How the Change in IBS Criteria From Rome III to Rome IV Impacts on Clinical Characteristics and Key Pathophysiological Factors.

Science.gov (United States)

Aziz, Imran; Törnblom, Hans; Palsson, Olafur S; Whitehead, William E; Simrén, Magnus

2018-06-08

The diagnostic criteria for irritable bowel syndrome (IBS) have recently been updated from Rome III to Rome IV. Whereas in Rome III a diagnosis of IBS entailed chronic abdominal pain or discomfort at least 3 days per month, in Rome IV the term discomfort has been removed and the frequency of abdominal pain increased to at least 1 day per week. We examined how this change in IBS criteria impacts on clinical characteristics and pathophysiological factors. A total of 542 Swedish subjects with Rome III IBS completed a baseline questionnaire enquiring for the number of abdominal pain days in the last 10 days; this was subsequently used as a surrogate marker to identify Rome IV IBS, in that (a) those with 0 or 1 day of pain were classed as Rome IV-negative, and (b) those with ≥2 days of pain were classed as Rome IV-positive. Comparisons were made between Rome IV-positive and -negative IBS groups for demographics, IBS subtype, gastrointestinal and psychological symptoms, somatisation, fatigue, disease-specific quality of life, rectal sensitivity, and oro-anal transit time. Overall, 85% of Rome III IBS patients fulfilled the Rome IV criteria for IBS, but 15% did not. Rome IV-positive subjects were significantly more likely to be female, have poorer quality of life, greater pain severity, bloating, somatisation, fatigue, and rectal sensitivity than Rome IV-negative subjects. There were no differences in severity of anxiety or depression, IBS subtypes, bowel habit dissatisfaction, or oro-anal transit time. Finally, increasing number of pain days correlated positively with symptoms and visceral hypersensitivity. Most Rome III-positive IBS patients seeking healthcare fulfil the Rome IV IBS criteria. They constitute a more severe group than those who lose their IBS diagnosis.

The use of multi criteria analysis to compare the operating scenarios of the hybrid generation system of wind turbines, photovoltaic modules and a fuel cell

Science.gov (United States)

Ceran, Bartosz

2017-11-01

The paper presents the results of the use of multi-criteria analysis to compare hybrid power generation system collaboration scenarios (HSW) consisting of wind turbines, solar panels and energy storage electrolyzer - PEM type fuel cell with electricity system. The following scenarios were examined: the base S-I-hybrid system powers the off-grid mode receiver, S-II, S-III, S-IV scenarios-electricity system covers 25%, 50%, 75% of energy demand by the recipient. The effect of weights of the above-mentioned criteria on the final result of the multi-criteria analysis was examined.

Abdominal pain-related functional gastrointestinal disorders based on Rome III criteria in a pediatric gastroenterology clinic.

Science.gov (United States)

Talachian, Elham; Bidari, Ali; Zahmatkesh, Hamed

2015-01-01

Functional gastrointestinal disorders (FGIDs) entail several distinct conditions that collectively account for a sizeable proportion of patients complaining of abdominal pain. Physicians' awareness is fundamental to avoid unnecessary evaluations and to alleviate stress-related problems. This study aimed to assess the relative frequencies of FGIDs and related categories in a selected Iranian population. We conducted this cross-sectional study in a gastroenterology clinic of a tertiary care pediatric hospital in Iran. Children and adolescents between the age of 4 and 18 years referred to the clinic from October 2011 to February 2013 were enrolled if they were diagnosed with FGID according to the Rome III criteria. A structured questionnaire was used to collect data on demographic characteristics, pain location, duration and frequency, associated symptoms, and pertinent family history. We used descriptive analyses to show mean (±SD) and relative frequencies of categories of FGIDs. We diagnosed 183 (114 female) with FGIDs out of 1307 children and adolescents who were visited in the clinic. There was history of psychiatric disorders in 42 (22.9%) participants, and migraine headaches and gastrointestinal disorders were at least in one of the parents in 21 (11.5%) and 64 (34.9%) participants, respectively. We defined 84 (46%) patients under Irritable Bowel Syndrome (IBS) category, 38 (21%) under Abdominal Migraine, 26 (14%) under Functional Abdominal Pain, 21 (11%) under Functional Dyspepsia, and 7 (4%) under Functional Abdominal Pain Syndrome. Seven children (4%) had no defining feature for FGID categories and therefore labeled as unclassified. FGID was a prevalent diagnosis among children and adolescents with abdominal pain. IBS was the largest category. Only a minority were unclassifiable under the Rome III criteria, indicating improved differentiation characteristics of Rome III criteria compared to the Rome II version.

Prevalence of Metabolic Syndrome in Elderly and Agreement among Four Diagnostic Criteria

International Nuclear Information System (INIS)

Saad, Maria Auxiliadora Nogueira; Cardoso, Gilberto Perez; Martins, Wolney de Andrade; Velarde, Luis Guillermo Coca; Cruz, Rubens Antunes Filho da

2014-01-01

Metabolic syndrome (MS) is an aggregation of risk factors that increase the incidence of cardiovascular events and diabetes mellitus (DM). Population aging is accompanied by higher prevalence of MS, which varies depending on the population studied and the diagnostic criteria used. To determine prevalence of MS in the elderly using four diagnostic criteria and agreement between them. Cross-sectional study on 243 patients older than 60 years (180 women) in Niterói, RJ. They were evaluated by clinical examination, fasting glucose, fasting insulin, lipid profile and anthropometric measurements - weight, height, waist circumference and waist/hip ratio. Prevalence of MS was estimated by World Health Organization (WHO) modified, National Cholesterol Education Program - Adult Treatment Panel III (NCEP-ATP III), International Diabetes Federation (IDF) and Joint Interim Statement (JIS) criteria. Prevalence was high with the four criteria WHO (51.9%), NCEP-ATPIII (45.2%), IDF (64.1%) and JIS (69.1%), and agreement between criteria by kappa was moderate in almost all comparisons WHO vs. IDF (k = 0.47;95% confidence interval (CI), 0.35 to 0.58); WHO vs. NCEP-ATPIII (k = 0.51; 95% CI, 0.40 to 0.61); WHO vs. JIS (k = 0.45; 95% CI, 0.33 to 0.56); IDF vs. NCEP-ATPIII (k = 0.55; 95% CI, 0.45 to 0.65) and NCEP-ATPIII vs. JIS (k = 0.53; 95% CI, 0.43-0.64), except between IDF vs. JIS (K = 0.89;95% CI, 0.83 to 0.95), which was considered good. Prevalence of MS was high with the four diagnostic criteria, mainly by JIS. There was good agreement between JIS and IDF criteria and moderate among the others

Prevalence of Metabolic Syndrome in Elderly and Agreement among Four Diagnostic Criteria

Energy Technology Data Exchange (ETDEWEB)

Saad, Maria Auxiliadora Nogueira, E-mail: auxiliadorasaad@yahoo.com.br [Fundação Municipal de Saúde de Niterói, Niterói, RJ (Brazil); Cardoso, Gilberto Perez; Martins, Wolney de Andrade; Velarde, Luis Guillermo Coca; Cruz, Rubens Antunes Filho da [Universidade Federal Fluminense, Niterói, RJ (Brazil)

2014-03-15

Metabolic syndrome (MS) is an aggregation of risk factors that increase the incidence of cardiovascular events and diabetes mellitus (DM). Population aging is accompanied by higher prevalence of MS, which varies depending on the population studied and the diagnostic criteria used. To determine prevalence of MS in the elderly using four diagnostic criteria and agreement between them. Cross-sectional study on 243 patients older than 60 years (180 women) in Niterói, RJ. They were evaluated by clinical examination, fasting glucose, fasting insulin, lipid profile and anthropometric measurements - weight, height, waist circumference and waist/hip ratio. Prevalence of MS was estimated by World Health Organization (WHO) modified, National Cholesterol Education Program - Adult Treatment Panel III (NCEP-ATP III), International Diabetes Federation (IDF) and Joint Interim Statement (JIS) criteria. Prevalence was high with the four criteria WHO (51.9%), NCEP-ATPIII (45.2%), IDF (64.1%) and JIS (69.1%), and agreement between criteria by kappa was moderate in almost all comparisons WHO vs. IDF (k = 0.47;95% confidence interval (CI), 0.35 to 0.58); WHO vs. NCEP-ATPIII (k = 0.51; 95% CI, 0.40 to 0.61); WHO vs. JIS (k = 0.45; 95% CI, 0.33 to 0.56); IDF vs. NCEP-ATPIII (k = 0.55; 95% CI, 0.45 to 0.65) and NCEP-ATPIII vs. JIS (k = 0.53; 95% CI, 0.43-0.64), except between IDF vs. JIS (K = 0.89;95% CI, 0.83 to 0.95), which was considered good. Prevalence of MS was high with the four diagnostic criteria, mainly by JIS. There was good agreement between JIS and IDF criteria and moderate among the others.

Delamination tolerance studies in laminated composite panels

Indian Academy of Sciences (India)

Abstract. Determination of levels of tolerance in delaminated composite panels is an important issue in composite structures technology. The primary intention is to analyse delaminated composite panels and estimate Strain. Energy Release Rate (SERR) parameters at the delamination front to feed into acceptability criteria.

Patients Suspected of Irritable Bowel Syndrome-Cross-Sectional Study Exploring the Sensitivity of Rome III Criteria in Primary Care

DEFF Research Database (Denmark)

Engsbro, Anne Line; Begtrup, Luise Mølenberg; Kjeldsen, Jens

2013-01-01

The Rome III criteria for irritable bowel syndrome (IBS) are recommended by guidelines to help identify the syndrome. The majority of IBS patients are managed in primary care, where a pragmatic approach to diagnosis is usually adopted, using clinical judgment and knowledge about the patient. Many...

EFSA NDA Panel (EFSA Panel on Dietetic Products, Nutrition and Allergies), 2014. Scientific Opinion on Dietary Reference Values for chromium

DEFF Research Database (Denmark)

Tetens, Inge

2014-01-01

parenteral nutrition was considered to be the most convincing, but overall data do not provide sufficient information on the reversibility of the possible deficiencies and the nature of any dose–response curve in order to identify a dietary requirement for humans. The Panel concludes that no Average......Following a request from the European Commission, the Panel on Dietetic Products, Nutrition and Allergies (NDA) considered the evidence for setting Dietary Reference Values for chromium. Trivalent chromium (Cr(III)) has been postulated to be necessary for the efficacy of insulin in regulating...... models have not produced consistent results, and that there is no evidence of essentiality of Cr(III) in animal nutrition. Evaluating the possibility of Cr(III) as an essential element for humans, the evidence from reported improvements associated with chromium supplementation in patients on total...

Continuity between DSM-5 Categorical Criteria and Traits Criteria for Borderline Personality Disorder.

Science.gov (United States)

Bach, Bo; Sellbom, Martin

2016-08-01

Borderline personality disorder (BPD) includes a heterogeneous constellation of symptoms operationalized with 9 categorical criteria. As the field of personality disorder (PD) research moves to emphasize dimensional traits in its operationalization, it is important to delineate continuity between the 9 DSM-IV/Diagnostic and Statistical Manual of Mental Disorders, Fifth Edition (DSM-5) categorical criteria for BPD and the trait dimensions in DSM-5 Section III. To date, no study has attempted such validation. We examined the associations between the 9 categorical DSM-IV/DSM-5 criteria for BPD and the trait dimensions of the alternative DSM-5 model for PDs in consecutively recruited psychiatric outpatients (N = 142; 68% female; age: mean 29.02, SD 8.38). This was investigated by means of bivariate correlations, followed by multiple logistic regression analysis. The categorical BPD criteria were associated with conceptually related DSM-5 Section III traits (P > 0.001), except for the criterion of chronic feelings of emptiness. Consistent with the proposed traits criteria for BPD in DSM-5 Section III, we found Emotional lability, Anxiousness, Separation insecurity, Depressivity, Impulsivity, Risk taking, and Hostility to capture conceptually coherent BPD categorical criteria, while Suspiciousness was also strongly associated with BPD criteria. At the domain level, this applied to Negative affectivity, Disinhibition, and Psychoticism. Notably, Emotional lability, Impulsivity, and Suspiciousness emerged as unique predictors of BPD (P > 0.05). In addition to the proposed BPD traits criteria, Suspiciousness and features of Psychoticism also augment BPD features. Provided that these findings are replicated in forthcoming research, a modified traits operationalization of BPD is warranted. © The Author(s) 2016.

Prevalence of the Metabolic Syndrome in Renal Transplant Recipients

African Journals Online (AJOL)

Prevalence of the Metabolic Syndrome in Renal Transplant Recipients. ... Cholesterol Education Program Adult Treatment Panel III (NCEP-ATP III) criteria and the International Diabetes Federation (IDF) criteria. ... Results: By using the NCEP-ATP III criteria 26 out of 91 patients (28.6%) had the metabolic syndrome. MS was ...

75 FR 61509 - Notice of Issuance of Final Determination Concerning Solar Photovoltaic Panel Systems

Science.gov (United States)

2010-10-05

... Determination Concerning Solar Photovoltaic Panel Systems AGENCY: U.S. Customs and Border Protection, Department... Procurement; Title III, Trade Agreements Act of 1979; Country of Origin of solar photovoltaic panel system... solar photovoltaic (``PV'') panel systems contain both U.S. and foreign-origin raw materials and...

46 CFR 385.51 - Criteria: Projects.

Science.gov (United States)

2010-10-01

... results; (iii) The extent of the problems treated and whether the objectives sought by the undertaking are... MARITIME ADMINISTRATION, DEPARTMENT OF TRANSPORTATION MISCELLANEOUS RESEARCH AND DEVELOPMENT GRANT AND COOPERATIVE AGREEMENTS REGULATIONS Criteria for Award § 385.51 Criteria: Projects. The criteria to be used by...

The Clinical Features of Paranoia in the 20th Century and Their Representation in Diagnostic Criteria From DSM-III Through DSM-5

Science.gov (United States)

2017-01-01

Abstract This review traces, through psychiatric textbooks, the history of the Kraepelinian concept of paranoia in the 20th century and then relates the common reported symptoms and signs to the diagnostic criteria for paranoia/delusional disorder in DSM-III through DSM-5. Clinical descriptions of paranoia appearing in 10 textbooks, published 1899 to 1970, revealed 11 prominent symptoms and signs reported by 5 or more authors. Three symptoms (systematized delusions, minimal hallucinations, and prominent ideas of reference) and 2 signs (chronic course and minimal affective deterioration) were reported by 8 or 9 of the authors. Four textbook authors rejected the Kraepelinian concept of paranoia. A weak relationship was seen between the frequency with which the clinical features were reported and the likelihood of their inclusion in modern DSM manuals. Indeed, the diagnostic criteria for paranoia/delusional disorder shifted substantially from DSM-III to DSM-5. The modern operationalized criteria for paranoia/delusional disorder do not well reflect the symptoms and signs frequently reported by historical experts. In contrast to results of similar reviews for depression, schizophrenia and mania, the clinical construct of paranoia/delusional disorder has been somewhat unstable in Western Psychiatry since the turn of the 20th century as reflected in both textbooks and the DSM editions. PMID:28003468

Fermilab III

Energy Technology Data Exchange (ETDEWEB)

Anon.

1990-09-15

The total ongoing plans for Fermilab are wrapped up in the Fermilab III scheme, centrepiece of which is the proposal for a new Main Injector. The Laboratory has been awarded a $200,000 Illinois grant which will be used to initiate environmental assessment and engineering design of the Main Injector, while a state review panel recommended that the project should also benefit from $2 million of funding.

Fermilab III

International Nuclear Information System (INIS)

Anon.

1990-01-01

The total ongoing plans for Fermilab are wrapped up in the Fermilab III scheme, centrepiece of which is the proposal for a new Main Injector. The Laboratory has been awarded a $200,000 Illinois grant which will be used to initiate environmental assessment and engineering design of the Main Injector, while a state review panel recommended that the project should also benefit from $2 million of funding

Association between Cigarette Smoking and Metabolic Syndrome in ...

African Journals Online (AJOL)

Purpose: To investigate the relationship between metabolic syndrome as defined by using the modified NCEP/ATP III criteria [modified the National Cholesterol Education Program (NCEP)/Adult Treatment Panel III (ATP III) criteria] and cigarette smoking in Thai subjects. Methods: This study was carried out among 254 ...

Advanced conversion technology review panel report

International Nuclear Information System (INIS)

Frazier, T.A.

1998-01-01

The Department of Energy (DOE), the National Aeronautics and Space Administration (NASA) and the Jet Propulsion Laboratory (JPL) established a DOE lead management team and an Advanced Conversion Technology Review Panel. The panel was tasked with providing the management team with an assessment and ranking of the three advanced conversion technologies. The three advanced conversion technologies were alkali metal thermal to electric converter (AMTEC), Stirling engine converter (SEC), and thermophotovoltaic (TPV). To rate and rank these three technologies, five criteria were developed: (1) Performance, (2) Development and Cost/Production and Cost/Schedule Risk, (3) Spacecraft Interface and Operations, (4) Ability to Scale Conversion, and (5) Safety. Discussed are the relative importance of each of these criteria and the rankings of the three advanced conversion technologies. It was the conclusion of the panel that the technology decision should be based on the risk that DOE and NASA are willing to accept. SEC is the most mature technology and would provide the lowest risk option. However, if more risk is acceptable, AMTEC not only provides benefits in the spacecraft interface but is also predicted to outperform the SEC. It was proposed that if AMTEC were selected, funding should be provided at a reasonable level to support back-up technology to be developed in a parallel fashion until AMTEC has proven its capability. The panel report and conclusion were provided to DOE in February 1997

Developing priority criteria for magnetic resonance imaging: results from the Western Canada Waiting List project

International Nuclear Information System (INIS)

Hadorn, D.C.

2002-01-01

The Western Canada Waiting List (WCWL) Project is a federally funded partnership of 19 organizations, including medical associations, health authorities, ministries of health and research organizations, that was created to develop tools to assist in assessing the relative urgency and priority of patients on waiting lists. The WCWL panel on magnetic resonance imaging (MRI) was 1 of 5 panels constituted under this project. The panel developed and tested a set of standardized clinical criteria for setting priorities among patients awaiting MRI. The criteria were applied to 407 patients in the 4 western provinces. Regression analysis was used to determine the set of criteria weights that collectively best predicted clinicians' overall ratings of patients' urgency for MRI. Reliability was assessed using clinicians' ratings of 6 hypothetical paper cases. The resulting weighted criteria accounted for about two-fifths of the observed variance in overall urgency ratings (R 2 = 39.9%). The panel then modified the criteria on the basis of regression results and clinical judgment. Most of the revised criteria items showed poor inter-rater reliability, but test-retest reliability (over a 2-month interval) was relatively good. Criteria items requiring probability judgments were a challenge for clinicians. Further development and testing of the tool appears warranted, although considerable question remains concerning the utility of priority criteria for MRI and other diagnostic services. (author)

ACR Appropriateness Criteria on Resectable Rectal Cancer

International Nuclear Information System (INIS)

Suh, W. Warren; Blackstock, A. William; Herman, Joseph; Konski, Andre A.; Mohiuddin, Mohammed; Poggi, Matthew M.; Regine, William F.; Cosman, Bard C.; Saltz, Leonard; Johnstone, Peter A.S.

2008-01-01

The American College of Radiology (ACR) Appropriateness Criteria on Resectable Rectal Cancer was updated by the Expert Panel on Radiation Oncology-Rectal/Anal Cancer, based on a literature review completed in 2007

A Hybrid Multiple Criteria Group Decision-Making Approach for Green Supplier Selection in the TFT-LCD Industry

Directory of Open Access Journals (Sweden)

Che-Wei Tsui

2014-01-01

Full Text Available The awareness of the need for environmental protection is increasing throughout the world. The focuses of green supplier selection are on considering environmental criteria and strengthening the competitiveness of the entire supply chain. The purpose of this study is to develop a green supplier selection procedure for the thin film transistor liquid crystal display (TFT-LCD industry using polarizer suppliers as an example. First, a decision framework for green supplier selection is developed based on literatures and the supplier audit forms provided by an anonymous flat panel display manufacturer in Taiwan. Then, a hybrid multiple criteria group decision-making (MCGDM method is proposed based on analytic hierarchy process (AHP, entropy, elimination and choice expressing the reality III (ELECTRE III, and the linear assignment method to assist the manufacturer in choosing among four polarizer suppliers. The final ranking results for green supplier selection and different opinions from each department are provided. An improvement report is suggested to enhance suppliers’ performance. For the evaluation procedure, most managers emphasize the importance of current capability and the capability of research and development. Furthermore, we found that the subsidiary supplier should improve quality control competence immediately to be considered as the potential candidate of primary supplier.

National Treatment under GATT Article III: 2 and its Applicability in the Context of Korea's FTAs

Directory of Open Access Journals (Sweden)

Sherzod Shadikhodjaev

2008-06-01

Full Text Available GATT Article III: 2 on national treatment on internal taxation is an integral part of Korea's FTAs. Therefore, GATT/WTO case law provides useful guidance on proper application of this provision in the FTA context. Article III:2 involves a multi-tiered test of several issues including likeness, discriminatory threshold, and protective application of a tax measure. When the FTA parties enter into a dispute over national treatment, the problem of applicable law may arise. First, FTA panels are not obliged to rely on GATT/WTO jurisprudence. Nevertheless, given the incorporation of GATT Article III into the FTA, it is suggested that FTA panels follow WTO case law to secure consistent and predictable applGATT Article III: 2 on national treatment on internal taxation is an integral part of Korea's FTAs. Therefore, GATT/WTO case law provides useful guidance on proper application of this provision in the FTA context. Article III:2 involves a multi-tiered test of several issues including likeness, discriminatory threshold, and protective application of a tax measure. When the FTA parties enter into a dispute over national treatment, the problem of applicable law may arise. First, FTA panels are not obliged to rely on GATT/WTO jurisprudence. Nevertheless, given the incorporation of GATT Article III into the FTA, it is suggested that FTA panels follow WTO case law to secure consistent and predictable application of the national treatment rule. Second, it is questionable whether WTO panels can examine claims under the GATT-plus provisions on national treatment contained in the FTA. In order to avoid possible jurisprudential difficulties, disputing parties may choose to refer the matter to an FTA panel, instead of launching a WTO dispute settlement procedure. Alternatively, the parties may agree, pursuant to DSU Article 7.3, on non-standard terms of reference of the panel where a GATT-plus provision is explicitly listed. In both scenarios, the GATT

A multi-criteria decision analysis assessment of waste paper management options.

Science.gov (United States)

Hanan, Deirdre; Burnley, Stephen; Cooke, David

2013-03-01

The use of Multi-criteria Decision Analysis (MCDA) was investigated in an exercise using a panel of local residents and stakeholders to assess the options for managing waste paper on the Isle of Wight. Seven recycling, recovery and disposal options were considered by the panel who evaluated each option against seven environmental, financial and social criteria. The panel preferred options where the waste was managed on the island with gasification and recycling achieving the highest scores. Exporting the waste to the English mainland for incineration or landfill proved to be the least preferred options. This research has demonstrated that MCDA is an effective way of involving community groups in waste management decision making. Copyright © 2012 Elsevier Ltd. All rights reserved.

Report of the DOE panel on low activation materials for fusion applications

International Nuclear Information System (INIS)

Conn, R.W.

1983-06-01

In February, 1982, the Office of Fusion Energy, DOE, through its Division of Development and Technology, established a Panel to examine materials with attractive radioactivation characteristics for applications in fusion power reactors. Since February, the Panel has met together and in subgroups numerous times. Input from knowledgeable people was elicited via a two day workshop held at UCLA in April, 1982. The agenda, titles of talks, and speakers are given in Appendix II. We present here a synopsis of the Panel's findings based upon both external information provided to us and upon the work and deliberations of the Panel itself. Conclusions and recommendations follow. Background technical information brought together by the Panel is relegated to Appendices III and IV

The Clinical Features of Paranoia in the 20th Century and Their Representation in Diagnostic Criteria From DSM-III Through DSM-5.

Science.gov (United States)

Kendler, Kenneth S

2017-03-01

This review traces, through psychiatric textbooks, the history of the Kraepelinian concept of paranoia in the 20th century and then relates the common reported symptoms and signs to the diagnostic criteria for paranoia/delusional disorder in DSM-III through DSM-5. Clinical descriptions of paranoia appearing in 10 textbooks, published 1899 to 1970, revealed 11 prominent symptoms and signs reported by 5 or more authors. Three symptoms (systematized delusions, minimal hallucinations, and prominent ideas of reference) and 2 signs (chronic course and minimal affective deterioration) were reported by 8 or 9 of the authors. Four textbook authors rejected the Kraepelinian concept of paranoia. A weak relationship was seen between the frequency with which the clinical features were reported and the likelihood of their inclusion in modern DSM manuals. Indeed, the diagnostic criteria for paranoia/delusional disorder shifted substantially from DSM-III to DSM-5. The modern operationalized criteria for paranoia/delusional disorder do not well reflect the symptoms and signs frequently reported by historical experts. In contrast to results of similar reviews for depression, schizophrenia and mania, the clinical construct of paranoia/delusional disorder has been somewhat unstable in Western Psychiatry since the turn of the 20th century as reflected in both textbooks and the DSM editions. © The Author 2017. Published by Oxford University Press on behalf of the Maryland Psychiatric Research Center. All rights reserved. For permissions, please email: journals.permissions@oup.com.

Panel 1: Safety design criteria

International Nuclear Information System (INIS)

Yllera, Javier

2013-01-01

There is general consensus in the nuclear community, and more after the Fukushima accident, that the deployment of nuclear energy has to be done at the highest levels of nuclear safety and that safety cannot be compromised by other factors. It is well understood that reactors that are being licensed and the new generations of reactors that will be constructed in the future will need to reach higher safety levels than the existing ones. Several countries and international organizations or international groups are launching initiatives to harmonise safety goals, safety requirements, safety objectives, regulations, criteria or safety reference levels. There are differences in the meanings of these terms and the working approaches, but the overall purpose is the same: to specify how new plants can be safer. In this context, the IAEA has an statutory function for developing international nuclear safety standards. The IAEA safety standards are per se not mandatory for IAEA Member States. Regulating safety is a national responsibility, and many States have decided to adopt the IAEA’s standards for use in their national regulations in different ways. The IAEA Safety Standards represent international consensus on what must constitute a high level of safety for nuclear installations. In the area of NPP design, IAEA safety standards that are published are intended to apply primarily to new plants. It might not be practicable to apply all the requirements to plants that are already in operation. In addition, the focus is primarily on plants with water cooled reactors

Molecular Diagnostics of Gliomas Using Next Generation Sequencing of a Glioma-Tailored Gene Panel.

Science.gov (United States)

Zacher, Angela; Kaulich, Kerstin; Stepanow, Stefanie; Wolter, Marietta; Köhrer, Karl; Felsberg, Jörg; Malzkorn, Bastian; Reifenberger, Guido

2017-03-01

Current classification of gliomas is based on histological criteria according to the World Health Organization (WHO) classification of tumors of the central nervous system. Over the past years, characteristic genetic profiles have been identified in various glioma types. These can refine tumor diagnostics and provide important prognostic and predictive information. We report on the establishment and validation of gene panel next generation sequencing (NGS) for the molecular diagnostics of gliomas. We designed a glioma-tailored gene panel covering 660 amplicons derived from 20 genes frequently aberrant in different glioma types. Sensitivity and specificity of glioma gene panel NGS for detection of DNA sequence variants and copy number changes were validated by single gene analyses. NGS-based mutation detection was optimized for application on formalin-fixed paraffin-embedded tissue specimens including small stereotactic biopsy samples. NGS data obtained in a retrospective analysis of 121 gliomas allowed for their molecular classification into distinct biological groups, including (i) isocitrate dehydrogenase gene (IDH) 1 or 2 mutant astrocytic gliomas with frequent α-thalassemia/mental retardation syndrome X-linked (ATRX) and tumor protein p53 (TP53) gene mutations, (ii) IDH mutant oligodendroglial tumors with 1p/19q codeletion, telomerase reverse transcriptase (TERT) promoter mutation and frequent Drosophila homolog of capicua (CIC) gene mutation, as well as (iii) IDH wildtype glioblastomas with frequent TERT promoter mutation, phosphatase and tensin homolog (PTEN) mutation and/or epidermal growth factor receptor (EGFR) amplification. Oligoastrocytic gliomas were genetically assigned to either of these groups. Our findings implicate gene panel NGS as a promising diagnostic technique that may facilitate integrated histological and molecular glioma classification. © 2016 International Society of Neuropathology.

78 FR 72612 - Criteria for the Certification and Recertification of the Waste Isolation Pilot Plant's...

Science.gov (United States)

2013-12-03

... of the shaft seals. The parameters used to represent the changes in performance assessment were... panel are filled with waste, the DOE intends to seal the drifts with engineered structures called panel... seal these drifts with engineered structures called panel closures. 40 CFR part 194, Criteria for the...

High temperature structural sandwich panels

Science.gov (United States)

Papakonstantinou, Christos G.

High strength composites are being used for making lightweight structural panels that are being employed in aerospace, naval and automotive structures. Recently, there is renewed interest in use of these panels. The major problem of most commercial available sandwich panels is the fire resistance. A recently developed inorganic matrix is investigated for use in cases where fire and high temperature resistance are necessary. The focus of this dissertation is the development of a fireproof composite structural system. Sandwich panels made with polysialate matrices have an excellent potential for use in applications where exposure to high temperatures or fire is a concern. Commercial available sandwich panels will soften and lose nearly all of their compressive strength temperatures lower than 400°C. This dissertation consists of the state of the art, the experimental investigation and the analytical modeling. The state of the art covers the performance of existing high temperature composites, sandwich panels and reinforced concrete beams strengthened with Fiber Reinforced Polymers (FRP). The experimental part consists of four major components: (i) Development of a fireproof syntactic foam with maximum specific strength, (ii) Development of a lightweight syntactic foam based on polystyrene spheres, (iii) Development of the composite system for the skins. The variables are the skin thickness, modulus of elasticity of skin and high temperature resistance, and (iv) Experimental evaluation of the flexural behavior of sandwich panels. Analytical modeling consists of a model for the flexural behavior of lightweight sandwich panels, and a model for deflection calculations of reinforced concrete beams strengthened with FRP subjected to fatigue loading. The experimental and analytical results show that sandwich panels made with polysialate matrices and ceramic spheres do not lose their load bearing capability during severe fire exposure, where temperatures reach several

Sensitivity analysis on ultimate strength of aluminium stiffened panels

DEFF Research Database (Denmark)

Rigo, P.; Sarghiuta, R.; Estefen, S.

2003-01-01

This paper presents the results of an extensive sensitivity analysis carried out by the Committee III.1 "Ultimate Strength" of ISSC?2003 in the framework of a benchmark on the ultimate strength of aluminium stiffened panels. Previously, different benchmarks were presented by ISSC committees on ul...

DSM disorders and their criteria: how should they inter-relate?

Science.gov (United States)

Kendler, K S

2017-09-01

While the changes in psychiatric diagnosis introduced by Diagnostic and Statistical Manual third edition (DSM-III) have had major benefits to the field of psychiatry, the reification of its diagnostic criteria and the widespread adoption of diagnostic literalism have been problematic. I argue that, at root, these developments can be best understood by contrasting two approaches to the relationship between DSM disorders and their criteria. In a constitutive relationship, criteria definitively define the disorder. Having a disorder is nothing more than meeting the criteria. In an indexical relationship, the criteria are fallible indices of a disorder understood as a hypothetical, tentative diagnostic construct. I trace the origins of the constitutive model to the philosophical theory of operationalism. I then examine a range of historical and empirical results that favor the indexical over the constitutive position including (i) evidence that individual criteria for DSM-III were selected from a broader pool of possible symptoms/signs, (ii) revisions of DSM have implicitly assumed an indexical criteria-disorder relationship, (iii) the indexical position allows DSM criteria to be wrong and misdiagnose patients while such a result is incoherent for a constitutive model, an implausible position, (iv) we assume an indexical criteria-scale relationships for many personality and symptom measures commonly used in psychiatric practice and research, and (v) empirical studies suggesting similar performance for DSM and non-DSM symptoms for major depression. I then review four reasons for the rise of the constitutive position: (i) the 'official' nature of the DSM criteria, (ii) the strong investment psychiatry has had in the DSM manual and its widespread use and success, iii) lack of a clear pathophysiology for our disorders, and (iv) the absence of informative diagnostic signs of minimal clinical importance. I conclude that the constitutive position is premature and reflects a

Journey in guidelines for lipid management: From adult treatment panel (ATP-I to ATP-III and what to expect in ATP-IV

Directory of Open Access Journals (Sweden)

P G Talwalkar

2013-01-01

Full Text Available Adult Treatment Panel (ATP, an expert panel to supervise cholesterol management was set up under the aegis of National Cholesterol Education Program (NCEP in 1985. Since then NCEP-ATP has been revising and framing guidelines to enable clinician to deliver better treatment to cardiovascular patients and to educate general people. As a result, considerable reduction in cardiovascular related deaths has been observed in recent times. All three ATP guidelines viz. ATP-I, ATP-II and ATP-III have targeted low density lipoprotein as their primary goal. The ATP-III guideline was updated in the light of evidences from 5-major clinical trials and was released in 2004. It added therapeutic lifestyle changes, concept of risk equivalents, Framingham CHD-risk score non-high density lipoprotein cholesterol (non-HDL-C as secondary target and gave strong emphasis on metabolic risk factors. The earlier treat-to-target paradigm faced fierce criticism from clinicians across the globe because of insufficient proof of safety and benefits of treating patients with respect to an individual′s low density lipoprotein (LDL level. Further, demonstration of non-HDL-C and total cholesterol/HDL-C ratio as strong predictors of overall cardiovascular risk foresees new guidelines. A tailored-treatment approach was suggested instead of LDL-C target based treatment approach which was soundly based on direct clinical trials evidences and proposes treatment based on individual′s overall 5- to 10-year cardiovascular risk irrespective of LDL-C level, leading to lower number of people on high dose/s of statins. Recent report of the Cholesterol Treatment Trialist′s Collaborators meta-analysis strongly supported primary prevention of LDL with statins in low risk individuals and showed that its benefits completely outweighed its known hazards. Markers other than LDL-C like apolipoprotein B, non-HDL-C and total cholesterol/HDL-C ratio would take precedence in the risk assessment and

The Prevalence and Symptoms Characteristic of Functional Constipation Using Rome III Diagnostic Criteria among Tertiary Education Students.

Directory of Open Access Journals (Sweden)

Ying Jye Lim

Full Text Available Functional constipation is very common with heterogeneous symptoms that have substantial impact on patient quality of life as well as medical resources which are rarely reported as life-threatening. The aim of this study is to examine the prevalence and symptoms characteristic of functional constipation (FC by using Rome III diagnostic criteria among tertiary education students with an intention to introduce treatment in the future.Demographic, socio-economics characteristics and symptoms of FC using the Rome III criteria were sought using a questionnaire administered to Malaysian students in a tertiary education setting. Other data obtained were the general health status, lifestyle factors and anthropometric measurements. Using a simple random sampling method, a total of 1662 students were recruited in the study with a response rate of 95.0%. Sampled data are presented as frequency and percentage and stratified accordingly into categories for Chi-square analysis.The prevalence of functional constipation among the students was 16.2%, with a significantly higher prevalence among women (17.4% than men (12.5%. Hard or lumpy stool, incomplete evacuation, anorectal obstruction and straining were reported as the commonest symptoms experienced. Type 3 was the most frequent stool consistency experienced among the constipated individuals (35.2%. Only 4.4% of individuals reported having less than three defecations per week. Using univariable analysis, FC was significantly associated with sex (odds ratio: 1.48, 95% CI: 1.06-2.06 and age group (odds ratio: 1.34, 95% CI: 1.01-1.79 with P value < 0.05 significance level. In multivariate logistic regression analysis, only sex was found significantly associated with FC (adjusted odds ratio: 1.53, 95% CI: 1.08-2.17, P < 0.05.Based on the prevalence rate, constipation is a common problem among tertiary education students (16.2%, with significantly more prevalence among the female respondents. Early detection of

STOPP/START criteria for potentially inappropriate prescribing in older people: version 2.

Science.gov (United States)

O'Mahony, Denis; O'Sullivan, David; Byrne, Stephen; O'Connor, Marie Noelle; Ryan, Cristin; Gallagher, Paul

2015-03-01

Screening tool of older people's prescriptions (STOPP) and screening tool to alert to right treatment (START) criteria were first published in 2008. Due to an expanding therapeutics evidence base, updating of the criteria was required. We reviewed the 2008 STOPP/START criteria to add new evidence-based criteria and remove any obsolete criteria. A thorough literature review was performed to reassess the evidence base of the 2008 criteria and the proposed new criteria. Nineteen experts from 13 European countries reviewed a new draft of STOPP & START criteria including proposed new criteria. These experts were also asked to propose additional criteria they considered important to include in the revised STOPP & START criteria and to highlight any criteria from the 2008 list they considered less important or lacking an evidence base. The revised list of criteria was then validated using the Delphi consensus methodology. The expert panel agreed a final list of 114 criteria after two Delphi validation rounds, i.e. 80 STOPP criteria and 34 START criteria. This represents an overall 31% increase in STOPP/START criteria compared with version 1. Several new STOPP categories were created in version 2, namely antiplatelet/anticoagulant drugs, drugs affecting, or affected by, renal function and drugs that increase anticholinergic burden; new START categories include urogenital system drugs, analgesics and vaccines. STOPP/START version 2 criteria have been expanded and updated for the purpose of minimizing inappropriate prescribing in older people. These criteria are based on an up-to-date literature review and consensus validation among a European panel of experts. © The Author 2014. Published by Oxford University Press on behalf of the British Geriatrics Society.

Fracture Analysis of the FAA/NASA Wide Stiffened Panels

Science.gov (United States)

Seshadri, B. R.; Newman, J. C., Jr.; Dawicke, D. S.; Young, R. D.

1999-01-01

This paper presents the fracture analyses conducted on the FAA/NASA stiffened and unstiffened panels using the STAGS (STructural Analysis of General Shells) code with the critical crack-tip-opening angle (CTOA) fracture criterion. The STAGS code with the "plane-strain" core option was used in all analyses. Previous analyses of wide, flat panels have shown that the high-constraint conditions around a crack front, like plane strain, has to be modeled in order for the critical CTOA fracture criterion to predict wide panel failures from small laboratory tests. In the present study, the critical CTOA value was determined from a wide (unstiffened) panel with anti-buckling guides. The plane-strain core size was estimated from previous fracture analyses and was equal to about the sheet thickness. Rivet flexibility and stiffener failure was based on methods and criteria, like that currently used in industry. STAGS and the CTOA criterion were used to predict load-against-crack extension for the wide panels with a single crack and multiple-site damage cracking at many adjacent rivet holes. Analyses were able to predict stable crack growth and residual strength within a few percent (5%) of stiffened panel tests results but over predicted the buckling failure load on an unstiffened panel with a single crack by 10%.

Optimization of composite sandwich cover panels subjected to compressive loadings

Science.gov (United States)

Cruz, Juan R.

1991-01-01

An analysis and design method is presented for the design of composite sandwich cover panels that include the transverse shear effects and damage tolerance considerations. This method is incorporated into a sandwich optimization computer program entitled SANDOP. As a demonstration of its capabilities, SANDOP is used in the present study to design optimized composite sandwich cover panels for for transport aircraft wing applications. The results of this design study indicate that optimized composite sandwich cover panels have approximately the same structural efficiency as stiffened composite cover panels designed to satisfy individual constraints. The results also indicate that inplane stiffness requirements have a large effect on the weight of these composite sandwich cover panels at higher load levels. Increasing the maximum allowable strain and the upper percentage limit of the 0 degree and +/- 45 degree plies can yield significant weight savings. The results show that the structural efficiency of these optimized composite sandwich cover panels is relatively insensitive to changes in core density. Thus, core density should be chosen by criteria other than minimum weight (e.g., damage tolerance, ease of manufacture, etc.).

The effect of increasingly stringent diagnostic criteria on sex ...

African Journals Online (AJOL)

The male/female ratio rose from 1.6 among those meeting the CATEGO 'broad' criteria for schizophrenia to 3.7 among those satisfying DSM-III criteria. Of 76 women meeting the former criteria, 53 were excluded by the latter, the majority rediagnosed as affective or schizo-affective psychosis. Consequently, although women ...

40 CFR 146.4 - Criteria for exempted aquifers.

Science.gov (United States)

2010-07-01

... (CONTINUED) UNDERGROUND INJECTION CONTROL PROGRAM: CRITERIA AND STANDARDS General Provisions § 146.4 Criteria... of a permit application for a Class II or III operation to contain minerals or hydrocarbons that... public water system. (Clean Water Act, Safe Drinking Water Act, Clean Air Act, Resource Conservation and...

Mechanical and physical properties of LVL panels made from three amazonic species

Directory of Open Access Journals (Sweden)

Nerci Nina Lima

2013-09-01

Full Text Available This work aimed to evaluate the physical-mechanical performance of laminated veneer lumber (LV produced with different compositions of tropical Amazonian species and Pinus oocarpa. Three tropical species were used: Cordia goeldiana Huber. (Freijó, Parkia gigantocarpa Ducke (Faveira and Brosimum parinarioides Ducke (Amapá doce. For comparison, Pinus oocarpa wood obtained from an experimental stand was used. Three types of veneer combination were evaluated: (i one species; (ii the three Amazonian species combination and (iii combination of Amazonian species with Pinus oocarpa. The acoustic propagation velocity was also evaluated with the stress wave timer for correlation between dynamic modulus of elasticity (MOEd and static modulus of elasticity (MOEs of the panel. Panels produced with Amazonian species presented lower water absorption than Pinus oocarpa panels. Regarding the mechanical properties, the lowest strength was verified for "faveira" panels. There was no statistical difference among panels in glue line shear strength. The stress wave timer could be used for prediction of MOEs by using MOEd.

European gene mapping project (EUROGEM) : Breakpoint panels for human chromosomes based on the CEPH reference families

NARCIS (Netherlands)

Attwood, J; Bryant, SP; Bains, R; Povey, R; Povey, S; Rebello, M; Kapsetaki, M; Moschonas, NK; Grzeschik, KH; Otto, M; Dixon, M; Sudworth, HE; Kooy, RF; Wright, A; Teague, P; Terrenato, L; Vergnaud, G; Monfouilloux, S; Weissenbach, J; Alibert, O; Dib, C; Faure, S; Bakker, E; Pearson, NM; Vossen, RHAM; Gal, A; MuellerMyhsok, B; Cann, HM; Spurr, NK

Meiotic breakpoint panels for human chromosomes 2, 3, 4, 5, 6, 7, 8, 9, 10, 13, 14, 15, 17; 18, 20 and X were constructed from genotypes from the CEPH reference families. Each recombinant chromosome included has a breakpoint well-supported with reference to defined quantitative criteria. The panels

The effect of sampling, diagnostic criteria and assessment procedures on the observed prevalence of DSM-III-R personality disorders among treated alcoholics.

Science.gov (United States)

Verheul, R; Hartgers, C; Van den Brink, W; Koeter, M W

1998-03-01

OBJECTIVE. In a recent review of empirical studies on the prevalence of DSM-III-R personality disorders among substance abusers, wide ranges of prevalence rates for overall Axis II, antisocial personality disorder (APD) and borderline personality disorder (BPD) were shown. Utilizing subsamples from within a single study population, the current report explores the effect of sampling, diagnostic criteria and assessment procedures on the observed prevalence of DSM-III-R personality disorders among treated alcoholics. Personality disorders were assessed with the Personality Diagnostic Questionnaire Revised (PDQR) at two times of measurement (Time 1 n = 459; Time 2 n = 90). In addition, APD was measured with the Composite International Diagnostic Interview (CIDI; n = 587). Finally, an unselected subgroup (n = 136) was interviewed with the International Personality Disorder Examination (IPDE). There were few differences between inpatients or outpatients or between males and females. Using the IPDE, the exclusion of substance-related pathology did not affect the prevalence estimate. However, the prevalence rates according to the PDQR varied greatly across age groups. In a representative subsample (n = 109), the prevalence rates also varied greatly across assessment methods (PDQR, 52% vs IPDE, 31%). The prevalence estimate of APD according to the CIDI was related to setting, gender, age group and the applied time-frame. These findings indicate the examined factors to be necessary qualifiers of prevalence estimates and, consequently, support the use of a multiple-criteria/multimethod assessment battery in research as well as in clinical work.

[Revision of McDonald's new diagnostic criteria for multiple sclerosis].

Science.gov (United States)

Wiendl, H; Kieseier, B C; Gold, R; Hohlfeld, R; Bendszus, M; Hartung, H-P

2006-10-01

In 2001, an international panel suggested new diagnostic criteria for multiple sclerosis (MS). These criteria integrate clinical, imaging (MRI), and paraclinical results in order to facilitate diagnosis. Since then, these so-called McDonald criteria have been broadly accepted and widely propagated. In the meantime a number of publications have dealt with the sensitivity and specificity for MS diagnosis and with implementing these new criteria in clinical practice. Based on these empirical values and newer data on MS, an international expert group recently proposed a revision of the criteria. Substantial changes affect (1) MRI criteria for the dissemination of lesions over time, (2) the role of spinal cord lesions in the MRI and (3) diagnosis of primary progressive MS. In this article we present recent experiences with the McDonald and revised criteria.

Investigation of the Stress Intensity Limits of ASME Section III Div.5 for Structure Design Criteria of SFR Fuel Assembly

Energy Technology Data Exchange (ETDEWEB)

Choo, Jin-Yup; Kim, Hyung-Kyu; Cheon, Jin-Sik [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2016-10-15

These affect the mechanical design of the fuel assembly components. And thus, appropriate structural design criteria should also be chosen to incorporate the specific design conditions of the SFR fuel assemblies. Among them, the temperature is one of the most crucial conditions to be concerned because the sodium coolant temperature is normally more than 500ºC which is much higher than that of the LWR (< 350ºC). This implies that a thermal creep should be significantly considered in the SFR fuel assembly mechanical design. In addition to the high temperature condition, an irradiation swelling is also an important behavior that the SFR fuel assembly material should accommodate. To incorporate the temperature and irradiation impacts, the material of the fuel assembly components is presently determined to be made of HT-9, the ferriticmartensitic steel. In this paper, the ASME Sec. III Div. 5 (referred to as ‘Div. 5’ hereinafter), which was developed for a ‘high temperature reactor’, is considered as one of the structural design criteria for the mechanical design of SFR fuel assemblies. In this paper, the stress intensity limits, S{sub m} and S{sub t} of HT-9 were built for the structural criteria of an SFR fuel assembly. S{sub m} is obtained from the ultimate strength. As for S{sub t}, it is more complicated because of its dependency of time duration in addition to temperature. Following the definition of S{sub mt}, the method in the ASME Sec. III Div. 1, Subsec. NH was consulted. We found that the Sm is adopted as S{sub mt} under the temperature about 470ºC which is relatively low temperature range and over 470ºC with relatively short time duration as 1000 hours. And the S{sub t} is adopted as Smt at over 470ºC and long time duration over 34800 hours, and over 520ºC and 10{sup 4} hours too. And at over 570ºC and 1000 hours, and at over 630ºC and 100 hours, S{sub t} is also adopted for S{sub mt}.

Improving Hybrid III injury assessment in steering wheel rim to chest impacts using responses from finite element Hybrid III and human body model.

Science.gov (United States)

Holmqvist, Kristian; Davidsson, Johan; Mendoza-Vazquez, Manuel; Rundberget, Peter; Svensson, Mats Y; Thorn, Stefan; Törnvall, Fredrik

2014-01-01

The main aim of this study was to improve the quality of injury risk assessments in steering wheel rim to chest impacts when using the Hybrid III crash test dummy in frontal heavy goods vehicle (HGV) collision tests. Correction factors for chest injury criteria were calculated as the model chest injury parameter ratios between finite element (FE) Hybrid III, evaluated in relevant load cases, and the Total Human Model for Safety (THUMS). This is proposed to be used to compensate Hybrid III measurements in crash tests where steering wheel rim to chest impacts occur. The study was conducted in an FE environment using an FE-Hybrid III model and the THUMS. Two impactor shapes were used, a circular hub and a long, thin horizontal bar. Chest impacts at velocities ranging from 3.0 to 6.0 m/s were simulated at 3 impact height levels. A ratio between FE-Hybrid III and THUMS chest injury parameters, maximum chest compression C max, and maximum viscous criterion VC max, were calculated for the different chest impact conditions to form a set of correction factors. The definition of the correction factor is based on the assumption that the response from a circular hub impact to the middle of the chest is well characterized and that injury risk measures are independent of impact height. The current limits for these chest injury criteria were used as a basis to develop correction factors that compensate for the limitations in biofidelity of the Hybrid III in steering wheel rim to chest impacts. The hub and bar impactors produced considerably higher C max and VC max responses in the THUMS compared to the FE-Hybrid III. The correction factor for the responses of the FE-Hybrid III showed that the criteria responses for the bar impactor were consistently overestimated. Ratios based on Hybrid III and THUMS responses provided correction factors for the Hybrid III responses ranging from 0.84 to 0.93. These factors can be used to estimate C max and VC max values when the Hybrid III is

Effects of probiotic type, dose and treatment duration on irritable bowel syndrome diagnosed by Rome III criteria: a meta-analysis.

Science.gov (United States)

Zhang, Yan; Li, Lixiang; Guo, Chuanguo; Mu, Dan; Feng, Bingcheng; Zuo, Xiuli; Li, Yanqing

2016-06-13

Irritable bowel syndrome (IBS) is one of the most common functional gastroenterological diseases, affecting 11.2 % of people worldwide. Previous studies have shown that probiotic treatment may benefit IBS patients. However, the effect of probiotics and the appropriate type, dose, and treatment duration for IBS are still unclear. The aim of the current study was to assess the efficacy of different probiotic types, doses and treatment durations in IBS patients diagnosed by Rome III criteria via a meta-analysis of randomized controlled trials (RCTs). Medline, EMBASE, and the Cochrane Central Register of Controlled Trials up to October 2015 were searched. RCTs including comparisons between the effects of probiotics and placebo on IBS patients diagnosed by Rome III criteria were eligible. Dichotomous data were pooled to obtain the relative risk (RR) with a 95 % confidence interval (CI), whereas continuous data were pooled using a standardized mean difference (SMD) with a 95 % CI. Twenty-one RCTs were included in this meta-analysis. Probiotic therapy was associated with more improvement than placebo administration in overall symptom response (RR: 1.82, 95 % CI 1.27 to 2.60) and quality of life (QoL) (SMD: 0.29, 95 % CI 0.08 to 0.50), but not in individual IBS symptoms. Single probiotics, a low dose, and a short treatment duration were more effective with respect to overall symptom response and QoL. No differences were detected in individual IBS symptoms in the subgroup analyses. Probiotics are an effective pharmacological therapy in IBS patients. Single probiotics at a low dose and with a short treatment duration appear to be more effective in improving overall symptom response and QoL, but more evidence for these effects is still needed.

POPULATION III GAMMA-RAY BURSTS AND BREAKOUT CRITERIA FOR ACCRETION-POWERED JETS

Energy Technology Data Exchange (ETDEWEB)

Nagakura, Hiroki; Suwa, Yudai [Yukawa Institute for Theoretical Physics, Kyoto University, Oiwake-cho, Kitashirakawa, Sakyo-ku, Kyoto 606-8502 (Japan); Ioka, Kunihito, E-mail: hiroki@heap.phys.waseda.ac.jp [KEK Theory Center, 1-1 Oho, Tsukuba 305-0801 (Japan)

2012-08-01

We investigate the propagation of accretion-powered jets in various types of massive stars such as Wolf-Rayet stars, light Population III (Pop III) stars, and massive Pop III stars, all of which are the progenitor candidates of gamma-ray bursts (GRBs). We perform two-dimensional axisymmetric simulations of relativistic hydrodynamics, taking into account both the envelope collapse and the jet propagation (i.e., the negative feedback of the jet on the accretion). Based on our hydrodynamic simulations, we show for the first time that the accretion-powered jet can potentially break out relativistically from the outer layers of Pop III progenitors. In our simulations, the accretion rate is estimated by the mass flux going through the inner boundary, and the jet is injected with a fixed accretion-to-jet conversion efficiency {eta}. By varying the efficiency {eta} and opening angle {theta}{sub op} for more than 40 models, we find that the jet can make a relativistic breakout from all types of progenitors for GRBs if a simple condition {eta} {approx}> 10{sup -4}({theta}{sub op}/8 Degree-Sign ){sup 2} is satisfied, which is consistent with analytical estimates. Otherwise no explosion or some failed spherical explosions occur.

Review of the scientific and technical criteria for the Waste Isolation Pilot Plant (WIPP)

International Nuclear Information System (INIS)

1984-01-01

The panel has evaluated the scientific and technical adequacy of work being done on the Waste Isolation Pilot Plant (WIPP) project to satisfy the charge to the panel set out in Chapter 1. The panel concluded that the scientific work has been carried out with a high degree of professional competence. The panel notes that the geology revealed by shaft sinking and excavation of drifts and the preliminary measurements generally confirm the geologic expectations derived from surface explorations and boreholes. The purity and volume of the salt, the absence of brine pockets at the repository horizon in the areas excavated, the absence of breccia pipes and of toxic gases, and the nearly horizontal bedding of the salt indicate that a repository can be constructed that will meet the geologic criteria for site selection. Thus, the important issues about the geology at the site have been resolved, but there remain some issues about the hydrology and design of the facility that should be resolved before large-scale transuranic (TRU) waste emplacement begins. The panel's conclusions and recommendations regarding the following studies are presented: site selection and characterization; in-situ tests and experiments; waste acceptance criteria; design and construction of underground facilities; and performance assessment. 65 references, 17 figures, 3 tables

Investigation of the Stress Intensity Limits of ASME Section III Div.5 for Structure Design Criteria of SFR Fuel Assembly

International Nuclear Information System (INIS)

Choo, Jin-Yup; Kim, Hyung-Kyu; Cheon, Jin-Sik

2017-01-01

In this paper, the stress intensity limits, Sm and St of HT-9 were built for the structural criteria of an SFR fuel assembly. Sm is obtained from the ultimate strength. As for St, it is more complicated because of its dependency of time duration in addition to temperature. Following the definition of Smt, the method in the ASME Sec. III Div. 1, Subsec. NH was consulted. We found that the Sm is adopted as Smt under the temperature about 470 .deg. C which is relatively low temperature range and over 470 .deg. C with relatively short time duration as 1000 hours. And the St is adopted as Smt at over 470 .deg. C and long time duration over 34800 hours, and over 520 .deg. C and 104 hours too. And at over 570 .deg. C and 1000 hours, and at over 630 .deg. C and 100 hours, St is also adopted for Smt. To use the present result as design criteria, a stringent examination needs to be carried out, because those are calculated from the formulae of HT-9 without an experimental validation. Therefore, an experimental work on the mechanical properties of HT-9 will be necessary.

Evidence for the diagnostic criteria of delirium: an update.

Science.gov (United States)

Blazer, Dan G; van Nieuwenhuizen, Adrienne O

2012-05-01

Since the publication of DSM-III in 1980, the essential criteria for delirium have been reduced progressively through DSM-III-R to DSM-IV. As the field moves toward DSM-V and ICD-11, new data can shed light on the nosological changes that are needed so that diagnostic criteria can reflect empirical data. In this study, we reassess the existing or potential criteria for delirium. Phenomenological studies in recent years have informed the criteria for delirium, including the appropriateness of the term 'consciousness' as a core symptom of the diagnosis, additional symptoms of delirium that are frequent but are not currently part of the diagnostic criteria, subsyndromal delirium, motoric subtypes of delirium (hyperactive, hypoactive), and the association of delirium with dementia. Recent studies suggest that motoric subtypes should be included as a subtype for delirium but that subsyndromal delirium, although a useful research construct, should not be included in clinical diagnostic criteria given the frequent fluctuation in symptoms over short periods. In addition, though the core symptoms are probably adequate to make the diagnosis, clinicians must be aware of the frequency of other symptoms, for symptoms such as profound sleep disturbance or psychotic symptoms may dominate the clinical picture.

Rationales for the Lightning Launch Commit Criteria

Science.gov (United States)

Willett, John C. (Editor); Merceret, Francis J. (Editor); Krider, E. Philip; O'Brien, T. Paul; Dye, James E.; Walterscheid, Richard L.; Stolzenburg, Maribeth; Cummins, Kenneth; Christian, Hugh J.; Madura, John T.

2016-01-01

Since natural and triggered lightning are demonstrated hazards to launch vehicles, payloads, and spacecraft, NASA and the Department of Defense (DoD) follow the Lightning Launch Commit Criteria (LLCC) for launches from Federal Ranges. The LLCC were developed to prevent future instances of a rocket intercepting natural lightning or triggering a lightning flash during launch from a Federal Range. NASA and DoD utilize the Lightning Advisory Panel (LAP) to establish and develop robust rationale from which the criteria originate. The rationale document also contains appendices that provide additional scientific background, including detailed descriptions of the theory and observations behind the rationales. The LLCC in whole or part are used across the globe due to the rigor of the documented criteria and associated rationale. The Federal Aviation Administration (FAA) adopted the LLCC in 2006 for commercial space transportation and the criteria were codified in the FAA's Code of Federal Regulations (CFR) for Safety of an Expendable Launch Vehicle (Appendix G to 14 CFR Part 417, (G417)) and renamed Lightning Flight Commit Criteria in G417.

Diagnostic accuracy of the Salzburg EEG criteria for non-convulsive status epilepticus

DEFF Research Database (Denmark)

Leitinger, Markus; Trinka, Eugen; Gardella, Elena

2016-01-01

Background Several EEG criteria have been proposed for diagnosis of non-convulsive status epilepticus (NCSE), but none have been clinically validated. We aimed to assess the diagnostic accuracy of the EEG criteria proposed by a panel of experts at the fourth London–Innsbruck Colloquium on Status...... Epilepticus in Salzburg, 2013 (henceforth called the Salzburg criteria). Methods We did a retrospective, diagnostic accuracy study using EEG recordings from patients admitted for neurological symptoms or signs to three centres in two countries (Danish Epilepsy Centre, Dianalund, Denmark; Aarhus University...

A multi-criteria decision analysis assessment of waste paper management options

Energy Technology Data Exchange (ETDEWEB)

Hanan, Deirdre [Department of Design, Development, Environment and Materials, The Open University, Walton Hall, Milton Keynes, MK7 6AA (United Kingdom); Burnley, Stephen, E-mail: s.j.burnley@open.ac.uk [Department of Design, Development, Environment and Materials, The Open University, Walton Hall, Milton Keynes, MK7 6AA (United Kingdom); Cooke, David [Department of Design, Development, Environment and Materials, The Open University, Walton Hall, Milton Keynes, MK7 6AA (United Kingdom)

2013-03-15

Highlights: ► Isolated communities have particular problems in terms of waste management. ► An MCDA tool allowed a group of non-experts to evaluate waste management options. ► The group preferred local waste management solutions to export to the mainland. ► Gasification of paper was the preferred option followed by recycling. ► The group concluded that they could be involved in the decision making process. - Abstract: The use of Multi-criteria Decision Analysis (MCDA) was investigated in an exercise using a panel of local residents and stakeholders to assess the options for managing waste paper on the Isle of Wight. Seven recycling, recovery and disposal options were considered by the panel who evaluated each option against seven environmental, financial and social criteria. The panel preferred options where the waste was managed on the island with gasification and recycling achieving the highest scores. Exporting the waste to the English mainland for incineration or landfill proved to be the least preferred options. This research has demonstrated that MCDA is an effective way of involving community groups in waste management decision making.

A multi-criteria decision analysis assessment of waste paper management options

International Nuclear Information System (INIS)

Hanan, Deirdre; Burnley, Stephen; Cooke, David

2013-01-01

Highlights: ► Isolated communities have particular problems in terms of waste management. ► An MCDA tool allowed a group of non-experts to evaluate waste management options. ► The group preferred local waste management solutions to export to the mainland. ► Gasification of paper was the preferred option followed by recycling. ► The group concluded that they could be involved in the decision making process. - Abstract: The use of Multi-criteria Decision Analysis (MCDA) was investigated in an exercise using a panel of local residents and stakeholders to assess the options for managing waste paper on the Isle of Wight. Seven recycling, recovery and disposal options were considered by the panel who evaluated each option against seven environmental, financial and social criteria. The panel preferred options where the waste was managed on the island with gasification and recycling achieving the highest scores. Exporting the waste to the English mainland for incineration or landfill proved to be the least preferred options. This research has demonstrated that MCDA is an effective way of involving community groups in waste management decision making

ACR Appropriateness Criteria® Routine Chest Radiography.

Science.gov (United States)

McComb, Barbara L; Chung, Jonathan H; Crabtree, Traves D; Heitkamp, Darel E; Iannettoni, Mark D; Jokerst, Clinton; Saleh, Anthony G; Shah, Rakesh D; Steiner, Robert M; Mohammed, Tan-Lucien H; Ravenel, James G

2016-03-01

Chest radiographs are sometimes taken before surgeries and interventional procedures on hospital admissions and outpatients. This manuscript summarizes the American College of Radiology review of the literature and recommendations on routinely performed chest radiographies in these settings. The American College of Radiology Appropriateness Criteria are evidence-based guidelines for specific clinical conditions that are reviewed every 3 years by a multidisciplinary expert panel. The guideline development and review include an extensive analysis of current medical literature from peer-reviewed journals and the application of a well-established consensus methodology (modified Delphi) to rate the appropriateness of imaging and treatment procedures by the panel. In those instances in which evidence is lacking or not definitive, expert opinion may be used to recommend imaging or treatment.

Great Lakes water quality initiative criteria documents for the protection of aquatic life in ambient water. Draft report

International Nuclear Information System (INIS)

1993-02-01

The document discusses the Tier 1 aquatic life criteria for 16 criteria documents. The compounds and metals discussed are Arsenic (III), Cadmium, Chromium (III), Chromium (VI), Copper, Cyanide (free), Dieldrin, Endrin, Lindane, Mercury (II), Nickel, Parathion, Pentachlorophenol, Phenol, Selenium, and Zinc

Criteria for saturated magnetization loop

International Nuclear Information System (INIS)

Harres, A.; Mikhov, M.; Skumryev, V.; Andrade, A.M.H. de; Schmidt, J.E.; Geshev, J.

2016-01-01

Proper estimation of magnetization curve parameters is vital in studying magnetic systems. In the present article, criteria for discrimination non-saturated (minor) from saturated (major) hysteresis loops are proposed. These employ the analysis of (i) derivatives of both ascending and descending branches of the loop, (ii) remanent magnetization curves, and (iii) thermomagnetic curves. Computational simulations are used in order to demonstrate their validity. Examples illustrating the applicability of these criteria to well-known real systems, namely Fe_3O_4 and Ni fine particles, are provided. We demonstrate that the anisotropy-field value estimated from a visual examination of an only apparently major hysteresis loop could be more than two times lower than the real one. - Highlights: • Proper estimation of hysteresis-loop parameters is vital in magnetic studies. • We propose criteria for discrimination minor from major hysteresis loops. • The criteria analyze magnetization, remanence and ZFC/FC curves and/or their derivatives. • Examples of their application on real nanoparticles systems are given. • Using the criteria could avoid twofold or bigger saturation-field underestimation errors.

Criteria for saturated magnetization loop

Energy Technology Data Exchange (ETDEWEB)

Harres, A. [Departamento de Física, UFSM, Santa Maria, 97105-900 Rio Grande do Sul (Brazil); Mikhov, M. [Faculty of Physics, University of Sofia, 1164 Sofia (Bulgaria); Skumryev, V. [Institució Catalana de Recerca i Estudis Avançats, 08010 Barcelona (Spain); Departament de Física, Universitat Autònoma de Barcelona, 08193 Barcelona (Spain); Andrade, A.M.H. de; Schmidt, J.E. [Instituto de Física, UFRGS, Porto Alegre, 91501-970 Rio Grande do Sul (Brazil); Geshev, J., E-mail: julian@if.ufrgs.br [Departament de Física, Universitat Autònoma de Barcelona, 08193 Barcelona (Spain); Instituto de Física, UFRGS, Porto Alegre, 91501-970 Rio Grande do Sul (Brazil)

2016-03-15

Proper estimation of magnetization curve parameters is vital in studying magnetic systems. In the present article, criteria for discrimination non-saturated (minor) from saturated (major) hysteresis loops are proposed. These employ the analysis of (i) derivatives of both ascending and descending branches of the loop, (ii) remanent magnetization curves, and (iii) thermomagnetic curves. Computational simulations are used in order to demonstrate their validity. Examples illustrating the applicability of these criteria to well-known real systems, namely Fe{sub 3}O{sub 4} and Ni fine particles, are provided. We demonstrate that the anisotropy-field value estimated from a visual examination of an only apparently major hysteresis loop could be more than two times lower than the real one. - Highlights: • Proper estimation of hysteresis-loop parameters is vital in magnetic studies. • We propose criteria for discrimination minor from major hysteresis loops. • The criteria analyze magnetization, remanence and ZFC/FC curves and/or their derivatives. • Examples of their application on real nanoparticles systems are given. • Using the criteria could avoid twofold or bigger saturation-field underestimation errors.

Ergonomic evaluation of CRT display in new control panels for nuclear power stations

International Nuclear Information System (INIS)

Kabazawa, Yoshihiko

1983-01-01

New control panels are to support powerfully the synthetic judgement function of operators by processing enormous plant data in the normal operation and at the time of accidents in nuclear power stations, and displaying the results in collective and ordered form on CRTs. This time, by carrying out the evaluation of new control panels using human engineering method, it was able to be confirmed that the new control panels have achieved the initial objectives, and to determine the criteria for the ergonomic evaluation of central control panels mainly with CRT display. Besides, it is considered that the application to wide range can be expected for this evaluation, not only to the CRT display system of the new control panels for nuclear power stations but also to other CRT images, therefore, the outline is reported. Chubu Electric Power Co., Inc. plans to adopt the new control panels with CRT display effectively utilizing process computers hereafter. It is necessary to give sufficient consideration to the method of using CRT images, the kinds of displayed images, colors and the form and arrangement of letters and symbols. 12 CRTs are used for the new control panel. The results are reflected to the control panel for Hamaoka No.3 plant. (Kako, I.)

Portfolio selection using ELECTRE III: Evidence from Tehran Stock Exchange

Directory of Open Access Journals (Sweden)

Aazam Shabani Vezmelai

2015-04-01

Full Text Available Ranking the companies can be a useful guide for investors to select an optimum portfolio. Tehran stock exchange (TSE uses liquidity criterion to rank the companies; however, this study shows that preferences of investors, the criteria they use to evaluate companies’ performances, and the extent to which ranking of companies based on investors’ criteria are in line with the ranking announced by the stock exchange. Since the criteria used for ranking the companies are various and often conflicting and because each multiple criteria technique has its own specific characteristics, various rankings are offered. Therefore, it is required to utilize multiple criteria decision making models to avoid confusion of investors. For this purpose, some companies were selected from 50 top companies listed in 2011 in TSE, which maintained the reliability of their ranks and finally, 20 companies were selected and were ranked based on investors’ criteria using EECTRE III Technique. The obtained ranking was then compared with the ranking offered by stock exchange. Research results indicate that ELECTRE III technique was a useful and efficient method to select a portfolio. Moreover, value-based criteria as well as accounting criteria are suitable and useful bases for investors to select a portfolio.

Pathophysiology of functional heartburn based on Rome III criteria in Japanese patients.

Science.gov (United States)

Tamura, Yasuhiro; Funaki, Yasushi; Izawa, Shinya; Iida, Akihito; Yamaguchi, Yoshiharu; Adachi, Kazunori; Ogasawara, Naotaka; Sasaki, Makoto; Kaneko, Hiroshi; Kasugai, Kunio

2015-04-28

To investigate the pathophysiology of functional heartburn (FH) in Japanese patients. A total of 111 patients with proton pump inhibitor (PPI)-refractory non-erosive gastroesophageal reflux disease underwent intraesophageal pressure testing and 24-h multichannel intraluminal impedance-pH (24MII-pH) testing. The patients also completed several questionnaires while they were receiving the PPI treatment, including the questionnaire for the diagnosis of reflux disease (QUEST), the frequency scale for the symptoms of gastroesophageal reflux disease (FSSG), the gastrointestinal symptoms rating scale (GSRS), SF-36, and the Cornell Medical Index (CMI). The subjects were classified into FH and endoscopy-negative reflux disease (ENRD) groups based on the Rome III criteria. Thirty-three patients with esophageal motility disorder were excluded from this study, while 22 patients with abnormal esophageal acid exposure time (pH-POS) and 34 with hypersensitive esophagus (HE) were included in the ENRD group. The FH group included 22 patients with no reflux involvement. Sex, age, and body mass index did not differ significantly between the groups. The mean SF-36 values were < 50 (normal) for all scales in these groups, with no significant differences. The GSRS scores in these groups were not different and showed overlap with other gastrointestinal symptoms. The QUEST and the FSSG scores did not differ significantly between the groups. Neuroticism was diagnosed using the CMI questionnaire in 17 of the 78 included subjects within the pH-POS (n = 4), HE (n = 8), and FH (n = 5) groups, with no significant differences. Clinical characteristics of the FH and PPI-refractory ENRD groups were similar. Therefore, esophageal function should be examined via manometry and 24MII-pH testing to differentiate between them.

Rethinking ASME III seismic analysis for piping operability evaluations

International Nuclear Information System (INIS)

Adams, T.M.; Stevenson, J.D.

1994-01-01

It has been recognized since the mid 1980's that there are very large seismic margins to failure for nuclear piping systems when designed using current industry practice, design criteria, and methods. As a result of this realization there are or have been approximately eighteen initiatives within the ASME , Boiler and Pressure Vessel Code Section III, Division 1, in the form of proposed code cases and proposed code text changes designed to reduce these failure margins to more realistic values. For the most part these initiatives have concentrated on reclassifying seismic inertia stresses in the piping as secondary and increasing the allowable stress limits permitted by Section III of the ASME, Boiler Code. This paper focuses on the application of non-linear spectral analysis methods as a method to reduce the input seismic demand determination and thereby reduce the seismic failure margins. The approach is evaluated using the ASME Boiler Pressure Vessel Code Section III Subgroup on Design benchmark procedure as proposed by the Subgroup's Special Task Group on Integrated Piping Criteria. Using this procedure, criteria are compared to current code criterion and analysis methods, and several other of the currently proposed Boiler and Pressure Vessel, Section III, changes. Finally, the applicability of the non-linear spectral analysis to continued Safe Operation Evaluations is reviewed and discussed

[Rome III classification of functional gastrointestinal disorders in children with chronic abdominal pain].

Science.gov (United States)

Plocek, Anna; Wasowska-Królikowska, Krystyna; Toporowska-Kowalska, Ewa

2010-01-01

The updated Rome III Classification of paediatric functional gastrointestinal disorders (FGIDs) associated with abdominal pain comprises: functional dyspepsia (FD), irritable bowel syndrome (IBS), abdominal migraine, functional abdominal pain (FAP), functional abdominal pain syndrome (FAPS). To assess the value of the Rome criteria in identifying FGIDs in children with chronic abdominal pain. The study group consisted of 439 consecutive paediatric patients (192 boys and 247 girls) aged 4-18 years (mean age was 11.95 +/- 3.89 years) referred to the Paediatric Gastroenterology Department at Medical University of Lodz from January 2008 to June 2009 for evaluation of abdominal pain of at least 2 months' duration. After exclusion of organic disease children suspected of functional chronic abdominal pain were categorized with the use of Rome III criteria of FGIDs associated with abdominal pain (H2a-H2d1) and the Questionnaire on Paediatric Gastrointestinal Symptoms (with the permission of doctor L. S. Walker). The patients with known nonabdominal organic disease, chronic illness or handicap were excluded. In 161 patients (36.58%) organic etiology was confirmed. Of the 278 children (63.42%) with functional chronic abdominal pain, 228 (82.02%) met the Rome III criteria for FGIDs associated with abdominal pain (FD, 15.5%; IBS, 21.6%; abdominal migraine, 5%; FAP 24.5%; FAPS, 15.9%). Fifty cases (17.98%) did not fulfill the criteria for subtypes of abdominal pain-related FGIDs--mainly due to different as defined by Rome III criteria (at least once per week) frequency of symptom presentation. (1) In the authors'investigations FGIDs was the most frequent cause of chronic abdominal pain in children. (2) The significant number of children with nonclassified FGIDs implies the need to modify the diagnostic criteria of Rome III classification concerning the prevalence of symptoms.

All-Cause Mortality Risk of Metabolically Healthy Obese Individuals in NHANES III

Directory of Open Access Journals (Sweden)

C. M. Durward

2012-01-01

Full Text Available Mortality risk across metabolic health-by-BMI categories in NHANES-III was examined. Metabolic health was defined as: (1 homeostasis model assessment-insulin resistance (HOMA-IR <2.5; (2 ≤2 Adult Treatment Panel (ATP III metabolic syndrome criteria; (3 combined definition using ≤1 of the following: HOMA-IR ≥1.95 (or diabetes medications, triglycerides ≥1.7 mmol/L, HDL-C <1.04 mmol/L (males or <1.30 mmol/L (females, LDL-C ≥2.6 mmol/L, and total cholesterol ≥5.2 mmol/L (or cholesterol-lowering medications. Hazard ratios (HR for all-cause mortality were estimated with Cox regression models. Nonpregnant women and men were included (n=4373, mean ± SD, age 37.1±10.9 years, BMI 27.3±5.8 kg/m2, 49.4% female. Only 40 of 1160 obese individuals were identified as MHO by all definitions. MHO groups had superior levels of clinical risk factors compared to unhealthy individuals but inferior levels compared to healthy lean groups. There was increased risk of all-cause mortality in metabolically unhealthy obese participants regardless of definition (HOMA-IR HR 2.07 (CI 1.3–3.4, P<0.01; ATP-III HR 1.98 (CI 1.4–2.9, P<0.001; combined definition HR 2.19 (CI 1.3–3.8, P<0.01. MHO participants were not significantly different from healthy lean individuals by any definition. While MHO individuals are not at significantly increased risk of all-cause mortality, their clinical risk profile is worse than that of metabolically healthy lean individuals.

Panel Analysis

DEFF Research Database (Denmark)

Brænder, Morten; Andersen, Lotte Bøgh

2014-01-01

Based on our 2013-article, ”Does Deployment to War Affect Soldiers' Public Service Motivation – A Panel Study of Soldiers Before and After their Service in Afghanistan”, we present Panel Analysis as a methodological discipline. Panels consist of multiple units of analysis, observed at two or more...... in research settings where it is not possible to distribute units of analysis randomly or where the independent variables cannot be manipulated. The greatest disadvantage in regard to using panel studies is that data may be difficult to obtain. This is most clearly vivid in regard to the use of panel surveys...... points in time. In comparison with traditional cross-sectional studies, the advantage of using panel studies is that the time dimension enables us to study effects. Whereas experimental designs may have a clear advantage in regard to causal inference, the strength of panel studies is difficult to match...

Identification of component performance degradations caused by ageing using expert panels

International Nuclear Information System (INIS)

Nitoi, Mirela; Cristea, Dumitru; Pavelescu, Margarit

2008-01-01

Since the component ageing can be considered as one of the important causes of operating events reported, the identification of ageing effects and implementation of appropriate methods for mitigation of these effects represent an important preoccupation of many organizations and research activities. In the process of identification of ageing manifestation we can use either analysis of operational data or expert opinions, each of the methods having specific advantages and disadvantages. A reasonable combination of statistical, structural reliability and expert panel methods would be an appropriate approach in the failure probability assessments. In case when there are not enough operational data, the expert judgments represent the only viable alternative in the effort dedicated to identification of components and systems vulnerability to ageing. The panel use judgments to analyse the degradation produced by ageing, to score the components based on specific criteria and to rank them relative to one another. The paper presents the approach developed, including evaluation criteria and assigning indices for assessment of particular types of ageing degradation (the case of secondary system of TRIGA reactor). (authors)

Prevalence and determinants of metabolic syndrome among adults in a rural area of Northwest China.

Directory of Open Access Journals (Sweden)

Yaling Zhao

Full Text Available To evaluate the prevalence and determinants of metabolic syndrome (MetS among adults in a rural area of Northwest China.A population-based cross-sectional study was conducted in 2010 among adults aged 18 to 80 years in rural areas of Hanzhong, in Northwest China. Interview, physical and clinical examinations, and fasting blood glucose and lipid measurements were completed for 2990 adults. The definitions of MetS proposed by the Third Report of the National Cholesterol Education Program Expert Panel (Adults Treatment Panel III, ATP III and the International Diabetes Federation (IDF, and the modified ATP III definition for Asian population were used and compared. Proportions were adjusted for age and sex.The prevalence of MetS was 7.9%, 10.8% and 15.1% according to ATP III, IDF and modified ATP III criteria, respectively. Agreement between ATP III and IDF criteria and that between ATP III and modified ATP III criteria were moderate (Kappa = 0.52 and 0.64, respectively, whereas agreement between IDF and modified ATP III criteria was good (Kappa = 0.83. The prevalence of MetS increased with age, and was higher in women than in men (10.4% versus 5.4%, 13.6% versus 8.1% and 17.4% versus 12.8%, according to ATP III, IDF and modified ATP III criteria, respectively. The most common MetS component was high blood pressure. Having family history of hypertension, lack of physical activity, high economical level, overweight and obesity were positively associated with MetS.MetS is prevalent among rural adults in Northwest China and high blood pressure is the most common MetS component. Prevention and treatment of hypertension and MetS should be a public health priority to reduce cardiovascular diseases in rural areas of Northwest China. More attention should be given to the elderly, women, people with family history of hypertension and obese people who are at high risk of MetS.

Development and Validation of Quality Criteria for Providing Patient- and Family-centered Injury Care.

Science.gov (United States)

Boyd, Jamie M; Burton, Rachael; Butler, Barb L; Dyer, Dianne; Evans, David C; Felteau, Melissa; Gruen, Russell L; Jaffe, Kenneth M; Kortbeek, John; Lang, Eddy; Lougheed, Val; Moore, Lynne; Narciso, Michelle; Oxland, Peter; Rivara, Frederick P; Roberts, Derek; Sarakbi, Diana; Vine, Karen; Stelfox, Henry T

2017-08-01

The aim of this study was to develop and evaluate the content validity of quality criteria for providing patient- and family-centered injury care. Quality criteria have been developed for clinical injury care, but not patient- and family-centered injury care. Using a modified Research AND Development Corporation (RAND)/University of California, Los Angeles (UCLA) Appropriateness Methodology, a panel of 16 patients, family members, injury and quality of care experts serially rated and revised criteria for patient- and family-centered injury care identified from patient and family focus groups. The criteria were then sent to 384 verified trauma centers in the United States, Canada, Australia, and New Zealand for evaluation. A total of 46 criteria were rated and revised by the panel over 4 rounds of review producing 14 criteria related to clinical care (n = 4; transitions of care, pain management, patient safety, provider competence), communication (n = 3; information for patients/families; communication of discharge plans to patients/families, communication between hospital and community providers), holistic care (n = 4; patient hygiene, kindness and respect, family access to patient, social and spiritual support) and end-of-life care (n = 3; decision making, end-of-life care, family follow-up). Medical directors, managers, or coordinators representing 254 trauma centers (66% response rate) rated 12 criteria to be important (95% of responses) for patient- and family-centered injury care. Fewer centers rated family access to the patient (80%) and family follow-up after patient death (65%) to be important criteria. Fourteen-candidate quality criteria for patient- and family-centered injury care were developed and shown to have content validity. These may be used to guide quality improvement practices.

The DSM diagnostic criteria for gender identity disorder in children.

Science.gov (United States)

Zucker, Kenneth J

2010-04-01

In this article, I review the diagnostic criteria for Gender Identity Disorder (GID) in children as they were formulated in the DSM-III, DSM-III-R, and DSM-IV. The article focuses on the cumulative evidence for diagnostic reliability and validity. It does not address the broader conceptual discussion regarding GID as "disorder," as this issue is addressed in a companion article by Meyer-Bahlburg (2009). This article addresses criticisms of the GID criteria for children which, in my view, can be addressed by extant empirical data. Based in part on reanalysis of data, I conclude that the persistent desire to be of the other gender should, in contrast to DSM-IV, be a necessary symptom for the diagnosis. If anything, this would result in a tightening of the diagnostic criteria and may result in a better separation of children with GID from children who display marked gender variance, but without the desire to be of the other gender.

Application of Delphi expert panel in joint venture projects

Science.gov (United States)

Adnan, H.; Rosman, M. R.; Rashid, Z. Z. Ahmad; Mohamad Yusuwan, N.; Bakhary, N. A.

2018-02-01

This study was conducted with the aim to identify the application of the Delphi Technique in validating findings obtained from questionnaire surveys and interviews done in- depth on the subject of joint venture projects in Malaysia. The Delphi technique aims to achieve a consensus of opinion amongst expert panellist that were selected on the primary factors in JV projects. To achieve research objectives, a progressive series of questions was designed where a selected panel of expert to confirm and validate the final findings. The rationale, benefits, limitations and recommendations for the use of Delphi were given in this study. From the literature review done, twenty-one factors were identified as critical factors to the making any joint venture project successful. Detail information from contractors were obtained by using the questionnaire survey method and forty-three in-depth interviews were carried out. Trust between partners, mutual understanding, partner selection criteria, agreement of contract, objective compatibility, conflict, and commitment were confirmed by the Delphi panel to be the critical success factors besides another fourteen factors which were found to be the Failure Reduction Criteria. Delphi techniques has proven to successfully assist in recognising the main factors and would be beneficial in supplementing the success of joint venture arrangements application for construction projects in Malaysia.

Stability of response characteristics of a Delphi panel: application of bootstrap data expansion

Directory of Open Access Journals (Sweden)

Cole Bryan R

2005-12-01

Full Text Available Abstract Background Delphi surveys with panels of experts in a particular area of interest have been widely utilized in the fields of clinical medicine, nursing practice, medical education and healthcare services. Despite this wide applicability of the Delphi methodology, there is no clear identification of what constitutes a sufficient number of Delphi survey participants to ensure stability of results. Methods The study analyzed the response characteristics from the first round of a Delphi survey conducted with 23 experts in healthcare quality and patient safety. The panel members had similar training and subject matter understanding of the Malcolm Baldrige Criteria for Performance Excellence in Healthcare. The raw data from the first round sampling, which usually contains the largest diversity of responses, were augmented via bootstrap sampling to obtain computer-generated results for two larger samples obtained by sampling with replacement. Response characteristics (mean, trimmed mean, standard deviation and 95% confidence intervals for 54 survey items were compared for the responses of the 23 actual study participants and two computer-generated samples of 1000 and 2000 resampling iterations. Results The results from this study indicate that the response characteristics of a small expert panel in a well-defined knowledge area are stable in light of augmented sampling. Conclusion Panels of similarly trained experts (who possess a general understanding in the field of interest provide effective and reliable utilization of a small sample from a limited number of experts in a field of study to develop reliable criteria that inform judgment and support effective decision-making.

Performance of Doublet III neutral beam injector cryopumping system

International Nuclear Information System (INIS)

Langhorn, A.R.; Kim, J.; Tupper, M.L.; Williams, J.P.; Fasolo, J.

1984-01-01

The Doublet III neutral beam injector system is based on three beamlines; each beamline employs two 80 kV/80 A hydrogen ion sources. Two liquid helium (LHe) cooled cryopanel arrays were designed as an integral part of the beamline in order to provide high differential pumping of hydrogen gas along the beamline. The cryopanel arrays consist of a front (nearer to the torus) disk panel (3 m 2 each side) with liquid nitrogen (LN 2 ) cooled chevrons and a rear cylindrical panel of modified Santeler panels (8 m 2 ) which also employs LN 2 cooled surfaces shielding LHe cooled surfaces. These cryopanels are piped in series. The LHe delivery is based on a closed-loop, forced-flow scheme intended for variable panel temperatures (3.7 to 4.3 K). It uses small tubes for mechanical flexibility and thermal resiliency providing ease of economic defrosting. The cryogenic system consists of a liquefier (100 l/h), a large Dewar, a heat exchanger, and a liquid ring pump. Three beamlines are serviced simultaneously by the system. Pumping speeds measured locally at ionization gauges, were well in excess of the 1.4 x 10 6 l/s design goal

The Relationship between Export and Growth: Panel Data Evidence from Turkish Sectors

Directory of Open Access Journals (Sweden)

Alper Aslan

2018-04-01

Full Text Available The aim of this study is to examine the impact of sectoral exports on economic growth in Turkey over the period 2000–2015. To this end, empirical models are estimated using panel data techniques in which quarterly data are gathered for eight sectors. Findings in the case of the pooled panel indicate the validity of the export-led growth hypothesis. Disaggregated evidences, on the other hand, reveal the validity of export-led growth hypothesis in the case of (i agriculture and forestry; (ii fishing; (iii mining and quarrying; (iv manufacturing; (v electricity, gas and water supply; and (vi wholesale and retail trade while it is found to be invalid in the case of (i real estate, renting and business activities; and (ii other community, social and personal service activities. The sectors that have the highest growth contributions are listed as follows: (i agriculture and forestry; (ii mining and quarrying; and (iii manufacturing. Causality results also provide a strong support in favor of an export-led growth hypothesis for four sectors in addition to the feedback hypothesis which is valid for three sectors.

NWTS conceptual reference repository description (CRRD). Volume III. Criteria, bases, special studies, and codes

International Nuclear Information System (INIS)

1981-05-01

This volume documents the criteria, design bases, and special studies and provides the backup for the design presented in Volume II. The criteria presented here were developed by ONWI as a draft version for consideration in this conceptual report. Since these criteria were developed subsequent to preparation of the reports used as a basis for the CRRD, not all of the criteria could be fully considered in preparation of the CRRD. However, they were used as guidelines wherever possible. The criteria for terminal storage of waste are still in development. The chapter on the design bases identifies the important design considerations and provides the justification for their selection. The design bases were developed not so much to give exact values for parameters as to identify the parameters that are significant to the design. They also serve as a common basis for coordinating analysis and design studies unitl the next design phase is completed. Some of the design bases presented here were taken directly from the Stearns-Roger NWTS-R1 Conceptual Design Report. The special studies document technical aspects of the design that are of particular importance or that furnish additional information pertaining to the design

Panel and planar experimental shear behavior of wood panels ...

African Journals Online (AJOL)

Panel shear strength along the thickness and planar shear along the length of wood panels laminated softwood oriented OSB 10 mm thick, conditioned at different moisture contents (anhydrous medium, ambient temperature and humid medium) was measured on standardized test specimens, cut in half lengthwise panel ...

Insights from the panel review process

International Nuclear Information System (INIS)

Searborn, B.

1998-01-01

The environmental review process for nuclear waste management and disposal was unusual in that the Panel was asked to examine a concept rather than a specific project at a specific site. The Panel was charged with commenting on the safety and acceptability of the AECL concept, examining criteria for determining the safety and acceptability of any concept for managing nuclear fuel waste, and examining future steps which should be taken. In short, it was asked to provide policy advice to governments. The Panel concluded that safety is a key part, but only one part, of acceptability, and that safety must be viewed from both a technical and a social perspective. It judged that safety of the AECL concept had been adequately demonstrated from a technical perspective, but not from a social perspective. It also concluded that the AECL concept does not have the required level of public acceptability to be adopted as Canada's approach for managing nuclear fuel wastes. The paper examines in some detail the various aspects of the public concerns surrounding the nuclear cycle in general, and the safety of the proposals put forward by AECL for nuclear fuel waste management in particular. It notes the differences between those who look at safety from a technical perspective, and those who look at safety from a social perspective. And it lists the concerns related to acceptability in addition to the key factor of safety. After outlining the Panel's recommendations to governments on future steps to be taken, the paper discusses the extent to which the recommendations respond to the public's concerns. It stresses the importance of Aboriginal participation; of the creation of a new agency to deal with the full range of activities, technical and social, related to long-term management; of the public and decision-makers having more than one viable option to choose from; and of the essentiality of an inter-active process of public participation at all stages of decision-making. Finally

Idiopathic inflammatory myopathies in adults: A comparative study of Bohan and Peter and European Neuromuscular Center 2004 criteria.

Science.gov (United States)

Challa, Sundaram; Jakati, Saumya; Uppin, Megha S; Kannan, Meena A; Liza, Rajasekhar; Murthy Jagarlapudi, M K

2018-01-01

Bohan and Peter criteria are widely used for the diagnosis of idiopathic inflammatory myopathies (IIMs). Recently, European Neuromuscular Center (ENMC) formulated criteria to identify subgroups of IIMs. To compare the two diagnostic criteria in adult IIMs. This was a retrospective review of case records of histologically confirmed IIMs in adults between January 2014 and May 2015. Both the Bohan and Peter, and ENMC 2004 criteria were applied in the same group of patients to subgroup the IIMs. Muscle biopsy was evaluated in all the four domains: muscle fiber, inflammatory, connective tissue, and vascular, with the basic panel of histological stains. Sporadic inclusion body myositis (s-IBM) was diagnosed using ENMC IBM diagnostic research criteria 2011. During the study period, 69 patients fulfilled the ENMC criteria for IIMs including 16 patients with s-IBM. The subgrouping as per the ENMC criteria (53) was: dermatomyositis (DM) in 30; polymyositis (PM) in 2; immune-mediated necrotizing myopathy (IMNM) in 9; and nonspecific myositis (NM) in 12 patients, whereas subgrouping by the Bohan and Peter criteria was DM in 9 and PM with and without connective tissue disease (CTD) in 26 patients only. There was underdiagnosis of DM, as perifascicular atrophy is not recognized as a diagnostic histological feature, and overdiagnosis of PM with and without CTD due to poor characterization of histological features in PM by the Bohan and Peter criteria. Systematic evaluation of muscle biopsy according to the ENMC criteria with basic panel of histochemical stains improved the diagnostic yield of IIM significantly when compared to the Bohan and Peter criteria.

Optimum design of composite panel with photovoltaic-thermo module. Absorbing effect of cooling panel; Hikari netsu fukugo panel no saiteki sekkei. Reikyaku panel no kyunetsu koka

Energy Technology Data Exchange (ETDEWEB)

Sato, M; Kikuchi, S; Tani, T [Science University of Tokyo, Tokyo (Japan); Kadotani, K; Imaizumi, H [Komatsu Ltd., Tokyo (Japan)

1996-10-27

The composite panel with photovoltaic-thermo module becomes higher in energy-saving than the conventional air-conditioning system by the independent radiational heating and cooling effect obtained when the generating panel using a solar cell module is combined with the heating and cooling panel using a thermo-element module. The output of a solar cell module can be directly used because the solar cell module operates in AC. This paper reports the relation between the absorbed value and power consumption of the cooling panel, while paying attention to the cooling panel. The performance coefficient of the maximum absorbed value from an non-absorbing substance to a cooling panel is 2 to 3. Assume that the cooling panel during non-adiabatic operation is operated using a solar cell module of 800 W/m{sup 2} in solar intensity and 15% in conversion efficiency. The cooling-surface temperature difference is 12.12 K, and the maximum absorbed value of a non-absorbing substance to a cooling panel is 39.12 W/m{sup 2}. The absorbed value of the outer temperature to the cooling panel is 74.4 W/m{sup 2}, and each performance coefficient is 3.26 and 0.62. The absorbed value must be calculated for evaluation from the cooling-surface temperature difference measured directly from the cooling panel. 4 refs., 8 figs., 1 tab.

The majority of patients with metastatic melanoma are not represented in pivotal phase III immunotherapy trials

DEFF Research Database (Denmark)

Donia, Marco; Kimper-Karl, Marie Louise; Høyer, Katrine Lundby

2017-01-01

BACKGROUND: Recent randomised phase III trials have led to the approval of several immune checkpoint inhibitors for unresectable or metastatic melanoma (MM). These trials all employed strict patient selection criteria, and it is currently unknown how large proportion of 'real-world' patients diag...... a huge knowledge gap regarding the usefulness of new immunotherapies in the 'real-world' patient population, and urge additional testing of known regimens in selected poor prognosis cohorts.......BACKGROUND: Recent randomised phase III trials have led to the approval of several immune checkpoint inhibitors for unresectable or metastatic melanoma (MM). These trials all employed strict patient selection criteria, and it is currently unknown how large proportion of 'real-world' patients...... in 2014, were included in the analysis. Seven pre-defined eligibility criteria, all used to select patients for enrolment in five recent randomised phase III immunotherapy trials, were analysed. RESULTS: Fifty-five percent of the total population with MM did not meet one or more eligibility criteria ('not...

Classification of pediatric functional gastrointestinal disorders related to abdominal pain using Rome III vs. Rome IV criterions.

Science.gov (United States)

Edwards, Trent; Friesen, Craig; Schurman, Jennifer V

2018-03-17

The primary purpose of this study was to compare Rome III and IV evaluation criteria for irritable bowel syndrome (IBS), functional dyspepsia (FD), and an overlap syndrome consisting of both IBS and FD by assessing the frequency of each diagnosis in a population of children with chronic abdominal pain. Frequencies of Rome IV FD subtypes of postprandial distress syndrome (PDS) and epigastric pain syndrome (EPS) were determined and FD/IBS overlap symptom associations were also assessed. We conducted a cross-sectional retrospective chart review of 106 pediatric patients who had completed standardized medical histories as part of their evaluation for chronic abdominal pain. The patients ranged from eight to 17 years of age and reported having abdominal pain at least weekly for 8 weeks. Patients whose evaluation revealed gastrointestinal disease were excluded. The patients' diagnoses were determined by a single pediatric gastroenterologist utilizing the specific criteria for Rome III and IV, respectively. Patients were significantly more likely to be diagnosed with FD (84.9% vs. 52.8%), IBS (69.8% vs. 34%), and FD/IBS overlap (58.5% vs. 17.9%) by Rome IV criteria, as compared to Rome III criteria. With regard to Rome IV FD subtypes, 81.1% fulfilled criteria for PDS, 11.1% fulfilled criteria for EPS, 6.7% fulfilled criteria for both, and 1.1% did not fulfill criteria for either. Finally, we found an increased frequency of diarrhea and pain with eating in the overlap group compared to the non-overlap group of Rome III, while only an increased frequency of diarrhea was found in the overlap group compared to the non-overlap group of Rome IV. Our data demonstrate that utilizing Rome IV criteria, as compared to Rome III, results in an increase in the diagnosis of FD, a two-fold increase in the diagnosis of IBS, and a three-fold increase in the diagnosis of FD/IBS overlap. Rome IV criteria appears to result in greater heterogeneity within diagnostic categories. It is important

40 CFR 141.71 - Criteria for avoiding filtration.

Science.gov (United States)

2010-07-01

... PROGRAMS (CONTINUED) NATIONAL PRIMARY DRINKING WATER REGULATIONS Filtration and Disinfection § 141.71 Criteria for avoiding filtration. A public water system that uses a surface water source must meet all of...)(C)(iii), that filtration is required. A public water system that uses a ground water source under...

Acoustic contributions of a sound absorbing blanket placed in a double panel structure: absorption versus transmission.

Science.gov (United States)

Doutres, Olivier; Atalla, Noureddine

2010-08-01

The objective of this paper is to propose a simple tool to estimate the absorption vs. transmission loss contributions of a multilayered blanket unbounded in a double panel structure and thus guide its optimization. The normal incidence airborne sound transmission loss of the double panel structure, without structure-borne connections, is written in terms of three main contributions; (i) sound transmission loss of the panels, (ii) sound transmission loss of the blanket and (iii) sound absorption due to multiple reflections inside the cavity. The method is applied to four different blankets frequently used in automotive and aeronautic applications: a non-symmetric multilayer made of a screen in sandwich between two porous layers and three symmetric porous layers having different pore geometries. It is shown that the absorption behavior of the blanket controls the acoustic behavior of the treatment at low and medium frequencies and its transmission loss at high frequencies. Acoustic treatment having poor sound absorption behavior can affect the performance of the double panel structure.

Evaluation Criteria for Interactive E-Books for Open and Distance Learning

Science.gov (United States)

Bozkurt, Aras; Bozkaya, Mujgan

2015-01-01

The aim of this mixed method study is to identify evaluation criteria for interactive e-books. To find answers for the research questions of the study, both quantitative and qualitative data were collected through a four-round Delphi study with a panel consisting of 30 experts. After that, a total of 20 interactive e-books were examined with…

Criteria required for an acceptable point-of-care test for UTI detection: Obtaining consensus using the Delphi technique.

Science.gov (United States)

Weir, Nichola-Jane M; Pattison, Sally H; Kearney, Paddy; Stafford, Bob; Gormley, Gerard J; Crockard, Martin A; Gilpin, Deirdre F; Tunney, Michael M; Hughes, Carmel M

2018-01-01

Urinary Tract Infections (UTIs) are common bacterial infections, second only to respiratory tract infections and particularly prevalent within primary care. Conventional detection of UTIs is culture, however, return of results can take between 24 and 72 hours. The introduction of a point of care (POC) test would allow for more timely identification of UTIs, facilitating improved, targeted treatment. This study aimed to obtain consensus on the criteria required for a POC UTI test, to meet patient need within primary care. Criteria for consideration were compiled by the research team. These criteria were validated through a two-round Delphi process, utilising an expert panel of healthcare professionals from across Europe and United States of America. Using web-based questionnaires, panellists recorded their level of agreement with each criterion based on a 5-point Likert Scale, with space for comments. Using median response, interquartile range and comments provided, criteria were accepted/rejected/revised depending on pre-agreed cut-off scores. The first round questionnaire presented thirty-three criteria to the panel, of which 22 were accepted. Consensus was not achieved for the remaining 11 criteria. Following response review, one criterion was removed, while after revision, the remaining 10 criteria entered the second round. Of these, four were subsequently accepted, resulting in 26 criteria considered appropriate for a POC test to detect urinary infections. This study generated an approved set of criteria for a POC test to detect urinary infections. Criteria acceptance and comments provided by the healthcare professionals also supports the development of a multiplex point of care UTI test.

ACR appropriateness criteria jaundice.

Science.gov (United States)

Lalani, Tasneem; Couto, Corey A; Rosen, Max P; Baker, Mark E; Blake, Michael A; Cash, Brooks D; Fidler, Jeff L; Greene, Frederick L; Hindman, Nicole M; Katz, Douglas S; Kaur, Harmeet; Miller, Frank H; Qayyum, Aliya; Small, William C; Sudakoff, Gary S; Yaghmai, Vahid; Yarmish, Gail M; Yee, Judy

2013-06-01

A fundamental consideration in the workup of a jaundiced patient is the pretest probability of mechanical obstruction. Ultrasound is the first-line modality to exclude biliary tract obstruction. When mechanical obstruction is present, additional imaging with CT or MRI can clarify etiology, define level of obstruction, stage disease, and guide intervention. When mechanical obstruction is absent, additional imaging can evaluate liver parenchyma for fat and iron deposition and help direct biopsy in cases where underlying parenchymal disease or mass is found. Imaging techniques are reviewed for the following clinical scenarios: (1) the patient with painful jaundice, (2) the patient with painless jaundice, and (3) the patient with a nonmechanical cause for jaundice. The ACR Appropriateness Criteria are evidence-based guidelines for specific clinical conditions that are reviewed every 2 years by a multidisciplinary expert panel. The guideline development and review include an extensive analysis of current medical literature from peer-reviewed journals and the application of a well-established consensus methodology (modified Delphi) to rate the appropriateness of imaging and treatment procedures by the panel. In those instances where evidence is lacking or not definitive, expert opinion may be used to recommend imaging or treatment. Copyright © 2013 American College of Radiology. Published by Elsevier Inc. All rights reserved.

Regulatory Safety Issues in the Structural Design Criteria of ASME Section III Subsection NH and for Very High Temperatures for VHTR & GEN IV

Energy Technology Data Exchange (ETDEWEB)

William J. O’Donnell; Donald S. Griffin

2007-05-07

The objective of this task is to identify issues relevant to ASME Section III, Subsection NH [1], and related Code Cases that must be resolved for licensing purposes for VHTGRs (Very High Temperature Gas Reactor concepts such as those of PBMR, Areva, and GA); and to identify the material models, design criteria, and analysis methods that need to be added to the ASME Code to cover the unresolved safety issues. Subsection NH was originally developed to provide structural design criteria and limits for elevated-temperature design of Liquid Metal Fast Breeder Reactor (LMFBR) systems and some gas-cooled systems. The U.S. Nuclear Regulatory Commission (NRC) and its Advisory Committee for Reactor Safeguards (ACRS) reviewed the design limits and procedures in the process of reviewing the Clinch River Breeder Reactor (CRBR) for a construction permit in the late 1970s and early 1980s, and identified issues that needed resolution. In the years since then, the NRC and various contractors have evaluated the applicability of the ASME Code and Code Cases to high-temperature reactor designs such as the VHTGRs, and identified issues that need to be resolved to provide a regulatory basis for licensing. This Report describes: (1) NRC and ACRS safety concerns raised during the licensing process of CRBR , (2) how some of these issues are addressed by the current Subsection NH of the ASME Code; and (3) the material models, design criteria, and analysis methods that need to be added to the ASME Code and Code Cases to cover unresolved regulatory issues for very high temperature service.

Stressed skin panels

Energy Technology Data Exchange (ETDEWEB)

Anon

2001-07-01

Advantages and disadvantages of stressed skin panels, also known as structural insulated panels (SIPs), are discussed as material and labour-saving alternatives to traditional stick framing. Stressed skin panels are manufactured 'sandwich' assemblies with a rigid insulating polystyrene foam core, whose interior and exterior surfaces are bonded into panels. The skins distribute and carry the structural loading while the bonded foam core provides insulation and keeps the two skins aligned. Since there are fewer framing members, there is little thermal bridging and the R-value remains high. SIPs are usually manufactured in four feet by eight feet panels, although some manufacturers can produce panels up to eight feet by forty feet. SIPs are resource efficient as they use less wood than conventional framing (about 25 per cent less); can structurally cover large spans, requiring less supplementary framing. Use of SIPs eliminate the need for headers over small openings; provide the ability to nail anywhere; create less scrap and waste; lessen vulnerability to unfavourable weather and other job-site hazards, can reduce delays, and often can produce significant savings in material and labour costs. Limitations include the more complex approaches to plumbing and electrical systems, although this can be minimized by designers by incorporating much of the plumbing and electrical work on interior (non-panel) walls. Most stressed skin panels require one-half inch interior gypsum drywall. If become wet, stressed skin panels take a long time to dry out and may harbour mold growth. Larger stressed-skin panels used in floors and roofs, may require cranes or other machinery for handling because of their weight. Although not without some environmental impact, overall, stressed skin panels are judged to be a resource-efficient building technology with significant energy-efficiency benefits and distinct advantages over stick framing. 3 photos.

Progress in the design of Normal Heat Flux First Wall panels for ITER

Energy Technology Data Exchange (ETDEWEB)

Cicero, Tindaro, E-mail: Tindaro.Cicero@f4e.europa.eu [Fusion for Energy, Josep Pla 2, Torres Diagonal Litoral B3, 08019 Barcelona (Spain); Jimenez, Marc; D’Amico, Gabriele; Pou, Jordi Ayneto; Dellopoulos, Georges; Alvaro, Elena; Cardenes, Sabas; Banetta, Stefano; Bellin, Boris; Zacchia, Francesco [Fusion for Energy, Josep Pla 2, Torres Diagonal Litoral B3, 08019 Barcelona (Spain); Calcagno, Barbara; Chappuis, Philippe; Gicquel, Stefan; Mitteau, Raphael; Raffray, Rene [ITER Organization, Route de Vinon-sur-Verdon, CS 90 046, 13067 St., Paul Lez Durance Cedex (France)

2015-10-15

Highlights: • Improved detail design of several NHF FW panels for ITER. • Implemented design solutions to improve the manufacturing of NHF FW panels. • Performed FEM simulations for the overall assessment of NHF FW panels. • Performed detailed analyses for integration of diagnostics in the NHF FW panels. - Abstract: A typical NHF FW panel consists of a series of fingers, which represent the elementary plasma facing units and are designed to withstand 15,000 cycles at 2 MW/m{sup 2}. The fingers are mechanically joined and supported by a back structural element or “supporting beam”. The structure of a finger is made of three different materials: stainless steel for the supporting structure, copper chromium zirconium for the heat sink, and beryllium as armour material. Due to their location and to the interfaces with other systems (e.g. Diagnostics, Remote Handling), the NHF FW panels are divided in different main and minor variants. The aim of this paper is to present the design work performed towards the PA signature. CAD detailed models have been created in CATIA for main and minor variants. Examples of local design solutions, as well as design work to achieve the global configuration of specific modules are provided. Finite Element (FE) analyses have been carried out, in order to simulate the operational scenario of ITER and assess the thermo-mechanical behaviour of the most important FW panels against the required design criteria. This design and analyses activity is required to progress towards the finalization of the detailed design of the NHF FW main and minor variants.

Progress in the design of Normal Heat Flux First Wall panels for ITER

International Nuclear Information System (INIS)

Cicero, Tindaro; Jimenez, Marc; D’Amico, Gabriele; Pou, Jordi Ayneto; Dellopoulos, Georges; Alvaro, Elena; Cardenes, Sabas; Banetta, Stefano; Bellin, Boris; Zacchia, Francesco; Calcagno, Barbara; Chappuis, Philippe; Gicquel, Stefan; Mitteau, Raphael; Raffray, Rene

2015-01-01

Highlights: • Improved detail design of several NHF FW panels for ITER. • Implemented design solutions to improve the manufacturing of NHF FW panels. • Performed FEM simulations for the overall assessment of NHF FW panels. • Performed detailed analyses for integration of diagnostics in the NHF FW panels. - Abstract: A typical NHF FW panel consists of a series of fingers, which represent the elementary plasma facing units and are designed to withstand 15,000 cycles at 2 MW/m"2. The fingers are mechanically joined and supported by a back structural element or “supporting beam”. The structure of a finger is made of three different materials: stainless steel for the supporting structure, copper chromium zirconium for the heat sink, and beryllium as armour material. Due to their location and to the interfaces with other systems (e.g. Diagnostics, Remote Handling), the NHF FW panels are divided in different main and minor variants. The aim of this paper is to present the design work performed towards the PA signature. CAD detailed models have been created in CATIA for main and minor variants. Examples of local design solutions, as well as design work to achieve the global configuration of specific modules are provided. Finite Element (FE) analyses have been carried out, in order to simulate the operational scenario of ITER and assess the thermo-mechanical behaviour of the most important FW panels against the required design criteria. This design and analyses activity is required to progress towards the finalization of the detailed design of the NHF FW main and minor variants.

Comprehensive metabolic panel

Science.gov (United States)

Metabolic panel - comprehensive; Chem-20; SMA20; Sequential multi-channel analysis with computer-20; SMAC20; Metabolic panel 20 ... Chernecky CC, Berger BJ. Comprehensive metabolic panel (CMP) - blood. In: ... Tests and Diagnostic Procedures . 6th ed. St Louis, MO: ...

Noise Reduction in Double‿Panel Structures by Cavity and Panel Resonance Control

NARCIS (Netherlands)

Ho, J.; Berkhoff, Arthur P.

2011-01-01

This paper presents an investigation of the cavity and the panel resonance control in a double‿panel structure. The double‿panel structure, which consists of two panels with air in the gap, is widely adopted in many applications such as aerospace due to its light weight and effective

Noise reduction in double-panel structures by cavity and panel resonance control

NARCIS (Netherlands)

Ho, J.-H.; Berkhoff, A.P

2011-01-01

This paper presents an investigation of the cavity and the panel resonance control in a double‐panel structure. The double‐panel structure, which consists of two panels with air in the gap, is widely adopted in many applications such as aerospace due to its light weight and effective

Aerospace Safety Advisory Panel Annual Report for 1999

Science.gov (United States)

Blomberg, Richard D.

2000-01-01

recommendations in this report do not highlight any major, immediate issues that might compromise the safe pursuit of the various NASA programs. They do, however, cover concerns that the Panel believes should be addressed in the interest of maintaining NASA's excellent safety record.The Panel is pleased to note that remedial efforts for some of the findings raised are underway. Given appropriate funding and cooperative efforts among the Administration, the Congress and the various contractors, the Panel is convinced that safety problems can be avoided or solved resulting in lower risk for NASA's human space and aeronautics programs. Section II of this report contains specific findings and recommendations generated by Panel activities during the calendar year 1999. Section III presents more detailed information in support of these findings and recommendations. A current roster of Panel members, consultants, and staff is included as Appendix A. Appendix B contains NASA's response to the findings and recommendations from the 1998 annual report. It has been augmented this year to include brief explanations of why the Panel classified the NASA response as " open,""continuing," or "closed." Appendix C lists the fact-finding activities of the Panel in 1999.

PERBANDINGAN UNJUK KERJA ANTARA PANEL SEL SURYA BERPENJEJAK DENGAN PANEL SEL SURYA DIAM

Directory of Open Access Journals (Sweden)

Syafaruddin Ch

2010-07-01

Full Text Available The ability to produce electrical energy at Solar Power Plant  is highly dependent on the magnitude and duration of sun exposure on the solar cell panels. The movement of the sun from east to west that periodicity in every day is a problem at  the  optimization generation of electricity at  Solar Power Plant   if using solar panel that motionless. This is because the solar cell panel can not catch the maximum sun exposure. To solve the above problem then designed a solar cell panel  tracker  capable of follo-wing the movements of the sun. Then conducted a test to see the performance of solar cell pa-nel  tracker  and compare it with the performance of solar cell panel was motionless. The testing doing along 6 days, with way to irradiate the panel of solar cells  tracker  and panels of solar cell motionless with sun exposure  along a  full day. Then the electric current generated each panel were recorded. The comparison of current then generating comparison of electric power delivery. The result show that the solar cell panel  tracker  produce the average current is 2.19 A whereas solar-cell panel still 1.97 A.  This result   indicate that average power for solar cell panel  tracker  39.41 W while for solar cell panel that motionless is  35.46 W. These results indicate that the performance of solar cell panel  tracker  better than  solar cell panel motionless.

Noise Reduction in Double‿Panel Structures by Cavity and Panel Resonance Control

OpenAIRE

Ho, J.; Berkhoff, Arthur P.

2011-01-01

This paper presents an investigation of the cavity and the panel resonance control in a double‿panel structure. The double‿panel structure, which consists of two panels with air in the gap, is widely adopted in many applications such as aerospace due to its light weight and effective transmission‿loss at high frequency. However, the resonance of the cavity and the poor transmission‿loss at low frequency limit its noise control performance. Applying active control forces on the panels or utili...

Some considerations for establishing seismic design criteria for nuclear plant piping

International Nuclear Information System (INIS)

Chen, W.P.; Chokshi, N.C.

1997-01-01

The Energy Technology Engineering Center (ETEC) is providing assistance to the U.S. NRC in developing regulatory positions on the seismic analysis of piping. As part of this effort, ETEC previously performed reviews of the ASME Code, Section III piping seismic design criteria as revised by the 1994 Addenda. These revised criteria were based on evaluations by the ASME Special Task Group on Integrated Piping Criteria (STGIPC) and the Technical Core Group (TCG) of the Advanced Reactor Corporation (ARC) of the earlier joint Electric Power Research Institute (EPRI)/NRC Piping ampersand Fitting Dynamic Reliability (PFDR) program. Previous ETEC evaluations reported at the 23rd WRSM of seismic margins associated with the revised criteria are reviewed. These evaluations had concluded, in part, that although margins for the timed PFDR tests appeared acceptable (>2), margins in detuned tests could be unacceptable (<1). This conclusion was based primarily on margin reduction factors (MRFs) developed by the ASME STGIPC and ARC/TCG from realistic analyses of PFDR test 36. This paper reports more recent results including: (1) an approach developed for establishing appropriate seismic margins based on PRA considerations, (2) independent assessments of frequency effects on margins, (3) the development of margins based on failure mode considerations, and (4) the implications of Code Section III rules for Section XI

Design Guidelines and Criteria for User/Operator Transactions with Battlefield Automated Systems. Volume III-A. Human Factors Analyses of User/ Operator Transactions with TACFIRE - The Tactical Fire Direction System

Science.gov (United States)

1981-02-01

7. Reseaarch Product 81-26 - DESIGN GUIDELINES AND CRITERIA FOR USER/ I;. I’OPERATOR TRANSACTIONS WITH BATTLEFIELD AUTOMIATED SYSTEMS I’ /HVtAN...FACTORS XWLYSES :’F K~R/ OPERATOR TRANSACTIONS WTHT TACFIRE - THE TACTICAL FIRE DiRECTION SY2T3EM A HUMAN FACTORS TECHNICAL AREA L~h~h K L-J 1’ U~~i~ ll...Battlefield Auto- Inter : Oct 1979-Feb 1981 mated Systems Volume III-A: Human Factors 4t C/ Analyses of User/Operator Transactions with 6. PERFORMING

Review of flat panel display programs and defense applications

Science.gov (United States)

Gnade, Bruce; Schulze, Raymond; Henderson, Girardeau L.; Hopper, Darrel G.

1997-07-01

Flat panel display research has comprised a substantial portion of the national investment in new technology for economic and national security for the past nine years. These investments have ben made principally via several Defense Advanced Research Projects Agency (DARPA) programs, known collectively as the continuing High Definition Systems Program, and the Office of the Secretary of Defense Production Act Title III Program. Using input from the Army, Navy, and Air Force to focus research and identify insertion opportunities, DARPA and the Title III Program Office have made investments to develop the national technology base and manufacturing infrastructure necessary to meet the twin challenge of providing affordable displays in current systems and enabling the DoD strategy of winning future conflicts by getting more information to all participants during the battle. These research programs are reviewed and opportunities for applications are described. Future technology development, transfer, and transition requirements are identified. Strategy and vision are documented to assist the identification of areas meriting further consideration.

THE FRAMEWORK RESULTING FROM THE BASEL III REGULATIONS

Directory of Open Access Journals (Sweden)

Motocu Marius

2013-07-01

The Basel III criteria entering into force between 2013 and 2018 constitute one of the major challenges to which the banking sector will face. The real impact of the Basel III reform will depend on the attitude of the banks that will have to change in their strategy, their cost structure and policy of remuneration of the shareholders. A reform which will have therefore an impact on the world economy ensuring as estimated by Governors and supervisors, stability and long term economic performance. This paper will present the main adjustments proposed by the Basel Committee.

Initial Readability Assessment of Clinical Trial Eligibility Criteria

Science.gov (United States)

Kang, Tian; Elhadad, Noémie; Weng, Chunhua

2015-01-01

Various search engines are available to clinical trial seekers. However, it remains unknown how comprehensible clinical trial eligibility criteria used for recruitment are to a lay audience. This study initially investigated this problem. Readability of eligibility criteria was assessed according to (i) shallow and lexical characteristics through the use of an established, generic readability metric; (ii) syntactic characteristics through natural language processing techniques; and (iii) health terminological characteristics through an automated comparison to technical and lay health texts. We further stratified clinical trials according to various study characteristics (e.g., source country or study type) to understand potential factors influencing readability. Mainly caused by frequent use of technical jargons, a college reading level was found to be necessary to understand eligibility criteria text, a level much higher than the average literacy level of the general American population. The use of technical jargons should be minimized to simplify eligibility criteria text. PMID:26958204

Paneling architectural freeform surfaces

KAUST Repository

Eigensatz, Michael

2010-07-25

The emergence of large-scale freeform shapes in architecture poses big challenges to the fabrication of such structures. A key problem is the approximation of the design surface by a union of patches, so-called panels, that can be manufactured with a selected technology at reasonable cost, while meeting the design intent and achieving the desired aesthetic quality of panel layout and surface smoothness. The production of curved panels is mostly based on molds. Since the cost of mold fabrication often dominates the panel cost, there is strong incentive to use the same mold for multiple panels. We cast the major practical requirements for architectural surface paneling, including mold reuse, into a global optimization framework that interleaves discrete and continuous optimization steps to minimize production cost while meeting user-specified quality constraints. The search space for optimization is mainly generated through controlled deviation from the design surface and tolerances on positional and normal continuity between neighboring panels. A novel 6-dimensional metric space allows us to quickly compute approximate inter-panel distances, which dramatically improves the performance of the optimization and enables the handling of complex arrangements with thousands of panels. The practical relevance of our system is demonstrated by paneling solutions for real, cutting-edge architectural freeform design projects.

Paneling architectural freeform surfaces

KAUST Repository

Eigensatz, Michael

2010-07-26

The emergence of large-scale freeform shapes in architecture poses big challenges to the fabrication of such structures. A key problem is the approximation of the design surface by a union of patches, socalled panels, that can be manufactured with a selected technology at reasonable cost, while meeting the design intent and achieving the desired aesthetic quality of panel layout and surface smoothness. The production of curved panels is mostly based on molds. Since the cost of mold fabrication often dominates the panel cost, there is strong incentive to use the same mold for multiple panels. We cast the major practical requirements for architectural surface paneling, including mold reuse, into a global optimization framework that interleaves discrete and continuous optimization steps to minimize production cost while meeting user-specified quality constraints. The search space for optimization is mainly generated through controlled deviation from the design surface and tolerances on positional and normal continuity between neighboring panels. A novel 6-dimensional metric space allows us to quickly compute approximate inter-panel distances, which dramatically improves the performance of the optimization and enables the handling of complex arrangements with thousands of panels. The practical relevance of our system is demonstrated by paneling solutions for real, cutting-edge architectural freeform design projects. © 2010 ACM.

Ethical evaluation of research proposals by ethics panels advising the European Commission.

Science.gov (United States)

Kolar, Roman

2004-06-01

Ethical principles with regard to animal experimentation are referred to in European Union (EU) legislation and other official documents. Therefore, applications for funding of research under the EU's research programme may undergo an ethical review that is carried out by so-called ethics panels, consisting of experts chosen by the European Commission. The work of these panels differs substantially from that of other ethical committees, as they exist on the institutional, local, regional or national level. Their main purpose is not to decide whether a proposed research can be regarded legal, and therefore should be endorsed or licensed; instead, it is to help the Commission in prioritising its funding. The panels may examine other ethical aspects than those of animal experimentation or animal welfare alone, such as the use of human volunteers. This is reflected by the composition of the panels. Their decisions are normally based on consensus. Even though these decisions may refer to EU legislation, the criteria applied are not restricted to those provided by this legislation. Nevertheless, the various aspects of the Commission's ethical evaluation system (e.g. formal and practical basic conditions, information content of applications, type of decisions taken, lacking of any quality control) offers opportunities for improvement.

Regulatory Safety Issues in the Structural Design Criteria of ASME Section III Subsection NH and for Very High Temperatures for VHTR and GEN IV

International Nuclear Information System (INIS)

O'Donnell, William J.; Griffin, Donald S.

2007-01-01

The objective of this task is to identify issues relevant to ASME Section III, Subsection NH [1], and related Code Cases that must be resolved for licensing purposes for VHTGRs (Very High Temperature Gas Reactor concepts such as those of PBMR, Areva, and GA); and to identify the material models, design criteria, and analysis methods that need to be added to the ASME Code to cover the unresolved safety issues. Subsection NH was originally developed to provide structural design criteria and limits for elevated-temperature design of Liquid Metal Fast Breeder Reactor (LMFBR) systems and some gas-cooled systems. The U.S. Nuclear Regulatory Commission (NRC) and its Advisory Committee for Reactor Safeguards (ACRS) reviewed the design limits and procedures in the process of reviewing the Clinch River Breeder Reactor (CRBR) for a construction permit in the late 1970s and early 1980s, and identified issues that needed resolution. In the years since then, the NRC and various contractors have evaluated the applicability of the ASME Code and Code Cases to high-temperature reactor designs such as the VHTGRs, and identified issues that need to be resolved to provide a regulatory basis for licensing. This Report describes: (1) NRC and ACRS safety concerns raised during the licensing process of CRBR , (2) how some of these issues are addressed by the current Subsection NH of the ASME Code; and (3) the material models, design criteria, and analysis methods that need to be added to the ASME Code and Code Cases to cover unresolved regulatory issues for very high temperature service.

Panel 5: Microbiology and Immunology Panel

Science.gov (United States)

Murphy, Timothy F.; Chonmaitree, Tasnee; Barenkamp, Stephen; Kyd, Jennelle; Nokso-Koivisto, Johanna; Patel, Janak A.; Heikkinen, Terho; Yamanaka, Noboru; Ogra, Pearay; Swords, W. Edward; Sih, Tania; Pettigrew, Melinda M.

2014-01-01

Objective The objective is to perform a comprehensive review of the literature from January 2007 through June 2011 on the virology, bacteriology, and immunology related to otitis media. Data Sources PubMed database of the National Library of Medicine. Review Methods Three subpanels with co-chairs comprising experts in the virology, bacteriology, and immunology of otitis media were formed. Each of the panels reviewed the literature in their respective fields and wrote draft reviews. The reviews were shared with all panel members, and a second draft was created. The entire panel met at the 10th International Symposium on Recent Advances in Otitis Media in June 2011 and discussed the review and refined the content further. A final draft was created, circulated, and approved by the panel. Conclusion Excellent progress has been made in the past 4 years in advancing an understanding of the microbiology and immunology of otitis media. Advances include laboratory-based basic studies, cell-based assays, work in animal models, and clinical studies. Implications for Practice The advances of the past 4 years formed the basis of a series of short-term and long-term research goals in an effort to guide the field. Accomplishing these goals will provide opportunities for the development of novel interventions, including new ways to better treat and prevent otitis media. PMID:23536533

The Impact of Basel III on European Banks

OpenAIRE

Šútorová, Barbora

2013-01-01

The aim of this thesis is to take a closer look on how the stricter capital requirements defined in the Basel III framework will influence European banks from a complex point of view - lending rates and volumes of provided loans, profitability, risk taking and market value of banks. Our analysis employing simultaneous equations and panel data models on exp post data on almost 600 banks operating in the EU in the 2005-2011 period reports following results: (1) Those banks that will be forced t...

Diabetic neuropathies: update on definitions, diagnostic criteria, estimation of severity, and treatments

DEFF Research Database (Denmark)

Tesfaye, Solomon; Boulton, Andrew J M; Dyck, Peter J

2010-01-01

Preceding the joint meeting of the 19th annual Diabetic Neuropathy Study Group of the European Association for the Study of Diabetes (NEURODIAB) and the 8th International Symposium on Diabetic Neuropathy in Toronto, Canada, 13-18 October 2009, expert panels were convened to provide updates on cla...... on classification, definitions, diagnostic criteria, and treatments of diabetic peripheral neuropathies (DPNs), autonomic neuropathy, painful DPNs, and structural alterations in DPNs.......Preceding the joint meeting of the 19th annual Diabetic Neuropathy Study Group of the European Association for the Study of Diabetes (NEURODIAB) and the 8th International Symposium on Diabetic Neuropathy in Toronto, Canada, 13-18 October 2009, expert panels were convened to provide updates...

A multi-criteria evaluation method for climate change mitigation policy instruments

International Nuclear Information System (INIS)

Konidari, Popi; Mavrakis, Dimitrios

2007-01-01

This paper presents an integrated multi-criteria analysis method for the quantitative evaluation of climate change mitigation policy instruments. The method consists of: (i) a set of criteria supported by sub-criteria, all of which describe the complex framework under which these instruments are selected by policy makers and implemented, (ii) an Analytical Hierarchy Process (AHP) process for defining weight coefficients for criteria and sub-criteria according to the preferences of three stakeholders groups and (iii) a Multi-Attribute Theory (MAUT)/Simple Multi-Attribute Ranking Technique (SMART) process for assigning grades to each instrument that is evaluated for its performance under a specific sub-criterion. Arguments for the selected combination of these standard methods and definitions for criteria/sub-criteria are quoted. Consistency and robustness tests are performed. The functionality of the proposed method is tested by assessing the aggregate performances of the EU emission trading scheme at Denmark, Germany, Greece, Italy, Netherlands, Portugal, Sweden and United Kingdom. Conclusions are discussed

Comparisons between various cavity and panel noise reduction control in double-panel structures

NARCIS (Netherlands)

Ho, J.H.; Kalverboer, J.; Berkhoff, A.P.

2012-01-01

This paper presents comparisons between various panel and cavity resonance control methods to reduce the transmitted sound in a double-panel structure. The double-panel, which consists of two panels with air in the gap, has the advantages of low weight and effective transmission-loss at high

State-of-art report III/1984 (June 29 to November 27, 1984)

International Nuclear Information System (INIS)

1985-01-01

The state-of-art report III/1984 gives a survey of the activities of the Nuclear Committee (KTA) and its panels and of KTA regulation projects in the period between the 35th and 36th KTA meeting. The state-of-art report is designed to give fast, synoptical, adequate information on the current state of KTA work. With regulation projects, data which are subject to miner variations only, for instance concerning the contents or organization of a regulation project, data on the flow of work, members of the panels, are included in the KTA manual. In case of alterations, the data in the KTA manual are updated by replacing the respective pages. (orig./HP) [de

Metabolic syndrome in obese adolescents: what is enough? Síndrome metabólica em adolescentes obesos: o que é suficiente?

Directory of Open Access Journals (Sweden)

Leticia Esposito Sewaybricker

2013-02-01

Full Text Available OBJECTIVE: To study the agreement among three distinct criteria for metabolic syndrome (MS adapted to adolescents, and to identify associated factors for MS. METHODS: Cross-sectional study with 65 obese subjects aged 10 to 18 years, attended to at the Outpatient Clinic for Obese Children and Adolescents at the Clinical Hospital of the Universidade Estadual de Campinas (Unicamp. MS was defined using the criteria of the World Health Organization (WHO, the International Diabetes Federation (IDF, and the Adult Treatment Panel III (ATP III. Clinical, anthropometrical, and laboratorial data were associated to MS. RESULTS: From the 65 subjects, none had MS according to the WHO criteria, while 18 were diagnosed with MS (27.6% according to the IDF, and 19 (29.2% according to the ATP III. Agreement between IDF and ATP III was excellent (kappa 81%. In this study, puberty and triglycerides levels showed significant statistical difference when comparing subjects with and without MS, the first for ATP III (p = 0.03, and the second for IDF (p = 0.005 and ATP III (p = 0.001 criteria. CONCLUSION: The WHO criteria does not seem to be adequate for adolescents. IDF and ATP III criteria had an excellent agreement. Puberty and triglycerides were associated with MS.OBJETIVO: Avaliar a correlação de três critérios de síndrome metabólica (SM para adolescentes e identificar fatores associados. MÉTODOS: Estudo transversal com 65 pacientes obesos entre 10 e 18 anos do Ambulatório de Crianças e Adolescentes Obesos do HC-Unicamp. SM foi definida de acordo com a Organização Mundial da Saúde (OMS, International Diabetes Federation (IDF e Adult Treatment Panel III (ATP III. Buscaram-se fatores associados a SM em dados clínicos, antropométricos e laboratoriais. RESULTADOS: Dos 65 pacientes, nenhum foi diagnosticado como SM pela OMS, sendo 18 (27.6% pelo IDF e 19 (29.2% pelo ATP III. A correlação entre IDF e ATP III foi excelente (kappa 81%. Neste estudo, a

Solar reflection panels

Science.gov (United States)

Diver, Jr., Richard B.; Grossman, James W [Albuquerque, NM; Reshetnik, Michael [Boulder, CO

2006-07-18

A solar collector comprising a glass mirror, and a composite panel, wherein the back of the mirror is affixed to a front surface of the composite panel. The composite panel comprises a front sheet affixed to a surface of a core material, preferably a core material comprising a honeycomb structure, and a back sheet affixed to an opposite surface of the core material. The invention may further comprise a sealing strip, preferably comprising EPDM, positioned between the glass mirror and the front surface of the composite panel. The invention also is of methods of making such solar collectors.

Varying Coefficient Panel Data Model in the Presence of Endogenous Selectivity and Fixed Effects

OpenAIRE

Malikov, Emir; Kumbhakar, Subal C.; Sun, Yiguo

2013-01-01

This paper considers a flexible panel data sample selection model in which (i) the outcome equation is permitted to take a semiparametric, varying coefficient form to capture potential parameter heterogeneity in the relationship of interest, (ii) both the outcome and (parametric) selection equations contain unobserved fixed effects and (iii) selection is generalized to a polychotomous case. We propose a two-stage estimator. Given consistent parameter estimates from the selection equation obta...

Finding and engaging patients and the public to work collaboratively on an acute infection microbiology research public panel.

Science.gov (United States)

Grier, Sally; Evans, David; Gibson, Andy; Chin, Teh Li; Stoddart, Margaret; Kok, Michele; Campbell, Richard; Kenny, Val; MacGowan, Alasdair

2018-01-01

In 2015 a microbiology team in Bristol joined a European research project that aims to develop new antibiotics to fight drug resistant infections. The microbiology team were convinced of the benefits of patient and public involvement, but had found it difficult to find former patients to work with on earlier microbiology research. This paper describes how the team overcame this challenge to successfully recruit a PPI panel to develop PPI within the European project.The advice from people with experience in public involvement was to decide what criteria were desirable for panel membership, think about what the work of the panel might involve and how long the project will go on. The team decided that experience of suffering a serious acute infection would qualify people to comment on this project. Next, the team needed to identify ways of finding people to join the PPI panel.The microbiology research team tried different ways to approach potential panel members. These included distributing flyers at public research events, sending emails to potentially interested people, posting a message on the hospital Facebook page and approaching eligible people known to the team. A direct approach was the most successful method - either by email, mail or in person. Ultimately 16 people were selected to form the panel. Key factors for success were planning what the work of the panel might be, perseverance despite early lack of success, and one person having overall responsibility for setting up the panel, with the support of the whole team. Background In 2015 the microbiology research team became involved in a large European programme of research aiming to bring new antimicrobial drugs onto the market to combat the increasing problem of multi-drug resistant infection. With the purpose of developing patient and public involvement (PPI) in this project, the team decided to recruit a PPI panel to work with. The microbiology team had previously worked with a PPI panel on other

Proficiency testing for sensory profile panels : measuring panel performance

NARCIS (Netherlands)

Mcewan, J.A.; Hunter, E.A.; Gemert, L.J. van; Lea, P.

2002-01-01

Proficiency testing in sensory analysis is an important step towards demonstrating that results from one sensory panel are consistent with the results of other sensory panels. The uniqueness of sensory analysis poses some specific problems for measuring the proficiency of the human instrument

Experimental study of discharging PCM ceiling panels through nocturnal radiative cooling

DEFF Research Database (Denmark)

Bourdakis, Eleftherios; Péan, Thibault Q.; Gennari, Luca

PhotoVoltaic/Thermal (PV/T) panels were used for cooling water through the principle of nocturnal radiative cooling. This water was utilised for discharging Phase Change Material (PCM) which was embedded in ceiling panels in a climate chamber. Three different sets of flow rates were examined...... for the solar and the PCM loops, for five days each. The highest examined water flow rate (210 l/h) in the PCM loop provided the best thermal environment in the climate chamber, namely 92% of the occupancy time was within the range of Category III of Standard EN 15251. Although the lowest examined water flow...... rate (96 l/h) in the solar loop provided the highest average cooling power, due to the significant variations in the weather conditions during the three experimental cases, made it impossible to determine to which extent the difference in the cooling power is due to the different water flow rate...

Application fuzzy multi-attribute decision analysis method to prioritize project success criteria

Science.gov (United States)

Phong, Nguyen Thanh; Quyen, Nguyen Le Hoang Thuy To

2017-11-01

Project success is a foundation for project owner to manage and control not only for the current project but also for future potential projects in construction companies. However, identifying the key success criteria for evaluating a particular project in real practice is a challenging task. Normally, it depends on a lot of factors, such as the expectation of the project owner and stakeholders, triple constraints of the project (cost, time, quality), and company's mission, vision, and objectives. Traditional decision-making methods for measuring the project success are usually based on subjective opinions of panel experts, resulting in irrational and inappropriate decisions. Therefore, this paper introduces a multi-attribute decision analysis method (MADAM) for weighting project success criteria by using fuzzy Analytical Hierarchy Process approach. It is found that this method is useful when dealing with imprecise and uncertain human judgments in evaluating project success criteria. Moreover, this research also suggests that although cost, time, and quality are three project success criteria projects, the satisfaction of project owner and acceptance of project stakeholders with the completed project criteria is the most important criteria for project success evaluation in Vietnam.

Fine specificity and cross-reactions of monoclonal antibodies to group B streptococcal capsular polysaccharide type III

DEFF Research Database (Denmark)

Pincus, Seth H; Moran, Emily; Maresh, Grace

2012-01-01

) is considered the dominant "protective" immune mediator. Here we study the fine specificity and potential host reactivity of a panel of well-characterized murine monoclonal Abs against the type III CPS by examining the binding of the Abs to intact and neuraminidase-digested GBS, purified CPS, synthetic...

Large thermal protection system panel

Science.gov (United States)

Weinberg, David J. (Inventor); Myers, Franklin K. (Inventor); Tran, Tu T. (Inventor)

2003-01-01

A protective panel for a reusable launch vehicle provides enhanced moisture protection, simplified maintenance, and increased temperature resistance. The protective panel includes an outer ceramic matrix composite (CMC) panel, and an insulative bag assembly coupled to the outer CMC panel for isolating the launch vehicle from elevated temperatures and moisture. A standoff attachment system attaches the outer CMC panel and the bag assembly to the primary structure of the launch vehicle. The insulative bag assembly includes a foil bag having a first opening shrink fitted to the outer CMC panel such that the first opening and the outer CMC panel form a water tight seal at temperatures below a desired temperature threshold. Fibrous insulation is contained within the foil bag for protecting the launch vehicle from elevated temperatures. The insulative bag assembly further includes a back panel coupled to a second opening of the foil bag such that the fibrous insulation is encapsulated by the back panel, the foil bag, and the outer CMC panel. The use of a CMC material for the outer panel in conjunction with the insulative bag assembly eliminates the need for waterproofing processes, and ultimately allows for more efficient reentry profiles.

Reflecting variable opening insulating panel

International Nuclear Information System (INIS)

Nungesser, W.T.

1976-01-01

A description is given of a reflecting variable opening insulating panel assembly, comprising a static panel assembly of reflecting insulation sheets forming a cavity along one side of the panel and a movable panel opening out by sliding from the cavity of the static panel, and a locking device for holding the movable panel in a position extending from the cavity of the static panel. This can apply to a nuclear reactor of which the base might require maintenance and periodical checking and for which it is desirable to have available certain processes for the partial dismantling of the insulation [fr

Comparison of diagnostic classification systems for delirium with new research criteria that incorporate the three core domains.

Science.gov (United States)

Trzepacz, Paula T; Meagher, David J; Franco, José G

2016-05-01

Diagnostic classification systems do not incorporate phenomenological research findings about the three core symptom domains of delirium (Attentional/Cognitive, Circadian, Higher Level Thinking). We evaluated classification performances of novel Trzepacz, Meagher, and Franco research diagnostic criteria (TMF) that incorporate those domains and ICD-10, DSM-III-R, DSM-IV, and DSM-5. Primary data analysis of 641 patients with mixed neuropsychiatric profiles. Delirium (n=429) and nondelirium (n=212) reference standard groups were identified using cluster analysis of symptoms assessed using the Delirium Rating Scale-Revised-98. Accuracy, sensitivity, specificity, positive and negative predictive values (PPV, NPV), and likelihood ratios (LR+, LR-) are reported. TMF criteria had high sensitivity and specificity (87.4% and 89.2%), more balanced than DSM-III-R (100% and 31.6%), DSM-IV (97.7% and 74.1%), DSM-5 (97.7% and 72.6%), and ICD-10 (66.2% and 100%). PPV of DSM-III-R, DSM-IV, and DSM-5 were 90%. ICD-10 had the lowest NPV (59.4%). TMF had the highest LR+ (8.06) and DSM-III-R the lowest LR- (0.0). Overall, values for DSM-IV and DSM-5 were similar, whereas for ICD-10 and DSM-III-R were inverse of each other. In the pre-existing cognitive impairment/dementia subsample (n=128), TMF retained its highest LR+ though specificity (58.3%) became less well balanced with sensitivity (87.9%), which still exceeded that of DSM. TMF research diagnostic criteria performed well, with more balanced sensitivity and specificity and the highest likelihood ratio for delirium identification. Reflecting the three core domains of delirium, TMF criteria may have advantages in biological research where delineation of this syndrome is important. Copyright © 2016. Published by Elsevier Inc.

Image interpretation criteria for FDG PET/CT in multiple myeloma: a new proposal from an Italian expert panel. IMPeTUs (Italian Myeloma criteria for PET USe)

Energy Technology Data Exchange (ETDEWEB)

Nanni, Cristina; Rambaldi, Ilaria; Fanti, Stefano [AOU Policlinico S. Orsola-Malpighi, Nuclear Medicine, Bologna (Italy); Zamagni, Elena; Cavo, Michele [AOU Policlinico S. Orsola-Malpighi, Hematology, Bologna (Italy); Versari, Annibale [IRCSS, Nuclear Medicine, S. Maria Nuova Hospital, Reggio Emilia (Italy); Chauvie, Stephane [Santa Croce e Carle Hospital, Medical Physics Unit, Cuneo (Italy); Bianchi, Andrea [Santa Croce e Carle Hospital, Nuclear Medicine, Cuneo (Italy); Rensi, Marco [AOU S.Maria della Misericordia, Nuclear Medicine, Udine (Italy); Bello, Marilena [AO Citta della Salute e della Scienza, Nuclear Medicine, Torino (Italy); Gallamini, Andrea [A Lacassagne Cancer Center, Research and Innovation Department, Nice (France); Patriarca, Francesca [Udine University, Hematologic Clinic, Udine (Italy); Gay, Francesca [University of Torino, Myeloma Unit, Division of Hematology, Torino (Italy); Gamberi, Barbara [IRCCS, Hematology Unit, Azienda Ospedaliera ASMN, Reggio Emilia (Italy)

2016-03-15

FDG PET/CT is able to detect active disease in patients with multiple myeloma (MM) and can be helpful for staging and assessing therapy response, but no standard interpretation criteria have been proposed for the evaluation of FDG PET/CT in MM. A group of Italian nuclear medicine physicians and haematologists met to propose new visual interpretation criteria to standardize FDG PET/CT evaluation in MM patients (Italian Myeloma criteria for PET USe; IMPeTUs) and the reproducibility of these criteria was tested. This Italian multicentre protocol was set up as a subprotocol of EMN02, an international prospective multicentre trial of the European Myeloma Network. The criteria were agreed at multidisciplinary consensus meetings. They include a description of the metabolic state of the bone marrow (BM), number and site of focal PET-positive lesions, the number of osteolytic lesions, and the presence and site of extramedullary disease, paramedullary disease and fractures. A visual degree of uptake was defined for the target lesion and extramedullary lesions according to modified Deauville criteria. MM patients who had undergone FDG PET/CT at baseline (PET-0), after induction (PET-AI) and at the end of treatment (PET-EoT) were enrolled. The patients had been prospectively enrolled in EMN02 and their PET scans were a posteriori reinterpreted in a blinded independent central review process managed by WIDEN registered. Five expert nuclear medicine physicians scored the scans according to the new criteria. A case was considered read when four out of the five reviewers completed the report. Concordance among reviewers on different metrics was calculated using Krippendorff's alpha coefficient. A total of 17 consecutive patients were enrolled. On PET-0, the alpha coefficients for the BM score, the score for the hottest focal lesion, the number of focal lesions and the number of lytic lesions were 0.33 and 0.47, 0.40 and 0.32, respectively. On PET-AI, the alpha coefficients

Image interpretation criteria for FDG PET/CT in multiple myeloma: a new proposal from an Italian expert panel. IMPeTUs (Italian Myeloma criteria for PET USe)

International Nuclear Information System (INIS)

Nanni, Cristina; Rambaldi, Ilaria; Fanti, Stefano; Zamagni, Elena; Cavo, Michele; Versari, Annibale; Chauvie, Stephane; Bianchi, Andrea; Rensi, Marco; Bello, Marilena; Gallamini, Andrea; Patriarca, Francesca; Gay, Francesca; Gamberi, Barbara

2016-01-01

FDG PET/CT is able to detect active disease in patients with multiple myeloma (MM) and can be helpful for staging and assessing therapy response, but no standard interpretation criteria have been proposed for the evaluation of FDG PET/CT in MM. A group of Italian nuclear medicine physicians and haematologists met to propose new visual interpretation criteria to standardize FDG PET/CT evaluation in MM patients (Italian Myeloma criteria for PET USe; IMPeTUs) and the reproducibility of these criteria was tested. This Italian multicentre protocol was set up as a subprotocol of EMN02, an international prospective multicentre trial of the European Myeloma Network. The criteria were agreed at multidisciplinary consensus meetings. They include a description of the metabolic state of the bone marrow (BM), number and site of focal PET-positive lesions, the number of osteolytic lesions, and the presence and site of extramedullary disease, paramedullary disease and fractures. A visual degree of uptake was defined for the target lesion and extramedullary lesions according to modified Deauville criteria. MM patients who had undergone FDG PET/CT at baseline (PET-0), after induction (PET-AI) and at the end of treatment (PET-EoT) were enrolled. The patients had been prospectively enrolled in EMN02 and their PET scans were a posteriori reinterpreted in a blinded independent central review process managed by WIDEN registered. Five expert nuclear medicine physicians scored the scans according to the new criteria. A case was considered read when four out of the five reviewers completed the report. Concordance among reviewers on different metrics was calculated using Krippendorff's alpha coefficient. A total of 17 consecutive patients were enrolled. On PET-0, the alpha coefficients for the BM score, the score for the hottest focal lesion, the number of focal lesions and the number of lytic lesions were 0.33 and 0.47, 0.40 and 0.32, respectively. On PET-AI, the alpha coefficients

International consensus diagnostic criteria for neuromyelitis optica spectrum disorders

Science.gov (United States)

Banwell, Brenda; Bennett, Jeffrey L.; Cabre, Philippe; Carroll, William; Chitnis, Tanuja; de Seze, Jérôme; Fujihara, Kazuo; Greenberg, Benjamin; Jacob, Anu; Jarius, Sven; Lana-Peixoto, Marco; Levy, Michael; Simon, Jack H.; Tenembaum, Silvia; Traboulsee, Anthony L.; Waters, Patrick; Wellik, Kay E.

2015-01-01

Neuromyelitis optica (NMO) is an inflammatory CNS syndrome distinct from multiple sclerosis (MS) that is associated with serum aquaporin-4 immunoglobulin G antibodies (AQP4-IgG). Prior NMO diagnostic criteria required optic nerve and spinal cord involvement but more restricted or more extensive CNS involvement may occur. The International Panel for NMO Diagnosis (IPND) was convened to develop revised diagnostic criteria using systematic literature reviews and electronic surveys to facilitate consensus. The new nomenclature defines the unifying term NMO spectrum disorders (NMOSD), which is stratified further by serologic testing (NMOSD with or without AQP4-IgG). The core clinical characteristics required for patients with NMOSD with AQP4-IgG include clinical syndromes or MRI findings related to optic nerve, spinal cord, area postrema, other brainstem, diencephalic, or cerebral presentations. More stringent clinical criteria, with additional neuroimaging findings, are required for diagnosis of NMOSD without AQP4-IgG or when serologic testing is unavailable. The IPND also proposed validation strategies and achieved consensus on pediatric NMOSD diagnosis and the concepts of monophasic NMOSD and opticospinal MS. PMID:26092914

Puncture panel optimization

International Nuclear Information System (INIS)

Glass, R.E.; Longenbaugh, R.S.

1986-01-01

Sandia National Laboratories developed the TRansUranic PACkage Transporter (TRUPACT) to transport defense contact-handled transuranic wastes. The package has been designed to meet the normal and hypothetical accident conditions in 10CFR71 which includes the demonstrated ability to survive a 1-meter drop onto a mild steel pin. The puncture protection is provided by puncture resistant panels. In conjunction with the development of TRUPACT, a series of experiments has been conducted to reduce the weight of the puncture resistant panels. The initial scoping tests resulted in a preliminary design incorporating 30 layers of Kevlar. This design has been shown to meet the regulatory puncture test. To reduce the weight of this panel, subscale tests were conducted on panels utilizing Kevlar yarns with varying mass per unit length (denier) as well as different resins. This paper reviews the testing undertaken in the original panel development and discusses the results obtained from the recent subscale and full-scale optimization tests

Cavity Control and Panel Control Strategies in Double-Panel Structures for Transmitted Noise Reduction

NARCIS (Netherlands)

Ho, J.; Kalverboer, J.; Berkhoff, Arthur P.

2012-01-01

Investigation and comparisons of the cavity control and the panel control in a double-panel structure are presented in this paper. The double-panel structure, which comprises two panels with air in the gap, provides the advantages of low sound-transmission at high frequency, low heat-transmission

Hepatic (Liver) Function Panel

Science.gov (United States)

... Educators Search English Español Blood Test: Hepatic (Liver) Function Panel KidsHealth / For Parents / Blood Test: Hepatic (Liver) ... kidneys ) is working. What Is a Hepatic (Liver) Function Panel? A liver function panel is a blood ...

Panel Resonance Control and Cavity Control in Double-Panel Structures for Active Noise Reduction

NARCIS (Netherlands)

Ho, J.; Berkhoff, Arthur P.

2011-01-01

An analytical and experimental investigation of panel resonance control and cavity control in a double-panel structure is presented in this paper. The double-panel structure, which consists of two panels with air in the gap, is widely adopted in many applications such as aerospace due to its low

EFSA CEF Panel (EFSA Panel on Food Contact Materials, Enzymes, Flavourings and Processing Aids), 2014. Scientific Opinion on Flavouring Group Evaluation 304, Revision 1 (FGE.304Rev1): Four carboxamides from Chemical Groups 30

DEFF Research Database (Denmark)

Beltoft, Vibe Meister; Binderup, Mona-Lise; Frandsen, Henrik Lauritz

The Panel on Food Contact Materials, Enzymes, Flavourings and Processing Aids of the European Food Safety Authority was requested to evaluate four flavouring substances in the Flavouring Group Evaluation 304, Revision 1 (FGE.304Rev1) using the Procedure in Commission Regulation (EC) No 1565...... criteria and identity for the materials of commerce have been provided for all four candidate substances....

Nitrato-complexes of Y(III), La(III), Ce(III), Pr(III), Nd(III), Sm(III), Gd(III), Tb(III), Dy(III) and Ho(III) with 2-(2'-pyridyl) benzimidazole

Energy Technology Data Exchange (ETDEWEB)

Mishra, A; Singh, M P; Singh, V K

1982-05-01

The nitrato-complexes, (Y(PyBzH)/sub 2/(NO/sub 3/)/sub 2/)NO/sub 3/.H/sub 2/O and Nd, Sm, Gd, Tb, Dy, Ho ; n=1-3, m=0-0.5 ; PyBzh=2-(2 -pyridyl)benzimidazole) are formed on interaction of the ligand with metal nitrates in ethanol. The electrical conductance values (116-129 ohm/sup -1/cm/sup 2/mol/sup -1/) suggest 1:1 electrolyte-nature of the complexes. Magnetic moment values of Ce(2.53 B.M.), Pr(3.62 B.M.), Nd(3.52 B.M.), Sm(1.70 B.M.), Gd(8.06 B.M.), Tb(9.44 B.M.), Dy(10.56 B.M.) and Ho(10.51 B.M.) in the complexes confirm the positive state of the metals. Infrared evidences are obtained for the existance of both coordinated (C/sub 2/v) and uncoordinated (D/sub 3/h) nitrate groups. Electronic absorption spectra of Pr(III)-, Nd(III)-, Sm(III)-, Tb(III)-, Dy(III)- and Ho(III)-complexes have been analysed in the light of LSJ terms.

Nitrato-complexes of Y(III), La(III), Ce(III), Pr(III), Nd(III), Sm(III), Gd(III), Tb(III), Dy(III) and Ho(III) with 2-(2'-pyridyl) benzimidazole

International Nuclear Information System (INIS)

Mishra, A.; Singh, M.P.; Singh, V.K.

1982-01-01

The nitrato-complexes, [Y(PyBzH) 2 (NO 3 ) 2 ]NO 3 .H 2 O and Nd, Sm, Gd, Tb, Dy, Ho ; n=1-3, m=0-0.5 ; PyBzh=2-(2 -pyridyl)benzimidazole] are formed on interaction of the ligand with metal nitrates in ethanol. The electrical conductance values (116-129 ohm -1 cm 2 mol -1 ) suggest 1:1 electrolyte-nature of the complexes. Magnetic moment values of Ce(2.53 B.M.), Pr(3.62 B.M.), Nd(3.52 B.M.), Sm(1.70 B.M.), Gd(8.06 B.M.), Tb(9.44 B.M.), Dy(10.56 B.M.) and Ho(10.51 B.M.) in the complexes confirm the terpositive state of the metals. Infrared evidences are obtained for the existance of both coordinated (C 2 v) and uncoordinated (D 3 h) nitrate groups. Electronic absorption spectra of Pr(III)-, Nd(III)-, Sm(III)-, Tb(III)-, Dy(III)- and Ho(III)-complexes have been analysed in the light of LSJ terms. (author)

Performance comparison between silicon solar panel and dye-sensitized solar panel in Malaysia

Science.gov (United States)

Hamed, N. K. A.; Ahmad, M. K.; Urus, N. S. T.; Mohamad, F.; Nafarizal, N.; Ahmad, N.; Soon, C. F.; Ameruddin, A. S.; Faridah, A. B.; Shimomura, M.; Murakami, K.

2017-09-01

In carrying out experimental research in performance between silicon solar panel and dye-sensitive solar panel, we have been developing a device and a system. This system has been developed consisting of controllers, hardware and software. This system is capable to get most of the input sources. If only need to change the main circuit and coding for a different source input value. This device is able to get the ambient temperature, surface temperature, surrounding humidity, voltage with load, current with load, voltage without load and current without load and save the data into external memory. This device is able to withstand the heat and rain as it was fabricated in a waterproof box. This experiment was conducted to examine the performance of both the solar panels which are capable to maintain their stability and performance. A conclusion based on data populated, the distribution of data for dye-sensitized solar panel is much better than silicon solar panel as dye-sensitized solar panel is very sensitive to heat and not depend only on midday where is that is the maximum ambient temperature for both solar panel as silicon solar panel only can give maximum and high output only when midday.

Analysis of 3-panel and 4-panel microscale ionization sources

International Nuclear Information System (INIS)

Natarajan, Srividya; Parker, Charles B.; Glass, Jeffrey T.; Piascik, Jeffrey R.; Gilchrist, Kristin H.; Stoner, Brian R.

2010-01-01

Two designs of a microscale electron ionization (EI) source are analyzed herein: a 3-panel design and a 4-panel design. Devices were fabricated using microelectromechanical systems technology. Field emission from carbon nanotube provided the electrons for the EI source. Ion currents were measured for helium, nitrogen, and xenon at pressures ranging from 10 -4 to 0.1 Torr. A comparison of the performance of both designs is presented. The 4-panel microion source showed a 10x improvement in performance compared to the 3-panel device. An analysis of the various factors affecting the performance of the microion sources is also presented. SIMION, an electron and ion optics software, was coupled with experimental measurements to analyze the ion current results. The electron current contributing to ionization and the ion collection efficiency are believed to be the primary factors responsible for the higher efficiency of the 4-panel microion source. Other improvements in device design that could lead to higher ion source efficiency in the future are also discussed. These microscale ion sources are expected to find application as stand alone ion sources as well as in miniature mass spectrometers.

Understanding diagnostic variability in breast pathology: lessons learned from an expert consensus review panel

Science.gov (United States)

Allison, Kimberly H; Reisch, Lisa M; Carney, Patricia A; Weaver, Donald L; Schnitt, Stuart J; O’Malley, Frances P; Geller, Berta M; Elmore, Joann G

2015-01-01

Aims To gain a better understanding of the reasons for diagnostic variability, with the aim of reducing the phenomenon. Methods and results In preparation for a study on the interpretation of breast specimens (B-PATH), a panel of three experienced breast pathologists reviewed 336 cases to develop consensus reference diagnoses. After independent assessment, cases coded as diagnostically discordant were discussed at consensus meetings. By the use of qualitative data analysis techniques, transcripts of 16 h of consensus meetings for a subset of 201 cases were analysed. Diagnostic variability could be attributed to three overall root causes: (i) pathologist-related; (ii) diagnostic coding/study methodology-related; and (iii) specimen-related. Most pathologist-related root causes were attributable to professional differences in pathologists’ opinions about whether the diagnostic criteria for a specific diagnosis were met, most frequently in cases of atypia. Diagnostic coding/study methodology-related root causes were primarily miscategorizations of descriptive text diagnoses, which led to the development of a standardized electronic diagnostic form (BPATH-Dx). Specimen-related root causes included artefacts, limited diagnostic material, and poor slide quality. After re-review and discussion, a consensus diagnosis could be assigned in all cases. Conclusions Diagnostic variability is related to multiple factors, but consensus conferences, standardized electronic reporting formats and comments on suboptimal specimen quality can be used to reduce diagnostic variability. PMID:24511905

An exploratory analysis of criteria for the metabolic syndrome and its prediction of long-term cardiovascular outcomes

NARCIS (Netherlands)

Girman, C.J.; Dekker, J.M.; Rhodes, T.; Nijpels, M.G.A.A.M.; Stehouwer, C.D.A.; Bouter, L.M.; Heine, R.J.

2005-01-01

Studies have shown an increased risk of cardiovascular outcomes with the metabolic syndrome, but information on predictive properties of the National Cholesterol Education Program Adult Treatment Panel 3 (NCEP) criteria is sparse. The authors used data from the Hoorn population-based study in the

The added value of impedance-pH monitoring to Rome III criteria in distinguishing functional heartburn from non-erosive reflux disease.

Science.gov (United States)

Savarino, Edoardo; Marabotto, Elisa; Zentilin, Patrizia; Frazzoni, Marzio; Sammito, Giorgio; Bonfanti, Daria; Sconfienza, Luca; Assandri, Lorenzo; Gemignani, Lorenzo; Malesci, Alberto; Savarino, Vincenzo

2011-07-01

Functional heartburn is defined by Rome III criteria as an endoscopy-negative condition with normal oesophageal acid exposure time, negative symptom association to acid reflux and unsatisfactory response to proton pump inhibitors. These criteria underestimated the role of non-acid reflux. To assess the contribution of impedance-pH with symptom association probability (SAP) analysis in identifying endoscopy-negative patients with reflux disease and separating them from functional heartburn. Consecutive endoscopy-negative patients treated with proton pump inhibitors (n=219) undergoing impedance-pH monitoring off-therapy were analysed. Distal acid exposure time, reflux episodes, SAP and symptomatic response to proton pump inhibitors were measured. Based on impedance-pH/SAP, 67 (31%) patients were pH+/SAP+, 6 (2%) pH+/SAP-, 83 (38%) hypersensitive oesophagus and 63 (29%) functional heartburn. According to pH-metry alone/response to proton pump inhibitors, 62 (28%) were pH+/SAP+, 11 (5%) pH+/SAP-, 61 (28%) hypersensitive oesophagus and 85 (39%) functional heartburn. In the normal-acid exposure population the contribution of impedance-pH/SAP compared to pH-metry alone/response to proton pump inhibitors in identifying patients with reflux disease and functional heartburn resulted to be 10%. In patients with abnormal-acid exposure, the contribution of impedance-pH/SAP increased by 3%. Comparing impedance-pH testing with pH-metry alone plus the response to proton pump inhibitor therapy demonstrated that the latter ones cause underestimation of reflux disease patients and overestimation of functional heartburn patients. Copyright © 2011 Editrice Gastroenterologica Italiana S.r.l. Published by Elsevier Ltd. All rights reserved.

Antinuclear antibody panel

Science.gov (United States)

... page: //medlineplus.gov/ency/article/003535.htm Antinuclear antibody panel To use the sharing features on this page, please enable JavaScript. The antinuclear antibody panel is a blood test that looks at ...

Hepatitis virus panel

Science.gov (United States)

... page: //medlineplus.gov/ency/article/003558.htm Hepatitis virus panel To use the sharing features on this page, please enable JavaScript. The hepatitis virus panel is a series of blood tests used ...

EFSA CEF Panel (EFSA Panel on Food Contact Materials, Enzymes, Flavourings and Processing Aids), 2013. Scientific Opinion on Flavouring Group Evaluation 21, Revision 4 (FGE.21Rev4)

DEFF Research Database (Denmark)

Beltoft, Vibe Meister; Binderup, Mona-Lise; Frandsen, Henrik Lauritz

The Panel on Food Contact Materials, Enzymes, Flavourings and Processing Aids of the European Food Safety Authority was requested to evaluate 59 flavouring substances in the Flavouring Group Evaluation 21, Revision 4, using the Procedure in Commission Regulation (EC) No 1565/2000. This revision...... of these flavouring substances, the specifications for the materials of commerce have also been considered. Adequate specifications including complete purity criteria and identity for the materials of commerce have been provided for all 41 candidate substances...

EFSA CEF Panel (EFSA Panel on Food Contact Materials, Enzymes, Flavourings and Processing Aids), 2013. Scientific Opinion on Flavouring Group Evaluation 24, Revision 2 (FGE.24Rev2)

DEFF Research Database (Denmark)

Beltoft, Vibe Meister; Binderup, Mona-Lise; Frandsen, Henrik Lauritz

The Panel on Food Contact Materials, Enzymes, Flavourings and Processing Aids of the European Food Safety Authority was requested to evaluate 24 flavouring substances in the Flavouring Group Evaluation 24, Revision 2, using the Procedure in Commission Regulation (EC) No 1565/2000. This revision...... the safety assessment of these flavouring substances, the specifications for the materials of commerce have also been considered. Adequate specifications including complete purity criteria and identity for the materials of commerce have been provided for all 24 candidate substances....

Imaging and diagnostic criteria for multiple sclerosis: are we there yet?

International Nuclear Information System (INIS)

Josey, Lawrence; Curley, Michael; Mousavi, Foroogh Jafari; Taylor, Bruce V.; Lucas, Robyn; Coulthard, Alan

2012-01-01

Excluding post traumatic injury, Multiple Sclerosis (MS) is the most common disabling neurological disorder of young adults. Although the effect on mortality is limited, the association of a young demographic and significant morbidity combine to make MS a devastating disease. Since MS was given its first detailed description in 1868, diagnostic criteria continue to evolve. Recently, there has been an international commitment to combine both clinical and paraclinical tests to arrive at an earlier diagnosis. Widespread acceptance of the use of MRI in diagnosis, monitoring and research has made the role of the radiologist more critical than ever in this disease. The primary diagnostic criteria for MS are the International Panel criteria, commonly referred to as the McDonald criteria and it is essential that the radiology community is aware of the work preceding these criteria, so that they are understood in the correct context and the importance acknowledged. Literature review utilising key word search to obtain the historical and current context of magnetic resonance imaging in the diagnosis of MS. A succinct description of the evolution of criteria for the diagnosis of MS. Radiologists must recognise that there are specific diagnostic criteria for MS that continue to evolve as a result of new research, improved technology and clinical experience and it is crucial that these criteria be applied in daily practice. It should be evident that diagnostic imaging criteria for MS will be most effective when combined with standardised MRI protocols such as those published by the international Consortium of Multiple Sclerosis Centres.

REINFORCED COMPOSITE PANEL

DEFF Research Database (Denmark)

2003-01-01

A composite panel having front and back faces, the panel comprising facing reinforcement, backing reinforcement and matrix material binding to the facing and backing reinforcements, the facing and backing reinforcements each independently comprising one or more reinforcing sheets, the facing rein...... by matrix material, the facing and backing reinforcements being interconnected to resist out-of-plane relative movement. The reinforced composite panel is useful as a barrier element for shielding structures, equipment and personnel from blast and/or ballistic impact damage....

Rational Design of Composite Panels

DEFF Research Database (Denmark)

Riber, Hans Jørgen

1996-01-01

A non-linear structural model for composite panels is presented. The non-linear terms in the lateral displacements are modelled as an additional set of lateral loads acting on the panel. Hence the solution is reduced to that of an equivalent panel with small displacements In order to treat sandwich...... Norske Veritas', DNV, building rules concerning high-speed light craft, in which the panel scantlings are often restricted by a maximum lateral deflection connected with the panel span....

Composite panel development at JPL

Science.gov (United States)

Mcelroy, Paul; Helms, Rich

1988-01-01

Parametric computer studies can be use in a cost effective manner to determine optimized composite mirror panel designs. An InterDisciplinary computer Model (IDM) was created to aid in the development of high precision reflector panels for LDR. The materials properties, thermal responses, structural geometries, and radio/optical precision are synergistically analyzed for specific panel designs. Promising panels designs are fabricated and tested so that comparison with panel test results can be used to verify performance prediction models and accommodate design refinement. The iterative approach of computer design and model refinement with performance testing and materials optimization has shown good results for LDR panels.

EFSA Panel on Biological Hazards (BIOHAZ) and EFSA Panel on Contaminants in the Food Chain (CONTAM); Scientific Opinion on the minimum hygiene criteria to be applied to clean seawater and on the public health risks and hygiene criteria for bottled seawater intended for domestic use

DEFF Research Database (Denmark)

Hald, Tine

with microbiological criteria and appropriate water treatment, is proposed in order to ensure adequate hygiene conditions and to control hazards. The comprehensiveness of the sanitary survey, the stringency of microbiological criteria, and the need for treatment depend on the relative exposures associated...... to the different uses of seawater. For uses with low exposure to microbiological hazards, a basic sanitary survey and microbiological criteria based on the Directive 2006/7/EC are considered appropriate. For uses with a higher exposure, a more comprehensive sanitary survey, mandatory water treatment......, and microbiological criteria based on Council Directive 98/83/EC with an additional criterion for Vibrio spp. are considered appropriate. For uses with highest exposure, a more comprehensive sanitary survey, mandatory water treatment, and microbiological criteria based on Council Directive 98/83/EC with an additional...

Rome Criteria and a Diagnostic Approach to Irritable Bowel Syndrome

Directory of Open Access Journals (Sweden)

Brian E. Lacy

2017-10-01

Full Text Available Functional gastrointestinal disorders (FGIDs account for at least 40% of all referrals to gastroenterologists. Of the 33 recognized adult FGIDs, irritable bowel syndrome (IBS is the most prevalent, with a worldwide prevalence estimated at 12%. IBS is an important health care concern as it greatly affects patients’ quality of life and imposes a significant economic burden to the health care system. Cardinal symptoms of IBS include abdominal pain and altered bowel habits. The absence of abdominal pain makes the diagnosis of IBS untenable. The diagnosis of IBS can be made by performing a careful review of the patient’s symptoms, taking a thoughtful history (e.g., diet, medication, medical, surgical, and psychological history, evaluating the patient for the presence of warning signs (e.g., “red flags” of anemia, hematochezia, unintentional weight loss, or a family history of colorectal cancer or inflammatory bowel disease, performing a guided physical examination, and using the Rome IV criteria. The Rome criteria were developed by a panel of international experts in the field of functional gastrointestinal disorders. Although initially developed to guide researchers, these criteria have undergone several revisions with the intent of making them clinically useful and relevant. This monograph provides a brief overview on the development of the Rome criteria, discusses the utility of the Rome IV criteria, and reviews how the criteria can be applied clinically to diagnose IBS. In addition, a diagnostic strategy for the cost-effective diagnosis of IBS will be reviewed.

Supersonic Panel Flutter Test Results for Flat Fiber-Glass Sandwich Panels with Foamed Cores

Science.gov (United States)

Tuovila, W. J.; Presnell, John G., Jr.

1961-01-01

Flutter tests have been made on flat panels having a 1/4 inch-thick plastic-foam core covered with thin fiber-glass laminates. The testing was done in the Langley Unitary Plan wind tunnel at Mach numbers from 1.76 t o 2.87. The flutter boundary for these panels was found to be near the flutter boundary of thin metal panels when compared on the basis of an equivalent panel stiffness. The results also demonstrated that the depth of the cavity behind the panel has a pronounced influence on flutter. Changing the cavity depth from 1 1/2 inches to 1/2 inch reduced the dynamic pressure at start of flutter by 40 percent. No flutter was obtained when the spacers on the back of the panel were against the bottom of the cavity.

Panel Resource Management (PRM) Implementation and Effects within Safety Review Panel Settings and Dynamics

Science.gov (United States)

Taylor, Robert W.; Nash, Sally K.

2007-01-01

While technical training and advanced degree's assure proficiency at specific tasks within engineering disciplines, they fail to address the potential for communication breakdown and decision making errors familiar to multicultural environments where language barriers, intimidating personalities and interdisciplinary misconceptions exist. In an effort to minimize these pitfalls to effective panel review, NASA's lead safety engineers to the ISS Safety Review Panel (SRP), and Payload Safety Review Panel (PSRP) initiated training with their engineers, in conjunction with the panel chairs, and began a Panel Resource Management (PRM) program. The intent of this program focuses on the ability to reduce the barriers inhibiting effective participation from all panel attendees by bolstering participants confidence levels through increased communication skills, situational awareness, debriefing, and a better technical understanding of requirements and systems.

Solar panel cleaning robot

Science.gov (United States)

Nalladhimmu, Pavan Kumar Reddy; Priyadarshini, S.

2018-04-01

As the demand of electricity is increasing, there is need to using the renewable sources to produce the energy at present of power shortage, the use of solar energy could be beneficial to great extent and easy to get the maximum efficiency. There is an urgent in improving the efficiency of solar power generation. Current solar panels setups take a major power loss when unwanted obstructions cover the surface of the panels. To make solar energy more efficiency of solar array systems must be maximized efficiency evaluation of PV panels, that has been discussed with particular attention to the presence of dust on the efficiency of the PV panels have been highlighted. This paper gives the how the solar panel cleaning system works and designing of the cleaning system.

Incidence and Major Metabolic Risk Factors of Metabolic Syndrome ...

African Journals Online (AJOL)

The study involved 300 (92 males and 208 females) type 2 diabetic patients and was conducted at the Tamale Teaching/Regional Hospital from June 2006 to May 2007. Metabolic syndrome was diagnosed using the National Cholesterol Education Programme, Adult Treatment Panel III (2001) criteria. The incidence of the ...

Lightweight, Thermally Insulating Structural Panels

Science.gov (United States)

Eisen, Howard J.; Hickey, Gregory; Wen, Liang-Chi; Layman, William E.; Rainen, Richard A.; Birur, Gajanana C.

1996-01-01

Lightweight, thermally insulating panels that also serve as structural members developed. Honeycomb-core panel filled with low-thermal-conductivity, opacified silica aerogel preventing convection and minimizes internal radiation. Copper coating on face sheets reduces radiation. Overall thermal conductivities of panels smaller than state-of-art commercial non-structurally-supporting foam and fibrous insulations. On Earth, panels suitable for use in low-air-pressure environments in which lightweight, compact, structurally supporting insulation needed; for example, aboard high-altitude aircraft or in partially evacuated panels in refrigerators.

PERBANDINGAN UNJUK KERJA ANTARA PANEL SEL SURYA BERPENJEJAK DENGAN PANEL SEL SURYA DIAM

OpenAIRE

Syafaruddin Ch

2010-01-01

The ability to produce electrical energy at Solar Power Plant  is highly dependent on the magnitude and duration of sun exposure on the solar cell panels. The movement of the sun from east to west that periodicity in every day is a problem at  the  optimization generation of electricity at  Solar Power Plant   if using solar panel that motionless. This is because the solar cell panel can not catch the maximum sun exposure. To solve the above problem then designed a solar cell panel  tracker...

Thermal Performance of Precast Concrete Sandwich Panel (PCSP) Design for Sustainable Built Environment

Science.gov (United States)

Ern, Peniel Ang Soon; Ling, Lim Mei; Kasim, Narimah; Hamid, Zuhairi Abd; Masrom, Md Asrul Nasid Bin

2017-10-01

Malaysia’s awareness of performance criteria in construction industry towards a sustainable built environment with the use of precast concrete sandwich panel (PCSP) system is applied in the building’s wall to study the structural behaviour. However, very limited studies are conducted on the thermal insulation of exterior and interior panels in PCSP design. In hot countries such as Malaysia, proper designs of panel are important to obtain better thermal insulation for building. This study is based on thermal performance of precast concrete sandwich panel design for sustainable built environment in Malaysia. In this research, three full specimens, which are control specimen (C), foamed concrete (FC) panels and concrete panels with added palm oil fuel ash (FC+ POFA), where FC and FC+POFA sandwiched with gypsum board (G) were produced to investigate their thermal performance. Temperature difference of exterior and interior surface of specimen was used as indicators of thermal-insulating performance of PCSP design. Heat transfer test by halogen lamp was carried out on three specimens where the exterior surface of specimens was exposed to the halogen lamp. The temperature reading of exterior and interior surface for three specimens were recorded with the help of thermocouple. Other factors also studied the workability, compressive strength and axial compressive strength of the specimens. This study has shown that FC + POFA specimen has the strength nearer to normal specimen (C + FC specimen). Meanwhile, the heat transfer results show that the FC+POFA has better thermal insulation performance compared to C and FC specimens with the highest temperature difference, 3.4°C compared to other specimens. The results from this research are useful to be implemented in construction due to its benefits such as reduction of energy consumption in air-conditioning, reduction of construction periods and eco-friendly materials.

Assessment of metabolic syndrome in Kashmiri population with type 2 diabetes employing the standard criteria's given by WHO, NCEPATP III and IDF.

Science.gov (United States)

Lone, Shafat; Lone, Kouser; Khan, Saika; Pampori, Rafiq Ahmed

2017-12-01

Around 20-25 percent of the world's adult populations have the metabolic syndrome and they are twice as likely to die from heart attack or stroke compared with people without the syndrome. The World Health Organization proposed a definition for the metabolic syndrome in 1998 and later on NCEP ATPIII and IDF provided new definitions of this syndrome in 2001 and 2003 respectively. Very few studies have compared the different definitions to diagnose the metabolic syndrome in type two diabetics in India while as for Kashmir valley no such documented study has been carried out till date. To study the prevalence of metabolic syndrome in type 2 Kashmir diabetics and to find out the degree of agreement between three different criteria given by WHO, NCEPATPIII and IDF for diagnosis of metabolic syndrome. A cross sectional study was conducted in one of the two tertiary care hospitals of Kashmir, India. About 1000 patients were selected and their demographic, clinical and biochemical parameters were studied after obtaining informed consent from each patient. Prevalance of metabolic syndrome was found to be highest(84.5%) while using WHO definition.Kappa statistic between WHO, ATP III and WHO, IDF definitions was 0.697 (95% CI 0.637-0.754) and 0.775 (95%CI 0.72-0.82) respectively while the degree of agreement between IDF and ATP III definitions was highest with kappa of 0.851 (95%CI 0.810-0.889). Our study warrants for interventions to prevent the progression towards this syndrome among type 2 diabetics as early as the diagnosis of diabetes is made. Copyright © 2017 Ministry of Health, Saudi Arabia. Published by Elsevier Ltd. All rights reserved.

Panel data analysis using EViews

CERN Document Server

Agung, I Gusti Ngurah

2013-01-01

A comprehensive and accessible guide to panel data analysis using EViews software This book explores the use of EViews software in creating panel data analysis using appropriate empirical models and real datasets. Guidance is given on developing alternative descriptive statistical summaries for evaluation and providing policy analysis based on pool panel data. Various alternative models based on panel data are explored, including univariate general linear models, fixed effect models and causal models, and guidance on the advantages and disadvantages of each one is given. Panel Data Analysis

The effectiveness of scoliosis screening programs: methods for systematic review and expert panel recommendations formulation

Science.gov (United States)

2013-01-01

Background Literature on scoliosis screening is vast, however because of the observational nature of available data and methodological flaws, data interpretation is often complex, leading to incomplete and sometimes, somewhat misleading conclusions. The need to propose a set of methods for critical appraisal of the literature about scoliosis screening, a comprehensive summary and rating of the available evidence appeared essential. Methods To address these gaps, the study aims were: i) To propose a framework for the assessment of published studies on scoliosis screening effectiveness; ii) To suggest specific questions to be answered on screening effectiveness instead of trying to reach a global position for or against the programs; iii) To contextualize the knowledge through expert panel consultation and meaningful recommendations. The general methodological approach proceeds through the following steps: Elaboration of the conceptual framework; Formulation of the review questions; Identification of the criteria for the review; Selection of the studies; Critical assessment of the studies; Results synthesis; Formulation and grading of recommendations in response to the questions. This plan follows at best GRADE Group (Grades of Recommendation, Assessment, Development and Evaluation) requirements for systematic reviews, assessing quality of evidence and grading the strength of recommendations. Conclusions In this article, the methods developed in support of this work are presented since they may be of some interest for similar reviews in scoliosis and orthopaedic fields. PMID:23883346

Clinical diagnostic criteria of multiple sclerosis: the role of magnetic resonance imaging

International Nuclear Information System (INIS)

Belair, M.; Girard, M.

2004-01-01

The objective of this article is to summarize the diagnostic criteria recommended by the International Panel on the Diagnosis of Multiple Sclerosis in 2001. The recommendations of another working group, the Consortium of Multiple Sclerosis Centers Consensus Meeting, which met in Vancouver in 2001, concerning the diagnosis and follow-up of patients with multiple sclerosis are also presented in an effort to standardize the protocols for magnetic resonance imaging of these patients. (author)

RECIPANEL: RECYCLED PAPER PANELS

Directory of Open Access Journals (Sweden)

HERNÁN CAÑOLA

2012-01-01

Full Text Available En este artículo se estudia la fabricación y el comportamiento mecánico de paneles a base de papel reciclado. El objetivo principal del proyecto es producir un prototipo de panel que emplee elementos provenientes de residuos sólidos (papel periódico y de un material conglomerante (cemento Portland blanco. El panel debe ser económico, debe tener buenas propiedades mecánicas y debe tener dimensiones comerciales para su uso en muros tabiques y en cielos falsos en la industria de la construcción. El Recipanel es un panel no estructural a base de papel reciclado. El Recipanel cumple las normas colombianas en lo relativo a los paneles de uso no estructural y presenta además unas excelentes características mecánicas.

Economic growth and military expenditure linkages: a panel data analysis

Directory of Open Access Journals (Sweden)

Ahmed Shahid

2015-12-01

Full Text Available This paper has made an attempt to examine relationship between military expenditure and economic growth using 56 country panel data spanning over 1995—2011. Panel fixed effect model has been estimated for all 56 countries and sub-groups classified on the basis of World Bank income criteria. The results of this study indicate a positive effect of military expenditure on economic growth but this positive effect is negligible compared to the alternative uses of scare resources on non-military expenditure. Thus, the effect of military expenditure on economic growth is very low compared to the effect of expenditure on capital formation, hence military expenditure as a sub-optimal means of increasing economic growth compared to alternative uses of government spending on formation of fixed capital. This study raises an important argument of huge opportunity cost of military expenditure. The present study concludes that the boosting of economic growth through higher military expenditure is neither effective nor efficient way of achieving higher growth in the economy.

Selection criteria for water disinfection techniques in agricultural practices.

Science.gov (United States)

Haute, Sam van; Sampers, Imca; Jacxsens, Liesbeth; Uyttendaele, Mieke

2015-01-01

This paper comprises a selection tool for water disinfection methods for fresh produce pre- and postharvest practices. A variety of water disinfection technologies is available on the market and no single technology is the best choice for all applications. It can be difficult for end users to choose the technology that is best fit for a specific application. Therefore, the different technologies were characterized in order to identify criteria that influence the suitability of a technology for pre- or postharvest applications. Introduced criteria were divided into three principal components: (i) criteria related to the technology and which relate to the disinfection efficiency, (ii) attention points for the management and proper operation, and (iii) necessities in order to sustain the operation with respect to the environment. The selection criteria may help the end user of the water disinfection technology to obtain a systematic insight into all relevant aspects to be considered for preliminary decision making on which technologies should be put to feasibility testing for water disinfection in pre- and postharvest practices of the fresh produce chain.

Energy consumption and economic growth relationship: Evidence from panel data for low and middle income countries

International Nuclear Information System (INIS)

Ozturk, Ilhan; Aslan, Alper; Kalyoncu, Huseyin

2010-01-01

This paper uses the panel data of energy consumption (EC) and economic growth (GDP) for 51 countries from 1971 to 2005. These countries are divided into three groups: low income group, lower middle income group and upper middle income group countries. Firstly, a relationship between energy consumption and economic growth is investigated by employing panel cointegration method. Secondly, panel causality test is applied to investigate the way of causality between the energy consumption and economic growth. Finally, we test whether there is a strong or weak relationship between these variables by using method. The empirical results of this study are as follows: i) Energy consumption and GDP are cointegrated for all three income group countries. ii) The panel causality test results reveal that there is long-run Granger causality running from GDP to EC for low income countries and there is bidirectional causality between EC and GDP for middle income countries. iii) The estimated cointegration factor, β, is not close to 1. In other words, no strong relation is found between energy consumption and economic growth for all income groups considered in this study. The findings of this study have important policy implications and it shows that this issue still deserves further attention in future research.

Make Your Own Solar Panel.

Science.gov (United States)

Suzuki, David

1992-01-01

Presents an activity in which students make a simulated solar panel to learn about the principles behind energy production using solar panels. Provides information about how solar panels function to produce energy. (MCO)

Outcome Criteria for Discharging the Patient With a New Ostomy From Home Health Care: A WOCN Society Consensus Conference.

Science.gov (United States)

Colwell, Janice C; Kupsick, Phyllis T; McNichol, Laurie L

2016-01-01

The Wound, Ostomy and Continence Nurses Society hosted a consensus panel of expert ostomy clinicians who were tasked with identifying minimal discharge criteria for home care patients with a new fecal or urinary diversion. Shortened hospital inpatient stays, higher patient acuity, and limited access to ostomy specialists send patients with new ostomies home with multiple educational and adjustment needs related to a new stoma. The Society recognized the lack of evidence-based ostomy practice and supported the work of the panel to develop statements that defined elements of the care plan for the patient or caregiver in home care who is adapting to living with a stoma. Eighteen statements were developed that provide minimum discharge criteria for the patient with a new ostomy in the home care setting. Support based upon current evidence as well as expert opinion with implementation strategies are offered for each statement.

Solar panel parallel mounting configuration

Science.gov (United States)

Mutschler, Jr., Edward Charles (Inventor)

1998-01-01

A spacecraft includes a plurality of solar panels interconnected with a power coupler and an electrically operated device to provide power to the device when the solar cells are insolated. The solar panels are subject to bending distortion when entering or leaving eclipse. Spacecraft attitude disturbances are reduced by mounting each of the solar panels to an elongated boom made from a material with a low coefficient of thermal expansion, so that the bending of one panel is not communicated to the next. The boom may be insulated to reduce its bending during changes in insolation. A particularly advantageous embodiment mounts each panel to the boom with a single mounting, which may be a hinge. The single mounting prevents transfer of bending moments from the panel to the boom.

Analysis of patterns of three-phase bone scintigraphy for patients with complex regional pain syndrome diagnosed using the proposed research criteria (the 'Budapest Criteria').

Science.gov (United States)

Moon, J Y; Park, S Y; Kim, Y C; Lee, S C; Nahm, F S; Kim, J H; Kim, H; Oh, S W

2012-04-01

Three-phase bone scintigraphy (TPBS) is an established objective diagnostic method for complex regional pain syndrome (CRPS), but its validity remains controversial. The aims of this study were: (i) to re-evaluate the diagnostic performance of TPBS, and (ii) to suggest new TPBS criteria based on the proposed research criteria for CPRS in Budapest (the 2003 Budapest research criteria). The medical records of 228 consecutive patients, evaluated using the Budapest research criteria, were retrospectively analysed. Of these, 116 patients were included in the present study, and 69 of 116 were diagnosed to have CRPS based on these criteria. The diagnostic performance of TPBS was assessed by determining its sensitivity, specificity, and positive and negative likelihood ratios, and new criteria for TPBS were identified by pattern analysis using the Budapest research criteria. The sensitivity, specificity, positive likelihood ratio, and negative likelihood ratio of TPBS for the diagnosis of CRPS according to the Budapest research criteria were 40.0, 76.5, 1.73, and 0.78, respectively. Furthermore, D-D-D, D-D-S, and D-D-I patterns [i.e. according to decreased (D), symmetrical (S), or increased (I) tracer uptake during Phases I, II, and III] of TPBS were found to be positively predictive for CRPS. The diagnostic value of a positive TPBS for CRPS is low from the view point of the Budapest research criteria. Our findings suggest that a diagnosis of CRPS using the Budapest research criteria should be considered when decreased patterns of TPBS are observed during Phases I and II.

Seismic hazard analysis. Review panel, ground motion panel, and feedback results

International Nuclear Information System (INIS)

Bernreuter, D.L.

1981-10-01

The Site Specific Spectra Project (SSSP) was a multi-year study funded by the U.S. Nuclear Regulatory Commission to provide estimates of the seismic hazards at a number of nuclear power plant sites in the Eastern U.S. A key element of our approach was the Peer Review Panel, which we formed in order to ensure that our use of expert opinion was reasonable. We discuss the Peer Review Panel results and provide the complete text of each member's report. In order to improve the ground motion model, an Eastern U.S. Ground Motion Model Panel was formed. In Section 4 we tabulate the responses from the panel members to our feedback questionnaire and discuss the implications of changes introduced by them. We conclude that the net difference in seismic hazard values from those presented in Volume 4 is small and does not warrant a reanalysis. (author)

Paediatric Rome III Criteria-Related Abdominal Pain Is Associated With Helicobacter pylori and Not With Calprotectin.

Science.gov (United States)

Sýkora, Josef; Huml, Michal; Siala, Konrad; Pomahačová, Renáta; Jehlička, Petr; Liška, Jiří; Kuntscherová, Jana; Schwarz, Jan

2016-10-01

Abdominal pain-related functional gastrointestinal disorders in children include functional dyspepsia, functional abdominal pain, irritable bowel syndrome, and abdominal migraine. We aimed to evaluate a possible association between functional abdominal pain disorders and Helicobacter pylori infection and faecal calprotectin level. Prospective observational study including consecutive children with functional gastrointestinal disorders fulfilling Rome III criteria (cases) and age/sex-matched healthy controls. H pylori has been detected by biopsy-based tests and stool-antigen detection, faecal calprotectin by enzyme-linked immunosorbent assay. A total of 56 cases (27 with functional dyspepsia) and 56 controls were enrolled. H pylori being detected in 17 of 56 cases (30.4%) and 4 of 56 controls (7.1%, odds ratio: 5.7; 95% confidence interval [CI]: 1.8-18.2, P = 0.003). H pylori was detected significantly more frequently in cases with functional dyspepsia (14/27, 51.9% odds ratio: 14.0; 95% CI: 3.9-49.7, P = 0.00001) than in controls and not in cases with other well-recognized functional gastrointestinal complaints (3/29, 10.3%). The median faecal calprotectin level was similar in cases (7.8 μg/g, 95% CI: 7.8-8.4) including those with gastritis, and controls (9.1 μg/g, 95% CI: 7.8-11.3). Gastritis features were more frequent in H pylori-infected and noninfected cases with functional dyspepsia (27/27, 100%) than in cases with other abdominal functional complaints (15/29, 51.7%, P = 0.007). H pylori gastritis and noninfectious gastritis were associated with functional dyspepsia in children referred for abdominal pain-related functional gastrointestinal disorders while faecal calprotectin is not a predictor of gastritis and is similar in children with functional abdominal pain symptoms and in controls.

Mounting clips for panel installation

Science.gov (United States)

Cavieres, Andres; Al-Haddad, Tristan; Goodman, Joseph

2017-07-11

A photovoltaic panel mounting clip comprising a base, central indexing tabs, flanges, lateral indexing tabs, and vertical indexing tabs. The mounting clip removably attaches one or more panels to a beam or the like structure, both mechanically and electrically. It provides secure locking of the panels in all directions, while providing guidance in all directions for accurate installation of the panels to the beam or the like structure.

Containment design, performance criteria and research needs for advanced reactor designs

International Nuclear Information System (INIS)

Bagdi, G.; Ali, S.; Costello, J

2004-01-01

This paper points out some important shifts in the basic expectations in the performance requirements for containment structures and discusses the areas where the containment structure design requirements and acceptance criteria can be integrated with ultimate test based insights. Although there has not been any new reactor construction in the United States for over thirty years, several designs of evolutionary and advanced reactors have already been certified. Performance requirements for containment structures under design basis and severe accident conditions and explicit consideration of seismic margins have been used in the design certification process. In the United States, the containment structure design code is the American Society of Mechanical Engineers, Boiler and Pressure Vessel Code, Section III, Division 1, Subsection NE-Class MC for the steel containment and Section III, Division 2 for reinforced and prestressed concrete reactor vessels and containments. This containment design code was based on the early concept of applying design basis internal pressure and associated load combinations that included the operating basis and safe shutdown earthquake ground motion. These early design criteria served the nuclear industry and the regulatory authorities in maintaining public health and safety. However, these early design criteria do not incorporate the performance criteria related to containment function in an integrated fashion. Research in large scale model testing of containment structures to failure from over pressurization and shake table testing using simulated ground motion, have produced insights related to failure modes and material behavior at failure. The results of this research provide the opportunity to integrate these observations into design and acceptance criteria. This integration process would identify 'gaps' in the present knowledge and future research needs. This knowledge base is important for gleaning risk-informed insights into

Qualification criteria for persons responsible for radiation protection

International Nuclear Information System (INIS)

Wehner, G

1980-01-01

A survey of the qualification criteria included in the German atomic law (Atomic Energy Act, Radiological Protection Ordinance and X-ray Protection Ordinance) for persons responsible for radiation protection is given. Especially the various activities for which a health physics officer is required, the range of qualification in each case and the way the qualification has to be proved, are pointed out. Also the different guides that are issued to complete the legal requirements are mentioned. The definitions of the term qualification for health physics given in the different guides are cited and it is shown, that the qualification of a healt physics officer has to be based on the three criteria (I) vocational training. (II) professional experience and (III) the necessary knowledge in radiation protection. (orig./HP) [de

High-consequence analysis, evaluation, and application of select criteria

International Nuclear Information System (INIS)

Gutmanis, I.; Jaksch, J.A.

1984-01-01

A number of characteristics distinguish environmental risk from pollution problems. The characteristics make environmental risk problems harder to manage through existing regulatory, legal, and economic institutions. Hence, technologies involving environmental risk impose on society extremely difficult collective decisions. This paper is concerned with the process of reaching social decisions that involve low-probability, high-consequence outcomes. It is divided into five major parts. Part I contains the introduction. Part II reviews the two main classes of criteria that have been proposed for social decisions: approaches based on market mechanisms and their extension, and approaches associated with Rawls and Buchanan, which not only focus on outcomes, but also impose a set of minimal constraints on the process for reaching decisions and social consensus. Part III proposes a set of eight criteria for evaluating social decision processes. In Parts IV and V we investigate applying the criteria to two case studies -- one on nuclear waste disposal and the other on transportation of liquefied natural gas

Human factors inspection of current control room panel in Jose Cabrera NPP

International Nuclear Information System (INIS)

Almeida, P.; O'Hara, J.; Higgins, J.

2002-01-01

Within the process of renewal of Exploitation Permit of Jose Cabrera Nuclear Power Plant, UNION FENOSA GENERACIO, S. A. (UFG) has carried out an analysis and evaluation project regarding human factors implications of current control room panel arrangement. The project has been developed in two phases. In the first phase, leaded by EPRI and carried out by experts from SAIC, an independent review from a double viewpoint of human reliability and human factors was developed. In the second phase, a multidisciplinary team (composed by human factors, risk analysis, operation, engineering, training and instrumentation and controls experts) has developed a study on human factors implications of current panel arrangement, following the methodology pointed out in NUREG-0711. The project has been developed under the direction of Brookhaven National Laboratory (BNL), organisation that has authored the aforementioned methodology, with the participation of UFG and SOLUZIONA Ingenieria. For the development of the second study the following steps were taken: Firstly, the potential effects of panel arrangement on crew performance were identified its real evidence was analysed and the goals for the improvement of control room operation were established; following NUREG-0711. After this, several design alternatives that addressed these goals were identified and were analysed along three dimensions: human factors, risk analysis and economic costs. Finally the results of these evaluations were combined using a multi-attribute decision method to arrive at a recommended alternative as he best proposal to incorporate human factors criteria and good practices in the design of control room panels. (Author)

Flat-panel electronic displays: a triumph of physics, chemistry and engineering.

Science.gov (United States)

Hilsum, Cyril

2010-03-13

This paper describes the history and science behind the development of modern flat-panel displays, and assesses future trends. Electronic displays are an important feature of modern life. For many years the cathode ray tube, an engineering marvel, was universal, but its shape was cumbersome and its operating voltage too high. The need for a flat-panel display, working at a low voltage, became imperative, and much research has been applied to this need. Any versatile flat-panel display will exploit an electro-optical effect, a transparent conductor and an addressing system to deliver data locally. The first need is to convert an electrical signal into a visible change. Two methods are available, the first giving emission of light, the second modulating ambient illumination. The most useful light-emitting media are semiconductors, historically exploiting III-V or II-VI compounds, but more recently organic or polymer semiconductors. Another possible effect uses gas plasma discharges. The modulating, or subtractive, effects that have been studied include liquid crystals, electrophoresis, electrowetting and electrochromism. A transparent conductor makes it possible to apply a voltage to an extended area while observing the results. The design is a compromise, since the free electrons that carry current also absorb light. The first materials used were metals, but some semiconductors, when heavily doped, give a better balance, with high transmission for a low resistance. Delivering data unambiguously to a million or so picture elements across the display area is no easy task. The preferred solution is an amorphous silicon thin-film transistor deposited at each cross-point in an X-Y matrix. Success in these endeavours has led to many applications for flat-panel displays, including television, flexible displays, electronic paper, electronic books and advertising signs.

Panel Session

DEFF Research Database (Denmark)

Bertelsen, Olav Wedege

2004-01-01

In this panel session, four researchers will discuss the role of a theoretical foundation, in particular AT, in the design of information technology based artefacts. The general discussion will take of from a specific examination of the ActAD approach.......In this panel session, four researchers will discuss the role of a theoretical foundation, in particular AT, in the design of information technology based artefacts. The general discussion will take of from a specific examination of the ActAD approach....

78 FR 41937 - Joint Meeting of the Gastroenterology-Urology Panel and the Radiological Devices Panel of the...

Science.gov (United States)

2013-07-12

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2013-N-0816] Joint Meeting of the Gastroenterology-Urology Panel and the Radiological Devices Panel of the Medical...: Gastroenterology-Urology Panel and Radiological Devices Panel of the Medical Devices Advisory Committee. General...

Prevalência de síndrome metabólica em idosos de uma comunidade: comparação entre três métodos diagnósticos Prevalencia de síndrome metabólico en adultos mayores: comparación entre tres métodos diagnósticos Prevalence of metabolic syndrome in an elderly community: comparison between three diagnostic methods

Directory of Open Access Journals (Sweden)

Julio Cesar Rigo

2009-08-01

�TODOS Este es un estudio transversal, de base poblacional, realizado en la ciudad de Novo Hamburgo - RS, Brasil -, del que participaron 378 adultos mayores con 60 años o más (252 mujeres y 126 varones. La prevalencia del SM se estimó al aplicar los criterios diagnósticos del National Cholesterol Education Program - Adult Treatment Panel III (NCEP ATPIII (2001, del NCEP ATPIII revisado (2005 y de la IDF. RESULTADOS: La prevalencia de SM aumentó progresivamente con la utilización de los criterios del NCEP ATP III, NCEP ATP III revisado y de la IDF, presentando valores de un 50,3%, un 53,4% y el 56,9%, respectivamente. El aumento progresivo de la prevalencia de SM con la utilización de los tres criterios ocurrió en ambos los sexos, con mayor prevalencia entre las mujeres, con porcentajes de un 57,1%, un 59,9% y un 63,5% con los criterios del NCEP ATP III, NCEP ATP III revisado y de la IDF, respectivamente. CONCLUSIÓN: Al utilizar el criterio de la IDF, se pudo encontrar una mayor prevalencia de SM con relación a la prevalencia encontrada con el criterio del NCEP ATP III y NCEP ATP III revisado. La prevalencia de la SM fue mayor entre las mujeres, independientemente del criterio utilizado.BACKGROUND: The prevalence of the metabolic syndrome (MS has shown wide variation in different studies, depending on the population sample and the diagnostic criteria used. The prevalence of MS tends to be higher with the diagnostic criteria of the International Diabetes Federation (IDF. OBJECTIVE: To compare the prevalence of MS using different criteria in an elderly community. METHODS: This was a cross-sectional population-based study conducted in the city of Novo Hamburgo - RS - Brazil, in which 378 elderly individuals, aged 60 years or over (252 women and 126 men participated. The prevalence of MS was estimated using the National Cholesterol Education Program - Adult Treatment Panel III (NCEP ATPIII (2001, the revised NCEP ATPIII (2005 and the IDF diagnostic criteria. RESULTS: The

Pros and Cons While Looking Through an Asian Window on the Rome IV Criteria for Irritable Bowel Syndrome: Pros.

Science.gov (United States)

Ghoshal, Uday C

2017-07-30

A decade after Rome III, in 2016, Rome IV criteria were published. There are major differences between Rome IV and the earlier iteration, some of which are in line with Asian viewpoints. The clinical applicability of the Rome IV criteria of irritable bowel syndrome (IBS) in Asian perspective is reviewed here. Instead of considering functional gastrointestinal disorders (FGIDs) to be largely psychogenic, Rome IV suggested the importance of the gut over brain ("disorders of gut-brain interaction" not "brain-gut interaction"). The word "functional" is underplayed. Multi-dimensional clinical profile attempts to recognize micro-organic nature, like slow colon transit and fecal evacuation disorders in constipation and dietary intolerance including that of lactose and fructose, bile acid malabsorption, non-celiac wheat sensitivity, small intestinal bacterial overgrowth, and gastrointestinal infection in diarrhea. Overlap between different FGIDs has been recognized as Rome IV suggests these to be a spectrum rather than discrete disorders. Bloating, common in Asia, received attention, though less. Sub-typing of IBS may be more clinician-friendly now as the patient-reported stool form may be used than a diary. However, a few issues, peculiar to Asia, need consideration; Rome IV, like Rome III, suggests that Bristol type I-II stool to denote constipation though Asian experts include type III as well. Work-up for physiological factors should be given greater importance. Language issue is important. Bloating, common in IBS, should be listed in the criteria. Threshold values for symptoms in Rome IV criteria are based on Western data. Post-infectious malabsorption (tropical sprue) should be excluded to diagnose post-infectious IBS, particularly in Asia.

Material failures observed in Doublet III neutral beamlines

International Nuclear Information System (INIS)

Bailey, E.W.; Colleraine, A.; Doll, D.; Grunloh, H.; Kim, J.; Langhorn, A.; Thurgood, B.

1983-12-01

The Doublet III neutral beam injectors consist of three separable spools two meters in diameter by four meters long overall when assembled. Contained within these spools are the neutralizers, ion dumps, deflecting magnet, calorimeter dumps, cryogenic panels and beam scraping collimators 3,7. To date three beamlines are in operation on Doublet III, and the beams have accumulated operating time of approximately 32 months, with the oldest having been in operation for 18 months. During this time operation of DIII with the neutral beam sources has demonstrated the following: 7.8 MW injected neutrals from three beamlines (6 sources), high β (4.5%), and non-circular plasma shape. The sources have also exhibited a very reliable injected shot history 4, 5, 6, 8. Material failures encountered during the operation of DIII N.B. injectors and the solutions to these failures are described. Failures include cracking of the neutralizer exit collimator due to heating cycles, failure of cyropanel support rods due to cooling cycles, failure of the sliding drive of the moveable calorimeter due to friction

Panel manipulation in social stress testing: The Bath Experimental Stress Test for Children (BEST-C).

Science.gov (United States)

Cheetham, Tara J; Turner-Cobb, Julie M

2016-01-01

Whilst acute stress paradigms in adults make use of adult panel members, similar paradigms modified for child participants have not manipulated the panel. Most work has utilised an audience of adult confederates, regardless of the age of the population being tested. The aim of this study was to trial a social stress test for children that provided a meaningful environment using age-matched child peers as panel actors. Thirty-three participants (7-11 years) underwent the Bath Experimental Stress Test for Children (BEST-C). Based on the Trier Social Stress Test (TSST), it comprises a shortened six-minute public speaking task and four-minute maths challenge. It differs from previous stress tests by using age-matched children on the panel, pre-recorded and presented as a live feed, and includes an expanded manipulation check of subjective experience. Salivary cortisol was assessed at four time points, pre-post stress testing; life events, daily hassles and coping strategies were measured through questionnaires. A simple numerical coding scheme was applied to post-test interview data. The BEST-C generated a typical stress and adaptation response in salivary cortisol (p=.032). Age and gender differences were observed during recovery. Cortisol responses mapped directly onto three distinct subjective response patterns: (i) expected response and recovery; (ii) expected response, no recovery; (iii) no response. The BEST-C, utilising child confederates of participant target age is a meaningful social stress test for children. This is the first social stress test developed specifically for children that manipulates panel characteristics by using child confederates and a pre-recorded sham panel. Greater cortisol responses to the test were also found to match subjective verbal accounts of the experience. It offers a meaningful acute stress paradigm with potential applications to other child and adolescent age groups. Furthermore, it leads the way in the use of panel manipulation

Ottawa Panel evidence-based clinical practice guidelines for therapeutic exercise in the management of hip osteoarthritis.

Science.gov (United States)

Brosseau, Lucie; Wells, George A; Pugh, Arlanna G; Smith, Christine Am; Rahman, Prinon; Àlvarez Gallardo, Inmaculada C; Toupin-April, Karine; Loew, Laurianne; De Angelis, Gino; Cavallo, Sabrina; Taki, Jade; Marcotte, Rachel; Fransen, Marlene; Hernandez-Molina, Gabriela; Kenny, Glen P; Regnaux, Jean-Philippe; Lefevre-Colau, Marie-Martine; Brooks, Sydney; Laferriere, Lucie; McLean, Linda; Longchamp, Guy

2016-10-01

The primary objective is to identify effective land-based therapeutic exercise interventions and provide evidence-based recommendations for managing hip osteoarthritis. A secondary objective is to develop an Ottawa Panel evidence-based clinical practice guideline for hip osteoarthritis. The search strategy and modified selection criteria from a Cochrane review were used. Studies included hip osteoarthritis patients in comparative controlled trials with therapeutic exercise interventions. An Expert Panel arrived at a Delphi survey consensus to endorse the recommendations. The Ottawa Panel hierarchical alphabetical grading system (A, B, C+, C, D, D+, or D-) considered the study design (level I: randomized controlled trial and level II: controlled clinical trial), statistical significance (p osteoarthritis. Strength training exercises displayed the greatest improvements for pain (Grade A), disability (Grades A and C+), physical function (Grade A), stiffness (Grade A), and range of motion (Grade A) within a short time period (8-24 weeks). Stretching also greatly improved physical function (Grade A), and flexibility exercises improved pain (Grade A), range of motion (Grade A), physical function (Grade A), and stiffness (Grade C+). The Ottawa Panel recommends land-based therapeutic exercise, notably strength training, for management of hip osteoarthritis in reducing pain, stiffness and self-reported disability, and improving physical function and range of motion. © The Author(s) 2015.

Los Angeles International Airport Runway Incursion Studies: Phase III--Center-Taxiway Simulation

Science.gov (United States)

Madson, Michael D.

2004-01-01

Phase III of the Los Angeles International Airport Runway Incursion Studies was conducted, under an agreement with HNTB Corporation, at the NASA Ames FutureFlight Central (FFC) facility in June 2003. The objective of the study was the evaluation of a new center-taxiway concept at LAX. This study is an extension of the Phase I and Phase II studies previously conducted at FFC. This report presents results from Phase III of the study, in which a center-taxiway concept between runways 25L and 25R was simulated and evaluated. Phase III data were compared objectively against the Baseline data. Subjective evaluations by participating LAX controllers were obtained with regard to workload, efficiency, and safety criteria. To facilitate a valid comparison between Baseline and Phase III data, the same scenarios were used for Phase III that were tested during Phases I and II. This required briefing participating controllers on differences in airport and airline operations between 2001 and today.

Advanced composite structures. [metal matrix composites - structural design criteria for spacecraft construction materials

Science.gov (United States)

1974-01-01

A monograph is presented which establishes structural design criteria and recommends practices to ensure the design of sound composite structures, including composite-reinforced metal structures. (It does not discuss design criteria for fiber-glass composites and such advanced composite materials as beryllium wire or sapphire whiskers in a matrix material.) Although the criteria were developed for aircraft applications, they are general enough to be applicable to space vehicles and missiles as well. The monograph covers four broad areas: (1) materials, (2) design, (3) fracture control, and (4) design verification. The materials portion deals with such subjects as material system design, material design levels, and material characterization. The design portion includes panel, shell, and joint design, applied loads, internal loads, design factors, reliability, and maintainability. Fracture control includes such items as stress concentrations, service-life philosophy, and the management plan for control of fracture-related aspects of structural design using composite materials. Design verification discusses ways to prove flightworthiness.

Use of Internet panels to conduct surveys.

Science.gov (United States)

Hays, Ron D; Liu, Honghu; Kapteyn, Arie

2015-09-01

The use of Internet panels to collect survey data is increasing because it is cost-effective, enables access to large and diverse samples quickly, takes less time than traditional methods to obtain data for analysis, and the standardization of the data collection process makes studies easy to replicate. A variety of probability-based panels have been created, including Telepanel/CentERpanel, Knowledge Networks (now GFK KnowledgePanel), the American Life Panel, the Longitudinal Internet Studies for the Social Sciences panel, and the Understanding America Study panel. Despite the advantage of having a known denominator (sampling frame), the probability-based Internet panels often have low recruitment participation rates, and some have argued that there is little practical difference between opting out of a probability sample and opting into a nonprobability (convenience) Internet panel. This article provides an overview of both probability-based and convenience panels, discussing potential benefits and cautions for each method, and summarizing the approaches used to weight panel respondents in order to better represent the underlying population. Challenges of using Internet panel data are discussed, including false answers, careless responses, giving the same answer repeatedly, getting multiple surveys from the same respondent, and panelists being members of multiple panels. More is to be learned about Internet panels generally and about Web-based data collection, as well as how to evaluate data collected using mobile devices and social-media platforms.

Development of explicit criteria for prioritization of hip and knee replacement.

Science.gov (United States)

Escobar, Antonio; Quintana, José M; Bilbao, Amaia; Ibañez, Berta; Arenaza, Juan C; Gutiérrez, Luis; Azkárate, Jesús; Güenaga, Jose I; Vidaurreta, Ignacio

2007-06-01

Among the problems to the publicly funded national health services are the waiting lists. Patients who need elective surgery generally have long waiting times before treatment. We aimed to develop a new prioritization tool for primary hip and knee replacement. Criteria were developed using a modified Delphi panel process. We convened a panel of nine members who scored the scenarios created by the research team and by patient focus groups. We studied the level of agreement among the panelists and the contribution of the variables to the ratings of the panel using linear and logistic regression models. The priority scores of the variables and their levels were synthesized using the optimal scaling and standard linear regression methods. Seven variables, pain on motion, walking functional limitations, abnormal findings on physical examination, pain at rest, other functional limitations, social role, and other pathologies that could improve with joint replacement, were considered to create the different scenarios. The panel scored 192 scenarios. The disagreement among the panelists was very low (1%) with an intra-class correlation coefficient of 0.72. Of the 192 scenarios, 45.8% were scored as urgent, 35.4% as preferred and 18.8% as ordinary. The variables that contributed most to the scores were pain on motion and walking functional limitations. When optimal scaling and regression techniques were applied, similar results were obtained. This tool can evaluate and prioritize patients on a waiting list for hip or knee replacement. We also provide a simple and easy way to use an algorithm to estimate the treatment priority for individual patients.

Ottawa Panel evidence-based clinical practice guidelines for the management of osteoarthritis in adults who are obese or overweight.

Science.gov (United States)

Brosseau, Lucie; Wells, George A; Tugwell, Peter; Egan, Mary; Dubouloz, Claire-Jehanne; Casimiro, Lynn; Bugnariu, Nicoleta; Welch, Vivian A; De Angelis, Gino; Francoeur, Lilliane; Milne, Sarah; Loew, Laurianne; McEwan, Jessica; Messier, Steven P; Doucet, Eric; Kenny, Glen P; Prud'homme, Denis; Lineker, Sydney; Bell, Mary; Poitras, Stéphane; Li, Jing Xian; Finestone, Hillel M; Laferrière, Lucie; Haines-Wangda, Angela; Russell-Doreleyers, Marion; Lambert, Kim; Marshall, Alison D; Cartizzone, Margot; Teav, Adam

2011-06-01

The objective of this review was to construct an updated evidence-based clinical practice guideline on the use of physical activity and diet for the management of osteoarthritis (OA) in adults (>18 years of age) who are obese or overweight (body mass index ≥25 kg/m(2)). Articles were extracted from the following databases: MEDLINE, EMBASE (Current Contents), SPORTDiscus, SUM, Scopus, CINAHL, AMED, BIOMED, PubMed, ERIC, the Cochrane Controlled Trials, and PEDro. The Ottawa Panel and research assistance team strictly applied the inclusion and exclusion criteria from previous Ottawa Panel publications. An a priori literature search was conducted for articles related to obesity and OA of the lower extremities that were published from January 1, 1966, to November 30, 2010. Inclusion criteria and the methods to grade the recommendations were created by the Ottawa Panel. were graded based on the strength of evidence (A, B, C, C+, D, D+, or D-) as well as experimental design (I for randomized controlled trials and II for nonrandomized studies). In agreement with previous Ottawa Panel methods, Cochrane Collaboration methods were utilized for statistical analysis. Clinical significance was established by an improvement of ≥15% in the experimental group compared with the control group. There were a total of 79 recommendations from 9 articles. From these recommendations, there were 36 positive recommendations: 21 grade A and 15 grade C+. There were no grade B recommendations, and all recommendations were of clinical benefit. Further research is needed, as more than half of the trials were of low methodological quality. This review suggests that physical activity and diet programs are beneficial, specifically for pain relief (9 grade A recommendations) and improved functional status (6 grade A and 7 grade C+ recommendations), for adults with OA who are obese or overweight. The Ottawa Panel was able to demonstrate that when comparing physical activity alone, diet alone

Micro-inverter solar panel mounting

Science.gov (United States)

Morris, John; Gilchrist, Phillip Charles

2016-02-02

Processes, systems, devices, and articles of manufacture are provided. Each may include adapting micro-inverters initially configured for frame-mounting to mounting on a frameless solar panel. This securement may include using an adaptive clamp or several adaptive clamps secured to a micro-inverter or its components, and using compressive forces applied directly to the solar panel to secure the adaptive clamp and the components to the solar panel. The clamps can also include compressive spacers and safeties for managing the compressive forces exerted on the solar panels. Friction zones may also be used for managing slipping between the clamp and the solar panel during or after installation. Adjustments to the clamps may be carried out through various means and by changing the physical size of the clamps themselves.

1994 Panel 1 Utilization Plan

International Nuclear Information System (INIS)

1994-01-01

The Waste Isolation Pilot Plant (WIPP) is intended to receive, handle, and permanently dispose of transuranic (TRU) waste. To fulfill this mission, the U.S. Department of Energy (DOE) constructed a full-scale facility to demonstrate both technical and operational principles of the permanent isolation of TRU waste. The WIPP consists of surface and underground facilities. Panel 1 is situated in the underground facility horizon which is located approximately 2,150 feet below the surface in the predominantly halite Salado Formation. The Panel 1 Utilization Plan provides a strategy for the optimum use of Panel 1 which is consistent with the priorities established by the DOE to accomplish the WIPP mission. These priorities, which include maintaining personnel safety, conducting performance assessment, and continued operational enhancements, are the guiding premise for the decisions on the planned usage of the WIPP underground facility. The continuation of ongoing investigations along with the planned testing and training to be carried out in Panel 1 will enhance the current knowledge and understanding of the operational and geotechnical aspects of the panel configuration. This enhancement will ultimately lead to safer, more efficient, and more cost-effective methods of operation. Excavation of the waste storage area began in May 1986 with the mining of entries to Panel 1. The original design for the waste storage rooms at the WIPP provided a limited period of time during which to mine the openings and to emplace waste. Each panel, consisting of seven storage rooms, was scheduled to be mined and filled in less than 5 years. Panel 1 was developed to receive waste for a demonstration phase that was scheduled to start in October 1988. The demonstration phase was deferred, and the experimental test program was modified to use contact-handled (CH) transuranic waste in bin-scale tests, planned for Room 1, Panel 1

Isothiocyanato complexes of Gd(III), Tb(III), Dy(III) and Ho(III) with 2-(2'-pyridyl)benzimidazole

Energy Technology Data Exchange (ETDEWEB)

Mishra, A; Singh, V K

1982-01-01

Six-coordinated complexes of the type (Ln(PyBzH)/sub 2/NCS.H/sub 2/O) (NCS)/sub 2/.nH/sub 2/O/mC/sub 2/H/sub 5/OH (Ln = Gd(III), Tb(III), Dy(III) and Ho(III), n=1-2; m=1) have been prepared from Ln(NCS)/sub 6//sup 3 -/. The room temperature magnetic moment values confirm the terpositive state of the lanthanide ions. Infrared spectra suggest the N-coordination of thiocyanate group. Electronic spectral studies of Tb(III), Dy(III) and Ho(III) complexes have been made in terms of LSJ term energies. 13 refs.

Data quality in probability-based online panels: Nonresponse, attrition, and panel conditioning

NARCIS (Netherlands)

Struminskaya, B.; Methodology and statistics for the behavioural and social sciences

2014-01-01

Online panels – surveys administered over the Internet in which persons are asked to complete surveys regularly – offer cost reductions compared to surveys that use more traditional modes of data collection (face-to-face, telephone, and mail). However, some characteristics of online panels may cause

The Doublet III neutral beam injector cryosystem

International Nuclear Information System (INIS)

Langhorn, A.R.

1984-01-01

This chapter describes neutral beam injection into the Doublet III tokamak for plasma heating experiments. Cryopanels employed in the beamline vacuum pumping system are force flow cooled to 3.8 K by a closed loop refrigeration system. Topics considered include beamline description, cryosystem description, system characteristics, and operational history. Evaluation of the first beamline was carried out using a 25 L/h liquefier and a unique reliquefaction heat exchanger to permit subatmospheric operation and panel flow rates of 140 L/h. The system was upgraded for three beamline operation by substitution of a 100 L/h liquefier and more cryogen storage capacity. It is concluded that the cryosystem gives stable operation of three beamline cryopanel arrays with little operator intervention

Solar panel truss mounting systems and methods

Energy Technology Data Exchange (ETDEWEB)

Al-Haddad, Tristan Farris; Cavieres, Andres; Gentry, Russell; Goodman, Joseph; Nolan, Wade; Pitelka, Taylor; Rahimzadeh, Keyan; Brooks, Bradley; Lohr, Joshua; Crooks, Ryan; Porges, Jamie; Rubin, Daniel

2016-06-28

An exemplary embodiment of the present invention provides a solar panel truss mounting system comprising a base and a truss assembly coupled to the base. The truss assembly comprises a first panel rail mount, second panel rail mount parallel to the first panel rail mount, base rail mount parallel to the first and second panel rail mounts, and a plurality of support members. A first portion of the plurality of support members extends between the first and second panel rail mounts. A second portion of the plurality of support members extends between the first panel rail mount and the base rail mount. A third portion of the plurality of support members extends between the second panel rail mount and the base rail mount. The system can further comprise a plurality of connectors for coupling a plurality of photovoltaic solar panels to the truss assembly.

Solar panel truss mounting systems and methods

Energy Technology Data Exchange (ETDEWEB)

Al-Haddad, Tristan Farris; Cavieres, Andres; Gentry, Russell; Goodman, Joseph; Nolan, Wade; Pitelka, Taylor; Rahimzadeh, Keyan; Brooks, Bradley; Lohr, Joshua; Crooks, Ryan; Porges, Jamie; Rubin, Daniel

2018-01-30

An exemplary embodiment of the present invention provides a solar panel truss mounting system comprising a base and a truss assembly coupled to the base. The truss assembly comprises a first panel rail mount, second panel rail mount parallel to the first panel rail mount, base rail mount parallel to the first and second panel rail mounts, and a plurality of support members. A first portion of the plurality of support members extends between the first and second panel rail mounts. A second portion of the plurality of support members extends between the first panel rail mount and the base rail mount. A third portion of the plurality of support members extends between the second panel rail mount and the base rail mount. The system can further comprise a plurality of connectors for coupling a plurality of photovoltaic solar panels to the truss assembly.

Solar panel truss mounting systems and methods

Science.gov (United States)

Al-Haddad, Tristan Farris; Cavieres, Andres; Gentry, Russell; Goodman, Joseph; Nolan, Wade; Pitelka, Taylor; Rahimzadeh, Keyan; Brooks, Bradley; Lohr, Joshua; Crooks, Ryan; Porges, Jamie; Rubin, Daniel

2015-10-20

An exemplary embodiment of the present invention provides a solar panel truss mounting system comprising a base and a truss assembly coupled to the base. The truss assembly comprises a first panel rail mount, second panel rail mount parallel to the first panel rail mount, base rail mount parallel to the first and second panel rail mounts, and a plurality of support members. A first portion of the plurality of support members extends between the first and second panel rail mounts. A second portion of the plurality of support members extends between the first panel rail mount and the base rail mount. A third portion of the plurality of support members extends between the second panel rail mount and the base rail mount. The system can further comprise a plurality of connectors for coupling a plurality of photovoltaic solar panels to the truss assembly.

Graphite/epoxy orthogrid panel fabrication

Science.gov (United States)

Lager, J. R.

1978-01-01

The structural concept considered for a spacecraft body structure is a grid stiffened skin with a skin laminate configuration and the stiffener grid geometry selected to best suit the design requirements. The orthogrid panel developed weighs 0.55 lb/sq ft and resisted an ultimate in-plane shear load of 545 lbf/in. The basic concept of a grid stiffener composite panel is that a relatively thin skin is reinforced with a gridwork of stiffeners so that the overall panel can resist design loads without becoming structurally unstable or being overstressed. The main feature of the orthogrid panel design is that it provides the potential for low cost structural panels when advanced to the production phase. The most innovative part of the fabrication method is the foam/fiberglass stiffener web grid billet fabrication and machining to size.

Report to the Nuclear Regulatory Commission from the staff panel on the Commission's determination of an Extraordinary Nuclear Occurrence (ENO)

International Nuclear Information System (INIS)

1980-01-01

The Panel finds that the first criterion, pertaining to whether the accident caused a discharge of radioactive material or levels of radiation offsite as defined in 10 CFR 140.84, has not been met. It further finds that there is presently insufficient information to support any definitive finding as to whether or not the second criterion, relating to damage to persons or property offsite as defined in 10 CFR 140.85, has been met. Since the Panel has not found that both criteria have been met, it recommends that the Commission determine that the accident at Three Mile Island did not constitute an extraordinary nuclear occurrence

Report to the Nuclear Regulatory Commission from the staff panel on the Commission's determination of an Extraordinary Nuclear Occurrence (ENO)

Energy Technology Data Exchange (ETDEWEB)

None

1980-01-01

The Panel finds that the first criterion, pertaining to whether the accident caused a discharge of radioactive material or levels of radiation offsite as defined in 10 CFR 140.84, has not been met. It further finds that there is presently insufficient information to support any definitive finding as to whether or not the second criterion, relating to damage to persons or property offsite as defined in 10 CFR 140.85, has been met. Since the Panel has not found that both criteria have been met, it recommends that the Commission determine that the accident at Three Mile Island did not constitute an extraordinary nuclear occurrence.

Acoustically Tailored Composite Rotorcraft Fuselage Panels

Science.gov (United States)

Hambric, Stephen; Shepherd, Micah; Koudela, Kevin; Wess, Denis; Snider, Royce; May, Carl; Kendrick, Phil; Lee, Edward; Cai, Liang-Wu

2015-01-01

A rotorcraft roof sandwich panel has been redesigned to optimize sound power transmission loss (TL) and minimize structure-borne sound for frequencies between 1 and 4 kHz where gear meshing noise from the transmission has the most impact on speech intelligibility. The roof section, framed by a grid of ribs, was originally constructed of a single honeycomb core/composite face sheet panel. The original panel has coincidence frequencies near 700 Hz, leading to poor TL across the frequency range of 1 to 4 kHz. To quiet the panel, the cross section was split into two thinner sandwich subpanels separated by an air gap. The air gap was sized to target the fundamental mass-spring-mass resonance of the double panel system to less than 500 Hz. The panels were designed to withstand structural loading from normal rotorcraft operation, as well as 'man-on-the-roof' static loads experienced during maintenance operations. Thin layers of VHB 9469 viscoelastomer from 3M were also included in the face sheet ply layups, increasing panel damping loss factors from about 0.01 to 0.05. Measurements in the NASA SALT facility show the optimized panel provides 6-11 dB of acoustic transmission loss improvement, and 6-15 dB of structure-borne sound reduction at critical rotorcraft transmission tonal frequencies. Analytic panel TL theory simulates the measured performance quite well. Detailed finite element/boundary element modeling of the baseline panel simulates TL slightly more accurately, and also simulates structure-borne sound well.

Paneling architectural freeform surfaces

KAUST Repository

Eigensatz, Michael; Kilian, Martin; Schiftner, Alexander; Mitra, Niloy J.; Pottmann, Helmut; Pauly, Mark

2010-01-01

with a selected technology at reasonable cost, while meeting the design intent and achieving the desired aesthetic quality of panel layout and surface smoothness. The production of curved panels is mostly based on molds. Since the cost of mold fabrication

IgE and IgG cross-reactivity among Lol p I and Lol p II/III. Identification of the C-termini of Lol p I, II, and III as cross-reactive structures.

Science.gov (United States)

van Ree, R; van Leeuwen, W A; van den Berg, M; Weller, H H; Aalberse, R C

1994-04-01

In this study, the homologous C-termini of Lol p I, Lol p II, and Lol p III were shown to contain cross-reactive B-cell epitopes. This was demonstrated by inhibition studies with purified Lol p I, II, and III and synthetic peptides of their C-termini. It was ruled out that the observed cross-reactivity was caused by cross-contamination of the purified allergens. Both human IgE and IgG bound to the C-terminus of Lol p I. These antibodies were cross-reactive with Lol p II and, more specifically, with its C-terminus. Within a small panel of allergic patients, no cross-reactivity with Lol p III was found. A hyperimmune polyclonal rabbit antiserum against Lol p I also recognized the Lol p I C-terminus. As for human antibodies, cross-reactivity with Lol p II and its C-terminus was demonstrated. Cross-reactivity with Lol p III was demonstrated with C-terminal peptides, but not with native Lol p III. A polyclonal rabbit antiserum against Lol p II bound to the C-terminal peptides of both Lol p II and III. This binding was inhibited with Lol p I, confirming that cross-reactive structures exist not only on the C-termini of Lol p II and Lol p I, but also of Lol p III and Lol p I. The existence of cross-reactivity between Lol p I and Lol p II and III possibly contributes to the frequently observed cosensitization for these allergens in grass-pollen-allergic patients.

Solar-Panel Dust Accumulation and Cleanings

Science.gov (United States)

2005-01-01

Air-fall dust accumulates on the solar panels of NASA's Mars Exploration Rovers, reducing the amount of sunlight reaching the solar arrays. Pre-launch models predicted steady dust accumulation. However, the rovers have been blessed with occasional wind events that clear significant amounts of dust from the solar panels. This graph shows the effects of those panel-cleaning events on the amount of electricity generated by Spirit's solar panels. The horizontal scale is the number of Martian days (sols) after Spirit's Jan. 4, 2005, (Universal Time) landing on Mars. The vertical scale indicates output from the rover's solar panels as a fraction of the amount produced when the clean panels first opened. Note that the gradual declines are interrupted by occasional sharp increases, such as a dust-cleaning event on sol 420.

Panel fabrication utilizing GaAs solar cells

Science.gov (United States)

Mardesich, N.

1984-01-01

The development of the GaAs solar cells for space applications is described. The activities in the fabrication of GaAs solar panels are outlined. Panels were fabricated while introducing improved quality control, soldering laydown and testing procedures. These panels include LIPS II, San Marco Satellite, and a low concentration panel for Rockwells' evaluation. The panels and their present status are discussed.

Attic Retrofits Using Nail-Base Insulated Panels

Energy Technology Data Exchange (ETDEWEB)

Mallay, David [Home Innovation Research Labs; Kochkin, Vladimir [Home Innovation Research Labs

2018-03-26

This project developed and demonstrated a roof/attic energy retrofit solution using nail-base insulated panels for existing homes where traditional attic insulation approaches are not effective or feasible. Nail-base insulated panels (retrofit panels) consist of rigid foam insulation laminated to one face of a wood structural panel. The prefabricated panels are installed above the existing roof deck during a reroofing effort.

Las diferencias en los criterios diagnósticos de síndrome metabólico son útiles para identificar sujetos en riesgo, pero pierden relevancia en pacientes con enfermedad coronaria Differences in metabolic syndrome diagnostic criteria are useful for identifying risk subjects, but loose relevance in patients with coronary disease

Directory of Open Access Journals (Sweden)

Patricio López-Jaramillo

2006-08-01

Full Text Available Antecedentes: actualmente existe controversia con respecto a la existencia del síndrome metabólico como una entidad independiente y además existen diferencias en los criterios diagnósticos propuestos para su diagnóstico. Objetivo: determinar si existen diferencias en la frecuencia de diagnóstico de síndrome metabólico al utilizar los criterios del Adult Treatment Panel III (ATPIII y la International Diabetes Federation (IDF en la población latinoamericana con y sin enfermedad aterosclerótica coronaria. Diseño-método: estudio transversal analítico. Se incluyeron 265 hombres, 166 sin enfermedad arterial coronaria (-EAC y 99 hombres con manifestaciones clínicas sugestivas de enfermedad arterial coronaria (+EAC de los cuales 36,3% tenían demostración angiográfica de enfermedad arterial coronaria luminal. Se realizó un examen físico completo y determinaciones de glicemia y perfil lipídico. Se aplicaron los criterios de la ATPIII y de la IDF para el diagnóstico de síndrome metabólico y se calculó su frecuencia en cada uno de los grupos. Resultados: en los dos grupos estudiados la aplicación de los criterios del ATPIII registró menores frecuencias de síndrome metabólico que con los criterios de la IDF; sin embargo esta diferencia sólo alcanzó significancia en el grupo de pacientes sin antecedente de enfermedad arterial coronaria (-EAC (IDF= 33,1% vs. ATP-III= 13,4% p=0,01 +EAC (IDF= 52,2% vs. ATP-III= 47,2% p= 0,2. Conclusiones: estos resultados demuestran que la incorporación de la obesidad central dentro de los criterios diagnósticos para síndrome metabólico y la definición de puntos de corte propios para cada región, es importante en la identificación de latinoamericanos con síndrome metabólico.Antecedents: there is actually a controversy with regard to the existence of metabolic syndrome as an independent entity and there are also differences in the criteria proposed for its diagnosis. Objective: to determine

Analysing sensory panel performance in a proficiency test using the PanelCheck software

DEFF Research Database (Denmark)

Tomic, O.; Luciano, G.; Nilsen, A.

2010-01-01

Check software, a workflow is proposed that guides the user through the data analysis process. This allows practitioners and non-statisticians to get an overview over panel performances in a rapid manner without the need to be familiar with details on the statistical methods. Visualisation of data analysis...... results plays an important role as this provides a time saving and efficient way of screening and investigating sensory panel performances. Most of the statistical methods used in this paper are available in the open source software PanelCheck, which may be downloaded and used for free....

Safety/relief valve quencher loads: evaluation for BWR Mark II and III containments

International Nuclear Information System (INIS)

Su, T.M.

1982-10-01

Boiling water reactor (BWR) plants are equipped with safety/relief valves (SRVs) to protect the reactor from overpressurization. Plant operational transients, such as turbine trips, will actuate the SRV. Once the SRV opens, the air column within the partially submerged discharge line is compressed by the high-pressure steam released from the reactor. The compressed air discharged into the suppression pool produces high-pressure bubbles. Oscillatory expansion and contraction of these bubbles create hydrodynamic loads on the containment structures, piping, and equipment inside containment. This report presents the results of the staff's evaluation of SRV loads. The evaluation, however, is limited to the quencher devices used in Mark II and III containments. With respect to Mark I containments, the SRV acceptance criteria are presented in NUREG-0661 issued July 1980. The staff acceptance criteria for SRV loads for Mark II and III containments are presented in this report

An Investigation of Alerting and Prioritization Criteria for Sense and Avoid (SAA)

Science.gov (United States)

2013-10-01

TECHNICAL REPORT RDMR-TM-13-01 AN INVESTIGATION OF ALERTING AND PRIORITIZATION CRITERIA FOR SENSE AND AVOID ( SAA ...OFFICIAL ENDORSEMENT OR APPROVAL OF THE USE OF SUCH COMMERCIAL HARDWARE OR SOFTWARE . i/ii (Blank) REPORT DOCUMENTATION PAGE Form Approved...burden to Washington Headquarters Services , Directorate for Information Operations and Reports, 1215 Jefferson Davis Highway, Suite 1204, Arlington

Complexation of trivalent actinides and lanthanides with hydrophilic N-donor ligands for Am(III)/Cm(III) and An(III)/Ln(III) separation; Komplexierung von trivalenten Actiniden und Lanthaniden mit hydrophilen N-Donorliganden zur Am(III)/Cm(III)- bzw. An(III)/Ln(III)-Trennung

Energy Technology Data Exchange (ETDEWEB)

Wagner, Christoph

2017-07-24

The implementation of actinide recycling processes is considered in several countries, aiming at the reduction of long-term radiotoxicity and heat load of used nuclear fuel. This requires the separation of the actinides from the fission and corrosion products. The separation of the trivalent actinides (An(III)) Am(III) and Cm(III), however, is complicated by the presence of the chemically similar fission lanthanides (Ln(III)). Hydrophilic N-donor ligands are employed as An(III) or Am(III) selective complexing agents in solvent extraction to strip An(III) or Am(III) from an organic phase loaded with An(III) and Ln(III). Though they exhibit excellent selectivity, the complexation chemistry of these ligands and the complexes formed during solvent extraction are not sufficiently characterized. In the present thesis the complexation of An(III) and Ln(III) with hydrophilic N-donor ligands is studied by time resolved laser fluorescence spectroscopy (TRLFS), UV/Vis, vibronic sideband spectroscopy and solvent extraction. TRLFS studies on the complexation of Cm(III) and Eu(III) with the Am(III) selective complexing agent SO{sub 3}-Ph-BTBP (tetrasodium 3,3{sup '},3'',3{sup '''}-([2,2{sup '}-bipyridine]-6,6{sup '}-diylbis(1,2,4-triazine-3,5,6-triyl)) tetrabenzenesulfonate) revealed the formation of [M(SO{sub 3}-Ph-BTBP){sub n}]{sup (4n-3)-} complexes (M = Cm(III), Eu(III); n = 1, 2). The conditional stability constants were determined in different media yielding two orders of magnitude larger β{sub 2}-values for the Cm(III) complexes, independently from the applied medium. A strong impact of ionic strength on the stability and stoichiometry of the formed complexes was identified, resulting from the stabilization of the pentaanionic [M(SO{sub 3}-Ph-BTBP){sub 2}]{sup 5-} complex with increasing ionic strength. Thermodynamic studies of Cm(III)-SO{sub 3}-Ph-BTBP complexation showed that the proton concentration of the applied medium impacts

ACR Appropriateness Criteria® rib fractures.

Science.gov (United States)

Henry, Travis S; Kirsch, Jacobo; Kanne, Jeffrey P; Chung, Jonathan H; Donnelly, Edwin F; Ginsburg, Mark E; Heitkamp, Darel E; Kazerooni, Ella A; Ketai, Loren H; McComb, Barbara L; Parker, J Anthony; Ravenel, James G; Restrepo, Carlos Santiago; Saleh, Anthony G; Shah, Rakesh D; Steiner, Robert M; Suh, Robert D; Mohammed, Tan-Lucien H

2014-11-01

Rib fracture is the most common thoracic injury, present in 10% of all traumatic injuries and almost 40% of patients who sustain severe nonpenetrating trauma. Although rib fractures can produce significant morbidity, the diagnosis of associated complications (such as pneumothorax, hemothorax, pulmonary contusion, atelectasis, flail chest, cardiovascular injury, and injuries to solid and hollow abdominal organs) may have a more significant clinical impact. When isolated, rib fractures have a relatively low morbidity and mortality, and failure to detect isolated rib fractures does not necessarily alter patient management or outcome in uncomplicated cases. A standard posteroanterior chest radiograph should be the initial, and often the only, imaging test required in patients with suspected rib fracture after minor trauma. Detailed radiographs of the ribs rarely add additional information that would change treatment, and, although other imaging tests (eg, computed tomography, bone scan) have increased sensitivity for detection of rib fractures, there are little data to support their use. The American College of Radiology Appropriateness Criteria are evidence-based guidelines for specific clinical conditions that are reviewed every 3 years by a multidisciplinary expert panel. The guideline development and review process include an extensive analysis of current medical literature from peer-reviewed journals and the application of a well-established consensus methodology (modified Delphi) to rate the appropriateness of imaging and treatment procedures by the panel. In those instances in which evidence is lacking or not definitive, expert opinion may be used to recommend imaging or treatment.

Racial and ethnic disparities in meeting MTM eligibility criteria among patients with asthma.

Science.gov (United States)

Lu, Degan; Qiao, Yanru; Johnson, Karen C; Wang, Junling

2017-06-01

Asthma is one of the most frequently targeted chronic diseases in the medication therapy management (MTM) programs of the Medicare prescription drug (Part D) benefits. Although racial and ethnic disparities in meeting eligibility criteria for MTM services have been reported, little is known about whether there would be similar disparities among adults with asthma in the United States. Adult patients with asthma (age ≥ 18) from Medical Expenditure Panel Survey (2011-2012) were analyzed. Bivariate analyses were conducted to compare the proportions of patients who would meet Medicare MTM eligibility criteria between non-Hispanic Blacks (Blacks), Hispanics and non-Hispanic Whites (Whites). Survey-weighted logistic regression was performed to adjust for patient characteristics. Main and sensitivity analyses were conducted to cover the entire range of the eligibility thresholds used by Part D plans in 2011-2012. The sample included 4,455 patients with asthma, including 2,294 Whites, 1,218 Blacks, and 943 Hispanics. Blacks and Hispanics had lower proportions of meeting MTM eligibility criteria than did Whites (P asthma. Future studies should examine the implications of such disparities on health outcomes of patients with asthma and explore alternative MTM eligibility criteria.

Mounting clips for panel installation

Science.gov (United States)

Cavieres, Andres; Al-Haddad, Tristan; Goodman, Joseph; Valdes, Francisco

2017-02-14

An exemplary mounting clip for removably attaching panels to a supporting structure comprises a base, spring locking clips, a lateral flange, a lever flange, and a spring bonding pad. The spring locking clips extend upwardly from the base. The lateral flange extends upwardly from a first side of the base. The lateral flange comprises a slot having an opening configured to receive at least a portion of one of the one or more panels. The lever flange extends outwardly from the lateral flange. The spring bonding flange extends downwardly from the lever flange. At least a portion of the first spring bonding flange comprises a serrated edge for gouging at least a portion of the one or more panels when the one or more panels are attached to the mounting clip to electrically and mechanically couple the one or more panels to the mounting clip.

ALDS 1978 panel review. [PNL

Energy Technology Data Exchange (ETDEWEB)

Hall, D.L. (ed.)

1979-08-01

Pacific Northwest Laboratory (PNL) is examining the analysis of large data sets (ALDS). After one year's work, a panel was convened to evaluate the project. This document is the permanent record of that panel review. It consists of edited transcripts of presentations made to the panel by the PNL staff, a summary of the responses of the panel to these presentations, and PNL's plans for the development of the ALDS project. The representations of the PNL staff described various aspects of the project and/or the philosophy surrounding the project. Supporting materials appear in appendixes. 20 figures, 4 tables. (RWR)

Advanced solar panel designs

Science.gov (United States)

Ralph, E. L.; Linder, E.

1995-01-01

This paper describes solar cell panel designs that utilize new hgih efficiency solar cells along with lightweight rigid panel technology. The resulting designs push the W/kg and W/sq m parameters to new high levels. These new designs are well suited to meet the demand for higher performance small satellites. This paper reports on progress made on two SBIR Phase 1 contracts. One panel design involved the use of large area (5.5 cm x 6.5 cm) GaAs/Ge solar cells of 19% efficiency combined with a lightweight rigid graphite fiber epoxy isogrid substrate configuration. A coupon (38 cm x 38 cm) was fabricated and tested which demonstrated an array specific power level of 60 W/kg with a potential of reaching 80 W/kg. The second panel design involved the use of newly developed high efficiency (22%) dual junction GaInP2/GaAs/Ge solar cells combined with an advanced lightweight rigid substrate using aluminum honeycomb core with high strength graphite fiber mesh facesheets. A coupon (38 cm x 38 cm) was fabricated and tested which demonstrated an array specific power of 105 W/kg and 230 W/sq m. This paper will address the construction details of the panels and an a analysis of the component weights. A strawman array design suitable for a typical small-sat mission is described for each of the two panel design technologies being studied. Benefits in respect to weight reduction, area reduction, and system cost reduction are analyzed and compared to conventional arrays.

Energy absorption capabilities of composite sandwich panels under blast loads

Science.gov (United States)

Sankar Ray, Tirtha

As blast threats on military and civilian structures continue to be a significant concern, there remains a need for improved design strategies to increase blast resistance capabilities. The approach to blast resistance proposed here is focused on dissipating the high levels of pressure induced during a blast through maximizing the potential for energy absorption of composite sandwich panels, which are a competitive structural member type due to the inherent energy absorption capabilities of fiber reinforced polymer (FRP) composites. Furthermore, the middle core in the sandwich panels can be designed as a sacrificial layer allowing for a significant amount of deformation or progressive failure to maximize the potential for energy absorption. The research here is aimed at the optimization of composite sandwich panels for blast mitigation via energy absorption mechanisms. The energy absorption mechanisms considered include absorbed strain energy due to inelastic deformation as well as energy dissipation through progressive failure of the core of the sandwich panels. The methods employed in the research consist of a combination of experimentally-validated finite element analysis (FEA) and the derivation and use of a simplified analytical model. The key components of the scope of work then includes: establishment of quantified energy absorption criteria, validation of the selected FE modeling techniques, development of the simplified analytical model, investigation of influential core architectures and geometric parameters, and investigation of influential material properties. For the parameters that are identified as being most-influential, recommended values for these parameters are suggested in conceptual terms that are conducive to designing composite sandwich panels for various blast threats. Based on reviewing the energy response characteristic of the panel under blast loading, a non-dimensional parameter AET/ ET (absorbed energy, AET, normalized by total energy

Cardio-Metabolic Features of Type 2 Diabetes Subjects Discordant in the Diagnosis of Metabolic Syndrome

Directory of Open Access Journals (Sweden)

Sa Rah Lee

2012-10-01

Full Text Available BackgroundThe aim of this study is to investigate the cardio-metabolic parameters and surrogate markers of insulin resistance in a discordant group of type 2 diabetes (T2DM subjects who satisfy the Adults Treatment Panel (ATP III criteria, but not the International Diabetes Federation (IDF criteria, for metabolic syndrome (MetS.MethodsWe assessed the prevalence of MetS in T2DM subjects (n=167 who were selected from subjects registered at the diabetes center of Dong-A University Medical Center. We used the ATP III criteria and the IDF criteria for the diagnosis of MetS and sorted the subjects into 2 MetS groups: one group diagnosed per ATP III criteria (MetSa and one diagnosed per IDF criteria (MetSi. We then compared the clinical characteristics, metabolic parameters (homeostasis model assessment of insulin resistance, aspartate aminotransferase, alanine aminotransferase, and uric acid values and co-morbidities (prevalence of microalbuminuria, fatty liver, and cardiovascular disease between the MetSa, MetSi, and discordant MetS groups.ResultsThe prevalence of MetS in the MetSa group (73.6% was higher than in the MetSi group (62.2%. The MetS prevalence in the discordant group was 11.4%. The discordant group showed no significant differences in clinical characteristics (except waist circumference and body mass index, metabolic parameters, or prevalence of co-morbidities, as compared with subjects with MetS by both criteria.ConclusionIn this study, cardio-metabolic features of the subjects diagnosed with MetS using ATP III criteria, but not IDF criteria, are not significantly different from those of subjects diagnosed with MetS using both criteria.

Complexes of 4-chlorophenoxyacetates of Nd(III), Gd(III) and Ho(III)

International Nuclear Information System (INIS)

Ferenc, W.; Bernat, M; Gluchowska, H.W.; Sarzynski, J.

2010-01-01

The complexes of 4-chlorophenoxyacetates of Nd(III), Gd(III) and Ho(III) have been synthesized as polycrystalline hydrated solids, and characterized by elemental analysis, spectroscopy, magnetic studies and also by X-ray diffraction and thermogravimetric measurements. The analysed complexes have the following colours: violet for Nd(III), white for Gd(III) and cream for Ho(III) compounds. The carboxylate groups bind as bidentate chelating (Ho) or bridging ligands (Nd, Gd). On heating to 1173K in air the complexes decompose in several steps. At first, they dehydrate in one step to form anhydrous salts, that next decompose to the oxides of respective metals. The gaseous products of their thermal decomposition in nitrogen were also determined and the magnetic susceptibilities were measured over the temperature range of 76-303K and the magnetic moments were calculated. The results show that 4-chlorophenoxyacetates of Nd(III), Gd(III) and Ho(III) are high-spin complexes with weak ligand fields. The solubility value in water at 293K for analysed 4-chlorophenoxyacetates is in the order of 10 -4 mol/dm 3 . (author)

ACR Appropriateness Criteria® Tinnitus.

Science.gov (United States)

Kessler, Marcus M; Moussa, Marwan; Bykowski, Julie; Kirsch, Claudia F E; Aulino, Joseph M; Berger, Kevin L; Choudhri, Asim F; Fife, Terry D; Germano, Isabelle M; Kendi, A Tuba; Kim, Jeffrey H; Luttrull, Michael D; Nunez, Diego; Shah, Lubdha M; Sharma, Aseem; Shetty, Vilaas S; Symko, Sophia C; Cornelius, Rebecca S

2017-11-01

Tinnitus is the perception of sound in the absence of an external source. It is a common symptom that can be related to hearing loss and other benign causes. However, tinnitus may be disabling and can be the only symptom in a patient with a central nervous system process disorder. History and physical examination are crucial first steps to determine the need for imaging. CT and MRI are useful in the setting of pulsatile tinnitus to evaluate for an underlying vascular anomaly or abnormality. If there is concomitant asymmetric hearing loss, neurologic deficit, or head trauma, imaging should be guided by those respective ACR Appropriateness Criteria ® documents, rather than the presence of tinnitus. Imaging is not usually appropriate in the evaluation of subjective, nonpulsatile tinnitus that does not localize to one ear. The American College of Radiology Appropriateness Criteria are evidence-based guidelines for specific clinical conditions that are reviewed annually by a multidisciplinary expert panel. The guideline development and revision include an extensive analysis of current medical literature from peer reviewed journals and the application of well-established methodologies (RAND/UCLA Appropriateness Method and Grading of Recommendations Assessment, Development, and Evaluation or GRADE) to rate the appropriateness of imaging and treatment procedures for specific clinical scenarios. In those instances where evidence is lacking or equivocal, expert opinion may supplement the available evidence to recommend imaging or treatment. Copyright © 2017 American College of Radiology. Published by Elsevier Inc. All rights reserved.

Material failures observed in the Doublet III neutral beamlines

International Nuclear Information System (INIS)

Bailey, E.W.; Colleraine, A.; Doll, D.; Grunloh, H.; Kim, J.; Langhorn, A.; Thurgood, B.

1983-01-01

The Doublet III neutral beam injectors consist of three separable spools two meters in diameter by four meters long overall when assembled. Contained within these spools are the neutralizers, ion dumps, deflecting magnet, calorimeter dumps, cryogenic panels and beam scraping collimators. To date three beamlines are in operation on Doublet III, and the beams have accumulated operating time of approximately 32 months, with the oldest having been in operation for 18 months. During this time operation of DIII with the neutral beam sources has demonstrated the following: 7.8 MW injected neutrals from three beamlines (6 sources), high β (4.5%), and non-circular plasma shape. The sources have also exibited a very reliable injected shot history. Material failures encountered during the operation of DIII N.B. injectors and the solutions to these failures are described. Failures include cracking of the neutralizer exit collimator due to heating cycles, failure of cyropanel support rods due to cooling cycles, failure of the sliding drive of the moveable calorimeter due to friction

Panel acoustic contribution analysis.

Science.gov (United States)

Wu, Sean F; Natarajan, Logesh Kumar

2013-02-01

Formulations are derived to analyze the relative panel acoustic contributions of a vibrating structure. The essence of this analysis is to correlate the acoustic power flow from each panel to the radiated acoustic pressure at any field point. The acoustic power is obtained by integrating the normal component of the surface acoustic intensity, which is the product of the surface acoustic pressure and normal surface velocity reconstructed by using the Helmholtz equation least squares based nearfield acoustical holography, over each panel. The significance of this methodology is that it enables one to analyze and rank relative acoustic contributions of individual panels of a complex vibrating structure to acoustic radiation anywhere in the field based on a single set of the acoustic pressures measured in the near field. Moreover, this approach is valid for both interior and exterior regions. Examples of using this method to analyze and rank the relative acoustic contributions of a scaled vehicle cabin are demonstrated.

Advanced Solar Panel Designs

Science.gov (United States)

Ralph, E. L.; Linder, E. B.

1995-01-01

Solar panel designs that utilize new high-efficiency solar cells and lightweight rigid panel technologies are described. The resulting designs increase the specific power (W/kg) achievable in the near-term and are well suited to meet the demands of higher performance small satellites (smallsats). Advanced solar panel designs have been developed and demonstrated on two NASA SBIR contracts at Applied Solar. The first used 19% efficient, large area (5.5 cm x 6.5 cm) GaAs/Ge solar cells with a lightweight rigid graphite epoxy isogrid substrate configuration. A 1,445 sq cm coupon was fabricated and tested to demonstrate 60 W/kg with a high potential of achieving 80 W/kg. The second panel design used new 22% efficiency, dual-junction GaInP2/GaAs/Ge solar cells combined with a lightweight aluminum core/graphite fiber mesh facesheet substrate. A 1,445 sq cm coupon was fabricated and tested to demonstrate 105 W/kg with the potential of achieving 115 W/kg.

Delirium diagnosis defined by cluster analysis of symptoms versus diagnosis by DSM and ICD criteria: diagnostic accuracy study.

Science.gov (United States)

Sepulveda, Esteban; Franco, José G; Trzepacz, Paula T; Gaviria, Ana M; Meagher, David J; Palma, José; Viñuelas, Eva; Grau, Imma; Vilella, Elisabet; de Pablo, Joan

2016-05-26

Information on validity and reliability of delirium criteria is necessary for clinicians, researchers, and further developments of DSM or ICD. We compare four DSM and ICD delirium diagnostic criteria versions, which were developed by consensus of experts, with a phenomenology-based natural diagnosis delineated using cluster analysis of delirium features in a sample with a high prevalence of dementia. We also measured inter-rater reliability of each system when applied by two evaluators from distinct disciplines. Cross-sectional analysis of 200 consecutive patients admitted to a skilled nursing facility, independently assessed within 24-48 h after admission with the Delirium Rating Scale-Revised-98 (DRS-R98) and for DSM-III-R, DSM-IV, DSM-5, and ICD-10 criteria for delirium. Cluster analysis (CA) delineated natural delirium and nondelirium reference groups using DRS-R98 items and then diagnostic systems' performance were evaluated against the CA-defined groups using logistic regression and crosstabs for discriminant analysis (sensitivity, specificity, percentage of subjects correctly classified by each diagnostic system and their individual criteria, and performance for each system when excluding each individual criterion are reported). Kappa Index (K) was used to report inter-rater reliability for delirium diagnostic systems and their individual criteria. 117 (58.5 %) patients had preexisting dementia according to the Informant Questionnaire on Cognitive Decline in the Elderly. CA delineated 49 delirium subjects and 151 nondelirium. Against these CA groups, delirium diagnosis accuracy was highest using DSM-III-R (87.5 %) followed closely by DSM-IV (86.0 %), ICD-10 (85.5 %) and DSM-5 (84.5 %). ICD-10 had the highest specificity (96.0 %) but lowest sensitivity (53.1 %). DSM-III-R had the best sensitivity (81.6 %) and the best sensitivity-specificity balance. DSM-5 had the highest inter-rater reliability (K =0.73) while DSM-III-R criteria were the least

Inclusion of Population-specific Reference Panel from India to the 1000 Genomes Phase 3 Panel Improves Imputation Accuracy.

Science.gov (United States)

Ahmad, Meraj; Sinha, Anubhav; Ghosh, Sreya; Kumar, Vikrant; Davila, Sonia; Yajnik, Chittaranjan S; Chandak, Giriraj R

2017-07-27

Imputation is a computational method based on the principle of haplotype sharing allowing enrichment of genome-wide association study datasets. It depends on the haplotype structure of the population and density of the genotype data. The 1000 Genomes Project led to the generation of imputation reference panels which have been used globally. However, recent studies have shown that population-specific panels provide better enrichment of genome-wide variants. We compared the imputation accuracy using 1000 Genomes phase 3 reference panel and a panel generated from genome-wide data on 407 individuals from Western India (WIP). The concordance of imputed variants was cross-checked with next-generation re-sequencing data on a subset of genomic regions. Further, using the genome-wide data from 1880 individuals, we demonstrate that WIP works better than the 1000 Genomes phase 3 panel and when merged with it, significantly improves the imputation accuracy throughout the minor allele frequency range. We also show that imputation using only South Asian component of the 1000 Genomes phase 3 panel works as good as the merged panel, making it computationally less intensive job. Thus, our study stresses that imputation accuracy using 1000 Genomes phase 3 panel can be further improved by including population-specific reference panels from South Asia.

Honeycomb metal panel

International Nuclear Information System (INIS)

1979-01-01

Product constituted by a honeycomb metal panel that can be employed to advantage for manufacturing lagging by sandwiching it between two plane sheets, utilized in particular in the nuclear industry where lagging has to have a very long life strength. The honeycomb metal panel is made of an expanded metal extrusion previously cut so as to form, after additional drawing, a honeycomb structure with square or rectangular cells with a plane surface [fr

Exascale Workshop Panel Report Meeting

Energy Technology Data Exchange (ETDEWEB)

Khaleel, Mohammad A.

2010-07-01

The Exascale Review Panel consists of 12 scientists and engineers with experience in various aspects of high-performance computing and its application, development, and management. The Panel hear presentations by several representatives of the workshops and town meetings convened over the past few years to examine the need for exascale computation capability and the justification for a U.S. Department of Energy (DOE) program to develop such capability. This report summarizes information provided by the presenters and substantial written reports to the Panel in advance of the meeting in Washington D.C. on January 19-20, 2010. The report also summarizes the Panel's conclusions with regard to the justification of a DOE-led exascale initiative.

EFSA CEF Panel (EFSA Panel on Food Contact Materials, Enzymes, Flavourings and Processing Aids), 2015. Scientific Opinion on Flavouring Group Evaluation 303, Revision 1 (FGE.303Rev1): Spilanthol from chemical group 30

DEFF Research Database (Denmark)

Beltoft, Vibe Meister; Nørby, Karin Kristiane

The Panel on Food Contact Materials, Enzymes, Flavourings and Processing Aids of the European Food Safety Authority was requested to evaluate the flavouring substance spilanthol [FL-no: 16.121] in Flavouring Group Evaluation 303, Revision 1, using the Procedure according to Commission Regulation...... (MSDI) approach. Besides the safety assessment of the flavouring substance, the specifications for the material of commerce have also been considered. Adequate specifications including complete purity criteria and identity for the material of commerce have been provided for the candidate substance....

Analysis of differences in fuel safety criteria for WWER and western PWR nuclear power plants

International Nuclear Information System (INIS)

2003-11-01

In 2001 the OECD issued a report of the NEA/CSNI (Committee on the Safety of Nuclear Installations) Task Force on the existing safety criteria for reactor fuel for western LWR nuclear power plants (both for PWRs and BWRs) under new design elements. Likewise in 2001, the IAEA released a report by a Working Group on the existing safety criteria for reactor fuel for WWER nuclear power plants under new design requirements. However, it was found that it was not possible to compare the two sets of criteria on the basis upon which they had been established. Therefore, the IAEA initiated an assessment of the common features and differences in fuel safety criteria between plants of eastern and western design, focusing on western PWRs and eastern WWER reactors. Between October 2000 and November 2001, the IAEA organized several workshops with representatives from eastern and western European countries in which the current fuel safety related criteria for PWR and WWER reactors were reviewed and compared. The workshops brought together expert representatives from the Russian Federation, from the Ukraine and from western countries that operate PWRs. The first workshop focused on a general overview of the fuel safety criteria in order for all representatives to appreciate the various criteria and their respective bases. The second workshop (which involved one western and one eastern expert) concentrated on addressing and explaining the differences observed, and documenting all these results in preparation for a panel discussion. This panel discussion took place during the third workshop, where the previously obtained results were reviewed in detail and final recommendations were made. This report documents the findings of the workshops. It highlights the common features and differences between PWR and WWER fuel, and may serve as a general basis for the safety evaluation of these fuels. Therefore, it will be very beneficial for licensing activities for PWR and WWER plants, as it

Improving regulatory effectiveness in Federal/State siting actions. Success factor evaluation panel. Final report

International Nuclear Information System (INIS)

Haggard, J.

1977-06-01

An independent appraisal of the factors that determine efficiency in reaching environmental decisions with respect to nuclear facilities was addressed. The Panel recommended to substitute 'effectiveness' for 'efficiency.' Thus, an effective decision is: 'A timely final decision, that provides for necessary change, consistent with societal objectives and law, and which is equitable and practical, and is based upon fully and candidly expressed premises utilizing a commonly available data base.' The measurement criteria for evaluating the effectiveness of the environmental decision making process are: timely decision, final decision, provision for change, consistency with societal goals and law, equitable, practical, fully and candidly expressed premises, commonly available data base, and public confidence. The Panel evaluated the 8 policies proposed by NRC staff as essential to licensing reform: national fuels policy, regional review, early disclosure, State role, technical assistance to State, role of utilities, radiation health and safety, and modification of the Atomic Energy Act. The five NRC scenarios were evaluated in terms of regulatory effectiveness

Grounds of two positions photovoltaic panels

OpenAIRE

Castán Fortuño, Fernando

2008-01-01

The objective of this Master Thesis is to find the optimum positioning for a two positions photovoltaic panel. Hence, it will be implemented a model in order to optimize the energy of the sun that the photovoltaic panel is receiving by its positioning. Likewise this project will include the comparison with other photovoltaic panel systems as the single position photovoltaics panels. Ultimately, it is also going to be designed a system array for the optimized model of two positions photovoltai...

Orbiter radiator panel solar focusing test

Science.gov (United States)

Howell, H. R.; Rankin, J. G.

1983-01-01

Test data are presented which define the area around the Orbiter radiator panels for which the solar reflections are concentrated to one-sun or more. The concave shape of the panels and their specular silver/Teflon coating causes focusing of the reflected solar energy which could have adverse heating effects on equipment or astronaut extravehicular activity (EVA) in the vicinity of the radiator panels. A room ambient test method was utilized with a one-tenth scale model of the radiator panels.

Diagnostic efficiency of demographically corrected Wechsler Adult Intelligence Scale-III and Wechsler Memory Scale-III indices in moderate to severe traumatic brain injury and lower education levels.

Science.gov (United States)

Walker, Alexandra J; Batchelor, Jennifer; Shores, E Arthur; Jones, Mike

2009-11-01

Despite the sensitivity of neuropsychological tests to educational level, improved diagnostic accuracy for demographically corrected scores has yet to be established. Diagnostic efficiency statistics of Wechsler Adult Intelligence Scale-III (WAIS-III) and Wechsler Memory Scale-III (WMS-III) indices that were corrected for education, sex, and age (demographically corrected) were compared with age corrected indices in individuals aged 16 to 75 years with moderate to severe traumatic brain injury (TBI) and 12 years or less education. TBI participants (n = 100) were consecutive referrals to an outpatient rehabilitation service and met careful selection criteria. Controls (n = 100) were obtained from the WAIS-III/WMS-III standardization sample. Demographically corrected indices did not provide higher diagnostic efficiency than age corrected indices and this result was supported by reanalysis of the TBI group against a larger and unmatched control group. Processing Speed Index provided comparable diagnostic accuracy to that of combined indices. Demographically corrected indices were associated with higher cut-scores to maximize overall classification, reflecting the upward adjustment of those scores in a lower education sample. This suggests that, in clinical practice, the test results of individuals with limited education may be more accurately interpreted with the application of demographic corrections. Diagnostic efficiency statistics are presented, and future research directions are discussed.

OPTIMASI PEMILIHAN LOKASI FASILITAS PENGOLAHAN LIMBAH ELEKTRONIK (E-WASTE DI INDONESIA DENGAN MODEL ELECTRE III

Directory of Open Access Journals (Sweden)

Pertiwi Andarani

2015-01-01

Full Text Available Limbah elektronik adalah masalah yang muncul di Indonesia karena mengandung bahan yang berpotensi berbahaya. Dalam rangka menciptakan manajemen yang ramah lingkungan dari limbah elektronik, fasilitas yang memadai diperlukan. Tujuan dari penelitian ini adalah untuk memilih lokasi yang optimal untuk mengembangkan fasilitas pengolahan limbah elektronik (FLPE. Pemilihan lokasi yang optimal dilakukan dengan menggunakan metode model ELECTRE III. ELECTRE adalah keluarga metode analisis keputusan multi-kriteria yang berasal di Eropa. Kriteria yang dipilih untuk analisis ini adalah penduduk setempat, penduduk yang dilayani, persentase belanja bulanan, harga rata-rata rumah tangga per unit, populasi pengangguran, status finansial dari penduduk lokal, jarak dari fasilitas yang telah ada, dan jarak dari pelabuhan terdekat. ELECTRE III membutuhkan penentuan tiga ambang batas, yaitu ambang kelalaian (q, ambang batas preferensi (p, dan ambang veto (v dalam upaya untuk lebih beradaptasi dengan ketidakpastian. Bobot masing-masing kriteria yang ditentukan sesuai dengan kepentingan relatif terhadap kriteria lain. Lokasi optimal untuk FPLE adalah Provinsi Banten berdasarkan model ELECTRE III.   Kata Kunci: limbah elektronik, fasilitas, optimasi, ELECTRE Abstract E-waste is an emerging issue in Indonesia due to its potentially hazardous content and some precious metal. In order to create an environmentally sound management of e-waste, a facility is necessary. The objectives of this study are to to select the optimal location of e-waste dismantling and sorting facility (DSF/FLPE.  The optimal location selection was conducted using the method of ELECTRE III model. ELECTRE is a family of multi-criteria decision analysis methods that originated in Europe. The criteria chosen for this analysis are local population, population served, the percentage of monthly expenditure, average household price per unit, unemployed population, financial status of the local population

Application of Prefabricated Panels for the Energy Retrofit of Portuguese Residential Buildings Facades: A Case Study

Directory of Open Access Journals (Sweden)

Sousa J.

2013-09-01

Full Text Available This article aims to evaluate the potential application of prefabricated panels in energy retrofit of facades in the Portuguese building stock. The fundamentals of this study were part of Annex 50, which was an international ECBCS IEA project, with the purpose of developing an innovative concept of building renovation for the most representative buildings based on prefabricated systems. To analyze the potential application of energy retrofit using prefabricated panels, was important to know the reality of the existing building stock and its morphology. To know the reality of the building stock, an analysis was done based on the existing statistical data and to find the most representative residential buildings, target of the study, three criteria were defined: buildings built before 1990, with 2 to 6 floors and with renovation needs in the exterior envelope.

EFSA CEF Panel (EFSA Panel on Food Contact Materials, Enzymes, Flavourings and Processing Aids), 2015. Scientific Opinion on Flavouring Group Evaluation 21, Revision 5 (FGE.21Rev5): Thiazoles, thiophenes, thiazoline and thienyl derivatives from chemical groups 29 and 30

DEFF Research Database (Denmark)

Nørby, Karin Kristiane; Beltoft, Vibe Meister

The Panel on Food Contact Materials, Enzymes, Flavourings and Processing Aids of the European Food Safety Authority was requested to evaluate 41 flavouring substances in Flavouring Group Evaluation 21, Revision 5, using the Procedure in Commission Regulation (EC) No 1565/2000. This revision...... have also been considered. Adequate specifications, including complete purity criteria and identity for the materials of commerce, have been provided for all 41 candidate substances....

panelcn.MOPS: Copy-number detection in targeted NGS panel data for clinical diagnostics.

Science.gov (United States)

Povysil, Gundula; Tzika, Antigoni; Vogt, Julia; Haunschmid, Verena; Messiaen, Ludwine; Zschocke, Johannes; Klambauer, Günter; Hochreiter, Sepp; Wimmer, Katharina

2017-07-01

Targeted next-generation-sequencing (NGS) panels have largely replaced Sanger sequencing in clinical diagnostics. They allow for the detection of copy-number variations (CNVs) in addition to single-nucleotide variants and small insertions/deletions. However, existing computational CNV detection methods have shortcomings regarding accuracy, quality control (QC), incidental findings, and user-friendliness. We developed panelcn.MOPS, a novel pipeline for detecting CNVs in targeted NGS panel data. Using data from 180 samples, we compared panelcn.MOPS with five state-of-the-art methods. With panelcn.MOPS leading the field, most methods achieved comparably high accuracy. panelcn.MOPS reliably detected CNVs ranging in size from part of a region of interest (ROI), to whole genes, which may comprise all ROIs investigated in a given sample. The latter is enabled by analyzing reads from all ROIs of the panel, but presenting results exclusively for user-selected genes, thus avoiding incidental findings. Additionally, panelcn.MOPS offers QC criteria not only for samples, but also for individual ROIs within a sample, which increases the confidence in called CNVs. panelcn.MOPS is freely available both as R package and standalone software with graphical user interface that is easy to use for clinical geneticists without any programming experience. panelcn.MOPS combines high sensitivity and specificity with user-friendliness rendering it highly suitable for routine clinical diagnostics. © 2017 The Authors. Human Mutation published by Wiley Periodicals, Inc.

FEMA DFIRM Panel Scheme Polygons

Data.gov (United States)

Minnesota Department of Natural Resources — This layer contains information about the Flood Insurance Rate Map (FIRM) panel areas. The spatial entities representing FIRM panels are polygons. The polygon for...

Formation constants of Sm(III), Dy(III), Gd(III), Pr(III) and Nd(III) complexes of tridentate schiff base, 2-[(1H-benzimidazol-2-yl-methylene) amino] phenol

International Nuclear Information System (INIS)

Omprakash, K.L.; Chandra Pal, A.V.; Reddy, M.L.N.

1982-01-01

A new tridentate schiff base, 2- (1H-benzimidazol-2-yl-methylene)amino phenol derived from benzimididazole-2-carbo-xaldehyde and 2-aminophenol has been synthesised and characterised by spectral and analytical data. Proton-ligand formation constants of the schiff base and metal-ligand formation constants of its complexes with Sm(III), Dy(III), Gd(III), Nd(III) and Pr(III) have been determined potentiometrically in 50% (v/v) aqueous dioxane at an ionic strength of 0.1M (NaClO 4 ) and at 25deg C using the Irving-Rossotti titration technique. The order of stability constants (logβ 2 ) is found to be Sm(III)>Dy(III)>Gd(III)>Pr(III)>Nd(III). (author)

Formation constants of Sm(III), Dy(III), Gd(III), Pr(III) and Nd(III) complexes of tridentate schiff base, 2-((1H-benzimidazol-2-yl-methylene) amino) phenol

Energy Technology Data Exchange (ETDEWEB)

Omprakash, K L; Chandra Pal, A V; Reddy, M L.N. [Osmania Univ., Hyderabad (India). Dept. of Chemistry

1982-03-01

A new tridentate schiff base, 2- (1H-benzimidazol-2-yl-methylene)amino phenol derived from benzimididazole-2-carbo-xaldehyde and 2-aminophenol has been synthesised and characterised by spectral and analytical data. Proton-ligand formation constants of the schiff base and metal-ligand formation constants of its complexes with Sm(III), Dy(III), Gd(III), Nd(III) and Pr(III) have been determined potentiometrically in 50% (v/v) aqueous dioxane at an ionic strength of 0.1M (NaClO/sub 4/) and at 25deg C using the Irving-Rossotti titration technique. The order of stability constants (log..beta../sub 2/) is found to be Sm(III)>Dy(III)>Gd(III)>Pr(III)>Nd(III).

Prevalence of Metabolic Syndrome in Patients with HIV in the Era of Highly Active Antiretroviral Therapy.

Science.gov (United States)

Lombo, Bernardo; Alkhalil, Imran; Golden, Marjorie P; Fotjadhi, Irma; Ravi, Sreedhar; Virata, Michael; Lievano, Marta; Diez, Jose; Ghantous, Andre; Donohue, Thomas

2015-05-01

Since the introduction of combination antiretroviral therapy (cART) as the standard of care for HIV disease, there has been a precipitous decline in the death rate due to HIV/ AIDS. The purpose of this study was to report the prevalence of metabolic syndrome in HIV infected patients. Retrospective, cross-sectional, observational study of 259 patients with HIV infection treated with cART from an urban community hospital. Metabolic syndrome prevalence was defined using the International Diabetes Federation (IDF) and the U.S. National Cholesterol Education Program Adult Treatment Panel III (ATP III) criteria. Study patients were included regardless of the duration of cART. The prevalence of metabolic syndrome was 27% using IDF criteria and 26% using ATP III criteria. Logistic regression analysis found an association between treatment with the protease inhibitor darunavir and metabolic syndrome. (OR 3.32 with 95% confidence interval between 1.54 and 7.15). There is a high prevalence of metabolic syndrome and obesity in HIV patients treated with cART, especially those taking the protease inhibitor darunavir.

Reliability Study in Solar Panels

OpenAIRE

Español Lifante, Albert

2012-01-01

Crystalline silicon Modules are formed by single silicon photovoltaic cells. Since each one of these cells individually contributes to the overall electric power of the panel, the failure of one of them directly affects to its benefits and performance. To Minimize these negative effects, junction boxes with few bypass diodes are usually included in Photovoltaic Solar panels. A still experimental way to built solar panels is to integrate bypass diodes in every single cell, which would in...

Electre III method in assessment of variants of integrated urban public transport system in Cracow

Directory of Open Access Journals (Sweden)

Katarzyna SOLECKA

2014-12-01

Full Text Available There is a lot of methods which are currently used for assessment of urban public transport system development and operation e.g. economic analysis, mostly Cost-Benefit Analysis – CBA, Cost-Effectiveness Analysis - CEA, hybrid methods, measurement methods (survey e.g. among passengers and measurement of traffic volume, vehicles capacity etc., and multicriteria decision aiding methods (multicriteria analysis. The main aim of multicriteria analysis is the choice of the most desirable solution from among alternative variants according to different criteria which are difficult to compare against one another. There are several multicriteria methods for assessment of urban public transport system development and operation, e.g. AHP, ANP, Electre, Promethee, Oreste. The paper presents an application of one of the most popular variant ranking methods – Electre III method. The algorithm of Electre III method usage is presented in detail and then its application for assessment of variants of urban public transport system integration in Cracow is shown. The final ranking of eight variants of integration of urban public transport system in Cracow (from the best to the worst variant was drawn up with the application of the Electre III method. For assessment purposes 10 criteria were adopted: economical, technical, environmental, and social; they form a consistent criteria family. The problem was analyzed with taking into account different points of view: city authorities, public transport operators, city units responsible for transport management, passengers and others users. Separate models of preferences for all stakeholders were created.

Sound transmission loss of composite sandwich panels

Science.gov (United States)

Zhou, Ran

Light composite sandwich panels are increasingly used in automobiles, ships and aircraft, because of the advantages they offer of high strength-to-weight ratios. However, the acoustical properties of these light and stiff structures can be less desirable than those of equivalent metal panels. These undesirable properties can lead to high interior noise levels. A number of researchers have studied the acoustical properties of honeycomb and foam sandwich panels. Not much work, however, has been carried out on foam-filled honeycomb sandwich panels. In this dissertation, governing equations for the forced vibration of asymmetric sandwich panels are developed. An analytical expression for modal densities of symmetric sandwich panels is derived from a sixth-order governing equation. A boundary element analysis model for the sound transmission loss of symmetric sandwich panels is proposed. Measurements of the modal density, total loss factor, radiation loss factor, and sound transmission loss of foam-filled honeycomb sandwich panels with different configurations and thicknesses are presented. Comparisons between the predicted sound transmission loss values obtained from wave impedance analysis, statistical energy analysis, boundary element analysis, and experimental values are presented. The wave impedance analysis model provides accurate predictions of sound transmission loss for the thin foam-filled honeycomb sandwich panels at frequencies above their first resonance frequencies. The predictions from the statistical energy analysis model are in better agreement with the experimental transmission loss values of the sandwich panels when the measured radiation loss factor values near coincidence are used instead of the theoretical values for single-layer panels. The proposed boundary element analysis model provides more accurate predictions of sound transmission loss for the thick foam-filled honeycomb sandwich panels than either the wave impedance analysis model or the

75 FR 82376 - North American Free Trade Agreement, Article 1904 NAFTA Panel Reviews; Request for Panel Review

Science.gov (United States)

2010-12-30

... Mexico and the People's Republic of China. This determination was published in the Federal Register (75... Panel Review. SUMMARY: On December 22, 2010, the Government of Mexico filed a First Request for Panel... Government of Mexico established Rules of Procedure for Article 1904 Binational Panel Reviews (``Rules...

A Study of the Evaluation Dimensions and Criteria for OpenCourseWare Websites

Directory of Open Access Journals (Sweden)

Yi-Ju Wang

2015-04-01

Full Text Available OpenCourseWare (OCW, a set of free-of-use learning materials established by universities, became quite a success over the years and aroused the users’ willingness to learn online. However, the design of OCW websites, including the structure, organization of learning resources and interfaces is multi-variant and disordered. The system and arrangement are still lacking of an evaluation standard. The goal of this study is to establish and verify the dimensions and the criteria that are suitable for evaluation of OCW websites. To achieve the research goal, the researchers performed document analysis and the Delphi Method. Sixteen experts in a total took part in the Delphi panel. By giving three rounds of questionnaire to those experts in the self-developed e-Delphi system, the researcher gathered their opinions then analyzed them back and forth. The final edition of the Evaluation Dimensions and Criteria for OpenCourseWare Website includes seven dimensions with fifty-seven criteria. Finally, concrete suggestions for OCW website establishment and administration were provided. Implications and recommendations for future research were also addressed.

[Technical criteria of central venous catheters: Anaesthesiologist/intensivist and pharmacist opinions].

Science.gov (United States)

Novais, T; Cabelguenne, D; Jolivet, F; Nouvel, M; Wallet, F; Piriou, V

2015-11-01

The lack of technical information from suppliers and from the literature, a wide variety of features and the absence of medical device reference document explain the difficulty for medical and pharmaceutical staffs to choose a central venous catheter (CVC). The aim of this study was to establish the specifications to choose a CVC according to the clinician needs. An analysis of suppliers' technical documentation and a literature review was performed to identify criteria and to collect them in a questionnaire to conduct semi-structured interviews between 1 pharmacist and 5 anaesthesiologists/intensivists. With these interviews, the technical criteria were classified according to their importance in 3 levels. Thirteen technical criteria were identified after reading the technical documents and the literature. Among them, 8 were classified as "essential criteria" (level I) by the physicians: J-shaped guide, one clamp on each way, identified lumen, radiopacity, graduation every centimeter by 5 to 20 cm from the distal extremity, a length of 15 to 25 cm, a single-lumen catheter with a 14 to 16G way and a three-lumen catheter with 14 to 18G way. Finally, three criteria were classified as "intermediate criteria" (level II) and two as "optional criteria" (level III). This collaborative approach allowed to reference new medical devices according to the clinicians needs. These CVC are a mean to respect guidelines for physicians and nurses and to secure the patient's care. Copyright © 2015 Elsevier Masson SAS. All rights reserved.

The Rome II and Rome III criteria identify the same subtype-populations in irritable bowel syndrome

DEFF Research Database (Denmark)

Engsbro, A L; Simrén, M; Bytzer, P

2012-01-01

For comparing trials using different classifications for irritable bowel syndrome (IBS) subtypes, it is important to know whether these identify the same sub-populations. Our aim was to determine the agreement between Rome II and Rome III subtypes, and to explore whether agreement depends...

The MCMI-III: present and future directions.

Science.gov (United States)

Millon, T; Davis, R D

1997-02-01

Both the original Millon Clinical Multiaxial Inventory (MCMI-I; Millon, 1977) and the Millon Clinical Multiaxial Inventory-II (MCMI-II; Millon, 1987) were refined and strengthened on a regular basis by both theoretic logic and research data. This aspiration has continued. The new Millon Clinical Multiaxial Inventory-III (MCMI-III; Millon, 1994) has been further coordinated with the most recent official diagnostic schema, the Diagnostic and Statistical Manual of Mental Disorders (4th ed., [DSM-IV]; American Psychiatric Association [APA], 1994) in an even more explicit way than before. Although the publication of the first version of the MCMI preceded the publication of the DSM-IV, its author played a major role in formulating the official manual's personality disorders, contributing thereby to their conceptual correspondence. The DSM-III-R (APA, 1987) was subsequently published in the same year as the MCMI-II; the inventory was modified in its final stages to make it as consonant as possible with the conceptual changes introduced in the then forthcoming official classification. The present version of the MCMI, the MCMI-III, strengthens these correspondences further by drawing on many of the diagnostic criteria of the DSM-IV to serve as the basis for drafting the inventory's items. This article reports on a select set of theoretical and empirical developments that are being carefully weighed for possible inclusion in future MCMIs, or as a guide in the refinement process of future MCMIs.

Spectrophotometric and pH-Metric Studies of Ce(III, Dy(III, Gd(III,Yb(III and Pr(III Metal Complexes with Rifampicin

Directory of Open Access Journals (Sweden)

A. N. Sonar

2011-01-01

Full Text Available The metal-ligand and proton-ligand stability constant of Ce(III, Dy(III, Gd(III,Yb(III and Pr(III metals with substituted heterocyclic drug (Rifampicin were determined at various ionic strength by pH metric titration. NaClO4 was used to maintain ionic strength of solution. The results obtained were extrapolated to the zero ionic strength using an equation with one individual parameter. The thermodynamic stability constant of the complexes were also calculated. The formation of complexes has been studied by Job’s method. The results obtained were of stability constants by pH metric method is confirmed by Job’s method.

Development of Electrostatically Clean Solar Array Panels

Science.gov (United States)

Stern, Theodore G.

2000-01-01

Certain missions require Electrostatically Clean Solar Array (ECSA) panels to establish a favorable environment for the operation of sensitive scientific instruments. The objective of this program was to demonstrate the feasibility of an ECSA panel that minimizes panel surface potential below 100mV in LEO and GEO charged particle environments, prevents exposure of solar cell voltage and panel insulating surfaces to the ambient environment, and provides an equipotential, grounded structure surrounding the entire panel. An ECSA panel design was developed that uses a Front Side Aperture-Shield (FSA) that covers all inter-cell areas with a single graphite composite laminate, composite edge clips for connecting the FSA to the panel substrate, and built-in tabs that interconnect the FSA to conductive coated coverglasses using a conductive adhesive. Analysis indicated the ability of the design to meet the ECSA requirements. Qualification coupons and a 0.5m x 0.5m prototype panel were fabricated and tested for photovoltaic performance and electrical grounding before and after exposure to acoustic and thermal cycling environments. The results show the feasibility of achieving electrostatic cleanliness with a small penalty in mass, photovoltaic performance and cost, with a design is structurally robust and compatible with a wide range of current solar panel technologies.

Solar panel foundation device

Energy Technology Data Exchange (ETDEWEB)

Hawley, W.W.

1983-03-29

A transportable solar panel foundation device which has a bottom member, at least one upstanding side member, and an essentially open top. The side members are angled to permit nesting of a plurality of the foundation devices, and reinforcement pads are carried by the foundation device to support legs for one or more solar panels.

Law Panel in action.

Science.gov (United States)

Odulana, J

In September 1976 the Africa Regional Council (ARC) of IPPF created a Law Panel to 1) advise the ARC on the emphasis of laws and parenthood programs in the region, 2) investigate legal obstacles to family planning and ways of removing them, 3) institute a monitoring service on laws and court decisions affecting planned parenthood, and 4) prepare a list of lawyers and legal reformers by country. The panel has 1) recommended adoption of an IPPF Central Medical Committee and Central Law Panel statement on sterilization, adolescent fertility control, and the use of medical and auxiliary personnel in family planning services with guidelines for Africa; 2) appointed National Legal Correspondents to carry on the monitoring service mentioned above in 18 countries; and 3) discussed solutions to problems in delivering family planning services with family planning associations in Tanzania, Zambia, Mauritius, Madagascar, and Kenya. Laws governing family planning education and services, marriage, divorce, and maternity benefits in these countries are summarized. In 1978 the panel will hold 2 workshops on law and the status of women.

Complexes of lanthanum(III), cerium(III), samarium(III) and dysprosium(III) with substituted piperidines

Energy Technology Data Exchange (ETDEWEB)

Manhas, B S; Trikha, A K; Singh, H; Chander, M

1983-11-01

Complexes of the general formulae M/sub 2/Cl/sub 6/(L)/sub 3/.C/sub 2/H/sub 5/OH and M/sub 2/(NO/sub 3/)/sub 6/(L)/sub 2/.CH/sub 3/OH have been synthesised by the reactions of chlorides and nitrates of La(III), Ce(III), Sm(III) and Dy(III) with 2-methylpiperidine, 3-methylpiperidine and 4-methylpiperidine. These complexes have been characterised on the basis of their elemental analysis, and IR and electronic reflectance spectra. IR spectral data indicate the presence of coordinated ethanol and methanol molecules and bidentate nitrate groups. Coordination numbers of the metal ions vary from 5 to 8. 19 refs.

Do DSM-5 Section II personality disorders and Section III personality trait domains reflect the same genetic and environmental risk factors?

Science.gov (United States)

Reichborn-Kjennerud, T; Krueger, R F; Ystrom, E; Torvik, F A; Rosenström, T H; Aggen, S H; South, S C; Neale, M C; Knudsen, G P; Kendler, K S; Czajkowski, N O

2017-09-01

DSM-5 includes two conceptualizations of personality disorders (PDs). The classification in Section II is identical to the one found in DSM-IV, and includes 10 categorical PDs. The Alternative Model (Section III) includes criteria for dimensional measures of maladaptive personality traits organized into five domains. The degree to which the two conceptualizations reflect the same etiological factors is not known. We use data from a large population-based sample of adult twins from the Norwegian Institute of Public Health Twin Panel on interview-based DSM-IV PDs and a short self-report inventory that indexes the five domains of the DSM-5 Alternative Model plus a domain explicitly targeting compulsivity. Schizotypal, Paranoid, Antisocial, Borderline, Avoidant, and Obsessive-compulsive PDs were assessed at the same time as the maladaptive personality traits and 10 years previously. Schizoid, Histrionic, Narcissistic, and Dependent PDs were only assessed at the first interview. Biometric models were used to estimate overlap in genetic and environmental risk factors. When measured concurrently, there was 100% genetic overlap between the maladaptive trait domains and Paranoid, Schizotypal, Antisocial, Borderline, and Avoidant PDs. For OCPD, 43% of the genetic variance was shared with the domains. Genetic correlations between the individual domains and PDs ranged from +0.21 to +0.91. The pathological personality trait domains, which are part of the Alternative Model for classification of PDs in DSM-5 Section III, appears to tap, at an aggregate level, the same genetic risk factors as the DSM-5 Section II classification for most of the PDs.

PVT Panels. Fully renewable and competitive

International Nuclear Information System (INIS)

Bakker, M.; Strootman, K.J.; Jong, M.J.M.

2003-10-01

A photovoltaic/thermal (PVT) panel is a combination of photovoltaic cells with a solar thermal collector, generating solar electricity and solar heat simultaneously. PVT panels generate more solar energy per unit surface area than a combination of separate PV panels and solar thermal collectors, and share the aesthetic advantage of PV. After several years of research, PVT panels have been developed into a product that is now ready for market introduction. One of the most promising system concepts, consisting of 25 m 2 of PVT panels and a ground coupled heat pump, has been simulated in TRNSYS, and has been found to be able to fully cover both the building related electricity and heat consumption, while keeping the long-term average ground temperature constant. The cost and payback time of such a system have been determined; it has been found that the payback time of this system is approximately two-thirds of the payback time of an identical system but with 21 m 2 of PV panels and 4 m 2 of solar thermal collectors. Finally, by looking at the expected growth in the PV and solar thermal collector market, the market potential for for PVT panels has been found to be very large

EFSA CEF Panel (EFSA Panel on Food Contact Materials, Enzymes, Flavourings and Processing Aids), 2014. Scientific Opinion on Flavouring Group Evaluation 11, Revision 3 (FGE.11Rev3): Aliphatic dialcohols, diketones, and hydroxyketones from chemical groups 8 and 10

DEFF Research Database (Denmark)

Beltoft, Vibe Meister; Frandsen, Henrik Lauritz; Nørby, Karin Kristiane

The Panel on Food Contact Materials, Enzymes, Flavourings and Processing Aids of the European Food Safety Authority was requested to evaluate 11 flavouring substances in the Flavouring Group Evaluation 11, Revision 3, using the Procedure in Commission Regulation (EC) No 1565/2000. The substances......, the specifications for the materials of commerce have also been considered. Specifications including complete purity criteria and identity for the materials of commerce have been provided for all candidate substances....

How Voting and Consensus Created the Diagnostic and Statistical Manual of Mental Disorders (DSM-III).

Science.gov (United States)

Davies, James

2017-04-01

This paper examines how Task Force votes were central to the development of Diagnostic and Statistical Manual of Mental Disorders (DSM-III and DSM-III-R). Data were obtained through a literature review, investigation of DSM archival material housed at the American Psychiatric Association (APA), and interviews with key Task Force members of DSM-III and DSM-III-R. Such data indicate that Task Force votes played a central role in the making of DSM-III, from establishing diagnostic criteria and diagnostic definitions to settling questions about the inclusion or removal of diagnostic categories. The paper concludes that while the APA represented DSM-III, and the return to descriptive psychiatry it inaugurated, as a triumph of empirically based decision-making, the evidence presented here fails to support that view. Since the DSM is a cumulative project, and as DSM-III lives on through subsequent editions, this paper calls for a more socio-historically informed understanding of DSM's construction to be deployed in how the DSM is taught and implemented in training and clinical settings.

Panel cutting method: new approach to generate panels on a hull in Rankine source potential approximation

Directory of Open Access Journals (Sweden)

Hee-Jong Choi

2011-12-01

Full Text Available In the present study, a new hull panel generation algorithm, namely panel cutting method, was developed to predict flow phenomena around a ship using the Rankine source potential based panel method, where the iterative method was used to satisfy the nonlinear free surface condition and the trim and sinkage of the ship was taken into account. Numerical computations were performed to investigate the validity of the proposed hull panel generation algorithm for Series 60 (CB=0.60 hull and KRISO container ship (KCS, a container ship designed by Maritime and Ocean Engineering Research Institute (MOERI. The computational results were validated by comparing with the existing experimental data.

Panel cutting method: new approach to generate panels on a hull in Rankine source potential approximation

Science.gov (United States)

Choi, Hee-Jong; Chun, Ho-Hwan; Park, Il-Ryong; Kim, Jin

2011-12-01

In the present study, a new hull panel generation algorithm, namely panel cutting method, was developed to predict flow phenomena around a ship using the Rankine source potential based panel method, where the iterative method was used to satisfy the nonlinear free surface condition and the trim and sinkage of the ship was taken into account. Numerical computations were performed to investigate the validity of the proposed hull panel generation algorithm for Series 60 (CB=0.60) hull and KRISO container ship (KCS), a container ship designed by Maritime and Ocean Engineering Research Institute (MOERI). The computational results were validated by comparing with the existing experimental data.

Neuro-diffuse algorithm for neutronic power identification of TRIGA Mark III reactor; Algoritmo neuro-difuso para la identificacion de la potencia neutronica del reactor Triga Mark III

Energy Technology Data Exchange (ETDEWEB)

Rojas R, E.; Benitez R, J. S. [Instituto Tecnologico de Toluca, Division de Estudios de Posgrado e Investigacion, Av. Tecnologico s/n, Ex-Rancho La Virgen, 50140 Metepec, Estado de Mexico (Mexico); Segovia de los Rios, J. A.; Rivero G, T. [ININ, Gerencia de Ciencias Aplicadas, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico)], e-mail: jorge.benitez@inin.gob.mx

2009-10-15

In this work are presented the results of design and implementation of an algorithm based on diffuse logic systems and neural networks like method of neutronic power identification of TRIGA Mark III reactor. This algorithm uses the punctual kinetics equation as data generator of training, a cost function and a learning stage based on the descending gradient algorithm allow to optimize the parameters of membership functions of a diffuse system. Also, a series of criteria like part of the initial conditions of training algorithm are established. These criteria according to the carried out simulations show a quick convergence of neutronic power estimated from the first iterations. (Author)

Inner-sphere and outer-sphere complexes of yttrium(III), lanthanum (III), neodymium(III), terbium(III) and thulium(III) with halide ions in N,N-dimethylformamide

International Nuclear Information System (INIS)

Takahashi, Ryouta; Ishiguro, Shin-ichi

1991-01-01

The formation of chloro, bromo and iodo complexes of yttrium(III), and bromo and iodo complexes of lanthanum(III), neodymium(III), terbium(III) and thulium(III) has been studied by precise titration calorimetry in N,N-dimethylformamide (DMF) at 25 o C. The formation of [YCl] 2+ , [YCl 2 ] + , [YCl 3 ] and [YCl 4 ] - , and [MBr] 2+ and [MBr 2 ] + (M = Y, La, Nd, Tb, Tm) was revealed, and their formation constants, enthalpies and entropies were determined. It is found that the formation enthalpies change in the sequence ΔH o (Cl) > ΔH o (l), which is unusual for hard metal (III) ions. This implies that, unlike the chloride ion, the bromide ion forms outer-sphere complexes with the lanthanide(III) and yttrium(III) ions in DMF. Evidence for either an inner- or outer-sphere complex was obtained from 89 Y NMR spectra for Y(ClO 4 ) 3 , YCl 3 and YBr 3 DMF solutions at room temperature. (author)

Solar panel assembly and support pad

Energy Technology Data Exchange (ETDEWEB)

Hawley, W.W.

1980-10-07

A solar panel assembly is described comprising at least one solar panel, support means for carrying said panel, and at least one support pad having a base plate, upstanding longitudinal sides, and spaced apart flange means for connection to said support means, said upstanding sides and opposed flange means defining an interior volume for receiving and holding weighting material.

Comparison of CpG island methylator phenotype (CIMP) frequency in colon cancer using different probe- and gene-specific scoring alternatives on recommended multi-gene panels.

Science.gov (United States)

Berg, Marianne; Hagland, Hanne R; Søreide, Kjetil

2014-01-01

In colorectal cancer a distinct subgroup of tumours demonstrate the CpG island methylator phenotype (CIMP). However, a consensus of how to score CIMP is not reached, and variation in definition may influence the reported CIMP prevalence in tumours. Thus, we sought to compare currently suggested definitions and cut-offs for methylation markers and how they influence CIMP classification in colon cancer. Methylation-specific multiplex ligation-dependent probe amplification (MS-MLPA), with subsequent fragment analysis, was used to investigate methylation of tumour samples. In total, 31 CpG sites, located in 8 different genes (RUNX3, MLH1, NEUROG1, CDKN2A, IGF2, CRABP1, SOCS1 and CACNA1G) were investigated in 64 distinct colon cancers and 2 colon cancer cell lines. The Ogino gene panel includes all 8 genes, in addition to the Weisenberger panel of which only 5 of the 8 genes included were investigated. In total, 18 alternative combinations of scoring of CIMP positivity on probe-, gene-, and panel-level were analysed and compared. For 47 samples (71%), the CIMP status was constant and independent of criteria used for scoring; 34 samples were constantly scored as CIMP negative, and 13 (20%) consistently scored as CIMP positive. Only four of 31 probes (13%) investigated showed no difference in the numbers of positive samples using the different cut-offs. Within the panels a trend was observed that increasing the gene-level stringency resulted in a larger difference in CIMP positive samples than increasing the probe-level stringency. A significant difference between positive samples using 'the most stringent' as compared to 'the least stringent' criteria (20% vs 46%, respectively; pCIMP depending on the cut-offs and genes included in a panel was found, with twice as many positives samples by least compared to most stringent definition used.

JERAMI SEBAGAI BAHAN BAKU PANEL AKUSTIK PELAPIS DINDING

Directory of Open Access Journals (Sweden)

Christina E. Mediastika

2008-01-01

Full Text Available The demand of walling panels with acoustic qualification has surprisingly increased, due to the needs for home theaters and mini recording studios in the increase of environmental noise. Therefore, good supply of acoustic panels, especially those with lower price are necessary. A series of study to explore possibility in using paddy-straw as main material to construct cheap and high quality panels has been developed. Prior to this study, an earlier small research showed there was a great potency in using paddy-straw as panels, especially ones drawn from paddy in type IR. The earlier study recommends further research to examine strength of compression and tensile of the constructed panels to go for building materials, which is presented in this paper. Acoustic qualification of the panels is subject for further reserach. Abstract in Bahasa Indonesia: Kebutuhan akan panel pelapis dinding yang bersifat akustik terus meningkat seiring meningkatnya kebisingan dan kebutuhan terhadap ruang studio pribadi. Ketersediaan panel pelapis dinding dengan harga yang lebih terjangkau seperti yang terbuat dari bahan limbah sangatlah dibutuhkan. Pada penelitian awal telah diselidiki kemungkinan penggunaan jerami yang merupakan limbah sebagai bahan baku pembuatan panel akustik. Penelitian tersebut menunjukkan bahwa jerami sangat potensial digunakan sebagai bahan aku panel, terutama jerami padi berjenis IR. Selanjutnya panel jerami ini perlu mendapatkan perlakukan uji desak dan lentur untuk memastikan kemampuannya menahan berat sendiri dan kekuatannya saat proses penggunaan, sebelum akhirnya mengalami pengujian berkaitan dengan kualitas akustik. Kekuatan desak dan lentur panel dimaksud, tersaji dalam tulisan ini. Kata kunci: panel jerami, uji desak, uji lentur.

Report of Industry Panel Group

Science.gov (United States)

Gallimore, Simon; Gier, Jochen; Heitland, Greg; Povinelli, Louis; Sharma, Om; VandeWall, Allen

2006-01-01

A final report is presented from the industry panel group. The contents include: 1) General comments; 2) Positive progress since Minnowbrook IV; 3) Industry panel outcome; 4) Prioritized turbine projects; 5) Prioritized compressor projects; and 6) Miscellaneous.

KUALITAS AKUSTIK PANEL DINDING BERBAHAN BAKU JERAMI

Directory of Open Access Journals (Sweden)

Christina E. Mediastika

2008-01-01

Full Text Available A series of study to explore possibility in using paddy-straw as main material to construct cheap and high quality panels has been developed. Prior to this study, laboratory research to examine strength of compression and tensile of the panels have been conducted, which is showed a significant value for a non-structural panel. The compression is 15 N/mm2 and tensile averaged at 0,5 N/mm2 . In this study, acoustic properties of the panels is to be examined, i.e.: transmission loss (TL, absorption coefficient (, and reverberation time (RT60. The test showed TL of 10 dB and 16 dB,  of 0,4 and 0,8 and improve RT60 from 0,88 sec to 0,35 sec and 0,16 sec (500 Hz is used for reference. Abstract in Bahasa Indonesia: Ketersediaan panel pelapis dinding yang bersifat akustik dengan harga yang lebih terjangkau seperti yang terbuat dari bahan limbah sangatlah penting. Pada penelitian awal telah diselidiki penggunaan jerami sebagai bahan baku pembuatan panel akustik, sekaligus telah dilakukan pengujian terhadap kareakteristik struktural (uji desak dan lentur dari panel tersebut. Dari uji kekuatan struktural, panel memiliki kekuatan desak mencapai 15 N/mm2 dan kuat lentur reta-rata 0,5 N/mm2. Kekuatan ini dianggap mencukupi bagi panel non-struktural yang hanya bertugas untuk memikul beban sendiri. Oleh karena tujuan awal pembuatan panel adalah untuk kepentingan akustik, maka pada penelitian lanjutan, dilakukan uji laboratorium dan lapangan untuk melihat karakterisktik akustiknya. Adapun pengujian meliputi: redaman/insulasi (TL, koefisien serap ( dan waktu dengung (RT60. Dari hasil pengujian, panel mempunyai TL 10 dB dan 16 dB,  0,4 dan 0,8, serta mampu memperbaiki RT60 ruangan dari 0,88 detik menjadi 0,35 detik dan 0,16 detik. Kesemua pengujian menggunakan band frekuensi 500 Hz sebagai acuan. Kata kunci: panel jerami, insulasi, koefisien serap, waktu dengung.

Aerospace Safety Advisory Panel

Science.gov (United States)

1999-01-01

This report covers the activities of the Aerospace Safety Advisory Panel (ASAP) for calendar year 1998-a year of sharp contrasts and significant successes at NASA. The year opened with the announcement of large workforce cutbacks. The slip in the schedule for launching the International Space Station (ISS) created a five-month hiatus in Space Shuttle launches. This slack period ended with the successful and highly publicized launch of the STS-95 mission. As the year closed, ISS assembly began with the successful orbiting and joining of the Functional Cargo Block (FGB), Zarya, from Russia and the Unity Node from the United States. Throughout the year, the Panel maintained its scrutiny of NASA's safety processes. Of particular interest were the potential effects on safety of workforce reductions and the continued transition of functions to the Space Flight Operations Contractor. Attention was also given to the risk management plans of the Aero-Space Technology programs, including the X-33, X-34, and X-38. Overall, the Panel concluded that safety is well served for the present. The picture is not as clear for the future. Cutbacks have limited the depth of talent available. In many cases, technical specialties are 'one deep.' The extended hiring freeze has resulted in an older workforce that will inevitably suffer significant departures from retirements in the near future. The resulting 'brain drain' could represent a future safety risk unless appropriate succession planning is started expeditiously. This and other topics are covered in the section addressing workforce. The major NASA programs are also limited in their ability to plan property for the future. This is of particular concern for the Space Shuttle and ISS because these programs are scheduled to operate well into the next century. In the case of the Space Shuttle, beneficial and mandatory safety and operational upgrades are being delayed because of a lack of sufficient present funding. Likewise, the ISS has

Study of association of Eu(III) β-diketonato-1,10-phenanthroline complexes in silica-based hybrid materials

Energy Technology Data Exchange (ETDEWEB)

Fadieiev, Yevhen M.; Smola, Sergii S. [A.V. Bogatsky Physico-chemical Institute, National Academy of Sciences of Ukraine, 86, Lustdorfskaya doroga, 65080 Odessa (Ukraine); Malinka, Elena V. [Odessa National Academy of Food Technology, 112, Kanatna Street, 65039 Odessa (Ukraine); Rusakova, Nataliia V., E-mail: lanthachem@ukr.net [A.V. Bogatsky Physico-chemical Institute, National Academy of Sciences of Ukraine, 86, Lustdorfskaya doroga, 65080 Odessa (Ukraine)

2017-03-15

Hybrid organic-inorganic materials based on silica and mixed-ligand complexes of Eu(III) with β-diketones and 1,10-phenanthroline with covalent and non-covalent attachment to matrix were obtained by a sol-gel route. Luminescent study of obtained systems allowed to propose spectral criteria for estimation of the uniformity of complex distribution in amorphous silica matrix. Thus, such criteria are the broadening of Eu(III) 4f-luminescence bands, emission decay and the shape of plot of the emission intensity vs. concentration of complex in the materials. Full width of {sup 5}D{sub 0}→{sup 7}F{sub 2} band at its half maximum and the ratio of the {sup 5}D{sub 0}→{sup 7}F{sub 2} and {sup 5}D{sub 0}→{sup 7}F{sub 1} bands intensities were used as quantitative measures of spectral changes and the bands broadening in Eu(III) emission spectra. - Highlights: • Modification of Eu(III) β-diketonates by an anchor fragments was carried out. • The degree of association of molecules was estimated based on emission spectra. • Covalent anchoring of complexes promotes their uniform distribution in matrix. • Non-covalently grafted complexes are prone to association in amorphous silica.

EFSA CEF Panel (EFSA Panel on Food Contact Materials, Enzymes, Flavourings and Processing Aids), 2015. Scientific Opinion on Flavouring Group Evaluation 25, Revision 3 (FGE.25Rev3): Aliphatic hydrocarbons from chemical group 31

DEFF Research Database (Denmark)

Nørby, Karin Kristiane; Beltoft, Vibe Meister

The Panel on Food Contact Materials, Enzymes, Flavourings and Processing Aids of the European Food Safety Authority was requested to evaluate 14 flavouring substances in the Flavouring Group Evaluation 25, Revision 3, using the Procedure in Commission Regulation (EC) No 1565/2000. None...... on the basis of the MSDI approach. Besides the safety assessment of these flavouring substances, the specifications for the materials of commerce have also been considered. Adequate specifications including complete purity and identity criteria for the materials of commerce have been provided for all 14...

Early Site Permit Demonstration Program: Regulatory criteria evaluation report

Energy Technology Data Exchange (ETDEWEB)

1993-03-01

The primary objective of the ESPDP is to demonstrate successfully the use of 10CFR52 to obtain ESPs for one or more US sites for one (or more) ALWR nuclear power plants. It is anticipated that preparation of the ESP application and interaction with NRC during the application review process will result not only in an ESP for the applicant(s) but also in the development of criteria and definition of processes, setting the precedent that facilitates ESPs for subsequent ESP applications. Because siting regulatory processes and acceptance criteria are contained in over 100 separate documents, comprehensive licensing and technical reviews were performed to establish whether the requirements and documentation are self-consistent, whether the acceptance criteria are sufficiently well-defined and clear, and whether the licensing process leading to the issuance of an ESP is unambiguously specified. The results of the technical and licensing evaluations are presented in this report. The purpose, background, and organization of the ESPDP is delineated in Section 1. Section 11 contains flowcharts defining siting application requirements, environmental report requirements, and emergency planning/preparedness requirements for ALWRS. The licensing and technical review results are presented in Section III.

Early Site Permit Demonstration Program: Regulatory criteria evaluation report

International Nuclear Information System (INIS)

1993-03-01

The primary objective of the ESPDP is to demonstrate successfully the use of 10CFR52 to obtain ESPs for one or more US sites for one (or more) ALWR nuclear power plants. It is anticipated that preparation of the ESP application and interaction with NRC during the application review process will result not only in an ESP for the applicant(s) but also in the development of criteria and definition of processes, setting the precedent that facilitates ESPs for subsequent ESP applications. Because siting regulatory processes and acceptance criteria are contained in over 100 separate documents, comprehensive licensing and technical reviews were performed to establish whether the requirements and documentation are self-consistent, whether the acceptance criteria are sufficiently well-defined and clear, and whether the licensing process leading to the issuance of an ESP is unambiguously specified. The results of the technical and licensing evaluations are presented in this report. The purpose, background, and organization of the ESPDP is delineated in Section 1. Section 11 contains flowcharts defining siting application requirements, environmental report requirements, and emergency planning/preparedness requirements for ALWRS. The licensing and technical review results are presented in Section III

Mark III LOCA-related hydrodynamic load definition. Generic technical activity B-10

International Nuclear Information System (INIS)

1984-02-01

This report, prepared by the staff of the Office of Nuclear Reactor Regulation and its consultants at the Brookhaven National Laboratory, provides a discussion of LOCA-related suppression pool hydrodynamic loads in boiling water reactor (BWR) facilities with the Mark III pressure-suppression containment design. Its issuance completes NRC Generic Technical Activity B-10, Behavior of BWR Mark III Containment. On the basis of certain large-scale tests conducted between 1973 and 1979, the General Electric Company developed LOCA-related hydrodynamic load definitions for use in the design of the standard Mark III containment. The staff and its consultants have reviewed these load definitions and their bases conclude that, with a few specified changes, the proposed load definitions provide conservative loading conditions. The staff-approved acceptance criteria for LOCA-related hydrodynamic loads are provided in Appendix C of this report

Panel Smooth Transition Regression Models

DEFF Research Database (Denmark)

González, Andrés; Terasvirta, Timo; Dijk, Dick van

We introduce the panel smooth transition regression model. This new model is intended for characterizing heterogeneous panels, allowing the regression coefficients to vary both across individuals and over time. Specifically, heterogeneity is allowed for by assuming that these coefficients are bou...

A search for new MRI criteria for dissemination in space in subjects with a clinically isolated syndrome

DEFF Research Database (Denmark)

Korteweg, T; Tintore, M; Uitdehaag, B M J

2009-01-01

The International Panel on the Diagnosis of Multiple Sclerosis (MS) incorporated the Barkhof/Tintoré (B/T) magnetic resonance criteria into their diagnostic scheme to provide evidence of dissemination in space of central nervous system lesions, a prerequisite for diagnosing MS in patients who...... on information from a single scan. Apparently, findings from contrast-enhanced and follow-up magnetic resonance scans are needed to improve the diagnostic algorithm....

Inverse correlation between coffee consumption and prevalence of metabolic syndrome: baseline survey of the Japan Multi-Institutional Collaborative Cohort (J-MICC) Study in Tokushima, Japan.

Science.gov (United States)

Takami, Hidenobu; Nakamoto, Mariko; Uemura, Hirokazu; Katsuura, Sakurako; Yamaguchi, Miwa; Hiyoshi, Mineyoshi; Sawachika, Fusakazu; Juta, Tomoya; Arisawa, Kokichi

2013-01-01

It is unclear whether consumption of coffee and green tea is associated with metabolic syndrome. This cross-sectional study enrolled 554 adults who had participated in the baseline survey of the Japan Multi-Institutional Collaborative Cohort (J-MICC) Study in Tokushima Prefecture, Japan. Consumption of coffee and green tea was assessed using a questionnaire. Metabolic syndrome was diagnosed using the criteria of the National Cholesterol Education Program Adult Treatment Panel III (NCEP ATP III) and the Japan Society for the Study of Obesity (JASSO). Logistic regression analysis was used to examine the association between consumption of coffee and green tea and prevalence of metabolic syndrome and its components. After adjustment for sex, age, and other potential confounders, greater coffee consumption was associated with a significantly lower prevalence of metabolic syndrome, as defined by NCEP ATP III criteria (P for trend = 0.03). Participants who drank more coffee had a lower odds ratio (OR) for high serum triglycerides (P for trend = 0.02), but not for increased waist circumference or high blood pressure. Using JASSO criteria, moderate coffee consumption (1.5 to inversely correlated with metabolic syndrome diagnosed using NCEP ATP III criteria, mainly because it was associated with lower serum triglyceride levels. This association highlights the need for further prospective studies of the causality of these relationships.

Prevalencia del síndrome metabólico entre los pacientes que asisten al servicio clínica de hipertensión de la Fundación Santa Fe de Bogotá Metabolic syndrome prevalence in patients attending the hypertension clinic at the Fundación Santa Fe de Bogotá

Directory of Open Access Journals (Sweden)

Bernardo Lombo

Full Text Available Antecedentes: en los últimos cinco años han surgido diferentes definiciones para síndrome metabólico, lo cual ha llevado a confusiones. En octubre de 2005, la American Heart Association (AHA propuso algunas recomendaciones y modificaciones para optimizar el uso de los criterios del National Cholesterol Education Program´s Adult Treatment Panel III Report (ATP III. Objetivo: determinar la prevalencia del síndrome metabólico como lo define el ATP III comparado con la definición de la AHA 2005, en los pacientes de la Clínica de Hipertensión de la Fundación Santa Fe de Bogotá. Materiales y métodos: estudio retrospectivo de corte transversal. Se revisaron 550 historias clínicas entre enero de 2004 y septiembre de 2005. Se describió la población a estudio y se estimó la prevalencia de síndrome metabólico según los criterios del ATP III y de la AHA. Resultados: de acuerdo con los criterios del ATP III, la prevalencia del síndrome fue del 27,3% (hombres 19,29%, mujeres 30,05%, mientras que según los criterios de la AHA fue del 75,9% (hombres 77,9% y mujeres 75,25%. Conclusiones: la población a estudio presenta una alta prevalencia de síndrome metabólico de acuerdo con los criterios del ATP III y de la AHA. Los criterios de la AHA identifican una proporción mayor de pacientes con esta patología, y es de mayor utilidad para diagnosticar personas en riesgo e implementar estrategias terapéuticas, cambios de estilo de vida y modificación de factores de riesgo de forma más temprana.Previous history: different definitions for metabolic syndrome have been done during the last five years, generating confusion. In October 2005 the American Heart Association (AHA proposed some recommendations and modifications in order to optimize the use of the National Cholesterol Education Program's Adult Treatment Panel III Report (ATP III criteria. Objective: determine the prevalence of metabolic syndrome as defined by ATP III in comparison with

Hexagon solar power panel

Science.gov (United States)

Rubin, I. (Inventor)

1978-01-01

A solar energy panel support is described upon which silicon cells are arrayed. The cells are wafer thin and of two geometrical types, both of the same area and electrical rating, namely hexagon cells and hourglass cells. The hourglass cells are composites of half hexagons. A near perfect nesting relationship of the cells achieves a high density packing whereby optimum energy production per panel area is achieved.

A multi-criteria decision making approach for supplier selection in the flexible packaging industry

Directory of Open Access Journals (Sweden)

Cristea Ciprian

2017-01-01

Full Text Available The supplier selection problem represents one of the most important components of the supply chain management. This article presents a multiple criteria decision making analysis contributing to the selection of the most convenient supplier in the flexible packaging industry. Due to the fact that in today's supply chain management, the performance of potential suppliers is evaluated against multiple criteria rather than taking into account only the cost factor, the appropriate criteria in the supplier selection have been identified, and the considered variants are assessed, considering the decision maker’s preferences and existing constraints. The variants are ranked in terms of their suitability for selecting a supplier with the use of Electre III method. The results obtained from the simulation experiment suggest that this methodology is a feasible decision support model.

Control panel for CMC 8080 crate controller

International Nuclear Information System (INIS)

Masayuki Inokuchi

1978-01-01

The main features of Control Panel for CAMAC Crate Controller CMC 8080 are described. The control panel can be directly connected with CRATE CONTROLLER's front panel connector with a 50 lines cable without any changes in CMC 8080 system circuits. (author)

Recycling acetic acid from polarizing film of waste liquid crystal display panels by sub/supercritical water treatments.

Science.gov (United States)

Wang, Ruixue; Chen, Ya; Xu, Zhenming

2015-05-19

Waste liquid crystal display (LCD) panels mainly contain inorganic materials (glass substrate) and organic materials (polarizing film and liquid crystal). The organic materials should be removed first since containing polarizing film and liquid crystal is to the disadvantage of the indium recycling process. In the present study, an efficient and environmentally friendly process to obtain acetic acid from waste LCD panels by sub/supercritical water treatments is investigated. Furthermore, a well-founded reaction mechanism is proposed. Several highlights of this study are summarized as follows: (i) 99.77% of organic matters are removed, which means the present technology is quite efficient to recycle the organic matters; (ii) a yield of 78.23% acetic acid, a quite important fossil energy based chemical product is obtained, which can reduce the consumption of fossil energy for producing acetic acid; (iii) supercritical water acts as an ideal solvent, a requisite reactant as well as an efficient acid-base catalyst, and this is quite significant in accordance with the "Principles of Green Chemistry". In a word, the organic matters of waste LCD panels are recycled without environmental pollution. Meanwhile, this study provides new opportunities for alternating fossil-based chemical products for sustainable development, converting "waste" into "fossil-based chemicals".

PV panel model based on datasheet values

DEFF Research Database (Denmark)

Sera, Dezso; Teodorescu, Remus; Rodriguez, Pedro

2007-01-01

This work presents the construction of a model for a PV panel using the single-diode five-parameters model, based exclusively on data-sheet parameters. The model takes into account the series and parallel (shunt) resistance of the panel. The equivalent circuit and the basic equations of the PV cell....... Based on these equations, a PV panel model, which is able to predict the panel behavior in different temperature and irradiance conditions, is built and tested....

Thin film photovoltaic panel and method

Science.gov (United States)

Ackerman, Bruce; Albright, Scot P.; Jordan, John F.

1991-06-11

A thin film photovoltaic panel includes a backcap for protecting the active components of the photovoltaic cells from adverse environmental elements. A spacing between the backcap and a top electrode layer is preferably filled with a desiccant to further reduce water vapor contamination of the environment surrounding the photovoltaic cells. The contamination of the spacing between the backcap and the cells may be further reduced by passing a selected gas through the spacing subsequent to sealing the backcap to the base of the photovoltaic panels, and once purged this spacing may be filled with an inert gas. The techniques of the present invention are preferably applied to thin film photovoltaic panels each formed from a plurality of photovoltaic cells arranged on a vitreous substrate. The stability of photovoltaic conversion efficiency remains relatively high during the life of the photovoltaic panel, and the cost of manufacturing highly efficient panels with such improved stability is significantly reduced.

Solvent extraction of anionic chelate complexes of lanthanum(III), europium(III), lutetium(III), scandium(III), and indium(III) with 2-thenoyltrifluoroacetone as ion-pairs with tetrabutylammonium ions

International Nuclear Information System (INIS)

Noro, Junji; Sekine, Tatsuya.

1992-01-01

The solvent extraction of lanthanum(III), europium(III), lutetium(III), scandium(III), and indium(III) in 0.1 mol dm -3 sodium nitrate solutions with 2-thenoyltrifluoroacetone (Htta) in the absence and presence of tetrabutylammonium ions (tba + ) into carbon tetrachloride was measured. The extraction of lanthanum(III), europium(III), and lutetium(III) was greatly enhanced by the addition of tba + ; this could be explained in terms of the extraction of a ternary complex, M(tta) 4 - tba + . However, the extractions of scandium(III) and indium(III) were nearly the same when tba + was added. The data were treated on the basis of the formation equilibrium of the ternary complex from the neutral chelate, M(tta) 3 , with the extracted ion-pairs of the reagents, tta - tba + , in the organic phase. It was concluded that the degree of association of M(tta) 3 with the ion-pair, tta - tba + , is greater in the order La(tta) 3 ≅ Eu(tta) 3 > Lu(tta) 3 , or that the stability of the ternary complex in the organic phase is higher in the order La(tta) 4 - tba + ≅ Eu(tta) 4 - tba + > Lu(tta) 4 - tba + . This is similar to those of adduct metal chelates of Htta with tributylphosphate (TBP) in synergistic extraction systems. (author)

Aerosol Deposition and Solar Panel Performance

Science.gov (United States)

Arnott, W. P.; Rollings, A.; Taylor, S. J.; Parks, J.; Barnard, J.; Holmes, H.

2015-12-01

Passive and active solar collector farms are often located in relatively dry desert regions where cloudiness impacts are minimized. These farms may be susceptible to reduced performance due to routine or episodic aerosol deposition on collector surfaces. Intense episodes of wind blown dust deposition may negatively impact farm performance, and trigger need to clean collector surfaces. Aerosol deposition rate depends on size, morphology, and local meteorological conditions. We have developed a system for solar panel performance testing under real world conditions. Two identical 0.74 square meter solar panels are deployed, with one kept clean while the other receives various doses of aerosol deposition or other treatments. A variable load is used with automation to record solar panel maximum output power every 10 minutes. A collocated sonic anemometer measures wind at 10 Hz, allowing for both steady and turbulent characterization to establish a link between wind patterns and particle distribution on the cells. Multispectral photoacoustic instruments measure aerosol light scattering and absorption. An MFRSR quantifies incoming solar radiation. Solar panel albedo is measured along with the transmission spectra of particles collected on the panel surface. Key questions are: At what concentration does aerosol deposition become a problem for solar panel performance? What are the meteorological conditions that most strongly favor aerosol deposition, and are these predictable from current models? Is it feasible to use the outflow from an unmanned aerial vehicle hovering over solar panels to adequately clean their surface? Does aerosol deposition from episodes of nearby forest fires impact performance? The outlook of this research is to build a model that describes environmental effects on solar panel performance. Measurements from summer and fall 2015 will be presented along with insights gleaned from them.

Reliability based code calibration of fatigue design criteria of nuclear Class-1 piping

International Nuclear Information System (INIS)

Mishra, J.; Balasubramaniyan, V.; Chellapandi, P.

2016-01-01

Fatigue design of Class-l piping of NPP is carried out using Section-III of American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel code. The fatigue design criteria of ASME are based on the concept of safety factor, which does not provide means for the management of uncertainties for consistently reliable and economical designs. In this regards, a work is taken up to estimate the implicit reliability level associated with fatigue design criteria of Class-l piping specified by ASME Section III, NB-3650. As ASME fatigue curve is not in the form of analytical expression, the reliability level of pipeline fittings and joints is evaluated using the mean fatigue curve developed by Argonne National Laboratory (ANL). The methodology employed for reliability evaluation is FORM, HORSM and MCS. The limit state function for fatigue damage is found to be sensitive to eight parameters, which are systematically modelled as stochastic variables during reliability estimation. In conclusion a number of important aspects related to reliability of various piping product and joints are discussed. A computational example illustrates the developed procedure for a typical pipeline. (author)

Numerical simulation of wind loads on solar panels

Science.gov (United States)

Su, Kao-Chun; Chung, Kung-Ming; Hsu, Shu-Tsung

2018-05-01

Solar panels mounted on the roof of a building or ground are often vulnerable to strong wind loads. This study aims to investigate wind loads on solar panels using computational fluid dynamic (CFD). The results show good agreement with wind tunnel data, e.g. the streamwise distribution of mean surface pressure coefficient of a solar panel. Wind uplift for solar panels with four aspect ratios is evaluated. The effect of inclined angle and clearance (or height) of a solar panel is addressed. It is found that wind uplift of a solar panel increases when there is an increase in inclined angle and the clearance above ground shows an opposite effect.

Neuro-diffuse algorithm for neutronic power identification of TRIGA Mark III reactor

International Nuclear Information System (INIS)

Rojas R, E.; Benitez R, J. S.; Segovia de los Rios, J. A.; Rivero G, T.

2009-10-01

In this work are presented the results of design and implementation of an algorithm based on diffuse logic systems and neural networks like method of neutronic power identification of TRIGA Mark III reactor. This algorithm uses the punctual kinetics equation as data generator of training, a cost function and a learning stage based on the descending gradient algorithm allow to optimize the parameters of membership functions of a diffuse system. Also, a series of criteria like part of the initial conditions of training algorithm are established. These criteria according to the carried out simulations show a quick convergence of neutronic power estimated from the first iterations. (Author)

Integrally rigidized acoustic interior spacecraft panel

Science.gov (United States)

1976-01-01

A sandwich panel concept is described which utilizes a monolithic I-beam design as the core. The core and skins are integrally bonded with thermosetting resin into a homogeneous structure. In addition to possessing a high strength to weight ratio, the panel resists combustion, delamination, aging due to fatigue, localized stresses, and exhibits good acoustic properties. Since the panel concept has definite potential as a high flame retardant and low smoke emission panel with excellent structural integrity, aerospace materials were used to optimize the construction for highly demanding space shuttle applications. The specific materials of construction were chosen for low flammability and off-gassing properties as well as for strength, light weight, and sound dampening.

Matlab Software for Spatial Panels

NARCIS (Netherlands)

Elhorst, J.Paul

2014-01-01

Elhorst provides Matlab routines to estimate spatial panel data models at his website. This article extends these routines to include the bias correction procedure proposed by Lee and Yu if the spatial panel data model contains spatial and/or time-period fixed effects, the direct and indirect

Panel 3 - characterization

Energy Technology Data Exchange (ETDEWEB)

Erck, R.A.; Erdemir, A.; Janghsing Hsieh; Lee, R.H.; Xian Zheng Pan; Deming Shu [Argonne National Lab., IL (United States); Feldman, A. [National Inst. of Standards and Technology, Gaithersburg, MD (United States); Glass, J.T. [North Carolina State Univ., Raleigh (United States); Kleimer, R. [Coors Ceramics Co., Golden, CO (United States); Lawton, E.A. [JPL/Caltech, Pasadena, CA (United States); McHargue, C.J. [Univ. of Tennessee, Knoxville (United States)

1993-01-01

The task of this panel was to identify and prioritize needs in the area of characterization of diamond and diamond-like-carbon (DLC) films for use in the transportation industry. Until recent advances in production of inexpensive films of diamonds and DLC, it was not feasible that these materials could be mass produced. The Characterization Panel is restricting itself to identifying needs in areas that would be most useful to manufacturers and users in producing and utilizing diamond and DLC coatings in industry. These characterization needs include in-situ monitoring during growth, relation of structure to performance, and standards and definitions.

Development of panel loudspeaker system: design, evaluation and enhancement.

Science.gov (United States)

Bai, M R; Huang, T

2001-06-01

Panel speakers are investigated in terms of structural vibration and acoustic radiation. A panel speaker primarily consists of a panel and an inertia exciter. Contrary to conventional speakers, flexural resonance is encouraged such that the panel vibrates as randomly as possible. Simulation tools are developed to facilitate system integration of panel speakers. In particular, electro-mechanical analogy, finite element analysis, and fast Fourier transform are employed to predict panel vibration and the acoustic radiation. Design procedures are also summarized. In order to compare the panel speakers with the conventional speakers, experimental investigations were undertaken to evaluate frequency response, directional response, sensitivity, efficiency, and harmonic distortion of both speakers. The results revealed that the panel speakers suffered from a problem of sensitivity and efficiency. To alleviate the problem, a woofer using electronic compensation based on H2 model matching principle is utilized to supplement the bass response. As indicated in the result, significant improvement over the panel speaker alone was achieved by using the combined panel-woofer system.

Prospects of III-nitride optoelectronics grown on Si

International Nuclear Information System (INIS)

Zhu, D; Wallis, D J; Humphreys, C J

2013-01-01

The use of III-nitride-based light-emitting diodes (LEDs) is now widespread in applications such as indicator lamps, display panels, backlighting for liquid-crystal display TVs and computer screens, traffic lights, etc. To meet the huge market demand and lower the manufacturing cost, the LED industry is moving fast from 2 inch to 4 inch and recently to 6 inch wafer sizes. Although Al 2 O 3 (sapphire) and SiC remain the dominant substrate materials for the epitaxy of nitride LEDs, the use of large Si substrates attracts great interest because Si wafers are readily available in large diameters at low cost. In addition, such wafers are compatible with existing processing lines for 6 inch and larger wafers commonly used in the electronics industry. During the last decade, much exciting progress has been achieved in improving the performance of GaN-on-Si devices. In this contribution, the status and prospects of III-nitride optoelectronics grown on Si substrates are reviewed. The issues involved in the growth of GaN-based LED structures on Si and possible solutions are outlined, together with a brief introduction to some novel in situ and ex situ monitoring/characterization tools, which are especially useful for the growth of GaN-on-Si structures. (review article)

Interpretation of the [ClIII] Lines in Gaseous Nebulae.

Science.gov (United States)

Aller, L H; Czyzak, S J; Walker, M F; Krueger, T K

1970-05-01

The intensity ratio of the green lambdalambda5517 and 5537 lines of [ClIII] serves as an indicatrix of the electron density in many gaseous nebulae whose spectra can be observed with an image converter. Quantitative interpretation of the line ratio requires accurate values of the collisional strengths and transition probabilities. With improved values of these parameters we have revised electron densities for a number of nebulae; the results seem to be in good accord with those derived from other criteria.

Solar Panel Installations on Existing Structures

OpenAIRE

Tim D. Sass; Pe; Leed

2013-01-01

The rising price of fossil fuels, government incentives and growing public aware-ness for the need to implement sustainable energy supplies has resulted in a large in-crease in solar panel installations across the country. For many sites the most eco-nomical solar panel installation uses existing, southerly facing rooftops. Adding solar panels to an existing roof typically means increased loads that must be borne by the building-s structural elements. The structural desig...

Grey zones in the diagnosis of adult migraine without aura based on the International Classification of Headache Disorders-III beta: exploring the covariates of possible migraine without aura.

Science.gov (United States)

Ozge, Aynur; Aydinlar, Elif; Tasdelen, Bahar

2015-01-01

Exploring clinical characteristics and migraine covariates may be useful in the diagnosis of migraine without aura. To evaluate the diagnostic value of the International Classification of Headache Disorders (ICHD)-III beta-based diagnosis of migraine without aura; to explore the covariates of possible migraine without aura using an analysis of grey zones in this area; and, finally, to make suggestions for the final version of the ICHD-III. A total of 1365 patients (mean [± SD] age 38.5±10.4 years, 82.8% female) diagnosed with migraine without aura according to the criteria of the ICHD-III beta were included in the present tertiary care-based retrospective study. Patients meeting all of the criteria of the ICHD-III beta were classified as having full migraine without aura, while those who did not meet one, two or ≥3 of the diagnostic criteria were classified as zones I, II and III, respectively. The diagnostic value of the clinical characteristics and covariates of migraine were determined. Full migraine without aura was evident in 25.7% of the migraineurs. A higher likelihood of zone I classification was shown for an attack lasting 4 h to 72 h (OR 1.560; P=0.002), with pulsating quality (OR 4.096; P<0.001), concomitant nausea⁄vomiting (OR 2.300; P<0.001) and photophobia⁄phonophobia (OR 4.865; P<0.001). The first-rank determinants for full migraine without aura were sleep irregularities (OR 1.596; P=0.005) and periodic vomiting (OR 1.464; P=0.026). However, even if not mentioned in ICHD-III beta, the authors determined that motion sickness, abdominal pain or infantile colic attacks in childhood, associated dizziness and osmophobia have important diagnostic value. In cases that do not fulfill all of the diagnostic criteria although they are largely consistent with the characteristics of migraine in clinical terms, the authors believe that a history of infantile colic; periodic vomiting (but not periodic vomiting syndrome); recurrent abdominal pain; the

Sparkle/PM3 for the modeling of europium(III), gadolinium(III), and terbium(III) complexes

International Nuclear Information System (INIS)

Freire, Ricardo O.; Rocha, Gerd B.; Simas, Alfredo M.

2009-01-01

The Sparkle/PM3 model is extended to europium(III), gadolinium(III), and terbium(III) complexes. The validation procedure was carried out using only high quality crystallographic structures, for a total of ninety-six Eu(III) complexes, seventy Gd(III) complexes, and forty-two Tb(III) complexes. The Sparkle/PM3 unsigned mean error, for all interatomic distances between the trivalent lanthanide ion and the ligand atoms of the first sphere of coordination, is: 0.080 A for Eu(III); 0.063 A for Gd(III); and 0.070 A for Tb(III). These figures are similar to the Sparkle/AM1 ones of 0.082 A, 0.061 A, and 0.068 A respectively, indicating they are all comparable parameterizations. Moreover, their accuracy is similar to what can be obtained by present-day ab initio effective core potential full geometry optimization calculations on such lanthanide complexes. Finally, we report a preliminary attempt to show that Sparkle/PM3 geometry predictions are reliable. For one of the Eu(III) complexes, BAFZEO, we created hundreds of different input geometries by randomly varying the distances and angles of the ligands to the central Eu(III) ion, which were all subsequently fully optimized. A significant trend was unveiled, indicating that more accurate local minima geometries cluster at lower total energies, thus reinforcing the validity of sparkle model calculations. (author)

78 FR 63501 - Meetings of Humanities Panel

Science.gov (United States)

2013-10-24

... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: National Endowment for the Humanities. ACTION: Notice of meetings. SUMMARY: Pursuant to section 10(a)(2) of the... Humanities Panel will be held during November, 2013 as follows. The purpose of the meetings is for panel...

Uncertainties in predicting solar panel power output

Science.gov (United States)

Anspaugh, B.

1974-01-01

The problem of calculating solar panel power output at launch and during a space mission is considered. The major sources of uncertainty and error in predicting the post launch electrical performance of the panel are considered. A general discussion of error analysis is given. Examples of uncertainty calculations are included. A general method of calculating the effect on the panel of various degrading environments is presented, with references supplied for specific methods. A technique for sizing a solar panel for a required mission power profile is developed.

Report of the Federal Internetworking Requirements Panel

Energy Technology Data Exchange (ETDEWEB)

NONE

1994-05-31

The Federal Internetworking Requirements Panel (FIRP) was established by the National Institute of Standards and Technology (NIST) to reassess Federal requirements for open systems networks and to recommend policy on the Government`s use of networking standards. The Panel was chartered to recommend actions which the Federal Government can take to address the short and long-term issues of interworking and convergence of networking protocols--particularly the Internet Protocol Suite (IPS) and Open Systems Interconnection (OSI) protocol suite and, when appropriate, proprietary protocols. The Panel was created at the request of the Office of Management and Budget in collaboration with the Federal Networking Council and the Federal Information Resources Management Policy Council. The Panel`s membership and charter are contained in an appendix to this report.

Examine the criteria for establishing the small span small pillar concept as a safe mining method in deep mines,Volume 1 of 1.

CSIR Research Space (South Africa)

De Frey, FSA

2002-01-01

Full Text Available with conventional breast panel 38 4.4 Critical evaluation of results 39 4.5 A recommended alternative method 41 4.6 Comparison criteria used as for other layouts 45 4.7 Conclusions and future research needs 47 5 MINE ECONOMICS 48 5.1 Mine economic criteria 48... stream_source_info GAP822.pdf.txt stream_content_type text/plain stream_size 176631 Content-Encoding UTF-8 stream_name GAP822.pdf.txt Content-Type text/plain; charset=UTF-8 Safety in Mines Research Advisory Committee...

Sound-proof Sandwich Panel Design via Metamaterial Concept

Science.gov (United States)

Sui, Ni

Sandwich panels consisting of hollow core cells and two face-sheets bonded on both sides have been widely used as lightweight and strong structures in practical engineering applications, but with poor acoustic performance especially at low frequency regime. Basic sound-proof methods for the sandwich panel design are spontaneously categorized as sound insulation and sound absorption. Motivated by metamaterial concept, this dissertation presents two sandwich panel designs without sacrificing weight or size penalty: A lightweight yet sound-proof honeycomb acoustic metamateiral can be used as core material for honeycomb sandwich panels to block sound and break the mass law to realize minimum sound transmission; the other sandwich panel design is based on coupled Helmholtz resonators and can achieve perfect sound absorption without sound reflection. Based on the honeycomb sandwich panel, the mechanical properties of the honeycomb core structure were studied first. By incorporating a thin membrane on top of each honeycomb core, the traditional honeycomb core turns into honeycomb acoustic metamaterial. The basic theory for such kind of membrane-type acoustic metamaterial is demonstrated by a lumped model with infinite periodic oscillator system, and the negative dynamic effective mass density for clamped membrane is analyzed under the membrane resonance condition. Evanescent wave mode caused by negative dynamic effective mass density and impedance methods are utilized to interpret the physical phenomenon of honeycomb acoustic metamaterials at resonance. The honeycomb metamaterials can extraordinarily improve low-frequency sound transmission loss below the first resonant frequency of the membrane. The property of the membrane, the tension of the membrane and the numbers of attached membranes can impact the sound transmission loss, which are observed by numerical simulations and validated by experiments. The sandwich panel which incorporates the honeycomb metamateiral as

Intermittent hemodialysis in dogs with chronic kidney disease stage III

Directory of Open Access Journals (Sweden)

Alessandra Melchert

2017-08-01

Full Text Available ABSTRACT: Intermittent hemodialysis (IHD is a form of renal replacement that is used in veterinary medicine for cases involving drug removal, electrolyte imbalance, acute kidney injury, and chronic kidney disease (CKD. The aim of the present study was to verify the efficacy of IHD in dogs with CKD staged at grade III and to evaluate the effect of IHD on quality of life. Twelve dogs with CKD at stage III met the inclusion criteria and were divided equally into two groups. The control group (n=6 received only clinical treatment and intravenous fluid therapy, and the hemodialysis group (n=6 received clinical and IHD treatments. Blood samples were collected before and after treatments in both groups. We evaluated complications and clinical parameters of IHD every 30 minutes. Hemodialysis decreased serum urea, creatinine, and phosphorus. Despite the evident removal of nitrogen compounds, dialysis treatment did not increase survival time in these patients. The results of this study do not support the early use of dialysis in dogs with chronic kidney disease stage III.

Thermal Analysis of Solar Panels

Science.gov (United States)

Barth, Nicolas; de Correia, João Pedro Magalhães; Ahzi, Saïd; Khaleel, Mohammad Ahmed

In this work, we propose to analyze the thermal behavior of PV panels using finite element simulations (FEM). We applied this analysis to compute the temperature distribution in a PV panel BP 350 subjected to different atmospheric conditions. This analysis takes into account existing formulations in the literature and, based on NOCT conditions, meteorological data was used to validate our approach for different wind speed and solar irradiance. The electrical performance of the PV panel was also studied. The proposed 2D FEM analysis is applied to different region's climates and was also used to consider the role of thermal inertia on the optimization of the PV device efficiency.

Advanced Ultrasupercritical (AUSC) Tube Membrane Panel Development

Energy Technology Data Exchange (ETDEWEB)

Pschirer, James [Alstom Power Inc., Windsor, CT (United States); Burgess, Joshua [Alstom Power Inc., Windsor, CT (United States); Schrecengost, Robert [Alstom Power Inc., Windsor, CT (United States)

2017-08-16

Alstom Power Inc., a wholly owned subsidiary of the General Electric Company (GE), has completed the project “Advanced Ultrasupercritical (AUSC) Tube Membrane Panel Development” under U.S. Department of Energy (DOE) Award Number DE-FE0024076. This project was part of DOE’s Novel Crosscutting Research and Development to Support Advanced Energy Systems program. AUSC Tube Membrane Panel Development was a two and one half year project to develop and verify the manufacturability and serviceability of welded tube membrane panels made from high performance materials suitable for the AUSC steam cycles, defined as high pressure steam turbine inlet conditions of 700-760°C (1292-1400°F) and 24.5-35MPa (3500-5000psi). The difficulty of this challenge lies in the fact that the membrane-welded construction imposes demands on the materials that are unlike any that exist in other parts of the boiler. Tube membrane panels have been designed, fabricated, and installed in boilers for over 50 years with relatively favorable experience when fabricated from carbon and Cr-Mo low alloy steels. The AUSC steam cycle requires membrane tube panels fabricated from materials that have not been used in a weldment with metal temperatures in the range of 582-610°C (1080-1130°F). Fabrication materials chosen for the tubing were Grade 92 and HR6W. Grade 92 is a creep strength enhanced ferritic Cr-Mo alloy and HR6W is a high nickel alloy. Once the materials were chosen, GE performed the engineering design of the panels, prepared shop manufacturing drawings, and developed manufacturing and inspection plans. After the materials were purchased, GE manufactured and inspected the tube membrane panels, determined if post fabrication heat treatment of the tube membrane panels was needed, performed pre- and post-weld heat treatment on the Grade 92 panels, conducted final nondestructive inspection of any heat treated tube membrane panels, conducted destructive inspection of the completed tube

78 FR 74175 - Meetings of Humanities Panel

Science.gov (United States)

2013-12-10

... NATIONAL FOUNDATION ON THE ARTS AND THE HUMANITIES Meetings of Humanities Panel AGENCY: National Endowment for the Humanities. ACTION: Notice of meetings. SUMMARY: Pursuant to section 10(a)(2) of the... Humanities Panel will be held during January 2014 as follows. The purpose of the meetings is for panel review...

32 CFR 724.104 - NDRB Traveling Panel.

Science.gov (United States)

2010-07-01

... 32 National Defense 5 2010-07-01 2010-07-01 false NDRB Traveling Panel. 724.104 Section 724.104 National Defense Department of Defense (Continued) DEPARTMENT OF THE NAVY PERSONNEL NAVAL DISCHARGE REVIEW BOARD Definitions § 724.104 NDRB Traveling Panel. An NDRB Panel that travels for the purpose of...

Studies on design principles and criteria of fuels and graphites for experimental multi-purpose very high temperature reactor

International Nuclear Information System (INIS)

Arai, Taketoshi; Sato, Sadao; Tani, Yutaro

1977-12-01

Design principles and criteria of fuels and graphites have been studied to determine the main design parameters of a reference core MARK-III of the Experimental Multi-purpose Very High Temperature Reactor. The present status of research and development for HTGR fuels and graphites is reviewed from a standpoint of their integrity and safety aspects, and is compared to the specific design requirements for the VHTR fuels and graphites. Consequently, reasonable materials specifications, safety criteria and design analysis methods are presented for coated fuel particle, fuel compact, graphite sleeve, core support graphite and neutron absorber material. These design principles and criteria will be refined by further experimental investigations. (auth.)

Precast concrete sandwich panels subjected to impact loading

Science.gov (United States)

Runge, Matthew W.

Precast concrete sandwich panels are a relatively new product in the construction industry. The design of these panels incorporates properties that allow for great resilience against temperature fluctuation as well as the very rapid and precise construction of facilities. The concrete sandwich panels investigated in this study represent the second generation of an ongoing research and development project. This second generation of panels have been engineered to construct midsized commercial buildings up to three stories in height as well as residential dwellings. The panels consist of a double-tee structural wythe, a foam core and a fascia wythe, joined by shear connectors. Structures constructed from these panels may be subjected to extreme loading including the effects of seismic and blast loading in addition to wind. The aim of this work was to investigate the behaviour of this particular sandwich panel when subjected to structural impact events. The experimental program consisted of fourteen concrete sandwich panels, five of which were considered full-sized specimens (2700 mm X 1200mm X 270 mm) and nine half-sized specimens (2700mm X 600mm X 270 mm) The panels were subjected to impact loads from a pendulum impact hammer where the total energy applied to the panels was varied by changing the mass of the hammer. The applied loads, displacements, accelerations, and strains at the mid-span of the panel as well as the reaction point forces were monitored during the impact. The behaviour of the panels was determined primarily from the experimental results. The applied loads at low energy levels that caused little to no residual deflection as well as the applied loads at high energy levels that represent catastrophic events and thus caused immediate failure were determined from an impact on the structural and the fascia wythes. Applied loads at intermediate energy levels representing extreme events were also used to determine whether or not the panels could withstand

Longitudinal patterns of problematic computer game use among adolescents and adults--a 2-year panel study.

Science.gov (United States)

Scharkow, Michael; Festl, Ruth; Quandt, Thorsten

2014-11-01

To investigate the longitudinal patterns (stability and change) of problematic computer game use and its interdependencies with psychosocial wellbeing in different age groups. Three-wave, annual panel study using computer-assisted telephone surveys. Germany. A total of 112 adolescents aged between 14 and 18 years, 363 younger adults between 19-39 years and 427 adults aged 40 years and older (overall n = 902). Problematic game use was measured with the Gaming Addiction Short Scale (GAS), which covers seven criteria including salience, withdrawal and conflict. Additionally, gaming behaviour and psychosocial wellbeing (social capital and support, life satisfaction and success) were measured in all three panel waves. The generally low GAS scores were very stable in yearly intervals [average autocorrelation across waves and age groups: r = 0.74, confidence interval (CI) = 0.71, 0.77]. Only nine respondents (1%, CI = 0.5, 1.9) consistently exhibited symptoms of problematic game use across all waves, while no respondent could be classified consistently as being addicted according to the GAS criteria. Changes in problematic gaming were not related consistently to changes in psychosocial wellbeing, although some cross-lagged effects were statistically significant in younger and older adult groups. Within a 2-year time-frame, problematic use of computer games appears to be a less stable behaviour than reported previously and not related systematically to negative changes in the gamers' lives. © 2014 Society for the Study of Addiction.

Case Study - Monitoring the Photovoltaic Panels

OpenAIRE

PACURAR Ana Talida; TOADER Dumitru; PACURAR Cristian

2014-01-01

The photovoltaic cell represents one of the most dynamic and attractive way to converts renewable energy sources in electricity production. That means to convert solar energy into electricity. In this paper is presented a analogy between two types of photovoltaic panels installed, with educational role for students. Also the objective of this paper is to estimate the performance of photovoltaic panels and to provide the best solution for industry. These two types of photovoltaic panels wer...

El Salvador - Rural Electrification - Solar Panels

Data.gov (United States)

Millennium Challenge Corporation — This is a summative qualitative performance evaluation (PE) of the solar panel component of the solar panel component of the RE Sub-Activity. The final report will...

Daytime space cooling with phase change material ceiling panels discharged using rooftop photovoltaic/thermal panels and night-time ventilation

DEFF Research Database (Denmark)

Bourdakis, Eleftherios; Pean, Thibault Quentin; Gennari, Luca

2016-01-01

The possibility of using photovoltaic/thermal panels for producing cold water through the process of night-time radiative cooling was experimentally examined. The cold water was used to discharge phase change material in ceiling panels in a climatic chamber. Both night-time radiative cooling...... the photovoltaic/thermal varied from 56% to 122%. The phase change material ceiling panels were thus, capable of providing an acceptable thermal environment and the photovoltaic/thermal panels were able to provide most of the required electricity and cold water needed for cooling....

7 CFR 205.509 - Peer review panel.

Science.gov (United States)

2010-01-01

... 7 Agriculture 3 2010-01-01 2010-01-01 false Peer review panel. 205.509 Section 205.509 Agriculture... PROVISIONS NATIONAL ORGANIC PROGRAM Accreditation of Certifying Agents § 205.509 Peer review panel. The Administrator shall establish a peer review panel pursuant to the Federal Advisory Committee Act (FACA) (5 U.S.C...

Performance analysis of PV panel under varying surface temperature

Directory of Open Access Journals (Sweden)

Kumar Tripathi Abhishek

2018-01-01

Full Text Available The surface temperature of PV panel has an adverse impact on its performance. The several electrical parameters of PV panel, such as open circuit voltage, short circuit current, power output and fill factor depends on the surface temperature of PV panel. In the present study, an experimental work was carried out to investigate the influence of PV panel surface temperature on its electrical parameters. The results obtained from this experimental study show a significant reduction in the performance of PV panel with an increase in panel surface temperature. A 5W PV panel experienced a 0.4% decrease in open circuit voltage for every 1°C increase in panel surface temperature. Similarly, there was 0.6% and 0.32% decrease in maximum power output and in fill factor, respectively, for every 1°C increase in panel surface temperature. On the other hand, the short circuit current increases with the increase in surface temperature at the rate of 0.09%/°C.

Uranium (III)-Plutonium (III) co-precipitation in molten chloride

Science.gov (United States)

Vigier, Jean-François; Laplace, Annabelle; Renard, Catherine; Miguirditchian, Manuel; Abraham, Francis

2018-02-01

Co-management of the actinides in an integrated closed fuel cycle by a pyrochemical process is studied at the laboratory scale in France in the CEA-ATALANTE facility. In this context the co-precipitation of U(III) and Pu(III) by wet argon sparging in LiCl-CaCl2 (30-70 mol%) molten salt at 705 °C is studied. Pu(III) is prepared in situ in the molten salt by carbochlorination of PuO2 and U(III) is then introduced as UCl3 after chlorine purge by argon to avoid any oxidation of uranium up to U(VI) by Cl2. The oxide conversion yield through wet argon sparging is quantitative. However, the preferential oxidation of U(III) in comparison to Pu(III) is responsible for a successive conversion of the two actinides, giving a mixture of UO2 and PuO2 oxides. Surprisingly, the conversion of sole Pu(III) in the same conditions leads to a mixture of PuO2 and PuOCl, characteristic of a partial oxidation of Pu(III) to Pu(IV). This is in contrast with coconversion of U(III)-Pu(III) mixtures but in agreement with the conversion of Ce(III).

Differing professional opinions: 1987 special review panel

International Nuclear Information System (INIS)

1988-01-01

In November 1987, the five-member Differing Professional Opinions Special Review Panel established by the Executive Director for Operations of the US Nuclear Regulatory Commission to review agency policies and procedures for handling differing professional opinions (DPOs) presented its findings and recommendations in NUREG-1290. The issuance of that report completed the first task of the panel's charter. In accordance with Manual chapter 4125, Section L, and the charter of the Special Review Panel, the panel's second task was to ''...review...the DPOs submitted subsequent to the previous Panel's review, in order to identify any employee whose DPO made a significant contribution to the Agency or to the public safety but who has not yet been recognized for such contribution.'' This Addendum provides the findings of that review

Photoelectric panel with equatorial mounting of drive

Science.gov (United States)

Kukhta, M. S.; Krauinsh, P. Y.; Krauinsh, D. P.; Sokolov, A. P.; Mainy, S. B.

2018-03-01

The relevance of the work is determined by the need to create effective models for sunny energy. The article considers a photoelectric panel equipped with a system for tracking the sun. Efficiency of the system is provided by equatorial mounting, which compensates for the rotation of the Earth by rotating the sunny panel in the plane of the celestial equator. The specificity of climatic and geographical conditions of Tomsk is estimated. The dynamics of power variations of photoelectric panels with equatorial mounting during seasonal fluctuations in Tomsk is calculated. A mobile photovoltaic panel with equatorial mounting of the drive has been developed. The methods of design strategy for placing photovoltaic panels in the architectural environment of the city are presented. Key words: sunny energy, photovoltaics, equatorial mounting, mechatronic model, wave reducer, electric drive.

Propulsion Systems Panel deliberations

Science.gov (United States)

Bianca, Carmelo J.; Miner, Robert; Johnston, Lawrence M.; Bruce, R.; Dennies, Daniel P.; Dickenson, W.; Dreshfield, Robert; Karakulko, Walt; Mcgaw, Mike; Munafo, Paul M.

1993-01-01

The Propulsion Systems Panel was established because of the specialized nature of many of the materials and structures technology issues related to propulsion systems. This panel was co-chaired by Carmelo Bianca, MSFC, and Bob Miner, LeRC. Because of the diverse range of missions anticipated for the Space Transportation program, three distinct propulsion system types were identified in the workshop planning process: liquid propulsion systems, solid propulsion systems and nuclear electric/nuclear thermal propulsion systems.

Retaining Ring Fastener for Solar Panels

Science.gov (United States)

Wilson, A. H.

1983-01-01

Simple articulating linkage secures solar panels into supporting framework. Five element linkage collapses into W-shape for easy placement into framework, then expands to form rectangle of same dimensions as those of panel.

Defining new criteria for selection of cell-based intestinal models using publicly available databases

Directory of Open Access Journals (Sweden)

Christensen Jon

2012-06-01

Full Text Available Abstract Background The criteria for choosing relevant cell lines among a vast panel of available intestinal-derived lines exhibiting a wide range of functional properties are still ill-defined. The objective of this study was, therefore, to establish objective criteria for choosing relevant cell lines to assess their appropriateness as tumor models as well as for drug absorption studies. Results We made use of publicly available expression signatures and cell based functional assays to delineate differences between various intestinal colon carcinoma cell lines and normal intestinal epithelium. We have compared a panel of intestinal cell lines with patient-derived normal and tumor epithelium and classified them according to traits relating to oncogenic pathway activity, epithelial-mesenchymal transition (EMT and stemness, migratory properties, proliferative activity, transporter expression profiles and chemosensitivity. For example, SW480 represent an EMT-high, migratory phenotype and scored highest in terms of signatures associated to worse overall survival and higher risk of recurrence based on patient derived databases. On the other hand, differentiated HT29 and T84 cells showed gene expression patterns closest to tumor bulk derived cells. Regarding drug absorption, we confirmed that differentiated Caco-2 cells are the model of choice for active uptake studies in the small intestine. Regarding chemosensitivity we were unable to confirm a recently proposed association of chemo-resistance with EMT traits. However, a novel signature was identified through mining of NCI60 GI50 values that allowed to rank the panel of intestinal cell lines according to their drug responsiveness to commonly used chemotherapeutics. Conclusions This study presents a straightforward strategy to exploit publicly available gene expression data to guide the choice of cell-based models. While this approach does not overcome the major limitations of such models

Lipid Panel

Science.gov (United States)

... A routine cardiac risk assessment typically includes a fasting lipid panel. Beyond that, research continues into the usefulness of other non-traditional markers of cardiac risk, such as Lp-PLA 2 . A health practitioner may choose to evaluate one or more ...

The CRRES high efficiency solar panel

International Nuclear Information System (INIS)

Trumble, T.M.

1991-01-01

This paper reports on the High Efficiency Solar Panel (HESP) experiments which is to provide both engineering and scientific information concerning the effects of space radiation on advanced gallium arsenide (GaAs) solar cells. The HESP experiment consists of an ambient panel, and annealing panel and a programmable load. This experiment, in conjunction with the radiation measurement experiments abroad the CREES, provides the first opportunity to simultaneously measure the trapped radiation belts and the results of radiation damage to solar cells. The engineering information will result in a design guide for selecting the optimum solar array characteristics for different orbits and different lifetimes. The scientific information will provide both correlation of laboratory damage effects to space damage effects and a better model for predicting effective solar cell panel lifetimes

GIS-based Multi-Criteria Analysis of Wind Farm Development

DEFF Research Database (Denmark)

Hansen, Henning Sten

2005-01-01

Due to the negative impact on the environment of traditional powergenerating methods, especially coal and oil-fired power stations wind power has increased in popularity. Achieving the goal set by the EU due to the implementation of the Kyoto protocol will require further expansion, and in order...... to facilitate this process around the Baltic Sea. A project – Wind Energy in the Baltic Sea Region - financed by EU / INTERREG III B was initiated in order to develop methods and tools to support spatial planning in relation to wind energy. The aim of the current study is to develop multi-criteria evaluations...

Expression of bovine herpesvirus 1 glycoproteins gI and gIII in transfected murine cells

International Nuclear Information System (INIS)

Fitzpatrick, D.R.; Zamb, T.; Parker, M.D.; van Drunen Littel-van den Hurk, S.; Babiuk, L.A.; Lawman, M.J.P.

1988-01-01

Genes encoding two of the major glycoproteins of bovine herpesvirus 1 (BHV-1), gI and gIII, were cloned into the eucaryotic expression vectors pRSVcat and pSV2neo and transfected into murine LMTK - cells, and cloned cell lines were established. The relative amounts of gI or gIII expressed from the two vectors were similar. Expression of gI was cell associated and localized predominantly in the perinuclear region, but nuclear and plasma membrane staining was also observed. Expression of gI was additionally associated with cell fusion and the formation of polykaryons and giant cells. Expression of gIII was localized predominantly in the nuclear and plasma membranes. Radioimmunoprecipitation in the presence or absence of tunicamycin revealed that the recombinant glycoproteins were proteolytically processed and glycosylated and had molecular weights similar to those of the forms of gI and gIII expressed in BHV-1 infected bovine cells. However, both recombinant glycoproteins were glycosylated to a lesser extent than were the forms found in BHV-1 infected bovine cells. For gI, a deficiency in N-linked glycosylated of the amino-terminal half of the protein was identified; for gIII, a deficiency in O-linked glycosylation was implicated. The reactivity pattern of a panel of gI- and gIII-specific monoclonal antibodies, including six which recognize conformation-dependent epitopes, was found to be unaffected by the glycosylation differences and was identical for transfected of BHV-1-infected murine cells. Use of the transfected cells as targets in immune-mediated cytotoxicity assays demonstrated the functional recognition of recombinant gI and gIII by murine antibody and cytotoxic T lymphocytes

EFSA Panel on Food Contact Materials, Enzymes, Flavourings and Processing Aids (CEF); Scientific Opinion on Flavouring Group Evaluation 303 (FGE.303): Spilanthol from chemical group 30

DEFF Research Database (Denmark)

Larsen, John Christian; Nørby, Karin Kristiane; Beltoft, Vibe Meister

The Scientific Panel on Food Contact Materials, Enzymes, Flavourings and Processing Aids (the Panel) was asked to provide scientific advice to the Commission on the implications for human health of chemically defined flavouring substances used in or on foodstuffs in the Member States. In particular...... of the flavouring substances in Europe. However, when the Panel examined the information provided by the European Flavouring Industry on the use levels in various foods, it appeared obvious that the MSDI approach in a number of cases would grossly underestimate the intake by regular consumers of products flavoured...... whether the conclusion for the candidate substance can be applied to the material of commerce, it is necessary to consider the available specifications. Adequate specifications including complete purity criteria and identity for the material of commerce have been provided for the flavouring substance...

Prevalence and determinants of metabolic syndrome among newly diagnosed type 2 diabetic subjects according to different criteria.

Science.gov (United States)

Hossain, Sharmin; Fatema, Kaniz; Ahmed, Kazi R; Akter, Jesmin; Chowdhury, Hasina A; Shahjahan, Md; Acharyya, Amitava; Rahim, M A; Ali, Liaquat

2015-01-01

Metabolic syndrome (MS) is becoming a serious global public health problem. The prevalence of MS differs in different population by using different definitions. Present study aimed to find out the prevalence and determinants of MS among newly diagnosed type 2 diabetes (NDT2D) according to different criteria. This cross-sectional analytic study was conducted among 281 subjects selected purposively from the OPD of BIRDEM. Information on lifestyle factors and disease history were collected using a semi-structured questionnaire by face to face interview. The three definitions of MS used in this study are from the International Diabetes Federation (IDF), a modified version of the ATP III criteria for Asian populations (modified ATP III) and World Health Organization (WHO) criteria. Adjusted odds ratio and confidence limit were generated through logistic regression. The overall prevalence of metabolic syndrome among the study subjects according to modified ATPIII, WHO and IDF criteria were 79% (95% CI: 74.2-83.8), 81% (95% CI: 76.4-85.6) and 68% (95% CI: 62.6-73.5) respectively. The prevalence of metabolic syndrome among female were higher compared to males in all the criteria's. Female gender (OR=5.93), family history of diabetes (OR=1.92), overweight (OR=6.2), and obesity (OR=5.13) were found as important confounders associated with metabolic syndrome. The prevalence of the metabolic syndrome among NDT2D is considerably higher in our population which may indicate considerable risk of cardiovascular diseases in future. Female gender, family history of diabetes, overweight and obesity are important confounders of MS in this population. Copyright © 2014 Diabetes India. Published by Elsevier Ltd. All rights reserved.

An interactive environmental model for economic growth: evidence from a panel of countries.

Science.gov (United States)

Ramakrishnan, Suresh; Hishan, Sanil S; Nabi, Agha Amad; Arshad, Zeeshan; Kanjanapathy, Malini; Zaman, Khalid; Khan, Faisal

2016-07-01

This study aims to determine an interactive environmental model for economic growth that would be supported by the "sustainability principles" across the globe. The study examines the relationship between environmental pollutants (i.e., carbon dioxide emission, sulfur dioxide emission, mono-nitrogen oxide, and nitrous oxide emission); population growth; energy use; trade openness; per capita food production; and it's resulting impact on the real per capita GDP and sectoral growth (i.e., share of agriculture, industry, and services in GDP) in a panel of 34 high-income OECD, high-income non-OECD, and Europe and Central Asian countries, for the period of 1995-2014. The results of the panel fixed effect regression show that per capita GDP are influenced by sulfur dioxide emission, population growth, and per capita food production variability, while energy and trade openness significantly increases per capita income of the region. The results of the panel Seemingly Unrelated Regression (SUR) show that carbon dioxide emission significantly decreases the share of agriculture and industry in GDP, while it further supports the share of services sector to GDP. Both the sulfur dioxide and mono-nitrogen oxide emission decreases the share of services in GDP; nitrous oxide decreases the share of industry in GDP; while mono-nitrogen oxide supports the industrial activities. The following key growth-specific results has been obtained from the panel SUR estimation, i.e., (i) Both the food production per capita and trade openness significantly associated with the increasing share of agriculture, (ii) food production and energy use significantly increases the service sectors' productivity; (iii) food production decreases the industrial activities; (iv) trade openness decreases the share of services to GDP while it supports the industrial share to GDP; and finally, (v) energy demand decreases along with the increase agricultural share in the region. The results emphasize the need for

A chemometrics study of analytical panels in virgin olive oil. An approach for evaluating panels in training

Directory of Open Access Journals (Sweden)

Aparicio, R.

1991-06-01

Full Text Available A mathematical procedure including Canonical Correlation, Factor and cluster analysis and Multiple Regression was designed to study whether two different sensory panels, with different levels of training, could be considered as a unity. Among others, correlations between each attribute of both panels, matrices of partial correlations, variance explained by the most important factors and similarity among clusters were computed as the procedure to evaluate if a Panel in training works as well as an expertise. In addition, every one of the factors was correlated with the final evaluation of quality for analyzing the interrelationship between the profile notes and the grading table of virgin olive oil quality from a mathematical point of view. Finally, a stepwise multiple correlation analyzes how the panels modeled the evaluated samples. Promising directions for future research are also suggested.

Un procedimiento matemático que incluye Correlación Canónica, Análisis Factorial y de "clusters", y Regresión Múltiple fue diseñado para estudiar si dos paneles analíticos, con diferentes niveles de entrenamiento, podrían ser considerados idénticos. Para evaluar si un panel en o después de un entrenamiento opera tan bien como uno experto, se analizaron las correlaciones entre los atributos de ambos paneles, las matrices de correlaciones parciales, la varianza explicada por los factores más importantes y la similaridad entre los aglomerados ("clusters" entre otras. Además, los tres factores más importantes fueron correlacionados con las valoraciones finales de calidad, para conocer la interrelación entre la hoja de perfil y la tabla de puntuación. Finalmente, un análisis de regresión múltiple permite conocer cómo es el modelo que los paneles han diseñado para muestras de aceite de oliva virgen evaluadas. También se sugieren las tendencias en la investigación futura.

76 FR 62455 - Aerospace Safety Advisory Panel; Meeting

Science.gov (United States)

2011-10-07

... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice (11-088)] Aerospace Safety Advisory Panel... Aeronautics and Space Administration announces a forthcoming meeting of the Aerospace Safety Advisory Panel... Burch, Aerospace Safety Advisory Panel Administrative Officer, National Aeronautics and Space...

78 FR 1265 - Aerospace Safety Advisory Panel; Meeting

Science.gov (United States)

2013-01-08

... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice 13-001] Aerospace Safety Advisory Panel... Aeronautics and Space Administration announces a forthcoming meeting of the Aerospace Safety Advisory Panel..., Aerospace Safety Advisory Panel Executive Director, National Aeronautics and Space Administration...

Panels of microporous insulation

Energy Technology Data Exchange (ETDEWEB)

McWilliams, J.A.; Morgan, D.E.; Jackson, J.D.J.

1990-08-07

Microporous thermal insulation materials have a lattice structure in which the average interstitial dimension is less than the mean free path of the molecules of air or other gas in which the material is arranged. This results in a heat flow which is less than that attributable to the molecular heat diffusion of the gas. According to this invention, a method is provided for manufacturing panels of microporous thermal insulation, in particular such panels in which the insulation material is bonded to a substrate. The method comprises the steps of applying a film of polyvinyl acetate emulsion to a non-porous substrate, and compacting powdery microporous thermal insulation material against the film so as to cause the consolidated insulation material to bond to the substrate and form a panel. The polyvinyl acetate may be applied by brushing or spraying, and is preferably allowed to dry prior to compacting the insulation material. 1 fig.

Glyphosate rodent carcinogenicity bioassay expert panel review.

Science.gov (United States)

Williams, Gary M; Berry, Colin; Burns, Michele; de Camargo, Joao Lauro Viana; Greim, Helmut

2016-09-01

Glyphosate has been rigorously and extensively tested for carcinogenicity by administration to mice (five studies) and to rats (nine studies). Most authorities have concluded that the evidence does not indicate a cancer risk to humans. The International Agency for Research on Cancer (IARC), however, evaluated some of the available data and concluded that glyphosate probably is carcinogenic to humans. The expert panel convened by Intertek assessed the findings used by IARC, as well as the full body of evidence and found the following: (1) the renal neoplastic effects in males of one mouse study are not associated with glyphosate exposure, because they lack statistical significance, strength, consistency, specificity, lack a dose-response pattern, plausibility, and coherence; (2) the strength of association of liver hemangiosarcomas in a different mouse study is absent, lacking consistency, and a dose-response effect and having in high dose males only a significant incidence increase which is within the historical control range; (3) pancreatic islet-cell adenomas (non-significant incidence increase), in two studies of male SD rats did not progress to carcinomas and lacked a dose-response pattern (the highest incidence is in the low dose followed by the high dose); (4) in one of two studies, a non-significant positive trend in the incidence of hepatocellular adenomas in male rats did not lead to progression to carcinomas; (5) in one of two studies, the non-significant positive trend in the incidence of thyroid C-cell adenomas in female rats was not present and there was no progression of adenomas to carcinomas at the end of the study. Application of criteria for causality considerations to the above mentioned tumor types and given the overall weight-of-evidence (WoE), the expert panel concluded that glyphosate is not a carcinogen in laboratory animals.

Design scenarios for flat panel photobioreactors

International Nuclear Information System (INIS)

Slegers, P.M.; Wijffels, R.H.; Straten, G. van; Boxtel, A.J.B. van

2011-01-01

Evaluation of the potential of algae production for biofuel and other products at various locations throughout the world requires assessment of algae productivity under varying light conditions and different reactor layouts. A model was developed to predict algae biomass production in flat panel photobioreactors using the interaction between light and algae growth for the algae species Phaeodactylum tricornutum and Thalassiosira pseudonana. The effect of location, variable sunlight and reactor layout on biomass production in single standing and parallel positioned flat panels was considered. Three latitudes were studied representing the Netherlands, France and Algeria. In single standing reactors the highest yearly biomass production is achieved in Algeria. During the year biomass production fluctuates the most in the Netherlands, while it is almost constant in Algeria. Several combinations of path lengths and biomass concentrations can result in the same optimal biomass production. The productivity in parallel place flat panels is strongly influenced by shading and diffuse light penetration between the panels. Panel orientation has a large effect on productivity and at higher latitudes the difference between north-south and east-west orientation may go up to 50%.

A Panel Cointegration Analysis: Thailand’s International Tourism Demand Model

OpenAIRE

Prasert Chaitip; Chukiat Chaiboonsri

2009-01-01

This paper sought to find the long-run relationships between international tourist arrivals in Thailand and economic variables such as GDP, cost of transportation and exchange rates for the period 1986 to 2007. Also this paper used five standard panel unit root tests such as LLC (2002) panel unit root test, Breitung (2000) panel unit root test, IPS (2003) panel unit root test, Maddala and Wu (1999), Choi (2001) panel unit root test, Handri (1999) panel unit root test. Moreover, the panel coin...

76 FR 19147 - Aerospace Safety Advisory Panel; Meeting.

Science.gov (United States)

2011-04-06

... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice (11-030)] Aerospace Safety Advisory Panel... Aeronautics and Space Administration announce a forthcoming meeting of the Aerospace Safety Advisory Panel.... Kathy Dakon, Aerospace Safety Advisory Panel Executive Director, National Aeronautics and Space...

78 FR 56941 - Aerospace Safety Advisory Panel; Meeting

Science.gov (United States)

2013-09-16

... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice: 13-114] Aerospace Safety Advisory Panel... Aeronautics and Space Administration announces a forthcoming meeting of the Aerospace Safety Advisory Panel.... Harmony Myers, Aerospace Safety Advisory Panel Executive Director, National Aeronautics and Space...

77 FR 25502 - Aerospace Safety Advisory Panel; Meeting

Science.gov (United States)

2012-04-30

... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice (12-030)] Aerospace Safety Advisory Panel... Aeronautics and Space Administration announce a forthcoming meeting of the Aerospace Safety Advisory Panel... FURTHER INFORMATION CONTACT: Ms. Harmony Myers, Aerospace Safety Advisory Panel Executive Director...

77 FR 38090 - Aerospace Safety Advisory Panel; Meeting.

Science.gov (United States)

2012-06-26

... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice 12-044] Aerospace Safety Advisory Panel... Aeronautics and Space Administration announces a forthcoming meeting of the Aerospace Safety Advisory Panel.... Harmony Myers, Aerospace Safety Advisory Panel Executive Director, National Aeronautics and Space...

75 FR 61219 - Aerospace Safety Advisory Panel; Meeting

Science.gov (United States)

2010-10-04

... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice (10-116)] Aerospace Safety Advisory Panel... Aeronautics and Space Administration announces a forthcoming meeting of the Aerospace Safety Advisory Panel... Dakon, Aerospace Safety Advisory Panel Executive Director, National Aeronautics and Space Administration...

77 FR 58413 - Aerospace Safety Advisory Panel; Meeting

Science.gov (United States)

2012-09-20

... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice 12-074] Aerospace Safety Advisory Panel... Aeronautics and Space Administration announces a forthcoming meeting of the Aerospace Safety Advisory Panel.... Harmony Myers, Aerospace Safety Advisory Panel Executive Director, National Aeronautics and Space...

Prognostic value of fasting versus nonfasting low-density lipoprotein cholesterol levels on long-term mortality: insight from the National Health and Nutrition Examination Survey III (NHANES-III).

Science.gov (United States)

Doran, Bethany; Guo, Yu; Xu, Jinfeng; Weintraub, Howard; Mora, Samia; Maron, David J; Bangalore, Sripal

2014-08-12

National and international guidelines recommend fasting lipid panel measurement for risk stratification of patients for prevention of cardiovascular events. However, the prognostic value of fasting versus nonfasting low-density lipoprotein cholesterol (LDL-C) is uncertain. Patients enrolled in the National Health and Nutrition Examination Survey III (NHANES-III), a nationally representative cross-sectional survey performed from 1988 to 1994, were stratified on the basis of fasting status (≥8 or fasting and nonfasting cohorts with similar baseline characteristics. The risk of outcomes as a function of LDL-C and fasting status was assessed with the use of receiver operating characteristic curves and bootstrapping methods. The interaction between fasting status and LDL-C was assessed with Cox proportional hazards modeling. Primary outcome was all-cause mortality. Secondary outcome was cardiovascular mortality. One-to-one matching based on propensity score yielded 4299 pairs of fasting and nonfasting individuals. For the primary outcome, fasting LDL-C yielded prognostic value similar to that for nonfasting LDL-C (C statistic=0.59 [95% confidence interval, 0.57-0.61] versus 0.58 [95% confidence interval, 0.56-0.60]; P=0.73), and LDL-C by fasting status interaction term in the Cox proportional hazards model was not significant (Pinteraction=0.11). Similar results were seen for the secondary outcome (fasting versus nonfasting C statistic=0.62 [95% confidence interval, 0.60-0.66] versus 0.62 [95% confidence interval, 0.60-0.66]; P=0.96; Pinteraction=0.34). Nonfasting LDL-C has prognostic value similar to that of fasting LDL-C. National and international agencies should consider reevaluating the recommendation that patients fast before obtaining a lipid panel. © 2014 American Heart Association, Inc.

Photovoltaic Thermal panels in collective thermal solar systems

International Nuclear Information System (INIS)

Elswijk, M.J.; Strootman, K.J.; Jong, M.J.M.; De Lange, E.T.N.; Smit, W.F.

2003-12-01

A feasibility study has been carried out to assess the options to apply photovoltaic/thermal panels (PVT-panels) in collective solar thermal systems in urban areas in the Netherlands. The study was focused on the technical (architecture and installations) and the economical feasibility of collective PVT-systems in comparison with conventional solar thermal systems and combinations of photovoltaic (PV) panels and solar collectors. The results of the study also give insight into cost and the market for PVT-panels. Three case studies in which collective solar collector systems were applied are analyzed again by simulating the installation of a PVT-panels system and a separate solar thermal PV system [nl

Comparison of CpG island methylator phenotype (CIMP frequency in colon cancer using different probe- and gene-specific scoring alternatives on recommended multi-gene panels.

Directory of Open Access Journals (Sweden)

Marianne Berg

Full Text Available BACKGROUND: In colorectal cancer a distinct subgroup of tumours demonstrate the CpG island methylator phenotype (CIMP. However, a consensus of how to score CIMP is not reached, and variation in definition may influence the reported CIMP prevalence in tumours. Thus, we sought to compare currently suggested definitions and cut-offs for methylation markers and how they influence CIMP classification in colon cancer. METHODS: Methylation-specific multiplex ligation-dependent probe amplification (MS-MLPA, with subsequent fragment analysis, was used to investigate methylation of tumour samples. In total, 31 CpG sites, located in 8 different genes (RUNX3, MLH1, NEUROG1, CDKN2A, IGF2, CRABP1, SOCS1 and CACNA1G were investigated in 64 distinct colon cancers and 2 colon cancer cell lines. The Ogino gene panel includes all 8 genes, in addition to the Weisenberger panel of which only 5 of the 8 genes included were investigated. In total, 18 alternative combinations of scoring of CIMP positivity on probe-, gene-, and panel-level were analysed and compared. RESULTS: For 47 samples (71%, the CIMP status was constant and independent of criteria used for scoring; 34 samples were constantly scored as CIMP negative, and 13 (20% consistently scored as CIMP positive. Only four of 31 probes (13% investigated showed no difference in the numbers of positive samples using the different cut-offs. Within the panels a trend was observed that increasing the gene-level stringency resulted in a larger difference in CIMP positive samples than increasing the probe-level stringency. A significant difference between positive samples using 'the most stringent' as compared to 'the least stringent' criteria (20% vs 46%, respectively; p<0.005 was demonstrated. CONCLUSIONS: A statistical significant variation in the frequency of CIMP depending on the cut-offs and genes included in a panel was found, with twice as many positives samples by least compared to most stringent definition

75 FR 6407 - Aerospace Safety Advisory Panel; Meeting

Science.gov (United States)

2010-02-09

... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice (10- 020)] Aerospace Safety Advisory Panel... Aeronautics and Space Administration announce a forthcoming meeting of the Aerospace Safety Advisory Panel... FURTHER INFORMATION CONTACT: Ms. Kathy Dakon, Aerospace Safety Advisory Panel Executive Director, National...

Solar Array Panels With Dust-Removal Capability

Science.gov (United States)

Dawson, Stephen; Mardesich, Nick; Spence, Brian; White, Steve

2004-01-01

It has been proposed to incorporate piezoelectric vibrational actuators into the structural supports of solar photovoltaic panels, for the purpose of occasionally inducing vibrations in the panels in order to loosen accumulated dust. Provided that the panels were tilted, the loosened dust would slide off under its own weight. Originally aimed at preventing obscuration of photovoltaic cells by dust accumulating in the Martian environment, the proposal may also offer an option for the design of solar photovoltaic panels for unattended operation at remote locations on Earth. The figure depicts a typical lightweight solar photovoltaic panel comprising a backside grid of structural spars that support a thin face sheet that, in turn, supports an array of photovoltaic cells on the front side. The backside structure includes node points where several spars intersect. According to the proposal, piezoelectric buzzers would be attached to the node points. The process of designing the panel would be an iterative one that would include computational simulation of the vibrations by use of finite- element analysis to guide the selection of the vibrational frequency of the actuators and the cross sections of the spars to maximize the agitation of dust.

Evaluation of Thin Kevlar-Epoxy Fabric Panels Subjected to Shear Loading

Science.gov (United States)

Baker, Donald J.

1996-01-01

The results of an analytical and experimental investigation of 4-ply Kevlar-49-epoxy panels loaded by in-plane shear are presented. Approximately one-half of the panels are thin-core sandwich panels and the other panels are solid-laminate panels. Selected panels were impacted with an aluminum sphere at a velocity of either 150 or 220 ft/sec. The strength of panels impacted at 150 ft/sec was not reduced when compared to the strength of the undamaged panels, but the strength of panels impacted at 220 ft/sec was reduced by 27 to 40 percent. Results are presented for panels that were cyclically loaded from a load less than the buckling load to a load in the postbuckling load range. The thin-core sandwich panels had a lower fatigue life than the solid panels. The residual strength of the solid and sandwich panels cycled more than one million cycles exceeded the baseline undamaged panel strengths. The effect of hysteresis in the response of the sandwich panels is not significant. Results of a nonlinear finite element analysis conducted for each panel design are presented.

Strong increase of solar panels

International Nuclear Information System (INIS)

Segers, R.; Janssen, S.

2012-01-01

The number of installed solar panels in 2011 has increased again. 40 megawatt of new panels have been installed. This increase is twice as high as the year before. The production of solar power increased to 90 million kWh in 2011 as a result of this expansion. However, the share of solar power in total energy use is still very limited. [nl

Gene panel testing for inherited cancer risk.

Science.gov (United States)

Hall, Michael J; Forman, Andrea D; Pilarski, Robert; Wiesner, Georgia; Giri, Veda N

2014-09-01

Next-generation sequencing technologies have ushered in the capability to assess multiple genes in parallel for genetic alterations that may contribute to inherited risk for cancers in families. Thus, gene panel testing is now an option in the setting of genetic counseling and testing for cancer risk. This article describes the many gene panel testing options clinically available to assess inherited cancer susceptibility, the potential advantages and challenges associated with various types of panels, clinical scenarios in which gene panels may be particularly useful in cancer risk assessment, and testing and counseling considerations. Given the potential issues for patients and their families, gene panel testing for inherited cancer risk is recommended to be offered in conjunction or consultation with an experienced cancer genetic specialist, such as a certified genetic counselor or geneticist, as an integral part of the testing process. Copyright © 2014 by the National Comprehensive Cancer Network.

78 FR 36793 - Aerospace Safety Advisory Panel; Meeting

Science.gov (United States)

2013-06-19

... NATIONAL AERONAUTICS AND SPACE ADMINISTRATION [Notice 13-068] Aerospace Safety Advisory Panel... Aeronautics and Space Administration announce a forthcoming meeting of the Aerospace Safety Advisory Panel..., Huntsville, AL 35805 FOR FURTHER INFORMATION CONTACT: Ms. Harmony Myers, Aerospace Safety Advisory Panel...

Improving the efficiency of photovoltaic (PV) panels by oil coating

International Nuclear Information System (INIS)

Abd-Elhady, M.S.; Fouad, M.M.; Khalil, T.

2016-01-01

Highlights: • It is possible to improve the efficiency of PV panels by increasing the amount of light transmitted to the panel. • Coating PV panels by a fine layer of Labovac oil increases the amount of sun light transmitted to the panel. • Coating PV panels by a fine layer of Labovac oil increases the power output of the panel. • Coating PV panels with a layer of Labovac oil has to be applied in cold countries and not in hot regions. - Abstract: The objective of this research is to develop a new technique for improving the efficiency of Photovoltaic (PV) panels. This technique is done by coating the front surface of the PV panel by a fine layer of oil in order to increase the amount of light transmitted to the panel, and consequently its efficiency. Different types of oils are examined, including both mineral oils and natural oils. In case of mineral oils; vacuum pump oil (Labovac oil), engine oil (Mobil oil) and brake oil (Abro oil) are examined, while in case of natural oils; olive and sunflower oils are examined. An experimental setup has been developed to examine the performance of the PV panels as a function of oil coatings. The experimental setup consists of an artificial sun, the PV panel under investigation, a cooling system and a measuring system to measure the performance of the panel. It has been found that coating the PV panel with a fine layer of Labovac oil, ∼1 mm thick, improves the efficiency of the PV panel by more than 20%, and this is due to the high transmissivity of the Labovac oil compared to other oils. However, the Labovac oil has a drawback which is overheating of the panel due to its high transmissivity. Coating of PV panels with a fine layer of Labovac oil should be done only in cold regions, in order to avoid the heating effect that can decrease the power output of PV panels.

Blood Test: Comprehensive Metabolic Panel (CMP)

Science.gov (United States)

... Staying Safe Videos for Educators Search English Español Blood Test: Comprehensive Metabolic Panel (CMP) KidsHealth / For Parents / Blood ... de sangre: panel metabólico ampliado What Is a Blood Test? A blood test is when a sample of ...

OLED Luminaire with Panel Integrated Drivers and Advanced Controls

Energy Technology Data Exchange (ETDEWEB)

Lu, Michael [Acuity Brands Lighting, Inc., Atlanta, GA (United States); Spindler, Jeff [OLEDWorks, Rochester, NY (United States)

2017-01-31

For this DOE award, Acuity Brands Lighting developed a novel OLED luminaire system featuring panel-integrated drivers at each individual OLED panel. The luminaire has a base station that receives user commands and performs AC/DC conversion. A power line communication (PLC) protocol is used to provide both power and digital control to each panel. A 66-panel CanvisTM luminaire using state-of-art OLED panels based on this system was successfully constructed. This is a first demonstration of such a luminaire architecture. It is also the first known implementation of this number of independently addressable nodes with a PLC protocol. This luminaire system architecture has added benefits in the flexibility of using multiple panel vendors for a given product, forward compatibility with future panels, and reduced luminaire wiring complexity and assembly time.

Magnetic evaluation of a solar panel using HTS-SQUID

Energy Technology Data Exchange (ETDEWEB)

Kiwa, Toshihiko, E-mail: kiwa@okayama-u.ac.jp; Fukudome, Yohei; Miyazaki, Shingo; Saari, Mohd Mawardi; Sakai, Kenji; Tsukada, Keiji

2013-11-15

Highlights: •The magnetic evaluation system of a solar panel using HTS-SQUID has been developed. •The electric circuits made by the discrete devices on the circuit board were visualized. •The electric properties of the commercial solar panels were demonstrated. -- Abstract: The magnetic evaluation system of a solar panel using HTS-SQUID has been proposed and developed. A normal pick-up coil was applied to detect the tangential magnetic field to the panel surface. Since the detected field could be related to the currents of the solar panels, the electric properties of the solar panels could be evaluated. In this work, the evaluation of the electric properties of the commercial solar panels as well as the electric circuits made by the discrete devices on the circuit board was visualized.

Magnetic evaluation of a solar panel using HTS-SQUID

International Nuclear Information System (INIS)

Kiwa, Toshihiko; Fukudome, Yohei; Miyazaki, Shingo; Saari, Mohd Mawardi; Sakai, Kenji; Tsukada, Keiji

2013-01-01

Highlights: •The magnetic evaluation system of a solar panel using HTS-SQUID has been developed. •The electric circuits made by the discrete devices on the circuit board were visualized. •The electric properties of the commercial solar panels were demonstrated. -- Abstract: The magnetic evaluation system of a solar panel using HTS-SQUID has been proposed and developed. A normal pick-up coil was applied to detect the tangential magnetic field to the panel surface. Since the detected field could be related to the currents of the solar panels, the electric properties of the solar panels could be evaluated. In this work, the evaluation of the electric properties of the commercial solar panels as well as the electric circuits made by the discrete devices on the circuit board was visualized

The history of NATO TNF policy: The role of studies, analysis and exercises conference proceedings. Volume 3: Papers by Gen. Robert C. Richardson III (Ret.)

Energy Technology Data Exchange (ETDEWEB)

Rinne, R.L. [ed.

1994-02-01

This conference was organized to study and analyze the role of simulation, analysis, modeling, and exercises in the history of NATO policy. The premise was not that the results of past studies will apply to future policy, but rather that understanding what influenced the decision process-and how-would be of value. The structure of the conference was built around discussion panels. The panels were augmented by a series of papers and presentations focusing on particular TNF events, issues, studies, or exercises. The conference proceedings consist of three volumes. Volume 1 contains the conference introduction, agenda, biographical sketches of principal participants, and analytical summary of the presentations and discussion panels. Volume 2 contains a short introduction and the papers and presentations from the conference. This volume contains selected papers by Brig. Gen. Robert C. Richardson III (Ret.).

Fabrication and testing of fire resistant graphite composite panels

Science.gov (United States)

Roper, W. D.

1986-01-01

Eight different graphite composite panels were fabricated using four different resin matrices. The resin matrices included Hercules 71775, a blend of vinylpolystyrpyridine and bismaleimide, H795, a bismaleimide, Cycom 6162, a phenolic, and PSP 6022m, a polystyrylpyridine. Graphite panels were fabricated using fabric or unidirectional tape. Described are the processes for preparing these panels and some of their mechanical, thermal and flammability properties. Panel properties are compared with state-of-the-art epoxy fiberglass composite panels.

Resistência à insulina e síndrome metabólica em pacientes ambulatoriais com transtorno do humor bipolar Insulin resistance and metabolic syndrome in outpatients with bipolar disorder

Directory of Open Access Journals (Sweden)

Fabiano Alves Gomes

2010-01-01

Full Text Available CONTEXTO: O transtorno bipolar (TB está associado a uma significativa morbi-mortalidade por causas metabólicas. Existem poucos dados sobre a prevalência de resistência à insulina (RI e sua relação com a síndrome metabólica (SM em pacientes com TB. OBJETIVO: Avaliar a prevalência de RI e SM em pacientes bipolares ambulatoriais e identificar os parâmetros clínicos associados à RI. MÉTODO: Estudo transversal em 65 pacientes com TB diagnosticados pelos critérios do DSM-IV-TR, avaliados de forma consecutiva no Programa de Transtorno Bipolar do Hospital de Clínicas de Porto Alegre, Brasil. RI foi diagnosticada utilizando o homeostatic model assessment - insulin resistance (HOMA-IR e a SM foi diagnosticada utilizando três definições diferentes: do National Cholesterol Educational Program - Adult Treatment Panel III (NCEP-ATP III; do NCEP-ATP III modificado e da International Diabetes Federation (IDF. RESULTADOS: A prevalência de RI foi 43,1% (mulheres 40%, homens 44,4%. A prevalência de SM definida pelo NCEP ATP III foi 32,3%, pelo NCEP ATP III foi 40% e pela IDF foi 41,5%. Os critérios do NCEP ATP III modificado demonstrou a melhor relação entre sensibilidade (78,6% e especificidade (89,2% na detecção de RI. A circunferência da cintura foi o parâmetro clínico mais associado à RI. CONCLUSÃO: As definições atuais de SM podem identificar, com razoável sensibilidade e especificidade, RI em pacientes com TB. A obesidade abdominal é bastante associada à RI nessa população de pacientes.BACKGROUND: Bipolar disorder (BD is associated with significant morbidity and mortality from metabolic diseases. There is a paucity of data regarding insulin resistance (IR and its relationship with the metabolic syndrome (MS in bipolar patients. OBJECTIVE: To evaluate the prevalence of both IR and MS in BD outpatients and to assess clinical criteria associated with IR. METHOD: Cross-sectional study in 65 DSM-IV-TR BD patients

Mark III LOCA-related hydrodynamic load definition. Generic technical activity B-10. Final report

International Nuclear Information System (INIS)

Fields, M.B.; Kudrick, J.A.

1984-08-01

This report, prepared by the staff of the Office of Nuclear Reactor Regulation and its consultants at the Brookhaven National Laboratory, provides a discussion of LOCA-related suppression pool hydrodynamic loads in boiling water reactor (BWR) facilities with the Mark III pressure-suppression containment design. Its issuance completes NRC Generic Technical Activity B-10, Behavior of BWR Mark III Containment. On the basis of certain large-scale tests conducted between 1973 and 1979, the General Electric Company developed LOCA-related hydrodynamic load definitions for use in the design of the standard Mark III containment. The staff and its consultants have reviewed these load definitions and their bases and conclude that, with a few specified changes, the proposed load definitions provide conservative loading conditions. The staff approved acceptance criteria for LOCA-related hydrodynamic loads are provided in an appendix

Panel Data Evidence on the Demand for Money

OpenAIRE

Serletis, Apostolos; Vaccaro, Jason

2006-01-01

This paper examines the demand for money using panel data for 48 countries over the 1980-95 time period. In our examination of the conventional money demand function, we begin by empirically exploiting traditional panel methodology and fi nd support for heterogeneity among the countries. However, specifi cation and diagnostic tests also indicate serial correlation in all of the estimated models. Recent state-of-the art advances in panel unit root and panel cointegration methodology allow us t...

Obtaining valid laboratory data in clinical trials conducted in resource diverse settings: lessons learned from a microbicide phase III clinical trial.

Directory of Open Access Journals (Sweden)

Tania Crucitti

2010-10-01

Full Text Available Over the last decade several phase III microbicides trials have been conducted in developing countries. However, laboratories in resource constrained settings do not always have the experience, infrastructure, and the capacity to deliver laboratory data meeting the high standards of clinical trials. This paper describes the design and outcomes of a laboratory quality assurance program which was implemented during a phase III clinical trial evaluating the efficacy of the candidate microbicide Cellulose Sulfate 6% (CS [1].In order to assess the effectiveness of CS for HIV and STI prevention, a phase III clinical trial was conducted in 5 sites: 3 in Africa and 2 in India. The trial sponsor identified an International Central Reference Laboratory (ICRL, responsible for the design and management of a quality assurance program, which would guarantee the reliability of laboratory data. The ICRL provided advice on the tests, assessed local laboratories, organized trainings, conducted supervision visits, performed re-tests, and prepared control panels. Local laboratories were provided with control panels for HIV rapid tests and Chlamydia trachomatis/Neisseria gonorrhoeae (CT/NG amplification technique. Aliquots from respective control panels were tested by local laboratories and were compared with results obtained at the ICRL.Overall, good results were observed. However, discordances between the ICRL and site laboratories were identified for HIV and CT/NG results. One particular site experienced difficulties with HIV rapid testing shortly after study initiation. At all sites, DNA contamination was identified as a cause of invalid CT/NG results. Both problems were timely detected and solved. Through immediate feedback, guidance and repeated training of laboratory staff, additional inaccuracies were prevented.Quality control guidelines when applied in field laboratories ensured the reliability and validity of final study data. It is essential that sponsors

Administration, Scoring, & Procedures Manual for the DSMPTSD III-R & DSMPTSD IV. A Measure of Posttraumatic Stress Disorder Structured to Meet DSM-III-R & DSM-IV Diagnostic Criteria

National Research Council Canada - National Science Library

Ursano, Robert

1997-01-01

Since many trauma and disaster studies include the Impact of Events Scale (lES) and the SCL-9O-R as core instruments, the DSMPTSD-III-R has been developed to identify PTSD with the addition of only 12 Supplemental Items to these two scales...

Sustainable Absorption Panels from Agricultural Wastes

Directory of Open Access Journals (Sweden)

Ismail F.Z.

2014-01-01

Full Text Available Noise has become a serious environmental problem and there are demands for alternative sustainable materials which capable to reduce the noise level at various frequency ranges. Therefore, the aim of this research is to study the potential of turning the agricultural waste and waste paper into a sound absorption panel. For the purpose of this study, combination of two materials was under studied; coconut coir fibre from agriculture waste and shredded waste paper from the office. There were two main objective of the research; first is to develop absorption panels from coconut coir powder that available locally with a combination of shredded paper at different percentage of mixture. Second objective is to identify the absorption rate of the panels. The study encompasses the fabrication of the particle board using the coconut husk powder mix with shredded waste paper and using the gypsum powder as the binder for the two materials. Four acoustic panels of size 0.5m x 0.5m and 0.012 m thick were fabricated with different mix ratio; 25% of coconut coir powder mixed with 75% of shredded waste papers for sample 1, 50% both of the material for sample 2, 75% of coconut coir powder mixed with 25% of shredded waste paper for sample 3, and lastly 100% of coconut coir powder for sample 4. The absorption coefficient of the panels was tested in a reverberation chamber and in accordance with ISO 354:1985 standards. Based on the results, sample 1 gave the highest absorption coefficient compared to sample 2, 3 and 4. It can be concluded that the acoustic panel made from a mixture of 25% coconut coir powder with 75% shredded waste paper provided higher absorption coefficient compared to the performance of the other samples. This might be caused by the size of the coir powder which is very small, creating less void space in between the panel and thus causing it to absorb less sound. Since sound absorption is very much affected by the availability of void space of

Low frequency noise reduction using stiff light composite panels

Institute of Scientific and Technical Information of China (English)

DENG Yongchang; LIN Weizheng

2003-01-01

The experiment presented in this paper is to investigate and analyze the noise reduction at low frequency using stiff light composite panels. Since these composite panels are made of lightweight and stiff materials, this actuation strategy will enable the creation of composite panels for duct noise control without using traditional heavy structural mass. The results suggest that the mass-spring resonance absorption in the case of a comparatively stiff thick panel with a thin flexible plate is more efficient with minimum weight, when subjected to low-frequency (<500 Hz). The efficiency of the panel absorber depends on the mass of the thin flexible plate and the stiffness of the panel.

Doublet III neutral beam injector test tank cryopanel design

International Nuclear Information System (INIS)

Doll, D.W.; Kamperschroer, J.H.; Arend, P.V.

1980-03-01

A simple condensing cryopanel has been designed for the Doublet III neutral beam test tank with a 320,000 liters per second pumping capacity for hydrogen. This maintains a vacuum in the test tank which simulates the Doublet III vessel, 1.3 x 10 -3 Pa (approx.10 -5 torr). The hydrogen gas load comes from the beam striking the test tank calorimeter and amounts to about 7.2 torr liters per second. The cryopanel is cylindrical shaped with a liquid helium (LHe) surface that pumps through liquid nitrogen (LN) cooled aluminum chevrons located in squirrel-cage fashion around the inside surface of the cylinder. The LHe cooled surface is a smooth cylinder 2.09m in diameter by .69m long with LHe flowing in a approx. 1mm annular space between concentric cylinders. The chevrons which are not blackened are cooled from each end with LN flowing in ring manifolds that serve as the primary cryopanel structure. The LHe is force fed at 55.2 kPa remaining in the liquid phase through the panel. External heat exchanger capability permits use of helium at 3.8 to 4.2 0 K. Normal operating flow rate is 1.4 g/sec for a heat load expected to be 12.2 W total

45 CFR 1801.22 - Interview of Finalists with panel.

Science.gov (United States)

2010-10-01

... 45 Public Welfare 4 2010-10-01 2010-10-01 false Interview of Finalists with panel. 1801.22 Section... FOUNDATION HARRY S. TRUMAN SCHOLARSHIP PROGRAM The Competition § 1801.22 Interview of Finalists with panel. The Foundation invites each Finalist to an interview with a regional review panel. Panels evaluate...

Characteristics and Psychiatric Symptoms of Internet Gaming Disorder among Adults Using Self-Reported DSM-5 Criteria

Science.gov (United States)

Kim, Na Ri; Hwang, Samuel Suk-Hyun; Choi, Jung-Seok; Kim, Dai-Jin; Demetrovics, Zsolt; Király, Orsolya; Nagygyörgy, Katalin; Griffiths, Mark. D.; Hyun, So Yeon; Youn, Hyun Chul

2016-01-01

Objective The Section III of the Diagnostic and Statistical Manual of Mental Disorders, Fifth Edition (DSM-5) proposed nine diagnostic criteria and five cut-point criteria for Internet Gaming Disorder (IGD). We aimed to examine the efficacy of such criteria. Methods Adults (n=3041, men: 1824, women: 1217) who engaged in internet gaming within last 6 months completed a self-report online survey using the suggested wordings of the criteria in DSM-5. Major characteristics, gaming behavior, and psychiatric symptoms of IGD were analyzed using ANOVA, chi-square, and correlation analyses. Results The sociodemographic variables were not statistically significant between the healthy controls and the risk group. Among the participants, 419 (13.8%) were identified and labeled as the IGD risk group. The IGD risk group scored significantly higher on all motivation subscales (psymptom dimensions, i.e., somatization, obsession-compulsion, interpersonal sensitivity, depression, anxiety, hostility, phobic anxiety, paranoid ideation, and psychoticism (p<0.001). Conclusion The IGD risk group showed differential psychopathological manifestations according to DSM-5 IGD diagnostic criteria. Further studies are needed to evaluate the reliability and validity of the specific criteria, especially for developing screening instruments. PMID:26766947

Characterization of Air-Based Photovoltaic Thermal Panels with Bifacial Solar Cells

Directory of Open Access Journals (Sweden)

P. Ooshaksaraei

2013-01-01

Full Text Available Photovoltaic (PV panels account for a majority of the cost of photovoltaic thermal (PVT panels. Bifacial silicon solar panels are attractive for PVT panels because of their potential to enhance electrical power generation from the same silicon wafer compared with conventional monofacial solar panels. This paper examines the performance of air-based bifacial PVT panels with regard to the first and second laws of thermodynamics. Four air-based bifacial PVT panels were designed. The maximum efficiencies of 45% to 63% were observed for the double-path-parallel bifacial PVT panel based on the first law of thermodynamics. Single-path bifacial PVT panel represents the highest exergy efficiency (10%. Double-path-parallel bifacial PVT panel is the second preferred design as it generates up to 20% additional total energy compared with the single-path panel. However, the daily average exergy efficiency of a double-path-parallel panel is 0.35% lower than that of a single-path panel.

Global status of recycling waste solar panels: A review.

Science.gov (United States)

Xu, Yan; Li, Jinhui; Tan, Quanyin; Peters, Anesia Lauren; Yang, Congren

2018-05-01

With the enormous growth in the development and utilization of solar-energy resources, the proliferation of waste solar panels has become problematic. While current research into solar panels has focused on how to improve the efficiency of the production capacity, the dismantling and recycling of end-of-life (EOL) panels are seldom considered, as can be seen, for instance, in the lack of dedicated solar-panel recycling plants. EOL solar-panel recycling can effectively save natural resources and reduce the cost of production. To address the environmental conservation and resource recycling issues posed by the huge amount of waste solar panels regarding environmental conservation and resource recycling, the status of the management and recycling technologies for waste solar panels are systemically reviewed and discussed in this article. This review can provide a quantitative basis to support the recycling of PV panels, and suggests future directions for public policy makers. At present, from the technical aspect, the research on solar panel recovery is facing many problems, and we need to further develop an economically feasible and non-toxic technology. The research on solar photovoltaic panels' management at the end of life is just beginning in many countries, and there is a need for further improvement and expansion of producer responsibility. Copyright © 2018 Elsevier Ltd. All rights reserved.

75 FR 17701 - High Energy Physics Advisory Panel

Science.gov (United States)

2010-04-07

... DEPARTMENT OF ENERGY High Energy Physics Advisory Panel AGENCY: Department of Energy, Office of... Physics Advisory Panel (HEPAP). Federal Advisory Committee Act (Pub. L. 92-463, 86 Stat. 770) requires... Energy Physics Advisory Panel; U.S. Department of Energy; SC-25/ Germantown Building, 1000 Independence...

Performance Evaluation of PV Panel Under Dusty Condition

Directory of Open Access Journals (Sweden)

Abhishek Kumar Tripathi

2017-11-01

Full Text Available The performance of PV panel depends on the incoming sunlight on its surface. The accumulated airborne dust particles on panel surface creates a barrier in the path of sunlight and panel surface, which significantly reduces the amount of solar radiation falling on the panel surface. The present study shows a significant reduction in short circuit current and power output of PV panel due to dust deposition on its surface, whereas the reduction in open circuit voltage is not much prominent. This study has been carried in the field as well as in the laboratory. The reduction in maximum power output of PV panel for both the studies ensures a linear relation with the dust deposition on its surface. In the field study, the reduction in the power output due to 12.86gm of dust deposition on the panel surface was 43.18%, whereas in the laboratory study it was 44.75% due to 11gm of dust deposition Article History: Received July 10th 2017; Received in revised form Sept 15th 2017x; Accepted 1st Oct 2017; Available online How to Cite This Article: Tripathi, A.K., Aruna, M. and Murthy, Ch.,S.N. (2017. Performance Evaluation of PV Panel Under Dusty Condition. International Journal of Renewable Energy Develeopment, 6(3, 225-233. https://doi.org/10.14710/ijred.6.3.225-233

ACR appropriateness criteria blunt chest trauma.

Science.gov (United States)

Chung, Jonathan H; Cox, Christian W; Mohammed, Tan-Lucien H; Kirsch, Jacobo; Brown, Kathleen; Dyer, Debra Sue; Ginsburg, Mark E; Heitkamp, Darel E; Kanne, Jeffrey P; Kazerooni, Ella A; Ketai, Loren H; Ravenel, James G; Saleh, Anthony G; Shah, Rakesh D; Steiner, Robert M; Suh, Robert D

2014-04-01

Imaging is paramount in the setting of blunt trauma and is now the standard of care at any trauma center. Although anteroposterior radiography has inherent limitations, the ability to acquire a radiograph in the trauma bay with little interruption in clinical survey, monitoring, and treatment, as well as radiography's accepted role in screening for traumatic aortic injury, supports the routine use of chest radiography. Chest CT or CT angiography is the gold-standard routine imaging modality for detecting thoracic injuries caused by blunt trauma. There is disagreement on whether routine chest CT is necessary in all patients with histories of blunt trauma. Ultimately, the frequency and timing of CT chest imaging should be site specific and should depend on the local resources of the trauma center as well as patient status. Ultrasound may be beneficial in the detection of pneumothorax, hemothorax, and pericardial hemorrhage; transesophageal echocardiography is a first-line imaging tool in the setting of suspected cardiac injury. In the blunt trauma setting, MRI and nuclear medicine likely play no role in the acute setting, although these modalities may be helpful as problem-solving tools after initial assessment. The ACR Appropriateness Criteria are evidence-based guidelines for specific clinical conditions that are reviewed every 2 years by a multidisciplinary expert panel. The guideline development and review include an extensive analysis of current medical literature from peer-reviewed journals and the application of a well-established consensus methodology (modified Delphi) to rate the appropriateness of imaging and treatment procedures by the panel. In those instances in which evidence is lacking or not definitive, expert opinion may be used to recommend imaging or treatment. Copyright © 2014 American College of Radiology. Published by Elsevier Inc. All rights reserved.

Analysis of Panel Data

Science.gov (United States)

Hsiao, Cheng

2003-02-01

Panel data models have become increasingly popular among applied researchers due to their heightened capacity for capturing the complexity of human behavior, as compared to cross-sectional or time series data models. This second edition represents a substantial revision of the highly successful first edition (1986). Recent advances in panel data research are presented in an accessible manner and are carefully integrated with the older material. The thorough discussion of theory and the judicious use of empirical examples make this book useful to graduate students and advanced researchers in economics, business, sociology and political science.

Design studies for the Mark-III core of experimental multi-purpose VHTR

International Nuclear Information System (INIS)

Yasuno, Takehiko; Miyamoto, Yoshiaki; Mitake, Susumu; Shindo, Ryuiti; Arai, Taketoshi

1979-08-01

The Mark-III core in the first conceptual design made in 1975 is a fundamental core for VHTR. Subsequently, further design studies were made fuel loading scheme and control rod withdrawal sequence for the core to increase its safety margin (shutdown margin, etc.) and operational margin (minimum Reynolds number, maximum fuel temperature, etc.). It was shown that the Mark-III should exhibit the performance expected of VHTR, unless changes are made in the preconditions for its nuclear, thermal-hydraulic design. Also, the needs as below were indicated: (1) reasonable core design criteria and guidelines, (2) fuel-loading-scheme requirements in fuel management, fuel misloading and reactor operation, (3) confirmation on precision of the core design method and its further refinement. (author)

Origami-Inspired Folding of Thick, Rigid Panels

Science.gov (United States)

Trease, Brian P.; Thomson, Mark W.; Sigel, Deborah A.; Walkemeyer, Phillip E.; Zirbel, Shannon; Howell, Larry; Lang, Robert

2014-01-01

To achieve power of 250 kW or greater, a large compression ratio of stowed-to-deployed area is needed. Origami folding patterns were used to inspire the folding of a solar array to achieve synchronous deployment; however, origami models are generally created for near-zero-thickness material. Panel thickness is one of the main challenges of origami-inspired design. Three origami-inspired folding techniques (flasher, square twist, and map fold) were created with rigid panels and hinges. Hinge components are added to the model to enable folding of thick, rigid materials. Origami models are created assuming zero (or near zero) thickness. When a material with finite thickness is used, the panels are required to bend around an increasingly thick fold as they move away from the center of the model. The two approaches for dealing with material thickness are to use membrane hinges to connect the panels, or to add panel hinges, or hinges of the same thickness, at an appropriate width to enable folding.

The Atomic Safety and Licensing Board Panel

International Nuclear Information System (INIS)

1998-01-01

Through the Atomic Energy Act, Congress made is possible for the public to get a full and fair hearing on civilian nuclear matters. Individuals who are directly affected by any licensing action involving a facility producing or utilizing nuclear materials may participate in a formal hearing, on the record, before independent judges on the Atomic Safety and Licensing Board Panel (ASLBP or Panel). Frequently, in deciding whether a license, permit, amendment, or extension should be granted to a particular applicant, the Panel members must be more than mere umpires. If appropriate, they are authorized to go beyond the issues the parties place before them in order to identify, explore, and resolve significant questions involving threats to the public health and safety that come to a board's attention during the proceedings. This brochure explains the purpose of the panel. Also addressed are: type of hearing handled; method of public participation; formality of hearings; high-level waste; other panel responsibilities and litigation technology

Packaging, deployment, and panel design concepts for a truss-stiffened 7-panel precision deployable reflector with feed boom

Science.gov (United States)

Heard, Walter L., Jr.; Collins, Timothy J.; Dyess, James W.; Kenner, Scott; Bush, Harold G.

1993-01-01

A concept is presented for achieving a remotely deployable truss-stiffened reflector consisting of seven integrated sandwich panels that form the reflective surface, and an integrated feed boom. The concept has potential for meeting aperture size and surface precision requirements for some high-frequency microwave remote sensing applications. The packaged reflector/feed boom configuration is a self-contained unit that can be conveniently attached to a spacecraft bus. The package has a cylindrical envelope compatible with typical launch vehicle shrouds. Dynamic behavior of a deployed configuration having a 216-inch focal length and consisting of 80-inch-diameter, two-inch-thick panels is examined through finite-element analysis. Results show that the feed boom and spacecraft bus can have a large impact on the fundamental frequency of the deployed configuration. Two candidate rib-stiffened sandwich panel configurations for this application are described, and analytical results for panel mass and stiffness are presented. Results show that the addition of only a few rib stiffeners, if sufficiently deep, can efficiently improve sandwich panel stiffness.

Panel-basierte Mixed-Methods-Studien

OpenAIRE

Legewie, Nicolas; Tucci, Ingrid

2016-01-01

Mixed-Methods-Studien erfreuen sich wachsender Beliebtheit. Immer mehr Studien nutzen dabei auch Panel-basierte Mixed-Methods-Designs, in denen bestehende Längsschnittstudien durch qualitative Befragungsformen ergänzt werden. Innerhalb der reichhaltigen Veröffentlichungen zum Thema Mixed-Methods-Forschung finden sich bisher aber kaum Diskussionen solcher Mixed-Methods-Designs. Im vorliegenden Artikel diskutieren wir Design, Durchführung, sowie Potenzialeund Herausforderungen von Panel-basiert...

Alternative approaches for econometric analysis of panel count data using dynamic latent class models (with application to doctor visits data).

Science.gov (United States)

Hyppolite, Judex; Trivedi, Pravin

2012-06-01

Cross-sectional latent class regression models, also known as switching regressions or hidden Markov models, cannot identify transitions between classes that may occur over time. This limitation can potentially be overcome when panel data are available. For such data, we develop a sequence of models that combine features of the static cross-sectional latent class (finite mixture) models with those of hidden Markov models. We model the probability of movement between categories in terms of a Markovian structure, which links the current state with a previous state, where state may refer to the category of an individual. This article presents a suite of mixture models of varying degree of complexity and flexibility for use in a panel count data setting, beginning with a baseline model which is a two-component mixture of Poisson distribution in which latent classes are fixed and permanent. Sequentially, we extend this framework (i) to allow the mixing proportions to be smoothly varying continuous functions of time-varying covariates, (ii) to add time dependence to the benchmark model by modeling the class-indicator variable as a first-order Markov chain and (iii) to extend item (i) by making it dynamic and introducing covariate dependence in the transition probabilities. We develop and implement estimation algorithms for these models and provide an empirical illustration using 1995-1999 panel data on the number of doctor visits derived from the German Socio-Economic Panel. Copyright © 2012 John Wiley & Sons, Ltd.

Thermodecomposition of lanthanides (III) and ytrium (III) glucoheptonates

International Nuclear Information System (INIS)

Giolito, J.

1987-01-01

The lanthanides (III) and yttrium (III) glucoheptonates as well the D-glucoheptono 1-4 lactone were studied using common analytical methods, elemental microanalysis of carbon and hydrogen, thermogravimetry and differential scanning calorimetry. These compounds were prepared from the reaction between the lanthanides (III) and yttrium (III) hydroxides and glucoheptonic acid aqueous solution obtained by means of the delta lactone hydrolysis of this acid. After stoichiometric reaction the compounds were precipitated by the addition of absolute ethanol, washed with the same solvent and dried in desiccator. Thermogravimetric the (TG) curves of the lanthanides glucoheptonates of the ceric group present thermal profiles with enough differences permitting an easy caracterization of each compound and the yttrium (III) glucoheptonate TG curve showed a great similarity with the erbium (III) compound TG curve. The differential scanning calometry (DSC) curves showed endothermic and exothermic peaks by their shape, height and position (temperature) permit an easy and rapid identification of each compound specially if DSC and TG curves were examined simultaneously. (author) [pt

The Moessbauer effect in Fe(III) HEDTA, Fe(III) EDTA, and Fe(III) CDTA compounds

International Nuclear Information System (INIS)

Prado, F.R.

1989-01-01

The dependence of Moessbauer spectra with pH value of Fe(III)HEDTA and Fe(III)CDTA compounds is studied. Informations on formation processes of LFe-O-FeL (L=ligand) type dimers by the relation of titration curves of Fe(III)EDTA, Fe(III)HEDTA and Fe(III)CDTA compounds with the series of Moessbauer spectra, are obtained. Some informations on Fe-O-Fe bond structure are also obtained. Comparing the titration curves with the series of Moessbauer spectra, it is concluded that the dimerization process begins when a specie of the form FeXOH α (X = EDTA, HEDTA, CDTA; α = -1, -2) arises. (M.C.K.) [pt

75 FR 73166 - Art Advisory Panel-Closed Meeting

Science.gov (United States)

2010-11-29

... DEPARTMENT OF THE TREASURY Internal Revenue Service Art Advisory Panel--Closed Meeting AGENCY: Internal Revenue Service, Treasury. ACTION: Notice of Closed Meeting of Art Advisory Panel for Decorative Art. SUMMARY: A closed meeting of the Art Advisory Panel will be held in Washington, DC. DATES: The...

50 CFR 600.760 - Fishery Negotiation Panel lifetime.

Science.gov (United States)

2010-10-01

... 50 Wildlife and Fisheries 8 2010-10-01 2010-10-01 false Fishery Negotiation Panel lifetime. 600... ATMOSPHERIC ADMINISTRATION, DEPARTMENT OF COMMERCE MAGNUSON-STEVENS ACT PROVISIONS Fishery Negotiation Panels § 600.760 Fishery Negotiation Panel lifetime. (a) An FNP shall terminate upon either: (1) Submission of...

Variation in X-ray dose quantity using an amorphous selenium based flat-panel detector - a study on the dose reduction rate up to the limit of diagnostical utilization

International Nuclear Information System (INIS)

Lehnert, T.; Wohlers, J.; Manegold, K.; Wetter, A.; Jacobi, V.; Mack, M.G.; Vogl, T.J.; Streng, W.

2006-01-01

Purpose: To evaluate the diagnostic quality and minimum required dose to obtain acceptable images for diagnostic purposes in the field of musculoskeletal radiology. Materials and methods: A critical comparison of the image quality produced by a novel flat panel detector and the conventional screen/film system using a contrast-detail phantom was performed in phase I. Images from both systems were obtained with the same dose and displayed with similar contrast and density. In phase II images of significant anatomical structures in cadaver extremities obtained using the digital detector system and the standard film/screen system were critically evaluated. After a successive reduction in the X-ray dose for 84 patients in phase III, eight independent radiologists compared the image quality of the screen/film system to that of the novel flat panel detector. Results: Phases I and II revealed a difference in the image quality achieved by the standard screen/film system and the digital detector system to the advantage of the digital detector system. In 77 of 84 patients (91.7%), phase III showed equal image quality after a 50% reduction in the X-ray dose. In 3 cases (3.6%) the image quality and the level of contrast were better. No unified statement could be made for 4 patients (4.7%). Conclusion: Digital imaging of skeletal disorders using the novel flat panel detector makes it possible to reduce the X-ray dose by 50% with equal or even better image quality. (orig.)

49 CFR 845.22 - Technical panel.

Science.gov (United States)

2010-10-01

... 49 Transportation 7 2010-10-01 2010-10-01 false Technical panel. 845.22 Section 845.22... Technical panel. The Director, Bureau of Accident Investigation, or the Director, Bureau of Field Operations, shall designate members of the Board's technical staff to participate in the hearing and initially...

Robust block bootstrap panel predictability tests

NARCIS (Netherlands)

Westerlund, J.; Smeekes, S.

2013-01-01

Most panel data studies of the predictability of returns presume that the cross-sectional units are independent, an assumption that is not realistic. As a response to this, the current paper develops block bootstrap-based panel predictability tests that are valid under very general conditions. Some

Geothermal Technologies Program Blue Ribbon Panel Recommendations

Energy Technology Data Exchange (ETDEWEB)

none,

2011-06-17

The Geothermal Technologies Program assembled a geothermal Blue Ribbon Panel on March 22-23, 2011 in Albuquerque, New Mexico for a guided discussion on the future of geothermal energy in the United States and the role of the DOE Program. The Geothermal Blue Ribbon Panel Report captures the discussions and recommendations of the experts. An addendum is available here: http://www.eere.energy.gov/geothermal/pdfs/gtp_blue_ribbon_panel_report_addendum10-2011.pdf

Mode system effects in an online panel study : Comparing a probability-based online panel with two face-to-face reference surveys

NARCIS (Netherlands)

Struminskaya, Bella; de Leeuw, E.D.; Kaczmirek, Lars

2015-01-01

One of the methods for evaluating online panels in terms of data quality is comparing the estimates that the panels provide with benchmark sources. For probability-based online panels, high-quality surveys or government statistics can be used as references. If differences among the benchmark and the

Metabolic syndrome in Type 2 diabetes: Comparison of WHO, modified ATPIII and IDF criteria

International Nuclear Information System (INIS)

Ahmed, A.; Khan, T.E.; Yasmeen, T.; Awan, S.; Islam, N.

2012-01-01

Objectives: To determine the frequency of metabolic syndrome in type 2 diabetes according to three commonly used operational definitions (World Health Organization(WHO), National Cholesterol Education Program Adult Treatment Panel( NCEP ATP III) and International Diabetes Federation( IDF)). To evaluate the agreement between these classifications in the Pakistani cohort. Methods: Data was collected retrospectively of 210 patients with type 2 diabetes visiting outpatient clinics of one of the large tertiary care hospitals at Karachi, Pakistan between June 2008 to November 2008. Results: The prevalence of metabolic syndrome was found to be 81.4% (WHO), 86.7 %( IDF) and 91.9 %( NCEP ATPIII). The degree of agreement (kappa statistic) was found to be highest among IDF and NCEP ATPIII (0.728) as compared to (0.436 and 0.417) between WHO and ATP and WHO and IDF respectively. The most significant predictors for metabolic syndrome were found out to be female gender OR= 8.74 95% CI 1.51-50.53, low HDL cholesterol levels OR= 0.89 95% CI 0.84-0.94 and high systolic blood pressure OR= 1.06 95% CI 1.009-1.11. Conclusion: Our study results suggested that NCEP ATPIII and IDF are the most reliable criteria for diagnosing metabolic syndrome in type 2 diabetic patients, with NECP capturing more patients in comparison to IDF definition. The alarmingly high frequency of metabolic syndrome in type 2 diabetes found in this study suggests that primary prevention strategies should be initiated earlier and early in this ethnic group and our health care system should be geared up to cope with this deadly quartet. (author)

Sound transmission through triple-panel structures lined with poroelastic materials

Science.gov (United States)

Liu, Yu

2015-03-01

In this paper, previous theories on the prediction of sound transmission loss for a double-panel structure lined with poroelastic materials are extended to address the problem of a triple-panel structure. Six typical configurations are considered for a triple-panel structure based on the method of coupling the porous layers to the facing panels which determines critically the sound insulation performance of the system. The transfer matrix method is employed to solve the system by applying appropriate types of boundary conditions for these configurations. The transmission loss of the triple-panel structures in a diffuse sound field is calculated as a function of frequency and compared with that of corresponding double-panel structures. Generally, the triple-panel structure with poroelastic linings has superior acoustic performance to the double-panel counterpart, remarkably in the mid-high frequency range and possibly at low frequencies, by selecting appropriate configurations in which those with two air gaps in the structure exhibit the best overall performance over the entire frequency range. The poroelastic lining significantly lowers the cut-on frequency above which the triple-panel structure exhibits noticeably higher transmission loss. Compared with a double-panel structure, the wider range of system parameters for a triple-panel structure due to the additional partition provides more design space for tuning the sound insulation performance. Despite the increased structural complexity, the triple-panel structure lined with poroelastic materials has the obvious advantages in sound transmission loss while without the penalties in weight and volume, and is hence a promising replacement for the widely used double-panel sandwich structure.

2016 Classification criteria for macrophage activation syndrome complicating systemic juvenile idiopathic arthritis : A European league against Rheumatism/American college of Rheumatology/Paediatric rheumatology international trials organisation collaborative initiative

NARCIS (Netherlands)

Ravelli, Angelo; Minoia, Francesca; Davì, Sergio; Horne, Anna Carin; Bovis, Francesca; Pistorio, Angela; Aricò, Maurizio; Avcin, Tadej; Behrens, Edward M.; De Benedetti, Fabrizio; Filipovic, Lisa; Grom, Alexei A.; Henter, Jan Inge; Ilowite, Norman T.; Jordan, Michael B.; Khubchandani, Raju; Kitoh, Toshiyuki; Lehmberg, Kai; Lovell, Daniel J.; Miettunen, Paivi; Nichols, Kim E.; Ozen, Seza; Schmid, Jana Pachlopnik; Ramanan, Athimalaipet V.; Russo, Ricardo; Schneider, Rayfel; Sterba, Gary; Uziel, Yosef; Wallace, Carol; Wouters, Carine; Wulffraat, Nico; Demirkaya, Erkan; Brunner, Hermine I.; Martini, Alberto; Ruperto, Nicolino; Cron, Randy Q.

2016-01-01

To develop criteria for the classification of macrophage activation syndrome (MAS) in patients with systemic juvenile idiopathic arthritis (JIA). A multistep process, based on a combination of expert consensus and analysis of real patient data, was conducted. A panel of 28 experts was first asked to

Touch panel system for control applications

International Nuclear Information System (INIS)

Crook, K.; Johnson, R.

1976-12-01

The use of finger-sensitive touch panels in association with computer-generated displays for control and monitoring of the Stanford linear accelerator is discussed. This control concept has proven to be very effective. The hardware and software aspects of the Touch Panel portion of the control system are described

Design for whipping pipe impact on reinforced concrete panels

International Nuclear Information System (INIS)

Chen, C.C.; Gurbuz, O.

1984-01-01

This paper describes determination of local and overall effects on reinforced concrete panels due to whipping pipe impact in postulated pipe break events. Local damage includes the prediction of minimum concrete panel thickness required to prevent spalling from the back face of the target reinforced concrete panels. Evaluation of overall effect deals with the ductility ratio calculation for the target reinforced concrete panels. Design curves for determining the minimum panel thickness and the minimum reinforcement of reinforced concrete panels are presented in this paper for some cases commonly encountered in nuclear applications. The methodology and the results provided can be used to determine if an existing reinforced concrete wall is capable of resisting the whipping pipe impact, and consequently, if pipe whip restraints can be eliminated

Linear Strength Vortex Panel Method for NACA 4412 Airfoil

Science.gov (United States)

Liu, Han

2018-03-01

The objective of this article is to formulate numerical models for two-dimensional potential flow over the NACA 4412 Airfoil using linear vortex panel methods. By satisfying the no penetration boundary condition and Kutta condition, the circulation density on each boundary points (end point of every panel) are obtained and according to which, surface pressure distribution and lift coefficients of the airfoil are predicted and validated by Xfoil, an interactive program for the design and analysis of airfoil. The sensitivity of results to the number of panels is also investigated in the end, which shows that the results are sensitive to the number of panels when panel number ranges from 10 to 160. With the increasing panel number (N>160), the results become relatively insensitive to it.

Standard practice for acoustic emission examination of plate-like and flat panel composite structures used in aerospace applications

CERN Document Server

American Society for Testing and Materials. Philadelphia

2010-01-01

1.1 This practice covers acoustic emission (AE) examination or monitoring of panel and plate-like composite structures made entirely of fiber/polymer composites. 1.2 The AE examination detects emission sources and locates the region(s) within the composite structure where the emission originated. When properly developed AE-based criteria for the composite item are in place, the AE data can be used for nondestructive examination (NDE), characterization of proof testing, documentation of quality control or for decisions relative to structural-test termination prior to completion of a planned test. Other NDE methods may be used to provide additional information about located damage regions. For additional information see Appendix X1. 1.3 This practice can be applied to aerospace composite panels and plate-like elements as a part of incoming inspection, during manufacturing, after assembly, continuously (during structural health monitoring) and at periodic intervals during the life of a structure. 1.4 This pra...

Sorption of trace amounts of gallium (III) on iron (III) oxide

International Nuclear Information System (INIS)

Music, S.; Gessner, M.; Wolf, R.H.H.

1979-01-01

The sorption of trace amounts of gallium(III) on iron(III) oxide has been studied as a function of pH. Optimum conditions have been found for the preconcentration of traces of gallium(III) by iron(III) oxide. The influence of surface active substances and of complexing agents on the sorption of trace amounts of gallium(III) on iron(III) oxide has been also studied. (orig.) [de

Sorption of trace amounts of gallium (III) on iron (III) oxide

Energy Technology Data Exchange (ETDEWEB)

Music, S; Gessner, M; Wolf, R H.H. [Institut Rudjer Boskovic, Zagreb (Yugoslavia)

1979-01-01

The sorption of trace amounts of gallium(III) on iron(III) oxide has been studied as a function of pH. Optimum conditions have been found for the preconcentration of traces of gallium(III) by iron(III) oxide. The influence of surface active substances and of complexing agents on the sorption of trace amounts of gallium(III) on iron(III) oxide has been also studied.

Ballistic study of Tensylon®–based panels

Directory of Open Access Journals (Sweden)

L-C. Alil

2018-06-01

Full Text Available Ballistic protection is a matter of interest requested by civilian as well as military needs. The last decade has witnessed an increase in the use of light weight and efficient armour systems. These panels may be used for body protection as well as light vehicle protection against small calibres or to enhance the protection level of heavier vehicles with decreasing or maintaining their weight penalty. Ultra high molecular weight polyethylene is a material of interest for light weight armour applications. The authors designed panels made of hot–pressed Tensylon® in different configurations with thin steel sheets as a backing and shield protection. Comparison of their ballistic performance to the theory predictions reveals the improved ballistic response of the panels. In addition, a non–pressed Tensylon® panel has been tested in order to facilitate the observations of the failure mechanisms inside the panels. Even if not suitable for practical use, such non–pressed panels clearly reveal the dynamic processes at micro–scale that occur during the impact. The failure mechanisms of the material under bullet penetration are discussed based on photography, optical microscopy and scanning electron microscopy. The supposed effects of the panel pressing are discussed based on the observed difference between pressed and non–pressed structures ballistic response.

Appropriate Use Criteria for Fluoroscopically Guided Diagnostic and Therapeutic Sacroiliac Interventions: Results from the Spine Intervention Society Convened Multispecialty Collaborative.

Science.gov (United States)

MacVicar, John; Kreiner, D Scott; Duszynski, Belinda; Kennedy, David J

2017-11-01

To provide an overview of a multisociety effort to formulate appropriate use criteria for image-guided injections and radiofrequency procedures in the diagnosis and treatment of sacroiliac joint and posterior sacroiliac complex pain. The Spine Intervention Society convened a multisociety effort to guide physicians and define for payers the appropriate use of image-guided injections and radiofrequency procedures. An evidence panel was established to write systematic reviews, define key terms and assumptions, and develop clinical scenarios to be addressed. The rating panel considered the evidence presented in the systematic reviews, carefully reviewed the definitions and assumptions, and rated the clinical scenarios. Final median ratings, in combination with the level of agreement, determined the final ratings for the appropriate use of sacroiliac injections and radiofrequency neurotomy. More than 10,000 scenarios were addressed in the appropriate use criteria and are housed within five modules in the portal, available on the Spine Intervention Society website: Module 1: Clinical Indications and Imaging; Module 2: Anticoagulants; Module 3: Timing of Injections; Module 4: Number of Injections; and Module 5: Lateral Branch Radiofrequency Neurotomy. Within several of these modules, several issues of interest are identified and discussed. Physicians and payers can access the appropriate use criteria portal on the Spine Intervention Society's website and select specific clinical indications for a particular patient in order to learn more about the appropriateness of the intervention(s) under consideration. © 2017 American Academy of Pain Medicine. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com

High Efficiency, High Density Terrestrial Panel. [for solar cell modules

Science.gov (United States)

Wohlgemuth, J.; Wihl, M.; Rosenfield, T.

1979-01-01

Terrestrial panels were fabricated using rectangular cells. Packing densities in excess of 90% with panel conversion efficiencies greater than 13% were obtained. Higher density panels can be produced on a cost competitive basis with the standard salami panels.

Predicting panel scores by linguistic analysis

Energy Technology Data Exchange (ETDEWEB)

Van den Besselaar, P.; Stout, L.; Gou, X

2016-07-01

In this paper we explore the use of text analysis for deriving quality indicators of project proposals. We do full text analysis of 3030 review reports. After term extraction, we aggregate the term occurrences to linguistic categories. Using thse linguistic categories as independent variables, we study how well these predict the grading by the review panels. Together, the different linguistic categories explain about 50% of the variance in the grading of the applications. The relative importance of the different linguistic categories inform us about the way the panels work. This can be used to develop altmetrics for the quality of the peer and panel review processes. (Author)

Solar Panel based Milk Pasteurization

DEFF Research Database (Denmark)

Nielsen, Kirsten Mølgaard; Pedersen, Tom Søndergaard

This paper treats the subject of analysis, design and development of the control system for a solar panel based milk pasteurization system to be used in small villages in Tanzania. The analysis deals with the demands for an acceptable pasteurization, the varying energy supply and the low cost, low...... complexity, simple user interface and high reliability demands. Based on these demands a concept for the pasteurization system is established and a control system is developed. A solar panel has been constructed and the energy absorption has been tested in Tanzania. Based on the test, the pasteurization...... system is dimensioned. A functional prototype of the pasteurization facility with a capacity of 200 l milk/hour has been developed and tested. The system is prepared for solar panels as the main energy source and is ready for a test in Tanzania....

Solar Panel based Milk Pasteurization

DEFF Research Database (Denmark)

Nielsen, Kirsten Mølgaard; Pedersen, Tom Søndergaard

2002-01-01

This paper treats the subject of analysis, design and development of the control system for a solar panel based milk pasteurization system to be used in small villages in Tanzania. The analysis deals with the demands for an acceptable pasteurization, the varying energy supply and the low cost, low...... complexity, simple user interface and high reliability demands. Based on these demands a concept for the pasteurization system is established and a control system is developed. A solar panel has been constructed and the energy absorption has been tested in Tanzania. Based on the test, the pasteurization...... system is dimensioned. A functional prototype of the pasteurization facility with a capacity of 200 l milk/hour has been developed and tested. The system is prepared for solar panels as the main energy source and is ready for a test in Tanzania....

Quality assurance grading criteria for plant systems and components: Results from a pilot plant project at Grand Gulf Nuclear Station. Final report

International Nuclear Information System (INIS)

Parkinson, W.J.

1995-12-01

As part of the original design of a nuclear power plant, the NSSS vendor, architect/engineer and utility identified structures, systems and components (SSCs) as safety related and assigned them to a Q-list. A Q-list is usually very large, e.g. 75,000 components, which creates large ongoing annual operating costs for the utility. Operating experience and the greater knowledge of plant systems safety accumulated during the past 20 years have suggested that many components are not truly important to safety and do not warrant the Q-classification and the associated costs. The completion of Probabilistic Safety Analyses (PSAs) for many nuclear power plants has contributed to this greater knowledge. This report describes a practical application of PSA technology to modify the existing QA program at the Grand Gulf Nuclear Station. Section 1 introduces the term, QA Safety Significant (QASS), and relates it to the existing term, ''safety related''. Section 2 describes six deterministic criteria as a basis for classifying systems as QASS or non-QASS. An expert panel reviewed 421 systems at Grand Gulf Nuclear Station and identified 42 of them as QASS. All components in non-QASS systems are classified as non-QASS. For QASS systems, Section 3 describes five deterministic criteria for classifying components as QASS or non-QASS. By using these two sets of criteria, the expert panel found that the number of components requiring full QA compliance could be reduced by 24%. These results are summarized in Section 4

WISC-III e WAIS-III na avaliação da inteligência de cegos WISC-III/WAIS-III en ciegos WISC-III and WAIS-III in intellectual assessment of blind people

Directory of Open Access Journals (Sweden)

Elizabeth do Nascimento

2007-12-01

Full Text Available Diante da escassez de pesquisas nacionais e de testes psicológicos destinados a avaliar pessoas cegas, desenvolveu-se um estudo psicométrico com as escalas verbais dos testes WISC-III e WAIS-III. Após as adaptações de alguns estímulos e das instruções, os testes foram aplicados em crianças (N = 120 e adultos (N = 52 residentes em Belo Horizonte. Os resultados indicaram que as escalas verbais modificadas apresentam uma boa consistência interna (alfa> 0,80. Além disso, a investigação da validade fatorial identifica a presença clara de apenas um componente. Este componente explica 81% e 64% para o WISC-III e WAIS-III, respectivamente. Conclui-se que as adaptações a que se procedeu não afetaram a estrutura fatorial das escalas. Deste modo, os profissionais poderão utilizar as escalas modificadas para avaliar a inteligência de pessoas cegas.Frente a la escasez de investigaciones nacionales asi como la ausencia de tests psicológicos que evaluen personas ciegas, se ha desarrollado un estudio psicometrico com la escalas verbales del WISC-III y WAIS-III. Posteriormente a las adaptaciones de algunos estímulos y de las instrucciones, las escalas fueron aplicadas a una muestra de niños (n=120 y de adultos (n=52 residentes en la ciudad de Belo Horizonte-Brasil. Los resultados indican que las escalas verbales modificadas presentan una alta fiabilidad (alpha >0,80 asi como la presencia clara de un unico componente responsable por 81% y 64% de la variancia del WIC-III e WAIS-III respectivamente. Se ha concluido que las modificaciones efectuadas no han comprometido la estructura factorial de las escalas verbales. Por tanto, los profesionales psicólogos pueden utilizar las escalas modificadas para la evaluación de la inteligencia de personas portadoras de ceguera.Owing to the almost lack of a national research on psychological testing for the evaluation of blind people, a psychometric study has been developed with the WISC-III and WAIS-III

Multi criteria sizing approach for Photovoltaic Thermal collectors supplying desalination plant

International Nuclear Information System (INIS)

Ammous, Mahmoud; Chaabene, Maher

2015-01-01

Highlights: • Concept of reverse osmosis desalination plant supplied by hybrid collectors. • Energy consumption optimization. • Plant modeling. • Sizing approach for a desalination plant supplied by hybrid collectors. - Abstract: Reverse osmosis desalination plants require both thermal and electrical energies in order to produce water. As Photovoltaic Thermal panels are able to provide the two energies, they become suitable to supply reverse osmosis plants mainly while installed in remote areas. Autonomous based desalination plants must be optimally sized to meet the criteria related to the reverse osmosis operating temperature, the plant autonomy, the needed water, etc. This paper presents a sizing approach for Photovoltaic Thermal collectors supplying reverse osmosis desalination plant to compute the optimal surface of Photovoltaic Thermal collectors and the tank volume with respect to the operating criteria. The approach is composed of three optimization consideration steps: the monthly average data, the fulfillment of the water need and a three day of autonomy for the water tank volume. The algorithm is tested for a case of study of 10 ha of tomato irrigation. The results converged to 700 m 2 of Photovoltaic Thermal collector’s surface and 3000 m 3 of water tank volume

SU-E-T-164: Clinical Implementation of ASi EPID Panels for QA of IMRT/VMAT Plans.

Science.gov (United States)

Hosier, K; Wu, C; Beck, K; Radevic, M; Asche, D; Bareng, J; Kroner, A; Lehmann, J; Logsdon, M; Dutton, S; Rosenthal, S

2012-06-01

To investigate various issues for clinical implementation of aSi EPID panels for IMRT/VMAT QA. Six linacs are used in our clinic for EPID-based plan QA; two Varian Truebeams, two Varian 2100 series, two Elekta Infiniti series. Multiple corrections must be accounted for in the calibration of each panel for dosimetric use. Varian aSi panels are calibrated with standard dark field, flood field, and 40×40 diagonal profile for beam profile correction. Additional corrections to account for off-axis and support arm backscatter are needed for larger field sizes. Since Elekta iViewGT system does not export gantry angle with images, a third-party inclinometer must be physically mounted to back of linac gantry and synchronized with data acquisition via iViewGT PC clock. A T/2 offset correctly correlates image and gantry angle for arc plans due to iView image time stamp at the end of data acquisition for each image. For both Varian and Elekta panels, a 5 MU 10×10 calibration field is used to account for the nonlinear MU to dose response at higher energies. Acquired EPID images are deconvolved via a high pass filter in Fourier space and resultant fluence maps are used to reconstruct a 3D dose 'delivered' to patient using DosimetryCheck. Results are compared to patient 3D dose computed by TPS using a 3D-gamma analysis. 120 IMRT and 100 VMAT cases are reported. Two 3D gamma quantities (Gamma(V10) and Gamma(PTV)) are proposed for evaluating QA results. The Gamma(PTV) is sensitive to MLC offsets while Gamma(V10) is sensitive to gantry rotations. When a 3mm/3% criteria and 90% or higher 3D gamma pass rate is used, all IMRT and 90% of VMAT QA pass QA. After appropriate calibration of aSi panels and setup of image acquisition systems, EPID based 3D dose reconstruction method is found clinically feasible. © 2012 American Association of Physicists in Medicine.

[Combination of NAFLD Fibrosis Score and liver stiffness measurement for identification of moderate fibrosis stages (II & III) in non-alcoholic fatty liver disease].

Science.gov (United States)

Drolz, Andreas; Wehmeyer, Malte; Diedrich, Tom; Piecha, Felix; Schulze Zur Wiesch, Julian; Kluwe, Johannes

2018-01-01

Non-alcoholic fatty liver disease (NAFLD) has become one of the most frequent causes of chronic liver disease. Currently, therapeutic options for NAFLD patients are limited, but new pharmacologic agents are being investigated in the course of clinical trials. Because most of these studies are focusing on patients with fibrosis stages II and III (according to Kleiner), non-invasive identification of patients with intermediate fibrosis stages (II and III) is of increasing interest. Evaluation of NAFLD Fibrosis Score (NFS) and liver stiffness measurement (LSM) for prediction of fibrosis stages II/III. Patients with histologically confirmed NAFLD diagnosis were included in the study. All patients underwent a clinical and laboratory examination as well as a LSM prior to liver biopsy. Predictive value of NFS and LSM with respect to identification of fibrosis stages II/III was assessed. 134 NAFLD patients were included and analyzed. Median age was 53 (IQR 36 - 60) years, 55 patients (41 %) were female. 82 % of our patients were overweight/obese with typical aspects of metabolic syndrome. 84 patients (66 %) had liver fibrosis, 42 (50 %) advanced fibrosis. LSM and NFS correlated with fibrosis stage (r = 0.696 and r = 0.685, respectively; p stages II/III. If both criteria were met, probability of fibrosis stage II/III was 61 %. If none of the two criteria was met, chance for fibrosis stage II/III was only 6 % (negative predictive value 94 %). Combination of LSM and NFS enables identification of patients with significant probability of fibrosis stage II/III. Accordingly, these tests, especially in combination, may be a suitable screening tool for fibrosis stages II/III in NAFLD. The use of these non-invasive methods might also help to avoid unnecessary biopsies. © Georg Thieme Verlag KG Stuttgart · New York.

Performance of patch repaired composite panels under fatigue loads

International Nuclear Information System (INIS)

Darwish, Feras H.; Hamoush, S.; Shivakumar, K.

2006-01-01

This paper evaluates the performance of bonded patch-scarf repairs of full scale laminated composite panels under cyclic load conditions. Nondestructive testing to characterize the quality of repairs and destructive testing to evaluate the performance of repaired panels were used in this study. Carbon/Epoxy prepreg material used was used to lay up six-ply (12 in. x 27 in. /305x686mm) (-60/60/0) s quasi-isotropic laminates. 7-ply scarf repair with a gradient of 0.5 inch (12.7mm) per layer was used to perform the repair of a damaged zone. The patch consisted of 7.5 inches (190mm) diameter adhesive film, 1 inch (25.4mm) diameter filler ply at 90fiber orientation, and six plies (2-7 inches (51-178mm) diameter) to match the lay-up of the parent material. The study was extended to include defective repairs. The defect was engineered by inserting a 1 inch (25.4 mm) circular Teflon flaw between the fifth and sixth layers of the patch. A total of 28 panels were prepared and divided into five categories: (1) three pristine panels (undamaged parental materials); (2) three damaged panels (1-inch-centered-hole); (3) two repaired panels with wrong fiber orientation; (4) nine good repaired panels, and (5) eleven defective repair panels (1 inch flaw). A nondestructive evaluation to check the conditions of the repairs was performed on most of the tested panels that include the pulse-echo C-scan and pseudo through transmission air coupled and water coupled C-scan. Based on the results of the experimental evaluation of this study, good repair restored 95% of the tensile strength while defective repair restored 90% of the tensile strength of the pristine panels. Under fatigue loading, panels repaired with a 1 inch delamination flaw within the patch layers showed a major reduction in fatigue life compared to the good repair panels under similar loading conditions. (author)

Planarity certification of ATLAS Micromegas detector panels

Energy Technology Data Exchange (ETDEWEB)

Mueller, Ralph; Biebel, Otmar; Bortfeldt, Jonathan; Flierl, Bernhard; Hertenberger, Ralf; Loesel, Philipp; Herrmann, Maximilian [LMU Muenchen (Germany); Zibell, Andre [JMU Wuerzburg (Germany)

2016-07-01

During the second long LHC shutdown, 2019/20, the precision tracking detectors of the ATLAS muon spectrometer in the inner end caps will be replaced using Micromegas, a planar gas-detector technology. Modules of 2 m{sup 2} area are built in quadruplets from five precisely planar sandwich panels that define the anodes and the cathodes of the four active detector planes. A panel is composed of three consecutive layers FR4 - aluminum honeycomb - FR4. Single plane spatial particle resolution below 100 μm is achievable when the deviations from planarity of the strip-anodes do not exceed 80 μm RMS over the whole active area and the parallelism of the readout strips is within 30 μm. In order to measure the dimensional accuracy of each panel, laser distance sensors combined with a coordinate measurement system have been investigated. The sensor requirements to measure the planarity of the panels are a resolution of 0.3 μm and a beam spot diameter of ∼20 μm, well below 100 μ m the size of the smallest structures. We report on achieved planarities of the panels and the performance of the laser sensor system. A panel with an RMS better than 30 μm was build and the evolution of its planarity due to humidity and temperature effects is shown.

Flat-panel detectors in x-ray diagnosis

International Nuclear Information System (INIS)

Spahn, M.; Heer, V.; Freytag, R.

2003-01-01

For all application segments X-ray systems with flat-panel detectors increasingly enter the market. In digital radiography, mammography and cardiologic angiography flat-panel detectors are already well established while they are made ready for market introduction in general angiography and fluoroscopy. Two flat-panel detector technologies are available. One technology is based on an indirect conversion process of X-rays while the other one uses a direct conversion method.For radiography and dynamic applications the indirect method provides substantial advantages, while the direct method has some benefits for mammography. In radiography and mammography flat-panel detectors lead to clear improvements with respect to workflow, image quality and dose reduction potentials. These improvements are fostered by the immediate availability of the image, the large dynamic range and the high sensitivity to X-rays. New applications and the use of complex image processing algorithms have the potential to enlarge the present diagnostic range of applications.Up to now, image intensifiers are still the well-established technology for angiography and fluoroscopy. Nevertheless flat-panel detectors begin to enter this field, especially in cardiologic angiography.Characteristics of flat-panel detectors such as the availability of distortion-free images, the excellent contrast resolution, the large dynamic range, the high sensitivity to X-rays and the usability in magnetic fields provide the basis for improved and new diagnostic and interventional methods. (orig.) [de

Incremental Validity of the DSM-5 Section III Personality Disorder Traits With Respect to Psychosocial Impairment.

Science.gov (United States)

Simms, Leonard J; Calabrese, William R

2016-02-01

Traditional personality disorders (PDs) are associated with significant psychosocial impairment. DSM-5 Section III includes an alternative hybrid personality disorder (PD) classification approach, with both type and trait elements, but relatively little is known about the impairments associated with Section III traits. Our objective was to study the incremental validity of Section III traits--compared to normal-range traits, traditional PD criterion counts, and common psychiatric symptomatology--in predicting psychosocial impairment. To that end, 628 current/recent psychiatric patients completed measures of PD traits, normal-range traits, traditional PD criteria, psychiatric symptomatology, and psychosocial impairments. Hierarchical regressions revealed that Section III PD traits incrementally predicted psychosocial impairment over normal-range personality traits, PD criterion counts, and common psychiatric symptomatology. In contrast, the incremental effects for normal-range traits, PD symptom counts, and common psychiatric symptomatology were substantially smaller than for PD traits. These findings have implications for PD classification and the impairment literature more generally.

A Statewide Collaboration: Ohio Level III Trauma Centers' Approach to the Development of a Benchmarking System.

Science.gov (United States)

Lang, Carrie L; Simon, Diane; Kilgore, Jane

The American College of Surgeons Committee on Trauma revised the Resources for Optimal Care of the Injured Patient to include the criteria for trauma centers to participate in a risk-adjusted benchmarking system. Trauma Quality Improvement Program is currently the risk-adjusted benchmarking program sponsored by the American College of Surgeons, which will be required of all trauma centers to participate in early 2017. Prior to this, there were no risk-adjusted programs for Level III verified trauma centers. The Ohio Society of Trauma Nurse Leaders is a collaborative group made up of trauma program managers, coordinators, and other trauma leaders who meet 6 times a year. Within this group, a Level III Subcommittee was formed initially to provide a place for the Level III centers to discuss issues specific to the Level III centers. When the new requirement regarding risk-adjustment became official, the subcommittee agreed to begin reporting simple data points with the idea to risk adjust in the future.

Interpretation criteria for FDG PET/CT in multiple myeloma (IMPeTUs): final results. IMPeTUs (Italian myeloma criteria for PET USe).

Science.gov (United States)

Nanni, Cristina; Versari, Annibale; Chauvie, Stephane; Bertone, Elisa; Bianchi, Andrea; Rensi, Marco; Bellò, Marilena; Gallamini, Andrea; Patriarca, Francesca; Gay, Francesca; Gamberi, Barbara; Ghedini, Pietro; Cavo, Michele; Fanti, Stefano; Zamagni, Elena

2018-05-01

ᅟ: FDG PET/CT ( 18 F-fluoro-deoxy-glucose positron emission tomography/computed tomography) is a useful tool to image multiple myeloma (MM). However, simple and reproducible reporting criteria are still lacking and there is the need for harmonization. Recently, a group of Italian nuclear medicine experts defined new visual descriptive criteria (Italian Myeloma criteria for Pet Use: IMPeTUs) to standardize FDG PET/CT evaluation in MM patients. The aim of this study was to assess IMPeTUs reproducibility on a large prospective cohort of MM patients. Patients affected by symptomatic MM who had performed an FDG PET/CT at baseline (PET0), after induction (PET-AI), and the end of treatment (PET-EoT) were prospectively enrolled in a multicenter trial (EMN02)(NCT01910987; MMY3033). After anonymization, PET images were uploaded in the web platform WIDEN® and hence distributed to five expert nuclear medicine reviewers for a blinded independent central review according to the IMPeTUs criteria. Consensus among reviewers was measured by the percentage of agreement and the Krippendorff's alpha. Furthermore, on a patient-based analysis, the concordance among all the reviewers in terms of positivity or negativity of the FDG PET/CT scan was tested for different thresholds of positivity (Deauville score (DS 2, 3, 4, 5) for the main parameters (bone marrow, focal score, extra-medullary disease). Eighty-six patients (211 FDG PET/CT scans) were included in this analysis. Median patient age was 58 years (range, 35-66 years), 45% were male, 15% of them were in stage ISS (International Staging System) III, and 42% had high-risk cytogenetics. The percentage agreement was superior to 75% for all the time points, reaching 100% of agreement in assessing the presence skull lesions after therapy. Comparable results were obtained when the agreement analysis was performed using the Krippendorff's alpha coefficient, either in every single time point of scanning (PET0, PET-AI or PET-EoT) or

[Changes introduced into the recent International Classification of Headache Disorders: ICHD-III beta classification].

Science.gov (United States)

Belvis, Robert; Mas, Natàlia; Roig, Carles

2015-01-16

The International Headache Society (IHS) has published the third edition of the International Classification of Headache Disorders (ICHD-III beta), the most commonly used guide to diagnosing headaches in the world. To review the recent additions to the guide, to explain the new entities that appear in it and to compare the conditions that have had their criteria further clarified against the criteria in the previous edition. We have recorded a large number of clarifications in the criteria in practically all the headaches and neuralgias in the classification, but the conditions that have undergone the most significant clarifications are chronic migraine, primary headache associated with sexual activity, short-lasting unilateral neuralgiform headache attacks, new daily persistent headache, medication-overuse headache, syndrome of transient headache and neurological deficits with cerebrospinal fluid lymphocytosis. The most notable new entities that have been incorporated are external-compression headache, cold-stimulus headache, nummular headache, headache attributed to aeroplane travel and headache attributed to autonomic dysreflexia. Another point to be highlighted is the case of the new headaches (still not considered entities in their own right) included in the appendix, some of the most noteworthy being epicrania fugax, vestibular migraine and infantile colic. The IHS recommends no longer using the previous classification and changing over to the new classification (ICHD-III beta) in healthcare, teaching and research, in addition to making this new guide as widely known as possible.

Progress report: The Energy and Industry Subgroup of IPCC Working Group III

International Nuclear Information System (INIS)

Yokobori, Keiichi

1990-01-01

The Intergovernmental Panel on Climate Change (IPCC) was established in November 1988 under the joint auspices of UNEP and the World Meteorological Organization (WMO). Working Group III, or the Response Strategies Working Group (RSWG), was established to formulate strategies to respond to challenges arising from global climate warming. The Energy and Industry Subgroup (EIS) was created by the RSWG at its meeting in January-February 1989 to facilitate the formulation of strategies to control, i.e. prevent or reduce, the accumulation of greenhouse gases (GHGs) such as CO 2 , CFCs, NO 2 , CH, etc. The following article gives a brief summary of EIS activities, based mainly on records of discussion at the relevant meetings. (author). 1 tab

Hepatitis Panel: MedlinePlus Lab Test Information

Science.gov (United States)

... this page: https://medlineplus.gov/labtests/hepatitispanel.html Hepatitis Panel To use the sharing features on this page, please enable JavaScript. What is a Hepatitis Panel? Hepatitis is a type of liver disease. ...

National Estimates of Exposure to Traumatic Events and PTSD Prevalence Using DSM-IV and DSM-5 Criteria

Science.gov (United States)

Kilpatrick, Dean G.; Resnick, Heidi S.; Milanak, Melissa E.; Miller, Mark W.; Keyes, Katherine M.; Friedman, Matthew J.

2014-01-01

Prevalence of posttraumatic stress disorder (PTSD) defined according to the American Psychiatric Association’s Diagnostic and Statistical Manual fifth edition (DSM-5; 2013) and fourth edition (DSM-IV; 1994) was compared in a national sample of U.S. adults (N = 2,953) recruited from an online panel. Exposure to traumatic events, PTSD symptoms, and functional impairment were assessed online using a highly structured, self-administered survey. Traumatic event exposure using DSM-5 criteria was high (89.7%), and exposure to multiple traumatic event types was the norm. PTSD caseness was determined using Same Event (i.e., all symptom criteria met to the same event type) and Composite Event (i.e., symptom criteria met to a combination of event types) definitions. Lifetime, past-12-month, and past 6-month PTSD prevalence using the Same Event definition for DSM-5 was 8.3%, 4.7%, and 3.8% respectively. All 6 DSM-5 prevalence estimates were slightly lower than their DSM-IV counterparts, although only 2 of these differences were statistically significant. DSM-5 PTSD prevalence was higher among women than among men, and prevalence increased with greater traumatic event exposure. Major reasons individuals met DSM-IV criteria, but not DSM-5 criteria were the exclusion of nonaccidental, nonviolent deaths from Criterion A, and the new requirement of at least 1 active avoidance symptom. PMID:24151000

Increasing the efficiency of solar thermal panels

Science.gov (United States)

Dobrnjac, M.; Latinović, T.; Dobrnjac, S.; Živković, P.

2016-08-01

The popularity of solar heating systems is increasing for several reasons. These systems are reliable, adaptable and pollution-free, because the renewable solar energy is used. There are many variants of solar systems in the market mainly constructed with copper pipes and absorbers with different quality of absorption surface. Taking into account the advantages and disadvantages of existing solutions, in order to increase efficiency and improve the design of solar panel, the innovative solution has been done. This new solar panel presents connection of an attractive design and the use of constructive appropriate materials with special geometric shapes. Hydraulic and thermotechnical tests that have been performed on this panel showed high hydraulic and structural stability. Further development of the solar panel will be done in the future in order to improve some noticed disadvantages.

The effect of oblique angle of sound incidence, realistic edge conditions, curvature and in-plane panel stresses on the noise reduction characteristics of general aviation type panels

Science.gov (United States)

Grosveld, F.; Lameris, J.; Dunn, D.

1979-01-01

Experiments and a theoretical analysis were conducted to predict the noise reduction of inclined and curved panels. These predictions are compared to the experimental results with reasonable agreement between theory and experiment for panels under an oblique angle of sound incidence. Theoretical as well as experimental results indicate a big increase in noise reduction when a flat test panel is curved. Further curving the panel slightly decreases the noise reduction. Riveted flat panels are shown to give a higher noise reduction in the stiffness-controlled frequency region, while bonded panels are superior in this region when the test panel is curved. Experimentally measured noise reduction characteristics of flat aluminum panels with uniaxial in-plane stresses are presented and discussed. These test results indicate an important improvement in the noise reduction of these panels in the frequency range below the fundamental panel/cavity frequency.

Extraction and separation studies of Ga(III, In(III and Tl(III using the neutral organophosphorous extractant, Cyanex-923

Directory of Open Access Journals (Sweden)

P. M. DHADKE

2003-07-01

Full Text Available The neutral extractant, Cyanes-923 has been used for the extraction and separation of gallium(III, indium(III and thallium(III from acidic solution. These metal ions were found to be quantitatively extracted with Cyanex-923 in toluene in the pH range 4.5–5.5, 5.0–6.5 and 1.5–3.0, respectively, and from the organic phase they can be stripped with 2.0 mol dm-3 HNO3, 3.0 mol dm-3 HNO3 and 3.0 mol dm-3 HCl, respectively. The effect of pH equilibration period, diluents, diverse ions and stripping agents on the extraction of Ga(III, In(III and Tl(III has been studied. The stroichiometry of the extracted species of these metal ions was determined on the basis of the slope analysis method. The reaction proceed by solvation and the probable extracted species found were [MCl3. 3Cyanex-923] [where M = Ga(III or In(III ] and [HTlCl4. 3Cyanex-923]. Based on these results a sequential procedure for the separation of Ga(III, In(III and Tl(III from each other was developed.

Documentation Panels Enhance Teacher Education Programs

Science.gov (United States)

Warash, Bobbie Gibson

2005-01-01

Documentation of children's projects is advantageous to their learning process and is also a good method for student teachers to observe the process of learning. Documentation panels are a unique way to help student teachers understand how children learn. Completing a panel requires a student teacher to think through a process. Teachers must learn…

Evaluation of the Precision ID Ancestry Panel for crime case work

DEFF Research Database (Denmark)

Pereira, Vania; Mogensen, Helle S; Børsting, Claus

2017-01-01

The application of massive parallel sequencing (MPS) methodologies in forensic genetics is promising and it is gradually being implemented in forensic genetic case work. One of the major advantages of these technologies is that several traditional electrophoresis assays can be combined into one...... single MPS assay. This reduces both the amount of sample used and the time of the investigations. This study assessed the utility of the Precision ID Ancestry Panel (Thermo Fisher Scientific, Waltham, USA) in forensic genetics. This assay was developed for the Ion Torrent PGM™ System and genotypes 165...... ancestry informative SNPs. The performance of the assay and the accompanying software solution for ancestry inference was assessed by typing 142 Danes and 98 Somalis. Locus balance, heterozygote balance, and noise levels were calculated and future analysis criteria for crime case work were estimated...

Experimental and numerical results from hybrid retrofitted photovoltaic panels

International Nuclear Information System (INIS)

Rossi, Cecilia; Tagliafico, Luca A.; Scarpa, Federico; Bianco, Vincenzo

2013-01-01

Highlights: • The experimental study focuses on the feasibility of hybrid PV/T panels retrofitting. • The critical role of a thin layer of air between PV panel and back plate is evidenced. • The benefit of the addition of a conductive paste layer is analyzed via FEM simulations. • The use of wood ribs to stick the back plate represents a cheap effective solution. - Abstract: The aim of present study is to investigate different methodologies to achieve a better contact between a photovoltaic panel and a thermal plate, in order to cool the PV panel by means of water in the perspective of coupling it with a heat pump. It is believed that this kind of system allows to obtain a higher energy efficiency. The analysis is developed both experimentally and numerically, testing different kinds of configurations in different operating conditions. Simulations are employed to analyze the effect of the variations of the contact resistance between the panel and the thermal plates, demonstrating that the use of a conductive paste increases the overall performance of the panel. Results show interesting possibilities in terms of retrofitting of existing photovoltaic panels by employing very simple solutions, such as to fix the thermal plate on the rear of the panel by means of wood ribs

TWRS vadose zone contamination issue expert panel report

Energy Technology Data Exchange (ETDEWEB)

Shafer, D.S.

1997-05-01

When members were first canvassed for participation in the Vadose Zone Expert Panel the stated purpose for convening the Panel was to review a controversial draft report, the SX Tank Farm Report. This report was produced by a DOE Grand Junction Project Office (GJPO) contractor, RUST Geotech, now MACTEC-ERS, for the DOE Richland Office (DOERL). Three meetings were planned for June, July and August, 1995 to review the draft report and to complete a Panel report by mid-September. The Expert Panel has found its efforts confounded by various non-technical issues. The Expert Panel has chosen to address some of the non-technical issues in this Preface rather than to dilute the technical discussion that follows in the body of this independent expert panel status report (Panel Report). Rather than performing a straightforward manuscript review, the Panel was asked to resolve conflicting interpretations of gamma-ray logging measurements performed in vadose zone boreholes (drywells) surrounding the high-level radioactive wastes of the SX tank farm. There are numerous and complex technical issues that must be evaluated before the vertical and radial extent of contaminant migration at the SX tank farm can be accurately assessed. When the Panel first met in early June, 1996, it quickly became apparent that the scientific and technical issues were obscured by policy and institutional affairs which have polarized discussion among various segments of the Hanford organization. This situation reflects the kinds of institutional problems described separately in reports by the National Research Council of the National Academy of Sciences (NAS/NRC), The Hanford Tanks Environmental Impacts and Policy Choices and BmTiers to Science: Technical Management of the Department of Energy Environmental Remediation Program. The Vadose Zone Characterization Program, appears to be caught between conflicting pressures and organizational mandates, some imposed from outside DOE-RL and some self

Potentiometric studies on some ternary complexes of Nd(III), Sm(III), Gd(III) and Ho(III) with cyclohexanediaminetetraacetic acid as primary ligand

International Nuclear Information System (INIS)

Marathe, D.G.; Munshi, K.N.

1983-01-01

The formation constants of the ternary complexes of neodymium(III), samarium(III), gadlonium(III) and holmium(III) with cyclohexanediaminetetraacetic acid (CyDTA) as primary ligand and dihydroxynaphthalene (DHN), dihydroxynaphthalene-6-sulphonic acid (DHNSA) and cateechol-3,5-disulphonic acid (CDSA) as secondary ligands have been investigated by potentiometric titration technique. The secondary ligands have been investigated by potentiometric titration technique. The values of formation constants of 1:1:1 ternary chelates are reported at three different temperatures, and at a fixed ionic strength, μ = 0.1 M (NaClO 4 ). (author)

Family Medicine Panel Size with Care Teams: Impact on Quality.

Science.gov (United States)

Angstman, Kurt B; Horn, Jennifer L; Bernard, Matthew E; Kresin, Molly M; Klavetter, Eric W; Maxson, Julie; Willis, Floyd B; Grover, Michael L; Bryan, Michael J; Thacher, Tom D

2016-01-01

The demand for comprehensive primary health care continues to expand. The development of team-based practice allows for improved capacity within a collective, collaborative environment. Our hypothesis was to determine the relationship between panel size and access, quality, patient satisfaction, and cost in a large family medicine group practice using a team-based care model. Data were retrospectively collected from 36 family physicians and included total panel size of patients, percentage of time spent on patient care, cost of care, access metrics, diabetic quality metrics, patient satisfaction surveys, and patient care complexity scores. We used linear regression analysis to assess the relationship between adjusted physician panel size, panel complexity, and outcomes. The third available appointments (P size. Patient satisfaction, cost, and percentage fill rate were not affected by panel size. A physician-adjusted panel size larger than the current mean (2959 patients) was associated with a greater likelihood of poor-quality rankings (≤25th percentile) compared with those with a less than average panel size (odds ratio [OR], 7.61; 95% confidence interval [CI], 1.13-51.46). Increased panel size was associated with a longer time to the third available appointment (OR, 10.9; 95% CI, 1.36-87.26) compared with physicians with panel sizes smaller than the mean. We demonstrated a negative impact of larger panel size on diabetic quality results and available appointment access. Evaluation of a family medicine practice parameters while controlling for panel size and patient complexity may help determine the optimal panel size for a practice. © Copyright 2016 by the American Board of Family Medicine.

Prevalence of Metabolic Syndrome and Affecting Factors among Individuals Aged 30 and over in Balçova District of İzmir

Directory of Open Access Journals (Sweden)

Ahmet Soysal

2016-06-01

Full Text Available Background: The studies have shown that metabolic syndrome (MetS leads to an increase twice as much in cardiovascular diseases (CVD and four times as much in diabetes mellitus (DM prevalence since the second half of the 20th century. Aims: This study aims to determine and discuss the prevalence of the MetS and co- factors among individuals at the age of 30 and over in Balcova district of İzmir province according to the American National Cholesterol Education Program - Adult Treatment Panel III (NCEP ATP III and InternationalDiabetes Federation (IDF criteria. Study Design: Cross-sectional study. Methods: Data obtained from the Balcova Heart Project in İzmir were used in the study. The dependent variable of the study is MetS existence. The independent variables were socio-demographic characteristics (age, gender, education level, and marital status, self-perceived economic status, physical activity, smoking status, healthy nutrition and body mass index (BMI. Results: The prevalence of MetS was 36.9% according to the diagnostic criteria of IDF, while it was 27.4% according to ATP III criteria. According to the both criteria, increasing age, low education, poor economic status perception, physical inactivity, and obesity increase the risk of MetS. Apart from the IDF criteria, being female and a current smoker increase the risk of the MetS in the NCEP-ATP III. Conclusion: Compared to educational studies of MetS as of today, which are community and health-oriented studies, it is challenging that the prevalence of MetS was found to be high for both criteria in our study. Therefore, in particular, primary health care doctors must be prompted to protect the public against DM and CVD in particular.

Solvent effects on extraction of aluminum(III), gallium(III), and indium(III), with decanoic acid

International Nuclear Information System (INIS)

Yamada, Hiromichi; Hayashi, Hisao; Fujii, Yukio; Mizuta, Masateru

1986-01-01

Extraction of aluminum(III) and indium(III) with decanoic acid in 1-octanol was carried out at 25 deg C and at an aqueous ionic strength of 0.1 mol dm -3 (NaClO 4 ). Monomeric and tetrameric aluminum(III) decanoates and monomeric indium(III) decanoate are responsible for the extraction. From a comparison of the present results with those obtained from the previous works, the polymerization of the extracted species was found to be more extensive in benzene than in 1-octanol, and the metal decanoates were highly polymerized in the following order in both solvents: Al > Ga > In. (author)

FPGA Implementation of Multilayer Perceptron for Modeling of Photovoltaic panel

International Nuclear Information System (INIS)

Mekki, H.; Belhout, K.; Mellit, A.; Salhi, H.

2008-01-01

The Number of electronic applications using artificial neural network-based solutions has increased considerably in the last few years. However, their applications in photovoltaic systems are very limited. This paper introduces the preliminary result of the modeling and simulation of photovoltaic panel based on neural network and VHDL-language. In fact, an experimental database of meteorological data (irradiation, temperature) and output electrical generation signals of the PV-panel (current and voltage) has been used in this study. The inputs of the ANN-PV-panel are the daily total irradiation and mean average temperature while the outputs are the current and voltage generated from the panel. Firstly, a dataset of 4x364 have been used for training the network. Subsequently, the neural network (MLP) corresponding to PV-panel is simulated using VHDL language based on the saved weights and bias of the network. Simulation results of the trained MLP-PV panel based on Matlab and VHDL are presented. The proposed PV-panel model based ANN and VHDL permit to evaluate the performance PV-panel using only the environmental factors and involves less computational efforts, and it can be used for predicting the output electrical energy from the PV-panel

The Improvement of Thermal Insulating Concrete Panel

Directory of Open Access Journals (Sweden)

Mohammed Ali Nasser Ali

2018-05-01

Full Text Available The Iraqi houses flattening the roof by a concrete panel, and because of the panels on the top directly exposed to the solar radiation become unbearably hot and cold during the summer and winter. The traditional concrete panel components are cement, sand, and aggregate, which have a poor thermal property. The usage of materials with low thermal conductivity with no negative reflects on its mechanical properties gives good improvements to the thermal properties of the concrete panel. The practical part of this work was built on a multi-stage mixing plan. In the first stage the mixing ratio based on the ratios of the sand to cement. The second stage mixing ratios based on replacing the coarse aggregate quantities with the Alabaster aggregates, and the third stage the mixing ratios based on the replacement of wood ash instead of the sand. While the fourth stage mixing ratios based on decreasing the thermal conductivity and increasing mechanical properties by adding a multilayer of a plastic net. The result shows that using a concrete panel with components (cement, sand, coarse aggregate, wood ash, and Alabaster aggregates with a mass ratio of (1:1:2:1:1 and 3-plastic layers, gives the best improvement of the thermal properties. Where, the thermal conductivity is reduced by 42% and the specific heat increased by 41.2% as compared to the traditional concrete panel mixing ratio, with mechanical properties are agreed with the Iraqi standards.

The gain of single-axis tracked panel according to extraterrestrial radiation

International Nuclear Information System (INIS)

Chang, T.P.

2009-01-01

In the present study, the gain in extraterrestrial radiation received by a single-axis tracked panel relative to a fixed panel was systematically analyzed over a specific period of time. The dynamic angle that the tracked panel should rotate by in order to follow the sun was derived through a series of spherical trigonometric procedures. The instantaneous incident angle of sunlight upon the panel was then calculated, assuming that the panel would simultaneously follow the sun's position. Thus, instantaneous increments of solar energy received by the tracked panel relative to the fixed panel are originally presented. The results show that the angle the tracked panel has to rotate by is 0 deg. at solar noon, and increases towards dawn or dusk. The incident angle of sunlight upon the tracked panel is always smaller than that upon the fixed panel, except at solar noon. As for panels installed with a yearly optimal tilt angle in Taipei, the gains are between 36.3% and 62.1% for four particular days of year, between 37.8% and 60.8% for the four seasons and 49.3% over the entire year. The amount of radiation collected by the tracked panel is enhanced as the maximum rotation angle is increased. The irradiation ratio of the tracked panel to the fixed panel is close to 1.5 for latitudes below 65 deg. and gradually increases for latitudes above this. The yearly optimal tilt angle of a south-facing fixed panel is approximately equal to 0.9 multiplied by the latitude (i.e. 0.9 x φ) for latitudes below 65 deg. and is about 56 + 0.4 x (φ - 65) otherwise

Automatic outdoor monitoring system for photovoltaic panels.

Science.gov (United States)

Stefancich, Marco; Simpson, Lin; Chiesa, Matteo

2016-05-01

Long-term acquisition of solar panel performance parameters, for panels operated at maximum power point in their real environment, is of critical importance in the photovoltaic research sector. However, few options exist for the characterization of non-standard panels such as concentrated photovoltaic systems, heavily soiled or shaded panels or those operating under non-standard spectral illumination; certainly, it is difficult to find such a measurement system that is flexible and affordable enough to be adopted by the smaller research institutes or universities. We present here an instrument aiming to fill this gap, autonomously tracking and maintaining any solar panel at maximum power point while continuously monitoring its operational parameters and dissipating the produced energy without connection to the power grid. The instrument allows periodic acquisition of current-voltage curves to verify the employed maximum power point tracking approach. At the same time, with hardware schematics and software code being provided, it provides a flexible open development environment for the monitoring of non-standard generators like concentrator photovoltaic systems and to test novel power tracking approaches. The key issues, and the corresponding solutions, encountered in the design are analyzed in detail and the relevant schematics presented.

Automatic outdoor monitoring system for photovoltaic panels

Energy Technology Data Exchange (ETDEWEB)