveland, Kaylin; Lauer, Mike

2006-01-01

Faced with closure schedules as a driving force, significant progress has been made during the last 2 years on the disposition of DOE mixed waste streams thought previously to be problematic. Generators, the Department of Energy and commercial vendors have combined to develop unique disposition paths for former orphan streams. Recent successes and remaining issues will be discussed. The session will also provide an opportunity for Federal agencies to share lessons learned on low- level and mixed low-level waste challenges and identify opportunities for future collaboration. This panel discussion was organized by PAC member Dick Blauvelt, Navarro Research and Engineering Inc who served as co-chair along with Dave Eaton from INL. In addition, George Antonucci, Duratek Barnwell and Rich Conley, AFSC were invited members of the audience, prepared to contribute the Barnwell and DOD perspective to the issues as needed. Mr. Small provide information regarding the five year 20K M3 window of opportunity at the Nevada Test Site for DOE contractors to dispose of mixed waste that cannot be received at the Energy Solutions (Envirocare) site in Utah because of activity levels. He provided a summary of the waste acceptance criteria and the process sites must follow to be certified to ship. When the volume limit or time limit is met, the site will undergo a RCRA closure. Ms. Gelles summarized the status of the orphan issues, commercial options and the impact of the EM reorganization on her program. She also announced that there would be a follow-on meeting in 2006 to the very successful St. Louis meeting of last year. It will probably take place in Chicago in July. Details to be announced. Mr. McKenney discussed progress made at the Hanford Reservation regarding disposal of their mixed waste inventory. The news is good for the Hanford site but not good for the rest of the DOE complex since shipment for out of state of both low level and low level mixed waste will continue to be

Does the Timing of Measurement Alter Session-RPE in Boxers?

Science.gov (United States)

Uchida, Marco C; Teixeira, Luis F M; Godoi, Vladmir J; Marchetti, Paulo H; Conte, Marcelo; Coutts, Aaron J; Bacurau, Reury F P

2014-01-01

The purpose of this study was to compare the influence of measuring the overall session rating of perceived exertion (session-RPE) at 10 vs. 30 minutes following exercise. Eight boxers completed three different standardized training sessions of different intensities (easy, moderate and hard) in a matchedpairs, randomized research design. Exercise intensity was assessed during each bout by measuring heart rate, blood lactate concentration and session-RPE. To assess the effect of measurement timing on session-RPE, RPE data were collected either 10 or 30 minutes post-exercise. There was no significant effect of measurement time on session-RPE values following easy (10 minutes: session-RPE = 1.3 ± 1.0 Arbitrary Unit (AU), %Heart Rate Reserve (HRR) = 49.5 ± 11.1, and ∆Blood lactate = -2.3 ± 16.3%; 30 minutes: session-RPE = 1.7 ± 1.0 AU, %HRR = 51.3 ± 10.8, and ∆Blood lactate = 0.7 ± 25.2%), moderate (10 minutes: session-RPE = 2.7 ± 1.6 AU, %HRR = 67.2 ± 10.8, and ∆Blood lactate = 2.2 ± 19%; 30 minutes: session-RPE = 2.5 ± 0.9 AU, %HRR = 67.2 ± 5.9, and ∆Blood lactate = 24.5 ± 17.1%) and hard (10 minutes: session-RPE = 5.7 ± 1.0 AU, %HRR = 88.1 ± 6.3, and ∆Blood lactate = 146.3 ± 87.9%; 30 minutes: session-RPE = 5.8 ± 1.9 AU, %HRR> = 83.3 ± 8.0, and ∆Blood lactate = 91.6 ± 39%) sessions. In conclusion, our findings suggest that session-RPE can be used in boxing training routines across a range of intensities and accurate measurements can be determined as early as 10 minutes after exercise. Key PointsIt is difficult to quantify and monitoring the external training load in martial arts (e.g. Aikido, Kung Fu, Judo) and physical combat sports (e.g. Boxing, Muay Thai), session RPE method appears to be a reliable method to quantifying training load in those sports.For many athletes it is impractical to wait 30 minutes after training session to provide a session-RPE. The present findings show that collecting ses-sion-RPE measures at 10 min

PubliForum 'Electricity and Society'. Citizen Panel Report

International Nuclear Information System (INIS)

1998-06-01

In the Citizen Panel's Report on 'Electricity and Society' we present the first results of three intensive week-ends. In this document, 27 Swiss citizens have recorded their opinions on the future of our electricity supply system. Solutions are sought without making claims on having found the ultimate recipe. The recommendations are the result of an assessment made by a representative cross-section of the public - one could almost say 'the voice of the people'. They reflect not only the public's apprehensions and worries, but also their ideas and desires. (authors)

A comparison of pre-dropout and temporary rupture sessions in psychotherapy.

Science.gov (United States)

Gülüm, I Volkan; Soygüt, Gonca; Safran, Jeremy D

2016-11-15

Although numerous studies have investigated the relationship between the therapeutic alliance and dropout, most have focused on the relationship between alliance quality and psychotherapy outcomes. To compare sessions with therapeutic alliance ruptures and two sessions prior to treatment dropout (pre-dropout) in terms of rupture subtypes, psychotherapists' behavior, attitudes, and session content. We implemented quantitative methods to select the sessions and qualitative methods to analyze them. We analyzed 16 temporary rupture sessions from 12 therapist-patient dyads and 16 pre-dropout sessions from 8 different therapist-patient dyads. The sessions originate from clinical psychology Master's or Doctoral students under supervision in either cognitive behavioral or schema therapy. Pre-dropout sessions were considered unrepaired rupture sessions while rupture sessions were subsequently repaired. Results revealed apparent differences and similarities between the session types in positive and negative psychotherapist behaviors, content intensity, and the type and frequency of ruptures. We explored three new rupture subtypes: attributing positive developments to other sources, indirect speech, and sarcastic hostility. A striking implication is that the frequency of positive and negative psychotherapist behaviors, ruptures, and session content is more likely to decrease in the pre-dropout sessions than in the temporary rupture sessions.

BUCLASP 3: A computer program for stresses and buckling of heated composite stiffened panels and other structures, user's manual

Science.gov (United States)

Tripp, L. L.; Tamekuni, M.; Viswanathan, A. V.

1973-01-01

The use of the computer program BUCLASP3 is described. The code is intended for thermal stress and instability analyses of structures such as unidirectionally stiffened panels. There are two types of instability analyses that can be effected by PAINT; (1) thermal buckling, and (2) buckling due to a specified inplane biaxial loading. Any structure that has a constant cross section in one direction, that may be idealized as an assemblage of beam elements and laminated flat and curved plate strip-elements can be analyzed. The two parallel ends of the panel must be simply supported, whereas arbitrary elastic boundary conditions may be imposed along any one or both external longitudinal side. Any variation in the temperature rise (from ambient) through the cross section of a panel is considered in the analyses but it must be assumed that in the longitudinal direction the temperature field is constant. Load distributions for the externally applied inplane biaxial loads are similar in nature to the permissible temperature field.

Graduate Students' Poster Session Experiences: Do Levels of Academic Self-Efficacy and Individual Characteristics Play a Role?

Science.gov (United States)

Filipova, Anna A.

2016-01-01

This cross-sectional study assesses the effectiveness of poster session presentations as an alternative to traditional presentations in the public administration classroom. It also determined if graduate students' college academic self-efficacy and background characteristics impacted poster performance outcomes. Data were collected over four…

Development of Electrostatically Clean Solar Array Panels

Science.gov (United States)

Stern, Theodore G.

2000-01-01

Certain missions require Electrostatically Clean Solar Array (ECSA) panels to establish a favorable environment for the operation of sensitive scientific instruments. The objective of this program was to demonstrate the feasibility of an ECSA panel that minimizes panel surface potential below 100mV in LEO and GEO charged particle environments, prevents exposure of solar cell voltage and panel insulating surfaces to the ambient environment, and provides an equipotential, grounded structure surrounding the entire panel. An ECSA panel design was developed that uses a Front Side Aperture-Shield (FSA) that covers all inter-cell areas with a single graphite composite laminate, composite edge clips for connecting the FSA to the panel substrate, and built-in tabs that interconnect the FSA to conductive coated coverglasses using a conductive adhesive. Analysis indicated the ability of the design to meet the ECSA requirements. Qualification coupons and a 0.5m x 0.5m prototype panel were fabricated and tested for photovoltaic performance and electrical grounding before and after exposure to acoustic and thermal cycling environments. The results show the feasibility of achieving electrostatic cleanliness with a small penalty in mass, photovoltaic performance and cost, with a design is structurally robust and compatible with a wide range of current solar panel technologies.

Solar panel foundation device

Energy Technology Data Exchange (ETDEWEB)

Hawley, W.W.

1983-03-29

A transportable solar panel foundation device which has a bottom member, at least one upstanding side member, and an essentially open top. The side members are angled to permit nesting of a plurality of the foundation devices, and reinforcement pads are carried by the foundation device to support legs for one or more solar panels.

Law Panel in action.

Science.gov (United States)

Odulana, J

In September 1976 the Africa Regional Council (ARC) of IPPF created a Law Panel to 1) advise the ARC on the emphasis of laws and parenthood programs in the region, 2) investigate legal obstacles to family planning and ways of removing them, 3) institute a monitoring service on laws and court decisions affecting planned parenthood, and 4) prepare a list of lawyers and legal reformers by country. The panel has 1) recommended adoption of an IPPF Central Medical Committee and Central Law Panel statement on sterilization, adolescent fertility control, and the use of medical and auxiliary personnel in family planning services with guidelines for Africa; 2) appointed National Legal Correspondents to carry on the monitoring service mentioned above in 18 countries; and 3) discussed solutions to problems in delivering family planning services with family planning associations in Tanzania, Zambia, Mauritius, Madagascar, and Kenya. Laws governing family planning education and services, marriage, divorce, and maternity benefits in these countries are summarized. In 1978 the panel will hold 2 workshops on law and the status of women.

PVT Panels. Fully renewable and competitive

International Nuclear Information System (INIS)

Bakker, M.; Strootman, K.J.; Jong, M.J.M.

2003-10-01

A photovoltaic/thermal (PVT) panel is a combination of photovoltaic cells with a solar thermal collector, generating solar electricity and solar heat simultaneously. PVT panels generate more solar energy per unit surface area than a combination of separate PV panels and solar thermal collectors, and share the aesthetic advantage of PV. After several years of research, PVT panels have been developed into a product that is now ready for market introduction. One of the most promising system concepts, consisting of 25 m 2 of PVT panels and a ground coupled heat pump, has been simulated in TRNSYS, and has been found to be able to fully cover both the building related electricity and heat consumption, while keeping the long-term average ground temperature constant. The cost and payback time of such a system have been determined; it has been found that the payback time of this system is approximately two-thirds of the payback time of an identical system but with 21 m 2 of PV panels and 4 m 2 of solar thermal collectors. Finally, by looking at the expected growth in the PV and solar thermal collector market, the market potential for for PVT panels has been found to be very large

75 FR 30043 - Medicare Program; Meeting of the Advisory Panel on Medicare Education

Science.gov (United States)

2010-05-28

... imposed * * * by law.'' Such duties are imposed by section 1804 of the Social Security Act (the Act...; Stephen P. Fera, M.B.A., Vice President, Social Mission Programs, Independence Blue Cross; Nan-Kirsten... Education Strategies. Public Comment. Listening Session with CMS Leadership. Next Steps. Individuals or...

Renewable energy, carbon emissions, and economic growth in 24 Asian countries: evidence from panel cointegration analysis.

Science.gov (United States)

Lu, Wen-Cheng

2017-11-01

This article aims to investigate the relationship among renewable energy consumption, carbon dioxide (CO 2 ) emissions, and GDP using panel data for 24 Asian countries between 1990 and 2012. Panel cross-sectional dependence tests and unit root test, which considers cross-sectional dependence across countries, are used to ensure that the empirical results are correct. Using the panel cointegration model, the vector error correction model, and the Granger causality test, this paper finds that a long-run equilibrium exists among renewable energy consumption, carbon emission, and GDP. CO 2 emissions have a positive effect on renewable energy consumption in the Philippines, Pakistan, China, Iraq, Yemen, and Saudi Arabia. A 1% increase in GDP will increase renewable energy by 0.64%. Renewable energy is significantly determined by GDP in India, Sri Lanka, the Philippines, Thailand, Turkey, Malaysia, Jordan, United Arab Emirates, Saudi Arabia, and Mongolia. A unidirectional causality runs from GDP to CO 2 emissions, and two bidirectional causal relationships were found between CO 2 emissions and renewable energy consumption and between renewable energy consumption and GDP. The findings can assist governments in curbing pollution from air pollutants, execute energy conservation policy, and reduce unnecessary wastage of energy.

Session 2: Availability

CERN Document Server

Uythoven, J

2012-01-01

This session concentrated on the main players affecting the availability of the LHC: the Quench Protection System (QPS), the cryogenics system, the regularly foreseen technical stops and the effect of radiation on equipment failures. A forecast for operation in 2012 was made for all these items.

Panel cutting method: new approach to generate panels on a hull in Rankine source potential approximation

Directory of Open Access Journals (Sweden)

Hee-Jong Choi

2011-12-01

Full Text Available In the present study, a new hull panel generation algorithm, namely panel cutting method, was developed to predict flow phenomena around a ship using the Rankine source potential based panel method, where the iterative method was used to satisfy the nonlinear free surface condition and the trim and sinkage of the ship was taken into account. Numerical computations were performed to investigate the validity of the proposed hull panel generation algorithm for Series 60 (CB=0.60 hull and KRISO container ship (KCS, a container ship designed by Maritime and Ocean Engineering Research Institute (MOERI. The computational results were validated by comparing with the existing experimental data.

Panel cutting method: new approach to generate panels on a hull in Rankine source potential approximation

Science.gov (United States)

Choi, Hee-Jong; Chun, Ho-Hwan; Park, Il-Ryong; Kim, Jin

2011-12-01

In the present study, a new hull panel generation algorithm, namely panel cutting method, was developed to predict flow phenomena around a ship using the Rankine source potential based panel method, where the iterative method was used to satisfy the nonlinear free surface condition and the trim and sinkage of the ship was taken into account. Numerical computations were performed to investigate the validity of the proposed hull panel generation algorithm for Series 60 (CB=0.60) hull and KRISO container ship (KCS), a container ship designed by Maritime and Ocean Engineering Research Institute (MOERI). The computational results were validated by comparing with the existing experimental data.

75 FR 20567 - North American Free-Trade Agreement (NAFTA), Article 1904 Binational Panel Reviews

Science.gov (United States)

2010-04-20

... (NAFTA), Article 1904 Binational Panel Reviews AGENCY: NAFTA Secretariat, United States Section... Article 1904 of the Agreement, which came into force on January 1, 1994, the Government of the United States, the Government of Canada and the Government of Mexico established Rules of Procedure for Article...

76 FR 56156 - North American Free-Trade Agreement (NAFTA), Article 1904 Binational Panel Reviews

Science.gov (United States)

2011-09-12

... (NAFTA), Article 1904 Binational Panel Reviews AGENCY: NAFTA Secretariat, United States Section... Article 1904 of the Agreement, which came into force on January 1, 1994, the Government of the United States, the Government of Canada and the Government of Mexico established Rules of Procedure for Article...

Session 5 summarizing statements and panel discussion

International Nuclear Information System (INIS)

1977-01-01

A set of contributions proposes synthetic overviews on different topics: zircaloy oxidation under accident conditions, zircaloy deformation and rupture behaviour, fuel behaviour code development, applications of fuel research results to reactor licensing, research on accident behaviour of fuel, fuel accident behaviour research in risk perspective. The last contribution gives the main conclusions and recommendation from the meeting

Piezoelectric Shunt Vibration Damping of F-15 Panel under High Acoustic Excitation

Science.gov (United States)

Wu, Shu-Yau; Turner, Travis L.; Rizzi, Stephen A.

2000-01-01

At last year's SPIE symposium, we reported results of an experiment on structural vibration damping of an F-15 underbelly panel using piezoelectric shunting with five bonded PZT transducers. The panel vibration was induced with an acoustic speaker at an overall sound pressure level (OASPL) of about 90 dB. Amplitude reductions of 13.45 and 10.72 dB were achieved for the first and second modes, respectively, using single- and multiple-mode shunting. It is the purpose of this investigation to extend the passive piezoelectric shunt-damping technique to control structural vibration induced at higher acoustic excitation levels, and to examine the controllability and survivability of the bonded PZT transducers at these high levels. The shunting experiment was performed with the Thermal Acoustic Fatigue Apparatus (TAFA) at the NASA Langley Research Center using the same F-15 underbelly panel. The TAFA is a progressive wave tube facility. The panel was mounted in one wall of the TAFA test section using a specially designed mounting fixture such that the panel was subjected to grazing-incidence acoustic excitation. Five PZT transducers were used with two shunt circuits designed to control the first and second modes of the structure between 200 and 400 Hz. We first determined the values of the shunt inductance and resistance at an OASPL of 130 dB. These values were maintained while we gradually increased the OASPL from 130 to 154 dB in 6-dB steps. During each increment, the frequency response function between accelerometers on the panel and the acoustic excitation measured by microphones, before and after shunting, were recorded. Good response reduction was observed up to the 148dB level. The experiment was stopped at 154 dB due to wire breakage from vibration at a transducer wire joint. The PZT transducers, however, were still bonded well on the panel and survived at this high dB level. We also observed shifting of the frequency peaks toward lower frequency when the OASPL

Solar panel assembly and support pad

Energy Technology Data Exchange (ETDEWEB)

Hawley, W.W.

1980-10-07

A solar panel assembly is described comprising at least one solar panel, support means for carrying said panel, and at least one support pad having a base plate, upstanding longitudinal sides, and spaced apart flange means for connection to said support means, said upstanding sides and opposed flange means defining an interior volume for receiving and holding weighting material.

JERAMI SEBAGAI BAHAN BAKU PANEL AKUSTIK PELAPIS DINDING

Directory of Open Access Journals (Sweden)

Christina E. Mediastika

2008-01-01

Full Text Available The demand of walling panels with acoustic qualification has surprisingly increased, due to the needs for home theaters and mini recording studios in the increase of environmental noise. Therefore, good supply of acoustic panels, especially those with lower price are necessary. A series of study to explore possibility in using paddy-straw as main material to construct cheap and high quality panels has been developed. Prior to this study, an earlier small research showed there was a great potency in using paddy-straw as panels, especially ones drawn from paddy in type IR. The earlier study recommends further research to examine strength of compression and tensile of the constructed panels to go for building materials, which is presented in this paper. Acoustic qualification of the panels is subject for further reserach. Abstract in Bahasa Indonesia: Kebutuhan akan panel pelapis dinding yang bersifat akustik terus meningkat seiring meningkatnya kebisingan dan kebutuhan terhadap ruang studio pribadi. Ketersediaan panel pelapis dinding dengan harga yang lebih terjangkau seperti yang terbuat dari bahan limbah sangatlah dibutuhkan. Pada penelitian awal telah diselidiki kemungkinan penggunaan jerami yang merupakan limbah sebagai bahan baku pembuatan panel akustik. Penelitian tersebut menunjukkan bahwa jerami sangat potensial digunakan sebagai bahan aku panel, terutama jerami padi berjenis IR. Selanjutnya panel jerami ini perlu mendapatkan perlakukan uji desak dan lentur untuk memastikan kemampuannya menahan berat sendiri dan kekuatannya saat proses penggunaan, sebelum akhirnya mengalami pengujian berkaitan dengan kualitas akustik. Kekuatan desak dan lentur panel dimaksud, tersaji dalam tulisan ini. Kata kunci: panel jerami, uji desak, uji lentur.

Report of Industry Panel Group

Science.gov (United States)

Gallimore, Simon; Gier, Jochen; Heitland, Greg; Povinelli, Louis; Sharma, Om; VandeWall, Allen

2006-01-01

A final report is presented from the industry panel group. The contents include: 1) General comments; 2) Positive progress since Minnowbrook IV; 3) Industry panel outcome; 4) Prioritized turbine projects; 5) Prioritized compressor projects; and 6) Miscellaneous.

KUALITAS AKUSTIK PANEL DINDING BERBAHAN BAKU JERAMI

Directory of Open Access Journals (Sweden)

Christina E. Mediastika

2008-01-01

Full Text Available A series of study to explore possibility in using paddy-straw as main material to construct cheap and high quality panels has been developed. Prior to this study, laboratory research to examine strength of compression and tensile of the panels have been conducted, which is showed a significant value for a non-structural panel. The compression is 15 N/mm2 and tensile averaged at 0,5 N/mm2 . In this study, acoustic properties of the panels is to be examined, i.e.: transmission loss (TL, absorption coefficient (, and reverberation time (RT60. The test showed TL of 10 dB and 16 dB,  of 0,4 and 0,8 and improve RT60 from 0,88 sec to 0,35 sec and 0,16 sec (500 Hz is used for reference. Abstract in Bahasa Indonesia: Ketersediaan panel pelapis dinding yang bersifat akustik dengan harga yang lebih terjangkau seperti yang terbuat dari bahan limbah sangatlah penting. Pada penelitian awal telah diselidiki penggunaan jerami sebagai bahan baku pembuatan panel akustik, sekaligus telah dilakukan pengujian terhadap kareakteristik struktural (uji desak dan lentur dari panel tersebut. Dari uji kekuatan struktural, panel memiliki kekuatan desak mencapai 15 N/mm2 dan kuat lentur reta-rata 0,5 N/mm2. Kekuatan ini dianggap mencukupi bagi panel non-struktural yang hanya bertugas untuk memikul beban sendiri. Oleh karena tujuan awal pembuatan panel adalah untuk kepentingan akustik, maka pada penelitian lanjutan, dilakukan uji laboratorium dan lapangan untuk melihat karakterisktik akustiknya. Adapun pengujian meliputi: redaman/insulasi (TL, koefisien serap ( dan waktu dengung (RT60. Dari hasil pengujian, panel mempunyai TL 10 dB dan 16 dB,  0,4 dan 0,8, serta mampu memperbaiki RT60 ruangan dari 0,88 detik menjadi 0,35 detik dan 0,16 detik. Kesemua pengujian menggunakan band frekuensi 500 Hz sebagai acuan. Kata kunci: panel jerami, insulasi, koefisien serap, waktu dengung.

Advantages and disadvantages : longitudinal vs. repeated cross-section surveys

Science.gov (United States)

1996-06-20

The benefits of a longitudinal analysis over a repeated cross-sectional study include increased statistical power and the capability to estimate a greater range of conditional probabilities. With the Puget Sound Transportation Panel (PSTP), and any s...

The Treadmill of Destruction in Comparative Perspective: A Panel Study of Military Spending and Carbon Emissions, 1960-2014

Directory of Open Access Journals (Sweden)

John Hamilton Bradford

2017-08-01

Full Text Available This article analyzes a unique panel data set to assess the effect of militarism on per capita carbon dioxide emissions.   We extend previous research examining the effects of military expenditures on carbon emissions by including in our analyses over 30 years of additional data.  In addition, we compare our preliminary results to those obtained from other estimation procedures.  Specifically, we report and visually illustrate the results of 54 cross-sectional models (one for each year and 36 unique panel regression models on both balanced and unbalanced panels.  We assess how this relationship has changed over time by testing for interactions between military spending and time and by systematically re-analyzing our data across 180 panel regressions with varying time frames.  A strong and enduring association between military spending and per capita carbon emissions is indicated in cross-sectional comparisons.  Our panel analyses reveal a much weaker and varying relationship that has become stronger in recent decades. Moreover, we find that the effect of military spending on per capita carbon emissions is moderated by countries’ level of economic development, with military spending of more wealthy countries having relatively larger net effects on carbon emissions.  We partially confirm previous findings on the temporal stability of the environmental impacts of militarism.  Our analyses show, however, that this temporal stability has emerged relatively recently, and that the relationship between military expenditures and carbon emissions is weaker prior to the 1990s.

Transactions of the 8th International Conference on Structure Mechanics in Reactor Technology

International Nuclear Information System (INIS)

Browzin, B.S.

1985-06-01

These Transactions of the JK-panel session include preprints of papers or abstracts which are listed in Volume A, ''Introduction, General Contents, Authors Index,'' Proceedings of the 8th International Conference on Structural Mechanics in Reactor Technology. These papers represent the body of the JK-panel session, ''Status of Research in Structural and Mechanical Engineering for Nuclear Power Plants,'' sponsored by the US Nuclear Regulatory Commission. Additional papers are expected at this session, which will be available at the session. The purpose of publishing these Transactions is to inform the participants of the JK-panel session in advance on the papers to be presented and discussed at the session

Panel Smooth Transition Regression Models

DEFF Research Database (Denmark)

González, Andrés; Terasvirta, Timo; Dijk, Dick van

We introduce the panel smooth transition regression model. This new model is intended for characterizing heterogeneous panels, allowing the regression coefficients to vary both across individuals and over time. Specifically, heterogeneity is allowed for by assuming that these coefficients are bou...

Advanced Fast Reactor - 100 (AFR-100) Report for the Technical Review Panel

Energy Technology Data Exchange (ETDEWEB)

Grandy, Christopher [Argonne National Lab. (ANL), Argonne, IL (United States); Sienicki, James J. [Argonne National Lab. (ANL), Argonne, IL (United States); Moisseytsev, Anton [Argonne National Lab. (ANL), Argonne, IL (United States); Krajtl, Lubomir [Argonne National Lab. (ANL), Argonne, IL (United States); Farmer, Mitchell T. [Argonne National Lab. (ANL), Argonne, IL (United States); Kim, Taek K. [Argonne National Lab. (ANL), Argonne, IL (United States); Middleton, B. [Argonne National Lab. (ANL), Argonne, IL (United States)

2014-06-04

This report is written to provide an overview of the Advanced Fast Reactor-100 in the requested format for a DOE technical review panel. This report was prepared with information that is responsive to the DOE Request for Information, DE-SOL-0003674 Advanced Reactor Concepts, dated February 27, 2012 from DOE’s Office of Nuclear Energy, Office of Nuclear Reactor Technologies. The document consists of two main sections. The first section is a summary of the AFR-100 design including the innovations that are incorporated into the design. The second section contains a series of tables that respond to the various questions requested of the reactor design team from the subject DOE RFI.

Session 7: Reserve

International Nuclear Information System (INIS)

Bailey, R.; Crockford, G.

2001-01-01

The reserve session was devoted to some issues that came up through the workshop, which were grouped into three main areas: The Global Accelerator Network, Problems of stress and how to get organized to minimize them, What should an operations group be responsible for? This paper summarizes the discussions that took place. (author)

Hexagon solar power panel

Science.gov (United States)

Rubin, I. (Inventor)

1978-01-01

A solar energy panel support is described upon which silicon cells are arrayed. The cells are wafer thin and of two geometrical types, both of the same area and electrical rating, namely hexagon cells and hourglass cells. The hourglass cells are composites of half hexagons. A near perfect nesting relationship of the cells achieves a high density packing whereby optimum energy production per panel area is achieved.

Group versus individual sessions delivered by a physiotherapist for female urinary incontinence: an interview study with women attending group sessions nested within a randomised controlled trial

Directory of Open Access Journals (Sweden)

Smith Jan

2009-09-01

Full Text Available Abstract Background The aim was to explore the concerns and expectations of women invited to attend group physiotherapy sessions for the management of female urinary incontinence and whether the experience changed their views; and to gather recommendations from women attending group sessions on the design and delivery of these sessions Methods An interview study nested within a randomised controlled trial in five British NHS physiotherapy departments, including 22 women who had expressed a preference for an individual physiotherapy session but were randomised to, and attended, group sessions. Results Embarrassment was woven throughout women's accounts of experiencing urinary incontinence and seeking health care. Uncertainty about the nature of group sessions was a source of concern. Attending the first session was seen as a big hurdle by many women. However, a sense of relief was common once the session started, with most women describing some benefit from attendance. Recommendations for design and delivery of the sessions from women focused on reducing embarrassment and uncertainty prior to attendance. Conclusion Taking account of women's embarrassment and providing detailed information about the content of group sessions will enable women to benefit from group physiotherapy sessions for the management of female urinary incontinence. Trial Registration Trial registration number: ISRCTN 16772662

76 FR 9018 - Disease, Disability, and Injury Prevention and Control Special Emphasis Panel (SEP): Emerging...

Science.gov (United States)

2011-02-16

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Disease, Disability, and Injury Prevention and Control Special Emphasis Panel (SEP): Emerging Infections Sentinel... with Section 10(a)(2) of the Federal Advisory Committee Act (Pub. L. 92-463), the Centers for Disease...

Control panel for CMC 8080 crate controller

International Nuclear Information System (INIS)

Masayuki Inokuchi

1978-01-01

The main features of Control Panel for CAMAC Crate Controller CMC 8080 are described. The control panel can be directly connected with CRATE CONTROLLER's front panel connector with a 50 lines cable without any changes in CMC 8080 system circuits. (author)

An Erlang Implementation of Multiparty Session Actors

Directory of Open Access Journals (Sweden)

Simon Fowler

2016-08-01

Full Text Available By requiring co-ordination to take place using explicit message passing instead of relying on shared memory, actor-based programming languages have been shown to be effective tools for building reliable and fault-tolerant distributed systems. Although naturally communication-centric, communication patterns in actor-based applications remain informally specified, meaning that errors in communication are detected late, if at all. Multiparty session types are a formalism to describe, at a global level, the interactions between multiple communicating entities. This article describes the implementation of a prototype framework for monitoring Erlang/OTP gen_server applications against multiparty session types, showing how previous work on multiparty session actors can be adapted to a purely actor-based language, and how monitor violations and termination of session participants can be reported in line with the Erlang mantra of "let it fail". Finally, the framework is used to implement two case studies: an adaptation of a freely-available DNS server, and a chat server.

The effect of session order on the physiological, neuromuscular, and endocrine responses to maximal speed and weight training sessions over a 24-h period.

Science.gov (United States)

Johnston, Michael; Johnston, Julia; Cook, Christian J; Costley, Lisa; Kilgallon, Mark; Kilduff, Liam P

2017-05-01

Athletes are often required to undertake multiple training sessions on the same day with these sessions needing to be sequenced correctly to allow the athlete to maximize the responses of each session. We examined the acute effect of strength and speed training sequence on neuromuscular, endocrine, and physiological responses over 24h. 15 academy rugby union players completed this randomized crossover study. Players performed a weight training session followed 2h later by a speed training session (weights speed) and on a separate day reversed the order (speed weights). Countermovement jumps, perceived muscle soreness, and blood samples were collected immediately prior, immediately post, and 24h post-sessions one and two respectively. Jumps were analyzed for power, jump height, rate of force development, and velocity. Blood was analyzed for testosterone, cortisol, lactate and creatine kinase. There were no differences between countermovement jump variables at any of the post-training time points (p>0.05). Likewise, creatine kinase, testosterone, cortisol, and muscle soreness were unaffected by session order (p>0.05). However, 10m sprint time was significantly faster (mean±standard deviation; speed weights 1.80±0.11s versus weights speed 1.76±0.08s; p>0.05) when speed was sequenced second. Lactate levels were significantly higher immediately post-speed sessions versus weight training sessions at both time points (ptraining does not affect the neuromuscular, endocrine, and physiological recovery over 24h. However, speed may be enhanced when performed as the second session. Copyright © 2016 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

NSSS vendors session

International Nuclear Information System (INIS)

Anon.

1982-01-01

A transcription of a question and answer session at the 1982 Nuclear Commerce Conference was presented. Standardization of nuclear power plant design, and the effects it would have on Nuclear Regulatory Commission licensing and regulations, was of particular interest. Forecasts of the demand for nuclear power for the rest of this country were also discussed

PV panel model based on datasheet values

DEFF Research Database (Denmark)

Sera, Dezso; Teodorescu, Remus; Rodriguez, Pedro

2007-01-01

This work presents the construction of a model for a PV panel using the single-diode five-parameters model, based exclusively on data-sheet parameters. The model takes into account the series and parallel (shunt) resistance of the panel. The equivalent circuit and the basic equations of the PV cell....... Based on these equations, a PV panel model, which is able to predict the panel behavior in different temperature and irradiance conditions, is built and tested....

Thin film photovoltaic panel and method

Science.gov (United States)

Ackerman, Bruce; Albright, Scot P.; Jordan, John F.

1991-06-11

A thin film photovoltaic panel includes a backcap for protecting the active components of the photovoltaic cells from adverse environmental elements. A spacing between the backcap and a top electrode layer is preferably filled with a desiccant to further reduce water vapor contamination of the environment surrounding the photovoltaic cells. The contamination of the spacing between the backcap and the cells may be further reduced by passing a selected gas through the spacing subsequent to sealing the backcap to the base of the photovoltaic panels, and once purged this spacing may be filled with an inert gas. The techniques of the present invention are preferably applied to thin film photovoltaic panels each formed from a plurality of photovoltaic cells arranged on a vitreous substrate. The stability of photovoltaic conversion efficiency remains relatively high during the life of the photovoltaic panel, and the cost of manufacturing highly efficient panels with such improved stability is significantly reduced.

Aerosol Deposition and Solar Panel Performance

Science.gov (United States)

Arnott, W. P.; Rollings, A.; Taylor, S. J.; Parks, J.; Barnard, J.; Holmes, H.

2015-12-01

Passive and active solar collector farms are often located in relatively dry desert regions where cloudiness impacts are minimized. These farms may be susceptible to reduced performance due to routine or episodic aerosol deposition on collector surfaces. Intense episodes of wind blown dust deposition may negatively impact farm performance, and trigger need to clean collector surfaces. Aerosol deposition rate depends on size, morphology, and local meteorological conditions. We have developed a system for solar panel performance testing under real world conditions. Two identical 0.74 square meter solar panels are deployed, with one kept clean while the other receives various doses of aerosol deposition or other treatments. A variable load is used with automation to record solar panel maximum output power every 10 minutes. A collocated sonic anemometer measures wind at 10 Hz, allowing for both steady and turbulent characterization to establish a link between wind patterns and particle distribution on the cells. Multispectral photoacoustic instruments measure aerosol light scattering and absorption. An MFRSR quantifies incoming solar radiation. Solar panel albedo is measured along with the transmission spectra of particles collected on the panel surface. Key questions are: At what concentration does aerosol deposition become a problem for solar panel performance? What are the meteorological conditions that most strongly favor aerosol deposition, and are these predictable from current models? Is it feasible to use the outflow from an unmanned aerial vehicle hovering over solar panels to adequately clean their surface? Does aerosol deposition from episodes of nearby forest fires impact performance? The outlook of this research is to build a model that describes environmental effects on solar panel performance. Measurements from summer and fall 2015 will be presented along with insights gleaned from them.

Numerical simulation of wind loads on solar panels

Science.gov (United States)

Su, Kao-Chun; Chung, Kung-Ming; Hsu, Shu-Tsung

2018-05-01

Solar panels mounted on the roof of a building or ground are often vulnerable to strong wind loads. This study aims to investigate wind loads on solar panels using computational fluid dynamic (CFD). The results show good agreement with wind tunnel data, e.g. the streamwise distribution of mean surface pressure coefficient of a solar panel. Wind uplift for solar panels with four aspect ratios is evaluated. The effect of inclined angle and clearance (or height) of a solar panel is addressed. It is found that wind uplift of a solar panel increases when there is an increase in inclined angle and the clearance above ground shows an opposite effect.

The effects of session length on demand functions generated using FR schedules.

Science.gov (United States)

Foster, T Mary; Kinloch, Jennifer; Poling, Alan

2011-05-01

In comparing open and closed economies, researchers often arrange shorter sessions under the former condition than under the latter. Several studies indicate that session length per se can affect performance and there are some data that indicate that this variable can influence demand functions. To provide further data, the present study exposed domestic hens to series of increasing fixed-ratio schedules with the length of the open-economy sessions varied over 10, 40, 60, and 120 min. Session time affected the total-session response rates and pause lengths. The shortest session gave the greatest response rates and shortest pauses and the longest gave the lowest response rates and longest pauses. The total-session demand functions also changed with session length: The shortest session gave steeper initial slopes (i.e., the functions were more elastic at small ratios) and smaller rates of change of elasticity than the longest session. Response rates, pauses, and demand functions were, however, similar for equivalent periods of responding taken from within sessions of different overall lengths (e.g., total-session data for 10-min sessions and the data for the first 10 min of 120-min sessions). These findings suggest that differences in session length can confound the results of studies comparing open and closed economies when those economies are arranged in sessions that differ substantially in length, hence data for equivalent-length periods of responding, rather than total-session data, should be of primary interest under these conditions.

Integrally rigidized acoustic interior spacecraft panel

Science.gov (United States)

1976-01-01

A sandwich panel concept is described which utilizes a monolithic I-beam design as the core. The core and skins are integrally bonded with thermosetting resin into a homogeneous structure. In addition to possessing a high strength to weight ratio, the panel resists combustion, delamination, aging due to fatigue, localized stresses, and exhibits good acoustic properties. Since the panel concept has definite potential as a high flame retardant and low smoke emission panel with excellent structural integrity, aerospace materials were used to optimize the construction for highly demanding space shuttle applications. The specific materials of construction were chosen for low flammability and off-gassing properties as well as for strength, light weight, and sound dampening.

Matlab Software for Spatial Panels

NARCIS (Netherlands)

Elhorst, J.Paul

2014-01-01

Elhorst provides Matlab routines to estimate spatial panel data models at his website. This article extends these routines to include the bias correction procedure proposed by Lee and Yu if the spatial panel data model contains spatial and/or time-period fixed effects, the direct and indirect

Panel 3 - characterization

Energy Technology Data Exchange (ETDEWEB)

Erck, R.A.; Erdemir, A.; Janghsing Hsieh; Lee, R.H.; Xian Zheng Pan; Deming Shu [Argonne National Lab., IL (United States); Feldman, A. [National Inst. of Standards and Technology, Gaithersburg, MD (United States); Glass, J.T. [North Carolina State Univ., Raleigh (United States); Kleimer, R. [Coors Ceramics Co., Golden, CO (United States); Lawton, E.A. [JPL/Caltech, Pasadena, CA (United States); McHargue, C.J. [Univ. of Tennessee, Knoxville (United States)

1993-01-01

The task of this panel was to identify and prioritize needs in the area of characterization of diamond and diamond-like-carbon (DLC) films for use in the transportation industry. Until recent advances in production of inexpensive films of diamonds and DLC, it was not feasible that these materials could be mass produced. The Characterization Panel is restricting itself to identifying needs in areas that would be most useful to manufacturers and users in producing and utilizing diamond and DLC coatings in industry. These characterization needs include in-situ monitoring during growth, relation of structure to performance, and standards and definitions.

Development of panel loudspeaker system: design, evaluation and enhancement.

Science.gov (United States)

Bai, M R; Huang, T

2001-06-01

Panel speakers are investigated in terms of structural vibration and acoustic radiation. A panel speaker primarily consists of a panel and an inertia exciter. Contrary to conventional speakers, flexural resonance is encouraged such that the panel vibrates as randomly as possible. Simulation tools are developed to facilitate system integration of panel speakers. In particular, electro-mechanical analogy, finite element analysis, and fast Fourier transform are employed to predict panel vibration and the acoustic radiation. Design procedures are also summarized. In order to compare the panel speakers with the conventional speakers, experimental investigations were undertaken to evaluate frequency response, directional response, sensitivity, efficiency, and harmonic distortion of both speakers. The results revealed that the panel speakers suffered from a problem of sensitivity and efficiency. To alleviate the problem, a woofer using electronic compensation based on H2 model matching principle is utilized to supplement the bass response. As indicated in the result, significant improvement over the panel speaker alone was achieved by using the combined panel-woofer system.

A report on the UN special session on disarmament

International Nuclear Information System (INIS)

1978-01-01

Slow progress in disarmament led many of the United Nations Member States, particularly the non-aligned countries, to request the convening of a Special Session of the General Assembly Devoted to Disarmament. The idea of such a special session had evolved over the past few years as an alternative to a World Disarmament Conference and in contrast to the limited possibilities for discussion provided by a regular session of the General Assembly. A special session was perceived as offering the appropriate opportunity to discuss comprehensive disarmament in a practically universal forum The decision to hold the special session was taken by the General Assembly on 21 December 1976 by resolution 31/189 B, which also established a Preparatory Committee to examine all questions relevant to the special session. Fifty-four countries were appointed members of the Preparatory Committee, which met in five sessions. The United Nations Special Session on Disarmament (SSOD) was held in New York from May 23 to June 30, 1978. One hundred and forty-five nations attended and this was the first time since the Disarmament Conference of 1932 that virtually all countries of the world met to discuss all aspects of disarmament. The agenda for the SSOD included inter alia: a review and appraisal of the present international situation, the adoption of a Declaration on Disarmament, the adoption of a Programme of Action on Disarmament, a review of the role of the UN in disarmament and of the international machinery for negotiations on disarmament, including, in particular, the question of convening a world disarmament conference. The various proposals made at the sessions of the Preparatory Committee and at the SSOD itself were consolidated into one document. Consensus on this Final Document was reached on June 30, the concluding day of the session. The Final Document consists of three major parts: Declaration of Principles, Programme of Action and Disarmament Machinery

Solar Panel Installations on Existing Structures

OpenAIRE

Tim D. Sass; Pe; Leed

2013-01-01

The rising price of fossil fuels, government incentives and growing public aware-ness for the need to implement sustainable energy supplies has resulted in a large in-crease in solar panel installations across the country. For many sites the most eco-nomical solar panel installation uses existing, southerly facing rooftops. Adding solar panels to an existing roof typically means increased loads that must be borne by the building-s structural elements. The structural desig...

78 FR 56236 - Disease, Disability, and Injury Prevention and Control Special Emphasis Panel (SEP): Initial Review

Science.gov (United States)

2013-09-12

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Disease Control and Prevention Disease, Disability, and Injury Prevention and Control Special Emphasis Panel (SEP): Initial Review The meeting announced below concerns NIOSH Member Conflict Review, PA 07-318, initial review. In accordance with Section...

Uncertainties in predicting solar panel power output

Science.gov (United States)

Anspaugh, B.

1974-01-01

The problem of calculating solar panel power output at launch and during a space mission is considered. The major sources of uncertainty and error in predicting the post launch electrical performance of the panel are considered. A general discussion of error analysis is given. Examples of uncertainty calculations are included. A general method of calculating the effect on the panel of various degrading environments is presented, with references supplied for specific methods. A technique for sizing a solar panel for a required mission power profile is developed.

Report of the Federal Internetworking Requirements Panel

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-05-31

The Federal Internetworking Requirements Panel (FIRP) was established by the National Institute of Standards and Technology (NIST) to reassess Federal requirements for open systems networks and to recommend policy on the Government`s use of networking standards. The Panel was chartered to recommend actions which the Federal Government can take to address the short and long-term issues of interworking and convergence of networking protocols--particularly the Internet Protocol Suite (IPS) and Open Systems Interconnection (OSI) protocol suite and, when appropriate, proprietary protocols. The Panel was created at the request of the Office of Management and Budget in collaboration with the Federal Networking Council and the Federal Information Resources Management Policy Council. The Panel`s membership and charter are contained in an appendix to this report.

Determinants of tourist arrivals in Africa: a panel data regression analysis

OpenAIRE

Naudé, Wim; Saayman, Andrea

2005-01-01

Africa’s tourism potential is acknowledged to be significant but underdeveloped. This paper uses both cross-section data and panel data for the period 1996–2000 to identify the determinants of tourism arrivals in 43 African countries, taking into account tourists’ country of origin. The results strongly suggest that political stability, tourism infrastructure, marketing and information, and the level of development at the destination are key determinants of travel to Africa. Typical ‘devel...

Sound-proof Sandwich Panel Design via Metamaterial Concept

Science.gov (United States)

Sui, Ni

Sandwich panels consisting of hollow core cells and two face-sheets bonded on both sides have been widely used as lightweight and strong structures in practical engineering applications, but with poor acoustic performance especially at low frequency regime. Basic sound-proof methods for the sandwich panel design are spontaneously categorized as sound insulation and sound absorption. Motivated by metamaterial concept, this dissertation presents two sandwich panel designs without sacrificing weight or size penalty: A lightweight yet sound-proof honeycomb acoustic metamateiral can be used as core material for honeycomb sandwich panels to block sound and break the mass law to realize minimum sound transmission; the other sandwich panel design is based on coupled Helmholtz resonators and can achieve perfect sound absorption without sound reflection. Based on the honeycomb sandwich panel, the mechanical properties of the honeycomb core structure were studied first. By incorporating a thin membrane on top of each honeycomb core, the traditional honeycomb core turns into honeycomb acoustic metamaterial. The basic theory for such kind of membrane-type acoustic metamaterial is demonstrated by a lumped model with infinite periodic oscillator system, and the negative dynamic effective mass density for clamped membrane is analyzed under the membrane resonance condition. Evanescent wave mode caused by negative dynamic effective mass density and impedance methods are utilized to interpret the physical phenomenon of honeycomb acoustic metamaterials at resonance. The honeycomb metamaterials can extraordinarily improve low-frequency sound transmission loss below the first resonant frequency of the membrane. The property of the membrane, the tension of the membrane and the numbers of attached membranes can impact the sound transmission loss, which are observed by numerical simulations and validated by experiments. The sandwich panel which incorporates the honeycomb metamateiral as

Track 2: business outlook and the significance of safety - safety of nuclear power reactor installations in a deregulated environment. Panel Discussion

International Nuclear Information System (INIS)

Schultz, Stephen P.; Floyd, Stephen; Berkow, Herbert N.; Quinn, Edward L.; Hagen, Ronald E.; Esselman, Thomas C.

2001-01-01

Full text of publication follows: Deregulation in the nuclear industry sets the stage for a new production environment with cost and profit-based competition. This not only affects the commercial reactor sector but also is a key element of the U.S. Department of Energy's (DoE's) strategy for facility deployment and commercialization. This panel is designed to explore how these transitions are being made with the assurance of the principle of safety in operations. Panelists have been assembled from industry, the U.S. Nuclear Regulatory Commission (NRC), and DOE to explore these challenges and opportunities in the deregulated operational environment from a variety of perspectives. Presentations by each panelist will be followed by a panel session that will explore both technical and process elements of these major transitions. Success in a deregulated environment requires both safety and economic operation of facilities. With respect to each of these attributes, competition may be expected to result in substantially higher levels of performance. This panel will examine how these expectations are likely to be set, how they will be measured, and what will constitute success. The baseline for evaluation begins with assessment of past performance. The panelists have examined this for both the commercial nuclear reactor sector, as well as for the DOE complex. The Nuclear Energy Institute and the NRC have been working over the past few years on a program to establish new performance indicators for monitoring safety of reactor operation. The session participants will first examine the effectiveness of this system as it is designed to measure performance in today's environment. Second, the panelists will project the capabilities and attributes of this system in monitoring safety in transition to a deregulated, consolidated market. Will these systems have the capability to identify trends that will be significant in this new environment? Will today's system and metrics be

Electricity consumption and economic growth in the GCC countries: Panel data analysis

International Nuclear Information System (INIS)

Osman, Mohamed; Gachino, Geoffrey; Hoque, Ariful

2016-01-01

Applying recent advances in panel data analysis, we investigate the relationship between electricity consumption and economic growth in the GCC countries using annual data from 1975 to 2012. Within a framework which takes into consideration dynamics, heterogeneity and cross-sectional dependence in the panel, we show that the results obtained from using the PMGE, demeaned PMG, AMG, MGE and DFE models indicate a long-run equilibrium relationship between electricity consumption and economic growth. In order to determine the appropriate model and decide the preferred estimator, the Hausman test was performed. The PMGE model emerged as the most efficient of the three estimators. Also, the results obtained revealed a bi-directional causality between economic growth and electricity consumption in these countries, which supports the feedback hypothesis. As a result, this implies that if these countries adopt or implement any energy or electricity conservation policies, this may have a negative impact on its economic growth. - Highlights: • The relationship between electricity consumption and GDP is explored. • Panel data econometric analysis is used to obtain the results. • Bidirectional causality between these variables is observed. • The results support the feedback hypothesis in the GCC countries.

Thermal Analysis of Solar Panels

Science.gov (United States)

Barth, Nicolas; de Correia, João Pedro Magalhães; Ahzi, Saïd; Khaleel, Mohammad Ahmed

In this work, we propose to analyze the thermal behavior of PV panels using finite element simulations (FEM). We applied this analysis to compute the temperature distribution in a PV panel BP 350 subjected to different atmospheric conditions. This analysis takes into account existing formulations in the literature and, based on NOCT conditions, meteorological data was used to validate our approach for different wind speed and solar irradiance. The electrical performance of the PV panel was also studied. The proposed 2D FEM analysis is applied to different region's climates and was also used to consider the role of thermal inertia on the optimization of the PV device efficiency.

Psychophysiological Responses to Group Exercise Training Sessions: Does Exercise Intensity Matter?

Science.gov (United States)

Vandoni, Matteo; Codrons, Erwan; Marin, Luca; Correale, Luca; Bigliassi, Marcelo; Buzzachera, Cosme Franklim

2016-01-01

Group exercise training programs were introduced as a strategy for improving health and fitness and potentially reducing dropout rates. This study examined the psychophysiological responses to group exercise training sessions. Twenty-seven adults completed two group exercise training sessions of moderate and vigorous exercise intensities in a random and counterbalanced order. The %HRR and the exertional and arousal responses to vigorous session were higher than those during the moderate session (psession were less pleasant than those during moderate session (ptraining sessions are intensity-dependent. From an adherence perspective, interventionists are encouraged to emphasize group exercise training sessions at a moderate intensity to maximize affective responses and to minimize exertional responses, which in turn may positively affect future exercise behavior.

Advanced Ultrasupercritical (AUSC) Tube Membrane Panel Development

Energy Technology Data Exchange (ETDEWEB)

Pschirer, James [Alstom Power Inc., Windsor, CT (United States); Burgess, Joshua [Alstom Power Inc., Windsor, CT (United States); Schrecengost, Robert [Alstom Power Inc., Windsor, CT (United States)

2017-08-16

Alstom Power Inc., a wholly owned subsidiary of the General Electric Company (GE), has completed the project “Advanced Ultrasupercritical (AUSC) Tube Membrane Panel Development” under U.S. Department of Energy (DOE) Award Number DE-FE0024076. This project was part of DOE’s Novel Crosscutting Research and Development to Support Advanced Energy Systems program. AUSC Tube Membrane Panel Development was a two and one half year project to develop and verify the manufacturability and serviceability of welded tube membrane panels made from high performance materials suitable for the AUSC steam cycles, defined as high pressure steam turbine inlet conditions of 700-760°C (1292-1400°F) and 24.5-35MPa (3500-5000psi). The difficulty of this challenge lies in the fact that the membrane-welded construction imposes demands on the materials that are unlike any that exist in other parts of the boiler. Tube membrane panels have been designed, fabricated, and installed in boilers for over 50 years with relatively favorable experience when fabricated from carbon and Cr-Mo low alloy steels. The AUSC steam cycle requires membrane tube panels fabricated from materials that have not been used in a weldment with metal temperatures in the range of 582-610°C (1080-1130°F). Fabrication materials chosen for the tubing were Grade 92 and HR6W. Grade 92 is a creep strength enhanced ferritic Cr-Mo alloy and HR6W is a high nickel alloy. Once the materials were chosen, GE performed the engineering design of the panels, prepared shop manufacturing drawings, and developed manufacturing and inspection plans. After the materials were purchased, GE manufactured and inspected the tube membrane panels, determined if post fabrication heat treatment of the tube membrane panels was needed, performed pre- and post-weld heat treatment on the Grade 92 panels, conducted final nondestructive inspection of any heat treated tube membrane panels, conducted destructive inspection of the completed tube

Adaptations to Short, Frequent Sessions of Endurance and Strength Training Are Similar to Longer, Less Frequent Exercise Sessions When the Total Volume Is the Same.

Science.gov (United States)

Kilen, Anders; Hjelvang, Line B; Dall, Niels; Kruse, Nanna L; Nordsborg, Nikolai B

2015-11-01

The hypothesis that the distribution of weekly training across several short sessions, as opposed to fewer longer sessions, enhances maximal strength gain without compromising maximal oxygen uptake was evaluated. Twenty-nine subjects completed an 8-week controlled parallel-group training intervention. One group ("micro training" [MI]: n = 21) performed nine 15-minute training sessions weekly, whereas a second group ("classical training" [CL]: n = 8) completed exactly the same training on a weekly basis but as three 45-minute sessions. For each group, each session comprised exclusively strength, high-intensity cardiovascular training or muscle endurance training. Both groups increased shuttle run performance (MI: 1,373 ± 133 m vs. 1,498 ± 126 m, p ≤ 0.05; CL: 1,074 ± 213 m vs. 1,451 ± 202 m, p training intervention. In conclusion, similar training adaptations can be obtained with short, frequent exercise sessions or longer, less frequent sessions where the total volume of weekly training performed is the same.

Panel 2.18: logistics, information technology (IT), and telecommunications in crisis management.

Science.gov (United States)

De Silva, Terrence; Chikersal, Jyotsna; Snoad, Nigel; Woodworth, Brent; Ghaly, Cherif; Catterall, Martin

2005-01-01

This is a summary of the presentations and discussion of Panel 2.18, Logistics, Information Technology, and Telecommunications in Crisis Management of the Conference, Health Aspects of the Tsunami Disaster in Asia, convened by the World Health Organization (WHO) in Phuket, Thailand, 04-06 May 2005. The topics discussed included issues related to logistics, information technology (IT), and crisis communication pertaining to the responses to the damage created by the Tsunami. It is presented in the following major sections: (1) issues; (2) lessons learned; (3) what was done well; (4) what could have been done better; and (5) conclusions and recommendations. Each major section is presented in four sub-sections: (1) needs assessments; (2) coordination; (3) filling the gaps; and (4) capacity building.

Summary of Session III

International Nuclear Information System (INIS)

Furman, M.A.

2002-01-01

This is a summary of the talks presented in Session III ''Simulations of Electron-Cloud Build Up'' of the Mini-Workshop on Electron-Cloud Simulations for Proton and Positron Beams ECLOUD-02, held at CERN, 15-18 April 2002

Panel discussion: In vivo pet modeling and data analysis

International Nuclear Information System (INIS)

Koeppe, R.A.

1991-01-01

Following the first afternoon session on in vivo PET modeling and data analysis, a panel assembled to discuss in greater detail some of the issues pertinent to the kinetic analysis of PET data. The discussion was opened with a comment on some of the diofficulties of PET imaging in the study of neurotransmitter and receptor systems, including resolution limitations, image distortions, and levels of nonspecific binding. Dr. Hutchins reiterated that the imaging distortions predicted by his simulation studies include both open-quotes scaleclose quotes and open-quotes shape open-quotes distortions. Then the panel discussed the issue of registration of functional (PET) and anatomic (MRI or CT) images. The use of an anatomic image as a road map or guide to where one is in the physiologic PET image is a very important part of performing PET studies. It is at least as important to align a dynamic PET sequence internally, from frame to frame, as it is to align the PET study to an anatomic study. If a dynamic imaging procedure will take 30-90 min or more, a method is needed to assure that the patient has not moved substantially during the procedure or that the movement can be accounted for. Several possibilities were discussed. The next topic considered the issue of model complexity versus model reduction. If a model is too complex, it cannot provide accurate estimates of the model parameters due to the lack of identifiability of individual parameters. Modeling approaches such as simplifying the model to two parameters and changing the experimental protocol to provide more information so model simplification is not necessary were discussed on the basis of the tradeoff between procedural complexity and quality of information

Innovative Software Algorithms and Tools parallel sessions summary

International Nuclear Information System (INIS)

Gaines, Irwin

2001-01-01

A variety of results were presented in the poster and 5 parallel sessions of the Innovative Software, Algorithms and Tools (ISAT) sessions. I will briefly summarize these presentations and attempt to identify some unifying trends

Precast concrete sandwich panels subjected to impact loading

Science.gov (United States)

Runge, Matthew W.

Precast concrete sandwich panels are a relatively new product in the construction industry. The design of these panels incorporates properties that allow for great resilience against temperature fluctuation as well as the very rapid and precise construction of facilities. The concrete sandwich panels investigated in this study represent the second generation of an ongoing research and development project. This second generation of panels have been engineered to construct midsized commercial buildings up to three stories in height as well as residential dwellings. The panels consist of a double-tee structural wythe, a foam core and a fascia wythe, joined by shear connectors. Structures constructed from these panels may be subjected to extreme loading including the effects of seismic and blast loading in addition to wind. The aim of this work was to investigate the behaviour of this particular sandwich panel when subjected to structural impact events. The experimental program consisted of fourteen concrete sandwich panels, five of which were considered full-sized specimens (2700 mm X 1200mm X 270 mm) and nine half-sized specimens (2700mm X 600mm X 270 mm) The panels were subjected to impact loads from a pendulum impact hammer where the total energy applied to the panels was varied by changing the mass of the hammer. The applied loads, displacements, accelerations, and strains at the mid-span of the panel as well as the reaction point forces were monitored during the impact. The behaviour of the panels was determined primarily from the experimental results. The applied loads at low energy levels that caused little to no residual deflection as well as the applied loads at high energy levels that represent catastrophic events and thus caused immediate failure were determined from an impact on the structural and the fascia wythes. Applied loads at intermediate energy levels representing extreme events were also used to determine whether or not the panels could withstand

Case Study - Monitoring the Photovoltaic Panels

OpenAIRE

PACURAR Ana Talida; TOADER Dumitru; PACURAR Cristian

2014-01-01

The photovoltaic cell represents one of the most dynamic and attractive way to converts renewable energy sources in electricity production. That means to convert solar energy into electricity. In this paper is presented a analogy between two types of photovoltaic panels installed, with educational role for students. Also the objective of this paper is to estimate the performance of photovoltaic panels and to provide the best solution for industry. These two types of photovoltaic panels wer...

El Salvador - Rural Electrification - Solar Panels

Data.gov (United States)

Millennium Challenge Corporation — This is a summative qualitative performance evaluation (PE) of the solar panel component of the solar panel component of the RE Sub-Activity. The final report will...

Daytime space cooling with phase change material ceiling panels discharged using rooftop photovoltaic/thermal panels and night-time ventilation

DEFF Research Database (Denmark)

Bourdakis, Eleftherios; Pean, Thibault Quentin; Gennari, Luca

2016-01-01

The possibility of using photovoltaic/thermal panels for producing cold water through the process of night-time radiative cooling was experimentally examined. The cold water was used to discharge phase change material in ceiling panels in a climatic chamber. Both night-time radiative cooling...... the photovoltaic/thermal varied from 56% to 122%. The phase change material ceiling panels were thus, capable of providing an acceptable thermal environment and the photovoltaic/thermal panels were able to provide most of the required electricity and cold water needed for cooling....

Chapter II: Twenty Eighth General Assembly Business Sessions

Science.gov (United States)

Williams, Robert

2015-08-01

The President of the IAU, Prof. Robert Williams, welcomed the delegates and members to this first business session of the General Assembly. The President invited the General Secretary, Dr. Ian Corbett, to start the business session.

Characterization of a Bifacial Photovoltaic Panel Integrated with External Diffuse and Semimirror Type Reflectors

Directory of Open Access Journals (Sweden)

P. Ooshaksaraei

2013-01-01

Full Text Available Silicon wafer accounts for almost one-half the cost of a photovoltaic (PV panel. A bifacial silicon solar cell is attractive due to its potential of enhancing power generation from the same silicon wafer in comparison with a conventional monofacial solar cell. The bifacial PV cell is able to capture solar radiation by back surface. This ability requires a suitable reflector appropriately oriented and separated from the cell’s rear surface. In order to optimize the bifacial solar cell performance with respect to an external back surface reflector, diffuse and semimirror reflectors were investigated at various angles and separations from the back surface. A simple bifacial solar panel, consisting of four monocrystalline Si solar cells, was designed and built. Reflection from the rear surface was provided by an extended semimirror and a white-painted diffuse reflector. Maximum power generation was observed at 30° with respect to ground for the semimirror reflector and 10° for diffuse reflector at an optimized reflector-panel separation of 115 mm. Output power enhancement of 20% and 15% from semimirror and diffuse reflectors, respectively, were observed. This loss from diffuse reflector is attributed to scattering of light beyond the rear surface capture cross-section of the bifacial solar panel.

Numerical Analysis on Variation of Dynamic Response of Girder Bridges with Torsional Reinforcement Panels

Directory of Open Access Journals (Sweden)

Kang Jae-Yoon

2015-01-01

Full Text Available The dynamic flexural behaviour of the railway bridge is influenced by its torsional behaviour. Especially, in the case of girder railway bridges, the dynamic response tends to amplify when the natural frequency in flexure (1st vibration mode is close to that in torsion (2nd vibration mode. In order to prevent such situation, it is necessary to adopt a flexural-to-torsional natural frequency ratio larger than 120%. This study proposes a solution shifting the natural frequency in torsion to high frequency range and restraining torsion by installing concrete panels on the bottom flange of the girder so as to prevent the superposition of the responses in the girder bridge. The applicability of this solution is examined by finite element analysis of the shift of the torsional natural frequency and change in the dynamic response according to the installation of the concrete panels. The analytical results for a 30 m-span girder railway bridge indicate that installing the concrete panels increases the natural frequency in torsion by restraining the torsional behaviour and reduces also the overall dynamic response. It is seen that the installation of 100 mm-thick concrete panels along a section of 4 m at both extremities of the girder can reduce the dynamic response by more than 30%.

Finite element simulation of surface defects in the automobile door outer panel

International Nuclear Information System (INIS)

Fukumura, Masaru; Yamasaki, Yuji; Inage, Daisuke; Fujita, Takashi

2004-01-01

Recently, a sheet metal forming simulation has become an indispensable tool for developing a new model of an automobile part within a limited short period. In these days, the utilization of a springback calculation of the formed part has been increasing. However, only a few papers on the prediction of surface defects have been reported in spite of serious needs.In this paper, surface defects in the door outer panel, especially those around the door handle embossment, have been investigated. Applying an explicit solver to the forming simulation, and an implicit solver to the springback calculation, we have tried to evaluate surface defects in the panel. In order to improve the accuracy of the simulation, numerical tools have been modeled including the precise shape of the draw beads so that the draw bead effects on both the material flow and the restraint on the springback deformation have been considered. Compared with the actual panel shape, which shows apparent surface defects, the simulated result has closely predicted the above defects around the embossment.To demonstrate the applicability of our simulation, a few sensitivity analyses have been carried out, modifying forming conditions such as blank holder force. Each result has shown slight but distinctive differences in the cross section profile of the panel. As a result, it has been realized that the influence of each considered factor on surface defects is qualitatively consistent with our practical knowledge

Abstracts of SIG Sessions.

Science.gov (United States)

Proceedings of the ASIS Annual Meeting, 1994

1994-01-01

Includes abstracts of 18 special interest group (SIG) sessions. Highlights include natural language processing, information science and terminology science, classification, knowledge-intensive information systems, information value and ownership issues, economics and theories of information science, information retrieval interfaces, fuzzy thinking…

Psychophysiological Responses to Group Exercise Training Sessions: Does Exercise Intensity Matter?

Directory of Open Access Journals (Sweden)

Matteo Vandoni

Full Text Available Group exercise training programs were introduced as a strategy for improving health and fitness and potentially reducing dropout rates. This study examined the psychophysiological responses to group exercise training sessions. Twenty-seven adults completed two group exercise training sessions of moderate and vigorous exercise intensities in a random and counterbalanced order. The %HRR and the exertional and arousal responses to vigorous session were higher than those during the moderate session (p<0.05. Consequently, the affective responses to vigorous session were less pleasant than those during moderate session (p<0.05. These results suggest that the psychophysiological responses to group exercise training sessions are intensity-dependent. From an adherence perspective, interventionists are encouraged to emphasize group exercise training sessions at a moderate intensity to maximize affective responses and to minimize exertional responses, which in turn may positively affect future exercise behavior.

Performance analysis of PV panel under varying surface temperature

Directory of Open Access Journals (Sweden)

Kumar Tripathi Abhishek

2018-01-01

Full Text Available The surface temperature of PV panel has an adverse impact on its performance. The several electrical parameters of PV panel, such as open circuit voltage, short circuit current, power output and fill factor depends on the surface temperature of PV panel. In the present study, an experimental work was carried out to investigate the influence of PV panel surface temperature on its electrical parameters. The results obtained from this experimental study show a significant reduction in the performance of PV panel with an increase in panel surface temperature. A 5W PV panel experienced a 0.4% decrease in open circuit voltage for every 1°C increase in panel surface temperature. Similarly, there was 0.6% and 0.32% decrease in maximum power output and in fill factor, respectively, for every 1°C increase in panel surface temperature. On the other hand, the short circuit current increases with the increase in surface temperature at the rate of 0.09%/°C.

76 FR 17995 - Open Meeting of the Taxpayer Advocacy Panel Small Business/Self Employed Correspondence Exam...

Science.gov (United States)

2011-03-31

... Small Business/Self Employed Correspondence Exam Practitioner Engagement Project Committee AGENCY... Taxpayer Advocacy Panel Small Business/ Self Employed Correspondence Exam Practitioner Engagement Project... Section 10(a)(2) of the Federal Advisory Committee Act, 5 U.S.C. App. (1988) that an open meeting of the...

Photoelectric panel with equatorial mounting of drive

Science.gov (United States)

Kukhta, M. S.; Krauinsh, P. Y.; Krauinsh, D. P.; Sokolov, A. P.; Mainy, S. B.

2018-03-01

The relevance of the work is determined by the need to create effective models for sunny energy. The article considers a photoelectric panel equipped with a system for tracking the sun. Efficiency of the system is provided by equatorial mounting, which compensates for the rotation of the Earth by rotating the sunny panel in the plane of the celestial equator. The specificity of climatic and geographical conditions of Tomsk is estimated. The dynamics of power variations of photoelectric panels with equatorial mounting during seasonal fluctuations in Tomsk is calculated. A mobile photovoltaic panel with equatorial mounting of the drive has been developed. The methods of design strategy for placing photovoltaic panels in the architectural environment of the city are presented. Key words: sunny energy, photovoltaics, equatorial mounting, mechatronic model, wave reducer, electric drive.

Buckling Testing and Analysis of Honeycomb Sandwich Panel Arc Segments of a Full-Scale Fairing Barrel: Comparison of In- and Out-of-Autoclave Facesheet Configurations

Science.gov (United States)

Pineda, Evan Jorge; Myers, David E.; Kosareo, Daniel N.; Zalewski, Bart F.; Kellas, Sotiris; Dixon, Genevieve D.; Krivanek, Thomas M.; Gyekenyesi, Thomas G.

2014-01-01

Four honeycomb sandwich panels, representing 1/16th arc segments of a 10-m diameter barrel section of the Heavy Lift Launch Vehicle, were manufactured and tested under the NASA Composites for Exploration and the NASA Constellation Ares V programs. Two configurations were chosen for the panels: 6-ply facesheets with 1.125 in. honeycomb core and 8-ply facesheets with 1.0 in. honeycomb core. Additionally, two separate carbon fiber/epoxy material systems were chosen for the facesheets: in-autoclave IM7/977-3 and out-of-autoclave T40-800b/5320-1. Smaller 3 ft. by 5 ft. panels were cut from the 1/16th barrel sections and tested under compressive loading. Furthermore, linear eigenvalue and geometrically nonlinear finite element analyses were performed to predict the compressive response of each 3 ft. by 5 ft. panel. To improve the robustness of the geometrically nonlinear finite element model, measured surface imperfections were included in the geometry of the model. Both the linear and nonlinear models yielded good qualitative and quantitative predictions. Additionally, it was correctly predicted that the panel would fail in buckling prior to failing in strength. Furthermore, several imperfection studies were performed to investigate the influence of geometric imperfections, fiber angle misalignments, and three-dimensional effects on the compressive response of the panel.

Propulsion Systems Panel deliberations

Science.gov (United States)

Bianca, Carmelo J.; Miner, Robert; Johnston, Lawrence M.; Bruce, R.; Dennies, Daniel P.; Dickenson, W.; Dreshfield, Robert; Karakulko, Walt; Mcgaw, Mike; Munafo, Paul M.

1993-01-01

The Propulsion Systems Panel was established because of the specialized nature of many of the materials and structures technology issues related to propulsion systems. This panel was co-chaired by Carmelo Bianca, MSFC, and Bob Miner, LeRC. Because of the diverse range of missions anticipated for the Space Transportation program, three distinct propulsion system types were identified in the workshop planning process: liquid propulsion systems, solid propulsion systems and nuclear electric/nuclear thermal propulsion systems.

Retaining Ring Fastener for Solar Panels

Science.gov (United States)

Wilson, A. H.

1983-01-01

Simple articulating linkage secures solar panels into supporting framework. Five element linkage collapses into W-shape for easy placement into framework, then expands to form rectangle of same dimensions as those of panel.

International Conference on Fast Reactors and Related Fuel Cycles: Safe Technologies and Sustainable Scenarios (FR13), Paris – March 4-7, 2013: Closing Session. Summary of Sustainability of Advanced Fuel Cycles Panel Session II

International Nuclear Information System (INIS)

Cameron, R.

2013-01-01

Sustainability was discussed in terms of the social, environment and economic perspectives, which arise from the original Brundtland definition of sustainability. The panel presented their perspectives of the need to move towards a sustainable future, involving better use of uranium, reductions in high-level radioactive waste, safe, secure and economic operation of nuclear reactors and the fuel cycle. In all cases, it was considered that sustainability in the long-term must involve fast reactors and a closed nuclear fuel cycle, although both Korea and the IAEA pointed out that these are clearly national decisions and there will not be a single solution for all countries

Working through: In-Session Processes that Promote Between-Session Thoughts and Activities

Science.gov (United States)

Owen, Jesse; Quirk, Kelley; Hilsenroth, Mark J.; Rodolfa, Emil

2012-01-01

This study examined whether clients' ratings of the working alliance as well as their perception of cognitive-behavioral (CB) and psychodynamic-interpersonal (PI) techniques (delivered by therapists who used both) were associated with clients' intersession processes (i.e., their thoughts about therapy and therapeutic activity between sessions).…

Lipid Panel

Science.gov (United States)

... A routine cardiac risk assessment typically includes a fasting lipid panel. Beyond that, research continues into the usefulness of other non-traditional markers of cardiac risk, such as Lp-PLA 2 . A health practitioner may choose to evaluate one or more ...

The CRRES high efficiency solar panel

International Nuclear Information System (INIS)

Trumble, T.M.

1991-01-01

This paper reports on the High Efficiency Solar Panel (HESP) experiments which is to provide both engineering and scientific information concerning the effects of space radiation on advanced gallium arsenide (GaAs) solar cells. The HESP experiment consists of an ambient panel, and annealing panel and a programmable load. This experiment, in conjunction with the radiation measurement experiments abroad the CREES, provides the first opportunity to simultaneously measure the trapped radiation belts and the results of radiation damage to solar cells. The engineering information will result in a design guide for selecting the optimum solar array characteristics for different orbits and different lifetimes. The scientific information will provide both correlation of laboratory damage effects to space damage effects and a better model for predicting effective solar cell panel lifetimes

Analysis of Palm Oil Production, Export, and Government Consumption to Gross Domestic Product of Five Districts in West Kalimantan by Panel Regression

Science.gov (United States)

Sulistianingsih, E.; Kiftiah, M.; Rosadi, D.; Wahyuni, H.

2017-04-01

Gross Domestic Product (GDP) is an indicator of economic growth in a region. GDP is a panel data, which consists of cross-section and time series data. Meanwhile, panel regression is a tool which can be utilised to analyse panel data. There are three models in panel regression, namely Common Effect Model (CEM), Fixed Effect Model (FEM) and Random Effect Model (REM). The models will be chosen based on results of Chow Test, Hausman Test and Lagrange Multiplier Test. This research analyses palm oil about production, export, and government consumption to five district GDP are in West Kalimantan, namely Sanggau, Sintang, Sambas, Ketapang and Bengkayang by panel regression. Based on the results of analyses, it concluded that REM, which adjusted-determination-coefficient is 0,823, is the best model in this case. Also, according to the result, only Export and Government Consumption that influence GDP of the districts.

Summary of the session on other effects

International Nuclear Information System (INIS)

Chao, A.

1997-07-01

The theme of this workshop is to discuss the effects of foreign particles on the native beam in a storage ring. This paper summarizes the session on effects not covered in sessions on fast ion instability, electron cloud instability, and cures. The topics discussed are the beam, the foreign particle, how are foreign particles trapped, and how do foreign particles and beam couple

EPA Accepting Public Comments on Nominees for the Federal Insecticide, Fungicide, and Rodenticide Act Scientific Advisory Panel (FIFRA SAP)

Science.gov (United States)

FRN professional affiliations of recent nominees by the National Institutes of Health and the National Science Foundation for service on the FIFRA Scientific Advisory Panel established under section 25(d) of the FIFRA

What is significant about a single nursing session? An exploratory study.

Science.gov (United States)

Miller, Elizabeth M

2017-09-10

Researchers and clinicians specializing in breastfeeding often rely on measuring one nursing session to characterize the breastfeeding relationship. However, less is known about the descriptive or statistically predictive characteristics of one nursing session. The purposes of this study are twofold: (1) to explore the relationships between variables in a single nursing session; and (2) to study the association between variables in a single nursing session and infant length-for-age (LAZ) and weight-for-age (WAZ). In 63 nursing mother-infant pairs in the United States, anthropometric measurement and observation of a single nursing session revealed six nursing session variables: fore milk fat percent, hind milk fat percent, infant milk intake, duration of session, time since last session, and time of day of session. A principle factor analysis, undertaken to explore latent variables underlying the six session variables, revealed two factors: (1) loaded highly on fore and hind milk fat percentage, reflecting the overall fat percent in a feed; and (2) loaded highly on milk intake and hind milk fat percentage, indicating the process of breast emptying. In multivariate analyses of all session variables on infant LAZ and WAZ, only hind milk fat percentage was significantly negatively associated with LAZ (β = -0.14, P = .01 (two-tailed), R 2  = 0.070), confirmed by a significant negative association between LAZ and factor one (β = -0.32, P = .05 (two-tailed), R 2  = 0.090). This research describes the dynamics of a single nursing session, and has the potential to help explain variation in infant growth and nutrition. © 2017 Wiley Periodicals, Inc.

Poster session in instructional technology course

Science.gov (United States)

Diniaty, Artina; Fauzi'ah, Lina; Wulan Febriana, Beta; Arlianty, Widinda Normalia

2017-12-01

Instructional technology course must be studied by students in order to 1) understand the role of technology in learning, 2) capable of analyzing advantages and disadvantages of using technology in teaching, 3) capable of performing technology in teaching. A poster session in instructional technology course was performed to 1) enhance students' interest in this course and develop students' creativity. The step of this research includes: planning, implementation, and evaluation. The result showed that students' responses towards poster session in instructional technology course were good.

A chemometrics study of analytical panels in virgin olive oil. An approach for evaluating panels in training

Directory of Open Access Journals (Sweden)

Aparicio, R.

1991-06-01

Full Text Available A mathematical procedure including Canonical Correlation, Factor and cluster analysis and Multiple Regression was designed to study whether two different sensory panels, with different levels of training, could be considered as a unity. Among others, correlations between each attribute of both panels, matrices of partial correlations, variance explained by the most important factors and similarity among clusters were computed as the procedure to evaluate if a Panel in training works as well as an expertise. In addition, every one of the factors was correlated with the final evaluation of quality for analyzing the interrelationship between the profile notes and the grading table of virgin olive oil quality from a mathematical point of view. Finally, a stepwise multiple correlation analyzes how the panels modeled the evaluated samples. Promising directions for future research are also suggested.

Un procedimiento matemático que incluye Correlación Canónica, Análisis Factorial y de "clusters", y Regresión Múltiple fue diseñado para estudiar si dos paneles analíticos, con diferentes niveles de entrenamiento, podrían ser considerados idénticos. Para evaluar si un panel en o después de un entrenamiento opera tan bien como uno experto, se analizaron las correlaciones entre los atributos de ambos paneles, las matrices de correlaciones parciales, la varianza explicada por los factores más importantes y la similaridad entre los aglomerados ("clusters" entre otras. Además, los tres factores más importantes fueron correlacionados con las valoraciones finales de calidad, para conocer la interrelación entre la hoja de perfil y la tabla de puntuación. Finalmente, un análisis de regresión múltiple permite conocer cómo es el modelo que los paneles han diseñado para muestras de aceite de oliva virgen evaluadas. También se sugieren las tendencias en la investigación futura.

77 FR 75491 - Entry-Level Driver Training; Public Listening Session

Science.gov (United States)

2012-12-20

... identified are supported by research and data analyses, including cost/benefit considerations. The session...-27748] Entry-Level Driver Training; Public Listening Session AGENCY: Federal Motor Carrier Safety Administration (FMCSA), DOT. ACTION: Notice of public listening session. SUMMARY: FMCSA announces that it will...

Session 1 - discussion

International Nuclear Information System (INIS)

Wells, C.; Richards, K.M.; McKerrow, J.F.

1991-01-01

This discussion session of the Landfill Gas-Energy and Environment 90 Conference covered the landfill gas potential, the setting up of the Non-Fossil Fuel Obligation; anticipated developments in the post 1998 period, the problem of smell for those who live near a landfill, and the length of time a landfill site is productive in terms of gas evolution. Relevant regulations in California are briefly discussed. (author)

Improving the Electrical Parameters of a Photovoltaic Panel by Means of an Induced or Forced Air Stream

Directory of Open Access Journals (Sweden)

R. Mazón-Hernández

2013-01-01

Full Text Available The main priority in photovoltaic (PV panels is the production of electricity. The transformation of solar energy into electricity depends on the operating temperature in such a way that the performance increases with the decreasing temperatures. In the existing literature, different cooling techniques can be found. The purpose of most of them is to use air or water as thermal energy carriers. This work is focused on the use of air as a working fluid whose movement is either induced by natural convection or forced by means of a fan. The aim of this study is to characterise the electrical behaviour of the solar panels in order to improve the design of photovoltaic installations placed in roof applications ensuring low operating temperatures which will correct and reverse the effects produced on efficiency by high temperature. To do this, a test installation has been constructed at the Universidad Politécnica de Cartagena in Spain. In this paper, the results of the tests carried out on two identical solar panels are included. One of them has been modified and mounted on different channels through which air flows. The different studies conducted show the effects of the air channel cross-section, the air velocity, and the panel temperature on the electrical parameters of the solar panels, such as the voltage, current, power, and performance. The results conclude that the air space between the photovoltaic panels and a steel roof must be high enough to allow the panel to be cooled and consequently to achieve higher efficiency.

76 FR 37121 - Medicare Program; Second Semi-Annual Meeting of the Advisory Panel on Ambulatory Payment...

Science.gov (United States)

2011-06-24

... . News media representatives must contact our Public Affairs Office at (202) 690-6145. Advisory.... SUPPLEMENTARY INFORMATION: I. Background The Secretary is required by section 1833(t)(9)(A) of the Social..., payment adjustments, or correct code usage are not within the scope of the Panel's purpose. Therefore...

Summary of Session 3

International Nuclear Information System (INIS)

Fleischer, J.

2004-01-01

In Session 3, the speakers were dealing with the following topics: Automatization of Feynman Diagram Calculations (FDC), Event generators, Analytical approaches to FDC and various Mathematical innovations related to different physical problems. A more general, 'brainstorming', talk was given by J. Vermaseren as first talk

76 FR 62455 - Aerospace Safety Advisory Panel; Meeting

Science.gov (United States)

2011-10-07

... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice (11-088)] Aerospace Safety Advisory Panel... Aeronautics and Space Administration announces a forthcoming meeting of the Aerospace Safety Advisory Panel... Burch, Aerospace Safety Advisory Panel Administrative Officer, National Aeronautics and Space...

78 FR 1265 - Aerospace Safety Advisory Panel; Meeting

Science.gov (United States)

2013-01-08

... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice 13-001] Aerospace Safety Advisory Panel... Aeronautics and Space Administration announces a forthcoming meeting of the Aerospace Safety Advisory Panel..., Aerospace Safety Advisory Panel Executive Director, National Aeronautics and Space Administration...

Panels of microporous insulation

Energy Technology Data Exchange (ETDEWEB)

McWilliams, J.A.; Morgan, D.E.; Jackson, J.D.J.

1990-08-07

Microporous thermal insulation materials have a lattice structure in which the average interstitial dimension is less than the mean free path of the molecules of air or other gas in which the material is arranged. This results in a heat flow which is less than that attributable to the molecular heat diffusion of the gas. According to this invention, a method is provided for manufacturing panels of microporous thermal insulation, in particular such panels in which the insulation material is bonded to a substrate. The method comprises the steps of applying a film of polyvinyl acetate emulsion to a non-porous substrate, and compacting powdery microporous thermal insulation material against the film so as to cause the consolidated insulation material to bond to the substrate and form a panel. The polyvinyl acetate may be applied by brushing or spraying, and is preferably allowed to dry prior to compacting the insulation material. 1 fig.

Working session 4: Preventative and corrective measures

International Nuclear Information System (INIS)

Clark, R.; Slama, G.

1997-01-01

The Preventive and Corrective Measures working session included 13 members from France, Germany, Japan, Spain, Slovenia, and the United States. Attendee experience included regulators, utilities, three steam generator vendors, consultants and researchers. Discussions centered on four principal topics: (1) alternate materials, (2) mechanical mitigation, (3) maintenance, and (4) water chemistry. New or replacement steam generators and original equipment steam generators were separately addressed. Four papers were presented to the session, to provide information and stimulate various discussion topics. Topics discussed and issues raised during the several meeting sessions are provided below, followed by summary conclusions and recommendations on which the group was able to reach a majority consensus. The working session was composed of individuals with diverse experience and varied areas of specialized expertise. The somewhat broad range of topics addressed by the group at times saw discussion participation by only a few individuals. As in any technical meeting where all are allowed the opportunity to speak their mind, straying from an Individual topic was not unusual. Where useful, these stray topics are also presented below within the context In which they occurred. The main categories of discussion were: minimize sludge; new steam generators; maintenance; mechanical mitigation; water chemistry

77 FR 17073 - Medicare, Medicaid, and Children's Health Insurance Programs; Meeting of the Advisory Panel on...

Science.gov (United States)

2012-03-23

... section 1804 of the Social Security Act (the Act), requiring the Secretary to provide informational... Primary Care Association; Marjorie Cadogan, Executive Deputy Commissioner, Department of Social Services... meeting will include the following: Welcome and Listening Session with CMS Leadership Recap of the...

77 FR 37681 - Medicare, Medicaid, and Children's Health Insurance Programs; Meeting of the Advisory Panel on...

Science.gov (United States)

2012-06-22

... imposed by section 1804 of the Social Security Act (the Act), requiring the Secretary to provide... Care Association, Marjorie Cadogan, Executive Deputy Commissioner, Department of Social Services..., 2012 meeting will include the following: Welcome and Listening Session with CMS Leadership Recap of the...

Design scenarios for flat panel photobioreactors

International Nuclear Information System (INIS)

Slegers, P.M.; Wijffels, R.H.; Straten, G. van; Boxtel, A.J.B. van

2011-01-01

Evaluation of the potential of algae production for biofuel and other products at various locations throughout the world requires assessment of algae productivity under varying light conditions and different reactor layouts. A model was developed to predict algae biomass production in flat panel photobioreactors using the interaction between light and algae growth for the algae species Phaeodactylum tricornutum and Thalassiosira pseudonana. The effect of location, variable sunlight and reactor layout on biomass production in single standing and parallel positioned flat panels was considered. Three latitudes were studied representing the Netherlands, France and Algeria. In single standing reactors the highest yearly biomass production is achieved in Algeria. During the year biomass production fluctuates the most in the Netherlands, while it is almost constant in Algeria. Several combinations of path lengths and biomass concentrations can result in the same optimal biomass production. The productivity in parallel place flat panels is strongly influenced by shading and diffuse light penetration between the panels. Panel orientation has a large effect on productivity and at higher latitudes the difference between north-south and east-west orientation may go up to 50%.

A Panel Cointegration Analysis: Thailand’s International Tourism Demand Model

OpenAIRE

Prasert Chaitip; Chukiat Chaiboonsri

2009-01-01

This paper sought to find the long-run relationships between international tourist arrivals in Thailand and economic variables such as GDP, cost of transportation and exchange rates for the period 1986 to 2007. Also this paper used five standard panel unit root tests such as LLC (2002) panel unit root test, Breitung (2000) panel unit root test, IPS (2003) panel unit root test, Maddala and Wu (1999), Choi (2001) panel unit root test, Handri (1999) panel unit root test. Moreover, the panel coin...

Human Research Program 2010 Chair Standing Review Panel Meeting

Science.gov (United States)

Steinberg, Susan

2011-01-01

The 13 Human Research Program (HRP) Standing Review Panel (SRP) Chairs, and in some cases one or two additional panel members (see section XIV, roster) referred to as the Chair (+1) SRP throughout this document, met at the NASA Johnson Space Center (JSC) on December 7, 2010 to allow the HRP Elements and Projects to report on their progress over the past year, their current status, and their plans for the upcoming year based on NASA's current goals and objectives for human space exploration. A large focus of the meeting was also used to discuss integration across the HRP scientific disciplines based on a recommendation from the 2009 HRP SRP review. During the one-day meeting, each of the HRP Elements and Projects presented the changes they made to the HRP Integrated Research Plan (IRP Rev. B) over the last year, and what their top three areas of integration are between other HRP Elements/Projects. The Chair (+1) SRP spent sufficient time addressing the panel charge, either as a group or in a separate closed session, and the Chair (+1) SRP and the HRP presenters and observers, in most cases, had sufficient time to discuss during and after the presentations. The SRP made a final debriefing to the HRP Program Scientist, Dr. John B. Charles, prior to the close of the meeting on December 7, 2010. Overall, the Chair (+1) SRP concluded that most of the HRP Elements/Projects did a commendable job during the past year in addressing integration across the HRP scientific disciplines with the available resources. The Chair (+1) SRP agreed that the idea of integration between HRP Elements/Projects is noble, but believes all parties involved should have the same definition of integration, in order to be successful. The Chair (+1) SRP also believes that a key to successful integration is communication among the HRP Elements/Projects which may present a challenge. The Chair (+1) SRP recommends that the HRP have a workshop on program integration (with HRP Element

Sensing our air: the quest for big data about our air quality

Science.gov (United States)

These slides will be presented as part of a panel session at the GovLoop virtual training session on innovation in the government, with the panel session topic focusing on big data and emerging "internet of things". The slides are to provide some background and raise a few topic...

76 FR 19147 - Aerospace Safety Advisory Panel; Meeting.

Science.gov (United States)

2011-04-06

... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice (11-030)] Aerospace Safety Advisory Panel... Aeronautics and Space Administration announce a forthcoming meeting of the Aerospace Safety Advisory Panel.... Kathy Dakon, Aerospace Safety Advisory Panel Executive Director, National Aeronautics and Space...

78 FR 56941 - Aerospace Safety Advisory Panel; Meeting

Science.gov (United States)

2013-09-16

... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice: 13-114] Aerospace Safety Advisory Panel... Aeronautics and Space Administration announces a forthcoming meeting of the Aerospace Safety Advisory Panel.... Harmony Myers, Aerospace Safety Advisory Panel Executive Director, National Aeronautics and Space...

77 FR 25502 - Aerospace Safety Advisory Panel; Meeting

Science.gov (United States)

2012-04-30

... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice (12-030)] Aerospace Safety Advisory Panel... Aeronautics and Space Administration announce a forthcoming meeting of the Aerospace Safety Advisory Panel... FURTHER INFORMATION CONTACT: Ms. Harmony Myers, Aerospace Safety Advisory Panel Executive Director...

77 FR 38090 - Aerospace Safety Advisory Panel; Meeting.

Science.gov (United States)

2012-06-26

... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice 12-044] Aerospace Safety Advisory Panel... Aeronautics and Space Administration announces a forthcoming meeting of the Aerospace Safety Advisory Panel.... Harmony Myers, Aerospace Safety Advisory Panel Executive Director, National Aeronautics and Space...

75 FR 61219 - Aerospace Safety Advisory Panel; Meeting

Science.gov (United States)

2010-10-04

... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice (10-116)] Aerospace Safety Advisory Panel... Aeronautics and Space Administration announces a forthcoming meeting of the Aerospace Safety Advisory Panel... Dakon, Aerospace Safety Advisory Panel Executive Director, National Aeronautics and Space Administration...

77 FR 58413 - Aerospace Safety Advisory Panel; Meeting

Science.gov (United States)

2012-09-20

... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice 12-074] Aerospace Safety Advisory Panel... Aeronautics and Space Administration announces a forthcoming meeting of the Aerospace Safety Advisory Panel.... Harmony Myers, Aerospace Safety Advisory Panel Executive Director, National Aeronautics and Space...

ECG changes after a session of regional intraarterial hyperglycemia

International Nuclear Information System (INIS)

Korobchenko, Z.A.; Livshits, L.I.

1988-01-01

ECG changes after a session of regional intraarterial hyperglycemia (RIH) in 13 patients (the mean age of 49 years) with locally advanced cancer of the tongue, oral mucosa and oropharynx were presented. Taking into account the mean age of patients and the negative ECG time course after a RIH session, the necessity of patients' examination (including ECG after a RIH session and, when indicated, a consultation by a cardiologist) was emphasized

Photovoltaic Thermal panels in collective thermal solar systems

International Nuclear Information System (INIS)

Elswijk, M.J.; Strootman, K.J.; Jong, M.J.M.; De Lange, E.T.N.; Smit, W.F.

2003-12-01

A feasibility study has been carried out to assess the options to apply photovoltaic/thermal panels (PVT-panels) in collective solar thermal systems in urban areas in the Netherlands. The study was focused on the technical (architecture and installations) and the economical feasibility of collective PVT-systems in comparison with conventional solar thermal systems and combinations of photovoltaic (PV) panels and solar collectors. The results of the study also give insight into cost and the market for PVT-panels. Three case studies in which collective solar collector systems were applied are analyzed again by simulating the installation of a PVT-panels system and a separate solar thermal PV system [nl

75 FR 6407 - Aerospace Safety Advisory Panel; Meeting

Science.gov (United States)

2010-02-09

... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice (10- 020)] Aerospace Safety Advisory Panel... Aeronautics and Space Administration announce a forthcoming meeting of the Aerospace Safety Advisory Panel... FURTHER INFORMATION CONTACT: Ms. Kathy Dakon, Aerospace Safety Advisory Panel Executive Director, National...

Evaluation of Thin Kevlar-Epoxy Fabric Panels Subjected to Shear Loading

Science.gov (United States)

Baker, Donald J.

1996-01-01

The results of an analytical and experimental investigation of 4-ply Kevlar-49-epoxy panels loaded by in-plane shear are presented. Approximately one-half of the panels are thin-core sandwich panels and the other panels are solid-laminate panels. Selected panels were impacted with an aluminum sphere at a velocity of either 150 or 220 ft/sec. The strength of panels impacted at 150 ft/sec was not reduced when compared to the strength of the undamaged panels, but the strength of panels impacted at 220 ft/sec was reduced by 27 to 40 percent. Results are presented for panels that were cyclically loaded from a load less than the buckling load to a load in the postbuckling load range. The thin-core sandwich panels had a lower fatigue life than the solid panels. The residual strength of the solid and sandwich panels cycled more than one million cycles exceeded the baseline undamaged panel strengths. The effect of hysteresis in the response of the sandwich panels is not significant. Results of a nonlinear finite element analysis conducted for each panel design are presented.

Strong increase of solar panels

International Nuclear Information System (INIS)

Segers, R.; Janssen, S.

2012-01-01

The number of installed solar panels in 2011 has increased again. 40 megawatt of new panels have been installed. This increase is twice as high as the year before. The production of solar power increased to 90 million kWh in 2011 as a result of this expansion. However, the share of solar power in total energy use is still very limited. [nl

Gene panel testing for inherited cancer risk.

Science.gov (United States)

Hall, Michael J; Forman, Andrea D; Pilarski, Robert; Wiesner, Georgia; Giri, Veda N

2014-09-01

Next-generation sequencing technologies have ushered in the capability to assess multiple genes in parallel for genetic alterations that may contribute to inherited risk for cancers in families. Thus, gene panel testing is now an option in the setting of genetic counseling and testing for cancer risk. This article describes the many gene panel testing options clinically available to assess inherited cancer susceptibility, the potential advantages and challenges associated with various types of panels, clinical scenarios in which gene panels may be particularly useful in cancer risk assessment, and testing and counseling considerations. Given the potential issues for patients and their families, gene panel testing for inherited cancer risk is recommended to be offered in conjunction or consultation with an experienced cancer genetic specialist, such as a certified genetic counselor or geneticist, as an integral part of the testing process. Copyright © 2014 by the National Comprehensive Cancer Network.

78 FR 36793 - Aerospace Safety Advisory Panel; Meeting

Science.gov (United States)

2013-06-19

... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice 13-068] Aerospace Safety Advisory Panel... Aeronautics and Space Administration announce a forthcoming meeting of the Aerospace Safety Advisory Panel..., Huntsville, AL 35805 FOR FURTHER INFORMATION CONTACT: Ms. Harmony Myers, Aerospace Safety Advisory Panel...

Adaptations to short, frequent sessions of endurance and strength training are similar to longer, less frequent exercise sessions when the total volume is the same

DEFF Research Database (Denmark)

Kilen, Anders; Hjelvang, Line B; Dall, Niels

2015-01-01

]: n = 21) performed nine 15-minute training sessions weekly, whereas a second group ("classical training" [CL]: n = 8) completed exactly the same training on a weekly basis but as three 45-minute sessions. For each group, each session comprised exclusively strength, high-intensity cardiovascular...

Improving the efficiency of photovoltaic (PV) panels by oil coating

International Nuclear Information System (INIS)

Abd-Elhady, M.S.; Fouad, M.M.; Khalil, T.

2016-01-01

Highlights: • It is possible to improve the efficiency of PV panels by increasing the amount of light transmitted to the panel. • Coating PV panels by a fine layer of Labovac oil increases the amount of sun light transmitted to the panel. • Coating PV panels by a fine layer of Labovac oil increases the power output of the panel. • Coating PV panels with a layer of Labovac oil has to be applied in cold countries and not in hot regions. - Abstract: The objective of this research is to develop a new technique for improving the efficiency of Photovoltaic (PV) panels. This technique is done by coating the front surface of the PV panel by a fine layer of oil in order to increase the amount of light transmitted to the panel, and consequently its efficiency. Different types of oils are examined, including both mineral oils and natural oils. In case of mineral oils; vacuum pump oil (Labovac oil), engine oil (Mobil oil) and brake oil (Abro oil) are examined, while in case of natural oils; olive and sunflower oils are examined. An experimental setup has been developed to examine the performance of the PV panels as a function of oil coatings. The experimental setup consists of an artificial sun, the PV panel under investigation, a cooling system and a measuring system to measure the performance of the panel. It has been found that coating the PV panel with a fine layer of Labovac oil, ∼1 mm thick, improves the efficiency of the PV panel by more than 20%, and this is due to the high transmissivity of the Labovac oil compared to other oils. However, the Labovac oil has a drawback which is overheating of the panel due to its high transmissivity. Coating of PV panels with a fine layer of Labovac oil should be done only in cold regions, in order to avoid the heating effect that can decrease the power output of PV panels.

Blood Test: Comprehensive Metabolic Panel (CMP)

Science.gov (United States)

... Staying Safe Videos for Educators Search English Español Blood Test: Comprehensive Metabolic Panel (CMP) KidsHealth / For Parents / Blood ... de sangre: panel metabólico ampliado What Is a Blood Test? A blood test is when a sample of ...

OLED Luminaire with Panel Integrated Drivers and Advanced Controls

Energy Technology Data Exchange (ETDEWEB)

Lu, Michael [Acuity Brands Lighting, Inc., Atlanta, GA (United States); Spindler, Jeff [OLEDWorks, Rochester, NY (United States)

2017-01-31

For this DOE award, Acuity Brands Lighting developed a novel OLED luminaire system featuring panel-integrated drivers at each individual OLED panel. The luminaire has a base station that receives user commands and performs AC/DC conversion. A power line communication (PLC) protocol is used to provide both power and digital control to each panel. A 66-panel CanvisTM luminaire using state-of-art OLED panels based on this system was successfully constructed. This is a first demonstration of such a luminaire architecture. It is also the first known implementation of this number of independently addressable nodes with a PLC protocol. This luminaire system architecture has added benefits in the flexibility of using multiple panel vendors for a given product, forward compatibility with future panels, and reduced luminaire wiring complexity and assembly time.

Magnetic evaluation of a solar panel using HTS-SQUID

Energy Technology Data Exchange (ETDEWEB)

Kiwa, Toshihiko, E-mail: kiwa@okayama-u.ac.jp; Fukudome, Yohei; Miyazaki, Shingo; Saari, Mohd Mawardi; Sakai, Kenji; Tsukada, Keiji

2013-11-15

Highlights: •The magnetic evaluation system of a solar panel using HTS-SQUID has been developed. •The electric circuits made by the discrete devices on the circuit board were visualized. •The electric properties of the commercial solar panels were demonstrated. -- Abstract: The magnetic evaluation system of a solar panel using HTS-SQUID has been proposed and developed. A normal pick-up coil was applied to detect the tangential magnetic field to the panel surface. Since the detected field could be related to the currents of the solar panels, the electric properties of the solar panels could be evaluated. In this work, the evaluation of the electric properties of the commercial solar panels as well as the electric circuits made by the discrete devices on the circuit board was visualized.

Magnetic evaluation of a solar panel using HTS-SQUID

International Nuclear Information System (INIS)

Kiwa, Toshihiko; Fukudome, Yohei; Miyazaki, Shingo; Saari, Mohd Mawardi; Sakai, Kenji; Tsukada, Keiji

2013-01-01

Highlights: •The magnetic evaluation system of a solar panel using HTS-SQUID has been developed. •The electric circuits made by the discrete devices on the circuit board were visualized. •The electric properties of the commercial solar panels were demonstrated. -- Abstract: The magnetic evaluation system of a solar panel using HTS-SQUID has been proposed and developed. A normal pick-up coil was applied to detect the tangential magnetic field to the panel surface. Since the detected field could be related to the currents of the solar panels, the electric properties of the solar panels could be evaluated. In this work, the evaluation of the electric properties of the commercial solar panels as well as the electric circuits made by the discrete devices on the circuit board was visualized

Fabrication and testing of fire resistant graphite composite panels

Science.gov (United States)

Roper, W. D.

1986-01-01

Eight different graphite composite panels were fabricated using four different resin matrices. The resin matrices included Hercules 71775, a blend of vinylpolystyrpyridine and bismaleimide, H795, a bismaleimide, Cycom 6162, a phenolic, and PSP 6022m, a polystyrylpyridine. Graphite panels were fabricated using fabric or unidirectional tape. Described are the processes for preparing these panels and some of their mechanical, thermal and flammability properties. Panel properties are compared with state-of-the-art epoxy fiberglass composite panels.

Panel Data Evidence on the Demand for Money

OpenAIRE

Serletis, Apostolos; Vaccaro, Jason

2006-01-01

This paper examines the demand for money using panel data for 48 countries over the 1980-95 time period. In our examination of the conventional money demand function, we begin by empirically exploiting traditional panel methodology and fi nd support for heterogeneity among the countries. However, specifi cation and diagnostic tests also indicate serial correlation in all of the estimated models. Recent state-of-the art advances in panel unit root and panel cointegration methodology allow us t...

A Faculty Development Session or Resident as Teacher Session for Didactic and Clinical Teaching Techniques; Part 1 of 2: Engaging Learners with Effective Didactic Teaching

Directory of Open Access Journals (Sweden)

Megan Boysen-Osborn

2016-07-01

Full Text Available Audience: This workshop is intended for faculty members in an emergency medicine (or other residency program, but is also appropriate for chief residents and medical student educators, including basic science faculty. Introduction: Faculty development sessions are required by the Accreditation Council for Graduate Medical Education and enhance the learning environment within residency programs. Resident as teacher sessions are important in helping residents transition from junior learners to supervisors of medical students and junior residents. Part I of this two-part workshop introduces learners to effective techniques to engaging learners during didactic sessions. Objectives: By the end of this workshop, the learner will: 1 describe eight teaching techniques that encourage active learning during didactic sessions; 2 plan a didactic session using at least one of eight new teaching techniques for didactic instruction. Methods: This educational session is uses several blended instructional methods, including team-based learning (classic and modified, the flipped classroom, audience response systems, pause procedures in order to demonstrate effective didactic teaching techniques.

Sustainable Absorption Panels from Agricultural Wastes

Directory of Open Access Journals (Sweden)

Ismail F.Z.

2014-01-01

Full Text Available Noise has become a serious environmental problem and there are demands for alternative sustainable materials which capable to reduce the noise level at various frequency ranges. Therefore, the aim of this research is to study the potential of turning the agricultural waste and waste paper into a sound absorption panel. For the purpose of this study, combination of two materials was under studied; coconut coir fibre from agriculture waste and shredded waste paper from the office. There were two main objective of the research; first is to develop absorption panels from coconut coir powder that available locally with a combination of shredded paper at different percentage of mixture. Second objective is to identify the absorption rate of the panels. The study encompasses the fabrication of the particle board using the coconut husk powder mix with shredded waste paper and using the gypsum powder as the binder for the two materials. Four acoustic panels of size 0.5m x 0.5m and 0.012 m thick were fabricated with different mix ratio; 25% of coconut coir powder mixed with 75% of shredded waste papers for sample 1, 50% both of the material for sample 2, 75% of coconut coir powder mixed with 25% of shredded waste paper for sample 3, and lastly 100% of coconut coir powder for sample 4. The absorption coefficient of the panels was tested in a reverberation chamber and in accordance with ISO 354:1985 standards. Based on the results, sample 1 gave the highest absorption coefficient compared to sample 2, 3 and 4. It can be concluded that the acoustic panel made from a mixture of 25% coconut coir powder with 75% shredded waste paper provided higher absorption coefficient compared to the performance of the other samples. This might be caused by the size of the coir powder which is very small, creating less void space in between the panel and thus causing it to absorb less sound. Since sound absorption is very much affected by the availability of void space of

Low frequency noise reduction using stiff light composite panels

Institute of Scientific and Technical Information of China (English)

DENG Yongchang; LIN Weizheng

2003-01-01

The experiment presented in this paper is to investigate and analyze the noise reduction at low frequency using stiff light composite panels. Since these composite panels are made of lightweight and stiff materials, this actuation strategy will enable the creation of composite panels for duct noise control without using traditional heavy structural mass. The results suggest that the mass-spring resonance absorption in the case of a comparatively stiff thick panel with a thin flexible plate is more efficient with minimum weight, when subjected to low-frequency (<500 Hz). The efficiency of the panel absorber depends on the mass of the thin flexible plate and the stiffness of the panel.

Failure mode prediction for composite structural insulated panels with MgO board facings

Science.gov (United States)

Smakosz, Łukasz; Kreja, Ireneusz

2018-01-01

Sandwich panels are readily used in civil engineering due to their high strength to weight ratio and the ease and speed of assembly. The idea of a sandwich section is to combine thin and durable facings with a light-weight core and the choice of materials used allows obtaining the desired behaviour. Panels in consideration consist of MgO (magnesium oxide) board facings and expanded polystyrene core and are characterized by immunity to biological corrosion, a high thermal insulation and a relatively low impact on environment. Customizing the range of panels to meet market needs requires frequent size changes, leading to different failure modes, which are identified in a series of costly full-scale laboratory tests. A nonlinear numerical model was created with a use of a commercial ABAQUS code and a user-defined procedure, which is able to reproduce observed failure mechanisms; its parameters were established on the basis of small-scale tests and numerical experiments. The model was validated by a comparison with the results of the full-scale bending and compression tests. The results obtained were in satisfactory agreement with the test data.

77 FR 2983 - Medicare, Medicaid, and Children's Health Insurance Programs; Meeting of the Advisory Panel on...

Science.gov (United States)

2012-01-20

... duties are imposed by section 1804 of the Social Security Act (the Act), requiring the Secretary to..., Department of Social Services; Jonathan Dauphine, Senior Vice President, AARP; Barbara Ferrer, Executive... and Listening Session with CMS Leadership; Recap of the Previous (November 17, 2011) Meeting...

75 FR 58405 - Medicare Program; Meeting of the Advisory Panel on Medicare Education, October 13, 2010

Science.gov (United States)

2010-09-24

... are imposed by section 1804 of the Social Security Act (the Act), requiring the Secretary to provide... President, Social Mission Programs, Independence Blue Cross; Richard C. Frank, M.D., Director, Cancer... Committee Work Summary. Medicare Outreach and Education Strategies. Public Comment. Listening Session with...

77 FR 70785 - Medicare, Medicaid, and Children's Health Insurance Programs; Meeting of the Advisory Panel on...

Science.gov (United States)

2012-11-27

... * * * by law.'' Such duties are imposed by section 1804 of the Social Security Act (the Act), requiring the...; Marjorie Cadogan, Executive Deputy Commissioner, Department of Social Services; Jonathan Dauphine, Senior..., 2012 meeting will include the following: Welcome and Listening Session with CMS Leadership. Recap of...

76 FR 37120 - Medicare, Medicaid, and Children's Health Insurance Programs; Meeting of the Advisory Panel on...

Science.gov (United States)

2011-06-24

... * * * by law.'' Such duties are imposed by section 1804 of the Social Security Act (the Act), requiring the... Center; Marjorie Cadogan, Executive Deputy Commissioner, Department of Social Services; Jonathan Dauphine... 28, 2011 meeting will include the following: Welcome and Listening Session with CMS Leadership...

Characterization of Air-Based Photovoltaic Thermal Panels with Bifacial Solar Cells

Directory of Open Access Journals (Sweden)

P. Ooshaksaraei

2013-01-01

Full Text Available Photovoltaic (PV panels account for a majority of the cost of photovoltaic thermal (PVT panels. Bifacial silicon solar panels are attractive for PVT panels because of their potential to enhance electrical power generation from the same silicon wafer compared with conventional monofacial solar panels. This paper examines the performance of air-based bifacial PVT panels with regard to the first and second laws of thermodynamics. Four air-based bifacial PVT panels were designed. The maximum efficiencies of 45% to 63% were observed for the double-path-parallel bifacial PVT panel based on the first law of thermodynamics. Single-path bifacial PVT panel represents the highest exergy efficiency (10%. Double-path-parallel bifacial PVT panel is the second preferred design as it generates up to 20% additional total energy compared with the single-path panel. However, the daily average exergy efficiency of a double-path-parallel panel is 0.35% lower than that of a single-path panel.

Global status of recycling waste solar panels: A review.

Science.gov (United States)

Xu, Yan; Li, Jinhui; Tan, Quanyin; Peters, Anesia Lauren; Yang, Congren

2018-05-01

With the enormous growth in the development and utilization of solar-energy resources, the proliferation of waste solar panels has become problematic. While current research into solar panels has focused on how to improve the efficiency of the production capacity, the dismantling and recycling of end-of-life (EOL) panels are seldom considered, as can be seen, for instance, in the lack of dedicated solar-panel recycling plants. EOL solar-panel recycling can effectively save natural resources and reduce the cost of production. To address the environmental conservation and resource recycling issues posed by the huge amount of waste solar panels regarding environmental conservation and resource recycling, the status of the management and recycling technologies for waste solar panels are systemically reviewed and discussed in this article. This review can provide a quantitative basis to support the recycling of PV panels, and suggests future directions for public policy makers. At present, from the technical aspect, the research on solar panel recovery is facing many problems, and we need to further develop an economically feasible and non-toxic technology. The research on solar photovoltaic panels' management at the end of life is just beginning in many countries, and there is a need for further improvement and expansion of producer responsibility. Copyright © 2018 Elsevier Ltd. All rights reserved.

Safety Training: scheduled sessions in April

CERN Multimedia

DGS Unit

2011-01-01

The following training courses are scheduled in April. You can find the full Safety Training programme on the Safety Training online catalogue. If you are interested in attending any of the below courses, please talk to your supervisor, then apply electronically via EDH from the course description pages, by clicking on SIGN-UP. Registration for all courses is always open – sessions for the less-requested courses are organized on a demand-basis only. Depending on the demand, a session will be organised later in the year. Biocell Training 26-APR-11 (08.30 – 10.00) in French 26-APR-11 (10.30 – 12.00) in French Conduite de plates-formes élévatrices mobiles de personnel (PEMP) 28-APR-11 to 29-APR-11 (08.00 – 17.30) in French* Sécurité chimique – Introduction 29-APR-11 (09.00 – 11.30) in French (*) session in French with the possibility of receiving the documentation in English   By Isabelle Cusato (H...

75 FR 17701 - High Energy Physics Advisory Panel

Science.gov (United States)

2010-04-07

... DEPARTMENT OF ENERGY High Energy Physics Advisory Panel AGENCY: Department of Energy, Office of... Physics Advisory Panel (HEPAP). Federal Advisory Committee Act (Pub. L. 92-463, 86 Stat. 770) requires... Energy Physics Advisory Panel; U.S. Department of Energy; SC-25/ Germantown Building, 1000 Independence...

Performance Evaluation of PV Panel Under Dusty Condition

Directory of Open Access Journals (Sweden)

Abhishek Kumar Tripathi

2017-11-01

Full Text Available The performance of PV panel depends on the incoming sunlight on its surface. The accumulated airborne dust particles on panel surface creates a barrier in the path of sunlight and panel surface, which significantly reduces the amount of solar radiation falling on the panel surface. The present study shows a significant reduction in short circuit current and power output of PV panel due to dust deposition on its surface, whereas the reduction in open circuit voltage is not much prominent. This study has been carried in the field as well as in the laboratory. The reduction in maximum power output of PV panel for both the studies ensures a linear relation with the dust deposition on its surface. In the field study, the reduction in the power output due to 12.86gm of dust deposition on the panel surface was 43.18%, whereas in the laboratory study it was 44.75% due to 11gm of dust deposition Article History: Received July 10th 2017; Received in revised form Sept 15th 2017x; Accepted 1st Oct 2017; Available online How to Cite This Article: Tripathi, A.K., Aruna, M. and Murthy, Ch.,S.N. (2017. Performance Evaluation of PV Panel Under Dusty Condition. International Journal of Renewable Energy Develeopment, 6(3, 225-233. https://doi.org/10.14710/ijred.6.3.225-233

Origami-Inspired Folding of Thick, Rigid Panels

Science.gov (United States)

Trease, Brian P.; Thomson, Mark W.; Sigel, Deborah A.; Walkemeyer, Phillip E.; Zirbel, Shannon; Howell, Larry; Lang, Robert

2014-01-01

To achieve power of 250 kW or greater, a large compression ratio of stowed-to-deployed area is needed. Origami folding patterns were used to inspire the folding of a solar array to achieve synchronous deployment; however, origami models are generally created for near-zero-thickness material. Panel thickness is one of the main challenges of origami-inspired design. Three origami-inspired folding techniques (flasher, square twist, and map fold) were created with rigid panels and hinges. Hinge components are added to the model to enable folding of thick, rigid materials. Origami models are created assuming zero (or near zero) thickness. When a material with finite thickness is used, the panels are required to bend around an increasingly thick fold as they move away from the center of the model. The two approaches for dealing with material thickness are to use membrane hinges to connect the panels, or to add panel hinges, or hinges of the same thickness, at an appropriate width to enable folding.

The Atomic Safety and Licensing Board Panel

International Nuclear Information System (INIS)

1998-01-01

Through the Atomic Energy Act, Congress made is possible for the public to get a full and fair hearing on civilian nuclear matters. Individuals who are directly affected by any licensing action involving a facility producing or utilizing nuclear materials may participate in a formal hearing, on the record, before independent judges on the Atomic Safety and Licensing Board Panel (ASLBP or Panel). Frequently, in deciding whether a license, permit, amendment, or extension should be granted to a particular applicant, the Panel members must be more than mere umpires. If appropriate, they are authorized to go beyond the issues the parties place before them in order to identify, explore, and resolve significant questions involving threats to the public health and safety that come to a board's attention during the proceedings. This brochure explains the purpose of the panel. Also addressed are: type of hearing handled; method of public participation; formality of hearings; high-level waste; other panel responsibilities and litigation technology

Packaging, deployment, and panel design concepts for a truss-stiffened 7-panel precision deployable reflector with feed boom

Science.gov (United States)

Heard, Walter L., Jr.; Collins, Timothy J.; Dyess, James W.; Kenner, Scott; Bush, Harold G.

1993-01-01

A concept is presented for achieving a remotely deployable truss-stiffened reflector consisting of seven integrated sandwich panels that form the reflective surface, and an integrated feed boom. The concept has potential for meeting aperture size and surface precision requirements for some high-frequency microwave remote sensing applications. The packaged reflector/feed boom configuration is a self-contained unit that can be conveniently attached to a spacecraft bus. The package has a cylindrical envelope compatible with typical launch vehicle shrouds. Dynamic behavior of a deployed configuration having a 216-inch focal length and consisting of 80-inch-diameter, two-inch-thick panels is examined through finite-element analysis. Results show that the feed boom and spacecraft bus can have a large impact on the fundamental frequency of the deployed configuration. Two candidate rib-stiffened sandwich panel configurations for this application are described, and analytical results for panel mass and stiffness are presented. Results show that the addition of only a few rib stiffeners, if sufficiently deep, can efficiently improve sandwich panel stiffness.

Panel-basierte Mixed-Methods-Studien

OpenAIRE

Legewie, Nicolas; Tucci, Ingrid

2016-01-01

Mixed-Methods-Studien erfreuen sich wachsender Beliebtheit. Immer mehr Studien nutzen dabei auch Panel-basierte Mixed-Methods-Designs, in denen bestehende Längsschnittstudien durch qualitative Befragungsformen ergänzt werden. Innerhalb der reichhaltigen Veröffentlichungen zum Thema Mixed-Methods-Forschung finden sich bisher aber kaum Diskussionen solcher Mixed-Methods-Designs. Im vorliegenden Artikel diskutieren wir Design, Durchführung, sowie Potenzialeund Herausforderungen von Panel-basiert...

Measurement, calculation and evaluation of photon production cross-sections

International Nuclear Information System (INIS)

Kocherov, N.P.

1990-11-01

The meeting proceedings were divided into three sessions devoted to the following topics: Experimental measurement and techniques (3 papers), calculation of photon cross-sections (9 papers), and evaluation (2 papers). A separate abstract was prepared for each of these papers. Refs, figs and tabs

Summary Of Session 5: How Should We Handle Safety?

Energy Technology Data Exchange (ETDEWEB)

Albert, M.; Roy, G

2001-07-01

This session was originally titled 'Safety: Who cares?' in a fairly provocative way. A clear conclusion of this session and discussions that were held at the workshop is that there is a wide concern for safety among the people in charge of control room operations. This was shown as well by the quality of the seven talks presented in this session on subjects ranging from safety standards to a practical case of a safety incident. (author)

Summary Of Session 5: How Should We Handle Safety?

International Nuclear Information System (INIS)

Albert, M.; Roy, G.

2001-01-01

This session was originally titled 'Safety: Who cares?' in a fairly provocative way. A clear conclusion of this session and discussions that were held at the workshop is that there is a wide concern for safety among the people in charge of control room operations. This was shown as well by the quality of the seven talks presented in this session on subjects ranging from safety standards to a practical case of a safety incident. (author)

75 FR 73166 - Art Advisory Panel-Closed Meeting

Science.gov (United States)

2010-11-29

... DEPARTMENT OF THE TREASURY Internal Revenue Service Art Advisory Panel--Closed Meeting AGENCY: Internal Revenue Service, Treasury. ACTION: Notice of Closed Meeting of Art Advisory Panel for Decorative Art. SUMMARY: A closed meeting of the Art Advisory Panel will be held in Washington, DC. DATES: The...

50 CFR 600.760 - Fishery Negotiation Panel lifetime.

Science.gov (United States)

2010-10-01

... 50 Wildlife and Fisheries 8 2010-10-01 2010-10-01 false Fishery Negotiation Panel lifetime. 600... ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE MAGNUSON-STEVENS ACT PROVISIONS Fishery Negotiation Panels § 600.760 Fishery Negotiation Panel lifetime. (a) An FNP shall terminate upon either: (1) Submission of...

Summary of Session 2 'Machine Studies'

Energy Technology Data Exchange (ETDEWEB)

Assmann, R W; Papotti, G [European Organization for Nuclear Research, Geneva (Switzerland)

2012-07-01

This document summarizes the talks and discussion that took place in the second session of the Chamonix 2012 workshop concerning results from machine studies performed in 2011. The session consisted of the following presentations: “LHC experience with different bunch spacings” by G. Rumolo; “Observations of beam-beam effects in MDs in 2011” by W. Herr; “Beam-induced heating/ bunch length/RF and lessons for 2012” by E. Metral; “Lessons in beam diagnostics” by R. Jones; “Quench margins” by M. Sapinski; “First demonstration with beam of the Achromatic Telescopic Squeeze (ATS)” by S. Fartoukh. (author)

Summary of Session 2 "Machine Studies"

CERN Document Server

Assmann, R W

2012-01-01

This document summarizes the talks and discussion that took place in the second session of the Chamonix 2012 workshop concerning results from machine studies performed in 2011. The session consisted of the following presentations: “LHC experience with different bunch spacings” by G. Rumolo; “Observations of beam-beam effects in MDs in 2011” by W. Herr; “Beam-induced heating/ bunch length/RF and lessons for 2012” by E. Metral; “Lessons in beam diagnostics” by R. Jones; “Quench margins” by M. Sapinski; “First demonstration with beam of the Achromatic Telescopic Squeeze (ATS)” by S. Fartoukh.

Optimal reconstructed section thickness for the detection of liver lesions with multidetector CT

International Nuclear Information System (INIS)

Soo, G.; Lau, K.K.; Yik, T.; Kutschera, P.

2010-01-01

Aim: To evaluate the impact of different reconstructed section thicknesses on liver lesion detection using multidetector computed tomography (CT). Methods: Fifty-three patients were examined using a 16-section CT machine with axial reconstructions provided at 2.5, 5, 7.5, and 10 mm section thicknesses. Images of different reconstructed section thicknesses from different patients were presented in random order to three independent, blinded radiologists for review at multiple sessions. All images were then reviewed by three radiologists in a common session. Consensus was reached following review of the previous interpretation results and results of follow-up imaging regarding the number of true liver lesions (n = 101) for comparison. Results: Mean detection rates were as follows: 93/101 lesions detected with the 2.5 mm section thickness, 98/101 lesions detected at the 5 mm section thickness, 78/101 lesions detected at the 7.5 mm section thickness, and 54/101 lesions detected at the 10 mm section thickness. Lesions missed at the 2.5 mm section thickness were due to masking by image noise. There was particular difficulty detecting subcapsular lesions and lesions adjacent to fissures or the gall bladder at the 7.5 mm and 10 mm section thicknesses. Conclusion: The optimal reconstructed section thickness for lesion detection in the liver was 5 mm.

Geothermal Technologies Program Blue Ribbon Panel Recommendations

Energy Technology Data Exchange (ETDEWEB)

none,

2011-06-17

The Geothermal Technologies Program assembled a geothermal Blue Ribbon Panel on March 22-23, 2011 in Albuquerque, New Mexico for a guided discussion on the future of geothermal energy in the United States and the role of the DOE Program. The Geothermal Blue Ribbon Panel Report captures the discussions and recommendations of the experts. An addendum is available here: http://www.eere.energy.gov/geothermal/pdfs/gtp_blue_ribbon_panel_report_addendum10-2011.pdf

78 FR 32664 - Medicare, Medicaid, and Children's Health Insurance Programs; Meeting of the Advisory Panel on...

Science.gov (United States)

2013-05-31

... . . . by law.'' Such duties are imposed by section 1804 of the Social Security Act (the Act), requiring the... Cadogan, Executive Deputy Commissioner, Department of Social Services; Jonathan Dauphine, Senior Vice... include the following: Welcome and Listening Session with CMS Leadership Recap of the Previous (March 27...

78 FR 12327 - Medicare, Medicaid, and Children's Health Insurance Programs; Meeting of the Advisory Panel on...

Science.gov (United States)

2013-02-22

... * * * by law.'' Such duties are imposed by section 1804 of the Social Security Act (the Act), requiring the... Cadogan, Executive Deputy Commissioner, Department of Social Services; Jonathan Dauphine, Senior Vice..., 2013 meeting will include the following: Welcome and Listening Session with CMS Leadership Recap of the...

76 FR 61365 - Medicare, Medicaid, and Children's Health Insurance Programs; Meeting of the Advisory Panel on...

Science.gov (United States)

2011-10-04

... * * * by law.'' Such duties are imposed by section 1804 of the Social Security Act (the Act), requiring the... Cadogan, Executive Deputy Commissioner, Department of Social Services; Jonathan Dauphine, Senior Vice... include the following: Recap of the Previous (July 28, 2011) Meeting Listening Session with CMS Leadership...

78 FR 53769 - Medicare, Medicaid, and Children's Health Insurance Programs; Meeting of the Advisory Panel on...

Science.gov (United States)

2013-08-30

... . . . by law.'' Such duties are imposed by section 1804 of the Social Security Act (the Act), requiring the...; Marjorie Cadogan, Executive Deputy Commissioner, Department of Social Services; Jonathan Dauphine, Senior...: Welcome and Listening Session with CMS Leadership Recap of the Previous (June 24, 2013) Meeting Affordable...

Mode system effects in an online panel study : Comparing a probability-based online panel with two face-to-face reference surveys

NARCIS (Netherlands)

Struminskaya, Bella; de Leeuw, E.D.; Kaczmirek, Lars

2015-01-01

One of the methods for evaluating online panels in terms of data quality is comparing the estimates that the panels provide with benchmark sources. For probability-based online panels, high-quality surveys or government statistics can be used as references. If differences among the benchmark and the

Danish translation and validation of the International Skin Tear Advisory Panel Skin Tear Classification System

DEFF Research Database (Denmark)

Skiveren, J; Bermark, S; LeBlanc, K

2015-01-01

OBJECTIVE: The aim of this study was to translate, validate and establish reliability of the International Skin Tear Classification System in Danish. METHOD: Phase 1 of the project involved the translation of the International Skin Tear Advisory Panel (ISTAP) Skin Tear Classification System......) and social and health-care assistants (non-RN) from both primary health care and a Danish university hospital in Copenhagen. Thirty photographs, with equal representation of the three types of skin tears, were selected to test validity. The photographs chosen were those originally used for internal...... and external validation by the ISTAP group. The subjects were approached in their place of work and invited to participate in the study and to attend an educational session related to skin tears. RESULTS: The Danish translation of the ISTAP classification system was tested on 270 non-wound specialists...

Sound transmission through triple-panel structures lined with poroelastic materials

Science.gov (United States)

Liu, Yu

2015-03-01

In this paper, previous theories on the prediction of sound transmission loss for a double-panel structure lined with poroelastic materials are extended to address the problem of a triple-panel structure. Six typical configurations are considered for a triple-panel structure based on the method of coupling the porous layers to the facing panels which determines critically the sound insulation performance of the system. The transfer matrix method is employed to solve the system by applying appropriate types of boundary conditions for these configurations. The transmission loss of the triple-panel structures in a diffuse sound field is calculated as a function of frequency and compared with that of corresponding double-panel structures. Generally, the triple-panel structure with poroelastic linings has superior acoustic performance to the double-panel counterpart, remarkably in the mid-high frequency range and possibly at low frequencies, by selecting appropriate configurations in which those with two air gaps in the structure exhibit the best overall performance over the entire frequency range. The poroelastic lining significantly lowers the cut-on frequency above which the triple-panel structure exhibits noticeably higher transmission loss. Compared with a double-panel structure, the wider range of system parameters for a triple-panel structure due to the additional partition provides more design space for tuning the sound insulation performance. Despite the increased structural complexity, the triple-panel structure lined with poroelastic materials has the obvious advantages in sound transmission loss while without the penalties in weight and volume, and is hence a promising replacement for the widely used double-panel sandwich structure.

Touch panel system for control applications

International Nuclear Information System (INIS)

Crook, K.; Johnson, R.

1976-12-01

The use of finger-sensitive touch panels in association with computer-generated displays for control and monitoring of the Stanford linear accelerator is discussed. This control concept has proven to be very effective. The hardware and software aspects of the Touch Panel portion of the control system are described

Design for whipping pipe impact on reinforced concrete panels

International Nuclear Information System (INIS)

Chen, C.C.; Gurbuz, O.

1984-01-01

This paper describes determination of local and overall effects on reinforced concrete panels due to whipping pipe impact in postulated pipe break events. Local damage includes the prediction of minimum concrete panel thickness required to prevent spalling from the back face of the target reinforced concrete panels. Evaluation of overall effect deals with the ductility ratio calculation for the target reinforced concrete panels. Design curves for determining the minimum panel thickness and the minimum reinforcement of reinforced concrete panels are presented in this paper for some cases commonly encountered in nuclear applications. The methodology and the results provided can be used to determine if an existing reinforced concrete wall is capable of resisting the whipping pipe impact, and consequently, if pipe whip restraints can be eliminated

Linear Strength Vortex Panel Method for NACA 4412 Airfoil

Science.gov (United States)

Liu, Han

2018-03-01

The objective of this article is to formulate numerical models for two-dimensional potential flow over the NACA 4412 Airfoil using linear vortex panel methods. By satisfying the no penetration boundary condition and Kutta condition, the circulation density on each boundary points (end point of every panel) are obtained and according to which, surface pressure distribution and lift coefficients of the airfoil are predicted and validated by Xfoil, an interactive program for the design and analysis of airfoil. The sensitivity of results to the number of panels is also investigated in the end, which shows that the results are sensitive to the number of panels when panel number ranges from 10 to 160. With the increasing panel number (N>160), the results become relatively insensitive to it.

progress on the U.S.-Russian excess weapons plutonium disposition program. Panel discussion

International Nuclear Information System (INIS)

Feinroth, Herb; Sicard, Bruno; Kudryavtsev, Evgeny; Sprankle, Kenneth A.; Nesbit, Steve; Gadsby, Robert; Aratani, Kiyonori

2001-01-01

Full text of publication follows: On September 1, 2000, the United States and Russia signed a historic agreement to each dispose of 34 tons of excess weapons plutonium by 2025, or sooner if possible. The agreement was conditional on international financing of the Russian program. The parties are now attempting to establish a specific program for disposition of the Russian plutonium and to secure commitments for international financing of the Russian program. In the United States, efforts are moving forward to design, license, and construct the necessary facilities for its disposition program. With the assistance of France and Germany, efforts are moving forward in Russia to plan and design appropriate reactor modifications as well as the needed facilities for plutonium conversion and mixed-oxide fabrication. Japan and Canada are also participants in the Russian disposition program. This panel session will review the status of actions taken to bring this agreement to fruition. (authors)

Ballistic study of Tensylon®–based panels

Directory of Open Access Journals (Sweden)

L-C. Alil

2018-06-01

Full Text Available Ballistic protection is a matter of interest requested by civilian as well as military needs. The last decade has witnessed an increase in the use of light weight and efficient armour systems. These panels may be used for body protection as well as light vehicle protection against small calibres or to enhance the protection level of heavier vehicles with decreasing or maintaining their weight penalty. Ultra high molecular weight polyethylene is a material of interest for light weight armour applications. The authors designed panels made of hot–pressed Tensylon® in different configurations with thin steel sheets as a backing and shield protection. Comparison of their ballistic performance to the theory predictions reveals the improved ballistic response of the panels. In addition, a non–pressed Tensylon® panel has been tested in order to facilitate the observations of the failure mechanisms inside the panels. Even if not suitable for practical use, such non–pressed panels clearly reveal the dynamic processes at micro–scale that occur during the impact. The failure mechanisms of the material under bullet penetration are discussed based on photography, optical microscopy and scanning electron microscopy. The supposed effects of the panel pressing are discussed based on the observed difference between pressed and non–pressed structures ballistic response.

High Efficiency, High Density Terrestrial Panel. [for solar cell modules

Science.gov (United States)

Wohlgemuth, J.; Wihl, M.; Rosenfield, T.

1979-01-01

Terrestrial panels were fabricated using rectangular cells. Packing densities in excess of 90% with panel conversion efficiencies greater than 13% were obtained. Higher density panels can be produced on a cost competitive basis with the standard salami panels.

Predicting E-commerce Consumer Behaviour Using Sparse Session Data

OpenAIRE

Thorrud, Thorstein Kaldahl; Myklatun, Øyvind

2015-01-01

This thesis research consumer behavior in an e-commerce domain by using a data set of sparse session data collected from an anonymous European e-commerce site. The goal is to predict whether a consumer session results in a purchase, and if so, which items are purchased. The data is supplied by the ACM Recommender System Challenge, which is a yearly challenge held by the ACM Recommender System Conference. Classification is used for predicting whether or not a session made a purchase, as w...

Predicting panel scores by linguistic analysis

Energy Technology Data Exchange (ETDEWEB)

Van den Besselaar, P.; Stout, L.; Gou, X

2016-07-01

In this paper we explore the use of text analysis for deriving quality indicators of project proposals. We do full text analysis of 3030 review reports. After term extraction, we aggregate the term occurrences to linguistic categories. Using thse linguistic categories as independent variables, we study how well these predict the grading by the review panels. Together, the different linguistic categories explain about 50% of the variance in the grading of the applications. The relative importance of the different linguistic categories inform us about the way the panels work. This can be used to develop altmetrics for the quality of the peer and panel review processes. (Author)

Summary of the relativistic heavy ion sessions

International Nuclear Information System (INIS)

Harris, J.W.

1988-01-01

The topics covered in the Relativistic Heavy Ion Sessions span four orders of magnitude in energy in the laboratory and a few more in theory. In the two years since the last Intersections conference, experiments in the field of very high energy heavy ion research have begun at CERN and Brookhaven. The prime motivation for these experiments is the possibility of forming quark matter. This paper is a review of the topics covered in the Relativistic Heavy Ion Sessions